WorldWideScience

Sample records for reliable computing personal

  1. Rater reliability and concurrent validity of the Keyboard Personal Computer Style instrument (K-PeCS).

    Science.gov (United States)

    Baker, Nancy A; Cook, James R; Redfern, Mark S

    2009-01-01

    This paper describes the inter-rater and intra-rater reliability, and the concurrent validity of an observational instrument, the Keyboard Personal Computer Style instrument (K-PeCS), which assesses stereotypical postures and movements associated with computer keyboard use. Three trained raters independently rated the video clips of 45 computer keyboard users to ascertain inter-rater reliability, and then re-rated a sub-sample of 15 video clips to ascertain intra-rater reliability. Concurrent validity was assessed by comparing the ratings obtained using the K-PeCS to scores developed from a 3D motion analysis system. The overall K-PeCS had excellent reliability [inter-rater: intra-class correlation coefficients (ICC)=.90; intra-rater: ICC=.92]. Most individual items on the K-PeCS had from good to excellent reliability, although six items fell below ICC=.75. Those K-PeCS items that were assessed for concurrent validity compared favorably to the motion analysis data for all but two items. These results suggest that most items on the K-PeCS can be used to reliably document computer keyboarding style.

  2. Personal Computers.

    Science.gov (United States)

    Toong, Hoo-min D.; Gupta, Amar

    1982-01-01

    Describes the hardware, software, applications, and current proliferation of personal computers (microcomputers). Includes discussions of microprocessors, memory, output (including printers), application programs, the microcomputer industry, and major microcomputer manufacturers (Apple, Radio Shack, Commodore, and IBM). (JN)

  3. Reliable computer systems.

    Science.gov (United States)

    Wear, L L; Pinkert, J R

    1993-11-01

    In this article, we looked at some decisions that apply to the design of reliable computer systems. We began with a discussion of several terms such as testability, then described some systems that call for highly reliable hardware and software. The article concluded with a discussion of methods that can be used to achieve higher reliability in computer systems. Reliability and fault tolerance in computers probably will continue to grow in importance. As more and more systems are computerized, people will want assurances about the reliability of these systems, and their ability to work properly even when sub-systems fail.

  4. Reliability in the utility computing era: Towards reliable Fog computing

    DEFF Research Database (Denmark)

    Madsen, Henrik; Burtschy, Bernard; Albeanu, G.

    2013-01-01

    This paper considers current paradigms in computing and outlines the most important aspects concerning their reliability. The Fog computing paradigm as a non-trivial extension of the Cloud is considered and the reliability of the networks of smart devices are discussed. Combining the reliability...... requirements of grid and cloud paradigms with the reliability requirements of networks of sensor and actuators it follows that designing a reliable Fog computing platform is feasible....

  5. Piping stress analysis with personal computers

    International Nuclear Information System (INIS)

    Revesz, Z.

    1987-01-01

    The growing market of the personal computers is providing an increasing number of professionals with unprecedented and surprisingly inexpensive computing capacity, which if using with powerful software, can enhance immensely the engineers capabilities. This paper focuses on the possibilities which opened in piping stress analysis by the widespread distribution of personal computers, on the necessary changes in the software and on the limitations of using personal computers for engineering design and analysis. Reliability and quality assurance aspects of using personal computers for nuclear applications are also mentioned. The paper resumes with personal views of the author and experiences gained during interactive graphic piping software development for personal computers. (orig./GL)

  6. Selecting Personal Computers.

    Science.gov (United States)

    Djang, Philipp A.

    1993-01-01

    Describes a Multiple Criteria Decision Analysis Approach for the selection of personal computers that combines the capabilities of Analytic Hierarchy Process and Integer Goal Programing. An example of how decision makers can use this approach to determine what kind of personal computers and how many of each type to purchase is given. (nine…

  7. Reliable computation from contextual correlations

    Science.gov (United States)

    Oestereich, André L.; Galvão, Ernesto F.

    2017-12-01

    An operational approach to the study of computation based on correlations considers black boxes with one-bit inputs and outputs, controlled by a limited classical computer capable only of performing sums modulo-two. In this setting, it was shown that noncontextual correlations do not provide any extra computational power, while contextual correlations were found to be necessary for the deterministic evaluation of nonlinear Boolean functions. Here we investigate the requirements for reliable computation in this setting; that is, the evaluation of any Boolean function with success probability bounded away from 1 /2 . We show that bipartite CHSH quantum correlations suffice for reliable computation. We also prove that an arbitrarily small violation of a multipartite Greenberger-Horne-Zeilinger noncontextuality inequality also suffices for reliable computation.

  8. Computer scientist looks at reliability computations

    International Nuclear Information System (INIS)

    Rosenthal, A.

    1975-01-01

    Results from the theory of computational complexity are applied to reliability computations on fault trees and networks. A well known class of problems which almost certainly have no fast solution algorithms is presented. It is shown that even approximately computing the reliability of many systems is difficult enough to be in this class. In the face of this result, which indicates that for general systems the computation time will be exponential in the size of the system, decomposition techniques which can greatly reduce the effective size of a wide variety of realistic systems are explored

  9. Know Your Personal Computer

    Indian Academy of Sciences (India)

    easily developed. A device that does not plug ... them and this is what we will study in this article and the ones to follow. Personal computers .... General, Control Data, Texas Instruments and Cray Research attempted downsizing their popular ...

  10. Personalized Empathic Computing (PEC)

    NARCIS (Netherlands)

    van Beusekom, W.; van den Broek, Egon; van der Heijden, M.; Janssen, J.H.; Spaak, E.

    2006-01-01

    Until a decade ago, computers were only used by experts, for professional purposes solely. Nowadays, the personal computer (PC) is standard equipment in most western housekeepings and is used to gather information, play games, communicate, etc. In parallel, users' expectations increase and,

  11. CAD on personal computers

    International Nuclear Information System (INIS)

    Lee, Seong U; Cho, Cheol Ho; Ko, Il Du

    1990-02-01

    This book contains four studies of CAD on personal computers. The first thing is computer graphics in computer-aided design by Seong U Lee. The second thing is graphics primer and programming with Fortran by Seong U Lee. The third thing is application of Auto cad by Il Do Ko. The last thing is application of CAD in building construction design by Cheol Ho Cho.

  12. PERSONALITY AND COMPUTER ADDICTION

    Directory of Open Access Journals (Sweden)

    Grażyna Jurczyńska

    2010-12-01

    Full Text Available Background: The aim of this work is to prove the relation between the personality traits and computer addicting. The research was carried out from 2006 to 2008 among the students of High School of Information Technology in Katowice. Material and methods: Research methods: Scale of Emotional Intelligens at Work, Social Competences Questionnaire, State-Trait Anxiety Inventory – STAI, Kimberly S. Young Test, Questionnaire to Assess the Level of Crises of Values, Directivity Scale and a questionnaire of 23 questions prepared for the research purposes. Results: 12.70% of the examined population met the criteria for computer addiction. In the own view, 76.34% considered themselves addicted to this medium. Conclusions: Personality traits such as emotional intelligence at work, inclination to authoritative behaviors as well as the value system may have influence on the addicting to a computer. No such relation was proven with reference to self – efficacy and anxious personality.

  13. Know Your Personal Computer

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 1; Issue 11. Know Your Personal Computer 5. The CPU Base Instruction Set and Assembly Language Programming. Siddhartha Kumar Ghoshal ... Supercomputer Education and Research Centre, Indian Institute of Science, Bangalore 560 012, India ...

  14. Know Your Personal Computer

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 2; Issue 11. Know Your Personal Computer - You and Your PC. Siddhartha Kumar Ghoshal. Series Article Volume 2 Issue 11 November 1997 pp 14-22. Fulltext. Click here to view fulltext PDF. Permanent link:

  15. Know Your Personal Computer

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 2; Issue 9. Know Your Personal Computer High-Level Operating Systems. Siddhartha Kumar Ghoshal. Series Article Volume 2 Issue 9 September 1997 pp 11-17. Fulltext. Click here to view fulltext PDF. Permanent link:

  16. Modified personal interviews: resurrecting reliable personal interviews for admissions?

    Science.gov (United States)

    Hanson, Mark D; Kulasegaram, Kulamakan Mahan; Woods, Nicole N; Fechtig, Lindsey; Anderson, Geoff

    2012-10-01

    Traditional admissions personal interviews provide flexible faculty-student interactions but are plagued by low inter-interview reliability. Axelson and Kreiter (2009) retrospectively showed that multiple independent sampling (MIS) may improve reliability of personal interviews; thus, the authors incorporated MIS into the admissions process for medical students applying to the University of Toronto's Leadership Education and Development Program (LEAD). They examined the reliability and resource demands of this modified personal interview (MPI) format. In 2010-2011, LEAD candidates submitted written applications, which were used to screen for participation in the MPI process. Selected candidates completed four brief (10-12 minutes) independent MPIs each with a different interviewer. The authors blueprinted MPI questions to (i.e., aligned them with) leadership attributes, and interviewers assessed candidates' eligibility on a five-point Likert-type scale. The authors analyzed inter-interview reliability using the generalizability theory. Sixteen candidates submitted applications; 10 proceeded to the MPI stage. Reliability of the written application components was 0.75. The MPI process had overall inter-interview reliability of 0.79. Correlation between the written application and MPI scores was 0.49. A decision study showed acceptable reliability of 0.74 with only three MPIs scored using one global rating. Furthermore, a traditional admissions interview format would take 66% more time than the MPI format. The MPI format, used during the LEAD admissions process, achieved high reliability with minimal faculty resources. The MPI format's reliability and effective resource use were possible through MIS and employment of expert interviewers. MPIs may be useful for other admissions tasks.

  17. Reliability and Availability of Cloud Computing

    CERN Document Server

    Bauer, Eric

    2012-01-01

    A holistic approach to service reliability and availability of cloud computing Reliability and Availability of Cloud Computing provides IS/IT system and solution architects, developers, and engineers with the knowledge needed to assess the impact of virtualization and cloud computing on service reliability and availability. It reveals how to select the most appropriate design for reliability diligence to assure that user expectations are met. Organized in three parts (basics, risk analysis, and recommendations), this resource is accessible to readers of diverse backgrounds and experience le

  18. Know Your Personal Computer

    Indian Academy of Sciences (India)

    computer with IBM PC .... read by a human and not translated by a compiler are called .... by different stages of education becomes a computer scientist. ... ancestors knew and carried out the semantic actions without question or comment.

  19. Know Your Personal Computer Introduction to Computers

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 1; Issue 1. Know Your Personal Computer Introduction to Computers. Siddhartha Kumar Ghoshal. Series Article Volume 1 Issue 1 January 1996 pp 48-55. Fulltext. Click here to view fulltext PDF. Permanent link:

  20. Reliable computer systems design and evaluatuion

    CERN Document Server

    Siewiorek, Daniel

    2014-01-01

    Enhance your hardware/software reliabilityEnhancement of system reliability has been a major concern of computer users and designers ¦ and this major revision of the 1982 classic meets users' continuing need for practical information on this pressing topic. Included are case studies of reliablesystems from manufacturers such as Tandem, Stratus, IBM, and Digital, as well as coverage of special systems such as the Galileo Orbiter fault protection system and AT&T telephone switching processors.

  1. Reliability and validity of a dual-probe personal computer-based muscle viewer for measuring the pennation angle of the medial gastrocnemius muscle in patients who have had a stroke.

    Science.gov (United States)

    Cho, Ji-Eun; Cho, Ki Hun; Yoo, Jun Sang; Lee, Su Jin; Lee, Wan-Hee

    2018-01-01

    Background A dual-probe personal computer-based muscle viewer (DPC-BMW) is advantageous in that it is relatively lightweight and easy to apply. Objective To investigate the reliability and validity of the DPC-BMW in comparison with those of a portable ultrasonography (P-US) device for measuring the pennation angle of the medial gastrocnemius (MG) muscle at rest and during contraction. Methods Twenty-four patients who had a stroke (18 men and 6 women) participated in this study. Using the DPC-BMW and P-US device, the pennation angle of the MG muscle on the affected side was randomly measured. Two examiners randomly obtained the images of all the participants in two separate test sessions, 7 days apart. Intraclass correlation coefficient (ICC), confidence interval, standard error of measurement, Bland-Altman plot, and Pearson correlation coefficient were used to estimate their reliability and validity. Results The ICC for the intrarater reliability of the MG muscle pennation angle measured using the DPC-BMW was > 0.916, indicating excellent reliability, and that for the interrater reliability ranged from 0.964 to 0.994. The P-US device also exhibited good reliability. A high correlation was found between the measurements of MG muscle pennation angle obtained using the DPC-BMW and that obtained using the P-US device (p < 0.01). Conclusion The DPC-BMW can provide clear images for accurate measurements, including measurements using dual probes. It has the advantage of rehabilitative US imaging for individuals who have had a stroke. More research studies are needed to evaluate the usefulness of the DPC-BMW in rehabilitation.

  2. Personal computers in accelerator control

    International Nuclear Information System (INIS)

    Anderssen, P.S.

    1988-01-01

    The advent of the personal computer has created a popular movement which has also made a strong impact on science and engineering. Flexible software environments combined with good computational performance and large storage capacities are becoming available at steadily decreasing costs. Of equal importance, however, is the quality of the user interface offered on many of these products. Graphics and screen interaction is available in ways that were only possible on specialized systems before. Accelerator engineers were quick to pick up the new technology. The first applications were probably for controllers and data gatherers for beam measurement equipment. Others followed, and today it is conceivable to make personal computer a standard component of an accelerator control system. This paper reviews the experience gained at CERN so far and describes the approach taken in the design of the common control center for the SPS and the future LEP accelerators. The design goal has been to be able to integrate personal computers into the accelerator control system and to build the operator's workplace around it. (orig.)

  3. RI management by personal computer

    International Nuclear Information System (INIS)

    Ono, Isamu; Hiyoshi, Katsunori; Ono, Kazuhiko; Morimitsu, Wataru

    1983-01-01

    For RI-handling facilities up to medium scale, it has been studied whether a personal computer is applicable to the practical management of radioisotopes. In the present system, the number of writing in mini floppy disks is 1280 articles per diskette, which is the sufficient capacity for a storage medium for one year in variety of books. The correction of radioactivity decay as well as various totalizations can be made easily, so that the state of RI storage and use for the whole RI-handling facility can be grasped. Further, by the improvement of the output formats, the transfer to the books as obligated to write is possible. From the above reason, a personal computer is practically applicable with the management system and also leads to labor saving in RI management personnel. (Mori, K.)

  4. Towards higher reliability of CMS computing facilities

    International Nuclear Information System (INIS)

    Bagliesi, G; Bloom, K; Brew, C; Flix, J; Kreuzer, P; Sciabà, A

    2012-01-01

    The CMS experiment has adopted a computing system where resources are distributed worldwide in more than 50 sites. The operation of the system requires a stable and reliable behaviour of the underlying infrastructure. CMS has established procedures to extensively test all relevant aspects of a site and their capability to sustain the various CMS computing workflows at the required scale. The Site Readiness monitoring infrastructure has been instrumental in understanding how the system as a whole was improving towards LHC operations, measuring the reliability of sites when running CMS activities, and providing sites with the information they need to troubleshoot any problem. This contribution reviews the complete automation of the Site Readiness program, with the description of monitoring tools and their inclusion into the Site Status Board (SSB), the performance checks, the use of tools like HammerCloud, and the impact in improving the overall reliability of the Grid from the point of view of the CMS computing system. These results are used by CMS to select good sites to conduct workflows, in order to maximize workflows efficiencies. The performance against these tests seen at the sites during the first years of LHC running is as well reviewed.

  5. Personal computer local networks report

    CERN Document Server

    1991-01-01

    Please note this is a Short Discount publication. Since the first microcomputer local networks of the late 1970's and early 80's, personal computer LANs have expanded in popularity, especially since the introduction of IBMs first PC in 1981. The late 1980s has seen a maturing in the industry with only a few vendors maintaining a large share of the market. This report is intended to give the reader a thorough understanding of the technology used to build these systems ... from cable to chips ... to ... protocols to servers. The report also fully defines PC LANs and the marketplace, with in-

  6. Reliability and Concurrent Validity of the International Personality ...

    African Journals Online (AJOL)

    Reliability and Concurrent Validity of the International Personality item Pool (IPIP) Big-five Factor Markers in Nigeria. ... Nigerian Journal of Psychiatry ... Aims: The aim of this study was to assess the internal consistency and concurrent validity ...

  7. Regulatory and personality predictors of the reliability of professional actions

    Directory of Open Access Journals (Sweden)

    Morosanova V.I.

    2017-12-01

    Full Text Available Background. The present research is carried out in the context of the conscious self-regulation of professional activity. Objective. It investigates the regulatory and personality predictors of reliability in rescue operations under stressful conditions. Design. The research sample includes 87 rescuers (72 men and 15 women aged from 25 to 50 years. Respondents were asked to complete the Morosanova’s Self-Regulation Profile Questionnaire – SRPQM, the Eysenck Personality Profile - Short (EPP-S, and the expert questionnaire “Professional Reliability of Rescue Operation” designed for this particular study. Results. On the basis of a correlation analysis, the structural model of the predictors of action reliability was constructed using the maximum likelihood method. Consistency indices showed a good agreement between the model and empirical data. The model contains three latent factors: “Self-regulation”, “Neuroticism” and “Reliability of actions”. As the model displays, the “Self-regulation” factor is a significant predictor of professional action reliability. There are two indicator variables for the factor “Self-regulation”: the self-regulation reliability considered as its stability in the stressful situations, and the rescuers’ levels of development of professionally critical regulatory features - modeling of conditions significant for the achievement of goals and the programming of actions. The study results also show that personality dispositions (by Eysenck have only indirect influence on action reliability. As the structural model reveals, the conscious self-regulation is a mediator in the relationship of neuroticism traits and action reliability. Conclusion. The conscious self-regulation is a significant predictor of professional action reliability under stressful conditions. It is also the mediator of the effects of personality dispositions on the reliability of action.

  8. Control by personal computer and Interface 1

    International Nuclear Information System (INIS)

    Kim, Eung Mug; Park, Sun Ho

    1989-03-01

    This book consists of three chapters. The first chapter deals with basic knowledge of micro computer control which are computer system, micro computer system, control of the micro computer and control system for calculator. The second chapter describes Interface about basic knowledge such as 8255 parallel interface, 6821 parallel interface, parallel interface of personal computer, reading BCD code in parallel interface, IEEE-488 interface, RS-232C interface and transmit data in personal computer and a measuring instrument. The third chapter includes control experiment by micro computer, experiment by eight bit computer and control experiment by machine code and BASIC.

  9. Personal Computer Transport Analysis Program

    Science.gov (United States)

    DiStefano, Frank, III; Wobick, Craig; Chapman, Kirt; McCloud, Peter

    2012-01-01

    The Personal Computer Transport Analysis Program (PCTAP) is C++ software used for analysis of thermal fluid systems. The program predicts thermal fluid system and component transients. The output consists of temperatures, flow rates, pressures, delta pressures, tank quantities, and gas quantities in the air, along with air scrubbing component performance. PCTAP s solution process assumes that the tubes in the system are well insulated so that only the heat transfer between fluid and tube wall and between adjacent tubes is modeled. The system described in the model file is broken down into its individual components; i.e., tubes, cold plates, heat exchangers, etc. A solution vector is built from the components and a flow is then simulated with fluid being transferred from one component to the next. The solution vector of components in the model file is built at the initiation of the run. This solution vector is simply a list of components in the order of their inlet dependency on other components. The component parameters are updated in the order in which they appear in the list at every time step. Once the solution vectors have been determined, PCTAP cycles through the components in the solution vector, executing their outlet function for each time-step increment.

  10. Image processing with personal computer

    International Nuclear Information System (INIS)

    Hara, Hiroshi; Handa, Madoka; Watanabe, Yoshihiko

    1990-01-01

    The method of automating the judgement works using photographs in radiation nondestructive inspection with a simple type image processor on the market was examined. The software for defect extraction and making binary and the software for automatic judgement were made for trial, and by using the various photographs on which the judgement was already done as the object, the accuracy and the problematic points were tested. According to the state of the objects to be photographed and the condition of inspection, the accuracy of judgement from 100% to 45% was obtained. The criteria for judgement were in conformity with the collection of reference photographs made by Japan Cast Steel Association. In the non-destructive inspection by radiography, the number and size of the defect images in photographs are visually judged, the results are collated with the standard, and the quality is decided. Recently, the technology of image processing with personal computers advanced, therefore by utilizing this technology, the automation of the judgement of photographs was attempted to improve the accuracy, to increase the inspection efficiency and to realize labor saving. (K.I.)

  11. Estimating Between-Person and Within-Person Subscore Reliability with Profile Analysis.

    Science.gov (United States)

    Bulut, Okan; Davison, Mark L; Rodriguez, Michael C

    2017-01-01

    Subscores are of increasing interest in educational and psychological testing due to their diagnostic function for evaluating examinees' strengths and weaknesses within particular domains of knowledge. Previous studies about the utility of subscores have mostly focused on the overall reliability of individual subscores and ignored the fact that subscores should be distinct and have added value over the total score. This study introduces a profile reliability approach that partitions the overall subscore reliability into within-person and between-person subscore reliability. The estimation of between-person reliability and within-person reliability coefficients is demonstrated using subscores from number-correct scoring, unidimensional and multidimensional item response theory scoring, and augmented scoring approaches via a simulation study and a real data study. The effects of various testing conditions, such as subtest length, correlations among subscores, and the number of subtests, are examined. Results indicate that there is a substantial trade-off between within-person and between-person reliability of subscores. Profile reliability coefficients can be useful in determining the extent to which subscores provide distinct and reliable information under various testing conditions.

  12. Personal computers in high energy physics

    International Nuclear Information System (INIS)

    Quarrie, D.R.

    1987-01-01

    The role of personal computers within HEP is expanding as their capabilities increase and their cost decreases. Already they offer greater flexibility than many low-cost graphics terminals for a comparable cost and in addition they can significantly increase the productivity of physicists and programmers. This talk will discuss existing uses for personal computers and explore possible future directions for their integration into the overall computing environment. (orig.)

  13. IUE Data Analysis Software for Personal Computers

    Science.gov (United States)

    Thompson, R.; Caplinger, J.; Taylor, L.; Lawton , P.

    1996-01-01

    This report summarizes the work performed for the program titled, "IUE Data Analysis Software for Personal Computers" awarded under Astrophysics Data Program NRA 92-OSSA-15. The work performed was completed over a 2-year period starting in April 1994. As a result of the project, 450 IDL routines and eight database tables are now available for distribution for Power Macintosh computers and Personal Computers running Windows 3.1.

  14. Reliability and protection against failure in computer systems

    International Nuclear Information System (INIS)

    Daniels, B.K.

    1979-01-01

    Computers are being increasingly integrated into the control and safety systems of large and potentially hazardous industrial processes. This development introduces problems which are particular to computer systems and opens the way to new techniques of solving conventional reliability and availability problems. References to the developing fields of software reliability, human factors and software design are given, and these subjects are related, where possible, to the quantified assessment of reliability. Original material is presented in the areas of reliability growth and computer hardware failure data. The report draws on the experience of the National Centre of Systems Reliability in assessing the capability and reliability of computer systems both within the nuclear industry, and from the work carried out in other industries by the Systems Reliability Service. (author)

  15. Computer-aided reliability and risk assessment

    International Nuclear Information System (INIS)

    Leicht, R.; Wingender, H.J.

    1989-01-01

    Activities in the fields of reliability and risk analyses have led to the development of particular software tools which now are combined in the PC-based integrated CARARA system. The options available in this system cover a wide range of reliability-oriented tasks, like organizing raw failure data in the component/event data bank FDB, performing statistical analysis of those data with the program FDA, managing the resulting parameters in the reliability data bank RDB, and performing fault tree analysis with the fault tree code FTL or evaluating the risk of toxic or radioactive material release with the STAR code. (orig.)

  16. Planning is not sufficient - Reliable computers need good requirements specifications

    International Nuclear Information System (INIS)

    Matras, J.R.

    1992-01-01

    Computer system reliability is the assurance that a computer system will perform its functions when required to do so. To ensure such reliability, it is important to plan the activities needed for computer system development. These development activities, in turn, require a Computer Quality Assurance Plan (CQAP) that provides the following: a Configuration Management Plan, a Verification and Validation (V and V) Plan, documentation requirements, a defined life cycle, review requirements, and organizational responsibilities. These items are necessary for system reliability; ultimately, however, they are not enough. Development of a reliable system is dependent on the requirements specification. This paper discusses how to use existing industry standards to develop a CQAP. In particular, the paper emphasizes the importance of the requirements specification and of methods for establishing reliability goals. The paper also describes how the revision of ANSI/IEE-ANS-7-4.3.2, Application Criteria for Digital Computer Systems of Nuclear Power Generating Stations, has addressed these issues

  17. CADRIGS--computer aided design reliability interactive graphics system

    International Nuclear Information System (INIS)

    Kwik, R.J.; Polizzi, L.M.; Sticco, S.; Gerrard, P.B.; Yeater, M.L.; Hockenbury, R.W.; Phillips, M.A.

    1982-01-01

    An integrated reliability analysis program combining graphic representation of fault trees, automated data base loadings and reference, and automated construction of reliability code input files was developed. The functional specifications for CADRIGS, the computer aided design reliability interactive graphics system, are presented. Previously developed fault tree segments used in auxiliary feedwater system safety analysis were constructed on CADRIGS and, when combined, yielded results identical to those resulting from manual input to the same reliability codes

  18. Assessment of physical server reliability in multi cloud computing system

    Science.gov (United States)

    Kalyani, B. J. D.; Rao, Kolasani Ramchand H.

    2018-04-01

    Business organizations nowadays functioning with more than one cloud provider. By spreading cloud deployment across multiple service providers, it creates space for competitive prices that minimize the burden on enterprises spending budget. To assess the software reliability of multi cloud application layered software reliability assessment paradigm is considered with three levels of abstractions application layer, virtualization layer, and server layer. The reliability of each layer is assessed separately and is combined to get the reliability of multi-cloud computing application. In this paper, we focused on how to assess the reliability of server layer with required algorithms and explore the steps in the assessment of server reliability.

  19. The Relationship between Personality and Computer Deviance

    Science.gov (United States)

    Burns, Cardra E.

    2013-01-01

    Computer deviance by employees, defined as malicious and nonmalicious computer use behaviors, has contributed to billions of dollars of monetary and productivity losses for public and private sector organizations. The purpose of this correlational study was to examine the relationship between personality characteristics and employees' computer…

  20. Reliability of Computer Analysis of Electrocardiograms (ECG) of ...

    African Journals Online (AJOL)

    Background: Computer programmes have been introduced to electrocardiography (ECG) with most physicians in Africa depending on computer interpretation of ECG. This study was undertaken to evaluate the reliability of computer interpretation of the 12-Lead ECG in the Black race. Methodology: Using the SCHILLER ...

  1. Processing computed tomography images by using personal computer

    International Nuclear Information System (INIS)

    Seto, Kazuhiko; Fujishiro, Kazuo; Seki, Hirofumi; Yamamoto, Tetsuo.

    1994-01-01

    Processing of CT images was attempted by using a popular personal computer. The program for image-processing was made with C compiler. The original images, acquired with CT scanner (TCT-60A, Toshiba), were transferred to the computer by 8-inch flexible diskette. Many fundamental image-processing, such as displaying image to the monitor, calculating CT value and drawing the profile curve. The result showed that a popular personal computer had ability to process CT images. It seemed that 8-inch flexible diskette was still useful medium of transferring image data. (author)

  2. Chemical emission rates from personal computers

    DEFF Research Database (Denmark)

    Nakagawa, T.; Wargocki, Pawel; Tanabe, S.

    2003-01-01

    Chemical emission measurements from different brands of personal computers (PCs) were conducted in a 1 m3 glass chamber. Eight PCs were tested individually. Each consisted of the same brand of PC tower and one of the 4 different brands of PC monitors. Within each brand both cathode-ray tube (CRT...

  3. Building fast, reliable, and adaptive software for computational science

    International Nuclear Information System (INIS)

    Rendell, A P; Antony, J; Armstrong, W; Janes, P; Yang, R

    2008-01-01

    Building fast, reliable, and adaptive software is a constant challenge for computational science, especially given recent developments in computer architecture. This paper outlines some of our efforts to address these three issues in the context of computational chemistry. First, a simple linear performance that can be used to model and predict the performance of Hartree-Fock calculations is discussed. Second, the use of interval arithmetic to assess the numerical reliability of the sort of integrals used in electronic structure methods is presented. Third, use of dynamic code modification as part of a framework to support adaptive software is outlined

  4. Prediction of Software Reliability using Bio Inspired Soft Computing Techniques.

    Science.gov (United States)

    Diwaker, Chander; Tomar, Pradeep; Poonia, Ramesh C; Singh, Vijander

    2018-04-10

    A lot of models have been made for predicting software reliability. The reliability models are restricted to using particular types of methodologies and restricted number of parameters. There are a number of techniques and methodologies that may be used for reliability prediction. There is need to focus on parameters consideration while estimating reliability. The reliability of a system may increase or decreases depending on the selection of different parameters used. Thus there is need to identify factors that heavily affecting the reliability of the system. In present days, reusability is mostly used in the various area of research. Reusability is the basis of Component-Based System (CBS). The cost, time and human skill can be saved using Component-Based Software Engineering (CBSE) concepts. CBSE metrics may be used to assess those techniques which are more suitable for estimating system reliability. Soft computing is used for small as well as large-scale problems where it is difficult to find accurate results due to uncertainty or randomness. Several possibilities are available to apply soft computing techniques in medicine related problems. Clinical science of medicine using fuzzy-logic, neural network methodology significantly while basic science of medicine using neural-networks-genetic algorithm most frequently and preferably. There is unavoidable interest shown by medical scientists to use the various soft computing methodologies in genetics, physiology, radiology, cardiology and neurology discipline. CBSE boost users to reuse the past and existing software for making new products to provide quality with a saving of time, memory space, and money. This paper focused on assessment of commonly used soft computing technique like Genetic Algorithm (GA), Neural-Network (NN), Fuzzy Logic, Support Vector Machine (SVM), Ant Colony Optimization (ACO), Particle Swarm Optimization (PSO), and Artificial Bee Colony (ABC). This paper presents working of soft computing

  5. ASTEC: Controls analysis for personal computers

    Science.gov (United States)

    Downing, John P.; Bauer, Frank H.; Thorpe, Christopher J.

    1989-01-01

    The ASTEC (Analysis and Simulation Tools for Engineering Controls) software is under development at Goddard Space Flight Center (GSFC). The design goal is to provide a wide selection of controls analysis tools at the personal computer level, as well as the capability to upload compute-intensive jobs to a mainframe or supercomputer. The project is a follow-on to the INCA (INteractive Controls Analysis) program that has been developed at GSFC over the past five years. While ASTEC makes use of the algorithms and expertise developed for the INCA program, the user interface was redesigned to take advantage of the capabilities of the personal computer. The design philosophy and the current capabilities of the ASTEC software are described.

  6. Transforming creativity: Personalized manufacturing meets embodied computing

    Directory of Open Access Journals (Sweden)

    Alan B. Craig

    2012-06-01

    Full Text Available This paper discusses aspects of a collaborative investigation of embodied computing and personal manufacturing. We describe the NeuroMaker 1.0, an artwork that playfully implements the concept of “translating of the designer’s ideas into a product”. Visitors to the installation were invited to use their own EEG to fabricate personalized physical objects. While primarily intended to provoke thought about the process of creativity, we also demonstrated that, with the right team, radical new interfaces are well within the reach.

  7. High-reliability computing for the smarter planet

    International Nuclear Information System (INIS)

    Quinn, Heather M.; Graham, Paul; Manuzzato, Andrea; Dehon, Andre

    2010-01-01

    The geometric rate of improvement of transistor size and integrated circuit performance, known as Moore's Law, has been an engine of growth for our economy, enabling new products and services, creating new value and wealth, increasing safety, and removing menial tasks from our daily lives. Affordable, highly integrated components have enabled both life-saving technologies and rich entertainment applications. Anti-lock brakes, insulin monitors, and GPS-enabled emergency response systems save lives. Cell phones, internet appliances, virtual worlds, realistic video games, and mp3 players enrich our lives and connect us together. Over the past 40 years of silicon scaling, the increasing capabilities of inexpensive computation have transformed our society through automation and ubiquitous communications. In this paper, we will present the concept of the smarter planet, how reliability failures affect current systems, and methods that can be used to increase the reliable adoption of new automation in the future. We will illustrate these issues using a number of different electronic devices in a couple of different scenarios. Recently IBM has been presenting the idea of a 'smarter planet.' In smarter planet documents, IBM discusses increased computer automation of roadways, banking, healthcare, and infrastructure, as automation could create more efficient systems. A necessary component of the smarter planet concept is to ensure that these new systems have very high reliability. Even extremely rare reliability problems can easily escalate to problematic scenarios when implemented at very large scales. For life-critical systems, such as automobiles, infrastructure, medical implantables, and avionic systems, unmitigated failures could be dangerous. As more automation moves into these types of critical systems, reliability failures will need to be managed. As computer automation continues to increase in our society, the need for greater radiation reliability is necessary

  8. High-reliability computing for the smarter planet

    Energy Technology Data Exchange (ETDEWEB)

    Quinn, Heather M [Los Alamos National Laboratory; Graham, Paul [Los Alamos National Laboratory; Manuzzato, Andrea [UNIV OF PADOVA; Dehon, Andre [UNIV OF PENN; Carter, Nicholas [INTEL CORPORATION

    2010-01-01

    The geometric rate of improvement of transistor size and integrated circuit performance, known as Moore's Law, has been an engine of growth for our economy, enabling new products and services, creating new value and wealth, increasing safety, and removing menial tasks from our daily lives. Affordable, highly integrated components have enabled both life-saving technologies and rich entertainment applications. Anti-lock brakes, insulin monitors, and GPS-enabled emergency response systems save lives. Cell phones, internet appliances, virtual worlds, realistic video games, and mp3 players enrich our lives and connect us together. Over the past 40 years of silicon scaling, the increasing capabilities of inexpensive computation have transformed our society through automation and ubiquitous communications. In this paper, we will present the concept of the smarter planet, how reliability failures affect current systems, and methods that can be used to increase the reliable adoption of new automation in the future. We will illustrate these issues using a number of different electronic devices in a couple of different scenarios. Recently IBM has been presenting the idea of a 'smarter planet.' In smarter planet documents, IBM discusses increased computer automation of roadways, banking, healthcare, and infrastructure, as automation could create more efficient systems. A necessary component of the smarter planet concept is to ensure that these new systems have very high reliability. Even extremely rare reliability problems can easily escalate to problematic scenarios when implemented at very large scales. For life-critical systems, such as automobiles, infrastructure, medical implantables, and avionic systems, unmitigated failures could be dangerous. As more automation moves into these types of critical systems, reliability failures will need to be managed. As computer automation continues to increase in our society, the need for greater radiation reliability is

  9. Controlling Laboratory Processes From A Personal Computer

    Science.gov (United States)

    Will, H.; Mackin, M. A.

    1991-01-01

    Computer program provides natural-language process control from IBM PC or compatible computer. Sets up process-control system that either runs without operator or run by workers who have limited programming skills. Includes three smaller programs. Two of them, written in FORTRAN 77, record data and control research processes. Third program, written in Pascal, generates FORTRAN subroutines used by other two programs to identify user commands with device-driving routines written by user. Also includes set of input data allowing user to define user commands to be executed by computer. Requires personal computer operating under MS-DOS with suitable hardware interfaces to all controlled devices. Also requires FORTRAN 77 compiler and device drivers written by user.

  10. Automation of reliability evaluation procedures through CARE - The computer-aided reliability estimation program.

    Science.gov (United States)

    Mathur, F. P.

    1972-01-01

    Description of an on-line interactive computer program called CARE (Computer-Aided Reliability Estimation) which can model self-repair and fault-tolerant organizations and perform certain other functions. Essentially CARE consists of a repository of mathematical equations defining the various basic redundancy schemes. These equations, under program control, are then interrelated to generate the desired mathematical model to fit the architecture of the system under evaluation. The mathematical model is then supplied with ground instances of its variables and is then evaluated to generate values for the reliability-theoretic functions applied to the model.

  11. Personal computer based home automation system

    OpenAIRE

    Hellmuth, George F.

    1993-01-01

    The systems engineering process is applied in the development of the preliminary design of a home automation communication protocol. The objective of the communication protocol is to provide a means for a personal computer to communicate with adapted appliances in the home. A needs analysis is used to ascertain that a need exist for a home automation system. Numerous design alternatives are suggested and evaluated to determine the best possible protocol design. Coaxial cable...

  12. Personal noise dosimeters: Accuracy and reliability in varied settings

    Directory of Open Access Journals (Sweden)

    Sheri Lynn Cook-Cunningham

    2014-01-01

    Full Text Available This study investigated the accuracy, reliability, and characteristics of three brands of personal noise dosimeters (N = 7 units in both pink noise (PN environments and natural environments (NEs through the acquisition of decibel readings, Leq readings and noise doses. Acquisition periods included repeated PN conditions, choir room rehearsals and participant (N = 3 Leq and noise dosages procured during a day in the life of a music student. Among primary results: (a All dosimeters exhibited very strong positive correlations for PN measurements across all instruments; (b all dosimeters were within the recommended American National Standard Institute (ANSI SI.25-1991 standard of ±2 dB (A of a reference measurement; and (c all dosimeters were within the recommended ANSI SI.25-1991 standard of ±2 dB (A when compared with each other. Results were discussed in terms of using personal noise dosimeters within hearing conservation and research contexts and recommendations for future research. Personal noise dosimeters were studied within the contexts of PN environments and NEs (choral classroom and the day in the life of collegiate music students. This quantitative study was a non-experimental correlation design. Three brands of personal noise dosimeters (Cirrus doseBadge, Quest Edge Eg5 and Etymotic ER200D were tested in two environments, a PN setting and a natural setting. There were two conditions within each environment. In the PN environment condition one, each dosimeter was tested individually in comparison with two reference measuring devices (Ivie and Easera while PN was generated by a Whites Instrument PN Tube. In condition two, the PN procedures were replicated for longer periods while all dosimeters measured the sound levels simultaneously. In the NE condition one, all dosimeters were placed side by side on a music stand and recorded sound levels of choir rehearsals over a 7-h rehearsal period. In NE, condition two noise levels were measured

  13. Computer Activities for Persons With Dementia.

    Science.gov (United States)

    Tak, Sunghee H; Zhang, Hongmei; Patel, Hetal; Hong, Song Hee

    2015-06-01

    The study examined participant's experience and individual characteristics during a 7-week computer activity program for persons with dementia. The descriptive study with mixed methods design collected 612 observational logs of computer sessions from 27 study participants, including individual interviews before and after the program. Quantitative data analysis included descriptive statistics, correlational coefficients, t-test, and chi-square. Content analysis was used to analyze qualitative data. Each participant averaged 23 sessions and 591min for 7 weeks. Computer activities included slide shows with music, games, internet use, and emailing. On average, they had a high score of intensity in engagement per session. Women attended significantly more sessions than men. Higher education level was associated with a higher number of different activities used per session and more time spent on online games. Older participants felt more tired. Feeling tired was significantly correlated with a higher number of weeks with only one session attendance per week. More anticholinergic medications taken by participants were significantly associated with a higher percentage of sessions with disengagement. The findings were significant at p < .05. Qualitative content analysis indicated tailoring computer activities appropriate to individual's needs and functioning is critical. All participants needed technical assistance. A framework for tailoring computer activities may provide guidance on developing and maintaining treatment fidelity of tailored computer activity interventions among persons with dementia. Practice guidelines and education protocols may assist caregivers and service providers to integrate computer activities into homes and aging services settings. © The Author 2015. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  14. Highly reliable computer network for real time system

    International Nuclear Information System (INIS)

    Mohammed, F.A.; Omar, A.A.; Ayad, N.M.A.; Madkour, M.A.I.; Ibrahim, M.K.

    1988-01-01

    Many of computer networks have been studied different trends regarding the network architecture and the various protocols that govern data transfers and guarantee a reliable communication among all a hierarchical network structure has been proposed to provide a simple and inexpensive way for the realization of a reliable real-time computer network. In such architecture all computers in the same level are connected to a common serial channel through intelligent nodes that collectively control data transfers over the serial channel. This level of computer network can be considered as a local area computer network (LACN) that can be used in nuclear power plant control system since it has geographically dispersed subsystems. network expansion would be straight the common channel for each added computer (HOST). All the nodes are designed around a microprocessor chip to provide the required intelligence. The node can be divided into two sections namely a common section that interfaces with serial data channel and a private section to interface with the host computer. This part would naturally tend to have some variations in the hardware details to match the requirements of individual host computers. fig 7

  15. Comparison of reliability of lateral cephalogram and computed ...

    African Journals Online (AJOL)

    of malocclusion and airway space using lateral cephalogram and computed tomography (CT) and to compare its reliability. To obtain important information on the morphology of the soft palate on lateral cephalogram and to determine its etiopathogenesis in obstructive sleep apnea (OSA). Materials and Methods: Lateral ...

  16. Systems reliability analysis: applications of the SPARCS System-Reliability Assessment Computer Program

    International Nuclear Information System (INIS)

    Locks, M.O.

    1978-01-01

    SPARCS-2 (Simulation Program for Assessing the Reliabilities of Complex Systems, Version 2) is a PL/1 computer program for assessing (establishing interval estimates for) the reliability and the MTBF of a large and complex s-coherent system of any modular configuration. The system can consist of a complex logical assembly of independently failing attribute (binomial-Bernoulli) and time-to-failure (Poisson-exponential) components, without regard to their placement. Alternatively, it can be a configuration of independently failing modules, where each module has either or both attribute and time-to-failure components. SPARCS-2 also has an improved super modularity feature. Modules with minimal-cut unreliabiliy calculations can be mixed with those having minimal-path reliability calculations. All output has been standardized to system reliability or probability of success, regardless of the form in which the input data is presented, and whatever the configuration of modules or elements within modules

  17. Recent advances in computational structural reliability analysis methods

    Science.gov (United States)

    Thacker, Ben H.; Wu, Y.-T.; Millwater, Harry R.; Torng, Tony Y.; Riha, David S.

    1993-10-01

    The goal of structural reliability analysis is to determine the probability that the structure will adequately perform its intended function when operating under the given environmental conditions. Thus, the notion of reliability admits the possibility of failure. Given the fact that many different modes of failure are usually possible, achievement of this goal is a formidable task, especially for large, complex structural systems. The traditional (deterministic) design methodology attempts to assure reliability by the application of safety factors and conservative assumptions. However, the safety factor approach lacks a quantitative basis in that the level of reliability is never known and usually results in overly conservative designs because of compounding conservatisms. Furthermore, problem parameters that control the reliability are not identified, nor their importance evaluated. A summary of recent advances in computational structural reliability assessment is presented. A significant level of activity in the research and development community was seen recently, much of which was directed towards the prediction of failure probabilities for single mode failures. The focus is to present some early results and demonstrations of advanced reliability methods applied to structural system problems. This includes structures that can fail as a result of multiple component failures (e.g., a redundant truss), or structural components that may fail due to multiple interacting failure modes (e.g., excessive deflection, resonate vibration, or creep rupture). From these results, some observations and recommendations are made with regard to future research needs.

  18. A Research Roadmap for Computation-Based Human Reliability Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Boring, Ronald [Idaho National Lab. (INL), Idaho Falls, ID (United States); Mandelli, Diego [Idaho National Lab. (INL), Idaho Falls, ID (United States); Joe, Jeffrey [Idaho National Lab. (INL), Idaho Falls, ID (United States); Smith, Curtis [Idaho National Lab. (INL), Idaho Falls, ID (United States); Groth, Katrina [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-08-01

    The United States (U.S.) Department of Energy (DOE) is sponsoring research through the Light Water Reactor Sustainability (LWRS) program to extend the life of the currently operating fleet of commercial nuclear power plants. The Risk Informed Safety Margin Characterization (RISMC) research pathway within LWRS looks at ways to maintain and improve the safety margins of these plants. The RISMC pathway includes significant developments in the area of thermalhydraulics code modeling and the development of tools to facilitate dynamic probabilistic risk assessment (PRA). PRA is primarily concerned with the risk of hardware systems at the plant; yet, hardware reliability is often secondary in overall risk significance to human errors that can trigger or compound undesirable events at the plant. This report highlights ongoing efforts to develop a computation-based approach to human reliability analysis (HRA). This computation-based approach differs from existing static and dynamic HRA approaches in that it: (i) interfaces with a dynamic computation engine that includes a full scope plant model, and (ii) interfaces with a PRA software toolset. The computation-based HRA approach presented in this report is called the Human Unimodels for Nuclear Technology to Enhance Reliability (HUNTER) and incorporates in a hybrid fashion elements of existing HRA methods to interface with new computational tools developed under the RISMC pathway. The goal of this research effort is to model human performance more accurately than existing approaches, thereby minimizing modeling uncertainty found in current plant risk models.

  19. A Research Roadmap for Computation-Based Human Reliability Analysis

    International Nuclear Information System (INIS)

    Boring, Ronald; Mandelli, Diego; Joe, Jeffrey; Smith, Curtis; Groth, Katrina

    2015-01-01

    The United States (U.S.) Department of Energy (DOE) is sponsoring research through the Light Water Reactor Sustainability (LWRS) program to extend the life of the currently operating fleet of commercial nuclear power plants. The Risk Informed Safety Margin Characterization (RISMC) research pathway within LWRS looks at ways to maintain and improve the safety margins of these plants. The RISMC pathway includes significant developments in the area of thermalhydraulics code modeling and the development of tools to facilitate dynamic probabilistic risk assessment (PRA). PRA is primarily concerned with the risk of hardware systems at the plant; yet, hardware reliability is often secondary in overall risk significance to human errors that can trigger or compound undesirable events at the plant. This report highlights ongoing efforts to develop a computation-based approach to human reliability analysis (HRA). This computation-based approach differs from existing static and dynamic HRA approaches in that it: (i) interfaces with a dynamic computation engine that includes a full scope plant model, and (ii) interfaces with a PRA software toolset. The computation-based HRA approach presented in this report is called the Human Unimodels for Nuclear Technology to Enhance Reliability (HUNTER) and incorporates in a hybrid fashion elements of existing HRA methods to interface with new computational tools developed under the RISMC pathway. The goal of this research effort is to model human performance more accurately than existing approaches, thereby minimizing modeling uncertainty found in current plant risk models.

  20. Reliability analysis framework for computer-assisted medical decision systems

    International Nuclear Information System (INIS)

    Habas, Piotr A.; Zurada, Jacek M.; Elmaghraby, Adel S.; Tourassi, Georgia D.

    2007-01-01

    We present a technique that enhances computer-assisted decision (CAD) systems with the ability to assess the reliability of each individual decision they make. Reliability assessment is achieved by measuring the accuracy of a CAD system with known cases similar to the one in question. The proposed technique analyzes the feature space neighborhood of the query case to dynamically select an input-dependent set of known cases relevant to the query. This set is used to assess the local (query-specific) accuracy of the CAD system. The estimated local accuracy is utilized as a reliability measure of the CAD response to the query case. The underlying hypothesis of the study is that CAD decisions with higher reliability are more accurate. The above hypothesis was tested using a mammographic database of 1337 regions of interest (ROIs) with biopsy-proven ground truth (681 with masses, 656 with normal parenchyma). Three types of decision models, (i) a back-propagation neural network (BPNN), (ii) a generalized regression neural network (GRNN), and (iii) a support vector machine (SVM), were developed to detect masses based on eight morphological features automatically extracted from each ROI. The performance of all decision models was evaluated using the Receiver Operating Characteristic (ROC) analysis. The study showed that the proposed reliability measure is a strong predictor of the CAD system's case-specific accuracy. Specifically, the ROC area index for CAD predictions with high reliability was significantly better than for those with low reliability values. This result was consistent across all decision models investigated in the study. The proposed case-specific reliability analysis technique could be used to alert the CAD user when an opinion that is unlikely to be reliable is offered. The technique can be easily deployed in the clinical environment because it is applicable with a wide range of classifiers regardless of their structure and it requires neither additional

  1. Evaluation of Network Reliability for Computer Networks with Multiple Sources

    Directory of Open Access Journals (Sweden)

    Yi-Kuei Lin

    2012-01-01

    Full Text Available Evaluating the reliability of a network with multiple sources to multiple sinks is a critical issue from the perspective of quality management. Due to the unrealistic definition of paths of network models in previous literature, existing models are not appropriate for real-world computer networks such as the Taiwan Advanced Research and Education Network (TWAREN. This paper proposes a modified stochastic-flow network model to evaluate the network reliability of a practical computer network with multiple sources where data is transmitted through several light paths (LPs. Network reliability is defined as being the probability of delivering a specified amount of data from the sources to the sink. It is taken as a performance index to measure the service level of TWAREN. This paper studies the network reliability of the international portion of TWAREN from two sources (Taipei and Hsinchu to one sink (New York that goes through a submarine and land surface cable between Taiwan and the United States.

  2. Reliability analysis of Airbus A-330 computer flight management system

    OpenAIRE

    Fajmut, Metod

    2010-01-01

    Diploma thesis deals with digitized, computerized flight control system »Fly-by-wire« and security aspects of the computer system of an aircraft Airbus A330. As for space and military aircraft structures is also in commercial airplanes, much of the financial contribution devoted to reliability. Conventional aircraft control systems have, and some are still, to rely on mechanical and hydraulic connections between the controls on aircraft operated by the pilot and control surfaces. But newer a...

  3. Computer Model to Estimate Reliability Engineering for Air Conditioning Systems

    International Nuclear Information System (INIS)

    Afrah Al-Bossly, A.; El-Berry, A.; El-Berry, A.

    2012-01-01

    Reliability engineering is used to predict the performance and optimize design and maintenance of air conditioning systems. Air conditioning systems are expose to a number of failures. The failures of an air conditioner such as turn on, loss of air conditioner cooling capacity, reduced air conditioning output temperatures, loss of cool air supply and loss of air flow entirely can be due to a variety of problems with one or more components of an air conditioner or air conditioning system. Forecasting for system failure rates are very important for maintenance. This paper focused on the reliability of the air conditioning systems. Statistical distributions that were commonly applied in reliability settings: the standard (2 parameter) Weibull and Gamma distributions. After distributions parameters had been estimated, reliability estimations and predictions were used for evaluations. To evaluate good operating condition in a building, the reliability of the air conditioning system that supplies conditioned air to the several The company's departments. This air conditioning system is divided into two, namely the main chilled water system and the ten air handling systems that serves the ten departments. In a chilled-water system the air conditioner cools water down to 40-45 degree F (4-7 degree C). The chilled water is distributed throughout the building in a piping system and connected to air condition cooling units wherever needed. Data analysis has been done with support a computer aided reliability software, this is due to the Weibull and Gamma distributions indicated that the reliability for the systems equal to 86.012% and 77.7% respectively. A comparison between the two important families of distribution functions, namely, the Weibull and Gamma families was studied. It was found that Weibull method performed for decision making.

  4. MAPPS (Maintenance Personnel Performance Simulation): a computer simulation model for human reliability analysis

    International Nuclear Information System (INIS)

    Knee, H.E.; Haas, P.M.

    1985-01-01

    A computer model has been developed, sensitivity tested, and evaluated capable of generating reliable estimates of human performance measures in the nuclear power plant (NPP) maintenance context. The model, entitled MAPPS (Maintenance Personnel Performance Simulation), is of the simulation type and is task-oriented. It addresses a number of person-machine, person-environment, and person-person variables and is capable of providing the user with a rich spectrum of important performance measures including mean time for successful task performance by a maintenance team and maintenance team probability of task success. These two measures are particularly important for input to probabilistic risk assessment (PRA) studies which were the primary impetus for the development of MAPPS. The simulation nature of the model along with its generous input parameters and output variables allows its usefulness to extend beyond its input to PRA

  5. Algorithmic mechanisms for reliable crowdsourcing computation under collusion.

    Science.gov (United States)

    Fernández Anta, Antonio; Georgiou, Chryssis; Mosteiro, Miguel A; Pareja, Daniel

    2015-01-01

    We consider a computing system where a master processor assigns a task for execution to worker processors that may collude. We model the workers' decision of whether to comply (compute the task) or not (return a bogus result to save the computation cost) as a game among workers. That is, we assume that workers are rational in a game-theoretic sense. We identify analytically the parameter conditions for a unique Nash Equilibrium where the master obtains the correct result. We also evaluate experimentally mixed equilibria aiming to attain better reliability-profit trade-offs. For a wide range of parameter values that may be used in practice, our simulations show that, in fact, both master and workers are better off using a pure equilibrium where no worker cheats, even under collusion, and even for colluding behaviors that involve deviating from the game.

  6. Diagnostic reliability of MMPI-2 computer-based test interpretations.

    Science.gov (United States)

    Pant, Hina; McCabe, Brian J; Deskovitz, Mark A; Weed, Nathan C; Williams, John E

    2014-09-01

    Reflecting the common use of the MMPI-2 to provide diagnostic considerations, computer-based test interpretations (CBTIs) also typically offer diagnostic suggestions. However, these diagnostic suggestions can sometimes be shown to vary widely across different CBTI programs even for identical MMPI-2 profiles. The present study evaluated the diagnostic reliability of 6 commercially available CBTIs using a 20-item Q-sort task developed for this study. Four raters each sorted diagnostic classifications based on these 6 CBTI reports for 20 MMPI-2 profiles. Two questions were addressed. First, do users of CBTIs understand the diagnostic information contained within the reports similarly? Overall, diagnostic sorts of the CBTIs showed moderate inter-interpreter diagnostic reliability (mean r = .56), with sorts for the 1/2/3 profile showing the highest inter-interpreter diagnostic reliability (mean r = .67). Second, do different CBTIs programs vary with respect to diagnostic suggestions? It was found that diagnostic sorts of the CBTIs had a mean inter-CBTI diagnostic reliability of r = .56, indicating moderate but not strong agreement across CBTIs in terms of diagnostic suggestions. The strongest inter-CBTI diagnostic agreement was found for sorts of the 1/2/3 profile CBTIs (mean r = .71). Limitations and future directions are discussed. PsycINFO Database Record (c) 2014 APA, all rights reserved.

  7. Device controllers using an industrial personal computer of the PF 2.5-GeV Electron Linac at KEK

    International Nuclear Information System (INIS)

    Otake, Yuji; Yokota, Mitsuhiro; Kakihara, Kazuhisa; Ogawa, Yujiro; Ohsawa, Satoshi; Shidara, Tetsuo; Nakahara, Kazuo

    1992-01-01

    Device controllers for electron guns and slits using an industrial personal computer have been designed and installed in the Photon Factory 2.5-GeV Electron Linac at KEK. The design concept of the controllers is to realize a reliable system and good productivity of hardware and software by using an industrial personal computer and a programmable sequence controller. The device controllers have been working reliably for several years. (author)

  8. Reliability of an interactive computer program for advance care planning.

    Science.gov (United States)

    Schubart, Jane R; Levi, Benjamin H; Camacho, Fabian; Whitehead, Megan; Farace, Elana; Green, Michael J

    2012-06-01

    Despite widespread efforts to promote advance directives (ADs), completion rates remain low. Making Your Wishes Known: Planning Your Medical Future (MYWK) is an interactive computer program that guides individuals through the process of advance care planning, explaining health conditions and interventions that commonly involve life or death decisions, helps them articulate their values/goals, and translates users' preferences into a detailed AD document. The purpose of this study was to demonstrate that (in the absence of major life changes) the AD generated by MYWK reliably reflects an individual's values/preferences. English speakers ≥30 years old completed MYWK twice, 4 to 6 weeks apart. Reliability indices were assessed for three AD components: General Wishes; Specific Wishes for treatment; and Quality-of-Life values (QoL). Twenty-four participants completed the study. Both the Specific Wishes and QoL scales had high internal consistency in both time periods (Knuder Richardson formula 20 [KR-20]=0.83-0.95, and 0.86-0.89). Test-retest reliability was perfect for General Wishes (κ=1), high for QoL (Pearson's correlation coefficient=0.83), but lower for Specific Wishes (Pearson's correlation coefficient=0.57). MYWK generates an AD where General Wishes and QoL (but not Specific Wishes) statements remain consistent over time.

  9. Reliability of an Interactive Computer Program for Advance Care Planning

    Science.gov (United States)

    Levi, Benjamin H.; Camacho, Fabian; Whitehead, Megan; Farace, Elana; Green, Michael J

    2012-01-01

    Abstract Despite widespread efforts to promote advance directives (ADs), completion rates remain low. Making Your Wishes Known: Planning Your Medical Future (MYWK) is an interactive computer program that guides individuals through the process of advance care planning, explaining health conditions and interventions that commonly involve life or death decisions, helps them articulate their values/goals, and translates users' preferences into a detailed AD document. The purpose of this study was to demonstrate that (in the absence of major life changes) the AD generated by MYWK reliably reflects an individual's values/preferences. English speakers ≥30 years old completed MYWK twice, 4 to 6 weeks apart. Reliability indices were assessed for three AD components: General Wishes; Specific Wishes for treatment; and Quality-of-Life values (QoL). Twenty-four participants completed the study. Both the Specific Wishes and QoL scales had high internal consistency in both time periods (Knuder Richardson formula 20 [KR-20]=0.83–0.95, and 0.86–0.89). Test-retest reliability was perfect for General Wishes (κ=1), high for QoL (Pearson's correlation coefficient=0.83), but lower for Specific Wishes (Pearson's correlation coefficient=0.57). MYWK generates an AD where General Wishes and QoL (but not Specific Wishes) statements remain consistent over time. PMID:22512830

  10. The reliability of tablet computers in depicting maxillofacial radiographic landmarks

    Energy Technology Data Exchange (ETDEWEB)

    Tadinada, Aditya; Mahdian, Mina; Sheth, Sonam; Chandhoke, Taranpreet K.; Gopalakrishna, Aadarsh; Potluri, Anitha; Yadav, Sumit [University of Connecticut School of Dental Medicine, Farmington (United States)

    2015-09-15

    This study was performed to evaluate the reliability of the identification of anatomical landmarks in panoramic and lateral cephalometric radiographs on a standard medical grade picture archiving communication system (PACS) monitor and a tablet computer (iPad 5). A total of 1000 radiographs, including 500 panoramic and 500 lateral cephalometric radiographs, were retrieved from the de-identified dataset of the archive of the Section of Oral and Maxillofacial Radiology of the University Of Connecticut School Of Dental Medicine. Major radiographic anatomical landmarks were independently reviewed by two examiners on both displays. The examiners initially reviewed ten panoramic and ten lateral cephalometric radiographs using each imaging system, in order to verify interoperator agreement in landmark identification. The images were scored on a four-point scale reflecting the diagnostic image quality and exposure level of the images. Statistical analysis showed no significant difference between the two displays regarding the visibility and clarity of the landmarks in either the panoramic or cephalometric radiographs. Tablet computers can reliably show anatomical landmarks in panoramic and lateral cephalometric radiographs.

  11. Hepatic volumetry with PhotoShop in personal computer.

    Science.gov (United States)

    Lu, Yi; Wu, Zheng; Liu, Chang; Wang, Hao-Hua

    2004-02-01

    Convenient way to clarify liver volume or tumor volume in the liver is eagerly demanded by hepatobiliary surgeons, for so many aspects of clinical work need to know the liver volumetry. At present, some methods have been used to measure the liver volumetry, such as computed tomography (CT) scans, three-dimensional ultrasound volumetric system([1]) and 3-dimensional sonography([2,3]) et al. But enough volumetric information was failed to obtain by surgeons and a new way of measuring the liver volumetry that can be operated by themselves is exigent. Whereas we devise a new method of using PhotoShop in personal computer to measure the liver volumetry. A piece of whole CT film was transformed to a high quality digitized image by digital camera or scanner and then the digitized image was conducted as JPEG file into personal computer. The JPEG image file of CT film was opened by PhotoShop. Determining the edge of interested areas, and the data of pixel values of the interested areas divided by 1 cm2 pixel value will produce the actual area with the unit of square centimeter. If section thickness of CT scan is 1 cm, the sum of the areas of the liver or tumor in all sections naturally is the volume of the liver or tumor. Comparison of 10 hepatic volumes gained by this method and those gained by the GE Prospeed CT set showed a good relativity between the two groups. The volumes of three right lobes were calculated by this method before lobectomy and their real volumes were obtained postoperatively by a volumenometer. Their variation was limited to 5%. Hepatic volume obtained by PhotoShop is reliable. This method can be used to measure hepatic volume perfectly to meet clinical demand, and many parameters such as liver resection rate, graft volume can be achieved. The disadvantage of this method is the step of copying the pixel value from PhotoShop to Microsoft Excel.

  12. Dynamic leaching test of personal computer components.

    Science.gov (United States)

    Li, Yadong; Richardson, Jay B; Niu, Xiaojun; Jackson, Ollie J; Laster, Jeremy D; Walker, Aaron K

    2009-11-15

    A dynamic leaching test (DLT) was developed and used to evaluate the leaching of toxic substances for electronic waste in the environment. The major components in personal computers (PCs) including motherboards, hard disc drives, floppy disc drives, and compact disc drives were tested. The tests lasted for 2 years for motherboards and 1.5 year for the disc drives. The extraction fluids for the standard toxicity characteristic leaching procedure (TCLP) and synthetic precipitation leaching procedure (SPLP) were used as the DLT leaching solutions. A total of 18 elements including Ag, Al, As, Au, Ba, Be, Cd, Cr, Cu, Fe, Ga, Ni, Pd, Pb, Sb, Se, Sn, and Zn were analyzed in the DLT leachates. Only Al, Cu, Fe, Ni, Pb, and Zn were commonly found in the DLT leachates of the PC components. Their leaching levels were much higher in TCLP extraction fluid than in SPLP extraction fluid. The toxic heavy metal Pb was found to continuously leach out of the components over the entire test periods. The cumulative amounts of Pb leached out of the motherboards in TCLP extraction fluid reached 2.0 g per motherboard over the 2-year test period, and that in SPLP extraction fluid were 75-90% less. The leaching rates or levels of Pb were largely affected by the content of galvanized steel in the PC components. The higher was the steel content, the lower the Pb leaching rate would be. The findings suggest that the obsolete PCs disposed of in landfills or discarded in the environment continuously release Pb for years when subjected to landfill leachate or rains.

  13. Systems for neutronic, thermohydraulic and shielding calculation in personal computers

    International Nuclear Information System (INIS)

    Villarino, E.A.; Abbate, P.; Lovotti, O.; Santini, M.

    1990-01-01

    The MTR-PC (Materials Testing Reactors-Personal Computers) system has been developed by the Nuclear Engineering Division of INVAP S.E. with the aim of providing working conditions integrated with personal computers for design and neutronic, thermohydraulic and shielding analysis for reactors employing plate type fuel. (Author) [es

  14. The algebraic manipulation program DIRAC on IBM personal computers

    International Nuclear Information System (INIS)

    Grozin, A.G.; Perlt, H.

    1989-01-01

    The version DIRAC (2.2) for IBM compatible personal computers is described. It is designed to manipulate algebraically with polynomials and tensors. After a short introduction concerning implementation and usage on personal computers an example program is given. It contains a detailed user's guide to DIRAC (2.2) and, additionally some useful applications. 4 refs

  15. Reliability and Validity of Five Mental Health Scales in Older Persons.

    Science.gov (United States)

    Himmelfarb, Samuel; Murrell, Stanley A.

    1983-01-01

    Assessed five scales as mental health measures for older persons (N=318). The internal consistency reliabilities for the anxiety, depression, and well-being scales were moderately high to high, but the reliabilities for the affect balance scale suggest some caution. Cutting points for the well-being and depression scales are suggested. (Author/JAC)

  16. SHM reliability and implementation - A personal military aviation perspective

    Science.gov (United States)

    Lindgren, Eric A.

    2016-02-01

    Structural Health Monitoring has been proposed as a solution to address the needs of military aviation to reduce the time and cost to perform nondestructive inspections. While the potential to realize significant benefits exist, there are considerations that have to be addressed before such systems can be integrated into military platforms. Some considerations are pervasive to all aviation, such as how to assess the reliability and reproducible capability of these systems. However, there are other challenges unique to military aviation that must be overcome before these types of systems can be used. This presentation and paper are intended as a complement to the review of the outcome of the SAE G-11 SHM committee special workshop on SHM reliability in April of 2015. It will address challenges unique to military aviation that stem from different approaches to managing structural integrity (i.e. safety), frequency of use, design differences, various maintenance practices, and additional descriptions addressing differences in the execution of inspections. The objective of this presentation is to improve the awareness of the research and development community to the different and unique requirements found in military aviation, including the differences between countries, services, and aircraft type. This information should assist the research and development community in identifying and attacking key challenges. It is not intended to be comprehensive overview of all stakeholders' perspectives, but to serve as a launch point for additional discussion and exploration of opportunities to realize the potential of Structural Health Monitoring to assist in the management of military aviation assets. The views expressed in this publication are those of the author and do not reflect the official policy or position of the United States Air Force, Department of Defense, or the United States Government.

  17. The use of personal computers in reactor physics

    International Nuclear Information System (INIS)

    Cullen, D.E.

    1988-01-01

    This paper points out that personal computers are now powerful enough (in terms of core size and speed) to allow them to be used for serious reactor physics applications. In addition the low cost of personal computers means that even small institutes can now have access to a significant amount of computer power. At the present time distribution centers, such as RSIC, are beginning to distribute reactor physics codes for use on personal computers; hopefully in the near future more and more of these codes will become available through distribution centers, such as RSIC

  18. Sensitivity Analysis of Personal Exposure Assessment Using a Computer Simulated Person

    DEFF Research Database (Denmark)

    Brohus, Henrik; Jensen, H. K.

    2009-01-01

    The paper considers uncertainties related to personal exposure assessment using a computer simulated person. CFD is used to simulate a uniform flow field around a human being to determine the personal exposure to a contaminant source. For various vertical locations of a point contaminant source...... three additional factors are varied, namely the velocity, details of the computer simulated person, and the CFD model of the wind channel. The personal exposure is found to be highly dependent on the relative source location. Variation in the range of two orders of magnitude is found. The exposure...

  19. Impact on participation and autonomy: test of validity and reliability for older persons

    Directory of Open Access Journals (Sweden)

    Isabelle Ottenvall Hammar

    2014-10-01

    Full Text Available In research and healthcare it is important to measure older persons’ self-determination in order to improve their possibilities to decide for themselves in daily life. The questionnaire Impact on Participation and Autonomy (IPA assesses self-determination, but is not constructed for older persons. The aim of this study was to examine the validity and reliability of the IPA-S questionnaire for persons aged 70 years and older. The study was performed in two steps; first a validity test of the Swedish version of the questionnaire, IPA-S, followed by a reliability test-retest of an adjusted version. The validity was tested with focus groups and individual interviews on persons aged 77-88 years, and the reliability on persons aged 70-99 years. The validity test result showed that IPA-S is valid for older persons but it was too extensive and the phrasing of the items needed adjustments. The reliability test-retest on the adjusted questionnaire, IPA-Older persons (IPA-O, showed that 15 of 22 items had high agreement. IPA-O can be used to measure older persons’ self-determination in their care and rehabilitation.

  20. Computers and Communications. Improving the Employability of Persons with Handicaps.

    Science.gov (United States)

    Deitel, Harvey M.

    1984-01-01

    Reviews applications of computer and communications technologies for persons with visual, hearing, physical, speech, and language impairments, as well as the effects of technologies on transportation, work at home, education, and other aspects affecting the employment of the disabled. (SK)

  1. Application of ubiquitous computing in personal health monitoring systems.

    Science.gov (United States)

    Kunze, C; Grossmann, U; Stork, W; Müller-Glaser, K D

    2002-01-01

    A possibility to significantly reduce the costs of public health systems is to increasingly use information technology. The Laboratory for Information Processing Technology (ITIV) at the University of Karlsruhe is developing a personal health monitoring system, which should improve health care and at the same time reduce costs by combining micro-technological smart sensors with personalized, mobile computing systems. In this paper we present how ubiquitous computing theory can be applied in the health-care domain.

  2. The reliable solution and computation time of variable parameters Logistic model

    OpenAIRE

    Pengfei, Wang; Xinnong, Pan

    2016-01-01

    The reliable computation time (RCT, marked as Tc) when applying a double precision computation of a variable parameters logistic map (VPLM) is studied. First, using the method proposed, the reliable solutions for the logistic map are obtained. Second, for a time-dependent non-stationary parameters VPLM, 10000 samples of reliable experiments are constructed, and the mean Tc is then computed. The results indicate that for each different initial value, the Tcs of the VPLM are generally different...

  3. Verification criteria on the reliability of personal dosimetric services from x and gamma radiations

    International Nuclear Information System (INIS)

    Borasi, G.; Benco, A.; Kaftal, S.

    1990-07-01

    The paper presents the methods used by Working Group ENEA-EDP (Experts in Personal Dosimetry) to control the reliability of the Dosimetric Services operating in Italy and asking for the above controls on voluntary basis. Testing and irradiation test methods are explained as well as the evaluation criteria. The paper includes suggestions and guide-lines to gain the status of 'Reliable Service'. Technical equipment and operating procedures needed to pass the test are also illustrated. (author)

  4. PCACE-Personal-Computer-Aided Cabling Engineering

    Science.gov (United States)

    Billitti, Joseph W.

    1987-01-01

    PCACE computer program developed to provide inexpensive, interactive system for learning and using engineering approach to interconnection systems. Basically database system that stores information as files of individual connectors and handles wiring information in circuit groups stored as records. Directly emulates typical manual engineering methods of handling data, thus making interface between user and program very natural. Apple version written in P-Code Pascal and IBM PC version of PCACE written in TURBO Pascal 3.0

  5. Poisson/Superfish codes for personal computers

    International Nuclear Information System (INIS)

    Humphries, S.

    1992-01-01

    The Poisson/Superfish codes calculate static E or B fields in two-dimensions and electromagnetic fields in resonant structures. New versions for 386/486 PCs and Macintosh computers have capabilities that exceed the mainframe versions. Notable improvements are interactive graphical post-processors, improved field calculation routines, and a new program for charged particle orbit tracking. (author). 4 refs., 1 tab., figs

  6. Internal Consistency, Retest Reliability, and their Implications For Personality Scale Validity

    Science.gov (United States)

    McCrae, Robert R.; Kurtz, John E.; Yamagata, Shinji; Terracciano, Antonio

    2010-01-01

    We examined data (N = 34,108) on the differential reliability and validity of facet scales from the NEO Inventories. We evaluated the extent to which (a) psychometric properties of facet scales are generalizable across ages, cultures, and methods of measurement; and (b) validity criteria are associated with different forms of reliability. Composite estimates of facet scale stability, heritability, and cross-observer validity were broadly generalizable. Two estimates of retest reliability were independent predictors of the three validity criteria; none of three estimates of internal consistency was. Available evidence suggests the same pattern of results for other personality inventories. Internal consistency of scales can be useful as a check on data quality, but appears to be of limited utility for evaluating the potential validity of developed scales, and it should not be used as a substitute for retest reliability. Further research on the nature and determinants of retest reliability is needed. PMID:20435807

  7. XCOM: Photon cross sections on a personal computer

    International Nuclear Information System (INIS)

    Berger, M.J.; Hubbell, J.H.

    1987-07-01

    A computer program and data base are presented which can be used to calculate, with a personal computer, photon cross sections for scattering, photoelectric absorption and pair production, as well as total attenuation coefficients, in any element, compound or mixture, at energies from 1 keV to 100 GeV

  8. X-ray spectrometer instrumentation with a personal computer

    International Nuclear Information System (INIS)

    Skaarup, P.; Vogeley, E.

    1989-01-01

    A description is given of an instrumentation for control of an X-ray spectrometer used in solid state physics experiments. The instrumentation includes a personal computer (PC) and a European Computer Bus (ECB) interface system. Details are given of the operating software. (author)

  9. Reliability of voxel gray values in cone beam computed tomography for preoperative implant planning assessment

    NARCIS (Netherlands)

    Parsa, A.; Ibrahim, N.; Hassan, B.; Motroni, A.; van der Stelt, P.; Wismeijer, D.

    2012-01-01

    Purpose: To assess the reliability of cone beam computed tomography (CBCT) voxel gray value measurements using Hounsfield units (HU) derived from multislice computed tomography (MSCT) as a clinical reference (gold standard). Materials and Methods: Ten partially edentulous human mandibular cadavers

  10. [Use of personal computers by diplomats of anesthesiology in Japan].

    Science.gov (United States)

    Yamamoto, K; Ohmura, S; Tsubokawa, T; Kita, M; Kushida, Y; Kobayashi, T

    1999-04-01

    Use of personal computers by diplomats of the Japanese Board of Anesthesiology working in Japanese university hospitals was investigated. Unsigned questionnaires were returned from 232 diplomats of 18 anesthesia departments. The age of responders ranged from twenties to sixties. Personal computer systems are used by 223 diplomats (96.1%), while nine (3.9%) do not use them. The computer systems used are: Apple Macintosh 77%, IBM compatible PC 21% and UNIX 2%. Although 197 diplomats have e-mail addresses, only 162 of them actually send and receive e-mails. Diplomats in fifties use e-mail most actively and those in sixties come second.

  11. To the problem of reliability standardization in computer-aided manufacturing at NPP units

    International Nuclear Information System (INIS)

    Yastrebenetskij, M.A.; Shvyryaev, Yu.V.; Spektor, L.I.; Nikonenko, I.V.

    1989-01-01

    The problems of reliability standardization in computer-aided manufacturing of NPP units considering the following approaches: computer-aided manufacturing of NPP units as a part of automated technological complex; computer-aided manufacturing of NPP units as multi-functional system, are analyzed. Selection of the composition of reliability indeces for computer-aided manufacturing of NPP units for each of the approaches considered is substantiated

  12. Reliability and validity of the German version of the Structured Interview of Personality Organization (STIPO)

    Science.gov (United States)

    2013-01-01

    Background The assessment of personality organization and its observable behavioral manifestations, i.e. personality functioning, has a long tradition in psychodynamic psychiatry. Recently, the DSM-5 Levels of Personality Functioning Scale has moved it into the focus of psychiatric diagnostics. Based on Kernberg’s concept of personality organization the Structured Interview of Personality Organization (STIPO) was developed for diagnosing personality functioning. The STIPO covers seven dimensions: (1) identity, (2) object relations, (3) primitive defenses, (4) coping/rigidity, (5) aggression, (6) moral values, and (7) reality testing and perceptual distortions. The English version of the STIPO has previously revealed satisfying psychometric properties. Methods Validity and reliability of the German version of the 100-item instrument have been evaluated in 122 psychiatric patients. All patients were diagnosed according to the Diagnostic and Statistical Manual for Mental Disorders (DSM-IV) and were assessed by means of the STIPO. Moreover, all patients completed eight questionnaires that served as criteria for external validity of the STIPO. Results Interrater reliability varied between intraclass correlations of .89 and 1.0, Crohnbach’s α for the seven dimensions was .69 to .93. All a priori selected questionnaire scales correlated significantly with the corresponding STIPO dimensions. Patients with personality disorder (PD) revealed significantly higher STIPO scores (i.e. worse personality functioning) than patients without PD; patients cluster B PD showed significantly higher STIPO scores than patients with cluster C PD. Conclusions Interrater reliability, Crohnbach’s α, concurrent validity, and differential validity of the STIPO are satisfying. The STIPO represents an appropriate instrument for the assessment of personality functioning in clinical and research settings. PMID:23941404

  13. A computational Bayesian approach to dependency assessment in system reliability

    International Nuclear Information System (INIS)

    Yontay, Petek; Pan, Rong

    2016-01-01

    Due to the increasing complexity of engineered products, it is of great importance to develop a tool to assess reliability dependencies among components and systems under the uncertainty of system reliability structure. In this paper, a Bayesian network approach is proposed for evaluating the conditional probability of failure within a complex system, using a multilevel system configuration. Coupling with Bayesian inference, the posterior distributions of these conditional probabilities can be estimated by combining failure information and expert opinions at both system and component levels. Three data scenarios are considered in this study, and they demonstrate that, with the quantification of the stochastic relationship of reliability within a system, the dependency structure in system reliability can be gradually revealed by the data collected at different system levels. - Highlights: • A Bayesian network representation of system reliability is presented. • Bayesian inference methods for assessing dependencies in system reliability are developed. • Complete and incomplete data scenarios are discussed. • The proposed approach is able to integrate reliability information from multiple sources at multiple levels of the system.

  14. Data entry system for INIS input using a personal computer

    International Nuclear Information System (INIS)

    Ishikawa, Masashi

    1990-01-01

    Input preparation for the INIS (International Nuclear Information System) has been performed by Japan Atomic Energy Research Institute since 1970. Instead of the input data preparation done by worksheets make out with the typewriters, new method with which data can be directly inputted into a diskette using personal computers is introduced. According to the popularization of personal computers and word processors, this system is easily applied to other system, so the outline and the future development on it are described. A shortcoming of this system is that spell-checking and data entry using authority files are hardly performed because of the limitation of hardware resources, and that data code conversion is needed because applied code systems between personal computer and main frame computer are quite different from each other. On the other hand, improving the timelyness of data entry is expected without duplication of keying. (author)

  15. Personal computer versus personal computer/mobile device combination users' preclinical laboratory e-learning activity.

    Science.gov (United States)

    Kon, Haruka; Kobayashi, Hiroshi; Sakurai, Naoki; Watanabe, Kiyoshi; Yamaga, Yoshiro; Ono, Takahiro

    2017-11-01

    The aim of the present study was to clarify differences between personal computer (PC)/mobile device combination and PC-only user patterns. We analyzed access frequency and time spent on a complete denture preclinical website in order to maximize website effectiveness. Fourth-year undergraduate students (N=41) in the preclinical complete denture laboratory course were invited to participate in this survey during the final week of the course to track login data. Students accessed video demonstrations and quizzes via our e-learning site/course program, and were instructed to view online demonstrations before classes. When the course concluded, participating students filled out a questionnaire about the program, their opinions, and devices they had used to access the site. Combination user access was significantly more frequent than PC-only during supplementary learning time, indicating that students with mobile devices studied during lunch breaks and before morning classes. Most students had favorable opinions of the e-learning site, but a few combination users commented that some videos were too long and that descriptive answers were difficult on smartphones. These results imply that mobile devices' increased accessibility encouraged learning by enabling more efficient time use between classes. They also suggest that e-learning system improvements should cater to mobile device users by reducing video length and including more short-answer questions. © 2016 John Wiley & Sons Australia, Ltd.

  16. Estimating the Reliability of Aggregated and Within-Person Centered Scores in Ecological Momentary Assessment

    Science.gov (United States)

    Huang, Po-Hsien; Weng, Li-Jen

    2012-01-01

    A procedure for estimating the reliability of test scores in the context of ecological momentary assessment (EMA) was proposed to take into account the characteristics of EMA measures. Two commonly used test scores in EMA were considered: the aggregated score (AGGS) and the within-person centered score (WPCS). Conceptually, AGGS and WPCS represent…

  17. Quantum mechanics on the personal computer

    International Nuclear Information System (INIS)

    Brandt, S.; Dahmen, H.D.

    1989-01-01

    'Quantum Mechanics on the PC' presents the most up-to-date access to elementary quantum mechanics. Based on the interactive program Interquanta (included on a 5 1/4'' Floppy Disk, MS-DOS) and its extensive 3D colour graphic features, the book guides its readers through computer experiments on - free particles and wave packets - bound states in various potentials - coherent and squeezed states in time-dependent motion - scattering and resonances - analogies in optics - quantized angular momentum - distinguishable and indistinguishable particles - special functions of mathematical physics. The course with a wide variety of more than 250 detailed, class-tested problems provides students with a unique practical experience of complex probability amplitudes, eigenvalues, scattering cross sections and the like. Lecturers and teachers will find excellent, hands-on classroom demonstrations for their quantum mechanics course. (orig.)

  18. Comparison of reliability of lateral cephalogram and computed ...

    African Journals Online (AJOL)

    2014-05-07

    May 7, 2014 ... measurements acquired from both the modalities are reliable and reproducible, but .... paint on all the slice of the image stack in the axial plane of ..... between body mass index, age and upper airway measurements in snorers.

  19. Use of computer codes for system reliability analysis

    International Nuclear Information System (INIS)

    Sabek, M.; Gaafar, M.; Poucet, A.

    1988-01-01

    This paper gives a collective summary of the studies performed at the JRC, ISPRA on the use of computer codes for complex systems analysis. The computer codes dealt with are: CAFTS-SALP software package, FRANTIC, FTAP, computer code package RALLY, and BOUNDS codes. Two reference study cases were executed by each code. The results obtained logic/probabilistic analysis as well as computation time are compared

  20. Fab the coming revolution on your desktop : from personal computers to personal fabrication

    CERN Document Server

    Gershenfeld, Neil

    2005-01-01

    What if you could someday put the manufacturing power of an automobile plant on your desktop? According to Neil Gershenfeld, the renowned MIT scientist and inventor, the next big thing is personal fabrication-the ability to design and produce your own products, in your own home, with a machine that combines consumer electronics and industrial tools. Personal fabricators are about to revolutionize the world just as personal computers did a generation ago, and Fab shows us how.

  1. Subjective assessment of chimpanzee (Pan troglodytes) personality: reliability and stability of trait ratings.

    Science.gov (United States)

    Dutton, Diane M

    2008-10-01

    A 46-item rating scale was used to obtain personality ratings from 75 captive chimpanzees (Pan troglodytes) from 7 zoological parks. Factor analysis revealed five personality dimensions similar to those found in previous research on primate personality: Agreeableness, Dominance, Neuroticism, Extraversion and Intellect. There were significant sex and age differences in ratings on these dimensions, with males rated more highly on Dominance and older chimpanzees rated as more agreeable but less extraverted than younger chimpanzees. Interobserver agreement for most individual trait items was high, but tended to be less reliable for trait terms expressing more subtle social or cognitive abilities. Personality ratings for one zoo were found to be largely stable across a 3-year period, but highlighted the effects of environmental factors on the expression of personality in captive chimpanzees.

  2. Integrated Markov-neural reliability computation method: A case for multiple automated guided vehicle system

    International Nuclear Information System (INIS)

    Fazlollahtabar, Hamed; Saidi-Mehrabad, Mohammad; Balakrishnan, Jaydeep

    2015-01-01

    This paper proposes an integrated Markovian and back propagation neural network approaches to compute reliability of a system. While states of failure occurrences are significant elements for accurate reliability computation, Markovian based reliability assessment method is designed. Due to drawbacks shown by Markovian model for steady state reliability computations and neural network for initial training pattern, integration being called Markov-neural is developed and evaluated. To show efficiency of the proposed approach comparative analyses are performed. Also, for managerial implication purpose an application case for multiple automated guided vehicles (AGVs) in manufacturing networks is conducted. - Highlights: • Integrated Markovian and back propagation neural network approach to compute reliability. • Markovian based reliability assessment method. • Managerial implication is shown in an application case for multiple automated guided vehicles (AGVs) in manufacturing networks

  3. Retrieval of articles in personal computer

    International Nuclear Information System (INIS)

    Choi, Byung Gil; Park, Seog Hee; Kim, Sung Hoon; Shinn, Kyung Sub

    1994-01-01

    Although many useful articles appear in the journals published in Korea, they are not always cited by researchers mainly due to absence of efficient searching system. The authors made a program with 6 predefined filtering forms to detect published articles rapidly and accurately. The programs was coded using database management system CA-Clipper Version 5.2 (Computer Associates International, Inc.) through preliminary work for 1 year. We used 486 DX II (8 Mbyte RAM, VGA, 200 Mbyte Hard Disk). Ink-jet Printer (Hewlett Packard Company), and MS-DOS Version 5.0 (Microsoft Co). We inputted total of 1986 articles published in the Journal of Korea Radiological Society from 1981 to 1993. The searching time was 10 to 15 seconds for each use. We had very flexible user interfaces and simplified searching methods, but more complicated filtering could also be performed. Although the previous version have had some bugs, this upgrade version resolved the problems and fitted in searching articles. The program would be valuable for radiologist in searching articles published not only in the Journal of the Korean Radiological Society, but also in the Journal of the Korean Society of Medicine Ultrasound and the Korean Journal of Nuclear Medicine

  4. Reliability

    OpenAIRE

    Condon, David; Revelle, William

    2017-01-01

    Separating the signal in a test from the irrelevant noise is a challenge for all measurement. Low test reliability limits test validity, attenuates important relationships, and can lead to regression artifacts. Multiple approaches to the assessment and improvement of reliability are discussed. The advantages and disadvantages of several different approaches to reliability are considered. Practical advice on how to assess reliability using open source software is provided.

  5. Archetype-Based Modeling of Persona for Comprehensive Personality Computing from Personal Big Data

    Science.gov (United States)

    Ma, Jianhua

    2018-01-01

    A model describing the wide variety of human behaviours called personality, is becoming increasingly popular among researchers due to the widespread availability of personal big data generated from the use of prevalent digital devices, e.g., smartphones and wearables. Such an approach can be used to model an individual and even digitally clone a person, e.g., a Cyber-I (cyber individual). This work is aimed at establishing a unique and comprehensive description for an individual to mesh with various personalized services and applications. An extensive research literature on or related to psychological modelling exists, i.e., into automatic personality computing. However, the integrity and accuracy of the results from current automatic personality computing is insufficient for the elaborate modeling in Cyber-I due to an insufficient number of data sources. To reach a comprehensive psychological description of a person, it is critical to bring in heterogeneous data sources that could provide plenty of personal data, i.e., the physiological data, and the Internet data. In addition, instead of calculating personality traits from personal data directly, an approach to a personality model derived from the theories of Carl Gustav Jung is used to measure a human subject’s persona. Therefore, this research is focused on designing an archetype-based modeling of persona covering an individual’s facets in different situations to approach a comprehensive personality model. Using personal big data to measure a specific persona in a certain scenario, our research is designed to ensure the accuracy and integrity of the generated personality model. PMID:29495343

  6. Archetype-Based Modeling of Persona for Comprehensive Personality Computing from Personal Big Data.

    Science.gov (United States)

    Guo, Ao; Ma, Jianhua

    2018-02-25

    A model describing the wide variety of human behaviours called personality, is becoming increasingly popular among researchers due to the widespread availability of personal big data generated from the use of prevalent digital devices, e.g., smartphones and wearables. Such an approach can be used to model an individual and even digitally clone a person, e.g., a Cyber-I (cyber individual). This work is aimed at establishing a unique and comprehensive description for an individual to mesh with various personalized services and applications. An extensive research literature on or related to psychological modelling exists, i.e., into automatic personality computing. However, the integrity and accuracy of the results from current automatic personality computing is insufficient for the elaborate modeling in Cyber-I due to an insufficient number of data sources. To reach a comprehensive psychological description of a person, it is critical to bring in heterogeneous data sources that could provide plenty of personal data, i.e., the physiological data, and the Internet data. In addition, instead of calculating personality traits from personal data directly, an approach to a personality model derived from the theories of Carl Gustav Jung is used to measure a human subject's persona. Therefore, this research is focused on designing an archetype-based modeling of persona covering an individual's facets in different situations to approach a comprehensive personality model. Using personal big data to measure a specific persona in a certain scenario, our research is designed to ensure the accuracy and integrity of the generated personality model.

  7. Archetype-Based Modeling of Persona for Comprehensive Personality Computing from Personal Big Data

    Directory of Open Access Journals (Sweden)

    Ao Guo

    2018-02-01

    Full Text Available A model describing the wide variety of human behaviours called personality, is becoming increasingly popular among researchers due to the widespread availability of personal big data generated from the use of prevalent digital devices, e.g., smartphones and wearables. Such an approach can be used to model an individual and even digitally clone a person, e.g., a Cyber-I (cyber individual. This work is aimed at establishing a unique and comprehensive description for an individual to mesh with various personalized services and applications. An extensive research literature on or related to psychological modelling exists, i.e., into automatic personality computing. However, the integrity and accuracy of the results from current automatic personality computing is insufficient for the elaborate modeling in Cyber-I due to an insufficient number of data sources. To reach a comprehensive psychological description of a person, it is critical to bring in heterogeneous data sources that could provide plenty of personal data, i.e., the physiological data, and the Internet data. In addition, instead of calculating personality traits from personal data directly, an approach to a personality model derived from the theories of Carl Gustav Jung is used to measure a human subject’s persona. Therefore, this research is focused on designing an archetype-based modeling of persona covering an individual’s facets in different situations to approach a comprehensive personality model. Using personal big data to measure a specific persona in a certain scenario, our research is designed to ensure the accuracy and integrity of the generated personality model.

  8. Soft computing approach for reliability optimization: State-of-the-art survey

    International Nuclear Information System (INIS)

    Gen, Mitsuo; Yun, Young Su

    2006-01-01

    In the broadest sense, reliability is a measure of performance of systems. As systems have grown more complex, the consequences of their unreliable behavior have become severe in terms of cost, effort, lives, etc., and the interest in assessing system reliability and the need for improving the reliability of products and systems have become very important. Most solution methods for reliability optimization assume that systems have redundancy components in series and/or parallel systems and alternative designs are available. Reliability optimization problems concentrate on optimal allocation of redundancy components and optimal selection of alternative designs to meet system requirement. In the past two decades, numerous reliability optimization techniques have been proposed. Generally, these techniques can be classified as linear programming, dynamic programming, integer programming, geometric programming, heuristic method, Lagrangean multiplier method and so on. A Genetic Algorithm (GA), as a soft computing approach, is a powerful tool for solving various reliability optimization problems. In this paper, we briefly survey GA-based approach for various reliability optimization problems, such as reliability optimization of redundant system, reliability optimization with alternative design, reliability optimization with time-dependent reliability, reliability optimization with interval coefficients, bicriteria reliability optimization, and reliability optimization with fuzzy goals. We also introduce the hybrid approaches for combining GA with fuzzy logic, neural network and other conventional search techniques. Finally, we have some experiments with an example of various reliability optimization problems using hybrid GA approach

  9. Computer Self-Efficacy, Computer Anxiety, Performance and Personal Outcomes of Turkish Physical Education Teachers

    Science.gov (United States)

    Aktag, Isil

    2015-01-01

    The purpose of this study is to determine the computer self-efficacy, performance outcome, personal outcome, and affect and anxiety level of physical education teachers. Influence of teaching experience, computer usage and participation of seminars or in-service programs on computer self-efficacy level were determined. The subjects of this study…

  10. Spatiotemporal Dynamics and Reliable Computations in Recurrent Spiking Neural Networks

    Science.gov (United States)

    Pyle, Ryan; Rosenbaum, Robert

    2017-01-01

    Randomly connected networks of excitatory and inhibitory spiking neurons provide a parsimonious model of neural variability, but are notoriously unreliable for performing computations. We show that this difficulty is overcome by incorporating the well-documented dependence of connection probability on distance. Spatially extended spiking networks exhibit symmetry-breaking bifurcations and generate spatiotemporal patterns that can be trained to perform dynamical computations under a reservoir computing framework.

  11. Spatiotemporal Dynamics and Reliable Computations in Recurrent Spiking Neural Networks.

    Science.gov (United States)

    Pyle, Ryan; Rosenbaum, Robert

    2017-01-06

    Randomly connected networks of excitatory and inhibitory spiking neurons provide a parsimonious model of neural variability, but are notoriously unreliable for performing computations. We show that this difficulty is overcome by incorporating the well-documented dependence of connection probability on distance. Spatially extended spiking networks exhibit symmetry-breaking bifurcations and generate spatiotemporal patterns that can be trained to perform dynamical computations under a reservoir computing framework.

  12. USAGE OF STANDARD PERSONAL COMPUTER PORTS FOR DESIGNING OF THE DOUBLE REDUNDANT FAULT-TOLERANT COMPUTER CONTROL SYSTEMS

    Directory of Open Access Journals (Sweden)

    Rafig SAMEDOV

    2005-01-01

    Full Text Available In this study, for designing of the fault-tolerant control systems by using standard personal computers, the ports have been investigated, different structure versions have been designed and the method for choosing of an optimal structure has been suggested. In this scope, first of all, the ÇİFTYAK system has been defined and its work principle has been determined. Then, data transmission ports of the standard personal computers have been classified and analyzed. After that, the structure versions have been designed and evaluated according to the used data transmission methods, the numbers of ports and the criterions of reliability, performance, truth, control and cost. Finally, the method for choosing of the most optimal structure version has been suggested.

  13. Use of computer codes for system reliability analysis

    International Nuclear Information System (INIS)

    Sabek, M.; Gaafar, M.; Poucet, A.

    1989-01-01

    This paper gives a summary of studies performed at the JRC, ISPRA on the use of computer codes for complex systems analysis. The computer codes dealt with are: CAFTS-SALP software package, FRACTIC, FTAP, computer code package RALLY, and BOUNDS. Two reference case studies were executed by each code. The probabilistic results obtained, as well as the computation times are compared. The two cases studied are the auxiliary feedwater system of a 1300 MW PWR reactor and the emergency electrical power supply system. (author)

  14. Use of computer codes for system reliability analysis

    Energy Technology Data Exchange (ETDEWEB)

    Sabek, M.; Gaafar, M. (Nuclear Regulatory and Safety Centre, Atomic Energy Authority, Cairo (Egypt)); Poucet, A. (Commission of the European Communities, Ispra (Italy). Joint Research Centre)

    1989-01-01

    This paper gives a summary of studies performed at the JRC, ISPRA on the use of computer codes for complex systems analysis. The computer codes dealt with are: CAFTS-SALP software package, FRACTIC, FTAP, computer code package RALLY, and BOUNDS. Two reference case studies were executed by each code. The probabilistic results obtained, as well as the computation times are compared. The two cases studied are the auxiliary feedwater system of a 1300 MW PWR reactor and the emergency electrical power supply system. (author).

  15. Reliability of the NEO Five Factor Inventory short form for assessing personality after stroke.

    Science.gov (United States)

    Dwan, Toni; Ownsworth, Tamara; Donovan, Caroline; Lo, Ada Ho Yan

    2017-07-01

    It is well recognized that an individual's personality characteristics influence their psychological adjustment after stroke. However, there is a lack of research on the reliability of personality inventories for stroke. This study primarily aimed to evaluate the reliability of the Neuroticism, Extroversion, Openness to Experience (NEO)-Five Factor Inventory (NEO-FFI) for assessing pre-morbid personality and personality changes after stroke. Further aims were to investigate changes in personality during the hospital-to-home transition period and examine associations between personality and mood. Forty participants with stroke (52.5% male, M age=65.55 years) were recruited at time of hospital discharge and completed the NEO-FFI, Centre for Epidemiologic Studies - Depression and Geriatric Anxiety Inventory. Significant others completed an informant version of the NEO-FFI. Stroke participants were re-assessed on the NEO-FFI at 1-month and 4-months post-discharge. Forty matched controls also completed the NEO-FFI. Internal consistency was adequate for the NEO-FFI (α=0.57-0.86), although low for agreeableness. There was fair to excellent concordance between self-rated and informant versions of the NEO-FFI (ICC=0.58-0.78). Significant positive associations were found between neuroticism and mood (r=0.50-0.68), and significant negative associations were found between extraversion and mood (r=-0.33-0.36) and agreeableness and anxiety (r=-0.43). Self-ratings of stroke participants on the NEO-FFI at discharge did not significantly differ from matched controls. Extraversion levels significantly decreased, and agreeableness levels significantly increased between discharge and 1- and 4-months post-discharge. Overall, the results support the reliability of the NEO-FFI for assessing personality characteristics in the context of stroke.

  16. Design for reliability information and computer-based systems

    CERN Document Server

    Bauer, Eric

    2010-01-01

    "System reliability, availability and robustness are often not well understood by system architects, engineers and developers. They often don't understand what drives customer's availability expectations, how to frame verifiable availability/robustness requirements, how to manage and budget availability/robustness, how to methodically architect and design systems that meet robustness requirements, and so on. The book takes a very pragmatic approach of framing reliability and robustness as a functional aspect of a system so that architects, designers, developers and testers can address it as a concrete, functional attribute of a system, rather than an abstract, non-functional notion"--Provided by publisher.

  17. Reliability and validity of the Farsi version of the standardized assessment of personality-abbreviated scale

    Directory of Open Access Journals (Sweden)

    Maryam Sepehri

    2017-06-01

    Full Text Available Introduction: A short screening tool for high-risk individuals with personality disorder (PD is useful both for clinicians and researchers. The aim of this study was to assess the validity and reliability of the Farsi version of the Standardized Assessment of Personality-Abbreviated Scale (SAPAS. Methods: The original English version of the SAPAS questionnaire was translated into Farsi, and then, translated back into English by two professionals. A survey was then conducted using the questionnaire on 150 clients of primary health care centers in Tabriz, Iran. A total of 235 medical students were also studied for the reliability assessment of the questionnaire. The SAPAS was compared to the short form of Minnesota Multiphasic Personality Inventory (MMPI. The data analysis was performed using receiver operating characteristic (ROC curve technique, operating characteristic for diagnostic efficacy, Cronbach's alpha, and test-retest for reliability evaluation. Results: We found an area under the curve (AUC of 0.566 [95% confidence intervals (CI: 0.455-0.677]; sensitivity of 0.89 and specificity of 0.26 at the cut-off score of 2 and higher. The total Cronbach's alpha coefficient was 0.38 and Cohen's kappa ranged between 0.5 and 0.8. Conclusion: The current study showed that the Farsi version of the SAPAS was relatively less efficient, in term of validity and reliability, in the screening of PD in the population.

  18. Methods to compute reliabilities for genomic predictions of feed intake

    Science.gov (United States)

    For new traits without historical reference data, cross-validation is often the preferred method to validate reliability (REL). Time truncation is less useful because few animals gain substantial REL after the truncation point. Accurate cross-validation requires separating genomic gain from pedigree...

  19. Direct unavailability computation of a maintained highly reliable system

    Czech Academy of Sciences Publication Activity Database

    Briš, R.; Byczanski, Petr

    2010-01-01

    Roč. 224, č. 3 (2010), s. 159-170 ISSN 1748-0078 Grant - others:GA Mšk(CZ) MSM6198910007 Institutional research plan: CEZ:AV0Z30860518 Keywords : high reliability * availability * directed acyclic graph Subject RIV: BA - General Mathematics http:// journals .pepublishing.com/content/rtp3178l17923m46/

  20. Models of Information Security Highly Reliable Computing Systems

    Directory of Open Access Journals (Sweden)

    Vsevolod Ozirisovich Chukanov

    2016-03-01

    Full Text Available Methods of the combined reservation are considered. The models of reliability of systems considering parameters of restoration and prevention of blocks of system are described. Ratios for average quantity prevention and an availability quotient of blocks of system are given.

  1. The use of personal computers for self-teaching

    International Nuclear Information System (INIS)

    Levrat, B.

    1983-01-01

    The number of personal computers is growing at a phenomenal rate. Their capabilities in man-machine interaction makes them useful in teaching a variety of subjects. They can offer a stimulating presentation of the material to be learned, varied drill and practice exercices and simulations. Testing, evaluation and progress monitoring are also possible. Key issues about quality and content should not be left to businessmen alone. At CERN, Computer Aided Learning could be useful in connexion with large experiments. (orig.)

  2. Fault-tolerant search algorithms reliable computation with unreliable information

    CERN Document Server

    Cicalese, Ferdinando

    2013-01-01

    Why a book on fault-tolerant search algorithms? Searching is one of the fundamental problems in computer science. Time and again algorithmic and combinatorial issues originally studied in the context of search find application in the most diverse areas of computer science and discrete mathematics. On the other hand, fault-tolerance is a necessary ingredient of computing. Due to their inherent complexity, information systems are naturally prone to errors, which may appear at any level - as imprecisions in the data, bugs in the software, or transient or permanent hardware failures. This book pr

  3. Reliability in Warehouse-Scale Computing: Why Low Latency Matters

    DEFF Research Database (Denmark)

    Nannarelli, Alberto

    2015-01-01

    , the limiting factor of these warehouse-scale data centers is the power dissipation. Power is dissipated not only in the computation itself, but also in heat removal (fans, air conditioning, etc.) to keep the temperature of the devices within the operating ranges. The need to keep the temperature low within......Warehouse sized buildings are nowadays hosting several types of large computing systems: from supercomputers to large clusters of servers to provide the infrastructure to the cloud. Although the main target, especially for high-performance computing, is still to achieve high throughput...

  4. Towards early software reliability prediction for computer forensic tools (case study).

    Science.gov (United States)

    Abu Talib, Manar

    2016-01-01

    Versatility, flexibility and robustness are essential requirements for software forensic tools. Researchers and practitioners need to put more effort into assessing this type of tool. A Markov model is a robust means for analyzing and anticipating the functioning of an advanced component based system. It is used, for instance, to analyze the reliability of the state machines of real time reactive systems. This research extends the architecture-based software reliability prediction model for computer forensic tools, which is based on Markov chains and COSMIC-FFP. Basically, every part of the computer forensic tool is linked to a discrete time Markov chain. If this can be done, then a probabilistic analysis by Markov chains can be performed to analyze the reliability of the components and of the whole tool. The purposes of the proposed reliability assessment method are to evaluate the tool's reliability in the early phases of its development, to improve the reliability assessment process for large computer forensic tools over time, and to compare alternative tool designs. The reliability analysis can assist designers in choosing the most reliable topology for the components, which can maximize the reliability of the tool and meet the expected reliability level specified by the end-user. The approach of assessing component-based tool reliability in the COSMIC-FFP context is illustrated with the Forensic Toolkit Imager case study.

  5. Functional magnetic resonance maps obtained by personal computer

    International Nuclear Information System (INIS)

    Gomez, F. j.; Manjon, J. V.; Robles, M.; Marti-Bonmati, L.; Dosda, R.; Molla, E.

    2001-01-01

    Functional magnetic resonance (fMR) is of special relevance in the analysis of certain types of brain activation. The present report describes the development of a simple software program for use with personal computers (PCs) that analyzes these images and provides functional activation maps. Activation maps are based on the temporal differences in oxyhemoglobin in tomographic images. To detect these differences, intensities registered repeatedly during brain control and activation are compared. The experiments were performed with a 1.5-Tesla MR unit. To verify the reliability of the program fMR studies were carried out in 4 healthy individuals (12 contiguous slices, 80 images per slice every 3.1 seconds for a total of 960 images). All the images were transferred to a PC and were processed pixel by pixel within each sequence to obtain an intensity/time curve. The statistical study of the results (Student's test and cross correlation analysis) made it possible to establish the activation of each pixel. The images were prepared using spatial filtering, temporal filtering, baseline correction, normalization and segmentation of the parenchyma. The postprocessing of the results involved the elimination of single pixels, superposition of an anatomical image of greater spatial resolution and anti-aliasing. The application (Xfun 1.0, Valencia, Spain) was developed in Microsoft Visual C++5.0 Developer Studio for Windows NT Workstation. As a representative example, the program took 8.2 seconds to calculate and present the results of the entire study (12 functional maps). In the motor and visual activation experiments, the activation corresponding to regions proximal to the central sulcus of the hemisphere contralateral to the hand that moved and in the occipital cortex were observed. While programs that calculate activation maps are available, the development of software for PCs running Microsoft Windows ensures several key features for its use on a daily basis: it is easy

  6. A pilot study of change in cerebral activity during personality rating by questionnaire and personal computer.

    Science.gov (United States)

    Sato, Emi; Matsuda, Kouhei

    2018-06-11

    The purpose of this study was to examine cerebral blood flow in the frontal cortex area during personality self-rating tasks. Our two hypotheses were (1) cerebral blood flow varies based on personality rating condition and (2) cerebral blood flow varies based on the personality traits. This experiment measured cerebral blood flow under 3 personal computer rating conditions and 2 questionnaire conditions. Comparing the rating conditions, the results of the t-test indicated that cerebral blood flow was higher in the questionnaire condition than it was in the personal computer condition. With respect to the Big Five, the result of the correlation coefficient, that is, cerebral blood flow during a personality rating task, changed according to the trait for agreeableness. The results of the analysis of the 5-cluster on individual differences indicated that certain personality traits were related to the factors that increased or decreased cerebral blood flow. An analysis of variance indicated that openness to experience and Behavioural Activation System-drive was significant given that participants with high intellectual curiosity were motivated in this experiment, thus, their cerebral blood flow may have increased. The significance of this experiment was that by employing certain performance measures we could examine differences in physical changes based on personality traits. © 2018 International Union of Psychological Science.

  7. Improving personality facet scores with multidimensional computer adaptive testing

    DEFF Research Database (Denmark)

    Makransky, Guido; Mortensen, Erik Lykke; Glas, Cees A W

    2013-01-01

    personality tests contain many highly correlated facets. This article investigates the possibility of increasing the precision of the NEO PI-R facet scores by scoring items with multidimensional item response theory and by efficiently administering and scoring items with multidimensional computer adaptive...

  8. Regional Platform on Personal Computer Electronic Waste in Latin ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Regional Platform on Personal Computer Electronic Waste in Latin America and the Caribbean. Donation of ... This project aims to identify environmentally responsible and sustainable solutions to the problem of e-waste. ... Policy in Focus publishes a special issue profiling evidence to empower women in the labour market.

  9. A personal computer-based nuclear magnetic resonance spectrometer

    Science.gov (United States)

    Job, Constantin; Pearson, Robert M.; Brown, Michael F.

    1994-11-01

    Nuclear magnetic resonance (NMR) spectroscopy using personal computer-based hardware has the potential of enabling the application of NMR methods to fields where conventional state of the art equipment is either impractical or too costly. With such a strategy for data acquisition and processing, disciplines including civil engineering, agriculture, geology, archaeology, and others have the possibility of utilizing magnetic resonance techniques within the laboratory or conducting applications directly in the field. Another aspect is the possibility of utilizing existing NMR magnets which may be in good condition but unused because of outdated or nonrepairable electronics. Moreover, NMR applications based on personal computer technology may open up teaching possibilities at the college or even secondary school level. The goal of developing such a personal computer (PC)-based NMR standard is facilitated by existing technologies including logic cell arrays, direct digital frequency synthesis, use of PC-based electrical engineering software tools to fabricate electronic circuits, and the use of permanent magnets based on neodymium-iron-boron alloy. Utilizing such an approach, we have been able to place essentially an entire NMR spectrometer console on two printed circuit boards, with the exception of the receiver and radio frequency power amplifier. Future upgrades to include the deuterium lock and the decoupler unit are readily envisioned. The continued development of such PC-based NMR spectrometers is expected to benefit from the fast growing, practical, and low cost personal computer market.

  10. A data acquisition system based on a personal computer

    International Nuclear Information System (INIS)

    Omata, K.; Fujita, Y.; Yoshikawa, N.; Sekiguchi, M.; Shida, Y.

    1991-07-01

    A versatile and flexible data acquisition system KODAQ (Kakuken Online Data AcQuisition system) has been developed. The system runs with CAMAC and a most popular Japanese personal computer, PC9801 (NEC), similar to the IBM PC/AT. The system is designed to set up easily a data acquisition system for various kinds of nuclear-physics experiments. (author)

  11. PERKAM: Personalized Knowledge Awareness Map for Computer Supported Ubiquitous Learning

    Science.gov (United States)

    El-Bishouty, Moushir M.; Ogata, Hiroaki; Yano, Yoneo

    2007-01-01

    This paper introduces a ubiquitous computing environment in order to support the learners while doing tasks; this environment is called PERKAM (PERsonalized Knowledge Awareness Map). PERKAM allows the learners to share knowledge, interact, collaborate, and exchange individual experiences. It utilizes the RFID ubiquities technology to detect the…

  12. Know Your Personal Computer Basic Input-Output System (BIOS)

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 2; Issue 7. Know Your Personal Computer Basic Input-Output System (BIOS). Siddhartha Kumar Ghoshal. Series Article Volume 2 Issue 7 July 1997 pp 48-54. Fulltext. Click here to view fulltext PDF. Permanent link:

  13. [Personal computer-based computer monitoring system of the anesthesiologist (2-year experience in development and use)].

    Science.gov (United States)

    Buniatian, A A; Sablin, I N; Flerov, E V; Mierbekov, E M; Broĭtman, O G; Shevchenko, V V; Shitikov, I I

    1995-01-01

    Creation of computer monitoring systems (CMS) for operating rooms is one of the most important spheres of personal computer employment in anesthesiology. The authors developed a PC RS/AT-based CMS and effectively used it for more than 2 years. This system permits comprehensive monitoring in cardiosurgical operations by real time processing the values of arterial and central venous pressure, pressure in the pulmonary artery, bioelectrical activity of the brain, and two temperature values. Use of this CMS helped appreciably improve patients' safety during surgery. The possibility to assess brain function by computer monitoring the EEF simultaneously with central hemodynamics and body temperature permit the anesthesiologist to objectively assess the depth of anesthesia and to diagnose cerebral hypoxia. Automated anesthesiological chart issued by the CMS after surgery reliably reflects the patient's status and the measures taken by the anesthesiologist.

  14. Personal computer as a part of radiometric gauges

    International Nuclear Information System (INIS)

    Machaj, B.

    1992-01-01

    Following the world tendency in the application of microcomputers in measuring instrumentation, standard personal computer, compatible with IBM PC/XT, was employed in the isotope gauges developed lately in the Institute. The are: beta backscatter coating thickness gauge, X-ray fluorescence multilayer coating thickness gauge with X-ray tube as radiation source, and automatic airborne dust pollution gauge. A simple interface containing: address decoder, programmable pulse counter, some buffers and latches was sufficient to connect the computer to the measuring head of the gauges. Thanks to the possibility of programming in higher level language (turbo Pascal), the gauges were developed in much shorter time than required for classical electronics. The experience gained during development of the gauges shows, that even in case of a simple instrument such as the beta backscatter coating thickness gauge, it is more economical to employ ready-made personal computer than to elaborate specific electronics for it, unless the gauge is produced in large numbers. The use of personal computer is particularly advantageous, when processing of the signal or control of the measuring cycle is more sophisticated, as in the case of the two other gauges. Block diagrams of the gauges and their interfaces are presented in the paper. In case of the airborne dust pollution gauge, flow chart of the computer program is also given. (author). 3 refs, 4 figs

  15. Heat exchanger performance analysis programs for the personal computer

    International Nuclear Information System (INIS)

    Putman, R.E.

    1992-01-01

    Numerous utility industry heat exchange calculations are repetitive and thus lend themselves to being performed on a Personal Computer. These programs may be regarded as engineering tools which, when put together, can form a Toolbox. However, the practicing Results Engineer in the utility industry desires not only programs that are robust as well as easy to use but can also be used both on desktop and laptop PC's. The latter also offer the opportunity to take the computer into the plant or control room, and use it there to process test or operating data right on the spot. Most programs evolve through the needs which arise in the course of day-to-day work. This paper describes several of the more useful programs of this type and outlines some of the guidelines to be followed when designing personal computer programs for use by the practicing Results Engineer

  16. Human-computer interface incorporating personal and application domains

    Science.gov (United States)

    Anderson, Thomas G [Albuquerque, NM

    2011-03-29

    The present invention provides a human-computer interface. The interface includes provision of an application domain, for example corresponding to a three-dimensional application. The user is allowed to navigate and interact with the application domain. The interface also includes a personal domain, offering the user controls and interaction distinct from the application domain. The separation into two domains allows the most suitable interface methods in each: for example, three-dimensional navigation in the application domain, and two- or three-dimensional controls in the personal domain. Transitions between the application domain and the personal domain are under control of the user, and the transition method is substantially independent of the navigation in the application domain. For example, the user can fly through a three-dimensional application domain, and always move to the personal domain by moving a cursor near one extreme of the display.

  17. Effective computing algorithm for maintenance optimization of highly reliable systems

    Czech Academy of Sciences Publication Activity Database

    Briš, R.; Byczanski, Petr

    2013-01-01

    Roč. 109, č. 1 (2013), s. 77-85 ISSN 0951-8320 R&D Projects: GA MŠk(CZ) ED1.1.00/02.0070 Institutional support: RVO:68145535 Keywords : exact computing * maintenance * optimization * unavailability Subject RIV: BA - General Mathematics Impact factor: 2.048, year: 2013 http://www.sciencedirect.com/science/article/pii/S0951832012001639

  18. Reliability and Validity of a Newly Developed Measure of Citizenship Among Persons with Mental Illnesses.

    Science.gov (United States)

    O'Connell, Maria J; Clayton, Ashley; Rowe, Michael

    2017-04-01

    Following development of a 46-item of measure citizenship, a framework for supporting the full membership in society of persons with mental illness, this study tested the measure's reliability and validity. 110 persons from a mental health center completed a questionnaire packet containing the citizenship measure and other measures to assess internal consistency and validity of the citizenship instrument. Correlation matrices were examined for associations between the citizenship instrument and other measures. Stepwise regression examines demographic factors, sense of community, and social capital as predictors of citizenship, recovery, and well-being. Analyses revealed that the measure is psychometrically sound. The measure captures subjective information about the degree to which individuals experience rights, sense of belonging, and other factors associated with community membership that have been previously difficult to assess. The measure establishes a platform for interventions to support the full participation in society of persons with mental illnesses.

  19. Intraobserver and intermethod reliability for using two different computer programs in preoperative lower limb alignment analysis

    Directory of Open Access Journals (Sweden)

    Mohamed Kenawey

    2016-12-01

    Conclusion: Computer assisted lower limb alignment analysis is reliable whether using graphics editing program or specialized planning software. However slight higher variability for angles away from the knee joint can be expected.

  20. Distributed Information and Control system reliability enhancement by fog-computing concept application

    Science.gov (United States)

    Melnik, E. V.; Klimenko, A. B.; Ivanov, D. Ya

    2018-03-01

    The paper focuses on the information and control system reliability issue. Authors of the current paper propose a new complex approach of information and control system reliability enhancement by application of the computing concept elements. The approach proposed consists of a complex of optimization problems to be solved. These problems are: estimation of computational complexity, which can be shifted to the edge of the network and fog-layer, distribution of computations among the data processing elements and distribution of computations among the sensors. The problems as well as some simulated results and discussion are formulated and presented within this paper.

  1. Personal computer control system for small size tandem accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Takayama, Hiroshi; Kawano, Kazuhiro; Shinozaki, Masataka [Nissin - High Voltage Co. Ltd., Kyoto (Japan)

    1996-12-01

    As the analysis apparatus using tandem accelerator has a lot of control parameter, numbers of control parts set on control panel are so many to make the panel more complex and its operativity worse. In order to improve these faults, development and design of a control system using personal computer for the control panel mainly constituted by conventional hardware parts were tried. Their predominant characteristics are shown as follows: (1) To make the control panel construction simpler and more compact, because the hardware device on the panel surface becomes the smallest limit as required by using a personal computer for man-machine interface. (2) To make control speed more rapid, because sequence control is closed within each block by driving accelerator system to each block and installing local station of the sequencer network at each block. (3) To make expandability larger, because of few improvement of the present hardware by interrupting the sequencer local station into the net and correcting image of the computer when increasing a new beamline. And, (4) to make control system cheaper, because of cheaper investment and easier programming by using the personal computer. (G.K.)

  2. A new efficient algorithm for computing the imprecise reliability of monotone systems

    International Nuclear Information System (INIS)

    Utkin, Lev V.

    2004-01-01

    Reliability analysis of complex systems by partial information about reliability of components and by different conditions of independence of components may be carried out by means of the imprecise probability theory which provides a unified framework (natural extension, lower and upper previsions) for computing the system reliability. However, the application of imprecise probabilities to reliability analysis meets with a complexity of optimization problems which have to be solved for obtaining the system reliability measures. Therefore, an efficient simplified algorithm to solve and decompose the optimization problems is proposed in the paper. This algorithm allows us to practically implement reliability analysis of monotone systems under partial and heterogeneous information about reliability of components and under conditions of the component independence or the lack of information about independence. A numerical example illustrates the algorithm

  3. Copyright and personal use of CERN’s computing infrastructure

    CERN Multimedia

    IT Department

    2009-01-01

    (La version française sera en ligne prochainement)The rules covering the personal use of CERN’s computing infrastructure are defined in Operational Circular No. 5 and its Subsidiary Rules (see http://cern.ch/ComputingRules). All users of CERN’s computing infrastructure must comply with these rules, whether they access CERN’s computing facilities from within the Organization’s site or at another location. In particular, OC5 clause 17 requires that proprietary rights (the rights in software, music, video, etc.) must be respected. The user is liable for damages resulting from non-compliance. Recently, there have been several violations of OC5, where copyright material was discovered on public world-readable disk space. Please ensure that all material under your responsibility (in particular in files owned by your account) respects proprietary rights, including with respect to the restriction of access by third parties. CERN Security Team

  4. Personalization and perceived personal relevance in computer-tailored persuasion in smoking cessation

    NARCIS (Netherlands)

    Dijkstra, Arie; Ballast, Karien

    Objectives. In most computer-tailored interventions, the recipient's name is used to personalize the information. This is done to increase the process of persuasion but few empirical data exist that support this notion. yDesign. An experimental laboratory study was conducted to test the effects of

  5. Reliability of a computer and Internet survey (Computer User Profile) used by adults with and without traumatic brain injury (TBI).

    Science.gov (United States)

    Kilov, Andrea M; Togher, Leanne; Power, Emma

    2015-01-01

    To determine test-re-test reliability of the 'Computer User Profile' (CUP) in people with and without TBI. The CUP was administered on two occasions to people with and without TBI. The CUP investigated the nature and frequency of participants' computer and Internet use. Intra-class correlation coefficients and kappa coefficients were conducted to measure reliability of individual CUP items. Descriptive statistics were used to summarize content of responses. Sixteen adults with TBI and 40 adults without TBI were included in the study. All participants were reliable in reporting demographic information, frequency of social communication and leisure activities and computer/Internet habits and usage. Adults with TBI were reliable in 77% of their responses to survey items. Adults without TBI were reliable in 88% of their responses to survey items. The CUP was practical and valuable in capturing information about social, leisure, communication and computer/Internet habits of people with and without TBI. Adults without TBI scored more items with satisfactory reliability overall in their surveys. Future studies may include larger samples and could also include an exploration of how people with/without TBI use other digital communication technologies. This may provide further information on determining technology readiness for people with TBI in therapy programmes.

  6. Presence and biofeedback in first-person perspective computer games

    DEFF Research Database (Denmark)

    Grimshaw-Aagaard, Mark Nicholas

    2019-01-01

    . Following the line taken by presence theorists, I differentiate between immersion, an objective measure such that computer game technology can be less or more immersive, and presence, a subjective, human response to that technology. The third section looks at current possibilities for biofeedback...... in relation to sound design for first-person perspective computer games; in line with the first section, biofeedback devices are treated as an immersive technology. I close the chapter by suggesting ways in which sound design in such games might make use of biofeedback to enhance the perception of presence...

  7. A software to report and file by personal computer

    International Nuclear Information System (INIS)

    Di Giandomenico, E.; Filippone, A.; Esposito, A.; Bonomo, L.

    1989-01-01

    During the past four years the authors have been gaining experince in reporting radiological examinations by personal computer. Today they describe the project of a new software which allows the reporting and filing of roentgenograms. This program was realized by a radiologist, using a well known data base management system: dBASE III. The program was shaped to fit the radiologist's needs: it helps to report, and allows to file, radiological data, with the diagnosic codes used by the American College of Radiology. In this paper the authors describe the data base structure and indicate the software functions which make its use possible. Thus, this paper is not aimed at advertising a new reporting program, but at demonstrating how the radiologist can himself manage some aspects of his work with the help of a personal computer

  8. Experimental data processing techniques by a personal computer

    International Nuclear Information System (INIS)

    Matsuura, Kiyokata; Tsuda, Kenzo; Abe, Yoshihiko; Kojima, Tsuyoshi; Nishikawa, Akira; Shimura, Hitoshi; Hyodo, Hiromi; Yamagishi, Shigeru.

    1989-01-01

    A personal computer (16-bit, about 1 MB memory) can be used at a low cost in the experimental data processing. This report surveys the important techniques on A/D and D/A conversion, display, store and transfer of the experimental data. It is also discussed the items to be considered in the software. Practical softwares programed BASIC and Assembler language are given as examples. Here, we present some techniques to get faster process in BASIC language and show that the system composed of BASIC and Assembler is useful in a practical experiment. The system performance such as processing speed and flexibility in setting operation condition will depend strongly on programming language. We have made test for processing speed by some typical programming languages; BASIC(interpreter), C, FORTRAN and Assembler. As for the calculation, FORTRAN has the best performance which is comparable to or better than Assembler even in the personal computer. (author)

  9. A performance evaluation of the IBM 370/XT personal computer

    Science.gov (United States)

    Dominick, Wayne D. (Editor); Triantafyllopoulos, Spiros

    1984-01-01

    An evaluation of the IBM 370/XT personal computer is given. This evaluation focuses primarily on the use of the 370/XT for scientific and technical applications and applications development. A measurement of the capabilities of the 370/XT was performed by means of test programs which are presented. Also included is a review of facilities provided by the operating system (VM/PC), along with comments on the IBM 370/XT hardware configuration.

  10. Personal computer wallpaper user segmentation based on Sasang typology.

    Science.gov (United States)

    Lee, Joung-Youn

    2015-03-01

    As human-computer interaction (HCI) is becoming a significant part of all human life, the user's emotional satisfaction is an important factor to consider. These changes have been pointed out by several researchers who claim that a user's personality may become the most important factor in the design. The objective of this study is to examine Sasang typology as a user segmentation method in the area of HCI design. To test HCI usage patterns in terms of the user's personality and temperament, this study focuses on personal computer (PC) or lap-top wallpaper settings. One hundred and four Facebook friends completed a QSCC II survey assessing Sasang typology type and sent a captured image of their personal PC or lap-top wallpaper. To classify the computer usage pattern, folder organization and wallpaper setting were investigated. The research showed that So-Yang type organized folders and icons in an orderly manner, whereas So-Eum type did not organize folders and icons at all. With regard to wallpaper settings, So-Yang type used the default wallpaper provided by the PC but So-Eum type used landscape images. Because So-Yang type was reported to be emotionally stable and extrovert, they tended to be highly concerned with online privacy compared with So-Eum type. So-Eum type use a lot of images of landscapes as the background image, which demonstrates So-Eum's low emotional stability, anxiety, and the desire to obtain analogy throughout the computer screen. Also, So-Yang's wallpapers display family or peripheral figures and this is due to the sociability that extrovert So-Yang types possess. By proposing the Sasang typology as a factor in influencing an HCI usage pattern in this study, it can be used to predict the user's HCI experience, or suggest a native design methodology that can actively cope with the user's psychological environment.

  11. Gamma spectrometric system based on the personal computer Pravetz-83

    International Nuclear Information System (INIS)

    Yanakiev, K; Grigorov, T.; Vuchkov, M.

    1985-01-01

    A gamma spectrometric system based on a personal microcomputer Pravets-85 is described. The analog modules are NIM standard. ADC data are stored in the memory of the computer via a DMA channel and a real-time data processing is possible. The results from a series of tests indicate that the performance of the system is comparable with that of comercially avalable computerized spectrometers Ortec and Canberra

  12. Test - retest reliability of two instruments for measuring public attitudes towards persons with mental illness

    Directory of Open Access Journals (Sweden)

    Leufstadius Christel

    2011-01-01

    Full Text Available Abstract Background Research has identified stigmatization as a major threat to successful treatment of individuals with mental illness. As a consequence several anti-stigma campaigns have been carried out. The results have been discouraging and the field suffers from lack of evidence about interventions that work. There are few reports on psychometric data for instruments used to assess stigma, which thus complicates research efforts. The aim of the present study was to investigate test-retest reliability of the Swedish versions of the questionnaires: FABI and "Changing Minds" and to examine the internal consistency of the two instruments. Method Two instruments, fear and behavioural intentions (FABI and "Changing Minds", used in earlier studies on public attitudes towards persons with mental illness were translated into Swedish and completed by 51 nursing students on two occasions, with an interval of three weeks. Test-retest reliability was calculated by using weighted kappa coefficient and internal consistency using the Cronbach's alpha coefficient. Results Both instruments attain at best moderate test-retest reliability. For the Changing Minds questionnaire almost one fifth (17.9% of the items present poor test-retest reliability and the alpha coefficient for the subscales ranges between 0.19 - 0.46. All of the items in the FABI reach a fair or a moderate agreement between the test and retest, and the questionnaire displays a high internal consistency, alpha 0.80. Conclusions There is a need for development of psychometrically tested instruments within this field of research.

  13. A Quantitative Risk Analysis Framework for Evaluating and Monitoring Operational Reliability of Cloud Computing

    Science.gov (United States)

    Islam, Muhammad Faysal

    2013-01-01

    Cloud computing offers the advantage of on-demand, reliable and cost efficient computing solutions without the capital investment and management resources to build and maintain in-house data centers and network infrastructures. Scalability of cloud solutions enable consumers to upgrade or downsize their services as needed. In a cloud environment,…

  14. Personalization and perceived personal relevance in computer-tailored persuasion in smoking cessation.

    Science.gov (United States)

    Dijkstra, Arie; Ballast, Karien

    2012-02-01

    In most computer-tailored interventions, the recipient's name is used to personalize the information. This is done to increase the process of persuasion but few empirical data exist that support this notion. An experimental laboratory study was conducted to test the effects of mentioning the participants name and to study whether it was related to the depth of processing in a 2 (personalization/standard) × 2 (weak/strong arguments) design. Over 120 student smokers were randomly assigned to one of the four experimental conditions in which they read smoking cessation messages offering (pre-tested) strong or weak arguments. Personalization was applied by mentioning the recipient's first name three times in the text. The intention to quit smoking was the dependent variable. Personalization increased persuasion when perceived personal relevance was high, but it decreased persuasion when perceived personal relevance was low. The effects on persuasion were only present in the case of strong arguments. Personalization is not always effective, and it may even lead to less persuasion. Therefore, this often used way to tailor messages must be applied with care. ©2011 The British Psychological Society.

  15. Fog-computing concept usage as means to enhance information and control system reliability

    Science.gov (United States)

    Melnik, E. V.; Klimenko, A. B.; Ivanov, D. Ya

    2018-05-01

    This paper focuses on the reliability issue of information and control systems (ICS). The authors propose using the elements of the fog-computing concept to enhance the reliability function. The key idea of fog-computing is to shift computations to the fog-layer of the network, and thus to decrease the workload of the communication environment and data processing components. As for ICS, workload also can be distributed among sensors, actuators and network infrastructure facilities near the sources of data. The authors simulated typical workload distribution situations for the “traditional” ICS architecture and for the one with fogcomputing concept elements usage. The paper contains some models, selected simulation results and conclusion about the prospects of the fog-computing as a means to enhance ICS reliability.

  16. Reliability-Centric Analysis of Offloaded Computation in Cooperative Wearable Applications

    Directory of Open Access Journals (Sweden)

    Aleksandr Ometov

    2017-01-01

    Full Text Available Motivated by the unprecedented penetration of mobile communications technology, this work carefully brings into perspective the challenges related to heterogeneous communications and offloaded computation operating in cases of fault-tolerant computation, computing, and caching. We specifically focus on the emerging augmented reality applications that require reliable delegation of the computing and caching functionality to proximate resource-rich devices. The corresponding mathematical model proposed in this work becomes of value to assess system-level reliability in cases where one or more nearby collaborating nodes become temporarily unavailable. Our produced analytical and simulation results corroborate the asymptotic insensitivity of the stationary reliability of the system in question (under the “fast” recovery of its elements to the type of the “repair” time distribution, thus supporting the fault-tolerant system operation.

  17. [Three dimensional CT reconstruction system on a personal computer].

    Science.gov (United States)

    Watanabe, E; Ide, T; Teramoto, A; Mayanagi, Y

    1991-03-01

    A new computer system to produce three dimensional surface image from CT scan has been invented. Although many similar systems have been already developed and reported, they are too expensive to be set up in routine clinical services because most of these systems are based on high power mini-computer systems. According to the opinion that a practical 3D-CT system should be used in daily clinical activities using only a personal computer, we have transplanted the 3D program into a personal computer working in MS-DOS (16-bit, 12 MHz). We added to the program a routine which simulates surgical dissection on the surface image. The time required to produce the surface image ranges from 40 to 90 seconds. To facilitate the simulation, we connected a 3D system with the neuronavigator. The navigator gives the position of the surgical simulation when the surgeon places the navigator tip on the patient's head thus simulating the surgical excision before the real dissection.

  18. Reliability issues related to the usage of Cloud Computing in Critical Infrastructures

    OpenAIRE

    Diez Gonzalez, Oscar Manuel; Silva Vazquez, Andrés

    2011-01-01

    The use of cloud computing is extending to all kind of systems, including the ones that are part of Critical Infrastructures, and measuring the reliability is becoming more difficult. Computing is becoming the 5th utility, in part thanks to the use of cloud services. Cloud computing is used now by all types of systems and organizations, including critical infrastructure, creating hidden inter-dependencies on both public and private cloud models. This paper investigates the use of cloud co...

  19. Using personality item characteristics to predict single-item reliability, retest reliability, and self-other agreement

    NARCIS (Netherlands)

    de Vries, Reinout Everhard; Realo, Anu; Allik, Jüri

    2016-01-01

    The use of reliability estimates is increasingly scrutinized as scholars become more aware that test–retest stability and self–other agreement provide a better approximation of the theoretical and practical usefulness of an instrument than its internal reliability. In this study, we investigate item

  20. HuRECA: Human Reliability Evaluator for Computer-based Control Room Actions

    International Nuclear Information System (INIS)

    Kim, Jae Whan; Lee, Seung Jun; Jang, Seung Cheol

    2011-01-01

    As computer-based design features such as computer-based procedures (CBP), soft controls (SCs), and integrated information systems are being adopted in main control rooms (MCR) of nuclear power plants, a human reliability analysis (HRA) method capable of dealing with the effects of these design features on human reliability is needed. From the observations of human factors engineering verification and validation experiments, we have drawn some major important characteristics on operator behaviors and design-related influencing factors (DIFs) from the perspective of human reliability. Firstly, there are new DIFs that should be considered in developing an HRA method for computer-based control rooms including especially CBP and SCs. In the case of the computer-based procedure rather than the paper-based procedure, the structural and managerial elements should be considered as important PSFs in addition to the procedural contents. In the case of the soft controllers, the so-called interface management tasks (or secondary tasks) should be reflected in the assessment of human error probability. Secondly, computer-based control rooms can provide more effective error recovery features than conventional control rooms. Major error recovery features for computer-based control rooms include the automatic logic checking function of the computer-based procedure and the information sharing feature of the general computer-based designs

  1. An analytical model for computation of reliability of waste management facilities with intermediate storages

    International Nuclear Information System (INIS)

    Kallweit, A.; Schumacher, F.

    1977-01-01

    A high reliability is called for waste management facilities within the fuel cycle of nuclear power stations which can be fulfilled by providing intermediate storage facilities and reserve capacities. In this report a model based on the theory of Markov processes is described which allows computation of reliability characteristics of waste management facilities containing intermediate storage facilities. The application of the model is demonstrated by an example. (orig.) [de

  2. Improving the reliability of nuclear reprocessing by application of computers and mathematical modelling

    International Nuclear Information System (INIS)

    Gabowitsch, E.; Trauboth, H.

    1982-01-01

    After a brief survey of the present and expected future state of nuclear energy utilization, which should demonstrate the significance of nuclear reprocessing, safety and reliability aspects of nuclear reprocessing plants (NRP) are considered. Then, the principal possibilities of modern computer technology including computer systems architecture and application-oriented software for improving the reliability and availability are outlined. In this context, two information systems being developed at the Nuclear Research Center Karlsruhe (KfK) are briefly described. For design evaluation of certain areas of a large NRP mathematical methods and computer-aided tools developed, used or being designed by KfK are discussed. In conclusion, future research to be pursued in information processing and applied mathematics in support of reliable operation of NRP's is proposed. (Auth.)

  3. Assessment of toxic metals in waste personal computers

    International Nuclear Information System (INIS)

    Kolias, Konstantinos; Hahladakis, John N.; Gidarakos, Evangelos

    2014-01-01

    Highlights: • Waste personal computers were collected and dismantled in their main parts. • Motherboards, monitors and plastic housing were examined in their metal content. • Concentrations measured were compared to the RoHS Directive, 2002/95/EC. • Pb in motherboards and funnel glass of devices released <2006 was above the limit. • Waste personal computers need to be recycled and environmentally sound managed. - Abstract: Considering the enormous production of waste personal computers nowadays, it is obvious that the study of their composition is necessary in order to regulate their management and prevent any environmental contamination caused by their inappropriate disposal. This study aimed at determining the toxic metals content of motherboards (printed circuit boards), monitor glass and monitor plastic housing of two Cathode Ray Tube (CRT) monitors, three Liquid Crystal Display (LCD) monitors, one LCD touch screen monitor and six motherboards, all of which were discarded. In addition, concentrations of chromium (Cr), cadmium (Cd), lead (Pb) and mercury (Hg) were compared with the respective limits set by the RoHS 2002/95/EC Directive, that was recently renewed by the 2012/19/EU recast, in order to verify manufacturers’ compliance with the regulation. The research included disassembly, pulverization, digestion and chemical analyses of all the aforementioned devices. The toxic metals content of all samples was determined using Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). The results demonstrated that concentrations of Pb in motherboards and funnel glass of devices with release dates before 2006, that is when the RoHS Directive came into force, exceeded the permissible limit. In general, except from Pb, higher metal concentrations were detected in motherboards in comparison with plastic housing and glass samples. Finally, the results of this work were encouraging, since concentrations of metals referred in the RoHS Directive were found in

  4. Assessment of toxic metals in waste personal computers

    Energy Technology Data Exchange (ETDEWEB)

    Kolias, Konstantinos; Hahladakis, John N., E-mail: john_chach@yahoo.gr; Gidarakos, Evangelos, E-mail: gidarako@mred.tuc.gr

    2014-08-15

    Highlights: • Waste personal computers were collected and dismantled in their main parts. • Motherboards, monitors and plastic housing were examined in their metal content. • Concentrations measured were compared to the RoHS Directive, 2002/95/EC. • Pb in motherboards and funnel glass of devices released <2006 was above the limit. • Waste personal computers need to be recycled and environmentally sound managed. - Abstract: Considering the enormous production of waste personal computers nowadays, it is obvious that the study of their composition is necessary in order to regulate their management and prevent any environmental contamination caused by their inappropriate disposal. This study aimed at determining the toxic metals content of motherboards (printed circuit boards), monitor glass and monitor plastic housing of two Cathode Ray Tube (CRT) monitors, three Liquid Crystal Display (LCD) monitors, one LCD touch screen monitor and six motherboards, all of which were discarded. In addition, concentrations of chromium (Cr), cadmium (Cd), lead (Pb) and mercury (Hg) were compared with the respective limits set by the RoHS 2002/95/EC Directive, that was recently renewed by the 2012/19/EU recast, in order to verify manufacturers’ compliance with the regulation. The research included disassembly, pulverization, digestion and chemical analyses of all the aforementioned devices. The toxic metals content of all samples was determined using Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). The results demonstrated that concentrations of Pb in motherboards and funnel glass of devices with release dates before 2006, that is when the RoHS Directive came into force, exceeded the permissible limit. In general, except from Pb, higher metal concentrations were detected in motherboards in comparison with plastic housing and glass samples. Finally, the results of this work were encouraging, since concentrations of metals referred in the RoHS Directive were found in

  5. [Reliability and validity studies of Turkish translation of Eysenck Personality Questionnaire Revised-Abbreviated].

    Science.gov (United States)

    Karanci, A Nuray; Dirik, Gülay; Yorulmaz, Orçun

    2007-01-01

    The aim of the present study was to examine the reliability and the validity of the Turkish translation of the Eysneck Personality Questionnaire Revised-abbreviated Form (EPQR-A) (Francis et al., 1992), which consists of 24 items that assess neuroticism, extraversion, psychoticism, and lying. The questionnaire was first translated into Turkish and then back translated. Subsequently, it was administered to 756 students from 4 different universities. The Fear Survey Inventory-III (FSI-III), Rosenberg Self-Esteem Scales (RSES), and Egna Minnen Betraffande Uppfostran (EMBU-C) were also administered in order to assess the questionnaire's validity. The internal consistency, test-retest reliability, and validity were subsequently evaluated. Factor analysis, similar to the original scale, yielded 4 factors; the neuroticism, extraversion, psychoticism, and lie scales. Kuder-Richardson alpha coefficients for the extraversion, neuroticism, psychoticism, and lie scales were 0.78, 0.65, 0.42, and 0.64, respectively, and the test-retest reliability of the scales was 0.84, 0.82, 0.69, and 0.69, respectively. The relationships between EPQR-A-48, FSI-III, EMBU-C, and RSES were examined in order to evaluate the construct validity of the scale. Our findings support the construct validity of the questionnaire. To investigate gender differences in scores on the subscales, MANOVA was conducted. The results indicated that there was a gender difference only in the lie scale scores. Our findings largely supported the reliability and validity of the questionnaire in a Turkish student sample. The psychometric characteristics of the Turkish version of the EPQR-A were discussed in light of the relevant literature.

  6. Ensemble of different approaches for a reliable person re-identification system

    Directory of Open Access Journals (Sweden)

    Loris Nanni

    2016-07-01

    Full Text Available An ensemble of approaches for reliable person re-identification is proposed in this paper. The proposed ensemble is built combining widely used person re-identification systems using different color spaces and some variants of state-of-the-art approaches that are proposed in this paper. Different descriptors are tested, and both texture and color features are extracted from the images; then the different descriptors are compared using different distance measures (e.g., the Euclidean distance, angle, and the Jeffrey distance. To improve performance, a method based on skeleton detection, extracted from the depth map, is also applied when the depth map is available. The proposed ensemble is validated on three widely used datasets (CAVIAR4REID, IAS, and VIPeR, keeping the same parameter set of each approach constant across all tests to avoid overfitting and to demonstrate that the proposed system can be considered a general-purpose person re-identification system. Our experimental results show that the proposed system offers significant improvements over baseline approaches. The source code used for the approaches tested in this paper will be available at https://www.dei.unipd.it/node/2357 and http://robotics.dei.unipd.it/reid/.

  7. Polynomial-time computability of the edge-reliability of graphs using Gilbert's formula

    Directory of Open Access Journals (Sweden)

    Thomas J. Marlowe

    1998-01-01

    Full Text Available Reliability is an important consideration in analyzing computer and other communication networks, but current techniques are extremely limited in the classes of graphs which can be analyzed efficiently. While Gilbert's formula establishes a theoretically elegant recursive relationship between the edge reliability of a graph and the reliability of its subgraphs, naive evaluation requires consideration of all sequences of deletions of individual vertices, and for many graphs has time complexity essentially Θ (N!. We discuss a general approach which significantly reduces complexity, encoding subgraph isomorphism in a finer partition by invariants, and recursing through the set of invariants.

  8. Reliability analysis of microcomputer boards and computer based systems important to safety of nuclear plants

    International Nuclear Information System (INIS)

    Shrikhande, S.V.; Patil, V.K.; Ganesh, G.; Biswas, B.; Patil, R.K.

    2010-01-01

    Computer Based Systems (CBS) are employed in Indian nuclear plants for protection, control and monitoring purpose. For forthcoming CBS, Reactor Control Division has designed and developed a new standardized family of microcomputer boards qualified to stringent requirements of nuclear industry. These boards form the basic building blocks of CBS. Reliability analysis of these boards is being carried out using analysis package based on MIL-STD-217Plus methodology. The estimated failure rate values of these standardized microcomputer boards will be useful for reliability assessment of these systems. The paper presents reliability analysis of microcomputer boards and case study of a CBS system built using these boards. (author)

  9. Reliability and Concurrent Validity of the Narrow Path Walking Test in Persons With Multiple Sclerosis.

    Science.gov (United States)

    Rosenblum, Uri; Melzer, Itshak

    2017-01-01

    About 90% of people with multiple sclerosis (PwMS) have gait instability and 50% fall. Reliable and clinically feasible methods of gait instability assessment are needed. The study investigated the reliability and validity of the Narrow Path Walking Test (NPWT) under single-task (ST) and dual-task (DT) conditions for PwMS. Thirty PwMS performed the NPWT on 2 different occasions, a week apart. Number of Steps, Trial Time, Trial Velocity, Step Length, Number of Step Errors, Number of Cognitive Task Errors, and Number of Balance Losses were measured. Intraclass correlation coefficients (ICC2,1) were calculated from the average values of NPWT parameters. Absolute reliability was quantified from standard error of measurement (SEM) and smallest real difference (SRD). Concurrent validity of NPWT with Functional Reach Test, Four Square Step Test (FSST), 12-item Multiple Sclerosis Walking Scale (MSWS-12), and 2 Minute Walking Test (2MWT) was determined using partial correlations. Intraclass correlation coefficients (ICCs) for most NPWT parameters during ST and DT ranged from 0.46-0.94 and 0.55-0.95, respectively. The highest relative reliability was found for Number of Step Errors (ICC = 0.94 and 0.93, for ST and DT, respectively) and Trial Velocity (ICC = 0.83 and 0.86, for ST and DT, respectively). Absolute reliability was high for Number of Step Errors in ST (SEM % = 19.53%) and DT (SEM % = 18.14%) and low for Trial Velocity in ST (SEM % = 6.88%) and DT (SEM % = 7.29%). Significant correlations for Number of Step Errors and Trial Velocity were found with FSST, MSWS-12, and 2MWT. In persons with PwMS performing the NPWT, Number of Step Errors and Trial Velocity were highly reliable parameters. Based on correlations with other measures of gait instability, Number of Step Errors was the most valid parameter of dynamic balance under the conditions of our test.Video Abstract available for more insights from the authors (see Supplemental Digital Content 1, available at: http

  10. Probability of extreme interference levels computed from reliability approaches: application to transmission lines with uncertain parameters

    International Nuclear Information System (INIS)

    Larbi, M.; Besnier, P.; Pecqueux, B.

    2014-01-01

    This paper deals with the risk analysis of an EMC default using a statistical approach. It is based on reliability methods from probabilistic engineering mechanics. A computation of probability of failure (i.e. probability of exceeding a threshold) of an induced current by crosstalk is established by taking into account uncertainties on input parameters influencing levels of interference in the context of transmission lines. The study has allowed us to evaluate the probability of failure of the induced current by using reliability methods having a relative low computational cost compared to Monte Carlo simulation. (authors)

  11. Personal Computer-less (PC-less) Microcontroller Training Kit

    Science.gov (United States)

    Somantri, Y.; Wahyudin, D.; Fushilat, I.

    2018-02-01

    The need of microcontroller training kit is necessary for practical work of students of electrical engineering education. However, to use available training kit not only costly but also does not meet the need of laboratory requirements. An affordable and portable microcontroller kit could answer such problem. This paper explains the design and development of Personal Computer Less (PC-Less) Microcontroller Training Kit. It was developed based on Lattepanda processor and Arduino microcontroller as target. The training kit equipped with advanced input-output interfaces that adopted the concept of low cost and low power system. The preliminary usability testing proved this device can be used as a tool for microcontroller programming and industrial automation training. By adopting the concept of portability, the device could be operated in the rural area which electricity and computer infrastructure are limited. Furthermore, the training kit is suitable for student of electrical engineering student from university and vocational high school.

  12. Developing a personal computer based expert system for radionuclide identification

    International Nuclear Information System (INIS)

    Aarnio, P.A.; Hakulinen, T.T.

    1990-01-01

    Several expert system development tools are available for personal computers today. We have used one of the LISP-based high end tools for nearly two years in developing an expert system for identification of gamma sources. The system contains a radionuclide database of 2055 nuclides and 48000 gamma transitions with a knowledge base of about sixty rules. This application combines a LISP-based inference engine with database management and relatively heavy numerical calculations performed using C-language. The most important feature needed has been the possibility to use LISP and C together with the more advanced object oriented features of the development tool. Main difficulties have been long response times and the big amount (10-16 MB) of computer memory required

  13. Leveraging Social Computing for Personalized Crisis Communication using Social Media

    Science.gov (United States)

    Leykin, Dmitry; Aharonson-Daniel, Limor; Lahad, Mooli

    2016-01-01

    Introduction: The extensive use of social media in modern life redefines social interaction and communication. Communication plays an important role in mitigating, or exacerbating, the psychological and behavioral responses to critical incidents and disasters. As recent disasters demonstrated, people tend to converge to social media during and following emergencies. Authorities can then use this media and other computational methods to gain insights from the public, mainly to enhance situational awareness, but also to improve their communication with the public and public adherence to instructions. Methods: The current review presents a conceptual framework for studying psychological aspects of crisis and risk communication using the social media through social computing. Results: Advanced analytical tools can be integrated in the processes and objectives of crisis communication. The availability of the computational techniques can improve communication with the public by a process of Hyper-Targeted Crisis Communication. Discussion: The review suggests that using advanced computational tools for target-audience profiling and linguistic matching in social media, can facilitate more sensitive and personalized emergency communication. PMID:27092290

  14. Industrial Personal Computer based Display for Nuclear Safety System

    International Nuclear Information System (INIS)

    Kim, Ji Hyeon; Kim, Aram; Jo, Jung Hee; Kim, Ki Beom; Cheon, Sung Hyun; Cho, Joo Hyun; Sohn, Se Do; Baek, Seung Min

    2014-01-01

    The safety display of nuclear system has been classified as important to safety (SIL:Safety Integrity Level 3). These days the regulatory agencies are imposing more strict safety requirements for digital safety display system. To satisfy these requirements, it is necessary to develop a safety-critical (SIL 4) grade safety display system. This paper proposes industrial personal computer based safety display system with safety grade operating system and safety grade display methods. The description consists of three parts, the background, the safety requirements and the proposed safety display system design. The hardware platform is designed using commercially available off-the-shelf processor board with back plane bus. The operating system is customized for nuclear safety display application. The display unit is designed adopting two improvement features, i.e., one is to provide two separate processors for main computer and display device using serial communication, and the other is to use Digital Visual Interface between main computer and display device. In this case the main computer uses minimized graphic functions for safety display. The display design is at the conceptual phase, and there are several open areas to be concreted for a solid system. The main purpose of this paper is to describe and suggest a methodology to develop a safety-critical display system and the descriptions are focused on the safety requirement point of view

  15. Leveraging Social Computing for Personalized Crisis Communication using Social Media.

    Science.gov (United States)

    Leykin, Dmitry; Aharonson-Daniel, Limor; Lahad, Mooli

    2016-03-24

    The extensive use of social media in modern life redefines social interaction and communication. Communication plays an important role in mitigating, or exacerbating, the psychological and behavioral responses to critical incidents and disasters. As recent disasters demonstrated, people tend to converge to social media during and following emergencies. Authorities can then use this media and other computational methods to gain insights from the public, mainly to enhance situational awareness, but also to improve their communication with the public and public adherence to instructions. The current review presents a conceptual framework for studying psychological aspects of crisis and risk communication using the social media through social computing. Advanced analytical tools can be integrated in the processes and objectives of crisis communication. The availability of the computational techniques can improve communication with the public by a process of Hyper-Targeted Crisis Communication. The review suggests that using advanced computational tools for target-audience profiling and linguistic matching in social media, can facilitate more sensitive and personalized emergency communication.

  16. Industrial Personal Computer based Display for Nuclear Safety System

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ji Hyeon; Kim, Aram; Jo, Jung Hee; Kim, Ki Beom; Cheon, Sung Hyun; Cho, Joo Hyun; Sohn, Se Do; Baek, Seung Min [KEPCO, Youngin (Korea, Republic of)

    2014-08-15

    The safety display of nuclear system has been classified as important to safety (SIL:Safety Integrity Level 3). These days the regulatory agencies are imposing more strict safety requirements for digital safety display system. To satisfy these requirements, it is necessary to develop a safety-critical (SIL 4) grade safety display system. This paper proposes industrial personal computer based safety display system with safety grade operating system and safety grade display methods. The description consists of three parts, the background, the safety requirements and the proposed safety display system design. The hardware platform is designed using commercially available off-the-shelf processor board with back plane bus. The operating system is customized for nuclear safety display application. The display unit is designed adopting two improvement features, i.e., one is to provide two separate processors for main computer and display device using serial communication, and the other is to use Digital Visual Interface between main computer and display device. In this case the main computer uses minimized graphic functions for safety display. The display design is at the conceptual phase, and there are several open areas to be concreted for a solid system. The main purpose of this paper is to describe and suggest a methodology to develop a safety-critical display system and the descriptions are focused on the safety requirement point of view.

  17. Precision of lumbar intervertebral measurements: does a computer-assisted technique improve reliability?

    Science.gov (United States)

    Pearson, Adam M; Spratt, Kevin F; Genuario, James; McGough, William; Kosman, Katherine; Lurie, Jon; Sengupta, Dilip K

    2011-04-01

    Comparison of intra- and interobserver reliability of digitized manual and computer-assisted intervertebral motion measurements and classification of "instability." To determine if computer-assisted measurement of lumbar intervertebral motion on flexion-extension radiographs improves reliability compared with digitized manual measurements. Many studies have questioned the reliability of manual intervertebral measurements, although few have compared the reliability of computer-assisted and manual measurements on lumbar flexion-extension radiographs. Intervertebral rotation, anterior-posterior (AP) translation, and change in anterior and posterior disc height were measured with a digitized manual technique by three physicians and by three other observers using computer-assisted quantitative motion analysis (QMA) software. Each observer measured 30 sets of digital flexion-extension radiographs (L1-S1) twice. Shrout-Fleiss intraclass correlation coefficients for intra- and interobserver reliabilities were computed. The stability of each level was also classified (instability defined as >4 mm AP translation or 10° rotation), and the intra- and interobserver reliabilities of the two methods were compared using adjusted percent agreement (APA). Intraobserver reliability intraclass correlation coefficients were substantially higher for the QMA technique THAN the digitized manual technique across all measurements: rotation 0.997 versus 0.870, AP translation 0.959 versus 0.557, change in anterior disc height 0.962 versus 0.770, and change in posterior disc height 0.951 versus 0.283. The same pattern was observed for interobserver reliability (rotation 0.962 vs. 0.693, AP translation 0.862 vs. 0.151, change in anterior disc height 0.862 vs. 0.373, and change in posterior disc height 0.730 vs. 0.300). The QMA technique was also more reliable for the classification of "instability." Intraobserver APAs ranged from 87 to 97% for QMA versus 60% to 73% for digitized manual

  18. The computer vision in the service of safety and reliability in steam generators inspection services

    International Nuclear Information System (INIS)

    Pineiro Fernandez, P.; Garcia Bueno, A.; Cabrera Jordan, E.

    2012-01-01

    The actual computational vision has matured very quickly in the last ten years by facilitating new developments in various areas of nuclear application allowing to automate and simplify processes and tasks, instead or in collaboration with the people and equipment efficiently. The current computer vision (more appropriate than the artificial vision concept) provides great possibilities of also improving in terms of the reliability and safety of NPPS inspection systems.

  19. Optimal reliability allocation for large software projects through soft computing techniques

    DEFF Research Database (Denmark)

    Madsen, Henrik; Albeanu, Grigore; Popentiu-Vladicescu, Florin

    2012-01-01

    or maximizing the system reliability subject to budget constraints. These kinds of optimization problems were considered both in deterministic and stochastic frameworks in literature. Recently, the intuitionistic-fuzzy optimization approach was considered as a soft computing successful modelling approach....... Firstly, a review on existing soft computing approaches to optimization is given. The main section extends the results considering self-organizing migrating algorithms for solving intuitionistic-fuzzy optimization problems attached to complex fault-tolerant software architectures which proved...

  20. COMPUTATION FORMAT computer codes X4TOC4 and PLOTC4. Implementing and Testing on a Personal Computer

    International Nuclear Information System (INIS)

    McLaughlin, P.K.

    1987-05-01

    This document describes the contents of the diskette containing the COMPUTATION FORMAT codes X4TOC4 and PLOTC4 by D.E. Cullen, and example data for use in implementing and testing these codes on a Personal Computer of the type IBM-PC/AT. Upon request the codes are available from the IAEA Nuclear Data Section, free of charge, on a single diskette. (author)

  1. Sixties Counterculture and the Personal Computer (What the Dormouse Said: How the Sixties Counterculture Shaped the Personal Computer Industry)

    International Nuclear Information System (INIS)

    Markoff, John

    2006-01-01

    The Internet is arguably the largest accumulation of information in one place, yet its own beginnings remain largely undocumented. In researching his recent book, John Markoff collected oral histories from many of the Stanford-area researchers whose technological inventions defined the both modern internet and personal computer. In his talk, Markoff will explore the role that the counterculture and anti war movements of the 1960s and 1970s played in the work of these researchers as they created what would later be called the 'world's largest legal accumulation of wealth.'

  2. Polynomial-time computability of the edge-reliability of graphs using Gilbert's formula

    Directory of Open Access Journals (Sweden)

    Marlowe Thomas J.

    1998-01-01

    Full Text Available Reliability is an important consideration in analyzing computer and other communication networks, but current techniques are extremely limited in the classes of graphs which can be analyzed efficiently. While Gilbert's formula establishes a theoretically elegant recursive relationship between the edge reliability of a graph and the reliability of its subgraphs, naive evaluation requires consideration of all sequences of deletions of individual vertices, and for many graphs has time complexity essentially Θ (N!. We discuss a general approach which significantly reduces complexity, encoding subgraph isomorphism in a finer partition by invariants, and recursing through the set of invariants. We illustrate this approach using threshhold graphs, and show that any computation of reliability using Gilbert's formula will be polynomial-time if and only if the number of invariants considered is polynomial; we then show families of graphs with polynomial-time, and non-polynomial reliability computation, and show that these encompass most previously known results. We then codify our approach to indicate how it can be used for other classes of graphs, and suggest several classes to which the technique can be applied.

  3. Reliable multicast for the Grid: a case study in experimental computer science.

    Science.gov (United States)

    Nekovee, Maziar; Barcellos, Marinho P; Daw, Michael

    2005-08-15

    In its simplest form, multicast communication is the process of sending data packets from a source to multiple destinations in the same logical multicast group. IP multicast allows the efficient transport of data through wide-area networks, and its potentially great value for the Grid has been highlighted recently by a number of research groups. In this paper, we focus on the use of IP multicast in Grid applications, which require high-throughput reliable multicast. These include Grid-enabled computational steering and collaborative visualization applications, and wide-area distributed computing. We describe the results of our extensive evaluation studies of state-of-the-art reliable-multicast protocols, which were performed on the UK's high-speed academic networks. Based on these studies, we examine the ability of current reliable multicast technology to meet the Grid's requirements and discuss future directions.

  4. Characteristics of multiprocessing MCNP5 on small personal computer clusters

    International Nuclear Information System (INIS)

    Robinson, S M; Mc Conn, R J Jr; Pagh, R T; Schweppe, J E; Siciliano, E R

    2006-01-01

    The feasibility and efficiency of performing MCNP5 calculations with a small, heterogeneous computing cluster built from Microsoft ( R) Windows TM personal computers (PC) are explored. The performance increases that may be expected with such clusters are estimated for cases that typify general radiation-shielding calculations. Our results show that the speed increase from additional slave PCs is nearly linear up to 10 processors. Guidance is given as to the specific advantages of changing various parameters present in the system. Implementing load balancing, and reducing the overhead from the MCNP rendezvous mechanism add to heterogeneous cluster efficiency. Hyper-threading technology and matching the total number of slave processes to the total number of logical processors also yield modest speed increases in the range below 7 processors. Because of the ease of acquisition of heterogeneous desktop computers, and the peak in efficiency at the level of a few physical processors, a strong case is made for the use of small clusters as a tool for producing MCNP5 calculations rapidly, and detailed instructions for constructing such clusters are provided

  5. Multi channel analyzer system addible to personal computer

    International Nuclear Information System (INIS)

    Ramirez J, F.J.; Garcia R, R.; Ramirez N, R.; Torres B, M.A.

    1996-01-01

    It has been developed a Multichannel analyzer system which was added to personal computer of 4096 channels for its use, in nuclear radiations matters, such as X-ray fluorescence analysis, Neutron activation analysis, etc. in that is interesting to know the radiation energy distribution. This system has three modules; a Digital analogical converter of 12 bits, fast (total conversion time of 6 μ s) that use a successive approximation technique with linearity correction by the gliding rule method. A digital card with microprocessor that is useful as an interface with the computer for the acquisition, data storage and the process control. A computer program with extensive use of graphics, friendly with the user in order to facilitate its utilization, also with the option to find peaks, an expansion of an interesting area, information storage in compatible format with spectra analysis programs, etc. Twenty five units of this system have been constructed which all of they were distributed to the ARCAL Member countries and the other 10 units were distributed in the National Institute of Nuclear Research. On the other hand, it has been able to find other applications where the information can be converted to pulses and the interest variable is represented by the pulse amplitude. (Author)

  6. Test-retest reliability and comparability of paper and computer questionnaires for the Finnish version of the Tampa Scale of Kinesiophobia.

    Science.gov (United States)

    Koho, P; Aho, S; Kautiainen, H; Pohjolainen, T; Hurri, H

    2014-12-01

    To estimate the internal consistency, test-retest reliability and comparability of paper and computer versions of the Finnish version of the Tampa Scale of Kinesiophobia (TSK-FIN) among patients with chronic pain. In addition, patients' personal experiences of completing both versions of the TSK-FIN and preferences between these two methods of data collection were studied. Test-retest reliability study. Paper and computer versions of the TSK-FIN were completed twice on two consecutive days. The sample comprised 94 consecutive patients with chronic musculoskeletal pain participating in a pain management or individual rehabilitation programme. The group rehabilitation design consisted of physical and functional exercises, evaluation of the social situation, psychological assessment of pain-related stress factors, and personal pain management training in order to regain overall function and mitigate the inconvenience of pain and fear-avoidance behaviour. The mean TSK-FIN score was 37.1 [standard deviation (SD) 8.1] for the computer version and 35.3 (SD 7.9) for the paper version. The mean difference between the two versions was 1.9 (95% confidence interval 0.8 to 2.9). Test-retest reliability was 0.89 for the paper version and 0.88 for the computer version. Internal consistency was considered to be good for both versions. The intraclass correlation coefficient for comparability was 0.77 (95% confidence interval 0.66 to 0.85), indicating substantial reliability between the two methods. Both versions of the TSK-FIN demonstrated substantial intertest reliability, good test-retest reliability, good internal consistency and acceptable limits of agreement, suggesting their suitability for clinical use. However, subjects tended to score higher when using the computer version. As such, in an ideal situation, data should be collected in a similar manner throughout the course of rehabilitation or clinical research. Copyright © 2014 Chartered Society of Physiotherapy. Published

  7. Development of personnel exposure management system with personal computer

    International Nuclear Information System (INIS)

    Yamato, Ichiro; Yamamoto, Toshiki

    1992-01-01

    In nuclear power plants, large scale personnel exposure management systems have been developed and established by utilities. Though being common in the base, the implementations are specific by plants. Contractors must control their workers' exposures by their own methods and systems. To comply with the utilities' parental systems, contractors' systems tend to differ by plants, thus make it difficult for contractors to design a standard system that is common to all relevant plants. Circumstances being as such, however, we have developed a system which is applicable to various customer utilities with minimal variations, using personal computers with database management and data communication softwares, with relatively low cost. We hope that this system will develop to the standard model for all Japanese contractors' personnel exposure management systems. (author)

  8. A personal computer based console monitor for a TRIGA reactor

    International Nuclear Information System (INIS)

    Rieke, Phillip E.; Hood, William E.; Razvi, Junaid

    1990-01-01

    Numerous improvements have been made to the Mark F facility to provide a minimum reactor down time, giving a high reactor availability. A program was undertaken to enhance the monitoring capabilities of the instrumentation and control system on this reactor. To that end, a personal computer based console monitoring system has been developed, installed in the control room and is operational to provide real-time monitoring and display of a variety of reactor operating parameters. This system is based on commercially available hardware and an applications software package developed internally at the GA facility. It has (a) assisted the operator in controlling reactor parameters to maintain the high degree of power stability required during extended runs with thermionic devices in-core, and (b) provided data trending and archiving capabilities on all monitored channels to allow a post-mortem analysis to be performed on any of the monitored parameters

  9. Some neutronics and thermal-hydraulics codes for reactor analysis using personal computers

    International Nuclear Information System (INIS)

    Woodruff, W.L.

    1990-01-01

    Some neutronics and thermal-hydraulics codes formerly available only for main frame computers may now be run on personal computers. Brief descriptions of the codes are provided. Running times for some of the codes are compared for an assortment of personal and main frame computers. With some limitations in detail, personal computer versions of the codes can be used to solve many problems of interest in reactor analyses at very modest costs. 11 refs., 4 tabs

  10. RSAM: An enhanced architecture for achieving web services reliability in mobile cloud computing

    Directory of Open Access Journals (Sweden)

    Amr S. Abdelfattah

    2018-04-01

    Full Text Available The evolution of the mobile landscape is coupled with the ubiquitous nature of the internet with its intermittent wireless connectivity and the web services. Achieving the web service reliability results in low communication overhead and retrieving the appropriate response. The middleware approach (MA is highly tended to achieve the web service reliability. This paper proposes a Reliable Service Architecture using Middleware (RSAM that achieves the reliable web services consumption. The enhanced architecture focuses on ensuring and tracking the request execution under the communication limitations and service temporal unavailability. It considers the most measurement factors including: request size, response size, and consuming time. We conducted experiments to compare the enhanced architecture with the traditional one. In these experiments, we covered several cases to prove the achievement of reliability. Results also show that the request size was found to be constant, the response size is identical to the traditional architecture, and the increase in the consuming time was less than 5% of the transaction time with the different response sizes. Keywords: Reliable web service, Middleware architecture, Mobile cloud computing

  11. A dual-parameter multichannel analyzer using a personal computer

    International Nuclear Information System (INIS)

    Akimoto, T.; Murai, I.; Chaki, S.; Ogawa, Y.; Shoji, I.

    1989-01-01

    The design of a practical system for measuring two-parameter signals is reported. To obtain constantly changing energy spectra of nuclear reactor assemblies due to repeated insertion of pulsed neutron sources, the simultaneous acquisition of time and energy data are needed. A computer-based dual-parameter multichannel pulse-height analyzer (MCA) has been developed; it employs a personal computer, two analog-to-digital converters (ADC's), and a parallel interface board for handling these signals. The system showed excellent performance characteristics with a minimum data processing time of about 14 μs; a maximum conversion gain of 2 18 channels (for example, 512 x 512 ch); a count capacity of 2 32 -1/ch(2 16 -1/ch at 512 x 512 ch); and the time required for graphic display of approximately 3 s/2 16 dots (contour display) or about 0.1 s/(2 16 /16) dots (isometric display). Large data arrays were handled dynamically with a segment register. The data processing speed was improved by transferring the data from the ADC to the central processing unit (CPU) in 16-bit words and simultaneously reading the status flag and the data. The graphic display process was speeded up by writing the data bit corresponding to the locations directly into the graphic video random access memory (VRAM). The system is simple to operate, and by changing the memory size and coincidence resolution time by software operations, it is highly flexible

  12. Validity and reliability of the 6 minute walk in persons with fibromyalgia.

    Science.gov (United States)

    King, S; Wessel, J; Bhambhani, Y; Maikala, R; Sholter, D; Maksymowych, W

    1999-10-01

    To assess the reliability and construct validity of the 6 minute walk (6MW) in persons with fibromyalgia (FM) and to determine an equation for predicting peak oxygen consumption (pVO2) from the distance covered in 6 minutes. Ninety-six women who met the American College of Rheumatology (ACR) criteria for FM were tested on the 6MW and the Fibromyalgia Impact Questionnaire (FIQ). A subset (n = 23) were tested on a separate day for pVO2 during a symptom-limited, incremental treadmill test. Twelve subjects repeated the 6MW five times over 10 days. Heart rate and rating of perceived exertion (RPE) were recorded for each walk. Intraclass correlations were used to determine the reliability of the 6MW. Validity was examined by correlating the 6MW with pVO2 and the FIQ. Body mass index (BMI) and 6MW were independent variables in a stepwise regression to predict pVO2. A significant increase in distance occurred from Walk 1 to Walk 2 (p = 0.000) with the distance maintained on the remaining walks (p = 0.148) The correlations of the 6MW with the FIQ and pVO2 were -0.325 and 0.657, respectively. The regression equation to predict pVO2 from 6MW distance and BMI was: pVO2 (ml/kg/min) = 21.48 + (-0.4316 x BMI) + [0.0304 x distance(m)] (R = 0.76, R2 = 0.66). When using the 6MW it is necessary to conduct a practice walk, with the second walk taken as the baseline measure. It was determined from the correlations that the 6MW cannot replace the FIQ as a measure of function. The 6MW may be used as an indicator of aerobic fitness, although obtaining VO2 by means of a graded exercise test is preferable.

  13. Image viewing station for MR and SPECT : using personal computer

    International Nuclear Information System (INIS)

    Yim, Byung Il; Jeong, Eun Kee; Suh, Jin Suck; Kim, Myeong Joon

    1996-01-01

    Macro language was programmed to analyze and process on Macintosh personal computers, GEMR images digitally transferred from the MR main computer, with special interest in the interpretation of information such as patients data and imaging parameters under each image header. By this method, raw data(files) of certain patients may be digitally stored on a hard disk or CD ROM, and the quantitative analysis, interpretation and display is possible. Patients and images were randomly selected 4.X MR images were transferred through FTP using the ethernet network. 5.X and SPECT images were transferred using floppy diskettes. To process transferred images, an freely distributed software for Macintosh namely NIH Image, with its macro language, was used to import images and translate header information. To identify necessary information, a separate window named I nfo=txt , was made for each image series. MacLC, Centris650, and PowerMac6100/CD, 7100/CD, 8100/CD models with 256 color and RAM over 8Mbyte were used. Different versions of MR images and SPECT images were displayed simultaneously and a separate window named 'info-txt' was used to show all necessary information(name of the patient, unit number, date, TR, TE, FOV etc.). Additional information(diagnosis, pathologic report etc.) was stored in another text box in 'info-txt'. The size of the file for each image plane was about 149Kbytes and the images were stored in a step-like file folders. 4.X and 5.X GE Signa 1.5T images were successfully processed with Macintosh computer and NIH Image. This result may be applied to many fields and there is hope of a broader area of application with the linkage of NIH Image and a database program

  14. The Norwegian Computerized Adaptive Test of Personality Disorder-Static Form (CAT-PD-SF): Reliability, Factor Structure, and Relationships With Personality Functioning.

    Science.gov (United States)

    Thimm, Jens C

    2017-12-01

    The Computerized Adaptive Test of Personality Disorder-Static Form (CAT-PD-SF) is a self-report inventory developed to assess pathological personality traits. The current study explored the reliability and higher order factor structure of the Norwegian version of the CAT-PD-SF and the relationships between the CAT-PD traits and domains of personality functioning in an undergraduate student sample ( N = 375). In addition to the CAT-PD-SF, the short form of the Severity Indices of Personality Problems and the Brief Symptom Inventory were administered. The results showed that the Norwegian CAT-PD-SF has good score reliability. Factor analysis of the CAT-PD-SF scales indicated five superordinate factors that correspond to the trait domains of the alternative DSM-5 model for personality disorders. The CAT-PD traits were highly predictive of impaired personality functioning after controlling for psychological distress. It is concluded that the CAT-PD-SF is a promising tool for the assessment of personality disorder traits.

  15. Parallelized computation for computer simulation of electrocardiograms using personal computers with multi-core CPU and general-purpose GPU.

    Science.gov (United States)

    Shen, Wenfeng; Wei, Daming; Xu, Weimin; Zhu, Xin; Yuan, Shizhong

    2010-10-01

    Biological computations like electrocardiological modelling and simulation usually require high-performance computing environments. This paper introduces an implementation of parallel computation for computer simulation of electrocardiograms (ECGs) in a personal computer environment with an Intel CPU of Core (TM) 2 Quad Q6600 and a GPU of Geforce 8800GT, with software support by OpenMP and CUDA. It was tested in three parallelization device setups: (a) a four-core CPU without a general-purpose GPU, (b) a general-purpose GPU plus 1 core of CPU, and (c) a four-core CPU plus a general-purpose GPU. To effectively take advantage of a multi-core CPU and a general-purpose GPU, an algorithm based on load-prediction dynamic scheduling was developed and applied to setting (c). In the simulation with 1600 time steps, the speedup of the parallel computation as compared to the serial computation was 3.9 in setting (a), 16.8 in setting (b), and 20.0 in setting (c). This study demonstrates that a current PC with a multi-core CPU and a general-purpose GPU provides a good environment for parallel computations in biological modelling and simulation studies. Copyright 2010 Elsevier Ireland Ltd. All rights reserved.

  16. Easy-to-use application programs for decay heat and delayed neutron calculations on personal computers

    Energy Technology Data Exchange (ETDEWEB)

    Oyamatsu, Kazuhiro [Nagoya Univ. (Japan)

    1998-03-01

    Application programs for personal computers are developed to calculate the decay heat power and delayed neutron activity from fission products. The main programs can be used in any computers from personal computers to main frames because their sources are written in Fortran. These programs have user friendly interfaces to be used easily not only for research activities but also for educational purposes. (author)

  17. Energy Use and Power Levels in New Monitors and Personal Computers; TOPICAL

    International Nuclear Information System (INIS)

    Roberson, Judy A.; Homan, Gregory K.; Mahajan, Akshay; Nordman, Bruce; Webber, Carrie A.; Brown, Richard E.; McWhinney, Marla; Koomey, Jonathan G.

    2002-01-01

    Our research was conducted in support of the EPA ENERGY STAR Office Equipment program, whose goal is to reduce the amount of electricity consumed by office equipment in the U.S. The most energy-efficient models in each office equipment category are eligible for the ENERGY STAR label, which consumers can use to identify and select efficient products. As the efficiency of each category improves over time, the ENERGY STAR criteria need to be revised accordingly. The purpose of this study was to provide reliable data on the energy consumption of the newest personal computers and monitors that the EPA can use to evaluate revisions to current ENERGY STAR criteria as well as to improve the accuracy of ENERGY STAR program savings estimates. We report the results of measuring the power consumption and power management capabilities of a sample of new monitors and computers. These results will be used to improve estimates of program energy savings and carbon emission reductions, and to inform rev isions of the ENERGY STAR criteria for these products. Our sample consists of 35 monitors and 26 computers manufactured between July 2000 and October 2001; it includes cathode ray tube (CRT) and liquid crystal display (LCD) monitors, Macintosh and Intel-architecture computers, desktop and laptop computers, and integrated computer systems, in which power consumption of the computer and monitor cannot be measured separately. For each machine we measured power consumption when off, on, and in each low-power level. We identify trends in and opportunities to reduce power consumption in new personal computers and monitors. Our results include a trend among monitor manufacturers to provide a single very low low-power level, well below the current ENERGY STAR criteria for sleep power consumption. These very low sleep power results mean that energy consumed when monitors are off or in active use has become more important in terms of contribution to the overall unit energy consumption (UEC

  18. Reliability Assessment of Cloud Computing Platform Based on Semiquantitative Information and Evidential Reasoning

    Directory of Open Access Journals (Sweden)

    Hang Wei

    2016-01-01

    Full Text Available A reliability assessment method based on evidential reasoning (ER rule and semiquantitative information is proposed in this paper, where a new reliability assessment architecture including four aspects with both quantitative data and qualitative knowledge is established. The assessment architecture is more objective in describing complex dynamic cloud computing environment than that in traditional method. In addition, the ER rule which has good performance for multiple attribute decision making problem is employed to integrate different types of the attributes in assessment architecture, which can obtain more accurate assessment results. The assessment results of the case study in an actual cloud computing platform verify the effectiveness and the advantage of the proposed method.

  19. Virtualization of Legacy Instrumentation Control Computers for Improved Reliability, Operational Life, and Management.

    Science.gov (United States)

    Katz, Jonathan E

    2017-01-01

    Laboratories tend to be amenable environments for long-term reliable operation of scientific measurement equipment. Indeed, it is not uncommon to find equipment 5, 10, or even 20+ years old still being routinely used in labs. Unfortunately, the Achilles heel for many of these devices is the control/data acquisition computer. Often these computers run older operating systems (e.g., Windows XP) and, while they might only use standard network, USB or serial ports, they require proprietary software to be installed. Even if the original installation disks can be found, it is a burdensome process to reinstall and is fraught with "gotchas" that can derail the process-lost license keys, incompatible hardware, forgotten configuration settings, etc. If you have running legacy instrumentation, the computer is the ticking time bomb waiting to put a halt to your operation.In this chapter, I describe how to virtualize your currently running control computer. This virtualized computer "image" is easy to maintain, easy to back up and easy to redeploy. I have used this multiple times in my own lab to greatly improve the robustness of my legacy devices.After completing the steps in this chapter, you will have your original control computer as well as a virtual instance of that computer with all the software installed ready to control your hardware should your original computer ever be decommissioned.

  20. Reliable methods for computer simulation error control and a posteriori estimates

    CERN Document Server

    Neittaanmäki, P

    2004-01-01

    Recent decades have seen a very rapid success in developing numerical methods based on explicit control over approximation errors. It may be said that nowadays a new direction is forming in numerical analysis, the main goal of which is to develop methods ofreliable computations. In general, a reliable numerical method must solve two basic problems: (a) generate a sequence of approximations that converges to a solution and (b) verify the accuracy of these approximations. A computer code for such a method must consist of two respective blocks: solver and checker.In this book, we are chie

  1. Review of the reliability of Bruce 'B' RRS dual computer system

    International Nuclear Information System (INIS)

    Arsenault, J.E.; Manship, R.A.; Levan, D.G.

    1995-07-01

    The review presents an analysis of the Bruce 'B' Reactor Regulating System (RRS) Digital Control Computer (DCC) system, based on system documentation, significant event reports (SERs), question sets, and a site visit. The intent is to evaluate the reliability of the RRS DCC and to identify the possible scenarios that could lead to a serious process failure. The evaluation is based on three relatively independent analyses, which are integrated and presented in the form of Conclusions and Recommendations

  2. Reliability of Semiautomated Computational Methods for Estimating Tibiofemoral Contact Stress in the Multicenter Osteoarthritis Study

    Directory of Open Access Journals (Sweden)

    Donald D. Anderson

    2012-01-01

    Full Text Available Recent findings suggest that contact stress is a potent predictor of subsequent symptomatic osteoarthritis development in the knee. However, much larger numbers of knees (likely on the order of hundreds, if not thousands need to be reliably analyzed to achieve the statistical power necessary to clarify this relationship. This study assessed the reliability of new semiautomated computational methods for estimating contact stress in knees from large population-based cohorts. Ten knees of subjects from the Multicenter Osteoarthritis Study were included. Bone surfaces were manually segmented from sequential 1.0 Tesla magnetic resonance imaging slices by three individuals on two nonconsecutive days. Four individuals then registered the resulting bone surfaces to corresponding bone edges on weight-bearing radiographs, using a semi-automated algorithm. Discrete element analysis methods were used to estimate contact stress distributions for each knee. Segmentation and registration reliabilities (day-to-day and interrater for peak and mean medial and lateral tibiofemoral contact stress were assessed with Shrout-Fleiss intraclass correlation coefficients (ICCs. The segmentation and registration steps of the modeling approach were found to have excellent day-to-day (ICC 0.93–0.99 and good inter-rater reliability (0.84–0.97. This approach for estimating compartment-specific tibiofemoral contact stress appears to be sufficiently reliable for use in large population-based cohorts.

  3. The Score Reliability of Draw-a-Person Intellectual Ability Test (DAP: IQ) for Rural Malawi Students

    Science.gov (United States)

    Khasu, Denis S.; Williams, Thomas O., Jr.

    2016-01-01

    In this brief article, the reliability of scores for the Draw-A-Person Intellectual Ability Test for Children, Adolescents, and Adults (DAP: IQ; Reynolds & Hickman, 2004) was examined through several analyses with a sample of 147 children from rural Malawi, Africa using a Chichewa translation of instructions. Cronbach alpha coefficients for…

  4. Feasibility and reliability of the modified berg balance scale in persons with severe intellectual and visual disabilities

    NARCIS (Netherlands)

    Waninge, Aly; van Wijck, R.; Steenbergen, B.; van der Schans, Cees

    2011-01-01

    Background: The purpose of this study was to determine the feasibility and reliability of the modified Berg Balance Scale (mBBS) in persons with severe intellectual and visual disabilities (severe multiple disabilities, SMD) assigned Gross Motor Function Classification System (GMFCS) grades I and

  5. Feasibility and reliability of the modified Berg Balance Scale in persons with severe intellectual and visual disabilities

    NARCIS (Netherlands)

    Waninge, A.; van Wijck, R.; Steenbergen, B.; van der Schans, C. P.

    Background The purpose of this study was to determine the feasibility and reliability of the modified Berg Balance Scale (mBBS) in persons with severe intellectual and visual disabilities (severe multiple disabilities, SMD) assigned Gross Motor Function Classification System (GMFCS) grades I and II.

  6. Reliability analysis and computation of computer-based safety instrumentation and control used in German nuclear power plant. Final report

    International Nuclear Information System (INIS)

    Ding, Yongjian; Krause, Ulrich; Gu, Chunlei

    2014-01-01

    The trend of technological advancement in the field of safety instrumentation and control (I and C) leads to increasingly frequent use of computer-based (digital) control systems which consisting of distributed, connected bus communications computers and their functionalities are freely programmable by qualified software. The advantages of the new I and C system over the old I and C system with hard-wired technology are e.g. in the higher flexibility, cost-effective procurement of spare parts, higher hardware reliability (through higher integration density, intelligent self-monitoring mechanisms, etc.). On the other hand, skeptics see the new technology with the computer-based I and C a higher potential by influences of common cause failures (CCF), and the easier manipulation by sabotage (IT Security). In this joint research project funded by the Federal Ministry for Economical Affaires and Energy (BMWi) (2011-2014, FJZ 1501405) the Otto-von-Guericke-University Magdeburg and Magdeburg-Stendal University of Applied Sciences are therefore trying to develop suitable methods for the demonstration of the reliability of the new instrumentation and control systems with the focus on the investigation of CCF. This expertise of both houses shall be extended to this area and a scientific contribution to the sound reliability judgments of the digital safety I and C in domestic and foreign nuclear power plants. First, the state of science and technology will be worked out through the study of national and international standards in the field of functional safety of electrical and I and C systems and accompanying literature. On the basis of the existing nuclear Standards the deterministic requirements on the structure of the new digital I and C system will be determined. The possible methods of reliability modeling will be analyzed and compared. A suitable method called multi class binomial failure rate (MCFBR) which was successfully used in safety valve applications will be

  7. Sensory emission rates from personal computers and television sets

    DEFF Research Database (Denmark)

    Wargocki, Pawel; Bako-Biro, Zsolt; Baginska, S.

    2003-01-01

    Sensory emissions from personal computers (PCs), PC monitors + PC towers, and television sets (TVs) having been in operation for 50, 400 and 600 h were assessed by a panel of 48 subjects. One brand of PC tower and four brands of PC monitors were tested. Within each brand, cathode-ray tube (CRT......) and thin-flat-transistor (TFT) monitors were selected. Two brands of TVs were tested. All brands are prevalent on the world market. The assessments were conducted in low-polluting 40 m3 test offices ventilated with a constant outdoor air change rate of 1.3 ± 0.2 h–1 corresponding to 7 L/s per PC or TV...... with two units placed at a time in the test offices; air temperature was controlled at 22 ± 0.1°C and relative humidity at 41 ± 0.5%. The subjects entered the offices individually and immediately assessed the air quality. They did not see the PCs or TVs that were placed behind a screen and were...

  8. Implementasi Penggunaan Smartphone Android untuk Control PC (Personal Computer

    Directory of Open Access Journals (Sweden)

    Imam Solikin

    2018-05-01

    Full Text Available The purpose of this research is to simplify the control of personal computer (PC such as control pointer, keyboard control and make it easier to do the presentation by controlling the slide remotely using smartphone through wifi connections facility. The smartphone is a multimedia phone that combines PC functionality with microprocessor, memory, and built-in modem to produce smart smartphone gadgets. Problems that occur when performing a presentation such as PC control, control pointer and keyboard control for input should be close to the PC so it is less than optimal in explaining the material. The model used in implementing the use of Android Smartphone for PC control is a conceptual model consisting of several stages: potential and problems, data collection, system testing, test results, and system implementation or implementation. From the results of PC control research can be done by connecting the Smartphone with a PC via wifi network so that PC can be controlled remotely. PC control application is an application that can control PC remotely connected via wifi network connection. Benefits derived from this research make it easy to mengedalikan PC remotely such as facilitate in the percentage and control pointer and control Keyboard for input process.

  9. A fast reactor transient analysis methodology for personal computers

    International Nuclear Information System (INIS)

    Ott, K.O.

    1993-01-01

    A simplified model for a liquid-metal-cooled reactor (LMR) transient analysis, in which point kinetics as well as lumped descriptions of the heat transfer equations in all components are applied, is converted from a differential into an integral formulation. All 30 differential balance equations are implicitly solved in terms of convolution integrals. The prompt jump approximation is applied as the strong negative feedback effectively keeps the net reactivity well below prompt critical. After implicit finite differencing of the convolution integrals, the kinetics equation assumes a new form, i.e., the quadratic dynamics equation. In this integral formulation, the initial value problem of typical LMR transients can be solved with large item steps (initially 1 s, later up to 256 s). This then makes transient problems amenable to a treatment on personal computer. The resulting mathematical model forms the basis for the GW-BASIC program LMR transient calculation (LTC) program. The LTC program has also been converted to QuickBASIC. The running time for a 10-h transient overpower transient is then ∼40 to 10 s, depending on the hardware version (286, 386, or 486 with math coprocessors)

  10. Temporal digital subtraction radiography with a personal computer digital workstation

    International Nuclear Information System (INIS)

    Kircos, L.; Holt, W.; Khademi, J.

    1990-01-01

    Technique have been developed and implemented on a personal computer (PC)-based digital workstation to accomplish temporal digital subtraction radiography (TDSR). TDSR is useful in recording radiologic change over time. Thus, this technique is useful not only for monitoring chronic disease processes but also for monitoring the temporal course of interventional therapies. A PC-based digital workstation was developed on a PC386 platform with add-in hardware and software. Image acquisition, storage, and processing was accomplished using 512 x 512 x 8- or 12-bit frame grabber. Software and hardware were developed to accomplish image orientation, registration, gray scale compensation, subtraction, and enhancement. Temporal radiographs of the jaws were made in a fixed and reproducible orientation between the x-ray source and image receptor enabling TDSR. Temporal changes secondary to chronic periodontal disease, osseointegration of endosseous implants, and wound healing were demonstrated. Use of TDSR for chest imaging was also demonstrated with identification of small, subtle focal masses that were not apparent with routine viewing. The large amount of radiologic information in images of the jaws and chest may obfuscate subtle changes that TDSR seems to identify. TDSR appears to be useful as a tool to record temporal and subtle changes in radiologic images

  11. Personal Computer Based Controller For Switched Reluctance Motor Drives

    Science.gov (United States)

    Mang, X.; Krishnan, R.; Adkar, S.; Chandramouli, G.

    1987-10-01

    Th9, switched reluctance motor (SRM) has recently gained considerable attention in the variable speed drive market. Two important factors that have contributed to this are, the simplicity of construction and the possibility of developing low cost con-trollers with minimum number of switching devices in the drive circuits. This is mainly due to the state-of-art of the present digital circuits technology and the low cost of switching devices. The control of this motor drive is under research. Optimized performance of the SRM motor drive is very dependent on the integration of the controller, converter and the motor. This research on system integration involves considerable changes in the control algorithms and their implementation. A Personal computer (PC) based controller is very appropriate for this purpose. Accordingly, the present paper is concerned with the design of a PC based controller for a SRM. The PC allows for real-time microprocessor control with the possibility of on-line system parameter modifications. Software reconfiguration of this controller is easier than a hardware based controller. User friendliness is a natural consequence of such a system. Considering the low cost of PCs, this controller will offer an excellent cost-effective means of studying the control strategies for the SRM drive intop greater detail than in the past.

  12. Dose calculation for iridium-192 sources by a personal computer

    International Nuclear Information System (INIS)

    Takahashi, Kenichi; Ishigaki, Hideyo; Udagawa, Kimio; Saito, Masami; Yamaguchi, Kyoko

    1988-01-01

    Recently Ir-192 sources have been used for interstitial radiotherapy instead of Ra-226 needles. One end of Ir-192 (single-pin) is formed with circlet and implanted Ir-192 sources are not always straight line. So the authors have developed a new dose calculation system, in which the authers employed conventional method considering oblique filteration for linear source and multi-point source method for curved source. Conventionally the positions of sources in three dimensions are determined from projections of the implanted sources on orthogonal or stereo radiographs. But it is frequentry impossible to define the end of sources on account of overlap. Then the authers have devised a method to determine the positions of sources from two radiographs which were taken with arbitrary directions. For tongue cancer injuries of mandibula so frequently occur after interstitial radiotherapy that the calculation of gingival dose is necessary. The positions of the gingival line are determined from two directional radiographs too. Further the three dimensional dose distributions can be displayed on the cathod ray tube. These calculations are performed by using a personal computer because of its distinctive features such as superiority in cost performance and flexibility for development and modification of programs. (author)

  13. SALP-PC, a computer program for fault tree analysis on personal computers

    International Nuclear Information System (INIS)

    Contini, S.; Poucet, A.

    1987-01-01

    The paper presents the main characteristics of the SALP-PC computer code for fault tree analysis. The program has been developed in Fortran 77 on an Olivetti M24 personal computer (IBM compatible) in order to reach a high degree of portability. It is composed of six processors implementing the different phases of the analysis procedure. This particular structure presents some advantages like, for instance, the restart facility and the possibility to develop an event tree analysis code. The set of allowed logical operators, i.e. AND, OR, NOT, K/N, XOR, INH, together with the possibility to define boundary conditions, make the SALP-PC code a powerful tool for risk assessment. (orig.)

  14. Sigma: computer vision in the service of safety and reliability in the inspection services

    International Nuclear Information System (INIS)

    Pineiro, P. J.; Mendez, M.; Garcia, A.; Cabrera, E.; Regidor, J. J.

    2012-01-01

    Vision Computing is growing very fast in the last decade with very efficient tools and algorithms. This allows new development of applications in the nuclear field providing more efficient equipment and tasks: redundant systems, vision-guided mobile robots, automated visual defects recognition, measurement, etc., In this paper Tecnatom describes a detailed example of visual computing application developed to provide secure redundant identification of the thousands of tubes existing in a power plant steam generator. some other on-going or planned visual computing projects by Tecnatom are also introduced. New possibilities of application in the inspection systems for nuclear components appear where the main objective is to maximize their reliability. (Author) 6 refs.

  15. Computing Inter-Rater Reliability for Observational Data: An Overview and Tutorial

    Directory of Open Access Journals (Sweden)

    Kevin A. Hallgren

    2012-02-01

    Full Text Available Many research designs require the assessment of inter-rater reliability (IRR to demonstrate consistency among observational ratings provided by multiple coders. However, many studies use incorrect statistical procedures, fail to fully report the information necessary to interpret their results, or do not address how IRR affects the power of their subsequent analyses for hypothesis testing. This paper provides an overview of methodological issues related to the assessment of IRR with a focus on study design, selection of appropriate statistics, and the computation, interpretation, and reporting of some commonly-used IRR statistics. Computational examples include SPSS and R syntax for computing Cohen’s kappa and intra-class correlations to assess IRR.

  16. RELIABILITY OF POSITRON EMISSION TOMOGRAPHY-COMPUTED TOMOGRAPHY IN EVALUATION OF TESTICULAR CARCINOMA PATIENTS.

    Science.gov (United States)

    Nikoletić, Katarina; Mihailović, Jasna; Matovina, Emil; Žeravica, Radmila; Srbovan, Dolores

    2015-01-01

    The study was aimed at assessing the reliability of 18F-fluorodeoxyglucose positron emission tomography-computed tomography scan in evaluation of testicular carcinoma patients. The study sample consisted of 26 scans performed in 23 patients with testicular carcinoma. According to the pathohistological finding, 14 patients had seminomas, 7 had nonseminomas and 2 patients had a mixed histological type. In 17 patients, the initial treatment was orchiectomy+chemotherapy, 2 patients had orchiectomy+chemotherapy+retroperitoneal lymph node dissection, 3 patients had orchiectomy only and one patient was treated with chemotherapy only. Abnormal computed tomography was the main cause for the oncologist to refer the patient to positron emission tomography-computed tomography scan (in 19 scans), magnetic resonance imaging abnormalities in 1 scan, high level oftumor markers in 3 and 3 scans were perforned for follow-up. Positron emission tomography-computed tomography imaging results were compared with histological results, other imaging modalities or the clinical follow-up of the patients. Positron emission tomography-computed tomography scans were positive in 6 and negative in 20 patients. In two patients, positron emission tomography-computed tomography was false positive. There were 20 negative positron emission omography-computed tomography scans perforned in 18 patients, one patient was lost for data analysis. Clinically stable disease was confirmed in 18 follow-up scans performed in 16 patients. The values of sensitivty, specificity, accuracy, and positive- and negative predictive value were 60%, 95%, 75%, 88% and 90.5%, respectively. A hgh negative predictive value obtained in our study (90.5%) suggests that there is a small possibility for a patient to have future relapse after normal positron emission tomography-computed tomography study. However, since the sensitivity and positive predictive value of the study ire rather low, there are limitations of positive

  17. The reliable solution and computation time of variable parameters logistic model

    Science.gov (United States)

    Wang, Pengfei; Pan, Xinnong

    2018-05-01

    The study investigates the reliable computation time (RCT, termed as T c) by applying a double-precision computation of a variable parameters logistic map (VPLM). Firstly, by using the proposed method, we obtain the reliable solutions for the logistic map. Secondly, we construct 10,000 samples of reliable experiments from a time-dependent non-stationary parameters VPLM and then calculate the mean T c. The results indicate that, for each different initial value, the T cs of the VPLM are generally different. However, the mean T c trends to a constant value when the sample number is large enough. The maximum, minimum, and probable distribution functions of T c are also obtained, which can help us to identify the robustness of applying a nonlinear time series theory to forecasting by using the VPLM output. In addition, the T c of the fixed parameter experiments of the logistic map is obtained, and the results suggest that this T c matches the theoretical formula-predicted value.

  18. Chest computed tomography-based scoring of thoracic sarcoidosis: Inter-rater reliability of CT abnormalities

    Energy Technology Data Exchange (ETDEWEB)

    Heuvel, D.A.V. den; Es, H.W. van; Heesewijk, J.P. van; Spee, M. [St. Antonius Hospital Nieuwegein, Department of Radiology, Nieuwegein (Netherlands); Jong, P.A. de [University Medical Center Utrecht, Department of Radiology, Utrecht (Netherlands); Zanen, P.; Grutters, J.C. [University Medical Center Utrecht, Division Heart and Lungs, Utrecht (Netherlands); St. Antonius Hospital Nieuwegein, Center of Interstitial Lung Diseases, Department of Pulmonology, Nieuwegein (Netherlands)

    2015-09-15

    To determine inter-rater reliability of sarcoidosis-related computed tomography (CT) findings that can be used for scoring of thoracic sarcoidosis. CT images of 51 patients with sarcoidosis were scored by five chest radiologists for various abnormal CT findings (22 in total) encountered in thoracic sarcoidosis. Using intra-class correlation coefficient (ICC) analysis, inter-rater reliability was analysed and reported according to the Guidelines for Reporting Reliability and Agreement Studies (GRRAS) criteria. A pre-specified sub-analysis was performed to investigate the effect of training. Scoring was trained in a distinct set of 15 scans in which all abnormal CT findings were represented. Median age of the 51 patients (36 men, 70 %) was 43 years (range 26 - 64 years). All radiographic stages were present in this group. ICC ranged from 0.91 for honeycombing to 0.11 for nodular margin (sharp versus ill-defined). The ICC was above 0.60 in 13 of the 22 abnormal findings. Sub-analysis for the best-trained observers demonstrated an ICC improvement for all abnormal findings and values above 0.60 for 16 of the 22 abnormalities. In our cohort, reliability between raters was acceptable for 16 thoracic sarcoidosis-related abnormal CT findings. (orig.)

  19. Chest computed tomography-based scoring of thoracic sarcoidosis: Inter-rater reliability of CT abnormalities

    International Nuclear Information System (INIS)

    Heuvel, D.A.V. den; Es, H.W. van; Heesewijk, J.P. van; Spee, M.; Jong, P.A. de; Zanen, P.; Grutters, J.C.

    2015-01-01

    To determine inter-rater reliability of sarcoidosis-related computed tomography (CT) findings that can be used for scoring of thoracic sarcoidosis. CT images of 51 patients with sarcoidosis were scored by five chest radiologists for various abnormal CT findings (22 in total) encountered in thoracic sarcoidosis. Using intra-class correlation coefficient (ICC) analysis, inter-rater reliability was analysed and reported according to the Guidelines for Reporting Reliability and Agreement Studies (GRRAS) criteria. A pre-specified sub-analysis was performed to investigate the effect of training. Scoring was trained in a distinct set of 15 scans in which all abnormal CT findings were represented. Median age of the 51 patients (36 men, 70 %) was 43 years (range 26 - 64 years). All radiographic stages were present in this group. ICC ranged from 0.91 for honeycombing to 0.11 for nodular margin (sharp versus ill-defined). The ICC was above 0.60 in 13 of the 22 abnormal findings. Sub-analysis for the best-trained observers demonstrated an ICC improvement for all abnormal findings and values above 0.60 for 16 of the 22 abnormalities. In our cohort, reliability between raters was acceptable for 16 thoracic sarcoidosis-related abnormal CT findings. (orig.)

  20. Multi-kanban mechanism for personal computer disassembly

    Science.gov (United States)

    Udomsawat, Gun; Gupta, Surendra M.; Kamarthi, Sagar V.

    2004-12-01

    The use of personal computers (PCs) continues to increase every year. According to a 1999 figure, 50 percent of all US households owned PCs, a figure that continues to rise every year. With continuous development of sophisticated software, PCs are becoming increasingly powerful. In addition, the price of a PC continues to steadily decline. Furthermore, the typical life of a PC in the workplace is approximately two to three years while in the home it is three to five years. As these PCs become obsolete, they are replaced and the old PCs are disposed of. It is estimated that between 14 and 20 million PCs are retired annually in the US. While 20 to 30% of the units may be resold, the others are discarded. These discards represent a significant potential source of lead for the waste stream. In some communities, waste cathode ray tubes (CRTs) represent the second largest source of lead in the waste stream after vehicular lead acid batteries. PCs are, therefore, not suitable for dumping in landfills. Besides, several components of a PC can be reused and then there are other valuable materials that can also be harvested. And with the advent of product stewardship, product recovery is the best solution for manufacturers. Disassembly line is perhaps the most suitable set up for disassembling PCs. However, planning and scheduling of disassembly on a disassembly line is complicated. In this paper, we discuss some of the complications including product arrival, demand arrival, inventory fluctuation and production control mechanisms. We then show how to overcome them by implementing a multi-kanban mechanism in the PC disassembly line setting. The multi-kanban mechanism relies on dynamic routing of kanbans according to the state of the system. We investigate the multi-kanban mechanism using simulation and demonstrate that this mechanism is superior to the traditional push system in terms of controlling the system"s inventory while maintaining a decent customer service level.

  1. Life cycle assessment study of a Chinese desktop personal computer.

    Science.gov (United States)

    Duan, Huabo; Eugster, Martin; Hischier, Roland; Streicher-Porte, Martin; Li, Jinhui

    2009-02-15

    Associated with the tremendous prosperity in world electronic information and telecommunication industry, there continues to be an increasing awareness of the environmental impacts related to the accelerating mass production, electricity use, and waste management of electronic and electric products (e-products). China's importance as both a consumer and supplier of e-products has grown at an unprecedented pace in recent decade. Hence, this paper aims to describe the application of life cycle assessment (LCA) to investigate the environmental performance of Chinese e-products from a global level. A desktop personal computer system has been selected to carry out a detailed and modular LCA which follows the ISO 14040 series. The LCA is constructed by SimaPro software version 7.0 and expressed with the Eco-indicator'99 life cycle impact assessment method. For a sensitivity analysis of the overall LCA results, the so-called CML method is used in order to estimate the influence of the choice of the assessment method on the result. Life cycle inventory information is complied by ecoinvent 1.3 databases, combined with literature and field investigations on the present Chinese situation. The established LCA study shows that that the manufacturing and the use of such devices are of the highest environmental importance. In the manufacturing of such devices, the integrated circuits (ICs) and the Liquid Crystal Display (LCD) are those parts contributing most to the impact. As no other aspects are taken into account during the use phase, the impact is due to the way how the electricity is produced. The final process steps--i.e. the end of life phase--lead to a clear environmental benefit if a formal and modern, up-to-date technical system is assumed, like here in this study.

  2. Life cycle assessment study of a Chinese desktop personal computer

    International Nuclear Information System (INIS)

    Duan Huabo; Eugster, Martin; Hischier, Roland; Streicher-Porte, Martin; Li Jinhui

    2009-01-01

    Associated with the tremendous prosperity in world electronic information and telecommunication industry, there continues to be an increasing awareness of the environmental impacts related to the accelerating mass production, electricity use, and waste management of electronic and electric products (e-products). China's importance as both a consumer and supplier of e-products has grown at an unprecedented pace in recent decade. Hence, this paper aims to describe the application of life cycle assessment (LCA) to investigate the environmental performance of Chinese e-products from a global level. A desktop personal computer system has been selected to carry out a detailed and modular LCA which follows the ISO 14040 series. The LCA is constructed by SimaPro software version 7.0 and expressed with the Eco-indicator'99 life cycle impact assessment method. For a sensitivity analysis of the overall LCA results, the so-called CML method is used in order to estimate the influence of the choice of the assessment method on the result. Life cycle inventory information is complied by ecoinvent 1.3 databases, combined with literature and field investigations on the present Chinese situation. The established LCA study shows that that the manufacturing and the use of such devices are of the highest environmental importance. In the manufacturing of such devices, the integrated circuits (ICs) and the Liquid Crystal Display (LCD) are those parts contributing most to the impact. As no other aspects are taken into account during the use phase, the impact is due to the way how the electricity is produced. The final process steps - i.e. the end of life phase - lead to a clear environmental benefit if a formal and modern, up-to-date technical system is assumed, like here in this study

  3. Computational area measurement of orbital floor fractures: Reliability, accuracy and rapidity

    International Nuclear Information System (INIS)

    Schouman, Thomas; Courvoisier, Delphine S.; Imholz, Benoit; Van Issum, Christopher; Scolozzi, Paolo

    2012-01-01

    Objective: To evaluate the reliability, accuracy and rapidity of a specific computational method for assessing the orbital floor fracture area on a CT scan. Method: A computer assessment of the area of the fracture, as well as that of the total orbital floor, was determined on CT scans taken from ten patients. The ratio of the fracture's area to the orbital floor area was also calculated. The test–retest precision of measurement calculations was estimated using the Intraclass Correlation Coefficient (ICC) and Dahlberg's formula to assess the agreement across observers and across measures. The time needed for the complete assessment was also evaluated. Results: The Intraclass Correlation Coefficient across observers was 0.92 [0.85;0.96], and the precision of the measures across observers was 4.9%, according to Dahlberg's formula .The mean time needed to make one measurement was 2 min and 39 s (range, 1 min and 32 s to 4 min and 37 s). Conclusion: This study demonstrated that (1) the area of the orbital floor fracture can be rapidly and reliably assessed by using a specific computer system directly on CT scan images; (2) this method has the potential of being routinely used to standardize the post-traumatic evaluation of orbital fractures

  4. How to effectively compute the reliability of a thermal-hydraulic nuclear passive system

    International Nuclear Information System (INIS)

    Zio, E.; Pedroni, N.

    2011-01-01

    Research highlights: → Optimized LS is the preferred choice for failure probability estimation. → Two alternative options are suggested for uncertainty and sensitivity analyses. → SS for simulation codes requiring seconds or minutes to run. → Regression models (e.g., ANNs) for simulation codes requiring hours or days to run. - Abstract: The computation of the reliability of a thermal-hydraulic (T-H) passive system of a nuclear power plant can be obtained by (i) Monte Carlo (MC) sampling the uncertainties of the system model and parameters, (ii) computing, for each sample, the system response by a mechanistic T-H code and (iii) comparing the system response with pre-established safety thresholds, which define the success or failure of the safety function. The computational effort involved can be prohibitive because of the large number of (typically long) T-H code simulations that must be performed (one for each sample) for the statistical estimation of the probability of success or failure. The objective of this work is to provide operative guidelines to effectively handle the computation of the reliability of a nuclear passive system. Two directions of computation efficiency are considered: from one side, efficient Monte Carlo Simulation (MCS) techniques are indicated as a means to performing robust estimations with a limited number of samples: in particular, the Subset Simulation (SS) and Line Sampling (LS) methods are identified as most valuable; from the other side, fast-running, surrogate regression models (also called response surfaces or meta-models) are indicated as a valid replacement of the long-running T-H model codes: in particular, the use of bootstrapped Artificial Neural Networks (ANNs) is shown to have interesting potentials, including for uncertainty propagation. The recommendations drawn are supported by the results obtained in an illustrative application of literature.

  5. Personalized Computer-Assisted Mathematics Problem-Solving Program and Its Impact on Taiwanese Students

    Science.gov (United States)

    Chen, Chiu-Jung; Liu, Pei-Lin

    2007-01-01

    This study evaluated the effects of a personalized computer-assisted mathematics problem-solving program on the performance and attitude of Taiwanese fourth grade students. The purpose of this study was to determine whether the personalized computer-assisted program improved student performance and attitude over the nonpersonalized program.…

  6. Providing disabled persons in developing countries access to computer games through a novel gaming input device

    CSIR Research Space (South Africa)

    Smith, Andrew C

    2011-01-01

    Full Text Available A novel input device is presented for use with a personal computer by persons with physical disabilities who would otherwise not be able to enjoy computer gaming. This device is simple to manufacture and low in cost. A gaming application...

  7. MULTI - multifunctional interface of the IBM XT and AT type personal computers

    International Nuclear Information System (INIS)

    Gross, T.; Kalavski, D.; Rubin, D.; Tulaev, A.B.; Tumanov, A.V.

    1988-01-01

    MULTI multifunctional interface which enables to solve problems of personal computer connestion with physical equipment without application of intermediate buses is described. Parallel 32-digit bidirectional 1/10 register and buffered bus of personal computer represent MULTI base. Ways of MULTI application are described

  8. 76 FR 71980 - SEDASYS Computer-Assisted Personalized Sedation System; Ethicon Endo-Surgery, Incorporated's...

    Science.gov (United States)

    2011-11-21

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-P-0176] SEDASYS Computer-Assisted Personalized Sedation System; Ethicon Endo-Surgery, Incorporated's Petition for... SEDASYS computer-assisted personalized sedation system (SEDASYS) submitted by Ethicon Endo-Surgery Inc...

  9. The timed "up and go" test : Reliability and validity in persons with unilateral lower limb amputation

    NARCIS (Netherlands)

    Schoppen, Tanneke; Boonstra, Antje; Groothoff, JW; de Vries, J; Goeken, LNH; Eisma, Willem

    Objective: To determine the interrater and interrater reliability and the validity of the Timed "up and go" test as a measure for physical mobility in elderly patients with an amputation of the lower extremity. Design: To test interrater reliability, the test was performed for two observers at

  10. Reliability of real-time computing with radiation data feedback at accidental release

    International Nuclear Information System (INIS)

    Deme, S.; Feher, I.; Lang, E.

    1989-07-01

    At present, the computing method normalized for the telemetric data represents the primary information for deciding on any necessary countermeasures in case of a nuclear reactor accident. The reliability of the results, however, are influenced by the choice of certain parameters that can not be determined by direct methods. Improperly chosen diffusion parameters would distort the determination of environmental radiation parameters normalized on the basis of the measurements ( 131 I activity concentration, gamma dose rate) at points lying at a given distance from the measuring stations. Numerical examples for the uncertainties due to the above factors are analyzed. (author) 4 refs.; 14 figs

  11. Personalized Opportunistic Computing for CMS at Large Scale

    CERN Multimedia

    CERN. Geneva

    2015-01-01

    **Douglas Thain** is an Associate Professor of Computer Science and Engineering at the University of Notre Dame, where he designs large scale distributed computing systems to power the needs of advanced science and...

  12. Towards personalized feedback in educational computer games for children

    NARCIS (Netherlands)

    Vasilyeva, E.; Uskov, V.

    2007-01-01

    Educational games as well as other computer games become an important part of children’s life and modern education. Feedback that is provided during a game to a child plays a significant role in computer games in general. In the context of educational computer games being developed for children game

  13. Reliability Lessons Learned From GPU Experience With The Titan Supercomputer at Oak Ridge Leadership Computing Facility

    Energy Technology Data Exchange (ETDEWEB)

    Gallarno, George [Christian Brothers University; Rogers, James H [ORNL; Maxwell, Don E [ORNL

    2015-01-01

    The high computational capability of graphics processing units (GPUs) is enabling and driving the scientific discovery process at large-scale. The world s second fastest supercomputer for open science, Titan, has more than 18,000 GPUs that computational scientists use to perform scientific simu- lations and data analysis. Understanding of GPU reliability characteristics, however, is still in its nascent stage since GPUs have only recently been deployed at large-scale. This paper presents a detailed study of GPU errors and their impact on system operations and applications, describing experiences with the 18,688 GPUs on the Titan supercom- puter as well as lessons learned in the process of efficient operation of GPUs at scale. These experiences are helpful to HPC sites which already have large-scale GPU clusters or plan to deploy GPUs in the future.

  14. Computer-based personality judgments are more accurate than those made by humans

    Science.gov (United States)

    Youyou, Wu; Kosinski, Michal; Stillwell, David

    2015-01-01

    Judging others’ personalities is an essential skill in successful social living, as personality is a key driver behind people’s interactions, behaviors, and emotions. Although accurate personality judgments stem from social-cognitive skills, developments in machine learning show that computer models can also make valid judgments. This study compares the accuracy of human and computer-based personality judgments, using a sample of 86,220 volunteers who completed a 100-item personality questionnaire. We show that (i) computer predictions based on a generic digital footprint (Facebook Likes) are more accurate (r = 0.56) than those made by the participants’ Facebook friends using a personality questionnaire (r = 0.49); (ii) computer models show higher interjudge agreement; and (iii) computer personality judgments have higher external validity when predicting life outcomes such as substance use, political attitudes, and physical health; for some outcomes, they even outperform the self-rated personality scores. Computers outpacing humans in personality judgment presents significant opportunities and challenges in the areas of psychological assessment, marketing, and privacy. PMID:25583507

  15. Computer-based personality judgments are more accurate than those made by humans.

    Science.gov (United States)

    Youyou, Wu; Kosinski, Michal; Stillwell, David

    2015-01-27

    Judging others' personalities is an essential skill in successful social living, as personality is a key driver behind people's interactions, behaviors, and emotions. Although accurate personality judgments stem from social-cognitive skills, developments in machine learning show that computer models can also make valid judgments. This study compares the accuracy of human and computer-based personality judgments, using a sample of 86,220 volunteers who completed a 100-item personality questionnaire. We show that (i) computer predictions based on a generic digital footprint (Facebook Likes) are more accurate (r = 0.56) than those made by the participants' Facebook friends using a personality questionnaire (r = 0.49); (ii) computer models show higher interjudge agreement; and (iii) computer personality judgments have higher external validity when predicting life outcomes such as substance use, political attitudes, and physical health; for some outcomes, they even outperform the self-rated personality scores. Computers outpacing humans in personality judgment presents significant opportunities and challenges in the areas of psychological assessment, marketing, and privacy.

  16. Modeling Message Queueing Services with Reliability Guarantee in Cloud Computing Environment Using Colored Petri Nets

    Directory of Open Access Journals (Sweden)

    Jing Li

    2015-01-01

    Full Text Available Motivated by the need for loosely coupled and asynchronous dissemination of information, message queues are widely used in large-scale application areas. With the advent of virtualization technology, cloud-based message queueing services (CMQSs with distributed computing and storage are widely adopted to improve availability, scalability, and reliability; however, a critical issue is its performance and the quality of service (QoS. While numerous approaches evaluating system performance are available, there is no modeling approach for estimating and analyzing the performance of CMQSs. In this paper, we employ both the analytical and simulation modeling to address the performance of CMQSs with reliability guarantee. We present a visibility-based modeling approach (VMA for simulation model using colored Petri nets (CPN. Our model incorporates the important features of message queueing services in the cloud such as replication, message consistency, resource virtualization, and especially the mechanism named visibility timeout which is adopted in the services to guarantee system reliability. Finally, we evaluate our model through different experiments under varied scenarios to obtain important performance metrics such as total message delivery time, waiting number, and components utilization. Our results reveal considerable insights into resource scheduling and system configuration for service providers to estimate and gain performance optimization.

  17. Design and reliability, availability, maintainability, and safety analysis of a high availability quadruple vital computer system

    Institute of Scientific and Technical Information of China (English)

    Ping TAN; Wei-ting HE; Jia LIN; Hong-ming ZHAO; Jian CHU

    2011-01-01

    With the development of high-speed railways in China,more than 2000 high-speed trains will be put into use.Safety and efficiency of railway transportation is increasingly important.We have designed a high availability quadruple vital computer (HAQVC) system based on the analysis of the architecture of the traditional double 2-out-of-2 system and 2-out-of-3 system.The HAQVC system is a system with high availability and safety,with prominent characteristics such as fire-new internal architecture,high efficiency,reliable data interaction mechanism,and operation state change mechanism.The hardware of the vital CPU is based on ARM7 with the real-time embedded safe operation system (ES-OS).The Markov modeling method is designed to evaluate the reliability,availability,maintainability,and safety (RAMS) of the system.In this paper,we demonstrate that the HAQVC system is more reliable than the all voting triple modular redundancy (AVTMR) system and double 2-out-of-2 system.Thus,the design can be used for a specific application system,such as an airplane or high-speed railway system.

  18. Measurement of transplanted pancreatic volume using computed tomography: reliability by intra- and inter-observer variability

    International Nuclear Information System (INIS)

    Lundqvist, Eva; Segelsjoe, Monica; Magnusson, Anders; Andersson, Anna; Biglarnia, Ali-Reza

    2012-01-01

    Background Unlike other solid organ transplants, pancreas allografts can undergo a substantial decrease in baseline volume after transplantation. This phenomenon has not been well characterized, as there are insufficient data on reliable and reproducible volume assessments. We hypothesized that characterization of pancreatic volume by means of computed tomography (CT) could be a useful method for clinical follow-up in pancreas transplant patients. Purpose To evaluate the feasibility and reliability of pancreatic volume assessment using CT scan in transplanted patients. Material and Methods CT examinations were performed on 21 consecutive patients undergoing pancreas transplantation. Volume measurements were carried out by two observers tracing the pancreatic contours in all slices. The observers performed the measurements twice for each patient. Differences in volume measurement were used to evaluate intra- and inter-observer variability. Results The intra-observer variability for the pancreatic volume measurements of Observers 1 and 2 was found to be in almost perfect agreement, with an intraclass correlation coefficient (ICC) of 0.90 (0.77-0.96) and 0.99 (0.98-1.0), respectively. Regarding inter-observer validity, the ICCs for the first and second measurements were 0.90 (range, 0.77-0.96) and 0.95 (range, 0.85-0.98), respectively. Conclusion CT volumetry is a reliable and reproducible method for measurement of transplanted pancreatic volume

  19. Measurement of transplanted pancreatic volume using computed tomography: reliability by intra- and inter-observer variability

    Energy Technology Data Exchange (ETDEWEB)

    Lundqvist, Eva; Segelsjoe, Monica; Magnusson, Anders [Uppsala Univ., Dept. of Radiology, Oncology and Radiation Science, Section of Radiology, Uppsala (Sweden)], E-mail: eva.lundqvist.8954@student.uu.se; Andersson, Anna; Biglarnia, Ali-Reza [Dept. of Surgical Sciences, Section of Transplantation Surgery, Uppsala Univ. Hospital, Uppsala (Sweden)

    2012-11-15

    Background Unlike other solid organ transplants, pancreas allografts can undergo a substantial decrease in baseline volume after transplantation. This phenomenon has not been well characterized, as there are insufficient data on reliable and reproducible volume assessments. We hypothesized that characterization of pancreatic volume by means of computed tomography (CT) could be a useful method for clinical follow-up in pancreas transplant patients. Purpose To evaluate the feasibility and reliability of pancreatic volume assessment using CT scan in transplanted patients. Material and Methods CT examinations were performed on 21 consecutive patients undergoing pancreas transplantation. Volume measurements were carried out by two observers tracing the pancreatic contours in all slices. The observers performed the measurements twice for each patient. Differences in volume measurement were used to evaluate intra- and inter-observer variability. Results The intra-observer variability for the pancreatic volume measurements of Observers 1 and 2 was found to be in almost perfect agreement, with an intraclass correlation coefficient (ICC) of 0.90 (0.77-0.96) and 0.99 (0.98-1.0), respectively. Regarding inter-observer validity, the ICCs for the first and second measurements were 0.90 (range, 0.77-0.96) and 0.95 (range, 0.85-0.98), respectively. Conclusion CT volumetry is a reliable and reproducible method for measurement of transplanted pancreatic volume.

  20. Use of Soft Computing Technologies for a Qualitative and Reliable Engine Control System for Propulsion Systems

    Science.gov (United States)

    Trevino, Luis; Brown, Terry; Crumbley, R. T. (Technical Monitor)

    2001-01-01

    The problem to be addressed in this paper is to explore how the use of Soft Computing Technologies (SCT) could be employed to improve overall vehicle system safety, reliability, and rocket engine performance by development of a qualitative and reliable engine control system (QRECS). Specifically, this will be addressed by enhancing rocket engine control using SCT, innovative data mining tools, and sound software engineering practices used in Marshall's Flight Software Group (FSG). The principle goals for addressing the issue of quality are to improve software management, software development time, software maintenance, processor execution, fault tolerance and mitigation, and nonlinear control in power level transitions. The intent is not to discuss any shortcomings of existing engine control methodologies, but to provide alternative design choices for control, implementation, performance, and sustaining engineering, all relative to addressing the issue of reliability. The approaches outlined in this paper will require knowledge in the fields of rocket engine propulsion (system level), software engineering for embedded flight software systems, and soft computing technologies (i.e., neural networks, fuzzy logic, data mining, and Bayesian belief networks); some of which are briefed in this paper. For this effort, the targeted demonstration rocket engine testbed is the MC-1 engine (formerly FASTRAC) which is simulated with hardware and software in the Marshall Avionics & Software Testbed (MAST) laboratory that currently resides at NASA's Marshall Space Flight Center, building 4476, and is managed by the Avionics Department. A brief plan of action for design, development, implementation, and testing a Phase One effort for QRECS is given, along with expected results. Phase One will focus on development of a Smart Start Engine Module and a Mainstage Engine Module for proper engine start and mainstage engine operations. The overall intent is to demonstrate that by

  1. Reliability of Lyapunov characteristic exponents computed by the two-particle method

    Science.gov (United States)

    Mei, Lijie; Huang, Li

    2018-03-01

    For highly complex problems, such as the post-Newtonian formulation of compact binaries, the two-particle method may be a better, or even the only, choice to compute the Lyapunov characteristic exponent (LCE). This method avoids the complex calculations of variational equations compared with the variational method. However, the two-particle method sometimes provides spurious estimates to LCEs. In this paper, we first analyze the equivalence in the definition of LCE between the variational and two-particle methods for Hamiltonian systems. Then, we develop a criterion to determine the reliability of LCEs computed by the two-particle method by considering the magnitude of the initial tangent (or separation) vector ξ0 (or δ0), renormalization time interval τ, machine precision ε, and global truncation error ɛT. The reliable Lyapunov characteristic indicators estimated by the two-particle method form a V-shaped region, which is restricted by d0, ε, and ɛT. Finally, the numerical experiments with the Hénon-Heiles system, the spinning compact binaries, and the post-Newtonian circular restricted three-body problem strongly support the theoretical results.

  2. Reliability of computed tomography measurements in assessment of thigh muscle cross-sectional area and attenuation

    International Nuclear Information System (INIS)

    Strandberg, Sören; Wretling, Marie-Louise; Wredmark, Torsten; Shalabi, Adel

    2010-01-01

    Advancement in technology of computer tomography (CT) and introduction of new medical imaging softwares enables easy and rapid assessment of muscle cross-sectional area (CSA) and attenuation. Before using these techniques in clinical studies there is a need for evaluation of the reliability of the measurements. The purpose of the study was to evaluate the inter- and intra-observer reliability of ImageJ in measuring thigh muscles CSA and attenuation in patients with anterior cruciate ligament (ACL) injury by computer tomography. 31 patients from an ongoing study of rehabilitation and muscle atrophy after ACL reconstruction were included in the study. Axial CT images with slice thickness of 10 mm at the level of 150 mm above the knee joint were analyzed by two investigators independently at two times with a minimum of 3 weeks between the two readings using NIH ImageJ. CSA and the mean attenuation of individual thigh muscles were analyzed for both legs. Mean CSA and mean attenuation values were in good agreement both when comparing the two observers and the two replicates. The inter- and intraclass correlation (ICC) was generally very high with values from 0.98 to 1.00 for all comparisons except for the area of semimembranosus. All the ICC values were significant (p < 0,001). Pearson correlation coefficients were also generally very high with values from 0.98 to 1.00 for all comparisons except for the area of semimembranosus (0.95 for intraobserver and 0.92 for interobserver). This study has presented ImageJ as a method to monitor and evaluate CSA and attenuation of different muscles in the thigh using CT-imaging. The method shows an overall excellent reliability with respect to both observer and replicate

  3. Osteochondritis dissecans of the humeral capitellum: reliability of four classification systems using radiographs and computed tomography.

    Science.gov (United States)

    Claessen, Femke M A P; van den Ende, Kimberly I M; Doornberg, Job N; Guitton, Thierry G; Eygendaal, Denise; van den Bekerom, Michel P J

    2015-10-01

    The radiographic appearance of osteochondritis dissecans (OCD) of the humeral capitellum varies according to the stage of the lesion. It is important to evaluate the stage of OCD lesion carefully to guide treatment. We compared the interobserver reliability of currently used classification systems for OCD of the humeral capitellum to identify the most reliable classification system. Thirty-two musculoskeletal radiologists and orthopaedic surgeons specialized in elbow surgery from several countries evaluated anteroposterior and lateral radiographs and corresponding computed tomography (CT) scans of 22 patients to classify the stage of OCD of the humeral capitellum according to the classification systems developed by (1) Minami, (2) Berndt and Harty, (3) Ferkel and Sgaglione, and (4) Anderson on a Web-based study platform including a Digital Imaging and Communications in Medicine viewer. Magnetic resonance imaging was not evaluated as part of this study. We measured agreement among observers using the Siegel and Castellan multirater κ. All OCD classification systems, except for Berndt and Harty, which had poor agreement among observers (κ = 0.20), had fair interobserver agreement: κ was 0.27 for the Minami, 0.23 for Anderson, and 0.22 for Ferkel and Sgaglione classifications. The Minami Classification was significantly more reliable than the other classifications (P reliable for classifying different stages of OCD of the humeral capitellum. However, it is unclear whether radiographic evidence of OCD of the humeral capitellum, as categorized by the Minami Classification, guides treatment in clinical practice as a result of this fair agreement. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  4. Medical Imaging Informatics: Towards a Personalized Computational Patient.

    Science.gov (United States)

    Ayache, N

    2016-05-20

    Medical Imaging Informatics has become a fast evolving discipline at the crossing of Informatics, Computational Sciences, and Medicine that is profoundly changing medical practices, for the patients' benefit.

  5. SHEAT for PC. A computer code for probabilistic seismic hazard analysis for personal computer, user's manual

    International Nuclear Information System (INIS)

    Yamada, Hiroyuki; Tsutsumi, Hideaki; Ebisawa, Katsumi; Suzuki, Masahide

    2002-03-01

    The SHEAT code developed at Japan Atomic Energy Research Institute is for probabilistic seismic hazard analysis which is one of the tasks needed for seismic Probabilistic Safety Assessment (PSA) of a nuclear power plant. At first, SHEAT was developed as the large sized computer version. In addition, a personal computer version was provided to improve operation efficiency and generality of this code in 2001. It is possible to perform the earthquake hazard analysis, display and the print functions with the Graphical User Interface. With the SHEAT for PC code, seismic hazard which is defined as an annual exceedance frequency of occurrence of earthquake ground motions at various levels of intensity at a given site is calculated by the following two steps as is done with the large sized computer. One is the modeling of earthquake generation around a site. Future earthquake generation (locations, magnitudes and frequencies of postulated earthquake) is modeled based on the historical earthquake records, active fault data and expert judgment. Another is the calculation of probabilistic seismic hazard at the site. An earthquake ground motion is calculated for each postulated earthquake using an attenuation model taking into account its standard deviation. Then the seismic hazard at the site is calculated by summing the frequencies of ground motions by all the earthquakes. This document is the user's manual of the SHEAT for PC code. It includes: (1) Outline of the code, which include overall concept, logical process, code structure, data file used and special characteristics of code, (2) Functions of subprogram and analytical models in them, (3) Guidance of input and output data, (4) Sample run result, and (5) Operational manual. (author)

  6. Use of a personal computer for instrumentation testing at the FFTF

    International Nuclear Information System (INIS)

    Clark, D.A.

    1985-01-01

    The FFTF uses computers to assist in performance of instrumentation calibration checks for Technical Specification compliance. When the computers used for these checks are not available, back-up methods must be used. A method of using a personal computer to serve as a back-up is discussed, and the hardware used is described

  7. Developing Educational Computer Animation Based on Human Personality Types

    Science.gov (United States)

    Musa, Sajid; Ziatdinov, Rushan; Sozcu, Omer Faruk; Griffiths, Carol

    2015-01-01

    Computer animation in the past decade has become one of the most noticeable features of technology-based learning environments. By its definition, it refers to simulated motion pictures showing movement of drawn objects, and is often defined as the art in movement. Its educational application known as educational computer animation is considered…

  8. A validation study of the Keyboard Personal Computer Style instrument (K-PeCS) for use with children.

    Science.gov (United States)

    Green, Dido; Meroz, Anat; Margalit, Adi Edit; Ratzon, Navah Z

    2012-11-01

    This study examines a potential instrument for measurement of typing postures of children. This paper describes inter-rater, test-retest reliability and concurrent validity of the Keyboard Personal Computer Style instrument (K-PeCS), an observational measurement of postures and movements during keyboarding, for use with children. Two trained raters independently rated videos of 24 children (aged 7-10 years). Six children returned one week later for identifying test-retest reliability. Concurrent validity was assessed by comparing ratings obtained using the K-PECS to scores from a 3D motion analysis system. Inter-rater reliability was moderate to high for 12 out of 16 items (Kappa: 0.46 to 1.00; correlation coefficients: 0.77-0.95) and test-retest reliability varied across items (Kappa: 0.25 to 0.67; correlation coefficients: r = 0.20 to r = 0.95). Concurrent validity compared favourably across arm pathlength, wrist extension and ulnar deviation. In light of the limitations of other tools the K-PeCS offers a fairly affordable, reliable and valid instrument to address the gap for measurement of typing styles of children, despite the shortcomings of some items. However further research is required to refine the instrument for use in evaluating typing among children. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  9. Reliability of real-time computing with radiation data feedback at accidental release

    International Nuclear Information System (INIS)

    Deme, S.; Feher, I.; Lang, E.

    1990-01-01

    At the first workshop in 1985 we reported on the real-time dose computing method used at the Paks Nuclear Power Plant and on the telemetric system developed for the normalization of the computed data. At present, the computing method normalized for the telemetric data represents the primary information for deciding on any necessary counter measures in case of a nuclear reactor accident. In this connection we analyzed the reliability of the results obtained in this manner. The points of the analysis were: how the results are influenced by the choice of certain parameters that cannot be determined by direct methods and how the improperly chosen diffusion parameters would distort the determination of environmental radiation parameters normalized on the basis of the measurements ( 131 I activity concentration, gamma dose rate) at points lying at a given distance from the measuring stations. A further source of errors may be that, when determining the level of gamma radiation, the radionuclide doses in the cloud and on the ground surface are measured together by the environmental monitoring stations, whereas these doses appear separately in the computations. At the Paks NPP it is the time integral of the aiborne activity concentration of vapour form 131 I which is determined. This quantity includes neither the other physical and chemical forms of 131 I nor the other isotopes of radioiodine. We gave numerical examples for the uncertainties due to the above factors. As a result, we arrived at the conclusions that there is a need to decide on accident-related measures based on the computing method that the dose uncertainties may reach one order of magnitude for points lying far from the monitoring stations. Different measures are discussed to make the uncertainties significantly lower

  10. Reliability of observer ratings in the assessment of personality disorders: a preliminary study.

    Science.gov (United States)

    Coolidge, F L; Burns, E M; Mooney, J A

    1995-01-01

    A 200-item, self-report personality disorder inventory (Coolidge Axis II Inventory; CATI) was administered to 52 married target subjects. Their spouses and a close friend completed a significant-other form about the targets. The mean correlation across all personality disorder scales was .51 for the targets-spouses, .36 for the targets-friends, and .41 for the spouses-friends. Twenty-eight target-spouse correlations were significant and ranged from .99 to -.40. The mean correlation for the individual 13 personality disorder scales was .46 for target-spouses and ranged from .63 for the histrionic scale to .27 for the paranoid scale. The results were interpreted as establishing a basis for significant other assessment of personality disorders.

  11. reliability reliability

    African Journals Online (AJOL)

    eobe

    Corresponding author, Tel: +234-703. RELIABILITY .... V , , given by the code of practice. However, checks must .... an optimization procedure over the failure domain F corresponding .... of Concrete Members based on Utility Theory,. Technical ...

  12. A reliable and valid questionnaire was developed to measure computer vision syndrome at the workplace.

    Science.gov (United States)

    Seguí, María del Mar; Cabrero-García, Julio; Crespo, Ana; Verdú, José; Ronda, Elena

    2015-06-01

    To design and validate a questionnaire to measure visual symptoms related to exposure to computers in the workplace. Our computer vision syndrome questionnaire (CVS-Q) was based on a literature review and validated through discussion with experts and performance of a pretest, pilot test, and retest. Content validity was evaluated by occupational health, optometry, and ophthalmology experts. Rasch analysis was used in the psychometric evaluation of the questionnaire. Criterion validity was determined by calculating the sensitivity and specificity, receiver operator characteristic curve, and cutoff point. Test-retest repeatability was tested using the intraclass correlation coefficient (ICC) and concordance by Cohen's kappa (κ). The CVS-Q was developed with wide consensus among experts and was well accepted by the target group. It assesses the frequency and intensity of 16 symptoms using a single rating scale (symptom severity) that fits the Rasch rating scale model well. The questionnaire has sensitivity and specificity over 70% and achieved good test-retest repeatability both for the scores obtained [ICC = 0.802; 95% confidence interval (CI): 0.673, 0.884] and CVS classification (κ = 0.612; 95% CI: 0.384, 0.839). The CVS-Q has acceptable psychometric properties, making it a valid and reliable tool to control the visual health of computer workers, and can potentially be used in clinical trials and outcome research. Copyright © 2015 Elsevier Inc. All rights reserved.

  13. Reliability of lower limb alignment measures using an established landmark-based method with a customized computer software program

    Science.gov (United States)

    Sled, Elizabeth A.; Sheehy, Lisa M.; Felson, David T.; Costigan, Patrick A.; Lam, Miu; Cooke, T. Derek V.

    2010-01-01

    The objective of the study was to evaluate the reliability of frontal plane lower limb alignment measures using a landmark-based method by (1) comparing inter- and intra-reader reliability between measurements of alignment obtained manually with those using a computer program, and (2) determining inter- and intra-reader reliability of computer-assisted alignment measures from full-limb radiographs. An established method for measuring alignment was used, involving selection of 10 femoral and tibial bone landmarks. 1) To compare manual and computer methods, we used digital images and matching paper copies of five alignment patterns simulating healthy and malaligned limbs drawn using AutoCAD. Seven readers were trained in each system. Paper copies were measured manually and repeat measurements were performed daily for 3 days, followed by a similar routine with the digital images using the computer. 2) To examine the reliability of computer-assisted measures from full-limb radiographs, 100 images (200 limbs) were selected as a random sample from 1,500 full-limb digital radiographs which were part of the Multicenter Osteoarthritis (MOST) Study. Three trained readers used the software program to measure alignment twice from the batch of 100 images, with two or more weeks between batch handling. Manual and computer measures of alignment showed excellent agreement (intraclass correlations [ICCs] 0.977 – 0.999 for computer analysis; 0.820 – 0.995 for manual measures). The computer program applied to full-limb radiographs produced alignment measurements with high inter- and intra-reader reliability (ICCs 0.839 – 0.998). In conclusion, alignment measures using a bone landmark-based approach and a computer program were highly reliable between multiple readers. PMID:19882339

  14. Reliability of the EK scale, a functional test for non-ambulatory persons with Duchenne dystrophy

    DEFF Research Database (Denmark)

    Steffensen, Birgit F.; Hyde, Sylvia A.; Attermann, Jørn

    2002-01-01

    The EK {Egen Klassifikation} scale was developed to assess overall functional ability in the non-ambulatory stage of Duchenne muscular dystrophy (DMD). The purpose of this study was to examine the reliability of the EK scale. Six subjects with DMD, selected as representative of the entire range...

  15. Reliability of an x-ray system for calibrating and testing personal radiation dosimeters

    Energy Technology Data Exchange (ETDEWEB)

    Guimarães, M.C.; Silva, C.R.E.; Silva, T.A. da [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Rosado, P.H.G.; Cunha, P.G. [Instituto de Radioproteção e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2017-07-01

    Metrology laboratories are expected to maintain standardized radiation beams and traceable standard dosimeters to provide reliable calibrations or testing of detectors. Results of the characterization of an x-ray system for performing calibration and testing of radiation dosimeters used for individual monitoring are shown in this work. (author)

  16. Reliability of an x-ray system for calibrating and testing personal radiation dosimeters

    Science.gov (United States)

    Guimarães, M. C.; Silva, C. R. E.; Rosado, P. H. G.; Cunha, P. G.; Da Silva, T. A.

    2018-03-01

    Metrology laboratories are expected to maintain standardized radiation beams and traceable standard dosimeters to provide reliable calibrations or testing of detectors. Results of the characterization of an x-ray system for performing calibration and testing of radiation dosimeters used for individual monitoring are shown in this work.

  17. Reliability of an x-ray system for calibrating and testing personal radiation dosimeters

    International Nuclear Information System (INIS)

    Guimarães, M.C.; Silva, C.R.E.; Silva, T.A. da; Rosado, P.H.G.; Cunha, P.G.

    2017-01-01

    Metrology laboratories are expected to maintain standardized radiation beams and traceable standard dosimeters to provide reliable calibrations or testing of detectors. Results of the characterization of an x-ray system for performing calibration and testing of radiation dosimeters used for individual monitoring are shown in this work. (author)

  18. Automation of potentiometric titration with a personal computer using ...

    African Journals Online (AJOL)

    sampling was designed and tested for automation of potentiometric titrations with personal ... automation permits us to carry out new types of experiments, such as those requiring ... have proved to be very useful in routine tasks but not in research, due to their ... This is done by a simple delay sub-routine in data acquisition.

  19. Co-occurrence of addictive behaviours: personality factors related to substance use, gambling and computer gaming.

    Science.gov (United States)

    Walther, Birte; Morgenstern, Matthis; Hanewinkel, Reiner

    2012-01-01

    To investigate co-occurrence and shared personality characteristics of problematic computer gaming, problematic gambling and substance use. Cross-sectional survey data were collected from 2,553 German students aged 12-25 years. Self-report measures of substance use (alcohol, tobacco and cannabis), problematic gambling (South Oaks Gambling Screen - Revised for Adolescents, SOGS-RA), problematic computer gaming (Video Game Dependency Scale, KFN-CSAS-II), and of twelve different personality characteristics were obtained. Analyses revealed positive correlations between tobacco, alcohol and cannabis use and a smaller positive correlation between problematic gambling and problematic computer gaming. Problematic computer gaming co-occurred only with cannabis use, whereas problematic gambling was associated with all three types of substance use. Multivariate multilevel analyses showed differential patterns of personality characteristics. High impulsivity was the only personality characteristic associated with all five addictive behaviours. Depression and extraversion were specific to substance users. Four personality characteristics were specifically associated with problematic computer gaming: irritability/aggression, social anxiety, ADHD, and low self-esteem. Problematic gamblers seem to be more similar to substance users than problematic computer gamers. From a personality perspective, results correspond to the inclusion of gambling in the same DSM-V category as substance use and question a one-to-one proceeding for computer gaming. Copyright © 2012 S. Karger AG, Basel.

  20. Improving Wind Turbine Drivetrain Reliability Using a Combined Experimental, Computational, and Analytical Approach

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Y.; van Dam, J.; Bergua, R.; Jove, J.; Campbell, J.

    2015-03-01

    Nontorque loads induced by the wind turbine rotor overhang weight and aerodynamic forces can greatly affect drivetrain loads and responses. If not addressed properly, these loads can result in a decrease in gearbox component life. This work uses analytical modeling, computational modeling, and experimental data to evaluate a unique drivetrain design that minimizes the effects of nontorque loads on gearbox reliability: the Pure Torque(R) drivetrain developed by Alstom. The drivetrain has a hub-support configuration that transmits nontorque loads directly into the tower rather than through the gearbox as in other design approaches. An analytical model of Alstom's Pure Torque drivetrain provides insight into the relationships among turbine component weights, aerodynamic forces, and the resulting drivetrain loads. Main shaft bending loads are orders of magnitude lower than the rated torque and are hardly affected by wind conditions and turbine operations.

  1. Quantitative software-reliability analysis of computer codes relevant to nuclear safety

    International Nuclear Information System (INIS)

    Mueller, C.J.

    1981-12-01

    This report presents the results of the first year of an ongoing research program to determine the probability of failure characteristics of computer codes relevant to nuclear safety. An introduction to both qualitative and quantitative aspects of nuclear software is given. A mathematical framework is presented which will enable the a priori prediction of the probability of failure characteristics of a code given the proper specification of its properties. The framework consists of four parts: (1) a classification system for software errors and code failures; (2) probabilistic modeling for selected reliability characteristics; (3) multivariate regression analyses to establish predictive relationships among reliability characteristics and generic code property and development parameters; and (4) the associated information base. Preliminary data of the type needed to support the modeling and the predictions of this program are described. Illustrations of the use of the modeling are given but the results so obtained, as well as all results of code failure probabilities presented herein, are based on data which at this point are preliminary, incomplete, and possibly non-representative of codes relevant to nuclear safety

  2. Improving reliability of state estimation programming and computing suite based on analyzing a fault tree

    Directory of Open Access Journals (Sweden)

    Kolosok Irina

    2017-01-01

    Full Text Available Reliable information on the current state parameters obtained as a result of processing the measurements from systems of the SCADA and WAMS data acquisition and processing through methods of state estimation (SE is a condition that enables to successfully manage an energy power system (EPS. SCADA and WAMS systems themselves, as any technical systems, are subject to failures and faults that lead to distortion and loss of information. The SE procedure enables to find erroneous measurements, therefore, it is a barrier for the distorted information to penetrate into control problems. At the same time, the programming and computing suite (PCS implementing the SE functions may itself provide a wrong decision due to imperfection of the software algorithms and errors. In this study, we propose to use a fault tree to analyze consequences of failures and faults in SCADA and WAMS and in the very SE procedure. Based on the analysis of the obtained measurement information and on the SE results, we determine the state estimation PCS fault tolerance level featuring its reliability.

  3. A Newly Developed Method for Computing Reliability Measures in a Water Supply Network

    Directory of Open Access Journals (Sweden)

    Jacek Malinowski

    2016-01-01

    Full Text Available A reliability model of a water supply network has beens examined. Its main features are: a topology that can be decomposed by the so-called state factorization into a (relativelysmall number of derivative networks, each having a series-parallel structure (1, binary-state components (either operative or failed with given flow capacities (2, a multi-state character of the whole network and its sub-networks - a network state is defined as the maximal flow between a source (sources and a sink (sinks (3, all capacities (component, network, and sub-network have integer values (4. As the network operates, its state changes due to component failures, repairs, and replacements. A newly developed method of computing the inter-state transition intensities has been presented. It is based on the so-called state factorization and series-parallel aggregation. The analysis of these intensities shows that the failure-repair process of the considered system is an asymptotically homogenous Markov process. It is also demonstrated how certain reliability parameters useful for the network maintenance planning can be determined on the basis of the asymptotic intensities. For better understanding of the presented method, an illustrative example is given. (original abstract

  4. Selection of suitable hand gestures for reliable myoelectric human computer interface.

    Science.gov (United States)

    Castro, Maria Claudia F; Arjunan, Sridhar P; Kumar, Dinesh K

    2015-04-09

    Myoelectric controlled prosthetic hand requires machine based identification of hand gestures using surface electromyogram (sEMG) recorded from the forearm muscles. This study has observed that a sub-set of the hand gestures have to be selected for an accurate automated hand gesture recognition, and reports a method to select these gestures to maximize the sensitivity and specificity. Experiments were conducted where sEMG was recorded from the muscles of the forearm while subjects performed hand gestures and then was classified off-line. The performances of ten gestures were ranked using the proposed Positive-Negative Performance Measurement Index (PNM), generated by a series of confusion matrices. When using all the ten gestures, the sensitivity and specificity was 80.0% and 97.8%. After ranking the gestures using the PNM, six gestures were selected and these gave sensitivity and specificity greater than 95% (96.5% and 99.3%); Hand open, Hand close, Little finger flexion, Ring finger flexion, Middle finger flexion and Thumb flexion. This work has shown that reliable myoelectric based human computer interface systems require careful selection of the gestures that have to be recognized and without such selection, the reliability is poor.

  5. Reliability of computer designed surgical guides in six implant rehabilitations with two years follow-up.

    Science.gov (United States)

    Giordano, Mauro; Ausiello, Pietro; Martorelli, Massimo; Sorrentino, Roberto

    2012-09-01

    To evaluate the reliability and accuracy of computer-designed surgical guides in osseointegrated oral implant rehabilitation. Six implant rehabilitations, with a total of 17 implants, were completed with computer-designed surgical guides, performed with the master model developed by muco-compressive and muco-static impressions. In the first case, the surgical guide had exclusively mucosal support, in the second case exclusively dental support. For all six cases computer-aided surgical planning was performed by virtual analyses with 3D models obtained by dental scan DICOM data. The accuracy and stability of implant osseointegration over two years post surgery was then evaluated with clinical and radiographic examinations. Radiographic examination, performed with digital acquisitions (RVG - Radio Video graph) and parallel techniques, allowed two-dimensional feedback with a margin of linear error of 10%. Implant osseointegration was recorded for all the examined rehabilitations. During the clinical and radiographic post-surgical assessments, over the following two years, the peri-implant bone level was found to be stable and without appearance of any complications. The margin of error recorded between pre-operative positions assigned by virtual analysis and the post-surgical digital radiographic observations was as low as 0.2mm. Computer-guided implant surgery can be very effective in oral rehabilitations, providing an opportunity for the surgeon: (a) to avoid the necessity of muco-periosteal detachments and then (b) to perform minimally invasive interventions, whenever appropriate, with a flapless approach. Copyright © 2012 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

  6. A structural approach to constructing perspective efficient and reliable human-computer interfaces

    International Nuclear Information System (INIS)

    Balint, L.

    1989-01-01

    The principles of human-computer interface (HCI) realizations are investigated with the aim of getting closer to a general framework and thus, to a more or less solid background of constructing perspective efficient, reliable and cost-effective human-computer interfaces. On the basis of characterizing and classifying the different HCI solutions, the fundamental problems of interface construction are pointed out especially with respect to human error occurrence possibilities. The evolution of HCI realizations is illustrated by summarizing the main properties of past, present and foreseeable future interface generations. HCI modeling is pointed out to be a crucial problem in theoretical and practical investigations. Suggestions concerning HCI structure (hierarchy and modularity), HCI functional dynamics (mapping from input to output information), minimization of human error caused system failures (error-tolerance, error-recovery and error-correcting) as well as cost-effective HCI design and realization methodology (universal and application-oriented vs. application-specific solutions) are presented. The concept of RISC-based and SCAMP-type HCI components is introduced with the aim of having a reduced interaction scheme in communication and a well defined architecture in HCI components' internal structure. HCI efficiency and reliability are dealt with, by taking into account complexity and flexibility. The application of fast computerized prototyping is also briefly investigated as an experimental device of achieving simple, parametrized, invariant HCI models. Finally, a concise outline of an approach of how to construct ideal HCI's is also suggested by emphasizing the open questions and the need of future work related to the proposals, as well. (author). 14 refs, 6 figs

  7. Personality self-reports are concurrently reliable and valid during acute depressive episodes.

    Science.gov (United States)

    Costa, Paul T; Bagby, R Michael; Herbst, Jeffrey H; McCrae, Robert R

    2005-12-01

    It is alleged that depression distorts the assessment of general personality traits. To test that hypothesis, we examined scores on the Revised NEO Personality Inventory (NEO-PI-R) administered to acutely depressed patients at baseline and 14 to 26 weeks after treatment with antidepressant medication. Two hundred and fifty patients completed the NEO-PI-R at baseline, 109 patients after 14 to 26 weeks of antidepressant pharmacotherapy. 48 patients (49.5%) were identified as responders while 49 (50.5%) were identified as non-responders. The remaining 12 patients were excluded because they met HRSD response criteria but not the SCID-I MDD criteria at treatment completion. At baseline, NEO-PI-R scales showed high internal consistency and replicated the normative factor structure, suggesting that psychometric properties were preserved. Among non-responders, retest correlations were uniformly high (rs=.50 to .88) and mean levels showed little change, providing evidence for the consistency of personality self-reports during an acute depressive episode. NEO-PI-R scales showed construct validity in the concurrent prediction of a number of clinical criteria. Effective treatment had significant effects on the mean levels of neuroticism, which decreased, and extraversion, openness, and conscientiousness, which increased. The participants were from a clinical database and were not randomly assigned for the treatment. The results suggest that the effect of acute depression is to amplify somewhat the personality profile of people prone to depression. Rather than regard these depression-caused changes in assessed personality trait levels as a distortion, we interpret them as accurate reflections of the current condition of the individual. Personality traits have biological bases, and when they are changed (by disease or therapeutic interventions) trait levels change.

  8. Tablet computers and eBooks. Unlocking the potential for personal learning environments?

    NARCIS (Netherlands)

    Kalz, Marco

    2012-01-01

    Kalz, M. (2012, 9 May). Tablet computers and eBooks. Unlocking the potential for personal learning environments? Invited presentation during the annual conference of the European Association for Distance Learning (EADL), Noordwijkerhout, The Netherlands.

  9. A flexible image archiving system using a personal computer and optical disk

    International Nuclear Information System (INIS)

    Parkin, A.; Norwood, H.; Hall, A.J.

    1989-01-01

    The authors describe the application of a personal computer and optical disk as an image archiving device, which brings the advantages of large capacity, low cost and savings on storage space. (author)

  10. [Reliability of the PRISCUS-PAQ. Questionnaire to assess physical activity of persons aged 70 years and older].

    Science.gov (United States)

    Trampisch, U; Platen, P; Burghaus, I; Moschny, A; Wilm, S; Thiem, U; Hinrichs, T

    2010-12-01

    A questionnaire (Q) to measure physical activity (PA) of persons ≥70 years for epidemiological research is lacking. The aim was to develop the PRISCUS-PAQ and test the reliability in community-dwelling people (≥70 years). Validated PA questionnaires were translated and adapted to design the PRISCUS-PAQ. Its test-retest reliability for 91 randomly selected people (36% men) aged 70-98 (76±5) years ranged from 0.47 (walking) to 0.82 (riding a bicycle). The overall activity score was 0.59 as determined by the intraclass correlation coefficient (ICC). Recording of general activities, e.g., housework (ICC=0.59), was in general less reliable than athletic activities, e.g., gymnastics (ICC=0.76). The PRISCUS-PAQ, which is a short instrument with acceptable reliability to collect the physical activity of the elderly in a telephone interview, will be used to collect data in a large cohort of older people in the German research consortium PRISCUS.

  11. Computer Algebra-based RBES personalized menu generator

    OpenAIRE

    Roanes-Lozano, Eugenio; Galán-García, José Luis; Aguilera-Venegas, Gabriel

    2015-01-01

    People have many constraints concerning the food they eat. These constraints can be based on religious believes, be due to food allergies or to illnesses, or can be derived just from personal preferences. Therefore, preparing menus at hospitals and restaurants can be really complex. Another special situation arise when travel- ing abroad. It is not always enough to know the brief description in the restaurant menu or the explanation of the waiter. For example, “calamares en su...

  12. Context-aware Cloud Computing for Personal Learning Environment

    OpenAIRE

    Chen, Feng; Al-Bayatti, Ali Hilal; Siewe, Francois

    2016-01-01

    Virtual learning means to learn from social interactions in a virtual platform that enables people to study anywhere and at any time. Current Virtual Learning Environments (VLEs) are a range of integrated web based applications to support and enhance the education. Normally, VLEs are institution centric; are owned by the institutions and are designed to support formal learning, which do not support lifelong learning. These limitations led to the research of Personal Learning Environments (PLE...

  13. Reliability of the Attitudes Toward Women Scale (AWS) and the Personal Attributes Questionnaire (PAQ).

    Science.gov (United States)

    Yoder, Jan D.; And Others

    In recent years, there has been a dramatic increase in the volume of empirical research directed toward the issue of sex-roles, including the development of evaluative instruments such as the Attitudes Toward Women Scale (AWS) and the Personal Attributes Questionnaire (PAQ). The United States Military Academy's Project Athena, designed to examine…

  14. Isometric and isokinetic muscle strength in the upper extremity can be reliably measured in persons with chronic stroke.

    Science.gov (United States)

    Ekstrand, Elisabeth; Lexell, Jan; Brogårdh, Christina

    2015-09-01

    To evaluate the test-retest reliability of isometric and isokinetic muscle strength measurements in the upper extremity after stroke. A test-retest design. Forty-five persons with mild to moderate paresis in the upper extremity > 6 months post-stroke. Isometric arm strength (shoulder abduction, elbow flexion), isokinetic arm strength (elbow extension/flexion) and isometric grip strength were measured with electronic dynamometers. Reliability was evaluated with intra-class correlation coefficients (ICC), changes in the mean, standard error of measurements (SEM) and smallest real differences (SRD). Reliability was high (ICCs: 0.92-0.97). The absolute and relative (%) SEM ranged from 2.7 Nm (5.6%) to 3.0 Nm (9.4%) for isometric arm strength, 2.6 Nm (7.4%) to 2.9 Nm (12.6%) for isokinetic arm strength, and 22.3 N (7.6%) to 26.4 N (9.2%) for grip strength. The absolute and relative (%) SRD ranged from 7.5 Nm (15.5%) to 8.4 Nm (26.1%) for isometric arm strength, 7.1 Nm (20.6%) to 8.0 Nm (34.8%) for isokinetic arm strength, and 61.8 N (21.0%) to 73.3 N (25.6%) for grip strength. Muscle strength in the upper extremity can be reliably measured in persons with chronic stroke. Isometric measurements yield smaller measurement errors than isokinetic measurements and might be preferred, but the choice depends on the research question.

  15. A Computer-Supported Method to Reveal and Assess Personal Professional Theories in Vocational Education

    Science.gov (United States)

    van den Bogaart, Antoine C. M.; Bilderbeek, Richel J. C.; Schaap, Harmen; Hummel, Hans G. K.; Kirschner, Paul A.

    2016-01-01

    This article introduces a dedicated, computer-supported method to construct and formatively assess open, annotated concept maps of Personal Professional Theories (PPTs). These theories are internalised, personal bodies of formal and practical knowledge, values, norms and convictions that professionals use as a reference to interpret and acquire…

  16. Cloud Computing Application of Personal Information's Security in Network Sales-channels

    OpenAIRE

    Sun Qiong; Min Liu; Shiming Pang

    2013-01-01

    With the promotion of Internet sales, the security of personal information to network users have become increasingly demanding. The existing network of sales channels has personal information security risks, vulnerable to hacker attacking. Taking full advantage of cloud security management strategy, cloud computing security management model is introduced to the network sale of personal information security applications, which is to solve the problem of information leakage. Then we proposed me...

  17. [Individual psychological features in patients with computer game addiction suffering and predisposed persons].

    Science.gov (United States)

    Kardashian, R A

    2018-01-01

    To study personality characteristics in adolescents with computer game addiction. The study included students of grades 7 to 10 at the age of 12-17 years (14.6±2.4 years), their parents and school teachers. The results of a study showed the following combination in patients: 'genophilic' type of DPT with schizoid personality accentuation and 'projection' type of psychological protection, and 'dignitophilic' type of DPT with labile personality accentuation and 'denial' type of PP.

  18. Graphing and Percentage Applications Using the Personal Computer.

    Science.gov (United States)

    Innes, Jay

    1985-01-01

    The paper describes how "IBM Graphing Assistant" and "Apple Softgraph" can foster a multifaceted approach to application of mathematical concepts and how a survey can be undertaken using the computer as word processor, data bank, and source of visual displays. Mathematical skills reinforced include estimating, rounding, graphing, and solving…

  19. VIBRO-DIAGNOSTIC SYSTEM ON BASIS OF PERSONAL COMPUTER

    Directory of Open Access Journals (Sweden)

    V. V. Bokut

    2007-01-01

    Full Text Available A system for vibration diagnostics based on a mobile computer and two-channel microprocessor measuring device has been developed. Usage of fast Hartley-Fourier transform allows to increase frequency resolution up to 25000 spectral lines that makes it possible to use the system for wide range of applications. 

  20. Non-binary decomposition trees - a method of reliability computation for systems with known minimal paths/cuts

    Energy Technology Data Exchange (ETDEWEB)

    Malinowski, Jacek

    2004-05-01

    A coherent system with independent components and known minimal paths (cuts) is considered. In order to compute its reliability, a tree structure T is constructed whose nodes contain the modified minimal paths (cuts) and numerical values. The value of a non-leaf node is a function of its child nodes' values. The values of leaf nodes are calculated from a simple formula. The value of the root node is the system's failure probability (reliability). Subsequently, an algorithm computing the system's failure probability (reliability) is constructed. The algorithm scans all nodes of T using a stack structure for this purpose. The nodes of T are alternately put on and removed from the stack, their data being modified in the process. Once the algorithm has terminated, the stack contains only the final modification of the root node of T, and its value is equal to the system's failure probability (reliability)

  1. Non-binary decomposition trees - a method of reliability computation for systems with known minimal paths/cuts

    International Nuclear Information System (INIS)

    Malinowski, Jacek

    2004-01-01

    A coherent system with independent components and known minimal paths (cuts) is considered. In order to compute its reliability, a tree structure T is constructed whose nodes contain the modified minimal paths (cuts) and numerical values. The value of a non-leaf node is a function of its child nodes' values. The values of leaf nodes are calculated from a simple formula. The value of the root node is the system's failure probability (reliability). Subsequently, an algorithm computing the system's failure probability (reliability) is constructed. The algorithm scans all nodes of T using a stack structure for this purpose. The nodes of T are alternately put on and removed from the stack, their data being modified in the process. Once the algorithm has terminated, the stack contains only the final modification of the root node of T, and its value is equal to the system's failure probability (reliability)

  2. Personal diabetes management system based on ubiquitous computing technology.

    Science.gov (United States)

    Park, Kyung-Soon; Kim, Nam-Jin; Hong, Joo-Hyun; Park, Mi-Sook; Cha, Eun-Jung; Lee, Tae-Soo

    2006-01-01

    Assisting diabetes patients to self manage blood glucose test and insulin injection is of great importance for their healthcare. This study presented a PDA based system to manage the personal glucose level data interfaced with a small glucometer through a serial port. The data stored in the PDA can be transmitted by cradle or wireless communication to the remote web-server, where further medical analysis and service is provided. This system enables more efficient and systematic management of diabetes patients through self management and remote medical practice.

  3. Description of the TREBIL, CRESSEX and STREUSL computer programs, that belongs to RALLY computer code pack for the analysis of reliability systems

    International Nuclear Information System (INIS)

    Fernandes Filho, T.L.

    1982-11-01

    The RALLY computer code pack (RALLY pack) is a set of computer codes destinate to the reliability of complex systems, aiming to a risk analysis. Three of the six codes, are commented, presenting their purpose, input description, calculation methods and results obtained with each one of those computer codes. The computer codes are: TREBIL, to obtain the fault tree logical equivalent; CRESSEX, to obtain the minimal cut and the punctual values of the non-reliability and non-availability of the system; and STREUSL, for the dispersion calculation of those values around the media. In spite of the CRESSEX, in its version available at CNEN, uses a little long method to obtain the minimal cut in an HB-CNEN system, the three computer programs show good results, mainly the STREUSL, which permits the simulation of various components. (E.G.) [pt

  4. Seamless personal health information system in cloud computing.

    Science.gov (United States)

    Chung, Wan-Young; Fong, Ee May

    2014-01-01

    Noncontact ECG measurement has gained popularity these days due to its noninvasive and conveniences to be applied on daily life. This approach does not require any direct contact between patient's skin and sensor for physiological signal measurement. The noncontact ECG measurement is integrated with mobile healthcare system for health status monitoring. Mobile phone acts as the personal health information system displaying health status and body mass index (BMI) tracking. Besides that, it plays an important role being the medical guidance providing medical knowledge database including symptom checker and health fitness guidance. At the same time, the system also features some unique medical functions that cater to the living demand of the patients or users, including regular medication reminders, alert alarm, medical guidance, appointment scheduling. Lastly, we demonstrate mobile healthcare system with web application for extended uses, thus health data are clouded into web server system and web database storage. This allows remote health status monitoring easily and so forth it promotes a cost effective personal healthcare system.

  5. Computer Games as Therapy for Persons with Stroke.

    Science.gov (United States)

    Lauterbach, Sarah A; Foreman, Matt H; Engsberg, Jack R

    2013-02-01

    Stroke affects approximately 800,000 individuals each year, with 65% having residual impairments. Studies have demonstrated that mass practice leads to regaining motor function in affected extremities; however, traditional therapy does not include the repetitions needed for this recovery. Videogames have been shown to be good motivators to complete repetitions. Advances in technology and low-cost hardware bring new opportunities to use computer games during stroke therapy. This study examined the use of the Microsoft (Redmond, WA) Kinect™ and Flexible Action and Articulated Skeleton Toolkit (FAAST) software as a therapy tool to play existing free computer games on the Internet. Three participants attended a 1-hour session where they played two games with upper extremity movements as game controls. Video was taken for analysis of movement repetitions, and questions were answered about participant history and their perceptions of the games. Participants remained engaged through both games; regardless of previous computer use all participants successfully played two games. Five minutes of game play averaged 34 repetitions of the affected extremity. The Intrinsic Motivation Inventory showed a high level of satisfaction in two of the three participants. The Kinect Sensor with the FAAST software has the potential to be an economical tool to be used alongside traditional therapy to increase the number of repetitions completed in a motivating and engaging way for clients.

  6. Automatic data acquisition system of environmental radiation monitor with a personal computer

    International Nuclear Information System (INIS)

    Ohkubo, Tohru; Nakamura, Takashi.

    1984-05-01

    The automatic data acquisition system of environmental radiation monitor was developed in a low price by using a PET personal computer. The count pulses from eight monitors settled at four site boundaries were transmitted to a radiation control room by a signal transmission device and analyzed by the computer via 12 channel scaler and PET-CAMAC Interface for graphic display and printing. (author)

  7. Study on Thermal Conductivity of Personal Computer Aluminum-Magnesium Alloy Casing

    Science.gov (United States)

    Liao, MeiHong

    With the rapid development of computer technology, micro-state atoms by simulating the movement of material to analyze the nature of the macro-state have become an important subject. Materials, especially aluminium-magnesium alloy materials, often used in personal computer case, this article puts forward heat conduction model of the material, and numerical methods of heat transfer performance of the material.

  8. Geometric Data Perturbation-Based Personal Health Record Transactions in Cloud Computing

    Science.gov (United States)

    Balasubramaniam, S.; Kavitha, V.

    2015-01-01

    Cloud computing is a new delivery model for information technology services and it typically involves the provision of dynamically scalable and often virtualized resources over the Internet. However, cloud computing raises concerns on how cloud service providers, user organizations, and governments should handle such information and interactions. Personal health records represent an emerging patient-centric model for health information exchange, and they are outsourced for storage by third parties, such as cloud providers. With these records, it is necessary for each patient to encrypt their own personal health data before uploading them to cloud servers. Current techniques for encryption primarily rely on conventional cryptographic approaches. However, key management issues remain largely unsolved with these cryptographic-based encryption techniques. We propose that personal health record transactions be managed using geometric data perturbation in cloud computing. In our proposed scheme, the personal health record database is perturbed using geometric data perturbation and outsourced to the Amazon EC2 cloud. PMID:25767826

  9. Geometric Data Perturbation-Based Personal Health Record Transactions in Cloud Computing

    Directory of Open Access Journals (Sweden)

    S. Balasubramaniam

    2015-01-01

    Full Text Available Cloud computing is a new delivery model for information technology services and it typically involves the provision of dynamically scalable and often virtualized resources over the Internet. However, cloud computing raises concerns on how cloud service providers, user organizations, and governments should handle such information and interactions. Personal health records represent an emerging patient-centric model for health information exchange, and they are outsourced for storage by third parties, such as cloud providers. With these records, it is necessary for each patient to encrypt their own personal health data before uploading them to cloud servers. Current techniques for encryption primarily rely on conventional cryptographic approaches. However, key management issues remain largely unsolved with these cryptographic-based encryption techniques. We propose that personal health record transactions be managed using geometric data perturbation in cloud computing. In our proposed scheme, the personal health record database is perturbed using geometric data perturbation and outsourced to the Amazon EC2 cloud.

  10. Geometric data perturbation-based personal health record transactions in cloud computing.

    Science.gov (United States)

    Balasubramaniam, S; Kavitha, V

    2015-01-01

    Cloud computing is a new delivery model for information technology services and it typically involves the provision of dynamically scalable and often virtualized resources over the Internet. However, cloud computing raises concerns on how cloud service providers, user organizations, and governments should handle such information and interactions. Personal health records represent an emerging patient-centric model for health information exchange, and they are outsourced for storage by third parties, such as cloud providers. With these records, it is necessary for each patient to encrypt their own personal health data before uploading them to cloud servers. Current techniques for encryption primarily rely on conventional cryptographic approaches. However, key management issues remain largely unsolved with these cryptographic-based encryption techniques. We propose that personal health record transactions be managed using geometric data perturbation in cloud computing. In our proposed scheme, the personal health record database is perturbed using geometric data perturbation and outsourced to the Amazon EC2 cloud.

  11. Thinking computers and virtual persons essays on the intentionality of machines

    CERN Document Server

    Dietrich, Eric

    1994-01-01

    Thinking Computers and Virtual Persons: Essays on the Intentionality of Machines explains how computations are meaningful and how computers can be cognitive agents like humans. This book focuses on the concept that cognition is computation.Organized into four parts encompassing 13 chapters, this book begins with an overview of the analogy between intentionality and phlogiston, the 17th-century principle of burning. This text then examines the objection to computationalism that it cannot prevent arbitrary attributions of content to the various data structures and representations involved in a c

  12. The Influence of Personal Characteristics, Interaction: (Computer/Individual), Computer Self-efficacy, Personal Innovativeness in Information Technology to Computer Anxiety in use of Mind your Own Business Accounting Software

    OpenAIRE

    Mayasari, Mega; ., Gudono

    2015-01-01

    The purpose of this study was to identify the factors that cause computer anxiety in the use of Mind Your Own Business (MYOB) accounting software, i.e., to assess if there are any influence of age, gender, amount of training, ownership (usage of accounting software on a regular basis), computer self-efficacy, personal innovativeness in Information Technology (IT) to computer anxiety. The study also examined whether there is a relationship trait anxiety and negative affect to computer self-eff...

  13. Computer-based, personalized cognitive training versus classical computer games: a randomized double-blind prospective trial of cognitive stimulation.

    Science.gov (United States)

    Peretz, Chava; Korczyn, Amos D; Shatil, Evelyn; Aharonson, Vered; Birnboim, Smadar; Giladi, Nir

    2011-01-01

    Many studies have suggested that cognitive training can result in cognitive gains in healthy older adults. We investigated whether personalized computerized cognitive training provides greater benefits than those obtained by playing conventional computer games. This was a randomized double-blind interventional study. Self-referred healthy older adults (n = 155, 68 ± 7 years old) were assigned to either a personalized, computerized cognitive training or to a computer games group. Cognitive performance was assessed at baseline and after 3 months by a neuropsychological assessment battery. Differences in cognitive performance scores between and within groups were evaluated using mixed effects models in 2 approaches: adherence only (AO; n = 121) and intention to treat (ITT; n = 155). Both groups improved in cognitive performance. The improvement in the personalized cognitive training group was significant (p computer games group it was significant (p games in improving visuospatial working memory (p = 0.0001), visuospatial learning (p = 0.0012) and focused attention (p = 0.0019). Personalized, computerized cognitive training appears to be more effective than computer games in improving cognitive performance in healthy older adults. Further studies are needed to evaluate the ecological validity of these findings. Copyright © 2011 S. Karger AG, Basel.

  14. Computer Security: When a person leaves - access rights remain!

    CERN Multimedia

    Computer Security Team

    2014-01-01

    We have been contacted recently by an embarrassed project manager who just figured out that a student who left at the end of 2013 still had access rights to read the whole project folder in February 2014: “How can that be?! In any other company, access rights would be purged at the same time as an employment contract terminates." Not so at CERN.   CERN has always been an open site with an open community. Physical access to the site is lightweight and you just need to have your CERN access card at hand. Further restrictions have only been put in place where safety or security really require them, and CERN does not require you to keep your access card on display. The same holds for the digital world. Once registered at CERN - either by contract, via your experiment or through the Users' office - you own a computing account that provides you with access to a wide variety of computing services. For example, last year 9,730 students/technicians/engineers/researchers/sta...

  15. Personal Computer (PC) based image processing applied to fluid mechanics

    Science.gov (United States)

    Cho, Y.-C.; Mclachlan, B. G.

    1987-01-01

    A PC based image processing system was employed to determine the instantaneous velocity field of a two-dimensional unsteady flow. The flow was visualized using a suspension of seeding particles in water, and a laser sheet for illumination. With a finite time exposure, the particle motion was captured on a photograph as a pattern of streaks. The streak pattern was digitized and processed using various imaging operations, including contrast manipulation, noise cleaning, filtering, statistical differencing, and thresholding. Information concerning the velocity was extracted from the enhanced image by measuring the length and orientation of the individual streaks. The fluid velocities deduced from the randomly distributed particle streaks were interpolated to obtain velocities at uniform grid points. For the interpolation a simple convolution technique with an adaptive Gaussian window was used. The results are compared with a numerical prediction by a Navier-Stokes computation.

  16. Satellite interference analysis and simulation using personal computers

    Science.gov (United States)

    Kantak, Anil

    1988-03-01

    This report presents the complete analysis and formulas necessary to quantify the interference experienced by a generic satellite communications receiving station due to an interfering satellite. Both satellites, the desired as well as the interfering satellite, are considered to be in elliptical orbits. Formulas are developed for the satellite look angles and the satellite transmit angles generally related to the land mask of the receiving station site for both satellites. Formulas for considering Doppler effect due to the satellite motion as well as the Earth's rotation are developed. The effect of the interfering-satellite signal modulation and the Doppler effect on the power received are considered. The statistical formulation of the interference effect is presented in the form of a histogram of the interference to the desired signal power ratio. Finally, a computer program suitable for microcomputers such as IBM AT is provided with the flowchart, a sample run, results of the run, and the program code.

  17. Accuracy and reliability of stitched cone-beam computed tomography images

    Energy Technology Data Exchange (ETDEWEB)

    Egbert, Nicholas [Private Practice, Reconstructive Dental Specialists of Utah, Salt Lake (United States); Cagna, David R.; Ahuja, Swati; Wicks, Russell A. [Dept. of rosthodontics, University of Tennessee Health Science Center College of Dentistry, Memphis (United States)

    2015-03-15

    This study was performed to evaluate the linear distance accuracy and reliability of stitched small field of view (FOV) cone-beam computed tomography (CBCT) reconstructed images for the fabrication of implant surgical guides. Three gutta percha points were fixed on the inferior border of a cadaveric mandible to serve as control reference points. Ten additional gutta percha points, representing fiduciary markers, were scattered on the buccal and lingual cortices at the level of the proposed complete denture flange. A digital caliper was used to measure the distance between the reference points and fiduciary markers, which represented the anatomic linear dimension. The mandible was scanned using small FOV CBCT, and the images were then reconstructed and stitched using the manufacturer's imaging software. The same measurements were then taken with the CBCT software. The anatomic linear dimension measurements and stitched small FOV CBCT measurements were statistically evaluated for linear accuracy. The mean difference between the anatomic linear dimension measurements and the stitched small FOV CBCT measurements was found to be 0.34 mm with a 95% confidence interval of +0.24 - +0.44 mm and a mean standard deviation of 0.30 mm. The difference between the control and the stitched small FOV CBCT measurements was insignificant within the parameters defined by this study. The proven accuracy of stitched small FOV CBCT data sets may allow image-guided fabrication of implant surgical stents from such data sets.

  18. Task analysis and computer aid development for human reliability analysis in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, W. C.; Kim, H.; Park, H. S.; Choi, H. H.; Moon, J. M.; Heo, J. Y.; Ham, D. H.; Lee, K. K.; Han, B. T. [Korea Advanced Institute of Science and Technology, Taejeon (Korea)

    2001-04-01

    Importance of human reliability analysis (HRA) that predicts the error's occurrence possibility in a quantitative and qualitative manners is gradually increased by human errors' effects on the system's safety. HRA needs a task analysis as a virtue step, but extant task analysis techniques have the problem that a collection of information about the situation, which the human error occurs, depends entirely on HRA analyzers. The problem makes results of the task analysis inconsistent and unreliable. To complement such problem, KAERI developed the structural information analysis (SIA) that helps to analyze task's structure and situations systematically. In this study, the SIA method was evaluated by HRA experts, and a prototype computerized supporting system named CASIA (Computer Aid for SIA) was developed for the purpose of supporting to perform HRA using the SIA method. Additionally, through applying the SIA method to emergency operating procedures, we derived generic task types used in emergency and accumulated the analysis results in the database of the CASIA. The CASIA is expected to help HRA analyzers perform the analysis more easily and consistently. If more analyses will be performed and more data will be accumulated to the CASIA's database, HRA analyzers can share freely and spread smoothly his or her analysis experiences, and there by the quality of the HRA analysis will be improved. 35 refs., 38 figs., 25 tabs. (Author)

  19. Accuracy and reliability of stitched cone-beam computed tomography images

    International Nuclear Information System (INIS)

    Egbert, Nicholas; Cagna, David R.; Ahuja, Swati; Wicks, Russell A.

    2015-01-01

    This study was performed to evaluate the linear distance accuracy and reliability of stitched small field of view (FOV) cone-beam computed tomography (CBCT) reconstructed images for the fabrication of implant surgical guides. Three gutta percha points were fixed on the inferior border of a cadaveric mandible to serve as control reference points. Ten additional gutta percha points, representing fiduciary markers, were scattered on the buccal and lingual cortices at the level of the proposed complete denture flange. A digital caliper was used to measure the distance between the reference points and fiduciary markers, which represented the anatomic linear dimension. The mandible was scanned using small FOV CBCT, and the images were then reconstructed and stitched using the manufacturer's imaging software. The same measurements were then taken with the CBCT software. The anatomic linear dimension measurements and stitched small FOV CBCT measurements were statistically evaluated for linear accuracy. The mean difference between the anatomic linear dimension measurements and the stitched small FOV CBCT measurements was found to be 0.34 mm with a 95% confidence interval of +0.24 - +0.44 mm and a mean standard deviation of 0.30 mm. The difference between the control and the stitched small FOV CBCT measurements was insignificant within the parameters defined by this study. The proven accuracy of stitched small FOV CBCT data sets may allow image-guided fabrication of implant surgical stents from such data sets.

  20. Accuracy and reliability of stitched cone-beam computed tomography images.

    Science.gov (United States)

    Egbert, Nicholas; Cagna, David R; Ahuja, Swati; Wicks, Russell A

    2015-03-01

    This study was performed to evaluate the linear distance accuracy and reliability of stitched small field of view (FOV) cone-beam computed tomography (CBCT) reconstructed images for the fabrication of implant surgical guides. Three gutta percha points were fixed on the inferior border of a cadaveric mandible to serve as control reference points. Ten additional gutta percha points, representing fiduciary markers, were scattered on the buccal and lingual cortices at the level of the proposed complete denture flange. A digital caliper was used to measure the distance between the reference points and fiduciary markers, which represented the anatomic linear dimension. The mandible was scanned using small FOV CBCT, and the images were then reconstructed and stitched using the manufacturer's imaging software. The same measurements were then taken with the CBCT software. The anatomic linear dimension measurements and stitched small FOV CBCT measurements were statistically evaluated for linear accuracy. The mean difference between the anatomic linear dimension measurements and the stitched small FOV CBCT measurements was found to be 0.34 mm with a 95% confidence interval of +0.24 - +0.44 mm and a mean standard deviation of 0.30 mm. The difference between the control and the stitched small FOV CBCT measurements was insignificant within the parameters defined by this study. The proven accuracy of stitched small FOV CBCT data sets may allow image-guided fabrication of implant surgical stents from such data sets.

  1. Test-retest reliability of computer-based video analysis of general movements in healthy term-born infants.

    Science.gov (United States)

    Valle, Susanne Collier; Støen, Ragnhild; Sæther, Rannei; Jensenius, Alexander Refsum; Adde, Lars

    2015-10-01

    A computer-based video analysis has recently been presented for quantitative assessment of general movements (GMs). This method's test-retest reliability, however, has not yet been evaluated. The aim of the current study was to evaluate the test-retest reliability of computer-based video analysis of GMs, and to explore the association between computer-based video analysis and the temporal organization of fidgety movements (FMs). Test-retest reliability study. 75 healthy, term-born infants were recorded twice the same day during the FMs period using a standardized video set-up. The computer-based movement variables "quantity of motion mean" (Qmean), "quantity of motion standard deviation" (QSD) and "centroid of motion standard deviation" (CSD) were analyzed, reflecting the amount of motion and the variability of the spatial center of motion of the infant, respectively. In addition, the association between the variable CSD and the temporal organization of FMs was explored. Intraclass correlation coefficients (ICC 1.1 and ICC 3.1) were calculated to assess test-retest reliability. The ICC values for the variables CSD, Qmean and QSD were 0.80, 0.80 and 0.86 for ICC (1.1), respectively; and 0.80, 0.86 and 0.90 for ICC (3.1), respectively. There were significantly lower CSD values in the recordings with continual FMs compared to the recordings with intermittent FMs (ptest-retest reliability of computer-based video analysis of GMs, and a significant association between our computer-based video analysis and the temporal organization of FMs. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  2. Talbot's method for the numerical inversion of Laplace transforms: an implementation for personal computers

    International Nuclear Information System (INIS)

    Garratt, T.J.

    1989-05-01

    Safety assessments of radioactive waste disposal require efficient computer models for the important processes. The present paper is based on an efficient computational technique which can be used to solve a wide variety of safety assessment models. It involves the numerical inversion of analytical solutions to the Laplace-transformed differential equations using a method proposed by Talbot. This method has been implemented on a personal computer in a user-friendly manner. The steps required to implement a particular transform and run the program are outlined. Four examples are described which illustrate the flexibility, accuracy and efficiency of the program. The improvements in computational efficiency described in this paper have application to the probabilistic safety assessment codes ESCORT and MASCOT which are currently under development. Also, it is hoped that the present work will form the basis of software for personal computers which could be used to demonstrate safety assessment procedures to a wide audience. (author)

  3. Establishing a communications link between two different, incompatible, personal computers: with practical examples and illustrations and program code.

    Science.gov (United States)

    Davidson, R W

    1985-01-01

    The increasing need to communicate to exchange data can be handled by personal microcomputers. The necessity for the transference of information stored in one type of personal computer to another type of personal computer is often encountered in the process of integrating multiple sources of information stored in different and incompatible computers in Medical Research and Practice. A practical example is demonstrated with two relatively inexpensive commonly used computers, the IBM PC jr. and the Apple IIe. The basic input/output (I/O) interface chip for serial communication for each computer are joined together using a Null connector and cable to form a communications link. Using BASIC (Beginner's All-purpose Symbolic Instruction Code) Computer Language and the Disk Operating System (DOS) the communications handshaking protocol and file transfer is established between the two computers. The BASIC programming languages used are Applesoft (Apple Personal Computer) and PC BASIC (IBM Personal computer).

  4. International Nuclear Model personal computer (PCINM): Model documentation

    International Nuclear Information System (INIS)

    1992-08-01

    The International Nuclear Model (INM) was developed to assist the Energy Information Administration (EIA), U.S. Department of Energy (DOE) in producing worldwide projections of electricity generation, fuel cycle requirements, capacities, and spent fuel discharges from commercial nuclear reactors. The original INM was developed, maintained, and operated on a mainframe computer system. In spring 1992, a streamlined version of INM was created for use on a microcomputer utilizing CLIPPER and PCSAS software. This new version is known as PCINM. This documentation is based on the new PCINM version. This document is designed to satisfy the requirements of several categories of users of the PCINM system including technical analysts, theoretical modelers, and industry observers. This document assumes the reader is familiar with the nuclear fuel cycle and each of its components. This model documentation contains four chapters and seven appendices. Chapter Two presents the model overview containing the PCINM structure and process flow, the areas for which projections are made, and input data and output reports. Chapter Three presents the model technical specifications showing all model equations, algorithms, and units of measure. Chapter Four presents an overview of all parameters, variables, and assumptions used in PCINM. The appendices present the following detailed information: variable and parameter listings, variable and equation cross reference tables, source code listings, file layouts, sample report outputs, and model run procedures. 2 figs

  5. [Simulation of lung lobe resection with personal computer].

    Science.gov (United States)

    Onuki, T; Murasugi, M; Mae, M; Koyama, K; Ikeda, T; Shimizu, T

    2005-09-01

    Various patterns of branching are seen for pulmonary arteries and veins in the lung hilum. However, thoracic surgeons usually cannot expect to discern much anatomical detail preoperatively. If the surgeon can gain an understanding of individual patterns preoperatively, the risks inherent in exposing the pulmonary vessels in the hilum can be avoided, reducing invasiveness. This software will meet the increasing needs of them in video-assisted thoracoscopic surgery (VATS) which prefer lesser dissections of the vessels and bronchus of hilum. We have produced free application software, where we can mark on pulmonary arteries, vein, bronchus and tumor of the successive images of computed tomography (CT). After receiving a compact disk containing 60 images of 2 mm CT slices, from tumor to hilum, in DICOM format, we required only 1 hour to obtain 3-dimensional images for a patient with other free software (Metasequoia LE). Furthermore, with Metasequoia LE, we can simulate cut the vessels and change the figure of them 3-dimensionally. Although the picture image leaves much room for improvement, we believe it is very attractive for residents because they can simulate operations.

  6. A Cloud Computing Approach to Personal Risk Management: The Open Hazards Group

    Science.gov (United States)

    Graves, W. R.; Holliday, J. R.; Rundle, J. B.

    2010-12-01

    According to the California Earthquake Authority, only about 12% of current California residences are covered by any form of earthquake insurance, down from about 30% in 1996 following the 1994, M6.7 Northridge earthquake. Part of the reason for this decreasing rate of insurance uptake is the high deductible, either 10% or 15% of the value of the structure, and the relatively high cost of the premiums, as much as thousands of dollars per year. The earthquake insurance industry is composed of the CEA, a public-private partnership; modeling companies that produce damage and loss models similar to the FEMA HAZUS model; and financial companies such as the insurance, reinsurance, and investment banking companies in New York, London, the Cayman Islands, Zurich, Dubai, Singapore, and elsewhere. In setting earthquake insurance rates, financial companies rely on models like HAZUS, that calculate on risk and exposure. In California, the process begins with an official earthquake forecast by the Working Group on California Earthquake Probabilities. Modeling companies use these 30 year earthquake probabilities as inputs to their attenuation and damage models to estimate the possible damage factors from scenario earthquakes. Economic loss is then estimated from processes such as structural failure, lost economic activity, demand surge, and fire following the earthquake. Once the potential losses are known, rates can be set so that a target ruin probability of less than 1% or so can be assured. Open Hazards Group was founded with the idea that the global public might be interested in a personal estimate of earthquake risk, computed using data supplied by the public, with models running in a cloud computing environment. These models process data from the ANSS catalog, updated at least daily, to produce rupture forecasts that are backtested with standard Reliability/Attributes and Receiver Operating Characteristic tests, among others. Models for attenuation and structural damage

  7. New algorithm to reduce the number of computing steps in reliability formula of Weighted-k-out-of-n system

    Directory of Open Access Journals (Sweden)

    Tatsunari Ohkura

    2007-02-01

    Full Text Available In the disjoint products version of reliability analysis of weighted–k–out–of–n systems, it is necessary to determine the order in which the weight of components is to be considered. The k–out–of–n:G(F system consists of n components; each com-ponent has its own probability and positive integer weight such that the system is operational (failed if and only if the total weight of some operational (failure components is at least k. This paper designs a method to compute the reliability in O(nk computing time and in O(nk memory space. The proposed method expresses the system reliability in fewer product terms than those already published.

  8. Electronic structure of BN-aromatics: Choice of reliable computational tools

    Science.gov (United States)

    Mazière, Audrey; Chrostowska, Anna; Darrigan, Clovis; Dargelos, Alain; Graciaa, Alain; Chermette, Henry

    2017-10-01

    The importance of having reliable calculation tools to interpret and predict the electronic properties of BN-aromatics is directly linked to the growing interest for these very promising new systems in the field of materials science, biomedical research, or energy sustainability. Ionization energy (IE) is one of the most important parameters to approach the electronic structure of molecules. It can be theoretically estimated, but in order to evaluate their persistence and propose the most reliable tools for the evaluation of different electronic properties of existent or only imagined BN-containing compounds, we took as reference experimental values of ionization energies provided by ultra-violet photoelectron spectroscopy (UV-PES) in gas phase—the only technique giving access to the energy levels of filled molecular orbitals. Thus, a set of 21 aromatic molecules containing B-N bonds and B-N-B patterns has been merged for a comparison between experimental IEs obtained by UV-PES and various theoretical approaches for their estimation. Time-Dependent Density Functional Theory (TD-DFT) methods using B3LYP and long-range corrected CAM-B3LYP functionals are used, combined with the Δ SCF approach, and compared with electron propagator theory such as outer valence Green's function (OVGF, P3) and symmetry adapted cluster-configuration interaction ab initio methods. Direct Kohn-Sham estimation and "corrected" Kohn-Sham estimation are also given. The deviation between experimental and theoretical values is computed for each molecule, and a statistical study is performed over the average and the root mean square for the whole set and sub-sets of molecules. It is shown that (i) Δ SCF+TDDFT(CAM-B3LYP), OVGF, and P3 are the most efficient way for a good agreement with UV-PES values, (ii) a CAM-B3LYP range-separated hybrid functional is significantly better than B3LYP for the purpose, especially for extended conjugated systems, and (iii) the "corrected" Kohn-Sham result is a

  9. Reliability of lip prints in personal identification: An inter-racial pilot study.

    Science.gov (United States)

    Kumar, Laliytha Bijai; Jayaraman, Venkatesh; Mathew, Philips; Ramasamy, S; Austin, Ravi David

    2016-01-01

    Forensic science is a branch of science that deals with the application of science and technology in solving a crime and this requires a multidisciplinary team effort. The word "Forensic" is derived from the Latin word, "Forensis" which means the study of public. Dental professionals should develop interests in contributing to legal issues. To study the lip prints among people of different races. Descriptive study. The present study comprised of ninety subjects of which Group A comprised of Africans, Group B comprised of Dravidian, and Group C of Mongoloid race. Each group was then further divided into 15 males and 15 females for whom the lip prints were recorded and evaluated. ANOVA test. ANOVA statistical analysis was used to compare three races of African, Dravidian, and Mongoloid races. The observed data among male and female were found to be significant with a P = 0.000492. The present study showed a significant difference in lip pattern among the three races. Perhaps future studies with a larger sample size and comparison between many other races may be done for better personal identification.

  10. The perceived personal control (PPC) questionnaire: reliability and validity in a sample from the United Kingdom.

    Science.gov (United States)

    McAllister, Marion; Wood, Alex M; Dunn, Graham; Shiloh, Shoshana; Todd, Chris

    2012-02-01

    Outcome measures are important assessment tools to evaluate clinical genetics services. Research suggests that perceived personal control (PPC) is an outcome valued by clinical genetics patients and clinicians. The PPC scale was developed in Hebrew to capture three dimensions of PPC: Cognitive, decisional, and behavioral control. This article reports on the first psychometric validation of the English translation of the PPC scale. Previous research has shown that the Hebrew and Dutch translations have good psychometric properties. However, the psychometric properties of the English translation have not been tested, and there is disagreement about the factor structure, with implications for how to score the measure. A total of 395 patients attending a clinical genetics appointment in the United Kingdom completed several measures at baseline, and a further 241 also completed measures at 2-4 weeks follow-up. The English language PPC has (a) a one-factor structure, (b) convergent validity with internal health locus of control (IHLC), satisfaction with life (SWL), depression, and authenticity, (c) high internal consistency (α = 0.83), and (d) sensitivity to change, being able to identify moderate changes in PPC following clinic attendance (Cohen's d = 0.40). These properties suggest the English language PPC measure is a useful tool for both clinical genetics research and for use as a Patient Reported Outcome Measure (PROM) in service evaluation. Copyright © 2011 Wiley Periodicals, Inc.

  11. Pore sub-features reproducibility in direct microscopic and Livescan images--their reliability in personal identification.

    Science.gov (United States)

    Gupta, Abhishek; Sutton, Raul

    2010-07-01

    Third level features have been reported to have equal discriminatory power as second level details in establishing personal identification. Pore area, as an extended set third level sub-feature, has been studied by minimizing possible factors that could affect pore size. The reproducibility of pore surface area has been studied using direct microscopic and 500 ppi Livescan images. Direct microscopic pore area measurements indicated that the day on which the pore area was measured had a significant impact on the measured pore area. Pore area measurement was shown to be difficult to estimate in 500 ppi Livescan measurements owing to lack of resolution. It is not possible to reliably use pore area as an identifying feature in fingerprint examination.

  12. An Amphibious Ship-To-Shore Simulation for Use on an IBM PC (Personal Computer)

    Science.gov (United States)

    1984-09-01

    CA : «< <- j Special ■ *- amphibious ship- an IBM Personal ion of the phy- he logic used analysis, and a DD | JAM 11 1473 COITION...research, for instance, wiL1 be geared toward a technically oriented person who is familiar with computers, programming and the associated logic. A...problem, often vaguely stated by the decision aaker , into precise and operational terms [Ref. Hz p.51]. The analysis begins with specification of the

  13. Strength and Reliability of Wood for the Components of Low-cost Wind Turbines: Computational and Experimental Analysis and Applications

    DEFF Research Database (Denmark)

    Mishnaevsky, Leon; Freere, Peter; Sharma, Ranjan

    2009-01-01

    of experiments and computational investigations. Low cost testing machines have been designed, and employed for the systematic analysis of different sorts of Nepali wood, to be used for the wind turbine construction. At the same time, computational micromechanical models of deformation and strength of wood......This paper reports the latest results of the comprehensive program of experimental and computational analysis of strength and reliability of wooden parts of low cost wind turbines. The possibilities of prediction of strength and reliability of different types of wood are studied in the series...... are developed, which should provide the basis for microstructure-based correlating of observable and service properties of wood. Some correlations between microstructure, strength and service properties of wood have been established....

  14. Reliability and validity of the Spanish version of the Minnesota Multiphasic Personality Inventory-Adolescent (MMPI-A).

    Science.gov (United States)

    Zubeidat, Ihab; Sierra, Juan Carlos; Salinas, José María; Rojas-García, Antonio

    2011-01-01

    The aim of this study was to determine the test-retest reliability and internal consistency of the scales of the Spanish version of the Minnesota Multiphasic Personality Inventory-Adolescent (MMPI-A; Butcher et al., 1992). Two samples of 939 and 109 Spanish adolescents ages 14 to 18 years were assessed with the MMPI-A in their school environment. The first sample responded to the inventory once, whereas the second sample responded to it on 2 occasions with a 2-week interval between sessions. Results showed no significant differences in means or variances between the first and the second test administration for most MMPI-A scales. Test-retest reliability ranged between .62 (Amorality, Ma(1)) and .92 (Immaturity, IMM); most correlations exceeded .70. Internal consistency values for the MMPI-A scales in the pretest and posttest were very similar overall. External validity of the MMPI-A was demonstrated through several significant correlations between its scales and YSR/11-18 syndromes and social interaction measures. The highest correlations were established between the Anxious/Depressed YSR/11-18 scale and other MMPI-A scales such as Schizophrenia (Sc), Welsh's Anxiety (A), Adolescent-Anxiety (A-anx) and Adolescent-Alienation (A-aln), and between the Social Avoidance and Distress Scale and the MMPI-A Adolescent-Social Discomfort (A-sod) scale.

  15. Antisocial personality disorder and psychopathy in women: a literature review on the reliability and validity of assessment instruments.

    Science.gov (United States)

    Dolan, Mairead; Völlm, Birgit

    2009-01-01

    Crime rates are low in women compared to men. The two disorders most commonly associated with offending behaviour, antisocial personality disorder (ASPD) and psychopathy, are also less prevalent in female samples. However, developments in forensic psychiatry have often ignored gender, and the utility of constructs such as psychopathy and their assessment instruments in female samples remains unclear. This article presents a review of studies looking at rates of ASPD and psychopathy and on the reliability and validity of assessment instruments of these disorders in women. Gender differences in symptom patterns will be considered. The literature seems to suggest that DSM-IV criteria for ASPD may lead to an underestimation of the prevalence of the disorder in women due to the requirement of childhood conduct disorder symptoms. The Psychopathy Checklist-Revised (PCL-R) is a valid and reliable instrument to identify psychopathy in women but there are gender differences in the factor structure and item loadings on this measure. Research to date seems to suggest a three-factor model may be most strongly supported in females. Preliminary evidence suggests the PCL-R may have some value in predicting future offending while the PCL:SV may be useful in predicting institutional violence. Clinical implications are discussed.

  16. Personal computer interface for temmperature measuring in the cutting process with turning

    International Nuclear Information System (INIS)

    Trajchevski, Neven; Filipovski, Velimir; Kuzinonovski, Mikolaj

    2004-01-01

    The computer development aided reserch systems in the investigations of the characteristics of the surface layar forms conditions for decreasing of the measuring uncertainty. Especially important is the fact that the usage of open and self made measuring systems accomplishes the demands for a total control of the research process. This paper describes an original personal computer interface which is used in the newly built computer aided reserrch system for temperatute measuring in the machining with turning. This interface consists of optically-coupled linear isolation amplifier and an analog to digital (A/D) converter. It is designed for measuring of the themo- voltage that is a generated from the natural thermocouple workpiece-cutting tool. That is achived by digitalizing the value of the thermo-voltage in data which is transmitted to the personal computer. The interface realization is a result of the research activity of the faculty of Mechanical Engineering and the Faculty of Electrical Engineering in Skopje.

  17. Use of personal computer image for processing a magnetic resonance image (MRI)

    International Nuclear Information System (INIS)

    Yamamoto, Tetsuo; Tanaka, Hitoshi

    1988-01-01

    Image processing of MR imaging was attempted by using a popular personal computer as 16-bit model. The computer processed the images on a 256 x 256 matrix and 512 x 512 matrix. The softwer languages for image-processing were those of Macro-Assembler performed by (MS-DOS). The original images, acuired with an 0.5 T superconducting machine (VISTA MR 0.5 T, Picker International) were transfered to the computer by the flexible disket. Image process are the display of image to monitor, other the contrast enhancement, the unsharped mask contrast enhancement, the various filter process, the edge detections or the color histogram was obtained in 1.6 sec to 67 sec, indicating that commercialzed personal computer had ability for routine clinical purpose in MRI-processing. (author)

  18. Survey of ANL organization plans for word processors, personal computers, workstations, and associated software

    Energy Technology Data Exchange (ETDEWEB)

    Fenske, K.R.

    1991-11-01

    The Computing and Telecommunications Division (CTD) has compiled this Survey of ANL Organization Plans for Word Processors, Personal Computers, Workstations, and Associated Software to provide DOE and Argonne with a record of recent growth in the acquisition and use of personal computers, microcomputers, and word processors at ANL. Laboratory planners, service providers, and people involved in office automation may find the Survey useful. It is for internal use only, and any unauthorized use is prohibited. Readers of the Survey should use it as a reference that documents the plans of each organization for office automation, identifies appropriate planners and other contact people in those organizations, and encourages the sharing of this information among those people making plans for organizations and decisions about office automation. The Survey supplements information in both the ANL Statement of Site Strategy for Computing Workstations and the ANL Site Response for the DOE Information Technology Resources Long-Range Plan.

  19. Survey of ANL organization plans for word processors, personal computers, workstations, and associated software. Revision 3

    Energy Technology Data Exchange (ETDEWEB)

    Fenske, K.R.

    1991-11-01

    The Computing and Telecommunications Division (CTD) has compiled this Survey of ANL Organization Plans for Word Processors, Personal Computers, Workstations, and Associated Software to provide DOE and Argonne with a record of recent growth in the acquisition and use of personal computers, microcomputers, and word processors at ANL. Laboratory planners, service providers, and people involved in office automation may find the Survey useful. It is for internal use only, and any unauthorized use is prohibited. Readers of the Survey should use it as a reference that documents the plans of each organization for office automation, identifies appropriate planners and other contact people in those organizations, and encourages the sharing of this information among those people making plans for organizations and decisions about office automation. The Survey supplements information in both the ANL Statement of Site Strategy for Computing Workstations and the ANL Site Response for the DOE Information Technology Resources Long-Range Plan.

  20. Online retrieval of patient information by asynchronous communication between general purpose computer and stand-alone personal computer

    International Nuclear Information System (INIS)

    Tsutsumi, Reiko; Takahashi, Kazuei; Sato, Toshiko; Komatani, Akio; Yamaguchi, Koichi

    1988-01-01

    Asynchronous communication was made between host (FACOM M-340) and personal computer (OLIBETTIE S-2250) to get patient's information required for RIA test registration. The retrieval system consists of a keyboad input of six numeric codes, patient's ID, and a real time reply containing six parameters for the patient. Their identified parameters are patient's name, sex, date of birth (include area), department, and out- or inpatient. Linking this program to RIA registration program for individual patient, then, operator can input name of RIA test requested. Our simple retrieval program made a useful data network between different types of host and stand-alone personal computers, and enabled us accurate and labor-saving registration for RIA test. (author)

  1. Processing of evaluated neutron data files in ENDF format on personal computers

    International Nuclear Information System (INIS)

    Vertes, P.

    1991-11-01

    A computer code package - FDMXPC - has been developed for processing evaluated data files in ENDF format. The earlier version of this package is supplemented with modules performing calculations using Reich-Moore and Adler-Adler resonance parameters. The processing of evaluated neutron data files by personal computers requires special programming considerations outlined in this report. The scope of the FDMXPC program system is demonstrated by means of numerical examples. (author). 5 refs, 4 figs, 4 tabs

  2. Usefulness and preference for tablet personal computers by medical students: are the features worth the money?

    Science.gov (United States)

    Wiese, Dawn; Atreja, Ashish; Mehta, Neil

    2008-11-06

    Tablet Personal Computers (PCs) have a huge potential in medical education due to their interactive human- computer interface and the need for anatomical diagrams, annotations, biochemistry flow charts etc. We conducted an online survey of medical students to determine their pattern of usage of the tablet features. The results revealed that the majority of medical students use the tablet features infrequently and most do not place a high value on the tablet features.

  3. Work limitations among working persons with rheumatoid arthritis: results, reliability, and validity of the work limitations questionnaire in 836 patients.

    Science.gov (United States)

    Walker, Nancy; Michaud, Kaleb; Wolfe, Frederick

    2005-06-01

    To describe workplace limitations and the validity and reliability of the Work Limitations Questionnaire (WLQ) in persons with rheumatoid arthritis (RA). A total of 836 employed persons with RA reported clinical and work related measures and completed the WLQ, a 25 item questionnaire that assesses the impact of chronic health conditions on job performance and productivity. Limitations are categorized into 4 domains: physical demands (PDS), mental demands (MDS), time management demands (TMS), and output demands (ODS), which are then used to calculate the WLQ index. Of the 836 completed WLQ, about 10% (85) could not be scored, as more than half the items in each domain were not applicable to the patient's job. Demographic and clinical variables were associated with missing WLQ scores including older age (OR 1.7, 95% CI 1.3-2.1), male sex (OR 1.9, 95% CI 1.2-3.0), and Health Assessment Questionnaire (HAQ) scores (OR 1.4, 95% CI 1.0-2.0). Work limitations were present in all work domains: PDS (27.5%), MDS (15.7%), ODS (19.4%), and TMS (28.6%), resulting in a mean WLQ index of 5.9 (SD 5.6), which corresponds to a 4.9% decrease in productivity and a 5.1% increase in work hours to compensate for productivity loss. The WLQ index was inversely associated with Medical Outcomes Study Short Form 36 (SF-36) Mental Component Score (MCS; r = -0.60) and Physical Component Score (PCS; r = -0.49). Fatigue (0.5), pain (0.46), and HAQ (0.56) were also significantly associated with the WLQ index. Weaker associations were seen with days unable to perform (0.29), days activities cut down (0.38), and annual income (-0.10). The WLQ is a reliable tool for assessing work productivity. However, persons with RA tend to select jobs that they can do with their RA limitations, with the result that the WLQ does not detect functional limitations as well as the HAQ and SF-36. The WLQ provides special information that is not available using conventional measures of assessment, and can provide helpful

  4. Functional magnetic resonance maps obtained by personal computer; Mapas de resonancia magnetica funcional obtenidos con PC

    Energy Technology Data Exchange (ETDEWEB)

    Gomez, F. j.; Manjon, J. V.; Robles, M. [Universidad Politecnica de Valencia (Spain); Marti-Bonmati, L.; Dosda, R. [Cinica Quiron. Valencia (Spain); Molla, E. [Universidad de Valencia (Spain)

    2001-07-01

    Functional magnetic resonance (fMR) is of special relevance in the analysis of certain types of brain activation. The present report describes the development of a simple software program for use with personal computers (PCs) that analyzes these images and provides functional activation maps. Activation maps are based on the temporal differences in oxyhemoglobin in tomographic images. To detect these differences, intensities registered repeatedly during brain control and activation are compared. The experiments were performed with a 1.5-Tesla MR unit. To verify the reliability of the program fMR studies were carried out in 4 healthy individuals (12 contiguous slices, 80 images per slice every 3.1 seconds for a total of 960 images). All the images were transferred to a PC and were processed pixel by pixel within each sequence to obtain an intensity/time curve. The statistical study of the results (Student's test and cross correlation analysis) made it possible to establish the activation of each pixel. The images were prepared using spatial filtering, temporal filtering, baseline correction, normalization and segmentation of the parenchyma. The postprocessing of the results involved the elimination of single pixels, superposition of an anatomical image of greater spatial resolution and anti-aliasing. The application (Xfun 1.0, Valencia, Spain) was developed in Microsoft Visual C++5.0 Developer Studio for Windows NT Workstation. As a representative example, the program took 8.2 seconds to calculate and present the results of the entire study (12 functional maps). In the motor and visual activation experiments, the activation corresponding to regions proximal to the central sulcus of the hemisphere contralateral to the hand that moved and in the occipital cortex were observed. While programs that calculate activation maps are available, the development of software for PCs running Microsoft Windows ensures several key features for its use on a daily basis: it is

  5. Interaction Entropy: A New Paradigm for Highly Efficient and Reliable Computation of Protein-Ligand Binding Free Energy.

    Science.gov (United States)

    Duan, Lili; Liu, Xiao; Zhang, John Z H

    2016-05-04

    Efficient and reliable calculation of protein-ligand binding free energy is a grand challenge in computational biology and is of critical importance in drug design and many other molecular recognition problems. The main challenge lies in the calculation of entropic contribution to protein-ligand binding or interaction systems. In this report, we present a new interaction entropy method which is theoretically rigorous, computationally efficient, and numerically reliable for calculating entropic contribution to free energy in protein-ligand binding and other interaction processes. Drastically different from the widely employed but extremely expensive normal mode method for calculating entropy change in protein-ligand binding, the new method calculates the entropic component (interaction entropy or -TΔS) of the binding free energy directly from molecular dynamics simulation without any extra computational cost. Extensive study of over a dozen randomly selected protein-ligand binding systems demonstrated that this interaction entropy method is both computationally efficient and numerically reliable and is vastly superior to the standard normal mode approach. This interaction entropy paradigm introduces a novel and intuitive conceptual understanding of the entropic effect in protein-ligand binding and other general interaction systems as well as a practical method for highly efficient calculation of this effect.

  6. Simulation of mixed bond graphs and block diagrams on personal computers using TUTSIM

    NARCIS (Netherlands)

    Beukeboom, J.J.A.J.; van Dixhoorn, J.J.; Meerman, J.W.

    1985-01-01

    The TUTSIM simulation program for continuous dynamic systems accepts (nonlinear) block diagrams, bond graphs or a free mix of both. The simulation is “hands on” interactive, providing a direct contact with the model. The implementation of the program on existing personal computers (Apple II, IBM PC)

  7. Transfer of numeric ASCII data files between Apple and IBM personal computers.

    Science.gov (United States)

    Allan, R W; Bermejo, R; Houben, D

    1986-01-01

    Listings for programs designed to transfer numeric ASCII data files between Apple and IBM personal computers are provided with accompanying descriptions of how the software operates. Details of the hardware used are also given. The programs may be easily adapted for transferring data between other microcomputers.

  8. Dissemination of Information in Developing Countries: The Personal Computer and beyond

    Science.gov (United States)

    Wong, Wai-Man

    2005-01-01

    With the blooming of information in digital format, dissemination of information is becoming a big challenge for developing countries. It is not only due to the limited provision of personal computers--in addition, the technological infrastructure and the ability to access information are also becoming major concerns in developing countries. This…

  9. Cluster Analysis of Flow Cytometric List Mode Data on a Personal Computer

    NARCIS (Netherlands)

    Bakker Schut, Tom C.; Bakker schut, T.C.; de Grooth, B.G.; Greve, Jan

    1993-01-01

    A cluster analysis algorithm, dedicated to analysis of flow cytometric data is described. The algorithm is written in Pascal and implemented on an MS-DOS personal computer. It uses k-means, initialized with a large number of seed points, followed by a modified nearest neighbor technique to reduce

  10. Inducing and measuring emotion through a multiplayer first-person shooter computer game

    NARCIS (Netherlands)

    Merkx, P.A.B.; Truong, K.P.; Neerincx, M.A.

    2007-01-01

    To develop an annotated database of spontaneous, multimodal, emotional expressions, recordings were made of facial and vocal expressions of emotions while participants were playing a multiplayer first-person shooter (fps) computer game. During a replay of the session, participants scored their own

  11. 76 FR 75887 - SEDASYS Computer-Assisted Personalized Sedation System; Ethicon Endo-Surgery, Incorporated's...

    Science.gov (United States)

    2011-12-05

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-P-0176] SEDASYS Computer-Assisted Personalized Sedation System; Ethicon Endo-Surgery, Incorporated's Petition for... system (SEDASYS) submitted by Ethicon Endo-Surgery Inc. (EES), the sponsor for SEDASYS. This meeting has...

  12. Reliability and Validity of the ‘‘Personal Well-Being Index- Cognitive Disability’’ on Mentally Retarded Students

    Directory of Open Access Journals (Sweden)

    Alireza Agha Yousefi

    2013-06-01

    Full Text Available Objective:Having a good quality of life has always been desirable for humans, and the concept of a good life and the ways of achieving it have become important over the years. Personal wellbeing is the mental component of quality of life. Thus, the current study was conducted to assess the reliability and validity of the ‘‘Personal Well-Being Index- Cognitive Disability’’ on mentally retarded students.Method:200 mentally retarded students in north districts of Tehran (districts 1, 2 and 3 were selected by systematic random sampling. The collected data using Personal Well-Being Index- Cognitive Disability was analyzed by Cronbach’s alpha coefficient for internal consistency and linear multivariate regression for construct validity.Results:Results confirmed the reliability and validity for the Personal Well-Being Index- Cognitive Disability in mentally retarded students of exceptional schools. Studying the internal consistency of seven items showed that all the items were correlated with the total score and their scores averages were similar to each other. This indicates that the test’s questions have reliability with regard to evaluation of a common feature and results showed Personal Well-Being Index- Cognitive Disability had the most extensive coverage of construct validity .Conclusion:Personal Well-Being Index- Cognitive Disability scale could be applied to measure personal wellbeing in mentally retarded students.

  13. Outpatient follow-up system using a personal computer for patients with hepatocellular carcinoma after surgery.

    Science.gov (United States)

    Itasaka, H; Matsumata, T; Taketomi, A; Yamamoto, K; Yanaga, K; Takenaka, K; Akazawa, K; Sugimachi, K

    1994-12-01

    A simple outpatient follow-up system was developed with a laptop personal computer to assist management of patients with hepatocellular carcinoma after hepatic resections. Since it is based on a non-relational database program and the graphical user interface of Macintosh operating system, those who are not a specialist of the computer operation can use it. It is helpful to promptly recognize current status and problems of the patients, to diagnose recurrences of the disease and to prevent lost from follow-up cases. A portability of the computer also facilitates utilization of these data everywhere, such as in clinical conferences and laboratories.

  14. A personal computer code for seismic evaluations of nuclear power plants facilities

    International Nuclear Information System (INIS)

    Xu, J.; Philippacopoulos, A.J.; Graves, H.

    1990-01-01

    The program CARES (Computer Analysis for Rapid Evaluation of Structures) is an integrated computational system being developed by Brookhaven National Laboratory (BNL) for the U.S. Nuclear Regulatory Commission. It is specifically designed to be a personal computer (PC) operated package which may be used to determine the validity and accuracy of analysis methodologies used for structural safety evaluations of nuclear power plants. CARES is structured in a modular format. Each module performs a specific type of analysis i.e., static or dynamic, linear or nonlinear, etc. This paper describes the various features which have been implemented into the Seismic Module of CARES

  15. In person versus computer screening for intimate partner violence among pregnant patients.

    Science.gov (United States)

    Chang, Judy C; Dado, Diane; Schussler, Sara; Hawker, Lynn; Holland, Cynthia L; Burke, Jessica G; Cluss, Patricia A

    2012-09-01

    To compare in person versus computerized screening for intimate partner violence (IPV) in a hospital-based prenatal clinic and explore women's assessment of the screening methods. We compared patient IPV disclosures on a computerized questionnaire to audio-taped first obstetric visits with an obstetric care provider and performed semi-structured interviews with patient participants who reported experiencing IPV. Two-hundred and fifty patient participants and 52 provider participants were in the study. Ninety-one (36%) patients disclosed IPV either via computer or in person. Of those who disclosed IPV, 60 (66%) disclosed via both methods, but 31 (34%) disclosed IPV via only one of the two methods. Twenty-three women returned for interviews. They recommended using both types together. While computerized screening was felt to be non-judgmental and more anonymous, in person screening allowed for tailored questioning and more emotional connection with the provider. Computerized screening allowed disclosure without fear of immediate judgment. In person screening allows more flexibility in wording of questions regarding IPV and opportunity for interpersonal rapport. Both computerized or self-completed screening and in person screening is recommended. Providers should address IPV using non-judgmental, descriptive language, include assessments for psychological IPV, and repeat screening in person, even if no patient disclosure occurs via computer. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

  16. Appraisal of the PREP, KITT, and SAMPLE computer codes for the evaluation of the reliability characteristics of engineered systems

    Energy Technology Data Exchange (ETDEWEB)

    Shaw, P; White, R F

    1976-01-01

    For the probabilistic approach to reactor safety assessment by the use of event tree and fault tree techniques it is essential to be able to estimate the probabilities of failure of the various engineered safety features provided to mitigate the effects of postulated accident sequences. The PREP, KITT and SAMPLE computer codes, which incorporate Kinetic Tree Theory, perform these calculations and have been used extensively to evaluate the reliability characteristics of engineered safety features of American nuclear reactors. Working versions of these computer codes are now available in SRD, and this report explains the merits, capabilities and ease of application of the PREP, KITT, and SAMPLE programs for the solution of system reliability problems.

  17. Geophysical data collection using an interactive personal computer system. Part 1. ; Experimental monitoring of Suwanosejima volcano

    Energy Technology Data Exchange (ETDEWEB)

    Iguchi, M. (Kyoto Univerdity, Kyoto (Japan). Disaster Prevention Reserach Institute)

    1991-10-15

    In the article, a computer-communication system was developed in order to collect geophysical data from remote volcanos via a public telephpne network. This system is composed of a host presonal computer at an observatory and several personal computers as terminals at remote stations. Each terminal acquires geophysical data, such as seismic, intrasonic, and ground deformation date. These gara are stored in the terminals temporarily, and transmitted to the host computer upon command from host computer. Experimental monitoring was conducted between Sakurajima Volcanological Observatory and several statins in the Satsunan Islands and southern Kyushu. The seismic and eruptive activities of Suwanosejima volcano were monitored by this system. Consequently, earthquakes and air-shocks accompanied by the explosive activity were observed. B-type earthquakes occurred prio to the relatively prolonged eruptive activity. Intermittent occurrences of volcanic tremors were also clearly recognized from the change in mean amplitubes of seismic waves. 7 refs., 10 figs., 2 tabs.

  18. Feasibility, Test-Retest Reliability, and Interrater Reliability of the Modified Ashworth Scale and Modified Tardieu Scale in Persons with Profound Intellectual and Multiple Disabilities

    Science.gov (United States)

    Waninge, A.; Rook, R. A.; Dijkhuizen, A.; Gielen, E.; van der Schans, C. P.

    2011-01-01

    Caregivers of persons with profound intellectual and multiple disabilities (PIMD) often describe the quality of the daily movements of these persons in terms of flexibility or stiffness. Objective outcome measures for flexibility and stiffness are muscle tone or level of spasticity. Two instruments used to grade muscle tone and spasticity are the…

  19. Feasibility, test-retest reliability, and interrater reliability of the Modified Ashworth Scale and Modified Tardieu Scale in persons with profound intellectual and multiple disabilities

    NARCIS (Netherlands)

    Waninge, A.; Rook, R.A.; Dijkhuizen, A.; Gielen, E.; van der Schans, C.P.

    2011-01-01

    Caregivers of persons with profound intellectual and multiple disabilities (PIMD) often describe the quality of the daily movements of these persons in terms of flexibility or stiffness. Objective outcome measures for flexibility and stiffness are muscle tone or level of spasticity. Two instruments

  20. FORMING SCHOOLCHILD’S PERSONALITY IN COMPUTER STUDY LESSONS AT PRIMARY SCHOOL

    Directory of Open Access Journals (Sweden)

    Natalia Salan

    2017-04-01

    Full Text Available The influence of computer on the formation of primary schoolchildren’s personality and their implementing into learning activity are considered in the article. Based on the materials of state standards and the Law of Ukraine on Higher Education the concepts “computer”, “information culture” are defined, modern understanding of the concept “basics of computer literacy” is identified. The main task of school propaedeutic course in Computer Studies is defined. Interactive methods of activity are singled out. They are didactic games, designing, research, collaboration in pairs, and group interaction, etc. The essential characteristics of didactic game technologies are distinguished, the peculiarities of their use at primary school in Computer Study lessons are analyzed. Positive and negative aspects of using these technologies in Computer Study lessons are defined. The expediency of using game technologies while organizing students’ educational and cognitive activity in Computer Studies is substantiated. The idea to create a school course “Computer Studies at primary school” is caused by the wide introduction of computer technics into the educational system. Today’s schoolchild has to be able to use a computer as freely and easily as he can use a pen, a pencil or a ruler. That’s why it is advisable to start studying basics of Computer Studies at the primary school age. This course is intended for the pupils of the 2nd-4th forms. Firstly, it provides mastering practical skills of computer work and, secondly, it anticipates the development of children’s logical and algorithmic thinking styles. At these lessons students acquire practical skills to work with information on the computer. Having mastered the computer skills at primary school, children will be able to use it successfully in their work. In senior classes they will be able to realize acquired knowledge of the methods of work with information, ways of problem solving

  1. Incorporation of personal computers in a research reactor instrumentation system for data monitoring and analysis

    International Nuclear Information System (INIS)

    Leopando, L.S.

    1998-01-01

    The research contract was implemented by obtaining off-the shelf personal computer hardware and data acquisition cards, designing the interconnection with the instrumentation system, writing and debugging the software, and the assembling and testing the set-up. The hardware was designed to allow all variables monitored by the instrumentation system to be accessible to the computers, without requiring any major modification of the instrumentation system and without compromising reactor safety in any way. The computer hardware addition was also designed to have no effect on any existing function of the instrumentation system. The software was designed to implement only graphical display and automated logging of reactor variables. Additional functionality could be easily added in the future with software revision because all the reactor variables are already available in the computer. It would even be possible to ''close the loop'' and control the reactor through software. It was found that most of the effort in an undertaking of this sort will be in software development, but the job can be done even by non-computer specialized reactor people working with programming languages they are already familiar with. It was also found that the continuing rapid advance of personal computer technology makes it essential that such a project be undertaken with inevitability of future hardware upgrading in mind. The hardware techniques and the software developed may find applicability in other research reactors, especially those with a generic analog research reactor TRIGA console. (author)

  2. The image database management system of teaching file using personal computer

    International Nuclear Information System (INIS)

    Shin, M. J.; Kim, G. W.; Chun, T. J.; Ahn, W. H.; Baik, S. K.; Choi, H. Y.; Kim, B. G.

    1995-01-01

    For the systemic management and easy using of teaching file in radiology department, the authors tried to do the setup of a database management system of teaching file using personal computer. We used a personal computer (IBM PC compatible, 486DX2) including a image capture card(Window vision, Dooin Elect, Seoul, Korea) and video camera recorder (8mm, CCD-TR105, Sony, Tokyo, Japan) for the acquisition and storage of images. We developed the database program by using Foxpro for Window 2.6(Microsoft, Seattle, USA) executed in the Window 3.1 (Microsoft, Seattle, USA). Each datum consisted of hospital number, name, sex, age, examination date, keyword, radiologic examination modalities, final diagnosis, radiologic findings, references and representative images. The images were acquired and stored as bitmap format (8 bitmap, 540 X 390 ∼ 545 X 414, 256 gray scale) and displayed on the 17 inch-flat monitor(1024 X 768, Samtron, Seoul, Korea). Without special devices, the images acquisition and storage could be done on the reading viewbox, simply. The image quality on the computer's monitor was less than the one of original film on the viewbox, but generally the characteristics of each lesions could be differentiated. Easy retrieval of data was possible for the purpose of teaching file system. Without high cost appliances, we could consummate the image database system of teaching file using personal computer with relatively inexpensive method

  3. Personal Publications Lists Serve as a Reliable Calibration Parameter to Compare Coverage in Academic Citation Databases with Scientific Social Media

    Directory of Open Access Journals (Sweden)

    Emma Hughes

    2017-03-01

    lowest was WoS with an average of 15%. On social media sites, Bibsonomy had the highest coverage with an average of 24%, Mendeley had an average coverage of 19%, and the lowest coverage was CiteULike with an average of 8%. Conclusion – The use of personal publication lists are reliable calibration parameters to compare coverage of information scientists in academic citation databases with scientific social media. Academic citation databases had a higher coverage of publications, in particular, Google Scholar, compared to scientific social media sites. The authors recommend that information scientists personally publish work on social media citation databases to increase exposure. Formulating a publication strategy may be useful to identify journals with the most exposure in academic citation databases. Individuals should be encouraged to keep personal publication lists and these can be used as calibration parameters as a measure of coverage in the future.

  4. [Evaluation of a registration card for logging electrocardiographic records into standard personal computers].

    Science.gov (United States)

    Pizzuti, A; Baralis, G; Bassignana, A; Antonielli, E; Di Leo, M

    1997-01-01

    The MS200 Cardioscope, from MRT Micro as., Norway, is a 12 channel ECG card to be directly inserted into a standard personal computer (PC). The standard ISA Bus compatible half length card comes with a set of 10 cables with electrodes and the software for recording, displaying and saving ECG signals. The system is supplied with DOS or Windows software. The goal of the present work was to evaluate the affordability and usability of the MS200 in a clinical setting. We tested the 1.5 DOS version of the software. In 30 patients with various cardiac diseases the ECG signal has been recorded with MS200 and with standard Hellige CardioSmart equipment. The saved ECGs were recalled and printed using an Epson Stylus 800 ink-jet printer. Two cardiologists reviewed the recordings for a looking at output quality, amplitude and speed precision, artifacts, etc. 1) Installation: the card has proven to be totally compatible with the hardware; no changes in default settings had to be made. 2) Usage: the screens are clear; the commands and menus are intuitive and easy to use. Due to the boot-strap and software loading procedures and, most important, off-line printing, the time needed to obtain a complete ECG printout has been longer than that of the reference machine. 3) Archiving and retrieval of ECG: the ECG curves can be saved in original or compressed form: selecting the latter, the noise and non-ECG information is filtered away and the space consumption on disk is reduced: on average, 20 Kb are needed for 10 seconds of signal. The MS200 can be run on a Local Area Network and is prepared for integrating with an existing informative system: we are currently testing the system in this scenery. 4) MS200 includes options for on-line diagnosis, a technology we have not tested in the present work. 5) The only setting allowed for printing full pages is letter size (A4): the quality of printouts is good, with a resolution of 180 DPI. In conclusion, the MS200 system seems reliable and

  5. Reliability of a computer software angle tool for measuring spine and pelvic flexibility during the sit-and-reach test.

    Science.gov (United States)

    Mier, Constance M; Shapiro, Belinda S

    2013-02-01

    The purpose of this study was to determine the reliability of a computer software angle tool that measures thoracic (T), lumbar (L), and pelvic (P) angles as a means of evaluating spine and pelvic flexibility during the sit-and-reach (SR) test. Thirty adults performed the SR twice on separate days. The SR test was captured on video and later analyzed for T, L, and P angles using the computer software angle tool. During the test, 3 markers were placed over T1, T12, and L5 vertebrae to identify T, L, and P angles. Intraclass correlation coefficient (ICC) indicated a very high internal consistency (between trials) for T, L, and P angles (0.95-0.99); thus, the average of trials was used for test-retest (between days) reliability. Mean (±SD) values did not differ between days for T (51.0 ± 14.3 vs. 52.3 ± 16.2°), L (23.9 ± 7.1 vs. 23.0 ± 6.9°), or P (98.4 ± 15.6 vs. 98.3 ± 14.7°) angles. Test-retest reliability (ICC) was high for T (0.96) and P (0.97) angles and moderate for L angle (0.84). Both intrarater and interrater reliabilities were high for T (0.95, 0.94) and P (0.97, 0.97) angles and moderate for L angle (0.87, 0.82). Thus, the computer software angle tool is a highly objective method for assessing spine and pelvic flexibility during a video-captured SR test.

  6. Accuracy and reliability of facial soft tissue depth measurements using cone beam computer tomography

    NARCIS (Netherlands)

    Fourie, Zacharias; Damstra, Janalt; Gerrits, Pieter; Ren, Yijin

    2010-01-01

    It is important to have accurate and reliable measurements of soft tissue thickness for specific landmarks of the face and scalp when producing a facial reconstruction. In the past several methods have been created to measure facial soft tissue thickness (FSTT) in cadavers and in the living. The

  7. Computational intelligence methods for the efficient reliability analysis of complex flood defence structures

    NARCIS (Netherlands)

    Kingston, Greer B.; Rajabali Nejad, Mohammadreza; Gouldby, Ben P.; van Gelder, Pieter H.A.J.M.

    2011-01-01

    With the continual rise of sea levels and deterioration of flood defence structures over time, it is no longer appropriate to define a design level of flood protection, but rather, it is necessary to estimate the reliability of flood defences under varying and uncertain conditions. For complex

  8. Informatics in Radiology (infoRAD): personal computer security: part 2. Software Configuration and file protection.

    Science.gov (United States)

    Caruso, Ronald D

    2004-01-01

    Proper configuration of software security settings and proper file management are necessary and important elements of safe computer use. Unfortunately, the configuration of software security options is often not user friendly. Safe file management requires the use of several utilities, most of which are already installed on the computer or available as freeware. Among these file operations are setting passwords, defragmentation, deletion, wiping, removal of personal information, and encryption. For example, Digital Imaging and Communications in Medicine medical images need to be anonymized, or "scrubbed," to remove patient identifying information in the header section prior to their use in a public educational or research environment. The choices made with respect to computer security may affect the convenience of the computing process. Ultimately, the degree of inconvenience accepted will depend on the sensitivity of the files and communications to be protected and the tolerance of the user. Copyright RSNA, 2004

  9. Reliability and Validity of the Computerized Revised Token Test: Comparison of Reading and Listening Versions in Persons with and without Aphasia

    Science.gov (United States)

    McNeil, Malcolm R.; Pratt, Sheila R.; Szuminsky, Neil; Sung, Jee Eun; Fossett, Tepanta R. D.; Fassbinder, Wiltrud; Lim, Kyoung Yuel

    2015-01-01

    Purpose: This study assessed the reliability and validity of intermodality associations and differences in persons with aphasia (PWA) and healthy controls (HC) on a computerized listening and 3 reading versions of the Revised Token Test (RTT; McNeil & Prescott, 1978). Method: Thirty PWA and 30 HC completed the test versions, including a…

  10. Short-interval test-retest interrater reliability of the Dutch version of the structured clinical interview for DSM-IV personality disorders (SCID-II)

    NARCIS (Netherlands)

    Weertman, A; ArntZ, A; Dreessen, L; van Velzen, C; Vertommen, S

    2003-01-01

    This study examined the short-interval test-retest reliability of the Structured Clinical Interview (SCID-II: First, Spitzer, Gibbon, & Williams, 1995) for DSM-IV personality disorders (PDs). The SCID-II was administered to 69 in- and outpatients on two occasions separated by 1 to 6 weeks. The

  11. Evaluation of the reliability concerning the identification of human factors as contributing factors by a computer supported event analysis (CEA)

    International Nuclear Information System (INIS)

    Wilpert, B.; Maimer, H.; Loroff, C.

    2000-01-01

    The project's objectives are the evaluation of the reliability concerning the identification of Human Factors as contributing factors by a computer supported event analysis (CEA). CEA is a computer version of SOL (Safety through Organizational Learning). Parts of the first step were interviews with experts from the nuclear power industry and the evaluation of existing computer supported event analysis methods. This information was combined to a requirement profile for the CEA software. The next step contained the implementation of the software in an iterative process of evaluation. The completion of this project was the testing of the CEA software. As a result the testing demonstrated that it is possible to identify contributing factors with CEA validly. In addition, CEA received a very positive feedback from the experts. (orig.) [de

  12. ANCON: A code for the evaluation of complex fault trees in personal computers

    International Nuclear Information System (INIS)

    Napoles, J.G.; Salomon, J.; Rivero, J.

    1990-01-01

    Performing probabilistic safety analysis has been recognized worldwide as one of the more effective ways for further enhancing safety of Nuclear Power Plants. The evaluation of fault trees plays a fundamental role in these analysis. Some existing limitations in RAM and execution speed of personal computers (PC) has restricted so far their use in the analysis of complex fault trees. Starting from new approaches in the data structure and other possibilities the ANCON code can evaluate complex fault trees in a PC, allowing the user to do a more comprehensive analysis of the considered system in reduced computing time

  13. Obstetrical ultrasound data-base management system by using personal computer

    International Nuclear Information System (INIS)

    Jeon, Hae Jeong; Park, Jeong Hee; Kim, Soo Nyung

    1993-01-01

    A computer program which performs obstetric calculations on Clipper Language using the data from ultrasonography was developed for personal computer. It was designed for fast assessment of fetal development, prediction of gestational age, and weight from ultrasonographic measurements which included biparietal diameter, femur length, gestational sac, occipito-frontal diameter, abdominal diameter, and etc. The Obstetrical-Ultrasound Data-Base Management System was tested for its performance. The Obstetrical-Ultrasound Data-Base Management System was very useful in patient management with its convenient data filing, easy retrieval of previous report, prompt but accurate estimation of fetal growth and skeletal anomaly and production of equation and growth curve for pregnant women

  14. Application of a personal computer in a high energy physics experiment

    International Nuclear Information System (INIS)

    Petta, P.

    1987-04-01

    UA1 is a detector block at the CERN Super Synchrotron Collider, MacVEE is Micro computer applied to the Control of VME Electronic Equipment, a software development system for the data readout system and for the implementation of the user interface of the experiment control. A commercial personal computer is used. Examples of applications are the Data Acquisition Console, the Scanner Desc equipment and the AMERICA Ram Disks codes. Further topics are the MacUA1 development system for M68K-VME codes and an outline of the future MacVEE System Supervisor. 23 refs., 10 figs., 3 tabs. (qui)

  15. A Five-Year Hedonic Price Breakdown for Desktop Personal Computer Attributes in Brazil

    Directory of Open Access Journals (Sweden)

    Nuno Manoel Martins Dias Fouto

    2009-07-01

    Full Text Available The purpose of this article is to identify the attributes that discriminate the prices of personal desktop computers. We employ the hedonic price method in evaluating such characteristics. This approach allows market prices to be expressed as a function, a set of attributes present in the products and services offered. Prices and characteristics of up to 3,779 desktop personal computers offered in the IT pages of one of the main Brazilian newspapers were collected from January 2003 to December 2007. Several specifications for the hedonic (multivariate linear regression were tested. In this particular study, the main attributes were found to be hard drive capacity, screen technology, main board brand, random memory size, microprocessor brand, video board memory, digital video and compact disk recording devices, screen size and microprocessor speed. These results highlight the novel contribution of this study: the manner and means in which hedonic price indexes may be estimated in Brazil.

  16. PCTRAN-3: The third generation of personal computer-based plant analyzer for severe accident management

    International Nuclear Information System (INIS)

    Li-Chi Cliff Po; Link, John M.

    2004-01-01

    PCTRAN is a plant analyzer that uses a personal computer to simulate plant response. The plant model is recently expanded to accommodate beyond design-basis severe accidents. In the event of multiple failures of the plant safety systems, the core may experience heatup and extensive failure. Using a high-powered personal computer (PC), PCTRAN-3 is designed to operate at a speed significantly faster than real-time. A convenient, interactive and user-friendly graphics interface allows full control by the operator. The plant analyzer is intended for use in severe accident management. In this paper the code's component models and sample runs ranging from normal operational transients to severe accidents are reviewed. (author)

  17. Data acquisition with the personal computer to the microwaves generator of the microtron MT-25

    International Nuclear Information System (INIS)

    Rivero Ramirez, D.; Benavides Benitez, J. I.; Quiles Latorre, F. J.; Pahor, J.; Ponikvar, D.; Lago, G.

    2000-01-01

    The following paper includes the description of the design, construction and completion of a data acquisition system. The system is destined to the sampling of the work parameters of the generator of microwaves of the Microtron-25 that will settle in the High Institute of Nuclear Sciences and Technology, Havana, Cuba. In order to guarantee the suitable operation of the system a monitor program in assembler language has been developed. This program allows the communication of the system with one personal computer through the interface RS-232, as well as executes the commands received through it. Also the development of a program of attention to the system from one personal computer using the methods of the virtual instrumentation is included in this paper

  18. Computer-based versus in-person interventions for preventing and reducing stress in workers.

    Science.gov (United States)

    Kuster, Anootnara Talkul; Dalsbø, Therese K; Luong Thanh, Bao Yen; Agarwal, Arnav; Durand-Moreau, Quentin V; Kirkehei, Ingvild

    2017-08-30

    Chronic exposure to stress has been linked to several negative physiological and psychological health outcomes. Among employees, stress and its associated effects can also result in productivity losses and higher healthcare costs. In-person (face-to-face) and computer-based (web- and mobile-based) stress management interventions have been shown to be effective in reducing stress in employees compared to no intervention. However, it is unclear if one form of intervention delivery is more effective than the other. It is conceivable that computer-based interventions are more accessible, convenient, and cost-effective. To compare the effects of computer-based interventions versus in-person interventions for preventing and reducing stress in workers. We searched CENTRAL, MEDLINE, PubMed, Embase, PsycINFO, NIOSHTIC, NIOSHTIC-2, HSELINE, CISDOC, and two trials registers up to February 2017. We included randomised controlled studies that compared the effectiveness of a computer-based stress management intervention (using any technique) with a face-to-face intervention that had the same content. We included studies that measured stress or burnout as an outcome, and used workers from any occupation as participants. Three authors independently screened and selected 75 unique studies for full-text review from 3431 unique reports identified from the search. We excluded 73 studies based on full-text assessment. We included two studies. Two review authors independently extracted stress outcome data from the two included studies. We contacted study authors to gather additional data. We used standardised mean differences (SMDs) with 95% confidence intervals (CIs) to report study results. We did not perform meta-analyses due to variability in the primary outcome and considerable statistical heterogeneity. We used the GRADE approach to rate the quality of the evidence. Two studies met the inclusion criteria, including a total of 159 participants in the included arms of the studies

  19. Improvement of level-1 PSA computer code package - Modeling and analysis for dynamic reliability of nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Chang Hoon; Baek, Sang Yeup; Shin, In Sup; Moon, Shin Myung; Moon, Jae Phil; Koo, Hoon Young; Kim, Ju Shin [Seoul National University, Seoul (Korea, Republic of); Hong, Jung Sik [Seoul National Polytechnology University, Seoul (Korea, Republic of); Lim, Tae Jin [Soongsil University, Seoul (Korea, Republic of)

    1996-08-01

    The objective of this project is to develop a methodology of the dynamic reliability analysis for NPP. The first year`s research was focused on developing a procedure for analyzing failure data of running components and a simulator for estimating the reliability of series-parallel structures. The second year`s research was concentrated on estimating the lifetime distribution and PM effect of a component from its failure data in various cases, and the lifetime distribution of a system with a particular structure. Computer codes for performing these jobs were also developed. The objectives of the third year`s research is to develop models for analyzing special failure types (CCFs, Standby redundant structure) that were nor considered in the first two years, and to complete a methodology of the dynamic reliability analysis for nuclear power plants. The analysis of failure data of components and related researches for supporting the simulator must be preceded for providing proper input to the simulator. Thus this research is divided into three major parts. 1. Analysis of the time dependent life distribution and the PM effect. 2. Development of a simulator for system reliability analysis. 3. Related researches for supporting the simulator : accelerated simulation analytic approach using PH-type distribution, analysis for dynamic repair effects. 154 refs., 5 tabs., 87 figs. (author)

  20. ENDF/B Pre-Processing Codes: Implementing and testing on a Personal Computer

    International Nuclear Information System (INIS)

    McLaughlin, P.K.

    1987-05-01

    This document describes the contents of the diskettes containing the ENDF/B Pre-Processing codes by D.E. Cullen, and example data for use in implementing and testing these codes on a Personal Computer of the type IBM-PC/AT. Upon request the codes are available from the IAEA Nuclear Data Section, free of charge, on a series of 7 diskettes. (author)

  1. Application of a portable briefcase personal computer to research reactor safeguards

    International Nuclear Information System (INIS)

    Ryan, R.D.

    1985-01-01

    The Kookaburra Portable Briefcase Personal Computer (PBPC) has been applied to safeguards inspections at the HIFAR research reactor. A complete portable measuring system provides for non-destructive assay on both fresh and spent fuel. Application programs developed for the PBPC make it possible to immediately analyse the results of the measurements to verify the amounts of nuclear material declared by the operator. This contributes significantly to meeting the essential safeguards criteria of timely detection of diversion

  2. Application of personal computers to study the kinetics of heterogeneous isotopic exchange

    International Nuclear Information System (INIS)

    Koernyei, Jozsef; Lakatos, Mihaly

    1985-01-01

    The kinetics of some heterogeneous isotopic exchange reactions of alkaline metal ions between solid (crystalline zirconium phosphate) and liquid phases were investigated. Ion diffusion in solid phase was considered as rate controlling step. The Laplace transformation solution of Fick's II law was used with a Sinclair ZX Spectrum personal computer. In some cases the exchange reaction should be regarded as a superposition of diffusion and a first order process. (author)

  3. Different perspectives on the use of personal computers for technical analyses

    International Nuclear Information System (INIS)

    Libby, R.A.; Doherty, A.L.

    1986-01-01

    Personal computers (PCs) have widespread availability and use in many technical environments. The machines may have initially been justified for use as word processors or for data base management, but many technical applications are being performed and often the computer codes used in these technical analyses have been moved from large mainframe machines. The general feeling in the user community is that the free computer time on these machines justifies moving as many applications as possible from the large computer systems. Many of these PC applications cannot be justified if the total cost of using microcomputers is considered. A Hanford-wide local area network (LAN) is being established which allows individual PCs to be used as terminals to connect to mainframe computers at high data transfer rates (9600 baud). This system allows fast, easy connection to a variety of different computers with a few keystrokes. The LAN eliminates the problem of low-speed communication with mainframe computers and makes operation on the mainframes as simple as operation on the host PC, itself

  4. Programmed temperature control of capsule in irradiation test with personal computer at JMTR

    International Nuclear Information System (INIS)

    Saito, H.; Uramoto, T.; Fukushima, M.; Obata, M.; Suzuki, S.; Nakazaki, C.; Tanaka, I.

    1992-01-01

    The capsule irradiation facility is one of various equipments employed at the Japan Materials Testing Reactor (JMTR). The capsule facility has been used in irradiation tests of both nuclear fuels and materials. The capsule to be irradiated consists of the specimen, the outer tube and inner tube with a annular space between them. The temperature of the specimen is controlled by varying the degree of pressure (below the atmospheric pressure) of He gas in the annular space (vacuum-controlled). Beside this, in another system the temperature of the specimen is controlled with electric heaters mounted around the specimen (heater-controlled). The use of personal computer in the capsule facility has led to the development of a versatile temperature control system at the JMTR. Features of this newly-developed temperature control system lie in the following: the temperature control mode for a operation period can be preset prior to the operation; and the vacuum-controlled irradiation facility can be used in cooperation with the heater-controlled. The introduction of personal computer has brought in automatic heat-up and cool-down operations of the capsule, setting aside the hand-operated jobs which had been conducted by the operators. As a result of this, the various requirements seeking a higher accuracy and efficiency in the irradiation can be met by fully exploiting the capabilities incorporated into the facility which allow the cyclic or delicate changes in the temperature. This paper deals with a capsule temperature control system with personal computer. (author)

  5. Calculation of transmission and other functionals from evaluated data in ENDF format by means of personal computers

    International Nuclear Information System (INIS)

    Vertes, P.

    1991-04-01

    The FDMXPC program package was developed on the basis of the program system FEDMIX written for mainframe computers. The new program package for personal computers was developed for the interpretation of neutron transmission experiments and for producing group averaged infinite diluted and self-shielded cross sections, starting from evaluated data in ENDF format. The package was written for different FORTRAN compilers residing in personal computers under MS-DOS. (R.P.) 12 refs

  6. Analysis of Brand Personality on Customer Loyalty (Case Study Tablet Computer: Apple Ipad and Samsung Galaxy Tab)

    OpenAIRE

    Andu, Risca A.

    2013-01-01

    Brand personality is a potential marketing strategy to increase the customer loyalty towards the particular brand. Many customers will choose products with a brand that suitable with their personality. It also applies to tablet computer customers. The objectives of this research are to describe the effect of brand personality on customer loyalty in purchasing Apple Ipad and Samsung Galaxy Tab. This research also will analyze the difference in customer loyalty based on brand personality betwee...

  7. Optimal design methods for a digital human-computer interface based on human reliability in a nuclear power plant

    International Nuclear Information System (INIS)

    Jiang, Jianjun; Zhang, Li; Xie, Tian; Wu, Daqing; Li, Min; Wang, Yiqun; Peng, Yuyuan; Peng, Jie; Zhang, Mengjia; Li, Peiyao; Ma, Congmin; Wu, Xing

    2017-01-01

    Highlights: • A complete optimization process is established for digital human-computer interfaces of Npps. • A quick convergence search method is proposed. • The authors propose an affinity error probability mapping function to test human reliability. - Abstract: This is the second in a series of papers describing the optimal design method for a digital human-computer interface of nuclear power plant (Npp) from three different points based on human reliability. The purpose of this series is to explore different optimization methods from varying perspectives. This present paper mainly discusses the optimal design method for quantity of components of the same factor. In monitoring process, quantity of components has brought heavy burden to operators, thus, human errors are easily triggered. To solve the problem, the authors propose an optimization process, a quick convergence search method and an affinity error probability mapping function. Two balanceable parameter values of the affinity error probability function are obtained by experiments. The experimental results show that the affinity error probability mapping function about human-computer interface has very good sensitivity and stability, and that quick convergence search method for fuzzy segments divided by component quantity has better performance than general algorithm.

  8. Design and implementation of a reliable and cost-effective cloud computing infrastructure: the INFN Napoli experience

    International Nuclear Information System (INIS)

    Capone, V; Esposito, R; Pardi, S; Taurino, F; Tortone, G

    2012-01-01

    Over the last few years we have seen an increasing number of services and applications needed to manage and maintain cloud computing facilities. This is particularly true for computing in high energy physics, which often requires complex configurations and distributed infrastructures. In this scenario a cost effective rationalization and consolidation strategy is the key to success in terms of scalability and reliability. In this work we describe an IaaS (Infrastructure as a Service) cloud computing system, with high availability and redundancy features, which is currently in production at INFN-Naples and ATLAS Tier-2 data centre. The main goal we intended to achieve was a simplified method to manage our computing resources and deliver reliable user services, reusing existing hardware without incurring heavy costs. A combined usage of virtualization and clustering technologies allowed us to consolidate our services on a small number of physical machines, reducing electric power costs. As a result of our efforts we developed a complete solution for data and computing centres that can be easily replicated using commodity hardware. Our architecture consists of 2 main subsystems: a clustered storage solution, built on top of disk servers running GlusterFS file system, and a virtual machines execution environment. GlusterFS is a network file system able to perform parallel writes on multiple disk servers, providing this way live replication of data. High availability is also achieved via a network configuration using redundant switches and multiple paths between hypervisor hosts and disk servers. We also developed a set of management scripts to easily perform basic system administration tasks such as automatic deployment of new virtual machines, adaptive scheduling of virtual machines on hypervisor hosts, live migration and automated restart in case of hypervisor failures.

  9. Design and implementation of a reliable and cost-effective cloud computing infrastructure: the INFN Napoli experience

    Science.gov (United States)

    Capone, V.; Esposito, R.; Pardi, S.; Taurino, F.; Tortone, G.

    2012-12-01

    Over the last few years we have seen an increasing number of services and applications needed to manage and maintain cloud computing facilities. This is particularly true for computing in high energy physics, which often requires complex configurations and distributed infrastructures. In this scenario a cost effective rationalization and consolidation strategy is the key to success in terms of scalability and reliability. In this work we describe an IaaS (Infrastructure as a Service) cloud computing system, with high availability and redundancy features, which is currently in production at INFN-Naples and ATLAS Tier-2 data centre. The main goal we intended to achieve was a simplified method to manage our computing resources and deliver reliable user services, reusing existing hardware without incurring heavy costs. A combined usage of virtualization and clustering technologies allowed us to consolidate our services on a small number of physical machines, reducing electric power costs. As a result of our efforts we developed a complete solution for data and computing centres that can be easily replicated using commodity hardware. Our architecture consists of 2 main subsystems: a clustered storage solution, built on top of disk servers running GlusterFS file system, and a virtual machines execution environment. GlusterFS is a network file system able to perform parallel writes on multiple disk servers, providing this way live replication of data. High availability is also achieved via a network configuration using redundant switches and multiple paths between hypervisor hosts and disk servers. We also developed a set of management scripts to easily perform basic system administration tasks such as automatic deployment of new virtual machines, adaptive scheduling of virtual machines on hypervisor hosts, live migration and automated restart in case of hypervisor failures.

  10. Assessing movement quality in persons with severe mental illness - Reliability and validity of the Body Awareness Scale Movement Quality and Experience.

    Science.gov (United States)

    Hedlund, Lena; Gyllensten, Amanda Lundvik; Waldegren, Tomas; Hansson, Lars

    2016-05-01

    Motor disturbances and disturbed self-recognition are common features that affect mobility in persons with schizophrenia spectrum disorder and bipolar disorder. Physiotherapists in Scandinavia assess and treat movement difficulties in persons with severe mental illness. The Body Awareness Scale Movement Quality and Experience (BAS MQ-E) is a new and shortened version of the commonly used Body Awareness Scale-Health (BAS-H). The purpose of this study was to investigate the inter-rater reliability and the concurrent validity of BAS MQ-E in persons with severe mental illness. The concurrent validity was examined by investigating the relationships between neurological soft signs, alexithymia, fatigue, anxiety, and mastery. Sixty-two persons with severe mental illness participated in the study. The results showed a satisfactory inter-rater reliability (n = 53) and a concurrent validity (n = 62) with neurological soft signs, especially cognitive and perceptual based signs. There was also a concurrent validity linked to physical fatigue and aspects of alexithymia. The scores of BAS MQ-E were in general higher for persons with schizophrenia compared to persons with other diagnoses within the schizophrenia spectrum disorders and bipolar disorder. The clinical implications are presented in the discussion.

  11. Survey of ANL organization plans for word processors, personal computers, workstations, and associated software

    Energy Technology Data Exchange (ETDEWEB)

    Fenske, K.R.; Rockwell, V.S.

    1992-08-01

    The Computing and Telecommunications Division (CTD) has compiled this Survey of ANL Organization plans for Word Processors, Personal Computers, Workstations, and Associated Software (ANL/TM, Revision 4) to provide DOE and Argonne with a record of recent growth in the acquisition and use of personal computers, microcomputers, and word processors at ANL. Laboratory planners, service providers, and people involved in office automation may find the Survey useful. It is for internal use only, and any unauthorized use is prohibited. Readers of the Survey should use it as a reference document that (1) documents the plans of each organization for office automation, (2) identifies appropriate planners and other contact people in those organizations and (3) encourages the sharing of this information among those people making plans for organizations and decisions about office automation. The Survey supplements information in both the ANL Statement of Site Strategy for Computing Workstations (ANL/TM 458) and the ANL Site Response for the DOE Information Technology Resources Long-Range Plan (ANL/TM 466).

  12. Survey of ANL organization plans for word processors, personal computers, workstations, and associated software. Revision 4

    Energy Technology Data Exchange (ETDEWEB)

    Fenske, K.R.; Rockwell, V.S.

    1992-08-01

    The Computing and Telecommunications Division (CTD) has compiled this Survey of ANL Organization plans for Word Processors, Personal Computers, Workstations, and Associated Software (ANL/TM, Revision 4) to provide DOE and Argonne with a record of recent growth in the acquisition and use of personal computers, microcomputers, and word processors at ANL. Laboratory planners, service providers, and people involved in office automation may find the Survey useful. It is for internal use only, and any unauthorized use is prohibited. Readers of the Survey should use it as a reference document that (1) documents the plans of each organization for office automation, (2) identifies appropriate planners and other contact people in those organizations and (3) encourages the sharing of this information among those people making plans for organizations and decisions about office automation. The Survey supplements information in both the ANL Statement of Site Strategy for Computing Workstations (ANL/TM 458) and the ANL Site Response for the DOE Information Technology Resources Long-Range Plan (ANL/TM 466).

  13. Analysis of cardiac images of radionuclide ventriculography in AT-Type personal computer

    International Nuclear Information System (INIS)

    Lillo, R.; Gonzalez, P.; Ehijo, A.; Otarola, T.M.S.; Ortiz, M.; Silva, A.M.; Ortiz, M.

    1990-01-01

    The goal of this research was to produce software for the processing of Cardiac Phase images in personal computers. The results of standard radionuclide Ventriculography and Fourier analysis, got on gamma camera Ohio Nuclear 410 Sygma and Digital PDP 11/34 computer were coded into ASCII file and then transfered via Smarterm 220/Kermit to an Accel 900 AT PC. After decoding the images they were processed with a program develope in C Lenguaje obtaining the values of Phase Angles in the whole phase images and in regions of interest drawn around the cardiac chambers. The images and values were the same as those obtained by conventional processing in the PDP 11/34 computer. This is considered a first stage for the use of PC to Nuclear Medicine imaging studies. (author)

  14. Beyond redundancy how geographic redundancy can improve service availability and reliability of computer-based systems

    CERN Document Server

    Bauer, Eric; Eustace, Dan

    2012-01-01

    "While geographic redundancy can obviously be a huge benefit for disaster recovery, it is far less obvious what benefit is feasible and likely for more typical non-catastrophic hardware, software, and human failures. Georedundancy and Service Availability provides both a theoretical and practical treatment of the feasible and likely benefits of geographic redundancy for both service availability and service reliability. The text provides network/system planners, IS/IT operations folks, system architects, system engineers, developers, testers, and other industry practitioners with a general discussion about the capital expense/operating expense tradeoff that frames system redundancy and georedundancy"--

  15. SALP (Sensitivity Analysis by List Processing), a computer assisted technique for binary systems reliability analysis

    International Nuclear Information System (INIS)

    Astolfi, M.; Mancini, G.; Volta, G.; Van Den Muyzenberg, C.L.; Contini, S.; Garribba, S.

    1978-01-01

    A computerized technique which allows the modelling by AND, OR, NOT binary trees, of various complex situations encountered in safety and reliability assessment, is described. By the use of list-processing, numerical and non-numerical types of information are used together. By proper marking of gates and primary events, stand-by systems, common cause failure and multiphase systems can be analyzed. The basic algorithms used in this technique are shown in detail. Application to a stand-by and multiphase system is then illustrated

  16. A Context-Aware Ubiquitous Learning Approach for Providing Instant Learning Support in Personal Computer Assembly Activities

    Science.gov (United States)

    Hsu, Ching-Kun; Hwang, Gwo-Jen

    2014-01-01

    Personal computer assembly courses have been recognized as being essential in helping students understand computer structure as well as the functionality of each computer component. In this study, a context-aware ubiquitous learning approach is proposed for providing instant assistance to individual students in the learning activity of a…

  17. Inverse kinetics equations for on line measurement of reactivity using personal computer

    International Nuclear Information System (INIS)

    Ratemi, Wajdi; El Gadamsi, Walied; Beleid, Abdul Kariem

    1993-01-01

    Computer with their astonishing speed of calculations along with their easy connection to real systems, are very appropriate for digital measurements of real system variables. In the nuclear industry, such computer application will produce compact control rooms of real power plants, where information and results display can be obtained through push button concept. In our study, we use two personal computers for the purpose of simulation and measurement. One of them is used as a digital simulator to a real reactor, where we effectively simulate the reactor power through a cross talk network. The computed power is passed at certain chosen sampling time to the other computer. The purpose of the other computer is to use the inverse kinetics equations to calculate the reactivity parameter based on the received power and then it performs on line display of the power curve and the reactivity curve using color graphics. In this study, we use the one group version of the inverse kinetics algorithm which can easily be extended to larger group version. The language of programming used in Turbo BASIC, which is very comparable, in terms of efficiency, to FORTRAN language, besides its effective graphics routines. With the use of the extended version of the Inverse Kinetics algorithm, we can effectively apply this techniques of measurement for the purpose of on line display of the reactivity of the Tajoura Research Reactor. (author)

  18. Ergonomic guidelines for using notebook personal computers. Technical Committee on Human-Computer Interaction, International Ergonomics Association.

    Science.gov (United States)

    Saito, S; Piccoli, B; Smith, M J; Sotoyama, M; Sweitzer, G; Villanueva, M B; Yoshitake, R

    2000-10-01

    In the 1980's, the visual display terminal (VDT) was introduced in workplaces of many countries. Soon thereafter, an upsurge in reported cases of related health problems, such as musculoskeletal disorders and eyestrain, was seen. Recently, the flat panel display or notebook personal computer (PC) became the most remarkable feature in modern workplaces with VDTs and even in homes. A proactive approach must be taken to avert foreseeable ergonomic and occupational health problems from the use of this new technology. Because of its distinct physical and optical characteristics, the ergonomic requirements for notebook PCs in terms of machine layout, workstation design, lighting conditions, among others, should be different from the CRT-based computers. The Japan Ergonomics Society (JES) technical committee came up with a set of guidelines for notebook PC use following exploratory discussions that dwelt on its ergonomic aspects. To keep in stride with this development, the Technical Committee on Human-Computer Interaction under the auspices of the International Ergonomics Association worked towards the international issuance of the guidelines. This paper unveils the result of this collaborative effort.

  19. The reliability of computer analysis of ultrasonographic prostate images: the influence of inconsistent histopathology

    NARCIS (Netherlands)

    Giesen, R. J.; Huynen, A. L.; de la Rosette, J. J.; Schaafsma, H. E.; van Iersel, M. P.; Aarnink, R. G.; Debruyne, F. M.; Wijkstra, H.

    1994-01-01

    This article describes a method to investigate the influence of inconsistent histopathology during the development of tissue discrimination algorithms. Review of the pathology is performed on the biopsies used as training set of a computer system for cancer detection in ultrasonographic prostate

  20. Computational approaches to standard-compliant biofilm data for reliable analysis and integration

    Directory of Open Access Journals (Sweden)

    Sousa Ana Margarida

    2012-12-01

    Full Text Available The study of microorganism consortia, also known as biofilms, is associated to a number of applications in biotechnology, ecotechnology and clinical domains. Nowadays, biofilm studies are heterogeneous and data-intensive, encompassing different levels of analysis. Computational modelling of biofilm studies has become thus a requirement to make sense of these vast and ever-expanding biofilm data volumes.

  1. Interobserver reliability of coronoid fracture classification: two-dimensional versus three-dimensional computed tomography

    NARCIS (Netherlands)

    Lindenhovius, Anneluuk; Karanicolas, Paul Jack; Bhandari, Mohit; van Dijk, Niek; Ring, David; Allan, Christopher; Anglen, Jeffrey; Axelrod, Terry; Baratz, Mark; Beingessner, Daphne; Brink, Peter; Cassidy, Charles; Coles, Chad; Conflitti, Joe; Crist, Brett; Della Rocca, Gregory; Dijkstra, Sander; Elmans, L. H. G. J.; Feibel, Roger; Flores, Luis; Frihagen, Frede; Gosens, Taco; Goslings, J. C.; Greenberg, Jeffrey; Grosso, Elena; Harness, Neil; van der Heide, Huub; Jeray, Kyle; Kalainov, David; van Kampen, Albert; Kawamura, Sumito; Kloen, Peter; McKee, Michael; Nork, Sean; Page, Richard; Pesantez, Rodrigo; Peters, Anil; Poolman, Rudolf; Prayson, Michael; Richardson, Martin; Seiler, John; Swiontkowski, Marc; Thomas, George; Trumble, Tom; van Vugt, Arie; Wright, Thomas; Zalavras, Charalampos; Zura, Robert

    2009-01-01

    This study tests the hypothesis that 3-dimensional computed tomography (CT) reconstructions improve interobserver agreement on classification and treatment of coronoid fractures compared with 2-dimensional CT. A total of 29 orthopedic surgeons evaluated 10 coronoid fractures on 2 occasions (first

  2. Improving the capacity, reliability & life of mobile devices with cloud computing

    CSIR Research Space (South Africa)

    Nkosi, MT

    2011-05-01

    Full Text Available devices. The approach in this paper is to model the mobile cloud computing process in a 3GPP IMS software development and emulator environment. And show that multimedia and security operations can be performed in the cloud, allowing mobile service...

  3. A self-taught artificial agent for multi-physics computational model personalization.

    Science.gov (United States)

    Neumann, Dominik; Mansi, Tommaso; Itu, Lucian; Georgescu, Bogdan; Kayvanpour, Elham; Sedaghat-Hamedani, Farbod; Amr, Ali; Haas, Jan; Katus, Hugo; Meder, Benjamin; Steidl, Stefan; Hornegger, Joachim; Comaniciu, Dorin

    2016-12-01

    Personalization is the process of fitting a model to patient data, a critical step towards application of multi-physics computational models in clinical practice. Designing robust personalization algorithms is often a tedious, time-consuming, model- and data-specific process. We propose to use artificial intelligence concepts to learn this task, inspired by how human experts manually perform it. The problem is reformulated in terms of reinforcement learning. In an off-line phase, Vito, our self-taught artificial agent, learns a representative decision process model through exploration of the computational model: it learns how the model behaves under change of parameters. The agent then automatically learns an optimal strategy for on-line personalization. The algorithm is model-independent; applying it to a new model requires only adjusting few hyper-parameters of the agent and defining the observations to match. The full knowledge of the model itself is not required. Vito was tested in a synthetic scenario, showing that it could learn how to optimize cost functions generically. Then Vito was applied to the inverse problem of cardiac electrophysiology and the personalization of a whole-body circulation model. The obtained results suggested that Vito could achieve equivalent, if not better goodness of fit than standard methods, while being more robust (up to 11% higher success rates) and with faster (up to seven times) convergence rate. Our artificial intelligence approach could thus make personalization algorithms generalizable and self-adaptable to any patient and any model. Copyright © 2016. Published by Elsevier B.V.

  4. Reliability and availability of redundant systems: Computational program and the use of nomograms

    International Nuclear Information System (INIS)

    Signoret, J.P.

    1975-01-01

    A rigorous mathematical approach to determining the reliability and availability of repairable actively redundant systems - (r/m) systems - is considered for the case where the m units comprising the system are identical and the failure and repair rates, lambda and μ respectively, are constant. The method used involves the Markov processes, operator calculus and matrix calculus. All the results of the study are handled by the FIDIAS program, which is a practical tool for calculating with a high degree of precision the reliability or availability of such (r/m) systems whatever the values of m and r. In the FIDIAS-TC version of FIDIAS it is possible to plot curves with a Benson plotter, so that nomograms are produced for rapid and simple determination of the probabilities of failure or non-availability of the (r/m) systems considered. The practical application of nomograms is of interest because (2/3) and (2/4) actively redundant systems are very often used in the control circuits of power reactors. It is shown how easily one can compare these two systems using nomograms and how one can determine lambda or μ as a function of the anticipated result

  5. User's manual of SECOM2: a computer code for seismic system reliability analysis

    International Nuclear Information System (INIS)

    Uchiyama, Tomoaki; Oikawa, Tetsukuni; Kondo, Masaaki; Tamura, Kazuo

    2002-03-01

    This report is the user's manual of seismic system reliability analysis code SECOM2 (Seismic Core Melt Frequency Evaluation Code Ver.2) developed at the Japan Atomic Energy Research Institute for systems reliability analysis, which is one of the tasks of seismic probabilistic safety assessment (PSA) of nuclear power plants (NPPs). The SECOM2 code has many functions such as: Calculation of component failure probabilities based on the response factor method, Extraction of minimal cut sets (MCSs), Calculation of conditional system failure probabilities for given seismic motion levels at the site of an NPP, Calculation of accident sequence frequencies and the core damage frequency (CDF) with use of the seismic hazard curve, Importance analysis using various indicators, Uncertainty analysis, Calculation of the CDF taking into account the effect of the correlations of responses and capacities of components, and Efficient sensitivity analysis by changing parameters on responses and capacities of components. These analyses require the fault tree (FT) representing the occurrence condition of the system failures and core damage, information about response and capacity of components and seismic hazard curve for the NPP site as inputs. This report presents the models and methods applied in the SECOM2 code and how to use those functions. (author)

  6. Translation, Validation, and Reliability of the Dutch Late-Life Function and Disability Instrument Computer Adaptive Test.

    Science.gov (United States)

    Arensman, Remco M; Pisters, Martijn F; de Man-van Ginkel, Janneke M; Schuurmans, Marieke J; Jette, Alan M; de Bie, Rob A

    2016-09-01

    Adequate and user-friendly instruments for assessing physical function and disability in older adults are vital for estimating and predicting health care needs in clinical practice. The Late-Life Function and Disability Instrument Computer Adaptive Test (LLFDI-CAT) is a promising instrument for assessing physical function and disability in gerontology research and clinical practice. The aims of this study were: (1) to translate the LLFDI-CAT to the Dutch language and (2) to investigate its validity and reliability in a sample of older adults who spoke Dutch and dwelled in the community. For the assessment of validity of the LLFDI-CAT, a cross-sectional design was used. To assess reliability, measurement of the LLFDI-CAT was repeated in the same sample. The item bank of the LLFDI-CAT was translated with a forward-backward procedure. A sample of 54 older adults completed the LLFDI-CAT, World Health Organization Disability Assessment Schedule 2.0, RAND 36-Item Short-Form Health Survey physical functioning scale (10 items), and 10-Meter Walk Test. The LLFDI-CAT was repeated in 2 to 8 days (mean=4.5 days). Pearson's r and the intraclass correlation coefficient (ICC) (2,1) were calculated to assess validity, group-level reliability, and participant-level reliability. A correlation of .74 for the LLFDI-CAT function scale and the RAND 36-Item Short-Form Health Survey physical functioning scale (10 items) was found. The correlations of the LLFDI-CAT disability scale with the World Health Organization Disability Assessment Schedule 2.0 and the 10-Meter Walk Test were -.57 and -.53, respectively. The ICC (2,1) of the LLFDI-CAT function scale was .84, with a group-level reliability score of .85. The ICC (2,1) of the LLFDI-CAT disability scale was .76, with a group-level reliability score of .81. The high percentage of women in the study and the exclusion of older adults with recent joint replacement or hospitalization limit the generalizability of the results. The Dutch LLFDI

  7. Reliability and reproducibility analysis of the Cobb angle and assessing sagittal plane by computer-assisted and manual measurement tools.

    Science.gov (United States)

    Wu, Weifei; Liang, Jie; Du, Yuanli; Tan, Xiaoyi; Xiang, Xuanping; Wang, Wanhong; Ru, Neng; Le, Jinbo

    2014-02-06

    Although many studies on reliability and reproducibility of measurement have been performed on coronal Cobb angle, few results about reliability and reproducibility are reported on sagittal alignment measurement including the pelvis. We usually use SurgimapSpine software to measure the Cobb angle in our studies; however, there are no reports till date on its reliability and reproducible measurements. Sixty-eight standard standing posteroanterior whole-spine radiographs were reviewed. Three examiners carried out the measurements independently under the settings of manual measurement on X-ray radiographies and SurgimapSpine software on the computer. Parameters measured included pelvic incidence, sacral slope, pelvic tilt, Lumbar lordosis (LL), thoracic kyphosis, and coronal Cobb angle. SPSS 16.0 software was used for statistical analyses. The means, standard deviations, intraclass and interclass correlation coefficient (ICC), and 95% confidence intervals (CI) were calculated. There was no notable difference between the two tools (P = 0.21) for the coronal Cobb angle. In the sagittal plane parameters, the ICC of intraobserver reliability for the manual measures varied from 0.65 (T2-T5 angle) to 0.95 (LL angle). Further, for SurgimapSpine tool, the ICC ranged from 0.75 to 0.98. No significant difference in intraobserver reliability was found between the two measurements (P > 0.05). As for the interobserver reliability, measurements with SurgimapSpine tool had better ICC (0.71 to 0.98 vs 0.59 to 0.96) and Pearson's coefficient (0.76 to 0.99 vs 0.60 to 0.97). The reliability of SurgimapSpine measures was significantly higher in all parameters except for the coronal Cobb angle where the difference was not significant (P > 0.05). Although the differences between the two methods are very small, the results of this study indicate that the SurgimapSpine measurement is an equivalent measuring tool to the traditional manual in coronal Cobb angle, but is advantageous in spino

  8. Validity and Reliability of Orthodontic Loops between Mechanical Testing and Computer Simulation: An Finite Element Method Study

    Directory of Open Access Journals (Sweden)

    Gaurav Sepolia

    2014-01-01

    Full Text Available The magnitude and direction of orthodontic force is one of the essential concerns of orthodontic tooth movements. Excessive force may cause root resorption and mobility of the tooth, whereas low force level may results in prolonged treatment. The addition of loops allows the clinician to more accurately achieve the desired results. Aims and objectives: The purpose of the study was to evaluate the validity and reliability of orthodontic loops between mechanical testing and computer simulation. Materials and methods: Different types of loops were taken and divided into four groups: The Teardrop loop, Opus loop, L loop and T loop. These were artificially activated for multiple lengths and studied using the FEM. Results: The Teardrop loop showed the highest force level, and there is no significant difference between mechanical testing and computer simulation.

  9. A personal computer code for seismic evaluations of nuclear power plant facilities

    International Nuclear Information System (INIS)

    Xu, J.; Graves, H.

    1991-01-01

    In the process of review and evaluation of licensing issues related to nuclear power plants, it is essential to understand the behavior of seismic loading, foundation and structural properties and their impact on the overall structural response. In most cases, such knowledge could be obtained by using simplified engineering models which, when properly implemented, can capture the essential parameters describing the physics of the problem. Such models do not require execution on large computer systems and could be implemented through a personal computer (PC) based capability. Recognizing the need for a PC software package that can perform structural response computations required for typical licensing reviews, the US Nuclear Regulatory Commission sponsored the development of a PC operated computer software package CARES (Computer Analysis for Rapid Evaluation of Structures) system. This development was undertaken by Brookhaven National Laboratory (BNL) during FY's 1988 and 1989. A wide range of computer programs and modeling approaches are often used to justify the safety of nuclear power plants. It is often difficult to assess the validity and accuracy of the results submitted by various utilities without developing comparable computer solutions. Taken this into consideration, CARES is designed as an integrated computational system which can perform rapid evaluations of structural behavior and examine capability of nuclear power plant facilities, thus CARES may be used by the NRC to determine the validity and accuracy of analysis methodologies employed for structural safety evaluations of nuclear power plants. CARES has been designed to operate on a PC, have user friendly input/output interface, and have quick turnaround. This paper describes the various features which have been implemented into the seismic module of CARES version 1.0

  10. Personality Trait and Facial Expression Filter-Based Brain-Computer Interface

    Directory of Open Access Journals (Sweden)

    Seongah Chin

    2013-02-01

    Full Text Available In this paper, we present technical approaches that bridge the gap in the research related to the use of brain-computer interfaces for entertainment and facial expressions. Such facial expressions that reflect an individual's personal traits can be used to better realize artificial facial expressions in a gaming environment based on a brain-computer interface. First, an emotion extraction filter is introduced in order to classify emotions on the basis of the users' brain signals in real time. Next, a personality trait filter is defined to classify extrovert and introvert types, which manifest as five traits: very extrovert, extrovert, medium, introvert and very introvert. In addition, facial expressions derived from expression rates are obtained by an extrovert-introvert fuzzy model through its defuzzification process. Finally, we confirm this validation via an analysis of the variance of the personality trait filter, a k-fold cross validation of the emotion extraction filter, an accuracy analysis, a user study of facial synthesis and a test case game.

  11. Accuracy and reliability of linear cephalometric measurements from cone-beam computed tomography scans of a dry human skull.

    Science.gov (United States)

    Berco, Mauricio; Rigali, Paul H; Miner, R Matthew; DeLuca, Stephelynn; Anderson, Nina K; Will, Leslie A

    2009-07-01

    The purpose of this study was to determine the accuracy and reliability of 3-dimensional craniofacial measurements obtained from cone-beam computed tomography (CBCT) scans of a dry human skull. Seventeen landmarks were identified on the skull. CBCT scans were then obtained, with 2 skull orientations during scanning. Twenty-nine interlandmark linear measurements were made directly on the skull and compared with the same measurements made on the CBCT scans. All measurements were made by 2 operators on 4 separate occasions. The method errors were 0.19, 0.21, and 0.19 mm in the x-, y- and z-axes, respectively. Repeated measures analysis of variance (ANOVA) showed no significant intraoperator or interoperator differences. The mean measurement error was -0.01 mm (SD, 0.129 mm). Five measurement errors were found to be statistically significantly different; however, all measurement errors were below the known voxel size and clinically insignificant. No differences were found in the measurements from the 2 CBCT scan orientations of the skull. CBCT allows for clinically accurate and reliable 3-dimensional linear measurements of the craniofacial complex. Moreover, skull orientation during CBCT scanning does not affect the accuracy or the reliability of these measurements.

  12. Accuracy and Reliability of Cone-Beam Computed Tomography for Linear and Volumetric Mandibular Condyle Measurements. A Human Cadaver Study.

    Science.gov (United States)

    García-Sanz, Verónica; Bellot-Arcís, Carlos; Hernández, Virginia; Serrano-Sánchez, Pedro; Guarinos, Juan; Paredes-Gallardo, Vanessa

    2017-09-20

    The accuracy of Cone-Beam Computed Tomography (CBCT) on linear and volumetric measurements on condyles has only been assessed on dry skulls. The aim of this study was to evaluate the reliability and accuracy of linear and volumetric measurements of mandibular condyles in the presence of soft tissues using CBCT. Six embalmed cadaver heads were used. CBCT scans were taken, followed by the extraction of the condyles. The water displacement technique was used to calculate the volumes of the condyles and three linear measurements were made using a digital caliper, these measurements serving as the gold standard. Surface models of the condyles were obtained using a 3D scanner, and superimposed onto the CBCT images. Condyles were isolated on the CBCT render volume using the surface models as reference and volumes were measured. Linear measurements were made on CBCT slices. The CBCT method was found to be reliable for both volumetric and linear measurements (CV  0.90). Highly accurate values were obtained for the three linear measurements and volume. CBCT is a reliable and accurate method for taking volumetric and linear measurements on mandibular condyles in the presence of soft tissue, and so a valid tool for clinical diagnosis.

  13. Computing interval-valued reliability measures: application of optimal control methods

    DEFF Research Database (Denmark)

    Kozin, Igor; Krymsky, Victor

    2017-01-01

    The paper describes an approach to deriving interval-valued reliability measures given partial statistical information on the occurrence of failures. We apply methods of optimal control theory, in particular, Pontryagin’s principle of maximum to solve the non-linear optimisation problem and derive...... the probabilistic interval-valued quantities of interest. It is proven that the optimisation problem can be translated into another problem statement that can be solved on the class of piecewise continuous probability density functions (pdfs). This class often consists of piecewise exponential pdfs which appear...... as soon as among the constraints there are bounds on a failure rate of a component under consideration. Finding the number of switching points of the piecewise continuous pdfs and their values becomes the focus of the approach described in the paper. Examples are provided....

  14. Computing interval-valued statistical characteristics: What is the stumbling block for reliability applications?

    DEFF Research Database (Denmark)

    Kozine, Igor; Krymsky, V.G.

    2009-01-01

    The application of interval-valued statistical models is often hindered by the rapid growth in imprecision that occurs when intervals are propagated through models. Is this deficiency inherent in the models? If so, what is the underlying cause of imprecision in mathematical terms? What kind...... of additional information can be incorporated to make the bounds tighter? The present paper gives an account of the source of this imprecision that prevents interval-valued statistical models from being widely applied. Firstly, the mathematical approach to building interval-valued models (discrete...... and continuous) is delineated. Secondly, a degree of imprecision is demonstrated on some simple reliability models. Thirdly, the root mathematical cause of sizeable imprecision is elucidated and, finally, a method of making the intervals tighter is described. A number of examples are given throughout the paper....

  15. Statistical test data selection for reliability evalution of process computer software

    International Nuclear Information System (INIS)

    Volkmann, K.P.; Hoermann, H.; Ehrenberger, W.

    1976-01-01

    The paper presents a concept for converting knowledge about the characteristics of process states into practicable procedures for the statistical selection of test cases in testing process computer software. Process states are defined as vectors whose components consist of values of input variables lying in discrete positions or within given limits. Two approaches for test data selection, based on knowledge about cases of demand, are outlined referring to a purely probabilistic method and to the mathematics of stratified sampling. (orig.) [de

  16. Proof-of-Concept Demonstrations for Computation-Based Human Reliability Analysis. Modeling Operator Performance During Flooding Scenarios

    International Nuclear Information System (INIS)

    Joe, Jeffrey Clark; Boring, Ronald Laurids; Herberger, Sarah Elizabeth Marie; Mandelli, Diego; Smith, Curtis Lee

    2015-01-01

    The United States (U.S.) Department of Energy (DOE) Light Water Reactor Sustainability (LWRS) program has the overall objective to help sustain the existing commercial nuclear power plants (NPPs). To accomplish this program objective, there are multiple LWRS 'pathways,' or research and development (R&D) focus areas. One LWRS focus area is called the Risk-Informed Safety Margin and Characterization (RISMC) pathway. Initial efforts under this pathway to combine probabilistic and plant multi-physics models to quantify safety margins and support business decisions also included HRA, but in a somewhat simplified manner. HRA experts at Idaho National Laboratory (INL) have been collaborating with other experts to develop a computational HRA approach, called the Human Unimodel for Nuclear Technology to Enhance Reliability (HUNTER), for inclusion into the RISMC framework. The basic premise of this research is to leverage applicable computational techniques, namely simulation and modeling, to develop and then, using RAVEN as a controller, seamlessly integrate virtual operator models (HUNTER) with 1) the dynamic computational MOOSE runtime environment that includes a full-scope plant model, and 2) the RISMC framework PRA models already in use. The HUNTER computational HRA approach is a hybrid approach that leverages past work from cognitive psychology, human performance modeling, and HRA, but it is also a significant departure from existing static and even dynamic HRA methods. This report is divided into five chapters that cover the development of an external flooding event test case and associated statistical modeling considerations.

  17. Proof-of-Concept Demonstrations for Computation-Based Human Reliability Analysis. Modeling Operator Performance During Flooding Scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Joe, Jeffrey Clark [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boring, Ronald Laurids [Idaho National Lab. (INL), Idaho Falls, ID (United States); Herberger, Sarah Elizabeth Marie [Idaho National Lab. (INL), Idaho Falls, ID (United States); Mandelli, Diego [Idaho National Lab. (INL), Idaho Falls, ID (United States); Smith, Curtis Lee [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-09-01

    The United States (U.S.) Department of Energy (DOE) Light Water Reactor Sustainability (LWRS) program has the overall objective to help sustain the existing commercial nuclear power plants (NPPs). To accomplish this program objective, there are multiple LWRS “pathways,” or research and development (R&D) focus areas. One LWRS focus area is called the Risk-Informed Safety Margin and Characterization (RISMC) pathway. Initial efforts under this pathway to combine probabilistic and plant multi-physics models to quantify safety margins and support business decisions also included HRA, but in a somewhat simplified manner. HRA experts at Idaho National Laboratory (INL) have been collaborating with other experts to develop a computational HRA approach, called the Human Unimodel for Nuclear Technology to Enhance Reliability (HUNTER), for inclusion into the RISMC framework. The basic premise of this research is to leverage applicable computational techniques, namely simulation and modeling, to develop and then, using RAVEN as a controller, seamlessly integrate virtual operator models (HUNTER) with 1) the dynamic computational MOOSE runtime environment that includes a full-scope plant model, and 2) the RISMC framework PRA models already in use. The HUNTER computational HRA approach is a hybrid approach that leverages past work from cognitive psychology, human performance modeling, and HRA, but it is also a significant departure from existing static and even dynamic HRA methods. This report is divided into five chapters that cover the development of an external flooding event test case and associated statistical modeling considerations.

  18. Personal computer security: part 1. Firewalls, antivirus software, and Internet security suites.

    Science.gov (United States)

    Caruso, Ronald D

    2003-01-01

    Personal computer (PC) security in the era of the Health Insurance Portability and Accountability Act of 1996 (HIPAA) involves two interrelated elements: safeguarding the basic computer system itself and protecting the information it contains and transmits, including personal files. HIPAA regulations have toughened the requirements for securing patient information, requiring every radiologist with such data to take further precautions. Security starts with physically securing the computer. Account passwords and a password-protected screen saver should also be set up. A modern antivirus program can easily be installed and configured. File scanning and updating of virus definitions are simple processes that can largely be automated and should be performed at least weekly. A software firewall is also essential for protection from outside intrusion, and an inexpensive hardware firewall can provide yet another layer of protection. An Internet security suite yields additional safety. Regular updating of the security features of installed programs is important. Obtaining a moderate degree of PC safety and security is somewhat inconvenient but is necessary and well worth the effort. Copyright RSNA, 2003

  19. Improving operational safety management through probabilistic safety assessment on personal computers

    International Nuclear Information System (INIS)

    1988-10-01

    The Technical Committee Meeting considered the current effort in the implementation and use of PSA information for day-to-day operational safety management on Personal Computers. Due to the very recent development of the necessary hardware and software for Personal Computers, the application of PSA information for day-to-day operational safety management on PCs is essentially still in a pioneering stage. There is at present only one such system for end users existing, the PRISIM (Plant Risk Status Information Management) program for which a limited practical application experience is available. Others are still in the development stage. The main aim of the Technical Committee Meeting was to discuss the present status of PSA based systems for operational safety management support on small computers, to consider practical aspects when implementing these systems into a nuclear installation and to address problems related to the further work in the area. A separate abstract was prepared for the summary of the Technical Committee Meeting and for the 8 papers presented by the participants. Refs, figs and tabs

  20. Personality Questionnaires as a Basis for Improvement of University Courses in Applied Computer Science and Informatics

    Directory of Open Access Journals (Sweden)

    Vladimir Ivančević

    2017-07-01

    Full Text Available In this paper, we lay the foundation for an adaptation of the teaching process to the personality traits and academic performance of the university students enrolled in applied computer science and informatics (ACSI. We discuss how such an adaptation could be supported by an analytical software solution and present the initial version of this solution. In the form of a case study, we discuss the scores from a personality questionnaire that was administered to a group of university students enrolled in an introductory programming course at the Faculty of Technical Sciences, University of Novi Sad, Serbia. During a non-mandatory workshop on programming, the participants completed the 48-item short-scale Eysenck Personality Questionnaire–Revised (EPQ– R. By using various exploratory and analytical techniques, we inspect the student EPQ–R scores and elaborate on the specificities of the participating student group. As part of our efforts to understand the broader relevance of different student personality traits in an academic environment, we also discuss how the EPQ–R scores of students could provide information valuable to the process of improving student learning and performance in university courses in ACSI.

  1. Personal computers pollute indoor air: effects on perceived air quality, SBS symptoms and productivity in offices

    DEFF Research Database (Denmark)

    Bako-Biro, Zsolt; Wargocki, Pawel; Weschler, Charles J.

    2002-01-01

    was reduced and air freshness increased; all effects were significant. In the presence of PCs the performance of text typing significantly decreased. The sensory pollution load of the PCs was found to be 3 olf per PC, i.e. three times the load of the occupants. Present results indicate negative effects of PCs......Perceived air quality and Sick Building Syndrome (SBS) symptoms were studied in a low-polluting office space ventilated at an air change rate of 2 h-1 (10 L/s per person with 6 people present) with and without personal computers (PCs). Other environmental parameters were kept constant. Thirty...... female subjects were exposed for 4.8 h to each of the two conditions in the office and performed simulated office work. They remained thermally neutral by adjusting their clothing and were blind to the interventions. In the absence of PCs in the office the perceived air quality improved, odour intensity...

  2. Application of a brain-computer interface for person authentication using EEG responses to photo stimuli.

    Science.gov (United States)

    Mu, Zhendong; Yin, Jinhai; Hu, Jianfeng

    2018-01-01

    In this paper, a person authentication system that can effectively identify individuals by generating unique electroencephalogram signal features in response to self-face and non-self-face photos is presented. In order to achieve a good stability performance, the sequence of self-face photo including first-occurrence position and non-first-occurrence position are taken into account in the serial occurrence of visual stimuli. In addition, a Fisher linear classification method and event-related potential technique for feature analysis is adapted to yield remarkably better outcomes than that by most of the existing methods in the field. The results have shown that the EEG-based person authentications via brain-computer interface can be considered as a suitable approach for biometric authentication system.

  3. Fast and reliable method for computing free-bound emission coefficients for hydrogenic ions

    Energy Technology Data Exchange (ETDEWEB)

    Sarmiento, A; Canto, J

    1985-12-01

    An approximate formula for the computation of the free-bound emission coefficient for hydrogenic ions is presented. The approximation is obtained through a manipulation of the (free-bound) Gaunt factor which intentionally distinguish the dependence on frequency from the dependence on temperature and ionic composition. Numerical tests indicate that the derived formula is very precise, fast and easy to use, making the calculation of the free-bound contribution from an ionized region of varying temperature and ionic composition a very simple and time-saving task.

  4. A fast and reliable method for computing free-bound emission coefficients for hydrogenic ions

    International Nuclear Information System (INIS)

    Sarmiento, A.; Canto, J.

    1985-01-01

    An approximate formula for the computation of the free-bound emission coefficient for hydrogenic ions is presented. The approximation is obtained through a manipulation of the (free-bound) Gaunt factor which intentionally distinguish the dependence on frequency from the dependence on temperature and ionic composition. Numerical tests indicate that the derived formula is very precise, fast and easy to use, making the calculation of the free-bound contribution from an ionized region of varying temperature and ionic composition a very simple and time-saving task. (author)

  5. A computational model for reliability calculation of steam generators from defects in its tubes

    International Nuclear Information System (INIS)

    Rivero, Paulo C.M.; Melo, P.F. Frutuoso e

    2000-01-01

    Nowadays, probability approaches are employed for calculating the reliability of steam generators as a function of defects in their tubes without any deterministic association with warranty assurance. Unfortunately, probability models produce large failure values, as opposed to the recommendation of the U.S. Code of Federal Regulations, that is, failure probabilities must be as small as possible In this paper, we propose the association of the deterministic methodology with the probabilistic one. At first, the failure probability evaluation of steam generators follows a probabilistic methodology: to find the failure probability, critical cracks - obtained from Monte Carlo simulations - are limited to have length's in the interval defined by their lower value and the plugging limit one, so as to obtain a failure probability of at most 1%. The distribution employed for modeling the observed (measured) cracks considers the same interval. Any length outside the mentioned interval is not considered for the probability evaluation: it is approached by the deterministic model. The deterministic approach is to plug the tube when any anomalous crack is detected in it. Such a crack is an observed one placed in the third region on the plot of the logarithmic time derivative of crack lengths versus the mode I stress intensity factor, while for normal cracks the plugging of tubes occurs in the second region of that plot - if they are dangerous, of course, considering their random evolution. A methodology for identifying anomalous cracks is also presented. (author)

  6. Computed tomography and angiography do not reliably discriminate malignant meningiomas from benign ones

    International Nuclear Information System (INIS)

    Servo, A.; Porras, M.; Jaeaeskelaeinen, J.; Paetau, A.; Haltia, M.

    1990-01-01

    Histological anaplasia, found in up to 10% of meningiomas, is an important prognostic sign as it is associated with increased recurrence rate and volume growth rate. We studied in retrospect a series of 230 primary intracranial meningiomas to discover whether histological anaplasia can be reliably foreseen in CT scans and angiograms. 205 meningiomas were histologically benign, and 25 meningiomas were classified as malignant (atypical or anaplastic), with either incipient (20) or overt (5) signs of anaplasia. Of ten CT parameters tested, three were associated significantly more often with malignant meningiomas: Nodular contour (58.3% vs 26.7%); cysts (20.0% vs 4.4%) and absence of calcifications (92% vs 65.3%); none of these parameters was an absolute sign of anaplasia. 'Mushrooming', previously regarded as a definite sign of malignancy, was seen in 9% of benign meningiomas and in 21% of malignant ones. In angiography, no apparent differences between benign and malignant meningiomas were seen. The conclusion is that it is not possible to distinguish malignant meningiomas from benign ones with CT or angiography. (orig.)

  7. PC-BEIS: a personal computer version of the biogenic emissions inventory system

    International Nuclear Information System (INIS)

    Pierce, T.E.; Waldruff, P.S.

    1991-01-01

    The US Environmental Protection Agency's Biogenic Emissions Inventory System (BEIS) has been adapted for use on IBM-compatible personal computers (PCs). PC-BEIS estimates hourly emissions of isoprene, α-pinene, other monoterpenes, and unidentified hydrocarbons for any county in the contiguous United States. To run the program, users must provide hourly data on ambient temperature, relative humidity, wind speed, cloud cover, and a code that identifies the particular county. This paper provides an overview of the method used to calculate biogenic emissions, shows an example application, and gives information on how to obtain a copy of the program

  8. Adaptation of OCA-P, a probabilistic fracture-mechanics code, to a personal computer

    International Nuclear Information System (INIS)

    Ball, D.G.; Cheverton, R.D.

    1985-01-01

    The OCA-P probabilistic fracture-mechanics code can now be executed on a personal computer with 512 kilobytes of memory, a math coprocessor, and a hard disk. A user's guide for the particular adaptation has been prepared, and additional importance sampling techniques for OCA-P have been developed that allow the sampling of only the tails of selected distributions. Features have also been added to OCA-P that permit RTNDT to be used as an ''independent'' variable in the calculation of P

  9. LUDEP 1. 0, a personal computer program to implement the new ICRP respiratory tract model

    Energy Technology Data Exchange (ETDEWEB)

    Jarvis, N.S.; Birchall, A. (National Radiological Protection Board, Chilton (United Kingdom))

    1994-01-01

    The International Commission on Radiological Protection has recently approved a new model of the human respiratory tract. This model has been designed to represent realistically the deposition and biokinetic behaviour of inhaled radionuclides, and to calculate doses to the respiratory tract. In order to examine the practical application and radiological implications of the new model, a Personal Computer program has been developed. LUDEP 1.0 is a user-friendly program for the IBM-compatible PC which enables the user to calculate doses to the respiratory tract and to other organs. (author).

  10. Personal computer based decision support system for routing nuclear spent fuel

    International Nuclear Information System (INIS)

    Chin, Shih-Miao; Joy, D.S.; Johnson, P.E.; Bobic, S.M.; Miaou, Shaw-Pin

    1989-01-01

    An approach has been formulated to route nuclear spent fuel over the US Interstate highway network. This approach involves the generation of alternative routes so that any potential adverse impacts will not only concentrate on regions along the shortest path between the nuclear power plant and repository. Extensive literature research on the shortest path finding algorithms has been carried out. Consequently, an extremely efficient shortest path algorithm has been implemented and significantly increases the overall system performance. State-of-the-art interactive computer graphics is used. In addition to easy-to-use pop-up menus, full color mapping and display capabilities are also incorporated. All of these features have been implemented on commonly available personal computers. 6 figs., 2 tabs

  11. [Realistic possibilities of utilization of a personal computer in the office of a general practitioner].

    Science.gov (United States)

    Masopust, V

    1991-04-01

    In May 1990 work on the programme "Computer system of the health community doctor Mic DOKI was" completed which resolves more than 70 basic tasks pertaining to the keeping of health documentation by health community doctors; it resolves automatically the entire administrative work in the health community, makes it possible to evaluate the activity of doctors and nurses it will facilitate the work of control organs of future health insurance companies and contribute to investigations of the health status of the population. Despite some problems ensuing from the contemporary economic situation of the country, the validity of contemporary health regulations and minimal training of our health personnel in the use of personal computers computerization of the health community system can be considered an asset to the reform of the health services which is under way.

  12. GAMCAT - a personal computer database on alpha particles and gamma rays from radioactive decay

    International Nuclear Information System (INIS)

    Tepel, J.W.; Mueller, H.W.

    1990-01-01

    The GAMCAT database is a compilation of data describing the alpha particles and gamma rays that occur in the radioactive decay of all known nuclides, adapted for IBM Personal Computers and compatible systems. These compiled data have been previously published, and are now available as a compact database. Entries can be retrieved by defining the properties of the parent nuclei as well as alpha-particle and gamma-ray energies or any combination of these parameters. The system provides fast access to the data and has been completely written in C to run on an AT-compatible computer, with a hard disk and 640K of memory under DOS 2.11 or higher. GAMCAT is available from the Fachinformationszentrum Karlsruhe. (orig.)

  13. Half a century of optics in computing--a personal perspective [Invited].

    Science.gov (United States)

    Shamir, Joseph

    2013-02-01

    Optical signal processing and computing was triggered by the invention of the laser. Starting practically in 1960, it really took off with the introduction of the spatial-matched filter in 1964. Almost half a century later, research and engineering activity in the field continues unabated but in directions that could not have been anticipated in those early days. This paper presents an overview of the developments in the field, discussing the advantages, disadvantages, and limitations of optics in computing paradigms to indicate where and how optics can be exploited in this area. Initially, optical methods were introduced for processing analog signals. Early attempts to extend optical methods toward digital processing failed because the differences between photons and electrons were not properly appreciated. In the last part of the paper we show that some novel concepts and advanced technology may revitalize also optical processes within the digital computing world. This latter development is demonstrated by digital logic functions implemented on simple electro-optic networks. (My personal perspective on the role of optics in computing is deeply rooted in many years of collaboration with my late friend, H. John Caulfield, and I dedicate this paper to his memory.).

  14. Reliability Calculations

    DEFF Research Database (Denmark)

    Petersen, Kurt Erling

    1986-01-01

    Risk and reliability analysis is increasingly being used in evaluations of plant safety and plant reliability. The analysis can be performed either during the design process or during the operation time, with the purpose to improve the safety or the reliability. Due to plant complexity and safety...... and availability requirements, sophisticated tools, which are flexible and efficient, are needed. Such tools have been developed in the last 20 years and they have to be continuously refined to meet the growing requirements. Two different areas of application were analysed. In structural reliability probabilistic...... approaches have been introduced in some cases for the calculation of the reliability of structures or components. A new computer program has been developed based upon numerical integration in several variables. In systems reliability Monte Carlo simulation programs are used especially in analysis of very...

  15. Reliability and validity of the Persian version of the spinal cord injury lifestyle scale and the health behavior questionnaire in persons with spinal cord injury.

    Science.gov (United States)

    Shabany, Maryam; Nasrabadi, Alireza Nikbakht; Rahimi-Movaghar, Vafa; Mansournia, Mohammad Ali; Mohammadi, Nooredin; Pruitt, Sheri D

    2018-05-01

    Cross-sectional psychometric study. To evaluate the reliability and validity of a spinal cord injury lifestyle scale (SCILS) and Health Behavior Questionnaire (HBQ) in the Persian language for persons with spinal cord injury (SCI). Participants were selected among those referred to health centers and the Brain and Spinal Cord Injury Research Center. In accordance with standard procedure for translation, two questionnaires, the SCILS and HBQ, were translated using a forward and backward translation approach by professional translators. Face validity of the questionnaires was assessed by ten persons with SCI and content validity was agreed upon by 12 professors from health care teaching universities. To test the final versions of both questionnaires, 97 persons with SCI were included using a consecutive sampling method. Other questionnaires were used to assess concurrent validity (secondary impairment checklist, as well as SCILS and HBQ) and convergent validity (impact of event scale revised, brief symptom inventory, beck depression inventory, and functional independence measure). Internal consistency of SCILS and HBQ, assessed by Cronbach's alpha, was 0.75 for SCILS and 0.85 for HBQ. Test-retest reliability intraclass correlations were 0.86 and 0.92 for SCILS and HBQ, respectively. The number of current secondary impairments had a significant and negative correlation with SCILS (r = -0.22, P SCILS had a significant and strong correlation with HBQ (r = 0.65, P SCILS and HBQ can be used for measuring the health behavior of persons with SCI in Iran.

  16. A Psychometric Evaluation of the DSM-IV Criteria for Antisocial Personality Disorder: Dimensionality, Local Reliability, and Differential Item Functioning Across Gender.

    Science.gov (United States)

    Paap, Muirne C S; Braeken, Johan; Pedersen, Geir; Urnes, Øyvind; Karterud, Sigmund; Wilberg, Theresa; Hummelen, Benjamin

    2017-12-01

    This study aims at evaluating the psychometric properties of the antisocial personality disorder (ASPD) criteria in a large sample of patients, most of whom had one or more personality disorders (PD). PD diagnoses were assessed by experienced clinicians using the Structured Clinical Interview for Diagnostic and Statistical Manual of Mental Disorders, 4th edition, Axis II PDs. Analyses were performed within an item response theory framework. Results of the analyses indicated that ASPD is a unidimensional construct that can be measured reliably at the upper range of the latent trait scale. Differential item functioning across gender was restricted to two criteria and had little impact on the latent ASPD trait level. Patients fulfilling both the adult ASPD criteria and the conduct disorder criteria had similar latent trait distributions as patients fulfilling only the adult ASPD criteria. Overall, the ASPD items fit the purpose of a diagnostic instrument well, that is, distinguishing patients with moderate from those with high antisocial personality scores.

  17. An external irradiation treatment planning system installed on a personal computer. 137

    International Nuclear Information System (INIS)

    Kunieda, Etso; Ogawa, Koichi; Mita, Kazumasa; Sekiguchi, Kozo; Wada, Tadashi; Hashimoto, Shyozo

    1987-01-01

    A compact and practical treatment planning system for external photon therapy has been developed for use on a desk-top personal computer. The system calculates the dose distributions of inhomogeneous density fields by using the CT-value of each pixel and displays isodose curves on the CRT superimposed on the gray scale CT image or on a hard-copy. Inhomogeneity correction is based on the TAR method where the path length from the calculation point to the surface is determined by summing up electron density derived from the CT-values of pixels on the path. Wedge filter correction is also available by using stored geometric data. The contour of patients is acquired by tracting the CT image on the light panel of the digitizer, or directly from the digital CT data. Though some critical parts of the programs are written in machine language, the system is mostly in BASIC and C languages. The minimum required hardware consists of a MS-DOS based personal computer, a color CRT display, an 8 inch floppy disk drive and a digitizer. They are generally available in Japan at reasonable cost. Tests were carried out in homogeneous and inhomogeneous density phantoms to evaluate the accuracy of the acquired dosage, and showed reasonable results compared with other commercially available treatment planning systems. The overall calculation time is satisfactory for multiple beam calculations. 5 refs.; 3 figs

  18. Design of pulse oximetry signal based on personal computer for detection oxygen saturation

    International Nuclear Information System (INIS)

    Umi Salamah; Margi Sasono

    2015-01-01

    The lack or excess of oxygen in the blood will cause healthy and body system disorder. At certain level, the disease can lead to death. For that reason, the information about oxygen saturation in blood becomes important to be identified. One of the devices used to monitor the blood oxygen saturation is pulse oximetry. This research attempt to designed Pulse Oximetry based on personal computer using red LED and infrared as its light source, while the light sensor using photodiode. The designed Pulse Oximetry is a non-invasive instrumentation which LED drivers is placed on the fingertips. The LED light goes through the finger will be a signal that is fed to the photodiode and will be converted into digital signals by ADC (Analog to Digital Converter) and will be processed further by a personal computer to display the pulse oximetry graphics. This study uses Delphi 7, Microsoft Excel, and Mt Lab as its software.This designed pulse oximetry has been tested in two peoples: sample A, male 38 years; and sample B, a woman 23 years old. Oxygen saturation of sample A is 80.75, while the sample B is 90.75. (author)

  19. Development of expert system on personal computer for diagnosis of nuclear reactor malfunctions

    International Nuclear Information System (INIS)

    Kameyama, Takanori; Uekata, Tomomichi; Oka, Yoshiaki; Kondo, Shunsuke; Togo, Yasumasa

    1988-01-01

    An expert system on a personal computer has been developed for diagnosis of malfunction of the fast experimental reactor 'JOYO'. Prolog-KABA is used as the language. The system diagnoses the event which causes scram or set-back of the control rod after an alarm at steady state operation. The knowledge base (KB) consists of several sub-KBs and a meta-KB. Using the forward chaining, the meta-KB decides which sub-KB should be accessed. The cause of the malfunction is identified in the sub-KB using the backward chaining. The terms expressing the characteristics of the events are involved in the production rules as attributes in order to use the Prolog function of pattern matching and back-tracking for efficient inference. The total number of the rules in the system is about 400. The experiments using the plant simulator of 'JOYO' have shown that malfunctions are successfully identified by the diagnosis system. It takes about 10s for each diagnosis using the 16-bits personal computer, PC-9801 VM. (author)

  20. Testing a bedside personal computer Clinical Care Classification System for nursing students using Microsoft Access.

    Science.gov (United States)

    Feeg, Veronica D; Saba, Virginia K; Feeg, Alan N

    2008-01-01

    This study tested a personal computer-based version of the Sabacare Clinical Care Classification System on students' performance of charting patient care plans. The application was designed as an inexpensive alternative to teach electronic charting for use on any laptop or personal computer with Windows and Microsoft Access. The data-based system was tested in a randomized trial with the control group using a type-in text-based-only system also mounted on a laptop at the bedside in the laboratory. Student care plans were more complete using the data-based system over the type-in text version. Students were more positive but not necessarily more efficient with the data-based system. The results demonstrate that the application is effective for improving student nursing care charting using the nursing process and capturing patient care information with a language that is standardized and ready for integration with other patient electronic health record data. It can be implemented on a bedside stand in the clinical laboratory or used to aggregate care planning over a student's clinical experience.

  1. Computational approaches to standard-compliant biofilm data for reliable analysis and integration.

    Science.gov (United States)

    Sousa, Ana Margarida; Ferreira, Andreia; Azevedo, Nuno F; Pereira, Maria Olivia; Lourenço, Anália

    2012-12-01

    The study of microorganism consortia, also known as biofilms, is associated to a number of applications in biotechnology, ecotechnology and clinical domains. Nowadays, biofilm studies are heterogeneous and data-intensive, encompassing different levels of analysis. Computational modelling of biofilm studies has become thus a requirement to make sense of these vast and ever-expanding biofilm data volumes. The rationale of the present work is a machine-readable format for representing biofilm studies and supporting biofilm data interchange and data integration. This format is supported by the Biofilm Science Ontology (BSO), the first ontology on biofilms information. The ontology is decomposed into a number of areas of interest, namely: the Experimental Procedure Ontology (EPO) which describes biofilm experimental procedures; the Colony Morphology Ontology (CMO) which characterises morphologically microorganism colonies; and other modules concerning biofilm phenotype, antimicrobial susceptibility and virulence traits. The overall objective behind BSO is to develop semantic resources to capture, represent and share data on biofilms and related experiments in a regularized fashion manner. Furthermore, the present work also introduces a framework in assistance of biofilm data interchange and analysis - BiofOmics (http://biofomics.org) - and a public repository on colony morphology signatures - MorphoCol (http://stardust.deb.uminho.pt/morphocol).

  2. A comparative study of computed radiographic cephalometry and conventional cephalometry in reliability of head film measurements

    International Nuclear Information System (INIS)

    Kim, Hyung Done; Kim, Kee Deog; Park, Chang Seo

    1997-01-01

    The purpose of this study was to compare and to find out the variability of head film measurements (landmarks identification) between Fuji computed radiographic cephalometry and conventional cephalometry. 28 Korean adults were selected. Lateral cephalometric FCR film and conventional cephalometric film of each subject was taken. Four investigators identified 24 cephalometric landmarks on lateral cephalometric FCR film and conventional cephalometric film were statistically analysed. The results were as follows : 1. In FCR film and conventional film, coefficient of variation (C.V.) of 24 landmarks was taken horizontally and vertically. 2. In comparison of significant differences of landmarks variability between FCR film and conventional film, horizontal l value of coefficient of variation showed significant differences in four landmarks among twenty-four landmarks, but vertical a value of coefficient of variation showed significant differences in sixteen landmarks among twenty-four landmarks. FCR film showed significantly less variability than conventional film in 17 subjects among 20 (4+16) subjects that sho wed significant difference.

  3. Effects of pollution from personal computers on perceived air quality, SBS symptoms and productivity in offices

    DEFF Research Database (Denmark)

    Bako-Biro, Zsolt; Wargocki, Pawel; Weschler, Charles J.

    2004-01-01

    In groups of six, 30 female subjects were exposed for 4.8 h in a low-polluting office to each of two conditions the presence or absence of 3-month-old personal computers (PCs). These PCs were placed behind a screen so that they were not visible to the subjects. Throughout the exposure the outdoor...... air supply was maintained at 10 l/s per person. Under each of the two conditions the subjects performed simulated office work using old low-polluting PCs. They also evaluated the air quality and reported Sick Building Syndrome (SBS) symptoms. The PCs were found to be strong indoor pollution sources......, even after they had been in service for 3 months. The sensory pollution load of each PC was 3.4 olf, more than three times the pollution of a standard person. The presence of PCs increased the percentage of people dissatisfied with the perceived air quality from 13 to 41% and increased by 9% the time...

  4. Evaluation of the reliability and accuracy of using cone-beam computed tomography for diagnosing periapical cysts from granulomas.

    Science.gov (United States)

    Guo, Jing; Simon, James H; Sedghizadeh, Parish; Soliman, Osman N; Chapman, Travis; Enciso, Reyes

    2013-12-01

    The purpose of this study was to evaluate the reliability and accuracy of cone-beam computed tomographic (CBCT) imaging against the histopathologic diagnosis for the differential diagnosis of periapical cysts (cavitated lesions) from (solid) granulomas. Thirty-six periapical lesions were imaged using CBCT scans. Apicoectomy surgeries were conducted for histopathological examination. Evaluator 1 examined each CBCT scan for the presence of 6 radiologic characteristics of a cyst (ie, location, periphery, shape, internal structure, effects on surrounding structure, and perforation of the cortical plate). Not every cyst showed all radiologic features (eg, not all cysts perforate the cortical plate). For the purpose of finding the minimum number of diagnostic criteria present in a scan to diagnose a lesion as a cyst, we conducted 6 receiver operating characteristic curve analyses comparing CBCT diagnoses with the histopathologic diagnosis. Two other independent evaluators examined the CBCT lesions. Statistical tests were conducted to examine the accuracy, inter-rater reliability, and intrarater reliability of CBCT images. Findings showed that a score of ≥4 positive findings was the optimal scoring system. The accuracies of differential diagnoses of 3 evaluators were moderate (area under the curve = 0.76, 0.70, and 0.69 for evaluators 1, 2, and 3, respectively). The inter-rater agreement of the 3 evaluators was excellent (α = 0.87). The intrarater agreement was good to excellent (κ = 0.71, 0.76, and 0.77). CBCT images can provide a moderately accurate diagnosis between cysts and granulomas. Copyright © 2013 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  5. Intraobserver and interobserver reliability of radial torsion angle measurements by a new and alternative method with computed tomography

    Energy Technology Data Exchange (ETDEWEB)

    Freitas, Luiz Fernando Pinheiro de; Barbieri, Claudio Henrique; Mazzer, Nilton; Zatiti, Salomao Chade Assan; Bellucci, Angela Delete [Universidade de Sao Paulo (FMRP/USP), Ribeirao Preto, SP (Brazil). School of Medicine. Dept. of Biomechanics, Medicine and Rehabilitation; Nogueira-Barbosa, Marcello Henrique, E-mail: marcello@fmrp.usp.b [Universidade de Sao Paulo (FMRP/USP), Ribeirao Preto, SP (Brazil). School of Medicine. Radiology Div.

    2010-07-01

    Objective: to evaluate the intraobserver and interobserver reliability of radial torsion angle measurement using computed tomography. Methods: twelve pairs of cadaver radii and 116 forearms from 58 healthy volunteers were evaluated using axial computed tomography sections measured at the level of the bicipital tuberosity and the subchondral region of the radius. During digital imaging, the angle was formed by two lines, one diametrically perpendicular to the radial tubercle and the other tangential to the volar rim of the distal joint surface. Measurements were performed twice each by three observers. Results: in cadaveric bones, the mean radial torsion angle was 1.48 deg (-6 deg - 9 deg) on the right and 1.62 deg (-6 deg - 8 deg) on the left, with a mean difference between the right and left sides of 1.61 deg (0 deg - 8 deg). In volunteers, the mean radial torsion angle was 3.00 deg (-17 deg - 17 deg) on the right and 2.91 deg (-16 deg- 15 deg) on the left, with a mean difference between the sides of 1.58 deg (0 deg - 7 deg). There was no significant difference between each side. The interobserver correlation coefficient for the cadaver radii measurements was 0.88 (0.72 - 0.96) and 0.81 (0.58 - 0.93) for the right and left radius, respectively, while for the volunteers, the difference was 0.84 (0.77 - 0.90) and 0.83 (0.75 - 0.89), respectively. Intraobserver reliability was high. Conclusion: the described method is reproducible and applicable even when the radial tubercle has a rounded contour. (author)

  6. Analisis Perancangan PC (Personal Computer Router Proxy Untuk Menggabungkan Tiga Jalur Koneksi Di Indospeed

    Directory of Open Access Journals (Sweden)

    Bangun Harizal

    2012-05-01

    Full Text Available Router very important for computer network. To get the router can buy a router products but can also design your own using personal computers. Mikrotik is one of the router manufacturer that provides products in the form of hardware or software. If you want to pay less to design a router can use operating system Ubuntu. This operating system is open source and provided free of charge by the manufacturer. If you want to design a router with this OS can make use of personal computers are often used in homes or offices. Merging the performance of both types of routers can also be usedto cover the lack of one another. With the proxy on a local network then the use of bandwidth can be saved. Becausethere are several websites cached and stored therein if the same website is accessed by other users, the router transmits only from the proxy to the computerwhich make the request.

  7. A reliable computational workflow for the selection of optimal screening libraries.

    Science.gov (United States)

    Gilad, Yocheved; Nadassy, Katalin; Senderowitz, Hanoch

    2015-01-01

    components, it can be easily adapted and reproduced by computational groups interested in rational selection of screening libraries. Furthermore, the workflow could be readily modified to include additional components. This workflow has been routinely used in our laboratory for the selection of libraries in multiple projects and consistently selects libraries which are well balanced across multiple parameters.Graphical abstract.

  8. Does computer-synthesized speech manifest personality? Experimental tests of recognition, similarity-attraction, and consistency-attraction.

    Science.gov (United States)

    Nass, C; Lee, K M

    2001-09-01

    Would people exhibit similarity-attraction and consistency-attraction toward unambiguously computer-generated speech even when personality is clearly not relevant? In Experiment 1, participants (extrovert or introvert) heard a synthesized voice (extrovert or introvert) on a book-buying Web site. Participants accurately recognized personality cues in text to speech and showed similarity-attraction in their evaluation of the computer voice, the book reviews, and the reviewer. Experiment 2, in a Web auction context, added personality of the text to the previous design. The results replicated Experiment 1 and demonstrated consistency (voice and text personality)-attraction. To maximize liking and trust, designers should set parameters, for example, words per minute or frequency range, that create a personality that is consistent with the user and the content being presented.

  9. A Computer-Assisted Personalized Approach in an Undergraduate Plant Physiology Class1

    Science.gov (United States)

    Artus, Nancy N.; Nadler, Kenneth D.

    1999-01-01

    We used Computer-Assisted Personalized Approach (CAPA), a networked teaching and learning tool that generates computer individualized homework problem sets, in our large-enrollment introductory plant physiology course. We saw significant improvement in student examination performance with regular homework assignments, with CAPA being an effective and efficient substitute for hand-graded homework. Using CAPA, each student received a printed set of similar but individualized problems of a conceptual (qualitative) and/or quantitative nature with quality graphics. Because each set of problems is unique, students were encouraged to work together to clarify concepts but were required to do their own work for credit. Students could enter answers multiple times without penalty, and they were able to obtain immediate feedback and hints until the due date. These features increased student time on task, allowing higher course standards and student achievement in a diverse student population. CAPA handles routine tasks such as grading, recording, summarizing, and posting grades. In anonymous surveys, students indicated an overwhelming preference for homework in CAPA format, citing several features such as immediate feedback, multiple tries, and on-line accessibility as reasons for their preference. We wrote and used more than 170 problems on 17 topics in introductory plant physiology, cataloging them in a computer library for general access. Representative problems are compared and discussed. PMID:10198076

  10. A computer-assisted personalized approach in an undergraduate plant physiology class

    Science.gov (United States)

    Artus; Nadler

    1999-04-01

    We used Computer-Assisted Personalized Approach (CAPA), a networked teaching and learning tool that generates computer individualized homework problem sets, in our large-enrollment introductory plant physiology course. We saw significant improvement in student examination performance with regular homework assignments, with CAPA being an effective and efficient substitute for hand-graded homework. Using CAPA, each student received a printed set of similar but individualized problems of a conceptual (qualitative) and/or quantitative nature with quality graphics. Because each set of problems is unique, students were encouraged to work together to clarify concepts but were required to do their own work for credit. Students could enter answers multiple times without penalty, and they were able to obtain immediate feedback and hints until the due date. These features increased student time on task, allowing higher course standards and student achievement in a diverse student population. CAPA handles routine tasks such as grading, recording, summarizing, and posting grades. In anonymous surveys, students indicated an overwhelming preference for homework in CAPA format, citing several features such as immediate feedback, multiple tries, and on-line accessibility as reasons for their preference. We wrote and used more than 170 problems on 17 topics in introductory plant physiology, cataloging them in a computer library for general access. Representative problems are compared and discussed.

  11. Development of 3-D Radiosurgery Planning System Using IBM Personal Computer

    International Nuclear Information System (INIS)

    Suh, Tae Suk; Park, Charn Il; Ha, Sung Whan; Kang, Wee Saing; Suh, Doug Young; Park, Sung Hun

    1993-01-01

    Recently, stereotactic radiosurgery plan is required with the information of 3-D image and dose distribution. A project has been doing if developing LINAC based stereotactic radiosurgery since April 1991. The purpose of this research is to develop 3-D radiosurgery planning system using personal computer. The procedure of this research is based on two steps. The first step is to develop 3-D localization system, which input the image information of the patient, coordinate transformation, the position and shape of target, and patient contour into computer system using CT image and stereotactic frame. The second step is to develop 3-D dose planning system, which compute dose distribution on image plane, display on high resolution monitor both isodose distribution and patient image simultaneously and develop menu-driven planning system. This prototype of radiosurgery planning system was applied recently for several clinical cases. It was shown that our planning system is fast, accurate and efficient while making it possible to handle various kinds of image modalities such as angiography, CT and MRI. It makes it possible to develop general 3-D planning system using beam eye view or CT simulation in radiation therapy in future

  12. VAT: a computational framework to functionally annotate variants in personal genomes within a cloud-computing environment.

    Science.gov (United States)

    Habegger, Lukas; Balasubramanian, Suganthi; Chen, David Z; Khurana, Ekta; Sboner, Andrea; Harmanci, Arif; Rozowsky, Joel; Clarke, Declan; Snyder, Michael; Gerstein, Mark

    2012-09-01

    The functional annotation of variants obtained through sequencing projects is generally assumed to be a simple intersection of genomic coordinates with genomic features. However, complexities arise for several reasons, including the differential effects of a variant on alternatively spliced transcripts, as well as the difficulty in assessing the impact of small insertions/deletions and large structural variants. Taking these factors into consideration, we developed the Variant Annotation Tool (VAT) to functionally annotate variants from multiple personal genomes at the transcript level as well as obtain summary statistics across genes and individuals. VAT also allows visualization of the effects of different variants, integrates allele frequencies and genotype data from the underlying individuals and facilitates comparative analysis between different groups of individuals. VAT can either be run through a command-line interface or as a web application. Finally, in order to enable on-demand access and to minimize unnecessary transfers of large data files, VAT can be run as a virtual machine in a cloud-computing environment. VAT is implemented in C and PHP. The VAT web service, Amazon Machine Image, source code and detailed documentation are available at vat.gersteinlab.org.

  13. Evaluation of user input methods for manipulating a tablet personal computer in sterile techniques.

    Science.gov (United States)

    Yamada, Akira; Komatsu, Daisuke; Suzuki, Takeshi; Kurozumi, Masahiro; Fujinaga, Yasunari; Ueda, Kazuhiko; Kadoya, Masumi

    2017-02-01

    To determine a quick and accurate user input method for manipulating tablet personal computers (PCs) in sterile techniques. We evaluated three different manipulation methods, (1) Computer mouse and sterile system drape, (2) Fingers and sterile system drape, and (3) Digitizer stylus and sterile ultrasound probe cover with a pinhole, in terms of the central processing unit (CPU) performance, manipulation performance, and contactlessness. A significant decrease in CPU score ([Formula: see text]) and an increase in CPU temperature ([Formula: see text]) were observed when a system drape was used. The respective mean times taken to select a target image from an image series (ST) and the mean times for measuring points on an image (MT) were [Formula: see text] and [Formula: see text] s for the computer mouse method, [Formula: see text] and [Formula: see text] s for the finger method, and [Formula: see text] and [Formula: see text] s for the digitizer stylus method, respectively. The ST for the finger method was significantly longer than for the digitizer stylus method ([Formula: see text]). The MT for the computer mouse method was significantly longer than for the digitizer stylus method ([Formula: see text]). The mean success rate for measuring points on an image was significantly lower for the finger method when the diameter of the target was equal to or smaller than 8 mm than for the other methods. No significant difference in the adenosine triphosphate amount at the surface of the tablet PC was observed before, during, or after manipulation via the digitizer stylus method while wearing starch-powdered sterile gloves ([Formula: see text]). Quick and accurate manipulation of tablet PCs in sterile techniques without CPU load is feasible using a digitizer stylus and sterile ultrasound probe cover with a pinhole.

  14. RGCA: A Reliable GPU Cluster Architecture for Large-Scale Internet of Things Computing Based on Effective Performance-Energy Optimization.

    Science.gov (United States)

    Fang, Yuling; Chen, Qingkui; Xiong, Neal N; Zhao, Deyu; Wang, Jingjuan

    2017-08-04

    This paper aims to develop a low-cost, high-performance and high-reliability computing system to process large-scale data using common data mining algorithms in the Internet of Things (IoT) computing environment. Considering the characteristics of IoT data processing, similar to mainstream high performance computing, we use a GPU (Graphics Processing Unit) cluster to achieve better IoT services. Firstly, we present an energy consumption calculation method (ECCM) based on WSNs. Then, using the CUDA (Compute Unified Device Architecture) Programming model, we propose a Two-level Parallel Optimization Model (TLPOM) which exploits reasonable resource planning and common compiler optimization techniques to obtain the best blocks and threads configuration considering the resource constraints of each node. The key to this part is dynamic coupling Thread-Level Parallelism (TLP) and Instruction-Level Parallelism (ILP) to improve the performance of the algorithms without additional energy consumption. Finally, combining the ECCM and the TLPOM, we use the Reliable GPU Cluster Architecture (RGCA) to obtain a high-reliability computing system considering the nodes' diversity, algorithm characteristics, etc. The results show that the performance of the algorithms significantly increased by 34.1%, 33.96% and 24.07% for Fermi, Kepler and Maxwell on average with TLPOM and the RGCA ensures that our IoT computing system provides low-cost and high-reliability services.

  15. A Personal Computer-Based Simulator for Nuclear-Heating Reactors

    International Nuclear Information System (INIS)

    Liu Jie; Zhang Zuoyi; Lu Dongsen; Shi Zhengang; Chen Xiaoming; Dong Yujie

    2000-01-01

    A personal computer (PC)-based simulator for nuclear-heating reactors (NHRs), PC-NHR, has been developed to provide an educational tool for understanding the design and operational characteristics of an NHR system. A general description of the reactor system as well as the technical basis for the design and operation of the heating reactor is provided. The basic models and equations for the NHR simulation are then given, which include models of the reactor core, the reactor coolant system, the containment, and the control system. The graphical user interface is described in detail to provide a manual for the user to operate the simulator properly. Steady state and several transients have been simulated. The results of PC-NHR are in good agreement with design data and the results of RETRAN-02. The real-time capability is also confirmed

  16. Application of a personal computer relational data base management system to fuel cycle economic scoping

    International Nuclear Information System (INIS)

    Malone, J.P.; Dooley, G.D.

    1986-01-01

    A personal computer (PC) relational data base management system (RDBMS) permits large quantities of data to be maintained in a data base composed of structured data sets or files and provides data access through a software environment, procedure, or program language. The features of an RDBMS-based system create an environment on a PC that can provide significant benefits to any fuel cycle economics analysis. The ability to maintain a separate data set for each fuel cycle parameter group and the ability to manipulate the data through a series of independent calculation modules combine to provide the fuel cycle analyst with more time to examine and use the data, because less time is required to manipulate it

  17. Development of a personal computer based facility-level SSAC component and inspector support system

    International Nuclear Information System (INIS)

    Markov, A.

    1989-08-01

    Research Contract No. 4658/RB was conducted between the IAEA and the Bulgarian Committee on Use of Atomic Energy for Peaceful Purposes. The contract required the Committee to develop and program a personal computer based software package to be used as a facility-level computerized State System of Accounting and Control (SSAC) at an off-load power reactor. The software delivered, called the National Safeguards System (NSS) keeps track of all fuel assembly activity at a power reactor and generates all ledgers, MBA material balances and any required reports to national or international authorities. The NSS is designed to operate on a PC/AT or compatible equipment with a hard disk of 20 MB, color graphics monitor or adaptor and at least one floppy disk drive, 360 Kb. The programs are written in Basic (compiler 2.0). They are executed under MS DOS 3.1 or later

  18. [The digital reprocessing of under- and overexposed x-ray films with a personal computer].

    Science.gov (United States)

    Fuhrmann, R; Diedrich, P

    1993-02-01

    An image processing work station for digitalizing and interactively manipulating under- and overexposed X-rays was set up by adding modules to an IBM compatible personal computer. Overexposed X-rays can be qualitatively enhanced by means of controlled manipulation of contrast and brightness and by means of the use of various digital filtering techniques. With underexposed X-rays an equalized grey scale can be achieved by means of regulating contrast and brightness. Digital filtering is not required. To assure a high degree of anatomical detail (periodontal ligament) in the digitalized image a maximum pixel of 0.1 mm was defined as a qualitative norm. Since in every digitalization process resolution is diminished, it proved best to select for interactive manipulation out of the total image only the section of interest.

  19. Neutron shielding point kernel integral calculation code for personal computer: PKN-pc

    International Nuclear Information System (INIS)

    Kotegawa, Hiroshi; Sakamoto, Yukio; Nakane, Yoshihiro; Tomita, Ken-ichi; Kurosawa, Naohiro.

    1994-07-01

    A personal computer version of PKN code, PKN-pc, has been developed to calculate neutron and secondary gamma-ray 1cm depth dose equivalents in water, ordinary concrete and iron for neutron source. Characteristics of PKN code are, to able to calculate dose equivalents in multi-layer three-dimensional system, which are described with two-dimensional surface, for monoenergetic neutron source from 0.01 to 14.9 MeV, 252 Cf fission and 241 Am-Be neutron source quick and easily. In addition to these features, the PKN-pc is possible to process interactive input and to get graphical system configuration and graphical results easily. (author)

  20. Reliability and validity of the Minnesota Multiphasic Personality Inventory-2-Restructured Form (MMPI-2-RF) in evaluations of chronic low back pain patients.

    Science.gov (United States)

    Tarescavage, Anthony M; Scheman, Judith; Ben-Porath, Yossef S

    2015-06-01

    The purpose of the current study was to investigate the reliability and concurrent validity of Minnesota Multiphasic Personality Inventory (MMPI)-2-Restructured Form (2-RF) (Ben-Porath & Tellegen, 2008/2011) scores in a sample of 811 chronic low back pain patients (346 males, 529 females) beginning treatment in a short-term interdisciplinary pain rehabilitation program. We calculated internal consistency coefficients, mean-item correlations, and SEM for all substantive scales, as well as zero-order correlations with collateral medical record information and self-report testing. Results indicated reliability and validity for most of the MMPI-2-RF substantive scales. Implications of these findings and limitations of this study are discussed. (c) 2015 APA, all rights reserved).

  1. Reliability and prevalence of physical performance examination assessing mobility and balance in older persons in the US: data from the Third National Health and Nutrition Examination Survey.

    Science.gov (United States)

    Ostchega, Y; Harris, T B; Hirsch, R; Parsons, V L; Kington, R; Katzoff, M

    2000-09-01

    This report provides reliability and prevalence estimates by sex, age, and race/ethnicity of an observed physical performance examination (PPE) assessing mobility and balance. The Third National Health and Nutrition Examination Survey (NHANES III) 1988-1994. A cross-sectional nationally representative survey. All persons aged 60 and older (n = 5,403) who performed the PPE either in the mobile examination center (MEC) or in the home during NHANES III (conducted 1988-1994). The PPE included timed chair stand, full tandem stand, and timed 8-foot walk. Timed chair stand and 8-foot timed walk were reliable measurements (Intraclass Correlations > 0.5). Women were significantly slower (P physically limited than men.

  2. Transmission of DICOM 3.0 type MR data to the personal computer in the hospital without PACS

    International Nuclear Information System (INIS)

    Lee, Seon Kyu; Kim, Hak Soo; Hwang, Hee Young; Kim, Ji Hye; Chung, Hyo Sun; Kim, Hyung Sik

    1999-01-01

    To transmit DICOM data to a personal computer in the hospital without PACS, and estimate the usefulness of digital image management and its convenience for physicians through transmitted file size, transmission time and quality of transmitted images. The raw data of three brain MRI and lumbar spine MRI were transmitted from an MR system to a personal computer via Ethernet TCP/IP connection. The file size and transmission time of transmitted images were measured according to the matrix number. Three board-certified radiologists compared the image quality of the transmitted and scanned images. The transmission of DICOM data to the personal computer was successful and the transmitted images and their header information were displayed by various personal computer-based DICOM viewing programs. The file size and transmission time of the 256 and 512 matrix images were 136 Kbyte, 2.17 seconds/slice and 520 Kbyte, 4.37 seconds/slice, respectively. All radiologists regarded the transmitted brain MRI images as superior. One radiologist considered the transmitted lumbar spine MRI images superior, while others decided that the quality of transmitted and scanned images was the same. The transmission of DICOM format image data to a personal computer through an appropriate DICOM receiving program is useful for managing digital images and convenient for physicians in the hospital without PACS

  3. Reliability and validity of the revised Gibson Test of Cognitive Skills, a computer-based test battery for assessing cognition across the lifespan.

    Science.gov (United States)

    Moore, Amy Lawson; Miller, Terissa M

    2018-01-01

    The purpose of the current study is to evaluate the validity and reliability of the revised Gibson Test of Cognitive Skills, a computer-based battery of tests measuring short-term memory, long-term memory, processing speed, logic and reasoning, visual processing, as well as auditory processing and word attack skills. This study included 2,737 participants aged 5-85 years. A series of studies was conducted to examine the validity and reliability using the test performance of the entire norming group and several subgroups. The evaluation of the technical properties of the test battery included content validation by subject matter experts, item analysis and coefficient alpha, test-retest reliability, split-half reliability, and analysis of concurrent validity with the Woodcock Johnson III Tests of Cognitive Abilities and Tests of Achievement. Results indicated strong sources of evidence of validity and reliability for the test, including internal consistency reliability coefficients ranging from 0.87 to 0.98, test-retest reliability coefficients ranging from 0.69 to 0.91, split-half reliability coefficients ranging from 0.87 to 0.91, and concurrent validity coefficients ranging from 0.53 to 0.93. The Gibson Test of Cognitive Skills-2 is a reliable and valid tool for assessing cognition in the general population across the lifespan.

  4. The Perceived Personal Control (PPC) questionnaire as an outcome of genetic counseling: reliability and validity of the instrument.

    NARCIS (Netherlands)

    Smets, E.M.A.; Pieterse, A.H.; Aalfs, C.M.; Ausems, M.G.E.M.; Dulmen, A.M. van

    2006-01-01

    The perceived personal control (PPC) questionnaire was developed by Berkenstadt and colleagues as an outcome measure for the evaluation of the process of genetic counseling. The present study aimed to further assess the psychometric properties of a Dutch version of the instrument. Data were used

  5. Using a Personal Device to Strengthen Password Authentication from an Untrusted Computer

    Science.gov (United States)

    Mannan, Mohammad; van Oorschot, P. C.

    Keylogging and phishing attacks can extract user identity and sensitive account information for unauthorized access to users' financial accounts. Most existing or proposed solutions are vulnerable to session hijacking attacks. We propose a simple approach to counter these attacks, which cryptographically separates a user's long-term secret input from (typically untrusted) client PCs; a client PC performs most computations but has access only to temporary secrets. The user's long-term secret (typically short and low-entropy) is input through an independent personal trusted device such as a cellphone. The personal device provides a user's long-term secrets to a client PC only after encrypting the secrets using a pre-installed, "correct" public key of a remote service (the intended recipient of the secrets). The proposed protocol (MP-Auth) realizes such an approach, and is intended to safeguard passwords from keyloggers, other malware (including rootkits), phishing attacks and pharming, as well as to provide transaction security to foil session hijacking. We report on a prototype implementation of MP-Auth, and provide a comparison of web authentication techniques that use an additional factor of authentication (e.g. a cellphone, PDA or hardware token).

  6. The rating reliability calculator

    Directory of Open Access Journals (Sweden)

    Solomon David J

    2004-04-01

    Full Text Available Abstract Background Rating scales form an important means of gathering evaluation data. Since important decisions are often based on these evaluations, determining the reliability of rating data can be critical. Most commonly used methods of estimating reliability require a complete set of ratings i.e. every subject being rated must be rated by each judge. Over fifty years ago Ebel described an algorithm for estimating the reliability of ratings based on incomplete data. While his article has been widely cited over the years, software based on the algorithm is not readily available. This paper describes an easy-to-use Web-based utility for estimating the reliability of ratings based on incomplete data using Ebel's algorithm. Methods The program is available public use on our server and the source code is freely available under GNU General Public License. The utility is written in PHP, a common open source imbedded scripting language. The rating data can be entered in a convenient format on the user's personal computer that the program will upload to the server for calculating the reliability and other statistics describing the ratings. Results When the program is run it displays the reliability, number of subject rated, harmonic mean number of judges rating each subject, the mean and standard deviation of the averaged ratings per subject. The program also displays the mean, standard deviation and number of ratings for each subject rated. Additionally the program will estimate the reliability of an average of a number of ratings for each subject via the Spearman-Brown prophecy formula. Conclusion This simple web-based program provides a convenient means of estimating the reliability of rating data without the need to conduct special studies in order to provide complete rating data. I would welcome other researchers revising and enhancing the program.

  7. Pediatric personalized CT-dosimetry Monte Carlo simulations, using computational phantoms

    International Nuclear Information System (INIS)

    Papadimitroulas, P; Kagadis, G C; Ploussi, A; Kordolaimi, S; Papamichail, D; Karavasilis, E; Syrgiamiotis, V; Loudos, G

    2015-01-01

    The last 40 years Monte Carlo (MC) simulations serve as a “gold standard” tool for a wide range of applications in the field of medical physics and tend to be essential in daily clinical practice. Regarding diagnostic imaging applications, such as computed tomography (CT), the assessment of deposited energy is of high interest, so as to better analyze the risks and the benefits of the procedure. The last few years a big effort is done towards personalized dosimetry, especially in pediatric applications. In the present study the GATE toolkit was used and computational pediatric phantoms have been modeled for the assessment of CT examinations dosimetry. The pediatric models used come from the XCAT and IT'IS series. The X-ray spectrum of a Brightspeed CT scanner was simulated and validated with experimental data. Specifically, a DCT-10 ionization chamber was irradiated twice using 120 kVp with 100 mAs and 200 mAs, for 1 sec in 1 central axial slice (thickness = 10mm). The absorbed dose was measured in air resulting in differences lower than 4% between the experimental and simulated data. The simulations were acquired using ∼10 10 number of primaries in order to achieve low statistical uncertainties. Dose maps were also saved for quantification of the absorbed dose in several children critical organs during CT acquisition. (paper)

  8. Advancement of the state system of accounting for mainframe to personal computer (PC) technology

    International Nuclear Information System (INIS)

    Proco, G.; Nardi, J.

    1999-01-01

    The advancement of the U.S. government's state system of accounting from a mainframe computer to a personal computer (PC) had been successfully completed. The accounting system, from 1965 until 1995 a mainframe application, was replaced in September 1995 by an accounting system employing local area network (LAN) capabilities and other state-of-the-art characteristics. The system is called the Nuclear Materials Management and Safeguards System (NMMSS), tracking nuclear material activities and providing accounting reports for a variety of government and private users. The uses of the system include not only the tracking of nuclear materials for international and domestic safeguards purposes but also serving to facilitate the government's resource management purposes as well. The system was converted to PC hardware and fourth generation software to improve upon the mainframe system. The change was motivated by the desire to have a system amenable to frequent modifications, to improve upon services to users and to reduce increasing operating costs. Based on two years of operating the new system, it is clear that these objectives were met. Future changes to the system are inevitable and the national system of accounting for nuclear materials has the technology base to meet the challenges with proven capability. (author)

  9. Towards personalized computational oncology: from spatial models of tumour spheroids, to organoids, to tissues.

    Science.gov (United States)

    Karolak, Aleksandra; Markov, Dmitry A; McCawley, Lisa J; Rejniak, Katarzyna A

    2018-01-01

    A main goal of mathematical and computational oncology is to develop quantitative tools to determine the most effective therapies for each individual patient. This involves predicting the right drug to be administered at the right time and at the right dose. Such an approach is known as precision medicine. Mathematical modelling can play an invaluable role in the development of such therapeutic strategies, since it allows for relatively fast, efficient and inexpensive simulations of a large number of treatment schedules in order to find the most effective. This review is a survey of mathematical models that explicitly take into account the spatial architecture of three-dimensional tumours and address tumour development, progression and response to treatments. In particular, we discuss models of epithelial acini, multicellular spheroids, normal and tumour spheroids and organoids, and multi-component tissues. Our intent is to showcase how these in silico models can be applied to patient-specific data to assess which therapeutic strategies will be the most efficient. We also present the concept of virtual clinical trials that integrate standard-of-care patient data, medical imaging, organ-on-chip experiments and computational models to determine personalized medical treatment strategies. © 2018 The Author(s).

  10. Application of personal computer to development of entrance management system for radiating facilities

    International Nuclear Information System (INIS)

    Suzuki, Shogo; Hirai, Shouji

    1989-01-01

    The report describes a system for managing the entrance and exit of personnel to radiating facilities. A personal computer is applied to its development. Major features of the system is outlined first. The computer is connected to the gate and two magnetic card readers provided at the gate. The gate, which is installed at the entrance to a room under control, opens only for those who have a valid card. The entrance-exit management program developed is described next. The following three files are used: ID master file (random file of the magnetic card number, name, qualification, etc., of each card carrier), entrance-exit management file (random file of time of entrance/exit, etc., updated everyday), and entrance-exit record file (sequential file of card number, name, date, etc.), which are stored on floppy disks. A display is provided to show various lists including a list of workers currently in the room and a list of workers who left the room at earlier times of the day. This system is useful for entrance management of a relatively small facility. Though small in required cost, it requires only a few operators to perform effective personnel management. (N.K.)

  11. A management system of data for department of diagnostic radiology and patients using the personal computer

    International Nuclear Information System (INIS)

    Kim, Jin Hee; Park, Tae Joon; Choi, Tae Haing; Lim, Se Hwan; Joon Yang Noh; Kim, Sung Jin

    1996-01-01

    With the use of personal computers generalized, departmental society leveled computerization is going on in some other departments. So we tried to develop a program having a simple user interface, various retrieval functions and, analytic and statistic process system to effectively help patient care suitable for works concerned with department of diagnostic radiology and works of department. This program deals with such target works as department of diagnostic radiology and some works to need a lot of bookkeeping. It is deviced to operate with Windows (Microsoft, America), and central processing unit(486DX-2), memory unit(8 Mbyte). As a developmental tool, Foxpro 2.6 for windows R (Microsoft, America). This program can be easily accessed even by staffs poor at computer and it can make many books recording various check-ups and operations unnecessary, which were difficult to keep. Besides, it can keep data as a unified form, and so it provides patient care and other works with convenience and helps applying those stored data scientific research. The above result shows that works of department can be effectively controlled by analyzing or printing various check-up and operation done by department of diagnostic radiology

  12. A PC [personal computer]-based version of KENO V.a

    International Nuclear Information System (INIS)

    Nigg, D.A.; Atkinson, C.A.; Briggs, J.B.; Taylor, J.T.

    1990-01-01

    The use of personal computers (PCs) and engineering workstations for complex scientific computations has expanded rapidly in the last few years. This trend is expected to continue in the future with the introduction of increasingly sophisticated microprocessors and microcomputer systems. For a number of reasons, including security, economy, user convenience, and productivity, an integrated system of neutronics and radiation transport software suitable for operation in an IBM PC-class environment has been under development at the Idaho National Engineering Laboratory (INEL) for the past 3 yr. Nuclear cross-section data and resonance parameters are preprocessed from the Evaluated Nuclear Data Files Version 5 (ENDF/B-V) and supplied in a form suitable for use in a PC-based spectrum calculation and multigroup cross-section generation module. This module produces application-specific data libraries that can then be used in various neutron transport and diffusion theory code modules. This paper discusses several details of the Monte Carlo criticality module, which is based on the well-known highly-sophisticated KENO V.a package developed at Oak Ridge National Laboratory and previously released in mainframe form by the Radiation Shielding Information Center (RSIC). The conversion process and a variety of benchmarking results are described

  13. Kinematics of fast cervical rotations in persons with chronic neck pain: a cross-sectional and reliability study.

    Science.gov (United States)

    Röijezon, Ulrik; Djupsjöbacka, Mats; Björklund, Martin; Häger-Ross, Charlotte; Grip, Helena; Liebermann, Dario G

    2010-09-27

    Assessment of sensorimotor function is useful for classification and treatment evaluation of neck pain disorders. Several studies have investigated various aspects of cervical motor functions. Most of these have involved slow or self-paced movements, while few have investigated fast cervical movements. Moreover, the reliability of assessment of fast cervical axial rotation has, to our knowledge, not been evaluated before. Cervical kinematics was assessed during fast axial head rotations in 118 women with chronic nonspecific neck pain (NS) and compared to 49 healthy controls (CON). The relationship between cervical kinematics and symptoms, self-rated functioning and fear of movement was evaluated in the NS group. A sub-sample of 16 NS and 16 CON was re-tested after one week to assess the reliability of kinematic variables. Six cervical kinematic variables were calculated: peak speed, range of movement, conjunct movements and three variables related to the shape of the speed profile. Together, peak speed and conjunct movements had a sensitivity of 76% and a specificity of 78% in discriminating between NS and CON, of which the major part could be attributed to peak speed (NS: 226 ± 88°/s and CON: 348 ± 92°/s, p conjunct movements was poor. Peak speed of fast cervical axial rotations is reduced in people with chronic neck pain, and even further reduced in subjects with concomitant low back pain. Fast cervical rotation test seems to be a reliable and valid tool for assessment of neck pain disorders on group level, while a rather large between subject variation and overlap between groups calls for caution in the interpretation of individual assessments.

  14. Accuracy and reliability of a novel method for fusion of digital dental casts and Cone Beam Computed Tomography scans.

    Directory of Open Access Journals (Sweden)

    Frits A Rangel

    Full Text Available Several methods have been proposed to integrate digital models into Cone Beam Computed Tomography scans. Since all these methods have some drawbacks such as radiation exposure, soft tissue deformation and time-consuming digital handling processes, we propose a new method to integrate digital dental casts into Cone Beam Computed Tomography scans. Plaster casts of 10 patients were randomly selected and 5 titanium markers were glued to the upper and lower plaster cast. The plaster models were scanned, impressions were taken from the plaster models and the impressions were also scanned. Linear measurements were performed on all three models, to assess accuracy and reproducibility. Besides that, matching of the scanned plaster models and scanned impressions was done, to assess the accuracy of the matching procedure. Results show that all measurement errors are smaller than 0.2 mm, and that 81% is smaller than 0.1 mm. Matching of the scanned plaster casts and scanned impressions show a mean error between the two surfaces of the upper arch of 0.14 mm and for the lower arch of 0.18 mm. The time needed for reconstructing the CBCT scans to a digital patient, where the impressions are integrated into the CBCT scan of the patient takes about 15 minutes, with little variance between patients. In conclusion, we can state that this new method is a reliable method to integrate digital dental casts into CBCT scans. As far as radiation exposure, soft tissue deformation and digital handling processes are concerned, it is a significant improvement compared to the previously published methods.

  15. Accuracy and Reliability of a Novel Method for Fusion of Digital Dental Casts and Cone Beam Computed Tomography Scans

    Science.gov (United States)

    Rangel, Frits A.; Maal, Thomas J. J.; Bronkhorst, Ewald M.; Breuning, K. Hero; Schols, Jan G. J. H.; Bergé, Stefaan J.; Kuijpers-Jagtman, Anne Marie

    2013-01-01

    Several methods have been proposed to integrate digital models into Cone Beam Computed Tomography scans. Since all these methods have some drawbacks such as radiation exposure, soft tissue deformation and time-consuming digital handling processes, we propose a new method to integrate digital dental casts into Cone Beam Computed Tomography scans. Plaster casts of 10 patients were randomly selected and 5 titanium markers were glued to the upper and lower plaster cast. The plaster models were scanned, impressions were taken from the plaster models and the impressions were also scanned. Linear measurements were performed on all three models, to assess accuracy and reproducibility. Besides that, matching of the scanned plaster models and scanned impressions was done, to assess the accuracy of the matching procedure. Results show that all measurement errors are smaller than 0.2 mm, and that 81% is smaller than 0.1 mm. Matching of the scanned plaster casts and scanned impressions show a mean error between the two surfaces of the upper arch of 0.14 mm and for the lower arch of 0.18 mm. The time needed for reconstructing the CBCT scans to a digital patient, where the impressions are integrated into the CBCT scan of the patient takes about 15 minutes, with little variance between patients. In conclusion, we can state that this new method is a reliable method to integrate digital dental casts into CBCT scans. As far as radiation exposure, soft tissue deformation and digital handling processes are concerned, it is a significant improvement compared to the previously published methods. PMID:23527111

  16. The sensitivity of computed tomography (CT) scans in detecting trauma: are CT scans reliable enough for courtroom testimony?

    Science.gov (United States)

    Molina, D Kimberley; Nichols, Joanna J; Dimaio, Vincent J M

    2007-09-01

    Rapid and accurate recognition of traumatic injuries is extremely important in emergency room and surgical settings. Emergency departments depend on computed tomography (CT) scans to provide rapid, accurate injury assessment. We conducted an analysis of all traumatic deaths autopsied at the Bexar County Medical Examiner's Office in which perimortem medical imaging (CT scan) was performed to assess the reliability of the CT scan in detecting trauma with sufficient accuracy for courtroom testimony. Cases were included in the study if an autopsy was conducted, a CT scan was performed within 24 hours before death, and there was no surgical intervention. Analysis was performed to assess the correlation between the autopsy and CT scan results. Sensitivity, specificity, positive predictive value, and negative predictive value were defined for the CT scan based on the autopsy results. The sensitivity of the CT scan ranged from 0% for cerebral lacerations, cervical vertebral body fractures, cardiac injury, and hollow viscus injury to 75% for liver injury. This study reveals that CT scans are an inadequate detection tool for forensic pathologists, where a definitive diagnosis is required, because they have a low level of accuracy in detecting traumatic injuries. CT scans may be adequate for clinicians in the emergency room setting, but are inadequate for courtroom testimony. If the evidence of trauma is based solely on CT scan reports, there is a high possibility of erroneous accusations, indictments, and convictions.

  17. The Personality Inventory for DSM-5 Brief Form: Evidence for Reliability and Construct Validity in a Sample of Community-Dwelling Italian Adolescents.

    Science.gov (United States)

    Fossati, Andrea; Somma, Antonella; Borroni, Serena; Markon, Kristian E; Krueger, Robert F

    2017-07-01

    To assess the reliability and construct validity of the Personality Inventory for DSM-5 Brief Form (PID-5-BF) among adolescents, 877 Italian high school students were administered the PID-5-BF. Participants were administered also the Measure of Disordered Personality Functioning (MDPF) as a criterion measure. In the full sample, Cronbach's alpha values for the PID-5-BF scales ranged from .59 (Detachment) to .77 (Psychoticism); in addition, all PID-5-BF scales showed mean interitem correlation values in the .22 to .40 range. Cronbach's alpha values for the PID-5-BF total score was .83 (mean interitem r = .16). Although 2-month test-retest reliability could be assessed only in a small ( n = 42) subsample of participants, all PID-5-BF scale scores showed adequate temporal stability, as indexed by intraclass r values ranging from .78 (Negative Affectivity) to .97 (Detachment), all ps <.001. Exploratory structural equation modeling analyses provided at least moderate support for the a priori model of PID-5-BF items. Multiple regression analyses showed that PID-5-BF scales predicted a nonnegligible amount of variance in MDPF Non-Cooperativeness, adjusted R 2 = .17, p < .001, and Non-Coping scales, adjusted R 2 = .32, p < .001. Similarly, the PID-5-BF total score was a significant predictor of both MDPF Non-Coping, and Non-Cooperativeness scales.

  18. Use of personal computers in performing a linear modal analysis of a large finite-element model

    International Nuclear Information System (INIS)

    Wagenblast, G.R.

    1991-01-01

    This paper presents the use of personal computers in performing a dynamic frequency analysis of a large (2,801 degrees of freedom) finite-element model. Large model linear time history dynamic evaluations of safety related structures were previously restricted to mainframe computers using direct integration analysis methods. This restriction was a result of the limited memory and speed of personal computers. With the advances in memory capacity and speed of the personal computers, large finite-element problems now can be solved in the office in a timely and cost effective manner. Presented in three sections, this paper describes the procedure used to perform the dynamic frequency analysis of the large (2,801 degrees of freedom) finite-element model on a personal computer. Section 2.0 describes the structure and the finite-element model that was developed to represent the structure for use in the dynamic evaluation. Section 3.0 addresses the hardware and software used to perform the evaluation and the optimization of the hardware and software operating configuration to minimize the time required to perform the analysis. Section 4.0 explains the analysis techniques used to reduce the problem to a size compatible with the hardware and software memory capacity and configuration

  19. Quality of Life among Persons with HIV/AIDS in Iran: Internal Reliability and Validity of an International Instrument and Associated Factors

    Directory of Open Access Journals (Sweden)

    Pedram Razavi

    2012-01-01

    Full Text Available The purpose of this cross-sectional study on 191 HIV/AIDS patient was to prepare the first Persian translation of complete WHOQOL-HIV instrument, evaluate its reliability and validity, and apply it to determine quality of life and its associated factors in Tehran, Iran. Student's t-test was used to compare quality of life between groups. Mean Cronbach’s α of facets in all six domains of instrument were more than 0.6 indicating good reliability. Item/total corrected correlations coefficients had a lower limit of more than 0.5 in all facets except for association between energy and fatigue facet and physical domain. Compared to younger participants, patients older than 35 years had significantly lower scores in overall quality of life (P = 0.003, social relationships (P = 0.021, and spirituality/religion/personal beliefs (P = 0.024. Unemployed patients had significantly lower scores in overall quality of life (P = 0.01, level of independence (P = 0.004, and environment (P = 0.001 compared to employed participants. This study demonstrated that the standard, complete WHOQOL-HIV 120 instrument translated into Farsi and evaluated among Iranian participants provides a reliable and valid basis for future research on quality of life for HIV and other patients in Iran.

  20. Real-Time Observation of Apathy in Long-Term Care Residents With Dementia: Reliability of the Person-Environment Apathy Rating Scale.

    Science.gov (United States)

    Jao, Ying-Ling; Mogle, Jacqueline; Williams, Kristine; McDermott, Caroline; Behrens, Liza

    2018-04-01

    Apathy is prevalent in individuals with dementia. Lack of responsiveness to environmental stimulation is a key characteristic of apathy. The Person-Environment Apathy Rating (PEAR) scale consists of environment and apathy subscales, which allow for examination of environmental impact on apathy. The interrater reliability of the PEAR scale was examined via real-time observation. The current study included 45 observations of 15 long-term care residents with dementia. Each participant was observed at three time points for 10 minutes each. Two raters observed the participant and surrounding environment and independently rated the participant's apathy and environmental stimulation using the PEAR scale. Weighted Kappa was 0.5 to 0.82 for the PEAR-Environment subscale and 0.5 to 0.8 for the PEAR-Apathy subscale. Overall, with the exception of three items with relatively weak reliability (0.50 to 0.56), the PEAR scale showed moderate to strong interrater reliability (0.63 to 0.82). The results support the use of the PEAR scale to measure environmental stimulation and apathy via real-time observation in long-term care residents with dementia. [Journal of Gerontological Nursing, 44(4), 23-28.]. Copyright 2018, SLACK Incorporated.

  1. A CAMAC crate controller KK009 for the Pravetz-16 and IBM PC/XT personal computers

    International Nuclear Information System (INIS)

    Georgiev, A.; Churin, I.N.

    1988-01-01

    A CAMAC crate controller and a computer bus adapter for the Pravetz 16 and IBM PC/XT personal computers are described. The following features are included in the controller: operation under program control; access to CAMAC registers treated as memory locations corresponding to given N, A, F; hardware for fast LAM processing and execution of multi-crate commands; device up to 7 crates in one CAMAC system; built-in hardware for controller and crate dataway test

  2. Reliability of Sleep Measures from Four Personal Health Monitoring Devices Compared to Research-Based Actigraphy and Polysomnography

    Directory of Open Access Journals (Sweden)

    Janna Mantua

    2016-05-01

    Full Text Available Polysomnography (PSG is the “gold standard” for monitoring sleep. Alternatives to PSG are of interest for clinical, research, and personal use. Wrist-worn actigraph devices have been utilized in research settings for measures of sleep for over two decades. Whether sleep measures from commercially available devices are similarly valid is unknown. We sought to determine the validity of five wearable devices: Basis Health Tracker, Misfit Shine, Fitbit Flex, Withings Pulse O2, and a research-based actigraph, Actiwatch Spectrum. We used Wilcoxon Signed Rank tests to assess differences between devices relative to PSG and correlational analysis to assess the strength of the relationship. Data loss was greatest for Fitbit and Misfit. For all devices, we found no difference and strong correlation of total sleep time with PSG. Sleep efficiency differed from PSG for Withings, Misfit, Fitbit, and Basis, while Actiwatch mean values did not differ from that of PSG. Only mean values of sleep efficiency (time asleep/time in bed from Actiwatch correlated with PSG, yet this correlation was weak. Light sleep time differed from PSG (nREM1 + nREM2 for all devices. Measures of Deep sleep time did not differ from PSG (SWS + REM for Basis. These results reveal the current strengths and limitations in sleep estimates produced by personal health monitoring devices and point to a need for future development.

  3. Validity, reliability, and reproducibility of linear measurements on digital models obtained from intraoral and cone-beam computed tomography scans of alginate impressions

    NARCIS (Netherlands)

    Wiranto, Matthew G.; Engelbrecht, W. Petrie; Nolthenius, Heleen E. Tutein; van der Meer, W. Joerd; Ren, Yijin

    INTRODUCTION: Digital 3-dimensional models are widely used for orthodontic diagnosis. The aim of this study was to assess the validity, reliability, and reproducibility of digital models obtained from the Lava Chairside Oral scanner (3M ESPE, Seefeld, Germany) and cone-beam computed tomography scans

  4. LABORATORY PROCESS CONTROLLER USING NATURAL LANGUAGE COMMANDS FROM A PERSONAL COMPUTER

    Science.gov (United States)

    Will, H.

    1994-01-01

    The complex environment of the typical research laboratory requires flexible process control. This program provides natural language process control from an IBM PC or compatible machine. Sometimes process control schedules require changes frequently, even several times per day. These changes may include adding, deleting, and rearranging steps in a process. This program sets up a process control system that can either run without an operator, or be run by workers with limited programming skills. The software system includes three programs. Two of the programs, written in FORTRAN77, record data and control research processes. The third program, written in Pascal, generates the FORTRAN subroutines used by the other two programs to identify the user commands with the user-written device drivers. The software system also includes an input data set which allows the user to define the user commands which are to be executed by the computer. To set the system up the operator writes device driver routines for all of the controlled devices. Once set up, this system requires only an input file containing natural language command lines which tell the system what to do and when to do it. The operator can make up custom commands for operating and taking data from external research equipment at any time of the day or night without the operator in attendance. This process control system requires a personal computer operating under MS-DOS with suitable hardware interfaces to all controlled devices. The program requires a FORTRAN77 compiler and user-written device drivers. This program was developed in 1989 and has a memory requirement of about 62 Kbytes.

  5. Reporducibilities of cephalometric measurements of three-dimensional CT images reconstructed in the personal computer

    Energy Technology Data Exchange (ETDEWEB)

    Jeon, Kug Jin; Park, Hyok; Lee, Hee Cheol; Kim, Kee Deog; Park, Chang Seo [Yonsei University College of Medicine, Seoul (Korea, Republic of)

    2003-09-15

    The purpose of this study was to report the reproducibility of intra-observer and inter-observer consistency of cephalometric measurements using three-dimensional (3D) computed tomography (CT), and the degree of difference of the cephalometric measurements. CT images of 16 adult patients with normal class I occlusion were sent to personal computer and reconstructed into 3D images using V-Works 3.5{sup TM} (Cybermed Inc., Seoul, Korea). With the internal program of V-Works 3.5{sup TM}, 12 landmarks on regular cephalograms were transformed into 21 analytic categories and measured by 2 observers and in addition, one of the observers repeated their measurements. Intra-observer difference was calculated using paired t-test, and inter-observer by two sample test. There were significant differences in the intra-observer measurements (p<0.05) in four of the categories which included ANS-Me, ANS-PNS, Cdl-GO (Lt), GoL-GoR, but with the exception of Cdl-Go (Lt), ZmL-ZmR, Zyo-Zyo, the average differences were within 2 mm of each other. The inter-observer observations also showed significant differences in the measurements of the ZmL-ZmR and Zyo-Zyo categories (p<0.05). With the exception of the Cdl-Me (Rt), ZmL-ZmR, Zyo-Zyo categories, the average differences between the two observers were within 2mm, but the ZmL-ZmR and Zyo-Zyo values differed greatly with values of 8.10 and 19.8 mm respectively. In general, 3D CT images showed greater accuracy and reproducibility, with the exception of suture areas such as Zm and Zyo, than regular cephalograms in orthodontic measurement, showing differences of less than 2 mm, therefore 3D CT images can be useful in cephalometric measurements and treatment planning.

  6. COMPUTING

    CERN Multimedia

    M. Kasemann

    Overview In autumn the main focus was to process and handle CRAFT data and to perform the Summer08 MC production. The operational aspects were well covered by regular Computing Shifts, experts on duty and Computing Run Coordination. At the Computing Resource Board (CRB) in October a model to account for service work at Tier 2s was approved. The computing resources for 2009 were reviewed for presentation at the C-RRB. The quarterly resource monitoring is continuing. Facilities/Infrastructure operations Operations during CRAFT data taking ran fine. This proved to be a very valuable experience for T0 workflows and operations. The transfers of custodial data to most T1s went smoothly. A first round of reprocessing started at the Tier-1 centers end of November; it will take about two weeks. The Computing Shifts procedure was tested full scale during this period and proved to be very efficient: 30 Computing Shifts Persons (CSP) and 10 Computing Resources Coordinators (CRC). The shift program for the shut down w...

  7. Human Perception, SBS Sympsoms and Performance of Office Work during Exposure to Air Polluted by Building Materials and Personal Computers

    DEFF Research Database (Denmark)

    Bako-Biro, Zsolt

    The present thesis deals with the impact of polluted air from building materials and personal computers on human perception, Sick Building Syndrome (SBS) symptoms and performance of office work. These effects have been studies in a series of experiments that are described in two different chapters...

  8. USER'S GUIDE TO THE PERSONAL COMPUTER VERSION OF THE BIOGENIC EMISSIONS INVENTORY SYSTEM (PC-BEIS2)

    Science.gov (United States)

    The document is a user's guide for an updated Personal Computer version of the Biogenic Emissions Inventory System (PC-BEIS2), allowing users to estimate hourly emissions of biogenic volatile organic compounds (BVOCs) and soil nitrogen oxide emissions for any county in the contig...

  9. STAPRE and SCAT2. Statistical pre-equilibrium and optical nuclear model code for Personal Computer IBM/AT

    International Nuclear Information System (INIS)

    Goulo, V.G.

    1988-01-01

    This document describes the content of the diskettes with nuclear data production codes SCAT2 and STAPRE and the example data set for implementing and testing of these codes for personal computers IBM/AT. They are available on two diskettes, free fo charge, upon request from the NEA Data Bank, Saclay, France. (author). 4 refs, 1 fig

  10. 48 CFR 52.223-16 - IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false IEEE 1680 Standard for the... CONTRACT CLAUSES Text of Provisions and Clauses 52.223-16 IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products. As prescribed in 23.706(b)(1), insert the following clause: IEEE...

  11. Evaluating Students' Programming Skill Behaviour and Personalizing Their Computer Learning Environment Using "The Hour of Code" Paradigm

    Science.gov (United States)

    Mallios, Nikolaos; Vassilakopoulos, Michael Gr.

    2015-01-01

    One of the most intriguing objectives when teaching computer science in mid-adolescence high school students is attracting and mainly maintaining their concentration within the limits of the class. A number of theories have been proposed and numerous methodologies have been applied, aiming to assist in the implementation of a personalized learning…

  12. 76 FR 15321 - SEDASYS Computer-Assisted Personalized Sedation System; Ethicon Endo-Surgery, Inc.'s, Petition...

    Science.gov (United States)

    2011-03-21

    ...] SEDASYS Computer-Assisted Personalized Sedation System; Ethicon Endo-Surgery, Inc.'s, Petition for Review... an advisory committee Ethicon Endo- Surgery Inc.'s (EES's), petition for review of the Agency's... Foreman, FDA, CDRH, to Ken Charak, Ethicon Endo-Surgery, Inc., containing the order denying approval of...

  13. Power cycle heat balance software for personal computer (PC)2TM

    International Nuclear Information System (INIS)

    Bockh, P. von; Rodriguez, H.

    1996-01-01

    This paper describes the PC-based power cycle balance of plant software (PC)trademark (Power Cycle on Personal Computer). It is designed to assist nuclear, fossil, and industrial power plants so that steam cycles can be simulated, analyzed and optimized. First, the cycle model is developed on the screen. The elements of the power cycle are taken from a tool box containing all components of a modern power cycle. The elements are connected by using a mouse. The next step is the input of the design values of the components or data taken from performance tests. This entire input sequence is guided by the program. Based on the input data, the physical behavior of each component is simulated according to established physical rules. Part load operation or other off-design conditions can be calculated. The program is designed for use by power plant engineers and power engineering firms to optimize new power cycles, perform problem-solving analyses, optimize component retrofit, and train power plant engineers and operators. It also can be used by universities to educate engineering students

  14. Toward a Computer Vision-based Wayfinding Aid for Blind Persons to Access Unfamiliar Indoor Environments.

    Science.gov (United States)

    Tian, Yingli; Yang, Xiaodong; Yi, Chucai; Arditi, Aries

    2013-04-01

    Independent travel is a well known challenge for blind and visually impaired persons. In this paper, we propose a proof-of-concept computer vision-based wayfinding aid for blind people to independently access unfamiliar indoor environments. In order to find different rooms (e.g. an office, a lab, or a bathroom) and other building amenities (e.g. an exit or an elevator), we incorporate object detection with text recognition. First we develop a robust and efficient algorithm to detect doors, elevators, and cabinets based on their general geometric shape, by combining edges and corners. The algorithm is general enough to handle large intra-class variations of objects with different appearances among different indoor environments, as well as small inter-class differences between different objects such as doors and door-like cabinets. Next, in order to distinguish intra-class objects (e.g. an office door from a bathroom door), we extract and recognize text information associated with the detected objects. For text recognition, we first extract text regions from signs with multiple colors and possibly complex backgrounds, and then apply character localization and topological analysis to filter out background interference. The extracted text is recognized using off-the-shelf optical character recognition (OCR) software products. The object type, orientation, location, and text information are presented to the blind traveler as speech.

  15. Image storage, cataloguing and retrieval using a personal computer database software application

    International Nuclear Information System (INIS)

    Lewis, G.; Howman-Giles, R.

    1999-01-01

    Full text: Interesting images and cases are collected and collated by most nuclear medicine practitioners throughout the world. Changing imaging technology has altered the way in which images may be presented and are reported, with less reliance on 'hard copy' for both reporting and archiving purposes. Digital image generation and storage is rapidly replacing film in both radiological and nuclear medicine practice. A personal computer database based interesting case filing system is described and demonstrated. The digital image storage format allows instant access to both case information (e.g. history and examination, scan report or teaching point) and the relevant images. The database design allows rapid selection of cases and images appropriate to a particular diagnosis, scan type, age or other search criteria. Correlative X-ray, CT, MRI and ultrasound images can also be stored and accessed. The application is in use at The New Children's Hospital as an aid to postgraduate medical education, with new cases being regularly added to the database

  16. Efficiency improvement opportunities for personal computer monitors. Implications for market transformation programs

    Energy Technology Data Exchange (ETDEWEB)

    Park, Won Young; Phadke, Amol; Shah, Nihar [Environmental Energy Technologies Division, Lawrence Berkeley National Laboratory, Berkeley, CA (United States)

    2013-08-15

    Displays account for a significant portion of electricity consumed in personal computer (PC) use, and global PC monitor shipments are expected to continue to increase. We assess the market trends in the energy efficiency of PC monitors that are likely to occur without any additional policy intervention and estimate that PC monitor efficiency will likely improve by over 40 % by 2015 with saving potential of 4.5 TWh per year in 2015, compared to today's technology. We discuss various energy-efficiency improvement options and evaluate the cost-effectiveness of three of them, at least one of which improves efficiency by at least 20 % cost effectively beyond the ongoing market trends. We assess the potential for further improving efficiency taking into account the recent development of universal serial bus-powered liquid crystal display monitors and find that the current technology available and deployed in them has the potential to deeply and cost effectively reduce energy consumption by as much as 50 %. We provide insights for policies and programs that can be used to accelerate the adoption of efficient technologies to further capture global energy saving potential from PC monitors which we estimate to be 9.2 TWh per year in 2015.

  17. Efficiency Improvement Opportunities for Personal Computer Monitors. Implications for Market Transformation Programs

    Energy Technology Data Exchange (ETDEWEB)

    Park, Won Young [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Phadke, Amol [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Shah, Nihar [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-06-29

    Displays account for a significant portion of electricity consumed in personal computer (PC) use, and global PC monitor shipments are expected to continue to increase. We assess the market trends in the energy efficiency of PC monitors that are likely to occur without any additional policy intervention and estimate that display efficiency will likely improve by over 40% by 2015 compared to today’s technology. We evaluate the cost effectiveness of a key technology which further improves efficiency beyond this level by at least 20% and find that its adoption is cost effective. We assess the potential for further improving efficiency taking into account the recent development of universal serial bus (USB) powered liquid crystal display (LCD) monitors and find that the current technology available and deployed in USB powered monitors has the potential to deeply reduce energy consumption by as much as 50%. We provide insights for policies and programs that can be used to accelerate the adoption of efficient technologies to capture global energy saving potential from PC monitors which we estimate to be 9.2 terawatt-hours [TWh] per year in 2015.

  18. [Reconstruction of long polynucleotide sequences from fragments using the Iskra-226 personal computer

    Science.gov (United States)

    Kostetskiĭ, P V; Dobrova, I E

    1988-04-01

    An algorithm for reconstructing long DNA sequences, i.e. arranging all overlapping gel readings in the contigs, and the corresponding BASIC programme for personal computer "Iskra-226" (USSR) are described. The contig construction begins with the search for all fragments overlapping the basic (longest) one follower by determination of coordinates of 5' ends of the overlapping fragments. Then the gel reading with minimal 5' end coordinate and the gel reading with maximal 3' end coordinate are selected and used as basic ones at the next assembly steps. The procedure is finished when no gel reading overlapping the basic one can be found. All gel readings entered the contig are ignored at the next steps of the assembly. Finally, one or several contigs consisted of DNA fragments are obtained. Effectiveness of the algorithm was tested on a model based on the multiple assembly of the nucleotide sequence, encoding the Na, K-ATPase alpha-subunit of pig kidney. The programme does not call for user's participation and can comprise contigs up to 10,000 nucleotides long.

  19. Power levels in office equipment: Measurements of new monitors and personal computers

    International Nuclear Information System (INIS)

    Roberson, Judy A.; Brown, Richard E.; Nordman, Bruce; Webber, Carrie A.; Homan, Gregory H.; Mahajan, Akshay; McWhinney, Marla; Koomey, Jonathan G.

    2002-01-01

    Electronic office equipment has proliferated rapidly over the last twenty years and is projected to continue growing in the future. Efforts to reduce the growth in office equipment energy use have focused on power management to reduce power consumption of electronic devices when not being used for their primary purpose. The EPA ENERGY STAR[registered trademark] program has been instrumental in gaining widespread support for power management in office equipment, and accurate information about the energy used by office equipment in all power levels is important to improving program design and evaluation. This paper presents the results of a field study conducted during 2001 to measure the power levels of new monitors and personal computers. We measured off, on, and low-power levels in about 60 units manufactured since July 2000. The paper summarizes power data collected, explores differences within the sample (e.g., between CRT and LCD monitors), and discusses some issues that arise in m etering office equipment. We also present conclusions to help improve the success of future power management programs.Our findings include a trend among monitor manufacturers to provide a single very low low-power level, and the need to standardize methods for measuring monitor on power, to more accurately estimate the annual energy consumption of office equipment, as well as actual and potential energy savings from power management

  20. SIMON. A computer program for reliability and statistical analysis using Monte Carlo simulation. Program description and manual

    International Nuclear Information System (INIS)

    Kongsoe, H.E.; Lauridsen, K.

    1993-09-01

    SIMON is a program for calculation of reliability and statistical analysis. The program is of the Monte Carlo type, and it is designed with high flexibility, and has a large potential for application to complex problems like reliability analyses of very large systems and of systems, where complex modelling or knowledge of special details are required. Examples of application of the program, including input and output, for reliability and statistical analysis are presented. (au) (3 tabs., 3 ills., 5 refs.)

  1. Computed tomographic angiography criteria in the diagnosis of brain death - comparison of sensitivity and interobserver reliability of different evaluation scales

    International Nuclear Information System (INIS)

    Sawicki, Marcin; Walecka, A.; Bohatyrewicz, R.; Solek-Pastuszka, J.; Safranow, K.; Walecki, J.; Rowinski, O.; Czajkowski, Z.; Guzinski, M.; Burzynska, M.; Wojczal, J.

    2014-01-01

    The standardized diagnostic criteria for computed tomographic angiography (CTA) in diagnosis of brain death (BD) are not yet established. The aim of the study was to compare the sensitivity and interobserver agreement of the three previously used scales of CTA for the diagnosis of BD. Eighty-two clinically brain-dead patients underwent CTA with a delay of 40 s after contrast injection. Catheter angiography was used as the reference standard. CTA results were assessed by two radiologists, and the diagnosis of BD was established according to 10-, 7-, and 4-point scales. Catheter angiography confirmed the diagnosis of BD in all cases. Opacification of certain cerebral vessels as indicator of BD was highly sensitive: cortical segments of the middle cerebral artery (96.3 %), the internal cerebral vein (98.8 %), and the great cerebral vein (98.8 %). Other vessels were less sensitive: the pericallosal artery (74.4 %), cortical segments of the posterior cerebral artery (79.3 %), and the basilar artery (82.9 %). The sensitivities of the 10-, 7-, and 4-point scales were 67.1, 74.4, and 96.3 %, respectively (p < 0.001). Percentage interobserver agreement in diagnosis of BD reached 93 % for the 10-point scale, 89 % for the 7-point scale, and 95 % for the 4-point scale (p = 0.37). In the application of CTA to the diagnosis of BD, reducing the assessment of vascular opacification scale from a 10- to a 4-point scale significantly increases the sensitivity and maintains high interobserver reliability. (orig.)

  2. Computed tomographic angiography criteria in the diagnosis of brain death - comparison of sensitivity and interobserver reliability of different evaluation scales

    Energy Technology Data Exchange (ETDEWEB)

    Sawicki, Marcin; Walecka, A. [Pomeranian Medical University, Department of Diagnostic Imaging and Interventional Radiology, Szczecin (Poland); Bohatyrewicz, R.; Solek-Pastuszka, J. [Pomeranian Medical University, Clinic of Anesthesiology and Intensive Care, Szczecin (Poland); Safranow, K. [Pomeranian Medical University, Department of Biochemistry and Medical Chemistry, Szczecin (Poland); Walecki, J. [The Centre of Postgraduate Medical Education, Warsaw (Poland); Rowinski, O. [Medical University of Warsaw, 2nd Department of Clinical Radiology, Warsaw (Poland); Czajkowski, Z. [Regional Joint Hospital, Szczecin (Poland); Guzinski, M. [Wroclaw Medical University, Department of General Radiology, Interventional Radiology and Neuroradiology, Wroclaw (Poland); Burzynska, M. [Wroclaw Medical University, Department of Anesthesiology and Intensive Therapy, Wroclaw (Poland); Wojczal, J. [Medical University of Lublin, Department of Neurology, Lublin (Poland)

    2014-08-15

    The standardized diagnostic criteria for computed tomographic angiography (CTA) in diagnosis of brain death (BD) are not yet established. The aim of the study was to compare the sensitivity and interobserver agreement of the three previously used scales of CTA for the diagnosis of BD. Eighty-two clinically brain-dead patients underwent CTA with a delay of 40 s after contrast injection. Catheter angiography was used as the reference standard. CTA results were assessed by two radiologists, and the diagnosis of BD was established according to 10-, 7-, and 4-point scales. Catheter angiography confirmed the diagnosis of BD in all cases. Opacification of certain cerebral vessels as indicator of BD was highly sensitive: cortical segments of the middle cerebral artery (96.3 %), the internal cerebral vein (98.8 %), and the great cerebral vein (98.8 %). Other vessels were less sensitive: the pericallosal artery (74.4 %), cortical segments of the posterior cerebral artery (79.3 %), and the basilar artery (82.9 %). The sensitivities of the 10-, 7-, and 4-point scales were 67.1, 74.4, and 96.3 %, respectively (p < 0.001). Percentage interobserver agreement in diagnosis of BD reached 93 % for the 10-point scale, 89 % for the 7-point scale, and 95 % for the 4-point scale (p = 0.37). In the application of CTA to the diagnosis of BD, reducing the assessment of vascular opacification scale from a 10- to a 4-point scale significantly increases the sensitivity and maintains high interobserver reliability. (orig.)

  3. Reliability of implant placement with stereolithographic surgical guides generated from computed tomography: clinical data from 94 implants.

    Science.gov (United States)

    Ersoy, Ahmet Ersan; Turkyilmaz, Ilser; Ozan, Oguz; McGlumphy, Edwin A

    2008-08-01

    Dental implant placement requires precise planning with regard to anatomic limitations and restorative goals. The aim of this study was to evaluate the match between the positions and axes of the planned and placed implants using stereolithographic (SLA) surgical guides. Ninety-four implants were placed using SLA surgical guides generated from computed tomography (CT) between 2005 and 2006. Radiographic templates were used for all subjects during CT imaging. After obtaining three-dimensional CT images, each implant was virtually placed on the CT images. SLA surgical guides, fabricated using an SLA machine with a laser beam to polymerize the liquid photo-polymerized resin, were used during implant placement. A new CT scan was taken for each subject following implant placement. Special software was used to fuse the images of the planned and placed implants, and the locations and axes were compared. Compared to the planned implants, the placed implants showed angular deviation of 4.9 degrees+/-2.36 degrees, whereas the mean linear deviation was 1.22+/-0.85 mm at the implant neck and 1.51+/-1 mm at the implant apex. Compared to the implant planning, the angular deviation and linear deviation at the neck and apex of the placed maxillary implants were 5.31 degrees+/-0.36 degrees, 1.04+/-0.56 mm, and 1.57+/-0.97 mm, respectively, whereas corresponding figures for placed mandibular implants were 4.44 degrees+/-0.31 degrees, 1.42+/-1.05 mm, and 1.44+/-1.03 mm, respectively. SLA surgical guides using CT data may be reliable in implant placement and make flapless implant placement possible.

  4. x-y-recording in transmission electron microscopy. A versatile and inexpensive interface to personal computers with application to stereology.

    Science.gov (United States)

    Rickmann, M; Siklós, L; Joó, F; Wolff, J R

    1990-09-01

    An interface for IBM XT/AT-compatible computers is described which has been designed to read the actual specimen stage position of electron microscopes. The complete system consists of (i) optical incremental encoders attached to the x- and y-stage drivers of the microscope, (ii) two keypads for operator input, (iii) an interface card fitted to the bus of the personal computer, (iv) a standard configuration IBM XT (or compatible) personal computer optionally equipped with a (v) HP Graphic Language controllable colour plotter. The small size of the encoders and their connection to the stage drivers by simple ribbed belts allows an easy adaptation of the system to most electron microscopes. Operation of the interface card itself is supported by any high-level language available for personal computers. By the modular concept of these languages, the system can be customized to various applications, and no computer expertise is needed for actual operation. The present configuration offers an inexpensive attachment, which covers a wide range of applications from a simple notebook to high-resolution (200-nm) mapping of tissue. Since section coordinates can be processed in real-time, stereological estimations can be derived directly "on microscope". This is exemplified by an application in which particle numbers were determined by the disector method.

  5. Personal Learning Network Clusters: A Comparison between Mathematics and Computer Science Students

    Science.gov (United States)

    Harding, Ansie; Engelbrecht, Johann

    2015-01-01

    "Personal learning environments" (PLEs) and "personal learning networks" (PLNs) are well-known concepts. A personal learning network "cluster" is a small group of people who regularly interact academically and whose PLNs have a non-empty intersection that includes all the other members. At university level PLN…

  6. Reliability and validity of the revised Gibson Test of Cognitive Skills, a computer-based test battery for assessing cognition across the lifespan

    Directory of Open Access Journals (Sweden)

    Moore AL

    2018-02-01

    Full Text Available Amy Lawson Moore, Terissa M Miller Gibson Institute of Cognitive Research, Colorado Springs, CO, USA Purpose: The purpose of the current study is to evaluate the validity and reliability of the revised Gibson Test of Cognitive Skills, a computer-based battery of tests measuring short-term memory, long-term memory, processing speed, logic and reasoning, visual processing, as well as auditory processing and word attack skills.Methods: This study included 2,737 participants aged 5–85 years. A series of studies was conducted to examine the validity and reliability using the test performance of the entire norming group and several subgroups. The evaluation of the technical properties of the test battery included content validation by subject matter experts, item analysis and coefficient alpha, test–retest reliability, split-half reliability, and analysis of concurrent validity with the Woodcock Johnson III Tests of Cognitive Abilities and Tests of Achievement.Results: Results indicated strong sources of evidence of validity and reliability for the test, including internal consistency reliability coefficients ranging from 0.87 to 0.98, test–retest reliability coefficients ranging from 0.69 to 0.91, split-half reliability coefficients ranging from 0.87 to 0.91, and concurrent validity coefficients ranging from 0.53 to 0.93.Conclusion: The Gibson Test of Cognitive Skills-2 is a reliable and valid tool for assessing cognition in the general population across the lifespan. Keywords: testing, cognitive skills, memory, processing speed, visual processing, auditory processing

  7. Reliability calculations

    International Nuclear Information System (INIS)

    Petersen, K.E.

    1986-03-01

    Risk and reliability analysis is increasingly being used in evaluations of plant safety and plant reliability. The analysis can be performed either during the design process or during the operation time, with the purpose to improve the safety or the reliability. Due to plant complexity and safety and availability requirements, sophisticated tools, which are flexible and efficient, are needed. Such tools have been developed in the last 20 years and they have to be continuously refined to meet the growing requirements. Two different areas of application were analysed. In structural reliability probabilistic approaches have been introduced in some cases for the calculation of the reliability of structures or components. A new computer program has been developed based upon numerical integration in several variables. In systems reliability Monte Carlo simulation programs are used especially in analysis of very complex systems. In order to increase the applicability of the programs variance reduction techniques can be applied to speed up the calculation process. Variance reduction techniques have been studied and procedures for implementation of importance sampling are suggested. (author)

  8. Reliability engineering

    International Nuclear Information System (INIS)

    Lee, Chi Woo; Kim, Sun Jin; Lee, Seung Woo; Jeong, Sang Yeong

    1993-08-01

    This book start what is reliability? such as origin of reliability problems, definition of reliability and reliability and use of reliability. It also deals with probability and calculation of reliability, reliability function and failure rate, probability distribution of reliability, assumption of MTBF, process of probability distribution, down time, maintainability and availability, break down maintenance and preventive maintenance design of reliability, design of reliability for prediction and statistics, reliability test, reliability data and design and management of reliability.

  9. Comparison of personal computer with CT workstation in the evaluation of 3-dimensional CT image of the skull

    International Nuclear Information System (INIS)

    Kang, Bok Hee; Kim, Kee Deog; Park, Chang Seo

    2001-01-01

    To evaluate the usefulness of the reconstructed 3-dimensional image on the personal computer in comparison with that of the CT workstation by quantitative comparison and analysis. The spiral CT data obtained from 27 persons were transferred from the CT workstation to a personal computer, and they were reconstructed as 3-dimensional image on the personal computer using V-works 2.0 TM . One observer obtained the 14 measurements on the reconstructed 3-dimensional image on both the CT workstation and the personal computer. Paired test was used to evaluate the intraobserver difference and the mean value of the each measurement on the CT workstation and the personal computer. Pearson correlation analysis and % imcongruence were also performed. I-Gn, N-Gn, N-A, N-Ns, B-A and G-Op did not show any statistically significant difference (p>0.05), B-O, B-N, Eu-Eu, Zy-Zy, Biw, D-D, Orbrd R, and L had statistically significant difference (p<0.05), but the mean values of the differences of all measurements were below 2 mm, except for D-D. The value of correlation coefficient γ was greater than 0.95 at I-Gn, N-Gn, N-A, N-Ns, B-A, B-N, G-Op, Eu-Eu, Zy-Zy, and Biw, and it was 0.75 at B-O, 0.78 at D-D, and 0.82 at both Orbrb R and L. The % incongruence was below 4% at I-Gn, N-Gn, N-A, N-Ns, B-A, B-N, G-Op, Eu-Eu, Zy-Zy, and Biw, and 7.18%, 10.78%, 4.97%, 5.89% at B-O, D-D, Orbrb R and L respectively. It can be considered that the utilization of the personal computer has great usefulness in reconstruction of the 3-dimensional image when it comes to the economics, accessibility and convenience, except for thin bones and the landmarks which and difficult to be located

  10. Reliability, Factor Structure, and Associations With Measures of Problem Relationship and Behavior of the Personality Inventory for DSM-5 in a Sample of Italian Community-Dwelling Adolescents.

    Science.gov (United States)

    Somma, Antonella; Borroni, Serena; Maffei, Cesare; Giarolli, Laura E; Markon, Kristian E; Krueger, Robert F; Fossati, Andrea

    2017-10-01

    In order to assess the reliability, factorial validity, and criterion validity of the Personality Inventory for DSM-5 (PID-5) among adolescents, 1,264 Italian high school students were administered the PID-5. Participants were also administered the Questionnaire on Relationships and Substance Use as a criterion measure. In the full sample, McDonald's ω values were adequate for the PID-5 scales (median ω = .85, SD = .06), except for Suspiciousness. However, all PID-5 scales showed average inter-item correlation values in the .20-.55 range. Exploratory structural equation modeling analyses provided moderate support for the a priori model of PID-5 trait scales. Ordinal logistic regression analyses showed that selected PID-5 trait scales predicted a significant, albeit moderate (Cox & Snell R 2 values ranged from .08 to .15, all ps < .001) amount of variance in Questionnaire on Relationships and Substance Use variables.

  11. Reliability of the American Medical Association guides' model for measuring spinal range of motion. Its implication for whole-person impairment rating.

    Science.gov (United States)

    Nitschke, J E; Nattrass, C L; Disler, P B; Chou, M J; Ooi, K T

    1999-02-01

    Repeated measures design for intra- and interrater reliability. To determine the intra- and interrater reliability of the lumbar spine range of motion measured with a dual inclinometer, and the thoracolumbar spine range of motion measured with a long-arm goniometer, as recommended in the American Medical Association Guides. The American Medical Association Guides (2nd and 4th editions) recommend using measurements of thoracolumbar and lumbar range of movement, respectively, to estimate the percentage of permanent impairment in patients with chronic low back pain. However, the reliability of this method of estimating impairment has not been determined. In all, 34 subjects participated in the study, 21 women with a mean age of 40.1 years (SD, +/- 11.1) and 13 men with a mean age of 47.7 years (SD, +/- 12.1). Measures of thoracolumbar flexion, extension, lateral flexion, and rotation were obtained with a long-arm goniometer. Lumbar flexion, extension, and lateral flexion were measured with a dual inclinometer. Measurements were taken by two examiners on one occasion and by one examiner on two occasions approximately 1 week apart. The results showed poor intra- and interrater reliability for all measurements taken with both instruments. Measurement error expressed in degrees showed that measurements taken by different raters exhibited systematic as well as random differences. As a result, subjects measured by two different examiners on the same day, with either instrument, could give impairment ratings ranging between 0% and 18% of the whole person (excluding rotation), in which percentage impairment is calculated using the average range of motion and the average systematic and random error in degrees for the group for each movement (flexion, extension, and lateral flexion). The poor reliability of the American Medical Association Guides' spinal range of motion model can result in marked variation in the percentage of whole-body impairment. These findings have

  12. Reliability and Construct Validity of the Psychopathic Personality Inventory-Revised in a Swedish Non-Criminal Sample - A Multimethod Approach including Psychophysiological Correlates of Empathy for Pain.

    Directory of Open Access Journals (Sweden)

    Karolina Sörman

    Full Text Available Cross-cultural investigation of psychopathy measures is important for clarifying the nomological network surrounding the psychopathy construct. The Psychopathic Personality Inventory-Revised (PPI-R is one of the most extensively researched self-report measures of psychopathic traits in adults. To date however, it has been examined primarily in North American criminal or student samples. To address this gap in the literature, we examined PPI-R's reliability, construct validity and factor structure in non-criminal individuals (N = 227 in Sweden, using a multimethod approach including psychophysiological correlates of empathy for pain. PPI-R construct validity was investigated in subgroups of participants by exploring its degree of overlap with (i the Psychopathy Checklist: Screening Version (PCL:SV, (ii self-rated empathy and behavioral and physiological responses in an experiment on empathy for pain, and (iii additional self-report measures of alexithymia and trait anxiety. The PPI-R total score was significantly associated with PCL:SV total and factor scores. The PPI-R Coldheartedness scale demonstrated significant negative associations with all empathy subscales and with rated unpleasantness and skin conductance responses in the empathy experiment. The PPI-R higher order Self-Centered Impulsivity and Fearless Dominance dimensions were associated with trait anxiety in opposite directions (positively and negatively, respectively. Overall, the results demonstrated solid reliability (test-retest and internal consistency and promising but somewhat mixed construct validity for the Swedish translation of the PPI-R.

  13. Using standardized video cases for assessment of medical communication skills: reliability of an objective structured video examination by computer

    NARCIS (Netherlands)

    Hulsman, R. L.; Mollema, E. D.; Oort, F. J.; Hoos, A. M.; de Haes, J. C. J. M.

    2006-01-01

    OBJECTIVE: Using standardized video cases in a computerized objective structured video examination (OSVE) aims to measure cognitive scripts underlying overt communication behavior by questions on knowledge, understanding and performance. In this study the reliability of the OSVE assessment is

  14. [Clinical characteristics of computer game and internet addiction in persons seeking treatment in an outpatient clinic for computer game addiction].

    Science.gov (United States)

    Beutel, Manfred E; Hoch, Christina; Wölfling, Klaus; Müller, Kai W

    2011-01-01

    Since March 2008 we have offered outpatient treatment for computer game and internet addiction. This article presents the assessment and clinical characterization of the first cohort of one year. The reasons for seeking help (phone consultations, N=346) as well as sociodemographic and psychometric characteristics (N=131) (assessment of computer game addiction; SCL-90R) are presented. Consultation was initiated mainly by relatives--mostly the mothers (86%); 48% report achievement failure and social isolation, lack of control (38%) and conflicts within the family (33%). Two-thirds of the mainly male (96%) patients (N=131) with an average age of 22 (range 13-47) years met the criteria for pathological computer gaming, characterized by an excessive number of hours and preoccupation with gaming, high distress, and unemployment. Symptoms resemble those of other addiction disorders. The consequences for disorder-specific treatment concepts and research are discussed.

  15. COMPUTING

    CERN Multimedia

    M. Kasemann

    Introduction A large fraction of the effort was focused during the last period into the preparation and monitoring of the February tests of Common VO Computing Readiness Challenge 08. CCRC08 is being run by the WLCG collaboration in two phases, between the centres and all experiments. The February test is dedicated to functionality tests, while the May challenge will consist of running at all centres and with full workflows. For this first period, a number of functionality checks of the computing power, data repositories and archives as well as network links are planned. This will help assess the reliability of the systems under a variety of loads, and identifying possible bottlenecks. Many tests are scheduled together with other VOs, allowing the full scale stress test. The data rates (writing, accessing and transfer¬ring) are being checked under a variety of loads and operating conditions, as well as the reliability and transfer rates of the links between Tier-0 and Tier-1s. In addition, the capa...

  16. Intelligent Adaptation and Personalization Techniques in Computer-Supported Collaborative Learning

    CERN Document Server

    Demetriadis, Stavros; Xhafa, Fatos

    2012-01-01

    Adaptation and personalization have been extensively studied in CSCL research community aiming to design intelligent systems that adaptively support eLearning processes and collaboration. Yet, with the fast development in Internet technologies, especially with the emergence of new data technologies and the mobile technologies, new opportunities and perspectives are opened for advanced adaptive and personalized systems. Adaptation and personalization are posing new research and development challenges to nowadays CSCL systems. In particular, adaptation should be focused in a multi-dimensional way (cognitive, technological, context-aware and personal). Moreover, it should address the particularities of both individual learners and group collaboration. As a consequence, the aim of this book is twofold. On the one hand, it discusses the latest advances and findings in the area of intelligent adaptive and personalized learning systems. On the other hand it analyzes the new implementation perspectives for intelligen...

  17. Feedback control of plasma equilibrium with control system aided by personal computer on the JIPP T-IIU tokamak

    International Nuclear Information System (INIS)

    Tsuzuki, T.; Toi, K.; Matsuura, K.

    1991-04-01

    A feedback control system aided by a personal computer is developed to maintain plasma position on the required position in the JIPP T-IIU tokamak. The personal computer enables to adjust various control parameters easily. In this control system, a control demand for driving the power supply of feedback controlled vertical field coils is composed to be proportional to a total plasma current. This system has been successfully employed throughout the discharge where the plasma current substantially changes from zero to hundreds of kiloamperes, because the feedback control can be done, being independent of the plasma current. The analysis of this feedback control system taken into account of digital sampling agrees well with the experimental results. (author)

  18. Computer modeling with randomized-controlled trial data informs the development of person-centered aged care homes.

    Science.gov (United States)

    Chenoweth, Lynn; Vickland, Victor; Stein-Parbury, Jane; Jeon, Yun-Hee; Kenny, Patricia; Brodaty, Henry

    2015-10-01

    To answer questions on the essential components (services, operations and resources) of a person-centered aged care home (iHome) using computer simulation. iHome was developed with AnyLogic software using extant study data obtained from 60 Australian aged care homes, 900+ clients and 700+ aged care staff. Bayesian analysis of simulated trial data will determine the influence of different iHome characteristics on care service quality and client outcomes. Interim results: A person-centered aged care home (socio-cultural context) and care/lifestyle services (interactional environment) can produce positive outcomes for aged care clients (subjective experiences) in the simulated environment. Further testing will define essential characteristics of a person-centered care home.

  19. Is remanufacturing effective and eco-efficient?: An analysis of the eco-efficiency of personal computers and mobile phones

    OpenAIRE

    Quariguasi Frota Neto, João; Bloemhof-Ruwaard, Jacqueline

    2009-01-01

    textabstractRemanufacturing has long been perceived as an environmentally-friendly initiative, and it is therefore sup- ported by a number of governments, in particular in Europe. Yet, the assumption that remanufacturing is desirable to society has never been systematically investigated. In this paper, we focus our attention on the electronics industry. In particular, we take a close look at remanufacturing within the personal computer and mobile phone industries. We investigate whether reman...

  20. Revision of the European Ecolabel Criteria for Personal, Notebook and Tablet Computers TECHNICAL REPORT Summary of the final criteria proposals

    OpenAIRE

    DODD NICHOLAS; VIDAL ABARCA GARRIDO CANDELA; WOLF Oliver; GRAULICH Kathrin; BUNKE Dirk; GROSS Rita; LIU Ran; MANHART Andreas; PRAKASH Siddharth

    2015-01-01

    This technical report provide the background information for the revision of the EU Ecolabel criteria for Personal and Notebook Computers. The study has been carried out by the Joint Research Centre with technical support from the Oeko-Institut. The work has been developed for the European Commission's Directorate General for the Environment. The main purpose of this report is to provide a summary of the technical background and rationale for each criterion proposal. This document is compl...