WorldWideScience

Sample records for rendered publications oral

  1. The international practices of services rendered to population by public and local authorities

    Directory of Open Access Journals (Sweden)

    A. B. Lys

    2015-09-01

    services, have been determined in the article: rethinking of public servants and employees of government of its functions based on the requirements, needs and aspirations of a newly liberalized and democratized society; the requirements of the formation of the staff of the competent administrative workers with post-industrial ideological and value system; significant increase ethical and intellectual potential of all staffing.

  2. Virtual reality system for treatment of the fear of public speaking using image-based rendering and moving pictures.

    Science.gov (United States)

    Lee, Jae M; Ku, Jeong H; Jang, Dong P; Kim, Dong H; Choi, Young H; Kim, In Y; Kim, Sun I

    2002-06-01

    The fear of speaking is often cited as the world's most common social phobia. The rapid growth of computer technology enabled us to use virtual reality (VR) for the treatment of the fear of public speaking. There have been two techniques used to construct a virtual environment for the treatment of the fear of public speaking: model-based and movie-based. Virtual audiences and virtual environments made by model-based technique are unrealistic and unnatural. The movie-based technique has a disadvantage in that each virtual audience cannot be controlled respectively, because all virtual audiences are included in one moving picture file. To address this disadvantage, this paper presents a virtual environment made by using image-based rendering (IBR) and chroma keying simultaneously. IBR enables us to make the virtual environment realistic because the images are stitched panoramically with the photos taken from a digital camera. And the use of chroma keying allows a virtual audience to be controlled individually. In addition, a real-time capture technique was applied in constructing the virtual environment to give the subjects more interaction, in that they can talk with a therapist or another subject.

  3. Quantum rendering

    Science.gov (United States)

    Lanzagorta, Marco O.; Gomez, Richard B.; Uhlmann, Jeffrey K.

    2003-08-01

    In recent years, computer graphics has emerged as a critical component of the scientific and engineering process, and it is recognized as an important computer science research area. Computer graphics are extensively used for a variety of aerospace and defense training systems and by Hollywood's special effects companies. All these applications require the computer graphics systems to produce high quality renderings of extremely large data sets in short periods of time. Much research has been done in "classical computing" toward the development of efficient methods and techniques to reduce the rendering time required for large datasets. Quantum Computing's unique algorithmic features offer the possibility of speeding up some of the known rendering algorithms currently used in computer graphics. In this paper we discuss possible implementations of quantum rendering algorithms. In particular, we concentrate on the implementation of Grover's quantum search algorithm for Z-buffering, ray-tracing, radiosity, and scene management techniques. We also compare the theoretical performance between the classical and quantum versions of the algorithms.

  4. Constructing public oral health policies in Brazil: issues for reflection

    Directory of Open Access Journals (Sweden)

    Catharina Leite Matos Soares

    2012-01-01

    Full Text Available This paper addresses the construction of public oral health policies in Brazil by reviewing the available literature. It includes a discussion of the social responses given by the Brazilian State to oral health policies and the relationship of these responses with the ideological oral health movements that have developed globally, and that have specifically influenced oral health policies in Brazil. The influence of these movements has affected a series of hegemonic practices originating from both Market Dentistry and Preventive and Social Dentistry in Brazil. Among the state activities that have been set into motion, the following stand out: the drafting of a law to regulate the fluoridation of the public water supply, and the fluoridation of commercial toothpaste in Brazil; epidemiological surveys to analyze the status of the Brazilian population's oral health; the inclusion of oral health in the Family Health Strategy (Estratégia de Saúde da Família - ESF; the drawing up of the National Oral Health Policy, Smiling Brazil (Brasil Sorridente. From the literature consulted, the progressive expansion of state intervention in oral health policies is observed. However, there remains a preponderance of hegemonic "dental" practices reproduced in the Unified Public Health Service (Sistema Único de Saúde - SUS and the Family Health Strategy.

  5. Oral health in the agenda of priorities in public health

    Science.gov (United States)

    Antunes, José Leopoldo Ferreira; Toporcov, Tatiana Natasha; Bastos, João Luiz; Frazão, Paulo; Narvai, Paulo Capel; Peres, Marco Aurélio

    2016-01-01

    ABSTRACT This study describes the scientific production on oral health diffused in Revista de Saúde Pública, in the 50 years of its publication. A narrative review study was carried out using PubMed, as it is the search database that indexes all issues of the journal. From 1967 to 2015, 162 manuscripts specifically focused on oral health themes were published. This theme was present in all volumes of the journal, with increasing participation over the years. Dental caries was the most studied theme, constantly present in the journal since its first issue. Periodontal disease, fluorosis, malocclusions, and other themes emerged even before the decline of dental caries indicators. Oral health policy is the most recurring theme in the last two decades. Revista de Saúde Pública has been an important vehicle for dissemination, communication, and reflection on oral health, contributing in a relevant way to the technical-scientific interaction between professionals in this field. PMID:27598787

  6. Oral health in the agenda of priorities in public health

    Directory of Open Access Journals (Sweden)

    José Leopoldo Ferreira Antunes

    2016-01-01

    Full Text Available ABSTRACT This study describes the scientific production on oral health diffused in Revista de Saúde Pública, in the 50 years of its publication. A narrative review study was carried out using PubMed, as it is the search database that indexes all issues of the journal. From 1967 to 2015, 162 manuscripts specifically focused on oral health themes were published. This theme was present in all volumes of the journal, with increasing participation over the years. Dental caries was the most studied theme, constantly present in the journal since its first issue. Periodontal disease, fluorosis, malocclusions, and other themes emerged even before the decline of dental caries indicators. Oral health policy is the most recurring theme in the last two decades. Revista de Saúde Pública has been an important vehicle for dissemination, communication, and reflection on oral health, contributing in a relevant way to the technical-scientific interaction between professionals in this field.

  7. [Brazilian bibliographical output on public oral health in public health and dentistry journals].

    Science.gov (United States)

    Celeste, Roger Keller; Warmling, Cristine Maria

    2014-06-01

    The scope of this paper is to describe characteristics of the scientific output in the area of public oral health in journals on public health and dentistry nationwide. The Scopus database of abstracts and quotations was used and eight journals in public health, as well as ten in dentistry, dating from 1947 to 2011 were selected. A research strategy using key words regarding oral health in public health and key words about public health in dentistry was used to locate articles. The themes selected were based on the frequency of key words. Of the total number of articles, 4.7% (n = 642) were found in oral health journals and 6.8% (n = 245) in public health journals. Among the authors who published most, only 12% published in both fields. There was a percentile growth of public oral health publications in dentistry journals, though not in public health journals. In dentistry, only studies indexed as being on the topic of epidemiology showed an increase. In the area of public health, planning was predominant in all the phases studied. Research to evaluate the impact of research and postgraduate policies in scientific production is required.

  8. Oral health among residents of publicly supported housing in Boston.

    Science.gov (United States)

    Maxwell, Nancy Irwin; Shah, Snehal; Dooley, Daniel; Henshaw, Michelle; Bowen, Deborah J

    2014-08-01

    Tooth loss in adults diminishes quality of daily life, affecting eating, speaking, appearance, and social interactions. Tooth loss is linked to severe periodontitis and caries; and to risk of stroke, cardiovascular disease, rheumatoid arthritis, and dementia. At the national (USA) level, poverty and African-American race have been linked to lower utilization of dental services, suggesting that the 7.5 million residents of publicly supported housing may be at risk of tooth loss and poor overall oral health. We assessed whether residence in publicly supported housing in Boston was associated with four oral health-related indicators. Compared to residents of nonpublicly supported housing, after adjusting for covariates residents of both public housing developments (PHDs) and rental assistance units (RAUs) had significantly lower odds of having had a dental cleaning in the past year (PHD, OR = 0.64 (95 % CI, 0.44-0.93); RAU, OR = 0.67 (95 % CI, 0.45-0.99))-despite parity in having had a past year dental visit. Further, residents of RAUs had double the odds of having had six or more teeth removed (OR = 2.20 (95 % CI, 1.39-3.50)). Associations of race/ethnicity and housing type with dental insurance were interrelated. Unadjusted results document a deficit in oral health-related indicators among public housing residents, taken as a group, giving a clear picture of an oral health care gap and identifying a defined real-world population that could benefit from services. Existing public housing infrastructure could provide both a venue and a foundation for interventions to reduce oral health disparities on a broad scale.

  9. Oral hygiene habits and oral hygiene index of public school students

    Directory of Open Access Journals (Sweden)

    Adriano Pivotto

    2014-09-01

    Full Text Available Objective: To verify the oral hygiene habits and oral hygiene index of schoolchildren in public elementary school in the city of Itajaí-SC. Methods: Descriptive cross-sectional research. The sample consisted of children enrolled in the first year of elementary level in public schools of Itajaí-SC in 2011. Data collection was performed through registration of the children’s Simplified Oral Hygiene Index (OHI-S and a questionnaire applied to parents/guardians about the characterization of schoolstudent’s oral hygiene. Results: The study evaluated 202 schoolstudent. Regarding daily toothbrushing, 121 (59.9% reported that an adult is responsible for carrying out this procedure for the child and 81 (40.1% reported the own child performs brushing. Brushing frequency for 128 (63.4% children was three times a day and floss was not used by 137 (68% of them. In 114 (56.4% of the schoolchildren was found an OHI-S classified as reasonable hygiene (1.3 to 2. Regarding how to deal with the oral hygiene of children, 140 (69% parents stated having already received such information and the source cited by 118 (58.4% was the dentist. Conclusion: Schoolchildren presented oral hygiene habits with deficiency in dental plaque removal and flossing, resulting in a reasonable OHI-S. doi: http://dx.doi.org/10.5020/18061230.2013.p455

  10. A discourse on creating and rendering educational and cultural enrichment services to rural migrant workers by public libraries

    Institute of Scientific and Technical Information of China (English)

    WANG; Zizhou; Charles; C.Yan

    2009-01-01

    As far as China’s enormous success in her economic reforms and development is concerned,Chinese rural migrant workers indeed have had their biggest share of contributions.Yet ironically in return,they have only received a disproportionate meager share of benefit rewards.These people represent a huge economically deprived group at the bottom of the social totem pole in China’s metropolises.On the whole as a social group,their educational attainment is relatively low as compared to their average urban coworkers.As such being the case,their rights to access some of the cost-free cultural and educational enrichment programs in the society are limited and not always assured.Nevertheless and in general speaking,they manifest a strong and consistent desire to acquire all sorts of new and practical knowledge by means of accessing the resources and facilities of their local public libraries.It is suggested in this paper that public libraries are in a good position to give strong support to the central government’s strategic planning for the development of a public culture service systema).In implementing such a government initiative with an unswerving purpose of advancing social justice and equality,public libraries should strife to provide as many as possible their library services at no cost to the public,especially to those socially deprived rural migrant workers.

  11. Oral Care during Pregnancy: Attitudes of Brazilian Public Health Professionals

    Directory of Open Access Journals (Sweden)

    Saul Martins Paiva

    2012-09-01

    Full Text Available There is little information about health professionals’ behavior regarding oral health care during pregnancy. We evaluated attitudes of obstetricians/gynecologists, nurses, and dentists working at a public community service towards pregnant women’s oral health. Health professionals responded to a self-applied questionnaire. Cluster analysis identified two clusters of respondents; Chi-square, Student’s t test, and logistic regression were used to compare the two clusters in terms of the independent variables. Respondents were categorized into cluster 1 ‘less favorable’ (n = 159 and cluster 2 ‘more favorable’ (n = 124 attitudes. Professionals that had attended a residency or specialization program (OR = 2.08, 95% CI = 1.15–3.77, p = 0.016 and worked exclusively at the public service (OR = 2.15, 95% CI = 1.10–4.20, p = 0.025 presented more favorable attitudes. Obstetricians/gynecologists (OR = 0.22, 95% CI = 0.09–0.54, p = 0.001 and nurses (OR = 0.50, 95% CI = 0.29–0.86, p = 0.013 showed less favorable attitudes than dentists. Health care providers’ attitudes regarding pregnant women’s oral health were related to their occupation, qualification, and dedication to the public service.

  12. Practical Parallel Rendering

    CERN Document Server

    Chalmers, Alan

    2002-01-01

    Meeting the growing demands for speed and quality in rendering computer graphics images requires new techniques. Practical parallel rendering provides one of the most practical solutions. This book addresses the basic issues of rendering within a parallel or distributed computing environment, and considers the strengths and weaknesses of multiprocessor machines and networked render farms for graphics rendering. Case studies of working applications demonstrate, in detail, practical ways of dealing with complex issues involved in parallel processing.

  13. Oral contraceptives and venous thromboembolism: pill scares and public health.

    Science.gov (United States)

    Reid, Robert L

    2011-11-01

    Post-marketing surveillance of combined oral contraceptives (COCs) for rare complications such as venous thromboembolism (VTE) presents unique challenges. Prospective studies, which are costly and time consuming, have to date been undertaken by only a few contraceptive manufacturers willing to commit to full evaluation of product safety. Often such studies are conducted with the approval of regulatory authorities as a precondition for marketing. Alternatively, independent investigators with access to large databases have conducted retrospective studies to compare the incidence of VTE between new and older products. Such studies, however, run the risk of erroneous conclusions if they cannot ensure comparable risk profiles for users of these different products. Often database studies are unable to access information on important confounders, and medical records may not be available to validate the actual diagnosis of VTE. "Pill scares" generated following publication and media dissemination of worrisome findings, when the conclusions are in doubt and not corroborated by stronger prospective study designs, are frequently damaging to public health. From a review of recent publications on the VTE risk with drospirenone-containing COCs, it can be concluded that the best quality evidence does not support a difference in risk between users of COCs containing drospirenone and those of COCs containing levonorgestrel.

  14. Oral health in the agenda of priorities in public health.

    Science.gov (United States)

    Antunes, José Leopoldo Ferreira; Toporcov, Tatiana Natasha; Bastos, João Luiz; Frazão, Paulo; Narvai, Paulo Capel; Peres, Marco Aurélio

    2016-09-01

    This study describes the scientific production on oral health diffused in Revista de Saúde Pública, in the 50 years of its publication. A narrative review study was carried out using PubMed, as it is the search database that indexes all issues of the journal. From 1967 to 2015, 162 manuscripts specifically focused on oral health themes were published. This theme was present in all volumes of the journal, with increasing participation over the years. Dental caries was the most studied theme, constantly present in the journal since its first issue. Periodontal disease, fluorosis, malocclusions, and other themes emerged even before the decline of dental caries indicators. Oral health policy is the most recurring theme in the last two decades. Revista de Saúde Pública has been an important vehicle for dissemination, communication, and reflection on oral health, contributing in a relevant way to the technical-scientific interaction between professionals in this field. RESUMO Este estudo descreve a produção científica sobre saúde bucal veiculada na Revista de Saúde Pública, nos cinquenta anos de sua publicação. Foi realizado estudo de revisão narrativa, utilizando o PubMed como mecanismo de busca que indexa todos os fascículos da revista. De 1967 a 2015, foram publicados 162 manuscritos com foco específico em temas de saúde bucal. Essa temática esteve presente em todos os volumes da revista, com participação crescente ao longo dos anos. Cárie dentária foi o tema mais estudado, marcando presença constante na revista desde seu primeiro fascículo. Doença periodontal, fluorose, oclusopatias e outros temas emergiram antes mesmo do declínio dos indicadores de cárie. Políticas de saúde bucal é o tema mais recorrente nas duas últimas décadas. A Revista de Saúde Pública tem sido importante veículo de divulgação, comunicação e reflexão sobre saúde bucal, contribuindo de modo relevante para a interação técnico-científica entre os

  15. Efficacy of a public promotion program on children's oral health.

    Science.gov (United States)

    Alves, Ana Paula S; Rank, Rise C I C; Vilela, Joana Estela R; Rank, Marcos S; Ogawa, Wataro N; Molina, Omar F

    2017-09-25

    To assess the efficacy of the Baby's Mouth early dental care prevention and promotion program in preventing oral diseases (caries, gingivitis, or malocclusions) in children attended since 2010. This was a cross-sectional and cohort study that assessed 252 children between 36 and 60 months of age in both sexes. The children were divided into three groups: G1: effective participants of the program from birth; G2: children who have stopped participating for more than 24 months, and G3: children who have never attended a prevention program. The evaluation was carried out in two stages: first, an interview with the mothers and, afterwards, a clinical children examination to assess the presence of caries, gingivitis, and malocclusion. The chi-squared test was used for statistical analysis between groups (p<0.05). The diseases assessed were: caries (G1: 5.9%, G2: 54.7%, G3: 70%), gingivitis (G1: 8.3%, G2: 17.9%, G3: 40.5%), and malocclusion (G1: 22.6%; G2: 28.6%; G3: 50%). For gingivitis, there was no significant difference when comparing G1 and G2 (p=0.107), but it was significant between G1 and G3 (p<0.001). Regarding malocclusion, a statistically significant relationship was observed (p=0.004) among all groups. The prevention and promotion program in public oral health was effective in preventing caries disease, gingivitis, and malocclusion in children under 5 years of age. Copyright © 2017 Sociedade Brasileira de Pediatria. Published by Elsevier Editora Ltda. All rights reserved.

  16. 15 CFR 2003.4 - Presentation of oral testimony at public hearings.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Presentation of oral testimony at public hearings. 2003.4 Section 2003.4 Commerce and Foreign Trade Regulations Relating to Foreign Trade... § 2003.4 Presentation of oral testimony at public hearings. (a) A request by an interested party...

  17. Video-based rendering

    CERN Document Server

    Magnor, Marcus A

    2005-01-01

    Driven by consumer-market applications that enjoy steadily increasing economic importance, graphics hardware and rendering algorithms are a central focus of computer graphics research. Video-based rendering is an approach that aims to overcome the current bottleneck in the time-consuming modeling process and has applications in areas such as computer games, special effects, and interactive TV. This book offers an in-depth introduction to video-based rendering, a rapidly developing new interdisciplinary topic employing techniques from computer graphics, computer vision, and telecommunication en

  18. Publication rates of editorial board members in oral health journals.

    Science.gov (United States)

    Rösing, Cassiano Kuchenbecker; Junges, Roger; Haas, Alex Nogueira

    2014-01-01

    The aim of this study was to measure the publication rate of editorial board members in their board journals and to evaluate associated variables. We evaluated the ten highest-ranked journals according to the 5-year impact factor under 'Dentistry, Oral Surgery & Medicine' subject category for 2010, 2011, and 2012. All original research papers with at least one member of the editorial board as author were counted. Final analyses assessed associated variables such as size of the editorial board, number of papers published each year, and each journal's impact factor. Overall, there was an increase in the average number of articles published from 2010 (115.2 ± 52.2) to 2012 (134.7 ± 47.4). The number and percentage of articles published with editorial board members as authors over the three years did not follow the same pattern, with a slight decrease from 2010 to 2011 and an increase in 2012. The number of articles with editorial board members as authors was significantly higher for journals with impact factors ≥4.0. Journals with a higher impact factor and larger editorial board were associated with higher chances of editorial board members publishing in their respective journals. Participation of editorial board members as authors in publishing varies significantly among journals.

  19. Publication rates of editorial board members in oral health journals

    Directory of Open Access Journals (Sweden)

    Cassiano Kuchenbecker RÖSING

    2014-08-01

    Full Text Available The aim of this study was to measure the publication rate of editorial board members in their board journals and to evaluate associated variables. We evaluated the ten highest-ranked journals according to the 5-year impact factor under ‘Dentistry, Oral Surgery & Medicine’ subject category for 2010, 2011, and 2012. All original research papers with at least one member of the editorial board as author were counted. Final analyses assessed associated variables such as size of the editorial board, number of papers published each year, and each journal’s impact factor. Overall, there was an increase in the average number of articles published from 2010 (115.2 ± 52.2 to 2012 (134.7 ± 47.4. The number and percentage of articles published with editorial board members as authors over the three years did not follow the same pattern, with a slight decrease from 2010 to 2011 and an increase in 2012. The number of articles with editorial board members as authors was significantly higher for journals with impact factors ≥4.0. Journals with a higher impact factor and larger editorial board were associated with higher chances of editorial board members publishing in their respective journals. Participation of editorial board members as authors in publishing varies significantly among journals.

  20. 14 CFR Appendix 1 to Part 11 - Oral Communications With the Public During Rulemaking

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Oral Communications With the Public During... the substance of a proposed rule is significantly changed as a result of such an oral communication... TRANSPORTATION PROCEDURAL RULES GENERAL RULEMAKING PROCEDURES Pt. 11, App. 1 Appendix 1 to Part...

  1. 15 CFR 2006.9 - Presentation of oral testimony at public hearings.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Presentation of oral testimony at public hearings. 2006.9 Section 2006.9 Commerce and Foreign Trade Regulations Relating to Foreign Trade... SECTION 301 OF THE TRADE ACT OF 1974, AS AMENDED § 2006.9 Presentation of oral testimony at...

  2. 28 CFR 55.20 - Oral assistance and publicity.

    Science.gov (United States)

    2010-07-01

    ... OF THE VOTING RIGHTS ACT REGARDING LANGUAGE MINORITY GROUPS Minority Language Materials and... should be given in oral form to the extent needed to enable members of the applicable language minority... consider whether a jurisdiction has given sufficient attention to the needs of language minority...

  3. Rendering the Topological Spines

    Energy Technology Data Exchange (ETDEWEB)

    Nieves-Rivera, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-05-05

    Many tools to analyze and represent high dimensional data already exits yet most of them are not flexible, informative and intuitive enough to help the scientists make the corresponding analysis and predictions, understand the structure and complexity of scientific data, get a complete picture of it and explore a greater number of hypotheses. With this in mind, N-Dimensional Data Analysis and Visualization (ND²AV) is being developed to serve as an interactive visual analysis platform with the purpose of coupling together a number of these existing tools that range from statistics, machine learning, and data mining, with new techniques, in particular with new visualization approaches. My task is to create the rendering and implementation of a new concept called topological spines in order to extend ND²AV's scope. Other existing visualization tools create a representation preserving either the topological properties or the structural (geometric) ones because it is challenging to preserve them both simultaneously. Overcoming such challenge by creating a balance in between them, the topological spines are introduced as a new approach that aims to preserve them both. Its render using OpenGL and C++ and is currently being tested to further on be implemented on ND²AV. In this paper I will present what are the Topological Spines and how they are rendered.

  4. Immunological and Biochemical Markers in Oral Carcinogenesis: The Public Health Perspective

    Directory of Open Access Journals (Sweden)

    Sunali Khanna

    2008-12-01

    Full Text Available Oral health is an integral component of general health and well being and a basic human right. Dental public health is probably the most challenging specialty of dentistry. Because of the lack of adequate resources among other factors, many people are likely to suffer from dental diseases. Despite great improvements in the oral health status of populations across the world, the burden and impact of dental diseases are still high. This is particularly true among underprivileged groups in both developed and developing communities. Oral diseases and conditions, including oral cancer, oral manifestations of HIV/AIDS, dental trauma, craniofacial anomalies, and noma, all have broad impacts on health and well-being. Oral cancer, the sixth most common cancer worldwide continues to be most prevalent cancer related to the consumption of tobacco, alcohol and other carcinogenic products. Nevertheless, significant reduction in mortality can be achieved by advances in early diagnosis and implementation of multidisciplinary treatment programs leading to improvement of survivorship and better quality of life. The present study was designed to evaluate the immunologic and biochemical markers in oral carcinogenesis using circulating immune complexes (CIC, copper, iron, and selenium concentrations as assessment endpoints. Study results indicated an increase in CIC and copper levels, and a decrease in iron and selenium concentrations in oral cancer patients compared to controls. The implications of these findings for public health are discussed.

  5. High Fidelity Haptic Rendering

    CERN Document Server

    Otaduy, Miguel A

    2006-01-01

    The human haptic system, among all senses, provides unique and bidirectional communication between humans and their physical environment. Yet, to date, most human-computer interactive systems have focused primarily on the graphical rendering of visual information and, to a lesser extent, on the display of auditory information. Extending the frontier of visual computing, haptic interfaces, or force feedback devices, have the potential to increase the quality of human-computer interaction by accommodating the sense of touch. They provide an attractive augmentation to visual display and enhance t

  6. Organisational culture: pursuing a theoretical foundation within the Finnish public oral health-care context.

    Science.gov (United States)

    Kasila, Kirsti; Poskiparta, Marita

    2004-01-01

    At the moment, Finnish oral health care is undergoing many changes. Little attention has been paid to issues of organisational culture and communication in Finnish oral health care. Yet the question of culture is of primary importance for changes in an organisation and for planning and reconstructing the rational functioning of an organisation. The purpose of this paper is to examine Finnish public oral health care within a theoretical framework of organisational culture and to identify the various cultural traits that appear to characterise Finnish oral health care. Using a cultural point of view, we develop an orientation for understanding more profoundly and specifically the processes concerning the functioning and change of oral health care.

  7. Duplicate publications and related problems in published papers on oral and maxillofacial surgery.

    Science.gov (United States)

    Le, A; Moran, C M P; Bezuhly, M; Hong, P

    2015-07-01

    As duplicate publication is unethical, our aim was to find out how common it is among published papers on oral and maxillofacial surgery. We used PubMed to identify index articles published in 2010 in the Journal of Oral and Maxillofacial Surgery, the British Journal of Oral and Maxillofacial Surgery, and the European Journal of Cranio-Maxillo-Facial Surgery, and searched for possible duplicate publications from 2008 to 2012 using the first or second and last authors' names. Suspected duplicates were categorised into "non-duplicate" (no overlap), "duplicate" (identical results and conclusions), or "salami-sliced" publications (part of the index article repeated or continued). Of the 589 index articles, 17 (3%) had some form of duplication, but specifically, we found 3 duplicate, and 15 salami-sliced publications. Most redundant articles originated from China (n=4), followed by Italy, Japan, and Germany (3 from each) and the United States and Denmark (2 each). Of the 18 redundant publications, 9 did not reference the related index article. Duplicate material is still being published, and salami-slicing is relatively common among publications on oral and maxillofacial surgery. Further research is required into the extent and impact of this finding.

  8. Fearless Public Speaking: Oral Presentation Activities for the Elementary Classroom

    Science.gov (United States)

    Boyce, Janet S.; Alber-Morgan, Sheila R.; Riley, Jeanetta G.

    2007-01-01

    Nausea, sweating, weak knees, and a dry mouth are all symptoms associated with the fear of standing in front of an audience. Considering the anxiety that public speaking produces, students of any age are facing a significant challenge when they speak in front of a group. While speaking is considered to be an integral part of language arts, it…

  9. Fearless Public Speaking: Oral Presentation Activities for the Elementary Classroom

    Science.gov (United States)

    Boyce, Janet S.; Alber-Morgan, Sheila R.; Riley, Jeanetta G.

    2007-01-01

    Nausea, sweating, weak knees, and a dry mouth are all symptoms associated with the fear of standing in front of an audience. Considering the anxiety that public speaking produces, students of any age are facing a significant challenge when they speak in front of a group. While speaking is considered to be an integral part of language arts, it…

  10. Evaluation of community-based oral health promotion and oral disease prevention--WHO recommendations for improved evidence in public health practice

    DEFF Research Database (Denmark)

    Petersen, Poul Erik; Kwan, Stella

    2004-01-01

    of the evaluation of oral health promotion and oral disease prevention programmes. The aims of the workshop were to: (1) identify common problems and challenges in evaluating community-based oral health interventions; (2) explore developments in the evaluation approaches in public health; (3) share experiences....... The first day was devoted to presentations of oral health promotion and oral disease prevention programmes from around the world. During the second day, WHO staff at Headquarters in Geneva discussed aspects of evaluation of public health programmes. Two working groups were formed to discuss agreed topics......, and the reports from their deliberations, together with the general discussion, resulted in the presentation of emerging key issues and recommendations. In summary, it was agreed that evaluation of oral health promotion and disease prevention programmes should integrate, whenever possible, with general health...

  11. ARE: Ada Rendering Engine

    Directory of Open Access Journals (Sweden)

    Stefano Penge

    2009-10-01

    Full Text Available E' ormai pratica diffusa, nello sviluppo di applicazioni web, l'utilizzo di template e di potenti template engine per automatizzare la generazione dei contenuti da presentare all'utente. Tuttavia a volte la potenza di tali engine è€ ottenuta mescolando logica e interfaccia, introducendo linguaggi diversi da quelli di descrizione della pagina, o addirittura inventando nuovi linguaggi dedicati.ARE (ADA Rendering Engine è€ pensato per gestire l'intero flusso di creazione del contenuto HTML/XHTML dinamico, la selezione del corretto template, CSS, JavaScript e la produzione dell'output separando completamente logica e interfaccia. I templates utilizzati sono puro HTML senza parti in altri linguaggi, e possono quindi essere gestiti e visualizzati autonomamente. Il codice HTML generato è€ uniforme e parametrizzato.E' composto da due moduli, CORE (Common Output Rendering Engine e ALE (ADA Layout Engine.Il primo (CORE viene utilizzato per la generazione OO degli elementi del DOM ed è pensato per aiutare lo sviluppatore nella produzione di codice valido rispetto al DTD utilizzato. CORE genera automaticamente gli elementi del DOM in base al DTD impostato nella configurazioneIl secondo (ALE viene utilizzato come template engine per selezionare automaticamente in base ad alcuni parametri (modulo, profilo utente, tipologia del nodo, del corso, preferenze di installazione il template HTML, i CSS e i file JavaScript appropriati. ALE permette di usare templates di default e microtemplates ricorsivi per semplificare il lavoro del grafico.I due moduli possono in ogni caso essere utilizzati indipendentemente l'uno dall'altro. E' possibile generare e renderizzare una pagina HTML utilizzando solo CORE oppure inviare gli oggetti CORE al template engine ALE che provvede a renderizzare la pagina HTML. Viceversa è possibile generare HTML senza utilizzare CORE ed inviarlo al template engine ALECORE è alla prima release ed è€ già utilizzato all

  12. 28 CFR 55.13 - Language used for oral assistance and publicity.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Language used for oral assistance and publicity. 55.13 Section 55.13 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) IMPLEMENTATION OF.... Some languages, for example, Chinese, have several dialects. Where a jurisdiction is obligated...

  13. Equity, social determinants and public health programmes - the case of oral health

    DEFF Research Database (Denmark)

    Petersen, Poul Erik; Kwan, Stella

    2011-01-01

    for health, healthy environments, healthy lifestyles, and the need for orientation of health services towards health promotion and disease prevention. This report advocates that oral health for all can be promoted effectively by applying this philosophy and some major public health actions are outlined....

  14. Oral Academic Discourse Socialisation: Challenges Faced by International Undergraduate Students in a Malaysian Public University

    Science.gov (United States)

    Mahfoodh, Omer Hassan Ali

    2014-01-01

    This paper reports a qualitative study which examines the challenges faced by six international undergraduate students in their socialisation of oral academic discourse in a Malaysian public university. Data were collected employing interviews. Students' presentations were also collected. Semi-structured interviews were transcribed verbatim and…

  15. Parallel hierarchical radiosity rendering

    Energy Technology Data Exchange (ETDEWEB)

    Carter, M.

    1993-07-01

    In this dissertation, the step-by-step development of a scalable parallel hierarchical radiosity renderer is documented. First, a new look is taken at the traditional radiosity equation, and a new form is presented in which the matrix of linear system coefficients is transformed into a symmetric matrix, thereby simplifying the problem and enabling a new solution technique to be applied. Next, the state-of-the-art hierarchical radiosity methods are examined for their suitability to parallel implementation, and scalability. Significant enhancements are also discovered which both improve their theoretical foundations and improve the images they generate. The resultant hierarchical radiosity algorithm is then examined for sources of parallelism, and for an architectural mapping. Several architectural mappings are discussed. A few key algorithmic changes are suggested during the process of making the algorithm parallel. Next, the performance, efficiency, and scalability of the algorithm are analyzed. The dissertation closes with a discussion of several ideas which have the potential to further enhance the hierarchical radiosity method, or provide an entirely new forum for the application of hierarchical methods.

  16. Sea modeling and rendering

    Science.gov (United States)

    Cathala, Thierry; Latger, Jean

    2010-10-01

    More and more defence and civil applications require simulation of marine synthetic environment. Currently, the "Future Anti-Surface-Guided-Weapon" (FASGW) or "anti-navire léger" (ANL) missile needs this kind of modelling. This paper presents a set of technical enhancement of the SE-Workbench that aim at better representing the sea profile and the interaction with targets. The operational scenario variability is a key criterion: the generic geographical area (e.g. Persian Gulf, coast of Somalia,...), the type of situation (e.g. peace keeping, peace enforcement, anti-piracy, drug interdiction,...)., the objectives (political, strategic, or military objectives), the description of the mission(s) (e.g. antipiracy) and operation(s) (e.g. surveillance and reconnaissance, escort, convoying) to achieve the objectives, the type of environment (Weather, Time of day, Geography [coastlines, islands, hills/mountains]). The paper insists on several points such as the dual rendering using either ray tracing [and the GP GPU optimization] or rasterization [and GPU shaders optimization], the modelling of sea-surface based on hypertextures and shaders, the wakes modelling, the buoyancy models for targets, the interaction of coast and littoral, the dielectric infrared modelling of water material.

  17. Evaluation of community-based oral health promotion and oral disease prevention--WHO recommendations for improved evidence in public health practice

    DEFF Research Database (Denmark)

    Petersen, Poul Erik; Kwan, Stella

    2004-01-01

    of the evaluation of oral health promotion and oral disease prevention programmes. The aims of the workshop were to: (1) identify common problems and challenges in evaluating community-based oral health interventions; (2) explore developments in the evaluation approaches in public health; (3) share experiences......, and especially the evaluation, of community oral disease prevention programmes and oral health promotion programmes should be developed and updated regularly. WHO Collaborating Centres could have a role in promoting good practice, training and collaboration between teams throughout the world. Centres undertaking......Systematic evaluation is an integral part of the organisation and delivery of community oral health care programmes, ensuring the effectiveness of these community-based interventions. As for general health promotion programmes the common problems from effectiveness reviews of oral health...

  18. High Oral Communication Apprehensives: How Can Students be Helped to Reduce Their Fear of Public Speaking?

    Directory of Open Access Journals (Sweden)

    Dan Shanahan

    2015-05-01

    Full Text Available The literature has identified oral communication as a skill that employers desire of their workforce. Even though accounting and business education programmes place considerable emphasis on the advancement of communication competencies among students, not all students appear to benefit from communication skills development. This may arise from of a fear of communicating with others, commonly known as oral communication apprehension, a factor which inhibits an individual’s willingness to communicate in one or a number of contexts - one to one conversations, communicating in groups, at meetings and making a presentation in public – and which may inhibit development of effective communication skills. Prior studies have measured oral communication apprehension of students in different disciplines, and there has been some qualitative exploration of the phenomenon. This paper reports on study conducted in the School of Accounting and Finance, DIT. Levels of apprehension were measured for 368 students. The views of a number of students were received and analysed and compared to their oral communication apprehension scores. Some students who indicated that they found presenting extremely difficult were identified, and their views are reported. Their perspectives and fears demonstrate ‘the pain’ that many suffer when called on to present. The study concludes with a recommendation on a possible oral communications approach which could be adopted to help students to overcome fear of presenting in public

  19. Standardized rendering from IR surveillance motion imagery

    Science.gov (United States)

    Prokoski, F. J.

    2014-06-01

    Government agencies, including defense and law enforcement, increasingly make use of video from surveillance systems and camera phones owned by non-government entities.Making advanced and standardized motion imaging technology available to private and commercial users at cost-effective prices would benefit all parties. In particular, incorporating thermal infrared into commercial surveillance systems offers substantial benefits beyond night vision capability. Face rendering is a process to facilitate exploitation of thermal infrared surveillance imagery from the general area of a crime scene, to assist investigations with and without cooperating eyewitnesses. Face rendering automatically generates greyscale representations similar to police artist sketches for faces in surveillance imagery collected from proximate locations and times to a crime under investigation. Near-realtime generation of face renderings can provide law enforcement with an investigation tool to assess witness memory and credibility, and integrate reports from multiple eyewitnesses, Renderings can be quickly disseminated through social media to warn of a person who may pose an immediate threat, and to solicit the public's help in identifying possible suspects and witnesses. Renderings are pose-standardized so as to not divulge the presence and location of eyewitnesses and surveillance cameras. Incorporation of thermal infrared imaging into commercial surveillance systems will significantly improve system performance, and reduce manual review times, at an incremental cost that will continue to decrease. Benefits to criminal justice would include improved reliability of eyewitness testimony and improved accuracy of distinguishing among minority groups in eyewitness and surveillance identifications.

  20. Knowledge, Attitude and Practices on Oral Health of Public School Children of Batangas City

    Directory of Open Access Journals (Sweden)

    JENNIFER U. DOTADO-MADERAZO

    2014-08-01

    Full Text Available Dental caries among Filipino children ranked second worst among 21 World Health Organization Western Pacific countries. A recent National Oral Health Survey showed that 97 percent of Grade 1 students and 82 percent of Grade 2 students surveyed suffered from tooth decay. WHO (2007 urges governments to “ promote oral health in schools, aiming at developing healthy lifestyles and self care practices in children”. The study assessed the dental health education of public school children in Batangas City to determine the knowledge, attitude and practices of the respondents on oral health; to determine the significant relationship between the profile of the respondents and their assessment on the dental health education and propose a program to improve the project. This study used a descriptive type of research and distributed a standardized questionnaire to 279 public school children of Ilijan, Sta. Rita Kalsada and Julian Pastor Memorial Elementary School. The participants were selected randomly. The findings of the study showed that there is an observed significant to highly significant relationship between the school and the assessment on oral health in terms of knowledge, attitude and practices. This means that their assessment is affected by the school where they belong.

  1. Periodontal health through public health - the case for oral health promotion

    DEFF Research Database (Denmark)

    Watt, Richard G; Petersen, Poul E

    2012-01-01

    world clinical care and chairside prevention are both unaffordable and inappropriate for the control of periodontal diseases. A paradigm shift away from the individualized treatment approach to a population public health model is needed to promote periodontal health and, in particular to address social......Periodontal diseases are highly prevalent, particularly amongst socially disadvantaged populations, impact on quality of life and are costly to treat. Clinical treatments and chairside preventive approaches alone will never adequately address this problem. Indeed in many parts of the developing...... health policies acting at local, regional, national and international levels need to be implemented to achieve sustainable improvements in oral health. To be effective these policies need to link across the broader public health agenda and require public engagement and support. Clinicians, public health...

  2. Entropy, color, and color rendering.

    Science.gov (United States)

    Price, Luke L A

    2012-12-01

    The Shannon entropy [Bell Syst. Tech J.27, 379 (1948)] of spectral distributions is applied to the problem of color rendering. With this novel approach, calculations for visual white entropy, spectral entropy, and color rendering are proposed, indices that are unreliant on the subjectivity inherent in reference spectra and color samples. The indices are tested against real lamp spectra, showing a simple and robust system for color rendering assessment. The discussion considers potential roles for white entropy in several areas of color theory and psychophysics and nonextensive entropy generalizations of the entropy indices in mathematical color spaces.

  3. Analysis of a unique global public-private partnership to promote oral health.

    Science.gov (United States)

    Pine, Cynthia M; Dugdill, Lindsey

    2011-08-01

    Partnerships for health promotion are between two or more partners to work co-operatively towards a set of shared health outcomes; few public-private partnerships in oral health promotion have been established. To undertake a detailed analysis of a unique global public-private partnership to promote oral health between a global company, Unilever and the Féderation Dentaire International (FDI), a membership organisation representing more than one million dentists worldwide. Qualitative and quantitative, including: collating and analysing a wide range of partnership documents (n =164); reviewing film and pictorial records; undertaking structured interviews (n=34) with people who had a critical role in establishing and delivering the aims of the partnership, and external experts; and site visits to selected global projects active at the time of the evaluation. Over 1 million people have been reached directly through their engagement with 39 projects in 36 countries; an oral health message about the benefits of twice daily tooth brushing has appeared with the authority of the FDI logo on billions of packs of Unilever Oral Care's toothpastes worldwide; many individual members of National Dental Associations have participated in health promotion activities within their communities for the first time; some organisational challenges during the development and delivery of the partnership were recognised by both partners. The first phase of this unique global partnership has been successful in making major progress towards achieving its goals; lessons learned have ensured that the next phase of the partnership has significant potential to contribute to improving oral health globally. © 2011 FDI World Dental Federation.

  4. Competencies Needed in Oral Communication in English among Thai Undergraduate Public Relations Students: A Substantial Gap between Expectations and Reality

    Science.gov (United States)

    Pattanapichet, Fasawang; Chinokul, Sumalee

    2011-01-01

    This article investigates the competencies needed for oral communication in English among Thai undergraduate public relations students for handling public relations job interviews and performing entry-level public relations work. To identify these competencies, the study identified and involved all of the stakeholders in the data reliability…

  5. Competencies Needed in Oral Communication in English among Thai Undergraduate Public Relations Students: A Substantial Gap between Expectations and Reality

    Science.gov (United States)

    Pattanapichet, Fasawang; Chinokul, Sumalee

    2011-01-01

    This article investigates the competencies needed for oral communication in English among Thai undergraduate public relations students for handling public relations job interviews and performing entry-level public relations work. To identify these competencies, the study identified and involved all of the stakeholders in the data reliability…

  6. Strategic communications in oral health: influencing public and professional opinions and actions.

    Science.gov (United States)

    Edmunds, Margo; Fulwood, Charles

    2002-01-01

    In the spring of 2000, US Surgeon General Dr. David Satcher convened a meeting of national experts to recommend strategies to promote equity in children's oral health status and access to dental care. The meeting was planned by a diverse group of health professionals, researchers, educators, and national organizations and by several federal agencies, including the Centers for Disease Control and Prevention, the Center on Medicare and Medicaid Services, the Health Resources and Services Administration, and the National Institute of Dental and Craniofacial Research, National Institutes of Health. This paper was commissioned by the meeting planners to introduce basic principles of social marketing and strategic communications. Many participants were academic researchers, practicing pediatric dentists and pediatricians, dental educators, policy analysts, and industry representatives, and most had no previous experience with public education or communications campaigns. Other participants were communications professionals, journalists, and community organizers without previous experience in oral health care or financing issues. Thus, the paper also served to introduce and illustrate basic ideas about oral health and general health, racial and ethnic disparities in health, and access to care. Through their interactions, the participants developed a series of recommendations to increase public awareness, build public support, improve media coverage, improve care coordination, expand the workforce, and focus the attention of national, state, and local policymakers on legislative and financing initiatives to expand access to dental care. Future coalitions of health professionals working with the policy, research, advocacy, and business communities may find this paper useful in implementing the action steps identified by the Surgeon General's report, "Oral Health in America."

  7. Accessibility to Specialized Public Oral Health Services from the Perspective of Brazilian Users

    Science.gov (United States)

    de Castro, Ricardo Dias; Rangel, Marianne de Lucena; da Silva, Marcos André Azevedo; de Lucena, Brunna Thaís Lucwu; Cavalcanti, Alessandro Leite; Bonan, Paulo Rogério Ferreti; Oliveira, Julyana de Araújo

    2016-01-01

    The Specialized Dental Clinics (SDCs) represent the first government initiative in Latin America aimed at providing specialized oral health services. This study sought to evaluate the organizational accessibility to specialized oral health care services in Brazil and to understand the factors that may be associated with accessibility from the user’s perspective. This epidemiological, cross-sectional and quantitative study was conducted by means of interviews with individuals who sought specialized public oral health services in the city of João Pessoa, Paraíba, Brazil, and consisted of a sample of 590 individuals. Users expressed a favorable view of the classification and resolutive nature of specialized services offered by Brazilian public health. The binary logistic regression analysis revealed weak points highlighting the difficulty involved in obtaining such treatments leading to unfavorable evaluations. In the resolutive nature item, difficulty in accessing the location, queues and lack of materials and equipment were highlighted as statistically significant unfavorable aspects. While many of the users considered the service to be resolutive, weaknesses were mentioned that need to be detected to promote improvements and to prevent other health models adopted worldwide from reproducing the same flaws. PMID:27775584

  8. Accessibility to Specialized Public Oral Health Services from the Perspective of Brazilian Users.

    Science.gov (United States)

    de Castro, Ricardo Dias; Rangel, Marianne de Lucena; da Silva, Marcos André Azevedo; de Lucena, Brunna Thaís Lucwu; Cavalcanti, Alessandro Leite; Bonan, Paulo Rogério Ferreti; Oliveira, Julyana de Araújo

    2016-10-19

    The Specialized Dental Clinics (SDCs) represent the first government initiative in Latin America aimed at providing specialized oral health services. This study sought to evaluate the organizational accessibility to specialized oral health care services in Brazil and to understand the factors that may be associated with accessibility from the user's perspective. This epidemiological, cross-sectional and quantitative study was conducted by means of interviews with individuals who sought specialized public oral health services in the city of João Pessoa, Paraíba, Brazil, and consisted of a sample of 590 individuals. Users expressed a favorable view of the classification and resolutive nature of specialized services offered by Brazilian public health. The binary logistic regression analysis revealed weak points highlighting the difficulty involved in obtaining such treatments leading to unfavorable evaluations. In the resolutive nature item, difficulty in accessing the location, queues and lack of materials and equipment were highlighted as statistically significant unfavorable aspects. While many of the users considered the service to be resolutive, weaknesses were mentioned that need to be detected to promote improvements and to prevent other health models adopted worldwide from reproducing the same flaws.

  9. Exposure render: an interactive photo-realistic volume rendering framework.

    Directory of Open Access Journals (Sweden)

    Thomas Kroes

    Full Text Available The field of volume visualization has undergone rapid development during the past years, both due to advances in suitable computing hardware and due to the increasing availability of large volume datasets. Recent work has focused on increasing the visual realism in Direct Volume Rendering (DVR by integrating a number of visually plausible but often effect-specific rendering techniques, for instance modeling of light occlusion and depth of field. Besides yielding more attractive renderings, especially the more realistic lighting has a positive effect on perceptual tasks. Although these new rendering techniques yield impressive results, they exhibit limitations in terms of their exibility and their performance. Monte Carlo ray tracing (MCRT, coupled with physically based light transport, is the de-facto standard for synthesizing highly realistic images in the graphics domain, although usually not from volumetric data. Due to the stochastic sampling of MCRT algorithms, numerous effects can be achieved in a relatively straight-forward fashion. For this reason, we have developed a practical framework that applies MCRT techniques also to direct volume rendering (DVR. With this work, we demonstrate that a host of realistic effects, including physically based lighting, can be simulated in a generic and flexible fashion, leading to interactive DVR with improved realism. In the hope that this improved approach to DVR will see more use in practice, we have made available our framework under a permissive open source license.

  10. Assessment of stress associated with an oral public speech in veterinary students by salivary biomarkers.

    Science.gov (United States)

    Tecles, Fernando; Fuentes-Rubio, María; Tvarijonaviciute, Asta; Martínez-Subiela, Silvia; Fatjó, Jaume; Cerón, José J

    2014-01-01

    In this report, salivary cortisol, alpha-amylase activity, and testosterone were measured to assess stress associated with a public oral presentation in Veterinary Clinical Pathology students. Stimulated saliva samples were collected before and directly after a 5-minute oral presentation and at 20 and 35 minutes after the beginning of the presentation. Cortisol peaked 20 minutes after the beginning of the presentation, whereas salivary alpha-amylase (sAA) peaked at 5 minutes, just at the end of the speech. These changes were not related to the level of stress that was indicated by the student in a questionnaire, the student's sex, or the quality of the presentation. No changes were detected in testosterone levels during the study. Saliva biomarkers evaluated in this research could be extended to other stress-producing situations in the university life of veterinary students.

  11. Evaluation of community-based oral health promotion and oral disease prevention--WHO recommendations for improved evidence in public health practice.

    Science.gov (United States)

    Petersen, Poul Erik; Kwan, Stella

    2004-12-01

    Systematic evaluation is an integral part of the organisation and delivery of community oral health care programmes, ensuring the effectiveness of these community-based interventions. As for general health promotion programmes the common problems from effectiveness reviews of oral health interventions relate to the quality and validity of programme evaluations. Problems identified mostly refer to the quality of outcome measures, short-term timescales to assess change, inadequate evaluation methodologies and inappropriate evaluation of programme implementation and processes. It remains a challenge to oral health professionals to integrate community oral health programmes into a wider health agenda. Public health research focusing on the development of evaluation methodologies has identified a variety of issues including the importance of using pluralistic evaluation approaches (quantitative and/or qualitative), limitations of the randomised controlled trial (RCT) design for evaluation of public health interventions, the need to match evaluation methods with the nature of intervention, development of outcome measures appropriate for the nature of intervention, importance of developing workforce capacity in evaluation techniques, and the need for development of partnerships between health practitioners and academics in conducting evaluations. In June 2003, the WHO Oral Health Programme at Headquarters organised a two-day workshop to take forward the development and documentation of the evaluation of oral health promotion and oral disease prevention programmes. The aims of the workshop were to: (1) identify common problems and challenges in evaluating community-based oral health interventions; (2) explore developments in the evaluation approaches in public health; (3) share experiences in evaluating oral health intervention programmes implemented at national or community levels in developing and developed countries and (4) develop guidelines for quality evaluation of

  12. RenderMan design principles

    Science.gov (United States)

    Apodaca, Tony; Porter, Tom

    1989-01-01

    The two worlds of interactive graphics and realistic graphics have remained separate. Fast graphics hardware runs simple algorithms and generates simple looking images. Photorealistic image synthesis software runs slowly on large expensive computers. The time has come for these two branches of computer graphics to merge. The speed and expense of graphics hardware is no longer the barrier to the wide acceptance of photorealism. There is every reason to believe that high quality image synthesis will become a standard capability of every graphics machine, from superworkstation to personal computer. The significant barrier has been the lack of a common language, an agreed-upon set of terms and conditions, for 3-D modeling systems to talk to 3-D rendering systems for computing an accurate rendition of that scene. Pixar has introduced RenderMan to serve as that common language. RenderMan, specifically the extensibility it offers in shading calculations, is discussed.

  13. Exposure Render: An Interactive Photo-Realistic Volume Rendering Framework

    NARCIS (Netherlands)

    Kroes, T.; Post, F.H.; Botha, C.P.

    2012-01-01

    The field of volume visualization has undergone rapid development during the past years, both due to advances in suitable computing hardware and due to the increasing availability of large volume datasets. Recent work has focused on increasing the visual realism in Direct Volume Rendering (DVR) by i

  14. Ramifications of Dental Policy and its Impact on Public Oral Health

    Directory of Open Access Journals (Sweden)

    Prasant MC

    2012-01-01

    Full Text Available The oral health care system is to promote, maintain and prevent oral disease. It also aims at adequate treatment to arrest the disease at an early stage .There is a lack of clearly stated objectives and many a time lack of implementation. There are around 300 plus colleges(2in India today. Opening up of private sector to dental college has both a positive and negative impact. Today dental treatment is available in many rural parts of India and there is an increased awareness as compared to before. Technology and infrastructure is widely available. The question is are the department and infrastructure used .Definitely not to the optimumas the are not performing for what they are designed. For example Community dentistry department has been used only to increase number of patients to dental colleges. It is seen as an advertisement agency for these colleges. Role of Community dentist has become that of is of a referring body. Other subjects relating to dental public health like fluoridation of drinking water, Commercial mouthwashes have also been a cause for concern, with some studies linking them to an increased risk of oral cancer(3, 4, 5, 6 has taken a back seat. The maximum permissible limit of fluoride in drinking water in India is 1.2 mg/L7. There are programs on tobacco awareness but its use in India does not show significant decline in users. Most of these programs are not involving dentist actively

  15. The Teaching of Listening as an Integral Part of an Oral Activity: An Examination of Public-Speaking Texts

    Science.gov (United States)

    Adams, W. Clifton; Cox, E. Sam

    2010-01-01

    This article presents the results of a content analysis of 10 current public-speaking textbooks to determine the nature and extent to which they teach listening in an integrated approach with public speaking as an oral activity. Lewis and Nichols (1965) predicted that listening would increasingly be taught especially in an integrated approach with…

  16. Realistic Real-Time Outdoor Rendering in Augmented Reality

    Science.gov (United States)

    Kolivand, Hoshang; Sunar, Mohd Shahrizal

    2014-01-01

    Realistic rendering techniques of outdoor Augmented Reality (AR) has been an attractive topic since the last two decades considering the sizeable amount of publications in computer graphics. Realistic virtual objects in outdoor rendering AR systems require sophisticated effects such as: shadows, daylight and interactions between sky colours and virtual as well as real objects. A few realistic rendering techniques have been designed to overcome this obstacle, most of which are related to non real-time rendering. However, the problem still remains, especially in outdoor rendering. This paper proposed a much newer, unique technique to achieve realistic real-time outdoor rendering, while taking into account the interaction between sky colours and objects in AR systems with respect to shadows in any specific location, date and time. This approach involves three main phases, which cover different outdoor AR rendering requirements. Firstly, sky colour was generated with respect to the position of the sun. Second step involves the shadow generation algorithm, Z-Partitioning: Gaussian and Fog Shadow Maps (Z-GaF Shadow Maps). Lastly, a technique to integrate sky colours and shadows through its effects on virtual objects in the AR system, is introduced. The experimental results reveal that the proposed technique has significantly improved the realism of real-time outdoor AR rendering, thus solving the problem of realistic AR systems. PMID:25268480

  17. Realistic real-time outdoor rendering in augmented reality.

    Science.gov (United States)

    Kolivand, Hoshang; Sunar, Mohd Shahrizal

    2014-01-01

    Realistic rendering techniques of outdoor Augmented Reality (AR) has been an attractive topic since the last two decades considering the sizeable amount of publications in computer graphics. Realistic virtual objects in outdoor rendering AR systems require sophisticated effects such as: shadows, daylight and interactions between sky colours and virtual as well as real objects. A few realistic rendering techniques have been designed to overcome this obstacle, most of which are related to non real-time rendering. However, the problem still remains, especially in outdoor rendering. This paper proposed a much newer, unique technique to achieve realistic real-time outdoor rendering, while taking into account the interaction between sky colours and objects in AR systems with respect to shadows in any specific location, date and time. This approach involves three main phases, which cover different outdoor AR rendering requirements. Firstly, sky colour was generated with respect to the position of the sun. Second step involves the shadow generation algorithm, Z-Partitioning: Gaussian and Fog Shadow Maps (Z-GaF Shadow Maps). Lastly, a technique to integrate sky colours and shadows through its effects on virtual objects in the AR system, is introduced. The experimental results reveal that the proposed technique has significantly improved the realism of real-time outdoor AR rendering, thus solving the problem of realistic AR systems.

  18. Realistic real-time outdoor rendering in augmented reality.

    Directory of Open Access Journals (Sweden)

    Hoshang Kolivand

    Full Text Available Realistic rendering techniques of outdoor Augmented Reality (AR has been an attractive topic since the last two decades considering the sizeable amount of publications in computer graphics. Realistic virtual objects in outdoor rendering AR systems require sophisticated effects such as: shadows, daylight and interactions between sky colours and virtual as well as real objects. A few realistic rendering techniques have been designed to overcome this obstacle, most of which are related to non real-time rendering. However, the problem still remains, especially in outdoor rendering. This paper proposed a much newer, unique technique to achieve realistic real-time outdoor rendering, while taking into account the interaction between sky colours and objects in AR systems with respect to shadows in any specific location, date and time. This approach involves three main phases, which cover different outdoor AR rendering requirements. Firstly, sky colour was generated with respect to the position of the sun. Second step involves the shadow generation algorithm, Z-Partitioning: Gaussian and Fog Shadow Maps (Z-GaF Shadow Maps. Lastly, a technique to integrate sky colours and shadows through its effects on virtual objects in the AR system, is introduced. The experimental results reveal that the proposed technique has significantly improved the realism of real-time outdoor AR rendering, thus solving the problem of realistic AR systems.

  19. [Information quality in general public French-speaking websites dedicated to oral cancer detection].

    Science.gov (United States)

    Vivien, A; Kowalski, V; Chatellier, A; Babin, E; Bénateau, H; Veyssière, A

    2017-02-01

    The goal set by the French highest national authorities in the 2014-2019 Cancer Plan is to "heal more sick persons by promoting early diagnosis through screening". Screening requires information. Nowadays, Internet allows for access to information "in one click". The aim of our study was to evaluate the quality of information found on the Internet. Several sites dedicated to oral cavity cancer screening were selected on Google. The quality of health information found in these sites was evaluated by the DISCERN questionnaire. The quality of decision support provided by the sites was evaluated by the IPDAS checklist. Twenty-seven sites were selected. The average DISCERN score was 25.1/75 (15/75 to 40/75). Eighteen sites (66.6%) had very poor, 8 sites (29.6%) had poor and 1 site had average information quality. IPDAS scores ranged from 11.1 to 38.1. Eight sites (29.6%) had less than 20%, 14 sites (51.9%) had between 20 and 30% and 5 sites (18.5%) had 30% or more validated criteria. No site achieved the pass mark. The quality of general public French-speaking website dedicated to oral cancer detection is very bad. The role of health professionals such as general practitioners and head and neck surgeons, remains essential. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  20. Global oral health of older people--call for public health action

    DEFF Research Database (Denmark)

    Petersen, P E; Kandelman, D; Arpin, S

    2010-01-01

    The aim of this report is (1) to provide a global overview of oral health conditions in older people, use of oral health services, and self care practices; (2) to explore what types of oral health services are available to older people, and (3) to identify some major barriers to and opportunities...... for the establishment of oral health services and health promotion programmes....

  1. GPU Pro advanced rendering techniques

    CERN Document Server

    Engel, Wolfgang

    2010-01-01

    This book covers essential tools and techniques for programming the graphics processing unit. Brought to you by Wolfgang Engel and the same team of editors who made the ShaderX series a success, this volume covers advanced rendering techniques, engine design, GPGPU techniques, related mathematical techniques, and game postmortems. A special emphasis is placed on handheld programming to account for the increased importance of graphics on mobile devices, especially the iPhone and iPod touch.Example programs and source code can be downloaded from the book's CRC Press web page. 

  2. Evaluation of oral health in patients with mental disorders attended at the clinic of oral diagnosis of a public university

    Directory of Open Access Journals (Sweden)

    Marina Sena Lopes Da Silva Sacchetto

    Full Text Available INTRODUCTION: Many people suffering from mental disorders fail to adequately perform self-care, especially in relation to personal hygiene and in particular to oral hygiene. For these individuals, the prevention and ongoing clinical monitoring are essential. OBJECTIVE: To investigate the oral diseases that most affect patients with mental disorders attended in the Dental College of the Federal University of Piauí (UFPI. METHODOLOGY: Patients treated during the 2nd half of 2011 and 1st half of 2012 were examined. The DMFT index was used for evaluation of dental caries and the CPI index for periodontal evaluation. The statistical analyzes were performed with SPSS (Statistical Package for the Social Sciences, version 18.0, using a descriptive statistics to determine averages, standard deviations and frequencies. RESULT: 67.50% of the 40 patients had contact with the surgeon dentist for over one year, 95% performed their own oral hygiene and 70% did not use dental floss. The average of DMFT was 14.18. Of the patients, 49.13% needed of restorations of one surface and 60% needed dental prosthesis. Moreover, 33.75% of sextants evaluated had periodontal pockets. CONCLUSION: It can be noticed that patients with mental illness have a high risk of developing oral disorders, however, few carriers visite a dental professional regularly. In addition, the delay to seek treatment and lack of staff training, lead to solutions often crippling.

  3. Comparison of oral hygiene status among 6-14 year old students of public and private schools of Rajbiraj, Saptari, Nepal

    Directory of Open Access Journals (Sweden)

    TK Bhagat

    2015-06-01

    Full Text Available Aim To determine the oral hygiene status of 6-14 years old school children in Rajbiraj, Nepal. Materials and Methods Three hundred school children from public and private schools were examined for oral hygiene status using OHI(S. Descriptive statistics and independent sample t-tests were done. Results There was no significant difference in the oral hygiene status among gender, but the oral hygiene status of the children in private schools was better than that of the public school. Conclusion Large number of public school children had poor oral hygiene compared to private school children. Hence, oral health education programs should be conducted on a frequent basis to improve their oral hygiene status. DOI: http://dx.doi.org/10.3126/jcmsn.v10i1.12763 Journal of College of Medical Sciences-Nepal, 2014, Vol.10(1; 17-21

  4. Primary oral health care: a missing link in public health in Pakistan.

    Science.gov (United States)

    Basharat, S; Shaikh, B T

    2016-12-12

    In Pakistan, the limited availability of oral health care and the high level of unmet oral health care needs are well documented. The recorded prevalence of dental caries is 50-70% and that of oral cancer is among the highest in the world. Although oral health care has been declared to be part of the primary health care system, oral health disparities between rich and poor, and emerging problems of access to and use of appropriate care have never been addressed, reflecting a lack of awareness among both patients and health system decisionmakers. Oral cancer screening and atraumatic restorative treatment for tooth decay could be included in a basic package of oral care that does not require qualified dental surgeons. This article develops an argument, based on literature review and an analysis of the health system in Pakistan, for how a basic oral health programme could be an accessible, affordable and acceptable component of the primary health care system.

  5. Real-time graphics rendering engine

    CERN Document Server

    Bao, Hujun

    2011-01-01

    ""Real-Time Graphics Rendering Engine"" reveals the software architecture of the modern real-time 3D graphics rendering engine and the relevant technologies based on the authors' experience developing this high-performance, real-time system. The relevant knowledge about real-time graphics rendering such as the rendering pipeline, the visual appearance and shading and lighting models are also introduced. This book is intended to offer well-founded guidance for researchers and developers who are interested in building their own rendering engines. Hujun Bao is a professor at the State Key Lab of

  6. Hardware Accelerated Point Rendering of Isosurfaces

    DEFF Research Database (Denmark)

    Bærentzen, Jakob Andreas; Christensen, Niels Jørgen

    2003-01-01

    an approximate technique for point scaling using distance attenuation which makes it possible to render points stored in display lists or vertex arrays. This enables us to render points quickly using OpenGL. Our comparisons show that point generation is significantly faster than triangle generation...... and that the advantage of rendering points as opposed to triangles increases with the size and complexity of the volumes. To gauge the visual quality of future hardware accelerated point rendering schemes, we have implemented a software based point rendering method and compare the quality to both MC and our OpenGL based...

  7. Cluster parallel rendering based on encoded mesh

    Institute of Scientific and Technical Information of China (English)

    QIN Ai-hong; XIONG Hua; PENG Hao-yu; LIU Zhen; SHI Jiao-ying

    2006-01-01

    Use of compressed mesh in parallel rendering architecture is still an unexplored area, the main challenge of which is to partition and sort the encoded mesh in compression-domain. This paper presents a mesh compression scheme PRMC (Parallel Rendering based Mesh Compression) supplying encoded meshes that can be partitioned and sorted in parallel rendering system even in encoded-domain. First, we segment the mesh into submeshes and clip the submeshes' boundary into Runs, and then piecewise compress the submeshes and Runs respectively. With the help of several auxiliary index tables, compressed submeshes and Runs can serve as rendering primitives in parallel rendering system. Based on PRMC, we design and implement a parallel rendering architecture. Compared with uncompressed representation, experimental results showed that PRMC meshes applied in cluster parallel rendering system can dramatically reduce the communication requirement.

  8. Oral Thrush

    Science.gov (United States)

    ... feeding mothers In addition to the distinctive white mouth lesions, infants may have trouble feeding or be fussy ... candidiasis (yeast infection) patient information. American Academy of Oral & Maxillofacial Pathology. http://www.aaomp.org/public/oral-candidiasis.php. ...

  9. Knowledge of Future Dental Practitioners towards Oral Cancer: Exploratory Findings from a Public University in Malaysia.

    Science.gov (United States)

    Bhagavathula, Akshaya Srikanth; Bin Zakaria, Nazrin; Jamshed, Shazia Qasim

    2015-01-01

    Objective. To assess knowledge and awareness of oral cancer in the early identification of risk factors among undergraduate dental students. Methods. A total of 162 undergraduate (third, fourth, and fifth year) dental students at International Islamic University, Malaysia, were approached to participate in the study, and those who agreed were administered. A 9-item pretested questionnaire contains questions on oral examination, oral cancer risk factors, and requests for further information. Descriptive statistics were conducted using chi-square testing. Results. The response rate of the study was 70.3% (114/162), with 26 (22.8%) males and 88 (77.2%) females. All undergraduate dental students were familiar with examining the oral mucosa of their patients and most were likely to advise patients about the risk factors for developing oral cancer (98.2%). Nearly one-third (32.4%) of students reported examining patients with oral lesions as early signs for oral cancer (P < 0.001) and nearly 70% agreed that they did not have sufficient knowledge regarding the prevention and detection of oral cancer (P < 0.001). In addition, more than 95.6% agreed that there is a need for additional information/teaching regarding oral cancer. Further, 61.3% and 14.1% identified tobacco smoking and drinking alcohol as major risk factors for developing oral cancer. Conclusion. This study demonstrated lack of awareness about risk factors among undergraduate dental students regarding oral cancer. Reinforcing awareness and enhancing the benefits of early detection on prevention of oral cancer should be done through training and/or educational intervention.

  10. Binaural Rendering in MPEG Surround

    Directory of Open Access Journals (Sweden)

    Kristofer Kjörling

    2008-04-01

    Full Text Available This paper describes novel methods for evoking a multichannel audio experience over stereo headphones. In contrast to the conventional convolution-based approach where, for example, five input channels are filtered using ten head-related transfer functions, the current approach is based on a parametric representation of the multichannel signal, along with either a parametric representation of the head-related transfer functions or a reduced set of head-related transfer functions. An audio scene with multiple virtual sound sources is represented by a mono or a stereo downmix signal of all sound source signals, accompanied by certain statistical (spatial properties. These statistical properties of the sound sources are either combined with statistical properties of head-related transfer functions to estimate “binaural parameters” that represent the perceptually relevant aspects of the auditory scene or used to create a limited set of combined head-related transfer functions that can be applied directly on the downmix signal. Subsequently, a binaural rendering stage reinstates the statistical properties of the sound sources by applying the estimated binaural parameters or the reduced set of combined head-related transfer functions directly on the downmix. If combined with parametric multichannel audio coders such as MPEG Surround, the proposed methods are advantageous over conventional methods in terms of perceived quality and computational complexity.

  11. Binaural Rendering in MPEG Surround

    Science.gov (United States)

    Breebaart, Jeroen; Villemoes, Lars; Kjörling, Kristofer

    2008-12-01

    This paper describes novel methods for evoking a multichannel audio experience over stereo headphones. In contrast to the conventional convolution-based approach where, for example, five input channels are filtered using ten head-related transfer functions, the current approach is based on a parametric representation of the multichannel signal, along with either a parametric representation of the head-related transfer functions or a reduced set of head-related transfer functions. An audio scene with multiple virtual sound sources is represented by a mono or a stereo downmix signal of all sound source signals, accompanied by certain statistical (spatial) properties. These statistical properties of the sound sources are either combined with statistical properties of head-related transfer functions to estimate "binaural parameters" that represent the perceptually relevant aspects of the auditory scene or used to create a limited set of combined head-related transfer functions that can be applied directly on the downmix signal. Subsequently, a binaural rendering stage reinstates the statistical properties of the sound sources by applying the estimated binaural parameters or the reduced set of combined head-related transfer functions directly on the downmix. If combined with parametric multichannel audio coders such as MPEG Surround, the proposed methods are advantageous over conventional methods in terms of perceived quality and computational complexity.

  12. Rendering Caustics on Non-Lambertian Surfaces

    DEFF Research Database (Denmark)

    Jensen, Henrik Wann

    1997-01-01

    This paper presents a new technique for rendering caustics on non-Lambertian surfaces. The method is based on an extension of the photon map which removes previous restrictions limiting the usage to Lambertian surfaces. We add information about the incoming direction to the photons and this allow...... reduces the rendering time. We have used the method to render caustics on surfaces with reflectance functions varying from Lambertian to glossy specular....

  13. Building Interstellar's black hole: the gravitational renderer

    OpenAIRE

    James, Oliver; Dieckmann, Sylvan; Pabst, Simon; Roberts, Paul-George H.; Thorne, Kip S.

    2015-01-01

    Interstellar is the first feature film to attempt depicting a black hole as it would actually be seen by somebody nearby. A close collaboration between the production's Scientific Advisor and the Visual Effects team led to the development of a new renderer, DNGR (Double Negative Gravitational Renderer) which uses novel techniques for rendering in curved space-time. Following the completion of the movie, the code was adapted for scientific research, leading to new insights into gravitational l...

  14. Image Based Rendering under Varying Illumination

    Institute of Scientific and Technical Information of China (English)

    Wang Chengfeng (王城峰); Hu Zhanyi

    2003-01-01

    A new approach for photorealistic rendering of a class of objects at arbitrary illumination is presented. The approach of the authors relies entirely on image based rendering techniques. A scheme is utilized for re-illumination of objects based on linear combination of low dimensional image representations. The minimum rendering condition of technique of the authors is three sample images under varying illumination of a reference object and a single input image of an interested object. Important properties of this approach are its simplicity, robustness and speediness. Experimental results validate the proposed rendering approach.

  15. RenderToolbox3: MATLAB tools that facilitate physically based stimulus rendering for vision research.

    Science.gov (United States)

    Heasly, Benjamin S; Cottaris, Nicolas P; Lichtman, Daniel P; Xiao, Bei; Brainard, David H

    2014-02-07

    RenderToolbox3 provides MATLAB utilities and prescribes a workflow that should be useful to researchers who want to employ graphics in the study of vision and perhaps in other endeavors as well. In particular, RenderToolbox3 facilitates rendering scene families in which various scene attributes and renderer behaviors are manipulated parametrically, enables spectral specification of object reflectance and illuminant spectra, enables the use of physically based material specifications, helps validate renderer output, and converts renderer output to physical units of radiance. This paper describes the design and functionality of the toolbox and discusses several examples that demonstrate its use. We have designed RenderToolbox3 to be portable across computer hardware and operating systems and to be free and open source (except for MATLAB itself). RenderToolbox3 is available at https://github.com/DavidBrainard/RenderToolbox3.

  16. Oral Communication Apprehension: an Exploration in Addressing Fear of Public Speaking

    OpenAIRE

    Shanahan, Dan

    2012-01-01

    Several research studies have identified oral communication as a skill employers desire of their workforce, and so, accounting and business education programmes place considerable emphasis on the development of communication competencies among students. However, not all students appear to benefit as desired from communication skills development. Prior research indicates this may arise from a fear of communicating, commonly known as oral communication apprehension, a factor which inhibits his/...

  17. Image Based Rendering and Virtual Reality

    DEFF Research Database (Denmark)

    Livatino, Salvatore

    The Presentation concerns with an overview of Image Based Rendering approaches and their use on Virtual Reality, including Virtual Photography and Cinematography, and Mobile Robot Navigation.......The Presentation concerns with an overview of Image Based Rendering approaches and their use on Virtual Reality, including Virtual Photography and Cinematography, and Mobile Robot Navigation....

  18. Physically based rendering: from theory to implementation

    National Research Council Canada - National Science Library

    Pharr, Matt; Humphreys, Greg, Ph. D

    2010-01-01

    ... rendering algorithm variations. This book is not only a textbook for students, but also a useful reference book for practitioners in the field. The second edition has been extended with sections on Metropolis light transport, subsurface scattering, precomputed light transport, and more. Per Christensen Senior Software Developer, RenderMan Products,...

  19. Image Based Rendering and Virtual Reality

    DEFF Research Database (Denmark)

    Livatino, Salvatore

    The Presentation concerns with an overview of Image Based Rendering approaches and their use on Virtual Reality, including Virtual Photography and Cinematography, and Mobile Robot Navigation.......The Presentation concerns with an overview of Image Based Rendering approaches and their use on Virtual Reality, including Virtual Photography and Cinematography, and Mobile Robot Navigation....

  20. Moisture movements in render on brick wall

    DEFF Research Database (Denmark)

    Hansen, Kurt Kielsgaard; Munch, Thomas Astrup; Thorsen, Peter Schjørmann

    2003-01-01

    A three-layer render on brick wall used for building facades is studied in the laboratory. The vertical render surface is held in contact with water for 24 hours simulating driving rain while it is measured with non-destructive X-ray equipment every hour in order to follow the moisture front...... through the render and into the brick. The test specimen is placed between the source and the detector. The test specimens are all scanned before they are exposed to water. In that way the loss of counts from the dry scan to the wet scan qualitatively shows the presence of water. The results show nearly...... no penetration of water through the render and into the brick, and the results are independent of the start condition of the test specimens. Also drying experiments are performed. The results show a small difference in the rate of drying, in favour of the bricks without render....

  1. Physically based rendering from theory to implementation

    CERN Document Server

    Pharr, Matt

    2010-01-01

    "Physically Based Rendering, 2nd Edition" describes both the mathematical theory behind a modern photorealistic rendering system as well as its practical implementation. A method - known as 'literate programming'- combines human-readable documentation and source code into a single reference that is specifically designed to aid comprehension. The result is a stunning achievement in graphics education. Through the ideas and software in this book, you will learn to design and employ a full-featured rendering system for creating stunning imagery. This book features new sections on subsurface scattering, Metropolis light transport, precomputed light transport, multispectral rendering, and much more. It includes a companion site complete with source code for the rendering system described in the book, with support for Windows, OS X, and Linux. Code and text are tightly woven together through a unique indexing feature that lists each function, variable, and method on the page that they are first described.

  2. Optimization-Based Wearable Tactile Rendering.

    Science.gov (United States)

    Perez, Alvaro G; Lobo, Daniel; Chinello, Francesco; Cirio, Gabriel; Malvezzi, Monica; San Martin, Jose; Prattichizzo, Domenico; Otaduy, Miguel A

    2016-10-20

    Novel wearable tactile interfaces offer the possibility to simulate tactile interactions with virtual environments directly on our skin. But, unlike kinesthetic interfaces, for which haptic rendering is a well explored problem, they pose new questions about the formulation of the rendering problem. In this work, we propose a formulation of tactile rendering as an optimization problem, which is general for a large family of tactile interfaces. Based on an accurate simulation of contact between a finger model and the virtual environment, we pose tactile rendering as the optimization of the device configuration, such that the contact surface between the device and the actual finger matches as close as possible the contact surface in the virtual environment. We describe the optimization formulation in general terms, and we also demonstrate its implementation on a thimble-like wearable device. We validate the tactile rendering formulation by analyzing its force error, and we show that it outperforms other approaches.

  3. Publication rates in peer-reviewed journals of abstracts presented at the Oral and Maxillofacial Surgery Society of Turkey meetings 2007-2012.

    Science.gov (United States)

    Yolcu, Umit; Ozcan, Ayse

    2015-11-01

    The purpose of this study was to find out the rate of peer-reviewed publication of full papers of abstracts presented at the annual meeting of the Oral and Maxillofacial Surgery Society of Turkey, and to identify the time taken for publication, subspecialty, and study design. All abstracts accepted for presentation at the meetings in 2007-12 were identified from the books of abstracts, and evidence of publication was sought from PubMed and Google Scholar. The following variables were evaluated: publication rate, type of presentation (oral or poster), time to publication, subspecialty, study design, name of the journal in which the paper was published, impact factor of the journal, author affiliation, change in number of authors and origin of the study. A total of 1322 abstracts were presented between 2007 and 2012. Of these, 246 (19%) were subsequently published in peer-reviewed journals, including 110/390 oral presentations (28%) and 136/932 poster presentations (15%). Oral presentations were more likely to be published than poster presentations (p=0.000). The mean (SD) time from presentation to publication was 17 (15) months. Anatomical presentations had the highest publication rate (8/11), whereas orthognathic surgery had the lowest (5/67, 7%). Technical notes (5/9) and animal studies (32/70, 46%) were the most common types of publication. Only 246 of the 1322 abstracts (19%) were subsequently published as full papers, which is lower than previously reported in oral and maxillofacial surgery.

  4. Dentistry and food safety – the oral health of food handlers at a public hospital in the city of Belém, Pará

    Directory of Open Access Journals (Sweden)

    Elaine Beatriz Teixeira Ramalho

    2008-01-01

    Full Text Available Objective: This research evaluated the oral health of 40 food handlers in the Nutrition and Diet Unit of a public hospital in Belém-Pará. Methods: Interview and intra-oral examination of the subjects.Results: The results showed a high prevalence of tooth decay and periodontal disease, in addition to a low level of education and motivation as regards oral health care in the studied sample.Conclusion: The authors concluded that oral health care and education should be included in publications for and training of food handlers,since oral health promotion would benefit these workers directly, by increasing their quality of life, and indirectly benefit the entirecommunity that consumes the food prepared by them. The results and conclusions of this work should encourage the development of oralhealth care promotion programmers as regards this particular group of employees, the food handlers.

  5. 3D Rendering - Techniques and Challenges

    Directory of Open Access Journals (Sweden)

    Ekta Walia

    2010-04-01

    Full Text Available Computer generated images and animations are getting more and more common. They are used in many different contexts such as movies,mobiles, medical visualization, architectural visualization and CAD. Advanced ways of describing surface and light source properties are important to ensure that artists are able to create realistic and stylish looking images. Even when using advanced rendering algorithms such as ray tracing, time required for shading may contribute towards a large part of the image creation time. Therefore both performance and flexibility is important in a rendering system. This paper gives a comparative study of various 3D Rendering techniques and their challenges in a complete and systematic manner.

  6. FAST CROWD RENDERING IN COMPUTER GAMES

    Directory of Open Access Journals (Sweden)

    Kaya OĞUZ

    2010-06-01

    Full Text Available Computer games, with the speed advancements of graphical processors, are coming closer to the quality of cinema industry. Contrary to offline rendering of the scenes in a motion picture, computer games should be able to render at 30 frames per second. Therefore, CPU and memory performance are sought by using various techniques. This paper is about using instancing feature of contemporary graphical processors along with level of detail techniques which has been in use for a very long time. Using instancing, 15,000 instances were successfully rendered at 30 frames per second using a very low %10 CPU usage. The application can render 40,000 instances at 13 frames per second.

  7. Visibility-Aware Direct Volume Rendering

    Institute of Scientific and Technical Information of China (English)

    Wai-Ho Mak; Yingcai Wu; Ming-Yuen Chan; Huamin Qu

    2011-01-01

    Direct volume rendering (DVR) is a powerful visualization technique which allows users to effectively explore and study volumetric datasets. Different transparency settings can be flexibly assigned to different structures such that some valuable information can be revealed in direct volume rendered images (DVRIs). However, end-users often feel that some risks are always associated with DVR because they do not know whether any important information is missing from the transparent regions of DVRIs. In this paper, we investigate how to semi-automatically generate a set of DVRIs and also an animation which can reveal information missed in the original DVRIs and meanwhile satisfy some image quality criteria such as coherence. A complete framework is developed to tackle various problems related to the generation and quality evaluation of visibility-aware DVRIs and animations. Our technique can reduce the risk of using direct volume rendering and thus boost the confidence of users in volume rendering systems.

  8. ARC Code TI: SLAB Spatial Audio Renderer

    Data.gov (United States)

    National Aeronautics and Space Administration — SLAB is a software-based, real-time virtual acoustic environment rendering system being developed as a tool for the study of spatial hearing. SLAB is designed to...

  9. Layered Textures for Image-Based Rendering

    Institute of Scientific and Technical Information of China (English)

    en-Cheng Wang; ui-Yu Li; in Zheng; n-Hua Wu

    2004-01-01

    An extension to texture mapping is given in this paper for improving the efficiency of image-based rendering. For a depth image with an orthogonal displacement at each pixel, it is decomposed by the displacement into a series of layered textures (LTs) with each one having the same displacement for all its texels. Meanwhile,some texels of the layered textures are interpolated for obtaining a continuous 3D approximation of the model represented in the depth image. Thus, the plane-to-plane texture mapping can be used to map these layered textures to produce novel views and the advantages can be obtained as follows: accelerating the rendering speed,supporting the 3D surface details and view motion parallax, and avoiding the expensive task of hole-filling in the rendering stage. Experimental results show the new method can produce high-quality images and run faster than many famous image-based rendering techniques.

  10. Composed Scattering Model for Direct Volume Rendering

    Institute of Scientific and Technical Information of China (English)

    蔡文立; 石教英

    1996-01-01

    Based on the equation of transfer in transport theory of optical physics,a new volume rendering model,called composed scattering model(CSM),is presented.In calculating the scattering term of the equation,it is decomposed into volume scattering intensity and surface scattering intensity,and they are composed with the boundary detection operator as the weight function.This proposed model differs from the most current volume rendering models in the aspect that in CSM segmentation and illumination intensity calculation are taken as two coherent parts while in existing models they are regarded as two separate ones.This model has been applied to the direct volume rendering of 3D data sets obtained by CT and MRI.The resultant images show not only rich details but also clear boundary surfaces.CSM is demonstrated to be an accurate volume rendering model suitable for CT and MRI data sets.

  11. Prevalence of oral alterations in infants seen at the public pediatric dental clinics from Ponta Grossa - PR, Brazil

    Directory of Open Access Journals (Sweden)

    BALDANI Márcia Helena

    2001-01-01

    Full Text Available This investigation was carried out in order to determine the prevalence of oral alterations among 200 infants aged 0 to 24 months (108 males and 92 females, who were seen at public pediatric dental clinics from Ponta Grossa - PR, Brazil. The infants were examined during routine appointments. The data were analyzed and the results revealed that 21.00% of the children had oral conditions, which were more frequent among children aged 0 to 3 months (26.98%. The most prevalent condition was the inclusion cyst (35.71%, followed by benign migratory glossitis (23.81% and candidiasis (11.90%. The prevalence of inclusion cysts was higher among females (10.87%, and the benign migratory glossitis was more frequently seen in males (6.48%. No tumors were found. With regard to the management of the conditions, it was noticed that no treatment was required in 76.19% of the cases. These findings are in agreement with those reported in the literature, and it was concluded that most of the oral conditions in infants are benign and do not require any treatment. In spite of that, health professionals (dentists and pediatricians must be aware of those alterations in order to tranquilize the children's parents and to detect the need for any intervention.

  12. Patients' choice of payment system in the Swedish Public Dental Service--views on dental care and oral health.

    Science.gov (United States)

    Ostberg, Anna-Lena; Ahlström, Birgitta; Hakeberg, Magnus

    2013-01-01

    The aim of this study was to generate new knowledge of considerations and factors having impacted the patients' choice of payment system and their views on oral health. Moreover, their later attitudes to the prepaid risk-related payment system, having been enrolled or not, were explored. A qualitative design was chosen and data was collected through semi-structured interviews.Twenty patients in the Public Dental Service (PDS) in western Sweden were strategically sampled with reference to gender, age (older/younger adults), residence (rural/urban), and choice of payment system:fee-for-service or capitation plan.The interview guide covered areas concerning the payment systems, patient considerations before choosing system, views of their own oral health and experiences of received dental care within the chosen system.The analysis was performed according to basic principles of qualitative content analysis. The results revealed two themes expressing the latent content. In the theme "The individual's relation to the PDS", expectations of the care, feelings of safety and aspects of responsibility emerged.The theme"Health-related attitudes and perceptions" revealed that views on health and self-assessment of oral health influenced the patients' considerations. Moreover, the perceived influence on oral health and risk thinking emerged as important factors in this theme. The conclusion was that the individual's relation to the PDS together with his/her health-related attitudes and perceptions were the main factors impacting the choice of payment system in the PDS. A health promotion perspective should be applied, empowering the patients to develop their risk awareness and their own resources.

  13. Oral tongue cancer in public hospitals in Madrid, Spain (1990-2008).

    Science.gov (United States)

    García-Kass, A-I; Herrero-Sánchez, A; Esparza-Gómez, G

    2016-11-01

    The cancer which appears in the mobile portion of the tongue is the most common neoplasm of the oral cavity. The objective of this study was to analyse oral tongue cancer epidemiology in a population of 610 patients diagnosed between 1990 and 2008 and detailed in the Tumour Registry of the Madrid region. A retrospective analysis based on the following variables provided in the Tumour Registry was achieved: age, gender, histology, stage, location, treatment. Descriptive and analytic statistics with these variables, using Pearson's Chi-square test to study the relationship between the qualitative variables. Patients' mean age was 61.53±13.95 years, with a gender ratio of 2.09:1 (413 males vs 197 females). The lesion was mainly localized in the lateral border of tongue, with other sites (dorsal face, ventral face, lingual tonsil, contiguous sites, tongue NOS) represented at lower rates. Squamous cell carcinomas (94.9%) far outweighted other histologies (salivary gland tumours, soft tissue tumours, haematolymphoid tumours). 59% of the cases appeared in localized stages, versus 35.2% in regional and 4.8% in distant stages. Surgery was the most frequently used treatment, followed by surgery in combination with radiotherapy. Oral tongue cancer is a disease of the elderly, with a male predominance. It mainly appears in its lateral border, localized squamous cell carcinomas representing the great majority of lingual neoplasms.

  14. Oral Cancer Exam

    Medline Plus

    Full Text Available ... for signs of oral cancer. For Patients and the Public Oral Cancer Pamphlet that describes the risk factors, signs and symptoms of oral cancer, and the importance of detecting the disease in its early ...

  15. Oral Cancer Exam

    Medline Plus

    Full Text Available ... for signs of oral cancer. For Patients and the Public Oral Cancer Pamphlet that describes the risk factors, signs and symptoms of oral cancer, and the importance of detecting the disease in its early ...

  16. Rendering and Compositing Infrastructure Improvements to VisIt for Insitu Rendering

    Energy Technology Data Exchange (ETDEWEB)

    Loring, Burlen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ruebel, Oliver [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-01-28

    Compared to posthoc rendering, insitu rendering often generates larger numbers of images, as a result rendering performance and scalability are critical in the insitu setting. In this work we present improvements to VisIt's rendering and compositing infrastructure that deliver increased performance and scalability in both posthoc and insitu settings. We added the capability for alpha blend compositing and use it with ordered compositing when datasets have disjoint block domain decomposition to optimize the rendering of transparent geometry. We also made improvements that increase overall efficiency by reducing communication and data movement and have addressed a number of performance issues. We structured our code to take advantage of SIMD parallelization and use threads to overlap communication and compositing. We tested our improvements on a 20 core workstation using 8 cores to render geometry generated from a $256^3$ cosmology dataset and on a Cray XC31 using 512 cores to render geometry generated from a $2000^2 \\times 800$ plasma dataset. Our results show that ordered compositing provides a speed up of up to $4 \\times$ over the current sort first strategy. The other improvements resulted in modest speed up with one notable exception where we achieve up to $40 \\times$ speed up of rendering and compositing of opaque geometry when both opaque and transparent geometry are rendered together. We also investigated the use of depth peeling, but found that the implementation provided by VTK is substantially slower,both with and without GPU acceleration, than a local camera order sort.

  17. Brain Image Representation and Rendering: A Survey

    Directory of Open Access Journals (Sweden)

    Mudassar Raza

    2012-09-01

    Full Text Available Brain image representation and rendering processes are basically used for evaluation, development and investigation consent experimental examination and formation of brain images of a variety of modalities that includes the major brain types like MEG, EEG, PET, MRI, CT or microscopy. So, there is a need to conduct a study to review the existing work in this area. This paper provides a review of different existing techniques and methods regarding the brain image representation and rendering. Image Rendering is the method of generating an image by means of a model, through computer programs. The basic purpose of brain image representation and rendering processes is to analyze the brain images precisely in order to effectively diagnose and examine the diseases and problems. The basic objective of this study is to evaluate and discuss different techniques and approaches proposed in order to handle different brain imaging types. The paper provides a short overview of different methods, in the form of advantages and limitations, presented in the prospect of brain image representation and rendering along with their sub categories proposed by different authors.

  18. Equalizer: a scalable parallel rendering framework.

    Science.gov (United States)

    Eilemann, Stefan; Makhinya, Maxim; Pajarola, Renato

    2009-01-01

    Continuing improvements in CPU and GPU performances as well as increasing multi-core processor and cluster-based parallelism demand for flexible and scalable parallel rendering solutions that can exploit multipipe hardware accelerated graphics. In fact, to achieve interactive visualization, scalable rendering systems are essential to cope with the rapid growth of data sets. However, parallel rendering systems are non-trivial to develop and often only application specific implementations have been proposed. The task of developing a scalable parallel rendering framework is even more difficult if it should be generic to support various types of data and visualization applications, and at the same time work efficiently on a cluster with distributed graphics cards. In this paper we introduce a novel system called Equalizer, a toolkit for scalable parallel rendering based on OpenGL which provides an application programming interface (API) to develop scalable graphics applications for a wide range of systems ranging from large distributed visualization clusters and multi-processor multipipe graphics systems to single-processor single-pipe desktop machines. We describe the system architecture, the basic API, discuss its advantages over previous approaches, present example configurations and usage scenarios as well as scalability results.

  19. Adaptive Rendering Based on Visual Acuity Equations

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A new method of adaptable rendering for interaction in Virtual Environment(VE) through different visual acuity equations is proposed. An acuity factor equation of luminance vision is first given. Secondly, five equations which calculate the visual acuity through visual acuity factors are presented, and adaptive rendering strategy based on different visual acuity equations is given. The VE system may select one of them on the basis of the host's load, hereby select LOD for each model which would be rendered. A coarser LOD is selected where the visual acuity is lower, and a better LOD is used where it is higher. This method is tested through experiments and the experimental results show that it is effective.

  20. Rendering Falling Leaves on Graphics Hardware

    Directory of Open Access Journals (Sweden)

    Marcos Balsa

    2008-04-01

    Full Text Available There is a growing interest in simulating natural phenomena in computer graphics applications. Animating natural scenes in real time is one of the most challenging problems due to the inherent complexity of their structure, formed by millions of geometric entities, and the interactions that happen within. An example of natural scenario that is needed for games or simulation programs are forests. Forests are difficult to render because the huge amount of geometric entities and the large amount of detail to be represented. Moreover, the interactions between the objects (grass, leaves and external forces such as wind are complex to model. In this paper we concentrate in the rendering of falling leaves at low cost. We present a technique that exploits graphics hardware in order to render thousands of leaves with different falling paths in real time and low memory requirements.

  1. Blender cycles lighting and rendering cookbook

    CERN Document Server

    Iraci, Bernardo

    2013-01-01

    An in-depth guide full of step-by-step recipes to explore the concepts behind the usage of Cycles. Packed with illustrations, and lots of tips and tricks; the easy-to-understand nature of the book will help the reader understand even the most complex concepts with ease.If you are a digital artist who already knows your way around Blender, and you want to learn about the new Cycles' rendering engine, this is the book for you. Even experts will be able to pick up new tips and tricks to make the most of the rendering capabilities of Cycles.

  2. Volume Rendering for Curvilinear and Unstructured Grids

    Energy Technology Data Exchange (ETDEWEB)

    Max, N; Williams, P; Silva, C; Cook, R

    2003-03-05

    We discuss two volume rendering methods developed at Lawrence Livermore National Laboratory. The first, cell projection, renders the polygons in the projection of each cell. It requires a global visibility sort in order to composite the cells in back to front order, and we discuss several different algorithms for this sort. The second method uses regularly spaced slice planes perpendicular to the X, Y, or Z axes, which slice the cells into polygons. Both methods are supplemented with anti-aliasing techniques to deal with small cells that might fall between pixel samples or slice planes, and both have been parallelized.

  3. GPU Pro 5 advanced rendering techniques

    CERN Document Server

    Engel, Wolfgang

    2014-01-01

    In GPU Pro5: Advanced Rendering Techniques, section editors Wolfgang Engel, Christopher Oat, Carsten Dachsbacher, Michal Valient, Wessam Bahnassi, and Marius Bjorge have once again assembled a high-quality collection of cutting-edge techniques for advanced graphics processing unit (GPU) programming. Divided into six sections, the book covers rendering, lighting, effects in image space, mobile devices, 3D engine design, and compute. It explores rasterization of liquids, ray tracing of art assets that would otherwise be used in a rasterized engine, physically based area lights, volumetric light

  4. Digital color acquisition, perception, coding and rendering

    CERN Document Server

    Fernandez-Maloigne, Christine; Macaire, Ludovic

    2013-01-01

    In this book the authors identify the basic concepts and recent advances in the acquisition, perception, coding and rendering of color. The fundamental aspects related to the science of colorimetry in relation to physiology (the human visual system) are addressed, as are constancy and color appearance. It also addresses the more technical aspects related to sensors and the color management screen. Particular attention is paid to the notion of color rendering in computer graphics. Beyond color, the authors also look at coding, compression, protection and quality of color images and videos.

  5. Haptic rendering for simulation of fine manipulation

    CERN Document Server

    Wang, Dangxiao; Zhang, Yuru

    2014-01-01

    This book introduces the latest progress in six degrees of freedom (6-DoF) haptic rendering with the focus on a new approach for simulating force/torque feedback in performing tasks that require dexterous manipulation skills. One of the major challenges in 6-DoF haptic rendering is to resolve the conflict between high speed and high fidelity requirements, especially in simulating a tool interacting with both rigid and deformable objects in a narrow space and with fine features. The book presents a configuration-based optimization approach to tackle this challenge. Addressing a key issue in man

  6. Promoting Oral Production through the Task-Based Learning Approach: A Study in a Public Secondary School in Colombia

    Directory of Open Access Journals (Sweden)

    Peña Mireya

    2009-11-01

    Full Text Available Spoken language is used less confidently by learners in the English as a foreign language (efl classroom in secondary schools, and this has become a challenge for most teachers. This article describes an action research experience carried out at Francisco de Paula Santander, a public school in Bogotá, in 2004. The study was developed with a sample of learners belonging to four groups of seven graders along nine months. Data were collected by means of audio recordings, field notes and proformas. The results of the study let us analyze the different demands of transactional and interactional activities among novice efl speakers. They can also be considered an attempt to understand the implications of such activities within the framework of the Task-Based Learning approach presented by Willis (1996. Key words: Oral interaction, Task-Based Learning (tbl Los estudiantes de los colegios de secundaria usan con menos seguridad el lenguaje oral en las clases de inglés como lengua extranjera y esto se ha constituido en un reto para muchos profesores. Este artículo describe una experiencia de investigación acción adelantada en el colegio público Francisco de Paula Santander en Bogotá, en el año 2004. El estudio se realizó con una muestra de estudiantes pertenecientes a cuatro cursos de séptimo grado, a lo largo de nueve meses. Los datos se recolectaron mediante grabaciones de audio, notas de campo y proformas. Los resultados del estudio nos permiten analizar las exigencias diferenciadas de las actividades interaccionales y transaccionales para hablantes novatos del inglés como lengua extranjera. También se pueden considerar como un intento por comprender las implicaciones de dichas actividades en el marco del enfoque de aprendizaje basado en tareas, presentado por Willis (1996. Palabras clave: Interacción oral, aprendizaje basado en tareas

  7. Rendering Visible: Painting and Sexuate Subjectivity

    Science.gov (United States)

    Daley, Linda

    2015-01-01

    In this essay, I examine Luce Irigaray's aesthetic of sexual difference, which she develops by extrapolating from Paul Klee's idea that the role of painting is to render the non-visible rather than represent the visible. This idea is the premise of her analyses of phenomenology and psychoanalysis and their respective contributions to understanding…

  8. Haptic rendering for dental training system

    Institute of Scientific and Technical Information of China (English)

    WANG DangXiao; ZHANG YuRu; WANG Yong; L(U) PeiJun; ZHOU RenGe; ZHOU WanLin

    2009-01-01

    Immersion and Interaction are two key features of virtual reality systems,which are especially important for medical applications.Based on the requirement of motor skill training in dental surgery,haptic rendering method based on triangle model is investigated in this paper.Multi-rate haptic rendering architecture is proposed to solve the contradiction between fidelity and efficiency requirements.Realtime collision detection algorithm based on spatial partition and time coherence is utilized to enable fast contact determination.Proxy-based collision response algorithm is proposed to compute surface contact point.Cutting force model based on piecewise contact transition model is proposed for dental drilling simulation during tooth preparation.Velocity-driven levels of detail hapUc rendering algorithm is proposed to maintain high update rate for complex scenes with a large number of triangles.Hapticvisual collocated dental training prototype is established using half-mirror solution.Typical dental operations have been realized Including dental caries exploration,detection of boundary within dental crose-section plane,and dental drilling during tooth preparation.The haptic rendering method is a fundamental technology to improve Immersion and interaction of virtual reality training systems,which is useful not only in dental training,but also in other surgical training systems.

  9. ProteinShader: illustrative rendering of macromolecules

    Directory of Open Access Journals (Sweden)

    Weber Joseph R

    2009-03-01

    Full Text Available Abstract Background Cartoon-style illustrative renderings of proteins can help clarify structural features that are obscured by space filling or balls and sticks style models, and recent advances in programmable graphics cards offer many new opportunities for improving illustrative renderings. Results The ProteinShader program, a new tool for macromolecular visualization, uses information from Protein Data Bank files to produce illustrative renderings of proteins that approximate what an artist might create by hand using pen and ink. A combination of Hermite and spherical linear interpolation is used to draw smooth, gradually rotating three-dimensional tubes and ribbons with a repeating pattern of texture coordinates, which allows the application of texture mapping, real-time halftoning, and smooth edge lines. This free platform-independent open-source program is written primarily in Java, but also makes extensive use of the OpenGL Shading Language to modify the graphics pipeline. Conclusion By programming to the graphics processor unit, ProteinShader is able to produce high quality images and illustrative rendering effects in real-time. The main feature that distinguishes ProteinShader from other free molecular visualization tools is its use of texture mapping techniques that allow two-dimensional images to be mapped onto the curved three-dimensional surfaces of ribbons and tubes with minimum distortion of the images.

  10. Rendering Visible: Painting and Sexuate Subjectivity

    Science.gov (United States)

    Daley, Linda

    2015-01-01

    In this essay, I examine Luce Irigaray's aesthetic of sexual difference, which she develops by extrapolating from Paul Klee's idea that the role of painting is to render the non-visible rather than represent the visible. This idea is the premise of her analyses of phenomenology and psychoanalysis and their respective contributions to understanding…

  11. Temporomandibular disorders and oral habits in high-school adolescents: a public health issue?

    OpenAIRE

    OLIVEIRA,Carolline Bronzeado de; Lima,Jully Anne Soares de; SILVA,Pâmela Lopes Pedro da; Forte, Franklin Delano Soares [UNESP; Bonan,Paulo Rogério Ferreti; Batista, André Ulisses Dantas

    2016-01-01

    ABSTRACT Objective: Determine the prevalence of signs and symptoms of temporomandibular disorder (TMD) and its relationship with parafunctional habits in a sample of adolescents. Methods: The sample consisted of 129 high school students, between 16 and 19 years old in public schools. Data were collected through: a questionnaire about parafunctional habits and TMD symptoms, the Fonseca's index (DMF) and a summarized protocol of clinical evaluation of the TMD signals. These data were analyz...

  12. RAY TRACING RENDER MENGGUNAKAN FRAGMENT ANTI ALIASING

    Directory of Open Access Journals (Sweden)

    Febriliyan Samopa

    2008-07-01

    Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Rendering is generating surface and three-dimensional effects on an object displayed on a monitor screen. Ray tracing as a rendering method that traces ray for each image pixel has a drawback, that is, aliasing (jaggies effect. There are some methods for executing anti aliasing. One of those methods is OGSS (Ordered Grid Super Sampling. OGSS is able to perform aliasing well. However, this method requires more computation time since sampling of all pixels in the image will be increased. Fragment Anti Aliasing (FAA is a new alternative method that can cope with the drawback. FAA will check the image when performing rendering to a scene. Jaggies effect is only happened at curve and gradient object. Therefore, only this part of object that will experience sampling magnification. After this sampling magnification and the pixel values are computed, then downsample is performed to retrieve the original pixel values. Experimental results show that the software can implement ray tracing well in order to form images, and it can implement FAA and OGSS technique to perform anti aliasing. In general, rendering using FAA is faster than using OGSS

  13. [Oral health in 12 year-old students from public and private schools in the city of Goiânia, Brazil].

    Science.gov (United States)

    Freire, Maria do Carmo Matias; Reis, Sandra Cristina Guimaraes Bahia; Gonçalves, Michele Martins; Balbo, Patrícia Lima; Leles, Cláudio Rodrigues

    2010-08-01

    To compare 12-year-old students from public and private schools in the city of Goiânia, Brazil, in terms of the prevalence of caries, periodontal conditions, dentofacial anomalies, and fluorosis. In 2003, the 2002-2003 Oral Health Conditions in the Brazilian Population project (SB Brasil) was expanded to Goiânia as a cross-sectional study, as described in the present article. The sample included 1 947 students from urban schools: 1 790 (91.9%) attended public schools and 157 (8.1%) attended private schools. Data on the following oral conditions were collected through clinical examination: dental caries (decayed, missing, or filled teeth index, DMFT), periodontal condition (Community Periodontal Index, CPI), dentofacial anomaly (Dental Aesthetics Index, DAI), and dental fluorosis (Dean index). The groups were compared using the chi-square and Mann-Whitney U tests. There were differences between the public and private schools for all the variables. DMFT, CPI, and DAI indexes were higher in children from public schools (P private schools (P school was associated with the oral health condition of the children in this sample. Investments in actions and services to mitigate this inequality and its effects should be made as part of the policies to promote oral health.

  14. Automatic Image-Based Pencil Sketch Rendering

    Institute of Scientific and Technical Information of China (English)

    王进; 鲍虎军; 周伟华; 彭群生; 徐迎庆

    2002-01-01

    This paper presents an automatic image-based approach for converting greyscale images to pencil sketches, in which strokes follow the image features. The algorithm first extracts a dense direction field automatically using Logical/Linear operators which embody the drawing mechanism. Next, a reconstruction approach based on a sampling-and-interpolation scheme is introduced to generate stroke paths from the direction field. Finally, pencil strokes are rendered along the specified paths with consideration of image tone and artificial illumination.As an important application, the technique is applied to render portraits from images with little user interaction. The experimental results demonstrate that the approach can automatically achieve compelling pencil sketches from reference images.

  15. Anti-Aliased Rendering of Water Surface

    Institute of Scientific and Technical Information of China (English)

    Xue-Ying Qin; Eihachiro Nakamae; Wei Hua; Yasuo Nagai; Qun-Sheng Peng

    2004-01-01

    Water surface is one of the most important components of landscape scenes. When rendering spacious far from the viewpoint. This is because water surface consists of stochastic water waves which are usually modeled by periodic bump mapping. The incident rays on the water surface are actually scattered by the bumped waves,pattern, we estimate this solid angle of reflected rays and trace these rays. An image-based accelerating method is adopted so that the contribution of each reflected ray can be quickly obtained without elaborate intersection calculation. We also demonstrate anti-aliased shadows of sunlight and skylight on the water surface. Both the rendered images and animations show excellent effects on the water surface of a reservoir.

  16. Optimization techniques for computationally expensive rendering algorithms

    OpenAIRE

    Navarro Gil, Fernando; Gutiérrez Pérez, Diego; Serón Arbeloa, Francisco José

    2012-01-01

    Realistic rendering in computer graphics simulates the interactions of light and surfaces. While many accurate models for surface reflection and lighting, including solid surfaces and participating media have been described; most of them rely on intensive computation. Common practices such as adding constraints and assumptions can increase performance. However, they may compromise the quality of the resulting images or the variety of phenomena that can be accurately represented. In this thesi...

  17. Visualization of Medpor implants using surface rendering

    Institute of Scientific and Technical Information of China (English)

    WANG Meng; GUI Lai; LIU Xiao-jing

    2011-01-01

    Background The Medpor surgical implant is one of the easiest implants in clinical practice, especially in craniomaxillofacial surgery. It is often used as a bone substitute material for the repair of skull defects and facial deformities. The Medpor implant has several advantages but its use is limited because it is radiolucent in both direct radiography and conventional computed tomography, causing serious problems with visualization.Methods In this study, a new technique for visualizing Medpor implants was evaluated in 10 patients who had undergone facial reconstruction using the material. Continuous volume scans were made using a 16-channel tomographic scanner and 3D reconstruction software was used to create surface renderings. The threshold values for surface renderings of the implant ranged from -70 HU to -20 HU, with bone as the default.Results The shape of the implants and the spatial relationship between bone and implant could both be displayed.Conclusion Surface rendering can allow successful visualization of Medpor implants in the body.

  18. Evaluation of international case studies within 'Live.Learn.Laugh.': a unique global public-private partnership to promote oral health.

    Science.gov (United States)

    Dugdill, Lindsey; Pine, Cynthia M

    2011-08-01

    The partnership between the Féderation Dentaire International (FDI), and Unilever Oral Care, aims to raise awareness of oral health globally; to enable FDI member associations to promote oral health; and to increase the visibility of the FDI and authority of Unilever oral care brands worldwide. Country Projects between National Dental Associations (NDAs), the member associations of FDI, and Unilever Oral Care local companies have been established as a key strand of the partnership. This paper reports on the evaluation of an in-depth sample of Country Projects (n=5) to determine their potential to impact on oral health. Five country sites were selected as being indicative of different programme delivery types. Each site received a two-day visit during Spring-Summer 2009, which enabled the evaluators to audit what was delivered in practice compared with the original written project briefs and to undertake interviews of study site staff. 39 projects in 36 countries have been initiated. In those examined by site visits, clear evidence was found of capacity building to deliver oral health. In some countries, widespread population reach had been prioritised. Effectiveness of partnership working varied depending on the strength of the relationship between the NDA and local Unilever Oral Care representatives and alignment with national marketing strategy. The quality of internal evaluation varied considerably. Over a million people had been reached directly by Country Projects and this public-private partnership has made a successful start. To move towards improving oral health rather than only awareness raising; future Country Projects would benefit from being limited to certain evidence-based intervention designs, and using an agreed core indicator set in order to allow cross-country comparison of intervention outcomes. © 2011 FDI World Dental Federation.

  19. Oral conditions and body weight in children from a public school in Manaus, AM, Brazil

    Directory of Open Access Journals (Sweden)

    Samara Pinho ASSI

    Full Text Available Abstract Introduction Some studies have pointed to links between the prevalence of caries and periodontal disease, and the occurrence of overweight or obesity; but, few studies have been conducted in children. Objective To assess the relationship between periodontal disease, tooth decay and body weight in children from a public school in Manaus, AM, Brazil. Material and method The study included one hundred and sixty-nine children. Records were obtained of decayed, missing and filled (DMFT permanent teeth, and of decayed, extracted, or filled (DEF deciduous teeth, as well as the record of the community periodontal index (CPI. The classification of body weight category was obtained in percentile using the z-Score table. Result Higher averages of weight and body mass index (BMI were seen in the overweight and obesity groups (p0.05. All groups showed higher averages of CPI 0 in comparison with other CPI codes from 1 to 4 (p<0.05, and most of the children showed sites with probing depth <3.5 mm and without bleeding on probing. Conclusion There was no relationship between body weight and the occurrence of dental caries and periodontal disease in the studied population. Obesity and overweight showed no negative influence on the increase in the prevalence of these diseases.

  20. A 10-year analysis of the oral squamous cell carcinoma profile in patients from public health centers in Uruguay

    Directory of Open Access Journals (Sweden)

    Maria Laura Cosetti OLIVEIRA

    2015-01-01

    Full Text Available The aim of this study was to evaluate the demographic, clinical, and therapeutic characteristics and predictive factors of poor prognosis in patients with primary oral squamous cell carcinoma (OSCC in Uruguay. Medical records of patients with the diagnosis of primary OSCC treated between 2000 and 2010 in Uruguayan public hospitals were selected. Data on demographic characteristics, risk factors, clinical features, treatment, and outcome were collected. Associations of independent variables with outcomes were assessed using Pearson chi-squared and Fisher's tests. Of 200 patients with OSCC, 79.4% were men (3.8:1 male:female ratio, with a mean age of 60.75 ± 11.26 years. Tobacco and alcohol consumption were reported by 85.3% and 63.5% of patients, respectively. The most commonly affected location was the tongue (42.5%, with lesions exhibiting ulcerous aspects in 87.9% of cases and pain at the time of diagnosis in 70.4% of cases. One hundred sixty-one (82.1% patients had advanced-stage (III/IV OSCC. Surgery was the most common treatment option, and the overall 5-year survival rate was 58.5%. Univariate analysis showed that the predictors of poor prognosis were clinical aspect, size, regional metastasis, clinical stage, and treatment. In Uruguay, OSCC is diagnosed late, which is associated with a low survival rate. Educational and preventive measures and investment to improve early diagnosis should be undertaken.

  1. A 10-year analysis of the oral squamous cell carcinoma profile in patients from public health centers in Uruguay.

    Science.gov (United States)

    Oliveira, Maria Laura Cosetti; Wagner, Vivian Petersen; Sant'ana Filho, Manoel; Carrard, Vinicius Coelho; Hugo, Fernando Neves; Martins, Manoela Domingues

    2015-01-01

    The aim of this study was to evaluate the demographic, clinical, and therapeutic characteristics and predictive factors of poor prognosis in patients with primary oral squamous cell carcinoma (OSCC) in Uruguay. Medical records of patients with the diagnosis of primary OSCC treated between 2000 and 2010 in Uruguayan public hospitals were selected. Data on demographic characteristics, risk factors, clinical features, treatment, and outcome were collected. Associations of independent variables with outcomes were assessed using Pearson chi-squared and Fisher's tests. Of 200 patients with OSCC, 79.4% were men (3.8:1 male:female ratio), with a mean age of 60.75 ± 11.26 years. Tobacco and alcohol consumption were reported by 85.3% and 63.5% of patients, respectively. The most commonly affected location was the tongue (42.5%), with lesions exhibiting ulcerous aspects in 87.9% of cases and pain at the time of diagnosis in 70.4% of cases. One hundred sixty-one (82.1%) patients had advanced-stage (III/IV) OSCC. Surgery was the most common treatment option, and the overall 5-year survival rate was 58.5%. Univariate analysis showed that the predictors of poor prognosis were clinical aspect, size, regional metastasis, clinical stage, and treatment. In Uruguay, OSCC is diagnosed late, which is associated with a low survival rate. Educational and preventive measures and investment to improve early diagnosis should be undertaken.

  2. GPU Pro 4 advanced rendering techniques

    CERN Document Server

    Engel, Wolfgang

    2013-01-01

    GPU Pro4: Advanced Rendering Techniques presents ready-to-use ideas and procedures that can help solve many of your day-to-day graphics programming challenges. Focusing on interactive media and games, the book covers up-to-date methods producing real-time graphics. Section editors Wolfgang Engel, Christopher Oat, Carsten Dachsbacher, Michal Valient, Wessam Bahnassi, and Sebastien St-Laurent have once again assembled a high-quality collection of cutting-edge techniques for advanced graphics processing unit (GPU) programming. Divided into six sections, the book begins with discussions on the abi

  3. Haptic rendering foundations, algorithms, and applications

    CERN Document Server

    Lin, Ming C

    2008-01-01

    For a long time, human beings have dreamed of a virtual world where it is possible to interact with synthetic entities as if they were real. It has been shown that the ability to touch virtual objects increases the sense of presence in virtual environments. This book provides an authoritative overview of state-of-theart haptic rendering algorithms and their applications. The authors examine various approaches and techniques for designing touch-enabled interfaces for a number of applications, including medical training, model design, and maintainability analysis for virtual prototyping, scienti

  4. GPU PRO 3 Advanced rendering techniques

    CERN Document Server

    Engel, Wolfgang

    2012-01-01

    GPU Pro3, the third volume in the GPU Pro book series, offers practical tips and techniques for creating real-time graphics that are useful to beginners and seasoned game and graphics programmers alike. Section editors Wolfgang Engel, Christopher Oat, Carsten Dachsbacher, Wessam Bahnassi, and Sebastien St-Laurent have once again brought together a high-quality collection of cutting-edge techniques for advanced GPU programming. With contributions by more than 50 experts, GPU Pro3: Advanced Rendering Techniques covers battle-tested tips and tricks for creating interesting geometry, realistic sha

  5. Defects of organization in rendering medical aid

    Directory of Open Access Journals (Sweden)

    Shavkat Islamov

    2010-09-01

    Full Text Available The defects of organization at the medical institution mean disturbance of rules, norms and order of rendering of medical aid. The number of organization defects in Uzbekistan increased from 20.42%, in 1999 to 25.46% in 2001 with gradual decrease to 19.9% in 2003 and 16.66%, in 2006 and gradual increase to 21.95% and 28.28% (P<0.05 in 2005 and 2008. Among the groups of essential defects of organization there were following: disturbance of transportation rules, lack of dispensary care, shortcomings in keeping medical documentation.

  6. A Multiresolution Image Cache for Volume Rendering

    Energy Technology Data Exchange (ETDEWEB)

    LaMar, E; Pascucci, V

    2003-02-27

    The authors discuss the techniques and implementation details of the shared-memory image caching system for volume visualization and iso-surface rendering. One of the goals of the system is to decouple image generation from image display. This is done by maintaining a set of impostors for interactive display while the production of the impostor imagery is performed by a set of parallel, background processes. The system introduces a caching basis that is free of the gap/overlap artifacts of earlier caching techniques. instead of placing impostors at fixed, pre-defined positions in world space, the technique is to adaptively place impostors relative to the camera viewpoint. The positions translate with the camera but stay aligned to the data; i.e., the positions translate, but do not rotate, with the camera. The viewing transformation is factored into a translation transformation and a rotation transformation. The impostor imagery is generated using just the translation transformation and visible impostors are displayed using just the rotation transformation. Displayed image quality is improved by increasing the number of impostors and the frequency that impostors are re-rendering is improved by decreasing the number of impostors.

  7. Rendering of 3D Dynamic Virtual Environments

    CERN Document Server

    Catanese, Salvatore; Fiumara, Giacomo; Pagano, Francesco

    2011-01-01

    In this paper we present a framework for the rendering of dynamic 3D virtual environments which can be integrated in the development of videogames. It includes methods to manage sounds and particle effects, paged static geometries, the support of a physics engine and various input systems. It has been designed with a modular structure to allow future expansions. We exploited some open-source state-of-the-art components such as OGRE, PhysX, ParticleUniverse, etc.; all of them have been properly integrated to obtain peculiar physical and environmental effects. The stand-alone version of the application is fully compatible with Direct3D and OpenGL APIs and adopts OpenAL APIs to manage audio cards. Concluding, we devised a showcase demo which reproduces a dynamic 3D environment, including some particular effects: the alternation of day and night infuencing the lighting of the scene, the rendering of terrain, water and vegetation, the reproduction of sounds and atmospheric agents.

  8. Applicability of SWOT analysis for measuring quality of public oral health services as perceived by adult patients in Finland. Strengths, weaknesses, opportunities and threats.

    Science.gov (United States)

    Toivanen, T; Lahti, S; Leino-Kilpi, H

    1999-10-01

    To determine the applicability of SWOT analysis for measuring the quality of public oral health services from the adult client's perspective. Data were collected using a structured questionnaire developed in an earlier study. The study group consisted of all adult (over 18 years of age) clients (n = 256) using public municipal oral health services in Kirkkonummi, Finland, during 2 weeks in 1995. Before treatment, patients filled out a questionnaire that measured the importance of their expectations in different aspects of oral care. After the appointment, they filled out a similar questionnaire that measured the enactment of these expectations in the treatment situation. The response rate was 51%. The difference between subjective importance and enactment of expectations was tested by Wilcoxon's signed rank test. Results were interpreted using both a conventional analysis of "expectation enacted or not" and SWOT analysis, which is used in strategic planning to identify areas of strengths (S), weaknesses (W), opportunities (O) and threats (T) in an organisation. In 28 statements out of 35, the two analyses revealed similar interpretations. In most areas the patient-perceived quality of the services was good. Weaknesses were found in the following areas: communicating to patients the causes and risk of developing oral diseases, informing them about different treatment possibilities, and including patients in decision-making when choosing restorative materials. SWOT analysis provided more structured interpretation of the results, and can be more easily transferred to development of services.

  9. Evaluation of oral-motor movements and facial mimic in patients with head and neck burns by a public service in Brazil

    Directory of Open Access Journals (Sweden)

    Dicarla Motta Magnani

    2015-05-01

    Full Text Available OBJECTIVES: The purpose of this study was to analyze the characteristics of oral-motor movements and facial mimic in patients with head and neck burns. METHODS: An observational descriptive cross-sectional study was conducted with patients who suffered burns to the head and neck and who were referred to the Division of Orofacial Myology of a public hospital for assessment and rehabilitation. Only patients presenting deep partial-thickness and full-thickness burns to areas of the face and neck were included in the study. Patients underwent clinical assessment that involved an oral-motor evaluation, mandibular range of movement assessment, and facial mimic assessment. Patients were divided into two groups: G1 - patients with deep partial-thickness burns; G2 - patients with full-thickness burns. RESULTS: Our final study sample comprised 40 patients: G1 with 19 individuals and G2 with 21 individuals. The overall scores obtained in the clinical assessment of oral-motor organs indicated that patients with both second- and third-degree burns presented deficits related to posture, position and mobility of the oral-motor organs. Considering facial mimic, groups significantly differed when performing voluntary facial movements. Patients also presented limited maximal incisor opening. Deficits were greater for individuals in G2 in all assessments. CONCLUSION: Patients with head and neck burns present significant deficits related to posture, position and mobility of the oral myofunctional structures, including facial movements.

  10. Oral Cancer Exam

    Medline Plus

    Full Text Available ... signs of oral cancer. For Patients and the Public Oral Cancer Pamphlet that describes the risk factors, ... not collect any actual information. External Web Site Policy This graphic notice ( ) means that you are leaving ...

  11. Oral Cancer Exam

    Medline Plus

    Full Text Available ... signs of oral cancer. For Patients and the Public Oral Cancer Pamphlet that ... any actual information. External Web Site Policy This graphic notice ( ) means that you are leaving ...

  12. Photon Differential Splatting for Rendering Caustics

    DEFF Research Database (Denmark)

    Frisvad, Jeppe Revall; Schjøth, Lars; Erleben, Kenny;

    2014-01-01

    We present a photon splatting technique which reduces noise and blur in the rendering of caustics. Blurring of illumination edges is an inherent problem in photon splatting, as each photon is unaware of its neighbours when being splatted. This means that the splat size is usually based...... on heuristics rather than knowledge of the local flux density. We use photon differentials to determine the size and shape of the splats such that we achieve adaptive anisotropic flux density estimation in photon splatting. As compared to previous work that uses photon differentials, we present the first method...... where no photons or beams or differentials need to be stored in a map. We also present improvements in the theory of photon differentials, which give more accurate results and a faster implementation. Our technique has good potential for GPU acceleration, and we limit the number of parameters requiring...

  13. Immersive volume rendering of blood vessels

    Science.gov (United States)

    Long, Gregory; Kim, Han Suk; Marsden, Alison; Bazilevs, Yuri; Schulze, Jürgen P.

    2012-03-01

    In this paper, we present a novel method of visualizing flow in blood vessels. Our approach reads unstructured tetrahedral data, resamples it, and uses slice based 3D texture volume rendering. Due to the sparse structure of blood vessels, we utilize an octree to efficiently store the resampled data by discarding empty regions of the volume. We use animation to convey time series data, wireframe surface to give structure, and utilize the StarCAVE, a 3D virtual reality environment, to add a fully immersive element to the visualization. Our tool has great value in interdisciplinary work, helping scientists collaborate with clinicians, by improving the understanding of blood flow simulations. Full immersion in the flow field allows for a more intuitive understanding of the flow phenomena, and can be a great help to medical experts for treatment planning.

  14. Constructing And Rendering Vectorised Photographic Images

    Directory of Open Access Journals (Sweden)

    P. J. Willis

    2013-06-01

    Full Text Available We address the problem of representing captured images in the continuous mathematical space more usually associated with certain forms of drawn ('vector' images. Such an image is resolution-independent so can be used as a master for varying resolution-specific formats. We briefly describe the main features of a vectorising codec for photographic images, whose significance is that drawing programs can access images and image components as first-class vector objects. This paper focuses on the problem of rendering from the isochromic contour form of a vectorised image and demonstrates a new fill algorithm which could also be used in drawing generally. The fill method is described in terms of level set diffusion equations for clarity. Finally we show that image warping is both simplified and enhanced in the vector form and that we can demonstrate real histogram equalisation with genuinely rectangular histograms straightforwardly.

  15. Resolution-independent surface rendering using programmable graphics hardware

    Science.gov (United States)

    Loop, Charles T.; Blinn, James Frederick

    2008-12-16

    Surfaces defined by a Bezier tetrahedron, and in particular quadric surfaces, are rendered on programmable graphics hardware. Pixels are rendered through triangular sides of the tetrahedra and locations on the shapes, as well as surface normals for lighting evaluations, are computed using pixel shader computations. Additionally, vertex shaders are used to aid interpolation over a small number of values as input to the pixel shaders. Through this, rendering of the surfaces is performed independently of viewing resolution, allowing for advanced level-of-detail management. By individually rendering tetrahedrally-defined surfaces which together form complex shapes, the complex shapes can be rendered in their entirety.

  16. Dental neglect as a marker of broader neglect: a qualitative investigation of public health nurses’ assessments of oral health in preschool children

    Science.gov (United States)

    2013-01-01

    Background Child neglect is a pernicious child protection issue with adverse consequences that extend to adulthood. Simultaneously, though it remains prevalent, childhood dental caries is a preventable disease. Public health nurses play a pivotal role in assessing oral health in children as part of general health surveillance. However, little is known about how they assess dental neglect or what their thresholds are for initiating targeted support or instigating child protection measures. Understanding these factors is important to allow improvements to be made in care pathways. Methods We investigated public health nurses’ assessment of oral health in preschool children in relation to dental neglect and any associations they make with child neglect more broadly. A qualitative study was conducted in Scotland during 2011/12. Sixteen public health nurses were recruited purposively from one health region. Individual, semi-structured interviews were undertaken and data were analyzed inductively using a framework approach. Categories were subsequently mapped to the research questions. Results Public health nurses assess oral health through proxy measures, opportunistic observation and through discussion with parents. Dental neglect is rarely an isolated issue that leads on its own to child protection referral. It tends to be other presenting issues that initiate a response. Threshold levels for targeted support were based on two broad indicators: social issues and concerns about child (and parental) dental health. Thresholds for child protection intervention were untreated dental caries or significant dental pain. Barriers to intervention are that dental neglect may be ‘unseen’ and ‘unspoken’. The study revealed a communication gap in the care pathway for children where a significant dental problem is identified. Conclusions Public health nurses take their child protection role seriously, but rarely make a link between dental caries and child neglect. Clear

  17. Efficient and Effective Volume Visualization with Enhanced Isosurface Rendering

    CERN Document Server

    Yang, Fei; Tian, Jie

    2012-01-01

    Compared with full volume rendering, isosurface rendering has several well recognized advantages in efficiency and accuracy. However, standard isosurface rendering has some limitations in effectiveness. First, it uses a monotone colored approach and can only visualize the geometry features of an isosurface. The lack of the capability to illustrate the material property and the internal structures behind an isosurface has been a big limitation of this method in applications. Another limitation of isosurface rendering is the difficulty to reveal physically meaningful structures, which are hidden in one or multiple isosurfaces. As such, the application requirements of extract and recombine structures of interest can not be implemented effectively with isosurface rendering. In this work, we develop an enhanced isosurface rendering technique to improve the effectiveness while maintaining the performance efficiency of the standard isosurface rendering. First, an isosurface color enhancement method is proposed to il...

  18. From public mental health to community oral health: the impact of dental anxiety and fear on dental status.

    OpenAIRE

    Antonio eCrego; María eCarrillo; Jason Mathew Armfield; Martin eRomero

    2014-01-01

    Dental fear is a widely experienced problem. Through a 'vicious cycle dynamic', fear of dental treatment, lower use of dental services, and oral health diseases reinforce each other. Research on the antecedents of dental anxiety could help to break this cycle, providing useful knowledge to design effective community programs aimed at preventing dental fear and its oral health-related consequences. In this regard, frameworks that analyse the interplay between cognitive and psychosocial determi...

  19. From Public Mental Health to Community Oral Health: The Impact of Dental Anxiety and Fear on Dental Status

    OpenAIRE

    Crego, Antonio; Carrillo-Díaz, María; Armfield, Jason M.; Romero, Martín

    2014-01-01

    Dental fear is a widely experienced problem. Through a “vicious cycle dynamic,” fear of dental treatment, lower use of dental services, and oral health diseases reinforce each other. Research on the antecedents of dental anxiety could help to break this cycle, providing useful knowledge to design effective community programs aimed at preventing dental fear and its oral health-related consequences. In this regard, frameworks that analyze the interplay between cognitive and psychosocial determi...

  20. Direct volume rendering methods for cell structures.

    Science.gov (United States)

    Martišek, Dalibor; Martišek, Karel

    2012-01-01

    The study of the complicated architecture of cell space structures is an important problem in biology and medical research. Optical cuts of cells produced by confocal microscopes enable two-dimensional (2D) and three-dimensional (3D) reconstructions of observed cells. This paper discuses new possibilities for direct volume rendering of these data. We often encounter 16 or more bit images in confocal microscopy of cells. Most of the information contained in these images is unsubstantial for the human vision. Therefore, it is necessary to use mathematical algorithms for visualization of such images. Present software tools as OpenGL or DirectX run quickly in graphic station with special graphic cards, run very unsatisfactory on PC without these cards and outputs are usually poor for real data. These tools are black boxes for a common user and make it impossible to correct and improve them. With the method proposed, more parameters of the environment can be set, making it possible to apply 3D filters to set the output image sharpness in relation to the noise. The quality of the output is incomparable to the earlier described methods and is worth increasing the computing time. We would like to offer mathematical methods of 3D scalar data visualization describing new algorithms that run on standard PCs very well.

  1. The oral microbiome and adverse pregnancy outcomes

    Directory of Open Access Journals (Sweden)

    Cobb CM

    2017-08-01

    Full Text Available Charles M Cobb,1 Patricia J Kelly,2 Karen B Williams,3 Shilpa Babbar,4 Mubashir Angolkar,5 Richard J Derman6 1Department of Periodontics, School of Dentistry, 2Department of Public Health Nursing, School of Nursing and Health Studies, 3Department of Biomedical & Health Informatics, School of Medicine, University of Missouri-Kansas City, Kansas City, MO, 4Department of Obstetrics, Gynecology & Women’s Health, Division of Maternal & Fetal Medicine, School of Medicine, Saint Louis University, St Louis, MO, USA; 5Department of Public Health, Jawaharlal Nehru Medical College (JNMC, KLE University, Karnataka, India; 6Department of Obstetrics & Gynecology, Sidney Kimmel Medical College, Thomas Jefferson University, Philadelphia, PA, USA Abstract: Significant evidence supports an association between periodontal pathogenic bacteria and preterm birth and preeclampsia. The virulence properties assigned to specific oral pathogenic bacteria, for example, Fusobacterium nucleatum, Porphyromonas gingivalis, Filifactor alocis, Campylobacter rectus, and others, render them as potential collaborators in adverse outcomes of pregnancy. Several pathways have been suggested for this association: 1 hematogenous spread (bacteremia of periodontal pathogens; 2 hematogenous spread of multiple mediators of inflammation that are generated by the host and/or fetal immune response to pathogenic bacteria; and 3 the possibility of oral microbial pathogen transmission, with subsequent colonization, in the vaginal microbiome resulting from sexual practices. As periodontal disease is, for the most part, preventable, the medical and dental public health communities can address intervention strategies to control oral inflammatory disease, lessen the systemic inflammatory burden, and ultimately reduce the potential for adverse pregnancy outcomes. This article reviews the oral, vaginal, and placental microbiomes, considers their potential impact on preterm labor, and the future

  2. HDlive rendering images of the fetal stomach: a preliminary report.

    Science.gov (United States)

    Inubashiri, Eisuke; Abe, Kiyotaka; Watanabe, Yukio; Akutagawa, Noriyuki; Kuroki, Katumaru; Sugawara, Masaki; Maeda, Nobuhiko; Minami, Kunihiro; Nomura, Yasuhiro

    2015-01-01

    This study aimed to show reconstruction of the fetal stomach using the HDlive rendering mode in ultrasound. Seventeen healthy singleton fetuses at 18-34 weeks' gestational age were observed using the HDlive rendering mode of ultrasound in utero. In all of the fetuses, we identified specific spatial structures, including macroscopic anatomical features (e.g., the pyrous, cardia, fundus, and great curvature) of the fetal stomach, using the HDlive rendering mode. In particular, HDlive rendering images showed remarkably fine details that appeared as if they were being viewed under an endoscope, with visible rugal folds after 27 weeks' gestational age. Our study suggests that the HDlive rendering mode can be used as an additional method for evaluating the fetal stomach. The HDlive rendering mode shows detailed 3D structural images and anatomically realistic images of the fetal stomach. This technique may be effective in prenatal diagnosis for examining detailed information of fetal organs.

  3. Fast combinative volume rendering by indexed data structure

    Institute of Scientific and Technical Information of China (English)

    孙文武; 王文成; 吴恩华

    2001-01-01

    It is beneficial to study the interesting contents in a data set by combining and rendering variouscontents of the data. In this regard, an indexed data structure is proposed to facilitate the reorganization of data so that the contents of the data can be combined conveniently and only the selected contents in the data are processed for rendering. Based on the structure, the cells of different contents can be queued up easily so that the volume rendering can be conducted more accurately and quickly. Experimental results show that the indexed data structure is very efficient in improving combinative volume rendering.

  4. Oral Cancer Exam

    Medline Plus

    Full Text Available ... Contents NIDCR Home Oral Health Diseases and Conditions Gum Disease TMJ Disorders Oral Cancer Dry Mouth Burning Mouth Tooth Decay See All Oral Complications of Systemic Diseases Cancer Treatment Developmental Disabilities Diabetes Heart Disease HIV/AIDS See All Order Publications ...

  5. Evaluation of oral-motor movements and speech in patients with tetanus of a public service in Brazil.

    Science.gov (United States)

    Mangilli, L D; Sassi, F C; Jacomo, A; de Andrade, C R F

    2011-08-01

    The characterisation of oral-motor movements and speech of patients with tetanus were investigated to determine the existence of possible signs that are characteristic of this pathology. Thirteen patients clinically diagnosed with tetanus (10 with severe tetanus and three with very severe tetanus) and admitted to an intensive care unit underwent clinical evaluation of oral-motor movements and speech. Statistical analysis indicated significant between-group differences for speech motor functions, suggesting that individuals with very severe tetanus present rigidity as a characteristic interfering in articulatory precision (P = 0·035) and movement rate (P = 0·038). For lip closure, tongue movement, palatal elevation, gag reflex and voice quality, no between-group differences were identified for the specific abnormal characteristics. The observed abnormal results indicate that muscle strength and functional status of the oral-motor system presented by most of the participants of the study did not ensure the necessary integrity for satisfactory performance. The characterisation of the oral myofunctional aspects of patients with tetanus provides medical teams, patients and families with a wider and better description of the clinical situation, giving support to the diagnosis, prognostics and treatment. © 2010 Blackwell Publishing Ltd.

  6. Method of producing hydrogen, and rendering a contaminated biomass inert

    Science.gov (United States)

    Bingham, Dennis N [Idaho Falls, ID; Klingler, Kerry M [Idaho Falls, ID; Wilding, Bruce M [Idaho Falls, ID

    2010-02-23

    A method for rendering a contaminated biomass inert includes providing a first composition, providing a second composition, reacting the first and second compositions together to form an alkaline hydroxide, providing a contaminated biomass feedstock and reacting the alkaline hydroxide with the contaminated biomass feedstock to render the contaminated biomass feedstock inert and further producing hydrogen gas, and a byproduct that includes the first composition.

  7. 7 CFR 54.15 - Advance information concerning service rendered.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Advance information concerning service rendered. 54.15... Service § 54.15 Advance information concerning service rendered. Upon request of any applicant, all or any... SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED)...

  8. Impact of oral rehydration and selected public health interventions on reduction of mortality from childhood diarrhoeal diseases in Mexico.

    OpenAIRE

    Gutiérrez, G.; Tapia-Conyer, R.; Guiscafré, H.; Reyes, H; Martínez, H.; Kumate, J.

    1996-01-01

    Reported are the results of an analysis of mortality trends from diarrhoeal diseases among under-5-year-olds in Mexico between 1978 and 1993 in relation to the impact of education, basic sanitation, and selected medical care practices. The study period was divided into three stages; the first pre-dated the widespread application of oral rehydration therapy (ORT); the second, covered the implementation of a nationwide programme promoting ORT; and the third included additional measures, such as...

  9. Impact of oral rehydration and selected public health interventions on reduction of mortality from childhood diarrhoeal diseases in Mexico.

    OpenAIRE

    Gutiérrez, G.; TAPIA-CONYER, R.; Guiscafré, H; Reyes, H; Martínez, H.; Kumate, J

    1996-01-01

    Reported are the results of an analysis of mortality trends from diarrhoeal diseases among under-5-year-olds in Mexico between 1978 and 1993 in relation to the impact of education, basic sanitation, and selected medical care practices. The study period was divided into three stages; the first pre-dated the widespread application of oral rehydration therapy (ORT); the second, covered the implementation of a nationwide programme promoting ORT; and the third included additional measures, such as...

  10. Local and Global Illumination in the Volume Rendering Integral

    Energy Technology Data Exchange (ETDEWEB)

    Max, N; Chen, M

    2005-10-21

    This article is intended as an update of the major survey by Max [1] on optical models for direct volume rendering. It provides a brief overview of the subject scope covered by [1], and brings recent developments, such as new shadow algorithms and refraction rendering, into the perspective. In particular, we examine three fundamentals aspects of direct volume rendering, namely the volume rendering integral, local illumination models and global illumination models, in a wavelength-independent manner. We review the developments on spectral volume rendering, in which visible light are considered as a form of electromagnetic radiation, optical models are implemented in conjunction with representations of spectral power distribution. This survey can provide a basis for, and encourage, new efforts for developing and using complex illumination models to achieve better realism and perception through optical correctness.

  11. Research of global illumination algorithms rendering in glossy scene

    Institute of Scientific and Technical Information of China (English)

    BAI Shuangxue; ZHANG Qiang; ZHOU Dongsheng

    2012-01-01

    In computer graphic (CG), illumination rendering generated realistic effect at virtual scene is amazing. Not only plausible lighting effect is to show the relative position between of the objects, but also to reflect the material of visual appearance of the vir- tual objects. The diffuse-scene rendering reflectance credibility has gradually matured. Global illumination rendering method for the glossy material is still a challenge for the CG research. Because of the shiny materials is highly energy reflection between the com- plex light paths. Whether we trace glossy reflection paths, or use of one-reflection or multi-reflection approximate above complex il- lumination transmission is a difficult working. This paper we gather some commonly used global illumination algorithms recently year and its extension glossy scene improvements. And we introduce the limitation of classical algorithms rendering glossy scene and some extended solution. Finally, we will summarize the illumination rendering for specular scene, there are still some open prob- lems.

  12. Perception-based transparency optimization for direct volume rendering.

    Science.gov (United States)

    Chan, Ming-Yuen; Wu, Yingcai; Mak, Wai-Ho; Chen, Wei; Qu, Huamin

    2009-01-01

    The semi-transparent nature of direct volume rendered images is useful to depict layered structures in a volume. However, obtaining a semi-transparent result with the layers clearly revealed is difficult and may involve tedious adjustment on opacity and other rendering parameters. Furthermore, the visual quality of layers also depends on various perceptual factors. In this paper, we propose an auto-correction method for enhancing the perceived quality of the semi-transparent layers in direct volume rendered images. We introduce a suite of new measures based on psychological principles to evaluate the perceptual quality of transparent structures in the rendered images. By optimizing rendering parameters within an adaptive and intuitive user interaction process, the quality of the images is enhanced such that specific user requirements can be met. Experimental results on various datasets demonstrate the effectiveness and robustness of our method.

  13. A Volume Rendering Algorithm for Sequential 2D Medical Images

    Institute of Scientific and Technical Information of China (English)

    吕忆松; 陈亚珠

    2002-01-01

    Volume rendering of 3D data sets composed of sequential 2D medical images has become an important branch in image processing and computer graphics.To help physicians fully understand deep-seated human organs and focuses(e.g.a tumour)as 3D structures.in this paper,we present a modified volume rendering algorithm to render volumetric data,Using this method.the projection images of structures of interest from different viewing directions can be obtained satisfactorily.By rotating the light source and the observer eyepoint,this method avoids rotates the whole volumetric data in main memory and thus reduces computational complexity and rendering time.Experiments on CT images suggest that the proposed method is useful and efficient for rendering 3D data sets.

  14. Rendering an archive in three dimensions

    Science.gov (United States)

    Leiman, David A.; Twose, Claire; Lee, Teresa Y. H.; Fletcher, Alex; Yoo, Terry S.

    2003-05-01

    We examine the requirements for a publicly accessible, online collection of three-dimensional biomedical image data, including those yielded by radiological processes such as MRI, ultrasound and others. Intended as a repository and distribution mechanism for such medical data, we created the National Online Volumetric Archive (NOVA) as a case study aimed at identifying the multiple issues involved in realizing a large-scale digital archive. In the paper we discuss such factors as the current legal and health information privacy policy affecting the collection of human medical images, retrieval and management of information and technical implementation. This project culminated in the launching of a website that includes downloadable datasets and a prototype data submission system.

  15. Meeting the Oral Health Needs of Immigrants: National Public Health Services Vs. Charitable Volunteer Services In Rome, Italy

    Directory of Open Access Journals (Sweden)

    Denise Corridore

    2012-03-01

    Full Text Available

    Abstract:
    Background: oral health is an important aspect of well-being. In Italy immigrants can have different access to health care services, and can opt for the national Health Service (nHS and/ or private non- profit health care organizations. The purpose of this study was to develop an instrument to evaluate oral health in the immigrant population of rome and to investigate the differences between two different types of ser- vices: the First observation unit at the department of oral and Maxillo Facial Sciences, at the "Sapienza" university of rome (a nHS affiliate, and a charitable organization, the caritas dental center (cdc.
    Methods: a multiple-choice questionnaire was administered between the last trimester of 2006 and the first trimester of 2007. a chi square analysis was performed and the level of significance was set at p<0.05. reSulTS: The sample was composed of 250 people, of which 100 were patients of the cdc and 150 were patients of the nHS. The percentage of non-Italians was 80% (n=80 in the cdc sample, and only 16% (n=25 in the nHS sample. In the cdc, definitive resolving therapies, such as tooth extractions, prevailed (60% v’s 47% nHS; p=0.033. In addition, the frequency of consumption of sugary foods and drinks was significantly higher among cdc patients (31% reported to consume these over 9 times a day compared to nHS patients (11% reporting this consumption.
    Discussion: the study shows a substantial under using of the national Health Service for oral health care needs by the immigrant population. The particular composition of the sample, with a high prevalence being of romanian nationality, might reflect specific conditions of this nationality. The results showed that immigrants were satisfied with the health care even though they encountered difficulties in terms of level of communication.

  16. Multiresolution maximum intensity volume rendering by morphological adjunction pyramids

    NARCIS (Netherlands)

    Roerdink, Jos B.T.M.

    We describe a multiresolution extension to maximum intensity projection (MIP) volume rendering, allowing progressive refinement and perfect reconstruction. The method makes use of morphological adjunction pyramids. The pyramidal analysis and synthesis operators are composed of morphological 3-D

  17. Multiresolution Maximum Intensity Volume Rendering by Morphological Adjunction Pyramids

    NARCIS (Netherlands)

    Roerdink, Jos B.T.M.

    2001-01-01

    We describe a multiresolution extension to maximum intensity projection (MIP) volume rendering, allowing progressive refinement and perfect reconstruction. The method makes use of morphological adjunction pyramids. The pyramidal analysis and synthesis operators are composed of morphological 3-D

  18. Foggy Scene Rendering Based on Transmission Map Estimation

    Directory of Open Access Journals (Sweden)

    Fan Guo

    2014-01-01

    Full Text Available Realistic rendering of foggy scene is important in game development and virtual reality. Traditional methods have many parameters to control or require a long time to compute, and they are usually limited to depicting a homogeneous fog without considering the foggy scene with heterogeneous fog. In this paper, a new rendering method based on transmission map estimation is proposed. We first generate perlin noise image as the density distribution texture of heterogeneous fog. Then we estimate the transmission map using the Markov random field (MRF model and the bilateral filter. Finally, virtual foggy scene is realistically rendered with the generated perlin noise image and the transmission map according to the atmospheric scattering model. Experimental results show that the rendered results of our approach are quite satisfactory.

  19. Comparison of Morphological Pyramids for Multiresolution MIP Volume Rendering

    NARCIS (Netherlands)

    Roerdink, Jos B.T.M.

    2002-01-01

    We recently proposed a multiresolution representation for maximum intensity projection (MIP) volume rendering based on morphological adjunction pyramids which allow progressive refinement and have the property of perfect reconstruction. In this algorithm the pyramidal analysis and synthesis

  20. Experiencing "Macbeth": From Text Rendering to Multicultural Performance.

    Science.gov (United States)

    Reisin, Gail

    1993-01-01

    Shows how one teacher used innovative methods in teaching William Shakespeare's "Macbeth." Outlines student assignments including text renderings, rewriting a scene from the play, and creating a multicultural scrapbook for the play. (HB)

  1. View compensated compression of volume rendered images for remote visualization.

    Science.gov (United States)

    Lalgudi, Hariharan G; Marcellin, Michael W; Bilgin, Ali; Oh, Han; Nadar, Mariappan S

    2009-07-01

    Remote visualization of volumetric images has gained importance over the past few years in medical and industrial applications. Volume visualization is a computationally intensive process, often requiring hardware acceleration to achieve a real time viewing experience. One remote visualization model that can accomplish this would transmit rendered images from a server, based on viewpoint requests from a client. For constrained server-client bandwidth, an efficient compression scheme is vital for transmitting high quality rendered images. In this paper, we present a new view compensation scheme that utilizes the geometric relationship between viewpoints to exploit the correlation between successive rendered images. The proposed method obviates motion estimation between rendered images, enabling significant reduction to the complexity of a compressor. Additionally, the view compensation scheme, in conjunction with JPEG2000 performs better than AVC, the state of the art video compression standard.

  2. High-quality multi-resolution volume rendering in medicine

    Institute of Scientific and Technical Information of China (English)

    XIE Kai; YANG Jie; LI Xiao-liang

    2007-01-01

    In order to perform a high-quality interactive rendering of large medical data sets on a single off-theshelf PC, a LOD selection algorithm for multi-resolution volume rendering using 3D texture mapping is presented, which uses an adaptive scheme that renders the volume in a region-of-interest at a high resolution and the volume away from this region at lower resolutions. The algorithm is based on several important criteria, and rendering is done adaptively by selecting high-resolution cells close to a center of attention and low-resolution cells away from this area. In addition, our hierarchical level-of-detail representation guarantees consistent interpolation between different resolution levels. Experiments have been applied to a number of large medical data and have produced high quality images at interactive frame rates using standard PC hardware.

  3. Factors affecting extension workers in their rendering of effective ...

    African Journals Online (AJOL)

    Factors affecting extension workers in their rendering of effective service to pre ... the objective of achieving sustainable livelihoods for the poor and commonages. ... marketing and management to adequately service the land reform programs.

  4. does knowledge influence their attitude and comfort in rendering care?

    African Journals Online (AJOL)

    kemrilib

    Physicians and AIDS care: does knowledge influence their attitude and comfort in rendering ... experience, age and being a consultant or a senior resident influenced attitude, while male ..... having or not having children, prior instructions on ...

  5. Accelerating Monte Carlo Renderers by Ray Histogram Fusion

    Directory of Open Access Journals (Sweden)

    Mauricio Delbracio

    2015-03-01

    Full Text Available This paper details the recently introduced Ray Histogram Fusion (RHF filter for accelerating Monte Carlo renderers [M. Delbracio et al., Boosting Monte Carlo Rendering by Ray Histogram Fusion, ACM Transactions on Graphics, 33 (2014]. In this filter, each pixel in the image is characterized by the colors of the rays that reach its surface. Pixels are compared using a statistical distance on the associated ray color distributions. Based on this distance, it decides whether two pixels can share their rays or not. The RHF filter is consistent: as the number of samples increases, more evidence is required to average two pixels. The algorithm provides a significant gain in PSNR, or equivalently accelerates the rendering process by using many fewer Monte Carlo samples without observable bias. Since the RHF filter depends only on the Monte Carlo samples color values, it can be naturally combined with all rendering effects.

  6. A parallel architecture for interactively rendering scattering and refraction effects.

    Science.gov (United States)

    Bernabei, Daniele; Hakke-Patil, Ajit; Banterle, Francesco; Di Benedetto, Marco; Ganovelli, Fabio; Pattanaik, Sumanta; Scopigno, Roberto

    2012-01-01

    A new method for interactive rendering of complex lighting effects combines two algorithms. The first performs accurate ray tracing in heterogeneous refractive media to compute high-frequency phenomena. The second applies lattice-Boltzmann lighting to account for low-frequency multiple-scattering effects. The two algorithms execute in parallel on modern graphics hardware. This article includes a video animation of the authors' real-time algorithm rendering a variety of scenes.

  7. Wavelet subdivision methods gems for rendering curves and surfaces

    CERN Document Server

    Chui, Charles

    2010-01-01

    OVERVIEW Curve representation and drawing Free-form parametric curves From subdivision to basis functions Wavelet subdivision and editing Surface subdivision BASIS FUNCTIONS FOR CURVE REPRESENTATION Refinability and scaling functions Generation of smooth basis functions Cardinal B-splines Stable bases for integer-shift spaces Splines and polynomial reproduction CURVE SUBDIVISION SCHEMES Subdivision matrices and stencils B-spline subdivision schemes Closed curve rendering Open curve rendering BASIS FUNCTIONS GENERATED BY SUBDIVISION MATRICES Subdivision operators The up-sampling convolution ope

  8. A Sort-Last Rendering System over an Optical Backplane

    Directory of Open Access Journals (Sweden)

    Yasuhiro Kirihata

    2005-06-01

    Full Text Available Sort-Last is a computer graphics technique for rendering extremely large data sets on clusters of computers. Sort-Last works by dividing the data set into even-sized chunks for parallel rendering and then composing the images to form the final result. Since sort-last rendering requires the movement of large amounts of image data among cluster nodes, the network interconnecting the nodes becomes a major bottleneck. In this paper, we describe a sort-last rendering system implemented on a cluster of computers whose nodes are connected by an all-optical switch. The rendering system introduces the notion of the Photonic Computing Engine, a computing system built dynamically by using the optical switch to create dedicated network connections among cluster nodes. The sort-last volume rendering algorithm was implemented on the Photonic Computing Engine, and its performance is evaluated. Prelimi- nary experiments show that performance is affected by the image composition time and average payload size. In an attempt to stabilize the performance of the system, we have designed a flow control mechanism that uses feedback messages to dynamically adjust the data flow rate within the computing engine.

  9. Remote volume rendering pipeline for mHealth applications

    Science.gov (United States)

    Gutenko, Ievgeniia; Petkov, Kaloian; Papadopoulos, Charilaos; Zhao, Xin; Park, Ji Hwan; Kaufman, Arie; Cha, Ronald

    2014-03-01

    We introduce a novel remote volume rendering pipeline for medical visualization targeted for mHealth (mobile health) applications. The necessity of such a pipeline stems from the large size of the medical imaging data produced by current CT and MRI scanners with respect to the complexity of the volumetric rendering algorithms. For example, the resolution of typical CT Angiography (CTA) data easily reaches 512^3 voxels and can exceed 6 gigabytes in size by spanning over the time domain while capturing a beating heart. This explosion in data size makes data transfers to mobile devices challenging, and even when the transfer problem is resolved the rendering performance of the device still remains a bottleneck. To deal with this issue, we propose a thin-client architecture, where the entirety of the data resides on a remote server where the image is rendered and then streamed to the client mobile device. We utilize the display and interaction capabilities of the mobile device, while performing interactive volume rendering on a server capable of handling large datasets. Specifically, upon user interaction the volume is rendered on the server and encoded into an H.264 video stream. H.264 is ubiquitously hardware accelerated, resulting in faster compression and lower power requirements. The choice of low-latency CPU- and GPU-based encoders is particularly important in enabling the interactive nature of our system. We demonstrate a prototype of our framework using various medical datasets on commodity tablet devices.

  10. Fast DRR splat rendering using common consumer graphics hardware.

    Science.gov (United States)

    Spoerk, Jakob; Bergmann, Helmar; Wanschitz, Felix; Dong, Shuo; Birkfellner, Wolfgang

    2007-11-01

    Digitally rendered radiographs (DRR) are a vital part of various medical image processing applications such as 2D/3D registration for patient pose determination in image-guided radiotherapy procedures. This paper presents a technique to accelerate DRR creation by using conventional graphics hardware for the rendering process. DRR computation itself is done by an efficient volume rendering method named wobbled splatting. For programming the graphics hardware, NVIDIAs C for Graphics (Cg) is used. The description of an algorithm used for rendering DRRs on the graphics hardware is presented, together with a benchmark comparing this technique to a CPU-based wobbled splatting program. Results show a reduction of rendering time by about 70%-90% depending on the amount of data. For instance, rendering a volume of 2 x 10(6) voxels is feasible at an update rate of 38 Hz compared to 6 Hz on a common Intel-based PC using the graphics processing unit (GPU) of a conventional graphics adapter. In addition, wobbled splatting using graphics hardware for DRR computation provides higher resolution DRRs with comparable image quality due to special processing characteristics of the GPU. We conclude that DRR generation on common graphics hardware using the freely available Cg environment is a major step toward 2D/3D registration in clinical routine.

  11. Topical xylitol administration by parents for the promotion of oral health in infants: a caries prevention experiment at a Finnish Public Health Centre.

    Science.gov (United States)

    Mäkinen, Kauko K; Järvinen, Kirsti L; Anttila, Carita H; Luntamo, Leena M; Vahlberg, Tero

    2013-08-01

    This demonstration programme tested topical use of xylitol as a possible oral health promoting regimen in infants at a Finnish Public Health Centre in 2002-2011. Parents (usually mothers) began once- or twice-daily administration of a 45% solution of xylitol (2.96 m) onto all available deciduous teeth of their children at the age of approximately 6-8 months. The treatment (xylitol swabbing), which continued till the age of approximately 36 months (total duration 26-28 months), was carried out using cotton swabs or a children's toothbrush; the approximate daily xylitol usage was 13.5 mg per each deciduous tooth. At the age of 7 years, caries data on the deciduous dentition of 80 children were compared with those obtained from similar, untreated children (n = 90). Xylitol swabbing resulted in a significant (P caries compared with the comparison subjects (relative risk 2.1 and 4.0, respectively; 95% confidence intervals 1.42-3.09 and 2.01-7.98, respectively). Similar findings were obtained when the children were 5 or 6 years old. The treatment reduced the need of tooth filling relative risk and 95% confidence intervals at 7 years: 11.86 and 6.36-22.10, respectively; P dental health was accomplished in infants participating in a topical at-home xylitol administration experiment, which was offered to families in the area by the Public Health Centre as a supplement to standard oral health care. Caregiver assessment of the programme was mostly rated as high or satisfactory. © 2013 FDI World Dental Federation.

  12. Strengthening of oral health systems

    DEFF Research Database (Denmark)

    Petersen, Poul Erik

    2014-01-01

    Around the globe many people are suffering from oral pain and other problems of the mouth or teeth. This public health problem is growing rapidly in developing countries where oral health services are limited. Significant proportions of people are underserved; insufficient oral health care...... is either due to low availability and accessibility of oral health care or because oral health care is costly. In all countries, the poor and disadvantaged population groups are heavily affected by a high burden of oral disease compared to well-off people. Promotion of oral health and prevention of oral...... diseases must be provided through financially fair primary health care and public health intervention. Integrated approaches are the most cost-effective and realistic way to close the gap in oral health between rich and poor. The World Health Organization (WHO) Oral Health Programme will work...

  13. Impact of oral rehydration and selected public health interventions on reduction of mortality from childhood diarrhoeal diseases in Mexico.

    Science.gov (United States)

    Gutiérrez, G; Tapia-Conyer, R; Guiscafré, H; Reyes, H; Martínez, H; Kumate, J

    1996-01-01

    Reported are the results of an analysis of mortality trends from diarrhoeal diseases among under-5-year-olds in Mexico between 1978 and 1993 in relation to the impact of education, basic sanitation, and selected medical care practices. The study period was divided into three stages; the first pre-dated the widespread application of oral rehydration therapy (ORT); the second, covered the implementation of a nationwide programme promoting ORT; and the third included additional measures, such as immunization and improvements in basic sanitation. Mortality rates decreased progressively, at an average of 1.8% per year in the first stage, 6.4% in the second, and 17.8% in the third. The importance of literacy campaigns for women and the promotion of ORT was confirmed. Both of these measures reduced mortality; however, a greater reduction resulted from a massive immunization campaign against measles and improvements in sanitation (expansion of the drainage and piped water systems, improved water chlorination procedure, and effective prohibition of the use of sanitary sewage for vegetable irrigation).

  14. Oral Health Longitudinal Evaluation of students from a public school after guidance and implementaion of preventitive measures

    OpenAIRE

    2013-01-01

    Objective: To assess longitudinally the DMFT, plaque and gingival rates of children and teenagers from a public school in São José dos Campos, Brazil, after performing a preventive and motivational program through the University Extension program of School of Dentistry of Institute of Science and Technology of São José dos Campos – UNESP. Materials and Methods: 300 students were randomly selected and divided into three groups, Group 1: 100 children from 2nd to 5th grade of elementary school, ...

  15. Adaptive image contrast enhancement algorithm for point-based rendering

    Science.gov (United States)

    Xu, Shaoping; Liu, Xiaoping P.

    2015-03-01

    Surgical simulation is a major application in computer graphics and virtual reality, and most of the existing work indicates that interactive real-time cutting simulation of soft tissue is a fundamental but challenging research problem in virtual surgery simulation systems. More specifically, it is difficult to achieve a fast enough graphic update rate (at least 30 Hz) on commodity PC hardware by utilizing traditional triangle-based rendering algorithms. In recent years, point-based rendering (PBR) has been shown to offer the potential to outperform the traditional triangle-based rendering in speed when it is applied to highly complex soft tissue cutting models. Nevertheless, the PBR algorithms are still limited in visual quality due to inherent contrast distortion. We propose an adaptive image contrast enhancement algorithm as a postprocessing module for PBR, providing high visual rendering quality as well as acceptable rendering efficiency. Our approach is based on a perceptible image quality technique with automatic parameter selection, resulting in a visual quality comparable to existing conventional PBR algorithms. Experimental results show that our adaptive image contrast enhancement algorithm produces encouraging results both visually and numerically compared to representative algorithms, and experiments conducted on the latest hardware demonstrate that the proposed PBR framework with the postprocessing module is superior to the conventional PBR algorithm and that the proposed contrast enhancement algorithm can be utilized in (or compatible with) various variants of the conventional PBR algorithm.

  16. Encouraging Teenagers to Improve Speaking Skills through Games in a Colombian Public School (Motivación de adolescentes para mejorar su expresión oral mediante el juego en un colegio público colombiano)

    Science.gov (United States)

    León, William Urrutia; Cely, Esperanza Vega

    2010-01-01

    Our project was implemented with tenth grade students of a public school located in the Usme Zone in Bogotá. We decided to develop this action research project because we were concerned about our students' difficulties when attempting to speak English. They felt inhibited with activities that involved oral interaction mainly because they were…

  17. Clustered deep shadow maps for integrated polyhedral and volume rendering

    KAUST Repository

    Bornik, Alexander

    2012-01-01

    This paper presents a hardware-accelerated approach for shadow computation in scenes containing both complex volumetric objects and polyhedral models. Our system is the first hardware accelerated complete implementation of deep shadow maps, which unifies the computation of volumetric and geometric shadows. Up to now such unified computation was limited to software-only rendering . Previous hardware accelerated techniques can handle only geometric or only volumetric scenes - both resulting in the loss of important properties of the original concept. Our approach supports interactive rendering of polyhedrally bounded volumetric objects on the GPU based on ray casting. The ray casting can be conveniently used for both the shadow map computation and the rendering. We show how anti-aliased high-quality shadows are feasible in scenes composed of multiple overlapping translucent objects, and how sparse scenes can be handled efficiently using clustered deep shadow maps. © 2012 Springer-Verlag.

  18. Real-Time Rendering of Teeth with No Preprocessing

    DEFF Research Database (Denmark)

    Larsen, Christian Thode; Frisvad, Jeppe Revall; Jensen, Peter Dahl Ejby

    2012-01-01

    We present a technique for real-time rendering of teeth with no need for computational or artistic preprocessing. Teeth constitute a translucent material consisting of several layers; a highly scattering material (dentine) beneath a semitransparent layer (enamel) with a transparent coating (saliva......). In this study we examine how light interacts with this multilayered structure. In the past, rendering of teeth has mostly been done using image-based texturing or volumetric scans. We work with surface scans and have therefore developed a simple way of estimating layer thicknesses. We use scattering properties...... based on measurements reported in the optics literature, and we compare rendered results qualitatively to images of ceramic teeth created by denturists....

  19. [A hybrid volume rendering method using general hardware].

    Science.gov (United States)

    Li, Bin; Tian, Lianfang; Chen, Ping; Mao, Zongyuan

    2008-06-01

    In order to improve the effect and efficiency of the reconstructed image after hybrid volume rendering of different kinds of volume data from medical sequential slices or polygonal models, we propose a hybrid volume rendering method based on Shear-Warp with economical hardware. First, the hybrid volume data are pre-processed by Z-Buffer method and RLE (Run-Length Encoded) data structure. Then, during the process of compositing intermediate image, a resampling method based on the dual-interpolation and the intermediate slice interpolation methods is used to improve the efficiency and the effect. Finally, the reconstructed image is rendered by the texture-mapping technology of OpenGL. Experiments demonstrate the good performance of the proposed method.

  20. Universal Rendering Mechanism Supporting Dual-Mode Presentation

    Institute of Scientific and Technical Information of China (English)

    徐鹏; 杨文军; 王克宏

    2003-01-01

    XML is a standard for the exchange of business data that is completely platform and vendor neutral. Because XML data comes in many forms, one of the most important technologies needed for XML applications is the ability to convert the data into visible renderings. This paper focuses on the rendering of XML/XSL documents into a readable and printable format by means of a platform-independent process that enables high-quality printing of the product. This paper introduces the core components in the data rendering engine, the X2P server and different levels of object abstraction. The design pattern and the complete formatting and representation of the XSL stylesheet into different types of output formats in the X2P server are also given. The results show that the X2P sever simultaneously constructs the formatting object tree and the area tree in a very efficient design that saves execution time and memory.

  1. Virtual try-on through image-based rendering.

    Science.gov (United States)

    Hauswiesner, Stefan; Straka, Matthias; Reitmayr, Gerhard

    2013-09-01

    Virtual try-on applications have become popular because they allow users to watch themselves wearing different clothes without the effort of changing them physically. This helps users to make quick buying decisions and, thus, improves the sales efficiency of retailers. Previous solutions usually involve motion capture, 3D reconstruction or modeling, which are time consuming and not robust for all body poses. Our method avoids these steps by combining image-based renderings of the user and previously recorded garments. It transfers the appearance of a garment recorded from one user to another by matching input and recorded frames, image-based visual hull rendering, and online registration methods. Using images of real garments allows for a realistic rendering quality with high performance. It is suitable for a wide range of clothes and complex appearances, allows arbitrary viewing angles, and requires only little manual input. Our system is particularly useful for virtual try-on applications as well as interactive games.

  2. Dynamic miniature lighting system with low correlated colour temperature and high colour rendering index for museum lighting of fragile artefacts

    DEFF Research Database (Denmark)

    Thorseth, Anders; Corell, Dennis Dan; Poulsen, Peter Behrensdorff

    2013-01-01

    Illumination of fragile and irreplaceable historical objects exhibited to the public presents challenges with regards to: good colour rendering, low photochemical degradation of sensitive materials and general energy consumption. We present a dynamic tri-colour LED lighting system for illumination...... of historical artefacts in display cases at museums and other exhibitions, which can replace 3-5 Watt incandescent light bulbs with a correlated colour temperature (CCT) from 2000 K to 2400 K. The solution decreases the energy consumption by up to 80 %, while maintaining colour rendering indices (Ra) above 90...

  3. Oral Cancer Exam

    Medline Plus

    Full Text Available ... Cancer Dry Mouth Burning Mouth Tooth Decay See All Oral Complications of Systemic Diseases Cancer Treatment Developmental Disabilities Diabetes Heart Disease HIV/AIDS See All Order Publications English and Spanish brochures available free ...

  4. Oral Cancer Exam

    Medline Plus

    Full Text Available ... Diabetes Heart Disease HIV/AIDS See All Order Publications English and Spanish brochures available free of charge. ... early—when it can be treated more successfully. Publications​ For Health Professionals Detecting Oral Cancer: A Guide ...

  5. Efficient rendering of breaking waves using MPS method

    Institute of Scientific and Technical Information of China (English)

    WANG Qiang; ZHENG Yao; CHEN Chun; FUJIMOTO Tadahiro; CHIBA Norishige

    2006-01-01

    This paper proposes an approach for rendering breaking waves out of large-scale ofparticle-based simulation. Moving particle semi-implicit (MPS) is used to solve the governing equation, and 2D simulation is expanded to 3D representation by giving motion variation using fractional Brownian motion (fBm). The waterbody surface is reconstructed from the outlines of 2D simulation. The splashing effect is computed according to the properties of the particles. Realistic features of the wave are rendered on GPU, including the reflective and refractive effect and the effect of splash. Experiments showed that the proposed method can simulate large scale breaking waves efficiently.

  6. Beaming teaching application: recording techniques for spatial xylophone sound rendering

    DEFF Research Database (Denmark)

    Markovic, Milos; Madsen, Esben; Olesen, Søren Krarup;

    2012-01-01

    BEAMING is a telepresence research project aiming at providing a multimodal interaction between two or more participants located at distant locations. One of the BEAMING applications allows a distant teacher to give a xylophone playing lecture to the students. Therefore, rendering of the xylophone...... played at student's location is required at teacher's site. This paper presents a comparison of different recording techniques for a spatial xylophone sound rendering. Directivity pattern of the xylophone was measured and spatial properties of the sound field created by a xylophone as a distributed sound...

  7. Chromium Renderserver: Scalable and Open Source Remote RenderingInfrastructure

    Energy Technology Data Exchange (ETDEWEB)

    Paul, Brian; Ahern, Sean; Bethel, E. Wes; Brugger, Eric; Cook,Rich; Daniel, Jamison; Lewis, Ken; Owen, Jens; Southard, Dale

    2007-12-01

    Chromium Renderserver (CRRS) is software infrastructure thatprovides the ability for one or more users to run and view image outputfrom unmodified, interactive OpenGL and X11 applications on a remote,parallel computational platform equipped with graphics hardwareaccelerators via industry-standard Layer 7 network protocolsand clientviewers. The new contributions of this work include a solution to theproblem of synchronizing X11 and OpenGL command streams, remote deliveryof parallel hardware-accelerated rendering, and a performance analysis ofseveral different optimizations that are generally applicable to avariety of rendering architectures. CRRSis fully operational, Open Sourcesoftware.

  8. Depth of Field Effects for Interactive Direct Volume Rendering

    KAUST Repository

    Schott, Mathias

    2011-06-01

    In this paper, a method for interactive direct volume rendering is proposed for computing depth of field effects, which previously were shown to aid observers in depth and size perception of synthetically generated images. The presented technique extends those benefits to volume rendering visualizations of 3D scalar fields from CT/MRI scanners or numerical simulations. It is based on incremental filtering and as such does not depend on any precomputation, thus allowing interactive explorations of volumetric data sets via on-the-fly editing of the shading model parameters or (multi-dimensional) transfer functions. © 2011 The Author(s).

  9. Morphological study of transpterional-insula approach using volume rendering.

    Science.gov (United States)

    Jia, Linpei; Su, Lue; Sun, Wei; Wang, Lina; Yao, Jihang; Li, Youqiong; Luo, Qi

    2012-11-01

    This study describes the measurements of inferior circular insular sulcus (ICIS) and the shortest distance from ICIS to the temporal horn and determines the position of the incision, which does less harm to the temporal stem in the transpterional-insula approach using volume-rendering technique. Results of the research showed that one-third point over the anterior side of ICIS may be the ideal penetration point during operation. And there is no difference between 2 hemispheres (P ICIS from other Chinese researches demonstrated that volume rendering is a reliable method in insular research that enables mass measurements.

  10. Potential, Implications and Solutions Regarding the Use of Rendered Animal Fats in Aquafeeds

    Directory of Open Access Journals (Sweden)

    Jesse T. Trushenski

    2009-01-01

    Full Text Available Problem statement: In the past, aquafeeds were comprised largely of fish meal and fish oil derived from marine reduction fisheries. In addition to being highly palatable and readily digested by cultured fishes, these feedstuffs were historically inexpensive sources of protein, energy and essential nutrients. However, increasing cost and concerns over safety and sustainability have greatly incentivized the transition from fish meal and oil to alternative sources of protein and lipid for aquafeed formulation. Fish oil replacement is proving more difficult than originally anticipated, particularly for marine carnivorous species. Approach: If complete fish oil replacement is not a viable goal for fish nutritionists and aquafeed manufacturers, at a minimum, we must strive for judicious use of limited marine-derived resources. In the present review, we explore the opportunities of using rendered fats as alternatives to marine-derived fish oils in aquaculture feeds, beginning with a discussion of the products themselves before reviewing the most recent literature and concluding with a discussion of the future of these products in aquafeed formulations. Results: Rendered fats have not been as intensively evaluated in aquaculture nutrition as grain and oilseed-derived lipids, although a number of recent publications on the subject suggest increasing interest in the use of rendered products in aquafeeds. Conclusion: Poultry fat, beef tallow, pork lard and to a lesser extent, yellow/restaurant grease and catfish oil, have been investigated individually or in combination with other lipids in feeds for a broad range of cultured taxa with generally acceptable results.

  11. Dynamic miniature lighting system with low correlated colour temperature and high colour rendering index for museum lighting of fragile artefacts

    DEFF Research Database (Denmark)

    Thorseth, Anders; Corell, Dennis Dan; Poulsen, Peter Behrensdorff

    2013-01-01

    Illumination of fragile and irreplaceable historical objects exhibited to the public presents challenges with regards to: good colour rendering, low photochemical degradation of sensitive materials and general energy consumption. We present a dynamic tri-colour LED lighting system for illumination...... of historical artefacts in display cases at museums and other exhibitions, which can replace 3-5 Watt incandescent light bulbs with a correlated colour temperature (CCT) from 2000 K to 2400 K. The solution decreases the energy consumption by up to 80 %, while maintaining colour rendering indices (Ra) above 90...... and important special colour rendering indices R9 between 50 and 90, while decreasing the level of harmful short wavelength radiation by between 20 - 30 %....

  12. The initial pharmaceutical development of an artesunate/amodiaquine oral formulation for the treatment of malaria: a public-private partnership

    Directory of Open Access Journals (Sweden)

    Gaudin Karen

    2011-05-01

    Full Text Available Abstract Background Artemisinin-based combination therapy is currently recommended worldwide for the treatment of uncomplicated malaria. Fixed-dose combinations are preferred as they favour compliance. This paper reports on the initial phases of the pharmaceutical development of an artesunate-amodiaquine (ASAQ bilayer co-formulation tablet, undertaken following pre-formulation studies by a network of scientists and industrials from institutions of both industrialized and low income countries. Methods Pharmaceutical development was performed by a research laboratory at the University Bordeaux Segalen, School of Pharmacy, for feasibility and early stability studies of various drug formulations, further transferred to a company specialized in pharmaceutical development, and then provided to another company for clinical batch manufacturing. The work was conducted by a regional public-private not-for-profit network (TropiVal within a larger Public Private partnership (the FACT project, set up by WHO/TDR, Médecins Sans Frontières and the Drugs for Neglected Disease initiative (DNDi. Results The main pharmaceutical goal was to combine in a solid oral form two incompatible active principles while preventing artesunate degradation under tropical conditions. Several options were attempted and failed to provide satisfactory stability results: incorporating artesunate in the external phase of the tablets, adding a pH regulator, alcoholic wet granulation, dry granulation, addition of an hydrophobic agent, tablet manufacturing in controlled conditions. However, long-term stability could be achieved, in experimental batches under GMP conditions, by physical separation of artesunate and amodiaquine in a bilayer co-formulation tablet in alu-alu blisters. Conduction of the workplan was monitored by DNDi. Conclusions Collaborations between research and industrial groups greatly accelerated the process of development of the bi-layered ASAQ tablet. Lack of public

  13. Remote parallel rendering for high-resolution tiled display walls

    KAUST Repository

    Nachbaur, Daniel

    2014-11-01

    © 2014 IEEE. We present a complete, robust and simple to use hardware and software stack delivering remote parallel rendering of complex geometrical and volumetric models to high resolution tiled display walls in a production environment. We describe the setup and configuration, present preliminary benchmarks showing interactive framerates, and describe our contributions for a seamless integration of all the software components.

  14. Light Field Rendering for Head Mounted Displays using Pixel Reprojection

    DEFF Research Database (Denmark)

    Hansen, Anne Juhler; Kraus, Martin; Klein, Jákup

    2017-01-01

    of the information of the different images is redundant, we use pixel reprojection from the corner cameras to compute the remaining images in the light field. We compare the reprojected images with directly rendered images in a user test. In most cases, the users were unable to distinguish the images. In extreme...

  15. An experiment on the color rendering of different light sources

    Science.gov (United States)

    Fumagalli, Simonetta; Bonanomi, Cristian; Rizzi, Alessandro

    2013-02-01

    The color rendering index (CRI) of a light source attempts to measure how much the color appearance of objects is preserved when they are illuminated by the given light source. This problem is of great importance for various industrial and scientific fields, such as lighting architecture, design, ergonomics, etc. Usually a light source is specified through the Correlated Color Temperature or CCT. However two (or more) light sources with the same CCT but different spectral power distribution can exist. Therefore color samples viewed under two light sources with equal CCTs can appear different. Hence, the need for a method to assess the quality of a given illuminant in relation to color. Recently CRI has had a renewed interest because of the new LED-based lighting systems. They usually have a color rendering index rather low, but good preservation of color appearance and a pleasant visual appearance (visual appeal). Various attempts to develop a new color rendering index have been done so far, but still research is working for a better one. This article describes an experiment performed by human observers concerning the appearance preservation of color under some light sources, comparing it with a range of available color rendering indices.

  16. Interacting with Stroke-Based Rendering on a Wall Display

    NARCIS (Netherlands)

    Grubert, Jens; Hanckock, Mark; Carpendale, Sheelagh; Tse, Edward; Isenberg, Tobias

    2007-01-01

    We introduce two new interaction techniques for creating and interacting with non-photorealistic images using stroke-based rendering. We provide bimanual control of a large interactive canvas through both remote pointing and direct touch. Remote pointing allows people to sit and interact at a distan

  17. Selection of plasters and renders for salt laden masonry substrates

    NARCIS (Netherlands)

    Groot, C.; Hees, R.P.J. van; Wijffels, T.J.

    2009-01-01

    The choice of a repair plaster or render by architects often appears to be the result of fortuitous circumstances, such as prior experience with a plaster or a recommendation by a producer. Seldom is the choice based on a sound assessment of the state of the building and the wall that is to be repai

  18. Depth-Dependent Halos : Illustrative Rendering of Dense Line Data

    NARCIS (Netherlands)

    Everts, Maarten H.; Bekker, Henk; Roerdink, Jos B.T.M.; Isenberg, Tobias

    2009-01-01

    We present a technique for the illustrative rendering of 3D line data at interactive frame rates. We create depth-dependent halos around lines to emphasize tight line bundles while less structured lines are de-emphasized. Moreover, the depth-dependent halos combined with depth cueing via line width

  19. Virtual Environment of Real Sport Hall and Analyzing Rendering Quality

    Directory of Open Access Journals (Sweden)

    Filip Popovski

    2015-02-01

    Full Text Available Here is presented virtual environment of a real sport hall created in Quest3D VR Edition. All analyzes of the rendering quality, techniques of interaction and performance of the system in real time are presented. We made critical analysis on all of these techniques on different machines and have excellent results.

  20. Interacting with Stroke-Based Rendering on a Wall Display

    NARCIS (Netherlands)

    Grubert, Jens; Hanckock, Mark; Carpendale, Sheelagh; Tse, Edward; Isenberg, Tobias

    2007-01-01

    We introduce two new interaction techniques for creating and interacting with non-photorealistic images using stroke-based rendering. We provide bimanual control of a large interactive canvas through both remote pointing and direct touch. Remote pointing allows people to sit and interact at a

  1. 7 CFR 54.1016 - Advance information concerning service rendered.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Advance information concerning service rendered. 54..., Processing, and Packaging of Livestock and Poultry Products § 54.1016 Advance information concerning service... MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE...

  2. 7 CFR 53.17 - Advance information concerning service rendered.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Advance information concerning service rendered. 53.17... (CONTINUED) LIVESTOCK (GRADING, CERTIFICATION, AND STANDARDS) Regulations Service § 53.17 Advance information... SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED)...

  3. Fast Rendering of Realistic Virtual Character in Game Scene

    Directory of Open Access Journals (Sweden)

    Mengzhao Yang

    2013-07-01

    Full Text Available Human skin is made up of multiple translucent layers and rendering of skin appearance usually acquire complex modeling and massive calculation. In some practical applications such as 3D game development, we not only approximate the realistic looking skin but also develop efficient method to implement easily for meeting needs of real-time rendering. In this study, we solve the problem of wrap lighting and introduce a surface details approximation method to give realistic rendering of virtual character. Our method considers that different thicknesses of geometry on the skin surface can result in different scattering degree of incident light and so pre-calculate the diffuse falloff into a look-up texture. Also, we notice that scattering is strongly color dependent and small bumps are common on the skin surface and so pre-soften the finer details on the skin surface according to the R/G/B channel. At last, we linearly interpolate the diffuse lighting with different scattering degree from the look-up texture sampled with the curvature and NdotL. Experiment results show that the proposed approach yields realistic virtual character and obtains high frames per second in real-time rendering.

  4. Democratizing rendering for multiple viewers in surround VR systems

    KAUST Repository

    Schulze, Jürgen P.

    2012-03-01

    We present a new approach for how multiple users\\' views can be rendered in a surround virtual environment without using special multi-view hardware. It is based on the idea that different parts of the screen are often viewed by different users, so that they can be rendered from their own view point, or at least from a point closer to their view point than traditionally expected. The vast majority of 3D virtual reality systems are designed for one head-tracked user, and a number of passive viewers. Only the head tracked user gets to see the correct view of the scene, everybody else sees a distorted image. We reduce this problem by algorithmically democratizing the rendering view point among all tracked users. Researchers have proposed solutions for multiple tracked users, but most of them require major changes to the display hardware of the VR system, such as additional projectors or custom VR glasses. Our approach does not require additional hardware, except the ability to track each participating user. We propose three versions of our multi-viewer algorithm. Each of them balances image distortion and frame rate in different ways, making them more or less suitable for certain application scenarios. Our most sophisticated algorithm renders each pixel from its own, optimized camera perspective, which depends on all tracked users\\' head positions and orientations. © 2012 IEEE.

  5. Ozone inactivation of infectious prions in rendering plant and municipal wastewaters.

    Science.gov (United States)

    Ding, Ning; Neumann, Norman F; Price, Luke M; Braithwaite, Shannon L; Balachandran, Aru; Belosevic, Miodrag; Gamal El-Din, Mohamed

    2014-02-01

    Disposal of tissues and organs associated with prion accumulation and infectivity in infected animals (designated as Specified Risk Materials [SRM]) is strictly regulated by the Canadian Food Inspection Agency (CFIA); however, the contamination of wastewater from slaughterhouses that handle SRM still poses public concern. In this study, we examined for the first time the partitioning of infectious prions in rendering plant wastewater and found that a large proportion of infectious prions were partitioned into the scum layer formed at the top after gravity separation, while quite a few infectious prions still remained in the wastewater. Subsequently, we assessed the ozone inactivation of infectious prions in the raw, natural gravity-separated and dissolved air flotation (DAF)-treated (i.e., primary-treated) rendering plant wastewater, and in a municipal final effluent (i.e., secondary-treated municipal wastewater). At applied ozone doses of 43.4-44.6 mg/L, ozone was instantaneously depleted in the raw rendering plant wastewater, while a greater than 4-log10 inactivation was achieved at a 5 min exposure in the DAF-treated rendering plant wastewater. Prion inactivation in the municipal final effluent was conducted with two levels of applied ozone doses of 13.4 and 22.5mg/L, and a greater than 4-log10 inactivation was achieved at a 5 min exposure with the higher ozone dose. Efficiency factor Hom (EFH) models were used to model (i.e., fit) the experimental data. The CT (disinfectant concentration multiplied by contact time) values were determined for 2- and 3-log10 inactivation in the municipal final effluent treated with an ozone dose of 13.4 mg/L. Our results indicate that ozone could serve as a final barrier for prion inactivation in primary- and/or secondary-treated wastewaters.

  6. Examining the association between oral health and oral HPV infection.

    Science.gov (United States)

    Bui, Thanh Cong; Markham, Christine M; Ross, Michael Wallis; Mullen, Patricia Dolan

    2013-09-01

    Oral human papillomavirus (HPV) infection is the cause of 40% to 80% of oropharyngeal cancers; yet, no published study has examined the role of oral health in oral HPV infection, either independently or in conjunction with other risk factors. This study examined the relation between oral health and oral HPV infection and the interactive effects of oral health, smoking, and oral sex on oral HPV infection. Our analyses comprised 3,439 participants ages 30 to 69 years for whom data on oral HPV and oral health were available from the nationally representative 2009-2010 National Health and Nutrition Examination Survey. Results showed that higher unadjusted prevalence of oral HPV infection was associated with four measures of oral health, including self-rated oral health as poor-to-fair [prevalence ratio (PR) = 1.56; 95% confidence interval (CI), 1.25-1.95], indicated the possibility of gum disease (PR = 1.51; 95% CI, 1.13-2.01), reported use of mouthwash to treat dental problems in the past week (PR = 1.28; 95% CI, 1.07-1.52), and higher number of teeth lost (Ptrend = 0.035). In multivariable logistic regression models, oral HPV infection had a statistically significant association with self-rated overall oral health (OR = 1.55; 95% CI, 1.15-2.09), independent of smoking and oral sex. In conclusion, poor oral health was an independent risk factor of oral HPV infection, irrespective of smoking and oral sex practices. Public health interventions may aim to promote oral hygiene and oral health as an additional measure to prevent HPV-related oral cancers.

  7. A Brief Discussion on How to Effectively Carry out Oral English Activities in Public English Audio-Visual-Oral Classroom in Higher Vocational Colleges%浅谈如何有效开展高职公共英语视听说课堂口语活动

    Institute of Scientific and Technical Information of China (English)

    郑筱筠

    2015-01-01

    高职公共英语视听说课程旨在提高学生的英语交际水平,根据高职学生的特点,在满足高职学生需求的前提下,如何利用有限课堂时间展开一些实用、有效、操作性强的课堂口语活动是视听说教学的研究重点。本文参考建构主义学习理论,探讨了高职公共英语视听说课堂口语活动设计应遵循的原则和相关步骤。%Higher vocational public English audio-visual-oral course is aimed at improving students' English communication a-bility. In accordance with the characteristics of higher vocational students, under the premise of meeting the requirement of higher vocational students, how to use the limited classroom time to car-ry out some practical, effective and operational classroom oral English activities is the research focus of audio-visual-oral teaching. Referring to constructivism learning theory, this paper explores the principles that should be followed and related mea-sures in designing oral English activities in higher vocational public English audio-visual-oral classroom.

  8. Oral health care for children in countries using dental therapists in public, school-based programs, contrasted with that of the United States, using dentists in a private practice model.

    Science.gov (United States)

    Mathu-Muju, Kavita R; Friedman, Jay W; Nash, David A

    2013-09-01

    The United States faces a significant problem with access to oral health care, particularly for children. More than 50 countries have developed an alternative dental provider, a dental therapist, practicing in public, school-based programs, to address children's access to care. This delivery model has been demonstrated to improve access to care and oral health outcomes while providing quality care economically. We summarize elements of a recent major review of the global literature on the use of dental therapists, "A Review of the Global Literature on Dental Therapists: In the Context of the Movement to Add Dental Therapists to the Oral Health Workforce in the United States." We contrast the success of a school-based model of caring for children by dental therapists with that of the US model of dentists providing care for children in private practices.

  9. 9 CFR 315.1 - Carcasses and parts passed for cooking; rendering into lard or tallow.

    Science.gov (United States)

    2010-01-01

    ...; rendering into lard or tallow. 315.1 Section 315.1 Animals and Animal Products FOOD SAFETY AND INSPECTION... PARTS PASSED FOR COOKING § 315.1 Carcasses and parts passed for cooking; rendering into lard or tallow... subchapter or rendered into tallow, provided such rendering is done in the following manner: (a) When...

  10. Realistic Haptic Rendering of Interacting Deformable Objects in Virtual Environments

    CERN Document Server

    Duriez, Christian; Kheddar, Abderrahmane; Andriot, Claude

    2008-01-01

    A new computer haptics algorithm to be used in general interactive manipulations of deformable virtual objects is presented. In multimodal interactive simulations, haptic feedback computation often comes from contact forces. Subsequently, the fidelity of haptic rendering depends significantly on contact space modeling. Contact and friction laws between deformable models are often simplified in up to date methods. They do not allow a "realistic" rendering of the subtleties of contact space physical phenomena (such as slip and stick effects due to friction or mechanical coupling between contacts). In this paper, we use Signorini's contact law and Coulomb's friction law as a computer haptics basis. Real-time performance is made possible thanks to a linearization of the behavior in the contact space, formulated as the so-called Delassus operator, and iteratively solved by a Gauss-Seidel type algorithm. Dynamic deformation uses corotational global formulation to obtain the Delassus operator in which the mass and s...

  11. Hybrid fur rendering: combining volumetric fur with explicit hair strands

    DEFF Research Database (Denmark)

    Andersen, Tobias Grønbeck; Falster, Viggo; Frisvad, Jeppe Revall

    2016-01-01

    Hair is typically modeled and rendered using either explicitly defined hair strand geometry or a volume texture of hair densities. Taken each on their own, these two hair representations have difficulties in the case of animal fur as it consists of very dense and thin undercoat hairs in combination...... with coarse guard hairs. Explicit hair strand geometry is not well-suited for the undercoat hairs, while volume textures are not well-suited for the guard hairs. To efficiently model and render both guard hairs and undercoat hairs, we present a hybrid technique that combines rasterization of explicitly...... defined guard hairs with ray marching of a prismatic shell volume with dynamic resolution. The latter is the key to practical combination of the two techniques, and it also enables a high degree of detail in the undercoat. We demonstrate that our hybrid technique creates a more detailed and soft fur...

  12. Chromium Renderserver: scalable and open remote rendering infrastructure.

    Science.gov (United States)

    Paul, Brian; Ahern, Sean; Bethel, E Wes; Brugger, Eric; Cook, Rich; Daniel, Jamison; Lewis, Ken; Owen, Jens; Southard, Dale

    2008-01-01

    Chromium Renderserver (CRRS) is software infrastructure that provides the ability for one or more users to run and view image output from unmodified, interactive OpenGL and X11 applications on a remote, parallel computational platform equipped with graphics hardware accelerators via industry-standard Layer 7 network protocols and client viewers. The new contributions of this work include a solution to the problem of synchronizing X11 and OpenGL command streams, remote delivery of parallel hardware accelerated rendering, and a performance analysis of several different optimizations that are generally applicable to a variety of rendering architectures. CRRS is fully operational, Open Source software. imagery and sending it to a remote viewer.

  13. Hybrid fur rendering: combining volumetric fur with explicit hair strands

    DEFF Research Database (Denmark)

    Andersen, Tobias Grønbeck; Falster, Viggo; Frisvad, Jeppe Revall

    2016-01-01

    Hair is typically modeled and rendered using either explicitly defined hair strand geometry or a volume texture of hair densities. Taken each on their own, these two hair representations have difficulties in the case of animal fur as it consists of very dense and thin undercoat hairs in combination...... with coarse guard hairs. Explicit hair strand geometry is not well-suited for the undercoat hairs, while volume textures are not well-suited for the guard hairs. To efficiently model and render both guard hairs and undercoat hairs, we present a hybrid technique that combines rasterization of explicitly...... defined guard hairs with ray marching of a prismatic shell volume with dynamic resolution. The latter is the key to practical combination of the two techniques, and it also enables a high degree of detail in the undercoat. We demonstrate that our hybrid technique creates a more detailed and soft fur...

  14. Tactile display for virtual 3D shape rendering

    CERN Document Server

    Mansutti, Alessandro; Bordegoni, Monica; Cugini, Umberto

    2017-01-01

    This book describes a novel system for the simultaneous visual and tactile rendering of product shapes which allows designers to simultaneously touch and see new product shapes during the conceptual phase of product development. This system offers important advantages, including potential cost and time savings, compared with the standard product design process in which digital 3D models and physical prototypes are often repeatedly modified until an optimal design is achieved. The system consists of a tactile display that is able to represent, within a real environment, the shape of a product. Designers can explore the rendered surface by touching curves lying on the product shape, selecting those curves that can be considered style features and evaluating their aesthetic quality. In order to physically represent these selected curves, a flexible surface is modeled by means of servo-actuated modules controlling a physical deforming strip. The tactile display is designed so as to be portable, low cost, modular,...

  15. Binaural technology for e.g. rendering auditory virtual environments

    DEFF Research Database (Denmark)

    Hammershøi, Dorte

    2008-01-01

    , helped mediate the understanding that if the transfer functions could be mastered, then important dimensions of the auditory percept could also be controlled. He early understood the potential of using the HRTFs and numerical sound transmission analysis programs for rendering auditory virtual...... environments. Jens Blauert participated in many European cooperation projects exploring  this field (and others), among other the SCATIS project addressing the auditory-tactile dimensions in the absence of visual information....

  16. Haptic Rendering Techniques for Non-Physical, Command Decision Support

    Science.gov (United States)

    2004-04-01

    tactile and haptic rendering techniques. BACKGROUND Usually visualizing battlefield implies maps, computer screens filled with information and perhaps 3...Traditional 2-D Screens 3-D stereo glasses HMD CAVE Audio Haptics Level 1, 2 3 …..Fusion - Estimates INTEL SATELLITE RAW DATA Transforms...sensory modes of data presentation Haptics Tactile 8-14 Virtual Lexicon Haptic feedback The sensation of weight or resistance in a virtual world. (from

  17. Rendering Optical Effects Based on Spectra Representation in Complex Scenes

    OpenAIRE

    Dong, Weiming

    2006-01-01

    http://www.springerlink.com/; Rendering the structural color of natural objects or modern industrial products in the 3D environment is not possible with RGB-based graphics platforms and software and very time consuming, even with the most efficient spectra representation based methods previously proposed. Our framework allows computing full spectra light object interactions only when it is needed, i.e. for the part of the scene that requires simulating special spectra sensitive phenomena. Ach...

  18. Anisotropic 3D texture synthesis with application to volume rendering

    DEFF Research Database (Denmark)

    Laursen, Lasse Farnung; Ersbøll, Bjarne Kjær; Bærentzen, Jakob Andreas

    2011-01-01

    We present a novel approach to improving volume rendering by using synthesized textures in combination with a custom transfer function. First, we use existing knowledge to synthesize anisotropic solid textures to fit our volumetric data. As input to the synthesis method, we acquire high quality....... This method is applied to a high quality visualization of a pig carcass, where samples of meat, bone, and fat have been used to produce the anisotropic 3D textures....

  19. Capturing, processing, and rendering real-world scenes

    Science.gov (United States)

    Nyland, Lars S.; Lastra, Anselmo A.; McAllister, David K.; Popescu, Voicu; McCue, Chris; Fuchs, Henry

    2000-12-01

    While photographs vividly capture a scene from a single viewpoint, it is our goal to capture a scene in such a way that a viewer can freely move to any viewpoint, just as he or she would in an actual scene. We have built a prototype system to quickly digitize a scene using a laser rangefinder and a high-resolution digital camera that accurately captures a panorama of high-resolution range and color information. With real-world scenes, we have provided data to fuel research in many area, including representation, registration, data fusion, polygonization, rendering, simplification, and reillumination. The real-world scene data can be used for many purposes, including immersive environments, immersive training, re-engineering and engineering verification, renovation, crime-scene and accident capture and reconstruction, archaeology and historic preservation, sports and entertainment, surveillance, remote tourism and remote sales. We will describe our acquisition system, the necessary processing to merge data from the multiple input devices and positions. We will also describe high quality rendering using the data we have collected. Issues about specific rendering accelerators and algorithms will also be presented. We will conclude by describing future uses and methods of collection for real- world scene data.

  20. Real-time rendering of optical effects using spatial convolution

    Science.gov (United States)

    Rokita, Przemyslaw

    1998-03-01

    Simulation of special effects such as: defocus effect, depth-of-field effect, raindrops or water film falling on the windshield, may be very useful in visual simulators and in all computer graphics applications that need realistic images of outdoor scenery. Those effects are especially important in rendering poor visibility conditions in flight and driving simulators, but can also be applied, for example, in composing computer graphics and video sequences- -i.e. in Augmented Reality systems. This paper proposes a new approach to the rendering of those optical effects by iterative adaptive filtering using spatial convolution. The advantage of this solution is that the adaptive convolution can be done in real-time by existing hardware. Optical effects mentioned above can be introduced into the image computed using conventional camera model by applying to the intensity of each pixel the convolution filter having an appropriate point spread function. The algorithms described in this paper can be easily implemented int the visualization pipeline--the final effect may be obtained by iterative filtering using a single hardware convolution filter or with the pipeline composed of identical 3 X 3 filters placed as the stages of this pipeline. Another advantage of the proposed solution is that the extension based on proposed algorithm can be added to the existing rendering systems as a final stage of the visualization pipeline.

  1. High Performance GPU-Based Fourier Volume Rendering.

    Science.gov (United States)

    Abdellah, Marwan; Eldeib, Ayman; Sharawi, Amr

    2015-01-01

    Fourier volume rendering (FVR) is a significant visualization technique that has been used widely in digital radiography. As a result of its (N (2)log⁡N) time complexity, it provides a faster alternative to spatial domain volume rendering algorithms that are (N (3)) computationally complex. Relying on the Fourier projection-slice theorem, this technique operates on the spectral representation of a 3D volume instead of processing its spatial representation to generate attenuation-only projections that look like X-ray radiographs. Due to the rapid evolution of its underlying architecture, the graphics processing unit (GPU) became an attractive competent platform that can deliver giant computational raw power compared to the central processing unit (CPU) on a per-dollar-basis. The introduction of the compute unified device architecture (CUDA) technology enables embarrassingly-parallel algorithms to run efficiently on CUDA-capable GPU architectures. In this work, a high performance GPU-accelerated implementation of the FVR pipeline on CUDA-enabled GPUs is presented. This proposed implementation can achieve a speed-up of 117x compared to a single-threaded hybrid implementation that uses the CPU and GPU together by taking advantage of executing the rendering pipeline entirely on recent GPU architectures.

  2. High Performance GPU-Based Fourier Volume Rendering

    Directory of Open Access Journals (Sweden)

    Marwan Abdellah

    2015-01-01

    Full Text Available Fourier volume rendering (FVR is a significant visualization technique that has been used widely in digital radiography. As a result of its O(N2log⁡N time complexity, it provides a faster alternative to spatial domain volume rendering algorithms that are O(N3 computationally complex. Relying on the Fourier projection-slice theorem, this technique operates on the spectral representation of a 3D volume instead of processing its spatial representation to generate attenuation-only projections that look like X-ray radiographs. Due to the rapid evolution of its underlying architecture, the graphics processing unit (GPU became an attractive competent platform that can deliver giant computational raw power compared to the central processing unit (CPU on a per-dollar-basis. The introduction of the compute unified device architecture (CUDA technology enables embarrassingly-parallel algorithms to run efficiently on CUDA-capable GPU architectures. In this work, a high performance GPU-accelerated implementation of the FVR pipeline on CUDA-enabled GPUs is presented. This proposed implementation can achieve a speed-up of 117x compared to a single-threaded hybrid implementation that uses the CPU and GPU together by taking advantage of executing the rendering pipeline entirely on recent GPU architectures.

  3. High dynamic range (HDR) virtual bronchoscopy rendering for video tracking

    Science.gov (United States)

    Popa, Teo; Choi, Jae

    2007-03-01

    In this paper, we present the design and implementation of a new rendering method based on high dynamic range (HDR) lighting and exposure control. This rendering method is applied to create video images for a 3D virtual bronchoscopy system. One of the main optical parameters of a bronchoscope's camera is the sensor exposure. The exposure adjustment is needed since the dynamic range of most digital video cameras is narrower than the high dynamic range of real scenes. The dynamic range of a camera is defined as the ratio of the brightest point of an image to the darkest point of the same image where details are present. In a video camera exposure is controlled by shutter speed and the lens aperture. To create the virtual bronchoscopic images, we first rendered a raw image in absolute units (luminance); then, we simulated exposure by mapping the computed values to the values appropriate for video-acquired images using a tone mapping operator. We generated several images with HDR and others with low dynamic range (LDR), and then compared their quality by applying them to a 2D/3D video-based tracking system. We conclude that images with HDR are closer to real bronchoscopy images than those with LDR, and thus, that HDR lighting can improve the accuracy of image-based tracking.

  4. Oral Medication

    Science.gov (United States)

    ... Size: A A A Listen En Español Oral Medication The first treatment for type 2 diabetes blood ... new — even over-the-counter items. Explore: Oral Medication How Much Do Oral Medications Cost? Save money ...

  5. Partition of biocides between water and inorganic phases of renders with organic binder

    DEFF Research Database (Denmark)

    Urbanczyk, Michal M; Bollmann, Ulla E; Bester, Kai

    2016-01-01

    , the partition of biocides between water and inorganic phases of render with organic binder was investigated. The partition constants of carbendazim, diuron, iodocarb, isoproturon, cybutryn (irgarol), octylisothiazolinone, terbutryn, and tebuconazole towards minerals typically used in renders, e.g. barite...... with render-water distribution constants of two artificially made renders showed that the distribution constants can be estimated based on partition constants of compounds for individual components of the render....

  6. Oral myiasis

    OpenAIRE

    Thalaimalai Saravanan; Mathan A Mohan; Meera Thinakaran; Saneem Ahammed

    2015-01-01

    Myiasis is a pathologic condition in humans occurring because of parasitic infestation. Parasites causing myiasis belong to the order Diptera. Oral myiasis is seen secondary to oral wounds, suppurative lesions, and extraction wounds, especially in individuals with neurological deficit. In such cases, neglected oral hygiene and halitosis attracts the flies to lay eggs in oral wounds resulting in oral myiasis. We present a case of oral myiasis in 40-year-old male patient with mental disability ...

  7. A ortodontia nas políticas públicas de saúde bucal: um exemplo de eqüidade na Universidade Federal de Juiz de Fora Orthodontics in oral public health policies: an example of equity in Juiz de Fora Federal University

    Directory of Open Access Journals (Sweden)

    Sérgio Murta Maciel

    2006-07-01

    Full Text Available Devido à grande prevalência das más-oclusões, à grande transformação epidemiológica por que passa a saúde bucal, com o forte declínio das cáries, e sob a referência dos princípios constitucionais de integralidade e eqüidade, tornou-se necessário viabilizar a incorporação de procedimentos ortodônticos pelo setor público de saúde. Uma das sugestões neste sentido seria a utilização dos serviços prestados nas universidades públicas, que além de formar recursos humanos, podem abrir espaço para uma política social paralela. Este artigo apresenta o exemplo da clínica de ortodontia da Universidade Federal de Juiz de Fora, que, por ser um pólo de referência regional em atenção à saúde bucal, vem participando das ações públicas de saúde bucal, através dos serviços prestados à população. Expõe as diferentes faces das más-oclusões dentárias, que afetam as pessoas nos âmbitos social, psicológico e biológico, e faz uma leitura histórica da saúde bucal no Brasil com um recorte para a assistência ortodôntica, que, por real importância e por direitos constitucionais, deveria figurar entre os procedimentos cobertos pelo SUS. Idealiza-se um sistema de triagem para esses casos, abrangendo critérios econômico, biológico e psiscossocial, que aproxime a assistência à saúde bucal da eqüidade.Due to the great prevalence of malocclusions; to the great epidemic transformation of oral health, with the decreased number of decays, and based on the principles of the Brazilian Constitution of integrality and equity, it became necessary to incorporate orthodontics procedures in public health care. In this sense, one suggestion would be the use of services offered by public universities, which, besides forming human resources, give rise to parallel social policies. This paper shows the example of the Juiz de Fora Federal University's orthodontic clinic, a regional reference pole in oral health, and the role it plays

  8. Clinical and Histologic Features Compared with AgNOR Count in Oral Leukoplakia, Erosive Lichen Planus, Oral Submucous Fibrosis and Oral Squamous Cell Carcinoma

    Directory of Open Access Journals (Sweden)

    Sarbjeet Singh

    2006-01-01

    The aim of the study was to correlate and compare AgNOR count in speckled leukoplakia, oral lichen planus, oral submucous fibrosis and in oral squamous cell carcinoma and to assess if AgNOR count could contribute to the pre-therapeutic assessment of the biologic aggressiveness of the disease and to detect malignant potential of premalignant lesion and conditions which could render us to assess the prognosis of the disease.

  9. Oral Carcinogenesis and Oral Cancer Chemoprevention: A Review

    Directory of Open Access Journals (Sweden)

    Takuji Tanaka

    2011-01-01

    Full Text Available Oral cancer is one of the major global threats to public health. The development of oral cancer is a tobacco-related multistep and multifocal process involving field cancerization and carcinogenesis. The rationale for molecular-targeted prevention of oral cancer is promising. Biomarkers of genomic instability, including aneuploidy and allelic imbalance, are possible to measure the cancer risk of oral premalignancies. Understanding of the biology of oral carcinogenesis will yield important advances for detecting high-risk patients, monitoring preventive interventions, and assessing cancer risk and pharmacogenomics. In addition, novel chemopreventive agents based on molecular mechanisms and targets against oral cancers will be derived from studies using appropriate animal carcinogenesis models. New approaches, such as molecular-targeted agents and agent combinations in high-risk oral individuals, are undoubtedly needed to reduce the devastating worldwide consequences of oral malignancy.

  10. Wet scrubber analysis of volatile organic compound removal in the rendering industry.

    Science.gov (United States)

    Kastner, James R; Das, K C

    2002-04-01

    The promulgation of odor control rules, increasing public concerns, and U.S. Environmental Protection Agency (EPA) air regulations in nonattainment zones necessitates the remediation of a wide range of volatile organic compounds (VOCs) generated by the rendering industry. Currently, wet scrubbers with oxidizing chemicals are used to treat VOCs; however, little information is available on scrubber efficiency for many of the VOCs generated within the rendering process. Portable gas chromatography/mass spectrometry (GC/MS) units were used to rapidly identify key VOCs on-site in process streams at two poultry byproduct rendering plants. On-site analysis was found to be important, given the significant reduction in peak areas if samples were held for 24 hr before analysis. Major compounds consistently identified in the emissions from the plant included dimethyl disulfide, methanethiol, octane, hexanal, 2-methylbutanal, and 3-methylbutanal. The two branched aldehydes, 2-methylbutanal and 3-methylbutanal, were by far the most consistent, appearing in every sample and typically the largest fraction of the VOC mixture. A chlorinated hydrocarbon, methanesulfonyl chloride, was identified in the outlet of a high-intensity wet scrubber, and several VOCs and chlorinated compounds were identified in the scrubbing solution, but not on a consistent basis. Total VOC concentrations in noncondensable gas streams ranged from 4 to 91 ppmv. At the two plants, the odor-causing compound methanethiol ranged from 25 to 33% and 9.6% of the total VOCs (v/v). In one plant, wet scrubber analysis using chlorine dioxide (ClO2) as the oxidizing agent indicated that close to 100% of the methanethiol was removed from the gas phase, but removal efficiencies ranged from 20 to 80% for the aldehydes and hydrocarbons and from 23 to 64% for total VOCs. In the second plant, conversion efficiencies were much lower in a packed-bed wet scrubber, with a measurable removal of only dimethyl sulfide (20-100%).

  11. A survey on hair modeling: styling, simulation, and rendering.

    Science.gov (United States)

    Ward, Kelly; Bertails, Florence; Kim, Tae-Yong; Marschner, Stephen R; Cani, Marie-Paule; Lin, Ming C

    2007-01-01

    Realistic hair modeling is a fundamental part of creating virtual humans in computer graphics. This paper surveys the state of the art in the major topics of hair modeling: hairstyling, hair simulation, and hair rendering. Because of the difficult, often unsolved problems that arise in all these areas, a broad diversity of approaches are used, each with strengths that make it appropriate for particular applications. We discuss each of these major topics in turn, presenting the unique challenges facing each area and describing solutions that have been presented over the years to handle these complex issues. Finally, we outline some of the remaining computational challenges in hair modeling.

  12. Interactive View-Dependent Rendering of Large Isosurfaces

    Energy Technology Data Exchange (ETDEWEB)

    Gregorski, B; Duchaineau, M; Lindstrom, P; Pascucci, V; Joy, K I

    2002-11-19

    We present an algorithm for interactively extracting and rendering isosurfaces of large volume datasets in a view-dependent fashion. A recursive tetrahedral mesh refinement scheme, based on longest edge bisection, is used to hierarchically decompose the data into a multiresolution structure. This data structure allows fast extraction of arbitrary isosurfaces to within user specified view-dependent error bounds. A data layout scheme based on hierarchical space filling curves provides access to the data in a cache coherent manner that follows the data access pattern indicated by the mesh refinement.

  13. Software System for Vocal Rendering of Printed Documents

    Directory of Open Access Journals (Sweden)

    Marian DARDALA

    2008-01-01

    Full Text Available The objective of this paper is to present a software system architecture developed to render the printed documents in a vocal form. On the other hand, in the paper are described the software solutions that exist as software components and are necessary for documents processing as well as for multimedia device controlling used by the system. The usefulness of this system is for people with visual disabilities that can access the contents of documents without that they be printed in Braille system or to exist in an audio form.

  14. An example of quantum imaging: rendering an object undetectable

    CERN Document Server

    Ataman, Stefan

    2016-01-01

    In this paper we propose and analyse a Gedankenexperiment involving three non-linear crystals and two objects inserted in the idler beams. We show that, besides the behaviour that can be extrapolated from previous experiments involving two crystals and one object, we are able to predict a new effect: under certain circumstances, one of the objects can be rendered undetectable to any single detection rate on the signal photons with discarded idler photons. This effect could find applications in future developments of quantum imaging techniques.

  15. An example of quantum imaging: rendering an object undetectable

    Science.gov (United States)

    Ataman, Stefan

    2016-06-01

    In this paper we propose and analyse a Gedankenexperiment involving three non-linear crystals and two objects inserted in the idler beams. We show that, besides the behaviour that can be extrapolated from previous experiments involving two crystals and one object, we are able to predict a new effect: under certain circumstances, one of the objects can be rendered undetectable to any single detection rate on the signal photons with discarded idler photons. This effect could find applications in future developments of quantum imaging techniques.

  16. Horse-shoe lung-rediscovered via volume rendered images

    Directory of Open Access Journals (Sweden)

    Alpa Bharati

    2013-01-01

    Full Text Available Horseshoe lung, usually associated with pulmonary venolobar syndrome, is a rare congenital anomaly involving the fusion of the postero-basal segments of the right and left lungs across the midline. The fused segment or the isthmus lies posterior to the pericardium and anterior to the aorta.The associated pulmonary venolobar syndrome involves anomalous systemic arterial supply and anomlaous systemic venous drainage of the right lung. With the advent of MDCT imaging, we can diagnose this rare condition as well all its associated anomalies non-invasively. Volume-rendered techniques greatly simplify the complex anatomy and provide easy understanding of the same.

  17. Partitioning of biocides between water and inorganic phases of render

    DEFF Research Database (Denmark)

    Urbanczyk, Michal; Bollmann, Ulla E.; Bester, Kai

    The use of biocides as additives for building materials has gained importance in recent years. These biocides are, e.g., applied to renders and paints to prevent them from microbial spoilage. However, these biocides can leach out into the environment. In order to better understand this leaching...... compared. The partitioning constants for calcium carbonate varied between 0.1 (isoproturon) and 1.1 (iodocarb) and 84.6 (dichlorooctylisothiazolinone), respectively. The results for barite, kaolinite and mica were in a similar range and usually the compounds with high partitioning constants for one mineral...

  18. Practical rendering and computation with Direct3D 11

    CERN Document Server

    Zink, Jason; Hoxley, Jack

    2011-01-01

    Practical Rendering and Computation with Direct3D 11 packs in documentation and in-depth coverage of basic and high-level concepts related to using Direct 3D 11 and is a top pick for any serious programming collection. … perfect for a wide range of users. Any interested in computation and multicore models will find this packed with examples and technical applications.-Midwest Book Review, October 2011The authors have generously provided us with an optimal blend of concepts and philosophy, illustrative figures to clarify the more difficult points, and source code fragments to make the ideas con

  19. Oral health policies in Brazil

    Directory of Open Access Journals (Sweden)

    Gilberto Alfredo Pucca Junior

    2009-06-01

    Full Text Available Since Oral Health policies in Brazil have been constructed according to circumstances and possibilities, they should be understood within a given context. The present analysis contextualizes several issues of the Brazilian Oral Health Policy, called "Smiling Brazil", and describes its present stage of development. Today it involves re-organizing basic oral health care by deploying Oral Health Teams within the Family Health strategy, setting up Centers of Dental Specialists within an Oral Health network as a secondary care measure, setting up Regional Laboratories of Dental Prosthesis and a more extensive fluoridation of the public water supply.

  20. Cost-effectiveness study of oral hypoglycemic agents in the treatment of outpatients with type 2 diabetes attending a public primary care clinic in Mexico City

    Directory of Open Access Journals (Sweden)

    Cárdenas-Elizalde MR

    2012-03-01

    Full Text Available Christian Díaz de León-Castañeda, Marina Altagracia-Martínez, Jaime Kravzov-Jinich, Ma del Rosario Cárdenas-Elizalde, Consuelo Moreno-Bonett, Juan Manuel Martínez-NúñezDepartment of Biological Systems and Health Care, Biological and Health Sciences Division, Universidad Autónoma Metropolitana-Xochimilco, Mexico DF, MexicoIntroduction: Worldwide, diabetes mellitus presents a high burden for individuals and society. In Latin America, many people with diabetes have limited access to health care, which means that indirect costs may exceed direct health care cost. Diabetes is Mexico's leading cause of death.Purpose: To evaluate the cost-effectiveness ratios of the most used oral hypoglycemic agents (OHA in the treatment of outpatients with type 2 diabetes attending a public primary care clinic in Mexico City.Design: A cross-sectional and analytic study was conducted in Mexico City.Methodology: Twenty-seven adult outpatients with type 2 diabetes who were treated either with metformin or glibenclamide were included. Acarbose was used as an alternative strategy. The study was carried out from the perspective of Mexican society. Direct medical and nonmedical costs as well as indirect costs were evaluated using a structured questionnaire. Efficacies of all drug treatments were evaluated retrospectively. A systematic search was conducted to select published randomized clinical trials based on predetermined inclusion criteria, and treatment success was defined as glycosylated hemoglobin factor ≤ 7%. Efficacy data of each drug and/or combination were analyzed using meta-analysis. The Monte Carlo Markov model was used. Quality-adjusted life-years (QALY were used as the unit of effectiveness; incremental and sensitive analyses were performed and a 5% discount rate was calculated. A hypothetical cohort of 10,000 patients was modeled.Results: The odds ratios of the success of each drug treatment were obtained from the meta-analyses, and were the

  1. Cost-effectiveness study of oral hypoglycemic agents in the treatment of outpatients with type 2 diabetes attending a public primary care clinic in Mexico City

    Science.gov (United States)

    de León-Castañeda, Christian Díaz; Altagracia-Martínez, Marina; Kravzov-Jinich, Jaime; Cárdenas-Elizalde, Ma del Rosario; Moreno-Bonett, Consuelo; Martínez-Núñez, Juan Manuel

    2012-01-01

    Introduction Worldwide, diabetes mellitus presents a high burden for individuals and society. In Latin America, many people with diabetes have limited access to health care, which means that indirect costs may exceed direct health care cost. Diabetes is Mexico’s leading cause of death. Purpose To evaluate the cost-effectiveness ratios of the most used oral hypoglycemic agents (OHA) in the treatment of outpatients with type 2 diabetes attending a public primary care clinic in Mexico City. Design A cross-sectional and analytic study was conducted in Mexico City. Methodology Twenty-seven adult outpatients with type 2 diabetes who were treated either with metformin or glibenclamide were included. Acarbose was used as an alternative strategy. The study was carried out from the perspective of Mexican society. Direct medical and nonmedical costs as well as indirect costs were evaluated using a structured questionnaire. Efficacies of all drug treatments were evaluated retrospectively. A systematic search was conducted to select published randomized clinical trials based on predetermined inclusion criteria, and treatment success was defined as glycosylated hemoglobin factor ≤ 7%. Efficacy data of each drug and/or combination were analyzed using meta-analysis. The Monte Carlo Markov model was used. Quality-adjusted life-years (QALY) were used as the unit of effectiveness; incremental and sensitive analyses were performed and a 5% discount rate was calculated. A hypothetical cohort of 10,000 patients was modeled. Results The odds ratios of the success of each drug treatment were obtained from the meta-analyses, and were the following: 5.82 (glibenclamide), 3.86 (metformin), 3.5 (acarbose), and 6.76 (metformin–glibenclamide). The cost-effectiveness ratios found were US$272.63/QALY (glibenclamide), US$296.48/QALY (metformin), and US$409.86/QALY (acarbose). Sensitivity analysis did not show changes for the most cost-effective therapy when the effectiveness probabilities or

  2. Busting the Baby Teeth Myth and Increasing Children’s Consumption of Tap Water: Building Public Will for Children’s Oral Health in Colorado

    Directory of Open Access Journals (Sweden)

    Wyatt C. Hornsby

    2017-09-01

    Full Text Available QuestionCan a multifaceted statewide communications campaign motivate behavior change in low-income Colorado families to limit children’s fruit juice consumption and increase children’s consumption of tap water to prevent tooth decay?PurposeCaries is the most common chronic disease of childhood, affecting 40% of kindergartners and 55% of third graders in Colorado. Frequent consumption of 100% fruit juice is linked to childhood caries. The purpose of this campaign, “Cavities Get Around,” was to motivate families to limit children’s fruit juice consumption and increase consumption of tap water to protect baby teeth from caries, while also building public will for children’s oral health.MethodsThe campaign included targeted media, promotores/organizers, and family education. We focused on fruit juice because audience research showed many families view fruit juice as healthy, and it is also a common beverage among young children up to age of 6 years. We also focused on low-socioeconomic status families because data show higher childhood tooth decay rates in this population. To evaluate progress, we conducted identical pre- and post-surveys, each of 600 random low-income parents contacted by landline, mobile telephone, and Internet, allowing for comparative data.ResultsSignificant progress was achieved compared to 2014 baseline results. Findings from a November 2015 statewide survey of parents included the following: (1 22-point increase from 2014 in percentage of children regularly drinking tap water (from 41 to 63%. (2 29-point decrease from 2014 in percentage of respondents who considered fruit juice consumption important to their child’s health and nutritional needs (from 72 to 43%. (3 19-point reduction in fruit juice consumption among young children (from 66% in 2014 to 47% in 2015. (4 6-point reduction in percentage of parents considering baby teeth “less important” than adult teeth (from 21% in 2014 to 15% in 2015. The

  3. High resolution renderings and interactive visualization of the 2006 Huntington Beach experiment

    Science.gov (United States)

    Im, T.; Nayak, A.; Keen, C.; Samilo, D.; Matthews, J.

    2006-12-01

    The Visualization Center at the Scripps Institution of Oceanography investigates innovative ways to represent graphically interactive 3D virtual landscapes and to produce high resolution, high quality renderings of Earth sciences data and the sensors and instruments used to collect the data . Among the Visualization Center's most recent work is the visualization of the Huntington Beach experiment, a study launched in July 2006 by the Southern California Ocean Observing System (http://www.sccoos.org/) to record and synthesize data of the Huntington Beach coastal region. Researchers and students at the Visualization Center created visual presentations that combine bathymetric data provided by SCCOOS with USGS aerial photography and with 3D polygonal models of sensors created in Maya into an interactive 3D scene using the Fledermaus suite of visualization tools (http://www.ivs3d.com). In addition, the Visualization Center has produced high definition (HD) animations of SCCOOS sensor instruments (e.g. REMUS, drifters, spray glider, nearshore mooring, OCSD/USGS mooring and CDIP mooring) using the Maya modeling and animation software and rendered over multiple nodes of the OptIPuter Visualization Cluster at Scripps. These visualizations are aimed at providing researchers with a broader context of sensor locations relative to geologic characteristics, to promote their use as an educational resource for informal education settings and increasing public awareness, and also as an aid for researchers' proposals and presentations. These visualizations are available for download on the Visualization Center website at http://siovizcenter.ucsd.edu/sccoos/hb2006.php.

  4. Sparse PDF Volumes for Consistent Multi-Resolution Volume Rendering

    KAUST Repository

    Sicat, Ronell Barrera

    2014-12-31

    This paper presents a new multi-resolution volume representation called sparse pdf volumes, which enables consistent multi-resolution volume rendering based on probability density functions (pdfs) of voxel neighborhoods. These pdfs are defined in the 4D domain jointly comprising the 3D volume and its 1D intensity range. Crucially, the computation of sparse pdf volumes exploits data coherence in 4D, resulting in a sparse representation with surprisingly low storage requirements. At run time, we dynamically apply transfer functions to the pdfs using simple and fast convolutions. Whereas standard low-pass filtering and down-sampling incur visible differences between resolution levels, the use of pdfs facilitates consistent results independent of the resolution level used. We describe the efficient out-of-core computation of large-scale sparse pdf volumes, using a novel iterative simplification procedure of a mixture of 4D Gaussians. Finally, our data structure is optimized to facilitate interactive multi-resolution volume rendering on GPUs.

  5. Sparse PDF Volumes for Consistent Multi-Resolution Volume Rendering.

    Science.gov (United States)

    Sicat, Ronell; Krüger, Jens; Möller, Torsten; Hadwiger, Markus

    2014-12-01

    This paper presents a new multi-resolution volume representation called sparse pdf volumes, which enables consistent multi-resolution volume rendering based on probability density functions (pdfs) of voxel neighborhoods. These pdfs are defined in the 4D domain jointly comprising the 3D volume and its 1D intensity range. Crucially, the computation of sparse pdf volumes exploits data coherence in 4D, resulting in a sparse representation with surprisingly low storage requirements. At run time, we dynamically apply transfer functions to the pdfs using simple and fast convolutions. Whereas standard low-pass filtering and down-sampling incur visible differences between resolution levels, the use of pdfs facilitates consistent results independent of the resolution level used. We describe the efficient out-of-core computation of large-scale sparse pdf volumes, using a novel iterative simplification procedure of a mixture of 4D Gaussians. Finally, our data structure is optimized to facilitate interactive multi-resolution volume rendering on GPUs.

  6. Fast polyhedral cell sorting for interactive rendering of unstructured grids

    Energy Technology Data Exchange (ETDEWEB)

    Combra, J; Klosowski, J T; Max, N; Silva, C T; Williams, P L

    1998-10-30

    Direct volume rendering based on projective methods works by projecting, in visibility order, the polyhedral cells of a mesh onto the image plane, and incrementally compositing the cell's color and opacity into the final image. Crucial to this method is the computation of a visibility ordering of the cells. If the mesh is ''well-behaved'' (acyclic and convex), then the MPVO method of Williams provides a very fast sorting algorithm; however, this method only computes an approximate ordering in general datasets, resulting in visual artifacts when rendered. A recent method of Silva et al. removed the assumption that the mesh is convex, by means of a sweep algorithm used in conjunction with the MPVO method; their algorithm is substantially faster than previous exact methods for general meshes. In this paper we propose a new technique, which we call BSP-XMPVO, which is based on a fast and simple way of using binary space partitions on the boundary elements of the mesh to augment the ordering produced by MPVO. Our results are shown to be orders of magnitude better than previous exact methods of sorting cells.

  7. Non-Photorealistic Rendering in Chinese Painting of Animals

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A set of algorithms is proposed in this paper to automatically transform 3D animal models to Chinese painting style. Inspired by real painting process in Chinese painting of animals, we divide the whole rendering process into two parts: borderline stroke making and interior shading. In borderline stroke making process we first find 3D model silhouettes in real-time depending on the viewing direction of a user. After retrieving silhouette information from all model edges, a stroke linking mechanism is applied to link these independent edges into a long stroke. Finally we grow a plain thin silhouette line to a stylus stroke with various widths at each control point and a 2D brush model is combined with it to simulate a Chinese painting stroke. In the interior shading pipeline, three stages are used to convert a Gouraud-shading image to a Chinese painting style image: color quantization, ink diffusion and box filtering. The color quantization stage assigns all pixels in an image into four color levels and each level represents a color layer in a Chinese painting. Ink diffusion stage is used to transfer inks and water between different levels and to grow areas in an irregular way. The box filtering stage blurs sharp borders between different levels to embellish the appearance of final interior shading image. In addition to automatic rendering, an interactive Chinese painting system which is equipped with friendly input devices can be also combined to generate more artistic Chinese painting images manually.

  8. Protein and mineral characterisation of rendered meat and bone meal.

    Science.gov (United States)

    Buckley, M; Penkman, K E H; Wess, T J; Reaney, S; Collins, M J

    2012-10-01

    We report the characterisation of meat and bone meal (MBM) standards (Set B-EFPRA) derived from cattle, sheep, pig and chicken, each rendered at four different temperatures (133, 137, 141 and 145 °C). The standards, prepared for an EU programme STRATFEED (to develop new methodologies for the detection and quantification of illegal addition of mammalian tissues in feeding stuffs), have been widely circulated and used to assess a range of methods for identification of the species composition of MBM. The overall state of mineral alteration and protein preservation as a function of temperature was monitored using small angle X-ray diffraction (SAXS), amino acid composition and racemization analyses. Progressive increases in protein damage and mineral alteration in chicken and cattle standards was observed. In the case of sheep and pig, there was greater damage to the proteins and alteration of the minerals at the lowest treatment temperature (133 °C), suggesting that the thermal treatments must have been compromised in some way. This problem has probably impacted upon the numerous studies which tested methods against these heat treatments. We use protein mass spectrometric methods to explore if thermostable proteins could be used to identify rendered MBM. In more thermally altered samples, so-called 'thermostable' proteins such as osteocalcin which has been proposed as a ideal target to speciate MBM were no longer detectable, but the structural protein type I collagen could be used to differentiate all four species, even in the most thermally altered samples.

  9. Oral myiasis

    Directory of Open Access Journals (Sweden)

    Thalaimalai Saravanan

    2015-01-01

    Full Text Available Myiasis is a pathologic condition in humans occurring because of parasitic infestation. Parasites causing myiasis belong to the order Diptera. Oral myiasis is seen secondary to oral wounds, suppurative lesions, and extraction wounds, especially in individuals with neurological deficit. In such cases, neglected oral hygiene and halitosis attracts the flies to lay eggs in oral wounds resulting in oral myiasis. We present a case of oral myiasis in 40-year-old male patient with mental disability and history of epilepsy.

  10. Excellent color rendering indexes of multi-package white LEDs.

    Science.gov (United States)

    Oh, Ji Hye; Yang, Su Ji; Sung, Yeon-Goog; Do, Y R

    2012-08-27

    This study introduces multi-package white light-emitting diodes (LEDs) system with the ability to realize high luminous efficacy and an excellent color rendering index (CRI, R a) using the R B,M A B,M G B,M C B (R B,M A B,M G B,M denoted as a long-pass dichroic filter (LPDF)-capped, monochromatic red, amber and green phosphor converted-LED (pc-LED) pumped by a blue LED chip, and C B denoted as a cyan and blue mixed pc-LED pumped by a blue LED) system. The luminous efficacy and color rendering index (CRI) of multi-package white LED systems are compared while changing the concentration of the cyan phosphor used in the paste of a cyan-blue LED package and the driving current of individual LEDs in multi-package white LEDs at correlated color temperatures (CCTs) ranging from 6,500 K (cold white) to 2,700 K (warm white) using a set of eight CCTs as specified by the American National Standards Institute (ANSI) standard number C78.377-2008. A R B,M A B,M G B,M C B white LED system provides high luminous efficacy (≥ 96 lm/W) and a color rendering index (≥ 91) encompassing the complete CCT range. We also compare the optical properties of the R B,M A B,M G B,M C B system with those of the R B,M A B,M G B,M B and RAGB (red, amber, green, and blue semiconductor-type narrow-spectrum-band LEDs) systems. It can be expected that the cyan color added to a blue LED in multi-package white LEDs based on LPDF-capped, phosphor-converted monochromatic LEDs will meet the needs of the high-quality, highly efficient, full-color white LED lighting market in the near future.

  11. 9 CFR 319.703 - Rendered animal fat or mixture thereof.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Rendered animal fat or mixture thereof... INSPECTION AND CERTIFICATION DEFINITIONS AND STANDARDS OF IDENTITY OR COMPOSITION Fats, Oils, Shortenings § 319.703 Rendered animal fat or mixture thereof. “Rendered Animal Fat,” or any mixture of...

  12. 42 CFR 8.27 - Opportunity for oral presentation.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Opportunity for oral presentation. 8.27 Section 8... Opportunity for oral presentation. (a) Electing oral presentation. If an opportunity for an oral presentation... the decisionmaking process will be substantially aided by oral presentations and arguments....

  13. Efficient Unbiased Rendering using Enlightened Local Path Sampling

    DEFF Research Database (Denmark)

    Kristensen, Anders Wang

    . The downside to using these algorithms is that they can be slow to converge. Due to the nature of Monte Carlo methods, the results are random variables subject to variance. This manifests itself as noise in the images, which can only be reduced by generating more samples. The reason these methods are slow...... is because of a lack of eeffective methods of importance sampling. Most global illumination algorithms are based on local path sampling, which is essentially a recipe for constructing random walks. Using this procedure paths are built based on information given explicitly as part of scene description......, such as the location of the light sources or cameras, or the re flection models at each point. In this work we explore new methods of importance sampling paths. Our idea is to analyze the scene before rendering and compute various statistics that we use to improve importance sampling. The first of these are adjoint...

  14. Real-time Flame Rendering with GPU and CUDA

    Directory of Open Access Journals (Sweden)

    Wei Wei

    2011-02-01

    Full Text Available This paper proposes a method of flame simulation based on Lagrange process and chemical composition, which was non-grid and the problems associated with there grids were overcome. The turbulence movement of flame was described by Lagrange process and chemical composition was added into flame simulation which increased the authenticity of flame. For real-time applications, this paper simplified the EMST model. GPU-based particle system combined with OpenGL VBO and PBO unique technology was used to accelerate finally, the speed of vertex and pixel data interaction between CPU and GPU increased two orders of magnitude, frame rate of rendering increased by 30%, which achieved fast dynamic flame real-time simulation. For further real-time applications, this paper presented a strategy to implement flame simulation with CUDA on GPU, which achieved a speed up to 2.5 times the previous implementation.

  15. Latency in Distributed Acquisition and Rendering for Telepresence Systems.

    Science.gov (United States)

    Ohl, Stephan; Willert, Malte; Staadt, Oliver

    2015-12-01

    Telepresence systems use 3D techniques to create a more natural human-centered communication over long distances. This work concentrates on the analysis of latency in telepresence systems where acquisition and rendering are distributed. Keeping latency low is important to immerse users in the virtual environment. To better understand latency problems and to identify the source of such latency, we focus on the decomposition of system latency into sub-latencies. We contribute a model of latency and show how it can be used to estimate latencies in a complex telepresence dataflow network. To compare the estimates with real latencies in our prototype, we modify two common latency measurement methods. This presented methodology enables the developer to optimize the design, find implementation issues and gain deeper knowledge about specific sources of latency.

  16. Epidemiologia do câncer de boca em laboratório público do Estado de Mato Grosso, Brasil Oral cancer epidemiology in a public laboratory in Mato Grosso State, Brazil

    Directory of Open Access Journals (Sweden)

    Fabiano Tonaco Borges

    2008-09-01

    Full Text Available O objetivo deste trabalho foi analisar a epidemiologia do câncer de boca, dos casos diagnosticados pelo laboratório público do Estado de Mato Grosso, Brasil, após a instituição da política de atenção às doenças da boca e da face do estado. Trata-se de um estudo epidemiológico transversal. O objeto estudado foi o laudo histopatológico, pesquisando-se um total de 1.324 laudos emitidos entre janeiro de 2005 e dezembro 2006. Verificaram-se os casos de câncer de boca, o seu percentual em relação ao universo das lesões bucais e as seguintes variáveis: tipo histológico, sexo, idade e procedência dos pacientes (capital ou do interior. Após a análise dos dados verificaram-se 44 lesões de câncer de boca, representando 3% dos diagnósticos. O tipo histológico mais incidente foi o carcinoma epidermóide. A maioria dos diagnósticos foi referente aos homens na 5ª e 6ª décadas de vida residentes no interior do estado. Conclui-se com este estudo que em dois anos de funcionamento o serviço público de patologia bucal registrou um considerável número de casos de câncer de boca.This study analyzed oral cancer epidemiology based on histopathology reports from a public laboratory in Mato Grosso, Brazil, after a specific policy was implemented for treating oral and facial diseases in the State. This was a cross-sectional epidemiological study, based on 1,324 histopathology reports issued from January 2005 to December 2006. The study identified 44 cases of oral cancer, or 3% of all oral lesions, and analyzed them in relation to the following variables: histological type, gender, age, and patient's place of residence (capital versus rest of State. The most common histological type was squamous cell carcinoma. Most of the diagnoses occurred in men in their 50s and 60s living in the interior of the State. During two years in operation, this public oral pathology service had recorded a considerable number of oral cancer cases.

  17. Distributed Dimensonality-Based Rendering of LIDAR Point Clouds

    Science.gov (United States)

    Brédif, M.; Vallet, B.; Ferrand, B.

    2015-08-01

    Mobile Mapping Systems (MMS) are now commonly acquiring lidar scans of urban environments for an increasing number of applications such as 3D reconstruction and mapping, urban planning, urban furniture monitoring, practicability assessment for persons with reduced mobility (PRM)... MMS acquisitions are usually huge enough to incur a usability bottleneck for the increasing number of non-expert user that are not trained to process and visualize these huge datasets through specific softwares. A vast majority of their current need is for a simple 2D visualization that is both legible on screen and printable on a static 2D medium, while still conveying the understanding of the 3D scene and minimizing the disturbance of the lidar acquisition geometry (such as lidar shadows). The users that motivated this research are, by law, bound to precisely georeference underground networks for which they currently have schematics with no or poor absolute georeferencing. A solution that may fit their needs is thus a 2D visualization of the MMS dataset that they could easily interpret and on which they could accurately match features with their user datasets they would like to georeference. Our main contribution is two-fold. First, we propose a 3D point cloud stylization for 2D static visualization that leverages a Principal Component Analysis (PCA)-like local geometry analysis. By skipping the usual and error-prone estimation of a ground elevation, this rendering is thus robust to non-flat areas and has no hard-to-tune parameters such as height thresholds. Second, we implemented the corresponding rendering pipeline so that it can scale up to arbitrary large datasets by leveraging the Spark framework and its Resilient Distributed Dataset (RDD) and Dataframe abstractions.

  18. On-the-Fly Decompression and Rendering of Multiresolution Terrain

    Energy Technology Data Exchange (ETDEWEB)

    Lindstrom, P; Cohen, J D

    2009-04-02

    We present a streaming geometry compression codec for multiresolution, uniformly-gridded, triangular terrain patches that supports very fast decompression. Our method is based on linear prediction and residual coding for lossless compression of the full-resolution data. As simplified patches on coarser levels in the hierarchy already incur some data loss, we optionally allow further quantization for more lossy compression. The quantization levels are adaptive on a per-patch basis, while still permitting seamless, adaptive tessellations of the terrain. Our geometry compression on such a hierarchy achieves compression ratios of 3:1 to 12:1. Our scheme is not only suitable for fast decompression on the CPU, but also for parallel decoding on the GPU with peak throughput over 2 billion triangles per second. Each terrain patch is independently decompressed on the fly from a variable-rate bitstream by a GPU geometry program with no branches or conditionals. Thus we can store the geometry compressed on the GPU, reducing storage and bandwidth requirements throughout the system. In our rendering approach, only compressed bitstreams and the decoded height values in the view-dependent 'cut' are explicitly stored on the GPU. Normal vectors are computed in a streaming fashion, and remaining geometry and texture coordinates, as well as mesh connectivity, are shared and re-used for all patches. We demonstrate and evaluate our algorithms on a small prototype system in which all compressed geometry fits in the GPU memory and decompression occurs on the fly every rendering frame without any cache maintenance.

  19. Technologies Render Views of Earth for Virtual Navigation

    Science.gov (United States)

    2012-01-01

    On a December night in 1995, 159 passengers and crewmembers died when American Airlines Flight 965 flew into the side of a mountain while in route to Cali, Colombia. A key factor in the tragedy: The pilots had lost situational awareness in the dark, unfamiliar terrain. They had no idea the plane was approaching a mountain until the ground proximity warning system sounded an alarm only seconds before impact. The accident was of the kind most common at the time CFIT, or controlled flight into terrain says Trey Arthur, research aerospace engineer in the Crew Systems and Aviation Operations Branch at NASA s Langley Research Center. In situations such as bad weather, fog, or nighttime flights, pilots would rely on airspeed, altitude, and other readings to get an accurate sense of location. Miscalculations and rapidly changing conditions could contribute to a fully functioning, in-control airplane flying into the ground. To improve aviation safety by enhancing pilots situational awareness even in poor visibility, NASA began exploring the possibilities of synthetic vision creating a graphical display of the outside terrain on a screen inside the cockpit. How do you display a mountain in the cockpit? You have to have a graphics-powered computer, a terrain database you can render, and an accurate navigation solution, says Arthur. In the mid-1990s, developing GPS technology offered a means for determining an aircraft s position in space with high accuracy, Arthur explains. As the necessary technologies to enable synthetic vision emerged, NASA turned to an industry partner to develop the terrain graphical engine and database for creating the virtual rendering of the outside environment.

  20. Oral Dysfunction

    OpenAIRE

    鈴木, 規子; スズキ, ノリコ; Noriko, SUZUKI

    2004-01-01

    The major oral functions can be categorized as mastication, swallowing, speech and respiratory functions. Dysfunction of these results in dysphagia, speech disorders and abnormal respiration (such as Sleep Apnea). These functions relate to dentistry in the occurrence of : (1) oral preparatory and oral phases, (2) articulation disorders and velopharyngeal incompetence (VPI), and (3) mouth breathing, respiratory and blowing disorders. These disorders are related to oral and maxillofacial diseas...

  1. Ideologia, fetiche e utopia na saúde: uma análise a partir da saúde bucal Ideology, fetish and utopia at oral health public policts

    Directory of Open Access Journals (Sweden)

    Gustavo de Oliveira Figueiredo

    2003-01-01

    Full Text Available No artigo pretendemos caracterizar 3 conceitos essenciais para se compreender a produção de necessidades humanas, como a saúde, seu escalonamento na esfera de valores socialmente construídos e as relações de poder usualmente escondidas quando se trata do adoecer humano. Ao abordar o termo fetiche, tomamos o conceito de Marx sobre o fetichismo da mercadoria, e partimos então dessa perspectiva para caracterizar a expressão "fetichismo odontológico". Depois, fazemos uma reflexão sobre ideologia, um conceito carregado de historicidade e, por isso, polêmico. Partimos, entretanto, já da visão dialética marxista, quando Marx e Engels ressignificaram o que seria ideologia. Concluímos com uma análise do conceito de utopia, que consideramos, no sentido sociológico, a expressão de grupos contra-hegemônicos num movimento de crítica à ideologia. Focalizamos a "utopia da saúde bucal" como um movimento de construção de propostas alternativas com a finalidade de transformar a realidade. O objetivo é constituir uma base de conhecimento que, mesmo bastante limitada, permita analisar a realidade sob um ponto de vista alternativo àquele que estamos habituados, para que assim possamos compreender que o que se faz necessário não são mudanças em métodos ou instrumentos, nem em maneiras de agir, mas a compreensão de uma história mais real e menos natural.The aim of this task is to discuss a new proposal of Collective (Public Oral Health for the professional development of Brazilian dentists. This study is based in a new model of attention in oral health. The Collective Oral Health is a critical movement that is fighting for its own legitimation as public health politics and philosophic bases to dental schools against the hegemony. Fundamented in a analysis of social, cultural, political and economical contexts of contemporary Brazil, and based in a critical reflection of dental education, clinical practice of dentistry and some concepts

  2. Effect of a health education program in the oral health profile of preschool children: an experience in the public network of Porto Alegre, Brazil

    Directory of Open Access Journals (Sweden)

    Tatiana Stürmer Badalotti

    2013-08-01

    Full Text Available Objectives: To estimate the effect of health promotion activities developed in a child education school, on the children’s oral health profile, relating oral manifestations to social, sanitary and feeding factors. Methods: Interventional, longitudinal and describing quantitative work, accomplished with 41 preschool children from four to six years old, living in the area assisted by a Family Health Team (Equipe de Saúde da Família-ESF in the city of Porto Alegre-RS. Diagnosis of dental caries and gingivitis was carried out through oral clinical examination at the beginning and at the end of the study. The dietary pattern was obtained by applying a questionnaire and the social-sanitary aspects of the families, from the records of File A in the Basic Health Care Information System (Sistema de Informação da Atenção Básica-SIAB. Results: Caries disease was diagnosed in 58.5% of the children, whose dmft index (total sum of decayed, extracted and filled teeth was 2.43. There was a decrease in the number of decayed teeth and an increase in extracted and filled teeth. The rates of visible plaque and gums bleeding got better. The social-sanitary aspects were standardized in the community, being not representative. The group presenting the highest dmft values followed a diet containing sugars, with viscous consistence and an intake frequency of four or more times a day. Conclusion: The activities of health promotion developed in the school partially changed the children’s oral conditions. There was a positive correlation between consistency, composition and frequency of diet and the presence of caries disease; on the other hand, therewas no significant relation between social sanitary conditions and the presence of oral diseases.

  3. Effect of a health education program in the oral health profile of preschool children: an experience in the public network of Porto Alegre, Brazil

    Directory of Open Access Journals (Sweden)

    Tatiana Stürmer Badalott

    2013-03-01

    Full Text Available Objectives: To estimate the effect of health promotion activities developed in a child education school, on the children’s oral health profile, relating oral manifestations to social, sanitary and feeding factors. Methods: Interventional, longitudinal and describing quantitative work, accomplished with 41 preschool children from four to six years old, living in the area assisted by a Family Health Team (Equipe de Saúde da Família-ESF in the city of Porto Alegre-RS. Diagnosis of dental caries and gingivitis was carried out through oral clinical examination at the beginning and at the end of the study. The dietary pattern was obtained by applying a questionnaire and the social-sanitary aspects of the families, from the records of File A in the Basic Health Care Information System (Sistema de Informação da Atenção Básica-SIAB. Results: Caries disease was diagnosed in 58.5% of the children, whose dmft index (total sum of decayed, extracted and filled teeth was 2.43. There was a decrease in the number of decayed teeth and an increase in extracted and filled teeth. The rates of visible plaque and gums bleeding got better. The social-sanitary aspects were standardized in the community, being not representative. The group presenting the highest dmft values followed a diet containing sugars, with viscous consistence and an intake frequency of four or more times a day. Conclusion: The activities of health promotion developed in the school partially changed the children’s oral conditions. There was a positive correlation between consistency, composition and frequency of diet and the presence of caries disease; on the other hand, there was no significant relation between social-sanitary conditions and the presence of oral diseases

  4. Oral health and nutrition.

    Science.gov (United States)

    Pla, G W

    1994-03-01

    The relationships between oral health conditions, dietary practices and nutritional status, and general health status in the older American are complex, with many interrelating factors. Just as inadequate nutrition can affect oral health, poor oral health status affects food choices and, thus, nutritional status. It is clearly essential that the primary care practitioner and/or screening health professionals always include an evaluation of oral status in assessment of an elderly person. Effective care for the elderly dental patient requires knowledge about the disease of aging and the impact of those diseases on oral health and nutrition, pharmacology and drug interactions and their impact on oral health status, the biology of aging including sensory changes, the relationship of general medicine and systemic diseases, and psychology and sociology. The attitudes of empathy and understanding, caring and compassion, respect and a positive attitude toward the older patient, and flexibility in treatment planning are also critical elements. The interdisciplinary team of physicians, nurses, nutrition professionals, dentists, and social service professionals must all work together to ensure that good oral health status and adequate nutrition are maintained in older Americans. Recognizing and treating oral health and nutrition problems are important in improving the health and quality of life for the elderly population. Research that can provide more answers to health care problems in this growing group; educating professionals with respect to the relationships between oral health and nutrition; and public policy changes with regard to provision and funding of nutrition services, especially when provided by registered and/or licensed nutrition professionals, contribute to improving the health and quality of life for elders.

  5. Age, Health and Attractiveness Perception of Virtual (Rendered) Human Hair.

    Science.gov (United States)

    Fink, Bernhard; Hufschmidt, Carla; Hirn, Thomas; Will, Susanne; McKelvey, Graham; Lankhof, John

    2016-01-01

    The social significance of physical appearance and beauty has been documented in many studies. It is known that even subtle manipulations of facial morphology and skin condition can alter people's perception of a person's age, health and attractiveness. While the variation in facial morphology and skin condition cues has been studied quite extensively, comparably little is known on the effect of hair on social perception. This has been partly caused by the technical difficulty of creating appropriate stimuli for investigations of people's response to systematic variation of certain hair characteristics, such as color and style, while keeping other features constant. Here, we present a modeling approach to the investigation of human hair perception using computer-generated, virtual (rendered) human hair. In three experiments, we manipulated hair diameter (Experiment 1), hair density (Experiment 2), and hair style (Experiment 3) of human (female) head hair and studied perceptions of age, health and attractiveness. Our results show that even subtle changes in these features have an impact on hair perception. We discuss our findings with reference to previous studies on condition-dependent quality cues in women that influence human social perception, thereby suggesting that hair is a salient feature of human physical appearance, which contributes to the perception of beauty.

  6. VITRAIL: Acquisition, Modeling, and Rendering of Stained Glass.

    Science.gov (United States)

    Thanikachalam, Niranjan; Baboulaz, Loic; Prandoni, Paolo; Trumpler, Stefan; Wolf, Sophie; Vetterli, Martin

    2016-10-01

    Stained glass windows are designed to reveal their powerful artistry under diverse and time-varying lighting conditions; virtual relighting of stained glass, therefore, represents an exceptional tool for the appreciation of this age old art form. However, as opposed to most other artifacts, stained glass windows are extremely difficult if not impossible to analyze using controlled illumination because of their size and position. In this paper, we present novel methods built upon image based priors to perform virtual relighting of stained glass artwork by acquiring the actual light transport properties of a given artifact. In a preprocessing step, we build a material-dependent dictionary for light transport by studying the scattering properties of glass samples in a laboratory setup. We can now use the dictionary to recover a light transport matrix in two ways: under controlled illuminations the dictionary constitutes a sparsifying basis for a compressive sensing acquisition, while in the case of uncontrolled illuminations the dictionary is used to perform sparse regularization. The proposed basis preserves volume impurities and we show that the retrieved light transport matrix is heterogeneous, as in the case of real world objects. We present the rendering results of several stained glass artifacts, including the Rose Window of the Cathedral of Lausanne, digitized using the presented methods.

  7. Moisture Transfer through Facades Covered with Organic Binder Renders

    Directory of Open Access Journals (Sweden)

    Carmen DICO

    2013-07-01

    Full Text Available Year after year we witness the negative effect of water over buildings, caused by direct or indirect actions. This situation is obvious in case of old, historical building, subjected to this aggression for a long period of time, but new buildings are also affected. Moisture in building materials causes not only structural damage, but also reduces the thermal insulation capacity of building components.Materials like plasters or paints have been used historically for a long period of time, fulfilling two basics functions: Decoration and Protection. The most acute demands are made on exterior plasters, as they, besides being an important decorative element for the facade, must perform two different functions simultaneously: protect the substrate against weathering and moisture without sealing, providing it a certain ability to “breathe” (Heilen, 2005. In order to accomplish this aim, the first step is to understand the hygrothermal behavior of coating and substrate and define the fundamental principles of moisture transfer; According to Künzel’s Facade Protection Theory, two material properties play the most important role: Water absorption and Vapor permeability.In the context of recently adoption (2009 of the “harmonized” European standard EN 15824 – „Specifications for external renders and internal plasters based on organic binders”, this paper deals extensively with the interaction of the two mentioned above properties for the coating materials, covered by EN 15824.

  8. Light field rendering with omni-directional camera

    Science.gov (United States)

    Todoroki, Hiroshi; Saito, Hideo

    2003-06-01

    This paper presents an approach to capture visual appearance of a real environment such as an interior of a room. We propose the method for generating arbitrary viewpoint images by building light field with the omni-directional camera, which can capture the wide circumferences. Omni-directional camera used in this technique is a special camera with the hyperbolic mirror in the upper part of a camera, so that we can capture luminosity in the environment in the range of 360 degree of circumferences in one image. We apply the light field method, which is one technique of Image-Based-Rendering(IBR), for generating the arbitrary viewpoint images. The light field is a kind of the database that records the luminosity information in the object space. We employ the omni-directional camera for constructing the light field, so that we can collect many view direction images in the light field. Thus our method allows the user to explore the wide scene, that can acheive realistic representation of virtual enviroment. For demonstating the proposed method, we capture image sequence in our lab's interior environment with an omni-directional camera, and succesfully generate arbitray viewpoint images for virual tour of the environment.

  9. WikiPrints: rendering enterprise Wiki content for printing

    Science.gov (United States)

    Berkner, Kathrin

    2010-02-01

    Wikis have become a tool of choice for collaborative, informative communication. In contrast to the immense Wikipedia, that serves as a reference web site and typically covers only one topic per web page, enterprise wikis are often used as project management tools and contain several closely related pages authored by members of one project. In that scenario it is useful to print closely related content for review or teaching purposes. In this paper we propose a novel technique for rendering enterprise wiki content for printing called WikiPrints, that creates a linearized version of wiki content formatted as a mixture between web layout and conventional document layout suitable for printing. Compared to existing print options for wiki content, Wikiprints automatically selects content from different wiki pages given user preferences and usage scenarios. Meta data such as content authors or time of content editing are considered. A preview of the linearized content is shown to the user and an interface for making manual formatting changes provided.

  10. Age, Health and Attractiveness Perception of Virtual (Rendered) Human Hair

    Science.gov (United States)

    Fink, Bernhard; Hufschmidt, Carla; Hirn, Thomas; Will, Susanne; McKelvey, Graham; Lankhof, John

    2016-01-01

    The social significance of physical appearance and beauty has been documented in many studies. It is known that even subtle manipulations of facial morphology and skin condition can alter people’s perception of a person’s age, health and attractiveness. While the variation in facial morphology and skin condition cues has been studied quite extensively, comparably little is known on the effect of hair on social perception. This has been partly caused by the technical difficulty of creating appropriate stimuli for investigations of people’s response to systematic variation of certain hair characteristics, such as color and style, while keeping other features constant. Here, we present a modeling approach to the investigation of human hair perception using computer-generated, virtual (rendered) human hair. In three experiments, we manipulated hair diameter (Experiment 1), hair density (Experiment 2), and hair style (Experiment 3) of human (female) head hair and studied perceptions of age, health and attractiveness. Our results show that even subtle changes in these features have an impact on hair perception. We discuss our findings with reference to previous studies on condition-dependent quality cues in women that influence human social perception, thereby suggesting that hair is a salient feature of human physical appearance, which contributes to the perception of beauty. PMID:28066276

  11. Differentiation renders susceptibility to excitotoxicity in HT22 neurons

    Institute of Scientific and Technical Information of China (English)

    Minchao He; Jun Liu; Shaowu Cheng; Yigang Xing; William Z Suo

    2013-01-01

    HT22 is an immortalized mouse hippocampal neuronal cell line that does not express cholinergic and glutamate receptors like mature hippocampal neurons in vivo. This in part prevents its use as a model for mature hippocampal neurons in memory-related studies. We now report that HT22 cells were appropriately induced to differentiate and possess properties similar to those of mature hippocampal neurons in vivo, such as becoming more glutamate-receptive and excitatory. Results showed that sensitivity of HT22 cells to glutamate-induced toxicity changed dramatically when comparing undifferentiated with differentiated cells, with the half-effective concentration for differentiated cells reducing approximately two orders of magnitude. Moreover, glutamate-induced toxicity in differentiated cells, but not undifferentiated cells, was inhibited by the N-methyl-D- aspartate receptor antagonists MK-801 and memantine. Evidently, differentiated HT22 cells expressed N-methyl-D-aspartate receptors, while undifferentiated cells did not. Our experimental findings indicated that differentiation is important for immortalized cell lines to render post-mitotic neuronal properties, and that differentiated HT22 neurons represent a better model of hippocampal neurons than undifferentiated cells.

  12. Encouraging Teenagers to Improve Speaking Skills through Games in a Colombian Public School Motivación de adolescentes para mejorar su expresión oral mediante el juego en un colegio público colombiano

    Directory of Open Access Journals (Sweden)

    William Urrutia Leó

    2010-04-01

    Full Text Available Our project was implemented with tenth grade students of a public school located in the Usme Zone in Bogotá. We decided to develop this action research project because we were concerned about our students' difficulties when attempting to speak English. They felt inhibited with activities that involved oral interaction mainly because they were afraid of criticism and jokes about what they said. To develop our project we used video recordings, the teacher's journal and questionnaires answered by the students. The results showed that students felt better, free and confident when they participated in oral tasks, particularly during games. We saw collaboration, solidarity and interaction among them. In addition, they were relaxed and happy at the time they had to perform in small groups.El mejoramiento de las habilidades lingüísticas a través del juego se adelanto con estudiantes de grado décimo de un colegio público ubicado en la localidad de Usme, en Bogotá. Se decidió desarrollar este proyecto de investigación-acción porque las dificultades de los estudiantes para hablar en inglés eran preocupantes. Estos se sentían inhibidos en las actividades que involucraran interacción oral, principalmente porque sentían temor ante las críticas y las bromas acerca de lo que dijeran. Para el desarrollo del proyecto se utilizaron videograbaciones, el diario de profesor y cuestionarios que respondieron los estudiantes. Los resultados mostraron que los estudiantes se sintieron mejor, libres y seguros cuando participaron en actividades orales, particularmente en juegos. Así, se observo colaboración, solidaridad e interacción entre ellos. Además, estuvieron motivados y contentos a la hora de actuar en grupos pequeños.

  13. [Oral transmission of Chagas' disease].

    Science.gov (United States)

    Toso M, Alberto; Vial U, Felipe; Galanti, Norbel

    2011-02-01

    The traditional transmission pathways of Chagas' disease are vectorial, transfusional, transplacental and organ transplantation. However, oral transmission is gaining importance. The first evidence of oral transmission was reported in Brazil in 1965. Nowadays the oral route is the transmission mode in 50% of cases in the Amazon river zone. Oral infection is produced by the ingestion of infected triatomine bugs or their feces, undercooked meat from infested host animals and food contaminated with urine or anal secretion of infected marsupials. Therefore travelers to those zones should be advised about care to be taken with ingested food. In Chile, this new mode of transmission should be considered in public health policies.

  14. A silent public health crisis: untreated caries and dental infections among 6- and 12-year-old children in the Philippine National Oral Health Survey 2006.

    Science.gov (United States)

    Monse, Bella; Benzian, Habib; Araojo, Juan; Holmgren, Christopher; van Palenstein Helderman, Wim; Naliponguit, Ella-Cecilia; Heinrich-Weltzien, Roswitha

    2015-03-01

    The oral health status of 6- and 12-year-old Filipino children was assessed in a representative national sample of 2030 6-year-old and 2022 12-year-old children, using WHO Basic Methods for Oral Health Surveys (4th edition, 1997) and the PUFA (pulpal involvement [P/p], ulceration caused by dislocated tooth fragments [U/u], fistula [F/f], and abscess [A/a]) index. A subsample of 242 12-year-old children was included to assess backward comparability between the 1998 Oral Health Survey that used WHO Basic Methods (3rd edition, 1987). The results showed that 97% of 6-year-old children had caries (mean dmft 8.4), 85% showed dental infection (mean pufa 3.4), 20% reported pain when examined. In all, 82% of 12-year-old children had caries (mean DMFT 2.9), 56% prevalence of pulp involvement (mean PUFA 1.0), and 16% reported pain when examined. Differences in methodology between the 1998 and the 2006 surveys are likely to have had an effect on the observed reduction in DMFT, indicating that the real caries prevalence had not changed much and remains very high.

  15. 36 CFR 251.97 - Oral presentation.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Oral presentation. 251.97... presentation. (a) Purpose. An oral presentation provides an additional opportunity for an appellant, and other..., emphasize, and/or clarify information related to an appeal. Oral presentations are to be conducted in...

  16. SVGenes: a library for rendering genomic features in scalable vector graphic format.

    Science.gov (United States)

    Etherington, Graham J; MacLean, Daniel

    2013-08-01

    Drawing genomic features in attractive and informative ways is a key task in visualization of genomics data. Scalable Vector Graphics (SVG) format is a modern and flexible open standard that provides advanced features including modular graphic design, advanced web interactivity and animation within a suitable client. SVGs do not suffer from loss of image quality on re-scaling and provide the ability to edit individual elements of a graphic on the whole object level independent of the whole image. These features make SVG a potentially useful format for the preparation of publication quality figures including genomic objects such as genes or sequencing coverage and for web applications that require rich user-interaction with the graphical elements. SVGenes is a Ruby-language library that uses SVG primitives to render typical genomic glyphs through a simple and flexible Ruby interface. The library implements a simple Page object that spaces and contains horizontal Track objects that in turn style, colour and positions features within them. Tracks are the level at which visual information is supplied providing the full styling capability of the SVG standard. Genomic entities like genes, transcripts and histograms are modelled in Glyph objects that are attached to a track and take advantage of SVG primitives to render the genomic features in a track as any of a selection of defined glyphs. The feature model within SVGenes is simple but flexible and not dependent on particular existing gene feature formats meaning graphics for any existing datasets can easily be created without need for conversion. The library is provided as a Ruby Gem from https://rubygems.org/gems/bio-svgenes under the MIT license, and open source code is available at https://github.com/danmaclean/bioruby-svgenes also under the MIT License. dan.maclean@tsl.ac.uk.

  17. California's state oral health infrastructure: opportunities for improvement and funding.

    Science.gov (United States)

    Diringer, Joel; Phipps, Kathy R

    2012-01-01

    California has virtually no statewide dental public health infrastructure leaving the state without leadership, a surveillance program, an oral health plan, oral health promotion and disease prevention programs, and federal funding. Based on a literature review and interviews with 15 oral health officials nationally, the paper recommends hiring a state dental director with public health experience, developing a state oral health plan, and seeking federal and private funding to support an office of oral health.

  18. Lives rendered invisible: Bearing witness to human suffering

    Directory of Open Access Journals (Sweden)

    Mladjo Ivanovic

    2016-10-01

    Full Text Available This paper explores the ethical challenges involved in the ways public representation structures our experiences of atrocities and facilitates an adequate awareness of and response towards the suffering of others. It points out that such an analysis should not exhaust itself in answering what makes public representations of human suffering ethically suspicious and intolerable, but should rather extend this task by clarifying how the public forms sentiments about their social and political reality by elucidating under which conditions public representation promotes broader political agendas. One of the central tenets of human rights advocacy is the widespread conviction that exposure to images and stories of human rights abuse has a mobilizing effect on western audience(s whose exposure to such knowledge can motivate them to intervene and prevent future atrocities. In order to assess the basic implications of such a conviction we must answer at least three principal clusters of questions. First, how do public representations of atrocities affect individuals and their capacities to conceive and respond to social injustices and the suffering of others? Under what circumstances may agents respond effectively to shocking content? Second, how do social powers operate within the field of perception in order to control how the viewing public is affected? And how do these effects inform and galvanize political support or opposition regarding concrete historical events? Finally, what can be said about the responsibilities of visual representation? Whose agency is it that images inform, and what reforms are necessary to make representations of suffering ethically effective means to encourage better acknowledgment of individual and collective responsibilities that would motivate the public to meet its moral and political obligations? This paper ultimately suggests that in order for politically implicated images to have an immediate critical effect on

  19. Oral histoplasmosis

    Directory of Open Access Journals (Sweden)

    Patil Karthikeya

    2009-01-01

    Full Text Available Histoplasmosis is a systemic fungal disease that takes various clinical forms, among which oral lesions are rare. The disseminated form of the disease that usually occurs in association with Human Immunodeficiency Virus (HIV is one of the AIDS-defining diseases. Isolated oral histoplasmosis, without systemic involvement, with underlying immunosuppression due to AIDS is very rare. We report one such case of isolated oral histoplasmosis in a HIV-infected patient.

  20. Remembrance of conversations past: oral advance statements about medical treatment.

    Science.gov (United States)

    Sommerville, A.

    1995-01-01

    Polls show increasing public interest in advance statements or directives about medical treatment ("living wills") but that few people, apart from Jehovah's Witnesses, carry such documents. Patients' firm, witnessed oral decisions are often sufficient to aid clinical decision making but should still be recorded in medical notes. Without documentation, dilemmas arise when others claim to know patients' views on the basis of past unrecorded conversations and demand withdrawal of treatment when patients are not terminally ill and cannot speak for themselves. Legal and ethical considerations oblige doctors to act in the best interests of an incapacitated patient; these considerations are now formally defined in draft legislation as including consideration of the patient's past wishes. The practicalities of ascertaining the strength and validity of such wishes from conversations reported second hand are complex. The paucity of legal and ethical guidance on reported oral advance statements makes debate imperative and renders the alternative of having designated surrogate decision makers increasingly attractive. Images p1664-a PMID:7795460

  1. New light field camera based on physical based rendering tracing

    Science.gov (United States)

    Chung, Ming-Han; Chang, Shan-Ching; Lee, Chih-Kung

    2014-03-01

    Even though light field technology was first invented more than 50 years ago, it did not gain popularity due to the limitation imposed by the computation technology. With the rapid advancement of computer technology over the last decade, the limitation has been uplifted and the light field technology quickly returns to the spotlight of the research stage. In this paper, PBRT (Physical Based Rendering Tracing) was introduced to overcome the limitation of using traditional optical simulation approach to study the light field camera technology. More specifically, traditional optical simulation approach can only present light energy distribution but typically lack the capability to present the pictures in realistic scenes. By using PBRT, which was developed to create virtual scenes, 4D light field information was obtained to conduct initial data analysis and calculation. This PBRT approach was also used to explore the light field data calculation potential in creating realistic photos. Furthermore, we integrated the optical experimental measurement results with PBRT in order to place the real measurement results into the virtually created scenes. In other words, our approach provided us with a way to establish a link of virtual scene with the real measurement results. Several images developed based on the above-mentioned approaches were analyzed and discussed to verify the pros and cons of the newly developed PBRT based light field camera technology. It will be shown that this newly developed light field camera approach can circumvent the loss of spatial resolution associated with adopting a micro-lens array in front of the image sensors. Detailed operational constraint, performance metrics, computation resources needed, etc. associated with this newly developed light field camera technique were presented in detail.

  2. Design and Implementation of an Application. Programming Interface for Volume Rendering

    OpenAIRE

    Selldin, Håkan

    2002-01-01

    To efficiently examine volumetric data sets from CT or MRI scans good volume rendering applications are needed. This thesis describes the design and implementation of an application programming interface (API) to be used when developing volume-rendering applications. A complete application programming interface has been designed. The interface is designed so that it makes writing application programs containing volume rendering fast and easy. The interface also makes created application progr...

  3. Oral vs. salivary diagnostics

    Science.gov (United States)

    Marques, Joana; Corby, Patricia M.; Barber, Cheryl A.; Abrams, William R.; Malamud, Daniel

    2015-05-01

    The field of "salivary diagnostics" includes studies utilizing samples obtained from a variety of sources within the oral cavity. These samples include; whole unstimulated saliva, stimulated whole saliva, duct saliva collected directly from the parotid, submandibular/sublingual glands or minor salivary glands, swabs of the buccal mucosa, tongue or tonsils, and gingival crevicular fluid. Many publications state "we collected saliva from subjects" without fully describing the process or source of the oral fluid. Factors that need to be documented in any study include the time of day of the collection, the method used to stimulate and collect the fluid, and how much fluid is being collected and for how long. The handling of the oral fluid during and post-collection is also critical and may include addition of protease or nuclease inhibitors, centrifugation, and cold or frozen storage prior to assay. In an effort to create a standard protocol for determining a biomarker's origin we carried out a pilot study collecting oral fluid from 5 different sites in the mouth and monitoring the concentrations of pro- and anti-inflammatory cytokines detected using MesoScaleDiscovery (MSD) electrochemiluminesence assays. Our data suggested that 3 of the cytokines are primarily derived from the submandibular gland, while 7 of the cytokines come from a source other than the major salivary glands such as the minor salivary glands or cells in the oral mucosae. Here we review the literature on monitoring biomarkers in oral samples and stress the need for determining the blood/saliva ratio when a quantitative determination is needed and suggest that the term oral diagnostic be used if the source of an analyte in the oral cavity is unknown.

  4. Oralidade, alfabetização e leitura: enfrentando diferenças e complexidades na escola pública Orality, literacy and reading: dealing with differences and complexities in the public school

    Directory of Open Access Journals (Sweden)

    Claudemir Belintane

    2010-12-01

    Full Text Available Apresenta-se o relato de uma pesquisa, na área de ensino da leitura e da escrita, realizada em duas séries de primeiros anos do ensino fundamental, em uma escola pública da cidade de São Paulo. A partir de diagnósticos baseados na cultura oral de alunos que apresentavam dificuldades de aprendizagem de leitura mesmo após três ou quatro anos de escolarização, procurou-se criar, ministrar e monitorar um programa de ensino baseado na transição entre cultura oral e cultura escrita. Trata-se de uma pesquisa de natureza qualitativa, cuja preocupação é lidar com a heterogeneidade da sala de aula em seu processo e em sua complexidade. O viés teórico é multidisciplinar, incluindo áreas de pesquisas sujeitas às influências da linguística, da psicanálise e da educação e, ainda, dos estudos de pesquisadores da área que se convencionou chamar "equação oralidade-escrita" (Havelock,1995. Os resultados trazem dados, relatos de intervenções e reflexões que podem subsidiar programas de ensino para a faixa etária estudada e questiona ainda o foco excessivo que as metodologias construtivistas põem sobre o ato de escrever ou sobre a própria escrita. Propõe uma nova perspectiva de enlaçamento entre a cultura oral dos alunos e letramento escolar, assumindo uma ambiência de oralidade, alfabetização e leitura que inclui o suporte eletrônico e uma organização mais coletiva do trabalho escolar nas séries iniciais, sobretudo na articulação ("dobradiça" entre o ensino infantil e o fundamental I.The text reports on a research in the field of the teaching of reading and writing carried out with two first year classes of fundamental education at a public school in the city of São Paulo. Starting from diagnostics based on the oral culture of the pupils that displayed learning difficulties in reading even after three or four years of schooling, we sought to create, administer, and monitor a teaching program based on the transition

  5. Influence of rendering methods on yield and quality of chicken fat recovered from broiler skin

    Directory of Open Access Journals (Sweden)

    Liang-Kun Lin

    2017-06-01

    Full Text Available Objective In order to utilize fat from broiler byproducts efficiently, it is necessary to develop an appropriate rendering procedure and establish quality information for the rendered fat. A study was therefore undertaken to evaluate the influence of rendering methods on the amounts and general properties of the fat recovered from broiler skin. Methods The yield and quality of the broiler skin fat rendered through high and lower energy microwave rendering (3.6 W/g for 10 min and 2.4 W/g for 10 min for high power microwave rendering (HPMR and high power microwave rendering (LPMR, respectively, oven baking (OB, at 180°C for 40 min, and water cooking (WC, boiling for 40 min were compared. Results Microwave-rendered skin exhibited the highest yields and fat recovery rates, followed by OB, and WC fats (p<0.05. HPMR fat had the highest L*, a*, and b* values, whereas WC fat had the highest moisture content, acid values, and thiobarbituric acid (TBA values (p<0.05. There was no significant difference in the acid value, peroxide value, and TBA values between HPMR and LPMR fats. Conclusion Microwave rendering at a power level of 3.6 W/g for 10 min is suggested base on the yield and quality of chicken fat.

  6. Performance Assessment of Three Rendering Engines in 3D Computer Graphics Software

    Directory of Open Access Journals (Sweden)

    Žan Vidmar

    2015-03-01

    Full Text Available The aim of the research was the determination of testing conditions and visual and numerical evaluation of renderings made with three different rendering engines in Maya software, which is widely used for educational and computer art purposes. In the theoretical part the overview of light phenomena and their simulation in virtual space is presented. This is followed by a detailed presentation of the main rendering methods and the results and limitations of their applications to 3D objects. At the end of the theoretical part the importance of a proper testing scene and especially the role of Cornell box are explained. In the experimental part the terms and conditions as well as hardware and software used for the research are presented. This is followed by a description of the procedures, where we focused on the rendering quality and time, which enabled the comparison of settings of different render engines and determination of conditions for further rendering of testing scenes. The experimental part continued with rendering a variety of simple virtual scenes including Cornell box and virtual object with different materials and colours. Apart from visual evaluation, which was the starting point for comparison of renderings, a procedure for numerical estimation and colour deviations of renderings using the selected regions of interest in the final images is presented.

  7. Real-time volume rendering of digital medical images on an iOS device

    Science.gov (United States)

    Noon, Christian; Holub, Joseph; Winer, Eliot

    2013-03-01

    Performing high quality 3D visualizations on mobile devices, while tantalizingly close in many areas, is still a quite difficult task. This is especially true for 3D volume rendering of digital medical images. Allowing this would empower medical personnel a powerful tool to diagnose and treat patients and train the next generation of physicians. This research focuses on performing real time volume rendering of digital medical images on iOS devices using custom developed GPU shaders for orthogonal texture slicing. An interactive volume renderer was designed and developed with several new features including dynamic modification of render resolutions, an incremental render loop, a shader-based clipping algorithm to support OpenGL ES 2.0, and an internal backface culling algorithm for properly sorting rendered geometry with alpha blending. The application was developed using several application programming interfaces (APIs) such as OpenSceneGraph (OSG) as the primary graphics renderer coupled with iOS Cocoa Touch for user interaction, and DCMTK for DICOM I/O. The developed application rendered volume datasets over 450 slices up to 50-60 frames per second, depending on the specific model of the iOS device. All rendering is done locally on the device so no Internet connection is required.

  8. Protocol for the economic evaluation of the diarrhea alleviation through zinc and oral rehydration salt therapy at scale through private and public providers in rural Gujarat and Uttar Pradesh, India.

    Science.gov (United States)

    Shillcutt, Samuel D; LeFevre, Amnesty E; Walker, Christa L Fischer; Black, Robert E; Mazumder, Sarmila

    2014-11-19

    Child diarrhea persists as a leading public health problem in India despite evidence supporting zinc and low osmolarity oral rehydration salts as effective treatments. Across 2 years in 2010-2013, the Diarrhea Alleviation using Zinc and Oral Rehydration Salts Therapy (DAZT) program was implemented to operationalize delivery of these interventions at scale through private and public sector providers in rural Gujarat and Uttar Pradesh, India. This study evaluates the cost-effectiveness of DAZT program activities relative to status quo conditions existing before the study, comparing a Monte Carlo simulation method with net-benefit regression, discussing the strengths and weaknesses of each approach. A control group was not included in the 'before and after' study design as zinc has proven effectiveness for diarrhea treatment. Costs will be calculated using a societal perspective including program implementation and household out-of-pocket payments for care seeking, as well as estimates of wages lost. Outcomes will be measured in terms of episodes averted in net-benefit regression and in terms of the years of life lost component of disability-adjusted life years in the method based on Monte Carlo simulation. The Lives Saved Tool will be used to model anticipated changes in mortality over time and deaths averted based on incremental changes in coverage of oral rehydration salts and zinc. Data will derive from cross-sectional surveys at the start, midpoint, and endpoint of the program. In addition, Lives Saved Tool (LiST) projections will be used to define the reference case value for the ceiling ratio in terms of natural units. This study will be useful both in its application to an economic evaluation of a public health program in its implementation phase but also in its comparison of two methodological approaches to cost-effectiveness analysis. Both policy recommendations and methodological lessons learned will be discussed, recognizing the limitations in drawing

  9. Fluoride and Oral Health

    DEFF Research Database (Denmark)

    O'Mullane, D M; Baez, R J; Jones, S

    2016-01-01

    of the original 1994 document, again using the expertise of researchers from the extensive fi elds of knowledge required to successfully implement complex interventions such as the use of fl uorides to improve dental and oral health. Financial support for research into the development of these new fl uoride......The discovery during the fi rst half of the 20th century of the link between natural fl uoride, adjusted fl uoride levels in drinking water and reduced dental caries prevalence proved to be a stimulus for worldwide on-going research into the role of fl uoride in improving oral health...... including salt, milk, tablets, toothpaste, gels and varnishes. In 1993, the World Health Organization convened an Expert Committee to provide authoritative information on the role of fl uorides in the promotion of oral health throughout the world (WHO TRS 846, 1994). This present publication is a revision...

  10. 31 CFR 515.548 - Services rendered by Cuba to United States aircraft.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Services rendered by Cuba to United... REGULATIONS Licenses, Authorizations, and Statements of Licensing Policy § 515.548 Services rendered by Cuba to United States aircraft. Specific licenses are issued for payment to Cuba of charges for services...

  11. Frequency domain volume rendering by the wavelet X-ray transform

    NARCIS (Netherlands)

    Westenberg, Michel A.; Roerdink, Jos B.T.M.

    2000-01-01

    We describe a wavelet-based X-ray rendering method in the frequency domain with a smaller time complexity than wavelet splatting. Standard Fourier volume rendering is summarized and interpolation and accuracy issues are briefly discussed. We review the implementation of the fast wavelet transform in

  12. Evaluation of voxel-based rendering of high resolution surface descriptions

    DEFF Research Database (Denmark)

    Hammershøi, Dorte; Olesen, Søren Krarup; Markovic, Milos

    2014-01-01

    responses by having more “distinct” representations of the individual reflections. When rendered audible, such descriptions will lead to a sound quality that can best be described as “canned”. For the rendering of real rooms, as e.g. in "teletransporting", this problem may be addressed by using high...

  13. Oral Histoplasmosis.

    Science.gov (United States)

    Folk, Gillian A; Nelson, Brenda L

    2017-02-20

    A 44-year-old female presented to her general dentist with the chief complaint of a painful mouth sore of 2 weeks duration. Clinical examination revealed an irregularly shaped ulcer of the buccal and lingual attached gingiva of the anterior mandible. A biopsy was performed and microscopic evaluation revealed histoplasmosis. Histoplasmosis, caused by Histoplasma capsulate, is the most common fungal infection in the United States. Oral lesions of histoplasmosis are generally associated with the disseminated form of histoplasmosis and may present as a fungating or ulcerative lesion of the oral mucosa. The histologic findings and differential diagnosis for oral histoplasmosis are discussed.

  14. Oral leukoplakia

    DEFF Research Database (Denmark)

    Holmstrup, Palle; Dabelsteen, Erik

    2016-01-01

    The idea of identifying oral lesions with a precancerous nature, i.e. in the sense of pertaining to a pathologic process with an increased risk for future malignant development, of course is to prevent frank malignancy to occur in the affected area. The most common oral lesion with a precancerous...... nature is oral leukoplakia, and for decades it has been discussed how to treat these lesions. Various treatment modalities, such as systemic therapies and surgical removal, have been suggested. The systemic therapies tested so far include retinoids, extracts of green tea, inhibitors of cyclooxygenase-2...

  15. Method and system for rendering and interacting with an adaptable computing environment

    Science.gov (United States)

    Osbourn, Gordon Cecil [Albuquerque, NM; Bouchard, Ann Marie [Albuquerque, NM

    2012-06-12

    An adaptable computing environment is implemented with software entities termed "s-machines", which self-assemble into hierarchical data structures capable of rendering and interacting with the computing environment. A hierarchical data structure includes a first hierarchical s-machine bound to a second hierarchical s-machine. The first hierarchical s-machine is associated with a first layer of a rendering region on a display screen and the second hierarchical s-machine is associated with a second layer of the rendering region overlaying at least a portion of the first layer. A screen element s-machine is linked to the first hierarchical s-machine. The screen element s-machine manages data associated with a screen element rendered to the display screen within the rendering region at the first layer.

  16. Accelerating Time-Varying Hardware Volume Rendering Using TSP Trees and Color-Based Error Metrics

    Science.gov (United States)

    Ellsworth, David; Chiang, Ling-Jen; Shen, Han-Wei; Kwak, Dochan (Technical Monitor)

    2000-01-01

    This paper describes a new hardware volume rendering algorithm for time-varying data. The algorithm uses the Time-Space Partitioning (TSP) tree data structure to identify regions within the data that have spatial or temporal coherence. By using this coherence, the rendering algorithm can improve performance when the volume data is larger than the texture memory capacity by decreasing the amount of textures required. This coherence can also allow improved speed by appropriately rendering flat-shaded polygons instead of textured polygons, and by not rendering transparent regions. To reduce the polygonization overhead caused by the use of the hierarchical data structure, we introduce an optimization method using polygon templates. The paper also introduces new color-based error metrics, which more accurately identify coherent regions compared to the earlier scalar-based metrics. By showing experimental results from runs using different data sets and error metrics, we demonstrate that the new methods give substantial improvements in volume rendering performance.

  17. Investigation on Demand of Oral Health Regulation and Policy for the General Public in China%社会大众对口腔卫生法规和政策需求调查

    Institute of Scientific and Technical Information of China (English)

    孙轶群; 李刚; 张思佳; 谢军; 公文; 管力; 刘思麟; 郝媛媛

    2013-01-01

    目的 调查了解目前我国社会大众对口腔卫生法规和政策的认识、需求现状,从而分析我国口腔卫生法规和政策存在的问题并提出政策建议.方法 2011年采用分层抽样的方法,在全国15省(市)的42个区/县调查18岁及以上居民1752人.结果 在所有被调查者中,认为管理部门对口腔卫生法规和政策的宣传工作到位的占7.42%,认为政府对口腔医疗市场的监督是到位的占9.65%,认为政府对口腔医疗市场最有效的监督方式是增加立法的占40.98%.结论 我国社会大众认为存在口腔卫生法规和政策的宣传力度不到位、口腔医疗保健市场的监督不到位等问题,应加强对口腔卫生法规和政策的宣传、加强对口腔医疗保健市场的监督等政策建议.%Objective To analysis current problems existed in oral health regulation and policy thereby propose appropriate suggestions, based on a survey of understanding and demand in general public for related aspects. Methods Forty two survey sites in 15 provinces/cities were chosen by stratified sampling with a total of 1 752 respondents above 18 years old. Results Among all respondents, 7. 42% considered the propaganda work of o-ral health regulation and policy as targeting; 9. 65% considered the supervision as eligible; 40. 98% believed that the most effective way for supervising oral health care market was further legislation. Conclusion The propaganda work of oral health regulation, policy and supervision were not sufficient; pertinent suggestions were provided.

  18. Oral pathology.

    Science.gov (United States)

    Niemiec, Brook A

    2008-05-01

    Oral disease is exceedingly common in small animal patients. In addition, there is a very wide variety of pathologies that are encountered within the oral cavity. These conditions often cause significant pain and/or localized and systemic infection; however, the majority of these conditions have little to no obvious clinical signs. Therefore, diagnosis is not typically made until late in the disease course. Knowledge of these diseases will better equip the practitioner to effectively treat them. This article covers the more common forms of oral pathology in the dog and cat, excluding periodontal disease, which is covered in its own chapter. The various pathologies are presented in graphic form, and the etiology, clinical signs, recommended diagnostic tests, and treatment options are discussed. Pathologies that are covered include: persistent deciduous teeth, fractured teeth, intrinsically stained teeth, feline tooth resorption, caries, oral neoplasia, eosinophilic granuloma complex, lymphoplasmacytic gingivostomatitis, enamel hypoplasia, and "missing" teeth.

  19. Herpes - oral

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/000606.htm Herpes - oral To use the sharing features on this page, ... 374. Read More Atopic dermatitis Cancer Fever Genital herpes Mouth ulcers Vesicles Review Date 8/14/2015 Updated ...

  20. Lexical Prosody as an Aspect of Oral Reading Fluency

    Science.gov (United States)

    Schwanenflugel, Paula J.; Benjamin, Rebekah George

    2017-01-01

    The purpose of the study was to determine whether the lexical compounding, suffixation, and part of speech aspects of lexical prosody rendered while reading text aloud are predictive of children's developing oral reading fluency and reading comprehension skills. Ninety-four third grade children were recorded while reading aloud a grade-level…

  1. Disparities in Oral Health

    Science.gov (United States)

    ... 2020: Oral Health Objectives Site Map Disparities in Oral Health Recommend on Facebook Tweet Share Compartir Oral health ... to get and keep dental insurance. Disparities in Oral Health Some of the oral health disparities that exist ...

  2. The global burden of oral diseases and risks to oral health

    DEFF Research Database (Denmark)

    Petersen, Poul Erik; Bourgeois, Denis; Ogawa, Hiroshi

    2005-01-01

    high for the disadvantaged and poor population groups in both developing and developed countries. Oral diseases such as dental caries, periodontal disease, tooth loss, oral mucosal lesions and oropharyngeal cancers, human immunodeficiency virus/acquired immunodeficiency syndrome (HIV/AIDS)-related oral.......g. diabetes or HIV/AIDS). Worldwide strengthening of public health programmes through the implementation of effective measures for the prevention of oral disease and promotion of oral health is urgently needed. The challenges of improving oral health are particularly great in developing countries....

  3. Improving the oral health of older people

    DEFF Research Database (Denmark)

    Petersen, Poul Erik; Yamamoto, Tatsuo

    2005-01-01

    changing burden of chronic diseases in old age. Chronic disease and most oral diseases share common risk factors. Globally, poor oral health amongst older people has been particularly evident in high levels of tooth loss, dental caries experience, and the prevalence rates of periodontal disease, xerostomia...... and oral precancer/cancer. The negative impact of poor oral conditions on the quality of life of older adults is an important public health issue, which must be addressed by policy-makers. The means for strengthening oral health programme implementation are available; the major challenge is therefore...... to translate knowledge into action programmes for the oral health of older people. The World Health Organization recommends that countries adopt certain strategies for improving the oral health of the elderly. National health authorities should develop policies and measurable goals and targets for oral health...

  4. ORIGINAL ARTICLE Oral Health in the African Region: Progress ...

    African Journals Online (AJOL)

    Ogunbodede

    Objectives: According to The World Oral Health Report 2003, oral diseases remain a major public health ... institutional resources needed to implement, monitor and evaluate the Regional Strategy. ... among children (50%) and adults (75%).

  5. COMPANION ANIMALS SYMPOSIUM: Rendered ingredients significantly influence sustainability, quality, and safety of pet food.

    Science.gov (United States)

    Meeker, D L; Meisinger, J L

    2015-03-01

    The rendering industry collects and safely processes approximately 25 million t of animal byproducts each year in the United States. Rendering plants process a variety of raw materials from food animal production, principally offal from slaughterhouses, but include whole animals that die on farms or in transit and other materials such as bone, feathers, and blood. By recycling these byproducts into various protein, fat, and mineral products, including meat and bone meal, hydrolyzed feather meal, blood meal, and various types of animal fats and greases, the sustainability of food animal production is greatly enhanced. The rendering industry is conscious of its role in the prevention of disease and microbiological control and providing safe feed ingredients for livestock, poultry, aquaculture, and pets. The processing of otherwise low-value OM from the livestock production and meat processing industries through rendering drastically reduces the amount of waste. If not rendered, biological materials would be deposited in landfills, burned, buried, or inappropriately dumped with large amounts of carbon dioxide, ammonia, and other compounds polluting air and water. The majority of rendered protein products are used as animal feed. Rendered products are especially valuable to the livestock and pet food industries because of their high protein content, digestible AA levels (especially lysine), mineral availability (especially calcium and phosphorous), and relatively low cost in relation to their nutrient value. The use of these reclaimed and recycled materials in pet food is a much more sustainable model than using human food for pets.

  6. Three-dimensional rendering of segmented object using matlab - biomed 2010.

    Science.gov (United States)

    Anderson, Jeffrey R; Barrett, Steven F

    2010-01-01

    The three-dimensional rendering of microscopic objects is a difficult and challenging task that often requires specialized image processing techniques. Previous work has been described of a semi-automatic segmentation process of fluorescently stained neurons collected as a sequence of slice images with a confocal laser scanning microscope. Once properly segmented, each individual object can be rendered and studied as a three-dimensional virtual object. This paper describes the work associated with the design and development of Matlab files to create three-dimensional images from the segmented object data previously mentioned. Part of the motivation for this work is to integrate both the segmentation and rendering processes into one software application, providing a seamless transition from the segmentation tasks to the rendering and visualization tasks. Previously these tasks were accomplished on two different computer systems, windows and Linux. This transition basically limits the usefulness of the segmentation and rendering applications to those who have both computer systems readily available. The focus of this work is to create custom Matlab image processing algorithms for object rendering and visualization, and merge these capabilities to the Matlab files that were developed especially for the image segmentation task. The completed Matlab application will contain both the segmentation and rendering processes in a single graphical user interface, or GUI. This process for rendering three-dimensional images in Matlab requires that a sequence of two-dimensional binary images, representing a cross-sectional slice of the object, be reassembled in a 3D space, and covered with a surface. Additional segmented objects can be rendered in the same 3D space. The surface properties of each object can be varied by the user to aid in the study and analysis of the objects. This inter-active process becomes a powerful visual tool to study and understand microscopic objects.

  7. Spatial sound rendering of a playing xylophone for the telepresence application

    DEFF Research Database (Denmark)

    Markovic, Milos; Madsen, Esben; Hoffmann, Pablo F.

    2013-01-01

    xylophone sound rendering is proposed. The recorded signal is processed in order to define multiple virtual sources which are spatially distributed for the auditory width representation of the virtual xylophone. The results of the analyzed recording and rendering techniques are compared in terms...... played at the student's location is required at the teacher’s site. This paper presents a comparison of different recording techniques for a spatial xylophone sound rendering, focusing on the horizontal width of the xylophone auditory image. The directivity pattern of the xylophone was measured...

  8. TractRender: a new generalized 3D medical image visualization and output platform

    Science.gov (United States)

    Hwang, Darryl H.; Tsao, Sinchai; Gajawelli, Niharika; Law, Meng; Lepore, Natasha

    2015-01-01

    Diffusion MRI allows us not only voxelized diffusion characteristics but also the potential to delineate neuronal fiber path through tractography. There is a dearth of flexible open source tractography software programs for visualizing these complicated 3D structures. Moreover, rendering these structures using various shading, lighting, and representations will result in vastly different graphical feel. In addition, the ability to output these objects in various formats increases the utility of this platform. We have created TractRender that leverages openGL features through Matlab, allowing for maximum ease of use but still maintain the flexibility of custom scene rendering.

  9. Methods for Quantifying and Characterizing Errors in Pixel-Based 3D Rendering.

    Science.gov (United States)

    Hagedorn, John G; Terrill, Judith E; Peskin, Adele P; Filliben, James J

    2008-01-01

    We present methods for measuring errors in the rendering of three-dimensional points, line segments, and polygons in pixel-based computer graphics systems. We present error metrics for each of these three cases. These methods are applied to rendering with OpenGL on two common hardware platforms under several rendering conditions. Results are presented and differences in measured errors are analyzed and characterized. We discuss possible extensions of this error analysis approach to other aspects of the process of generating visual representations of synthetic scenes.

  10. Comments on the Cultivation of Innovative Talents in Oral English Teaching Integrated with English Public Speaking%英语演讲:口语课创新人才培养的实践与探索

    Institute of Scientific and Technical Information of China (English)

    吕汝茵

    2014-01-01

    Public speaking in English is a superb skill of language as well as a display of comprehensive abilities. Its integration with Oral English class has produced a delighting and challenging atmosphere to arouse students’ motivation and cultivate their competence of language,critical thinking and psychological quality. Nowadays,the competence of English public speaking has become a demonstration of students’ competitive power,enabling them to get opportunities for their future employment. The results of the survey demonstrate the significance and practical value of English public speaking.%英语演讲是一门高超的语言艺术,同时也是综合素质的展现。将演讲活动融入英语专业口语课堂,营造了综合运用语言的交际环境,激发了英语学习的兴趣和动力,使得这一新型口语课集知识性、趣味性和挑战性于一身,有效地培养了学生的语言能力、批判性思维和心理素质。英语演讲技能已经成为当代大学生竞争力的重要体现;好的口才和演讲技能会给学生带来更多的机遇,有助于他们的职业发展。实践表明,英语演讲教学既贯彻了大学英语专业课程改革的方针,也成为培养学生国际视野、文化素养与创新能力的不可或缺的途径和手段。

  11. The global burden of oral diseases and risks to oral health.

    Science.gov (United States)

    Petersen, Poul Erik; Bourgeois, Denis; Ogawa, Hiroshi; Estupinan-Day, Saskia; Ndiaye, Charlotte

    2005-01-01

    This paper outlines the burden of oral diseases worldwide and describes the influence of major sociobehavioural risk factors in oral health. Despite great improvements in the oral health of populations in several countries, global problems still persist. The burden of oral disease is particularly high for the disadvantaged and poor population groups in both developing and developed countries. Oral diseases such as dental caries, periodontal disease, tooth loss, oral mucosal lesions and oropharyngeal cancers, human immunodeficiency virus/acquired immunodeficiency syndrome (HIV/AIDS)-related oral disease and orodental trauma are major public health problems worldwide and poor oral health has a profound effect on general health and quality of life. The diversity in oral disease patterns and development trends across countries and regions reflects distinct risk profiles and the establishment of preventive oral health care programmes. The important role of sociobehavioural and environmental factors in oral health and disease has been shown in a large number of socioepidemiological surveys. In addition to poor living conditions, the major risk factors relate to unhealthy lifestyles (i.e. poor diet, nutrition and oral hygiene and use of tobacco and alcohol), and limited availability and accessibility of oral health services. Several oral diseases are linked to noncommunicable chronic diseases primarily because of common risk factors. Moreover, general diseases often have oral manifestations (e.g. diabetes or HIV/AIDS). Worldwide strengthening of public health programmes through the implementation of effective measures for the prevention of oral disease and promotion of oral health is urgently needed. The challenges of improving oral health are particularly great in developing countries. PMID:16211157

  12. Oral candidiasis.

    Science.gov (United States)

    Millsop, Jillian W; Fazel, Nasim

    2016-01-01

    Oral candidiasis (OC) is a common fungal disease encountered in dermatology, most commonly caused by an overgrowth of Candida albicans in the mouth. Although thrush is a well-recognized presentation of OC, it behooves clinicians to be aware of the many other presentations of this disease and how to accurately diagnose and manage these cases. The clinical presentations of OC can be broadly classified as white or erythematous candidiasis, with various subtypes in each category. The treatments include appropriate oral hygiene, topical agents, and systemic medications. This review focuses on the various clinical presentations of OC and treatment options.

  13. Oral myiasis

    Directory of Open Access Journals (Sweden)

    Treville Pereira

    2010-01-01

    Full Text Available Myiasis is a relatively rare condition arising from the invasion of body tissues or cavities of living animals or humans by maggots or larvae of certain species of flies. It is an uncommon clinical condition, being more frequent in underdeveloped countries and hot climate regions, and is associated with poor hygiene, suppurative oral lesions; alcoholism and senility. Its diagnosis is made basically by the presence of larvae. The present article reports a case of oral myiasis involving 20 larvae in a patient with neurological deficiency.

  14. Multi-Grained Level of Detail for Rendering Complex Meshes Using a Hierarchical Seamless Texture Atlas

    Energy Technology Data Exchange (ETDEWEB)

    Niski, K; Purnomo, B; Cohen, J

    2006-11-06

    Previous algorithms for view-dependent level of detail provide local mesh refinements either at the finest granularity or at a fixed, coarse granularity. The former provides triangle-level adaptation, often at the expense of heavy CPU usage and low triangle rendering throughput; the latter improves CPU usage and rendering throughput by operating on groups of triangles. We present a new multiresolution hierarchy and associated algorithms that provide adaptive granularity. This multi-grained hierarchy allows independent control of the number of hierarchy nodes processed on the CPU and the number of triangles to be rendered on the GPU. We employ a seamless texture atlas style of geometry image as a GPU-friendly data organization, enabling efficient rendering and GPU-based stitching of patch borders. We demonstrate our approach on both large triangle meshes and terrains with up to billions of vertices.

  15. A point-based rendering approach for real-time interaction on mobile devices

    Institute of Scientific and Technical Information of China (English)

    LIANG XiaoHui; ZHAO QinPing; HE ZhiYing; XIE Ke; LIU YuBo

    2009-01-01

    Mobile device is an Important interactive platform. Due to the limitation of computation, memory, display area and energy, how to realize the efficient and real-time interaction of 3D models based on mobile devices is an important research topic. Considering features of mobile devices, this paper adopts remote rendering mode and point models, and then, proposes a transmission and rendering approach that could interact in real time. First, improved simplification algorithm based on MLS and display resolution of mobile devices is proposed. Then, a hierarchy selection of point models and a QoS transmission control strategy are given based on interest area of operator, interest degree of object in the virtual environment and rendering error. They can save the energy consumption. Finally, the rendering and interaction of point models are completed on mobile devices. The experiments show that our method is efficient.

  16. Three-dimensional CT angiography with volume rendering for the dignosis of multiple intracranial aneurysms

    Institute of Scientific and Technical Information of China (English)

    FANG Bing; LI Tie-lin; ZHANG Jian-min; DUAN Chuan-zhi; WANG Qiu-jing; ZAO Qing-ping

    2004-01-01

    Objective:To evaluate the importance of 3D-CTA with volume rendering for the diagnosis of multiple intracranial aneurysms. Methods: Axial source images were obtained by helical CT scanning and reconstruction of 3D-CTA images was done by volume rendering technique in conjunction with multiplanar reformation. Results: In the past one year,there were 10 patients diagnosed as having multiple intracranial aneurysms by 3D-CTA and altogether 24 aneurysms were visualized,including 10 small aneurysms(≤5mm.Three dimensional CT angiography with volume rendering demonstrated aneurysms very well and provided useful information concerning the site,shape,size and spatial relationship with the surrounding vessels and bone anatomy. Conclusion: Three-dimensional CT angiography with volume rendering is a quick,reliable,and relatively noninvasive method for diagnosing multiple intracranial aneurysms.It delineates detailed aneurysmal morphology,and provides useful information for planning microsurgical approaches.

  17. Flight-appropriate 3D Terrain-rendering Toolkit for Synthetic Vision Project

    Data.gov (United States)

    National Aeronautics and Space Administration — TerraMetrics proposes an SBIR Phase I R/R&D effort to develop a key 3D terrain-rendering technology that provides the basis for successful commercial deployment...

  18. Hybrid Rendering Architecture for Realtime and Photorealistic Simulation of Robot-Assisted Surgery.

    Science.gov (United States)

    Müller, Sebastijan; Bihlmaier, Andreas; Irgenfried, Stephan; Wörn, Heinz

    2016-01-01

    In this paper we present a method for combining realtime and non-realtime (photorealistic) rendering with open source software. Realtime rendering provides sufficient realism and is a good choice for most simulation and regression testing purposes in robot-assisted surgery. However, for proper end-to-end testing of the system, some computer vision algorithms require high fidelity images that capture more minute details of the real scene. One of the central practical obstacles to combining both worlds in a uniform way is creating models that are suitable for both kinds of rendering paradigms. We build a modeling pipeline using open source tools that builds on established, open standards for data exchange. The result is demonstrated through a unified model of the medical OpenHELP phantom used in the Gazebo robotics simulator, which can at the same time be rendered with more visual fidelity in the Cycles raytracer.

  19. Flight-appropriate 3D Terrain-rendering Toolkit for Synthetic Vision Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The TerraBlocksTM 3D terrain data format and terrain-block-rendering methodology provides an enabling basis for successful commercial deployment of...

  20. Processing-in-Memory Enabled Graphics Processors for 3D Rendering

    Energy Technology Data Exchange (ETDEWEB)

    Xie, Chenhao; Song, Shuaiwen; Wang, Jing; Zhang, Weigong; Fu, Xin

    2017-02-06

    The performance of 3D rendering of Graphics Processing Unit that convents 3D vector stream into 2D frame with 3D image effects significantly impact users’ gaming experience on modern computer systems. Due to the high texture throughput in 3D rendering, main memory bandwidth becomes a critical obstacle for improving the overall rendering performance. 3D stacked memory systems such as Hybrid Memory Cube (HMC) provide opportunities to significantly overcome the memory wall by directly connecting logic controllers to DRAM dies. Based on the observation that texel fetches significantly impact off-chip memory traffic, we propose two architectural designs to enable Processing-In-Memory based GPU for efficient 3D rendering.

  1. Functionality and Performance Visualization of the Distributed High Quality Volume Renderer (HVR)

    KAUST Repository

    Shaheen, Sara

    2012-07-01

    Volume rendering systems are designed to provide means to enable scientists and a variety of experts to interactively explore volume data through 3D views of the volume. However, volume rendering techniques are computationally intensive tasks. Moreover, parallel distributed volume rendering systems and multi-threading architectures were suggested as natural solutions to provide an acceptable volume rendering performance for very large volume data sizes, such as Electron Microscopy data (EM). This in turn adds another level of complexity when developing and manipulating volume rendering systems. Given that distributed parallel volume rendering systems are among the most complex systems to develop, trace and debug, it is obvious that traditional debugging tools do not provide enough support. As a consequence, there is a great demand to provide tools that are able to facilitate the manipulation of such systems. This can be achieved by utilizing the power of compute graphics in designing visual representations that reflect how the system works and that visualize the current performance state of the system.The work presented is categorized within the field of software Visualization, where Visualization is used to serve visualizing and understanding various software. In this thesis, a number of visual representations that reflect a number of functionality and performance aspects of the distributed HVR, a high quality volume renderer system that uses various techniques to visualize large volume sizes interactively. This work is provided to visualize different stages of the parallel volume rendering pipeline of HVR. This is along with means of performance analysis through a number of flexible and dynamic visualizations that reflect the current state of the system and enables manipulation of them at runtime. Those visualization are aimed to facilitate debugging, understanding and analyzing the distributed HVR.

  2. The diagnostic contribution of CT volumetric rendering techniques in routine practice

    OpenAIRE

    Perandini Simone; Faccioli N; Zaccarella A; Re T; Mucelli R

    2010-01-01

    Computed tomography (CT) volumetric rendering techniques such as maximum intensity projection (MIP), minimum intensity projection (MinIP), shaded surface display (SSD), volume rendering (VR), and virtual endoscopy (VE) provide added diagnostic capabilities. The diagnostic value of such reconstruction techniques is well documented in literature. These techniques permit the exploration of fine anatomical detail that would be difficult to evaluate using axial reconstructions alone. Although thes...

  3. A learning-based approach for automated quality assessment of computer-rendered images

    Science.gov (United States)

    Zhang, Xi; Agam, Gady

    2012-01-01

    Computer generated images are common in numerous computer graphics applications such as games, modeling, and simulation. There is normally a tradeoff between the time allocated to the generation of each image frame and and the quality of the image, where better quality images require more processing time. Specifically, in the rendering of 3D objects, the surfaces of objects may be manipulated by subdividing them into smaller triangular patches and/or smoothing them so as to produce better looking renderings. Since unnecessary subdivision results in increased rendering time and unnecessary smoothing results in reduced details, there is a need to automatically determine the amount of necessary processing for producing good quality rendered images. In this paper we propose a novel supervised learning based methodology for automatically predicting the quality of rendered images of 3D objects. To perform the prediction we train on a data set which is labeled by human observers for quality. We are then able to predict the quality of renderings (not used in the training) with an average prediction error of roughly 20%. The proposed approach is compared to known techniques and is shown to produce better results.

  4. On-the-fly generation and rendering of infinite cities on the GPU

    KAUST Repository

    Steinberger, Markus

    2014-05-01

    In this paper, we present a new approach for shape-grammar-based generation and rendering of huge cities in real-time on the graphics processing unit (GPU). Traditional approaches rely on evaluating a shape grammar and storing the geometry produced as a preprocessing step. During rendering, the pregenerated data is then streamed to the GPU. By interweaving generation and rendering, we overcome the problems and limitations of streaming pregenerated data. Using our methods of visibility pruning and adaptive level of detail, we are able to dynamically generate only the geometry needed to render the current view in real-time directly on the GPU. We also present a robust and efficient way to dynamically update a scene\\'s derivation tree and geometry, enabling us to exploit frame-to-frame coherence. Our combined generation and rendering is significantly faster than all previous work. For detailed scenes, we are capable of generating geometry more rapidly than even just copying pregenerated data from main memory, enabling us to render cities with thousands of buildings at up to 100 frames per second, even with the camera moving at supersonic speed. © 2014 The Author(s) Computer Graphics Forum © 2014 The Eurographics Association and John Wiley & Sons Ltd. Published by John Wiley & Sons Ltd.

  5. Oral calcitonin

    Directory of Open Access Journals (Sweden)

    Hamdy RC

    2012-09-01

    Full Text Available Ronald C Hamdy,1,2 Dane N Daley11Osteoporosis Center, College of Medicine, East Tennessee State University, 2Veterans Affairs Medical Center, Johnson City, TN, USAAbstract: Calcitonin is a hormone secreted by the C-cells of the thyroid gland in response to elevations of the plasma calcium level. It reduces bone resorption by inhibiting mature active osteoclasts and increases renal calcium excretion. It is used in the management of postmenopausal osteoporosis, Paget's disease of bone, and malignancy-associated hypercalcemia. Synthetic and recombinant calcitonin preparations are available; both have similar pharmacokinetic and pharmacodynamic profiles. As calcitonin is a peptide, the traditional method of administration has been parenteral or intranasal. This hinders its clinical use: adherence with therapy is notoriously low, and withdrawal from clinical trials has been problematic. An oral formulation would be more attractive, practical, and convenient to patients. In addition to its effect on active osteoclasts and renal tubules, calcitonin has an analgesic action, possibly mediated through β-endorphins and the central modulation of pain perception. It also exerts a protective action on cartilage and may be useful in the management of osteoarthritis and possibly rheumatoid arthritis. Oral formulations of calcitonin have been developed using different techniques. The most studied involves drug-delivery carriers such as Eligen® 8-(N-2hydroxy-5-chloro-benzoyl-amino-caprylic acid (5-CNAC (Emisphere Technologies, Cedar Knolls, NJ. Several factors affect the bioavailability and efficacy of orally administered calcitonin, including amount of water used to take the tablet, time of day the tablet is taken, and proximity to intake of a meal. Preliminary results looked promising. Unfortunately, in two Phase III studies, oral calcitonin (0.8 mg with 200 mg 5-CNAC, once a day for postmenopausal osteoporosis and twice a day for osteoarthritis failed to

  6. Oral Cancer Exam

    Medline Plus

    Full Text Available ... Topics > Oral Cancer > Oral Cancer Exam Video Oral Cancer Exam Video This video shows what happens during an oral cancer examination. Quick and painless, the exam can detect ...

  7. Oral Cancer Exam

    Medline Plus

    Full Text Available ... Topics > Oral Cancer > Oral Cancer Exam Video Oral Cancer Exam Video This video shows what happens during an oral cancer examination. Quick and painless, the exam can detect ...

  8. A saúde bucal coletiva na visão do estudante de odontologia: análise de uma experiência Public oral health through the perspective of a dentistry student: an experience analysis

    Directory of Open Access Journals (Sweden)

    Liliane Parreira Tannús Gontijo

    2009-08-01

    Full Text Available Este estudo analisa a contribuição de um projeto pedagógico de saúde bucal coletiva na formação do estudante do curso de graduação em odontologia, na perspectiva dos princípios do Sistema Único de Saúde da promoção em saúde bucal e da atenção em saúde da família, através da visão do aluno, utilizando o enfoque da pesquisa social em abordagem qualitativa. O projeto obteve um índice de aprovação na ordem de 92%. Os aspectos que ofereceram maiores contribuições foram atribuídos às ações desenvolvidas durante o ciclo clínico, seguido pelo ciclo básico. Constituiu-se nos primeiros contatos com aspectos da saúde coletiva e das ciências sociais, demonstrando novas tendências no agir do processo saúde/doença bucal, criando um espaço no processo de ensino-aprendizagem de reflexão crítica sobre a odontologia, na perspectiva preventiva em relação à sedução presente na tradicional atenção clínica curativa. Representa uma experiência simples que vem tentando obter respostas positivas a um dos problemas mais desafiadores para a efetiva implementação do Sistema Único de Saúde - a formação de um profissional preparado e sensibilizado para atender as necessidades de saúde da população e que incorpore a importância e o impacto das dimensões sociais, econômicas, políticas e culturais para a saúde no seu agir.This study aims to analyze the contribution of a Pedagogical Project of Public Oral Health in the development of Dentistry undergraduate students in the perspective of the Brazilian Unified Health System principles, the promotion of oral health and the family health care, through the student’s view using a social research with a qualitative approach. The project obtained an approval index of 92%. The aspects that contributed the most were the actions developed during the clinical cycle followed by the primary cycle. These actions are related to the first contact with public health and social

  9. Image-based haptic roughness estimation and rendering for haptic palpation from in vivo skin image.

    Science.gov (United States)

    Kim, Kwangtaek

    2017-08-08

    Despite the advancement of measuring technologies, there was a need for palpation by hands to be able to better diagnose skin diseases and to learn about the tactile properties of in vivo skin surface. However, directly touching in vivo skin surface can cause secondary infections or damages. Therefore, a technology providing infection- and damage-free skin palpations and precise haptic skin roughness rendering is needed. A multidimensional (2D and 3D) rendering system was developed for multimodal (visual and haptic) rendering that can run with any given in vivo input skin images. For haptic rendering, a commercial haptic device with 3 degrees of freedom (3DOF), Geomagic Touch X, was used. To improve haptic roughness rendering, a force shading algorithm that reduces force discontinuity on rough surface patches but preserves the original roughness values was implemented and applied. In addition, a new image-based roughness estimation method was introduced and the results were compared with haptic roughness results to verify roughness rendering in the system. The developed haptic roughness rendering system will help to diagnose abnormalities on in vivo skin surfaces by virtual haptic palpation with no concern about secondary infections or damages (caused by touch interactions) especially in case of psoriasis, atopic dermatitis, or aging, which results in significant changes of skin roughness. Besides, the system can also be a good tool to examine skin condition changes before and after the use of skin care products (cosmetics). In addition, the proposed 2D skin roughness estimation method can be applied for mobile applications to provide an online roughness estimation tool with a simple phone camera.

  10. Oral Health and Older Adults

    Centers for Disease Control (CDC) Podcasts

    2008-10-27

    This podcast discusses the importance of older adults maintaing good oral health habits. It is primarily targeted to public health and aging services professionals.  Created: 10/27/2008 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 10/27/2008.

  11. 3-D volume rendering visualization for calculated distributions of diesel spray; Diesel funmu kyodo suchi keisan kekka no sanjigen volume rendering hyoji

    Energy Technology Data Exchange (ETDEWEB)

    Yoshizaki, T.; Imanishi, H.; Nishida, K.; Yamashita, H.; Hiroyasu, H.; Kaneda, K. [Hiroshima University, Hiroshima (Japan)

    1997-10-01

    Three dimensional visualization technique based on volume rendering method has been developed in order to translate calculated results of diesel combustion simulation into realistically spray and flame images. This paper presents an overview of diesel combustion model which has been developed at Hiroshima University, a description of the three dimensional visualization technique, and some examples of spray and flame image generated by this visualization technique. 8 refs., 8 figs., 1 tab.

  12. Oral dirofilariasis

    Directory of Open Access Journals (Sweden)

    R S Desai

    2015-01-01

    Full Text Available Dirofilaria is parasitic nematodes of domestic and wild animals that can infect humans accidentally via vectors. Its occurrence in the oral cavity is extremely rare. The most frequent presentation of human dirofilariasis is a single submucosal nodule without signs of inflammation. We hereby, report a case of human dirofilariasis affecting the buccal mucosa in a 32-year-old farmer caused by D. repens.

  13. Oral leiomyomas.

    Science.gov (United States)

    Damm, D D; Neville, B W

    1979-04-01

    Oral leiomyomas are considered to be rare neoplasms, but they may be encountered more frequently than generally believed. Three types of leiomyomas are commonly described: solid leiomyomas, angiomyomas, and epithelioid leiomyomas. Three cases of solid leiomyoma are presented, all of which occurred in the anterior mandibular mucobuccal fold. Leiomyomas can be easily confused with other spindle-cell tumors. The necessity of using special stains, especially Mallory's phosphotungstic acid hematoxylin, is discussed.

  14. ORALLY DISINTEGRATING TABLETS: A REVIEW

    Directory of Open Access Journals (Sweden)

    Mudgal Vinod Kumar

    2011-04-01

    Full Text Available Orally disintegrating tablets (ODTs are gaining prominence as new drug delivery systems and emerged as one of the popular and widely accepted dosage forms, especially for the pediatric and geriatric patients. To obviate the problem of dysphagia and to improve patient compliance, ODTs have gained considerable attention as preferred alternatives to conventional tablet and capsule formulations. Various scientific techniques including freeze drying, moulding, spray drying, sublimation, direct compression, cotton candy process, mass extrusion, melt granulation etc. have been employed for the development of ODTs. These techniques render the disintegration of tablet rapidly and dissolve in mouth without chewing or additional water intake. The current article is focused on ideal characteristics, significant features, patented technologies, formulation aspects including the use of superdisintegrants. Various marketed preparations along with numerous scientific advancements made so far in this avenue have also been discussed.

  15. Feature-Adaptive Rendering of Loop Subdivision Surfaces on Modern GPUs

    Institute of Scientific and Technical Information of China (English)

    黄韵岑; 冯结青; 崔元敏; 杨宝光

    2014-01-01

    We present a novel approach for real-time rendering Loop subdivision surfaces on modern graphics hardware. Our algorithm evaluates both positions and normals accurately, thus providing the true Loop subdivision surface. The core idea is to recursively refine irregular patches using a GPU compute kernel. All generated regular patches are then directly evaluated and rendered using the hardware tessellation unit. Our approach handles triangular control meshes of arbitrary topologies and incorporates common subdivision surface features such as semi-sharp creases and hierarchical edits. While surface rendering is accurate up to machine precision, we also enforce a consistent bitwise evaluation of positions and normals at patch boundaries. This is particularly useful in the context of displacement mapping which strictly requires matching surface normals. Furthermore, we incorporate efficient level-of-detail rendering where subdivision depth and tessellation density can be adjusted on-the-fly. Overall, our algorithm provides high-quality results at real-time frame rates, thus being ideally suited to interactive rendering applications such as video games or authoring tools.

  16. Direct Visuo-Haptic 4D Volume Rendering Using Respiratory Motion Models.

    Science.gov (United States)

    Fortmeier, Dirk; Wilms, Matthias; Mastmeyer, Andre; Handels, Heinz

    2015-01-01

    This article presents methods for direct visuo-haptic 4D volume rendering of virtual patient models under respiratory motion. Breathing models are computed based on patient-specific 4D CT image data sequences. Virtual patient models are visualized in real-time by ray casting based rendering of a reference CT image warped by a time-variant displacement field, which is computed using the motion models at run-time. Furthermore, haptic interaction with the animated virtual patient models is provided by using the displacements computed at high rendering rates to translate the position of the haptic device into the space of the reference CT image. This concept is applied to virtual palpation and the haptic simulation of insertion of a virtual bendable needle. To this aim, different motion models that are applicable in real-time are presented and the methods are integrated into a needle puncture training simulation framework, which can be used for simulated biopsy or vessel puncture in the liver. To confirm real-time applicability, a performance analysis of the resulting framework is given. It is shown that the presented methods achieve mean update rates around 2,000 Hz for haptic simulation and interactive frame rates for volume rendering and thus are well suited for visuo-haptic rendering of virtual patients under respiratory motion.

  17. On-line Free-viewpoint Video: From Single to Multiple View Rendering

    Institute of Scientific and Technical Information of China (English)

    Vincent Nozick; Hideo Saito

    2008-01-01

    In recent years, many image-based rendering techniques have advanced from static to dynamic scenes and thus become video-based rendering (VBR) methods. But actually, only a few of them can render new views on-line. We present a new VBR system that creates new views of a live dynamic scene. This system provides high quality images and does not require any background subtraction. Our method follows a plane-sweep approach and reaches real-time rendering using consumer graphic hardware, graphics processing unit (GPU). Only one computer is used for both acquisition and rendering. The video stream acquisition is performed by at least 3 webcams. We propose an additional video stream management that extends the number of webcams to 10 or more. These considerations make our system low-cost and hence accessible for everyone. We also present an adaptation of our plane-sweep method to create simultaneously multiple views of the scene in real-time. Our system is especially designed for stereovision using autostereoscopic displays. The new views are computed from 4 webcams connected to a computer and are compressed in order to be transfered to a mobile phone. Using CPU programming, our method provides up to 16 images of the scene in real-time. The use of both GPU and CPU makes this method work on only one consumer grade computer.

  18. Issues related to diagnosing oral lichen planus among oral pathologists in South India: A pilot survey.

    Science.gov (United States)

    Sanketh, D Sharathkumar; Srinivasan, Samuel Raj; Patil, Shankargouda; Ranganathan, Kannan

    2016-10-26

    In the present study, we simulated clinical scenarios by explicitly describing the history and clinical and histological features of hypothetical patients presenting with oral lichen planus (OLP), oral lichenoid lesion, and epithelial dysplasia in a self-designed questionnaire. By doing so, we aimed to elicit a diagnosis from oral pathologists and trainees, analyze their responses, appraise issues, and propose solutions regarding the diagnosis of OLP. The questionnaire was distributed to 100 oral pathologists and trainees in South India. Six questions were designed to assess awareness of the diagnostic aspects of OLP. Ten questions were hypothetical clinical scenarios (HCS) devised to evaluate respondents' knowledge of diagnostic guidelines and the criteria used by the respondents to render a diagnosis. There were 60 of 100 responses to the questionnaire. More than half the respondents were aware of the World Health Organization and modified guidelines of OLP. We observed considerable variations in diagnoses for the HCS. Our study illustrates the ambiguity in rendering an accurate diagnosis, despite adequate guidelines. Based on the responses for the HCS, we hypothesized that changes in the distribution (unilateral or bilateral) and clinical characteristic of OLP, and habits of patients, have a significant bearing on the clinical and final diagnoses of the lesion. © 2016 John Wiley & Sons Australia, Ltd.

  19. ORAL MANIFESTATIONS OF HEPATITIS C VIRUS

    Directory of Open Access Journals (Sweden)

    Vladimir E. Panov

    2013-10-01

    Full Text Available Hepatitis C virus (HCV infection is a serious public health problem. New infections continue to occur, and morbidity and mortality are increasing. The date reported that 3% of infected world population are affected.Morbidity associated with hepatitis C virus infection can involve a variety of extrahepatic conditions including the oral region. Some of the oral manifestation are oral disease like lichen planus and Sjögren-like sialadenitis , other affects the dental status, and side effect of the virus therapy. The aim of this review is to summarize the oral sings, accompanying hepatitis C virus.

  20. 42 CFR 493.1220 - Condition: Oral pathology.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Condition: Oral pathology. 493.1220 Section 493....1220 Condition: Oral pathology. If the laboratory provides services in the subspecialty of Oral pathology, the laboratory must meet the requirements specified in §§ 493.1230 through 493.1256, and §§...

  1. Rendering-oriented multiview video coding based on chrominance information reconstruction

    Science.gov (United States)

    Shao, Feng; Yu, Mei; Jiang, Gangyi; Zhang, Zhaoyang

    2010-05-01

    Three-dimensional (3-D) video systems are expected to be a next-generation visual application. Since multiview video for 3-D video systems is composed of color and associated depth information, its huge requirement for data storage and transmission is an important problem. We propose a rendering-oriented multiview video coding (MVC) method based on chrominance information reconstruction that incorporates the rendering technique into the MVC process. The proposed method discards certain chrominance information to reduce bitrates, and performs reasonable bitrate allocation between color and depth videos. At the decoder, a chrominance reconstruction algorithm is presented to achieve accurate reconstruction by warping the neighboring views and colorizing the luminance-only pixels. Experimental results show that the proposed method can save nearly 20% on bitrates against the results without discarding the chrominance information. Moreover, under a fixed bitrate budget, the proposed method can greatly improve the rendering quality.

  2. Frequency domain volume rendering by the wavelet X-ray transform.

    Science.gov (United States)

    Westenberg, M A; Roerdink, J M

    2000-01-01

    We describe a wavelet based X-ray rendering method in the frequency domain with a smaller time complexity than wavelet splatting. Standard Fourier volume rendering is summarized and interpolation and accuracy issues are briefly discussed. We review the implementation of the fast wavelet transform in the frequency domain. The wavelet X-ray transform is derived, and the corresponding Fourier-wavelet volume rendering algorithm (FWVR) is introduced, FWVR uses Haar or B-spline wavelets and linear or cubic spline interpolation. Various combinations are tested and compared with wavelet splatting (WS). We use medical MR and CT scan data, as well as a 3-D analytical phantom to assess the accuracy, time complexity, and memory cost of both FWVR and WS. The differences between both methods are enumerated.

  3. Evaluation and Improvement of the CIE Metameric and Colour Rendering Index

    Directory of Open Access Journals (Sweden)

    Radovan Slavuj

    2015-12-01

    Full Text Available All artificial light sources are intended to simulate daylight and its properties of color rendering or ability of colour discrimination. Two indices, defined by the CIE, are used to quantify quality of the artificial light sources. First is Color Rendering Index which quantifies ability of light sources to render colours and other is the Metemerism Index which describes metamerism potential of given light source. Calculation of both indices are defined by CIE and has been a subject of discussion and change in past. In this work particularly, the problem of sample number and type used in calculation is addressed here and evaluated. It is noticed that both indices depends on the choice and sample number and that they should be determined based on application.

  4. 3-D wavelet compression and progressive inverse wavelet synthesis rendering of concentric mosaic.

    Science.gov (United States)

    Luo, Lin; Wu, Yunnan; Li, Jin; Zhang, Ya-Qin

    2002-01-01

    Using an array of photo shots, the concentric mosaic offers a quick way to capture and model a realistic three-dimensional (3-D) environment. We compress the concentric mosaic image array with a 3-D wavelet transform and coding scheme. Our compression algorithm and bitstream syntax are designed to ensure that a local view rendering of the environment requires only a partial bitstream, thereby eliminating the need to decompress the entire compressed bitstream before rendering. By exploiting the ladder-like structure of the wavelet lifting scheme, the progressive inverse wavelet synthesis (PIWS) algorithm is proposed to maximally reduce the computational cost of selective data accesses on such wavelet compressed datasets. Experimental results show that the 3-D wavelet coder achieves high-compression performance. With the PIWS algorithm, a 3-D environment can be rendered in real time from a compressed dataset.

  5. Spatial sound rendering of a playing xylophone for the telepresence application

    DEFF Research Database (Denmark)

    Markovic, Milos; Madsen, Esben; Hoffmann, Pablo F.

    2013-01-01

    and spatial properties of the sound field created by a xylophone as a distributed sound source were analyzed. Xylophone recordings were performed using different microphone configurations: one and two-channel recording setups are implemented. One-channel recording technique with binaural synthesis for spatial...... played at the student's location is required at the teacher’s site. This paper presents a comparison of different recording techniques for a spatial xylophone sound rendering, focusing on the horizontal width of the xylophone auditory image. The directivity pattern of the xylophone was measured...... xylophone sound rendering is proposed. The recorded signal is processed in order to define multiple virtual sources which are spatially distributed for the auditory width representation of the virtual xylophone. The results of the analyzed recording and rendering techniques are compared in terms...

  6. Physics Based Modeling and Rendering of Vegetation in the Thermal Infrared

    Science.gov (United States)

    Smith, J. A.; Ballard, J. R., Jr.

    1999-01-01

    We outline a procedure for rendering physically-based thermal infrared images of simple vegetation scenes. Our approach incorporates the biophysical processes that affect the temperature distribution of the elements within a scene. Computer graphics plays a key role in two respects. First, in computing the distribution of scene shaded and sunlit facets and, second, in the final image rendering once the temperatures of all the elements in the scene have been computed. We illustrate our approach for a simple corn scene where the three-dimensional geometry is constructed based on measured morphological attributes of the row crop. Statistical methods are used to construct a representation of the scene in agreement with the measured characteristics. Our results are quite good. The rendered images exhibit realistic behavior in directional properties as a function of view and sun angle. The root-mean-square error in measured versus predicted brightness temperatures for the scene was 2.1 deg C.

  7. Showing their true colors: a practical approach to volume rendering from serial sections

    Directory of Open Access Journals (Sweden)

    Metscher Brian D

    2010-04-01

    Full Text Available Abstract Background In comparison to more modern imaging methods, conventional light microscopy still offers a range of substantial advantages with regard to contrast options, accessible specimen size, and resolution. Currently, tomographic image data in particular is most commonly visualized in three dimensions using volume rendering. To date, this method has only very rarely been applied to image stacks taken from serial sections, whereas surface rendering is still the most prevalent method for presenting such data sets three-dimensionally. The aim of this study was to develop standard protocols for volume rendering of image stacks of serial sections, while retaining the benefits of light microscopy such as resolution and color information. Results Here we provide a set of protocols for acquiring high-resolution 3D images of diverse microscopic samples through volume rendering based on serial light microscopical sections using the 3D reconstruction software Amira (Visage Imaging Inc.. We overcome several technical obstacles and show that these renderings are comparable in quality and resolution to 3D visualizations using other methods. This practical approach for visualizing 3D micro-morphology in full color takes advantage of both the sub-micron resolution of light microscopy and the specificity of histological stains, by combining conventional histological sectioning techniques, digital image acquisition, three-dimensional image filtering, and 3D image manipulation and visualization technologies. Conclusions We show that this method can yield "true"-colored high-resolution 3D views of tissues as well as cellular and sub-cellular structures and thus represents a powerful tool for morphological, developmental, and comparative investigations. We conclude that the presented approach fills an important gap in the field of micro-anatomical 3D imaging and visualization methods by combining histological resolution and differentiation of details with

  8. ACCELERATION RENDERING METHOD ON RAY TRACING WITH ANGLE COMPARISON AND DISTANCE COMPARISON

    Directory of Open Access Journals (Sweden)

    Liliana liliana

    2007-01-01

    Full Text Available In computer graphics applications, to produce realistic images, a method that is often used is ray tracing. Ray tracing does not only model local illumination but also global illumination. Local illumination count ambient, diffuse and specular effects only, but global illumination also count mirroring and transparency. Local illumination count effects from the lamp(s but global illumination count effects from other object(s too. Objects that are usually modeled are primitive objects and mesh objects. The advantage of mesh modeling is various, interesting and real-like shape. Mesh contains many primitive objects like triangle or square (rare. A problem in mesh object modeling is long rendering time. It is because every ray must be checked with a lot of triangle of the mesh. Added by ray from other objects checking, the number of ray that traced will increase. It causes the increasing of rendering time. To solve this problem, in this research, new methods are developed to make the rendering process of mesh object faster. The new methods are angle comparison and distance comparison. These methods are used to reduce the number of ray checking. The rays predicted will not intersect with the mesh, are not checked weather the ray intersects the mesh. With angle comparison, if using small angle to compare, the rendering process will be fast. This method has disadvantage, if the shape of each triangle is big, some triangles will be corrupted. If the angle to compare is bigger, mesh corruption can be avoided but the rendering time will be longer than without comparison. With distance comparison, the rendering time is less than without comparison, and no triangle will be corrupted.

  9. Construction and Evaluation of an Ultra Low Latency Frameless Renderer for VR.

    Science.gov (United States)

    Friston, Sebastian; Steed, Anthony; Tilbury, Simon; Gaydadjiev, Georgi

    2016-04-01

    Latency - the delay between a user's action and the response to this action - is known to be detrimental to virtual reality. Latency is typically considered to be a discrete value characterising a delay, constant in time and space - but this characterisation is incomplete. Latency changes across the display during scan-out, and how it does so is dependent on the rendering approach used. In this study, we present an ultra-low latency real-time ray-casting renderer for virtual reality, implemented on an FPGA. Our renderer has a latency of ~1 ms from 'tracker to pixel'. Its frameless nature means that the region of the display with the lowest latency immediately follows the scan-beam. This is in contrast to frame-based systems such as those using typical GPUs, for which the latency increases as scan-out proceeds. Using a series of high and low speed videos of our system in use, we confirm its latency of ~1 ms. We examine how the renderer performs when driving a traditional sequential scan-out display on a readily available HMO, the Oculus Rift OK2. We contrast this with an equivalent apparatus built using a GPU. Using captured human head motion and a set of image quality measures, we assess the ability of these systems to faithfully recreate the stimuli of an ideal virtual reality system - one with a zero latency tracker, renderer and display running at 1 kHz. Finally, we examine the results of these quality measures, and how each rendering approach is affected by velocity of movement and display persistence. We find that our system, with a lower average latency, can more faithfully draw what the ideal virtual reality system would. Further, we find that with low display persistence, the sensitivity to velocity of both systems is lowered, but that it is much lower for ours.

  10. Showing their true colors: a practical approach to volume rendering from serial sections.

    Science.gov (United States)

    Handschuh, Stephan; Schwaha, Thomas; Metscher, Brian D

    2010-04-21

    In comparison to more modern imaging methods, conventional light microscopy still offers a range of substantial advantages with regard to contrast options, accessible specimen size, and resolution. Currently, tomographic image data in particular is most commonly visualized in three dimensions using volume rendering. To date, this method has only very rarely been applied to image stacks taken from serial sections, whereas surface rendering is still the most prevalent method for presenting such data sets three-dimensionally. The aim of this study was to develop standard protocols for volume rendering of image stacks of serial sections, while retaining the benefits of light microscopy such as resolution and color information. Here we provide a set of protocols for acquiring high-resolution 3D images of diverse microscopic samples through volume rendering based on serial light microscopical sections using the 3D reconstruction software Amira (Visage Imaging Inc.). We overcome several technical obstacles and show that these renderings are comparable in quality and resolution to 3D visualizations using other methods. This practical approach for visualizing 3D micro-morphology in full color takes advantage of both the sub-micron resolution of light microscopy and the specificity of histological stains, by combining conventional histological sectioning techniques, digital image acquisition, three-dimensional image filtering, and 3D image manipulation and visualization technologies. We show that this method can yield "true"-colored high-resolution 3D views of tissues as well as cellular and sub-cellular structures and thus represents a powerful tool for morphological, developmental, and comparative investigations. We conclude that the presented approach fills an important gap in the field of micro-anatomical 3D imaging and visualization methods by combining histological resolution and differentiation of details with 3D rendering of whole tissue samples. We demonstrate the

  11. Publicity and public relations

    Science.gov (United States)

    Fosha, Charles E.

    1990-01-01

    This paper addresses approaches to using publicity and public relations to meet the goals of the NASA Space Grant College. Methods universities and colleges can use to publicize space activities are presented.

  12. Mastering Mental Ray Rendering Techniques for 3D and CAD Professionals

    CERN Document Server

    O'Connor, Jennifer

    2010-01-01

    Proven techniques for using mental ray effectively. If you're a busy artist seeking high-end results for your 3D, design, or architecture renders using mental ray, this is the perfect book for you. It distills the highly technical nature of rendering into easy-to-follow steps and tutorials that you can apply immediately to your own projects. The book uses 3ds Max and 3ds Max Design to show the integration with mental ray, but users of any 3D or CAD software can learn valuable techniques for incorporating mental ray into their pipelines.: Takes you under the hood of mental ray, a stand-alone or

  13. User evaluation of eight led light sources with different special colour rendering indices R9

    DEFF Research Database (Denmark)

    Markvart, Jakob; Iversen, Anne; Logadottir, Asta

    2013-01-01

    In this study we evaluated the influence of the special colour rendering index R9 on subjective red colour perception and Caucasian skin appearance among untrained test subjects. The light sources tested are commercially available LED based light sources with similar correlated colour temperature...... and general colour rendering index, but with varying R9. It was found that the test subjects in general are more positive towards light sources with higher R9. The shift from a majority of negative responses to a majority of positive responses is found to occur at R9 values of ~20....

  14. USER EVALUATION OF EIGHT LED LIGHT SOURCES WITH DIFFERENTSPECIAL COLOUR RENDERING INDICES R9

    DEFF Research Database (Denmark)

    Markvart, Jakob; Iversen, Anne; Logadóttir, Ásta;

    2013-01-01

    In this study we evaluated the influence of the special colour rendering index R9 on subjective red colour perception and Caucasian skin appearance among untrained test subjects. The light sources tested are commercially available LED based light sources with similar correlated colour temperature...... and general colour rendering index, but with varying R9. It was found that the test subjects in general are more positive towards light sources with higher R9. The shift from a majority of negative responses to a majority of positive responses is found to occur at R9 values of ~20....

  15. Towards the Availability of the Distributed Cluster Rendering System: Automatic Modeling and Verification

    DEFF Research Database (Denmark)

    Wang, Kemin; Jiang, Zhengtao; Wang, Yongbin;

    2012-01-01

    , whenever the number of node-n and related parameters vary, we can create the PRISM model file rapidly and then we can use PRISM model checker to verify ralated system properties. At the end of this study, we analyzed and verified the availability distributions of the Distributed Cluster Rendering System......In this study, we proposed a Continuous Time Markov Chain Model towards the availability of n-node clusters of Distributed Rendering System. It's an infinite one, we formalized it, based on the model, we implemented a software, which can automatically model with PRISM language. With the tool...

  16. Color Temperature Tunable White-Light LED Cluster with Extrahigh Color Rendering Index

    OpenAIRE

    Minhao Zhang; Yu Chen; Guoxing He

    2014-01-01

    The correlated color temperature (CCT) tunable white-light LED cluster with extrahigh color rendering property has been found by simulation and fabricated, which consists of three WW LEDs (CCT = 3183 K), one red LED (634.1 nm), one green LED (513.9 nm), and one blue LED (456.2 nm). The experimental results show that this cluster can realize the CCT tunable white-lights with a color rendering index (CRI) above 93, special CRI R9 for strong red above 90, average value of the special CRIs of R9...

  17. Acoustic Holographic Rendering with Two-dimensional Metamaterial-based Passive Phased Array

    Science.gov (United States)

    Xie, Yangbo; Shen, Chen; Wang, Wenqi; Li, Junfei; Suo, Dingjie; Popa, Bogdan-Ioan; Jing, Yun; Cummer, Steven A.

    2016-01-01

    Acoustic holographic rendering in complete analogy with optical holography are useful for various applications, ranging from multi-focal lensing, multiplexed sensing and synthesizing three-dimensional complex sound fields. Conventional approaches rely on a large number of active transducers and phase shifting circuits. In this paper we show that by using passive metamaterials as subwavelength pixels, holographic rendering can be achieved without cumbersome circuitry and with only a single transducer, thus significantly reducing system complexity. Such metamaterial-based holograms can serve as versatile platforms for various advanced acoustic wave manipulation and signal modulation, leading to new possibilities in acoustic sensing, energy deposition and medical diagnostic imaging. PMID:27739472

  18. Direct volumetric rendering based on point primitives in OpenGL.

    Science.gov (United States)

    da Rosa, André Luiz Miranda; de Almeida Souza, Ilana; Yuuji Hira, Adilson; Zuffo, Marcelo Knörich

    2006-01-01

    The aim of this project is to present a renderization by software algorithm of acquired volumetric data. The algorithm was implemented in Java language and the LWJGL graphical library was used, allowing the volume renderization by software and thus preventing the necessity to acquire specific graphical boards for the 3D reconstruction. The considered algorithm creates a model in OpenGL, through point primitives, where each voxel becomes a point with the color values related to this pixel position in the corresponding images.

  19. DIRECT VOXEL-PROJECTION FOR VOLUMETRIC DATA RENDERING IN MEDICAL IMAGERY

    Institute of Scientific and Technical Information of China (English)

    吕忆松; 陈亚珠; 郭玉红

    2002-01-01

    The volumetric rendering of 3-D medical image data is very effective method for communication about radiological studies to clinicians. Algorithms that produce images with artifacts and inaccuracies are not clinically useful. This paper proposed a direct voxel-projection algorithm to implement volumetric data rendering. Using this algorithm, arbitrary volume rotation, transparent and cutaway views are generated satisfactorily. Compared with the existing raytracing methods, it improves the projection image quality greatly. Some experimental results about real medical CT image data demonstrate the advantages and fidelity of the proposed algorithm.

  20. Digital representations of the real world how to capture, model, and render visual reality

    CERN Document Server

    Magnor, Marcus A; Sorkine-Hornung, Olga; Theobalt, Christian

    2015-01-01

    Create Genuine Visual Realism in Computer Graphics Digital Representations of the Real World: How to Capture, Model, and Render Visual Reality explains how to portray visual worlds with a high degree of realism using the latest video acquisition technology, computer graphics methods, and computer vision algorithms. It explores the integration of new capture modalities, reconstruction approaches, and visual perception into the computer graphics pipeline.Understand the Entire Pipeline from Acquisition, Reconstruction, and Modeling to Realistic Rendering and ApplicationsThe book covers sensors fo

  1. A graphics pipeline for directtly rendering 3D scenes on web browsers

    OpenAIRE

    Pinto, Edgar Marchiel

    2009-01-01

    In this dissertation we propose a graphics pipeline, in the form of aWeb3D graphics library, for directly rendering 3D scenes on web browsers. This open sourceWeb3D graphics library is called Glypher3D. It is entirely written in JavaScript (together with the HTML5 canvas element) and aims at enabling the creation, manipulation and rendering of 3D contents within a browser, without the need of installing any type of web browser plug-ins or add-ons (i.e. it does not take advantag...

  2. Oral contraceptives.

    Science.gov (United States)

    Maclennan, A H

    1987-12-01

    Over 60 million women use highly efficient and safe modern combined oral contraceptives (OCs) every day. A women who takes the oral contraceptive for 5 years before the age of 30 will actually live 12 days longer, although a woman taking the pill for the 1st time for 5 years after the age of 30 will have her life span reduced on the average by 80 days. OC related morbidity and mortality mostly occur in women over 35 who smoke. Combined low dose OCs are safe for women who do not smoke, at least to 45 years of age and probably to the menopause. The prescription of OCs is also safe to the young adolescent. The pill does not interfere with maturation of the hypothalamic-pituitary ovarian axis and does not increase the incidence of amenorrhoea, oligomenorrhoea or infertility in later life. Patients with contraindications to estrogen therapy are excluded from OC use (history of thromboembolism, major heart disease, liver disease, breast cancer). Low-dose (30-35 mcg estrogen-containing monophasic or triphasic) pills are recommended. Combined oral contraceptives contain either ethinyl estradiol (1.7 to 2 times more potent) or mestranol. After absorption the progestagens, norethisterone acetate, ethynodiol diacetate and lynoestrenol are all metabolized to norethisterone. The progestagen-only pill has about a 2% failure rate and poorer cycle control than the combined pill, but it lacks estrogenic, progestagenic and androgenic side effects. This pill is suitable for the lactating mother, for smokers over 35, for hypertensive patients, and for those with a history of thrombosis. The efficacy of the progestagen-only pill is restored in 3 days of pill taking. Postcoital contraception is an alternative: treatment can be given for at least 72 hours after intercourse. The Yuzpe method calls for the patient to take 2 combined oral contraceptive tablets containing levonorgestrel and ethinyl estradiol (Eugynon or Ovral) followed by a further 2 tablets 12 hours later. This regimen

  3. Fluoride and Oral Health.

    Science.gov (United States)

    O'Mullane, D M; Baez, R J; Jones, S; Lennon, M A; Petersen, P E; Rugg-Gunn, A J; Whelton, H; Whitford, G M

    2016-06-01

    The discovery during the first half of the 20th century of the link between natural fluoride, adjusted fluoride levels in drinking water and reduced dental caries prevalence proved to be a stimulus for worldwide on-going research into the role of fluoride in improving oral health. Epidemiological studies of fluoridation programmes have confirmed their safety and their effectiveness in controlling dental caries. Major advances in our knowledge of how fluoride impacts the caries process have led to the development, assessment of effectiveness and promotion of other fluoride vehicles including salt, milk, tablets, toothpaste, gels and varnishes. In 1993, the World Health Organization convened an Expert Committee to provide authoritative information on the role of fluorides in the promotion of oral health throughout the world (WHO TRS 846, 1994). This present publication is a revision of the original 1994 document, again using the expertise of researchers from the extensive fields of knowledge required to successfully implement complex interventions such as the use of fluorides to improve dental and oral health. Financial support for research into the development of these new fluoride strategies has come from many sources including government health departments as well as international and national grant agencies. In addition, the unique role which industry has played in the development, formulation, assessment of effectiveness and promotion of the various fluoride vehicles and strategies is noteworthy. This updated version of 'Fluoride and Oral Health' has adopted an evidence-based approach to its commentary on the different fluoride vehicles and strategies and also to its recommendations. In this regard, full account is taken of the many recent systematic reviews published in peer reviewed literature.

  4. Probiotics and oral health effects in children

    DEFF Research Database (Denmark)

    Twetman, Svante; Stecksén-Blicks, Christina

    2008-01-01

    BACKGROUND: Probiotics are living micro-organisms added to food which beneficially affect the host by improving its intestinal microbial balance. OBJECTIVE: This paper aims to present a general background on probiotics and its health effects in children, and to examine the evidence for oral...... colonization and the possible impact on oral health in children and young adults. METHODS: For delivery and general health effects, recent systematic reviews, meta-analyses, and other relevant papers were used. Concerning oral installation and oral effects, a broad search for publications in English...... of daily consumption of probiotic milk. CONCLUSION: Bacteriotheraphy in the form of probiotic bacteria with an inhibitory effect on oral pathogens is a promising concept, especially in childhood, but this may not necessarily lead to improved oral health. Further placebo controlled trials that assess...

  5. Dynamic Resolution in GPU-Accelerated Volume Rendering to Autostereoscopic Multiview Lenticular Displays

    Directory of Open Access Journals (Sweden)

    Daniel Ruijters

    2008-09-01

    Full Text Available The generation of multiview stereoscopic images of large volume rendered data demands an enormous amount of calculations. We propose a method for hardware accelerated volume rendering of medical data sets to multiview lenticular displays, offering interactive manipulation throughout. The method is based on buffering GPU-accelerated direct volume rendered visualizations of the individual views from their respective focal spot positions, and composing the output signal for the multiview lenticular screen in a second pass. This compositing phase is facilitated by the fact that the view assignment per subpixel is static, and therefore can be precomputed. We decoupled the resolution of the individual views from the resolution of the composited signal, and adjust the resolution on-the-fly, depending on the available processing resources, in order to maintain interactive refresh rates. The optimal resolution for the volume rendered views is determined by means of an analysis of the lattice of the output signal for the lenticular screen in the Fourier domain.

  6. 31 CFR 545.514 - Payments for services rendered by the Taliban to aircraft.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Payments for services rendered by the Taliban to aircraft. 545.514 Section 545.514 Money and Finance: Treasury Regulations Relating to Money and..., or supply, directly or indirectly, of goods, software, technology, and services to ensure the safety...

  7. ADMINISTRATIVE REGULATION IN RENDERING CIVIL SERVICE IN THE SYSTEM OF LEGAL ENACTMENTS

    Directory of Open Access Journals (Sweden)

    Valeria V. Lich

    2013-01-01

    Full Text Available The article studies the place of administrative regulation in rendering civil service in the hierarchy of the Russian laws and regulations. The problem whether to consider administrative regulation in civil service as a departmental law, issued by federal authorities, or as a clarification to federal laws and an instruction on its execution, is discussed in the article.

  8. 27 CFR 19.983 - Spirits rendered unfit for beverage use in the production process.

    Science.gov (United States)

    2010-04-01

    ... beverage use in the production process. 19.983 Section 19.983 Alcohol, Tobacco Products and Firearms... the production process. Where spirits are rendered unfit for beverage use before removal from the production system, the proprietor shall enter into the production records, in addition to the quantity...

  9. Moisture transport properties of brick – comparison of exposed, impregnated and rendered brick

    DEFF Research Database (Denmark)

    Hansen, Tessa Kvist; Bjarløv, Søren Peter; Peuhkuri, Ruut

    2016-01-01

    In regards to internal insulation of preservation worthy brick façades, external moisture sources, such as wind-driven rain exposure, inevitably has an impact on moisture conditions within the masonry construction. Surface treatments, such as hydrophobation or render, may remedy the impacts...

  10. APEX (Air Pollution Exercise) Volume 9: Industrialist's Manual No. 5, Caesar's Rendering Plant.

    Science.gov (United States)

    Environmental Protection Agency, Research Triangle Park, NC. Office of Manpower Development.

    The Industrialist's Manual No. 5, Caesar's Rendering Plant is part of a set of 21 manuals (AA 001 009-001 029) used in APEX (Air Pollution Exercise), a computerized college and professional level "real world" game simulation of a community with urban and rural problems, industrial activities, and air pollution difficulties. The first two sections,…

  11. 3D colour visualization of label images using volume rendering techniques.

    Science.gov (United States)

    Vandenhouten, R; Kottenhoff, R; Grebe, R

    1995-01-01

    Volume rendering methods for the visualization of 3D image data sets have been developed and collected in a C library. The core algorithm consists of a perspective ray casting technique for a natural and realistic view of the 3D scene. New edge operator shading methods are employed for a fast and information preserving representation of surfaces. Control parameters of the algorithm can be tuned to have either smoothed surfaces or a very detailed rendering of the geometrical structure. Different objects can be distinguished by different colours. Shadow ray tracing has been implemented to improve the realistic impression of the 3D image. For a simultaneous representation of objects in different depths, hiding each other, two types of transparency mode are used (wireframe and glass transparency). Single objects or groups of objects can be excluded from the rendering (peeling). Three orthogonal cutting planes or one arbitrarily placed cutting plane can be applied to the rendered objects in order to get additional information about inner structures, contours, and relative positions.

  12. Using Opaque Image Blur for Real-Time Depth-of-Field Rendering

    DEFF Research Database (Denmark)

    Kraus, Martin

    2011-01-01

    the opacity of all pixels to avoid artifacts at the cost of physically less accurate but still plausible rendering results. The proposed filter is named “opaque image blur” and is based on a glow filter that is applied to the alpha channel. We present a highly efficient GPU-based pyramid algorithm...

  13. 3D-TV Rendering on a Multiprocessor System on a Chip

    NARCIS (Netherlands)

    Van Eijndhoven, J.T.J.; Li, X.

    2006-01-01

    This thesis focuses on the issue of mapping 3D-TV rendering applications to a multiprocessor platform. The target platform aims to address tomorrow's multi-media consumer market. The prototype chip, called Wasabi, contains a set of TriMedia processors that communicate viaa shared memory, fast messag

  14. Smooth, Interactive Rendering Techniques on Large-Scale, Geospatial Data in Flood Visualizations

    NARCIS (Netherlands)

    Kehl, C.; Tutenel, T.; Eisemann, E.

    2013-01-01

    Visualising large-scale geospatial data is a demanding challenge that finds applications in many fields, including climatology and hydrology. Due to the enormous data size, it is currently not possible to render full datasets interactively without significantly compromising quality (especially not w

  15. Real-time Terrain Rendering using Smooth Hardware Optimized Level of Detail

    DEFF Research Database (Denmark)

    Larsen, Bent Dalgaard; Christensen, Niels Jørgen

    2003-01-01

    - also known as ’popping’, when reducing the geometry by exploiting the low-level hardware programmability in order to maintain interactive framerates. Terrain models are repolygonized in order to minimizing the visible error. Furthermore, the method minimizes CPU usage during rendering and requires...

  16. Compression, Modeling, and Real-Time Rendering of Realistic Materials and Objects

    OpenAIRE

    Menzel, Nicolas

    2012-01-01

    The realism of a scene basically depends on the quality of the geometry, the illumination and the materials that are used. Whereas many sources for the creation of three-dimensional geometry exist and numerous algorithms for the approximation of global illumination were presented, the acquisition and rendering of realistic materials remains a challenging problem. Realistic materials are very important in computer graphics, because...

  17. Advanced Audiovisual Rendering, Gesture-Based Interaction and Distributed Delivery for Immersive and Interactive Media Services

    NARCIS (Netherlands)

    Niamut, O.A.; Kochale, A.; Ruiz Hidalgo, J.; Macq, J-F.; Kienast, G.

    2011-01-01

    The media industry is currently being pulled in the often-opposing directions of increased realism (high resolution, stereoscopic, large screen) and personalisation (selection and control of content, availability on many devices). A capture, production, delivery and rendering system capable of

  18. Psychophysical evaluations of various color rendering from LED-based architectural lighting

    Science.gov (United States)

    Thompson, Maria; O'Reilly, Una-May; Levin, Robert

    2007-09-01

    This paper reports a study on visual evaluation of colors under LED lighting operated by an energy-saving control strategy. Digitally controlled LED systems can produce various qualities of light, adjustable to users' requirements. In this context, a novel control concept inspired this research: strategic control of Red, Yellow, Green & Blue LEDs forming white light can further increase energy efficiency. The resulting (more efficient) light, however, would have decreased "color rendering" (ability of accurately reproduce colors). The notable point is that while reducing color rendering, color temperature and light levels can stay constant and hence the appearance of the modified light could stay the same, and only the colors of illuminated objects would change. But how spaces would be perceived under such light with changing color rendering is a key question. This research investigated the hypothesis that a significant range of color distortions would be unnoticeable under such dynamically controlled illumination, especially outside of users' main field of view. If successful, such control technique could be implemented for unoccupied spaces that would not tolerated dimming, and minimize peak hours energy waste, potentially enabling significant power reductions. Three incremental series of experiments were performed based on subjective assessment of colors under changing color rendering. Tests were carried out for central and peripheral vision, using laboratory booths (phase 1) and full scale architectural mockups (phase 2). Results confirmed the fundamental hypothesis, showing that the majority of subjects did not detect the color changes in their periphery while the same color changes were noticeable with direct observation.

  19. Photometric and Colorimeric Comparison of HDR and Spctrally Resolved Rendering Images

    DEFF Research Database (Denmark)

    Amdemeskel, Mekbib Wubishet; Soreze, Thierry Silvio Claude; Thorseth, Anders

    2016-01-01

    used a scene similar to the cornel box (CUPCG, 1998) but with a spectrally controllable LED light source, neutral grey walls and a colour checker board for colorimetric assessments. The luminance value and colour information of the HDR camera and rendering images are used for the comparison...

  20. An improved scheduling algorithm for 3D cluster rendering with platform LSF

    Science.gov (United States)

    Xu, Wenli; Zhu, Yi; Zhang, Liping

    2013-10-01

    High-quality photorealistic rendering of 3D modeling needs powerful computing systems. On this demand highly efficient management of cluster resources develops fast to exert advantages. This paper is absorbed in the aim of how to improve the efficiency of 3D rendering tasks in cluster. It focuses research on a dynamic feedback load balance (DFLB) algorithm, the work principle of load sharing facility (LSF) and optimization of external scheduler plug-in. The algorithm can be applied into match and allocation phase of a scheduling cycle. Candidate hosts is prepared in sequence in match phase. And the scheduler makes allocation decisions for each job in allocation phase. With the dynamic mechanism, new weight is assigned to each candidate host for rearrangement. The most suitable one will be dispatched for rendering. A new plugin module of this algorithm has been designed and integrated into the internal scheduler. Simulation experiments demonstrate the ability of improved plugin module is superior to the default one for rendering tasks. It can help avoid load imbalance among servers, increase system throughput and improve system utilization.

  1. Oral cancer knowledge among Turkish dental patients

    Directory of Open Access Journals (Sweden)

    Melda Misirlioglu

    2013-01-01

    Full Text Available Aims: To determine the level of oral cancer awareness and knowledge among patients referred to the Department of Oral and Maxillofacial Radiology in Central Anatolia. Settings and Design: The study was conducted with 1,125 patients who applied to the school of dentistry for routine dental examinations. The authors collect information with a 20-item written questionnaire from the participants about oral cancer risk factors, epidemiology, etiology, and signs and symptoms. Statistical Analysis: Descriptive statistics of demographic variables and other data were reported as means and percentages. Statistical analysis was performed by means of SPSS +11.0 statistical package. Results: Overall, only 48.9% of all patients showed awareness of oral cancer, with awareness especially poor among lower socioeconomic groups. Awareness of oral cancer risk factors and signs and symptoms did not vary significantly between men and women (P > 0.5; however, older participants (aged 40-64 years were more familiar with oral cancer signs than younger participants. More than half of all participants (56.8% were unaware of the common clinical presentations of oral cancer. Conclusions: The results of this survey showed knowledge regarding oral cancer to be quite low. Thus, educational programs are needed to increase public awareness about oral cancer, and dentists should request patients undergo examinations for oral cancer to ensure early detection.

  2. Oral dirofilariasis

    Directory of Open Access Journals (Sweden)

    Mahija Janardhanan

    2014-01-01

    Full Text Available Filariasis affecting animals can rarely cause infections in human beings through the accidental bite of potential vectors. The resulting infection in man, known as zoonotic filariasis occur worldwide. Human dirofilariasis, the most common zoonotic filariasis, is caused by the filarial worm belonging to the genus Dirofilaria. Dirofilarial worms, which are recognized as pathogenic in man can cause nodular lesions in the lung, subcutaneous tissue, peritoneal cavity or eyes. Oral dirofilariasis is extremely rare and only a few cases have been documented. We report an interesting case of dirofilariasis due to Dirofilaria repens involving buccal mucosa in a patient who presented with a facial swelling. The clinical features, diagnostic issues and treatment aspects are discussed. This paper stresses the importance of considering dirofilariasis as differential diagnosis for subcutaneous swelling of the face, especially in areas where it is endemic.

  3. Validation of Thermal Lethality against Salmonella enterica in Poultry Offal during Rendering.

    Science.gov (United States)

    Jones-Ibarra, Amie-Marie; Acuff, Gary R; Alvarado, Christine Z; Taylor, T Matthew

    2017-09-01

    Recent outbreaks of human disease following contact with companion animal foods cross-contaminated with enteric pathogens, such as Salmonella enterica, have resulted in increased concern regarding the microbiological safety of animal foods. Additionally, the U.S. Food and Drug Administration Food Safety Modernization Act and its implementing rules have stipulated the implementation of current good manufacturing practices and food safety preventive controls for livestock and companion animal foods. Animal foods and feeds are sometimes formulated to include thermally rendered animal by-product meals. The objective of this research was to determine the thermal inactivation of S. enterica in poultry offal during rendering at differing temperatures. Raw poultry offal was obtained from a commercial renderer and inoculated with a mixture of Salmonella serovars Senftenberg, Enteritidis, and Gallinarum (an avian pathogen) prior to being subjected to heating at 150, 155, or 160°F (65.5, 68.3, or 71.1°C) for up to 15 min. Following heat application, surviving Salmonella bacteria were enumerated. Mean D-values for the Salmonella cocktail at 150, 155, and 160°F were 0.254 ± 0.045, 0.172 ± 0.012, and 0.086 ± 0.004 min, respectively, indicative of increasing susceptibility to increased application of heat during processing. The mean thermal process constant (z-value) was 21.948 ± 3.87°F. Results indicate that a 7.0-log-cycle inactivation of Salmonella may be obtained from the cumulative lethality encountered during the heating come-up period and subsequent rendering of raw poultry offal at temperatures not less than 150°F. Current poultry rendering procedures are anticipated to be effective for achieving necessary pathogen control when completed under sanitary conditions.

  4. Using wesBench to Study the Rendering Performance of Graphics Processing Units

    Energy Technology Data Exchange (ETDEWEB)

    Bethel, Edward W

    2010-01-08

    Graphics operations consist of two broad operations. The first, which we refer to here as vertex operations, consists of transformation, lighting, primitive assembly, and so forth. The second, which we refer to as pixel or fragment operations, consist of rasterization, texturing, scissoring, blending, and fill. Overall GPU rendering performance is a function of throughput of both these interdependent stages: if one stage is slower than the other, the faster stage will be forced to run more slowly and overall rendering performance will be adversely affected. This relationship is commutative: if the later stage has a greater workload than the earlier stage, the earlier stage will be forced to 'slow down.' For example, a large triangle that covers many screen pixels will incur a very small amount of work in the vertex stage while at the same time incurring a relatively large amount of work in the fragment stage. Rendering performance of a scene consisting of many large-area triangles will be limited by throughput of the fragment stage, which will have relatively more work than the vertex stage. There are two main objectives for this document. First, we introduce a new graphics benchmark, wesBench, which is useful for measuring performance of both stages of the rendering pipeline under varying conditions. Second, we present its methodology for measuring performance and show results of several performance measurement studies aimed at producing better understanding of GPU rendering performance characteristics and limits under varying configurations. First, in Section 2, we explore the 'crossover' point between geometry and rasterization. Second, in Section 3, we explore additional performance characteristics, some of which are ill- or un-documented. Lastly, several appendices provide additional material concerning problems with the gfxbench benchmark, and details about the new wesBench graphics benchmark.

  5. Congenital inner ear malformation: three dimensional volume rendering image using MR CISS sequence

    Energy Technology Data Exchange (ETDEWEB)

    Song, Jong Woon; Lee, In Sook; Kim, Hak Jin; Goh, Eui Kyung; Kim, Lee Suk [College of Medicine, Pusan National Univ., Pusan (Korea, Republic of)

    2003-10-01

    To evaluate three-dimensional volume-rendering of congenital inner-ear malformations using the MR CISS(Constructive Interference in Steady State) sequence. MR CISS images of 30 inner ears of 15 patients (M:F=10.5; mean age, 6.5years) in whom inner-ear malformation was suspected were obtained using a superconducting Magnetom Vision System (Simens, Erlangen, Germany), with TR/TE/FA parameters of 12.25 ms/5.9 ms/70.deg.. The images obtained were processed by means of the volume rendering technique at an advanced workstation (Voxtol 3.0.0; GE Systems, advanced workstation, volume analysis). The cochlea and three semicircular canals were morphologically evaluated. Volume-rendered images of 25 inner ears of 13 patients demonstrated cochlear anomalies in the form of incomplete partition (n=18), hypoplasia (n=2), and severe hypoplasia (n=5). For the superior semicircular canal, findings were normal in 15 ears, though common crus aplasia (n=6), hypoplasia (n=4), aplasia (n=3), and a short and broad shape (n=2) were also observed. The posterior semicircular canal of 13 ears was normal, but common crus aplasia (n=6), a short and broad shape (n=5), aplasia (n=4), hypoplasia (n=3) were also identified. Twelve lateral semicircular canals, were normal, but other images depicted a short and broad shape (n=7), a dilated crus (n=5), a broad shape (n=4), and aplasia (n=2). In 14 patients the anomalies were bilateral, and in seven, the same anomalies affected both ears. Three-dimensional volume rendering images of the inner ear depicted various morphological abnormalities of the cochlea and semicircular canals. At that locations, anomalies were more complicated and varied than in the cochlea. Three-dimensional volume rendering imaging using the MR CISS technique provides anatomical information regarding the membranous labyrinth, and we consider this useful in the evaluation of congenital inner ear malformations.

  6. Oral sex, oral health and orogenital infections

    Directory of Open Access Journals (Sweden)

    Saini Rajiv

    2010-01-01

    Full Text Available Oral sex is commonly practiced by sexually active male-female and same-gender couples of various ages, including adolescents. The various type of oral sex practices are fellatio, cunnilingus and analingus. Oral sex is infrequently examined in research on adolescents; oral sex can transmit oral, respiratory, and genital pathogens. Oral health has a direct impact on the transmission of infection; a cut in your mouth, bleeding gums, lip sores or broken skin increases chances of infection. Although oral sex is considered a low risk activity, it is important to use protection and safer sex precautions. There are various methods of preventing infection during oral sex such as physical barriers, health and medical issues, ethical issues and oral hygiene and dental issues. The lesions or unhealthy periodontal status of oral cavity accelerates the phenomenon of transmission of infections into the circulation. Thus consequences of unhealthy or painful oral cavity are significant and oral health should be given paramount importance for the practice of oral sex.

  7. Oral amyloidosis

    Directory of Open Access Journals (Sweden)

    Isabella Lima Arrais Ribeiro

    Full Text Available A amiloidose é uma doença complexa rara de difícil diagnóstico que ocorre devido à deposição de substância amilóide no meio extracelular. Ao ser diagnosticado na cavidade bucal, deve-se monitorar o paciente a fim de avaliar possíveis complicações sistêmicas da doença. Diante disso, o objetivo do presente estudo é relatar um caso de amiloidose oral em uma paciente do gênero feminino de 72 anos de idade. Baseado nos sinais clínicos observados, a hipótese diagnóstica foi de fibroma traumático. Após realização de biópsia e exame histopatológico, o diagnóstico foi de amiloidose oral, o que foi confirmado com a coloração do espécime com o reagente vermelho congo. Depósitos de amilóide foram encontrados no tecido conjuntivo, na avaliação através da luz polarizada, que apresentou birrefringência. Tal achado foi preocupante, já que a amiloidose geralmente acomete diversos tecidos levando a comprometimentos sistêmicos. Por essa razão a paciente foi encaminhada a procurar atendimento médico. No entanto, houve abandono do tratamento e a mesma veio a óbito 6 meses após o diagnóstico da doença. Lesões orais aparentemente simples podem revelar doenças raras e de difícil tratamento. O diagnóstico preciso e acompanhamentos médicos são fundamentais na sobrevida do paciente.

  8. 75 FR 2529 - Notice of Public Hearing

    Science.gov (United States)

    2010-01-15

    ... presentations. Oral testimony should not exceed ten minutes. Testimony will become part of the public record. To... are invited to present written and/or oral testimony. The hearing will be held at the Washington Court... obtain input and feedback on earlier drafts of the assessment framework. This public hearing...

  9. Oral Cancer Exam

    Medline Plus

    Full Text Available ... Programs Careers in Dental Research See All Continuing Education Practical Oral Care for People With Developmental Disabilities – ... detection and treatment of oral cancers. Note: For materials specific to African American men, please see: Oral ...

  10. Oral Lichen Planus

    Science.gov (United States)

    Oral lichen planus Overview By Mayo Clinic Staff Oral lichen planus (LIE-kun PLAY-nus) is an ongoing (chronic) ... that affects mucous membranes inside your mouth. Oral lichen planus may appear as white, lacy patches; red, ...

  11. Oral Health Glossary

    Science.gov (United States)

    ... About | Contact InfoBites Quick Reference Learn more Children's Oral Health Mouth Breathing Can Cause Major Health Problems Over ... news feeds delivered directly to your desktop! more... Oral Health Glossary Article Chapters Oral Health Glossary print full ...

  12. Oral prosthetics from a Nordic perspective.

    Science.gov (United States)

    Jokstad, Asbjørn

    2002-01-01

    The purpose of this study was to describe oral prosthetics in a context intended for other, primarily Nordic, health professionals and health authorities. An article describing oral prosthetics for the general public was formulated on the basis of recent data and publications in prosthodontics from Scandinavian authors. A draft was presented to the educational committee of the Scandinavian Society for Prosthetic Dentistry for verification and consensus. Following modifications and amendments by representatives from the 11 dental schools in the Nordic countries, the educational committee has approved the present article. The report consists of four sections describing oral prosthetics, prosthetic therapy, undergraduate teaching in oral prosthetics, and advanced oral prosthetics, from a Nordic perspective. The report appraises the various factors in context with demographic, cultural, and professional circumstances and suggests strategies for improvement of present conditions. The relationship between the undergraduate curriculum in oral prosthetics and the public need for advanced oral prosthetics must continuously be monitored so that patients can obtain optimal care from the profession.

  13. Public Education, Public Good.

    Science.gov (United States)

    Tomlinson, John

    1986-01-01

    Criticizes policies which would damage or destroy a public education system. Examines the relationship between government-provided education and democracy. Concludes that privatization of public education would emphasize self-interest and selfishness, further jeopardizing the altruism and civic mindedness necessary for the public good. (JDH)

  14. Apparatus for rendering at least a portion of a device inoperable and related methods

    Science.gov (United States)

    Daniels, Michael A.; Steffler, Eric D.; Hartenstein, Steven D.; Wallace, Ronald S.

    2016-11-08

    Apparatus for rendering at least a portion of a device inoperable may include a containment structure having a first compartment that is configured to receive a device therein and a movable member configured to receive a cartridge having reactant material therein. The movable member is configured to be inserted into the first compartment of the containment structure and to ignite the reactant material within the cartridge. Methods of rendering at least a portion of a device inoperable may include disposing the device into the first compartment of the containment structure, inserting the movable member into the first compartment of the containment structure, igniting the reactant material in the cartridge, and expelling molten metal onto the device.

  15. Color Temperature Tunable White-Light LED Cluster with Extrahigh Color Rendering Index

    Directory of Open Access Journals (Sweden)

    Minhao Zhang

    2014-01-01

    Full Text Available The correlated color temperature (CCT tunable white-light LED cluster with extrahigh color rendering property has been found by simulation and fabricated, which consists of three WW LEDs (CCT = 3183 K, one red LED (634.1 nm, one green LED (513.9 nm, and one blue LED (456.2 nm. The experimental results show that this cluster can realize the CCT tunable white-lights with a color rendering index (CRI above 93, special CRI R9 for strong red above 90, average value of the special CRIs of R9 to R12 for the four saturated colors (red, yellow, green, and blue above 83, and luminous efficacies above 70 lm/W at CCTs of 2719 K to 6497 K.

  16. An innovative calibration based integral photography rendering algorithm for medical application and its evaluation.

    Science.gov (United States)

    Chen, Guowen; Zhang, Xinran; Fan, Zhencheng; Liao, Hongen

    2015-01-01

    Autostereoscopic has long been proposed to fulfill medical display in image-guided surgery and clinical education to provide more intuitive position information of clinical interest zone thus improving surgery safety and accuracy. As one category of flexible autostereoscopic 3D display, computer generated integral photography (CGIP) has been studied in medical application by many researches for its convenience and cost-efficiency. However, IP still suffers from inaccurate light field reconstruction, which limits its practicality in surgery. In this paper, we propose and apply a flexible fish-eye model based micro lens array (MLA) distortion calibration method and pre-distorted retracing rendering algorithm to render elemental image array (EIA) of CGIP. Furthermore, we also evaluate light field of the proposed algorithm in depth cue, and signal noise ratio of IP images by phantom experiment.

  17. 3D virtual rendering in thoracoscopic treatment of congenital malformation of the lung

    Directory of Open Access Journals (Sweden)

    Destro F.

    2013-10-01

    Full Text Available Introduction: Congenital malformations of the lung (CML are rare but potentially dangerous congenital malformations. Their identification is important in order to define the most appropriate management. Materials and methods: We retrospectively reviewed data from 37 patients affected by CML treated in our Pediatric Surgery Unit in the last four years with minimally invasive surgery (MIS. Results: Prenatal diagnosis was possible in 26/37 patients. Surgery was performed in the first month of life in 3 symptomatic patients and between 6 and 12 months in the others. All patients underwent radiological evaluation prior to thoracoscopic surgery. Images collected were reconstructed using the VR render software. Discussion and conclusions: Volume rendering gives high anatomical resolution and it can be useful to guide the surgical procedure. Thoracoscopy should be the technique of choice because it is safe, effective and feasible. Furthermore it has the benefit of a minimal access technique and it can be easily performed in children.

  18. Visions of architecture. Perspective and photographic manipulation from photomontage to rendering.

    Directory of Open Access Journals (Sweden)

    Marta Magagnini

    2013-10-01

    Full Text Available The submitted article investigates the existence of a philological and semantic continuity between contemporary perspectives made with photorealistic three-dimensional CG techniques and the analogical ones that use photography for the design process. The research, which moves from historical milestones, tracks the purposes of photomontage in architecture, form the first use in art and the in architecture, to the contemporary CG rendering. The goal is not to search for ways to construct architectural objects, but rather to use potential capability of digital design to realize the assertiveness of the image. Another issue is about the role of perspective (and the mastery of descriptive geometry nowadays. In support of the theoretical speculations, some unedited comments by the same authors to the photomontages of Superstudio and to the renderings of Giacomo Costa.

  19. A Practical Framework for Sharing and Rendering Real-World Bidirectional Scattering Distribution Functions

    Energy Technology Data Exchange (ETDEWEB)

    Ward, Greg [Anywhere Software, Albany, CA (United States); Kurt, Murat [International Computer Institute, Ege University (Turkey); Bonneel, Nicolas [Harvard Univ., Cambridge, MA (United States)

    2012-09-30

    The utilization of real-world materials has been hindered by a lack of standards for sharing and interpreting measured data. This paper presents an XML representation and an Open Source C library to support bidirectional scattering distribution functions (BSDFs) in data-driven lighting simulation and rendering applications.The library provides for the efficient representation, query, and Monte Carlo sampling of arbitrary BSDFs in amodel-free framework. Currently, we support two BSDF data representations: one using a fixed subdivision of thehemisphere, and one with adaptive density. The fixed type has advantages for certain matrix operations, while theadaptive type can more accurately represent highly peaked data. We discuss advanced methods for data-drivenBSDF rendering for both types, including the proxy of detailed geometry to enhance appearance and accuracy.We also present an advanced interpolation method to reduce measured data into these standard representations.We end with our plan for future extensions and sharing of BSDF data.

  20. Introduction to the special section on 3D representation, compression, and rendering.

    Science.gov (United States)

    Vetro, Anthony; Frossard, Pascal; Lee, Sanghoon; Mueller, Karsten; Ohm, Jens-Rainer; Sullivan, Gary

    2013-09-01

    A new set of three-dimensional (3D) data formats and associated compression technologies are emerging with the aim to achieve more flexible representation and higher compression of 3D and multiview video content. These new tools will facilitate the generation of multiview output (e.g., as needed for multiview auto-stereoscopic displays), provide richer immersive multimedia experiences, and allow new interactive applications. This special section includes a timely set of papers covering the most recent technical developments in this area with papers covering topics in the different aspects of 3D systems, from representation and compression algorithms to rendering techniques and quality assessment. This special section includes a good balance on topics that are of interest to academic, industrial, and standardization communities. We believe that this collection of papers represent the most recent advances in representation, compression, rendering, and quality assessment of 3D scenes.

  1. Color temperature tunable white-light LED cluster with extrahigh color rendering index.

    Science.gov (United States)

    Zhang, Minhao; Chen, Yu; He, Guoxing

    2014-01-01

    The correlated color temperature (CCT) tunable white-light LED cluster with extrahigh color rendering property has been found by simulation and fabricated, which consists of three WW LEDs (CCT = 3183 K), one red LED (634.1 nm), one green LED (513.9 nm), and one blue LED (456.2 nm). The experimental results show that this cluster can realize the CCT tunable white-lights with a color rendering index (CRI) above 93, special CRI R9 for strong red above 90, average value of the special CRIs of R9 to R12 for the four saturated colors (red, yellow, green, and blue) above 83, and luminous efficacies above 70 lm/W at CCTs of 2719 K to 6497 K.

  2. 3D chromosome rendering from Hi-C data using virtual reality

    Science.gov (United States)

    Zhu, Yixin; Selvaraj, Siddarth; Weber, Philip; Fang, Jennifer; Schulze, Jürgen P.; Ren, Bing

    2015-01-01

    Most genome browsers display DNA linearly, using single-dimensional depictions that are useful to examine certain epigenetic mechanisms such as DNA methylation. However, these representations are insufficient to visualize intrachromosomal interactions and relationships between distal genome features. Relationships between DNA regions may be difficult to decipher or missed entirely if those regions are distant in one dimension but could be spatially proximal when mapped to three-dimensional space. For example, the visualization of enhancers folding over genes is only fully expressed in three-dimensional space. Thus, to accurately understand DNA behavior during gene expression, a means to model chromosomes is essential. Using coordinates generated from Hi-C interaction frequency data, we have created interactive 3D models of whole chromosome structures and its respective domains. We have also rendered information on genomic features such as genes, CTCF binding sites, and enhancers. The goal of this article is to present the procedure, findings, and conclusions of our models and renderings.

  3. Rendering LGBTQ+ Visible in Nursing: Embodying the Philosophy of Caring Science.

    Science.gov (United States)

    Goldberg, Lisa; Rosenburg, Neal; Watson, Jean

    2017-06-01

    Although health care institutions continue to address the importance of diversity initiatives, the standard(s) for treatment remain historically and institutionally grounded in a sociocultural privileging of heterosexuality. As a result, lesbian, gay, bisexual, transgender, and queer (LGBTQ+) communities in health care remain largely invisible. This marked invisibility serves as a call to action, a renaissance of thinking within redefined boundaries and limitations. We must therefore refocus our habits of attention on the wholeness of persons and the diversity of their storied experiences as embodied through contemporary society. By rethinking current understandings of LGBTQ+ identities through innovative representation(s) of the media, music industry, and pop culture within a caring science philosophy, nurses have a transformative opportunity to render LGBTQ+ visible and in turn render a transformative opportunity for themselves.

  4. Morpes: A Model for Personalized Rendering of Web Content on Mobile Devices

    CERN Document Server

    Kuppusamy, K S; 10.5121/ijfcst.2012.2204

    2012-01-01

    With the tremendous growth in the information communication sector, the mobile phones have become the prime information communication devices. The convergence of traditional telephony with the modern web enabled communication in the mobile devices has made the communication much effective and simpler. As mobile phones are becoming the crucial source of accessing the contents of the World Wide Web which was originally designed for personal computers, has opened up a new challenge of accommodating the web contents in to the smaller mobile devices. This paper proposes an approach towards building a model for rendering the web pages in mobile devices. The proposed model is based on a multi-dimensional web page segment evaluation model. The incorporation of personalization in the proposed model makes the rendering user-centric. The proposed model is validated with a prototype implementation.

  5. Mineralogical characterization of rendering mortars from decorative details of a baroque building in Kozuchow (SW Poland)

    Energy Technology Data Exchange (ETDEWEB)

    Bartz, W., E-mail: wojciech.bartz@ing.uni.wroc.pl [Institute of Geological Sciences, University of Wroclaw, ul. Cybulskiego 30, 50-205 Wroclaw (Poland); Filar, T. [Fil-Art, ul.Technologow 13/8, 65-424 Zielona Gora (Poland)

    2010-01-15

    Optical microscopic observations, scanning electron microscopy and microprobe with energy dispersive X-ray analysis, X-ray diffraction and differential thermal/thermogravimetric analysis allowed detailed characterization of rendering mortars from decorative details (figures of Saints) of a baroque building in Kozuchow (Lubuskie Voivodship, Western Poland). Two separate coats of rendering mortars have been distinguished, differing in composition of their filler. The under coat mortar has filler composed of coarse-grained siliceous sand, whereas the finishing one has much finer grained filler, dominated by a mixture of charcoal and Fe-smelting slag, with minor amounts of quartz grains. Both mortars have air-hardening binder composed of gypsum and micritic calcite, exhibiting microcrystalline structure.

  6. Apparatus for rendering at least a portion of a device inoperable and related methods

    Energy Technology Data Exchange (ETDEWEB)

    Daniels, Michael A.; Steffler, Eric D.; Hartenstein, Steven D.; Wallace, Ronald S.

    2016-11-08

    Apparatus for rendering at least a portion of a device inoperable may include a containment structure having a first compartment that is configured to receive a device therein and a movable member configured to receive a cartridge having reactant material therein. The movable member is configured to be inserted into the first compartment of the containment structure and to ignite the reactant material within the cartridge. Methods of rendering at least a portion of a device inoperable may include disposing the device into the first compartment of the containment structure, inserting the movable member into the first compartment of the containment structure, igniting the reactant material in the cartridge, and expelling molten metal onto the device.

  7. A Semi-automated Approach to Improve the Efficiency of Medical Imaging Segmentation for Haptic Rendering.

    Science.gov (United States)

    Banerjee, Pat; Hu, Mengqi; Kannan, Rahul; Krishnaswamy, Srinivasan

    2017-08-01

    The Sensimmer platform represents our ongoing research on simultaneous haptics and graphics rendering of 3D models. For simulation of medical and surgical procedures using Sensimmer, 3D models must be obtained from medical imaging data, such as magnetic resonance imaging (MRI) or computed tomography (CT). Image segmentation techniques are used to determine the anatomies of interest from the images. 3D models are obtained from segmentation and their triangle reduction is required for graphics and haptics rendering. This paper focuses on creating 3D models by automating the segmentation of CT images based on the pixel contrast for integrating the interface between Sensimmer and medical imaging devices, using the volumetric approach, Hough transform method, and manual centering method. Hence, automating the process has reduced the segmentation time by 56.35% while maintaining the same accuracy of the output at ±2 voxels.

  8. Considerations about the use of lime-cement mortars for render conservation purposes

    OpenAIRE

    Torgal, Fernando Pacheco; Faria, Joana; Shasavandi, Arman; Jalali, Said

    2011-01-01

    Some investigations about conservation renders points out that Portland cement based mortars should be avoided and should be replaced by lime-pozzolan mortars. However, this type of mortar is still under investigation and the majority of Portuguese construction enterprises operating in the field of building conservation do not possess enough know-how about them. Besides the absolute rejection of the use of Portland cement based mortars even with just a minimum amount appears to be a dogmat...

  9. Joint Projection Filling method for occlusion handling in Depth-Image-Based Rendering

    OpenAIRE

    Jantet, Vincent; Guillemot, Christine; Morin, Luce

    2011-01-01

    International audience; This paper addresses the disocclusion problem which may occur when using Depth-Image-Based Rendering (DIBR) techniques in 3DTV and Free-Viewpoint TV applications. A new DIBR technique is proposed, which combines three methods: a Joint Projection Filling (JPF) method to handle disocclusions in synthesized depth maps; a backward projection to synthesize virtual views; and a full-Z depth-aided inpainting to fill in disoccluded areas in textures. The JPF method performs th...

  10. Dynamic real-time 4D cardiac MDCT image display using GPU-accelerated volume rendering.

    Science.gov (United States)

    Zhang, Qi; Eagleson, Roy; Peters, Terry M

    2009-09-01

    Intraoperative cardiac monitoring, accurate preoperative diagnosis, and surgical planning are important components of minimally-invasive cardiac therapy. Retrospective, electrocardiographically (ECG) gated, multidetector computed tomographical (MDCT), four-dimensional (3D + time), real-time, cardiac image visualization is an important tool for the surgeon in such procedure, particularly if the dynamic volumetric image can be registered to, and fused with the actual patient anatomy. The addition of stereoscopic imaging provides a more intuitive environment by adding binocular vision and depth cues to structures within the beating heart. In this paper, we describe the design and implementation of a comprehensive stereoscopic 4D cardiac image visualization and manipulation platform, based on the opacity density radiation model, which exploits the power of modern graphics processing units (GPUs) in the rendering pipeline. In addition, we present a new algorithm to synchronize the phases of the dynamic heart to clinical ECG signals, and to calculate and compensate for latencies in the visualization pipeline. A dynamic multiresolution display is implemented to enable the interactive selection and emphasis of volume of interest (VOI) within the entire contextual cardiac volume and to enhance performance, and a novel color and opacity adjustment algorithm is designed to increase the uniformity of the rendered multiresolution image of heart. Our system provides a visualization environment superior to noninteractive software-based implementations, but with a rendering speed that is comparable to traditional, but inferior quality, volume rendering approaches based on texture mapping. This retrospective ECG-gated dynamic cardiac display system can provide real-time feedback regarding the suspected pathology, function, and structural defects, as well as anatomical information such as chamber volume and morphology.

  11. Hardware Implementation of an Automatic Rendering Tone Mapping Algorithm for a Wide Dynamic Range Display

    OpenAIRE

    2013-01-01

    Tone mapping algorithms are used to adapt captured wide dynamic range (WDR) scenes to the limited dynamic range of available display devices. Although there are several tone mapping algorithms available, most of them require manual tuning of their rendering parameters. In addition, the high complexities of some of these algorithms make it difficult to implement efficient real-time hardware systems. In this work, a real-time hardware implementation of an exponent-based tone mapping algorithm i...

  12. Detection of Prion Proteins and TSE Infectivity in the Rendering and Biodiesel Manufacture Processes

    Energy Technology Data Exchange (ETDEWEB)

    Brown, R.; Keller, B.; Oleschuk, R. [Queen' s University, Kingston, Ontario (Canada)

    2007-03-15

    This paper addresses emerging issues related to monitoring prion proteins and TSE infectivity in the products and waste streams of rendering and biodiesel manufacture processes. Monitoring is critical to addressing the knowledge gaps identified in 'Biodiesel from Specified Risk Material Tallow: An Appraisal of TSE Risks and their Reduction' (IEA's AMF Annex XXX, 2006) that prevent comprehensive risk assessment of TSE infectivity in products and waste. The most important challenge for monitoring TSE risk is the wide variety of sample types, which are generated at different points in the rendering/biodiesel production continuum. Conventional transmissible spongiform encephalopathy (TSE) assays were developed for specified risk material (SRM) and other biological tissues. These, however, are insufficient to address the diverse sample matrices produced in rendering and biodiesel manufacture. This paper examines the sample types expected in rendering and biodiesel manufacture and the implications of applying TSE assay methods to them. The authors then discuss a sample preparation filtration, which has not yet been applied to these sample types, but which has the potential to provide or significantly improve TSE monitoring. The main improvement will come from transfer of the prion proteins from the sample matrix to a matrix compatible with conventional and emerging bioassays. A second improvement will come from preconcentrating the prion proteins, which means transferring proteins from a larger sample volume into a smaller volume for analysis to provide greater detection sensitivity. This filtration method may also be useful for monitoring other samples, including wash waters and other waste streams, which may contain SRM, including those from abattoirs and on-farm operations. Finally, there is a discussion of emerging mass spectrometric methods, which Prusiner and others have shown to be suitable for detection and characterisation of prion proteins (Stahl

  13. Durability to marine environment of innovative products for consolidation and chromatic reintegration of historical renders

    OpenAIRE

    Matos, Margarida; Borsoi, Giovanni; Veiga,Rosário; Faria, Paulina; Santos-Silva, António

    2014-01-01

    9th International Masonry Conference 2014, 7-9 July, Universidade do Minho, Guimarães A common degradation phenomenon in historical renders is the cohesion loss of the binder:aggregate system, which is often linked to the presence of soluble salts. Cohesion is recovered through the application of consolidant products, being inorganics preferred due to their compatibility and durability. The aesthetic function can be restored by chromatic reintegration. The aim of this paper is the as...

  14. LOD 1 VS. LOD 2 - Preliminary Investigations Into Differences in Mobile Rendering Performance

    Science.gov (United States)

    Ellul, C.; Altenbuchner, J.

    2013-09-01

    The increasing availability, size and detail of 3D City Model datasets has led to a challenge when rendering such data on mobile devices. Understanding the limitations to the usability of such models on these devices is particularly important given the broadening range of applications - such as pollution or noise modelling, tourism, planning, solar potential - for which these datasets and resulting visualisations can be utilized. Much 3D City Model data is created by extrusion of 2D topographic datasets, resulting in what is known as Level of Detail (LoD) 1 buildings - with flat roofs. However, in the UK the National Mapping Agency (the Ordnance Survey, OS) is now releasing test datasets to Level of Detail (LoD) 2 - i.e. including roof structures. These datasets are designed to integrate with the LoD 1 datasets provided by the OS, and provide additional detail in particular on larger buildings and in town centres. The availability of such integrated datasets at two different Levels of Detail permits investigation into the impact of the additional roof structures (and hence the display of a more realistic 3D City Model) on rendering performance on a mobile device. This paper describes preliminary work carried out to investigate this issue, for the test area of the city of Sheffield (in the UK Midlands). The data is stored in a 3D spatial database as triangles and then extracted and served as a web-based data stream which is queried by an App developed on the mobile device (using the Android environment, Java and OpenGL for graphics). Initial tests have been carried out on two dataset sizes, for the city centre and a larger area, rendering the data onto a tablet to compare results. Results of 52 seconds for rendering LoD 1 data, and 72 seconds for LoD 1 mixed with LoD 2 data, show that the impact of LoD 2 is significant.

  15. FluoRender: joint freehand segmentation and visualization for many-channel fluorescence data analysis.

    Science.gov (United States)

    Wan, Yong; Otsuna, Hideo; Holman, Holly A; Bagley, Brig; Ito, Masayoshi; Lewis, A Kelsey; Colasanto, Mary; Kardon, Gabrielle; Ito, Kei; Hansen, Charles

    2017-05-26

    Image segmentation and registration techniques have enabled biologists to place large amounts of volume data from fluorescence microscopy, morphed three-dimensionally, onto a common spatial frame. Existing tools built on volume visualization pipelines for single channel or red-green-blue (RGB) channels have become inadequate for the new challenges of fluorescence microscopy. For a three-dimensional atlas of the insect nervous system, hundreds of volume channels are rendered simultaneously, whereas fluorescence intensity values from each channel need to be preserved for versatile adjustment and analysis. Although several existing tools have incorporated support of multichannel data using various strategies, the lack of a flexible design has made true many-channel visualization and analysis unavailable. The most common practice for many-channel volume data presentation is still converting and rendering pseudosurfaces, which are inaccurate for both qualitative and quantitative evaluations. Here, we present an alternative design strategy that accommodates the visualization and analysis of about 100 volume channels, each of which can be interactively adjusted, selected, and segmented using freehand tools. Our multichannel visualization includes a multilevel streaming pipeline plus a triple-buffer compositing technique. Our method also preserves original fluorescence intensity values on graphics hardware, a crucial feature that allows graphics-processing-unit (GPU)-based processing for interactive data analysis, such as freehand segmentation. We have implemented the design strategies as a thorough restructuring of our original tool, FluoRender. The redesign of FluoRender not only maintains the existing multichannel capabilities for a greatly extended number of volume channels, but also enables new analysis functions for many-channel data from emerging biomedical-imaging techniques.

  16. ROOT OO model to render multi-level 3-D geometrical objects via an OpenGL

    Science.gov (United States)

    Brun, Rene; Fine, Valeri; Rademakers, Fons

    2001-08-01

    This paper presents a set of C++ low-level classes to render 3D objects within ROOT-based frameworks. This allows developing a set of viewers with different properties the user can choose from to render one and the same 3D objects.

  17. Greenhouse gas life cycle assessment of products arising from the rendering of mammalian animal byproducts in the UK.

    Science.gov (United States)

    Ramirez, Angel D; Humphries, Andrea C; Woodgate, Stephen L; Wilkinson, Robert G

    2012-01-03

    Animal byproducts (ABP) are unavoidable byproduct of meat production that are categorized under EU legislation into category 1, 2, and 3 materials, which are normally treated by rendering. Rendering is a thermal process that produces rendered fat and protein. Heat is provided from the combustion of natural gas and self-produced rendered fat. The main objectives of the study were (i) to assess energy intensity in the UK rendering industry, and (ii) to quantify the greenhouse gas emissions associated with the production of mammalian rendered products using life cycle assessment. Thermal energy requirements were 2646 and 1357 kJ/kg, whereas electricity requirements were 260 and 375 kJ/kg for category 1 and 3 ABP respectively. Fossil CO(2) emissions were -0.77 and 0.15 kg CO(2)e/kg category 1 and 3 mammalian rendered fat respectively and 0.15 kg CO(2)e/kg processed animal protein. These were low relative to vegetable products such as palm oil and soya bean meal because (i) ABP were considered wastes that do not incur the environmental burden of their production, and (ii) the rendering process produces biofuels that can be used to generate energy that can be used to offset the use of fossil fuels in other systems.

  18. Hesse Rendering for Computer Aided Visualization and Analysis (CAVA) of Anomalies in Chest CT and Breast MRI

    NARCIS (Netherlands)

    Wiemker, R.; Dharaiya, E.D.; Buelow, T.

    2011-01-01

    As a complement to maximum intensity projection (MIP) and direct volume rendering of the Hounsfield densities, a Hesse rendering can show the local curvature of structures rather than the densities. Color coding of the local curvatures, or simply of the eigenvalues of the local second derivatives,

  19. Efficient rendering of digitally reconstructed radiographs on heterogeneous computing architectures using central slice theorem.

    Science.gov (United States)

    Abdellah, Marwan; Abdallah, Mohamed; Alzanati, Mohamed; Eldeib, Ayman

    2016-08-01

    Digitally reconstructed radiographs (DRRs) play a significant role in modern clinical radiation therapy. They are used to verify patient alignments during image guided therapies with 2D-3D image registration. The generation of DRRs can be implemented intuitively in O(N3) relying on direct volume rendering (DVR) methods, such as ray marching. This complexity imposes certain limitations on the rendering performance if high quality DRR images are needed. Those DRRs can be alternatively generated in the k-space using the central slice theorem in O(N2logN). Several rendering pipelines have been designed to create the DRRs in the k-space, but they were either limited to specific vendor or entail particular software requirements. We present a high performance implementation of a k-space-based DRR generation pipeline that is executable on various heterogeneous computing architectures using OpenCL. Our implementation generates a DRR for a 5123 CT volume in 6, 2.7 and 0.68 milli-seconds on a commodity CPU, mid-range and high-end GPUs respectively.

  20. Viewpoint Selection Using Hybrid Simplex Search and Particle Swarm Optimization for Volume Rendering

    Directory of Open Access Journals (Sweden)

    Zhang You-sai,,,

    2012-09-01

    Full Text Available In this paper we proposed a novel method of viewpoint selection using the hybrid Nelder-Mead (NM simplex search and particle swarm optimization (PSO to improve the efficiency and the intelligent level of volume rendering. This method constructed the viewpoint quality evaluation function in the form of entropy by utilizing the luminance and structure features of the two-dimensional projective image of volume data. During the process of volume rendering, the hybrid NM-PSO algorithm intended to locate the globally optimal viewpoint or a set of the optimized viewpoints automatically and intelligently. Experimental results have shown that this method avoids redundant interactions and evidently improves the efficiency of volume rendering. The optimized viewpoints can focus on the important structural features or the region of interest in volume data and exhibit definite correlation with the perception character of human visual system. Compared with the methods based on PSO or NM simplex search, our method has the better performance of convergence rate, convergence accuracy and robustness.

  1. Simulation and training of lumbar punctures using haptic volume rendering and a 6DOF haptic device

    Science.gov (United States)

    Färber, Matthias; Heller, Julika; Handels, Heinz

    2007-03-01

    The lumbar puncture is performed by inserting a needle into the spinal chord of the patient to inject medicaments or to extract liquor. The training of this procedure is usually done on the patient guided by experienced supervisors. A virtual reality lumbar puncture simulator has been developed in order to minimize the training costs and the patient's risk. We use a haptic device with six degrees of freedom (6DOF) to feedback forces that resist needle insertion and rotation. An improved haptic volume rendering approach is used to calculate the forces. This approach makes use of label data of relevant structures like skin, bone, muscles or fat and original CT data that contributes information about image structures that can not be segmented. A real-time 3D visualization with optional stereo view shows the punctured region. 2D visualizations of orthogonal slices enable a detailed impression of the anatomical context. The input data consisting of CT and label data and surface models of relevant structures is defined in an XML file together with haptic rendering and visualization parameters. In a first evaluation the visible human male data has been used to generate a virtual training body. Several users with different medical experience tested the lumbar puncture trainer. The simulator gives a good haptic and visual impression of the needle insertion and the haptic volume rendering technique enables the feeling of unsegmented structures. Especially, the restriction of transversal needle movement together with rotation constraints enabled by the 6DOF device facilitate a realistic puncture simulation.

  2. Valorization of rendering industry wastes and co-products for industrial chemicals, materials and energy: review.

    Science.gov (United States)

    Mekonnen, Tizazu; Mussone, Paolo; Bressler, David

    2016-01-01

    Over the past decades, strong global demand for industrial chemicals, raw materials and energy has been driven by rapid industrialization and population growth across the world. In this context, long-term environmental sustainability demands the development of sustainable strategies of resource utilization. The agricultural sector is a major source of underutilized or low-value streams that accompany the production of food and other biomass commodities. Animal agriculture in particular constitutes a substantial portion of the overall agricultural sector, with wastes being generated along the supply chain of slaughtering, handling, catering and rendering. The recent emergence of bovine spongiform encephalopathy (BSE) resulted in the elimination of most of the traditional uses of rendered animal meals such as blood meal, meat and bone meal (MBM) as animal feed with significant economic losses for the entire sector. The focus of this review is on the valorization progress achieved on converting protein feedstock into bio-based plastics, flocculants, surfactants and adhesives. The utilization of other rendering streams such as fat and ash rich biomass for the production of renewable fuels, solvents, drop-in chemicals, minerals and fertilizers is also critically reviewed.

  3. One-Dimensional Haptic Rendering Using Audio Speaker with Displacement Determined by Inductance

    Directory of Open Access Journals (Sweden)

    Avin Khera

    2016-03-01

    Full Text Available We report overall design considerations and preliminary results for a new haptic rendering device based on an audio loudspeaker. Our application models tissue properties during microsurgery. For example, the device could respond to the tip of a tool by simulating a particular tissue, displaying a desired compressibility and viscosity, giving way as the tissue is disrupted, or exhibiting independent motion, such as that caused by pulsations in blood pressure. Although limited to one degree of freedom and with a relatively small range of displacement compared to other available haptic rendering devices, our design exhibits high bandwidth, low friction, low hysteresis, and low mass. These features are consistent with modeling interactions with delicate tissues during microsurgery. In addition, our haptic rendering device is designed to be simple and inexpensive to manufacture, in part through an innovative method of measuring displacement by existing variations in the speaker’s inductance as the voice coil moves over the permanent magnet. Low latency and jitter are achieved by running the real-time simulation models on a dedicated microprocessor, while maintaining bidirectional communication with a standard laptop computer for user controls and data logging.

  4. 6-DoF Haptic Rendering Using Continuous Collision Detection between Points and Signed Distance Fields.

    Science.gov (United States)

    Hongyi Xu; Barbic, Jernej

    2017-01-01

    We present an algorithm for fast continuous collision detection between points and signed distance fields, and demonstrate how to robustly use it for 6-DoF haptic rendering of contact between objects with complex geometry. Continuous collision detection is often needed in computer animation, haptics, and virtual reality applications, but has so far only been investigated for polygon (triangular) geometry representations. We demonstrate how to robustly and continuously detect intersections between points and level sets of the signed distance field. We suggest using an octree subdivision of the distance field for fast traversal of distance field cells. We also give a method to resolve continuous collisions between point clouds organized into a tree hierarchy and a signed distance field, enabling rendering of contact between rigid objects with complex geometry. We investigate and compare two 6-DoF haptic rendering methods now applicable to point-versus-distance field contact for the first time: continuous integration of penalty forces, and a constraint-based method. An experimental comparison to discrete collision detection demonstrates that the continuous method is more robust and can correctly resolve collisions even under high velocities and during complex contact.

  5. A predictive bone drilling force model for haptic rendering with experimental validation using fresh cadaveric bone.

    Science.gov (United States)

    Lin, Yanping; Chen, Huajiang; Yu, Dedong; Zhang, Ying; Yuan, Wen

    2017-01-01

    Bone drilling simulators with virtual and haptic feedback provide a safe, cost-effective and repeatable alternative to traditional surgical training methods. To develop such a simulator, accurate haptic rendering based on a force model is required to feedback bone drilling forces based on user input. Current predictive bone drilling force models based on bovine bones with various drilling conditions and parameters are not representative of the bone drilling process in bone surgery. The objective of this study was to provide a bone drilling force model for haptic rendering based on calibration and validation experiments in fresh cadaveric bones with different bone densities. Using a commonly used drill bit geometry (2 mm diameter), feed rates (20-60 mm/min) and spindle speeds (4000-6000 rpm) in orthognathic surgeries, the bone drilling forces of specimens from two groups were measured and the calibration coefficients of the specific normal and frictional pressures were determined. The comparison of the predicted forces and the measured forces from validation experiments with a large range of feed rates and spindle speeds demonstrates that the proposed bone drilling forces can predict the trends and average forces well. The presented bone drilling force model can be used for haptic rendering in surgical simulators.

  6. Color rendering of art paintings under CIE illuminants for normal and color deficient observers.

    Science.gov (United States)

    Maciel Linhares, João Manuel; Araújo Pinto, Paulo Daniel; Cardoso Nascimento, Sérgio Miguel

    2009-07-01

    Color rendering indices are used to access the quality of lighting but, in addition to other well-known limitations, are not defined for color deficient observers. We evaluated the quality of lighting for normal and color deficient observers in the context of art paintings by estimating the number of colors they perceive when looking at the paintings. Hyperspectral data from 11 oil paintings were analyzed to compute the number of discernible colors when the paintings were assumed rendered under 55 CIE illuminants. Models of color perception for normal and color deficient observers were applied in the estimates. It was found that the number of discernible colors for normal and color deficient observers had low correlation with traditional color rendering indices and that some three-band illuminants, like HP4, were found to be good for most cases, except for tritanopes. These results suggest that it may be possible to obtain good lighting conditions for normal and color deficient observers with an appropriate choice of the light source.

  7. Procedural generation and real-time rendering of a marine ecosystem

    Institute of Scientific and Technical Information of China (English)

    Rong LI; Xin DING; Jun-hao YU; Tian-yi GAO; Wen-ting ZHENG; Rui WANG; Hu-jun BAO

    2014-01-01

    Underwater scene is one of the most marvelous environments in the world. In this study, we present an efficient procedural modeling and rendering system to generate marine ecosystems for swim-through graphic applications. To produce realistic and natural underwater scenes, several techniques and algorithms have been presented and introduced. First, to distribute sealife naturally on a seabed, we employ an ecosystem simulation that considers the infl uence of the underwater environment. Second, we propose a two-level procedural modeling system to generate sealife with unique biological features. At the base level, a series of grammars are designed to roughly represent underwater sealife on a central processing unit (CPU). Then at the fi ne level, additional details of the sealife are created and rendered using graphic processing units (GPUs). Such a hybrid CPU-GPU framework best adopts sequential and parallel computation in modeling a marine ecosystem, and achieves a high level of performance. Third, the proposed system integrates dynamic simulations in the proposed procedural modeling process to support dynamic interactions between sealife and the underwater environment, where interactions and physical factors of the environment are formulated into parameters and control the geometric generation at the fi ne level. Results demonstrate that this system is capable of generating and rendering scenes with massive corals and sealife in real time.

  8. A proxy method for real-time 3-DOF haptic rendering of streaming point cloud data.

    Science.gov (United States)

    Rydén, Fredrik; Chizeck, Howard Jay

    2013-01-01

    This paper presents a new haptic rendering method for streaming point cloud data. It provides haptic rendering of moving physical objects using data obtained from RGB-D cameras. Thus, real-time haptic interaction with moving objects can be achieved using noncontact sensors. This method extends "virtual coupling"-based proxy methods in a way that does not require preprocessing of points and allows for spatial point cloud discontinuities. The key ideas of the algorithm are iterative motion of the proxy with respect to the points, and the use of a variable proxy step size that results in better accuracy for short proxy movements and faster convergence for longer movements. This method provides highly accurate haptic interaction for geometries in which the proxy can physically fit. Another advantage is a significant reduction in the risk of "pop through" during haptic interaction with dynamic point clouds, even in the presence of noise. This haptic rendering method is computationally efficient; it can run in real time on available personal computers without the need for downsampling of point clouds from commercially available depth cameras.

  9. Unconscious neural processing differs with method used to render stimuli invisible

    Directory of Open Access Journals (Sweden)

    Sergey Victor Fogelson

    2014-06-01

    Full Text Available Visual stimuli can be kept from awareness using various methods. The extent of processing that a given stimulus receives in the absence of awareness is typically used to make claims about the role of consciousness more generally. The neural processing elicited by a stimulus, however, may also depend on the method used to keep it from awareness, and not only on whether the stimulus reaches awareness. Here we report that the method used to render an image invisible has a dramatic effect on how category information about the unseen stimulus is encoded across the human brain. We collected fMRI data while subjects viewed images of faces and tools, that were rendered invisible using either continuous flash suppression (CFS or chromatic flicker fusion (CFF. In a third condition, we presented the same images under normal fully visible viewing conditions. We found that category information about visible images could be extracted from patterns of fMRI responses throughout areas of neocortex known to be involved in face or tool processing. However, category information about stimuli kept from awareness using CFS could be recovered exclusively within occipital cortex, whereas information about stimuli kept from awareness using CFF was also decodable within temporal and frontal regions. We conclude that unconsciously presented objects are processed differently depending on how they are rendered subjectively invisible. Caution should therefore be used in making generalizations on the basis of any one method about the neural basis of consciousness or the extent of information processing without consciousness.

  10. A Fast Ambient Occlusion Method for Real-Time Plant Rendering

    Institute of Scientific and Technical Information of China (English)

    Jun Teng; Marc Jaeger; Bao-Gang HU

    2007-01-01

    Global illumination effects are crucial for virtual plant rendering. Whereas real-time global illumination rendering of plants is impractical, ambient occlusion is an efficient alternative approximation. A tree model with millions of triangles is common, and the triangles can be considered as randomly distributed. The existing ambient occlusion methods fail to apply on such a type of object. In this paper, we present a new ambient occlusion method dedicated to real time plant rendering with limited user interaction. This method is a three-step ambient occlusion calculation framework which is suitable for a huge number of geometry objects distributed randomly in space. The complexity of the proposed algorithm is O(n), compared to the conventional methods with complexities of O(n2). Furthermore, parameters in this method can be easily adjusted to achieve flexible ambient occlusion effects. With this ambient occlusion calculation method, we can manipulate plant models with millions of organs, as well as geometry objects with large number of randomly distributed components with affordable time, and with perceptual quality comparable to the previous ambient occlusion methods.

  11. The Role of Rendering in the Competence Project in Measurement Science for Optical Reflection and Scattering.

    Science.gov (United States)

    Westlund, Harold B; Meyer, Gary W; Hunt, Fern Y

    2002-01-01

    Computer rendering is used to simulate the appearance of lighted objects for applications in architectural design, for animation and simulation in the entertainment industry, and for display and design in the automobile industry. Rapid advances in computer graphics technology suggest that in the near future it will be possible to produce photorealistic images of coated surfaces from scattering data. This could enable the identification of important parameters in the coatings manufacturing process that lead to desirable appearance, and to the design of virtual surfaces by visualizing prospective coating formulations once their optical properties are known. Here we report the results of our work to produce visually and radiometrically accurate renderings of selected appearance attributes of sample coated surfaces. It required changes in the rendering programs, which in general are not designed to accept high quality optical and material measurements, and changes in the optical measurement protocols. An outcome of this research is that some current ASTM standards can be replaced or enhanced by computer based standards of appearance.

  12. Fast Time-Varying Volume Rendering Using Time-Space Partition (TSP) Tree

    Science.gov (United States)

    Shen, Han-Wei; Chiang, Ling-Jen; Ma, Kwan-Liu

    1999-01-01

    We present a new, algorithm for rapid rendering of time-varying volumes. A new hierarchical data structure that is capable of capturing both the temporal and the spatial coherence is proposed. Conventional hierarchical data structures such as octrees are effective in characterizing the homogeneity of the field values existing in the spatial domain. However, when treating time merely as another dimension for a time-varying field, difficulties frequently arise due to the discrepancy between the field's spatial and temporal resolutions. In addition, treating spatial and temporal dimensions equally often prevents the possibility of detecting the coherence that is unique in the temporal domain. Using the proposed data structure, our algorithm can meet the following goals. First, both spatial and temporal coherence are identified and exploited for accelerating the rendering process. Second, our algorithm allows the user to supply the desired error tolerances at run time for the purpose of image-quality/rendering-speed trade-off. Third, the amount of data that are required to be loaded into main memory is reduced, and thus the I/O overhead is minimized. This low I/O overhead makes our algorithm suitable for out-of-core applications.

  13. Approach for optimization of the color rendering index of light mixtures.

    Science.gov (United States)

    Lin, Ku Chin

    2010-07-01

    The general CIE color rendering index (CRI) of light is an important index to evaluate the quality of illumination. However, because of the complexity in measurement of the rendering ability under designated constraints, an approach for general mathematical formulation and global optimization of the rendering ability of light emitting diode (LED) light mixtures is difficult to develop. This study is mainly devoted to developing mathematical formulation and a numerical method for the CRI optimization. The method is developed based on the so-called complex method [Computer J.8, 42 (1965); G. V. Reklaitis et al., Engineering Optimization-Methods and Applications (Wiley, 1983)] with modifications. It is first applicable to 3-color light mixtures and then extended to a hierarchical and iterative structure for higher-order light mixtures. The optimization is studied under the constraints of bounded relative intensities of the light mixture, designated correlated color temperature (CCT), and the required approximate white of the light mixture. The problems of inconsistent constraints and solutions are addressed. The CRI is a complicated function of the relative intensities of the compound illuminators of the mixture. The proposed method requires taking no derivatives of the function and is very adequate for the optimization. This is demonstrated by simulation for RGBW LED light mixtures. The results show that global and unique convergence to the optimal within required tolerances for CRI and spatial dispersivity is always achieved.

  14. CT portography by multidetector helical CT. Comparison of three rendering models

    Energy Technology Data Exchange (ETDEWEB)

    Nakayama, Yoshiharu; Imuta, Masanori; Funama, Yoshinori; Kadota, Masataka; Utsunomiya, Daisuke; Shiraishi, Shinya; Hayashida, Yoshiko; Yamashita, Yasuyuki [Kumamoto Univ. (Japan). School of Medicine

    2002-12-01

    The purpose of this study was to assess the value of multidetector CT portography in visualizing varices and portosystemic collaterals in comparison with conventional portography, and to compare the visualizations obtained by three rendering models (volume rendering, VR; minimum intensity projection, MIP; and shaded surface display, SSD). A total of 46 patients with portal hypertension were examined by CT and conventional portography for evaluation of portosystemic collaterals. CT portography was performed by multidetector CT (MD-CT) scanner with a slice thickness of 2.5 mm and table feed of 7.5 mm. Three types of CT portographic models were generated and compared with transarterial portography. Among 46 patients, 48 collaterals were identified on CT transverse images, while 38 collaterals were detected on transarterial portography. Forty-four of 48 collaterals identified on CT transverse images were visualized with the MIP model, while 34 and 29 collaterals were visualized by the VR and SSD methods, respectively. The average CT value for the portal vein and varices was 198 HU with data acquisition of 50 sec after contrast material injection. CT portography by multidetector CT provides excellent images in the visualization of portosystemic collaterals. The images of collaterals produced by MD-CT are superior to those of transarterial portography. Among the three rendering techniques, MIP provides the best visualization of portosystemic collaterals. (author)

  15. Oral history in radiography: Listening to pioneers

    Energy Technology Data Exchange (ETDEWEB)

    Ferris, Christine [International Development Facilitator, Robert Winston Building, Faculty of Health and Wellbeing, Sheffield Hallam University, Sheffield S10 2BP (United Kingdom)], E-mail: c.m.ferris@shu.ac.uk; Winslow, Michelle [University of Sheffield, Oral History Society, Academic Unit of Supportive Care, Sykes House, Little Common Lane, Sheffield S11 9NE (United Kingdom)], E-mail: m.winslow@sheffield.ac.uk

    2009-12-15

    We explore the professional value of the collection and analysis of oral histories in the history of radiography. Drawing on oral histories collected from radiographers, we analyse accounts of experiences to identify common themes, some of which are of current significance, whilst others have faded from existence. 15 oral histories were collected from radiographers whose combined practice spans the years 1930-1973. The sample consists of 6 male and 9 female radiographers. Themes identified in the oral histories include radiographers as invisible pioneers who worked in professionally unclaimed territory and their dangerous working environment. The oral histories reveal the working world of the radiographer as having encompassed a practice ethos where challenges became an accepted part of work. We gain insight into less observable aspects of the radiographer's role, the difficulties they faced, how they invented techniques and equipment, and how they managed their practice including protecting the public from ionising radiation sources.

  16. Happiness, subjective and objective oral health status, and oral health behaviors among Korean elders.

    Science.gov (United States)

    Yoon, Hyun-Seo; Kim, Hae-Young; Patton, Lauren L; Chun, Jin-Ho; Bae, Kwang-Hak; Lee, Mi-Ok

    2013-10-01

    This study aims to comprehensively assess the association of subjective and objective oral health status and oral health behaviors with happiness, under consideration of demographic, socioeconomic, and general health-related factors. This study also aims to test whether subjective oral health outcomes are better predictors of happiness compared with objective oral health outcomes. The data were collected from 479 community-dwelling elders aged 65 years or over selected by a cluster sampling method. A questionnaire and an oral examination were implemented. A multiple regression method was conducted to assess associations with happiness index (HI). The mean age of the elders was 74.6 years. Mean (standard deviation, SD) HI, EuroQol-visual analog scale (EQ-VAS) and 14-item oral health impact profile (OHIP-14) index were 5.7 (SD 2.3), 59.8 (SD 21.1), and 16.3 (SD 13.1). In the final model, a significant association with HI of the OHIP-14 index (P = 0.091) among all the participants and significant associations of oral symptoms (P = 0.038), wearing a removable denture (P = 0.039), and of the oral health behavior of daily toothbrushing (P = 0.007) among poorer oral health QoL group were confirmed under consideration of other related factors. While correlations of HI to subjective measures of health, EQ-VAS and OHIP-14 score were moderate to weak, those to objective measures of health were only weak or insignificant. Oral impacts which might persistently affect one's daily life need to be considered in designing and delivering public services aimed to promote people's happiness. With oral health impacts and behaviors accounting for 10% of happiness among elders, public and community services for the elderly that support oral health and daily toothbrushing for the dentate are critical for the well-being of our elders. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  17. Medical outcomes associated with prescription opioid abuse via oral and non-oral routes of administration.

    Science.gov (United States)

    Green, Jody L; Bucher Bartelson, Becki; Le Lait, M Claire; Roland, Carl L; Masters, Elizabeth T; Mardekian, Jack; Bailey, J Elise; Dart, Richard C

    2017-06-01

    Prescription opioid abuse and misuse is a serious and growing public health issue. While the most common form of abuse is swallowing intact tablets/capsules, some abusers manipulate, or tamper with, these medications by altering the dosage form to allow for non-oral routes of administration (e.g., injection, inhalation) in order to achieve more rapid or enhanced psychoactive effects. Because administration of opioids via non-oral routes results in greater systemic availability and more rapid central nervous system penetration, we hypothesized that death and major medical outcomes occur more frequently with non-oral routes compared to oral route alone. This retrospective cohort study analyzed data from the Researched Abuse, Diversion and Addiction-Related Surveillance (RADARS) System Poison Center Program to investigate relative risk of prescription opioid abuse via oral and non-oral routes. While the oral route was the most commonly reported route of abuse (64.0%), non-oral routes were reported in 14.6% exposures and unknown routes in 21.4% exposures. The relative risk of an exposure resulting in death or major effect was 2.43 (95% CI 1.97, 2.99) if non-oral routes were reported compared to exposures involving oral route only. Analysis of acute health events recorded by poison centers indicates that death or major effects are twice as likely to occur with intentional abuse of prescription opioids via non-oral routes of administration than ingestion alone. Effective interventions to prevent abuse via non-oral routes of solid dosage forms of prescription opioids, such as abuse-deterrent formulations could have a significant public health impact. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

  18. The lime renderings from plaza de la Corredera, Córdoba

    Directory of Open Access Journals (Sweden)

    González, T.

    2002-09-01

    Full Text Available The causes of the pathologies found on the lime renderings from Plaza de la Corredera façades are analysed in this study. For this purpose, the mineralogical and chemical analyses of the building materials -brickwork and rendering mortar- has been carried out, as well as their physical, hydric and mechanical properties have been determined. The obtained results from both unaltered and altered materials, and the analysis of the rendering's raw materials, have allowed us to establish that rendering deterioration is connected to the presence of saline compounds (gypsum, halite, which existing in the brickwork substratum, have been removed due to the water saturation of such brickwork. The main cause responsible of the alteration forms - efflorescence, crusts, grain-disintegration, bulging, flaking found on the renderings, has been the salts precipitation (halite, hexahydrite, epsomite in their way towards the external surface.

    En este estudio se analizan las causas de las patologías de los revocos de cal de las fachadas de la Plaza de la Corredera. Para ello se ha realizado el análisis mineralógico y químico de los materiales de construcción - fábrica de ladrillo y mortero de revestimiento- y se han determinado sus propiedades físicas, hídricas y mecánicas. Mediante la comparación de los resultados obtenidos en los materiales inalterados y en los alterados, así como una vez analizadas las materias primas utilizadas en la realización del revoco, se ha podido establecer que la alteración de este último está relacionada con la existencia de compuestos salinos (yeso, halita que, presentes en el substrato de fábrica de ladrillo, se han exudado por saturación de agua de la misma. La precipitación de las sales (halita, hexahidrita, epsomita en su migración hacia el exterior ha sido la principal responsable de las formas de alteración -eflorescencias, costras, arenización, abombamientos, descamaciones- que aparecen sobre los

  19. Ethical considerations in community oral health.

    Science.gov (United States)

    Naidoo, Sudeshni

    2015-05-01

    As the public's oral health care needs increase in complexity, there is renewed attention to the ethical dimensions of community oral health decision making and the development of public health ethics in teaching and research in dentistry. Despite their reduction globally, oral diseases persist with a particular distribution pattern that is a reflection of the increasingly widespread inequality in access to community oral health preventive and dental care. This is due to differences in the appropriateness, availability, accessibility, and acceptability of oral health education and the care provided. This article provides an overview of community oral health from an ethical perspective, including the importance of equity, human rights, and social justice in providing oral health care to the underserved. The need for a paradigm shift from highly technical and individualistic dental training curricula is discussed, together with the need to instill a holistic approach to ethical and social responsibility in new dental graduates. It concludes with some possible strategies, using the overarching principles of ethics and bioethics that are applicable to practice among vulnerable populations.

  20. Public Speech.

    Science.gov (United States)

    Green, Thomas F.

    1994-01-01

    Discusses the importance of public speech in society, noting the power of public speech to create a world and a public. The paper offers a theory of public speech, identifies types of public speech, and types of public speech fallacies. Two ways of speaking of the public and of public life are distinguished. (SM)

  1. Public Claims: A Legal Evaluation

    Directory of Open Access Journals (Sweden)

    Tamer Budak

    2011-04-01

    Full Text Available In order for a claim to exist, the host there has to be two parties. In case of public claims one of the parties is the state, special provincial administration and municipalities; while the debtor consists of the natural and legal persons. The definition of public claims is provided by The Procedure Law of Collection of Public Claims. One claims, the quality of the public claims not cause any, may be excluded from the scope of Law No. 6183. All the claims of public administration are not public claims. However, any private claim can have the security of a public claim. For this reason the criteria used to define a public claim differ. Arrangements, which can render a public claim a privileged claim, exist in the relevant Code. The aim of this study is to define the concept of public claim expressed in the relevant code and to determine the conditions under which a claim not stated in the Code can be considered a public claim in the light of court decisions.

  2. Public participation in environmental impact assessment: why, who and how?

    NARCIS (Netherlands)

    Glucker, A.N.; Driessen, P.P.J.; Kolhoff, A.J.; Runhaar, H.A.C.

    2013-01-01

    Even a cursory glance at the literature on environmental impact assessment (EIA) reveals that public participation is being considered as an integral part of the assessment procedure. Public participation in EIA is commonly deemed to foster democratic policy-making and to render EIA more effective.

  3. Simultaneous visualization of anatomical and functional 3D data by combining volume rendering and flow visualization

    Science.gov (United States)

    Schafhitzel, Tobias; Rößler, Friedemann; Weiskopf, Daniel; Ertl, Thomas

    2007-03-01

    Modern medical imaging provides a variety of techniques for the acquisition of multi-modality data. A typical example is the combination of functional and anatomical data from functional Magnetic Resonance Imaging (fMRI) and anatomical MRI measurements. Usually, the data resulting from each of these two methods is transformed to 3D scalar-field representations to facilitate visualization. A common method for the visualization of anatomical/functional multi-modalities combines semi-transparent isosurfaces (SSD, surface shaded display) with other scalar visualization techniques like direct volume rendering (DVR). However, partial occlusion and visual clutter that typically result from the overlay of these traditional 3D scalar-field visualization techniques make it difficult for the user to perceive and recognize visual structures. This paper addresses these perceptual issues by a new visualization approach for anatomical/functional multi-modalities. The idea is to reduce the occlusion effects of an isosurface by replacing its surface representation by a sparser line representation. Those lines are chosen along the principal curvature directions of the isosurface and rendered by a flow visualization method called line integral convolution (LIC). Applying the LIC algorithm results in fine line structures that improve the perception of the isosurface's shape in a way that it is possible to render it with small opacity values. An interactive visualization is achieved by executing the algorithm completely on the graphics processing unit (GPU) of modern graphics hardware. Furthermore, several illumination techniques and image compositing strategies are discussed for emphasizing the isosurface structure. We demonstrate our method for the example of fMRI/MRI measurements, visualizing the spatial relationship between brain activation and brain tissue.

  4. Advantages and disadvantages of 3D ultrasound of thyroid nodules including thin slice volume rendering

    Directory of Open Access Journals (Sweden)

    Slapa Rafal

    2011-01-01

    Full Text Available Abstract Background The purpose of this study was to assess the advantages and disadvantages of 3D gray-scale and power Doppler ultrasound, including thin slice volume rendering (TSVR, applied for evaluation of thyroid nodules. Methods The retrospective evaluation by two observers of volumes of 71 thyroid nodules (55 benign, 16 cancers was performed using a new TSVR technique. Dedicated 4D ultrasound scanner with an automatic 6-12 MHz 4D probe was used. Statistical analysis was performed with Stata v. 8.2. Results Multiple logistic regression analysis demonstrated that independent risk factors of thyroid cancers identified by 3D ultrasound include: (a ill-defined borders of the nodule on MPR presentation, (b a lobulated shape of the nodule in the c-plane and (c a density of central vessels in the nodule within the minimal or maximal ranges. Combination of features provided sensitivity 100% and specificity 60-69% for thyroid cancer. Calcification/microcalcification-like echogenic foci on 3D ultrasound proved not to be a risk factor of thyroid cancer. Storage of the 3D data of the whole nodules enabled subsequent evaluation of new parameters and with new rendering algorithms. Conclusions Our results indicate that 3D ultrasound is a practical and reproducible method for the evaluation of thyroid nodules. 3D ultrasound stores volumes comprising the whole lesion or organ. Future detailed evaluations of the data are possible, looking for features that were not fully appreciated at the time of collection or applying new algorithms for volume rendering in order to gain important information. Three-dimensional ultrasound data could be included in thyroid cancer databases. Further multicenter large scale studies are warranted.

  5. Use of Poultry Collagen Coating and Antioxidants as Flavor Protection for Cat Foods Made with Rendered Poultry Fat

    OpenAIRE

    Greene, Donna Mechelle

    2003-01-01

    Poultry skins and rendered poultry fat are by-products produced in excess at rendering plants. The use of low value by-products such as poultry collagen, from poultry skins, and fat to improve flavor and quality in dry pet food could be economically attractive. This study examined a poultry collagen coating as a protective barrier against oxidation in dry cat food made with rendered poultry fat. Collagen was extracted from chicken skins, dissolved in an acidic solution, applied to dry cat foo...

  6. Finite Element Analysis of External Thermal Insulation Composite System: Thin Rendered Expanded Polystyrene Board

    Institute of Scientific and Technical Information of China (English)

    BO Hai-tao; LI Hui-qiang; YIN Xiu-qin

    2009-01-01

    The finite element model of an external thermal composite insulation system, thin rendered expanded polystyrene (EPS) board, was built with ANSYS 1.0, which had two forms: one with window and one without window. The finite element analysis results show that the EPS board had very good insulation capacity at both high or low temperature, stress concentration was produced in the center of wall and around window, and the maximum deformation was observed at the edge of board and the minimum deformation was in the center.

  7. prM-antibody renders immature West Nile virus infectious in vivo.

    Science.gov (United States)

    Colpitts, Tonya M; Rodenhuis-Zybert, Izabela; Moesker, Bastiaan; Wang, Penghua; Fikrig, Erol; Smit, Jolanda M

    2011-10-01

    West Nile virus (WNV) is a member of the family Flaviviridae and is a neurotropic pathogen responsible for severe human disease. Flavivirus-infected cells release virus particles that contain variable numbers of precursor membrane (prM) protein molecules at the viral surface. Consequently, antibodies are produced against the prM protein. These antibodies have been shown to activate the infectious potential of fully immature flavivirus particles in vitro. Here, we provide in vivo proof that prM antibodies render immature WNV infectious. Infection with antibody-opsonized immature WNV particles caused disease and death of mice, and infectious WNV was found in the brains and sera.

  8. PH-spline approximation for Bézier curve and rendering offset

    Institute of Scientific and Technical Information of China (English)

    郑志浩; 汪国昭

    2004-01-01

    In this paper,a G1, C1, C2 PH-spline is employed as an approximation for a given Bézier curve within error bound and further renders offset which can be regarded as an approximate offset to the Bézier curve. The errors between PH-spline and the Bézier curve, the offset to PH-spline and the offset to the given Bézier curve are also estimated. A new algorithm for constructing offset to the Bézier curve is proposed.

  9. Use of multidetector row CT with volume renderings in right lobe living liver transplantation

    Energy Technology Data Exchange (ETDEWEB)

    Ishifuro, Minoru; Akiyama, Yuji; Kushima, Toshio [Department of Radiology, Hiroshima University Medical Hospital, 1-2-3, Kasumi-cho, Minami-ku, Hiroshima 734-8551 (Japan); Horiguchi, Jun; Nakashige, Aya; Tamura, Akihisa; Marukawa, Kazushi; Fukuda, Hiroshi; Ono, Chiaki; Ito, Katsuhide [Department of Radiology, Division of Medical Intelligence and Informatics, Programs for Applied Biomedicine, Graduate School of Biomedical Science, Hiroshima University, 1-2-3, Kasumi-cho, Minami-ku, Hiroshima 734-8551 (Japan)

    2002-10-01

    Multidetector row CT is a feasible diagnostic tool in pre- and postoperative liver partial transplantation. We can assess vascular anatomy and liver parenchyma as well as volumetry, which provide useful information for both donor selection and surgical planning. Disorders of the vascular and biliary systems are carefully observed in recipients. In addition, we evaluate liver regeneration of both the donor and the recipient by serial volumetry. We present how multidetector row CT with state-of-the-art three-dimensional volume renderings may be used in right lobe liver transplantation. (orig.)

  10. Some improvements of the marching cubes algorithm for the rendering of an orebody

    Institute of Scientific and Technical Information of China (English)

    LI Chun-min; LI Zhong-xue; WANG Yun-hai; HAO Xiu-qiang

    2008-01-01

    Orebody-rendering techniques are developed using the marching cubes (MC) algorithm. The shape of an orebody is vi- vidly displayed in real time and can be used to guide mining design as well. The MC algorithm has been improved in two aspects. By analyzing the principles of the MC algorithm, as well as the features of the specific application, improvements were developed to: eliminate ambiguities by using a unified isosurface constructing method in the voxels, and improve the operating efficiency of the MC algorithm by incorporating an octree structure. The analytical results of the examples demonstrate the effectiveness of our proposal.

  11. Emerging technologies for 3D video creation, coding, transmission and rendering

    CERN Document Server

    Dufaux, Frederic; Cagnazzo, Marco

    2013-01-01

    With the expectation of greatly enhanced user experience, 3D video is widely perceived as the next major advancement in video technology. In order to fulfil the expectation of enhanced user experience, 3D video calls for new technologies addressing efficient content creation, representation/coding, transmission and display. Emerging Technologies for 3D Video will deal with all aspects involved in 3D video systems and services, including content acquisition and creation, data representation and coding, transmission, view synthesis, rendering, display technologies, human percepti

  12. High-power graphic computers for visual simulation: a real-time--rendering revolution

    Science.gov (United States)

    Kaiser, M. K.

    1996-01-01

    Advances in high-end graphics computers in the past decade have made it possible to render visual scenes of incredible complexity and realism in real time. These new capabilities make it possible to manipulate and investigate the interactions of observers with their visual world in ways once only dreamed of. This paper reviews how these developments have affected two preexisting domains of behavioral research (flight simulation and motion perception) and have created a new domain (virtual environment research) which provides tools and challenges for the perceptual psychologist. Finally, the current limitations of these technologies are considered, with an eye toward how perceptual psychologist might shape future developments.

  13. Efficient rendering and compression for full-parallax computer-generated holographic stereograms

    Science.gov (United States)

    Kartch, Daniel Aaron

    2000-10-01

    In the past decade, we have witnessed a quantum leap in rendering technology and a simultaneous increase in usage of computer generated images. Despite the advances made thus far, we are faced with an ever increasing desire for technology which can provide a more realistic, more immersive experience. One fledgling technology which shows great promise is the electronic holographic display. Holograms are capable of producing a fully three-dimensional image, exhibiting all the depth cues of a real scene, including motion parallax, binocular disparity, and focal effects. Furthermore, they can be viewed simultaneously by any number of users, without the aid of special headgear or position trackers. However, to date, they have been limited in use because of their computational intractability. This thesis deals with the complex task of computing a hologram for use with such a device. Specifically, we will focus on one particular type of hologram: the holographic stereogram. A holographic stereogram is created by generating a large set of two-dimensional images of a scene as seen from multiple camera points, and then converting them to a holographic interference pattern. It is closely related to the light fields or lumigraphs used in image-based rendering. Most previous algorithms have treated the problem of rendering these images as independent computations, ignoring a great deal of coherency which could be used to our advantage. We present a new computationally efficient algorithm which operates on the image set as a whole, rather than on its individual elements. Scene polygons are mapped by perspective projection into a four-dimensional space, where they are scan-converted into 4D color and depth buffers. We use a set of very simple data structures and basic operations to form an algorithm which will lend itself well to future hardware implementation, so as to drive a real-time holographic display. We also examined issues related to the compression of stereograms

  14. Harvesting oral mucosa for one-stage anterior urethroplasty

    Directory of Open Access Journals (Sweden)

    Sanjay Balwant Kulkarni

    2014-01-01

    Full Text Available Oral mucosa has been the most popular substitute material for urethral reconstructive surgery because it is easy to harvest, is easy to access, has a concealed donor site scar, and obviates most of the problems associated with other grafts. However, the success of using oral mucosa for urethral surgery is mainly attributed to the biological properties of this tissue. Herein, the surgical steps of harvesting oral mucosa from the inner cheek are presented with an emphasis on tips and tricks to render the process easier and more reproducible and to prevent intra and post-operative complications. The following steps are emphasized: Nasal intubation, ovoid shape graft, delicate harvesting leaving the muscle intact, donor site closure and removal of submucosal tissue.

  15. Archaeal lipids in oral delivery of therapeutic peptides

    DEFF Research Database (Denmark)

    Jacobsen, Ann-Christin; Jensen, Sara M; Fricker, Gert;

    2017-01-01

    tetraether lipids. The inherent chemical stability and unique membrane-spanning characteristics of tetraether lipids render them interesting for oral drug delivery purposes. Archaeal lipids form liposomes spontaneously (archaeosomes) and may be incorporated in conventional liposomes (mixed vesicles). Both...... types of liposomes are promising to protect their drug cargo, such as therapeutic peptides, against the acidic environment of the stomach and proteolytic degradation in the intestine. They appear to withstand lipolytic enzymes and bile salts and may thus deliver orally administered therapeutic peptides...... to distant sections of the intestine or to the colon, where they may be absorbed, eventually by the help of absorption enhancers. Archaeal lipids and their semisynthetic derivatives may thus serve as biological source for the next generation oral drug delivery systems. The aim of this review is to present...

  16. Oral Cancer Exam

    Medline Plus

    Full Text Available ... and Deadlines Grant Application Forms Application Receipt Dates Electronic Submission of Applications Grants 101 (How to Write ... detection and treatment of oral cancers. Note: For materials specific to African American men, please see: Oral ...

  17. Oral Appliances Therapy

    Science.gov (United States)

    ... your sleep doctor may schedule you for a sleep study to verify treatment success. Follow-Up Visits Follow-up visits with your dentist will be needed to ensure the optimal fit of the oral appliance. Effective oral appliances ...

  18. Oral Cancer Exam

    Medline Plus

    Full Text Available ... See All Oral Complications of Systemic Diseases Cancer Treatment Developmental Disabilities Diabetes Heart Disease HIV/AIDS See ... this brochure includes information on symptoms, diagnosis, and treatment of oral cancer, along with definitions of selected ...

  19. Oral Cancer Exam

    Medline Plus

    Full Text Available ... the exam can detect oral cancer early—when it can be treated more successfully. Publications​ For Health ... and the importance of detecting the disease in its early stages. The Oral Cancer Exam Step-by- ...

  20. Oral Cancer Exam

    Medline Plus

    Full Text Available ... Oral Complications of Systemic Diseases Cancer Treatment Developmental Disabilities Diabetes Heart Disease HIV/AIDS See All Order ... Education Practical Oral Care for People With Developmental Disabilities – This booklet presents an overview of physical, mental, ...

  1. Oral Cancer Exam

    Medline Plus

    Full Text Available ... diagnosis, and treatment of oral cancer, along with definitions of selected medical terms and resource information. Oral ... of Dental and Craniofacial Research National Institutes of Health Bethesda, MD 20892-2190 301-496-4261 NIH… ...

  2. Oral Cancer Exam

    Medline Plus

    Full Text Available ... See All Oral Complications of Systemic Diseases Cancer Treatment Developmental Disabilities Diabetes Heart Disease HIV/AIDS See ... this brochure includes information on symptoms, diagnosis, and treatment of oral cancer, along with definitions of selected ...

  3. Oral Cancer Exam

    Medline Plus

    Full Text Available ... and College Students Recent College Graduates Dental and Medical Students See All Careers & Training Opportunities Job Openings ... of oral cancer, along with definitions of selected medical terms and resource information. Oral Cancer A fact ...

  4. Oral Cancer Exam

    Medline Plus

    Full Text Available ... the exam can detect oral cancer early—when it can be treated more successfully. Publications​ For Health ... and the importance of detecting the disease in its early stages. The Oral Cancer Exam Step-by- ...

  5. Misrepresentation of surface rendering of pediatric brain malformations performed following spatial normalization.

    Science.gov (United States)

    Wallis, L I; Widjaja, E; Wignall, E L; Wilkinson, I D; Griffiths, P D

    2006-12-01

    To evaluate the effects of spatial normalization on volume rendering in cases of pediatric brain malformation. Three-dimensional (3D) T1-weighted volume datasets were acquired in three children, one with pachygyria, one with a Dandy-Walker malformation associated with polymicrogyria, and one with dysgenesis of the corpus callosum. On the non-normalized datasets, the skull margins were cropped and the remainder stripped with the brain extraction technique (BET). The data were also normalized into standard anatomic reference space using pediatric templates prior to the BET script. The surface constructions obtained by both techniques were then compared for geometric distortions. Normalization of 3D datasets resulted in significant distortions in the shape of the brain, with increased anterior-posterior dimensions and narrower transverse diameter in all three cases. In two cases, there were alterations in the appearance of the gyri and sulci, leading to a potential misinterpretation of the volume-rendered surface when the gyri and sulci were in fact normal. In pediatric brain, particularly those with congenital brain anomalies, normalization as a post-processing step should be avoided as this may lead to misrepresentation of brain morphometry.

  6. State of the Art in Transfer Functions for Direct Volume Rendering

    KAUST Repository

    Ljung, Patric

    2016-07-04

    A central topic in scientific visualization is the transfer function (TF) for volume rendering. The TF serves a fundamental role in translating scalar and multivariate data into color and opacity to express and reveal the relevant features present in the data studied. Beyond this core functionality, TFs also serve as a tool for encoding and utilizing domain knowledge and as an expression for visual design of material appearances. TFs also enable interactive volumetric exploration of complex data. The purpose of this state-of-the-art report (STAR) is to provide an overview of research into the various aspects of TFs, which lead to interpretation of the underlying data through the use of meaningful visual representations. The STAR classifies TF research into the following aspects: dimensionality, derived attributes, aggregated attributes, rendering aspects, automation, and user interfaces. The STAR concludes with some interesting research challenges that form the basis of an agenda for the development of next generation TF tools and methodologies. © 2016 The Author(s) Computer Graphics Forum © 2016 The Eurographics Association and John Wiley & Sons Ltd. Published by John Wiley & Sons Ltd.

  7. Adaptive sampling for real-time rendering of large terrain based on B-spline wavelet

    Science.gov (United States)

    Kalem, Sid Ali; Kourgli, Assia

    2017-05-01

    This paper describes a central processing unit (CPU)-based technique for terrain geometry rendering that could relieve graphics processing unit (GPU) from processing the appropriate level of detail (LOD) of the geometric surface. The proposed approach alleviates the computational load on the CPU and approaches GPU-based efficiency. As the datasets of realistic terrains are usually huge for real-time rendering, we suggest using a training stage to handle large tiled QuadTree terrain representation. The training stage is based on multiresolution wavelet decomposition and is used to limit the region of error control inside the tile. Maximum approximation errors are then calculated for each tile at different resolutions. Maximum world-space errors of the tile at different resolutions permit selection of the appropriate resolution of downsampling that will represent the tile at the run time. Tests and experiments demonstrate that B-spline 0 and B-spline 1 wavelets, well known for their properties of localization and their compact support, are suitable for fast and accurate localization of the maximum approximation error. The experimental results demonstrate that the proposed approach drastically reduces computation time in the CPU. Such a technique should also be used on low/medium end PCs, and embedded systems that are not equipped with the latest models of graphic hardware.

  8. Signal Processing Implementation and Comparison of Automotive Spatial Sound Rendering Strategies

    Directory of Open Access Journals (Sweden)

    Bai MingsianR

    2009-01-01

    Full Text Available Design and implementation strategies of spatial sound rendering are investigated in this paper for automotive scenarios. Six design methods are implemented for various rendering modes with different number of passengers. Specifically, the downmixing algorithms aimed at balancing the front and back reproductions are developed for the 5.1-channel input. Other five algorithms based on inverse filtering are implemented in two approaches. The first approach utilizes binaural (Head-Related Transfer Functions HRTFs measured in the car interior, whereas the second approach named the point-receiver model targets a point receiver positioned at the center of the passenger's head. The proposed processing algorithms were compared via objective and subjective experiments under various listening conditions. Test data were processed by the multivariate analysis of variance (MANOVA method and the least significant difference (Fisher's LSD method as a post hoc test to justify the statistical significance of the experimental data. The results indicate that inverse filtering algorithms are preferred for the single passenger mode. For the multipassenger mode, however, downmixing algorithms generally outperformed the other processing techniques.

  9. INCREASING SAVING BEHAVIOR THROUGH AGE-PROGRESSED RENDERINGS OF THE FUTURE SELF.

    Science.gov (United States)

    Hershfield, Hal E; Goldstein, Daniel G; Sharpe, William F; Fox, Jesse; Yeykelis, Leo; Carstensen, Laura L; Bailenson, Jeremy N

    2011-11-01

    Many people fail to save what they need to for retirement (Munnell, Webb, and Golub-Sass 2009). Research on excessive discounting of the future suggests that removing the lure of immediate rewards by pre-committing to decisions, or elaborating the value of future rewards can both make decisions more future-oriented. In this article, we explore a third and complementary route, one that deals not with present and future rewards, but with present and future selves. In line with thinkers who have suggested that people may fail, through a lack of belief or imagination, to identify with their future selves (Parfit 1971; Schelling 1984), we propose that allowing people to interact with age-progressed renderings of themselves will cause them to allocate more resources toward the future. In four studies, participants interacted with realistic computer renderings of their future selves using immersive virtual reality hardware and interactive decision aids. In all cases, those who interacted with virtual future selves exhibited an increased tendency to accept later monetary rewards over immediate ones.

  10. Fast computer-generated hologram computation using rendered depth map image

    Science.gov (United States)

    Kazempourradi, Seyedmahdi; Ulusoy, Erdem; Urey, Hakan

    2017-03-01

    We propose a method for computing realistic computer-generated holograms (CGHs) of three-dimensional (3D) objects, where we benefit from well-established graphical processing units (GPUs) and computer graphics techniques to handle occlusion, shading and parallax effects. The graphics render provides a 2D perspective image including occlusion and shading effects. We also extract the depth map data of the scene. The intensity values and 3D positions of object points are extracted by combining the rendered intensity image and the depth map (Z-buffer) image. We divide the depth range into several planes and quantize the depth value of 3D image points to the nearest plane. In the CGH computation part, we perform proper Fresnel transformations of these planar objects and sum them up to create the hologram corresponding to the particular viewpoint. We then repeat the entire procedure for all possible viewpoints and cover the hologram area. The experimental results show that the technique is capable of performing high quality reconstructions in a fast manner.

  11. Addition of Grape Seed Extract Renders Phosphoric Acid a Collagen-stabilizing Etchant.

    Science.gov (United States)

    Liu, Y; Dusevich, V; Wang, Y

    2014-08-01

    Previous studies found that grape seed extract (GSE), which is rich in proanthocyanidins, could protect demineralized dentin collagen from collagenolytic activities following clinically relevant treatment. Because of proanthocyanidin's adverse interference to resin polymerization, it was believed that GSE should be applied and then rinsed off in a separate step, which in effect increases the complexity of the bonding procedure. The present study aimed to investigate the feasibility of combining GSE treatment with phosphoric acid etching to address the issue. It is also the first attempt to formulate collagen-cross-linking dental etchants. Based on Fourier-transformed infrared spectroscopy and digestion assay, it was established that in the presence of 20% to 5% phosphoric acid, 30 sec of GSE treatment rendered demineralized dentin collagen inert to bacterial collagenase digestion. Based on this positive result, the simultaneous dentin etching and collagen protecting of GSE-containing phosphoric acid was evaluated on the premise of a 30-second etching time. According to micro-Raman spectroscopy, the formulation containing 20% phosphoric acid was found to lead to overetching. Based on scanning and transmission electronic microscopy, this same formulation exhibited unsynchronized phosphoric acid and GSE penetration. Therefore, addition of GSE did render phosphoric acid a collagen-stabilizing etchant, but the preferable phosphoric acid concentration should be <20%.

  12. 3D-TV System with Depth-Image-Based Rendering Architectures, Techniques and Challenges

    CERN Document Server

    Zhao, Yin; Yu, Lu; Tanimoto, Masayuki

    2013-01-01

    Riding on the success of 3D cinema blockbusters and advances in stereoscopic display technology, 3D video applications have gathered momentum in recent years. 3D-TV System with Depth-Image-Based Rendering: Architectures, Techniques and Challenges surveys depth-image-based 3D-TV systems, which are expected to be put into applications in the near future. Depth-image-based rendering (DIBR) significantly enhances the 3D visual experience compared to stereoscopic systems currently in use. DIBR techniques make it possible to generate additional viewpoints using 3D warping techniques to adjust the perceived depth of stereoscopic videos and provide for auto-stereoscopic displays that do not require glasses for viewing the 3D image.   The material includes a technical review and literature survey of components and complete systems, solutions for technical issues, and implementation of prototypes. The book is organized into four sections: System Overview, Content Generation, Data Compression and Transmission, and 3D V...

  13. Toward the light field display: autostereoscopic rendering via a cluster of projectors.

    Science.gov (United States)

    Yang, Ruigang; Huang, Xinyu; Li, Sifang; Jaynes, Christopher

    2008-01-01

    Ultimately, a display device should be capable of reproducing the visual effects observed in reality. In this paper we introduce an autostereoscopic display that uses a scalable array of digital light projectors and a projection screen augmented with microlenses to simulate a light field for a given three-dimensional scene. Physical objects emit or reflect light in all directions to create a light field that can be approximated by the light field display. The display can simultaneously provide many viewers from different viewpoints a stereoscopic effect without head tracking or special viewing glasses. This work focuses on two important technical problems related to the light field display; calibration and rendering. We present a solution to automatically calibrate the light field display using a camera and introduce two efficient algorithms to render the special multi-view images by exploiting their spatial coherence. The effectiveness of our approach is demonstrated with a four-projector prototype that can display dynamic imagery with full parallax.

  14. HAD Oral History Project

    Science.gov (United States)

    Holbrook, Jarita

    2014-01-01

    The Historical Astronomy Division is the recipient of an American Institute of Physics Neils Bohr Library Grant for Oral History. HAD has assembled a team of volunteers to conduct oral history interviews since May 2013. Each oral history interview varies in length between two and six hours. This presentation is an introduction to the HAD Oral History Project and the activities of the team during the first six months of the grant.

  15. Oral Steroids for Dermatitis.

    Science.gov (United States)

    Fisher, Andrew D; Clarke, Jesse; Williams, Timothy K

    2015-01-01

    Contact/allergic dermatitis is frequently treated inappropriately with lower-than-recommended doses or inadequate duration of treatment with oral and intramuscular glucocorticoids. This article highlights a case of dermatitis in a Ranger Assessment and Selection Program student who was improperly treated over 2 weeks with oral steroids after being bit by Cimex lectularius, commonly known as bed bugs. The article also highlights the pitfalls of improper oral steroid dosing and provides reasoning for longer-duration oral steroid treatment.

  16. Three-dimensional rendering of computer-generated holograms acquired from point-clouds on light field displays

    Science.gov (United States)

    Symeonidou, Athanasia; Blinder, David; Ceulemans, Beerend; Munteanu, Adrian; Schelkens, Peter

    2016-09-01

    Holograms, either optically acquired or simulated numerically from 3D datasets, such as point clouds, have special rendering requirements for display. Evaluating the quality of hologram generation techniques is not straightforward, since high-quality holographic display technologies are still immature, In this paper we present a framework for three-dimensional rendering of colour computer-generated holograms (CGHs) acquired from point-clouds, on high-end light field displays. This allows for the rendering of holographic content with horizontal parallax and wide viewing angle. We deploy prior work, namely a fast CGH method that inherently handles occlusion problems to acquire high quality colour holograms from point clouds. Our experiments showed that rendering holograms with the proposed framework provides 3D effect with depth disparity and horizontal-only with wide viewing angle. Therefore, it allows for the evaluation of CGH techniques regarding functional properties such as depth cues and efficient occlusion handling.

  17. [Oral cavity cancer: epidemiology and early diagnosis].

    Science.gov (United States)

    Ghantous, Y; Yaffi, V; Abu-Elnaaj, I

    2015-07-01

    Cancer of the oral cavity (Oral cancer) is the 11th most common malignancy in the world, despite the general global trend of a slight decrease in the incidence of oral cancer, tongue cancer incidence is increasing. About 90% of tumors are subtyped to oral Squamous cell carcinoma (OSCC). The incidence and mortality of this tumor shows variability according to the geographic location in which it is diagnosed, however in the last decade an increase was seen in the percentage of young patients, especially patients with tongue cancer. The overall prognosis of this cancer is roughly 55-65%, this is probably due to late diagnosis. Early diagnosis of oral cancer is the most important factor affecting the overall survival and prognosis, thus several diagnosis methods have been developed in the past few years. Still, the prognosis did not improve as expected. Oral cancer biomarkers in saliva is as easy body fluid, for noninvasive detection. Several researches identified several possible biomarkers, but none was specific. In our review, the incidence and mortality of oral tumors pose a main health problem in many aspects all around the world, as well as differences in behavior of these tumors. We witnessed more cases of anterior tongue cancers affecting mainly the young age patient group, a two decades younger than the normal risk group of oral cancer. Several countries in Europe showed a significant increase of oral cancer prevalence, such as Germany, especially in men. Similar behavior was also reported in the United States, which showed a change in the risk groups. Studies have reported an alarming lack of awareness about oral cancer, its symptoms and early diagnosis. These gaps in knowledge need to be addressed by further public education, possibly targeted at high-risk groups. With the knowledge of possible, specific, early biomarkers, primary detection could improve the prognosis tremendously. Research on the salivary biomarkers of the disease would help to develop

  18. Green Tea (Camellia Sinensis): Chemistry and Oral Health.

    Science.gov (United States)

    Khurshid, Zohaib; Zafar, Muhammad S; Zohaib, Sana; Najeeb, Shariq; Naseem, Mustafa

    2016-01-01

    Green tea is a widely consumed beverage worldwide. Numerous studies have suggested about the beneficial effects of green tea on oral conditions such as dental caries, periodontal diseases and halitosis. However, to date there have not been many review articles published that focus on beneficial effects of green tea on oral disease. The aim of this publication is to summarize the research conducted on the effects of green tea on oral cavity. Green tea might help reduce the bacterial activity in the oral cavity that in turn, can reduce the aforementioned oral afflictions. Furthermore, the antioxidant effect of the tea may reduce the chances of oral cancer. However, more clinical data is required to ascertain the possible benefits of green tea consumption on oral health.

  19. Green Tea (Camellia Sinensis): Chemistry and Oral Health

    Science.gov (United States)

    Khurshid, Zohaib; Zafar, Muhammad S.; Zohaib, Sana; Najeeb, Shariq; Naseem, Mustafa

    2016-01-01

    Green tea is a widely consumed beverage worldwide. Numerous studies have suggested about the beneficial effects of green tea on oral conditions such as dental caries, periodontal diseases and halitosis. However, to date there have not been many review articles published that focus on beneficial effects of green tea on oral disease. The aim of this publication is to summarize the research conducted on the effects of green tea on oral cavity. Green tea might help reduce the bacterial activity in the oral cavity that in turn, can reduce the aforementioned oral afflictions. Furthermore, the antioxidant effect of the tea may reduce the chances of oral cancer. However, more clinical data is required to ascertain the possible benefits of green tea consumption on oral health. PMID:27386001

  20. Oral Health and Aging

    Science.gov (United States)

    ... of this page please turn JavaScript on. Feature: Oral Health and Aging Oral Health and Aging Past Issues / Summer 2016 Table of ... years. He spoke with NIH MedlinePlus magazine about oral health issues common in older adults. What has been ...

  1. Oral Cancer Exam

    Medline Plus

    Full Text Available ... Dental and Craniofacial Research (NIDCR) Improving the Nation's Oral Health National Institutes of Health Español Staff Directory A– ... Index Search Text size: Website Contents NIDCR Home Oral Health Diseases and Conditions Gum Disease TMJ Disorders Oral ...

  2. Long-term thermophilic mono-digestion of rendering wastes and co-digestion with potato pulp

    Energy Technology Data Exchange (ETDEWEB)

    Bayr, S., E-mail: suvi.bayr@jyu.fi; Ojanperä, M.; Kaparaju, P.; Rintala, J.

    2014-10-15

    Highlights: • Rendering wastes’ mono-digestion and co-digestion with potato pulp were studied. • CSTR process with OLR of 1.5 kg VS/m{sup 3} d, HRT of 50 d was unstable in mono-digestion. • Free NH{sub 3} inhibited mono-digestion of rendering wastes. • CSTR process with OLR of 1.5 kg VS/m{sup 3} d, HRT of 50 d was stable in co-digestion. • Co-digestion increased methane yield somewhat compared to mono-digestion. - Abstract: In this study, mono-digestion of rendering wastes and co-digestion of rendering wastes with potato pulp were studied for the first time in continuous stirred tank reactor (CSTR) experiments at 55 °C. Rendering wastes have high protein and lipid contents and are considered good substrates for methane production. However, accumulation of digestion intermediate products viz., volatile fatty acids (VFAs), long chain fatty acids (LCFAs) and ammonia nitrogen (NH{sub 4}-N and/or free NH{sub 3}) can cause process imbalance during the digestion. Mono-digestion of rendering wastes at an organic loading rate (OLR) of 1.5 kg volatile solids (VS)/m{sup 3} d and hydraulic retention time (HRT) of 50 d was unstable and resulted in methane yields of 450 dm{sup 3}/kg VS{sub fed}. On the other hand, co-digestion of rendering wastes with potato pulp (60% wet weight, WW) at the same OLR and HRT improved the process stability and increased methane yields (500–680 dm{sup 3}/kg VS{sub fed}). Thus, it can be concluded that co-digestion of rendering wastes with potato pulp could improve the process stability and methane yields from these difficult to treat industrial waste materials.

  3. Public health aspects of tobacco control revisited

    NARCIS (Netherlands)

    Gallagher, Jennifer E.; Alajbeg, Ivan; Buechler, Silvia; Carrassi, Antonio; Hovius, Marjolijn; Jacobs, Annelies; Jenner, Maryan; Kinnunen, Taru; Ulbricht, Sabina; Zoitopoulos, Liana

    2010-01-01

    The tobacco epidemic presents a major public health challenge, globally, and within Europe. The aim of the Public Health Work Stream at the 2nd European Workshop on Tobacco Use Prevention and Cessation for Oral Health Professionals was to review the public health aspects of tobacco control and make

  4. Public health aspects of tobacco control revisited

    NARCIS (Netherlands)

    Gallagher, Jennifer E.; Alajbeg, Ivan; Buechler, Silvia; Carrassi, Antonio; Hovius, Marjolijn; Jacobs, Annelies; Jenner, Maryan; Kinnunen, Taru; Ulbricht, Sabina; Zoitopoulos, Liana

    2010-01-01

    The tobacco epidemic presents a major public health challenge, globally, and within Europe. The aim of the Public Health Work Stream at the 2nd European Workshop on Tobacco Use Prevention and Cessation for Oral Health Professionals was to review the public health aspects of tobacco control and make

  5. Public health aspects of tobacco control revisited

    NARCIS (Netherlands)

    Gallagher, Jennifer E.; Alajbeg, Ivan; Buechler, Silvia; Carrassi, Antonio; Hovius, Marjolijn; Jacobs, Annelies; Jenner, Maryan; Kinnunen, Taru; Ulbricht, Sabina; Zoitopoulos, Liana

    The tobacco epidemic presents a major public health challenge, globally, and within Europe. The aim of the Public Health Work Stream at the 2nd European Workshop on Tobacco Use Prevention and Cessation for Oral Health Professionals was to review the public health aspects of tobacco control and make

  6. Public health aspects of tobacco control revisited.

    NARCIS (Netherlands)

    Gallagher, J.E.; Alajbeg, I.; Buchler, S.; Carrassi, A.; Hovius, M.; Jacobs, A.; Jenner, M.; Kinnunen, T.; Ulbricht, S.; Zoitopoulos, L.

    2010-01-01

    The tobacco epidemic presents a major public health challenge, globally, and within Europe. The aim of the Public Health Work Stream at the 2nd European Workshop on Tobacco Use Prevention and Cessation for Oral Health Professionals was to review the public health aspects of tobacco control and make

  7. Oral Health in Rural Communities

    Science.gov (United States)

    ... Guide Rural Health Topics & States Topics View more Oral Health in Rural Communities Adequate access to oral healthcare ... about oral health programs in my area? What oral health disparities are present in rural America? According to ...

  8. Risk Factor Analysis for Oral Precancer among Slum Dwellers in ...

    African Journals Online (AJOL)

    Rajasthan Dental College, Jaipur, Rajasthan, 1Dental Wing, All India Institute of Medical Sciences (AIIMS), Bhopal,. 4Department of Public ... Keywords: Oral cancer, Risk factor analysis, Slum dwellers. Access this .... hygiene aid used in India.

  9. Public Values

    DEFF Research Database (Denmark)

    Beck Jørgensen, Torben; Rutgers, Mark R.

    2015-01-01

    administration is approached in terms of processes guided or restricted by public values and as public value creating: public management and public policy-making are both concerned with establishing, following and realizing public values. To study public values a broad perspective is needed. The article suggest......This article provides the introduction to a symposium on contemporary public values research. It is argued that the contribution to this symposium represent a Public Values Perspective, distinct from other specific lines of research that also use public value as a core concept. Public...... a research agenda for this encompasing kind of public values research. Finally the contributions to the symposium are introduced....

  10. Infant oral health and oral habits.

    Science.gov (United States)

    Nowak, A J; Warren, J J

    2000-10-01

    Many oral diseases and conditions, including dental caries (cavities) and malocclusions, have their origins early in life. Prudent anticipatory guidance by the medical and dental professions can help prevent many of the more common oral health problems. This article provides information on the rationale for early dental examination and instructions for pediatric and family practitioners in scheduling and conducting an early oral intervention appointment. In addition, feeding practices, non-nutritive sucking, mouth breathing, and bruxing are discussed, including their effects on orofacial growth and development.

  11. Oral steroid contraception.

    Science.gov (United States)

    Sech, Laura A; Mishell, Daniel R

    2015-11-01

    Oral steroid contraception is a popular method of family planning worldwide. Over the past several decades, this method of contraception has changed significantly by decreasing the estrogen dose, changing the progestin component, and reducing the hormone free interval. Despite the popularity of oral steroid contraception, there has been much criticism regarding the associated risks of venous thromboembolism and stroke. Despite these established, yet uncommon risks, oral steroid contraception has many important health benefits. This review highlights the available formulations of oral contraceptives along with their evidence-based associated risks and benefits. Highlights regarding future directions for development of novel oral contraceptives are also addressed.

  12. Improving Oral Performance through Interactions Flashcards

    Science.gov (United States)

    Urquijo, Jasson

    2012-01-01

    This paper describes an action research project that addressed the issue of low oral performance in English among third grade learners at a public girls' school in Bogota, Colombia. The issue was identified via content analysis of ten field logs compiled over the third and fourth quarter of the second semester, 2010. To address the problem of…

  13. A Fast Ray-Tracing Using Bounding Spheres and Frustum Rays for Dynamic Scene Rendering

    Science.gov (United States)

    Suzuki, Ken-Ichi; Kaeriyama, Yoshiyuki; Komatsu, Kazuhiko; Egawa, Ryusuke; Ohba, Nobuyuki; Kobayashi, Hiroaki

    Ray tracing is one of the most popular techniques for generating photo-realistic images. Extensive research and development work has made interactive static scene rendering realistic. This paper deals with interactive dynamic scene rendering in which not only the eye point but also the objects in the scene change their 3D locations every frame. In order to realize interactive dynamic scene rendering, RTRPS (Ray Tracing based on Ray Plane and Bounding Sphere), which utilizes the coherency in rays, objects, and grouped-rays, is introduced. RTRPS uses bounding spheres as the spatial data structure which utilizes the coherency in objects. By using bounding spheres, RTRPS can ignore the rotation of moving objects within a sphere, and shorten the update time between frames. RTRPS utilizes the coherency in rays by merging rays into a ray-plane, assuming that the secondary rays and shadow rays are shot through an aligned grid. Since a pair of ray-planes shares an original ray, the intersection for the ray can be completed using the coherency in the ray-planes. Because of the three kinds of coherency, RTRPS can significantly reduce the number of intersection tests for ray tracing. Further acceleration techniques for ray-plane-sphere and ray-triangle intersection are also presented. A parallel projection technique converts a 3D vector inner product operation into a 2D operation and reduces the number of floating point operations. Techniques based on frustum culling and binary-tree structured ray-planes optimize the order of intersection tests between ray-planes and a sphere, resulting in 50% to 90% reduction of intersection tests. Two ray-triangle intersection techniques are also introduced, which are effective when a large number of rays are packed into a ray-plane. Our performance evaluations indicate that RTRPS gives 13 to 392 times speed up in comparison with a ray tracing algorithm without organized rays and spheres. We found out that RTRPS also provides competitive

  14. Oral biopsy: Oral pathologist′s perspective

    Directory of Open Access Journals (Sweden)

    K L Kumaraswamy

    2012-01-01

    Full Text Available Many oral lesions may need to be diagnosed by removing a sample of tissue from the oral cavity. Biopsy is widely used in the medical field, but the practice is not quite widespread in dental practice. As oral pathologists, we have found many artifacts in the tissue specimen because of poor biopsy technique or handling, which has led to diagnostic pitfalls and misery to both the patient and the clinician. This article aims at alerting the clinicians about the clinical faults arising preoperatively, intraoperatively and postoperatively while dealing with oral biopsy that may affect the histological assessment of the tissue and, therefore, the diagnosis. It also reviews the different techniques, precautions and special considerations necessary for specific lesions.

  15. The medical care rendering to the infective patients in Afghanistan (1979 – 1989

    Directory of Open Access Journals (Sweden)

    K. S. Ivanov

    2009-01-01

    Full Text Available This article presents the author’s own experience of medical care rendered to the infective patients of the limited contingent of the Soviet troops in Afghanistan is generalized (1979 – 1989. According to factual evidence it is clear that during different periods of time, the percentage of the infective patients averages till 45,2 up to 67, 8% from the general number of the sanitary detachments. The most actual illnesses were typhoid fever, amebiasis, viral hepatitis, malaria and mixt-infections. In the article also covered the main steps of the formation and organization of the hospital base for the infective patients. Special attention is paid to the emergency aid implementation during so-called pre-admission period, realization of the medical grading and prevention of the intensive therapy in the hospitals.  

  16. GPU-Based Volume Rendering of Noisy Multi-Spectral Astronomical Data

    CERN Document Server

    Hassan, Amr H; Barnes, David G

    2010-01-01

    Traditional analysis techniques may not be sufficient for astronomers to make the best use of the data sets that current and future instruments, such as the Square Kilometre Array and its Pathfinders, will produce. By utilizing the incredible pattern-recognition ability of the human mind, scientific visualization provides an excellent opportunity for astronomers to gain valuable new insight and understanding of their data, particularly when used interactively in 3D. The goal of our work is to establish the feasibility of a real-time 3D monitoring system for data going into the Australian SKA Pathfinder archive. Based on CUDA, an increasingly popular development tool, our work utilizes the massively parallel architecture of modern graphics processing units (GPUs) to provide astronomers with an interactive 3D volume rendering for multi-spectral data sets. Unlike other approaches, we are targeting real time interactive visualization of datasets larger than GPU memory while giving special attention to data with l...

  17. Rendering justice in witch trials: the case of the val de Lièpvre.

    Science.gov (United States)

    Simon, Maryse

    2011-01-01

    The borderland of the val de Lièpvre, with lands in Alsace and in the Duchy of Lorraine, and divided by religion and language, offers a rich collection of sources for the history of witchcraft persecution. The territory sharply reveals what was undoubtedly characteristic of witchcraft trials more widely. The crime of witchcraft was considered abominable before the Christian community and God, and its prosecution justified abandoning many of the safeguards and constraints in legal procedure, whether restrictions on the use of torture, the reliance on dubious testimony or even denial of advocacy to the witches. The action of the judges was nonetheless, as they understood it, the rendering of true justice, by punishing the culprits with a harshness that would expiate their crimes before the community and preserve them from damnation in the face of God's judgment.

  18. A Case Study of a Hybrid Parallel 3D Surface Rendering Graphics Architecture

    DEFF Research Database (Denmark)

    Holten-Lund, Hans Erik; Madsen, Jan; Pedersen, Steen

    1997-01-01

    This paper presents a case study in the design strategy used inbuilding a graphics computer, for drawing very complex 3Dgeometric surfaces. The goal is to build a PC based computer systemcapable of handling surfaces built from about 2 million triangles, andto be able to render a perspective view...... of these on a computer displayat interactive frame rates, i.e. processing around 50 milliontriangles per second. The paper presents a hardware/softwarearchitecture called HPGA (Hybrid Parallel Graphics Architecture) whichis likely to be able to carry out this task. The case study focuses ontechniques to increase...... the clock frequency as well as the parallelismof the system. This paper focuses on the back-end graphics pipeline,which is responsible for rasterizing triangles.%with a practically linear increase in performance. A pure software implementation of the proposed architecture iscurrently able to process 300...

  19. Optimized Watermarking for Light Field Rendering based Free-View TV

    DEFF Research Database (Denmark)

    Apostolidis, Evlampios; Kounalakis, Tsampikos; Manifavas, Charalampos

    2013-01-01

    In Free-View Television the viewers select freely the viewing position and angle of the transmitted multiview video. It is apparent that copyright and copy protection problems exist, since a video of this arbitrarily selected view can be recorded and then misused. In this context, the watermark...... and the efficiency of the watermarks and their corresponding Mathematical Distributions, in terms of “robustness” and “successful detection” from new constructed views of FTV, using Light Field Rendering (LFR) techniques. We studied the values which characterize the watermark’s performance and the parameters...... introduced by the watermark’s insertion-extraction scheme. Therefore, we ended up to the best five Mathematical Distributions, and we concluded that the watermark’s robustness in FTV case does not depend only on the FTV image’s characteristics, but it also relies on the characteristics of the Mathematical...

  20. Rendering graphene supports hydrophilic with non-covalent aromatic functionalization for transmission electron microscopy

    Science.gov (United States)

    Pantelic, Radosav S.; Fu, Wangyang; Schoenenberger, Christian; Stahlberg, Henning

    2014-03-01

    Amorphous carbon films have been routinely used to enhance the preparation of frozen-hydrated samples for transmission electron microscopy (TEM), either in retaining protein concentration, providing mechanical stability or dissipating sample charge. However, strong background signal from the amorphous carbon support obstructs that of the sample, and the insulating properties of thin amorphous carbon films preclude any efficiency in dispersing charge. Graphene addresses the limitations of amorphous carbon. Graphene is a crystalline material with virtually no phase or amplitude contrast and unparalleled, high electrical carrier mobility. However, the hydrophobic properties of graphene have prevented its routine application in Cryo-TEM. This Letter reports a method for rendering graphene TEM supports hydrophilic—a convenient approach maintaining graphene's structural and electrical properties based on non-covalent, aromatic functionalization.