Incentive Policy Options for Product Remanufacturing: Subsidizing Donations or Resales?

Science.gov (United States)

Zhu, Xiaodong; Wang, Yue; Li, Bangyi

2017-01-01

Remanufactured products offer better environmental benefits, and governments encourage manufacturers to remanufacture through various subsidy policies. This practice has shown that, in addition to product sales, remanufactured product can also achieve its value through social donation. Based on the remanufactured product value realization approaches, governments provide two kinds of incentive policies, which are remanufactured product sales subsidies and remanufactured product donation subsidies. This paper constructs a two-stage Stackelberg game model including a government and a manufacturer under two different policies, which can be solved by backward induction. By comparing the optimal decision of the two policies, our results show that, compared with the remanufacturing sales subsidy, donation subsidy weakens the cannibalization of remanufactured products for new products and increases the quantity of new products. It reduces the sales quantity of remanufactured products, but increases their total quantity. Under certain conditions of low subsidy, the manufacturer adopting sales subsidy provides better economic and environmental benefits. Under certain conditions of high subsidy, the manufacturer adopting donation subsidy offers better economic and environmental benefits. When untreated product environmental impact is large enough, donation subsidy policy has a better social welfare. Otherwise, the choice of social welfare of these two different policies depends on the social impact of remanufactured product donated. PMID:29194411

Incentive Policy Options for Product Remanufacturing: Subsidizing Donations or Resales?

Science.gov (United States)

Zhu, Xiaodong; Wang, Zhe; Wang, Yue; Li, Bangyi

2017-12-01

Remanufactured products offer better environmental benefits, and governments encourage manufacturers to remanufacture through various subsidy policies. This practice has shown that, in addition to product sales, remanufactured product can also achieve its value through social donation. Based on the remanufactured product value realization approaches, governments provide two kinds of incentive policies, which are remanufactured product sales subsidies and remanufactured product donation subsidies. This paper constructs a two-stage Stackelberg game model including a government and a manufacturer under two different policies, which can be solved by backward induction. By comparing the optimal decision of the two policies, our results show that, compared with the remanufacturing sales subsidy, donation subsidy weakens the cannibalization of remanufactured products for new products and increases the quantity of new products. It reduces the sales quantity of remanufactured products, but increases their total quantity. Under certain conditions of low subsidy, the manufacturer adopting sales subsidy provides better economic and environmental benefits. Under certain conditions of high subsidy, the manufacturer adopting donation subsidy offers better economic and environmental benefits. When untreated product environmental impact is large enough, donation subsidy policy has a better social welfare. Otherwise, the choice of social welfare of these two different policies depends on the social impact of remanufactured product donated.

Optimal Remanufacturing Certification Contracts in the Electrical and Electronic Industry

Directory of Open Access Journals (Sweden)

Huihui Liu

2017-03-01

Full Text Available While remanufacturing is highly encouraged worldwide, some original equipment manufacturers (OEMs in the electrical and electronics industry are still not willing to embrace remanufacturing, for fear of expensive investment or the cannibalization of existing products. Meanwhile, third-party remanufacturers’ (TPRs remanufactured products are developing quickly. Due to quality reasons, consumers usually have a higher preference for OEM-certified remanufactured products than uncertified ones. As such, remanufacturing certification has become a strategy that OEMs can use to benefit from product remanufacturing. Our paper focuses on the remanufacturing certification contract between an OEM and a TPR. Once certified, the TPR makes payments to the OEM. These payment terms will affect their enthusiasm for participating in remanufacturing certification. By establishing game models among an OEM, a certified TPR, and an uncertified TPR, our paper explores three certification contracts, namely, the lump-sum payment, profit-sharing payment, and piece-rate payment. We identify the conditions for the OEM and certified TPR to reach a win-win outcome. Our results show that when TPRs have a high profit margin and there is no significant difference in consumers’ preferences between certified and non-certified remanufacturing channels, the profit-sharing payment contract yields the highest profit; otherwise, the piece-rate payment contract is best for the OEM.

Optimizing two-dimensional renewable warranty policies for sensor embedded remanufactured products

Directory of Open Access Journals (Sweden)

Ammar Alqahtani

2017-05-01

Full Text Available Purpose: Remanufactured products, in addition to being environment friendly, are popular with consumers because they can offer the latest technology with lower prices in comparison to brand new products. However, some consumers are hesitant to buy remanufactured products because they are skeptical about the quality of the remanufactured product and thus are unsure of the extent to which the product will render services when compared to a new product. A strategy that remanufacturers may employ to entice customers is to offer warranties on remanufactured products. To that end, this paper studies and scrutinizes the impact of offering renewing warranties on remanufactured products. Specifically, the paper suggests a methodology which simultaneously minimizes the cost incurred by the remanufacturers and maximizes the confidence of the consumers towards buying remanufacturing products. Design/methodology/approach: This study uses discrete-event simulation to optimize the implementation of a two-dimensional renewing warranty policy for remanufactured products. The implementation is illustrated using a specific product recovery system called the Advanced Remanufacturing-To-Order (ARTO system. The experiments used in the study were designed using Taguchi’s Orthogonal Arrays to represent the entire domain of the recovery system so as to observe the system behavior under various experimental conditions. In order to determine the optimum strategy offered by the remanufacturer, various warranty and preventive maintenance scenarios were analyzed using pairwise t-tests along with one-way analysis of variance (ANOVA and Tukey pairwise comparisons tests for every scenario. Findings: The proposed methodology is able to simultaneously minimize the cost incurred by the remanufacturer, optimize the warranty price and period, and optimize the preventive maintenance strategy resulting in increased consumer confidence. Originality/value: This is the first study that

Optimizing two-dimensional renewable warranty policies for sensor embedded remanufactured products

International Nuclear Information System (INIS)

Alqahtani, Ammar; Gupta, Surendra M.

2017-01-01

Remanufactured products, in addition to being environment friendly, are popular with consumers because they can offer the latest technology with lower prices in comparison to brand new products. However, some consumers are hesitant to buy remanufactured products because they are skeptical about the quality of the remanufactured product and thus are unsure of the extent to which the product will render services when compared to a new product. A strategy that remanufacturers may employ to entice customers is to offer warranties on remanufactured products. To that end, this paper studies and scrutinizes the impact of offering renewing warranties on remanufactured products. Specifically, the paper suggests a methodology which simultaneously minimizes the cost incurred by the remanufacturers and maximizes the confidence of the consumers towards buying remanufacturing products. Design/methodology/approach: This study uses discrete-event simulation to optimize the implementation of a two-dimensional renewing warranty policy for remanufactured products. The implementation is illustrated using a specific product recovery system called the Advanced Remanufacturing-To-Order (ARTO) system. The experiments used in the study were designed using Taguchi’s Orthogonal Arrays to represent the entire domain of the recovery system so as to observe the system behavior under various experimental conditions. In order to determine the optimum strategy offered by the remanufacturer, various warranty and preventive maintenance scenarios were analyzed using pairwise t-tests along with one-way analysis of variance (ANOVA) and Tukey pairwise comparisons tests for every scenario. Findings: The proposed methodology is able to simultaneously minimize the cost incurred by the remanufacturer, optimize the warranty price and period, and optimize the preventive maintenance strategy resulting in increased consumer confidence. Originality/value: This is the first study that evaluates in a

Optimizing two-dimensional renewable warranty policies for sensor embedded remanufactured products

Energy Technology Data Exchange (ETDEWEB)

Alqahtani, Ammar; Gupta, Surendra M.

2017-07-01

Remanufactured products, in addition to being environment friendly, are popular with consumers because they can offer the latest technology with lower prices in comparison to brand new products. However, some consumers are hesitant to buy remanufactured products because they are skeptical about the quality of the remanufactured product and thus are unsure of the extent to which the product will render services when compared to a new product. A strategy that remanufacturers may employ to entice customers is to offer warranties on remanufactured products. To that end, this paper studies and scrutinizes the impact of offering renewing warranties on remanufactured products. Specifically, the paper suggests a methodology which simultaneously minimizes the cost incurred by the remanufacturers and maximizes the confidence of the consumers towards buying remanufacturing products. Design/methodology/approach: This study uses discrete-event simulation to optimize the implementation of a two-dimensional renewing warranty policy for remanufactured products. The implementation is illustrated using a specific product recovery system called the Advanced Remanufacturing-To-Order (ARTO) system. The experiments used in the study were designed using Taguchi’s Orthogonal Arrays to represent the entire domain of the recovery system so as to observe the system behavior under various experimental conditions. In order to determine the optimum strategy offered by the remanufacturer, various warranty and preventive maintenance scenarios were analyzed using pairwise t-tests along with one-way analysis of variance (ANOVA) and Tukey pairwise comparisons tests for every scenario. Findings: The proposed methodology is able to simultaneously minimize the cost incurred by the remanufacturer, optimize the warranty price and period, and optimize the preventive maintenance strategy resulting in increased consumer confidence. Originality/value: This is the first study that evaluates in a

Post-vehicle-application lithium-ion battery remanufacturing, repurposing and recycling capacity: Modeling and analysis

Directory of Open Access Journals (Sweden)

Charles Robert Standridge

2015-05-01

recycling is relatively constant regardless of the percent of post-vehicle-application batteries that are remanufactured.  The sum of the capacity for remanufacturing and recycling is relatively constant as well.  The need for new battery production capacity is reduced significantly (> 10% for remanufacturing percentages of 55% and above. Research limitations/implications: There is a high degree of uncertainty associated with any forecast concerning post-vehicle-application lithium-ion batteries due to a lack of experience with their remanufacturing, repurposing, and recycling. Practical implications: Electrification of vehicles appears to be the only technically feasible approach to meeting government regulations concerning mileage and emissions (Center for Climate and Energy Solutions 2013.  The planning in the present for the remanufacturing, repurposing, and recycling of the lithium-ion batteries used in electrification of vehicles is necessary.  Capacity estimation is one important component of such planning. Social implications: The electrification of vehicles versus the use of fossil fuels is consistent with the guiding principles of sustainability in helping to meet current needs without compromising the needs and resources of future generations.  Reusing entire lithium-ion batteries or recycling the materials of which they are composed further reinforces the sustainability of vehicle electrification. Originality/value: Estimates of recycling capacity needed in 2030, about 2.69M kWh, change little with the percent of post-vehicle-application batteries that are remanufactured.  The need for significant recycling capacity appears between 2022 and 2024, increasing steadily thereafter.  Similarly, the sum of remanufacturing and repurposing capacity is relatively constant indicating the need for flexible facilities that can do either task.  In addition by 2030, up to approximately 25% of new battery production could be replaced by remanufactured batteries.

Optimal Acquisition and Inventory Control for a Remanufacturing System

Directory of Open Access Journals (Sweden)

Zhigang Jiang

2013-01-01

Full Text Available Optimal acquisition and inventory control can often make the difference between successful and unsuccessful remanufacturing. However, there is a greater degree of uncertainty and complexity in a remanufacturing system, which leads to a critical need for planning and control models designed to deal with this added uncertainty and complexity. In this paper, a method for optimal acquisition and inventory control of a remanufacturing system is presented. The method considers three inventories, one for returned item and the other for serviceable and recoverable items. Taking the holding cost for returns, recoverable and remanufactured products, remanufacturing cost, disposal cost, and the loss caused by backlog into account, the optimal inventory control model is established to minimize the total costs. Finally, a numerical example is provided to illustrate the proposed methods.

Price and Service Competition between New and Remanufactured Products

Directory of Open Access Journals (Sweden)

Bin Wang

2015-01-01

Full Text Available This paper sets two manufacturers on the market. One is traditional manufacturer, which produces new products, and the other remanufactures by recycling used products. Two manufacturers sell products to customers through one retailer and also provide product-related services. Three participators decide prices and service levels independently. We discuss the optimal decision of prices, service levels, demands, and profits in three scenarios: Manufacturers Stackelberg, Retailer Stackelberg, and Nash Equilibrium. We also study the influence of customer acceptance of remanufactured product (θ on participators’ decisions. With the increase of θ, new product profit reduces; remanufactured product profit increases at the beginning and then decreases. Retailer profit grows steadily. In Manufacturers Stackelberg, new and remanufactured products can get the maximum profits, and retailer only has the minimum profit. In Retailer Stackelberg, retailer can get the maximum profit; new product only has the minimum profit and remanufactured product has the medium gain. In Nash Equilibrium, new product and retailer have the medium gains, and remanufactured product has the minimum profit.

Maximizing remanufacturing profit using product acquisition management

NARCIS (Netherlands)

V.D.R. Guide Jr (Daniel); R.H. Teunter (Ruud); L.N. van Wassenhove (Luk)

2001-01-01

textabstractThe profitability of remanufacturing depends on the quantity and quality of product returns and on the demand for remanufactured products. The quantity and quality of product returns can be influenced by varying quality dependent acquisition prices, i.e., by using product acquisition

Decisions on Remanufacturing with WTP Disparity and Recycling Competition under Government Subsidies

Directory of Open Access Journals (Sweden)

Tong Shu

2017-08-01

Full Text Available Enterprises have assigned increasing importance to remanufacturing, and meanwhile, the competitiveness of remanufacturing has also become established. In this article, game theory is exploited and government subsidies for remanufacturing, consumer willingness to pay and recycling competition are considered, with a focus on a supply chain consisting of one local manufacturer and one nonlocal remanufacturer. This study attempts to investigate how nonlocal remanufacturers and local manufacturers determine whether they recycle used products and engage in remanufacturing when these factors are considered, in the hope that the results can be constructive in terms of policies and management related to enterprises and governments. As such, four situations are considered and the corresponding models are built to derive the optimal production of each enterprise in the four different situations. Numerical results under the four situations are furthercompared. The results show that consumer acceptance of remanufactured products, irrespective of whether there is competition in production and recycling of remanufactured products and whetherthe government provides subsidy for remanufacturing directly affects each enterprise, remanufacturing and the profits of the overall supply chains. Based on these factors, enterprises should adjust strategies and choose to compete or stop competing or monopolize the market. The government should define attitudes towards the market competition and supervise the changes of market competitiveness based onmarket competition and consumer acceptance of remanufactured products. This study can provide some constructive guidance for some potential nonlocal enterprises engaged in remanufacturing, and at the same time shed some light for desirable direction in some further research onremanufacturing in theory and practice.

Inventory strategies for systems with fast remanufacturing

NARCIS (Netherlands)

R.H. Teunter (Ruud); E.A. van der Laan (Erwin); D. Vlachos (Dimitrios)

2002-01-01

textabstractWe describe hybrid manufacturing/remanufacturing systems with a long lead time for manufacturing and a short lead time for remanufacturing. We review the classes of inventory strategies for hybrid systems in the literature. These are all based on equal lead times. For systems with slow

Cooperation or Competition? Channel Choice for a Remanufacturing Fashion Supply Chain with Government Subsidy

Directory of Open Access Journals (Sweden)

Kangzhou Wang

2014-10-01

Full Text Available In this paper, we address the problem of choosing an appropriate channel for the marketing channel structure of remanufactured fashion products. To be specific, we consider a remanufacturer who has two options for selling the products: (1 provide the remanufactured products to a manufacturer, then the manufacturer sells both new products and the remanufactured products to customers, and (2 sell the remanufactured products directly to customers. Because of the relatively low acceptance of remanufactured products and environment consciousness of customers in developing countries like China, we model the two scenarios as decentralized remanufacturing supply chains, with the manufacturer being the Stackelberg leader and the government offering subsidy to the remanufacturer to incentivize remanufacturing activities. We find that the subsidy can incentivize remanufacturing activity regardless of the remanufacturer’s channel choice. A “too high” or “too low” subsidy makes the remanufacturer compete with the manufacturer, and an intermediate subsidy results in cooperation between the two members of the remanufacturing supply chain. Meanwhile, if the customers’ acceptance for remanufactured products is higher, the remanufacturer will be more likely to compete with the manufacturer. However, the remanufacturer’s optimal channel choice may be inefficient in the sense of social welfare and environmental protection.

Energy and labor cost of gasoline engine remanufacturing

Energy Technology Data Exchange (ETDEWEB)

Venta, E.R.; Wolsky, A.M.

1978-09-01

This report presents a detailed estimate of the labor and energy, by fuel type, required by the U.S. economy to remanufacture gasoline-fueled automobile and truck engines. Th estimate was obtained by combining data provided by several remanufacturers with the results of input--output analysis. A rough estimate of the labor and energy required to manufacture new engines is also given. These estimates suggest that remanufactured engines require 50% of the energy and 67% of the labor that new engines require.

Application of fuzzy analytic network process for barrier evaluation in automotive parts remanufacturing towards cleaner production

DEFF Research Database (Denmark)

Govindan, Kannan; Shankar, Madan; Kannan, Devika

2016-01-01

to hidden facts. Many researchers have explored such hidden facts in auto parts remanufacturing in developing nations and their emerging economies. However, there is a huge gap in the state-of-the-art remanufacturing practices in India, despite India's strong advancements in the automobile industry. In fact......, India's automobile industry is rapidly approaching that of China's in recent years. Although some studies are available regarding remanufacturing implementation, current research has generally failed to offer a deep analysis of the factors and barriers that exist as hurdles to such implementation....... Consequently, this paper attempts to investigate the essential barrier to auto parts remanufacturing in an Indian scenario, and we also address vital interrelationships and interdependencies. To achieve the aim of the study, a model framework is proposed and applied to an Indian case industry. The data...

Research on High-efficient Remanufacturing Technologies and Application of Electric Motor

Science.gov (United States)

Liu, Ren; Zhao, Yuejin; Yang, Xu; Wang, Gen

2017-09-01

The energy conservation of electric motor system is the key of industrial energy conservation. With the implementation and acceleration of electric motor energy efficiency improvement plan, more and more electric motors are knocked out. High-efficient remanufacturing of electric motor refers to improving the efficiency of electric motor and recycling the resources by replacing the winding, iron core and other components of electric motor on the basis of the low-efficient/outdated electric motors, which conforms to China’s policy of circular economy and resource recovery. The remanufacturing of electric motor not only maximizes the use of resources, but also reduces the energy consumption generated by reprocessing of cast iron, silicon steel sheet and other materials in dismantling of electric motor. However, structures and iron core materials used in design and manufacture of electric motors are different, and the degrees of wear of electric motors are also different under different operating conditions, which further result in diversified design schemes, increased remanufacturing cost and reduced remanufacturing efficiency. This paper analyzes the key process technologies for remanufacturing of electric motors are researched by analyzing the remanufacturing technologies of electric motors, and presents the feasibility to replace the cast-aluminum rotor with cast-copper rotor in high-efficient remanufacturing process of electric motor.

Managing new and differentiated remanufactured products

OpenAIRE

Ferrer, Geraldo; Swaminathan, Jayashankar M.

2010-01-01

The article of record as published may be located at http://dx.doi.org/10.1016/j.ejor.2009.08.007 We study a firm that makes new products in the first period and uses returned cores to make remanufactured products (along with new products) in future periods. The remanufactured product is differentiated from the new product, so the firm needs to choose differentiated prices. We analyze the monopoly environment in two-period, multi-period (three, four and five) and infinite planning...

Integrating dynamic acquisition pricing and remanufacturing decisions under random price-sensitive returns

DEFF Research Database (Denmark)

Sun, X.; Li, Y.; Govindan, Kannan

2013-01-01

As uncertainties increase in both the acquisition of used products and the demand of remanufactured products, balancing supply and demand has become more important for a remanufacturing firm. Therefore, the remanufacturing firm needs to combine acquisition management with remanufacturing planning...... level and acquisition price of each period, which holds a lower computational complexity. Finally, numerical examples are provided to show the effectiveness of the algorithm and to conduct managerial insights of main parameters....

Research on the energy and ecological efficiency of mechanical equipment remanufacturing systems

Science.gov (United States)

Shi, Junli; Cheng, Jinshi; Ma, Qinyi; Wang, Yajun

2017-08-01

According to the characteristics of mechanical equipment remanufacturing system, the dynamic performance of energy consumption and emission is explored, the equipment energy efficiency and emission analysis model is established firstly, and then energy and ecological efficiency analysis method of the remanufacturing system is put forward, at last, the energy and ecological efficiency of WD615.87 automotive diesel engine remanufacturing system as an example is analyzed, the way of energy efficiency improvementnt and environmental friendly mechanism of remanufacturing process is put forward.

Optimizing Two-Dimensional Renewable Warranty Policies for Sensor Embedded Remanufactured Products

OpenAIRE

Alqahtani, Ammar; Gupta, Surendra M.

2017-01-01

Purpose: Remanufactured products, in addition to being environment friendly, are popular with consumers because they can offer the latest technology with lower prices in comparison to brand new products. However, some consumers are hesitant to buy remanufactured products because they are skeptical about the quality of the remanufactured product and thus are unsure of the extent to which the product will render services when compared to a new product. A strategy that remanufactu...

40 CFR 1042.836 - Marine certification of locomotive remanufacturing systems.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Marine certification of locomotive remanufacturing systems. 1042.836 Section 1042.836 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... ENGINES AND VESSELS Special Provisions for Remanufactured Marine Engines § 1042.836 Marine certification...

Identifying Critical Factors in the Eco-Efficiency of Remanufacturing Based on the Fuzzy DEMATEL Method

Directory of Open Access Journals (Sweden)

Qianwang Deng

2015-11-01

Full Text Available Remanufacturing can bring considerable economic and environmental benefits such as cost saving, conservation of energy and resources, and reduction of emissions. With the increasing awareness of sustainable manufacturing, remanufacturing gradually becomes the research priority. Most studies concentrate on the analysis of influencing factors, or the evaluation of the economic and environmental performance in remanufacturing, while little effort has been devoted to investigating the critical factors influencing the eco-efficiency of remanufacturing. Considering the current development of the remanufacturing industry in China, this paper proposes a set of factors influencing the eco-efficiency of remanufacturing and then utilizes a fuzzy Decision Making Trial and Evaluation Laboratory (DEMATEL method to establish relation matrixes reflecting the interdependent relationships among these factors. Finally, the contributions of each factor to eco-efficiency and mutual influence values among them are obtained, and critical factors in eco-efficiency of remanufacturing are identified. The results of the present work can provide theoretical supports for the government to make appropriate policies to improve the eco-efficiency of remanufacturing.

Optimal Acquisition and Production Policy for End-of-Life Engineering Machinery Recovering in a Joint Manufacturing/Remanufacturing System under Uncertainties in Procurement and Demand

Directory of Open Access Journals (Sweden)

Haolan Liao

2017-02-01

Full Text Available The intensive shortage of natural resources and the inchoate phase of automobile remanufacturing in a closed-loop supply chain (CLSC are driving people to take cyclic manufacturing seriously. Aiming at maximizing resource utilization and produce profits, we apply an optimizing mathematical analysis to the modeling of automobile engine remanufacturing in a joint manufacturing system, in which the quantity and quality of procurement, and the demand of the market, are both uncertain. The manufacturer can either produce new products with raw materials or remanufacture the returned product taken back from customers; the raw materials are bought from two suppliers with certain probabilities of disruption in the supply. The returned products are classified into different quality levels according to the testing results after sorting, by considering the remanufacture-up-to strategy we obtained the optimal remanufacturing ratio, then the manufacturing quantity and corresponding maximized total profit of this joint system are determined. We also investigated a real-life case of auto engine remanufacturing, comparing it with the theory of optimal remanufacturing policy, and the results indicate that a material savings of more than 45% and a cost improvement of more than 40% could be achieved when the optimal remanufacturing policy of our model is implemented.

A Review of the Literature on Process Innovation in Remanufacturing

Directory of Open Access Journals (Sweden)

Huriye Sabancı Özer

2012-07-01

Full Text Available The aim of this article is to present a concise review of the relationship between environmental sustainability, environmental innovation and remanufacturing. In the past, corporate environment was accounted as an environment determining the firm performance by economic, social, political and technological factors. However, lately, environmental factors are also included into the corporate environment. Recent research studies focus on the Environmental Management System as an extremely effective instrument for organizations; and concentrate on the Environmental Innovation as technological product and process innovation. Product innovation has been widely studied in the areas of new product development, product design for environment, and design for remanufacturing. The studies on remanufacturing show that it can be profitable and can create environmental benefits. However, the literature is insufficient on process innovation. Consequently, environmental innovation as technological product and process innovation results in a reduction of environmental impacts, and there is an emerging need for further studies on process innovation in remanufacturing.

Analysis of the Environmental Impact on Remanufacturing Wind Turbines

Science.gov (United States)

Sosa Skrainka, Manuel R.

To deliver clean energy the use of wind turbines is essential. In June 2011 there was an installed wind capacity equivalent to 211,000MW world-wide (WWEA, 2011). By the end of the year 2009 the U.S. had 35,100MW of wind energy installed capacity to generate electricity (AWEA, 2010). This industry has grown in recent years and is expected to grow even more in the future. The environmental impacts that will arise from the increased number of wind turbines and their end-of-life should be addressed, as large amounts of resources will be required to satisfy the current and future market demands for wind turbines. Since future 10MW wind turbines are expected to be as heavy as 1000 tons each, the study of the environmental response of profitable retirement strategies, such as remanufacturing for these machines, must be considered. Because of the increased number of wind turbines and the materials used, this study provides a comparison between the environmental impacts from remanufacturing the components installed inside the nacelle of multi-megawatt wind turbines and wind turbines manufactured using new components. The study methodology is the following: • Describe the life-cycle and the materials and processes employed for the manufacture and remanufacturing for components inside the nacelle. • Identify remanufacturing alternatives for the components inside the nacelle at the end of the expected life-time service of wind turbines. • Evaluate the environmental impacts from the remanufactured components and compare the results with the impacts of the manufacturing of new components using SimaPro. • Conduct sensitivity analysis over the critical parameters of the life cycle assessment • Propose the most environmentally friendly options for the retirement of each major component of wind turbines. After an analysis of the scenarios the goal of the study is to evaluate remanufacturing as an end-of-life option from an environmental perspective for commercial multi

40 CFR 1033.130 - Instructions for engine remanufacturing or engine installation.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Instructions for engine remanufacturing or engine installation. 1033.130 Section 1033.130 Protection of Environment ENVIRONMENTAL... and Related Requirements § 1033.130 Instructions for engine remanufacturing or engine installation. (a...

Pricing strategy in a dual-channel and remanufacturing supply chain system

Science.gov (United States)

Jiang, Chengzhi; Xu, Feng; Sheng, Zhaohan

2010-07-01

This article addresses the pricing strategy problems in a supply chain system where the manufacturer sells original products and remanufactured products via indirect retailer channels and direct Internet channels. Due to the complexity of that system, agent technologies that provide a new way for analysing complex systems are used for modelling. Meanwhile, in order to reduce the computational load of searching procedure for optimal prices and profits, a learning search algorithm is designed and implemented within the multi-agent supply chain model. The simulation results show that the proposed model can find out optimal prices of original products and remanufactured products in both channels, which lead to optimal profits of the manufacturer and the retailer. It is also found that the optimal profits are increased by introducing direct channel and remanufacturing. Furthermore, the effect of customer preference, direct channel cost and remanufactured unit cost on optimal prices and profits are examined.

Sustainability of Metal Structures via Spray-Clad Remanufacturing

Science.gov (United States)

Smith, Gregory M.; Sampath, Sanjay

2018-04-01

Structural reclamation and remanufacturing is an important future design consideration to allow sustainable recovery of degraded structural metals. Heavy machinery and infrastructure components subjected to extended use and/or environment induced degradation require costly and time-consuming replacement. If these parts can be remanufactured to original tolerances, and returned to service with "as good or better" performance, significant reductions in materials, cost, and environmental impact can be achieved. Localized additive restoration via thermal or cold spray methods is a promising approach in recovering and restoring original design strength of degraded metals. The advent of high velocity spray deposition technologies has allowed deposition of near full density materials. In this review, the fundamental scientific and technological elements of such local additive restoration is contemplated including materials, processes, and methodologies to assess the capabilities of such remanufactured systems. This points to sustainable material reclamation, as well as a route toward resource and process sustainability.

Competition for cores in remanufacturing

NARCIS (Netherlands)

Bulmus, Serra Caner; Zhu, Stuart X.; Teunter, Ruud

2014-01-01

We study competition between an original equipment manufacturer (OEM) and an independently operating remanufacturer (IO). Different from the existing literature, the OEM and IO compete not only for selling their products but also for collecting returned products (cores) through their acquisition

Disassembly for remanufacturing: A systematic literature review, new model development and future research needs

Directory of Open Access Journals (Sweden)

Anjar Priyono

2016-11-01

Full Text Available Purpose: Disassembly is an important process that distinguishes remanufacturing from conventional manufacturing. It is a unique process that becomes focus of investigation from many scholars. Yet, most scholars investigate disassembly from technical and operational standpoint that lack of strategic perspective. This paper attempts to fill this gap by looking at disassembly from a strategic perspective by considering organisational characteristics, process choices and product attributes. To be more specific, this paper has three objectives. First, to gain understanding what has been done, and what need to be done in the field of disassembly in remanufacturing. Second, to conduct a systematic literature review for identifying the factors affecting disassembly for remanufacturing. Third, to propose a new model of disassembly for remanufacturing and also to provide avenues for future research. Design/methodology/approach: This study used a systematic literature review method. A series of steps were undertaken during the review. The study was started with determining the purpose of the study, selecting appropriate keywords, and reducing the selected papers using a number of criteria. A deeper analysis was carried out on the final paper that meets the criteria for this review. Findings: There are two main findings of this study. First, a list of factors affecting disassembly in remanufacturing is identified. The factors can be categorised into three groups: organisational factors, process choices and product attributes. Second, using factors that have been identified, a new model of disassembly process for remanufacturing is developed. Current studies only consider disassembly as a physical activity to break down products into components. In the new model, disassembly is viewed as a process that converts into into output, which consist of a series of steps. Research limitations/implications: The opportunities for future research include: the need to

Disassembly for remanufacturing: A systematic literature review, new model development and future research needs

International Nuclear Information System (INIS)

Priyono, A.; Ijomah, W.; Bititci, U.

2016-01-01

Purpose: Disassembly is an important process that distinguishes remanufacturing from conventional manufacturing. It is a unique process that becomes focus of investigation from many scholars. Yet, most scholars investigate disassembly from technical and operational standpoint that lack of strategic perspective. This paper attempts to fill this gap by looking at disassembly from a strategic perspective by considering organisational characteristics, process choices and product attributes. To be more specific, this paper has three objectives. First, to gain understanding what has been done, and what need to be done in the field of disassembly in remanufacturing. Second, to conduct a systematic literature review for identifying the factors affecting disassembly for remanufacturing. Third, to propose a new model of disassembly for remanufacturing and also to provide avenues for future research. Design/methodology/approach: This study used a systematic literature review method. A series of steps were undertaken during the review. The study was started with determining the purpose of the study, selecting appropriate keywords, and reducing the selected papers using a number of criteria. A deeper analysis was carried out on the final paper that meets the criteria for this review. Findings: There are two main findings of this study. First, a list of factors affecting disassembly in remanufacturing is identified. The factors can be categorised into three groups: organisational factors, process choices and product attributes. Second, using factors that have been identified, a new model of disassembly process for remanufacturing is developed. Current studies only consider disassembly as a physical activity to break down products into components. In the new model, disassembly is viewed as a process that converts into into output, which consist of a series of steps. Research limitations/implications: The opportunities for future research include: the need to develop an index of

Disassembly for remanufacturing: A systematic literature review, new model development and future research needs

Energy Technology Data Exchange (ETDEWEB)

Priyono, A.; Ijomah, W.; Bititci, U.

2016-07-01

Purpose: Disassembly is an important process that distinguishes remanufacturing from conventional manufacturing. It is a unique process that becomes focus of investigation from many scholars. Yet, most scholars investigate disassembly from technical and operational standpoint that lack of strategic perspective. This paper attempts to fill this gap by looking at disassembly from a strategic perspective by considering organisational characteristics, process choices and product attributes. To be more specific, this paper has three objectives. First, to gain understanding what has been done, and what need to be done in the field of disassembly in remanufacturing. Second, to conduct a systematic literature review for identifying the factors affecting disassembly for remanufacturing. Third, to propose a new model of disassembly for remanufacturing and also to provide avenues for future research. Design/methodology/approach: This study used a systematic literature review method. A series of steps were undertaken during the review. The study was started with determining the purpose of the study, selecting appropriate keywords, and reducing the selected papers using a number of criteria. A deeper analysis was carried out on the final paper that meets the criteria for this review. Findings: There are two main findings of this study. First, a list of factors affecting disassembly in remanufacturing is identified. The factors can be categorised into three groups: organisational factors, process choices and product attributes. Second, using factors that have been identified, a new model of disassembly process for remanufacturing is developed. Current studies only consider disassembly as a physical activity to break down products into components. In the new model, disassembly is viewed as a process that converts into into output, which consist of a series of steps. Research limitations/implications: The opportunities for future research include: the need to develop an index of

The Environmental Gains of Remanufacturing: Evidence from the Computer and Mobile Industry

NARCIS (Netherlands)

J. Quariguasi Frota Neto (João); J.M. Bloemhof-Ruwaard (Jacqueline)

2009-01-01

textabstractRemanufacturing has long been perceived as an environmentally-friendly initiative. The question of how remanufacturing moderates the relation between environmental impact and economic returns is still unanswered, however. In this paper, we focus our attention on the electronics industry.

Application of adversarial risk analysis model in pricing strategies with remanufacturing

Directory of Open Access Journals (Sweden)

Liurui Deng

2015-01-01

Full Text Available Purpose: Purpose: This paper mainly focus on the application of adversarial risk analysis (ARA in pricing strategy with remanufacturing. We hope to obtain more realistic results than classical model. Moreover, we also wish that our research improve the development of ARA in pricing strategy of manufacturing or remanufacturing. Approach: In order to gain more actual research, combining adversarial risk analysis, we explore the pricing strategy with remanufacturing based on Stackelberg model. Especially, we build OEM’s 1-order ARA model and further study on manufacturers and remanufacturers’ pricing strategy. Findings: We find the OEM’s 1-order ARA model for the OEM’s product cost C. Besides, we get according manufacturers and remanufacturers’ pricing strategies. Besides, the pricing strategies based on 1-order ARA model have advantage over than the classical model regardless of OEMs and remanufacturers. Research implications: The research on application of ARA imply that we can get more actual results with this kind of modern risk analysis method and ARA can be extensively in pricing strategies of supply chain. Value: Our research improves the application of ARA in remanufacturing industry. Meanwhile, inspired by this analysis, we can also create different ARA models for different parameters. Furthermore, some results and analysis methods can be applied to other pricing strategies of supply chain.

Progress and Challenges of Ultrasonic Testing for Stress in Remanufacturing Laser Cladding Coating

Directory of Open Access Journals (Sweden)

Xiao-Ling Yan

2018-02-01

Full Text Available Stress in laser cladding coating is an important factor affecting the safe operation of remanufacturing components. Ultrasonic testing has become a popular approach in the nondestructive evaluation of stress, because it has the advantages of safety, nondestructiveness, and online detection. This paper provides a review of ultrasonic testing for stress in remanufacturing laser cladding coating. It summarizes the recent research outcomes on ultrasonic testing for stress, and analyzes the mechanism of ultrasonic testing for stress. Remanufacturing laser cladding coating shows typical anisotropic behaviors. The ultrasonic testing signal in laser cladding coating is influenced by many complex factors, such as microstructure, defect, temperature, and surface roughness, among others. At present, ultrasonic testing for stress in laser cladding coating can only be done roughly. This paper discusses the active mechanism of micro/macro factors in the reliability of stress measurement, as well as the impact of stress measurement on the quality and safety of remanufacturing components. Based on the discussion, this paper proposes strategies to nondestructively, rapidly, and accurately measure stress in remanufacturing laser cladding coating.

Optimal core acquisition and pricing strategies for hybrid manufacturing and remanufacturing systems

NARCIS (Netherlands)

Caner Bulmus, Serra; Zhu, Stuart X.; Teunter, Ruud H.

2014-01-01

In this study, we combine two aspects of remanufacturing, namely product acquisition management and marketing (pricing) of the remanufactured products. We consider an original equipment manufacturer (OEM) who decides on the acquisition prices offered for returns from different quality types and on

Pricing and Warranty Level Decisions for New and Remanufactured Short Life-Cycle Products

Directory of Open Access Journals (Sweden)

Gan Shu San

2017-06-01

Full Text Available Remanufacturing has become more prominent as a recovery process to mitigate the massive disposal of short life-cycle product at its end-of-use. However, remanufactured product is often perceived to be inferior to new product, and it has lower value in consumer’s willingness to pay. To increase the perceived quality of the remanufactured product, manufacturer offers a warranty, since one of the three roles possessed in warranty is being a signal to product reliability. This paper studies the pricing decisions and warranty level decision for new and remanufactured products in a closed-loop supply chain consists of a manufacturer and a retailer. The optimization modeling is performed under Stackelberg game with manufacturer as the leader. We found that higher expansion effectiveness coefficient would increase the supply chain profit. Also, there is an interval of demand’s speed of change, where the total profit would be at its highest. The optimum warranty level can be achieved regardless the initial warranty level set at the beginning of retailer’s optimization. Furthermore, the remanufactured product’s wholesale and retail prices are influenced by the expansion effectiveness coefficient.

Quantitative Evaluation of Heavy Duty Machine Tools Remanufacturing Based on Modified Catastrophe Progression Method

Science.gov (United States)

shunhe, Li; jianhua, Rao; lin, Gui; weimin, Zhang; degang, Liu

2017-11-01

The result of remanufacturing evaluation is the basis for judging whether the heavy duty machine tool can remanufacture in the EOL stage of the machine tool lifecycle management.The objectivity and accuracy of evaluation is the key to the evaluation method.In this paper, the catastrophe progression method is introduced into the quantitative evaluation of heavy duty machine tools’ remanufacturing,and the results are modified by the comprehensive adjustment method,which makes the evaluation results accord with the standard of human conventional thinking.Using the catastrophe progression method to establish the heavy duty machine tools’ quantitative evaluation model,to evaluate the retired TK6916 type CNC floor milling-boring machine’s remanufacturing.The evaluation process is simple,high quantification,the result is objective.

Dynamic Pricing and Production Control of an Inventory System with Remanufacturing

Directory of Open Access Journals (Sweden)

Chunyan Gao

2015-01-01

Full Text Available We consider optimal pricing and manufacturing control of a continuous-review inventory system with remanufacturing. Customer demand and product return follow independent Poisson processes. Customer demand is filled by serviceable product, which can be either manufactured or remanufactured from the returned product. The lead times for both manufacturing and remanufacturing are exponentially distributed. The objective is to maximize the expected total discounted profit over an infinite planning horizon. We characterize the structural properties of the optimal policy through the optimality equation. Specifically, the optimal manufacturing policy is a base-stock policy with the base-stock level nonincreasing in the return inventory level. The optimal pricing policy is also a threshold policy, where the threshold level is nonincreasing in the return inventory level.

Remanufacturing Aided Added-Value Creation, Innovations Meeting to Deliver Sustainable Manufacturing

Science.gov (United States)

Tariq Abullah, Ziyad; Guo, Shun Sheng; Yun, Sheng Bu

2015-05-01

End-of-life scrap steel such as vehicles bulks and bodies, steel wheel and shells are easily land filled at the end-of-life when treated in a developing country with non-industrial infrastructure. Research idea is about composite shape steel remanufacturing to be sheet steel for construction application through nested recovered pieces of scrap steel within new sheet steel base to meet innovation value creation of remanufactured steel and innovation eco-design of steel products to close supply chain through linkage developed and developing countries of non-industrial infrastructure economy. That can be satisfied through comprehensive business- education-training model conduction firstly at the developing countries to reduce costs and change the intensive labour remanufacturing paradigm collaboratively. Sustainable remanufacturing business model can be applied based on infrastructure of educational institutions such as institutes of technology to adopt environmental, economic, and social developments as triple bottom line sustainability. Such innovation value creation is driven by eco-design and eco-innovation enabling where the meet to deliver human development, employment, and education conscious environment and bench mark recommendations of development directions for upgrading to apply business that allows eco-societies to emerge, through cooperative steel scrap processing.

The Resource Benefits Evaluation Model on Remanufacturing Processes of End-of-Life Construction Machinery under the Uncertainty in Recycling Price

Directory of Open Access Journals (Sweden)

Qian-wang Deng

2017-02-01

Full Text Available In the process of end-of-life construction machinery remanufacturing, the existence of uncertainties in all aspects of the remanufacturing process increase the difficulty and complexity of resource benefits evaluation for them. To quantify the effects of those uncertainty factors, this paper makes a mathematical analysis of the recycling and remanufacturing processes, building a resource benefits evaluation model for the end-of-life construction machinery. The recycling price and the profits of remanufacturers can thereby be obtained with a maximum remanufacturing resource benefit. The study investigates the change regularity of the resource benefits, recycling price, and profits of remanufacturers when the recycling price, quality fluctuation coefficient, demand coefficient, and the reusing ratio of products or parts are varying. In the numerical experiment, we explore the effects of uncertainties on the remanufacturing decisions and the total expected costs. The simulated analysis shows when the quality fluctuation coefficient is approaching to 1, the values of the profits of remanufacturer, the maximal resource benefits and recycling price grade into constants.

Evaluation of a Remanufacturing for Lithium Ion Batteries from Electric Cars

OpenAIRE

Achim Kampker; Heiner H. Heimes; Mathias Ordung; Christoph Lienemann; Ansgar Hollah; Nemanja Sarovic

2016-01-01

Electric cars with their fast innovation cycles and their disruptive character offer a high degree of freedom regarding innovative design for remanufacturing. Remanufacturing increases not only the resource but also the economic efficiency by a prolonged product life time. The reduced power train wear of electric cars combined with high manufacturing costs for batteries allow new business models and even second life applications. Modular and intermountable designed battery packs enable the re...

Optimization of Two-Level Disassembly/Remanufacturing/Assembly System with an Integrated Maintenance Strategy

Directory of Open Access Journals (Sweden)

Zouhour Guiras

2018-04-01

Full Text Available With an increase of environmental pressure on economic activities, reverse flow is increasingly important. It seeks to save resources, eliminate waste, and improve productivity. This paper investigates the optimization of the disassembly, remanufacturing and assembly system, taking into account assembly-disassembly system degradation. An analytical model is developed to consider disassembly, remanufacturing of used/end-of-life product and assembly of the finished product. The finished product is composed of remanufactured and new components. A maintenance policy is sequentially integrated to reduce the system unavailability. The aim of this study is to help decision-makers, under certain conditions, choose the most cost-effective process for them to satisfy the customer as well as to adapt to the potential risk that can perturb the disassembly-assembly system. A heuristic is developed to determine the optimal ordered date of the used end-of-life product as well as the optimum release dates of new external components. The results reveal that considering some remanufacturing and purchase components costs, the proposed model is more economical in comparison with a model without remanufactured parts. Numerical results are provided to illustrate the impact of the variation of the ordering cost and quality of the used end-of-life product on the system profitability. Finally, the risk due to system repair periods is discussed, which has an impact on managerial decision-making.

A HYBRID GENETIC ALGORITHM-NEURAL NETWORK APPROACH FOR PRICING CORES AND REMANUFACTURED CORES

Directory of Open Access Journals (Sweden)

M. Seidi

2012-01-01

Full Text Available

ENGLISH ABSTRACT:Sustainability has become a major issue in most economies, causing many leading companies to focus on product recovery and reverse logistics. Remanufacturing is an industrial process that makes used products reusable. One of the important aspects in both reverse logistics and remanufacturing is the pricing of returned and remanufactured products (called cores. In this paper, we focus on pricing the cores and remanufactured cores. First we present a mathematical model for this purpose. Since this model does not satisfy our requirements, we propose a simulation optimisation approach. This approach consists of a hybrid genetic algorithm based on a neural network employed as the fitness function. We use automata learning theory to obtain the learning rate required for training the neural network. Numerical results demonstrate that the optimal value of the acquisition price of cores and price of remanufactured cores is obtained by this approach.

AFRIKAANSE OPSOMMING: Volhoubaarheid het ‘n belangrike saak geword in die meeste ekonomieë, wat verskeie maatskappye genoop het om produkherwinning en omgekeerde logistiek te onder oë te neem. Hervervaardiging is ‘n industriële proses wat gebruikte produkte weer bruikbaar maak. Een van die belangrike aspekte in beide omgekeerde logistiek en hervervaardiging is die prysbepaling van herwinne en hervervaardigde produkte. Hierdie artikel fokus op die prysbepalingsaspekte by wyse van ‘n wiskundige model.

Mechanical Characteristic of Remanufacturing of FV520B Precipitation Hardening Stainless Steel Using MAG Surfacing Deposition

Directory of Open Access Journals (Sweden)

LIU Jian

2017-10-01

Full Text Available Surfacing deposition forming method was adopted to carry out remanufacturing experiment of FV520B precipitation hardening stainless steel. Then the mechanical property characteristic of the remanufacturing layer was tested and studied, contrasted with the corresponding property of substrate. The results show that the remanufacturing layer, formed with MAG surfacing of FV520B precipitation hardening stainless steel has mechanical characteristic with high strength and hardness, the tensile strength reaches 1195MPa, exceeds 1092MPa of substrate, yield strength is 776MPa and average hardness is 336HV, is close to the corresponding property of substrate which is 859MPa and 353HV respectively; however, the elongation and impact toughness of the remanufacturing layer is merely 8.92% and 61J/cm2 respectively, it has a large gap with the corresponding property 19.72% and 144J/cm2 respectively of substrate. Fracture and microstructure analysis on specimens shows that the microstructure of remanufacturing layer is fast cooling non-equilibrium crystallized lath martensite, and carbide precipitated strengthening phase such as NbC, MoC, M23C6,etc, which is the reason that remanufacturing layer has high strength and high hardness. But as lack of aging treatment and Cu strengthening phase, and the weak interface between contaminating brittle phase or large size spherical particles and substrate will deteriorate the deformability and induce stress concentration and cracking when the material is load-carrying, and is the main reason of the remanufacturing layer having lower static tensile elongation and impact toughness.

Impact of end of lease contracts’ option on joint pricing and inventory decisions of remanufacturable leased products

Directory of Open Access Journals (Sweden)

M. Rabbani

2016-04-01

Full Text Available Leasing currently plays an important role for the global economy. The equipment leasing earning acquired through leasing rather than cash or credit, has reached a dominant level. With this regards, this paper represents a basic mixed-integer non-linear programming model. The study deliberates a firm that leases new products and remanufactured leased merchandises. The proposed study considers the end of lease contract, which contains several options: Return the leased product, return the used product and purchase other remanufactured product and buying the leased product. The primary objective is to maximize the discrepancy between the revenue and the costs of a firm, which leases new products as well as selling remanufactured ones. The product deteriorates with time and the difference between a new and used good is obvious. The product must undergo a remanufacturing procedure before being sold as a remanufactured product.

RFID/RTLS Application to Remanufacturing Operations in the US Department of Defense

OpenAIRE

Ferrer, Geraldo; Dew, Nicholas

2008-01-01

Sponsored Report (for Acquisition Research Program) The most efficient use of the DoD''s network of remanufacturing depots is an important concern because of the extensive requirement to recapitalize the military equipment used in Iraq and Afghanistan through product recovery. In this report, we consider the use of radio frequency identification (RFID) technology in improving remanufacturing efficiency. We first provide a framework for understanding the choice between permanently tagging...

Government Subsidy for Remanufacturing or Carbon Tax Rebate: Which Is Better for Firms and a Low-Carbon Economy

Directory of Open Access Journals (Sweden)

Tong Shu

2017-01-01

Full Text Available The government as a policy maker wishing to promote remanufacturing and proper disposal of hazardous old products which are harmful to environment has taken many actions, ranging from carbon regulation and financial incentives such as trade-in subsidy. However, carbon tax can result in loss of profit for firms to some degree, so the government has to give other subsidy to balance the profits and carbon emission. Thus, this article investigates two subsidy mechanisms: remanufacturing subsidy or tax rebate. The optimal pricing and production decision under these policies are examined. Our results show that carbon tax has a great impact on pricing strategies. Trade-in subsidy can encourage customers to replace their existing products with new and remanufactured products. Both remanufacture subsidy and tax rebate are beneficial to manufacturer and can further promote remanufacturing development.

40 CFR 92.704 - Notice to manufacturer or remanufacturer of nonconformity; submission of remedial plan.

Science.gov (United States)

2010-07-01

... remanufacturer of nonconformity; submission of remedial plan. 92.704 Section 92.704 Protection of Environment... nonconformity; submission of remedial plan. (a) The manufacturer or remanufacturer will be notified whenever the... category of locomotives or locomotive engines encompassed by the determination of nonconformity, will give...

Pricing Strategies in the Remanufacturing Market for the Uncertain Market Size in the Second Period

Directory of Open Access Journals (Sweden)

Liurui Deng

2016-01-01

Full Text Available Our main endeavor is to investigate the effect of the uncertain market size in the second period on the pricing strategies in the remanufacturing market. Observing the previous research, we find that the market size in the second period is always supposed to be certain. However, there is substantial empirical and experimental evidence that the market size in reality deviates from this assumption. In fact, though the market size in the first period is definitized, it is difficult to confirm the change of the market scale in the second period, since this change is affected by all kinds of elements, such as the awareness of environmental protection, some consumers’ psychological factors, and the related governments’ policies. Hence, we pay attention to the case in which the change rate of the market scale in the second period is random variable. We suppose that this rate satisfies uniform distribution on [0,2]. Underlying this assumption, we further provide an insight into the game-playing relationship between original equipment manufacturers (OEMs and remanufacturers. Moreover, we delicately and subtly incorporate the game theory, stochastic analysis, adversarial risk analysis (ARA, and optimization methods into the pricing strategies in the remanufacturing market. Last but not least, considerable efforts and attempts have been made to subtly test the sensitivity of an optimal solution to the different parameters.

Is remanufacturing effective and eco-efficient?: An analysis of the eco-efficiency of personal computers and mobile phones

OpenAIRE

Quariguasi Frota Neto, João; Bloemhof-Ruwaard, Jacqueline

2009-01-01

textabstractRemanufacturing has long been perceived as an environmentally-friendly initiative, and it is therefore sup- ported by a number of governments, in particular in Europe. Yet, the assumption that remanufacturing is desirable to society has never been systematically investigated. In this paper, we focus our attention on the electronics industry. In particular, we take a close look at remanufacturing within the personal computer and mobile phone industries. We investigate whether reman...

Costing improvement of remanufacturing crankshaft by integrating Mahalanobis-Taguchi System and Activity based Costing

Science.gov (United States)

Abu, M. Y.; Nor, E. E. Mohd; Rahman, M. S. Abd

2018-04-01

Integration between quality and costing system is very crucial in order to achieve an accurate product cost and profit. Current practice by most of remanufacturers, there are still lacking on optimization during the remanufacturing process which contributed to incorrect variables consideration to the costing system. Meanwhile, traditional costing accounting being practice has distortion in the cost unit which lead to inaccurate cost of product. The aim of this work is to identify the critical and non-critical variables during remanufacturing process using Mahalanobis-Taguchi System and simultaneously estimate the cost using Activity Based Costing method. The orthogonal array was applied to indicate the contribution of variables in the factorial effect graph and the critical variables were considered with overhead costs that are actually demanding the activities. This work improved the quality inspection together with costing system to produce an accurate profitability information. As a result, the cost per unit of remanufactured crankshaft of MAN engine model with 5 critical crankpins is MYR609.50 while Detroit engine model with 4 critical crankpins is MYR1254.80. The significant of output demonstrated through promoting green by reducing re-melting process of damaged parts to ensure consistent benefit of return cores.

Discrete harmony search algorithm for scheduling and rescheduling the reprocessing problems in remanufacturing: a case study

Science.gov (United States)

Gao, Kaizhou; Wang, Ling; Luo, Jianping; Jiang, Hua; Sadollah, Ali; Pan, Quanke

2018-06-01

In this article, scheduling and rescheduling problems with increasing processing time and new job insertion are studied for reprocessing problems in the remanufacturing process. To handle the unpredictability of reprocessing time, an experience-based strategy is used. Rescheduling strategies are applied for considering the effect of increasing reprocessing time and the new subassembly insertion. To optimize the scheduling and rescheduling objective, a discrete harmony search (DHS) algorithm is proposed. To speed up the convergence rate, a local search method is designed. The DHS is applied to two real-life cases for minimizing the maximum completion time and the mean of earliness and tardiness (E/T). These two objectives are also considered together as a bi-objective problem. Computational optimization results and comparisons show that the proposed DHS is able to solve the scheduling and rescheduling problems effectively and productively. Using the proposed approach, satisfactory optimization results can be achieved for scheduling and rescheduling on a real-life shop floor.

Analyzing internal barriers for automotive parts remanufacturers in China using grey-DEMATEL approach

DEFF Research Database (Denmark)

Xia, Xiqiang; Govindan, Kannan; Zhu, Qinghua

2015-01-01

analyzes internal barriers met by automotive parts remanufacturers and evaluates causal barriers by a proposed model framework. This objective is illustrated by employing the Grey Decision Making Trial and Evaluation Laboratory (DEMATEL) approach. By virtue of these findings, remanufacturers can eradicate......Automotive industries have attracted attention from international sectors recently. This attention to the industry results in many innovative technologies being integrated in these manufacturing arenas. In developing countries such as the BRIC (Brazil, Russia, India, and China) countries...

The Role of Laser Additive Manufacturing Methods of Metals in Repair, Refurbishment and Remanufacturing - Enabling Circular Economy

Science.gov (United States)

Leino, Maija; Pekkarinen, Joonas; Soukka, Risto

Circular economy is an economy model where products, components, and materials are aimed to be kept at their highest utility and value at all times. Repair, refurbishment and remanufacturing processes are procedures aiming at returning the value of the product during its life cycle. Additive manufacturing (AM) is expected to be an enabling technology in circular economy based business models. One of AM process that enables repair, refurbishment and remanufacturing is Directed Energy Deposition. Respectively Powder Bed Fusion enables manufacturing of replacement components on demand. The aim of this study is to identify the current research findings and state of art of utilizing AM in repair, refurbishment and remanufacturing processes of metallic products. The focus is in identifying possibilities of AM in promotion of circular economy and expected environmental benefits based on the found literature. Results of the study indicate significant potential in utilizing AM in repair, refurbishment and remanufacturing activities.

The Remanufacturing Process of Defense Assets with Stochastic Yield

Science.gov (United States)

2010-05-04

Operational Research, International Journal of Production Economics , Ecological Economics, Business Horizons, Journal of Operations and Supply Chain...remanufacturing. International Journal of Production Economics , 48, 187-204. Guide, V.D.R., Jr., Srivastava, R., & Jayaraman, V. (1998). The effect of

Remanufacturing lot-sizing under alternative perceptions of returned units' quality

Directory of Open Access Journals (Sweden)

Zikopoulos, C.

2012-01-01

Full Text Available One of the critical parameters in reverse supply chain management is the increased variability of the quality condition of used, returned products. The volatile nature of returns' quality often dictates the establishment of quality assessment procedures and the development of technologies that facilitate the fast, accurate and inexpensive classification of returns. The appropriate degree in which a firm has to allocate resources for acquiring information on the quality of returned units, naturally, depends on the anticipated improvement of recovery activities' profitability. Therefore, the quantification of the savings associated with confronting or resolving quality uncertainty is a necessary input during the determination of the proper recovery procedures' configuration. In the current paper, we study a remanufacturing system in a multi-period setting in which returns' quality information is exploited during remanufacturing planning. However, in the decision-making process, certain aspects of the problem examined, such as the quantification of shortage cost, are overlooked or simplified. The objective is to examine the advisability of acquiring advanced quality information in order to be used during sub-optimal decision-making processes, in comparison with alternative policies which do not take explicitly into account returns' quality information. Moreover, through an extensive numerical analysis we examine the implications of alternative considerations regarding returned units' quality on remanufacturing planning, lead-time and service-levels and evaluate their impact on the overall system operational cost.

Is remanufacturing effective and eco-efficient? : An analysis of the eco-efficiency of personal computers and mobile phones

NARCIS (Netherlands)

J. Quariguasi Frota Neto (João); J.M. Bloemhof-Ruwaard (Jacqueline)

2009-01-01

textabstractRemanufacturing has long been perceived as an environmentally-friendly initiative, and it is therefore sup- ported by a number of governments, in particular in Europe. Yet, the assumption that remanufacturing is desirable to society has never been systematically investigated. In this

Remanufacture Systems for Category 1 and 2 Marine Diesel Engines

Science.gov (United States)

EPA maintains a list of remanufacture systems, or “kits”, certified for use with Category 1 and 2 marine diesel engines according to the provisions of 40 CFR Part 1042, Subpart I, and is periodically updated.

Optimal Lease Contract for Remanufactured Equipment

Science.gov (United States)

Iskandar, B. P.; Wangsaputra, R.; Pasaribu, U. S.; Husniah, H.

2018-03-01

In the last two decades, the business of lease products (or equipment) has grown significantly, and many companies acquire equipment through leasing. In this paper, we propose a new lease contract under which a product (or equipment) is leased for a period of time with maximum usage per period (e.g. 1 year). This lease contract has only a time limit but no usage limit. If the total usage per period exceeds the maximum usage allowed in the contract, then the customer (as a lessee) will be charged an additional cost. In general, the lessor (OEM) provides a full coverage of maintenance, which includes PM and CM under the lease contract. It is considered that the lessor offers the lease contract for a remanufactured product. We presume that the price of the lease contract for the remanufactured product is much lower than that of a new one, and hence it would be a more attractive option to the customer. The decision problem for the lessee is to select the best option offered that fits to its requirement, and the decision problem for the lessor is find the optimal maintenance efforts for a given price of the lease option offered. We first find the optimal decisions independently for each party, and then the joint optimal decisions for both parties.

Design for life-cycle profit with simultaneous consideration of initial manufacturing and end-of-life remanufacturing

Science.gov (United States)

Kwak, Minjung; Kim, Harrison

2015-01-01

Remanufacturing is emerging as a promising solution for achieving green, profitable businesses. This article considers a manufacturer that produces new products and also remanufactured versions of the new products that become available at the end of their life cycle. For such a manufacturer, design decisions at the initial design stage determine both the current profit from manufacturing and future profit from remanufacturing. To maximize the total profit, design decisions must carefully consider both ends of product life cycle, i.e. manufacturing and end-of-life stages. This article proposes a decision-support model for the life-cycle design using mixed-integer nonlinear programming. With an aim to maximize the total life-cycle profit, the proposed model searches for an (at least locally) optimal product design (i.e. design specifications and the selling price) for the new and remanufactured products. It optimizes both the initial design and design upgrades at the end-of-life stage and also provides corresponding production strategies, including production quantities and take-back rate. The model is extended to a multi-objective model that maximizes both economic profit and environmental-impact saving. To illustrate, the developed model is demonstrated with an example of a desktop computer.

Product remanufacturing and disposal: A numerical comparison of alternative control strategies

OpenAIRE

Laan, Erwin; Dekker, Rommert; Salomon, Marc

1996-01-01

textabstractIn this paper we consider a single-product, single-echelon production and inventory system with product returns, product remanufacturing, and product disposal. For this system we consider three different procurement and inventory

Triple Recycling Channel Strategies for Remanufacturing of Construction Machinery in a Retailer-Dominated Closed-Loop Supply Chain

Directory of Open Access Journals (Sweden)

Min Huang

2017-12-01

Full Text Available Firms engaged in remanufacturing activities generally adopt more than one recycling channel to collect more used products and gain more profits. This paper explores the optimal strategies for a retailer-dominated closed-loop supply chain (CLSC with a triple recycling channel in the construction machinery remanufacturing context. In this special system, the retailer is the leader and authorized by the original equipment manufacturer (OEM to remanufacture. Moreover, the OEM, the retailer, and the secondary market all take part in the used products collection activities. Considering the differentiation of the OEM, the retailer, and the secondary market in collecting the used construction machinery, a mathematical model of the CLSC system based on reasonable assumptions is built, the closed-form optimal pricing decisions are derived, and the optimal collection efforts allocation strategies are explored within the framework of the game theory. In addition, the impacts of the reverse logistics cost coefficient, the competing coefficient, and the buy-back price coefficient on the supply chain performance are elaborately analyzed. These achievements provide decision makers with managerial insights and offer efficient guidelines for the construction machinery remanufacturing firms to solve similar puzzles.

Thermal recycling and re-manufacturing of glass fibre thermosetting composites

DEFF Research Database (Denmark)

Fraisse, Anthony; Beauson, Justine; Brøndsted, Povl

2016-01-01

The impact of using thermally recycled glass fibre in re-manufactured composites was investigated. A unidirectional glass fibre thermosetting composite laminate was manufactured. The matrix in one part of the laminate was burnt off to recover the glass fibres. These recycled glass fibres were used...

Heat-affected zone microstructure and mechanical properties evolution for laser remanufacturing 35CrMoA axle steel

Science.gov (United States)

Feng, Xiangyi; Dong, Shiyun; Yan, Shixing; Liu, Xiaoting; Xu, Binshi; Pan, Fusheng

2018-03-01

In this article, by using orthogonal test the technological test was conducted and the optimum processing of the remanufacturing35CrMoA axle were obtained. The evolution of microstructure and mechanical property of HAZ were investigated. The microstructure of HAZ was characterized by means of OM and SEM. Meanwhile hardness distribution in HAZ and tensile property of cladding-HAZ-substrate samples were measured. The microstructure of cladding and HAZ were observed. The microsturcture evoltion and the mechanism of harden in the HAZ was discussed and revealed. The results indicated that the remanufacturing part has excellent strength due to grain refining and dispersive distribution of nanoscale cementite. The remanufacturing part will have uniform microstructure and hardness matching with that of 35CrMoA axle by using stress-relieving annealing at 580°.

RFID/RTLS Application to Remanufacturing Operations in the US Department of Defense

National Research Council Canada - National Science Library

Ferrer, Geraldo; Dew, Nicholas

2008-01-01

The most efficient use of the DoD's network of remanufacturing depots is an important concern because of the extensive requirement to recapitalize the military equipment used in Iraq and Afghanistan...

Optimal core acquisition and remanufacturing policies under uncertain core quality fractions

NARCIS (Netherlands)

Teunter, R.H.; Flapper, S.D.P.

2011-01-01

Cores acquired by a remanufacturer are typically highly variable in quality. Even if the expected fractions of the various quality levels are known, then the exact fractions when acquiring cores are still uncertain. Our model incorporates this uncertainty in determining optimal acquisition decisions

Numerical Simulation of Temperature Field and Residual Stress Distribution for Laser Cladding Remanufacturing

Directory of Open Access Journals (Sweden)

Liang Hua

2014-05-01

Full Text Available A three-dimensional finite element model was employed to simulate the cladding process of Ni-Cr-B-Si coatings on 16MnR steel under different parameters of laser power, scanning speed, and spot diameter. The temperature and residual stress distribution, the depth of the heat affected zone (HAZ, and the optimized parameters for laser cladding remanufacturing technology were obtained. The orthogonal experiment and intuitive analysis on the depth of the HAZ were performed to study the influence of different cladding parameters. A new criterion based on the ratio of the maximum tensile residual stress and fracture strength of the substrate was proposed for optimization of the remanufacturing parameters. The result showed well agreement with that of the HAZ analysis.

Integration of Mahalanobis-Taguchi system and traditional cost accounting for remanufacturing crankshaft

Science.gov (United States)

Abu, M. Y.; Norizan, N. S.; Rahman, M. S. Abd

2018-04-01

Remanufacturing is a sustainability strategic planning which transforming the end of life product to as new performance with their warranty is same or better than the original product. In order to quantify the advantages of this strategy, all the processes must implement the optimization to reach the ultimate goal and reduce the waste generated. The aim of this work is to evaluate the criticality of parameters on the end of life crankshaft based on Taguchi’s orthogonal array. Then, estimate the cost using traditional cost accounting by considering the critical parameters. By implementing the optimization, the remanufacturer obviously produced lower cost and waste during production with higher potential to gain the profit. Mahalanobis-Taguchi System was proven as a powerful method of optimization that revealed the criticality of parameters. When subjected the method to the MAN engine model, there was 5 out of 6 crankpins were critical which need for grinding process while no changes happened to the Caterpillar engine model. Meanwhile, the cost per unit for MAN engine model was changed from MYR1401.29 to RM1251.29 while for Caterpillar engine model have no changes due to the no changes on criticality of parameters consideration. Therefore, by integrating the optimization and costing through remanufacturing process, a better decision can be achieved after observing the potential profit will be gained. The significant of output demonstrated through promoting sustainability by reducing re-melting process of damaged parts to ensure consistent benefit of return cores.

Eco-efficient based logistics network design in hybrid manufacturing/ remanufacturing system in low-carbon economy

Directory of Open Access Journals (Sweden)

Yacan Wang

2013-03-01

Full Text Available Purpose: Low-carbon economy requires the pursuit of eco-efficiency, which is a win-win situation between economic and environmental efficiency. In this paper the question of trading off the economic and environmental effects embodied in eco-efficiency in the hybrid manufacturing/remanufacturing logistics network design in the context of low-carbon economy is examined.Design/methodology/approach: A multi-objective mixed integer linear programming model to find the optimal facility locations and materials flow allocation is established. In the objective function, three minimum targets are set: economic cost, CO2 emission and waste generation. Through an iterative algorithm, the Pareto Boundary of the problem is obtained.Findings: The results of numeric study show that in order to achieve a Pareto improvement over an original system, three of the critical rates (i.e. return rate, recovery rate, and cost substitute rate should be increased.Practical implications: To meet the need of low-carbon dioxide, an iso- CO2 emission curve in which decision makers have a series of optimal choices with the same CO2 emission but different cost and waste generation is plotted. Each choice may have different network design but all of these are Pareto optimal solutions, which provide a comprehensive evaluation of both economics and ecology for the decision making.Originality/value: This research chooses carbon emission as one of the three objective functions and uses Pareto sets to analyze how to balance profitability and environmental impacts in designing remanufacturing closed-loop supply chain in the context of low-carbon economy.

Market prices of remanufactured, used and new items: Evidence from eBay

NARCIS (Netherlands)

Quariguasi Frota Neto, J.; Bloemhof, J.M.; Corbett, C.J.

2016-01-01

Extending the life-cycle of products has received ample attention in the field of reverse logistics, but research on the market acceptance of remanufactured products is still in its infancy, especially how they compare to used products. In this paper, we investigate how consumers perceive

AV-8B Remanufacture Program as Part of the Audit of the Defense Acquisition Board Review Process - FY 1994

Science.gov (United States)

1994-06-03

wft*:¥A:ft:i:ft& OFFICE OF THE INSPECTOR GENERAL AV-8B REMANUFACTURE PROGRAM AS PART OF THE AUDIT OF THE DEFENSE ACQUISITION BOARD...Part of the Audit of the Defense Acquisition Board Review Process - FY 1994 B. DATE Report Downloaded From the Internet: 03/23/99 C. Report’s Point...NAVY FOR RESEARCH DEVELOPMENT AND ACQUISITION SUBJECT: Audit Report on the AV-8B Remanufacture Program as Part of the Audit of the Defense

Pricing decision model for new and remanufactured short-life cycle products with time-dependent demand

Directory of Open Access Journals (Sweden)

Shu San Gan

2015-12-01

Full Text Available In this study we develop a model that optimizes the price for new and remanufactured short life-cycle products where demands are time-dependent and price sensitive. While there has been very few published works that attempt to model remanufacturing decisions for products with short life cycle, we believe that there are many situations where remanufacturing short life cycle products is rewarding economically as well as environmentally. The system that we model consists of a retailer, a manufacturer, and a collector of used product from the end customers. Two different scenarios are evaluated for the system. The first is the independent situation where each party attempts to maximize his/her own total profit and the second is the joint profit model where we optimize the combined total profit for all three members of the supply chain. Manufacturer acts as the Stackelberg leader in the independently optimized scenario, while in the other the intermediate prices are determined by coordinated pricing policy. The results suggest that (i reducing the price of new products during the decline phase does not give better profit for the whole system, (ii the total profit obtained from optimizing each player is lower than the total profit of the integrated model, and (iii speed of change in demand influences the robustness of the prices as well as the total profit gained.

Feasibility assessment of remanufacturing, repurposing, and recycling of end of vehicle application lithium-ion batteries

Directory of Open Access Journals (Sweden)

Meaghan Foster

2014-06-01

Full Text Available Purpose: Lithium-ion batteries that are commonly used in electric vehicles and plug-in electric hybrid vehicles cannot be simply discarded at the end of vehicle application due to the materials of which they are composed. In addition the US Department of Energy has estimated that the cost per kWh of new lithium-ion batteries for vehicle applications is four times too high, creating an economic barrier to the widespread commercialization of plug-in electric vehicles. (USDOE 2014. Thus, reducing this cost by extending the application life of these batteries appears to be necessary. Even with an extension of application life, all batteries will eventually fail to hold a charge and thus become unusable. Thus environmentally safe disposition must be accomplished. Addressing these cost and environmental issues can be accomplished by remanufacturing end of vehicle life lithium ion batteries for return to vehicle applications as well as repurposing them for stationary applications such as energy storage systems supporting the electric grid. In addition, environmental safe, “green” disposal processes are required that include disassembly of batteries into component materials for recycling. The hypotheses that end of vehicle application remanufacturing, repurposing, and recycling are each economic are examined. This assessment includes a forecast of the number of such batteries to ensure sufficient volume for conducting these activities.Design/methodology/approach: The hypotheses that end of vehicle application remanufacturing, repurposing, and recycling are economic are addressed using cost-benefit analysis applied independently to each. Uncertainty is associated with all future costs and benefits. Data from a variety of sources are combined and reasonable assumptions are made. The robustness of the results is confirmed by sensitivity analysis regarding each key parameter. Determining that a sufficient volume of end of vehicle application lithium

Optimal Prices and Trade-in Rebates for Durable, Remanufacturable Products

OpenAIRE

Saibal Ray; Tamer Boyaci; Necati Aras

2005-01-01

Most durable products have two distinct types of customers: first-time buyers and customers who already own the product, but are willing to replace it with a new one or purchase a second one. Firms usually adopt a price-discrimination policy by offering a trade-in rebate only to the replacement customers to hasten their purchase decisions. Any return flow of products induced by trade-in rebates has the potential to generate revenues through remanufacturing operations. In this paper, we study ...

Pricing and Remanufacturing Decisions of a Decentralized Fuzzy Supply Chain

Directory of Open Access Journals (Sweden)

Jing Zhao

2013-01-01

costs, and the collecting scaling parameters of the two retailers. The purpose of this paper is to explore how the manufacturer and the two retailers make their own decisions about wholesale price, retail prices, and the remanufacturing rates in the expected value model. Using game theory and fuzzy theory, we examine each firm’s strategy and explore the role of the manufacturer and the two retailers over three different game scenarios. We get some insights into the economic behavior of firms, which can serve as the basis for empirical study in the future.

A new approach for controlling a hybrid stochastic manufacturing / remanufacturing system with inventories and different leadtimes

NARCIS (Netherlands)

Kiesmüller, G.P.

2003-01-01

This paper addresses the control problem of a stochastic recovery system with two stocking points and different leadtimes for production and remanufacturing. For such systems the optimal control policy for a linear cost model is not known. Therefore, in the literature several heuristic policies are

Understanding the purchase intention towards remanufactured product in closed-loop supply chains : An empirical study in China

NARCIS (Netherlands)

Wang, Y.; Wiegerinck, V.J.J.; Krikke, H.R.; Zhang, H.

2013-01-01

Purpose – The paper aims to explore the reasons underlying the key assumption in the closed-loop supply chain (CLSC) literature that consumers' purchase intention is lower for remanufactured products than for new products. It aims to complement the predominantly operation-focused CLSC research by

76 FR 44606 - Remanufactured Goods: An Overview of the U.S. and Global Industries, Markets, and Trade...

Science.gov (United States)

2011-07-26

..., trade, and investment in U.S. remanufactured goods, including a discussion of recent trends. To the extent possible, the report will also include the following: An assessment of foreign direct investment... of employment, investment, and sales (including in the domestic market and exports); The U.S. market...

Better Demand Signal, Better Decisions? Evaluation of Big Data in a Licensed Remanufacturing Supply Chain with Environmental Risk Considerations.

Science.gov (United States)

Niu, Baozhuang; Zou, Zongbao

2017-08-01

Big data ability helps obtain more accurate demand signal. However, is better demand signal always beneficial for the supply chain parties? To answer this question, we investigate a remanufacturing supply chain (RSC), where demand uncertainty is significant, and the value to reduce environmental risk is large. Specifically, we focus on a licensed RSC comprising an original equipment manufacturer (OEM) and a third-party remanufacturer (3PR). The latter pays a unit license fee to the former, and can be risk averse to the demand of remanufactured products. We show that the OEM and the risk-neutral 3PR always have incentives to improve their big data abilities to increase their profits. However, when the 3PR is risk averse, big data might hurt its profit: the value of big data is positive if its demand signal accuracy is sufficiently low. Interestingly, we find that while information sharing hurts the 3PR, it benefits the OEM as well as the supply chain. Thus, if costly information sharing is allowed, a win-win situation can be achieved. We also find that information sharing generates more valuation when the 3PR is risk averse than that when the 3PR is risk neutral. More importantly, we find that the 3PR's risk attitude and demand signal accuracy can significantly mitigate the negative environmental impact (measured by the amount of the waste): (1) the more risk neutral the 3PR is, the better the environment is; (2) the more accurate demand signal is, the better the environment is. © 2017 Society for Risk Analysis.

Intelligent Sensing for Robotic Re-Manufacturing in Aerospace - An Industry 4.0 Design Based Prototype

OpenAIRE

French, R.; Benakis, M.; Marin-Reyes, H.

2018-01-01

Emerging through an industry-academia\\ud collaboration between the University of Sheffield and VBC\\ud Instrument Engineering Ltd, a proposed robotic solution for remanufacturing\\ud of jet engine compressor blades is under ongoing\\ud development, producing the first tangible results for evaluation.\\ud Having successfully overcome concept adaptation, funding\\ud mechanisms, design processes, with research and development\\ud trials, the stage of concept optimization and end-user application\\ud ha...

77 FR 11157 - Remanufactured Goods: An Overview of the U.S. and Global Industries, Markets, and Trade; Change...

Science.gov (United States)

2012-02-24

... the U.S. and Global Industries, Markets, and Trade; Change in Start Time of Public Hearing AGENCY... investigation No. 332-525, Remanufactured Goods: An Overview of the U.S. and Global Industries, Markets, and... INFORMATION CONTACT: Project Leader Alan Treat (202-205- 3426 or [email protected] ), Deputy Project Leader...

THE MARKET ENTRANCE FOR THE REMANUFACTURER UNDER THE ADVERTISING POLICY OF ORIGINAL MANUFACTURER%制造商广告保护下再制造商的市场进入决策

Institute of Scientific and Technical Information of China (English)

黄宗盛; 聂佳佳; 赵彬

2016-01-01

研究了再制造商面对原制造商时的市场进入问题.原制造商为了保护其市场,常常会采取广告,专利等措施来限制再制造商的进入.文章构建了原制造商广告保护下再制造商的市场进入模型.求解得到广告保护前后制造商和再制造商的最优策略,推导得到两种情况下再制造商的市场进入门槛,对比分析了广告保护对双方的影响,研究发现:广告保护在提高原制造商利润水平的同时降低了再制造商的利润水平;广告保护提高了再制造商的进入门槛,此时再制造商只有进一步降低再制造成本才能进入市场.政府部门应当制定适当政策扶持处于不利地位的再制造企业,为再制造商进入市场创造一定条件,从而推动低碳经济的发展.%The original manufacturer could adopt advertising strategy which can influence purchase choice of consumer to the product when facing the market competition from the third party remanufacturer.The advertising strategy of the manufacturer which is used to restraint the remanufacturer is studied.The optimal strategy of both manufacturer and remanufacturer is solved in both settings when the manufacturer not adopts and adopts the advertising strategy.The market entrance condition for the remanufacturer is derived in both settings.The influence which comes from the advertising strategy of manufacturer to both manufacturer and remanufacturer is analyzed.Advertising could improve the profit level of manufacturer and meantime reduce the profit level of remanufacturer.And the market entrance condition of remanufacturer is enhanced due to the advertising strategy of manufacturer.

Acquisition Pricing and Inventory Decisions on Dual-Source Spare-Part System with Final Production and Remanufacturing

Directory of Open Access Journals (Sweden)

Yancong Zhou

2016-01-01

Full Text Available The life spans of durable goods are longer than their warranty periods. To satisfy the service demand of spare parts and keep the market competition advantage, enterprises have to maintain the longer inventory planning of spare parts. However, how to obtain a valid number of spare parts is difficult for those enterprises. In this paper, we consider a spare-part inventory problem, where the inventory can be replenished by two ways including the final production order and the remanufacturing way. Especially for the remanufacturing way, we consider the acquisition management problem of used products concerning an acquisition pricing decision. In a multiperiod setting, we formulate the problem into a dynamic optimization problem, where the system decisions include the final production order and acquisition price of used products at each period. By stochastic dynamic programming, we obtain the optimal policy of the acquisition pricing at each period and give the optimal policy structure of the optimization problem at the first period. Then, a recursion algorithm is designed to calculate the optimal decisions and the critical points in the policy. Finally, the numerical analyses show the effects of demand information and customer’s sensitive degree on the related decisions and the optimal cost.

Strategic closed-loop facility location problem with carbon market trading

DEFF Research Database (Denmark)

Diabat, A.; Abdallah, T.; Al-Refaie, A.

2013-01-01

and recovery of products in a closed-loop configuration. Remanufacturing is the basis of profit-oriented reverse logistics in which recovered products are restored to a marketable condition in order to be resold to the primary or secondary market. In this paper, we introduce a multiechelon multicommodity...... facility location problem with a trading price of carbon emissions and a cost of procurement. The company might either incur costs if the carbon cap, normally assigned by regulatory agencies, is lower than the total emissions, or gain profit if the carbon cap is higher than the total emissions. A numerical...

The Formation Mechanism of Consumer Purchase Intention for Remanufactured Products：Grounded Theory Research Based on Remanufactured Cell-phones%消费者对再制造产品购买意愿的形成机制--基于官翻手机的扎根理论研究

Institute of Scientific and Technical Information of China (English)

俞明南; 王成成; 高翔

2016-01-01

With the advantages of environmental protection ,resource saving and cost saving ,re‐manufactured products have been widely recognized by the government ,the public and the enter‐prises .However ,in areas such as electronic products ,consumers’ market reaction is not so posi‐tive ,which limits the sustainable development of remanufactured products .This paper uses the basic method of grounded theory ,based on effective consumer comments collected from online fo‐rums ,to tap first hand feedback information provided by consumers .It aims to find the main fac‐tors affecting consumer purchase intention for remanufactured products and the formation mecha‐nism of purchase intention .T his study finds that :(1)Due to the special attributes of remanufac‐tured products ,the formation process of consumers’ purchase intention comprises the formation stage of attitude and the evaluation stage of perceived value ,the positive attitude being the pre‐condition to entering the stage of perceived value evaluation .(2)In the specific context of stud‐ying consumers purchase intention for remanufactured products ,consumer attitudes comprise two dimensions of trust degree and psychological acceptance of remanufactured products .These new findings reveal that the formation mechanism of purchase intention for remanufactured products is different from that of ordinary products ;it has its own characteristics .This paper also answers why the remanufactured products (such as auto parts)that cater to corporate customers develop more rapidly than the direct‐to‐consumer remanufactured products (such as electronics ) ,w hich has enriched the research on purchase behavior .%再制造产品以其环保、节约资源和低成本的优势得到了政府、公众和企业的广泛认同，但在电子产品等领域，消费者并不积极的市场反应在一定程度上限制了再制造产品的持续发展。本研究采用�

Couple of biomimetic surfaces with different morphologies for remanufacturing nonuniform wear rail surface

Science.gov (United States)

Sui, Qi; Zhou, Hong; Yang, Lin; Zhang, Haifeng; Feng, Li; Zhang, Peng

2018-02-01

In this work, biomimetic laser treatment was performed on repairing and remanufacturing the nonuniform worn rail surface. The wearing depth distribution of three work regions of a failure rail surface was discussed, and different thickness hardening layers with different microstructure, microhardness and wear resistances were detected from the worm surfaces. Varying wear resistances of the surfaces with different biomimetic morphologies were obtained by biomimetic laser treatments, and the corresponding effect on the lubrication sliding wear of treated and untreated surfaces were studied for comparative study. In addition, the relationship between wear resistance and the spacing of units was also provided, which can lay the important theoretical foundation for avoiding the wear resistance of the serious worn surface is less than that of the slight worn surface in the future practical applications.

Reuse and remanufacturing as a sustainable business strategy for small and medium enterprises (SME's ) : a practice based approach and transferred into a practical course for students business engineering

NARCIS (Netherlands)

Dr. ir. Jan Venselaar; D. van de Kelft

2011-01-01

Reuse and remanufacturing of product parts and modules has shown to reduce costs, and also leads to substantial reductions in energy use and material losses during the whole product lifecycle. Furthermore it stimulates in its wake new business opportunities regionally. Together with small and medium

Variation in fistula use across dialysis facilities: is it explained by case-mix?

Science.gov (United States)

Tangri, Navdeep; Moorthi, Ranjani; Tighiouhart, Hocine; Meyer, Klemens B; Miskulin, Dana C

2010-02-01

Arteriovenous fistulas (AVFs) remain the preferred vascular access for hemodialysis patients. Dialysis facilities that fail to meet Centers for Medicare & Medicaid Services goals cite patient case-mix as a reason for low AVF prevalence. This study aimed to determine the magnitude of the variability in AVF usage across dialysis facilities and the extent to which patient case-mix explains it. The vascular access used in 10,112 patients dialyzed at 173 Dialysis Clinic Inc. facilities from October 1 to December 31, 2004, was evaluated. The access in use was considered to be an AVF if it was used for >70% of hemodialysis treatments. Mixed-effects models with a random intercept for dialysis facilities evaluated the effect of facilities on AVF usage. Sequentially adjusted multivariate models measured the extent to which patient factors (case-mix) explain variation across facilities in AVF rates. 3787 patients (38%) were dialyzed using AVFs. There was a significant facility effect: 7.6% of variation in AVF use was attributable to facility. This was reduced to 7.1% after case-mix adjustment. There were no identified specific facility-level factors that explained the interfacility variation. AVF usage varies across dialysis facilities, and patient case-mix did not reduce this variation. In this study, 92% of the total variation in AVF usage was due to patient factors, but most were not measurable. A combination of patient factors and process indicators should be considered in adjudicating facility performance for this quality indicator.

Evaluating malaria case management at public health facilities in two provinces in Angola.

Science.gov (United States)

Plucinski, Mateusz M; Ferreira, Manzambi; Ferreira, Carolina Miguel; Burns, Jordan; Gaparayi, Patrick; João, Lubaki; da Costa, Olinda; Gill, Parambir; Samutondo, Claudete; Quivinja, Joltim; Mbounga, Eliane; de León, Gabriel Ponce; Halsey, Eric S; Dimbu, Pedro Rafael; Fortes, Filomeno

2017-05-03

Malaria accounts for the largest portion of healthcare demand in Angola. A pillar of malaria control in Angola is the appropriate management of malaria illness, including testing of suspect cases with rapid diagnostic tests (RDTs) and treatment of confirmed cases with artemisinin-based combination therapy (ACT). Periodic systematic evaluations of malaria case management are recommended to measure health facility readiness and adherence to national case management guidelines. Cross-sectional health facility surveys were performed in low-transmission Huambo and high-transmission Uíge Provinces in early 2016. In each province, 45 health facilities were randomly selected from among all public health facilities stratified by level of care. Survey teams performed inventories of malaria commodities and conducted exit interviews and re-examinations, including RDT testing, of a random selection of all patients completing outpatient consultations. Key health facility readiness and case management indicators were calculated adjusting for the cluster sampling design and utilization. Availability of RDTs or microscopy on the day of the survey was 71% (54-83) in Huambo and 85% (67-94) in Uíge. At least one unit dose pack of one formulation of an ACT (usually artemether-lumefantrine) was available in 83% (66-92) of health facilities in Huambo and 79% (61-90) of health facilities in Uíge. Testing rates of suspect malaria cases in Huambo were 30% (23-38) versus 69% (53-81) in Uíge. Overall, 28% (13-49) of patients with uncomplicated malaria, as determined during the re-examination, were appropriately treated with an ACT with the correct dose in Huambo, compared to 60% (42-75) in Uíge. Incorrect case management of suspect malaria cases was associated with lack of healthcare worker training in Huambo and ACT stock-outs in Uíge. The results reveal important differences between provinces. Despite similar availability of testing and ACT, testing and treatment rates were lower in

A Closed-Loop Supply Chain under Retail Price and Quality Dependent Demand with Remanufacturing and Refurbishing

Science.gov (United States)

Christy, A. Y.; Fauzi, B. N.; Kurdi, N. A.; Jauhari, W. A.; Saputro, D. R. S.

2017-06-01

The demand of a product is linearly dependent on the retail price and quality of the product. We address a closed-loop supply chain where the manufacturer manufactures products according to the demand and sells them through a retailer in the market. A third party collects the used products from costumers and sends to the manufacturer to increase the quality. If the products can retrieve the original quality, thus the process is called remanufacturing. Not every products can retrieve the original quality, thus manufacturer refurbish this products with lower price. We construct four different scenarios - centralized and decentralized led by manufacturer, retailer, and third party. From the comparison of the result obtained in the numerical example, we conclude that the joint profit obtained under centralized, manufacturer-led, and retailer-led policies is higher than third party-led policy.

Forensic investigation of suicide cases in major Greek correctional facilities.

Science.gov (United States)

Sakelliadis, E I; Vlachodimitropoulos, D G; Goutas, N D; Panousi, P I; Logiopoulou, A-P I; Delicha, E M; Spiliopoulou, C A

2013-11-01

According to Greek legislation the medico-legal investigation of deaths occurring in prisons is mandatory. Furthermore, in cases of suicide or of suspected suicide the contribution of medico-legal investigation is of grave importance. The current paper addresses the medico-legal investigation of suicide cases in Greek correctional facilities and aims to describe the current situation. Our study consists of the meticulous research in the data records of major Greek correctional facilities, for the time period 1999-2010. Official permission was obtained by the Hellenic Ministry of Justice, which provided us the access to the records. Data was also collected from the Piraeus Forensic Service, from the Department of Pathological Anatomy of the University of Athens and finally from our own records. Measures were taken to respect the anonymity of the cases. Data was collected for the social, penal, medical history as well as for the medico-legal investigation. It appears that 85.7% of suicide cases were transferred to the Prisoner's Hospital (p < 0.0001), the forensic pathologist who conducted the PME did not perform scene investigation in none of the 70 suicide cases. In a total of 70 cases, histopathological examination, was requested only in 30 cases (42.9%). Hanging was the preferred method for those who committed suicide, followed by the poisoning due to psychoactive substances. Understanding the mistakes made during the forensic investigation of suicide cases inside correctional facilities is necessary, in order to prevent them from occurring again in the future, by implementing appropriate new policies and guidelines. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

Comprehensive safety cases for radioactive waste management facilities

International Nuclear Information System (INIS)

Woollam, P.B.

1993-01-01

Probabilistic safety assessment methodology is being applied by Nuclear Electric plc (NE) to the development of comprehensive safety cases for the radioactive waste management processing and accumulation facilities associated with its 26 reactor systems. This paper describes the methodology and the safety case assessment criteria employed by NE. An overview of the results from facilities used by the first 16 reactors is presented, together with more detail of a specific safety analysis: storage of fuel element debris. No risk to the public greater than 10 -6 /y has been identified and the more significant risks arise from the potential for radioactive waste fires. There are no unacceptable risks from external hazards such as flooding, aircrash or seismic events. Some operations previously expected to have significant risks in fact have negligible risks, while the few faults with risks exceeding the assessment criteria were only identified as a result of this study

Reuse of assembly systems: a great ecological and economical potential for facility suppliers

Science.gov (United States)

Weule, Hartmut; Buchholz, Carsten

2001-02-01

In addition to the consumer goods, capital goods offer a great potential for ecological and economic optimization. In view of this fact the project WiMonDi (Re-Use of Assembly Systems as new Business Fields), started in September 1998, focuses a marketable Remanufacturing and Re-Use of modules and components of assembly systems by using technically and organizationally continuous concepts. The objective of the closed Facility-Management-System is to prolong the serviceable lifespan of assembly facilities through the organized dismantling, refurbishment and reconditioning of the assembly facilities as well as their components. Therefore, it is necessary to develop easible and methodical strategies to realize a workable Re-Use concept. Within the project the focus is based on the optimization of Re-Use-strategies - the direct Re-Use, the Re-Use including Refurbishment as well as Material Recycling. The decision for an optimal strategy depends on economical (e.g. residual value, cost/benefit of relevant processes, etc.), ecological (e.g. pollutant components /substances), etc.) and technical parameters (e.g. reliability, etc.). For the purpose to integrate the total cost-of-ownership of products or components, WiMonDi integrates the costs of the use of products as well as the Re-Use costs/benefits. To initiate the conception of new distribution and user models between the supplier and the user of assembly facilities the described approach is conducted in close cooperation between Industry and University.

Quality of malaria case management in Malawi: results from a nationally representative health facility survey.

Science.gov (United States)

Steinhardt, Laura C; Chinkhumba, Jobiba; Wolkon, Adam; Luka, Madalitso; Luhanga, Misheck; Sande, John; Oyugi, Jessica; Ali, Doreen; Mathanga, Don; Skarbinski, Jacek

2014-01-01

Malaria is endemic throughout Malawi, but little is known about quality of malaria case management at publicly-funded health facilities, which are the major source of care for febrile patients. In April-May 2011, we conducted a nationwide, geographically-stratified health facility survey to assess the quality of outpatient malaria diagnosis and treatment. We enrolled patients presenting for care and conducted exit interviews and re-examinations, including reference blood smears. Moreover, we assessed health worker readiness (e.g., training, supervision) and health facility capacity (e.g. availability of diagnostics and antimalarials) to provide malaria case management. All analyses accounted for clustering and unequal selection probabilities. We also used survey weights to produce estimates of national caseloads. At the 107 facilities surveyed, most of the 136 health workers interviewed (83%) had received training on malaria case management. However, only 24% of facilities had functional microscopy, 15% lacked a thermometer, and 19% did not have the first-line artemisinin-based combination therapy (ACT), artemether-lumefantrine, in stock. Of 2,019 participating patients, 34% had clinical malaria (measured fever or self-reported history of fever plus a positive reference blood smear). Only 67% (95% confidence interval (CI): 59%, 76%) of patients with malaria were correctly prescribed an ACT, primarily due to missed malaria diagnosis. Among patients without clinical malaria, 31% (95% CI: 24%, 39%) were prescribed an ACT. By our estimates, 1.5 million of the 4.4 million malaria patients seen in public facilities annually did not receive correct treatment, and 2.7 million patients without clinical malaria were inappropriately given an ACT. Malawi has a high burden of uncomplicated malaria but nearly one-third of all patients receive incorrect malaria treatment, including under- and over-treatment. To improve malaria case management, facilities must at minimum have

Case studies: Mining and milling activities - South African facilities

International Nuclear Information System (INIS)

Metcalf, P.E.; Woude, S. van der

2000-01-01

The mining and milling of minerals is a very important industry in South Africa that employs more than 300,000 people. South Africa extracts minerals with naturally occurring radionuclides, amongst which uranium, monazite and zircon. Two case studies involving environmental restoration activities that are typically associated with mining and minerals processing are discussed. The first case study, Katdoringbos, describes the restoration of a contaminated site where scrap material originating from the mining and minerals processing facilities had been recycled. The other case study, Crown 4, deals with the restoration of a contaminated site where a mine tailings dam had been removed and the owner of the land wished to develop it for commercial exploitation. (author)

Case study : a transformer repair facility

Energy Technology Data Exchange (ETDEWEB)

Jerade, L. [Jacques Whitford Environment Ltd., Vancouver, BC (Canada)

2006-07-01

Polychlorinated biphenyls (PCBs) are synthetic chemical compounds consisting of chlorine, carbon and hydrogen. They are very stable, fire resistant, do not conduct electricity and have low volatility at normal temperatures. They were mainly used as a cooling and insulating fluid for industrial transformers and capacitors. Some of the same properties that made PCBs so widely used, also make them environmentally hazardous, especially their extreme resistance to chemical and biological breakdown by natural processes in the environment. Typical chemicals associated with the presence of PCB oils are chlorobenzene, lead, xylene, and petroleum hydrocarbons. A case study of a transformer repair facility was discussed along with its soil and groundwater remediation. This presentation discussed the delineation program for the site which operated as a repair facility of PCB-containing transformers from 1968 until 1998. The property was bought by Siemens Canada Ltd. in 1998 and was sold in 2004. As part of the purchasing agreement, a Certificate of Compliance from the British Columbia Ministry of Environment was required. Remediation work was therefore needed. The presentation also covered: zones of contamination and contaminants of concern, soil impacts, groundwater impacts, and an evaluation of remediation options. In-situ treatment of soil with hydrogen peroxide and the selected remedial option were discussed. A soil economic analysis was also conducted. Last, challenges, solutions, and conclusions were presented. tabs., figs.

Strategic planning and marketing research for older, inner-city health care facilities: a case study.

Science.gov (United States)

Wood, V R; Robertson, K R

1992-01-01

Numerous health care facilities, located in downtown metropolitan areas, now find themselves surrounded by a decaying inner-city environment. Consumers may perceive these facilities as "old," and catering to an "urban poor" consumer. These same consumers may, therefore, prefer to patronize more modern facilities located in suburban areas. This paper presents a case study of such a health care facility and how strategic planning and marketing research were conducted in order to identify market opportunities and new strategic directions.

High-risk facilities. Emergency management in nuclear, chemical and hazardous waste facilities

International Nuclear Information System (INIS)

Kloepfer, Michael

2012-01-01

The book on emergency management in high-risk facilities covers the following topics: Change in the nuclear policy, risk management of high-risk facilities as a constitutional problem - emergency management in nuclear facilities, operational mechanisms of risk control in nuclear facilities, regulatory surveillance responsibilities for nuclear facilities, operational mechanism of the risk control in chemical plants, regulatory surveillance responsibilities for chemical facilities, operational mechanisms of the risk control in hazardous waste facilities, regulatory surveillance responsibilities for hazardous waste facilities, civil law consequences in case of accidents in high-risk facilities, criminal prosecution in case of accidents in high-risk facilities, safety margins as site risk for emission protection facilities, national emergency management - strategic emergency management structures, warning and self-protection of the public in case of CBRN hazards including aspects of the psych-social emergency management.

Fatal chlorine gas exposure at a metal recycling facility: Case report.

Science.gov (United States)

Harvey, Robert R; Boylstein, Randy; McCullough, Joel; Shumate, Alice; Yeoman, Kristin; Bailey, Rachel L; Cummings, Kristin J

2018-06-01

At least four workers at a metal recycling facility were hospitalized and one died after exposure to chlorine gas when it was accidentally released from an intact, closed-valved cylinder being processed for scrap metal. This unintentional chlorine gas release marks at least the third such incident at a metal recycling facility in the United States since 2010. We describe the fatal case of the worker whose clinical course was consistent with acute respiratory distress syndrome (ARDS) following exposure to high concentrations of chlorine gas. This case report emphasizes the potential risk of chlorine gas exposure to metal recycling workers by accepting and processing intact, closed-valved containers. The metal recycling industry should take steps to increase awareness of this established risk to prevent future chlorine gas releases. Additionally, public health practitioners and clinicians should be aware that metal recycling workers are at risk for chlorine gas exposure. © 2018 Wiley Periodicals, Inc.

Comprehensive safety cases for radioactive waste management facilities

International Nuclear Information System (INIS)

Woollam, P.B.; Cameron, H.M.; Davies, A.R.; Hiscox, A.W.

1995-01-01

Probabilistic safety assessment methodology has been applied by Nuclear Electric plc (NE) to the development of comprehensive safety cases for the radioactive waste management processing and accumulation facilities associated with its 26 reactor systems. This paper describes the methodology and the safety case assessment criteria employed by NE. An overview of the results is presented, together with more detail of a specific safety analysis: storage of fuel element debris. No risk to the public greater than 10 -6 /y has been identified and the more significant risks arise from the potential for radioactive waste fires. There are no unacceptable risks from external hazards such as flooding, aircrash or seismic events. Some operations previously expected to have significant risks in fact have negligible risks, while the few faults with risks exceeding the assessment criteria were only identified as a result of this study

The Study on Domestic and Foreign Cases for Decommissioning of DPRK Nuclear Facilities

International Nuclear Information System (INIS)

Baek, Ye Ji; Hhu, Joo Youn; Lee, Jung Hyun; Hwang, Yong Soo

2016-01-01

This study was able to analyze domestic and foreign cases, and collect data on the approximate amount of waste and time required time; however, data on applied technology, input manpower, required cost, and waste disposal method was insufficient. DPRK activities such as nuclear weapon development or nuclear testing not only threaten our country's security but also have an adverse effect on nuclear nonproliferation and security in the international society. Therefore, denuclearization of the DPRK is prior task that is essential to peace on the Korean Peninsula. The fundamental purpose of denuclearization of the DPRK is to safely decommission facilities related to developing nuclear weapons and to depose related radioactive waste and nuclear materials. Understanding descriptive references and physical properties of the facility and its purpose important for decommissioning nuclear facilities. Although it was impossible to collect data on DPRK nuclear facilities to perform complete decommissioning, we were able to understand the process used at DPRK nuclear facilities with open source data. This study has been conducted to establish overall measures for decommissioning DPRK nuclear facilities. DPRK nuclear facilities in this study include a IRT- 2000 type nuclear research reactor, a 5 MWe graphite moderated reactor, nuclear fuel fabrication facility, and a nuclear fuel reprocessing facility, which are considered as facilities that produce or manufacture nuclear materials needed for nuclear weapons or related to such activities.

The Study on Domestic and Foreign Cases for Decommissioning of DPRK Nuclear Facilities

Energy Technology Data Exchange (ETDEWEB)

Baek, Ye Ji; Hhu, Joo Youn; Lee, Jung Hyun; Hwang, Yong Soo [Korea Institute of Nuclear Non-proliferation and Control, Daejeon (Korea, Republic of)

2016-05-15

This study was able to analyze domestic and foreign cases, and collect data on the approximate amount of waste and time required time; however, data on applied technology, input manpower, required cost, and waste disposal method was insufficient. DPRK activities such as nuclear weapon development or nuclear testing not only threaten our country's security but also have an adverse effect on nuclear nonproliferation and security in the international society. Therefore, denuclearization of the DPRK is prior task that is essential to peace on the Korean Peninsula. The fundamental purpose of denuclearization of the DPRK is to safely decommission facilities related to developing nuclear weapons and to depose related radioactive waste and nuclear materials. Understanding descriptive references and physical properties of the facility and its purpose important for decommissioning nuclear facilities. Although it was impossible to collect data on DPRK nuclear facilities to perform complete decommissioning, we were able to understand the process used at DPRK nuclear facilities with open source data. This study has been conducted to establish overall measures for decommissioning DPRK nuclear facilities. DPRK nuclear facilities in this study include a IRT- 2000 type nuclear research reactor, a 5 MWe graphite moderated reactor, nuclear fuel fabrication facility, and a nuclear fuel reprocessing facility, which are considered as facilities that produce or manufacture nuclear materials needed for nuclear weapons or related to such activities.

Facilities Management and Value Adding - The LEGO case

DEFF Research Database (Denmark)

Jensen, Per Anker; Katchamart, Akarapong

on the management model for FM included in the European FM standards, recent theories on added value of FM and real estate and the related concept of Value Management from building projects. The paper outlines a preliminary theoretical based management concept, which is investigated, tested and discussed based...... on a case study of LEGO. Results: The study shows that the management model for FM creates a relevant starting point but also that stakeholder and relationship management is an essential aspect of Value Adding Management. The case study confirms the relevance of the basic concept and provides an important...... example of how Value Adding Management can be implemented and added value measured. Practical Implications: The concept of Value Adding Management is expected to increase the awareness of the impacts and strategic importance of FM for organisations and can be a practical tool for facilities managers...

RADON-type disposal facility safety case for the co-ordinated research project on improvement of safety assessment methodologies for near surface radioactive waste disposal facilities (ISAM)

International Nuclear Information System (INIS)

Guskov, A.; Batanjieva, B.; Kozak, M.W.; Torres-Vidal, C.

2002-01-01

The ISAM safety assessment methodology was applied to RADON-type facilities. The assessments conducted through the ISAM project were among the first conducted for these kinds of facilities. These assessments are anticipated to lead to significantly improved levels of safety in countries with such facilities. Experience gained though this RADON-type Safety Case was already used in Russia while developing national regulatory documents. (author)

Case-mix and quality indicators in Chinese elder care homes: are there differences between government-owned and private-sector facilities?

Science.gov (United States)

Liu, Chang; Feng, Zhanlian; Mor, Vincent

2014-02-01

To assess the association between ownership of Chinese elder care facilities and their performance quality and to compare the case-mix profile of residents and facility characteristics in government-owned and private-sector homes. Cross-sectional study. Census of elder care homes surveyed in Nanjing (2009) and Tianjin (2010). Elder care facilities located in urban Nanjing (n = 140, 95% of all) and urban Tianjin (n = 157, 97% of all). A summary case-mix index based on activity of daily living (ADL) limitations and cognitive impairment was created to measure levels of care needs of residents in each facility. Structure, process, and outcome measures were selected to assess facility-level quality of care. A structural quality measure, understaffing relative to resident levels of care needs, which indicates potentially inadequate staffing given resident case-mix, was also developed. Government-owned homes had significantly higher occupancy rates, presumably reflecting popular demand for publicly subsidized beds, but served residents who, on average, have fewer ADL and cognitive functioning limitations than those in private-sector facilities. Across a range of structure, process, and outcome measures of quality, there is no clear evidence suggesting advantages or disadvantages of either ownership type, although when staffing-to-resident ratio is gauged relative to resident case-mix, private-sector facilities were more likely to be understaffed than government-owned facilities. In Nanjing and Tianjin, private-sector homes were more likely to be understaffed, although their residents were sicker and frailer on average than those in government facilities. It is likely that the case-mix differences are the result of selective admission policies that favor healthier residents in government facilities than in private-sector homes. © 2014, Copyright the Authors Journal compilation © 2014, The American Geriatrics Society.

Probabilistic risk assessment for the Los Alamos Meson Physics Facility worst-case design-basis accident

International Nuclear Information System (INIS)

Sharirli, M.; Butner, J.M.; Rand, J.L.; Macek, R.J.; McKinney, S.J.; Roush, M.L.

1992-01-01

This paper presents results from a Los Alamos National Laboratory Engineering and Safety Analysis Group assessment of the worse-case design-basis accident associated with the Clinton P. Anderson Meson Physics Facility (LAMPF)/Weapons Neutron Research (WNR) Facility. The primary goal of the analysis was to quantify the accident sequences that result in personnel radiation exposure in the WNR Experimental Hall following the worst-case design-basis accident, a complete spill of the LAMPF accelerator 1L beam. This study also provides information regarding the roles of hardware systems and operators in these sequences, and insights regarding the areas where improvements can increase facility-operation safety. Results also include confidence ranges to incorporate combined effects of uncertainties in probability estimates and importance measures to determine how variations in individual events affect the frequencies in accident sequences

Survey on evacuation facilities in case of nuclear emergency in Shimane prefecture (Contract research)

International Nuclear Information System (INIS)

Takahara, Shogo; Watanabe, Masatoshi; Oguri, Tomomi; Kimura, Masanori; Hirouchi, Jun; Munakata, Masahiro; Homma, Toshimitsu

2017-02-01

To contribute evaluations of dose reduction effect due to evacuation facilities in case of nuclear emergency, we surveyed on structural and material data on 22 facilities (290 rooms) which are listed in local disaster management plan in Matsue city. These facilities can be divided into three categories in terms of structure, scale and intended purpose of them: educational facilities (12 facilities, 235 rooms (include gymnastic hall)), communal facilities (7 facilities, 42 rooms) and gymnastic hall (3 facilities, 13 rooms). Height and floor-area of rooms, as well as window-area were collected as the structural data. We also collected information on constructional materials (i.e. roof, ceiling, inner wall, outer wall, window, floor), and density of those. In addition, mass-thicknesses of the constructional materials were evaluated based on our surveys, and compared to the previous studies which were made in Japan, U.S., and European countries. Consequently, it was found that there is no significant difference of mass-thickness of constructional materials between the results of our surveys and the previous studies. However, for gymnastic hall, since thin metal plates are used for roofs, we can point out that the mass-thickness of roofs are much lower than those for other concrete facilities and clay tile roofing wooden houses. (author)

Patient-, health worker-, and health facility-level determinants of correct malaria case management at publicly funded health facilities in Malawi: results from a nationally representative health facility survey.

Science.gov (United States)

Steinhardt, Laura C; Chinkhumba, Jobiba; Wolkon, Adam; Luka, Madalitso; Luhanga, Misheck; Sande, John; Oyugi, Jessica; Ali, Doreen; Mathanga, Don; Skarbinski, Jacek

2014-02-20

Prompt and effective case management is needed to reduce malaria morbidity and mortality. However, malaria diagnosis and treatment is a multistep process that remains problematic in many settings, resulting in missed opportunities for effective treatment as well as overtreatment of patients without malaria. Prior to the widespread roll-out of malaria rapid diagnostic tests (RDTs) in late 2011, a national, cross-sectional, complex-sample, health facility survey was conducted in Malawi to assess patient-, health worker-, and health facility-level factors associated with malaria case management quality using multivariate Poisson regression models. Among the 2,019 patients surveyed, 34% had confirmed malaria defined as presence of fever and parasitaemia on a reference blood smear. Sixty-seven per cent of patients with confirmed malaria were correctly prescribed the first-line anti-malarial, with most cases of incorrect treatment due to missed diagnosis; 31% of patients without confirmed malaria were overtreated with an anti-malarial. More than one-quarter of patients were not assessed for fever or history of fever by health workers. The most important determinants of correct malaria case management were patient-level clinical symptoms, such as spontaneous complaint of fever to health workers, which increased both correct treatment and overtreatment by 72 and 210%, respectively (pfacility-level factors were significantly associated with case management quality. Introduction of RDTs holds potential to improve malaria case management in Malawi, but health workers must systematically assess all patients for fever, and then test and treat accordingly, otherwise, malaria control programmes might miss an opportunity to dramatically improve malaria case management, despite better diagnostic tools.

Importance of employee vaccination against influenza in preventing cases in long-term care facilities.

Science.gov (United States)

Wendelboe, Aaron M; Avery, Catherine; Andrade, Bernardo; Baumbach, Joan; Landen, Michael G

2011-10-01

Employees of long-term care facilities (LTCFs) who have contact with residents should be vaccinated against influenza annually to reduce influenza incidence among residents. This investigation estimated the magnitude of the benefit of this recommendation. The New Mexico Department of Health implemented active surveillance in all of its 75 LTCFs during influenza seasons 2006-2007 and 2007-2008. Information about the number of laboratory-confirmed cases of influenza and the proportion vaccinated of both residents and direct-care employees in each facility was collected monthly. LTCFs reporting at least 1 case of influenza (defined alternately by laboratory confirmation or symptoms of influenza-like illness [ILI]) among residents were compared with LTCFs reporting no cases of influenza. Regression modeling was used to obtain adjusted odds ratios (aORs) and 95% confidence intervals (CIs) for the association between employee vaccination coverage and the occurrence of influenza outbreaks. Covariates included vaccination coverage among residents, the staff-to-resident ratio, and the proportion of filled beds. Seventeen influenza outbreaks were reported during this 2-year period of surveillance. Eleven of these were laboratory confirmed (n = 21 residents) and 6 were defined by ILI (n = 40 residents). Mean influenza vaccination coverage among direct-care employees was 51% in facilities reporting outbreaks and 60% in facilities not reporting outbreaks (P = .12). Increased vaccination coverage among direct-care employees was associated with fewer reported outbreaks of laboratory-confirmed influenza (aOR, 0.97 [95% CI, 0.95-0.99]) and ILI (aOR, 0.98 [95% CI, 0.96-1.00]). High vaccination coverage among direct-care employees helps to prevent influenza in LTCFs.

Economic Assessment of Flood Control Facilities under Climate Uncertainty: A Case of Nakdong River, South Korea

Directory of Open Access Journals (Sweden)

Kyeongseok Kim

2018-01-01

Full Text Available Climate change contributes to enhanced flood damage that has been increasing for the last several decades. Understanding climate uncertainties improves adaptation strategies used for investment in flood control facilities. This paper proposes an investment decision framework for one flood zone to cope with future severe climate impacts. This framework can help policy-makers investigate the cost of future damage and conduct an economic assessment using real options under future climate change scenarios. The proposed methodology provides local municipalities with an adaptation strategy for flood control facilities in a flood zone. Using the proposed framework, the flood prevention facilities in the Nakdong River Basin of South Korea was selected as a case study site to analyze the economic assessment of the investments for flood control facilities. Using representative concentration pathway (RCP climate scenarios, the cost of future flood damage to 23 local municipalities was calculated, and investment strategies for adaptation were analyzed. The project option value was determined by executing an option to invest in an expansion that would adapt to floods under climate change. The results of the case study showed that the proposed flood facilities are economically feasible under both scenarios used. The framework is anticipated to present guidance for establishing investment strategies for flood control facilities of a flood zone in multiple municipalities’ settings.

324 Facility special-case waste assessment in support of 324 closure (TPA milestone M-89-05)

International Nuclear Information System (INIS)

Hobart, R.L.

1998-01-01

Hanford Federal Facility Agreement and Consent Order, also known as the Tri-Party Agreement Milestone M-89-05, requires US Department of Energy, Richland Operations Office to complete a 324 Facility Special-Case Waste Assessment in Support of 324 Closure. This document, HNF-1270, has been prepared with the intent of meeting this regulatory commitment. Alternatives for the special-case wastes located in the 324 Building were defined and analyzed. Based on the criteria of safety, environmental, complexity of interfaces, risk, cost, schedule, and long-term operability and maintainability, the best alternative was chosen. Waste packaging and transportation options are also included in the recommendations. The waste disposition recommendations for the B-Cell dispersibles/tank heels and High-Level Vault packaged residuals are to direct them to the Plutonium Uranium Extraction Facility (PUREX) Number 2 storage tunnel

A case series study on the effect of Ebola on facility-based deliveries in rural Liberia.

Science.gov (United States)

Lori, Jody R; Rominski, Sarah Danielson; Perosky, Joseph E; Munro, Michelle L; Williams, Garfee; Bell, Sue Anne; Nyanplu, Aloysius B; Amarah, Patricia N M; Boyd, Carol J

2015-10-12

As communities' fears of Ebola virus disease (EVD) in West Africa exacerbate and their trust in healthcare providers diminishes, EVD has the potential to reverse the recent progress made in promoting facility-based delivery. Using retrospective data from a study focused on maternal and newborn health, this analysis examined the influence of EVD on the use of facility-based maternity care in Bong Country, Liberia, which shares a boarder with Sierra Leone - near the epicenter of the outbreak. Using a case series design, retrospective data from logbooks were collected at 12 study sites in one county. These data were then analyzed to determine women's use of facility-based maternity care between January 2012 and October 2014. The primary outcome was the number of facility-based deliveries over time. The first suspected case of EVD in Bong County was reported on June 30, 2014. Heat maps were generated and the number of deliveries was normalized to the average number of deliveries during the full 12 months before the EVD outbreak (March 2013 - February 2014). Prior to the EVD outbreak, facility-based deliveries steadily increased in Bong County reaching an all-time high of over 500 per month at study sites in the first half of 2014 - indicating Liberia was making inroads in normalizing institutional maternal healthcare. However, as reports of EVD escalated, facility-based deliveries decreased to a low of 113 in August 2014. Ebola virus disease has negatively impacted the use of facility-based maternity services, placing childbearing women at increased risk for morbidity and death.

Cost recovery of NGO primary health care facilities: a case study in Bangladesh

Directory of Open Access Journals (Sweden)

Alam Khurshid

2010-06-01

Full Text Available Abstract Background Little is known about the cost recovery of primary health care facilities in Bangladesh. This study estimated the cost recovery of a primary health care facility run by Building Resources Across Community (BRAC, a large NGO in Bangladesh, for the period of July 2004 - June 2005. This health facility is one of the seven upgraded BRAC facilities providing emergency obstetric care and is typical of the government and private primary health care facilities in Bangladesh. Given the current maternal and child mortality in Bangladesh and the challenges to addressing health-related Millennium Development Goal (MDG targets the financial sustainability of such facilities is crucial. Methods The study was designed as a case study covering a single facility. The methodology was based on the 'ingredient approach' using the allocation techniques by inpatient and outpatient services. Cost recovery of the facility was estimated from the provider's perspective. The value of capital items was annualized using 5% discount rate and its market price of 2004 (replacement value. Sensitivity analysis was done using 3% discount rate. Results The cost recovery ratio of the BRAC primary care facility was 59%, and if excluding all capital costs, it increased to 72%. Of the total costs, 32% was for personnel while drugs absorbed 18%. Capital items were17% of total costs while operational cost absorbed 12%. Three-quarters of the total cost was variable costs. Inpatient services contributed 74% of total revenue in exchange of 10% of total utilization. An average cost per patient was US$ 10 while it was US$ 67 for inpatient and US$ 4 for outpatient. Conclusion The cost recovery of this NGO primary care facility is important for increasing its financial sustainability and decreasing donor dependency, and achieving universal health coverage in a developing country setting. However, for improving the cost recovery of the health facility, it needs to increase

Performance of grid-tied PV facilities: A case study based on real data

International Nuclear Information System (INIS)

Díez-Mediavilla, M.; Dieste-Velasco, M.I.; Rodríguez-Amigo, M.C.; García-Calderón, T.; Alonso-Tristán, C.

2013-01-01

Highlights: • A new procedure to analyse the performance of PV facilities is presented. • It only requires limited amounts of data that are easily sourced. • Data sets on production were collected over two complete years. • The transformerless inverter outperforms the isolated inverter. - Abstract: A new procedure is presented to analyse the performance of grid-tied PV facilities. It needs limited amounts of data that are easily sourced and is based on knowledge of the analysed system and its mode of operation. The procedure is applied, in a case study, to compare real PV production at two 100 kW p grid-connected PV installations. Located in the same geographical region, the installation of these two facilities followed the same construction criteria – PV panels, panel support system and wiring – and the facilities were exposed to the same atmospheric temperature and solar radiation. They differ with regard to their inverter technology: one facility uses an inverter with an integrated transformer system and the other uses a transformerless inverter. The results show that the transformerless inverter system performed better than the isolated system by a factor of 1.2%, which, in economic terms, represents more than 2000 €/year

Special case waste located at Oak Ridge National Laboratory facilities: Survey report

International Nuclear Information System (INIS)

Forgy, J.R. Jr.

1995-11-01

Between October 1994 and October 1995, a data base was established at the Oak Ridge National Laboratory (ORNL) to provide a current inventory of the radioactive waste materials, located at ORNL, for which the US Department of Energy (DOE) has no definite planned disposal alternatives. DOE refers to these waste materials as special case waste. To assist ORNL and DOE management in future planning, an inventory system was established and a baseline inventory prepared. This report provides the background of the ORNL special case waste survey project, as well as special case waste category definitions, both current and anticipated sources and locations of special case waste materials, and the survey and data management processes. Special case waste will be that waste material which, no matter how much practical characterization, treatment, and packaging is made, will never meet the acceptance criteria for permanent disposal at ORNL, and does not meet the criteria at a currently planned off-site permanent disposal facility

Adequacy Post-"Rose v. Council for Better Education" in Kentucky Public School Facilities: A Case Study

Science.gov (United States)

Wilson, Caroline Ford

2013-01-01

The decision in the 1989 landmark Kentucky case, "Rose v. Council for Better Education," initiated many reforms to ensure that children have access to an adequate education, including funding new construction and renovations for school facilities. The purpose of this instrumental, qualitative case study is to describe how the additional…

Quality Assessment of Family Planning Sterilization Services at Health Care Facilities: Case Record Audit.

Science.gov (United States)

Mathur, Medha; Goyal, Ram Chandra; Mathur, Navgeet

2017-05-01

Quality of sterilization services is a matter of concern in India because population control is a necessity. Family Planning Sterilization (FPS) services provided at public health care facilities need to be as per Standard Operating Procedures. To assess the quality of FPS services by audit of case records at selected health care facilities. This cross-sectional study was conducted for two and a half year duration at selected public health care facilities of central India by simple random sampling where FPS services were provided. As per the standards of Government of India, case records were audited and compliance was calculated to assess the quality of services. Results of record audit were satisfactory but important criteria like previous contraceptive history and postoperative counselling were found to be deviated from standards. At Primary Health Centres (PHCs) only 89.5% and at Community Health Centres (CHCs) 58.7% of records were having details of previous contraceptive history. Other criteria like mental illness (only 70% at CHCs) assessment were also inadequate. Although informed consent was found to be having 100% compliance in all records. Quality of care in FPS services is the matter of concern in present scenario for better quality of services. This study may enlighten the policy makers regarding improvements needed for providing quality care.

Accounting for variations in ART program sustainability outcomes in health facilities in Uganda: a comparative case study analysis.

Science.gov (United States)

Zakumumpa, Henry; Bennett, Sara; Ssengooba, Freddie

2016-10-18

Uganda implemented a national ART scale-up program at public and private health facilities between 2004 and 2009. Little is known about how and why some health facilities have sustained ART programs and why others have not sustained these interventions. The objective of the study was to identify facilitators and barriers to the long-term sustainability of ART programs at six health facilities in Uganda which received donor support to commence ART between 2004 and 2009. A case-study approach was adopted. Six health facilities were purposively selected for in-depth study from a national sample of 195 health facilities across Uganda which participated in an earlier study phase. The six health facilities were placed in three categories of sustainability; High Sustainers (2), Low Sustainers (2) and Non- Sustainers (2). Semi-structured interviews with ART Clinic managers (N = 18) were conducted. Questionnaire data were analyzed (N = 12). Document review augmented respondent data. Based on the data generated, across-case comparative analyses were performed. Data were collected between February and June 2015. Several distinguishing features were found between High Sustainers, and Low and Non-Sustainers' ART program characteristics. High Sustainers had larger ART programs with higher staffing and patient volumes, a broader 'menu' of ART services and more stable program leadership compared to the other cases. High Sustainers associated sustained ART programs with multiple funding streams, robust ART program evaluation systems and having internal and external program champions. Low and Non Sustainers reported similar barriers of shortage and attrition of ART-proficient staff, low capacity for ART program reporting, irregular and insufficient supply of ARV drugs and a lack of alignment between ART scale-up and their for-profit orientation in three of the cases. We found that ART program sustainability was embedded in a complex system involving dynamic interactions

Environmental impact assessment for a radioactive waste facility: A case study

International Nuclear Information System (INIS)

Devgun, J.S.

1990-01-01

A 77-ha site, known as the Niagara Falls Storage Site and located in northwestern New York State, holds about 190, 000 m 3 of soils, wastes, and residues contaminated with radium and uranium. The facility is owned by the US Department of Energy. The storage of residues resulting from the processing of uranium ores started in 1944, and by 1950 residues from a number of plants were received at the site. The residues, with a volume of about 18,000 m 3 , account for the bulk of the radioactivity, which is primarily due to Ra-226; because of the extraction of uranium from the ore, the amount of uranium remaining in the residues is quite small. An analysis of the environmental impact assessment and environmental compliance actions taken to date at this site and their effectiveness are discussed. This case study provides an illustrative example of the complexity of technical and nontechnical issues for a large radiative waste facility. 11 refs., 7 figs., 2 tabs

Estimating the cost of referral and willingness to pay for referral to higher-level health facilities: a case series study from an integrated community case management programme in Uganda.

Science.gov (United States)

Nanyonjo, Agnes; Bagorogoza, Benson; Kasteng, Frida; Ayebale, Godfrey; Makumbi, Fredrick; Tomson, Göran; Källander, Karin

2015-08-28

Integrated community case management (iCCM) relies on community health workers (CHWs) managing children with malaria, pneumonia, diarrhoea, and referring children when management is not possible. This study sought to establish the cost per sick child referred to seek care from a higher-level health facility by a CHW and to estimate caregivers' willingness to pay (WTP) for referral. Caregivers of 203 randomly selected children referred to higher-level health facilities by CHWs were interviewed in four Midwestern Uganda districts. Questionnaires and document reviews were used to capture direct, indirect and opportunity costs incurred by caregivers, CHWs and health facilities managing referred children. WTP for referral was assessed through the 'bidding game' approach followed by an open-ended question on maximum WTP. Descriptive analysis was conducted for factors associated with referral completion and WTP using logistic and linear regression methods, respectively. The cost per case referred to higher-level health facilities was computed from a societal perspective. Reasons for referral included having fever with a negative malaria test (46.8%), danger signs (29.6%) and drug shortage (37.4%). Among the referred, less than half completed referral (45.8%). Referral completion was 2.8 times higher among children with danger signs (p = 0.004) relative to those without danger signs, and 0.27 times lower among children who received pre-referral treatment (p average cost per case referred was US$ 4.89 and US$7.35 per case completing referral. For each unit cost per case referred, caregiver out of pocket expenditure contributed 33.7%, caregivers' and CHWs' opportunity costs contributed 29.2% and 5.1% respectively and health facility costs contributed 39.6%. The mean (SD) out of pocket expenditure was US$1.65 (3.25). The mean WTP for referral was US$8.25 (14.70) and was positively associated with having received pre-referral treatment, completing referral and increasing

P.C. disposal decisions: a banking industry case study

Science.gov (United States)

Shah, Sejal P.; Sarkis, Joseph

2002-02-01

The service industry and the manufacturing industry are interlinked in a supply chain situation. Part of the effectiveness of some manufacturing industry environmental performance based on remanufacturing and recycling is dependent on service industry decisions. In the information technology arena, personal computers (PCs) are the hard equipment of the service industry. The end-of-life decisions made by the service industry, and in this case the banking industry will have implications for the amount of systems within the waste or reverse logistics stream for manufacturers. Looking at some of the issues (and presenting a model for evaluation) related to decision making concerning end-of-life disposition for PCs is something this paper investigates. The analytical hierarchy process (AHP) is applied in this circumstance. The development of the model, its application, and results, provide the basis for much of the discussion in this paper.

Los Alamos National Laboratory case studies on decommissioning of research reactors and a small nuclear facility

International Nuclear Information System (INIS)

Salazar, M.D.

1998-01-01

Approximately 200 contaminated surplus structures require decommissioning at Los Alamos National Laboratory. During the last 10 years, 50 of these structures have undergone decommissioning. These facilities vary from experimental research reactors to process/research facilities contaminated with plutonium-enriched uranium, tritium, and high explosives. Three case studies are presented: (1) a filter building contaminated with transuranic radionuclides; (2) a historical water boiler that operated with a uranyl-nitrate solution; and (3) the ultra-high-temperature reactor experiment, which used enriched uranium as fuel

Los Alamos National Laboratory case studies on decommissioning of research reactors and a small nuclear facility

Energy Technology Data Exchange (ETDEWEB)

Salazar, M.D.

1998-12-01

Approximately 200 contaminated surplus structures require decommissioning at Los Alamos National Laboratory. During the last 10 years, 50 of these structures have undergone decommissioning. These facilities vary from experimental research reactors to process/research facilities contaminated with plutonium-enriched uranium, tritium, and high explosives. Three case studies are presented: (1) a filter building contaminated with transuranic radionuclides; (2) a historical water boiler that operated with a uranyl-nitrate solution; and (3) the ultra-high-temperature reactor experiment, which used enriched uranium as fuel.

Case study application of the IAEA safeguards assessment methodology to a mixed oxide fuel fabrication facility

International Nuclear Information System (INIS)

Swartz, J.; McDaniel, T.

1981-01-01

Science Applications, Inc. has prepared a case study illustrating the application of an assessment methodology to an international system for safeguarding mixed oxide (MOX) fuel fabrication facilities. This study is the second in a series of case studies which support an effort by the International Atomic Energy Agency (IAEA) and an international Consultant Group to develop a methodology for assessing the effectiveness of IAEA safeguards. 3 refs

40 CFR 92.504 - Right of entry and access.

Science.gov (United States)

2010-07-01

... manufacturer's or remanufacturer's production line testing or auditing program or any procedure or activity... been, or will be used for production line testing or auditing. (2) By written request, signed by the... Assurance, and served on the manufacturer or remanufacturer, a manufacturer or remanufacturer may be...

Waste Management Facilities Cost Information report for Greater-Than-Class C and DOE equivalent special case waste

Energy Technology Data Exchange (ETDEWEB)

Feizollahi, F.; Shropshire, D.

1993-07-01

This Waste Management Facility Cost Information (WMFCI) report for Greater-Than-Class C low-level waste (GTCC LLW) and DOE equivalent special case waste contains preconceptual designs and planning level life-cycle cost (PLCC) estimates for treatment, storage, and disposal facilities needed for management of GTCC LLW and DOE equivalent waste. The report contains information on 16 facilities (referred to as cost modules). These facilities are treatment facility front-end and back-end support functions (administration support, and receiving, preparation, and shipping cost modules); seven treatment concepts (incineration, metal melting, shredding/compaction, solidification, vitrification, metal sizing and decontamination, and wet/air oxidation cost modules); two storage concepts (enclosed vault and silo); disposal facility front-end functions (disposal receiving and inspection cost module); and four disposal concepts (shallow-land, engineered shallow-land, intermediate depth, and deep geological cost modules). Data in this report allow the user to develop PLCC estimates for various waste management options. A procedure to guide the U.S. Department of Energy (DOE) and its contractor personnel in the use of estimating data is also included in this report.

Waste Management Facilities Cost Information report for Greater-Than-Class C and DOE equivalent special case waste

International Nuclear Information System (INIS)

Feizollahi, F.; Shropshire, D.

1993-07-01

This Waste Management Facility Cost Information (WMFCI) report for Greater-Than-Class C low-level waste (GTCC LLW) and DOE equivalent special case waste contains preconceptual designs and planning level life-cycle cost (PLCC) estimates for treatment, storage, and disposal facilities needed for management of GTCC LLW and DOE equivalent waste. The report contains information on 16 facilities (referred to as cost modules). These facilities are treatment facility front-end and back-end support functions (administration support, and receiving, preparation, and shipping cost modules); seven treatment concepts (incineration, metal melting, shredding/compaction, solidification, vitrification, metal sizing and decontamination, and wet/air oxidation cost modules); two storage concepts (enclosed vault and silo); disposal facility front-end functions (disposal receiving and inspection cost module); and four disposal concepts (shallow-land, engineered shallow-land, intermediate depth, and deep geological cost modules). Data in this report allow the user to develop PLCC estimates for various waste management options. A procedure to guide the U.S. Department of Energy (DOE) and its contractor personnel in the use of estimating data is also included in this report

Radiological assessment and management of radioactive spill in a liquid waste treatment facility - Case study

International Nuclear Information System (INIS)

Amer, H.A.; Shawky, S.; Ibrahiem, N.

2002-01-01

The radiological assessment and management of radioactive spill from liquid waste treatment facility is presented. The incident contaminated the area surrounding the treatment facility with various radionuclides, which were dispersed into the soil. A method based on the European basic safety standards was used to contain the risks associated with the contaminated site. The introduced case study proceeded up to the stage of simplified risk study, since the site is small and it was relatively easy to remove and store the contaminated soil. According to the obtained results, the removal of the upper 30-cm would be considered as appropriate remedying action to resume background level. One of the most important basic concepts of radiation protection in nuclear facilities is the continuity of monitoring radiological release to the environment. It is known that from nuclear facilities only very small amounts of radioactivity are discharged with the liquid effluents and the exhaust air into the environment. Recent studies screening the natural and artificial radionuclide in soil samples from the investigated area revealed normal background concentrations with no anomalies

Determinants of quality of shared sanitation facilities in informal settlements: case study of Kisumu, Kenya

Directory of Open Access Journals (Sweden)

Sheillah Simiyu

2017-01-01

Full Text Available Abstract Background Shared facilities are not recognised as improved sanitation due to challenges of maintenance as they easily can be avenues for the spread of diseases. Thus there is need to evaluate the quality of shared facilities, especially in informal settlements, where they are commonly used. A shared facility can be equated to a common good whose management depends on the users. If users do not work collectively towards keeping the facility clean, it is likely that the quality may depreciate due to lack of maintenance. This study examined the quality of shared sanitation facilities and used the common pool resource (CPR management principles to examine the determinants of shared sanitation quality in the informal settlements of Kisumu, Kenya. Methods Using a multiple case study design, the study employed both quantitative and qualitative methods. In both phases, users of shared sanitation facilities were interviewed, while shared sanitation facilities were inspected. Shared sanitation quality was a score which was the dependent variable in a regression analysis. Interviews during the qualitative stage were aimed at understanding management practices of shared sanitation users. Qualitative data was analysed thematically by following the CPR principles. Results Shared facilities, most of which were dirty, were shared by an average of eight households, and their quality decreased with an increase in the number of households sharing. The effect of numbers on quality is explained by behaviour reflected in the CPR principles, as it was easier to define boundaries of shared facilities when there were fewer users who cooperated towards improving their shared sanitation facility. Other factors, such as defined management systems, cooperation, collective decision making, and social norms, also played a role in influencing the behaviour of users towards keeping shared facilities clean and functional. Conclusion Apart from hardware factors, quality

Device for increasing the safety in the environment of nuclear facilities in case of containment failure

International Nuclear Information System (INIS)

Morlock, G.; Wiesemes, J.; Bachner, D.

1978-01-01

In order to increase the safety in the environment of nuclear facilities, e.g. in case of containment failure, with respect to released radioactive material new or existing facilities are covered with ground. The ground material has got a consistency very much reducing the permeability for liquids and gases. In addition irrigation devices for keeping the ground wet and/or intermediate layers of films pervious to water, e.g. perforated sheets, may be provided. Additionally the ground is protected against frost. Especially suited for ground material is clay. (DG) [de

Improved worst-case and liely accident definition in complex facilities for 40 CFR 68 compliance

International Nuclear Information System (INIS)

O'Kula, K.R., Taylor, Robert P., Jr; Hang, P.

1997-04-01

Many DOE facilities potentially subject to compliance with offsite consequence criteria under the 40 CFR 68 Risk Management Program house significant inventories of toxic and flammable chemicals. The accident progression event tree methodology is suggested as a useful technical basis to define Worst-Case and Alternative Release Scenarios in facilities performing operations beyond simple storage and/or having several barriers between the chemical hazard and the environment. For multiple chemical release scenarios, a chemical mixture methodology should be applied to conservatively define concentration isopleths. In some instances, the region requiring emergency response planning is larger under this approach than if chemicals are treated individually

Adopting and implementing nutrition guidelines in recreational facilities: Public and private sector roles. A multiple case study

Directory of Open Access Journals (Sweden)

Olstad Dana

2012-05-01

Full Text Available Abstract Background Recreational facilities are an important community resource for health promotion because they provide access to affordable physical activities. However, despite their health mandate, many have unhealthy food environments that may paradoxically increase the risk of childhood obesity. The Alberta Nutrition Guidelines for Children and Youth (ANGCY are government-initiated, voluntary guidelines intended to facilitate children’s access to healthy food and beverage choices in schools, childcare and recreational facilities, however few recreational facilities are using them. Methods We used mixed methods within an exploratory multiple case study to examine factors that influenced adoption and implementation of the ANGCY and the nature of the food environment within three cases: an adopter, a semi-adopter and a non-adopter of the ANGCY. Diffusion of Innovations theory provided the theoretical platform for the study. Qualitative data were generated through interviews, observations, and document reviews, and were analysed using directed content analysis. Set theoretic logic was used to identify factors that differentiated adopters from the non-adopter. Quantitative sales data were also collected, and the quality of the food environment was scored using four complementary tools. Results The keys to adoption and implementation of nutrition guidelines in recreational facilities related to the managers’ nutrition-related knowledge, beliefs and perceptions, as these shaped his decisions and actions. The manager, however, could not accomplish adoption and implementation alone. Intersectoral linkages with schools and formal, health promoting partnerships with industry were also important for adoption and implementation to occur. The food environment in facilities that had adopted the ANGCY did not appear to be superior to the food environment in facilities that had not adopted the ANGCY. Conclusions ANGCY uptake may continue to falter

Application of FEPs analysis to identify research priorities relevant to the safety case for an Australian radioactive waste facility

International Nuclear Information System (INIS)

Payne, T.E.; McGlinn, P.J.

2007-01-01

The Australian Nuclear Science and Technology Organisation (ANSTO) has established a project to undertake research relevant to the safety case for the proposed Australian radioactive waste facility. This facility will comprise a store for intermediate level radioactive waste, and either a store or a near-surface repository for low-level waste. In order to identify the research priorities for this project, a structured analysis of the features, events and processes (FEPs) relevant to the performance of the facility was undertaken. This analysis was based on the list of 137 FEPs developed by the IAEA project on 'Safety Assessment Methodologies for Near Surface Disposal Facilities' (ISAM). A number of key research issues were identified, and some factors which differ in significance for the store, compared to the repository concept, were highlighted. For example, FEPs related to long-term groundwater transport of radionuclides are considered to be of less significance for a store than a repository. On the other hand, structural damage from severe weather, accident or human interference is more likely for a store. The FEPs analysis has enabled the scientific research skills required for the inter-disciplinary project team to be specified. The outcomes of the research will eventually be utilised in developing the design, and assessing the performance, of the future facility. It is anticipated that a more detailed application of the FEPs methodology will be undertaken to develop the safety case for the proposed radioactive waste management facility. (authors)

Towards a Unified Environmental Monitoring, Control and Data Management System for Irradiation Facilities: the CERN IRRAD Use Case

CERN Document Server

Gkotse, Blerina; Jouvelot, Pierre; Matli, Emanuele; Pezzullo, Giuseppe; Ravotti, Federico

2017-01-01

The qualification of materials, electronic components and equipment for the CERN High Energy Physics experiments and beyond requires testing against possible radiation effects. These quite complex tests are performed by specialized teams working in irradiation facilities such as IRRAD, the Proton Irradiation Facility at CERN. Building upon the details of the overall irradiation control, monitoring, and logistical systems of IRRAD as a use case, we introduce the motivations for and general architecture of its new data management framework, currently under development at CERN. This infrastructure is intended to allow for the seamless and comprehensive handling of IRRAD irradiation experiments and to help manage all aspects of the facility. Its architecture, currently focused on the specific requirements of the IRRAD facility, is intended to be upgraded to a general framework that could be used in other irradiation facilities within the radiation effects community, as well as for other applications.

The Impact of Carbon Emissions Policies on Reverse Supply Chain Network Design

OpenAIRE

Bandar A. ALKHAYYAL; Surendra M. GUPTA

2018-01-01

Reverse Supply Chain is described as an initiative that plays an important role in the global supply chain for those who seek environmentally responsible solutions for their end-of-life products. The relative economic and environmental benefits of reverse supply chain are influenced by costs and emissions during collection, transportation, recovery facilities, disassembly, recycling, remanufacturing, and disposal of unrecoverable components. The design of reverse supply chain network takes in...

The case for exotic beams at the Holifield Heavy Ion Research Facility

International Nuclear Information System (INIS)

Garrett, J.D.

1991-01-01

The case is presented for modifying the Holifield Heavy Ion Research Facility at Oak Ridge National Laboratory to provide beams of proton-rich exotic isotopes, that do not occur terrestrially. A program of nuclear structure studies for light- and medium-mass, nearly self-conjugate nuclei and for heavy, proton-rich, quasibound nuclei is outlined, as are studies of hydrogen-burning reactions that occur in nucleosynthetic processes. Such a scientific program will provide a unique future for nuclear physics research at ORNL consistent with the long standing tradition of this laboratory

A Regular Production-Remanufacturing Inventory Model for a Two-Echelon System with Price-dependent Return Rate and Environmental Effects Investigation

Science.gov (United States)

Dwicahyani, A. R.; Jauhari, W. A.; Jonrinaldi

2017-06-01

Product take-back recovery has currently became a promising effort for companies in order to create a sustainable supply chain. In addition, some restrictions including government regulations, social-ethical responsibilities, and up to economic factors have contributed to the reasons for the importance of product take-back recovery. This study aims to develop an inventory model in a system of reverse logistic management consisting of a manufacturer and a collector. Recycle dealer collects used products from the market and ships it to manufacturer. Manufacturer then recovers the used products and sell it eventually to the market. Some recovered products that can not be recovered as good as new one will be sold to the secondary market. In this study, we investigate the effects of environmental factors including GHG emissions and energy usage from transportation, regular production, and remanufacturing operations conducted by manufacturer and solve the model to get the maximum annual joint total profit for both parties. The model also considers price-dependent return rate and determine it as a decision variable as well as number of shipments from collector to manufacturer and optimal cycle period. An iterative procedure is proposed to determine the optimal solutions. We present a numerical example to illustrate the application of the model and perform a sensitivity analysis to study the effects of the changes in environmental related costs on the model’s decision.

Reverse logistics strategic antinomies: the case of the automotive sector

Directory of Open Access Journals (Sweden)

Blanas, G.

2012-01-01

Full Text Available Legislation plays a major role in the automobile manufacturing sector. The European legislation has a prominent international role in this respect. We examine the impact of the European Parliament, Council (2000 Directive 2000/53/EC on the EU automobile sector reverse logistics activities in the light of the Extended Producer Responsibility (EPR principle. We argue that there is an antinomy in the application of the Directive that is supposed to support an EPR strategy. The antinomy is expressed by [1] the absence of the necessary capabilities of Producer Responsibility Organizations (PROs to advance to higher reverse logistics activities like remanufacturing [2] an indefinite delay of the possibility for transformation of the current forward chain manufacturing model, [3] a stability in the strategic group formation of the European automobile manufacturing sector that prevents the further diffusion of manufacturing and remanufacturing capabilities within EU with profound positive economic impacts in favour of the industrialized countries with a strong automotive manufacturing sector and negative impacts to less industrialized countries. We also argue that the proper application of the EPR strategy is in favour of established EU manufacturers and can act as a barrier to entry for non-European firms.

Application of Streaming Effect and Joule Heating Effect of Pulse Current in Crack Healing of Metal Materials

Directory of Open Access Journals (Sweden)

Jian Chu

2017-06-01

Full Text Available Remanufacture engineering is an emerging industry that saves resources as well as protects the environment. However, cracks on remanufactured components can result in serious trouble. Therefore, in order to avoid unnecessary waste of resources and energy, these cracks should be repaired radically in order to ensure the smooth progressing of the remanufacturing process. Consequently, the crack healing technique of metal materials is very important in the field of remanufacturing. In this study, the U-shape vane stainless steel of a centrifugal compressor which had cracks was processed by pulse current using a high pulse current discharge device, and the influence of the streaming effect and Joule heating effect of pulse current on the crack healing of metal materials was studied, aiming to provide references for the better application of this technology in the remanufacturing field in the future.

The Case for the Application of Worldwide Marine Radioactivity Studies In the Search for Undeclared Facilities and Activities

Energy Technology Data Exchange (ETDEWEB)

Mark Schanfein

2013-06-01

Undeclared nuclear facilities unequivocally remain the most difficult safeguards challenge facing the International Atomic Energy Agency (IAEA). Recent cases of undeclared facilities revealed in Iran and Syria, which are NPT signatory States, show both the difficulty and the seriousness of this threat to nonproliferation. In the case of undeclared nuclear facilities, the most effective deterrent against proliferation is the application of Wide-Area Environmental Sampling (WAES); however, WAES is currently cost-prohibitive. As with any threat, the most effective countering strategy is a multifaceted approach. Some of the approaches applied by the IAEA include: open source analysis, satellite imagery, on-site environmental sampling, complementary access under the Additional Protocol (where in force), traditional safeguards inspections, and information provided by member States. These approaches, naturally, are focused on specific States. Are there other opportunities not currently within the IAEA purview to assess States that may provide another opportunity to detect clandestine facilities? In this paper, the author will make the case that the IAEA Department of Safeguards should explore the area of worldwide marine radioactivity studies as one possible opportunity. One such study was released by the IAEA Marine Environment Laboratory in January 2005. This technical document focused on 90Sr, 137Cs, and 239/240Pu. It is clearly a challenging area because of the many sources of anthropogenic radionuclides in the world’s oceans and seas including: nuclear weapons testing, reprocessing, accidents, waste dumping, and industrial and medical radioisotopes, whose distributions change based on oceanographic, geochemical, and biological processes, and their sources. It is additionally challenging where multiple States share oceans, seas, and rivers. But with the application of modern science, historical sampling to establish baselines, and a focus on the most relevant

Access over ownership: the case of meeting facilities in Lyngby

DEFF Research Database (Denmark)

Nielsen, Susanne Balslev; Brinkø, Rikke

2016-01-01

research process. The first survey investigates the City of Knowledge’s members attitude towards shared space in general with questions like, what are you most likely to share with others? And what would you like to gain access to? A workshop further explored motivations and practical needs. The second...... positive towards the concept of shared space, but more reluctant about sharing own facilities. A majority of the informants are often using externally owned facilities for meetings and events, and they prefer professional meeting facilities to schools, universities and sports facilities. This point...

Sustainable Facilities Management

DEFF Research Database (Denmark)

Nielsen, Susanne Balslev; Elle, Morten; Hoffmann, Birgitte

2004-01-01

The Danish public housing sector has more than 20 years of experience with sustainable facilities management based on user involvement. The paper outlines this development in a historical perspective and gives an analysis of different approaches to sustainable facilities management. The focus...... is on the housing departments and strateies for the management of the use of resources. The research methods used are case studies based on interviews in addition to literature studies. The paper explores lessons to be learned about sustainable facilities management in general, and points to a need for new...

Predictors of pediatric tuberculosis in public health facilities of Bale zone, Oromia region, Ethiopia: a case control study.

Science.gov (United States)

Gebremichael, Bereket; Abebaw, Tsega-Ab; Moges, Tsedey; Abaerei, Admas Abera; Worede, Nadia

2018-06-04

Tuberculosis is among the top ten cause of death (9th) from a single infectious agent worldwide. It even ranks above HIV/AIDS. It is among the top 10 causes of death among children. Globally there are estimates of one million cases of TB in children, 76% occur in 22 high-burden countries among which Ethiopia ranked 8th. Despite this fact, children with TB are given low priority in most national health programs. Moreover reports on childhood TB and its predictors are very limited. Therefore this study aimed to assess predictors of pediatric Tuberculosis in Public Health Facilities. Unmatched case control study among a total samples of 432 (144 cases and 288 controls) were done from August to December 2016 in Bale zone, South East Ethiopia. Pediatric TB patients who attended health facilities for DOTS and those who attended health facilities providing DOTS service for any health problem except for TB were the study population for cases and controls, respectively. For each case two consecutive controls were sampled systematically. Data were collected using pretested and structured questionnaire through face to face interview with parents. Binary and multivariable logistic regression analyses were employed to identify predictors of Tuberculosis. Among cases there were equal number of male and female 71(50%). However among control 136 (47.9%) were male and the rest were female. The mean (standard deviation) of age among cases was 8.4 (±4.3) and controls were 7.3 (±4.1). The odds of TB were 2 times (AOR, 95% CI = 1.94(1.02-3.77)) more likely among 11-15 age group children when compared with children of age group ≤5. HIV status of the child, children who were fed raw milk and absence of BCG vaccination were the other predictors of pediatric TB with AOR 13.6(3.45-53.69), 4.23(2.26-7.88), and 5.46(1.82-16.32) respectively. Children who were not BCG Vaccinated were at risk of developing TB. Furthermore, HIV status, age of the child and family practice of feeding

Microcomputer simulation model for facility performance assessment: a case study of nuclear spent fuel handling facility operations

International Nuclear Information System (INIS)

Chockie, A.D.; Hostick, C.J.; Otis, P.T.

1985-10-01

A microcomputer based simulation model was recently developed at the Pacific Northwest Laboratory (PNL) to assist in the evaluation of design alternatives for a proposed facility to receive, consolidate and store nuclear spent fuel from US commercial power plants. Previous performance assessments were limited to deterministic calculations and Gantt chart representations of the facility operations. To insure that the design of the facility will be adequate to meet the specified throughput requirements, the simulation model was used to analyze such factors as material flow, equipment capability and the interface between the MRS facility and the nuclear waste transportation system. The simulation analysis model was based on commercially available software and application programs designed to represent the MRS waste handling facility operations. The results of the evaluation were used by the design review team at PNL to identify areas where design modifications should be considered. 4 figs

Compressed Air System Renovation Project Improves Production at a Food Processing Facility: Office of Industrial Technologies (OIT) BestPractices Technical Case Study

International Nuclear Information System (INIS)

Wogsland, J.

2001-01-01

This case study is one in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. This case study documents the activities, savings, and lessons learned on the food processing facility project

HEMS inter-facility transfer: a case-mix analysis.

Science.gov (United States)

Di Rocco, Damien; Pasquier, Mathieu; Albrecht, Eric; Carron, Pierre-Nicolas; Dami, Fabrice

2018-05-16

Helicopter emergency medical services (HEMS) are popular rescue systems despite inconsistent evidence in the scientific literature to support their use for primary interventions, as well as for inter-facility transfer (IFT). There is little research about IFT by HEMS, hence questions remain about the appropriateness of this method of transport. The aim of this study was to describe a case-mix of operational and medical characteristics for IFT activity of a sole HEMS base, and identify indicators of over-triage. This is a retrospective study on HEMS IFT over 36 months, from January 1st 2013 to December 31st 2015. Medical and operational data from the database of the Emergency Department of Lausanne University Hospital, which provides the emergency physicians for this helicopter base, were reviewed. It included distance and time of flight transport, type of care during flight, and estimated distance of transport if conducted by ground. There were 2194 HEMS missions including 979 IFT (44.6%). Most transfers involved adults (> 17 years old; 799 patients, 81.6%). Forty patients (4.1%) were classified as having benefitted from resuscitation or life-saving measures performed in flight, 615 (62.8%) from emergency treatment and 324 (33.1%) from simple clinical examination. The median distance by air between hospitals was 35.4 km. The estimated median distance by road was 47.7 km. The median duration time from origin to destination by air was 12 min. This case-mix of IFTs by HEMS presents a high severity. There are many signs in favour of over-triage. We propose indicators to help choosing whether HEMS is the most appropriate mean of transport to perform the transfer regarding patient condition, geography, and medical competences available aboard ground ambulances; this may reduce over-triage.

Alignment between chronic disease policy and practice: case study at a primary care facility.

Science.gov (United States)

Draper, Claire A; Draper, Catherine E; Bresick, Graham F

2014-01-01

Chronic disease is by far the leading cause of death worldwide and of increasing concern in low- and middle-income countries, including South Africa, where chronic diseases disproportionately affect the poor living in urban settings. The Provincial Government of the Western Cape (PGWC) has prioritized the management of chronic diseases and has developed a policy and framework (Adult Chronic Disease Management Policy 2009) to guide and improve the prevention and management of chronic diseases at a primary care level. The aim of this study is to assess the alignment of current primary care practices with the PGWC Adult Chronic Disease Management policy. One comprehensive primary care facility in a Cape Town health district was used as a case study. Data was collected via semi-structured interviews (n = 10), focus groups (n = 8) and document review. Participants in this study included clinical staff involved in chronic disease management at the facility and at a provincial level. Data previously collected using the Integrated Audit Tool for Chronic Disease Management (part of the PGWC Adult Chronic Disease Management policy) formed the basis of the guide questions used in focus groups and interviews. The results of this research indicate a significant gap between policy and its implementation to improve and support chronic disease management at this primary care facility. A major factor seems to be poor policy knowledge by clinicians, which contributes to an individual rather than a team approach in the management of chronic disease patients. Poor interaction between facility- and community-based services also emerged. A number of factors were identified that seemed to contribute to poor policy implementation, the majority of which were staff related and ultimately resulted in a decrease in the quality of patient care. Chronic disease policy implementation needs to be improved in order to support chronic disease management at this facility. It is possible that similar

Evaluation of case management of uncomplicated malaria in Haiti: a national health facility survey, 2012.

Science.gov (United States)

Landman, Keren Z; Jean, Samuel E; Existe, Alexandre; Akom, Eniko E; Chang, Michelle A; Lemoine, Jean Frantz; Mace, Kimberly E

2015-10-09

Malaria is a public health concern in Haiti, although there are limited data on its burden and case management. National malaria guidelines updated in 2012 recommend treatment with chloroquine and primaquine. In December 2012, a nationally-representative cross-sectional survey of health facilities (HFs) was conducted to determine malaria prevalence among febrile outpatients and malaria case management quality at baseline before scale-up of diagnostics and case management training. Among all 833 HFs nationwide, 30 were selected randomly, in proportion to total HFs per region, for 2-day evaluations. Survey teams inventoried HF material and human resources. Outpatients of all ages were screened for temperature >37.5 °C or history of fever; those without severe symptoms were consented and enrolled. Providers evaluated and treated enrolled patients according to HF standards; the survey teams documented provider-ordered diagnostic tests and treatment decisions. Facility-based test results [microscopy and malaria rapid diagnostic tests (RDTs)] were collected from HF laboratories. Blood smears for gold-standard microscopy, and dried blood spots for polymerase chain reaction (PCR) were obtained. Malaria diagnostic capacity, defined as completing a test for an enrolled patient or having adequate resources for RDTs or microscopy, was present in 11 (37 %) HFs. Among 459 outpatients screened, 257 (56 %) were febrile, of which 193 (75 %) were eligible, and 153 (80 %) were enrolled. Among 39 patients with facility-level malaria test results available on the survey day, 11 (28 %) were positive, of whom 6 (55 %) were treated with an anti-malarial. Twenty-seven (95 %) of the 28 patients testing negative were not treated with an anti-malarial. Of 114 patients without test results available, 35 (31 %) were presumptively treated for malaria. Altogether, 42 patients were treated with an anti-malarial, one (2 %) according to Haiti's 2012 guidelines. Of 140 gold-standard smears, none

Vibro Replacement, Dynamic Compaction, and Vibro Compaction case histories for petroleum storage tank facilities

Energy Technology Data Exchange (ETDEWEB)

Beaton, N; Scott, J. [Geopac West Ltd., Richmond, BC (Canada)

2010-07-01

This paper discussed approaches to tank farm ground improvement via 3 Canadian ground improvement case histories in order to set forth the advantages of ground improvement for foundation support at petroleum storage tank facilities. Each case study featured a particular set of site conditions, performance criteria, and ground improvement techniques selected to attain the desired foundation performance. The first case study involved a Vibro Replacement stone column to meet strict seismicity requirements, the second employed Dynamic Compaction to mitigate deep variable fill within a former gravel pit, and the last encompassed Vibro Compaction applied to a site with a sand fill soil profile. The site conditions, the design requirements, the ground improvement solution, the execution, and the quality control techniques and results were presented for each case history. Soil reinforcement and ground improvement to treat loose and soft soils below heavy storage tanks can be an economical solution to foundation design challenges. However, it is important to select proper methods and tailor the densification programs to the specific subsoil conditions and design requirements. In each application, the selected ground improvement technique exceeded the specified in-situ testing requirements. 3 refs., 9 figs.

Mitigating risks related to facilities management.

Science.gov (United States)

O'Neill, Daniel P; Scarborough, Sydney

2013-07-01

By looking at metrics focusing on the functionality, age, capital investment, transparency, and sustainability (FACTS) of their organizations' facilities, facilities management teams can build potential business cases to justify upgrading the facilities. A FACTS analysis can ensure that capital spent on facilities will produce a higher or more certain ROI than alternatives. A consistent process for managing spending helps to avoid unexpected spikes that cost the enterprise more in the long run.

Beneficial Re-use of Decommissioned Former Nuclear Facilities

International Nuclear Information System (INIS)

Boing, L.E.

1997-01-01

With the decision to decommission a nuclear facility, it is necessary to evaluate whether to fully demolish a facility or to re-use the facility in some capacity. This evaluation is often primarily driven by both the past mission of the site and the facility and the site's perceived future mission. In the case where the facility to be decommissioned is located within a large research or industrial complex and represents a significant resource to the site's future mission, it may be a perfect candidate to be re-used in some fashion. However, if the site is a rather remote older facility with little chance of being modified to today's standards for its re-use, the chances for its re-use will be substantially reduced. In this presentation, some specific cases of former nuclear facilities being decommissioned and re-used will be reviewed and some factors required to be considered in making this decision will be reviewed

Case Studies on Facility Characterization with X-Ray Fluorescence Spectrometry

International Nuclear Information System (INIS)

Kirk, K.T.; Brooksbank, R.D.; Meszaros, J.M.; Towery, W.E.

2008-01-01

A hand-held x-ray fluorescence (XRF) analyzer is being used to characterize facilities in support of demolition activities at the East Tennessee Technology Park (ETTP) in Oak Ridge, Tennessee. Approximately 500 facilities at the U.S. Department of Energy site are being demolished under the ETTP Decontamination and Decommissioning (D and D) project. Facility characterization is being conducted to provide data for waste profiling and identify hazards to demolition workers. XRF spectrometry is a non-destructive analytical technique used to identify and quantify the elemental composition of a substance based on the intensity of its characteristic X-ray emission wavelength or energy. The Innov-X Systems R Model XT-245S XRF analyzer used at ETTP is equipped with a silver anode x-ray tube and a Si PIN diode detector. X-rays are generated by electrical current, eliminating the need for radioactive isotopes. Electronic components can be powered by either a lithium-ion battery or an A/C adapter, and the instrument is controlled by an iPAQ R pocket personal computer. The unit has two primary operating modes. Alloy analysis mode measures percent levels of elements in metals such as a pipes, valves, equipment, or construction materials. Soil mode provides parts-per-million (ppm) quantities in bulk solids like concrete dust, residue, paint chips, or soil. The hand-held unit can analyze material in place, or it can analyze samples in a test stand by remote operation. This paper present some case studies demonstrating a variety of XRF applications for facility characterization: Metal Materials Characterization, Lead Paint Identification, Hot Spot Delineation, Bulk Solids Testing. XRF has been the analytical technique of choice for identifying metal alloy components and has also been useful in analyzing bulk materials. Limitations of XRF testing include the inability to directly analyze elements with low atomic weights. Light elements such as beryllium and aluminum do not emit

Case for one nuclear waste facility

International Nuclear Information System (INIS)

Colgate, S.A.

1979-01-01

There should be only one nuclear waste disposal facility, and that should be located adjacent to the Nevada Test Site where prior experience has demonstrated the relative impervious nature of bomb produced cavities. Federal dedication in perpetuity, security, management, experience, stratigraphy, and land values dictate the location. Proven natural mineral aqueous surface chemistry assures against radioactive migration. An additional level of assurance - stress engineering - a new technology, can be developed to mimic, far exceed, and then be applied retroactively, similar to the same phenomena occurring in underground nuclear explosions

Safety cases for the co-ordinated research project on improvement of safety assessment methodologies for near surface radioactive waste disposal facilities (ISAM)

International Nuclear Information System (INIS)

Kozak, M.W.; Torres-Vidal, C.; Kelly, E.; Guskov, A.; Blerk, J. van

2002-01-01

A Co-ordinated Research Project (CRP) has recently been completed on the Improvement of Safety Assessment Methodologies for Near-Surface Radioactive Waste Disposal Facilities (ISAM). A major aspect of the project was the use of safety cases for the practical application of safety assessment. An overview of the ISAM safety cases is given in this paper. (author)

An analysis of the eco-efficiency of personal computers and mobile phones

NARCIS (Netherlands)

Quariguasi Frota Neto, J.; Bloemhof, J.M.

2012-01-01

Remanufacturing, long perceived as an environmentally friendly initiative, is supported by a number of governments. Yet, the assumption that remanufacturing is desirable to society has never been systematically investigated. In this paper, we examine the effectiveness and eco-efficiency of

Reverse supply chain coordination by revenue sharing contract

DEFF Research Database (Denmark)

Govindan, Kannan; Popiuc, M.N.

2014-01-01

implementation of revenue sharing contract. We define customer willingness to return obsolete units as a function of the discount offered by the retailer in exchange for recycling devices with a remanufacturing value. The results show that performance measures and total supply chain profits improve through......Products that are not recycled at the end of their life increasingly damage the environment. In a collection - remanufacturing scheme, these end-of-life products can generate new profits. Designed on the personal computers industry, this study defines an analytical model used to explore...... the implications of recycling on the reverse supply chain from an efficiency perspective for all participants in the process. The cases considered for analysis are the two- and three-echelon supply chains, where we first look at the decentralized reverse setting followed by the coordinated setting through...

The importance of public sector health facility-level data for monitoring changes in maternal mortality risks among communities: the case of pakistan.

Science.gov (United States)

Jain, Anrudh K; Sathar, Zeba; Salim, Momina; Shah, Zakir Hussain

2013-09-01

This paper illustrates the importance of monitoring health facility-level information to monitor changes in maternal mortality risks. The annual facility-level maternal mortality ratios (MMRs), complications to live births ratios and case fatality ratios (CFRs) were computed from data recorded during 2007 and 2009 in 31 upgraded public sector health facilities across Pakistan. The facility-level MMR declined by about 18%; both the number of Caesarean sections and the episodes of complications as a percentage of live births increased; and CFR based on Caesarean sections and episodes of complications declined by 29% and 37%, respectively. The observed increases in the proportion of women with complications among those who come to these facilities point to a reduction in the delay in reaching facilities (first and second delays; Thaddeus & Maine, 1994); the decrease in CFRs points to improvements in treating obstetric complications and a reduction in the delay in receiving treatment once at facilities (the third delay). These findings point to a decline in maternal mortality risks among communities served by these facilities. A system of woman-level data collection instituted at health facilities with comprehensive emergency obstetric care is essential to monitor changes in the effects of any reduction in the three delays and any improvement in quality of care or the effectiveness of treating pregnancy-related complications among women reaching these facilities. Such a system of information gathering at these health facilities would also help policymakers and programme mangers to measure and improve the effectiveness of safe-motherhood initiatives and to monitor progress being made toward achieving the fifth Millennium Development Goal.

Cost recovery of NGO primary health care facilities: a case study in Bangladesh

OpenAIRE

Alam, Khurshid; Ahmed, Shakil

2010-01-01

Abstract Background Little is known about the cost recovery of primary health care facilities in Bangladesh. This study estimated the cost recovery of a primary health care facility run by Building Resources Across Community (BRAC), a large NGO in Bangladesh, for the period of July 2004 - June 2005. This health facility is one of the seven upgraded BRAC facilities providing emergency obstetric care and is typical of the government and private primary health care facilities in Bangladesh. Give...

Descriptive analysis of measles cases seen in a tertiary health facility in Sokoto, Northwest Nigeria – implication of disease eradication

Directory of Open Access Journals (Sweden)

Mohammed Yahaya

2017-01-01

Full Text Available Introduction Measles is a vaccine preventable viral disease that affects mostly children under-five years of age. It is highly contagious infection associated with high morbidity and mortality. Objective To describe the morbidity and mortality pattern of measles cases in person, place and time. Methods A health facility based study and cross sectional descriptive study design was used. All cases of measles that presented at the facility from January to June 2016 were profiled and their medical records reviewed. Representative blood samples were taken and analyzed using the Enzyme linked immunosorbent assay (ELISA method for the diagnosis of measles. Data was entered into MS Excel version 2016 and later analysed using Epi-info version 7. Results A total of 149 patients were seen over a period of 6 months. They represent 88 males and 61 females with a male to female ratio of 2:1. The median age of the cases was 30 months (range of 108 months to 9 month. The trend analysis shows a steady increased in number of cases from January with the month of March having the highest number of 46 cases, then there was steady decline for the subsequent months. Only 14 children, which accounted for 9.4% were reported to have being vaccinated against measles, while majority, 135 that represented 90.6% were not. Seven deaths were recorded; all were males and among cases that never received vaccine against measles, giving Case fatality rate (CFR of 5.0%. Measles specific immunoglobulin M (IgM was detected in all the blood samples that were sent for investigations. Conclusion Nearly all the cases did not receive measles vaccine and among the deaths recorded, none had been vaccinated against measles. Concerted efforts are required by all stakeholders to ensure every child is completely immunized in line with the global measles elimination strategy.

ORNL results for Test Case 1 of the International Atomic Energy Agency's research program on the safety assessment of Near-Surface Radioactive Waste Disposal Facilities

International Nuclear Information System (INIS)

Thorne, D.J.; McDowell-Boyer, L.M.; Kocher, D.C.; Little, C.A.; Roemer, E.K.

1993-01-01

The International Atomic Energy Agency (IAEA) started the Coordinated Research Program entitled '''The Safety Assessment of Near-Surface Radioactive Waste Disposal Facilities.'' The program is aimed at improving the confidence in the modeling results for safety assessments of waste disposal facilities. The program has been given the acronym NSARS (Near-Surface Radioactive Waste Disposal Safety Assessment Reliability Study) for ease of reference. The purpose of this report is to present the ORNL modeling results for the first test case (i.e., Test Case 1) of the IAEA NSARS program. Test Case 1 is based on near-surface disposal of radionuclides that are subsequently leached to a saturated-sand aquifer. Exposure to radionuclides results from use of a well screened in the aquifer and from intrusion into the repository. Two repository concepts were defined in Test Case 1: a simple earth trench and an engineered vault

Woman Friendly Mosque, Features and Facilities: A Case Study on Masjid Sultan Ibrahim, Universiti Tun Hussein Onn Malaysia

Science.gov (United States)

Suratkon, A.; Salam, N. N. Abd; Rahmat, M. H.; Arhan, A. S. Mohd; Wahab, I. Abd; Ghaffar, S. A.

2017-12-01

Mosque has gone through a long and complex development throughout the Muslim’s history which involved the interrelation between its functions and its design. During the process, many aspects of its design were reconfigured including the female facilities in the mosque. In Malaysia, there is a progressive movement to transform the roles and functions of the mosque from exclusive place for prayers and seclusion to a community center. Nevertheless, there are still a numbers of muslim women voices their frustration towards the facilities provided to them in the mosque. Indirectly, this has discourage participation of women in the mosque. The objective of this paper is to investigate the opinions and needs of muslim women in a mosque and to propose appropriate features and facilities for a female-friendly mosque. The study explored through a field observation and a set of questionnaires, which involves a case study of Masjid Sultan Ibrahim in Universiti Tun Hussein Onn Malaysia. The field observation was carried out to analyze its current conditions, facilities, design and features. On the other hand, a set of questionnaire was distributed to the women visitors who were mainly students and staffs as to get their insight on this issue. From the field observation and the survey distributed, it was clearly seen that the facilities provided for the female users were still not up to the standard of a ‘women-friendly mosque’. Some proposals were provided to improve on the current condition and to be taken into consideration by future designers in designing a mosque.

Competitive closed-loop supply chain network design with price-dependent demands

DEFF Research Database (Denmark)

Rezapour, Shabnam; Farahani, Reza Zanjirani; Fahimnia, Behnam

2015-01-01

Abstract This paper presents a bi-level model for the strategic reverse network design (upper level) and tactical/operational planning (lower level) of a closed-loop single-period supply chain operating in a competitive environment with price-dependent market demand. An existing supply chain (SC...... for the supply of new and remanufactured products. The performance behaviors of both SCs are evaluated with specific focus placed on investigating the impacts of the strategic facility location decisions of the new SC on the tactical/operational transport and inventory decisions of the overall network. The bi...

Investigation on candidates of principal facilities for exposure dose to public for the facilities using nuclear material

International Nuclear Information System (INIS)

Shimazaki, Yosuke; Sawahata, Hiroaki; Takada, Shoji; Fujimoto, Nozomu

2015-01-01

HTTR holds the nuclear fuel material use facilities in its reactor facilities, for the purpose of study on the fracture behavior of fuel and release behavior of fission products, development of high-performance fuel, and measurement of neutron flux. Due to the revision of the 'Act on the regulation of nuclear source material, nuclear fuel material and reactor', the facilities having the 'Important safety-related facilities' among the facilities applicable to the Enforcement Ordinance Article 41 (Article 41 facilities) has come to need to conform to the 'Regulations concerning standards for the location, structure, and equipment of used facilities and others'. In this case, actions such as modification by all possible means are required. The nuclear fuel substance use facilities of HTTR correspond to Article 41 facilities. So, whether it is a candidate for the 'Important safety-related facilities' has been examined. As a result, it is confirmed that the facilities are not correspond to the 'Important safety-related facilities', and it has been concluded that modification measures for the purpose of conforming to this approval standard rule are not necessary as of the present. (A.O.)

Bidding strategy for an energy storage facility

DEFF Research Database (Denmark)

Nasrolahpour, Ehsan; Zareipour, Hamidreza; Rosehart, William D.

2016-01-01

to maximize its profit, while the market operator aims at maximizing the social welfare. In this case, the storage facility adapts its strategic behavior to take advantage of market conditions. To model the imperfectly competitive market, a bi-level optimization model is implemented to present......This paper studies operation decisions of energy storage facilities in perfectly and imperfectly competitive markets. In a perfectly competitive market, the storage facility is operated to maximize the social welfare. However, in a imperfectly competitive market, the storage facility operates...

The estimation of N2O emissions from municipal solid waste incineration facilities: The Korea case

International Nuclear Information System (INIS)

Park, Sangwon; Choi, Jun-Ho; Park, Jinwon

2011-01-01

The greenhouse gases (GHGs) generated in municipal solid waste (MSW) incineration are carbon dioxide (CO 2 ), methane (CH 4 ), and nitrous oxide (N 2 O). In South Korea case, the total of GHGs from the waste incineration facilities has been increasing at an annual rate 10%. In these view, waste incineration facilities should consider to reduce GHG emissions. This study is designed to estimate the N 2 O emission factors from MSW incineration plants, and calculate the N 2 O emissions based on these factors. The three MSW incinerators examined in this study were either stoker or both stoker and rotary kiln facilities. The N 2 O concentrations from the MSW incinerators were measured using gas chromatography-electron capture detection (GC-ECD) equipment. The average of the N 2 O emission factors for the M01 plant, M02 plant, and M03 plant are 71, 75, and 153 g-N 2 O/ton-waste, respectively. These results showed a significant difference from the default values of the intergovernmental panel on climate change (IPCC), while approaching those values derived in Japan and Germany. Furthermore, comparing the results of this study to the Korea Energy Economics Institute (KEEI) (2007) data on waste incineration, N 2 O emissions from MSW incineration comprised 19% of the total N 2 O emissions.

The estimation of N2O emissions from municipal solid waste incineration facilities: The Korea case.

Science.gov (United States)

Park, Sangwon; Choi, Jun-Ho; Park, Jinwon

2011-08-01

The greenhouse gases (GHGs) generated in municipal solid waste (MSW) incineration are carbon dioxide (CO(2)), methane (CH(4)), and nitrous oxide (N(2)O). In South Korea case, the total of GHGs from the waste incineration facilities has been increasing at an annual rate 10%. In these view, waste incineration facilities should consider to reduce GHG emissions. This study is designed to estimate the N(2)O emission factors from MSW incineration plants, and calculate the N(2)O emissions based on these factors. The three MSW incinerators examined in this study were either stoker or both stoker and rotary kiln facilities. The N(2)O concentrations from the MSW incinerators were measured using gas chromatography-electron capture detection (GC-ECD) equipment. The average of the N(2)O emission factors for the M01 plant, M02 plant, and M03 plant are 71, 75, and 153g-N(2)O/ton-waste, respectively. These results showed a significant difference from the default values of the intergovernmental panel on climate change (IPCC), while approaching those values derived in Japan and Germany. Furthermore, comparing the results of this study to the Korea Energy Economics Institute (KEEI) (2007) data on waste incineration, N(2)O emissions from MSW incineration comprised 19% of the total N(2)O emissions. Crown Copyright © 2011. Published by Elsevier Ltd. All rights reserved.

Indústria de cartucho de toner sob a ótica da remanufatura: estudo de caso de um processo de melhoria Remanufacturing of toner cartridge: a case study of a improvement process

Directory of Open Access Journals (Sweden)

Cícero Ferreira Fernandes Costa Filho

2006-04-01

Full Text Available Este trabalho apresenta um estudo de caso de um processo de melhoria aplicado a uma indústria de remanufatura de cartuchos de toner. Inicialmente, é feita uma abordagem do processo de remanufatura procurando salientar as principais características que o diferenciam de um processo de manufatura convencional e a importância do mesmo diante das preocupações ambientais atuais. Através de três indicadores de desempenho propostos no trabalho fez-se um diagnóstico do processo de remanufatura quanto ao aproveitamento de peças recolhidas do campo, atendimento de pedidos dos clientes e quantidade de defeitos. No diagnóstico inicial realizado, os valores obtidos para esses critérios situaram-se abaixo das metas estabelecidas na empresa. Através da metodologia PDCA, identificaram-se oportunidades de melhorias em pontos críticos do processo de fabricação. A implantação dessas melhorias resultou em ganhos nos indicadores de desempenho da ordem de 12%. Algumas ferramentas clássicas foram utilizadas para auxiliar na implementação da metodologia PDCA destacando-se brainstorming, diagrama de Ishikawa e Controle Estatístico de Processo.This paper presents an improvement process applied in one remanufacturing toner cartridge industry. It, initially, presents a mapping of the stages of this process by attempting to highlight the main characteristics, which distinguish it from a conventional manufacturing process and emphasizes its importance as an of eco-efficient process aiming at achieving sustainable development. Through three performance indicators proposed by the work, a diagnosis of the existing process was carried out as to the reuse of parts gasthered in the field, fulfilment of customers'orders and quantity of production faults. At the initial diagnosis carried out, the values obtained for theses criteria were located below the established targets proposed by the company. Through the PDCA tool, improvement opportunities in critical

Facilities Management Service Delivery in Public and Private High Rise Residential Buildings in Nigeria: A case study of Eko Court Complex and Niger Towers

Directory of Open Access Journals (Sweden)

Olanrele O. O.

2014-01-01

Full Text Available This study assessed and compared the delivery of Facilities Management (FM services in public and private high rise residential buildings in Lagos, Nigeria. While some facilities or services may not be available in some public estates, the efficiency of the available ones is inadequate in comparison with the adequacy and efficiency of services provided in private estates. The objectives set for the study include identification of services that are provided in the case studies, service delivery method, and an assessment of the residents’ satisfaction of the services. This study adopted questionnaire survey for collection of data. 127 questionnaires were distributed to the residents of the case studies and 93 were returned. Three of which were discarded for incompleteness, thus 90 were analysed. The study found that most but not all of the facilities services expected in high rise buildings are available in the case studies and the services are outsourced under a standard Service Level Agreement. The service delivery in private high rise residential building is better than the public residential high rise buildings as revealed by the study. The study recommends improved standardization of services, customized services and meeting customer’s expectation for improved service delivery.

Implementing an Open Source Electronic Health Record System in Kenyan Health Care Facilities: Case Study.

Science.gov (United States)

Muinga, Naomi; Magare, Steve; Monda, Jonathan; Kamau, Onesmus; Houston, Stuart; Fraser, Hamish; Powell, John; English, Mike; Paton, Chris

2018-04-18

The Kenyan government, working with international partners and local organizations, has developed an eHealth strategy, specified standards, and guidelines for electronic health record adoption in public hospitals and implemented two major health information technology projects: District Health Information Software Version 2, for collating national health care indicators and a rollout of the KenyaEMR and International Quality Care Health Management Information Systems, for managing 600 HIV clinics across the country. Following these projects, a modified version of the Open Medical Record System electronic health record was specified and developed to fulfill the clinical and administrative requirements of health care facilities operated by devolved counties in Kenya and to automate the process of collating health care indicators and entering them into the District Health Information Software Version 2 system. We aimed to present a descriptive case study of the implementation of an open source electronic health record system in public health care facilities in Kenya. We conducted a landscape review of existing literature concerning eHealth policies and electronic health record development in Kenya. Following initial discussions with the Ministry of Health, the World Health Organization, and implementing partners, we conducted a series of visits to implementing sites to conduct semistructured individual interviews and group discussions with stakeholders to produce a historical case study of the implementation. This case study describes how consultants based in Kenya, working with developers in India and project stakeholders, implemented the new system into several public hospitals in a county in rural Kenya. The implementation process included upgrading the hospital information technology infrastructure, training users, and attempting to garner administrative and clinical buy-in for adoption of the system. The initial deployment was ultimately scaled back due to a

Conceptual designs of near surface disposal facility for radioactive waste arising from the facilities using radioisotopes and research facilities for nuclear energy development and utilization

International Nuclear Information System (INIS)

Sakai, Akihiro; Yoshimori, Michiro; Okoshi, Minoru; Yamamoto, Tadatoshi; Abe, Masayoshi

2001-03-01

Various kinds of radioactive waste is generating from the utilization of radioisotopes in the field of science, technology, etc. and the utilization and development of nuclear energy. In order to promote the utilization of radionuclides and the research activities, it is necessary to treat and dispose of radioactive waste safely and economically. Japan Nuclear Cycle Development Institute (JNC), Japan Radioisotope Association (JRIA) and Japan Atomic Energy Research Institute (JAERI), which are the major waste generators in Japan in these fields, are promoting the technical investigations for treatment and disposal of the radioactive waste co-operately. Conceptual design of disposal facility is necessary to demonstrate the feasibility of waste disposal business and to determine the some conditions such as the area size of the disposal facility. Three institutes share the works to design disposal facility. Based on our research activities and experiences of waste disposal, JAERI implemented the designing of near surface disposal facilities, namely, simple earthen trench and concrete vaults. The designing was performed based on the following three assumed site conditions to cover the future site conditions: (1) Case 1 - Inland area with low groundwater level, (2) Case 2 - Inland area with high groundwater level, (3) Case 3 - Coastal area. The estimation of construction costs and the safety analysis were also performed based on the designing of facilities. The safety assessment results show that the safety for concrete vault type repository is ensured by adding low permeability soil layer, i.e. mixture of soil and bentonite, surrounding the vaults not depending on the site conditions. The safety assessment results for simple earthen trench also show that their safety is ensured not depending on the site conditions, if they are constructed above groundwater levels. The construction costs largely depend on the depth for excavation to build the repositories. (author)

Comparison of a Commonwealth-initiated regional radiation oncology facility in Toowoomba with a Queensland Health facility

International Nuclear Information System (INIS)

Poulsen, M.; Ramsay, R.; Gogna, K.; Middleton, M.; Martin, J.; Khoo, E.; Wong, W.; McQuitty, S.; Walpole, E.; Fairweather, R.

2010-01-01

The aim was to compare a private Commonwealth-initiated regional radiation oncology facility in Toowoomba with a Queensland Health facility (QHF) in Brisbane. The comparison concentrated on staffing, case mix and operational budgets, but was not able to look at changes in access to services. Data were collected from the two facilities from January 2008 to June 2008 inclusive. A number of factors were compared, including case mix, staffing levels, delay times for treatment, research, training and treatment costs. The case mix between the two areas was similar with curative treatments making up just over half the work load in both centres and two-thirds the work being made up of cancers of breast and prostate. Staffing levels were leaner in Toowoomba, especially in the areas of nursing, administration and trial coordinators. Research activity was slightly higher in Toowoomba. The average medicare cost per treatment course was similar in both centres ($5000 per course). Total costs of an average treatment including patient, State and Commonwealth costs, showed a 30% difference in costing favouring Toowoomba. This regional radiation oncology centre has provided state-of-the-art cancer care that is close to home for patients living in the Darling Downs region. Both public and private patients have been treated with modest costs to the patient and significant savings to QH. The case mix is similar to the QHF, and there has been significant activity in clinical research. A paperless working environment is one factor that has allowed staffing levels to be reduced. Ongoing support from Governments are required if private facilities are to participate in important ongoing staff training.

Marketing Sports Facilities: Perspectives from Botswana

Science.gov (United States)

Bohutsana, Basuti; Akpata, Dele

2013-01-01

The provision of sports facilities contributes immensely to the growth of sports and leisure activities in the countries where they are provided. In some countries, as was the case in Botswana, the government had to spend millions of dollars to provide new Integrated Sports Facilities (ISF's) as a panacea for the continued poor performance of its…

40 CFR 92.1108 - In-use compliance provisions.

Science.gov (United States)

2010-07-01

... such cost obligation from a manufacturer or remanufacturer to a dealer through franchise or other... respecting the cost or value of emission control devices or systems, the manufacturer or remanufacturer shall set forth in the statement the cost or value attributed to these devices or systems by the Secretary...

Environmental safety case and cement-related issues for intermediate-level waste in a co-located geological disposal facility

International Nuclear Information System (INIS)

Norris, Simon; Williams, Steve

2012-01-01

Simon Norris of the NDA described safety case and cement-related issues for a geological disposal facility for ILW. The Environmental Safety Case (ESC) needs to demonstrate a clear understanding of: - The disposal facility in its geological setting. - How the disposal system will evolve. - How the various components of system (including cementitious materials) contribute to meeting the requirement of providing a safe long-term solution for the disposed wastes. The ESC must include and support the key environmental safety arguments with underpinning lines of reasoning and detailed analysis, assessments and supporting evidence (including those relating to cementitious materials). In an ILW disposal system, cementitious materials could be used in several ways: - As in-package grouting materials and package materials. - Backfill material. - Shotcrete and other vault lining technologies that could be employed during construction and operation. - Engineered seals. - Structural materials. Given that cementitious materials will play important roles in the disposal system - and within a general strategy for managing uncertainty - the NDA is conducting, or has recently conducted, research into the following topics: - Assessment of the potential for interactions between disposal modules for low- and intermediate-level wastes and for HLW and spent fuel. - The effect of possible cementitious vault liners (e.g. composed from shotcrete) on the early post-closure evolution of waste-derived gas in a geological disposal facility for low- and intermediate-level wastes. - The evolution of cementitious backfill materials, including cracking, and related evolution of groundwater flow and chemistry in the vault environment of a geological disposal facility. - Evidence from nature and archaeology relevant to the long-term properties of cement. - Interaction of waste-derived gas (particularly carbon-14 bearing gas) with cementitious materials in the facility near-field. - The choice of in

Different Subsidies’ Impact on equilibrium decision-making of closed-loop supply chain

Directory of Open Access Journals (Sweden)

Liurui Deng

2014-10-01

Full Text Available Purpose: An electronic product recycling not only needs the waste treatment company, but also involves recycler and remanufacturer. It is significance for increasing subsidy modes and promoting waste recycling to research the effect of government subsidies for recycler and remanufacturer on the equilibrium of closed-loop supply chain. Approach: In view of service competition, we build a Stackelberg model which contains an original manufacturer, a recycler and remanufacturer and further obtain the equilibrium decision of closed-loop supply chain. Based on this strategy model, we analyze how two different subsidies to utilization rate of raw materials, the service level and the demand of product affect on the terminal decision. Findings: We compared the two different subsidy ways in closed-loop supply chain. Subsidy to utilization rate of raw materials has no effect on the whole market demand for electronic product; and subsidy on utilization rate of raw materials has no effect on the whole market demand for electronic product. Research implications: Under the conditions in which government can observe the information of raw material utility and remanufacturing service level, if government decides to expand the market size, it could subsidize remanufacturer for different service level; Under the conditions in which government can observe the information of raw material utility and remanufacturing service level, if government want to improve utilization rate of raw materials, stimulate sustainable development of industries of electronic product, it can subsidizes recycler based on different utilization rate of raw materials. Value: We analyzed the closed-loop supply chain equilibrium, compared the effects on it under different subsidy mechanism and offered some advises in order to provide scientific support to promote electronic products recycling.

Quality of antenatal care service provision in health facilities across sub-Saharan Africa: Evidence from nationally representative health facility assessments.

Science.gov (United States)

Kanyangarara, Mufaro; Munos, Melinda K; Walker, Neff

2017-12-01

Utilization of antenatal care (ANC) services has increased over the past two decades. Continued gains in maternal and newborn health will require an understanding of both access and quality of ANC services. We linked health facility and household survey data to examine the quality of service provision for five ANC interventions across health facilities in sub-Saharan Africa. Using data from 20 nationally representative health facility assessments - the Service Provision Assessment (SPA) and the Service Availability and Readiness Assessment (SARA), we estimated facility level readiness to deliver five ANC interventions: tetanus toxoid vaccine for pregnant women, intermittent preventive treatment for malaria in pregnancy (IPTp), syphilis detection and treatment in pregnancy, iron supplementation and hypertensive disease case management. Facility level indicators were stratified by health facility type, managing authority and location, then linked to estimates of ANC utilization in that stratum from the corresponding Demographic and Health Surveys (DHS) to generate population level estimates of the 'likelihood of appropriate care'. Finally, the association between estimates of the 'likelihood of appropriate care' from the linking approach and estimates of coverage levels from the DHS were assessed. A total of 10 534 health facilities were surveyed in the 20 health facility assessments, of which 8742 reported offering ANC services and were included in the analysis. Health facility readiness to deliver IPTp, iron supplementation, and tetanus toxoid vaccination was higher (median: 84.1%, 84.9% and 82.8% respectively) than readiness to deliver hypertensive disease case management and syphilis detection and treatment (median: 23.0% and 19.9% respectively). Coverage of at least 4 ANC visits ranged from 24.8% to 75.8%. Estimates of the likelihood of appropriate care derived from linking health facility and household survey data showed marked gaps for all interventions

Safety cases for radioactive waste disposal facilities: guidance on confidence building and regulatory review IAEA-ASAM co-ordinated research project

International Nuclear Information System (INIS)

Ben Belfadhel, M.; Bennett, D.G.; Metcalf, P.; Nys, V.; Goldammer, W.

2008-01-01

The IAEA has been conducting two co-ordinated research programmes (CRPs) projects to develop and apply improved safety assessment methodologies for near-surface radioactive waste disposal facilities. The more recent of these projects, ASAM (application of safety assessment methodologies), included a Regulatory Review Working Group (RRWG) which has been working to develop guidance on how to gain confidence in safety assessments and safety cases, and on how to conduct regulatory reviews of safety assessments. This paper provides an overview of the ASAM project, focusing on the safety case and regulatory review. (authors)

Decommissioning of a nuclear facility: the Brazilian case

International Nuclear Information System (INIS)

Menezes, Regina M.; Deppe, Alzira L.; Nunes, Marcos E.C.; Cardoso, Eliezer M.; Nouailhetas, Y.; Mouco, Charles; Ferreira, Paulo R.; Matta, Luiz E.da

1996-01-01

The first decommissioning process of a nuclear facility in Brazil, has being taken place in Usina de Santo Amaro (USAM), located in Sao Paulo whose physical and chemical milling activities of the monazitic sands were interrupted in June 1992. Nowadays, materials and equipment generated from Minerals Physical Treatment and Rare Earths Separation Sectors, classified as low level radiation areas, are in final phase of dismantling, monitoring and release to the internal backyard of the facility or segregation in controlled areas. This decommissioning phase is considered as pilot for the verification of procedures, follow up of pieces and application of suitable radioprotection measures for the future dismantling of the Chemical Treatment of Monazite Sector, which will involve higher risks regarding radioprotection and safety aspects. The criteria of discharge of areas and equipment established by CNEN are conservative enough to assure that the contamination is not released to the environment. CNEN's activities conducted at the surveillance of works involving the dismantling and decontamination of materials and equipment verifying that they are in accordance with the requirements established by the Brazilian Commission of Nuclear Energy. (author)

Proton facility economics: the importance of "simple" treatments.

Science.gov (United States)

Johnstone, Peter A S; Kerstiens, John; Richard, Helsper

2012-08-01

Given the cost and debt incurred to build a modern proton facility, impetus exists to minimize treatment of patients with complex setups because of their slower throughput. The aim of this study was to determine how many "simple" cases are necessary given different patient loads simply to recoup construction costs and debt service, without beginning to cover salaries, utilities, beam costs, and so on. Simple cases are ones that can be performed quickly because of an easy setup for the patient or because the patient is to receive treatment to just one or two fields. A "standard" construction cost and debt for 1, 3, and 4 gantry facilities were calculated from public documents of facilities built in the United States, with 100% of the construction funded through standard 15-year financing at 5% interest. Clinical best case (that each room was completely scheduled with patients over a 14-hour workday) was assumed, and a statistical analysis was modeled with debt, case mix, and payer mix moving independently. Treatment times and reimbursement data from the investigators' facility for varying complexities of patients were extrapolated for varying numbers treated daily. Revenue assumptions of $X per treatment were assumed both for pediatric cases (a mix of Medicaid and private payer) and state Medicare simple case rates. Private payer reimbursement averages $1.75X per treatment. The number of simple patients required daily to cover construction and debt service costs was then derived. A single gantry treating only complex or pediatric patients would need to apply 85% of its treatment slots simply to service debt. However, that same room could cover its debt treating 4 hours of simple patients, thus opening more slots for complex and pediatric patients. A 3-gantry facility treating only complex and pediatric cases would not have enough treatment slots to recoup construction and debt service costs at all. For a 4-gantry center, focusing on complex and pediatric cases alone

The solution of location problems with certain existing facility structures

DEFF Research Database (Denmark)

Juel, Henrik; Love, Robert F.

1983-01-01

It is known that in the Euclidean distance case, the optimal minisum location of a new facility in relation to four existing facilities is at the intersection of the two lines joining two pairs of the facilities. The authors extend this concept to minisum problems having any even number of existing...... facilities and characterized by generalized distance norms...

Engineering Greener Processes--Laser Cutter Transforms Printing Waste

Science.gov (United States)

Xu, Renmei; Flowers, Jim

2011-01-01

Many of today's students have embraced an environmental ethic and are motivated by efforts to reduce waste or to remanufacture waste into viable products. In-class efforts to reuse and remanufacture waste can be especially motivating. They can also help students develop a better understanding of life-cycle analysis, waste-stream management,…

Assessing reported cases of sexual and gender-based violence, causes and preventive strategies, in European asylum reception facilities.

Science.gov (United States)

Oliveira, Charlotte; Keygnaert, Ines; Oliveira Martins, Maria do Rosário; Dias, Sónia

2018-05-09

Sexual and gender-based violence (SGBV) is a widespread public health problem and a violation of human rights rooted in gender and power inequities. Refugees, asylum-seekers and migrants living in European asylum reception facilities (EARF) are especially vulnerable to SGBV. To contribute to closing the gap on systematic and accurate evidence on SGBV, we aim to explore reported cases of SGBV, causes and preventable measures described by residents and professionals from EARF. We developed a cross-sectional study using the Senperforto project database. Semi-structured interviews were conducted with residents (refugees, asylum-seekers and unaccompanied minors) and professionals (service and health care providers) at EARF, in 7 European countries. We used IBM® SPSS software to analyze our data. Further, statistical tests - Chi-square Test and Fisher's exact test (5% significance level) were conducted. In total 562 respondents: 375 residents (R) and 187 professionals (P) participated in the study. The majority of respondents were male (56.9%), aged 19 to 39 years (67.3%). Respondents described 698 cases of SGBV (R 328, P 370), comprising 1110 acts of multi-types of violence. Respondents from Malta (160) and Belgium (143) reported the highest number of SGBV cases. The main reported causes were frustration and stress (R 23.6%, P 37.6%, p 0.008) and differences related with cultural background (R 19.3%, P 20.3%, p 0.884). Respondents assumed that these acts of violence could be prevented by SGBV prevention interventions (R 31.5%, P 24.7%, p 0.293); improving living conditions (R 21.7%, P 15.3%, p 0.232); and promoting communication (R 16.1%, P 28.2%, p 0.042). The majority of R were not aware of existing preventable measures in the asylum facility or host country. While the majority of P were aware of existing preventable measures in the asylum facility or country. Proposed SGBV prevention strategies in EARF included SGBV sensitization and awareness, improving living

Evaluation of multiple emission point facilities

International Nuclear Information System (INIS)

Miltenberger, R.P.; Hull, A.P.; Strachan, S.; Tichler, J.

1988-01-01

In 1970, the New York State Department of Environmental Conservation (NYSDEC) assumed responsibility for the environmental aspect of the state's regulatory program for by-product, source, and special nuclear material. The major objective of this study was to provide consultation to NYSDEC and the US NRC to assist NYSDEC in determining if broad-based licensed facilities with multiple emission points were in compliance with NYCRR Part 380. Under this contract, BNL would evaluate a multiple emission point facility, identified by NYSDEC, as a case study. The review would be a nonbinding evaluation of the facility to determine likely dispersion characteristics, compliance with specified release limits, and implementation of the ALARA philosophy regarding effluent release practices. From the data collected, guidance as to areas of future investigation and the impact of new federal regulations were to be developed. Reported here is the case study for the University of Rochester, Strong Memorial Medical Center and Riverside Campus

A Multicriteria GIS-Based Assessment to Optimize Biomass Facility Sites with Parallel Environment—A Case Study in Spain

Directory of Open Access Journals (Sweden)

Jin Su Jeong

2017-12-01

Full Text Available Optimizing a biomass facility site is a critical concern that is currently receiving an increased attention because of geographically spread biomass feedstock. This research presents a multicriteria GIS assessment with Weighted Linear Combination (WLC (most suitable areas and a sensitivity analysis (implementation strategies applied to various disciplines using suitable criteria to optimize a biomass facility location in the context of renewable energies respecting the environment. The analyses of results with twelve criteria show the most suitable areas (9.25% and constraints in a case study in Extremadura (Spain, where forest and agriculture are typical for land uses. Thus, the sensitivity analysis demonstrates the insight of the most influential criteria for supporting energy planning decisions. Therefore, this assessment could be used in studies to verify suitable biomass plants sites with corresponding geographical and spatial circumstances and available spatial data necessary in various governmental and industrial sectors.

Radiation exposure and central nervous system cancers: A case-control study among workers at two nuclear facilities

International Nuclear Information System (INIS)

Carpenter, A.V.; Flanders, W.D.; Frome, E.L.; Crawford-Brown, D.J.; Fry, S.A.

1987-03-01

A nested case-control study was conducted among workers employed between 1943 and 1977 at two nuclear facilities to investigate the possible association of primary malignant neoplasms of the central nervous system (CNS) with occupational exposure to ionizing radiation from external and internal sources. Eighty-nine white male and female workers, who according to the information on death certificates dies of primary CNS cancers, were identified as cases. Four matched controls were selected for each case. External radiation exposure data were available from film badge readings for individual workers, whereas radiation dose to lung from internally deposited radionuclides, mainly uranium, was estimated from area and personnel monitoring data and was used in analyses in lieu of the dose to the brain. Matched sets were included in the analyses only if information was available for the case and at least one of the corresponding controls. Thus, the analyses of external radiation included 27 cases and 90 matched controls, and 47 cases and 120 matched controls were analyzed for the effects of radiation from internally deposited uranium. No association was observed between deaths fron CNS cancers and occupational exposure to ionizing radiation from external or internal sources. However, due to the small number of monitored subjects and low doses, a weak association could not be ruled out. 43 refs., 1 fig., 15 tabs

BIM Guidelines Inform Facilities Management Databases: A Case Study over Time

Directory of Open Access Journals (Sweden)

Karen Kensek

2015-08-01

Full Text Available A building information model (BIM contains data that can be accessed and exported for other uses during the lifetime of the building especially for facilities management (FM and operations. Working under the guidance of well-designed BIM guidelines to insure completeness and compatibility with FM software, architects and contractors can deliver an information rich data model that is valuable to the client. Large owners such as universities often provide these detailed guidelines and deliverable requirements to their building teams. Investigation of the University of Southern California (USC Facilities Management Service’s (FMS website showed a detailed plan including standards, file names, parameter lists, and other requirements of BIM data, which were specifically designated for facilities management use, as deliverables on new construction projects. Three critical details were also unearthed in the reading of these documents: Revit was the default BIM software; COBie was adapted to help meet facilities management goals; and EcoDomus provided a display of the collected data viewed through Navisworks. Published accounts about the Cinema Arts Complex developed with and under these guidelines reported positive results. Further examination with new projects underway reveal the rapidly changing relational database landscape evident in the new USC “Project Record Revit Requirement Execution Plan (PRxP”.

Challenges to improving case management of childhood pneumonia at health facilities in resource-limited settings.

Science.gov (United States)

Graham, Stephen M; English, Mike; Hazir, Tabish; Enarson, Penny; Duke, Trevor

2008-05-01

Effective case management is an important strategy to reduce pneumonia-related morbidity and mortality in children. Guidelines based on sound evidence are available but are used variably. This review outlines current guidelines for childhood pneumonia management in the setting where most child pneumonia deaths occur and identifies challenges for improved management in a variety of settings and different "at-risk" groups. These include appropriate choice of antibiotic, clinical overlap with other conditions, prompt and appropriate referral for inpatient care, and management of treatment failure. Management of neonates, and of HIV-infected or severely malnourished children is more complicated. The influence of co-morbidities on pneumonia outcome means that pneumonia case management must be integrated within strategies to improve overall paediatric care. The greatest potential for reducing pneumonia-related deaths in health facilities is wider implementation of the current guidelines built around a few core activities: training, antibiotics and oxygen. This requires investment in human resources and in equipment for the optimal management of hypoxaemia. It is important to provide data from a variety of epidemiological settings for formal cost-effectiveness analyses. Improvements in the quality of case management of pneumonia can be a vehicle for overall improvements in child health-care practices.

Natech accidents at industrial facilities. The case of the Wenchuan earthquake

OpenAIRE

Krausmann , Elisabeth; Cruz , Ana Maria; Affeltranger , Bastien

2009-01-01

International audience; Natural disasters can trigger chemical accidents (so-called Natech accidents) with severe consequences on man or the environment. This work highlights the main characteristics of earthquake-triggered Natechs by describing our insights from a field trip to chemical facilities in the area affected by the 12 May, 2008, Wenchuan earthquake in China. Our preliminary results indicate that damage was most severe in older facilities with masonry and un- or poorly reinforced co...

A New Extended MILP MRP Approach to Production Planning and Its Application in the Jewelry Industry

Directory of Open Access Journals (Sweden)

Erhan Yazıcı

2016-01-01

Full Text Available It is important to manage reverse material flows such as recycling, reusing, and remanufacturing in a production environment. This paper addresses a production planning problem which involves reusing of scrap and recycling of waste that occur in the various stages of the production process and remanufacturing/recycling of returns in a closed-loop supply chain environment. An extended material requirement planning (MRP is proposed as a mixed integer linear programming (MILP model which includes—beside forward—these reverse material flows. The proposed model is developed for the jewelry industry in Turkey, which uses gold as the primary resource of production. The aim is to manage these reverse material flows as a part of production planning to utilize resources. Considering the mostly unpredictable nature of reverse material flows, the proposed model is likewise transformed into a fuzzy model to provide a better review of production plan for the decision maker. The suggested model is examined through a case study to test the applicability and efficiency.

Regulatory review and confidence building in post-closure safety assessments and safety cases for near surface disposal facilities-IAEA ASAM coordinated research programme

International Nuclear Information System (INIS)

Gonzales, A.; Simeonov, G.; Bennett, D.G.; Nys, V.; Ben Belfadhel, M.

2005-01-01

Some years ago, the IAEA successfully concluded a Coordinated Research Program (CRP) called Islam, which focussed on the development of an Improved Safety Assessment Methodology for near-surface radioactive waste disposal facilities. In November 2002, and as an extension of ISAM, the IAEA launched a new CRP called ASAM, designed to test the Application of the Safety Assessment Methodology by considering a range of near-surface disposal facilities. The ASAM work programme is being implemented by three application working groups and two cross-cutting working groups. The application working groups are testing the applicability of the ISAM methodology by assessing an existing disposal facility in Hungary, a copper mine in South Africa, and a hypothetical facility containing heterogenous wastes, such as disused sealed sources. The first cross-cutting working group is addressing a number of technical issues that are common to all near-surface disposal facilities, while the second group, the Regulatory Review Working Group (RRWG) is developing guidance on how to gain confidence in safety assessments and safety cases, and on how to conduct regulatory reviews of safety assessments. This paper provides a brief overview of the work being conducted by the Regulatory Review Working Group. (author)

Estimation of marginal costs at existing waste treatment facilities.

Science.gov (United States)

Martinez-Sanchez, Veronica; Hulgaard, Tore; Hindsgaul, Claus; Riber, Christian; Kamuk, Bettina; Astrup, Thomas F

2016-04-01

This investigation aims at providing an improved basis for assessing economic consequences of alternative Solid Waste Management (SWM) strategies for existing waste facilities. A bottom-up methodology was developed to determine marginal costs in existing facilities due to changes in the SWM system, based on the determination of average costs in such waste facilities as function of key facility and waste compositional parameters. The applicability of the method was demonstrated through a case study including two existing Waste-to-Energy (WtE) facilities, one with co-generation of heat and power (CHP) and another with only power generation (Power), affected by diversion strategies of five waste fractions (fibres, plastic, metals, organics and glass), named "target fractions". The study assumed three possible responses to waste diversion in the WtE facilities: (i) biomass was added to maintain a constant thermal load, (ii) Refused-Derived-Fuel (RDF) was included to maintain a constant thermal load, or (iii) no reaction occurred resulting in a reduced waste throughput without full utilization of the facility capacity. Results demonstrated that marginal costs of diversion from WtE were up to eleven times larger than average costs and dependent on the response in the WtE plant. Marginal cost of diversion were between 39 and 287 € Mg(-1) target fraction when biomass was added in a CHP (from 34 to 303 € Mg(-1) target fraction in the only Power case), between -2 and 300 € Mg(-1) target fraction when RDF was added in a CHP (from -2 to 294 € Mg(-1) target fraction in the only Power case) and between 40 and 303 € Mg(-1) target fraction when no reaction happened in a CHP (from 35 to 296 € Mg(-1) target fraction in the only Power case). Although average costs at WtE facilities were highly influenced by energy selling prices, marginal costs were not (provided a response was initiated at the WtE to keep constant the utilized thermal capacity). Failing to systematically

A facility to Search for Hidden Particles at the CERN SPS: the SHiP physics case

CERN Document Server

Alekhin, Sergey; Asaka, Takehiko; Batell, Brian; Bezrukov, Fedor; Bondarenko, Kyrylo; Boyarsky, Alexey; Choi, Ki-Young; Corral, Cristobal; Craig, Nathaniel; Curtin, David; Davidson, Sacha; de Gouvea, Andre; Dell'Oro, Stefano; deNiverville, Patrick; Bhupal Dev, P.S.; Dreiner, Herbi; Drewes, Marco; Eijima, Shintaro; Essig, Rouven; Fradette, Anthony; Garbrecht, Bjorn; Gavela, Belen; Giudice, Gian F.; Goodsell, Mark D.; Gorbunov, Dmitry; Gori, Stefania; Grojean, Christophe; Guffanti, Alberto; Hambye, Thomas; Hansen, Steen H.; Helo, Juan Carlos; Hernandez, Pilar; Ibarra, Alejandro; Ivashko, Artem; Izaguirre, Eder; Jaeckel, Joerg; Jeong, Yu Seon; Kahlhoefer, Felix; Kahn, Yonatan; Katz, Andrey; Kim, Choong Sun; Kovalenko, Sergey; Krnjaic, Gordan; Lyubovitskij, Valery E.; Marcocci, Simone; Mccullough, Matthew; McKeen, David; Mitselmakher, Guenakh; Moch, Sven-Olaf; Mohapatra, Rabindra N.; Morrissey, David E.; Ovchynnikov, Maksym; Paschos, Emmanuel; Pilaftsis, Apostolos; Pospelov, Maxim; Reno, Mary Hall; Ringwald, Andreas; Ritz, Adam; Roszkowski, Leszek; Rubakov, Valery; Ruchayskiy, Oleg; Schienbein, Ingo; Schmeier, Daniel; Schmidt-Hoberg, Kai; Schwaller, Pedro; Senjanovic, Goran; Seto, Osamu; Shaposhnikov, Mikhail; Shchutska, Lesya; Shelton, Jessie; Shrock, Robert; Shuve, Brian; Spannowsky, Michael; Spray, Andy; Staub, Florian; Stolarski, Daniel; Strassler, Matt; Tello, Vladimir; Tramontano, Francesco; Tripathi, Anurag; Tulin, Sean; Vissani, Francesco; Winkler, Martin W.; Zurek, Kathryn M.; CERN. Geneva. SPS and PS Experiments Committee; SPSC

2016-10-24

This paper describes the physics case for a new fixed target facility at CERN SPS. The SHiP (Search for Hidden Particles) experiment is intended to hunt for new physics in the largely unexplored domain of very weakly interacting particles with masses below the Fermi scale, inaccessible to the LHC experiments, and to study tau neutrino physics. The same proton beam setup can be used later to look for decays of tau-leptons with lepton flavour number non-conservation, $\\tau\\to 3\\mu$ and to search for weakly-interacting sub-GeV dark matter candidates. We discuss the evidence for physics beyond the Standard Model and describe interactions between new particles and four different portals - scalars, vectors, fermions or axion-like particles. We discuss motivations for different models, manifesting themselves via these interactions, and how they can be probed with the SHiP experiment and present several case studies. The prospects to search for relatively light SUSY and composite particles at SHiP are also discussed....

The Impact of Carbon Emissions Policies on Reverse Supply Chain Network Design

Directory of Open Access Journals (Sweden)

Bandar A. ALKHAYYAL

2018-01-01

Full Text Available Reverse Supply Chain is described as an initiative that plays an important role in the global supply chain for those who seek environmentally responsible solutions for their end-of-life products. The relative economic and environmental benefits of reverse supply chain are influenced by costs and emissions during collection, transportation, recovery facilities, disassembly, recycling, remanufacturing, and disposal of unrecoverable components. The design of reverse supply chain network takes into account social, economic and environmental objectives. This paper addresses the design of reverse supply chain under the three common regulatory policies, strict carbon caps, carbon tax, and carbon cap-and-trade.

Monitored retrievable storage (MRS) facility and salt repository integration: Engineering study report

International Nuclear Information System (INIS)

1987-07-01

This MRS Facility and Salt Repository Integration Study evaluates the impacts of an integrated MRS/Salt Repository Waste Management System on the Salt Repository Surface facilities' design, operations, cost, and schedule. Eight separate cases were studied ranging from a two phase repository design with no MRS facility to a design in which the repository only received package waste from the MRS facility for emplacement. The addition of the MRS facility to the Waste Management System significantly reduced the capital cost of the salt repository. All but one of the cases studied were capable of meeting the waste acceptance data. The reduction in the size and complexity of the Salt Repository waste handling building with the integration of the MRS facility reduces the design and operating staff requirements. 7 refs., 35 figs., 43 tabs

Integrated social facility location planning for decision support: Accessibility studies provide support to facility location and integration of social service provision

CSIR Research Space (South Africa)

Green, Cheri A

2012-09-01

Full Text Available for two or more facilities to create an integrated plan for development Step 6 Costing of development plan Case Study Access norms and thresholds guidelines in accessibility analysis Appropriate norms/provision guidelines facilitate both service... access norms and threshold standards ?Test the relationship between service demand and the supply (service capacity) of the facility provision points within a defined catchment area ?Promote the ?right?sizing? of facilities relative to the demand...

The HEPCloud Facility: elastic computing for High Energy Physics - The NOvA Use Case

Science.gov (United States)

Fuess, S.; Garzoglio, G.; Holzman, B.; Kennedy, R.; Norman, A.; Timm, S.; Tiradani, A.

2017-10-01

The need for computing in the HEP community follows cycles of peaks and valleys mainly driven by conference dates, accelerator shutdown, holiday schedules, and other factors. Because of this, the classical method of provisioning these resources at providing facilities has drawbacks such as potential overprovisioning. As the appetite for computing increases, however, so does the need to maximize cost efficiency by developing a model for dynamically provisioning resources only when needed. To address this issue, the HEPCloud project was launched by the Fermilab Scientific Computing Division in June 2015. Its goal is to develop a facility that provides a common interface to a variety of resources, including local clusters, grids, high performance computers, and community and commercial Clouds. Initially targeted experiments include CMS and NOvA, as well as other Fermilab stakeholders. In its first phase, the project has demonstrated the use of the “elastic” provisioning model offered by commercial clouds, such as Amazon Web Services. In this model, resources are rented and provisioned automatically over the Internet upon request. In January 2016, the project demonstrated the ability to increase the total amount of global CMS resources by 58,000 cores from 150,000 cores - a 38 percent increase - in preparation for the Recontres de Moriond. In March 2016, the NOvA experiment has also demonstrated resource burst capabilities with an additional 7,300 cores, achieving a scale almost four times as large as the local allocated resources and utilizing the local AWS s3 storage to optimize data handling operations and costs. NOvA was using the same familiar services used for local computations, such as data handling and job submission, in preparation for the Neutrino 2016 conference. In both cases, the cost was contained by the use of the Amazon Spot Instance Market and the Decision Engine, a HEPCloud component that aims at minimizing cost and job interruption. This paper

Sea water take-up facility for cooling reactor auxiliary

International Nuclear Information System (INIS)

Numata, Noriko; Mizutani, Akira; Hirako, Shizuka; Uchiyama, Yuichi; Oda, Atsushi.

1997-01-01

The present invention provides an improvement of a cooling sea water take-up facility for cooling auxiliary equipments of nuclear power plant. Namely, an existent sea water take-up facility for cooling reactor auxiliary equipments has at least two circulation water systems and three independent sea water systems for cooling reactor auxiliary equipments. In this case, a communication water channel is disposed, which connects the three independent sea water systems for cooling reactor auxiliary equipments mutually by an opening/closing operation of a flow channel partitioning device. With such a constitution, even when any combination of two systems among the three circulation water systems is in inspection at the same time, one system for cooling the reactor auxiliary equipments can be kept operated, and one system is kept in a stand-by state by the communication water channel upon periodical inspection of water take-up facility for cooling the auxiliary equipments. As a result, the sea water take-up facility for cooling auxiliary equipments of the present invention have operation efficiency higher than that of a conventional case while keeping the function and safety at the same level as in the conventional case. (I.S.)

Nursing home case-mix reimbursement in Mississippi and South Dakota.

Science.gov (United States)

Arling, Greg; Daneman, Barry

2002-04-01

To evaluate the effects of nursing home case-mix reimbursement on facility case mix and costs in Mississippi and South Dakota. Secondary data from resident assessments and Medicaid cost reports from 154 Mississippi and 107 South Dakota nursing facilities in 1992 and 1994, before and after implementation of new case-mix reimbursement systems. The study relied on a two-wave panel design to examine case mix (resident acuity) and direct care costs in 1-year periods before and after implementation of a nursing home case-mix reimbursement system. Cross-lagged regression models were used to assess change in case mix and costs between periods while taking into account facility characteristics. Facility-level measures were constructed from Medicaid cost reports and Minimum Data Set-Plus assessment records supplied by each state. Resident case mix was based on the RUG-III classification system. Facility case-mix scores and direct care costs increased significantly between periods in both states. Changes in facility costs and case mix were significantly related in a positive direction. Medicare utilization and the rate of hospitalizations from the nursing facility also increased significantly between periods, particularly in Mississippi. The case-mix reimbursement systems appeared to achieve their intended goals: improved access for heavy-care residents and increased direct care expenditures in facilities with higher acuity residents. However, increases in Medicare utilization may have influenced facility case mix or costs, and some facilities may have been unprepared to care for higher acuity residents, as indicated by increased rates of hospitalization.

PACTEL and PWR PACTEL Test Facilities for Versatile LWR Applications

Directory of Open Access Journals (Sweden)

Virpi Kouhia

2012-01-01

Full Text Available This paper describes construction and experimental research activities with two test facilities, PACTEL and PWR PACTEL. The PACTEL facility, comprising of reactor pressure vessel parts, three loops with horizontal steam generators, a pressurizer, and emergency core cooling systems, was designed to model the thermal-hydraulic behaviour of VVER-440-type reactors. The facility has been utilized in miscellaneous applications and experiments, for example, in the OECD International Standard Problem ISP-33. PACTEL has been upgraded and modified on a case-by-case basis. The latest facility configuration, the PWR PACTEL facility, was constructed for research activities associated with the EPR-type reactor. A significant design basis is to utilize certain parts of PACTEL, and at the same time, to focus on a proper construction of two new loops and vertical steam generators with an extensive instrumentation. The PWR PACTEL benchmark exercise was launched in 2010 with a small break loss-of-coolant accident test as the chosen transient. Both facilities, PACTEL and PWR PACTEL, are maintained fully operational side by side.

PACTEL and PWR PACTEL Test Facilities for Versatile LWR Applications

International Nuclear Information System (INIS)

Virpi Kouhia, V.; Purhonen, H.; Riikonen, V.; Puustinen, M.; Kyrki-Rajamaki, R.; Vihavainen, J.

2012-01-01

This paper describes construction and experimental research activities with two test facilities, PACTEL and PWR PACTEL. The PACTEL facility, comprising of reactor pressure vessel parts, three loops with horizontal steam generators, a pressurizer, and emergency core cooling systems, was designed to model the thermal-hydraulic behaviour of VVER-440-type reactors. The facility has been utilized in miscellaneous applications and experiments, for example, in the OECD International Standard Problem ISP-33. PACTEL has been upgraded and modified on a case-by-case basis. The latest facility configuration, the PWR PACTEL facility, was constructed for research activities associated with the EPR-type reactor. A significant design basis is to utilize certain parts of PACTEL, and at the same time, to focus on a proper construction of two new loops and vertical steam generators with an extensive instrumentation. The PWR PACTEL benchmark exercise was launched in 2010 with a small break loss-of-coolant accident test as the chosen transient. Both facilities, PACTEL and PWR PACTEL, are maintained fully operational side by side.

Enhancement of safety for reprocessing facilities

International Nuclear Information System (INIS)

2012-06-01

The adequacy of the safety measures for utility loss accidents in nuclear fuel reprocessing facilities which have been formulated by the nuclear enterprises is investigated in JNES which organizes an advanced committee to specifically study this problem. The results are reviewed in the present report including the case of such severe accidents as in Fukushima Daiichi Nuclear Power Plant. The report also represents a tentative proposal for examination standards of such unimaginable severe accidents as 'station blackout,' urgent safety measures necessary for reoperation of nuclear power plants and requested by nuclear and industrial safety agency, and pointing out and clarification of the potential weakness from the safety point of view, and collective and composite evaluation of safety of the relevant facilities. Furthermore, the definition of accident management is given as of controlled condition and the authorized way of thinking for the cases of plural events happening at the same time and the cases when risks exist radioactivity emits with explosion. (S. Ohno)

A successful case site selection for low-and intermediate-level radioactive waste disposal facility

International Nuclear Information System (INIS)

Lee, Bongwoo

2007-01-01

Korea decided on Gyeongju-si as the site of low-and intermediate-level radioactive waste disposal facility by referendum in November, 2005. Five success factors are considered; 1) the mayor and municipal assembly leaded the public opinion of inhabitants, 2) an invitation group was formed by citizen, social and religious group, 3) Gyeongju-si has operated the nuclear power plant since 20 years ago, and this radioactive waste disposal facility brings large financial support, 4) many kinds of public information means were used for invitation agreement and 5) the preconception, a nuclear facility is danger, was removed by visiting citizen, social group and local inhabitants at the nuclear power plant facility. Promotion process of the project, invitation process of Gyeongju-si and success factors, construction of an invitation promotion group and development of public information activities, publicity of financial effects and safety of radioactive waste disposal facility, increase of general acceptance among inhabitants by many kinds of public information means, and P.R. of safety of nuclear power plant facility by visiting leadership layers are reported. (S.Y.)

Use and Application of the SADRWMS Methodology and SAFRAN Tool on the Thailand Institute of Nuclear Technology (TINT) Radioactive Waste Management Facility. Test Case Results. 05 October 2011

International Nuclear Information System (INIS)

2015-01-01

The purpose of this document is to describe the working procedure of the test case and to provide feedback on the application of the methodology described in DS284 and the SAFRAN tool. This report documents how the test case was performed, describes how the methodology and software tool were applied, and provides feedback on the use and application of the SAFRAN Tool. The aim of this document is to address the key elements of the safety assessment and to demonstrate their principle contents and roles within the overall context of the safety case. This is done with particular emphasis on investigating the role of the SAFRAN Tool in developing a safety case for facilities similar to the TINT Facility. It is intended that this report will be the first of a series of complimentary safety reports illustrating the use and application of the methodology prescribed in DS284 and the application of the SAFRAN tool to a range of predisposal radioactive waste management activities

Investment Strategy in a Closed Loop Supply Chain: The Case of a Market with Competition between Two Retailers

OpenAIRE

Sungwook Yoon; Sukjae Jeong

2017-01-01

To survive in the ceaseless cycle of competition, businesses have developed strategies to become sustainable. These strategies include reusing products, which can lead not only to the creation of economic benefits but also to improvements in a corporation’s social and environmental responsibility. Product reuse can also increase the profit earned on new products by compensating customers who bring in old products to buy new ones, as the ensuing remanufacturing process allows for the reuse of ...

The three waves in implementation of facility-based kangaroo mother care: a multi-country case study from Asia.

Science.gov (United States)

Bergh, Anne-Marie; de Graft-Johnson, Joseph; Khadka, Neena; Om'Iniabohs, Alyssa; Udani, Rekha; Pratomo, Hadi; De Leon-Mendoza, Socorro

2016-01-27

Kangaroo mother care has been highlighted as an effective intervention package to address high neonatal mortality pertaining to preterm births and low birth weight. However, KMC uptake and service coverage have not progressed well in many countries. The aim of this case study was to understand the institutionalisation processes of facility-based KMC services in three Asian countries (India, Indonesia and the Philippines) and the reasons for the slow uptake of KMC in these countries. Three main data sources were available: background documents providing insight in the state of implementation of KMC in the three countries; visits to a selection of health facilities to gauge their progress with KMC implementation; and data from interviews and meetings with key stakeholders. The establishment of KMC services at individual facilities began many years before official prioritisation for scale-up. Three major themes were identified: pioneers of facility-based KMC; patterns of KMC knowledge and skills dissemination; and uptake and expansion of KMC services in relation to global trends and national policies. Pioneers of facility-based KMC were introduced to the concept in the 1990s and established the practice in a few individual tertiary or teaching hospitals, without further spread. A training method beneficial to the initial establishment of KMC services in a country was to send institutional health-professional teams to learn abroad, notably in Colombia. Further in-country cascading took place afterwards and still later on KMC was integrated into newborn and obstetric care programs. The patchy uptake and expansion of KMC services took place in three phases aligned with global trends of the time: the pioneer phase with individual champions while the global focus was on child survival (1998-2006); the newborn-care phase (2007-2012); and lastly the current phase where small babies are also included in action plans. This paper illustrates the complexities of implementing a

Facility management and energy efficiency -- analysis and recommendations; Facility Management und Energieeffizienz: Analyse und Handlungsempfehlungen

Energy Technology Data Exchange (ETDEWEB)

Staub, P.; Weibel, K.; Zaugg, T. [Pom and Consulting Ltd., Zuerich (Switzerland); Lang, R. [Gruenberg and Partner Ltd., Zuerich (Switzerland); Frei, Ch. [Herzog Kull Group, Aarau (Switzerland)

2001-07-01

This final report presents the results of a study made on how facility management (FM) is positioned in enterprises and on how energy management can be integrated into the facility management process. Also, recommendations are made on the actions that are considered necessary to improve the understanding of facility management and energy management. The findings of an analysis made of the results of a survey among 200 enterprises, 20 interviews and 5 case studies are presented. The authors state that, in spite of the relatively small sample taken - mostly larger enterprises - trends in facility management and energy management could be shown. The findings of the survey, such as the relative importance of the integration of energy topics in facility management and the need for standardised indicators and benchmarking, are discussed in detail. Also, it is noted that the success of FM is in part due to delegation of responsibility to smaller business units or even to individual employees. The market potential for FM services is examined, with yearly growth rates of up to 20%. The importance of anchoring FM strategies at the top level of management is stressed, as is the need for promotion of the idea of facility management and training concepts for those responsible for its implementation.

Dual-Recycling Channel Decision in a Closed-Loop Supply Chain with Cost Disruptions

Directory of Open Access Journals (Sweden)

Yanting Huang

2017-11-01

Full Text Available This paper investigates cost disruptions of new and remanufactured products in a closed-loop supply chain where a manufacturer and a third-party collector recycle used products through online-recycling and offline-recycling channels, respectively. We use a Stackelberg game to acquire the equilibrium decisions of dual-recycling and single-recycling channels and analyze how cost disruptions affect the manufacturer’ production and collection strategies. We show that, cost disruption of new products produces a positive impact whilst the remanufacturing cost disruption has a negative impact on collection quantity of used products and negative cost disruptions of both new and remanufactured products could be profitable to the manufacturer. As for the manufacturer’s channel choice, the dual-recycling channel dominates single-recycling channels when new product cost faces positive disruption, because the manufacturer acts as both a buyer and a competitor to the collector and can determine an appropriate acquisition price and transfer price to coordinate the online-offline recycling channel. While if cost disruption of new products is negative, the manufacturer prefers the dual-recycling channel instead of single-recycling channels only if the remanufacturing cost faces large size of negative disruption.

Planning of public healthcare facility using a location allocation modelling: A case study

Science.gov (United States)

Shariff, S. Sarifah Radiah; Moin, Noor Hasnah; Omar, Mohd

2014-09-01

Finding the correct location of any facility and determining the demands which are to be assigned to it is very crucial in public health service. This is to ensure that the public gain maximum benefits. This article analyzes the previous location decisions of public primary healthcare (PHC) facilities in the district of Kuala Langat, Malaysia. With total population of 220214 (in 2010), the PHC in the district is currently served by 28 facilities. The percentages of total population covered (in 2007) within the maximum allowable distance of 3km and 5km are 69.7 percent and 77.8 percent respectively. This is very low compared to the Malaysian National Health Policy of Health for All or 100 percent coverage. The determination of health facility location should be planned carefully to further increase effective primary health service to the nation that is required for economic sustainability.

The Emergence of Large-Scale Computer Assisted Summative Examination Facilities in Higher Education

NARCIS (Netherlands)

Draaijer, S.; Warburton, W. I.

2014-01-01

A case study is presented of VU University Amsterdam where a dedicated large-scale CAA examination facility was established. In the facility, 385 students can take an exam concurrently. The case study describes the change factors and processes leading up to the decision by the institution to

Smart facility location planning for Smart Cities: using GIS technology and facility provision standards for pro-active planning of social facilities to support smart growth

CSIR Research Space (South Africa)

Green, Chéri

2016-08-01

Full Text Available step toward “smart” planning processes to support smart cities of the future. A case study application in Cape Town is used to illustrate the application of the methodology of spatially matching supply and demand for facilities using GIS tools...

Practical design of gamma irradiation facility

International Nuclear Information System (INIS)

Sugimoto, Sen-ichi

1976-01-01

In this report, it is intended to describe mainly the multi-purpose irradiation facilities which carry out the consigned irradiation for the sterilization of medical apparatuses, which is most of the demand of gamma irradiation in Japan. Gamma irradiation criterion is summed up to that ''Apply the specified dose properly and uniformly to product cases and be economic.'' Though the establishment of the design standard for irradiation facilities is not easy and is not solve simply, the factors to be considered in the design are as follows: (1) mechanism safety, (2) multipurpose irradiation structure, (3) irradiation criteria and practice, (4) efficiency of radiation source utilization and related problems, and (5) economical merit. Irradiation facilities are generally itemized as follows: irradiation equipments, radiation source-storing facility, package carrier, radiation source-driving equipments, facilities for safety and operational management and others. Examples and their characteristics are reported for the facilities of Japan Radio-isotope Irradiation Cooperative Association and Radie Industries Ltd. Expenses for construction, processing and radiation sources are shown on the basis of a few references, and the cost trially calculated under a certain presumptive condition is given. (Wakatsuki, Y.)

Innovative Procurement and Partnerships in Facilities Management

DEFF Research Database (Denmark)

Jensen, Per Anker

2011-01-01

A major study of facilities management best practice covering 36 cases from the Nordic countries in Europe shows, that the most outstanding examples of innovation in FM are initiated from the demand side and involves new forms of procurement with long term contracts. This paper considers in depth......-called operational partnerships with private providers concerning all municipal buildings and sports facilities in parts of a city. Each of the case studies has involved both the client and the provider side of the collaboration. The cases show that an essential element in a successful procurement and partnership...... is that the client allows the providers freedom to plan their activities. Thereby the providers can optimize the use of their productive capacity and utilize their competences with incentives to profit from such improvements. A major challenge is to balance the risks between the client and provider and to create...

Stockouts of HIV commodities in public health facilities in Kinshasa: Barriers to end HIV.

Directory of Open Access Journals (Sweden)

Tinne Gils

Full Text Available Stockouts of HIV commodities increase the risk of treatment interruption, antiretroviral resistance, treatment failure, morbidity and mortality. The study objective was to assess the magnitude and duration of stockouts of HIV medicines and diagnostic tests in public facilities in Kinshasa, Democratic Republic of the Congo. This was a cross-sectional survey involving visits to facilities and warehouses in April and May 2015. All zonal warehouses, all public facilities with more than 200 patients on antiretroviral treatment (ART (high-burden facilities and a purposive sample of facilities with 200 or fewer patients (low-burden facilities in Kinshasa were selected. We focused on three adult ART formulations, cotrimoxazole tablets, and HIV diagnostic tests. Availability of items was determined by physical check, while stockout duration until the day of the survey visit was verified with stock cards. In case of ART stockouts, we asked the pharmacist in charge what the facility coping strategy was for patients needing those medicines. The study included 28 high-burden facilities and 64 low-burden facilities, together serving around 22000 ART patients. During the study period, a national shortage of the newly introduced first-line regimen Tenofovir-Lamivudine-Efavirenz resulted in stockouts of this regimen in 56% of high-burden and 43% of low-burden facilities, lasting a median of 36 (interquartile range 29-90 and 44 days (interquartile range 24-90 until the day of the survey visit, respectively. Each of the other investigated commodities were found out of stock in at least two low-burden and two high-burden facilities. In 30/41 (73% of stockout cases, the commodity was absent at the facility but present at the upstream warehouse. In 30/57 (54% of ART stockout cases, patients did not receive any medicines. In some cases, patients were switched to different ART formulations or regimens. Stockouts of HIV commodities were common in the visited facilities

Ice condenser testing facility and plans

International Nuclear Information System (INIS)

Kannberg, L.D.; Ross, B.A.; Eschbach, E.J.; Ligotke, M.W.

1987-01-01

A facility is being constructed to experimentally validate the ICEDF computer code. The code was developed to estimate the extent of fission product retention in the ice compartments of pressurized water reactor ice condenser containment systems during severe accidents. The design and construction of the facility is based on a test design that addresses the validation needs of the code for conditions typical of those expected to occur during severe pressurized water reactor accidents. Detailed facility design has followed completion of a test design (i.e., assembled test cases each involving a different set of aerosol and thermohydraulic flow conditions). The test design was developed with the aid of statistical test design software and was scrutinized for applicability with the aid of ICEDF simulations. The test facility will incorporate a small section of a prototypic ice condenser (e.g., a cross section comprising the equivalent of four 1-ft-diameter ice baskets to their full prototypic height of 48 ft). The development of the test design, the detailed facility design, and the construction progress are described in this paper

Risk analysis and risk acceptance criteria in the planning processes of hazardous facilities-A case of an LNG plant in an urban area

International Nuclear Information System (INIS)

Vinnem, Jan Erik

2010-01-01

Planning of hazardous facilities is usually carried out on the basis of a risk-informed decision-making and planning process making use of risk analysis. This practice is well established in Norway under petroleum legislation but less so for onshore facilities under non-petroleum legislation. The present paper focuses on the use of risk analysis studies for risk evaluation against risk acceptance criteria, risk communication and derivation of technical and operational requirements in these circumstances. This is demonstrated through reference to a case study involving an LNG plant currently under construction in an urban area in Norway. The main finding is that risk-informed legislation is a fragile legislative system which is dependent on conscientious and open-minded use by the industrial developer. In the opposite case, the authorities may well be unable to correct the situation and the legislation may fail to protect the neighbourhood from unreasonable exposure to risk. Reference is also made to the international perspective where authorities define what is deemed tolerable risk, which would appear to be a more robust and defensible approach.

The HEPCloud Facility: elastic computing for High Energy Physics – The NOvA Use Case

Energy Technology Data Exchange (ETDEWEB)

Fuess, S. [Fermilab; Garzoglio, G. [Fermilab; Holzman, B. [Fermilab; Kennedy, R. [Fermilab; Norman, A. [Fermilab; Timm, S. [Fermilab; Tiradani, A. [Fermilab

2017-03-15

The need for computing in the HEP community follows cycles of peaks and valleys mainly driven by conference dates, accelerator shutdown, holiday schedules, and other factors. Because of this, the classical method of provisioning these resources at providing facilities has drawbacks such as potential overprovisioning. As the appetite for computing increases, however, so does the need to maximize cost efficiency by developing a model for dynamically provisioning resources only when needed. To address this issue, the HEPCloud project was launched by the Fermilab Scientific Computing Division in June 2015. Its goal is to develop a facility that provides a common interface to a variety of resources, including local clusters, grids, high performance computers, and community and commercial Clouds. Initially targeted experiments include CMS and NOvA, as well as other Fermilab stakeholders. In its first phase, the project has demonstrated the use of the “elastic” provisioning model offered by commercial clouds, such as Amazon Web Services. In this model, resources are rented and provisioned automatically over the Internet upon request. In January 2016, the project demonstrated the ability to increase the total amount of global CMS resources by 58,000 cores from 150,000 cores - a 25 percent increase - in preparation for the Recontres de Moriond. In March 2016, the NOvA experiment has also demonstrated resource burst capabilities with an additional 7,300 cores, achieving a scale almost four times as large as the local allocated resources and utilizing the local AWS s3 storage to optimize data handling operations and costs. NOvA was using the same familiar services used for local computations, such as data handling and job submission, in preparation for the Neutrino 2016 conference. In both cases, the cost was contained by the use of the Amazon Spot Instance Market and the Decision Engine, a HEPCloud component that aims at minimizing cost and job interruption. This paper

Women's social networks and use of facility delivery services for uncomplicated births in North West Ethiopia: a community-based case-control study.

Science.gov (United States)

Asrese, Kerebih; Adamek, Margaret E

2017-12-28

High maternal mortality has remained an unmet public health challenge in the developing world. Maternal mortality in Ethiopia is among the highest in the world. Since most maternal deaths occur during labor, delivery, and the immediate postpartum period, facility delivery with skilled birth attendants is recommended to reduce maternal mortality. Nonetheless, the majority of women in Ethiopia give birth at home. Individual attributes and availability and accessibility of services deter service utilization. The role of social networks that may facilitate or constrain service use is not well studied. Community-based case-control study was conducted between February and March 2014 in Jabi Tehinan District, North West Ethiopia. Retrospective data were collected from 134 women who had uncomplicated births at health facilities and 140 women who had uncomplicated births at home within a year preceding the survey. Interviews were held with eight women who had uncomplicated births at health facilities and 11 who had uncomplicated births at home. The quantitative data were entered and analyzed using SPSS for Windows versions 16.0 and hierarchical logistic regression model was used for analysis. The qualitative data were transcribed verbatim and data were used to substantiate the quantitative data. The results indicated that social network variables were significantly associated with the use of health facilities for delivery. Taking social networks into account improved the explanation of facility use for delivery services over women's individual attributes. Women embedded within homogeneous network members (Adjusted OR 2.53; 95% CI: 1.26-5.06) and embedded within high SBA endorsement networks (Adjusted OR 7.97; 95% CI: 4.07-12.16) were more likely to deliver at health facilities than their counterparts. Women living in urban areas (Adjusted OR 3.32; 95% CI: 1.37-8.05) and had better knowledge of obstetric complications (Adjusted OR 3.01; 95% CI: 1.46-6.18) were more likely to

Static and Dynamic Pricing Strategies in a Closed-Loop Supply Chain with Reference Quality Effects

Directory of Open Access Journals (Sweden)

Zhichao Zhang

2018-01-01

Full Text Available Remanufacturing of returned products has been increasingly recognized in industries as an effective approach to face environmental responsibility, government regulations, and increased awareness of consumers. In this paper, we address a closed-loop supply chain (CLSC in which the manufacturer produces the brand-new products, as well as the remanufactured goods while the retailer sells these products to customers. We consider several different scenarios: the manufacturer and the retailer adopt a steady-state price or a dynamic price with reference quality effects in a centralized case; either, neither or both the manufacturer and the retailer price dynamically with reference quality effects, respectively, in a decentralized model. We solve the problem with the retailer recycling the sold copies and deduce the optimal pricing strategies while the manufacturer in charge of recovering the used items in such a CLSC. The result shows that dynamic pricing strategies are much more profitable for the supply chain and its members when compared with pricing statically; the dynamic pricing strategies with time-varying quality characterized by reference quality are more suited to a long-term and cooperative closed-loop supply chain. Moreover, the optimal recycling fraction relies on the recovery cost coefficient and proves to be uniform despite adopting a dynamic price and quality in all distinct cases.

Case management redesign in an urban facility.

Science.gov (United States)

Almaden, Stefany; Freshman, Brenda; Quaye, Beverly

2011-01-01

To explore strategies for improving patient throughput and to redesign case management processes to facilitate level of care transitions and safe discharges. Large Urban Medical Center in South Los Angeles County, with 384 licensed beds that services poor, underserved communities. Both qualitative and quantitative methods were applied. Combined theoretical frameworks were used for needs assessment, intervention strategies, and change management. Observations, interviews, surveys, and database extraction methods were used. The sample consisted of case management staff members and several other staff from nursing, social work, and emergency department staff. Postintervention measures indicated improvement in reimbursements for services, reduction in length of stay, increased productivity, improved patients' access to care, and avoiding unnecessary readmission or emergency department visits. Effective change management strategies must consider multiple factors that influence daily operations and service delivery. Creating accountability by using performance measures associated with patient transitions is highlighted by the case study results. The authors developed a process model to assist in identifying and tracking outcome measures related to patient throughput, front-end assessments, and effective patient care transitions. This model can be used in future research to further investigate best case management practices.

Is the case-mix of patients who self-present to ED similar to general practice and other acute-care facilities?

Science.gov (United States)

Harris, Tim; McDonald, Keith

2014-12-01

To benchmark walk-in presentations to emergency departments (ED) with those presenting to other local acute healthcare facilities. A large teaching hospital with an annual ED census of 140, 000 adult patients and surrounding associated acute healthcare providers. A random sample of 384 patients who self-presented to the ED was obtained. Benchmarking data were drawn from two general practices; the Tower Hamlets Community Services walk-in centre (co-located on-site with the ED) and the GP-run out-of-hours service. The case-mix presenting to the ED was characterised by a higher proportion of injuries and chest pain, but fewer simple infections and non-traumatic musculoskeletal conditions as compared to other acute care facilities in our region. Patients with injuries and possible cardiac chest pain were more likely to attend the ED, and those with infection or musculoskeletal problems less likely, as compared with other acute healthcare facilities. The population presenting to the ED is distinct from that presenting to general practice, out-of-hours clinics, or walk-in centres. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

The Environmental Agency's Assessment of the Post-Closure Safety Case for the BNFL DRIGG Low Level Radioactive Waste Disposal Facility

International Nuclear Information System (INIS)

Streatfield, I. J.; Duerden, S. L.; Yearsley, R. A.

2002-01-01

The Environment Agency is responsible, in England and Wales, for authorization of radioactive waste disposal under the Radioactive Substances Act 1993. British Nuclear Fuels plc (BNFL) is currently authorized by the Environment Agency to dispose of solid low level radioactive waste at its site at Drigg, near Sellafield, NW England. As part of a planned review of this authorization, the Environment Agency is currently undertaking an assessment of BNFL's Post-Closure Safety Case Development Programme for the Drigg disposal facility. This paper presents an outline of the review methodology developed and implemented by the Environment Agency specifically for the planned review of BNFL's Post-Closure Safety Case. The paper also provides an overview of the Environment Agency's progress in its on-going assessment programme

Optimal control of hydroelectric facilities

Science.gov (United States)

Zhao, Guangzhi

This thesis considers a simple yet realistic model of pump-assisted hydroelectric facilities operating in a market with time-varying but deterministic power prices. Both deterministic and stochastic water inflows are considered. The fluid mechanical and engineering details of the facility are described by a model containing several parameters. We present a dynamic programming algorithm for optimizing either the total energy produced or the total cash generated by these plants. The algorithm allows us to give the optimal control strategy as a function of time and to see how this strategy, and the associated plant value, varies with water inflow and electricity price. We investigate various cases. For a single pumped storage facility experiencing deterministic power prices and water inflows, we investigate the varying behaviour for an oversimplified constant turbine- and pump-efficiency model with simple reservoir geometries. We then generalize this simple model to include more realistic turbine efficiencies, situations with more complicated reservoir geometry, and the introduction of dissipative switching costs between various control states. We find many results which reinforce our physical intuition about this complicated system as well as results which initially challenge, though later deepen, this intuition. One major lesson of this work is that the optimal control strategy does not differ much between two differing objectives of maximizing energy production and maximizing its cash value. We then turn our attention to the case of stochastic water inflows. We present a stochastic dynamic programming algorithm which can find an on-average optimal control in the face of this randomness. As the operator of a facility must be more cautious when inflows are random, the randomness destroys facility value. Following this insight we quantify exactly how much a perfect hydrological inflow forecast would be worth to a dam operator. In our final chapter we discuss the

When More is Less: The Case of Disconnected Information Systems in Indonesian Public Health Facilities

Science.gov (United States)

Wahid, Fathul; Teduh Dirgahayu, Raden; Hamzah, Almed; Setiaji, Hari

2018-03-01

The clear majority of previous studies have found that the absence of information systems to properly manage data is one of the main challenges in improving public health management. The present study offers an alternate perspective, revealing other emerging problems in cases where there are many information systems in place but without sufficient orchestration. The national government of Indonesia has been coercive in its implementation of various information systems without involving users at public health facilities, which has created many problems on the ground. The problems identified relate to the quality of the disconnected information systems currently in use, the lack of human resource development, unclear procedures, uncoordinated reports and the absence of an incentive scheme. The present study also highlights some practical implications, including the use of a more holistic perspective in designing and developing an integrated public health information infrastructure.

Gate-to-Gate Life Cycle Assessment for Determining Carbon Footprint of Catalytic Converter Assembly Process

Directory of Open Access Journals (Sweden)

A. N. Mustfizul Karim

2017-03-01

Full Text Available With the pursuit of embracing the circular economy, having upward trend in vehicle sales and environmental concern, sustainability has become an imperative part of the global automotive manufacturing strategies. One of the tactics to achieve this sustainable goal is to conserve and enhance the resource base by salvaging the embedded values from end-of-life product and for which, the remanufacturing can be considered as one of the most prominent epitome. Even though many of the auto parts like engine, transmissions, starters, alternators and etc. have been assessed for remanufacturability since last few decades, being a major component of a car body the Catalytic Converter (CC still remains unfocused in literature. However, to examine the remanufacturability of CC, a comprehensive study for assessing its economic, social, and environmental impact is inevitable. Therefore, with an underlying aim of designing the remanufacturable CC, in this endeavour an attempt has made to evaluate the environmental impact of its welding operations by means of energy consumption through gate-to-gate life cycle assessment. Real life data are collected from a Local Malaysian CC manufacturer. The obtained results show that the welding section has a carbon footprint of 0.203 kgCO2e/unit with major emission coming from the plasma arc welding. In addition to that, it is also observed that the value of carbon footprint is not only sensitive to the emission factor and processing time, but also it is responsive to the nature of the processing operations. Certainly, this observation will motivate to change the product design from the prospect of remanufacturing.

Impact of different disassembly line balancing algorithms on the performance of dynamic kanban system for disassembly line

Science.gov (United States)

Kizilkaya, Elif A.; Gupta, Surendra M.

2005-11-01

In this paper, we compare the impact of different disassembly line balancing (DLB) algorithms on the performance of our recently introduced Dynamic Kanban System for Disassembly Line (DKSDL) to accommodate the vagaries of uncertainties associated with disassembly and remanufacturing processing. We consider a case study to illustrate the impact of various DLB algorithms on the DKSDL. The approach to the solution, scenario settings, results and the discussions of the results are included.

Case Studies of Child Play Areas and Child Support Facilities.

Science.gov (United States)

1978-08-01

facilities associated with other attractions like shopping centers. In fact, a franchise of children’s playgrounds for shopping centers is being...parade ground is in the center of town, surrounded on the north side by a library, cafe , garden shop, PX, bank, commissary, clothing store, thrift shop

Physical, Structural and Operational Vulnerability of Critical Facilities in Valle de Chalco Solidaridad, Estado de Mexico, Mexico. Case of study: Avándaro, San Isidro and El Triunfo

Science.gov (United States)

Garcia Payne, D. G.; Novelo-Casanova, D. A.; Ponce-Pacheco, A. B.; Espinosa-Campos, O.; Huerta-Parra, M.; Reyes-Pimentel, T.; Rodriguez, F.; Benitez-Olivares, I.

2010-12-01

Valle de Chalco Solidaridad is located in Mexico City Metropolitan Area in Estado de Mexico, Mexico. In this town there is a sewage canal called “La Compañía”. A wall of this canal collapsed on February 5, 2010 due to heavy rains creating the flooding of four surrounding communities. It is important to point out that this area is frequently exposed to floods. In this work, we consider a critical facility as an essential structure for performance, health care and welfare within a community or/and as a place that can be used as shelter in case of emergency or disaster. Global vulnerability (the sum of the three measured vulnerabilities) of the 25 critical facilities identified in the locations of Avándaro, San Isidro and El Triunfo was assessed using the Community Vulnerability Assessment Tool developed by the National Oceanic and Atmospheric Administration (NOAA). For each critical facility we determined its operational, structural and physical vulnerabilities. For our analysis, we considered the four main natural hazards to which Valle de Chalco is exposed: earthquakes, floods, landslides and sinking. We considered five levels of vulnerability using a scale from 1 to 5, where values range from very low to very high vulnerability, respectively. A critical facilities database was generated by collecting general information for three categories: schools, government and church. Each facility was evaluated considering its location in relation to identified high-risk areas. Our results indicate that in average, the global vulnerability of all facilities is low, however, there are particular cases in which this global vulnerability is high. The average operational vulnerability of the three communities is moderate. The global structural vulnerability (sum of the structural vulnerability for the four analyzed hazards) is moderate. In particular, the structural vulnerability to earthquakes is low, to landslides is very low, to flooding is moderate and to sinking is

Facility Response Plan (FRP) Points, Region 9, 2014, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — A Facility Response Plan (FRP) demonstrates a facility's preparedness to respond to a worst case oil discharge. Under the Clean Water Act, as amended by the Oil...

Facility Response Plan (FRP) Points, Region 9, 2013, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — A Facility Response Plan (FRP) demonstrates a facility's preparedness to respond to a worst case oil discharge. Under the Clean Water Act, as amended by the Oil...

Facility Response Plan (FRP) Points, Region 9, 2012, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — A Facility Response Plan (FRP) demonstrates a facility's preparedness to respond to a worst case oil discharge. Under the Clean Water Act, as amended by the Oil...

Primary ureteral carcinoma: MRI diagnosis and comparison with other diagnostic imaging facilities

International Nuclear Information System (INIS)

An Ningyu; Jiang Bo; Cai Youquan; Liang Yan

2004-01-01

Objective: To investigate MRI examination methods and imaging manifestations of primary ureteral carcinoma, and to evaluate its clinical values when comparing with other diagnostic imaging facilities. Methods: Eighty-seven cases of primary ureteral carcinoma who were operated within recent 8 years came into the study, among which, 35 cases had MRI examinations. For MRI examination, coronal heavy T 2 WI (water imaging) was performed to show the dilated ureter, then axial T 2 WI and T 1 WI were scanned at the obstruction level. 11 cases underwent additional Gd-DTPA dynamic contrast enhanced scans. The original pre-operative diagnostic reports of various imaging facilities were analyzed comparing with the results of operation and pathology. Results: MRI showed ureteral dilatation in 33 of 35 cases, no abnormal appearance in 1 case, and only primary kidney atrophy post renal transplantation in 1 case. Among the 33 cases with ureteral obstruction, soft mass at the obstruction level was detected on axial scans in 32 cases. The lesions showed gradual and homogeneous mild to moderate enhancement on contrast MRI. The overall employment rate of imaging facilities was as follows: ultrasound (94.3%), IVU (59.8%), CT (52.9%), MRI (40.2%), and RUP (35.6%). The accurate diagnostic rate was as follows :MRI (91.4%), RUP (80.6%), CT (63.0%), ultrasound (47.6%), and IVU (11.5%). Conclusion: Combination of MR water imaging and conventional sequences can demonstrate most primary ureteral carcinoma lesions and has a highest diagnostic accuracy among the current diagnostic imaging facilities. It should be taken as the first diagnostic imaging method of choice when primary ureteral carcinoma is suspected after ultrasound screening

A cloud-based production system for information and service integration: an internet of things case study on waste electronics

Science.gov (United States)

Wang, Xi Vincent; Wang, Lihui

2017-08-01

Cloud computing is the new enabling technology that offers centralised computing, flexible data storage and scalable services. In the manufacturing context, it is possible to utilise the Cloud technology to integrate and provide industrial resources and capabilities in terms of Cloud services. In this paper, a function block-based integration mechanism is developed to connect various types of production resources. A Cloud-based architecture is also deployed to offer a service pool which maintains these resources as production services. The proposed system provides a flexible and integrated information environment for the Cloud-based production system. As a specific type of manufacturing, Waste Electrical and Electronic Equipment (WEEE) remanufacturing experiences difficulties in system integration, information exchange and resource management. In this research, WEEE is selected as the example of Internet of Things to demonstrate how the obstacles and bottlenecks are overcome with the help of Cloud-based informatics approach. In the case studies, the WEEE recycle/recovery capabilities are also integrated and deployed as flexible Cloud services. Supporting mechanisms and technologies are presented and evaluated towards the end of the paper.

Risk assessment of CST-7 proposed waste treatment and storage facilities Volume I: Limited-scope probabilistic risk assessment (PRA) of proposed CST-7 waste treatment & storage facilities. Volume II: Preliminary hazards analysis of proposed CST-7 waste storage & treatment facilities

Energy Technology Data Exchange (ETDEWEB)

Sasser, K.

1994-06-01

In FY 1993, the Los Alamos National Laboratory Waste Management Group [CST-7 (formerly EM-7)] requested the Probabilistic Risk and Hazards Analysis Group [TSA-11 (formerly N-6)] to conduct a study of the hazards associated with several CST-7 facilities. Among these facilities are the Hazardous Waste Treatment Facility (HWTF), the HWTF Drum Storage Building (DSB), and the Mixed Waste Receiving and Storage Facility (MWRSF), which are proposed for construction beginning in 1996. These facilities are needed to upgrade the Laboratory`s storage capability for hazardous and mixed wastes and to provide treatment capabilities for wastes in cases where offsite treatment is not available or desirable. These facilities will assist Los Alamos in complying with federal and state requlations.

Facility disparities in reporting comorbidities to the National Trauma Data Bank.

Science.gov (United States)

Fransman, Ryan; Kent, Alistair J; Haut, Elliott R; Reema Kar, A; Sakran, Joseph V; Stevens, Kent; Efron, David T; Jones, Christian

2018-01-27

The National Trauma Data Bank (NTDB) includes patient comorbidities. This study evaluates factors of trauma centers associated with higher rates of missing comorbidity data. Proportions of missing comorbidity data from facilities in the NTDB from 2011 to 2014 were evaluated for associations with facility characteristics. Proportional impact analysis was performed to identify potential policy targets. Of 919 included facilities, 85% reported comorbidity data in 95% or more cases; only 31.3% were missing no data. Missing rates were significantly different based on most facility categories, but independently associated only with hospital size, region, and trauma center level. Only 15% of centers were responsible for over 80% of cases missing data. There is significant nonrandom variation in reporting trauma patient comorbidities to the NTDB. Missing data needs to be recognized and considered in studies of trauma comorbidities. Targeted intervention may improve data quality. Copyright © 2018 Elsevier Inc. All rights reserved.

Regulations and financing for decommissioning of nuclear facilities

International Nuclear Information System (INIS)

Kumakura, Osamu

1981-01-01

The purpose of this report is to survey the French legislation concerning the decommissioning of nuclear facilities and the method of financing for it. There is no clause in French regulations, which states any specific criterion or licensing procedure for the proper decommissioning. The legal problems in this domain are treated within the general regulation system on atomic energy. The decommissioning of nuclear facilities is carried out in accordance with the licensing procedure for constructing nuclear facilities or the permission procedure for operating them, according to the ''Decree on nuclear installations, 1963''. The works for the final shut-down and decommissioning are regarded as the modification to the safety report or the general operation instructions, and new permit is required. In the case that the radioactivity of substances after decommissioning is above the criteria of the Decree, 1963, the new license is required. In the case of below the criteria, the facilities are governed by the ''Act on installations classified for environmental protection, 1976''. The ''Decree on general radiation protection, 1966'', the ''Decree on radiation protection of workers in nuclear installations, 1975'', the ''Ministerial order on transport of dangerous materials, 1945'', and two ministerial orders on radioactive effluent discharge, 1974, are applied to the decommissioning works. (Kako, I.)

Opportunities for Process Monitoring Techniques at Delayed Access Facilities

Energy Technology Data Exchange (ETDEWEB)

Curtis, Michael M.; Gitau, Ernest TN; Johnson, Shirley J.; Schanfein, Mark; Toomey, Christopher

2013-09-20

Except for specific cases where the International Atomic Energy Agency (IAEA) maintains a continuous presence at a facility (such as the Japanese Rokkasho Reprocessing Plant), there is always a period of time or delay between the moment a State is notified or aware of an upcoming inspection, and the time the inspector actually enters the material balance area or facility. Termed by the authors as “delayed access,” this period of time between inspection notice and inspector entrance to a facility poses a concern. Delayed access also has the potential to reduce the effectiveness of measures applied as part of the Safeguards Approach for a facility (such as short-notice inspections). This report investigates the feasibility of using process monitoring to address safeguards challenges posed by delayed access at a subset of facility types.

GIS-based approach for defining bioenergy facilities location: A case study in Northern Spain based on marginal delivery costs and resources competition between facilities

Energy Technology Data Exchange (ETDEWEB)

Panichelli, Luis; Gnansounou, Edgard [Laboratory of Energy Systems, Swiss Federal Institute of Technology, LASEN-ICARE-ENAC, Station 18, EPFL, CH-1015 Lausanne (Switzerland)

2008-04-15

This paper presents a GIS-based decision support system for selecting least-cost bioenergy locations when there is a significant variability in biomass farmgate price and when more than one bioenergy plant with a fixed capacity has to be placed in the region. The methodology tackles the resources competition problem between energy facilities through a location-allocation model based on least-cost biomass quantities. Whole system least delivery cost including intermediate bioenergy products is estimated. The methodology is based on a case study where forest wood residues (FWR) from final cuttings (FCs) are used to produce torrefied wood (TW) in two torrefaction plants (TUs) that supply a gasification unit (GU) in order to produce electricity. The provinces of Navarra, Bizkaia, Gipuzkoa, Alava, La Rioja, Cantabria and Burgos are assessed in order to find the best locations for settling down the TUs and the GU according to biomass availability, FWR and TW marginal delivery costs. (author)

Directory of transport packaging test facilities

International Nuclear Information System (INIS)

1983-08-01

Radioactive materials are transported in packagings or containers which have to withstand certain tests depending on whether they are Type A or Type B packagings. In answer to a request by the International Atomic Energy Agency, 13 Member States have provided information on the test facilities and services existing in their country which can be made available for use by other states by arrangement for testing different kinds of packagings. The directory gives the technical information on the facilities, the services, the tests that can be done and in some cases even the financial arrangement is included

Safeguards Licensing Aspects of a Future Gen IV Test Facility - a Case Study

International Nuclear Information System (INIS)

Lindell, M. Aberg; Grape, S.; Hakansson, A.; Svaerd, S. Jacobsson

2010-01-01

The scope of this study covers safeguards licensing aspects of a possible future Gen IV demonstration facility. As a basis for the investigation, the facility was assumed to be located in Sweden, comprising a lead-cooled fast reactor and a reprocessing plant with fuel fabrication. The aim has been to identify safeguards requirements that may be set by the IAEA and the Swedish Radiation Safety Authority, and also to suggest how the safeguards system could be implemented in practice. The changed usage and handling of nuclear fuel, as compared to that of today, has been examined in order to determine how today's safeguards measures can be modified and extended to meet the needs of the demonstration facility. This work is part of GENIUS, the Swedish Gen IV research and development programme, which emphasizes lead-cooled fast reactors. (author)

Safeguards implementation at US facilities during 1986 and 1987

International Nuclear Information System (INIS)

Wredberg, L.

1987-01-01

Safeguards procedures were implemented at three nuclear facilities in the United States during 1986 and 1987, namely, the Westinghouse fuel fabrication plant in Columbia, South Carolina; the Salem No. 1 light water reactor (LWR) in New Jersey; and the Turkey Point No. 4 LWR in Florida. These three facilities have been under International Atomic Energy Agency (IAEA) safeguards since early 1986 in accordance with the voluntary offer agreement between the IAEA and the United States, which went into force in 1980. Because of limited manpower and budget resources allocated to safeguards in nuclear weapon states, only a limited number of facilities can be under IAEA safeguards inspections at a time. Facilities are, therefore, subject to inspection only during a 2-yr period in the case of the United States. After that period other facilities are selected for another 2-yr period from the list of facilities subject to safeguards under the agreement. The facilities have been selected so that they form a fuel cycle, i.e., the inspected reactors are fueled with fuel assemblies manufactured by the inspected fabrication plant. The IAEA applies full scope safeguards at the selected facilities based upon established implementation practice for the facility types

Emission Facilities - Erosion & Sediment Control Facilities

Data.gov (United States)

NSGIC Education | GIS Inventory — An Erosion and Sediment Control Facility is a DEP primary facility type related to the Water Pollution Control program. The following sub-facility types related to...

Acute hepatitis B outbreaks in 2 skilled nursing facilities and possible sources of transmission: North Carolina, 2009-2010.

Science.gov (United States)

Seña, Arlene C; Moorman, Anne; Njord, Levi; Williams, Roxanne E; Colborn, James; Khudyakov, Yury; Drobenuic, Jan; Xia, Guo-Liang; Wood, Hattie; Moore, Zack

2013-07-01

Acute hepatitis B virus (HBV) infections have been reported in long-term care facilities (LTCFs), primarily associated with infection control breaks during assisted blood glucose monitoring. We investigated HBV outbreaks that occurred in separate skilled nursing facilities (SNFs) to determine factors associated with transmission. Outbreak investigation with case-control studies. Two SNFs (facilities A and B) in Durham, North Carolina, during 2009-2010. Residents with acute HBV infection and controls randomly selected from HBV-susceptible residents during the outbreak period. After initial cases were identified, screening was offered to all residents, with repeat testing 3 months later for HBV-susceptible residents. Molecular testing was performed to assess viral relatedness. Infection control practices were observed. Case-control studies were conducted to evaluate associations between exposures and acute HBV infection in each facility. Six acute HBV cases were identified in each SNF. Viral phylogenetic analysis revealed a high degree of HBV relatedness within, but not between, facilities. No evaluated exposures were significantly associated with acute HBV infection in facility A; those associated with infection in facility B (all odds ratios >20) included injections, hospital or emergency room visits, and daily blood glucose monitoring. Observations revealed absence of trained infection control staff at facility A and suboptimal hand hygiene practices during blood glucose monitoring and insulin injections at facility B. These outbreaks underscore the vulnerability of LTCF residents to acute HBV infection, the importance of surveillance and prompt investigation of incident cases, and the need for improved infection control education to prevent transmission.

Spacing Sensitivity Analysis of HLW Intermediate Storage Facility

International Nuclear Information System (INIS)

Youn, Bum Soo; Lee, Kwang Ho

2010-01-01

Currently, South Korea's spent fuels are stored in its temporary storage within the plant. But the temporary storage is expected to be reaching saturation soon. For the effective management of spent fuel wastes, the need for intermediate storage facility is a desperate position. However, the research for the intermediate storage facility for waste has not made active so far. In addition, in case of foreign countries it is mostly treated confidentially and the information isn't easy to collect. Therefore, the purpose of this study is creating the basic thermal analysis data for the waste storage facility that will be valuable in the future

Strategy and Space for Broadcasting Facilities

DEFF Research Database (Denmark)

Jensen, Per Anker

2006-01-01

The paper is based on results from an ongoing research project on space strategies and building values, which in-cludes a major case study of the development of facilities for the Danish Broadcasting Corporation over time. The focus is to identify, how different space strategies have been...

Breathing new life into your production irradiator the case for reinvesting in your facility

International Nuclear Information System (INIS)

Aube, Robert; Wynnyk, Mike

2002-01-01

This paper focuses on one of the important technology issues facing the gamma processing industry today: that of strategically planning for extending the useful life of a production irradiator. Production irradiator owners are typically faced with the difficult question of whether or not to significantly reinvest in their facilities after 15-20 years of service. At this point in time the irradiator has likely provided many years of safe, reliable service and has paid for itself many times over. As the equipment ages, it may become less reliable, due to wear and maintenance practices, and more costly to operate. The cost of refurbishing the equipment may be significant and the downtime required to complete the refurbishment is also likely to be a challenge. This makes it essential to present a clear and rational justification for reinvesting in the facility. There has been a growing trend in recent years for irradiator owners to refurbish or upgrade their facilities. This trend is driven by the need to keep the facilities operating efficiently and safely as well as by the desire to take advantage of advancements that have occurred in the technology over the years. These advancements can enhance equipment efficiency, improve operational effectiveness and maintain or exceed quality assurance requirements. This paper illustrates the value of reinvesting in irradiator facilities, and highlights the significant benefits derived

Risk assessment of CST-7 proposed waste treatment and storage facilities Volume I: Limited-scope probabilistic risk assessment (PRA) of proposed CST-7 waste treatment ampersand storage facilities. Volume II: Preliminary hazards analysis of proposed CST-7 waste storage ampersand treatment facilities

International Nuclear Information System (INIS)

Sasser, K.

1994-06-01

In FY 1993, the Los Alamos National Laboratory Waste Management Group [CST-7 (formerly EM-7)] requested the Probabilistic Risk and Hazards Analysis Group [TSA-11 (formerly N-6)] to conduct a study of the hazards associated with several CST-7 facilities. Among these facilities are the Hazardous Waste Treatment Facility (HWTF), the HWTF Drum Storage Building (DSB), and the Mixed Waste Receiving and Storage Facility (MWRSF), which are proposed for construction beginning in 1996. These facilities are needed to upgrade the Laboratory's storage capability for hazardous and mixed wastes and to provide treatment capabilities for wastes in cases where offsite treatment is not available or desirable. These facilities will assist Los Alamos in complying with federal and state requlations

The dynamic storage and restart facilities in MABEL-2

International Nuclear Information System (INIS)

Nye, M.T.S.

1983-12-01

MABEL-2 is a FORTRAN program for calculating clad ballooning in a PWR during a LOCA. Originally written with fixed array storage, the use of the code has been extended by including dynamic storage. The lengths of the arrays in the program are set at execution time, varying from run to run. This allows much greater freedom in the choice of mesh and the size of case run. The use of computer memory is also more efficient. In addition a restart facility has been included which allows the user to break off and restart execution of the program (once or many times) during a transient. By using this facility much longer calculations can be run. Should an error in either input data or program become apparent late in a transient, the case need only be re-run from the last dump because some input data can be altered at restart. The use of these new facilities and the coding changes are described. (author)

Facility Response Plan (FRP) Inspected Points, Region 9, 2014, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — A Facility Response Plan (FRP) demonstrates a facility's preparedness to respond to a worst case oil discharge. Under the Clean Water Act, as amended by the Oil...

CASE STUDY

African Journals Online (AJOL)

HIV infection has several oral manifestations, including oral candidiasis and oral hairy leucoplakia. Occasionally unusual presentations requiring rigorous investigations are seen, and in these cases the diagnosis sometimes remains a dilemma owing to limited investigation facilities.1-3 We present the case of a patient who.

Effects of a Facility Dog on Student Learning and Learning Environment

Science.gov (United States)

Bradley, Jordana; Maldonado, Nancy

2013-01-01

Educators must consider alternative teaching strategies. Facility dogs as an instructional enhancement are an innovative teaching approach. This case study, guided by human-animal bond theory, investigated how the presence of a trained facility dog, Smooch, affected the school environment. Interviews, field notes and observations were used to…

A blueprint-based case study analysis of nutrition services provided in a midterm care facility for the elderly.

Science.gov (United States)

Paquet, Catherine; St-Arnaud-Mckenzie, Danielle; Ferland, Guylaine; Dubé, Laurette

2003-03-01

Ensuring nutritionally adequate food intake in institutions is a complex and important challenge for dietitians. To tackle this problem, we argue that dietitians need to adopt a systematic, integrative, and patient-centered approach to identify and manage more effectively organizational determinants of the quality of food intake under their control. In this study, we introduce such an approach, the blueprint-based case study, that we applied in the context of a midterm care facility for elderly patients. Data gathered through interviews and field observations were used to develop, from the perspective of key patient encounters, detailed representations of the food, nutrition, and nursing activities necessary to ensure adequate food intake. These service "blueprints" were developed to illustrate all activities that might potentially impact on the nutritional, sensory, functional, and social quality of patients' meals. They were also used as roadmaps to develop a case study analysis in which critical areas were identified and opportunities for improvement put forth, while considering services' resources and priorities. By providing a precise, objective, yet comprehensive mapping of the service operations and management, the blueprint-based case study approach represents a valuable tool to determine the optimal allocation of resources to insure nutritionally adequate food intake to patients.

An integrated lean-methods approach to hospital facilities redesign.

Science.gov (United States)

Nicholas, John

2012-01-01

Lean production methods for eliminating waste and improving processes in manufacturing are now being applied in healthcare. As the author shows, the methods are appropriate for redesigning hospital facilities. When used in an integrated manner and employing teams of mostly clinicians, the methods produce facility designs that are custom-fit to patient needs and caregiver work processes, and reduce operational costs. The author reviews lean methods and an approach for integrating them in the redesign of hospital facilities. A case example of the redesign of an emergency department shows the feasibility and benefits of the approach.

A facility to search for hidden particles at the CERN SPS: the SHiP physics case.

Science.gov (United States)

Alekhin, Sergey; Altmannshofer, Wolfgang; Asaka, Takehiko; Batell, Brian; Bezrukov, Fedor; Bondarenko, Kyrylo; Boyarsky, Alexey; Choi, Ki-Young; Corral, Cristóbal; Craig, Nathaniel; Curtin, David; Davidson, Sacha; de Gouvêa, André; Dell'Oro, Stefano; deNiverville, Patrick; Bhupal Dev, P S; Dreiner, Herbi; Drewes, Marco; Eijima, Shintaro; Essig, Rouven; Fradette, Anthony; Garbrecht, Björn; Gavela, Belen; Giudice, Gian F; Goodsell, Mark D; Gorbunov, Dmitry; Gori, Stefania; Grojean, Christophe; Guffanti, Alberto; Hambye, Thomas; Hansen, Steen H; Helo, Juan Carlos; Hernandez, Pilar; Ibarra, Alejandro; Ivashko, Artem; Izaguirre, Eder; Jaeckel, Joerg; Jeong, Yu Seon; Kahlhoefer, Felix; Kahn, Yonatan; Katz, Andrey; Kim, Choong Sun; Kovalenko, Sergey; Krnjaic, Gordan; Lyubovitskij, Valery E; Marcocci, Simone; Mccullough, Matthew; McKeen, David; Mitselmakher, Guenakh; Moch, Sven-Olaf; Mohapatra, Rabindra N; Morrissey, David E; Ovchynnikov, Maksym; Paschos, Emmanuel; Pilaftsis, Apostolos; Pospelov, Maxim; Reno, Mary Hall; Ringwald, Andreas; Ritz, Adam; Roszkowski, Leszek; Rubakov, Valery; Ruchayskiy, Oleg; Schienbein, Ingo; Schmeier, Daniel; Schmidt-Hoberg, Kai; Schwaller, Pedro; Senjanovic, Goran; Seto, Osamu; Shaposhnikov, Mikhail; Shchutska, Lesya; Shelton, Jessie; Shrock, Robert; Shuve, Brian; Spannowsky, Michael; Spray, Andy; Staub, Florian; Stolarski, Daniel; Strassler, Matt; Tello, Vladimir; Tramontano, Francesco; Tripathi, Anurag; Tulin, Sean; Vissani, Francesco; Winkler, Martin W; Zurek, Kathryn M

2016-12-01

This paper describes the physics case for a new fixed target facility at CERN SPS. The SHiP (search for hidden particles) experiment is intended to hunt for new physics in the largely unexplored domain of very weakly interacting particles with masses below the Fermi scale, inaccessible to the LHC experiments, and to study tau neutrino physics. The same proton beam setup can be used later to look for decays of tau-leptons with lepton flavour number non-conservation, [Formula: see text] and to search for weakly-interacting sub-GeV dark matter candidates. We discuss the evidence for physics beyond the standard model and describe interactions between new particles and four different portals-scalars, vectors, fermions or axion-like particles. We discuss motivations for different models, manifesting themselves via these interactions, and how they can be probed with the SHiP experiment and present several case studies. The prospects to search for relatively light SUSY and composite particles at SHiP are also discussed. We demonstrate that the SHiP experiment has a unique potential to discover new physics and can directly probe a number of solutions of beyond the standard model puzzles, such as neutrino masses, baryon asymmetry of the Universe, dark matter, and inflation.

Public perception of odour and environmental pollution attributed to MSW treatment and disposal facilities: A case study

International Nuclear Information System (INIS)

De Feo, Giovanni; De Gisi, Sabino; Williams, Ian D.

2013-01-01

Highlights: ► Effects of closing MSW facilities on perception of odour and pollution studied. ► Residents’ perception of odour nuisance considerably diminished post closure. ► Odour perception showed an association with distance from MSW facilities. ► Media coverage increased knowledge about MSW facilities and how they operate. ► Economic compensation possibly affected residents’ views and concerns. - Abstract: If residents’ perceptions, concerns and attitudes towards waste management facilities are either not well understood or underestimated, people can produce strong opposition that may include protest demonstrations and violent conflicts such as those experienced in the Campania Region of Italy. The aim of this study was to verify the effects of the closure of solid waste treatment and disposal facilities (two landfills and one RDF production plant) on public perception of odour and environmental pollution. The study took place in four villages in Southern Italy. Identical questionnaires were administered to residents during 2003 and after the closure of the facilities occurred in 2008. The residents’ perception of odour nuisance considerably diminished between 2003 and 2009 for the nearest villages, with odour perception showing an association with distance from the facilities. Post closure, residents had difficulty in identifying the type of smell due to the decrease in odour level. During both surveys, older residents reported most concern about the potentially adverse health impacts of long-term exposure to odours from MSW facilities. However, although awareness of MSW facilities and concern about potentially adverse health impacts varied according to the characteristics of residents in 2003, substantial media coverage produced an equalisation effect and increased knowledge about the type of facilities and how they operated. It is possible that residents of the village nearest to the facilities reported lower awareness of and concern about

Public perception of odour and environmental pollution attributed to MSW treatment and disposal facilities: A case study

Energy Technology Data Exchange (ETDEWEB)

De Feo, Giovanni, E-mail: g.defeo@unisa.it [Department of Industrial Engineering, University of Salerno, via Ponte don Melillo 1, 84084 Fisciano (Italy); De Gisi, Sabino [Department of Industrial Engineering, University of Salerno, via Ponte don Melillo 1, 84084 Fisciano (Italy); Williams, Ian D. [Waste Management Research Group, Faculty of Engineering and the Environment, University of Southampton, Highfield, Southampton SO17 1BJ (United Kingdom)

2013-04-15

Highlights: ► Effects of closing MSW facilities on perception of odour and pollution studied. ► Residents’ perception of odour nuisance considerably diminished post closure. ► Odour perception showed an association with distance from MSW facilities. ► Media coverage increased knowledge about MSW facilities and how they operate. ► Economic compensation possibly affected residents’ views and concerns. - Abstract: If residents’ perceptions, concerns and attitudes towards waste management facilities are either not well understood or underestimated, people can produce strong opposition that may include protest demonstrations and violent conflicts such as those experienced in the Campania Region of Italy. The aim of this study was to verify the effects of the closure of solid waste treatment and disposal facilities (two landfills and one RDF production plant) on public perception of odour and environmental pollution. The study took place in four villages in Southern Italy. Identical questionnaires were administered to residents during 2003 and after the closure of the facilities occurred in 2008. The residents’ perception of odour nuisance considerably diminished between 2003 and 2009 for the nearest villages, with odour perception showing an association with distance from the facilities. Post closure, residents had difficulty in identifying the type of smell due to the decrease in odour level. During both surveys, older residents reported most concern about the potentially adverse health impacts of long-term exposure to odours from MSW facilities. However, although awareness of MSW facilities and concern about potentially adverse health impacts varied according to the characteristics of residents in 2003, substantial media coverage produced an equalisation effect and increased knowledge about the type of facilities and how they operated. It is possible that residents of the village nearest to the facilities reported lower awareness of and concern about

Energy Upgrades at City-Owned Facilities: Understanding Accounting for Energy Efficiency Financing Options. City of Dubuque Case Study

Energy Technology Data Exchange (ETDEWEB)

Leventis, Greg [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Markets and Policy Group; Schiller, Steve [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Markets and Policy Group; Kramer, Chris [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Futures Group; Schwartz, Lisa [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Markets and Policy Group

2017-06-30

The city of Dubuque, Iowa, aimed for a twofer — lower energy costs for public facilities and reduced air emissions. To achieve that goal, the city partnered with the Iowa Economic Development Authority to establish a revolving loan fund to finance energy efficiency and other energy projects at city facilities. But the city needed to understand approaches for financing energy projects to achieve both of their goals in a manner that would not be considered debt — in this case, obligations booked as a liability on the city’s balance sheet. With funding from the U.S. Department of Energy’s Climate Action Champions Initiative, Lawrence Berkeley National Laboratory (Berkeley Lab) provided technical assistance to the city to identify strategies to achieve these goals. Revolving loans use a source of money to fund initial cost-saving projects, such as energy efficiency investments, then use the repayments and interest from these loans to support subsequent projects. Berkeley Lab and the city examined two approaches to explore whether revolving loans could potentially be treated as non-debt: 1) financing arrangements containing a non-appropriation clause and 2) shared savings agreements. This fact sheet discusses both, including considerations that may factor into their treatment as debt from an accounting perspective.

Safety analysis of the Los Alamos critical experiments facility

International Nuclear Information System (INIS)

Paxton, H.C.

1975-10-01

The safety of Pajarito Site critical assembly operations depends upon protection built into the facility, upon knowledgeable personnel, and upon good practice as defined by operating procedures and experimental plans. Distance, supplemented by shielding in some cases, would protect personnel against an extreme accident generating 10 19 fissions. During the facility's 28-year history, the direct cost of criticality accidents has translated to a risk of less than $200 per year

Nuclear fuel cycle facilities and RP: the case of Brazil

International Nuclear Information System (INIS)

Tranjan Filho, Alfredo; Costa, Cesar Gustavo S.

2008-01-01

Full text: The renewed nuclear energy scenario, national and worldwide, calls for the strengthening of all activities involving the nuclear fuel production, from uranium extraction at the mines to fuel assemblies delivery at the nuclear power plants, which in Brazil is the mission of the Industrias Nucleares do Brasil (INB). With only a third of its territory prospected, Brazil currently has the sixth largest uranium reserve in the world. Brazil's three main deposits are: the Caldas mine (in the state of Minas Gerais) the first mineral-industrial complex that processed uranium, developed in 1982, and presently being decommissioned; Caetite mine and processing facility (located in the state of Bahia), nowadays operational and with a current production capacity of 400 tonnes per year of uranium concentrates, being in trend of doubling its annual capacity; and the Itataia/Santa Quiteria deposit (in Ceara State), the largest geological uranium reserve in Brazil, although its feasible future production depends on the exploration of the phosphate associated to it. Concerning the nuclear fuel fabrication, INB plant at Resende (in the state of Rio de Janeiro) is responsible for the conversion of Uf 6 to UO 2 the production of fuel pellets and the assembly of the fuel elements, in order to supply the demands of Brazil's two operating PWR (Angra 1 and Angra 2). In addition, in May 2006, INB-Resende inaugurated the uranium enrichment facility, employing the ultra-centrifugation technology. Today still in its first phase of operation, when completed the enrichment facility is intended to provide 100 percent of the domestic requirements, eventually by the year 2015. Detailing present status and future perspectives of INB, in face of the global and national renaissance of nuclear energy, this paper addresses the Radiation Protection (RP) aspects related to INB's achievements and performance, as well as the pressing future challenges to be dealt with, in order to guarantee

Release of radionuclides following severe accident in interim storage facility. Source term determination

International Nuclear Information System (INIS)

Morandi, S.; Mariani, M.; Giacobbo, F.; Covini, R.

2006-01-01

Among the severe accidents that can cause the release of radionuclides from an interim storage facility, with a consequent relevant radiological impact on the population, there is the impact of an aircraft on the facility. In this work, a safety assessment analysis for the case of an aircraft crash into an interim storage facility is tackled. To this aim a methodology, based upon DOE, IAEA and NUREG standard procedures and upon conservative yet realistic hypothesis, has been developed in order to evaluate the total radioactivity, source term, released to the biosphere in consequence of the impact, without recurring to the use of complicated numerical codes. The procedure consists in the identification of the accidental scenarios, in the evaluation of the consequent damage to the building structures and to the waste packages and in the determination of the total release of radionuclides through the building-atmosphere interface. The methodology here developed has been applied to the case of an aircraft crash into an interim storage facility currently under design. Results show that in case of perforation followed by a fire incident the total released activity would be greater of some orders of magnitude with respect to the case of mere perforation. (author)

Insider Threat Case Studies at Radiological and Nuclear Facilities

Energy Technology Data Exchange (ETDEWEB)

Pope, Noah Gale [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hobbs, Christopher [Centre for Science and Security Studies, London (United Kingdom)

2015-04-13

Seven case studies are presented. The cases include thefts of various materials and sabotage. For each case there is an overview of the incident, a timeline, a profile of the perpetrator, and a discussion of the security system failures which allowed the incident to take place.

Insider Threat Case Studies at Radiological and Nuclear Facilities

International Nuclear Information System (INIS)

Pope, Noah Gale; Hobbs, Christopher

2015-01-01

Seven case studies are presented. The cases include thefts of various materials and sabotage. For each case there is an overview of the incident, a timeline, a profile of the perpetrator, and a discussion of the security system failures which allowed the incident to take place.

Safety assessment for radioactive waste disposal facility

International Nuclear Information System (INIS)

Thanaletchumy Karuppiah; Mohd Abdul Wahab Yusof; Nik Marzuki Nik Ibrahim; Nurul Wahida Ahmad Khairuddin

2008-08-01

Safety assessments are used to evaluate the performance of a radioactive waste disposal facility and its impact on human health and the environment. This paper presents the overall information and methodology to carry out the safety assessment for a long term performance of a disposal system. A case study was also conducted to gain hands-on experience in the development and justification of scenarios, the formulation and implementation of models and the analysis of results. AMBER code using compartmental modeling approach was used to represent the migration and fate of contaminants in this training. This safety assessment is purely illustrative and it serves as a starting point for each development stage of a disposal facility. This assessment ultimately becomes more detail and specific as the facility evolves. (Author)

Socio-economic aspects of waste management facilities

International Nuclear Information System (INIS)

Ruetter, H.

2008-01-01

Besides technical aspects and those of safety, it is the economic and social environment of a future underground geologic repository which plays a major role. Compared to other large scale technical plants, facilities for radioactive waste management must overcome incomparably greater obstacles. All the more care must be taken in clarifying the issues affecting the public and the economy in the region of a potential site. On behalf of the Swiss Federal Office for Energy (BFE), Ruetter + Partner conducted a basic study which, in a number of case studies, dealt with the socio-economic aspects of experiences with existing and planned facilities in Switzerland and abroad. The study focused on these main points, which are outlined briefly in the article: - Socio-economic issues in the site selection procedure. - Methodological approach. - Findings made in the case studies. - Factors influencing the acceptance of a repository. (orig.)

Library Facility Siting and Location Handbook. The Greenwood Library Management Collection.

Science.gov (United States)

Koontz, Christine M.

This handbook is a guide to the complex process of library facility siting and location. It includes relevant research and professionals' siting experiences, as well as actual case studies of closures, openings, mergers, and relocations of library facilities. While the bulk of the volume provides practical information, the work also presents an…

Sizing of a wind-hydro system using a reversible hydraulic facility with seawater. A case study in the Canary Islands

International Nuclear Information System (INIS)

Portero, Ulises; Velázquez, Sergio; Carta, José A.

2015-01-01

Highlights: • A model of a wind-hydro system is developed associated to a specific demand. • A particular case on islands with a weak electrical system is simulated. • A reversible seawater-based pumped-hydro system associated to a wind farm is sized. • The economic benefit of the resulting wind-hydro system is calculated. - Abstract: While the climatic conditions of the Canary Islands (Spain) are highly favourable for wind and solar energy exploitation, the low freshwater reserves are a problem when considering the implementation of hydro-based systems. For this reason, the pumped hydro storage (PHS) systems that have been proposed on the islands and which aim to exploit the available freshwater include an additional seawater desalination process. Given this drawback, this paper proposes an original alternative: a reversible PHS facility which directly uses seawater with the system in this case located on the coast of Gran Canaria island. This facility would be used to manage and better integrate the energy generated by a wind farm into a weak insular electrical system. An analysis is also undertaken of the economic benefits the proposed wind-hydro system would entail for the island’s electrical system. As a result of the incorporation of the hydraulic unit, the contribution of the wind-hydro system in satisfying electricity demand is 29% higher than if a wind-only system is used. The electrical energy generation cost of the wind-hydro system amounts to 95.34 €/MW h, entailing an annual saving for the electrical system of 7.68 M€/year.

Spatial development of sports facilities in Hungarian cities of county rank

Directory of Open Access Journals (Sweden)

Kozma Gábor

2016-03-01

Full Text Available Nowadays more and more attention is devoted to the spatial development of the location of sports facilities within cities. The main aim of our paper is to observe the most important spatial characteristics of their development in Hungarian cities of county rank. In these cities three main periods of development of sports facilities can be observed. Larger sports facilities were constructed especially on the edge of cities or in the suburbs, while in the case of smaller facilities a bigger role was played by locations within the city boundaries. As regards the factors influencing the location of sports facilities, the most important role was played by the location of available land areas, besides accessibility and from the mid-1960s links to existing facilities can be mentioned as well.

US DOE surplus facilities management program (SFMP). International technology exchange activities

International Nuclear Information System (INIS)

Broderick, J.

1986-01-01

The Surplus Facilities Management Program is one of five remedial action programs established by the US Department of Energy (DOE) to eliminate potential hazards to the public and environment from radioactive contamination. These programs provide remedial actions at various facilities and sites previously used by the US Government in national atomic energy programs. Included are uranium ore milling sites, nuclear materials production plants, and research and development facilities. The DOE's five remedial action programs are: the Grand Junction Remedial Action Project; the Formerly Utilized Sites Remedial Action Project; the West Valley Demonstration Project; and the Surplus Facilities Management Program. The Surplus Facilities Management Program (SWMP) was established by DOE in 1978. There are presently over 300 shutdown facilities in the SFMP located at sites across the United States and in Puerto Rico. In some cases, remedial action involves decontaminating and releasing a facility for some other use. In other instances, facilities are completely demolished and removed from the site

Facility Location Modeling in Multi-Echelon Distribution System: A Case Study of Indonesian Liquefied Petroleum Gas Supply Chain

Directory of Open Access Journals (Sweden)

Ilyas Masudin

2013-04-01

Full Text Available This paper presents model of Indonesian LPG supply chain by opening new facilities (new echelon taking into account the current facilities. The objective is to investigate the relation between distribution costs such as transportation, inventory cost and facility location in Indonesian multi-echelon LPG supply chain. Fixed-charged capacitated facility location problem is used to determine the optimal solution of the proposed model. In the sensitivity analysis, it is reported that the trade-offs between facility locations and distribution costs are exist. Results report that as the number of facility increases, total transportation and inventory cost also increase.

The System Dynamics Model in Electronic Products Closed-Loop Supply Chain Distribution Network with Three-Way Recovery and the Old-for-New Policy

Directory of Open Access Journals (Sweden)

Xiao-qing Zhang

2016-01-01

Full Text Available With the technological developments and rapid changes in demand pattern, diverse varieties of electronic products are entering into the market with reduced lifecycle which leads to the environmental problems. The awareness of electronic products take-back and recovery has been increasing in electronic products supply chains. In this paper, we build a system dynamics model for electronic products closed-loop supply chain distribution network with the old-for-new policy and three electronic products recovery ways, namely, electronic products remanufacturing, electronic component reuse and remanufacturing, and electronic raw material recovery. In the simulation study, we investigate the significance of various factors including the old-for-new policy, collection and remanufacturing, their interactions and the type of their impact on bullwhip, and profitability through sensitivity analysis. Our results instruct that the old-for-new policy and three electronic products recovery ways can reduce the bullwhip effect in the retailers and the distributors and increases the profitability in the closed-loop supply chain distribution network.

Case study and lessons learned from the ammonium nitrate explosion at the West Fertilizer facility

Energy Technology Data Exchange (ETDEWEB)

Laboureur, Delphine M.; Han, Zhe; Harding, Brian Z.; Pineda, Alba; Pittman, William C.; Rosas, Camilo; Jiang, Jiaojun; Mannan, M. Sam, E-mail: mannan@tamu.edu

2016-05-05

Highlights: • In-depth technical analysis of the West, Texas ammonium nitrate incident. • Regulatory analysis for compliance with federal, state and local regulations. • Facility siting and land use planning implications. • Need for local coordination of risk information and emergency planning. - Abstract: In West, Texas on April 17, 2013, a chemical storage and distribution facility caught fire followed by the explosion of around 30 tons of ammonium nitrate while the emergency responders were trying to extinguish the fire, leading to 15 fatalities and numerous buildings, businesses and homes destroyed or damaged. This incident resulted in devastating consequences for the community around the facility, and shed light on a need to improve the safety management of local small businesses similar to the West facility. As no official report on the findings of the incident has been released yet, this article first investigates the root causes of the incident, and presents a simplified consequence analysis. The article reviews the regulations applicable to this type of facility and recommended emergency response procedures to identify gaps between what happened in West and the current regulations, and discusses how the current regulations could be modified to prevent or minimize future losses. Finally, the federal response that followed the incident until the publication of this paper is summarized.

Case study and lessons learned from the ammonium nitrate explosion at the West Fertilizer facility

International Nuclear Information System (INIS)

Laboureur, Delphine M.; Han, Zhe; Harding, Brian Z.; Pineda, Alba; Pittman, William C.; Rosas, Camilo; Jiang, Jiaojun; Mannan, M. Sam

2016-01-01

Highlights: • In-depth technical analysis of the West, Texas ammonium nitrate incident. • Regulatory analysis for compliance with federal, state and local regulations. • Facility siting and land use planning implications. • Need for local coordination of risk information and emergency planning. - Abstract: In West, Texas on April 17, 2013, a chemical storage and distribution facility caught fire followed by the explosion of around 30 tons of ammonium nitrate while the emergency responders were trying to extinguish the fire, leading to 15 fatalities and numerous buildings, businesses and homes destroyed or damaged. This incident resulted in devastating consequences for the community around the facility, and shed light on a need to improve the safety management of local small businesses similar to the West facility. As no official report on the findings of the incident has been released yet, this article first investigates the root causes of the incident, and presents a simplified consequence analysis. The article reviews the regulations applicable to this type of facility and recommended emergency response procedures to identify gaps between what happened in West and the current regulations, and discusses how the current regulations could be modified to prevent or minimize future losses. Finally, the federal response that followed the incident until the publication of this paper is summarized.

Profile of medical waste management in two healthcare facilities in Lagos, Nigeria: a case study.

Science.gov (United States)

Idowu, Ibijoke; Alo, Babajide; Atherton, William; Al Khaddar, Rafid

2013-05-01

Proper management and safe disposal of medical waste (MW) is vital in the reduction of infection or illness through contact with discarded material and in the prevention of environmental contamination in hospital facilities. The management practices for MW in selected healthcare facilities in Lagos, Nigeria were assessed. The cross-sectional study involved the use of questionnaires, in-depth interviews, focused group discussions and participant observation strategies. It also involved the collection, segregation, identification and weighing of waste types from wards and units in the representative facilities in Lagos, Nigeria, for qualitative and quantitative analysis of the MW streams. The findings indicated that the selected Nigerian healthcare facilities were lacking in the adoption of sound MW management (MWM) practices. The average MW ranged from 0.01 kg/bed/day to 3.98 kg/bed/day. Moreover, about 30% of the domestic waste from the healthcare facilities consisted of MW due to inappropriate co-disposal practices. Multiple linear regression was applied to predict the volume of waste generated giving a correlation coefficient (R(2)) value of 0.99 confirming a good fit of the data. This study revealed that the current MWM practices and strategies in Lagos are weak, and suggests an urgent need for review to achieve vital reversals in the current trends.

Wastewater treatment facilities: Energy efficient improvements and cogeneration

International Nuclear Information System (INIS)

Kunkle, R.; Gray, R.; Delzel, D.

1992-10-01

The Washington State Energy Office (WSEO) has worked with both the Bonneville Power Administration (BPA) and the US Department of Energy to provide technical and financial assistance to local governments. Based on a recent study conducted by Ecotope for WSEO, local governments spend an estimated $45 million on utility bills statewide. Water and wastewater facilities account for almost a third of this cost. As a result, WSEO decided to focus its efforts on the energy intensive water and wastewater sector. The ultimate goal of this project was to develop mechanisms to incorporate energy efficiency improvements into wastewater treatment facilities in retrofits and during upgrades, remodels, and new construction. Project activities included the following: The review of the existing regulatory environment for treatment system construction, A summary of financing options for efficiency improvements in treatment facilities, A literature review of energy efficiency opportunities in treatment plants, Survey and site visits to characterize existing facilities in Washington State, Estimates of the energy efficiency and cogeneration potential in the sector, and A case study to illustrate the implementation of an efficiency improvement in a treatment facility

Consolidating parenting skills in children’s facilities

Directory of Open Access Journals (Sweden)

Ivana Dokoupilová

2016-12-01

Full Text Available The content of this paper is a report on activities in children’s facilities and their ability to influence parenting skills in terms of institutional childcare at an early age. Children’s facilities (infant homes, children’s homes and children’s centres provide comprehensive care for children and parents in cases where, for various reasons, a child’s all-round development is disrupted or their life is in danger. The main purpose of these facilities is to provide adequate childcare as well as to support families when restoring basic functions. On the basis of a survey conducted in children’s facilities, the most frequent difficulties in exercising parenting skills are identified, and subsequently, information on the extent to which children’s facilities contribute to the development of parenting skills and help in the rehabilitation of a family is outlined.

Improving pedestrian facilities in congested urban areas: a case study of Chennai city

Science.gov (United States)

Subramanyam, B.; Prasanna Kumar, R.

2017-07-01

Traffic congestion and lack of public pedestrian space are some problems faced by most urban metropolises. Conventionally walking has been a mode of transportation in Indian cities. The percentage of pedestrians may vary from 16 to 57 depending upon the city. Encounters between vehicular traffic and pedestrian traffic are at its rise currently. Rapid industrialization and urbanization in India has resulted in neglecting of pedestrian facilities. Consequently pedestrian are at greater risk for their safety more especially in the commercial zones of large cities. A change in perspective spotlight will create a sense of awareness that the pedestrian traffic is also vital as the vehicular traffic. Soothing the traffic would moderately cut the driving expediency but the pedestrians will get a much safer and peaceful route to their terminuses. Safety and comfort are the two pans of a balance while considering the pedestrian traffic. Considering these aspects, this study deals a study in improving pedestrian facilities by analysing the existing skeleton of the selected locations. The adequacy of facility is checked based on IRC latest guidelines and counteractive measures are postulated.

A New Hybrid Approach for Augmented Reality Maintenance in Scientific Facilities

Directory of Open Access Journals (Sweden)

Héctor Martínez

2013-09-01

Full Text Available Maintenance in scientific facilities is a difficult issue, especially in large and hazardous facilities, due to the complexity of tasks and equipment. Augmented reality is a technology that has already shown great promise in the maintenance field. With the help of augmented reality applications, maintenance tasks can be carried out faster and more safely. The problem with current applications is that they are small-scale prototypes that do not easily scale to large facility maintenance applications. This paper presents a new hybrid approach that enables the creation of augmented reality maintenance applications for large and hazardous scientific facilities. In this paper, a new augmented reality marker and the algorithm for its recognition is proposed. The performance of the algorithm is verified in three test cases, showing promising results in two of them. Improvements in robustness in the third test case in which the camera is moving quickly or when light conditions are extreme are subject to further studies. The proposed new approach will be integrated into an existing augmented reality maintenance system.

Budaya Keselamatan di Bengkel Perawatan Pesawat Udara pada Garuda Maintenance Facility (GMF AEROASIA)

OpenAIRE

Minda Mora

2011-01-01

Safety is the most important thing in aviation. Safety level has to improved in highest performance. One way to improve safety is to implement safety culture in organization. In case of aviation safety, safety is affected by many factors. Aircraft maintenance is of the factor. The goal of his research is to asess the aviation safety culture in maintenance facilities, case study: Garuda Maintenance Facilities (GMF) using Safety Culture Indicator Scale Measurement System (SCISMS). The Safety Cu...

The accuracy of clinical malaria case reporting at primary health care facilities in Honiara, Solomon Islands

Directory of Open Access Journals (Sweden)

Kunimitsu Ayano

2009-04-01

Full Text Available Abstract Background The accuracy of malaria case reporting is challenging due to restricted human and material resources in many countries. The reporting often depends on the clinical diagnosis because of the scarcity of microscopic examinations. Particularly, clinical malaria case reporting by primary health care facilities (local clinics, which constitutes the baseline data of surveillance, has never previously been sufficiently evaluated. In order to improve the malaria reporting system to the level required to eventually eliminate this disease, this study estimates the gaps between the records of clinics and government statistics regarding the incidence of clinical malaria, and then also examines some factors that might explain the data discrepancy, including such variables as clinic staffing and record keeping. Methods All medical records for outpatients in 2007, handwritten by nurses, were collected from local clinics in Honiara, the capital of the Solomon Islands. The all-monthly clinical malaria cases were then recalculated. The corresponding monthly data in official statistics were provided by the government. Next, in order to estimate any data discrepancy, the ratio of the cases recorded at clinics to the cases reported to the government was determined on the monthly basis. Finally, the associations between the monthly discrepancy and other variables were evaluated by a multiple regression analysis. Results The mean data discrepancy between the records of clinics and government statistics was 21.2% (n = 96. Significant associations were observed between the discrepancy and the average number of patients (coefficient: 0.05, 95%CI: 0.31, 0.07, illegible handwriting (coefficient: 0.09, 95%CI: 0.04, 0.15, the use of tally sheets (coefficient:-0.38, 95%CI: -0.54, -0.22, and the clinic level (coefficient:-0.48, 95%CI:-0.89,-0.06. Conclusion The findings of this study demonstrate the huge data discrepancy between the records of clinics and

NASA Glenn's Single-Stage Axial Compressor Facility Upgraded

Science.gov (United States)

Brokopp, Richard A.

2004-01-01

NASA Glenn Research Center's Single-Stage Axial Compressor Facility was upgraded in fiscal year 2003 to expand and improve its research capabilities for testing high-speed fans and compressors. The old 3000-hp drive motor and gearbox were removed and replaced with a refurbished 7000-hp drive motor and gearbox, with a maximum output speed of 21,240 rpm. The higher horsepower rating permits testing of fans and compressors with higher pressure ratio or higher flow. A new inline torquemeter was installed to provide an alternate measurement of fan and compressor efficiency, along with the standard pressure and temperature measurements. A refurbished compressor bearing housing was also installed with bidirectional rotation capability, so that a variety of existing hardware could be tested. Four new lubrication modules with backup capability were installed for the motor, gearbox, torquemeter, and compressor bearing housing, so that in case the primary pump fails, the backup will prevent damage to the rotating hardware. The combustion air supply line for the facility inlet air system was activated to provide dry air for repeatable inlet conditions. New flow conditioning hardware was installed in the facility inlet plenum tank, which greatly reduced the inlet turbulence. The new inlet can also be easily modified to accommodate 20- or 22-in.-diameter fans and compressors, so a variety of existing hardware from other facilities (such as Glenn's 9- by 15-Foot Low-Speed Wind Tunnel) can be tested in the Single-Stage Axial Compressor Facility. An exhaust line was also installed to provide bleed capability to remove the inlet boundary layer. To improve the operation and control of the facility, a new programmable logic controller (PLC) was installed to upgrade from hardwired relay logic to software logic. The PLC also enabled the usage of human-machine interface software to allow for easier operation of the facility and easier reconfiguration of the facility controls when

Approaches relating to decommissioning of nuclear facilities. Peer discussions on regulatory practices

International Nuclear Information System (INIS)

1998-04-01

This report arises from the fifth series of peer discussions on regulatory practices entitled 'Approaches relating to decommissioning of nuclear facilities'. Senior regulators from 22 Member States participated in three peer group discussions during 1996-1997. This report presents the outcome of these meetings and recommendations of good practices identified by senior regulators, which do not necessarily reflect those of the governments of the nominating Member States, the nominating organizations, nor the IAEA. In many Member States nuclear facilities such as power and research reactors, nuclear fuel cycle facilities and various industrial and medical facilities have reached the end of their useful life or will reach it in the near future. These facilities need to be safely decommissioned without causing any undue radiological, chemical or other risks to workers, the public and the environment. Today, there is a growing consensus that decommissioning needs to be given consideration from the design phase of a new facility and that planning for decommissioning is to be carried out during the entire life of the nuclear facility. In most Member States, there is no comprehensive set of requirements, be it on a legal or technical level, available to plan, assess, approve and carry out decommissioning operations. Since most of the facilities to be decommissioned in the near future are demonstration or prototype facilities, case by case specific and prescriptive requirements will have to be developed. However, such case by case requirements need to be based on existing applicable regulations as well as on generally accepted principles. In order to assist Member States in ensuring safe decommissioning operations, the IAEA has convened the fifth series of peer discussions on 'Approaches relating to decommissioning of nuclear facilities'. The results and findings of these discussions are summarized in this report, concentrating on recommendations and established good

Approaches relating to decommissioning of nuclear facilities. Peer discussions on regulatory practices

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-04-01

This report arises from the fifth series of peer discussions on regulatory practices entitled 'Approaches relating to decommissioning of nuclear facilities'. Senior regulators from 22 Member States participated in three peer group discussions during 1996-1997. This report presents the outcome of these meetings and recommendations of good practices identified by senior regulators, which do not necessarily reflect those of the governments of the nominating Member States, the nominating organizations, nor the IAEA. In many Member States nuclear facilities such as power and research reactors, nuclear fuel cycle facilities and various industrial and medical facilities have reached the end of their useful life or will reach it in the near future. These facilities need to be safely decommissioned without causing any undue radiological, chemical or other risks to workers, the public and the environment. Today, there is a growing consensus that decommissioning needs to be given consideration from the design phase of a new facility and that planning for decommissioning is to be carried out during the entire life of the nuclear facility. In most Member States, there is no comprehensive set of requirements, be it on a legal or technical level, available to plan, assess, approve and carry out decommissioning operations. Since most of the facilities to be decommissioned in the near future are demonstration or prototype facilities, case by case specific and prescriptive requirements will have to be developed. However, such case by case requirements need to be based on existing applicable regulations as well as on generally accepted principles. In order to assist Member States in ensuring safe decommissioning operations, the IAEA has convened the fifth series of peer discussions on 'Approaches relating to decommissioning of nuclear facilities'. The results and findings of these discussions are summarized in this report, concentrating on recommendations and established good

Demonstration of anticoagulation patient self-testing feasibility at an Indian Health Service facility: A case series analysis

Directory of Open Access Journals (Sweden)

Schupbach RR

2013-03-01

Full Text Available Background: Anticoagulation patient self-testing (PST represents an alternative approach to warfarin monitoring by enabling patients to use coagulometers to test their international normalized ratio (INR values. PST offers several advantages that potentially improve warfarin management. Objective: To describe implementation and associated performance of a PST demonstration program at an Indian Health Service (IHS facility. Methods: A non-consecutive case series analysis of patients from a pharmacy-managed PST demonstration program was performed at an IHS facility in Oklahoma between July 2008 and February 2009.Results: Mean time in therapeutic range (TTR for the seven patients showed a small, absolute increase during the twelve weeks of PST compared to the twelve weeks prior to PST. Four of the seven patients had an increase in TTR during the twelve week course of PST compared to their baseline TTR. Three of four patients with increased TTR in the final eight week period of PST achieved a TTR of 100%. Of the three patients who experienced a decrease in TTR after initiating self-testing, two initially presented with a TTR of 100% prior to PST and one patient had a TTR of 100% for the final eight weeks of PST. The two patients not achieving a TTR of 100% during the twelve week PST period demonstrated an increase in TTR following the first four weeks of PST. Conclusion: Although anticoagulation guidelines now emphasize patient self-management (PSM only, optimal PST remains an integral process in PSM delivery. In the patients studied, the results of this analysis suggest that PST at the IHS facility provided a convenient, alternative method for management of chronic warfarin therapy for qualified patients. More than half of the patients demonstrated improvement in TTR. Although there is a learning curve immediately following PST initiation, the mean TTR for the entire PST period increased modestly when compared to the time period prior to PST.

The PANDA facility and first test results

International Nuclear Information System (INIS)

Dreier, J.; Huggenberger, M.; Aubert, C.; Bandurski, T.; Fischer, O.; Healzer, J.; Lomperski, S.; Strassberger, H.J.; Varadi, G.; Yadigaroglu, G.

1996-01-01

The PANDA test facility at the Paul Scherrer Institute is used to study the long-term performance of the Simplified Boiling Water Reactor's passive containment cooling system. The PANDA tests demonstrate performance on a larger scale than previous tests and examine the effects of any non-uniform spatial distributions of steam and non-condensable gases in the system. The facility is in 1:1 vertical scale and 1:25 scale for volume, power etc. Extensive facility characterization tests and steady-state passive containment condenser performance tests are presented. The results of the base case test of a series of transient system behaviour tests are reviewed. The first PANDA tests exhibited reproducibility, and indicated that the Simplified Boiling Water Reactor's containment is likely to be favorably responsive and highly robust to changes in the thermal transport patterns. (orig.) [de

Evaluation methods for hospital facilities

DEFF Research Database (Denmark)

Fronczek-Munter, Aneta

2013-01-01

according to focus areas and proposes which evaluation methods to use in different building phases of healthcare facilities. Hospital evaluations with experts and users are also considered; their subjective view on space, function, technology, usability and aesthetics. Results & solutions: This paper...... presents the different methods for evaluating buildings in use in a new model, the Evaluation Focus Flower, and proposes which evaluation methods are suitable for various aims and building phases, i.e. which is giving best input for the initial briefing process of new hospital facilities with ambition...... of creating buildings with enhanced usability. Additionally various evaluation methods used in hospital cases in Denmark and Norway are presented. Involvement of users is proposed, not just in defining requirements but also in co-creation/design and evaluation of solutions. The theories and preliminary...

High intensity neutrino oscillation facilities in Europe

CERN Document Server

Edgecock, T.R.; Davenne, T.; Densham, C.; Fitton, M.; Kelliher, D.; Loveridge, P.; Machida, S.; Prior, C.; Rogers, C.; Rooney, M.; Thomason, J.; Wilcox, D.; Wildner, E.; Efthymiopoulos, I.; Garoby, R.; Gilardoni, S.; Hansen, C.; Benedetto, E.; Jensen, E.; Kosmicki, A.; Martini, M.; Osborne, J.; Prior, G.; Stora, T.; Melo-Mendonca, T.; Vlachoudis, V.; Waaijer, C.; Cupial, P.; Chancé, A.; Longhin, A.; Payet, J.; Zito, M.; Baussan, E.; Bobeth, C.; Bouquerel, E.; Dracos, M.; Gaudiot, G.; Lepers, B.; Osswald, F.; Poussot, P.; Vassilopoulos, N.; Wurtz, J.; Zeter, V.; Bielski, J.; Kozien, M.; Lacny, L.; Skoczen, B.; Szybinski, B.; Ustrzycka, A.; Wroblewski, A.; Marie-Jeanne, M.; Balint, P.; Fourel, C.; Giraud, J.; Jacob, J.; Lamy, T.; Latrasse, L.; Sortais, P.; Thuillier, T.; Mitrofanov, S.; Loiselet, M.; Keutgen, Th.; Delbar, Th.; Debray, F.; Trophine, C.; Veys, S.; Daversin, C.; Zorin, V.; Izotov, I.; Skalyga, V.; Burt, G.; Dexter, A.C.; Kravchuk, V.L.; Marchi, T.; Cinausero, M.; Gramegna, F.; De Angelis, G.; Prete, G.; Collazuol, G.; Laveder, M.; Mazzocco, M.; Mezzetto, M.; Signorini, C.; Vardaci, E.; Di Nitto, A.; Brondi, A.; La Rana, G.; Migliozzi, P.; Moro, R.; Palladino, V.; Gelli, N.; Berkovits, D.; Hass, M.; Hirsh, T.Y.; Schaumann, M.; Stahl, A.; Wehner, J.; Bross, A.; Kopp, J.; Neuffer, D.; Wands, R.; Bayes, R.; Laing, A.; Soler, P.; Agarwalla, S.K.; Cervera Villanueva, A.; Donini, A.; Ghosh, T.; Gómez Cadenas, J.J.; Hernández, P.; Martín-Albo, J.; Mena, O.; Burguet-Castell, J.; Agostino, L.; Buizza-Avanzini, M.; Marafini, M.; Patzak, T.; Tonazzo, A.; Duchesneau, D.; Mosca, L.; Bogomilov, M.; Karadzhov, Y.; Matev, R.; Tsenov, R.; Akhmedov, E.; Blennow, M.; Lindner, M.; Schwetz, T.; Fernández Martinez, E.; Maltoni, M.; Menéndez, J.; Giunti, C.; González García, M. C.; Salvado, J.; Coloma, P.; Huber, P.; Li, T.; López-Pavón, J.; Orme, C.; Pascoli, S.; Meloni, D.; Tang, J.; Winter, W.; Ohlsson, T.; Zhang, H.; Scotto-Lavina, L.; Terranova, F.; Bonesini, M.; Tortora, L.; Alekou, A.; Aslaninejad, M.; Bontoiu, C.; Kurup, A.; Jenner, L.J.; Long, K.; Pasternak, J.; Pozimski, J.; Back, J.J.; Harrison, P.; Beard, K.; Bogacz, A.; Berg, J.S.; Stratakis, D.; Witte, H.; Snopok, P.; Bliss, N.; Cordwell, M.; Moss, A.; Pattalwar, S.; Apollonio, M.

2013-02-20

The EUROnu project has studied three possible options for future, high intensity neutrino oscillation facilities in Europe. The first is a Super Beam, in which the neutrinos come from the decay of pions created by bombarding targets with a 4 MW proton beam from the CERN High Power Superconducting Proton Linac. The far detector for this facility is the 500 kt MEMPHYS water Cherenkov, located in the Fr\\'ejus tunnel. The second facility is the Neutrino Factory, in which the neutrinos come from the decay of {\\mu}+ and {\\mu}- beams in a storage ring. The far detector in this case is a 100 kt Magnetised Iron Neutrino Detector at a baseline of 2000 km. The third option is a Beta Beam, in which the neutrinos come from the decay of beta emitting isotopes, in particular 6He and 18Ne, also stored in a ring. The far detector is also the MEMPHYS detector in the Fr\\'ejus tunnel. EUROnu has undertaken conceptual designs of these facilities and studied the performance of the detectors. Based on this, it has determined the ph...

Quality of caesarean delivery services and documentation in first-line referral facilities in Afghanistan: a chart review

Directory of Open Access Journals (Sweden)

Kim Young-Mi

2012-03-01

Full Text Available Abstract Background Increasing appropriate use and documentation of caesarean section (CS has the potential to decrease maternal and perinatal mortality in settings with low CS rates. We analyzed data collected as part of a comprehensive needs assessment of emergency obstetric and newborn care (EmONC facilities in Afghanistan to gain a greater understanding of the clinical indications, timeliness, and outcomes of CS deliveries. Methods Records were reviewed at 78 government health facilities expected to function as EmONC providers that were located in secure areas of the country. Information was collected on the three most recent CS deliveries in the preceding 12 months at facilities with at least one CS delivery in the preceding three months. After excluding 16 facilities with no recent CS deliveries, the sample includes 173 CS deliveries at 62 facilities. Results No CS deliveries were performed in the previous three months at 21% of facilities surveyed; all of these were lower-level facilities. Most CS deliveries (88% were classified as emergencies, and only 12% were referrals from another facility. General anesthesia was used in 62% of cases, and spinal or epidural anesthesia in 34%. Only 28% of cases were managed with a partograph. Surgery began less than one hour after the decision for a CS delivery in just 30% of emergency cases. Among the 173 cases, 27 maternal deaths, 28 stillbirths, and 3 early neonatal deaths were documented. In cases of maternal and fetal death, the most common indications for CS delivery were placenta praevia or abruption and malpresentation. In 62% of maternal deaths, the fetus was stillborn or died shortly after birth. In 48% of stillbirths, the fetus had a normal heart rate at the last check. Information on partograph use was missing in 38% of cases, information on parity missing in 23% of cases and indications for cesareans missing in 9%. Conclusions Timely referral within and to EmONC facilities would decrease

Value Adding Management: A New Facilities Management Concept

DEFF Research Database (Denmark)

Jensen, Per Anker; Katchamart, Akarapong

2011-01-01

Purpose: To investigate how Facilities Management (FM) can add value and develop a management concept that can assist facilities managers in implementing value adding strategies and practices. Theory: The study is based on the management model for FM included in the European FM standards, recent...... is investigated, tested and discussed based on a case study of an international corporation. Findings: The study shows that the management model for FM creates a relevant starting point but also that stakeholder and relationship management is an essential aspect of Value Adding Management. The case study confirms...... the relevance of the basic concept and provides an important example of how Value Adding Management can be implemented and added value measured. Originality/value: The study develops a concept of Value Adding Management, which is new in FM literature. It is expected to increase the awareness of the impacts...

Determinants of maternal near miss among women in public hospital maternity wards in Northern Ethiopia: A facility based case-control study.

Directory of Open Access Journals (Sweden)

Dejene Ermias Mekango

Full Text Available In Ethiopia, 20,000 women die each year from complications related to pregnancy, childbirth and post-partum. For every woman that dies, 20 more experience injury, infection, disease, or disability. "Maternal near miss" (MNM, defined by the World Health Organization (WHO as a woman who nearly dies, but survives a complication during pregnancy, childbirth or within 42 days of a termination, is a proxy indicator of maternal mortality and quality of obstetric care. In Ethiopia, few studies have examined MNM. This study aims to identify determinants of MNM among a small population of women in Tigray, Ethiopia.Unmatched case-control study was conducted in hospitals in Tigray Region, Northern Ethiopia, from January 30-March 30, 2016. The sample included 103 cases and 205 controls recruited from among women seeking obstetric care at six (6 public hospitals. Clients with life-threatening obstetric complications, including hemorrhage, hypertensive diseases of pregnancy, dystocia, infection, and anemia or clinical signs of severe anemia (in women without hemorrhage were taken as cases and those with normal obstetric outcomes were controls. Cases were selected based on proportion to size allocation while systematic sampling was employed for controls. Binary and multiple variable logistic regression ("odds ratio" analyses were calculated at 95% CI.Roughly 90% of cases and controls were married and 25% experienced their first pregnancy before the age of 16 years. About two-thirds of controls and 45.6% of cases had gestational ages between 37-41 weeks. Among cases, severe obstetric hemorrhage (44.7%, hypertensive disorders (38.8%, dystocia (17.5%, sepsis (9.7% and severe anemia (2.9% were leading causes of MNM. Histories of chronic maternal medical problems like hypertension, diabetes were reported in 55.3% of cases and 33.2% of controls. Women with no formal education [AOR = 3.2;95%CI:1.24, 8.12], being less than 16 years of age at first pregnancy [AOR = 2

Safety assessment of a vault-based disposal facility using the ISAM methodology

International Nuclear Information System (INIS)

Kelly, E.; Kim, C.-L.; Lietava, P.; Little, R.; Simon, I.

2002-01-01

As part of the IAEA's Co-ordinated Research Project (CRP) on Improving Long-term of Safety Assessment Methodologies for Near Surface Waste Disposal Facilities (ISAM), three example cases were developed. The aim was to testing the ISAM safety assessment methodology using as realistic as possible data. One of the Test Cases, the Vault Test Case (VTC), related to the disposal of low level radioactive waste (LLW) to a hypothetical facility comprising a set of above surface vaults. This paper uses the various steps of the ISAM safety assessment methodology to describe the work undertaken by ISAM participants in developing the VTC and provides some general conclusions that can be drawn from the findings of their work. (author)

Facility effluent monitoring plan determinations for the 400 Area facilities

International Nuclear Information System (INIS)

Nickels, J.M.

1991-09-01

This Facility Effluent Monitoring Plan determination resulted from an evaluation conducted for the Westinghouse Hanford Company 400 Area facilities on the Hanford Site. The Facility Effluent Monitoring Plan determinations have been prepared in accordance with A Guide for Preparing Hanford Site Facility Effluent Monitoring Plans. Two major Westinghouse Hanford Company facilities in the 400 Area were evaluated: the Fast Flux Test Facility and the Fuels Manufacturing and examination Facility. The determinations were prepared by Westinghouse Hanford Company. Of these two facilities, only the Fast Flux Test Facility will require a Facility Effluent Monitoring Plan. 7 refs., 5 figs., 4 tabs

Energy Efficiency Strategies for Municipal Wastewater Treatment Facilities

Energy Technology Data Exchange (ETDEWEB)

Daw, J.; Hallett, K.; DeWolfe, J.; Venner, I.

2012-01-01

Water and wastewater systems are significant energy consumers with an estimated 3%-4% of total U.S. electricity consumption used for the movement and treatment of water and wastewater. Water-energy issues are of growing importance in the context of water shortages, higher energy and material costs, and a changing climate. In this economic environment, it is in the best interest for utilities to find efficiencies, both in water and energy use. Performing energy audits at water and wastewater treatment facilities is one way community energy managers can identify opportunities to save money, energy, and water. In this paper the importance of energy use in wastewater facilities is illustrated by a case study of a process energy audit performed for Crested Butte, Colorado's wastewater treatment plant. The energy audit identified opportunities for significant energy savings by looking at power intensive unit processes such as influent pumping, aeration, ultraviolet disinfection, and solids handling. This case study presents best practices that can be readily adopted by facility managers in their pursuit of energy and financial savings in water and wastewater treatment. This paper is intended to improve community energy managers understanding of the role that the water and wastewater sector plays in a community's total energy consumption. The energy efficiency strategies described provide information on energy savings opportunities, which can be used as a basis for discussing energy management goals with water and wastewater treatment facility managers.

The Origin and Constitution of Facilities Management as an integrated corporate fuction

DEFF Research Database (Denmark)

Jensen, Per Anker

2008-01-01

Purpose – To understand how facilities management (FM) has evolved over time in a complex public corporation from internal functions of building operation and building client and the related service functions to become an integrated corporate function. Design/methodology/approach – The paper...... is based on results from a research project on space strategies and building values, which included a major longitudinal case study of the development of facilities for the Danish Broadcasting Corporation (DR) over time. The research presented here included literature studies, archive studies...... and a fully integrated corporate Facilities Management function are established. Research limitations/implications – The paper presents empirical evidence of the historical development ofFMfrom one case and provides a deeper understanding of the integration processes that are crucial to FM and which can...

The National Analysis Facility at DESY - status and use cases by the participating experiments

Science.gov (United States)

Aplin, S.; Ehrenfeld, W.; Haupt, A.; Kemp, Y.; Langenbruch, C.; Leffhalm, K.; Lucaci-Timoce, A.; Stadie, H.

2011-12-01

The German National Analysis Facility (NAF) was set up at DESY, starting end of 2007 in the context of the Helmholtz Alliance "Physics at the Terascale". The NAF complements the DESY and the German Grid resources, and hence offers users from the German HEP institutes the best possible environment for data analysis. In the first part, the key aspects and components of the NAF are briefly presented with an emphasis on recent improvements. In the second part, the use cases of the three participating LHC experiments, ATLAS, CMS and LHCb, will be presented. Differences and commonalities in the usage of the NAF will be shown. Special emphasis will be placed on the usage of PROOF, whose usage on the NAF has been pioneered by CMS. It is now adapted by ATLAS. The third part will concentrate on how the NAF was used for detector optimisation studies in the preparation of one of the ILC Lol's (ILD 2009), as well as how CALICE uses the NAF for the analysis of their data taken in several test beam experiments performed for detector R & D. Finally, future developments of the NAF are presented.

The National Analysis Facility at DESY - status and use cases by the participating experiments

International Nuclear Information System (INIS)

Aplin, S; Ehrenfeld, W; Haupt, A; Kemp, Y; Leffhalm, K; Lucaci-Timoce, A; Langenbruch, C; Stadie, H

2011-01-01

The German National Analysis Facility (NAF) was set up at DESY, starting end of 2007 in the context of the Helmholtz Alliance 'Physics at the Terascale'. The NAF complements the DESY and the German Grid resources, and hence offers users from the German HEP institutes the best possible environment for data analysis. In the first part, the key aspects and components of the NAF are briefly presented with an emphasis on recent improvements. In the second part, the use cases of the three participating LHC experiments, ATLAS, CMS and LHCb, will be presented. Differences and commonalities in the usage of the NAF will be shown. Special emphasis will be placed on the usage of PROOF, whose usage on the NAF has been pioneered by CMS. It is now adapted by ATLAS. The third part will concentrate on how the NAF was used for detector optimisation studies in the preparation of one of the ILC Lol's (ILD 2009), as well as how CALICE uses the NAF for the analysis of their data taken in several test beam experiments performed for detector R and D. Finally, future developments of the NAF are presented.

Realizing Sustainability in Facilities Management: a pilot study at the Technical University of Denmark

DEFF Research Database (Denmark)

Nielsen, Susanne Balslev; Møller, Jacob Steen; Jäschke, Stefan

2012-01-01

, qualitative research and the preliminary analysis of a single, pilot case study of The Technical University of Denmark. Progress with the other complementary cases will be included in the presentation. The cases should be supplemented by more research on sustainable facilities management. Originality......, stakeholder interviews, focus groups, usability evaluations and practice-research workshops. The Technical University of Denmark (DTU) is the pilot case of an international collaboration, and more studies are planned to follow. Findings: The paper presents a framework for qualitative research on Sustainable...... Facilities Management (SFM), which can guide future research on Sustainability in FM and increase comparability between case studies. The research identifies the challenges and opportunities for integrating ecological, social and economical sustainability in university FM. The paper presents the analysis...

Strategy selection for the decommissioning of nuclear facilities

International Nuclear Information System (INIS)

2004-01-01

As modern nuclear power programmes mature and large, commercial nuclear power plants and fuel cycle facilities approach the end of their useful life by reason of age, economics or change of policy on the use of nuclear power, new challenges associated with decommissioning and dismantling come to the fore. Politicians and the public may expect there to be a 'right answer' to the choice of strategy for a particular type of facility, or even all facilities. Both this seminar and wider experience show that this is not the case. Local factors and national political positions have a significant input and often result in widely differing strategy approaches to broadly similar decommissioning projects. All facility owners represented at the seminar were able to demonstrate a rational process for strategy selection and compelling arguments for the choices made. In addition to the papers that were presented, these proceedings include a summary of the discussions that took place. (author)

Education facilities and motivation of teachers & students at ...

African Journals Online (AJOL)

Education facilities and motivation of teachers & students at correction centers: the case of Goba, Delomena and Sheshamene Oromia in Ethiopia. ... Goba Correction School had better education services. More specifically ... Keywords: Correction Centers, prison, education, teachers' and students' motivation, Ethiopia ...

Technical Cybersecurity Controls for Nuclear Facilities

International Nuclear Information System (INIS)

Oh, Jinseok; Ryou, Jaecheol; Kim, Youngmi; Jeong, Choonghei

2014-01-01

To strengthen cybersecurity for nuclear facilities, many countries take a regulatory approach. For example, US Government issued several regulations . Title 10, of the Code of Federal Regulations, Section 73.54, 'Protection of Digital Computer and Communication Systems and Networks (10 CFR 73.54) for cybersecurity requirements and Regulatory Guide 5.71 (RG. 5.71) for cybersecurity guidance and so on. In the case of Korea, Korean Government issued '8.22 Cybersecurity of I and C systems (KINS/RG-NO8.22). In particular, Reg. 5.71 provides a list of security controls to address the potential cyber risks to a nuclear facilities. Implementing and adopting security controls, we can improve the level of cybersecurity for nuclear facilities. RG 5.71 follows the recommendation of NIST SP 800-53. NIST standard provides security controls for IT systems. And NRC staff tailored the controls in NIST standards to unique environments of nuclear facilities. In this paper, we are going to analysis and compare NRC RG 5.71 and NIST SP800-53, in particular, for technical security controls. If RG 5.71 omits the specific security control that is included in SP800-53, we would review that omitting is adequate or not. If RG 5.71 includes the specific security control that is not included in SP800-53, we would also review the rationale. And we are going to some security controls to strengthen cybersecurity of nuclear facilities. In this paper, we compared and analyzed of two regulation in technical security controls. RG 5.71 that is based on NIST standard provides well-understood security controls for nuclear facility. But some omitting from NIST standard can threaten security state of nuclear facility

Technical Cybersecurity Controls for Nuclear Facilities

Energy Technology Data Exchange (ETDEWEB)

Oh, Jinseok; Ryou, Jaecheol [Chungnam National Univ., Daejeon (Korea, Republic of); Kim, Youngmi; Jeong, Choonghei [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2014-05-15

To strengthen cybersecurity for nuclear facilities, many countries take a regulatory approach. For example, US Government issued several regulations . Title 10, of the Code of Federal Regulations, Section 73.54, 'Protection of Digital Computer and Communication Systems and Networks (10 CFR 73.54) for cybersecurity requirements and Regulatory Guide 5.71 (RG. 5.71) for cybersecurity guidance and so on. In the case of Korea, Korean Government issued '8.22 Cybersecurity of I and C systems (KINS/RG-NO8.22). In particular, Reg. 5.71 provides a list of security controls to address the potential cyber risks to a nuclear facilities. Implementing and adopting security controls, we can improve the level of cybersecurity for nuclear facilities. RG 5.71 follows the recommendation of NIST SP 800-53. NIST standard provides security controls for IT systems. And NRC staff tailored the controls in NIST standards to unique environments of nuclear facilities. In this paper, we are going to analysis and compare NRC RG 5.71 and NIST SP800-53, in particular, for technical security controls. If RG 5.71 omits the specific security control that is included in SP800-53, we would review that omitting is adequate or not. If RG 5.71 includes the specific security control that is not included in SP800-53, we would also review the rationale. And we are going to some security controls to strengthen cybersecurity of nuclear facilities. In this paper, we compared and analyzed of two regulation in technical security controls. RG 5.71 that is based on NIST standard provides well-understood security controls for nuclear facility. But some omitting from NIST standard can threaten security state of nuclear facility.

Investigating Public Facility Characteristics from a Spatial Interaction Perspective: A Case Study of Beijing Hospitals Using Taxi Data

Directory of Open Access Journals (Sweden)

Xiaoqing Kong

2017-02-01

Full Text Available Services provided by public facilities are essential to people’s lives and are closely associated with human mobility. Traditionally, public facility access characteristics, such as accessibility, equity issues and service areas, are investigated mainly based on static data (census data, travel surveys and particular records, such as medical records. Currently, the advent of big data offers an unprecedented opportunity to obtain large-scale human mobility data, which can be used to study the characteristics of public facilities from the spatial interaction perspective. Intuitively, spatial interaction characteristics and service areas of different types and sizes of public facilities are different, but how different remains an open question, so we, in turn, examine this question. Based on spatial interaction, we classify public facilities and explore the differences in facilities. In the research, based on spatial interaction extracted from taxi data, we introduce an unsupervised classification method to classify 78 hospitals in 6 districts of Beijing, and the results better reflect the type of hospital. The findings are of great significance for optimizing the spatial configuration of medical facilities or other types of public facilities, allocating public resources reasonably and relieving traffic pressure.

Operational and safety requirement of radiation facility

International Nuclear Information System (INIS)

Zulkafli Ghazali

2007-01-01

Gamma and electron irradiation facilities are the most common industrial sources of ionizing radiation. They have been used for medical, industrial and research purposes since the 1950s. Currently there are more than 160 gamma irradiation facilities and over 600 electron beam facilities in operation worldwide. These facilities are either used for the sterilization of medical and pharmaceutical products, the preservation of foodstuffs, polymer synthesis and modification, or the eradication of insect infestation. Irradiation with electron beam, gamma ray or ultra violet light can also destroy complex organic contaminants in both liquid and gaseous waste. EB systems are replacing traditional chemical sterilization methods in the medical supply industry. The ultra-violet curing facility, however, has found more industrial application in printing and furniture industries. Gamma and electron beam facilities produce very high dose rates during irradiation, and thus there is a potential of accidental exposure in the irradiation chamber which can be lethal within minutes. Although, the safety record of this industry has been relatively very good, there have been fatalities recorded in Italy (1975), Norway (1982), El Salvador (1989) and Israel (1990). Precautions against uncontrolled entry into irradiation chamber must therefore be taken. This is especially so in the case of gamma irradiation facilities those contain large amounts of radioactivity. If the mechanism for retracting the source is damaged, the source may remain exposed. This paper will, to certain extent, describe safety procedure and system being installed at ALURTRON, Nuclear Malaysia to eliminate accidental exposure of electron beam irradiation. (author)

Mathematical Models of IABG Thermal-Vacuum Facilities

Science.gov (United States)

Doring, Daniel; Ulfers, Hendrik

2014-06-01

IABG in Ottobrunn, Germany, operates thermal-vacuum facilities of different sizes and complexities as a service for space-testing of satellites and components. One aspect of these tests is the qualification of the thermal control system that keeps all onboard components within their save operating temperature band. As not all possible operation / mission states can be simulated within a sensible test time, usually a subset of important and extreme states is tested at TV facilities to validate the thermal model of the satellite, which is then used to model all other possible mission states. With advances in the precision of customer thermal models, simple assumptions of the test environment (e.g. everything black & cold, one solar constant of light from this side) are no longer sufficient, as real space simulation chambers do deviate from this ideal. For example the mechanical adapters which support the spacecraft are usually not actively cooled. To enable IABG to provide a model that is sufficiently detailed and realistic for current system tests, Munich engineering company CASE developed ESATAN models for the two larger chambers. CASE has many years of experience in thermal analysis for space-flight systems and ESATAN. The two models represent the rather simple (and therefore very homogeneous) 3m-TVA and the extremely complex space simulation test facility and its solar simulator. The cooperation of IABG and CASE built up extensive knowledge of the facilities thermal behaviour. This is the key to optimally support customers with their test campaigns in the future. The ESARAD part of the models contains all relevant information with regard to geometry (CAD data), surface properties (optical measurements) and solar irradiation for the sun simulator. The temperature of the actively cooled thermal shrouds is measured and mapped to the thermal mesh to create the temperature field in the ESATAN part as boundary conditions. Both models comprise switches to easily

The Effectiveness of Urban Green Spaces and Socio-Cultural Facilities

Directory of Open Access Journals (Sweden)

Mehmet Faruk Altunkasa

2017-04-01

Full Text Available This paper aims to develop a theoretical approach for mapping and determining the effectiveness of green spaces and socio-cultural facilities as providers of urban ecosystem services and urban services in the case of Adana, Turkey. Firstly, green spaces and socio-cultural facilities per capita have been determined and indexed for the neighbourhoods in the city. Then, a distance-based method for estimating the effectiveness of these facilities was used. The distances between the various neighbourhoods and between a given facility and the farthest threshold have been measured and these values have been used to determine the facility effectiveness change value for each neighbourhood. Then, effective values have been calculated and indexed by incorporating the green space and socio-cultural facility values and the effectiveness change values for the neighbourhoods. Finally, point-based effective green spaces and socio-cultural facilities index values have been converted to continuous surface values in a GIS (geographic information system environment in order to utilize as a base map for urban physical planning purposes. According to the outcomes of this study, the distribution of green spaces and socio-cultural facilities of the neighbourhoods are imbalanced and index values of these facilities range in between 45 and 84 out of 100.

The radiological accident at the irradiation facility in Nesvizh

International Nuclear Information System (INIS)

1996-01-01

More than 40 years of experience in radiation processing has shown that such technology is generally used safely, and steady improvement in the design of facilities and careful selection and training of operators have contributed to this good safety record. However, some cases of circumvention of safety systems have been registered and it is documented that the consequences of radiological accidents at industrial radiation facilities can be extremely serious. The causes of accidents may have some points in common, but at the same time may be highly specific. A detailed study of these common and specific features seems to be of great importance for further improvements in safety systems. One such event occurred on 26 October 1991 at an industrial sterilization facility in Nesvizh, Belarus, when the operator entered the irradiation chamber and was severely exposed to a lethal dose of radiation. The significant feature of this case was related to the medical management. It should be underlined that some circumstances of the accident only came to light during the post-accident review made by the IAEA. To document the causes and consequences of the accident and to define the lessons learned are of help to those people with responsibility for the safety of such facilities and to those medical authorities who might be involved in the management of a radiation event. 16 refs, figs, tabs, photographs

Decision-Making for Risk Management in Sustainable Renewable Energy Facilities: A Case Study in the Dominican Republic

Directory of Open Access Journals (Sweden)

Guido C. Guerrero-Liquet

2016-05-01

Full Text Available Today, Renewable Energy Sources (RES are a key pillar to achieving sustainable development, which is the main reason why energy projects are being carried out not only in developed countries but also in many emerging countries. Since the technical and financial risk remains a major barrier to financing renewable energy projects, several mechanisms are available to reduce risks on investment into clean energy projects. This paper discusses risk management tools in solar photovoltaic facilities based on the guide to the Project Management (PMBOK Guide. To do this, a combination of different decision-making methodologies will be carried out. These methodologies enable to not only extract the knowledge by experts but also to know the causes and effects that help to make the best decision. In order to do so, techniques to seek information (Delphi and Checklist as well as diagram techniques such as cause and effect diagrams or Strengths Weaknesses Opportunities and Threats (SWOT are applied. The categorization and prioritization of risks will be carried out through the Analytic Hierarchy Process (AHP. Finally, a sensitivity analysis will allow for providing consistency to the obtained results. A real case in the Dominican Republic will also be presented as case study.

Tailings management best practice: a case study of the McClean Lake JEB Tailings Management Facility

International Nuclear Information System (INIS)

Tremblay, M.A.J.; Rowson, J.

2005-01-01

COGEMA Resources Inc. (which is part of the Areva Group) is a Canadian company with its head office in Saskatoon, Saskatchewan. It owns and operates mining and milling facilities in Northern Saskatchewan, which produce uranium concentrate. McClean Lake Operation commenced production in 1999 and its tailings management facility represents the state of the art for tailings management in the uranium industry in Canada. Tailings disposal has the potential to cause effects in the surrounding receiving environment primarily through migration of soluble constituents from the facility to surface water receptors. In-pit disposal or mill tailings has become the standard in the uranium mining industry in Northern Saskatchewan. This method or tailings management demonstrates advances in terms of worker radiation protection and containment of soluble constituents both during operations and into the long term. Sub-aqueous deposition of tailings protects personnel from exposure to radiation and airborne emissions and prevents freezing of tailings, which can hinder consolidation. The continuous inflow of groundwater to the facility is achieved during operations, through control of water levels within the facility. This ensures hydrodynamic containment, which prevents migration of soluble radionuclides and heavy metals into the surrounding aquifer during operations. The environmental performance of the decommissioned facility depends upon the rate of release of contaminants to the receiving environment. The rate of constituent loading to the receiving environment will ultimately be governed by the concentrations of soluble constituents within the tailings mass, the mechanisms for release from the tailings to the surrounding groundwater system, and transport of constituents within the groundwater pathway to the receiving environment. The tailings preparation process was designed to convert arsenic into a stable form to reduce soluble concentrations within the tailings mass. The

Case studies in organic contaminant hydrogeology

International Nuclear Information System (INIS)

Baker, J.A.

1989-01-01

The effective management of domestic solid waste and hazardous, toxic, and radioactive waste is a major problem in the area of environmental geology and water sciences throughout the world. A series of case studies is presented of organic contaminants from both solid and hazardous waste disposal facilities to provide examples of these problems. The facilities were investigated to determine risks and liabilities before acquisition, to determine the site hydrogeologic conditions for design of appropriate groundwater monitoring plans, and/or to determine the potential for groundwater contamination. The case studies are of disposal facilities located in glacial tills, carbonaceous weathered clay soils, weathered shale, limestone bedrock, dolomite bedrock, and alluvial and sedimentary deposits. The results of these studies and investigations show certain relationships in the distribution of organic pollutants to the different geologic and hydrogeologic characteristics of each facility. In each of the four case studies, all 129 priority pollutants were analyzed in private wells and/or monitoring wells. The 31 volatile organic compounds (VOCs) of the priority pollutant list were the majority of organic compounds detected. When VOCs are found in groundwater impacted by disposal facilities, they are present in groups and tend to be distributed in patterns based on their relative concentrations. It is rare to find only one or two VOCs from facilities where leakage has been detected. The ethylenes and ethanes appear to be more prevalent and mobile than aromatic VOCs. The aromatics are restricted primarily to leachates and wastes and in monitoring wells located adjacent to facilities. 2 refs., 15 figs

The effect of location and facility demand on the marginal cost of delivered wood chips from energy crops: A case study of the state of Tennessee

International Nuclear Information System (INIS)

Graham, R.L.; Liu, W.; Downing, M.; Noon, C.; Daly, M.; Moore, A.

1995-01-01

Cost-supply curves for delivered wood chips from short rotation woody crops were calculated for 21 regularly-spaced locations spanning the state of Tennessee. These curves were used to systematically evaluate the combined effects of location and facility demand on wood chip feedstock costs in Tennessee. The cost-supply curves were developed using BRAVO, a GIS-based decision support system which calculates marginal cost of delivering wood chips to a specific location given road network maps and maps of farmgate prices and supplies of woody chips from short rotation energy crops. Marginal costs of delivered chips varied by both facility location in the state and facility demand. Marginal costs were lowest in central Tennessee unless the facility demand was greater than 2.7 million dry Mg per year (3 million dry tons per year) in which case west Tennessee was the lowest cost region. Marginal costs rose rapidly with increasing facility demand in the mountainous eastern portion of the state. Transportation costs accounted for 18 to 29% of the delivered cost and ranged between $8 and $18/dry Mg ($7 and $16/dry ton). Reducing the expected farmer participation rate from 100% to 50% or 25% dramatically raised the marginal costs of feedstock supply in the east and central regions of the state. The analysis demonstrates the need to use geographically-specific information when projecting the potential costs and supplies of biomass feedstock

Procedures for conducting probabilistic safety assessment for non-reactor nuclear facilities

International Nuclear Information System (INIS)

2002-01-01

A well performed and adequately documented safety assessment of a nuclear facility will serve as a basis to determine whether the facility complies with the safety objectives, principles and criteria as stipulated by the national regulatory body of the country where the facility is in operation. International experience shows that the practices and methodologies used to perform safety assessments and periodic safety re-assessment for non-reactor nuclear facilities differ significantly from county to country. Most developing countries do not have methods and guidance for safety assessment that are prescribed by the regulatory body. Typically the safety evaluation for the facility is based on a case by case assessment. Whilst conservative deterministic analyses are predominantly used as a licensing basis in many countries, recently probabilistic safety assessment (PSA) techniques have been applied as a useful complementary tool to support safety decision making. The main benefit of PSA is to provide insights into the safety aspects of facility design and operation. PSA points up the potential environmental impacts of postulated accidents, including the dominant risk contributors, and enables safety analysts to compare options for reducing risk. In order to advise on how to apply PSA methodology for the safety assessment of non-reactor nuclear facilities, the IAEA organized several consultants meetings, which led to the preparation of this TECDOC. This document is intended as guidance for the conduct of PSA in non-nuclear facilities. The main emphasis here is on the general procedural steps of a PSA that is specific for a non-reactor nuclear facility, rather than the details of the specific methods. The report is directed at technical staff managing or performing such probabilistic assessments and to promote a standardized framework, terminology and form of documentation for these PSAs. It is understood that the level of detail implied in the tasks presented in this

Innovative Procurement and Partnerships in Facilities Management

DEFF Research Database (Denmark)

Jensen, Per Anker

2010-01-01

strong requirements on the management style and company culture. Limitations of the research: The research is only based on two case studies, which obviously limits the possibility to generalize the results. Practical applications: The research presents two specific examples of innovative procurement......Aim: The aim of the paper is to present, analyse and identify learning from two case studies of innovative procurement in Facilities Management (FM) concerning the establishments of partnerships between clients and providers. Approach and methodology: A major study of FM best practice covering 36...

Management of Decommissioning on a Multi-Facility Site

International Nuclear Information System (INIS)

Laraia, Michele; McIntyre, Peter; Visagie, Abrie

2008-01-01

The management of the decommissioning of multi-facility sites may be inadequate or inappropriate if based on approaches and strategies developed for sites consisting of only a single facility. The varied nature of activities undertaken, their interfaces and their interdependencies are likely to complicate the management of decommissioning. These issues can be exacerbated where some facilities are entering the decommissioning phase while others are still operational or even new facilities are being built. Multi-facility sites are not uncommon worldwide but perhaps insufficient attention has been paid to optimizing the overall site decommissioning in the context of the entire life cycle of facilities. Decommissioning management arrangements need to be established taking a view across the whole site. A site-wide decommissioning management system is required. This should include a project evaluation and approval process and specific arrangements to manage identified interfaces and interdependencies. A group should be created to manage decommissioning across the site, ensuring adequate and consistent practices in accordance with the management system. Decommissioning management should be aimed at the entire life cycle of facilities. In the case of multi facility sites, the process becomes more complex and decommissioning management arrangements need to be established with a view to the whole site. A site decommissioning management system, a group that is responsible for decommissioning on site, a site project evaluation and approval process and specific arrangements to manage the identified interfaces are key areas of a site decommissioning management structure that need to be addressed to ensure adequate and consistent decommissioning practices. A decommissioning strategy based on single facilities in a sequential manner is deemed inadequate

Waste management facility acceptance - some findings

International Nuclear Information System (INIS)

Sigmon, B.

1987-01-01

Acceptance of waste management facilities remains a significant problem, despite years of efforts to reassure potential host communities. The tangible economic benefits from jobs, taxes, and expenditures are generally small, while the intangible risks of environmental or other impacts are difficult to evaluate and understand. No magic formula for winning local acceptance has yet been found. Limited case study and survey work does suggest some pitfalls to be avoided and some directions to be pursued. Among the most significant is the importance that communities place on controlling their own destiny. Finding a meaningful role for communities in the planning and operation of waste management facilities is a challenge that would-be developers should approach with the same creativity that characterizes their technical efforts

Sustainable Public Procurement of Medical Technology and Green Logistics

DEFF Research Database (Denmark)

Vettorato, Giovanna; Hsuan, Juliana

This paper investigates design for remanufacture in terms of both detailed new product design and the environmental performance in which modularization and reversed production may operate. We examine the medical equipment industry and their potential contributions to the implementation of green...... supply chain in the healthcare sector. An exploratory case study of medical equipment supply chain is presented when considering the life cycle of the product can be managed through the modularization strategies. Preliminary findings indicate that design-for-disassembly of modules make equipment easier...

Electrical energy and cost for the Mirror Fusion Test Facility

International Nuclear Information System (INIS)

Pence, G.A.

1983-02-01

An operational scenario for the Mirror Fusion Test Facility has been developed based on System Requirements, experience with existing systems, and discussions with project engineers and designers who are responsible for the systems. This scenario was used to project the electrical energy required for the facility. Each system is listed showing the equipment that has been considered, the amount of power requested, and in most cases, the power that it is now connected

A Study on the Allowable Safety Factor of Cut-Slopes for Nuclear Facilities

Energy Technology Data Exchange (ETDEWEB)

Kim, Myung Soo; Yee, Eric [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

2015-10-15

In this study, the issues of allowable safety factor design criteria for cut-slopes in nuclear facilities is derived through case analysis, a proposed construction work slope design criteria that provides relatively detailed conditions can be applied in case of the dry season and some unclear parts of slope design criteria be modified in case of the rainy season. This safety factor can be further subdivided into two; normal and earthquake factors, a factor of 1.5 is applied for normal conditions and a factor of 1.2 is applied for seismic conditions. This safety factor takes into consideration the effect of ground water and rainfall conditions. However, no criteria for the case of cut-slope in nuclear facilities and its response to seismic conditions is clearly defined, this can cause uncertainty in design. Therefore, this paper investigates the allowable safety factor for cut-slopes in nuclear facilities, reviews conditions of both local and international cut-slope models and finally suggests an alternative method of analysis. It is expected that the new design criteria adequately ensures the stability of the cut-slope to reflect clear conditions for both the supervising and design engineers.

An improved Lagrangian relaxation and dual ascent approach to facility location problems

DEFF Research Database (Denmark)

Jörnsten, Kurt; Klose, Andreas

2016-01-01

not be reduced to the same extent as in the case of ordinary semi-Lagrangian relaxation. Hence, an effective method for optimizing the Lagrangian dual function is of utmost importance for obtaining a computational advantage from the simplified Lagrangian dual function. In this paper, we suggest a new dual ascent...... method for optimizing both the semi-Lagrangian dual function as well as its simplified form for the case of a generic discrete facility location problem and apply the method to the uncapacitated facility location problem. Our computational results show that the method generally only requires a very few...

Opportunities for Automated Demand Response in Wastewater Treatment Facilities in California - Southeast Water Pollution Control Plant Case Study

Energy Technology Data Exchange (ETDEWEB)

Olsen, Daniel [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Goli, Sasank [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Faulkner, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McKane, Aimee [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2012-12-20

This report details a study into the demand response potential of a large wastewater treatment facility in San Francisco. Previous research had identified wastewater treatment facilities as good candidates for demand response and automated demand response, and this study was conducted to investigate facility attributes that are conducive to demand response or which hinder its implementation. One years' worth of operational data were collected from the facility's control system, submetered process equipment, utility electricity demand records, and governmental weather stations. These data were analyzed to determine factors which affected facility power demand and demand response capabilities The average baseline demand at the Southeast facility was approximately 4 MW. During the rainy season (October-March) the facility treated 40% more wastewater than the dry season, but demand only increased by 4%. Submetering of the facility's lift pumps and centrifuges predicted load shifts capabilities of 154 kW and 86 kW, respectively, with large lift pump shifts in the rainy season. Analysis of demand data during maintenance events confirmed the magnitude of these possible load shifts, and indicated other areas of the facility with demand response potential. Load sheds were seen to be possible by shutting down a portion of the facility's aeration trains (average shed of 132 kW). Load shifts were seen to be possible by shifting operation of centrifuges, the gravity belt thickener, lift pumps, and external pump stations These load shifts were made possible by the storage capabilities of the facility and of the city's sewer system. Large load reductions (an average of 2,065 kW) were seen from operating the cogeneration unit, but normal practice is continuous operation, precluding its use for demand response. The study also identified potential demand response opportunities that warrant further study: modulating variable-demand aeration loads, shifting

Dance Facilities.

Science.gov (United States)

Ashton, Dudley, Ed.; Irey, Charlotte, Ed.

This booklet represents an effort to assist teachers and administrators in the professional planning of dance facilities and equipment. Three chapters present the history of dance facilities, provide recommended dance facilities and equipment, and offer some adaptations of dance facilities and equipment, for elementary, secondary and college level…

Differential infrared thermography applied to power generation facilities -- A case history

International Nuclear Information System (INIS)

Kaplan, H.; Zayicek, P.

1995-01-01

The controlled and systematic application of differential thermal imaging (DIT) can be a highly promising tool for condition monitoring and predictive maintenance of electronic, electrical and mechanical elements and can dramatically improve the reliability, maintainability and operational life of certain types of elements in the power generation and distribution community. The expanded applicability of this technique has been brought about by improvements in commercial IR thermal imaging equipment and advances in the related data and image processing capacities. This paper summarizes the advantages and limitations of DIT and describes several variations of the technique. It goes on to provide an update of progress on a program initiated by the Electric Power Research Institute (EPRI) Nondestructive Evaluation (NDE) Center to apply DIT to operating elements within a power generating station environment (Wolf Creek Nuclear Facility). It traces the selection of candidate elements at some of EPRI's member facilities, the implementation of exploratory measurements on selected candidates using available on-site infrared imaging equipment and the analysis of significant findings on one specific critical element. Finally, a projection for the potential future applicability of the DIT technique is provided

Developing of the protocol for electron beam food irradiation facility

International Nuclear Information System (INIS)

Petreska, Svetlana

2012-01-01

By establishing the needs for institution of new technologies in the process of food processing, in this case a randomized choice of electron beam accelerator facility, arises the need for designing a protocol for safe and secure performance of the facility. The protocol encompasses safety and security measures for protection from ionizing radiation of the individuals who work at the facility, as well as, the population and the environment in the immediate neighborhood of the facility. Thus, the adopted approach is the establishment of appropriate systems responding to the protocol. Dosimetry system, which includes appropriate procedures for accurate measure and recording of the absorbed dose values, according to the provisions for protection from ionizing radiation. Ionizing radiation protection system and providing the safety and security of the facility for food processing by means of ionizing radiation. System for providing quality and safety control of the facility for food processing by means of ionizing radiation. Pursuant to the designed a protocol for safe and secure performance of the facility for electron beam food processing, contributes to protection against ionizing radiation as occupationally exposed persons as well the population. (Author)

Facilities inventory protection for nuclear facilities

International Nuclear Information System (INIS)

Schmitt, F.J.

1989-01-01

The fact that shut-down applications have been filed for nuclear power plants, suggests to have a scrutinizing look at the scopes of assessment and decision available to administrations and courts for the protection of facilities inventories relative to legal and constitutional requirements. The paper outlines the legal bases which need to be observed if purposeful calculation is to be ensured. Based on the different actual conditions and legal consequences, the author distinguishes between 1) the legal situation of facilities licenced already and 2) the legal situation of facilities under planning during the licencing stage. As indicated by the contents and restrictions of the pertinent provisions of the Atomic Energy Act and by the corresponding compensatory regulation, the object of the protection of facilities inventor in the legal position of the facility owner within the purview of the Atomic Energy Act, and the licensing proper. Art. 17 of the Atomic Energy Act indicates the legislators intent that, once issued, the licence will be the pivotal point for regulations aiming at protection and intervention. (orig./HSCH) [de

Los Alamos Critical Experiments Facility

International Nuclear Information System (INIS)

Malenfant, R.E.

1991-01-01

The Critical Experiments Facility of the Los Alamos National Laboratory has been in existence for 45 years. In that period of time, thousands of measurements have been made on assemblies containing every fissionable material in various configurations that included bare metal and compounds of the nitrate, sulfate, fluoride, carbide, and oxide. Techniques developed or applied include Rossi-α, source-jerk, rod oscillator, and replacement measurements. Many of the original measurements of delay neutrons were performed at the site, and a replica of the Hiroshima weapon was operated at steady state to assist in evaluating the relative biological effectiveness (RBE) of neutrons. Solid, liquid, and gas fissioning systems were run at critical. Operation of this original critical facility has demonstrated the margin of safety that can be obtained through remote operation. Eight accidental excursions have occurred on the site, ranging from 1.5 x 10 16 to 1.2 x 10 17 fissions, with no significant exposure to personnel or damage to the facility beyond the machines themselves -- and in only one case was the machine damaged beyond further use. The present status of the facility, operating procedures, and complement of machines will be described in the context of programmatic activity. New programs will focus on training, validation of criticality alarm systems, experimental safety assessment of process applications, and dosimetry. Special emphasis will be placed on the incorporation of experience from 45 years of operation into present procedures and programs. 3 refs

[Organization of workplace first aid in health care facilities].

Science.gov (United States)

Ciavarella, M; Sacco, A; Bosco, Maria Giuseppina; Chinni, V; De Santis, A; Pagnanelli, A

2007-01-01

Laws D.Lgs. 626/94 and D.I. 388/03 attach particular importance to the organization of first aid in the workplace. Like every other enterprise, also hospitals and health care facilities have the obligation, as foreseen by the relevant legislation, to organize and manage first aid in the workplace. To discuss the topic in the light of the guidelines contained in the literature. We used the references contained in the relevant literature and in the regulations concerning organization of first aid in health care facilities. The regulations require the general manager of health care facilities to organize the primary intervention in case of emergencies in all health care facilities (health care or administrative, territorial and hospitals). In health care facilities the particular occupational risks, the general access of the public and the presence of patients who are already assumed to have altered states of health, should be the reason for particular care in guaranteeing the best possible management of a health emergency in the shortest time possible.

Regulations for radiochemical facilities in the United States

International Nuclear Information System (INIS)

Emeigh, Ch; Smith, B.; Williams, T

1999-01-01

Material control and accounting is implemented to provide assurance that physical protection measures have been effective, and in case they fail, to provide delayed detection of the loss. Regulations in the United States have been developed that include both performance and compliance requirements to provide a defence in depth approach addressing the unique characteristics of each facility. Regulations address administrative controls, material control and material accounting. Nuclear materials control and accounting plans are negotiated between regulatory agencies and facilities to develop a site-specific approach. An overview of the regulations and their implementation in the United State is provided [ru

Case-Mix Adjustment of the Bereaved Family Survey.

Science.gov (United States)

Kutney-Lee, Ann; Carpenter, Joan; Smith, Dawn; Thorpe, Joshua; Tudose, Alina; Ersek, Mary

2018-01-01

Surveys of bereaved family members are increasingly being used to evaluate end-of-life (EOL) care and to measure organizational performance in EOL care quality. The Bereaved Family Survey (BFS) is used to monitor EOL care quality and benchmark performance in the Veterans Affairs (VA) health-care system. The objective of this study was to develop a case-mix adjustment model for the BFS and to examine changes in facility-level scores following adjustment, in order to provide fair comparisons across facilities. We conducted a cross-sectional secondary analysis of medical record and survey data from veterans and their family members across 146 VA medical centers. Following adjustment using model-based propensity weighting, the mean change in the BFS-Performance Measure score across facilities was -0.6 with a range of -2.6 to 0.6. Fifty-five (38%) facilities changed within ±0.5 percentage points of their unadjusted score. On average, facilities that benefited most from adjustment cared for patients with greater comorbidity burden and were located in urban areas in the Northwest and Midwestern regions of the country. Case-mix adjustment results in minor changes to facility-level BFS scores but allows for fairer comparisons of EOL care quality. Case-mix adjustment of the BFS positions this National Quality Forum-endorsed measure for use in public reporting and internal quality dashboards for VA leadership and may inform the development and refinement of case-mix adjustment models for other surveys of bereaved family members.

Development techniques of computerized maintenance management system for nuclear fuel cycle examination facilities

International Nuclear Information System (INIS)

Oh, Yon Woo; Kim, S. D.; Soong, W. S.; Kim, G. H.; Oh, W. H.; Kim, Y. G.

2000-12-01

Normal operation of the facility is one of the key factors in the accomplishments of research goals. As confirmed by a case study of the influence of the facility operation condition on the research results, emphasis should be put on the facility preserve management. Facilities should be maintained in solid operational condition and their malfunctions should be repaired as soon as possible. The purpose of this project is to make propositions on the development of the facility Preserve management system which is to maximize the efficiency of the budget execution, manpower organization and maintenance planning, and is to minimize the duration of the operational pause due to malfunctions with the least disbursement

Development techniques of computerized maintenance management system for nuclear fuel cycle examination facilities

Energy Technology Data Exchange (ETDEWEB)

Oh, Yon Woo; Kim, S D; Soong, W S; Kim, G H; Oh, W H; Kim, Y G

2000-12-01

Normal operation of the facility is one of the key factors in the accomplishments of research goals. As confirmed by a case study of the influence of the facility operation condition on the research results, emphasis should be put on the facility preserve management. Facilities should be maintained in solid operational condition and their malfunctions should be repaired as soon as possible. The purpose of this project is to make propositions on the development of the facility Preserve management system which is to maximize the efficiency of the budget execution, manpower organization and maintenance planning, and is to minimize the duration of the operational pause due to malfunctions with the least disbursement.

A model for evaluating the environmental benefits of elementary school facilities.

Science.gov (United States)

Ji, Changyoon; Hong, Taehoon; Jeong, Kwangbok; Leigh, Seung-Bok

2014-01-01

In this study, a model that is capable of evaluating the environmental benefits of a new elementary school facility was developed. The model is composed of three steps: (i) retrieval of elementary school facilities having similar characteristics as the new elementary school facility using case-based reasoning; (ii) creation of energy consumption and material data for the benchmark elementary school facility using the retrieved similar elementary school facilities; and (iii) evaluation of the environmental benefits of the new elementary school facility by assessing and comparing the environmental impact of the new and created benchmark elementary school facility using life cycle assessment. The developed model can present the environmental benefits of a new elementary school facility in terms of monetary values using Environmental Priority Strategy 2000, a damage-oriented life cycle impact assessment method. The developed model can be used for the following: (i) as criteria for a green-building rating system; (ii) as criteria for setting the support plan and size, such as the government's incentives for promoting green-building projects; and (iii) as criteria for determining the feasibility of green building projects in key business sectors. Copyright © 2013 Elsevier Ltd. All rights reserved.

Reducing environmental burdens of solid-state lighting through end-of-life design

International Nuclear Information System (INIS)

Hendrickson, C T; Matthews, D H; Ashe, M; Jaramillo, P; McMichael, F C

2010-01-01

With 20% of US electricity used for lighting, energy efficient solid-state lighting technology could have significant benefits. While energy efficiency in use is important, the life cycle cost, energy and environmental impacts of light-emitting diode (LED) solid-state lighting could be reduced by reusing, remanufacturing or recycling components of the end products. Design decisions at this time for the nascent technology can reduce material and manufacturing burdens by considering the ease of disassembly, potential for remanufacturing, and recovery of parts and materials for reuse and recycling. We use teardowns of three commercial solid-state lighting products designed to fit in conventional Edison light bulb sockets to analyze potential end-of-life reuse strategies for solid-state lighting and recommend strategies for the industry. Current lamp designs would benefit from standardization of part connections to facilitate disassembly and remanufacturing of components, and fewer material types in structural pieces to maximize homogeneous materials recovery. The lighting industry should also start now to develop an effective product take-back system for collecting future end-of-life products.

Reducing environmental burdens of solid-state lighting through end-of-life design

Energy Technology Data Exchange (ETDEWEB)

Hendrickson, C T; Matthews, D H; Ashe, M; Jaramillo, P; McMichael, F C, E-mail: cth@cmu.ed [Green Design Institute, Carnegie Mellon University (United States)

2010-01-15

With 20% of US electricity used for lighting, energy efficient solid-state lighting technology could have significant benefits. While energy efficiency in use is important, the life cycle cost, energy and environmental impacts of light-emitting diode (LED) solid-state lighting could be reduced by reusing, remanufacturing or recycling components of the end products. Design decisions at this time for the nascent technology can reduce material and manufacturing burdens by considering the ease of disassembly, potential for remanufacturing, and recovery of parts and materials for reuse and recycling. We use teardowns of three commercial solid-state lighting products designed to fit in conventional Edison light bulb sockets to analyze potential end-of-life reuse strategies for solid-state lighting and recommend strategies for the industry. Current lamp designs would benefit from standardization of part connections to facilitate disassembly and remanufacturing of components, and fewer material types in structural pieces to maximize homogeneous materials recovery. The lighting industry should also start now to develop an effective product take-back system for collecting future end-of-life products.

Managing a closed-loop supply chain inventory system with learning effects

Science.gov (United States)

Jauhari, Wakhid Ahmad; Dwicahyani, Anindya Rachma; Hendaryani, Oktiviandri; Kurdhi, Nughthoh Arfawi

2018-02-01

In this paper, we propose a closed-loop supply chain model consisting of a retailer and a manufacturer. We intend to investigate the impact of learning in regular production, remanufacturing and reworking. The customer demand is assumed deterministic and will be satisfied from both regular production and remanufacturing process. The return rate of used items depends on quality. We propose a mathematical model with the objective is to maximize the joint total profit by simultaneously determining the length of ordering cycle for the retailer and the number of regular production and remanufacturing cycle. The algorithm is suggested for finding the optimal solution. A numerical example is presented to illustrate the application of using a proposed model. The results show that the integrated model performs better in reducing total cost compared to the independent model. The total cost is most affected by the changes in the values of unit production cost and acceptable quality level. In addition, the changes in the defective items proportion and the fraction of holding costs significantly influence the retailer's ordering period.

Effect of Inspection Policies and Residual Value of Collected Used Products: A Mathematical Model and Genetic Algorithm for a Closed-Loop Green Manufacturing System

Directory of Open Access Journals (Sweden)

Byung Duk Song

2017-09-01

Full Text Available In the green manufacturing system that pursues the reuse of used products, the residual value of collected used products (CUP hugely affects a variety of managerial decisions to construct profitable and environmental remanufacturing plans. This paper deals with a closed-loop green manufacturing system for companies which perform both manufacturing with raw materials and remanufacturing with collected used products (CUP. The amount of CUP is assumed as a function of buy-back cost while the quality level of CUP, which means the residual value, follows a known distribution. In addition, the remanufacturing cost can differ according to the quality of the CUP. Moreover, nowadays companies are subject to existing environment-related laws such as Extended Producer Responsibility (EPR. Therefore, a company should collect more used products than its obligatory take-back quota or face fines from the government for not meeting its quota. Through the development of mathematical models, two kinds of inspection policies are examined to validate the efficiency of two different operation processes. To find a managerial solution, a genetic algorithm is proposed and tested with numerical examples.

Facility effluent monitoring plan determinations for the 200 Area facilities

International Nuclear Information System (INIS)

Nickels, J.M.

1991-11-01

The following facility effluent monitoring plan determinations document the evaluations conducted for the Westinghouse Hanford Company 200 Area facilities (chemical processing, waste management, 222-S Laboratory, and laundry) on the Hanford Site in south central Washington State. These evaluations determined the need for facility effluent monitoring plans for the 200 Area facilities. The facility effluent monitoring plan determinations have been prepared in accordance with A Guide for Preparing Hanford Site Facility Effluent Monitoring Plans, WHC-EP-0438 (WHC 1991). The Plutonium/Uranium Extraction Plant and UO 3 facility effluent monitoring plan determinations were prepared by Los Alamos Technical Associates, Richland, Washington. The Plutonium Finishing Plant, Transuranic Waste Storage and Assay Facility, T Plant, Tank Farms, Low Level Burial Grounds, and 222-S Laboratory determinations were prepared by Science Applications International Corporation of Richland, Washington. The B Plant Facility Effluent Monitoring Plan Determination was prepared by ERCE Environmental Services of Richland, Washington

High intensity neutrino oscillation facilities in Europe

Directory of Open Access Journals (Sweden)

T. R. Edgecock

2013-02-01

Full Text Available The EUROnu project has studied three possible options for future, high intensity neutrino oscillation facilities in Europe. The first is a Super Beam, in which the neutrinos come from the decay of pions created by bombarding targets with a 4 MW proton beam from the CERN High Power Superconducting Proton Linac. The far detector for this facility is the 500 kt MEMPHYS water Cherenkov, located in the Fréjus tunnel. The second facility is the Neutrino Factory, in which the neutrinos come from the decay of μ^{+} and μ^{-} beams in a storage ring. The far detector in this case is a 100 kt magnetized iron neutrino detector at a baseline of 2000 km. The third option is a Beta Beam, in which the neutrinos come from the decay of beta emitting isotopes, in particular ^{6}He and ^{18}Ne, also stored in a ring. The far detector is also the MEMPHYS detector in the Fréjus tunnel. EUROnu has undertaken conceptual designs of these facilities and studied the performance of the detectors. Based on this, it has determined the physics reach of each facility, in particular for the measurement of CP violation in the lepton sector, and estimated the cost of construction. These have demonstrated that the best facility to build is the Neutrino Factory. However, if a powerful proton driver is constructed for another purpose or if the MEMPHYS detector is built for astroparticle physics, the Super Beam also becomes very attractive.

A simulation-based robust biofuel facility location model for an integrated bio-energy logistics network

Directory of Open Access Journals (Sweden)

Jae-Dong Hong

2014-10-01

Full Text Available Purpose: The purpose of this paper is to propose a simulation-based robust biofuel facility location model for solving an integrated bio-energy logistics network (IBLN problem, where biomass yield is often uncertain or difficult to determine.Design/methodology/approach: The IBLN considered in this paper consists of four different facilities: farm or harvest site (HS, collection facility (CF, biorefinery (BR, and blending station (BS. Authors propose a mixed integer quadratic modeling approach to simultaneously determine the optimal CF and BR locations and corresponding biomass and bio-energy transportation plans. The authors randomly generate biomass yield of each HS and find the optimal locations of CFs and BRs for each generated biomass yield, and select the robust locations of CFs and BRs to show the effects of biomass yield uncertainty on the optimality of CF and BR locations. Case studies using data from the State of South Carolina in the United State are conducted to demonstrate the developed model’s capability to better handle the impact of uncertainty of biomass yield.Findings: The results illustrate that the robust location model for BRs and CFs works very well in terms of the total logistics costs. The proposed model would help decision-makers find the most robust locations for biorefineries and collection facilities, which usually require huge investments, and would assist potential investors in identifying the least cost or important facilities to invest in the biomass and bio-energy industry.Originality/value: An optimal biofuel facility location model is formulated for the case of deterministic biomass yield. To improve the robustness of the model for cases with probabilistic biomass yield, the model is evaluated by a simulation approach using case studies. The proposed model and robustness concept would be a very useful tool that helps potential biofuel investors minimize their investment risk.

Facilities & Leadership

Data.gov (United States)

Department of Veterans Affairs — The facilities web service provides VA facility information. The VA facilities locator is a feature that is available across the enterprise, on any webpage, for the...

Assessment of Recreational Facilities in Federal Capital City, Abuja, Nigeria

Directory of Open Access Journals (Sweden)

Cyril Kanayo Ezeamaka

2016-06-01

Full Text Available Abuja Master Plan provided development of adequate Green Areas and other Recreational Facilities within the Federal Capital City (FCC, as part of its sustainability principles and provided for these recreational facilities within each neighborhood (FCDA, 1979. However, there have been several recent foul cries about the negative development of recreational facilities and the abuse of the Master Plan in the FCC.  The motivation for carrying out this study arose from the observation that recreational facilities in Phase 1 of the Federal Capital City Abuja are not clearly developed as intended by the policy makers and thus, the need to identify the recreational facilities in the Phase 1 of FCC and observe their level of development as well as usage. The field survey revealed that the Central Business District and Gazupe have higher numbers of recreational facilities with 45 and 56. While Wuse II (A08 and Wuse II (A07 Districts have lesser recreational facilities with 10 and 17. The field survey further revealed that all the districts in Phase 1 have over 35% cases of land use changes from recreational facilities to other use. The survey shows that over 65% of these recreational facilities are fully developed. The study also shows that just about 11% of the recreational sporting facilities were developed in line with the Abuja Master Plan in Phase 1. The study revealed that recreational facilities in Phase 1 of the FCC, Abuja has not being developed in compliance with the Abuja Master Plan.

Facility model for the Los Alamos Plutonium Facility

International Nuclear Information System (INIS)

Coulter, C.A.; Thomas, K.E.; Sohn, C.L.; Yarbro, T.F.; Hench, K.W.

1986-01-01

The Los Alamos Plutonium Facility contains more than sixty unit processes and handles a large variety of nuclear materials, including many forms of plutonium-bearing scrap. The management of the Plutonium Facility is supporting the development of a computer model of the facility as a means of effectively integrating the large amount of information required for material control, process planning, and facility development. The model is designed to provide a flexible, easily maintainable facility description that allows the faciltiy to be represented at any desired level of detail within a single modeling framework, and to do this using a model program and data files that can be read and understood by a technically qualified person without modeling experience. These characteristics were achieved by structuring the model so that all facility data is contained in data files, formulating the model in a simulation language that provides a flexible set of data structures and permits a near-English-language syntax, and using a description for unit processes that can represent either a true unit process or a major subsection of the facility. Use of the model is illustrated by applying it to two configurations of a fictitious nuclear material processing line

A Mixed Integer Linear Programming Model for the Design of Remanufacturing Closed–loop Supply Chain Network

Directory of Open Access Journals (Sweden)

Mbarek Elbounjimi

2015-11-01

Full Text Available Closed-loop supply chain network design is a critical issue due to its impact on both economic and environmental performances of the supply chain. In this paper, we address the problem of designing a multi-echelon, multi-product and capacitated closed-loop supply chain network. First, a mixed-integer linear programming formulation is developed to maximize the total profit. The main contribution of the proposed model is addressing two economic viability issues of closed-loop supply chain. The first issue is the collection of sufficient quantity of end-of-life products are assured by retailers against an acquisition price. The second issue is exploiting the benefits of colocation of forward facilities and reverse facilities. The presented model is solved by LINGO for some test problems. Computational results and sensitivity analysis are conducted to show the performance of the proposed model.

Computer-Assisted School Facility Planning with ONPASS.

Science.gov (United States)

Urban Decision Systems, Inc., Los Angeles, CA.

The analytical capabilities of ONPASS, an on-line computer-aided school facility planning system, are described by its developers. This report describes how, using the Canoga Park-Winnetka-Woodland Hills Planning Area as a test case, the Department of City Planning of the city of Los Angeles employed ONPASS to demonstrate how an on-line system can…

Methodology for analyzing risk at nuclear facilities

International Nuclear Information System (INIS)

Yoo, Hosik; Lee, Nayoung; Ham, Taekyu; Seo, Janghoon

2015-01-01

Highlights: • A new methodology for evaluating the risk at nuclear facilities was developed. • Five measures reflecting all factors that should be concerned to assess risk were developed. • The attributes on NMAC and nuclear security culture are included as attributes for analyzing. • The newly developed methodology can be used to evaluate risk of both existing facility and future nuclear system. - Abstract: A methodology for evaluating risks at nuclear facilities is developed in this work. A series of measures is drawn from the analysis of factors that determine risks. Five measures are created to evaluate risks at nuclear facilities. These include the legal and institutional framework, material control, physical protection system effectiveness, human resources, and consequences. Evaluation attributes are developed for each measure and specific values are given in order to calculate the risk value quantitatively. Questionnaires are drawn up on whether or not a state has properly established a legal and regulatory framework (based on international standards). These questionnaires can be a useful measure for comparing the status of the physical protection regime between two countries. Analyzing an insider threat is not an easy task and no methodology has been developed for this purpose. In this study, attributes that could quantitatively evaluate an insider threat, in the case of an unauthorized removal of nuclear materials, are developed by adopting the Nuclear Material Accounting & Control (NMAC) system. The effectiveness of a physical protection system, P(E), could be analyzed by calculating the probability of interruption, P(I), and the probability of neutralization, P(N). In this study, the Tool for Evaluating Security System (TESS) code developed by KINAC is used to calculate P(I) and P(N). Consequence is an important measure used to analyze risks at nuclear facilities. This measure comprises radiological, economic, and social damage. Social and

Association Between Treatment at High-Volume Facilities and Improved Overall Survival in Soft Tissue Sarcomas.

Science.gov (United States)

Venigalla, Sriram; Nead, Kevin T; Sebro, Ronnie; Guttmann, David M; Sharma, Sonam; Simone, Charles B; Levin, William P; Wilson, Robert J; Weber, Kristy L; Shabason, Jacob E

2018-03-15

Soft tissue sarcomas (STS) are rare malignancies that require complex multidisciplinary management. Therefore, facilities with high sarcoma case volume may demonstrate superior outcomes. We hypothesized that STS treatment at high-volume (HV) facilities would be associated with improved overall survival (OS). Patients aged ≥18 years with nonmetastatic STS treated with surgery and radiation therapy at a single facility from 2004 through 2013 were identified from the National Cancer Database. Facilities were dichotomized into HV and low-volume (LV) cohorts based on total case volume over the study period. OS was assessed using multivariable Cox regression with propensity score-matching. Patterns of care were assessed using multivariable logistic regression analysis. Of 9025 total patients, 1578 (17%) and 7447 (83%) were treated at HV and LV facilities, respectively. On multivariable analysis, high educational attainment, larger tumor size, higher grade, and negative surgical margins were statistically significantly associated with treatment at HV facilities; conversely, black race and non-metropolitan residence were negative predictors of treatment at HV facilities. On propensity score-matched multivariable analysis, treatment at HV facilities versus LV facilities was associated with improved OS (hazard ratio, 0.87, 95% confidence interval, 0.80-0.95; P = .001). Older age, lack of insurance, greater comorbidity, larger tumor size, higher tumor grade, and positive surgical margins were associated with statistically significantly worse OS. In this observational cohort study using the National Cancer Database, receipt of surgery and radiation therapy at HV facilities was associated with improved OS in patients with STS. Potential sociodemographic disparities limit access to care at HV facilities for certain populations. Our findings highlight the importance of receipt of care at HV facilities for patients with STS and warrant further study into improving access to

Urbanonymic Design: On the Naming of City Facilities

Directory of Open Access Journals (Sweden)

Marina V. Golomidova

2015-06-01

Full Text Available The paper focuses on the problems of naming and renaming of municipal facilities: streets, squares, parks, public gardens, etc. The author’s reflections rest upon her personal experience as a member of the Facilities Naming Committee of the city of Ekaterinburg. The article seeks to suggest a new approach to the solution of controversial issues of naming city facilities based on territory branding and city image design and promotion concepts. Place names are thus considered as an important informational and communicational resource of creation of a city’s image which means that the naming of concrete city facilities should rely on a holistic urbanonymic conception defining basic features of the city’s identity and ordering themes to be reflected in names. The author argues that the rational long-term urbanonymic policy implies the existence of a consistent image-making strategy. In this case the process of naming and its results could be characterized in terms of ‘urbanonymic design’ considering the naming of city facilities as a part of the construction of the city’s identity. The policy of official naming of city-owned assets must then meet the following requirements: proportionality, functionality, orientation capacity, semantic transparency, harmonicity, which constitute the most significant principles of construction of an urbanonymic system.

76 FR 44985 - Pipeline Safety: Potential for Damage to Pipeline Facilities Caused by Flooding

Science.gov (United States)

2011-07-27

.... PHMSA-2011-0177] Pipeline Safety: Potential for Damage to Pipeline Facilities Caused by Flooding AGENCY... liquid pipelines to communicate the potential for damage to pipeline facilities caused by severe flooding... pipelines in case of flooding. ADDRESSES: This document can be viewed on the Office of Pipeline Safety home...

Extreme E-waste generated from successful Operations Management?

DEFF Research Database (Denmark)

Madsen, Erik Skov; Zhilyaev, Dmitry; Parajuly, Keshav

This paper identifies how research in the field of Operations Management (OM) has been extremely successful in reducing costs for the manufacturing of electrical and electronic equipment by focusing on design for assembly and manufacturing. The downside is the generation of extreme amounts of e......-waste. Based on a literature survey, 2251 kg of e-waste and on case study, this research identifies the need to extend product lifetimes to drive down e-waste. The study concludes that more research is needed on designs for disassembly, repair, refurbishment, and remanufacturing to meet future requirements...

Mine subsidence control projects associated with solid waste disposal facilities

International Nuclear Information System (INIS)

Wood, R.M.

1994-01-01

Pennsylvania environmental regulations require applicant's for solid waste disposal permits to provide information regarding the extent of deep mining under the proposed site, evaluations of the maximum subsidence potential, and designs of measures to mitigate potential subsidence impact on the facility. This paper presents three case histories of deep mine subsidence control projects at solid waste disposal facilities. Each case history presents site specific mine grouting project data summaries which include evaluations of the subsurface conditions from drilling, mine void volume calculations, grout mix designs, grouting procedures and techniques, as well as grout coverage and extent of mine void filling evaluations. The case studies described utilized basic gravity grouting techniques to fill the mine voids and fractured strata over the collapsed portions of the deep mines. Grout mixtures were designed to achieve compressive strengths suitable for preventing future mine subsidence while maintaining high flow characteristics to penetrate fractured strata. Verification drilling and coring was performed in the grouted areas to determine the extent of grout coverage and obtain samples of the in-place grout for compression testing. The case histories presented in this report demonstrate an efficient and cost effective technique for mine subsidence control projects

Considerations about the licensing process of special nuclear industrial facilities

Energy Technology Data Exchange (ETDEWEB)

Talarico, M.A., E-mail: talaricomarco@hotmail.com [Marinha do Brasil, Rio de Janeiro, RJ (Brazil). Coordenacao do Porgrama de Submarino com Propulsao Nuclear; Melo, P.F. Frutuoso e [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear

2015-07-01

This paper brings a discussion about the challenges involved in the development of a new kind of nuclear facility in Brazil, a naval base for nuclear submarines, with attention to the licensing process and considerations about the risk-informed decision making application to the licensing process. Initially, a model of such a naval base, called in this work, special industrial facility, is proposed, with its systems and respective sets of basic requirements, in order to make it possible the accomplishment of the special industrial facility support function to the nuclear submarine. A discussion about current challenges to overcome in this project is presented: the challenges due to the new characteristics of this type of nuclear facility; existence of several interfaces between the special industrial facilities systems and nuclear submarine systems in design activities; lack of specific regulation in Brazil to allow the licensing process of special industrial facilities by the nuclear safety authority; and comments about the lack of information from reference nuclear facilities, as is the case with nuclear power reactors (for example, the German Grafenrheinfeld nuclear plant is the reference plant for the Brazilian Angra 2 nuclear plant). Finally, in view of these challenges, an analysis method of special industrial facility operational scenarios to assist the licensing process is proposed. Also, considerations about the application of risk-informed decision making to the special industrial facility activity and licensing process in Brazil are presented. (author)

Considerations about the licensing process of special nuclear industrial facilities

International Nuclear Information System (INIS)

Talarico, M.A.; Melo, P.F. Frutuoso e

2015-01-01

This paper brings a discussion about the challenges involved in the development of a new kind of nuclear facility in Brazil, a naval base for nuclear submarines, with attention to the licensing process and considerations about the risk-informed decision making application to the licensing process. Initially, a model of such a naval base, called in this work, special industrial facility, is proposed, with its systems and respective sets of basic requirements, in order to make it possible the accomplishment of the special industrial facility support function to the nuclear submarine. A discussion about current challenges to overcome in this project is presented: the challenges due to the new characteristics of this type of nuclear facility; existence of several interfaces between the special industrial facilities systems and nuclear submarine systems in design activities; lack of specific regulation in Brazil to allow the licensing process of special industrial facilities by the nuclear safety authority; and comments about the lack of information from reference nuclear facilities, as is the case with nuclear power reactors (for example, the German Grafenrheinfeld nuclear plant is the reference plant for the Brazilian Angra 2 nuclear plant). Finally, in view of these challenges, an analysis method of special industrial facility operational scenarios to assist the licensing process is proposed. Also, considerations about the application of risk-informed decision making to the special industrial facility activity and licensing process in Brazil are presented. (author)

Animal facilities

International Nuclear Information System (INIS)

Fritz, T.E.; Angerman, J.M.; Keenan, W.G.; Linsley, J.G.; Poole, C.M.; Sallese, A.; Simkins, R.C.; Tolle, D.

1981-01-01

The animal facilities in the Division are described. They consist of kennels, animal rooms, service areas, and technical areas (examining rooms, operating rooms, pathology labs, x-ray rooms, and 60 Co exposure facilities). The computer support facility is also described. The advent of the Conversational Monitor System at Argonne has launched a new effort to set up conversational computing and graphics software for users. The existing LS-11 data acquisition systems have been further enhanced and expanded. The divisional radiation facilities include a number of gamma, neutron, and x-ray radiation sources with accompanying areas for related equipment. There are five 60 Co irradiation facilities; a research reactor, Janus, is a source for fission-spectrum neutrons; two other neutron sources in the Chicago area are also available to the staff for cell biology studies. The electron microscope facilities are also described

Facilities Performance Indicators Report 2013-14: Tracking Your Facilities Vital Signs

Science.gov (United States)

APPA: Association of Higher Education Facilities Officers, 2015

2015-01-01

This paper features an expanded Web-based "Facilities Performance Indicators (FPI) Report." The purpose of APPA: Association of Higher Education Facilities Officers (APPA's) Facilities Performance Indicators is to provide a representative set of statistics about facilities in educational institutions. "The Facilities Performance…

Analysis and consideration for the US criteria of nuclear fuel cycle facilities to resist natural disasters

International Nuclear Information System (INIS)

Shen Hong

2013-01-01

Natural disasters pose a threat to the safety of nuclear facilities. Fukushima nuclear accident tells us that nuclear safety in siting, design and construction shall be strengthened in case of external events caused by natural disasters. This paper first analyzes the DOE criteria of nuclear fuel cycle facilities to resist natural disasters. Then to develop our national criteria for natural disaster resistance of nuclear fuel cycle facilities is suggested, so as to ensure the safety of these facilities. (authors)

Communication grounding facility

International Nuclear Information System (INIS)

Lee, Gye Seong

1998-06-01

It is about communication grounding facility, which is made up twelve chapters. It includes general grounding with purpose, materials thermal insulating material, construction of grounding, super strength grounding method, grounding facility with grounding way and building of insulating, switched grounding with No. 1A and LCR, grounding facility of transmission line, wireless facility grounding, grounding facility in wireless base station, grounding of power facility, grounding low-tenton interior power wire, communication facility of railroad, install of arrester in apartment and house, install of arrester on introduction and earth conductivity and measurement with introduction and grounding resistance.

Dengue surveillance in Veterans Affairs healthcare facilities, 2007-2010.

Directory of Open Access Journals (Sweden)

Patricia L Schirmer

Full Text Available BACKGROUND: Although dengue is endemic in Puerto Rico (PR, 2007 and 2010 were recognized as epidemic years. In the continental United States (US, outside of the Texas-Mexico border, there had not been a dengue outbreak since 1946 until dengue re-emerged in Key West, Florida (FL, in 2009-2010. The objective of this study was to use electronic and manual surveillance systems to identify dengue cases in Veterans Affairs (VA healthcare facilities and then to clinically compare dengue cases in Veterans presenting for care in PR and in FL. METHODOLOGY: Outpatient encounters from 1/2007-12/2010 and inpatient admissions (only available from 10/2009-12/2010 with dengue diagnostic codes at all VA facilities were identified using VA's Electronic Surveillance System for Early Notification of Community-based Epidemics (ESSENCE. Additional case sources included VA data from Centers for Disease Control and Prevention BioSense and VA infection preventionists. Case reviews were performed. Categorical data was compared using Mantel-Haenszel or Fisher Exact tests and continuous variables using t-tests. Dengue case residence was mapped. FINDINGS: Two hundred eighty-eight and 21 PR and FL dengue cases respectively were identified. Of 21 FL cases, 12 were exposed in Key West and 9 were imported. During epidemic years, FL cases had significantly increased dengue testing and intensive care admissions, but lower hospitalization rates and headache or eye pain symptoms compared to PR cases. There were no significant differences in clinical symptoms, laboratory abnormalities or outcomes between epidemic and non-epidemic year cases in FL and PR. Confirmed/probable cases were significantly more likely to be hospitalized and have thrombocytopenia or leukopenia compared to suspected cases. CONCLUSIONS: Dengue re-introduction in the continental US warrants increased dengue surveillance and education in VA. Throughout VA, under-testing of suspected cases highlights the need to

The Sanford Underground Research Facility at Homestake

International Nuclear Information System (INIS)

Heise, J.

2015-01-01

The former Homestake gold mine in Lead, South Dakota, has been transformed into a dedicated facility to pursue underground research in rare-process physics, as well as offering research opportunities in other disciplines such as biology, geology and engineering. A key component of the Sanford Underground Research Facility (SURF) is the Davis Campus, which is in operation at the 4850-foot level (4300 m.w.e.) and currently hosts two main physics projects: the LUX dark matter experiment and the MAJORANA DEMONSTRATOR neutrinoless double-beta decay experiment. In addition, two low-background counters currently operate at the Davis Campus in support of current and future experiments. Expansion of the underground laboratory space is underway at the 4850L Ross Campus in order to maintain and enhance low-background assay capabilities as well as to host a unique nuclear astrophysics accelerator facility. Plans to accommodate other future experiments at SURF are also underway and include the next generation of direct-search dark matter experiments and the Fermilab-led international long-baseline neutrino program. Planning to understand the infrastructure developments necessary to accommodate these future projects is well advanced and in some cases have already started. SURF is a dedicated research facility with significant expansion capability

The Sanford Underground Research Facility at Homestake

International Nuclear Information System (INIS)

Heise, J

2015-01-01

The former Homestakegold mine in Lead, South Dakota has been transformed into a dedicated facility to pursue underground research in rare-process physics, as well as offering research opportunities in other disciplines such as biology, geology and engineering. A key component of the Sanford Underground Research Facility (SURF) is the Davis Campus, which is in operation at the 4850-foot level (4300 m.w.e.) and currently hosts two main physics projects: the LUX dark matter experiment and the MAJORANA DEMONSTRATOR neutrinolessdouble-beta decay experiment. In addition, two low-background counters currently operate at the Davis Campus in support of current and future experiments. Expansion of the underground laboratory space is underway at the 4850L Ross Campus in order to maintain and enhance low- background assay capabilities as well as to host a unique nuclear astrophysics accelerator facility. Plans to accommodate other future experiments at SURF are also underway and include the next generation of direct-search dark matter experiments and the Fermilab-led international long- baseline neutrino program. Planning to understand the infrastructure developments necessary to accommodate these future projects is well advanced and in some cases have already started. SURF is a dedicated research facility with significant expansion capability. (paper)

Training manual for process operation and management of radioactive waste treatment facility

Energy Technology Data Exchange (ETDEWEB)

Shon, J. S.; Kim, K. J.; Ahn, S. J. [and others

2004-12-01

Radioactive Waste Treatment Facility (RWTF) has been operating for safe and effective treatment of radioactive wastes generated in the Korea Atomic Energy Research Institute (KAERI). In RWTF, there are evaporation, bituminization and solar evaporation processes for liquid waste, solid waste treatment process and laundry process. As other radioactive waste treatment facilities in foreign countries, the emergency situation such as fire and overflow of liquid waste can be taken place during the operation and result in the spread of contamination of radioactivity. So, easy and definite operating procedure is necessary for the safe operation of the facility. This manual can be available as easy and concise training materials for new employees and workers dispatched from service agency. Especially, in case of emergency urgently occurred during operation, everyone working in the facility can quickly stop the facility following this procedure.

Training manual for process operation and management of radioactive waste treatment facility

International Nuclear Information System (INIS)

Shon, J. S.; Kim, K. J.; Ahn, S. J.

2004-12-01

Radioactive Waste Treatment Facility (RWTF) has been operating for safe and effective treatment of radioactive wastes generated in the Korea Atomic Energy Research Institute (KAERI). In RWTF, there are evaporation, bituminization and solar evaporation processes for liquid waste, solid waste treatment process and laundry process. As other radioactive waste treatment facilities in foreign countries, the emergency situation such as fire and overflow of liquid waste can be taken place during the operation and result in the spread of contamination of radioactivity. So, easy and definite operating procedure is necessary for the safe operation of the facility. This manual can be available as easy and concise training materials for new employees and workers dispatched from service agency. Especially, in case of emergency urgently occurred during operation, everyone working in the facility can quickly stop the facility following this procedure

The benefits of Outsourcing facility services when selecting right service provider for a hotel:Case Kämp Group Oy

OpenAIRE

Paudyal, Manoj; Acharya, Saroj

2015-01-01

This research paper examines about the outsourcing of facility services in the Kämp group of hotels. The scope of the study includes Facility Management, outsourcing facilities services, and the selection process of the service providers for a hotel. The research was carried at the hotels of Kämp group Oy in the Metropolitan Area of Helsinki. Facility management includes wide ranges of non-core functions such as Property management, real estates, design and technology. Activities such as secu...

Facility effluent monitoring plan for the 327 Facility

International Nuclear Information System (INIS)

1994-11-01

The 327 Facility [Post-Irradiation Testing Laboratory] provides office and laboratory space for Pacific Northwest Laboratory (PNL) scientific and engineering staff conducting multidisciplinary research in the areas of post-irradiated fuels and structural materials. The facility is designed to accommodate the use of radioactive and hazardous materials in the conduct of these activities. This report summarizes the airborne emissions and liquid effluents and the results of the Facility Effluent Monitoring Plan (FEMP) determination for the facility. The complete monitoring plan includes characterization of effluent streams, monitoring/sampling design criteria, a description of the monitoring systems and sample analysis, and quality assurance requirements

Integrated Electrical and Thermal Grid Facility - Testing of Future Microgrid Technologies

Directory of Open Access Journals (Sweden)

Sundar Raj Thangavelu

2015-09-01

Full Text Available This paper describes the Experimental Power Grid Centre (EPGC microgrid test facility, which was developed to enable research, development and testing for a wide range of distributed generation and microgrid technologies. The EPGC microgrid facility comprises a integrated electrical and thermal grid with a flexible and configurable architecture, and includes various distributed energy resources and emulators, such as generators, renewable, energy storage technologies and programmable load banks. The integrated thermal grid provides an opportunity to harness waste heat produced by the generators for combined heat, power and cooling applications, and support research in optimization of combined electrical-thermal systems. Several case studies are presented to demonstrate the testing of different control and operation strategies for storage systems in grid-connected and islanded microgrids. One of the case studies also demonstrates an integrated thermal grid to convert waste heat to useful energy, which thus far resulted in a higher combined energy efficiency. Experiment results confirm that the facility enables testing and evaluation of grid technologies and practical problems that may not be apparent in a computer simulated environment.

Plant model of KIPT neutron source facility simulator

International Nuclear Information System (INIS)

Cao, Yan; Wei, Thomas Y.; Grelle, Austin L.; Gohar, Yousry

2016-01-01

Argonne National Laboratory (ANL) of the United States and Kharkov Institute of Physics and Technology (KIPT) of Ukraine are collaborating on constructing a neutron source facility at KIPT, Kharkov, Ukraine. The facility has 100-kW electron beam driving a subcritical assembly (SCA). The electron beam interacts with a natural uranium target or a tungsten target to generate neutrons, and deposits its power in the target zone. The total fission power generated in SCA is about 300 kW. Two primary cooling loops are designed to remove 100-kW and 300-kW from the target zone and the SCA, respectively. A secondary cooling system is coupled with the primary cooling system to dispose of the generated heat outside the facility buildings to the atmosphere. In addition, the electron accelerator has a low efficiency for generating the electron beam, which uses another secondary cooling loop to remove the generated heat from the accelerator primary cooling loop. One of the main functions the KIPT neutron source facility is to train young nuclear specialists; therefore, ANL has developed the KIPT Neutron Source Facility Simulator for this function. In this simulator, a Plant Control System and a Plant Protection System were developed to perform proper control and to provide automatic protection against unsafe and improper operation of the facility during the steady-state and the transient states using a facility plant model. This report focuses on describing the physics of the plant model and provides several test cases to demonstrate its capabilities. The plant facility model uses the PYTHON script language. It is consistent with the computer language of the plant control system. It is easy to integrate with the simulator without an additional interface, and it is able to simulate the transients of the cooling systems with system control variables changing on real-time.

A systems analysis approach to nuclear facility siting

International Nuclear Information System (INIS)

Gros, J.G.; Avenhaus, R.; Linnerooth, J.; Pahner, P.D.; Otway, H.J.

1975-01-01

An attempt is made to demonstrate an application of the techniques of systems analysis, which have been successful in solving a variety of problems, to nuclear facility siting. Within the framework of an overall regional land-use plan, a methodology for establishing the acceptability of a combination of site and facility is discussed. The consequences (e.g. the energy produced, thermal and chemical discharges, radioactive releases, aeshetic values, etc.) of the site-facility combination are identified and compared with formalized criteria in order to ensure 'legal acceptability'. Failure of any consequences to satisfy standard requirements results in a feedback channel which works to effect design changes in the facility. When 'legal acceptability' has been assured, the project enters the public sector for consideration. The responses of individuals and of various interested groups to the external attributes of the nuclear facility gradually emerge. The criteria by which interest groups judge technological advances reflect both their rational assessment and unconscious motivations. This process operates on individual, group, societal and international levels and may result in two basic feedback loops: one which might act to change regulatory criteria; the other which might influence facility design or site selection. Such reactions and responses on these levels result in a continuing process of confrontation, collaborative interchange and possible resolution in the direction of an acceptable solution. Finally, a Paretian approach to optimizing the site-facility combination is presented for the case where there are several possible combinations of site and facility. A hypothetical example of the latter is given, based upon typical preference functions determined for four interest groups. The research effort of the IIASA Energy Systems Project and the Joint IAEA/IIASA Research Project in the area of nuclear siting is summarized. (author)

Plant model of KIPT neutron source facility simulator

Energy Technology Data Exchange (ETDEWEB)

Cao, Yan [Argonne National Lab. (ANL), Argonne, IL (United States); Wei, Thomas Y. [Argonne National Lab. (ANL), Argonne, IL (United States); Grelle, Austin L. [Argonne National Lab. (ANL), Argonne, IL (United States); Gohar, Yousry [Argonne National Lab. (ANL), Argonne, IL (United States)

2016-02-01

Argonne National Laboratory (ANL) of the United States and Kharkov Institute of Physics and Technology (KIPT) of Ukraine are collaborating on constructing a neutron source facility at KIPT, Kharkov, Ukraine. The facility has 100-kW electron beam driving a subcritical assembly (SCA). The electron beam interacts with a natural uranium target or a tungsten target to generate neutrons, and deposits its power in the target zone. The total fission power generated in SCA is about 300 kW. Two primary cooling loops are designed to remove 100-kW and 300-kW from the target zone and the SCA, respectively. A secondary cooling system is coupled with the primary cooling system to dispose of the generated heat outside the facility buildings to the atmosphere. In addition, the electron accelerator has a low efficiency for generating the electron beam, which uses another secondary cooling loop to remove the generated heat from the accelerator primary cooling loop. One of the main functions the KIPT neutron source facility is to train young nuclear specialists; therefore, ANL has developed the KIPT Neutron Source Facility Simulator for this function. In this simulator, a Plant Control System and a Plant Protection System were developed to perform proper control and to provide automatic protection against unsafe and improper operation of the facility during the steady-state and the transient states using a facility plant model. This report focuses on describing the physics of the plant model and provides several test cases to demonstrate its capabilities. The plant facility model uses the PYTHON script language. It is consistent with the computer language of the plant control system. It is easy to integrate with the simulator without an additional interface, and it is able to simulate the transients of the cooling systems with system control variables changing on real-time.

Facility effluent monitoring plan for the 325 Facility

International Nuclear Information System (INIS)

1998-01-01

The Applied Chemistry Laboratory (325 Facility) houses radiochemistry research, radioanalytical service, radiochemical process development, and hazardous and mixed hazardous waste treatment activities. The laboratories and specialized facilities enable work ranging from that with nonradioactive materials to work with picogram to kilogram quantities of fissionable materials and up to megacurie quantities of other radionuclides. The special facilities include two shielded hot-cell areas that provide for process development or analytical chemistry work with highly radioactive materials, and a waste treatment facility for processing hazardous, mixed, low-level, and transuranic wastes generated by Pacific Northwest Laboratory. Radioactive material storage and usage occur throughout the facility and include a large number of isotopes. This material is in several forms, including solid, liquid, particulate, and gas. Some of these materials are also heated during testing which can produce vapors. The research activities have been assigned to the following activity designations: High-Level Hot Cell, Hazardous Waste Treatment Unit, Waste Form Development, Special Testing Projects, Chemical Process Development, Analytical Hot Cell, and Analytical Chemistry. The following summarizes the airborne and liquid effluents and the results of the Facility Effluent Monitoring Plan (FEMP) determination for the facility. The complete monitoring plan includes characterization of effluent streams, monitoring/sampling design criteria, a description of the monitoring systems and sample analysis, and quality assurance requirements

Air Quality Facilities

Data.gov (United States)

Iowa State University GIS Support and Research Facility — Facilities with operating permits for Title V of the Federal Clean Air Act, as well as facilities required to submit an air emissions inventory, and other facilities...

Facilities Performance Indicators Report, 2004-05. Facilities Core Data Survey

Science.gov (United States)

Glazner, Steve, Ed.

2006-01-01

The purpose of "Facilities Performance Indicators" is to provide a representative set of statistics about facilities in educational institutions. The second iteration of the web-based Facilities Core Data Survey was posted and available to facilities professionals at more than 3,000 institutions in the Fall of 2005. The website offered a printed…

Tandem mirror magnet system for the mirror fusion test facility

International Nuclear Information System (INIS)

Bulmer, R.H.; Van Sant, J.H.

1980-01-01

The Tandem Mirror Fusion Test Facility (MFTF-B) will be a large magnetic fusion experimental facility containing 22 supercounducting magnets including solenoids and C-coils. State-of-the-art technology will be used extensively to complete this facility before 1985. Niobium titanium superconductor and stainless steel structural cases will be the principle materials of construction. Cooling will be pool boiling and thermosiphon flow of 4.5 K liquid helium. Combined weight of the magnets will be over 1500 tonnes and the stored energy will be over 1600 MJ. Magnetic field strength in some coils will be more than 8 T. Detail design of the magnet system will begin early 1981. Basic requirements and conceptual design are disclosed in this paper

Improving Energy Efficiency In Thermal Oil Recovery Surface Facilities

Energy Technology Data Exchange (ETDEWEB)

Murthy Nadella, Narayana

2010-09-15

Thermal oil recovery methods such as Cyclic Steam Stimulation (CSS), Steam Assisted Gravity Drainage (SAGD) and In-situ Combustion are being used for recovering heavy oil and bitumen. These processes expend energy to recover oil. The process design of the surface facilities requires optimization to improve the efficiency of oil recovery by minimizing the energy consumption per barrel of oil produced. Optimization involves minimizing external energy use by heat integration. This paper discusses the unit processes and design methodology considering thermodynamic energy requirements and heat integration methods to improve energy efficiency in the surface facilities. A design case study is presented.

Development of cables for nuclear fuel processing facilities

International Nuclear Information System (INIS)

Kamimura, Seiji; Seki, Ikuo; Yamamoto, Yasuaki; Matsuyama, Shigeki; Endo, Shigeru; Yagi, Toshiaki; Kawakami, Waichiro.

1988-01-01

Accompanying the development of nuclear power stations, the expansion and repletion of the facilities for nuclear fuel cycle such as fuel reprocessing facilities and waste treatment facilities are requested. In these facilities, there is the environment which is exposed to very high level radiation, and in this case, the cables withstanding 10 MGy radiation dose are required. As the cables meeting such requirement, the new cables having excellent flexibility and radiation resistance were developed. In this paper, the points of material development and the characteristics of cables are reported. Considering the radiation resistance and others, ethylene propylene rubber was selected as the base polymer of the insulator, and polyethylene chlorosulfonate was selected as the sheath material. In order to give excellent radiation resistance, as the anti-rad, energy transfer type aromatic oil that absorbs and dissipates radiation energy and radical trap type anti-oxidant of amine group that catches and stabilizes the radicals generated in the polymer were added. The bromine group burning retarding agent having excellent radiation resistance was applied. In this way, the cables withstanding high radiation dose up to 10 MGy were able to be developed. (K.I.)

Nuclear facilities

International Nuclear Information System (INIS)

Anon.

2000-01-01

Here is given the decree (2000-1065) of the 25. of October 2000 reporting the publication of the convention between the Government of the French Republic and the CERN concerning the safety of the LHC (Large Hadron Collider) and the SPS (Proton Supersynchrotron) facilities, signed in Geneva on July 11, 2000. By this convention, the CERN undertakes to ensure the safety of the LHC and SPS facilities and those of the operations of the LEP decommissioning. The French legislation and regulations on basic nuclear facilities (concerning more particularly the protection against ionizing radiations, the protection of the environment and the safety of facilities) and those which could be decided later on apply to the LHC, SPS and auxiliary facilities. (O.M.)

Facility effluent monitoring plan for 242-A Evaporator facility

International Nuclear Information System (INIS)

Crummel, G.M.; Gustavson, R.D.

1993-03-01

A facility effluent monitoring plan is required by the US Department of Energy in DOE Order 5400.1* for any operations that involve hazardous materials and radioactive substances that could affect employee or public safety or the environment. A facility effluent monitoring plan determination was performed during Calendar Year 1991 and the evaluation showed the need for a facility effluent monitoring plan. This document is prepared using the specific guidelines identified in A Guide for Preparing Hanford Site Facility effluent Monitoring Plans, WHC-EP-0438-1**. This facility effluent monitoring plan assesses effluent monitoring systems and evaluates whether they are adequate to ensure the public health and safety as specified in applicable federal, state, and local requirements

North Slope, Alaska ESI: FACILITY (Facility Points)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains data for oil field facilities for the North Slope of Alaska. Vector points in this data set represent oil field facility locations. This data...

Radioactive ion beam facilities at INFN LNS

International Nuclear Information System (INIS)

Rifuggiato, D; Calabretta, L; Celona, L; Chines, F; Cosentino, L; Cuttone, G; Finocchiaro, P; Pappalardo, A; Re, M; Rovelli, A

2011-01-01

Radioactive ion beams are produced at INFN- Laboratori Nazionali del Sud (LNS) by means of the two operating accelerators, the Tandem and the Superconducting Cyclotron (CS), originally designed to accelerate stable beams. Both the ISOL (Isotope Separation On Line) and the IFF (In-Flight Fragmentation) methods are exploited to produce RIBs in two different ways at different energies: in the first case, the Cyclotron is the primary accelerator and the Tandem accelerates the secondary beams, while in the second case radioactive fragments are produced by the Cyclotron beam in a thin target with energies comparable to the primary beam energy. The ISOL facility is named EXCYT (Exotics at the Cyclotron and Tandem) and was commissioned in 2006, when the first radioactive beam ( 8 Li) has been produced. The IFF installation is named FRIBs (in Flight Radioactive Ion Beams), and it has started to produce radioactive beams in 2001, placing a thin target in the extraction beam line of the Cyclotron. The development of both facilities to produce and accelerate radioactive ion beams at LNS, is briefly described, with some details on the future prospects that are presently under consideration or realization.

A probabilistic risk assessment of the LLNL Plutonium facility's evaluation basis fire operational accident

International Nuclear Information System (INIS)

Brumburgh, G.

1994-01-01

The Lawrence Livermore National Laboratory (LLNL) Plutonium Facility conducts numerous involving plutonium to include device fabrication, development of fabrication techniques, metallurgy research, and laser isotope separation. A Safety Analysis Report (SAR) for the building 332 Plutonium Facility was completed rational safety and acceptable risk to employees, the public, government property, and the environment. This paper outlines the PRA analysis of the Evaluation Basis Fire (EDF) operational accident. The EBF postulates the worst-case programmatic impact event for the Plutonium Facility

Gas storage facilities. Investigation of their social value

International Nuclear Information System (INIS)

1997-02-01

The socio-economic factors resulting from location of gas storage facilities are evaluated. Various alternatives to the existing projects are estimated, for instance 11 new pipelines, in some cases combined with new production capacity, LNG facilities, differentiated tariffs, reconstruction of decentralized heat/power plants etc. Theoretical considerations and models, among others involving gas storage abroad, are presented. Seasonal storage, emergency storage, storage controlled by economic optimization (profitable purchases, sales at highest market) are described for various types of facilities, like aquifers, caverns and LNG-stores. Natural gas supplies in Europe, infrastructure and resources are compared to the Danish conditions. Sensitivity of the Danish heating market for natural gas consumption is investigated. Reduction in energy use for space heating by 2005 will change the needs of storage of 740 Mm 3 gas to 650 Mm 3 . Extra consumption by the decentralized power/heat plants is not accounted for in this estimation. Dynamic models of the future gas consumption are based on the EU 'European Energy 2020'. (EG)

Magnitude of Malaria and Factors among Febrile Cases in Low Transmission Areas of Hadiya Zone, Ethiopia: A Facility Based Cross Sectional Study.

Directory of Open Access Journals (Sweden)

Romedan Kedir Delil

Full Text Available Despite a remarkable decline in morbidity and mortality since the era of malaria roll back strategy, it still poses a huge challenge in Ethiopia in general and in Hadiya Zone in particular. Although, there are data from routine health management information on few indicators, there is scarcity of data showing magnitude of malaria and associated factors including knowledge and practice in the study area. Therefore, the aim of this study was to assess magnitude and factors affecting malaria in low transmission areas among febrile cases attending public health facilities in Hadiya Zone, Ethiopia.A facility based cross-sectional study was conducted in Hadiya Zone from May 15 to June 15, 2014. Simple random sampling was used to select the health facility while systematic random sampling technique was used to reach febrile patients attending public health facilities. Data were collected by a pre-tested structured questionnaire containing sections of socio demographic risk factors and knowledge and prevention practices of malaria. Data were entered to Epi-Info software version 3.5.4 and exported to SPSS version 16 for descriptive and logistic regression analysis.One hundred six (25.8% of participating febrile patients attending at sampled health facilities were found to have malaria by microscopy. Of which, P.vivax, P.falciparum and mixed infection accounted for 76(71. 7%, 27 (25.5% and 3 (2.8%, respectively. History of travel to malaria endemic area, [AOR: 2.59, 95% CI: (1.24, 5.38], not using bed net, [AOR: 4.67, 95%CI:, (2.11, 10.37], poor practice related to malaria prevention and control, [AOR: 2.28, (95%CI: (1.10, 4.74], poor knowledge about malaria, [AOR: 5.09,95%CI: (2.26,11.50] and estimated distance of stagnant water near to the residence, [AOR: 3.32, (95%CI: (1.13, 9.76] were significantly associated factors of malaria positivity in the study.The present study revealed that malaria is still a major source of morbidity in the study area among

26 CFR 1.142(a)(5)-1 - Exempt facility bonds: Sewage facilities.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 2 2010-04-01 2010-04-01 false Exempt facility bonds: Sewage facilities. 1.142... Bonds § 1.142(a)(5)-1 Exempt facility bonds: Sewage facilities. (a) In general. Under section 103(a), a... in section 142(a) is a sewage facility. This section defines the term sewage facility for purposes of...

The Pinellas Plant RCRA facility investigation - A case study

International Nuclear Information System (INIS)

Kilbury, Richard; Keshian, Berg; Farley, Dwain; Meyer, David; Ingle, David; Biedermann, Charles

1992-01-01

Under the direction of the U.S. Department of Energy Albuquerque Field Office Environmental Restoration Program, a Resource Conservation and Recovery Act (RCRA) Facility Investigation (RFI) was completed at the Pinellas Plant to fulfill requirements of the Hazardous and Solid Waste Amendments of 1984 (HSWA) permit issued on February 9, 1990 by the U.S. Environmental Protection Agency (EPA). This RFI addressed potential contaminant releases and environmental conditions at 15 solid waste management units (SWMUs). The RFI characterization program began in April 1990 and was completed in May 1991. The scope of RFI data collection activities is presented in the Pinellas Plant RFI Workplan issued in May 1990 and approved by EPA on April 16, 1991. An RFI Report was submitted to EPA on September 1, 1991. This paper presents a summary of RFI results and conclusions. Primary environmental concerns at the Pinellas Plant are emphasized. (author)

A safety decision analysis for Saudi Arabian nuclear research facility

International Nuclear Information System (INIS)

Abulfaraj, W.H.; Abdul-Fattah, A.F.

1985-01-01

Establishment of a nuclear research facility should be the first step in planning for introducing the nuclear energy to Saudi Arabia. The fuzzy set decision theory is selected among different decision theories to be applied for this analysis. Four research reactors from USA are selected for the present study. The IFDA computer code, based on the fuzzy set theory is applied. Results reveal that the FNR reactor is the best alternative for the case of Saudi Arabian nuclear research facility, and MITR is the second best. 17 refs

Facility transition instruction

International Nuclear Information System (INIS)

Morton, M.R.

1997-01-01

The Bechtel Hanford, Inc. facility transition instruction was initiated in response to the need for a common, streamlined process for facility transitions and to capture the knowledge and experience that has accumulated over the last few years. The instruction serves as an educational resource and defines the process for transitioning facilities to long-term surveillance and maintenance (S and M). Generally, these facilities do not have identified operations missions and must be transitioned from operational status to a safe and stable configuration for long-term S and M. The instruction can be applied to a wide range of facilities--from process canyon complexes like the Plutonium Uranium Extraction Facility or B Plant, to stand-alone, lower hazard facilities like the 242B/BL facility. The facility transition process is implemented (under the direction of the US Department of Energy, Richland Operations Office [RL] Assistant Manager-Environmental) by Bechtel Hanford, Inc. management, with input and interaction with the appropriate RL division and Hanford site contractors as noted in the instruction. The application of the steps identified herein and the early participation of all organizations involved are expected to provide a cost-effective, safe, and smooth transition from operational status to deactivation and S and M for a wide range of Hanford Site facilities

An evaluation of systematic tuberculosis screening at private facilities in Karachi, Pakistan.

Directory of Open Access Journals (Sweden)

Jacob Creswell

Full Text Available BACKGROUND: In Pakistan, like many Asian countries, a large proportion of healthcare is provided through the private sector. We evaluated a systematic screening strategy to identify people with tuberculosis in private facilities in Karachi and assessed the approaches' ability to diagnose patients earlier in their disease progression. METHODS AND FINDINGS: Lay workers at 89 private clinics and a large hospital outpatient department screened all attendees for tuberculosis using a mobile phone-based questionnaire during one year. The number needed to screen to detect a case of tuberculosis was calculated. To evaluate early diagnosis, we tested for differences in cough duration and smear grading by screening facility. 529,447 people were screened, 1,010 smear-positive tuberculosis cases were detected and 942 (93.3% started treatment, representing 58.7% of all smear-positive cases notified in the intervention area. The number needed to screen to detect a smear-positive case was 124 (prevalence 806/100,000 at the hospital and 763 (prevalence 131/100,000 at the clinics; however, ten times the number of individuals were screened in clinics. People with smear-positive TB detected at the hospital were less likely to report cough lasting 2-3 weeks (RR 0.66 95%CI [0.49-0.90] and more likely to report cough duration >3 weeks (RR 1.10 95%CI [1.03-1.18]. Smear-positive cases at the clinics were less likely to have a +3 grade (RR 0.76 95%CI [0.63-0.92] and more likely to have +1 smear grade (RR 1.24 95%CI [1.02-1.51]. CONCLUSIONS: Tuberculosis screening at private facilities is acceptable and can yield large numbers of previously undiagnosed cases. Screening at general practitioner clinics may find cases earlier than at hospitals although more people must be screened to identify a case of tuberculosis. Limitations include lack of culture testing, therefore underestimating true TB prevalence. Using more sensitive and specific screening and diagnostic tests such

An evaluation of systematic tuberculosis screening at private facilities in Karachi, Pakistan.

Science.gov (United States)

Creswell, Jacob; Khowaja, Saira; Codlin, Andrew; Hashmi, Rabia; Rasheed, Erum; Khan, Mubashir; Durab, Irfan; Mergenthaler, Christina; Hussain, Owais; Khan, Faisal; Khan, Aamir J

2014-01-01

In Pakistan, like many Asian countries, a large proportion of healthcare is provided through the private sector. We evaluated a systematic screening strategy to identify people with tuberculosis in private facilities in Karachi and assessed the approaches' ability to diagnose patients earlier in their disease progression. Lay workers at 89 private clinics and a large hospital outpatient department screened all attendees for tuberculosis using a mobile phone-based questionnaire during one year. The number needed to screen to detect a case of tuberculosis was calculated. To evaluate early diagnosis, we tested for differences in cough duration and smear grading by screening facility. 529,447 people were screened, 1,010 smear-positive tuberculosis cases were detected and 942 (93.3%) started treatment, representing 58.7% of all smear-positive cases notified in the intervention area. The number needed to screen to detect a smear-positive case was 124 (prevalence 806/100,000) at the hospital and 763 (prevalence 131/100,000) at the clinics; however, ten times the number of individuals were screened in clinics. People with smear-positive TB detected at the hospital were less likely to report cough lasting 2-3 weeks (RR 0.66 95%CI [0.49-0.90]) and more likely to report cough duration >3 weeks (RR 1.10 95%CI [1.03-1.18]). Smear-positive cases at the clinics were less likely to have a +3 grade (RR 0.76 95%CI [0.63-0.92]) and more likely to have +1 smear grade (RR 1.24 95%CI [1.02-1.51]). Tuberculosis screening at private facilities is acceptable and can yield large numbers of previously undiagnosed cases. Screening at general practitioner clinics may find cases earlier than at hospitals although more people must be screened to identify a case of tuberculosis. Limitations include lack of culture testing, therefore underestimating true TB prevalence. Using more sensitive and specific screening and diagnostic tests such as chest x-ray and Xpert MTB/RIF may improve results.

ESF [Exploratory Shaft Facility] impact evaluation report: Volume 1, Final report

International Nuclear Information System (INIS)

1985-08-01

This report assesses the impacts of integrating an Exploratory Shaft Facility (ESF) with a high-level nuclear waste repository in salt. A general repository subsurface design is described which complies with the Mine Safety and Health Administration regulations for gassy metal and non-metal mines. This design is combined with the ESF into a site-specific subsurface layout with associated shafts and surface facilities for each of seven sites. An evaluation to identify integration impacts is described for two specific ESF configurations (Cases 1 and 2) for each of the seven sites. These configurations are an ESF which uses two of the full size repository shafts, and an ESF with one 10-ft and one 22-ft diameter shaft. An evaluation of an ESF configuration (Case 3) with two 12-ft diameter shafts at three of the seven sites is also described. These sites are Deaf Smith, Davis Canyon, and Richton Dome. A fourth evaluation (Case 4) for the Deaf Smith site only, addresses a ''fast track'' subsurface development plan to allow waste emplacement by 1998. A fifth evaluation (Case 5), provides site-specific ES locations, for the three sites included in Case 3, which are supportive of a shaft siting study prepared by ONWI

Present state of inspection robot technology in nuclear power facilities. Case of fast breeder reactors

International Nuclear Information System (INIS)

Ara, Kuniaki

1995-01-01

In the maintenance works in nuclear power facilities such as checkup, inspection and repair, for the main purpose of radiation protection, remote operation technology was introduced since relatively early stage, and at present, the robots that carry out the inspection works for confirming the soundness of main equipment have been developed and put to practical use. At the time of introducing these technologies, in addition to the research and development of robots proper, the coordination with the design of plant machinery and equipment facilities as the premise of introducing robots is an important requirement. In this report, the present state of the development of remote inspection technology for fast breeder reactors is introduced, and the matters to which attention is paid in the plant design for introducing robots are explained. First, fast breeder reactors are described. The needs of robotizing and adopting remote operation in nuclear power facilities are explained, using the examples of the inspection system for a reactor vessel and the inspection system for steam generator heat transfer tubes. (K.I.)

Regionalised tertiary psychiatric residential facilities.

Science.gov (United States)

Lesage, Alain; Groden, David; Goldner, Elliot M; Gelinas, Daniel; Arnold, Leslie M

2008-01-01

Psychiatric hospitals remain the main venue for long-term mental health care and, despite widespread closures and downsizing, no country that built asylums in the last century has done away with them entirely--with the recent exception of Italy. Differentiated community-based residential alternatives have been developed over the past decades, with staffing levels that range from full-time professional, to daytime only, to part-time/on-call. This paper reviews the characteristics of community-based psychiatric residential care facilities as an alternative to long-term care in psychiatric hospitals. It describes five factors decision makers should consider: 1. number of residential places needed; 2. staffing levels; 3. physical setting; 4. programming; and 5. governance and financing. In Italy, facilities with full-time professional staff have been developed since the mid-1990s to accommodate the last cohorts of patients discharged from psychiatric hospitals. In the United Kingdom, experiments with hostel wards since the 1980s have shown that home-like, small-scale facilities with intensive treatment and rehabilitation programming can be effective for the most difficult-to-place patients. More recently in Australia, Community Care Units (CCUs) have been applying this concept. In the Canadian province of British Columbia (BC), Tertiary Psychiatric Residential Facilities (TPRFs) have been developed as part of an effort to regionalise health and social services and downsize and ultimately close its only psychiatric hospital. This type of service must be further developed in addition to the need for forensic, acute-care and intermediate-level beds, as well as for community-based care such as assertive community treatment and intensive case management. All these types of services, together with long-term community-based residential care, constitute the elements of a balanced mental health care system. As part of a region's balanced mental health care plan, these Tertiary

The evolution of facility management business models in supplier–client relationships

DEFF Research Database (Denmark)

Nardelli, Giulia; Rajala, Risto

2018-01-01

Purpose – The study improves the current understanding of business model innovation by outlining how business models unfold over time within supplier–client relationships in facilities management (FM) services. Design/methodology/approach – This study of FM services in Denmark consists...... of an explorative case study and three case studies of facilities management clients. Both phases, related and overlapping, involved collection and analysis of in-depth, semi-structured interviews and archive data. Findings – Findings shows that business model innovation entails interorganisational collaboration...... consequences of changes in the ecosystem. Originality/value – This paper introduces new thinking on the subject of business model innovation to the context of FM. It presents the external orientation of FM business models as a way to combine planned and emergent business model innovation through...

Facilities Performance Indicators Report 2012-13: Tracking Your Facilities Vital Signs

Science.gov (United States)

APPA: Association of Higher Education Facilities Officers, 2014

2014-01-01

This paper features an expanded Web-based "Facilities Performance Indicators (FPI) Report." The purpose of APPA's Facilities Performance Indicators is to provide a representative set of statistics about facilities in educational institutions. "The Facilities Performance Indicators Report" is designed for survey…

Fermilab Test Beam Facility Annual Report. FY 2014

Energy Technology Data Exchange (ETDEWEB)

Brandt, A. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States). et al.

2015-01-01

Fermilab Test Beam Facility (FTBF) operations are summarized for FY 2014. It is one of a series of publications intended to gather information in one place. In this case, the information concerns the individual experiments that ran at FTBF. Each experiment section was prepared by the relevant authors, and was edited for inclusion in this summary.

Guide to research facilities

Energy Technology Data Exchange (ETDEWEB)

1993-06-01

This Guide provides information on facilities at US Department of Energy (DOE) and other government laboratories that focus on research and development of energy efficiency and renewable energy technologies. These laboratories have opened these facilities to outside users within the scientific community to encourage cooperation between the laboratories and the private sector. The Guide features two types of facilities: designated user facilities and other research facilities. Designated user facilities are one-of-a-kind DOE facilities that are staffed by personnel with unparalleled expertise and that contain sophisticated equipment. Other research facilities are facilities at DOE and other government laboratories that provide sophisticated equipment, testing areas, or processes that may not be available at private facilities. Each facility listing includes the name and phone number of someone you can call for more information.

Analysis of the organization implemented by a nuclear operator for ensuring the safety of his facilities: contribution of case studies

International Nuclear Information System (INIS)

Jeffroy, F.; Conte, D.

2006-01-01

This article is the chapter 6 of this book. It deals with the organization implemented by a nuclear operator and its suitability in warranting the safety of his facilities. An analysis approach has been defined which takes into consideration the formal aspect of the rules, structures and resources implemented by the organization, and which considers also the operational aspect through the collective activity of actors. The operation dynamics of the organisation has been approached through retrospective case studies aiming at understanding, from actors' contributions to the processing of events, how the characteristics of the organization were representing resources or constraints for the actors. This approach of organization through case studies must be put forward in the present day debate about cognitive ergonomics in sociology of organizations and in management. Several works try to put in relation the activity of 'front line' actors with the decisions and orientations taken at the strategic level. This supposes that one can combine an analysis of actors' activity integrating their point of view and and analysis of the structures and resources that are supplied to them by the organization. (J.S.)

Experimental Fuels Facility Re-categorization Based on Facility Segmentation

Energy Technology Data Exchange (ETDEWEB)

Reiss, Troy P.; Andrus, Jason

2016-07-01

The Experimental Fuels Facility (EFF) (MFC-794) at the Materials and Fuels Complex (MFC) located on the Idaho National Laboratory (INL) Site was originally constructed to provide controlled-access, indoor storage for radiological contaminated equipment. Use of the facility was expanded to provide a controlled environment for repairing contaminated equipment and characterizing, repackaging, and treating waste. The EFF facility is also used for research and development services, including fuel fabrication. EFF was originally categorized as a LTHC-3 radiological facility based on facility operations and facility radiological inventories. Newly planned program activities identified the need to receive quantities of fissionable materials in excess of the single parameter subcritical limit in ANSI/ANS-8.1, “Nuclear Criticality Safety in Operations with Fissionable Materials Outside Reactors” (identified as “criticality list” quantities in DOE-STD-1027-92, “Hazard Categorization and Accident Analysis Techniques for Compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports,” Attachment 1, Table A.1). Since the proposed inventory of fissionable materials inside EFF may be greater than the single parameter sub-critical limit of 700 g of U-235 equivalent, the initial re-categorization is Hazard Category (HC) 2 based upon a potential criticality hazard. This paper details the facility hazard categorization performed for the EFF. The categorization was necessary to determine (a) the need for further safety analysis in accordance with LWP-10802, “INL Facility Categorization,” and (b) compliance with 10 Code of Federal Regulations (CFR) 830, Subpart B, “Safety Basis Requirements.” Based on the segmentation argument presented in this paper, the final hazard categorization for the facility is LTHC-3. Department of Energy Idaho (DOE-ID) approval of the final hazard categorization determined by this hazard assessment document (HAD) was required per the

Preliminary technical data summary No. 3 for the Defense Waste Processing Facility

International Nuclear Information System (INIS)

Landon, L.F.

1980-05-01

This document presents an update on the best information presently available for the purpose of establishing the basis for the design of a Defense Waste Processing Facility. Objective of this project is to provide a facility to fix the radionuclides present in Savannah River Plant (SRP) high-level liquid waste in a high-integrity form (glass). Flowsheets and material balances reflect the alternate CAB case including the incorporation of low-level supernate in concrete

Hanford Facility dangerous waste permit application, liquid effluent retention facility and 200 area effluent treatment facility

International Nuclear Information System (INIS)

Coenenberg, J.G.

1997-01-01

The Hanford Facility Dangerous Waste Permit Application is considered to 10 be a single application organized into a General Information Portion (document 11 number DOE/RL-91-28) and a Unit-Specific Portion. The scope of the 12 Unit-Specific Portion is limited to Part B permit application documentation 13 submitted for individual, 'operating' treatment, storage, and/or disposal 14 units, such as the Liquid Effluent Retention Facility and 200 Area Effluent 15 Treatment Facility (this document, DOE/RL-97-03). 16 17 Both the General Information and Unit-Specific portions of the Hanford 18 Facility Dangerous Waste Permit Application address the content of the Part B 19 permit application guidance prepared by the Washington State Department of 20 Ecology (Ecology 1987 and 1996) and the U.S. Environmental Protection Agency 21 (40 Code of Federal Regulations 270), with additional information needs 22 defined by the Hazardous and Solid Waste Amendments and revisions of 23 Washington Administrative Code 173-303. For ease of reference, the Washington 24 State Department of Ecology alpha-numeric section identifiers from the permit 25 application guidance documentation (Ecology 1996) follow, in brackets, the 26 chapter headings and subheadings. A checklist indicating where information is 27 contained in the Liquid Effluent Retention Facility and 200 Area Effluent 28 Treatment Facility permit application documentation, in relation to the 29 Washington State Department of Ecology guidance, is located in the Contents 30 Section. 31 32 Documentation contained in the General Information Portion is broader in 33 nature and could be used by multiple treatment, storage, and/or disposal units 34 (e.g., the glossary provided in the General Information Portion). Wherever 35 appropriate, the Liquid Effluent Retention Facility and 200 Area Effluent 36 Treatment Facility permit application documentation makes cross-reference to 37 the General Information Portion, rather than duplicating

Hanford Facility dangerous waste permit application, liquid effluent retention facility and 200 area effluent treatment facility

Energy Technology Data Exchange (ETDEWEB)

Coenenberg, J.G.

1997-08-15

The Hanford Facility Dangerous Waste Permit Application is considered to 10 be a single application organized into a General Information Portion (document 11 number DOE/RL-91-28) and a Unit-Specific Portion. The scope of the 12 Unit-Specific Portion is limited to Part B permit application documentation 13 submitted for individual, `operating` treatment, storage, and/or disposal 14 units, such as the Liquid Effluent Retention Facility and 200 Area Effluent 15 Treatment Facility (this document, DOE/RL-97-03). 16 17 Both the General Information and Unit-Specific portions of the Hanford 18 Facility Dangerous Waste Permit Application address the content of the Part B 19 permit application guidance prepared by the Washington State Department of 20 Ecology (Ecology 1987 and 1996) and the U.S. Environmental Protection Agency 21 (40 Code of Federal Regulations 270), with additional information needs 22 defined by the Hazardous and Solid Waste Amendments and revisions of 23 Washington Administrative Code 173-303. For ease of reference, the Washington 24 State Department of Ecology alpha-numeric section identifiers from the permit 25 application guidance documentation (Ecology 1996) follow, in brackets, the 26 chapter headings and subheadings. A checklist indicating where information is 27 contained in the Liquid Effluent Retention Facility and 200 Area Effluent 28 Treatment Facility permit application documentation, in relation to the 29 Washington State Department of Ecology guidance, is located in the Contents 30 Section. 31 32 Documentation contained in the General Information Portion is broader in 33 nature and could be used by multiple treatment, storage, and/or disposal units 34 (e.g., the glossary provided in the General Information Portion). Wherever 35 appropriate, the Liquid Effluent Retention Facility and 200 Area Effluent 36 Treatment Facility permit application documentation makes cross-reference to 37 the General Information Portion, rather than duplicating

Conceptual development of a test facility for spent fuel management

Energy Technology Data Exchange (ETDEWEB)

Park, S.W.; Lee, H.H.; Lee, J.Y.; Lee, J.S.; Ro, S.G. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1997-12-31

Spent fuel management is an important issue for nuclear power program, requiring careful planning and implementation. With the wait-and-see policy on spent fuel management in Korea, research efforts are directed at KAERI to develop advanced technologies for safer and more efficient management of the accumulating spent fuels. In support of these research perspectives, a test facility of pilot scale is being developed with provisions for integral demonstration of a multitude of technical functions required for spent fuel management. The facility, baptized SMART (Spent fuel MAnagement technology Research and Test facility), is to be capable of handling full size assembly of spent PWR fuel (as well as CANDU fuel) with a maximum capacity of 10 MTU/y (about 24 assemblies of PWR type). Major functions of the facility are consolidation of spent PWR fuel assembly into a half-volume package and optionally transformation of the fuel rod into a fuel of CANDU type (called DUPIC). Objectives of these functions are to demonstrate volume reduction of spent fuel (for either longer-term dry storage or direct disposal ) in the former case and direct refabrication of the spent PWR fuel into CANDU-type DUPIC fuel for reuse in CANDU reactors in the latter case, respectively. In addition to these major functions, there are other associated technologies to be demonstrated : such as waste treatment, remote maintenance, safeguards, etc. As the facility is to demonstrate not only the functional processes but also the safety and efficiency of the test operations, engineering criteria equivalent to industrial standards are incorporated in the design concept. The hot cell structure enclosing the radioactive materials is configured in such way to maximize costs within the given functional and operational requirements. (author). 3 tabs., 4 figs.

Conceptual development of a test facility for spent fuel management

International Nuclear Information System (INIS)

Park, S.W.; Lee, H.H.; Lee, J.Y.; Lee, J.S.; Ro, S.G.

1997-01-01

Spent fuel management is an important issue for nuclear power program, requiring careful planning and implementation. With the wait-and-see policy on spent fuel management in Korea, research efforts are directed at KAERI to develop advanced technologies for safer and more efficient management of the accumulating spent fuels. In support of these research perspectives, a test facility of pilot scale is being developed with provisions for integral demonstration of a multitude of technical functions required for spent fuel management. The facility, baptized SMART (Spent fuel MAnagement technology Research and Test facility), is to be capable of handling full size assembly of spent PWR fuel (as well as CANDU fuel) with a maximum capacity of 10 MTU/y (about 24 assemblies of PWR type). Major functions of the facility are consolidation of spent PWR fuel assembly into a half-volume package and optionally transformation of the fuel rod into a fuel of CANDU type (called DUPIC). Objectives of these functions are to demonstrate volume reduction of spent fuel (for either longer-term dry storage or direct disposal ) in the former case and direct refabrication of the spent PWR fuel into CANDU-type DUPIC fuel for reuse in CANDU reactors in the latter case, respectively. In addition to these major functions, there are other associated technologies to be demonstrated : such as waste treatment, remote maintenance, safeguards, etc. As the facility is to demonstrate not only the functional processes but also the safety and efficiency of the test operations, engineering criteria equivalent to industrial standards are incorporated in the design concept. The hot cell structure enclosing the radioactive materials is configured in such way to maximize costs within the given functional and operational requirements. (author). 3 tabs., 4 figs

Facility effluent monitoring plan for 242-A evaporator facility

International Nuclear Information System (INIS)

Crummel, G.M.; Gustavson, R.D.

1995-02-01

A facility effluent monitoring plan is required by the U.S. Department of Energy in DOE Order 5400.1 for any operations that involve hazardous materials and radioactive substances that could affect employee or public safety or the environment. A facility effluent monitoring plan determination was performed during Calendar Year 1991 and the evaluation showed the need for a facility effluent monitoring plan. This document is prepared using the specific guidelines identified in A Guide for Preparing Hanford Site Facility Effluent Monitoring Plans, WHC-EP-0438-1. This facility effluent monitoring plan assesses effluent monitoring systems and evaluates whether they are adequate to ensure the public health and safety as specified in applicable federal, state, and local requirements. This facility effluent monitoring plan shall ensure long-range integrity of the effluent monitoring systems by requiring an update whenever a new process or operation introduces new hazardous materials or significant radioactive materials. This document must be reviewed annually even if there are no operational changes, and it must be updated, as a minimum, every three years

GERDA test facility for pressurized water reactors with straight tube steam generators

International Nuclear Information System (INIS)

Ahrens, G.; Haury, G.; Lahner, K.; Schatz, A.

1983-01-01

A number of large-scale experimental facilities have been constructed and operate in order to experiment on the thermodynamic and thermohydraulic behaviour of nuclear facilities in case of LOCA. Most of them were designed for ''large leak'' accidents, but as ''small leak'' accidents became the focus of interest, such experiments were also carried out. Experiments carried out with this arrangement for PWR-type reactors with straight-tube steam generators are only partially evaluable. BBR and B and W therefore cooperated in the construction of the test facility GERDA, designed for testing reactors of BBR design. It supplied relevant experimental results for the nuclear power plant at Muelheim-Kaerlich. (orig.) [de

Reliable Biomass Supply Chain Design under Feedstock Seasonality and Probabilistic Facility Disruptions

Directory of Open Access Journals (Sweden)

Zhixue Liu

2017-11-01

Full Text Available While biomass has been recognized as an important renewable energy source which has a range of positive impacts on the economy, environment, and society, the existence of feedstock seasonality and risk of service disruptions at collection facilities potentially compromises the efficiency and reliability of the energy supply system. In this paper, we consider reliable supply chain design for biomass collection against feedstock seasonality and time-varying disruption risks. We optimize facility location, inventory, biomass quantity, and shipment decisions in a multi-period planning horizon setting. A real-world case in Hubei, China is studied to offer managerial insights. Our computational results show that: (1 the disruption risk significantly affects both the optimal facility locations and the supply chain cost; (2 no matter how the failure probability changes, setting backup facilities can significantly decrease the total cost; and (3 the feedstock seasonality does not affect locations of the collection facilities, but it affects the allocations of collection facilities and brings higher inventory cost for the biomass supply chain.

On-site habitability in the event of an accident at a nuclear facility

International Nuclear Information System (INIS)

1989-01-01

This publication is intended to provide technical guidance and a methodology for regulatory bodies, designers, constructors and operators of nuclear facilities to assist them in assessing the current situation as regards on-site habitability for their specific nuclear facilities. Initially, the aim will be to ensure that the ''vital areas'' of the facility which are necessary for the safe operation and shutdown of the facility will remain habitable, in some cases continuously and in others transiently, in the event of an accident inside or outside the installation. The assessment procedure can be used not only for potential radiation accidents but also to consider the effects on habitability of those probable non-radiological events which, if not correctly and effectively countered, could lead to the development of potentially unsafe conditions in the facility itself. 30 refs, 4 figs, 8 tabs

EPA Facility Registry Service (FRS): Facility Interests Dataset

Data.gov (United States)

U.S. Environmental Protection Agency — This web feature service consists of location and facility identification information from EPA's Facility Registry Service (FRS) for all sites that are available in...

Facility and market factors affecting transitions from nursing home to community.

Science.gov (United States)

Arling, Greg; Abrahamson, Kathleen A; Cooke, Valerie; Kane, Robert L; Lewis, Teresa

2011-09-01

Research into nursing home transitions has given limited attention to the facility or community contexts. To identify facility and market factors affecting transitions of nursing home residents back to the community. Multilevel models were used to estimate effects of facility and market factors on facility-level community discharge rates after controlling for resident demographic, health, and functional conditions. Facility discharge rates were adjusted using Empirical Bayes estimation. Annual cohort of first-time admissions (N=24,648) to 378 Minnesota nursing facilities in 75 nursing home markets from July 2005 to June 2006. Community discharge within 90 days of admission; facility occupancy, payer mix, ownership, case-mix acuity, size, admissions from hospitals, nurse staffing level, and proportion of admissions preferring or having support to return to the community; and nursing market population size, average occupancy, market concentration, and availability of home and community-based services. Rates of community discharge (Empirical Bayes residual) were highest in facilities with more residents preferring community discharge, more Medicare days, higher nurse staffing levels, and higher occupancy. In addition, facilities had higher community discharge rates if they were located in markets with a greater ratio of home and community-based services recipients to nursing home residents and with larger populations. State Medicaid programs should undertake system-level interventions that encourage nursing facilities to reduce unused bed capacity, balance the mix of payers, invest in nurse staffing, and take other steps to promote community discharges. In addition, states should increase home and community-based services, particularly in markets with low community discharge rates.

Efficient rehabilitation care for joint replacement patients: skilled nursing facility or inpatient rehabilitation facility?

Science.gov (United States)

Tian, Wenqiang; DeJong, Gerben; Horn, Susan D; Putman, Koen; Hsieh, Ching-Hui; DaVanzo, Joan E

2012-01-01

There has been lengthy debate as to which setting, skilled nursing facility (SNF) or inpatient rehabilitation facility (IRF), is more efficient in treating joint replacement patients. This study aims to determine the efficiency of rehabilitation care provided by SNF and IRF to joint replacement patients with respect to both payment and length of stay (LOS). This study used a prospective multisite observational cohort design. Tobit models were used to examine the association between setting of care and efficiency. The study enrolled 948 knee replacement patients and 618 hip replacement patients from 11 IRFs and 7 SNFs between February 2006 and February 2007. Output was measured by motor functional independence measure (FIM) score at discharge. Efficiency was measured in 3 ways: payment efficiency, LOS efficiency, and stochastic frontier analysis efficiency. IRF patients incurred higher expenditures per case but also achieved larger motor FIM gains in shorter LOS than did SNF patients. Setting of care was not a strong predictor of overall efficiency of rehabilitation care. Great variation in characteristics existed within IRFs or SNFs and severity groups. Medium-volume facilities among both SNFs and IRFs were most efficient. Early rehabilitation was consistently predictive of efficient treatment. The advantage of either setting is not clear-cut. Definition of efficiency depends in part on preference between cost and time. SNFs are more payment efficient; IRFs are more LOS efficient. Variation within SNFs and IRFs blurred setting differences; a simple comparison between SNF and IRF may not be appropriate.

Nano Surface Engineering in the 21st Century

Institute of Scientific and Technical Information of China (English)

Xu Bin-shi; Wang Hai-dou; Dong Shi-yun; Shi Pei-jing; Xu Yi

2004-01-01

Nano surface engineering is the new development of surface engineering, and is the typical representation that the advanced nano technology improves the traditional surface engineering. The connotation of nano surface engineering is profound. The initial stage of nano surface engineering is realized at present day. The key technologies of nano surface engineering are the support to the equipment remanufacturing. Today the relatively mature key technologies are: nano thermal spraying technology, nano electric-brush plating technology, nano self-repairing anti-friction technology and metal surface nanocrystallization, etc. Many scientific issues have been continuously discovered. Meanwhile they have been applied in the practice more and more, and have archived the excellent remanufacturing effect.

Money for Research, Not for Energy Bills: Finding Energy and Cost Savings in High Performance Computer Facility Designs

Energy Technology Data Exchange (ETDEWEB)

Drewmark Communications; Sartor, Dale; Wilson, Mark

2010-07-01

High-performance computing facilities in the United States consume an enormous amount of electricity, cutting into research budgets and challenging public- and private-sector efforts to reduce energy consumption and meet environmental goals. However, these facilities can greatly reduce their energy demand through energy-efficient design of the facility itself. Using a case study of a facility under design, this article discusses strategies and technologies that can be used to help achieve energy reductions.

Contents and Sample Arguments of a Safety Case for Near Surface Disposal of Radioactive Waste

International Nuclear Information System (INIS)

2017-06-01

This publication arises from the results of two projects to assist Member States in understanding and developing safety cases for near-surface radioactive waste disposal facilities. The objective of the publication is to give detailed information on the contents of safety cases for radioactive waste disposal and the types of arguments that may be included. It is written for technical experts preparing a safety case, and decision makers in the regulatory body and government. The publication outlines the key uses and aspects of the safety case, its evolution in parallel with that of the disposal facility, the key decision steps in the development of the waste disposal facility, the components of the safety case, their place in the Matrix of Arguments for a Safety Case (the MASC matrix), and a detailed description of the development of sample arguments that might be included in a safety case for each of two hypothetical radioactive waste disposal facilities.

Destruction of nuclear energy facilities in war: the problem and the implications

International Nuclear Information System (INIS)

Ramberg, B.

1980-01-01

This book examines current practices, policies, and regulations concerning nuclear energy in the light of potential sabotage. Dr. Ramberg explains clearly, for both the lay reader and the technical community, the vulnerabilities of different sorts of nuclear facilities. In a case-by-case analysis of countries using or building nuclear power plants, he outlines the strategic hazards of these facilities. The safety of thousands could depend on such volatile factors as the psychological sensitivity of national leaders and the direction of the wind. A combination of engineering changes, use of alternative forms of energy to limit nuclear proliferation, and changes in international law could lessen these risks. Finally, Dr. Ramberg suggests specific national and international guidelines for monitoring nuclear exports

Restructuring in response to case mix reimbursement in nursing homes: a contingency approach.

Science.gov (United States)

Zinn, Jacqueline; Feng, Zhanlian; Mor, Vincent; Intrator, Orna; Grabowski, David

2008-01-01

Resident-based case mix reimbursement has become the dominant mechanism for publicly funded nursing home care. In 1998 skilled nursing facility reimbursement changed from cost-based to case mix adjusted payments under the Medicare Prospective Payment System for the costs of all skilled nursing facility care provided to Medicare recipients. In addition, as of 2004, 35 state Medicaid programs had implemented some form of case mix reimbursement. The purpose of the study is to determine if the implementation of Medicare and Medicaid case mix reimbursement increased the administrative burden on nursing homes, as evidenced by increased levels of nurses in administrative functions. The primary data for this study come from the Centers for Medicare and Medicaid Services Online Survey Certification and Reporting database from 1997 through 2004, a national nursing home database containing aggregated facility-level information, including staffing, organizational characteristics and resident conditions, on all Medicare/Medicaid certified nursing facilities in the country. We conducted multivariate regression analyses using a facility fixed-effects model to examine the effects of the implementation of Medicaid case mix reimbursement and Medicare Prospective Payment System on changes in the level of total administrative nurse staffing in nursing homes. Both Medicaid case mix reimbursement and Medicare Prospective Payment System increased the level of administrative nurse staffing, on average by 5.5% and 4.0% respectively. However, lack of evidence for a substitution effect suggests that any decline in direct care staffing after the introduction of case mix reimbursement is not attributable to a shift from clinical nursing resources to administrative functions. Our findings indicate that the administrative burden posed by case mix reimbursement has resource implications for all freestanding facilities. At the margin, the increased administrative burden imposed by case mix may

Review of Regulatory Quality Assurance Requirements for the Operation of Nuclear R and D Facilities

International Nuclear Information System (INIS)

Kwon, Hyuk Il; Lim, Nam Jin

2005-01-01

Korea Atomic Energy Research Institute (KAERI) has many R and D facilities in operation, including HANARO research reactor, radioactive waste treatment facility (RWTF), post-irradiation examination facility (PIEF) and irradiated material test facility (IMEF). Recently, nation-wide interest is focused on the safety and security of major industrial facilities. Safe operation of nuclear facilities is imperative because of the consequence of public disaster by radiological release/ contamination, in case of an accident. Recently, Ministry of Science and Technology (MOST) of the Korean government announced amendments of Atomic Energy laws to enforce requirements of the physical protection and radiological emergency. In this paper, the context of amended Atomic Energy laws were reviewed to confirm quality assurance measures and identify additional QA activities, if any, that is required by the amendment

Argonne-West facility requirements for a radioactive waste treatment demonstration

International Nuclear Information System (INIS)

Dwight, C.C.; Felicione, F.S.; Black, D.B.; Kelso, R.B.; McClellan, G.C.

1995-01-01

At Argonne National Laboratory-West (ANL-W), near Idaho Falls, Idaho, facilities that were originally constructed to support the development of liquid-metal reactor technology are being used and/or modified to meet the environmental and waste management research needs of DOE. One example is the use of an Argonne-West facility to conduct a radioactive waste treatment demonstration through a cooperative project with Science Applications International Corporation (SAIC) and Lockheed Idaho Technologies Company. The Plasma Hearth Process (PBP) project will utilize commercially-adapted plasma arc technology to demonstrate treatment of actual mixed waste. The demonstration on radioactive waste will be conducted at Argonne's Transient Reactor Test Facility (TREAT). Utilization of an existing facility for a new and different application presents a unique set of issues in meeting applicable federal state, and local requirements as well as the additional constraints imposed by DOE Orders and ANL-W site requirements. This paper briefly describes the PHP radioactive demonstrations relevant to the interfaces with the TREAT facility. Safety, environmental design, and operational considerations pertinent to the PHP radioactive demonstration are specifically addressed herein. The personnel equipment, and facility interfaces associated with a radioactive waste treatment demonstration are an important aspect of the demonstration effort. Areas requiring significant effort in preparation for the PBP Project being conducted at the TREAT facility include confinement design, waste handling features, and sampling and analysis considerations. Information about the facility in which a radioactive demonstration will be conducted, specifically Argonne's TREAT facility in the case of PHP, may be of interest to other organizations involved in developing and demonstrating technologies for mixed waste treatment

Facility information system `SOINS-IIS`; Shisetsu joho kanri system `SOINS-IIS`

Energy Technology Data Exchange (ETDEWEB)

Shimaoka, S.; Watanabe, M.; Mizuno, Y. [Fuji Electric Co. Ltd., Tokyo (Japan)

1998-07-10

With the informatization in the industry, office space is becoming the center of business activities. Also as to the facility control, a facility control system is required which is added with functions of information service to users and the management support system, in addition to the conventional system used mainly for equipment maintenance. Fuji Electric Co. developed a facility information control system, SOINS-IIS (social information system-infrastructure information system), into which the above-mentioned functions were integrated. The features of the system were presented in examples of the introduction to Ichibankan, YRP (Yokosuka Research Park) Center and R and D Center, NTT DoCoMo. The system roughly has an information service function for facility users, function of management for office staff such as tenant management and bill management, management support function for facility owners and planning departments. Beside the above-mentioned functions, in case of YRP Center, for example, the system has functions of management of reservation of meeting rooms, etc., terminal display of common use information and terminal display of information, and many other management support functions. 10 figs.

Risk evaluation system for facility safeguards and security planning

International Nuclear Information System (INIS)

Udell, C.J.; Carlson, R.L.

1987-01-01

The Risk Evaluation System (RES) is an integrated approach to determining safeguards and security effectiveness and risk. RES combines the planning and technical analysis into a format that promotes an orderly development of protection strategies, planing assumptions, facility targets, vulnerability and risk determination, enhancement planning, and implementation. In addition, the RES computer database program enhances the capability of the analyst to perform a risk evaluation of the facility. The computer database is menu driven using data input screens and contains an algorithm for determining the probability of adversary defeat and risk. Also, base case and adjusted risk data records can be maintained and accessed easily

Direction of rational use of water at livestock facilities

Science.gov (United States)

Potseluev, A. A.; Nazarov, I. V.

2017-05-01

The article notes the world water shortage problem. Against this background, Russia’s agricultural production is considered, in particular the livestock sector as the main consumer of water resources. The structure of the main technological processes at livestock facilities is given and possible technological damage is indicated in case of the lack of technological processes for servicing animals and poultry with water. The direction of rational use of water based on the introduction of new technical and technological solutions of water supply systems and means is substantiated. Constructive solutions of systems and facilities that help to reduce water consumption are presented, and as well a possible positive effect.

Risk evaluation system for facility safeguards and security planning

International Nuclear Information System (INIS)

Udell, C.J.; Carlson, R.L.

1987-01-01

The Risk Evaluation System (RES) is an integrated approach to determining safeguards and security effectiveness and risk. RES combines the planning and technical analysis into a format that promotes an orderly development of protection strategies, planning assumptions, facility targets, vulnerability and risk determination, enhancement planning, and implementation. In addition, the RES computer database program enhances the capability of the analyst to perform a risk evaluation of the facility. The computer database is menu driven using data input screens and contains an algorithm for determining the probability of adversary defeat and risk. Also, base case and adjusted risk data records can be maintained and accessed easily

User Support of Electron Irradiation Facility

International Nuclear Information System (INIS)

Park, S. H.; Cha, H. K.; Lee, B. C.

2007-06-01

The KAERI (Korean Atomic Energy Research Institute) high-power electron beam irradiation facility, operating at the energies between 0.3 MeV and 10 MeV,has provided irradiation services to users in industries, universities, and institutes via 'Project of utilization and cooperation of users of a large research facility' since 2004. A great attraction of many researchers, almost 750 persons so far according to surveys, to e-beam irradiation technology as well as the growth of participants on Workshop on Electron Beam Applications from 121 to 176 indicate the increase of demands of irradiation service. Comparing to the cases of advanced nations in this area, such as America, Japan, China, and Russia, Korea is relatively much behind in radiation technology. It is mainly due to the lack of governmental supports and investments. Active support and investment on construction and operation of electron beam user facilities would be principal factors on developments of advanced technologies. In this project, we would like to satisfy users' requests by developing the effective managing and operating system for prompt services, processes, and QA and to ultimately assist users to create additional new results, by maximizing the utilization of all available resources and activating the developments of technologies of electron beam processing

Design Integration of Facilities Management

DEFF Research Database (Denmark)

Jensen, Per Anker

2009-01-01

One of the problems in the building industry is a limited degree of learning from experiences of use and operation of existing buildings. Development of professional facilities management (FM) can be seen as the missing link to bridge the gap between building operation and building design....... Strategies, methods and barriers for the transfer and integration of operational knowledge into the design process are discussed. Multiple strategies are needed to improve the integration of FM in design. Building clients must take on a leading role in defining and setting up requirements and procedures...... on literature studies and case studies from the Nordic countries in Europe, including research reflections on experiences from a main case study, where the author, before becoming a university researcher, was engaged in the client organization as deputy project director with responsibility for the integration...

A Game Theoretical Model for Location of Terror Response Facilities under Capacitated Resources

Directory of Open Access Journals (Sweden)

Lingpeng Meng

2013-01-01

Full Text Available This paper is concerned with the effect of capacity constraints on the locations of terror response facilities. We assume that the state has limited resources, and multiple facilities may be involved in the response until the demand is satisfied consequently. We formulate a leader-follower game model between the state and the terrorist and prove the existence and uniqueness of the Nash equilibrium. An integer linear programming is proposed to obtain the equilibrium results when the facility number is fixed. The problem is demonstrated by a case study of the 19 districts of Shanghai, China.

Shifting the burden or expanding access to care? Assessing malaria trends following scale-up of community health worker malaria case management and reactive case detection.

Science.gov (United States)

Larsen, David A; Winters, Anna; Cheelo, Sanford; Hamainza, Busiku; Kamuliwo, Mulakwa; Miller, John M; Bridges, Daniel J

2017-11-02

Malaria is a significant burden to health systems and is responsible for a large proportion of outpatient cases at health facilities in endemic regions. The scale-up of community management of malaria and reactive case detection likely affect both malaria cases and outpatient attendance at health facilities. Using health management information data from 2012 to 2013 this article examines health trends before and after the training of volunteer community health workers to test and treat malaria cases in Southern Province, Zambia. An estimated 50% increase in monthly reported malaria infections was found when community health workers were involved with malaria testing and treating in the community (incidence rate ratio 1.52, p malaria testing and treating in the community. These results suggest a large public health benefit to both community case management of malaria and reactive case detection. First, the capacity of the malaria surveillance system to identify malaria infections was increased by nearly one-third. Second, the outpatient attendance at health facilities was modestly decreased. Expanding the capacity of the malaria surveillance programme through systems such as community case management and reactive case detection is an important step toward malaria elimination.

Electromagnetic Fields Associated with Commercial Solar Photovoltaic Electric Power Generating Facilities.

Science.gov (United States)

Tell, R A; Hooper, H C; Sias, G G; Mezei, G; Hung, P; Kavet, R

2015-01-01

The southwest region of the United States is expected to experience an expansion of commercial solar photovoltaic generation facilities over the next 25 years. A solar facility converts direct current generated by the solar panels to three-phase 60-Hz power that is fed to the grid. This conversion involves sequential processing of the direct current through an inverter that produces low-voltage three-phase power, which is stepped up to distribution voltage (∼12 kV) through a transformer. This study characterized magnetic and electric fields between the frequencies of 0 Hz and 3 GHz at two facilities operated by the Southern California Edison Company in Porterville, CA and San Bernardino, CA. Static magnetic fields were very small compared to exposure limits established by IEEE and ICNIRP. The highest 60-Hz magnetic fields were measured adjacent to transformers and inverters, and radiofrequency fields from 5-100 kHz were associated with the inverters. The fields measured complied in every case with IEEE controlled and ICNIRP occupational exposure limits. In all cases, electric fields were negligible compared to IEEE and ICNIRP limits across the spectrum measured and when compared to the FCC limits (≥0.3 MHz).

Upgraded Features of Newly Constructed Fuel Assembly Mechanical Characterization Test Facility in KAERI

Energy Technology Data Exchange (ETDEWEB)

Lee, Kang Hee; Kang, Heung Seok; Yoon, Kyung Ho; Kim, Hyung Kyu; Lee, Young Ho; Kim, Soo Ho; Yang, Jae Ho [KAERI, Daejeon (Korea, Republic of)

2016-05-15

Fuel assembly mechanical characterization test facility (FAMeCT) in KAERI is newly constructed with upgraded functional features such as increased loading capacity, under-water vibration testing and severe earthquake simulation for extended fuel design guideline. The facility building is compactly designed in the scale of 3rd floor building and has regions for assembly-wise mechanical test equipment, dynamic load (seismic) simulating test system, small scale hydraulic loop and component wise test equipment. Figure 1 shows schematic regional layout of the facility building. Mechanical test platform and system is designed to increase loading capacity for axial compression test. Structural stability of the support system of new upper core plate simulator is validated through a limit case functional test. Fuel assembly mechanical characterization test facility in KAERI is newly constructed and upgraded with advanced functional features such as uprated loading capacity, under-water vibration testing and severe earthquake simulation for extended fuel design guideline. This paper briefly introduce the test facility construction and scope of the facility and is focused on the upgraded design features of the facility. Authors hope to facilitate the facility more in the future and collaborate with the industry.

Lessons learned from the Siting Process of an Interim Storage Facility in Spain - 12024

Energy Technology Data Exchange (ETDEWEB)

Lamolla, Meritxell Martell [MERIENCE Strategic Thinking, 08734 Olerdola, Barcelona (Spain)

2012-07-01

On 29 December 2009, the Spanish government launched a site selection process to host a centralised interim storage facility for spent fuel and high-level radioactive waste. It was an unprecedented call for voluntarism among Spanish municipalities to site a controversial facility. Two nuclear municipalities, amongst a total of thirteen municipalities from five different regions, presented their candidatures to host the facility in their territories. For two years the government did not make a decision. Only in November 30, 2011, the new government elected on 20 November 2011 officially selected a non-nuclear municipality, Villar de Canas, for hosting this facility. This paper focuses on analysing the factors facilitating and hindering the siting of controversial facilities, in particular the interim storage facility in Spain. It demonstrates that involving all stakeholders in the decision-making process should not be underestimated. In the case of Spain, all regional governments where there were candidate municipalities willing to host the centralised interim storage facility, publicly opposed to the siting of the facility. (author)

The CMS CERN Analysis Facility (CAF)

Energy Technology Data Exchange (ETDEWEB)

Buchmueller, O [Imperial College (United Kingdom); Bonacorsi, D [Universita and INFN, Bologna (Italy); Fanzago, F [Universita and INFN, Padova (Italy); Gowdy, S; Malgeri, L; Panzer-Steindel, B; Schwickerath, U; Spiga, D; Toebbicke, Rainer [Conseil Europeen Recherche Nucl. (CERN) Switzerland (Switzerland); Kreuzer, P [Rheinisch-Westfaelische Tech. Hoch. (RWTH) (Germany); Mankel, R [Deutsches Elektronen-Synchrotron (DESY) (Germany); Metson, S [University of Bristol (United Kingdom); Sanches, J Afonso; Teodoro, D, E-mail: Peter.Kreuzer@cern.c [Universidade do Estado do Rio De Janeiro (UERJ) (Brazil)

2010-04-01

The CMS CERN Analysis Facility (CAF) was primarily designed to host a large variety of latency-critical workflows. These break down into alignment and calibration, detector commissioning and diagnosis, and high-interest physics analysis requiring fast-turnaround. In addition to the low latency requirement on the batch farm, another mandatory condition is the efficient access to the RAW detector data stored at the CERN Tier-0 facility. The CMS CAF also foresees resources for interactive login by a large number of CMS collaborators located at CERN, as an entry point for their day-by-day analysis. These resources will run on a separate partition in order to protect the high-priority use-cases described above. While the CMS CAF represents only a modest fraction of the overall CMS resources on the WLCG GRID, an appropriately sized user-support service needs to be provided. We will describe the building, commissioning and operation of the CMS CAF during the year 2008. The facility was heavily and routinely used by almost 250 users during multiple commissioning and data challenge periods. It reached a CPU capacity of 1.4MSI2K and a disk capacity at the Peta byte scale. In particular, we will focus on the performances in terms of networking, disk access and job efficiency and extrapolate prospects for the upcoming LHC first year data taking. We will also present the experience gained and the limitations observed in operating such a large facility, in which well controlled workflows are combined with more chaotic type analysis by a large number of physicists.

The CMS CERN Analysis Facility (CAF)

International Nuclear Information System (INIS)

Buchmueller, O; Bonacorsi, D; Fanzago, F; Gowdy, S; Malgeri, L; Panzer-Steindel, B; Schwickerath, U; Spiga, D; Toebbicke, Rainer; Kreuzer, P; Mankel, R; Metson, S; Sanches, J Afonso; Teodoro, D

2010-01-01

The CMS CERN Analysis Facility (CAF) was primarily designed to host a large variety of latency-critical workflows. These break down into alignment and calibration, detector commissioning and diagnosis, and high-interest physics analysis requiring fast-turnaround. In addition to the low latency requirement on the batch farm, another mandatory condition is the efficient access to the RAW detector data stored at the CERN Tier-0 facility. The CMS CAF also foresees resources for interactive login by a large number of CMS collaborators located at CERN, as an entry point for their day-by-day analysis. These resources will run on a separate partition in order to protect the high-priority use-cases described above. While the CMS CAF represents only a modest fraction of the overall CMS resources on the WLCG GRID, an appropriately sized user-support service needs to be provided. We will describe the building, commissioning and operation of the CMS CAF during the year 2008. The facility was heavily and routinely used by almost 250 users during multiple commissioning and data challenge periods. It reached a CPU capacity of 1.4MSI2K and a disk capacity at the Peta byte scale. In particular, we will focus on the performances in terms of networking, disk access and job efficiency and extrapolate prospects for the upcoming LHC first year data taking. We will also present the experience gained and the limitations observed in operating such a large facility, in which well controlled workflows are combined with more chaotic type analysis by a large number of physicists.

Role of non-destructive examinations in leak testing of glove boxes for industrial scale plutonium handling at nuclear fuel fabrication facility along with case study

International Nuclear Information System (INIS)

Aher, Sachin

2015-01-01

Non Destructive Examinations has the prominent role at Nuclear Fuel Fabrication Facilities. Specifically NDE has contributed at utmost stratum in Leak Testing of Glove Boxes and qualifying them as a Class-I confinement for safe Plutonium handling at industrial scale. Advanced Fuel Fabrication Facility, BARC, Tarapur is engaged in fabrication of Plutonium based MOX (PuO 2 , DDUO 2 ) fuel with different enrichments for first core of PFBR reactor. Alpha- Leak Tight Glove Boxes along with HEPA Filters and dynamic ventilation form the promising engineering system for safe and reliable handling of plutonium bearing materials considering the radiotoxicity and risk associated with handling of plutonium. Leak Testing of Glove Boxes which involves the leak detection, leak rectification and leak quantifications is major challenging task. To accomplish this challenge, various Non Destructive Testing methods have assisted in promising way to achieve the stringent leak rate criterion for commissioning of Glove Box facilities for plutonium handling. This paper highlights the Role of various NDE techniques like Soap Solution Test, Argon Sniffer Test, Pressure Drop/Rise Test etc. in Glove Box Leak Testing along with procedure and methodology for effective rectification of leakage points. A Flow Chart consisting of Glove Box leak testing procedure starting from preliminary stage up to qualification stage along with a case study and observations are discussed in this paper. (author)

Criteria, standards and policies regarding decommissioning of nuclear facilities

International Nuclear Information System (INIS)

Detilleux, E.; Lennemann, W.L.

1977-01-01

At the end of this century, there will probably be around 2500 operating nuclear power reactors, along with all the other nuclear fuel cycle facilities supporting their operation. Eventually these facilities, one by one, will be shut down and it will be necessary to dispose of them as with any redundant industrial facility or plant. Some parts of a nuclear fuel cycle facility can be dismantled by conventional methods, but those parts which have become contaminated with radioactive nuclear products or induced radioactivity must be subject to rigid controls and restrictions and handled by special dismantling and disposal procedures. In many cases, the resulting quantity of radioactive waste is likely to be relatively large and dismantling quite costly. Decommissioning nuclear facilities is a multifaceted problem involving planners, design engineers, operators, waste managers and regulatory authorities. Preparation for decommissioning should begin as early as site selection and plant design. The corner stone for the preparation of a decommissioning programme is the definition of its extent, meeting the requirements for public and environmental protection during the period that the radioactive material is of concern. The paper discusses the decontamination and decommissioning experience at the Eurochemic fuel reprocessing plant, the implications and the knowledge gained from this experience. It includes the results of technical reviews made by the Nuclear Energy Agency of OECD and the International Atomic Energy Agency regarding decommissioning nuclear facilities. The paper notes the special planning that should be arranged between those responsible for the nuclear facility and competent public authorities who should jointly make a realistic determination of the eventual disposition of the nuclear facility, even before it is built. Recommendations cover the responsibilities of nuclear plant entrepreneurs, designers, operators, and public and regulatory authorities

Biochemistry Facility

Data.gov (United States)

Federal Laboratory Consortium — The Biochemistry Facility provides expert services and consultation in biochemical enzyme assays and protein purification. The facility currently features 1) Liquid...

Facility effluent monitoring plan for the plutonium-uranium extraction facility

International Nuclear Information System (INIS)

Nickels, J.M.; Geiger, J.L.

1992-11-01

A facility effluent monitoring plan is required by the US Department of Energy in DOE Order 5400.1 for any operations that involve hazardous materials and radioactive substances that could impact employee or public safety or the environment. A facility effluent monitoring plan determination was performed during Calendar Year 1991 and the evaluation requires the need for a facility effluent monitoring plan. This document is prepared using the specific guidelines identified. in. A Guide for Preparing Hanford Site Facility Effluent Monitoring Plans, WHC-EP-0438. This facility effluent monitoring plan assesses effluent monitoring systems and evaluates whether they are adequate to ensure the public health and safety as specified in applicable federal, state, and local requirements

Jupiter Laser Facility