Update and improvement of the global krypton-85 emission inventory

International Nuclear Information System (INIS)

Ahlswede, Jochen; Hebel, Simon; Ross, J. Ole; Schoetter, Robert; Kalinowski, Martin B.

2013-01-01

Krypton-85 is mainly produced in nuclear reactors by fission of uranium and plutonium and released during chopping and dissolution of spent fuel rods in nuclear reprocessing facilities. As noble gas it is suited as a passive tracer for evaluation of atmospheric transport models. Furthermore, research is ongoing to assess its quality as an indicator for clandestine reprocessing activities. This paper continues previous efforts to compile a comprehensive historic emission inventory for krypton-85. Reprocessing facilities are the by far largest emitters of krypton-85. Information on sources and calculations used to derive the annual krypton-85 emission is provided for all known reprocessing facilities in the world. In addition, the emission characteristics of two plants, Tokai (Japan) and La Hague (France), are analysed in detail using emission data with high temporal resolution. Other types of krypton-85 sources are power reactors, naval reactors and isotope production facilities. These sources contribute only little or negligible amounts of krypton-85 compared to the large reprocessing facilities. Taking the decay of krypton-85 into account, the global atmospheric inventory is estimated to about 5500 PBq at the end of 2009. The correctness if the inventory has been proven by meteorological simulations and its error is assumed to be in the range of a few percent. - Highlights: ► Krypton-85 is mainly produced in nuclear reactors and released during reprocessing. ► Krypten-85 can be possibly used as an indicator for clandestine reprocessing. ► This work provides an up-to-date global krypton-85 emission inventory. ► The inventory includes emissions from all possible artificial sources.

Inventory and update on argasid ticks and associated pathogens in Algeria.

Science.gov (United States)

Lafri, I; Benredjem, W; Neffah-Baaziz, F; Lalout, R; Abdelouahed, K; Gassen, B; Bakhouch, S; Chergui, M; Karakellah, M; Adjmi-Hamoudi, H; Bitam, I

2018-05-01

Argasid ticks include vectors of relapsing fevers caused by Borrelia spp. in humans, and they can transmit arboviruses and other bacterial pathogens. Knowledge about soft ticks ( Ixodida: Argasidae ) in Algeria is incomplete, and distribution data need to be updated. Here we report a series of entomologic investigations that we conducted in five different areas in Algeria between 2012 and 2015. Ticks were identified by entomologic keys and molecular tools (16S rRNA gene). Six distinct species belonging to two genera were identified, including Ornithodoros capensis s.s., Ornithodoros rupestris, Ornithodoros occidentalis, Ornithodoros erraticus, Ornithodoros sonrai and Argas persicus. The present study highlights the distribution of soft ticks, the establishment of an update inventory with nine species and associated pathogens detected in argasid ticks in Algeria.

78 FR 52860 - Electronic Reporting of Toxics Release Inventory Data

Science.gov (United States)

2013-08-27

... only exception to this electronic reporting requirement is for the few facilities that submit trade... rulemaking process later to require the electronic reporting of trade secrets. The EPA recognizes the... Electronic Reporting of Toxics Release Inventory Data AGENCY: Environmental Protection Agency (EPA). ACTION...

Inventory and update on argasid ticks and associated pathogens in Algeria

Directory of Open Access Journals (Sweden)

I. Lafri

2018-05-01

Full Text Available Argasid ticks include vectors of relapsing fevers caused by Borrelia spp. in humans, and they can transmit arboviruses and other bacterial pathogens. Knowledge about soft ticks (Ixodida: Argasidae in Algeria is incomplete, and distribution data need to be updated. Here we report a series of entomologic investigations that we conducted in five different areas in Algeria between 2012 and 2015. Ticks were identified by entomologic keys and molecular tools (16S rRNA gene. Six distinct species belonging to two genera were identified, including Ornithodoros capensis s.s., Ornithodoros rupestris, Ornithodoros occidentalis, Ornithodoros erraticus, Ornithodoros sonrai and Argas persicus. The present study highlights the distribution of soft ticks, the establishment of an update inventory with nine species and associated pathogens detected in argasid ticks in Algeria. Keywords: Argasid, Borrelia, Ornithodoros, Rickettsia

Updating the New Zealand Glacier Inventory

Science.gov (United States)

Baumann, S. C.; Anderson, B.; Mackintosh, A.; Lorrey, A.; Chinn, T.; Collier, C.; Rack, W.; Purdie, H.

2017-12-01

The last complete glacier inventory of New Zealand dates from the year 1978 (North Island 1988) and was manually constructed from oblique aerial photographs and geodetic maps (Chinn 2001). The inventory has been partly updated by Gjermundsen et al. (2011) for the year 2002 (40% of total area) and by Sirguey & More (2010) for the year 2009 (32% of total area), both using ASTER satellite imagery. We used Landsat 8 OLI/TIRS satellite data from February/March 2016 to map the total glaciated area. Clean and debris-covered ice were mapped semi-automatically. The band ratio approach was used for clean ice (ratio: red/SWIR). We mapped debris-covered ice using a supervised classification (maximum likelihood). Manual post processing was necessary due to misclassifications (e.g. lakes, clouds) or mapping in shadowed areas. It was also necessary to manually combine the clean and debris-covered parts into single glaciers. Additional input data for the post processing were Sentinel 2 images from the same time period, orthophotos from Land Information New Zealand (resolution: 0.75 m, date: Nov 2014), and the 1978/88 outlines from the GLIMS database (http://www.glims.org/). As the Sentinel 2 data were more heavily cloud covered compared to the Landsat 8 images, they were only used for post processing and not for the classification itself. Initial results show that New Zealand glaciers covered an area of about 1050 km² in 2016, a reduction of 16% since 1978. Approximately 17% of glacier area was covered in surface debris. The glaciers in the central Southern Alps around Mt Cook reduced in area by 24%. Glaciers in the North Island of New Zealand reduced by 71% since 1988, and only 2 km² of ice cover remained in 2016. Chinn, TJH (2001). "Distribution of the glacial water resources of New Zealand." Journal of Hydrology (NZ) 40(2): 139-187 Gjermundsen, EF, Mathieu, R, Kääb, A, Chinn, TJH, Fitzharris, B & Hagen, JO (2011). "Assessment of multispectral glacier mapping methods and

Normalization in EDIP97 and EDIP2003: updated European inventory for 2004 and guidance towards a consistent use in practice

DEFF Research Database (Denmark)

Laurent, Alexis; Olsen, Stig Irving; Hauschild, Michael Zwicky

2011-01-01

Purpose: When performing a life cycle assessment (LCA), the LCA practitioner faces the need to express the characterized results in a form suitable for the final interpretation. This can be done using normalization against some common reference impact—the normalization references—which require...... regular updates. The study presents updated sets of normalization inventories, normalization references for the EDIP97/EDIP2003 methodology and guidance on their consistent use in practice. Materials and methods: The base year of the inventory is 2004; the geographical scope for the non-global impacts...... is limited to Europe. The emission inventory was collected from different publicly available databases and monitoring bodies. Where necessary, gaps were filled using extrapolations. A new approach for inventorizing specific groups of substances—non-methane volatile organic compounds and pesticides—was also...

The inventory of sources, environmental releases and risk assessment for perfluorooctane sulfonate in China

International Nuclear Information System (INIS)

Zhang Lai; Liu Jianguo; Hu Jianxin; Liu Chao; Guo Weiguang; Wang Qiang; Wang Hong

2012-01-01

With about 100 t/y of the production volume, perfluorootane sulfonates (PFOS) are mainly used for metal plating, aqueous fire-fighting foams (AFFFs) and sulfluramidin China, and the use amount is about 30–40 t/y, 25–35 t/y and 4–8 t/y respectively. Based on the inventory of PFOS production and uses with geographic distribution educed from statistics, environmental risk assessment of PFOS was taken by using EUSES model, as well as its environmental releases were estimated both in local and regional levels in China. While the environmental release from manufacture is significant in Central China region, metal plating was identified as the major PFOS release source in regional level. The East China region shows the most strong emission strength of PFOS. Though the predicted environmental concentrations (PECs) were not exceed current relevant predicted no effect concentrations (PNECs) of the risk characterization for PFOS, higher PECs was estimated around major PFOS release sources showing undesirable environmental risk at local level. - Highlights: ► Inventory of production and uses of perfluorooctane sulfonate (PFOS) in China with geographical distribution. ► Characteristics of PFOS release sources and distribution consistent with social-economic situation in China. ► Effective model predicted results of PFOS environmental risk assessment in local and regional scales compared with relevant environmental monitoring data. - Inventory of PFOS production and use of with sectoral and regional distribution of China, environmental releases and risk status were indicated both in the local and regional level of the country.

2001 Toxic Chemical Release Inventory Emergency Planning and Community Right to Know Act SEC 313

International Nuclear Information System (INIS)

ZALOUDEK, D.E.

2002-01-01

Pursuant to section 313 of the Emergency Planning and Community Right-To-Know Act of 1986 (EPCRA), and Executive Order 13148, Greening the Government Through Leadership in Environmental Management, the US Department of Energy has prepared and submitted a Toxic Chemical Release Inventory for the Hanford Site covering activities performed during calendar year 2001. EPCRA Section 313 requires facilities that manufacture, process, or otherwise use listed toxic chemicals in quantities exceeding established threshold levels to report total annual releases of those chemicals. During calendar year 2001, Hanford Site activities resulted in one chemical used in amounts exceeding an activity threshold. Accordingly, the Hanford Site 2001 Toxic Chemical Release Inventory, DOE/RL-2002-37, includes total annual amount of lead released to the environment, transferred to offsite locations, and otherwise managed as waste

An updated emission inventory of vehicular VOCs and IVOCs in China

Science.gov (United States)

Liu, Huan; Man, Hanyang; Cui, Hongyang; Wang, Yanjun; Deng, Fanyuan; Wang, Yue; Yang, Xiaofan; Xiao, Qian; Zhang, Qiang; Ding, Yan; He, Kebin

2017-10-01

Currently, the emission inventory of vehicular volatile organic compounds (VOCs) is one of those with the largest errors and uncertainties due to suboptimal estimation methods and the lack of first-hand basic data. In this study, an updated speciated emission inventory of VOCs and an estimation of intermediate-volatility organic compounds (IVOCs) from vehicles in China at the provincial level for the year of 2015 are developed based on a set of state-of-the-art methods and an abundance of local measurement data. Activity data for light-duty vehicles are derived from trajectories of more than 70 000 cars for 1 year. The annual mileage of trucks are calculated from reported data by more than 2 million trucks in China. The emission profiles are updated using measurement data. Vehicular tailpipe emissions (VTEs) and four types of vehicular evaporation emissions (VEEs), including refueling, hot soak, diurnal and running loss, are taken into account. Results show that the total vehicular VOC emissions in China are 4.21 Tg (with a 95 % confidence interval range from 2.90 to 6.54 Tg) and the IVOC emissions are 200.37 Gg in 2015. VTEs are still the predominant contributor, while VEEs are responsible for 39.20 % of VOC emissions. The control of VEEs is yet to be optimized in China. Among VTEs, passenger vehicles emissions have the largest share (49.86 %), followed by trucks (28.15 %) and motorcycles (21.99 %). Among VEEs, running loss is the largest contributor (81.05 %). For both VTEs and VEEs, Guangdong, Shandong and Jiangsu province are three of the highest, with a respective contribution of 10.66, 8.85 and 6.54 % to the total amounts of VOCs from vehicles. 97 VOC species are analyzed in this VOC emission inventory. i-Pentane, toluene and formaldehyde are found to be the most abundant species in China's vehicular VOC emissions. The estimated IVOCs are another inconvenient truth, concluding that precursor emissions for secondary organic aerosol (SOA) from vehicles are much

Center for Integrated Nanotechnologies (CINT) Chemical Release Modeling Evaluation

Energy Technology Data Exchange (ETDEWEB)

Stirrup, Timothy Scott [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2016-12-20

This evaluation documents the methodology and results of chemical release modeling for operations at Building 518, Center for Integrated Nanotechnologies (CINT) Core Facility. This evaluation is intended to supplement an update to the CINT [Standalone] Hazards Analysis (SHA). This evaluation also updates the original [Design] Hazards Analysis (DHA) completed in 2003 during the design and construction of the facility; since the original DHA, additional toxic materials have been evaluated and modeled to confirm the continued low hazard classification of the CINT facility and operations. This evaluation addresses the potential catastrophic release of the current inventory of toxic chemicals at Building 518 based on a standard query in the Chemical Information System (CIS).

2015 TRI National Analysis: Toxics Release Inventory Releases at Various Summary Levels

Science.gov (United States)

The TRI National Analysis is EPA's annual interpretation of TRI data at various summary levels. It highlights how toxic chemical wastes were managed, where toxic chemicals were released and how the 2015 TRI data compare to data from previous years. This dataset reports US state, county, large aquatic ecosystem, metro/micropolitan statistical area, and facility level statistics from 2015 TRI releases, including information on: number of 2015 TRI facilities in the geographic area and their releases (total, water, air, land); population information, including populations living within 1 mile of TRI facilities (total, minority, in poverty); and Risk Screening Environmental Indicators (RSEI) model related pounds, toxicity-weighted pounds, and RSEI score. The source of administrative boundary data is the 2013 cartographic boundary shapefiles. Location of facilities is provided by EPA's Facility Registry Service (FRS). Large Aquatic Ecosystems boundaries were dissolved from the hydrologic unit boundaries and codes for the United States, Puerto Rico, and the U.S. Virgin Islands. It was revised for inclusion in the National Atlas of the United States of America (November 2002), and updated to match the streams file created by the USGS National Mapping Division (NMD) for the National Atlas of the United States of America.

An updated emission inventory of vehicular VOCs and IVOCs in China

Directory of Open Access Journals (Sweden)

H. Liu

2017-10-01

Full Text Available Currently, the emission inventory of vehicular volatile organic compounds (VOCs is one of those with the largest errors and uncertainties due to suboptimal estimation methods and the lack of first-hand basic data. In this study, an updated speciated emission inventory of VOCs and an estimation of intermediate-volatility organic compounds (IVOCs from vehicles in China at the provincial level for the year of 2015 are developed based on a set of state-of-the-art methods and an abundance of local measurement data. Activity data for light-duty vehicles are derived from trajectories of more than 70 000 cars for 1 year. The annual mileage of trucks are calculated from reported data by more than 2 million trucks in China. The emission profiles are updated using measurement data. Vehicular tailpipe emissions (VTEs and four types of vehicular evaporation emissions (VEEs, including refueling, hot soak, diurnal and running loss, are taken into account. Results show that the total vehicular VOC emissions in China are 4.21 Tg (with a 95 % confidence interval range from 2.90 to 6.54 Tg and the IVOC emissions are 200.37 Gg in 2015. VTEs are still the predominant contributor, while VEEs are responsible for 39.20 % of VOC emissions. The control of VEEs is yet to be optimized in China. Among VTEs, passenger vehicles emissions have the largest share (49.86 %, followed by trucks (28.15 % and motorcycles (21.99 %. Among VEEs, running loss is the largest contributor (81.05 %. For both VTEs and VEEs, Guangdong, Shandong and Jiangsu province are three of the highest, with a respective contribution of 10.66, 8.85 and 6.54 % to the total amounts of VOCs from vehicles. 97 VOC species are analyzed in this VOC emission inventory. i-Pentane, toluene and formaldehyde are found to be the most abundant species in China's vehicular VOC emissions. The estimated IVOCs are another inconvenient truth, concluding that precursor emissions for secondary organic

An assessment of the tritium inventory in, permeation through and releases from the NET plasma facing materials

International Nuclear Information System (INIS)

Wu, C.H.

1986-01-01

The tritium retention, permeation and release characteristics of D-T tokamaks are extremely important from both an environmental and a plasma physics point of view. Tokamak measurements have demonstrated that release of retained hydrogen isotopes by plasma-wall interactions play a dominant role in fuel recycling during a discharge. In addition, retained tritium in the plasma facing materials may contribute substantially to the on-site tritium inventory of D-T devices. Austenitic and martensitic steels are being considered as first wall materials. Tungsten and molybdenum will be possibly used as divertor armour materials for NET. By using a computer code, the tritium inventory in, permeation through and release from these materials have been calculated as functions of material thickness, temperature and impinging fluxes. It is shown that the tritium inventory in the first wall will be strongly affected by the temperature gradient in the materials. It is evident, that the tritium permeation as well as the tritium inventory can be reduced appropriately by controlling the temperatures at the plasma and cooling sides of the first wall. The results are discussed and the possible consequences are analysed. (author)

2008 Toxic Chemical Release Inventory 2008 Toxic Chemical Release Inventory Community Right-to-Know Act of 1986, Title III, Section 313

Energy Technology Data Exchange (ETDEWEB)

Ecology and Air Quality Group

2009-10-01

For reporting year 2008, Los Alamos National Laboratory (LANL) submitted a Form R report for lead as required under the Emergency Planning and Community Right-to- Know Act (EPCRA) Section 313. No other EPCRA Section 313 chemicals were used in 2008 above the reportable thresholds. This document was prepared to provide a description of the evaluation of EPCRA Section 313 chemical use and threshold determinations for LANL for calendar year 2008, as well as to provide background information about data included on the Form R reports. Section 313 of EPCRA specifically requires facilities to submit a Toxic Chemical Release Inventory Report (Form R) to the U.S. Environmental Protection Agency (EPA) and state agencies if the owners and operators manufacture, process, or otherwise use any of the listed toxic chemicals above listed threshold quantities. EPA compiles this data in the Toxic Release Inventory database. Form R reports for each chemical over threshold quantities must be submitted on or before July 1 each year and must cover activities that occurred at the facility during the previous year. In 1999, EPA promulgated a final rule on persistent bioaccumulative toxics (PBTs). This rule added several chemicals to the EPCRA Section 313 list of toxic chemicals and established lower reporting thresholds for these and other PBT chemicals that were already reportable. These lower thresholds became applicable in reporting year 2000. In 2001, EPA expanded the PBT rule to include a lower reporting threshold for lead and lead compounds. Facilities that manufacture, process, or otherwise use more than 100 lb of lead or lead compounds must submit a Form R.

IDSA releases updated coccidioidomycosis guidelines

Directory of Open Access Journals (Sweden)

Robbins RA

2016-09-01

Full Text Available No abstract available. Article truncated at 150 words. The Infectious Diseases Society of America (IDSA has released updated Guidelines for the Treatment of Coccidioidomycosis, also known as cocci or Valley Fever (1. Coccidioidomycosis is a fungal infection endemic to the southwestern United States and a common cause of pneumonia and pulmonary nodules in this area. However, the infection can disseminate systemically especially in immunocompromised hosts and certain ethnic populations resulting in a variety of pulmonary and extrapulmonary complications. In addition to recommendations for these complications, the new guidelines address management of special at-risk populations, preemptive management strategies in at-risk populations and after unintentional laboratory exposure. The guidelines also suggest shorter courses of antibiotics for hospitalized patients and more ambulatory treatment for most individuals who have contracted Valley Fever. The panel was led by John N. Galgiani, MD, director of the Valley Fever Center for Excellence at the University of Arizona Health Sciences. Galgiani led a panel of 16 ...

Update and improvement of the global krypton-85 emission inventory.

Science.gov (United States)

Ahlswede, Jochen; Hebel, Simon; Ross, J Ole; Schoetter, Robert; Kalinowski, Martin B

2013-01-01

Krypton-85 is mainly produced in nuclear reactors by fission of uranium and plutonium and released during chopping and dissolution of spent fuel rods in nuclear reprocessing facilities. As noble gas it is suited as a passive tracer for evaluation of atmospheric transport models. Furthermore, research is ongoing to assess its quality as an indicator for clandestine reprocessing activities. This paper continues previous efforts to compile a comprehensive historic emission inventory for krypton-85. Reprocessing facilities are the by far largest emitters of krypton-85. Information on sources and calculations used to derive the annual krypton-85 emission is provided for all known reprocessing facilities in the world. In addition, the emission characteristics of two plants, Tokai (Japan) and La Hague (France), are analysed in detail using emission data with high temporal resolution. Other types of krypton-85 sources are power reactors, naval reactors and isotope production facilities. These sources contribute only little or negligible amounts of krypton-85 compared to the large reprocessing facilities. Taking the decay of krypton-85 into account, the global atmospheric inventory is estimated to about 5500 PBq at the end of 2009. The correctness if the inventory has been proven by meteorological simulations and its error is assumed to be in the range of a few percent. Copyright © 2012 Elsevier Ltd. All rights reserved.

Calculation of tritium inventory and permeation in an INTOR like tokamak device and of its release after shut down

International Nuclear Information System (INIS)

Wienhold, P.; Waelbroeck, F.s; Winter, J.; Ali-Khan, I.

1980-12-01

The tritium inventory in the wall, its escape via permeation and its release in general are evaluated during the operation and later shut-down phases of a tokamak like INTOR by means of the PERI code. No real tritium problem arises after shut-down: simple outgasing techniques at wall temperatures Tsub(W) of approx. 500 0 C should decrease the tritium release rate down to a sufficient low level. Very serious problems are on the other hand expected to arise in the areas of inventory and permeation of tritium during the operation phase: one has the choice between e.g. operating at Tsub(W) = 350 0 C with a quasi-stationary tritium inventory of some 100 grams and a permeation flux phisub(p) approx. 1 gram/day or increasing Tsub(W) to 500 0 C, reducing the inventory down to some grams, but have then a leakage rate by permeation of 35 grams/day. For Tsub(W) = 100 0 C the tritium release into the torus will be intolerable. These figures are confirmed by preliminary measurements on Inconel 600. A suggestion is made as to how to alleviate the problem. (orig.) [de

Bernese motive and goal inventory in exercise and sport: Validation of an updated version of the questionnaire.

Science.gov (United States)

Schmid, Julia; Gut, Vanessa; Conzelmann, Achim; Sudeck, Gorden

2018-01-01

Target group-specific intervention strategies are often called for in order to effectively promote exercise and sport. Currently, motives and goals are rarely included systematically in the design of interventions, despite the key role they play in well-being and adherence to exercise. The Bernese motive and goal inventory (BMZI) allows an individual diagnosis of motives and goals in exercise and sport in people in middle adulthood. The purpose of the present study was to elaborate on the original BMZI and to modify the questionnaire in order to improve its psychometric properties. The study is based on data from two samples (sample A: 448 employees of companies and authorities; sample B: 853 patients of a medical rehabilitation programme). We applied confirmatory factor analysis and exploratory structural equation modelling. Overall, both the original and the updated BMZI had an acceptable to good validity and a good reliability. However, the revised questionnaire had slightly better reliability. The updated BMZI consists of 23 items and covers the following motives and goals: Body/Appearance, Contact, Competition/Performance, Aesthetics, Distraction/Catharsis, Fitness and Health. It is recommended as an economical inventory for the individual diagnosis of important psychological conditions for exercise and sport.

Inventory and Waste Characterization Status Report

Energy Technology Data Exchange (ETDEWEB)

Sassani, David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Price, Laura L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rechard, Robert P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rogers, Ralph [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Walkow, Walter M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Johnson, Ava [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sanchez, Amanda Christine [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mariner, Paul [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rigali, Mark J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Stein, Emily [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Weck, Philippe F [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-09-20

This report provides an update to Sassani et al. (2016) and includes: (1) an updated set of inputs (Sections 2.3) on various additional waste forms (WF) covering both DOE-managed spent nuclear fuel (SNF) and DOE-managed (as) high-level waste (HLW) for use in the inventory represented in the geologic disposal safety analyses (GDSA); (2) summaries of evaluations initiated to refine specific characteristics of particular WF for future use (Section 2.4); (3) updated development status of the Online Waste Library (OWL) database (Section 3.1.2) and an updated user guide to OWL (Section 3.1.3); and (4) status updates (Section 3.2) for the OWL inventory content, data entry checking process, and external OWL BETA testing initiated in fiscal year 2017.

U.S./Mexico Border environmental study toxics release inventory data, 1988--1992

Energy Technology Data Exchange (ETDEWEB)

O`Brien, R.F.; LoPresti, C.A.

1996-02-01

This is a report on industrial toxic chemical releases and transfers based on information reported to the Toxics Release Inventory (TRI), a database maintained by the USEPA. This document discusses patterns of toxic chemical releases to the atmosphere, to water, to the land, and to underground injection; and transfers of toxic chemicals to Publicly Owned Treatment Works (POTW), and for disposal, treatment and other off-site transfers during the TRI reporting years 1988--1992. Geographic coverage is limited to the US side of the ``Border Area``, the geographic area situated within 100 km of the US/Mexico international boundary. A primary purpose of this study is to provide background information that can be used in the future development of potential ``indicator variables`` for tracking environmental and public health status in the Border Area in conjunction with the implementation of the North American Free Trade Agreement (NAFTA).

Inventory Control System by Using Vendor Managed Inventory (VMI)

Science.gov (United States)

Sabila, Alzena Dona; Mustafid; Suryono

2018-02-01

The inventory control system has a strategic role for the business in managing inventory operations. Management of conventional inventory creates problems in the stock of goods that often runs into vacancies and excess goods at the retail level. This study aims to build inventory control system that can maintain the stability of goods availability at the retail level. The implementation of Vendor Managed Inventory (VMI) method on inventory control system provides transparency of sales data and inventory of goods at retailer level to supplier. Inventory control is performed by calculating safety stock and reorder point of goods based on sales data received by the system. Rule-based reasoning is provided on the system to facilitate the monitoring of inventory status information, thereby helping the process of inventory updates appropriately. Utilization of SMS technology is also considered as a medium of collecting sales data in real-time due to the ease of use. The results of this study indicate that inventory control using VMI ensures the availability of goods ± 70% and can reduce the accumulation of goods ± 30% at the retail level.

Modelling African aerosol using updated fossil fuel and biofuel emission inventories for 2005 and 2030

Science.gov (United States)

Liousse, C.; Penner, J. E.; Assamoi, E.; Xu, L.; Criqui, P.; Mima, S.; Guillaume, B.; Rosset, R.

2010-12-01

A regional fossil fuel and biofuel emission inventory for particulates has been developed for Africa at a resolution of 0.25° x 0.25° for the year 2005. The original database of Junker and Liousse (2008) was used after modification for updated regional fuel consumption and emission factors. Consumption data were corrected after direct inquiries conducted in Africa, including a new emitter category (i.e. two-wheel vehicles including “zemidjans”) and a new activity sector (i.e. power plants) since both were not considered in the previous emission inventory. Emission factors were measured during the 2005 AMMA campaign (Assamoi and Liousse, 2010) and combustion chamber experiments. Two prospective inventories for 2030 are derived based on this new regional inventory and two energy consumption forecasts by the Prospective Outlook on Long-term Energy Systems (POLES) model (Criqui, 2001). The first is a reference scenario, where no emission controls beyond those achieved in 2003 are taken into account, and the second is for a "clean" scenario where possible and planned policies for emission control are assumed to be effective. BC and OCp emission budgets for these new inventories will be discussed and compared to the previous global dataset. These new inventories along with the most recent open biomass burning inventory (Liousse et al., 2010) have been tested in the ORISAM-TM5 global chemistry-climate model with a focus over Africa at a 1° x 1° resolution. Global simulations for BC and primary OC for the years 2005 and 2030 are carried out and the modelled particulate concentrations for 2005 are compared to available measurements in Africa. Finally, BC and OC radiative properties (aerosol optical depths and single scattering albedo) are calculated and the direct radiative forcing is estimated using an off line model (Wang and Penner, 2009). Results of sensitivity tests driven with different emission scenarios will be presented.

Inventory of LCIA selection methods for assessing toxic releases. Methods and typology report part B

DEFF Research Database (Denmark)

Larsen, Henrik Fred; Birkved, Morten; Hauschild, Michael Zwicky

method(s) in Work package 8 (WP8) of the OMNIITOX project. The selection methods and the other CRS methods are described in detail, a set of evaluation criteria are developed and the methods are evaluated against these criteria. This report (Deliverable 11B (D11B)) gives the results from task 7.1d, 7.1e......This report describes an inventory of Life Cycle Impact Assessment (LCIA) selection methods for assessing toxic releases. It consists of an inventory of current selection methods and other Chemical Ranking and Scoring (CRS) methods assessed to be relevant for the development of (a) new selection...... and 7.1f of WP 7 for selection methods. The other part of D11 (D11A) is reported in another report and deals with characterisation methods. A selection method is a method for prioritising chemical emissions to be included in an LCIA characterisation of toxic releases, i.e. calculating indicator scores...

The Relationship between Toxics Release Inventory Discharges and Mortality Rates in Rural and Urban Areas of the United States

Science.gov (United States)

Hendryx, Michael; Fedorko, Evan

2011-01-01

Background: Potential environmental exposures from chemical manufacturing or industrial sites have not been well studied for rural populations. The current study examines whether chemical releases from facilities monitored through the Toxics Release Inventory (TRI) program are associated with population mortality rates for both rural and urban…

Inventory Control System by Using Vendor Managed Inventory (VMI

Directory of Open Access Journals (Sweden)

Dona Sabila Alzena

2018-01-01

Full Text Available The inventory control system has a strategic role for the business in managing inventory operations. Management of conventional inventory creates problems in the stock of goods that often runs into vacancies and excess goods at the retail level. This study aims to build inventory control system that can maintain the stability of goods availability at the retail level. The implementation of Vendor Managed Inventory (VMI method on inventory control system provides transparency of sales data and inventory of goods at retailer level to supplier. Inventory control is performed by calculating safety stock and reorder point of goods based on sales data received by the system. Rule-based reasoning is provided on the system to facilitate the monitoring of inventory status information, thereby helping the process of inventory updates appropriately. Utilization of SMS technology is also considered as a medium of collecting sales data in real-time due to the ease of use. The results of this study indicate that inventory control using VMI ensures the availability of goods ± 70% and can reduce the accumulation of goods ± 30% at the retail level.

RSAC, Gamma Doses, Inhalation and Ingestion Doses, Fission Products Inventory after Fission Products Release

International Nuclear Information System (INIS)

Richardson, L.C.

1967-01-01

1 - Description of problem or function: RSAC generates a fission product inventory from a given set of reactor operating conditions and then computes the external gamma dose, the deposition gamma dose, and the inhalation-ingestion dose to critical body organs as a result of exposure to these fission products. Program output includes reactor operating history, fission product inventory, dosages, and ingestion parameters. 2 - Method of solution: The fission product inventory generated by the reactor operating conditions and the inventory remaining at various times after release are computed using the equations of W. Rubinson in Journal of Chemical Physics, Vol. 17, pages 542-547, June 1949. The external gamma dose and the deposition gamma dose are calculated by determining disintegration rates as a function of space and time, then integrating using Hermite's numerical techniques for the spatial dependence. The inhalation-ingestion dose is determined by the type and quantity of activity inhaled and the biological rate of decay following inhalation. These quantities are integrated with respect to time to obtain the dosage. The ingestion dose is related to the inhalation dose by an input constant

LANDFIRE 2010—Updates to the national dataset to support improved fire and natural resource management

Science.gov (United States)

Nelson, Kurtis J.; Long, Donald G.; Connot, Joel A.

2016-02-29

The Landscape Fire and Resource Management Planning Tools (LANDFIRE) 2010 data release provides updated and enhanced vegetation, fuel, and fire regime layers consistently across the United States. The data represent landscape conditions from approximately 2010 and are the latest release in a series of planned updates to maintain currency of LANDFIRE data products. Enhancements to the data products included refinement of urban areas by incorporating the National Land Cover Database 2006 land cover product, refinement of agricultural lands by integrating the National Agriculture Statistics Service 2011 cropland data layer, and improved wetlands delineations using the National Land Cover Database 2006 land cover and the U.S. Fish and Wildlife Service National Wetlands Inventory data. Disturbance layers were generated for years 2008 through 2010 using remotely sensed imagery, polygons representing disturbance events submitted by local organizations, and fire mapping program data such as the Monitoring Trends in Burn Severity perimeters produced by the U.S. Geological Survey and the U.S. Forest Service. Existing vegetation data were updated to account for transitions in disturbed areas and to account for vegetation growth and succession in undisturbed areas. Surface and canopy fuel data were computed from the updated vegetation type, cover, and height and occasionally from potential vegetation. Historical fire frequency and succession classes were also updated. Revised topographic layers were created based on updated elevation data from the National Elevation Dataset. The LANDFIRE program also released a new Web site offering updated content, enhanced usability, and more efficient navigation.

1997 toxic chemical release inventory. Emergency Planning and Community Right-To-Know Act, Section 313

International Nuclear Information System (INIS)

Zaloudek, D.E.

1998-01-01

Two listed toxic chemicals were used at the Hanford Site above established activity thresholds: phosphoric acid and chlorine. Because total combined quantities of chlorine released, disposed, treated, recovered through recycle operations, co-combusted for energy recovery, and transferred to off-site locations for the purpose of recycle, energy recovery, treatment, and/or disposal, amounted to less than 500 pounds, the Hanford Site qualified for the alternate one million pound threshold for chlorine. Accordingly, this Toxic Chemical Release Inventory includes a Form A for chlorine, and a Form B for phosphoric acid

Assessing Canadian inventories to understand the environmental impacts of mercury releases to the Great Lakes region

International Nuclear Information System (INIS)

Trip, Luke; Bender, Tonya; Niemi, David

2004-01-01

North American pollutant release and transfer registries have been continuously developing with an eye to understanding source/receptor relationships and ensuring that the polluter-paid principle is applied to the appropriate parties. The potential contribution of mercury to the Great Lakes Basin arising from the rerelease of historic mercury pollution from contaminated aquatic and terrestrial media is poorly understood and the subject of concern. Although a considerable amount of data may be available on the atmospheric component of mercury releases to the Basin, further inventory work is needed to quantify the rerelease of the historic mercury. Much of the related existing inventory information is either not derived from direct measurement or not bounded by a mass-balance accounting. Critical to this determination is an increased confidence in the inventories of mercury from past and current practices. This may be enhanced through comprehensive and thorough surveys of contributions from specific products and their life-cycle assessments. An even greater challenge is to determine the bioavailability of the mercury emanating from land-based sources and from aquatic media. This paper describes the interplay among the sources and receptors of mercury and provides a quantitative assessment of current Canadian contributions of mercury as a contaminant to the Great Lakes. Recommendations for improved assessments are provided

Exploring Environmental Inequity in South Korea: An Analysis of the Distribution of Toxic Release Inventory (TRI Facilities and Toxic Releases

Directory of Open Access Journals (Sweden)

D. K. Yoon

2017-10-01

Full Text Available Recently, location data regarding the Toxic Release Inventory (TRI in South Korea was released to the public. This study investigated the spatial patterns of TRIs and releases of toxic substances in all 230 local governments in South Korea to determine whether spatial clusters relevant to the siting of noxious facilities occur. In addition, we employed spatial regression modeling to determine whether the number of TRI facilities and the volume of toxic releases in a given community were correlated with the community’s socioeconomic, racial, political, and land use characteristics. We found that the TRI facilities and their toxic releases were disproportionately distributed with clustered spatial patterning. Spatial regression modeling indicated that jurisdictions with smaller percentages of minorities, stronger political activity, less industrial land use, and more commercial land use had smaller numbers of toxic releases, as well as smaller numbers of TRI facilities. However, the economic status of the community did not affect the siting of hazardous facilities. These results indicate that the siting of TRI facilities in Korea is more affected by sociopolitical factors than by economic status. Racial issues are thus crucial for consideration in environmental justice as the population of Korea becomes more racially and ethnically diverse.

Executive Order 12898 and Social, Economic, and Sociopolitical Factors Influencing Toxic Release Inventory Facility Location in EPA Region 6: A Multi-Scale Spatial Assessment of Environmental Justice

Science.gov (United States)

Moore, Andrea Lisa

2013-01-01

Toxic Release Inventory facilities are among the many environmental hazards shown to create environmental inequities in the United States. This project examined four factors associated with Toxic Release Inventory, specifically, manufacturing facility location at multiple spatial scales using spatial analysis techniques (i.e., O-ring statistic and…

Update on prescription extended-release opioids and appropriate patient selection

Directory of Open Access Journals (Sweden)

Brennan MJ

2013-07-01

Full Text Available Michael J Brennan The Pain Center of Fairfield, Fairfield, CT, USA Abstract: Chronic pain is largely underdiagnosed, often undertreated, and expected to increase as the American population ages. Many patients with chronic pain require long-term treatment with analgesic medications, and pain management may involve use of prescription opioids for patients whose pain is inadequately controlled through other therapies. Yet because of the potential for abuse and addiction, many clinicians hesitate to treat their patients with pain with potentially beneficial agents. Finding the right opioid for the right patient is the first – often complicated – step. Ensuring that patients continue to properly use the medication while achieving therapeutic analgesic effects is the long-term goal. Combined with careful patient selection and ongoing monitoring, new formulations using extended-release technologies incorporating tamper-resistant features may help combat the growing risk of abuse or misuse, which will hopefully reduce individual suffering and the societal burden of chronic pain. The objective of this manuscript is to provide an update on extended-release opioids and to provide clinicians with a greater understanding of which patients might benefit from these new opioid formulations and how to integrate the recommended monitoring for abuse potential into clinical practice. Keywords: chronic pain, opioid analgesics, extended release, abuse prevention

Pollutant Release and Transfer Register

International Nuclear Information System (INIS)

2008-01-01

Since 1974 a number of organisations have been working closely together in this pollutant register (PRTR) project to collect and formally establish the yearly releases of pollutants to air, water and soil in the Netherlands. Results of this project serve to underpin the national environmental policy. Data is in this way also provided for the many environmental reports to international organisations such as the European Union and the United Nations, e.g. the National Inventory Report for the Kyoto Protocol. This website shows the yearly releases (emissions) of the most important pollutants in the Netherlands. You can explore the emission data through various channels, such as maps, graphs and tables. But you can also download all the details into your own database. The data shown in this website is updated 2 to 3 times a year. The current release shows emissions for 1990, 1995, 2000, 2004, 2005 and 2006 The 2006 emissions are preliminary data and not yet shown in the maps. We expect to add an extra year in August 2008 [nl

1992 Toxic Chemical Release Inventory: Emergency Planning and Community Right-To-Know-Act of 1986 Section 313

International Nuclear Information System (INIS)

1993-07-01

Section 313 of the Emergency Planning and Community Right-To-Know Act of 1986 (EPCRA) requires the annual submittal of toxic chemical release information to the US Environmental Protection Agency (EPA). The following document is the July 1993 submittal of the EPCRA Toxic Chemical Release Inventory Report (Form R). Included is a Form R for chlorine and for lead, the two chemicals used in excess of the established regulatory thresholds at the Hanford Site by the US Department of Energy, Richland Operations Office and its contractors during calendar year 1992

Influence of updating global emission inventory of black carbon on evaluation of the climate and health impact

Science.gov (United States)

Wang, Rong; Tao, Shu; Balkanski, Yves; Ciais, Philippe

2013-04-01

Black carbon (BC) is an air component of particular concern in terms of air quality and climate change. Black carbon emissions are often estimated based on the fuel data and emission factors. However, large variations in emission factors reported in the literature have led to a high uncertainty in previous inventories. Here, we develop a new global 0.1°×0.1° BC emission inventory for 2007 with full uncertainty analysis based on updated source and emission factor databases. Two versions of LMDz-OR-INCA models, named as INCA and INCA-zA, are run to evaluate the new emission inventory. INCA is built up based on a regular grid system with a resolution of 1.27° in latitude and 2.50° in longitude, while INCA-zA is specially zoomed to 0.51°×0.66° (latitude×longitude) in Asia. By checking against field observations, we compare our inventory with ACCMIP, which is used by IPCC in the 5th assessment report, and also evaluate the influence of model resolutions. With the newly calculated BC air concentrations and the nested model, we estimate the direct radiative forcing of BC and the premature death and mortality rate induced by BC exposure with Asia emphasized. Global BC direct radiative forcing at TOA is estimated to be 0.41 W/m2 (0.2 - 0.8 as inter-quartile range), which is 17% higher than that derived from the inventory adopted by IPCC-AR5 (0.34 W/m2). The estimated premature deaths induced by inhalation exposure to anthropogenic BC (0.36 million in 2007) and the percentage of high risk population are higher than those previously estimated. Ninety percents of the global total anthropogenic PD occur in Asia with 0.18 and 0.08 million deaths in China and India, respectively.

National dam inventory provides data for analysis

International Nuclear Information System (INIS)

Spragens, L.

1992-01-01

The Association of State Dam Safety Officials completed a dam inventory this fall. Information on approximately 90,000 state-regulated dams in the US collected during the four-year inventory is being used to build a database managed by the Federal Emergency Management Agency. In addition to ASDSO's work, the federal government conducted an inventory of federal dams. This data will be added to the state information to form one national database. The database will feature 35 data fields for each entry, including the name of the dam, its size, the name of the nearest downstream community, maximum discharge and storage volume, the date of the last inspection, and details about the emergency action plan. The program is an update of the nation's first dam inventory, required by the Dam Safety Act of 1972. The US Army Corps of Engineers completed the original inventory in 1981. The Water Resources Development Act of 1986 authorized appropriations of $2.5 million for the Corps to update the inventory. FEMA and the Corps entered into an agreement for FEMA to undertake the task for the Corps and to coordinate work on both the federal and state inventories. ASDSO compiles existing information on state-regulated dams into a common format for the database, added missing information, and established a process for continually updating data. ASDSO plans to analyze the information collected for the database. It will look at statistics for the number of dams regulated, communities that could be affected, and the number of high-hazard dams. FEMA is preparing reports for Congress on the project. The reports, which are expected to be ready by May 1993, will include information on the methodology used and facts about regulated dams under state jurisdiction

1998 Toxic Chemical Release Inventory Report for the Emergency Planning and Community Right-to-Know Act of 1986, Title III

International Nuclear Information System (INIS)

Stockton, Marjorie B.

1999-01-01

The Emergency Planning and Community Right-to-Know Act (EPCRA) of 1986 [also known as the Superfund Amendment and Reauthorization Act (SARA), Title III], as modified by Executive Order 12856, requires that all federal facilities evaluate the need to submit an annual Toxic Chemical Release Inventory report as prescribed in Title III, Section 313 of this Act. This annual report is due every July for the preceding calendar year. Owners and operators who manufacture, process, or otherwise use certain toxic chemicals above listed threshold quantities are required to report their toxic chemical releases to all environmental mediums (air, water, soil, etc.). At Los Alamos National Laboratory (LANL), no EPCRA Section 313 chemicals were used in 1998 above the reportable threshold limits of 10,000 lb or 25,000 lb. Therefore LANL was not required to submit any Toxic Chemical Release Inventory reports (Form Rs) for 1998. This document was prepared to provide a detailed description of the evaluation on chemical usage and EPCRA Section 313 threshold determinations for LANL for 1998

An Evaluation of a Fission Product Inventory for CANDU Fuels

International Nuclear Information System (INIS)

Jung, Jong Yeob; Park, Joo Hwan

2007-01-01

Fission products are released by two processes when a single channel accident occurs. One is a 'prompt release' and the other is a 'delayed release'. Prompt release assumes that the gap inventory of the fuel elements is released by a fuel element failure at the time of an accident. Delayed release assumes that the inventories within the grain or at the grain boundary are released after a accident due to a diffusion through grains, an oxidation of the fuel and an interaction between the fuel and the Zircaloy sheath. Therefore, the calculation of a fission product inventory and its distribution in a fuel during a normal operating is the starting point for the assessment of a fission product release for single channel accidents. In this report, the fission product inventories and their distributions within s fuel under a normal operating condition are evaluated for three types of CANDU fuels such as the 37 element fuel, CANFLEX-NU and CANFLEX-RU fuel bundles in the 'limiting channel'. To accomplish the above mentioned purposes, the basic power histories for each type of CANDU fuel were produced and the fission product inventories were calculated by using the ELESTRES code

Project SAFE. Update of the SFR-1 safety assessment. Phase 1. Appendix A1: Inventory

International Nuclear Information System (INIS)

Riggare, P.

1998-01-01

One of the aims in the safety assessment of SFR-1 is to estimate the release to the environment. In order to make these calculations there is a need to describe the inventory in greater detail. The new computerised database of waste in SFR-1 gives a good possibility to achieve this. The aim for project SAFE is to make both conservative and realistic radionuclide transport calculations. To achieve this goal there must be two inventories. The conservative inventory is the inventory used in the design of the repository, which in most parts is identical with the limits in the licence for SFR-1. There is a great interest to have good estimates of the volumes of the different waste types. A thorough prognosis should be made in 1999, but until then the latest one from 1995 could be used in the calculations. The total (actual) inventory of nuclides is calculated from the measurements of the easy-to-measure nuclides since, in principle, all hard-to-measure nuclides are calculated by correlation factors to 60 Co and 137 Cs . These factors should be reviewed since there are quite large uncertainties involved. 14 C dominates the individual doses after a few hundred years and the collective dose in the inland-scenario. The amount of the nuclide is uncertain since the correlation factor is very uncertain. The chemical speciation of 14 C is also of interest due to different properties of organic and inorganic carbon. 36 Cl is very hard to measure. Although the authorities in their reviews of the safety reports say that there probably are small doses from chlorine, the inventory should be improved. 59 Ni is a long-lived nuclide that sets a limit to the close-to-the-core metal scrap that can be taken to SFR- 1. There is an ongoing research project to provide a better measuring method for 59 Ni. This should make it possible to improve the knowledge about 59 Ni inventory. The assumption that 90 % of the inventory is collected in the ion-exchange resins should be checked. Actinides

1995 Toxic chemical release inventory: Emergency Planning and Community Right-to-Know Act of 1986, Section 313

International Nuclear Information System (INIS)

Mincey, S.L.

1996-08-01

Section 313 of the Emergency Planning and Community Right-To-Know Act (EPCRA) requires the annual submittal of toxic chemical release information to the U.S. Environmental Protection Agency.Executive Order 12856, 'Federal Compliance With Right-to-Know Laws and Pollution Prevention Requirements' extends the requirements of EPCRA to all Federal agencies. The following document is the August 1996 submittal of the Hanford Site Toxic Chemical Release Inventory report. Included is a Form R for ethylene glycol, the sole chemical used in excess of the established regulatory thresholds at the Hanford Site by the U.S. Department of Energy, Richland Operations Office and its contractors during Calendar Year 1995

Updated on effluents releases of the CEA nuclear fuel cycle facilities - 1995 to 2010 period

Energy Technology Data Exchange (ETDEWEB)

Ferreira, Nelson Luiz Dias [Centro Tecnologico da Marinha em Sao Paulo (CTMSP) Sao Paulo, SP (Brazil)

2011-07-01

The environmental impact assessment of the Centro Experimental Aramar (CEA) facilities has been presented in a former work, based on the measured effluent releases data, for the period from 1995 to 2007. This work shows the update up to 2010. The effluents releases to the environment result from the routine operation of CEA nuclear fuel cycle facilities (LEI - Isotopic Enrichment Laboratory, USIDE - Pilot Plant for Industrial Verification of Uranium Enrichment and LABMAT - Nuclear Materials Laboratory). Basically, this work presents the radioactive release source terms, as described at the CEA Effluent Report sent to the National Commission for Nuclear Energy (CNEN) each semester, and a historical assessment of the critical group annual doses from 1995 up to 2010. The assessed doses are compared to the maximum dose constraint as well as to the exemption level specified by CNEN. (author)

Updated on effluents releases of the CEA nuclear fuel cycle facilities - 1995 to 2010 period

International Nuclear Information System (INIS)

Ferreira, Nelson Luiz Dias

2011-01-01

The environmental impact assessment of the Centro Experimental Aramar (CEA) facilities has been presented in a former work, based on the measured effluent releases data, for the period from 1995 to 2007. This work shows the update up to 2010. The effluents releases to the environment result from the routine operation of CEA nuclear fuel cycle facilities (LEI - Isotopic Enrichment Laboratory, USIDE - Pilot Plant for Industrial Verification of Uranium Enrichment and LABMAT - Nuclear Materials Laboratory). Basically, this work presents the radioactive release source terms, as described at the CEA Effluent Report sent to the National Commission for Nuclear Energy (CNEN) each semester, and a historical assessment of the critical group annual doses from 1995 up to 2010. The assessed doses are compared to the maximum dose constraint as well as to the exemption level specified by CNEN. (author)

Air Emission Inventory for the INEEL -- 1999 Emission Report

Energy Technology Data Exchange (ETDEWEB)

Zohner, Steven K

2000-05-01

This report presents the 1999 calendar year update of the Air Emission Inventory for the Idaho National Engineering and Environmental Laboratory (INEEL). The INEEL Air Emission Inventory documents sources and emissions of nonradionuclide pollutants from operations at the INEEL. The report describes the emission inventory process and all of the sources at the INEEL, and provides nonradionuclide emissions estimates for stationary sources.

Atmospheric release model for the E-area low-level waste facility: Updates and modifications

International Nuclear Information System (INIS)

None, None

2017-01-01

The atmospheric release model (ARM) utilizes GoldSim® Monte Carlo simulation software (GTG, 2017) to evaluate the flux of gaseous radionuclides as they volatilize from E-Area disposal facility waste zones, diffuse into the air-filled soil pores surrounding the waste, and emanate at the land surface. This report documents the updates and modifications to the ARM for the next planned E-Area PA considering recommendations from the 2015 PA strategic planning team outlined by Butcher and Phifer.

Atmospheric release model for the E-area low-level waste facility: Updates and modifications

Energy Technology Data Exchange (ETDEWEB)

None, None

2017-11-16

The atmospheric release model (ARM) utilizes GoldSim® Monte Carlo simulation software (GTG, 2017) to evaluate the flux of gaseous radionuclides as they volatilize from E-Area disposal facility waste zones, diffuse into the air-filled soil pores surrounding the waste, and emanate at the land surface. This report documents the updates and modifications to the ARM for the next planned E-Area PA considering recommendations from the 2015 PA strategic planning team outlined by Butcher and Phifer.

7 CFR 930.57 - Secondary inventory reserve.

Science.gov (United States)

2010-01-01

... shall retain control over the release of any cherries from the secondary inventory reserve. No cherries... 7 Agriculture 8 2010-01-01 2010-01-01 false Secondary inventory reserve. 930.57 Section 930.57... Handling Regulations § 930.57 Secondary inventory reserve. (a) In the event the inventory reserve...

Texas, 2008 forest inventory and analysis factsheet

Science.gov (United States)

James Bentley

2011-01-01

This science update summarizes the findings of the first statewide annual inventory conducted by the Southern Forest Inventory and Analysis (FIA) Program in cooperation with the Texas Forest Service of the forest resource attributes in Texas. The 254 counties of Texas are consolidated into seven FIA survey units—southeast (unit 1), the northeast (unit 2), the north...

Texas, 2010 forest inventory and analysis factsheet

Science.gov (United States)

James W. Bentley

2012-01-01

This science update summarizes the findings of the statewide annual inventory conducted by the Southern Forest Inventory and Analysis (FIA) Program in cooperation with the Texas Forest Service of the forest resource attributes in Texas. The 254 counties of Texas are consolidated into seven FIA survey units – southeast (unit 1), northeast (unit 2), north central (unit 3...

Mercury emissions inventory for 2014 in Costa Rica using the PNUMA Toolkit to a N2 level

Directory of Open Access Journals (Sweden)

Julio César Murillo-Hernández

2017-12-01

Full Text Available The Minamata Convention was signed in October 2013 to protect human health and the environment from releases and anthropogenic emissions of elemental mercury and compounds containing this element.  When Costa Rica ratified this instrument, the country committed to develop and keep updated an inventory of emissions from the relevant sources of mercury. In the present work, the tool proposed by UNEP was used to generate the first mercury inventory at the N2 level of the country, which considers releases of mercury in air, water, soil, product and waste matrices. Taking 2014 as the reference year, the estimated mercury emission for Costa Rica was recorded at 5 052 kg, with an uncertainty interval between 2 675 kg and 10 525 kg; and the most important sectors in terms of the total emission were the extraction of gold with amalgamation (42 %, informal burning of waste (15 % and use of dental amalgams (10 %. The most impacted matrices were air (29 %, water (28 % and soil (21 %, respectively.

Landslide inventory updating by means of Persistent Scatterer Interferometry (PSI: the Setta basin (Italy case study

Directory of Open Access Journals (Sweden)

Frangioni Sara

2015-07-01

Full Text Available This paper illustrates the contribution of Persistent Scatterer SAR Interferometry (PSInSAR technique to landslide detection, using interferometric data acquired in C-band by European remote-sensing satellite (ERS 1/2 and environmental satellite (ENVISAT satellites. The main purpose is to update a pre-existing landslide inventory map, by changing or confirming the landslide geometry and state of activity and eventually, identifying new phenomena.This work presents an application of satellite remote sensing to analyse ground displacement movements in the Setta basin, located on the northern Appennine (Bologna province, Italy and extended up 268 km2.The proposed methodology, resting upon pre-existing works already consolidated in the scientific community, combines interferometric measures with aerial imagery and other auxiliary data, in order to detect landslide indicators, finally validated with field surveys. The use of an activity matrix allows the identification of the state of activity of landslide phenomena with respect to the velocity of the radar displacement rates. Field validations are carried out in the areas that are more relevant because of the highest ground velocities and the presence of structures extensively affected by ground movements.The final updated landslide database of the Setta basin, based on Persistent Scatterer Interferometry analysis and in situ checks, consists of 1550 landslides, 236 of which have persistent scatterer information.

East Texas, 2011 forest inventory and analysis factsheet

Science.gov (United States)

Jason A. Cooper; James W. Bentley

2012-01-01

This science update summarizes the findings of the annual inventory conducted by the Southern Forest Inventory and Analysis (FIA) Program in cooperation with the Texas Forest Service of the forest resource attributes in east Texas. The 254 counties of Texas are consolidated into 7 FIA survey units—southeast (unit 1), northeast (unit 2), north central (unit 3), south (...

General technical requirements (GTR) for inventory monitoring systems (IMS) for the trilateral initiative

International Nuclear Information System (INIS)

Pshakin, Gennady M.; Kuleshov, I.; Shea, T.; Puckett, J.M.; Zhukov, I.; Mangan, Dennis L.; Matter, John C.; Waddoups, I.; Smathers, D.; Abhold, M.E.; Hsue, S.-T.; Chiaro, P.

2002-01-01

Pursuant to the Trilateral Initiative, the three parties (The Russian Federation, the United States, and the International Atomic Energy Agency) have been engaged in discussions concerning the structure of reliable monitoring systems for storage facilities having large inventories. The intent of these monitoring systems is to provide the capability for the IAEA to maintain continuity of knowledge in a sufficiently reliable manner that should there be equipment failure, loss of continuity of knowledge would be restricted to a small population of the inventory, and thus reinventory of the stored items would be minimized These facility-specific monitoring systems, referred to as Inventory Monitoring Systems (IMS) are to provide the principal means for the M A to assure that the containers of fissile material remain accounted under the Verification Agreements which are to be concluded between the IAEA and the Russian Federation and the lAEA and the United States for the verification of weapon-origin and other fissile material specified by each State as released from its defense programs. A technical experts working group for inventory monitoring systems has been meeting since Feb- of 2000 to formulate General Technical Requirements (GTR) for Inventory Monitoring Systems for the Trilateral Initiative. Although provisional agreement has been reached by the three parties concerning the GTR, it is considered a living document that can be updated as warranted by the three parties. This paper provides a summary of the GTR as it currently exists.

An update on radioactive release and exposures after the Fukushima Dai-ichi nuclear disaster.

LENUS (Irish Health Repository)

McLaughlin, P D

2012-09-01

On 11 March 2011, the Richter scale 0.9-magnitude Tokohu earthquake and tsunami struck the northeast coast of Japan, resulting in widespread injury and loss of life. Compounding this tragic loss of life, a series of equipment and structural failures at the Fukushima Dai-ichi nuclear power plant (FDNP) resulted in the release of many volatile radioisotopes into the atmosphere. In this update, we detail currently available evidence about the nature of immediate radioactive exposure to FDNP workers and the general population. We contrast the nature of the radioactive exposure at FDNP with that which occurred at the Chernobyl power plant 25 years previously. Prediction of the exact health effects related to the FDNP release is difficult at present and this disaster provides the scientific community with a challenge to help those involved and to continue research that will improve our understanding of the potential complications of radionuclide fallout.

Minnesota DNR Forest Stand Inventory Version 2

Data.gov (United States)

Minnesota Department of Natural Resources — This layer is a digital inventory of individual forest stands. The data is collected by DNR Foresters in each DNR Forestry Administrative Area, and is updated on a...

Updated site compilation of the Latin American Pollen Database

NARCIS (Netherlands)

Flantua, S.G.A.; Hooghiemstra, H.; Grimm, E.C.; Behling, H.; Bush, M.B; González-Arrango, C.; Gosling, W.D.; Ledru, M.-P.; Lozano-Garciá, S.; Maldonado, A.; Prieto, A.R.; Rull, V.; van Boxel, J.H.

2015-01-01

The updated inventory of the Latin American Pollen Database (LAPD) offers a wide range of new insights. This paper presents a systematic compilation of palynological research in Latin America. A comprehensive inventory of publications in peer-reviewed and grey literature shows a major expansion of

Amoco/Environmental Protection Agency Pollution Prevention Project, Yorktown refinery. Refinery release inventory. Final report

International Nuclear Information System (INIS)

Klee, H.; Kizier, G.J.; Baloo, S.; Hockman, E.L.; Couzens-Roberts, C.

1992-07-01

The report volume summarizes physical data obtained during a 2-year pollution prevention study of Amoco Oil Company's Yorktown Virginia Refinery. The study was jointly sponsored as a cooperative effort of Amoco Corporation and the United States Environmental Protection Agency. A multi-media sampling program was used to identify potential pollution sources within the Refinery. Sampling and analysis included air, surface water, groundwater, and solid waste data. Public perceptions about environmental issues of concern in the vicinity of the Refinery were also surveyed. The inventory showed that nearly 99 percent of the releases were airborne at the facility. Most of the remainder involved land disposal of solid wastes. Specific sources of major pollutants are identified

Inventory of armourstone

Directory of Open Access Journals (Sweden)

Le Turdu Valéry

2016-01-01

Full Text Available Natural armourstone is widely used for hydraulic works, both in the coastal domain and in border of rivers and torrents, especially to protect against flood and the effects of waves and currents. To meet the expectations associated with this resource, an inventory of armourstone quarries was realized on a national scale in France. This inventory informs not only about the localization of quarries but also about the quality and the availability of materials. To fully optimize this inventory in a dynamic format, the association of all actors of the sector was preferred to archival research. This partnership approach led to project deliverables that can constitute durably a shared reference. The database can indeed be updated regularly thanks to the contacts established with the professionals of quarries. The access to this database is offered to a wide public: maritime and fluvial ports, local authorities in charge of planning and managing structures that protect against flood and other hydraulic hazards. This new database was organized considering its importance on the operational plan. This led to a hierarchical organization at two levels for each quarry face: first level, a synthesis sheet brings the essential information to realize choices upstream to the operational phases. Second level, a detailed specification sheet presents the technical characteristics observed in the past on the considered face. The atlas has two information broadcasting formats: a pdf file with browsing functions and a geographical information system that allows remote request of the database. These two media have their own updating rhythms, annual for the first and continue for the second.

Real-time plutonium accountability and inventory control system

International Nuclear Information System (INIS)

Sarich, J.P.

An on-line inventory system for a large storage and processing facility is planned. A terminal system will provide for interactive updating and information retrieval. The data base will contain information on inventory items and transactions, as well as process monitoring information and laboratory bookkeeping data. Access to the terminals, as well as the storage vaults, will be controlled by fingerprint comparison with a personnel identification data base. Bar code labels attached to each inventory item will be read by a light pen during physical inventories and when materials are transferred. The use of devices to continuously monitor and control storage locations within the vaults is planned. (U.S.)

Real-time plutonium accountability and inventory control system

International Nuclear Information System (INIS)

Sarich, J.P.

1975-01-01

An on-line inventory system for a large storage and processing facility is planned. A terminal system will provide for interactive updating and information retrieval. The data base will contain information on inventory items and transactions, as well as process monitoring information and laboratory bookkeeping data. Access to the terminals, as well as the storage vaults, will be controlled by fingerprint comparison with a personnel identification data base. Bar code labels attached to each inventory item will be read by a light pen during physical inventories and when material is transferred. The use of devices to continuously monitor and control s locations within the vaults is planned

Inventory Abstraction

International Nuclear Information System (INIS)

Leigh, C.

2000-01-01

The purpose of the inventory abstraction as directed by the development plan (CRWMS M and O 1999b) is to: (1) Interpret the results of a series of relative dose calculations (CRWMS M and O 1999c, 1999d). (2) Recommend, including a basis thereof, a set of radionuclides that should be modeled in the Total System Performance Assessment in Support of the Site Recommendation (TSPA-SR) and the Total System Performance Assessment in Support of the Final Environmental Impact Statement (TSPA-FEIS). (3) Provide initial radionuclide inventories for the TSPA-SR and TSPA-FEIS models. (4) Answer the U.S. Nuclear Regulatory Commission (NRC)'s Issue Resolution Status Report ''Key Technical Issue: Container Life and Source Term'' (CLST IRSR) (NRC 1999) key technical issue (KTI): ''The rate at which radionuclides in SNF [Spent Nuclear Fuel] are released from the EBS [Engineered Barrier System] through the oxidation and dissolution of spent fuel'' (Subissue 3). The scope of the radionuclide screening analysis encompasses the period from 100 years to 10,000 years after the potential repository at Yucca Mountain is sealed for scenarios involving the breach of a waste package and subsequent degradation of the waste form as required for the TSPA-SR calculations. By extending the time period considered to one million years after repository closure, recommendations are made for the TSPA-FEIS. The waste forms included in the inventory abstraction are Commercial Spent Nuclear Fuel (CSNF), DOE Spent Nuclear Fuel (DSNF), High-Level Waste (HLW), naval Spent Nuclear Fuel (SNF), and U.S. Department of Energy (DOE) plutonium waste. The intended use of this analysis is in TSPA-SR and TSPA-FEIS. Based on the recommendations made here, models for release, transport, and possibly exposure will be developed for the isotopes that would be the highest contributors to the dose given a release to the accessible environment. The inventory abstraction is important in assessing system performance because

Updated estimates of 239240Pu + 241Am inventory, spatial pattern, and soil tonnage for removal at Nuclear Site-201, NTS

International Nuclear Information System (INIS)

Simpson, J.C.; Gilbert, R.O.

1982-04-01

Updated estimates of 239 240 Pu + 241 Am inventory and spatial pattern in surface soil are given for Nuclear Site (NS)-201 in Area 18 of the Nevada Test Site (NTS). These new estimates are based on 712 241 Am soil concentrations including 185 data values not previously available. Estimates were obtained using essentially the same Kriging techniques and the estimated average 239 240 Pu to 241 Am ratio of 7.5 used by Simpson and Gilbert (1980) to obtain previous results. Estimated concentration contours, 68% confidence bands for the contours and estimated median concentrations for 50 x 50 ft blocks are given. The total Pu + Am inventory estimated to be in the top 5 cm of soil over the 109 hectare study (an area 5.2 hectares larger than used by Simpson and Gilbert, 1980) is approximately 16.3 curies. The approximate 68% confidence interval on this inventory estimate is about 6.7 to 45.6 curies. It is estimated that about 58 acres (approx. = 23 hectares) of land in the study are contaminated at levels greater than 40 pCi/g which includes about 40 acres (approx. = 16 hectares) at levels greater than 160 pCi/g. Approximately 28,000 tons of soil would need to be removed (to 15 cm depth) to clean up all areas with estimated concentrates greater than or equal to 160 pCi/g. About 41,000 tons would require removal at the 40 pCi/g level. These new estimates of inventory and spatial patterns are within the range of sampling error of previous estimates obtained by Simpson and Gilbert

East Texas, 2012—Forest Inventory and Analysis Factsheet

Science.gov (United States)

Thomas J. Brandeis; Jason A. Cooper; James W. Bentley

2014-01-01

This science update summarizes the findings of the statewide annual inventory of the forest resource attributes in Texas conducted by the Southern Forest Inventory and Analysis (FIA) Program in cooperation with the Texas A&M Forest Service. The 254 counties of Texas are consolidated into seven FIA survey units—southeast (unit 1), northeast (unit 2), north central (...

Air emission inventory for the Idaho National Engineering Laboratory: 1994 emissions report

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-07-01

This report Presents the 1994 update of the Air Emission inventory for the Idaho National Engineering Laboratory (INEL). The INEL Air Emission Inventory documents sources and emissions of non-radionuclide pollutants from operations at the INEL. The report describes the emission inventory process and all of the sources at the INEL, and provides non-radionuclide emissions estimates for stationary sources.

Air emission inventory for the Idaho National Engineering Laboratory: 1994 emissions report

International Nuclear Information System (INIS)

1995-07-01

This report Presents the 1994 update of the Air Emission inventory for the Idaho National Engineering Laboratory (INEL). The INEL Air Emission Inventory documents sources and emissions of non-radionuclide pollutants from operations at the INEL. The report describes the emission inventory process and all of the sources at the INEL, and provides non-radionuclide emissions estimates for stationary sources

Projecting other public inventories for the 2005 RPA timber assessment update.

Science.gov (United States)

Xiaoping Zhou; John R. Mills; Richard W. Haynes

2007-01-01

This study gives an overview of the current inventory status and the projection of future forest inventories on other public timberland. Other public lands are lands administered by state, local, and federal government but excluding National Forest System lands. These projections were used as part of the 2005 USDA Forest Service Resource Planning Act timber assessment...

RCBI-II: The Second Revision of the Revised Cyber Bullying Inventory

Science.gov (United States)

Topcu, Çigdem; Erdur-Baker, Özgür

2018-01-01

The aim of this study is to update the Turkish version of the Revised Cyber Bullying Inventory (RCBI) and eliminate specific technology names. Validity and reliability tests were carried out with 1,803 high school students. The updated version of the RCBI yields valid and reliable scores measuring cyberbullying and victimization.

Automated Inventory Control System for Nigeria Power Holding ...

African Journals Online (AJOL)

The company may want to release some capital from its inventory investment by reducing stock levels. In addition, manual ways of handling inventory has failed to cope with factors like ... graphical interface ability for decision making.

Updated Life-Cycle Assessment of Aluminum Production and Semi-fabrication for the GREET Model

Energy Technology Data Exchange (ETDEWEB)

Dai, Qiang [Argonne National Lab. (ANL), Argonne, IL (United States); Kelly, Jarod C. [Argonne National Lab. (ANL), Argonne, IL (United States); Burnham, Andrew [Argonne National Lab. (ANL), Argonne, IL (United States); Elgowainy, Amgad [Argonne National Lab. (ANL), Argonne, IL (United States)

2015-09-01

This report serves as an update for the life-cycle analysis (LCA) of aluminum production based on the most recent data representing the state-of-the-art of the industry in North America. The 2013 Aluminum Association (AA) LCA report on the environmental footprint of semifinished aluminum products in North America provides the basis for the update (The Aluminum Association, 2013). The scope of this study covers primary aluminum production, secondary aluminum production, as well as aluminum semi-fabrication processes including hot rolling, cold rolling, extrusion and shape casting. This report focuses on energy consumptions, material inputs and criteria air pollutant emissions for each process from the cradle-to-gate of aluminum, which starts from bauxite extraction, and ends with manufacturing of semi-fabricated aluminum products. The life-cycle inventory (LCI) tables compiled are to be incorporated into the vehicle cycle model of Argonne National Laboratory’s Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET) Model for the release of its 2015 version.

2004 Toxic Chemical Release Inventory Report for the Emergency Planning and Community Right-to-Know Act of 1986, Title III, Section 313

Energy Technology Data Exchange (ETDEWEB)

M. Stockton

2006-01-15

Section 313 of Emergency Planning and Community Right-to-Know Act (EPCRA) specifically requires facilities to submit a Toxic Chemical Release Inventory Report (Form R) to the U.S. Environmental Protection Agency (EPA) and state agencies if the owners and operators manufacture, process, or otherwise use any of the listed toxic chemicals above listed threshold quantities. EPA compiles this data in the Toxic Release Inventory database. Form R reports for each chemical over threshold quantities must be submitted on or before July 1 each year and must cover activities that occurred at the facility during the previous year. For reporting year 2004, Los Alamos National Laboratory (LANL or the Laboratory) submitted Form R reports for lead compounds, nitric acid, and nitrate compounds as required under the EPCRA Section 313. No other EPCRA Section 313 chemicals were used in 2004 above the reportable thresholds. This document provides a description of the evaluation of EPCRA Section 313 chemical use and threshold determinations for LANL for calendar year 2004, as well as background information about data included on the Form R reports.

INVENTORY ABSTRACTION

International Nuclear Information System (INIS)

Ragan, G.

2001-01-01

The purpose of the inventory abstraction, which has been prepared in accordance with a technical work plan (CRWMS M andO 2000e for/ICN--02 of the present analysis, and BSC 2001e for ICN 03 of the present analysis), is to: (1) Interpret the results of a series of relative dose calculations (CRWMS M andO 2000c, 2000f). (2) Recommend, including a basis thereof, a set of radionuclides that should be modeled in the Total System Performance Assessment in Support of the Site Recommendation (TSPA-SR) and the Total System Performance Assessment in Support of the Final Environmental Impact Statement (TSPA-FEIS). (3) Provide initial radionuclide inventories for the TSPA-SR and TSPA-FEIS models. (4) Answer the U.S. Nuclear Regulatory Commission (NRC)'s Issue Resolution Status Report ''Key Technical Issue: Container Life and Source Term'' (CLST IRSR) key technical issue (KTI): ''The rate at which radionuclides in SNF [spent nuclear fuel] are released from the EBS [engineered barrier system] through the oxidation and dissolution of spent fuel'' (NRC 1999, Subissue 3). The scope of the radionuclide screening analysis encompasses the period from 100 years to 10,000 years after the potential repository at Yucca Mountain is sealed for scenarios involving the breach of a waste package and subsequent degradation of the waste form as required for the TSPA-SR calculations. By extending the time period considered to one million years after repository closure, recommendations are made for the TSPA-FEIS. The waste forms included in the inventory abstraction are Commercial Spent Nuclear Fuel (CSNF), DOE Spent Nuclear Fuel (DSNF), High-Level Waste (HLW), naval Spent Nuclear Fuel (SNF), and U.S. Department of Energy (DOE) plutonium waste. The intended use of this analysis is in TSPA-SR and TSPA-FEIS. Based on the recommendations made here, models for release, transport, and possibly exposure will be developed for the isotopes that would be the highest contributors to the dose given a release

New Open-Source Version of FLORIS Released | News | NREL

Science.gov (United States)

New Open-Source Version of FLORIS Released New Open-Source Version of FLORIS Released January 26 , 2018 National Renewable Energy Laboratory (NREL) researchers recently released an updated open-source simplified and documented. Because of the living, open-source nature of the newly updated utility, NREL

Quality manual for the Danish greenhouse gas inventory

DEFF Research Database (Denmark)

Nielsen, Ole-Kenneth; Plejdrup, Marlene Schmidt; Winther, Morten

The report outlines the quality work undertaken by the emission inventory group at the Department of Environmental Science, Aarhus University in connection with the preparation and reporting of the Danish greenhouse gas inventory. The report updates and expands on the first version of the quality...... manual published in 2005. The report fulfils the mandatory requirements for a quality assurance/quality control (QA/QC) plan as lined out in the UNFCCC reporting guidelines and the specifications related to reporting under the Kyoto Protocol. The report describes all elements of the internal QC...... procedures as well as the QA and verification activities carried out in connection with the Danish greenhouse gas inventory....

Estimating dead wood during national forest inventories: a review of inventory methodologies and suggestions for harmonization.

Science.gov (United States)

Woodall, Christopher W; Rondeux, Jacques; Verkerk, Pieter J; Ståhl, Göran

2009-10-01

Efforts to assess forest ecosystem carbon stocks, biodiversity, and fire hazards have spurred the need for comprehensive assessments of forest ecosystem dead wood (DW) components around the world. Currently, information regarding the prevalence, status, and methods of DW inventories occurring in the world's forested landscapes is scattered. The goal of this study is to describe the status, DW components measured, sample methods employed, and DW component thresholds used by national forest inventories that currently inventory DW around the world. Study results indicate that most countries do not inventory forest DW. Globally, we estimate that about 13% of countries inventory DW using a diversity of sample methods and DW component definitions. A common feature among DW inventories was that most countries had only just begun DW inventories and employ very low sample intensities. There are major hurdles to harmonizing national forest inventories of DW: differences in population definitions, lack of clarity on sample protocols/estimation procedures, and sparse availability of inventory data/reports. Increasing database/estimation flexibility, developing common dimensional thresholds of DW components, publishing inventory procedures/protocols, releasing inventory data/reports to international peer review, and increasing communication (e.g., workshops) among countries inventorying DW are suggestions forwarded by this study to increase DW inventory harmonization.

Design options to minimize tritium inventories at Savannah River

Energy Technology Data Exchange (ETDEWEB)

Klein, J.E., E-mail: james.klein@srnl.doe.gov; Wilson, J.; Heroux, K.J.; Poore, A.S.; Babineau, D.W.

2016-11-01

Highlights: • La-Ni-Al alloys are used as tritium storage materials and retain He-3. • La-Ni-Al He-3 effects decrease useable process tritium inventory. • Use of Pd or depleted uranium beds decreases process tritium inventories. • Reduced inventory tritium facilities will lower public risk. - Abstract: Large quantities of tritium are stored and processed at the Savannah River Site (SRS) Tritium Facilities. In many design basis accidents (DBAs), it is assumed the entire tritium inventory of the in-process vessels are released from the facility and the site for inclusion in public radiological dose calculations. Pending changes in public dose calculation methodologies are driving the need for smaller in-process tritium inventories to be released during DBAs. Reducing the in-process tritium inventory will reduce the unmitigated source term for public dose calculations and will also reduce the production demand for a lower inventory process. This paper discusses process design options to reduce in-process tritium inventories. A Baseline process is defined to illustrate the impact of removing or replacing La-Ni-Al alloy tritium storage beds with palladium (Pd) or depleted uranium (DU) storage beds on facility in-process tritium inventories. Elimination of La-Ni-Al alloy tritium storage beds can reduce in-process tritium inventories by over 1.5 kg, but alternate process technologies may needed to replace some functions of the removed beds.

Design options to minimize tritium inventories at Savannah River

International Nuclear Information System (INIS)

Klein, J.E.; Wilson, J.; Heroux, K.J.; Poore, A.S.; Babineau, D.W.

2016-01-01

Highlights: • La-Ni-Al alloys are used as tritium storage materials and retain He-3. • La-Ni-Al He-3 effects decrease useable process tritium inventory. • Use of Pd or depleted uranium beds decreases process tritium inventories. • Reduced inventory tritium facilities will lower public risk. - Abstract: Large quantities of tritium are stored and processed at the Savannah River Site (SRS) Tritium Facilities. In many design basis accidents (DBAs), it is assumed the entire tritium inventory of the in-process vessels are released from the facility and the site for inclusion in public radiological dose calculations. Pending changes in public dose calculation methodologies are driving the need for smaller in-process tritium inventories to be released during DBAs. Reducing the in-process tritium inventory will reduce the unmitigated source term for public dose calculations and will also reduce the production demand for a lower inventory process. This paper discusses process design options to reduce in-process tritium inventories. A Baseline process is defined to illustrate the impact of removing or replacing La-Ni-Al alloy tritium storage beds with palladium (Pd) or depleted uranium (DU) storage beds on facility in-process tritium inventories. Elimination of La-Ni-Al alloy tritium storage beds can reduce in-process tritium inventories by over 1.5 kg, but alternate process technologies may needed to replace some functions of the removed beds.

Radionuclide release calculations for SAR-08

International Nuclear Information System (INIS)

Thomson, Gavin; Miller, Alex; Smith, Graham; Jackson, Duncan

2008-04-01

Following a review by the Swedish regulatory authorities of the post-closure safety assessment of the SFR 1 disposal facility for low and intermediate waste (L/ILW), SAFE, the SKB has prepared an updated assessment called SAR-08. This report describes the radionuclide release calculations that have been undertaken as part of SAR-08. The information, assumptions and data used in the calculations are reported and the results are presented. The calculations address issues raised in the regulatory review, but also take account of new information including revised inventory data. The scenarios considered include the main case of expected behaviour of the system, with variants; low probability releases, and so-called residual scenarios. Apart from these scenario uncertainties, data uncertainties have been examined using a probabilistic approach. Calculations have been made using the AMBER software. This allows all the component features of the assessment model to be included in one place. AMBER has been previously used to reproduce results the corresponding calculations in the SAFE assessment. It is also used in demonstration of the IAEA's near surface disposal assessment methodology ISAM and has been subject to very substantial verification tests and has been used in verifying other assessment codes. Results are presented as a function of time for the release of radionuclides from the near field, and then from the far field into the biosphere. Radiological impacts of the releases are reported elsewhere. Consideration is given to each radionuclide and to each component part of the repository. The releases from the entire repository are also presented. The peak releases rates are, for most scenarios, due to organic C-14. Other radionuclides which contribute to peak release rates include inorganic C-14, Ni-59 and Ni-63. (author)

Radionuclide release calculations for SAR-08

Energy Technology Data Exchange (ETDEWEB)

Thomson, Gavin; Miller, Alex; Smith, Graham; Jackson, Duncan (Enviros Consulting Ltd, Wolverhampton (United Kingdom))

2008-04-15

Following a review by the Swedish regulatory authorities of the post-closure safety assessment of the SFR 1 disposal facility for low and intermediate waste (L/ILW), SAFE, the SKB has prepared an updated assessment called SAR-08. This report describes the radionuclide release calculations that have been undertaken as part of SAR-08. The information, assumptions and data used in the calculations are reported and the results are presented. The calculations address issues raised in the regulatory review, but also take account of new information including revised inventory data. The scenarios considered include the main case of expected behaviour of the system, with variants; low probability releases, and so-called residual scenarios. Apart from these scenario uncertainties, data uncertainties have been examined using a probabilistic approach. Calculations have been made using the AMBER software. This allows all the component features of the assessment model to be included in one place. AMBER has been previously used to reproduce results the corresponding calculations in the SAFE assessment. It is also used in demonstration of the IAEA's near surface disposal assessment methodology ISAM and has been subject to very substantial verification tests and has been used in verifying other assessment codes. Results are presented as a function of time for the release of radionuclides from the near field, and then from the far field into the biosphere. Radiological impacts of the releases are reported elsewhere. Consideration is given to each radionuclide and to each component part of the repository. The releases from the entire repository are also presented. The peak releases rates are, for most scenarios, due to organic C-14. Other radionuclides which contribute to peak release rates include inorganic C-14, Ni-59 and Ni-63. (author)

Superfund and Toxic Release Inventory Sites - MDC_ContaminatedSite

Data.gov (United States)

NSGIC Local Govt | GIS Inventory — A point feature class of open DERM Contaminated sites - see phase code for status of site. Contaminated sites identifies properties where environmental contamination...

Air Emission Inventory for the Idaho National Engineering Laboratory, 1993 emissions report

International Nuclear Information System (INIS)

1994-06-01

This report presents the 1993 update of the Air Emission Inventory for the Idaho National Engineering Laboratory (INEL). The purpose of the Air Emission Inventory is to commence the preparation of the permit to operate application for the INEL, as required by the recently promulgated Title V regulations of the Clean Air Act. The report describes the emission inventory process and all of the sources at the INEL and provides emissions estimates for both mobile and stationary sources

Air Emission Inventory for the Idaho National Engineering Laboratory, 1993 emissions report

Energy Technology Data Exchange (ETDEWEB)

1994-06-01

This report presents the 1993 update of the Air Emission Inventory for the Idaho National Engineering Laboratory (INEL). The purpose of the Air Emission Inventory is to commence the preparation of the permit to operate application for the INEL, as required by the recently promulgated Title V regulations of the Clean Air Act. The report describes the emission inventory process and all of the sources at the INEL and provides emissions estimates for both mobile and stationary sources.

Update on extended release quetiapine fumarate in schizophrenia and bipolar disorders

Directory of Open Access Journals (Sweden)

El-Khalili N

2012-11-01

Full Text Available Nizar El-KhaliliAlpine Clinic, Lafayette, IN, USAAbstract: The atypical antipsychotic quetiapine fumarate is available both as an immediate release (IR and as an extended release (XR formulation allowing flexibility of dosing for individual patients. Approved uses of quetiapine XR include the treatment of schizophrenia (including maintenance therapy for prevention of relapse, the treatment of bipolar disorder (manic and depressive episodes, and the prevention of recurrence in patients with bipolar disorder who respond to quetiapine XR. This narrative review provides an update on quetiapine XR in these indications. The pharmacological profile of quetiapine, including a moderate affinity for dopamine D2 receptors and higher affinity for serotonin 5-hydroxytryptophan (5-HT2A receptors, may explain its broad efficacy and low propensity for extrapyramidal symptoms (EPS. The XR formulation has similar bioavailability but prolonged plasma levels compared with the IR formulation, allowing for less frequent (once-daily dosing. Clinical studies have confirmed the efficacy of quetiapine XR in relieving the acute symptoms of schizophrenia during short-term trials, and reducing the risk for relapse in long-term studies. Direct switching from the IR formulation to the same dose of the XR formulation did not reveal any loss of efficacy or tolerability issues, and switching patients to quetiapine XR from conventional or other atypical antipsychotics (for reasons of insufficient efficacy or tolerability also proved to be beneficial and generally well tolerated. In bipolar disorder, quetiapine XR has also proven effective in relieving acute depressive and manic symptoms. Adverse events with quetiapine XR in patients with either schizophrenia or bipolar disorder are similar to those associated with the IR formulation, the most common being sedation, dry mouth, somnolence, dizziness, and headache. The low propensity for EPS is maintained with the XR formulation

78 FR 13743 - Department of State FY11 Service Contract Inventory

Science.gov (United States)

2013-02-28

... DEPARTMENT OF STATE [Public Notice 8207] Department of State FY11 Service Contract Inventory... Contract Inventory. SUMMARY: The Department of State has publically released its Service Contract Inventory... Act, Public Law 111-117, requires Department of State, and other civilian agencies, to submit an...

77 FR 5614 - Department of State FY11 Service Contract Inventory

Science.gov (United States)

2012-02-03

... DEPARTMENT OF STATE [Public Notice 7785] Department of State FY11 Service Contract Inventory... Contract Inventory. SUMMARY: The Department of State has publically released its Service Contract Inventory.../ . Section 743 of Division C of the FY 2010 Consolidated Appropriations Act, Public Law 111-117, requires...

Grading of Parameters for Urban Tree Inventories by City Officials, Arborists, and Academics Using the Delphi Method

Science.gov (United States)

Östberg, Johan; Delshammar, Tim; Wiström, Björn; Nielsen, Anders Busse

2013-03-01

Tree inventories are expensive to conduct and update, so every inventory carried out must be maximized. However, increasing the number of constituent parameters increases the cost of performing and updating the inventory, illustrating the need for careful parameter selection. This article reports the results of a systematic expert rating of tree inventories aiming to quantify the relative importance of each parameter. Using the Delphi method, panels comprising city officials, arborists, and academics rated a total of 148 parameters. The total mean score, the top ranking parameters, which can serve as a guide for decision-making at practical level and for standardization of tree inventories, were: Scientific name of the tree species and genera, Vitality, Coordinates, Hazard class, and Identification number. The study also examined whether the different responsibilities and usage of urban tree databases among organizations and people engaged in urban tree inventories affected their prioritization. The results revealed noticeable dissimilarities in the ranking of parameters between the panels, underlining the need for collaboration between the research community and those commissioning, administrating, and conducting inventories. Only by applying such a transdisciplinary approach to parameter selection can urban tree inventories be strengthened and made more relevant.

Air emissions inventory for the Idaho National Engineering Laboratory -- 1995 emissions report

International Nuclear Information System (INIS)

1996-06-01

This report presents the 1995 update of the Air Emission Inventory for the Idaho National Engineering Laboratory (INEL). The INEL Air Emission Inventory documents sources and emissions of non-radionuclide pollutants from operations at the INEL. The report describes the emission inventory process and all of the sources at the INEL, and provides non-radionuclide emissions estimates for stationary sources. The air contaminants reported include nitrogen oxides, sulfur oxides, carbon monoxide, volatile organic compounds, particulates, and hazardous air pollutants (HAPs)

Air emissions inventory for the Idaho National Engineering Laboratory -- 1995 emissions report

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-06-01

This report presents the 1995 update of the Air Emission Inventory for the Idaho National Engineering Laboratory (INEL). The INEL Air Emission Inventory documents sources and emissions of non-radionuclide pollutants from operations at the INEL. The report describes the emission inventory process and all of the sources at the INEL, and provides non-radionuclide emissions estimates for stationary sources. The air contaminants reported include nitrogen oxides, sulfur oxides, carbon monoxide, volatile organic compounds, particulates, and hazardous air pollutants (HAPs).

Updating older forest inventory data with a growth model and satellite records to improve the responsiveness and currency of national carbon monitoring

Science.gov (United States)

Healey, S. P.; Zhao, F. R.; McCarter, J. B.; Frescino, T.; Goeking, S.

2017-12-01

International reporting of American forest carbon trends depends upon the Forest Service's nationally consistent network of inventory plots. Plots are measured on a rolling basis over a 5- to 10-year cycle, so estimates related to any variable, including carbon storage, reflect conditions over a 5- to 10-year window. This makes it difficult to identify the carbon impact of discrete events (e.g., a bad fire year; extraction rates related to home-building trends), particularly if the events are recent.We report an approach to make inventory estimates more sensitive to discrete and recent events. We use a growth model (the Forest Vegetation Simulator - FVS) that is maintained by the Forest Service to annually update the tree list for every plot, allowing all plots to contribute to a series of single-year estimates. Satellite imagery from the Landsat platform guides the FVS simulations by providing information about which plots have been disturbed, which are recovering from disturbance, and which are undergoing undisturbed growth. The FVS model is only used to "update" plot tree lists until the next field measurement is made (maximum of 9 years). As a result, predicted changes are usually small and error rates are low. We present a pilot study of this system in Idaho, which has experienced several major fire events in the last decade. Empirical estimates of uncertainty, accounting for both plot sampling error and FVS model error, suggest that this approach greatly increases temporal specificity and sensitivity to discrete events without sacrificing much estimate precision at the level of a US state. This approach has the potential to take better advantage of the Forest Service's rolling plot measurement schedule to report carbon storage in the US, and it offers the basis of a system that might allow near-term, forward-looking analysis of the effects of hypothetical forest disturbance patterns.

76 FR 9399 - Department of State FY10 Service Contract Inventory

Science.gov (United States)

2011-02-17

... DEPARTMENT OF STATE [Public Notice 7321] Department of State FY10 Service Contract Inventory... Contract Inventory. SUMMARY: The Department of State has publically released its Service Contract Inventory for FY10. Section 743 of Division C of the FY 2010 Consolidated Appropriations Act, Public Law 111-117...

Air Emission Inventory for the Idaho National Engineering and Environmental Laboratory - Calendar Year 1999 Emission Report

Energy Technology Data Exchange (ETDEWEB)

Zohner, S.K.

2000-05-30

This report presents the 1999 calendar year update of the Air Emission Inventory for the Idaho National Engineering and Environmental Laboratory (INEEL). The INEEL Air Emission Inventory documents sources and emissions of nonradionuclide pollutants from operations at the INEEL. The report describes the emission inventory process and all of the sources at the INEEL, and provides nonradionuclide emissions estimates for stationary sources.

Air Emission Inventory for the Idaho National Engineering and Environmental Laboratory - Calendar Year 1998 Emissions Report

Energy Technology Data Exchange (ETDEWEB)

S. K. Zohner

1999-10-01

This report presents the 1998 calendar year update of the Air Emission Inventory for the Idaho National Engineering and Environmental Laboratory (INEEL). The INEEL Air Emission Inventory documents sources and emissions of nonradionuclide pollutants from operations at the INEEL. The report describes the emission inventory process and all of the sources at the INEEL, and provides nonradiological emissions estimates for stationary sources.

Quality manual for the Danish greenhouse gas inventory. Version 2

Energy Technology Data Exchange (ETDEWEB)

Nielsen, O.-K.; Plejdrup, M.S.; Winther, M. [and others

2013-02-15

This report outlines the quality work undertaken by the emission inventory group at the Department of Environmental Science, Aarhus University in connection with the preparation and reporting of the Danish greenhouse gas inventory. This report updates and expands on the first version of the quality manual published in 2005. The report fulfils the mandatory requirements for a quality assurance/quality control (QA/QC) plan as lined out in the UNFCCC reporting guidelines and the specifications related to reporting under the Kyoto Protocol. The report describes all elements of the internal QC procedures as well as the QA and verification activities carried out in connection with the Danish greenhouse gas inventory. (Author)

Tritium transport and release from lithium ceramic breeder materials

International Nuclear Information System (INIS)

Johnson, C.E.; Kopasz, J.P.; Tam, S.W.

1994-01-01

In an operating fusion reactor,, the tritium breeding blanket will reach a condition in which the tritium release rate equals the production rate. The tritium release rate must be fast enough that the tritium inventory in the blanket does not become excessive. Slow tritium release will result in a large tritium inventory, which is unacceptable from both economic and safety viewpoints As a consequence, considerable effort has been devoted to understanding the tritium release mechanism from ceramic breeders and beryllium neutron multipliers through theoretical, laboratory, and in-reactor studies. This information is being applied to the development of models for predicting tritium release for various blanket operating conditions

Updating stand-level forest inventories using airborne laser scanning and Landsat time series data

Science.gov (United States)

Bolton, Douglas K.; White, Joanne C.; Wulder, Michael A.; Coops, Nicholas C.; Hermosilla, Txomin; Yuan, Xiaoping

2018-04-01

opportunity to update estimates of forest attributes in areas where inventory information is either out of date or non-existent.

Invasive plants found in east Texas forests, 2009 forest inventory and analysis factsheet

Science.gov (United States)

Sonja N. Oswalt; Christopher M. Oswalt

2011-01-01

This science update provides information on the presence and cover of nonnative invasive plants found in forests of the eastern region of the State of Texas based on an annual inventory conducted by the Forest Inventory and Analysis (FIA) Program at the Southern Research Station of the U.S. Department of Agriculture Forest Service in cooperation with the Texas Forest...

User Instructions for the Systems Assessment Capability, Rev. 0, Computer Codes Volume 1: Inventory, Release, and Transport Modules

International Nuclear Information System (INIS)

Eslinger, Paul W.; Engel, David W.; Gerhardstein, Lawrence H.; Lopresti, Charles A.; Nichols, William E.; Strenge, Dennis L.

2001-12-01

One activity of the Department of Energy's Groundwater/Vadose Zone Integration Project is an assessment of cumulative impacts from Hanford Site wastes on the subsurface environment and the Columbia River. Through the application of a system assessment capability (SAC), decisions for each cleanup and disposal action will be able to take into account the composite effect of other cleanup and disposal actions. The SAC has developed a suite of computer programs to simulate the migration of contaminants (analytes) present on the Hanford Site and to assess the potential impacts of the analytes, including dose to humans, socio-cultural impacts, economic impacts, and ecological impacts. The general approach to handling uncertainty in the SAC computer codes is a Monte Carlo approach. Conceptually, one generates a value for every stochastic parameter in the code (the entire sequence of modules from inventory through transport and impacts) and then executes the simulation, obtaining an output value, or result. This document provides user instructions for the SAC codes that handle inventory tracking, release of contaminants to the environment, and transport of contaminants through the unsaturated zone, saturated zone, and the Columbia River

Implementation of the Facility Integrated Inventory Computer System (FICS)

International Nuclear Information System (INIS)

McEvers, J.A.; Krichinsky, A.M.; Layman, L.R.; Dunnigan, T.H.; Tuft, R.M.; Murray, W.P.

1980-01-01

This paper describes a computer system which has been developed for nuclear material accountability and implemented in an active radiochemical processing plant involving remote operations. The system posesses the following features: comprehensive, timely records of the location and quantities of special nuclear materials; automatically updated book inventory files on the plant and sub-plant levels of detail; material transfer coordination and cataloging; automatic inventory estimation; sample transaction coordination and cataloging; automatic on-line volume determination, limit checking, and alarming; extensive information retrieval capabilities; and terminal access and application software monitoring and logging

An Improved Inventory Control Model for the Brazilian Navy Supply System

Science.gov (United States)

2001-12-01

Portuguese Centro de Controle de Inventario da Marinha, the Brazilian Navy Inventory Control Point (ICP) developed an empirical model called SPAADA...NAVAL POSTGRADUATE SCHOOL Monterey, California THESIS Approved for public release; distribution is unlimited AN IMPROVED INVENTORY CONTROL ...AN IMPROVED INVENTORY CONTROL MODEL FOR THE BRAZILIAN NAVY SUPPLY SYSTEM Contract Number Grant Number Program Element Number Author(s) Moreira

Updated US and Canadian normalization factors for TRACI 2.1

DEFF Research Database (Denmark)

Ryberg, Morten; Vieira, Marisa D. M.; Zgola, Melissa

2014-01-01

When LCA practitioners perform LCAs, the interpretation of the results can be difficult without a reference point to benchmark the results. Hence, normalization factors are important for relating results to a common reference. The main purpose of this paper was to update the normalization factors...... for the US and US-Canadian regions. The normalization factors were used for highlighting the most contributing substances, thereby enabling practitioners to put more focus on important substances, when compiling the inventory, as well as providing them with normalization factors reflecting the actual...... situation. Normalization factors were calculated using characterization factors from the TRACI 2.1 LCIA model. The inventory was based on US databases on emissions of substances. The Canadian inventory was based on a previous inventory with 2005 as reference, in this inventory the most significant...

Effects of control technology on the projected krypton-85 environmental inventory

International Nuclear Information System (INIS)

Oscarson, E.E.

1973-01-01

Growth projections for the USA nuclear power industry may be used to make projections of future radioactive material inventories available for potential release to the environment. Since krypton-85 is produced in reactors, the potential routes of release to the environment are at the reactors or the fuel reprocessing plants. The present generation of reactors and fuel reprocessing plants do not use any systems to limit the release of krypton-85 into the biosphere. Clean-up systems are currently being designed and could be introduced when necessary. The cumulative inventory of krypton-85 in the environment is dependent upon the time of introduction of these clean-up systems and their efficiencies, in addition to the total quantity produced. Annual and cumulative inventories of krypton-85 are projected to increase dramatically over the next 50 years. If controls are assumed to be initiated at various years, a series of graphs of different cumulative environmental inventories and the associated doses and health effects are drawn. Varying the year of introduction and the efficiency of these systems allows one to speculate as to the optimum time for control implementation

Combined Log Inventory and Process Simulation Models for the Planning and Control of Sawmill Operations

Science.gov (United States)

Guillermo A. Mendoza; Roger J. Meimban; Philip A. Araman; William G. Luppold

1991-01-01

A log inventory model and a real-time hardwood process simulation model were developed and combined into an integrated production planning and control system for hardwood sawmills. The log inventory model was designed to monitor and periodically update the status of the logs in the log yard. The process simulation model was designed to estimate various sawmill...

Preliminary tank characterization report for single-shell tank 241-TX-111: Best-basis inventory

International Nuclear Information System (INIS)

Place, D.E.

1997-01-01

An effort is underway to provide waste inventory estimates that will serve as standard characterization source terms for the various waste management activities. As part of this effort, an evaluation of available information for single-shell tank 241-TX-111 was performed, and a best-basis inventory was established. This work follows the methodology that was established by the standard inventory task. The best-basis inventory is based on an engineering assessment of waste type, process flowsheet data, early sample data, and/or other available information. The Standard Inventories of Chemicals and Radionuclides in Hanford Site Tank Wastes (Kupfer et al. 1997) describes standard methodology used to derive the tank-by-tank best-basis inventories. This preliminary TCR will be updated using this same methodology when additional data on tank contents become available

Preliminary tank characterization report for single-shell tank 241-TX-103: Best-basis inventory

International Nuclear Information System (INIS)

Hendrickson, D.W.

1997-01-01

An effort is underway to provide waste inventory estimates that will serve as standard characterization source terms for the various waste management activities. As part of this effort, an evaluation of available information for single-shell tank 241-TX-103 was performed, and a best-basis inventory was established. This work follows the methodology that was established by the standard inventory task. The best-basis inventory is based on an engineering assessment of waste type, process flowsheet data, early sample data, and/or other available information. The Standard Inventories of Chemicals and Radionuclides in Hanford Site Tank Wastes (Kupfer et al. 1997) describes standard methodology used to derive the tank-by-tank best-basis inventories. This preliminary TCR will be updated using this same methodology when additional data on tank contents become available

Preliminary tank characterization report for single-shell tank 241-TX-101: best-basis inventory

International Nuclear Information System (INIS)

Kupfer, M.J.

1997-01-01

This document is a preliminary Tank Characterization Report (TCR). It only contains the current best-basis inventory (Appendix D) for single-shell tank 241-TX-101. No TCRs have been previously issued for this tank, and current core sample analyses are not available. The best-basis inventory, therefore, is based on an engineering assessment of waste type, process flowsheet data, early sample data, and/or other available information. The Standard Inventories of Chemicals and Radionuclides in Hanford Site Tank Wastes describes standard methodology used to derive the tank-by-tank best-basis inventories. This preliminary TCR will be updated using this same methodology when additional data on tank contents become available

Preliminary tank characterization report for single-shell tank 241-TY-102: best-basis inventory

International Nuclear Information System (INIS)

Place, D.E.

1997-01-01

This document is a preliminary Tank Characterization Report (TCR). It only contains the current best-basis inventory (Appendix D) for single-shell tank 241-TY-102. No TCRs have been previously issued for this tank, and current core sample analyses are not available. The best-basis inventory, therefore, is based on an engineering assessment of waste type, process flowsheet data, early sample data, and/or other available information. The Standard Inventories of Chemicals and Radionuclides in Hanford Site Tank Wastes describes standard methodology used to derive the tank-by-tank best-basis inventories. This preliminary TCR will be updated using this same methodology when additional data on tank contents become available

Preliminary tank characterization report for single-shell tank 241-TX-113: best-basis inventory

International Nuclear Information System (INIS)

Place, D.E.

1997-01-01

This document is a preliminary Tank Characterization Report (TCR). It only contains the current best-basis inventory (Appendix D) for single-shell tank 241-TX-113. No TCRs have been previously issued for this tank, and current core sample analyses are not available. The best-basis inventory, therefore, is based on an engineering assessment of waste type, process flowsheet data, early sample data, and/or other available information. The Standard Inventories of Chemicals and Radionuclides in Hanford Site Tank Wastes describes standard methodology used to derive the tank-by-tank best-basis inventories. This preliminary TCR will be updated using this same methodology when additional data on tank contents become available

Kalman filter to update forest cover estimates

Science.gov (United States)

Raymond L. Czaplewski

1990-01-01

The Kalman filter is a statistical estimator that combines a time-series of independent estimates, using a prediction model that describes expected changes in the state of a system over time. An expensive inventory can be updated using model predictions that are adjusted with more recent, but less expensive and precise, monitoring data. The concepts of the Kalman...

Tritium inventory prediction in a CANDU plant

International Nuclear Information System (INIS)

Song, M.J.; Son, S.H.; Jang, C.H.

1995-01-01

The flow of tritium in a CANDU nuclear power plant was modeled to predict tritium activity build-up. Predictions were generally in good agreement with field measurements for the period 1983--1994. Fractional contributions of coolant and moderator systems to the environmental tritium release were calculated by least square analysis using field data from the Wolsong plant. From the analysis, it was found that: (1) about 94% of tritiated heavy water loss came from the coolant system; (2) however, about 64% of environmental tritium release came from the moderator system. Predictions of environmental tritium release were also in good agreement with field data from a few other CANDU plants. The model was used to calculate future tritium build-up and environmental tritium release at Wolsong site, Korea, where one unit is operating and three more units are under construction. The model predicts the tritium inventory at Wolsong site to increase steadily until it reaches the maximum of 66.3 MCi in the year 2026. The model also predicts the tritium release rate to reach a maximum of 79 KCi/yr in the year 2012. To reduce the tritium inventory at Wolsong site, construction of a tritium removal facility (TRF) is under consideration. The maximum needed TRF capacity of 8.7 MCi/yr was calculated to maintain tritium concentration effectively in CANDU reactors

A description of the reactor inventory module NECTAR-RICE

International Nuclear Information System (INIS)

Nair, S.

1984-06-01

This note describes the NECTAR-RICE module of the CEGB's NECTAR environmental code, which can be used to calculate the actinide and/or fission product inventories of irradiated nuclear fuel used as input to the calculation of the release source term to atmosphere for accidental releases. The range of actinide and fission product nuclides considered is large enough to permit studies to be made for virtually any irradiation history consisting of ad hoc combinations of irradiation and cooling periods. The actinide and fission product inventories are calculated for burnup periods using numerical methods best suited to this problem, while analytical solutions are used for cooling periods. The code can be used to perform a coupled actinide-fission product calculation, a solely actinide calculation or a solely fission product calculation. Output consists of inventories, activities, and γ spectra, among others. A brief description is also given of previous work in this field. (author)

HALL project. Justifying synthesis of the dimensioning inventory model

International Nuclear Information System (INIS)

Lagrange, M.H.

2003-01-01

This document explains the input data and the hypotheses retained for the establishment of the dimensioning inventory model (DIM). It recalls, first, the scenarios considered for the spent fuel and reprocessing management, describes the updating of the list of families of high-activity and long living (HALL) waste packages and the hypotheses considered for their quantifying in the inventory model. It presents also the selection criteria of type-packages and the list of such packages. It precises the regrouping of package families into type-packages and the related quantitative data. Finally, it details the modalities of preparation of radiological and chemical description of type-packages. (J.S.)

Updated SO2 emission estimates over China using OMI/Aura observations

Science.gov (United States)

Elissavet Koukouli, Maria; Theys, Nicolas; Ding, Jieying; Zyrichidou, Irene; Mijling, Bas; Balis, Dimitrios; van der A, Ronald Johannes

2018-03-01

The main aim of this paper is to update existing sulfur dioxide (SO2) emission inventories over China using modern inversion techniques, state-of-the-art chemistry transport modelling (CTM) and satellite observations of SO2. Within the framework of the EU Seventh Framework Programme (FP7) MarcoPolo (Monitoring and Assessment of Regional air quality in China using space Observations) project, a new SO2 emission inventory over China was calculated using the CHIMERE v2013b CTM simulations, 10 years of Ozone Monitoring Instrument (OMI)/Aura total SO2 columns and the pre-existing Multi-resolution Emission Inventory for China (MEIC v1.2). It is shown that including satellite observations in the calculations increases the current bottom-up MEIC inventory emissions for the entire domain studied (15-55° N, 102-132° E) from 26.30 to 32.60 Tg annum-1, with positive updates which are stronger in winter ( ˜ 36 % increase). New source areas were identified in the southwest (25-35° N, 100-110° E) as well as in the northeast (40-50° N, 120-130° E) of the domain studied as high SO2 levels were observed by OMI, resulting in increased emissions in the a posteriori inventory that do not appear in the original MEIC v1.2 dataset. Comparisons with the independent Emissions Database for Global Atmospheric Research, EDGAR v4.3.1, show a satisfying agreement since the EDGAR 2010 bottom-up database provides 33.30 Tg annum-1 of SO2 emissions. When studying the entire OMI/Aura time period (2005 to 2015), it was shown that the SO2 emissions remain nearly constant before the year 2010, with a drift of -0.51 ± 0.38 Tg annum-1, and show a statistically significant decline after the year 2010 of -1.64 ± 0.37 Tg annum-1 for the entire domain. Similar findings were obtained when focusing on the greater Beijing area (30-40° N, 110-120° E) with pre-2010 drifts of -0.17 ± 0.14 and post-2010 drifts of -0.47 ± 0.12 Tg annum-1. The new SO2 emission inventory is publicly available and forms

Measurement of the gap and grain boundary inventories of Cs, Sr and I in domestic used PWR fuels

International Nuclear Information System (INIS)

Kim, S. S.; Choi, J. W.; Seo, H. S.; Cho, W. J.; Kang, K. C.; Kwon, S. H.

2007-01-01

Inventories of soluble elements in the gap and grain boundaries of domestic used PWR fuel pellets were measured to estimate the quantities of radionuclides that are liable to be rapidly released into the groundwater of a disposal site. The gap inventory of cesium for the pellets in the used fuel with a burn-up range of 45 to 66 GWD/MTU showed 0.85 to 1.7% of its total inventory, which was close to 1/6 to 1/3 of the fission gas release fraction (FGRF). However, the amounts of cesium released from the gaps of the pellets below 40 GWD/MTU of a burn-up and less than 1% FGRF were so erratic that the gap inventory could not be defined by its FGRF. Strontium inventories in the gap and grain boundaries of the pellets in the same rod were not significantly varied, and the iodine inventory in the gap of the used PWR fuels was estimated to be less than or the same as the FGRF

Quantitative Analysis of Kr-85 Fission Gas Release from Dry Process for the Treatment of Spent PWR Fuel

International Nuclear Information System (INIS)

Park, Geun Il; Cho, Kwang Hun; Lee, Dou Youn; Lee, Jung Won; Park, Jang Jin; Song, Kee Chan

2007-01-01

As spent UO 2 fuel oxidizes to U 3 O 8 by air oxidation, a corresponding volume expansion separate grains, releasing the grain-boundary inventory of fission gases. Fission products in spent UO 2 fuel can be distributed in three major regions : the inventory in fuel-sheath gap, the inventory on grain boundaries and the inventory in UO 2 matrix. Release characteristic of fission gases depends on its distribution amount in three regions as well as spent fuel burn-up. Oxidation experiments of spent fuel at 500 .deg. C gives the information of fission gases inventory in spent fuel, and further annealing experiments at higher temperature produces matrix inventory of fission gases on segregated grain. In previous study, fractional release characteristics of Kr- 85 during OREOX (Oxidation and REduction of Oxide fuel) treatment as principal key process for recycling spent PWR fuel via DUPIC cycle have already evaluated as a function of fuel burn-up with 27.3, 35 and 65 MWd/tU. In this paper, new release experiment results of Kr-85 using spent fuel with burn- up of 58 GWd/tU are included to evaluate the fission gas release behavior. As a point of summary in fission gases release behavior, the quantitative analysis of Kr- 85 release characteristics from various spent fuels with different burn-up during voloxidation and OREOX process were reviewed

Inventory of Engineered Nanoparticle-Containing Consumer Products Available in the Singapore Retail Market and Likelihood of Release into the Aquatic Environment.

Science.gov (United States)

Zhang, Yuanyuan; Leu, Yu-Rui; Aitken, Robert J; Riediker, Michael

2015-07-24

Consumer products containing engineered nanoparticles (ENP) are already entering the marketplace. This leads, inter alia, to questions about the potential for release of ENP into the environment from commercial products. We have inventoried the prevalence of ENP-containing consumer products in the Singapore market by carrying out onsite assessments of products sold in all major chains of retail and cosmetic stores. We have assessed their usage patterns and estimated release factors and emission quantities to obtain a better understanding of the quantities of ENP that are released into which compartments of the aquatic environment in Singapore. Products investigated were assessed for their likelihood to contain ENP based on the declaration of ENP by producers, feature descriptions, and the information on particle size from the literature. Among the 1,432 products investigated, 138 were "confirmed" and 293 were "likely" to contain ENP. Product categories included sunscreens, cosmetics, health and fitness, automotive, food, home and garden, clothing and footwear, and eyeglass/lens coatings. Among the 27 different types of nanomaterials identified, SiO2 was predominant, followed by TiO2 and ZnO, Carbon Black, Ag, and Au. The amounts of ENP released into the aquatic system, which was estimated on the basis of typical product use, ENP concentration in the product, daily use quantity, release factor, and market share, were in the range of several hundred tons per year. As these quantities are likely to increase, it will be important to further study the fate of ENP that reach the aquatic environment in Singapore.

Inventory of Engineered Nanoparticle-Containing Consumer Products Available in the Singapore Retail Market and Likelihood of Release into the Aquatic Environment

Directory of Open Access Journals (Sweden)

Yuanyuan Zhang

2015-07-01

Full Text Available Consumer products containing engineered nanoparticles (ENP are already entering the marketplace. This leads, inter alia, to questions about the potential for release of ENP into the environment from commercial products. We have inventoried the prevalence of ENP-containing consumer products in the Singapore market by carrying out onsite assessments of products sold in all major chains of retail and cosmetic stores. We have assessed their usage patterns and estimated release factors and emission quantities to obtain a better understanding of the quantities of ENP that are released into which compartments of the aquatic environment in Singapore. Products investigated were assessed for their likelihood to contain ENP based on the declaration of ENP by producers, feature descriptions, and the information on particle size from the literature. Among the 1,432 products investigated, 138 were “confirmed” and 293 were “likely” to contain ENP. Product categories included sunscreens, cosmetics, health and fitness, automotive, food, home and garden, clothing and footwear, and eyeglass/lens coatings. Among the 27 different types of nanomaterials identified, SiO2 was predominant, followed by TiO2 and ZnO, Carbon Black, Ag, and Au. The amounts of ENP released into the aquatic system, which was estimated on the basis of typical product use, ENP concentration in the product, daily use quantity, release factor, and market share, were in the range of several hundred tons per year. As these quantities are likely to increase, it will be important to further study the fate of ENP that reach the aquatic environment in Singapore.

National Solar Radiation Database 1991-2005 Update: User's Manual

Energy Technology Data Exchange (ETDEWEB)

Wilcox, S.

2007-04-01

This manual describes how to obtain and interpret the data products from the updated 1991-2005 National Solar Radiation Database (NSRDB). This is an update of the original 1961-1990 NSRDB released in 1992.

Update History of This Database - DMPD | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available switchLanguage; BLAST Search Image Search Home About Archive Update History Data ...List Contact us DMPD Update History of This Database Date Update contents 2010/03/29 DMPD English archive si....jp/macrophage/ ) is released. About This Database Database Description Download License Update History of Thi...s Database Site Policy | Contact Us Update History of This Database - DMPD | LSDB Archive ...

The new Inventory of Italian Glaciers: Present knowledge, applied methods and preliminary results

Science.gov (United States)

Smiraglia, Claudio; Diolaiuti, Guglielmina; D'Agata, Carlo; Maragno, Davide; Baroni, Carlo; Mortara, Gianni; Perotti, Luigi; Bondesan, Aldino; Salvatore, Cristina; Vagliasindi, Marco; Vuillermoz, Elisa

2013-04-01

A new Glacier Inventory is an indispensable requirement in Italy due to the importance of evaluating the present glacier coverage and the recent changes driven by climate. Furthermore Alpine glaciers represent a not negligible water and touristic resource then to manage and promote them is needed to know their distribution, size and features. The first Italian Glacier Inventory dates back to 1959-1962. It was compiled by the Italian Glaciological Committee (CGI) in cooperation with the National Research Council (CNR); this first inventory was mainly based on field data coupled with photographs (acquired on the field) and high resolution maps. The Italian glaciation resulted to be spread into 754 ice bodies which altogether were covering 525 km2. Moreover in the Eighties a new inventory was compiled to insert Italian data into the World Glacier Inventory (WGI); aerial photos taken at the end of the Seventies (and in some cases affected by a high and not negligible snow coverage) were used as the main source of data. No other national inventory were compiled after that period. Nevertheless during the last decade the largest part of the Italian Alpine regions have produced regional and local glacier inventories which in several cases are also available and queried through web sites and web GIS application. The actual need is now to obtain a complete, homogeneous and contemporary picture of the Italian Glaciation which encompasses the already available regional and local data and all the new updated information coming from new sources of data (e.g.: orthophotos, satellite imagines, etc..). The challenge was accepted by the University of Milan, the EvK2CNR Committee and the Italian Glaciological Committee who, with the sponsorship of Levissima Spa, are presently working to compile the new updated Italian Glacier Inventory. The first project step is to produce a unique homogeneous glacier database including glacier boundary and surface area and the main fundamental

Consequences of severe radioactive releases to Nordic Marine environment

DEFF Research Database (Denmark)

Iosjpe, M.; Isaksson, M.; Joensen, H.P.

- or minor – radioactive releases to Nordic marine environment. As a reference, the release amounts from a 3000 MWth reactor size were used. Based on source term analyses, the chosen release fractions in the study were: iodine 20% (of the total core inventory), caesium 10%, tellurium 10%, strontium 0...

Second update The Gordon Bell Competition entry gb110s2

International Nuclear Information System (INIS)

Vranas, P; Soltz, R

2006-01-01

Since the update to our entry of October 20th we have just made a significant improvement. We understand that this is past the deadline for updates and very close to the conference date. However, Lawrence Livermore National Laboratory has just updated the BG/L system software on their full 64 BG/L supercomputer to IBM-BGL Release 3. As we discussed in our update of October 20 this release includes our custom L1 and SRAM access functions that allow us to achieve higher sustained performance. Just a few hours ago we got access to the full system and obtained the fastest sustained performance point. In the full 131,072 CPU-cores system QCD sustains 70.9 Teraflops for the Dirac operator and 67.9 teraflops for the full Conjugate Gradient inverter. This is about 20% faster than our last update. We attach the corresponding speedup figure. As you can tell the speedup is perfect. This figure is the same as Figure 1 of our October 20th update except that it now includes the 131,072 CPU-cores point

Summary of Expansions, Updates, and Results in GREET 2017 Suite of Models

Energy Technology Data Exchange (ETDEWEB)

Wang, Michael [Argonne National Lab. (ANL), Argonne, IL (United States); Elgowainy, Amgad [Argonne National Lab. (ANL), Argonne, IL (United States); Han, Jeongwoo [Argonne National Lab. (ANL), Argonne, IL (United States); Benavides, Pahola Thathiana [Argonne National Lab. (ANL), Argonne, IL (United States); Burnham, Andrew [Argonne National Lab. (ANL), Argonne, IL (United States); Cai, Hao [Argonne National Lab. (ANL), Argonne, IL (United States); Canter, Christina [Argonne National Lab. (ANL), Argonne, IL (United States); Chen, Rui [Argonne National Lab. (ANL), Argonne, IL (United States); Dai, Qiang [Argonne National Lab. (ANL), Argonne, IL (United States); Kelly, Jarod [Argonne National Lab. (ANL), Argonne, IL (United States); Lee, Dong-Yeon [Argonne National Lab. (ANL), Argonne, IL (United States); Lee, Uisung [Argonne National Lab. (ANL), Argonne, IL (United States); Li, Qianfeng [Argonne National Lab. (ANL), Argonne, IL (United States); Lu, Zifeng [Argonne National Lab. (ANL), Argonne, IL (United States); Qin, Zhangcai [Argonne National Lab. (ANL), Argonne, IL (United States); Sun, Pingping [Argonne National Lab. (ANL), Argonne, IL (United States); Supekar, Sarang D. [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-11-01

This report provides a technical summary of the expansions and updates to the 2017 release of Argonne National Laboratory’s Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET®) model, including references and links to key technical documents related to these expansions and updates. The GREET 2017 release includes an updated version of the GREET1 (the fuel-cycle GREET model) and GREET2 (the vehicle-cycle GREET model), both in the Microsoft Excel platform and in the GREET.net modeling platform. Figure 1 shows the structure of the GREET Excel modeling platform. The .net platform integrates all GREET modules together seamlessly.

Nevada National Security Site Underground Radionuclide Inventory, 1951-1992: Accounting for Radionuclide Decay through September 30, 2012

Energy Technology Data Exchange (ETDEWEB)

Finnegan, David Lawrence [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bowen, Scott Michael [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Thompson, Joseph L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Miller, Charles M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Baca, Phyllis L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Olivas, Loretta F. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Geoffrion, Carmen G. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Smith, David K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Goishi, Wataru [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Esser, Bradley K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meadows, Jesse W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Namboodiri, Neil [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wild, John F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-03-16

This report is an update of report LA-13859-MS (Bowen et al., 2001). In that original report, the underground radionuclide inventory at the Nevada National Security Site (NNSS) was decay corrected to September 23, 1992, the date of the last underground nuclear test at the NNSS. In this report, the inventory is updated to account for the decay of radionuclides over two additional decades (1992-2012) and revised tritium, fission product and actinide inventory figures and tables are presented. The maximum contaminant levels for radionuclides were also updated to Safe Drinking Water Act Maximum Contaminant Levels (MCLs) (CFR, 2013). Also, a number of minor errata found in the original publication were corrected. An inventory of radionuclides produced by 828 underground nuclear tests conducted at the NNSS by the Lawrence Livermore National Laboratory, the Los Alamos National Laboratory, and the Department of the Defense from 1951 to 1992 includes tritium, fission products, actinides, and activation products. The inventory presented in this report provides an estimate of radioactivity remaining underground at the NNSS after nuclear testing. The original test inventory is decayed to September 30, 2012, and predictions of inventory decay over the subsequent 1000 years are presented. For the purposes of summary and publication, the Los Alamos National Laboratory and Lawrence Livermore National Laboratory authors of this report subdivided the inventory into five areas corresponding to the principal geographic test centers at the NNSS. The five areas roughly correspond to Underground Test Area “Corrective Action Units” (CAUs) for remediation of groundwater. In addition, the inventory is further subdivided for the Yucca Flat region by tests where the working point depth is more than 328 feet (100 meters) above the water table and tests that were detonated below that level. Water levels used were those from the U. S. Department of Energy, Nevada Operations Office (1997

From Neurons to Neighborhoods: An Update--Workshop Summary

Science.gov (United States)

Olson, Steve

2012-01-01

"From Neurons to Neighborhoods: An Update: Workshop Summary" is based on the original study "From Neurons to Neighborhoods: Early Childhood Development," which was released in October of 2000. From the time of the original publication's release, much has occurred to cause a fundamental reexamination of the nation's…

Summary of Expansions, Updates, and Results in GREET® 2016 Suite of Models

Energy Technology Data Exchange (ETDEWEB)

None, None

2016-10-01

This report documents the technical content of the expansions and updates in Argonne National Laboratory’s GREET® 2016 release and provides references and links to key documents related to these expansions and updates.

Updated SO2 emission estimates over China using OMI/Aura observations

Directory of Open Access Journals (Sweden)

M. E. Koukouli

2018-03-01

Full Text Available The main aim of this paper is to update existing sulfur dioxide (SO2 emission inventories over China using modern inversion techniques, state-of-the-art chemistry transport modelling (CTM and satellite observations of SO2. Within the framework of the EU Seventh Framework Programme (FP7 MarcoPolo (Monitoring and Assessment of Regional air quality in China using space Observations project, a new SO2 emission inventory over China was calculated using the CHIMERE v2013b CTM simulations, 10 years of Ozone Monitoring Instrument (OMI/Aura total SO2 columns and the pre-existing Multi-resolution Emission Inventory for China (MEIC v1.2. It is shown that including satellite observations in the calculations increases the current bottom-up MEIC inventory emissions for the entire domain studied (15–55° N, 102–132° E from 26.30 to 32.60 Tg annum−1, with positive updates which are stronger in winter ( ∼  36 % increase. New source areas were identified in the southwest (25–35° N, 100–110° E as well as in the northeast (40–50° N, 120–130° E of the domain studied as high SO2 levels were observed by OMI, resulting in increased emissions in the a posteriori inventory that do not appear in the original MEIC v1.2 dataset. Comparisons with the independent Emissions Database for Global Atmospheric Research, EDGAR v4.3.1, show a satisfying agreement since the EDGAR 2010 bottom-up database provides 33.30 Tg annum−1 of SO2 emissions. When studying the entire OMI/Aura time period (2005 to 2015, it was shown that the SO2 emissions remain nearly constant before the year 2010, with a drift of −0.51 ± 0.38 Tg annum−1, and show a statistically significant decline after the year 2010 of −1.64 ± 0.37 Tg annum−1 for the entire domain. Similar findings were obtained when focusing on the greater Beijing area (30–40° N, 110–120° E with pre-2010 drifts of −0.17 ± 0.14 and post-2010

COMMERCIAL SNF ACCIDENT RELEASE FRACTIONS

Energy Technology Data Exchange (ETDEWEB)

S.O. Bader

1999-10-18

The purpose of this design analysis is to specify and document the total and respirable fractions for radioactive materials that are released from an accident event at the Monitored Geologic Repository (MGR) involving commercial spent nuclear fuel (CSNF) in a dry environment. The total and respirable release fractions will be used to support the preclosure licensing basis for the MGR. The total release fraction is defined as the fraction of total CSNF assembly inventory, typically expressed as an activity inventory (e.g., curies), of a given radionuclide that is released to the environment from a waste form. The radionuclides are released from the inside of breached fuel rods (or pins) and from the detachment of radioactive material (crud) from the outside surfaces of fuel rods and other components of fuel assemblies. The total release fraction accounts for several mechanisms that tend to retain, retard, or diminish the amount of radionuclides that are available for transport to dose receptors or otherwise can be shown to reduce exposure of receptors to radiological releases. The total release fraction includes a fraction of airborne material that is respirable and could result in inhalation doses. This subset of the total release fraction is referred to as the respirable release fraction. Potential accidents may involve waste forms that are characterized as either bare (unconfined) fuel assemblies or confined fuel assemblies. The confined CSNF assemblies at the MGR are contained in shipping casks, canisters, or disposal containers (waste packages). In contrast to the bare fuel assemblies, the container that confines the fuel assemblies has the potential of providing an additional barrier for diminishing the total release fraction should the fuel rod cladding breach during an accident. However, this analysis will not take credit for this additional bamer and will establish only the total release fractions for bare unconfined CSNF assemblies, which may however be

COMMERCIAL SNF ACCIDENT RELEASE FRACTIONS

International Nuclear Information System (INIS)

S.O. Bader

1999-01-01

The purpose of this design analysis is to specify and document the total and respirable fractions for radioactive materials that are released from an accident event at the Monitored Geologic Repository (MGR) involving commercial spent nuclear fuel (CSNF) in a dry environment. The total and respirable release fractions will be used to support the preclosure licensing basis for the MGR. The total release fraction is defined as the fraction of total CSNF assembly inventory, typically expressed as an activity inventory (e.g., curies), of a given radionuclide that is released to the environment from a waste form. The radionuclides are released from the inside of breached fuel rods (or pins) and from the detachment of radioactive material (crud) from the outside surfaces of fuel rods and other components of fuel assemblies. The total release fraction accounts for several mechanisms that tend to retain, retard, or diminish the amount of radionuclides that are available for transport to dose receptors or otherwise can be shown to reduce exposure of receptors to radiological releases. The total release fraction includes a fraction of airborne material that is respirable and could result in inhalation doses. This subset of the total release fraction is referred to as the respirable release fraction. Potential accidents may involve waste forms that are characterized as either bare (unconfined) fuel assemblies or confined fuel assemblies. The confined CSNF assemblies at the MGR are contained in shipping casks, canisters, or disposal containers (waste packages). In contrast to the bare fuel assemblies, the container that confines the fuel assemblies has the potential of providing an additional barrier for diminishing the total release fraction should the fuel rod cladding breach during an accident. However, this analysis will not take credit for this additional bamer and will establish only the total release fractions for bare unconfined CSNF assemblies, which may however be

Emission inventory: An urban public policy instrument and benchmark

International Nuclear Information System (INIS)

D'Avignon, Alexander; Azevedo Carloni, Flavia; Lebre La Rovere, Emilio; Burle Schmidt Dubeux, Carolina

2010-01-01

Global concern with climate change has led to the development of a variety of solutions to monitor and reduce emissions on both local and global scales. Under the United Nations Framework Convention on Climate Change (UNFCCC), both developed and emerging countries have assumed responsibility for developing and updating national inventories of greenhouse gas emissions from anthropic sources. This creates opportunities and incentives for cities to carry out their own local inventories and, thereby, develop air quality management plans including both essential key players and stakeholders at the local level. The aim of this paper is to discuss the role of local inventories as an urban public policy instrument and how this type of local instrument may bring advantages countrywide in enhancing the global position of a country. Local inventories have been carried out in many cities of the world and the main advantage of this is that it allows an overview of emissions produced by different municipal activities, thereby, helps decision makers in the elaboration of efficient air quality management plans. In that way, measures aimed at the reduction of fossil fuel consumption to lower local atmospheric pollution levels can also, in some ways, reduce GHG emissions.

2002 Toxic Chemical Release Inventory Report for the Emergency Planning and Community Right-to-Know Act of 1986, Title III, Section 313

International Nuclear Information System (INIS)

Stockton, M.

2003-01-01

For reporting year 2002, Los Alamos National Laboratory (LANL or the Laboratory) submitted Form R reports for lead compounds and mercury as required under the Emergency Planning and Community Right-to-Know Act (EPCRA), Section 313. No other EPCRA Section 313 chemicals were used in 2002 above the reportable thresholds. This document was prepared to provide a description of the evaluation of EPCRA Section 313 chemical usage and threshold determinations for LANL for calendar year 2002 as well as provide background information about the data included on the Form R reports. Section 313 of EPCRA specifically requires facilities to submit a Toxic Chemical Release Inventory report (Form R) to the U.S. Environmental Protection Agency (EPA) and state agencies if the owners and operators manufacture, process, or otherwise use any of the listed toxic chemicals above listed threshold quantities. EPA compiles this data in the Toxic Release Inventory database. Form R reports for each chemical over threshold quantities must be submitted on or before July 1 each year and must cover activities that occurred at the facility during the previous year. In 1999 EPA promulgated a final rule on Persistent Bioaccumulative Toxics (PBTs). This rule added several chemicals to the EPCRA Section 313 list of toxic chemicals and established lower reporting thresholds for these and other PBT chemicals that were already reportable under EPCRA Section 313. These lower thresholds became applicable in reporting year 2000. In 2001, EPA expanded the PBT rule to include a lower reporting threshold for lead and lead compounds. Facilities that manufacture, process, or otherwise use more than 100 lb of lead or lead compounds must submit a Form R

2006 Toxic Chemical Release Inventory Report for the Emergency Planning and Community Right-to-Know Act of 1986, Title III, Section 313

Energy Technology Data Exchange (ETDEWEB)

Ecology and Air Quality Group (ENV-EAQ)

2007-12-12

For reporting year 2006, Los Alamos National Laboratory (LANL or the Laboratory) submitted Form R reports for lead as required under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313. No other EPCRA Section 313 chemicals were used in 2006 above the reportable thresholds. This document was prepared to provide a description of the evaluation of EPCRA Section 313 chemical use and threshold determinations for LANL for calendar year 2006, as well as to provide background information about data included on the Form R reports. Section 313 of EPCRA specifically requires facilities to submit a Toxic Chemical Release Inventory Report (Form R) to the U.S. Environmental Protection Agency (EPA) and state agencies if the owners and operators manufacture, process, or otherwise use any of the listed toxic chemicals above listed threshold quantities. EPA compiles this data in the Toxic Release Inventory database. Form R reports for each chemical over threshold quantities must be submitted on or before July 1 each year and must cover activities that occurred at the facility during the previous year. In 1999, EPA promulgated a final rule on persistent bioaccumulative toxics (PBTs). This rule added several chemicals to the EPCRA Section 313 list of toxic chemicals and established lower reporting thresholds for these and other PBT chemicals that were already reportable. These lower thresholds became applicable in reporting year 2000. In 2001, EPA expanded the PBT rule to include a lower reporting threshold for lead and lead compounds. Facilities that manufacture, process, or otherwise use more than 100 lb of lead or lead compounds must submit a Form R.

Global radioxenon emission inventory based on nuclear power reactor reports.

Science.gov (United States)

Kalinowski, Martin B; Tuma, Matthias P

2009-01-01

Atmospheric radioactivity is monitored for the verification of the Comprehensive Nuclear-Test-Ban Treaty, with xenon isotopes 131mXe, 133Xe, 133mXe and 135Xe serving as important indicators of nuclear explosions. The treaty-relevant interpretation of atmospheric concentrations of radioxenon is enhanced by quantifying radioxenon emissions released from civilian facilities. This paper presents the first global radioxenon emission inventory for nuclear power plants, based on North American and European emission reports for the years 1995-2005. Estimations were made for all power plant sites for which emission data were unavailable. According to this inventory, a total of 1.3PBq of radioxenon isotopes are released by nuclear power plants as continuous or pulsed emissions in a generic year.

Low and intermediate level waste in SFR-1. Reference waste inventory

International Nuclear Information System (INIS)

Riggare, P.; Johansson, Claes

2001-06-01

The objective with this report is to describe all the waste and the waste package that is expected to be deposited in SFR-1 at the time of closure. This report is a part of the SAFE project (Safety Assessment of Final Repository for Radioactive Operational Waste), i.e. the renewed safety assessment of SFR-1. The accounted waste inventory has been used as input to the release calculation that has been performed in the SAFE project. The waste inventory is based on an estimated operational lifetime of the Swedish nuclear power plants of 40 years and that closure of the SFR repository will happen in 2030. In the report, data about geometries, weights, materials, chemicals and radionuclide are given. No chemo toxic material has been identified in the waste. The inventory is based on so called waste types and the waste types reference waste package. The reference waste package combined with a prognosis of the number of waste packages to the year 2030 gives the final waste inventory for SFR-1. All reference waste packages are thoroughly described in the appendices of this report. The reference waste packages are as far as possible based on actual experiences and measurements. The radionuclide inventory is also based on actual measurements. The inventory is based on measurements of 60 Co and 137 Cs in waste packages and on measurements 239 Pu and 240 Pu in reactor water. Other nuclides in the inventory are calculated with correlation factors. In the SAFE project's prerequisites it was said that one realistic and one conservative (pessimistic) inventory should be produced. The conservative one should then be used for the release calculations. In this report one realistic and one conservative radionuclide inventory is presented. The conservative one adds up to 10 16 Bq. Regarding materials there is only one inventory given since it is not certain what is a conservative assumption

EPA Releases Update to Popular School Integrated Pest Management Publication

Science.gov (United States)

An updated version reflects recent innovations in school IPM, provides links to new information, and has been redesigned into an easily printable format. It provides an overview of IPM and details the steps a school can follow to establish an IPM program.

A recommended approach to the National Pollutant Release Inventory (NPRI) for the upstream oil and gas industry : 2002 : CAC emissions

International Nuclear Information System (INIS)

2003-04-01

The National Pollutant Release Inventory (NPRI) is a database of annual releases to air, water, land and off-site transfers of 273 specified pollutants. Environment Canada requires that the NPRI be reported annually. Criteria Air Contaminants (CAC) had to be reported for the first time in 2002. Air pollutants that contribute to the formation of ground level ozone and smog are included in the definition of CAC, along with any eye or respiratory irritants to both humans and animals. The substances of special interest to the petroleum industry are: oxides of nitrogen, sulphur dioxide, carbon monoxide, volatile organic compounds, total particulate matter, and particulate matters. This guide is intended to provide member companies of Canadian Association of Petroleum Producers (CAPP), operating upstream oil and gas facilities, with readily available data to determine the amount of CAC emissions released from their processes and equipment. Companies using these guidelines will be able to compare the performance of various upstream oil and gas companies more readily because the data is consistent. The scope of the project was described in section 1, and the sources of CAC emissions were identified in section 2. The reporting threshold was discussed in section 3. Data required for collection was outlined in section 4. Section 5 outlines how CAC emission quantities are determined. Calculation examples were provided in section 6 and definitions provided in section 7. 11 tabs., 1 fig

Releases of radioactivity at the Savannah River Plant, 1954--1975

International Nuclear Information System (INIS)

Ashley, C.; Zeigler, C.C.

1976-07-01

This report contains summaries of releases of radioactivity to the environs from the Savannah River Plant for each year since plant startup (1954-1975). It also contains monthly summaries of 1975 releases from major emission sources (Separations and Reactor Areas). Releases for the years 1954 through 1959 are reassessed and assigned release values for long-lived specific radionuclides. These long-lived radionuclides (half lives greater than one year) are the only radionuclides included for the years 1954 through 1970. Beginning in 1971 all detectable radionuclides are included. The tabulated data, now compiled by computer, will be updated annually. All measured migration of radioactivity from the F- and H-Area seepage basin systems to Four Mile Creek, and from the K-Area containment basin to Pen Branch is listed in the release summaries and will be updated annually

{open_quotes}Just-in-time inventory{close_quotes} proceed with caution!

Energy Technology Data Exchange (ETDEWEB)

Katterhenry, W.E.

1995-08-01

Just when the power generation industry was stabilizing along came mega government regulations and changing economic conditions that threw a monkey wrench into the works. Although improved inventory practices have helped solve some coal problems, other still remain. The Clean Air Act has resulted in fuel switching, blending, equipment changes, and other factors, all contributing to power plant personnel grey hair. Then along came Just-In-Time inventory practices. Not only is the plant required to make all these changes to meet regulatory requirements, but reduce the quantity of fuel in inventory to unheard of low levels. Why is it so difficult to precisely account for coal in inventory? After all, inventory is a simple matter of accurately measuring the coal coming in to the plant, measuring the coal used by the plant, and conducting an accurate physical inventory to measure the remaining coal. Add to this, a major coal inventory reduction policy, when base maps are not maintained or updated and are, therefore, not likely to be accurate. Some coal may have been stored below the prevailing water table, rendering the coal unusable. Weather conditions, such as major ice storms can render much of the coal unburnable. Unless accounted for, these things reduce the perceived amount of coal in inventory. This presentation will address these issues to assist in preventing potential unscheduled plant shut down and the need to purchase unscheduled blocks of emergency power. Just-In-Time Inventory isn`t as straightforward as first meets the eye.

Effects of sorption hysteresis on radionuclide releases from waste packages

International Nuclear Information System (INIS)

Barney, G.S.; Reed, D.T.

1985-01-01

A one-dimensional, numerical transport model was used to calculate radionuclide releases from waste packages emplaced in a nuclear waste repository in basalt. The model incorporates both sorption and desorption isotherm parameters measured previously for sorption of key radionuclides on the packing material component of the waste package. Sorption hysteresis as described by these isotherms lowered releases of some radionuclides by as much as two orders of magnitude. Radionuclides that have low molar inventories (relative to uranium), high solubility, and strongly sorbed, are most affected by sorption hysteresis. In these cases, almost the entire radionuclide inventory is sorbed on the packing material. The model can be used to help optimize the thickness of the packing material layer by comparing release rate versus packing material thickness curves with Nuclear Regulatory Commission (NRC) and Environmental Protection Agency (EPA) release limits

A SWOT Analysis of the Updated National HIV/AIDS Strategy for the U.S., 2015-2020.

Science.gov (United States)

Holtgrave, David R; Greenwald, Robert

2016-01-01

In July 2015, President Barack Obama released an updated National HIV/AIDS Strategy (NHAS) for the United States to guide HIV efforts through the year 2020. A federal action plan to accompany the updated NHAS will be released in December 2015. In this editorial, we offer a strengths, weaknesses, opportunities and threats analysis with the aim of increasing discussion of ways to truly fulfill the promise of the updated NHAS and to address barriers that may thwart it from achieving its full potential.

A consumption-based GHG inventory for the U.S. state of Oregon.

Science.gov (United States)

Erickson, Peter; Allaway, David; Lazarus, Michael; Stanton, Elizabeth A

2012-04-03

Many U.S. states conduct greenhouse gas (GHG) inventories to inform their climate change planning efforts. These inventories usually follow a production-based method adapted from the Intergovernmental Panel on Climate Change. States could also take a consumption-based perspective, however, and estimate all emissions released to support consumption in their state, regardless of where the emissions occur. In what may be the first such comprehensive inventory conducted for a U.S. state, we find that consumption-based emissions for Oregon are 47% higher than those released in-state. This finding implies that Oregon's contribution to global greenhouse gas emissions (carbon footprint) is considerably higher than traditional production-based methods would suggest. Furthermore, the consumption-based inventory helps highlight the role of goods and services (and associated purchasing behaviors) more so than do production-based methods. Accordingly, a consumption-based perspective opens new opportunities for many states and their local government partners to reduce GHG emissions, such as initiatives to advance lower-carbon public sector or household consumption, that are well within their sphere of influence. State and local governments should consider conducting consumption-based GHG inventories and adopting consumption-based emission reductions targets in order to broaden the reach and effectiveness of state and local actions in reducing global GHG emissions. Consumption-based frameworks should be viewed as a complement to, but not a substitute for, production-based (in-state) GHG emissions inventories and targets.

Accelerated Best Basis Inventory Baselining Task

International Nuclear Information System (INIS)

SASAKI, L.M.

2001-01-01

The baselining effort was recently proposed to bring the Best-Basis Inventory (BBI) and Question No.8 of the Tank Interpretive Report (TIR) for all 177 tanks to the current standards and protocols and to prepare a TIR Question No.8 if one is not already available. This plan outlines the objectives and methodology of the accelerated BBI baselining task. BBI baselining meetings held during December 2000 resulted in a revised BBI methodology and an initial set of BBI creation rules to be used in the baselining effort. The objectives of the BBI baselining effort are to: (1) Provide inventories that are consistent with the revised BBI methodology and new BBI creation rules. (2) Split the total tank waste in each tank into six waste phases, as appropriate (Supernatant, saltcake solids, saltcake liquid, sludge solids, sludge liquid, and retained gas). In some tanks, the solids and liquid portions of the sludge and/or saltcake may be combined into a single sludge or saltcake phase. (3) Identify sampling events that are to be used for calculating the BBIs. (4) Update waste volumes for subsequent reconciliation with the Hanlon (2001) waste tank summary. (5) Implement new waste type templates. (6) Include any sample data that might have been unintentionally omitted in the previous BBI and remove any sample data that should not have been included. Sample data to be used in the BBI must be available on TWINS. (7) Ensure that an inventory value for each standard BBI analyte is provided for each waste component. Sample based inventories for supplemental BBI analytes will be included when available. (8) Provide new means and confidence interval reports if one is not already available and include uncertainties in reporting inventory values

Inventory and characteristics of current and projected low-level radioactive materials and waste in the United States

International Nuclear Information System (INIS)

Bisaria, A.; Bugos, R.G.; Pope, R.B.; Salmon, R.; Storch, S.N.; Lester, P.B.

1994-01-01

The Integrated Data Base (IDB), under US Department of Energy (DOE) funding and guidance, provides an annual update of compiled data on current and projected inventories and characteristics of DOE and commercially owned radioactive wastes. The data base addresses also the inventories of DOE and commercial spent fuel. These data are derived from reliable information from government sources, open literature, technical reports, and direct contacts. The radioactive materials considered are spent nuclear fuel, high-level waste (HLW), transuranic (TRU) waste, low-level waste (LLW), commercial uranium mill tailings, environmental restoration wastes, and mixed-LLW. This paper primarily focuses on LLW inventory and characterization

Toxic releases from power plants

International Nuclear Information System (INIS)

Rubin, E.S.

1999-01-01

Beginning in 1998, electric power plants burning coal or oil must estimate and report their annual releases of toxic chemicals listed in the Toxics Release Inventory (TRI) published by the US Environmental Protection Agency (EPA). This paper identifies the toxic chemicals of greatest significance for the electric utility sector and develops quantitative estimates of the toxic releases reportable to the TRI for a representative coal-fired power plant. Key factors affecting the magnitude and types of toxic releases for individual power plants also are discussed. A national projection suggests that the magnitude of electric utility industry releases will surpass those of the manufacturing industries which current report to the TRI. Risk communication activities at the community level will be essential to interpret and provide context for the new TRI results

A high-resolution regional emission inventory of atmospheric mercury and its comparison with multi-scale inventories: a case study of Jiangsu, China

Directory of Open Access Journals (Sweden)

H. Zhong

2016-12-01

Full Text Available A better understanding of the discrepancies in multi-scale inventories could give an insight into their approaches and limitations as well as provide indications for further improvements; international, national, and plant-by-plant data are primarily obtained to compile those inventories. In this study we develop a high-resolution inventory of Hg emissions at 0.05°  ×  0.05° for Jiangsu, China, using a bottom-up approach and then compare the results with available global/national inventories. With detailed information on individual sources and the updated emission factors from field measurements applied, the annual Hg emissions of anthropogenic origin in Jiangsu in 2010 are estimated at 39 105 kg, of which 51, 47, and 2 % were Hg0, Hg2+, and Hgp, respectively. This provincial inventory is thoroughly compared to three downscaled national inventories (NJU, THU, and BNU and two global ones (AMAP/UNEP and EDGARv4.tox2. Attributed to varied methods and data sources, clear information gaps exist in multi-scale inventories, leading to differences in the emission levels, speciation, and spatial distributions of atmospheric Hg. The total emissions in the provincial inventory are 28, 7, 19, 22, and 70 % larger than NJU, THU, BNU, AMAP/UNEP, and EDGARv4.tox2, respectively. For major sectors, including power generation, cement, iron and steel, and other coal combustion, the Hg contents (HgC in coals/raw materials, abatement rates of air pollution control devices (APCDs and activity levels are identified as the crucial parameters responsible for the differences in estimated emissions between inventories. Regarding speciated emissions, a larger fraction of Hg2+ is found in the provincial inventory than national and global inventories, resulting mainly from the results by the most recent domestic studies in which enhanced Hg2+ were measured for cement and iron and steel plants. Inconsistent information on large power and industrial plants is

Update History of This Database - D-HaploDB | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us D-HaploDB Update History of This Database Date Update contents 2016/12/13 Description of the.../orca.gen.kyushu-u.ac.jp/) is released. About This Database Database Description Download License Update History of This Database... Site Policy | Contact Us Update History of This Database - D-HaploDB | LSDB Archive ...

Release of segregated nuclides from spent fuel

Energy Technology Data Exchange (ETDEWEB)

Johnson, L.H.; Tait, J.C. [Atomic Energy Canada Ltd., Pinawa, MB (Canada). Whiteshell Laboratories

1997-10-01

The potential release of fission and activation products from spent nuclear fuel into groundwater after container failure in the Swedish deep repository is discussed. Data from studies of fission gas release from representative Swedish BWR fuel are used to estimate the average fission gas release for the spent fuel population. Information from a variety of leaching studies on LWR and CANDU fuel are then reviewed as a basis for estimating the fraction of the inventory of key radionuclides that could be released preferentially (the Instant Release Fraction of IRF) upon failure of the fuel cladding. The uncertainties associated with these estimates are discussed. 33 refs, 6 figs, 3 tabs.

An inventory of wells of Oak Ridge National Laboratory 1992

Energy Technology Data Exchange (ETDEWEB)

Rush, R.M.; Gryder, R.K.; Baxter, F.P.

1993-02-01

The well inventory described in this report is a database of well information being developed for the Oak Ridge National Laboratory (ORNL) Groundwater Coordinator and the ORNL Groundwater Protection Program. Data are presented on 2071 ORNL wells as maps and as tabular data. A table of well identification aliases is given to permit correlation with earlier reports. Information is incomplete for many of the wells, and a form is provided for readers to provide missing or updated data. The goal of the developers of this data base is to produce a comprehensive inventory of wells at ORNL. This data base is being maintained to provide current information for the operational management of the ORNL groundwater monitoring system and for various users of groundwater data at ORNL.

An inventory of wells of Oak Ridge National Laboratory 1992

International Nuclear Information System (INIS)

Rush, R.M.; Gryder, R.K.; Baxter, F.P.

1993-02-01

The well inventory described in this report is a database of well information being developed for the Oak Ridge National Laboratory (ORNL) Groundwater Coordinator and the ORNL Groundwater Protection Program. Data are presented on 2071 ORNL wells as maps and as tabular data. A table of well identification aliases is given to permit correlation with earlier reports. Information is incomplete for many of the wells, and a form is provided for readers to provide missing or updated data. The goal of the developers of this data base is to produce a comprehensive inventory of wells at ORNL. This data base is being maintained to provide current information for the operational management of the ORNL groundwater monitoring system and for various users of groundwater data at ORNL

Commercial SNF Accident Release Fractions

Energy Technology Data Exchange (ETDEWEB)

J. Schulz

2004-11-05

The purpose of this analysis is to specify and document the total and respirable fractions for radioactive materials that could be potentially released from an accident at the repository involving commercial spent nuclear fuel (SNF) in a dry environment. The total and respirable release fractions are used to support the preclosure licensing basis for the repository. The total release fraction is defined as the fraction of total commercial SNF assembly inventory, typically expressed as an activity inventory (e.g., curies), of a given radionuclide that is released to the environment from a waste form. Radionuclides are released from the inside of breached fuel rods (or pins) and from the detachment of radioactive material (crud) from the outside surfaces of fuel rods and other components of fuel assemblies. The total release fraction accounts for several mechanisms that tend to retain, retard, or diminish the amount of radionuclides that are available for transport to dose receptors or otherwise can be shown to reduce exposure of receptors to radiological releases. The total release fraction includes a fraction of airborne material that is respirable and could result in inhalation doses; this subset of the total release fraction is referred to as the respirable release fraction. Accidents may involve waste forms characterized as: (1) bare unconfined intact fuel assemblies, (2) confined intact fuel assemblies, or (3) canistered failed commercial SNF. Confined intact commercial SNF assemblies at the repository are contained in shipping casks, canisters, or waste packages. Four categories of failed commercial SNF are identified: (1) mechanically and cladding-penetration damaged commercial SNF, (2) consolidated/reconstituted assemblies, (3) fuel rods, pieces, and debris, and (4) nonfuel components. It is assumed that failed commercial SNF is placed into waste packages with a mesh screen at each end (CRWMS M&O 1999). In contrast to bare unconfined fuel assemblies, the

Commercial SNF Accident Release Fractions

International Nuclear Information System (INIS)

Schulz, J.

2004-01-01

The purpose of this analysis is to specify and document the total and respirable fractions for radioactive materials that could be potentially released from an accident at the repository involving commercial spent nuclear fuel (SNF) in a dry environment. The total and respirable release fractions are used to support the preclosure licensing basis for the repository. The total release fraction is defined as the fraction of total commercial SNF assembly inventory, typically expressed as an activity inventory (e.g., curies), of a given radionuclide that is released to the environment from a waste form. Radionuclides are released from the inside of breached fuel rods (or pins) and from the detachment of radioactive material (crud) from the outside surfaces of fuel rods and other components of fuel assemblies. The total release fraction accounts for several mechanisms that tend to retain, retard, or diminish the amount of radionuclides that are available for transport to dose receptors or otherwise can be shown to reduce exposure of receptors to radiological releases. The total release fraction includes a fraction of airborne material that is respirable and could result in inhalation doses; this subset of the total release fraction is referred to as the respirable release fraction. Accidents may involve waste forms characterized as: (1) bare unconfined intact fuel assemblies, (2) confined intact fuel assemblies, or (3) canistered failed commercial SNF. Confined intact commercial SNF assemblies at the repository are contained in shipping casks, canisters, or waste packages. Four categories of failed commercial SNF are identified: (1) mechanically and cladding-penetration damaged commercial SNF, (2) consolidated/reconstituted assemblies, (3) fuel rods, pieces, and debris, and (4) nonfuel components. It is assumed that failed commercial SNF is placed into waste packages with a mesh screen at each end (CRWMS M andO 1999). In contrast to bare unconfined fuel assemblies, the

Inventory of accidents and losses at sea involving radioactive material

International Nuclear Information System (INIS)

2001-09-01

The present report describes the content of the inventory of accidents and losses at sea involving radioactive material. It covers accidents and losses resulting in the actual release of radioactive materials into the marine environment and also those which have the potential for release. For completeness, records of radioactive materials involved in accidents but which were recovered intact from the sea are also reported. Information on losses of sealed sources resulting in actual or potential release of activity to the marine environment nad of sealed sources that were recovered intact is also presented

Automated Inventory and Monitoring of the ALICE HLT Cluster Resources with the SysMES Framework

International Nuclear Information System (INIS)

Ulrich, J; Lara, C; Böttger, S; Kebschull, U; Haaland, Ø; Röhrich, D

2012-01-01

The High-Level-Trigger (HLT) cluster of the ALICE experiment is a computer cluster with about 200 nodes and 20 infrastructure machines. In its current state, the cluster consists of nearly 10 different configurations of nodes in terms of installed hardware, software and network structure. In such a heterogeneous environment with a distributed application, information about the actual configuration of the nodes is needed to automatically distribute and adjust the application accordingly. An inventory database provides a unified interface to such information. To be useful, the data in the inventory has to be up to date, complete and consistent. Manual maintenance of such databases is error-prone and data tends to become outdated. The inventory module of the ALICE HLT cluster overcomes these drawbacks by automatically updating the actual state periodically and, in contrast to existing solutions, it allows the definition of a target state for each node. A target state can simply be a fully operational state, i.e. a state without malfunctions, or a dedicated configuration of the node. The target state is then compared to the actual state to detect deviations and malfunctions which could induce severe problems when running the application. The inventory module of the ALICE HLT cluster has been integrated into the monitoring and management framework SysMES in order to use existing functionality like transactionality and monitoring infrastructure. Additionally, SysMES allows to solve detected problems automatically via its rule-system. To describe the heterogeneous environment with all its specifics, like custom hardware, the inventory module uses an object-oriented model which is based on the Common Information Model. The inventory module provides an automatically updated actual state of the cluster, detects discrepancies between the actual and the target state and is able to solve detected problems automatically. This contribution presents the current implementation

Spent fuel and waste inventories and projections

International Nuclear Information System (INIS)

Carter, W.L.; Finney, B.C.; Alexander, C.W.; Blomeke, J.O.; McNair, J.M.

1980-08-01

Current inventories of commercial spent fuels and both commercial and US Department of Energy radioactive wastes were compiled, based on judgments of the most reliable information available from Government sources and the open literature. Future waste generation rates and quantities to be accumulated over the remainder of this century are also presented, based on a present projection of US commercial nuclear power growth and expected defense-related activities. Spent fuel projections are based on the current DOE/EIA estimate of nuclear growth, which projects 180 GW(e) in the year 2000. It is recognized that the calculated spent fuel discharges are probably high in view of recent reactor cancellations; hence adjustments will be made in future updates of this report. Wastes considered, on a chapter-by-chapter basis, are: spent fuel, high-level wastes, transuranic wastes, low-level wastes, mill tailings (active sites), and remedial action wastes. The latter category includes mill tailings (inactive sites), surplus facilities, formerly utilized sites, and the Grand Junction Project. For each category, waste volume inventories and projections are given through the year 2000. The land usage requirements are given for storage/disposal of low-level and transuranic wastes, and for present inventories of mill tailings

The estimation and prediction of the inventories for the liquid and gaseous radwaste systems using the linear regression analysis

International Nuclear Information System (INIS)

Kim, J. Y.; Shin, C. H.; Kim, J. K.; Lee, J. K.; Park, Y. J.

2003-01-01

The variation transitions of the inventories for the liquid radwaste system and the radioactive gas have being released in containment, and their predictive values according to the operation histories of Yonggwang(YGN) 3 and 4 were analyzed by linear regression analysis methodology. The results show that the variation transitions of the inventories for those systems are linearly increasing according to the operation histories but the inventories released to the environment are considerably lower than the recommended values based on the FSAR suggestions. It is considered that some conservation were presented in the estimation methodology in preparing stage of FSAR

Updated safety analysis of ITER

Energy Technology Data Exchange (ETDEWEB)

Taylor, Neill, E-mail: neill.taylor@iter.org [ITER Organization, CS 90 046, 13067 St Paul Lez Durance Cedex (France); Baker, Dennis; Ciattaglia, Sergio; Cortes, Pierre; Elbez-Uzan, Joelle; Iseli, Markus; Reyes, Susana; Rodriguez-Rodrigo, Lina; Rosanvallon, Sandrine; Topilski, Leonid [ITER Organization, CS 90 046, 13067 St Paul Lez Durance Cedex (France)

2011-10-15

An updated version of the ITER Preliminary Safety Report has been produced and submitted to the licensing authorities. It is revised and expanded in response to requests from the authorities after their review of an earlier version in 2008, to reflect enhancements in ITER safety provisions through design changes, to incorporate new and improved safety analyses and to take into account other ITER design evolution. The updated analyses show that changes to the Tokamak cooling water system design have enhanced confinement and reduced potential radiological releases as well as removing decay heat with very high reliability. New and updated accident scenario analyses, together with fire and explosion risk analyses, have shown that design provisions are sufficient to minimize the likelihood of accidents and reduce potential consequences to a very low level. Taken together, the improvements provided a stronger demonstration of the very good safety performance of the ITER design.

Updated safety analysis of ITER

International Nuclear Information System (INIS)

Taylor, Neill; Baker, Dennis; Ciattaglia, Sergio; Cortes, Pierre; Elbez-Uzan, Joelle; Iseli, Markus; Reyes, Susana; Rodriguez-Rodrigo, Lina; Rosanvallon, Sandrine; Topilski, Leonid

2011-01-01

An updated version of the ITER Preliminary Safety Report has been produced and submitted to the licensing authorities. It is revised and expanded in response to requests from the authorities after their review of an earlier version in 2008, to reflect enhancements in ITER safety provisions through design changes, to incorporate new and improved safety analyses and to take into account other ITER design evolution. The updated analyses show that changes to the Tokamak cooling water system design have enhanced confinement and reduced potential radiological releases as well as removing decay heat with very high reliability. New and updated accident scenario analyses, together with fire and explosion risk analyses, have shown that design provisions are sufficient to minimize the likelihood of accidents and reduce potential consequences to a very low level. Taken together, the improvements provided a stronger demonstration of the very good safety performance of the ITER design.

Calculation of the inventory and near-field release rates of radioactivity from neutron-activated metal parts discharged from the high flux isotope reactor and emplaced in solid waste storage area 6 at Oak Ridge National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Kelmers, A.D.; Hightower, J.R.

1987-05-01

Emplacement of contaminated reactor components involves disposal in lined and unlined auger holes in soil above the water table. The radionuclide inventory of disposed components was calculated. Information on the composition and weight of the components, as well as reasonable assumptions for the neutron flux fueling use, the time of neutron exposure, and radioactive decay after discharge, were employed in the inventory calculation. Near-field release rates of /sup 152/Eu, /sup 154/Eu, and /sup 155/Eu from control plates and cylinders were calculated for 50 years after emplacement. Release rates of the europium isotopes were uncertain. Two release-rate-limiting models were considered and a range of reasonable values were assumed for the time-to-failure of the auger-hole linear and aluminum cladding and europium solubility in SWSA-6 groundwater. The bounding europium radionuclide near-field release rates peaked at about 1.3 Ci/year total for /sup 152,154,155/Eu in 1987 for the lower bound, and at about 420 Ci/year in 1992 for the upper bound. The near-field release rates of /sup 55/Fe, /sup 59/Ni, /sup 60/Co, and /sup 63/Ni from stainless steel and cobalt alloy components, as well as of /sup 10/Be, /sup 41/Ca, and /sup 55/Fe from beryllium reflectors, were calculated for the next 100 years, assuming bulk waste corrosion was the release-rate-limiting step. Under the most conservative assumptions for the reflectors, the current (1986) total radionuclide release rate was calculated to be about 1.2 x 10/sup -4/ Ci/year, decreasing by 1992 to a steady release of about 1.5 x 10/sup -5/ Ci/year due primarily to /sup 41/Ca. 50 refs., 13 figs., 8 tabs.

Licensed-fuel-facility status report, inventory difference data January 1981-June 1981

International Nuclear Information System (INIS)

1982-07-01

NRC is committed to the periodic release of inventory difference data from the licensed fuel facilities after the agency has had an opportunity to review the data and has performed any related investigations associated with the data. Information included in this report includes inventory difference data for active fuel fabrication facilities possessing more than one effective kilogram of high enriched uranium, low enriched uranium, plutonium, or uranium-233

WIMS-D library update

International Nuclear Information System (INIS)

2007-05-01

WIMS-D (Winfrith Improved Multigroup Scheme-D) is the name of a family of software packages for reactor lattice calculations and is one of the few reactor lattice codes in the public domain and available on noncommercial terms. WIMSD-5B has recently been released from the OECD Nuclear Energy Agency Data Bank, and features major improvements in machine portability, as well as incorporating a few minor corrections. This version supersedes WIMS-D/4, which was released by the Winfrith Technology Centre in the United Kingdom for IBM machines and has been adapted for various other computer platforms in different laboratories. The main weakness of the WIMS-D package is the multigroup constants library, which is based on very old data. The relatively good performance of WIMS-D is attributed to a series of empirical adjustments to the multigroup data. However, the adjustments are not always justified on the basis of more accurate and recent experimental measurements. Following the release of new and revised evaluated nuclear data files, it was felt that the performance of WIMS-D could be improved by updating the associated library. The WIMS-D Library Update Project (WLUP) was initiated in the early 1990s with the support of the IAEA. This project consisted of voluntary contributions from a large number of participants. Several benchmarks for testing the library were identified and analysed, the WIMSR module of the NJOY code system was upgraded and the author of NJOY accepted the proposed updates for the official code system distribution. A detailed parametric study was performed to investigate the effects of various data processing input options on the integral results. In addition, the data processing methods for the main reactor materials were optimized. Several partially updated libraries were produced for testing purposes. The final stage of the WLUP was organized as a coordinated research project (CRP) in order to speed up completion of the fully updated library

USER'S GUIDE TO THE PERSONAL COMPUTER VERSION OF THE BIOGENIC EMISSIONS INVENTORY SYSTEM (PC-BEIS2)

Science.gov (United States)

The document is a user's guide for an updated Personal Computer version of the Biogenic Emissions Inventory System (PC-BEIS2), allowing users to estimate hourly emissions of biogenic volatile organic compounds (BVOCs) and soil nitrogen oxide emissions for any county in the contig...

Inventory of radioactive corrosion products on the primary surfaces and release during shutdown in Ringhals 2

International Nuclear Information System (INIS)

Aronsson, O.

1994-01-01

In Ringhals 2 a retrospective study using gamma scans of system surfaces, fuel crud sampling and reactor coolant analyses during operation and shutdown has been done. The data have been used to prepare a balance of activity inventory. The inventory has been fairly stable from 1986 to 1993, expressed as a gamma source term. The steam generator replacement in 1989 removed some 40-50% of the Co-60 inventory in the reactor system. After the steam generator replacement, the gamma source term has got an increasing contribution from Co-58, absolutely as well as relatively. The reason for this is probably the switch from high pH operation to modified pH operation. Corrosion from fresh alloy 690 surfaces in the new steam generators is probably another contributing factor. The inventory and production rate of Co-60 is decreasing over the years. It has also been found that clean-up of the reactor coolant during start-up, operation, and shutdown as well as the fuel pool during refuelling removes about the same amounts of Co-60. (author). 11 figs., 15 refs

The Spanish National Forest Inventory: history, development, challenges and perspectives

Directory of Open Access Journals (Sweden)

Iciar Alberdi

2017-09-01

Full Text Available It is important to have a statistically robust forest information data base which can be updated and can provide long-term information. National Forest Inventories (NFI provide one of the best large-scale sources of information, and therefore are a cornerstone of forest policies. The scopes of NFIs, which are the primary source of data for national and large-area assessments, has been broadened to include new variables to meet increasing information requirements. This paper describes the history, methodology and guidance of Spanish NFI and international requirements. The current objectives are determined by analysing future perspectives and possible direction of future assessments. These objectives include harmonization of NFI, open data source and to broaden the number of field variables monitored (multi-objective inventory in order to effectively fulfil information requirements.

THE RADIAL VELOCITY EXPERIMENT (RAVE): THIRD DATA RELEASE

International Nuclear Information System (INIS)

Siebert, A.; Williams, M. E. K.; Siviero, A.; Boeche, C.; Steinmetz, M.; De Jong, R. S.; Enke, H.; Anguiano, B.; Reid, W.; Ritter, A.; Fulbright, J.; Wyse, R. F. G.; Munari, U.; Zwitter, T.; Watson, F. G.; Burton, D.; Cass, C. J. P.; Fiegert, K.; Hartley, M.; Russel, K. S.

2011-01-01

We present the third data release of the RAdial Velocity Experiment (RAVE) which is the first milestone of the RAVE project, releasing the full pilot survey. The catalog contains 83,072 radial velocity measurements for 77,461 stars in the southern celestial hemisphere, as well as stellar parameters for 39,833 stars. This paper describes the content of the new release, the new processing pipeline, as well as an updated calibration for the metallicity based upon the observation of additional standard stars. Spectra will be made available in a future release. The data release can be accessed via the RAVE Web site.

Pollutant Release and Transfer Register; Emissieregistratie

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-07-01

Since 1974 a number of organisations have been working closely together in this pollutant register (PRTR) project to collect and formally establish the yearly releases of pollutants to air, water and soil in the Netherlands. Results of this project serve to underpin the national environmental policy. Data is in this way also provided for the many environmental reports to international organisations such as the European Union and the United Nations, e.g. the National Inventory Report for the Kyoto Protocol. This website shows the yearly releases (emissions) of the most important pollutants in the Netherlands. You can explore the emission data through various channels, such as maps, graphs and tables. But you can also download all the details into your own database. The data shown in this website is updated 2 to 3 times a year. The current release shows emissions for 1990, 1995, 2000, 2004, 2005 and 2006 The 2006 emissions are preliminary data and not yet shown in the maps. We expect to add an extra year in August 2008. [Dutch] Sinds 1974 werkt een groot aantal organisaties hecht samen in het project Emissieregistratie. Doel is het jaarlijks verzamelen en vaststellen van de uitstoot van verontreinigende stoffen naar lucht, water en bodem. Het project levert zo de emissiegegevens voor onderbouwing van milieubeleid. Het vormt de basis voor vele rapportages, bijvoorbeeld die in het kader van het Kyoto protocol. Deze website toont de geregionaliseerde uitstoot (emissie) van ruim 300 verontreinigende stoffen in Nederland. U vindt deze emissies op diverse manieren: als kaart, grafiek en tabel maar ook in de vorm van een database voor eigen gebruik. U vindt hier de emissies uit de inventarisatieronde vastgesteld in juli 2007 voor de emissiejaren 1990, 1995, 2000, 2004, 2005 en de voorlopige cijfers van 2006. De emissies uit 2006 zijn wel gedetailleerd per bron aanwezig maar u vindt ze nog niet op de kaart gepresenteerd. In augustus 2008 verwachten we de volgende ronde te

Experiments to Measure Hydrogen Release from Graphite Walls During Disruptions in DIII-D

International Nuclear Information System (INIS)

Hollmann, E.M.; Pablant, N.A.; Rudakov, D.L.; Boedo, J.A.; Brooks, N.H.; Jernigan, Thomas C.; Pigarov, A.Y.

2009-01-01

Spectroscopy and wall the bake-out measurements are performed in the DIII-D tokamak to estimate the amount of hydrogen stored in and released from the walls during disruptions. Both naturally occurring disruptions and disruptions induced by massive gas injection (MGI) are investigated. The measurements indicate that both types of disruptions cause a net release of order 10(21) hydrogen (or deuterium) atoms from the graphite walls. This is comparable to the pre-disruptions plasma particle inventory, so the released hydrogen is important for accurate modeling of disruptions. However, the amount of hydrogen released is small compared to the total saturated wall inventory of order 10(22)-10(23), So it appears that many disruptions are necessary to provide full pump-out of the vessel walls. (C) 2009 Published by Elsevier B.V.

An inventory of publications on electronic medical records revisited.

Science.gov (United States)

Moorman, P W; Schuemie, M J; van der Lei, J

2009-01-01

In this short review we provide an update of our earlier inventories of publications indexed in MedLine with the MeSH term 'Medical Records Systems, Computerized'. We retrieved and analyzed all references to English articles published before January 1, 2008, and indexed in PubMed with the MeSH term 'Medical Records Systems, Computerized'. We retrieved a total of 11,924 publications, of which 3937 (33%) appeared in a journal with an impact factor. Since 2002 the number of yearly publications, and the number of journals in which those publications appeared, increased. A cluster analysis revealed three clusters: an organizational issues cluster, a technically oriented cluster and a cluster about order-entry and research. Although our previous inventory in 2003 suggested a constant yearly production of publications on electronic medical records since 1998, the current inventory shows another rise in production since 2002. In addition, many new journals and countries have shown interest during the last five years. In the last 15 years, interest in organizational issues remained fairly constant, order entry and research with systems gained attention, while interest in technical issues relatively decreased.

Inventory of greenhouse gases emissions from gasoline and diesel ...

African Journals Online (AJOL)

Emissions from fossil fuel combustion are of global concern due to their negative effects on public health and environment. This paper is an inventory of the greenhouse gases (GHGs) released into the environment through consumption of fuels (gasoline and diesel) in Nigeria from 1980 to 2014. The fuel consumption data ...

Hydrogen isotope inventory in the graphite divertor tiles of ASDEX Upgrade as measured by thermal desorption spectroscopy

International Nuclear Information System (INIS)

Franzen, P.; Behrisch, R.; Garcia-Rosales, C.; Schleussner, D.; Roesler, D.; Becker, J.; Knapp, W.; Edelmann, C.

1997-01-01

The hydrogen and deuterium inventories of the ASDEX Upgrade divertor tiles were measured after the experimental period from December 1994 to July 1995 by thermal desorption spectroscopy (TDS) of samples cut out of the divertor tiles. The samples were heated by electron bombardment up to 2100 K; the released gases were measured by means of a calibrated quadrupole mass spectrometer. The measured hydrogen or deuterium inventories are of the order of 10 23 m -2 . They are larger for samples of the inner divertor than of the outer divertor by a factor of about 2. The largest inventory was found at the separatrix position of the inner divertor. Most of the released hydrogen (H) can be attributed to water adsorbed in the near surface region during the air exposure prior to the TDS measurements. The total inventories measured by TDS exceed the inventories in the near surface region (< 25 μm) measured by ion beam analysis methods by a factor of up to 10. Hence, the total hydrogen retention is governed by the diffusion out of the near surface region deep into the material. The hydrogen and deuterium inventories decreased with increasing surface temperature. (author). 64 refs, 12 figs, 2 tabs

Control decisions for 3H, 14C, 85Kr, and 129I released from the commercial fuel cycle

International Nuclear Information System (INIS)

Thomas, T.R.; Brown, R.A.

1985-01-01

The effects of complete release of 3 H, 14 C, 85 Kr and 129 I from operating a 400-GWe fuel cycle for 100 years are shown. The postulated accrued health effects (HE) from 14 C and 129 I appear large; however, these numbers are insignificant when compared to the 176 billion cancer deaths that would occur from all causes in the 10,000-year reference period. The percent increase in global cancer deaths would be no greater than 5 x 10 -5 % for each of the radionuclides. Based on the 1980 inventory of each radionuclide in the environment, complete release for 100 years from a 400-GWe fuel cycle would not increase the 3 H or 14 C inventories, however, large increases in 85 Kr and 129 I inventories would occur. The effects, besides dose impacts, of large increases in inventory are unknown and serve only as warning flags that should be taken into consideration. Only 129 I releases from a fuel reprocessing plant would exceed the allowable maximum exposed individual dose limit and 85 Kr and 129 I would exceed the allowable release limit. The effects of controlled releases from commercial fuel reprocessing plants serving a 400-GWe fuel cycle for 100 years are also shown

Tellurium release and deposition during the TMI-2 accident

International Nuclear Information System (INIS)

Vinjamuri, K.; Osetek, D.J.; Hobbins, R.R.; Jessup, J.S.

1984-09-01

The estimated behavior of tellurium during and after the accident at the Three Mile Island Unit-2 is presented. The behavior is based on all available measurement data for /sup 129m/Te, 132 Te, stable tellurium ( 126 Te, 128 Te and 130 Te), and best estimate calculations of tellurium release and transport. The predicted release was calculated using current techniques that relate release rate to fuel temperature and holdup of tellurium in zircaloy until significant oxidation occurs. The calculated release fraction was low, approx. 7%, but the total measured release for samples analyzed to date is about 5.8%. Of the measured tellurium about 2.4, 1.8, 0.88, 0.42, 0.17 and 0.086% of core inventory were in the containment sump water, upper plenum assembly surfaces, containment solids in the sump water, makeup and purification demineralizer, containment inside surface, and the reactor primary coolant, respectively. A significant fraction (54%) of the tellurium calculated to be retained on the upper plenum surfaces (4.61% of the core inventory) was deposited during the high pressure injection of coolant at about 200 min after the reactor scram. Comparison of tellurium behavior with in-pile and out-of-pile tests strongly suggests that zircaloy holds tellurium until significant cladding oxidation occurs

78 FR 27242 - Updated Special Advisory Bulletin on the Effect of Exclusion From Participation in Federal Health...

Science.gov (United States)

2013-05-09

...] Updated Special Advisory Bulletin on the Effect of Exclusion From Participation in Federal Health Care... release of an updated Special Advisory Bulletin on the effect of exclusion from participation in Federal health care programs by OIG. The updated Special Advisory Bulletin describes the scope and effect of the...

"Updates to Model Algorithms & Inputs for the Biogenic Emissions Inventory System (BEIS) Model"

Science.gov (United States)

We have developed new canopy emission algorithms and land use data for BEIS. Simulations with BEIS v3.4 and these updates in CMAQ v5.0.2 are compared these changes to the Model of Emissions of Gases and Aerosols from Nature (MEGAN) and evaluated the simulations against observatio...

The total release of xenon-133 from the Fukushima Dai-ichi nuclear power plant accident

International Nuclear Information System (INIS)

Stohl, Andreas; Seibert, Petra; Wotawa, Gerhard

2012-01-01

The accident at the Fukushima Dai-ichi nuclear power plant (FD-NPP) on 11 March 2011 released large amounts of radioactivity into the atmosphere. We determine the total emission of the noble gas xenon-133 ( 133 Xe) using global atmospheric concentration measurements. For estimating the emissions, we used three different methods: (i) using a purely observation-based multi-box model, (ii) comparisons of dispersion model results driven with GFS meteorological data with the observation data, and (iii) such comparisons with the dispersion model driven by ECMWF data. From these three methods, we have obtained total 133 Xe releases from FD-NPP of (i) 16.7 ± 1.9 EBq, (ii) 14.2 ± 0.8 EBq, and (iii) 19.0 ± 3.4 EBq, respectively. These values are substantially larger than the entire 133 Xe inventory of FD-NPP of about 12.2 EBq derived from calculations of nuclear fuel burn-up. Complete release of the entire 133 Xe inventory of FD-NPP and additional release of 133 Xe due to the decay of iodine-133 ( 133 I), which can add another 2 EBq to the 133 Xe FD-NPP inventory, is required to explain the atmospheric observations. Two of our three methods indicate even higher emissions, but this may not be a robust finding given the differences between our estimates. - Highlights: ► We determine the total release of xenon-133 from the Fukushima nuclear accident. ► We used global measurements and a box model, as well as dispersion model estimates. ► Total 133 Xe release is about 14.2-19 EBq, more than Fukushima 133 Xe inventory. ► Additional release of iodine-133 and decay into 133 Xe needed to explain results.

THE DEVELOPMENT OF A 1990 GLOBAL INVENTORY FOR SO(X) AND NO(X) ON A 1(DEGREE) X 1(DEGREE) LATITUDE-LONGITUDE GRID

International Nuclear Information System (INIS)

VAN HEYST, B.J.

1999-01-01

Sulfur and nitrogen oxides emitted to the atmosphere have been linked to the acidification of water bodies and soils and perturbations in the earth's radiation balance. In order to model the global transport and transformation of SO(sub x) and NO(sub x), detailed spatial and temporal emission inventories are required. Benkovitz et al. (1996) published the development of an inventory of 1985 global emissions of SO(sub x) and NO(sub x) from anthropogenic sources. The inventory was gridded to a 1(degree) x 1(degree) latitude-longitude grid and has served as input to several global modeling studies. There is now a need to provide modelers with an update of this inventory to a more recent year, with a split of the emissions into elevated and low level sources. This paper describes the development of a 1990 update of the SO(sub x) and NO(sub x) global inventories that also includes a breakdown of sources into 17 sector groups. The inventory development starts with a gridded global default EDGAR inventory (Olivier et al, 1996). In countries where more detailed national inventories are available, these are used to replace the emissions for those countries in the global default. The gridded emissions are distributed into two height levels (0-100m and and gt;100m) based on the final plume heights that are estimated to be typical for the various sectors considered. The sources of data as well as some of the methodologies employed to compile and develop the 1990 global inventory for SO(sub x) and NO(sub x) are discussed. The results reported should be considered to be interim since the work is still in progress and additional data sets are expected to become available

Radioactive releases into the environment under accidental conditions

International Nuclear Information System (INIS)

Beninson, D.

1976-01-01

Although accidents involving the release of radioactive materials and the unplanned exposure of people can occur at any stage of the nuclear fuel cycle, most attention has been focused on reactor accidents. Although no power reactor accidents involving exposure of the public have yet occured, it should be recognized that the probability of such accidental releases cannot be reduced to zero. Since the inventory of radioactive materials in power reactors is very large, it is usual to postulate, for safety assessments, that a release of fission products takes place in spite of all protective measures. This postulated release is of importance for reactor siting and for preparing emergency plans. (HP) [de

Assembly and evaluation of an inventory of guidelines that are available to support clinical hematology laboratory practice.

Science.gov (United States)

Hayward, C P M; Moffat, K A; George, T I; Proytcheva, M

2015-05-01

Practice guidelines provide helpful support for clinical laboratories. Our goal was to assemble an inventory of publically listed guidelines on hematology laboratory topics, to create a resource for laboratories and for assessing gaps in practice-focused guidelines. PubMed and website searches were conducted to assemble an inventory of hematology laboratory-focused guidelines. Exclusions included annual, technical, or collaborative study reports, clinically focused guidelines, position papers, nomenclature, and calibration documents. Sixty-eight guidelines were identified on hematology laboratory practice topics from 12 organizations, some as joint guidelines. The median year of publication was 2010 and 15% were >10 years old. Coagulation topics had the largest numbers of guidelines, whereas some areas of practice had few guidelines. A minority of guidelines showed evidence of periodic updates, as some organizations did not remove or identify outdated guidelines. This inventory of current practice guidelines will encourage awareness and uptake of guideline recommendations by the worldwide hematology laboratory community, with the International Society for Laboratory Hematology facilitating ongoing updates. There is a need to encourage best guideline development practices, to ensure that hematology laboratory community has current, high-quality, and evidence-based practice guidelines that cover the full scope of hematology laboratory practice. © 2015 John Wiley & Sons Ltd.

Design of books inventory with RFID antenna in library management system

Directory of Open Access Journals (Sweden)

Cheng Ching-Chien

2017-01-01

Full Text Available A 915 MHz printed radio-frequency-identification (RFID antennas with the characteristics of good gain and omnidirectional beam wave is constructed and evaluated in this study. The objective is to find out their best reading rates for providing effective wireless communications among RFID antenna during the library book inventory process. And an optimal library inventory system which is based on electromagnetic identification (EMID technology is proposed, which is constructed to find the optimal tag location for a book, test the tag readability for bookshelves, and connect a couple of multi-layer bookshelves with multiplexers and updat the tag reading status in the database of the computer terminal. The fabricated antenna reader and the proposed system are embedded into different locations of bookshelves and tested at the library of Cheng Shiu University in Taiwan. According to the experimental results, the designed prototype of the antenna reader has the characteristics of the directional radiation pattern, good gain, simple shape, low cost and is easy to be integrated into the bookshelf. And the designed library inventory system can authenticate the location of a book automatically. They can benefit administrating librarians with the capabilities of decreasing the library inventory processing time and reducing the possibility of the books being misplaced.

54Mn release from LMFBR cores

International Nuclear Information System (INIS)

Polley, M.V.

1976-10-01

The inventory of 54 Mn per unit exposed area of stainless steel in LMFBR cores may be calculated using a formula originally derived at HEDL. This treats the simultaneous production by activation and release by corrosion and diffusion of 54 Mn and assumes that the concentration at the steel surface is zero. The inventory per unit exposed area is calculated as a function of temperature and is compared with that calculated simply by assuming stoichiometric corrosion. An effective diffusion coefficient is used in the calculations which include contributions from both lattice and grain boundary diffusion. A general relationship is derived for the effective diffusion coefficient and it is shown how values may be obtained using the Levine-MacCallum and the Fisher theories of grain boundary diffusion. Values of the lattice diffusion coefficient were obtained by analysing data obtained from sodium loop experiments. The effect on the inventory due to the possible formation of a ferrite layers on the exposed surface is discussed and it is also shown how the inventory over several fuel cycles may be calculated. (U.K.)

Effect of surface water on tritium release behavior from Li4SiO4

International Nuclear Information System (INIS)

Hanada, T.; Fukada, S.; Nishikawa, M.; Suematsu, K.; Yamashita, N.; Kanazawa, T.

2010-01-01

The tritium release model to represent the release behavior of bred tritium from solid breeder materials has been developed by the blanket group of Kyushu University. It has been found that water is released to the purge gas from solid breeder materials and that this water affects the tritium release behavior. In this study, the amount of surface water released from Li 4 SiO 4 is quantified by the experiment. In addition, the tritium release behavior from Li 4 SiO 4 are estimated based on the tritium release model using parameters obtained in our studies under conditions of commercial reactor operation and ITER test blanket module operation. The effect of the surface water on tritium release behavior is discussed from the obtained results. Moreover, the tritium inventory of Li 4 SiO 4 is discussed based on calculation under the unsteady state condition. Further, the effects of grain size and temperature on distribution of tritium inventory under the steady state condition are evaluated, and the optimal grain size is discussed from the view point of tritium release from Li 4 SiO 4 .

Recent updates and developments to plant genome size databases

Science.gov (United States)

Garcia, Sònia; Leitch, Ilia J.; Anadon-Rosell, Alba; Canela, Miguel Á.; Gálvez, Francisco; Garnatje, Teresa; Gras, Airy; Hidalgo, Oriane; Johnston, Emmeline; Mas de Xaxars, Gemma; Pellicer, Jaume; Siljak-Yakovlev, Sonja; Vallès, Joan; Vitales, Daniel; Bennett, Michael D.

2014-01-01

Two plant genome size databases have been recently updated and/or extended: the Plant DNA C-values database (http://data.kew.org/cvalues), and GSAD, the Genome Size in Asteraceae database (http://www.asteraceaegenomesize.com). While the first provides information on nuclear DNA contents across land plants and some algal groups, the second is focused on one of the largest and most economically important angiosperm families, Asteraceae. Genome size data have numerous applications: they can be used in comparative studies on genome evolution, or as a tool to appraise the cost of whole-genome sequencing programs. The growing interest in genome size and increasing rate of data accumulation has necessitated the continued update of these databases. Currently, the Plant DNA C-values database (Release 6.0, Dec. 2012) contains data for 8510 species, while GSAD has 1219 species (Release 2.0, June 2013), representing increases of 17 and 51%, respectively, in the number of species with genome size data, compared with previous releases. Here we provide overviews of the most recent releases of each database, and outline new features of GSAD. The latter include (i) a tool to visually compare genome size data between species, (ii) the option to export data and (iii) a webpage containing information about flow cytometry protocols. PMID:24288377

Global emission inventory and atmospheric transport of black carbon. Evaluation of the associated exposure

Energy Technology Data Exchange (ETDEWEB)

Wang, Rong

2015-06-01

This thesis presents research focusing on the improvement of high-resolution global black carbon (BC) emission inventory and application in assessing the population exposure to ambient BC. A particular focus of the thesis is on the construction of a high-resolution (both spatial and sectorial) fuel consumption database, which is used to develop the emission inventory of black carbon. Above all, the author updates the global emission inventory of black carbon, a resource subsequently used to study the atmospheric transport of black carbon over Asia with the help of a high-resolution nested model. The thesis demonstrates that spatial bias in fuel consumption and BC emissions can be reduced by means of the sub-national disaggregation approach. Using the inventory and nested model, ambient BC concentrations can be better validated against observations. Lastly, it provides a complete uncertainty analysis of global black carbon emissions, and this uncertainty is taken into account in the atmospheric modeling, helping to better understand the role of black carbon in regional and global air pollution.

Integrated data base report--1995: US spent nuclear fuel and radioactive waste inventories, projections, and characteristics

International Nuclear Information System (INIS)

1996-12-01

The information in this report summarizes the U.S. Department of Energy (DOE) data base for inventories, projections, and characteristics of domestic spent nuclear fuel and radioactive waste. This report is updated annually to keep abreast of continual waste inventory and projection changes in both the government and commercial sectors. Baseline information is provided for DOE program planning purposes and to support DOE program decisions. Although the primary purpose of this document is to provide background information for program planning within the DOE community, it has also been found useful by state and local governments, the academic community, and some private citizens

An Integer Programming Model for Multi-Echelon Supply Chain Decision Problem Considering Inventories

Science.gov (United States)

Harahap, Amin; Mawengkang, Herman; Siswadi; Effendi, Syahril

2018-01-01

In this paper we address a problem that is of significance to the industry, namely the optimal decision of a multi-echelon supply chain and the associated inventory systems. By using the guaranteed service approach to model the multi-echelon inventory system, we develop a mixed integer; programming model to simultaneously optimize the transportation, inventory and network structure of a multi-echelon supply chain. To solve the model we develop a direct search approach using a strategy of releasing nonbasic variables from their bounds, combined with the “active constraint” method. This strategy is used to force the appropriate non-integer basic variables to move to their neighbourhood integer points.

Cost of umbilical cord blood units released for transplantation.

Science.gov (United States)

Sirchia, G; Rebulla, P; Tibaldi, S; Lecchi, L

1999-06-01

A large number of institutions have started programs banking umbilical cord blood (UCB) for allogeneic unrelated-donor and related-donor transplantation. However, limited information is available on the financial issues surrounding these activities. The aim of this study was to determine the fee per UCB unit released for transplantation that would allow cost recovery after 10 years. Three organizational models were considered suitable to provide units for five UCB transplants per 1 million population per year, a figure that would translate into an annual need for 280 units in Italy. Models A, B, and C included, respectively, seven networked banks, each with an inventory of 1,500 units; two networked banks, each with an inventory of 5,000 units; and one bank with an inventory of 10,000 units. It was estimated that it would take 3 years to develop the cryopreserved inventory and that approximately 3 percent of the inventory could be released and replaced each year during the 7-year interval between the fourth and tenth years of activity. The data on the costs of labor, reagents and diagnostics, disposables, depreciation and maintenance, laboratory tests, and overhead, as well as the operational data used in the analysis were collected at the Milano Cord Blood Bank in 1996. Fees of US $15,061, $12,666, and $11,602 per unit released during the fourth through the tenth years of activity allow full cost recovery (principle and interest) under Models A, B, and C, respectively. Although UCB procurement costs compare favorably with those of other hematopoietic cell sources, these results and the current fee of US $15,300 used in some institutions show that UCB is an expensive resource. Therefore, judicious planning of banking programs with high quality standards is necessary to prevent economic losses. The advantages of lower fees associated with the centralized banking approach of Model C should be balanced with the more flexible collection offered by Model A.

Transient fission product release during reactor shutdown and startup

International Nuclear Information System (INIS)

Hunt, C.E.L.; Lewis, B.J.

1995-01-01

Sweep gas experiments performed at CRL from 1979 to 1985 have been analysed to determine the fraction of the fission product gas inventory that is released on reactor shutdown and startup. Empirical equations were derived and applied to calculate the xenon release from companion fuel elements and from a well documented experimental fuel bundle irradiated in the NRU reactor. The measured gas release could be matched to within about a factor of two for an experimental irradiation with a burnup of 217 MWh/kgU. (author)

Steady-State Flammable Gas Release Rate Calculation And Lower Flammability Level Evaluation For Hanford Tank Waste

International Nuclear Information System (INIS)

Meacham, J.E.

2008-01-01

This report assesses the steady state flammability level under off normal ventilation conditions in the tank headspace for 28 double-shell tanks (DST) and 149 single shell-tanks (SST) at the Hanford Site. Flammability was calculated using estimated gas release rates, Le Chatelier's rule, and lower flammability limits of fuels in an air mixture. This revision updates the hydrogen generation rate input data for al1 177 tanks using waste composition information from the Best Basis Inventory Detail Report (data effective as of August 4,2008). Assuming only barometric breathing, the shortest time to reach 25% of the lower flammability limit is 13 days for DSTs (i.e., tank 241-AZ-102) and 36 days for SSTs (i.e., tank 241-B-203). Assuming zero ventilation, the shortest time to reach 25% of the lower flammability limit is 12 days for DSTs (i.e., tank 241-AZ-102) and 34 days for SSTs (i.e., tank 241-B-203).

Steady-State Flammable Gas Release Rate Calculation And Lower Flammability Level Evaluation For Hanford Tank Waste

International Nuclear Information System (INIS)

Meacham, J.E.

2009-01-01

This report assesses the steady state flammability level under off normal ventilation conditions in the tank headspace for 28 double-shell tanks (DST) and 149 single shell-tanks (SST) at the Hanford Site. Flammability was calculated using estimated gas release rates, Le Chatelier's rule, and lower flammability limits of fuels in an air mixture. This revision updates the hydrogen generation rate input data for all 177 tanks using waste composition information from the Best Basis Inventory Detail Report (data effective as of August 4,2008). Assuming only barometric breathing, the shortest time to reach 25% of the lower flammability limit is 11 days for DSTs (i.e., tank 241-AZ-10l) and 36 days for SSTs (i.e., tank 241-B-203). Assuming zero ventilation, the shortest time to reach 25% of the lower flammability limit is 10 days for DSTs (i.e., tank 241-AZ-101) and 34 days for SSTs (i.e., tank 241-B-203).

African anthropogenic combustion emission inventory: specificities and uncertainties

Science.gov (United States)

Sekou, K.; Liousse, C.; Eric-michel, A.; Veronique, Y.; Thierno, D.; Roblou, L.; Toure, E. N.; Julien, B.

2015-12-01

Fossil fuel and biofuel emissions of gases and particles in Africa are expected to significantly increase in the near future, particularly due to the growth of African cities. In addition, African large savannah fires occur each year during the dry season, mainly for socio-economical purposes. In this study, we will present the most recent developments of African anthropogenic combustion emission inventories, stressing African specificities. (1)A regional fossil fuel and biofuel inventory for gases and particulates will be presented for Africa at a resolution of 0.25° x 0.25° from 1990 to 2012. For this purpose, the original database of Liousse et al. (2014) has been used after modification for emission factors and for updated regional fuel consumption including new emitter categories (waste burning, flaring) and new activity sectors (i.e. disaggregation of transport into sub-sectors including two wheel ). In terms of emission factors, new measured values will be presented and compared to litterature with a focus on aerosols. They result from measurement campaigns organized in the frame of DACCIWA European program for each kind of African specific anthropogenic sources in 2015, in Abidjan (Ivory Coast), Cotonou (Benin) and in Laboratoire d'Aérologie combustion chamber. Finally, a more detailed spatial distribution of emissions will be proposed at a country level to better take into account road distributions and population densities. (2) Large uncertainties still remain in biomass burning emission inventories estimates, especially over Africa between different datasets such as GFED and AMMABB. Sensitivity tests will be presented to investigate uncertainties in the emission inventories, applying methodologies used for AMMABB and GFED inventories respectively. Then, the relative importance of each sources (fossil fuel, biofuel and biomass burning inventories) on the budgets of carbon monoxide, nitrogen oxides, sulfur dioxide, black and organic carbon, and volatile

Validation of the ORIGEN-S code for predicting radionuclide inventories in used CANDU fuel

International Nuclear Information System (INIS)

Tait, J.C.; Gauld, I.; Kerr, A.H.

1995-01-01

The safety assessment being conducted by AECL Research for the concept of deep geological disposal of used CANDU UO 2 fuel requires the calculation of radionuclide inventories in the fuel to provide source terms for radionuclide release. This report discusses the validation of selected actinide and fission-product inventories calculated using the ORIGEN-S code coupled with the WIMS-AECL lattice code, using data from analytical measurements of radioisotope inventories in Pickering CANDU reactor fuel. The recent processing of new ENDF/B-VI cross-section data has allowed the ORIGEN-S calculations to be performed using the most up-to-date nuclear data available. The results indicate that the code is reliably predicting actinide and the majority of fission-product inventories to within the analytical uncertainty. ((orig.))

Inventory Control System by Using Vendor Managed Inventory (VMI)

OpenAIRE

Dona Sabila Alzena; Mustafid Mustafid; Suryono Suryono

2018-01-01

The inventory control system has a strategic role for the business in managing inventory operations. Management of conventional inventory creates problems in the stock of goods that often runs into vacancies and excess goods at the retail level. This study aims to build inventory control system that can maintain the stability of goods availability at the retail level. The implementation of Vendor Managed Inventory (VMI) method on inventory control system provides transparency of sales data an...

An ORIGEN-2 update for PCs and mainframes

International Nuclear Information System (INIS)

Ludwig, S.B.

1992-01-01

This paper reports that an updated version of the ORIGEN2 code package has been prepared by Oak Ridge National Laboratory. ORIGEN2 is used extensively by the DOE office of Civilian Radioactive Waste Management (OCRWM) and its contractors to determine the characteristics of spent fuel and high-level radioactive waste due to irradiation, decay, and processing. Included in this update are revised ORIGEN2 cross-section libraries for standard- and extended-burnup PWRs and BWRs. This update also includes improvements to the ORIGEN2 computer code (designated as ORIGEN2, Version 2.1 8-1-91 release). This version of ORIGEN2 provides a single source code that may be executed on both mainframes and 80386 or 80486 PCs, effectively smashing the 640 KB barrier that limited previous PC implementations

Purchasing and inventory management techniques for optimizing inventory investment

International Nuclear Information System (INIS)

McFarlane, I.; Gehshan, T.

1993-01-01

In an effort to reduce operations and maintenance costs among nuclear plants, many utilities are taking a closer look at their inventory investment. Various approaches for inventory reduction have been used and discussed, but these approaches are often limited to an inventory management perspective. Interaction with purchasing and planning personnel to reduce inventory investment is a necessity in utility efforts to become more cost competitive. This paper addresses the activities that purchasing and inventory management personnel should conduct in an effort to optimize inventory investment while maintaining service-level goals. Other functions within a materials management organization, such as the warehousing and investment recovery functions, can contribute to optimizing inventory investment. However, these are not addressed in this paper because their contributions often come after inventory management and purchasing decisions have been made

Update History of This Database - Yeast Interacting Proteins Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Yeast Interacting Proteins Database Update History of This Database Date Update contents 201...0/03/29 Yeast Interacting Proteins Database English archive site is opened. 2000/12/4 Yeast Interacting Proteins Database...( http://itolab.cb.k.u-tokyo.ac.jp/Y2H/ ) is released. About This Database Database Description... Download License Update History of This Database Site Policy | Contact Us Update History of This Database... - Yeast Interacting Proteins Database | LSDB Archive ...

Measurement of gap and grain-boundary inventories of 129I in used CANDU fuels

International Nuclear Information System (INIS)

Stroes-Gascoyne, S.; Moir, D.L.; Kolar, M.; Porth, R.J.; McConnell, J.L.; Kerr, A.H.

1995-01-01

Combined gap and grain-boundary inventories of 129 I in 14 used CANDU fuel elements were measured by crushing and simultaneously leaching fuel segments for 4 h in a solution containing KI carrier. From analogy with previous work a near one-to-one correlation was anticipated between the amount of stable Xe and the amount of 128 I in the combined gap and grain-boundary regions of the fuel. However, the results showed that such a correlation was only apparent for low linear power rating (LLPR) fuels with an average linear power rating of 44 kW/m), the 129 I values were considerably smaller than expected. The combined gap and grain-boundary inventories of 129 I in the 14 fuels tested varied from 1.8 to 11.0%, with an average value of 3.6 ± 2.4% which suggests that the average value of 8.1 ± 1% used in safety assessment calculations overestimates the instant release fraction for 129 I. Segments of used CANDU fuels were leached for 92 d (samples taken at 5, 28 and 92 d) to determine the kinetics of 129 I release. Results could be fitted tentatively to half-order reaction kinetics, implying that 129 I release is a diffusion-controlled process for LLPR fuels, and also for HLPR fuels, once the gap inventory has been leached. However, more data are needed over longer leaching periods to gain more understanding of the processes that control grain-boundary release of 129 I from used CANDU fuel

Update photovoltaics in view of Ecoinvent data V2.0

Energy Technology Data Exchange (ETDEWEB)

Jungbluth, N.; Tuchschmid, M.

2007-12-15

This final report for the Swiss Federal Office of Energy (SFOE) reports on the updating of the Ecoinvent database on behalf of the European Photovoltaics Industry Association and the Swiss Federal Office of Energy. In this project, data has been collected directly from manufacturers and research projects. Life-Cycle Analyses (LCA) made by various authors have been considered for the assessment. The information was used to elaborate life cycle inventories for electricity production using photovoltaics in grid-connected, 3 kWp plants in the year 2005. The inventories cover monocrystalline and polycrystalline cells, amorphous and ribbon-silicon, CdTe and CIS thin-film cells. The environmental impact caused by infrastructure at all stages of production and the effluents from wafer production are also considered. The Ecoinvent V2.0 data is used as a background data-base. The report investigates the LCA inventories for photovoltaics, comparing different types of cells used in Switzerland and also analyses the electricity production in different countries. The report also discusses how the environmental impact of photovoltaics has been reduced over the last 15 years.

EPICS release 3.11.6 specific documentation -- Release notes for EPICS 3.11.6

International Nuclear Information System (INIS)

1994-01-01

These notes cover the following: (1) directions for switching to production APS release R3.11.6; (2) unbundling of channel access clients; (3) access security; (4) channel access additions; synchronous time support; and (5) description of major differences between R3.11.3 and R3.11.6 Also included is a list of new and/or updated documentation for the program

Optimization of Inventory

OpenAIRE

PROKOPOVÁ, Nikola

2017-01-01

The subject of this thesis is optimization of inventory in selected organization. Inventory optimization is a very important topic in each organization because it reduces storage costs. At the beginning the inventory theory is presented. It shows the meaning and types of inventory, inventory control and also different methods and models of inventory control. Inventory optimization in the enterprise can be reached by using models of inventory control. In the second part the company on which is...

A user's guide to the reactor inventory module NECTAR-RICE

International Nuclear Information System (INIS)

Barker, C.D.

1982-01-01

The NECTAR environmental computer code has been developed to meet the increasing demand for comprehensive calculations of the radiological consequences of the atmosphere release of radionuclides from a nuclear facility. The code consists of a main control program, library listing/modification routines and five calculational modules. The input data required for the reactor inventory module NECTAR-RICE is described. This data includes facilities for specifying the initial conditions, controlling the irradiation conditions of the fuel and for temporarily modifying library data at different stages of the calculation. The structure of the module is briefly described and three sample cases are given to facilitate understanding of the program's use and program testing. These sample cases demonstrate the three different ways of running the program, namely to calculate actinide inventories only, fission product inventories only or to do a composite actinide and fission product calculation. (author)

An expert system for spare parts inventory control

International Nuclear Information System (INIS)

Kim, K.Y.; Chen, P.Y.C.; Okrent, D.

1987-01-01

This paper describes an expert system which can handle spare part requirements not only in corrective maintenance (CM) or preventive maintenance (PM), but also when failure rates of components or parts are updated by new data or by predictive maintenance (PDM), and which can also decide optimum stocking level of each spare part. This expert system provides a maintenance (or inventory) manager with an improved basis for decision making in the maintenance related to spare parts. The definitions of PM and PDM from NUREG-1212 (USNRC 1986) are used herein. This expert system used Intellignece/Compiler (Intelligence Ware, 1986) as a language/tool in the IBM-PC

Validation of the ORIGEN-S code for predicting radionuclide inventories in used CANDU Fuel

International Nuclear Information System (INIS)

Tait, J.C.; Gauld, I.; Kerr, A.H.

1994-10-01

The safety assessment being conducted by AECL Research for the concept of deep geological disposal of used CANDU UO 2 fuel requires the calculation of radionuclide inventories in the fuel to provide source terms for radionuclide release. This report discusses the validation of selected actinide and fission-product inventories calculated using the ORIGEN-S code coupled with the WIMS-AECL lattice code, using data from analytical measurements of radioisotope inventories in Pickering CANDU reactor fuel. The recent processing of new ENDF/B-VI cross-section data has allowed the ORIGEN-S calculations to be performed using the most up-to-date nuclear data available. The results indicate that the code is reliably predicting actinide and the majority of fission-product inventories to within the analytical uncertainty. 38 refs., 4 figs., 5 tabs

1999 Leak Detection, Monitoring, and Mitigation Strategy Update

International Nuclear Information System (INIS)

OHL, P.C.

1999-01-01

This document is a complete revision of WHC-SD-WM-ES-378, Rev 1. This update includes recent developments in Leak Detection, Leak Monitoring, and Leak Mitigation technologies, as well as, recent developments in single-shell tank retrieval technologies. In addition, a single-shell tank retrieval release protection strategy is presented

The Impact of Pollution Prevention on Toxic Environmental Releases from U.S. Manufacturing Facilities.

Science.gov (United States)

Ranson, Matthew; Cox, Brendan; Keenan, Cheryl; Teitelbaum, Daniel

2015-11-03

Between 1991 and 2012, the facilities that reported to the U.S. Environmental Protection Agency's Toxic Release Inventory (TRI) Program conducted 370,000 source reduction projects. We use this data set to conduct the first quasi-experimental retrospective evaluation of how implementing a source reduction (pollution prevention) project affects the quantity of toxic chemicals released to the environment by an average industrial facility. We use a differences-in-differences methodology, which measures how implementing a source reduction project affects a facility's releases of targeted chemicals, relative to releases of (a) other untargeted chemicals from the same facility, or (b) the same chemical from other facilities in the same industry. We find that the average source reduction project causes a 9-16% decrease in releases of targeted chemicals in the year of implementation. Source reduction techniques vary in effectiveness: for example, raw material modification causes a large decrease in releases, while inventory control has no detectable effect. Our analysis suggests that in aggregate, the source reduction projects carried out in the U.S. since 1991 have prevented between 5 and 14 billion pounds of toxic releases.

Geometric Programming Approach to an Interactive Fuzzy Inventory Problem

Directory of Open Access Journals (Sweden)

Nirmal Kumar Mandal

2011-01-01

Full Text Available An interactive multiobjective fuzzy inventory problem with two resource constraints is presented in this paper. The cost parameters and index parameters, the storage space, the budgetary cost, and the objective and constraint goals are imprecise in nature. These parameters and objective goals are quantified by linear/nonlinear membership functions. A compromise solution is obtained by geometric programming method. If the decision maker is not satisfied with this result, he/she may try to update the current solution to his/her satisfactory solution. In this way we implement man-machine interactive procedure to solve the problem through geometric programming method.

Joint inventory control and pricing in a service-inventory system

DEFF Research Database (Denmark)

Marand, Ata Jalili; Li, Hongyan Jenny; Thorstenson, Anders

2017-01-01

This study addresses joint inventory control and pricing decisions for a service-inventory system. In such a system both an on-hand inventory item and a positive service time are required to fulfill customer demands. The service-inventory system also captures main features of the classical...... inventory systems with a positive processing time, e.g., make-to-order systems. In this study, the service-inventory system is modeled as an M/M/1 queue in which the customer arrival rate is price dependent. The inventory of an individual item is continuously reviewed under an (r,Q) policy....... The replenishment lead times of the inventory are exponentially distributed. Furthermore, customers arriving during stock-out periods are lost. The stochastic customer inter-arrival times, service times, and inventory replenishment lead times cause the high complexity of the problem and the difficulty in solving it...

Tritium inventory measurements using calorimetry

International Nuclear Information System (INIS)

Kapulla, H.; Kraemer, R.; Heine, R.

1992-01-01

In the past calorimetry has been developed as a powerful tool in radiometrology. Calorimetric methods have been applied for the determination of activities, half lives and mean energies released during the disintegration of radioactive isotopes. The fundamental factors and relations which determine the power output of radioactive samples are presented and some basic calorimeter principles are discussed in this paper. At the Kernforschungszentrum Karlsruhe (KfK) a family of 3 calorimeters has been developed to measure the energy release from radiative waste products arising from reprocessing operations. With these calorimeters, radiative samples with sizes from a few cm 3 to 2 ·10 5 cm 3 and heat ratings ranging from a few nW to kW can be measured. After modifications of tits inner part the most sensitive calorimeter among the three calorimeters mentioned above would be best suited for measuring the tritium inventory in T-getters of the Amersham-type

Calculations in support of a potential definition of large release

International Nuclear Information System (INIS)

Hanson, A.L.; Davis, R.E.; Mubayi, V.

1994-05-01

The Nuclear Regulatory Commission has stated a hierarchy of safety goals with the qualitative safety goals as Level I of the hierarchy, backed up by the quantitative health objectives as Level II and the large release guideline as Level III. The large release guideline has been stated in qualitative terms as a magnitude of release of the core inventory whose frequency should not exceed 10 -6 per reactor year. However, the Commission did not provide a quantitative specification of a large release. This report describes various specifications of a large release and focuses, in particular, on an examination of releases which have a potential to lead to one prompt fatality in the mean. The basic information required to set up the calculations was derived from the simplified source terms which were obtained from approximations of the NUREG-1150 source terms. Since the calculation of consequences is affected by a large number of assumptions, a generic site with a (conservatively determined) population density and meteorology was specified. At this site, various emergency responses (including no response) were assumed based on information derived from earlier studies. For each of the emergency response assumptions, a set of calculations were performed with the simplified source terms; these included adjustments to the source terms, such as the timing of the release, the core inventory, and the release fractions of different radionuclides, to arrive at a result of one mean prompt fatality in each case. Each of the source terms, so defined, has the potential to be a candidate for a large release. The calculations show that there are many possible candidate source terms for a large release depending on the characteristics which are felt to be important

Fission Product Release Behavior of Individual Coated Fuel Particles for High-Temperature Gas-Cooled Reactors

International Nuclear Information System (INIS)

Minato, Kazuo; Sawa, Kazuhiro; Koya, Toshio; Tomita, Takeshi; Ishikawa, Akiyoshi; Baldwin, Charles A.; Gabbard, William Alexander; Malone, Charlie M.

2000-01-01

Postirradiation heating tests of TRISO-coated UO 2 particles at 1700 and 1800degC were performed to understand fission product release behavior at accident temperatures. The inventory measurements of the individual particles were carried out before and after the heating tests with gamma-ray spectrometry to study the behavior of the individual particles. The time-dependent release behavior of 85 Kr, 110m Ag, 134 Cs, 137 Cs, and 154 Eu were obtained with on-line measurements of fission gas release and intermittent measurements of metallic fission product release during the heating tests. The inventory measurements of the individual particles revealed that fission product release behavior of the individual particles was not uniform, and large particle-to-particle variations in the release behavior of 110m Ag, 134 Cs, 137 Cs, and 154 Eu were found. X-ray microradiography and ceramography showed that the variations could not be explained by only the presence or absence of cracks in the SiC coating layer. The SiC degradation may have been related to the variations

Canadian pollutant releases and transfers : NPRI data 1998

International Nuclear Information System (INIS)

2001-03-01

A large, two-sided fold-out poster showing pollution hotspots throughout Canada, has been released by the Canadian Institute for Environmental Law and Policy (CIELAP). The poster is based on the maps and tables of the National Pollutant Release Inventory (NPRI) 1998. It presents the top on-site releases and off-site transfers of pollutants by facilities across Canada, and provides a summary of releases, transfers and recycling of pollutants by province. The map depicts the facilities with the five largest quantities of individual pollutants released to each medium, i. e. water, air, land, underground. The crude oil and gas, other utilities, primary metal, paper and chemical industrial sectors are responsible for the largest on-site releases, while the business services, fabricated metal. primary metal and chemical industrial sectors account for the largest off-site transfers. Twenty-five of the 176 substances whose releases and transfers are reported under the NPRI are classified as 'toxic' or 'carcinogenic'. tabs., maps

LOFC fission product release and circulating activity calculations for gas-cooled reactors

International Nuclear Information System (INIS)

Apperson, C.E. Jr.; Carruthers, L.M.; Lee, C.E.

1977-01-01

The inventories of fission products in a gas-cooled reactor under accident and normal steady state conditions are time and temperature dependent. To obtain a reasonable estimate of these inventories it is necessary to consider fuel failure, a temperature dependent variable, and radioactive decay, a time dependent variable. Using arbitrary radioactive decay chains and published fuel failure models for the High Temperature Gas-Cooled Reactor (HTGR), methods have been developed to evaluate the release of fission products during the Loss of Forced Circulation (LOFC) accident and the circulating and plateout fission product inventories during steady state non-accident operation. The LARC-2 model presented here neglects the time delays in the release from the HTGR due to diffusion of fission products from particles in the fuel rod through the graphite matrix. It also neglects the adsorption and evaporation process of metallics at the fuel rod-graphite and graphite-coolant hole interfaces. Any time delay due to the finite time of transport of fission products by convection through the coolant to the outside of the prestressed concrete reactor vessel (PCRV) is also neglected. This model assumes that all fission products released from fuel particles are immediately deposited outside the PCRV with no time delay

ZZ ECN-BUBEBO, ECN-Petten Burnup Benchmark Book, Inventories, Afterheat

International Nuclear Information System (INIS)

Kloosterman, Jan Leen

1999-01-01

Description of program or function: Contains experimental benchmarks which can be used for the validation of burnup code systems and accompanied data libraries. Although the benchmarks presented here are thoroughly described in literature, it is in many cases not straightforward to retrieve unambiguously the correct input data and corresponding results from the benchmark Descriptions. Furthermore, results which can easily be measured, are sometimes difficult to calculate because of conversions to be made. Therefore, emphasis has been put to clarify the input of the benchmarks and to present the benchmark results in such a way that they can easily be calculated and compared. For more thorough Descriptions of the benchmarks themselves, the literature referred to here should be consulted. This benchmark book is divided in 11 chapters/files containing the following in text and tabular form: chapter 1: Introduction; chapter 2: Burnup Credit Criticality Benchmark Phase 1-B; chapter 3: Yankee-Rowe Core V Fuel Inventory Study; chapter 4: H.B. Robinson Unit 2 Fuel Inventory Study; chapter 5: Turkey Point Unit 3 Fuel Inventory Study; chapter 6: Turkey Point Unit 3 Afterheat Power Study; chapter 7: Dickens Benchmark on Fission Product Energy Release of U-235; chapter 8: Dickens Benchmark on Fission Product Energy Release of Pu-239; chapter 9: Yarnell Benchmark on Decay Heat Measurements of U-233; chapter 10: Yarnell Benchmark on Decay Heat Measurements of U-235; chapter 11: Yarnell Benchmark on Decay Heat Measurements of Pu-239

Energy and greenhouse gas inventories by local governments in BC : implications for the CEEI initiative

International Nuclear Information System (INIS)

Macdonald, R.

2007-01-01

The community energy and emissions inventory (CEEI) initiative has been undertaken through British Columbia's Ministry of Environment in order to establish a cost-effective, provincially-sponsored, rigorous, yet flexible, data collection, analysis and reporting system to provide local governments with energy-related and greenhouse gas inventory baselines, ongoing monitoring and periodic reports to help inform community decision making and support provincial objectives. This report described the CEEI initiative including background information, project objectives, and project methodology. The report also provided a review of community and corporate inventories and discussed the implications of various data and methodological issues for the CEEI initiative. This included reporting and updating issues; desired accuracy and frequency of community inventories; regular inventory generation; and implications for the development of indicators. The report concluded with a sampling of possible indicators, and the factors that affect their use. It was concluded that the characteristics of an ideal indicator for local action on climate change would be one that describes a condition or state of the urban or built environment representing the magnitude of emissions. It would also be one that is within the influence of local governments to affect and would be both measurable and affordable. 11 tabs., 2 appendices

Updated African biomass burning emission inventories in the framework of the AMMA-IDAF program, with an evaluation of combustion aerosols

Directory of Open Access Journals (Sweden)

C. Liousse

2010-10-01

Full Text Available African biomass burning emission inventories for gaseous and particulate species have been constructed at a resolution of 1 km by 1km with daily coverage for the 2000–2007 period. These inventories are higher than the GFED2 inventories, which are currently widely in use. Evaluation specifically focusing on combustion aerosol has been carried out with the ORISAM-TM4 global chemistry transport model which includes a detailed aerosol module. This paper compares modeled results with measurements of surface BC concentrations and scattering coefficients from the AMMA Enhanced Observations period, aerosol optical depths and single scattering albedo from AERONET sunphotometers, LIDAR vertical distributions of extinction coefficients as well as satellite data. Aerosol seasonal and interannual evolutions over the 2004–2007 period observed at regional scale and more specifically at the Djougou (Benin and Banizoumbou (Niger AMMA/IDAF sites are well reproduced by our global model, indicating that our biomass burning emission inventory appears reasonable.

Derivation of a radionuclide inventory for irradiated graphite-chlorine-36 inventory determination

International Nuclear Information System (INIS)

Brown, F.J.; Palmer, J.D.; Wood, P.

2001-01-01

fraction of the chlorine is released from the graphite during irradiation, both in natural precursor and activated form. The release rate of inactive chlorine and of chlorine-36 was modelled, to allow the calculation of a residual chlorine-36 inventory in operational and decommissioning wastes; actual measurements on operational wastes have confirmed this release. This has subsequently been used to assess the effect on disposal risks. This paper provides a description of the work undertaken by Nirex to establish the residual inventory of chlorine-36 in irradiated nuclear graphite, and outline the implications for disposal of these wastes. (author)

The release of fission products from uranium metal: a review

International Nuclear Information System (INIS)

Minshall, P.C.

1989-03-01

The literature on the release of fission products as gaseous species from irradiated uranium metal in oxidising atmospheres has been reviewed. Release of actinides and of fission products as spalled particulate were not considered. Data is given on the release in air, carbon dioxide, steam and mixtures of steam and air. The majority of data discussed lie between 800 and 1200 0 C though some results for xenon, krypton and iodine releases below 800 0 C are given. Two measures of fission product release are discussed: the release fraction, F(tot), which is the ratio of the total release to the initial inventory, and the fractional release, F(ox), which is the fraction released from the oxidised metal. The effect of burn-up, atmosphere and temperature on F(tot) and F(ox) is examined and the conditions under which the release fraction, F(tot) is proportional to the extent of oxidation discussed. (author)

The Danish (Q)SAR Database Update Project

DEFF Research Database (Denmark)

Nikolov, Nikolai Georgiev; Dybdahl, Marianne; Abildgaard Rosenberg, Sine

2013-01-01

The Danish (Q)SAR Database is a collection of predictions from quantitative structure–activity relationship ((Q)SAR) models for over 70 environmental and human health-related endpoints (covering biodegradation, metabolism, allergy, irritation, endocrine disruption, teratogenicity, mutagenicity......, carcinogenicity and others), each of them available for 185,000 organic substances. The database has been available online since 2005 (http://qsar.food.dtu.dk). A major update project for the Danish (Q)SAR database is under way, with a new online release planned in the beginning of 2015. The updated version...... will contain more than 600,000 discrete organic structures and new, more precise predictions for all endpoints, derived by consensus algorithms from a number of state-of-the-art individual predictions. Copyright © 2013 Published by Elsevier Ireland Ltd....

Inventory of Used, Disused, Waste and Disposed Sources in Kenya

Energy Technology Data Exchange (ETDEWEB)

Kiti, S; Keter, J [Radiation Protection Board (RPBI), Kisumu (Kenya); Kinyua, R [Jomo Kenyatta University of Agriculture and Technology (JKUAT), Thika (Kenya)

2010-09-15

Kenya is committed to the peaceful applications of sealed and unsealed radioactive sources in medicine, industry, agriculture and training and research in order to achieve socioeconomic development. There are 4 nuclear medicine centers, 3 industrial radiotherapy facilities, 2 gamma irradiator facilities, one linear accelerator, 2 high dose radiation (HDR) Brachytherapy units, 5 industrial radiography units and many training and research facilities in the country that posses radioactive sources. The Kenya Radiation Protection Board is a Regulatory body established under Cap 243 of the Laws of Kenya cited as the Radiation Protection Act which provides for the protection of the public and radiation workers from dangers arising from materials capable of producing ionizing radiation. The mission of the Board is to accelerate, regulate and expand the contribution of nuclear and irradiation technology to the Kenyan economy through promotion of nuclear and radiation safety culture. The use of radioactive material requires an adequate established inventory. The objective of this project is to establish and maintain a national inventory of sealed and unsealed radioactive sources in Kenya. A national inventory was done by sending a questionnaire and personal communication as well thorough countrywide inspection surveys by Radiation Protection Officers from the regulatory body where lead pot containers were carried in case of disposal of a disused source or spent source. Advanced survey meters and automes radiation meters were used for radiation safety work, alarm meters were used to detect the threshold and source identifiers were used to identify unknown sources and their activities. A total of 130 radioactive sources (34 used, 20 disused, 39 waste and 37 disposed) including their JPEG images were identified and a national inventory established. Co-60 recorded the highest activity of 11,000 Ci followed by Cs-137 with 400 Ci and Ir-192 with 40 Ci. An updated inventory for the

Applying inventory classification to a large inventory management system

Directory of Open Access Journals (Sweden)

Benjamin Isaac May

2017-06-01

Full Text Available Inventory classification aims to ensure that business-driving inventory items are efficiently managed in spite of constrained resources. There are numerous single- and multiple-criteria approaches to it. Our objective is to improve resource allocation to focus on items that can lead to high equipment availability. This concern is typical of many service industries such as military logistics, airlines, amusement parks and public works. Our study tests several inventory prioritization techniques and finds that a modified multi-criterion weighted non-linear optimization (WNO technique is a powerful approach for classifying inventory, outperforming traditional techniques of inventory prioritization such as ABC analysis in a variety of performance objectives.

Brief Report: Preliminary Evaluation of the Theory of Mind Inventory and Its Relationship to Measures of Social Skills

Science.gov (United States)

Lerner, Matthew D.; Hutchins, Tiffany L.; Prelock, Patricia A.

2011-01-01

This study presents updated information on a parent-report measure of Theory of Mind (ToM), formerly called the Perception of Children's Theory of Mind Measure (Hutchins et al., "J Autism Dev Disord" 38:143-155, 2008), renamed the Theory of Mind Inventory (ToMI), for use with parents of children with autism spectrum disorder (ASD). This study…

Fission Product Release from Spent Nuclear Fuel During Melting

International Nuclear Information System (INIS)

Howell, J.P.; Zino, J.F.

1998-09-01

The Melt-Dilute process consolidates aluminum-clad spent nuclear fuel by melting the fuel assemblies and diluting the 235U content with depleted uranium to lower the enrichment. During the process, radioactive fission products whose boiling points are near the proposed 850 degrees C melting temperature can be released. This paper presents a review of fission product release data from uranium-aluminum alloy fuel developed from Severe Accident studies. In addition, scoping calculations using the ORIGEN-S computer code were made to estimate the radioactive inventories in typical research reactor fuel as a function of burnup, initial enrichment, and reactor operating history and shutdown time.Ten elements were identified from the inventory with boiling points below or near the 850 degrees C reference melting temperature. The isotopes 137Cs and 85Kr were considered most important. This review serves as basic data to the design and development of a furnace off-gas system for containment of the volatile species

Transient fission-product release during reactor shutdown and startup

International Nuclear Information System (INIS)

Hunt, C.E.L.; Lewis, B.J.; Dickson, L.W.

1997-12-01

Sweep-gas experiments performed at AECL's Chalk River Laboratories from 1979 to 1985 have been further analysed to determine the fraction of the gaseous fission-product inventory that is released on reactor shutdown and startup. Empirical equations were derived and applied to calculate the stable xenon release from companion fuel elements and from a well-documented experimental fuel bundle irradiated in the NRU reactor. The calculated gas release could be matched to the measured values within about a factor of two for an experimental irradiation with a burnup of 217 MWh/kgU. There was also limited information on the fraction of the radioactive iodine that was exposed, but not released, on reactor shutdown. An empirical equation is proposed for calculating this fraction. (author)

Fission Product Release Behavior of Individual Coated Fuel Particles for High-Temperature Gas-Cooled Reactors

Energy Technology Data Exchange (ETDEWEB)

Minato, Kazuo [Japan Atomic Energy Research Institute (Japan); Sawa, Kazuhiro [Japan Atomic Energy Research Institute (Japan); Koya, Toshio [Japan Atomic Energy Research Institute (Japan); Tomita, Takeshi [Japan Atomic Energy Research Institute (Japan); Ishikawa, Akiyoshi [Japan Atomic Energy Research Institute (Japan); Baldwin, Charles A; Gabbard, William Alexander [Oak Ridge National Laboratory (United States); Malone, Charlie M [Oak Ridge National Laboratory (United States)

2000-07-15

Postirradiation heating tests of TRISO-coated UO{sub 2} particles at 1700 and 1800degC were performed to understand fission product release behavior at accident temperatures. The inventory measurements of the individual particles were carried out before and after the heating tests with gamma-ray spectrometry to study the behavior of the individual particles. The time-dependent release behavior of {sup 85}Kr, {sup 110m}Ag, {sup 134}Cs, {sup 137}Cs, and {sup 154}Eu were obtained with on-line measurements of fission gas release and intermittent measurements of metallic fission product release during the heating tests. The inventory measurements of the individual particles revealed that fission product release behavior of the individual particles was not uniform, and large particle-to-particle variations in the release behavior of {sup 110m}Ag, {sup 134}Cs, {sup 137}Cs, and {sup 154}Eu were found. X-ray microradiography and ceramography showed that the variations could not be explained by only the presence or absence of cracks in the SiC coating layer. The SiC degradation may have been related to the variations.

Update of the Unitarity Triangle Analysis

CERN Document Server

Bevan, A.J.; Ciuchini, M.; Derkach, D.; Stocchi, A.; Franco, E.; Silvestrini, L.; Lubicz, V.; Tarantino, Cecilia; Martinelli, G.; Parodi, F.; Schiavi, C.; Pierini, M.; Sordini, V.; Vagnoni, V.

2010-01-01

We present the status of the Unitarity Triangle Analysis (UTA), within the Standard Model (SM) and beyond, with experimental and theoretical inputs updated for the ICHEP 2010 conference. Within the SM, we find that the general consistency among all the constraints leaves space only to some tension (between the UTA prediction and the experimental measurement) in BR(B -> tau nu), sin(2 beta) and epsilon_K. In the UTA beyond the SM, we allow for New Physics (NP) effects in (Delta F)=2 processes. The hint of NP at the 2.9 sigma level in the B_s-\\bar B_s mixing turns out to be confirmed by the present update, which includes the new D0 result on the dimuon charge asymmetry but not the new CDF measurement of phi_s, being the likelihood not yet released.

RIMS [Records Inventory Management System] Handbook

International Nuclear Information System (INIS)

1989-03-01

The Records Inventory Management System (RIMS) is a computer library of abstracted documents relating to low-level radioactive waste. The documents are of interest to state governments, regional compacts, and the Department of Energy, especially as they relate to the Low-Level Radioactive Waste Policy Act requiring states or compacts of states to establish and operate waste disposal facilities. RIMS documents are primarily regulatory, policy, or technical documents, published by the various states and compacts of the United States; however, RIMS contains key international publications as well. The system has two sections: a document retrieval section and a document update section. The RIMS mainframe can be accessed through a PC or modem. Also, each state and compact may request a PC version of RIMS, which allows a user to enter documents off line and then upload the documents to the mainframe data base

Raw data from the Italian National Forest Inventory are on-line and publicly available

Directory of Open Access Journals (Sweden)

Borghetti M

2016-12-01

Full Text Available Raw data from the Italian National Forest Inventory are on-line and publicly available. The National Forest Service in cooperation with the Forest Monitoring and Management Research Unit of the Council for Agricultural Research and Economics (CREA released the raw data from the National Inventory of Forests and forest Carbon pools - INFC2005 project, the second Italian national forest inventory. Data are available together with metadata information at http://www.inventarioforestale.org/. Users, after registration, can download data from 230.874 living tree stems, 16.472 dead tree stems, 31.083 stumps, from a total of 7.272 field plots (for 1.384 of them additional data on fine woody debris and soil carbon pools are also available.

Expert systems applied to two problems in nuclear power plants

International Nuclear Information System (INIS)

Kim, K.Y.

1988-01-01

This dissertation describes two prototype expert systems applied to two problems in nuclear power plants. One problem is spare parts inventory control, and the other one is radionuclide release from containment during severe accident. The expert system for spare parts inventory control can handle spare parts requirements not only in corrective, preventive, or predictive maintenance, but also when failure rates of components or parts are updated by new data. Costs and benefits of spare parts inventory acquisition are evaluated with qualitative attributes such as spare part availability to provide the inventory manager with an improved basis for decision making. The expert system is implemented with Intelligence/Compiler on an IBM-AT. The other expert system for radionuclide release from containment can estimate magnitude, type, location, and time of release of radioactive materials from containment during a severe accident nearly on line, based on the actual measured physical parameters such as temperature and pressure inside the containment. The expert system has a function to check the validation of sensor data. The expert system is implemented with KEE on a Symbolics LISP machine

Inventory of Dutch National Research on Global Climate Change: Inside and outside the National Research Programme

International Nuclear Information System (INIS)

Smythe, K.D.; Bernabo, C.; Kingma, J.; Vrakking, W.

1993-04-01

This summary of Dutch research on global climate change was compiled from a survey of the major research organisations in the Netherlands. The scope and structure of the survey and this report were based on a request for information from the World Meteorological Organisation for an intergovernmental meeting on the World Climate Programme (WCP) held (from 14 to 16 April 1993). The WMO request emphasized activities related to the WCP and its associated programmes. To extend the usefulness of the exercise, an attempt has been made to broaden the focus to give additional attention to the Intergovernmental Geosphere-Biosphere Programme (IGBP) and the Human Dimensions Programme (HDP). This was the first attempt to inventory the research projects on global climate change underway in the Netherlands - both inside and outside the National Research Programme. Other surveys on Dutch climate-related research have been conducted. The most extensive effort was a cataloging of publications from climate research in the Netherlands from 1981 to 1991, which was conducted by the Netherlands Royal Academy of Sciences (KNAW). That inventory is being updated to include publications through 1992. The database resulting from this exercise will be a useful tool for organisations sponsoring and conducting global climate change research in their efforts to stimulate cooperation and promote coordination among research groups in the Netherlands and abroad. There are plans to update the inventory in the future and to provide the information to participating Dutch organisations as well as research organisations in other countries. An overview of the current research is provided in Volume 1 with a list of projects

Inventory parameters

CERN Document Server

Sharma, Sanjay

2017-01-01

This book provides a detailed overview of various parameters/factors involved in inventory analysis. It especially focuses on the assessment and modeling of basic inventory parameters, namely demand, procurement cost, cycle time, ordering cost, inventory carrying cost, inventory stock, stock out level, and stock out cost. In the context of economic lot size, it provides equations related to the optimum values. It also discusses why the optimum lot size and optimum total relevant cost are considered to be key decision variables, and uses numerous examples to explain each of these inventory parameters separately. Lastly, it provides detailed information on parameter estimation for different sectors/products. Written in a simple and lucid style, it offers a valuable resource for a broad readership, especially Master of Business Administration (MBA) students.

Assessment of radiological releases to the environment from a fusion reactor power plant

International Nuclear Information System (INIS)

Shank, K.E.; Oakes, T.W.; Easterly, C.E.

1978-05-01

This report summarizes the expected tritium and activation-product inventories and presents an assessment of the potential radiological releases from a fusion reactor power plant, hypothetically located at the Oak Ridge National Laboratory. Routine tritium releases and the resulting dose assessment are discussed. Uncertainties associated with the conversion of tritium gas to tritium oxide and the global tritium cycling are evaluated. The difficulties of estimating releases of activated materials and the subsequent dose commitment are reviewed

SSI and SKI's Review of SKB's Updated Final Safety Report for SFR 1. Review Report

International Nuclear Information System (INIS)

2003-10-01

previous safety assessments for SFR 1. The review committee particularly emphasises the high quality of the site-specific description prepared for the biosphere and biosphere evolution. Significant progress has also been made with respect to the basis for analyses of the inventory of radioactive substances and model descriptions for hydrogeology and near field transport. The safety assessment has also been updated with a modern system description and database for FEPs (features, events and processes). The requirements made on a repository and on the content and presentation of a safety report have been stipulated in the form of new regulations since permission was granted for the operation of SFR 1. The regulations stipulate that the consequences of radioactive releases are to be evaluated in relation to a risk criterion and that environmental impact must also be reported. In connection with the evaluation of SKB's new safety assessment, the authorities identified certain deviations in relation to the requirements of the new regulations. A significant deviation is that SSR 2001 lacks a thorough analysis which shows the impact of identified uncertainties on calculated future consequences. There are also deficiencies in the documentation which make it difficult to reproduce or judge the suitability of certain models and data, e.g. for the near field and biosphere. Confidence in SKB's risk assessment is also limited by the lack of clarity of the scenario descriptions. Furthermore, SKB has not convincingly shown that the assessment can be limited to 10,000 years. In the opinion of the review committee, the radionuclide inventory that SKB refers to as conservative, and which has been used as an assumption in the calculations, is beyond the limits of the present licence. In the case of the realistic inventory, there is adequate agreement with the licensed inventory. It cannot be excluded that the inventory of certain long-lived and significant radionuclides may be underestimated

JASPAR 2014: an extensively expanded and updated open-access database of transcription factor binding profiles.

Science.gov (United States)

Mathelier, Anthony; Zhao, Xiaobei; Zhang, Allen W; Parcy, François; Worsley-Hunt, Rebecca; Arenillas, David J; Buchman, Sorana; Chen, Chih-yu; Chou, Alice; Ienasescu, Hans; Lim, Jonathan; Shyr, Casper; Tan, Ge; Zhou, Michelle; Lenhard, Boris; Sandelin, Albin; Wasserman, Wyeth W

2014-01-01

JASPAR (http://jaspar.genereg.net) is the largest open-access database of matrix-based nucleotide profiles describing the binding preference of transcription factors from multiple species. The fifth major release greatly expands the heart of JASPAR-the JASPAR CORE subcollection, which contains curated, non-redundant profiles-with 135 new curated profiles (74 in vertebrates, 8 in Drosophila melanogaster, 10 in Caenorhabditis elegans and 43 in Arabidopsis thaliana; a 30% increase in total) and 43 older updated profiles (36 in vertebrates, 3 in D. melanogaster and 4 in A. thaliana; a 9% update in total). The new and updated profiles are mainly derived from published chromatin immunoprecipitation-seq experimental datasets. In addition, the web interface has been enhanced with advanced capabilities in browsing, searching and subsetting. Finally, the new JASPAR release is accompanied by a new BioPython package, a new R tool package and a new R/Bioconductor data package to facilitate access for both manual and automated methods.

Release Early, Release Often: Predicting Change in Versioned Knowledge Organization Systems on the Web

OpenAIRE

Meroño-Peñuela, Albert; Guéret, Christophe; Schlobach, Stefan

2015-01-01

The Semantic Web is built on top of Knowledge Organization Systems (KOS) (vocabularies, ontologies, concept schemes) that provide a structured, interoperable and distributed access to Linked Data on the Web. The maintenance of these KOS over time has produced a number of KOS version chains: subsequent unique version identifiers to unique states of a KOS. However, the release of new KOS versions pose challenges to both KOS publishers and users. For publishers, updating a KOS is a knowledge int...

Tower taxes or higher executive bonuses: How inventory valuation choices best exhibit us corporate governance failings

Directory of Open Access Journals (Sweden)

Kevin A. Diehl

2012-06-01

Full Text Available This research seeks to update and finally determine for the Fortune 500 whether the market values the inventory valuation choice of last-in, first-out (LIFO over first-in, first-out (FIFO as some signal of reporting and management quality. The market can adjust LIFO earnings to FIFO earnings. Thus, the only issue then is that companies choosing FIFO pay higher taxes, which shareowners should disfavor. Indeed, only 20 percent of the Fortune 500 utilize LIFO to value any inventory. However, after Spearman correlations and logistic regression, the research statistically significantly shows that investors are willing to give premiums on the price of stock for the choice of LIFO. Thus, companies should choose LIFO to reduce taxes and increase their stock prices.

Inventory of chemical releases of nuclear installations in the North-Cotentin

International Nuclear Information System (INIS)

2002-05-01

The nuclear installations concerned by this study are Cogema La Hague, the Flamanville nuclear power plant, the Manche plant and the National Navy of Cherbourg.The objective followed by the ' source term ' work group has consisted in counting and examining the whole of existing measures relative to the releases of chemical substances in the liquid and gaseous effluents. Then because of the lack of measures for the operation first years of installations, the work group has estimated the order of magnitude of these chemical releases (essentially for Cogema La Hague). This report presents a review of the literature looking at the background levels of chemicals in different environmental compartments: air, soil, plants and animals products. these values have been summarized here to be available for comparisons with concentrations input by the North Cotentin nuclear installations, calculated by the G.R.N.C. (radioecology group of Nord Cotentin)

Forest inventory in Myanmar

Energy Technology Data Exchange (ETDEWEB)

Bo, Sit [Forest Resource Div., Forest Department (Myanmar)

1993-10-01

Forest inventory in Myanmar started in 1850s. Up till 1975, Myanmar Forest Department conducted forest inventories covering approximately one forest division every year. The National Forest Survey and Inventory Project funded by UNDP and assisted by FAO commenced in 1981 and the National Forest Management and Inventory project followed in 1986. Up till end March 1993, pre-investment inventory has covered 26.7 million acres, reconnaissance inventory 5.4 million acres and management inventory has carried out in 12 townships

Forest inventory in Myanmar

International Nuclear Information System (INIS)

Sit Bo

1993-01-01

Forest inventory in Myanmar started in 1850s. Up till 1975, Myanmar Forest Department conducted forest inventories covering approximately one forest division every year. The National Forest Survey and Inventory Project funded by UNDP and assisted by FAO commenced in 1981 and the National Forest Management and Inventory project followed in 1986. Up till end March 1993, pre-investment inventory has covered 26.7 million acres, reconnaissance inventory 5.4 million acres and management inventory has carried out in 12 townships

Development and improvement of historical emission inventory in Asia

Science.gov (United States)

Kurokawa, J. I.; Yumimoto, K.; Itahashi, S.; Maki, T.; Nagashima, T.; Ohara, T.

2016-12-01

Due to the rapid growth of economy and population, Asia becomes the largest emitter regions of air pollutants and greenhouse gases in the world. To tackle this problem, it is essential to understand the current status and past trend and to estimate effectiveness of mitigation measures using monitoring data, air quality and climate models, and emission inventories. We developed a historical emission inventory in Asia for 1950-2010 base on Regional Emission Inventory in ASia (REAS) version 2. In these 6 decades, emissions of all species in Asia showed remarkable increases. Recently, the largest emitter country in Asia is China. However, in 1960s, Japan is the largest emitter country for SO2 till about 1970 and NOx till about 1980, respectively. We surveyed effectiveness of abatement measures on NOx emissions in Japan and China. In Japan, the largest effective mitigation measure is regulation for motor vehicles. In 2010, reduced amounts of NOx emissions were estimated to be 2.7 time larger than actual emissions. For China, until 2010, the most effective mitigation measure is low-NOx burner installed in power plants. Regulation of motor vehicles also assumed to reduce NOx emissions from road transport by 40% compared to those without regulations in 2010. We roughly expanded the period of NOx emissions in China and Japan till 2012 and trend between 2008 and 2012 were compared with top-down emissions estimated using inverse modeling technique and satellite observations. Compared to top-down emissions, trends of the bottom-up emissions in China (Japan) overestimated increased (decreased) ratios in 2008-2012. For China, our emissions seem to underestimate the penetration rates of FGD for NOx installed in power plants. On the other hand, decreased rates of NOx emission factors for road vehicles in Japan might be overestimated in our emissions. These differences will be reconsidered to update our bottom-up emission inventory.

Estimation of global inventories of radioactive waste and other radioactive materials

International Nuclear Information System (INIS)

2008-06-01

A variety of nuclear activities have been carried out in the second part of the twentieth century for different purposes. Initially the emphasis was on military applications, but with the passage of time the main focus of nuclear activities has shifted to peaceful uses of nuclear energy and to the use of radioactive material in industry, medicine and research. Regardless of the objectives, the nuclear activities generate radioactive waste. It was considered worthwhile to produce a set of worldwide data that could be assessed to evaluate the legacy of the nuclear activities performed up to the transition between the twentieth and the twenty first century. The assessment tries to cover the inventory of all the human produced radioactive material that can be considered to result from both military and civilian applications. This has caused remarkable difficulties since much of the data, particularly relating to military programmes, are not readily available. Consequently the data on the inventory of radioactive material should be considered as order-of-magnitude approximations. This report as a whole should be considered as a first iteration in a continuing process of updating and upgrading. The accumulations of radioactive materials can be considered a burden for human society, both at present and in the future, since they require continuing monitoring and control. Knowing the amounts and types of such radioactive inventories can help in the assessment of the relative burdens. Knowledge of the national or regional radioactive waste inventory is necessary for planning management operations, including the sizing and design of conditioning, storage and disposal facilities. A global inventory, either of radioactive waste or of other environmental accumulations of radioactive material, could be used to provide a perspective on the requirements and burdens associated with their management, by means of comparisons with the burdens caused by other types of waste or other

Environmental releases for calendar year 1994

International Nuclear Information System (INIS)

Gleckler, B.P.

1995-07-01

This report fulfills the annual environmental release reporting requirements of US Department of Energy (DOE) Orders. This report provides supplemental information to the Hanford Site Environmental Report. The Hanford Site Environmental Report provides an update on the environmental status of the entire Hanford Site. The sitewide annual report summarizes the degree of compliance of the Hanford Site with applicable environmental regulations and informs the public about the impact of Hanford operations on the surrounding environment. Like the Hanford Site Environmental Report, this annual report presents a summary of the environmental releases from facilities managed by the Westinghouse Hanford Company (WHC) and monitored by Bechtel Hanford, Incorporated (BHI). In addition to the summary data, this report also includes detailed data on air emissions, liquid effluents, and hazardous substances released to the environment during calendar year 1994 from these facilities

The impact of turn around time in Brazilian Navy inventories

OpenAIRE

Casagrande, Mauricio

2000-01-01

Approved for public release; distribution is unlimited. This thesis analyzes how the operation of helicopters produced and supported by manufacturers in various countries affect Brazilian Navy repairable inventories levels and costs. The research is based on a scenario where the Brazilian Navy operates 68 helicopters, manufactured by contractors in USA, France, England and Italy, and the Brazilian Navy relies on these manufacturers for depot-level maintenance. We develop a simulation model...

A calculation code for estimating the global inventory of tritium from the ICSI Pilot Installation

International Nuclear Information System (INIS)

Pavelescu, Alexandru Octavian; Prisecaru, Ilie; Stefanescu, Ioan

2007-01-01

The paper describes the TRITINV program which performs a global updating of the total tritium inventory within the whole ICSI heavy water detritiation installation. The calculation does not take into account the distribution or the type of the tritium inventory on the installation modules. The program stores all the values submitted by user or computed, into a database which is permanently upgraded. It can also create charts based on its data and print or export this data in other formats. The application has been successfully tested and responded well to the initial requirements. It can be modified or improved anytime using the Microsoft Access 2003 Program. An important advancement would consist in upgrading the TRITINV into a stand-alone application by editing and compiling it in Microsoft Visual Studio 2005. (authors)

Inventory of U.S. 2012 dioxin emissions to atmosphere.

Science.gov (United States)

Dwyer, Henri; Themelis, Nickolas J

2015-12-01

In 2006, the U.S. EPA published an inventory of dioxin emissions for the U.S. covering the period from 1987-2000. This paper is an updated inventory of all U.S. dioxin emissions to the atmosphere in the year 2012. The sources of emissions of polychlorinated dibenzodioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), collectively referred to in this paper as "dioxins", were separated into two classes: controlled industrial and open burning sources. Controlled source emissions decreased 95.5% from 14.0 kg TEQ in 1987 to 0.6 kg in 2012. Open burning source emissions increased from 2.3 kg TEQ in 1987 to 2.9 kg in 2012. The 2012 dioxin emissions from 53 U.S. waste-to-energy (WTE) power plants were compiled on the basis of detailed data obtained from the two major U.S. WTE companies, representing 84% of the total MSW combusted (27.4 million metric tons). The dioxin emissions of all U.S. WTE plants in 2012 were 3.4 g TEQ and represented 0.54% of the controlled industrial dioxin emissions, and 0.09% of all dioxin emissions from controlled and open burning sources. Copyright © 2015. Published by Elsevier Ltd.

Interactive Inventory Monitoring

Science.gov (United States)

Garud, Sumedha

2013-01-01

Method and system for monitoring present location and/or present status of a target inventory item, where the inventory items are located on one or more inventory shelves or other inventory receptacles that communicate with an inventory base station through use of responders such as RFIDs. A user operates a hand held interrogation and display (lAD) module that communicates with, or is part of the base station to provide an initial inquiry. lnformation on location(s) of the larget invenlory item is also indicated visibly and/or audibly on the receptacle(s) for the user. Status information includes an assessment of operation readiness and a time, if known, that the specified inventory item or class was last removed or examined or modified. Presentation of a user access level may be required for access to the target inventgory item. Another embodiment provides inventory informatin for a stack as a sight-impaired or hearing-impaired person adjacent to that stack.

Measurements of instant-release source terms for 137Cs, 90Sr, 99Tc, 129I and 14C in used CANDU fuels

International Nuclear Information System (INIS)

Stroes-Gascoyne, S.

1996-01-01

Combined gap and grain-boundary inventories of 137 Cs, 129 I, 90 Sr, 99 Tc and 14 C were measured in 15 used CANDU fuel elements by leaching crushed fuel samples. A good correlation between the combined gap and grain-boundary inventories of 137 Cs and 129 I was found, suggesting that these fission products exhibit similar behavior in CANDU fuel. The expected correlation between combined gap and grain-boundary inventories of 137 Cs and 129 I with calculated fission-gas release to the gap and grain boundaries could only be confirmed for lower power fuels ( 90 Sr were higher than expected and showed no correlation with calculated fission-gas release. No values for the combined gap and grain-boundary inventories of 99 Tc were obtained because 99 Tc in used fuel samples is very insoluble and appears to require oxidation prior to dissolution. Combined gap and grain-boundary inventories of 14 C appeared to be independent of fuel power or burnup. (orig.)

Tritium recovery from fusion blankets using solid lithium compounds. I. Design and minimization of tritium inventory

International Nuclear Information System (INIS)

Powell, J.R.

1975-01-01

Tritium blanket inventories of 100 curies/MW(e) are readily achievable, and inventories as low as 10 curies/MW(e) are possible for blankets with small lithium compound particulates (less than or equal to 50μ) at T greater than or equal to 800 0 C. Of the three release modes [A - to the main coolant (e.g., He) stream; B - to a separate processing circuit; and C - to the plasma region], mode A appears optimum for blankets using gas-cooled metallic structures (e.g., Al, stainless), while mode C appears optimum for high temperature refractory (e.g., C, SiC) structures. The greater structural complexity of mode B makes it less attractive than modes A and C. No recovery method is required for mode C release. With mode A release, tritium inventory in the coolant circuits ranges from 1 to 10 curies/MW(e), depending on processing parameters. Tritium leak rates to the environment during normal operation can be kept to less than or equal to 10 -3 curies/MW(e) per day with low permeability barriers. In general, a mixture of T 2 and T 2 O is present in the coolant stream. Three methods of tritium recovery are examined: (1) Conversion to T 2 followed by absorption in a metal hydride bed. (2) Conversion to T 2 followed by condensation at approximately 6 0 K. (3) Conversion to T 2 O followed by condensation at approximately 100 0 K

Estimate of radionuclide release characteristics into containment under severe accident conditions

International Nuclear Information System (INIS)

Nourbakhsh, H.P.

1993-11-01

A detailed review of the available light water reactor source term information is presented as a technical basis for development of updated source terms into the containment under severe accident conditions. Simplified estimates of radionuclide release and transport characteristics are specified for each unique combination of the reactor coolant and containment system combinations. A quantitative uncertainty analysis in the release to the containment using NUREG-1150 methodology is also presented

Fission product release from high gap-inventory LWR fuel under LOCA conditions

International Nuclear Information System (INIS)

Lorenz, R.A.; Collins, J.L.; Osborne, M.F.; Malinauskas, A.P.

1980-01-01

Fission product release tests were performed with light water reactor (LWR) fuel rod segments containing large amounts of cesium and iodine in the pellet-to-cladding gap space in order to check the validity of the previously published Source Term Model for this type of fuel. The model describes the release of fission product cesium and iodine from LWR fuel rods for controlled loss-of-coolant accident (LOCA) transients in the temperature range 500 to 1200 0 C. The basis for the model was test data obtained with simulated fuel rods and commercial fuel irradiated to high burnup but containing relatively small amounts of cesium and iodine in the pellet-to-cladding gap space

Inventory of alien marine species of Cyprus (2009

Directory of Open Access Journals (Sweden)

S. KATSANEVAKIS

2009-12-01

Full Text Available An updated inventory of alien marine species from coastal and offshore waters of Cyprus is presented. Records were compiled based on the existing scientific and grey literature, including HCMR database of Mediterranean alien species, technical reports, scientific congresses, academic dissertations, and websites, as well as on unpublished/personal observations. The listed species were classified in one of five categories: established, invasive, casual, cryptogenic, and questionable. The mode of introduction and the year of first sighting were also reported for each species. Eight new records based on personal observations of the authors were reported (Chondria coerulescens, Neosiphonia sphaerocarpa, Enchelycore anatina, Lagocephalus spadiceus, Lagocephalus suezensis, Scomberomorus commerson, Sillago sihama, and Sphoeroides pachygaster. Nine species, previously reported as aliens in Cypriot waters, were excluded from the inventory for various reasons. Ten established species were characterized as invasive (Caulerpa racemosa var. cylindracea, Cerithium scabridum, Strombus persicus, Trochus erythraeus, Brachidontes pharaonis, Pinctada radiata, Fistularia commersonii, Lagocephalus sceleratus, Siganus luridus, and Siganus rivulatus as they have a substantial impact on biodiversity and/or local economy. The impact of alien marine species in Cyprus is expected to grow in the close future, and further effort directed towards recording alien invasions and their impact will be needed.

JASPAR 2016: a major expansion and update of the open-access database of transcription factor binding profiles.

Science.gov (United States)

Mathelier, Anthony; Fornes, Oriol; Arenillas, David J; Chen, Chih-Yu; Denay, Grégoire; Lee, Jessica; Shi, Wenqiang; Shyr, Casper; Tan, Ge; Worsley-Hunt, Rebecca; Zhang, Allen W; Parcy, François; Lenhard, Boris; Sandelin, Albin; Wasserman, Wyeth W

2016-01-04

JASPAR (http://jaspar.genereg.net) is an open-access database storing curated, non-redundant transcription factor (TF) binding profiles representing transcription factor binding preferences as position frequency matrices for multiple species in six taxonomic groups. For this 2016 release, we expanded the JASPAR CORE collection with 494 new TF binding profiles (315 in vertebrates, 11 in nematodes, 3 in insects, 1 in fungi and 164 in plants) and updated 59 profiles (58 in vertebrates and 1 in fungi). The introduced profiles represent an 83% expansion and 10% update when compared to the previous release. We updated the structural annotation of the TF DNA binding domains (DBDs) following a published hierarchical structural classification. In addition, we introduced 130 transcription factor flexible models trained on ChIP-seq data for vertebrates, which capture dinucleotide dependencies within TF binding sites. This new JASPAR release is accompanied by a new web tool to infer JASPAR TF binding profiles recognized by a given TF protein sequence. Moreover, we provide the users with a Ruby module complementing the JASPAR API to ease programmatic access and use of the JASPAR collection of profiles. Finally, we provide the JASPAR2016 R/Bioconductor data package with the data of this release. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.

GENIE Production Release 2.10.0

Energy Technology Data Exchange (ETDEWEB)

Alam, M. [Aligarh Muslim Univ., Aligarh (India). Dept. of Physics; Andreopoulos, C. [Univ. of Liverpool (United Kingdom). Dept. of Physics; Science and Technology Facilities Council (STFC), Oxford (United Kingdom). Rutherford Appleton Lab. (RAL); Athar, M. [Aligarh Muslim Univ., Aligarh (India). Dept. of Physics; Bodek, A. [Univ. of Rochester, NY (United States). Dept. of Physics; Christy, E. [Hampton Univ., Hampton, VA (United States). Dept. of Physics; Coopersmith, B. [Univ. of Rochester, NY (United States). Dept. of Physics; Dennis, S. [Univ. of Warwick, Coventry (United Kingdom). Dept .of Physics; Dytman, S. [Univ. of Pittsburgh, PA (United States). Dept. of Physics and Astronomy; Gallagher, H. [Tufts Univ., Medford, MA (United States). Dept. of Physics and Astronomy; Geary, N. [Univ. of Pittsburgh, PA (United States). Dept. of Physics and Astronomy; Golan, T. [Univ. of Rochester, NY (United States). Dept. of Physics; Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Hatcher, R. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Hoshina, K. [Univ. of Wisconsin, Madison, WI (United States). Dept. of Physics. Wisconsin IceCube Particle Astrophysics Center; Liu, J. [College of William and Mary, Williamsburg, VA (United States). Dept. of Physics; Mahn, K. [Michigan State Univ., East Lansing, MI (United States). Dept. of Physics and Astronomy; Marshall, C. [Univ. of Rochester, NY (United States). Dept. of Physics; Morrison, J. [Michigan State Univ., East Lansing, MI (United States). Dept. of Physics and Astronomy; Nirkko, M. [Univ. of Bern (Switzerland). Albert Einstein Center for Fundamental Physics. Lab. for High Energy Physics (LHEP); Nowak, J. [Lancaster Univ. (United Kingdom). Dept. of Physics; Perdue, G. N. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Yarba, J. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

2015-12-25

GENIE is a neutrino Monte Carlo event generator that simulates the primary interaction of a neutrino with a nuclear target, along with the subsequent propagation of the reaction products through the nuclear medium. It additionally contains libraries for fully-featured detector geometries and for managing various types of neutrino flux. This note details recent updates to GENIE, in particular, changes introduced into the newest production release, version 2.10.0.

GENIE Production Release 2.10.0

International Nuclear Information System (INIS)

Alam, M.; Athar, M.; Hatcher, R.; Hoshina, K.; Nowak, J.; Yarba, J.

2015-01-01

GENIE is a neutrino Monte Carlo event generator that simulates the primary interaction of a neutrino with a nuclear target, along with the subsequent propagation of the reaction products through the nuclear medium. It additionally contains libraries for fully-featured detector geometries and for managing various types of neutrino flux. This note details recent updates to GENIE, in particular, changes introduced into the newest production release, version 2.10.0.

Global Inventory of Methane Hydrate: How Large is the Threat? (Invited)

Science.gov (United States)

Buffett, B. A.; Frederick, J. M.

2010-12-01

Methane hydrate is a dark horse in the science of climate change. The volume of methane sequestered in marine sediments is large enough to pose a potential threat, yet the expected contribution to future warming is not known. Part of the uncertainty lies in the poorly understood details of methane release from hydrate. Slow, diffusive loss of methane probably results in oxidation by sulfate and precipitation to CaCO3 in the sediments, with little effect on climate. Conversely, a direct release of methane into the atmosphere is liable to have strong and immediate consequences. Progress in narrowing the possibilities requires a better understanding of the mechanisms responsible for methane release. Improvements are also needed in our estimates of the hydrate inventory, as this sets a limit on the possible response. Several recent estimates of the hydrate inventory have been constructed using mechanistic models. Many of the model parameters (e.g. sedimentation rate and sea floor temperature) can be estimated globally, while others (e.g. vertical fluid flow) are not well known. Available observations can be used to estimate the poorly known parameters, but it is reasonable to question whether the results from a limited number of sites are representative of other locations. Fluid flow is a case in point because most hydrate locations are associated with upward flow. On the other hand, simple models of sediment compaction predict downward flow relative to the sea floor, which acts to impede hydrate formation. A variety of mechanisms can produce upward flow, including time-dependent sedimentation, seafloor topography, subsurface fractures, dehydration of clay minerals and gradual burial of methane hydrate below the stability zone. Each of these mechanisms makes specific predictions for the magnitude of flow and the proportion of sea floor that is likely to be affected. We assess the role of fluid flow on the present-day inventory and show that the current estimates for

Tritium fuel cycle modeling and tritium breeding analysis for CFETR

Energy Technology Data Exchange (ETDEWEB)

Chen, Hongli; Pan, Lei; Lv, Zhongliang; Li, Wei; Zeng, Qin, E-mail: zengqin@ustc.edu.cn

2016-05-15

Highlights: • A modified tritium fuel cycle model with more detailed subsystems was developed. • The mean residence time method applied to tritium fuel cycle calculation was updated. • Tritium fuel cycle analysis for CFETR was carried out. - Abstract: Attaining tritium self-sufficiency is a critical goal for fusion reactor operated on the D–T fuel cycle. The tritium fuel cycle models were developed to describe the characteristic parameters of the various elements of the tritium cycle as a tool for evaluating the tritium breeding requirements. In this paper, a modified tritium fuel cycle model with more detailed subsystems and an updated mean residence time calculation method was developed based on ITER tritium model. The tritium inventory in fueling system and in plasma, supposed to be important for part of the initial startup tritium inventory, was considered in the updated mean residence time method. Based on the model, the tritium fuel cycle analysis of CFETR (Chinese Fusion Engineering Testing Reactor) was carried out. The most important two parameters, the minimum initial startup tritium inventory (I{sub m}) and the minimum tritium breeding ratio (TBR{sub req}) were calculated. The tritium inventories in steady state and tritium release of subsystems were obtained.

Inventory and source term evaluation of Russian nuclear power plants for marine applications

International Nuclear Information System (INIS)

Reistad, O.; Oelgaard, P.L.

2006-04-01

This report discusses inventory and source term properties in regard to operation and possible releases due to accidents from Russian marine reactor systems. The first part of the report discusses relevant accidents on the basis of both Russian and western sources. The overview shows that certain vessels were much more accident prone compared to others, in addition, there have been a noteworthy reduction in accidents the last two decades. However, during the last years new types of incidents, such as collisions, has occurred more frequently. The second part of the study considers in detail the most important factors for the source term; reactor operational characteristics and the radionuclide inventory. While Russian icebreakers has been operated on a similar basis as commercial power plants, the submarines has different power cyclograms which results in considerable lower values for fission product inventory. Theoretical values for radionuclide inventory are compared with computed results using the modelling tool HELIOS. Regarding inventory of transuranic elements, the results of the calculations are discussed in detail for selected vessels. Criticality accidents, loss-of-cooling accidents and sinking accidents are considered, bases on actual experiences with these types of accident and on theoretical considerations, and source terms for these accidents are discussed in the last chapter. (au)

Inventory and source term evaluation of Russian nuclear power plants for marine applications

Energy Technology Data Exchange (ETDEWEB)

Reistad, O. [Norwegian Radiation Protection Authority (Norway); Oelgaard, P.L. [Risoe National Lab. (Denmark)

2006-04-15

This report discusses inventory and source term properties in regard to operation and possible releases due to accidents from Russian marine reactor systems. The first part of the report discusses relevant accidents on the basis of both Russian and western sources. The overview shows that certain vessels were much more accident prone compared to others, in addition, there have been a noteworthy reduction in accidents the last two decades. However, during the last years new types of incidents, such as collisions, has occurred more frequently. The second part of the study considers in detail the most important factors for the source term; reactor operational characteristics and the radionuclide inventory. While Russian icebreakers has been operated on a similar basis as commercial power plants, the submarines has different power cyclograms which results in considerable lower values for fission product inventory. Theoretical values for radionuclide inventory are compared with computed results using the modelling tool HELIOS. Regarding inventory of transuranic elements, the results of the calculations are discussed in detail for selected vessels. Criticality accidents, loss-of-cooling accidents and sinking accidents are considered, bases on actual experiences with these types of accident and on theoretical considerations, and source terms for these accidents are discussed in the last chapter. (au)

The USA Nr Inventory: Dominant Sources and Primary Transport Pathways

Science.gov (United States)

Sabo, R. D.; Clark, C.; Sobota, D. J.; Compton, J.; Cooter, E. J.; Schwede, D. B.; Bash, J. O.; Rea, A.; Dobrowolski, J. P.

2016-12-01

Efforts to mitigate the deleterious effects of excess reactive nitrogen (Nr) on human health and ecosystem goods and service while ensuring food, biofuel, and fiber availability, is one of the most pressing environmental management challenges of this century. Effective management of Nr requires up to date inventories that quantitatively characterize the sources, transport, and transformation of Nr through the environment. The inherent complexity of the nitrogen cycle, however, through multiple exchange points across air, water, and terrestrial media, renders such inventories difficult to compile and manage. Previous Nr Inventories are for 2002 and 2007, and used data sources that have since been improved. Thus, this recent inventory will substantially advance the methodology across many sectors of the inventory (e.g. deposition and biological fixation in crops and natural systems) and create a recent snapshot that is sorely needed for policy planning and trends analysis. Here we use a simple mass balance approach to estimate the input-output budgets for all United States Geologic Survey Hydrologic Unit Code-8 watersheds. We focus on a recent year (i.e. 2012) to update the Nr Inventory, but apply the analytical approach for multiple years where possible to assess trends through time. We also compare various sector estimates using multiple methodologies. Assembling datasets that account for new Nr inputs into watersheds (e.g., atmospheric NOy deposition, food imports, biologic N fixation) and internal fluxes of recycled Nr (e.g., manure, Nr emmissions/volatilization) provide an unprecedented, data driven computation of N flux. Input-output budgets will offer insight into 1) the dominant sources of Nr in a watershed (e.g., food imports, atmospheric N deposition, or fertilizer), 2) the primary loss pathways for Nr (e.g., crop N harvest, volatilization/emissions), and 3) what watersheds are net sources versus sinks of Nr. These insights will provide needed clarity for

RELAP4/MOD5: a computer program for transient thermal-hydraulic analysis of nuclear reactors and related systems. User's manual. Supplement 1, RELAP4/MOD5, Update 2

International Nuclear Information System (INIS)

Bruch, C.G.

1976-08-01

RELAP4/MOD5, Update 1 was released to the Nuclear Regulatory Commission in January 1976. Six months of extensive use of Update 1 has led to the identification and correction of a number of errors in the code, as well as some logic changes, additional Evaluation Model (EM) checks, and one model revision. These changes have culminated in the release of an improved code identified as RELAP4/MOD5, Update 2. The RELAP4/MOD5 interim User's Manual (Interim Report SRD-113-76) reflected the Update 1 version of the code. The purpose of the supplement presented is to update the Interim User's Manual for use with RELAP4/MOD5, Update 2. Major differences between Updates 1 and 2 and the checkout of Update 2 are discussed. The final version of the User's Manual will be written in accordance with Update 2 and will be published as ANCR-NUREG 1335 during September 1976. Annotation of the existing three volumes of the User's Manual to cross-reference this Supplement is recommended

Sensitivity of the global submarine hydrate inventory to scenarios of future climate change

Science.gov (United States)

Hunter, S. J.; Goldobin, D. S.; Haywood, A. M.; Ridgwell, A.; Rees, J. G.

2013-04-01

The global submarine inventory of methane hydrate is thought to be considerable. The stability of marine hydrates is sensitive to changes in temperature and pressure and once destabilised, hydrates release methane into sediments and ocean and potentially into the atmosphere, creating a positive feedback with climate change. Here we present results from a multi-model study investigating how the methane hydrate inventory dynamically responds to different scenarios of future climate and sea level change. The results indicate that a warming-induced reduction is dominant even when assuming rather extreme rates of sea level rise (up to 20 mm yr-1) under moderate warming scenarios (RCP 4.5). Over the next century modelled hydrate dissociation is focussed in the top ˜100m of Arctic and Subarctic sediments beneath business-as-usual scenario (RCP 8.5), upper estimates of resulting global sea-floor methane fluxes could exceed estimates of natural global fluxes by 2100 (>30-50TgCH4yr-1), although subsequent oxidation in the water column could reduce peak atmospheric release rates to 0.75-1.4 Tg CH4 yr-1.

TMAP-7 simulation of D2 thermal release data from Be co-deposited layers

International Nuclear Information System (INIS)

Baldwin, M.J.; Schwarz-Selinger, T.; Yu, J.H.; Doerner, R.P.

2013-01-01

The efficacy of (1) bake-out at 513 K and 623 K, and (2) thermal transient (10 ms) loading to up to 1000 K, is explored for reducing D inventory in 1 μm thick Be–D (D/Be ∼0.1) co-deposited layers formed at 323 K for experiment (1) and ∼500 K for experiment (2). D release data from co-deposits are obtained by thermal desorption and used to validate a model input into the Tritium Migration and Analysis Program 7 (TMAP). In (1), good agreement with experiment is found for a TMAP model encorporating traps of activation energies, 0.80 eV and 0.98 eV, whereas an additional 2 eV trap was required to model experiment (2). Thermal release is found to be trap limited, but simulations are optimal when surface recombination is taken into account. Results suggest that thick built-up co-deposited layers will hinder ITER inventory control, and that bake periods (∼1 day) will be more effective in inventory reduction than transient thermal loading

TMAP-7 simulation of D2 thermal release data from Be co-deposited layers

Science.gov (United States)

Baldwin, M. J.; Schwarz-Selinger, T.; Yu, J. H.; Doerner, R. P.

2013-07-01

The efficacy of (1) bake-out at 513 K and 623 K, and (2) thermal transient (10 ms) loading to up to 1000 K, is explored for reducing D inventory in 1 μm thick Be-D (D/Be ˜0.1) co-deposited layers formed at 323 K for experiment (1) and ˜500 K for experiment (2). D release data from co-deposits are obtained by thermal desorption and used to validate a model input into the Tritium Migration & Analysis Program 7 (TMAP). In (1), good agreement with experiment is found for a TMAP model encorporating traps of activation energies, 0.80 eV and 0.98 eV, whereas an additional 2 eV trap was required to model experiment (2). Thermal release is found to be trap limited, but simulations are optimal when surface recombination is taken into account. Results suggest that thick built-up co-deposited layers will hinder ITER inventory control, and that bake periods (˜1 day) will be more effective in inventory reduction than transient thermal loading.

Low and intermediate level waste in SFR-1. Reference Waste Inventory 2007

International Nuclear Information System (INIS)

Almkvist, Lisa; Gordon, Ann

2007-11-01

The objective with this report is to describe all the waste and the waste package that is expected to be deposited in SFR 1 at the time of closure. The report will form the basis for the release calculation in the safety analysis for SFR 1. Three different scenarios are explored in this report; the waste inventory is based on an estimated operational lifetime of the Swedish nuclear power plants of 50 and 60 years and that closure of the SFR 1 repository will take place in 2040 or 2050 respectively. The third scenario is where the repository is full (one part where the activity adds up to 1016 Bq and one part where the repository is considered full regarding volume). In the report, data about geometries, weights, materials, chemicals and radionuclide are given. No chemotoxic material has been identified in the waste. The inventory is estimated using the Prosit-interface which extracts information from the Triumf database. The inventory is based on so called 'waste types' and the waste types' 'reference waste package'. The reference waste package combined with a prognosis of the number of waste packages to be delivered to SFR 1 gives the final waste inventory for SFR 1. All reference waste packages are thoroughly described in the appendices of this report. The reference waste packages are as far as possible based on actual experiences and measurements. The radionuclide inventory is also based on actual measurements. The inventory is based on measurements of 60 Co and 137 Cs in waste packages and on measurements of 239 Pu and 240 Pu in reactor water. Other nuclides in the inventory are calculated with correlation factors

New national emission inventory for navigation in Denmark

Science.gov (United States)

Winther, Morten

standards for navigation, in order to gain emission improvements in line with those achieved for other mobile sources. The new fuel consumption estimates for national sea transport are regarded as much more accurate than the DEA fuel sales data used previously, and the recommendation for DEA is to replace their current fuel sales figures by the new estimates calculated in this project. Such updated fuel consumption time series for national sea transport will lead, in turn, to changes in the energy statistics for fisheries (gas oil) and industry (heavy fuel oil), so the national energy balance can remain unchanged. For international transport, fuel sales data as such are regarded as highly accurate for Denmark, since they are compiled from audited information from the Danish oil suppliers, and the inventory approach follows good practice for the United Nations Framework Convention of Climate Changes (UNFCCC) and United Nations Economic Commission for Europe (UNECE) convention, when fleet activity data are missing. However, in order to make inventory upgrades and to support Danish policymakers in bunker emissions allocation, fleet activity-based estimates calculated in a further project would be useful.

Harmonisation and extension of the bioenergy inventories and assessment - End report

Energy Technology Data Exchange (ETDEWEB)

Faist Emmenegger, M.; Gmuender, S.; Reinhard, J.; Zah, R. [Swiss Federal Laboratories for Materials Science and Technology (EMPA), Duebendorf (Switzerland); Nemecek, T.; Schnetzer, J. [Forschungsanstalt Agroscope Reckenholz-Taenikon ART, Zuerich (Switzerland); Bauer, Ch.; Simons, A. [Paul Scherrer Institut, PSI, Villigen (Switzerland); Doka, G. [Doka Oekobilanzen, Zuerich (Switzerland)

2012-08-15

This study extended and updated the ecoinvent inventories dating back from 2007. Various new crop inventories, conversion processes for biofuel production and unconventional fossil pathways have been introduced, the nitrogen fluxes and the land use modelling have been updated, and state-of-the-art impact assessment methods have been used for calculating the LCA. The results have been compared with those from the 2007 study of Zah et al. (2007) and uncertainty has been thoroughly analysed. The results of the selected ILCD-Midpoint indicators distinctly show that for many of the indicators, the biofuel value chains have higher impact values than the fossil reference, except for the methane pathways. Only climate change and ozone depletion are more favourable in most of the biofuel pathways than the fossil reference. Higher values for biofuel production pathways are found in indicators relevant for agricultural processes (eutrophication, acidification, water depletion, ecotoxicity, land use). Although biofuels can allow the reduction of fossil fuel use and of greenhouse gas emissions, they often shift environmental burdens towards land use-related impacts. Indeed, only very few biofuel pathways show lower or at least no higher impacts for all indicators than the fossil fuels. The most promising pathways are those based on methanisation of residues or on reforestation activities. Generally, the study confirms the high diversity in the impact patterns of biofuel pathways and therefore the necessity of assessing biofuel projects with specific data. However, uncertainty of the results is highly due to lack of data and modelling uncertainties. There is for example a need for more specific modelling of agricultural N{sub 2}O. This uncertainty should lead to general caution when promoting biofuels. (authors)

Harmonisation and extension of the bioenergy inventories and assessment - End report

International Nuclear Information System (INIS)

Faist Emmenegger, M.; Gmuender, S.; Reinhard, J.; Zah, R.; Nemecek, T.; Schnetzer, J.; Bauer, Ch.; Simons, A.; Doka, G.

2012-08-01

This study extended and updated the ecoinvent inventories dating back from 2007. Various new crop inventories, conversion processes for biofuel production and unconventional fossil pathways have been introduced, the nitrogen fluxes and the land use modelling have been updated, and state-of-the-art impact assessment methods have been used for calculating the LCA. The results have been compared with those from the 2007 study of Zah et al. (2007) and uncertainty has been thoroughly analysed. The results of the selected ILCD-Midpoint indicators distinctly show that for many of the indicators, the biofuel value chains have higher impact values than the fossil reference, except for the methane pathways. Only climate change and ozone depletion are more favourable in most of the biofuel pathways than the fossil reference. Higher values for biofuel production pathways are found in indicators relevant for agricultural processes (eutrophication, acidification, water depletion, ecotoxicity, land use). Although biofuels can allow the reduction of fossil fuel use and of greenhouse gas emissions, they often shift environmental burdens towards land use-related impacts. Indeed, only very few biofuel pathways show lower or at least no higher impacts for all indicators than the fossil fuels. The most promising pathways are those based on methanisation of residues or on reforestation activities. Generally, the study confirms the high diversity in the impact patterns of biofuel pathways and therefore the necessity of assessing biofuel projects with specific data. However, uncertainty of the results is highly due to lack of data and modelling uncertainties. There is for example a need for more specific modelling of agricultural N 2 O. This uncertainty should lead to general caution when promoting biofuels. (authors)

A computerized system for control and management of radionuclide inventory: application in nuclear medicine

International Nuclear Information System (INIS)

Hoory, S.; Levy, I.M.; Moskowitz, G.; Bandyopadhyay, D.; Vaugeois, J.C.

1982-01-01

An interactive computerized system for radioisotope management and instantaneous inventory is reported. The system is capable of handling operations such as filing, nuclear imaging and disposing of various radionuclides. All radiopharmaceutical transactions are achieved with the aid of a Prime 300 mini-computer of 192K words of high speed semi-conductor memory and over 120 mega bytes of disk storage. The system automatically corrects for the appropriate decay, monitors and updates the storage file after every subsequent study. The performed study is recorded in a special file, together with the time and data retrieved from the computer's real time clock at the time of the entry. The system provides an organized and complete bookkeeping of all records concerning radionuclide transactions. It is found to be simple, efficient, highly versatile, and drastically reduces the time of operation and errors in handling the radioisotope inventory. (author)

A systems approach to inventory management of repairables in the Navy

OpenAIRE

Apple, Chris Leon

1985-01-01

Approved for public release; distribution is unlimited This thesis develops an inventory model for repairable items which integrates the shipboard protection level into the wholesale stock level computations. It uses mean supply response time (MSRT) as its measure of effectiveness and provides methods for computing either the required wholesale stock level given a MSRT goal or for minimizing the system MSRT subject to budgetary constraints. Examples are provided which demons...

Generation and release of radioactive gases in LLW disposal facilities

Energy Technology Data Exchange (ETDEWEB)

Yim, M.S. [Harvard School Public Health, Boston, MA (United States); Simonson, S.A. [Massachusetts Institute of Technology, Cambridge, MA (United States)

1995-02-01

The atmospheric release of radioactive gases from a generic engineered LLW disposal facility and its radiological impacts were examined. To quantify the generation of radioactive gases, detailed characterization of source inventory for carbon-14, tritium, iodine-129, krypton-85, and radon-222, was performed in terms of their activity concentrations; their distribution within different waste classes, waste forms and containers; and their subsequent availability for release in volatile or gaseous form. The generation of gases was investigated for the processes of microbial activity, radiolysis, and corrosion of waste containers and metallic components in wastes. The release of radionuclides within these gases to the atmosphere was analyzed under the influence of atmospheric pressure changes.

Nuclear, thermo-mechanical and tritium release analysis of ITER breeding blanket

International Nuclear Information System (INIS)

Kosaku, Yasuo; Kuroda, Toshimasa; Enoeda, Mikio; Hatano, Toshihisa; Sato, Satoshi; Miki, Nobuharu; Akiba, Masato

2003-06-01

The design of the breeding blanket in ITER applies pebble bed breeder in tube (BIT) surrounded by multiplier pebble bed. It is assumed to use the same module support mechanism and coolant manifolds and coolant system as the shielding blankets. This work focuses on the verification of the design of the breeding blanket, from the viewpoints which is especially unique to the pebble bed type breeding blanket, such as, tritium breeding performance, tritium inventory and release behavior and thermo-mechanical performance of the ITER breeding blanket. With respect to the neutronics analysis, the detailed analyses of the distribution of the nuclear heating rate and TBR have been performed in 2D model using MCNP to clarify the input data for the tritium inventory and release rate analyses and thermo-mechanical analyses. With respect to the tritium inventory and release behavior analysis, the parametric analyses for selection of purge gas flow rate were carried out from the view point of pressure drop and the tritium inventory/release performance for Li 2 TiO 3 breeder. The analysis result concluded that purge gas flow rate can be set to conventional flow rate setting (88 l/min per module) to 1/10 of that to save the purge gas flow and minimize the size of purge gas pipe. However, it is necessary to note that more tritium is transformed to HTO (chemical form of water) in case of Li 2 TiO 3 compared to other breeder materials. With respect to the thermo-mechanical analyses of the pebble bed blanket structure, the analyses have been performed by ABAQUS with 2D model derived from one of eight facets of a blanket module, based on the reference design. Analyses were performed to identify the temperature distribution incorporating the pebble bed mechanical simulation and influence of mechanical behavior to the thermal behavior. The result showed that the maximum temperature in the breeding material was 617degC in the first row of breeding rods and the minimum temperature was 328

Test Methods for Evaluating Solid Waste, Physical/Chemical Methods. First Update. (3rd edition)

International Nuclear Information System (INIS)

Friedman; Sellers.

1988-01-01

The proposed Update is for Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846, Third Edition. Attached to the report is a list of methods included in the proposed update indicating whether the method is a new method, a partially revised method, or a totally revised method. Do not discard or replace any of the current pages in the SW-846 manual until the proposed update I package is promulgated. Until promulgation of the update package, the methods in the update package are not officially part of the SW-846 manual and thus do not carry the status of EPA-approved methods. In addition to the proposed Update, six finalized methods are included for immediate inclusion into the Third Edition of SW-846. Four methods, originally proposed October 1, 1984, will be finalized in a soon to be released rulemaking. They are, however, being submitted to subscribers for the first time in the update. These methods are 7211, 7381, 7461, and 7951. Two other methods were finalized in the 2nd Edition of SW-846. They were inadvertantly omitted from the 3rd Edition and are not being proposed as new. These methods are 7081 and 7761

TMAP-7 simulation of D{sub 2} thermal release data from Be co-deposited layers

Energy Technology Data Exchange (ETDEWEB)

Baldwin, M.J., E-mail: mbaldwin@ferp.ucsd.edu [Center for Energy Research, University of California at San Diego, La Jolla, CA 92093-0417 (United States); Schwarz-Selinger, T. [Max-Planck-Institut für Plasmaphysik, EURATOM Association, Boltzmannstrasse 2, 85748 Garching (Germany); Yu, J.H. [Center for Energy Research, University of California at San Diego, La Jolla, CA 92093-0417 (United States); Doerner, R.P., E-mail: rdoerner@ucsd.edu [Center for Energy Research, University of California at San Diego, La Jolla, CA 92093-0417 (United States)

2013-07-15

The efficacy of (1) bake-out at 513 K and 623 K, and (2) thermal transient (10 ms) loading to up to 1000 K, is explored for reducing D inventory in 1 μm thick Be–D (D/Be ∼0.1) co-deposited layers formed at 323 K for experiment (1) and ∼500 K for experiment (2). D release data from co-deposits are obtained by thermal desorption and used to validate a model input into the Tritium Migration and Analysis Program 7 (TMAP). In (1), good agreement with experiment is found for a TMAP model encorporating traps of activation energies, 0.80 eV and 0.98 eV, whereas an additional 2 eV trap was required to model experiment (2). Thermal release is found to be trap limited, but simulations are optimal when surface recombination is taken into account. Results suggest that thick built-up co-deposited layers will hinder ITER inventory control, and that bake periods (∼1 day) will be more effective in inventory reduction than transient thermal loading.

Safety analysis and inventory control of transuranic and low-level waste in common storage

International Nuclear Information System (INIS)

Porten, D.R.; Bonner, A.L.; Joyce, J.P.

1993-01-01

This paper describes a methodology developed For the inventory control of low-level waste (LLW) and transuranic (TRU) waste, when both are stored in the same location, and both contribute to an inventory constrained by safety considerations. Development of the method arose from the necessity to make safety analysis calculations for the addition of LLW, in quantities greater than existing inventory limits would allow when stored with TRU waste, in the Hanford Central Waste Complex (CWC)-Ensuring that the dose consequences of credible releases are maintained at low-hazard limits or less, was used to allow greater than Type A quantities of LLW into the CWC. Basically, what happens is the original limited amount of TRU allowed is reduced by some equivalent amount of LLW introduced. The total quantity of TRU, and LLW in excess of Type A quantities, must be administratively maintained via curie equivalency Factors to ensure operation as a low-hazard Facility. The ''equivalency'' between TRU and LLW proposed here is specific only to the CWC, but the methodology can be used for other specific applications, such as TRU and LLW storage or handling facilities where inventory limits must be enforced or where a simplified inventory system is required

An update to the Surface Ocean CO2 Atlas (SOCAT version 2)

Digital Repository Service at National Institute of Oceanography (India)

Bakker, D.C.E.; Hankin, S.; Olsen, A; Pfeil, B.; Smith, K.; Alin, S.R.; Cosca, C.; Hales, B.; Harasawa, S.; Kozyr, A; Nojiri, Y.; OBrien, K.M.; Schuster, U.; Telszewski, M.; Tilbrook, B.; Wada, C.; Akl, J.; Barbero, L.; Bates, N.; Boutin, J.; Cai, W.J.; Castle, R.D.; Chavez, F.; Chen, L.; Chierici, M.; Currie, K.; Evans, W.; Feely, R.A; Fransson, A; Gao, Z.; Hardman-Mountford, N.; Hoppema, M.; Huang, W.J.; Hunt, C.W.; Huss, B.; Ichikawa, T.; Jacobson, A; Johannessen, T.; Jones, E.M.; Jones, S.; Sara, J.; Kitidis, V.; Kortzinger, A.; Lauvset, S.; Lefevre, N.; Manke, A.B.; Mathis, J.; Metzl, N.; Monteiro, P.; Murata, A.; Newberger, T.; Nobuo, T.; Ono, T.; Paterson, K.; Pierrot, D.; Rios, A.F.; Sabine, C.L.; Saito, S.; Salisbury, J.; Sarma, V.V.S.S.; Schlitzer, R.; Sieger, R.; Skjelvan, I.; Steinhoff, T.; Sullivan, K.; Sutherland, S.C.; Suzuki, T.; Sutton, A.; Sweeney, C.; Takahashi, T.; Tjiputra, J.; VanHeuven, S.; Vandemark, D.; Vlahos, P.; Wallace, D.W.R.; Wanninkhof, R.; Watson, A.J.

of SOCAT is an update of the previous release (version 1) with more data (increased from 6.3 million to 10.1 million surface water fCO₂ values) and extended data coverage (from 1968–2007 to 1968–2011). The quality control criteria, while...

Developments in consequence modelling of accidental releases of hazardous materials

NARCIS (Netherlands)

Boot, H.

2012-01-01

The modelling of consequences of releases of hazardous materials in the Netherlands has mainly been based on the “Yellow Book”. Although there is no updated version of this official publication, new insights have been developed during the last decades. This article will give an overview of new

Low and intermediate level waste in SFR-1. Reference Waste Inventory 2007

Energy Technology Data Exchange (ETDEWEB)

Almkvist, Lisa (Vattenfall Power Consultant AB, Stockholm (SE)); Gordon, Anna (Swedish Nuclear Fuel and Waste Management Co., Stockholm (SE))

2007-11-15

The objective with this report is to describe all the waste and the waste package that is expected to be deposited in SFR 1 at the time of closure. The report will form the basis for the release calculation in the safety analysis for SFR 1. Three different scenarios are explored in this report; the waste inventory is based on an estimated operational lifetime of the Swedish nuclear power plants of 50 and 60 years and that closure of the SFR 1 repository will take place in 2040 or 2050 respectively. The third scenario is where the repository is full (one part where the activity adds up to 1016 Bq and one part where the repository is considered full regarding volume). In the report, data about geometries, weights, materials, chemicals and radionuclide are given. No chemotoxic material has been identified in the waste. The inventory is estimated using the Prosit-interface which extracts information from the Triumf database. The inventory is based on so called 'waste types' and the waste types' 'reference waste package'. The reference waste package combined with a prognosis of the number of waste packages to be delivered to SFR 1 gives the final waste inventory for SFR 1. All reference waste packages are thoroughly described in the appendices of this report. The reference waste packages are as far as possible based on actual experiences and measurements. The radionuclide inventory is also based on actual measurements. The inventory is based on measurements of 60Co and 137Cs in waste packages and on measurements of 239Pu and 240Pu in reactor water. Other nuclides in the inventory are calculated with correlation factors

Uncertainties in the Norwegian greenhouse gas emission inventory

Energy Technology Data Exchange (ETDEWEB)

Flugsrud, Ketil; Hoem, Britta

2011-11-15

The national greenhouse gas (GHG) emission inventory is compiled from estimates based on emission factors and activity data and from direct measurements by plants. All these data and parameters will contribute to the overall inventory uncertainty. The uncertainties and probability distributions of the inventory input parameters have been assessed based on available data and expert judgements.Finally, the level and trend uncertainties of the national GHG emission inventory have been estimated using Monte Carlo simulation. The methods used in the analysis correspond to an IPCC tier 2 method, as described in the IPCC Good Practice Guidance (IPCC 2000) (IPCC 2000). Analyses have been made both excluding and including the sector LULUCF (land use, land-use change and forestry). The uncertainty analysis performed in 2011 is an update of the uncertainty analyses performed for the greenhouse gas inventory in 2006 and 2000. During the project we have been in contact with experts, and have collected information about uncertainty from them. Main focus has been on the source categories where changes have occured since the last uncertainty analysis was performed in 2006. This includes new methodology for several source categories (for example for solvents and road traffic) as well as revised uncertainty estimates. For the installations included in the emission trading system, new information from the annual ETS reports about uncertainty in activity data and CO2 emission factor (and N2O emission factor for nitric acid production) has been used. This has improved the quality of the uncertainty estimates for the energy and manufacturing sectors. The results show that the uncertainty level in the total calculated greenhouse gas emissions for 2009 is around 4 per cent. When including the LULUCF sector, the total uncertainty is around 17 per cent in 2009. The uncertainty estimate is lower now than previous analyses have shown. This is partly due to a considerable work made to improve

The IAEA inventory databases related to radioactive material entering the marine environment

International Nuclear Information System (INIS)

Rastogi, R.C.; Sjoeblom, K.L.

1999-01-01

Contracting Parties to the Convention on the Prevention of Marine Pollution by Dumping of Wastes and other Matter (LC 1972) have requested the IAEA to develop an inventory of radioactive material entering the marine environment from all sources. The rationale for developing and maintaining the inventory is related to its use as an information base with which the impact of radionuclides entering the marine environment from different sources can be assessed and compared. Five anthropogenic sources of radionuclides entering the marine environment can be identified. These sources are: radioactive waste disposal at sea; accidents and losses at sea involving radioactive material; discharge of low level liquid effluents from land-based nuclear facilities; the fallout from nuclear weapons testing; and accidental releases from land-based nuclear facilities. The first two of these sources are most closely related to the objective of the LC 1972 and its request to the IAEA. This paper deals with the Agency's work on developing a database on radioactive material entering the marine environment from these two sources. The database has the acronym RAMEM (RAdioactive Material Entering the Marine Environment). It includes two modules: inventory of radioactive waste disposal at sea and inventory of accidents and losses at sea involving radioactive material

Procedure for taking physical inventories

International Nuclear Information System (INIS)

Anon.

1981-01-01

This session is intended to apprise one of the various aspects of procedures and routines that Exxon Nuclear uses with respect to its nuclear materials physical inventory program. The presentation describes how plant physical inventories are planned and taken. The description includes the planning and preparation for taking the inventory, the clean-out procedures for converting in-process material to measurable items, the administrative procedures for establishing independent inventory teams and for inventorying each inventory area, the verification procedures used to include previously measured tamper-safed items in the inventory, and lastly, procedures used to reconcile the inventory and calculate MUF (materials unaccounted for). The purpose of the session is to enable participants to: (1) understand the planning and pre-inventorty procedures and their importance; (2) understand the need for and the required intensity of clean-out procedures; (3) understand how inventory teams are formed, and how the inventory is conducted; (4) understand the distinction between inventory previously measured tamper-safed items and other materials not so characterized; (5) understand the reconciliation procedures; and (6) calculate a MUF given the book and inventory results

Computer Science in High School Graduation Requirements. ECS Education Trends (Updated)

Science.gov (United States)

Zinth, Jennifer

2016-01-01

Allowing high school students to fulfill a math or science high school graduation requirement via a computer science credit may encourage more student to pursue computer science coursework. This Education Trends report is an update to the original report released in April 2015 and explores state policies that allow or require districts to apply…

Formaldehyde-releasers: relationship to formaldehyde contact allergy. Contact allergy to formaldehyde and inventory of formaldehyde-releasers

DEFF Research Database (Denmark)

de Groot, Anton C; Flyvholm, Mari-Ann; Lensen, Gerda

2009-01-01

in the literature as formaldehyde-releasers, data are inadequate to consider them as such beyond doubt. Several (nomenclature) mistakes and outdated information are discussed. Formaldehyde and formaldehyde allergy are reviewed: applications, exposure scenarios, legislation, patch testing problems, frequency....... The frequency of contact allergy to formaldehyde is consistently higher in the USA (8-9%) than in Europe (2-3%). Patch testing with formaldehyde is problematic; the currently used 1% solution may result in both false-positive and false-negative (up to 40%) reactions. Determining the relevance of patch test...

County and Parish Boundaries, This was created and maintained by Johnson County Records and Tax Administration and is updated when changes occur to county boundaries, Published in 2007, Johnson County Government.

Data.gov (United States)

NSGIC Local Govt | GIS Inventory — County and Parish Boundaries dataset current as of 2007. This was created and maintained by Johnson County Records and Tax Administration and is updated when changes...

An update to the Surface Ocean CO2 Atlas (SOCAT version 2)

NARCIS (Netherlands)

Bakker, D.C.E.; Pfeil, B.; Smith, K.; Hankin, S.; Olsen, A.; Alin, S. R.; Cosca, C.; Harasawa, S.; Kozyr, A.; Nojiri, Y.; O'Brien, K. M.; Schuster, U.; Telszewski, M.; Tilbrook, B.; Wada, C.; Akl, J.; Barbero, L.; Bates, N. R.; Boutin, J.; Bozec, Y.; Cai, W. -J.; Castle, R. D.; Chavez, F. P.; Chen, L.; Chierici, M.; Currie, K.; de Baar, H. J. W.; Evans, W.; Feely, R. A.; Fransson, A.; Gao, Z.; Hales, B.; Hardman-Mountford, N. J.; Hoppema, M.; Huang, W. -J.; Hunt, C. W.; Huss, B.; Ichikawa, T.; Johannessen, T.; Jones, E. M.; Jones, S. D.; Jutterstrom, S.; Kitidis, V.; Koertzinger, A.; Landschuetzer, P.; Lauvset, S. K.; Lefevre, N.; Manke, A. B.; Mathis, J. T.; Merlivat, L.; Metzl, N.; Murata, A.; Newberger, T.; Omar, A. M.; Ono, T.; Park, G. -H.; Paterson, K.; Pierrot, D.; Rios, A. F.; Sabine, C. L.; Saito, S.; Salisbury, J.; Sarma, V. V. S. S.; Schlitzer, R.; Sieger, R.; Skjelvan, I.; Steinhoff, T.; Sullivan, K. F.; Sun, H.; Sutton, A. J.; Suzuki, T.; Sweeney, C.; Takahashi, T.; Tjiputra, J.; Tsurushima, N.; van Heuven, S. M. A. C.; Vandemark, D.; Vlahos, P.; Wallace, D. W. R.; Wanninkhof, R.; Watson, A.J.

2014-01-01

The Surface Ocean CO2 Atlas (SOCAT), an activity of the international marine carbon research community, provides access to synthesis and gridded fCO(2) (fugacity of carbon dioxide) products for the surface oceans. Version 2 of SOCAT is an update of the previous release (version 1) with more data

Inventory - Dollars and sense

International Nuclear Information System (INIS)

Samson, J.R.

1992-01-01

Nuclear utilities are becoming more aware of the importance of having an inventory investment that supports two opposing philosophies. The business philosophy wants a minimal inventory investment to support a better return on invested dollars. This increase in return comes from having the dollars available to invest versus having the money tied up in inventory sitting on the shelf. The opposing viewpoint is taken by maintenance/operations organizations, which desire the maximum inventory available on-site to repair any component at any time to keep the units on-line at all times. Financial managers also want to maintain cash flow throughout operations so that plants run without interruptions. Inventory management is therefore a mixture of financial logistics with an operation perspective in mind. A small amount of common sense and accurate perception also help. The challenge to the materials/inventory manager is to optimize effectiveness of the inventory by having high material availability at the lowest possible cost

REFREP: a near-field model for a spent fuel repository

International Nuclear Information System (INIS)

Hautojaervi, A.; Vieno, T.

1988-05-01

A code package for near-field performance analysis of spent fuel disposal has been programmed. The conceptual models used are shortly described in connection with th model presentations. For more comprehensive descriptions the previous safety analysis and references therein are referred. The REFREP package consists of nine individual modules performing the following tasks: viewing and updating of the data files (UPDATE), calculating of the breaching times of canisters (CORRFLUX), calculating of stationary nuclide release rates using solubility values (MASSFLUX), calculating of actinide inventories from chain decay (INVENT), calculating of elemental inventories of actinides (ELEMENT), calculating of nuclide release rates according to congruent release (CONGRUNT), performing of sensitivity analysis for one variable (SENSIT), summing of release rates from individual canisters according to given probability distributions of canister breaching times (PROBREL), and forming a compact data file including all the input values (DATAOUT). The results have been shown to agree very well with the results of the previous safety analysis where near-field analysis was performed by means of separate codes and manual calculation. The REFREP model offers already at this stage some additional features to the old procedures and more versatile capabilities can easyly be added into the modular structure of the package. REFREP has been developed in a VAX-environment. Some changes in file handling might be necessary if the code is transferred to another computer

Kepler Stellar Properties Catalog Update for Q1-Q17 DR25 Transit Search

Science.gov (United States)

Mathur, Savita; Huber, Daniel

2016-01-01

Huber et al. (2014) presented revised stellar properties for 196,468 Kepler targets, which were used for the Q1-Q16 TPSDV planet search (Tenenbaum et al. 2014). The catalog was based on atmospheric properties (i.e., temperature (Teff), surface gravity (log(g)), and metallicity ([FeH])) published in the literature using a variety of methods (e.g., asteroseismology, spectroscopy, exoplanet transits, photometry), which were then homogeneously fitted to a grid of Dartmouth (DSEP) isochrones (Dotter et al. 2008). The catalog was updated in early 2015 for the Q1-Q17 Data Release (DR) 24 transit search (Seader et al. 2015) based on the latest classifications of Kepler targets in the literature at that time. The methodology followed Huber et al. (2014). Here we provide updated stellar properties of 197,096 Kepler targets. Like the previous catalog, this update is based on atmospheric properties that were either published in the literature or provided by the Kepler community follow-up program (CFOP). The input values again come from different methods: asteroseismology, spectroscopy, flicker, and photometry. This catalog update was developed to support the SOC 9.3 TPSDV planet search (Twicken et al. 2016), which is expected to be the final search and data release by the Kepler project.In this document, we describe the method and the inputs that were used to build the catalog. The methodology follows Huber et al. (2014) with a few improvements as described in Section 2.

Determination of fission gas release of spent nuclear fuel in puncturing test and in leaching experiments under anoxic conditions

Energy Technology Data Exchange (ETDEWEB)

González-Robles, E., E-mail: ernesto.gonzalez-robles@kit.edu [Karlsruhe Institute of Technology, Institute for Nuclear Waste Disposal (KIT-INE), P.O. Box 3640, D-76021, Karlsruhe (Germany); Metz, V. [Karlsruhe Institute of Technology, Institute for Nuclear Waste Disposal (KIT-INE), P.O. Box 3640, D-76021, Karlsruhe (Germany); Wegen, D.H. [European Commission, Joint Research Centre, Institute for Transuranium Elements (JRC-ITU), P.O. Box 2340, 76125, Karlsruhe (Germany); Herm, M. [Karlsruhe Institute of Technology, Institute for Nuclear Waste Disposal (KIT-INE), P.O. Box 3640, D-76021, Karlsruhe (Germany); Papaioannou, D. [European Commission, Joint Research Centre, Institute for Transuranium Elements (JRC-ITU), P.O. Box 2340, 76125, Karlsruhe (Germany); Bohnert, E. [Karlsruhe Institute of Technology, Institute for Nuclear Waste Disposal (KIT-INE), P.O. Box 3640, D-76021, Karlsruhe (Germany); Gretter, R. [European Commission, Joint Research Centre, Institute for Transuranium Elements (JRC-ITU), P.O. Box 2340, 76125, Karlsruhe (Germany); Müller, N. [Karlsruhe Institute of Technology, Institute for Nuclear Waste Disposal (KIT-INE), P.O. Box 3640, D-76021, Karlsruhe (Germany); Nasyrow, R.; Weerd, W. de; Wiss, T. [European Commission, Joint Research Centre, Institute for Transuranium Elements (JRC-ITU), P.O. Box 2340, 76125, Karlsruhe (Germany); Kienzler, B. [Karlsruhe Institute of Technology, Institute for Nuclear Waste Disposal (KIT-INE), P.O. Box 3640, D-76021, Karlsruhe (Germany)

2016-10-15

During reactor operation the fission gases Kr and Xe are formed within the UO{sub 2} matrix of nuclear fuel. Their quantification is important to evaluate their impact on critical parameters regarding the fuel behaviour during irradiation and (long-term) interim storage, such as internal pressure of the fuel rod and fuel swelling. Moreover the content of Kr and Xe in the plenum of a fuel rod and their content in the UO{sub 2} fuel itself are widely used as indicators for the release properties of {sup 129}I, {sup 137}Cs, and other safety relevant radionuclides with respect to final disposal of spent nuclear fuel. The present study deals with the fission gas release from spent nuclear fuel exposed to simulated groundwater in comparison with the fission gas previously released to the fuel rod plenum during irradiation in reactor. In a unique approach we determined both the Kr and Xe inventories in the plenum by means of a puncturing test and in leaching experiments with a cladded fuel pellet and fuel fragments in bicarbonate water under 3.2 bar H{sub 2} overpressure. The fractional inventory of the fission gases released during irradiation into the plenum was (8.3 ± 0.9) %. The fraction of inventory of fission gases released during the leaching experiments was (17 ± 2) % after 333 days of leaching of the cladded pellet and (25 ± 2) % after 447 days of leaching of the fuel fragments, respectively. The relatively high release of fission gases in the experiment with fuel fragments was caused by the increased accessibility of water to the Kr and Xe occluded in the fuel.

Road Edge of Pavement, Pavement Condition Ratings and Maintenance Designations per Street Centerline. Updated frequently by Public Works Streets Division, Published in 2006, 1:1200 (1in=100ft) scale, City of Asheville Government.

Data.gov (United States)

NSGIC Local Govt | GIS Inventory — Road Edge of Pavement dataset current as of 2006. Pavement Condition Ratings and Maintenance Designations per Street Centerline. Updated frequently by Public Works...

Tritium release from neutron irradiated beryllium pebbles

Energy Technology Data Exchange (ETDEWEB)

Scaffidi-Argentina, F.; Werle, H. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Neutronenphysik und Reactortechnik

1998-01-01

One of the most important open issues related to beryllium for fusion applications refers to the kinetics of the tritium release as a function of neutron fluence and temperature. The EXOTIC-7 as well as the `Beryllium` experiments carried out in the HFR reactor in Petten are considered as the most detailed and significant tests for investigating the beryllium response under neutron irradiation. This paper reviews the present status of beryllium post-irradiation examinations performed at the Forschungszentrum Karlsruhe with samples from the above mentioned irradiation experiments, trying to elucidate the tritium release controlling processes. In agreement with previous studies it has been found that release starts at about 500-550degC and achieves a maximum at about 700-750degC. The observed release at about 500-550degC is probably due to tritium escaping from chemical traps, while the maximum release at about 700-750degC is due to tritium escaping from physical traps. The consequences of a direct contact between beryllium and ceramics during irradiation, causing tritium implanting in a surface layer of beryllium up to a depth of about 40 mm and leading to an additional inventory which is usually several times larger than the neutron-produced one, are also presented and the effects on the tritium release are discussed. (author)

Inventory control strategies

International Nuclear Information System (INIS)

Primrose, D.

1998-01-01

Finning International Inc. is in the business of selling, financing and servicing Caterpillar and complementary equipment. Its main markets are in western Canada, Britain and Chile. This paper discusses the parts inventory strategies system for Finning (Canada). The company's territory covers British Columbia, Alberta, the Yukon and the Northwest Territories. Finning's parts inventory consists of 80,000 component units valued at more than $150 M. Distribution centres are located in Langley, British Columbia and Edmonton, Alberta. To make inventory and orders easier to control, Finning has designed a computer-based system, with software written exclusively for Caterpillar dealers. The system makes use of a real time electronic interface with all Finning locations, plus all Caterpillar facilities and other dealers in North America. Details of the system are discussed, including territorial stocking procedures, addition to stock, exhaustion of stock, automatic/suggest order controls, surplus inventory management, and procedures for jointly managed inventory. 3 tabs., 1 fig

WW LCI v2: A second-generation life cycle inventory model for chemicals discharged to wastewater systems.

Science.gov (United States)

Kalbar, Pradip P; Muñoz, Ivan; Birkved, Morten

2018-05-01

We present a second-generation wastewater treatment inventory model, WW LCI 2.0, which on many fronts represents considerable advances compared to its previous version WW LCI 1.0. WW LCI 2.0 is a novel and complete wastewater inventory model integrating WW LCI 1.0, i.e. a complete life cycle inventory, including infrastructure requirement, energy consumption and auxiliary materials applied for the treatment of wastewater and disposal of sludge and SewageLCI, i.e. fate modelling of chemicals released to the sewer. The model is expanded to account for different wastewater treatment levels, i.e. primary, secondary and tertiary treatment, independent treatment by septic tanks and also direct discharge to natural waters. Sludge disposal by means of composting is added as a new option. The model also includes a database containing statistics on wastewater treatment levels and sludge disposal patterns in 56 countries. The application of the new model is demonstrated using five chemicals assumed discharged to wastewater systems in four different countries. WW LCI 2.0 model results shows that chemicals such as diethylenetriamine penta (methylene phosphonic acid) (DTPMP) and Diclofenac, exhibit lower climate change (CC) and freshwater ecotoxicity (FET) burdens upon wastewater treatment compared to direct discharge in all country scenarios. Results for Ibuprofen and Acetaminophen (more readily degradable) show that the CC burden depends on the country-specific levels of wastewater treatment. Higher treatment levels lead to lower CC and FET burden compared to direct discharge. WW LCI 2.0 makes it possible to generate complete detailed life cycle inventories and fate analyses for chemicals released to wastewater systems. Our test of the WW LCI 2.0 model with five chemicals illustrates how the model can provide substantially different outcomes, compared to conventional wastewater inventory models, making the inventory dependent upon the atomic composition of the molecules

Update of Market Assessment for Capturing Water Conservation Opportunities in the Federal Sector

Energy Technology Data Exchange (ETDEWEB)

Mcmordie, Katherine; Solana, Amy E.; Elliott, Douglas B.; Sullivan, Gregory P.; Parker, Graham B.

2005-09-08

This updated market assessment for capturing water conservation opportunities in the Federal sector is based on a new analytical approach that utilizes newly available data and technologies. The new approach fine-tunes the original assessment by using actual Federal water use, which is now tracked by DOE (as compared to using estimated water use). Federal building inventory data is also used to disseminate water use by end-use technology in the Federal sector. In addition, this analysis also examines the current issues and obstacles that face performance contracting of water efficiency projects at Federal sites.

INVENTORY MANAGEMENT IN THE ENTERPRISE THROUGH THE APPLICATION OF IFRS 2 INVENTORIES

Directory of Open Access Journals (Sweden)

Svetlozar Stefanov

2016-07-01

Full Text Available The focus in the article is on the issues of valuation and presentation of the inventories under the meaning on the International Accounting Standard 2 Inventories. The Standard provides guidance on the determination of costs of finished products and its recognition as and expense in the production and sale finished products, including guidance for determination of the net realizable value. The latter is defined as the estimated selling price less the estimated costs of completion and estimated costs necessary to make the sale. The cost of inventories comprises all costs of purchase, cost of conversion and other costs incurred in bringing the inventories to a condition suitable for subsequent use. The amount of the cost for materials used or products sold and the finished product is determined using one of the following methods: a specifically defined value, first-in � first out or weighted average cost of lots delivered. When inventories are sold, the carrying amount of those inventories is recognized as an expense in the period in which the related sales revenue is recognized. The amount of any write-down of inventories to net realizable value is recorded as a current expense and is recognized as an expense in the period the write-down occurs.

Toward an Assessment of the Global Inventory of Present-Day Mercury Releases to Freshwater Environments

Directory of Open Access Journals (Sweden)

David Kocman

2017-02-01

Full Text Available Aquatic ecosystems are an essential component of the biogeochemical cycle of mercury (Hg, as inorganic Hg can be converted to toxic methylmercury (MeHg in these environments and reemissions of elemental Hg rival anthropogenic Hg releases on a global scale. Quantification of effluent Hg releases to aquatic systems globally has focused on discharges to the global oceans, rather than contributions to freshwater systems that affect local exposures and risks associated with MeHg. Here we produce a first-estimate of sector-specific, spatially resolved global aquatic Hg discharges to freshwater systems. We compare our release estimates to atmospheric sources that have been quantified elsewhere. By analyzing available quantitative and qualitative information, we estimate that present-day global Hg releases to freshwater environments (rivers and lakes associated with anthropogenic activities have a lower bound of ~1000 Mg· a−1. Artisanal and small-scale gold mining (ASGM represents the single largest source, followed by disposal of mercury-containing products and domestic waste water, metal production, and releases from industrial installations such as chlor-alkali plants and oil refineries. In addition to these direct anthropogenic inputs, diffuse inputs from land management activities and remobilization of Hg previously accumulated in terrestrial ecosystems are likely comparable in magnitude. Aquatic discharges of Hg are greatly understudied and further constraining associated data gaps is crucial for reducing the uncertainties in the global biogeochemical Hg budget.

World Glacier Inventory

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The World Glacier Inventory (WGI) contains information for over 130,000 glaciers. Inventory parameters include geographic location, area, length, orientation,...

SIGMA Release v1.2 - Capabilities, Enhancements and Fixes

Energy Technology Data Exchange (ETDEWEB)

Mahadevan, Vijay [Argonne National Lab. (ANL), Argonne, IL (United States); Grindeanu, Iulian R. [Argonne National Lab. (ANL), Argonne, IL (United States); Ray, Navamita [Argonne National Lab. (ANL), Argonne, IL (United States); Jain, Rajeev [Argonne National Lab. (ANL), Argonne, IL (United States); Wu, Danqing [Argonne National Lab. (ANL), Argonne, IL (United States)

2015-09-30

In this report, we present details on SIGMA toolkit along with its component structure, capabilities, and feature additions in FY15, release cycles, and continuous integration process. These software processes along with updated documentation are imperative to successfully integrate and utilize in several applications including the SHARP coupled analysis toolkit for reactor core systems funded under the NEAMS DOE-NE program.

SIGMA Release v1.2 - Capabilities, Enhancements and Fixes

International Nuclear Information System (INIS)

Mahadevan, Vijay; Grindeanu, Iulian R.; Ray, Navamita; Jain, Rajeev; Wu, Danqing

2015-01-01

In this report, we present details on SIGMA toolkit along with its component structure, capabilities, and feature additions in FY15, release cycles, and continuous integration process. These software processes along with updated documentation are imperative to successfully integrate and utilize in several applications including the SHARP coupled analysis toolkit for reactor core systems funded under the NEAMS DOE-NE program.

Environmental Release Prevention and Control Plan (ERP and CP) annual review and update for 1993

International Nuclear Information System (INIS)

Jannik, G.T.; Mamatey, A.; Arnett, M.

1993-01-01

In the Environmental Release Prevention and Control Plan (ERP and CP), WSRC made a commitment to conduct the following follow-up activities and actions: (1) Complete the action items developed in response to the findings and recommendation of the Environmental Release Prevention Taskteam (WSRC-RP-92-356). (2) Complete all batch and continuous release procedure revisions to incorporate the attributes that WSRC senior management required of each procedure. (3) DOE-SR Assistance Managers and WSRC counterparts to reach consensus and closure on the identified engineered solutions documented in the ERP and CP, develop and drive implementation of facility changes per the agreements. (4) Continue to analyze releases and monitor performance in accordance with the ERP and CP, and utilize the ALARA Release Guides Committee to drive improvements. (5) Conduct annual re-evaluations of the cost benefit analyses of the identified engineered solutions, and identify new options and alternatives for each outfall in response to site mission and facility changes. This report documents the efforts that have been completed over the past year in response to these commitments

Third national inventory of nuclear liabilities - main findings, lessons learned

International Nuclear Information System (INIS)

Cantarella, Jacques; Roger, Brigitte

2013-01-01

The safe management of a country's radioactive substances in both the short and the long term implies a cost to its present society and necessitates financial resources to cover these costs. Once they are needed, these financial resources may prove to be insufficient or even completely lacking, leading to a nuclear liability. By virtue of article 9 of the Belgian law of 12 December 1997, the Belgian Government wishes to avoid the occurrence of such nuclear liabilities. This law charges ONDRAF/NIRAS, the Belgian Agency for Radioactive Waste and Enriched Fissile Materials with the mission to draw up a register of the localisation and the state of all nuclear sites and all sites containing radioactive substances, to estimate the costs of their decommissioning and remediation, to evaluate the existence and adequacy of the provisions for financing these future or current operations and to update the resulting inventory of nuclear liabilities on a five-yearly basis. This paper outlines the methodology put in place by ONDRAF/NIRAS to accomplish this assignment and highlights some of the results of this third inventory. It then focuses on the main recommendations ONDRAF/NIRAS made to the Belgian Government on the field of avoiding potential nuclear liabilities. (authors)

Scaling up ATLAS Database Release Technology for the LHC Long Run

International Nuclear Information System (INIS)

Borodin, M; Nevski, P; Vaniachine, A

2011-01-01

To overcome scalability limitations in database access on the Grid, ATLAS introduced the Database Release technology replicating databases in files. For years Database Release technology assured scalable database access for Monte Carlo production on the Grid. Since previous CHEP, Database Release technology was used successfully in ATLAS data reprocessing on the Grid. Frozen Conditions DB snapshot guarantees reproducibility and transactional consistency isolating Grid data processing tasks from continuous conditions updates at the 'live' Oracle server. Database Release technology fully satisfies the requirements of ATLAS data reprocessing and Monte Carlo production. We parallelized the Database Release build workflow to avoid linear dependency of the build time on the length of LHC data-taking period. In recent data reprocessing campaigns the build time was reduced by an order of magnitude thanks to a proven master-worker architecture used in the Google MapReduce. We describe further Database Release optimizations scaling up the technology for the LHC long run.

Vendor-managed inventory

DEFF Research Database (Denmark)

Govindan, Kannan

2013-01-01

Vendor-managed inventory (VMI) represents the methodology through which the upstream stage of a supply chain (vendor) takes responsibility for managing the inventories at the downstream stage (customer) based on previously agreed limits. VMI is another method by which supply chains can be managed...... review, we have identified six dimensions of VMI: namely, inventory, transportation, manufacturing, general benefits, coordination/collaboration, and information sharing. In addition, there are, three methodological classifications: modelling, simulation, and case studies. Finally, we will consider...

An Approach for Forest Inventory in Canada's Northern Boreal region, Northwest Territories

Science.gov (United States)

Mahoney, C.; Hopkinson, C.; Hall, R.; Filiatrault, M.

2017-12-01

The northern extent of Canada's northern boreal forest is largely inaccessible resulting in logistical, financial, and human challenges with respect to obtaining concise and accurate forest resource inventory (FRI) attributes such as stand height, aboveground biomass and forest carbon stocks. This challenge is further exacerbated by mandated government resource management and reporting of key attributes with respect to assessing impacts of natural disturbances, monitoring wildlife habitat and establishing policies to mitigate effects of climate change. This study presents a framework methodology utilized to inventory canopy height and crown closure over a 420,000 km2 area in Canada's Northwest Territories (NWT) by integrating field, LiDAR and satellite remote sensing data. Attributes are propagated from available field to coincident airborne LiDAR thru to satellite laser altimetry footprints. A quality controlled form of the latter are then submitted to a k-nearest neighbor (kNN) imputation algorithm to produce a continuous map of each attribute on a 30 m grid. The resultant kNN stand height (r=0.62, p=0.00) and crown closure (r=0.64, p=0.00) products were identified as statistically similar to a comprehensive independent airborne LiDAR source. Regional uncertainty can be produced with each attribute to identify areas of potential improvement through future strategic data acquisitions or the fine tuning of model parameters. This study's framework concept was developed to inform Natural Resources Canada - Canadian Forest Service's Multisource Vegetation Inventory and update vast regions of Canada's northern forest inventories, however, its applicability can be generalized to any environment. Not only can such a framework approach incorporate other data sources (such as Synthetic Aperture Radar) to potentially better characterize forest attributes, but it can also utilize future Earth observation mission data (for example ICESat-2) to monitor forest dynamics and the

Scenarios for potential radionuclide release from marine reactors dumped in the Kara Sea

International Nuclear Information System (INIS)

Lynn, N.; Mount, M.; Gussgard, K.

1995-01-01

The largest inventory of radioactive materials dumped in the Kara Sea by the former Soviet Union comes from the spent nuclear fuel (SNF) of seven marine reactors, the current (1994) inventory of which makes a total of approximately 4.7x10 15 Bq. In progressing its work for the International Arctic Seas Assessment Project, under the auspices of the International Atomic Energy Agency, the Source Term Working Group has analysed the Source Term and subsequently developed a number of model scenarios for the potential release patterns of radionuclides into the Kara Sea from the SNF and activated components dumped within the marine reactors.These models are based on the present and future conditions of the barrier materials and their configuration within the dumped objects. They account for progressive corrosion of the outer and inner steel barriers, breakdown of the organic fillers, and degradation and leaching from the SNFs. Annual release rates are predicted to four thousand years into the future. 5 refs., 1 fig., 1 tab

Toxic Release Inventory (TRI) Facility Points, Region 9, 2012, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — A federal law called the Emergency Planning and Community Right to Know Act (EPCRA) gives the public the right to know about toxic chemicals being released into the...

Toxic Release Inventory (TRI) Facility Points, Region 9, 2014, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — A federal law called the Emergency Planning and Community Right to Know Act (EPCRA) gives the public the right to know about toxic chemicals being released into the...

Toxic Release Inventory (TRI) Facility Points, Region 9, 2011, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — A federal law called the Emergency Planning and Community Right to Know Act (EPCRA) gives the public the right to know about toxic chemicals being released into the...

Housing Inventory Count

Data.gov (United States)

Department of Housing and Urban Development — This report displays the data communities reported to HUD about the nature of their dedicated homeless inventory, referred to as their Housing Inventory Count (HIC)....

Three Mile Island nuclear reactor accident of March 1979. Environmental radiation data: Update 2, Volume III

International Nuclear Information System (INIS)

Hilton, B.A.; Grossman, R.F.

1981-03-01

The original report contains a listing of environmental radiation monitoring data collected in the vicinity of Three Mile Island (TMI) following the March 28, 1979 accident. These data were collected by the EPA, NRC, DOE, HHS, the Commonwealth of Pennsylvania, or the Bethlehem Steel Corporation. The original report was printed in September 1979 and the update was released in December 1979. This final update consists of additional data for 1979 by the same participating organizations, which has not been previously reported

27 CFR 40.201 - Inventories.

Science.gov (United States)

2010-04-01

... PROCESSED TOBACCO Operations by Manufacturers of Tobacco Products Inventories and Reports § 40.201 Inventories. Every manufacturer of tobacco products shall make true and accurate inventories on Form 5210.9... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Inventories. 40.201...

Use of ELOCA.Mk5 to calculate transient fission product release from CANDU fuel elements

International Nuclear Information System (INIS)

Walker, J.R.; de Vaal, J.W.; Arimescu, V.I.; McGrady, T.G.; Wong, C.

1992-04-01

A change in fuel element power output, or a change in heat transfer conditions, will result in an immediate change in the temperature distribution in a fuel element. The temperature distribution change will be accompanied by concomitant changes in fuel stress distribution that lead, in turn, to a release of fission products to the fuel-to-sheath gap. It is important to know the inventory of fission products in the fuel-to-sheath gap, because this inventory is a major component of the source term for many postulated reactor accidents. ELOCA.Mk5 is a FORTRAN-77 computer code that has been developed to estimate transient releases to the fuel-to-sheath gap in CANDU reactors. ELOCA.Mk5 is an integration of the FREEDOM fission product release model into the ELOCA fuel element thermo-mechanical code. The integration of FREEDOM into ELOCA allows ELOCA.Mk5 to model the feedback mechanisms between the fission product release and the thermo-mechanical response of the fuel element. This paper describes the physical model, gives details of the ELOCA.Mkt code, and describes the validation of the model. We demonstrate that the model gives good agreement with experimental results for both steady state and transient conditions

Demographic Data for Effective Programming: An Update on Sources and Successful Practice

Science.gov (United States)

Curtis, Katherine J.; Veroff, Daniel; Rizzo, Bill; Beaudoin, James

2012-01-01

This article details recent changes in demographic data released by the US Census Bureau and the implications for use among Extension educators. We discuss updates to demographic data products and the keys for their successful use. Focus is on the American Community Survey (ACS). Users must adopt new practices to effectively use the ACS, which now…

QUEST1 Variability Survey. III. Light Curve Catalog Update

Science.gov (United States)

Rengstorf, A. W.; Thompson, D. L.; Mufson, S. L.; Andrews, P.; Honeycutt, R. K.; Vivas, A. K.; Abad, C.; Adams, B.; Bailyn, C.; Baltay, C.; Bongiovanni, A.; Briceño, C.; Bruzual, G.; Coppi, P.; Della Prugna, F.; Emmet, W.; Ferrín, I.; Fuenmayor, F.; Gebhard, M.; Hernández, J.; Magris, G.; Musser, J.; Naranjo, O.; Oemler, A.; Rosenzweig, P.; Sabbey, C. N.; Sánchez, Ge.; Sánchez, Gu.; Schaefer, B.; Schenner, H.; Sinnott, J.; Snyder, J. A.; Sofia, S.; Stock, J.; van Altena, W.

2009-03-01

This paper reports an update to the QUEST1 (QUasar Equatorial Survey Team, Phase 1) Variability Survey (QVS) light curve catalog, which links QVS instrumental magnitude light curves to Sloan Digital Sky Survey (SDSS) objects and photometry. In the time since the original QVS catalog release, the overlap between publicly available SDSS data and QVS data has increased by 8% in sky coverage and 16,728 in number of matched objects. The astrometric matching and the treatment of SDSS masks have been refined for the updated catalog. We report on these improvements and present multiple bandpass light curves, global variability information, and matched SDSS photometry for 214,941 QUEST1 objects. Based on observations obtained at the Llano del Hato National Astronomical Observatory, operated by the Centro de Investigaciones de Astronomía for the Ministerio de Ciencia y Tecnologia of Venezuela.

Road and Street Centerlines, Buffalo County, WI road centerline file conflated with DOT WISLR attributes and updated continually based on survey plats, Published in 2002, 1:600 (1in=50ft) scale, Buffalo County Government.

Data.gov (United States)

NSGIC Local Govt | GIS Inventory — Road and Street Centerlines dataset current as of 2002. Buffalo County, WI road centerline file conflated with DOT WISLR attributes and updated continually based on...

Socioeconomic profile of Nye County, Nevada: Community services inventory

International Nuclear Information System (INIS)

1986-09-01

The Nevada Nuclear Waste Storage Investigations Project is preparing socioeconomic profiles of Nye County, Nevada, and communities in Nye County that could be affected by siting, construction, operation, and decommissioning of a high-level nuclear waste repository at Yucca Mountain, located in Nye County. These profiles serve as a data base for evaluating local community service impacts; store existing socioeconomic data in a uniform, readily accessible format; identify the need for additional data; and assist in developing a plan for monitoring and mitigating any significant adverse impacts that may be associated with site characterization and potential repository development. This element of the socioeconomic profiles contains an inventory of community services provided by local, county, and state agencies and volunteer organizations to residents of Amargosa Valley, Beatty, and Pahrump. Services inventoried for each community include housing, growth management, general government, education, police protection, transportation networks, public clinics, private health personnel, parks and recreation, social services, libraries, ambulances, electric power, heating fuel, water, sewers and wastewater treatment, solid waste, and fire protection. The report includes a summary overview of service providers in Nye County, discussions of services provided to residents of the three communities, and summary tables. Data presented in this profile were collected through early 1985. Data collection efforts are ongoing and this profile will be updated periodically

Spare Parts Inventory Management for the Next Generation Finnish Defense Force Fighter Fleet

Science.gov (United States)

2017-12-01

might benefit the end user most in high criticality or high cost classification classes: CrA, CrB, EA and EB. H. LEAD TIME EFFECTS Lead time is...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS Approved for public release. Distribution is unlimited. SPARE PARTS INVENTORY MANAGEMENT...Eddine Dahel THIS PAGE INTENTIONALLY LEFT BLANK i REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704–0188 Public reporting burden for this collection

Functional Assessment Inventory Manual.

Science.gov (United States)

Crewe, Nancy M.; Athelstan, Gary T.

This manual, which provides extensive new instructions for administering the Functional Assessment Inventory (FAI), is intended to enable counselors to begin using the inventory without undergoing any special training. The first two sections deal with the need for functional assessment and issues in the development and use of the inventory. The…

Critical Radionuclide and Pathway Analysis for the Savannah River Site, 2016 Update

Energy Technology Data Exchange (ETDEWEB)

Jannik, Tim [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hartman, Larry [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2016-09-08

During the operational history of Savannah River Site, many different radionuclides have been released from site facilities. However, as shown in this analysis, only a relatively small number of the released radionuclides have been significant contributors to doses to the offsite public. This report is an update to the 2011 analysis, Critical Radionuclide and Pathway Analysis for the Savannah River Site. SRS-based Performance Assessments for E-Area, Saltstone, F-Tank Farm, H-Tank Farm, and a Comprehensive SRS Composite Analysis have been completed. The critical radionuclides and pathways identified in those extensive reports are also detailed and included in this analysis.

Gridded anthropogenic emissions inventory and atmospheric transport of carbonyl sulfide in the U.S.: U.S. Anthropogenic COS Source and Transport

Energy Technology Data Exchange (ETDEWEB)

Zumkehr, Andrew [Sierra Nevada Research Institute, University of California, Merced California USA; Hilton, Timothy W. [Sierra Nevada Research Institute, University of California, Merced California USA; Whelan, Mary [Sierra Nevada Research Institute, University of California, Merced California USA; Smith, Steve [Joint Global Change Research Institute, PNNL, College Park Maryland USA; Campbell, J. Elliott [Sierra Nevada Research Institute, University of California, Merced California USA

2017-02-21

Carbonyl sulfide (COS or OCS), the most abundant sulfur containing gas in the troposphere, has recently emerged as a potentially important atmospheric tracer for the carbon cycle. Atmospheric inverse modeling studies may be able to use existing tower, airborne, and satellite observations of COS to infer information about photosynthesis. However, such analysis relies on gridded anthropogenic COS source estimates that are largely based on industry activity data from over three decades ago. Here we use updated emission factor data and industry activity data to develop a gridded inventory with a 0.1 degree resolution for the U.S. domain. The inventory includes the primary anthropogenic COS sources including direct emissions from the coal and aluminum industries as well as indirect sources from industrial carbon disulfide emissions. Compared to the previously published inventory, we found that the total anthropogenic source (direct and indirect) is 47% smaller. Using this new gridded inventory to drive the STEM/WRF atmospheric transport model, we found that the anthropogenic contribution to COS variation in the troposphere is small relative to the biosphere influence, which is encouraging of carbon cycle applications in this region. Additional anthropogenic sectors with highly uncertain emission factors require further field measurements.

ICPP water inventory study project summary report

International Nuclear Information System (INIS)

Richards, B.T.

1994-01-01

The Idaho Chemical Processing Plant (ICPP) Water inventory Study was initiated in September 1993 with the formation of a joint working group consisting of representatives from DOE-ID, State of Idaho INEL Oversight Program, US Geological Survey, and INEL employees to investigate three issues that had been identified by the INEL Oversight Program at ICPP: (1) the water inventory imbalance at ICPP, (2) the source of water infiltrating into the Tank Farm vault sumps, and (3) the source of water providing potential recharge to perched water bodies underlying ICPP. These issues suggested that water was being lost from the ICPP distribution system. The INEL Oversight Program was concerned that the unaccounted for water at ICPP could be spreading contaminants that have been released over the past 40 years of operations of ICPP, possibly to the Snake River Plain Aquifer. This report summarizes the findings of each of the component investigations that were undertaken to resolve each of the three issues. Concerns about the risk of spreading contaminants will be resolved as part of the Remedial Investigation/Feasibility Study being undertaken at ICPP in compliance with the Federal Facility Agreement and Consent Order between DOE-H), EPA, and the State of Idaho. This report will be a key input to that study

Evaluating Bay Area Methane Emission Inventory

Energy Technology Data Exchange (ETDEWEB)

Fischer, Marc [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Jeong, Seongeun [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2016-03-01

As a regulatory agency, evaluating and improving estimates of methane (CH4) emissions from the San Francisco Bay Area is an area of interest to the Bay Area Air Quality Management District (BAAQMD). Currently, regional, state, and federal agencies generally estimate methane emissions using bottom-up inventory methods that rely on a combination of activity data, emission factors, biogeochemical models and other information. Recent atmospheric top-down measurement estimates of methane emissions for the US as a whole (e.g., Miller et al., 2013) and in California (e.g., Jeong et al., 2013; Peischl et al., 2013) have shown inventories underestimate total methane emissions by ~ 50% in many areas of California, including the SF Bay Area (Fairley and Fischer, 2015). The goal of this research is to provide information to help improve methane emission estimates for the San Francisco Bay Area. The research effort builds upon our previous work that produced methane emission maps for each of the major source sectors as part of the California Greenhouse Gas Emissions Measurement (CALGEM) project (http://calgem.lbl.gov/prior_emission.html; Jeong et al., 2012; Jeong et al., 2013; Jeong et al., 2014). Working with BAAQMD, we evaluate the existing inventory in light of recently published literature and revise the CALGEM CH4 emission maps to provide better specificity for BAAQMD. We also suggest further research that will improve emission estimates. To accomplish the goals, we reviewed the current BAAQMD inventory, and compared its method with those from the state inventory from the California Air Resources Board (CARB), the CALGEM inventory, and recent published literature. We also updated activity data (e.g., livestock statistics) to reflect recent changes and to better represent spatial information. Then, we produced spatially explicit CH4 emission estimates on the 1-km modeling grid used by BAAQMD. We present the detailed activity data, methods and derived emission maps by sector

Optimal fuel inventory strategies

International Nuclear Information System (INIS)

Caspary, P.J.; Hollibaugh, J.B.; Licklider, P.L.; Patel, K.P.

1990-01-01

In an effort to maintain their competitive edge, most utilities are reevaluating many of their conventional practices and policies in an effort to further minimize customer revenue requirements without sacrificing system reliability. Over the past several years, Illinois Power has been rethinking its traditional fuel inventory strategies, recognizing that coal supplies are competitive and plentiful and that carrying charges on inventory are expensive. To help the Company achieve one of its strategic corporate goals, an optimal fuel inventory study was performed for its five major coal-fired generating stations. The purpose of this paper is to briefly describe Illinois Power's system and past practices concerning coal inventories, highlight the analytical process behind the optimal fuel inventory study, and discuss some of the recent experiences affecting coal deliveries and economic dispatch

The Movement Disorder Society Evidence-Based Medicine Review Update: Treatments for the motor symptoms of Parkinson's disease.

Science.gov (United States)

Fox, Susan H; Katzenschlager, Regina; Lim, Shen-Yang; Ravina, Bernard; Seppi, Klaus; Coelho, Miguel; Poewe, Werner; Rascol, Olivier; Goetz, Christopher G; Sampaio, Cristina

2011-10-01

The objective was to update previous evidence-based medicine reviews of treatments for motor symptoms of Parkinson's disease published between 2002 and 2005. Level I (randomized, controlled trial) reports of pharmacological, surgical, and nonpharmacological interventions for the motor symptoms of Parkinson's disease between January 2004 (2001 for nonpharmacological) and December 2010 were reviewed. Criteria for inclusion, clinical indications, ranking, efficacy conclusions, safety, and implications for clinical practice followed the original program outline and adhered to evidence-based medicine methodology. Sixty-eight new studies qualified for review. Piribedil, pramipexole, pramipexole extended release, ropinirole, rotigotine, cabergoline, and pergolide were all efficacious as symptomatic monotherapy; ropinirole prolonged release was likely efficacious. All were efficacious as a symptomatic adjunct except pramipexole extended release, for which there is insufficient evidence. For prevention/delay of motor fluctuations, pramipexole and cabergoline were efficacious, and for prevention/delay of dyskinesia, pramipexole, ropinirole, ropinirole prolonged release, and cabergoline were all efficacious, whereas pergolide was likely efficacious. Duodenal infusion of levodopa was likely efficacious in the treatment of motor complications, but the practice implication is investigational. Entacapone was nonefficacious as a symptomatic adjunct to levodopa in nonfluctuating patients and nonefficacious in the prevention/delay of motor complications. Rasagiline conclusions were revised to efficacious as a symptomatic adjunct, and as treatment for motor fluctuations. Clozapine was efficacious in dyskinesia, but because of safety issues, the practice implication is possibly useful. Bilateral subthalamic nucleus deep brain stimulation, bilateral globus pallidus stimulation, and unilateral pallidotomy were updated to efficacious for motor complications. Physical therapy was revised

A single-item inventory model for expected inventory order crossovers

NARCIS (Netherlands)

Riezebos, J.; Gaalman, G.J.C.

2009-01-01

Expected inventory order crossovers Occur if at the moment of ordering it is expected that orders will not arrive in the sequence they are ordered. Recent research has shown that (it) expected inventory order crossovers will be encountered more frequently in future, and that (b) use of a myopic

Controlling Inventory: Real-World Mathematical Modeling

Science.gov (United States)

Edwards, Thomas G.; Özgün-Koca, S. Asli; Chelst, Kenneth R.

2013-01-01

Amazon, Walmart, and other large-scale retailers owe their success partly to efficient inventory management. For such firms, holding too little inventory risks losing sales, whereas holding idle inventory wastes money. Therefore profits hinge on the inventory level chosen. In this activity, students investigate a simplified inventory-control…

[Inventories of atmospheric arsenic emissions from coal combustion in China, 2005].

Science.gov (United States)

Tian, He-Zhong; Qu, Yi-Ping

2009-04-15

Anthropogenic arsenic (As) emitted from coal combustion is one of key trace elements leading to negative air pollution and national economy loss. It is of great significance to estimate the atmospheric arsenic emission for proposing relevant laws or regulations and selecting proper pollution control technologies. The inventories of atmospheric arsenic emissions from coal combustion in China were evaluated by adopting the emission factor method based on fuel consumption. Arsenic emission sources were firstly classified into several categories by economic sectors, combustion types and pollution control technologies. Then, according to provincial coal consumption and averaged arsenic concentration in the feed fuel, the inventories of atmospheric arsenic emission from coal combustion in China in 2005 were established. Coal outputand consumption in China in 2005 were 2,119.8 and 2,099.8 Mt, respectively. The total emissions of arsenic released into the atmosphere in 2005 in China were estimated at about 1,564.4 t, and Shandong ranked the largest province with 144.4 t arsenic release, followed by Hunan (141.1 t), Hebei (108.5 t), Henan (77.7 t), and Jiangsu (77.0 t), which were mainly concentrated in the eastern and central provinces of China. The arsenic emissions were largely emitted by industry sector (818.8 t) and thermal power generation sector (303.4 t), contributing 52.3% and 19.4% of the totals, respectively. About 375.5 t arsenic was estimated to be released into the atmosphere in the form of gas phase in China in 2005, with a share of 24% of the totals. In general, arsenic pollution control from coal combustion should be highlighted for the power and industry sectors in the whole country. However, arsenic poisoning caused by residential coal burning should also be paid great attention in some areas such as Xinjiang, Gansu, Qinghai and Guishou.

Reporting releases of hazardous substances under CERCLA and EPCRA

International Nuclear Information System (INIS)

Dailey, R.

1990-04-01

Several federal environmental laws requires that ''release of hazardous substances to the environment'' above certain threshold amounts -- Reportable Quantities or RQs -- be reported. Current and proposed regulations under these statutes are unclear and make full compliance difficult. Nevertheless, failure to comply could result in civil or criminal penalties. In response to questions raised by several DOE Field Elements, this Information Brief is part of a series that will provide updated information on this and other CERCLA issues. The Environmental Guidance Division (EH-231) has responded to those questions relating the reporting of releases for which EPA has a clearly articulated position. EPA's position on other questions raised by Field Elements has been equivocal; DOE is working with EPA to resolve these outstanding issues. Additional information briefs on reporting releases will be issued as a clear position is defined

21 CFR 1304.11 - Inventory requirements.

Science.gov (United States)

2010-04-01

... the inventory of the registered location to which they are subject to control or to which the person... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Inventory requirements. 1304.11 Section 1304.11... REGISTRANTS Inventory Requirements § 1304.11 Inventory requirements. (a) General requirements. Each inventory...

Fission-product release modelling in the ASTEC integral code: the status of the ELSA module

International Nuclear Information System (INIS)

Plumecocq, W.; Kissane, M.P.; Manenc, H.; Giordano, P.

2003-01-01

Safety assessment of water-cooled nuclear reactors encompasses potential severe accidents where, in particular, the release of fission products (FPs) and actinides into the reactor coolant system (RCS) is evaluated. The ELSA module is used in the ASTEC integral code to model all releases into the RCS. A wide variety of experiments is used for validation: small-scale CRL, ORNL and VERCORS tests; large-scale Phebus-FP tests; etc. Being a tool that covers intact fuel and degraded states, ELSA is being improved maximizing the use of information from degradation modelling. Short-term improvements will include some treatment of initial FP release due to intergranular inventories and implementing models for release of additional structural materials (Sn, Fe, etc.). (author)

40 CFR 710.39 - How do I submit the required information?

Science.gov (United States)

2010-07-01

... SUBSTANCES CONTROL ACT TSCA CHEMICAL INVENTORY REGULATIONS 2002 Inventory Update Reporting § 710.39 How do I... at the following address: OPPT Document Control Officer, Mail Code 7407M, ATTN: Inventory Update Rule... Partial Updating of the TSCA Chemical Inventory Data Base,” via the Internet or the TSCA Hotline. (c...

40 CFR 710.59 - Availability of reporting form and instructions.

Science.gov (United States)

2010-07-01

... SUBSTANCES CONTROL ACT TSCA CHEMICAL INVENTORY REGULATIONS Inventory Update Reporting for 2006 and Beyond... for the 2006 Partial Updating of the TSCA Chemical Inventory Database,” are available as described in... website. Go to the EPA Inventory Update Reporting Internet home page at http://www.epa.gov/oppt/iur and...

textbf{Historical Usage Inventories of DDT in China}

Science.gov (United States)

Qiang, Wang; Lijuan, Zhao; Jianxin, Hu

2010-05-01

Dichlorodiphenyltrichloroethane (DDT) is one of organochlorine pesticides and listed as one of the persistent organic pollutants to be reduced and finally eliminated in the Stockholm Convention on Persistent Organic Pollutants, because of its great persistence, toxics, bio-accumulation and potential for long-range transport. It is critical to create national DDT usage/emission inventories for China to carry out source-receptor relation analysis, risk assessment, and other research related to DDT in this country. Chinese inventories of DDT to the year1983 have been published; however, DDT is still being used indirectly in the dicifol producing and being applied for malaria control in case. Therefore it is needed to supplement and update the inventories. DDT production in China can be divided into three phases. Prior to 1965 is the first stage with an annual output of no more than 10,000 tons; 1966-1983 is the second phase. At this stage DDT was produced with an average annual production of 15,500 tons. After 1984 is the third production phase, of which the average annual DDT production was 6,465 tons. Before 1983, DDT was mainly used for agriculture, forestry and pesticides.China used a total of 270,000 tons of DDT during 1951 - 1983. According to China's cropland area, Li Yi-fan create China's DDT usage inventory of 1951-1983. In 1983 the State Council decided to ban DDT producing and DDT is no longer used in agriculture any more, but it is still being used in the producing of dicofol, malaria prevention and treatment anda small amount for export. To this end, this paper calculated theusage inventory of China's DDT from 1984 to 2003. Using sown areas of cotton, apple, citrus, tea and vegetable as surrogate data, usage of dicifolwas calculated, then the usage inventory of DDT resulting from dicofol use and DDT applied for malaria control with prefecture resolution was created. From 1984 to 2003, China used 15,312 tons of DDT, including 12,912 tons of DDT resulting

Procedure for taking physical inventories

International Nuclear Information System (INIS)

Boston, R.A.

1984-01-01

Physical inventories are taken periodically to meet Company, State and IAEA requirements. Those physical inventories may be verified by IAEA and/or State inspectors. This presentation describes in an introductory but detailed manner the approaches and procedures used in planning, preparing, conducting, reconciling and reporting physical inventories for the Model Plant. Physical inventories are taken for plant accounting purposes to provide an accurate basis for starting and closing the plant material balance. Physical inventories are also taken for safeguards purposes to provide positive assurance that the nuclear materials of concern are indeed present and accounted for

Fukushima - calculation of the reactor core inventory and storage pools Dai-ichi 1 to Dai-ichi 4, an estimation of a source term

International Nuclear Information System (INIS)

Krpelanova, M.; Carny, P.

2011-01-01

Inventory of the reactor core and spent fuel storage pool of the reactors at Dai-ichi 1 to Dai-ichi 4 was determined to need a realistic estimate of the source (released into the atmosphere environment) and modelling of radiological impact of the events in Fukushima NPP. Calculations of inventories were carried out by the methodology that is used in systems to support emergency response and crisis management anymore. Calculations were made based on a model that respects knowledge of real fuels and fuel cycles for individual reactors Dai-ichi. Necessary input data for training the model and calculate inventories are obtained from the IAEA PRIS database.

Planck 2013 results. XXXII. The updated Planck catalogue of Sunyaev-Zeldovich sources

Science.gov (United States)

Planck Collaboration; Ade, P. A. R.; Aghanim, N.; Armitage-Caplan, C.; Arnaud, M.; Ashdown, M.; Atrio-Barandela, F.; Aumont, J.; Aussel, H.; Baccigalupi, C.; Banday, A. J.; Barreiro, R. B.; Barrena, R.; Bartelmann, M.; Bartlett, J. G.; Battaner, E.; Benabed, K.; Benoît, A.; Benoit-Lévy, A.; Bernard, J.-P.; Bersanelli, M.; Bielewicz, P.; Bikmaev, I.; Bobin, J.; Bock, J. J.; Böhringer, H.; Bonaldi, A.; Bond, J. R.; Borrill, J.; Bouchet, F. R.; Bridges, M.; Bucher, M.; Burenin, R.; Burigana, C.; Butler, R. C.; Cardoso, J.-F.; Carvalho, P.; Catalano, A.; Challinor, A.; Chamballu, A.; Chary, R.-R.; Chen, X.; Chiang, H. C.; Chiang, L.-Y.; Chon, G.; Christensen, P. R.; Churazov, E.; Church, S.; Clements, D. L.; Colombi, S.; Colombo, L. P. L.; Comis, B.; Couchot, F.; Coulais, A.; Crill, B. P.; Curto, A.; Cuttaia, F.; Da Silva, A.; Dahle, H.; Danese, L.; Davies, R. D.; Davis, R. J.; de Bernardis, P.; de Rosa, A.; de Zotti, G.; Delabrouille, J.; Delouis, J.-M.; Démoclès, J.; Désert, F.-X.; Dickinson, C.; Diego, J. M.; Dolag, K.; Dole, H.; Donzelli, S.; Doré, O.; Douspis, M.; Dupac, X.; Efstathiou, G.; Enßlin, T. A.; Eriksen, H. K.; Feroz, F.; Ferragamo, A.; Finelli, F.; Flores-Cacho, I.; Forni, O.; Frailis, M.; Franceschi, E.; Fromenteau, S.; Galeotta, S.; Ganga, K.; Génova-Santos, R. T.; Giard, M.; Giardino, G.; Gilfanov, M.; Giraud-Héraud, Y.; González-Nuevo, J.; Górski, K. M.; Grainge, K. J. B.; Gratton, S.; Gregorio, A.; Groeneboom, N., E.; Gruppuso, A.; Hansen, F. K.; Hanson, D.; Harrison, D.; Hempel, A.; Henrot-Versillé, S.; Hernández-Monteagudo, C.; Herranz, D.; Hildebrandt, S. R.; Hivon, E.; Hobson, M.; Holmes, W. A.; Hornstrup, A.; Hovest, W.; Huffenberger, K. M.; Hurier, G.; Hurley-Walker, N.; Jaffe, A. H.; Jaffe, T. R.; Jones, W. C.; Juvela, M.; Keihänen, E.; Keskitalo, R.; Khamitov, I.; Kisner, T. S.; Kneissl, R.; Knoche, J.; Knox, L.; Kunz, M.; Kurki-Suonio, H.; Lagache, G.; Lähteenmäki, A.; Lamarre, J.-M.; Lasenby, A.; Laureijs, R. J.; Lawrence, C. R.; Leahy, J. P.; Leonardi, R.; León-Tavares, J.; Lesgourgues, J.; Li, C.; Liddle, A.; Liguori, M.; Lilje, P. B.; Linden-Vørnle, M.; López-Caniego, M.; Lubin, P. M.; Macías-Pérez, J. F.; MacTavish, C. J.; Maffei, B.; Maino, D.; Mandolesi, N.; Maris, M.; Marshall, D. J.; Martin, P. G.; Martínez-González, E.; Masi, S.; Massardi, M.; Matarrese, S.; Matthai, F.; Mazzotta, P.; Mei, S.; Meinhold, P. R.; Melchiorri, A.; Melin, J.-B.; Mendes, L.; Mennella, A.; Migliaccio, M.; Mikkelsen, K.; Mitra, S.; Miville-Deschênes, M.-A.; Moneti, A.; Montier, L.; Morgante, G.; Mortlock, D.; Munshi, D.; Murphy, J. A.; Naselsky, P.; Nastasi, A.; Nati, F.; Natoli, P.; Nesvadba, N. P. H.; Netterfield, C. B.; Nørgaard-Nielsen, H. U.; Noviello, F.; Novikov, D.; Novikov, I.; O'Dwyer, I. J.; Olamaie, M.; Osborne, S.; Oxborrow, C. A.; Paci, F.; Pagano, L.; Pajot, F.; Paoletti, D.; Pasian, F.; Patanchon, G.; Pearson, T. J.; Perdereau, O.; Perotto, L.; Perrott, Y. C.; Perrotta, F.; Piacentini, F.; Piat, M.; Pierpaoli, E.; Pietrobon, D.; Plaszczynski, S.; Pointecouteau, E.; Polenta, G.; Ponthieu, N.; Popa, L.; Poutanen, T.; Pratt, G. W.; Prézeau, G.; Prunet, S.; Puget, J.-L.; Rachen, J. P.; Reach, W. T.; Rebolo, R.; Reinecke, M.; Remazeilles, M.; Renault, C.; Ricciardi, S.; Riller, T.; Ristorcelli, I.; Rocha, G.; Rosset, C.; Roudier, G.; Rowan-Robinson, M.; Rubiño-Martín, J. A.; Rumsey, C.; Rusholme, B.; Sandri, M.; Santos, D.; Saunders, R. D. E.; Savini, G.; Schammel, M. P.; Scott, D.; Seiffert, M. D.; Shellard, E. P. S.; Shimwell, T. W.; Spencer, L. D.; Starck, J.-L.; Stolyarov, V.; Stompor, R.; Streblyanska, A.; Sudiwala, R.; Sunyaev, R.; Sureau, F.; Sutton, D.; Suur-Uski, A.-S.; Sygnet, J.-F.; Tauber, J. A.; Tavagnacco, D.; Terenzi, L.; Toffolatti, L.; Tomasi, M.; Tramonte, D.; Tristram, M.; Tucci, M.; Tuovinen, J.; Türler, M.; Umana, G.; Valenziano, L.; Valiviita, J.; Van Tent, B.; Vibert, L.; Vielva, P.; Villa, F.; Vittorio, N.; Wade, L. A.; Wandelt, B. D.; White, M.; White, S. D. M.; Yvon, D.; Zacchei, A.; Zonca, A.

2015-09-01

We update the all-sky Planck catalogue of 1227 clusters and cluster candidates (PSZ1) published in March 2013, derived from detections of the Sunyaev-Zeldovich (SZ) effect using the first 15.5 months of Planck satellite observations. As an addendum, we deliver an updated version of the PSZ1 catalogue, reporting the further confirmation of 86 Planck-discovered clusters. In total, the PSZ1 now contains 947 confirmed clusters, of which 214 were confirmed as newly discovered clusters through follow-up observations undertaken by the Planck Collaboration. The updated PSZ1 contains redshifts for 913 systems, of which 736 (~ 80.6%) are spectroscopic, and associated mass estimates derived from the Yz mass proxy. We also provide a new SZ quality flag for the remaining 280 candidates. This flag was derived from a novel artificial neural-network classification of the SZ signal. Based on this assessment, the purity of the updated PSZ1 catalogue is estimated to be 94%. In this release, we provide the full updated catalogue and an additional readme file with further information on the Planck SZ detections. The catalogue is only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (ftp://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/581/A14

Initial Radionuclide Inventories

Energy Technology Data Exchange (ETDEWEB)

H. Miller

2004-09-19

The purpose of this analysis is to provide an initial radionuclide inventory (in grams per waste package) and associated uncertainty distributions for use in the Total System Performance Assessment for the License Application (TSPA-LA) in support of the license application for the repository at Yucca Mountain, Nevada. This document is intended for use in postclosure analysis only. Bounding waste stream information and data were collected that capture probable limits. For commercially generated waste, this analysis considers alternative waste stream projections to bound the characteristics of wastes likely to be encountered using arrival scenarios that potentially impact the commercial spent nuclear fuel (CSNF) waste stream. For TSPA-LA, this radionuclide inventory analysis considers U.S. Department of Energy (DOE) high-level radioactive waste (DHLW) glass and two types of spent nuclear fuel (SNF): CSNF and DOE-owned (DSNF). These wastes are placed in two groups of waste packages: the CSNF waste package and the codisposal waste package (CDSP), which are designated to contain DHLW glass and DSNF, or DHLW glass only. The radionuclide inventory for naval SNF is provided separately in the classified ''Naval Nuclear Propulsion Program Technical Support Document'' for the License Application. As noted previously, the radionuclide inventory data presented here is intended only for TSPA-LA postclosure calculations. It is not applicable to preclosure safety calculations. Safe storage, transportation, and ultimate disposal of these wastes require safety analyses to support the design and licensing of repository equipment and facilities. These analyses will require radionuclide inventories to represent the radioactive source term that must be accommodated during handling, storage and disposition of these wastes. This analysis uses the best available information to identify the radionuclide inventory that is expected at the last year of last emplacement

Development of an inventory/archive program for the retention, management, and disposition of tank characterization samples at the 222-S laboratory

International Nuclear Information System (INIS)

Seidel, C.M.

1998-01-01

The Hanford Tank Waste Remediation Systems (TWRS) Characterization Program is responsible for coordinating the sampling and analysis of the 177 large underground storage tanks at the Hanford site. The 222-S laboratory has been the primary laboratory for chemical analysis of this highly-radioactive material and has been accumulating these samples for many years. As part of the Fiscal Year 1998 laboratory work scope, the 222-S laboratory has performed a formal physical inventory of all tank characterization samples which are currently being stored. In addition, an updated inventory/archive program has been designed. This program defines sample storage, retention, consolidation, maintenance, and disposition activities which will ensure that the sample integrity is preserved to the greatest practical extent. In addition, the new program provides for continued availability of waste material in a form which will be useful for future bench-scale studies. Finally, when the samples have exceeded their useful lifetime, the program provides for sample disposition from,the laboratory in a controlled, safe and environmentally compliant manner. The 222-S laboratory maintains custody over samples of tank waste material which have been shipped to the laboratory for chemical analysis. The storage of these samples currently requires an entire hotcell, fully dedicated to sample archive storage, and is rapidly encroaching on additional hotcell space. As additional samples are received, they are beginning to limit the 222-S laboratory hotcell utility for other activities such as sample extrusion and subsampling. The 222-S laboratory tracks the number of sample containers and the mass of each sample through an internal database which has recently been verified and updated via a physical inventory

Validation of Schema Coping Inventory and Schema Mode Inventory in Adolescents

NARCIS (Netherlands)

van Wijk-Herbrink, M.F.; Roelofs, J.; Broers, N.J.; Rijkeboer, M.M.; Arntz, A.; Bernstein, D.P.

2018-01-01

This study investigated whether the schema therapy constructs of schema coping and schema modes have validity in adolescents. We examined the validity and reliability of the Schema Coping Inventory (SCI) and an 80-item version of the Schema Mode Inventory (SMI) in a mixed sample of adolescents.

Influence of start up and pulsed operation on tritium release and inventory of NET ceramic blanket

International Nuclear Information System (INIS)

Iseli, M.; Esser, B.

1989-01-01

A first estimate for the tritium release behaviour of a ceramic breeder blanket in pulsed operation is obtained by assuming a linear steady state temperature distribution and taking into account the time constant of the thermal behaviour. The release behaviour of the breeder exposed to consecutive periods of tritium generation is described with an analytical solution of the diffusion equation. The results are compared with a simple exponential approach valid for surfacte desorption controlled release. The exponential model is used to simulate a blanket with aluminate as breeder material, which takes longest to reach steady state. The simulation demonstrates that a significant fraction (>67%) of steady state can be achieved after a testing time of about one day. (author). 7 refs.; 8 figs.; 3 tabs

Environmental Carcinogen Releases and Lung Cancer Mortality in Rural-Urban Areas of the United States

Science.gov (United States)

Luo, Juhua; Hendryx, Michael

2011-01-01

Purpose: Environmental hazards are unevenly distributed across communities and populations; however, little is known about the distribution of environmental carcinogenic pollutants and lung cancer risk across populations defined by race, sex, and rural-urban setting. Methods: We used the Toxics Release Inventory (TRI) database to conduct an…

An ESME update, v. 8.05

International Nuclear Information System (INIS)

MacLachlan, J.A.

1993-01-01

The program ESME for modeling the longitudinal degree of freedom of beam dynamics in proton synchrotrons is described in the ''User's Guide to ESME v. 8.0'' released 8 March 1993. This note updates the User's Guide to the state of the code at 15 June 1993. To simplify moving the code to the various UNIX machines at Fermilab and sharing it with other laboratories, it has been decided to promote the HIGZ graphics version. A few new graphics parameters are described which have been introduced in consequence. This note also corrects minor errors and omissions in the User's Guide and reports minor program enhancements. No errors producing wrong results have been found

On Inventory Control For Perishable Inventory Systems Subject To Uncertainties On Customer Demands

OpenAIRE

Abbou , Rosa; Loiseau , Jean-Jacques; Khaldi , Hajer; Farraa , Berna ,

2017-01-01

International audience; This paper deals with the inventory controller design for constrained production systems subject to uncertainties on the customer demands. The case study focuses on the inventory regulation problem in production systems where contain perishable finite products. Such systems are characterized by the presence of delays due to production processes, and constraints from the instantaneous inventory level, production level and the finite capacities of stocks. To do that, we ...

In-pile test of tritium release from tritium breeding materials (VOM-21H experiment)

International Nuclear Information System (INIS)

Kurasawa, Toshimasa; Takeshita, Hidefumi; Watanabe, Hitoshi; Yoshida, Hiroshi.

1986-10-01

Material development and blanket design of lithium-based ceramics such as lithium oxide, lithium aluminate, lithium silicate and lithium zirconate have been performed in Japan, United State of America and Europian Communities. Lithium oxide is a most attractive candidate for tritium breeding materials because of its high lithium density, high thermal conductivity and good tritium release performance. This work has been done to clarify the characteristics of tritium release and recovery from Li 2 O by means of in-situ tritium release measurement. The effects of temperature and sweep gas composition on the tritium release were investigated in this VOM-21H Experiment. Good measurement of tritium release was achieved but there were uncertainties in reproduciblity of data. The experimental results show that the role of surface adsorption/desorption makes a significant contribution to the tritium release and tritium inventory. Also, it is necessary to define the rate limiting process either diffusion or surface adsorption/desorption. (author)

Denmark's National Inventory Report 2010

DEFF Research Database (Denmark)

Nielsen, Ole-Kenneth; Lyck, Erik; Mikkelsen, Mette Hjorth

2010-01-01

This report is Denmark's National Inventory Report 2010. The report contains information on Denmark's emission inventories for all years' from 1990 to 2008 for CO2, CH4, N2O, HFCs, PFCs and SF6, NOx, CO, NMVOC, SO2.......This report is Denmark's National Inventory Report 2010. The report contains information on Denmark's emission inventories for all years' from 1990 to 2008 for CO2, CH4, N2O, HFCs, PFCs and SF6, NOx, CO, NMVOC, SO2....

HHS Enterprise Data Inventory

Data.gov (United States)

U.S. Department of Health & Human Services — The Enterprise Data Inventory (EDI) is the comprehensive inventory listing of agency data resources including public, restricted public, and non-public datasets.

27 CFR 20.170 - Physical inventory.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Physical inventory. 20.170... Users of Specially Denatured Spirits Inventory and Records § 20.170 Physical inventory. Once in each... physical inventory of each formula of new and recovered specially denatured spirits. (Approved by the...

Endogenous Business Cycle Dynamics within Metzlers Inventory Model: Adding an Inventory Floor.

Science.gov (United States)

Sushko, Irina; Wegener, Michael; Westerhoff, Frank; Zaklan, Georg

2009-04-01

Metzlers inventory model may produce dampened fluctuations in economic activity, thus contributing to our understanding of business cycle dynamics. For some parameter combinations, however, the model generates oscillations with increasing amplitude, implying that the inventory stock of firms eventually turns negative. Taking this observation into account, we reformulate Metzlers model by simply putting a floor to the inventory level. Within the new piecewise linear model, endogenous business cycle dynamics may now be triggered via a center bifurcation, i.e. for certain parameter combinations production changes are (quasi-)periodic.

Savannah River Plant's Accountability Inventory Management System (AIMS) (Nuclear materials inventory control)

International Nuclear Information System (INIS)

Croom, R.G.

1976-06-01

The Accountability Inventory Management System (AIMS) is a new computer inventory control system for nuclear materials at the Savannah River Plant, Aiken, South Carolina. The system has two major components, inventory files and system parameter files. AIMS, part of the overall safeguards program, maintains an up-to-date record of nuclear material by location, produces reports required by ERDA in addition to onplant reports, and is capable of a wide range of response to changing input/output requirements through use of user-prepared parameter cards, as opposed to basic system reprogramming

27 CFR 40.523 - Inventories.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Inventories. 40.523... PROCESSED TOBACCO Manufacture of Processed Tobacco Operations by Manufacturers of Processed Tobacco § 40.523 Inventories. Every manufacturer of processed tobacco must provide a true and accurate inventory on TTB F 5210...

Hydrogen inventory in gallium

International Nuclear Information System (INIS)

Mazayev, S.N.; Prokofiev, Yu.G.

1994-01-01

Investigations of hydrogen inventory in gallium (99.9%) were carried out after saturation both from molecular phase and from glow discharge plasma at room temperature, 370 and 520 K. Saturation took place during 3000 s under hydrogen pressure of 20 Pa, and ion flux was about 1x10 15 ions/cm 2 s with an energy about 400 eV during discharge. Hydrogen concentration in Ga at room temperature and that for 370 K by the saturation from gaseous phase was (2-3)x10 14 cm -3 Pa -1/2 . Hydrogen concentration at temperature 520 K increased by five times. Inventory at room temperature for irradiation from discharge was 7x10 16 cm -3 at the dose about 3x10 18 ions/cm 2 . It was more than inventory at temperature 520 K by four times and more than maximum inventory from gaseous phase at 520 K by a factor of 10. Inventory increased when temperature decreased. Diffusion coefficient D=0.003 exp(-2300/RT) cm 2 /s, was estimated from temperature dependence. ((orig.))

Nuclear materials inventory plan

International Nuclear Information System (INIS)

Doerr, R.W.; Nichols, D.H.

1982-03-01

In any processing, manufacturing, or active storage facility it is impractical to assume that any physical security system can prevent the diversion of Special Nuclear Material (SNM). It is, therefore, the responsibility of any DOE Contractor, Licensee, or other holder of SNM to provide assurance that loss or diversion of a significant quantity of SNM is detectable. This ability to detect must be accomplishable within a reasonable time interval and can be accomplished only by taking physical inventories. The information gained and decisions resulting from these inventories can be no better than the SNM accounting system and the quality of measurements performed for each receipt, removal and inventory. Inventories interrupt processing or production operations, increase personnel exposures, and can add significantly to the cost of any operation. Therefore, realistic goals for the inventory must be defined and the relationship of the inherent parameters used in its validation be determined. Purpose of this document is to provide a statement of goals and a plan of action to achieve them

Denmark's National Inventory Report 2014

DEFF Research Database (Denmark)

Nielsen, Ole-Kenneth; Plejdrup, Marlene Schmidt; Winther, Morten

This report is Denmark’s National Inventory Report 2014. The report contains information on Denmark’s emission inventories for all years’ from 1990 to 2012 for CO2, CH4, N2O, HFCs, PFCs and SF6, NOx, CO, NMVOC, SO2......This report is Denmark’s National Inventory Report 2014. The report contains information on Denmark’s emission inventories for all years’ from 1990 to 2012 for CO2, CH4, N2O, HFCs, PFCs and SF6, NOx, CO, NMVOC, SO2...

Denmark's National Inventory Report 2013

DEFF Research Database (Denmark)

Nielsen, Ole-Kenneth; Plejdrup, Marlene Schmidt; Winther, Morten

This report is Denmark’s National Inventory Report 2013. The report contains information on Denmark’s emission inventories for all years’ from 1990 to 2011 for CO2, CH4, N2O, HFCs, PFCs and SF6, NOx, CO, NMVOC, SO2.......This report is Denmark’s National Inventory Report 2013. The report contains information on Denmark’s emission inventories for all years’ from 1990 to 2011 for CO2, CH4, N2O, HFCs, PFCs and SF6, NOx, CO, NMVOC, SO2....

Denmark's National Inventory Report 2017

DEFF Research Database (Denmark)

Nielsen, Ole-Kenneth; Plejdrup, Marlene Schmidt; Winther, Morten

This report is Denmark’s National Inventory Report 2017. The report contains information on Denmark’s emission inventories for all years’ from 1990 to 2015 for CO2, CH4, N2O, HFCs, PFCs and SF6, NOx, CO, NMVOC, SO2......This report is Denmark’s National Inventory Report 2017. The report contains information on Denmark’s emission inventories for all years’ from 1990 to 2015 for CO2, CH4, N2O, HFCs, PFCs and SF6, NOx, CO, NMVOC, SO2...

Six ways to reduce inventory.

Science.gov (United States)

Lunn, T

1996-05-01

The purpose of this presentation is to help you reduce the inventory in your operation. We will accomplish that task by discussing six specific methods that companies have used successfully to reduce their inventory. One common attribute of these successes is that they also build teamwork among the people. Every business operation today is concerned with methods to improve customer service. The real trick is to accomplish that task without increasing inventory. We are all concerned with improving our skills at keeping inventory low.

ANALYSIS MODEL FOR INVENTORY MANAGEMENT

Directory of Open Access Journals (Sweden)

CAMELIA BURJA

2010-01-01

Full Text Available The inventory represents an essential component for the assets of the enterprise and the economic analysis gives them special importance because their accurate management determines the achievement of the activity object and the financial results. The efficient management of inventory requires ensuring an optimum level for them, which will guarantee the normal functioning of the activity with minimum inventory expenses and funds which are immobilised. The paper presents an analysis model for inventory management based on their rotation speed and the correlation with the sales volume illustrated in an adequate study. The highlighting of the influence factors on the efficient inventory management ensures the useful information needed to justify managerial decisions, which will lead to a balancedfinancial position and to increased company performance.

National Wetlands Inventory Polygons

Data.gov (United States)

Minnesota Department of Natural Resources — Wetland area features mapped as part of the National Wetlands Inventory (NWI). The National Wetlands Inventory is a national program sponsored by the US Fish and...

10 CFR 39.37 - Physical inventory.

Science.gov (United States)

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Physical inventory. 39.37 Section 39.37 Energy NUCLEAR... inventory. Each licensee shall conduct a semi-annual physical inventory to account for all licensed material received and possessed under the license. The licensee shall retain records of the inventory for 3 years...

Base-age invariance and inventory projections

Science.gov (United States)

C. J. Cieszewski; R. L. Bailey; B. E. Borders; G. H. Brister; B. D. Shiver

2000-01-01

One of the most important functions of forest inventory is to facilitate management decisions towards forest sustainability based on inventory projections into the future. Therefore, most forest inventories are used for predicting future states of the forests, in modern forestry the most common methods used in inventory projections are based on implicit functions...

SUBDOSA: a computer program for calculating external doses from accidental atmospheric releases of radionuclides

International Nuclear Information System (INIS)

Strenge, D.L.; Watson, E.C.; Houston, J.R.

1975-06-01

A computer program, SUBDOSA, was developed for calculating external γ and β doses to individuals from the accidental release of radionuclides to the atmosphere. Characteristics of SUBDOSA are: doses from both γ and β radiation are calculated as a function of depth in tissue, summed and reported as skin, eye, gonadal, and total body dose; doses are calculated for releases within each of several release time intervals and nuclide inventories and atmospheric dispersion conditions are considered for each time interval; radioactive decay is considered during the release and/or transit using a chain decay scheme with branching to account for transitions to and from isomeric states; the dose from gamma radiation is calculated using a numerical integration technique to account for the finite size of the plume; and the program computes and lists the normalized air concentrations at ground level as a function of distance from the point of release. (auth)

Historical releases of radioactivity to the environment from ORNL

International Nuclear Information System (INIS)

Ohnesorge, W.F.

1986-05-01

This report gives a brief history and assessment of ORNL radionuclide releases to the environment. A short history and an inventory of radioactivity disposed of by shallow land burial and hydrofracture techniques are given along with a brief discussion of the potential environmental impact of these disposed materials. The data available for this report varied greatly in quality. Data on contaminated liquid waste and liquids discharged to the environment are much more reliable than early data on contaminated air discharges and contaminated solid waste. Data for more recent years are more complete and reliable than data obtained from records dating back to the early history of the laboratory. The data presented here do not include materials retrievably stored (with the exception of uranium solid waste data) or inventories of materials stored in operating or surplus facilities since these materials presently have no contact with or loss to the environment

Annual Danish emissions inventory report to UNECE. Inventory 1990 - 2002

Energy Technology Data Exchange (ETDEWEB)

Illerup, J B; Nielsen, M; Winther, M; Hjort Mikkelsen, M; Lyck, E; Hoffmann, L; Fauser, P

2004-05-01

This report is a documentation report on the emission inventories for Denmark as reported to the UNECE Secretariat under the Convention on Long Range Transboundary Air Pollution due by 15 February 2004. The report contains information on Denmark's emission inventories regarding emissions of (1) SOx for the years 1980-2002, (2) NOx, CO, NMVOC and NH{sub 3} for the years 1985-2002; (3) Particulate matter: TSP, PM10, PM2.5 for the years 2000-2002, (4) Heavy Metals: Pb, Cd, Hg, As, Cr, Cu, Ni, Se and Zn for the years 1990-2002, and (5) Polyaromatic hydrocarbons (PAH): Benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene and indeno(1,2,3-cd)pyrene for the years 1990-2002. Furthermore, the report contains information on background data for emissions inventory. (au)

Annual Danish emissions inventory report to UNECE. Inventory 1990 - 2002

Energy Technology Data Exchange (ETDEWEB)

Illerup, J.B.; Nielsen, M.; Winther, M.; Hjort Mikkelsen, M.; Lyck, E.; Hoffmann, L.; Fauser, P.

2004-05-01

This report is a documentation report on the emission inventories for Denmark as reported to the UNECE Secretariat under the Convention on Long Range Transboundary Air Pollution due by 15 February 2004. The report contains information on Denmark's emission inventories regarding emissions of (1) SOx for the years 1980-2002, (2) NOx, CO, NMVOC and NH{sub 3} for the years 1985-2002; (3) Particulate matter: TSP, PM10, PM2.5 for the years 2000-2002, (4) Heavy Metals: Pb, Cd, Hg, As, Cr, Cu, Ni, Se and Zn for the years 1990-2002, and (5) Polyaromatic hydrocarbons (PAH): Benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene and indeno(1,2,3-cd)pyrene for the years 1990-2002. Furthermore, the report contains information on background data for emissions inventory. (au)

Recent evidence on the muted inventory cycle

OpenAIRE

Andrew J. Filardo

1995-01-01

Inventories play an important role in business cycles. Inventory build-ups add momentum to the economy during expansions, while inventory liquidations sap economic strength during recessions. In addition, because inventory fluctuations are notoriously difficult to predict, they present considerable uncertainty in assessing the economic outlook.> The role of inventories in shaping the current outlook for the U.S. economy is particularly uncertain. In the early 1990s, inventory swings appeared ...

Integrated inventory information system

Digital Repository Service at National Institute of Oceanography (India)

Sarupria, J.S.; Kunte, P.D.

The nature of oceanographic data and the management of inventory level information are described in Integrated Inventory Information System (IIIS). It is shown how a ROSCOPO (report on observations/samples collected during oceanographic programme...

30 CFR 220.032 - Inventories.

Science.gov (United States)

2010-07-01

... operations. The accumulation of surplus stocks shall be avoided by proper materiel control, inventory and... physical inventory that has not been credited to NPSL operations under § 220.015(a)(2) shall be credited to... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Inventories. 220.032 Section 220.032 Mineral...

Nanotechnology in the real world: Redeveloping the nanomaterial consumer products inventory

Directory of Open Access Journals (Sweden)

Marina E. Vance

2015-08-01

Full Text Available To document the marketing and distribution of nano-enabled products into the commercial marketplace, the Woodrow Wilson International Center for Scholars and the Project on Emerging Nanotechnologies created the Nanotechnology Consumer Products Inventory (CPI in 2005. The objective of this present work is to redevelop the CPI by leading a research effort to increase the usefulness and reliability of this inventory. We created eight new descriptors for consumer products, including information pertaining to the nanomaterials contained in each product. The project was motivated by the recognition that a diverse group of stakeholders from academia, industry, and state/federal government had become highly dependent on the inventory as an important resource and bellweather of the pervasiveness of nanotechnology in society. We interviewed 68 nanotechnology experts to assess key information needs. Their answers guided inventory modifications by providing a clear conceptual framework best suited for user expectations. The revised inventory was released in October 2013. It currently lists 1814 consumer products from 622 companies in 32 countries. The Health and Fitness category contains the most products (762, or 42% of the total. Silver is the most frequently used nanomaterial (435 products, or 24%; however, 49% of the products (889 included in the CPI do not provide the composition of the nanomaterial used in them. About 29% of the CPI (528 products contain nanomaterials suspended in a variety of liquid media and dermal contact is the most likely exposure scenario from their use. The majority (1288 products, or 71% of the products do not present enough supporting information to corroborate the claim that nanomaterials are used. The modified CPI has enabled crowdsourcing capabilities, which allow users to suggest edits to any entry and permits researchers to upload new findings ranging from human and environmental exposure data to complete life cycle

Updated Estimates of Glacier Mass Change for Western North America

Science.gov (United States)

Menounos, B.; Gardner, A. S.; Howat, I.; Berthier, E.; Dehecq, A.; Noh, M. J.; Pelto, B. M.

2017-12-01

Alpine glaciers are critical components in Western North America's hydrologic cycle. We use varied remotely-sensed datasets to provide updated mass change estimates for Region 2 of the Randolf Glacier Inventory (RGI-02 - all North American glaciers outside of Alaska). Our datasets include: i) aerial laser altimetry surveys completed over many thousands of square kilometers; and ii) multiple Terabytes of high resolution optical stereo imagery (World View 1-3 and Pleiades). Our data from the period 2014-2017 includes the majority of glaciers in RGI-02, specifically those ice masses in the Rocky Mountains (US and Canada), Interior Ranges in British Columbia and the Cascade Mountains (Washington). We co-registered and bias corrected the recent surface models to the Shuttle Radar Topographic Mapping (SRTM) data acquired in February, 2000. In British Columbia, our estimates of mass change are within the uncertainty estimates obtained for the period 1985-2000, but estimates from some regions indicate accelerated mass loss. Work is also underway to update glacier mass change estimates for glaciers in Washington and Montana. Finally, we use re-analysis data (ERA interim and ERA5) to evaluate the meteorological drivers that explain the temporal and spatial variability of mass change evident in our analysis.

Inventory development for perfluorooctane sulfonic acid (PFOS) in Turkey: challenges to control chemicals in articles and products.

Science.gov (United States)

Korucu, M Kemal; Gedik, Kadir; Weber, Roland; Karademir, Aykan; Kurt-Karakus, Perihan Binnur

2015-10-01

Perfluorooctane sulfonic acid (PFOS) and related substances have been listed as persistent organic pollutants (POPs) in the Stockholm Convention. Countries which have ratified the Convention need to take appropriate actions to control PFOS use and release. This study compiles and enhances the findings of the first inventory of PFOS and related substances use in Turkey conducted within the frame of the Stockholm Convention National Implementation Plan (NIP) update. The specific Harmonized Commodity Description and Coding System (Harmonized System (HS)) codes of imported and exported goods that possibly contain PFOS and 165 of Chemical Abstracts Service (CAS) numbers of PFOS-related substances were assessed for acquiring information from customs and other authorities. However, with the current approaches available, no useful information could be compiled since HS codes are not specific enough and CAS numbers are not used by customs. Furthermore, the cut-off volume in chemical databases in Turkey and the reporting limit in the HS system (0.1 %) are too high for controlling PFOS. The attempt of modeling imported volumes by a Monte Carlo simulation did not also result in a satisfactory estimate, giving an upper-bound estimate above the global production volumes. The replies to questionnaires were not satisfactory, highlighting that an elaborated approach is needed in the communication with potentially PFOS-using stakeholders. The experience of the challenges of gathering information on PFOS in articles and products revealed the gaps of controlling highly hazardous substances in products and articles and the need of improvements.

Science Inventory | US EPA

Science.gov (United States)

The Science Inventory is a searchable database of research products primarily from EPA's Office of Research and Development. Science Inventory records provide descriptions of the product, contact information, and links to available printed material or websites.

An inventory of potential PCDD and PCDF emission sources in the mainland of China

Energy Technology Data Exchange (ETDEWEB)

Jin, Jun; Xiaoyan, Tang [Peking Univ., Beijing (China); Peng, Hao [Central Univ. for Nationalities, Beijing (China)

2004-09-15

Polychlorinated dibenzo-p-dioxin (PCDD) and polychlorinated dibenzofurans (PCDF) are widespread environmental pollutants. A number of countries have developed national inventories of PCDD/F emission, such as USA, EU Nations and Japan. However, due to the lack of PCDD/F data measured in China and the uncertain nature of the documentation available on emission factors, the report on inventories of dioxin emission is absent. With the municipal population growth, economic development and living-standard improvement, China faces many severe environment issues including potential problems related to PCDD/F. The country is aware of potential dioxin sources such as: incineration, iron and steel industry, chemical industry, fires, coal power plant, foundries, PCB in capacitors and transformers, sintering, traffic emission. In 2001, China signed the Stockholm Convention on Persistent Organic Pollutants in Stockholm. Therefore, there is a need for information regarding dioxin emission from these sources for taking actions to reduce and/or eliminate the release of dioxins in China, and reduce human exposure. In this study, we identify those potential PCDD/F emission sources and work out the first inventory on PCDD/F emission into the environment in China.

Comparison and analysis of release scenarios for ground disposal of various nations

International Nuclear Information System (INIS)

Sakata, Sadahiro; Nakai, Kunihiro

1985-01-01

This report is aimed at comparing and analyzing the concept and evaluation methods of varuous foreign countries concerning their release scenarios for ground disposal of low- and high-level radioactive wastes in order to provide helpful information to be used in developing release scenarios for Japan. The groundwater release scenario and human intrusion scenario should particularly be well examined in considering shallow ground disposal of low-level wastes. Assessment of the leaching rate is important for a groundwater release scenario. Experimental data and verification tests are required to support the simplified model to be used for safety assessment. Evaluation of the radioactive nucleide inventory is also important for ground disposal of low-level wastes. An evaluation system should be established as soon as possible. For ground disposal of high-level radioactive wastes, on the other hand, it will become increasingly important to establish performance assessment models for practical evaluation of the rate of release from the engineered barrier and to collect test and verification data for suporting them. (Nogami, K.)

Glacial lake inventory and lake outburst potential in Uzbekistan.

Science.gov (United States)

Petrov, Maxim A; Sabitov, Timur Y; Tomashevskaya, Irina G; Glazirin, Gleb E; Chernomorets, Sergey S; Savernyuk, Elena A; Tutubalina, Olga V; Petrakov, Dmitriy A; Sokolov, Leonid S; Dokukin, Mikhail D; Mountrakis, Giorgos; Ruiz-Villanueva, Virginia; Stoffel, Markus

2017-08-15

Climate change has been shown to increase the number of mountain lakes across various mountain ranges in the World. In Central Asia, and in particular on the territory of Uzbekistan, a detailed assessment of glacier lakes and their evolution over time is, however lacking. For this reason we created the first detailed inventory of mountain lakes of Uzbekistan based on recent (2002-2014) satellite observations using WorldView-2, SPOT5, and IKONOS imagery with a spatial resolution from 2 to 10m. This record was complemented with data from field studies of the last 50years. The previous data were mostly in the form of inventories of lakes, available in Soviet archives, and primarily included localized in-situ data. The inventory of mountain lakes presented here, by contrast, includes an overview of all lakes of the territory of Uzbekistan. Lakes were considered if they were located at altitudes above 1500m and if lakes had an area exceeding 100m 2 . As in other mountain regions of the World, the ongoing increase of air temperatures has led to an increase in lake number and area. Moreover, the frequency and overall number of lake outburst events have been on the rise as well. Therefore, we also present the first outburst assessment with an updated version of well-known approaches considering local climate features and event histories. As a result, out of the 242 lakes identified on the territory of Uzbekistan, 15% are considered prone to outburst, 10% of these lakes have been assigned low outburst potential and the remainder of the lakes have an average level of outburst potential. We conclude that the distribution of lakes by elevation shows a significant influence on lake area and hazard potential. No significant differences, by contrast, exist between the distribution of lake area, outburst potential, and lake location with respect to glaciers by regions. Copyright © 2017 Elsevier B.V. All rights reserved.

42 CFR 35.41 - Inventory.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Inventory. 35.41 Section 35.41 Public Health PUBLIC... STATION MANAGEMENT Disposal of Money and Effects of Deceased Patients § 35.41 Inventory. Promptly after the death of a patient in a station or hospital of the Service, an inventory of his money and effects...

Petroleum and hazardous material releases from industrial facilities associated with Hurricane Katrina.

Science.gov (United States)

Santella, Nicholas; Steinberg, Laura J; Sengul, Hatice

2010-04-01

Hurricane Katrina struck an area dense with industry, causing numerous releases of petroleum and hazardous materials. This study integrates information from a number of sources to describe the frequency, causes, and effects of these releases in order to inform analysis of risk from future hurricanes. Over 200 onshore releases of hazardous chemicals, petroleum, or natural gas were reported. Storm surge was responsible for the majority of petroleum releases and failure of storage tanks was the most common mechanism of release. Of the smaller number of hazardous chemical releases reported, many were associated with flaring from plant startup, shutdown, or process upset. In areas impacted by storm surge, 10% of the facilities within the Risk Management Plan (RMP) and Toxic Release Inventory (TRI) databases and 28% of SIC 1311 facilities experienced accidental releases. In areas subject only to hurricane strength winds, a lower fraction (1% of RMP and TRI and 10% of SIC 1311 facilities) experienced a release while 1% of all facility types reported a release in areas that experienced tropical storm strength winds. Of industrial facilities surveyed, more experienced indirect disruptions such as displacement of workers, loss of electricity and communication systems, and difficulty acquiring supplies and contractors for operations or reconstruction (55%), than experienced releases. To reduce the risk of hazardous material releases and speed the return to normal operations under these difficult conditions, greater attention should be devoted to risk-based facility design and improved prevention and response planning.

An inventory of Canadian pregnancy and birth cohort studies: research in progress

Directory of Open Access Journals (Sweden)

Joly Marie-Pier

2012-10-01

Full Text Available Abstract Background A web-based inventory was developed as a voluntary registry of Canadian pregnancy and birth cohort studies, with the objective to foster collaboration and sharing of research tools among cohort study groups as a means to enrich research in maternal and child health across Canada. Description Information on existing birth cohort studies conducted in Canada exclusively or as part of broader international initiatives was accessed by searching the literature in PubMed and PsychInfo databases. Additional studies were identified by enquiring about the research activities of researchers at Canadian universities or working in affiliated hospitals or research centres or institutes. Of the fifty-eight birth cohort studies initially identified, forty-six were incorporated into the inventory if they were of a retrospective and/or prospective longitudinal design and with a minimum of two phases of data collection, with the first period having occurred before, during, or shortly after pregnancy and had an initial study sample size of a minimum of 200 participants. Information collected from each study was organized into four main categories: basic information, data source and period of collection, exposures, and outcome measures and was coded and entered into an Excel spreadsheet. The information incorporated into the Excel spreadsheet was double checked, completed when necessary, and verified for completeness and accuracy by contacting the principal investigator or research coordinator. All data collected were then uploaded onto the website of the Institute of Human Development Child and Youth Health of the Canadian Institutes of Health Research. Subsequently, the database was updated and developed as an online searchable inventory on the website of the Maternal, Infant, Child and Youth Research Network. Conclusions This inventory is unique, as it represents detailed information assembled for the first time on a large number of Canadian

Plutonium Equivalent Inventory for Belowground Radioactive Waste at the Los Alamos National Laboratory Technical Area 54, Area G Disposal Facility - Fiscal Year 2011

International Nuclear Information System (INIS)

French, Sean B.; Shuman, Robert

2012-01-01

The Los Alamos National Laboratory (LANL) generates radioactive waste as a result of various activities. Many aspects of the management of this waste are conducted at Technical Area 54 (TA-54); Area G plays a key role in these management activities as the Laboratory's only disposal facility for low-level radioactive waste (LLW). Furthermore, Area G serves as a staging area for transuranic (TRU) waste that will be shipped to the Waste Isolation Pilot Plant for disposal. A portion of this TRU waste is retrievably stored in pits, trenches, and shafts. The radioactive waste disposed of or stored at Area G poses potential short- and long-term risks to workers at the disposal facility and to members of the public. These risks are directly proportional to the radionuclide inventories in the waste. The Area G performance assessment and composite analysis (LANL, 2008a) project long-term risks to members of the public; short-term risks to workers and members of the public, such as those posed by accidents, are addressed by the Area G Documented Safety Analysis (LANL, 2011a). The Documented Safety Analysis uses an inventory expressed in terms of plutonium-equivalent curies, referred to as the PE-Ci inventory, to estimate these risks. The Technical Safety Requirements for Technical Area 54, Area G (LANL, 2011b) establishes a belowground radioactive material limit that ensures the cumulative projected inventory authorized for the Area G site is not exceeded. The total belowground radioactive waste inventory limit established for Area G is 110,000 PE-Ci. The PE-Ci inventory is updated annually; this report presents the inventory prepared for 2011. The approach used to estimate the inventory is described in Section 2. The results of the analysis are presented in Section 3.

New mechanism for enhancing ash removal efficiency and reducing tritium inventory

International Nuclear Information System (INIS)

Li Chengyue; Deng Baiquan; Yan Jiancheng

2007-01-01

A new mechanism is suggested to suppress ash particle back streams in the divertor region of our fusion experimental breeder (FEB) reactor for enhancing the ash removal efficiency and reducing the tritium inventory by applications of the nonlinear effect of high power rf ponderomotive force potential which reflects the plate-released and re-ionized He + back to the plate. Meanwhile, the potential does not hinder α particles, which are coming from scraping of the layer, flowing to the target plate. However, it does stop tritium ions flowing to the target. Based on the FEB design parameters, our calculations have shown that the ash removal efficiency can be improved by as much as 40% if the parallel component of rf field 150-200 V/cm is applied to the location at a perpendicular distance L=20 cm apart from the plate and the plate-recycling neutral helium atom energy is about 0.75 eV, at the same time, the tritium inventory can be reduced to some extent. (authors)

Blood inventory management: hospital best practice.

Science.gov (United States)

Stanger, Sebastian H W; Yates, Nicola; Wilding, Richard; Cotton, Sue

2012-04-01

Blood is a perishable product, and hence good management of inventories is crucial. Blood inventory management is a trade-off between shortage and wastage. The challenge is to keep enough stock to ensure a 100% supply of blood while keeping time expiry losses at a minimum. This article focuses on inventory management of red blood cells in hospital transfusion laboratories to derive principles of best practice and makes recommendations that will ensure losses due to time expiry are kept to a minimum. The literature was reviewed to identify available models for perishable inventory management. Historical data from the UK blood supply chain was analyzed to identify hospitals with good inventory management practice and low wastage levels. Transfusion laboratory managers in the selected hospitals were interviewed in 7 case studies with the aim of identifying drivers for low wastage and good inventory management practice. The findings from the case studies were compared with the literature. The extant literature asserts that the drivers for good inventory performance are the use of complex inventory models and algorithms. This study has found this not to be the case. Instead, good performance is driven by the quality of transfusion laboratory staff, who must be skilled, regularly trained, and experienced. Electronic crossmatching, transparency of the inventory, and simple management procedures also facilitate good performance. Copyright © 2012 Elsevier Inc. All rights reserved.

Thermal effect of periodical bakeout on tritium inventory in first wall and permeation to coolant in reactor life

International Nuclear Information System (INIS)

Nakahara, Katsuhiko

1989-01-01

In view of safety, it is very important to control the tritium inventory in first walls and permeation to the coolant. A time-dependent diffusion and temperature calculation code, TPERM, was developed. Using this code, a numerical study on the long term effects of the bakeout temperature on tritium inventory and tritium permeation to the coolant was made. In this study, an FER type first wall (stainless steel) was considered and a cyclic operation (one cycle includes a plasma burn phase and a bakeout phase) was assumed. The results are as follows: (i) There is almost no difference in the tritium inventory in the first wall between the operation with 150 0 C-bakeout and the continuous burning operation (without bakeout). In both cases there is not tritium permeation to the coolant at 5 years' integrated burn time. The 150 0 C-bakeout is effective to release tritium in the surface (to 0.1 mm depth) region on the plasma side, but it is not effective to decrease the tritium inventory over the reactor life. (ii) To decrease the tritium inventory, a bakeout at a temperature higher than 150 0 C is necessary. But a high temperature bakeout causes earlier tritium permeation to the coolant. (iii) From these results it is suggested that the decrease the tritium inventory over the reactor life by bakeout, some form of protection against tritium permeation or a decontamination device in the cooling (or bakeout) system becomes necessary. (orig.)

A contemporary national nitrogen inventory as a benchmark for future progress in mitigating nitrogen pollution in the USA

Science.gov (United States)

Boyer, E. W.; Galloway, J. N.; Theis, T.; Alexander, R. B.

2011-12-01

We present a contemporary inventory of reactive nitrogen (Nr) inputs to land, air, and water in the United States. Inputs of Nr to the nation and the world have been increasing, largely due to human activities associated with food production and energy consumption via the combustion of fossil fuels and biofuels. Despite the obvious essential benefits of a plentiful supply of food and energy, the adverse consequences associated with the accumulation of Nr in the environment are large. Most of the Nr created by anthropogenic activities is released to the environment, often with unintended negative consequences. The greater the inputs of Nr to the landscape, the greater the potential for negative effects, caused by greenhouse gas production, ground level ozone, acid deposition, and Nr overload that can contribute to climate change, degradation of soils and vegetation, acidification of surface waters, coastal eutrophication, hypoxia and habitat loss. Here, we present a consistent accounting method for quantifying Nr sources and transport that was used in our inventory, and discuss associated data needs for tallying Nr inputs at regional scales. The inventory is a necessary tool for exploring the role of Nr contributed to the environment from various sources (e.g., from fertilizers, manure, biological fixation, human waste, atmospheric deposition) and from various industrial sectors (e.g., from agriculture, transportation, electricity generation). Agriculture and use of fertilizers to produce food, feed, and fiber (including bioenergy and biological nitrogen fixation) and combustion of fossil fuels are the largest sources of Nr released into the environment in the USA. Our inventory is currently being used by the U.S. Environmental Protection Agency as a benchmark of the current Nr situation against which future progress can be assessed -- amidst changing Nr inputs and implementation of policy and management strategies to mitigate Nr pollution.

Upper-bound fission product release assessment for large break LOCA in CANFLEX bundle reactor core

International Nuclear Information System (INIS)

Oh, Duk Ju; Lee, Kang Moon

1996-07-01

Quarter-core gap inventory assessment for CANDU-6 reactor core loaded with CANFLEX fuel bundles has been performed as one of the licensing safety analyses required for 24 natural uranium CANFLEX bundle irradiation in CANDU-6 reactor. The quarter-core gap inventory for the CANFLEX bundle core is 5 - 10 times lower than that for the standard bundle core, depending on the half-life of the isotope. The lower gap inventory of the CANFLEX bundle core is attributed to the lower linear power of the CANFLEX bundle compared with the standard bundle. However, the whole core total inventories for both the CANFLEX and standard bundle cores are nearly the same. The 6 - 8 times lower upper-bound fission product releases of the CANFLEX bundle core for large break LOCA than those of the standard bundle core imply that the loading of 24 natural uranium CANFLEX bundles would improve the predicted consequences of the postulated accident described in the Wolsung 2 safety report. 2 tabs., 6 figs., 3 refs. (Author)

The Norwegian Emission Inventory 2012. Documentation of methodologies for estimating emissions of greenhouse gases and long-range transboundary air pollutants

Energy Technology Data Exchange (ETDEWEB)

Sandmo, Trond (ed.)

2012-07-01

The Norwegian emission inventory is a joint undertaking between the Climate and Pollution Agency1 and Statistics Norway. Statistics Norway is responsible for the collection and development of activity data, and emission figures are derived from models operated by Statistics Norway. The Climate and Pollution Agency is responsible for the emission factors, for providing data from specific industries and sources and for considering the quality, and assuring necessary updating, of emission models like, e.g., the road traffic model and calculation of methane emissions from landfills. Emission data are used for a range of national applications and for international reporting. The Climate and Pollution Agency is responsible for the Norwegian reporting to United Nations Framework Convention on Climate Change (UNFCCC) and to United Nations Economic Commission Europe (UN-ECE). This report documents the methodologies used in the Norwegian emission inventory of greenhouse gases (GHG), acidifying pollutants, heavy metals (HM) and persistent organic pollutants (POPs). The documentation will also serve as a part of the National Inventory Report submitted by Norway to the United Nations Framework Convention on Climate Change (UNFCCC), and as documentation of the reported emissions to UNECE for the pollutants restricted by CLRTAP (Convention on Long-Range Transboundary Air Pollution). LULUCF (land use, land-use change and forestry) is not considered in this report, see the National Inventory Report (Climate and Pollution Agency 2012) for documentation on this topic.This report replaces the previous documentation of the emission model (Sandmo 2011), and is the latest annually updated version of a report edited by Britta Hoem in 2005. The most important changes since last year's documentation are: Minor NOx emissions from production of rock wool, which previously not have been estimated, have been included, Some factors for estimation of N2O from agriculture have been altered

The Norwegian Emission Inventory 2012. Documentation of methodologies for estimating emissions of greenhouse gases and long-range transboundary air pollutants

Energy Technology Data Exchange (ETDEWEB)

Sandmo, Trond [ed.

2012-07-01

The Norwegian emission inventory is a joint undertaking between the Climate and Pollution Agency1 and Statistics Norway. Statistics Norway is responsible for the collection and development of activity data, and emission figures are derived from models operated by Statistics Norway. The Climate and Pollution Agency is responsible for the emission factors, for providing data from specific industries and sources and for considering the quality, and assuring necessary updating, of emission models like, e.g., the road traffic model and calculation of methane emissions from landfills. Emission data are used for a range of national applications and for international reporting. The Climate and Pollution Agency is responsible for the Norwegian reporting to United Nations Framework Convention on Climate Change (UNFCCC) and to United Nations Economic Commission Europe (UN-ECE). This report documents the methodologies used in the Norwegian emission inventory of greenhouse gases (GHG), acidifying pollutants, heavy metals (HM) and persistent organic pollutants (POPs). The documentation will also serve as a part of the National Inventory Report submitted by Norway to the United Nations Framework Convention on Climate Change (UNFCCC), and as documentation of the reported emissions to UNECE for the pollutants restricted by CLRTAP (Convention on Long-Range Transboundary Air Pollution). LULUCF (land use, land-use change and forestry) is not considered in this report, see the National Inventory Report (Climate and Pollution Agency 2012) for documentation on this topic.This report replaces the previous documentation of the emission model (Sandmo 2011), and is the latest annually updated version of a report edited by Britta Hoem in 2005. The most important changes since last year's documentation are: Minor NOx emissions from production of rock wool, which previously not have been estimated, have been included, Some factors for estimation of N2O from agriculture have been altered, The

Optimization of inventory management in furniture manufacturing

OpenAIRE

Karkauskas, Justinas

2017-01-01

Aim of research - to present inventory management optimization guidelines for furniture manufacturing company, based on analysis of scientific literature and empirical research. Tasks of the Issue: • Disclose problems of inventory management in furniture manufacturing sector; • To analyze theoretical inventory management decisions; • To develop theoretical inventory management optimization model; • Do empirical research of inventory management and present offers for optimizatio...

Comparison of global inventories of CO_2 emissions from biomass burning during 2002–2011 derived from multiple satellite products

International Nuclear Information System (INIS)

Shi, Yusheng; Matsunaga, Tsuneo; Saito, Makoto; Yamaguchi, Yasushi; Chen, Xuehong

2015-01-01

This study compared five widely used globally gridded biomass burning emissions inventories for the 2002–2011 period (Global Fire Emissions Database 3 (GFED3), Global Fire Emissions Database 4 (GFED4), Global Fire Assimilation System 1.0 (GFAS1.0), Fire INventory from NCAR 1.0 (FINN1.0) and Global Inventory for Chemistry-Climate studies-GFED4 (G-G)). Average annual CO_2 emissions range from 6521.3 to 9661.5 Tg year"−"1 for five inventories, with extensive amounts in Africa, South America and Southeast Asia. Coefficient of Variation for Southern America, Northern and Southern Africa are 30%, 39% and 48%. Globally, the majority of CO_2 emissions are released from savanna burnings, followed by forest and cropland burnings. The largest differences among the five inventories are mainly attributable to the overestimation of CO_2 emissions by FINN1.0 in Southeast Asia savanna and cropland burning, and underestimation in Southern Africa savanna and Amazon forest burning. The overestimation in Africa by G-G also contributes to the differences. - Highlights: • Five widely used global biomass burning emissions inventories were compared. • Global CO_2 emissions compared well while regional differences are large. • The largest differences were found in Southeast Asia and Southern Africa. • Savanna burning emission was the largest contributor to the global emissions. • Variations in savanna burning emission led to the differences among inventories. - Differences of the five biomass burning CO_2 emissions inventories were found in Southeast Asia and Southern Africa due to the variations in savanna burning emissions estimation.

Radiation safety and inventory of sealed radiation sources in Pakistan

International Nuclear Information System (INIS)

Ali, M.; Mannan, A.

2001-01-01

Sealed radiation sources (SRS) of various types and activities are widely used in industry, medicine, agriculture, research and teaching in Pakistan. The proper maintenance of records of SRS is mandatory for users/licensees. Since 1956, more than 2000 radiation sources of different isotopes having activities of Bq to TBq have been imported. Of these, several hundred sources have been disposed of and some have been exported/returned to the suppliers. To ensure the safety and security of the sources and to control and regulate the safe use of radiation sources in various disciplines, the Directorate of Nuclear Safety and Radiation Protection (DNSRP), the implementing arm of the regulatory authority in the country, has introduced a system for notifying, registering and licensing the use of all types of SRS. In order to update the inventory of SRS used throughout the country, the DNSRP has developed a database. (author)

The stress response to surgery: release mechanisms and the modifying effect of pain relief

DEFF Research Database (Denmark)

Kehlet, H

1989-01-01

This short review updates information on the release mechanisms of the systemic response to surgical injury and the modifying effect of pain relief. Initiation of the response is primarily due to afferent nerve impulses combined with release of humoral substances (such as prostaglandins, kinins...... in releasing the classical endocrine catabolic response, while humoral factors are important for the hyperthermic response, changes in coagulation and fibrinolysis immunofunction, and capillary permeability. The modifying effect of pain relief on the surgical stress response is dependent upon the technique...... on the stress response. In summary, pain alleviation itself may not necessarily lead to an important modification of the stress response, and a combined approach with inhibition of the neural and humoral release mechanisms is necessary for a pronounced inhibition or prevention of the response to surgical injury....

2017 Updates: Earth Gravitational Model 2020

Science.gov (United States)

Barnes, D. E.; Holmes, S. A.; Ingalls, S.; Beale, J.; Presicci, M. R.; Minter, C.

2017-12-01

The National Geospatial-Intelligence Agency [NGA], in conjunction with its U.S. and international partners, has begun preliminary work on its next Earth Gravitational Model, to replace EGM2008. The new `Earth Gravitational Model 2020' [EGM2020] has an expected public release date of 2020, and will retain the same harmonic basis and resolution as EGM2008. As such, EGM2020 will be essentially an ellipsoidal harmonic model up to degree (n) and order (m) 2159, but will be released as a spherical harmonic model to degree 2190 and order 2159. EGM2020 will benefit from new data sources and procedures. Updated satellite gravity information from the GOCE and GRACE mission, will better support the lower harmonics, globally. Multiple new acquisitions (terrestrial, airborne and shipborne) of gravimetric data over specific geographical areas (Antarctica, Greenland …), will provide improved global coverage and resolution over the land, as well as for coastal and some ocean areas. Ongoing accumulation of satellite altimetry data as well as improvements in the treatment of this data, will better define the marine gravity field, most notably in polar and near-coastal regions. NGA and partners are evaluating different approaches for optimally combining the new GOCE/GRACE satellite gravity models with the terrestrial data. These include the latest methods employing a full covariance adjustment. NGA is also working to assess systematically the quality of its entire gravimetry database, towards correcting biases and other egregious errors. Public release number 15-564

Gas retention and release behavior in Hanford double-shell waste tanks

Energy Technology Data Exchange (ETDEWEB)

Meyer, P.A.; Brewster, M.E.; Bryan, S.A. [and others

1997-05-01

This report describes the current understanding of flammable gas retention and release in Hanford double-shell waste tanks AN-103, AN-104, AN-105, AW-101, SY-101, and SY-103. This knowledge is based on analyses, experimental results, and observations of tank behavior. The applicable data available from the void fraction instrument, retained gas sampler, ball rheometer, tank characterization, and field monitoring are summarized. Retained gas volumes and void fractions are updated with these new data. Using the retained gas compositions from the retained gas sampler, peak dome pressures during a gas burn are calculated as a function of the fraction of retained gas hypothetically released instantaneously into the tank head space. Models and criteria are given for gas generation, initiation of buoyant displacement, and resulting gas release; and predictions are compared with observed tank behavior.

Gas retention and release behavior in Hanford double-shell waste tanks

International Nuclear Information System (INIS)

Meyer, P.A.; Brewster, M.E.; Bryan, S.A.

1997-05-01

This report describes the current understanding of flammable gas retention and release in Hanford double-shell waste tanks AN-103, AN-104, AN-105, AW-101, SY-101, and SY-103. This knowledge is based on analyses, experimental results, and observations of tank behavior. The applicable data available from the void fraction instrument, retained gas sampler, ball rheometer, tank characterization, and field monitoring are summarized. Retained gas volumes and void fractions are updated with these new data. Using the retained gas compositions from the retained gas sampler, peak dome pressures during a gas burn are calculated as a function of the fraction of retained gas hypothetically released instantaneously into the tank head space. Models and criteria are given for gas generation, initiation of buoyant displacement, and resulting gas release; and predictions are compared with observed tank behavior

Hanford inventory program user's manual

International Nuclear Information System (INIS)

Hinkelman, K.C.

1994-01-01

Provides users with instructions and information about accessing and operating the Hanford Inventory Program (HIP) system. The Hanford Inventory Program is an integrated control system that provides a single source for the management and control of equipment, parts, and material warehoused by Westinghouse Hanford Company in various site-wide locations. The inventory is comprised of spare parts and equipment, shop stock, special tools, essential materials, and convenience storage items. The HIP replaced the following systems; ACA, ASP, PICS, FSP, WSR, STP, and RBO. In addition, HIP manages the catalog maintenance function for the General Supplies inventory stocked in the 1164 building and managed by WIMS

Socioeconomic profile of Clark County, Nevada: Community services inventory

International Nuclear Information System (INIS)

1986-09-01

The Nevada Nuclear Waste Storage Investigations Project is preparing socioeconomic profiles of Clark County, Nevada, and communities in Clark County that could be affected by siting, construction, operation, and decommissioning of a high-level nuclear waste repository at Yucca Mountain, located in Nye County. These profiles serve as a data base for evaluating local community service impacts; store existing socioeconomic data in a uniform, readily accessible format; identify the need for additional data; and assist in developing a plan for monitoring and mitigating any significant adverse impacts that may be associated with site characterization and potential repository development. This element of the socioeconomic profiles contains an inventory of community services provided by local, county, and state agencies and volunteer organizations to residents of Las Vegas, North Las Vegas, Henderson, Boulder City, Indian Springs, and unincorporated areas of the county. Services inventoried include housing, growth management, general government, education, police protection, transportation networks, public clinics, private health personnel, parks and recreation, social services, libraries, ambulances, electric power, natural gas, water, sewers and wastewater treatment, solid waste, and fire protection. The report includes a summary overview of service providers in Clark County, discussions of the services provided to residents of communities in Clark County that may be affected by Project activities, and a description of service providers whose service areas are not limited to the incorporated areas of Clark County. Data presented in this profile were collected through March of 1985. Data collection efforts are ongoing and this profile will be updated periodically

Optimal ABC inventory classification using interval programming

NARCIS (Netherlands)

Rezaei, J.; Salimi, N.

2015-01-01

Inventory classification is one of the most important activities in inventory management, whereby inventories are classified into three or more classes. Several inventory classifications have been proposed in the literature, almost all of which have two main shortcomings in common. That is, the

An Analysis of the Optimal Multiobjective Inventory Clustering Decision with Small Quantity and Great Variety Inventory by Applying a DPSO

Science.gov (United States)

Li, Meng-Hua

2014-01-01

When an enterprise has thousands of varieties in its inventory, the use of a single management method could not be a feasible approach. A better way to manage this problem would be to categorise inventory items into several clusters according to inventory decisions and to use different management methods for managing different clusters. The present study applies DPSO (dynamic particle swarm optimisation) to a problem of clustering of inventory items. Without the requirement of prior inventory knowledge, inventory items are automatically clustered into near optimal clustering number. The obtained clustering results should satisfy the inventory objective equation, which consists of different objectives such as total cost, backorder rate, demand relevance, and inventory turnover rate. This study integrates the above four objectives into a multiobjective equation, and inputs the actual inventory items of the enterprise into DPSO. In comparison with other clustering methods, the proposed method can consider different objectives and obtain an overall better solution to obtain better convergence results and inventory decisions. PMID:25197713

A substantial psychometric analysis of the scales of the Minnesota Multiphasic Personality Inventory: F. B. Berezin’s version, the MMIL

Directory of Open Access Journals (Sweden)

Dzherelievskaya, Maria A.

2014-03-01

Full Text Available In our research we made a substantial psychometric analysis of the scales of F. B. Berezin’s version of the Minnesota Multiphasic Personality Inventory (MMPI, the MMIL, which is widely used in various spheres of psychological practice. Since the mid-1990s in Russia there have been many essential transformations in thinking and values that have been caused by changes in social and economic reality. For this reason, we need to continue our work on specifying the meaning of the MMIL tasks and, then, on updating the test norms and keys. Such psychometric updating is necessary for maintaining the efficiency of the method. For our update, we constructed linear norms for the test; we tested the questionnaire for the normality of the distribution of points; and we checked the validity (including external validity, the reliability coherence of the scales, and the variability of the points. The necessity of readapting the MMIL was thus demonstrated. Questions that display low variability and that are not significantly correlated with the scale they belong to, which reduces their differentiating potential, may be excluded from the test or reformulated.

Hospitals, Part of Community Facilities data set for all eleven counties and twenty-two cities within Middle Georgia. Updated by MGRC and maintained by the GA Dept of Community Affairs., Published in 2000, 1:24000 (1in=2000ft) scale, Middle Georgia Regional Commission.

Data.gov (United States)

NSGIC Regional | GIS Inventory — Hospitals dataset current as of 2000. Part of Community Facilities data set for all eleven counties and twenty-two cities within Middle Georgia. Updated by MGRC and...

Fuel mix electricity 2020, inventory, problems and solutions

International Nuclear Information System (INIS)

Seebregts, A.J.; Snoep, H.J.M.; Van Deurzen, J.; Lensink, S.M.; Van der Welle, A.J.; Wetzels, W.

2010-04-01

ECN made an inventory of the fuel mix of the electricity generation in the Netherlands for the year 2020. The inventory is derived from the updated Reference Projections that are based on the Global Economy scenario. This scenario has a relatively high growth of the domestic electricity demand (156 TWh in 2020 compared to about 118 TWh in 2008). Besides the factual inventory, ECN made a quickscan of potential problems associated with high penetration of electricity from wind energy, up to 12,000 MW in 2020. The conclusion is that the so-called 'offpeak hours issue' (in Dutch: 'het daluren issue') is a real potential problem under such scenario assumptions. In case of full wind availability, the total generating capacity consisting of must-run capacity and typical base load power plants with low variable cost of production (nuclear and coal) may exceed the electricity demand (domestic plus net export) in part of these off-peak situations, e.g. during nighttime. The must-run capacity consists, among others, of part of the decentralised CHP installations and waste incinerators. Potential solutions to this 'off-peak hours issue' are: (1) Flexibility in electricity demand ('demand response'); (2) Additional interconnection with neighbouring countries and appropriate market design rules; (3) Storage of electricity; (4) Flexibility of conventional (fossil) supply; (5) Flexibility of the intermittent renewable generation itself; (6) Intelligent grids ('Smart Grids'). Additional detailed analyses and research are needed to address the magnitude of the problem and to analyse the contribution of the various solutions. Such an analysis can provide an indication of an optimal and feasible combination of the solutions identified. Relevant issues are: (a) How often, with which magnitude and under which circumstances will the problem occur?; (b) What will be the effect on the curtailing of wind energy, and is curtailing plausible given current market rules and renewable energy

The Norwegian Emission Inventory 2010. Documentation of methodologies for estimating emissions of greenhouse gases and long-range transboundary air pollutants

Energy Technology Data Exchange (ETDEWEB)

Sandmo, Trond (ed.)

2010-06-15

The Norwegian emission inventory is a joint undertaking between the Climate and Pollution Agency (Klif) and Statistics Norway. Statistics Norway is responsible for the collection and development of activity data, and emission figures are derived from models operated by Statistics Norway. The Climate and Pollution Agency is responsible for the emission factors, for providing data from specific industries and sources and for considering the quality, and assuring necessary updating, of emissions models like e.g. the road traffic model and calculation of methane emissions from landfills. Emission data are used for a range of national applications and for international reporting. The Climate and Pollution Agency is responsible for the Norwegian reporting to United Nations Framework Convention on Climate Change (UNFCCC) and to United Nations Economic Commission Europe (UN-ECE). This report documents the methodologies used in the Norwegian emission inventory of greenhouse gases (GHG), acidifying pollutants, heavy metals (HM) and persistent organic pollutants (POPs). The documentation will also serve as a part of the National Inventory Report submitted by Norway to the United Nations Framework Convention on Climate Change (UNFCCC), and as documentation of the reported emissions to UNECE for the pollutants restricted by CLRTAP (Convention on Long-Range Transboundary Air Pollution). LULUCF is not considered in this report, see the National Inventory Report (Climate and Pollution Agency 2010) for documentation on this topic. This report replaces the previous documentation of the emission model, (Sandmo 2009), and is the latest annually updated version of a report edited by Britta Hoem in 2005. The most important changes since last year's documentation are: Emissions of CH{sub 4} and N{sub 2}O from well testing of crude oil off shore have been included - these have previously not been estimated Emissions of CH{sub 4} from enteric fermentation have increased for the whole

INCAP - Applying short-term flexibility to control inventories

OpenAIRE

Lödding , Hermann; Lohmann , Steffen

2011-01-01

Abstract Inventory Based Capacity Control (INCAP) is a very simple method that allows inventory levels to be effectively controlled by using short-term capacity flexibility in make-to-stock settings. Moreover, INCAP can be used for finished goods inventories as well as for semi-finished goods inventories. The basic idea is to define upper and lower inventory limits and to adjust capacities if the inventory level reaches either limit. Should the inventory fall below the lower limit,...

Strategic Inventories in Vertical Contracts

OpenAIRE

Krishnan Anand; Ravi Anupindi; Yehuda Bassok

2008-01-01

Classical reasons for carrying inventory include fixed (nonlinear) production or procurement costs, lead times, nonstationary or uncertain supply/demand, and capacity constraints. The last decade has seen active research in supply chain coordination focusing on the role of incentive contracts to achieve first-best levels of inventory. An extensive literature in industrial organization that studies incentives for vertical controls largely ignores the effect of inventories. Does the ability to ...

Inventories and sales uncertainty\\ud

OpenAIRE

Caglayan, M.; Maioli, S.; Mateut, S.

2011-01-01

We investigate the empirical linkages between sales uncertainty and firms´ inventory investment behavior while controlling for firms´ financial strength. Using large panels of manufacturing firms from several European countries we find that higher sales uncertainty leads to larger stocks of inventories. We also identify an indirect effect of sales uncertainty on inventory accumulation through the financial strength of firms. Our results provide evidence that financial strength mitigates the a...

77 FR 5280 - Service Contracts Inventory

Science.gov (United States)

2012-02-02

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0023] Service Contracts Inventory AGENCY: Nuclear...) is providing for public information its Inventory of Contracts for Services for Fiscal Year (FY) 2011. The inventory includes service contract actions over $25,000 that were awarded in FY 2011. ADDRESSES...

78 FR 10642 - Service Contracts Inventory

Science.gov (United States)

2013-02-14

... NUCLEAR REGULATORY COMMISSION [NRC-2013-0029] Service Contracts Inventory AGENCY: Nuclear...) is providing for public information its Inventory of Contracts for Services for Fiscal Year (FY) 2012. The inventory includes service contract actions over $25,000 that were awarded in FY 2012. ADDRESSES...

Improving emissions inventories in North America through systematic analysis of model performance during ICARTT and MILAGRO

Science.gov (United States)

Mena, Marcelo Andres

During 2004 and 2006 the University of Iowa provided air quality forecast support for flight planning of the ICARTT and MILAGRO field campaigns. A method for improvement of model performance in comparison to observations is showed. The method allows identifying sources of model error from boundary conditions and emissions inventories. Simultaneous analysis of horizontal interpolation of model error and error covariance showed that error in ozone modeling is highly correlated to the error of its precursors, and that there is geographical correlation also. During ICARTT ozone modeling error was improved by updating from the National Emissions Inventory from 1999 and 2001, and furthermore by updating large point source emissions from continuous monitoring data. Further improvements were achieved by reducing area emissions of NOx y 60% for states in the Southeast United States. Ozone error was highly correlated to NOy error during this campaign. Also ozone production in the United States was most sensitive to NOx emissions. During MILAGRO model performance in terms of correlation coefficients was higher, but model error in ozone modeling was high due overestimation of NOx and VOC emissions in Mexico City during forecasting. Large model improvements were shown by decreasing NOx emissions in Mexico City by 50% and VOC by 60%. Recurring ozone error is spatially correlated to CO and NOy error. Sensitivity studies show that Mexico City aerosol can reduce regional photolysis rates by 40% and ozone formation by 5-10%. Mexico City emissions can enhance NOy and O3 concentrations over the Gulf of Mexico in up to 10-20%. Mexico City emissions can convert regional ozone production regimes from VOC to NOx limited. A method of interpolation of observations along flight tracks is shown, which can be used to infer on the direction of outflow plumes. The use of ratios such as O3/NOy and NOx/NOy can be used to provide information on chemical characteristics of the plume, such as age

SBA Network Components & Software Inventory

Data.gov (United States)

Small Business Administration — SBA’s Network Components & Software Inventory contains a complete inventory of all devices connected to SBA’s network including workstations, servers, routers,...

48 CFR 49.602-2 - Inventory forms.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Inventory forms. 49.602-2... TERMINATION OF CONTRACTS Contract Termination Forms and Formats 49.602-2 Inventory forms. Standard Form (SF) 1428, Inventory Disposal Schedule, and SF 1429, Inventory Disposal Schedule—Continuation Sheet, shall...

10 CFR 850.20 - Baseline beryllium inventory.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Baseline beryllium inventory. 850.20 Section 850.20 Energy... Baseline beryllium inventory. (a) The responsible employer must develop a baseline inventory of the... inventory, the responsible employer must: (1) Review current and historical records; (2) Interview workers...

An Emission Inventory of Polycyclic Aromatic Hydrocarbons in China

Science.gov (United States)

Mu, Xilong; Zhu, Xianlei; Wang, Xuesong

2015-04-01

Polycyclic Aromatic Hydrocarbons (PAHs) are among the most dangerous compounds due to their high carcinogenic and mutagenic character. Emission inventory provides the primary data to account for the sources of ambient PAHs and server as a necessary database for effective PAHs pollution control. China is experiencing fast economic growth and large energy consumption, which might result in a large amount of PAHs anthropogenic emissions. Therefore, based on the previous studies and combined recently field emission measurements as well as socio-economic activity data, the development of a nationwide PAHs emission inventory is needed. In this work, the emission inventory of 16 PAHs listed as U.S. Environmental Protection Agency priority pollutants in China in the year 2012 is compiled. The emission amounts of PAHs were estimated as annual rates of emission-related activities multiplied by respective emission factors. The activities such as fuel consumption, including fossil fuel and biofuel, and socio-economic statistics were obtained from yearbook released by Chinese central government and/or provincial governments, as well as related industry reports. Emission factors were derived from the related literature. Recently reported emission factors from local measurements were used. The total emissions of PAHs were 120611 ton in 2012. In China, PAHs were emitted predominantly from domestic combustion of coal and biofuel, coking industry and motor vehicles, accounting for 72% of the total amount. PAHs emission profiles were significantly different between China and the other countries. The emission profile in China featured a relatively higher portion of high molecular weight species with carcinogenic potential due to large contributions of domestic combustion and coking industry. Domestic combustion of straw, coal and firewood emitted 19464 ton, 8831 ton, and 5062 ton of PAHs, respectively, which were much higher than those in other countries. Emission per capita showed

JASPAR 2018: update of the open-access database of transcription factor binding profiles and its web framework.

Science.gov (United States)

Khan, Aziz; Fornes, Oriol; Stigliani, Arnaud; Gheorghe, Marius; Castro-Mondragon, Jaime A; van der Lee, Robin; Bessy, Adrien; Chèneby, Jeanne; Kulkarni, Shubhada R; Tan, Ge; Baranasic, Damir; Arenillas, David J; Sandelin, Albin; Vandepoele, Klaas; Lenhard, Boris; Ballester, Benoît; Wasserman, Wyeth W; Parcy, François; Mathelier, Anthony

2018-01-04

JASPAR (http://jaspar.genereg.net) is an open-access database of curated, non-redundant transcription factor (TF)-binding profiles stored as position frequency matrices (PFMs) and TF flexible models (TFFMs) for TFs across multiple species in six taxonomic groups. In the 2018 release of JASPAR, the CORE collection has been expanded with 322 new PFMs (60 for vertebrates and 262 for plants) and 33 PFMs were updated (24 for vertebrates, 8 for plants and 1 for insects). These new profiles represent a 30% expansion compared to the 2016 release. In addition, we have introduced 316 TFFMs (95 for vertebrates, 218 for plants and 3 for insects). This release incorporates clusters of similar PFMs in each taxon and each TF class per taxon. The JASPAR 2018 CORE vertebrate collection of PFMs was used to predict TF-binding sites in the human genome. The predictions are made available to the scientific community through a UCSC Genome Browser track data hub. Finally, this update comes with a new web framework with an interactive and responsive user-interface, along with new features. All the underlying data can be retrieved programmatically using a RESTful API and through the JASPAR 2018 R/Bioconductor package. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

SISTEM INVENTORI BARANG DENGAN TEKNOLOGI AJAX

Directory of Open Access Journals (Sweden)

Anna Fitriya

2015-11-01

Full Text Available ABSTRAK Sistem inventori barang pada pertokoan telah banyak dikembangkan untuk meningkatkan efektivitas dan efisiensi. Pada Toko Karya Indah, kegiatan yang berkaitan dengan inventori barang masih dilakukan secara manual sehingga pihak toko kesulitan untuk mengetahui data barang yang masih tersedia, habis, atau hampir habis. Selain itu, proses yang dilakukan membutuhkan waktu yang relatif lama. Oleh karena itu, diperlukan sistem inventori barang. Sistem dibangun dengan bahasa pemrograman PHP dan database MySQL. Sistem disertai teknologi AJAX (Asynchronous JavaScript And XML, khususnya AJAX autocomplete dan AJAX validasi. Hasil yang diperoleh adalah pengolahan data pada sistem inventori barang dengan menggunakan AJAX dapat dilakukan dengan lebih cepat dari pada tanpa AJAX. Kata kunci: sistem inventori, AJAX.

Double shell tanks plutonium inventory assessment

International Nuclear Information System (INIS)

Tusler, L.A.

1995-01-01

This report provides an evaluation that establishes plutonium inventory estimates for all DSTs based on known tank history information, the DST plutonium inventory tracking system, tank characterization measurements, tank transfer records, and estimated average concentration values for the various types of waste. These estimates use data through December 31, 1994, and give plutonium estimates as of January 1, 1995. The plutonium inventory values for the DSTs are given in Section 31. The plutonium inventory estimate is 224 kg for the DSTs and 854 kg for the SSTs for a total of 1078 kg. This value compares favorably with the total plutonium inventory value of 981 kg obtained from the total plutonium production minus plutonium recovery analysis estimates

75 FR 82095 - Service Contracts Inventory

Science.gov (United States)

2010-12-29

... NUCLEAR REGULATORY COMMISSION [NRC-2010-0394] Service Contracts Inventory AGENCY: U.S. Nuclear...) is providing for public information its Inventory of Contracts for Services for Fiscal Year (FY) 2010. The inventory includes service contract actions over $25,000 that were awarded in FY 2010. ADDRESSES...

Student-Life Stress Inventory.

Science.gov (United States)

Gadzella, Bernadette M.; And Others

The reliability of the Student-Life Stress Inventory of B. M. Gadzella (1991) was studied. The inventory consists of 51 items listed in 9 sections indicating different types of stressors (frustrations, conflicts, pressures, changes, and self-imposed stressors) and reactions to the stressors (physiological, emotional, behavioral, and cognitive) as…

Uncertainties in emission inventories

NARCIS (Netherlands)

Aardenne, van J.A.

2002-01-01

Emission inventories provide information about the amount of a pollutant that is emitted to the atmosphere as a result of a specific anthropogenic or natural process at a given time or place. Emission inventories can be used for either policy or scientific purposes. For