Fuel efficiency of the Austrian passenger vehicle fleet-Analysis of trends in the technological profile and related impacts on CO2 emissions

International Nuclear Information System (INIS)

Meyer, I.; Wessely, S.

2009-01-01

This paper analyzes trends in the technological profile of the Austrian personnel vehicle fleet from 1990 to 2007. This includes the parameters of power, engine size and weight, which beyond the technological efficiency of the motor engine itself, are considered to be the main determinants of the fuel efficiency of the average car stock. Investigating the drivers of ever rising transport related greenhouse gas emissions is crucial in order to derive policies that strive towards more energy-efficient on-road passenger mobility. We focus on the efficacy of technological efficiency improvements in mitigating climate-relevant emissions from car use in light of shifting demand patterns towards bigger, heavier and more powerful cars. The analysis is descriptive in nature and based on a bottom-up database that was originally collated for the purpose of the present study. Technological data on car models, which includes tested fuel consumption, engine size, power and weight, is related to registered car stock and, in parts, to newly registered cars. From this, we obtain an original database of the Austrian passenger car fleet, i.e. information on consumer choice of specific car models, segregated by gasoline and diesel fuelled engines. Conclusions are derived for policies aimed at reducing the fossil fuel consumption of the moving vehicle fleet in order to contribute to a low carbon society.

The development of mobile computation and the related formal description

International Nuclear Information System (INIS)

Jin Yan; Yang Xiaozong

2003-01-01

The description and research for formal representation in mobile computation, which is very instructive to resolve the status transmission, domain administration, authentication. This paper presents the descriptive communicating process and computational process from the view of formal calculus, what's more, it construct a practical application used by mobile ambient. Finally, this dissertation shows the future work and direction. (authors)

A computationally efficient description of heterogeneous freezing: A simplified version of the Soccer ball model

Science.gov (United States)

Niedermeier, Dennis; Ervens, Barbara; Clauss, Tina; Voigtländer, Jens; Wex, Heike; Hartmann, Susan; Stratmann, Frank

2014-01-01

In a recent study, the Soccer ball model (SBM) was introduced for modeling and/or parameterizing heterogeneous ice nucleation processes. The model applies classical nucleation theory. It allows for a consistent description of both apparently singular and stochastic ice nucleation behavior, by distributing contact angles over the nucleation sites of a particle population assuming a Gaussian probability density function. The original SBM utilizes the Monte Carlo technique, which hampers its usage in atmospheric models, as fairly time-consuming calculations must be performed to obtain statistically significant results. Thus, we have developed a simplified and computationally more efficient version of the SBM. We successfully used the new SBM to parameterize experimental nucleation data of, e.g., bacterial ice nucleation. Both SBMs give identical results; however, the new model is computationally less expensive as confirmed by cloud parcel simulations. Therefore, it is a suitable tool for describing heterogeneous ice nucleation processes in atmospheric models.

A novel binary shape context for 3D local surface description

Science.gov (United States)

Dong, Zhen; Yang, Bisheng; Liu, Yuan; Liang, Fuxun; Li, Bijun; Zang, Yufu

2017-08-01

3D local surface description is now at the core of many computer vision technologies, such as 3D object recognition, intelligent driving, and 3D model reconstruction. However, most of the existing 3D feature descriptors still suffer from low descriptiveness, weak robustness, and inefficiency in both time and memory. To overcome these challenges, this paper presents a robust and descriptive 3D Binary Shape Context (BSC) descriptor with high efficiency in both time and memory. First, a novel BSC descriptor is generated for 3D local surface description, and the performance of the BSC descriptor under different settings of its parameters is analyzed. Next, the descriptiveness, robustness, and efficiency in both time and memory of the BSC descriptor are evaluated and compared to those of several state-of-the-art 3D feature descriptors. Finally, the performance of the BSC descriptor for 3D object recognition is also evaluated on a number of popular benchmark datasets, and an urban-scene dataset is collected by a terrestrial laser scanner system. Comprehensive experiments demonstrate that the proposed BSC descriptor obtained high descriptiveness, strong robustness, and high efficiency in both time and memory and achieved high recognition rates of 94.8%, 94.1% and 82.1% on the considered UWA, Queen, and WHU datasets, respectively.

Work-related experiences of head and neck cancer survivors: an exploratory and descriptive qualitative study

NARCIS (Netherlands)

Dewa, Carolyn S.; Trojanowski, Lucy; Tamminga, Sietske J.; Ringash, Jolie; McQuestion, Maurene; Hoch, Jeffrey S.

2017-01-01

This exploratory and descriptive study contributes to the growing knowledge about the return-to-work (RTW) experience of head and neck cancer (HNC) survivors. Viewing RTW as a process, participants were asked to consider the work-related experience with HNC at different phases: (1) at

Oral and Written Picture Description in Individuals with Aphasia

Science.gov (United States)

Vandenborre, Dorien; Visch-Brink, Evy; van Dun, Kim; Verhoeven, Jo; Mariën, Peter

2018-01-01

Background: Aphasia is characterized by difficulties in connected speech/writing. Aims: To explore the differences between the oral and written description of a picture in individuals with chronic aphasia (IWA) and healthy controls. Descriptions were controlled for productivity, efficiency, grammatical organization, substitution behaviour and…

Relational description of the measurement process in quantum field theory

International Nuclear Information System (INIS)

Gambini, Rodolfo; Porto, Rafael A.

2002-01-01

We have recently introduced a realistic, covariant, interpretation for the reduction process in relativistic quantum mechanics. The basic problem for a covariant description is the dependence of the states on the frame within which collapse takes place. A suitable use of the causal structure of the devices involved in the measurement process allowed us to introduce a covariant notion for the collapse of quantum states. However, a fully consistent description in the relativistic domain requires the extension of the interpretation to quantum fields. The extension is far from straightforward. Besides the obvious difficulty of dealing with the infinite degrees of freedom of the field theory, one has to analyse the restrictions imposed by causality concerning the allowed operations in a measurement process. In this paper we address these issues. We shall show that, in the case of partial causally connected measurements, our description allows us to include a wider class of causal operations than the one resulting from the standard way of computing conditional probabilities. This alternative description could be experimentally tested. A verification of this proposal would give stronger support to the realistic interpretations of the states in quantum mechanics. (author)

Comparing EU hospital efficiency using diagnosis-related groups

NARCIS (Netherlands)

Rhodes, G.; Wiley, M.; Tomas, R.; Casas, M.; Leidl, R.

1997-01-01

This article considers the feasibility of comparing the differences in efficiency and price in the provision of hospital products defined on the basis of diagnosis-related groups (DRGs). Two measures of resource use are compared, the length of stay and the administrative price, both independently

Relative Efficiencies of ASEAN Container Ports based on Data Envelopment Analysis

Directory of Open Access Journals (Sweden)

Nikola Kutin

2017-07-01

Full Text Available Ports play a critical role in the economies of many countries in the ASEAN region. Efficient ports facilitate a country's imports and exports, and the “relative efficiency” of a port is evaluated based on its efficiency compared to others in its group. This study analyzes the relative efficiencies of 50 ASEAN container ports and terminals. These ports are categorized according to their container handling system and location (those located in a riverbank connected to the sea are called “inland seaports” and those by the seaside are called “seaports”. The traditional output-oriented data envelopment analysis method is applied, and measures of super-efficiency constant returns to scale are estimated in order to compare the units situated on the efficiency frontier. The findings may support port managers in the ASEAN region to make decisions on whether to increase container traffic. In addition, policymakers may consider the evaluation results in deciding whether to improve the trans-ASEAN transport network and ASEAN trade competitiveness.

Relative efficiency and sample size for cluster randomized trials with variable cluster sizes.

Science.gov (United States)

You, Zhiying; Williams, O Dale; Aban, Inmaculada; Kabagambe, Edmond Kato; Tiwari, Hemant K; Cutter, Gary

2011-02-01

The statistical power of cluster randomized trials depends on two sample size components, the number of clusters per group and the numbers of individuals within clusters (cluster size). Variable cluster sizes are common and this variation alone may have significant impact on study power. Previous approaches have taken this into account by either adjusting total sample size using a designated design effect or adjusting the number of clusters according to an assessment of the relative efficiency of unequal versus equal cluster sizes. This article defines a relative efficiency of unequal versus equal cluster sizes using noncentrality parameters, investigates properties of this measure, and proposes an approach for adjusting the required sample size accordingly. We focus on comparing two groups with normally distributed outcomes using t-test, and use the noncentrality parameter to define the relative efficiency of unequal versus equal cluster sizes and show that statistical power depends only on this parameter for a given number of clusters. We calculate the sample size required for an unequal cluster sizes trial to have the same power as one with equal cluster sizes. Relative efficiency based on the noncentrality parameter is straightforward to calculate and easy to interpret. It connects the required mean cluster size directly to the required sample size with equal cluster sizes. Consequently, our approach first determines the sample size requirements with equal cluster sizes for a pre-specified study power and then calculates the required mean cluster size while keeping the number of clusters unchanged. Our approach allows adjustment in mean cluster size alone or simultaneous adjustment in mean cluster size and number of clusters, and is a flexible alternative to and a useful complement to existing methods. Comparison indicated that we have defined a relative efficiency that is greater than the relative efficiency in the literature under some conditions. Our measure

The description-experience gap and its relation to instructional control: Do people rely more on their experience than in objective descriptions?

Directory of Open Access Journals (Sweden)

Álvaro Viúdez

2017-11-01

Full Text Available The present work aims to reveal contradictory results obtained on two different fields; particularly from two studies conducted on the description-experience gap field showing that descriptions are neglected when personal experience is available (1,2, and several others conducted on the instructional control field getting to the opposite conclusion (3–8. To account for this contradiction, we hypothesized that participants from the studies of Jessup, Bishara and Busemeyer (1 and Lejarraga and Gonzalez (2 relied on their experience rather than on the descriptions because of the difficult, demanding nature of the probabilistic descriptions they faced. Enriched descriptions were created in our experiment to assess the contribution of this factor to the differential influence of the descriptions in choice behavior. Nonetheless, our hypothesis did not find support in the results and further research is needed to account for the aforementioned contradiction.

Relative efficiency calculation of a HPGe detector using MCNPX code

International Nuclear Information System (INIS)

Medeiros, Marcos P.C.; Rebello, Wilson F.; Lopes, Jose M.; Silva, Ademir X.

2015-01-01

High-purity germanium detectors (HPGe) are mandatory tools for spectrometry because of their excellent energy resolution. The efficiency of such detectors, quoted in the list of specifications by the manufacturer, frequently refers to the relative full-energy peak efficiency, related to the absolute full-energy peak efficiency of a 7.6 cm x 7.6 cm (diameter x height) NaI(Tl) crystal, based on the 1.33 MeV peak of a 60 Co source positioned 25 cm from the detector. In this study, we used MCNPX code to simulate a HPGe detector (Canberra GC3020), from Real-Time Neutrongraphy Laboratory of UFRJ, to survey the spectrum of a 60 Co source located 25 cm from the detector in order to calculate and confirm the efficiency declared by the manufacturer. Agreement between experimental and simulated data was achieved. The model under development will be used for calculating and comparison purposes with the detector calibration curve from software Genie2000™, also serving as a reference for future studies. (author)

Optimization of neural network algorithm of the land market description

Directory of Open Access Journals (Sweden)

M. A. Karpovich

2016-01-01

Full Text Available The advantages of neural network technology is shown in comparison of traditional descriptions of dynamically changing systems, which include a modern land market. The basic difficulty arising in the practical implementation of neural network models of the land market and construction products is revealed It is the formation of a representative set of training and test examples. The requirements which are necessary for the correct description of the current economic situation has been determined, it consists in the fact that Train-paid-set in the feature space should not has the ranges with a low density of observations. The methods of optimization of empirical array, which allow to avoid the long-range extrapolation of data from range of concentration of the set of examples are formulated. It is shown that a radical method of optimization a set of training and test examples enclosing to collect supplemantary information, is associated with significant costs time and resources for the economic problems and the ratio of cost / efficiency is less efficient than an algorithm optimization neural network models the earth market fixed set of empirical data. Algorithm of optimization based on the transformation of arrays of information which represents the expansion of the ranges of concentration of the set of examples and compression the ranges of low density of observations is analyzed in details. The significant reduction in the relative error of land price description is demonstrated on the specific example of Voronezh region market of lands which intend for road construction, it makes the using of radical method of empirical optimization of the array costeffective with accounting the significant absolute value of the land. The high economic efficiency of the proposed algorithms is demonstrated.

Transport properties site descriptive model. Guidelines for evaluation and modelling

International Nuclear Information System (INIS)

Berglund, Sten; Selroos, Jan-Olof

2004-04-01

This report describes a strategy for the development of Transport Properties Site Descriptive Models within the SKB Site Investigation programme. Similar reports have been produced for the other disciplines in the site descriptive modelling (Geology, Hydrogeology, Hydrogeochemistry, Rock mechanics, Thermal properties, and Surface ecosystems). These reports are intended to guide the site descriptive modelling, but also to provide the authorities with an overview of modelling work that will be performed. The site descriptive modelling of transport properties is presented in this report and in the associated 'Strategy for the use of laboratory methods in the site investigations programme for the transport properties of the rock', which describes laboratory measurements and data evaluations. Specifically, the objectives of the present report are to: Present a description that gives an overview of the strategy for developing Site Descriptive Models, and which sets the transport modelling into this general context. Provide a structure for developing Transport Properties Site Descriptive Models that facilitates efficient modelling and comparisons between different sites. Provide guidelines on specific modelling issues where methodological consistency is judged to be of special importance, or where there is no general consensus on the modelling approach. The objectives of the site descriptive modelling process and the resulting Transport Properties Site Descriptive Models are to: Provide transport parameters for Safety Assessment. Describe the geoscientific basis for the transport model, including the qualitative and quantitative data that are of importance for the assessment of uncertainties and confidence in the transport description, and for the understanding of the processes at the sites. Provide transport parameters for use within other discipline-specific programmes. Contribute to the integrated evaluation of the investigated sites. The site descriptive modelling of

Competition Efficiency Analysis of Croatian Junior Wrestlers in European Championship

Directory of Open Access Journals (Sweden)

Kristijan Slacanac

2017-06-01

Full Text Available Croatian junior wrestler won a bronze medal at the European Championship 2016 year. Considering the potential of our wrestlers there is an obvious need of technical and tactical analysis so our juniors and seniors U23 wrestlers would be able to achieve even better results. Match analysis were conducted by LongoMatch 0.20.1. Seven matches of Croatian wrestlers were analysed. Time parameters, score efficiency, technical efficiency and tactical structure were observed and analysed from the aspect of attack and defence phase and successful/unsuccessful techniques. This paper shows descriptive parameters and competitor efficiency were calculated. The results show a great number of positive score in a standing position in relation to parterre position. The parameters of competitive efficiency (0.49 points per minute show better attacking efficiency (1.32 points per minute in relation to defence efficiency (0.83 points per minute. Croatian wrestlers achieve less score per minute in relation with elite wrestlers, but it is visible a significant progress in technical and tactical efficiency in relation in the past three year. According to place realization of technique, Croatian wrestlers realized more technique in the center, while opponents realized technique in the zone and moving to the zone. Further analysis of efficiency and individualisation training will improve efficiency of Croatian national wrestlers.

Efficiency corrections in determining the 137Cs inventory of environmental soil samples by using relative measurement method and GEANT4 simulations

International Nuclear Information System (INIS)

Li, Gang; Liang, Yongfei; Xu, Jiayun; Bai, Lixin

2015-01-01

The determination of 137 Cs inventory is widely used to estimate the soil erosion or deposition rate. The generally used method to determine the activity of volumetric samples is the relative measurement method, which employs a calibration standard sample with accurately known activity. This method has great advantages in accuracy and operation only when there is a small difference in elemental composition, sample density and geometry between measuring samples and the calibration standard. Otherwise it needs additional efficiency corrections in the calculating process. The Monte Carlo simulations can handle these correction problems easily with lower financial cost and higher accuracy. This work presents a detailed description to the simulation and calibration procedure for a conventionally used commercial P-type coaxial HPGe detector with cylindrical sample geometry. The effects of sample elemental composition, density and geometry were discussed in detail and calculated in terms of efficiency correction factors. The effect of sample placement was also analyzed, the results indicate that the radioactive nuclides and sample density are not absolutely uniform distributed along the axial direction. At last, a unified binary quadratic functional relationship of efficiency correction factors as a function of sample density and height was obtained by the least square fitting method. This function covers the sample density and height range of 0.8–1.8 g/cm 3 and 3.0–7.25 cm, respectively. The efficiency correction factors calculated by the fitted function are in good agreement with those obtained by the GEANT4 simulations with the determination coefficient value greater than 0.9999. The results obtained in this paper make the above-mentioned relative measurements more accurate and efficient in the routine radioactive analysis of environmental cylindrical soil samples. - Highlights: • Determination of 137 Cs inventory in environmental soil samples by using relative

A coarse grained description of time evolution: Irreversible state reduction and time-energy relation

International Nuclear Information System (INIS)

Bonifacio, R.; Milan Univ.

1983-05-01

We show that a proper coarse-grained description of time evolution leads to a finite difference equation with step tau for the density operator. This implies state reduction to the diagonal form in the energy representation and a quasi ergodic behaviour of quantum mechanical ensemble averages. An intrinsic time-energy relation tauΔE>=(h/2π)/2 is proposed, and its equivalence to a time quantization is discussed. (author)

Efficiency and abatement costs of energy-related CO2 emissions in China: A slacks-based efficiency measure

International Nuclear Information System (INIS)

Choi, Yongrok; Zhang, Ning; Zhou, P.

2012-01-01

Highlights: ► We employ a slacks-based DEA model to estimate the energy efficiency and shadow prices of CO 2 emissions in China. ► The empirical study shows that China was not performing CO 2 -efficiently. ► The average of estimated shadow prices of CO 2 emissions is about $7.2. -- Abstract: This paper uses nonparametric efficiency analysis technique to estimate the energy efficiency, potential emission reductions and marginal abatement costs of energy-related CO 2 emissions in China. We employ a non-radial slacks-based data envelopment analysis (DEA) model for estimating the potential reductions and efficiency of CO 2 emissions for China. The dual model of the slacks-based DEA model is then used to estimate the marginal abatement costs of CO 2 emissions. An empirical study based on China’s panel data (2001–2010) is carried out and some policy implications are also discussed.

Efficiency corrections in determining the (137)Cs inventory of environmental soil samples by using relative measurement method and GEANT4 simulations.

Science.gov (United States)

Li, Gang; Liang, Yongfei; Xu, Jiayun; Bai, Lixin

2015-08-01

The determination of (137)Cs inventory is widely used to estimate the soil erosion or deposition rate. The generally used method to determine the activity of volumetric samples is the relative measurement method, which employs a calibration standard sample with accurately known activity. This method has great advantages in accuracy and operation only when there is a small difference in elemental composition, sample density and geometry between measuring samples and the calibration standard. Otherwise it needs additional efficiency corrections in the calculating process. The Monte Carlo simulations can handle these correction problems easily with lower financial cost and higher accuracy. This work presents a detailed description to the simulation and calibration procedure for a conventionally used commercial P-type coaxial HPGe detector with cylindrical sample geometry. The effects of sample elemental composition, density and geometry were discussed in detail and calculated in terms of efficiency correction factors. The effect of sample placement was also analyzed, the results indicate that the radioactive nuclides and sample density are not absolutely uniform distributed along the axial direction. At last, a unified binary quadratic functional relationship of efficiency correction factors as a function of sample density and height was obtained by the least square fitting method. This function covers the sample density and height range of 0.8-1.8 g/cm(3) and 3.0-7.25 cm, respectively. The efficiency correction factors calculated by the fitted function are in good agreement with those obtained by the GEANT4 simulations with the determination coefficient value greater than 0.9999. The results obtained in this paper make the above-mentioned relative measurements more accurate and efficient in the routine radioactive analysis of environmental cylindrical soil samples. Copyright © 2015 Elsevier Ltd. All rights reserved.

Buildings sector demand-side efficiency technology summaries

Energy Technology Data Exchange (ETDEWEB)

Koomey, J.G.; Johnson, F.X.; Schuman, J. [and others

1994-03-01

This report provides descriptions of the following energy efficiency technologies: energy management systems; electronic fluorescent ballasts; compact fluorescent lamps; lighting controls; room air conditioners; high albedo materials, coatings and paints; solar domestic water heaters; heat pump water heaters; energy-efficient motors; adjustable-speed drives; energy-efficient refrigerators; daylight control glazing; insulating glazing; solar control glazing; switchable glazing; tree planting; and advanced insulation. For each technology, the report provides a description of performance characteristics, consumer utility, development status, technology standards, equipment cost, installation, maintenance, conservation programs, and environmental impacts.

Myasthenia Gravis Impairment Index: Responsiveness, meaningful change, and relative efficiency.

Science.gov (United States)

Barnett, Carolina; Bril, Vera; Kapral, Moira; Kulkarni, Abhaya V; Davis, Aileen M

2017-12-05

To study responsiveness and meaningful change of the Myasthenia Gravis Impairment Index (MGII) and its relative efficiency compared to other measures. We enrolled 95 patients receiving prednisone, IV immunoglobulin (IVIg), or plasma exchange (PLEX) and 54 controls. Patients were assessed with the MGII and other measures-including the Quantitative Myasthenia Gravis Score, Myasthenia Gravis Composite, and Myasthenia Gravis Activities of Daily Living-at baseline and 3-4 weeks after treatment. Statistical markers of responsiveness included between-groups and within-group differences, and we estimated the relative efficiency of the MGII compared to other measures. Patient-meaningful change was assessed with an anchor-based method, using the patient's impression of change. We determined the minimal detectable change (MDC) and the minimal important difference (MID) at the group and individual level. Treated patients had a higher change in MGII scores than controls (analysis of covariance p 1 favoring the MGII. The MGII demonstrated responsiveness to prednisone, IVIg, and PLEX in patients with myasthenia. There is a differential response in ocular and generalized symptoms to type of therapy. The MGII has higher relative efficiency than comparison measures and is viable for use in clinical trials. Copyright © 2017 The Author(s). Published by Wolters Kluwer Health, Inc. on behalf of the American Academy of Neurology.

Determination of relative efficiency of a detector using Monte Carlo method

International Nuclear Information System (INIS)

Medeiros, M.P.C.; Rebello, W.F.; Lopes, J.M.; Silva, A.X.

2015-01-01

High-purity germanium detectors (HPGe) are mandatory tools for spectrometry because of their excellent energy resolution. The efficiency of such detectors, quoted in the list of specifications by the manufacturer, frequently refers to the relative full-energy peak efficiency, related to the absolute full-energy peak efficiency of a 7.6 cm x 7.6 cm (diameter x height) NaI(Tl) crystal, based on the 1.33 MeV peak of a 60 Co source positioned 25 cm from the detector. In this study, we used MCNPX code to simulate an HPGe detector (Canberra GC3020), from Real-Time Neutrongraphy Laboratory of UFRJ, to survey the spectrum of a 60 Co source located 25 cm from the detector in order to calculate and confirm the efficiency declared by the manufacturer. Agreement between experimental and simulated data was achieved. The model under development will be used for calculating and comparison purposes with the detector calibration curve from software Genie2000™, also serving as a reference for future studies. (author)

“Influence Method”. Detailed mathematical description

International Nuclear Information System (INIS)

Rios, I.J.; Mayer, R.E.

2015-01-01

A new method for the absolute determination of nuclear particle flux in the absence of known detector efficiency, the “Influence Method”, was recently published (I.J. Rios and R.E. Mayer, Nuclear Instruments & Methods in Physics Research A 775 (2015) 99–104). The method defines an estimator for the population and another estimator for the efficiency. In this article we present a detailed mathematical description which yields the conditions for its application, the probability distributions of the estimators and their characteristic parameters. An analysis of the different cases leads to expressions of the estimators and their uncertainties. - Highlights: • “Influence Method”, a new method for absolute particle flux determination. • Absolute counting method when detector efficiencies are not known. • Absolute detector efficiency determination

Soft Biometrics; Human Identification Using Comparative Descriptions.

Science.gov (United States)

Reid, Daniel A; Nixon, Mark S; Stevenage, Sarah V

2014-06-01

Soft biometrics are a new form of biometric identification which use physical or behavioral traits that can be naturally described by humans. Unlike other biometric approaches, this allows identification based solely on verbal descriptions, bridging the semantic gap between biometrics and human description. To permit soft biometric identification the description must be accurate, yet conventional human descriptions comprising of absolute labels and estimations are often unreliable. A novel method of obtaining human descriptions will be introduced which utilizes comparative categorical labels to describe differences between subjects. This innovative approach has been shown to address many problems associated with absolute categorical labels-most critically, the descriptions contain more objective information and have increased discriminatory capabilities. Relative measurements of the subjects' traits can be inferred from comparative human descriptions using the Elo rating system. The resulting soft biometric signatures have been demonstrated to be robust and allow accurate recognition of subjects. Relative measurements can also be obtained from other forms of human representation. This is demonstrated using a support vector machine to determine relative measurements from gait biometric signatures-allowing retrieval of subjects from video footage by using human comparisons, bridging the semantic gap.

Coping efficiently with now-relative medical data.

Science.gov (United States)

Stantic, Bela; Terenziani, Paolo; Sattar, Abdul

2008-11-06

In Medical Informatics, there is an increasing awareness that temporal information plays a crucial role, so that suitable database approaches are needed to store and support it. Specifically, most clinical data are intrinsically temporal, and a relevant part of them are now-relative (i.e., they are valid at the current time). Even if previous studies indicate that the treatment of now-relative data has a crucial impact on efficiency, current approaches have several limitations. In this paper we propose a novel approach, which is based on a new representation of now, and on query transformations. We also experimentally demonstrate that our approach outperforms its best competitors in the literature to the extent of a factor of more than ten, both in number of disk accesses and of CPU usage.

Testing the Weak Form Efficiency of Karachi Stock Exchange

Directory of Open Access Journals (Sweden)

Muhammad Arshad Haroon

2012-12-01

Full Text Available In an efficient market, share prices reflect all available information. The study of efficient market hypothesis helps to take right decisions related to investments. In this research,weak form efficiency has been tested of Karachi Stock Exchange—KSE covering the period of 2nd November 1991 to 2nd November 2011. Descriptive statistics indicated the absence of weak form efficiency while results of non-parametric tests, showed consistency as well. We employed non-parametric tests were KS Goodness-of-Fit test,run test and autocorrelation test to find out serial independency of the data. Results prove that KSE is not weak-form-efficient. This happens because KSE is an emerging market and there, it has been observed that information take time to be processed. Thus it can besaid that technical analysis may be applied to gain abnormal returns.

Network efficiency in autism spectrum disorder and its relation to brain overgrowth

Directory of Open Access Journals (Sweden)

John D Lewis

2013-12-01

Full Text Available A substantial body of evidence links differences in brain size to differences in brain organization. We have hypothesized that the developmental aspect of this relation plays a role in autism spectrum disorder (ASD, a neurodevelopmental disorder which involves abnormalities in brain growth. Children with ASD have abnormally large brains by the second year of life, and for several years thereafter their brain size can be multiple standard deviations above the norm. The greater conduction delays and cellular costs presumably associated with the longer long-distance connections in these larger brains is thought to influence developmental processes, giving rise to an altered brain organization with less communication between spatially distant regions. This has been supported by computational models and by findings linking greater intra-cranial volume, an index of maximum brain-size during development, to reduced inter-hemispheric connectivity in individuals with ASD. In this paper, we further assess this hypothesis via a whole-brain analysis of network efficiency. We utilize diffusion tractography to estimate the strength and length of the connections between all pairs of cortical regions. We compute the efficiency of communication between each network node and all others, and within local neighborhoods; we then assess the relation of these measures to intra-cranial volume, and the differences in these measures between adults with autism and typical controls. Intra-cranial volume is shown to be inversely related to efficiency for wide-spread regions of cortex. Moreover, the spatial patterns of reductions in efficiency in autism bear a striking resemblance to the regional relationships between efficiency and intra-cranial volume, particularly for local efficiency. The results thus provide further support for the hypothesized link between brain overgrowth in children with autism and the efficiency of the organization of the brain in adults with autism.

The relative efficiency of bank branches in lending and borrowing: An application of data envelopment analysis

Directory of Open Access Journals (Sweden)

G van der Westhuizen

2014-08-01

Full Text Available The relative efficiency of fifty-two branches of a small South African bank was estimated using Data Envelopment Analysis (DEA.  A factor responsible for the difference in efficiency between branches might be the difference in managing the asset (loans and the liability (deposit side of the balance sheet.  For this reason, the relative efficiency of the lending and borrowing activities was also estimated and compared to the relative efficiency of the combined (lending and borrowing activities.In the case of the efficiency estimates for loans and deposits, the indications are that the branches were more efficient in managing the liability side (deposits than  in managing the asset side (loans.  This means that purchased funds were not utilised efficiently.

Nutritional efficiency of alpha-ketoisocaproate relative to leucine, assessed isotopically

International Nuclear Information System (INIS)

Kang, C.W.; Walser, M.

1985-01-01

The efficiency of alpha-ketoisocaproate as a dietary substitute for leucine was assessed in rats by two techniques: first, the minimal dose of alpha-ketoisocaproate required, as a supplement to a leucine-free diet, to achieve a growth rate as great as animals receiving leucine was found to be between 2.2 and 4.4 times larger. Therefore the nutritional efficiency of alpha-ketoisocaproate lies between 0.23 and 0.46. Second, alpha-[1- 14 C]-ketoisocaproate and [ 3 H]leucine were administered orally and the ratio of 14 C/ 3 H incorporated into the leucine of whole-body protein and fibrin was measured. This ratio, divided by the ratio 14 C/ 3 H injected, was the same in fibrin as in whole-body protein and averaged 0.39. Thus both techniques yield the same value, within the error of measurement, for the relative nutritional efficiency of alpha-ketoisocaproate. The authors also found that alpha-ketoisocaproate feeding at varying dosage did not alter this ratio in whole-body protein, suggesting that neither wide variations in growth rate nor exposure for 10 days to alpha-ketoisocaproate alters the relative rates of utilization (or oxidation) of alpha-ketoisocaproate vs. leucine

Nutritional efficiency of alpha-ketoisocaproate relative to leucine, assessed isotopically

Energy Technology Data Exchange (ETDEWEB)

Kang, C.W.; Walser, M.

1985-10-01

The efficiency of alpha-ketoisocaproate as a dietary substitute for leucine was assessed in rats by two techniques: first, the minimal dose of alpha-ketoisocaproate required, as a supplement to a leucine-free diet, to achieve a growth rate as great as animals receiving leucine was found to be between 2.2 and 4.4 times larger. Therefore the nutritional efficiency of alpha-ketoisocaproate lies between 0.23 and 0.46. Second, alpha-(1- UC)-ketoisocaproate and (TH)leucine were administered orally and the ratio of UC/TH incorporated into the leucine of whole-body protein and fibrin was measured. This ratio, divided by the ratio UC/TH injected, was the same in fibrin as in whole-body protein and averaged 0.39. Thus both techniques yield the same value, within the error of measurement, for the relative nutritional efficiency of alpha-ketoisocaproate. The authors also found that alpha-ketoisocaproate feeding at varying dosage did not alter this ratio in whole-body protein, suggesting that neither wide variations in growth rate nor exposure for 10 days to alpha-ketoisocaproate alters the relative rates of utilization (or oxidation) of alpha-ketoisocaproate vs. leucine.

Predictors of health-related quality of life among industrial workers: A descriptive correlational study.

Science.gov (United States)

Malak, Malakeh Z

2017-06-01

Assessment and evaluation of the health-related quality of life of industrial workers is an important research focus. This descriptive correlational study identifies the predictors of health-related quality of life using a random sampling of industrial workers (n = 640) from construction factories in Amman Governorate in Jordan using demographic characteristics, a health and work-related factors questionnaire, and the World Health Organization Quality of Life-Brief scale. Results showed that industrial workers had good physical health but a poor working environment. There was a statistically significant relationship between educational level, conflict between work and individual life and work and social life, working hours, and workload, and all domains of health-related quality of life. Overall, educational level was the main predictor for all domains of health-related quality of life. Such results confirm the need to develop appropriate interventions and strategies to improve workers' health-related quality of life. Furthermore, developing an integrated approach among policymakers, employers, and work organizations to enhance industrial workers' occupational health programs could be effective. © 2017 John Wiley & Sons Australia, Ltd.

Study on calibration of neutron efficiency and relative photo-yield of plastic scintillator

International Nuclear Information System (INIS)

Peng Taiping; Zhang Chuanfei; Li Rurong; Zhang Jianhua; Luo Xiaobing; Xia Yijun; Yang Zhihua

2002-01-01

A method used for the calibration of neutron efficiency and the relative photo yield of plastic scintillator is studied. T(p, n) and D(d, n) reactions are used as neutron resources. The neutron efficiencies and the relative photo yields of plastic scintillators 1421 (40 mm in diameter and 5 mm in thickness) and determined in the neutron energy range of 0.655-5 MeV

Trends concerning description of radiation and nuclear-related matters in current textbooks used at junior and senior high schools in Japan

International Nuclear Information System (INIS)

Matsuura, Tatsuo; Sekimoto, Junko; Takagi, Shinji; Iiri, Yuichi

2005-01-01

Descriptions on topics concerning radiation and nuclear energy in textbooks currently used in junior and senior high schools in Japan have been examined and summarized. As for the textbooks used in junior high schools, both in science studies and in social (geography/society) studies, the description is unsatisfactory for the reviewers in the following points: the space describing the radiation and nuclear-related problems has become considerably reduced than before, and as a general tendency the demerits of nuclear-related matters are stressed than the merits, while the renewable energies are much more favorably treated than the actual role. As for the textbooks of senior high schools on science studies written based on the new education guidelines, the present reviewers acknowledge the description has considerably been improved than before. However, as for those in the fields of social studies, geography/history, etc., the situation is similar to the cases of junior high schools described above. That is, the description on radiation and nuclear-related matters are generally not sufficient, and incorrect or unfair views on the value of nuclear energy are sometimes seen, in such a manner that the demerits of nuclear energy production or anxiety for radiation/radioactivity and for waste disposal are treated in much space than the merits, in special reference to the cases of nuclear accidents. (author)

Energy-efficient electric motors study

Science.gov (United States)

1981-03-01

A survey conducted of purchasers of integral horsepower polyphase motors measured current knowledge of and awareness of energy efficient motors, decision making criteria, information sources, purchase and usage patterns, and related factors. The data obtained were used for the electric motor market penetration analysis. Additionally, a telephone survey was made. The study also provides analyses of distribution channels, commercialization constraints, and the impacts of government programs and rising energy prices. Study findings, conclusions, and recommendations are presented. Sample questionnaires and copies of letters to respondents are presented in appendices as well as descriptions of the methods used.

Market Efficiency within the German Stock Market: A Comparative Study of the Relative Efficiencies of the DAX, MDAX, SDAX and ASE Indices

OpenAIRE

Starcevic, Admin; Rodgers, Timothy

2011-01-01

It can be implied from the efficient market hypothesis that the more transparent a market is, then the more likely that the market will be efficient. This paper is a study of whether the different transparency standards applied to the different indices quoted on the German stock market have any impact on their relative efficiencies. It is found that the differences in transparency standards do have an impact on market efficiency. The case for a higher level of market efficiency in res...

Minimum Description Length Shape and Appearance Models

DEFF Research Database (Denmark)

Thodberg, Hans Henrik

2003-01-01

The Minimum Description Length (MDL) approach to shape modelling is reviewed. It solves the point correspondence problem of selecting points on shapes defined as curves so that the points correspond across a data set. An efficient numerical implementation is presented and made available as open s...

DEA best practice assesses relative efficiency, profitability

International Nuclear Information System (INIS)

Taylor, D.T.; Thompson, R.G.

1995-01-01

The US Federal Energy Regulatory Commission (FERC), in its Order 636 of Apr. 8, 1992, stated, ''All natural gas suppliers, including pipelines, will compete for gas purchases on an equal footing.'' This FERC order changed the economic environment in the natural gas pipeline industry. Now, gas pipeline companies must know their market position, since rate of return regulation is no longer relevant. They must be managed more than before as companies have been in less-regulated parts of the oil and gas business. How they adapt to the new environment, therefore, can be instructive to companies throughout the energy industry. In this article, DEA best-practice methods measure relative efficiency and profitability potential. This measurement reflects fundamental economic relationships. The operational efficiency model analyzed is as follows: Y 1 = f(x 1 , x 2 ), where Y 1 is gross profits, x 1 is total assets (capital employed), and x 2 is total employees (labor employed). Y 1 is a comprehensive indicator of a pipeline's output, whereas x 1 represents the pipeline's total capital employed, and x 2 represents the pipeline's total labor employed. This model reflects principles long studied in economics

The Onsager reciprocity relation and generalized efficiency of a thermal Brownian motor

International Nuclear Information System (INIS)

Tian-Fu, Gao; Jin-Can, Chen; Yue, Zhang

2009-01-01

Based on a general model of Brownian motors, the Onsager coefficients and generalized efficiency of a thermal Brownian motor are calculated analytically. It is found that the Onsager reciprocity relation holds and the Onsager coefficients are not affected by the kinetic energy change due to the particle's motion. Only when the heat leak in the system is negligible can the determinant of the Onsager matrix vanish. Moreover, the influence of the main parameters characterizing the model on the generalized efficiency of the Brownian motor is discussed in detail. The characteristic curves of the generalized efficiency varying with these parameters are presented, and the maximum generalized efficiency and the corresponding optimum parameters are determined. The results obtained here are of general significance. They are used to analyze the performance characteristics of the Brownian motors operating in the three interesting cases with zero heat leak, zero average drift velocity or a linear response relation, so that some important conclusions in current references are directly included in some limit cases of the present paper. (general)

Highly accurate determination of relative gamma-ray detection efficiency for Ge detector and its application

International Nuclear Information System (INIS)

Miyahara, H.; Mori, C.; Fleming, R.F.; Dewaraja, Y.K.

1997-01-01

When quantitative measurements of γ-rays using High-Purity Ge (HPGe) detectors are made for a variety of applications, accurate knowledge of oy-ray detection efficiency is required. The emission rates of γ-rays from sources can be determined quickly in the case that the absolute peak efficiency is calibrated. On the other hand, the relative peak efficiencies can be used for determination of intensity ratios for plural samples and for comparison to the standard source. Thus, both absolute and relative detection efficiencies are important in use of γ-ray detector. The objective of this work is to determine the relative gamma-ray peak detection efficiency for an HPGe detector with the uncertainty approaching 0.1% . We used some nuclides which emit at least two gamma-rays with energies from 700 to 2400 keV for which the relative emission probabilities are known with uncertainties much smaller than 0.1%. The relative peak detection efficiencies were calculated from the measurements of the nuclides, 46 Sc, 48 Sc, 60 Co and 94 Nb, emitting two γ- rays with the emission probabilities of almost unity. It is important that various corrections for the emission probabilities, the cascade summing effect, and the self-absorption are small. A third order polynomial function on both logarithmic scales of energy and efficiency was fitted to the data, and the peak efficiency predicted at certain energy from covariance matrix showed the uncertainty less than 0.5% except for near 700 keV. As an application, the emission probabilities of the 1037.5 and 1212.9 keV γ-rays for 48 Sc were determined using the function of the highly precise relative peak efficiency. Those were 0.9777+0,.00079 and 0.02345+0.00017 for the 1037.5 and 1212.9 keV γ-rays, respectively. The sum of these probabilities is close to unity within the uncertainty which means that the certainties of the results are high and the accuracy has been improved considerably

An application of data envelopment analysis for measuring the relative efficiency in banking industry

Directory of Open Access Journals (Sweden)

Mehdi Soltanifar

2014-05-01

Full Text Available Measuring the relative efficiency of banking industry has been a popular subject among both practitioners and academicians. Data envelopment analysis (DEA has been widely applied for different purposes. This paper presents an empirical investigation to measure the relative efficiency of various banks located in province of Semnan, Iran. The proposed study uses DEA method to rank all units and using Anderson and Peterson method (1993 [Andersen, P., & Petersen, N. C. (1993. A procedure for ranking efficient units in data envelopment analysis. Management Science, 39, 1261-1264], we provide some super efficiency for inefficient units. The study also provides reference numbers for inefficient units and gives some target values for all inefficient units.

The Relative Efficiency of Charter Schools: A Cost Frontier Approach

Science.gov (United States)

Gronberg, Timothy J.; Jansen, Dennis W.; Taylor, Lori L.

2012-01-01

Charters represent an expansion of public school choice, offering free, publicly funded educational alternatives to traditional public schools. One relatively unexplored research question concerning charter schools asks whether charter schools are more efficient suppliers of educational services than are traditional public schools. The potential…

A robust AHP-DEA method for measuring the relative efficiency: An application of airport industry

Directory of Open Access Journals (Sweden)

Amin Foroughi

2012-01-01

Full Text Available Measuring the relative efficiency of similar units has been an important topic of research among many researchers. Data envelopment analysis has been one of the most important techniques for measuring the efficiency of different units. However, there are some limitations on using such technique and some people prefer to use other methods such as analytical hierarchy process to measure the relative efficiencies. Besides, uncertainty in the input data is another issue, which makes some misleading results. In this paper, we present an integrated robust DEA-AHP to measure the relative efficiency of similar units. The proposed model of this is believed to capable of presenting better results in terms of efficiency compared with exclusive usage of DEA or AHP. The implementation of the proposed model is demonstrated for a real-world case study of Airport industry and the results are analyzed.

Catalogue of Energy Efficiency Measures for France: descriptive fact sheets

International Nuclear Information System (INIS)

2012-06-01

ADEME wished to learn about existing effective energy efficiency measures implemented outside of France, whether cross-sectoral or targeted at a specific sector (industry, transport, buildings or agriculture). The objective of this survey was to determine whether any of these measures could be applied in France, with the goal of holding down the growth of energy consumption. This survey has led to the writing of a catalog of 53 two-page fact sheets describing the measures identified as interesting for France. These measures were analysed via classic criteria of evaluation such as cost-efficiency or impact, allowing to highlight the most successful measures for the French territory

International Congress on Energy Efficiency and Energy Related Materials

CERN Document Server

Bahsi, Zehra; Ozer, Mehmet; ENEFM2013

2014-01-01

The International Congress on Energy Efficiency and Energy Related Materials (ENEFM2013) was held on 9-12 October, 2013. This three-day congress focused on the latest developments of sustainable energy technologies, materials for sustainable energy applications and environmental & economic perspectives of energy. These proceedings include 63 peer reviewed technical papers, submitted from leading academic and research institutions from over 23 countries, representing some of the most cutting edge research available. The papers included were presented at the congress in the following sessions: General Issues Wind Energy Solar Energy Nuclear Energy Biofuels and Bioenergy Energy Storage Energy Conservation and Efficiency Energy in Buildings   Economical and Environmental Issues Environment Energy Requirements Economic Development   Materials for Sustainable Energy Hydrogen Production and Storage Photovoltaic Cells Thermionic Converters Batteries and Superconductors Phase Change Materials Fuel Cells Supercon...

An observational study showed that explaining randomization using gambling-related metaphors and computer-agency descriptions impeded RCT recruitment.

Science.gov (United States)

Jepson, Marcus; Elliott, Daisy; Conefrey, Carmel; Wade, Julia; Rooshenas, Leila; Wilson, Caroline; Beard, David; Blazeby, Jane M; Birtle, Alison; Halliday, Alison; Stein, Rob; Donovan, Jenny L

2018-03-02

To explore how the concept of randomisation is described by clinicians and understood by patients in randomised clinical trials (RCTs), and how it contributes to patient understanding and recruitment. Qualitative analysis of seventy-three audio recordings of recruitment consultations from five, multi-centre, UK based RCTs with identified or anticipated recruitment difficulties. One in ten appointments did not include any mention of randomisation. Most included a description of the method or process of allocation. Descriptions often drew on gambling-related metaphors or similies, or referred to allocation by a computer. Where reference was made to a computer, some patients assumed that they would receive the treatment that was 'best for them'. Descriptions of the rationale for randomisation were rarely present, and often only came about as a consequence of patients questioning the reason for a random allocation. The methods and processes of randomisation were usually described by recruiters, but often without clarity, which could lead to patient misunderstanding. The rationale for randomisation was rarely mentioned. Recruiters should avoid problematic gambling metaphors and illusions of agency in their explanations, and instead focus on clearer descriptions of the rationale and method of randomisation to ensure patients are better informed about randomisation and RCT participation. Copyright © 2018. Published by Elsevier Inc.

The Colonization of Private Relationships by the Economic Discourse: A Critic to Descriptive Models of Company

Directory of Open Access Journals (Sweden)

Sergio Marcos Carvalho de Avila Negri

2015-12-01

Full Text Available Through the reconstructive method of approach and by adopting the communicative rationality habermasian as epistemological framework, this paper discusses the process of colonization of private relations by economic discourse in the corporate field. It examines, in particular, descriptive models of business relationships, as the nexus of contracts theory and dispute resolution forms as the "default rule" and the "hypothetical bargain." With a content analysis of these models, it investigates the hypothesis that there are non-problematized normative claims in the descriptions of business relationships and decision-making in the corporate field, such as specialization and efficiency while rationality parameters. It addresses procedural and substantive objections to the approached models.

Efficiency performance of China's health care delivery system.

Science.gov (United States)

Zhang, Luyu; Cheng, Gang; Song, Suhang; Yuan, Beibei; Zhu, Weiming; He, Li; Ma, Xiaochen; Meng, Qingyue

2017-07-01

Improving efficiency performance of the health care delivery system has been on the agenda for the health system reform that China initiated in 2009. This study examines the changes in efficiency performance and determinants of efficiency after the reform to provide evidence to assess the progress of the reform from the perspective of efficiency. Descriptive analysis, Data Envelopment Analysis, the Malmquist Index, and multilevel regressions are used with data from multiple sources, including the World Bank, the China Health Statistical Yearbook, and routine reports. The results indicate that over the last decade, health outcomes compared with health investment were relatively higher in China than in most other countries worldwide, and the trend was stable. The overall efficiency and total factor productivity increased after the reform, indicating that the reform was likely to have had a positive impact on the efficiency performance of the health care delivery system. However, the health care delivery structure showed low system efficiency, mainly attributed to the weakened primary health care system. Strengthening the primary health care system is central to enhancing the future performance of China's health care delivery system. Copyright © 2017 John Wiley & Sons, Ltd.

Under-triage in telephone consultation is related to non-normative symptom description and interpersonal communication: a mixed methods study.

Science.gov (United States)

Gamst-Jensen, Hejdi; Lippert, Freddy K; Egerod, Ingrid

2017-05-15

Telephone consultation and triage are used to limit the workload on emergency departments. Lack of visual cues and clinical tests put telephone consultations to a disadvantage compared to face-to-face consultations increasing the risk of under-triage. Under-triage occurs in telephone triage; however why under-triage happens is not explored yet. The aim of the study was to describe situations of under-triage in context, to assess the quality of under-triaged calls, and to identify communication patterns contributing to under-triage in a regional OOH service in the capital region of Denmark. Explanatory simultaneous mixed method with thematic analysis and descriptive statistics was chosen. The study was carried out in an Out-Of-Hours service (OOH) in the Capital Region of Denmark, Copenhagen. Under-triage was defined as Potentially Under-Triaged Calls (PUTC) by specific criteria to an OOH Hotline, and identification by integration of three databases: Medical Hotline database, Emergency number database, including the Ambulance database, and electronic patient records. Distribution of PUTC were carried out using ICD-10 codes to identify diagnosis and main themes identified by qualitative analysis of audio recorded under-triaged calls. Study period was October 15 th to November 30 th 2014. Three hundred twenty seven PUTC were identified, representing 0.04% of all calls (n = 937.056) to the OOH. Distribution of PUTC according to diagnoses was: digestive (24%), circulatory (19%), respiratory (15%) and all others (42%). Thematic analysis of the voice logs suggested that inadequate communication and non-normative symptom description contributed to under-triage. The incidence of potentially under-triage is low (0.04%). However, the over-representation of digestive, circulatory, and respiratory diagnoses might suggest that under-triage is related to inadequate symptom description. We recommend that caller and call-handler collaborate systematically on problem

How phonological awareness mediates the relation between working memory and word reading efficiency in children with dyslexia.

Science.gov (United States)

Knoop-van Campen, Carolien A N; Segers, Eliane; Verhoeven, Ludo

2018-05-01

This study examined the relation between working memory, phonological awareness, and word reading efficiency in fourth-grade children with dyslexia. To test whether the relation between phonological awareness and word reading efficiency differed for children with dyslexia versus typically developing children, we assessed phonological awareness and word reading efficiency in 50 children with dyslexia (aged 9;10, 35 boys) and 613 typically developing children (aged 9;5, 279 boys). Phonological awareness was found to be associated with word reading efficiency, similar for children with dyslexia and typically developing children. To find out whether the relation between working memory and word reading efficiency in the group with dyslexia could be explained by phonological awareness, the children with dyslexia were also tested on working memory. Results of a mediation analysis showed a significant indirect effect of working memory on word reading efficiency via phonological awareness. Working memory predicted reading efficiency, via its relation with phonological awareness in children with dyslexia. This indicates that working memory is necessary for word reading efficiency via its impact on phonological awareness and that phonological awareness continues to be important for word reading efficiency in older children with dyslexia. © 2018 The Authors Dyslexia Published by John Wiley & Sons Ltd.

Overview and theory relating to the concepts of competitiveness, efficiency and productivity

OpenAIRE

Latruffe, Laure

2017-01-01

This is a brief overview and theory relating to the concepts of competitiveness, efficiency and productivity: concept of competitiveness, measurement of competitiveness, determinants of competitiveness.

Relative dose efficiencies of antiscatter grids and air gaps in pediatric radiography

International Nuclear Information System (INIS)

McDaniel, D.L.; Cohen, G.; Wagner, L.K.; Robinson, L.H.

1984-01-01

The relative dose efficiencies (RDE) of various antiscatter grids and air gaps were determined for conditions simulating those found in pediatric radiography, using phantoms representing a newborn child, a 5-yr-old and a 10-yr-old child. Our data indicate than an air gap is best for the newborn, due to the low levels of scatter. The 8:1 fiber grid or 15.2-cm air gap without a grid can improve dose efficiency (DE) for the 5-yr-old child by 20%--25% relative to the 3.3-cm air gap and no-grid technique, while for the 10-yr-old child, DE can be improved by 40% with an 8:1 fiber grid

Relative Contributions of Three Descriptive Methods: Implications for Behavioral Assessment

Science.gov (United States)

Pence, Sacha T.; Roscoe, Eileen M.; Bourret, Jason C.; Ahearn, William H.

2009-01-01

This study compared the outcomes of three descriptive analysis methods--the ABC method, the conditional probability method, and the conditional and background probability method--to each other and to the results obtained from functional analyses. Six individuals who had been diagnosed with developmental delays and exhibited problem behavior…

The promotion of energy efficiency in Italy

International Nuclear Information System (INIS)

De Paoli, L.; Bongiolatti, L.

2006-01-01

In 2004 Italy introduced an obligation for electricity and gas distribution companies to reach specific objectives regarding the improvement of energy efficiency in final energy consumption. The scope of the provision is to promote investments in energy efficiency in order to meet the greenhouse gases reduction target set by the Kyoto protocol. The adoption of binding targets of energy efficiency will also lead to the development of an energy services market, modifying the traditional relation between energy dealers and final consumers, thus leading to a more efficient use of the available resources. Similar mechanisms have already been applied in other European countries (as France and United Kingdom) and will be likely introduced in other countries with the implementation of European Directive on energy end-use efficiency and energy services. This paper describes and analyzes both the measures adopted in Italy and the results obtained after the first year of operation of the mechanism. The paper is divided in six different sections. In the first part we highlight the main problems related to the development of system based on tradable white certificates. In the second part we provide a brief description of the Italian regulatory context. In the third part there is an economic analysis of investments in energy efficiency. The fourth part considers the different options that distribution companies face in order to reach the energy efficiency targets. The fifth part shows the results obtained after the first year of operation of the mechanism. Finally, we propose some possible modifications to the scheme adopted in Italy considering the results obtained and the alternative solutions already applied in France and United Kingdom [it

A method to identify energy efficiency measures for factory systems based on qualitative modeling

CERN Document Server

Krones, Manuela

2017-01-01

Manuela Krones develops a method that supports factory planners in generating energy-efficient planning solutions. The method provides qualitative description concepts for factory planning tasks and energy efficiency knowledge as well as an algorithm-based linkage between these measures and the respective planning tasks. Its application is guided by a procedure model which allows a general applicability in the manufacturing sector. The results contain energy efficiency measures that are suitable for a specific planning task and reveal the roles of various actors for the measures’ implementation. Contents Driving Concerns for and Barriers against Energy Efficiency Approaches to Increase Energy Efficiency in Factories Socio-Technical Description of Factory Planning Tasks Description of Energy Efficiency Measures Case Studies on Welding Processes and Logistics Systems Target Groups Lecturers and Students of Industrial Engineering, Production Engineering, Environmental Engineering, Mechanical Engineering Practi...

Access Efficiency to Data in DIM DBMS

Directory of Open Access Journals (Sweden)

D. V. Antonov

2015-01-01

Full Text Available In the article is provided the review of tools used in new type object DBMS for increasing the efficiency of access to data. Described object DIM DBMS features based on the use of the classes of objects relations as objects sets (inheritance, inclusion, interaction and history and objects relations (inheritance, internal inheritance, inclusion, internal inclusion, interaction and history. The description of subject domain is entered by means of an object and dynamic data model (OD-model, and DIM DBMS completeness for any OD-model is justified. ODQL object query language allowing to combine the exact description complexity with the simplicity of use due to two query levels introduction is described. For the elucidation of the most effective way of the appeal to DIM DBMS the study of various query technologies for this environment is conducted, and mechanisms for users work with it are developed and realized. For this purpose a software complex necessary for work with DIM DBMS is developed. The description of the "DIM Navigator" main software development concepts, necessary for data manipulation opportunity in the available DB by means of the graphic interface is provided. Software development "The Generator of ODQL-queries" is considered which is necessary for simplification of query creation to DIM DBMS, needlessly for the user to know the syntax of a modern query language. Problems of converting data from the existing DBMS in DIM DBMS are considered.The article is published in the author’s wording

Verifying Real-Time Systems using Explicit-time Description Methods

Directory of Open Access Journals (Sweden)

Hao Wang

2009-12-01

Full Text Available Timed model checking has been extensively researched in recent years. Many new formalisms with time extensions and tools based on them have been presented. On the other hand, Explicit-Time Description Methods aim to verify real-time systems with general untimed model checkers. Lamport presented an explicit-time description method using a clock-ticking process (Tick to simulate the passage of time together with a group of global variables for time requirements. This paper proposes a new explicit-time description method with no reliance on global variables. Instead, it uses rendezvous synchronization steps between the Tick process and each system process to simulate time. This new method achieves better modularity and facilitates usage of more complex timing constraints. The two explicit-time description methods are implemented in DIVINE, a well-known distributed-memory model checker. Preliminary experiment results show that our new method, with better modularity, is comparable to Lamport's method with respect to time and memory efficiency.

The Description of Problems Relating to Analogies Used in Science and Technology Textbooks

Directory of Open Access Journals (Sweden)

Rahmi YAĞBASAN

2008-01-01

Full Text Available The aim of this study was to determine the problems concerning the use of analogies ingeneral and analogies used in primary school science and technology lessons inparticular. In this study, descriptive method was used. 4th, 5th, and 8th classes Scienceand Technology course books; 7 th, 8 th classes Science Books were used as a source.Analogies in the course books were classified according to the literature and theproblems found related to the analogies are pointed out in the study. In this study itwas seen that eighty-nine analogies were used in Science and Technology and inScience course books. These analogies were used in descending order as 8, 4, 6, 7, 5class groups. Also it was seen that these analogies were generally at simple andpictorial analogies.

Efficiency of Picture Description and Storytelling Methods in Language Sampling According to the Mean Length of Utterance Index

Directory of Open Access Journals (Sweden)

Salime Jafari

2012-10-01

Full Text Available Background and Aim: Due to limitation of standardized tests for Persian-speakers with language disorders, spontaneous language sampling collection is an important part of assessment of languageprotocol. Therefore, selection of a language sampling method, which will provide information of linguistic competence in a short time, is important. Therefore, in this study, we compared the languagesamples elicited with picture description and storytelling methods in order to determine the effectiveness of the two methods.Methods: In this study 30 first-grade elementary school girls were selected with simple sampling. To investigate picture description method, we used two illustrated stories with four pictures. Languagesamples were collected through storytelling by telling a famous children’s story. To determine the effectiveness of these two methods the two indices of duration of sampling and mean length ofutterance (MLU were compared.Results: There was no significant difference between MLU in description and storytelling methods(p>0.05. However, duration of sampling was shorter in the picture description method than the storytelling method (p<0.05.Conclusion: Findings show that, the two methods of picture description and storytelling have the same potential in language sampling. Since, picture description method can provide language samples with the same complexity in a shorter time than storytelling, it can be used as a beneficial method forclinical purposes.

Evaluating the Environmental Dimension of Material Efficiency Strategies Relating to the Circular Economy

Directory of Open Access Journals (Sweden)

Stuart Walker

2018-03-01

Full Text Available Material efficiency is a key element of new thinking to address the challenges of reducing impacts on the environment and of resource scarcity, whilst at the same time meeting service and functionality demands on materials. Directly related to material efficiency is the concept of the Circular Economy, which is based on the principle of optimising the utility embodied in materials and products through the life-cycle. Although materials such as steel, on account of high recycling rates at end-of-life, are amongst the most ‘circular’ of manufactured materials, significant opportunities for greater material efficiency exist, which are yet to be widely implemented. Life Cycle Assessment (LCA is commonly used to assess the environmental benefits of recovering and recycling materials through the manufacturing supply chain and at end-of-life. Using an example taken from renewable energy generation, this paper explores the correlation between product circularity and the environmental case for strategies designed to improve material efficiency. An LCA-based methodology for accounting for the recovery and reuse of materials from the supply chain and at end-of-life is used as the basis for calculating the carbon footprint benefits of five material efficiency scenarios. The results are compared with a number of proposed material circularity indicators. Two conclusions from this exercise are that (i LCA methodologies based around end-of-life approaches are well placed for quantifying the environmental benefits of material efficiency and circular economy strategies and (ii when applying indicators relating to the circularity of materials these should also be supported by LCA-based studies.

An Efficient Inductive Genetic Learning Algorithm for Fuzzy Relational Rules

Directory of Open Access Journals (Sweden)

Antonio

2012-04-01

Full Text Available Fuzzy modelling research has traditionally focused on certain types of fuzzy rules. However, the use of alternative rule models could improve the ability of fuzzy systems to represent a specific problem. In this proposal, an extended fuzzy rule model, that can include relations between variables in the antecedent of rules is presented. Furthermore, a learning algorithm based on the iterative genetic approach which is able to represent the knowledge using this model is proposed as well. On the other hand, potential relations among initial variables imply an exponential growth in the feasible rule search space. Consequently, two filters for detecting relevant potential relations are added to the learning algorithm. These filters allows to decrease the search space complexity and increase the algorithm efficiency. Finally, we also present an experimental study to demonstrate the benefits of using fuzzy relational rules.

Relative efficiency within a tax administration: The effects of result improvement

Directory of Open Access Journals (Sweden)

Elena Villar Rubio

2017-03-01

Full Text Available This paper analyses the Spanish tax administration, evaluating the relative efficiency of each of the regional offices that are its constituent parts via output-oriented two-stage data envelopment analysis. In the study, a total of 47 regional offices were analysed, considering three inputs: 1 current expenditure in goods and services; 2 number of tax returns processed in terms of the two main direct taxes; and, 3 personnel numbers. Revenue resulting from tax assessments was considered as output. The analysis shows that the efficient action of regional offices might have increased by 21.6% the results of the management of this administration.

A Modal Description of Multiport Antennas

Directory of Open Access Journals (Sweden)

Jonathan J. Lynch

2011-01-01

Full Text Available This paper presents a modal description of multiport antennas that leads directly to a rigorous network representation and simple quadratic expressions for gain, efficiency, and effective area. The analysis shows that the transmitting and receiving properties of an element antenna array are exactly described by a 2×2 element scattering matrix together with a set of orthonormal mode functions and accounts for effects such as mutual coupling, scattering, reflection, and losses. The approach is quite general, only requiring that the antenna be finite and reciprocal. The scattering network description simplifies accounting of power flow while retaining a close connection to the physical antenna characteristics. The orthonormal mode functions provide a complete basis for radiated and received fields, facilitating beamforming. The theory provides rigorous definitions of input-output signals and links them to the underlying electromagnetics in a straightforward manner.

Identifying heat-related deaths by using medical examiner and vital statistics data: Surveillance analysis and descriptive epidemiology - Oklahoma, 1990-2011.

Science.gov (United States)

Johnson, Matthew G; Brown, Sheryll; Archer, Pam; Wendelboe, Aaron; Magzamen, Sheryl; Bradley, Kristy K

2016-10-01

Approximately 660 deaths occur annually in the United States associated with excess natural heat. A record heat wave in Oklahoma during 2011 generated increased interest concerning heat-related mortality among public health preparedness partners. We aimed to improve surveillance for heat-related mortality and better characterize heat-related deaths in Oklahoma during 1990-2011, and to enhance public health messaging during future heat emergencies. Heat-related deaths were identified by querying vital statistics (VS) and medical examiner (ME) data during 1990-2011. Case inclusion criteria were developed by using heat-related International Classification of Diseases codes, cause-of-death nomenclature, and ME investigation narrative. We calculated sensitivity and predictive value positive (PVP) for heat-related mortality surveillance by using VS and ME data and performed a descriptive analysis. During the study period, 364 confirmed and probable heat-related deaths were identified when utilizing both data sets. ME reports had 87% sensitivity and 74% PVP; VS reports had 80% sensitivity and 52% PVP. Compared to Oklahoma's general population, decedents were disproportionately male (67% vs. 49%), aged ≥65 years (46% vs. 14%), and unmarried (78% vs. 47%). Higher rates of heat-related mortality were observed among Blacks. Of 95 decedents with available information, 91 (96%) did not use air conditioning. Linking ME and VS data sources together and using narrative description for case classification allows for improved case ascertainment and surveillance data quality. Males, Blacks, persons aged ≥65 years, unmarried persons, and those without air conditioning carry a disproportionate burden of the heat-related deaths in Oklahoma. Published by Elsevier Inc.

The Impact of Job Satisfaction and Employee Education on Employee Efficiency

Directory of Open Access Journals (Sweden)

M. M. C. De Silva

2014-10-01

Full Text Available Against a backdrop of continuing discussion on the challenges faced by the apparel industry in Sri Lanka, the human involvement is yet to be considered as a significant organizational element. Therefore this study empirically examined the impact of job satisfaction and employee education on employee efficiency in the apparel industry with reference to the Gampaha district. The study was aimed to examine the problem “Is there an impact of job satisfaction and employee education on employee efficiency?”This study was conducted from a randomly selected sample of 90 respondents from an Apparel organization by administrating a structured questionnaire, which consisted of 37 questions that featured a 6 point scale. The sample of the study only consisted of machine operators. For the purpose of analyzing both descriptive and dummy variables regression was used. Descriptive analysis was used to clarify the basic features of the sample. In order to examine the relationship employee efficiency has with job satisfaction and employee education, an ANOVA model was constructed. The constructed ANOVA model for the study is as follows. EF = â0+ â1D1 + â2D2 +â3D3 + U The findings of the research revealed that there was no positive relationship between employee efficiency, job satisfaction and education and it was statistically confirmed by rejecting the two hypotheses. According to the study, the researcher observed that employee efficiency neither relates to employee job satisfaction nor the level of education of employees since they work to achieve their day to day targets.

The Efficiency of Infants' Exploratory Play Is Related to Longer-Term Cognitive Development

Science.gov (United States)

Muentener, Paul; Herrig, Elise; Schulz, Laura

2018-01-01

In this longitudinal study we examined the stability of exploratory play in infancy and its relation to cognitive development in early childhood. We assessed infants' (N = 130, mean age at enrollment = 12.02 months, SD = 3.5 months; range: 5–19 months) exploratory play four times over 9 months. Exploratory play was indexed by infants' attention to novelty, inductive generalizations, efficiency of exploration, face preferences, and imitative learning. We assessed cognitive development at the fourth visit for the full sample, and again at age three for a subset of the sample (n = 38). The only measure that was stable over infancy was the efficiency of exploration. Additionally, infants' efficiency score predicted vocabulary size and distinguished at-risk infants recruited from early intervention sites from those not at risk. Follow-up analyses at age three provided additional evidence for the importance of the efficiency measure: more efficient exploration was correlated with higher IQ scores. These results suggest that the efficiency of infants' exploratory play can be informative about longer-term cognitive development. PMID:29904360

48 CFR 952.223 - Clauses related to environment, energy and water efficiency, renewable energy technologies...

Science.gov (United States)

2010-10-01

... environment, energy and water efficiency, renewable energy technologies, occupational safety, and drug-free workplace. 952.223 Section 952.223 Federal Acquisition Regulations System DEPARTMENT OF ENERGY CLAUSES AND... related to environment, energy and water efficiency, renewable energy technologies, occupational safety...

Relation of managerial efficiency and leadership styles – Empirical study in Hrvatska elektroprivreda d.d.

Directory of Open Access Journals (Sweden)

Damir Skansi

2000-01-01

Full Text Available The relation of the managerial efficiency and leadership styles are analysed in this paper. We conducted an empirical study in a Croatian power supply company (HEP. The dominant leadership style in HEP is consultational, which the organization, according to postulates of this research, brings closer to the top global companies, considering that the tendencies in leadership styles point to the need for a new generation of leaders which will be essentially different from the traditional manager. We have determined that there is a significant interdependence between leadership styles of HEP’s managers (measured using Likert’s method and the degree of management work efficiency (measured using the adjusted Mott’s technique; the closer the leadership style is to System 4, that is participational, the higher the managerial efficiency is. Also, we have found that there is no significant difference between lower and middle management in HEP, concerning the relation between leadership styles and efficiency. This means that both levels get better grades for its efficiency if they belong to a consultational and participational leadership style.

Drought effect on weaning weight and efficiency relative to cow size in semiarid rangeland.

Science.gov (United States)

Scasta, J D; Henderson, L; Smith, T

2015-12-01

Cow size has been suggested to be an important consideration for selecting cattle to match their production environment. Over the last several decades, the trend in genetic selection for maximum growth has led to gradual increases in beef cow size. An unrelated trend during this same period in the western United States has been an increase in temperature, drought frequency, and drought severity. Due to the potential influence of the increasing cow size trend on nutritional maintenance costs and production, we assessed the effect of cow size on weaning weight and efficiency in relation to drought on a semiarid high-elevation ranch in Wyoming. This study addresses a lack of empirical studies on the interaction between cow size and drought. We measured calf weaning weights of 80 Angus × Gelbvieh cows from 2011 to 2014 and assessed how drought affected weaning weights, efficiency (considered as calf weight relative to cow weight), intake requirements, and potential herd sizes relative to cow size. We stratified cows into 5 weight classes (453, 498, 544, 589, and 634 kg) as a proxy for cow size and adjusted weaning weights to a 210-d calf sex adjusted value. Cow size was a significant factor every year, with different cow sizes having advantages or disadvantages different years relative to weaning weight. However, efficiency for the smallest cows (453 kg) was always greater than efficiency for largest cows (634 kg; cows was greater in the driest year (0.41 ± 0.02) than efficiency of the largest cows in the wettest years (0.37 ± 0.01). The change in efficiency (ΔE) between wet and dry years was 0.18 for the smallest cow size and 0.02 for the largest cow size, and ΔE decreased as cow size increased. This is an indication of the ability of smaller cows to lower maintenance requirements in response to changes in the production environment but with optimal upside potential when conditions are favorable. These results indicate large cows (589 to 634 kg) do not maximize

Transfer Efficiency of Bacteria and Viruses from Porous and Nonporous Fomites to Fingers under Different Relative Humidity Conditions

Science.gov (United States)

Gerba, Charles P.; Tamimi, Akrum H.; Kitajima, Masaaki; Maxwell, Sheri L.; Rose, Joan B.

2013-01-01

Fomites can serve as routes of transmission for both enteric and respiratory pathogens. The present study examined the effect of low and high relative humidity on fomite-to-finger transfer efficiency of five model organisms from several common inanimate surfaces (fomites). Nine fomites representing porous and nonporous surfaces of different compositions were studied. Escherichia coli, Staphylococcus aureus, Bacillus thuringiensis, MS2 coliphage, and poliovirus 1 were placed on fomites in 10-μl drops and allowed to dry for 30 min under low (15% to 32%) or high (40% to 65%) relative humidity. Fomite-to-finger transfers were performed using 1.0 kg/cm2 of pressure for 10 s. Transfer efficiencies were greater under high relative humidity for both porous and nonporous surfaces. Most organisms on average had greater transfer efficiencies under high relative humidity than under low relative humidity. Nonporous surfaces had a greater transfer efficiency (up to 57%) than porous surfaces (humidity, as well as under high relative humidity (nonporous, up to 79.5%; porous, <13.4%). Transfer efficiency also varied with fomite material and organism type. The data generated can be used in quantitative microbial risk assessment models to assess the risk of infection from fomite-transmitted human pathogens and the relative levels of exposure to different types of fomites and microorganisms. PMID:23851098

The relative efficiency of Iranian's rural traffic police: a three-stage DEA model.

Science.gov (United States)

Rahimi, Habibollah; Soori, Hamid; Nazari, Seyed Saeed Hashemi; Motevalian, Seyed Abbas; Azar, Adel; Momeni, Eskandar; Javartani, Mehdi

2017-10-13

Road traffic Injuries (RTIs) as a health problem imposes governments to implement different interventions. Target achievement in this issue required effective and efficient measures. Efficiency evaluation of traffic police as one of the responsible administrators is necessary for resource management. Therefore, this study conducted to measure Iran's rural traffic police efficiency. This was an ecological study. To obtain pure efficiency score, three-stage DEA model was conducted with seven inputs and three output variables. At the first stage, crude efficiency score was measured with BCC-O model. Next, to extract the effects of socioeconomic, demographic, traffic count and road infrastructure as the environmental variables and statistical noise, the Stochastic Frontier Analysis (SFA) model was applied and the output values were modified according to similar environment and statistical noise conditions. Then, the pure efficiency score was measured using modified outputs and BCC-O model. In total, the efficiency score of 198 police stations from 24 provinces of 31 provinces were measured. The annual means (standard deviation) of damage, injury and fatal accidents were 247.7 (258.4), 184.9 (176.9), and 28.7 (19.5), respectively. Input averages were 5.9 (3.0) patrol teams, 0.5% (0.2) manpower proportions, 7.5 (2.9) patrol cars, 0.5 (1.3) motorcycles, 77,279.1 (46,794.7) penalties, 90.9 (2.8) cultural and educational activity score, 0.7 (2.4) speed cameras. The SFA model showed non-significant differences between police station performances and the most differences attributed to the environmental and random error. One-way main road, by road, traffic count and the number of household owning motorcycle had significant positive relations with inefficiency score. The length of freeway/highway and literacy rate variables had negative relations, significantly. Pure efficiency score was with mean of 0.95 and SD of 0.09. Iran's traffic police has potential opportunity to reduce

The relation between energy efficiency and other general objectives from a socioeconomic perspective

International Nuclear Information System (INIS)

Ankarhem, Mattias; Braennlund, Runar

2006-09-01

An important question in the analysis of energy efficiency programs and their consequences is: How are objectives and instruments defined? E.g. if the objective is reduced carbon dioxide emissions and energy efficiency is the means to reach the objective, then it is not certain that increased energy efficiency will give the result as expected (1). Furthermore, energy efficiency measures will probably be an inefficient way of reaching the goal (2). (1) due to the rebound effects, and (2) since the measures are applied indiscriminately, energy use with only weak couplings to the objective are also affected. Energy efficiency is a partial and relative measure, and does not give much information studied in isolation. It should rather be studied from the perspective of total resource efficiency. Economic policy ought to have the goal of securing a socioeconomic exploitation of all resources (of which energy is one). An instrument working in this direction is internalizing of external effects e.g. through environmental taxes, so that the prices reflect the socioeconomic costs for using the resources. Early foreign studies indicates that a rebound effect exists, usually, however, the technological efficiency potentials can be realized. In a recent study of Swedish conditions, the rebound effect seems to be important. It totally negates the initial effect, at in the end the emissions have increased compared to the starting point. The results show the energy efficiency measures can be in direct conflict with climate and other environmental objectives.

User-oriented Understanding of Descriptive, Proscriptive and Prescriptive Lexicography

DEFF Research Database (Denmark)

Bergenholtz, Henning

2003-01-01

There is much uncertainty and confusion as to the real differences between prescrip-tive and descriptive dictionaries. In general, the majority of existing accounts can be summarised as follows: Descriptive relates to the empirical basis; accordance between the empirical data and the dictionary...... consistent terminology is suggested which allows for both the function of the dictionary and the relation of the dictionary to the empirical basis....

Is there Need for more Transparency and Efficiency in Cause-related Marketing?

Directory of Open Access Journals (Sweden)

Nina Langen

2011-02-01

Full Text Available The popularity of ethical consumption increases. This has motivated firms to increasingly implement Cause-related Marketing (CrM campaigns in Germany. But research reveals that especially German consumers are sceptic with regard to the amount of money spent for the good ‘cause’ by the enterprises. This can be explained by the small share of information provided by CrM campaigns to consumers. In consequence, this can reduce consumers’ willingness to purchase CrM products. Therefore, this study analyses whether the efficiency and transparency of a CrM campaign are important for consumers. The share of money reaching the cause relative to the product price consumers’ pay is taken as a proxy for efficiency while transparency is understood as the open communication of donated amounts on the product by label. A consumer survey conducted in Germany in 2009 reveals that consumers have a great interest in the transparency of a CrM campaign. Furthermore, the study gives evidence that there is a gap between the levels of expected and requested efficiency of CrM donations. Consequently, firms should label the donation amount to meet consumers’ transparency needs. Furthermore, to create a successful CrM campaign companies also have to consider that the amount of money devoted to the good cause is of relevance for consumers.

Discovering subgroups using descriptive models of adverse outcomes in medical care.

Science.gov (United States)

Stiglic, Gregor; Kokol, P

2012-01-01

Hospital discharge databases store hundreds of thousands of patients. These datasets are usually used by health insurance companies to process claims from hospitals, but they also represent a rich source of information about the patterns of medical care. The proposed subgroup discovery method aims to improve the efficiency of detecting interpretable subgroups in data. Supervised descriptive rule discovery techniques can prove inefficient in cases when target class samples represent only an extremely small amount of all available samples. Our approach aims to balance the number of samples in target and control groups prior to subgroup discovery process. Additionally, we introduce some improvements to an existing subgroup discovery algorithm enhancing the user experience and making the descriptive data mining process and visualization of rules more user friendly. Instance-based subspace subgroup discovery introduced in this paper is demonstrated on hospital discharge data with focus on medical errors. In general, the number of patients with a recorded diagnosis related to a medical error is relatively small in comparison to patients where medical errors did not occur. The ability to produce comprehensible and simple models with high degree of confidence, support, and predictive power using the proposed method is demonstrated. This paper introduces a subspace subgroup discovery process that can be applied in all settings where a large number of samples with relatively small number of target class samples are present. The proposed method is implemented in Weka machine learning environment and is available at http://ri.fzv.uni-mb.si/ssd.

Descriptive Research

DEFF Research Database (Denmark)

Wigram, Anthony Lewis

2003-01-01

Descriptive research is described by Lathom-Radocy and Radocy (1995) to include Survey research, ex post facto research, case studies and developmental studies. Descriptive research also includes a review of the literature in order to provide both quantitative and qualitative evidence of the effect...... starts will allow effect size calculations to be made in order to evaluate effect over time. Given the difficulties in undertaking controlled experimental studies in the creative arts therapies, descriptive research methods offer a way of quantifying effect through descriptive statistical analysis...

Embedding as a description of the relation between macro- and microphysics

International Nuclear Information System (INIS)

Ludwig, G.

1986-01-01

An attempt is made to investigate the interaction among macrosystems starting with a foundation. The foundation starts here with a description of macrosystems by trajectories in state spaces. A preparation procedure is described as a procedure to set up an experiment so that the trajectories may take their course. Repeating the experiment very often allows one to measure the probabilities for various trajectories

Measuring the relative efficiencies of automated telling machines and point of sales

Directory of Open Access Journals (Sweden)

Sara Farajzadeh

2015-11-01

Full Text Available During the past few years, many people have been interested in purchasing goods and services via point of sales (POS. They have also wished to pay their bills, withdraw cash or transfer funds using automated telling machines (ATMs. These two facilities help banks’ customers carry less amount of cash and do their daily banking activities any time even when the banks are closed. This paper presents an empirical investigation to measure the relative efficiency of nearly 600 POS and ATM units associated with Bank Melli Iran located in city of Tehran, Iran. Using data envelopment analysis, the study has disclosed that only small portions of POS and ATM are working efficiently.

Graphic Description: The Mystery of Ibn Khafaja\\'s Success in Description

Directory of Open Access Journals (Sweden)

جواد رنجبر

2009-12-01

Full Text Available Graphic Description:   The Mystery of Ibn Khafaja's Success in Description    Ali Bagher Taheriniya *  Javad Ranjbar **      Abstract Ibn Khafaja is one of the poets and men of letters in Spain. He is titled to Sanobari of Spain. He is one of the masters of description. Hence, the analysis of successful techniques he has used in the descriptive art could illuminate the way for others. Al-Taswir al-harfi (graphic description is a term which denotes the highest and most detailed poems. On this basis, the best descriptive poem is one which is closer to a painting. He has used some elements called conforming elements of description which contain: imagination, feeling, faculty, and dialogue as well as three other elements: to be inborn in description, enchanting nature and convenient life. This article is going to give an analysis of the reasons for Ibn Khafaja’s success in description and portrait making.   Key words: Ibn Khafaja, poetry, description, portrait   * Associate Professor, Bu Ali Sina University of Hamadan E-mail: bTaheriniya@yahoo.com  ** M.A. in Arabic Language and Literature

Employing Picture Description to Assess the Students' Descriptive Paragraph Writing

Directory of Open Access Journals (Sweden)

Ida Ayu Mega Cahyani

2018-03-01

Full Text Available Writing is considered as an important skill in learning process which is needed to be mastered by the students. However, in teaching learning process at schools or universities, the assessment of writing skill is not becoming the focus of learning process and the assessment is administered inappropriately. In this present study, the researcher undertook the study which dealt with assessing descriptive paragraph writing ability of the students through picture description by employing an ex post facto as the research design. The present study was intended to answer the research problem dealing with the extent of the students’ achievement of descriptive paragraph writing ability which is assessed through picture description. The samples under the study were 40 students determined by means of random sampling technique with lottery system. The data were collected through administering picture description as the research instrument. The obtained data were analyzed by using norm-reference measure of five standard values. The results of the data analysis showed that there were 67.50% samples of the study were successful in writing descriptive paragraph, while there were 32.50% samples were unsuccessful in writing descriptive paragraph which was assessed by administering picture description test

Relativeness in quantum gravity: limitations and frame dependence of semiclassical descriptions

International Nuclear Information System (INIS)

Nomura, Yasunori; Sanches, Fabio; Weinberg, Sean J.

2015-01-01

Consistency between quantum mechanical and general relativistic views of the world is a longstanding problem, which becomes particularly prominent in black hole physics. We develop a coherent picture addressing this issue by studying the quantum mechanics of an evolving black hole. After interpreting the Bekenstein-Hawking entropy as the entropy representing the degrees of freedom that are coarse-grained to obtain a semiclassical description from the microscopic theory of quantum gravity, we discuss the properties these degrees of freedom exhibit when viewed from the semiclassical standpoint. We are led to the conclusion that they show features which we call extreme relativeness and spacetime-matter duality — a nontrivial reference frame dependence of their spacetime distribution and the dual roles they play as the “constituents” of spacetime and as thermal radiation. We describe black hole formation and evaporation processes in distant and infalling reference frames, showing that these two properties allow us to avoid the arguments for firewalls and to make the existence of the black hole interior consistent with unitary evolution in the sense of complementarity. Our analysis provides a concrete answer to how information can be preserved at the quantum level throughout the evolution of a black hole, and gives a basic picture of how general coordinate transformations may work at the level of full quantum gravity beyond the approximation of semiclassical theory.

Energie Efficiency Directive. Article 7. Dutch implementation; Energie Efficiency Directive. Artikel 7. Nederlandse invulling

Energy Technology Data Exchange (ETDEWEB)

Daniels, B.; Gerdes, J.; Boonekamp, P.; Kroon, P.; Stutvoet-Mulder, K.; Tigchelaar, C.; Wetzels, W. [ECN Beleidsstudies, Petten (Netherlands)

2013-12-15

Article 7 of the recently adopted Energy Efficiency Directive (EED) obliges the EU member states to achieve 1.5% yearly efficiency improvements during the period 2014-2020, culminating in a cumulative savings target. This report describes the way the Netherlands intends to meet the article 7 obligations, as requested by the European Commission. The EED offers the member states various degrees of freedom with regard to the definition of the target and the way it is met. Hence, this report addresses the choices of the Netherlands and their consequences for the Dutch target and the realised energy savings. A broad-lined description of the choices and overall results is complemented by extensive annexes that offer technical descriptions and detailed numbers [Dutch] Dit rapport beschrijft de manier waarop Nederland aan haar doelstelling voor artikel 7 van de Energy Efficiency Directive (EED) denkt te voldoen. Het is gebaseerd op de interpretaties en keuzes die de Nederlandse overheid heeft gemaakt. Artikel 7 van de Energy Efficiency Directive verplicht Nederland tot het realiseren van een efficiencyverbetering van 1,5% per jaar in de periode 2014-2020, als cumulatieve doelstelling. Voor Nederland betekent dit - rekening houdend met de vrijheidsgraden van de EED - een doelstelling van minimaal 482 PJ besparing op het finaal energiegebruik. Nederland verwacht een cumulatieve besparing te bereiken tussen de 387 en 562 PJ in finale termen, waarvan 87 tot 186 PJ door nieuw beleid. Dit nieuwe beleid bestaat uit de overeengekomen beleidsmaatregelen uit het recente Energieakkoord dat onder regie van de Sociaal Economische Raad (SER) is gesloten. Het kabinet heeft dit akkoord mede ondertekend.

Tax and Fiscal Policies for Promotion of Industrial EnergyEfficiency: A Survey of International Experience

Energy Technology Data Exchange (ETDEWEB)

Price, Lynn; Galitsky, Christina; Sinton, Jonathan; Worrell,Ernst; Graus, Wina

2005-09-15

The Energy Foundation's China Sustainable Energy Program (CSEP) has undertaken a major project investigating fiscal and tax policy options for stimulating energy efficiency and renewable energy development in China. This report, which is part of the sectoral sub-project studies on energy efficiency in industry, surveys international experience with tax and fiscal policies directed toward increasing investments in energy efficiency in the industrial sector. The report begins with an overview of tax and fiscal policies, including descriptions and evaluations of programs that use energy or energy-related carbon dioxide (CO2) taxes, pollution levies, public benefit charges, grants or subsidies, subsidized audits, loans, tax relief for specific technologies, and tax relief as part of an energy or greenhouse gas (GHG) emission tax or agreement scheme. Following the discussion of these individual policies, the report reviews experience with integrated programs found in two countries as well as with GHG emissions trading programs. The report concludes with a discussion of the best practices related to international experience with tax and fiscal policies to encourage investment in energy efficiency in industry.

Least square methods and covariance matrix applied to the relative efficiency calibration of a Ge(Li) detector

International Nuclear Information System (INIS)

Geraldo, L.P.; Smith, D.L.

1989-01-01

The methodology of covariance matrix and square methods have been applied in the relative efficiency calibration for a Ge(Li) detector apllied in the relative efficiency calibration for a Ge(Li) detector. Procedures employed to generate, manipulate and test covariance matrices which serve to properly represent uncertainties of experimental data are discussed. Calibration data fitting using least square methods has been performed for a particular experimental data set. (author) [pt

The relation between energy efficiency and general objectives

International Nuclear Information System (INIS)

Holmberg, John; Naessen, Jonas; Sprei, Frances

2006-09-01

Three overall objectives for energy efficiency programs are discussed: Reduction of negative externalities, esp. climatic change; Phase-out of nuclear power while limiting electricity imports; and creating welfare gains by correcting market failures of energy efficiency programs (rebound effects)

The identity of Albuca caudata Jacq. (Hyacinthaceae and a description of a new related species: A. bakeri

Directory of Open Access Journals (Sweden)

Mario Martínez-Azorín

2011-07-01

Full Text Available The name Albuca caudata Jacq. has been widely misunderstood or even ignored since its description in 1791. After studying herbarium specimens and living populations in South Africa, plants fitting Jacquin´s concept of that species are found to be widely distributed in the Eastern Cape, mainly in the Albany centre of Endemism. Furthermore, some divergent specimens matching Baker´s concept of A. caudata are described as a new related species: A. bakeri. Data on typification, morphology, ecology, and distribution are reported for both taxa. Affinities and divergences with other close allies are also discussed.

Energy Efficiency Improvement and Cost Saving Oportunities for the Concrete Industry

Energy Technology Data Exchange (ETDEWEB)

Kermeli, Katerina; Worrell, Ernst; Masanet, Eric

2011-12-01

The U.S. concrete industry is the main consumer of U.S.-produced cement. The manufacturing of ready mixed concrete accounts for more than 75% of the U.S. concrete production following the manufacturing of precast concrete and masonry units. The most significant expenditure is the cost of materials accounting for more than 50% of total concrete production costs - cement only accounts for nearly 24%. In 2009, energy costs of the U.S. concrete industry were over $610 million. Hence, energy efficiency improvements along with efficient use of materials without negatively affecting product quality and yield, especially in times of increased fuel and material costs, can significantly reduce production costs and increase competitiveness. The Energy Guide starts with an overview of the U.S. concrete industry’s structure and energy use, a description of the various manufacturing processes, and identification of the major energy consuming areas in the different industry segments. This is followed by a description of general and process related energy- and cost-efficiency measures applicable to the concrete industry. Specific energy and cost savings and a typical payback period are included based on literature and case studies, when available. The Energy Guide intends to provide information on cost reduction opportunities to energy and plant managers in the U.S. concrete industry. Every cost saving opportunity should be assessed carefully prior to implementation in individual plants, as the economics and the potential energy and material savings may differ.

Distinguishing Features and Similarities Between Descriptive Phenomenological and Qualitative Description Research.

Science.gov (United States)

Willis, Danny G; Sullivan-Bolyai, Susan; Knafl, Kathleen; Cohen, Marlene Z

2016-09-01

Scholars who research phenomena of concern to the discipline of nursing are challenged with making wise choices about different qualitative research approaches. Ultimately, they want to choose an approach that is best suited to answer their research questions. Such choices are predicated on having made distinctions between qualitative methodology, methods, and analytic frames. In this article, we distinguish two qualitative research approaches widely used for descriptive studies: descriptive phenomenological and qualitative description. Providing a clear basis that highlights the distinguishing features and similarities between descriptive phenomenological and qualitative description research will help students and researchers make more informed choices in deciding upon the most appropriate methodology in qualitative research. We orient the reader to distinguishing features and similarities associated with each approach and the kinds of research questions descriptive phenomenological and qualitative description research address. © The Author(s) 2016.

Energy efficiency in France (1990-2000). Report based on the ODYSSEE data base on energy efficiency indicators and the MURE data base on energy efficiency policy measures with the support from SAVE

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-04-01

This report presents an analysis of energy efficiency trends in France on the basis of energy efficiency indicators extracted from the Odyssee data base, maintained and updated in the framework of the SAVE program. This analysis focuses on the period 1990-2000. It also examines the policies and measures implemented in the field of energy efficiency, with a focus on the years 2000-2001. The full list and description of the policy measures are presented in detail in an annex. They are extracted from the MURE data base updated within the SAVE program. (author)

Epsilon. A System Description Language

DEFF Research Database (Denmark)

Jensen, Kurt; Kyng, Morten

This paper discusses the use of Petri nets as a semantic tool in the design of languages and in the construction and analysis of system descriptions. The topics treated are: -- Languages based on nets. -- The problem of time in nets. -- Nets and related models. -- Nets and formal semantics...

Feedback produces divergence from prospect theory in descriptive choice.

Science.gov (United States)

Jessup, Ryan K; Bishara, Anthony J; Busemeyer, Jerome R

2008-10-01

A recent study demonstrated that individuals making experience-based choices underweight small probabilities, in contrast to the overweighting observed in a typical descriptive paradigm. We tested whether trial-by-trial feedback in a repeated descriptive paradigm would engender choices more correspondent with experiential or descriptive paradigms. The results of a repeated gambling task indicated that individuals receiving feedback underweighted small probabilities, relative to their no-feedback counterparts. These results implicate feedback as a critical component during the decision-making process, even in the presence of fully specified descriptive information. A model comparison at the individual-subject level suggested that feedback drove individuals' decision weights toward objective probability weighting.

49 CFR 663.33 - Description of post-delivery audit.

Science.gov (United States)

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Description of post-delivery audit. 663.33 Section 663.33 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PRE-AWARD AND POST-DELIVERY AUDITS OF ROLLING STOCK PURCHASES Post-Delivery Audits § 663.33 Description of...

Development of efficient time-evolution method based on three-term recurrence relation

International Nuclear Information System (INIS)

Akama, Tomoko; Kobayashi, Osamu; Nanbu, Shinkoh

2015-01-01

The advantage of the real-time (RT) propagation method is a direct solution of the time-dependent Schrödinger equation which describes frequency properties as well as all dynamics of a molecular system composed of electrons and nuclei in quantum physics and chemistry. Its applications have been limited by computational feasibility, as the evaluation of the time-evolution operator is computationally demanding. In this article, a new efficient time-evolution method based on the three-term recurrence relation (3TRR) was proposed to reduce the time-consuming numerical procedure. The basic formula of this approach was derived by introducing a transformation of the operator using the arcsine function. Since this operator transformation causes transformation of time, we derived the relation between original and transformed time. The formula was adapted to assess the performance of the RT time-dependent Hartree-Fock (RT-TDHF) method and the time-dependent density functional theory. Compared to the commonly used fourth-order Runge-Kutta method, our new approach decreased computational time of the RT-TDHF calculation by about factor of four, showing the 3TRR formula to be an efficient time-evolution method for reducing computational cost

NONLINEAR MODELS FOR DESCRIPTION OF CACAO FRUIT GROWTH WITH ASSUMPTION VIOLATIONS

Directory of Open Access Journals (Sweden)

JOEL AUGUSTO MUNIZ

2017-01-01

Full Text Available Cacao (Theobroma cacao L. is an important fruit in the Brazilian economy, which is mainly cultivated in the southern State of Bahia. The optimal stage for harvesting is a major factor for fruit quality and the knowledge on its growth curves can help, especially in identifying the ideal maturation stage for harvesting. Nonlinear regression models have been widely used for description of growth curves. However, several studies in this subject do not consider the residual analysis, the existence of a possible dependence between longitudinal observations, or the sample variance heterogeneity, compromising the modeling quality. The objective of this work was to compare the fit of nonlinear regression models, considering residual analysis and assumption violations, in the description of the cacao (clone Sial-105 fruit growth. The data evaluated were extracted from Brito and Silva (1983, who conducted the experiment in the Cacao Research Center, Ilheus, State of Bahia. The variables fruit length, diameter and volume as a function of fruit age were studied. The use of weighting and incorporation of residual dependencies was efficient, since the modeling became more consistent, improving the model fit. Considering the first-order autoregressive structure, when needed, leads to significant reduction in the residual standard deviation, making the estimates more reliable. The Logistic model was the most efficient for the description of the cacao fruit growth.

[Description of contributing factors in adverse events related to patient safety and their preventability].

Science.gov (United States)

Guerra-García, María Mercedes; Campos-Rivas, Beatriz; Sanmarful-Schwarz, Alexandra; Vírseda-Sacristán, Alicia; Dorrego-López, M Aránzazu; Charle-Crespo, Ángeles

2017-11-25

To assess the extent of healthcare related adverse events (AEs), their effect on patients, and their seriousness. To analyse the factors leading to the development of AEs, their relationship with the damage caused, and their degree of preventability. Retrospective descriptive study. Porriño, Pontevedra, Spain, Primary Care Service, from January-2014 to April-2016. Reported AEs were entered into the Patient Safety Reporting and Learning System (SiNASP). The variables measured were: Near Incident (NI) an occurrence with no effect or harm on the patient; Adverse Event (AE) an occurrence that affects or harms a patient. The level of harm is classified as minimal, minor, moderate, critical, and catastrophic. Preventability was classified as little evidence of being preventable, 50% preventable, and sound evidence of being preventable. percentages and Chi-squared test for qualitative variables; P<.05 with SPSS.15. SiNASP. Ethical considerations: approved by the Research Ethics Committee (2016/344). There were 166 recorded AEs (50.6% in males, and 46.4% in women. The mean age was 60.80years). Almost two-thirds 62.7% of AEs affected the patient, with 45.8% causing minimal damage, while 2.4% caused critical damages. Healthcare professionals were a contributing factor in 71.7% of the AEs, with the trend showing that poor communication and lack of protocols were related to the damage caused. Degree of preventability: 96.4%. Most AEs affected the patient, and were related to medication, diagnostic tests, and laboratory errors. The level of harm was related to communication problems, lack of, or deficient, protocols and a poor safety culture. Copyright © 2017 Elsevier España, S.L.U. All rights reserved.

49 CFR 587.6 - General description.

Science.gov (United States)

2010-10-01

... Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) DEFORMABLE BARRIERS Side Impact Moving Deformable Barrier § 587.6 General description. (a) The moving deformable barrier consists of component parts and...

49 CFR 663.23 - Description of pre-award audit.

Science.gov (United States)

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Description of pre-award audit. 663.23 Section 663.23 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PRE-AWARD AND POST-DELIVERY AUDITS OF ROLLING STOCK PURCHASES Pre-Award Audits § 663.23 Description of pre-award...

Generating descriptive visual words and visual phrases for large-scale image applications.

Science.gov (United States)

Zhang, Shiliang; Tian, Qi; Hua, Gang; Huang, Qingming; Gao, Wen

2011-09-01

Bag-of-visual Words (BoWs) representation has been applied for various problems in the fields of multimedia and computer vision. The basic idea is to represent images as visual documents composed of repeatable and distinctive visual elements, which are comparable to the text words. Notwithstanding its great success and wide adoption, visual vocabulary created from single-image local descriptors is often shown to be not as effective as desired. In this paper, descriptive visual words (DVWs) and descriptive visual phrases (DVPs) are proposed as the visual correspondences to text words and phrases, where visual phrases refer to the frequently co-occurring visual word pairs. Since images are the carriers of visual objects and scenes, a descriptive visual element set can be composed by the visual words and their combinations which are effective in representing certain visual objects or scenes. Based on this idea, a general framework is proposed for generating DVWs and DVPs for image applications. In a large-scale image database containing 1506 object and scene categories, the visual words and visual word pairs descriptive to certain objects or scenes are identified and collected as the DVWs and DVPs. Experiments show that the DVWs and DVPs are informative and descriptive and, thus, are more comparable with the text words than the classic visual words. We apply the identified DVWs and DVPs in several applications including large-scale near-duplicated image retrieval, image search re-ranking, and object recognition. The combination of DVW and DVP performs better than the state of the art in large-scale near-duplicated image retrieval in terms of accuracy, efficiency and memory consumption. The proposed image search re-ranking algorithm: DWPRank outperforms the state-of-the-art algorithm by 12.4% in mean average precision and about 11 times faster in efficiency.

Mining skeletal phenotype descriptions from scientific literature.

Directory of Open Access Journals (Sweden)

Tudor Groza

Full Text Available Phenotype descriptions are important for our understanding of genetics, as they enable the computation and analysis of a varied range of issues related to the genetic and developmental bases of correlated characters. The literature contains a wealth of such phenotype descriptions, usually reported as free-text entries, similar to typical clinical summaries. In this paper, we focus on creating and making available an annotated corpus of skeletal phenotype descriptions. In addition, we present and evaluate a hybrid Machine Learning approach for mining phenotype descriptions from free text. Our hybrid approach uses an ensemble of four classifiers and experiments with several aggregation techniques. The best scoring technique achieves an F-1 score of 71.52%, which is close to the state-of-the-art in other domains, where training data exists in abundance. Finally, we discuss the influence of the features chosen for the model on the overall performance of the method.

SIO Ferromanganese Nodule Description file - IDOE Portion

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Scripps Institution of Oceanography compiled descriptions of sediment samples related to ferromanganese deposits, funded through the International Decade of...

49 CFR 587.13 - General description.

Science.gov (United States)

2010-10-01

... Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) DEFORMABLE BARRIERS Offset Deformable Barrier § 587.13 General description. The offset deformable barrier is comprised of two elements: a fixed rigid barrier and...

Thermodynamics of accuracy in kinetic proofreading: dissipation and efficiency trade-offs

International Nuclear Information System (INIS)

Rao, Riccardo; Peliti, Luca

2015-01-01

The high accuracy exhibited by biological information transcription processes is due to kinetic proofreading, i.e. by a mechanism which reduces the error rate of the information-handling process by driving it out of equilibrium. We provide a consistent thermodynamic description of enzyme-assisted assembly processes involving competing substrates, in a master equation framework. We introduce and evaluate a measure of the efficiency based on rigorous non-equilibrium inequalities. The performance of several proofreading models are thus analyzed and the related time, dissipation and efficiency versus error trade-offs exhibited for different discrimination regimes. We finally introduce and analyze in the same framework a simple model which takes into account correlations between consecutive enzyme-assisted assembly steps. This work highlights the relevance of the distinction between energetic and kinetic discrimination regimes in enzyme-substrate interactions. (paper)

Energy efficiency and urbanism: Guide for urbanism planning energetically efficiency; Eficiencia energetica y urbanismo: Guia del planeamiento urbanistico energeticamente eficiente

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-07-01

The present book summarizes the urbanism in the context of energy efficiency. the book has 4 chapters and 3 annexes: The energy in the context of substantiality, the soil planning, recommendations for the urbanism planning with substantiality criteria and small description URBE project.

The relative efficiency of market-based environmental policy instruments with imperfect compliance

OpenAIRE

Rousseau, Sandra; Proost, Stef

2004-01-01

This paper examines to what extent incomplete compliance of environmental regulation mitigates the distortions caused by pre-existing labour taxes. We study the relative cost efficiency of three market-based instruments: emission taxes, tradable permits and output taxes. In a first-best setting and given that monitoring and enforcement is costless, we find that the same utility levels can be reached with and without incomplete compliance. However, allowing for violations makes the policy i...

Resource Use Efficiency in Rice Production in Jere Local ...

African Journals Online (AJOL)

acer

Descriptive statistics and production function were used as analytical tools. The result ..... women's active participation in agriculture. The result also .... Poverty Reduction. Through the ... and the Efficiencies of India Farm Using. Panel Data ...

Experiences Related to Urinary Incontinence of Stroke Patients: A Qualitative Descriptive Study.

Science.gov (United States)

Arkan, Gulcihan; Beser, Ayse; Ozturk, Vesile

2018-02-01

Poststroke urinary incontinence is a common problem, with a prevalence ranging from 32% to 79%. Urinary incontinence after stroke has negative physiological, psychological, and economic effects, which lead to lifestyle changes for both patients and caregivers. Nurses play an important role in preventing and improving incontinence, understanding the experiences of individuals experiencing incontinence, providing healthcare for them, and implementing behavioral therapy methods. The aim of this study was to determine the experience related to urinary incontinence of stroke patients. In this qualitative descriptive study, using semistructured interviews, 15 participants with urinary incontinence after stroke selected through purposeful sampling were interviewed. Data were collected with a semistructured interview form prepared within the framework of the Health Belief Model. All data were analyzed using content analysis. Three main themes were identified: "perception of urinary incontinence," "effects of urinary incontinence," and "management of urinary incontinence." The respondents explained that urinary incontinence also adversely affected their caregivers. They experienced many daily life and psychological problems because of urinary incontinence. In addition, they made several changes to management urinary incontinence such as limiting fluid intake, changing underwear frequently, using waterproof mattress protectors, applying traditional practice, and taking medicine. This study revealed that stroke patients needed help and support for urinary incontinence management. Nurses should provide information about management and urinary incontinence after stroke.

Math Description Engine Software Development Kit

Science.gov (United States)

Shelton, Robert O.; Smith, Stephanie L.; Dexter, Dan E.; Hodgson, Terry R.

2010-01-01

The Math Description Engine Software Development Kit (MDE SDK) can be used by software developers to make computer-rendered graphs more accessible to blind and visually-impaired users. The MDE SDK generates alternative graph descriptions in two forms: textual descriptions and non-verbal sound renderings, or sonification. It also enables display of an animated trace of a graph sonification on a visual graph component, with color and line-thickness options for users having low vision or color-related impairments. A set of accessible graphical user interface widgets is provided for operation by end users and for control of accessible graph displays. Version 1.0 of the MDE SDK generates text descriptions for 2D graphs commonly seen in math and science curriculum (and practice). The mathematically rich text descriptions can also serve as a virtual math and science assistant for blind and sighted users, making graphs more accessible for everyone. The MDE SDK has a simple application programming interface (API) that makes it easy for programmers and Web-site developers to make graphs accessible with just a few lines of code. The source code is written in Java for cross-platform compatibility and to take advantage of Java s built-in support for building accessible software application interfaces. Compiled-library and NASA Open Source versions are available with API documentation and Programmer s Guide at http:/ / prim e.jsc.n asa. gov.

Optimism, self-efficiency and self-concept: Why some students expect greater academic success than others?

Directory of Open Access Journals (Sweden)

Sabina Bele

2009-07-01

Full Text Available The purpose of our research was to examine the relation between academic success and constructs: optimism, self-efficiency, and self-concept. We also wanted to examine how this relation reflects in previous and future marks of fourth-grade highschool students. We predicted that students with higher academic success in specific fields will also have higher specific self-concept, which reflects characteristic competence. We also predicted that more optimistic, more self-efficient students and students with higher self-concept will set up higher future goals, because they see desired goals as attainable and are persistent in reaching their goals. One-hundred students filled in the Self-Description Questionnire III (SDQIII, the Life Orientation Test-Revised (LOT-R, the Generalized Self-Efficacy Scale (GSE, and stated marks of their previous grade, present marks (Slovenian language, mathematics, and foreign language and anticipated marks at graduation. The results confirmed our expectations: Students with higher marks on different subjects in previous grade also had higher specific self-concept, and more optimistic and self-efficient students with higher self-concept set up higher future goals.

Relative thermoluminescent efficiencies proton/gamma and helium/gamma of high temperature peaks in TLD-100 dosemeters

International Nuclear Information System (INIS)

Flores M, E.; Avila, O.; Rodriguez V, M.; Massillon, J.L.G.; Buenfil A, E.; Ruiz T, C.; Brandan, M.E.; Gamboa De Buen, I.

2007-01-01

This work presents measures of relative thermoluminescent efficiency of those high temperature peaks of TLD-100 dosemeters exposed to protons of 1.5 MeV and to helium nuclei of 3 and 7.5 MeV. A rigorous reading and of deconvolution protocol was used for the calculation of the TL efficiencies. Additionally an Excel program that facilitated the deconvolution adjustment process of the glow curves was elaborated. (Author)

Production Logistics Simulation Supported by Process Description Languages

Directory of Open Access Journals (Sweden)

Bohács Gábor

2016-03-01

Full Text Available The process description languages are used in the business may be useful in the optimization of logistics processes too. The process description languages would be the obvious solution for process control, to handle the main sources of faults and to give a correct list of what to do during the logistics process. Related to this, firstly, the paper presents the main features of the frequent process description languages. The following section describes the currently most used process modelling languages, in the areas of production and construction logistics. In addition, the paper gives some examples of logistics simulation, as another very important field of logistics system modelling. The main edification of the paper, the logistics simulation supported by process description languages. The paper gives a comparison of a Petri net formal representation and a Simul8 model, through a construction logistics model, as the major contribution of the research.

Efficiency of interaction between various radiation and chemicals

International Nuclear Information System (INIS)

Kim, Jin Kyu; Song, H. S.; Kim, J. S.; Chun, K. J.; Lee, Y. K.; Lee, B. H.; Shin, H. S.; Lee, K. H.; Petin, Vladislav G.

2002-01-01

KAERI and INP (Poland) have been carried out parallel study and joint experiments on the major topics according to MOU about their cooperative project. Major experimental techniques were TSH assay, comet assay, and synergism assay. The research consisted of the following workscopes. 1) Application of TSH bioindicator for studying the biological efficiency of radiation, 2) Relative biological efficiency of californium-252 neutrons in the induction of gene and lethal mutations in TSH cells normal and enriched with boron compound, 3) Effect of pesticide on radiation-induced mutations in TSH cells, 4) Interaction of radiation with pesticide on DNA damage in human peripheral blood lymphocytes, 5) Radiomodifying effect of boron and gadolinium compounds in human peripheral blood lymphocytes, 6) Mathematical description of synergistic interactions, 7) General regularities of synergistic interactions, and 8) Determinant of synergistic interaction between radiation, heat and chemicals in cell killing. Both institutes have established wide variety of research techniques applicable to various radiation research through the cooperation. The results of research can make the role of fundamental basis for the better relationship between Korea and Poland

The descriptive epidemiology of sports/leisure-related heat illness hospitalisations in New South Wales, Australia.

Science.gov (United States)

Finch, Caroline F; Boufous, Soufiane

2008-01-01

Sport-related heat illness has not been commonly studied from an epidemiological perspective. This study presents the descriptive epidemiology of sports/leisure-related heat illness hospitalisations in New South Wales, Australia. All in-patient separations from all acute hospitals in NSW during 2001-2004, with an International Classification of Diseases external cause of injury code indicating "exposure to excessive natural heat (X30)" or any ICD-10 diagnosis code in the range: "effects of heat and light (T67.0-T67.9)", were analysed. The sport/leisure relatedness of cases was defined by ICD-10-AM activity codes indicating involvement in sport/leisure activities. Cases of exposure to heat while engaged in sport/leisure were described by gender, year, age, principal diagnosis, type of activity/sport and length of stay. There were 109 hospital separations for exposure to heat while engaging in sport/leisure activity, with the majority occurring during the hottest months. The number of male cases significantly increased over the 4-year period and 45+ -year olds had the largest number of cases. Heat exhaustion was the leading cause of hospital separation (40% of cases). Marathon running, cricket and golf were the activities most commonly associated with heat-related hospitalisation. Ongoing development and refinement of expert position statements regarding heat illnesses need to draw on both epidemiological and physiological evidence to ensure their relevance to all levels of risk from the real world sport training and competition contexts.

Reachability modules for the description logic SRIQ

CSIR Research Space (South Africa)

Nortje, R

2013-12-01

Full Text Available In this paper we investigate module extraction for the Description Logic SRIQ. We formulate modules in terms of the reachability problem for directed hypergraphs. Using inseperability relations, we investigate the module-theoretic properties...

The Role of Documentation Quality in Anesthesia-Related Closed Claims: A Descriptive Qualitative Study.

Science.gov (United States)

Wilbanks, Bryan A; Geisz-Everson, Marjorie; Boust, Rebecca R

2016-09-01

Clinical documentation is a critical tool in supporting care provided to patients. Sound documentation provides a picture of clinical events that can be used to improve patient care. However, many other uses for clinical documentation are equally important. Such documentation informs clinical decision support tools, creates a legal record of patient care, assists in financial reimbursement of services, and serves as a repository for secondary data analysis. Conversely, poor documentation can impair patient safety and increase malpractice risk exposure by reflecting poor or inaccurate information that ultimately may guide patient care decisions.Through an examination of anesthesia-related closed claims, a descriptive qualitative study emerged, which explored the antecedents and consequences of documentation quality in the claims reviewed. A secondary data analysis utilized a database generated by the American Association of Nurse Anesthetists Foundation closed claim review team. Four major themes emerged from the analysis. Themes 1, 2, and 4 primarily describe how poor documentation quality can have negative consequences for clinicians. The third theme primarily describes how poor documentation quality that can negatively affect patient safety.

Multidimensional nonlinear descriptive analysis

CERN Document Server

Nishisato, Shizuhiko

2006-01-01

Quantification of categorical, or non-numerical, data is a problem that scientists face across a wide range of disciplines. Exploring data analysis in various areas of research, such as the social sciences and biology, Multidimensional Nonlinear Descriptive Analysis presents methods for analyzing categorical data that are not necessarily sampled randomly from a normal population and often involve nonlinear relations. This reference not only provides an overview of multidimensional nonlinear descriptive analysis (MUNDA) of discrete data, it also offers new results in a variety of fields. The first part of the book covers conceptual and technical preliminaries needed to understand the data analysis in subsequent chapters. The next two parts contain applications of MUNDA to diverse data types, with each chapter devoted to one type of categorical data, a brief historical comment, and basic skills peculiar to the data types. The final part examines several problems and then concludes with suggestions for futu...

Unified description of astrophysical properties of neutron stars independent of the equation of state

Science.gov (United States)

Pappas, George

2015-12-01

In recent years, a lot of work was done that has revealed some very interesting properties of neutron stars. One can relate the first few multipole moments of a neutron star, or quantities that can be derived from them, with relations that are independent of the equation of state (EoS). This is a very significant result that has great implications for the description of neutron stars and in particular for the description of the spacetime around them. Additionally, it was recently shown that there is a four-parameter analytic spacetime, known as the two-soliton spacetime, which can accurately capture the properties of the geometry around neutron stars. This allows for the possibility of describing in a unified formalism the astrophysically relevant properties of the spacetime around a neutron star independently of the particulars of the EoS for the matter of the star. More precisely, the description of these astrophysical properties is done using an EoS omniscient spacetime that can describe the exterior of any neutron star. In the present work, we investigate properties such as the location of the innermost stable circular orbit RISCO (or the surface of the star when the latter overcomes the former), the various frequencies of perturbed circular equatorial geodesics, the efficiency of an accretion disc, its temperature distribution, and other properties associated with the emitted radiation from the disc, in a way that holds for all possible choices of a realistic EoS for the neutron star. Furthermore, we provide proof of principle that if one were to measure the right combinations of pairs of these properties, with the additional knowledge of the mass of the neutron star, one could determine the EoS of the star.

Productivity benefits of industrial energy efficiency measures

Energy Technology Data Exchange (ETDEWEB)

Worrell, Ernst; Laitner, John A.; Michael, Ruth; Finman, Hodayah

2004-08-30

We review the relationship between energy efficiency improvement measures and productivity in industry. We review over 70 industrial case studies from widely available published databases, followed by an analysis of the representation of productivity benefits in energy modeling. We propose a method to include productivity benefits in the economic assessment of the potential for energy efficiency improvement. The case-study review suggests that energy efficiency investments can provide a significant boost to overall productivity within industry. If this relationship holds, the description of energy-efficient technologies as opportunities for larger productivity improvements has significant implications for conventional economic assessments. The paper explores the implications this change in perspective on the evaluation of energy-efficient technologies for a study of the iron and steel industry in the US. This examination shows that including productivity benefits explicitly in the modeling parameters would double the cost-effective potential for energy efficiency improvement, compared to an analysis excluding those benefits. We provide suggestions for future research in this important area.

49 CFR 172.202 - Description of hazardous material on shipping papers.

Science.gov (United States)

2010-10-01

... papers. 172.202 Section 172.202 Transportation Other Regulations Relating to Transportation PIPELINE AND... INFORMATION, TRAINING REQUIREMENTS, AND SECURITY PLANS Shipping Papers § 172.202 Description of hazardous material on shipping papers. (a) The shipping description of a hazardous material on the shipping paper...

Analysis of remote working practice AND CALCULATION OF ECONOMIC EFFICIENCY

Directory of Open Access Journals (Sweden)

K. S. Ermakov

2015-01-01

Full Text Available The article is devoted to description of working from home practice at Allianz Insurance UK и Ernst & Young, UK & Ireland. It fulfilled the analysis of the best practices in the use of new forms of social and labor relations - remote work. The characteristics of using types of distance work, the policy of implementation and realization of such work in the company, the criteria for the transfer of employees to work remotely, the possibility of a flexible approach to workflow are given. The calculation of the economic efficiency of technology telecommuting at an aviation company of the Russian Federation is done. The method of calculating the cost-effectiveness based on several factors, such as costs for the organization and content of the workplace, change in labor productivity and others, was proposed by the authors. The calculation of economic efficiency by using the number of working hours, the impact on capital inputs and the impact on quit rates is considered.

Event-related potential evidence for the processing efficiency theory.

Science.gov (United States)

Murray, N P; Janelle, C M

2007-01-15

The purpose of this study was to examine the central tenets of the processing efficiency theory using psychophysiological measures of attention and effort. Twenty-eight participants were divided equally into either a high or low trait anxiety group. They were then required to perform a simulated driving task while responding to one of four target light-emitting diodes. Cortical activity and dual task performance were recorded under two conditions -- baseline and competition -- with cognitive anxiety being elevated in the competitive session by an instructional set. Although driving speed was similar across sessions, a reduction in P3 amplitude to cue onset in the light detection task occurred for both groups during the competitive session, suggesting a reduction in processing efficiency as participants became more state anxious. Our findings provide more comprehensive and mechanistic evidence for processing efficiency theory, and confirm that increases in cognitive anxiety can result in a reduction of processing efficiency with little change in performance effectiveness.

In vivo evaluation of the effect of stimulus distribution on FIR statistical efficiency in event-related fMRI.

Science.gov (United States)

Jansma, J Martijn; de Zwart, Jacco A; van Gelderen, Peter; Duyn, Jeff H; Drevets, Wayne C; Furey, Maura L

2013-05-15

Technical developments in MRI have improved signal to noise, allowing use of analysis methods such as Finite impulse response (FIR) of rapid event related functional MRI (er-fMRI). FIR is one of the most informative analysis methods as it determines onset and full shape of the hemodynamic response function (HRF) without any a priori assumptions. FIR is however vulnerable to multicollinearity, which is directly related to the distribution of stimuli over time. Efficiency can be optimized by simplifying a design, and restricting stimuli distribution to specific sequences, while more design flexibility necessarily reduces efficiency. However, the actual effect of efficiency on fMRI results has never been tested in vivo. Thus, it is currently difficult to make an informed choice between protocol flexibility and statistical efficiency. The main goal of this study was to assign concrete fMRI signal to noise values to the abstract scale of FIR statistical efficiency. Ten subjects repeated a perception task with five random and m-sequence based protocol, with varying but, according to literature, acceptable levels of multicollinearity. Results indicated substantial differences in signal standard deviation, while the level was a function of multicollinearity. Experiment protocols varied up to 55.4% in standard deviation. Results confirm that quality of fMRI in an FIR analysis can significantly and substantially vary with statistical efficiency. Our in vivo measurements can be used to aid in making an informed decision between freedom in protocol design and statistical efficiency. Published by Elsevier B.V.

Relations between the efficiency, power and dissipation for linear irreversible heat engine at maximum trade-off figure of merit

Science.gov (United States)

Iyyappan, I.; Ponmurugan, M.

2018-03-01

A trade of figure of merit (\\dotΩ ) criterion accounts the best compromise between the useful input energy and the lost input energy of the heat devices. When the heat engine is working at maximum \\dotΩ criterion its efficiency increases significantly from the efficiency at maximum power. We derive the general relations between the power, efficiency at maximum \\dotΩ criterion and minimum dissipation for the linear irreversible heat engine. The efficiency at maximum \\dotΩ criterion has the lower bound \

Genotypic variation in transpiration efficiency due to differences in photosynthetic capacity among sugarcane-related clones.

Science.gov (United States)

Li, Chunjia; Jackson, Phillip; Lu, Xin; Xu, Chaohua; Cai, Qing; Basnayake, Jayapathi; Lakshmanan, Prakash; Ghannoum, Oula; Fan, Yuanhong

2017-04-01

Sugarcane, derived from the hybridization of Saccharum officinarum×Saccharum spontaneum, is a vegetative crop in which the final yield is highly driven by culm biomass production. Cane yield under irrigated or rain-fed conditions could be improved by developing genotypes with leaves that have high intrinsic transpiration efficiency, TEi (CO2 assimilation/stomatal conductance), provided this is not offset by negative impacts from reduced conductance and growth rates. This study was conducted to partition genotypic variation in TEi among a sample of diverse clones from the Chinese collection of sugarcane-related germplasm into that due to variation in stomatal conductance versus that due to variation in photosynthetic capacity. A secondary goal was to define protocols for optimized larger-scale screening of germplasm collections. Genotypic variation in TEi was attributed to significant variation in both stomatal and photosynthetic components. A number of genotypes were found to possess high TEi as a result of high photosynthetic capacity. This trait combination is expected to be of significant breeding value. It was determined that a small number of observations (16) is sufficient for efficiently screening TEi in larger populations of sugarcane genotypes The research methodology and results reported are encouraging in supporting a larger-scale screening and introgression of high transpiration efficiency in sugarcane breeding. However, further research is required to quantify narrow sense heritability as well as the leaf-to-field translational potential of genotypic variation in transpiration efficiency-related traits observed in this study. © The Author 2017. Published by Oxford University Press on behalf of the Society for Experimental Biology.

Relative efficiency of hydrogen technologies for the hydrogen economy : a fuzzy AHP/DEA hybrid model approach

International Nuclear Information System (INIS)

Lee, S.

2009-01-01

As a provider of national energy security, the Korean Institute of Energy Research is seeking to establish a long term strategic technology roadmap for a hydrogen-based economy. This paper addressed 5 criteria regarding the strategy, notably economic impact, commercial potential, inner capacity, technical spinoff, and development cost. The fuzzy AHP and DEA hybrid model were used in a two-stage multi-criteria decision making approach to evaluate the relative efficiency of hydrogen technologies for the hydrogen economy. The fuzzy analytic hierarchy process reflects the uncertainty of human thoughts with interval values instead of clear-cut numbers. It therefore allocates the relative importance of 4 criteria, notably economic impact, commercial potential, inner capacity and technical spin-off. The relative efficiency of hydrogen technologies for the hydrogen economy can be measured via data envelopment analysis. It was concluded that the scientific decision making approach can be used effectively to allocate research and development resources and activities

Relative efficiency of hydrogen technologies for the hydrogen economy : a fuzzy AHP/DEA hybrid model approach

Energy Technology Data Exchange (ETDEWEB)

Lee, S. [Korea Inst. of Energy Research, Daejeon (Korea, Republic of). Energy Policy Research Division; Mogi, G. [Tokyo Univ., (Japan). Dept. of Technology Management for Innovation, Graduate School of Engineering; Kim, J. [Korea Inst. of Energy Research, Daejeon (Korea, Republic of)

2009-07-01

As a provider of national energy security, the Korean Institute of Energy Research is seeking to establish a long term strategic technology roadmap for a hydrogen-based economy. This paper addressed 5 criteria regarding the strategy, notably economic impact, commercial potential, inner capacity, technical spinoff, and development cost. The fuzzy AHP and DEA hybrid model were used in a two-stage multi-criteria decision making approach to evaluate the relative efficiency of hydrogen technologies for the hydrogen economy. The fuzzy analytic hierarchy process reflects the uncertainty of human thoughts with interval values instead of clear-cut numbers. It therefore allocates the relative importance of 4 criteria, notably economic impact, commercial potential, inner capacity and technical spin-off. The relative efficiency of hydrogen technologies for the hydrogen economy can be measured via data envelopment analysis. It was concluded that the scientific decision making approach can be used effectively to allocate research and development resources and activities.

GATE: Improving the computational efficiency

International Nuclear Information System (INIS)

Staelens, S.; De Beenhouwer, J.; Kruecker, D.; Maigne, L.; Rannou, F.; Ferrer, L.; D'Asseler, Y.; Buvat, I.; Lemahieu, I.

2006-01-01

GATE is a software dedicated to Monte Carlo simulations in Single Photon Emission Computed Tomography (SPECT) and Positron Emission Tomography (PET). An important disadvantage of those simulations is the fundamental burden of computation time. This manuscript describes three different techniques in order to improve the efficiency of those simulations. Firstly, the implementation of variance reduction techniques (VRTs), more specifically the incorporation of geometrical importance sampling, is discussed. After this, the newly designed cluster version of the GATE software is described. The experiments have shown that GATE simulations scale very well on a cluster of homogeneous computers. Finally, an elaboration on the deployment of GATE on the Enabling Grids for E-Science in Europe (EGEE) grid will conclude the description of efficiency enhancement efforts. The three aforementioned methods improve the efficiency of GATE to a large extent and make realistic patient-specific overnight Monte Carlo simulations achievable

Analysis of the system efficiency of an intermediate temperature proton exchange membrane fuel cell at elevated temperature and relative humidity conditions

International Nuclear Information System (INIS)

Jeon, Seung Won; Cha, Dowon; Kim, Hyung Soon; Kim, Yongchan

2016-01-01

Highlights: • System efficiency of PEMFC is evaluated at elevated temperature and humidity. • Operating parameters are optimized using response surface methodology. • The optimal operating parameters are T = 90.6 °C, RH = 100.0%, and ζ = 2.07. • The power output and system efficiency are 1.28 W and 15.8% at the optimum. • The system efficiency can be effectively improved by increasing relative humidity. - Abstract: Humidification of the membrane is very important in a proton exchange membrane fuel cell (PEMFC), to maintain high ionic conductivity. At an elevated temperature, a large amount of thermal energy is required for humidification because of the exponentially increased saturation vapor pressure. In this study, the system efficiency of a PEMFC was evaluated by considering the heat required for preheating/humidification and compression work. Three-dimensional steady-state simulations were conducted using Fluent 14 to simulate the electrochemical reactions. The operating conditions were optimized using response surface methodology by considering both the fuel cell output and system efficiency. In addition, the effects of operating parameters such as the temperature, relative humidity, and stoichiometric ratio were investigated. The system efficiency can be improved more effectively by increasing relative humidity rather than increasing operating temperature because the ionic conductivity of the membrane was strongly influenced by the relative humidity.

Universal Natural Shapes: From Unifying Shape Description to Simple Methods for Shape Analysis and Boundary Value Problems

Science.gov (United States)

Gielis, Johan; Caratelli, Diego; Fougerolle, Yohan; Ricci, Paolo Emilio; Tavkelidze, Ilia; Gerats, Tom

2012-01-01

Gielis curves and surfaces can describe a wide range of natural shapes and they have been used in various studies in biology and physics as descriptive tool. This has stimulated the generalization of widely used computational methods. Here we show that proper normalization of the Levenberg-Marquardt algorithm allows for efficient and robust reconstruction of Gielis curves, including self-intersecting and asymmetric curves, without increasing the overall complexity of the algorithm. Then, we show how complex curves of k-type can be constructed and how solutions to the Dirichlet problem for the Laplace equation on these complex domains can be derived using a semi-Fourier method. In all three methods, descriptive and computational power and efficiency is obtained in a surprisingly simple way. PMID:23028417

Description of surface systems. Preliminary site description. Forsmark area Version 1.2

Energy Technology Data Exchange (ETDEWEB)

Lindborg, Tobias [ed.

2005-06-01

Swedish Nuclear Fuel and Waste Management Co (SKB) started site investigations for a deep repository for spent nuclear fuel in 2002 at two different sites in Sweden, Forsmark and Oskarshamn. The investigations should provide necessary information for a license application aimed at starting underground exploration. For this reason, ecosystem data need to be interpreted and assessed into site descriptive models, which in turn are used for safety assessment studies and for environmental impact assessment. Descriptions of the surface system are also needed for further planning of the site investigations. This report describes the surface ecosystems of the Forsmark site (e.g. hydrology, Quaternary deposits, chemistry, vegetation, animals and the human land use). The ecosystem description is an integration of the site and its regional setting, covering the current state of the biosphere as well as the ongoing natural processes affecting the longterm development. Improving the descriptions is important during both the initial and the complete site investigation phase. Before starting of the initial phase in Forsmark, version 0 of the site descriptive model was developed. The results of the initial site investigation phase is compiled into a preliminary site description of Forsmark (version 1.2) in June 2005. This report provides the major input and background to the biosphere description, in the 1.2 version of the Forsmark site description. The basis for this interim version is quality-assured field data from the Forsmark sub area and regional area, available in the SKB SICADA, and GIS data bases as of July 31th 2004 as well as version 1.1 of the Site Descriptive Model. To achieve an ecosystem site description there is a need to develop discipline-specific models by interpreting and analysing primary data. The different discipline-specific models are then integrated into a system describing interactions and flows and stocks of matter between and within functional units in

Description of surface systems. Preliminary site description. Forsmark area Version 1.2

International Nuclear Information System (INIS)

Lindborg, Tobias

2005-06-01

Swedish Nuclear Fuel and Waste Management Co (SKB) started site investigations for a deep repository for spent nuclear fuel in 2002 at two different sites in Sweden, Forsmark and Oskarshamn. The investigations should provide necessary information for a license application aimed at starting underground exploration. For this reason, ecosystem data need to be interpreted and assessed into site descriptive models, which in turn are used for safety assessment studies and for environmental impact assessment. Descriptions of the surface system are also needed for further planning of the site investigations. This report describes the surface ecosystems of the Forsmark site (e.g. hydrology, Quaternary deposits, chemistry, vegetation, animals and the human land use). The ecosystem description is an integration of the site and its regional setting, covering the current state of the biosphere as well as the ongoing natural processes affecting the longterm development. Improving the descriptions is important during both the initial and the complete site investigation phase. Before starting of the initial phase in Forsmark, version 0 of the site descriptive model was developed. The results of the initial site investigation phase is compiled into a preliminary site description of Forsmark (version 1.2) in June 2005. This report provides the major input and background to the biosphere description, in the 1.2 version of the Forsmark site description. The basis for this interim version is quality-assured field data from the Forsmark sub area and regional area, available in the SKB SICADA, and GIS data bases as of July 31th 2004 as well as version 1.1 of the Site Descriptive Model. To achieve an ecosystem site description there is a need to develop discipline-specific models by interpreting and analysing primary data. The different discipline-specific models are then integrated into a system describing interactions and flows and stocks of matter between and within functional units in

A Comparative Analysis of Energy Usage and Energy Efficiency Behavior in Low- and High-Income Households: The Case of Kitwe, Zambia

Directory of Open Access Journals (Sweden)

Albert Malama

2015-11-01

Full Text Available Energy efficiency has been an important topic since the latter part of the last century. This is because adoption of energy efficiency measures has been acknowledged as one of the key methods of addressing the negative impact of climate change. In Zambia, however, the need to adopt energy efficiency measures has not just been driven by the imperative to mitigate the negative effects of climate change but also by a critical shortage of energy. This research looks at households’ energy consumption behavior in low- and high-income areas of Kitwe. Recent studies on the relationship between household energy consumption and behavioral lifestyle have been descriptive, with limited emphasis on the relationships between various variables. In this study, descriptive and inferential statistics have been used to investigate relationships between the two income groups and various energy consumption-related variables such as knowledge about energy reduction measures, energy saving strategies, barriers to the use of energy saving strategies, and the motives for using energy reduction strategies. Methodologically, the study was largely quantitative in nature, with questionnaires administered to a combined total of 56 households. However, key interviews were also conducted that helped us to get a clearer understanding of some of the issues covered in the research. Key findings are that whereas the descriptive statistics show that there are behavioral differences between the two income groups, the inferential statistics show that there is no relationship between income level and the energy efficiency variables. This has been found to be consistent with results from studies done elsewhere. The key lesson is that there is low usage of energy efficiency measures in both low- and high-income areas and that the authorities need to change the way information is disseminated to consumers from the current method of advertising to social diffusion.

Hardware description languages

Science.gov (United States)

Tucker, Jerry H.

1994-01-01

Hardware description languages are special purpose programming languages. They are primarily used to specify the behavior of digital systems and are rapidly replacing traditional digital system design techniques. This is because they allow the designer to concentrate on how the system should operate rather than on implementation details. Hardware description languages allow a digital system to be described with a wide range of abstraction, and they support top down design techniques. A key feature of any hardware description language environment is its ability to simulate the modeled system. The two most important hardware description languages are Verilog and VHDL. Verilog has been the dominant language for the design of application specific integrated circuits (ASIC's). However, VHDL is rapidly gaining in popularity.

The wave-based substructuring approach for the efficient description of interface dynamics in substructuring

Science.gov (United States)

Donders, S.; Pluymers, B.; Ragnarsson, P.; Hadjit, R.; Desmet, W.

2010-04-01

In the vehicle design process, design decisions are more and more based on virtual prototypes. Due to competitive and regulatory pressure, vehicle manufacturers are forced to improve product quality, to reduce time-to-market and to launch an increasing number of design variants on the global market. To speed up the design iteration process, substructuring and component mode synthesis (CMS) methods are commonly used, involving the analysis of substructure models and the synthesis of the substructure analysis results. Substructuring and CMS enable efficient decentralized collaboration across departments and allow to benefit from the availability of parallel computing environments. However, traditional CMS methods become prohibitively inefficient when substructures are coupled along large interfaces, i.e. with a large number of degrees of freedom (DOFs) at the interface between substructures. The reason is that the analysis of substructures involves the calculation of a number of enrichment vectors, one for each interface degree of freedom (DOF). Since large interfaces are common in vehicles (e.g. the continuous line connections to connect the body with the windshield, roof or floor), this interface bottleneck poses a clear limitation in the vehicle noise, vibration and harshness (NVH) design process. Therefore there is a need to describe the interface dynamics more efficiently. This paper presents a wave-based substructuring (WBS) approach, which allows reducing the interface representation between substructures in an assembly by expressing the interface DOFs in terms of a limited set of basis functions ("waves"). As the number of basis functions can be much lower than the number of interface DOFs, this greatly facilitates the substructure analysis procedure and results in faster design predictions. The waves are calculated once from a full nominal assembly analysis, but these nominal waves can be re-used for the assembly of modified components. The WBS approach thus

Systems Biology Graphical Notation: Process Description language Level 1 Version 1.3.

Science.gov (United States)

Moodie, Stuart; Le Novère, Nicolas; Demir, Emek; Mi, Huaiyu; Villéger, Alice

2015-09-04

The Systems Biological Graphical Notation (SBGN) is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD), Entity Relationship (ER) and Activity Flow (AF), allow for the representation of different aspects of biological and biochemical systems at different levels of detail. The SBGN Process Description language represents biological entities and processes between these entities within a network. SBGN PD focuses on the mechanistic description and temporal dependencies of biological interactions and transformations. The nodes (elements) are split into entity nodes describing, e.g., metabolites, proteins, genes and complexes, and process nodes describing, e.g., reactions and associations. The edges (connections) provide descriptions of relationships (or influences) between the nodes, such as consumption, production, stimulation and inhibition. Among all three languages of SBGN, PD is the closest to metabolic and regulatory pathways in biological literature and textbooks, but its well-defined semantics offer a superior precision in expressing biological knowledge.

The efficiency of life insurance and family Takaful in Malaysia: Relative efficiency using the stochastic cost frontier analysis

Science.gov (United States)

Baharin, Roziana; Isa, Zaidi

2013-04-01

This paper focuses on the Stochastic cost Frontier Analysis (SFA) approach, in an attempt to measure the relationship between efficiency and organizational structure for Takaful and insurance operators in Malaysia's dual financial system. This study applied a flexible cost functional form i.e., Fourier Flexible Functional Form, for a sample consisting of 19 firms, chosen between 2002 and 2010, by employing the Battese and Coelli invariant efficiency model. The findings show that on average, there is a significant difference in cost efficiency between the Takaful industry and the insurance industry. It was found that Takaful has lower cost efficiency than conventional insurance, which shows that the organization form has an influence on efficiency. Overall, it was observed that the level of efficiency scores for both life insurance and family Takaful do not vary across time.

Observation and description of works of art in the medical teaching. An experience at the University of Oviedo

Directory of Open Access Journals (Sweden)

Agustín HIDALGO

2018-06-01

Full Text Available The analysis of works of art has is of educational interest in medicine because it allows students to initiate the skill of observation, necessary to educate the gaze in a thorough and systematic clinical exploration. With the aim of exploring the possible formative role of analysis, documentation, description of works of art and their subsequent communication 150 medical students per course participated. Students achieved a grade of 8.5 or above out of 10 in the communication and documentation exercises. They also identified, in more than 90% of cases, elements related to medicine, but were less efficient at relating the pictorial, figurative or accessory elements, or transferring at present the history reflected in the work of art. More than 60% of the students consider that the activity has a formative interest.

Relative thermoluminescent efficiencies proton/gamma and helium/gamma of peaks of high temperature in TLD-100 dosemeters

International Nuclear Information System (INIS)

Flores M, E.

2007-01-01

The increase of the applications of ion beams in radiotherapy treatments has generated interest in the study of the thermoluminescent materials (TL) that allow to determine the applied doses. A way to quantify the TL response from these materials to ions is by means of the relative thermoluminescent efficiency. In the group of Thermoluminescent dosimetry of the Institute of Physics of the UNAM (IFUNAM) the thermoluminescent response of the TLD-100 dosemeters has been studied, which present a glow curve characteristic with several peaks that correspond to traps and luminescent centers in the material. The stable peaks know each other as 4, 5, 6a, 6b, 7, 8, 9 and 10. The efficiencies should be measured using the response so much to the radiation of interest (in this case protons and helium ions) as the response to gamma radiation. In previous works with ions of low energy taken place in the Pelletron accelerator of the IFUNAM was only measured the TL efficiency for the peak 5 and the total signal. It had not been possible to measure the efficiency of the peaks of high temperature (6a-10) because, for the gamma radiation, the peaks of high temperature show very small signals; however, recently Massillon carries out measures of efficiency TL of peaks of high temperature for ions of intermediate energy using a protocol special of reading and of deconvolution that allows to measure the signals coming from the peaks of high temperature. In this work is implemented this same protocol to complete the study of TL efficiencies at low energy of protons and helium and to determine if the values of efficiency depend on the used reading protocol. For it is reported it measures of the relative efficiency of the peaks of high temperature from the TLD-100 exposed to protons of 1.5 MeV and nuclei of helium of 3 and 7.5 MeV. (Author)

Relative Efficiency Indicators of the Credit Management Process in a Colombian Bank by Means of Data Envelopment Analysis (DEA)

OpenAIRE

Sánchez-Gooding, Sandra Paola; Universidad Nacional de Colombia; Rodríguez-Lozano, Gloria Isabel; Universidad Nacional de Colombia

2017-01-01

The purpose of this work is to measure the relative efficiency of the units that take part in the credit management process in a Colombian bank by means of the use of Data Envelopment Analysis (DEA). Using a doublé optimization process, this advanced linear programmingmethodology generates a single relative efficiency index for each one of the units being studied, although it is capable of including multiple resources and multiple outputs. In the bank that was used as the object of this study...

Do descriptive norms related to parents and friends predict fruit and vegetable intake similarly among 11-year-old girls and boys?

Science.gov (United States)

Lehto, Elviira; Ray, Carola; Haukkala, Ari; Yngve, Agneta; Thorsdottir, Inga; Roos, Eva

2016-01-14

We examined whether there are sex differences in children's fruit and vegetable (FV) intake and in descriptive norms (i.e. perceived FV intake) related to parents and friends. We also studied whether friends' impact is as important as that of parents on children's FV intake. Data from the PRO GREENS project in Finland were obtained from 424 children at the age 11 years at baseline. At baseline, 2009 children filled in a questionnaire about descriptive norms conceptualised as perceived FV intake of their parents and friends. They also filled in a validated FFQ that assessed their FV intake both at baseline and in the follow-up in 2010. The associations were examined with multi-level regression analyses with multi-group comparisons. Girls reported higher perceived FV intake of friends and higher own fruit intake at baseline, compared with boys, and higher vegetable intake both at baseline and in the follow-up. Perceived FV intake of parents and friends was positively associated with both girls' and boys' FV intake in both study years. The impact of perceived fruit intake of the mother was stronger among boys. The change in children's FV intake was affected only by perceived FV intake of father and friends. No large sex differences in descriptive norms were found, but the impact of friends on children's FV intake can generally be considered as important as that of parents. Future interventions could benefit from taking into account friends' impact as role models on children's FV intake.

Business Models, transparency and efficient stock price formation

DEFF Research Database (Denmark)

Nielsen, Christian; Vali, Edward; Hvidberg, Rene

has an impact on a company's price formation. In this respect, we analysed whether those companies that publish a lot of information that may support a business model description tend to have a more efficient price formation. Next, we turned to our sample of companies, and via interview-based case...... studies, we managed to draw conclusions on how to construct a comprehensible business model description. The business model explains how the company intends to compete in its market, and thus it gives an account of the characteristics that make the company unique. The business model constitutes...... the platform from which the company prepares and unfolds its strategy. In order to explain this platform and its particular qualities to external interested parties, the description must provide a clear and explicit account of the main determinants of the company's value creation and explain how...

An empirical method to measure the relative efficiency of dairy producers using deterministic frontier analysis

Directory of Open Access Journals (Sweden)

Shahram RostamPour

2012-01-01

Full Text Available The purpose of this paper is to measure the relative efficiencies of various cow husbandries. The proposed model of this paper uses distribution free analysis to measure the performance of different units responsible for taking care of cows. We gather the necessary information of all units including number of cows, amount of internet usage, number of subunits for taking care of cows, amount of forage produced in each province for grazing livestock and average hour per person training courses as independent variables and consider the amount of produced milk as dependent variable. The necessary information are collected from all available units located in different provinces of Iran and the production function is estimated using a linear programming model. The results indicate that the capital city of Iran, Tehran, holds the highest technical efficiency, the lowest efficiency belongs to province of Ilam and other provinces mostly performs poorly.

Multiple descriptions based on multirate coding for JPEG 2000 and H.264/AVC.

Science.gov (United States)

Tillo, Tammam; Baccaglini, Enrico; Olmo, Gabriella

2010-07-01

Multiple description coding (MDC) makes use of redundant representations of multimedia data to achieve resiliency. Descriptions should be generated so that the quality obtained when decoding a subset of them only depends on their number and not on the particular received subset. In this paper, we propose a method based on the principle of encoding the source at several rates, and properly blending the data encoded at different rates to generate the descriptions. The aim is to achieve efficient redundancy exploitation, and easy adaptation to different network scenarios by means of fine tuning of the encoder parameters. We apply this principle to both JPEG 2000 images and H.264/AVC video data. We consider as the reference scenario the distribution of contents on application-layer overlays with multiple-tree topology. The experimental results reveal that our method favorably compares with state-of-art MDC techniques.

Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

Energy Technology Data Exchange (ETDEWEB)

Lindborg, Tobias [ed.

2005-03-01

Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions.

Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

International Nuclear Information System (INIS)

Lindborg, Tobias

2005-03-01

Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions

Profitability, Inputs Elasticities And Resource-Use Efficiency In Small ...

African Journals Online (AJOL)

The study examined profitability, inputs elasticities and resource-use efficiency in small scale cowpea production in Niger State, Nigeria. The primary data for the study were obtained using structured questionnaire administered to one hundred randomly sampled farmers from two Local Government Areas. Descriptive ...

Markets, jobs, and energetic challenge of activities related to renewable energies and to energy efficiency. Situation in 2007-2008. Perspectives for 2009

International Nuclear Information System (INIS)

2009-10-01

This study proposes an annual evolution survey of markets and jobs related to the development of renewable energies and to the improvement of energy efficiency in the housing and transport sectors. Markets are related to wind energy, thermal and photovoltaic energy, heat pumps, wood, bio-diesel, bio-ethanol, biogas, waste energetic valorization, geothermal energy, and hydro-energy. Energy efficiency improvements in the housing sector are related to energetic improvement of existing dwellings, condensing boilers, energetically performing household electrical appliances, and compact fluorescent lamps. In the transport sector, energy efficiency improvements concern rail transports and tramways as well as individual vehicles. New markets are identified and discussed: research and development for renewable energies, energy consultancy and diagnosis, energy efficiency in the office building sector and in the industrial sector

Toward efficient computation of the expected relative entropy for nonlinear experimental design

International Nuclear Information System (INIS)

Coles, Darrell; Prange, Michael

2012-01-01

The expected relative entropy between prior and posterior model-parameter distributions is a Bayesian objective function in experimental design theory that quantifies the expected gain in information of an experiment relative to a previous state of knowledge. The expected relative entropy is a preferred measure of experimental quality because it can handle nonlinear data-model relationships, an important fact due to the ubiquity of nonlinearity in science and engineering and its effects on post-inversion parameter uncertainty. This objective function does not necessarily yield experiments that mediate well-determined systems, but, being a Bayesian quality measure, it rigorously accounts for prior information which constrains model parameters that may be only weakly constrained by the optimized dataset. Historically, use of the expected relative entropy has been limited by the computing and storage requirements associated with high-dimensional numerical integration. Herein, a bifocal algorithm is developed that makes these computations more efficient. The algorithm is demonstrated on a medium-sized problem of sampling relaxation phenomena and on a large problem of source–receiver selection for a 2D vertical seismic profile. The method is memory intensive but workarounds are discussed. (paper)

Guidelines for Description

NARCIS (Netherlands)

Links, P.; Horsman, Peter; Kühnel, Karsten; Priddy, M.; Reijnhoudt, Linda; Merenmies, Mark

2013-01-01

The Guidelines follow the conceptual metadata model (deliverable 17.2). They include guidelines for description of collection-holding institutions, document collections, organisations, personalities, events, camps and ghettos. As much as possible the guidelines comply with the descriptive standards

Natural gas and CO2 price variation: impact on the relative cost-efficiency of LNG and pipelines.

Science.gov (United States)

Ulvestad, Marte; Overland, Indra

2012-06-01

THIS ARTICLE DEVELOPS A FORMAL MODEL FOR COMPARING THE COST STRUCTURE OF THE TWO MAIN TRANSPORT OPTIONS FOR NATURAL GAS: liquefied natural gas (LNG) and pipelines. In particular, it evaluates how variations in the prices of natural gas and greenhouse gas emissions affect the relative cost-efficiency of these two options. Natural gas is often promoted as the most environmentally friendly of all fossil fuels, and LNG as a modern and efficient way of transporting it. Some research has been carried out into the local environmental impact of LNG facilities, but almost none into aspects related to climate change. This paper concludes that at current price levels for natural gas and CO 2 emissions the distance from field to consumer and the volume of natural gas transported are the main determinants of transport costs. The pricing of natural gas and greenhouse emissions influence the relative cost-efficiency of LNG and pipeline transport, but only to a limited degree at current price levels. Because more energy is required for the LNG process (especially for fuelling the liquefaction process) than for pipelines at distances below 9100 km, LNG is more exposed to variability in the price of natural gas and greenhouse gas emissions up to this distance. If the prices of natural gas and/or greenhouse gas emission rise dramatically in the future, this will affect the choice between pipelines and LNG. Such a price increase will be favourable for pipelines relative to LNG.

Parent-reported health-related quality of life of children with Down syndrome: a descriptive study.

Science.gov (United States)

Shields, Nora; Leonard, Helen; Munteanu, Shannon; Bourke, Jennifer; Lim, Polly; Taylor, Nicholas F; Downs, Jenny

2018-04-01

To describe health-related quality of life of Australian children and adolescents with Down syndrome and compare it with norm-referenced data. A cross-sectional survey was conducted with parents of 75 children and adolescents (43 males, 32 females) with Down syndrome aged 5 to 18 years (mean age 13y 2mo, SD 4y 8mo). The proxy-report KIDSCREEN-27 questionnaire was administered and five dimensions of health-related quality of life were measured. Data were analysed descriptively and compared with normative data. Total group mean scores for psychological well-being, autonomy and parent relation, and school environment dimensions were within normal threshold values, whereas mean scores for physical well-being, and social support and peers dimensions, were poorer. For participants with Down syndrome aged 8 to 18 years, the difference with normative data for proxy-reported physical well-being, psychological well-being, and social support and peers dimensions favoured typically developing children. Adolescents (13-18y) with Down syndrome scored poorer on all dimensions than children (5-12y) with Down syndrome. Our findings assist a better understanding of the lived experiences of children and adolescents with Down syndrome, as perceived by their parents, and suggest aspects of health that could be influenced to optimize their quality of life. Proxy-reported psychological well-being and autonomy were within the normal range for children with Down syndrome. Physical well-being and social support scores were significantly lower than normative data. Proxy-reported scores for adolescents with Down syndrome were consistently poorer than for children with Down syndrome and the differences were clinically important. © 2018 Mac Keith Press.

Irreducible descriptive sets of attributes for information systems

KAUST Repository

Moshkov, Mikhail

2010-01-01

The maximal consistent extension Ext(S) of a given information system S consists of all objects corresponding to attribute values from S which are consistent with all true and realizable rules extracted from the original information system S. An irreducible descriptive set for the considered information system S is a minimal (relative to the inclusion) set B of attributes which defines exactly the set Ext(S) by means of true and realizable rules constructed over attributes from the considered set B. We show that there exists only one irreducible descriptive set of attributes. We present a polynomial algorithm for this set construction. We also study relationships between the cardinality of irreducible descriptive set of attributes and the number of attributes in S. The obtained results will be useful for the design of concurrent data models from experimental data. © 2010 Springer-Verlag.

Qualitative description - the poor cousin of health research?

DEFF Research Database (Denmark)

Neergaard, Mette Asbjørn; Olesen, Frede; Andersen, Rikke Sand

2009-01-01

', relatives' or professionals' experiences with a particular topic. Another great advantage of the method is that it is suitable if time or resources are limited. SUMMARY: As a consequence of the growth in qualitative research in the health sciences, researchers sometimes feel obliged to designate their work......BACKGROUND: The knowledge and use of qualitative description as a qualitative research approach in health services research is limited.The aim of this article is to discuss the potential benefits of a qualitative descriptive approach, to identify its strengths and weaknesses and to provide examples...... of use. DISCUSSION: Qualitative description is a useful qualitative method in much medical research if you keep the limitations of the approach in mind. It is especially relevant in mixed method research, in questionnaire development and in research projects aiming to gain firsthand knowledge of patients...

Descriptive statistics.

Science.gov (United States)

Nick, Todd G

2007-01-01

Statistics is defined by the Medical Subject Headings (MeSH) thesaurus as the science and art of collecting, summarizing, and analyzing data that are subject to random variation. The two broad categories of summarizing and analyzing data are referred to as descriptive and inferential statistics. This chapter considers the science and art of summarizing data where descriptive statistics and graphics are used to display data. In this chapter, we discuss the fundamentals of descriptive statistics, including describing qualitative and quantitative variables. For describing quantitative variables, measures of location and spread, for example the standard deviation, are presented along with graphical presentations. We also discuss distributions of statistics, for example the variance, as well as the use of transformations. The concepts in this chapter are useful for uncovering patterns within the data and for effectively presenting the results of a project.

Energetics and efficiency of a molecular motor model

International Nuclear Information System (INIS)

Fogedby, Hans C; Svane, Axel

2013-01-01

The energetics and efficiency of a linear molecular motor model proposed by Mogilner et al are analyzed from an analytical point of view. The model, which is based on protein friction with a track, is described by coupled Langevin equations for the motion in combination with coupled master equations for the ATP hydrolysis. Here the energetics and efficiency of the motor are addressed using a many body scheme with focus on the efficiency at maximum power (EMP). It is found that the EMP is reduced from about 10% in a heuristic description of the motor to about 1 per mille when incorporating the full motor dynamics, owing to the strong dissipation associated with the motor action. (paper)

Energy Efficiency Improvement and Cost Saving Opportunities for the U.S. Iron and Steel Industry An ENERGY STAR(R) Guide for Energy and Plant Managers

Energy Technology Data Exchange (ETDEWEB)

Worrell, Ernst; Blinde, Paul; Neelis, Maarten; Blomen, Eliane; Masanet, Eric

2010-10-21

Energy is an important cost factor in the U.S iron and steel industry. Energy efficiency improvement is an important way to reduce these costs and to increase predictable earnings, especially in times of high energy price volatility. There are a variety of opportunities available at individual plants in the U.S. iron and steel industry to reduce energy consumption in a cost-effective manner. This Energy Guide discusses energy efficiency practices and energy-efficient technologies that can be implemented at the component, process, facility, and organizational levels. A discussion of the structure, production trends, energy consumption, and greenhouse gas emissions of the iron and steel industry is provided along with a description of the major process technologies used within the industry. Next, a wide variety of energy efficiency measures are described. Many measure descriptions include expected savings in energy and energy-related costs, based on case study data from real-world applications in the steel and related industries worldwide. Typical measure payback periods and references to further information in the technical literature are also provided, when available. The information in this Energy Guide is intended to help energy and plant managers in the U.S. iron and steel industry reduce energy consumption and greenhouse gas emissions in a cost-effective manner while maintaining the quality of products manufactured. Further research on the economics of all measures?and on their applicability to different production practices?is needed to assess their cost effectiveness at individual plants.

Energy Efficiency Improvement and Cost Saving Opportunities for the Dairy Processing Industry: An ENERGY STAR? Guide for Energy and Plant Managers

Energy Technology Data Exchange (ETDEWEB)

Brush, Adrian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Masanet, Eric [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Worrell, Ernst [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2011-10-01

The U.S. dairy processing industry—defined in this Energy Guide as facilities engaged in the conversion of raw milk to consumable dairy products—consumes around $1.5 billion worth of purchased fuels and electricity per year. Energy efficiency improvement is an important way to reduce these costs and to increase predictable earnings, especially in times of high energy price volatility. There are a variety of opportunities available at individual plants in the U.S. dairy processing industry to reduce energy consumption and greenhouse gas emissions in a cost-effective manner. This Energy Guide discusses energy efficiency practices and energy-efficient technologies that can be implemented at the component, process, facility, and organizational levels. A discussion of the trends, structure, and energy consumption characteristics of the U.S. dairy processing industry is provided along with a description of the major process technologies used within the industry. Next, a wide variety of energy efficiency measures applicable to dairy processing plants are described. Many measure descriptions include expected savings in energy and energy-related costs, based on case study data from real-world applications in dairy processing facilities and related industries worldwide. Typical measure payback periods and references to further information in the technical literature are also provided, when available. Given the importance of water in dairy processing, a summary of basic, proven measures for improving water efficiency are also provided. The information in this Energy Guide is intended to help energy and plant managers in the U.S. dairy processing industry reduce energy and water consumption in a cost-effective manner while maintaining the quality of products manufactured. Further research on the economics of all measures—as well as on their applicability to different production practices—is needed to assess their cost effectiveness at individual plants.

Qualitative description – the poor cousin of health research?

Science.gov (United States)

2009-01-01

Background The knowledge and use of qualitative description as a qualitative research approach in health services research is limited. The aim of this article is to discuss the potential benefits of a qualitative descriptive approach, to identify its strengths and weaknesses and to provide examples of use. Discussion Qualitative description is a useful qualitative method in much medical research if you keep the limitations of the approach in mind. It is especially relevant in mixed method research, in questionnaire development and in research projects aiming to gain firsthand knowledge of patients', relatives' or professionals' experiences with a particular topic. Another great advantage of the method is that it is suitable if time or resources are limited. Summary As a consequence of the growth in qualitative research in the health sciences, researchers sometimes feel obliged to designate their work as phenomenology, grounded theory, ethnography or a narrative study when in fact it is not. Qualitative description might be a useful alternative approach to consider. PMID:19607668

Productive Efficiency of Small Scale Sawmilling Industries in Mufindi ...

African Journals Online (AJOL)

A structured questionnaire was used to collect data from 80 small-scale sawmills in Mufindi District. Data were analysed using descriptive as well as quantitative methods. Technical, scale and allocative efficiency score of sawmills were computed using data envelopment analysis programme developed by Coelli. Censored ...

Pairwise Trajectory Management (PTM): Concept Description and Documentation

Science.gov (United States)

Jones, Kenneth M.; Graff, Thomas J.; Carreno, Victor; Chartrand, Ryan C.; Kibler, Jennifer L.

2018-01-01

Pairwise Trajectory Management (PTM) is an Interval Management (IM) concept that utilizes airborne and ground-based capabilities to enable the implementation of airborne pairwise spacing capabilities in oceanic regions. The goal of PTM is to use airborne surveillance and tools to manage an "at or greater than" inter-aircraft spacing. Due to the accuracy of Automatic Dependent Surveillance-Broadcast (ADS-B) information and the use of airborne spacing guidance, the minimum PTM spacing distance will be less than distances a controller can support with current automation systems that support oceanic operations. Ground tools assist the controller in evaluating the traffic picture and determining appropriate PTM clearances to be issued. Avionics systems provide guidance information that allows the flight crew to conform to the PTM clearance issued by the controller. The combination of a reduced minimum distance and airborne spacing management will increase the capacity and efficiency of aircraft operations at a given altitude or volume of airspace. This document provides an overview of the proposed application, a description of several key scenarios, a high level discussion of expected air and ground equipment and procedure changes, a description of a NASA human-machine interface (HMI) prototype for the flight crew that would support PTM operations, and initial benefits analysis results. Additionally, included as appendices, are the following documents: the PTM Operational Services and Environment Definition (OSED) document and a companion "Future Considerations for the Pairwise Trajectory Management (PTM) Concept: Potential Future Updates for the PTM OSED" paper, a detailed description of the PTM algorithm and PTM Limit Mach rules, initial PTM safety requirements and safety assessment documents, a detailed description of the design, development, and initial evaluations of the proposed flight crew HMI, an overview of the methodology and results of PTM pilot training

Improved object optimal synthetic description, modeling, learning, and discrimination by GEOGINE computational kernel

Science.gov (United States)

Fiorini, Rodolfo A.; Dacquino, Gianfranco

2005-03-01

GEOGINE (GEOmetrical enGINE), a state-of-the-art OMG (Ontological Model Generator) based on n-D Tensor Invariants for n-Dimensional shape/texture optimal synthetic representation, description and learning, was presented in previous conferences elsewhere recently. Improved computational algorithms based on the computational invariant theory of finite groups in Euclidean space and a demo application is presented. Progressive model automatic generation is discussed. GEOGINE can be used as an efficient computational kernel for fast reliable application development and delivery in advanced biomedical engineering, biometric, intelligent computing, target recognition, content image retrieval, data mining technological areas mainly. Ontology can be regarded as a logical theory accounting for the intended meaning of a formal dictionary, i.e., its ontological commitment to a particular conceptualization of the world object. According to this approach, "n-D Tensor Calculus" can be considered a "Formal Language" to reliably compute optimized "n-Dimensional Tensor Invariants" as specific object "invariant parameter and attribute words" for automated n-Dimensional shape/texture optimal synthetic object description by incremental model generation. The class of those "invariant parameter and attribute words" can be thought as a specific "Formal Vocabulary" learned from a "Generalized Formal Dictionary" of the "Computational Tensor Invariants" language. Even object chromatic attributes can be effectively and reliably computed from object geometric parameters into robust colour shape invariant characteristics. As a matter of fact, any highly sophisticated application needing effective, robust object geometric/colour invariant attribute capture and parameterization features, for reliable automated object learning and discrimination can deeply benefit from GEOGINE progressive automated model generation computational kernel performance. Main operational advantages over previous

A theoretical relation between the form factor concept and the fractal description of irregularily shaped particles

International Nuclear Information System (INIS)

Naumann, K.H.; Bunz, H.

1994-04-01

This report describes a theoretical concept that establishes a complete link between the form factor characterization and the fractal description of irregularily shaped particles. Of central importance is the approximate consideration of hydrodynamic interactions between the primary particles within the framework of the Kirkwood-Riseman theory, resulting in a clear distinction between the geometric and the hydrodynamic radius of the agglomerates. Furthermore, special attention is given to the description of the density decay in the outer regions of the particles. Using connectivity arguments it is shown that the case of particles with very low fractal dimension (e.g. chainlike species) requires a specific treatment. (orig./HP) [de

Parametric description of the quantum measurement process

Science.gov (United States)

Liuzzo-Scorpo, P.; Cuccoli, A.; Verrucchi, P.

2015-08-01

We present a description of the measurement process based on the parametric representation with environmental coherent states. This representation is specifically tailored for studying quantum systems whose environment needs being considered through the quantum-to-classical crossover. Focusing upon projective measures, and exploiting the connection between large-N quantum theories and the classical limit of related ones, we manage to push our description beyond the pre-measurement step. This allows us to show that the outcome production follows from a global-symmetry breaking, entailing the observed system's state reduction, and that the statistical nature of the process is brought about, together with the Born's rule, by the macroscopic character of the measuring apparatus.

Arx: a toolset for the efficient simulation and direct synthesis of high-performance signal processing algorithms

NARCIS (Netherlands)

Hofstra, K.L.; Gerez, Sabih H.

2007-01-01

This paper addresses the efficient implementation of highperformance signal-processing algorithms. In early stages of such designs many computation-intensive simulations may be necessary. This calls for hardware description formalisms targeted for efficient simulation (such as the programming

Productivity Change, Technical Progress, and Relative Efficiency Change in the Public Accounting Industry

OpenAIRE

Rajiv D. Banker; Hsihui Chang; Ram Natarajan

2005-01-01

We present evidence on components of productivity change in the public accounting industry toward the end of the 20th century. Using revenue and human resource data from 64 of the 100 largest public accounting firms in the United States for the 1995--1999 period, we analyze productivity change, technical progress, and relative efficiency change over time. The average public accounting firm experienced a productivity growth of 9.5% between 1995 and 1999. We find support for the hypothesis that...

Evaluation of the efficiency face to the NO{sub x} emissions from European gas-fired heat process equipment

Energy Technology Data Exchange (ETDEWEB)

Fourniguet, M.J.; Quinqueneau, A. [Gaz de France, Saint-Denis la Plaine (France); Karll, B. [Dansk Gasteknisk Center, Hoersholm (Denmark); Breithaupt, P. Gasunie [Gasunie, Groningue (Netherlands); Jonsson, O. [Svensk Gastekniskt Center AB, Malmoe (Sweden); Navarri, P. [CETIAT, Villeurbanne (France)

1999-10-01

In the frame of the project, tests have been performed by Gaz de France, CETIAT, DGC, GASUNIE and SGC on 35 European industrial sites in order to depict what the European industry using natural gas as an energy source actually looks like in 1997, the levels of efficiency and nitrogen oxides (NOx) emissions currently being achieved. These 35 industrial sites were chosen among the three following sectors: steam or water boilers, engines or turbines and industrial processes (food processing industry, metallurgy, ceramic, paper and textile industries). The partners focused on relatively new installations or newly retrofitted which were equipped with low NOx technologies. To create an open database between the Partners, a common EXCEL sheet has been defined and used to report the results for the three sectors concerned including principally the following items: General background on the site: it includes the description of the installation, technical characteristics of the furnace, the boiler or the engine, operating scenarios, gas total rating, and depending of the type of installation power density, rated electric power or production rate; Description of the equipment: it includes, if available, the control system of the heating equipment and the low NOx techniques identified; Description of the measurement techniques: In order to compensate for the lack of international standard, this part has been particularly detailed. It includes the description of flue gas analysers (CO, CO{sub 2}, O{sub 2}, NOx, CH{sub 4}, UHC, N{sub 2}O, VOC), metering and pressure and temperature probes in terms of measurement principle, supplier, measurement rang and accuracy and gas calibration. It precise the position of the sampling points and the type of the sampling line; Results: The operating conditions (atmospheric data, type of natural gas burnt during the test and measurement period) are given before the results themselves (complete flue gas analysis and determination of combustion

Descriptive and mechanistic models of crop–weed competition

NARCIS (Netherlands)

Bastiaans, L.; Storkey, J.

2017-01-01

Crop-weed competitive relations are an important element of agroecosystems. Quantifying and understanding them helps to design appropriate weed management at operational, tactical and strategic level. This chapter presents and discusses simple descriptive and more mechanistic models for crop-weed

Descriptive set theory

CERN Document Server

Moschovakis, YN

1987-01-01

Now available in paperback, this monograph is a self-contained exposition of the main results and methods of descriptive set theory. It develops all the necessary background material from logic and recursion theory, and treats both classical descriptive set theory and the effective theory developed by logicians.

OGC Geographic Information Service Deductive Semantic Reasoning Based on Description Vocabularies Reduction

Directory of Open Access Journals (Sweden)

MIAO Lizhi

2015-09-01

Full Text Available As geographic information interoperability and sharing developing, more and more interoperable OGC (open geospatial consortium Web services (OWS are generated and published through the internet. These services can facilitate the integration of different scientific applications by searching, finding, and utilizing the large number of scientific data and Web services. However, these services are widely dispersed and hard to be found and utilized with executive semantic retrieval. This is especially true when considering the weak semantic description of geographic information service data. Focusing on semantic retrieval and reasoning of the distributed OWS resources, a deductive and semantic reasoning method is proposed to describe and search relevant OWS resources. Specifically, ①description words are extracted from OWS metadata file to generate GISe ontology-database and instance-database based on geographic ontology according to basic geographic elements category, ②a description words reduction model is put forward to implement knowledge reduction on GISe instance-database based on rough set theory and generate optimized instances database, ③utilizing GISe ontology-database and optimized instance-database to implement semantic inference and reasoning of geographic searching objects is used as an example to demonstrate the efficiency, feasibility and recall ration of the proposed description-word-based reduction model.

Efficiency model of Russian banks

OpenAIRE

Pavlyuk, Dmitry

2006-01-01

The article deals with problems related to the stochastic frontier model of bank efficiency measurement. The model is used to study the efficiency of the banking sector of The Russian Federation. It is based on the stochastic approach both to the efficiency frontier location and to individual bank efficiency values. The model allows estimating bank efficiency values, finding relations with different macro- and microeconomic factors and testing some economic hypotheses.

Energy Efficiency Improvement and Cost Saving Opportunities for the Petrochemical Industry - An ENERGY STAR(R) Guide for Energy and Plant Managers

Energy Technology Data Exchange (ETDEWEB)

Neelis, Maarten; Worrell, Ernst; Masanet, Eric

2008-09-01

Energy is the most important cost factor in the U.S petrochemical industry, defined in this guide as the chemical industry sectors producing large volume basic and intermediate organic chemicals as well as large volume plastics. The sector spent about $10 billion on fuels and electricity in 2004. Energy efficiency improvement is an important way to reduce these costs and to increase predictable earnings, especially in times of high energy price volatility. There are a variety of opportunities available at individual plants in the U.S. petrochemical industry to reduce energy consumption in a cost-effective manner. This Energy Guide discusses energy efficiency practices and energy efficient technologies that can be implemented at the component, process, facility, and organizational levels. A discussion of the trends, structure, and energy consumption characteristics of the petrochemical industry is provided along with a description of the major process technologies used within the industry. Next, a wide variety of energy efficiency measures are described. Many measure descriptions include expected savings in energy and energy-related costs, based on case study data from real-world applications in the petrochemical and related industries worldwide. Typical measure payback periods and references to further information in the technical literature are also provided, when available. The information in this Energy Guide is intended to help energy and plant managers in the U.S. petrochemical industry reduce energy consumption in a cost-effective manner while maintaining the quality of products manufactured. Further research on the economics of all measures--and on their applicability to different production practices--is needed to assess their cost effectiveness at individual plants.

Comparison of Relative Bias, Precision, and Efficiency of Sampling Methods for Natural Enemies of Soybean Aphid (Hemiptera: Aphididae).

Science.gov (United States)

Bannerman, J A; Costamagna, A C; McCornack, B P; Ragsdale, D W

2015-06-01

Generalist natural enemies play an important role in controlling soybean aphid, Aphis glycines (Hemiptera: Aphididae), in North America. Several sampling methods are used to monitor natural enemy populations in soybean, but there has been little work investigating their relative bias, precision, and efficiency. We compare five sampling methods: quadrats, whole-plant counts, sweep-netting, walking transects, and yellow sticky cards to determine the most practical methods for sampling the three most prominent species, which included Harmonia axyridis (Pallas), Coccinella septempunctata L. (Coleoptera: Coccinellidae), and Orius insidiosus (Say) (Hemiptera: Anthocoridae). We show an important time by sampling method interaction indicated by diverging community similarities within and between sampling methods as the growing season progressed. Similarly, correlations between sampling methods for the three most abundant species over multiple time periods indicated differences in relative bias between sampling methods and suggests that bias is not consistent throughout the growing season, particularly for sticky cards and whole-plant samples. Furthermore, we show that sticky cards produce strongly biased capture rates relative to the other four sampling methods. Precision and efficiency differed between sampling methods and sticky cards produced the most precise (but highly biased) results for adult natural enemies, while walking transects and whole-plant counts were the most efficient methods for detecting coccinellids and O. insidiosus, respectively. Based on bias, precision, and efficiency considerations, the most practical sampling methods for monitoring in soybean include walking transects for coccinellid detection and whole-plant counts for detection of small predators like O. insidiosus. Sweep-netting and quadrat samples are also useful for some applications, when efficiency is not paramount. © The Authors 2015. Published by Oxford University Press on behalf of

Analysis of Technical Efficiency among Swamp Rice Farmers in ...

African Journals Online (AJOL)

This study was conducted to evaluate the Technical efficiency among swamp rice farmers in Niger State, Nigeria. A multi-stage sampling technique was used to select 159 swamp rice farmers. The data collected were analysed using descriptive statistics, and the stochastic frontier production function. The results showed ...

The Efficiency of Managing School Records by Secondary School ...

African Journals Online (AJOL)

This study examined the efficiency of management of school records by secondary school principals in Delta state, Nigeria. As a descriptive survey, the study population comprised all the 602 public secondary school principals in the state. A structured questionnaire was used to gather data which was subsequently ...

Natural Gas and CO2 Price Variation: Impact on the Relative Cost-Efficiency of LNG and Pipelines

OpenAIRE

Øverland, Indra; Ulvestad, Marte

2012-01-01

This article develops a formal model for comparing the cost structure of the two main transport options for natural gas: liquefied natural gas (LNG) and pipelines. In particular, it evaluates how variations in the prices of natural gas and greenhouse gas emissions affect the relative cost-efficiency of these two options. Natural gas is often promoted as the most environmentally friendly of all fossil fuels, and LNG as a modern and efficient way of transporting it. Some research has been carri...

Input-output relation and energy efficiency in the neuron with different spike threshold dynamics.

Science.gov (United States)

Yi, Guo-Sheng; Wang, Jiang; Tsang, Kai-Ming; Wei, Xi-Le; Deng, Bin

2015-01-01

Neuron encodes and transmits information through generating sequences of output spikes, which is a high energy-consuming process. The spike is initiated when membrane depolarization reaches a threshold voltage. In many neurons, threshold is dynamic and depends on the rate of membrane depolarization (dV/dt) preceding a spike. Identifying the metabolic energy involved in neural coding and their relationship to threshold dynamic is critical to understanding neuronal function and evolution. Here, we use a modified Morris-Lecar model to investigate neuronal input-output property and energy efficiency associated with different spike threshold dynamics. We find that the neurons with dynamic threshold sensitive to dV/dt generate discontinuous frequency-current curve and type II phase response curve (PRC) through Hopf bifurcation, and weak noise could prohibit spiking when bifurcation just occurs. The threshold that is insensitive to dV/dt, instead, results in a continuous frequency-current curve, a type I PRC and a saddle-node on invariant circle bifurcation, and simultaneously weak noise cannot inhibit spiking. It is also shown that the bifurcation, frequency-current curve and PRC type associated with different threshold dynamics arise from the distinct subthreshold interactions of membrane currents. Further, we observe that the energy consumption of the neuron is related to its firing characteristics. The depolarization of spike threshold improves neuronal energy efficiency by reducing the overlap of Na(+) and K(+) currents during an action potential. The high energy efficiency is achieved at more depolarized spike threshold and high stimulus current. These results provide a fundamental biophysical connection that links spike threshold dynamics, input-output relation, energetics and spike initiation, which could contribute to uncover neural encoding mechanism.

Effective International Medical Disaster Relief: A Qualitative Descriptive Study.

Science.gov (United States)

Broby, Nicolette; Lassetter, Jane H; Williams, Mary; Winters, Blaine A

2018-04-01

Purpose The aim of this study was to assist organizations seeking to develop or improve their medical disaster relief effort by identifying fundamental elements and processes that permeate high-quality, international, medical disaster relief organizations and the teams they deploy. A qualitative descriptive design was used. Data were gathered from interviews with key personnel at five international medical response organizations, as well as during field observations conducted at multiple sites in Jordan and Greece, including three refugee camps. Data were then reviewed by the research team and coded to identify patterns, categories, and themes. The results from this qualitative, descriptive design identified three themes which were key characteristics of success found in effective, well-established, international medical disaster relief organizations. These characteristics were first, ensuring an official invitation had been extended and the need for assistance had been identified. Second, the response to that need was done in an effective and sustainable manner. Third, effective organizations strived to obtain high-quality volunteers. By following the three key characteristics outlined in this research, organizations are more likely to improve the efficiency and quality of their work. In addition, they will be less likely to impede the overall recovery process. Broby N , Lassetter JH , Williams M , Winters BA . Effective international medical disaster relief: a qualitative descriptive study. Prehosp Disaster Med. 2018;33(2):119-126.

Evolving and energy dependent optical model description of heavy-ion elastic scattering

International Nuclear Information System (INIS)

Michaelian, K.

1996-01-01

We present the application of a genetic algorithm to the problem of determining an energy dependent optical model description of heavy-ion elastic scattering. The problem requires a search for the global best optical model potential and its energy dependence in a very rugged 12 dimensional parameter space of complex topographical features with many local minima. Random solutions are created in the first generation. The fitness of a solution is related to the χ 2 fit of the calculated differential cross sections with the experimental data. Best fit solutions are evolved through cross over and mutation following the biological example. This genetic algorithm approach combined with local gradient minimization is shown to provide a global, complete and extremely efficient search method, well adapted to complex fitness landscapes. These characteristics, combined with the facility of application, should make it the search method of choice for a wide variety of problems from nuclear physics. (Author)

Examining the relation between intangible assets and technical efficiency in the international textile and clothing industry

NARCIS (Netherlands)

Kapelko, M.; Oude Lansink, A.G.J.M.

2014-01-01

The resource-based view of the firm suggests that intangible assets have a positive impact on firm performance. This study examined the relation between intangible assets and technical efficiency of textile and clothing firms. A double bootstrap data envelopment analysis approach was used to measure

CIRCUIT IMPLEMENTATION OF VHDL-DESCRIPTIONS OF SYSTEMS OF PARTIAL BOOLEAN FUNCTIONS

Directory of Open Access Journals (Sweden)

P. N. Bibilo

2016-01-01

Full Text Available Method for description of incompletely specified (partial Boolean functions in VHDL is proposed. Examples of synthesized VHDL models of partial Boolean functions are presented; and the results of experiments on circuit implementation of VHDL descriptions of systems of partial functions. The realizability of original partial functions in logical circuits was verified by formal verification. The results of the experiments show that the preliminary minimization in DNF class and in the class of BDD representations for pseudo-random systems of completely specified functions does not improve practically (and in the case of BDD sometimes worsens the results of the subsequent synthesis in the basis of FPGA unlike the significant efficiency of these procedures for the synthesis of benchmark circuits taken from the practice of the design.

The Effects of Teaching Descriptive Geometry in General Engineering 103 on Spatial Relations Tests Scores.

Science.gov (United States)

Stallings, William M.

It was hypothesized that instruction in descriptive geometry produces an increase in SRT scores. The resultant data do not firmly support this hypothesis. It is suggested that this study be replicated with the use of randomly selected control groups. (MS)

International Experience with Key Program Elements of IndustrialEnergy Efficiency or Greenhouse Gas Emissions Reduction Target-SettingPrograms

Energy Technology Data Exchange (ETDEWEB)

Price, Lynn; Galitsky, Christina; Kramer, Klaas Jan

2008-02-02

Target-setting agreements, also known as voluntary ornegotiated agreements, have been used by a number of governments as amechanism for promoting energy efficiency within the industrial sector. Arecent survey of such target-setting agreement programs identified 23energy efficiency or GHG emissions reduction voluntary agreement programsin 18 countries. International best practice related to target-settingagreement programs calls for establishment of a coordinated set ofpolicies that provide strong economic incentives as well as technical andfinancial support to participating industries. The key program elementsof a target-setting program are the target-setting process,identification of energy-saving technologies and measures usingenergy-energy efficiency guidebooks and benchmarking as well as byconducting energy-efficiency audits, development of an energy-savingsaction plan, development and implementation of energy managementprotocols, development of incentives and supporting policies, monitoringprogress toward targets, and program evaluation. This report firstprovides a description of three key target-setting agreement programs andthen describes international experience with the key program elementsthat comprise such programs using information from the three keytarget-setting programs as well as from other international programsrelated to industrial energy efficiency or GHG emissionsreductions.

Irreducible descriptive sets of attributes for information systems

KAUST Repository

Moshkov, Mikhail; Skowron, Andrzej; Suraj, Zbigniew

2010-01-01

. An irreducible descriptive set for the considered information system S is a minimal (relative to the inclusion) set B of attributes which defines exactly the set Ext(S) by means of true and realizable rules constructed over attributes from the considered set B

New reduced-dimensionality models for efficient quantum-mechanical description of ultrafast strong-field phenomena

International Nuclear Information System (INIS)

Silaev, A.A.; Ryabikin, M.Yu.; Vvedenskii, N.V.

2010-01-01

Complete text of publication follows. The development of theoretical approaches to the description of strong-field phenomena caused by ultrashort laser pulses is optical for studying the interaction of atoms and molecules with intense laser fields. In this work, we address two phenomena which attract much attention and can be observed under similar experimental conditions, namely, when a gas is ionized by ultrashort laser pulse. The first phenomenon is the excitation of high-order harmonics of the driving field frequency in the electron current, which leads to the generation of vacuum ultraviolet and soft X-ray radiation, as well as the attosecond pulse production. The second phenomenon is the excitation of a quasi-dc residual current in the laser-produced plasma, which results in the generation of radiation having a frequency below the laser one, e.g., terahertz waves. We present new one-dimensional (1D) and two-dimensional (2D) quantum-mechanical models for the description of such phenomena for the case a hydrogen (H) atom, and the generalization of these models to the case of various noble-gas atoms. The shape of the electrostatic potential produced by an atomic ion is shown to influence significantly the rates of the processes in the dynamics of atomic electron, and even more, the rates of the tunneling and above-barrier ionization, which is of utmost importance for the considered phenomena. The results of solving the time-dependent Schroedinger equation with the 1D and 2D potentials, which we propose, are compared with the results of the ab initio three-dimensional calculations for the H atom. We find the regions of laser pulse parameters, where the results obtained with proposed models have much better accuracy than the results provided by the models used earlier. Acknowledgements. This work was supported by the Russian Foundation for Basic Research, the Presidential Council on Grants of the Russian Federation, the Ministry of Education and Science of the

Thermoluminescent relative efficiencies of TLD-100 for nitrogen ions respect of gamma radiation

International Nuclear Information System (INIS)

Concha S, K.; Avila, O.; Gamboa de Buen, I.; Rodriguez V, M.; Buenfil, A.E.; Ruiz T, C.; Brandan, M.E.

2004-01-01

The purpose of this work is to measure the thermoluminescent relative efficiency of those TLD-100 dosemeters irradiated with nitrogen ions with respect to the gamma radiation of 60 Co, in function of the linear energy transfer (LET). Two energy of such nitrogen ions were selected that has the same value from LET when impacting in the dosemeters but with E 1 energy (4.8 MeV) and E 2 (9.95 MeV) smaller and greater respectively that the energy of the Bragg peak. (Author)

Phosphorus Acquisition Efficiency Related to Root Traits: Is Mycorrhizal Symbiosis a Key Factor to Wheat and Barley Cropping?

Science.gov (United States)

Campos, Pedro; Borie, Fernando; Cornejo, Pablo; López-Ráez, Juan A.; López-García, Álvaro; Seguel, Alex

2018-01-01

Wheat (Triticum aestivum L.) and barley (Hordeum vulgare L.) are major crops cultivated around the world, thus playing a crucial role on human diet. Remarkably, the growing human population requires a significant increase in agricultural production in order to feed everybody. In this context, phosphorus (P) management is a key factor as it is component of organic molecules such as nucleic acids, ATP and phospholipids, and it is the most abundant macronutrient in biomass after nitrogen (N), although being one of the scarcest elements in the lithosphere. In general, P fertilization has low efficiency, as only a fraction of the applied P is acquired by roots, leaving a substantial amount to be accumulated in soil as not readily available P. Breeding for P-efficient cultivars is a relatively low cost alternative and can be done through two mechanisms: i) improving P use efficiency (PUE), and/or ii) P acquisition efficiency (PAE). PUE is related to the internal allocation/mobilization of P, and is usually represented by the amount of P accumulated per biomass. PAE relies on roots ability to acquire P from the soil, and is commonly expressed as the relative difference of P acquired under low and high P availability conditions. In this review, plant adaptations related to improved PAE are described, with emphasis on arbuscular mycorrhizal (AM) symbiosis, which is generally accepted to enhance plant P acquisition. A state of the art (1980–2018) of AM growth responses and P uptake in wheat and barley is made to discuss about the commonly accepted growth promoting effect and P increased uptake by AM fungi and the contrasting evidence about the generally accepted lack of positive responses in both plant species. Finally, the mechanisms by which AM symbiosis can affect wheat and barley PAE are discussed, highlighting the importance of considering AM functional diversity on future studies and the necessity to improve PAE definition by considering the carbon trading between

An Efficient Quality-Related Fault Diagnosis Method for Real-Time Multimode Industrial Process

Directory of Open Access Journals (Sweden)

Kaixiang Peng

2017-01-01

Full Text Available Focusing on quality-related complex industrial process performance monitoring, a novel multimode process monitoring method is proposed in this paper. Firstly, principal component space clustering is implemented under the guidance of quality variables. Through extraction of model tags, clustering information of original training data can be acquired. Secondly, according to multimode characteristics of process data, the monitoring model integrated Gaussian mixture model with total projection to latent structures is effective after building the covariance description form. The multimode total projection to latent structures (MTPLS model is the foundation of problem solving about quality-related monitoring for multimode processes. Then, a comprehensive statistics index is defined which is based on the posterior probability of the monitored samples belonging to each Gaussian component in the Bayesian theory. After that, a combined index is constructed for process monitoring. Finally, motivated by the application of traditional contribution plot in fault diagnosis, a gradient contribution rate is applied for analyzing the variation of variable contribution rate along samples. Our method can ensure the implementation of online fault monitoring and diagnosis for multimode processes. Performances of the whole proposed scheme are verified in a real industrial, hot strip mill process (HSMP compared with some existing methods.

A Note on the Field-Theoretical Description of Superfluids

CERN Document Server

Andrianopoli, L; Grassi, P A; Trigiante, M

2014-01-01

Recently, a Lagrangian description of superfluids attracted some interest from the fluid/gravity-correspondence viewpoint. In this respect, the work of Dubovksy et al. has proposed a new field theoretical description of fluids, which has several interesting aspects. On another side, we have provided in arXiv:1304.2206 a supersymmetric extension of the original works. In the analysis of the Lagrangian structures a new invariant appeared which, although related to known invariants, provides, in our opinion, a better parametrisation of the fluid dynamics in order to describe the fluid/superfluid phases.

How did rehabilitation professionals act when faced with the Great East Japan earthquake and disaster? Descriptive epidemiology of disability and an interim report of the relief activities of the ten Rehabilitation-Related Organizations.

OpenAIRE

Liu, Meigen; Kohzuki, Masahiro; Hamamura, Akinori; Ishikawa, Makoto; Saitoh, Masami; Kurihara, Masaki; Handa, Kazuto; Nakamura, Haruki; Fukaura, Junichi; Kimura, Ryuji; Ito, Takao; Matsuzaka, Nobuou

2012-01-01

Objective: Inter-organizational coordination is important for rehabilitation disaster relief. The 2011 Great East Japan Earthquake and Disaster was unprecedented, being geographically widespread and multifaceted. Faced with the crisis, rehabilitation professionals established the 10 Rehabilitation- Related Organizations of Rehabilitation Support Service (10-RRO). The objectives of this paper are to provide descriptive epidemiology and assess the activities of 10- RRO. Design: Descriptive. Met...

A hitchhiker's guide to the older literature of descriptive teratology.

Science.gov (United States)

Beckwith, J Bruce

2007-12-15

Though relatively neglected in the age of molecular biology, the older literature of teratology includes superb illustrations and descriptions of malformations, and other information of permanent value to science and medicine. Accessing that literature can be challenging, as most is in works that are rare, published in languages other than English, and not available in digital form. This article describes some valuable sources of information concerning the antiquarian literature of descriptive teratology. (c) 2007 Wiley-Liss, Inc.

Energy Efficiency Improvement and Cost Saving Opportunities for the Fruit and Vegetable Processing Industry. An ENERGY STAR Guide for Energy and Plant Managers

Energy Technology Data Exchange (ETDEWEB)

Masanet, Eric; Masanet, Eric; Worrell, Ernst; Graus, Wina; Galitsky, Christina

2008-01-01

The U.S. fruit and vegetable processing industry--defined in this Energy Guide as facilities engaged in the canning, freezing, and drying or dehydrating of fruits and vegetables--consumes over $800 million worth of purchased fuels and electricity per year. Energy efficiency improvement isan important way to reduce these costs and to increase predictable earnings, especially in times of high energy price volatility. There are a variety of opportunities available at individual plants in the U.S. fruit and vegetable processing industry to reduce energy consumption in a cost-effective manner. This Energy Guide discusses energy efficiency practices and energy-efficient technologies that can be implemented at the component, process, facility, and organizational levels. A discussion of the trends, structure, and energy consumption characteristics of the U.S. fruit and vegetable processing industry is provided along with a description of the major process technologies used within the industry. Next, a wide variety of energy efficiency measures applicable to fruit and vegetable processing plants are described. Many measure descriptions include expected savings in energy and energy-related costs, based on case study data from real-world applications in fruit and vegetable processing facilities and related industries worldwide. Typical measure payback periods and references to further information in the technical literature are also provided, when available. Given the importance of water in fruit and vegetable processing, a summary of basic, proven measures for improving plant-level water efficiency are also provided. The information in this Energy Guide is intended to help energy and plant managers in the U.S. fruit and vegetable processing industry reduce energy and water consumption in a cost-effective manner while maintaining the quality of products manufactured. Further research on the economics of all measures--as well as on their applicability to different production

Efficient modeling of chiral media using SCN-TLM method

Directory of Open Access Journals (Sweden)

Yaich M.I.

2004-01-01

Full Text Available An efficient approach allowing to include linear bi-isotropic chiral materials in time-domain transmission line matrix (TLM calculations by employing recursive evaluation of the convolution of the electric and magnetic fields and susceptibility functions is presented. The new technique consists to add both voltage and current sources in supplementary stubs of the symmetrical condensed node (SCN of the TLM method. In this article, the details and the complete description of this approach are given. A comparison of the obtained numerical results with those of the literature reflects its validity and efficiency.

Focused Crawling of the Deep Web Using Service Class Descriptions

Energy Technology Data Exchange (ETDEWEB)

Rocco, D; Liu, L; Critchlow, T

2004-06-21

Dynamic Web data sources--sometimes known collectively as the Deep Web--increase the utility of the Web by providing intuitive access to data repositories anywhere that Web access is available. Deep Web services provide access to real-time information, like entertainment event listings, or present a Web interface to large databases or other data repositories. Recent studies suggest that the size and growth rate of the dynamic Web greatly exceed that of the static Web, yet dynamic content is often ignored by existing search engine indexers owing to the technical challenges that arise when attempting to search the Deep Web. To address these challenges, we present DynaBot, a service-centric crawler for discovering and clustering Deep Web sources offering dynamic content. DynaBot has three unique characteristics. First, DynaBot utilizes a service class model of the Web implemented through the construction of service class descriptions (SCDs). Second, DynaBot employs a modular, self-tuning system architecture for focused crawling of the DeepWeb using service class descriptions. Third, DynaBot incorporates methods and algorithms for efficient probing of the Deep Web and for discovering and clustering Deep Web sources and services through SCD-based service matching analysis. Our experimental results demonstrate the effectiveness of the service class discovery, probing, and matching algorithms and suggest techniques for efficiently managing service discovery in the face of the immense scale of the Deep Web.

A Calibrated Lumped Element Model for the Prediction of PSJ Actuator Efficiency Performance

Directory of Open Access Journals (Sweden)

Matteo Chiatto

2018-03-01

Full Text Available Among the various active flow control techniques, Plasma Synthetic Jet (PSJ actuators, or Sparkjets, represent a very promising technology, especially because of their high velocities and short response times. A practical tool, employed for design and manufacturing purposes, consists of the definition of a low-order model, lumped element model (LEM, which is able to predict the dynamic response of the actuator in a relatively quick way and with reasonable fidelity and accuracy. After a brief description of an innovative lumped model, this work faces the experimental investigation of a home-designed and manufactured PSJ actuator, for different frequencies and energy discharges. Particular attention has been taken in the power supply system design. A specific home-made Pitot tube has allowed the detection of velocity profiles along the jet radial direction, for various energy discharges, as well as the tuning of the lumped model with experimental data, where the total device efficiency has been assumed as a fitting parameter. The best fitting value not only contains information on the actual device efficiency, but includes some modeling and experimental uncertainties, related also to the used measurement technique.

Stimulating energy-efficient innovations in the Dutch building sector: Empirical evidence from patent counts and policy lessons

International Nuclear Information System (INIS)

Noailly, Joelle; Batrakova, Svetlana

2010-01-01

In the Netherlands where the building sector accounts for 33% of carbon emissions, the government aims to halve the total energy use from buildings by 2030 compared to 1990 levels. To this end, the Dutch government has set specific goals in order to foster technological innovation related to energy efficiency in buildings. The objective of this paper is to explore the links between technological innovation and public policies in this sector over the last 30 years. The paper aims (1) to measure the evolution of innovations related to energy efficiency in buildings in the Netherlands using patent counts and (2) to provide a historical overview of the policy framework. Descriptive data on patenting activities show that the Netherlands have a clear comparative advantage in the field of energy-saving lighting technologies, mainly due to intensive patenting activities by Philips. High-efficiency boilers also represent a substantial share of Dutch innovation activities in this domain over the last decades. In many other fields (such as insulation, heat-pumps and cogeneration, solar boilers, etc.), however, Germany, Austria and Scandinavian countries rank much higher than the Netherlands. The descriptive analysis of Dutch energy policy shows an intensification of energy policy in the mid-1990s, followed by a slight decline after 2001. Overall, the simultaneous introduction of policy instruments makes it difficult to evaluate the effectiveness of policies. Also, the policy framework is characterized by the introduction of a large number of short-lived policy instruments and frequent policy changes. The lack of stability and continuity of energy policy may be damaging for innovation. - Research Highlights: →The Netherlands are a top innovative country in the field of energy-efficient innovations for buildings, mainly due to high patenting activities by Philips in energy-saving lighting technologies. →In many other fields (insulation, heat-pumps, etc) Germany, Austria and

Confrontation (A Human Relations Training Unit and Simulation Game for Teacher and Administrators in a Multi-Ethnic Elementary and High School). Description of Teacher Inservice Education Materials.

Science.gov (United States)

National Education Association, Washington, DC. Project on Utilization of Inservice Education R & D Outcomes.

The inservice teacher and administrator education program described here is intended to make teachers aware of the problems they may encounter in a multicultural, multiethnic school setting. The inservice topic is human relations, with the subject of black/white confrontation the main focus. This descriptive report provides additional information…

Volatile decision dynamics: experiments, stochastic description, intermittency control and traffic optimization

Science.gov (United States)

Helbing, Dirk; Schönhof, Martin; Kern, Daniel

2002-06-01

The coordinated and efficient distribution of limited resources by individual decisions is a fundamental, unsolved problem. When individuals compete for road capacities, time, space, money, goods, etc, they normally make decisions based on aggregate rather than complete information, such as TV news or stock market indices. In related experiments, we have observed a volatile decision dynamics and far-from-optimal payoff distributions. We have also identified methods of information presentation that can considerably improve the overall performance of the system. In order to determine optimal strategies of decision guidance by means of user-specific recommendations, a stochastic behavioural description is developed. These strategies manage to increase the adaptibility to changing conditions and to reduce the deviation from the time-dependent user equilibrium, thereby enhancing the average and individual payoffs. Hence, our guidance strategies can increase the performance of all users by reducing overreaction and stabilizing the decision dynamics. These results are highly significant for predicting decision behaviour, for reaching optimal behavioural distributions by decision support systems and for information service providers. One of the promising fields of application is traffic optimization.

Analysis of laparoscopic port site complications: A descriptive study.

Science.gov (United States)

Karthik, Somu; Augustine, Alfred Joseph; Shibumon, Mundunadackal Madhavan; Pai, Manohar Varadaraya

2013-04-01

The rate of port site complications following conventional laparoscopic surgery is about 21 per 100,000 cases. It has shown a proportional rise with increase in the size of the port site incision and trocar. Although rare, complications that occur at the port site include infection, bleeding, and port site hernia. To determine the morbidity associated with ports at the site of their insertion in laparoscopic surgery and to identify risk factors for complications. Prospective descriptive study. In the present descriptive study, a total of 570 patients who underwent laparoscopic surgeries for various ailments between August 2009 and July 2011 at our institute were observed for port site complications prospectively and the complications were reviewed. Descriptive statistical analysis was carried out in the present study. The statistical software, namely, SPSS 15.0 was used for the analysis of the data. Of the 570 patients undergoing laparoscopic surgery, 17 (3%) had developed complications specifically related to the port site during a minimum follow-up of three months; port site infection (PSI) was the most frequent (n = 10, 1.8%), followed by port site bleeding (n = 4, 0.7%), omentum-related complications (n = 2; 0.35%), and port site metastasis (n = 1, 0.175%). Laparoscopic surgeries are associated with minimal port site complications. Complications are related to the increased number of ports. Umbilical port involvement is the commonest. Most complications are manageable with minimal morbidity, and can be further minimized with meticulous surgical technique during entry and exit.

Description of carcass classification goals and the current situation in South Africa

OpenAIRE

Webb, E.C.

2015-01-01

Carcass classification is an essential part of efficient animal production, price fixing and meeting consumer demands. Carcass classification (or grading) is based on the description of carcasses by means of clearly defined characteristics that are of prime importance to the meat industry, retailers and consumers. Significant variation exists in carcass composition and quality due to the effects of species, age, maturity type, sex and interaction effects with animal production systems. A numb...

On the nuclear double beta decay: microscopic description

International Nuclear Information System (INIS)

Civitarese, Osvaldo

1989-01-01

This paper is devoted to the discussion of some problems related with microscopic descriptions of the nuclear double beta decay. It has been organized in the following order: 1) Review of the experimental situation; 2) Brief discussion of the theoretical aspects related to the current algebra, weak interaction, neutrino and majoron's status and 3) Elements of the standard nuclear theory involved in the calculation of transition densities for the nuclear double beta decay. (Author) [es

Nitrogen use efficiency (NUE)

NARCIS (Netherlands)

Oenema, O.

2015-01-01

There is a need for communications about resource use efficiency and for measures to increase the use efficiency of nutrients in relation to food production. This holds especially for nitrogen. Nitrogen (N) is essential for life and a main nutrient element. It is needed in relatively large

A descriptive study of culture related terms in translation of Harry Potter Novel from English to Urdu language

Directory of Open Access Journals (Sweden)

Sana Mansoor

2016-05-01

Full Text Available Translation of children fantasy novels and problems faced by translators in translating these novels into different languages is one of the core issues in the field of translation studies. This issue has got attention of many researchers and an extensive study has been carried out on various novels. The Harry Potter series of novels written by British author J.K. Rowling is one of the famous children fantasy novels that gained popularity worldwide and was translated into 73 languages. The use of various cultural terms and made up words in the novel has posed a great challenge for the translators. The purpose of the present study is to identify these cultural related terms and made up words in the novel “Harry Potter and the Chamber of Secrets” and to investigate the strategies used by the translator in translating them into Urdu language. A descriptive analysis of the translation of culture related items and made up words was made using the strategies proposed by Davies (2003. The findings of this research showed that translator mostly emphasized and predominantly used localization and transformation strategies for food items, magical objects and imaginative words.

Direct waste heat recovery via thermoelectric materials - chosen issues of the thermodynamic description

International Nuclear Information System (INIS)

Kolasiński, Piotr; Kolasińska, Ewa

2016-01-01

The effective waste heat recovery is one of the present-day challenges in the industry and power engineering. The energy systems dedicated for waste heat conversion into electricity are usually characterized by low efficiency and are complicated in the design. The possibility of waste heat recovery via thermoelectric materials may be an interesting alternative to the currently used technologies. In particular, due to their material characteristics, conducting polymers may be competitive when compared with the power machinery and equipment. These materials can be used in a wide range of the geometries e.g. the bulk products, thin films, pristine form or composites and the others. In this article, the authors present selected issues related to the mathematical and thermodynamic description of the heat transfer processes in the thermoelectric materials dedicated for the waste heat recovery. The link of these models with electrical properties of the material and a material solution based on a conducting polymer have also been presented in this paper. (paper)

Tolerance analysis on diffraction efficiency and polychromatic integral diffraction efficiency for harmonic diffractive optics

Science.gov (United States)

Shan, Mao

2016-10-01

In this dissertation, the mathematical model of effect of manufacturing errors including microstructure relative height error and relative width error on diffraction efficiency for the harmonic diffractive optical elements (HDEs) is set up. According to the expression of the phase delay and diffraction efficiency of the HDEs, the expression of diffraction efficiency of refraction and diffractive optical element with the microstructure height and periodic width errors in fabrication process is presented in this paper. Furthermore, the effect of manufacturing errors on diffraction efficiency for the harmonic diffractive optical elements is studied, and diffraction efficiency change is analyzed as the relative microstructure height-error in the same and in the opposite sign as well as relative width-error in the same and in the opposite sign. Example including infrared wavelength with materials GE has been discussed in this paper. Two kinds of manufacturing errors applied in 3.7 4.3um middle infrared and 8.7-11.5um far infrared optical system which results in diffraction efficiency and PIDE of HDEs are studied. The analysis results can be used for manufacturing error control in micro-structure height and periodic width. Results can be used for HDEs processing.

Absolute versus Relative Environmental Sustainability: What can the Cradle-to-Cradle and Eco-efficiency Concepts Learn from Each Other?

DEFF Research Database (Denmark)

Bjørn, Anders; Hauschild, Michael Zwicky

2013-01-01

The cradle-to-cradle (C2C) concept has emerged as an alternative to the more established eco-efficiency concept based on life cycle assessment (LCA). The two concepts differ fundamentally in that eco-efficiency aims to reduce the negative environmental footprint of human activities while C2C...... attempts to increase the positive footprint. This article discusses the strengths and weaknesses of each concept and suggests how they may learn from each other. The eco-efficiency concept involves no long-term vision or strategy, the links between resource consumption and waste emissions are not well...... related to the sustainability state, and increases in eco-efficiency may lead to increases in consumption levels and hence overall impact. The C2C concept's disregard for energy efficiency means that many current C2C products will likely not perform well in an LCA. Inherent drawbacks are restrictions...

Morphonological Description of Relative Morphemes in Standard ...

African Journals Online (AJOL)

The theoretical framework that has been used in this analysis is Generative Phonology as stipulated by Chomsky and Halle in their book called Sound Pattern of English (SPE) of 1968. I have considered that relative morpheme forms are the result of two different formatives, which are O- of reference (O-ref.) and the Subject ...

Method of relative comparison of the thermohydraulic efficiency of heat exchange intensification in channels of heat-exchange surfaces

International Nuclear Information System (INIS)

Dubrovskij, E.V.; Vasil'ev, V.Ya.

2002-01-01

One introduces a technique to compare relatively thermohydraulic efficiency of heat transfer intensification in channels of heat exchange surfaces of any design types. It is shown that one should compare thermohydraulic efficiency of heat exchange intensification as to the thermal power of heat exchangers and pressure losses in channels with turbulators and in polished channels of heat exchange surfaces on the basis of dimensions of heat exchangers, their heat exchange surfaces and at similar (as to Re numbers) modes of coolant flow [ru

Description logics of context

CSIR Research Space (South Africa)

Klarman, S

2013-05-01

Full Text Available We introduce Description Logics of Context (DLCs) - an extension of Description Logics (DLs) for context-based reasoning. Our approach descends from J. McCarthy's tradition of treating contexts as formal objects over which one can quantify...

Improved description of metal oxide stability

DEFF Research Database (Denmark)

Jauho, Thomas Stenbæk; Olsen, Thomas; Bligaard, Thomas

2015-01-01

The renormalized adiabatic PBE (rAPBE) method has recently been shown to comprise a significant improvement over the random phase approximation (RPA) for total energy calculations of simple solids and molecules. Here we consider the formation energies of 19 group I and II metal oxides and a few...... transition-metal oxides. The mean absolute error relative to experiments is 0.21 eV and 0.38 eV per oxygen atom for rAPBE and RPA, respectively, and thus the rAPBE method greatly improves the description of metal-oxygen bonds across a wide range of oxides. The failure of the RPA can be partly attributed...... to the lack of error cancellation between the correlation energy of the oxide on the one hand and the bulk metal and oxygen molecule on the other hand, which are all separately predicted much too negative by the RPA. We ascribe the improved performance of the rAPBE to its significantly better description...

A constitutive description of the thermo-viscoplastic behavior of body-centered cubic metals

International Nuclear Information System (INIS)

Gao, C.Y.; Lu, W.R.; Zhang, L.C.; Yan, H.X.

2012-01-01

Highlights: ► Established a new physics-based constitutive model for the plasticity of BCC crystals. ► The new model is better than the R–K, Abed, Z–A and J–C models. ► The new model is simpler and easier to use than the original MTS model. ► The material parameters are determined by a global optimization algorithm. ► Provided a precise description of the flow stress of HSLA-65 steel as well as Tantalum. -- Abstract: The Johnson–Cook (J–C) equation, which is obtained from the phenomenological observations of experimental data at relatively low strain rates, cannot well describe the dynamic thermo-mechanical response of many materials at high strain rates, especially under the situations of high or low temperatures. This paper develops a new physics-based model for the constitutive description of BCC metals through a thermal activation analysis of the dislocation motion in the plastic deformation of crystalline materials with the use of the mechanical threshold stress (MTS) as an internal state variable. It was found that the new model can effectively reflect the plastic deformation mechanism of BCC crystals because it directly relates the macroscopic state variables in the constitutive model with the micromechanical characteristics of materials. The material parameters of the model are efficiently determined by an optimization method to guarantee that the material parameters are globally optimal in their theoretically allowed ranges. The application of the model to HSLA-65 steel and Tantalum shows that it is much easier to apply than the MTS model, that its flow stress predictions are better than the Rusinek and Klepaczko (R–K), Abed, Zerilli and Armstrong (Z–A) and J–C models, and that the present model predictions are in good agreement with the experimental data in a broad range of strain rate, temperature and strain.

Numerical multistep methods for the efficient solution of quantum mechanics and related problems

International Nuclear Information System (INIS)

Anastassi, Z.A.; Simos, T.E.

2009-01-01

In this paper we present the recent development in the numerical integration of the Schroedinger equation and related systems of ordinary differential equations with oscillatory solutions, such as the N-body problem. We examine several types of multistep methods (explicit, implicit, predictor-corrector, hybrid) and several properties (P-stability, trigonometric fitting of various orders, phase fitting, high phase-lag order, algebraic order). We analyze the local truncation error and the stability of the methods. The error for the Schroedinger equation is also presented, which reveals the relation of the error to the energy. The efficiency of the methods is evaluated through the integration of five problems. Figures are presented and analyzed and some general conclusions are made. Code written in Maple is given for the development of all methods analyzed in this paper. Also the subroutines written in Matlab, that concern the integration of the methods, are presented.

Active Vertex Model for cell-resolution description of epithelial tissue mechanics.

Science.gov (United States)

Barton, Daniel L; Henkes, Silke; Weijer, Cornelis J; Sknepnek, Rastko

2017-06-01

We introduce an Active Vertex Model (AVM) for cell-resolution studies of the mechanics of confluent epithelial tissues consisting of tens of thousands of cells, with a level of detail inaccessible to similar methods. The AVM combines the Vertex Model for confluent epithelial tissues with active matter dynamics. This introduces a natural description of the cell motion and accounts for motion patterns observed on multiple scales. Furthermore, cell contacts are generated dynamically from positions of cell centres. This not only enables efficient numerical implementation, but provides a natural description of the T1 transition events responsible for local tissue rearrangements. The AVM also includes cell alignment, cell-specific mechanical properties, cell growth, division and apoptosis. In addition, the AVM introduces a flexible, dynamically changing boundary of the epithelial sheet allowing for studies of phenomena such as the fingering instability or wound healing. We illustrate these capabilities with a number of case studies.

Software development for efficient description of FIR filters of wireless LAN systems, in VHDL

OpenAIRE

Καινούργιος, Σωτήριος

2005-01-01

Υλοποίηση παραμετροποιημένων FIR φίλτρων με την βοήθεια της γλώσσας περιγραφής υλικού VHDL. Μελέτη των αποτελεσμάτων για χώρο και περιοχή που καταλαμβάνει ο σχεδιαμσός. FIR implementation with the description language VHDL. We discuss their results for area and the delay of each diagram (FIR filter).

Preliminary Cluster Size and Efficiencies results of CMS RPC at GIF++

CERN Document Server

Gonzalez Blanco Gonzalez, Genoveva

2016-01-01

A brief description and first preliminary results of the Efficiencies and Cluster Size measurements of the CMS Resistive Plate Chambers, will be presented inside the Gamma Irradiation Facility GIF++ at CERN. Preliminary studies that sets the base performance measurements of CMS RPC for starting aging studies.

A report to Congress on Nuclear Regulatory research: Project descriptions for FY87

International Nuclear Information System (INIS)

1987-02-01

The report presents project descriptions of NRC research projects funded in Fiscal Year 1987. The individual project descriptions presented in this report are divided into six major groups of related projects. These groups, called issues, are as follows: Severe Accident, Risk and Reliability, Thermal Hydraulic Transients, Plant Aging and Life Extension, Seismic Research, and Waste Management. Within each issue, the project descriptions are further divided into subgroups, called subissues. An overview is provided prior to each issue and subissue giving a statement of the problem being addressed and the research objectives

Description of a stable scheme for steady-state coupled Monte Carlo–thermal–hydraulic calculations

International Nuclear Information System (INIS)

Dufek, Jan; Eduard Hoogenboom, J.

2014-01-01

Highlights: • A stable coupling scheme for steady-state MC–TH calculations is described. • The coupling scheme is based on the stochastic approximation method. • The neutron flux (or power) distribution is relaxed using a variable step-size. - Abstract: We provide a detailed description of a numerically stable and efficient coupling scheme for steady-state Monte Carlo neutronic calculations with thermal–hydraulic feedback. While we have previously derived and published the stochastic approximation based method for coupling the Monte Carlo criticality and thermal–hydraulic calculations, its possible implementation has not been described in a step-by-step manner. As the simple description of the coupling scheme was repeatedly requested from us, we have decided to make it available via this note

Non-Markovian quantum processes: Complete framework and efficient characterization

Science.gov (United States)

Pollock, Felix A.; Rodríguez-Rosario, César; Frauenheim, Thomas; Paternostro, Mauro; Modi, Kavan

2018-01-01

Currently, there is no systematic way to describe a quantum process with memory solely in terms of experimentally accessible quantities. However, recent technological advances mean we have control over systems at scales where memory effects are non-negligible. The lack of such an operational description has hindered advances in understanding physical, chemical, and biological processes, where often unjustified theoretical assumptions are made to render a dynamical description tractable. This has led to theories plagued with unphysical results and no consensus on what a quantum Markov (memoryless) process is. Here, we develop a universal framework to characterize arbitrary non-Markovian quantum processes. We show how a multitime non-Markovian process can be reconstructed experimentally, and that it has a natural representation as a many-body quantum state, where temporal correlations are mapped to spatial ones. Moreover, this state is expected to have an efficient matrix-product-operator form in many cases. Our framework constitutes a systematic tool for the effective description of memory-bearing open-system evolutions.

Analysis of laparoscopic port site complications: A descriptive study

Directory of Open Access Journals (Sweden)

Somu Karthik

2013-01-01

Full Text Available Context: The rate of port site complications following conventional laparoscopic surgery is about 21 per 100,000 cases. It has shown a proportional rise with increase in the size of the port site incision and trocar. Although rare, complications that occur at the port site include infection, bleeding, and port site hernia. Aims: To determine the morbidity associated with ports at the site of their insertion in laparoscopic surgery and to identify risk factors for complications. Settings and Design: Prospective descriptive study. Materials and Methods: In the present descriptive study, a total of 570 patients who underwent laparoscopic surgeries for various ailments between August 2009 and July 2011 at our institute were observed for port site complications prospectively and the complications were reviewed. Statistical Analysis Used: Descriptive statistical analysis was carried out in the present study. The statistical software, namely, SPSS 15.0 was used for the analysis of the data. Results: Of the 570 patients undergoing laparoscopic surgery, 17 (3% had developed complications specifically related to the port site during a minimum follow-up of three months; port site infection (PSI was the most frequent (n = 10, 1.8%, followed by port site bleeding (n = 4, 0.7%, omentum-related complications (n = 2; 0.35%, and port site metastasis (n = 1, 0.175%. Conclusions: Laparoscopic surgeries are associated with minimal port site complications. Complications are related to the increased number of ports. Umbilical port involvement is the commonest. Most complications are manageable with minimal morbidity, and can be further minimized with meticulous surgical technique during entry and exit.

Analysis of laparoscopic port site complications: A descriptive study

Science.gov (United States)

Karthik, Somu; Augustine, Alfred Joseph; Shibumon, Mundunadackal Madhavan; Pai, Manohar Varadaraya

2013-01-01

CONTEXT: The rate of port site complications following conventional laparoscopic surgery is about 21 per 100,000 cases. It has shown a proportional rise with increase in the size of the port site incision and trocar. Although rare, complications that occur at the port site include infection, bleeding, and port site hernia. AIMS: To determine the morbidity associated with ports at the site of their insertion in laparoscopic surgery and to identify risk factors for complications. SETTINGS AND DESIGN: Prospective descriptive study. MATERIALS AND METHODS: In the present descriptive study, a total of 570 patients who underwent laparoscopic surgeries for various ailments between August 2009 and July 2011 at our institute were observed for port site complications prospectively and the complications were reviewed. STATISTICAL ANALYSIS USED: Descriptive statistical analysis was carried out in the present study. The statistical software, namely, SPSS 15.0 was used for the analysis of the data. RESULTS: Of the 570 patients undergoing laparoscopic surgery, 17 (3%) had developed complications specifically related to the port site during a minimum follow-up of three months; port site infection (PSI) was the most frequent (n = 10, 1.8%), followed by port site bleeding (n = 4, 0.7%), omentum-related complications (n = 2; 0.35%), and port site metastasis (n = 1, 0.175%). CONCLUSIONS: Laparoscopic surgeries are associated with minimal port site complications. Complications are related to the increased number of ports. Umbilical port involvement is the commonest. Most complications are manageable with minimal morbidity, and can be further minimized with meticulous surgical technique during entry and exit. PMID:23741110

Combinatorial description of space and strong interactions

International Nuclear Information System (INIS)

Zenczykowski, P.

1988-01-01

A reinterpretation is given of a successful phenomenological approach to hadron self-energy effects known as the unitarized quark model. General arguments are given that the proper description of strong interactions may require abandoning the assignment of a primary role to continuous concepts such as position and momentum in favor of discrete ones such as spin or W-spin. The reinterpretation exploits an analogy between the W-spin diagrams occurring in the calculations of hadronic loop effects and the spin network idea of Penrose. A connection between the S-matrix approach to hadron masses and the purely algebraic approach characteristic of the quark model is indicated. Several hadron mass relations generated by a resulting SU(6)/sub w/-group-theoretic expression are presented and discussed. Results of an attempt to generalize the scheme to the description of hadron vertices are reported

Hydrogen electrode reaction: A complete kinetic description

International Nuclear Information System (INIS)

Quaino, P.M.; Gennero de Chialvo, M.R.; Chialvo, A.C.

2007-01-01

The kinetic description of the hydrogen electrode reaction (HER) in the whole range of overpotentials (-0.2 < η (V) < 0.40) is presented. The Volmer-Heyrovsky-Tafel mechanism was solved considering simultaneously the following items: (i) the diffusional contribution of the molecular hydrogen from and towards the electrode surface, (ii) the forward and backward reaction rates of each elementary step and (iii) a Frumkin type adsorption for the reaction intermediate. In order to verify the descriptive capability of the kinetic expressions derived, an experimental study of the HER was carried out on a rotating platinum disc electrode in acid solution. From the correlation of these results the elementary kinetic parameters were evaluated and several aspects related to the kinetic mechanism were discussed. Finally, the use of these kinetic expressions to interpret results obtained on microelectrodes is also analysed

A Descriptive Study of Registers Found in Spoken and Written Communication (A Semantic Analysis

Directory of Open Access Journals (Sweden)

Nurul Hidayah

2016-07-01

Full Text Available This research is descriptive study of registers found in spoken and written communication. The type of this research is Descriptive Qualitative Research. In this research, the data of the study is register in spoken and written communication that are found in a book entitled "Communicating! Theory and Practice" and from internet. The data can be in the forms of words, phrases and abbreviation. In relation with method of collection data, the writer uses the library method as her instrument. The writer relates it to the study of register in spoken and written communication. The technique of analyzing the data using descriptive method. The types of register in this term will be separated into formal register and informal register, and identify the meaning of register.

A proposed descriptive methodology for environmental geologic (envirogeologic) site characterization

International Nuclear Information System (INIS)

Schwarz, D.L.; Snyder, W.S.

1994-01-01

We propose a descriptive methodology for use in environmental geologic (envirogeologic) site characterization. The method uses traditional sedimentologic descriptions augmented by environmental data needs, and facies analysis. Most other environmental methodologies for soil and sediment characterization use soil engineering and engineering geology techniques that classify by texture and engineering properties. This technique is inadequate for envirogeologic characterization of sediments. In part, this inadequacy is due to differences in the grain-size between the Unified soil Classification and the Udden-Wentworth scales. Use of the soil grain-size classification could easily cause confusion when attempting to relate descriptions based on this classification to our basic understanding of sedimentary depositional systems. The proposed envirogeologic method uses descriptive parameters to characterize a sediment sample, suggests specific tests on samples for adequate characterization, and provides a guidelines for subsurface facies analysis, based on data retrieved from shallow boreholes, that will allow better predictive models to be developed. This methodology should allow for both a more complete site assessment, and provide sufficient data for selection of the appropriate remediation technology, including bioremediation. 50 refs

Photophysical and photochemical study of styrene dyes related to their laser efficiency

International Nuclear Information System (INIS)

Meyer, Martine

1989-01-01

The photophysical and photochemical properties of two styrene dyes: 4-dicyanomethylene-2-methyl-6-p-dimethylamino-styryl-4H-pyran (DCM) and 7-dimethylamino-3-(-p-formyl-styryl)-1,4-benzoxazine-2-one (DFSBO) have been studied. These molecules have electron donor and electron acceptor groups which give to their fluorescent excited state a charge transfer state character. The red shifts of the absorption and fluorescence spectra in polar solvents and the large Stokes shift related to the increase of the dipole moment from the ground state to the singlet excited state have been fully characterised. The absorption spectra of the first excited singlet and triplet states and the quantum yields of the intersystem crossing to the triplet state have been determined. The existence of conformers of the two dyes has been evidenced. The synthesis of DCM leads to the trans isomer which, under light exposure undergoes photo-isomerization to the cis-compound. Their fluorescence lifetimes and the photo-isomerization efficiency are solvent dependent. The DFSBO emission spectra depend greatly on the excitation wavelength. This effect can be explained by the occurrence of two rotational conformers one being stabilised by an intramolecular hydrogen bond. The spectral properties of these two molecules enable us to explain why DCM is a very good laser dye whereas DFSBO has a poor laser efficiency. (author) [fr

Weak Form Efficiency of the Insurance Industry: Empirical Evidence from Nigeria

Directory of Open Access Journals (Sweden)

Emenike Kalu Onwukwe

2018-02-01

Full Text Available This paper evaluated the insurance sector of Nigeria Stock Exchange (NSE for evidence weak-form efficiency using daily returns from January 2009 to February 2016. The study employs descriptive analysis, non-parametric runs test and autocorrelation function as well as Ljung-Box Q statistics in conducting the evaluation. Descriptive statistics of the insurance sector return series showed negative skewness and leptokurtic distribution. Estimates from the Jarque-Bera normality test showed that the insurance sector returns did not follow normal distribution. Results of the runs test reject null hypothesis of randomness in the return series of the insurance sector in the period studied. Furthermore, the autocorrelation functions and the Ljung-Box Q tests provide evidence of serial correlation in the stock returns of the insurance sector. Overall results from the study suggested that the insurance sector of NSE is not weak-form efficient. Consequently, technical analysis on the insurance sector of the NSE may not be fruitless.

Weak-form Efficiency of the Insurance Industry: Empirical Evidence from Nigeria

Directory of Open Access Journals (Sweden)

Emenike Kalu Onwukwe

2018-02-01

Full Text Available This paper evaluates the insurance sector of Nigeria Stock Exchange (NSE for evidence weak-form efficiency using daily returns from January 2009 to February 2016. The study employs descriptive analysis, non-parametric runs test and autocorrelation function as well as Ljung-Box Q statistics in conducting the evaluation. Descriptive statistics of the insurance sector return series show negative skewness and leptokurtic distribution. Estimates from the Jarque-Bera normality test show that the insurance sector returns do not follow a normal distribution. Results of the runs test reject the null hypothesis of randomness in the return series of the insurance sector in the period studied. Furthermore, the autocorrelation functions and the Ljung-Box Q tests provide evidence of serial correlation in the stock returns of the insurance sector. Overall results from the study suggest that the insurance sector of NSE is not weak-form efficient. Consequently, technical analysis on the insurance sector of the NSE may not be fruitless.

THE EFFICIENCY OF PROMOTIONAL INSTRUMENTS RELATED TO THE PRODUCT LIFE CYCLE STAGES

Directory of Open Access Journals (Sweden)

MIHAELA MARCU

2010-01-01

Full Text Available Regarded as a planning tool, PLC (product life cycle strongly contributes to the identification of the main marketing challenges that may arise throughout the life of a product/service. Thus, the marketing management has the opportunity to develop and implement those solutions designed to optimize each of the 4P of marketing mix: product (quality, price, distribution (placement and promotion. The communication program has an essential role, because the company presents through it its "product" to actual or potential customers in order to convince them of the benefits of purchasing/using it. The efficiency of the promotional instruments involves an appropriate allocation of funds needed to promote the product/service in relation to the stage of its life cycle.

Self-assessment as an approach to improvement of efficient implementation of Ukrainian NPP operational experience

International Nuclear Information System (INIS)

Pecheritsya, L.M.; Lyigots'kij, O.Yi.; Pecheritsya, O.V.; Tarasenko, V.M.

2012-01-01

the paper contains a brief description of the procedure for implementation of operational experience, focuses on the role of self -assessment in efficient use of operational experience, presents a review of international and national practices of self-assessment and review of the main features, issues and ways to improve self-assessment of efficient use of operational experience in Ukraine

Carotenoid coloration is related to fat digestion efficiency in a wild bird

Science.gov (United States)

Madonia, Christina; Hutton, Pierce; Giraudeau, Mathieu; Sepp, Tuul

2017-12-01

Some of the most spectacular visual signals found in the animal kingdom are based on dietarily derived carotenoid pigments (which cannot be produced de novo), with a general assumption that carotenoids are limited resources for wild organisms, causing trade-offs in allocation of carotenoids to different physiological functions and ornamentation. This resource trade-off view has been recently questioned, since the efficiency of carotenoid processing may relax the trade-off between allocation toward condition or ornamentation. This hypothesis has so far received little exploratory support, since studies of digestive efficiency of wild animals are limited due to methodological difficulties. Recently, a method for quantifying the percentage of fat in fecal samples to measure digestive efficiency has been developed in birds. Here, we use this method to test if the intensity of the carotenoid-based coloration predicts digestive efficiency in a wild bird, the house finch ( Haemorhous mexicanus). The redness of carotenoid feather coloration (hue) positively predicted digestion efficiency, with redder birds being more efficient at absorbing fats from seeds. We show for the first time in a wild species that digestive efficiency predicts ornamental coloration. Though not conclusive due to the correlative nature of our study, these results strongly suggest that fat extraction might be a crucial but overlooked process behind many ornamental traits.

Analysis of the external and internal quantum efficiency of multi-emitter, white organic light emitting diodes

Science.gov (United States)

Furno, Mauro; Rosenow, Thomas C.; Gather, Malte C.; Lüssem, Björn; Leo, Karl

2012-10-01

We report on a theoretical framework for the efficiency analysis of complex, multi-emitter organic light emitting diodes (OLEDs). The calculation approach makes use of electromagnetic modeling to quantify the overall OLED photon outcoupling efficiency and a phenomenological description for electrical and excitonic processes. From the comparison of optical modeling results and measurements of the total external quantum efficiency, we obtain reliable estimates of internal quantum yield. As application of the model, we analyze high-efficiency stacked white OLEDs and comment on the various efficiency loss channels present in the devices.

Energy efficiency analysis: biomass-to-wheel efficiency related with biofuels production, fuel distribution, and powertrain systems.

Directory of Open Access Journals (Sweden)

Wei-Dong Huang

Full Text Available BACKGROUND: Energy efficiency analysis for different biomass-utilization scenarios would help make more informed decisions for developing future biomass-based transportation systems. Diverse biofuels produced from biomass include cellulosic ethanol, butanol, fatty acid ethyl esters, methane, hydrogen, methanol, dimethyether, Fischer-Tropsch diesel, and bioelectricity; the respective powertrain systems include internal combustion engine (ICE vehicles, hybrid electric vehicles based on gasoline or diesel ICEs, hydrogen fuel cell vehicles, sugar fuel cell vehicles (SFCV, and battery electric vehicles (BEV. METHODOLOGY/PRINCIPAL FINDINGS: We conducted a simple, straightforward, and transparent biomass-to-wheel (BTW analysis including three separate conversion elements--biomass-to-fuel conversion, fuel transport and distribution, and respective powertrain systems. BTW efficiency is a ratio of the kinetic energy of an automobile's wheels to the chemical energy of delivered biomass just before entering biorefineries. Up to 13 scenarios were analyzed and compared to a base line case--corn ethanol/ICE. This analysis suggests that BEV, whose electricity is generated from stationary fuel cells, and SFCV, based on a hydrogen fuel cell vehicle with an on-board sugar-to-hydrogen bioreformer, would have the highest BTW efficiencies, nearly four times that of ethanol-ICE. SIGNIFICANCE: In the long term, a small fraction of the annual US biomass (e.g., 7.1%, or 700 million tons of biomass would be sufficient to meet 100% of light-duty passenger vehicle fuel needs (i.e., 150 billion gallons of gasoline/ethanol per year, through up to four-fold enhanced BTW efficiencies by using SFCV or BEV. SFCV would have several advantages over BEV: much higher energy storage densities, faster refilling rates, better safety, and less environmental burdens.

Energy Efficiency Analysis: Biomass-to-Wheel Efficiency Related with Biofuels Production, Fuel Distribution, and Powertrain Systems

Science.gov (United States)

Huang, Wei-Dong; Zhang, Y-H Percival

2011-01-01

Background Energy efficiency analysis for different biomass-utilization scenarios would help make more informed decisions for developing future biomass-based transportation systems. Diverse biofuels produced from biomass include cellulosic ethanol, butanol, fatty acid ethyl esters, methane, hydrogen, methanol, dimethyether, Fischer-Tropsch diesel, and bioelectricity; the respective powertrain systems include internal combustion engine (ICE) vehicles, hybrid electric vehicles based on gasoline or diesel ICEs, hydrogen fuel cell vehicles, sugar fuel cell vehicles (SFCV), and battery electric vehicles (BEV). Methodology/Principal Findings We conducted a simple, straightforward, and transparent biomass-to-wheel (BTW) analysis including three separate conversion elements -- biomass-to-fuel conversion, fuel transport and distribution, and respective powertrain systems. BTW efficiency is a ratio of the kinetic energy of an automobile's wheels to the chemical energy of delivered biomass just before entering biorefineries. Up to 13 scenarios were analyzed and compared to a base line case – corn ethanol/ICE. This analysis suggests that BEV, whose electricity is generated from stationary fuel cells, and SFCV, based on a hydrogen fuel cell vehicle with an on-board sugar-to-hydrogen bioreformer, would have the highest BTW efficiencies, nearly four times that of ethanol-ICE. Significance In the long term, a small fraction of the annual US biomass (e.g., 7.1%, or 700 million tons of biomass) would be sufficient to meet 100% of light-duty passenger vehicle fuel needs (i.e., 150 billion gallons of gasoline/ethanol per year), through up to four-fold enhanced BTW efficiencies by using SFCV or BEV. SFCV would have several advantages over BEV: much higher energy storage densities, faster refilling rates, better safety, and less environmental burdens. PMID:21765941

Energy efficiency analysis: biomass-to-wheel efficiency related with biofuels production, fuel distribution, and powertrain systems.

Science.gov (United States)

Huang, Wei-Dong; Zhang, Y-H Percival

2011-01-01

Energy efficiency analysis for different biomass-utilization scenarios would help make more informed decisions for developing future biomass-based transportation systems. Diverse biofuels produced from biomass include cellulosic ethanol, butanol, fatty acid ethyl esters, methane, hydrogen, methanol, dimethyether, Fischer-Tropsch diesel, and bioelectricity; the respective powertrain systems include internal combustion engine (ICE) vehicles, hybrid electric vehicles based on gasoline or diesel ICEs, hydrogen fuel cell vehicles, sugar fuel cell vehicles (SFCV), and battery electric vehicles (BEV). We conducted a simple, straightforward, and transparent biomass-to-wheel (BTW) analysis including three separate conversion elements--biomass-to-fuel conversion, fuel transport and distribution, and respective powertrain systems. BTW efficiency is a ratio of the kinetic energy of an automobile's wheels to the chemical energy of delivered biomass just before entering biorefineries. Up to 13 scenarios were analyzed and compared to a base line case--corn ethanol/ICE. This analysis suggests that BEV, whose electricity is generated from stationary fuel cells, and SFCV, based on a hydrogen fuel cell vehicle with an on-board sugar-to-hydrogen bioreformer, would have the highest BTW efficiencies, nearly four times that of ethanol-ICE. In the long term, a small fraction of the annual US biomass (e.g., 7.1%, or 700 million tons of biomass) would be sufficient to meet 100% of light-duty passenger vehicle fuel needs (i.e., 150 billion gallons of gasoline/ethanol per year), through up to four-fold enhanced BTW efficiencies by using SFCV or BEV. SFCV would have several advantages over BEV: much higher energy storage densities, faster refilling rates, better safety, and less environmental burdens.

The quality of intensive care unit nurse handover related to end of life: a descriptive comparative international study.

Science.gov (United States)

Ganz, Freda DeKeyser; Endacott, Ruth; Chaboyer, Wendy; Benbinishty, Julie; Ben Nun, Maureen; Ryan, Helen; Schoter, Amanda; Boulanger, Carole; Chamberlain, Wendy; Spooner, Amy

2015-01-01

Quality ICU end-of-life-care has been found to be related to good communication. Handover is one form of communication that can be problematic due to lost or omitted information. A first step in improving care is to measure and describe it. The objective of this study was to describe the quality of ICU nurse handover related to end-of-life care and to compare the practices of different ICUs in three different countries. This was a descriptive comparative study. The study was conducted in seven ICUs in three countries: Australia (1 unit), Israel (3 units) and the UK (3 units). A convenience sample of 157 handovers was studied. Handover quality was rated based on the ICU End-of-Life Handover tool, developed by the authors. The highest levels of handover quality were in the areas of goals of care and pain management while lowest levels were for legal issues (proxy and advanced directives) related to end of life. Significant differences were found between countries and units in the total handover score (country: F(2,154)=25.97, p=studied. The total score was higher when quality of care might be deemed at greater risk (if the nurses did not know the patient or the patient was expected to die), indicating that nurses were exercising some form of discretionary decision making around handover communication; thus validating the measurement tool. Copyright © 2014. Published by Elsevier Ltd.

Polemic and Descriptive Negations

DEFF Research Database (Denmark)

Horslund, Camilla Søballe

2011-01-01

to semantics and pragmatics, negations can be used in three different ways, which gives rise to a typology of three different types of negations: 1) the descriptive negation, 2) the polemic negation, and 3) the meta-linguistic negation (Nølke 1999, 4). This typology illuminates the fact that the negation...... common in certain social context or genres, while polemic negations are more likely to come up in other genres and social settings. Previous studies have shown a relation between articulatory prominence and register, which may further inform the analysis. Hence, the paper investigates how articulatory...... prominence and register may either work in concert or oppose each other with respect to the cues they provide for the interpretation....

Physics 3204. Course Description.

Science.gov (United States)

Newfoundland and Labrador Dept. of Education.

A description of the physics 3204 course in Newfoundland and Labrador is provided. The description includes: (1) statement of purpose, including general objectives of science education; (2) a list of six course objectives; (3) course content for units on sound, light, optical instruments, electrostatics, current electricity, Michael Faraday and…

Yoga, breast cancer-related lymphoedema and well-being: A descriptive report of women's participation in a clinical trial.

Science.gov (United States)

Loudon, Annette; Barnett, Tony; Williams, Andrew

2017-12-01

To describe the experiences of women taking part in a yoga intervention trial for breast cancer-related lymphoedema. Around 20% of women will experience lymphoedema as a consequence of treatment for breast cancer. Specialist lymphoedema clearing, along with self-management, remains the mainstay of therapy. Yoga, an increasingly popular complementary therapeutic practice, may provide another tool to augment self-management. A qualitative, descriptive design. Interviews were conducted with 15 women with stage one breast cancer-related lymphoedema who had completed an 8-week yoga intervention trial. The intervention consisted of a weekly teacher-led 1.5-hr yoga class and a daily home practice using a 45-min DVD. Interviews were audio-taped and transcribed. These data were then analysed using an iterative-thematic approach. Participants reported improved well-being, increased awareness of their physical body as well as improved physical, mental and social functioning. They gained from being part of the yoga group that also provided a forum for them to share their experiences. Nine women felt empowered to describe their yoga participation as a transformative journey through illness. When safe to do so, the holistic practice of yoga may augment and provide additional benefit to current self-management and treatment practices for women with breast cancer-related lymphoedema. Patients with breast cancer-related lymphoedema may seek advice and guidance from nurses and other healthcare professionals on a range of complementary therapies to help relieve symptoms and promote recovery. Patients who choose to augment their treatment of breast cancer-related lymphoedema by practicing yoga should be carefully assessed, be taught an appropriate technique by a qualified yoga teacher/therapist and its impact monitored by their yoga teacher/therapist, breast care nurse, lymphoedema therapist or treating clinician. © 2017 John Wiley & Sons Ltd.

Measurements of the light conversion efficiency of lithium borate for alpha particles relative to cobalt-60 gamma radiation

Energy Technology Data Exchange (ETDEWEB)

Bartlett, D.T.; Wall, B.F.; Fisher, E.S. (National Radiological Protection Board, Harwell (UK))

1982-01-01

The results are reported of measurements of the light conversion efficiencies of lithium borate TLD phosphor of British Nuclear Fuels Ltd. manufacture to 5.65 MeV and 2.4 MeV alpha particles relative to /sup 60/Co gamma radiation.

WRAP Module 1 data management system (DMS) software design description (SDD)

International Nuclear Information System (INIS)

Weidert, J.R.

1996-01-01

Revision 2 of the Waste Receiving and Processing (WRAP) Module 1 Data Management System (DMS) Preliminary Software Design Description (PSDD) provides a high-level design description of the system. The WRAP 1 DMS is required to collect, store, and report data related to certification, tracking, packaging, repackaging, processing, and shipment of waste processed or stored at the WRAP 1 facility. The WRAP 1 DMS SDD is used as the primary medium for communication software design information. This release provides design descriptions for the following process modules produced under Phase 1 of the development effort: Receiving Drum or Box Containers Process Routing and Picklists; Waste Inventory by Location and/or Container Relationships; LLW Process Glovebox Facility Radiologic Material Inventory Check (partial); Shipping (partial production); Drum or Box NDE Operations; and Drum or Box NDA Operations Data Review (partial production). In addition, design descriptions are included for the following process modules scheduled for development under Phases 2 and 3: Activity Comment; LLW RWM Glovebox Sample Management; TRU Process Glovebox; TRU RWM Glovebox; and TRUPACT Processing. Detailed design descriptions for Reports and Facility Metrics have also been provided for in Revision 2 of this document

AN ANALYSIS REGARDING DESCRIPTIVE DIMENSIONS OF BRAND EQUITY

Directory of Open Access Journals (Sweden)

Ioan MOISESCU

2007-01-01

Full Text Available The competitive potential of any company is significantly influenced by the brands held in the company’s portfolio. Brands are definitely valuable marketing assets. As the brand is a central element of any marketing strategy it is essential to be aware of the descriptive dimensions of its equity. This paper tries to outline these dimensions as follows: brand loyalty, brand awareness, brand perceived quality, brand personality, brand image, brand identity and brand associations, as analyzed in the specialized literature. Identifying and comparing different approaches regarding each brand equity dimension and revealing interdependencies between these dimensions, focusing on the importance of scientifically determining their role in generating a long-term increase in marketing efforts efficiency, are among the main objectives of this paper.

Quantum logical description of microsystems

International Nuclear Information System (INIS)

Stachow, E.-W.

1984-01-01

An abstract object language with respect to single microsystems and its pragmatic foundation are considered in a systematic way. The quantum physical restrictions of local operations of a speaker lead to a propositional language which, under certain conditions, can be referred to an individual microsystem. The time dependence of the propositions according to the measuring process is discussed. Finally the language is extended to a space-time description of microsystems. Hereby relativity imposes certain constraints on the validi ty regions of propositions in space-time. Via realization, the language establishes the essential features of quantum physics in Hilbert space. (author)

Energy efficiency in Swedish industry

International Nuclear Information System (INIS)

Zhang, Shanshan; Lundgren, Tommy; Zhou, Wenchao

2016-01-01

This paper assesses energy efficiency in Swedish industry. Using unique firm-level panel data covering the years 2001–2008, the efficiency estimates are obtained for firms in 14 industrial sectors by using data envelopment analysis (DEA). The analysis accounts for multi-output technologies where undesirable outputs are produced alongside with the desirable output. The results show that there was potential to improve energy efficiency in all the sectors and relatively large energy inefficiencies existed in small energy-use industries in the sample period. Also, we assess how the EU ETS, the carbon dioxide (CO_2) tax and the energy tax affect energy efficiency by conducting a second-stage regression analysis. To obtain consistent estimates for the regression model, we apply a modified, input-oriented version of the double bootstrap procedure of Simar and Wilson (2007). The results of the regression analysis reveal that the EU ETS and the CO_2 tax did not have significant influences on energy efficiency in the sample period. However, the energy tax had a positive relation with the energy efficiency. - Highlights: • We use DEA to estimate firm-level energy efficiency in Swedish industry. • We examine impacts of climate and energy policies on energy efficiency. • The analyzed policies are Swedish carbon and energy taxes and the EU ETS. • Carbon tax and EU ETS did not have significant influences on energy efficiency. • The energy tax had a positive relation with energy efficiency.

A phenomenological calculus of Wiener description space.

Science.gov (United States)

Richardson, I W; Louie, A H

2007-10-01

The phenomenological calculus is a categorical example of Robert Rosen's modeling relation. This paper is an alligation of the phenomenological calculus and generalized harmonic analysis, another categorical example. Our epistemological exploration continues into the realm of Wiener description space, in which constitutive parameters are extended from vectors to vector-valued functions of a real variable. Inherent in the phenomenology are fundamental representations of time and nearness to equilibrium.

Statistical mechanics and the description of the early universe I

DEFF Research Database (Denmark)

Pessah, Martin Elias; F. Torres, Diego; Vucetich, H.

2001-01-01

We analyze how the thermal history of the universe is influenced by the statistical description, assuming a deviation from the usual Bose-Einstein, Fermi-Dirac and Boltzmann-Gibbs distribution functions. These deviations represent the possible appearance of non-extensive effects related with the ......We analyze how the thermal history of the universe is influenced by the statistical description, assuming a deviation from the usual Bose-Einstein, Fermi-Dirac and Boltzmann-Gibbs distribution functions. These deviations represent the possible appearance of non-extensive effects related...... and to place limits to the range of its validity. The corrections obtained will change with temperature, and consequently, the bounds on the possible amount of non-extensivity will also change with time. We generalize results which can be used in other contexts as well, as the Boltzmann equation and the Saha...

Genetic Dissection of Root Morphological Traits Related to Nitrogen Use Efficiency in Brassica napus L. under Two Contrasting Nitrogen Conditions

Directory of Open Access Journals (Sweden)

Jie Wang

2017-09-01

Full Text Available As the major determinant for nutrient uptake, root system architecture (RSA has a massive impact on nitrogen use efficiency (NUE. However, little is known the molecular control of RSA as related to NUE in rapeseed. Here, a rapeseed recombinant inbred line population (BnaZNRIL was used to investigate root morphology (RM, an important component for RSA and NUE-related traits under high-nitrogen (HN and low-nitrogen (LN conditions by hydroponics. Data analysis suggested that RM-related traits, particularly root size had significantly phenotypic correlations with plant dry biomass and N uptake irrespective of N levels, but no or little correlation with N utilization efficiency (NUtE, providing the potential to identify QTLs with pleiotropy or specificity for RM- and NUE-related traits. A total of 129 QTLs (including 23 stable QTLs, which were repeatedly detected at least two environments or different N levels were identified and 83 of them were integrated into 22 pleiotropic QTL clusters. Five RM-NUE, ten RM-specific and three NUE-specific QTL clusters with same directions of additive-effect implied two NUE-improving approaches (RM-based and N utilization-based directly and provided valuable genomic regions for NUE improvement in rapeseed. Importantly, all of four major QTLs and most of stable QTLs (20 out of 23 detected here were related to RM traits under HN and/or LN levels, suggested that regulating RM to improve NUE would be more feasible than regulating N efficiency directly. These results provided the promising genomic regions for marker-assisted selection on RM-based NUE improvement in rapeseed.

Cross-sectional study of road accidents and related law enforcement efficiency for 10 countries: A gap coherence analysis.

Science.gov (United States)

Urie, Yohan; Velaga, Nagendra R; Maji, Avijit

2016-10-02

Road crashes are considered as the eighth leading causes of death. There is a wide disparity in crash severity and law enforcement efficiency among low-, medium-, and high-income countries. It would be helpful to review the crash severity trends in these countries, identify the vulnerable road users, and understand the law enforcement effectiveness in devising efficient road safety improvement strategies. The crash severity, fatality rate among various age groups, and law enforcement strategies of 10 countries representing low-income (i.e., India and Morocco), medium-income (i.e. Argentina, South Korea, and Greece), and high-income (i.e., Australia, Canada, France, the UK, and the United States) are studied and compared for a period of 5 years (i.e., 2008 to 2012). The critical parameters affecting road safety are identified and correlated with education, culture, and basic compliance with traffic safety laws. In the process, possible road safety improvement strategies are identified for low-income countries. The number of registered vehicles shows an increasing trend for low-income countries as do the crash rate and crash severity. Compliance related to seat belt and helmet laws is high in high-income countries. In addition, recent seat belt- and helmet-related safety programs in middle-income countries helped to curb fatalities. Noncompliance with safety laws in low-income countries is attributed to education, culture, and inefficient law enforcement. Efficient law enforcement and effective safety education taking into account cultural diversity are the key aspects to reduce traffic-related injuries and fatalities in low-income countries like India.

Generalizing: The descriptive struggle

Directory of Open Access Journals (Sweden)

Barney G. Glaser, Ph.D.; Hon Ph.D.

2006-11-01

Full Text Available The literature is not kind to the use of descriptive generalizations. Authors struggle and struggle to find and rationalize a way to use them and then fail in spite of trying a myriad of work-arounds. And then we have Lincoln and Guba’s famous statement: “The only generalization is: there is no generalization” in referring to qualitative research. (op cit, p. 110 They are referring to routine QDA yielding extensive descriptions, but which tacitly include conceptual generalizations without any real thought of knowledge about them. In this chapter I wish to explore this struggle for the purpose of explaining that the various contra arguments to using descriptive generalizations DO NOT apply to the ease of using conceptual generalizations yielded in SGT and especially FGT. I will not argue for the use of descriptive generalization. I agree with Lincoln and Guba with respect to QDA, “the only generalization is: there is no generalization.” It is up to the QDA methodologists, of whom there are many; to continue the struggle and I wish them well.

Utility and performance relative to consumer product energy efficiency standards. Final technical report

Energy Technology Data Exchange (ETDEWEB)

Coggins, J.L.

1979-12-14

An investigation of the relative utility and performance of nine major household consumer products covered by the Energy Policy and Conservation Act is summarized. The objective was to define the terms utility and performance, to recommend methods for quantifying these two concepts, and to recommend an approach for dealing with utility and performance issues in the energy efficiency standards program. The definitions developed are: performance of a consumer product is the objective measure of how well, with the expected level of consumer input (following the manufacturer's instructions for installation and operation), the product does its intended job; and utility of a consumer product is a subjective measure, based on the consumer's perception, of the capability of the product to satisfy human needs. Quantification is based on test procedures and consumer survey methods which are largely already in use by industry. Utility and performance issues are important in product classification for prescribing energy efficiency standards. The recommended approach to utility and performance issues and classification is: prior to setting standards, evaluate utility and performance issues in the most quantitative way allowed by resources and schedules in order to develop classification guidelines. This approach requires no changes in existing Department of Energy test procedures.

Perceived descriptive safety-related driving norms within and outside Arab towns and villages in Israel.

Science.gov (United States)

Baron-Epel, Orna; Obid, Samira; Fertig, Shahar; Gitelman, Victoria

2016-01-01

Involvement in car crashes is higher among Israeli Arabs compared to Jews. This study characterized perceived descriptive driving norms (PDDNs) within and outside Arab towns/villages and estimated their association with involvement in car crashes. Arab drivers (594) living in 19 towns and villages were interviewed in face-to-face interviews. The questionnaire included questions about involvement in car crashes, PDDNs within and outside the towns/villages, attitudes toward traffic safety laws, traffic law violations, and socioeconomic and demographic variables. PDDNs represent individuals' perceptions on how safe other people typically drive. The low scores indicate a low percentage of drivers performing unsafe behaviors (safer driving-related norms). A structural equation modeling analysis was applied to identify factors associated with PDDNs and involvement in car crashes. A large difference was found in PDDNs within and outside the towns/villages. Mostly, the respondents reported higher rates of unsafe PDDNs within the towns/villages (mean = 3.76, SD = 0.63) and lower rates of PDDNs outside the towns/villages (mean = 2.12, SD = 0.60). PDDNs outside the towns/villages were associated with involvement in a car crash (r = -0.12, P driving and involvement in car crashes in Arab Israelis. Because PDDNs outside towns/villages were better, increased law enforcement within towns/villages may improve these norms and decrease involvement in car crashes.

Exploring the relation between process design and efficiency in high-volume cataract pathways from a lean thinking perspective

NARCIS (Netherlands)

van Vliet, Ellen J.; Bredenhoff, E.; Bredenhoff, Eelco; Sermeus, Walter; Kop, Lucas M.; Sol, Johannes C.A.; van Harten, Willem H.

2011-01-01

Objective: To compare process designs of three high-volume cataract pathways in a lean thinking framework and to explore how efficiency in terms of lead times, hospital visits and costs is related to process design. Design: International retrospective comparative benchmark study with a mixed-method

Attitudes and Descriptive Norms of Alcohol-Related Problems as Predictors of Alcohol Use among College Students

Science.gov (United States)

Sheppard, Meg E.; Usdan, Stuart L.; Higginbotham, John C.; Cremeens-Matthews, Jennifer L.

2016-01-01

Background: The purpose of this study is to identify predictors of alcohol use based on personal values and several constructs from the Integrated Behavioral Model (i.e., attitudes, injunctive norms and descriptive norms) among undergraduate college students. Methods: A cross sectional study design was used with a convenience sample of college…

The Relative Efficiencies of Research Universities of Science and Technology in China: Based on the Data Envelopment Analysis and Stochastic Frontier Analysis

Science.gov (United States)

Chuanyi, Wang; Xiaohong, Lv; Shikui, Zhao

2016-01-01

This paper applies data envelopment analysis (DEA) and stochastic frontier analysis (SFA) to explore the relative efficiency of China's research universities of science and technology. According to the finding, when talent training is the only output, the efficiency of research universities of science and technology is far lower than that of…

Innovations with services relating to energy efficiency. Basic information and examples; Innovationen mit Dienstleistungen im Bereich Energieeffizienz. Basisinformationen und Beispiele

Energy Technology Data Exchange (ETDEWEB)

Knoll, Michael; Kollnig, Sarah; Oertel, Britta

2010-07-01

This study describes how the ''Energy Efficient City'' competition is intended to promote activities towards greater energy efficiency which relate to cities as systems, are innovative, and conceive of and incorporate services as part of the solution. ''Innovation with services'' is not only about the further development of existing services but more particularly about the creation of high-quality services in growth areas which can serve to speed up innovation and create new application potentials for technical developments. They should be based on a holistic view on urban processes of energy use and energy supply and give consideration to all relevant stakeholders. The ''Energy Efficient City'' competition is aimed at systematically linking innovations with services to energy efficiency issues. The implementation of these goals will be facilitated by accompanying research. To this end the present text provides information on how services can be geared to energy efficiency.

DETERMINANTS OF MARKETING EFFICIENCY FOR PACKAGED WATER IN IMO STATE, NIGERIA: MAXIMIZING FIRMS ASSETS TO IMPROVE CONSUMER WELFARE

OpenAIRE

Ogbonnaya Ukeh OTEH; Etomchi Maria-stella, NJOKU

2014-01-01

Competition is necessary for enhanced customer welfare and efficiency. This study focused on marketing efficiency of packaged water in Imo state Nigeria. It specifically examined the socio-economic profile of the respondents; levels of marketing efficiency of packaged water and its determinants. The study employed purposive and multistage sampling technique in the selection of location and respondents respectively from whom information were elicited. Analytically, descriptive statistics, sche...

Relative Efficiency of Split-plot Design (SPD) to Randomized ...

African Journals Online (AJOL)

PROF. O. E. OSUAGWU

2013-06-01

Jun 1, 2013 ... West African Journal of Industrial and Academic Research Vol.7 No. 1 June .... effects. They concluded that the proposed efficiency measures provide feasible solutions for .... Fm = d.f for the whole-plot treatment; Fb= d.f for the ...

Cascade Boosting-Based Object Detection from High-Level Description to Hardware Implementation

Directory of Open Access Journals (Sweden)

K. Khattab

2009-01-01

Full Text Available Object detection forms the first step of a larger setup for a wide variety of computer vision applications. The focus of this paper is the implementation of a real-time embedded object detection system while relying on high-level description language such as SystemC. Boosting-based object detection algorithms are considered as the fastest accurate object detection algorithms today. However, the implementation of a real time solution for such algorithms is still a challenge. A new parallel implementation, which exploits the parallelism and the pipelining in these algorithms, is proposed. We show that using a SystemC description model paired with a mainstream automatic synthesis tool can lead to an efficient embedded implementation. We also display some of the tradeoffs and considerations, for this implementation to be effective. This implementation proves capable of achieving 42 fps for 320×240 images as well as bringing regularity in time consuming.

48 CFR 52.214-21 - Descriptive Literature.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Descriptive Literature. 52....214-21 Descriptive Literature. As prescribed in 14.201-6(p)(1), insert the following provision: Descriptive Literature (APR 2002) (a) Descriptive literature, as used in this provision, means information...

Relative Efficiency of Field and Online Strategies in the Recruitment of HIV-Positive Men Who Have Sex With Men.

Science.gov (United States)

Vial, Andrea C; Starks, Tyrel J; Parsons, Jeffrey T

2015-04-01

Efforts to reach HIV-positive men who have sex with men (MSM) and link them to care must be expanded; however, finding and recruiting them remains a challenge. We compared the efficiency of three recruitment sources in reaching self-identified HIV-positive MSM with various characteristics. Relative to recruitment online and at clubs and bars, AIDS Service Organizations (ASOs) were significantly more efficient in reaching HIV-positive MSM in general. This was also true for those with specific characteristics of interest such as substance/stimulant use, and HIV-positive MSM who were racial/ethnic minorities. Both ASOs and online recruitment were more efficient than clubs and bars in reaching HIV-positive MSM not taking HIV medication. This was also the case for White HIV-positive MSM in general, and White HIV-positive MSM who used substances and stimulants. Online recruitment was also more efficient than clubs and bars in reaching HIV-positive MSM who were young across the board.

Energy efficiency and the influence of gas burners to the energy related carbon dioxide emissions of electric arc furnaces in steel industry

International Nuclear Information System (INIS)

Kirschen, Marcus; Risonarta, Victor; Pfeifer, Herbert

2009-01-01

Determining the complete energy balance of an electric arc furnace (EAF) provides an appropriate method to examine energy efficiency and identify energy saving potentials. However, the EAF energy balance is complex due to the combined input of electrical energy and chemical energy resulting from natural gas (NG) combustion and oxidation reactions in the steel melt. In addition, furnace off-gas measurements and slag analysis are necessary to reliably determine energy sinks. In this paper 70 energy balances and energy efficiencies from multiple EAFs are presented, including data calculated from plant measurements and compiled from the literature. Potential errors that can be incorporated in these calculations are also highlighted. The total energy requirement of these modern EAFs analysed ranged from 510 to 880 kWh/t, with energy efficiency values (η = ΔH Steel /E Total ) of between 40% and 75%. Furthermore, the focus was placed on the total energy related CO 2 emissions of EAF processes comprising NG combustion and electrical energy input. By assessing multiple EAF energy balances, a significant correlation between the total energy requirement and energy related specific CO 2 emissions was not evident. Whilst the specific consumption of NG in the EAF only had a minor impact on the EAF energy efficiency, it decreased the specific electrical energy requirement and increased EAF productivity where transformer power was restricted. The analysis also demonstrated that complementing and substituting electrical energy with NG was beneficial in reducing the total energy related CO 2 emissions when a certain level of substitution efficiency was achieved. Therefore, the appropriate use of NG burners in modern EAFs can result in an increased EAF energy intensity, whilst the total energy related CO 2 emissions remain constant or are even decreased.

Description langugage for the modelling and analysis of temporal change of instrumentation and control system structures

International Nuclear Information System (INIS)

Goering, Markus Heinrich

2013-01-01

The utilisation of computer-based I and C, as a result of the technological advancements in the computer industry, represents an up-to-date challenge for I and C engineers in nuclear power plants throughout the world. In comparison with the time-proven, hard-wired I and C, the engineering must consider the novel characteristics of computer-based technology during the implementation, these are primarily constituted by higher performance and the utilisation of software. On one hand, this allows for implementing more complex I and C functions and integrating several I and C functions on to single components, although on the other hand, the minimisation of the CCF probability is of high priority to the engineering. Furthermore, the engineering must take the implementation of the deterministic safety concept for the I and C design into consideration. This includes engineering the redundancy, diversity, physical separation, and independence design features, and is complemented by the analysis of the I and C design with respect to the superposition of pre-defined event sequences and postulated failure combinations, so as to secure the safe operation of the nuclear power plant. The focus of this thesis is on the basic principles of engineering, i.e. description languages and methods, which the engineering relies on for a highly qualitative and efficient computer-based I and C implementation. The analysis of the deterministic safety concept and computer-based I and C characteristics yields the relevant technical requirements for the engineering, these are combined with the general structuring principles of standard IEC 81346 and the extended description language evaluation criteria, which are based on the guideline VDI/VDE-3681, resulting in target criteria for evaluating description languages. The analysis and comparison of existing description languages reveals that no description language satisfactorily fulfils all target criteria, which is constituted in the

Description langugage for the modelling and analysis of temporal change of instrumentation and control system structures

Energy Technology Data Exchange (ETDEWEB)

Goering, Markus Heinrich

2013-10-25

The utilisation of computer-based I and C, as a result of the technological advancements in the computer industry, represents an up-to-date challenge for I and C engineers in nuclear power plants throughout the world. In comparison with the time-proven, hard-wired I and C, the engineering must consider the novel characteristics of computer-based technology during the implementation, these are primarily constituted by higher performance and the utilisation of software. On one hand, this allows for implementing more complex I and C functions and integrating several I and C functions on to single components, although on the other hand, the minimisation of the CCF probability is of high priority to the engineering. Furthermore, the engineering must take the implementation of the deterministic safety concept for the I and C design into consideration. This includes engineering the redundancy, diversity, physical separation, and independence design features, and is complemented by the analysis of the I and C design with respect to the superposition of pre-defined event sequences and postulated failure combinations, so as to secure the safe operation of the nuclear power plant. The focus of this thesis is on the basic principles of engineering, i.e. description languages and methods, which the engineering relies on for a highly qualitative and efficient computer-based I and C implementation. The analysis of the deterministic safety concept and computer-based I and C characteristics yields the relevant technical requirements for the engineering, these are combined with the general structuring principles of standard IEC 81346 and the extended description language evaluation criteria, which are based on the guideline VDI/VDE-3681, resulting in target criteria for evaluating description languages. The analysis and comparison of existing description languages reveals that no description language satisfactorily fulfils all target criteria, which is constituted in the

From energy efficiency towards resource efficiency within the Ecodesign Directive

DEFF Research Database (Denmark)

Bundgaard, Anja Marie; Mosgaard, Mette; Remmen, Arne

2017-01-01

on the most significant environmental impact has often resulted in a focus on energy efficiency in the use phase. Therefore, the Ecodesign Directive should continue to target resource efficiency aspects but also consider environ- mental aspects with a large improvement potential in addition to the most...... significant environmental impact. For the introduction of resource efficiency requirements into the Ecodesign Directive, these requirements have to be included in the preparatory study. It is therefore recommended to broaden the scope of the Methodology for the Ecodesign of Energy-related products and the Eco......The article examines the integration of resource efficiency into the European Ecodesign Directive. The purpose is to analyse the processes and stakeholder interactions, which formed the basis for integrating resource efficiency requirements into the implementing measure for vacuum cleaners...

A descriptive ecosystem model - a strategy for model development during site investigations

International Nuclear Information System (INIS)

Loefgren, Anders

2003-09-01

This report describes a strategy for the development of a site descriptive model for the surface ecosystem on the potential deep repository sites. The surface ecosystem embraces many disciplines, and these have to be identified, described and integrated in order to construct a descriptive ecosystem model that describes and quantifies biotic and abiotic patterns and processes of importance for the ecosystem on the site. The descriptive model includes both present day conditions and historical information. The descriptive ecosystem model will be used to supply input data for the safety assessment and to serve as the baseline model for devising a monitoring program to detect short-term disturbances caused first by the site investigations and later by the construction of the deep repository. Furthermore, it will serve as a reference for future comparisons to determine more long-term effects or changes caused by the deep repository. The report adopts a non-site-specific approach focusing on the following aims: 1. To present and define the properties that will constitute the descriptive ecosystem model. 2. To present a methodology for determining those properties. 3. To describe and develop the framework for the descriptive ecosystem model by integrating the different properties. 4. To present vital data from other site descriptive models such as those for geology or hydrogeology that interacts with and affects the descriptive ecosystem model. The properties are described under four different sections: general physical properties of the landscape, the terrestrial system, the limnic system and the marine system. These headings are further subdivided into entities that integrate properties in relation to processes

A descriptive ecosystem model - a strategy for model development during site investigations

Energy Technology Data Exchange (ETDEWEB)

Loefgren, Anders [Stockholm Univ. (Sweden). Dept. of Botany; Lindborg, Tobias [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)

2003-09-01

This report describes a strategy for the development of a site descriptive model for the surface ecosystem on the potential deep repository sites. The surface ecosystem embraces many disciplines, and these have to be identified, described and integrated in order to construct a descriptive ecosystem model that describes and quantifies biotic and abiotic patterns and processes of importance for the ecosystem on the site. The descriptive model includes both present day conditions and historical information. The descriptive ecosystem model will be used to supply input data for the safety assessment and to serve as the baseline model for devising a monitoring program to detect short-term disturbances caused first by the site investigations and later by the construction of the deep repository. Furthermore, it will serve as a reference for future comparisons to determine more long-term effects or changes caused by the deep repository. The report adopts a non-site-specific approach focusing on the following aims: 1. To present and define the properties that will constitute the descriptive ecosystem model. 2. To present a methodology for determining those properties. 3. To describe and develop the framework for the descriptive ecosystem model by integrating the different properties. 4. To present vital data from other site descriptive models such as those for geology or hydrogeology that interacts with and affects the descriptive ecosystem model. The properties are described under four different sections: general physical properties of the landscape, the terrestrial system, the limnic system and the marine system. These headings are further subdivided into entities that integrate properties in relation to processes.

Toward a statistical description of methane emissions from arctic wetlands

DEFF Research Database (Denmark)

Pirk, Norbert; Mastepanov, Mikhail; López-Blanco, Efrén

2017-01-01

, where the hypothesized slow-turnover carbon peaked at a time significantly related to the timing of snowmelt. The temporally wider component from fast-turnover carbon dominated the emissions in W Greenland and Svalbard. Altogether, we found no dependence of the total seasonal CH4 budget to the timing......Methane (CH4) emissions from arctic tundra typically follow relations with soil temperature and water table depth, but these process-based descriptions can be difficult to apply to areas where no measurements exist. We formulated a description of the broader temporal flux pattern in the growing...... season based on two distinct CH4 source components from slow and fast-turnover carbon. We used automatic closed chamber flux measurements from NE Greenland (74°N), W Greenland (64°N), and Svalbard (78°N) to identify and discuss these components. The temporal separation was well-suited in NE Greenland...

Inter-firm and intra-firm efficiency measures

NARCIS (Netherlands)

Oude Lansink, A.G.J.M.; Silva, E.; Stefanou, S.

2001-01-01

Intra-firm efficiency involves computing a particular firm's efficiency degree over time relative to the firm-specific production frontier. Inter-firm efficiency reveals a particular firm's performance over time relative to the ``best practice frontier'' among the set of comparable firms. These

HCIDL: Human-computer interface description language for multi-target, multimodal, plastic user interfaces

Directory of Open Access Journals (Sweden)

Lamia Gaouar

2018-06-01

Full Text Available From the human-computer interface perspectives, the challenges to be faced are related to the consideration of new, multiple interactions, and the diversity of devices. The large panel of interactions (touching, shaking, voice dictation, positioning … and the diversification of interaction devices can be seen as a factor of flexibility albeit introducing incidental complexity. Our work is part of the field of user interface description languages. After an analysis of the scientific context of our work, this paper introduces HCIDL, a modelling language staged in a model-driven engineering approach. Among the properties related to human-computer interface, our proposition is intended for modelling multi-target, multimodal, plastic interaction interfaces using user interface description languages. By combining plasticity and multimodality, HCIDL improves usability of user interfaces through adaptive behaviour by providing end-users with an interaction-set adapted to input/output of terminals and, an optimum layout. Keywords: Model driven engineering, Human-computer interface, User interface description languages, Multimodal applications, Plastic user interfaces

Discovering the Network Topology: An Efficient Approach for SDN

Directory of Open Access Journals (Sweden)

Leonardo OCHOA-ADAY

2016-11-01

Full Text Available Network topology is a physical description of the overall resources in the network. Collecting this information using efficient mechanisms becomes a critical task for important network functions such as routing, network management, quality of service (QoS, among many others. Recent technologies like Software-Defined Networks (SDN have emerged as promising approaches for managing the next generation networks. In order to ensure a proficient topology discovery service in SDN, we propose a simple agents-based mechanism. This mechanism improves the overall efficiency of the topology discovery process. In this paper, an algorithm for a novel Topology Discovery Protocol (SD-TDP is described. This protocol will be implemented in each switch through a software agent. Thus, this approach will provide a distributed solution to solve the problem of network topology discovery in a more simple and efficient way.

Upgrading and efficiency improvement in coal-fired power plants

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-01

Improving the efficiencies of the large number of older coal-fired power plants operating around the world would give major savings in CO2 emissions together with significant other benefits. This report begins with a summary of the ways efficiency can become degraded and of the means available to combat the decrease in performance. These include improvements to operating and maintenance practices and more major techniques that are available, including boiler and turbine retrofits. There is also an update on fuel drying developments as a route to higher efficiency in plants firing high moisture lignites. The largest chapter of the report contains a number of descriptions of case study improvement projects, to illustrate measures that have been applied, benefits that have been achieved and identify best practices, which are summarised. Major national and international upgrading programmes are described.

Measuring relative efficiency of applied science and technology universities in province of Semnan, Iran and providing suggestions for merging units

Directory of Open Access Journals (Sweden)

Abolfazl Danaei

2013-03-01

Full Text Available University of applied science and technology has been designed to create a platform for multilateral activities such as industrial, military and academic in developing countries to promote science and scientific research applications. These universities are responsible to promote practical training in quantitative and qualitative indicators and they provide appropriate infrastructure to implement theoretical graduates to solve practical problems to build necessary infrastructure to transfer modern technology into developing countries. During the past few years, there have been tremendous development on these units but some of them have not been efficient. In this paper, we present an empirical study to measure the relative efficiencies of various units of applied science and technology universities using data envelopment analysis. The proposed model of this paper uses two inputs including human resources as well as total assets and two outputs including the number of graduate students as well as operating profit. The results of the study have indicated that some of the units are inefficient and need to be merged with other units to increase the relative efficiency of these universities.

Olkiluoto site description 2006

International Nuclear Information System (INIS)

Andersson, J.; Ahokas, H.; Hudson, J.A.

2007-03-01

This second version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2004 (Posiva 2005) with the data and knowledge obtained up to December 2005. The main product of the modelling has been to develop a descriptive model of the site (the Site Descriptive Model), i.e. a model describing the geometry, properties of the bedrock and the water and the associated interacting processes and mechanisms. For practical reasons, the Site Descriptive Model is divided into five parts: surface system, geology, rock mechanics, hydrogeology and hydrogeochemistry, which are presented in individual chapters. Four separated models are presented: the geological, rock mechanics, hydrogeological and hydrogeochemical models. The consistency between the hydrogeological and hydrogeochemical models is assessed in a joint chapter. Chapter 1 presents an outline of the report, explains the background to its development and sets out its objectives and scope. It is also introduces and explains the integrated modelling methodology, the nomenclature used in the descriptions of the models and the prediction/outcome studies. Chapter 2 provides a brief overview of the data used for producing the Site Description. Chapters 3 to 8 present the descriptive modelling, which involves interpreting data, interpolating or extrapolating between measurement points and calibrating the model against data, based on the various assumptions made about each conceptual model. Chapter 9 presents the results of the prediction/outcome studies performed during 2005 and Chapter 10 the overall consistency and confidence assessment. Overall conclusions are provided in Chapter 11. The main advances since Site Report 2004 are: A new geological model is presented in Chapter 4, representing a significant change from Bedrock Model 2003/1. There has been extensive use of geological data, whereas hydrogeological data have deliberately not been used and more

Comparing the subjective task difficulty of human operators with task description levels

International Nuclear Information System (INIS)

Park, Jin Kyun; Jung, Won Dea; Yang, Joon Eon

2011-01-01

Without the loss of generality, it is reasonable to say that an operating procedure consists of many steps including detailed descriptions that provide necessary information in conducting the required tasks safely and effectively. In this regard, since it is widely perceived that procedures are effective for reducing the occurrence of human performance related problems, the use of procedures is very popular in large process control systems including nuclear power plants (NPPs), commercial airplanes and railway systems. However, the secure of an operational safety by using an operating procedure can be accomplished only if human operators are able to effectively obtain necessary information from it. In other words, it is hard to expect the reduction of human performance related problems, if task descriptions are so ambiguous or incomplete that human operators feel an undue difficulty in identifying 'what have to be done' and 'how to do it' from procedures. Unfortunately, it seems that a systematic method that can be used to distinguish the proper level of task descriptions is rare. For this reason, Park et al. developed a decision chart that could be helpful for characterizing the level of task descriptions. In this study, in order to ensure the appropriateness of the suggested decision chart, more detailed investigations were conducted with the support of human operators who are working as the operating personnel of NPPs

Fate of N and relative efficiency of 15N-labeled organic materials applied to transplanted rice in northern Kyushu region of Japan

International Nuclear Information System (INIS)

Nishida, Mizuhiko; Tsuchiya, Kazunari; Yamamuro, Shigekazu

2004-01-01

Seven kinds of 15 N-labeled organic materials were applied to transplanted rice to investigate their N fate and relative efficiency in the northern Kyushu region of Japan. The 15 N-labeled organic materials examined in a micro-plot experiment were cattle manure compost, poultry manure compost, swine feces, rice straw compost, rice bran, rice straw, and wheat straw. Regarding swine feces, rice bran, and wheat straw, the direct evaluation of their N fate in paddy fields using 15 N organic materials has not been reported. A significant difference in the N fate in response to the type of organic materials was observed in the uptake rate by rice plants. The uptake rate at the maturity stage was significantly higher in poultry manure (29%), swine feces (25%), and rice bran (26%) than for the other organic materials (6-13%). Cattle manure compost showed the lowest value, namely 6-7%. Using the uptake rate of ( 15 NH 4 ) 2 SO 4 observed earlier, the relative efficiency of organ nic materials (relative uptake rate of organic material N to chemical fertilizer N) was calculated as the index of the organic material N efficiency. These relative efficiencies of organic materials derived from animal wastes were 16-19, 81, 72, and 71% for cattle manure compost, poultry manure compost, poultry manure compost without inherent NH 4 -H, and swine feces, respectively, and were similar to those estimated by indirect way. The relative efficiencies of organic materials derived from plant residues were 25-31, 73, 33 and 34% for rice straw compost, rice bran, rice straw, and wheat straw, respectively. The N uptake from the organic materials (OM-N uptake) in swine feces and cattle manure compost continued throughout the rice growth period, whereas the OM-N uptake of the other organic materials declined remarkably after 54 DAT. No significant difference was observed in the residual rate and the loss rate among the organic materials. However, some tendencies that might be related to the

Clinical research ethics review process in Lebanon: efficiency and functions of research ethics committees - results from a descriptive questionnaire-based study.

Science.gov (United States)

Atallah, David; Moubarak, Malak; El Kassis, Nadine; Abboud, Sara

2018-01-11

Clinical trials conducted in Lebanon are increasing. However, little is known about the performance of research ethics committees (RECs) in charge of reviewing the research protocols. This study aimed to assess the level of adherence to the ethics surrounding the conduct of clinical trials and perceptions of team members regarding roles of the RECs during the conduct of clinical trials in Lebanon. The research question was: Are RECs adherent to the ethics surrounding the conduct of clinical trials (chapters II and IV in 'Standards and Operational Guidance for Ethics Review of Health-related Research with Human Participants' in Lebanon?' This was a quantitative and descriptive questionnaire-based study conducted among RECs of university hospitals in Lebanon. The questionnaire had to be completed online and included general questions in addition to items reflecting the different aspects of a REC performance and effectiveness. All the questionnaire was assigned a total score of 175 points. General information and questions assigned point values/scores were analysed using descriptive statistics: frequency and percentage, mean score ± standard deviation. Ten RECs participated in the study (52 persons: four chairs, one vice-president, 47 ordinary members). Forty-seven (90.4%) had previous experience with clinical research and 30 (57.7%) had a diploma or had done a training in research ethics. Forty-one percent confirmed that they were required to have a training in research ethics. All RECs had a policy for disclosing and managing potential conflicts of interest for its members, but 71.8% of participants reported the existence of such a policy for researchers. Thirty-three point three percent reported that the RECs had an anti-bribery policy. The questionnaire mean score was 129.6 ± 22.3/175 points reflecting thus an excellent adherence to international standards. Inadequate training of REC members and the lack of anti-bribery policies should be resolved to

Use Conditions and Efficiency Measurements of DC Power Optimizers for Photovoltaic Systems: Preprint

Energy Technology Data Exchange (ETDEWEB)

Deline, C.; MacAlpine, S.

2013-10-01

No consensus standard exists for estimating annual conversion efficiency of DC-DC converters or power optimizers in photovoltaic (PV) applications. The performance benefits of PV power electronics including per-panel DC-DC converters depend in large part on the operating conditions of the PV system, along with the performance characteristics of the power optimizer itself. This work presents acase study of three system configurations that take advantage of the capabilities of DC power optimizers. Measured conversion efficiencies of DC-DC converters are applied to these scenarios to determine the annual weighted operating efficiency. A simplified general method of reporting weighted efficiency is given, based on the California Energy Commission's CEC efficiency rating and severalinput / output voltage ratios. Efficiency measurements of commercial power optimizer products are presented using the new performance metric, along with a description of the limitations of the approach.

Marketing energy-efficient solar houses: A method to locate and identify people who will buy energy-efficient solar houses, or related services

International Nuclear Information System (INIS)

D'Alessio, G.

1999-01-01

Houses built in New England within the last six years, equal to or exceeding energy-efficiency standards from Energy Crafted Homes (ECH) or from DOE's Energy Star Homes are termed energy-efficient for this study. An assumption is that people who purchase houses being newly constructed may request special features including more energy-efficient features. The average house being constructed today is not as energy-efficient as it could easily be; therefore, owners of recently constructed energy-efficient houses may be termed early-adopters of an innovation. It has been demonstrated that early adopters have different personal attitudes and perceptions of an innovation compared to later-adopters. Both types of adopters--owners of recently constructed energy-efficient or energy-inefficient houses, have been surveyed in New England to determine whether their differences are significant enough to be used in identifying future potential early-adopters. Solar houses also are usually energy-efficient, and should be termed an innovation

Waste receiving and processing plant control system; system design description

Energy Technology Data Exchange (ETDEWEB)

LANE, M.P.

1999-02-24

The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.

Waste receiving and processing plant control system; system design description

International Nuclear Information System (INIS)

LANE, M.P.

1999-01-01

The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1

Novel Approach to Increase the Energy-related Process Efficiency and Performance of Laser Brazing

Science.gov (United States)

Mittelstädt, C.; Seefeld, T.; Radel, T.; Vollertsen, F.

Although laser brazing is well established, the energy-related efficiency of this joining method is quite low. That is because of low absorptivity of solid-state laser radiation, especially when copper base braze metals are used. Conventionally the laser beam is set close to the vertical axis and the filler wire is delivered under a flat angle. Therefore, the most of the utilized laser power is reflected and thus left unexploited. To address this situation an alternative processing concept for laser brazing, where the laser beam is leading the filler wire, has been investigated intending to make use of reflected shares of the laser radiation. Process monitoring shows, that the reflection of the laser beam can be used purposefully to preheat the substrate which is supporting the wetting and furthermore increasing the efficiency of the process. Experiments address a standard application from the automotive industry joining zinc coated steels using CuSi3Mn1 filler wire. Feasibility of the alternative processing concept is demonstrated, showing that higher processing speeds can be attained, reducing the required energy per unit length while maintaining joint properties.

THE IMPLEMENTATION OF EFFICIENT TRADE MATRIX AND GOLD RESERVE REQUIREMENT FOR COMMODITY TRADE AMONG ASEAN COUNTRIES

OpenAIRE

nurul anisak

2017-01-01

Objective - This study attempts to implement the efficient trade matrix among five selected ASEAN countries and its settlement by the gold reserve requirements through Multi-Bilateral Payments Arrangement (MBPA).Methods – The study is a qualitative research with analytic description. The purpose of this qualitative-descriptive study is to simulate the implementation of gold in the Multi-Bilateral Payment Arrangement among ASEAN countries using the current trade data.Results – This paper argue...

An efficient coupled polynomial interpolation scheme for shear mode sandwich beam finite element

Directory of Open Access Journals (Sweden)

Litesh N. Sulbhewar

Full Text Available An efficient piezoelectric sandwich beam finite element is presented here. It employs the coupled polynomial field interpolation scheme for field variables which incorporates electromechanical coupling at interpolation level itself; unlike conventional sandwich beam theory (SBT based formulations available in the literature. A variational formulation is used to derive the governing equations, which are used to establish the relationships between field variables. These relations lead to the coupled polynomial field descriptions of variables, unlike conventional SBT formulations which use assumed independent polynomials. The relative axial displacement is expressed only by coupled terms containing contributions from other mechanical and electrical variables, thus eliminating use of the transverse displacement derivative as a degree of freedom. A set of coupled shape function based on these polynomials has shown the improvement in the convergence characteristics of the SBT based formulation. This improvement in the performance is achieved with one nodal degree of freedom lesser than the conventional SBT formulations.

Rule Induction-Based Knowledge Discovery for Energy Efficiency

OpenAIRE

Chen, Qipeng; Fan, Zhong; Kaleshi, Dritan; Armour, Simon M D

2015-01-01

Rule induction is a practical approach to knowledge discovery. Provided that a problem is developed, rule induction is able to return the knowledge that addresses the goal of this problem as if-then rules. The primary goals of knowledge discovery are for prediction and description. The rule format knowledge representation is easily understandable so as to enable users to make decisions. This paper presents the potential of rule induction for energy efficiency. In particular, three rule induct...

Geometric description of images as topographic maps

CERN Document Server

Caselles, Vicent

2010-01-01

This volume discusses the basic geometric contents of an image and presents a tree data structure to handle those contents efficiently. The nodes of the tree are derived from connected components of level sets of the intensity, while the edges represent inclusion information. Grain filters, morphological operators simplifying these geometric contents, are analyzed and several applications to image comparison and registration, and to edge and corner detection, are presented. The mathematically inclined reader may be most interested in Chapters 2 to 6, which generalize the topological Morse description to continuous or semicontinuous functions, while mathematical morphologists may more closely consider grain filters in Chapter 3. Computer scientists will find algorithmic considerations in Chapters 6 and 7, the full justification of which may be found in Chapters 2 and 4 respectively. Lastly, all readers can learn more about the motivation for this work in the image processing applications presented in Chapter 8...

Hydraulic Darrieus turbines efficiency for free fluid flow conditions versus power farms conditions

Energy Technology Data Exchange (ETDEWEB)

Antheaume, Sylvain [Electricite de France, Recherche et Developpement, Laboratoire National d' Hydraulique et Environnement, 6 Quai Watier, 78400 Chatou (France); Maitre, Thierry; Achard, Jean-Luc [Laboratoire des Ecoulements Geophysiques et Industriels, BP 53, 38041 Grenoble (France)

2008-10-15

The present study deals with the efficiency of cross flow water current turbine for free stream conditions versus power farm conditions. In the first part, a single turbine for free fluid flow conditions is considered. The simulations are carried out with a new in house code which couples a Navier-Stokes computation of the outer flow field with a description of the inner flow field around the turbine. The latter is based on experimental results of a Darrieus wind turbine in an unbounded domain. This code is applied for the description of a hydraulic turbine. In the second part, the interest of piling up several turbines on the same axis of rotation to make a tower is investigated. Not only is it profitable because only one alternator is needed but the simulations demonstrate the advantage of the tower configuration for the efficiency. The tower is then inserted into a cluster of several lined up towers which makes a barge. Simulations show that the average barge efficiency rises as the distance between towers is decreased and as the number of towers is increased within the row. Thereby, the efficiency of a single isolated turbine is greatly increased when set both into a tower and into a cluster of several towers corresponding to possible power farm arrangements. (author)

Evidence-informed health policy 4 – Case descriptions of organizations that support the use of research evidence

Directory of Open Access Journals (Sweden)

Oxman Andrew D

2008-12-01

Full Text Available Abstract Background Previous efforts to produce case descriptions have typically not focused on the organizations that produce research evidence and support its use. External evaluations of such organizations have typically not been analyzed as a group to identify the lessons that have emerged across multiple evaluations. Case descriptions offer the potential for capturing the views and experiences of many individuals who are familiar with an organization, including staff, advocates, and critics. Methods We purposively sampled a subgroup of organizations from among those that participated in the second (interview phase of the study and (once from among other organizations with which we were familiar. We developed and pilot-tested a case description data collection protocol, and conducted site visits that included both interviews and documentary analyses. Themes were identified from among responses to semi-structured questions using a constant comparative method of analysis. We produced both a brief (one to two pages written description and a video documentary for each case. Results We conducted 51 interviews as part of the eight site visits. Two organizational strengths were repeatedly cited by individuals participating in the site visits: use of an evidence-based approach (which was identified as being very time-consuming and existence of a strong relationship between researchers and policymakers (which can be challenged by conflicts of interest. Two organizational weaknesses – a lack of resources and the presence of conflicts of interest – were repeatedly cited by individuals participating in the site visits. Participants offered two main suggestions for the World Health Organization (and other international organizations and networks: 1 mobilize one or more of government support, financial resources, and the participation of both policymakers and researchers; and 2 create knowledge-related global public goods. Conclusion The findings from

The effect of right ventricular pacing on myocardial oxidative metabolism and efficiency: relation with left ventricular dyssynchrony

Energy Technology Data Exchange (ETDEWEB)

Ukkonen, Heikki; Saraste, Antti; Koistinen, Juhani [Turku University Hospital, Department of Medicine, P.O. Box 52, Turku (Finland); Tops, Laurens; Bax, Jeroen [Leiden University Medical Center, Leiden (Netherlands); Naum, Alexander [University of Turku, Turku PET Centre, Turku (Finland); Knuuti, Juhani [University of Turku, Turku PET Centre, Turku (Finland); Turku University Hospital, Turku PET Centre, P.O. Box 52, Turku (Finland)

2009-12-15

Right ventricular (RV) apical pacing induces dyssynchrony by a left bundle branch block type electrical activation sequence in the heart and may impair left ventricular (LV) function. Whether these functional changes are accompanied by changes in myocardial perfusion, oxidative metabolism and efficiency, and the relation with the induction of LV dyssynchrony are unknown. Our study was designed to investigate the acute effects of RV pacing on these parameters. Ten patients with normal LV ejection fraction and VVI/DDD pacemaker were studied during AAI pacing/sinus rhythm without RV pacing (pacing-OFF) and with RV pacing (pacing-ON) at the same heart rate. Dynamic [{sup 15}O]water and [{sup 11}C]acetate positron emission tomography was used to measure perfusion and oxidative metabolism (k{sub mono}) of the LV. An echocardiographic examination was used to assess LV stroke volume (SV) and LV dyssynchrony. Myocardial efficiency of forward work was calculated as systolic blood pressure x cardiac output/LV mass/k{sub mono}. RV pacing decreased SV in all subjects (mean decrease 13%, from 76 {+-} 7 to 66 {+-} 7 ml, p = 0.004), but global perfusion and k{sub mono} were unchanged. The efficiency tended to be lower with pacing-ON (70 {+-} 20 vs 81 {+-} 21 mmHg l/g, p = 0.066). In patients with dyssynchrony during pacing (n = 6) efficiency decreased by 23% (from 78 {+-} 25 to 60 {+-} 14 mmHg l/g, p = 0.02), but in patients without dyssynchrony no change in efficiency was detected. Accordingly, heterogeneity in myocardial perfusion and oxidative metabolism was detected during pacing in patients with dyssynchrony but not in those without dyssynchrony. RV pacing resulted in a significant decrease in SV. However, deleterious effects on LV oxidative metabolism and efficiency were observed only in patients with dyssynchrony during RV pacing. (orig.)

Special theory of relativity

CERN Document Server

Kilmister, Clive William

1970-01-01

Special Theory of Relativity provides a discussion of the special theory of relativity. Special relativity is not, like other scientific theories, a statement about the matter that forms the physical world, but has the form of a condition that the explicit physical theories must satisfy. It is thus a form of description, playing to some extent the role of the grammar of physics, prescribing which combinations of theoretical statements are admissible as descriptions of the physical world. Thus, to describe it, one needs also to describe those specific theories and to say how much they are limit

Energy Efficiency Improvement and Cost Saving Opportunities for the Pharmaceutical Industry. An ENERGY STAR Guide for Energy and Plant Managers

Energy Technology Data Exchange (ETDEWEB)

Galitsky, Christina; Galitsky, Christina; Chang, Sheng-chieh; Worrell, Ernst; Masanet, Eric

2008-03-01

The U.S. pharmaceutical industry consumes almost $1 billion in energy annually. Energy efficiency improvement is an important way to reduce these costs and to increase predictable earnings, especially in times of high energy price volatility. There are a variety of opportunities available at individual plants in the U.S. pharmaceutical industry to reduce energy consumption in a cost-effective manner. This Energy Guide discusses energy efficiency practices and energy efficient technologies that can be implemented at the component, process, system, and organizational levels. A discussion of the trends, structure, and energy consumption characteristics of the U.S. pharmaceutical industry is provided along with a description of the major process steps in the pharmaceutical manufacturing process. Expected savings in energy and energy-related costs are given for many energy efficiency measures, based on case study data from real-world applications in pharmaceutical and related facilities worldwide. Typical measure payback periods and references to further information in the technical literature are also provided, when available. The information in this Energy Guide is intended to help energy and plant managers reduce energy consumption in a cost-effective manner while meeting regulatory requirements and maintaining the quality of products manufactured. At individual plants, further research on the economics of the measures?as well as their applicability to different production practices?is needed to assess potential implementation of selected technologies.

Estimation of hospital efficiency--do different definitions and casemix measures for hospital output affect the results?

Science.gov (United States)

Vitikainen, Kirsi; Street, Andrew; Linna, Miika

2009-02-01

Hospital efficiency has been the subject of numerous health economics studies, but there is little evidence on how the chosen output and casemix measures affect the efficiency results. The aim of this study is to examine the robustness of efficiency results due to these factors. Comparison is made between activities and episode output measures, and two different output grouping systems (Classic and FullDRG). Non-parametric data envelopment analysis is used as an analysis technique. The data consist of all public acute care hospitals in Finland in 2005 (n=40). Efficiency estimates were not found to be highly sensitive to the choice between episode and activity descriptions of output, but more so to the choice of DRG grouping system. Estimates are most sensitive to scale assumptions, with evidence of decreasing returns to scale in larger hospitals. Episode measures are generally to be preferred to activity measures because these better capture the patient pathway, while FullDRGs are preferred to Classic DRGs particularly because of the better description of outpatient output in the former grouping system. Attention should be paid to reducing the extent of scale inefficiency in Finland.

Intrinsic default mode network connectivity predicts spontaneous verbal descriptions of autobiographical memories during social processing

Directory of Open Access Journals (Sweden)

Xiao-Fei eYang

2013-01-01

Full Text Available Neural systems activated in a coordinated way during rest, known as the default mode network (DMN, also support autobiographical memory (AM retrieval and social processing/mentalizing. However, little is known about how individual variability in reliance on personal memories during social processing relates to individual differences in DMN functioning during rest (intrinsic functional connectivity. Here we examined 18 participants’ spontaneous descriptions of autobiographical memories during a two-hour, private, open-ended interview in which they reacted to a series of true stories about real people’s social situations and responded to the prompt, how does this person’s story make you feel? We classified these descriptions as either containing factual information (semantic AMs or more elaborate descriptions of emotionally meaningful events (episodic AMs. We also collected resting state fMRI scans from the participants and related individual differences in frequency of described AMs to participants’ intrinsic functional connectivity within regions of the DMN. We found that producing more descriptions of either memory type correlated with stronger intrinsic connectivity in the parahippocampal and middle temporal gyri. Additionally, episodic AM descriptions correlated with connectivity in the bilateral hippocampi and medial prefrontal cortex, and semantic memory descriptions correlated with connectivity in right inferior lateral parietal cortex. These findings suggest that in individuals who naturally invoke more memories during social processing, brain regions involved in memory retrieval and self/social processing are more strongly coupled to the DMN during rest.

An efficient algorithm to perform local concerted movements of a chain molecule.

Directory of Open Access Journals (Sweden)

Stefano Zamuner

Full Text Available The devising of efficient concerted rotation moves that modify only selected local portions of chain molecules is a long studied problem. Possible applications range from speeding the uncorrelated sampling of polymeric dense systems to loop reconstruction and structure refinement in protein modeling. Here, we propose and validate, on a few pedagogical examples, a novel numerical strategy that generalizes the notion of concerted rotation. The usage of the Denavit-Hartenberg parameters for chain description allows all possible choices for the subset of degrees of freedom to be modified in the move. They can be arbitrarily distributed along the chain and can be distanced between consecutive monomers as well. The efficiency of the methodology capitalizes on the inherent geometrical structure of the manifold defined by all chain configurations compatible with the fixed degrees of freedom. The chain portion to be moved is first opened along a direction chosen in the tangent space to the manifold, and then closed in the orthogonal space. As a consequence, in Monte Carlo simulations detailed balance is easily enforced without the need of using Jacobian reweighting. Moreover, the relative fluctuations of the degrees of freedom involved in the move can be easily tuned. We show different applications: the manifold of possible configurations is explored in a very efficient way for a protein fragment and for a cyclic molecule; the "local backbone volume", related to the volume spanned by the manifold, reproduces the mobility profile of all-α helical proteins; the refinement of small protein fragments with different secondary structures is addressed. The presented results suggest our methodology as a valuable exploration and sampling tool in the context of bio-molecular simulations.

Problem of identifying an object in a robotics scene from an imprecise verbal description

Energy Technology Data Exchange (ETDEWEB)

Farreny, H; Prade, H

1983-01-01

The authors investigate the problem of relating imprecise and incomplete verbal descriptions to noisy high-level features supplied by an image analyzer. Pattern-matching problems are specially addressed. The proposed approach allows the direct processing of human-like descriptions. Moreover, the imprecision due to the use of natural language expressions or to the noisiness of the image analyzer, is taken into account. 26 references.

Energy Efficiency Center - Overview

International Nuclear Information System (INIS)

Obryk, E.

2000-01-01

Full text: The Energy Efficiency Center (EEC) activities have been concentrated on Energy Efficiency Network (SEGE), education and training of energy auditors. EEC has started studies related to renewable fuels (bio fuel, wastes) and other topics related to environment protection. EEC has continued close collaboration with Institute for Energy Technology, Kjeller, Norway. It has been organized and conducted Seminar and Workshop on ''How to Reduce Energy and Water Cost in Higher Education Buildings'' for general and technical managers of the higher education institutions. This Seminar was proceeded by the working meeting on energy efficiency strategy in higher education at the Ministry of National Education. EEC has worked out proposal for activities of Cracow Regional Agency for Energy Efficiency and Environment and has made offer to provide services for this Agency in the field of training, education and consulting. The vast knowledge and experiences in the field of energy audits have been used by the members of EEC in lecturing at energy auditors courses authorized by the National Energy Efficiency Agency (KAPE). Altogether 20 lectures have been delivered. (author)

Efficient lossy compression implementations of hyperspectral images: tools, hardware platforms, and comparisons

Science.gov (United States)

García, Aday; Santos, Lucana; López, Sebastián.; Callicó, Gustavo M.; Lopez, Jose F.; Sarmiento, Roberto

2014-05-01

Efficient onboard satellite hyperspectral image compression represents a necessity and a challenge for current and future space missions. Therefore, it is mandatory to provide hardware implementations for this type of algorithms in order to achieve the constraints required for onboard compression. In this work, we implement the Lossy Compression for Exomars (LCE) algorithm on an FPGA by means of high-level synthesis (HSL) in order to shorten the design cycle. Specifically, we use CatapultC HLS tool to obtain a VHDL description of the LCE algorithm from C-language specifications. Two different approaches are followed for HLS: on one hand, introducing the whole C-language description in CatapultC and on the other hand, splitting the C-language description in functional modules to be implemented independently with CatapultC, connecting and controlling them by an RTL description code without HLS. In both cases the goal is to obtain an FPGA implementation. We explain the several changes applied to the original Clanguage source code in order to optimize the results obtained by CatapultC for both approaches. Experimental results show low area occupancy of less than 15% for a SRAM-based Virtex-5 FPGA and a maximum frequency above 80 MHz. Additionally, the LCE compressor was implemented into an RTAX2000S antifuse-based FPGA, showing an area occupancy of 75% and a frequency around 53 MHz. All these serve to demonstrate that the LCE algorithm can be efficiently executed on an FPGA onboard a satellite. A comparison between both implementation approaches is also provided. The performance of the algorithm is finally compared with implementations on other technologies, specifically a graphics processing unit (GPU) and a single-threaded CPU.

On the Computation of the Efficient Frontier of the Portfolio Selection Problem

Directory of Open Access Journals (Sweden)

Clara Calvo

2012-01-01

Full Text Available An easy-to-use procedure is presented for improving the ε-constraint method for computing the efficient frontier of the portfolio selection problem endowed with additional cardinality and semicontinuous variable constraints. The proposed method provides not only a numerical plotting of the frontier but also an analytical description of it, including the explicit equations of the arcs of parabola it comprises and the change points between them. This information is useful for performing a sensitivity analysis as well as for providing additional criteria to the investor in order to select an efficient portfolio. Computational results are provided to test the efficiency of the algorithm and to illustrate its applications. The procedure has been implemented in Mathematica.

How to Improve Water Usage Efficiency? Characterization of Family Farms in A Semi-Arid Area

Directory of Open Access Journals (Sweden)

Laura Piedra-Muñoz

2017-10-01

Full Text Available Water scarcity in Spain is partly due to poor management of this resource in the agricultural sector. The main aim of this study is to present the major factors related to water usage efficiency in farming. It focuses on the Almería coast, southeast Spain, which is one of the most arid areas of the country, and in particular, on family farms as the main direct managers of water use in this zone. Many of these farms are among the most water efficient in Spanish agriculture but this efficiency is not generalized throughout the sector. This work conducts a comprehensive assessment of water performance in this area, using on-farm water-use, structural, socio-economic, and environmental information. Two statistical techniques are used: descriptive analysis and cluster analysis. Thus, two groups are identified: farms that are less and farms that are more efficient regarding water usage. By analyzing both the common characteristics within each group and the differences between the groups with a one-way ANOVA analysis, several conclusions can be reached. The main differences between the two clusters center on the extent to which innovation and new technologies are used in irrigation. The most water efficient farms are characterized by more educated farmers, a greater degree of innovation, new irrigation technology, and an awareness of water issues and environmental sustainability. The findings of this study can be extended to farms in similar arid and semi-arid areas and contribute to fostering appropriate policies to improve the efficiency of water usage in the agricultural sector.

Tendency of description of nuclear and radiation-related matters in recent textbooks used at senior high schools in Japan

International Nuclear Information System (INIS)

Matsuura, Tatsuo; Iiri, Yuichi; Sekimoto, Junko; Takagi, Shinji

2001-01-01

This report describes results of reviewing the description concerning to nuclear power or radiation found in about 90 volumes of textbooks of science (general science, physics, chemistry, etc.) and social studies (current social studies, politics and economics), geography and history, and health and athletics, published in the fiscal year 1997 through 1999. Considerable improvement, especially in the textbooks of science studies, was found in comparison with the previous review carried out for the 236 textbooks which were published before, during 1991 through 1996. In these books, scientifically correct and appropriate descriptions are being made for the fundamental knowledge nuclear energy, radiation units, natural radiation and radioactivity, radiation effects for human bodies, and radiation utilization. On the other hand, however, it was found that fear for nuclear or radiation safety still prevails in several textbooks of social studies. For example, nuclear accident of Chernobyl nuclear power station is cited in 70% of the books reviewed, as the large demerit of nuclear power as an energy source, and some description are made based on incorrect scientific data and biased information. The authors analyzed the present situation from various educational standpoints, and presented several proposals for improving the situation. (author)

Tendency of description of nuclear and radiation-related matters in recent textbooks used at senior high schools in Japan

Energy Technology Data Exchange (ETDEWEB)

Matsuura, Tatsuo [Radiation Education Forum (Japan); Iiri, Yuichi; Sekimoto, Junko [Japan Atomic Industrial Forum, Inc., Tokyo (Japan); Takagi, Shinji [Faculty of Science, Kanagawa University, Yokohama, Kanagawa (Japan)

2001-05-01

This report describes results of reviewing the description concerning to nuclear power or radiation found in about 90 volumes of textbooks of science (general science, physics, chemistry, etc.) and social studies (current social studies, politics and economics), geography and history, and health and athletics, published in the fiscal year 1997 through 1999. Considerable improvement, especially in the textbooks of science studies, was found in comparison with the previous review carried out for the 236 textbooks which were published before, during 1991 through 1996. In these books, scientifically correct and appropriate descriptions are being made for the fundamental knowledge nuclear energy, radiation units, natural radiation and radioactivity, radiation effects for human bodies, and radiation utilization. On the other hand, however, it was found that fear for nuclear or radiation safety still prevails in several textbooks of social studies. For example, nuclear accident of Chernobyl nuclear power station is cited in 70% of the books reviewed, as the large demerit of nuclear power as an energy source, and some description are made based on incorrect scientific data and biased information. The authors analyzed the present situation from various educational standpoints, and presented several proposals for improving the situation. (author)

Tuning the relative concentration ratio of bulk defects to surface defects in TiO2 nanocrystals leads to high photocatalytic efficiency.

Science.gov (United States)

Kong, Ming; Li, Yuanzhi; Chen, Xiong; Tian, Tingting; Fang, Pengfei; Zheng, Feng; Zhao, Xiujian

2011-10-19

TiO(2) nanocrystals with tunable bulk/surface defects were synthesized and characterized with TEM, XRD, BET, positron annihilation, and photocurrent measurements. The effect of defects on photocatalytic activity was studied. It was found for the first time that decreasing the relative concentration ratio of bulk defects to surface defects in TiO(2) nanocrystals could significantly improve the separation efficiency of photogenerated electrons and holes, thus significantly enhancing the photocatalytic efficiency.

Assessment of accountability and safeguards efficiencies

International Nuclear Information System (INIS)

McCormick, N.J.; Erdmann, R.C.

1975-01-01

Accountability and safeguards problems fall into the class of problems of searches for an anomaly, which in this case happens to be either an undesired amount of special nuclear material (SNM) in a specimen or the person or parcel which possesses SNM which is being removed surreptitiously. In such searches, principles from information theory can be used to relate the relative efficiency of the search itself to the relative efficiency of the detector. Such correlations are examined and provide some insight into the improvement of the search potentially available from an altered detector efficiency. Example calculations are presented

Audio Description as a Pedagogical Tool

Directory of Open Access Journals (Sweden)

Georgina Kleege

2015-05-01

Full Text Available Audio description is the process of translating visual information into words for people who are blind or have low vision. Typically such description has focused on films, museum exhibitions, images and video on the internet, and live theater. Because it allows people with visual impairments to experience a variety of cultural and educational texts that would otherwise be inaccessible, audio description is a mandated aspect of disability inclusion, although it remains markedly underdeveloped and underutilized in our classrooms and in society in general. Along with increasing awareness of disability, audio description pushes students to practice close reading of visual material, deepen their analysis, and engage in critical discussions around the methodology, standards and values, language, and role of interpretation in a variety of academic disciplines. We outline a few pedagogical interventions that can be customized to different contexts to develop students' writing and critical thinking skills through guided description of visual material.

Drawing skill is related to the efficiency of encoding object structure.

Science.gov (United States)

Perdreau, Florian; Cavanagh, Patrick

2014-01-01

Accurate drawing calls on many skills beyond simple motor coordination. A good internal representation of the target object's structure is necessary to capture its proportion and shape in the drawing. Here, we assess two aspects of the perception of object structure and relate them to participants' drawing accuracy. First, we assessed drawing accuracy by computing the geometrical dissimilarity of their drawing to the target object. We then used two tasks to evaluate the efficiency of encoding object structure. First, to examine the rate of temporal encoding, we varied presentation duration of a possible versus impossible test object in the fovea using two different test sizes (8° and 28°). More skilled participants were faster at encoding an object's structure, but this difference was not affected by image size. A control experiment showed that participants skilled in drawing did not have a general advantage that might have explained their faster processing for object structure. Second, to measure the critical image size for accurate classification in the periphery, we varied image size with possible versus impossible object tests centered at two different eccentricities (3° and 8°). More skilled participants were able to categorise object structure at smaller sizes, and this advantage did not change with eccentricity. A control experiment showed that the result could not be attributed to differences in visual acuity, leaving attentional resolution as a possible explanation. Overall, we conclude that drawing accuracy is related to faster encoding of object structure and better access to crowded details.

Content analyses of a priori qualitative phantom limb pain descriptions and emerging categories in mid-southerners with limb loss.

Science.gov (United States)

Evans, Cecile B

2014-01-01

The purposes of this descriptive study were (a) to identify the relative frequencies of a priori categories of phantom limb pain (PLP) quality descriptors reported by Mid-Southerners with limb loss, (b) to analyze their descriptions for emerging categories of PLP, and (c) to identify the relative frequencies of the emerging categories. This cross-sectional descriptive verbal survey assessed PLP descriptors. A content analyses determined relative frequencies of a priori PLP descriptors as well as emerging categories that were identified. The most common a priori PLP quality descriptors reported by 52 amputees with PLP were intermittent, tingling/needles/numb, sharp, cramping, burning, and stabbing. The most common emerging categories reported were pain compared to illness/injury, electrical cyclical, and manipulated/positional. The detailed descriptions of PLP provide insight into the vivid experiences of PLP. Rehabilitation nurses can use this information with PLP assessment, patient teaching, and counseling. © 2013 Association of Rehabilitation Nurses.

Fuel efficiency of conventional design tractors diesel engines in relation to new design

Directory of Open Access Journals (Sweden)

Jevtić Jeremija

2006-01-01

Full Text Available Total consumption of all types of energies is rather high nowadays with constant tendency of increasing. Transport section is one of the highest consumers of energy obtained from fossil fuels. It is absolutely clear that the reduction of energy consumption and the protection of environment - exhaust emission reduction, i. e. cleaner air, will be one of the main tasks of automotive industry in the first decades of the 21st century. In spite of its superiority over the petrol engine in respect of the fuel consumption, a diesel engine "suffers" from the increased exhaust emission, particles and NOx first of all and also from the noise and vibrations. The paper gives a review of fuel efficiency of conventional design tractors diesel engines in relation to new design. .

Description and validation of the Simple, Efficient, Dynamic, Global, Ecological Simulator (SEDGES v.1.0)

Science.gov (United States)

Paiewonsky, Pablo; Elison Timm, Oliver

2018-03-01

In this paper, we present a simple dynamic global vegetation model whose primary intended use is auxiliary to the land-atmosphere coupling scheme of a climate model, particularly one of intermediate complexity. The model simulates and provides important ecological-only variables but also some hydrological and surface energy variables that are typically either simulated by land surface schemes or else used as boundary data input for these schemes. The model formulations and their derivations are presented here, in detail. The model includes some realistic and useful features for its level of complexity, including a photosynthetic dependency on light, full coupling of photosynthesis and transpiration through an interactive canopy resistance, and a soil organic carbon dependence for bare-soil albedo. We evaluate the model's performance by running it as part of a simple land surface scheme that is driven by reanalysis data. The evaluation against observational data includes net primary productivity, leaf area index, surface albedo, and diagnosed variables relevant for the closure of the hydrological cycle. In this setup, we find that the model gives an adequate to good simulation of basic large-scale ecological and hydrological variables. Of the variables analyzed in this paper, gross primary productivity is particularly well simulated. The results also reveal the current limitations of the model. The most significant deficiency is the excessive simulation of evapotranspiration in mid- to high northern latitudes during their winter to spring transition. The model has a relative advantage in situations that require some combination of computational efficiency, model transparency and tractability, and the simulation of the large-scale vegetation and land surface characteristics under non-present-day conditions.

4 CFR 202.1 - Description.

Science.gov (United States)

2010-01-01

... further encircled by a ring bearing the gold-colored words “RECOVERY ACCOUNTABILITY AND TRANSPARENCY... 4 Accounts 1 2010-01-01 2010-01-01 false Description. 202.1 Section 202.1 Accounts RECOVERY ACCOUNTABILITY AND TRANSPARENCY BOARD OFFICIAL SEAL § 202.1 Description. (a) The official seal of the Recovery...

Incidence and Consequences of Near-Drowning–Related Pneumonia—A Descriptive Series from Martinique, French West Indies

Directory of Open Access Journals (Sweden)

Laura Cerland

2017-11-01

Full Text Available Drowning represents one major cause of accidental death. Near-drowning patients are exposed to aspiration that may result in pneumonia with life-threatening consequences. We designed this descriptive study to investigate the frequency, nature, and consequences of post-drowning pneumonia. One hundred and forty-four near-drowning patients (33 children and 111 adults admitted during four years to the University Hospital of Martinique, French Indies, were included. Patients presented pre-hospital cardiac arrest (41% and exhibited acute respiratory failure (54%, cardiovascular failure (27%, and lactic acidosis (75% on admission. Empirical antibiotics, as decided by the physicians in charge, were administered in 85 patients (59%. Post-drowning early onset bacterial pneumonia was diagnosed as “possible” in 13 patients (9% and “confirmed” in 22 patients (15%. Tracheal aspiration revealed the presence of polymorphous pharyngeal flora (59% or one predominant bacteria species (41% including Enterobacter aerogenes, Enterobacter cloacae, Staphylococcus aureus, Pseudomonas aeruginosa, Aeromonas hydrophilia, and Morganella morgani. Despite adequate supportive care, drowning resulted in 45 fatalities (31%. Early onset bacterial aspiration pneumonia (either possible or confirmed did not significantly influence the risk of death. In conclusion, near-drowning–related bacterial aspiration pneumonia seems rare and does not influence the mortality rate. There is still a need for practice standardization to improve diagnosis of post-drowning pneumonia and near-drowning patient management.

Incidence and Consequences of Near-Drowning–Related Pneumonia—A Descriptive Series from Martinique, French West Indies

Science.gov (United States)

Cerland, Laura; Mégarbane, Bruno; Kallel, Hatem; Brouste, Yanick

2017-01-01

Drowning represents one major cause of accidental death. Near-drowning patients are exposed to aspiration that may result in pneumonia with life-threatening consequences. We designed this descriptive study to investigate the frequency, nature, and consequences of post-drowning pneumonia. One hundred and forty-four near-drowning patients (33 children and 111 adults) admitted during four years to the University Hospital of Martinique, French Indies, were included. Patients presented pre-hospital cardiac arrest (41%) and exhibited acute respiratory failure (54%), cardiovascular failure (27%), and lactic acidosis (75%) on admission. Empirical antibiotics, as decided by the physicians in charge, were administered in 85 patients (59%). Post-drowning early onset bacterial pneumonia was diagnosed as “possible” in 13 patients (9%) and “confirmed” in 22 patients (15%). Tracheal aspiration revealed the presence of polymorphous pharyngeal flora (59%) or one predominant bacteria species (41%) including Enterobacter aerogenes, Enterobacter cloacae, Staphylococcus aureus, Pseudomonas aeruginosa, Aeromonas hydrophilia, and Morganella morgani. Despite adequate supportive care, drowning resulted in 45 fatalities (31%). Early onset bacterial aspiration pneumonia (either possible or confirmed) did not significantly influence the risk of death. In conclusion, near-drowning–related bacterial aspiration pneumonia seems rare and does not influence the mortality rate. There is still a need for practice standardization to improve diagnosis of post-drowning pneumonia and near-drowning patient management. PMID:29149019

Incidence and Consequences of Near-Drowning-Related Pneumonia-A Descriptive Series from Martinique, French West Indies.

Science.gov (United States)

Cerland, Laura; Mégarbane, Bruno; Kallel, Hatem; Brouste, Yanick; Mehdaoui, Hossein; Resiere, Dabor

2017-11-17

Drowning represents one major cause of accidental death. Near-drowning patients are exposed to aspiration that may result in pneumonia with life-threatening consequences. We designed this descriptive study to investigate the frequency, nature, and consequences of post-drowning pneumonia. One hundred and forty-four near-drowning patients (33 children and 111 adults) admitted during four years to the University Hospital of Martinique, French Indies, were included. Patients presented pre-hospital cardiac arrest (41%) and exhibited acute respiratory failure (54%), cardiovascular failure (27%), and lactic acidosis (75%) on admission. Empirical antibiotics, as decided by the physicians in charge, were administered in 85 patients (59%). Post-drowning early onset bacterial pneumonia was diagnosed as "possible" in 13 patients (9%) and "confirmed" in 22 patients (15%). Tracheal aspiration revealed the presence of polymorphous pharyngeal flora (59%) or one predominant bacteria species (41%) including Enterobacter aerogenes , Enterobacter cloacae , Staphylococcus aureus , Pseudomonas aeruginosa , Aeromonas hydrophilia , and Morganella morgani . Despite adequate supportive care, drowning resulted in 45 fatalities (31%). Early onset bacterial aspiration pneumonia (either possible or confirmed) did not significantly influence the risk of death. In conclusion, near-drowning-related bacterial aspiration pneumonia seems rare and does not influence the mortality rate. There is still a need for practice standardization to improve diagnosis of post-drowning pneumonia and near-drowning patient management.

Hypothetical Case and Scenario Description for International Transportation of Spent Nuclear Fuel.

Energy Technology Data Exchange (ETDEWEB)

Williams, Adam David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Osborn, Douglas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Katherine A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kalinina, Elena Arkadievna [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Cohn, Brian [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Thomas, Maikael A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Parks, Mancel Jordan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Parks, Ethan Rutledge [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mohagheghi, Amir H. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-12-01

To support more rigorous analysis on global security issues at Sandia National Laboratories (SNL), there is a need to develop realistic data sets without using "real" data or identifying "real" vulnerabilities, hazards or geopolitically embarrassing shortcomings. In response, an interdisciplinary team led by subject matter experts in SNL's Center for Global Security and Cooperation (CGSC) developed a hypothetical case description. This hypothetical case description assigns various attributes related to international SNF transportation that are representative, illustrative and indicative of "real" characteristics of "real" countries. There is no intent to identify any particular country and any similarity with specific real-world events is purely coincidental. To support the goal of this report to provide a case description (and set of scenarios of concern) for international SNF transportation inclusive of as much "real-world" complexity as possible -- without crossing over into politically sensitive or classified information -- this SAND report provides a subject matter expert-validated (and detailed) description of both technical and political influences on the international transportation of spent nuclear fuel. [PAGE INTENTIONALLY LEFT BLANK

Confidence assessment. Site-descriptive modelling SDM-Site Laxemar

International Nuclear Information System (INIS)

2009-06-01

The objective of this report is to assess the confidence that can be placed in the Laxemar site descriptive model, based on the information available at the conclusion of the surface-based investigations (SDM-Site Laxemar). In this exploration, an overriding question is whether remaining uncertainties are significant for repository engineering design or long-term safety assessment and could successfully be further reduced by more surface-based investigations or more usefully by explorations underground made during construction of the repository. Procedures for this assessment have been progressively refined during the course of the site descriptive modelling, and applied to all previous versions of the Forsmark and Laxemar site descriptive models. They include assessment of whether all relevant data have been considered and understood, identification of the main uncertainties and their causes, possible alternative models and their handling, and consistency between disciplines. The assessment then forms the basis for an overall confidence statement. The confidence in the Laxemar site descriptive model, based on the data available at the conclusion of the surface based site investigations, has been assessed by exploring: - Confidence in the site characterization data base, - remaining issues and their handling, - handling of alternatives, - consistency between disciplines and - main reasons for confidence and lack of confidence in the model. Generally, the site investigation database is of high quality, as assured by the quality procedures applied. It is judged that the Laxemar site descriptive model has an overall high level of confidence. Because of the relatively robust geological model that describes the site, the overall confidence in the Laxemar Site Descriptive model is judged to be high, even though details of the spatial variability remain unknown. The overall reason for this confidence is the wide spatial distribution of the data and the consistency between

Confidence assessment. Site-descriptive modelling SDM-Site Laxemar

Energy Technology Data Exchange (ETDEWEB)

2008-12-15

The objective of this report is to assess the confidence that can be placed in the Laxemar site descriptive model, based on the information available at the conclusion of the surface-based investigations (SDM-Site Laxemar). In this exploration, an overriding question is whether remaining uncertainties are significant for repository engineering design or long-term safety assessment and could successfully be further reduced by more surface-based investigations or more usefully by explorations underground made during construction of the repository. Procedures for this assessment have been progressively refined during the course of the site descriptive modelling, and applied to all previous versions of the Forsmark and Laxemar site descriptive models. They include assessment of whether all relevant data have been considered and understood, identification of the main uncertainties and their causes, possible alternative models and their handling, and consistency between disciplines. The assessment then forms the basis for an overall confidence statement. The confidence in the Laxemar site descriptive model, based on the data available at the conclusion of the surface based site investigations, has been assessed by exploring: - Confidence in the site characterization data base, - remaining issues and their handling, - handling of alternatives, - consistency between disciplines and - main reasons for confidence and lack of confidence in the model. Generally, the site investigation database is of high quality, as assured by the quality procedures applied. It is judged that the Laxemar site descriptive model has an overall high level of confidence. Because of the relatively robust geological model that describes the site, the overall confidence in the Laxemar Site Descriptive model is judged to be high, even though details of the spatial variability remain unknown. The overall reason for this confidence is the wide spatial distribution of the data and the consistency between

The appropriateness of XML for diagnostic description

Energy Technology Data Exchange (ETDEWEB)

Neto, A. [Associacao Euratom/IST, Centro de Fusao Nuclear, Av. Rovisco Pais, P-1049-001 Lisboa (Portugal)], E-mail: andre.neto@cfn.ist.utl.pt; Lister, J.B. [CRPP-EPFL, Association EURATOM-Confederation Suisse, 1015 Lausanne (Switzerland); Fernandes, H. [Associacao Euratom/IST, Centro de Fusao Nuclear, Av. Rovisco Pais, P-1049-001 Lisboa (Portugal); Yonekawa, I. [JAEA, Japan Atomic Energy Agency Naka (Japan); Varandas, C.A.F. [Associacao Euratom/IST, Centro de Fusao Nuclear, Av. Rovisco Pais, P-1049-001 Lisboa (Portugal)

2007-10-15

A standard for the self-description of fusion plasma diagnostics will be required in the near future. The motivation is to maintain and organize the information on all the components of a laboratory experiment, from the hardware to the access security, to save time and money. Since there is no existing standard to organize this kind of information, every EU Association stores and organizes each experiment in different ways. This can lead to severe problems when the particular organization schema is poorly documented. Standardization is the key to solve these problems. From the commercial information on the diagnostic (component supplier; component price) to the hardware description (component specifications; drawings) to the operation of the equipment (finite state machines) through change control (who changed what and when) and internationalization (information at least in English and a local language). This problem will be met on the ITER project, for which a solution is essential. A strong candidate solution is the Extensible Markup Language (XML). In this paper, a review of the current status of XML related technologies will be presented.

The appropriateness of XML for diagnostic description

International Nuclear Information System (INIS)

Neto, A.; Lister, J.B.; Fernandes, H.; Yonekawa, I.; Varandas, C.A.F.

2007-01-01

A standard for the self-description of fusion plasma diagnostics will be required in the near future. The motivation is to maintain and organize the information on all the components of a laboratory experiment, from the hardware to the access security, to save time and money. Since there is no existing standard to organize this kind of information, every EU Association stores and organizes each experiment in different ways. This can lead to severe problems when the particular organization schema is poorly documented. Standardization is the key to solve these problems. From the commercial information on the diagnostic (component supplier; component price) to the hardware description (component specifications; drawings) to the operation of the equipment (finite state machines) through change control (who changed what and when) and internationalization (information at least in English and a local language). This problem will be met on the ITER project, for which a solution is essential. A strong candidate solution is the Extensible Markup Language (XML). In this paper, a review of the current status of XML related technologies will be presented

Computerized Italian criticality guide, description and validation

International Nuclear Information System (INIS)

Carotenuto, M.; Landeyro, P.A.

1988-10-01

Our group is developing an 'expert system' for collecting engineering know-how on back-end nuclear plant design. An expert system is the most suitable software tool for our problem. During the analysis, the design process was divided into different branches. At each branch of the design process the Expert System relates a computerized design procedure. Any design procedure is composed of a set of design methods, together with their condition of application and reliability limits. In the framework of this expert system, the nuclear criticality safety analysis procedure was developed, in the form of a computerized criticality guide, attempting to reproduce the designer's normal 'reasoning' process. The criticality guide is composed of two parts: A computerized text, including theory, a description of the accidents occurred in the past and a description of the italian design experience; An interactive computer aided calculation module, containing a graphical facility for critical parameter curves. In the present report are presented the criticality guide (computerized Italian Criticality Guide) and its validation test. (author)

Computerized Italian criticality guide, description and validation

Energy Technology Data Exchange (ETDEWEB)

Carotenuto, M; Landeyro, P A [ENEA - Dipartimento Ciclo del Combustibile, Centro Ricerche Energia, Casaccia (Italy)

1988-10-15

Our group is developing an 'expert system' for collecting engineering know-how on back-end nuclear plant design. An expert system is the most suitable software tool for our problem. During the analysis, the design process was divided into different branches. At each branch of the design process the Expert System relates a computerized design procedure. Any design procedure is composed of a set of design methods, together with their condition of application and reliability limits. In the framework of this expert system, the nuclear criticality safety analysis procedure was developed, in the form of a computerized criticality guide, attempting to reproduce the designer's normal 'reasoning' process. The criticality guide is composed of two parts: A computerized text, including theory, a description of the accidents occurred in the past and a description of the italian design experience; An interactive computer aided calculation module, containing a graphical facility for critical parameter curves. In the present report are presented the criticality guide (computerized Italian Criticality Guide) and its validation test. (author)

Efficiency bounds for nonequilibrium heat engines

International Nuclear Information System (INIS)

Mehta, Pankaj; Polkovnikov, Anatoli

2013-01-01

We analyze the efficiency of thermal engines (either quantum or classical) working with a single heat reservoir like an atmosphere. The engine first gets an energy intake, which can be done in an arbitrary nonequilibrium way e.g. combustion of fuel. Then the engine performs the work and returns to the initial state. We distinguish two general classes of engines where the working body first equilibrates within itself and then performs the work (ergodic engine) or when it performs the work before equilibrating (non-ergodic engine). We show that in both cases the second law of thermodynamics limits their efficiency. For ergodic engines we find a rigorous upper bound for the efficiency, which is strictly smaller than the equivalent Carnot efficiency. I.e. the Carnot efficiency can be never achieved in single reservoir heat engines. For non-ergodic engines the efficiency can be higher and can exceed the equilibrium Carnot bound. By extending the fundamental thermodynamic relation to nonequilibrium processes, we find a rigorous thermodynamic bound for the efficiency of both ergodic and non-ergodic engines and show that it is given by the relative entropy of the nonequilibrium and initial equilibrium distributions. These results suggest a new general strategy for designing more efficient engines. We illustrate our ideas by using simple examples. -- Highlights: ► Derived efficiency bounds for heat engines working with a single reservoir. ► Analyzed both ergodic and non-ergodic engines. ► Showed that non-ergodic engines can be more efficient. ► Extended fundamental thermodynamic relation to arbitrary nonequilibrium processes

Efficiency and Integration in the Food Supply Chain

Directory of Open Access Journals (Sweden)

Sebastian Jarzebowski

2013-11-01

Full Text Available Due to the nature of the food supply chain, an increase of the integration's degree in the chain may be an important aspect in the context of increasing the efficiency of agri-food companies. Therefore, exploring the relationships among these variables was found as an important research area and adopted as the goal of the paper. The paper is focused mainly on the theoretical background showing the relationship between integration and performance. A description of the theoretical and methodological aspects of performance measurement and its extension (including the integration aspect was also made within the framework of the paper.For an empirical illustration of the analyzed relationships two steps were made. Firstly, the integration's degree in the food chain was measured. Secondly, the efficiency of the companies from the cereals processing industry in Europe was assessed. The SFA models (e.g. Translog and Cobb-Douglas functional form were used for assessment of efficiency. By using stochastic method (e.g. the SFA, Stochastic Frontier Analysis, one may show the influence of external variable (the integration in the supply chain on the efficiency performance of enterprises. Efficiency of economic entities is not an unambiguous term. There are several different concepts of efficiency, its measurement and expressions. Within the framework of efficiency, many terms of similar meaning may be applied. However, these concepts are not identical. The actual concept of efficiency is derived from the structure of the production function, therefore it is conditioned by changes in the productivity of production factors and their remuneration and refers to the allocation of production factors in the most technically efficient way.

Quantum Description of Optical Devices Used in Interferometry

Directory of Open Access Journals (Sweden)

P. Kucera

2007-09-01

Full Text Available A quantum-mechanical description of the phase shifters, retarders, mirrors and beam splitters is given in the paper. The description is then applied on two types of states. On a coherent state, a classical-like state, and on a number state, hence the strict quantum state. The quantum description of a beam splitter can be found in the literature. However the description does not treat with the polarization concept. The paper is aimed to introduce quantum description of an arbitrary oriented retarder and give a description of a beam splitter which treats with the polarization.

Proceedings of the of the Tenth Workshop on Language Descriptions, Tools and Applications (LDTA 2010)

DEFF Research Database (Denmark)

Brabrand, Claus

2010-01-01

-Louis Giavitto ("A Domain Specific Language for Complex Natural & Artificial Systems Simulations") and the 11 contributed papers that were selected for presentation and the proceedings by the programme committee from 30 submissions (i.e., 37% acceptance rate). Every submission was reviewed by at least three......This volume contains the proceedings of the Tenth Workshop on Language Descriptions, Tools and Applications (LDTA 2010), held in Paphos, Cyprus on March 28--29, 2010. LDTA is a two-day satellite event of ETAPS (European Joint Conferences on Theory and Practice of Software) organized in cooperation...... with ACM Sigplan. LDTA is an application and tool-oriented forum on meta programming in a broad sense. A meta program is a program that takes other programs as input or output. The focus of LDTA is on generated or otherwise efficiently implemented meta programs, possibly using high level descriptions...

48 CFR 14.202-5 - Descriptive literature.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Descriptive literature. 14... CONTRACTING METHODS AND CONTRACT TYPES SEALED BIDDING Solicitation of Bids 14.202-5 Descriptive literature. (a) Policy. Contracting officers must not require bidders to furnish descriptive literature unless it is...

48 CFR 514.202-5 - Descriptive literature.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Descriptive literature... CONTRACTING METHODS AND CONTRACT TYPES SEALED BIDDING Solicitation of Bids 514.202-5 Descriptive literature... FAR 52.211-6 satisfies the requirement for descriptive literature. [74 FR 47739, Sept. 17, 2009] ...

Who puts the most energy into energy conservation? A segmentation of energy consumers based on energy-related behavioral characteristics

International Nuclear Information System (INIS)

Sütterlin, Bernadette; Brunner, Thomas A.; Siegrist, Michael

2011-01-01

The present paper aims to identify and describe different types of energy consumers in a more comprehensive way than previous segmentation studies using cluster analysis. Energy consumers were segmented based on their energy-related behavioral characteristics. In addition to purchase- and curtailment-related energy-saving behavior, consumer classification was also based on acceptance of policy measures and energy-related psychosocial factors, so the used behavioral segmentation base was more comprehensive compared to other studies. Furthermore, differentiation between the energy-saving purchase of daily products, such as food, and of energy efficient appliances allowed a more differentiated characterization of the energy consumer segments. The cluster analysis revealed six energy consumer segments: the idealistic, the selfless inconsequent, the thrifty, the materialistic, the convenience-oriented indifferent, and the problem-aware well-being-oriented energy consumer. Findings emphasize that using a broader and more distinct behavioral base is crucial for an adequate and differentiated description of energy consumer types. The paper concludes by highlighting the most promising energy consumer segments and discussing possible segment-specific marketing and policy strategies. - Highlights: ► By applying a cluster-analytic approach, new energy consumer segments are identified. ► A comprehensive, differentiated description of the different energy consumer types is provided. ► A distinction between purchase of daily products and energy efficient appliances is essential. ► Behavioral variables are a more suitable base for segmentation than general characteristics.

The geometry description markup language

International Nuclear Information System (INIS)

Chytracek, R.

2001-01-01

Currently, a lot of effort is being put on designing complex detectors. A number of simulation and reconstruction frameworks and applications have been developed with the aim to make this job easier. A very important role in this activity is played by the geometry description of the detector apparatus layout and its working environment. However, no real common approach to represent geometry data is available and such data can be found in various forms starting from custom semi-structured text files, source code (C/C++/FORTRAN), to XML and database solutions. The XML (Extensible Markup Language) has proven to provide an interesting approach for describing detector geometries, with several different but incompatible XML-based solutions existing. Therefore, interoperability and geometry data exchange among different frameworks is not possible at present. The author introduces a markup language for geometry descriptions. Its aim is to define a common approach for sharing and exchanging of geometry description data. Its requirements and design have been driven by experience and user feedback from existing projects which have their geometry description in XML

DESCRIPTIVE STUDY OF HONORIFIC USE IN KOREAN EMAIL DISCOURSE

Directory of Open Access Journals (Sweden)

Jaegu Kim

2016-07-01

Full Text Available It is a relatively new field that examines how Korean culture affects Korean language use in terms of age difference in a corpus of computer mediated email discourse. The purpose of this descriptive study and experiment is to prove the close relationship between Korean language and culture. This paper shows the descriptive study of Korean culture in relation to language use. Korean culture acknowledges an inherent hierarchy with regard to age, and considers [+age] as relating socially to [+power]. When younger Koreans converse with older ones, they express different morpho-syntactic patterns, which is an age complex. The main task of the experiment was to examine the way through which the age complex is reflected by Korean honorific linguistic system in email discourse. I asked 15 Korean native speakers between the ages of 20 to 25 to write emails expressing an impositive request to [+age (46-50 years old], [-age (below 25 years old] and [=age] recipients. The results show significant differences in the use of grammatical features in emails written to [+age] recipients, as compared to emails written to [-age] and [=age] recipients. The implication of the findings is that the cultural values that are attached to age and aging in the Korean society affects Koreans’ language use, which means Korean language and culture are closely intermingled.

The mathematical description of uniformity and related theorems

International Nuclear Information System (INIS)

Luo Chuanwen; Yi Chundi; Wang Gang; Li Longsuo; Wang Chuncheng

2009-01-01

Uniform index is a conception that can describe the uniformity of a finite point set in a polyhedron, and is closely related to chaos. In order to study uniform index, the concept of contained uniform index is defined, which is similar to uniform index and has good mathematical properties. In this paper, we prove the convergence of the contained uniform index, and develop the base of proving the convergence of uniform index.

Semantic foundation for preferential description logics

CSIR Research Space (South Africa)

Britz, K

2011-12-01

Full Text Available Description logics are a well-established family of knowledge representation formalisms in Artificial Intelligence. Enriching description logics with non-monotonic reasoning capabilities, especially preferential reasoning as developed by Lehmann...

Dual descriptions of supersymmetry breaking

International Nuclear Information System (INIS)

Intrilligator, K.; Thomas, S.

1996-08-01

Dynamical supersymmetry breaking is considered in models which admit descriptions in terms of electric, confined, or magnetic degrees of freedom in various limits. In this way, a variety of seemingly different theories which break supersymmetry are actually interrelated by confinement or duality. Specific examples are given in which there are two dual descriptions of the supersymmetry breaking ground state

The Economic Value of Corporate Eco-Efficiency

International Nuclear Information System (INIS)

Guenster, N.; Derwall, J.; Bauer, R.; Koedijk, K.

2006-08-01

This study adds new insights to the long-running corporate environmental-financial performance debate by focusing on the concept of eco-efficiency. Using a new database of eco-efficiency ratings, we analyze the relation between eco-efficiency and financial performance from 1997 to 2004. We report that eco-efficiency relates positively to operating performance and market value. Moreover, our results suggest that the market's valuation of environmental performance has been time variant, which may indicate that the market incorporates environmental information with a drift. Although environmental leaders initially did not sell at a premium relative to laggards, the valuation differential increased significantly over time. Our results have implications for company managers, who evidently do not have to overcome a tradeoff between eco-efficiency and financial performance, and for investors, who can exploit environmental information for investment decisions

Microscopical description of isovector collective Osup(+) states in atomic nuclei

International Nuclear Information System (INIS)

Chekanov, N.A.

1983-01-01

A microscopical consistent description of isobar-analogue states and isovector monopole giant resonances is given in framework of the random-phase theory. The necessary one-particle basis, including the continuous spectrum, is determined by solution of the Hartree-Fock equations with the effective Skyrme-type interaction. An important feature of such a description is an automatical fulfilment of the consistency conditions relating the shell potential, nuclear density and the residual interaction. Effects due to Coulomb interaction in nuclei are investigated, such as the Coulomb shift energies, isospin admixtures to the ground state of the parent nucleus. Transition densities for the analogue states are obtained. Numerical calculations have been performed in the coordinate space for a number of neutron-rich nuclei

Experimental evaluation of cooling efficiency of the high performance cooling device

Science.gov (United States)

Nemec, Patrik; Malcho, Milan

2016-06-01

This work deal with experimental evaluation of cooling efficiency of cooling device capable transfer high heat fluxes from electric elements to the surrounding. The work contain description of cooling device, working principle of cooling device, construction of cooling device. Experimental part describe the measuring method of device cooling efficiency evaluation. The work results are presented in graphic visualization of temperature dependence of the contact area surface between cooling device evaporator and electronic components on the loaded heat of electronic components in range from 250 to 740 W and temperature dependence of the loop thermosiphon condenser surface on the loaded heat of electronic components in range from 250 to 740 W.

Experimental evaluation of cooling efficiency of the high performance cooling device

Energy Technology Data Exchange (ETDEWEB)

Nemec, Patrik, E-mail: patrik.nemec@fstroj.uniza.sk; Malcho, Milan, E-mail: milan.malcho@fstroj.uniza.sk [University of Žilina, Faculty of Mechanical Engineering, Department of Power Engineering, Univerzitna 1, 010 26 Žilina (Slovakia)

2016-06-30

This work deal with experimental evaluation of cooling efficiency of cooling device capable transfer high heat fluxes from electric elements to the surrounding. The work contain description of cooling device, working principle of cooling device, construction of cooling device. Experimental part describe the measuring method of device cooling efficiency evaluation. The work results are presented in graphic visualization of temperature dependence of the contact area surface between cooling device evaporator and electronic components on the loaded heat of electronic components in range from 250 to 740 W and temperature dependence of the loop thermosiphon condenser surface on the loaded heat of electronic components in range from 250 to 740 W.

Efficient approximations of dispersion relations in optical waveguides with varying refractive-index profiles.

Science.gov (United States)

Li, Yutian; Zhu, Jianxin

2015-05-04

In this paper we consider the problem of computing the eigen-modes for the varying refractive-index profile in an open waveguide. We first approximate the refractive-index by a piecewise polynomial of degree two, and the corresponding Sturm-Liouville problem (eigenvalue problem) of the Helmholtz operator in each layer can be solved analytically by the Kummer functions. Then, analytical approximate dispersion equations are established for both TE and TM cases. Furthermore, the approximate dispersion equations converge fast to the exact ones for the continuous refractive-index function as the maximum value of the subinterval sizes tends to zero. Suitable numerical methods, such as Müller's method or the chord secant method, may be applied to the dispersion relations to compute the eigenmodes. Numerical simulations show that our method is very practical and efficient for computing eigenmodes.

Description, prescription and the choice of discount rates

International Nuclear Information System (INIS)

Baum, Seth D.

2009-01-01

The choice of discount rates is a key issue in the analysis of long-term societal issues, in particular environmental issues such as climate change. Approaches to choosing discount rates are generally placed into two categories: the descriptive approach and the prescriptive approach. The descriptive approach is often justified on grounds that it uses a description of how society discounts instead of having analysts impose their own discounting views on society. This paper analyzes the common forms of the descriptive and prescriptive approaches and finds that, in contrast with customary thinking, both forms are equally descriptive and prescriptive. The prescriptions concern who has standing (i.e. who is included) in society, how the views of these individuals are measured, and how the measurements are aggregated. Such prescriptions are necessary to choose from among the many possible descriptions of how society discounts. The descriptions are the measurements made given a choice of measurement technique. Thus, the labels 'descriptive approach' and 'prescriptive approach' are deeply misleading, as analysts cannot avoid imposing their own views on society. (author)

Converting Taxonomic Descriptions to New Digital Formats

Directory of Open Access Journals (Sweden)

Hong Cui

2008-01-01

Full Text Available Abstract.--The majority of taxonomic descriptions is currently in print format. The majority of digital descriptions are in formats such as DOC, HTML, or PDF and for human readers. These formats do not convey rich semantics in taxonomic descriptions for computer-aided process. Newer digital formats such as XML and RDF accommodate semantic annotations that allow computers to process the rich semantics on human's behalf, thus open up opportunities for a wide range of innovative usages of taxonomic descriptions, such as searching in more precise and flexible ways, integrating with gnomic and geographic information, generating taxonomic keys automatically, and text data mining and information visualization etc. This paper discusses the challenges in automated conversion of multiple collections of descriptions to XML format and reports an automated system, MARTT. MARTT is a machine-learning system that makes use of training examples to tag new descriptions into XML format. A number of utilities are implemented as solutions to the challenges. The utilities are used to reduce the effort for training example preparation, to facilitate the creation of a comprehensive schema, and to predict system performance on a new collection of descriptions. The system has been tested with several plant and alga taxonomic publications including Flora of China and Flora of North America.

Database Description - Yeast Interacting Proteins Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Yeast Interacting Proteins Database Database Description General information of database Database... name Yeast Interacting Proteins Database Alternative name - DOI 10.18908/lsdba.nbdc00742-000 Creator C...-ken 277-8561 Tel: +81-4-7136-3989 FAX: +81-4-7136-3979 E-mail : Database classif...s cerevisiae Taxonomy ID: 4932 Database description Information on interactions and related information obta...l Acad Sci U S A. 2001 Apr 10;98(8):4569-74. Epub 2001 Mar 13. External Links: Original website information Database

Research ethics committee decision-making in relation to an efficient neonatal trial.

Science.gov (United States)

Gale, C; Hyde, M J; Modi, N

2017-07-01

Randomised controlled trials, a gold-standard approach to reduce uncertainties in clinical practice, are growing in cost and are often slow to recruit. We determined whether methodological approaches to facilitate large, efficient clinical trials were acceptable to UK research ethics committees (RECs). We developed a protocol in collaboration with parents, for a comparative-effectiveness, randomised controlled trial comparing two widely used blood transfusion practices in preterm infants. We incorporated four approaches to improve recruitment and efficiency: (i) point-of-care design using electronic patient records for patient identification, randomisation and data acquisition, (ii) short two-page information sheet; (iii) explicit mention of possible inclusion benefit; (iv) opt-out consent with enrolment as the default. With the support of the UK Health Research Authority, we submitted an identical protocol to 12 UK REC. RECs in the UK. Number of REC granting favourable opinions. The use of electronic patient records was acceptable to all RECs; one REC raised concerns about the short parent information sheet, 10 about inclusion benefit and 9 about opt-out consent. Following responses to queries, nine RECs granted a favourable final opinion and three rejected the application because they considered the opt-out consent process invalid. A majority of RECs in this study consider the use of electronic patient record data, short information sheets, opt-out consent and mention of possible inclusion benefit to be acceptable in neonatal comparative-effectiveness research. We identified a need for guidance for RECs in relation to opt-out consent processes. These methods provide opportunity to facilitate large randomised controlled trials. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

CRAC2 model description

International Nuclear Information System (INIS)

Ritchie, L.T.; Alpert, D.J.; Burke, R.P.; Johnson, J.D.; Ostmeyer, R.M.; Aldrich, D.C.; Blond, R.M.

1984-03-01

The CRAC2 computer code is a revised version of CRAC (Calculation of Reactor Accident Consequences) which was developed for the Reactor Safety Study. This document provides an overview of the CRAC2 code and a description of each of the models used. Significant improvements incorporated into CRAC2 include an improved weather sequence sampling technique, a new evacuation model, and new output capabilities. In addition, refinements have been made to the atmospheric transport and deposition model. Details of the modeling differences between CRAC2 and CRAC are emphasized in the model descriptions

Olkiluoto site description 2011

International Nuclear Information System (INIS)

2012-12-01

This fourth version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2008 with the data and knowledge obtained up to December 2010. A descriptive model of the site (the Site Descriptive Model, SDM), i.e. a model describing the geological and hydrogeological structure of the site, properties of the bedrock and the groundwater and its flow, and the associated interacting processes and mechanisms. The SDM is divided into six parts: surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and transport properties

Olkiluoto site description 2011

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-12-15

This fourth version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2008 with the data and knowledge obtained up to December 2010. A descriptive model of the site (the Site Descriptive Model, SDM), i.e. a model describing the geological and hydrogeological structure of the site, properties of the bedrock and the groundwater and its flow, and the associated interacting processes and mechanisms. The SDM is divided into six parts: surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and transport properties.

Choosing a suitable sample size in descriptive sampling

International Nuclear Information System (INIS)

Lee, Yong Kyun; Choi, Dong Hoon; Cha, Kyung Joon

2010-01-01

Descriptive sampling (DS) is an alternative to crude Monte Carlo sampling (CMCS) in finding solutions to structural reliability problems. It is known to be an effective sampling method in approximating the distribution of a random variable because it uses the deterministic selection of sample values and their random permutation,. However, because this method is difficult to apply to complex simulations, the sample size is occasionally determined without thorough consideration. Input sample variability may cause the sample size to change between runs, leading to poor simulation results. This paper proposes a numerical method for choosing a suitable sample size for use in DS. Using this method, one can estimate a more accurate probability of failure in a reliability problem while running a minimal number of simulations. The method is then applied to several examples and compared with CMCS and conventional DS to validate its usefulness and efficiency

Automatic TLI recognition system. Part 1: System description

Energy Technology Data Exchange (ETDEWEB)

Partin, J.K.; Lassahn, G.D.; Davidson, J.R.

1994-05-01

This report describes an automatic target recognition system for fast screening of large amounts of multi-sensor image data, based on low-cost parallel processors. This system uses image data fusion and gives uncertainty estimates. It is relatively low cost, compact, and transportable. The software is easily enhanced to expand the system`s capabilities, and the hardware is easily expandable to increase the system`s speed. This volume gives a general description of the ATR system.

Study of flow profile distortions and efficiency in counter pressure moderated partial filling micellar electrokinetic chromatography in relation to the relative buffer zone lengths.

Science.gov (United States)

Michalke, Daniela; Welsch, Thomas

2002-06-25

The influence of the relative buffer zone lengths on the efficiency was investigated in partial filling micellar electrokinetic chromatography using sodium dodecyl sulfate as separation additive. Varying relative zone lengths were obtained by applying identical initial separation zone lengths but different total lengths of the capillaries. Plate numbers of a homologous series of omega-phenylalcohols were measured to indicate the effect of both a changing relative zone length during the run and a counter pressure applied on the cathodic buffer reservoir. The magnitude and the course of these plate numbers are discussed on the basis of models for flow profile superposition and flow profile deformation which are caused by an intersegmental pressure arising at the boundary between the two buffer zones with different electroosmotic flow velocities. Calculation of the intersegmental pressure and of the resulting laminar flow components in the buffer zones on the basis of some equations for electroosmotic and hydrodynamic flow supported the interpretation that a long background buffer zone should be avoided

Analysis of efficiency and profitability of franchise services

OpenAIRE

GARCÍA MARTIN, CONSTANTINO JOSE; Medal Bartual, Amparo; Peris-Ortiz, Marta

2014-01-01

The present study analyses the relative efficiency of franchise services and characterises the best companies, confirming the relationship between efficiency and profit. These companies are from the trade and other services sector , the main group of service-providing companies in the Spanish economy. The methodology calls for first comparing the relative efficiency of franchisers and ownership enterprises. Second, the focus turns to the most efficient franchise services, usin...

Descriptive analysis of YouTube music therapy videos.

Science.gov (United States)

Gooding, Lori F; Gregory, Dianne

2011-01-01

The purpose of this study was to conduct a descriptive analysis of music therapy-related videos on YouTube. Preliminary searches using the keywords music therapy, music therapy session, and "music therapy session" resulted in listings of 5000, 767, and 59 videos respectively. The narrowed down listing of 59 videos was divided between two investigators and reviewed in order to determine their relationship to actual music therapy practice. A total of 32 videos were determined to be depictions of music therapy sessions. These videos were analyzed using a 16-item investigator-created rubric that examined both video specific information and therapy specific information. Results of the analysis indicated that audio and visual quality was adequate, while narrative descriptions and identification information were ineffective in the majority of the videos. The top 5 videos (based on the highest number of viewings in the sample) were selected for further analysis in order to investigate demonstration of the Professional Level of Practice Competencies set forth in the American Music Therapy Association (AMTA) Professional Competencies (AMTA, 2008). Four of the five videos met basic competency criteria, with the quality of the fifth video precluding evaluation of content. Of particular interest is the fact that none of the videos included credentialing information. Results of this study suggest the need to consider ways to ensure accurate dissemination of music therapy-related information in the YouTube environment, ethical standards when posting music therapy session videos, and the possibility of creating AMTA standards for posting music therapy related video.

Qualitative Descriptive Methods in Health Science Research.

Science.gov (United States)

Colorafi, Karen Jiggins; Evans, Bronwynne

2016-07-01

The purpose of this methodology paper is to describe an approach to qualitative design known as qualitative descriptive that is well suited to junior health sciences researchers because it can be used with a variety of theoretical approaches, sampling techniques, and data collection strategies. It is often difficult for junior qualitative researchers to pull together the tools and resources they need to embark on a high-quality qualitative research study and to manage the volumes of data they collect during qualitative studies. This paper seeks to pull together much needed resources and provide an overview of methods. A step-by-step guide to planning a qualitative descriptive study and analyzing the data is provided, utilizing exemplars from the authors' research. This paper presents steps to conducting a qualitative descriptive study under the following headings: describing the qualitative descriptive approach, designing a qualitative descriptive study, steps to data analysis, and ensuring rigor of findings. The qualitative descriptive approach results in a summary in everyday, factual language that facilitates understanding of a selected phenomenon across disciplines of health science researchers. © The Author(s) 2016.

Construction of the descriptive system for the Assessment of Quality of Life AQoL-6D utility instrument.

Science.gov (United States)

Richardson, Jeffrey R J; Peacock, Stuart J; Hawthorne, Graeme; Iezzi, Angelo; Elsworth, Gerald; Day, Neil A

2012-04-17

Multi attribute utility (MAU) instruments are used to include the health related quality of life (HRQoL) in economic evaluations of health programs. Comparative studies suggest different MAU instruments measure related but different constructs. The objective of this paper is to describe the methods employed to achieve content validity in the descriptive system of the Assessment of Quality of Life (AQoL)-6D, MAU instrument. The AQoL program introduced the use of psychometric methods in the construction of health related MAU instruments. To develop the AQoL-6D we selected 112 items from previous research, focus groups and expert judgment and administered them to 316 members of the public and 302 hospital patients. The search for content validity across a broad spectrum of health states required both formative and reflective modelling. We employed Exploratory Factor Analysis and Structural Equation Modelling (SEM) to meet these dual requirements. The resulting instrument employs 20 items in a multi-tier descriptive system. Latent dimension variables achieve sensitive descriptions of 6 dimensions which, in turn, combine to form a single latent QoL variable. Diagnostic statistics from the SEM analysis are exceptionally good and confirm the hypothesised structure of the model. The AQoL-6D descriptive system has good psychometric properties. They imply that the instrument has achieved construct validity and provides a sensitive description of HRQoL. This means that it may be used with confidence for measuring health related quality of life and that it is a suitable basis for modelling utilities for inclusion in the economic evaluation of health programs.

Description in Literature and Other Media

Directory of Open Access Journals (Sweden)

Thomas Van Parys

2009-10-01

Full Text Available Book Review:
Description in Literature and Other Media
Werner Wolf & Walter Bernhart, eds., Description in Literature and Other Media. Amsterdam/New
York: Rodopi, 2007.
ISBN: 978-90-420-2310-9

The use of qualitative methods in developing the descriptive systems of preference-based measures of health-related quality of life for use in economic evaluation.

Science.gov (United States)

Stevens, Katherine; Palfreyman, Simon

2012-12-01

To describe how qualitative methods can be used in the development of descriptive systems of preference-based measures (PBMs) of health-related quality of life. The requirements of the National Institute for Health and Clinical Excellence and other agencies together with the increasing use of patient-reported outcome measures has led to an increase in the demand for PBMs. Recently, interest has grown in developing new PBMs and while previous research on PBMs has mainly focused on the methods of valuation, research into the methods of developing descriptive systems is an emerging field. Traditionally, descriptive systems of PBMs were developed by using top-down methods, where content was derived from existing measures, the literature, or health surveys. A contrasting approach is a bottom-up methodology, which takes the views of patients or laypeople on how their life is affected by their health. This approach generally requires the use of qualitative methods. Qualitative methods lend themselves well to the development of PBMs. They also ensure that the measure has appropriate language, content validity, and responsiveness to change. While the use of qualitative methods in the development of non-PBMs is fairly standard, their use in developing PBMs was until recently nonexistent. In this article, we illustrate the use of qualitative methods by presenting two case studies of recently developed PBMs, one generic and one condition specific. We outline the stages involved, discuss the strengths and weaknesses of the approach, and compare with the top-down approach used in the majority of PBMs to date. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Agronomic Characteristics Related to Grain Yield and Nutrient Use Efficiency for Wheat Production in China.

Directory of Open Access Journals (Sweden)

Limin Chuan

Full Text Available In order to make clear the recent status and trend of wheat (Triticum aestivum L. production in China, datasets from multiple field experiments and published literature were collected to study the agronomic characteristics related to grain yield, fertilizer application and nutrient use efficiency from the year 2000 to 2011. The results showed that the mean grain yield of wheat in 2000-2011 was 5950 kg/ha, while the N, P2O5 and K2O application rates were 172, 102 and 91 kg/ha on average, respectively. The decrease in N and P2O5 and increase in K2O balanced the nutrient supply and was the main reason for yield increase. The partial factor productivity (PFP, kg grain yield produced per unit of N, P2O5 or K2O applied values of N (PFP-N, P (PFP-P and K (PFP-K were in the ranges of 29.5~39.6, 43.4~74.9 and 44.1~76.5 kg/kg, respectively. While PFP-N showed no significant changes from 2000 to 2010, both PFP-P and PFP-K showed an increased trend over this period. The mean agronomic efficiency (AE, kg grain yield increased per unit of N, P2O5 or K2O applied values of N (AEN, P (AEP and K (AEK were 9.4, 10.2 and 6.5 kg/kg, respectively. The AE values demonstrated marked inter-annual fluctuations, with the amplitude of fluctuation for AEN greater than those for AEP and AEK. The mean fertilizer recovery efficiency (RE, the fraction of nutrient uptake in aboveground plant dry matter to the nutrient of fertilizer application values of N, P and K in the aboveground biomass were 33.1%, 24.3% and 28.4%, respectively. It was also revealed that different wheat ecological regions differ greatly in wheat productivity, fertilizer application and nutrient use efficiency. In summary, it was suggested that best nutrient management practices, i.e. fertilizer recommendation applied based on soil testing or yield response, with strategies to match the nutrient input with realistic yield and demand, or provided with the 4R's nutrient management (right time, right rate, right

An object model for beamline descriptions

International Nuclear Information System (INIS)

Hill, B.W.; Martono, H.; Gillespie, J.S.

1997-01-01

Translation of beamline model descriptions between different accelerator codes presents a unique challenge due to the different representations used for various elements and subsystems. These differences range from simple units conversions to more complex translations involving multiple beamline components. A representation of basic accelerator components is being developed in order to define a meta-structure from which beamline models, in different codes, can be described and to facilitate the translation of models between these codes. Sublines of basic components will be used to represent more complex beamline descriptions and bridge the gap between codes which may represent a beamline element as a single entity, and those which use multiple elements to describe the same physical device. A C++ object model for supporting this beamline description and a grammar for describing beamlines in terms of these components is being developed. The object model will support a common graphic user interface and translation filters for representing native beamline descriptions for a variety of accelerator codes. An overview of our work on the object model for beamline descriptions is presented here. copyright 1997 American Institute of Physics

Flexible Description Language for HPC based Processing of Remote Sense Data

Science.gov (United States)

Nandra, Constantin; Gorgan, Dorian; Bacu, Victor

2016-04-01

When talking about Big Data, the most challenging aspect lays in processing them in order to gain new insight, find new patterns and gain knowledge from them. This problem is likely most apparent in the case of Earth Observation (EO) data. With ever higher numbers of data sources and increasing data acquisition rates, dealing with EO data is indeed a challenge [1]. Geoscientists should address this challenge by using flexible and efficient tools and platforms. To answer this trend, the BigEarth project [2] aims to combine the advantages of high performance computing solutions with flexible processing description methodologies in order to reduce both task execution times and task definition time and effort. As a component of the BigEarth platform, WorDeL (Workflow Description Language) [3] is intended to offer a flexible, compact and modular approach to the task definition process. WorDeL, unlike other description alternatives such as Python or shell scripts, is oriented towards the description topologies, using them as abstractions for the processing programs. This feature is intended to make it an attractive alternative for users lacking in programming experience. By promoting modular designs, WorDeL not only makes the processing descriptions more user-readable and intuitive, but also helps organizing the processing tasks into independent sub-tasks, which can be executed in parallel on multi-processor platforms in order to improve execution times. As a BigEarth platform [4] component, WorDeL represents the means by which the user interacts with the system, describing processing algorithms in terms of existing operators and workflows [5], which are ultimately translated into sets of executable commands. The WorDeL language has been designed to help in the definition of compute-intensive, batch tasks which can be distributed and executed on high-performance, cloud or grid-based architectures in order to improve the processing time. Main references for further

Reactor safety; Description and evaluation of safety activities in Nordic countries

International Nuclear Information System (INIS)

Wahlstroem, B.; Gunsell, L.

1998-03-01

The report gives a description of safety activities in the nuclear power industry. The study has been carried out as a part of the four year programme in Nordic Safety Research (NKS) which was completed in 1997. The objective of the NKS/RAK-1.1 project 'A survey and an evaluation of safety activities in nuclear power' was to make a broad description of various activities important for safety and to make an assessment of their efficiency. A special consideration was placed on a comparison of practices in Finland and Sweden, and between their nuclear utilities. The study has been divided into two parts, one theoretical part in which a model of the relationships between various activities important for safety has been constructed and one practical part where a total of 62 persons have been interviewed at the authorities, the nuclear utilities and one reactor vendor. To restrict the amount of work two activities, safety analysis and experience feedback, were selected. A few cases connected to incidents at nuclear power plants were discussed in more detail. The report has been structured around a simple model of nuclear safety consisting of the concepts of goals, means and outcomes. This model illustrates the importance of goal formulation, systematic planning and feedback of operational experience as major components in nuclear safety. In assessing organisation and management at authorities and the power utilities there is a clear trend of decentralisation and delegation of authority. The general impression from the study is that the safety activities in Finland and Sweden are efficient and well targeted. The experience from the methodology is favourable and the comparison of practices gives a good ground for a discussion of contents and targeting of safety activities. (EG) activities. (EG)

Efficient Delivery of Scalable Video Using a Streaming Class Model

Directory of Open Access Journals (Sweden)

Jason J. Quinlan

2018-03-01

Full Text Available When we couple the rise in video streaming with the growing number of portable devices (smart phones, tablets, laptops, we see an ever-increasing demand for high-definition video online while on the move. Wireless networks are inherently characterised by restricted shared bandwidth and relatively high error loss rates, thus presenting a challenge for the efficient delivery of high quality video. Additionally, mobile devices can support/demand a range of video resolutions and qualities. This demand for mobile streaming highlights the need for adaptive video streaming schemes that can adjust to available bandwidth and heterogeneity, and can provide a graceful changes in video quality, all while respecting viewing satisfaction. In this context, the use of well-known scalable/layered media streaming techniques, commonly known as scalable video coding (SVC, is an attractive solution. SVC encodes a number of video quality levels within a single media stream. This has been shown to be an especially effective and efficient solution, but it fares badly in the presence of datagram losses. While multiple description coding (MDC can reduce the effects of packet loss on scalable video delivery, the increased delivery cost is counterproductive for constrained networks. This situation is accentuated in cases where only the lower quality level is required. In this paper, we assess these issues and propose a new approach called Streaming Classes (SC through which we can define a key set of quality levels, each of which can be delivered in a self-contained manner. This facilitates efficient delivery, yielding reduced transmission byte-cost for devices requiring lower quality, relative to MDC and Adaptive Layer Distribution (ALD (42% and 76% respective reduction for layer 2, while also maintaining high levels of consistent quality. We also illustrate how selective packetisation technique can further reduce the effects of packet loss on viewable quality by

The electrolysis of a carbonate-borate solution with a platinum anode : II. Relation between current efficiency and perborate concentration

NARCIS (Netherlands)

Wiel, van der P.M.; Janssen, L.J.J.; Hoogland, J.G.

1971-01-01

The current efficiency R (cor. for the chem. disproportionation of H2O2 in the bulk of electrolyte) of the electrolytic formation of perborate decreases with increasing concn. of H2O2. The factors causing this decrease were investigated. The relation between R and H2O2% and the diffusion coeff. of

Productive efficiency in the banking industry

Directory of Open Access Journals (Sweden)

Martín Leandro Dutto Giolongo

2016-07-01

Full Text Available The goal of this paper is to estimate the productive efficiency of Argentine banks. For this purpose, panel data of the universe of banks under the supervision of the Central Bank of the Republic of Argentina (BCRA has been collected. In order to build the bank´s indicators, we used a database of 66 institutions, with annual information for the period 2009-2013. The sources of information were both the BCRA´s web site (www.bcra.gov.ar, and the Buenos Aires Stock Exchange´s web site (www.bolsar.com. It has been selected an efficiency indicator ranging between 0 and 1, meaning the lowest and highest level of efficiency, respectively. The concept of efficiency used here is a relative one, because it considers a Bank´s performance in relation to the behavior of the best players in the industry, being the latter the base of the industry benchmark or frontier. The results show that the mean efficiency of Argentine banks is 0,8277 in the specific period under consideration. The comparison with the results of other studies relating efficiency and competitive pressure, didn´t allow us to infer that the Argentine banking industry experienced in the period a high level of competition

DOE-RL Integrated Safety Management System Description

International Nuclear Information System (INIS)

SHOOP, D.S.

2000-01-01

The purpose of this Integrated Safety Management System Description (ISMSD) is to describe the U.S. Department of Energy (DOE), Richland Operations Office (RL) ISMS as implemented through the RL Integrated Management System (RIMS). This ISMSD does not impose additional requirements but rather provides an overview describing how various parts of the ISMS fit together. Specific requirements for each of the core functions and guiding principles are established in other implementing processes, procedures, and program descriptions that comprise RIMS. RL is organized to conduct work through operating contracts; therefore, it is extremely difficult to provide an adequate ISMS description that only addresses RL functions. Of necessity, this ISMSD contains some information on contractor processes and procedures which then require RL approval or oversight. This ISMSD does not purport to contain a full description of the contractors' ISM System Descriptions

DOE-RL Integrated Safety Management System Description

CERN Document Server

Shoop, D S

2000-01-01

The purpose of this Integrated Safety Management System Description (ISMSD) is to describe the U.S. Department of Energy (DOE), Richland Operations Office (RL) ISMS as implemented through the RL Integrated Management System (RIMS). This ISMSD does not impose additional requirements but rather provides an overview describing how various parts of the ISMS fit together. Specific requirements for each of the core functions and guiding principles are established in other implementing processes, procedures, and program descriptions that comprise RIMS. RL is organized to conduct work through operating contracts; therefore, it is extremely difficult to provide an adequate ISMS description that only addresses RL functions. Of necessity, this ISMSD contains some information on contractor processes and procedures which then require RL approval or oversight. This ISMSD does not purport to contain a full description of the contractors' ISM System Descriptions.

Management control system description

Energy Technology Data Exchange (ETDEWEB)

Bence, P. J.

1990-10-01

This Management Control System (MCS) description describes the processes used to manage the cost and schedule of work performed by Westinghouse Hanford Company (Westinghouse Hanford) for the US Department of Energy, Richland Operations Office (DOE-RL), Richland, Washington. Westinghouse Hanford will maintain and use formal cost and schedule management control systems, as presented in this document, in performing work for the DOE-RL. This MCS description is a controlled document and will be modified or updated as required. This document must be approved by the DOE-RL; thereafter, any significant change will require DOE-RL concurrence. Westinghouse Hanford is the DOE-RL operations and engineering contractor at the Hanford Site. Activities associated with this contract (DE-AC06-87RL10930) include operating existing plant facilities, managing defined projects and programs, and planning future enhancements. This document is designed to comply with Section I-13 of the contract by providing a description of Westinghouse Hanford's cost and schedule control systems used in managing the above activities. 5 refs., 22 figs., 1 tab.

Automated generation of partial Markov chain from high level descriptions

International Nuclear Information System (INIS)

Brameret, P.-A.; Rauzy, A.; Roussel, J.-M.

2015-01-01

We propose an algorithm to generate partial Markov chains from high level implicit descriptions, namely AltaRica models. This algorithm relies on two components. First, a variation on Dijkstra's algorithm to compute shortest paths in a graph. Second, the definition of a notion of distance to select which states must be kept and which can be safely discarded. The proposed method solves two problems at once. First, it avoids a manual construction of Markov chains, which is both tedious and error prone. Second, up the price of acceptable approximations, it makes it possible to push back dramatically the exponential blow-up of the size of the resulting chains. We report experimental results that show the efficiency of the proposed approach. - Highlights: • We generate Markov chains from a higher level safety modeling language (AltaRica). • We use a variation on Dijkstra's algorithm to generate partial Markov chains. • Hence we solve two problems: the first problem is the tedious manual construction of Markov chains. • The second problem is the blow-up of the size of the chains, at the cost of decent approximations. • The experimental results highlight the efficiency of the method

Dynamics of relative motion of test particles in general relativity

International Nuclear Information System (INIS)

Bazanski, S.L.

1977-01-01

Several variational principles which lead to the first and the second geodesic deviation equations, recently formulated by the author and used for the description of the relative motion of test particles in general relativity are presented. Relations between these principles are investigated and exhibited. The Hamilton-Jacobi equation is also studied for these generalized deviations and the conservation laws appearing here are discussed

Isotopic tracer studies to evaluate relative efficiency of different forms of P for growing rice on different soil types

Energy Technology Data Exchange (ETDEWEB)

Dash, R N; Mohanty, S K; Patnaik, S [Central Rice Research Inst., Cuttack (India)

1977-12-01

The relative efficiency of different forms of P in relation to their time of application for growing rice on different soil types has been studied by using /sup 32/P tagged mono-, di-, and tri-calcium phosphate, ammonium nitrate phosphate containing all the P in the citrate-soluble form and potassium meta-phosphate. P-deficient acid laterite soil from Burdwan, red loam soil from Peramanpur and calcareous black soil from Hyderabad were used in the study. The different P forms were found to be compatible in the acid, red and laterite soils when the phosphorus forms were primed to moist acid soils 2 weeks prior to flooding. On application at flooding, fertilizers containing citrate-soluble phosphate were found to be less effective as compared to those containing water-soluble phosphate. In the calcareous black soil, however, the fertilizers, containing insoluble or citrate-soluble phosphates were not as efficient as the water-soluble forms, possibly because of lack of dissolution process. Potassium meta-phosphate was found to be effective in all the soil types whether applied at flooding or primed to the moist soil.

USE Efficiency: an innovative educational programme for energy efficiency in buildings

Science.gov (United States)

Papadopoulos, Theofilos A.; Christoforidis, Georgios C.; Papagiannis, Grigoris K.

2017-10-01

Power engineers are expected to play a pivotal role in transforming buildings into smart and energy-efficient structures, which is necessary since buildings are responsible for a considerable amount of the total energy consumption. To fulfil this role, a holistic approach in education is required, tackling subjects traditionally related to other engineering disciplines. In this context, USE Efficiency is an inter-institutional and interdisciplinary educational programme implemented in nine European Universities targeting energy efficiency in buildings. The educational programme effectively links professors, students, engineers and industry experts, creating a unique learning environment. The scope of the paper is to present the methodology and the general framework followed in the USE Efficiency programme. The proposed methodology can be adopted for the design and implementation of educational programmes on energy efficiency and sustainable development in higher education. End-of-course survey results showed positive feedback from the participating students, indicating the success of the programme.

THE EFFICIENCY OF TENNIS DOUBLES SCORING SYSTEMS

Directory of Open Access Journals (Sweden)

Geoff Pollard

2010-09-01

Full Text Available In this paper a family of scoring systems for tennis doubles for testing the hypothesis that pair A is better than pair B versus the alternative hypothesis that pair B is better than A, is established. This family or benchmark of scoring systems can be used as a benchmark against which the efficiency of any doubles scoring system can be assessed. Thus, the formula for the efficiency of any doubles scoring system is derived. As in tennis singles, one scoring system based on the play-the-loser structure is shown to be more efficient than the benchmark systems. An expression for the relative efficiency of two doubles scoring systems is derived. Thus, the relative efficiency of the various scoring systems presently used in doubles can be assessed. The methods of this paper can be extended to a match between two teams of 2, 4, 8, …doubles pairs, so that it is possible to establish a measure for the relative efficiency of the various systems used for tennis contests between teams of players.

Efficiency as a parameter for assessing the Polish healthcare system

Directory of Open Access Journals (Sweden)

Magdalena Bogdan

2018-04-01

Full Text Available Introduction. Efficacy is defined as one of the most valid parameters of health system evaluation. It should be said that there is no consistent definition of the concept of effectiveness in health care, which would allow for the evaluation and comparison of health systems in the world. One can not point to the best or even near ideal of the health system. However, you can rank individual health systems with respect to the evaluation of individual parameters or groups of parameters. One of the possibilities is to evaluate the effectiveness of the system. Aim of the study. The aim of the article is to define and analyze particular types of system effectiveness in the context of the Polish health system. Description of knowledge. The literature on the subject is divided into operational and dynamic efficiency. Dynamic efficiency is divided into adaptive and innovative. The Polish health system is characterized by high operational efficiency. Operational efficiency determines the intensity of the system. The key factor for improving the health of the Polish society, as a factor of socio-economic development of the country is to improve the dynamic efficiency of the system. Conclusions. Health care in Poland has high operational efficiency while low dynamic efficiency, both adaptive and innovative, which clearly demonstrates the existence of a paradox of the overall effectiveness of the health care system in Poland.

The efficiency of driving chemical reactions by a physical non-equilibrium is kinetically controlled.

Science.gov (United States)

Göppel, Tobias; Palyulin, Vladimir V; Gerland, Ulrich

2016-07-27

An out-of-equilibrium physical environment can drive chemical reactions into thermodynamically unfavorable regimes. Under prebiotic conditions such a coupling between physical and chemical non-equilibria may have enabled the spontaneous emergence of primitive evolutionary processes. Here, we study the coupling efficiency within a theoretical model that is inspired by recent laboratory experiments, but focuses on generic effects arising whenever reactant and product molecules have different transport coefficients in a flow-through system. In our model, the physical non-equilibrium is represented by a drift-diffusion process, which is a valid coarse-grained description for the interplay between thermophoresis and convection, as well as for many other molecular transport processes. As a simple chemical reaction, we consider a reversible dimerization process, which is coupled to the transport process by different drift velocities for monomers and dimers. Within this minimal model, the coupling efficiency between the non-equilibrium transport process and the chemical reaction can be analyzed in all parameter regimes. The analysis shows that the efficiency depends strongly on the Damköhler number, a parameter that measures the relative timescales associated with the transport and reaction kinetics. Our model and results will be useful for a better understanding of the conditions for which non-equilibrium environments can provide a significant driving force for chemical reactions in a prebiotic setting.

Production System of Peranakan Etawah Goat under Application of Feed Technology: Productivity and Economic Efficiency

Directory of Open Access Journals (Sweden)

Akhmad Sodiq

2009-09-01

Full Text Available Feed resources are the major constraint in increasing goat production in the village. The main constraints to goat raising are related to feeds (i the high cost of transport of crop residues and grass to the homesteads, (ii the low nutritive value of feeds used, particularly in the dry period. This research was design to evaluate goat productivity and economic efficiency of goat farming under application of feed technology production system in Peranakan Etawah goat farmer group of Gumelar Banyumas Central Java. All farmers were taken as respondents using census methods. On farm research with participative focused group discussion, indepth interview, and farm observation. Descriptive analysis and independent t test methods were used to analyze the data. Results of this study showed that there was a significant improvement goat productivity on production system with the application of feed technology. Body weight at weaning, survival rate till weaning, and doe productivity were increased 7%, 2% and 5%, respectively. There was no evidence of significant different of farmers income and economic efficiency before and after the applied feed technology (P>0.05. The calculation was based on cash flow. Before application, farmers income per year and economic efficiency were Rp14.404.520,00 and 1.21, then insignificantly improve into Rp16.487.100,00 and 1.27, respectively. (Animal Production 11(3: 202-208 (2009 Key Words: Livestock production system, Peranakan Etawah goat, feed technology aplication, productivity and economic efficiency

A comparative study of energy utilization efficiency between Taiwan and China

International Nuclear Information System (INIS)

Yeh Tsailien; Chen Tseryieth; Lai Peiying

2010-01-01

This paper employs data envelopment analysis to evaluate energy utilization efficiency between China and Taiwan from 2002 to 2007. The most important contributions of this paper are the clear description of the systematic process of energy utilization efficiency, the efficiency comparison between China and Taiwan, the remarkable demonstration of their outputs through two non-desirable outputs (CO 2 emissions and SO 2 emissions) in the data envelopment analysis framework, and the valuable results and insights gained from the application of economic development and environmental protection. Empirical results show that the Eastern region of China enjoy higher energy utilization efficiency than the Western region. Energy utilization efficiency in Taiwan is higher than that in the Eastern region of China. In China, CO 2 emissions were 11.28% greater than they should be (from 2002 to 2007). By contrast, CO 2 emissions in Taiwan were only 1.50% in excess of what they should be since Taiwan began conducting an uninterrupted energy-saving policy and a CO 2 emission regulation policy. Finally, this study employs the business strategy matrix constructed by the Boston Consulting Group (BCG Matrix) to illustrate individual evidence of the relationship between economic development efficiency and greenhouse gas efficiency.

An empirical study based on BSC-DEA to measure the relative efficiencies of different health care centers in province of Semnan, Iran

Directory of Open Access Journals (Sweden)

Azam Ghotbuee

2012-10-01

Full Text Available In this paper, we present an empirical investigation to measure the relative efficiency of seven health care centers in province of Semnan, Iran, which were under the coverage of social security organization of Iran. The proposed model of this paper uses a hybrid of balanced score card and data envelopment analysis for performance measurement. The proposed sudy uses four perspectives of balanced score card including learning and growth, internal process, customer and financial perspectives and within each perspective, data envelopment analysis is adopted so that the outputs of each perspective are used as inputs of the other perspective. The preliminary results indicate that all seven units perform relatively well and the overall efficiency of all units in this province is 0.769.

Description-based reappraisal regulate the emotion induced by erotic and neutral images in a Chinese population.

Science.gov (United States)

Peng, Jiaxin; Qu, Chen; Gu, Ruolei; Luo, Yue-Jia

2012-01-01

Previous emotion-regulation research has shown that the late positive potential (LPP) is sensitive to the down-regulation of emotion; however, whether LPP is also sensitive to the up-regulation of emotion remains unclear. The present study examined the description-based reappraisal effects on the up-regulation of positive emotions induced by erotic and neutral images in a Chinese population. Self-reported ratings and event-related potential (ERP) were recorded when subjects viewed pleasant and neutral images, which were shown after either a neutral or positive description. Self-reported results showed that images following positive descriptions were rated as more pleasant compared to images following neutral descriptions. ERP results revealed that the P2, P3, and slow wave (SW) components were larger for erotic pictures than for neutral pictures, while the positive description condition yielded attenuated erotic image-induced P2, P3 and SW and increased SW induced by neutral images. The results demonstrated that description-based reappraisal, as a method of reappraisal, significantly modulates the emotional experience and ERP responses to erotic and neutral images.

Description-based reappraisal regulate the emotion induced by erotic and neutral images in a Chinese population

Directory of Open Access Journals (Sweden)

Jiaxin ePeng

2013-01-01

Full Text Available Previous emotion-regulation research has shown that the late positive potential (LPP is sensitive to the down-regulation of emotion; however, whether LPP is also sensitive to the up-regulation of emotion remains unclear. The present study examined the description-based reappraisal effects on the up-regulation of positive emotions induced by erotic and neutral images in a Chinese population. Self-reported ratings and event-related potential (ERP were recorded when subjects viewed pleasant and neutral images, which were shown after either a neutral or positive description. Self-reported results showed that images following positive descriptions were rated as more pleasant compared to images following neutral descriptions. ERP results revealed that the P2, P3, and slow wave (SW components were larger for erotic pictures than for neutral pictures, while the positive description condition yielded attenuated erotic image-induced P2, P3 and SW and increased SW induced by neutral images. The results demonstrated that description-based reappraisal, as a method of reappraisal, significantly modulates the emotional experience and ERP responses to erotic and neutral images.

M-GCAT: interactively and efficiently constructing large-scale multiple genome comparison frameworks in closely related species

Directory of Open Access Journals (Sweden)

Messeguer Xavier

2006-10-01

Full Text Available Abstract Background Due to recent advances in whole genome shotgun sequencing and assembly technologies, the financial cost of decoding an organism's DNA has been drastically reduced, resulting in a recent explosion of genomic sequencing projects. This increase in related genomic data will allow for in depth studies of evolution in closely related species through multiple whole genome comparisons. Results To facilitate such comparisons, we present an interactive multiple genome comparison and alignment tool, M-GCAT, that can efficiently construct multiple genome comparison frameworks in closely related species. M-GCAT is able to compare and identify highly conserved regions in up to 20 closely related bacterial species in minutes on a standard computer, and as many as 90 (containing 75 cloned genomes from a set of 15 published enterobacterial genomes in an hour. M-GCAT also incorporates a novel comparative genomics data visualization interface allowing the user to globally and locally examine and inspect the conserved regions and gene annotations. Conclusion M-GCAT is an interactive comparative genomics tool well suited for quickly generating multiple genome comparisons frameworks and alignments among closely related species. M-GCAT is freely available for download for academic and non-commercial use at: http://alggen.lsi.upc.es/recerca/align/mgcat/intro-mgcat.html.

An innovative and efficient method to control the shape of push-pull membrane deformable mirror

NARCIS (Netherlands)

Polo, A.; Haber, A.; Pereira, S.F.; Verhaegen, M.H.G.; Urbach, H.P.

2012-01-01

We carry out performance characterisation of a commercial push and pull deformable mirror with 48 actuators (Adaptica Srl). We present a detailed description of the system as well as a statistical approach on the identification of the mirror influence function. A new efficient control algorithm to

Description of the production process - agricultural phase; Descricao do processo produtivo - fase agricola

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-10-15

This chapter presents the description of the state-of-art of the production process of sugar cane bio ethanol in Brazil also denominated of first generation, involving the improvements in the agricultural phase and also the aspects related to the second generation technologies. The different aspects related do the use of sugar cane bagasse and straw cape.

SAVE - energy efficiency in Germany 1990-2000. Report based on the ODYSSEE data base on energy efficiency indicators and the MURE data base on energy efficiency policy measures with the support from SAVE. Final report

Energy Technology Data Exchange (ETDEWEB)

Eichhammer, W.; Schlomann, B.

2002-03-01

This reports presents an analysis of energy efficiency trends in Germany on the basis of energy efficiency indicators extracted from the ODYSSEE data base, maintained and updated in the framework of the SAVE programme. This analysis focuses on the period 1990-2000. The year 1990 could however not be considered for all indicators, because most of the economic and some energy consumption data for Germany are only available since 1991. The analysis also examines the policies and measures implemented in the field of energy efficiency, with a focus on the latest years until February 2002. All these measures are extracted from the MURE data base also updated within the SAVE programme. The report starts with a review on data collection and the recent trends in the general context of energy efficiency, i. e. economic and energy consumption development, energy and environmental policy and energy price trends (Chapter 2). Afterwards, the energy efficiency trends are described both at the level of the whole economy and at sectoral level (Chapter 3). In Chapter 4 the development in one sector - transport - is described more detailed. For the other sectors (industry, residential, tertiary) Annex 2 presents a selection of commented graphs that show the trends for the main indicators. An overview of the most important measures in the field of energy efficiency policy in the end-use sectors in Germany is given in Annex 1. A more detailed description of the most recent measures is presented in Annex 3. (orig.)

Diffraction in ALICE and trigger efficiencies

CERN Document Server

Navin, Sparsh; Lietava, Roman

ALICE is built to measure the properties of strongly interacting matter created in heavy-ion collisions. In addition, taking advantage of the low pT acceptance in the central barrel, ALICE is playing an important role in understanding pp collisions with minimum bias triggers at LHC energies. The work presented in this thesis is based on pp data simulated by the ALICE collaboration and early data collected at a center-of-mass energy of 7 TeV. A procedure to calculate trigger efficiencies and an estimate of the systematic uncertainty due to the limited acceptance of the detector are shown. A kinematic comparison between Monte Carlo event generators, PYTHIA 6, PYTHIA 8 and PHOJET is also presented. To improve the description of diffraction in PYTHIA, a hard diffractive component was added to PYTHIA 8 in 2009, which is described. Finally a trigger with a high efficiency for picking diffractive events is used to select a sample with an enhanced diffractive component from pp data. These data are compared to Monte ...

An Ontology for Description of Drug Discovery Investigations

Directory of Open Access Journals (Sweden)

Qi Da

2010-12-01

Full Text Available The paper presents an ontology for the description of Drug Discovery Investigation (DDI. This has been developed through the use of a Robot Scientist “Eve”, and in consultation with industry. DDI aims to define the principle entities and the relations in the research and development phase of the drug discovery pipeline. DDI is highly transferable and extendable due to its adherence to accepted standards, and compliance with existing ontology resources. This enables DDI to be integrated with such related ontologies as the Vaccine Ontology, the Advancing Clinico-Genomic Trials on Cancer Master Ontology, etc. DDI is available at http://purl.org/ddi/wikipedia or http://purl.org/ddi/home

The effect of the downturn in oil prices on the relative efficiency of government expenditure in the GCC countries

International Nuclear Information System (INIS)

Metwally, M.M.; Perera, N.

1995-01-01

This paper tests a control model to discover the effect of the decline in oil prices on the relative efficiency of government expenditure in the member states of the Gulf Cooperation Council. The econometric analysis shows that as a consequence of the decline in oil prices, the GCC countries need a relatively higher proportional rate of growth in their government expenditure to maintain a given percentage of income growth in the long run. This may, however, prove difficult, which necessitates greater reliance on other means of control. (author)

Efficient boiler operations sourcebook

Energy Technology Data Exchange (ETDEWEB)

Payne, F.W. (comp.)

1985-01-01

This book emphasizes the practical aspects of industrial and commercial boiler operations. It starts with a comprehensive review of general combustion and boiler fundamentals and then deals with specific efficiency improvement methods, and the cost savings which result. The book has the following chapter headings: boiler combustion fundamentals; boiler efficiency goals; major factors controlling boiler efficiency; boiler efficiency calculations; heat loss; graphical solutions; preparation for boiler testing; boiler test procedures; efficiency-related boiler maintenance procedures; boiler tune-up; boiler operational modifications; effect of water side and gas side scale deposits; load management; auxillary equipment to increase boiler efficiency; air preheaters and economizers; other types of auxillary equipment; combustion control systems and instrumentation; boiler O/sub 2/ trim controls; should you purchase a new boiler.; financial evaluation procedures; case studies. The last chapter includes a case study of a boiler burning pulverized coal and a case study of stoker-fired coal.

An efficient and robutst method for shape-based image retrieval

International Nuclear Information System (INIS)

Salih, N.D.; Besar, R.; Abas, F.S.

2007-01-01

Shapes can be thought as being the words oft he visual language. Shape boundaries need to be simplified and estimated in a wide variety of image analysis applications. Representation and description of Shapes is one of the major problems in content-based image retrieval (CBIR). This paper present an a novel method for shape representation and description named block-based shape representation (BSR), which is capable of extracting reliable information of the object outline in a concise manner. Our technique is translation, scale, and rotation invariant. It works well on different types of shapes and fast enough for use in real-time. This technique has been implemented and evaluated in order to analyze its accuracy and Efficiency. Based on the experimental results, we urge that the proposed BSR is a compact and reliable shape representation method. (author)

Doubly special relativity and Finsler geometry

International Nuclear Information System (INIS)

Mignemi, S.

2007-01-01

We discuss the recent proposal of implementing doubly special relativity in configuration space by means of Finsler geometry. Although this formalism leads to a consistent description of the dynamics of a particle, it does not seem to give a complete description of the physics. In particular, the Finsler line element is not invariant under the deformed Lorentz transformations of doubly special relativity. We study in detail some simple applications of the formalism

Post occupancy evaluation of energy-efficient behavior in informal housing of high density area

Science.gov (United States)

Aulia, D. N.; Marpaung, B. O. Y.

2018-02-01

The concept of energy-efficient building emphasizes the critical of efficiency in the use of water, electrical energy, and building materials, beginning with design, construction, to the maintenance of the building in the future. This study was conducted to observe the behavior of Energy Saving of the residents in performing everyday activities in the building. The observed variables are the consumption of natural resources (energy, material, water, and land) and the emissions of air, water, and land related to the environment and health. This research is a descriptive qualitative research with the method of data collection is the distribution of questionnaires and observation. The method of analyzing data is posted occupancy evaluation undertaken to obtain patterns of community-based behavior in urban areas. The informal high-density housing area is a typology of population settlements that found in many big cities in Indonesia. This community represents various community groups regarding occupation, education, income, and race. The results of the study concluded that there are five components of energy-saving behavioral formers in housing namely: residential building components, environmental components in occupancy, external occupancy components, components of social activities and elements of business

The relative efficiency of three methods of estimating herbage mass ...

African Journals Online (AJOL)

The methods involved were randomly placed circular quadrats; randomly placed narrow strips; and disc meter sampling. Disc meter and quadrat sampling appear to be more efficient than strip sampling. In a subsequent small plot grazing trial the estimates of herbage mass, using the disc meter, had a consistent precision ...

Waste Management System Description Document (WMSD)

International Nuclear Information System (INIS)

1992-02-01

This report is an appendix of the ''Waste Management Description Project, Revision 1''. This appendix is about the interim approach for the technical baseline of the waste management system. It describes the documentation and regulations of the waste management system requirements and description. (MB)

The transportation operations system: A description

International Nuclear Information System (INIS)

Best, R.E.; Danese, F.L.; Dixon, L.D.; Peterson, R.W.; Pope, R.B.

1990-01-01

This paper presents a description of the system for transporting radioactive waste that may be deployed to accomplish the assigned system mission, which includes accepting spent nuclear fuel (SNF) and high-level radioactive waste (HLW) from waste generator sites and transporting them to the FWMS destination facilities. The system description presented here contains, in part, irradiated fuel and waste casks, ancillary equipments, truck, rail, and barge transporters, cask and vehicle traffic management organizations, maintenance facilities, and other operations elements. The description is for a fully implemented system, which is not expected to be achieved, however, until several years after initial operations. 6 figs

Logistics, Management and Efficiency

OpenAIRE

Mircea UDRESCU; Sandu CUTURELA

2014-01-01

The problem related to the efficiency of the management for organization is general being the concern off all managers. In the present essay we consider that the efficacy of the organization begins from the structural systemization of the organizational management into general management, management of logistics and management of production which demands a new managerial process, more competitive based on economic efficiency.

Mathematical description of adsorption and transport of reactive solutes in soil: a review of selected literature

International Nuclear Information System (INIS)

Travis, C.C.

1978-10-01

This report reviews selected literature related to the mathematical description of the transport of reactive solutes through soil. The primary areas of the literature reviewed are (1) mathematical models in current use for description of the adsorption-desorption interaction between the soil solution and the soil matrix and (2) analytic solutions of the differential equations describing the convective-dispersive transport of reactive solutes through soil

Construction of the descriptive system for the assessment of quality of life AQoL-6D utility instrument

Directory of Open Access Journals (Sweden)

Richardson Jeffrey RJ

2012-04-01

Full Text Available Abstract Background Multi attribute utility (MAU instruments are used to include the health related quality of life (HRQoL in economic evaluations of health programs. Comparative studies suggest different MAU instruments measure related but different constructs. The objective of this paper is to describe the methods employed to achieve content validity in the descriptive system of the Assessment of Quality of Life (AQoL-6D, MAU instrument. Methods The AQoL program introduced the use of psychometric methods in the construction of health related MAU instruments. To develop the AQoL-6D we selected 112 items from previous research, focus groups and expert judgment and administered them to 316 members of the public and 302 hospital patients. The search for content validity across a broad spectrum of health states required both formative and reflective modelling. We employed Exploratory Factor Analysis and Structural Equation Modelling (SEM to meet these dual requirements. Results and Discussion The resulting instrument employs 20 items in a multi-tier descriptive system. Latent dimension variables achieve sensitive descriptions of 6 dimensions which, in turn, combine to form a single latent QoL variable. Diagnostic statistics from the SEM analysis are exceptionally good and confirm the hypothesised structure of the model. Conclusions The AQoL-6D descriptive system has good psychometric properties. They imply that the instrument has achieved construct validity and provides a sensitive description of HRQoL. This means that it may be used with confidence for measuring health related quality of life and that it is a suitable basis for modelling utilities for inclusion in the economic evaluation of health programs.

Variational description of continuum states in terms of integral relations

International Nuclear Information System (INIS)

Kievsky, A.; Viviani, M.; Barletta, Paolo; Romero-Redondo, C.; Garrido, E.

2010-01-01

Two integral relations derived from the Kohn variational principle (KVP) are used for describing scattering states. In usual applications the KVP requires the explicit form of the asymptotic behavior of the scattering wave function. This is not the case when the integral relations are applied since, due to their short-range nature, the only condition for the scattering wave function Ψ is that it be the solution of (H-E)Ψ=0 in the internal region. Several examples are analyzed for the computation of phase shifts from bound-state-type wave functions or, in the case of the scattering of charged particles, it is possible to obtain phase shifts using free asymptotic conditions. As a final example we discuss the use of the integral relations in the case of the hyperspherical adiabatic method.

Monitored Geologic Repository Project Description Document

International Nuclear Information System (INIS)

Curry, P. M.

2001-01-01

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (YMP 2000a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6)

Monitored Geologic Repository Project Description Document

International Nuclear Information System (INIS)

Curry, P.

2000-01-01

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (CRWMS M and O 2000b) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) engineering design basis in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The engineering design basis documented in the PDD is to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the engineering design basis from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the engineering design basis captured in the SDDs and the design requirements captured in U.S. Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 2-1, the MGR Architecture (Section 4.1),the Engineering Design Bases (Section 5), and the Controlled Project Assumptions (Section 6)

Gender and Relative Economic Efficiency in Sweet Potato Farms of ...

African Journals Online (AJOL)

This study employed the stochastic frontier cost function to measure the level of economic efficiency and its determinants in small-scale sweet potato production in Imo State, Nigeria on gender basis. A multi-stage random sampling technique was used to select 120 sweet potato farmers (64 females and 56 males) in the ...

The relative entropy is fundamental to adaptive resolution simulations

Science.gov (United States)

Kreis, Karsten; Potestio, Raffaello

2016-07-01

Adaptive resolution techniques are powerful methods for the efficient simulation of soft matter systems in which they simultaneously employ atomistic and coarse-grained (CG) force fields. In such simulations, two regions with different resolutions are coupled with each other via a hybrid transition region, and particles change their description on the fly when crossing this boundary. Here we show that the relative entropy, which provides a fundamental basis for many approaches in systematic coarse-graining, is also an effective instrument for the understanding of adaptive resolution simulation methodologies. We demonstrate that the use of coarse-grained potentials which minimize the relative entropy with respect to the atomistic system can help achieve a smoother transition between the different regions within the adaptive setup. Furthermore, we derive a quantitative relation between the width of the hybrid region and the seamlessness of the coupling. Our results do not only shed light on the what and how of adaptive resolution techniques but will also help setting up such simulations in an optimal manner.

Komunikace a public relations v oblasti sportu

OpenAIRE

Blažek, Daniel

2007-01-01

Title of work: Communication and public relations in sport Aim ofwork: Description and analysis of the range of utilization of public relations activities in czech sport environment. Methods: Structured interview with open questions, informal interview, questionnaire with the open questions, participating observation, descriptive analysis. Results: Conclusions and recommendations for the participants of sports happening. lnstruction and rules for the communication and its specifics in sports....

Incentives to improve energy efficiency in EU Grids

Energy Technology Data Exchange (ETDEWEB)

Papaefthymiou, G.; Beestermoeller, C.; Gardiner, A.

2013-04-15

The Energy Efficiency Directive (2012/27/EU) includes provisions related to network tariffs and regulation. It is timely therefore to revisit the potential options for energy efficiency in grids, the treatment of energy efficiency in network tariffs and alternative policies for improving energy efficiency. This project builds on work done previously for the European Copper Institute in this area. In this paper, we concentrate on energy efficiency in electricity network design and operation. Other articles in the Directive relate to the role of the network tariffs and regulations in enabling or incentivising the provision of energy efficiency to end users. In section 2, we describe technical efficiency measures to reduce losses (improve energy efficiency) in the grid. Section 3 reviews grid tariffs in three countries to identify whether they provide incentives or disincentives for energy efficiency in the grid. Section 4 discusses and evaluates alternative regulations for energy efficiency in grids. Section 5 concludes and discusses the main components of the optimal policy framework.

Studying the Efficiency of Industrial Dairy Farms of Saqqez and Divandarreh Cities: Using Super-Efficiency Approach

Directory of Open Access Journals (Sweden)

S.J. Mohammadi

2016-03-01

ranked as an efficient farm. Results and Discussion: The statistical description of the farms studied showed that, the highest and lowest amount of produced milk from one dairy were in the range of 845 and 250 kg per month. The super efficiency estimation showed that the mean of farms'super efficiency based on the assumption of variable return to scale for input-oriented is 1.01. About 58 per cent of the studied dairy cattle farms were inefficient and the Super-efficiency of about 42 per cent of total farms got scores under the average. The amount of λ_k^* for all farms except for farms 3 and 5 has become 0. Furthermore, these two farms in primitive super efficiency model have become infeasible. Therefore, they have been considered as reference farms. The results of super-efficiency method and efficiency conventional DEA method were compared together and inefficient farms got the similar efficiency and super-efficiency scores, and efficient farms whose super-efficiency score had been equaled or more than 1, stand over frontier production function in the conventional model. To determine the sensitivity of results to removing the outliers, three different levels (1

Description and performance of track and primary-vertex reconstruction with the CMS tracker

CERN Document Server

Chatrchyan, Serguei; Sirunyan, Albert M; Tumasyan, Armen; Adam, Wolfgang; Bergauer, Thomas; Dragicevic, Marko; Erö, Janos; Fabjan, Christian; Friedl, Markus; Fruehwirth, Rudolf; Ghete, Vasile Mihai; Hartl, Christian; Hörmann, Natascha; Hrubec, Josef; Jeitler, Manfred; Kiesenhofer, Wolfgang; Knünz, Valentin; Krammer, Manfred; Krätschmer, Ilse; Liko, Dietrich; Mikulec, Ivan; Rabady, Dinyar; Rahbaran, Babak; Rohringer, Herbert; Schöfbeck, Robert; Strauss, Josef; Taurok, Anton; Treberer-Treberspurg, Wolfgang; Waltenberger, Wolfgang; Wulz, Claudia-Elisabeth; Mossolov, Vladimir; Shumeiko, Nikolai; Suarez Gonzalez, Juan; Alderweireldt, Sara; Bansal, Monika; Bansal, Sunil; Beaumont, Willem; Cornelis, Tom; De Wolf, Eddi A; Janssen, Xavier; Knutsson, Albert; Luyckx, Sten; Mucibello, Luca; Ochesanu, Silvia; Roland, Benoit; Rougny, Romain; Van Haevermaet, Hans; Van Mechelen, Pierre; Van Remortel, Nick; Van Spilbeeck, Alex; Blekman, Freya; Blyweert, Stijn; D'Hondt, Jorgen; Devroede, Olivier; Heracleous, Natalie; Kalogeropoulos, Alexis; Keaveney, James; Kim, Tae Jeong; Lowette, Steven; Maes, Michael; Olbrechts, Annik; Python, Quentin; Strom, Derek; Tavernier, Stefaan; Van Doninck, Walter; Van Lancker, Luc; Van Mulders, Petra; Van Onsem, Gerrit Patrick; Villella, Ilaria; Caillol, Cécile; Clerbaux, Barbara; De Lentdecker, Gilles; Favart, Laurent; Gay, Arnaud; Léonard, Alexandre; Marage, Pierre Edouard; Mohammadi, Abdollah; Perniè, Luca; Reis, Thomas; Seva, Tomislav; Thomas, Laurent; Vander Velde, Catherine; Vanlaer, Pascal; Wang, Jian; Adler, Volker; Beernaert, Kelly; Benucci, Leonardo; Cimmino, Anna; Costantini, Silvia; Crucy, Shannon; Dildick, Sven; Garcia, Guillaume; Klein, Benjamin; Lellouch, Jérémie; Mccartin, Joseph; Ocampo Rios, Alberto Andres; Ryckbosch, Dirk; Salva Diblen, Sinem; Sigamani, Michael; Strobbe, Nadja; Thyssen, Filip; Tytgat, Michael; Walsh, Sinead; Yazgan, Efe; Zaganidis, Nicolas; Basegmez, Suzan; Beluffi, Camille; Bruno, Giacomo; Castello, Roberto; Caudron, Adrien; Ceard, Ludivine; Da Silveira, Gustavo Gil; De Callatay, Bernard; Delaere, Christophe; Du Pree, Tristan; Favart, Denis; Forthomme, Laurent; Giammanco, Andrea; Hollar, Jonathan; Jez, Pavel; Komm, Matthias; Lemaitre, Vincent; Liao, Junhui; Michotte, Daniel; Militaru, Otilia; Nuttens, Claude; Pagano, Davide; Pin, Arnaud; Piotrzkowski, Krzysztof; Popov, Andrey; Quertenmont, Loic; Selvaggi, Michele; Vidal Marono, Miguel; Vizan Garcia, Jesus Manuel; Beliy, Nikita; Caebergs, Thierry; Daubie, Evelyne; Hammad, Gregory Habib; Alves, Gilvan; Correa Martins Junior, Marcos; Dos Reis Martins, Thiago; Pol, Maria Elena; Henrique Gomes E Souza, Moacyr; Aldá Júnior, Walter Luiz; Carvalho, Wagner; Chinellato, Jose; Custódio, Analu; Melo Da Costa, Eliza; De Jesus Damiao, Dilson; De Oliveira Martins, Carley; Fonseca De Souza, Sandro; Malbouisson, Helena; Malek, Magdalena; Matos Figueiredo, Diego; Mundim, Luiz; Nogima, Helio; Prado Da Silva, Wanda Lucia; Santaolalla, Javier; Santoro, Alberto; Sznajder, Andre; Tonelli Manganote, Edmilson José; Vilela Pereira, Antonio; Bernardes, Cesar Augusto; De Almeida Dias, Flavia; Tomei, Thiago; De Moraes Gregores, Eduardo; Mercadante, Pedro G; Novaes, Sergio F; Padula, Sandra; Genchev, Vladimir; Iaydjiev, Plamen; Marinov, Andrey; Piperov, Stefan; Rodozov, Mircho; Sultanov, Georgi; Vutova, Mariana; Dimitrov, Anton; Glushkov, Ivan; Hadjiiska, Roumyana; Kozhuharov, Venelin; Litov, Leander; Pavlov, Borislav; Petkov, Peicho; Bian, Jian-Guo; Chen, Guo-Ming; Chen, He-Sheng; Chen, Mingshui; Du, Ran; Jiang, Chun-Hua; Liang, Dong; Liang, Song; Meng, Xiangwei; Plestina, Roko; Tao, Junquan; Wang, Xianyou; Wang, Zheng; Asawatangtrakuldee, Chayanit; Ban, Yong; Guo, Yifei; Li, Qiang; Li, Wenbo; Liu, Shuai; Mao, Yajun; Qian, Si-Jin; Wang, Dayong; Zhang, Linlin; Zou, Wei; Avila, Carlos; Carrillo Montoya, Camilo Andres; Chaparro Sierra, Luisa Fernanda; Florez, Carlos; Gomez, Juan Pablo; Gomez Moreno, Bernardo; Sanabria, Juan Carlos; Godinovic, Nikola; Lelas, Damir; Polic, Dunja; Puljak, Ivica; Antunovic, Zeljko; Kovac, Marko; Brigljevic, Vuko; Kadija, Kreso; Luetic, Jelena; Mekterovic, Darko; Morovic, Srecko; Sudic, Lucija; Attikis, Alexandros; Mavromanolakis, Georgios; Mousa, Jehad; Nicolaou, Charalambos; Ptochos, Fotios; Razis, Panos A; Finger, Miroslav; Finger Jr, Michael; Abdelalim, Ahmed Ali; Assran, Yasser; Elgammal, Sherif; Ellithi Kamel, Ali; Mahmoud, Mohammed; Radi, Amr; Kadastik, Mario; Müntel, Mait; Murumaa, Marion; Raidal, Martti; Rebane, Liis; Tiko, Andres; Eerola, Paula; Fedi, Giacomo; Voutilainen, Mikko; Härkönen, Jaakko; Karimäki, Veikko; Kinnunen, Ritva; Kortelainen, Matti J; Lampén, Tapio; Lassila-Perini, Kati; Lehti, Sami; Lindén, Tomas; Luukka, Panja-Riina; Mäenpää, Teppo; Peltola, Timo; Tuominen, Eija; Tuominiemi, Jorma; Tuovinen, Esa; Wendland, Lauri; Tuuva, Tuure; Besancon, Marc; Couderc, Fabrice; Dejardin, Marc; Denegri, Daniel; Fabbro, Bernard; Faure, Jean-Louis; Ferri, Federico; Ganjour, Serguei; Givernaud, Alain; Gras, Philippe; Hamel de Monchenault, Gautier; Jarry, Patrick; Locci, Elizabeth; Malcles, Julie; Nayak, Aruna; Rander, John; Rosowsky, André; Titov, Maksym; Baffioni, Stephanie; Beaudette, Florian; Busson, Philippe; Charlot, Claude; Daci, Nadir; Dahms, Torsten; Dalchenko, Mykhailo; Dobrzynski, Ludwik; Florent, Alice; Granier de Cassagnac, Raphael; Miné, Philippe; Mironov, Camelia; Naranjo, Ivo Nicolas; Nguyen, Matthew; Ochando, Christophe; Paganini, Pascal; Sabes, David; Salerno, Roberto; Sauvan, Jean-Baptiste; Sirois, Yves; Veelken, Christian; Yilmaz, Yetkin; Zabi, Alexandre; Agram, Jean-Laurent; Andrea, Jeremy; Bloch, Daniel; Bonnin, Christian; Brom, Jean-Marie; Chabert, Eric Christian; Charles, Laurent; Collard, Caroline; Conte, Eric; Drouhin, Frédéric; Fontaine, Jean-Charles; Gelé, Denis; Goerlach, Ulrich; Goetzmann, Christophe; Gross, Laurent; Juillot, Pierre; Le Bihan, Anne-Catherine; Van Hove, Pierre; Gadrat, Sébastien; Baulieu, Guillaume; Beauceron, Stephanie; Beaupere, Nicolas; Boudoul, Gaelle; Brochet, Sébastien; Chasserat, Julien; Chierici, Roberto; Contardo, Didier; Depasse, Pierre; El Mamouni, Houmani; Fan, Jiawei; Fay, Jean; Gascon, Susan; Gouzevitch, Maxime; Ille, Bernard; Kurca, Tibor; Lethuillier, Morgan; Lumb, Nicholas; Mathez, Hervé; Mirabito, Laurent; Perries, Stephane; Ruiz Alvarez, José David; Sgandurra, Louis; Sordini, Viola; Vander Donckt, Muriel; Verdier, Patrice; Viret, Sébastien; Xiao, Hong; Zoccarato, Yannick; Tsamalaidze, Zviad; Autermann, Christian; Beranek, Sarah; Bontenackels, Michael; Calpas, Betty; Edelhoff, Matthias; Esser, Hans; Feld, Lutz; Hindrichs, Otto; Karpinski, Waclaw; Klein, Katja; Kukulies, Christoph; Lipinski, Martin; Ostapchuk, Andrey; Perieanu, Adrian; Pierschel, Gerhard; Preuten, Marius; Raupach, Frank; Sammet, Jan; Schael, Stefan; Schulte, Jan-Frederik; Schwering, Georg; Sprenger, Daniel; Verlage, Tobias; Weber, Hendrik; Wittmer, Bruno; Wlochal, Michael; Zhukov, Valery; Ata, Metin; Caudron, Julien; Dietz-Laursonn, Erik; Duchardt, Deborah; Erdmann, Martin; Fischer, Robert; Güth, Andreas; Hebbeker, Thomas; Heidemann, Carsten; Hoepfner, Kerstin; Klingebiel, Dennis; Knutzen, Simon; Kreuzer, Peter; Merschmeyer, Markus; Meyer, Arnd; Olschewski, Mark; Padeken, Klaas; Papacz, Paul; Reithler, Hans; Schmitz, Stefan Antonius; Sonnenschein, Lars; Teyssier, Daniel; Thüer, Sebastian; Weber, Martin; Cherepanov, Vladimir; Erdogan, Yusuf; Flügge, Günter; Geenen, Heiko; Geisler, Matthias; Haj Ahmad, Wael; Hoehle, Felix; Kargoll, Bastian; Kress, Thomas; Kuessel, Yvonne; Lingemann, Joschka; Nowack, Andreas; Nugent, Ian Michael; Perchalla, Lars; Pistone, Claudia; Pooth, Oliver; Stahl, Achim; Asin, Ivan; Bartosik, Nazar; Behr, Joerg; Behrenhoff, Wolf; Behrens, Ulf; Bell, Alan James; Bergholz, Matthias; Bethani, Agni; Borras, Kerstin; Burgmeier, Armin; Cakir, Altan; Calligaris, Luigi; Campbell, Alan; Choudhury, Somnath; Costanza, Francesco; Diez Pardos, Carmen; Dolinska, Ganna; Dooling, Samantha; Dorland, Tyler; Eckerlin, Guenter; Eckstein, Doris; Eichhorn, Thomas; Flucke, Gero; Geiser, Achim; Grebenyuk, Anastasia; Gunnellini, Paolo; Habib, Shiraz; Hampe, Jan; Hansen, Karsten; Hauk, Johannes; Hellwig, Gregor; Hempel, Maria; Horton, Dean; Jung, Hannes; Kasemann, Matthias; Katsas, Panagiotis; Kieseler, Jan; Kleinwort, Claus; Korol, Ievgen; Krämer, Mira; Krücker, Dirk; Lange, Wolfgang; Leonard, Jessica; Lipka, Katerina; Lohmann, Wolfgang; Lutz, Benjamin; Mankel, Rainer; Marfin, Ihar; Maser, Holger; Melzer-Pellmann, Isabell-Alissandra; Meyer, Andreas Bernhard; Mnich, Joachim; Muhl, Carsten; Mussgiller, Andreas; Naumann-Emme, Sebastian; Novgorodova, Olga; Nowak, Friederike; Ntomari, Eleni; Perrey, Hanno; Petrukhin, Alexey; Pitzl, Daniel; Placakyte, Ringaile; Raspereza, Alexei; Ribeiro Cipriano, Pedro M; Riedl, Caroline; Ron, Elias; Sahin, Mehmet Özgür; Salfeld-Nebgen, Jakob; Saxena, Pooja; Schmidt, Ringo; Schoerner-Sadenius, Thomas; Schröder, Matthias; Spannagel, Simon; Stein, Matthias; Vargas Trevino, Andrea Del Rocio; Walsh, Roberval; Wissing, Christoph; Zuber, Adam; Aldaya Martin, Maria; Berger, Lutz Olaf; Biskop, Heike; Blobel, Volker; Buhmann, Peter; Centis Vignali, Matteo; Enderle, Holger; Erfle, Joachim; Frensche, Benno; Garutti, Erika; Goebel, Kristin; Görner, Martin; Gosselink, Martijn; Haller, Johannes; Hoffmann, Malte; Höing, Rebekka Sophie; Junkes, Alexandra; Kirschenmann, Henning; Klanner, Robert; Kogler, Roman; Lange, Jörn; Lapsien, Tobias; Lenz, Teresa; Maettig, Stefan; Marchesini, Ivan; Matysek, Michael; Ott, Jochen; Peiffer, Thomas; Pietsch, Niklas; Pöhlsen, Thomas; Rathjens, Denis; Sander, Christian; Schettler, Hannes; Schleper, Peter; Schlieckau, Eike; Schmidt, Alexander; Seidel, Markus; Poehlsen, Jennifer; Sola, Valentina; Stadie, Hartmut; Steinbrück, Georg; Troendle, Daniel; Usai, Emanuele; Vanelderen, Lukas; Barth, Christian; Barvich, Tobias; Baus, Colin; Berger, Joram; Boegelspacher, Felix; Böser, Christian; Butz, Erik; Chwalek, Thorsten; Colombo, Fabio; De Boer, Wim; Descroix, Alexis; Dierlamm, Alexander; Eber, Robert; Feindt, Michael; Guthoff, Moritz; Hartmann, Frank; Hauth, Thomas; Heindl, Stefan Michael; Held, Hauke; Hoffmann, Karl-Heinz; Husemann, Ulrich; Katkov, Igor; Kornmayer, Andreas; Kuznetsova, Ekaterina; Lobelle Pardo, Patricia; Martschei, Daniel; Mozer, Matthias Ulrich; Müller, Thomas; Niegel, Martin; Nürnberg, Andreas; Oberst, Oliver; Printz, Martin; Quast, Gunter; Rabbertz, Klaus; Ratnikov, Fedor; Röcker, Steffen; Schilling, Frank-Peter; Schott, Gregory; Simonis, Hans-Jürgen; Steck, Pia; Stober, Fred-Markus Helmut; Ulrich, Ralf; Wagner-Kuhr, Jeannine; Wayand, Stefan; Weiler, Thomas; Wolf, Roger; Zeise, Manuel; Anagnostou, Georgios; Daskalakis, Georgios; Geralis, Theodoros; Kesisoglou, Stilianos; Kyriakis, Aristotelis; Loukas, Demetrios; Markou, Athanasios; Markou, Christos; Psallidas, Andreas; Topsis-Giotis, Iasonas; Gouskos, Loukas; Panagiotou, Apostolos; Saoulidou, Niki; Stiliaris, Efstathios; Aslanoglou, Xenofon; Evangelou, Ioannis; Flouris, Giannis; Foudas, Costas; Jones, John; Kokkas, Panagiotis; Manthos, Nikolaos; Papadopoulos, Ioannis; Paradas, Evangelos; Bencze, Gyorgy; Hajdu, Csaba; Hidas, Pàl; Horvath, Dezso; Sikler, Ferenc; Veszpremi, Viktor; Vesztergombi, Gyorgy; Zsigmond, Anna Julia; Beni, Noemi; Czellar, Sandor; Molnar, Jozsef; Palinkas, Jozsef; Szillasi, Zoltan; Karancsi, János; Raics, Peter; Trocsanyi, Zoltan Laszlo; Ujvari, Balazs; Swain, Sanjay Kumar; Beri, Suman Bala; Bhatnagar, Vipin; Dhingra, Nitish; Gupta, Ruchi; Kaur, Manjit; Mehta, Manuk Zubin; Mittal, Monika; Nishu, Nishu; Sharma, Archana; Singh, Jasbir; Kumar, Ashok; Kumar, Arun; Ahuja, Sudha; Bhardwaj, Ashutosh; Choudhary, Brajesh C; Kumar, Ajay; Malhotra, Shivali; Naimuddin, Md; Ranjan, Kirti; Sharma, Varun; Shivpuri, Ram Krishen; Banerjee, Sunanda; Bhattacharya, Satyaki; Chatterjee, Kalyanmoy; Dutta, Suchandra; Gomber, Bhawna; Jain, Sandhya; Jain, Shilpi; Khurana, Raman; Modak, Atanu; Mukherjee, Swagata; Roy, Debarati; Sarkar, Subir; Sharan, Manoj; Singh, Anil; Abdulsalam, Abdulla; Dutta, Dipanwita; Kailas, Swaminathan; Kumar, Vineet; Mohanty, Ajit Kumar; Pant, Lalit Mohan; Shukla, Prashant; Topkar, Anita; Aziz, Tariq; Banerjee, Sudeshna; Chatterjee, Rajdeep Mohan; Dugad, Shashikant; Ganguly, Sanmay; Ghosh, Saranya; Guchait, Monoranjan; Gurtu, Atul; Kole, Gouranga; Kumar, Sanjeev; Maity, Manas; Majumder, Gobinda; Mazumdar, Kajari; Mohanty, Gagan Bihari; Parida, Bibhuti; Sudhakar, Katta; Wickramage, Nadeesha; Arfaei, Hessamaddin; Bakhshiansohi, Hamed; Behnamian, Hadi; Etesami, Seyed Mohsen; Fahim, Ali; Jafari, Abideh; Khakzad, Mohsen; Mohammadi Najafabadi, Mojtaba; Naseri, Mohsen; Paktinat Mehdiabadi, Saeid; Safarzadeh, Batool; Zeinali, Maryam; Grunewald, Martin; Abbrescia, Marcello; Barbone, Lucia; Calabria, Cesare; Cariola, Pasquale; Chhibra, Simranjit Singh; Colaleo, Anna; Creanza, Donato; De Filippis, Nicola; De Palma, Mauro; De Robertis, Giuseppe; Fiore, Luigi; Franco, Michele; Iaselli, Giuseppe; Loddo, Flavio; Maggi, Giorgio; Maggi, Marcello; Marangelli, Bartolomeo; My, Salvatore; Nuzzo, Salvatore; Pacifico, Nicola; Pompili, Alexis; Pugliese, Gabriella; Radogna, Raffaella; Sala, Giuliano; Selvaggi, Giovanna; Silvestris, Lucia; Singh, Gurpreet; Venditti, Rosamaria; Verwilligen, Piet; Zito, Giuseppe; Abbiendi, Giovanni; Benvenuti, Alberto; Bonacorsi, Daniele; Braibant-Giacomelli, Sylvie; Brigliadori, Luca; Campanini, Renato; Capiluppi, Paolo; Castro, Andrea; Cavallo, Francesca Romana; Codispoti, Giuseppe; Cuffiani, Marco; Dallavalle, Gaetano-Marco; Fabbri, Fabrizio; Fanfani, Alessandra; Fasanella, Daniele; Giacomelli, Paolo; Grandi, Claudio; Guiducci, Luigi; Marcellini, Stefano; Masetti, Gianni; Meneghelli, Marco; Montanari, Alessandro; Navarria, Francesco; Odorici, Fabrizio; Perrotta, Andrea; Primavera, Federica; Rossi, Antonio; Rovelli, Tiziano; Siroli, Gian Piero; Tosi, Nicolò; Travaglini, Riccardo; Albergo, Sebastiano; Cappello, Gigi; Chiorboli, Massimiliano; Costa, Salvatore; Giordano, Ferdinando; Potenza, Renato; Saizu, Mirela Angela; Scinta, Manuel; Tricomi, Alessia; Tuve, Cristina; Barbagli, Giuseppe; Brianzi, Mirko; Ciaranfi, Roberto; Ciulli, Vitaliano; Civinini, Carlo; D'Alessandro, Raffaello; Focardi, Ettore; Gallo, Elisabetta; Gonzi, Sandro; Gori, Valentina; Lenzi, Piergiulio; Meschini, Marco; Paoletti, Simone; Scarlini, Enrico; Sguazzoni, Giacomo; Tropiano, Antonio; Benussi, Luigi; Bianco, Stefano; Fabbri, Franco; Piccolo, Davide; Fabbricatore, Pasquale; Ferretti, Roberta; Ferro, Fabrizio; Lo Vetere, Maurizio; Musenich, Riccardo; Robutti, Enrico; Tosi, Silvano; D'Angelo, Pasqualino; Dinardo, Mauro Emanuele; Fiorendi, Sara; Gennai, Simone; Gerosa, Raffaele; Ghezzi, Alessio; Govoni, Pietro; Lucchini, Marco Toliman; Malvezzi, Sandra; Manzoni, Riccardo Andrea; Martelli, Arabella; Marzocchi, Badder; Menasce, Dario; Moroni, Luigi; Paganoni, Marco; Pedrini, Daniele; Ragazzi, Stefano; Redaelli, Nicola; Tabarelli de Fatis, Tommaso; Buontempo, Salvatore; Cavallo, Nicola; Di Guida, Salvatore; Fabozzi, Francesco; Iorio, Alberto Orso Maria; Lista, Luca; Meola, Sabino; Merola, Mario; Paolucci, Pierluigi; Azzi, Patrizia; Bacchetta, Nicola; Bellato, Marco; Bisello, Dario; Branca, Antonio; Carlin, Roberto; Checchia, Paolo; Dall'Osso, Martino; Dorigo, Tommaso; Galanti, Mario; Gasparini, Fabrizio; Gasparini, Ugo; Giubilato, Piero; Gozzelino, Andrea; Kanishchev, Konstantin; Lacaprara, Stefano; Lazzizzera, Ignazio; Margoni, Martino; Meneguzzo, Anna Teresa; Passaseo, Marina; Pazzini, Jacopo; Pegoraro, Matteo; Pozzobon, Nicola; Ronchese, Paolo; Simonetto, Franco; Torassa, Ezio; Tosi, Mia; Zotto, Pierluigi; Zucchetta, Alberto; Zumerle, Gianni; Gabusi, Michele; Gaioni, Luigi; Manazza, Alessia; Manghisoni, Massimo; Ratti, Lodovico; Ratti, Sergio P; Re, Valerio; Riccardi, Cristina; Salvini, Paola; Traversi, Gianluca; Vitulo, Paolo; Zucca, Stefano; Biasini, Maurizio; Bilei, Gian Mario; Bissi, Lucia; Checcucci, Bruno; Ciangottini, Diego; Conti, Elia; Fanò, Livio; Lariccia, Paolo; Magalotti, Daniel; Mantovani, Giancarlo; Menichelli, Mauro; Passeri, Daniele; Placidi, Pisana; Romeo, Francesco; Saha, Anirban; Salvatore, Michele; Santocchia, Attilio; Servoli, Leonello; Spiezia, Aniello; Androsov, Konstantin; Arezzini, Silvia; Azzurri, Paolo; Bagliesi, Giuseppe; Basti, Andrea; Bernardini, Jacopo; Boccali, Tommaso; Bosi, Filippo; Broccolo, Giuseppe; Calzolari, Federico; Castaldi, Rino; Ciampa, Alberto; Ciocci, Maria Agnese; Dell'Orso, Roberto; Donato, Silvio; Fiori, Francesco; Foà, Lorenzo; Giassi, Alessandro; Grippo, Maria Teresa; Kraan, Aafke; Ligabue, Franco; Lomtadze, Teimuraz; Magazzu, Guido; Martini, Luca; Mazzoni, Enrico; Messineo, Alberto; Moggi, Andrea; Moon, Chang-Seong; Palla, Fabrizio; Raffaelli, Fabrizio; Rizzi, Andrea; Savoy-Navarro, Aurore; Serban, Alin Titus; Spagnolo, Paolo; Squillacioti, Paola; Tenchini, Roberto; Tonelli, Guido; Venturi, Andrea; Verdini, Piero Giorgio; Vernieri, Caterina; Barone, Luciano; Cavallari, Francesca; Del Re, Daniele; Diemoz, Marcella; Grassi, Marco; Jorda, Clara; Longo, Egidio; Margaroli, Fabrizio; Meridiani, Paolo; Micheli, Francesco; Nourbakhsh, Shervin; Organtini, Giovanni; Paramatti, Riccardo; Rahatlou, Shahram; Rovelli, Chiara; Soffi, Livia; Traczyk, Piotr; Amapane, Nicola; Arcidiacono, Roberta; Argiro, Stefano; Arneodo, Michele; Bellan, Riccardo; Biino, Cristina; Cartiglia, Nicolo; Casasso, Stefano; Costa, Marco; Degano, Alessandro; Demaria, Natale; Mariotti, Chiara; Maselli, Silvia; Migliore, Ernesto; Monaco, Vincenzo; Monteil, Ennio; Musich, Marco; Obertino, Maria Margherita; Ortona, Giacomo; Pacher, Luca; Pastrone, Nadia; Pelliccioni, Mario; Potenza, Alberto; Rivetti, Angelo; Romero, Alessandra; Ruspa, Marta; Sacchi, Roberto; Solano, Ada; Staiano, Amedeo; Tamponi, Umberto; Trapani, Pier Paolo; Belforte, Stefano; Candelise, Vieri; Casarsa, Massimo; Cossutti, Fabio; Della Ricca, Giuseppe; Gobbo, Benigno; La Licata, Chiara; Marone, Matteo; Montanino, Damiana; Penzo, Aldo; Schizzi, Andrea; Umer, Tomo; Zanetti, Anna; Chang, Sunghyun; Kim, Tae Yeon; Nam, Soon-Kwon; Kim, Dong Hee; Kim, Gui Nyun; Kim, Ji Eun; Kim, Min Suk; Kong, Dae Jung; Lee, Sangeun; Oh, Young Do; Park, Hyangkyu; Son, Dong-Chul; Kim, Jae Yool; Kim, Zero Jaeho; Song, Sanghyeon; Choi, Suyong; Gyun, Dooyeon; Hong, Byung-Sik; Jo, Mihee; Kim, Hyunchul; Kim, Yongsun; Lee, Kyong Sei; Park, Sung Keun; Roh, Youn; Choi, Minkyoo; Kim, Ji Hyun; Park, Chawon; Park, Inkyu; Park, Sangnam; Ryu, Geonmo; Choi, Young-Il; Choi, Young Kyu; Goh, Junghwan; Kwon, Eunhyang; Lee, Byounghoon; Lee, Jongseok; Seo, Hyunkwan; Yu, Intae; Juodagalvis, Andrius; Komaragiri, Jyothsna Rani; Castilla-Valdez, Heriberto; De La Cruz-Burelo, Eduard; Heredia-de La Cruz, Ivan; Lopez-Fernandez, Ricardo; Martínez-Ortega, Jorge; Sánchez Hernández, Alberto; Villasenor-Cendejas, Luis Manuel; Carrillo Moreno, Salvador; Vazquez Valencia, Fabiola; Salazar Ibarguen, Humberto Antonio; Casimiro Linares, Edgar; Morelos Pineda, Antonio; Krofcheck, David; Butler, Philip H; Doesburg, Robert; Reucroft, Steve; Ahmad, Ashfaq; Ahmad, Muhammad; Asghar, Muhammad Irfan; Butt, Jamila; Hassan, Qamar; Hoorani, Hafeez R; Khan, Wajid Ali; Khurshid, Taimoor; Qazi, Shamona; Shah, Mehar Ali; Shoaib, Muhammad; Bialkowska, Helena; Bluj, Michal; Boimska, Bożena; Frueboes, Tomasz; Górski, Maciej; Kazana, Malgorzata; Nawrocki, Krzysztof; Romanowska-Rybinska, Katarzyna; Szleper, Michal; Wrochna, Grzegorz; Zalewski, Piotr; Brona, Grzegorz; Bunkowski, Karol; Cwiok, Mikolaj; Dominik, Wojciech; Doroba, Krzysztof; Kalinowski, Artur; Konecki, Marcin; Krolikowski, Jan; Misiura, Maciej; Wolszczak, Weronika; Bargassa, Pedrame; Beirão Da Cruz E Silva, Cristóvão; Faccioli, Pietro; Ferreira Parracho, Pedro Guilherme; Gallinaro, Michele; Nguyen, Federico; Rodrigues Antunes, Joao; Seixas, Joao; Varela, Joao; Vischia, Pietro; Bunin, Pavel; Gavrilenko, Mikhail; Golutvin, Igor; Gorbunov, Ilya; Kamenev, Alexey; Karjavin, Vladimir; Konoplyanikov, Viktor; Kozlov, Guennady; Lanev, Alexander; Malakhov, Alexander; Matveev, Viktor; Moisenz, Petr; Palichik, Vladimir; Perelygin, Victor; Shmatov, Sergey; Skatchkov, Nikolai; Smirnov, Vitaly; Zarubin, Anatoli; Golovtsov, Victor; Ivanov, Yury; Kim, Victor; Levchenko, Petr; Murzin, Victor; Oreshkin, Vadim; Smirnov, Igor; Sulimov, Valentin; Uvarov, Lev; Vavilov, Sergey; Vorobyev, Alexey; Vorobyev, Andrey; Andreev, Yuri; Dermenev, Alexander; Gninenko, Sergei; Golubev, Nikolai; Kirsanov, Mikhail; Krasnikov, Nikolai; Pashenkov, Anatoli; Tlisov, Danila; Toropin, Alexander; Epshteyn, Vladimir; Gavrilov, Vladimir; Lychkovskaya, Natalia; Popov, Vladimir; Safronov, Grigory; Semenov, Sergey; Spiridonov, Alexander; Stolin, Viatcheslav; Vlasov, Evgueni; Zhokin, Alexander; Andreev, Vladimir; Azarkin, Maksim; Dremin, Igor; Kirakosyan, Martin; Leonidov, Andrey; Mesyats, Gennady; Rusakov, Sergey V; Vinogradov, Alexey; Belyaev, Andrey; Boos, Edouard; Dubinin, Mikhail; Dudko, Lev; Ershov, Alexander; Gribushin, Andrey; Kaminskiy, Alexandre; Klyukhin, Vyacheslav; Kodolova, Olga; Lokhtin, Igor; Obraztsov, Stepan; Petrushanko, Sergey; Savrin, Viktor; Azhgirey, Igor; Bayshev, Igor; Bitioukov, Sergei; Kachanov, Vassili; Kalinin, Alexey; Konstantinov, Dmitri; Krychkine, Victor; Petrov, Vladimir; Ryutin, Roman; Sobol, Andrei; Tourtchanovitch, Leonid; Troshin, Sergey; Tyurin, Nikolay; Uzunian, Andrey; Volkov, Alexey; Adzic, Petar; Dordevic, Milos; Ekmedzic, Marko; Milosevic, Jovan; Aguilar-Benitez, Manuel; Alcaraz Maestre, Juan; Battilana, Carlo; Calvo, Enrique; Cerrada, Marcos; Chamizo Llatas, Maria; Colino, Nicanor; De La Cruz, Begona; Delgado Peris, Antonio; Domínguez Vázquez, Daniel; Fernandez Bedoya, Cristina; Fernández Ramos, Juan Pablo; Ferrando, Antonio; Flix, Jose; Fouz, Maria Cruz; Garcia-Abia, Pablo; Gonzalez Lopez, Oscar; Goy Lopez, Silvia; Hernandez, Jose M; Josa, Maria Isabel; Merino, Gonzalo; Navarro De Martino, Eduardo; Pérez Calero Yzquierdo, Antonio María; Puerta Pelayo, Jesus; Quintario Olmeda, Adrián; Redondo, Ignacio; Romero, Luciano; Senghi Soares, Mara; Willmott, Carlos; Albajar, Carmen; de Trocóniz, Jorge F; Missiroli, Marino; Brun, Hugues; Cuevas, Javier; Fernandez Menendez, Javier; Folgueras, Santiago; Gonzalez Caballero, Isidro; Lloret Iglesias, Lara; Brochero Cifuentes, Javier Andres; Cabrillo, Iban Jose; Calderon, Alicia; Duarte Campderros, Jordi; Fernandez, Marcos; Gomez, Gervasio; Gonzalez Sanchez, Javier; Graziano, Alberto; Jaramillo Echeverria, Richard William; Lopez Virto, Amparo; Marco, Jesus; Marco, Rafael; Martinez Rivero, Celso; Matorras, Francisco; Moya, David; Munoz Sanchez, Francisca Javiela; Piedra Gomez, Jonatan; Rodrigo, Teresa; Rodríguez-Marrero, Ana Yaiza; Ruiz-Jimeno, Alberto; Scodellaro, Luca; Vila, Ivan; Vilar Cortabitarte, Rocio; Abbaneo, Duccio; Ahmed, Imtiaz; Albert, Eric; Auffray, Etiennette; Auzinger, Georg; Bachtis, Michail; Baillon, Paul; Ball, Austin; Barney, David; Benaglia, Andrea; Bendavid, Joshua; Benhabib, Lamia; Benitez, Jose F; Bernet, Colin; Berruti, Gaia Maria; Bianchi, Giovanni; Blanchot, Georges; Bloch, Philippe; Bocci, Andrea; Bonato, Alessio; Bondu, Olivier; Botta, Cristina; Breuker, Horst; Camporesi, Tiziano; Ceresa, Davide; Cerminara, Gianluca; Christiansen, Jorgen; Christiansen, Tim; Chávez Niemelä, Aleksis Osku; Coarasa Perez, Jose Antonio; Colafranceschi, Stefano; D'Alfonso, Mariarosaria; D'Auria, Andrea; D'Enterria, David; Dabrowski, Anne; Daguin, Jerome; David Tinoco Mendes, Andre; De Guio, Federico; De Roeck, Albert; De Visscher, Simon; Detraz, Stephane; Deyrail, Dominique; Dobson, Marc; Dupont-Sagorin, Niels; Elliott-Peisert, Anna; Eugster, Jürg; Faccio, Federico; Felici, Daniele; Frank, Norbert; Franzoni, Giovanni; Funk, Wolfgang; Giffels, Manuel; Gigi, Dominique; Gill, Karl; Giordano, Domenico; Girone, Maria; Giunta, Marina; Glege, Frank; Gomez-Reino Garrido, Robert; Gowdy, Stephen; Guida, Roberto; Hammer, Josef; Hansen, Magnus; Harris, Philip; Honma, Alan; Innocente, Vincenzo; Janot, Patrick; Kaplon, Jan; Karavakis, Edward; Katopodis, Theodoros; Kottelat, Luc-Joseph; Kousouris, Konstantinos; Kovács, Márk István; Krajczar, Krisztian; Krzempek, Lukasz; Lecoq, Paul; Lourenco, Carlos; Magini, Nicolo; Malgeri, Luca; Mannelli, Marcello; Marchioro, Alessandro; Marconi, Sara; Marques Pinho Noite, João; Masetti, Lorenzo; Meijers, Frans; Mersi, Stefano; Meschi, Emilio; Michelis, Stefano; Moll, Michael; Moortgat, Filip; Mulders, Martijn; Musella, Pasquale; Onnela, Antti; Orsini, Luciano; Pakulski, Tymon; Palencia Cortezon, Enrique; Pavis, Steven; Perez, Emmanuelle; Pernot, Jean-Francois; Perrozzi, Luca; Petagna, Paolo; Petrilli, Achille; Petrucciani, Giovanni; Pfeiffer, Andreas; Pierini, Maurizio; Pimiä, Martti; Piparo, Danilo; Plagge, Michael; Postema, Hans; Racz, Attila; Reece, William; Rolandi, Gigi; Rovere, Marco; Rzonca, Marcin; Sakulin, Hannes; Santanastasio, Francesco; Schäfer, Christoph; Schwick, Christoph; Sekmen, Sezen; Sharma, Archana; Siegrist, Patrice; Silva, Pedro; Simon, Michal; Sphicas, Paraskevas; Spiga, Daniele; Steggemann, Jan; Stieger, Benjamin; Stoye, Markus; Szwarc, Tomasz; Tropea, Paola; Troska, Jan; Tsirou, Andromachi; Vasey, François; Veres, Gabor Istvan; Verlaat, Bart; Vichoudis, Paschalis; Vlimant, Jean-Roch; Wöhri, Hermine Katharina; Zeuner, Wolfram Dietrich; Zwalinski, Lukasz; Bertl, Willi; Deiters, Konrad; Erdmann, Wolfram; Horisberger, Roland; Ingram, Quentin; Kaestli, Hans-Christian; König, Stefan; Kotlinski, Danek; Langenegger, Urs; Meier, Beat; Renker, Dieter; Rohe, Tilman; Streuli, Silvan; Bachmair, Felix; Bäni, Lukas; Becker, Robert; Bianchini, Lorenzo; Bortignon, Pierluigi; Buchmann, Marco-Andrea; Casal, Bruno; Chanon, Nicolas; Da Silva Di Calafiori, Diogo Raphael; Deisher, Amanda; Dissertori, Günther; Dittmar, Michael; Djambazov, Lubomir; Donegà, Mauro; Dünser, Marc; Eller, Philipp; Grab, Christoph; Hits, Dmitry; Horisberger, Urs; Hoss, Jan; Lustermann, Werner; Mangano, Boris; Marini, Andrea Carlo; Martinez Ruiz del Arbol, Pablo; Masciovecchio, Mario; Meister, Daniel; Mohr, Niklas; Nägeli, Christoph; Nef, Pascal; Nessi-Tedaldi, Francesca; Pandolfi, Francesco; Pape, Luc; Pauss, Felicitas; Peruzzi, Marco; Quittnat, Milena; Ronga, Frederic Jean; Röser, Ulf; Rossini, Marco; Starodumov, Andrei; Takahashi, Maiko; Tauscher, Ludwig; Theofilatos, Konstantinos; Treille, Daniel; von Gunten, Hans Peter; Wallny, Rainer; Weber, Hannsjoerg Artur; Amsler, Claude; Bösiger, Kurt; Canelli, Maria Florencia; Chiochia, Vincenzo; De Cosa, Annapaola; Favaro, Carlotta; Hinzmann, Andreas; Hreus, Tomas; Ivova Rikova, Mirena; Kilminster, Benjamin; Lange, Clemens; Maier, Reto; Millan Mejias, Barbara; Ngadiuba, Jennifer; Robmann, Peter; Snoek, Hella; Taroni, Silvia; Verzetti, Mauro; Yang, Yong; Cardaci, Marco; Chen, Kuan-Hsin; Ferro, Cristina; Kuo, Chia-Ming; Li, Syue-Wei; Lin, Willis; Lu, Yun-Ju; Volpe, Roberta; Yu, Shin-Shan; Bartalini, Paolo; Chang, Paoti; Chang, You-Hao; Chang, Yu-Wei; Chao, Yuan; Chen, Kai-Feng; Chen, Po-Hsun; Dietz, Charles; Grundler, Ulysses; Hou, George Wei-Shu; Hsiung, Yee; Kao, Kai-Yi; Lei, Yeong-Jyi; Liu, Yueh-Feng; Lu, Rong-Shyang; Majumder, Devdatta; Petrakou, Eleni; Shi, Xin; Shiu, Jing-Ge; Tzeng, Yeng-Ming; Wang, Minzu; Wilken, Rachel; Asavapibhop, Burin; Suwonjandee, Narumon; Adiguzel, Aytul; Bakirci, Mustafa Numan; Cerci, Salim; Dozen, Candan; Dumanoglu, Isa; Eskut, Eda; Girgis, Semiray; Gokbulut, Gul; Gurpinar, Emine; Hos, Ilknur; Kangal, Evrim Ersin; Kayis Topaksu, Aysel; Onengut, Gulsen; Ozdemir, Kadri; Ozturk, Sertac; Polatoz, Ayse; Sogut, Kenan; Sunar Cerci, Deniz; Tali, Bayram; Topakli, Huseyin; Vergili, Mehmet; Akin, Ilina Vasileva; Aliev, Takhmasib; Bilin, Bugra; Bilmis, Selcuk; Deniz, Muhammed; Gamsizkan, Halil; Guler, Ali Murat; Karapinar, Guler; Ocalan, Kadir; Ozpineci, Altug; Serin, Meltem; Sever, Ramazan; Surat, Ugur Emrah; Yalvac, Metin; Zeyrek, Mehmet; Gülmez, Erhan; Isildak, Bora; Kaya, Mithat; Kaya, Ozlem; Ozkorucuklu, Suat; Bahtiyar, Hüseyin; Barlas, Esra; Cankocak, Kerem; Günaydin, Yusuf Oguzhan; Vardarli, Fuat Ilkehan; Yücel, Mete; Levchuk, Leonid; Sorokin, Pavel; Brooke, James John; Clement, Emyr; Cussans, David; Flacher, Henning; Frazier, Robert; Goldstein, Joel; Grimes, Mark; Heath, Greg P; Heath, Helen F; Jacob, Jeson; Kreczko, Lukasz; Lucas, Chris; Meng, Zhaoxia; Newbold, Dave M; Paramesvaran, Sudarshan; Poll, Anthony; Senkin, Sergey; Smith, Vincent J; Williams, Thomas; Bell, Ken W; Belyaev, Alexander; Brew, Christopher; Brown, Robert M; Cockerill, David JA; Coughlan, John A; Harder, Kristian; Harper, Sam; Ilic, Jelena; Olaiya, Emmanuel; Petyt, David; Shepherd-Themistocleous, Claire; Thea, Alessandro; Tomalin, Ian R; Womersley, William John; Worm, Steven; Baber, Mark; Bainbridge, Robert; Buchmuller, Oliver; Burton, Darren; Colling, David; Cripps, Nicholas; Cutajar, Michael; Dauncey, Paul; Davies, Gavin; Della Negra, Michel; Ferguson, William; Fulcher, Jonathan; Futyan, David; Gilbert, Andrew; Guneratne Bryer, Arlo; Hall, Geoffrey; Hatherell, Zoe; Hays, Jonathan; Iles, Gregory; Jarvis, Martyn; Karapostoli, Georgia; Kenzie, Matthew; Lane, Rebecca; Lucas, Robyn; Lyons, Louis; Magnan, Anne-Marie; Marrouche, Jad; Mathias, Bryn; Nandi, Robin; Nash, Jordan; Nikitenko, Alexander; Pela, Joao; Pesaresi, Mark; Petridis, Konstantinos; Pioppi, Michele; Raymond, David Mark; Rogerson, Samuel; Rose, Andrew; Seez, Christopher; Sharp, Peter; Sparrow, Alex; Tapper, Alexander; Vazquez Acosta, Monica; Virdee, Tejinder; Wakefield, Stuart; Wardle, Nicholas; Cole, Joanne; Hobson, Peter R; Khan, Akram; Kyberd, Paul; Leggat, Duncan; Leslie, Dawn; Martin, William; Reid, Ivan; Symonds, Philip; Teodorescu, Liliana; Turner, Mark; Dittmann, Jay; Hatakeyama, Kenichi; Kasmi, Azeddine; Liu, Hongxuan; Scarborough, Tara; Charaf, Otman; Cooper, Seth; Henderson, Conor; Rumerio, Paolo; Avetisyan, Aram; Bose, Tulika; Fantasia, Cory; Heister, Arno; Lawson, Philip; Lazic, Dragoslav; Richardson, Clint; Rohlf, James; Sperka, David; St John, Jason; Sulak, Lawrence; Alimena, Juliette; Bhattacharya, Saptaparna; Christopher, Grant; Cutts, David; Demiragli, Zeynep; Ferapontov, Alexey; Garabedian, Alex; Heintz, Ulrich; Jabeen, Shabnam; Kukartsev, Gennadiy; Laird, Edward; Landsberg, Greg; Luk, Michael; Narain, Meenakshi; Segala, Michael; Sinthuprasith, Tutanon; Speer, Thomas; Swanson, Joshua; Breedon, Richard; Breto, Guillermo; Calderon De La Barca Sanchez, Manuel; Chauhan, Sushil; Chertok, Maxwell; Conway, John; Conway, Rylan; Cox, Peter Timothy; Erbacher, Robin; Flores, Chad; Gardner, Michael; Ko, Winston; Kopecky, Alexandra; Lander, Richard; Miceli, Tia; Mulhearn, Michael; Pellett, Dave; Pilot, Justin; Ricci-Tam, Francesca; Rutherford, Britney; Searle, Matthew; Shalhout, Shalhout; Smith, John; Squires, Michael; Thomson, John; Tripathi, Mani; Wilbur, Scott; Yohay, Rachel; Andreev, Valeri; Cline, David; Cousins, Robert; Erhan, Samim; Everaerts, Pieter; Farrell, Chris; Felcini, Marta; Hauser, Jay; Ignatenko, Mikhail; Jarvis, Chad; Rakness, Gregory; Schlein, Peter; Takasugi, Eric; Valuev, Vyacheslav; Weber, Matthias; Babb, John; Burt, Kira; Clare, Robert; Ellison, John Anthony; Gary, J William; Hanson, Gail; Heilman, Jesse; Jandir, Pawandeep; Lacroix, Florent; Liu, Hongliang; Long, Owen Rosser; Luthra, Arun; Malberti, Martina; Nguyen, Harold; Olmedo Negrete, Manuel; Shrinivas, Amithabh; Sturdy, Jared; Sumowidagdo, Suharyo; Wimpenny, Stephen; Andrews, Warren; Branson, James G; Cerati, Giuseppe Benedetto; Cittolin, Sergio; D'Agnolo, Raffaele Tito; Evans, David; Holzner, André; Kelley, Ryan; Kovalskyi, Dmytro; Lebourgeois, Matthew; Letts, James; Macneill, Ian; Padhi, Sanjay; Palmer, Christopher; Pieri, Marco; Sani, Matteo; Sharma, Vivek; Simon, Sean; Sudano, Elizabeth; Tadel, Matevz; Tu, Yanjun; Vartak, Adish; Wasserbaech, Steven; Würthwein, Frank; Yagil, Avraham; Yoo, Jaehyeok; Barge, Derek; Bradmiller-Feld, John; Campagnari, Claudio; Danielson, Thomas; Dishaw, Adam; Flowers, Kristen; Franco Sevilla, Manuel; Geffert, Paul; George, Christopher; Golf, Frank; Incandela, Joe; Justus, Christopher; Kyre, Susanne; Magaña Villalba, Ricardo; Mccoll, Nickolas; Mullin, Sam Daniel; Pavlunin, Viktor; Richman, Jeffrey; Rossin, Roberto; Stuart, David; To, Wing; West, Christopher; White, Dean; Apresyan, Artur; Bornheim, Adolf; Bunn, Julian; Chen, Yi; Di Marco, Emanuele; Duarte, Javier; Kcira, Dorian; Mott, Alexander; Newman, Harvey B; Pena, Cristian; Rogan, Christopher; Spiropulu, Maria; Timciuc, Vladlen; Wilkinson, Richard; Xie, Si; Zhu, Ren-Yuan; Azzolini, Virginia; Calamba, Aristotle; Carroll, Ryan; Ferguson, Thomas; Iiyama, Yutaro; Jang, Dong Wook; Paulini, Manfred; Russ, James; Vogel, Helmut; Vorobiev, Igor; Cumalat, John Perry; Drell, Brian Robert; Ford, William T; Gaz, Alessandro; Luiggi Lopez, Eduardo; Nauenberg, Uriel; Smith, James; Stenson, Kevin; Ulmer, Keith; Wagner, Stephen Robert; Alexander, James; Chatterjee, Avishek; Eggert, Nicholas; Gibbons, Lawrence Kent; Hopkins, Walter; Khukhunaishvili, Aleko; Kreis, Benjamin; Mirman, Nathan; Nicolas Kaufman, Gala; Patterson, Juliet Ritchie; Ryd, Anders; Salvati, Emmanuele; Sun, Werner; Teo, Wee Don; Thom, Julia; Thompson, Joshua; Tucker, Jordan; Weng, Yao; Winstrom, Lucas; Wittich, Peter; Winn, Dave; Abdullin, Salavat; Albrow, Michael; Anderson, Jacob; Apollinari, Giorgio; Bauerdick, Lothar AT; Beretvas, Andrew; Berryhill, Jeffrey; Bhat, Pushpalatha C; Burkett, Kevin; Butler, Joel Nathan; Chetluru, Vasundhara; Cheung, Harry; Chlebana, Frank; Chramowicz, John; Cihangir, Selcuk; Cooper, William; Deptuch, Grzegorz; Derylo, Greg; Elvira, Victor Daniel; Fisk, Ian; Freeman, Jim; Gao, Yanyan; Gingu, V Cristinel; Gottschalk, Erik; Gray, Lindsey; Green, Dan; Grünendahl, Stefan; Gutsche, Oliver; Hare, Daryl; Harris, Robert M; Hirschauer, James; Hoff, Jim R; Hooberman, Benjamin; Howell, Joseph; Hrycyk, Michael; Jindariani, Sergo; Johnson, Marvin; Joshi, Umesh; Kaadze, Ketino; Klima, Boaz; Kwan, Simon; Lei, Chi Meng; Linacre, Jacob; Lincoln, Don; Lipton, Ron; Liu, Tiehui; Los, Serguei; Lykken, Joseph; Maeshima, Kaori; Marraffino, John Michael; Martinez Outschoorn, Verena Ingrid; Maruyama, Sho; Mason, David; Matulik, Michael S; McBride, Patricia; Mishra, Kalanand; Mrenna, Stephen; Musienko, Yuri; Nahn, Steve; Newman-Holmes, Catherine; O'Dell, Vivian; Prokofyev, Oleg; Prosser, Alan; Ratnikova, Natalia; Rivera, Ryan; Sexton-Kennedy, Elizabeth; Sharma, Seema; Spalding, William J; Spiegel, Leonard; Taylor, Lucas; Tkaczyk, Slawek; Tran, Nhan Viet; Trimpl, Marcel; Uplegger, Lorenzo; Vaandering, Eric Wayne; Vidal, Richard; Voirin, Erik; Whitbeck, Andrew; Whitmore, Juliana; Wu, Weimin; Yang, Fan; Yun, Jae Chul; Acosta, Darin; Avery, Paul; Bourilkov, Dimitri; Cheng, Tongguang; Das, Souvik; De Gruttola, Michele; Di Giovanni, Gian Piero; Dobur, Didar; Field, Richard D; Fisher, Matthew; Fu, Yu; Furic, Ivan-Kresimir; Hugon, Justin; Kim, Bockjoo; Konigsberg, Jacobo; Korytov, Andrey; Kropivnitskaya, Anna; Kypreos, Theodore; Low, Jia Fu; Matchev, Konstantin; Milenovic, Predrag; Mitselmakher, Guenakh; Muniz, Lana; Rinkevicius, Aurelijus; Shchutska, Lesya; Skhirtladze, Nikoloz; Snowball, Matthew; Yelton, John; Zakaria, Mohammed; Gaultney, Vanessa; Hewamanage, Samantha; Linn, Stephan; Markowitz, Pete; Martinez, German; Rodriguez, Jorge Luis; Adams, Todd; Askew, Andrew; Bochenek, Joseph; Chen, Jie; Diamond, Brendan; Haas, Jeff; Hagopian, Sharon; Hagopian, Vasken; Johnson, Kurtis F; Prosper, Harrison; Veeraraghavan, Venkatesh; Weinberg, Marc; Baarmand, Marc M; Dorney, Brian; Hohlmann, Marcus; Kalakhety, Himali; Yumiceva, Francisco; Adams, Mark Raymond; Apanasevich, Leonard; Bazterra, Victor Eduardo; Betts, Russell Richard; Bucinskaite, Inga; Cavanaugh, Richard; Evdokimov, Olga; Gauthier, Lucie; Gerber, Cecilia Elena; Hofman, David Jonathan; Kapustka, Brian; Khalatyan, Samvel; Kurt, Pelin; Moon, Dong Ho; O'Brien, Christine; Sandoval Gonzalez, Irving Daniel; Silkworth, Christopher; Turner, Paul; Varelas, Nikos; Akgun, Ugur; Albayrak, Elif Asli; Bilki, Burak; Clarida, Warren; Dilsiz, Kamuran; Duru, Firdevs; Haytmyradov, Maksat; Merlo, Jean-Pierre; Mermerkaya, Hamit; Mestvirishvili, Alexi; Moeller, Anthony; Nachtman, Jane; Ogul, Hasan; Onel, Yasar; Ozok, Ferhat; Rahmat, Rahmat; Sen, Sercan; Tan, Ping; Tiras, Emrah; Wetzel, James; Yetkin, Taylan; Yi, Kai; Anderson, Ian; Barnett, Bruce Arnold; Blumenfeld, Barry; Bolognesi, Sara; Fehling, David; Gritsan, Andrei; Maksimovic, Petar; Martin, Christopher; Nash, Kevin; Osherson, Marc; Swartz, Morris; Xiao, Meng; Baringer, Philip; Bean, Alice; Benelli, Gabriele; Gray, Julia; Kenny III, Raymond Patrick; Murray, Michael; Noonan, Daniel; Sanders, Stephen; Sekaric, Jadranka; Stringer, Robert; Tinti, Gemma; Wang, Quan; Wood, Jeffrey Scott; Barfuss, Anne-Fleur; Chakaberia, Irakli; Ivanov, Andrew; Khalil, Sadia; Makouski, Mikhail; Maravin, Yurii; Saini, Lovedeep Kaur; Shrestha, Shruti; Svintradze, Irakli; Taylor, Russell; Toda, Sachiko; Gronberg, Jeffrey; Lange, David; Rebassoo, Finn; Wright, Douglas; Baden, Drew; Calvert, Brian; Eno, Sarah Catherine; Gomez, Jaime; Hadley, Nicholas John; Kellogg, Richard G; Kolberg, Ted; Lu, Ying; Marionneau, Matthieu; Mignerey, Alice; Pedro, Kevin; Skuja, Andris; Temple, Jeffrey; Tonjes, Marguerite; Tonwar, Suresh C; Apyan, Aram; Barbieri, Richard; Bauer, Gerry; Busza, Wit; Cali, Ivan Amos; Chan, Matthew; Di Matteo, Leonardo; Dutta, Valentina; Gomez Ceballos, Guillelmo; Goncharov, Maxim; Gulhan, Doga; Klute, Markus; Lai, Yue Shi; Lee, Yen-Jie; Levin, Andrew; Luckey, Paul David; Ma, Teng; Paus, Christoph; Ralph, Duncan; Roland, Christof; Roland, Gunther; Stephans, George; Stöckli, Fabian; Sumorok, Konstanty; Velicanu, Dragos; Veverka, Jan; Wyslouch, Bolek; Yang, Mingming; Yoon, Sungho; Zanetti, Marco; Zhukova, Victoria; Dahmes, Bryan; De Benedetti, Abraham; Gude, Alexander; Kao, Shih-Chuan; Klapoetke, Kevin; Kubota, Yuichi; Mans, Jeremy; Pastika, Nathaniel; Rusack, Roger; Singovsky, Alexander; Tambe, Norbert; Turkewitz, Jared; Acosta, John Gabriel; Cremaldi, Lucien Marcus; Kroeger, Rob; Oliveros, Sandra; Perera, Lalith; Sanders, David A; Summers, Don; Avdeeva, Ekaterina; Bloom, Kenneth; Bose, Suvadeep; Claes, Daniel R; Dominguez, Aaron; Fangmeier, Caleb; Gonzalez Suarez, Rebeca; Keller, Jason; Knowlton, Dan; Kravchenko, Ilya; Lazo-Flores, Jose; Malik, Sudhir; Meier, Frank; Monroy, Jose; Snow, Gregory R; Dolen, James; George, Jimin; Godshalk, Andrew; Iashvili, Ia; Jain, Supriya; Kaisen, Josh; Kharchilava, Avto; Kumar, Ashish; Rappoccio, Salvatore; Alverson, George; Barberis, Emanuela; Baumgartel, Darin; Chasco, Matthew; Haley, Joseph; Massironi, Andrea; Nash, David; Orimoto, Toyoko; Trocino, Daniele; Wood, Darien; Zhang, Jinzhong; Anastassov, Anton; Hahn, Kristan Allan; Kubik, Andrew; Lusito, Letizia; Mucia, Nicholas; Odell, Nathaniel; Pollack, Brian; Pozdnyakov, Andrey; Schmitt, Michael Henry; Sevova, Stanislava; Stoynev, Stoyan; Sung, Kevin; Trovato, Marco; Velasco, Mayda; Won, Steven; Berry, Douglas; Brinkerhoff, Andrew; Chan, Kwok Ming; Drozdetskiy, Alexey; Hildreth, Michael; Jessop, Colin; Karmgard, Daniel John; Kellams, Nathan; Kolb, Jeff; Lannon, Kevin; Luo, Wuming; Lynch, Sean; Marinelli, Nancy; Morse, David Michael; Pearson, Tessa; Planer, Michael; Ruchti, Randy; Slaunwhite, Jason; Valls, Nil; Wayne, Mitchell; Wolf, Matthias; Woodard, Anna; Antonelli, Louis; Bylsma, Ben; Durkin, Lloyd Stanley; Flowers, Sean; Hill, Christopher; Hughes, Richard; Kotov, Khristian; Ling, Ta-Yung; Puigh, Darren; Rodenburg, Marissa; Smith, Geoffrey; Vuosalo, Carl; Winer, Brian L; Wolfe, Homer; Wulsin, Howard Wells; Berry, Edmund; Elmer, Peter; Halyo, Valerie; Hebda, Philip; Hegeman, Jeroen; Hunt, Adam; Jindal, Pratima; Koay, Sue Ann; Lujan, Paul; Marlow, Daniel; Medvedeva, Tatiana; Mooney, Michael; Olsen, James; Piroué, Pierre; Quan, Xiaohang; Raval, Amita; Saka, Halil; Stickland, David; Tully, Christopher; Werner, Jeremy Scott; Zenz, Seth Conrad; Zuranski, Andrzej; Brownson, Eric; Lopez, Angel; Mendez, Hector; Ramirez Vargas, Juan Eduardo; Alagoz, Enver; Arndt, Kirk; Benedetti, Daniele; Bolla, Gino; Bortoletto, Daniela; Bubna, Mayur; Cervantes, Mayra; De Mattia, Marco; Everett, Adam; Hu, Zhen; Jha, Manoj; Jones, Matthew; Jung, Kurt; Kress, Matthew; Leonardo, Nuno; Lopes Pegna, David; Maroussov, Vassili; Merkel, Petra; Miller, David Harry; Neumeister, Norbert; Radburn-Smith, Benjamin Charles; Shipsey, Ian; Silvers, David; Svyatkovskiy, Alexey; Wang, Fuqiang; Xie, Wei; Xu, Lingshan; Yoo, Hwi Dong; Zablocki, Jakub; Zheng, Yu; Parashar, Neeti; Stupak, John; Adair, Antony; Akgun, Bora; Ecklund, Karl Matthew; Geurts, Frank JM; Li, Wei; Michlin, Benjamin; Padley, Brian Paul; Redjimi, Radia; Roberts, Jay; Zabel, James; Betchart, Burton; Bodek, Arie; Covarelli, Roberto; de Barbaro, Pawel; Demina, Regina; Eshaq, Yossof; Ferbel, Thomas; Garcia-Bellido, Aran; Goldenzweig, Pablo; Han, Jiyeon; Harel, Amnon; Miner, Daniel Carl; Petrillo, Gianluca; Vishnevskiy, Dmitry; Zielinski, Marek; Bhatti, Anwar; Ciesielski, Robert; Demortier, Luc; Goulianos, Konstantin; Lungu, Gheorghe; Malik, Sarah; Mesropian, Christina; Arora, Sanjay; Barker, Anthony; Bartz, Ed; Chou, John Paul; Contreras-Campana, Christian; Contreras-Campana, Emmanuel; Duggan, Daniel; Ferencek, Dinko; Gershtein, Yuri; Gray, Richard; Halkiadakis, Eva; Hidas, Dean; Lath, Amitabh; Panwalkar, Shruti; Park, Michael; Patel, Rishi; Rekovic, Vladimir; Robles, Jorge; Salur, Sevil; Schnetzer, Steve; Seitz, Claudia; Somalwar, Sunil; Stone, Robert; Thomas, Scott; Thomassen, Peter; Walker, Matthew; Rose, Keith; Spanier, Stefan; Yang, Zong-Chang; York, Andrew; Bouhali, Othmane; Eusebi, Ricardo; Flanagan, Will; Gilmore, Jason; Kamon, Teruki; Khotilovich, Vadim; Krutelyov, Vyacheslav; Montalvo, Roy; Osipenkov, Ilya; Pakhotin, Yuriy; Perloff, Alexx; Roe, Jeffrey; Safonov, Alexei; Sakuma, Tai; Suarez, Indara; Tatarinov, Aysen; Toback, David; Akchurin, Nural; Cowden, Christopher; Damgov, Jordan; Dragoiu, Cosmin; Dudero, Phillip Russell; Faulkner, James; Kovitanggoon, Kittikul; Kunori, Shuichi; Lee, Sung Won; Libeiro, Terence; Volobouev, Igor; Appelt, Eric; Delannoy, Andrés G; Greene, Senta; Gurrola, Alfredo; Johns, Willard; Maguire, Charles; Mao, Yaxian; Melo, Andrew; Sharma, Monika; Sheldon, Paul; Snook, Benjamin; Tuo, Shengquan; Velkovska, Julia; Arenton, Michael Wayne; Boutle, Sarah; Cox, Bradley; Francis, Brian; Goodell, Joseph; Hirosky, Robert; Ledovskoy, Alexander; Lin, Chuanzhe; Neu, Christopher; Wood, John; Gollapinni, Sowjanya; Harr, Robert; Karchin, Paul Edmund; Kottachchi Kankanamge Don, Chamath; Lamichhane, Pramod; Belknap, Donald; Borrello, Laura; Carlsmith, Duncan; Cepeda, Maria; Dasu, Sridhara; Duric, Senka; Friis, Evan; Grothe, Monika; Hall-Wilton, Richard; Herndon, Matthew; Hervé, Alain; Klabbers, Pamela; Klukas, Jeffrey; Lanaro, Armando; Levine, Aaron; Loveless, Richard; Mohapatra, Ajit; Ojalvo, Isabel; Palmonari, Francesco; Perry, Thomas; Pierro, Giuseppe Antonio; Polese, Giovanni; Ross, Ian; Sakharov, Alexandre; Sarangi, Tapas; Savin, Alexander; Smith, Wesley H; Woods, Nathaniel

2014-10-16

A description is provided of the software algorithms developed for the CMS tracker both for reconstructing charged-particle trajectories in proton-proton interactions and for using the resulting tracks to estimate the positions of the LHC luminous region and individual primary-interaction vertices. Despite the very hostile environment at the LHC, the performance obtained with these algorithms is found to be excellent. For $t\\bar{t}$ events under typical 2011 pileup conditions, the average track-reconstruction efficiency for promptly-produced charged particles with transverse momenta of $p_T$ > 0.9 GeV is 94% for pseudorapidities of |$\\eta$| < 0.9 and 85% for |$\\eta$| between 0.9 and 2.5. The inefficiency is caused mainly by hadrons that undergo nuclear interactions in the tracker material. For isolated muons, the corresponding efficiencies are essentially 100%. For isolated muons of $p_T$ = 100 GeV emitted at |$\\eta$| lower than 1.4, the resolutions are approximately 2.8% in $p_T$, and respectively, 10 mi...

A cause and effect two-stage BSC-DEA method for measuring the relative efficiency of organizations

Directory of Open Access Journals (Sweden)

Seyed Esmaeel Najafi

2011-01-01

Full Text Available This paper presents an integration of balanced score card (BSE with two-stage data envelopment analysis (DEA. The proposed model of this paper uses different financial and non-financial perspectives to evaluate the performance of decision making units in different BSC stages. At each stage, a two-stage DEA method is implemented to measure the relative efficiency of decision making units and the results are monitored using the cause and effect relationships. An empirical study for a banking sector is also performed using the method developed in this paper and the results are briefly analyzed.

A standard curve based method for relative real time PCR data processing

Directory of Open Access Journals (Sweden)

Krause Andreas

2005-03-01

Full Text Available Abstract Background Currently real time PCR is the most precise method by which to measure gene expression. The method generates a large amount of raw numerical data and processing may notably influence final results. The data processing is based either on standard curves or on PCR efficiency assessment. At the moment, the PCR efficiency approach is preferred in relative PCR whilst the standard curve is often used for absolute PCR. However, there are no barriers to employ standard curves for relative PCR. This article provides an implementation of the standard curve method and discusses its advantages and limitations in relative real time PCR. Results We designed a procedure for data processing in relative real time PCR. The procedure completely avoids PCR efficiency assessment, minimizes operator involvement and provides a statistical assessment of intra-assay variation. The procedure includes the following steps. (I Noise is filtered from raw fluorescence readings by smoothing, baseline subtraction and amplitude normalization. (II The optimal threshold is selected automatically from regression parameters of the standard curve. (III Crossing points (CPs are derived directly from coordinates of points where the threshold line crosses fluorescence plots obtained after the noise filtering. (IV The means and their variances are calculated for CPs in PCR replicas. (V The final results are derived from the CPs' means. The CPs' variances are traced to results by the law of error propagation. A detailed description and analysis of this data processing is provided. The limitations associated with the use of parametric statistical methods and amplitude normalization are specifically analyzed and found fit to the routine laboratory practice. Different options are discussed for aggregation of data obtained from multiple reference genes. Conclusion A standard curve based procedure for PCR data processing has been compiled and validated. It illustrates that

[Catheter-related bladder discomfort after urological surgery: importance of the type of surgery and efficiency of treatment by clonazepam].

Science.gov (United States)

Maro, S; Zarattin, D; Baron, T; Bourez, S; de la Taille, A; Salomon, L

2014-09-01

Bladder catheter can induce a Catheter-Related Bladder Discomfort (CRBD). Antagonist of muscarinic receptor is the gold standard treatment. Clonazepam is an antimuscarinic, muscle relaxing oral drug. The aim of this study is to look for a correlation between the type of surgical procedure and the existence of CRBD and to evaluate the efficiency of clonazepam. One hundred patients needing bladder catheter were evaluated. Sexe, age, BMI, presence of diabetes, surgical procedure and existence of CRBD were noted. Pain was evaluated with analogic visual scale. Timing of pain, need for specific treatment by clonazepam and its efficiency were noted. Correlation between preoperative data, type of surgical procedure, existence of CRBD and efficiency of treatment were evaluated. There were 79 men and 21 women (age: 65.9 years, BMI: 25.4). Twelve patients presented diabetes. Surgical procedure concerned prostate in 39 cases, bladder in 19 cases (tumor resections), endo-urology in 20 cases, upper urinary tract in 12 cases (nephrectomy…) and lower urinary tract in 10 cases (sphincter, sub-uretral tape). Forty patients presented CRBD, (pain 4.5 using VAS). This pain occurred 0.6 days after surgery. No correlation was found between preoperative data and CRBD. Bladder resection and endo-urological procedures were surgical procedures which procured CRBD. Clonazepam was efficient in 30 (75 %) out of 40 patients with CRBD. However, it was less efficient in case of bladder tumor resection. CRBD is frequent and occurred immediately after surgery. Bladder resection and endo-urology were the main surgical procedures which induced CRBD. Clonazepam is efficient in 75 %. Bladder resection is the surgical procedure which is the most refractory to treatment. 5. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Design and implementation of an XML based object-oriented detector description database for CMS

International Nuclear Information System (INIS)

Liendl, M.

2003-04-01

This thesis deals with the development of a detector description database (DDD) for the compact muon solenoid (CMS) experiment at the large hadron collider (LHC) located at the European organization for nuclear research (CERN). DDD is a fundamental part of the CMS offline software with its main applications, simulation and reconstruction. Both are in need of different models of the detector in order to efficiently solve their specific tasks. In the thesis the requirements to a detector description database are analyzed and the chosen solution is described in detail. It comprises the following components: an XML based detector description language, a runtime system that implements an object-oriented transient representation of the detector, and an application programming interface to be used by client applications. One of the main aspects of the development is the design of the DDD components. The starting point is a domain model capturing concisely the characteristics of the problem domain. The domain model is transformed into several implementation models according to the guidelines of the model driven architecture (MDA). Implementation models and appropriate refinements thereof are foundation for adequate implementations. Using the MDA approach, a fully functional prototype was realized in C++ and XML. The prototype was successfully tested through seamless integration into both the simulation and the reconstruction framework of CMS. (author)

Performance efficiency of feed utilization, relative growth rate, and survival rate of common carp (Cyprinus carpio) through the addition of phytase in the feed

Science.gov (United States)

Rachmawati, D.; Samidjan, I.

2018-04-01

The purpose of this study was to determine the effect of adding phytase enzyme in the feed on digestibility of feed, efficiency of feed utilization, relative growth rate and survival rate of Common carp (Cyprinus carpio). Fish samples in this research were Common carp with an average - weight of 3.34 ± 0,16 g/fish. The treatments were adding the phytase enzyme in the feed with the different level of doses. Those were A (0 U kg-1 feed), B (500 U kg-1 feed), C (1.000 U kg-1 feed g) and D (1.500 U kg-1 feed). Observation was conducted on digestibility of protein (ADCP), digestibility of phosphor (ADCF), efficiency of feed utilization (EFU), relative growth rate (RGR), protein efficiency ratio (PER), feed conversion ratio (FCR), survival rate (SR) and water quality parameters. The results show that the addition of phytase enzyme significantly (P0.05) affected on SR of common carp. Based on results, it was concluded that optimum doses of phytase enzyme feed in terms of digestibility of feed, efficiency utilization of Feed and growth rate of Common carp ranges from 943 to 1100 U kg-1 feed

Flexible Description and Adaptive Processing of Earth Observation Data through the BigEarth Platform

Science.gov (United States)

Gorgan, Dorian; Bacu, Victor; Stefanut, Teodor; Nandra, Cosmin; Mihon, Danut

2016-04-01

The Earth Observation data repositories extending periodically by several terabytes become a critical issue for organizations. The management of the storage capacity of such big datasets, accessing policy, data protection, searching, and complex processing require high costs that impose efficient solutions to balance the cost and value of data. Data can create value only when it is used, and the data protection has to be oriented toward allowing innovation that sometimes depends on creative people, which achieve unexpected valuable results through a flexible and adaptive manner. The users need to describe and experiment themselves different complex algorithms through analytics in order to valorize data. The analytics uses descriptive and predictive models to gain valuable knowledge and information from data analysis. Possible solutions for advanced processing of big Earth Observation data are given by the HPC platforms such as cloud. With platforms becoming more complex and heterogeneous, the developing of applications is even harder and the efficient mapping of these applications to a suitable and optimum platform, working on huge distributed data repositories, is challenging and complex as well, even by using specialized software services. From the user point of view, an optimum environment gives acceptable execution times, offers a high level of usability by hiding the complexity of computing infrastructure, and supports an open accessibility and control to application entities and functionality. The BigEarth platform [1] supports the entire flow of flexible description of processing by basic operators and adaptive execution over cloud infrastructure [2]. The basic modules of the pipeline such as the KEOPS [3] set of basic operators, the WorDeL language [4], the Planner for sequential and parallel processing, and the Executor through virtual machines, are detailed as the main components of the BigEarth platform [5]. The presentation exemplifies the development

Crosswalking EAD: Collaboration in Archival Description

Directory of Open Access Journals (Sweden)

Amy McCrory

2005-09-01

Full Text Available Different library departments must work together, both formally and informally, in implementing encoded archival description and in repackaging descriptive information about archival collections to other formats, particularly machine-readable cataloging. The authors, one a technical services librarian and the other a special collections archivist, describe their experiences collaborating in these processes at The Ohio State University. Although other institutions may differ in their organizational structure, the authors hope to provide technical guidance, as well as a model of collaboration between archivists and technical services personnel. Careful dialogue and planning are essential to transcend the traditional divide between archival and library descriptive practices and systems.

40 CFR 233.11 - Program description.

Science.gov (United States)

2010-07-01

... organization and structure of the State agency (agencies) which will have responsibility for administering the... under § 233.10 shall include: (a) A description of the scope and structure of the State's program. The... will coordinate its enforcement strategy with that of the Corps and EPA; (h) A description of the...

Formalizing the Problem of Music Description

DEFF Research Database (Denmark)

Sturm, Bob L.; Bardeli, Rolf; Langlois, Thibault

2015-01-01

The lack of a formalism for “the problem of music descrip- tion” results in, among other things: ambiguity in what problem a music description system must address, how it should be evaluated, what criteria define its success, and the paradox that a music description system can reproduce the “ground...

Operational Efficiency And Customer Satisfaction of Restaurants: Basis For Business Operation Enhancement

Directory of Open Access Journals (Sweden)

Annie Gay Barlan-Espino

2017-02-01

Full Text Available Restaurants’ primary objective is to provide comfort and satisfaction to guest without compromising the operational efficiency of the business. This research aimed to determine the operational efficiency and customer satisfaction of restaurants as a basis for business operation enhancement. Specifically to determine the operational efficiency of the restaurant in terms of kitchen operations and dining operations and the level of customer satisfaction of the restaurant business in terms of: Product, Policies, People, Processes and Proactivity as well as the problems encountered by the restaurant in their operation and customer service. Descriptive research design was used with managers and customers as respondents of the study. It was concluded that majority of the restaurants are operating for more than a year with sufficient number of employees having enough seating capacity that accommodate large volume of customers. Restaurants are efficient on the aspect of kitchen and dining operations and sometimes encountered problems. Customers are satisfied in terms of 5 P’s. It was found out that there is no significant difference in the operational efficiency of restaurant when grouped according to profile variables. An action plan for continuous business operation enhancement on operational efficiency and customer satisfaction was proposed.

Beautiful lips and porcelain cheeks : Extracting physical descriptions from recent Dutch fiction

NARCIS (Netherlands)

Koolen, Corina; Wubben, S.; van Cranenburgh, Andreas

2014-01-01

Chick-lit novels have often been researched in literary theory, but never on the same plane as literary novels. Claims on the relative importance of physicality in chick lit are not based on an actual comparison. We therefore investigate the descriptions of characters’ physical appearance in a

Archival Descriptions from the National Archives Catalog

Data.gov (United States)

National Archives and Records Administration — Archival Descriptions from the National Archives Catalog data set provides archival descriptions of the permanent holdings of the federal government in the custody...

Inadequate description of educational interventions in ongoing randomized controlled trials

Directory of Open Access Journals (Sweden)

Pino Cécile

2012-05-01

Full Text Available Abstract Background The registration of clinical trials has been promoted to prevent publication bias and increase research transparency. Despite general agreement about the minimum amount of information needed for trial registration, we lack clear guidance on descriptions of non-pharmacologic interventions in trial registries. We aimed to evaluate the quality of registry descriptions of non-pharmacologic interventions assessed in ongoing randomized controlled trials (RCTs of patient education. Methods On 6 May 2009, we searched for all ongoing RCTs registered in the 10 trial registries accessible through the World Health Organization International Clinical Trials Registry Platform. We included trials evaluating an educational intervention (that is, designed to teach or train patients about their own health and dedicated to participants, their family members or home caregivers. We used a standardized data extraction form to collect data related to the description of the experimental intervention, the centers, and the caregivers. Results We selected 268 of 642 potentially eligible studies and appraised a random sample of 150 records. All selected trials were registered in 4 registers, mainly ClinicalTrials.gov (61%. The median [interquartile range] target sample size was 205 [100 to 400] patients. The comparator was mainly usual care (47% or active treatment (47%. A minority of records (17%, 95% CI 11 to 23% reported an overall adequate description of the intervention (that is, description that reported the content, mode of delivery, number, frequency, duration of sessions and overall duration of the intervention. Further, for most reports (59%, important information about the content of the intervention was missing. The description of the mode of delivery of the intervention was reported for 52% of studies, the number of sessions for 74%, the frequency of sessions for 58%, the duration of each session for 45% and the overall duration for 63

Fuel Handling Facility Description Document

International Nuclear Information System (INIS)

M.A. LaFountain

2005-01-01

The purpose of the facility description document (FDD) is to establish the requirements and their bases that drive the design of the Fuel Handling Facility (FHF) to allow the design effort to proceed to license application. This FDD is a living document that will be revised at strategic points as the design matures. It identifies the requirements and describes the facility design as it currently exists, with emphasis on design attributes provided to meet the requirements. This FDD was developed as an engineering tool for design control. Accordingly, the primary audience and users are design engineers. It leads the design process with regard to the flow down of upper tier requirements onto the facility. Knowledge of these requirements is essential to performing the design process. It trails the design with regard to the description of the facility. This description is a reflection of the results of the design process to date

A general description of additive and nonadditive elements of sperm competitiveness and their relation to male fertilization success.

Science.gov (United States)

Engqvist, Leif

2013-05-01

A complete understanding of male reproductive success, and thus sexual selection, often requires an insight into male success in sperm competition. Genuine conclusions on male sperm competitiveness can only be made in real competitive situations. However, statistical analyses of sperm competitiveness from fertilization success data have been shown to be problematic. Here, I first outline a comprehensive general description of the different additive and nonadditive elements relevant for the outcome of sperm competition staged between two males. Based on this description, I will highlight two main problems that are frequently encountered in experiments aiming at estimating sperm competitiveness. First, I focus on potential problems when using standardized competitors versus random mating trials, because trials with standardized competitors do not allow generalization if male-male interactions are important. Second, I illustrate the necessity to analyze data on the logit scale rather than on raw proportions, because only the logit scale allows a clean separation of additive and nonadditive effects (i.e., male × male and female × male interactions). © 2012 The Author(s). Evolution © 2012 The Society for the Study of Evolution.

Variability of photovoltaic panels efficiency depending on the value of the angle of their inclination relative to the horizon

Directory of Open Access Journals (Sweden)

Majdak Marek

2017-01-01

Full Text Available The objective of this paper was to determine the relationship between the efficiency of photovoltaic panels and the value of the angle of their inclination relative to the horizon. For the purpose of experimental research have been done tests on the photovoltaic modules made of monocrystalline, polycrystalline and amorphous silicon. The experiment consisted of measurement of the voltage and current generated by photovoltaic panels at a known value of solar radiation and a specified resistance value determined by using resistor with variable value of resistance and known value of the angle of their inclination relative to the horizon.

Stoichiometric estimates of the biochemical conversion efficiencies in tsetse metabolism

Directory of Open Access Journals (Sweden)

Custer Adrian V

2005-08-01

Full Text Available Abstract Background The time varying flows of biomass and energy in tsetse (Glossina can be examined through the construction of a dynamic mass-energy budget specific to these flies but such a budget depends on efficiencies of metabolic conversion which are unknown. These efficiencies of conversion determine the overall yields when food or storage tissue is converted into body tissue or into metabolic energy. A biochemical approach to the estimation of these efficiencies uses stoichiometry and a simplified description of tsetse metabolism to derive estimates of the yields, for a given amount of each substrate, of conversion product, by-products, and exchanged gases. This biochemical approach improves on estimates obtained through calorimetry because the stoichiometric calculations explicitly include the inefficiencies and costs of the reactions of conversion. However, the biochemical approach still overestimates the actual conversion efficiency because the approach ignores all the biological inefficiencies and costs such as the inefficiencies of leaky membranes and the costs of molecular transport, enzyme production, and cell growth. Results This paper presents estimates of the net amounts of ATP, fat, or protein obtained by tsetse from a starting milligram of blood, and provides estimates of the net amounts of ATP formed from the catabolism of a milligram of fat along two separate pathways, one used for resting metabolism and one for flight. These estimates are derived from stoichiometric calculations constructed based on a detailed quantification of the composition of food and body tissue and on a description of the major metabolic pathways in tsetse simplified to single reaction sequences between substrates and products. The estimates include the expected amounts of uric acid formed, oxygen required, and carbon dioxide released during each conversion. The calculated estimates of uric acid egestion and of oxygen use compare favorably to

Isotopic tracer studies to evaluate relative efficiency of different forms of P for growing rice on different soil types

International Nuclear Information System (INIS)

Dash, R.N.; Mohanty, S.K.; Patnaik, S.

1977-01-01

The relative efficiency of different forms of P in relation to their time of application for growing rice on different soil types has been studied by using 32 P tagged mono-, di-, and tri-calcium phosphate, ammonium nitrate phosphate containing all the P in the citrate-soluble form and potassium meta-phosphate. P-deficient acid laterite soil from Burdwan, red loam soil from Peramanpur and calcareous black soil from Hyderabad were used in the study. The different P forms were found to be compatible in the acid, red and laterite soils when the phosphorus forms were primed to moist acid soils 2 weeks prior to flooding. On application at flooding, fertilizers containing citrate-soluble phosphate were found to be less effective as compared to those containing water-soluble phosphate. In the calcareous black soil, however, the fertilizers, containing insoluble or citrate-soluble phosphates were not as efficient as the water-soluble forms, possibly because of lack of dissolution process. Potassium meta-phosphate was found to be effective in all the soil types whether applied at flooding or primed to the moist soil. (M.G.B.)

THE IMPLEMENTATION OF EFFICIENT TRADE MATRIX AND GOLD RESERVE REQUIREMENT FOR COMMODITY TRADE AMONG ASEAN COUNTRIES

Directory of Open Access Journals (Sweden)

nurul anisak

2017-06-01

Full Text Available Objective - This study attempts to implement the efficient trade matrix among five selected ASEAN countries and its settlement by the gold reserve requirements through Multi-Bilateral Payments Arrangement (MBPA.Methods – The study is a qualitative research with analytic description. The purpose of this qualitative-descriptive study is to simulate the implementation of gold in the Multi-Bilateral Payment Arrangement among ASEAN countries using the current trade data.Results – This paper argues that the Southeast Asian countries can solve the problem through their internal coordination, particularly in terms of trade. One of the efforts is to reduce even eliminate the market risk by using the efficient payment arrangement.Conclusions – The study implied that the quantity amount of gold required to settle the trade balance will be reduced from the early gross payment. However, the ASEAN countries need to strengthen the cooperation among them through maximizing the trade relationship.

Parents' knowledge, attitudes, use of pain relief methods and satisfaction related to their children's postoperative pain management: a descriptive correlational study.

Science.gov (United States)

Chng, Hui Yi; He, Hong-Gu; Chan, Sally Wai-Chi; Liam, Joanne Li Wee; Zhu, Lixia; Cheng, Karis Kin Fong

2015-06-01

To examine parents' knowledge about and attitudes towards pain management, use of pain relief strategies and satisfaction with their children's postoperative pain management, as well as the relationships among these variables. Children's postoperative pain is inadequately managed worldwide. Despite increasing emphasis on parental involvement in children's postoperative pain management, few studies have examined parents' management of their child's postoperative pain in Singapore. A descriptive correlational study. A convenience sample of 60 parents having 6- to 14-year-old children undergoing inpatient elective surgery in a public hospital in Singapore was recruited. Data were collected one day after each child's surgery using the Pain Management Knowledge and Attitudes questionnaire and the Parents' Use of Pain Relief Strategies questionnaire. Descriptive statistics, Mann-Whitney U tests, Kruskal-Wallis tests and Spearman's rank correlation coefficient were used for data analyses. Parents displayed moderate levels of knowledge, attitudes and use of pain relief methods in relation to their children's postoperative pain and pain management. They were generally satisfied with the management of their child's postoperative pain. There was significant difference in Parents' Use of Pain Relief Strategies scores between parents with and without previous experience of caring for their hospitalised child. Statistically significant positive correlations were found between parents' knowledge and attitude, knowledge and satisfaction, attitude and satisfaction, knowledge and pain relief strategies, as well as attitude and pain relief strategies. This study indicates the need to provide parents with more information regarding their children's postoperative pain management. Future studies are needed to develop educational interventions for parents to improve their knowledge and attitudes, which will eventually improve their use of pain relief strategies for their children. Health

The Norwegian Electric Power System - System Description and Future Developments; Norsk kraftforsyning - dagens system og fremtidig utvikling

Energy Technology Data Exchange (ETDEWEB)

Hagen, Janne Merete; Nystuen, Kjell Olav; Fridheim, Haavard; Rutledal, Frode

2000-09-01

This report presents a description of the present Norwegian electric power system, as well as a discussion of emerging trends and future developments in this system. The report provides the basis for FFI's current vulnerability analysis of the electric power system. Norway's electric power system is getting increasingly complex, due to a large-scale implementation of electronic components and information systems. Workforce reductions and efficiency improvements dominate the development of the electric power sector. Norway is also becoming increasingly dependent on foreign power sources. These trends provide for an entirely different electric power system than just a few years ago. Also, these trends make it virtually impossible to present a ''static'' description of the system. Thus, the report also contains a scenario, describing possible future developments of the system until 2010. (author)

Direct: Ontology based discovery of responsibility and causality in legal case descriptions

NARCIS (Netherlands)

Breuker, J.A.P.J.; Hoekstra, R.J.; Gordon, T.

2004-01-01

In this paper we present DIRECT, a system forautomatic discovery of responsibility and causal relations in legal case descriptions based on LRI-Core, a core ontology that covers the main concepts that are common to all legal domains. These domains have a predominant common-sense character - the law

Effect of spectral shape in the relative efficiency of LiF: Mg,Ti exposed to 20 keV effective energy X-rays

Energy Technology Data Exchange (ETDEWEB)

Ixquiac-Cabrera, J.M., E-mail: mixquiac@nucleares.unam.m [Instituto de Ciencias Nucleares, Universidad Nacional Autonoma de Mexico, A.P. 70-543, 04510 DF (Mexico); Departamento de Fisica, Universidad de San Carlos de Guatemala, Edificio T-1 Facultad de Ingenieria (Guatemala); Brandan, M.E.; Martinez-Davalos, A.; Rodriguez-Villafuerte, M.; Ruiz-Trejo, C. [Instituto de Fisica, Universidad Nacional Autonoma de Mexico, A.P. 20-364, 01000 DF (Mexico); Gamboa-deBuen, I. [Instituto de Ciencias Nucleares, Universidad Nacional Autonoma de Mexico, A.P. 70-543, 04510 DF (Mexico)

2011-04-15

This work is aimed at studying the possible dependence of the thermoluminescent response of LiF:Mg,Ti (TLD-100) on the X-ray beam spectrum. TLD-100 chips were irradiated with 20 keV effective energy filtered tungsten X-ray spectra, generated by a tube operated at 30, 40, 50, 60, 70 and 80 kV, and the response was measured relative to the response to {sup 60}Co gammas. TLDs were exposed in air at air kerma values between 50 and 300 mGy. Glow curve deconvolution into 8 peaks (3, 4, 5, 6a, 6b, 7, 8 and 9) was performed in order to evaluate the response of individual peaks and regions of interest in the glow curve. Results show that all peaks display a linear response, at least up to 200 mGy, for all X-ray beam qualities. The relative response of the total glow curve area, the dosimetric region (peaks 3 + 4 + 5) and peaks 5 to 9 is statistically constant for beams generated by voltages from 30 to 70 kV; for 80 kV, the values are lower by about 20% for peaks 8 and 9 and 9% for the rest. The relative efficiency for the glow curve area, the dosimetric region and peaks 5 (1.15, 1.10 and 1.13), peaks 8 and 9 (2.05 and 1.55) do not depend on the beam spectrum between 30 and 70 kV, while for 80 kV the efficiency is lower. For peaks 6a, 6b and 7, relative efficiencies (1.91, 2.94 and 2.60) are voltage independent.

Energy Efficient Community Development in California: Chula Vista Research Project

Energy Technology Data Exchange (ETDEWEB)

Gas Technology Institute

2009-03-31

In 2007, the U.S. Department of Energy joined the California Energy Commission in funding a project to begin to examine the technical, economic and institutional (policy and regulatory) aspects of energy-efficient community development. That research project was known as the Chula Vista Research Project for the host California community that co-sponsored the initiative. The researches proved that the strategic integration of the selected and economically viable buildings energy efficiency (EE) measures, photovoltaics (PV), distributed generation (DG), and district cooling can produce significant reductions in aggregate energy consumption, peak demand and emissions, compared to the developer/builder's proposed baseline approach. However, the central power plant emission reductions achieved through use of the EE-DG option would increase local air emissions. The electric and natural gas utility infrastructure impacts associated with the use of the EE and EE-PV options were deemed relatively insignificant while use of the EE-DG option would result in a significant reduction of necessary electric distribution facilities to serve a large-scale development project. The results of the Chula Vista project are detailed in three separate documents: (1) Energy-Efficient Community Development in California; Chula Vista Research Project report contains a detailed description of the research effort and findings. This includes the methodologies, and tools used and the analysis of the efficiency, economic and emissions impacts of alternative energy technology and community design options for two development sites. Research topics covered included: (a) Energy supply, demand, and control technologies and related strategies for structures; (b) Application of locally available renewable energy resources including solar thermal and PV technology and on-site power generation with heat recovery; (c) Integration of local energy resources into district energy systems and existing

Systems for the monitoring of working conditions relating to health and safety : extensive descriptions : Belgium, Germany, Luxembourg, The Netherlands

NARCIS (Netherlands)

Prins, R.; Verboon, F.

1991-01-01

This report contains the extensive descriptions of (some of) the monitoring systems on health and safety in use in the Benelux countries and Germany. The project of which this report is a part aimed at gathering information on monitoring systems throughout the EC member states.

Employing a Qualitative Description Approach in Health Care Research.

Science.gov (United States)

Bradshaw, Carmel; Atkinson, Sandra; Doody, Owen

2017-01-01

A qualitative description design is particularly relevant where information is required directly from those experiencing the phenomenon under investigation and where time and resources are limited. Nurses and midwives often have clinical questions suitable to a qualitative approach but little time to develop an exhaustive comprehension of qualitative methodological approaches. Qualitative description research is sometimes considered a less sophisticated approach for epistemological reasons. Another challenge when considering qualitative description design is differentiating qualitative description from other qualitative approaches. This article provides a systematic and robust journey through the philosophical, ontological, and epistemological perspectives, which evidences the purpose of qualitative description research. Methods and rigor issues underpinning qualitative description research are also appraised to provide the researcher with a systematic approach to conduct research utilizing this approach. The key attributes and value of qualitative description research in the health care professions will be highlighted with the aim of extending its usage.

Site descriptive modelling - strategy for integrated evaluation

International Nuclear Information System (INIS)

Andersson, Johan

2003-02-01

The current document establishes the strategy to be used for achieving sufficient integration between disciplines in producing Site Descriptive Models during the Site Investigation stage. The Site Descriptive Model should be a multidisciplinary interpretation of geology, rock mechanics, thermal properties, hydrogeology, hydrogeochemistry, transport properties and ecosystems using site investigation data from deep bore holes and from the surface as input. The modelling comprise the following iterative steps, evaluation of primary data, descriptive and quantitative modelling (in 3D), overall confidence evaluation. Data are first evaluated within each discipline and then the evaluations are checked between the disciplines. Three-dimensional modelling (i.e. estimating the distribution of parameter values in space and its uncertainty) is made in a sequence, where the geometrical framework is taken from the geological model and in turn used by the rock mechanics, thermal and hydrogeological modelling etc. The three-dimensional description should present the parameters with their spatial variability over a relevant and specified scale, with the uncertainty included in this description. Different alternative descriptions may be required. After the individual discipline modelling and uncertainty assessment a phase of overall confidence evaluation follows. Relevant parts of the different modelling teams assess the suggested uncertainties and evaluate the feedback. These discussions should assess overall confidence by, checking that all relevant data are used, checking that information in past model versions is considered, checking that the different kinds of uncertainty are addressed, checking if suggested alternatives make sense and if there is potential for additional alternatives, and by discussing, if appropriate, how additional measurements (i.e. more data) would affect confidence. The findings as well as the modelling results are to be documented in a Site Description

MHD description of plasma: handbook of plasma physics

International Nuclear Information System (INIS)

Kulsrud, R.M.

1980-10-01

The basic sets of MHD equations for the description of a plasma in various limits are derived and their usefulness and limits of validity are discussed. These limits are: the one fluid collisional plasma, the two fluid collisional plasma, the Chew-Goldberger Low formulation of the guiding center limit of a collisionless plasma and the double-adiabatic limit. Conservation relations are derived from these sets and the mathematics of the concept of flux freezing is given. An example is given illustrating the differences between guiding center theory and double adiabatic theory

CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

Energy Technology Data Exchange (ETDEWEB)

J.F. Beesley

2005-04-21

The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

International Nuclear Information System (INIS)

Beesley. J.F.

2005-01-01

The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process

The relationship between symbolic interactionism and interpretive description.

Science.gov (United States)

Oliver, Carolyn

2012-03-01

In this article I explore the relationship between symbolic interactionist theory and interpretive description methodology. The two are highly compatible, making symbolic interactionism an excellent theoretical framework for interpretive description studies. The pragmatism underlying interpretive description supports locating the methodology within this cross-disciplinary theory to make it more attractive to nonnursing researchers and expand its potential to address practice problems across the applied disciplines. The theory and method are so compatible that symbolic interactionism appears to be part of interpretive description's epistemological foundations. Interpretive description's theoretical roots have, to date, been identified only very generally in interpretivism and the philosophy of nursing. A more detailed examination of its symbolic interactionist heritage furthers the contextualization or forestructuring of the methodology to meet one of its own requirements for credibility.

The Description of Tenses Used by the Journalists: Bloomberg and Harsh inThe Jakarta Post

OpenAIRE

Shilha, Ahada

2015-01-01

This paper consists of Introduction, Review of Related Literature, Description of Tenses, and Conclusion. The data for description are taken from the Jakarta Post which was published on Saturday March 14, 2015 which was written by the Journalists Bloomberg dealing with Rupiah Leads Fall in Asia Forex Markets, and Harsh V. Pant dealing with India Challenges Old Assumptions, now she is very eager to give a conclusion on it. The data shown that Bloomberg wrote twenty-one sentences by applying...

The economic value of corporate eco-efficiency

NARCIS (Netherlands)

Guenster, N.; Bauer, R.; Derwall, J.M.M.; Koedijk, C.G.

2011-01-01

This study adds new insights to the long-running corporate environmental-financial performance debate by focusing on the concept of eco-efficiency. Using a new database of eco-efficiency scores, we analyse the relation between eco-efficiency and financial performance from 1997 to 2004. We report

RETRIEVAL EQUIPMENT DESCRIPTIONS

International Nuclear Information System (INIS)

J. Steinhoff

1997-01-01

The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) retrieval from the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. There are no quality assurance requirements or QA controls in this document. Retrieval under normal conditions is accomplished with the same fleet of equipment as is used for emplacement. Descriptions of equipment used for retrieval under normal conditions is found in Emplacement Equipment Descriptions, DI: BCAF00000-01717-5705-00002 (a document in progress). Equipment used for retrieval under abnormal conditions is addressed in this document and consists of the following: (1) Inclined Plane Hauler; (2) Bottom Lift Transporter; (3) Load Haul Dump (LHD) Loader; (4) Heavy Duty Forklift for Emplacement Drifts; (5) Covered Shuttle Car; (6) Multipurpose Vehicle; and (7) Scaler

On Resource Description Capabilities of On-Board Tools for Resource Management in Cloud Networking and NFV Infrastructures

OpenAIRE

Tutschku, Kurt; Ahmadi Mehri, Vida; Carlsson, Anders; Chivukula, Krishna Varaynya; Johan, Christenson

2016-01-01

The rapid adoption of networks that are based on "cloudification" and Network Function Virtualisation (NFV) comes from the anticipated high cost savings of up to 70% in their build and operation. The high savings are founded in the use of general standard servers, instead of single-purpose hardware, and by efficiency resource sharing through virtualisation concepts. In this paper, we discuss the capabilities of resource description of "on-board" tools, i.e. using standard Linux commands, to e...

High efficiency video coding coding tools and specification

CERN Document Server

Wien, Mathias

2015-01-01

The video coding standard High Efficiency Video Coding (HEVC) targets at improved compression performance for video resolutions of HD and beyond, providing Ultra HD video at similar compressed bit rates as for HD video encoded with the well-established video coding standard H.264 | AVC. Based on known concepts, new coding structures and improved coding tools have been developed and specified in HEVC. The standard is expected to be taken up easily by established industry as well as new endeavors, answering the needs of todays connected and ever-evolving online world. This book presents the High Efficiency Video Coding standard and explains it in a clear and coherent language. It provides a comprehensive and consistently written description, all of a piece. The book targets at both, newbies to video coding as well as experts in the field. While providing sections with introductory text for the beginner, it suits as a well-arranged reference book for the expert. The book provides a comprehensive reference for th...

Employing a Qualitative Description Approach in Health Care Research

Science.gov (United States)

Bradshaw, Carmel; Atkinson, Sandra; Doody, Owen

2017-01-01

A qualitative description design is particularly relevant where information is required directly from those experiencing the phenomenon under investigation and where time and resources are limited. Nurses and midwives often have clinical questions suitable to a qualitative approach but little time to develop an exhaustive comprehension of qualitative methodological approaches. Qualitative description research is sometimes considered a less sophisticated approach for epistemological reasons. Another challenge when considering qualitative description design is differentiating qualitative description from other qualitative approaches. This article provides a systematic and robust journey through the philosophical, ontological, and epistemological perspectives, which evidences the purpose of qualitative description research. Methods and rigor issues underpinning qualitative description research are also appraised to provide the researcher with a systematic approach to conduct research utilizing this approach. The key attributes and value of qualitative description research in the health care professions will be highlighted with the aim of extending its usage. PMID:29204457

Information resource description creating and managing metadata

CERN Document Server

Hider, Philip

2012-01-01

An overview of the field of information organization that examines resource description as both a product and process of the contemporary digital environment.This timely book employs the unifying mechanism of the semantic web and the resource description framework to integrate the various traditions and practices of information and knowledge organization. Uniquely, it covers both the domain-specific traditions and practices and the practices of the ?metadata movement' through a single lens ? that of resource description in the broadest, semantic web sense.This approach more readily accommodate

Energy Efficiency Improvement and Cost Saving Opportunities for the Baking Industry: An ENERGY STAR^® Guide for Plant and Energy Managers

Energy Technology Data Exchange (ETDEWEB)

Masanet, Eric [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Therkelsen, Peter [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Worrell, Ernst [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division

2012-12-28

The U.S. baking industry—defined in this Energy Guide as facilities engaged in the manufacture of commercial bakery products such as breads, rolls, frozen cakes, pies, pastries, and cookies and crackers—consumes over $800 million worth of purchased fuels and electricity per year. Energy efficiency improvement is an important way to reduce these costs and to increase predictable earnings, especially in times of high energy price volatility. There are a variety of opportunities available at individual plants to reduce energy consumption in a cost-effective manner. This Energy Guide discusses energy efficiency practices and energy-efficient technologies that can be implemented at the component, process, facility, and organizational levels. Many measure descriptions include expected savings in energy and energy-related costs, based on case study data from real-world applications in food processing facilities and related industries worldwide. Typical measure payback periods and references to further information in the technical literature are also provided, when available. A summary of basic, proven measures for improving plant-level water efficiency is also provided. The information in this Energy Guide is intended to help energy and plant managers in the U.S. baking industry reduce energy and water consumption in a cost-effective manner while maintaining the quality of products manufactured. Further research on the economics of all measures—as well as on their applicability to different production practices—is needed to assess their cost effectiveness at individual plants.

Regge-like relation and a universal description of heavy-light systems

Energy Technology Data Exchange (ETDEWEB)

Chen, Kan; Liu, Xiang [Lanzhou University, School of Physical Science and Technology, Lanzhou (China); Lanzhou University, Research Center for Hadron and CSR Physics, Institute of Modern Physics of CAS, Lanzhou (China); Dong, Yubing [Institute of High Energy Physics, CAS, Beijing (China); Theoretical Physics Center for Science Facilities (TPCSF), CAS, Beijing (China); University of Chinese Academy of Sciences, School of Physical Sciences, Beijing (China); Lue, Qi-Fang [Institute of High Energy Physics, CAS, Beijing (China); Hunan Normal University, Synergetic Innovation Center for Quantum Effects and Applications (SICQEA), Changsha (China); Matsuki, Takayuki [Tokyo Kasei University, Tokyo (Japan); Nishina Center, RIKEN, Theoretical Research Division, Wako, Saitama (Japan)

2018-01-15

Using the Regge-like formula (M - m{sub Q}){sup 2} = πσL between hadron mass M and angular momentum L with a heavy quark mass m{sub Q} and a string tension σ, we analyze all the heavy-light systems, i.e., D/D{sub s}/B/B{sub s} mesons and charmed and bottom baryons. Numerical plots are obtained for all the heavy-light mesons of experimental data whose slope becomes nearly equal to 1/2 of that for light hadrons. Assuming that charmed and bottom baryons consist of one heavy quark and one light cluster of two light quarks (diquark), we apply the formula to all the heavy-light baryons including the recently discovered Ω{sub c} and find that these baryons experimentally measured satisfy the above formula. We predict the average mass values of B, B{sub s}, Λ{sub b}, Σ{sub c}, Ξ{sub c}, and Ω{sub c} with L = 2 to be 6.01, 6.13, 6.15, 3.05, 3.07, and 3.34 GeV, respectively. Our results on baryons suggest that these baryons can be safely regarded as heavy quark-light cluster configuration. We also find a universal description for all the heavy-light mesons as well as baryons, i.e., one unique line is enough to describe both of charmed and bottom heavy-light systems. Our results suggest that instead of mass itself, gluon flux energy is essential to obtain a linear trajectory. Our method gives a straight line for B{sub c} although the curved parent Regge trajectory was suggested before. (orig.)

Descriptive data analysis.

Science.gov (United States)

Thompson, Cheryl Bagley

2009-01-01

This 13th article of the Basics of Research series is first in a short series on statistical analysis. These articles will discuss creating your statistical analysis plan, levels of measurement, descriptive statistics, probability theory, inferential statistics, and general considerations for interpretation of the results of a statistical analysis.

The projective hinge: phylogeny and ontogeny for a new descriptive geometry

Directory of Open Access Journals (Sweden)

Agostino De Rosa

2012-06-01

Full Text Available The architect- draughtsman uses a theoretical–graphic code whose foundations - of obvious Platonic lineage - attempt to organize and make sense to the reality. Perhaps the most powerful tool that he has in his hands  to translate the existing world in a dense and polysemous model and to envisage the future one, in a compelling and creative way, becomes from descriptive geometry. Today, the context in which the architect works is violently changed and the "geometry", in the digital image, seems to have lost memory of its projective origins. Two loci - one related to the stonecutting’s tradition, the other to the experiences of contemporary art - seem to be able to bring out in a renewed way, "the figures of the demonstration" associated with descriptive geometry.

Efficiency versus speed in quantum heat engines: Rigorous constraint from Lieb-Robinson bound

Science.gov (United States)

Shiraishi, Naoto; Tajima, Hiroyasu

2017-08-01

A long-standing open problem whether a heat engine with finite power achieves the Carnot efficiency is investgated. We rigorously prove a general trade-off inequality on thermodynamic efficiency and time interval of a cyclic process with quantum heat engines. In a first step, employing the Lieb-Robinson bound we establish an inequality on the change in a local observable caused by an operation far from support of the local observable. This inequality provides a rigorous characterization of the following intuitive picture that most of the energy emitted from the engine to the cold bath remains near the engine when the cyclic process is finished. Using this description, we prove an upper bound on efficiency with the aid of quantum information geometry. Our result generally excludes the possibility of a process with finite speed at the Carnot efficiency in quantum heat engines. In particular, the obtained constraint covers engines evolving with non-Markovian dynamics, which almost all previous studies on this topic fail to address.

CORECOOL, model description of the programme

International Nuclear Information System (INIS)

Andersen, J.G.M.; Abel-Larsen, H.

1978-11-01

CORECOOL, Convection and Radiation Emergency Cooling, is a model for the two-phase flow and heat transfer in a fuel element during the core heat-up phase following a loss of coolant accident. The model for the two-phase flow is based on a solution of the conservation equations with a separate description of the two phases and thermodynamic non-equilibrium. The flow-regimes considered are drop flow and film flow. The heat transfer consists of convection, sputtering and radiation heat transfer. The documentation of CORECOOL consists of four parts: I) model description, II) programme description (COMMERCIAL), III) users guide (COMMERCIAL) IV) verification (COMMERCIAL). CORECOOL is a joint project between Risoe National Laboratory Denmark and General Electric Company, San Jose, USA. (author)

Monitoring changes in economy-wide energy efficiency: From energy-GDP ratio to composite efficiency index

International Nuclear Information System (INIS)

Ang, B.W.

2006-01-01

Since the 1973 world oil crisis, monitoring trends in energy efficiency at the economy-wide level has been an important component of energy strategy in many countries. To support this effort, various energy efficiency-related indicators have been developed. We examine some classical indicators which are often found in national and international energy studies in the 1970s and 1980s. We then describe the recent developments in using the index decomposition analysis to give an economy-wide composite energy efficiency index based on a bottom-up approach. This composite index is superior to the classical indicators as an economy-wide energy efficiency measure and has lately been adopted by a growing number of countries for national energy efficiency trend monitoring

Age-related changes of frontal-midline theta is predictive of efficient memory maintenance.

Science.gov (United States)

Kardos, Z; Tóth, B; Boha, R; File, B; Molnár, M

2014-07-25

Frontal areas are thought to be the coordinators of working memory processes by controlling other brain areas reflected by oscillatory activities like frontal-midline theta (4-7 Hz). With aging substantial changes can be observed in the frontal brain areas, presumably leading to age-associated changes in cortical correlates of cognitive functioning. The present study aimed to test whether altered frontal-midline theta dynamics during working memory maintenance may underlie the capacity deficits observed in older adults. 33-channel EEG was recorded in young (18-26 years, N=20) and old (60-71 years, N=16) adults during the retention period of a visual delayed match-to-sample task, in which they had to maintain arrays of 3 or 5 colored squares. An additional visual odd-ball task was used to be able to measure the electrophysiological indices of sustained attentional processes. Old participants showed reduced frontal theta activity during both tasks compared to the young group. In the young memory maintenance-related frontal-midline theta activity was shown to be sensitive both to the increased memory demands and to efficient subsequent memory performance, whereas the old adults showed no such task-related difference in the frontal theta activity. The decrease of frontal-midline theta activity in the old group indicates that cerebral aging may alter the cortical circuitries of theta dynamics, thereby leading to age-associated decline of working memory maintenance function. Copyright © 2014 IBRO. Published by Elsevier Ltd. All rights reserved.

On the limits of the effective description of hyperbolic materials in the presence of surface waves

International Nuclear Information System (INIS)

Tschikin, Maria; Biehs, Svend-Age; Messina, Riccardo; Ben-Abdallah, Philippe

2013-01-01

Here, we address the question of the validity of an effective description for hyperbolic metamaterials in the near-field region. We show that the presence of localized modes such as surface waves drastically limits the validity of the effective description, and requires revisiting the concept of homogenization in the near-field. We demonstrate, from exact scattering matrix calculations for multilayer hyperbolic structures, that one can find surface modes in spectral regions where the effective approach predicts hyperbolic modes only. Hence, the presence of surface modes which are not accounted for in the effective description can lead to physical misinterpretations in the description of hyperbolic materials and their related properties. In particular, we discuss in detail how the choice of the topmost layer affects the validity of the effective medium approach for calculating the local density of states and the super-Planckian thermal radiation. (paper)

Nuclear matter descriptions including quark structure of the hadrons

International Nuclear Information System (INIS)

Huguet, R.

2008-07-01

It is nowadays well established that nucleons are composite objects made of quarks and gluons, whose interactions are described by Quantum chromodynamics (QCD). However, because of the non-perturbative character of QCD at the energies of nuclear physics, a description of atomic nuclei starting from quarks and gluons is still not available. A possible alternative is to construct effective field theories based on hadronic degrees of freedom, in which the interaction is constrained by QCD. In this framework, we have constructed descriptions of infinite nuclear matter in relativistic mean field theories taking into account the quark structure of hadrons. In a first approach, the in medium modifications of mesons properties is dynamically obtained in a Nambu-Jona-Lasinio (NJL) quark model. This modification is taken into account in a relativistic mean field theory based on a meson exchange interaction between nucleons. The in-medium modification of mesons masses and the properties of infinite nuclear matter have been studied. In a second approach, the long and short range contributions to the in-medium modification of the nucleon are determined. The short range part is obtained in a NJL quark model of the nucleon. The long range part, related to pions exchanges between nucleons, has been determined in the framework of Chiral Perturbation theory. These modifications have been used to constrain the couplings of a point coupling relativistic mean field model. A realistic description of the saturation properties of nuclear matter is obtained. (author)

Energy efficient policy impact in India: case study of investment in industrial energy efficiency

International Nuclear Information System (INIS)

Yang, M.

2006-01-01

The objective of this paper is to identify the effectiveness of energy policy and capital investment in energy efficiency technologies in the industrial sector in India. Indian energy policies relating to industrial energy efficiency over the past 25 years are briefly reviewed, and a comparison study of these energy efficiency policies and strategies in India and China has been carried out. Interviews were conducted with a number of government policy-making institutions and a national industrial development bank. The accounts of 26 industrial enterprises which applied and used a loan of the Asian Development Bank were audited for data collection. Field-visits to seven industrial entrepreneurs were undertaken in a case study. Methodologies used in this study include documentation, cross-country reviews on energy policies, questionnaire design and distribution in the industrial sector, and on-site auditing of energy efficiency technologies. This paper concludes that current energy policies and strategies in India need further improvement to promote energy efficiency investment and energy efficiency technology development in the industrial sector. This paper will interest those policy makers and industrial entrepreneurs who are willing to finance energy efficiency projects and improve energy efficiency in the industrial sector. (author)

Energy efficiency policy impact in India: case study of investment in industrial energy efficiency

International Nuclear Information System (INIS)

Yang Ming

2006-01-01

The objective of this paper is to identify the effectiveness of energy policy and capital investment in energy efficiency technologies in the industrial sector in India. Indian energy policies relating to industrial energy efficiency over the past 25 years are briefly reviewed, and a comparison study of these energy efficiency policies and strategies in India and China has been carried out. Interviews were conducted with a number of government policy-making institutions and a national industrial development bank. The accounts of 26 industrial enterprises which applied and used a loan of the Asian Development Bank were audited for data collection. Field-visits to seven industrial entrepreneurs were undertaken in a case study. Methodologies used in this study include documentation, cross-country reviews on energy policies, questionnaire design and distribution in the industrial sector, and on-site auditing of energy efficiency technologies. This paper concludes that current energy policies and strategies in India need further improvement to promote energy efficiency investment and energy efficiency technology development in the industrial sector. This paper will interest those policy makers and industrial entrepreneurs who are willing to finance energy efficiency projects and improve energy efficiency in the industrial sector

Indicators for industrial energy efficiency in India

International Nuclear Information System (INIS)

Gielen, Dolf; Taylor, Peter

2009-01-01