Assessment of Materials Issues for Light-Water Small Modular Reactors

Energy Technology Data Exchange (ETDEWEB)

Sandusky, David; Lunceford, Wayne; Bruemmer, Stephen M.; Catalan, Michael A.

2013-02-01

The primary objective of this report is to evaluate materials degradation issue unique to the operational environments of LWSMR. Concerns for specific primary system components and materials are identified based on the review of design information shared by mPower and NuScale. Direct comparisons are made to materials issues recognized for advanced large PWRs and research activities are recommended as needed. The issues identified are intended to improve the capability of industry to evaluate the significance of any degradation that might occur during long-term LWSMR operation and by extension affect the importance of future supporting R&D.

Molecular modeling and multiscaling issues for electronic material applications

CERN Document Server

Iwamoto, Nancy; Yuen, Matthew; Fan, Haibo

Volume 1 : Molecular Modeling and Multiscaling Issues for Electronic Material Applications provides a snapshot on the progression of molecular modeling in the electronics industry and how molecular modeling is currently being used to understand material performance to solve relevant issues in this field. This book is intended to introduce the reader to the evolving role of molecular modeling, especially seen through the eyes of the IEEE community involved in material modeling for electronic applications.  Part I presents  the role that quantum mechanics can play in performance prediction, such as properties dependent upon electronic structure, but also shows examples how molecular models may be used in performance diagnostics, especially when chemistry is part of the performance issue.  Part II gives examples of large-scale atomistic methods in material failure and shows several examples of transitioning between grain boundary simulations (on the atomistic level)and large-scale models including an example ...

Special nuclear materials cutoff exercise: Issues and lessons learned. Volume 3

Energy Technology Data Exchange (ETDEWEB)

Libby, R.A.; Segal, J.E.; Stanbro, W.D.; Davis, C.

1995-08-01

This document is appendices D-J for the Special Nuclear Materials Cutoff Exercise: Issues and Lessons Learned. Included are discussions of the US IAEA Treaty, safeguard regulations for nuclear materials, issue sheets for the PUREX process, and the LANL follow up activity for reprocessing nuclear materials.

Special nuclear materials cutoff exercise: Issues and lessons learned. Volume 3

International Nuclear Information System (INIS)

Libby, R.A.; Segal, J.E.; Stanbro, W.D.; Davis, C.

1995-08-01

This document is appendices D-J for the Special Nuclear Materials Cutoff Exercise: Issues and Lessons Learned. Included are discussions of the US IAEA Treaty, safeguard regulations for nuclear materials, issue sheets for the PUREX process, and the LANL follow up activity for reprocessing nuclear materials

Materials issues in silicon integrated circuit processing

International Nuclear Information System (INIS)

Wittmer, M.; Stimmell, J.; Strathman, M.

1986-01-01

The symposium on ''Materials Issues in Integrated Circuit Processing'' sought to bring together all of the materials issued pertinent to modern integrated circuit processing. The inherent properties of the materials are becoming an important concern in integrated circuit manufacturing and accordingly research in materials science is vital for the successful implementation of modern integrated circuit technology. The session on Silicon Materials Science revealed the advanced stage of knowledge which topics such as point defects, intrinsic and extrinsic gettering and diffusion kinetics have achieved. Adaption of this knowledge to specific integrated circuit processing technologies is beginning to be addressed. The session on Epitaxy included invited papers on epitaxial insulators and IR detectors. Heteroepitaxy on silicon is receiving great attention and the results presented in this session suggest that 3-d integrated structures are an increasingly realistic possibility. Progress in low temperature silicon epitaxy and epitaxy of thin films with abrupt interfaces was also reported. Diffusion and Ion Implantation were well presented. Regrowth of implant-damaged layers and the nature of the defects which remain after regrowth were discussed in no less than seven papers. Substantial progress was also reported in the understanding of amorphising boron implants and the use of gallium implants for the formation of shallow p/sup +/ -layers

Issues in recycling and disposal of radioactively contaminated materials

International Nuclear Information System (INIS)

Kluk, A.F.; Hocking, E.K.; Roberts, R.; Phillips, J.W.

1993-01-01

The Department of Energy's present stock of potentially re-usable and minimally radioactively contaminated materials will increase significantly as the Department's remediation activities expand. As part of its effort to minimize wastes, the Department is pursuing several approaches to recover valuable materials such as nickel, copper, and steel, and reduce the high disposal costs associated with contaminated materials. Key approaches are recycling radioactively contaminated materials or disposing of them as non-radioactive waste. These approaches are impeded by a combination of potentially conflicting Federal regulations, State actions, and Departmental policies. Actions to promote or implement these approaches at the Federal, State, or Departmental level involve issues which must be addressed and resolved. The paramount issue is the legal status of radioactively contaminated materials and the roles of the Federal and State governments in regulating those materials. Public involvement is crucial in the debate surrounding the fate of radioactively contaminated materials

Phase-change materials for non-volatile memory devices: from technological challenges to materials science issues

Science.gov (United States)

Noé, Pierre; Vallée, Christophe; Hippert, Françoise; Fillot, Frédéric; Raty, Jean-Yves

2018-01-01

Chalcogenide phase-change materials (PCMs), such as Ge-Sb-Te alloys, have shown outstanding properties, which has led to their successful use for a long time in optical memories (DVDs) and, recently, in non-volatile resistive memories. The latter, known as PCM memories or phase-change random access memories (PCRAMs), are the most promising candidates among emerging non-volatile memory (NVM) technologies to replace the current FLASH memories at CMOS technology nodes under 28 nm. Chalcogenide PCMs exhibit fast and reversible phase transformations between crystalline and amorphous states with very different transport and optical properties leading to a unique set of features for PCRAMs, such as fast programming, good cyclability, high scalability, multi-level storage capability, and good data retention. Nevertheless, PCM memory technology has to overcome several challenges to definitively invade the NVM market. In this review paper, we examine the main technological challenges that PCM memory technology must face and we illustrate how new memory architecture, innovative deposition methods, and PCM composition optimization can contribute to further improvements of this technology. In particular, we examine how to lower the programming currents and increase data retention. Scaling down PCM memories for large-scale integration means the incorporation of the PCM into more and more confined structures and raises materials science issues in order to understand interface and size effects on crystallization. Other materials science issues are related to the stability and ageing of the amorphous state of PCMs. The stability of the amorphous phase, which determines data retention in memory devices, can be increased by doping the PCM. Ageing of the amorphous phase leads to a large increase of the resistivity with time (resistance drift), which has up to now hindered the development of ultra-high multi-level storage devices. A review of the current understanding of all these

Structural materials issues for the next generation fission reactors

Science.gov (United States)

Chant, I.; Murty, K. L.

2010-09-01

Generation-IV reactor design concepts envisioned thus far cater to a common goal of providing safer, longer lasting, proliferation-resistant, and economically viable nuclear power plants. The foremost consideration in the successful development and deployment of Gen-W reactor systems is the performance and reliability issues involving structural materials for both in-core and out-of-core applications. The structural materials need to endure much higher temperatures, higher neutron doses, and extremely corrosive environments, which are beyond the experience of the current nuclear power plants. Materials under active consideration for use in different reactor components include various ferritic/martensitic steels, austenitic stainless steels, nickel-base superalloys, ceramics, composites, etc. This article addresses the material requirements for these advanced fission reactor types, specifically addressing structural materials issues depending on the specific application areas.

Safeguard and security issues for the U.S. Fissile Materials Disposition Program

International Nuclear Information System (INIS)

Jaeger, C.D.; Moya, R.W.; Duggan, R.A.

1995-01-01

The Department of Energy's Office of Materials Disposition (MD) is analyzing long-term storage and disposition options for fissile materials, preparing a Programmatic Environmental Impact Statement (PEIS), preparing for a Record of Decision (ROD) regarding this material, and conducting other related activities. A primary objective of this program is to support U.S. nonproliferation policy by reducing major security risks. Particular areas of concern are the acquisition of this material by unauthorized persons and preventing the reintroduction of the material for use in weapons. This paper presents some of the issues, definitions, and assumptions addressed by the Safeguards and Security Project Team in support of the Fissile Materials Disposition Program (FMDP). The discussion also includes some preliminary ideas regarding safeguards and security criteria that are applicable to the screening of disposition options

Safeguards and security issues for the U.S. Fissile Materials Disposition Program

International Nuclear Information System (INIS)

Jaeger, C.D.; Moya, R.W.; Duggan, R.A.

1995-01-01

The Department of Energy's Office of Materials Disposition (MD) is analyzing long-term storage and disposition options for fissile materials, preparing a Programmatic Environmental Impact Statement (PEIS), preparing for a Record of Decision (ROD) regarding this material, and conducting other related activities. A primary objective of this program is to support US nonproliferation policy by reducing major security risks. Particular areas of concern are the acquisition of this material by unauthorized persons and preventing the reintroduction of the material for use in weapons. This paper presents some of the issues, definitions, and assumptions addressed by the Safeguards and Security Project Team in support of the Fissile Materials Disposition Program (FMDP). The discussion also includes some preliminary ideas regarding safeguards and security criteria that are applicable to the screening of disposition options

Problems in complying with regulations related to low activity materials: Nuclear fuel cycle issues

International Nuclear Information System (INIS)

Coates, R.

1997-01-01

The range of issues relating to exemption and clearance within the nuclear fuel cycle is reviewed. It is concluded that current regulatory systems and the underpinning technical criteria are potentially inflexible and over-conservative, resulting in an imbalance in the use of society's resources. Proposals are developed for establishing practical requirements which would ensure that resource allocation is commensurate with the magnitude of the risks and in broad proportion to the other risks affecting society. Such an approach would be consistent with the concept of sustainability and could support wider public acceptance of these issues. Within this approach the practical distinction between exemption and clearance is challenged. (author)

Robustness-related issues in speaker recognition

CERN Document Server

Zheng, Thomas Fang

2017-01-01

This book presents an overview of speaker recognition technologies with an emphasis on dealing with robustness issues. Firstly, the book gives an overview of speaker recognition, such as the basic system framework, categories under different criteria, performance evaluation and its development history. Secondly, with regard to robustness issues, the book presents three categories, including environment-related issues, speaker-related issues and application-oriented issues. For each category, the book describes the current hot topics, existing technologies, and potential research focuses in the future. The book is a useful reference book and self-learning guide for early researchers working in the field of robust speech recognition.

Experimental programs and facilities for ASTRID development related to the Severe Accident Issue

International Nuclear Information System (INIS)

Journeau, C.; Suteau, C.; Trotignon, L.; Willermoz, G.; Ducros, G.; Courouau, J.L.; Ruggieri, J.M.; Serre, F.

2013-01-01

A comprehensive experimental program has been launched in order to gain new data in support of the severe accident studies related to the ASTRID demonstrator. The main new issues with respect to the historic experimental database are mainly related to new design options: heterogeneous core with thick pins; new materials; new severe accident mitigation systems such as - corium discharge channels; - core-catcher with sacrificial materials; - some issues remaining open as Fuel Coolant Interaction. Experiments are needed both in-pile and out of pile: - Depending on the objectives, the out of pile experiments can be conducted - with simulant; - with prototypic corium; - or with irradiated fuel. A new large scale corium facility, FOURNAISE, must be built to fulfill this program. Already, experimental R&D started in existing facilities, such as VITI or CORRONA

Chemical Fingerprinting of Materials Developed Due To Environmental Issues

Science.gov (United States)

Smith, Doris A.; McCool, A. (Technical Monitor)

2000-01-01

This paper presents viewgraphs on chemical fingerprinting of materials developed due to environmental issues. Some of the topics include: 1) Aerospace Materials; 2) Building Blocks of Capabilities; 3) Spectroscopic Techniques; 4) Chromatographic Techniques; 5) Factors that Determine Fingerprinting Approach; and 6) Fingerprinting: Combination of instrumental analysis methods that diagnostically characterize a material.

The issue of safety in the transports of radioactive materials

International Nuclear Information System (INIS)

Pallier, Lucien

1961-01-01

This report addresses and discusses the various hazards associated with transports of radioactive materials, their prevention, intervention measures, and precautions to be taken by rescuers, notably how these issues are addressed in regulations. For each of these issues, this report proposes guidelines, good practices, or procedures to handle the situation. The author first addresses hazards related to a transport of radioactive products: multiplicity of hazards, different hazards due to radioactivity, hazards due to transport modes, scale of dangerous doses. The second part addresses precautionary measures: for road transports, for air transports, for maritime transports, control procedures. The third part addresses the intervention in case of accident: case of a road accident with an unhurt or not vehicle crew, role of the first official rescuers, other kinds of accidents. The fourth part briefly addresses the case of transport of fissile materials. The fifth part discusses the implications of safety measures. Appendices indicate standards, and give guidelines for the construction of a storage building for radioactive products, for the control and storage of parcels containing radioactive products, and for the establishment of instructions for the first aid personnel

Exploring work-related issues on corporate sustainability.

Science.gov (United States)

Brunoro, C M; Bolis, I; Sznelwar, L I

2015-01-01

In a research project about work-related issues and corporate sustainability conducted in Brazil, the goal was to better understand how work-related issues were addressed in the corporate context. Particularly, there are some specific initiatives that serve as guides to organizational decisions, which make their performance indicators for the context of corporate sustainability. 1) To explore the presence of work-related issues and their origins in corporate sustainability approach, analyzing a) corporate disclosures; b) sustainability guidelines that are identified as relevant in corporate disclosures; c) documents that are related to sustainable development and also identified as key-documents for these guidelines and initiatives. 2) To present the activity-centered ergonomics and psychodynamics of work contributions to work-related issues in a corporate sustainability approach. An exploratory study based on multiple sources of evidence that were performed from 2012 to 2013, including interviews with companies that engaged in corporate sustainability and document analysis using the content analysis approach. Work-related issues have been presented since the earliest sustainable development documents. It is feasible to construct an empirical framework for work-related issues and corporate sustainability approaches. 1) Although some authors argue that corporate sustainability has its roots based only on the environmental dimension, there is strong empirical evidence showing that social dimension aspects such as work-related issues have been present since the beginning. 2) Some indicators should be redesigned to more precisely translate the reality of some workplaces, particularly those indicators related to organizational design and mental health.

Communicating with the public on nuclear materials disposition issues

International Nuclear Information System (INIS)

Stevenson, G.B.; Wherley, P.

1995-01-01

The storage and disposition of weapons grade fissile materials involves complex technical issues. The goal of reaching consensus on the best method or methods for storing and ultimately disposing of these materials can only be achieved after an open public discussion of all reasonable alternatives. The US Department of Energy considered a number of factors in developing a program for public involvement. These factors included defining the affected public, public knowledge about the proposed action, decision to be made, availability of pertinent information, current public perceptions, and responding to public input. Based upon an analysis of these factors, three primary techniques were selected for communicating with the public. The techniques are distribution of a quarterly newsletter, establishment of an electronic bulletin board, and holding periodic conference calls and public meetings. The newsletter is designed to reach the widest segment of the public and to be meaningful regardless of the reader's level of familiarity with the project. Periodic conference calls and meeting are used to reach the members of the public who have a real but periodic interest in the issues. The electronic bulletin board is used to communicate with a core group of stakeholders who have a continuing high interest in the total storage and disposition program. Initial indications are that these techniques are effective in reaching a wide segment of the public on highly technical and complex questions related to weapons grade nuclear materials. The effectiveness is not the result of these being new techniques but rather using each technique, to the maximum extent possible, to provide open, on-going, two way communications

State of the art of fusion material recycling and remaining issues

International Nuclear Information System (INIS)

Massaut, V.; Broden, K.; Pace, L. Di; Ooms, L.; Pampin, R.

2006-01-01

Fusion as a power production system presents several advantages in terms of safety and environmental impact, one of these being the limited amount of radioactive waste production which is burden for future generations. Nevertheless, even if fusion does not produce long term radioactive waste, e.g. by adequate material selection for plasma facing components, there are two important aspects deserving consideration: the presence of tritium in relatively large quantity, and the very hard neutron spectrum leading to large amounts of active materials. In order to keep radioactive waste levels to a minimum it has been proposed to recycle the materials removed from the reactor, after adequate decay period and proper handling and treatment. Treatment may include detritiation, separation of different material types and sorting of the non reusable materials, among others. Moreover if recycle or reuse (within the nuclear industry in general or, for some particular materials, within the fusion industry) are foreseen, the material has to be melted or reduced to reusable raw material, machined or the pieces fabricated again, assembled and checked (for geometrical correctness, or leak tightness for instance). And all this has to be made on industrial scale, as fusion will produce large amounts of material presenting various degrees of radioactivity and tritium content. Even if some experience of recycling exists in the nuclear fission industry, which can be used for fusion materials, the different steps mentioned above are challenging operations when dealing with tritiated materials or highly radioactive components. The paper presents a review of the current situation and state-of-the-art recycling methods for typical fusion materials (e.g. Beryllium, Tungsten, Copper and Copper alloys, steel, Carbon) and components of future fusion plants based on current conceptual design studies. It also focuses attention on R-and-D issues to be addressed in order to be able to recycle as much

Materials issues in the design of the ITER first wall, blanket, and divertor

International Nuclear Information System (INIS)

Mattas, R.F.; Smith, D.L.; Wu, C.H.; Shatalov, G.

1992-01-01

During the ITER conceptual design study, a property data base was assembled, the key issues were identified, and a comprehensive R ampersand D plan was formulated to resolve these issues. The desired properties of candidate ITER divertor, first wall, and blanket materials are briefly reviewed, and the major materials issues are presented. Estimates of the influence of materials properties on the performance limits of the first wall, blanket, and divertor are presented

Special Issue: NextGen Materials for 3D Printing

Directory of Open Access Journals (Sweden)

Chee Kai Chua

2018-04-01

Full Text Available Only a handful of materials are well-established in three-dimensional (3D printing and well-accepted in industrial manufacturing applications. However, recent advances in 3D printable materials have shown potential for enabling numerous novel applications in the future. This special issue, consisting of 2 reviews and 10 research articles, intends to explore the possible materials that could define next-generation 3D printing.

Proceedings of the fifth national symposium on environment: focal theme environmental issues related to mining, milling and metallurgy

International Nuclear Information System (INIS)

Sastry, V.N.; Bapat, V.N.; Desai, M.V.M.

1996-02-01

The fifth National Symposium on Environment was held in Calcutta from February 28 to March 1, 1996. It focused on environmental issues related to mining, milling and metallurgy. Some of the topics covered are coal mining and related environmental issues, chromium mining and associated environmental problems, heavy metals especially nuclear materials and the environmental management strategies, arsenic contamination in water in West Bengal areas and radiological issues related to fertilizers and gypsum industries. Papers relevant to INIS are indexed separately. refs., figs., tabs

Materials compatibility and corrosion issues for accelerator transmutation of waste

International Nuclear Information System (INIS)

Staudhammer, K.

1992-08-01

The need to understand the materials issues in an accelerator transmutation of waste (ATW) system is essential. This report focuses on the spallation container material, as this material is exposed to some of the most crucial environmental conditions of simultaneous radiation and corrosion in the system. The most severe design being considered is that of liquid lead. In previous investigations of lead compatibility with materials, the chemistry of the system was derived solely from the corrosion products; however, in an ATW system, the chemistry of the lead changes not only with the derived corrosion products of the material being tested but also with the buildup of the daughter production with time. Daughter production builds up and introduces elements that may have a great effect on the corrosion activity of the liquid lead. Consequently, data on liquid lead compatibility can be regarded only as a guide and must be reevaluated when particular daughter products are added. This report is intended to be a response to specific materials issues and concerns expressed by the ATW design working group and addresses the compatibility/corrosion concerns

Environmental, health and safety issues related to commercializing CuInSe{sub 2}-based photovoltaics

Energy Technology Data Exchange (ETDEWEB)

Eberspacher, C. [UNISUN, Newbury Park, CA (United States); Fthenakis, V.M.; Moskowtiz, P.D. [Brookhaven National Lab., Upton, NY (United States)

1996-07-01

Photovoltaics technology is rapidly evolving towards a new generation of low-cost thin film technologies. One of the most promising materials in this new generation is copper indium selenide (CuInSe{sub 2} or CIS). As with any new material, successful commercialization of CIS photovoltaic (PV) technology will require attention to environmental, health and safety issues, including consideration of the sources, usage, and end-of-product-life disposal and/or recycling of the constituent materials. This work focuses on three specific environmental, health and safety (EH and S) issues related to CIS PV: (1) economics are analyzed to determine their impact on materials use and re-use; (2) Federal and California State environmental disposal and waste handling regulations are analyzed to evaluate their impact on PV module manufacturing and end-of-life module handling; and (3) the logistics and economics of product recycling and waste disposal by industries with comparable EH and S issues are examined to quantify the corresponding options available for handling, disposing of and/or recycling manufacturing by-products and end-of-life modules.

Of Perspectives, Issues, and Politics in Materials Technology

Science.gov (United States)

Promisel, Nathan E.

1985-12-01

Recognizing the pervasive importance of materials science and engineering (MSE) to practically every facet of man’s life, this lecture takes a broad view of the origin and technical trends and achievements in MSE, briefly reviewing its history and relationship to society over many millennia, to the present day, with specific examples. Major emphasis, however, is placed on modern MSE as related to current national issues, using as illustrations of the latter natural resources, industry and the economy, research and development, education, and technology transfer. The discussion of these areas leads to consideration of the role of the Federal Government and the importance of and need for a coherent national policy to deal with critical issues, many of which are listed herein. Some important steps by the Government fostering high level coordination as well as cooperation among government, industry, and academe are cited. Having thus illustrated the pervasive and vital impact of MSE on society, and its current esteemed recognition and position of influence, the lecture concludes that in this period of global change — social, economic, and technological — there is a challenge to MSE to respond beneficially to societal needs more than ever before. The opportunity and mechanisms now exist. Greater participation in the public and political arenas, with mutual education, is indicated.

Recycling of radioactively contaminated materials: Public policy issues

International Nuclear Information System (INIS)

Hocking, E.K.

1994-01-01

Recycling radioactively contaminated materials requires varying degrees of interaction among Federal regulatory agencies such as the Nuclear Regulatory Commission (NRC) and the Environmental Protection Agency (EPA), State governments and regulators, the public, and the Department of Energy. The actions of any of these parties can elicit reactions from the other parties and will raise issues that must be addressed in order to achieve a coherent policy on recycling. The paper discusses potential actions and reactions of Federal regulatory agencies (defined as NRC and EPA), the States, and the Department and the policy issues they raise

Issues related to choosing a guard force structure

International Nuclear Information System (INIS)

Auerback, C.; Cusack, J.; Green, L.; Higinbotham, W.; Indusi, J.; Marcuse, W.; Weinstock, E.

1975-01-01

The establishment of a federal security force has been suggested as an additional step to protect nuclear material. The force would be given the responsibility for guarding nuclear facilities and shipments of nuclear materials. This paper summarizes a study to identify the issues that are relevant to choosing between the private guard forces that are presently employed by industry or a guard force under federal authority. To examine the issues which would be relevant, three possible types of security force structures were selected for comparison: a federal force under central authority, a private guard force employed by or under contract to a facility, and a private arrangement to employ local police officers similar to the arrangement for armed guards at airports. The issues were divided into seven categories: (1) Legal Considerations, (2) Liability, (3) Staffing and Operations, (4) Costs, (5) Relationship to Off-site Forces, (6) Management and Control, (7) Transportation

Direct waste heat recovery via thermoelectric materials - chosen issues of the thermodynamic description

International Nuclear Information System (INIS)

Kolasiński, Piotr; Kolasińska, Ewa

2016-01-01

The effective waste heat recovery is one of the present-day challenges in the industry and power engineering. The energy systems dedicated for waste heat conversion into electricity are usually characterized by low efficiency and are complicated in the design. The possibility of waste heat recovery via thermoelectric materials may be an interesting alternative to the currently used technologies. In particular, due to their material characteristics, conducting polymers may be competitive when compared with the power machinery and equipment. These materials can be used in a wide range of the geometries e.g. the bulk products, thin films, pristine form or composites and the others. In this article, the authors present selected issues related to the mathematical and thermodynamic description of the heat transfer processes in the thermoelectric materials dedicated for the waste heat recovery. The link of these models with electrical properties of the material and a material solution based on a conducting polymer have also been presented in this paper. (paper)

Some political issues related to future special nuclear materials production

International Nuclear Information System (INIS)

Peaslee, A.T. Jr.

1981-08-01

The Federal Government must take action to assure the future adequate supply of special nuclear materials for nuclear weapons. Existing statutes permit the construction of advanced defense production reactors and the reprocessing of commercial spent fuel for the production of special materials. Such actions would not only benefit the US nuclear reactor manufacturers, but also the US electric utilities that use nuclear reactors

Ramón Reichert and Annika Richterich, eds., Digital Material/ism Vol. 1, Issue 1 – Digital Culture and Society

OpenAIRE

Pournara, Lizzy

2017-01-01

Ramón Reichert and Annika Richterich, eds., Digital Material/ism Vol. 1, Issue 1 – Digital Culture and Society Bielefeld: [transcript] Verlag, 2015. ISBN 978-3-8376-3153-1. Lizzy Pournara Aristotle University of Thessaloniki The issue Digital Material/ism edited by Ramón Reichert and Annika Richterich inaugurates the first volume of the journal Digital Culture & Society. The significance of this volume’s work lies in its attempt to redress the concept of materiality in digital environments an...

Safeguards and security issues for the disposition of fissile materials

International Nuclear Information System (INIS)

Jaeger, C.D.; Moya, R.W.; Duggan, R.A.; Mangan, D.L.; Tolk, K.M.; Rutherford, D.; Fearey, B.; Moore, L.

1995-01-01

The Department of Energy's Office of Fissile Material Disposition (FMD) is analyzing long-term storage and disposition options for surplus weapons-usable fissile materials, preparing a programmatic environmental impact statement (PEIS), preparing for a record of decision (ROD) regarding this material and conducting other activities. The primary security objectives of this program are to reduce major security risks and strengthen arms reduction and nonproliferation (NP). To help achieve these objectives, a safeguards and security (S ampersand S) team consisting of participants from Sandia, Los Alamos, and Lawrence Livermore National Laboratories was established. The S ampersand S activity for this program is a cross-cutting task which addresses all of the FMD program options. It includes both domestic and international safeguards and includes areas such as physical protection, nuclear materials accountability and material containment and surveillance. This paper will discuss the activities of the Fissile Materials Disposition Program (FMDP) S ampersand S team as well as some specific S ampersand S issues associated with various FMDP options/facilities. Some of the items to be discussed include the threat, S ampersand S requirements, S ampersand S criteria for assessing risk, S ampersand S issues concerning fissile material processing/facilities, and international and domestic safeguards

Issues related to choosing a guard force structure

International Nuclear Information System (INIS)

Averbach, C.; Cusack, J.; Green, L.; Higinbotham, W.; Indusi, J.; Marcuse, W.; Weinstock, E.

1975-01-01

The establishment of a federal security force has been suggested as an additional step to protect nuclear material. The force would be given the responsibility for guarding nuclear facilities and shipments of nuclear materials. A study to identify the issues that are relevant to choosing between the private guard forces that are presently employed by industry or a guard force under federal authority is summarized. To examine the issues which would be relevant, three possible types of security force structures were selected for comparison: a federal force under central authority, a private guard force employed by or under contract to a facility, and a private arrangement to employ local police officers similar to the arrangement for armed guards at airports. The issues were divided into seven categories: (1) legal considerations, (2) liability, (3) staffing and operations, (4) costs, (5) relationship to off-site forces, (6) management and control, and (7) transportation. (U.S.)

Issues Associated with Tritium Legacy Materials

International Nuclear Information System (INIS)

Mills, Michael

2008-01-01

This paper highlights some of the issues associated with the treatment of legacy materials linked to research into tritium over many years and also of materials used to contain or store tritium. The aim of the work is to recover tritium where practicable, and to leave the residual materials passively safe, either for disposal or for continued storage. A number of materials are currently stored at AWE which either contain tritium or have been used in tritium processing. It is essential that these materials are characterised such that a strategy may be developed for their safe stewardship, and ultimately for their treatment and disposal. Treatment processes for such materials are determined by the application of best practicable means (BPM) studies in accordance with the requirements of the Environment Agency of England and Wales. Clearly, it is necessary to understand the objectives of legacy material treatment / processing and the technical options available before a definitive BPM study is implemented. The majority of tritium legacy materials with which we are concerned originate from the decommissioning of a facility that was operational from the late 1950's through to the late 1990's when, on post-operative clear-out (POCO), the entire removable and transportable tritium inventory was moved to new, purpose built facilities. One of the principle tasks to be undertaken in the new facilities is the treatment of the legacy materials to recover tritium wherever practicable, and render the residual materials passively safe for disposal or continued storage. Where tritium recovery was not reasonably or technically feasible, then a means to assure continued safe storage was to be devised and implemented. The legacy materials are in the following forms: - Uranium beds which may or may not contain adsorbed tritium gas; - Tritium gas stored in containers; - Tritide targets for neutron generation; - Tritides of a broad spectrum of metals manufactured for research / long

Some issues on environmental impact report of radioactive material transport

International Nuclear Information System (INIS)

Wang Jiaming

2001-01-01

The author puts forward some issues which should be paid attention to when compiling a environmental impact report of radioactive material transport. The main issues discussed are as follows: (1) Optimization analysis for transport routes. (2) Source terms under accident conditions in transport. (3) Precautions against accidents and emergency preparedness. (4) Quality assurance of transport, etc

Comparison of shrinkage related properties of various patch repair materials

Science.gov (United States)

Kristiawan, S. A.; Fitrianto, R. S.

2017-02-01

A patch repair material has been developed in the form of unsaturated polyester resin (UPR)-mortar. The performance and durability of this material are governed by its compatibility with the concrete being repaired. One of the compatibility issue that should be tackled is the dimensional compatibility as a result of differential shrinkage between the repair material and the concrete substrate. This research aims to evaluate such shrinkage related properties of UPR-mortar and to compare with those of other patch repair materials. The investigation includes the following aspects: free shrinkage, resistance to delamination and cracking. The results indicate that UPR-mortar poses a lower free shrinkage, lower risk of both delamination and cracking tendency in comparison to other repair materials.

40 CFR 300.220 - Related Title III issues.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 27 2010-07-01 2010-07-01 false Related Title III issues. 300.220 Section 300.220 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SUPERFUND, EMERGENCY... PLAN Planning and Preparedness § 300.220 Related Title III issues. Other related Title III requirements...

Research study on highly functional carbon related materials; Tansokei kokino zairyo no chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The study results on highly functional carbon related materials are reported as a part of the leading research in fiscal 1996. Synthesis of these novel materials is outlined, and R & D results on the following materials are described: diamond, hetero-diamond, graphite, amorphous carbon, carbyne, fullerences, carbon nitride and chemically modified carbon materials. Their issues, future possibility and market in 2010 are also described. The markets are predicted of such electronic materials as electronic emitter, sensor, solid device and heat sink, such optical materials as X-ray lithography, and such chemical materials as electrode and catalyst. Promising characteristics of light-weight and high-hardness machine materials are presented, and some issues such as material synthesis, and intensive machining and application technologies are described. The future markets are predicted of their applications to tools, dies, information equipment, glass, automobiles, aircraft, spacecraft and industrial machines. Problems and their break through techniques of these novel materials are also presented. 220 refs., 68 figs., 16 tabs.

[Preface for special issue on bio-based materials (2016)].

Science.gov (United States)

Weng, Yunxuan

2016-06-25

Bio-based materials are new materials or chemicals with renewable biomass as raw materials such as grain, legume, straw, bamboo and wood powder. This class of materials includes bio-based polymer, biobased fiber, glycotechnology products, biobased rubber and plastics produced by biomass thermoplastic processing and basic biobased chemicals, for instance, bio-alcohols, organic acids, alkanes, and alkenes, obtained by bio-synthesis, bio-processing and bio-refinery. Owing to its environmental friendly and resource conservation, bio-based materials are becoming a new dominant industry taking the lead in the world scientific and technological innovation and economic development. An overview of bio-based materials development is reported in this special issue, and the industrial status and research progress of the following aspects, including biobased fiber, polyhydroxyalkanoates, biodegradable mulching film, bio-based polyamide, protein based biomedical materials, bio-based polyurethane, and modification and processing of poly(lactic acid), are introduced.

Potential SSP Perfluorooctanoic Acid Related Fluoropolymer Materials Obsolescence

Science.gov (United States)

Segars, Matt G.

2006-01-01

The Shuttle Environmental Assurance Initiative (SEA) has identified a potential for the Space Shuttle Program (SSP) to incur materials obsolescence issues due to agreements between the fluoro-chemical industry and the United States Environmental Protection Agency (USEPA) to participate in a Global Stewardship Program for perfluorooctanoic acid (PFOA). This presentation will include discussions of the chemistry, regulatory drivers, affected types of fluoropolymer and fluoroelastomer products, timeline for reformulations, and methodology for addressing the issue. It will cover the coordination of assessment efforts with the International Space Station and Head Quarters Air Force Space Command, along with some examples of impacted materials. The presentation is directed at all members of the international aerospace community concerned with identifying potential environmentally driven materials obsolescence issues.

Issues related to geothermal development

International Nuclear Information System (INIS)

Lesperance, G.O.

1990-01-01

This paper reports on a number of potential barriers to geothermal development in Hawaii which have been overcome but some remain. Efforts continue to address issues relating to transmission, project economics, the regulatory process, resource verification, and public acceptance

Atmospheric Weathering of Historic Monuments and Their Related Conservation Issues

Directory of Open Access Journals (Sweden)

Caner-Saltık Emine N.

2018-01-01

Full Text Available Atmospheric environment affects the materials of historic monuments and their structure starting from the time of their construction. Daily and seasonal changes in temperature and humidity, wind, snow and rainfall, soluble salts carried by water, biological agents, pollutant gases and particulate matter are some of the agents in atmospheric environment that introduce weathering by physical, chemical and biological processes in the materials of the monuments such as natural building stones, bricks, mortars and plasters, mud brick etc. The weathering processes need to be well diagnosed by identification of main mechanisms of decay and major responsible agents, degree and depth of deterioration expressed with measurable parameters of physical, physicomechanical properties, and micro structural changes together with their distribution on the monument. Success of conservation treatments strongly depend on those diagnostic studies and compatibility of the treatments with the deteriorated and relatively sound parts of the historic materials. Current approach to materials conservation is to be able to make minimum intervention to historic material by targeting the conservation treatment to the deteriorated area for the purpose of controlling the deterioration factors and achieving compatible and durable conservation of historical material. In this presentation, two examples of diagnostic research and conservation treatments based on and guided by the diagnostic results are summarized concerning historic stone monuments exposed to atmospheric environment since more than two thousand years. The first example is on the marble walls of Temple of Augustus in Ankara exposed to polluted urban atmosphere. The second example is on the limestone statues of Nemrut Mount Monument in Adıyaman-Turkey, exposed to rural atmosphere with harsh climatic conditions. Finally, a brief discussion on current research issues related to historic materials conservation in

Electrolyte materials - Issues and challenges

International Nuclear Information System (INIS)

Balbuena, Perla B.

2014-01-01

Electrolytes are vital components of an electrochemical energy storage device. They are usually composed of a solvent or mixture of solvents and a salt or a mixture of salts which provide the appropriate environment for ionic conduction. One of the main issues associated with the selection of a proper electrolyte is that its electronic properties have to be such that allow a wide electrochemical window - defined as the voltage range in which the electrolyte is not oxidized or reduced - suitable to the battery operating voltage. In addition, electrolytes must have high ionic conductivity and negligible electronic conductivity, be chemically stable with respect to the other battery components, have low flammability, and low cost. Weak stability of the electrolyte against oxidation or reduction leads to the formation of a solid-electrolyte interphase (SEI) layer at the surface of the cathode and anode respectively. Depending on the materials of the electrolyte and those of the electrode, the SEI layer may be composed by combinations of organic and inorganic species, and it may exert a passivating role. In this paper we discuss the current status of knowledge about electrolyte materials, including non-aqueous liquids, ionic liquids, solid ceramic and polymer electrolytes. We also review the basic knowledge about the SEI layer formation, and challenges for a rational design of stable electrolytes

Special cluster issue on tribocorrosion of dental materials

Science.gov (United States)

Mathew, Mathew T.; Stack, Margaret M.

2013-10-01

Tribocorrosion affects all walks of life from oil and gas conversion to biomedical materials. Wear can interact with corrosion to enhance it or impede it; conversely, corrosion can enhance or impede wear. The understanding of the interactions between physical and chemical phenomena has been greatly assisted by electrochemical and microscopic techniques. In dentistry, it is well recognized that erosion due to dissolution (a term physicists use to denote wear) of enamel can result in tooth decay; however, the effects of the oral environment, i.e. pH levels, electrochemical potential and any interactions due to the forces involved in chewing are not well understood. This special cluster issue includes investigations on the fundamentals of wear-corrosion interactions involved in simulated oral environments, including candidate dental implant and veneer materials. The issue commences with a fundamental study of titanium implants and this is followed by an analysis of the behaviour of commonly used temporomandibular devices in a synovial fluid-like environment. The analysis of tribocorrosion mechanisms of Ti6Al4V biomedical alloys in artificial saliva with different pHs is addressed and is followed by a paper on fretting wear, on hydroxyapatite-titanium composites in simulated body fluid, supplemented with protein (bovine serum albumin). The effects of acid treatments on tooth enamel, and as a surface engineering technique for dental implants, are investigated in two further contributions. An analysis of the physiological parameters of intraoral wear is addressed; this is followed by a study of candidate dental materials in common beverages such as tea and coffee with varying acidity and viscosity and the use of wear maps to identify the safety zones for prediction of material degradation in such conditions. Hence, the special cluster issue consists of a range of tribocorrosion contributions involving many aspects of dental tribocorrosion, from analysis of physiological

Materials issues in art and archaeology. 2

International Nuclear Information System (INIS)

Vandiver, P.B.; Druzik, J.; Wheeler, G.S.

1991-01-01

the purpose of this meeting is to present new and current research which: shares an empirical methodology of observation and measurement; concerns interdisciplinary studies of art, archaeology, architecture, ancient technology, and conservation; and uses the knowledge, methods and tools of materials science and engineering. Druzik introduced the symposium as follows: It is not inaccurate to say that Materials Issues in Art and Archaeology II is a continuing experiment. It is an experiment in the sense that conservation scientists, materials scientists who usually deal with the properties and processing of modern technology, and those who study the materials and processing of ancient cultures seldom have an opportunity to experience each other's unique problems. While the conservation of artistic and cultural properties often involves the very same objects as those studied by students of ancient technology these two specialized species seldom, if ever, attend the same meetings, publish in the same journals, or can even name a paltry subset of the other discipline's more famous characters and controversies. And, what do the Real Material Scientists think of these two odd birds. Well, that's what we really want to find out. Because it's certainly clear to myself and my co-organizers that the MRS has undreamed of potential and wealth to help solve many of the questions we pose about past cultures, their tools, their aesthetic sensibilities and their preservation for future generations were we only imaginative enough to exploit it

Communication Received from the PermanentMission of Mexico to the International Atomic Energy Agency Regarding Guidelines for the Export of Nuclear Material, Equipment and Technology and the Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-06-19

The Director General has received a note verbale dated 15 June 2012 from the Permanent Mission of Mexico to the International Atomic Energy Agency providing information on the decision of the Government of Mexico to act in accordance with the 'Guidelines for the Export of Nuclear Material, Equipment and Technology', issued as document INFCIRC/254/Rev.10/Part 1, including its Annexes, and with the 'Guidelines for Transfers of Nuclear-Related Dual-Use Equipment, Material, Software and Related Technology', issued as document INFCIRC/254/Rev.8/Part 2.

Communication Received from the Permanent Mission of Mexico to the International Atomic Energy Agency Regarding Guidelines for the Export of Nuclear Material, Equipment and Technology and the Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-06-19

The Director General has received a note verbale dated 15 June 2012 from the Permanent Mission of Mexico to the International Atomic Energy Agency providing information on the decision of the Government of Mexico to act in accordance with the 'Guidelines for the Export of Nuclear Material, Equipment and Technology', issued as document INFCIRC/254/Rev.10/Part 1, including its Annexes, and with the 'Guidelines for Transfers of Nuclear-Related Dual-Use Equipment, Material, Software and Related Technology', issued as document INFCIRC/254/Rev.8/Part 2.

Communication Received from the Permanent Mission of Mexico to the International Atomic Energy Agency Regarding Guidelines for the Export of Nuclear Material, Equipment and Technology and the Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology

International Nuclear Information System (INIS)

2012-01-01

The Director General has received a note verbale dated 15 June 2012 from the Permanent Mission of Mexico to the International Atomic Energy Agency providing information on the decision of the Government of Mexico to act in accordance with the 'Guidelines for the Export of Nuclear Material, Equipment and Technology', issued as document INFCIRC/254/Rev.10/Part 1, including its Annexes, and with the 'Guidelines for Transfers of Nuclear-Related Dual-Use Equipment, Material, Software and Related Technology', issued as document INFCIRC/254/Rev.8/Part 2

Communication Received from the PermanentMission of Mexico to the International Atomic Energy Agency Regarding Guidelines for the Export of Nuclear Material, Equipment and Technology and the Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology

International Nuclear Information System (INIS)

2012-01-01

The Director General has received a note verbale dated 15 June 2012 from the Permanent Mission of Mexico to the International Atomic Energy Agency providing information on the decision of the Government of Mexico to act in accordance with the 'Guidelines for the Export of Nuclear Material, Equipment and Technology', issued as document INFCIRC/254/Rev.10/Part 1, including its Annexes, and with the 'Guidelines for Transfers of Nuclear-Related Dual-Use Equipment, Material, Software and Related Technology', issued as document INFCIRC/254/Rev.8/Part 2

Japan's regulatory and safety issues regarding nuclear materials transport

International Nuclear Information System (INIS)

Saito, T.; Yamanaka, T.

2004-01-01

This paper focuses on the regulatory and safety issues on nuclear materials transport which the Government of Japan (GOJ) faces and needs to well handle. Background information about the status of nuclear power plants (NPP) and nuclear fuel cycle (NFC) facilities in Japan will promote a better understanding of what this paper addresses

Environmental Issues in the Didactic Materials in Schools in Republic of Serbia

Science.gov (United States)

Maravic, Milutin; Ivkovic, Sonja; Segedinac, Mirjana; Adamov, Jasna

2014-01-01

The main task of the examination is to establish environmental issues in the didactic materials for primary and secondary school in Republic of Serbia. Environmental issues in the secondary school curriculum in Serbia, according to the current educational curricula and educational programs, is limited to general subjects (chemistry and biology…

The difficult issue of age assessment on pedo-pornographic material.

Science.gov (United States)

Cattaneo, Cristina; Ritz-Timme, Stefanie; Gabriel, Peter; Gibelli, Daniele; Giudici, Elena; Poppa, Pasquale; Nohrden, Doerte; Assmann, Sabine; Schmitt, Roland; Grandi, Marco

2009-01-10

The issue of juvenile pornography has seen an increase in the past few years of the number of expert opinions requested to forensic pathologists, paediatricians and other various experts within the forensic and medical fields concerning the age of represented individuals. Regardless of the entity of the problem, no actual method exists which can allow us to give an objective and scientific answer, particularly in the postpubertal stage. Using parameters related to sexual maturation can be very dangerous. Nonetheless some experts still insist with similar types of "expertises". This study aims at verifying the ability of different experts in assessing age of postpubertal individuals represented in pornographic material. Results underline the difficulties and major uncertainties of age evaluation by visual observation of photographic material particularly when the subjects have reached the sexual maturation stage - and therefore in verifying whether the individual is above or below 18 years of age (an important age limit for most European countries as far as this type of crime is concerned). Furthermore the study stresses the need both to search for an alternate approach and to apply extreme caution in judicial evaluation.

Breeding blanket design for ITER and prototype (DEMO) fusion reactors and breeding materials issues

Energy Technology Data Exchange (ETDEWEB)

Takatsu, H; Enoeda, M [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment

1998-03-01

Current status of the designs of the ITER breeding blanket and DEMO blankets is introduced placing emphasis on the breeding materials selection and related issues. The former design is based on the up-to-date design activities, as of October 1997, being performed jointly by Joint Central Team (JCT) and Home Teams (HT`s), while the latter is based on the DEMO blanket test module designs being proposed by each Party at the TBWG (Test Blanket Working Group) meetings. (J.P.N.)

Cancer survivors. Work related issues.

Science.gov (United States)

Schultz, Pamela N; Beck, Martha L; Stava, Charles; Sellin, Rena V

2002-05-01

New and more effective treatments for cancer have resulted in individuals living longer with a better quality of life. Many more survivors are employed in the workplace. Cancer is no longer only an issue for survivors and their families; it has become an issue for the employer and the workplace. This article describes survey results of 4,364 long term cancer survivors in which they were asked to respond to items describing their ability to work, job discrimination, and quality of life. Thirty-five percent of survivors were working at the time they completed the survey, and 8.5% considered themselves unable to work. This research has shown that age, gender, ethnic group, and cancer type affected the working status of the survivors. Of survivors continuing to work, 7.3% indicated they had experienced job discrimination. The results indicate most cancer survivors do not perceive employment related problems, and are readily assimilated into the work force. Job discrimination and the ability to work is a quality of life issue.

Issues related to field testing in tuff

International Nuclear Information System (INIS)

Zimmerman, R.M.

1982-01-01

This paper has brought out the unique properties of tuffs and related them to needs associated with their use as a host rock for a high level nuclear waste repository. Major issues of temperature, pore water, joints, and depositional patterns have been identified and related responses and impacts outlined in Table 1. Planned experiments have been outlined and their relationships to the rock mechanics issues summarized in Table 2. The conclusions from this paper are: (1) tuff is a complex rock and basic phenomenological understanding is incomplete; and (2) available field test facilities will be used for a series of experiments designed to improve phenomenological understanding and support repository design efforts

Communication Received from the Permanent Mission of the Republic of Serbia to the International Atomic Energy Agency Regarding Guidelines for the Export of Nuclear Material, Equipment and Technology and the Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology

International Nuclear Information System (INIS)

2012-01-01

The Director General has received a note verbale dated 28 September 2012 from the Permanent Mission of Serbia to the International Atomic Energy Agency providing information on the decision of the Government of Serbia to adhere to the 'Guidelines for the Export of Nuclear Material, Equipment and Technology', issued as document INFCIRC/254/Rev.10/Part 1, including its Annexes, and with the 'Guidelines for Transfers of Nuclear-Related Dual-Use Equipment, Material, Software and Related Technology', issued as document INFCIRC/254/Rev.8/Part 2 [es

Communication Received from the Permanent Mission of the Republic of Serbia to the International Atomic Energy Agency Regarding Guidelines for the Export of Nuclear Material, Equipment and Technology and the Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology

International Nuclear Information System (INIS)

2012-01-01

The Director General has received a note verbale dated 28 September 2012 from the Permanent Mission of Serbia to the International Atomic Energy Agency providing information on the decision of the Government of Serbia to adhere to the 'Guidelines for the Export of Nuclear Material, Equipment and Technology', issued as document INFCIRC/254/Rev.10/Part 1, including its Annexes, and with the 'Guidelines for Transfers of Nuclear-Related Dual-Use Equipment, Material, Software and Related Technology', issued as document INFCIRC/254/Rev.8/Part 2 [fr

Communication Received from the Permanent Mission of the Republic of Serbia to the International Atomic Energy Agency Regarding Guidelines for the Export of Nuclear Material, Equipment and Technology and the Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology

International Nuclear Information System (INIS)

2012-01-01

The Director General has received a note verbale dated 28 September 2012 from the Permanent Mission of Serbia to the International Atomic Energy Agency providing information on the decision of the Government of Serbia to adhere to the 'Guidelines for the Export of Nuclear Material, Equipment and Technology', issued as document INFCIRC/254/Rev.10/Part 1, including its Annexes, and with the 'Guidelines for Transfers of Nuclear-Related Dual-Use Equipment, Material, Software and Related Technology', issued as document INFCIRC/254/Rev.8/Part 2

Implementation of a study material for economic culture from cooperative education issues

Directory of Open Access Journals (Sweden)

Ariel Gámez Iglesias

2017-12-01

Full Text Available As part of the process of updating the Cuban economic model, our country has decided to articulate a serie of transformations directed, among other issues, to the strengthening of the cooperative sector, therefore forming human capital with knowledge and skills for this achievement is a challenge that has today higher education, therefore contributing to the learning of the contents related to cooperatives and its transformations in Cuba from the Agricultural Economics subject in the Degree in Education. Economy that is developed in the Faculty of Economic and Business Sciences of the University of Pinar del Río is a priority to respond to this challenge. In this sense, the main objective of the research is to develop a support material to contribute to the economic culture from the issues of cooperative education in the third year students of this career. The experience was applied in the educational practice with satisfactory results, in addition it was submitted to the criterion of the specialists and they consider it is viable.

Heat resistant materials and their feasibility issues for a space nuclear transportation system

International Nuclear Information System (INIS)

Olsen, C.S.

1991-01-01

A number of nuclear propulsion concepts based on solid-core nuclear propulsion are being evaluated for a nuclear propulsion transportation system to support the Space Exploration Initiative (SEI) involving the reestablishment of a manned lunar base and the subsequent exploration of Mars. These systems will require high-temperature materials to meet the operating conditions with appropriate reliability and safety built into these systems through the selection and testing of appropriate materials. The application of materials for nuclear thermal propulsion (NTP) and nuclear electric propulsion (NEP) systems and the feasibility issues identified for their use will be discussed. Some mechanical property measurements have been obtained, and compatibility tests were conducted to help identify feasibility issues. 3 refs., 1 fig., 4 tabs

Research status and issues of tungsten plasma facing materials for ITER and beyond

International Nuclear Information System (INIS)

Ueda, Y.; Coenen, J.W.; De Temmerman, G.; Doerner, R.P.; Linke, J.; Philipps, V.; Tsitrone, E.

2014-01-01

This review summarizes surface morphology changes of tungsten caused by heat and particle loadings from edge plasmas, and their effects on enhanced erosion and material lifetime in ITER and beyond. Pulsed heat loadings by transients (disruption and ELM) are the largest concerns due to surface melting, cracking, and dust formation. Hydrogen induced blistering is unlikely to be an issue of ITER. Helium bombardment would cause surface morphology changes such as W fuzz, He holes, and nanometric bubble layers, which could lead to enhanced erosion (e.g. unipolar arcing of W fuzz). Particle loadings could enhance pulsed heat effects (cracking and erosion) due to surface layer embrittlement by nanometric bubbles and solute atoms. But pulsed heat loadings alleviate surfaces morphology changes in some cases (He holes by ELM-like heat pulses). Effects of extremely high fluence (∼10 30 m −2 ), mixed materials, and neutron irradiation are important issues to be pursued for ITER and beyond. In addition, surface refurbishment to prolong material lifetime is also an important issue

Clean Energy Industries and rare Earth Materials: Economic and Financial Issues

OpenAIRE

Baldi, Lucia; Peri, Massimo; Vandone, Daniela

2013-01-01

In the last few years Rare Earth Materials (REMs) prices have experienced a strong increase, due to geopolitical policies and sustainability issues. Provided that these materials at risk of supply disruptions are largely employed in the development of new technologies - such as clean energy industries - financial markets may already have included these concerns into clean energy companies evaluation. We use a multifactor market model for the period January 2006-September 2012 to analyse the i...

Alternative approaches of SiC & related wide bandgap materials in light emitting & solar cell applications

Science.gov (United States)

Wellmann, Peter; Syväjärvi, Mikael; Ou, Haiyan

2014-03-01

silicon oxycarbide material can provide potential applications of the Eu luminescent materials to challenging conditions like high temperatures or aggressive environments where the silica has weaknesses. In some approaches, silicon rich silicon oxide that contain silicon nanoclusters emit red to near infrared luminescence due to quantum confinement effects while luminescence at shorter wavelength is difficult due to the interplay of defects and quantum confinement effects. In addition it is applicable as low-k dielectric, etch-stop and passivation layers. It also has an optical band-gap that is smaller than that of SiO2 which may facilitate carrier injection at lower voltages that is suitable for optoelectronics. From materials perspective of emerging materials, it seems distant to consider system related issues. The future demands on communication and lighting devices require higher information flows in modernized optical devices, for example by replacing electrical interconnects with their optical counterparts and tunable backgrounds filters for integrated optics or photonics applications. However, there are materials issues related to such device performance, for example by a non-linearity, that provide the possibility for selective removal or addition of wavelengths using hetero structures in which one side of the structure enhances the light-to-dark sensitivity of long and medium wavelength channels and diminish others, and an opposite behavior in other face of the structure. Certainly materials may be applied in various innovative ways to provide new performances in devices and systems. In any materials and device evaluation, reliability issues in passivation and packaging of semiconductor device structures provide a base knowledge that may be used to evaluate new concepts. Fundamental aspects of dielectric constant, bandgap and band offsets between the valence and conduction band edges between the passivation layer and the semiconductor create a foundation for

Emergency communication and information issues in terrorist events involving radioactive materials.

Science.gov (United States)

Becker, Steven M

2004-01-01

With the threat posed by terrorism involving radioactive materials now high on the nation's agenda, local, state, and federal agencies are moving to enhance preparedness and response capabilities. Crucial to these efforts is the development of effective risk communication strategies. This article reports findings from an ongoing study of risk communication issues in nuclear/radiological terrorism situations. It is part of a larger CDC-funded effort that aims to better understand communication challenges associated with weapons of mass destruction terrorism incidents. Presented here are formative research findings from 16 focus groups (n = 163) in which a multi-part, hypothetical radioactive materials terrorism situation was discussed. Twelve of the focus groups were carried out with members of the general public (drawn from a variety of ethnic backgrounds and geographic locations), and four groups were composed of first responders, hospital emergency department personnel, and public health professionals. One aim of the focus groups was to elicit detailed information on people's knowledge, views, perceptions, reactions, and concerns related to a nuclear/radiological terrorism event, and to better understand people's specific information needs and preferred information sources. A second aim was to pretest draft informational materials prepared by CDC and NIOSH. Key findings for the public and professional groups are presented, and the implications of the research for developing messages in radiological/nuclear terrorism situations are explored.

Gender relations and economic issues.

Science.gov (United States)

Elson, D

1993-10-01

While most discussions of economic issues pay no explicit attention to gender relations, most economic policy is marked by male bias which provides women with an unequal access to resources. This situation exists because most economists, officials, and business managers lack the imagination to see the gender impact of economic issues and most women's groups and researchers lack the language to portray this connection. This article explores some aspects of this gap and aims to provide women with the ability to effectively discuss economic issues. After an introduction, the article considers the basic problem caused by the fact that the economy is defined primarily in terms of money-making activities. This leads to a male bias since much of women's work occurs outside of the monetary sphere. The next section looks at how a failure to understand the significance of gender relations will interfere with the fulfillment of policy objectives. This discussion is followed by a description of how cutbacks in government expenditures increase the burden on women who must replace the services. Problems with the option of the private-sector replacing government services, such as the fact that increasing disposable income in households does not guarantee that unpaid labor will be reduced and the fact that the private sector may fail to expand in a productive way, are covered. The article then touches on the new emphasis placed by some economists and policy makers on cooperative and interactive solutions to these problems and ends by mentioning three new initiatives which seek to build capacity for gender-aware economic analysis: the development of a training program at Manchester University in the UK, coordination of an international research workshop by the University of Utah in the US, and development of an international association for feminist economics based in the US.

Ethical issues in trauma-related research: a review.

Science.gov (United States)

Newman, Elana; Risch, Elizabeth; Kassam-Adams, Nancy

2006-09-01

ETHICAL DECISION-MAKING ABOUT TRAUMA-RELATED STUDIES requires a flexible approach that counters assumptions and biases about victims, assures a favorable ethical cost-benefit ratio, and promotes advancement of knowledge that can benefit survivors of traumatic stress. This paper reviews several ethical issues in the field of traumatic stress: benefit and risks in trauma-related research, whether trauma-related research poses unique risks and if so what those might be, informed consent and mandatory reporting, and supervision of trauma-related research. For each topic, we review potential ethical issues, summarize the research conducted thus far to inform ethical practice, and recommend future practice, research questions and policies to advance the field so that research on trauma can continue to be a win-win situation for all stakeholders in the research enterprise.

Special issue on "Frontiers in Materials Science: Condensed matters"

Science.gov (United States)

Hoang, Nam-Nhat; Yamamoto, Tomoyuki; Pham, Duc-Thang

2018-03-01

This special issue includes the editor-invited and selected papers from 3rd International Symposium on Frontiers in Materials Science (FMS2016), held in Hanoi, Vietnam, from the 28th to 30th of September 2016, which coincided with the 65th anniversary of the Faculty of Physics, Hanoi University of Education. The FMS2016 is a continuation of a series of meetings starting from 2010. A first event was a bilateral Vietnamese-German meeting in Hanoi, Vietnam, in 2010, and the second one was held in Frankfurt, Germany, in 2011. The idea at that time was to initiate interactions between scientists from both countries and to further develop the field of materials science in Southeast Asia. After these successful bilateral meetings, a next step was taken by advancing the format of the symposium into an international event. In 2013, the 1st International Symposium on Frontiers in Materials Science (FMS2013) was successfully organized in Hanoi, which followed 2nd symposium, FMS2015, in Tokyo, in 2015. The FMS2016 continues this idea of providing an international forum for physicists, material scientists and chemists for discussing their latest results and the recent developments in the important field of materials science.

Public Relations Manager Involvement in Strategic Issue Diagnosis.

Science.gov (United States)

Lauzen, Martha M.

1995-01-01

Reports on an exploratory study that seeks to build theoretical understanding of how public relations practitioner involvement in one type of strategic organizational decision making--strategic issue diagnosis--is related to shared values with top management, diagnosis accuracy, strategy pursued, and the power of the public relations function. (TB)

32 CFR 536.35 - Unique issues related to environmental claims.

Science.gov (United States)

2010-07-01

... 32 National Defense 3 2010-07-01 2010-07-01 true Unique issues related to environmental claims... issues related to environmental claims. Claims for property damage, personal injury, or death arising in... reported by USARCS to the Environmental Law Division of the Army Litigation Center and the Environmental...

Trade-related Electronic Commerce Issues in the OECD

Directory of Open Access Journals (Sweden)

Chang-In Yoon

1998-12-01

Full Text Available The trade committee of Organization for Economic Cooperation and Development (OECD has begun the study of the trade related to electronic commerce since 1997. The scale of the study on one hand has avoided the fact of copy and duplication of WTO and its organizational principles, on the other hand it has played a supplementary and supportive function. At present, digital-related product, such as computers, software and travel is the key point to the trade which resorts to electronic commerce. It is predicted that this trend will go on. The study on electronic commerce could be summed up into three main components: First, according to the phase of the trade, it could be divided into advertisement, purchase, delivery and payment. Second, issues on electronic commerce in the international trade; such as the issue that leads to the unfairness and non-neutrality of the searching engine in international service trade. Besides, domain name, trademarks and the issue of middleman which exist at the moment in the electronic commerce are activated and will also be discussed. Third, issues of the trade policy related to the electronic commerce. For instance, the kernel principles which support the multi-trade regulation, including transparency, indiscrimination, anti-dumping, flexible trade, government arrangement, tariff and competition policy and so on. Under this background, we should explore way in formulating hypotheses with preconceived issues, validating the electronic commerce trade on the spot, actualizing the study on the application of electronic commerce coming with the GATS regulation, seeking the countermeasure in the future trade policy, such as benefit policy to the electronic commerce department and electronic commerce strategy approach of certain enterprises, etc.

Decommissioning and material recycling. Radiation risk management issues

International Nuclear Information System (INIS)

Dodd, D.H.

1996-09-01

Once nuclear fuel cycle facilities have permanently stopped operations they have to be decommissioned. The decommissioning of a nuclear facility involves the surveillance and dismantling of the facility systems and buildings, the management of the materials resulting from the dismantling activities and the release of the site for further use. The management of radiation risks associated with these activities plays an important role in the decommissioning process. Existing legislation covers many aspects of the decommissioning process. However, in most countries with nuclear power programmes legislation with respect to decommissioning is incomplete. In particular this is true in the Netherlands, where government policy with respect to decommissioning is still in development. Therefore a study was performed to obtain an overview of the radiation risk management issues associated with decommissioning and the status of the relevant legislation. This report describes the results of that study. It is concluded that future work at the Netherlands Energy Research Foundation on decommissioning and radiation risk management issues should concentrate on surveillance and dismantling activities and on criteria for site release. (orig.)

Supporting Infrastructure and Acceptability Issues for Materials Used in New Generation Vehicles

Energy Technology Data Exchange (ETDEWEB)

Das, S.; Curlee, T.R.; Jones, D.W.; Leiby, P.E.; Rubin, J.D.; Schexnayder, S.M.; Vogt, D.P.; Wolfe, A.K.

1999-03-01

To achieve its goal of producing vehicles that use two thirds less fuel than current vehicles, the Partnership of a New Generation of Vehicles (PNGV) is designing vehicles that will use lightweight materials in place of heavier materials used in current vehicles. using new materials in automobiles will require the development of a supporting infrastructure to produce both the substitute materials and the components of the substitute materials, as well as the automotive parts constructed from the new materials. This report documents a set of analyses that attempt to identify potential barriers--economic, infrastructure, and public acceptance barriers--to the materials substitution in New Generation Vehicles. The analyses rely on hypothetical vehicle market penetration scenarios and material composition. The approach is comprehensive, examining issues ranging from materials availability to their eventual disposition and its effect on the automobile recycling industry, and from supporting industries' capacity to the public acceptability of these vehicles. The analyses focus on two likely substitute materials, aluminum and glass-reinforced polymer composites.

Comparative Issues of Cathode Materials for Li-Ion Batteries

Directory of Open Access Journals (Sweden)

Christian M. Julien

2014-03-01

Full Text Available After an introduction to lithium insertion compounds and the principles of Li-ion cells, we present a comparative study of the physical and electrochemical properties of positive electrodes used in lithium-ion batteries (LIBs. Electrode materials include three different classes of lattices according to the dimensionality of the Li+ ion motion in them: olivine, layered transition-metal oxides and spinel frameworks. Their advantages and disadvantages are compared with emphasis on synthesis difficulties, electrochemical stability, faradaic performance and security issues.

U.S.-Mexico Economic Relations: Trends, Issues, and Implications

Science.gov (United States)

2012-01-25

Time,” Economia , Fall 2003. 49 Esquivel, Gerardo, and José Antonio Rodríguez-López, “Technology, trade, and wage inequality in Mexico before and after...CRS Report for Congress Prepared for Members and Committees of Congress U.S.- Mexico Economic Relations: Trends, Issues, and Implications...25 JAN 2012 2. REPORT TYPE 3. DATES COVERED 00-00-2012 to 00-00-2012 4. TITLE AND SUBTITLE U.S.- Mexico Economic Relations: Trends, Issues, and

Fabric quality issues related to apparel merchandising

CSIR Research Space (South Africa)

Das, Sonali

2015-02-01

Full Text Available The objectives of this study are to develop an understanding of fabric quality related issues and research gaps relevant to apparel manufacturing and merchandising within the South African context. The specific focus is on fabric objective...

Environmental safety issues for semiconductors (research on scarce materials recycling)

International Nuclear Information System (INIS)

Izumi, Shigekazu

2004-01-01

In the 21st century, in the fabrication of various industrial parts, particularly, current and future electronics devices in the semiconductor industry, environmental safety issues should be carefully considered. We coined a new term, environmental safety issues for semiconductors, considering our semiconductor research and technology which include environmental and ecological factors. The main object of this analysis is to address the present situation of environmental safety problems in the semiconductor industry; some of which are: (1) the generation and use of hazardous toxic gases in the crystal growth procedure such as molecular beam epitaxy (MBE) and metalorganic chemical vapor deposition (MOCVD), (2) the generation of industrial toxic wastes in the semiconductor process and (3) scarce materials recycling from wastes in the MBE and MOCVD growth procedure

Plasma-wall interaction of advanced materials

Directory of Open Access Journals (Sweden)

J.W. Coenen

2017-08-01

Full Text Available DEMO is the name for the first stage prototype fusion reactor considered to be the next step after ITER. For the realization of fusion energy especially materials questions pose a significant challenge already today. Advanced materials solution are under discussion in order to allow operation under reactor conditions [1] and are already under development used in the next step devices. Apart from issues related to material properties such as strength, ductility, resistance against melting and cracking one of the major issues to be tackled is the interaction with the fusion plasma. Advanced tungsten (W materials as discussed below do not necessarily add additional lifetime issues, they will, however, add concerns related to erosion or surface morphology changes due to preferential sputtering. Retention of fuel and exhaust species are one of the main concerns. Retention of hydrogen will be one of the major issues to be solved in advanced materials as especially composites and alloys will introduce new hydrogen interactions mechanisms. Initial calculations show these mechanisms. Especially for Helium as the main impurity species material issues arise related to surfaces modification and embrittlement. Solutions are proposed to mitigate effects on material properties and introduce new release mechanisms.

Problems and Issues Related to Alternative Education.

Science.gov (United States)

Pilat, Mary

1997-01-01

Symposium participants identified policy issues in these areas related to alternative education for at-risk youth: choice, equity, public perception, definition, philosophy, stakeholder involvement, evaluation, staffing, curriculum, governance, and financing. Public discourse and policy discussion were considered essential to implementing…

Japan's regulatory and safety issues regarding nuclear materials transport

Energy Technology Data Exchange (ETDEWEB)

Saito, T. [Nuclear and Industrial Safety Agency, Ministry of Economy, Trade and Industry, Government of Japan, Tokyo (Japan); Yamanaka, T. [Japan Nuclear Energy Safety Organization, Government of Japan, Tokyo (Japan)

2004-07-01

This paper focuses on the regulatory and safety issues on nuclear materials transport which the Government of Japan (GOJ) faces and needs to well handle. Background information about the status of nuclear power plants (NPP) and nuclear fuel cycle (NFC) facilities in Japan will promote a better understanding of what this paper addresses.

Sustainable Sourcing of Global Agricultural Raw Materials: Assessing Gaps in Key Impact and Vulnerability Issues and Indicators.

Directory of Open Access Journals (Sweden)

Nathaniel P Springer

Full Text Available Understanding how to source agricultural raw materials sustainably is challenging in today's globalized food system given the variety of issues to be considered and the multitude of suggested indicators for representing these issues. Furthermore, stakeholders in the global food system both impact these issues and are themselves vulnerable to these issues, an important duality that is often implied but not explicitly described. The attention given to these issues and conceptual frameworks varies greatly--depending largely on the stakeholder perspective--as does the set of indicators developed to measure them. To better structure these complex relationships and assess any gaps, we collate a comprehensive list of sustainability issues and a database of sustainability indicators to represent them. To assure a breadth of inclusion, the issues are pulled from the following three perspectives: major global sustainability assessments, sustainability communications from global food companies, and conceptual frameworks of sustainable livelihoods from academic publications. These terms are integrated across perspectives using a common vocabulary, classified by their relevance to impacts and vulnerabilities, and categorized into groups by economic, environmental, physical, human, social, and political characteristics. These issues are then associated with over 2,000 sustainability indicators gathered from existing sources. A gap analysis is then performed to determine if particular issues and issue groups are over or underrepresented. This process results in 44 "integrated" issues--24 impact issues and 36 vulnerability issues--that are composed of 318 "component" issues. The gap analysis shows that although every integrated issue is mentioned at least 40% of the time across perspectives, no issue is mentioned more than 70% of the time. A few issues infrequently mentioned across perspectives also have relatively few indicators available to fully represent

Sustainable Sourcing of Global Agricultural Raw Materials: Assessing Gaps in Key Impact and Vulnerability Issues and Indicators.

Science.gov (United States)

Springer, Nathaniel P; Garbach, Kelly; Guillozet, Kathleen; Haden, Van R; Hedao, Prashant; Hollander, Allan D; Huber, Patrick R; Ingersoll, Christina; Langner, Megan; Lipari, Genevieve; Mohammadi, Yaser; Musker, Ruthie; Piatto, Marina; Riggle, Courtney; Schweisguth, Melissa; Sin, Emily; Snider, Sara; Vidic, Nataša; White, Aubrey; Brodt, Sonja; Quinn, James F; Tomich, Thomas P

2015-01-01

Understanding how to source agricultural raw materials sustainably is challenging in today's globalized food system given the variety of issues to be considered and the multitude of suggested indicators for representing these issues. Furthermore, stakeholders in the global food system both impact these issues and are themselves vulnerable to these issues, an important duality that is often implied but not explicitly described. The attention given to these issues and conceptual frameworks varies greatly--depending largely on the stakeholder perspective--as does the set of indicators developed to measure them. To better structure these complex relationships and assess any gaps, we collate a comprehensive list of sustainability issues and a database of sustainability indicators to represent them. To assure a breadth of inclusion, the issues are pulled from the following three perspectives: major global sustainability assessments, sustainability communications from global food companies, and conceptual frameworks of sustainable livelihoods from academic publications. These terms are integrated across perspectives using a common vocabulary, classified by their relevance to impacts and vulnerabilities, and categorized into groups by economic, environmental, physical, human, social, and political characteristics. These issues are then associated with over 2,000 sustainability indicators gathered from existing sources. A gap analysis is then performed to determine if particular issues and issue groups are over or underrepresented. This process results in 44 "integrated" issues--24 impact issues and 36 vulnerability issues--that are composed of 318 "component" issues. The gap analysis shows that although every integrated issue is mentioned at least 40% of the time across perspectives, no issue is mentioned more than 70% of the time. A few issues infrequently mentioned across perspectives also have relatively few indicators available to fully represent them. Issues in the

Introduction to the special issue on the technical status of materials for a fusion reactor

Science.gov (United States)

Stork, D.; Zinkle, S. J.

2017-09-01

Materials determine in a fundamental way the performance and environmental attractiveness of a fusion reactor: through the size (power fluxes to the divertor, neutron fluxes to the first wall); economics (replacement lifetime of critical in-vessel components, thermodynamic efficiency through operating temperature etc); plasma performance (erosion by plasma fluxes to the divertor surfaces); robustness against off-normal accidents (safety); and the effects of post-operation radioactivity on waste disposal and maintenance. The major philosophies and methodologies used to formulate programmes for the development of fusion materials are outlined, as the basis for other articles in this special issue, which deal with the fundamental understanding of the issues regarding these materials and their technical status and prospects for development.

Addressing Measurement Issues Related to Bullying Involvement

Science.gov (United States)

Casper, Deborah M.; Meter, Diana J.; Card, Noel A.

2015-01-01

In this article, we address measurement issues related to select aspects of bullying involvement with the goal of moving psychometrically sound measurement practices toward applied bullying research. We first provide a nontechnical introduction to psychometric considerations in measuring bullying involvement, highlighting the importance of…

The Changing Materiality of Music

DEFF Research Database (Denmark)

Bødker, Henrik

A great deal of effort has gone into discussing issues of copyright in relation to the new materialities of the digital distribution of popular music; there has, however, been less focus on the changes that these new developments may invoke with respect to the cultural and social usages of music....... Against the backdrop of recent discussions of popular music as material culture it is argued that emergent usages must be seen in relation to accumulations of different materialities and that such a perspective highlights issues related to both aesthetic reflexivity and agency. Keywords: cultural...... commodity, materiality, reflexivity, music, MP3...

Alternative approaches of SiC and related wide bandgap materials in light emitting and solar cell applications

International Nuclear Information System (INIS)

Wellman, P; Syväjärvi, M; Ou, H

2014-01-01

silicon oxycarbide material can provide potential applications of the Eu luminescent materials to challenging conditions like high temperatures or aggressive environments where the silica has weaknesses. In some approaches, silicon rich silicon oxide that contain silicon nanoclusters emit red to near infrared luminescence due to quantum confinement effects while luminescence at shorter wavelength is difficult due to the interplay of defects and quantum confinement effects. In addition it is applicable as low-k dielectric, etch-stop and passivation layers. It also has an optical band-gap that is smaller than that of SiO2 which may facilitate carrier injection at lower voltages that is suitable for optoelectronics. From materials perspective of emerging materials, it seems distant to consider system related issues. The future demands on communication and lighting devices require higher information flows in modernized optical devices, for example by replacing electrical interconnects with their optical counterparts and tunable backgrounds filters for integrated optics or photonics applications. However, there are materials issues related to such device performance, for example by a non-linearity, that provide the possibility for selective removal or addition of wavelengths using hetero structures in which one side of the structure enhances the light-to-dark sensitivity of long and medium wavelength channels and diminish others, and an opposite behavior in other face of the structure. Certainly materials may be applied in various innovative ways to provide new performances in devices and systems. In any materials and device evaluation, reliability issues in passivation and packaging of semiconductor device structures provide a base knowledge that may be used to evaluate new concepts. Fundamental aspects of dielectric constant, bandgap and band offsets between the valence and conduction band edges between the passivation layer and the semiconductor create a foundation for

Several issues related to regional environmental investigation to inland nuclear power plant

International Nuclear Information System (INIS)

Tian Xinshan; Zhang Xiaofeng

2010-01-01

Based on the goal of carrying out regional environmental investigation and review of recent environmental investigations toward inland nuclear power plant(NPP) site, and combined with the characteristics between inland and coastal sites, this paper is to make deeply analysis on population distribution, environmental characteristics, feasibility of performing emergency plan, characteristics of received water and external human-induced incident of NPP vicinity, then advance several significant issues related regional environmental investigation to inland sites, and make comparison with the investigation to coastal sites. Meantime, on guarantee of the integrity of collected materials during investigation, this paper also makes several proposals to provide reference for carrying out regional environmental investigation to inland NPP site. (authors)

Nanomaterials for environmental studies: Classification, reference material issues, and strategies for physico-chemical characterisation

International Nuclear Information System (INIS)

Stone, Vicki; Nowack, Bernd; Baun, Anders; Brink, Nico van den; Kammer, Frank von der; Dusinska, Maria; Handy, Richard; Hankin, Steven; Hasselloev, Martin; Joner, Erik; Fernandes, Teresa F.

2010-01-01

NanoImpactNet is a European Commission Framework Programme 7 (FP7) funded project that provides a forum for the discussion of current opinions on nanomaterials in relation to human and environmental issues. In September 2008, in Zurich, a NanoImpactNet environmental workshop focused on three key questions: 1.What properties should be characterised for nanomaterials used in environmental and ecotoxicology studies? 2.What reference materials should be developed for use in environmental and ecotoxicological studies? 3.Is it possible to group different nanomaterials into categories for consideration in environmental studies? Such questions have been, at least partially, addressed by other projects/workshops especially in relation to human health effects. Such projects provide a useful basis on which this workshop was based, but in this particular case these questions were reformulated in order to focus specifically on environmental studies. The workshop participants, through a series of discussion and reflection sessions, generated the conclusions listed below. The physicochemical characterisation information identified as important for environmental studies included measures of aggregation/agglomeration/dispersability, size, dissolution (solubility), surface area, surface charge, surface chemistry/composition, with the assumption that chemical composition would already be known. There is a need to have test materials for ecotoxicology, and several substances are potentially useful, including TiO 2 nanoparticles, polystyrene beads labelled with fluorescent dyes, and silver nanoparticles. Some of these test materials could then be developed into certified reference materials over time. No clear consensus was reached regarding the classification of nanomaterials into categories to aid environmental studies, except that a chemistry-based classification system was a reasonable starting point, with some modifications. It was suggested, that additional work may be required

Nanomaterials for environmental studies: Classification, reference material issues, and strategies for physico-chemical characterisation

Energy Technology Data Exchange (ETDEWEB)

Stone, Vicki, E-mail: v.stone@napier.ac.uk [School of Life Sciences, Edinburgh Napier University, 10 Colinton Road, Edinburgh EH10 5DT (United Kingdom); Nowack, Bernd [Materials, Products and the Environment Group, Empa - Swiss Federal Laboratories for Materials Testing and Research, Lerchenfeldstrasse 5 CH - 9014 St. Gallen (Switzerland); Baun, Anders [Department of Environmental Engineering, Technical University of Denmark, NanoDTU, Building 113, 2800 Kgs. Lyngby (Denmark); Brink, Nico van den [Alterra, P.O. Box 47, 6700 AA Wageningen (Netherlands); Kammer, Frank von der [Department of Environmental Geosciences, Vienna University, Althanstrasse 14, Wien 1090 (Austria); Dusinska, Maria [Health Effects Laboratory, Centre for Ecological Economics, Norwegian Institute for Air Research (NILU), Instituttveien, 18, 2027 Kjeller (Norway); Handy, Richard [University of Plymouth, Davy Building, Drake Circus, Plymouth PL4 8AA (United Kingdom); Hankin, Steven [Institute of Occupational Medicine, Research Avenue North, Riccarton, Edinburgh EH14 4AP (United Kingdom); Hasselloev, Martin [Department of Chemistry, Environmental Nanoparticle Research Group, Goeteborg University, SE-412 96 Goeteborg (Sweden); Joner, Erik [Bioforsk Soil and Environment, Fredrik A Dahls vei 20, N-1432 Aas (Norway); Fernandes, Teresa F. [School of Life Sciences, Edinburgh Napier University, 10 Colinton Road, Edinburgh EH10 5DT (United Kingdom)

2010-03-01

NanoImpactNet is a European Commission Framework Programme 7 (FP7) funded project that provides a forum for the discussion of current opinions on nanomaterials in relation to human and environmental issues. In September 2008, in Zurich, a NanoImpactNet environmental workshop focused on three key questions: 1.What properties should be characterised for nanomaterials used in environmental and ecotoxicology studies? 2.What reference materials should be developed for use in environmental and ecotoxicological studies? 3.Is it possible to group different nanomaterials into categories for consideration in environmental studies? Such questions have been, at least partially, addressed by other projects/workshops especially in relation to human health effects. Such projects provide a useful basis on which this workshop was based, but in this particular case these questions were reformulated in order to focus specifically on environmental studies. The workshop participants, through a series of discussion and reflection sessions, generated the conclusions listed below. The physicochemical characterisation information identified as important for environmental studies included measures of aggregation/agglomeration/dispersability, size, dissolution (solubility), surface area, surface charge, surface chemistry/composition, with the assumption that chemical composition would already be known. There is a need to have test materials for ecotoxicology, and several substances are potentially useful, including TiO{sub 2} nanoparticles, polystyrene beads labelled with fluorescent dyes, and silver nanoparticles. Some of these test materials could then be developed into certified reference materials over time. No clear consensus was reached regarding the classification of nanomaterials into categories to aid environmental studies, except that a chemistry-based classification system was a reasonable starting point, with some modifications. It was suggested, that additional work may be

Roadmapping the Resolution of Gas Generation Issues in Packages Containing Radioactive Waste/Materials - A Status Report

International Nuclear Information System (INIS)

Luke, D.E.; Hamp, S.

2002-01-01

Gas generation issues, particularly hydrogen, have been an area of concern for the transport and storage of radioactive materials and waste in the Department of Energy (DOE) Complex. Potentially combustible gases can be generated through a variety of reactions, including chemical reactions and radiolytic decomposition of hydrogen-containing material. Since transportation regulations prohibit shipment of explosives and radioactive materials together, it was decided that hydrogen generation was a problem that warranted the execution of a high-level roadmapping effort. This paper discusses the major gas generation issues within the DOE Complex and the research that has been and is being conducted by the transuranic (TRU) waste, nuclear materials, and spent nuclear fuels (SNF) programs within DOE's Environmental Management (EM) organizations to address gas generation concerns. This paper presents a ''program level'' roadmap that links technology development to program needs and identifies the probability of success in an effort to understand the programmatic risk associated with the issue of gas generation. This paper also presents the status of the roadmap and follow-up activities

Material-related issues at high-power and high-energy ion beam facilities

CERN Document Server

Bender, M.; Tomut, M.; Trautmann, C.

2015-01-01

When solids are exposed to energetic ions (MeV-GeV), their physical and chemical structure can be severely modified. The change is governed by ultrafast dynamical processes starting from the deposition of large energy densities, electronic excitation and ionization processes, and finally damage creation in the atomic lattice system. In many materials, each projectile creates a cylindrical track with a few nanometers in diameter and up to many μm in length. To study and monitor the creation of damage, the GSI irradiation facility dedicated to materials science provides different in-situ and on-line techniques such as high resolution microscopy, X-ray diffraction, optical absorption spectroscopy, thermal imaging and residual gas analysis. The irradiation experiments can be performed under various gas atmospheres and under cryogenic or elevated temperature.

Environmental safety case and cement-related issues for intermediate-level waste in a co-located geological disposal facility

International Nuclear Information System (INIS)

Norris, Simon; Williams, Steve

2012-01-01

Simon Norris of the NDA described safety case and cement-related issues for a geological disposal facility for ILW. The Environmental Safety Case (ESC) needs to demonstrate a clear understanding of: - The disposal facility in its geological setting. - How the disposal system will evolve. - How the various components of system (including cementitious materials) contribute to meeting the requirement of providing a safe long-term solution for the disposed wastes. The ESC must include and support the key environmental safety arguments with underpinning lines of reasoning and detailed analysis, assessments and supporting evidence (including those relating to cementitious materials). In an ILW disposal system, cementitious materials could be used in several ways: - As in-package grouting materials and package materials. - Backfill material. - Shotcrete and other vault lining technologies that could be employed during construction and operation. - Engineered seals. - Structural materials. Given that cementitious materials will play important roles in the disposal system - and within a general strategy for managing uncertainty - the NDA is conducting, or has recently conducted, research into the following topics: - Assessment of the potential for interactions between disposal modules for low- and intermediate-level wastes and for HLW and spent fuel. - The effect of possible cementitious vault liners (e.g. composed from shotcrete) on the early post-closure evolution of waste-derived gas in a geological disposal facility for low- and intermediate-level wastes. - The evolution of cementitious backfill materials, including cracking, and related evolution of groundwater flow and chemistry in the vault environment of a geological disposal facility. - Evidence from nature and archaeology relevant to the long-term properties of cement. - Interaction of waste-derived gas (particularly carbon-14 bearing gas) with cementitious materials in the facility near-field. - The choice of in

Attachment-related mental representations: introduction to the special issue.

Science.gov (United States)

Thompson, Ross A

2008-12-01

Bowlby's concept of mental working models of self, attachment figures, and the social world has been theoretically generative as a bridge between early relational experience and the beliefs and expectations that color later relationships. Contemporary attachment researchers, following his example, are applying new knowledge of children's conceptual development to their study of attachment-related mental representations in children and adults. The contributors to this special issue highlight recent advances in how the mental representations arising from attachment security should be conceptualized and studied, and identify a number of important directions for future work. This paper introduces the special issue by summarizing the major ideas of Bowlby and his followers concerning the nature and development of mental working models, points of theoretical clarity and uncertainty, and challenges in assessing these representations, as well as profiling each of the contributions to this issue.

Legal issues relating to the Ontario FIT contract - An update

International Nuclear Information System (INIS)

Weizman, Michael

2011-01-01

The paper discusses the legal issues related to the Ontario FIT contract, which includes the FIT waiver agreement, WTO challenge, FIT extension, political risk assessment and issues related to unforeseen events beyond human control (force majeure). The risk of termination of the FIT waiver is omitted for convenience by OPA but timing implications relating to the FIT waiver are included. The binding agreement for supply of generating equipment is also presented and the term sheet for turbine equipment and bill of purchase being understood as binding agreements is questioned. Political risks relate to existing contracts, lawsuit risks and changes to the REA process. Change in government and the implications of minority government can be added to the political risks. A successful WTO challenge has been assumed and the possible implications are discussed. Some of them include risk to FIT contracts already issued; changes in DC requirements and in FIT contract pricing and re-pricing of construction and turbine equipment supply contracts if DC requirements are relaxed.

Clean energy industries and rare earth materials: Economic and financial issues

International Nuclear Information System (INIS)

Baldi, Lucia; Peri, Massimo; Vandone, Daniela

2014-01-01

In the last few years, rare earth materials (REM) prices have experienced a strong increase due to geopolitical and sustainability issues. Financial markets could already have factored in concerns about shortages of REM supplies into clean energy companies’ valuations. We use a multifactor market model for the period January 2006 to September 2012 to analyze the impact of REM price trends – specifically dysprosium and neodymium – on six clean energy indices (NYSE–BNEF) tracking the world's most important companies in the clean energy sector. The results show that during period of price increase, there is a negative relationships between REM price changes and the stock market performance of some clean energy indices. The European clean energy index is also negatively affected, and this effect could be relevant to policy makers, considering that Europe is implementing some relevant policy actions to support the development of the clean energy industry. - Highlights: • Clean energy is an industry with a double-digit growth market rate in the last years. • Rare earth materials are a key component in the development process of this industry. • Recently REMs’ prices have skyrocketed and the clean energy industry is in turmoil. • We analyze the effect of REMs price on the stock market performances of clean industry. • We find negative relation between REMs price increase and stock market performances

Materials engineering issues, LMFBR steam generators

International Nuclear Information System (INIS)

Spalaris, C.N.; Challenger, K.D.; Day, R.A.; Dutina, D.; Ring, P.J.

1976-01-01

Selection of 2-1/4 Cr-1 Mo as the reference construction material for LMFBR steam generators assumed a balance between its known intrinsic properties and our ability to accommodate certain of its deficiencies through design allowance. A comprehensive development program was undertaken to define base data needed, confirm assumptions made relative to desired performance, minimize defects by optimization of melting, fabrication and heat treatment processes, and prepare specifications for purchasing reactor components

Some issues related to polarized radiative transfer in a multilayer medium with a changing index of refraction

International Nuclear Information System (INIS)

Garcia, R D M

2012-01-01

A couple of issues raised in a recent work on Fresnel boundary and interface conditions for polarized radiative transfer are discussed. The first issue concerns a normalization that has to be performed on the transmission matrix relating the transmitted and incident Stokes vectors at a smooth interface between different materials. It was found that the normalization step is not performed in a correct way in many existing works and so the effects of the two most frequent discrepancies encountered in these works are evaluated for a simple model of an atmosphere-water system. The second issue has to do with a choice of the sign of the parallel component of the amplitude coefficient of reflection R l when constructing the reflection matrix that relates the reflected and incident Stokes vectors at a smooth interface. A computational approach based on the limit to the case with constant index of refraction is used to determine the appropriate sign of R l for polarized radiative transfer calculations in multilayers with different indices of refraction.

U.S.-China Relations: Policy Issues

Science.gov (United States)

2010-03-12

China Relations: Policy Issues Congressional Research Service 8 Center; the U.S.-China Energy Efficiency Action Plan; and the U.S.-China Energy...January 25, 2010. 28 Liu Shengjun, “How to Better Use Forex Reserves,” China Daily, January 13, 2010. 29 Paul R. La Monica, “China Still Likes Us…For...or commercialization of carbon capture and sequestration technology, improve energy efficiency , or renewable energy sources. H.R. 2454 Waxman

IE Information Notice No. 85-08: Industry experience on certain materials used in safety-related equipment

International Nuclear Information System (INIS)

Jordan, E.L.

1992-01-01

This information notice is being issued to provide licensees and construction permit holders with information pertaining to the behavior of certain materials used in safety-related equipment. The materials, as described below, were observed to have the potential of degrading the operability of safety-related equipment. These observations were made during environmental qualification testing and/or during routine inspection of in-service equipment. The notice describes the following: elastomeric seals used in personnel air locks for the reactor containment systems; epoxy phenolic coating applied to the lower portion of the interior surface of diesel oil storage tanks; the use of Viton elastomer as the seal material in hydrogen recombiner applications; and environmental qualification of ASCO NP valves with Viton and ethylene propylene parts

TFTR materials issues and problems during design and construction

International Nuclear Information System (INIS)

Sabado, M.; Little, R.

1984-01-01

TFTR as well as its contemporaries, T15, JT60, and JET, have important contributions to make towards our understanding of plasma conditions in the thermonuclear regime. One of the main objectives of TFTR is to produce fusion power densities approaching those in a fusion reactor, approx.= 1 Wcm -3 at Q approx.= 1-2. TFTR will be the first tokamak to routinely use deuterium tritium, and produce approx.= 10 19 fusion neutrons per pulse. With startup of TFTR on December 24, 1982, the demonstration of physics feasibility of 'breakeven' is close at hand. Since TFTR performance will be reactor relevant, the capability of materials/components to withstand the hostile effects of a plasma environment will be presented. It is intended that designers of future fusion devices benefit from the materials technology developments and applications on TFTR. In an attempt to comply with this mandate, this paper will describe TFTR issues on materials, their developments, selections, problems, and solutions. Special emphasis will be given, in particular, to the impurity control devices in TFTR, namely, the limiter and surface pumping system located inside the vacuum vessel. The plasma will interact with these components and they will be subjected to disruptions, a vacuum of 10 -6 to 10 -8 torr and a nominal temperatures of 0 C. 'Painful' materials development problems encountered will be reviewed, as well as important 'lessons learned'. A briefing on the materials of construction will be given, with some comments on the problems that developed and their solutions. (orig.)

'Speak out' - issues in participatory materials development

Directory of Open Access Journals (Sweden)

Zannie Bock

2008-08-01

Full Text Available This article outlines the development of a beginner English course called 'Speak Out' for adults in Adult Basic Education and Training classes in the early 1990s. The course uses an innovative roleplay methodology which builds on the experiences and language knowledge of the adult learners. It was conceptualised and developed within a participatory approach to adult learning and materials development. The article explores the tension between the ideals of the participatory approach and the constraints exerted by contextual and other factors. The article begins with an introduction of the context within which the materials were conceptualised, then offers a brief overview of the participatory approach, and then considers the following aspects of the 'Speak Out' course: the language learning methodology, issues of teacher competence and development, and lastly, the materials development process itself. Hierdie artikel beskryf die ontwikkeling van 'n beginnerskursus vir Engels, getitel 'Speak Out'. Dit is ontwerp vir volwassenes in klasse binne 'n Volwasse Basiese Onderrig en Opleiding-program in die vroee 1990s. Die kursus maak gebruik van innoverende rolspel as 'n metode wat spesifiek aansluit by die ervarings en taalkennis van volwasse leerders. Dit is gekonseptualiseer en ontwikkel as deel van 'n deelnemende benadering tot die opleiding van volwassenes en die ontwikkeling van hulpmiddels. Die artikel ondersoek die spanning tussen die ideale van 'n deelnemende benadering en die beperkinge wat opgele word deur kontekstuele en ander faktore. Die inleiding van die artikel gee 'n uiteensetting van die konteks waarbinne die hulpmiddels gekonseptualiseer is. Dan volg 'n kort oorsig oor die deelnemende benadering, en die volgende aspekte van die 'Speak Out'-kursus word oorweeg: die metodologie van taalaanleer, kwessies rondom onderwysers se vaardighede en ontwikkeling, en laastens, die proses van hulpmiddel-ontwikkeling self.

Musculoskeletal disorders and mental health-related issues as occupational hazards among dental practitioners in Salem city: A cross-sectional study

Directory of Open Access Journals (Sweden)

Vanita D Revankar

2017-01-01

Full Text Available Background: Like in any other profession, dental surgeons are also afflicted by many occupational health hazards such as Musculoskeletal disorders (MSD and mental health related issues. Aims: To assess the distribution of MSD and mental health related issues amidst dentists in Salem City according to age, sex and number of working hours per week. Objectives: A survey was organized to check the rate of occurrence of these occupational health hazards among dental practitioners in Salem city. Materials and Methods: The study was conducted among one hundred and fifty dentists practicing in Salem City in the form of questionnaire. Dentists were asked about any occupational disease that they suffered related to a musculo–skeletal pain and its location whether in the back, upper limbs or lower limbs. In addition to this,dentists were asked about mental stress that they had experienced. Results: MSD showed higher rate of prevalence compared to mental health related issues. Conclusion: The application of preventive measures is necessary, in view of the high rate of these disorders in the society of dental practitioners.

Issues relating to airborne applications of HTS SQUIDs

International Nuclear Information System (INIS)

Foley, C P; Leslie, K E; Binks, R A; Lam, S H K; Du, J; Tilbrook, D L; Mitchell, E E; Macfarlane, J C; Lee, J B; Turner, R; Downey, M; Maddever, A

2002-01-01

Airborne application of HTS SQUIDs is the most difficult environment for their successful deployment. In order to operate with the sensitivity required for a particular application, there are many issues to be addressed such as the need for very wide dynamic range electronics, motion noise elimination, immunity to large changing magnetic fields and cultural noise sources. This paper reviews what is necessary to achieve an airborne system giving examples in geophysical mineral exploration. It will consider issues relating to device design and fabrication, electronics, dewar design, suspension system requirements and noise elimination methods

Issues relating to airborne applications of HTS SQUIDs

CERN Document Server

Foley, C P; Binks, R A; Lam, S H K; Du, J; Tilbrook, D L; Mitchell, E E; MacFarlane, J C; Lee, J B; Turner, R; Downey, M; Maddever, A

2002-01-01

Airborne application of HTS SQUIDs is the most difficult environment for their successful deployment. In order to operate with the sensitivity required for a particular application, there are many issues to be addressed such as the need for very wide dynamic range electronics, motion noise elimination, immunity to large changing magnetic fields and cultural noise sources. This paper reviews what is necessary to achieve an airborne system giving examples in geophysical mineral exploration. It will consider issues relating to device design and fabrication, electronics, dewar design, suspension system requirements and noise elimination methods.

Current safety issues related to research reactor operation

International Nuclear Information System (INIS)

Alcala-Ruiz, F.

2000-01-01

The Agency has included activities on research reactor safety in its Programme and Budget (P and B) since its inception in 1957. Since then, these activities have traditionally been oriented to fulfil the Agency's functions and obligations. At the end of the decade of the eighties, the Agency's Research Reactor Safety Programme (RRSP) consisted of a limited number of tasks related to the preparation of safety related publications and the conduct of safety missions to research reactor facilities. It was at the beginning of the nineties when the RRSP was upgraded and expanded as a subprogramme of the Agency's P and B. This subprogramme continued including activities related to the above subjects and started addressing an increasing number of issues related to the current situation of research reactors (in operation and shut down) around the world such as reactor ageing, modifications and decommissioning. The present paper discusses some of the above issues as recognised by various external review or advisory groups (e.g., Peer Review Groups under the Agency's Performance Programme Appraisal System (PPAS) or the standing International Nuclear Safety Advisory Group (INSAG)) and the impact of their recommendations on the preparation and implementation of the part of the Agency's P and B relating to the above subject. (author)

Present knowledge and perspectives on the role of copper in brake materials and related environmental issues: A critical assessment.

Science.gov (United States)

Straffelini, Giovanni; Ciudin, Rodica; Ciotti, Alessandro; Gialanella, Stefano

2015-12-01

This critical review presents several aspects related to the use of copper as a main component in brake pads in road vehicles. The compositions of these materials are attracting increasing interest and concern due to the relative contribution of wear products to particulate matter emissions in the environment as a result of braking action even though there has been a reduction in exhaust products from internal combustion engines. We review the data on the main wear mechanisms in brake systems and highlight the positive role of copper. However, similar to other heavy metal emissions, even the release of copper into the atmosphere may have important environmental and health effects. Thus, several replacement strategies are being pursued, and the positive and negative features will be critically reviewed. Additionally, the future perspectives in materials development will be discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

Special Issue: 14th International Symposium on Novel and Nano Materials

Science.gov (United States)

Kim, Woo-Byoung; Choa, Yong-Ho; Ahn, Hyo-Jin; Park, Il-Kyu

2017-09-01

This Special Issue of Applied Surface Science is intended to provide a collection of peer-reviewed contributions presented at the 14th International Symposium on Novel Nano Materials (ISNNM) held in Budapest, Hungary as one of the most beautiful cities in Europe from July 3 to July 8, 2016. All selected papers underwent the regular peer review process as set by the journal of Applied Surface Science and its publisher (Elsevier).

Material Issues of Blanket Systems for Fusion Reactors - Compatibility with Cooling Water -

Science.gov (United States)

Miwa, Yukio; Tsukada, Takashi; Jitsukawa, Shiro

Environmental assisted cracking (EAC) is one of the material issues for the reactor core components of light water power reactors(LWRs). Much experience and knowledge have been obtained about the EAC in the LWR field. They will be useful to prevent the EAC of water-cooled blanket systems of fusion reactors. For the austenitic stainless steels and the reduced-activation ferritic/martensitic steels, they clarifies that the EAC in a water-cooled blanket does not seem to be acritical issue. However, some uncertainties about influences on water temperatures, water chemistries and stress conditions may affect on the EAC. Considerations and further investigations elucidating the uncertainties are discussed.

Book Review: EU External Relations Law: Text, Cases and Materials

Directory of Open Access Journals (Sweden)

Graham Butler

2014-06-01

Full Text Available This latest textbook contributing to the field of EU external relations law is unique in that it is the first such book in the post-Treaty of Lisbon environment to take a wide-angled look on as many aspects of the growing area as it continues to develop within the legal parameters as set by the Treaties, and it is suitably placed to become the core text for teaching this expanding EU policy field. In their book, EU External Relations Law: Text, Cases and Materials, Van Vooren and Wessel seek to fill the gap in up-to-date literature from a legal standpoint in the field of external relations of the EU, with a book that is suitable for delivery as a core textbook for students of all levels. Their analysis covering fifteen long chapters offers the reader a comprehensive insight into the world of EU external relations law, and allows for a thoroughly better understanding of all the encapsulated issues that are at play.

ACNP Public Education Program on nuclear medicine and related low-level waste issues. Final technical report, 7 July 1980-30 June 1983

International Nuclear Information System (INIS)

The goal of the ACNP Public Education Program was to educate and inform the greatest number of people in the areas of radiation and health and, in turn, to gain the public's understanding of Nuclear Medicine. The related low-level waste issues also were incorporated into the program. To carry out the program's objectives and design to educate the public, the ACNP established a Speaker Bureau which consists of those members of the ACNP and the Society of Nuclear Medicine (SNM) who go through the training seminars, conducted by ACNP, and are available to speak publicly about Nuclear Medicine and related low-level waste issues. In addition, the ACNP developed the necessary audiovisual and printed materials to be used in their own right or as supplemental tools. Promotion of the Speakers Bureau and the audiovisual materials to the media and other various public forums was undertaken

Laser Shock Processing of Metallic Materials: Coupling of Laser-Plasma Interaction and Material Behaviour Models for the Assessment of Key Process Issues

International Nuclear Information System (INIS)

Ocana, J. L.; Morales, M.; Molpeceres, C.; Porro, J. A.

2010-01-01

Profiting by the increasing availability of laser sources delivering intensities above 109 W/cm 2 with pulse energies in the range of several Joules and pulse widths in the range of nanoseconds, laser shock processing (LSP) is consolidating as an effective technology for the improvement of surface mechanical and corrosion resistance properties of metals. The main advantage of the laser shock processing technique consists on its capability of inducing a relatively deep compression residual stresses field into metallic alloy pieces allowing an improved mechanical behaviour, explicitly, the life improvement of the treated specimens against wear, crack growth and stress corrosion cracking. Although significant work from the experimental side has been contributed to explore the optimum conditions of application of the treatments and to assess their ultimate capability to provide enhanced mechanical behaviour to work-pieces of typical materials, only limited attempts have been developed in the way of full comprehension and predictive assessment of the characteristic physical processes and material transformations with a specific consideration of real material properties. In the present paper, a review on the physical issues dominating the development of LSP processes from a high intensity laser-matter interaction point of view is presented along with the theoretical and computational methods developed by the authors for their predictive assessment and practical results at laboratory scale on the application of the technique to different materials.

Implementation of Safety and Security Issues in the Transport of Radioactive Material in Argentina

International Nuclear Information System (INIS)

López Vietri, J.; Elechosa, C.; Gerez Miranda, C.; Menossi, S.; Rodríguez Roldán, M.S.; Fernández, A.

2016-01-01

This paper is intended to describe implementation of safety and security issues in the transport of radioactive material by the Nuclear Regulatory Authority (in Spanish Autoridad Regulatoria Nuclear, ARN), which is the Competent Authority of Argentina in Safety, Security and Safeguards of radioactive and nuclear material. There are depicted main regulatory activities dealing with the mentioned issues, and relevant milestones of national regulatory standards and guidance applied, that are based on requirements and guides from IAEA. Interfaces between Safety and Security sections are most of the times complementary but sometimes conflictive, therefore the resolution of such conflicts and goals achieved during their implementation are also commented; as well as future joint planned activities between both sections of ARN as a way to provide safety and security without compromising one or the other. (author)

Radiation resistance of InP-related materials

International Nuclear Information System (INIS)

Yamaguchi, Masafumi; Takamoto, Tatsuya; Ikeda, Eiji; Kurita, Hiroshi; Ohmori, Masamichi; Ando, Koshi; Vargas-Aburto, C.

1995-01-01

Irradiation effects of 1-MeV electrons on InP-related materials such as InP, InGaP and InGaAsP have been examined in comparison with those of GaAs. Superior radiation-resistance of InP-related materials and their devices compared to GaAs has been found in terms of minority-carrier diffusion length and properties of devices such as solar cells and light-emitting devices. Moreover, minority-carrier injection-enhanced annealing of radiation-induced defects in InP-related materials has also been observed. (author)

The Concept of Cultural Relativity in Moral Judgments Concerning Gender-Related Issues.

Science.gov (United States)

Boyd, D. R.; And Others

The comparative study was designed to determine whether cultural relativism and ethical reasoning develop in a hierarchical manner when applied to culturally different phenomena. The phenomena investigated were moral judgments concerning gender-related issues. Thirty-six first through sixth-grade students from two private schools and 130…

Resolving Radiological Classification and Release Issues for Many DOE Solid Wastes and Salvageable Materials

International Nuclear Information System (INIS)

Hochel, R.C.

1999-01-01

The cost effective radiological classification and disposal of solid materials with potential volume contamination, in accordance with applicable U.S. Department of Energy (DOE) Orders, suffers from an inability to unambiguously distinguish among transuranic waste, low-level waste, and unconditional-release materials. Depending on the classification, disposal costs can vary by a hundred-fold. But in many cases, the issues can be easily resolved by a combination of process information, some simple measurements, and calculational predictions from a computer model for radiation shielding.The proper classification and disposal of many solid wastes requires a measurement regime that is able to show compliance with a variety of institutional and regulatory contamination limits. Although this is not possible for all solid wastes, there are many that do lend themselves to such measures. Several examples are discussed which demonstrate the possibilities, including one which was successfully applied to bulk contamination.The only barriers to such broader uses are the slow-to-change institutional perceptions and procedures. For many issues and materials, the measurement tools are available; they need only be applied

Resolving Radiological Classification and Release Issues for Many DOE Solid Wastes and Salvageable Materials

Energy Technology Data Exchange (ETDEWEB)

Hochel, R.C.

1999-06-14

The cost effective radiological classification and disposal of solid materials with potential volume contamination, in accordance with applicable U.S. Department of Energy (DOE) Orders, suffers from an inability to unambiguously distinguish among transuranic waste, low-level waste, and unconditional-release materials. Depending on the classification, disposal costs can vary by a hundred-fold. But in many cases, the issues can be easily resolved by a combination of process information, some simple measurements, and calculational predictions from a computer model for radiation shielding.The proper classification and disposal of many solid wastes requires a measurement regime that is able to show compliance with a variety of institutional and regulatory contamination limits. Although this is not possible for all solid wastes, there are many that do lend themselves to such measures. Several examples are discussed which demonstrate the possibilities, including one which was successfully applied to bulk contamination.The only barriers to such broader uses are the slow-to-change institutional perceptions and procedures. For many issues and materials, the measurement tools are available; they need only be applied.

Research strategies and programs related to the National Plan of Management of Radioactive Materials and Wastes. Issue 2008

International Nuclear Information System (INIS)

2008-01-01

After having recalled the legal context defining the requirements of the PNGMDR (Plan national de gestion des matieres et dechets radioactifs, national plan of management of radioactive materials and wastes), this report presents several research programs which address various domains: waste packaging and behaviour (decontamination, waste characterization, waste processing, the storage sizing inventory model, parcel behaviour, used fuel evolution, future wastes), warehousing and storage in deep geological formation (characterization of the Meuse/Haute-Marne site, scientific program, simulation programs, measurement means for storage monitoring, knowledge base, security and reversibility options for storage design, security studies, warehousing options), storage of radiferous and graphite wastes, investigation of separation/transmutation scenarios, investigations related to separation, investigations related to fuel fabrication, investigations related to the transmutation of minor actinides, researches in social and human sciences

Nonlinear constitutive relations for anisotropic elastic materials

Science.gov (United States)

Sokolova, Marina; Khristich, Dmitrii

2018-03-01

A general approach to constructing of nonlinear variants of connection between stresses and strains in anisotropic materials with different types of symmetry of properties is considered. This approach is based on the concept of elastic proper subspaces of anisotropic materials introduced in the mechanics of solids by J. Rychlewski and on the particular postulate of isotropy proposed by A. A. Il’yushin. The generalization of the particular postulate on the case of nonlinear anisotropic materials is formulated. Systems of invariants of deformations as lengths of projections of the strain vector into proper subspaces are developed. Some variants of nonlinear constitutive relations for anisotropic materials are offered. The analysis of these relations from the point of view of their satisfaction to general and limit forms of generalization of partial isotropy postulate on anisotropic materials is performed. The relations for particular cases of anisotropy are written.

Recycling issues facing target and RTL materials of inertial fusion designs

International Nuclear Information System (INIS)

El-Guebaly, L.; Wilson, P.; Sawan, M.; Henderson, D.; Varuttamaseni, A.

2005-01-01

Designers of heavy ion (HI) and Z-pinch inertial fusion power plants have explored the potential of recycling the target and recyclable transmission line (RTL) materials as an alternate option to disposal in a geological repository. This work represents the first time a comprehensive recycling assessment was performed on both machines with an exact pulse history. Our results offer two divergent conclusions on the recycling issue. For the HI concept, target recycling is not a 'must' requirement and the preferred option is the one-shot use scenario as target materials represent a small waste stream, less than 1% of the total nuclear island waste. We recommend using low-cost hohlraum materials once-through and then disposing of them instead of recycling expensive materials such as Au and Gd. On the contrary, RTL recycling is a 'must' requirement for the Z-pinch concept in order to minimize the RTL inventory and enhance the economics. The RTLs meet the low level waste and recycling dose requirements with a wide margin when recycled for the entire plant life even without a cooling period. While recycling offers advantages to the Z-pinch system, it adds complexity and cost to the HI designs

Social justice issues related to uneven distribution of resources.

Science.gov (United States)

Ervin, Naomi E; Bell, Sue Ellen

2004-01-01

This article examines the social justice issues resulting from the uneven distribution of resources. In this article, justice theories are discussed in relation to two of these issues: lack of adequate food and shelter and inequitable access to an appropriate continuum of health care. Public health nurses have the obligation to deal with the results of poverty and the uneven distribution of resources, which pose a threat to the common good in the United States and throughout the global community.

Japan-U.S. Relations: Issues for Congress

Science.gov (United States)

2013-02-15

China called for a boycott on Japanese goods and defaced Japanese retail stores. Japanese auto manufacturers experienced sharp declines in sales in...TPP is now an agreement under negotiation among the original four countries plus the United States, Australia, Canada, Mexico, Peru, Malaysia , and...Inside U.S. Trade, April 27, 2012. 44 World Trade Online , April 5, 2012. Japan-U.S. Relations: Issues for Congress Congressional Research Service 25

Near term and long term materials issues and development needs for plasma interactive components

International Nuclear Information System (INIS)

Mattas, R.F.

1986-01-01

Plasma interactive components (PICs), including the first wall, limiter blades, divertor collector plates, halo scrapers, and RF launchers, are exposed to high particle fluxes that can result in high sputtering erosion rates and high heat fluxes. In addition, the materials in reactors are exposed to high neutron fluxes which will degrade the bulk properties. This severe environment will limit the materials and designs which can be used in fusion devices. In order to provide a reasonable degree of confidence that plasma interactive components will operate successfully, a comprehensive development program is needed. Materials research and development plays a key role in the successful development of PICs. The range of operating conditions along with a summary of the major issues for materials development is described. The areas covered include plasma/materials interactions, erosion/redeposition, baseline materials properties, fabrication, and irradiation damage effects. Candidate materials and materials development needs in the near term and long term are identified

Joining of advanced materials

CERN Document Server

Messler, Robert W

1993-01-01

Provides an unusually complete and readable compilation of the primary and secondary options for joining conventional materials in non-conventional ways. Provides unique coverage of adhesive bonding using both organic and inorganic adhesives, cements and mortars. Focuses on materials issues without ignoring issues related to joint design, production processing, quality assurance, process economics, and joining performance in service.Joining of advanced materials is a unique treatment of joining of both conventional and advanced metals andalloys, intermetallics, ceramics, glasses, polymers, a

76 FR 63573 - Roundtable on Issues Relating to Conflict Minerals

Science.gov (United States)

2011-10-13

...-10] Roundtable on Issues Relating to Conflict Minerals AGENCY: Securities and Exchange Commission... Consumer Protection Act (the ``Act''), which relates to reporting requirements regarding conflict minerals... of conflict minerals from the Democratic Republic of the Congo and adjoining countries. On December...

The technological raw material heating furnaces operation efficiency improving issue

Science.gov (United States)

Paramonov, A. M.

2017-08-01

The issue of fuel oil applying efficiency improving in the technological raw material heating furnaces by means of its combustion intensification is considered in the paper. The technical and economic optimization problem of the fuel oil heating before combustion is solved. The fuel oil heating optimal temperature defining method and algorithm analytically considering the correlation of thermal, operating parameters and discounted costs for the heating furnace were developed. The obtained optimization functionality provides the heating furnace appropriate thermal indices achievement at minimum discounted costs. The carried out research results prove the expediency of the proposed solutions using.

Management of Slightly Contaminated Materials: Status and Issues

International Nuclear Information System (INIS)

Pescatore, C.

2001-01-01

Usually, when values in risk assessment are discussed, e.g., within RISCOM and VALDOR, it is said, that there are values behind the risk assessment by the experts and that these values are hidden within the basic assumptions made and are not easily visible, especially to the higher-level decision-makers. It is shown in this paper, that the opposite can also happen: the decision-makers, those that set the standards, may not be aware of the all the relevant facts or they may ignore them because of how their institutional role and mandate are framed. In particular, it is important to realise that while nuclear power by-products are indeed specifically recognised for their radioactive hazard, radioactive products, by-products and 'wastes' also arise from practices other than nuclear power generation. As the threshold radioactivity levels for classifying a material as waste - or, what is the same, for allowing it for free release - become lower and lower, a larger and larger amount of by-products of human activities become concerned by the question 'is this radioactively dangerous material?' and how to deal with it. A holistic look at radioactivity both of man-made and natural origin needs to be implemented in order to claim and achieve consistency in the protection of public health and avoid issues of intra- and inter-generational equity

Assessment of combustion and related issues in the DWPF and ITP waste tanks

International Nuclear Information System (INIS)

Ginsberg, T.

1994-04-01

This report presents a review of the safety analyses described in the DWPF Safety Analysis Report, the combustion analysis of the ITP Tanks 48 and 49, and presents conclusions drawn from interviews staff on issues related to accident analysis, in particular on issues related to combustion phenomena. The major objectives of this report are to clarify the issues related to the modes of combustion and expected loads on process vessels and structures and, in addition, to offer recommendations which would improve the defense-in-depth posture of the DWPF

Climate and climate-related issues for the safety assessment SR-Can

International Nuclear Information System (INIS)

Naeslund, Jens-Ove

2006-11-01

The purpose of this report is to document current scientific knowledge of the climate-related conditions and processes relevant to the long-term safety of a KBS-3 repository to a level required for an adequate treatment in the safety assessment SR-Can. The report also includes a concise background description of the climate system. The report includes three main chapters: A description of the climate system (Chapter 2); Identification and discussion of climate-related issues (Chapter 3); and, A description of the evolution of climate-related conditions for the safety assessment (Chapter 4). Chapter 2 includes an overview of present knowledge of the Earth climate system and the climate conditions that can be expected to occur in Sweden on a 100,000 year time perspective. Based on this, climate-related issues relevant for the long-term safety of a KBS-3 repository are identified. These are documented in Chapter 3 'Climate-related issues' to a level required for an adequate treatment in the safety assessment. Finally, in Chapter 4, 'Evolution of climate-related conditions for the safety assessment' an evolution for a 120,000 year period is presented, including discussions of identified climate-related issues of importance for repository safety. The documentation is from a scientific point of view not exhaustive, since such a treatment is neither necessary for the purposes of the safety assessment nor possible within the scope of a safety assessment. As further described in the SR-Can Main Report and in the Features Events and Processes report, the content of the present report has been audited by comparison with FEP databases compiled in other assessment projects. This report follows as far as possible the template for documentation of processes regarded as internal to the repository system. However, the term processes is not used in this report, instead the term issue has been used. Each issue includes a set of processes together resulting in the behaviour of a

Climate and climate-related issues for the safety assessment SR-Can

Energy Technology Data Exchange (ETDEWEB)

Naeslund, Jens-Ove (comp.)

2006-11-15

The purpose of this report is to document current scientific knowledge of the climate-related conditions and processes relevant to the long-term safety of a KBS-3 repository to a level required for an adequate treatment in the safety assessment SR-Can. The report also includes a concise background description of the climate system. The report includes three main chapters: A description of the climate system (Chapter 2); Identification and discussion of climate-related issues (Chapter 3); and, A description of the evolution of climate-related conditions for the safety assessment (Chapter 4). Chapter 2 includes an overview of present knowledge of the Earth climate system and the climate conditions that can be expected to occur in Sweden on a 100,000 year time perspective. Based on this, climate-related issues relevant for the long-term safety of a KBS-3 repository are identified. These are documented in Chapter 3 'Climate-related issues' to a level required for an adequate treatment in the safety assessment. Finally, in Chapter 4, 'Evolution of climate-related conditions for the safety assessment' an evolution for a 120,000 year period is presented, including discussions of identified climate-related issues of importance for repository safety. The documentation is from a scientific point of view not exhaustive, since such a treatment is neither necessary for the purposes of the safety assessment nor possible within the scope of a safety assessment. As further described in the SR-Can Main Report and in the Features Events and Processes report, the content of the present report has been audited by comparison with FEP databases compiled in other assessment projects. This report follows as far as possible the template for documentation of processes regarded as internal to the repository system. However, the term processes is not used in this report, instead the term issue has been used. Each issue includes a set of processes together resulting in the

Safety measures to address the year 2000 issue at medical facilities which use radiation generators and radioactive materials

International Nuclear Information System (INIS)

1999-03-01

In resolution GC(42)/RES/11 on 'Measures to Address the Year 2000 (Y2K) Issue', adopted on 25 September 1998, the General Conference of the International Atomic Energy Agency (IAEA) - inter alia - urged Member States 'to share information with the Secretariat regarding diagnostic and corrective actions being planned or implemented by operating and regulatory organizations at their ... medical facilities which use radioactive materials to make those facilities Year 2000 ready', encouraged the Secretariat 'within existing resources to act as a clearing-house and central point of contact for Member States to exchange information regarding diagnostic and remediation actions being taken at ... medical facilities which use radioactive materials to make these facilities Year 2000 ready', urged the Secretariat 'to handle the information provided by Member States carefully' and requested the Director General to report to it at its next (1999) regular session on the implementation of that resolution. The IAEA Secretariat convened a group of consultants who met in Vienna from 14 to 18 December 1998 and produced this report. The consultants decided that the report should cover not just 'medical facilities which use radioactive materials' but also medical facilities which, while perhaps not using radioactive materials, use ionizing radiation produced by radiation generators such as accelerators. The reports issued together are: Achieving Year 2000 Readiness: Basic Processes; Safety Measures to Address the Year 2000 Issue at Medical Facilities Which Use Radiation Generators and Radioactive Materials; and Safety Measures to Address the Year 2000 Issue at Radioactive Waste Management Facilities. This report addresses means of dealing with the Y2K problem at medical facilities which use radiation generators and radioactive materials

Physical security and cyber security issues and human error prevention for 3D printed objects: detecting the use of an incorrect printing material

Science.gov (United States)

Straub, Jeremy

2017-06-01

A wide variety of characteristics of 3D printed objects have been linked to impaired structural integrity and use-efficacy. The printing material can also have a significant impact on the quality, utility and safety characteristics of a 3D printed object. Material issues can be created by vendor issues, physical security issues and human error. This paper presents and evaluates a system that can be used to detect incorrect material use in a 3D printer, using visible light imaging. Specifically, it assesses the ability to ascertain the difference between materials of different color and different types of material with similar coloration.

Materials in the economy; material flows, scarcity, and the environment

Science.gov (United States)

Wagner, Lorie A.

2002-01-01

The importance of materials to the economy of the United States is described, including the levels of consumption and uses of materials. The paths (or flows) that materials take from extraction, through processing, to consumer products, and then final disposition are illustrated. Scarcity and environmental issues as they relate to the flow of materials are discussed. Examples for the three main themes of the report (material flows, scarcity, and the environment) are presented.

Love versus abuse: crossgenerational sexual relations of minors: a gay rights issue?

Science.gov (United States)

Graupner, H

1999-01-01

The question discussed is how far crossgenerational sexual relations with or by minors could be considered to be a gay rights issue. The author discusses the issue from the perspective of general principles found in the case-law of the European Court on Human Rights. These principles suggest that the basic right to privacy should be interpreted as providing comprehensive protection of the right of children and adolescents to sexual self-determination, namely both the right to effective protection from (unwanted) sex and abuse on the one hand and the right to (wanted) sex on the other. The analysis is based upon the findings of natural and social science as well as an extensive international survey of national legal provisions and it leads to the conclusion that consensual sexual relations of and with adolescents over 14 (out of relations of authority) should be qualified a gay rights issue; likewise (as the exception to the rule) the possibility of filtering out cases from prosecution where a contact/relation is proven (beyond reasonable doubt) as consensual and harmless even though the minor involved is under 14. The legalization of (objectively consensual) sexual relations with persons under 14 as such, however, should not be considered to be a gay rights issue.

Some critical issues in special needs education as they relate to ...

African Journals Online (AJOL)

The study examines five critical issues in special education as they relate to visual impairment vis a vis mercy killing (euthanasia), gender, seclusion, castration and genetic engineering. Literature in the five stated issues was reviewed to provide an insight into these areas with particular reference to visual impairment.

Assistance to States on Policies Related to Wind Energy Issues

Energy Technology Data Exchange (ETDEWEB)

Brown, Matthew, H; Decesaro, Jennifer; DOE Project Officer - Keith Bennett

2005-07-15

This final report summarizes work carried out under agreement with the US Department of Energy, related to wind energy policy issues. This project has involved a combination of outreach and publications on wind energy, with a specific focus on educating state-level policymakers. Education of state policymakers is vitally important because state policy (in the form of incentives or regulation) is a crucial part of the success of wind energy. State policymakers wield a significant influence over all of these policies. They are also in need of high quality, non-biased educational resources which this project provided. This project provided outreach to legislatures, in the form of meetings designed specifically for state legislators and legislative staff, responses to information requests on wind energy, and publications. The publications addressed: renewable energy portfolio standards, wind energy transmission, wind energy siting, case studies of wind energy policy, avian issues, economic development, and other related issues. These publications were distributed to legislative energy committee members, and chairs, legislative staff, legislative libraries, and other related state officials. The effect of this effort has been to provide an extensive resource of information about wind information for state policymakers in a form that is useful to them. This non-partisan information has been used as state policymakers attempt to develop their own policy proposals related to wind energy in the states.

Popper and Dingle on special relativity and the issue of symmetry

Science.gov (United States)

Dotson, Allen Clark

2012-02-01

Karl Popper and Herbert Dingle engaged in a fascinating debate concerning the kind of theory the special theory of relativity is. One of the issues was whether applications of the theory could be made consistent with the principle of relativity, a cornerstone of the theory itself. The principle of relativity seems to imply some sort of symmetry in results obtained for similar experiments as observed in two different inertial reference frames. Peter Hayes has recently dealt with the Dingle-Popper debate on this matter, as well as other issues. The present paper seeks to clarify what kind of symmetry is appropriate in a situation discussed by Popper, Dingle, and Hayes.

Practical issues relating to soil column chromatography for sorption parameter determination.

Science.gov (United States)

Bi, Erping; Schmidt, Torsten C; Haderlein, Stefan B

2010-08-01

Determination of sorption distribution coefficients (K(d)) of organic compounds by a dynamic soil column chromatography (SCC) method was developed and validated. Eurosoil 4, quartz, and alumina were chosen as exemplary packing materials. Heterocyclic aromatic compounds were selected in the validation of SCC. The prerequisites of SCC with regard to column dimension, packing procedure, and sample injection volume are discussed. Reproducible soil column packing was achieved by addition of a pre-column and an HPLC pump for subsequent compression of the packed material. Various methods to determine retention times from breakthrough curves are discussed and the use of the half mass method is recommended. To dilute soil with inert material can prevent column-clogging and help to complete experiments in a reasonable period of time. For the chosen probe compounds, quartz rather than alumina proved a suitable dilution material. Non-equilibrium issue can be overcome by conducting the experiments under different flowrates and/or performing numerical simulation. Copyright 2010 Elsevier Ltd. All rights reserved.

Relative consequences of transporting hazardous materials

International Nuclear Information System (INIS)

Fullwood, R.R.; Rhyne, W.R.; Simmons, J.A.; Reese, R.T.

1980-01-01

The objective of this paper is to discuss methods under study at Transportation Technology Center to develop a perspective on how technical measures of hazard and risk relate to perception of hazards, harm, and risks associated with transporting hazardous materials. This paper is concerned with two major aspects of the relative hazards problem. The first aspect is the analyses of the possible effects associated with exposure to hazardous materials as contained in the following two parts: outlines of possible problems and controversies that could be encountered in the evaluation and comparisons of hazards and risks; and description of the various measures of harm (hazards or dangers) and subsequent comparisons thereof. The second aspect of this paper leads into a presentation of the results of a study which had the following purposes: to develop analytical techniques for a consistent treatment of the phenomenology of the consequences of a release of hazardous materials; to reduce the number of variables in the consequence analyses by development of transportation accident scenarios which have the same meteorological conditions, demography, traffic and population densities, geographical features and other appropriate conditions and to develop consistent methods for presenting the results of studies and analyses that describe the phenomenology and compare hazards. The results of the study are intended to provide a bridge between analytical certainty and perception of the hazards involved. Understanding the differences in perception of hazards resulting from transport of various hazardous materials is fraught with difficulties in isolating the qualitative and quantitative features of the problem. By relating the quantitative impacts of material hazards under identical conditions, it is hoped that the perceived differences in material hazards can be delineated and evaluated

Materials challenges for ITER - Current status and future activities

Energy Technology Data Exchange (ETDEWEB)

Barabash, V. [ITER International Team, Boltsmannstrasse 2, 85748 Garching (Germany)]. E-mail: valdimir.barabash@iter.org; Peacock, A. [EFDA Close Support Unit, 85748 Garching (Germany); Fabritsiev, S. [D.V. Efremov Scientific Research Institute, 196641 St. Petersburg (Russian Federation); Kalinin, G. [ENES, P.O. Box 788, 101000 Moscow (Russian Federation); Zinkle, S. [Metals and Ceramics Division, ORNL, P.O. Box 2008, Oak Ridge, TN 37831-6138 (United States); Rowcliffe, A. [Metals and Ceramics Division, ORNL, P.O. Box 2008, Oak Ridge, TN 37831-6138 (United States); Rensman, J.-W. [NRG, P.O. Box 25, 1755 ZG Petten (Netherlands); Tavassoli, A.A. [Commissariat a l' Energie Atomique, CEA/Saclay, 91191 Gif sur Yvette cedex (France); Marmy, P. [CRPP, EPFL, Association EURATOM-Confederation Suisse, 5232, Villigen PSI (Switzerland); Karditsas, P.J. [EURATOM/UKAEA Fusion Association, Abingdon, Oxon OX14 3DB (United Kingdom); Gillemot, F. [AEKI Atomic Research Institute, 1121 Budapest, (Hungary); Akiba, M. [JAEA, Naka-machi, Naka-gun, Ibaraki-ken 311-0193 (Japan)

2007-08-01

ITER will be the first experimental fusion facility, which brings together the key physical, material and technological issues related to development of fusion reactors. The design of ITER is complete and the construction will start soon. This paper discusses the main directions of the project oriented materials activity and main challenges related to selection of materials for the ITER components. For each application in ITER the main materials issues were identified and these issues were addressed in the dedicated ITER R and D program. The justification of materials performance was fully documented, which allows traceability and reliability of design data. Several examples are given to illustrate the main achievements and recommendations from the recently updated ITER Materials Properties Handbook. The main ongoing and future materials activities are described.

Sustainable materials for low carbon buildings

OpenAIRE

B.V. Venkatarama Reddy

2009-01-01

This paper focuses on certain issues pertaining to energy, carbon emissions and sustainability of building construction with particular reference to the Indian construction industry. Use of sustainable natural materials in the past, related durability issues, and the implications of currently used energy-intensive materials on carbon emissions and sustainability are discussed. Some statistics on the Indian construction sector regarding materials produced in bulk quantities and the energy impl...

Nuclear materials management storage study

International Nuclear Information System (INIS)

Becker, G.W. Jr.

1994-02-01

The Office of Weapons and Materials Planning (DP-27) requested the Planning Support Group (PSG) at the Savannah River Site to help coordinate a Departmental complex-wide nuclear materials storage study. This study will support the development of management strategies and plans until Defense Programs' Complex 21 is operational by DOE organizations that have direct interest/concerns about or responsibilities for nuclear material storage. They include the Materials Planning Division (DP-273) of DP-27, the Office of the Deputy Assistant Secretary for Facilities (DP-60), the Office of Weapons Complex Reconfiguration (DP-40), and other program areas, including Environmental Restoration and Waste Management (EM). To facilitate data collection, a questionnaire was developed and issued to nuclear materials custodian sites soliciting information on nuclear materials characteristics, storage plans, issues, etc. Sites were asked to functionally group materials identified in DOE Order 5660.1A (Management of Nuclear Materials) based on common physical and chemical characteristics and common material management strategies and to relate these groupings to Nuclear Materials Management Safeguards and Security (NMMSS) records. A database was constructed using 843 storage records from 70 responding sites. The database and an initial report summarizing storage issues were issued to participating Field Offices and DP-27 for comment. This report presents the background for the Storage Study and an initial, unclassified summary of storage issues and concerns identified by the sites

The Now Frontier. Pioneer to Jupiter. Man Links Earth and Planets. Issue No. 1-5.

Science.gov (United States)

1973

This packet of space science instructional materials includes five issues related to the planet Jupiter. Each issue presents factual material about the planet, diagramatic representations of its movements and positions relative to bright stars or the earth, actual photographs and/or tables of data collected relevant to Pioneer 10, the spacecraft…

Safety issues of tooth whitening using peroxide-based materials.

Science.gov (United States)

Li, Y; Greenwall, L

2013-07-01

In-office tooth whitening using hydrogen peroxide (H₂O₂) has been practised in dentistry without significant safety concerns for more than a century. While few disputes exist regarding the efficacy of peroxide-based at-home whitening since its first introduction in 1989, its safety has been the cause of controversy and concern. This article reviews and discusses safety issues of tooth whitening using peroxide-based materials, including biological properties and toxicology of H₂O₂, use of chlorine dioxide, safety studies on tooth whitening, and clinical considerations of its use. Data accumulated during the last two decades demonstrate that, when used properly, peroxide-based tooth whitening is safe and effective. The most commonly seen side effects are tooth sensitivity and gingival irritation, which are usually mild to moderate and transient. So far there is no evidence of significant health risks associated with tooth whitening; however, potential adverse effects can occur with inappropriate application, abuse, or the use of inappropriate whitening products. With the knowledge on peroxide-based whitening materials and the recognition of potential adverse effects associated with the procedure, dental professionals are able to formulate an effective and safe tooth whitening regimen for individual patients to achieve maximal benefits while minimising potential risks.

Summary of workshop on materials issues in low emission boilers and high efficiency coal-fired cycles

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-01

The purpose of the workshop was to review with experts in the field the materials issues associated with two of the primary coal power systems being developed by the DOE Office of Fossil Energy. The DOE-FE Advanced Power Systems Program includes natural gas-based and coal-based power systems. Major activities in the natural gas-based power systems area include the Advanced Turbine Systems (ATS) Program, the Fuel Cells Program, and Hybrid Cycles. The coal-based power systems projects include the Low Emissions Boiler Systems (LEBS) Program, the High-Performance Power Systems Program (HIPPS), the Integrated (Coal) Gasification Combined-Cycle Program, and the Fluidized-Bed Combustion Program. This workshop focused on the materials issues associated with the LEBS and HIPPS technologies.

Issues related to development of Indian photovoltaic market

International Nuclear Information System (INIS)

Chaurey, A.; Laxminarayan, R.

1993-01-01

As is the case of most energy deficient countries in the tropics, India offers an enormous potential for use of photovoltaic (PV) systems. However, the demand in true commercial sense has not yet been created. The constraints for market development are not only related to the cost but also to several local parameters. The paper highlights these issues and constraints and suggests a market development strategy. (author)

Central unresolved issues in thermal energy storage for building heating and cooling

Energy Technology Data Exchange (ETDEWEB)

Swet, C.J.; Baylin, F.

1980-07-01

This document explores the frontier of the rapidly expanding field of thermal energy storage, investigates unresolved issues, outlines research aimed at finding solutions, and suggests avenues meriting future research. Issues related to applications include value-based ranking of storage concepts, temperature constraints, consistency of assumptions, nomenclature and taxonomy, and screening criteria for materials. Issues related to technologies include assessing seasonal storage concepts, diurnal coolness storage, selection of hot-side storage concepts for cooling-only systems, phase-change storage in building materials, freeze protection for solar water heating systems, and justification of phase-change storage for active solar space heating.

Accounting-related transmission issues

International Nuclear Information System (INIS)

Niehaus, M.; Bjorn, P.; Pate, G.

1999-01-01

Various initiatives have been undertaken by the Federal Energy Regulatory Commission (FERC) to deregulate wholesale electric energy markets. These initiatives have focused on restructuring the transmission systems in the US and recently have culminated in a proposal requiring formation of and participation in regional transmission organizations. The overall form of regulation selected to determine rates for transmission entities as well as underlying regulatory decisions reached on key issues will have profound implications for transmission entities. For example, traditional cost-based regulation would require one set of accounting and reporting rules, while incentive-based regulation may not be subject to those same rules. An overview of some of the major accounting and financial reporting issues that will need to be considered is presented

Labour Rights Protection in Industrial Relations Issues

Directory of Open Access Journals (Sweden)

Eko Adi Susanto

2015-12-01

Full Text Available Many violations of the terms of employment at Surabaya, employment protection  and working conditions for workers who are not provided by employers to the maximum, according to the legislation in force, while the legal protection for workers constrained because of the weakness in the system of employment law, both the substance and the culture built by governments and companies. How To Cite: Susanto, E. (2015. Labour Rights Protection in Industrial Relations Issues. Rechtsidee, 2(2, 109-120. doi:http://dx.doi.org/10.21070/jihr.v2i2.78

Environmental issues related to uranium mining

International Nuclear Information System (INIS)

Gorber, D.M.; Chambers, D.B.

1983-01-01

This paper introduces the environmental issues (both real and perceived) associated with uranium exploration, mining, milling, and tailings management. As well, some of the issues pertaining to the closeout of uranium tailings areas are discussed. These issues have received considerable attention in Canada in public inquiries and hearings that have been held across the country. The major conclusions of some of these hearings are also noted

Durability Issues and Challenges for Material Advancements in FRP Employed in the Construction Industry

Directory of Open Access Journals (Sweden)

Mariaenrica Frigione

2018-02-01

Full Text Available The use of fiber reinforced polymer (FRP composites for the rehabilitation of buildings or other infrastructure is increasingly becoming an effective and popular solution, being able to overcome some of the drawbacks experienced with traditional interventions and/or traditional materials. The knowledge of long-term performance and of durability behavior of FRP, in terms of their degradation/aging causes and mechanisms taking place in common as well as in harsh environmental conditions, still represents a critical issue for a safe and advantageous implementation of such advanced materials. The research of new and better performing materials in such fields is somewhat limited by practical and economical constrains and, as a matter of fact, is confined to an academic argument.

Resolving Radiological Classification and Release Issues for Many DOE Solid Wastes and Salvageable Materials

International Nuclear Information System (INIS)

Hochel, R.C.

1999-01-01

The cost effective radiological classification and disposal of solid materials with potential volume contamination, in accordance with applicable U.S. Department of Energy (DOE) Orders, suffers from an inability to unambiguously distinguish among transuranic waste, low-level waste, and unconditional-release materials in a generic way allowing in-situ measurement and verification. Depending on a material''s classification, disposal costs can vary by a hundred-fold. With these large costs at risk, the issues involved in making defensible decisions are ripe for closer scrutiny. In many cases, key issues can be easily resolved by a combination of process information, some simple measurements, and calculational predictions from a computer model for radiation shielding. The proper classification and disposal of many solid wastes requires a measurement regime that is able to show compliance with a variety of institutional and regulatory contamination limits. Ultimate responsibility for this, of course, rests with radiological control or health physics organization of the individual site, but there are many measurements which can be performed by operations and generation organizations to simplify the process and virtually guarantee acceptance. Although this is not possible for all potential solid wastes, there are many that do lend themselves to such measures, particularly some of large volumes and realizable cost savings. Mostly what is needed for this to happen are a few guiding rules, measurement procedures, and cross checks for potential pitfalls. Several examples are presented here and discussed that demonstrate the possibilities, including one which was successfully applied to bulk contamination

Addressing security issues related to virtual institute distributed activities

Science.gov (United States)

Stytz, Martin R.; Banks, Sheila B.

2008-03-01

One issue confounding the development and experimentation of distributed modeling and simulation environments is the inability of the project team to identify and collaborate with resources, both human and technical, from outside the United States. This limitation is especially significant within the human behavior representation area where areas such as cultural effects research and joint command team behavior modeling require the participation of various cultural and national representatives. To address this limitation, as well as other human behavior representation research issues, NATO Research and Technology Organization initiated a project to develop a NATO virtual institute that enables more effective and more collaborative research into human behavior representation. However, in building and operating a virtual institute one of the chief concerns must be the cyber security of the institute. Because the institute "exists" in cyberspace, all of its activities are susceptible to cyberattacks, subterfuge, denial of service and all of the vulnerabilities that networked computers must face. In our opinion, for the concept of virtual institutes to be successful and useful, their operations and services must be protected from the threats in the cyber environment. A key to developing the required protection is the development and promulgation of standards for cyber security. In this paper, we discuss the types of cyber standards that are required, how new internet technologies can be exploited and can benefit the promulgation, development, maintenance, and robustness of the standards. This paper is organized as follows. Section One introduces the concept of the virtual institutes, the expected benefits, and the motivation for our research and for research in this area. Section Two presents background material and a discussion of topics related to VIs, uman behavior and cultural modeling, and network-centric warfare. Section Three contains a discussion of the

Environmental Durability Issues for Solar Power Systems in Low Earth Orbit

Science.gov (United States)

Degroh, Kim K.; Banks, Bruce A.; Smith, Daniela C.

1994-01-01

Space solar power systems for use in the low Earth orbit (LEO) environment experience a variety of harsh environmental conditions. Materials used for solar power generation in LEO need to be durable to environmental threats such as atomic oxygen, ultraviolet (UV) radiation, thermal cycling, and micrometeoroid and debris impact. Another threat to LEO solar power performance is due to contamination from other spacecraft components. This paper gives an overview of these LEO environmental issues as they relate to space solar power system materials. Issues addressed include atomic oxygen erosion of organic materials, atomic oxygen undercutting of protective coatings, UV darkening of ceramics, UV embrittlement of Teflon, effects of thermal cycling on organic composites, and contamination due to silicone and organic materials. Specific examples of samples from the Long Duration Exposure Facility (LDEF) and materials returned from the first servicing mission of the Hubble Space Telescope (HST) are presented. Issues concerning ground laboratory facilities which simulate the LEO environment are discussed along with ground-to-space correlation issues.

Environmentally related taxes in OECD countries: issues and strategies

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

Economic instruments, including environmentally related taxes, play an increasing role in the environmental policies of developed countries. This publication addresses the use of environmental taxes and their effectiveness in reducing environmental damage. It finds these taxes are a powerful tool for implementing environmental strategy. It also describes obstacles to increased use of such taxes (e.g. concerns about competitiveness and distributional effects) and suggests ways to overcome such barriers. Particular attention is given to issues and options related to taxes on greenhouse gases. 18 figs., 13 tabs.

Issues related to EM management of DOE spent nuclear fuel

International Nuclear Information System (INIS)

Abbott, D.G.; Abashian, M.S.; Chakraborti, S.; Roberson, K.; Meloin, J.M.

1993-07-01

This document is a summary of the important issues involved in managing spent nuclear fuel (SNF) owned by the Department of Energy (DOE). Issues related to civilian SNF activities are not discussed. DOE-owned SNF is stored primarily at the Hanford Site, Idaho National Engineering Laboratory (INEL), Savannah River Site (SRS), Oak Ridge National Laboratory (ORNL), and West Valley Demonstration Project. Smaller quantities of SNF are stored at Brookhaven National Laboratory, Sandia National Laboratories, and Los Alamos National Laboratory (LANL). There is a wide variety of fuel types, including both low and high enrichment fuels from weapons production, DOE reactors, research and development programs, naval programs, and universities. Most fuel is stored in pools associated with reactor or reprocessing facilities. Smaller quantities are in dry storage. Physical conditions of the fuel range from excellent to poor or severely damaged. An issue is defined as an important question that must be answered or decision that must be made on a topic or subject relevant to achieving the complimentary objectives of (a) storing SNF in compliance with applicable regulations and orders until it can be disposed, and (b) safely disposing of DOE's SNF. The purpose of this document is to define the issues; no recommendations are made on resolutions. As DOE's national SNF management program is implemented, a system of issues identification, documentation, tracking, and resolution will be implemented. This document is an initial effort at issues identification. The first section of this document is an overview of issues that are common to several or all DOE facilities that manage SNF. The common issues are organized according to specific aspects of spent fuel management. This is followed by discussions of management issues that apply specifically to individual DOE facilities. The last section provides literature references

On the Issue of Labor Relations Discontinuance by Staff Reduction

Directory of Open Access Journals (Sweden)

Sheveleva A. A.

2012-11-01

Full Text Available This article is devoted to consideration of issues related to the procedure of labor law contract termination by staff reduction. The author, analyzing the judicial practice, gives practical recommendations on the procedure of employment relationships discontinuance

Framing Islam-related issues during GE13: An analysis of Malaysian mainstream newspapers

Directory of Open Access Journals (Sweden)

Aini Maznina A.Manaf

2015-06-01

Full Text Available Abstract: The two major political coalitions in Malaysia are Barisan Nasional  (BN and Pakatan Rakyat (PR, which are dominated by the Malay-Muslim majority. During the 13th national election, to gain public votes, the government used mainstream newspapers to frame Islam-related issues. This research focuses on the characterisation and information reported about Islam and Muslims during the 13th General Election. Using content analysis, we examine the coverage of such issues by the mainstream newspapers: Berita Harian, Utusan Malaysia, New Straits Times, and The Star. This analysis aims to provide a holistic review of the scope of the coverage during the period with a focus on how the Malaysian government framed Islam-related issues through the print media in order to gain the Malay votes. A total of 178 news articles were analysed, from which we found that 15 dominant issues were reported in the newspapers during that period. Among the most frequently reported Islam-related issues were hudud (prescribed punishments, Islamic state, and kalimah Allah (the word “Allah”, which were predominantly covered by the Malay newspapers. In addition, the data indicated that most of the news were inclined towards supporting the ruling coalition, i.e., Barisan Nasional.

U.S.-China Relations: Policy Issues

Science.gov (United States)

2011-01-12

global issues on which the Obama Administration has sought to work with China are the international financial crisis, climate change, and nuclear non-proliferation. In remarks in July 2009, President Obama declared that partnership between the United States and China was a prerequisite for progress on many of the most pressing global challenges. Continuing major bilateral issues in the relationship include trade and...into the Obama Administration, U.S. officials point to some successes in their efforts to work with China on global issues , including

NA Departmental Activities Related to Nuclear Materials for Advanced Reactor Systems

International Nuclear Information System (INIS)

Zeman, Andrej

2013-01-01

Overview of completed and ongoing coordinated research projects which address the following issues: (1) Better understanding of radiation effects and mechanisms of material damage and basic physics of accelerator irradiation under specific conditions, (2) Improvement of knowledge and data for the present and new generation of structural materials, (3) Contribution to developmental of theoretical models for radiation degradation mechanism, (4) Fostering of advanced and innovative technologies by support of Round Robin testing, collaboration and networking

The issue of safety in the transports of radioactive materials; Le probleme de la securite dans les transports de substances radioactives

Energy Technology Data Exchange (ETDEWEB)

Pallier, Lucien

1961-11-20

This report addresses and discusses the various hazards associated with transports of radioactive materials, their prevention, intervention measures, and precautions to be taken by rescuers, notably how these issues are addressed in regulations. For each of these issues, this report proposes guidelines, good practices, or procedures to handle the situation. The author first addresses hazards related to a transport of radioactive products: multiplicity of hazards, different hazards due to radioactivity, hazards due to transport modes, scale of dangerous doses. The second part addresses precautionary measures: for road transports, for air transports, for maritime transports, control procedures. The third part addresses the intervention in case of accident: case of a road accident with an unhurt or not vehicle crew, role of the first official rescuers, other kinds of accidents. The fourth part briefly addresses the case of transport of fissile materials. The fifth part discusses the implications of safety measures. Appendices indicate standards, and give guidelines for the construction of a storage building for radioactive products, for the control and storage of parcels containing radioactive products, and for the establishment of instructions for the first aid personnel.

Issues related to cooperative implementation mechanisms

International Nuclear Information System (INIS)

1998-01-01

This note by the secretariat seeks to focus discussions on some key issues regarding the design and functioning of the three new mechanisms, such as issues concerning mandates, cross-cutting as well as issues concerning individual mechanisms. The note addresses each mechanism separately in view of different origins, approaches, participants and possible applications. Reference is, however, made to similarities among the mechanisms, in particular where coordination of work on methodological and institutional issues and inter-institutional collaboration are concerned. The note suggests, in its concluding part, elements of a work programme up to and, to some extent, beyond COP 4. It draws upon the views submitted by Parties (document FCCC/SB/1998/MISC.1), contains reflections by the secretariat and builds on its consultations with other organizations having activities, under way or planned, that could contribute to the design or operation of the mechanisms. (au)

Gender issues in translation

OpenAIRE

ERGASHEVA G.I.

2015-01-01

The following research is done regarding gender in translation dealing specifically with the issue of the translators’ gender identity and its effect on their translations, as well as on how gender itself is translated and produced. We will try to clarify what gender is, how gender manifests itself in the system of language, and what problems translators encounter when translating or producing gender-related materials

GROUND WATER ISSUE: NONAQUEOUS PHASE LIQUIDS COMPATIBILITY WITH MATERIALS USED IN WELL CONSTRUCTION, SAMPLING, AND REMEDIATION.

Science.gov (United States)

This issue paper provides a comprehensive literature review regarding the compatibility of NAPLs with a wide variety of materials used at hazardous waste sites. A condensed reference table of compatibility data for 207 chemicals and 28 commonly used well construction and sampling...

Application of Radiation Chemistry to Some Selected Technological Issues Related to the Development of Nuclear Energy.

Science.gov (United States)

Bobrowski, Krzysztof; Skotnicki, Konrad; Szreder, Tomasz

2016-10-01

The most important contributions of radiation chemistry to some selected technological issues related to water-cooled reactors, reprocessing of spent nuclear fuel and high-level radioactive wastes, and fuel evolution during final radioactive waste disposal are highlighted. Chemical reactions occurring at the operating temperatures and pressures of reactors and involving primary transients and stable products from water radiolysis are presented and discussed in terms of the kinetic parameters and radiation chemical yields. The knowledge of these parameters is essential since they serve as input data to the models of water radiolysis in the primary loop of light water reactors and super critical water reactors. Selected features of water radiolysis in heterogeneous systems, such as aqueous nanoparticle suspensions and slurries, ceramic oxides surfaces, nanoporous, and cement-based materials, are discussed. They are of particular concern in the primary cooling loops in nuclear reactors and long-term storage of nuclear waste in geological repositories. This also includes radiation-induced processes related to corrosion of cladding materials and copper-coated iron canisters, dissolution of spent nuclear fuel, and changes of bentonite clays properties. Radiation-induced processes affecting stability of solvents and solvent extraction ligands as well oxidation states of actinide metal ions during recycling of the spent nuclear fuel are also briefly summarized.

Difficulties are multiplying - topical legal issues relating to nuclear waste disposal

International Nuclear Information System (INIS)

Strassburg, W.

1985-01-01

The report points out topical legal issues relating to nuclear waste disposal, yet leaves no doubt that the technical-scientific concept for nuclear waste disposal incorporated into the nuclear energy law in 1976 was a success. Nonetheless it is desirable that there should be persistent efforts especially on the part of parliament when issuing legislation or statutory orders to reach greater clearness and thus predictability in areas where technology has been proven by many years of practice. (orig./HSCH) [de

Information Operations, Electronic Warfare, and Cyberwar: Capabilities and Related Policy Issues

National Research Council Canada - National Science Library

Wilson, Clay

2007-01-01

.... It also suggests related policy issues of potential interest to Congress. For military planners, the control of information is critical to military success, and communications networks and computers are of vital operational importance...

Teeth and bones: applications of surface science to dental materials and related biomaterials

Science.gov (United States)

Jones, F. H.

2001-05-01

Recent years have seen a considerable upsurge in publications concerning the surface structure and chemistry of materials with biological or biomedical applications. Within the body, gas-solid interactions become relatively less significant and solid-liquid or solid-solid interfaces dominate, providing new challenges for the surface scientist. The current paper aims to provide a timely review of the use of surface analysis and modification techniques within the biomaterials field. A broad overview of applications in a number of related areas is given with particular attention focusing on those materials commonly encountered in dentistry and oral or maxillofacial implantology. Several specific issues of current interest are discussed. The interaction between synthetic and natural solids, both in the oral environment and elsewhere in the body is important in terms of adhesion, related stresses and strains and ultimately the longevity of a dental restoration, biomedical implant, or indeed the surrounding tissue. Exposure to body fluids, of course, can also affect stability, leading to the degradation or corrosion of materials within the body. Whilst this could potentially be harmful, e.g., if cytotoxic elements are released, it may alternatively provide a route to the preferential release of beneficial substances. Furthermore, in some cases, the controlled disintegration of a biomaterial is desirable, allowing the removal of an implant, e.g., without the need for further surgery. The presence of cells in the immediate bioenvironment additionally complicates the situation. A considerable amount of current research activity is targeted at the development of coatings or surface treatments to encourage tissue growth. If this is to be achieved by stimulating enhanced cell productivity, determination of the relationship between cell function and surface composition is essential.

New materials for next-generation commercial transports

National Research Council Canada - National Science Library

Committee on New Materials for Advanced Civil Aircraft, Commission on Engineering and Technical Systems, National Research Council

The major objective of this book was to identify issues related to the introduction of new materials and the effects that advanced materials will have on the durability and technical risk of future...

Mediation in the Belgian health care sector: analysis of a particular issue--the material scope of application of mediation.

Science.gov (United States)

Derèse, Marie-Noëlle

2011-06-01

In this paper, the material scope of application of mediation regulated in the Belgian Act of August 22nd, 2002 on Patient's Rights will be discussed in detail. In accordance with this Act, a mediator only has the competence to handle patients' complaints concerning the medical and care aspects of patients' rights, such as complaints relating to informed consent, access to medical files, etc. In practice, it has been observed that issues relating to administrative matters also give rise to complaints and that some patients do not know with whom they should lodge such complaints. Some clarification is necessary for a clear and proper complaints procedure that works. One possible solution is the creation of a single institution that would be in charge of handling both kinds of complaints. Such a solution has to be enacted in accordance with Belgian federalism.

Individual differences in children's materialism: the role of peer relations.

Science.gov (United States)

Banerjee, Robin; Dittmar, Helga

2008-01-01

Associations between materialism and peer relations are likely to exist in elementary school children but have not been studied previously. The first two studies introduce a new Perceived Peer Group Pressures (PPGP) Scale suitable for this age group, demonstrating that perceived pressure regarding peer culture (norms for behavioral, attitudinal, and material characteristics) can be reliably measured and that it is connected to children's responses to hypothetical peer pressure vignettes. Studies 3 and 4 evaluate the main theoretical model of associations between peer relations and materialism. Study 3 supports the hypothesis that peer rejection is related to higher perceived peer culture pressure, which in turn is associated with greater materialism. Study 4 confirms that the endorsement of social motives for materialism mediates the relationship between perceived peer pressure and materialism.

Resolving Radiological Classification and Release Issues for Many DOE Solid Wastes and Salvageable Materials

Energy Technology Data Exchange (ETDEWEB)

Hochel, R.C.

1999-11-19

The cost effective radiological classification and disposal of solid materials with potential volume contamination, in accordance with applicable U.S. Department of Energy (DOE) Orders, suffers from an inability to unambiguously distinguish among transuranic waste, low-level waste, and unconditional-release materials in a generic way allowing in-situ measurement and verification. Depending on a material''s classification, disposal costs can vary by a hundred-fold. With these large costs at risk, the issues involved in making defensible decisions are ripe for closer scrutiny. In many cases, key issues can be easily resolved by a combination of process information, some simple measurements, and calculational predictions from a computer model for radiation shielding. The proper classification and disposal of many solid wastes requires a measurement regime that is able to show compliance with a variety of institutional and regulatory contamination limits. Ultimate responsibility for this, of course, rests with radiological control or health physics organization of the individual site, but there are many measurements which can be performed by operations and generation organizations to simplify the process and virtually guarantee acceptance. Although this is not possible for all potential solid wastes, there are many that do lend themselves to such measures, particularly some of large volumes and realizable cost savings. Mostly what is needed for this to happen are a few guiding rules, measurement procedures, and cross checks for potential pitfalls. Several examples are presented here and discussed that demonstrate the possibilities, including one which was successfully applied to bulk contamination.

III-V nanoelectronics and related surface/interface issues

International Nuclear Information System (INIS)

Hasegawa, Hideki

2003-01-01

The conventional logic gate architecture is not suitable for high-density integration of quantum devices which are non-robust and extremely structure- and charge-sensitive. In this paper, our novel hexagonal binary-decision-diagram (BDD) quantum circuit approach for III-V nanoelectronics is reviewed and related critical surface/interface issues for high-density integration are discussed. First, the basic concept and actual implementation method of our approach are explained, giving examples of novel BDD quantum integrated circuits where nanowire networks are controlled by nanoscale Schottky wrap gates. For high-density integration, growth of embedded sub-10 nm III-V quantum wire networks by selective molecular beam epitaxy (MBE) on patterned substrates is described, including effects of atomic hydrogen irradiation and kinetic control of wire width. The key processing issue lies in understanding and control of nanostructure surfaces/interfaces. Behavior of nanoscale Schottky gates, recent scanning tunneling microscopy (STM)/scanning tunneling spectroscopy (STS) studies of surface states, and successful removal of surface states by MBE-grown silicon interface control layer are discussed

Introduction to the Special Issue: New and Interdisciplinary Approaches to Linguistic Relativity

Science.gov (United States)

Athanasopoulos, Panos; Bylund, Emanuel; Casasanto, Daniel

2016-01-01

This Special Issue of "Language Learning" presents an interdisciplinary state-of-the-art overview of current approaches to linguistic relativity. It contains empirical and theoretical studies and reflections on linguistic relativity from a variety of perspectives, such as associative learning, conceptual transfer, multilingual awareness,…

Plastic Recycling Experiments in Materials Education

Science.gov (United States)

Liu, Ping; Waskom, Tommy L.

1996-01-01

The objective of this project was to introduce a series of plastic recycling experiments to students in materials-related courses such as materials science, material technology and materials testing. With the plastic recycling experiments, students not only can learn the fundamentals of plastic processing and properties as in conventional materials courses, but also can be exposed to the issue of materials life cycle and the impact on society and environment.

Non-proliferation issues for the disposition of fissile materials using reactor alternatives

International Nuclear Information System (INIS)

Jaeger, C.D.; Duggan, R.A.; Tolk, K.M.

1996-01-01

The Department of Energy (DOE) is analyzing long-term storage on options for excess weapons-usable fissile materials. A number of the disposition alternatives are being considered which involve the use of reactors. The various reactor alternatives are all very similar and include front-end processes that could convert plutonium to a usable form for fuel fabrication, a MOX fuel fab facility, reactors to bum the MOX fuel and ultimate disposal of spent fuel in some geologic repository. They include existing, partially completed, advanced or evolutionary light water reactors and Canadian deuterium uranium (CANDU) reactors. In addition to the differences in the type of reactors, other variants on these alternatives are being evaluated to include the location and number of the reactors, the location of the mixed oxide (MOX) fabrication facility, the ownership of the facilities (private or government) and the colocation and/or separation of these facilities. All of these alternatives and their variants must be evaluated with respect to non-proliferation resistance. Both domestic and international safeguards support are being provided to DOE's Fissile Materials Disposition Program (FMDP) and includes such areas as physical protection, nuclear materials accountability and material containment and surveillance. This paper will focus on how the non-proliferation objective of reducing security risks and strengthening arms reduction will be accomplished and what some of the nonproliferation issues are for the reactor alternatives. Proliferation risk has been defined in terms of material form, physical environment, and the level of security and safeguards that is applied to the material. Metrics have been developed for each of these factors. The reactor alternatives will be evaluated with respect to these proliferation risk factors at each of the unit process locations in the alternative

Non-proliferation issues for the disposition of fissile materials using reactor alternatives

International Nuclear Information System (INIS)

Jaeger, C.D.; Duggan, R.A.; Tolk, K.M.

1996-01-01

The Department of Energy (DOE) is analyzing long-term storage imposition options for excess weapons-usable fissile materials. A number of the disposition alternatives are being considered which involve the use of reactors. The various reactor alternatives are all very similar and include front-end processes that could convert plutonium to a usable form for fuel fabrication, a MOX fuel fab facility, reactors to burn the MOX fuel and ultimate disposal of spent fuel in some geologic repository. They include existing, partially completed, advanced or evolutionary light water reactors and Canadian deuterium uranium (CANDU) reactors. In addition to the differences in the type of reactors, other variants on these alternatives are being evaluated to include the location and number of the reactors, the location of the mixed oxide (MOX) fabrication facility, the ownership of the facilities (private or government) and the colocation and/or separation of these facilities. All of these alternatives and their variants must be evaluated with respect to non-proliferation resistance. Both domestic and international safeguards support are being provided to DOE's Fissile Materials Disposition Program (FMDP) and includes such areas as physical protection, nuclear materials accountability and material containment and surveillance. This paper will focus on how the non-proliferation objective of reducing security risks and strengthening arms reduction will be accomplished and what some of the non-proliferation issues are for the reactor alternatives. Proliferation risk has been defined in terms of material form, physical environment, and the level of security and safeguards that is applied to the material. Metrics have been developed for each of these factors. The reactor alternatives will be evaluated with respect to these proliferation risk factors at each of the unit process locations in the alternative

Ethical issues in ageing and biography.

Science.gov (United States)

Kenyon, G M

1996-11-01

The increasing use of biographical materials in research and intervention in the field of ageing gives rise to significant ethical issues. In this inquiry, four of these issues are explicated. First, the notion of informed consent is explored in relation to selected contexts of research and intervention in ageing and biography. Second, the issues of autonomy and competence are considered from the point of view of identifying contexts where biography is a prerequisite for ethically responsive action. The third ethical issue concerns respecting the groundrules of various biographical approaches. Finally, the notions of authenticity and truth in lifestories are explored in an attempt to clarify the limitations and expectations of ageing and biography. The discussion of these ethical issues proceeds on the basis of an argument that indicates the fundamental importance of biographical ageing or the stories we are.

75 FR 62514 - Notice of Availability of Report on Data Access and Privacy Issues Related to Smart Grid...

Science.gov (United States)

2010-10-12

... DEPARTMENT OF ENERGY Notice of Availability of Report on Data Access and Privacy Issues Related to... report entitled, ``Data Access and Privacy Issues Related to Smart Grid Technologies.'' In this report... report entitled, ``Data Access and Privacy Issues Related to Smart Grid Technologies,'' DOE considered...

Outlook of the accident at Fukushima No.1 Nuclear Power Plants and issues concerning radioactive materials in environments

International Nuclear Information System (INIS)

Tanaka, Shun-ichi

2011-01-01

Fukushima No.1 Nuclear Power Plants (NPPs) affected by a great earthquake finally suffered reactor core meltdown with loss of all cooling capability and discharged a large amount of radioactive materials to the environment. Local areas in the northwest direction from NPPs were highly contaminated with radioactive materials. In order to reduce radiation exposure, several kinds of decontamination works had been tested in contaminated areas of primary school and kindergarten or residential houses with no evacuation. Radiation mini-hotspots were scattered. Contaminated soils and rubbles having cesium of high concentration in the order of several ten or hundreds kBq/kg were accumulated in large amounts of radioactive wastes and their disposal became a big issue. Related safety guidelines were proposed based on radioactive waste disposal for nuclear facilities as well as radiation dose control of neighboring residents and disposal workers, which would not be applicable to current state of Fukushima in a high radiation background. Establishment of new radiation protection rule was highly needed to deal with this emergency based on reality within and outside the Fukushima NPPs. (T. Tanaka)

Materials science issues of plasma source ion implantation

International Nuclear Information System (INIS)

Nastasi, M.; Faehl, R.J.; Elmoursi, A.A.

1996-01-01

Ion beam processing, including ion implantation and ion beam assisted deposition (IBAD), are established surface modification techniques which have been used successfully to synthesize materials for a wide variety of tribological applications. In spite of the flexibility and promise of the technique, ion beam processing has been considered too expensive for mass production applications. However, an emerging technology, Plasma Source Ion Implantation (PSII), has the potential of overcoming these limitations to become an economically viable tool for mass industrial applications. In PSII, targets are placed directly in a plasma and then pulsed-biased to produce a non-line-of-sight process for intricate target geometries without complicated fixturing. If the bias is a relatively high negative potential (20--100 kV) ion implantation will result. At lower voltages (50--1,200 V), deposition occurs. Potential applications for PSII are in low-value-added products such as tools used in manufacturing, orthopedic devices, and the production of wear coatings for hard disk media. This paper will focus on the technology and materials science associated with PSII

Containment-emergency-sump performance. Technical findings related to Unresolved Safety Issue A-43

International Nuclear Information System (INIS)

1983-04-01

This report summarizes key technical findings related to the Unresolved Safety Issue A-43, Containment Emergency Sump Performance, and provides recommendations for resolution of attendant safety issues. The key safety questions relate to: (a) effects of insulation debris on sump performance; (b) sump hydraulic performance as determined by design features, submergence, and plant induced effects, and (c) recirculation pump performance wherein air and/or particulate ingestion can occur. The technical findings presented in this report provide information relevant to the design and performance evaluation of the containment emergency sump

Competition in the Franchise Business. Instructor's Guide [and] Student Materials. Business Issues in the Classroom. Revised.

Science.gov (United States)

Maxey, Phyllis F.

One of a series of units designed to acquaint secondary students with business issues, this packet examines the franchise as a type of business organization. Teacher and student materials are provided in separate sections. The teacher's guide provides an overview, objectives, four detailed lesson plans, answer keys, background information, and…

What should Marxism materialism propose to International Relations?

Directory of Open Access Journals (Sweden)

Egni Malo

2014-07-01

Full Text Available To argue for the acknowledgment of the importance of historical materialism today when the cold-war and communism have for more than two decades ceased to exist it might create the perception of appearing dejected. Yet such a task which we attempt to take in this work is possible, if only because of the way that our actuality has depicted itself. One can argue for example that the significance of historical materialism as an elucidating method was never reliant on the success of the authoritarian regimes of communism that gave it a face of their own, any more than has traditional conservatism been dependent on social Darwinism, racist or/and aggressive regimes. Beyond this indication we argue of the possibility that historical materialism can be recognised as explanatory system, as one that in derivation and maturity has as its focus of analysis and particularly lays emphasis on what more than ever before governs our social world today, capitalism. The cold war proved the ground or rather the fit for concealing the social and economic divide and made that division namely in competing strategic interest: with the failure of communism and the freeing of historical materialism itself, IR might as well accept the degree to which socio-economic issues determined its agenda and policy of the west.

An exploration of issues relating to feminism and nurse education.

Science.gov (United States)

Millar, B; Biley, F C

1992-08-01

This paper explores the issue of feminism in relation to nursing and nurse education. As a result of this exploration, the authors suggest there is a need for a move away from traditional patriarchal approaches to nurse education, towards an educational programme based on empowerment principles that maximises the potential of feminine patterns of thinking.

Landlords and Tenants in Conflict. Instructor's Guide [and] Student Materials. Business Issues in the Classroom. Revised.

Science.gov (United States)

Maxey, Phyllis F.; Klener, Lois

One of a series of units on business issues designed for secondary school students, this packet focuses on the landlord-tenant relationship as it is affected by political and economic forces. A teacher's guide and student materials are provided in two separate sections. Following an overview of objectives and activities, the teacher's guide…

Information Retrieval System Design Issues in a Microcomputer-Based Relational DBMS Environment.

Science.gov (United States)

Wolfram, Dietmar

1992-01-01

Outlines the file structure requirements for a microcomputer-based information retrieval system using FoxPro, a relational database management system (DBMS). Issues relating to the design and implementation of such systems are discussed, and two possible designs are examined in terms of space economy and practicality of implementation. (15…

Current issues and related activities in seismic hazard analysis in Korea

Energy Technology Data Exchange (ETDEWEB)

Seo, Jeong-Moon [Korea Atomic Energy Research Inst., Taejon (Korea, Republic of); Lee, Jong-Rim; Chang, Chun-Joong

1997-03-01

This paper discusses some technical issues identified from the seismic hazard analyses for probabilistic safety assessment on the operating Korean nuclear power plants and the related activities to resolve the issues. Since there are no strong instrumental earthquake records in Korea, the seismic hazard analysis is mainly dependent on the historical earthquake records. Results of the past seismic hazard analyses show that there are many uncertainties in attenuation function and intensity level and that there is a need to improve statistical method. The identification of the activity of the Yangsan Fault, which is close to nuclear power plant sites, has been an important issue. But the issue has not been resolved yet in spite of much research works done. Recently, some capable faults were found in the offshore area of Gulupdo Island in the Yellow Sea. It is anticipated that the results of research on both the Yangsan Fault and reduction of uncertainty in seismic hazard analysis will have an significant influence on seismic design and safety assessment of nuclear power plants in the future. (author)

Current issues and related activities in seismic hazard analysis in Korea

International Nuclear Information System (INIS)

Seo, Jeong-Moon; Lee, Jong-Rim; Chang, Chun-Joong.

1997-01-01

This paper discusses some technical issues identified from the seismic hazard analyses for probabilistic safety assessment on the operating Korean nuclear power plants and the related activities to resolve the issues. Since there are no strong instrumental earthquake records in Korea, the seismic hazard analysis is mainly dependent on the historical earthquake records. Results of the past seismic hazard analyses show that there are many uncertainties in attenuation function and intensity level and that there is a need to improve statistical method. The identification of the activity of the Yangsan Fault, which is close to nuclear power plant sites, has been an important issue. But the issue has not been resolved yet in spite of much research works done. Recently, some capable faults were found in the offshore area of Gulupdo Island in the Yellow Sea. It is anticipated that the results of research on both the Yangsan Fault and reduction of uncertainty in seismic hazard analysis will have an significant influence on seismic design and safety assessment of nuclear power plants in the future. (author)

Nuclear power plant safety related pump issues

Energy Technology Data Exchange (ETDEWEB)

Colaccino, J.

1996-12-01

This paper summarizes of a number of pump issues raised since the Third NRC/ASME Symposium on Valve and Pump Testing in 1994. General issues discussed include revision of NRC Inspection Procedure 73756, issuance of NRC Information Notice 95-08 on ultrasonic flow meter uncertainties, relief requests for tests that are determined by the licensee to be impractical, and items in the ASME OM-1995 Code, Subsection ISTB, for pumps. The paper also discusses current pump vibration issues encountered in relief requests and plant inspections - which include smooth running pumps, absolute vibration limits, and vertical centrifugal pump vibration measurement requirements. Two pump scope issues involving boiling water reactor waterlog and reactor core isolation cooling pumps are also discussed. Where appropriate, NRC guidance is discussed.

Nuclear power plant safety related pump issues

International Nuclear Information System (INIS)

Colaccino, J.

1996-01-01

This paper summarizes of a number of pump issues raised since the Third NRC/ASME Symposium on Valve and Pump Testing in 1994. General issues discussed include revision of NRC Inspection Procedure 73756, issuance of NRC Information Notice 95-08 on ultrasonic flow meter uncertainties, relief requests for tests that are determined by the licensee to be impractical, and items in the ASME OM-1995 Code, Subsection ISTB, for pumps. The paper also discusses current pump vibration issues encountered in relief requests and plant inspections - which include smooth running pumps, absolute vibration limits, and vertical centrifugal pump vibration measurement requirements. Two pump scope issues involving boiling water reactor waterlog and reactor core isolation cooling pumps are also discussed. Where appropriate, NRC guidance is discussed

Introducing GaLA: Serious Game potentials, challenges and TEL-related issues

NARCIS (Netherlands)

Earp, Jeffrey; Klemke, Roland

2011-01-01

Earp, J., & Klemke, R. (2011, 21 September). Introducing GaLA: Serious Game potentials, challenges and TEL-related issues. Presented at TEL-Think-Tank Workshop at the 6th European conference on Technology enhanced learning: towards ubiquitous learning (EC-TEL 2011), Palermo, Italy.

Engineering approach to relative quantitative assessment of safety culture and related social issues in NPP operation

International Nuclear Information System (INIS)

Sivokon, V.; Gladyshev, M.; Malkin, S.

2005-01-01

The report is devoted to presentation of engineering approach and software tool developed for Safety Culture (SC) assessment as well as to the results of their implementation at Smolensk NPP. The engineering approach is logic evolution of the IAEA ASSET method broadly used at European NPPs in 90-s. It was implemented at Russian and other plants including Olkiluoto NPP in Finland. The approach allows relative quantitative assessing and trending the aspects of SC by the analysis of evens features and causes, calculation and trending corresponding indicators. At the same time plant's operational performances and related social issues, including efficiency of plant operation and personnel reliability, can be monitored. With the help of developed tool the joint team combined from personnel of Smolensk NPP and RRC 'Kurchatov Institute' ('KI') issued the SC self-assessment report, which identifies: families of recurrent events, main safety and operational problems ; their trends and importance to SC and plant efficiency; recommendations to enhance SC and operational performance

Social comparison, personal relative deprivation, and materialism.

Science.gov (United States)

Kim, Hyunji; Callan, Mitchell J; Gheorghiu, Ana I; Matthews, William J

2017-06-01

Across five studies, we found consistent evidence for the idea that personal relative deprivation (PRD), which refers to resentment stemming from the belief that one is deprived of deserved outcomes compared to others, uniquely contributes to materialism. In Study 1, self-reports of PRD positively predicted materialistic values over and above socioeconomic status, personal power, self-esteem, and emotional uncertainty. The experience of PRD starts with social comparison, and Studies 2 and 3 found that PRD mediated the positive relation between a tendency to make social comparisons of abilities and materialism. In Study 4, participants who learned that they had less (vs. similar) discretionary income than people like them reported a stronger desire for more money relative to donating more to charity. In Study 5, during a windfall-spending task, participants higher in PRD spent more on things they wanted relative to other spending categories (e.g., paying off debts). © 2016 The Authors. British Journal of Social Psychology published by John Wiley & Sons Ltd on behalf of British Psychological Society.

Current research issues related to post-wildfire runoff and erosion processes

Science.gov (United States)

Moody, John A.; Shakesby, Richard A.; Robichaud, Peter R.; Cannon, Susan H.; Martin, Deborah A.

2013-01-01

Research into post-wildfire effects began in the United States more than 70 years ago and only later extended to other parts of the world. Post-wildfire responses are typically transient, episodic, variable in space and time, dependent on thresholds, and involve multiple processes measured by different methods. These characteristics tend to hinder research progress, but the large empirical knowledge base amassed in different regions of the world suggests that it should now be possible to synthesize the data and make a substantial improvement in the understanding of post-wildfire runoff and erosion response. Thus, it is important to identify and prioritize the research issues related to post-wildfire runoff and erosion. Priority research issues are the need to: (1) organize and synthesize similarities and differences in post-wildfire responses between different fire-prone regions of the world in order to determine common patterns and generalities that can explain cause and effect relations; (2) identify and quantify functional relations between metrics of fire effects and soil hydraulic properties that will better represent the dynamic and transient conditions after a wildfire; (3) determine the interaction between burned landscapes and temporally and spatially variable meso-scale precipitation, which is often the primary driver of post-wildfire runoff and erosion responses; (4) determine functional relations between precipitation, basin morphology, runoff connectivity, contributing area, surface roughness, depression storage, and soil characteristics required to predict the timing, magnitudes, and duration of floods and debris flows from ungaged burned basins; and (5) develop standard measurement methods that will ensure the collection of uniform and comparable runoff and erosion data. Resolution of these issues will help to improve conceptual and computer models of post-wildfire runoff and erosion processes.

PWSCC issues and material aging management for nuclear power plants in Korea

Energy Technology Data Exchange (ETDEWEB)

Hwang, Seong Sik; Lim, Yun Soo; Kim, Dong Jin; Kim, Sung Woo; Kim, Hong Pyo [Nuclear Materials Research Division, Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2012-10-15

The primary water stress corrosion cracking (PWSCC) of alloy 600 in a PWR has been reported in the control rod drive mechanism (CRDM). Beginning in the mid-seventies, the pressurized water reactor (PWR) plants suffered from a sequence of SCC events mostly confined to S/G tubes, initially ODSCC, and then PWSCC. PWSCC was first reported in Bugey 3 vessel head penetration made of forged alloy 600 materials in September 1991. Other PWRs experienced cracking attributed to the PWSCC of the major primary side weld area made from alloy 182 at the end of the year 2000. Examples of dissimilar metal butt welds between the main austenitic stainless steel primary circuit piping and the outlet pressure vessel nozzles are the cracking of Ringhals 4, V. C. Summer and some J-groove welds of the CRDM of the RVH at Oconee 1. In addition to the Reactor Vessel Head (RVH), the PWSCC of alloy 182/82 has been reported at bottom mounted instrumentation (BMI) nozzle J-welds, steam generator(SG) J-weld drain nozzle, and SG tube sheet cladding. Two cases of boric acid precipitation were reported at the bottom head surface of a SG in Korea. Cracking was found in the cold leg drain nozzles made of alloy 600 in two units, hot side nozzles were fabricated with alloy 690 from the beginning. The cracking of steam generator tubings made of alloy 600 is another concern in Korea, because some plants still have alloy 600 HTMA tubings. The flow accelerated corrosion of secondary pipings is another type of corrosion problems, though it has not been treated as a severe problem in Korea. To properly manage the corrosion issues and seek out research items for maintaining the integrity of nuclear plants, the PRIMA-Net (Proactive Research and Innovative Material Aging Network) was organized in 2007. The research and development expert group consists of a National research laboratory (KAERI), regulatory body (KINS), utility (KHNP), engineering and design company (KEPCO EC), manufacturer (Doosan Heavy

University Intervention into Community Issues as Dialogic Public Relations: A Case Study

Science.gov (United States)

Byrne, Jamie M.

2007-01-01

This paper examines a study of the wastewater collection and treatment issues of Little Rock and North Little Rock, Arkansas by University of Arkansas at Little Rock personnel and how it constitutes dialogic public relations. The paper defines dialogic public relations using Kent and Taylor's work and then uses their criteria to describe how this…

Key issues in body armour: threats, materials and design

OpenAIRE

Horsfall, Ian

2012-01-01

This chapter will examine the mechanics and materials of body armour in military, police and some security related applications to protect the wearer from penetrative threats. These threats will include battlefield threats such as shell fragments and high velocity bullets, and threats to law enforcement personnel such as handgun bullets and knives. Regardless of whether the threat is a high velocity bullet, or a knife, the essential requirements of body armour are the same; first an interacti...

China-U.S. Relations: Current Issues and Implications for U.S. Policy

National Research Council Canada - National Science Library

Dumbaugh, Kerry

2007-01-01

.... policy makers have adopted tougher stances on issues involving China and U.S.-China relations, concerned about the impact of the PRC's strong economic growth and a more assertive international diplomacy...

Treatment, material, care, and patient-related factors in contact lens-related dry eye.

Science.gov (United States)

Ramamoorthy, Padmapriya; Sinnott, Loraine T; Nichols, Jason J

2008-08-01

To examine the effect of general contact lens and material characteristics, care solutions, treatment, and patient-related factors on contact lens-related dry eye. The data were derived from the Contact Lens and Dry Eye Study, designed as a cross-sectional and nested case-control study including 360 subjects. In separate statistical models, logistic regression was used to examine general contact lens characteristics, specific hydrogel lens materials, care solutions, and patient-related factors associated with dry eye status (controlled for age, gender, and current treatments). Several factors were significantly associated with dry eye, including treatment factors such as a recent contact lens refitting (odds ratios [OR] = 5.75, 95% confidence intervals [CI] = 2.14 to 15.46) and use of artificial tears/rewetting drops (OR = 1.09, 95% CI = 1.02 to 1.16), in addition, currently worn materials including Food and Drug Administration (FDA) group II (OR = 2.98, 95% CI = 1.14 to 6.19) and IV (OR = 1.87, 95% CI = 1.08 to 3.24). Significant patient-related factors included decreased overall satisfaction (OR = 3.57, 95% CI = 2.08 to 5.88,), dry eye in the absence of contact lens wear (OR = 6.54, 95% CI = 2.57 to 16.62), reduced daily lens wear duration (OR = 1.16, 95% CI = 1.06 to 1.26), and reduced ability to wear lenses as long as desired (OR = 2.44, 95% CI = 1.30 to 4.54). Care solutions were not associated with contact lens-related dry eye. The strong association of common treatment factors with dry eye status in contact lens wearers suggests that these treatments are not entirely effective. The use of high water content materials was strongly related to dry eye in lens wearers, whereas care solutions were not. Contact lens-related dry eye was also associated with several patient-related factors such as greater ocular discomfort (without lenses), dissatisfaction, and inability to wear lenses for desired durations.

High temperature materials and mechanisms

CERN Document Server

2014-01-01

The use of high-temperature materials in current and future applications, including silicone materials for handling hot foods and metal alloys for developing high-speed aircraft and spacecraft systems, has generated a growing interest in high-temperature technologies. High Temperature Materials and Mechanisms explores a broad range of issues related to high-temperature materials and mechanisms that operate in harsh conditions. While some applications involve the use of materials at high temperatures, others require materials processed at high temperatures for use at room temperature. High-temperature materials must also be resistant to related causes of damage, such as oxidation and corrosion, which are accelerated with increased temperatures. This book examines high-temperature materials and mechanisms from many angles. It covers the topics of processes, materials characterization methods, and the nondestructive evaluation and health monitoring of high-temperature materials and structures. It describes the ...

CORROSION ISSUES ASSOCIATED WITH AUSTENITIC STAINLESS STEEL COMPONENTS USED IN NUCLEAR MATERIALS EXTRACTION AND SEPARATION PROCESSES

Energy Technology Data Exchange (ETDEWEB)

Mickalonis, J.; Louthan, M.; Sindelar, R.

2012-12-17

This paper illustrated the magnitude of the systems, structures and components used at the Savannah River Site for nuclear materials extraction and separation processes. Corrosion issues, including stress corrosion cracking, pitting, crevice corrosion and other corrosion induced degradation processes are discussed and corrosion mitigation strategies such as a chloride exclusion program and corrosion release testing are also discussed.

Current Issues in the Neurology and Genetics of Learning-Related Traits and Disorders: Introduction to the Special Issue.

Science.gov (United States)

Gilger, Jeffrey W.

2001-01-01

This introductory article briefly describes each of the following eight articles in this special issue on the neurology and genetics of learning related disorders. It notes the greater appreciation of learning disability as a set of complex disorders with broad and intricate neurological bases and of the large individual differences in how these…

Material stabilization characterization management plan

International Nuclear Information System (INIS)

GIBSON, M.W.

1999-01-01

This document presents overall direction for characterization needs during stabilization of SNM at the Plutonium Finishing Plant (PFP). Technical issues for needed data and equipment are identified. Information on material categories and links to vulnerabilities are given. Comparison data on the material categories is discussed to assist in assessing the relative risks and desired processing priority

Design, materials and R and D issues of innovative thermal contact joints for high heat flux applications

International Nuclear Information System (INIS)

Federici, G.; Haines, J.; Tillack, M.S.; Ulrickson, M.

1995-01-01

Plasma facing components in fusion machines are designed with a layer of sacrificial armour material facing the plasma and a high-conductivity material in contact with the coolant. One of the most critical issues associated with making the proposed design concept work, from a power handling point of view, is achieving the necessary contact conductance between the armour and the heat sink.This paper presents a novel idea for the interface joint between the sacrificial armour and the actively cooled permanent heat sink. It consists of a thermal bond layer of a binary or more complex alloy, treated in the semi-solid region in such a way as to lead to a fine dispersion of a globular solid phase into a liquid matrix (rheocast process). The alloy in this ''mushy state'' exhibits a time-dependent, shear rate-dependent viscosity, which is maintained reversibly when the material is solidified and heated again in the semi-solid state. The function of the thermal bond layer is to facilitate heat transfer between the replaceable armour and the permanent heat sink without building up excessive thermal stresses, as in conventional brazed joints, and allow an easy replacement whenever needed without disturbing the coolant system. No contact pressure is required in this case to provide the desired heat transfer conductance, and the reversible thixotropic properties of the rheocast material should guarantee the stability of the layer in the semi-solid conditions.Key design, material and testing issues are identified and discussed in this paper with emphasis on specific needs for future research and development work. Examples of suitable material options which are being considered are reported together with some initial heat transfer analysis results. (orig.)

Communication from the Permanent Mission of the Russian Federation to the International Atomic Energy Agency regarding guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-12-10

The Director General of the International Atomic Energy Agency has received a Note Verbale from the Permanent Mission of the Russian Federation providing information on the export policies and practices of the Government of the Russian Federation with respect to the export of nuclear-related dual-use equipment, materials, software and related technology. In the light of the wish expressed at the end of the Note Verbale, the text of the Note Verbale is attached. The attachment to the Note Verbale was issued previously as INFCIRC/2541Rev. 4/Part 2.

Communication from the Permanent Mission of the Russian Federation to the International Atomic Energy Agency regarding guidelines for transfers of nuclear-related dual-use equipment, materials, software and related technology

International Nuclear Information System (INIS)

2001-01-01

The Director General of the International Atomic Energy Agency has received a Note Verbale from the Permanent Mission of the Russian Federation providing information on the export policies and practices of the Government of the Russian Federation with respect to the export of nuclear-related dual-use equipment, materials, software and related technology. In the light of the wish expressed at the end of the Note Verbale, the text of the Note Verbale is attached. The attachment to the Note Verbale was issued previously as INFCIRC/2541Rev. 4/Part 2

Issues in waste combustion

Energy Technology Data Exchange (ETDEWEB)

Gustavsson, Lennart; Robertson, Kerstin; Tullin, Claes [Swedish National Testing and Research Inst., Boraas (Sweden); Sundquist, Lena; Wrangensten, Lars [AaF-Energikonsult AB, Stockholm (Sweden); Blom, Elisabet [AaF-Processdesign AB, Stockholm (Sweden)

2003-05-01

The main purpose of this review is to provide an overview of the state-of-the-art on research and development issues related to waste combustion with relevance for Swedish conditions. The review focuses on co-combustion in grate and fluidised bed furnaces. It is primarily literature searches in relevant databases of scientific publications with to material published after 1995. As a complement, findings published in different report series, have also been included. Since the area covered by this report is very wide, we do not claim to cover the issues included completely and it has not been possitile to evaluate the referred studies in depth. Basic knowledge about combustion issues is not included since such information can be found elsewhere in the literature. Rather, this review should be viewed as an overview of research and development in the waste-to-energy area and as such we hope that it will inspire scientists and others to further work in relevant areas.

Allostatic Load: Single Parents, Stress-Related Health Issues, and Social Care

Science.gov (United States)

Johner, Randy L.

2007-01-01

This article explores the possible relationships between allostatic load (AL) and stress-related health issues in the low-income single-parent population, using both a population health perspective (PHP) and a biological framework. A PHP identifies associations among such factors as gender, income, employment, and social support and their…

The Asilomar Survey: Stakeholders' Opinions on Ethical Issues Related to Brain-Computer Interfacing.

Science.gov (United States)

Nijboer, Femke; Clausen, Jens; Allison, Brendan Z; Haselager, Pim

2013-01-01

Brain-Computer Interface (BCI) research and (future) applications raise important ethical issues that need to be addressed to promote societal acceptance and adequate policies. Here we report on a survey we conducted among 145 BCI researchers at the 4 th International BCI conference, which took place in May-June 2010 in Asilomar, California. We assessed respondents' opinions about a number of topics. First, we investigated preferences for terminology and definitions relating to BCIs. Second, we assessed respondents' expectations on the marketability of different BCI applications (BCIs for healthy people, BCIs for assistive technology, BCIs-controlled neuroprostheses and BCIs as therapy tools). Third, we investigated opinions about ethical issues related to BCI research for the development of assistive technology: informed consent process with locked-in patients, risk-benefit analyses, team responsibility, consequences of BCI on patients' and families' lives, liability and personal identity and interaction with the media. Finally, we asked respondents which issues are urgent in BCI research.

Issues Raised in Relation to Radioactive Waste Management

International Nuclear Information System (INIS)

Atherton, Elizabeth

2003-01-01

Nirex has undertaken various consultations with different stakeholders to identify their issues and concerns about radioactive waste management in general and specific aspects of Nirex's work. This paper will outline what dialogue techniques Nirex has undertaken and the issues and concerns that people have raised during the events. It will outline some of the work that Nirex is undertaking to address stakeholders' issues and concerns. Nirex has used a variety of dialogue techniques co-ordinated under the Nirex Involvement Programme to engage with stakeholders about the work we undertake. We are now trying to address the issues, concerns, scenarios and questions raised in our work programme. Key lessons that we have learned in undertaking the dialogues include: The importance of appropriate facilitation and organisation of meetings; The need for a clear purpose for meetings; Being flexible to the needs of the attendees and the issues they raise; Providing feedback to those who participate and following up issues. Through engaging with the public Nirex has learned that: Radioactive waste is not an everyday concern for people; The public can, will and want to engage with the issue of radioactive waste management. This includes engaging with the ethical debate. To facilitate this Nirex and others need to: Provide information in a neutral form outlining the pros and cons and including various people's opinions; Use proactive techniques to allow access and space for people to discuss the issues; Demonstrate how people's opinions have been taken into account. People understand the issues very differently to the way institutions understand them. There is a need for institutions to learn to understand public concerns and the ways in which the public understand issues, as well as for the public to understand the institutional positions better. We are using these insights to develop our future work in this area

Current issues relating to psychosocial job strain and cardiovascular disease research.

Science.gov (United States)

Theorell, T; Karasek, R A

1996-01-01

The authors comment on recent reviews of cardiovascular job strain research by P. L. Schnall and P. A. Landsbergis (1994), and by T. S. Kristensen (1995), which conclude that job strain as defined by the demand-control model (the combination of contributions of low job decision latitudes and high psychological job demands) is confirmed as a risk factor for cardiovascular mortality in a large majority of studies. Lack of social support at work appears to further increase risk. Several still-unresolved research questions are examined in light of recent studies: (a) methodological issues related to use of occupational aggregate estimations and occupational career aggregate assessments, use of standard scales for job analysis and recall bias issues in self-reporting; (b) confounding factors and differential strengths of association by subgroups in job strain-cardiovascular disease analyses with respect to social class, gender, and working hours; and (c) review of results of monitoring job strain-blood pressure associations and associated methodological issues.

Material efficiency: providing material services with less material production.

Science.gov (United States)

Allwood, Julian M; Ashby, Michael F; Gutowski, Timothy G; Worrell, Ernst

2013-03-13

Material efficiency, as discussed in this Meeting Issue, entails the pursuit of the technical strategies, business models, consumer preferences and policy instruments that would lead to a substantial reduction in the production of high-volume energy-intensive materials required to deliver human well-being. This paper, which introduces a Discussion Meeting Issue on the topic of material efficiency, aims to give an overview of current thinking on the topic, spanning environmental, engineering, economics, sociology and policy issues. The motivations for material efficiency include reducing energy demand, reducing the emissions and other environmental impacts of industry, and increasing national resource security. There are many technical strategies that might bring it about, and these could mainly be implemented today if preferred by customers or producers. However, current economic structures favour the substitution of material for labour, and consumer preferences for material consumption appear to continue even beyond the point at which increased consumption provides any increase in well-being. Therefore, policy will be required to stimulate material efficiency. A theoretically ideal policy measure, such as a carbon price, would internalize the externality of emissions associated with material production, and thus motivate change directly. However, implementation of such a measure has proved elusive, and instead the adjustment of existing government purchasing policies or existing regulations-- for instance to do with building design, planning or vehicle standards--is likely to have a more immediate effect.

Selected legal and institutional issues related to Ocean Thermal Energy Conversion (OTEC) development

Energy Technology Data Exchange (ETDEWEB)

Nanda, V. P.

1979-06-01

Ocean Thermal Energy Conversion (OTEC), an attractive alternative to traditional energy sources, is still in the early stages of development. To facilitate OTEC commercialization, it is essential that a legal and institutional framework be designed now so as to resolve uncertainties related to OTEC development, primarily involving jurisdictional, regulatory, and environmental issues. The jurisdictional issues raised by OTEC use are dependent upon the site of an OTEC facility and its configuration; i.e., whether the plant is a semipermanent fixture located offshore or a migrating plant ship that provides a source of energy for industry at sea. These issues primarily involve the division of authority between the Federal Government and the individual coastal states. The regulatory issues raised are largely speculative: they involve the adaptation of existing mechanisms to OTEC operation. Finally, the environmental issues raised center around compliance with the National Environmental Policy Act (NEPA) as well as international agreements. 288 references.

Mycotoxins in building materials

DEFF Research Database (Denmark)

Nielsen, Kristian Fog; Frisvad, Jens Christian

2011-01-01

as in future energy efficient buildings. It brings together different disciplinary points of view on indoor mold, ranging from physics and material science to microbiology and health sciences. The contents have been outlined according to three main issues: Fundamentals, particularly addressing the crucial...... roles of water and materials, Health, including a state-of-the-art description of the health-related effects of indoor molds, and Strategies, integrating remediation, prevention and policies....

Inter-organizational future proof EHR systems A review of the security and privacy related issues

NARCIS (Netherlands)

van der Linden, Helma; Kalra, Dipak; Hasman, Arie; Talmon, Jan

2009-01-01

OBJECTIVES: Identification and analysis of privacy and security related issues that occur when health information is exchanged between health care organizations. METHODS: Based on a generic scenario questions were formulated to reveal the occurring issues. Possible answers were verified in

Issues relating to the siting of tritium-fueled fusion experiments

International Nuclear Information System (INIS)

Reilly, H.J.; Holland, D.F.

1985-01-01

A preconceptual design study and safety analysis of the Tokamak Fusion Core Experiment (TFCX) was conducted in 1984 for the Department of Energy. This paper summarizes the calculations and comparisons related to TFCX siting and environmental issues such as radiological doses to the public living near the facility. Included are discussions of (a) routine and accidental releases of tritium, (b) routine releases of activated air, (c) direct radiation (including ''skyshine''), and (d) seismic criteria. Other potential issues are also discussed including the amount of tritium that might be retained in the graphite armor in the torus, the possible severity of magnet accidents, and the extent of damage due to plasma disruptions. The conclusions drawn from these calculations should be applicable to some of the other planned ignited core experiments that have operating parameters similar to those of TFCX

Issues relating to the siting of tritium-fueled fusion experiments

International Nuclear Information System (INIS)

Reilly, H.J.; Holland, D.F.

1985-01-01

A preconceptual design study and safety analysis of the Tokamak Fusion Core Experiment (TFCX) was conducted in 1984 for the Department of Energy. This paper summarizes the calculations and comparisons related to TFCX siting and environmental issues such as radiological doses to the public living near the facility. Included are discussions of (a) routine and accidental releases of tritium, (b) routine releases of activated air, (c) direct radiation (including skyshine), and (d) seismic criteria. Other potential issues are also discussed including the amount of tritium that might be retained in the graphite armor in the torus, the possible severity of magnet accidents, and the extent of damage due to plasma disruptions. The conclusions drawn from these calculations should be applicable to some of the other planned ignited core experiments that have operating parameters similar to those of TFCX

Islamic Religious Leaders in Israel as Social Agents for Change on Health-Related Issues.

Science.gov (United States)

Cohen-Dar, Michal; Obeid, Samira

2017-12-01

Islamic religious leaders (IRLs) have the potential to influence health education, health promotion, and positive health outcomes among their own communities. This study aims to examine the role and effectiveness of Arab Muslim religious leaders, in Israel, as social agents for change on health-related issues, focusing on reduction in infant mortality, prematurity, and congenital malformations attributed to consanguineous marriage. A self-administrated questionnaire was distributed to 127 IRLs, in 2012, to gain insights into practice, attitudes, and perceptions of IRLs toward their role as social agents for change on health-related issues. The results indicate that two-thirds (58%) of the surveyed IRLs have provided frequent advice on issues related to preventing infant mortality, congenital malformation, and prematurity over the past two years. Most IRLs indicated that they have keen interest in their communities' health matters (97%) and regard dealing with them as part of their job (85%). The study identified three enabling factors that had significant influence on the IRLs' attitude. These influences are: awareness and knowledge of the health issues, the perception that these issues and their impact on the community are part of their responsibility, and the empowerment they felt through the participation in the Ministry of Health (Northern Region Health Office) educational seminar series, in the year 2000. The main conclusion from this study indicates that IRLs are effective social agents for change and that the educational interventions can be a useful and effective strategy to encourage IRLs to cooperate with health providers and promote public health among their own communities.

Critical plasma-wall interaction issues for plasma-facing materials and components in near-term fusion devices

International Nuclear Information System (INIS)

Federici, G.; Coad, J.P.; Haasz, A.A.; Janeschitz, G.; Noda, N.; Philipps, V.; Roth, J.; Skinner, C.H.; Tivey, R.; Wu, C.H.

2000-01-01

The increase in pulse duration and cumulative run-time, together with the increase of the plasma energy content, will represent the largest changes in operation conditions in future fusion devices such as the International Thermonuclear Experimental Reactor (ITER) compared to today's experimental facilities. These will give rise to important plasma-physics effects and plasma-material interactions (PMIs) which are only partially observed and accessible in present-day experiments and will open new design, operation and safety issues. For the first time in fusion research, erosion and its consequences over many pulses (e.g., co-deposition and dust) may determine the operational schedule of a fusion device. This paper identifies the most critical issues arising from PMIs which represent key elements in the selection of materials, the design, and the optimisation of plasma-facing components (PFCs) for the first-wall and divertor. Significant advances in the knowledge base have been made recently, as part of the R and D supporting the engineering design activities (EDA) of ITER, and some of the most relevant data are reviewed here together with areas where further R and D work is urgently needed

Fundamental issues in the manufacturing of nanoelectromechanical (NEMS) and related nanosystems

International Nuclear Information System (INIS)

Singh, R.; Alapatt, G.F.; Gupta, N.; Poole, K.F.

2011-01-01

Nanostructures in dimension below about 10 nm show interesting properties because of the effect of low-dimension physics. However, to utilize these properties in practice to commercialize NEMS and related nano-systems require an extremely precise manufacturing process. This paper briefly evaluates the fundamental issues involved in manufacturing the nano-scale systems.

49 CFR 173.173 - Paint, paint-related material, adhesives, ink and resins.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Paint, paint-related material, adhesives, ink and... Than Class 1 and Class 7 § 173.173 Paint, paint-related material, adhesives, ink and resins. (a) When..., paint-related material, adhesives, ink and resins must be packaged as follows: (1) As prescribed in...

Ethical issues related to computerised family medical histories in sickle cell disease: Inforare.

Science.gov (United States)

Franrenet, Sandra; Duchange, Nathalie; Galactéros, Fréderic; Quantin, Catherine; Cohen, Olivier; Nzouakou, Ruben; Sudraud, Sophie; Hervé, Christian; Moutel, Grégoire

2010-10-01

The Inforare project aims to set up a system for the sharing of clinical and familial data, in order to study how genes are related to the severity of sickle cell disease. While the computerisation of clinical records represents a valuable research goal, an ethical framework is necessary to guarantee patients' protection and their rights in this developing field. Issues relating to patient information during the Inforare study were analysed by the steering committee. Several major concerns were discussed by the committee and formalized in the patients' information letter: educating patients to aid the recruitment of family members, rules of confidentiality and the disclosure of aggregate, individual and unexpected research results. This paper presents the main issues addressed.

Leveraging People-Related Maturity Issues for Achieving Higher Maturity and Capability Levels

Science.gov (United States)

Buglione, Luigi

During the past 20 years Maturity Models (MM) become a buzzword in the ICT world. Since the initial Crosby's idea in 1979, plenty of models have been created in the Software & Systems Engineering domains, addressing various perspectives. By analyzing the content of the Process Reference Models (PRM) in many of them, it can be noticed that people-related issues have little weight in the appraisals of the capabilities of organizations while in practice they are considered as significant contributors in traditional process and organizational performance appraisals, as stressed instead in well-known Performance Management models such as MBQA, EFQM and BSC. This paper proposes some ways for leveraging people-related maturity issues merging HR practices from several types of maturity models into the organizational Business Process Model (BPM) in order to achieve higher organizational maturity and capability levels.

THE PRACTICE OF ECT IN INDIA : ISSUES RELATING YO THE ADMINISTRATION OF ECT

OpenAIRE

Agarwal, A.K.; Andrade, Chittaranjan; Reddy, M. Venkataswamy

1992-01-01

A questionnaire on ECT, tapping altitudes, opinions and usage, was mailed to all medical members of the Indian Psychiatric Society whose addresses were known; 263 (28.8%) responded. This paper, the first in a series that presents the results of the survey, provides demographic data on the respondents and covers issues relating to the administration of ECT. Specific issues discussed include the ECT personnel, location of the ECT facility, certain ECT prescription patterns, psychiatrist-patient...

Communication from the Permanent Missions of Brazil and Romania to the International Atomic Energy Agency Regarding Guidelines for the Transfers of Nuclear-Related Dual-Use Equipment, Materials, Software and Related Technology

International Nuclear Information System (INIS)

2003-01-01

The Director General of the International Atomic Energy Agency has received Notes Verbale from the Permanent Missions of Brazil and Romania, dated 28 February 2003, providing information on the export policies and practices of the Governments of Brazil and Romania with respect to the export of nuclear-related dual-use equipment, materials, software and related technology. In the light of the wish expressed at the end of each Note Verbale, the text of the Notes Verbale is attached. The attachment referenced in the Note Verbale was issued previously as INFCIRC/254/Rev.5/Part 2

Finding online health-related information: usability issues of health portals.

Science.gov (United States)

Gurel Koybasi, Nergis A; Cagiltay, Kursat

2012-01-01

As Internet and computers become widespread, health portals offering online health-related information become more popular. The most important point for health portals is presenting reliable and valid information. Besides, portal needs to be usable to be able to serve information to users effectively. This study aims to determine usability issues emerging when health-related information is searched on a health portal. User-based usability tests are conducted and eye movement analyses are used in addition to traditional performance measures. Results revealed that users prefer systematic, simple and consistent designs offering interactive tools. Moreover, content and partitions needs to be shaped according to the medical knowledge of target users.

Sustainability and the issue of radioactive waste. A Third World perspective

International Nuclear Information System (INIS)

Perla de Alfaro, F.M.

2000-01-01

The case is made in this paper that a regulatory framework with regard to radioactive materials is a key aspect in moving El Salvador, and by the same token other Third World countries, to the goal of sustainability. Sustainable development is discussed, along with issues in relation to radioactive materials, the process and connections. (author)

Nuclide-related exemption limits for radioactive materials

International Nuclear Information System (INIS)

Przyborowski, S.; Scheler, R.

1984-01-01

A procedure has been proposed for setting nuclide-related exemption limits for radioactive materials. It consists in grading the radionuclides into 4 groups of radiotoxicity and assigning only one activity limit to each of them. Examples are given for about 200 radionuclides. The radiation exposures resulting from a continuous steady release of activity fractions or from short-period release of the entire activity were assessed to remain below 0.1 ALI in both of these borderline cases, thus justifying the license-free utilization of radioactive materials below the exemption limits. (author)

Multiple system responses program: Identification of concerns related to a number of specific regulatory issues

International Nuclear Information System (INIS)

Murphy, G.A.; Casada, M.L.; Palko, L.E.; Roberts, M.W.

1989-10-01

This document describes the activities and results of the Multiple System Responses (MSR) program conducted by the Nuclear Operations Analysis Center (NOAC) at Oak Ridge National Laboratory (ORNL). The objective of the MSR program was to gather and review documentation for several unresolved safety issues and related programs of interest, and from that documentation, describe any additional potential safety concerns. The MSR program provides information that will aid the NRC staff in making an assessment of the relative safety significance of the concerns through the established prioritization process. Judgments were not made regarding the validity of the concerns expressed by others. Rather, the concerns were documented and potential safety issues were developed and defined as specifically as possible. Twenty-one potential safety issues were developed from the documented concerns. Additional information was gathered to support the NRC efforts in reviewing these issues for prioritization. 73 refs., 2 tabs

Environmental health and hazardous waste issues related to the U.S.-Mexico border.

Science.gov (United States)

Carter, D E; Peña, C; Varady, R; Suk, W A

1996-06-01

Environmental health and environmental quality issues along the U.S.-Mexico border have been of concern for several years. The enactment of the North American Free Trade Agreement and the presence of the maquiladoras (foreign-owned industries using imported raw materials) have intensified those concerns recently. Efforts to assess these issues are complicated by the fact that many of the issues affecting the border region are within federal jurisdiction, but the problems are regional and local in nature. Thus, state and local governments become involved with public concerns about real and potential problems. One major problem is that environmental health data from this region are lacking, particularly from Mexico. Some new agencies such as the Border Environment Cooperation Commission, the United States-Mexico Border Health Commission, and the North American Commission on Environmental Cooperation have joined several existing agencies at the federal and state level to address environmental quality and health. Several studies have been initiated to determine air and water quality, but little is being done in the areas of hazardous waste and health assessment. Several problems are anticipated in the generation of such data, such as its format and accessibility. Data gaps and research needs are discussed.

Values and the Vote: Linking Issue Interpretations to the Process of Candidate Choice.

Science.gov (United States)

Shah, Dhavan V.; Domke, David; Wackman, Daniel B.

1997-01-01

Explores how "moral" issues interact with voters' core values. Finds that subjects' (military reservists, Reserve Officer Training Corps student members, and undergraduate students) interpretation of issues (as either ethical or material in nature) is strongly related to differences in the type of decision-making strategy used, even after…

Management of graphite material: a key issue for High Temperature Gas Reactor system (HTGR)

International Nuclear Information System (INIS)

Bourdeloie, C.; Marimbeau, P.; Robin, J.C.; Cellier, F.

2005-01-01

Graphite material is used in nuclear High Temperature Gas-cooled Reactors (HTGR, Fig.1) as moderator, thermal absorber and also as structural components of the core (Fig.2). This type of reactor was selected by the Generation IV forum as a potential high temperature provider for supplying hydrogen production plants and is under development in France in the frame of the AREVA ANTARES program. In order to select graphite grades to be used in these future reactors, the requirements for mechanical, thermal, physical-chemical properties must match the internal environment of the nuclear core, especially with regard to irradiation effect. Another important aspect that must be addressed early in design is the waste issue. Indeed, it is necessary to reduce the amount of nuclear waste produced by operation of the reactor during its lifetime. Preliminary assessment of the nuclear waste output for an ANTARES type 280 MWe HTGR over 60 year-lifetime gives an estimated 6000 m 3 of activated graphite waste. Thus, reducing the graphite waste production is an important issue for any HTGR system. First, this paper presents a preliminary inventory of graphite waste fluxes coming from a HTGR, in mass and volume, with magnitudes of radiological activities based on activation calculations of graphite during its stay in the core of the reactor. Normalized data corresponding to an output of 1 GWe.year electricity allows comparison of the waste production with other nuclear reactor systems. Second, possible routes to manage irradiated graphite waste are addressed in both the context of French nuclear waste management rules and by comparison to other national regulations. Routes for graphite waste disposal studied in different countries (concerning existing irradiated graphite waste) will be discussed with regard to new issues of large graphite waste from HTGR. Alternative or complementary solutions aiming at lowering volume of graphite waste to be managed will be presented. For example

Certification Issues Relating to ABDR

Science.gov (United States)

2010-05-01

design techniques, among them increased utilization of advanced fibre reinforced materials or advanced metal alloys with higher material allowables for...amount of approx. 30% in future, (Fig. 1.0-1), the wetted area will be made almost exclusively from thermoset composites like CFRP, which is used in...most cases as a combination of a high strength/modulus carbon fibre and a hot curing thermoset resin. A high percentage of modern fighter aircraft’s

Patients' Perspectives on Information and Communication About Sexual and Relational Issues in Rheumatology Health Care.

Science.gov (United States)

Helland, Ylva; Dagfinrud, Hanne; Haugen, Mona-Iren; Kjeken, Ingvild; Zangi, Heidi

2017-06-01

Men and women with rheumatic diseases report a significantly negative impact on multiple areas of life, including sexuality. Research indicates that patients want to discuss sexual issues with health professionals (HPs) in rheumatology care but these issues are rarely addressed in consultations. The objective of the present study was to explore patients' experiences of communication with HPs about disease-related sexual issues, their perceptions of the relevance of these issues in rheumatology care and their preferences for how these topics should be handled. A qualitative design was used and 18 semi-structured interviews were performed, including eight women and ten men with inflammatory rheumatic joint diseases, aged 29-62 years. The interviews were recorded and transcribed verbatim. Data were analysed thematically. Four main themes were derived from the interviews: (i) relevance of sexual issues; (ii) vital conditions for communication; (iii) individual preferences in mode and timing of information and communication; and (iv) benefits of information and communication. The participants expressed that, although sexual issues are relevant, necessary conditions for good communication are largely lacking. HPs' knowledge, experience and personal skills, as well as having sufficient time were essential. HPs lack of initiating sexual topics contributed to uncertainty about whether their sexual challenges were disease related and whether it was a legitimate topic to discuss in rheumatology care. Patients wanted HPs to possess knowledge about possible disease-related challenges in sexual life and intimate relationships, and to facilitate communication about these aspects. There is a need to develop practice guidelines to enable HPs to integrate sexual issues as an aspect of healthcare delivery in a patient-friendly manner. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Global Issues

Energy Technology Data Exchange (ETDEWEB)

Seitz, J.L.

2001-10-15

Global Issues is an introduction to the nature and background of some of the central issues - economic, social, political, environmental - of modern times. This new edition of this text has been fully updated throughout and features expanded sections on issues such as global warming, biotechnology, and energy. Fully updated throughout and features expanded sections on issues such as global warming, biotechnology, and energy. An introduction to the nature and background of some of the central issues - economic, social, political, environmental - of modern times. Covers a range of perspectives on a variety of societies, developed and developing. Extensively illustrated with diagrams and photographs, contains guides to further reading, media, and internet resources, and includes suggestions for discussion and studying the material. (author)

Pain-related psychological issues in hand therapy.

Science.gov (United States)

Hamasaki, Tokiko; Pelletier, René; Bourbonnais, Daniel; Harris, Patrick; Choinière, Manon

Literature review. Pain is a subjective experience that results from the modulation of nociception conveyed to the brain via the nervous system. Perception of pain takes place when potential or actual noxious stimuli are appraised as threats of injury. This appraisal is influenced by one's cognitions and emotions based on her/his pain-related experiences, which are processed in the forebrain and limbic areas of the brain. Unarguably, patients' psychological factors such as cognitions (eg, pain catastrophizing), emotions (eg, depression), and pain-related behaviors (eg, avoidance) can influence perceived pain intensity, disability, and treatment outcomes. Therefore, hand therapists should address the patient pain experience using a biopsychosocial approach. However, in hand therapy, a biomedical perspective predominates in pain management by focusing solely on tissue healing. This review aims to raise awareness among hand therapists of the impact of pain-related psychological factors. This literature review allowed to describe (1) how the neurophysiological mechanisms of pain can be influenced by various psychological factors, (2) several evidence-based interventions that can be integrated into hand therapy to address these psychological issues, and (3) some approaches of psychotherapy for patients with maladaptive pain experiences. Restoration of sensory and motor functions as well as alleviating pain is at the core of hand therapy. Numerous psychological factors including patients' beliefs, cognitions, and emotions alter their pain experience and may impact on their outcomes. Decoding the biopsychosocial components of the patients' pain is thus essential for hand therapists. Copyright © 2018 Hanley & Belfus. Published by Elsevier Inc. All rights reserved.

Materials data base as an interface between fusion reactor designs and materials development

International Nuclear Information System (INIS)

Ishino, S.; Iwata, S.

1983-01-01

The materials data base is an integrated information system of experimental and/or calculated data of materials being compiled to meet the broad needs for materials data by taking advantage of the data base management systems. In this paper the objective of such computerized data base is described from the viewpoint of materials engineers and fusion system designers. Materials data spread themselves widely from the field that relates fundamental understanding of the behaviors of electrons, atoms, vacancies, dislocations and so on to the performance of components, devices, machines and systems. In our approach this information is described as ''relations'' by a set of tables which comprise related variables, for example, a set of values about essential properties for materials selection. This approach based on the relational model enables relational operations, i.e. SELECTION, PROJECTION, JOIN and so on, to select suitable materials, to set trade-off parameters for system designers and to establish design criteria. Stored data comprise (i) fundamental properties for all elements and potential structural materials, (ii) low cycle fatigue, irradiation creep and swelling data for type 316 stainless steels. These data have been selected and evaluated from critical reviews of existing data base of about 2 mega bytes data, some examples of materials selections and extraction of trade-off parameters are shown as a subject of critical issue concerning how to bridge the large gap between materials developments and system designs. (author)

Health-equity issues related to childhood obesity: a scoping review.

Science.gov (United States)

Vargas, Clemencia M; Stines, Elsie M; Granado, Herta S

2017-06-01

The purpose of this scoping review was to determine the health-equity issues that relate to childhood obesity. Health-equity issues related to childhood obesity were identified by analyzing food environment, natural and built environment, and social environment. The authors searched Medline, PubMed, and Web of Science, using the keywords "children" and "obesity." Specific terms for each environment were added: "food desert," "advertising," "insecurity," "price," "processing," "trade," and "school" for food environment; "urban design," "land use," "transportation mode," "public facilities," and "market access" for natural and built environment; and "financial capacity/poverty," "living conditions," "transport access," "remoteness," "social support," "social cohesion," "working practices," "eating habits," "time," and "social norms" for social environment. Inclusion criteria were studies or reports with populations under age 12, conducted in the United States, and published in English in 2005 or later. The final search yielded 39 references (16 for food environment, 11 for built environment, and 12 for social environment). Most food-environment elements were associated with obesity, except food insecurity and food deserts. A natural and built environment that hinders access to physical activity resources and access to healthy foods increased the risk of childhood obesity. Similarly, a negative social environment was associated with childhood obesity. More research is needed on the effects of food production, living conditions, time for shopping, and exercise, as related to childhood obesity. Most elements of food, natural and built, and social-environments were associated with weight in children under age 12, except food insecurity and food deserts. © 2017 American Association of Public Health Dentistry.

Superconducting devices and materials. A literature survey issued quarterly, January-March 1980

International Nuclear Information System (INIS)

Olien, N.A.

1980-01-01

An extensive bibliography, i.e., over 200 pages of articles from 18 US and foreign journals, on superconducting devices and materials is presented. An author index is included. Upcoming conferences related to cryogenic research are listed

Nano materials for Medical and Dental Applications

International Nuclear Information System (INIS)

Yub Kwon, T.; Oh, D.S.; Narayanan, R.

2015-01-01

Welcome to this special issue. Nano science and nano technology concepts are applicable across all fields of science and a more widespread application of nano materials and nano technologies is imminent or already occurring in many areas, including health care. Today is scientists take those cutting-edge technologies and concepts and apply them to medicine and dentistry. They are finding a wide variety of ways to make medical and dental materials at the nano scale to take advantage of their enhanced physical and biological properties.The purpose of this special issue is to publish high-quality research papers as well as review articles addressing recent advances in the field of nano materials for medical and dental applications. A particular interest is given to papers exploring or discussing nano materials and nano technologies related to delivery system, bonding substitutes, and surface modification techniques applicable in these areas. For this special issue, several investigators were invited to contribute original research findings that can stimulate continuing efforts to understand the cutting-edge applications of nano materials in medicine and dentistry.

Safeguards issues of long-term waste management at DOE sites

International Nuclear Information System (INIS)

Pillay, K.K.S.

1992-06-01

Waste management at US Department of Energy (DOE) sites is not often regarded as a safeguard-sensitive step in the nuclear fuel cycle because the material concerned is relatively unattractive for diversion or theft. However, the accumulation of large amounts of fissile materials in wastes over a period of time can be a safeguards concern. One estimate shows that high-level and transuranic wastes and some miscellaneous radioactive materials at DOE sites may contain as much as 15 Mt of fissile materials. In the context of present US strategies for the disposal of these radioactive wastes, this study identifies safeguards issues relevant to proposed scenarios for the long-term management and permanent disposal of the above-mentioned waste forms in geologic repositories. This study points out areas of concern and the need to examine the issues before the wastes are processed for geologic disposal. Good waste management practices may offer unique opportunities to address the safeguards issues identified here. A judicious approach to examining the safeguards requirements of waste disposal programs may also contribute to DOE's new effort to establish and maintain public confidence in its environmental restoration programs

Resolution of the Task A-11 reactor-vessel materials-toughness safety issue. Appendices C-K

International Nuclear Information System (INIS)

1982-10-01

The central problem in the unresolved safety issue A-11, Reactor Vessel Materials Toughness, was to provide guidance in performing analyses required by 10 CFR Part 50, Appendix G, Section V.C. for reactor pressure vessels (RPVs) which fail to meet the toughness requirement during service life as a result of neutron radiation embrittlement. Although the methods of linear-elastic fracture mechanics (LEFM) were adequate for low-temperature RPV problems, they were inapplicable under operating conditions because vessel steels, even those which exhibit less than 50 ft-lb of C/sub v/ energy, were relatively tough at temperatures where the impact energy reached its upper shelf values. A technical team of recognized experts was organized to assist the NRC staff in addressing the problem. Using the foundation of the tearing modulus concept, which had been developed under earlier NRC sponsorship, relationships were obtained which provided approximate solutions to the problem of RPV fracture with assumed beltline region flaws. The first paper of this report is a summary of the problem, the solutions, and the results of verification analyses. The details are provided in a series of appendices in Volumes I and II

MAT-DB - A database for nuclear energy related materials data

International Nuclear Information System (INIS)

Over, H.H.

2009-01-01

The web-enabled materials database (Mat-DB) of JRC-IE has a long-term history in storing materials test data resulting from European and international research projects. The database structure and the user-guidance has bee permanently updated improved and optimized. The database is implemented in the secure ODIN portal: https://odin.jrc.ec.europa.eu of JRC-IE. This architecture guarantees fast access to confidential and public data and documentation which are stored in an inter-related document management database (DoMa). It is a part of JRC's nuclear knowledge management. Mat-DB hosts the whole pool of IAEA surveillance data of reactor pressure vessel materials from different nuclear power plants of the member states. Mat-DB contains also thousands of European GEN IV reactor systems related R and D materials data which are an important basis for the evaluating and extrapolating design data for candidate materials and setting up design rules covering high temperature exposure, irradiation and corrosion. Those data and rules would match also fusion related components. Mat-DB covers thermo-mechanical and thermo-physical properties data of engineering alloys at low, elevated and high temperatures for base materials and joints, including irradiated materials for nuclear fission and fusion applications, thermal barrier coated materials for gas turbines and properties of corroded materials. The corrosion part refers to weight gain/loss data of high temperature exposed engineering alloys and ceramic materials. For each test type the database structure reflects international test standards and recommendations. Mat-DB features an extensive library of evaluation programs for web-enabled assessment of uniaxial creep, fatigue, crack growth and high temperature corrosion properties. Evaluations can be performed after data retrieval or independently of Mat-DB by transferring other materials data in a given format to the programs. The fast evaluation processes help the user to

Compiler issues associated with safety-related software

International Nuclear Information System (INIS)

Feinauer, L.R.

1991-01-01

A critical issue in the quality assurance of safety-related software is the ability of the software to produce identical results, independent of the host machine, operating system, or compiler version under which the software is installed. A study is performed using the VIPRE-0l, FREY-01, and RETRAN-02 safety-related codes. Results from an IBM 3083 computer are compared with results from a CYBER 860 computer. All three of the computer programs examined are written in FORTRAN; the VIPRE code uses the FORTRAN 66 compiler, whereas the FREY and RETRAN codes use the FORTRAN 77 compiler. Various compiler options are studied to determine their effect on the output between machines. Since the Control Data Corporation and IBM machines inherently represent numerical data differently, methods of producing equivalent accuracy of data representation were an important focus of the study. This paper identifies particular problems in the automatic double-precision option (AUTODBL) of the IBM FORTRAN 1.4.x series of compilers. The IBM FORTRAN version 2 compilers provide much more stable, reliable compilation for engineering software. Careful selection of compilers and compiler options can help guarantee identical results between different machines. To ensure reproducibility of results, the same compiler and compiler options should be used to install the program as were used in the development and testing of the program

76 FR 52731 - On-Line Complaint Form for Service-Related Issues in Air Transportation

Science.gov (United States)

2011-08-23

... for Service-Related Issues in Air Transportation AGENCY: Office of the Secretary, Department of... consumer protection and civil rights laws and regulations related to air transportation. The Enforcement... travelers, and to ensure safe and adequate service in air transportation. Filing a complaint using a web...

Newly developed standard reference materials for organic contaminant analysis

Energy Technology Data Exchange (ETDEWEB)

Poster, D.; Kucklick, J.; Schantz, M.; Porter, B.; Wise, S. [National Inst. of Stand. and Technol., Gaithersburg, MD (USA). Center for Anal. Chem.

2004-09-15

The National Institute of Standards and Technology (NIST) has issued a number of Standard Reference Materials (SRM) for specified analytes. The SRMs are biota and biological related materials, sediments and particle related SRMs. The certified compounds for analysis are polychlorinated biphenyls (PCB), polycylic aromatic hydrocarbons (PAH) and their nitro-analogues, chlorinated pesticides, methylmercury, organic tin compounds, fatty acids, polybrominated biphenyl ethers (PBDE). The authors report on origin of materials and analytic methods. (uke)

17 CFR 230.488 - Effective date of registration statements relating to securities to be issued in certain business...

Science.gov (United States)

2010-04-01

... statements relating to securities to be issued in certain business combination transactions. 230.488 Section... REGULATIONS, SECURITIES ACT OF 1933 Investment Companies; Business Development Companies § 230.488 Effective date of registration statements relating to securities to be issued in certain business combination...

Readability of Spine-Related Patient Education Materials From Leading Orthopedic Academic Centers.

Science.gov (United States)

Ryu, Justine H; Yi, Paul H

2016-05-01

Cross-sectional analysis of online spine-related patient education materials from leading academic centers. To assess the readability levels of spine surgery-related patient education materials available on the websites of academic orthopedic surgery departments. The Internet is becoming an increasingly popular resource for patient education. Yet many previous studies have found that Internet-based orthopedic-related patient education materials from subspecialty societies are written at a level too difficult for the average American; however, no prior study has assessed the readability of spine surgery-related patient educational materials from leading academic centers. All spine surgery-related articles from the online patient education libraries of the top five US News & World Report-ranked orthopedic institutions were assessed for readability using the Flesch-Kincaid (FK) readability test. Mean readability levels of articles amongst the five academic institutions and articles were compared. We also determined the number of articles with readability levels at or below the recommended sixth- or eight-grade levels. Intraobserver and interobserver reliability of readability assessment were assessed. A total of 122 articles were reviewed. The mean overall FK grade level was 11.4; the difference in mean FK grade level between each department varied significantly (range, 9.3-13.4; P Online patient education materials related to spine from academic orthopedic centers are written at a level too high for the average patient, consistent with spine surgery-related patient education materials provided by the American Academy of Orthopaedic Surgeons and spine subspecialty societies. This study highlights the potential difficulties patients might have in reading and comprehending the information in publicly available education materials related to spine. N/A.

How Do Learners in Developed and Developing Countries Relate to Environmental Issues?

Science.gov (United States)

Trumper, Ricardo

2010-01-01

The present study was carried out in the framework of earlier research on environmental education for sustainability, using data collected in the ROSE Project. Attention was focused mainly on students' responses to sections and items related to environmental issues, regarding their countries' degree of development. The research questions dealt…

How would we deal with radiation related issues in high school educational programs?

Energy Technology Data Exchange (ETDEWEB)

Saeki, Kuniko [Attached High School of Akita Keizai Houka Univ., Akita (Japan)

1999-09-01

Current educational curriculum will be more improved and the materials in schools will be somewhat different by the year of 2002 when students have two days off in a week. It is a well known fact that recent Japanese people's level of understanding about Science and Technology is the second from the bottom among OECD nations and, as a matter of fact, few schools are dealing with scientific issues such as atomic energy or radiation. High school teachers need to survey what students know about atomic power and radiation, how deep they studied in previous schools and what kind of interest they have in conservation of world energy sources or environmental issues discussed today. Through questionnaires to 328 students, it became clear that they were most interesting to the effect of radiation or radioactivity on any kind of things in the environment, and that they want to know solutions for those problems such as greenhouse effect, ozone layers and Garbage disposal. (M. Suetake)

How would we deal with radiation related issues in high school educational programs?

International Nuclear Information System (INIS)

Saeki, Kuniko

1999-01-01

Current educational curriculum will be more improved and the materials in schools will be somewhat different by the year of 2002 when students have two days off in a week. It is a well known fact that recent Japanese people's level of understanding about Science and Technology is the second from the bottom among OECD nations and, as a matter of fact, few schools are dealing with scientific issues such as atomic energy or radiation. High school teachers need to survey what students know about atomic power and radiation, how deep they studied in previous schools and what kind of interest they have in conservation of world energy sources or environmental issues discussed today. Through questionnaires to 328 students, it became clear that they were most interesting to the effect of radiation or radioactivity on any kind of things in the environment, and that they want to know solutions for those problems such as greenhouse effect, ozone layers and Garbage disposal. (M. Suetake)

Data base on structural materials aging properties

International Nuclear Information System (INIS)

Oland, C.B.

1992-01-01

The US Nuclear Regulatory Commission has initiated a Structural Aging Program at the Oak Ridge National Laboratory to identify potential structural safety issues related to continued service of nuclear power plants and to establish criteria for evaluating and resolving these issues. One of the tasks in this program focuses on the establishment of a Structural Materials Information Center where long-term and environment-dependent properties of concretes and other structural materials are being collected and assembled into a data base. These properties will be used to evaluate the current condition of critical structural components in nuclear power plants and to estimate the future performance of these materials during the continued service period

Using Agent Based Distillation to Explore Issues Related to Asymmetric Warfare

Science.gov (United States)

2009-10-01

official definition of asymmetric warfare , considering that its use was redundant to irregular warfare [30]. 2 Such as the Lanchester Equations...RTP-MP-MSG-069 23 - 1 Using Agent Based Distillation to Explore Issues Related to Asymmetric Warfare Martin Adelantado, Jean-Michel Mathé...shows that both conventional and asymmetric warfare are characterised by nonlinear behaviours and that engagement is a Complex Adaptive System (CAS

Report of the Material Control and Material Accounting Task Force: blueprint for the future

International Nuclear Information System (INIS)

1978-03-01

A blueprint is presented for the development of improved material control and material accounting systems by integrating the goals and capabilities of material control and material accounting and recommending specific upgrading actions. An analysis is included of several specific issues and developing recommendations for future actions related to those issues. It is felt that there is a need for a program to define specific quantified goals for an integrated safeguards program, and to monitor safeguards programs in terms of these goals. NRC should give highest priority to developing regulations and guides that will enable material control to make a greater contribution to safeguards by providing greater timeliness and sensitivity in detecting and assessing material losses. It is recommended that a technical study be conducted to determine a quantitative measure or at least a figure of merit for the effectiveness of a security clearance program, based upon full field background investigations, in protecting against malevolent conspiracies involving two or more security cleared individuals. It is also recommended that a specific effort be initiated to formulate an approach to combating collusion. This effort should specifically consider the contribution that material control and material accounting programs can make to safeguards effectiveness in this area

Progress in 3D Printing of Carbon Materials for Energy-Related Applications.

Science.gov (United States)

Fu, Kun; Yao, Yonggang; Dai, Jiaqi; Hu, Liangbing

2017-03-01

The additive-manufacturing (AM) technique, known as three-dimensional (3D) printing, has attracted much attention in industry and academia in recent years. 3D printing has been developed for a variety of applications. Printable inks are the most important component for 3D printing, and are related to the materials, the printing method, and the structures of the final 3D-printed products. Carbon materials, due to their good chemical stability and versatile nanostructure, have been widely used in 3D printing for different applications. Good inks are mainly based on volatile solutions having carbon materials as fillers such as graphene oxide (GO), carbon nanotubes (CNT), carbon blacks, and solvent, as well as polymers and other additives. Studies of carbon materials in 3D printing, especially GO-based materials, have been extensively reported for energy-related applications. In these circumstances, understanding the very recent developments of 3D-printed carbon materials and their extended applications to address energy-related challenges and bring new concepts for material designs are becoming urgent and important. Here, recent developments in 3D printing of emerging devices for energy-related applications are reviewed, including energy-storage applications, electronic circuits, and thermal-energy applications at high temperature. To close, a conclusion and outlook are provided, pointing out future designs and developments of 3D-printing technology based on carbon materials for energy-related applications and beyond. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Current technical issues in international safeguards

International Nuclear Information System (INIS)

Bennett, C.A.

1977-01-01

Safeguards systems, and the associated need for technical and systems development, reflect changing conditions and concerns associated with the nuclear fuel cycle and the safety and security of nuclear materials and facilities. In particular, the implementation of international safeguards has led to the recognition of certain technical issues, both old and new, which are in need of resolution. These are: 1. The grading of nuclear materials and facilities with respect to their relative safeguards significance. 2. The extension and upgrading of safeguards techniques to maintain adequate protection in view of constantly increasing amounts of material to be safeguarded. 3. The balance between safeguards mechanisms based on physical protection and material accounting, and the role of surveillance and containment in each case. 4. The role of information systems as a basis for both analytical feedback and the determination of the factors affecting system effectiveness and their interrelationship. 5. A determination of the degree to which the overall technical effectiveness of international inspection activities can be quantified. Each of these technical issues must be considered in light of the specific objectives of international safeguards, which differ from domestic safeguards in terms of the level of the threat, the safeguards mechanisms available, and the diversion strategies assumed. Their resolution in this international context is essential if the effectiveness and viability of international safeguards are to be maintained

Proliferation resistance criteria for fissile material disposition issues

International Nuclear Information System (INIS)

Rutherford, D.A.; Fearey, B.L.; Markin, J.T.; Close, D.A.; Tolk, K.M.; Mangan, D.L.; Moore, L.

1995-01-01

The 1994 National Acdaemy of Sciences study ''Management and Disposition of Excess Weapons Plutonium'' defined options for reducing the national and international proliferation risks of materials declared excess to the nuclear weapons program. This paper proposes criteria for assessing the proliferation resistance of these options as well defining the ''Standards'' from the report. The criteria are general, encompassing all stages of the disposition process from storage through intermediate processing to final disposition including the facilities, processing technologies and materials, the level of safeguards for these materials, and the national/subnational threat to the materials

Waste management regulatory compliance issues related to D ampersand D activities at Oak Ridge National Laboratory (ORNL)

International Nuclear Information System (INIS)

Hitch, J.P.; Arnold, S.E.; Burwinkle, T.; Daugherty, D.

1994-01-01

The waste management activities at ORNL related to the decontamination and decommissioning (D ampersand D) of radioactively contaminated buildings are divided into four categories: Operational facilities, inactive or surplus facilities, future facilities planning, and D ampersand D activities. This paper only discusses regulatory issues related to inactive or surplus facilities. Additionally, rather than attempting to address all resulting waste streams and related regulations, this paper highlights only a few of the ORNL waste streams that present key regulatory issues

Tritium retention in candidate next-step protection materials: engineering key issues and research requirements

International Nuclear Information System (INIS)

Federici, G.; Andrew, P.L.; Wu, C.H.

1995-01-01

Although a considerable volume of valuable data on the behaviour of tritium in beryllium and carbon-based armours exposed to hydrogenic fusion plasmas has been compiled over the past years both from operation of present-day tokamaks and from laboratory simulations, knowledge is far from complete and tritium inventory predictions for these materials remain highly uncertain. In this paper we elucidate the main mechanisms responsible for tritium trapping and release in next-step D-T tokamaks, as well as the applicability of some of the presently known data bases for design purposes. Owing to their strong anticipated implications on tritium uptake and release, attention is focused mainly on the interaction of tritium with neutron damage induced defects, on tritium codeposition with eroded carbon and on the effects of oxide and surface contaminants. Some preliminary quantitative estimates are presented based on most recent experimental findings and latest modelling developments as well. The influence of important working conditions such as target temperature, loading particle fluxes, erosion and redeposition rates, as well as material characteristics such as the type of morphology of the protection material (i.e. amorphous plasma-sprayed beryllium vs. solid forms), and design dependent parameters are discussed in this paper. Remaining issues which require additional effort are identified. (orig.)

Differences in Moral Judgment on Animal and Human Ethics Issues between University Students in Animal-Related, Human Medical and Arts Programs.

Science.gov (United States)

Verrinder, Joy M; Ostini, Remo; Phillips, Clive J C

2016-01-01

Moral judgment in relation to animal ethics issues has rarely been investigated. Among the research that has been conducted, studies of veterinary students have shown greater use of reasoning based on universal principles for animal than human ethics issues. This study aimed to identify if this was unique to students of veterinary and other animal-related professions. The moral reasoning of first year students of veterinary medicine, veterinary technology, and production animal science was compared with that of students in non-animal related disciplines of human medicine and arts. All students (n = 531) completed a moral reasoning test, the VetDIT, with animal and human scenarios. When compared with reasoning on human ethics issues, the combined group of students evaluating animal ethics issues showed higher levels of Universal Principles reasoning, lower levels of Personal Interest reasoning and similar levels of Maintaining Norms reasoning. Arts students showed more personal interest reasoning than students in most animal-related programs on both animal and human ethics issues, and less norms-based reasoning on animal ethics issues. Medical students showed more norms-based reasoning on animal ethics issues than all of the animal-related groups. There were no differences in principled reasoning on animal ethics issues between program groups. This has implications for animal-related professions and education programs showing that students' preference for principled reasoning on animal ethics issues is not unique to animal-related disciplines, and highlighting the need to develop student (and professional) capacity to apply principled reasoning to address ethics issues in animal industries to reduce the risk of moral distress.

Differences in Moral Judgment on Animal and Human Ethics Issues between University Students in Animal-Related, Human Medical and Arts Programs

Science.gov (United States)

Verrinder, Joy M.; Ostini, Remo; Phillips, Clive J. C.

2016-01-01

Moral judgment in relation to animal ethics issues has rarely been investigated. Among the research that has been conducted, studies of veterinary students have shown greater use of reasoning based on universal principles for animal than human ethics issues. This study aimed to identify if this was unique to students of veterinary and other animal-related professions. The moral reasoning of first year students of veterinary medicine, veterinary technology, and production animal science was compared with that of students in non-animal related disciplines of human medicine and arts. All students (n = 531) completed a moral reasoning test, the VetDIT, with animal and human scenarios. When compared with reasoning on human ethics issues, the combined group of students evaluating animal ethics issues showed higher levels of Universal Principles reasoning, lower levels of Personal Interest reasoning and similar levels of Maintaining Norms reasoning. Arts students showed more personal interest reasoning than students in most animal-related programs on both animal and human ethics issues, and less norms-based reasoning on animal ethics issues. Medical students showed more norms-based reasoning on animal ethics issues than all of the animal-related groups. There were no differences in principled reasoning on animal ethics issues between program groups. This has implications for animal-related professions and education programs showing that students’ preference for principled reasoning on animal ethics issues is not unique to animal-related disciplines, and highlighting the need to develop student (and professional) capacity to apply principled reasoning to address ethics issues in animal industries to reduce the risk of moral distress. PMID:26934582

Communications issues for international radioactive materials transport, Post 9/11

Energy Technology Data Exchange (ETDEWEB)

Brown, A.A. [International Transport, BNFL, Warrington, Cheshire (United Kingdom); Hartenstein, M. [Transport External Affairs, Marketing, Sales and Projects Div., Cogema Logistics, Saint Quentin en Yvelines (France); Nawano, M. [Transport Headquarters, Overseas Reprocessing Committee, Tokyo (Japan)

2004-07-01

The terrorist attacks of September 11{sup th} 2001 in New York and Washington (9/11) have increased government, public and media concern over terrorist attacks in general and attack on transport systems in particular. Antinuclear groups have increasingly made unsubstantiated claims about the terrorist threat to Radioactive Materials Transport and the consequences of such a threat being realised. At the same time, the international and national security regulations relating to Nuclear Materials Transport have been reviewed and tightened since 9/11. These changes have in some cases restricted the information that can be made publicly available. It is against this background that the Industry must operate and seek to inform the public through its communications activities whilst remaining within the new security framework of security regulations. These activities must necessarily provide sufficient information to counter the incorrect claims made by opponents, allay fears of the public as far as possible and provide factual and scientifically rigorous data without compromising security.

Communications issues for international radioactive materials transport, Post 9/11

International Nuclear Information System (INIS)

Brown, A.A.; Hartenstein, M.; Nawano, M.

2004-01-01

The terrorist attacks of September 11 th 2001 in New York and Washington (9/11) have increased government, public and media concern over terrorist attacks in general and attack on transport systems in particular. Antinuclear groups have increasingly made unsubstantiated claims about the terrorist threat to Radioactive Materials Transport and the consequences of such a threat being realised. At the same time, the international and national security regulations relating to Nuclear Materials Transport have been reviewed and tightened since 9/11. These changes have in some cases restricted the information that can be made publicly available. It is against this background that the Industry must operate and seek to inform the public through its communications activities whilst remaining within the new security framework of security regulations. These activities must necessarily provide sufficient information to counter the incorrect claims made by opponents, allay fears of the public as far as possible and provide factual and scientifically rigorous data without compromising security

Mixing of immiscible fluids in chaotic flows and related issues

International Nuclear Information System (INIS)

Ottino, J.M.

1993-01-01

The basis goal of this work was to obtain a basic understanding of mixing of immiscible fluids leading to the determination of flow conditions which result in efficient breakup and dispersion of one mass of fluid in the bulk of another. Related issues were the prediction of the morphological structures and drop size distribution for a given set of operating conditions. The primary motivation for these investigations was to produce basic knowledge leading to increased understanding of industrial processes involving blending, agitation, emulsification, and dissolution

How Older Adults and Their Families Perceive Family Talk about Aging-Related EOL Issues: A Dialectical Analysis.

Science.gov (United States)

Egbert, Nichole; Child, Jeffrey T; Lin, Mei-Chen; Savery, Carol; Bosley, Tammy

2017-04-17

For older adults, approaching end-of-life (EOL) brings unique transitions related to family relationships. Unfortunately, most families greatly underestimate the need to discuss these difficult issues. For example, parents approaching EOL issues often struggle with receiving assistance from others, avoiding family conflict, and maintaining their sense of personhood. In addition, discussions of EOL issues force family members to face their parents' mortality, which can be particularly difficult for adult children to process emotionally. This study explored aging issues identified by aging parents and their families as they traverse these impending EOL changes. Ten focus groups of seniors ( n = 65) were conducted. Focus groups were organized according to race (African-American/European-American), gender, and whether the older adult was living independently or in an assisted care facility. When asked open-ended questions about discussing aging and EOL issues with family members, participants revealed tensions that led us to consider Relational Dialectics Theory as a framework for analysis. The predominant tension highlighted in this report was certainty versus uncertainty, with the two sub-themes of sustained life versus sustained personhood and confronting versus avoiding EOL issues. For these data, there were more similarities than differences as a result of gender, race, or living situation than one might expect, although culture and financial status were found to be influential in the avoidance of EOL discussions. The results of this study help to provide additional insight into relational dialectics related to aging, EOL, and the importance of communication in facilitating family coping.

Safety of transport of radioactive material. Contributed papers

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

Radioactive material has been transported for decades within and between countries as the use of radioactive material to benefit mankind has expanded. The transport can involve many types of materials (radionuclides and radiation sources for applications in agriculture, energy production, industry, and medicine) and all modes of transport (road, rail, sea and waterways, and air). Among the organizations in the United Nations system, the International Atomic Energy Agency (IAEA) has the statutory function to establish or adopt standards of safety for protection of health against exposure to ionizing radiation. Within its statutory mandate and pursuant to this request, in 1961, the IAEA issued Regulations for the Safe Transport of Radioactive Material (the IAEA Transport Regulations). The Transport Regulations were periodically reviewed and, as appropriate, have been amended or revised. The latest version of the Transport Regulations was issued in 2000 by the IAEA as Publication TS-R-1 (ST-1, Revised). In addition, the IAEA is entrusted by its Statute to provide for the application of its standards at the request of States. The objective of the Conference is to foster the exchange of information on issues related to the safety of transport of radioactive material by providing an opportunity for representatives from sponsoring international organizations and their Member States and from other co-operating and participating organizations to discuss critical issues relating to the safety of transport of radioactive material by all modes and to formulate recommendations, as appropriate, regarding further international co-operation in this area. The following topics have been identified by the Technical Programme Committee as the subjects to be covered in the background briefing sessions: History and Status of the IAEA Transport Regulation Development; Experience in adoption of the IAEA Transport Regulations at the international level; Implementation of the IAEA Transport

Environmental, health and safety issues related to the production and use of CdTe photovoltaic modules

International Nuclear Information System (INIS)

Moskowitz, P.D.

1992-01-01

This paper examines environmental, health and safety issues associated with the production and use of CdTe photovoltaic modules. Handling of Cd and Te in photovoltaic production can present hazards to health, safety and the environment. Prior recognition of these hazards can allow device manufacturers time to implement appropriate hazard management strategies. The most important health hazards are probably related to chronic low-level exposures to Cd, especially to workers in manufacturing facilities. Because of the long latency period associated with the development of health effects arising from such exposures, and the availability of environmental and biomonitoring protocols, such hazards can be monitored and controlled. The true hazard presented by CdTe is very uncertain because characterizations of its inherent biological toxicity are based on extrapolation of data from other Cd compounds. Technical and institutional mechanisms for the recycling of spent CdTe modules may be needed to ensure public acceptance of this material option and to eliminate expensive disposal costs. (author)

Furthering better communication and understanding of nuclear issues through public education: a public school teacher's perspective

International Nuclear Information System (INIS)

Danfelser, M.

1984-01-01

Recent reports of national commissions and study groups have pointed out that the American educational system is not meeting the needs of its students. Uniformly, the reports call for a new instructional focus designed to achieve the goal of ''universal scientific and technological literacy for citizenship.'' The population's inability to deal with numerous controversial science-related social issues forms the basis for this call for educational reform. Foremost on the list of science-related social issues are nuclear issues in general and the storage of nuclear waste in particular. The National Council for the Social Studies (NCSS) 1983 publication ''Guidelines for Teaching Science Related Social Issues'' was designed to encourage stronger instructional emphasis on science-related social issues, and to provide social studies teachers with a rational and structure for the presentation of the issues. This paper discusses the dilemmas faced by educators who attempt to deal with science-related social issues. Also, it addresses the need for instructional materials in order to effectively address nuclear issues in the classroom

Preserving local writers, genealogy, photographs, newspapers, and related materials

CERN Document Server

Smallwood, Carol

2012-01-01

Preserving Local Writers, Genealogy, Photographs, Newspapers, and Related Materials draws on the practical knowledge of archivists, preservationists, librarians, and others who share the goal of making local history accessible to future generations. Anyone who plans to start a local history project or preserve important historical materials will find plenty of tips, techniques, sample documents, project ideas, and inspiration in its pages.

Google and Women's Health-Related Issues: What Does the Search Engine Data Reveal?

Science.gov (United States)

Baazeem, Mazin; Abenhaim, Haim

2014-01-01

Identifying the gaps in public knowledge of women's health related issues has always been difficult. With the increasing number of Internet users in the United States, we sought to use the Internet as a tool to help us identify such gaps and to estimate women's most prevalent health concerns by examining commonly searched health-related keywords in Google search engine. We collected a large pool of possible search keywords from two independent practicing obstetrician/gynecologists and classified them into five main categories (obstetrics, gynecology, infertility, urogynecology/menopause and oncology), and measured the monthly average search volume within the United States for each keyword with all its possible combinations using Google AdWords tool. We found that pregnancy related keywords were less frequently searched in general compared to other categories with an average of 145,400 hits per month for the top twenty keywords. Among the most common pregnancy-related keywords was "pregnancy and sex' while pregnancy-related diseases were uncommonly searched. HPV alone was searched 305,400 times per month. Of the cancers affecting women, breast cancer was the most commonly searched with an average of 247,190 times per month, followed by cervical cancer then ovarian cancer. The commonly searched keywords are often issues that are not discussed in our daily practice as well as in public health messages. The search volume is relatively related to disease prevalence with the exception of ovarian cancer which could signify a public fear.

Steam generator thermal hydraulic design & functional architecture features and related operational and reliability issues requiring consideration

International Nuclear Information System (INIS)

Klarner, R.G.

2012-01-01

Proper thermal hydraulic design and functional architecture are critical to successful steam generator operation and long term reliability. The evolution of steam generators has been a gradual learning process that has benefited from continuous industry operational experience (OPEX). Inadequate thermal hydraulic design can lead to numerous degradation mechanisms such as excessive deposition, corrosion, flow and level instabilities, fluid-elastic instabilities and tube wear. The functional architecture determines the health of the tube bundle and the other internals during manufacturing, handling and operation. It also determines thermal performance as well as establishing global thermal-hydraulic characteristics such as water level shrink and swell response. This paper discusses the range of operational and reliability issues and relates them to the thermal hydraulic attributes and functional architecture of steam generators (many SG reliability issues are further discussed in other presentations at this conference). In pursuing such issues, the paper focuses on the four major features of the equipment, identifying in each case the goals and requirements such features must meet. Typical approaches and the means by which such requirements are addressed in current equipment are discussed. The four features are: 1. Tubing Material and Tube Bundle Heat Transfer Performance; a. Two materials are in current use – Alloy 690 TT and Alloy 800. Both are good materials with excellent performance records which serve their owners very well (the reliability attributes of Alloy 800 and 690 are discussed in other papers at this conference). Caution is advised in the supply of any material: – material quality is only assured by what is specified to material suppliers in procurement specifications – i.e. - all the knowledge and research in the world assures nothing if its findings are not reflected in procurement requirements. b. Heat transfer performance in addition to being

Assessment of core structural materials and surveillance programme of research reactors. Report of the consultants meeting. Working material

International Nuclear Information System (INIS)

2009-01-01

A series of presentations on the assessment of core structural components and materials at their facilities were given by the experts. The different issues related to degradation mechanisms were discussed. The outputs include a more thorough understanding of the specific challenges related to Research Reactors (RRs) as well as proposals for activities which could assist RR organizations in their efforts to address the issues involved. The experts recommend that research reactor operators consider implementation of surveillance programs for materials of core structural components, as part of ageing management program (TECDOC-792 and DS-412). It is recognised by experts that adequate archived structural material data is not available for many RRs. Access to this data and extension of existing material databases could help many operating organisations extend the operation of their RRs. The experts agreed that an IAEA Technical Meeting (TM) on Assessment of Core Structural Materials should be organised in December 2009 (IAEA HQ Vienna). The proposed objectives of the TM are: (i) exchange of detailed technical information on the assessment and ageing management of core structural materials, (ii) identification of materials of interest for further investigation, (iii) proposal for a new IAEA CRP on Assessment of Core Structural Materials, and (iv) identification of RRs prepared to participate in proposed CRP. Based on the response to a questionnaire prepared for the 2008 meeting of the Technical Working Group for Research Reactors, the number of engineering capital projects related to core structural components is proportionally lower than those related to,for example, I and C or electrical power systems. This implies that many operating research reactors will be operating longer using their original core structural components and justifies the assessment and evaluation programmes and activities proposed in this report. (author)

Youth Solid Waste Educational Materials List, November 1991.

Science.gov (United States)

Cornell Univ., Ithaca, NY. Cooperative Extension Service.

This guide provides a brief description and ordering information for approximately 300 educational materials for grades K-12 on the subject of solid waste. The materials cover a variety of environmental issues and actions related to solid waste management. Entries are divided into five sections including audiovisual programs, books, magazines,…

Evaluation of issues around road materials for sustainable transport

CSIR Research Space (South Africa)

Steyn, WJVDM

2009-07-01

Full Text Available In addition to a number of other factors (social, economic, etc) sustainable transport requires the sustainable supply and use of construction materials. This includes the use of marginal materials, waste materials, novel / innovative materials...

A study on technical issues of materials and design bases in ASME section III subsection NH code

International Nuclear Information System (INIS)

Lee, Hyeong Yeon; Kim, Jong Bum; Yoo, Bong

2000-12-01

In this study, an analysis of evaluation report by ORNL on the technical issues of elevated temperatures design guide line, ASME Code Section III Subsection NH was conducted and a brief evaluation procedure of the creep-fatigue damage was presented. ORNL published the report in 1993 and reviewed the issue areas where code rules or regulatory guides may be lacking or inadequate to ensure safe operation over the expected life cycles for liquid metal reactor systems. From historical viewpoint of the ASME NH code development, ASME Code Case 47 was changed much in 1989 edition, which includes the stress relaxation behavior in creep damage evaluation. Afterwards the 1992 version of CC N-47 was upgraded to Subsection NH in 1995 edition, which is the same with that of CC N-47 1992 edition except few material data. This report brings up the technical and regulatory issues that can not guarantee the safe and reliable operation of the ALMR which got the conceptual design certification from NRC. Twenty three technical issues were raised and settlement methodology were proposed. Additionally, the status of items approved by ASME code subgroup of elevated temperature design committee for the revision of the most recent 1998 edition of ASME NH was described

Bulletin of Materials Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

Articles written in Bulletin of Materials Science. Volume 27 Issue 5 October 2004 pp 417-420 Nuclear Related Materials. Irradiation of large area Mylar membrane and characterization of ... Effect of ion beam irradiation on metal particle doped polymer composites · N L Singh Sejal Shah Anjum Qureshi A Tripathi F Singh D K ...

The Korean Study of Women’s Health-Related Issues (K-Stori: Rationale and Study Design

Directory of Open Access Journals (Sweden)

Ha Na Cho

2017-06-01

Full Text Available Abstract Background Measures to address gender-specific health issues are essential due to fundamental, biological differences between the sexes. Studies have increasingly stressed the importance of customizing approaches directed at women’s health issues according to stages in the female life cycle. In Korea, however, gender-specific studies on issues affecting Korean women in relation to stages in their life cycle are lacking. Accordingly, the Korean Study of Women’s Health-Related Issues (K-Stori was designed to investigate life cycle-specific health issues among women, covering health status, awareness, and risk perceptions. Methods K-Stori was conducted as a nationwide cross-sectional survey targeting Korean women aged 14–79 years. Per each stage in the female life cycle (adolescence, childbearing age, pregnancy & postpartum, menopause, and older adult stage, 3000 women (total 15,000 were recruited by stratified multistage random sampling for geographic area based on the 2010 Resident Registration Population in Korea. Specialized questionnaires per each stage (total of five were developed in consultation with multidisciplinary experts and by reflecting upon current interests into health among the general population of women in Korea. This survey was conducted from April 1 to June 31, 2016, at which time investigators from a professional research agency went door-to-door to recruit residents and conducted in-person interviews. Discussion The study’s findings may help with elucidating health issues and unmet needs specific to each stage in the life cycle of Korean women that have yet to be identified in present surveys.

Giftedness Counseling in Germany: Consultation Reasons and Issues and Their Relations to Gender, Age, and Aptitude

Science.gov (United States)

Hannig, Nele; Koop, Christine

2016-01-01

In Germany, parents can request counseling and assessment of school-related learning and behavioral issues from either independent counseling centers or school-based ones. Focusing on giftedness consultations at independent counseling centers, the goal of this study is to provide a detailed description of the reasons for and the issues discussed…

[Materiality Analysis of Health Plans Based on Stakeholder Engagement and the Issues Included at ISO 26000:2010].

Science.gov (United States)

Moyano Santiago, Miguel Angel; Rivera Lirio, Juana María

2017-01-18

Health plans of the Spanish autonomous communities can incorporate sustainable development criteria in its development. There have been no analysis or proposals about development and indicators. The goal is to add a contribution to help build better health plans aimed at sustainable development and help to manage economic, social and environmental impacts of health systems criteria. We used a variation of the RAND/UCLA or modified Delphi technique method. The process consisted of a bibliographical and context matters and issues related to health and social responsibility analysis based on ISO 26000: 2010. A survey by deliberately to a selection of 70 expert members of the identified stakeholders was carried out and a discussion group was held to determine the consensus on the issues addressed in the survey sample. The research was conducted in 2015. From the literature review 33 health issues included in ISO 26000:2010 were obtained. 7 survey proved relevant high consensus, 8 relevance and average consensus and 18 with less relevance and high level of dissent. The expert group excluded 4 of the 18 subjects with less consensus. 29 issues included 33 at work, divided into 7 subjects contained in the guide ISO 26000 of social responsibility, were relevant stakeholders regarding possible inclusion in health plans. Considering the direct relationship published by ISO (International Organization for Standardization) among the issues ISO 26000 and the economic, social and environmental indicators in GRI (Global Reporting Initiative) in its G4 version, a panel with monitoring indicators related to relevant issues were elaborated.

How the relative permittivity of solar cell materials influences solar cell performance

DEFF Research Database (Denmark)

Crovetto, Andrea; Huss-Hansen, Mathias K.; Hansen, Ole

2017-01-01

of the materials permittivity on the physics and performance of the solar cell by means of numerical simulation supported by analytical relations. We demonstrate that, depending on the specific solar cell configuration and materials properties, there are scenarios where the relative permittivity has a major......The relative permittivity of the materials constituting heterojunction solar cells is usually not considered as a design parameter when searching for novel combinations of heterojunction materials. In this work, we investigate the validity of such an approach. Specifically, we show the effect...... the heterojunction partner has a high permittivity, solar cells are consistently more robust against several non-idealities that are especially likely to occur in early-stage development, when the device is not yet optimized....

The state system of accounting and control of nuclear material in Argentina and the Y2K issue

International Nuclear Information System (INIS)

Moreno, S.F.; Maceiras, E.

1999-01-01

The nuclear regulatory activities in Argentina are carried out by the 'Nuclear Regulatory Authority' (ARN). To fulfil its responsibilities, the ARN has established and enforced a regulatory framework for all nuclear activities concerning nuclear safety and radiological protection, physical protection and the guarantees of non-proliferation. Concerning the guarantees of non-proliferation, the SSAC includes an independent verification system based on national safeguards inspections, evaluations and a centralised accounting database of all nuclear materials in all nuclear activities performed in Argentina. The ARN has implemented two computerised databases to improve its SSAC. One is the 'Safeguards Inspections System' (SIS) developed to optimise the programming of the national inspections and their evaluation. The other is the 'Nuclear Material Control System' (SCMN) designed to improve the issuing and submission of accounting and operating reports. To improve further the SSAC, the ARN has requested software that should be in use at each nuclear installation in the near future. This computerised accounting database (SOP) would increase the quality of the operator's accounting and control system. About the change of the millennium, it is important to bear in mind that it may have an impact not only in the dates of the safeguards reports, but also in some data generated by software or equipment at nuclear installations used as the basis for safeguards records. For example, computerised programs for fuel element management at the Nuclear Power Stations or certain software and hardware in use at bulk installations would require a comprehensive review to assure that the change of the year 2000 will not cause any problem. Besides, some of the data generated by computerised systems at the level of installations are inputs for the three integrated databases SCMN, SIS and SOP. This paper describes the objectives and functions of these integrated systems and some main aspects

A relation to describe rate-dependent material failure.

Science.gov (United States)

Voight, B

1989-01-13

The simple relation OmegaOmega-alpha = 0, where Omega is a measurable quantity such as strain and A and alpha are empirical constants, describes the behavior of materials in terminal stages of failure under conditions of approximately constant stress and temperature. Applicable to metals and alloys, ice, concrete, polymers, rock, and soil, the relation may be extended to conditions of variable and multiaxial stress and may be used to predict time to failure.

Teacher formation related to socio-scientific issues: complexity, contributions and limitations of an educational practice

Directory of Open Access Journals (Sweden)

Mariuce Campos de Moraes

2015-12-01

Full Text Available This reflection refers to teacher formation related to socio-scientific issues. Whereas such matters take into account the impact of scientific development in society, including ethical aspects and encompass dilemmas involving a wide range of prospects for its resolution, we propose analysis of the complexity that is inherent in their teaching. Thus, we aimed to analyze different spaces and teaching time that produce and are produced in close linkage between theory and practice, as well as their contributions and limitations. The study required a dynamic conversation system that led to the analysis indicators. The issue of sustainability was shown to be feasible for educational planning as cover technical and scientific knowledge, ethical, social and economic pressures. The collective production allowed understand arguments and reflective-creative processes. The lived relations in schools has accompanied and limited the ideas expressed on the socio-scientific issues. We understand that the simultaneity of research and reflection in the sociocultural context has strengthened teacher formation.

The Issues of Human Rights in the India-U.S. Relations

Directory of Open Access Journals (Sweden)

Zakharov Aleksey I.

2016-10-01

Full Text Available The article presents a brief overview of India-U.S. relations during the period of Narendra Modi’s government and Barack Obama’s administration. The author analyzes the dynamics of cooperation development after the victory of Bharatiya Janata Party in the 2014 Parliamentary elections in India and studies the key directions of bilateral agenda. The current condition of India-U.S. strategic dialogue and the influence of human rights issues on the countries’ cooperation are characterized. Since 2014 the states’ cooperation has been growing rapidly. The bilateral investment, trade and economic interdependence have significantly increased. Some experts and mass media note that Barack Obama and Narendra Modi are having friendly relations. From a different angle, a number of agreements between countries still remain unaccomplished. For instance, the U.S. support for India’s permanent seat in the United Nations Security Council, its accession to APEC and the implementation of nuclear deal have yet to be turned into achievement. Together with strengthening the bilateral strategic dialogue, the U.S. has intensified the criticism of India’s human rights record. The main part of it includes the cases of religious intolerance, which are observed in the United States Commission on International Religious Freedom reports and the remarks given by U.S. lawmakers and official representatives, including the Ambassador to India. Washington’s careful attention to the human rights issues and religious violence in particular is one of the major irritants in the U.S.-India relations. The engagement of Indian Americans in the local U.S. politics and their lobbying efforts in the context of U.S.-India relations are revealed. The author outlines the near-terms perspectives of bilateral cooperation.

A review of materials and corrosion issues regarding canisters for disposal of spent fuel and high-level waste in Opalinus clay

International Nuclear Information System (INIS)

Landolt, D.; Davenport, A.; Payer, J.; Shoesmith, D.

2009-01-01

corrosion behavior of canisters, the CMRB distinguished four phases during which the corrosive environment is expected to gradually change from aerobic dry to anoxic wet conditions. Possible damage mechanisms of steel were identified for each phase and critically examined, including effects due to radiation, solid reaction products, microbial activity and the occurrence of stress assisted failures. The expected performance of other canister materials was also considered. The CMRB concludes that NAGRA presents a convincing case that using steel canisters surrounded by bentonite as part of a multi-barrier system using Opalinus clay as the geological barrier is a viable concept for the safe disposal of SF/HLW under the assumption that the maximum acceptable hydrogen production rates given by NAGRA can be confirmed in future. A few issues related to the long term performance of steel canisters need to be further elaborated and clarified by NAGRA, but the CMRB found no major issue that would invalidate the use of steel canisters as part of the NAGRA multi-barrier concept. The CMRB deems that the research program pursued by NAGRA is carefully managed, effective and credible. Within the planning horizon for implementation of a repository for SF/HLW in Switzerland, the time table for canister development presented by NAGRA is realistic. While vigorously pursuing the evaluation of the evolution of the near field environment and its effect on the corrosion of steel, NAGRA should from now on initiate a comprehensive program on the evaluation of technological solutions for fabrication, welding, surface finishing and stress mitigation of thick walled steel canisters. (authors)

Power system technical performance issues related to the application of long HVAC cables

DEFF Research Database (Denmark)

Wiechowski, on behalf of Cigre WG C4.502, W.; Sluis, L. V. der; Ohno, Teruo

2011-01-01

This paper reports the progress of work of Cigre Working Group C4.502 “Power system technical performance issues related to the application of long HVAC cables”. The primary goal of the WG C4.502 is to write a technical brochure that will serve as practical guide for performing studies necessary...... for assessing the technical performance of HV/EHV systems with large share of AC cable lines. This paper besides providing a background for formulation of WG C4.502 and its overall aim, describes the tasks that were accomplished before the interim report was submitted to Study Committee C4 System Technical...... Performance in August 2010. The work in the WG is ongoing and final report will be ready according to the time schedule in 2012. The focus of this paper is in particular to show all issues related to system technical performance with assigned weights in terms of their importance and/or uniqueness for cable...

Issues in radiology related to the new technologies

International Nuclear Information System (INIS)

Elkin, M.

1982-01-01

A number of interrelated issues facing radiology have been highlighted by our new technologies. The issues discussed in this presentation are: subspecialization of radiology; the use of economic analyses (CEA/CBA) to judge the cost effectiveness of radiologic procedures, the alleged overuse of radiologic examinations; and the need for the diagnostic radiologist to become more actively involved in patient management

Focused Group Discussion of urban ASHA workers regarding their workrelated issues

Directory of Open Access Journals (Sweden)

Mansi M Brahmbhatt

2017-06-01

Full Text Available Background: Urban ASHA workers bridge the gap between the Urban Health system and urban poor to provide accessible, affordable, accountable, reliable & effective primary health care.  Amis & Objectives: To identify work related problems faced by urban ASHA workers and to seek suggestions for their work-related issues. Settings and Design: FGD of Urban ASHA workers posted at Urban Health Centres of Ahmedabad. Methods and Material: Random sampling was used to select two UHCs and 8 Urban ASHA workers from both the UHCs for conducting FGDs. Statistical analysis used: interview transcribing. Results: Service gave them satisfaction, Salary did not!!! Some of the other important issues related to their work include transportation, cooperation from community, environmental issues & extended working hours. Conclusions: The problems identified and suggestions received needs to be taken seriously, addressed promptly and timely to improve service delivery.

What is materialism? Testing two dominant perspectives on materialism in the marketing literature

Directory of Open Access Journals (Sweden)

Manchiraju Srikant

2015-09-01

Full Text Available Materialism is defined as the importance an individual attaches to worldly possessions, which has been considered as an important construct in consumer behavior and marketing literature. There are two dominant perspectives on individual materialism in the marketing literature that focus on (1 personality traits or (2 individual personal values. However, several scholars have questioned the aforementioned materialism conceptualizations. Therefore, the present study directly compares the constructs of personality materialism and value materialism. Structural equation modeling was employed to address the following issues: (1 what are the key conceptual dimensions of materialism, (2 how much do they overlap, and (3 what is their discriminant validity in predicting outcomes linked to materialism. We suggest these two dominant perspectives on individual materialism are two distinct constructs, as they shared only 21 percent of common variance. Furthermore, we stress the multi-faceted nature of materialism, with an emphasis on future research directions related to materialism in marketing.

A Research on Issues Related to RFID Security and Privacy

Science.gov (United States)

Kim, Jongki; Yang, Chao; Jeon, Jinhwan

Radio Frequency Identification (RFID) is a technology for automated identification of objects and people. RFID systems have been gaining more popularity in areas especially in supply chain management and automated identification systems. However, there are many existing and potential problems in the RFID systems which could threat the technology's future. To successfully adopt RFID technology in various applications, we need to develop the solutions to protect the RFID system's data information. This study investigates important issues related to privacy and security of RFID based on the recent literature and suggests solutions to cope with the problem.

Codes of practice and related issues in biomedical waste management

Energy Technology Data Exchange (ETDEWEB)

Moy, D.; Watt, C. [Griffith Univ. (Australia)

1996-12-31

This paper outlines the development of a National Code of Practice for biomedical waste management in Australia. The 10 key areas addressed by the code are industry mission statement; uniform terms and definitions; community relations - public perceptions and right to know; generation, source separation, and handling; storage requirements; transportation; treatment and disposal; disposal of solid and liquid residues and air emissions; occupational health and safety; staff awareness and education. A comparison with other industry codes in Australia is made. A list of outstanding issues is also provided; these include the development of standard containers, treatment effectiveness, and reusable sharps containers.

Representations for implicit constitutive relations describing non-dissipative response of isotropic materials

Science.gov (United States)

Gokulnath, C.; Saravanan, U.; Rajagopal, K. R.

2017-12-01

A methodology for obtaining implicit constitutive representations involving the Cauchy stress and the Hencky strain for isotropic materials undergoing a non-dissipative process is developed. Using this methodology, a general constitutive representation for a subclass of implicit models relating the Cauchy stress and the Hencky strain is obtained for an isotropic material with no internal constraints. It is shown that even for this subclass, unlike classical Green elasticity, one has to specify three potentials to relate the Cauchy stress and the Hencky strain. Then, a procedure to obtain implicit constitutive representations for isotropic materials with internal constraints is presented. As an illustration, it is shown that for incompressible materials the Cauchy stress and the Hencky strain could be related through a single potential. Finally, constitutive approximations are obtained when the displacement gradient is small.

Low-activation structural ceramic composites for fusion power reactors: materials development and main design issues

International Nuclear Information System (INIS)

Perez, A.S.; Le Bars, N.; Giancarli, L.; Proust, E.; Salavy, J.F.

1994-01-01

Development of advanced Low-Activation Materials (LAMs) with favourable short-term activation characteristics is discussed, for the use as structural materials in a fusion power reactor (in order to reduce the risk associated with a major accident, in particular those related with radio-isotopes release in the environment), and to try to approach the concept of an inherently safe reactor. LA Ceramics Composites (LACCs) are the most promising LAMs because of their relatively good thermo-mechanical properties. At present, SiC/SiC composite is the only LACC considered by the fusion community, and therefore is the one having the most complete data base. The preliminary design of a breeding blanket using SiC/SiC as structural material indicated that significant improvement of its thermal conductivity is required. (author) 11 refs.; 3 figs

Book Review: Radiation protection and measurement issues related to cargo scanning with accelerator-produced high-energy X rays, NCRP Commentary No. 20

International Nuclear Information System (INIS)

May, Robert

2008-01-01

Having spent roughly the first third of his health physics career on the Norfolk, VA waterfront area, the reviewer was excited to see the NCRP Commentary 20, 'Radiation Protection and Measurements Issues Related to Cargo Scanning with Accelerator Technology'. It signals the advent of the Cargo Advanced Automated Radiography System (CAARS). The waterfront is a border that challenges physical security programs and technology. As Commentary 20 provides in the introduction, waterfront cargo terminals and land border crossings together represent over 300 ports of entry in the USA. Every year, the USA receives over 10 million cargo containers from commercial shipping and a roughly equal amount from land border crossings. While rapidly processing containerized cargo, CAARS will be able to detect small quantities of high atomic number radioactive materials and dense shielding materials used for radioactive gamma ray sources and even illicit human cargo - important concerns for homeland security. It will also be able to detect other contraband such as explosives, weapons and drugs. Section 1 of the Commentary presents an executive summary with NCRP's radiation dose management recommendations and related operational recommendations for effective implementation of CAARS technology in the current regulatory environment.

A Study of Current Trends and Issues Related to Technical/Engineering Design Graphics.

Science.gov (United States)

Clark, Aaron C.; Scales Alice

2000-01-01

Presents results from a survey of engineering design graphics educators who responded to questions related to current trends and issues in the profession of graphics education. Concludes that there is a clear trend in institutions towards the teaching of constraint-based modeling and computer-aided manufacturing. (Author/YDS)

Hunger and Development [Issue Packet].

Science.gov (United States)

American Freedom from Hunger Foundation, Washington, DC.

A variety of informational materials is compiled in this issue packet concentrating on hunger and development. They have been assembled to understand the issues associated with the facts of world hunger and to try to invent new forms of action and thought necessary to find the possibilities hidden in the hunger issue. Items include: (1) a fact and…

EU external relations law : text, cases and materials

NARCIS (Netherlands)

Van Vooren, Bart; Wessel, Ramses A.

2014-01-01

This major new textbook for students in European law uses a text, cases and materials approach to explore the law, politics, policy and practice of EU external relations, and navigates the complex questions at the interface of these areas. The subject is explored by explaining major constitutional

A Study on Performance Evaluation of Safety-Related Protective Coating for Yonggwang Unit 1 and 2

International Nuclear Information System (INIS)

Kim, Sung Young; Kim, Young Bum; Lee, Won Sang

2010-01-01

Protective coating inside nuclear power plants could find its origin from NRC Reg. Guide 1.82(Rev. 3) regarding current issue for the regulation of foreign materials inside containment building. The current issue for the regulation of foreign materials inside containment considered/determined the current issues only regarding the blockage of sump screen by foreign materials such as coating material, insulator, and other materials, while safety-related coating is separately managed by NRC Reg. Guide 1.54(Rev. 1). In this study, we performed field walk-down to evaluate the as-is condition of protective coating inside containment building which was classified as for structure and for equipment with applying the requirement for safety-related coating

Key Health Information Technologies and Related Issues for Iran: A Qualitative Study.

Science.gov (United States)

Hemmat, Morteza; Ayatollahi, Haleh; Maleki, Mohammadreza; Saghafi, Fatemeh

2018-01-01

Planning for the future of Health Information Technology (HIT) requires applying a systematic approach when conducting foresight studies. The aim of this study was to identify key health information technologies and related issues for Iran until 2025. This was a qualitative study and the participants included experts and policy makers in the field of health information technology. In-depth semi-structured interviews were conducted and data were analyzed by using framework analysis and MAXQDA software. The findings revealed that the development of national health information network, electronic health records, patient health records, a cloud-based service center, interoperability standards, patient monitoring technologies, telehealth, mhealth, clinical decision support systems, health information technology and mhealth infrastructure were found to be the key technologies for the future. These technologies could influence the economic, organizational and individual levels. To achieve them, the economic and organizational obstacles need to be overcome. In this study, a number of key technologies and related issues were identified. This approach can help to focus on the most important technologies in the future and to priorities these technologies for better resource allocation and policy making.

Photovoltaic system criteria documents. Volume 3: Environmental issues and evaluation criteria for photovoltaic applications

Science.gov (United States)

Koenig, John C.; Billitti, Joseph W.; Tallon, John M.

1979-01-01

The environmental issues and evaluation criteria relating to the suitability of sites proposed for photovoltaic (PV) system deployment are identified. The important issues are defined, briefly discussed and then developed into evaluation criteria. System designers are provided with information on the environmental sensitivity of PV systems in realistic applications, background material which indicates the applicability of the siting issues identified, and evaluation criteria are defined to facilitate the selection of sites that maximize PV system operation.

Synthesis, toxicity, biocompatibility, and biomedical applications of graphene and graphene-related materials

Directory of Open Access Journals (Sweden)

Gurunathan S

2016-05-01

Full Text Available Sangiliyandi Gurunathan, Jin-Hoi Kim Stem Cell and Regenerative Biology, Konkuk University, Seoul, Republic of Korea Abstract: Graphene is a two-dimensional atomic crystal, and since its development it has been applied in many novel ways in both research and industry. Graphene possesses unique properties, and it has been used in many applications including sensors, batteries, fuel cells, supercapacitors, transistors, components of high-strength machinery, and display screens in mobile devices. In the past decade, the biomedical applications of graphene have attracted much interest. Graphene has been reported to have antibacterial, antiplatelet, and anticancer activities. Several salient features of graphene make it a potential candidate for biological and biomedical applications. The synthesis, toxicity, biocompatibility, and biomedical applications of graphene are fundamental issues that require thorough investigation in any kind of applications related to human welfare. Therefore, this review addresses the various methods available for the synthesis of graphene, with special reference to biological synthesis, and highlights the biological applications of graphene with a focus on cancer therapy, drug delivery, bio-imaging, and tissue engineering, together with a brief discussion of the challenges and future perspectives of graphene. We hope to provide a comprehensive review of the latest progress in research on graphene, from synthesis to applications. Keywords: biomedical applications, cancer therapy, drug delivery, graphene, graphene-related materials, tissue engineering, toxicity 

Psychometric evaluation of the Environmental Reality Shock-Related Issues and Concerns instrument for newly graduated nurses.

Science.gov (United States)

Kim, Eun-Young; Yeo, Jung Hee; Park, Hyunjeong; Sin, Kyung Mi; Jones, Cheryl B

2018-02-01

Reality shock is a critical representation of the gap between nursing education and clinical practice and it is important to explore the level of reality shock among nurses. However, there is no relevant instrument to assess the level of reality shock in South Korea. The purpose of this is to determine the validity and reliability of the Korean version of the Environmental Reality Shock-Related Issues and Concerns instrument. A cross-sectional study design was used in this study. The data collection was conducted in selected 15 hospitals in South Korea. A convenience sample of 216 newly graduated nurses participated in the study. The Korean version of the Environmental Reality Shock-Related Issues and Concerns instrument was developed through the forward-backward translation technique, and revision based on feedback from expert groups. The internal consistency reliability was assessed using Cronbach's alpha, and the construct validity was determined via exploratory and confirmatory factor analysis. The Korean version of the Environmental Reality Shock-Related Issues and Concerns has reliable internal consistency (Cronbach's alpha=0.91). Exploratory factor analysis revealed five factors including job, relationships, expectations, private life, and performance, which explained 61.92% of variance. The factor loadings ranged from 0.451 to 0.832. The five-factor structure was validated by confirmatory factor analysis (RMR0.9). It was concluded that the Korean version of the Environmental Reality Shock-Related Issues and Concerns instrument has satisfactory construct validity and reliability to measure the reality shock of newly graduated nurses in South Korea. Copyright © 2017 Elsevier Ltd. All rights reserved.

Space Station Engineering Design Issues

Science.gov (United States)

Mcruer, Duane T.; Boehm, Barry W.; Debra, Daniel B.; Green, C. Cordell; Henry, Richard C.; Maycock, Paul D.; Mcelroy, John H.; Pierce, Chester M.; Stafford, Thomas P.; Young, Laurence R.

1989-01-01

Space Station Freedom topics addressed include: general design issues; issues related to utilization and operations; issues related to systems requirements and design; and management issues relevant to design.

Lead-acid battery technologies fundamentals, materials, and applications

CERN Document Server

Jung, Joey; Zhang, Jiujun

2015-01-01

Lead-Acid Battery Technologies: Fundamentals, Materials, and Applications offers a systematic and state-of-the-art overview of the materials, system design, and related issues for the development of lead-acid rechargeable battery technologies. Featuring contributions from leading scientists and engineers in industry and academia, this book:Describes the underlying science involved in the operation of lead-acid batteriesHighlights advances in materials science and engineering for materials fabricationDelivers a detailed discussion of the mathematical modeling of lead-acid batteriesAnalyzes the

Research on Evaluation Methodology for High Temperature Components and Technical Issues

International Nuclear Information System (INIS)

Kim, Y.J.; Han, S.B.

2007-03-01

The research on evaluation methodology for high temperature components and technical issues includes the comparison of evaluation technology of Very High Temperature Reactors(VHTRs) with that of present commercial reactors, the review of Hot Gas Duct(HGD) insulation designs, the analysis of the codes related to VHTR component construction and the analysis of technical issues on application of present codes to HGD construction. Codes to assure the integrity of the VHTR components are not fully prepared yet in any country. To understand the evaluation technology of the VHTR-related codes, key requirements of ASME B and PV Code Section III, Subsection NB and NH were compared. Six kinds of HGD designs were reviewed and compared. A reference which analyzed seven kinds of present component codes were reviewed and the limitations of them were summarized. Especially it was found that the selection of materials is limited, material property data are not enough, and design analysis methodology is not fully specified

A Study in Historical Materialism and International Relations

African Journals Online (AJOL)

Historical materialism as a discourse assumes that the economic determines the political and other dimensions of society. Nigeria had set specific conditions for renewed relations with apartheid South Africa. These were yet to be met and the intensity that characterised Nigeria's pursuance of an aggressive anti-apartheid ...

Stakeholders' perspective on issues and challenges associated with care and treatment of aging-related cognitive impairment disorders in Singapore.

Science.gov (United States)

Setia, Monika; Islam, Amina M; Thompson, James P; Matchar, David B

2011-11-01

An expanding elderly population poses challenges for the provision of care and treatment for age-related physical and mental disorders. Cognitive impairment (CI)/dementia is one such mental disorder that is on the rise in Singapore and has concomitant implications for social and health systems. The objective of this study is to understand the perspectives of prominent stakeholders about current and future issues and challenges associated with CI/dementia among the elderly in Singapore. Using indepth interviews, this qualitative study obtained the views of multiple stakeholders on issues and challenges associated with CI/dementia in Singapore. The 30 individuals interviewed as part of the study included clinicians, policy-makers, researchers, community workers, administrators, and caregivers. Using a framework approach, interview texts were indexed into domains and issues by utilizing NVivo 9.0 software. The stakeholders expressed concerns related to multiple domains of the CI/dementia care system: attitude and awareness, economics, education, family caregiving, inputs to care system, living arrangements, prevention, screening and diagnosis, and treatment and management of care. Within each domain, multiple issues and challenges were identified by respondents. The study identifies a complex set of inter-related issues and challenges that are associated with the care and treatment of people with CI/dementia. The results suggest that CI and dementia profoundly affect patients, families, and communities and that the issues related to the two disorders are truly system-wide. These findings lay the foundation for utilization of a systems approach to studying CI/dementia and provide an analytic framework for future research on complex health care issues.

Industrial pollutions is an environmental issue of Karachi urban area

International Nuclear Information System (INIS)

Jokhio, M.H.; Abro, M.I.; Essani, A.

2005-01-01

The Industrial pollution is one of the serious Environmental issues of the Karachi urban area, categorized as air pollution and water pollution. The localization more the 6000 industries in Karachi urban area at four different sites of Sindh industrial trading estate, Landhi industrial trading estate, Korangi industrial area west Warf industrials, Port Qasim industrial. Area and Hub industrial are near Karachi city. The major iron and steel industries includes Pakistan steel mills and its allied industries at Bin Qasim more than 100 re-rolling industries are located at site area. Karachi ship yard engineering works, Peoples steel Mill, automobile industries and various manufacturing industries which requires metal and its alloy in manufacturing of product mostly located at Bin Qasim, Korangi, and Shershah site areas. None of the industrial sector contain the waster treatment or recycling plant. The ill planted growth of Karachi and its industries caused the environmental degradation of the city and its coastal areas complete with massive mangrove destruction, air water, fishing, and agriculture possessing a potential threat to the lives of more than 10 million citizens. The environmental issues of the metal related industries include the scrap, waste and pollution. Scrapes am waste of the metal industries can be reused in other manufacturing of engineering materials or recycled to produce the new material. However the pollution is the one of the major environmental issue related with the metal industries which need the considerable research and development work in order to over come the serve environmental issues of the urban areas. This article reviews and identifies the level of industrial pollution emphasized on metal related industries of the Karachi urban areas. (author)

Are Competitive Materialism and Female Employment Related to International Homicide Rate?

Science.gov (United States)

Chon, Don Soo

2017-04-01

The institutional anomie theory is a proposal that states competitive materialism, an intense cultural pressure for economic success at any costs, and increased female employment may be related to a high homicide rate. The current work tested this proposition by utilizing homicide data collected from 45 developed and developing countries. Regression results did not support the proposition. Competitive materialism and female employment were not significantly related to the cross-national variation of homicide rates.

Eminent radiological safety issues confronting the State of Hawaii

International Nuclear Information System (INIS)

Hashimoto, H.H.

1984-01-01

The State of Hawaii currently has over one hundred radioactive material use licenses. Nuclear Regulatory Commission licenses are primarily held by hospitals, industrial radiographers, and academic institutions. Complementing this, the State Department of Health regulates x-ray machines, radium, and has an emergency response role for accidents involving radioactive materials. The existing radiation protection program was created by piecemeal legislation. As a result, regulatory surveillance and actual control vary widely among the agencies. The State Legislature, in 1980, decided that action must be taken to set a clear state policy towards the use and disposal of nuclear materials. It was therefore recommended that the State of Hawaii Radiation Safety Advisory Committee be convened to assist the state in the evaluation of the issues. This report contains issue papers on radiation related topics addressed by the Radiation Safety Advisory Committe. Topics discussed include transportation, environmental monitoring, emergency response, and waste disposal. A survey of various radioactive sources identified medical applications as a category requiring stricter control. Selected chapters of the Hawaii Revised Statutes are also examined

Potential of Technogenic Mineral Raw Materials in Russia and the Issues of its Rational Use

Directory of Open Access Journals (Sweden)

Larisa Ivanovna Goncharova

2015-11-01

Full Text Available The increasing negative impact of mining waste on natural ecosystems often leads to their irreversible destruction, a trend that is gradually becoming global. The particular relevance of the research is explained, on the one hand, by the possibilities of minimization of specific volumes of formation of mining waste in all types of industries; on the other hand, by the possibilities of maximization of comp rehensive use of their valuable components as secondary material resources on an economically rational basis and the possibilities of restoring the disturbed natural environment. The rational use of natural and technogenic mineral raw materials is greatly facilitated by the geological exploration and geological-economic evaluation of the resources, which requires the development of specific methodological approaches to the economic justification of resource estimation parameters for outlining and calculating the multicomponent commercial reserves of raw materials and separate valuable components in them. Analysis shows that researchers’ opinions on a number of methodological principles of sustainable mining, complex processing of multicomponent materials are often contradictory. Scientific publications do not consider the issue of the price valuation of mining waste as secondary material resources. Mining waste processing should be considered as an important part of the overall socio-ecological-economic system for rational nature management. The analysis of the existing practice of using the mining waste should be based on the system approach and take into consideration geological, technological, economic, environmental and social characteristics throughout the cycle of production, combined processing and treatment of secondary waste according to the principle “from the earth to the earth”. The article identifies the main barriers to the recycling of mining wastes, proposes several methodological guidelines for the sustainable mining and

LIFE Materials: Overview of Fuels and Structural Materials Issues Volume 1

Energy Technology Data Exchange (ETDEWEB)

Farmer, J

2008-09-08

The National Ignition Facility (NIF) project, a laser-based Inertial Confinement Fusion (ICF) experiment designed to achieve thermonuclear fusion ignition and burn in the laboratory, is under construction at the Lawrence Livermore National Laboratory (LLNL) and will be completed in April of 2009. Experiments designed to accomplish the NIF's goal will commence in late FY2010 utilizing laser energies of 1 to 1.3 MJ. Fusion yields of the order of 10 to 20 MJ are expected soon thereafter. Laser initiated fusion-fission (LIFE) engines have now been designed to produce nuclear power from natural or depleted uranium without isotopic enrichment, and from spent nuclear fuel from light water reactors without chemical separation into weapons-attractive actinide streams. A point-source of high-energy neutrons produced by laser-generated, thermonuclear fusion within a target is used to achieve ultra-deep burn-up of the fertile or fissile fuel in a sub-critical fission blanket. Fertile fuels including depleted uranium (DU), natural uranium (NatU), spent nuclear fuel (SNF), and thorium (Th) can be used. Fissile fuels such as low-enrichment uranium (LEU), excess weapons plutonium (WG-Pu), and excess highly-enriched uranium (HEU) may be used as well. Based upon preliminary analyses, it is believed that LIFE could help meet worldwide electricity needs in a safe and sustainable manner, while drastically shrinking the nation's and world's stockpile of spent nuclear fuel and excess weapons materials. LIFE takes advantage of the significant advances in laser-based inertial confinement fusion that are taking place at the NIF at LLNL where it is expected that thermonuclear ignition will be achieved in the 2010-2011 timeframe. Starting from as little as 300 to 500 MW of fusion power, a single LIFE engine will be able to generate 2000 to 3000 MWt in steady state for periods of years to decades, depending on the nuclear fuel and engine configuration. Because the fission

Materials Frontiers to Empower Quantum Computing

Energy Technology Data Exchange (ETDEWEB)

Taylor, Antoinette Jane [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sarrao, John Louis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Richardson, Christopher [Laboratory for Physical Sciences, College Park, MD (United States)

2015-06-11

This is an exciting time at the nexus of quantum computing and materials research. The materials frontiers described in this report represent a significant advance in electronic materials and our understanding of the interactions between the local material and a manufactured quantum state. Simultaneously, directed efforts to solve materials issues related to quantum computing provide an opportunity to control and probe the fundamental arrangement of matter that will impact all electronic materials. An opportunity exists to extend our understanding of materials functionality from electronic-grade to quantum-grade by achieving a predictive understanding of noise and decoherence in qubits and their origins in materials defects and environmental coupling. Realizing this vision systematically and predictively will be transformative for quantum computing and will represent a qualitative step forward in materials prediction and control.

'Low-activation' fusion materials development and related nuclear data needs

International Nuclear Information System (INIS)

Cierjacks, S.

1990-01-01

So-called ''low-activation'' materials are presently considered as an important means of improving the safety characteristics of future DT fusion reactors. Essential benefits are expected in various problem areas ranging from operation considerations to aspects of decommissioning and waste disposal. Present programs on ''low-activation'' materials development depend strongly on reliable activity calculations for a wide range of technologically important materials. The related nuclear data requirements and important needs for more and improved nuclear data are discussed. (author). 32 refs, 4 figs, 4 tabs

Selection of materials for ETF

International Nuclear Information System (INIS)

Nygren, R.E.

1980-01-01

Repeated operation of a long burning, ignited plasma in ETF implies high exposure to an intense source of energetic particles and high energy (14.1 MeV) neutrons and presents a unique environment for materials in ETF compared with earlier tokamaks. Designing ETF (and FED) will provide many insights into reactor relevant design issues related to materials performance, particularly in components outside the first wall. This paper focuses primarily on how exposure to the plasma and radiation damage to materials infuence the design lifetime of particular components, including the first wall, armor, and TF coils. Also discussed are radiaton exposure limits for repair welding of the torus and for electrical materials used in RF and diagnostics

Surveillance of social and geographic inequalities in housing-related issues: the case of the Eastern Townships, Quebec (Canada).

Science.gov (United States)

Roy, Mathieu; Généreux, Mélissa; Laverdière, Emélie; Vanasse, Alain

2014-05-06

Even though health inequalities are conditioned by many aspects of the environment, much of the existing research focuses on the social environment. This emphasis has the effect to neglect other environmental aspects such as its physical dimension. The physical environment, which is linked to housing conditions, may contribute to the uneven distribution of health. In this study, we examined 19 housing-related issues among a representative sample of 2,000 adults residing in a Quebec (Canada) health region characterized by a mix of rural, semi-rural, and urban areas. The distribution of these issues was examined according to socioeconomic and geographic indicators of social position. Summary measures of inequalities were assessed. Our results showed that the prevalence of nearly all housing-related issues was higher among low-income households compared to more affluent ones. Highly educated individuals showed better housing conditions, whereas different issues tended to cluster in deprived or densely populated areas. To conclude, we observed steep gradients between social class and poor housing conditions. This may explain a substantial part of health inequality on the regional scale. The surveillance of housing-related issues is therefore essential to properly inform and mobilize local stakeholders and to develop interventions that target vulnerable groups on this level.

Hospital Malnutrition Related to Fasting and Underfeeding: Is It an Ethical Issue?

Science.gov (United States)

Arenas Moya, Diego; Plascencia Gaitán, Alejandra; Ornelas Camacho, Denisse; Arenas Márquez, Humberto

2016-06-01

Hospital malnutrition is a relevant clinical issue present in about 50% of patients that is associated with increased morbidity, mortality, and cost of care. Because of the relation of malnutrition with chronic and acute inflammatory processes secondary to disease, nutrition therapy is considered an important medical treatment. However, there is little discussion about the impact of another critical issue related to hospital malnutrition, that is, lack of appropriate food or nutrition therapy given to the patients. Unnecessary fasting practices and the use of inappropriate nutrition prescriptions result in underfeeding that can be a related or direct cause of hospital malnutrition, independent of disease or inflammatory state. Suboptimal prescription of oral, enteral, and parenteral nutrition should be analyzed and discussed from an ethical perspective since this practice has the potential to harm patients. In addition, absence or inadequate provision of nutrition may present barriers for improved patient outcomes and could be prevented by simply recognizing lack of knowledge, skills, or experience in nutrition and entrusting nutrition prescription to interdisciplinary teams with clinicians well prepared in nutrition sciences. This article reviews potential barriers to the prevention or treatment of hospital malnutrition and proposes specific actions that can help clinicians to overcome and implement optimal nutrition not just as medical therapy but also as a basic comfort care that may help patients nutritionally, clinically, physically, and emotionally. © 2016 American Society for Parenteral and Enteral Nutrition.

Kurdish men's experiences of migration-related mental health issues.

Science.gov (United States)

Taloyan, Marina; Al-Windi, Ahmad; Johansson, Leena Maria; Saleh-Stattin, Nuha

2011-10-01

The migration process may impose stress on the mental health of immigrants. To describe the experiences of immigrant men of Kurdish ethnicity during and after migration to Sweden with regard to mental health issues. Using the grounded theory method, we conducted a focus group interview with four Kurdish men and in-depth individual interviews with 10 other Kurdish men. A model with two major themes and interlinked categories was developed. The themes were (1) protective factors for good mental health (sense of belonging, creation and re-creation of Kurdish identity, sense of freedom, satisfaction with oneself) and (2) risk factors for poor mental health (worry about current political situation in the home country, yearning, lack of sense of freedom, dissatisfaction with Swedish society). The study provides insights into the psychological and emotional experiences of immigrant men of Kurdish ethnicity during and after migration to Sweden. It is important for primary health care providers to be aware of the impact that similar migration-related and life experiences have on the health status of immigrants, and also to be aware that groups are comprised of unique individuals with differing experiences and reactions to these experiences. The findings highlight the common themes of the men's experiences and suggest ways to ameliorate mental health issues, including feeling like one is seen as an individual, is a full participant in society, and can contribute to one's own culture.

NSF/AFOSR/ASME Workshop on Tribology Issues and Opportunities in MEMS

CERN Document Server

1998-01-01

Micro Electro Mechanical Systems (MEMS) is already about a billion dollars a year industry and is growing rapidly. So far major emphasis has been placed on the fabrication processes for various devices. There are serious issues related to tribology, mechanics, surfacechemistry and materials science in the operationand manufacturingof many MEMS devices and these issues are preventing an even faster commercialization. Very little is understood about tribology and mechanical properties on micro- to nanoscales of the materials used in the construction of MEMS devices. The MEMS community needs to be exposed to the state-of-the-artoftribology and vice versa. Fundamental understanding of friction/stiction, wear and the role of surface contamination and environmental debris in micro devices is required. There are significantadhesion, friction and wear issues in manufacturing and actual use, facing the MEMS industry. Very little is understood about the tribology of bulk silicon and polysilicon films used in the constr...

Relative Density of Backfilled Soil Material around Monopiles for Offshore Wind Turbines

DEFF Research Database (Denmark)

Sørensen, Søren Peder Hyldal; Ibsen, Lars Bo; Frigaard, Peter

2012-01-01

The relative density of backfilled soil material around offshore monopiles is assessed through experimental testing in the Large Wave Channel (GWK) of the Coastal Research Centre (FZK) in Hannover. The relative density of the backfill material was found to vary between 65 and 80 %. The dependency...... of the relative density of backfill on the maximum pile bending moment is assessed through three-dimensional numerical modeling of a monopile foundation located at the offshore wind farm at Horns Reef, Denmark....

The implementation of integrated science teaching materials based socio-scientific issues to improve students scientific literacy for environmental pollution theme

Science.gov (United States)

Yenni, Rita; Hernani, Widodo, Ari

2017-05-01

The study aims to determine the increasing of students' science literacy skills on content aspects and competency of science by using Integrated Science teaching materials based Socio-scientific Issues (SSI) for environmental pollution theme. The method used in the study is quasi-experiment with nonequivalent pretest and posttest control group design. The students of experimental class used teaching materials based SSI, whereas the students of control class were still using the usual textbooks. The result of this study showed a significant difference between the value of N-gain of experimental class and control class, whichalso occurred in every indicator of content aspects and competency of science. This result indicates that using of Integrated Science teaching materials based SSI can improve content aspect and competency of science and can be used as teaching materials alternative in teaching of Integrated Science.

Progress on resolution of major surety issues

International Nuclear Information System (INIS)

Bell, C.R.; Boudreau, J.M.

1985-01-01

This paper presents a summary of the major surety issues (safety, environmental protection, sageguards, reliability, quality assurance) that have been identified during Phase I of the SP-100 Program and the progress that has been made in analyzing the most important of these issues in the context of the conceptual design effort. These issues have been identified as inadvertent criticality, toxic material release and dispersion, radiation exposure following end-of-life reentry, potential diversion of special nuclear material, failure to achieve end-of-life neutronic shutdown, and structural predictability for end-of-life re-entry or boost. Because of the complexity of these issues, a simplified conservative approach was taken during Phase I. Progress on these issues has been mainly in the area of increased understanding of the issues, identification of design features to resolve the issues, and quantitative evaluations of the surety characteristics of the various design concepts

Methodological Issues in HIV-Related Social Research in Nigeria

African Journals Online (AJOL)

AJRH Managing Editor

Methodological Issues in HIV/AIDS Social Research in Nigeria ... convaincue au commencement de l'étude qu'une étude sur l'interaction entre le VIH/sida et les questions sensibles comme les ..... One of the vexed issues was the requirement.

The projected relative index of consequence equivalence of transport of radioactive materials

International Nuclear Information System (INIS)

Nandakumar, A.N.

1999-01-01

The need exists for defining a unit risk factor to enable analysis to make a proper decision when faced with many options relating to the transport of radioactive materials between sites. A method is discussed for deriving such a factor with reference to the collective dose receivable due to the transport of radioactive material incidental to the production of one GWe.a of nuclear power. This quantity would enable the analyst to determine the projected relative index of consequence equivalence (PRICE) for the transport of various types of radioactive materials. (author)

Advances in design and modeling of porous materials

Science.gov (United States)

Ayral, André; Calas-Etienne, Sylvie; Coasne, Benoit; Deratani, André; Evstratov, Alexis; Galarneau, Anne; Grande, Daniel; Hureau, Matthieu; Jobic, Hervé; Morlay, Catherine; Parmentier, Julien; Prelot, Bénédicte; Rossignol, Sylvie; Simon-Masseron, Angélique; Thibault-Starzyk, Frédéric

2015-07-01

This special issue of the European Physical Journal Special Topics is dedicated to selected papers from the symposium "High surface area porous and granular materials" organized in the frame of the conference "Matériaux 2014", held on November 24-28, 2014 in Montpellier, France. Porous materials and granular materials gather a wide variety of heterogeneous, isotropic or anisotropic media made of inorganic, organic or hybrid solid skeletons, with open or closed porosity, and pore sizes ranging from the centimeter scale to the sub-nanometer scale. Their technological and industrial applications cover numerous areas from building and civil engineering to microelectronics, including also metallurgy, chemistry, health, waste water and gas effluent treatment. Many emerging processes related to environmental protection and sustainable development also rely on this class of materials. Their functional properties are related to specific transfer mechanisms (matter, heat, radiation, electrical charge), to pore surface chemistry (exchange, adsorption, heterogeneous catalysis) and to retention inside confined volumes (storage, separation, exchange, controlled release). The development of innovative synthesis, shaping, characterization and modeling approaches enables the design of advanced materials with enhanced functional performance. The papers collected in this special issue offer a good overview of the state-of-the-art and science of these complex media. We would like to thank all the speakers and participants for their contribution to the success of the symposium. We also express our gratitude to the organization committee of "Matériaux 2014". We finally thank the reviewers and the staff of the European Physical Journal Special Topics who made the publication of this special issue possible.

Swelling, stiffness, and stress in gel material - as related to moisture sorption

DEFF Research Database (Denmark)

Nielsen, Lauge Fuglsang

1996-01-01

A method is presented by which estimates can be made on swelling, bulk modulus, and internal stresses in gel materials as related to water sorption. Porous gel materials are considered as gel materials made porous by capillary pores large enough not to create capillary condensation and capillary...

Uranium Raw Material for the Nuclear Fuel Cycle: Exploration, Mining, Production, Supply and Demand, Economics and Environmental Issues (URAM-2009). Proceedings of an International Symposium

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-05-15

This IAEA symposium is a third in a series which began in 2000 to discuss issues related to uranium raw materials. The symposia covered all areas of the uranium production cycle — including uranium geology, exploration, mining; milling and refining of uranium concentrates; and safety, environmental, social, training and regulatory issues — and reported on uranium supply and demand, and market scenarios. The first symposium was held in October 2000 — a time of extremely depressed market prices for uranium and of mines being closed — and primarily addressed environmental and safety issues in the uranium production cycle. By the time the second symposium was held in June 2005, the uranium market had started to improve after nearly two decades of depressed activity because of increased demand due to rising expectations for nuclear power expansion. Since then, there has been a dramatic rise in the uranium spot price, which in turn has promoted a significant increase in uranium exploration activities all over the world. The international symposium on Uranium Raw Material for the Nuclear Fuel Cycle (URAM-2009) was held at the IAEA, Vienna, 22–26 June 2009, at a time when nuclear energy was emerging as a viable alternative to meet the ever increasing demand of electricity in a sustainable manner, without degrading the environment. However, the global recession and credit crunch could impact the growth of the uranium industry. Since 2000, the identified uranium resource base has grown by more than 75%, exploration efforts have continued to increase in greenfield as well as brownfield sites, annual uranium production has risen, and the issue of social licensing and uranium stewardship has become increasingly important for public acceptance of the uranium industry. Some 210 delegates from 33 States and four international organizations participated in the symposium. In total, 120 technical papers were presented in the oral and poster sessions, and an exhibition on

Uranium Raw Material for the Nuclear Fuel Cycle: Exploration, Mining, Production, Supply and Demand, Economics and Environmental Issues (URAM-2009). Proceedings of an International Symposium

International Nuclear Information System (INIS)

2014-05-01

This IAEA symposium is a third in a series which began in 2000 to discuss issues related to uranium raw materials. The symposia covered all areas of the uranium production cycle — including uranium geology, exploration, mining; milling and refining of uranium concentrates; and safety, environmental, social, training and regulatory issues — and reported on uranium supply and demand, and market scenarios. The first symposium was held in October 2000 — a time of extremely depressed market prices for uranium and of mines being closed — and primarily addressed environmental and safety issues in the uranium production cycle. By the time the second symposium was held in June 2005, the uranium market had started to improve after nearly two decades of depressed activity because of increased demand due to rising expectations for nuclear power expansion. Since then, there has been a dramatic rise in the uranium spot price, which in turn has promoted a significant increase in uranium exploration activities all over the world. The international symposium on Uranium Raw Material for the Nuclear Fuel Cycle (URAM-2009) was held at the IAEA, Vienna, 22–26 June 2009, at a time when nuclear energy was emerging as a viable alternative to meet the ever increasing demand of electricity in a sustainable manner, without degrading the environment. However, the global recession and credit crunch could impact the growth of the uranium industry. Since 2000, the identified uranium resource base has grown by more than 75%, exploration efforts have continued to increase in greenfield as well as brownfield sites, annual uranium production has risen, and the issue of social licensing and uranium stewardship has become increasingly important for public acceptance of the uranium industry. Some 210 delegates from 33 States and four international organizations participated in the symposium. In total, 120 technical papers were presented in the oral and poster sessions, and an exhibition on

Uranium Raw Material for the Nuclear Fuel Cycle: Exploration, Mining, Production, Supply and Demand, Economics and Environmental Issues (URAM-2009). Proceedings of an International Symposium

International Nuclear Information System (INIS)

2014-06-01

This IAEA symposium is a third in a series which began in 2000 to discuss issues related to uranium raw materials. The symposia covered all areas of the uranium production cycle — including uranium geology, exploration, mining; milling and refining of uranium concentrates; and safety, environmental, social, training and regulatory issues — and reported on uranium supply and demand, and market scenarios. The first symposium was held in October 2000 — a time of extremely depressed market prices for uranium and of mines being closed — and primarily addressed environmental and safety issues in the uranium production cycle. By the time the second symposium was held in June 2005, the uranium market had started to improve after nearly two decades of depressed activity because of increased demand due to rising expectations for nuclear power expansion. Since then, there has been a dramatic rise in the uranium spot price, which in turn has promoted a significant increase in uranium exploration activities all over the world. The international symposium on Uranium Raw Material for the Nuclear Fuel Cycle (URAM-2009) was held at the IAEA, Vienna, 22–26 June 2009, at a time when nuclear energy was emerging as a viable alternative to meet the ever increasing demand of electricity in a sustainable manner, without degrading the environment. However, the global recession and credit crunch could impact the growth of the uranium industry. Since 2000, the identified uranium resource base has grown by more than 75%, exploration efforts have continued to increase in greenfield as well as brownfield sites, annual uranium production has risen, and the issue of social licensing and uranium stewardship has become increasingly important for public acceptance of the uranium industry. Some 210 delegates from 33 States and four international organizations participated in the symposium. In total, 120 technical papers were presented in the oral and poster sessions, and an exhibition on

Corrosion aspects of Ni-Cr-Fe based and Ni-Cu based steam generator tube materials

International Nuclear Information System (INIS)

Dutta, R.S.

2009-01-01

This paper reviews corrosion related issues of Ni-Cr-Fe based (in a general sense) and Ni-Cu based steam generator tube materials for nuclear power plants those have been dealt with for last more than four decades along with some updated information on corrosion research. The materials include austenitic stainless steels (SSs), Alloy 600, Monel 400, Alloy 800 and Alloy 690. Compatibility related issues of these alloys are briefly discussed along with the alloy chemistry and microstructure. For austenitic SSs, stress corrosion cracking (SCC) behaviour in high temperature aqueous environments is discussed. For Alloy 600, intergranular cracking in high temperature water including hydrogen-induced intergranular cracking is highlighted along with the interactions of material in various environments. In case of Monel 400, intergranular corrosion and pitting corrosion at ambient temperature and SCC behaviour at elevated temperature are briefly described. For Alloy 800, the discussion covers SCC behaviour, surface characterization and microstructural aspects of pitting, whereas hydrogen-related issues are also highlighted for Alloy 690.

Ethical issues related to epilepsy care in the developing world.

Science.gov (United States)

Tan, Chong-Tin; Avanzini, Giuliano

2009-05-01

There are three major issues of ethical concern related to epilepsy care in the developing world. First, is it ethical for a developing country to channel its limited resources from direct epilepsy care to research? The main considerations in addressing this question are the particular research questions to be addressed and whether such research will bring direct benefits to the local community. Second, in a country with limited resources, when does ignoring the high treatment gap become an ethical issue? This question is of particular concern when the community has enough resources to afford treatment for its poor, yet is not providing such care because of gross wastage and misallocation of the national resources. Third, do countries with plentiful resources have an ethical responsibility to help relieve the high epilepsy treatment gap of poor countries? Indeed, we believe that reasonable health care is a basic human right, and that human rights transcend national boundaries. Although health care is usually the responsibility of the nation-state, many modern states in the developing world are arbitrary creations of colonization. There is often a long process from the establishment of a political-legal state to a mature functional nation. During the long process of nation building, help from neighboring countries is often required.

Issue Relating to The Production and Sale of Milk Products to SC Helvetika Milk SRL Pecica, Arad County

Directory of Open Access Journals (Sweden)

Iuliana Ioana Merce

2014-10-01

Full Text Available Food quality and human health influences contemporary life. Today more than ever, quality products to be safe in terms of food to meet the needs and innocuity became major values ​​for all producers, processors, distributors, especially for food consumers who are becoming more aware that their health depends on the quality of the food they consume. The paper recently a case study in a Romanian company in the dairy industry and the manufacture of dairy products, and all commercial operations the object of transaction milk and milk products, a small company that combines managed but we consider traditionalism ( the products we offer to the market modernism ( European requirements, quick marketing, producer - client relationship etc. This paper analyzes the emergence and development aspects of the company, implementing and upgrading production technology, issues related to the introduction of quality management, promotion and sale of products, customer relations, etc. We believe that SC HELVETICA MILK SRL, the constant concern of food safety, raw material procurement stage till marketing - customer satisfaction by offering quality products and thereby ensure customer loyalty. In conclusion, we believe the company is a successful example of business succces Romanian food industry.

Three-Fold Embedding: Farm Development in Relation to Its Socio-Material Context

Directory of Open Access Journals (Sweden)

Ron Methorst

2017-09-01

Full Text Available Understanding heterogeneity in farm development strategies is important in order to design effective policies and support programs to increase the sustainability of agriculture in relation to its socio-material context. Using a unique case study of 102 dairy farmers in The Netherlands, all operating in a highly similar socio-material context, this paper studies the differences in the relation of farms with the socio-material context. To this end, the concept of three-fold embedding is developed and tested using the ideal-typical characteristics of three patterns of farm development that were identified in the case study: (1 maximising total milk production; (2 optimising milk production using mainly on-farm resources; and (3 diversified on-farm production. Three-fold embedding was conceptualised in relation to the following dimensions: (1 value chain relations; (2 socio-cultural relations; and (3 natural resource relations, while using a scale ranging from a Close to a Stretched set of relations. The concept of three-fold embedding proves to be useful to identify in a non-normative and non-binary manner meaningful differences between patterns of farm development. These differences relate to differences in opportunity identification and strategic decision-making. The concept supports a relational perspective in studying farm strategy development using a sociology of entrepreneurship approach.

Federal supervisory authorities' power to issue directives in nuclear licensing procedures (Kalkar reactor)

International Nuclear Information System (INIS)

Anon.

1990-01-01

The Federal Constitutional Court (BVerfG) is concerned in its judgement with the legal instrument of Federal supervisory authorities' power to issue directives in nuclear licensing procedures (Kalkar reactor). Dealt with are questions concerning material and excercising competences, the Federal Government's right to issue directives and possible violation of Laender rights, as well as the legal position between Land and Federal Government, the necessity to issue clear directives, questions concerning the competence to issue directives and the Federal Government's duty to consider the overall interests (Federal Government and Laender interests), questions concerning constitutional state principles and the limits in the relations between Federal Government - Laender concerning legal competence. (RST) [de

Safety issues on advanced fuel

International Nuclear Information System (INIS)

Gross, H.; Krebs, W.D.

1998-01-01

In the recent years a general discussion has started whether unsolved safety issues are related to advanced fuel. Advanced fuel is in this context a summary of features like high burnup, improved clad materials, low leakage loading pattern with high peaking factors etc. The design basis accidents RIA and Loca are of special interest for this discussion. From the Siemens point of view RIA is not a safety issue. There are sufficient margins between the enthalpy rise calculated by modern 3D methods and the fuel failures which occurred in RIA simulation tests when the effect of pulse width is taken into account. The evaluation of possible uncertainties for the established Loca criteria (17% equivalent corrosion, 1200 C clad temperature) for high burnup makes sense. But fuel with high burnup has significantly lower peaking factors than fuel with lower burnup. This gives sufficient margin counterbalancing possible uncertainties. In contrast to the above incomplete control rod insertion at higher burnup is potentially a real safety issue. Although Siemens fuel was not affected by the reported incidents they addressed the problem and checked that they have sufficient design margin for their fuel. (orig.) [de

Opening Address [URAM-2009: 3. International Symposium on Uranium Raw Material for the Nuclear Fuel Cycle: Exploration, Mining, Production, Supply and Demand, Economics and Environmental Issues, Vienna (Austria), 22-26 June 2009

Energy Technology Data Exchange (ETDEWEB)

Sokolov, Y. A. [Department of Nuclear Energy, International Atomic Energy Agency, Vienna (Austria)

2014-05-15

The objective of the IAEA’s programme on nuclear power and related nuclear fuel cycle activities is to promote the development of nuclear power and fuel cycle technologies that are economically viable, safe, environmentally friendly, proliferation–resistant and sustainable. Natural uranium is one of the basic raw materials for nuclear fuel. And so with this in mind we have come together here to participate in the 2009 International Symposium on Uranium Raw Material for the Nuclear Fuel Cycle, URAM- 2009. This is the latest in a series of symposia devoted to issues relating to the Uranium Production Cycle (UPC) and many of you will have been at the two previous meetings in 2000 and 2005. Looking back on those meetings we should remember how the intensity and scale of activity in the uranium production cycle has changed since 2000. At that symposium we were looking at how to keep the industry going whilst cleaning up the legacies of the past, ensuring minimal environmental problems for operating mines then and into the future and working out how the long term future of the industry would look. In addition we also considered the issues of maintaining our skills base and ensuring that exploration would continue so we might be prepared for the future.

The standardization of data relational mode in the materials database for nuclear power engineering

International Nuclear Information System (INIS)

Wang Xinxuan

1996-01-01

A relational database needs standard data relation ships. The data relation ships include hierarchical structures and repeat set records. Code database is created and the relational database is created between spare parts and materials and properties of the materials. The data relation ships which are not standard are eliminated and all the relation modes are made to meet the demands of the 3NF (Third Norm Form)

Regulatory policy issues and the Clean Air Act: Issues and papers from the state implementation workshops

Energy Technology Data Exchange (ETDEWEB)

Rose, K. [ed.; Burns, R.E.

1993-07-01

The National Regulatory Research Institute (NRRI), with funding from the US Environmental Protection Agency (EPA) and the US Department of Energy (DOE), conducted four regional workshops` on state public utility commission implementation of the Clean Air Act Amendments of 1990 (CAAA). The workshops had four objectives: (1) to discuss key issues and concerns on CAAA implementation, (2) to encourage a discussion among states on issues of common interests, (3) to attempt to reach consensus, where possible, on key issues, and (4) to provide the workshop participants with information and materials to assist in developing state rules, orders, and procedures. From the federal perspective, a primary goal was to ensure that workshop participants return to their states with a comprehensive background and understanding of how state commission actions may affect implementation of the CAAA and to be able to provide guidance to their jurisdictional utilities. It was hoped that this would reduce some of the uncertainty utilities face and assist in the development of an efficient allowance market. This report is divided into two main sections. In Section II, eleven principal issues are identified and discussed. These issues were chosen because they were either the most frequently discussed or they were related to the questions asked in response to the speakers` presentations. This section does not cover all the issues relevant to state implementation nor all the issues discussed at the workshops; rather, Section II is intended to provide an overview of the,planning, ratemaking, and multistate issues. Part III is a series of workshop papers presented by some of the speakers. Individual papers have been cataloged separately.

NuPEER Dijon 2005 Symposium. Ageing issues in nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Emond, David (ed.) [BCCN, Autorite de Surete Nucleaire, ASN, 6, place du Colonel Bourgoin, 75572 Paris Cedex 12 (France)

2005-07-01

The French Nuclear Safety Authority (ASN) organized an international symposium on regulatory aspects of ageing issues for nuclear pressure equipment. The ageing of nuclear pressure equipment is an issue of growing importance for nuclear regulators and material experts worldwide as age-related degradation of major pressure-retaining components challenges the remaining operating life of nuclear power plants. This symposium aimed at providing a forum for technical exchange among the staffs responsible for nuclear pressure equipment within the safety authorities and the associated expertise organisations. The contents of the symposium is as follows: 1. Control and supervision of safety of nuclear pressure equipment in France and abroad; 1.1. Position of the French Nuclear Safety Authority (1 paper); 1.2. Regulatory practices worldwide (4 papers); 1.3. Licence renewal: Field experience (2 papers); 1.4. Role of international organisations (1 paper); 2. Management of equipment and materials: From design to degradation mechanisms; 2.1. Operation and equipment (4 papers); 2. Evolution of materials (4 papers); 2.3. Fatigue degradation mechanisms (3 papers); 2.4. Contribution of research and development (4 papers); 3. In-service inspection: Evolutions, methods and strategies; 3.1. Methods and evolution (1 paper); 3.2. Qualification of methods (2 papers); 3.3. Surveillance strategies (2 papers); 4. Testimonies and points of view of utilities (3 papers); 5. Ageing issues taken into account in non nuclear fields (2 papers). The symposium began with workshops devoted to: Operation and equipment; Behaviour of materials; Fatigue degradations; Contributions of research and development. The symposium continued with plenary session that addressed the following issues: Control and supervision of safety of nuclear pressure equipment; Role of international organisations; In-service inspection: Objectives, methods and strategies; Point of view of utilities; Technical summary and

Awareness of legal and social issues related to reproductive health among adolescent girls in rural Varanasi.

Science.gov (United States)

Kansal, Sangeeta; Singh, Sweta; Kumar, Alok

2017-01-01

Data on awareness of adolescent's on the legal and social issues/acts related to reproductive health, especially in rural areas, are scarce. The aim of the present cross-sectional study is to assess the awareness level of legal and social issues related to reproductive health and its association with the various individual and family/household level characteristics. 650 adolescent girls in the age group of 15-19 years were interviewed with the help of pretested and semistructured questionnaire and focus group discussions were also conducted for qualitative findings in Chiraigaon block of district Varanasi. It was observed that 42.9% of the respondents were aware of legal age of marriage, 14.9% knew about the right age of childbearing. Dowry prohibition act and domestic violence act were known to 46% and 27% respondents, respectively, and only 2.6% were aware of medical termination of pregnancy act. Logistic regression analysis shows the significant effect of education on awareness of legal age of marriage, right age of childbearing, domestic violence, and dowry prohibition acts, which is also supported by qualitative findings. All the important legal issues/acts should be included in high school curriculum and female teachers should be involved in training program for adolescents. Role of mass media in creating awareness about these issues in their routine programs should be ascertained. Accredited Social Health Activist and Anganwadi workers should be aware of and include these issues/acts in adolescent meetings.

Meeting the challenges related to material issues in chemical ...

Indian Academy of Sciences (India)

1mpy unit, one thousandth of an inch per year, is used throughout the paper for the convenience of engineering personnel. ..... Platinum and Pt–Ir coatings were prepared by ..... to support the steam-dryer/separator assembly, and the bottom is welded with a flange to ..... spider's web, the abalone shell and the tortoise shell.

Bulletin of Materials Science | News

Indian Academy of Sciences (India)

Home; Journals; Bulletin of Materials Science; Volume 26; Issue 5. Issue front cover thumbnail. Volume 26, Issue 5. August 2003, pages 461-568. pp 461-464 Sensor Materials. Preparation, characterization and dielectric behaviour of some yttrium doped strontium stannates · P K Bajpai Kuldeep Ratre Mukul Pastor T P ...

Experimental Measurement of Relative Permeability Functions for Fuel Cell GDL Materials

KAUST Repository

Hussaini, Irfan; Wang, Chao-Yang

2009-01-01

Gas diffusion layer in PEM fuel cells plays a pivotal role in water management. Modeling of liquid water transport through the GDL relies on knowledge of relative permeability functions in the in-plane and through-plane directions. In the present work, air and water relative permeabilities are experimentally determined as functions of saturation for typical GDL materials such as Toray-060, -090, -120 carbon paper and E-Tek carbon cloth materials in their plain, untreated forms. Saturation is measured using an ex-situ gravimetric method. Absolute and relative permeability functions in the two directions of interest are presented. Significant departure from the generally assumed cubic function of saturation is observed. ©The Electrochemical Society.

Approved reference and testing materials for use in Nuclear Waste Management Research and Development Programs

International Nuclear Information System (INIS)

Mellinger, G.B.; Daniel, J.L.

1984-12-01

This document, addressed to members of the waste management research and development community summarizes reference and testing materials available from the Nuclear Waste Materials Characterization Center (MCC). These materials are furnished under the MCC's charter to distribute reference materials essential for quantitative evaluation of nuclear waste package materials under development in the US. Reference materials with known behavior in various standard waste management related tests are needed to ensure that individual testing programs are correctly performing those tests. Approved testing materials are provided to assist the projects in assembling materials data base of defensible accuracy and precision. This is the second issue of this publication. Eight new Approved Testing Materials are listed, and Spent Fuel is included as a separate section of Standard Materials because of its increasing importance as a potential repository storage form. A summary of current characterization information is provided for each material listed. Future issues will provide updates of the characterization status of the materials presented in this issue, and information about new standard materials as they are acquired. 7 references, 1 figure, 19 tables

Drug Abuse on College Campuses: Emerging Issues. Issues in Prevention

Science.gov (United States)

Higher Education Center for Alcohol, Drug Abuse, and Violence Prevention, 2012

2012-01-01

This "Issues in Prevention" focuses on emerging issues concerning drug abuse on college campuses. This issue contains the following articles: (1) Drug Abuse Trends; (2) Q&A With Jim Lange; (3) Bath Salts; (4) Refuse to Abuse; (5) Related Federal Resource; and (6) Higher Education Center Resources.

Reciprocal relations of transport coefficients in simple materials

International Nuclear Information System (INIS)

Lam, L.

1977-01-01

The cross effects of viscosity and heat conduction in anisotropic simple materials (solids or liquids) are given in the linear regime, using our dissipation function theory introduced recently. Depending on whether the temperature gradient or the heat flux is used in the dissipation function, we show that two different but unambiguous reciprocal relations between the transport coefficients follow. These are compared and contrasted with the confusing predictions from the Onsager theory, and to the results of rational thermodynamics. The uncertain experimental situation in regard to these reciprocal relations is discussed. Experimental tests are strongly urged. (orig.) [de

Towards an Articulation of the Material and Visual Turn in Organization Studies

DEFF Research Database (Denmark)

Boxenbaum, Eva; Jones, Candace; Meyer, Renate

2018-01-01

Contemporary organizations increasingly rely on images, logos, videos, building materials, graphic and product design, and a range of other material and visual artifacts to compete, communicate, form identity and organize their activities. This Special Issue focuses on materiality and visuality...... on the articles in the special issue, we further explore the affordances and limits of the material and visual dimensions of organizing in relation to novelty. We conclude by pointing out theoretical avenues for advancing multimodal research, and discuss some of the ethical, pragmatic and identity...... in the course of objectifying and reacting to novel ideas, and, more broadly, contributes to organizational theory by articulating the emergent contours of a material and visual turn in the study of organizations. In this Introduction, we provide an overview of research on materiality and visuality. Drawing...

Inter-organizational future proof EHR systems. A review of the security and privacy related issues.

Science.gov (United States)

van der Linden, Helma; Kalra, Dipak; Hasman, Arie; Talmon, Jan

2009-03-01

Identification and analysis of privacy and security related issues that occur when health information is exchanged between health care organizations. Based on a generic scenario questions were formulated to reveal the occurring issues. Possible answers were verified in literature. Ensuring secure health information exchange across organizations requires a standardization of security measures that goes beyond organizational boundaries, such as global definitions of professional roles, global standards for patient consent and semantic interoperable audit logs. As to be able to fully address the privacy and security issues in interoperable EHRs and the long-life virtual EHR it is necessary to realize a paradigm shift from storing all incoming information in a local system to retrieving information from external systems whenever that information is deemed necessary for the care of the patient.

Pharmaceutical Applications of Polymeric Nano materials

International Nuclear Information System (INIS)

Wu, L.; Sun, L.

2011-01-01

With significant attention focused on nano science and nano technology in recent years, nano materials have been used in a wide variety of applications such as automotive, environmental, energy, catalysis, biomedical, drug delivery, and polymeric industries. Among those fields, the application of nano materials with pharmaceutical science is an emerging and rapidly growing field and has drawn increasing attention recently. Research and development in this field is mainly focused on several aspects such as the discoveries of novel functional nano materials, exploration on nanoparticles with controlled and targeted drug delivery characteristics, and investigation of bio functionalized and diagnostic nano materials. In this special issue, we have invited a few papers related to recent advances in pharmaceutical application of polymeric nano materials

Current ethical and legal issues in health-related direct-to-consumer genetic testing.

Science.gov (United States)

Niemiec, Emilia; Kalokairinou, Louiza; Howard, Heidi Carmen

2017-09-01

A variety of health-related genetic testing is currently advertized directly to consumers. This article provides a timely overview of direct-to-consumer genetic testing (DTC GT) and salient ethical issues, as well as an analysis of the impact of the recently adopted regulation on in vitro diagnostic medical devices on DTC GT. DTC GT companies currently employ new testing approaches, report on a wide spectrum of conditions and target new groups of consumers. Such activities raise ethical issues including the questionable analytic and clinical validity of tests, the adequacy of informed consent, potentially misleading advertizing, testing in children, research uses and commercialization of genomic data. The recently adopted regulation on in vitro diagnostic medical devices may limit the offers of predisposition DTC GT in the EU market.

Representations of the Americans with Disabilities Act Employment-Related Issues in the Wall Street Journal (1990-2008): A Feasibility Study

Science.gov (United States)

Soffer, Michal; Rimmerman, Arie

2012-01-01

This feasibility study examines the coverage of employment-related issues related to people with disabilities in the Americans with Disabilities Act of 1990. The study is a first in a series of future studies focusing on disability issues in the international economic media. A survey of 39 newspaper articles published in the "Wall Street…

Evaluation of systems interactions in nuclear power plants: Technical findings related to Unresolved Safety Issue A-17

International Nuclear Information System (INIS)

Thatcher, D.

1989-05-01

This report presents a summary of the activities related to Unresolved Safety Issue (USI)A-17, ''Systems Interactions in Nuclear Power Plants,'' and also includes the NRC staff's conclusions based on those activities. The staff's technical findings provide the framework for the final resolution of this unresolved safety issue. The final resolution will be published later as NUREG-1229. 52 refs., 4 tabs

Monitoring asthma in childhood: management-related issues

Directory of Open Access Journals (Sweden)

Bart L. Rottier

2015-06-01

Full Text Available Management-related issues are an important aspect of monitoring asthma in children in clinical practice. This review summarises the literature on practical aspects of monitoring including adherence to treatment, inhalation technique, ongoing exposure to allergens and irritants, comorbid conditions and side-effects of treatment, as agreed by the European Respiratory Society Task Force on Monitoring Asthma in Childhood. The evidence indicates that it is important to discuss adherence to treatment in a non-confrontational way at every clinic visit, and take into account a patient's illness and medication beliefs. All task force members teach inhalation techniques at least twice when introducing a new inhalation device and then at least annually. Exposure to second-hand tobacco smoke, combustion-derived air pollutants, house dust mites, fungal spores, pollens and pet dander deserve regular attention during follow-up according to most task force members. In addition, allergic rhinitis should be considered as a cause for poor asthma control. Task force members do not screen for gastro-oesophageal reflux and food allergy. Height and weight are generally measured at least annually to identify individuals who are susceptible to adrenal suppression and to calculate body mass index, even though causality between obesity and asthma has not been established. In cases of poor asthma control, before stepping up treatment the above aspects of monitoring deserve closer attention.

Materials and design bases issues in ASME Code Case N-47

International Nuclear Information System (INIS)

Huddleston, R.L.; Swindeman, R.W.

1993-04-01

A preliminary evaluation of the design bases (principally ASME Code Case N-47) was conducted for design and operation of reactors at elevated temperatures where the time-dependent effects of creep, creep-fatigue, and creep ratcheting are significant. Areas where Code rules or regulatory guides may be lacking or inadequate to ensure the operation over the expected life cycles for the next-generation advanced high-temperature reactor systems, with designs to be certified by the US Nuclear Regulatory Commission, have been identified as unresolved issues. Twenty-two unresolved issues were identified and brief scoping plans developed for resolving these issues

The nuclear controversy-what are the issues

International Nuclear Information System (INIS)

Wyatt, A.

1976-01-01

The various issues raised by anti-nuclear groups are outlined and rebutted. Issues are grouped under four headingss - Economic; Technical; Social/Ethical/Moral; Political. Issues debated under economic aspects include conservation, unemployment resulting from energy use, use of alternative enrgy sources, high capital cost of nuclear power, high energy consumption in construction of plants, performance unreliability, depletion of uranium and excessive cost of decommissioning. Technically related issues, reactor safety, possibility of nuclear power plant explosion, waste managment, toxicity of plutonium, emission of radioactive material, thermal pollution and environmental effect of heavy water production are also discussed. Social/ethical/moral issues rebutted include radiation effects on health and genetic effects, deaths among uranium miners, morality of long-term waste storage, lack of faith in technical solutions and technical people, opposition to current life style, secrecy of information, nuclear proliferation and unsuitability of nuclear technology to the needs of developing countries. Political issues discussed are sabotage/terrorism possibilites, police state tactics in protection of nuclear facilities, misuse of technolgy by society, high energy society is capitalist and low energy society is Marxist, centralization of power, need for a great nuclear debate and the question of who pays for safety. Scientists and technical people are called upon to debate in their areas of specialty and are cautioned to be aware of tactics involved in meeting challengers head-on. (J.T.A.)

Issues related to a programme of activities under the CDM

Energy Technology Data Exchange (ETDEWEB)

Ellis, J.

2006-05-15

Emissions of CO2 from the energy and land-use change and forestry sectors are responsible for the majority of emissions in non-Annex I Parties to the UNFCCC. Tackling greenhouse gas (GHG) emissions from these sectors is a key to slowing the growth in GHG emissions in non-Annex I countries. Implementing Clean Development Mechanism (CDM) projects can help achieve this aim, while also assisting non-Annex I countries to move towards sustainable development and Annex I countries achieve their emission commitments under the Kyoto Protocol. There has been rapid progress in the CDM over the last year - in terms of the number of projects in the pipeline and registered, and in terms of credits issued. However, some important sectors are notable by their small share in the CDM portfolio. Several countries have also called attention to the need to accelerate the process of approving CDM methodologies and projects. In order to improve the effectiveness of the CDM to achieve its dual objectives, the COP/MOP agreed a decision on 'further guidance relating to the clean development mechanism. This decision lays out guidance on how to improve the operation of the CDM, and includes provisions that allow: (1) Bundling of project activities; and (2) Project activities under a programme of activities, to be registered as a CDM project activity. At present, of the 172 currently registered CDM project activities, 27 involve programmes or bundles. These project activities can include more than one project type, be implemented in several locations, and/or occur in more than one sector. This paper assesses how project activities under a programme of activities under the CDM (referred to here as PCDM) could help to increase the effectiveness of the CDM by encouraging a wide spread of emission mitigation activities. This paper also explores the key issues that may need to be considered for the PCDM concept to be further implemented. The paper concludes that: (1) Key concepts and issues

Jordan: U.S. Relations and Bilateral Issues

Science.gov (United States)

2007-01-25

bring about a compromise solution to Iraq’s sectarian violence and insurgency. Nevertheless, should the Administration heed the main recommendations of...Committee (NLC), a New York-based human rights advocacy group, issued a 161-page report alleging sweatshop -like conditions in 28 out of 100 Qualified

78 FR 33843 - Request for Comments on Issues Related to Incidental Findings That Arise in the Clinical...

Science.gov (United States)

2013-06-05

... specific bioethical, legal, and social issues related to potential scientific and technological advances... related areas of science and technology. The Bioethics Commission is charged with identifying and... establishing ``no return'' policies, or stipulations in advance of clinical intervention, research, and/or...

Y-12 Integrated Materials Management System

Energy Technology Data Exchange (ETDEWEB)

Alspaugh, D. H.; Hickerson, T. W.

2002-06-03

The Integrated Materials Management System, when fully implemented, will provide the Y-12 National Security Complex with advanced inventory information and analysis capabilities and enable effective assessment, forecasting and management of nuclear materials, critical non-nuclear materials, and certified supplies. These capabilities will facilitate future Y-12 stockpile management work, enhance interfaces to existing National Nuclear Security Administration (NNSA) corporate-level information systems, and enable interfaces to planned NNSA systems. In the current national nuclear defense environment where, for example, weapons testing is not permitted, material managers need better, faster, more complete information about material properties and characteristics. They now must manage non-special nuclear material at the same high-level they have managed SNM, and information capabilities about both must be improved. The full automation and integration of business activities related to nuclear and non-nuclear materials that will be put into effect by the Integrated Materials Management System (IMMS) will significantly improve and streamline the process of providing vital information to Y-12 and NNSA managers. This overview looks at the kinds of information improvements targeted by the IMMS project, related issues, the proposed information architecture, and the progress to date in implementing the system.

Y-12 Integrated Materials Management System

International Nuclear Information System (INIS)

Alspaugh, D. H.; Hickerson, T. W.

2002-01-01

The Integrated Materials Management System, when fully implemented, will provide the Y-12 National Security Complex with advanced inventory information and analysis capabilities and enable effective assessment, forecasting and management of nuclear materials, critical non-nuclear materials, and certified supplies. These capabilities will facilitate future Y-12 stockpile management work, enhance interfaces to existing National Nuclear Security Administration (NNSA) corporate-level information systems, and enable interfaces to planned NNSA systems. In the current national nuclear defense environment where, for example, weapons testing is not permitted, material managers need better, faster, more complete information about material properties and characteristics. They now must manage non-special nuclear material at the same high-level they have managed SNM, and information capabilities about both must be improved. The full automation and integration of business activities related to nuclear and non-nuclear materials that will be put into effect by the Integrated Materials Management System (IMMS) will significantly improve and streamline the process of providing vital information to Y-12 and NNSA managers. This overview looks at the kinds of information improvements targeted by the IMMS project, related issues, the proposed information architecture, and the progress to date in implementing the system

The Relative Impact of Aligning Tier 2 Intervention Materials with Classroom Core Reading Materials in Grades K-2

Science.gov (United States)

Foorman, Barbara R.; Herrera, Sarah; Dombek, Jennifer

2018-01-01

This randomized controlled trial in 55 low-performing schools across Florida compared 2 early literacy interventions--1 using stand-alone materials and 1 using materials embedded in the existing core reading/language arts program. A total of 3,447 students who were below the 30th percentile in vocabulary and reading-related skills participated in…

A systematic concept of assuring structural integrity of components and parts for applying to highly ductile materials through brittle material

International Nuclear Information System (INIS)

Suzuki, Kazuhiko

2007-09-01

Concepts of assuring structural integrity of plant components have been developed under limited conditions of either highly ductile or brittle materials. There are some cases where operation in more and more severe conditions causes a significant reduction in ductility for materials with a high ductility before service. Use of high strength steels with relatively reduced ductility is increasing as industry applications. Current concepts of structural integrity assurance under the limited conditions of material properties or on the requirement of no significant changes in material properties even after long service will fail to incorporate expected technological innovations. A systematic concept of assuring the structural integrity should be developed for applying to highly ductile materials through brittle materials. Objectives of the on-going research are to propose a detail of the systematic concept by considering how we can develop the concept without restricting materials and for systematic considerations on a broad range of material properties from highly ductile materials through brittle materials. First, background of concepts of existing structural codes for components of highly ductile materials or for structural parts of brittle materials are discussed. Next, issues of existing code for parts of brittle materials are identified, and then resolutions to the issues are proposed. Based on the above-mentioned discussions and proposals, a systematic concept is proposed for application to components with reduced ductility materials and for applying to components of materials with significantly changing material properties due to long service. (author)

Effect of generic issues program on improving safety

International Nuclear Information System (INIS)

Fard, M. R.; Kauffman, J. V.

2010-01-01

The U.S. Nuclear Regulatory Commission (NRC) identifies (by its assessment of plant operation) certain issues involving public health and safety, the common defense and security, or the environment that could affect multiple entities under NRC jurisdiction. The Generic Issues Program (GIP) addresses the resolution of these Generic Issues (GIs). The resolution of these issues may involve new or revised rules, new or revised guidance, or revised interpretation of rules or guidance that affect nuclear power plant licensees, nuclear material certificate holders, or holders of other regulatory approvals. U.S. NRC provides information related to the past and ongoing GIP activities to the general public by the use of three main resources, namely NUREG-0933, 'Resolution of Generic Safety Issues, ' Generic Issues Management Control System (GIMCS), and GIP public web page. GIP information resources provide information such as historical information on resolved GIs, current status of the open GIs, policy documents, program procedures, GIP annual and quarterly reports and the process to contact GIP and propose a GI This paper provides an overview of the GIP and several examples of safety improvements resulting from the resolution of GIs. In addition, the paper provides a brief discussion of a few recent GIs to illustrate how the program functions to improve safety. (authors)

Attitudes toward euthanasia and related issues among physicians and patients in a multi-cultural society of Malaysia

Directory of Open Access Journals (Sweden)

Mohammad Yousuf Rathor

2014-01-01

Full Text Available Introduction: Due to globalization and changes in the health care delivery system, there has been a gradual change in the attitude of the medical community as well as the lay public toward greater acceptance of euthanasia as an option for terminally ill and dying patients. Physicians in developing countries come across situations where such issues are raised with increasing frequency. As euthanasia has gained world-wide prominence, the objectives of our study therefore were to explore the attitude of physicians and chronically ill patients toward euthanasia and related issues. Concomitantly, we wanted to ascertain the frequency of requests for assistance in active euthanasia. Materials and Methods: Questionnaire based survey among consenting patients and physicians. Results: The majority of our physicians and patients did not support active euthanasia or physician-assisted suicide (EAS, no matter what the circumstances may be P < 0.001. Both opposed to its legalization P < 0.001. Just 15% of physicians reported that they were asked by patients for assistance in dying. Both physicians 29.2% and patients 61.5% were in favor of withdrawing or withholding life-sustaining treatment to a patient with no chances of survival. Among patients no significant differences were observed for age, marital status, or underlying health status. Conclusions: A significant percentage of surveyed respondents were against EAS or its legalization. Patient views were primarily determined by religious beliefs rather than the disease severity. More debates on the matter are crucial in the ever-evolving world of clinical medicine.

FOREWORD: Materials metrology Materials metrology

Science.gov (United States)

Bennett, Seton; Valdés, Joaquin

2010-04-01

It seems that so much of modern life is defined by the materials we use. From aircraft to architecture, from cars to communications, from microelectronics to medicine, the development of new materials and the innovative application of existing ones have underpinned the technological advances that have transformed the way we live, work and play. Recognizing the need for a sound technical basis for drafting codes of practice and specifications for advanced materials, the governments of countries of the Economic Summit (G7) and the European Commission signed a Memorandum of Understanding in 1982 to establish the Versailles Project on Advanced Materials and Standards (VAMAS). This project supports international trade by enabling scientific collaboration as a precursor to the drafting of standards. The VAMAS participants recognized the importance of agreeing a reliable, universally accepted basis for the traceability of the measurements on which standards depend for their preparation and implementation. Seeing the need to involve the wider metrology community, VAMAS approached the Comité International des Poids et Mesures (CIPM). Following discussions with NMI Directors and a workshop at the BIPM in February 2005, the CIPM decided to establish an ad hoc Working Group on the metrology applicable to the measurement of material properties. The Working Group presented its conclusions to the CIPM in October 2007 and published its final report in 2008, leading to the signature of a Memorandum of Understanding between VAMAS and the BIPM. This MoU recognizes the work that is already going on in VAMAS as well as in the Consultative Committees of the CIPM and establishes a framework for an ongoing dialogue on issues of materials metrology. The question of what is meant by traceability in the metrology of the properties of materials is particularly vexed when the measurement results depend on a specified procedure. In these cases, confidence in results requires not only traceable

A special issue on solar cells

Institute of Scientific and Technical Information of China (English)

Yi-Bing CHENG

2011-01-01

@@ The increasing demand for renewable energy has made the solar cell technology as one of the most significantresearch and development areas of today.Silicon based solar cells are the dominant photovoltaic products at the present time, but the relatively high costs are barriers for their broad applications.Research has been active worldwide in developing other photovoltaic technologies that use cheap materials and can be easily manufactured.Organic solar cells have attracted a lot of interests recently due to their potential to be low cost photovoltaic technologies.This special issue of the Frontiers of Optoelectronics in China has collected research articles by a number of Chinese and international experts.It is aimed to broaden the readers' view about some of the recent developments and challenges in this important R&D field.Thirteen excellent papers are in this special issue including 4 review articles and 9 research articles.

Lower life satisfaction related to materialism in children frequently exposed to advertising.

Science.gov (United States)

Opree, Suzanna J; Buijzen, Moniek; Valkenburg, Patti M

2012-09-01

Research among adults suggests that materialism and life satisfaction negatively influence each other, causing a downward spiral. So far, cross-sectional research among children has indicated that materialistic children are less happy, but causality remains uncertain. This study adds to the literature by investigating the longitudinal relation between materialism and life satisfaction. We also investigated whether their relation depended on children's level of exposure to advertising. A sample of 466 children (aged 8-11; 55% girls) participated in a 2-wave online survey with a 1-year interval. We asked children questions about material possessions, life satisfaction, and advertising. We used structural equation modeling to study the relationship between these variables. For the children in our sample, no effect of materialism on life satisfaction was observed. However, life satisfaction did have a negative effect on materialism. Exposure to advertising facilitated this effect: We only found an effect of life satisfaction on materialism for children who were frequently exposed to advertising. Among 8- to 11-year-old children, life satisfaction leads to decreased materialism and not the other way around. However, this effect only holds for children who are frequently exposed to television advertising. It is plausible that the material values portrayed in advertising teach children that material possessions are a way to cope with decreased life satisfaction. It is important to reduce this effect, because findings among adults suggest that materialistic children may become less happy later in life. Various intervention strategies are discussed.

Rethinking Critical Voice: Materiality and Situated Knowledges.

Science.gov (United States)

Wood, Julia T.; Cox, Robert

1993-01-01

Responds to several essays in the same journal issue. Suggests distinct yet equally important roles of theory and lived experience, concepts, and materiality in speech communication research. Argues for an engaged scholarly attitude that views the self as relational, others' accounts as valid, research as self-critical, and judgment as a…

Key issues of public relations of Europe: findings from the European Communication Monitor 2007-2014

NARCIS (Netherlands)

Verčič, D.; Verhoeven, P.; Zerfass, A.

2014-01-01

European Communication Monitor is the largest longitudinal research project in public relations practice in the world. Data collected annually from 2007 to 2014 show that practitioners perceive five issues as the most important for their work: linking business strategy and communication, coping with

Contact materials for nanoelectronics

KAUST Repository

Alshareef, Husam N.

2011-02-01

In this article, we review current research activities in contact material development for electronic and nanoelectronic devices. A fundamental issue in contact materials research is to understand and control interfacial reactions and phenomena that modify the expected device performance. These reactions have become more challenging and more difficult to control as new materials have been introduced and as device sizes have entered the deep nanoscale. To provide an overview of this field of inquiry, this issue of MRS Bulletin includes articles on gate and contact materials for Si-based devices, junction contact materials for Si-based devices, and contact materials for alternate channel substrates (Ge and III-V), nanodevices. © 2011 Materials Research Society.

Research Article Special Issue

African Journals Online (AJOL)

pc

2018-04-16

Apr 16, 2018 ... The dimensions to business process strategy factors are .... Investigation pains directed at further exploring these issues are very ... relationship management, material flow management, corporate culture in SMEs' Customer.

Quantum formulation for nanoscale optical and material chirality: symmetry issues, space and time parity, and observables

Science.gov (United States)

Andrews, D. L.

2018-03-01

To properly represent the interplay and coupling of optical and material chirality at the photon-molecule or photon-nanoparticle level invites a recognition of quantum facets in the fundamental aspects and mechanisms of light-matter interaction. It is therefore appropriate to cast theory in a general quantum form, one that is applicable to both linear and nonlinear optics as well as various forms of chiroptical interaction including chiral optomechanics. Such a framework, fully accounting for both radiation and matter in quantum terms, facilitates the scrutiny and identification of key issues concerning spatial and temporal parity, scale, dissipation and measurement. Furthermore it fully provides for describing the interactions of structured or twisted light beams with a vortex character, and it leads to the complete identification of symmetry conditions for materials to provide for chiral discrimination. Quantum considerations also lend a distinctive perspective to the very different senses in which other aspects of chirality are recognized in metamaterials. Duly attending to the symmetry principles governing allowed or disallowed forms of chiral discrimination supports an objective appraisal of the experimental possibilities and developing applications.

Magnetic fusion energy plasma interactive and high heat flux components. Volume II. Technical assessment of the critical issues and problem areas in high heat flux materials and component development

International Nuclear Information System (INIS)

Abdou, M.A.; Boyd, R.D.; Easor, J.R.

1984-06-01

A technical assessment of the critical issues and problem areas for high heat flux materials and components (HHFMC) in magnetic fusion devices shows these problems to be of critical importance for the successful operation of near-term fusion experiments and for the feasibility and attractiveness of long-term fusion reactors. A number of subgroups were formed to assess the critical HHFMC issues along the following major lines: (1) source conditions, (2) systems integration, (3) materials and processes, (4) thermal hydraulics, (5) thermomechanical response, (6) electromagnetic response, (7) instrumentation and control, and (8) test facilities. The details of the technical assessment are presented in eight chapters. The primary technical issues and needs for each area are highlighted

Magnetic fusion energy plasma interactive and high heat flux components. Volume II. Technical assessment of the critical issues and problem areas in high heat flux materials and component development

Energy Technology Data Exchange (ETDEWEB)

Abdou, M.A.; Boyd, R.D.; Easor, J.R.; Gauster, W.B.; Gordon, J.D.; Mattas, R.F.; Morgan, G.D.; Ulrickson, M.A,; Watson, R.D.; Wolfer, W.G,

1984-06-01

A technical assessment of the critical issues and problem areas for high heat flux materials and components (HHFMC) in magnetic fusion devices shows these problems to be of critical importance for the successful operation of near-term fusion experiments and for the feasibility and attractiveness of long-term fusion reactors. A number of subgroups were formed to assess the critical HHFMC issues along the following major lines: (1) source conditions, (2) systems integration, (3) materials and processes, (4) thermal hydraulics, (5) thermomechanical response, (6) electromagnetic response, (7) instrumentation and control, and (8) test facilities. The details of the technical assessment are presented in eight chapters. The primary technical issues and needs for each area are highlighted.

Geoscience of the Built Environment: Pollutants and Materials Surfaces

Directory of Open Access Journals (Sweden)

Jorge Sanjurjo-Sánchez

2011-12-01

Full Text Available An overview of issues with environmental relevance that arise from the interaction between pollutants and surfaces of the built environment is presented in this paper. Two broad perspectives are considered: decay of materials and recording of pollution characteristics. In relation to the former, we consider the possible implications on human activities restrictions, materials and morphological options, consumption of resources and release of pollutants resulting from the alteration of materials, conservation and restoration procedures. In terms of pollution recording, the interest of the stony materials as passive monitors of pollution, the question of heterogeneous conditions on buildings and the interest of qualitative and quantitative studies are highlighted. The importance of longitudinal studies on new and cleaned surfaces is considered, both for the understanding of materials decay and for the assessment of pollution conditions. The use of tracers to record the characteristics of pollution sources, interaction with materials and pathways of pollutants is also discussed. Finally, some recommendations are presented, based on the issues discussed on this paper that might be relevant for environmental management programs, including environmental education.

Nonintrusive verification attributes for excess fissile materials

International Nuclear Information System (INIS)

Nicholas, N.J.; Eccleston, G.W.; Fearey, B.L.

1997-10-01

Under US initiatives, over two hundred metric tons of fissile materials have been declared to be excess to national defense needs. These excess materials are in both classified and unclassified forms. The US has expressed the intent to place these materials under international inspections as soon as practicable. To support these commitments, members of the US technical community are examining a variety of nonintrusive approaches (i.e., those that would not reveal classified or sensitive information) for verification of a range of potential declarations for these classified and unclassified materials. The most troublesome and potentially difficult issues involve approaches for international inspection of classified materials. The primary focus of the work to date has been on the measurement of signatures of relevant materials attributes (e.g., element, identification number, isotopic ratios, etc.), especially those related to classified materials and items. The authors are examining potential attributes and related measurement technologies in the context of possible verification approaches. The paper will discuss the current status of these activities, including their development, assessment, and benchmarking status

Synthesis, Properties, and Applications of Low-Dimensional Carbon-Related Nano materials

International Nuclear Information System (INIS)

Mostofizadeh, A.; Li, Y.; Song, B.; Huang, Y.; Mostofizadeh, A.

2011-01-01

In recent years, many theoretical and experimental studies have been carried out to develop one of the most interesting aspects of the science and nano technology which is called carbon-related nano materials. The goal of this paper is to provide a review of some of the most exciting and important developments in the synthesis, properties, and applications of low-dimensional carbon nano materials. Carbon nano materials are formed in various structural features using several different processing methods. The synthesis techniques used to produce specific kinds of low-dimensional carbon nano materials such as zero-dimensional carbon nano materials (including fullerene, carbon-encapsulated metal nanoparticles, nano diamond, and onion-like carbons), one-dimensional carbon nano materials (including carbon nano fibers and carbon nano tubes), and two-dimensional carbon nano materials (including graphene and carbon nano walls) are discussed in this paper. Subsequently, the paper deals with an overview of the properties of the mainly important products as well as some important applications and the future outlooks of these advanced nano materials.

Integration of generic issues

International Nuclear Information System (INIS)

Thatcher, D.

1989-01-01

The NRC has recognized the need to integrate generic issues (GIs). The GI process includes a number of phases, all of which should recognize the potential for overlap and conflict among related issues. In addition to the issues themselves, other related NRC and industry programs and activities need to be factored into the GI process. Integration has taken place, or is taking place, for a number of GIs. Each case of integration involves a specific set of circumstances and, as a result, the way in which integration proceeds can vary. This paper discusses the integration of issues in the generic issue process and provides a number of examples

Socio-materiality and modes of inquiry

DEFF Research Database (Denmark)

Buch, Anders

2018-01-01

have opted for explanatory strategies that span the spectrum from technological determinism to voluntarism. Contemporary theorizing of the problem has tried to avoid the extremes of the spectrum, and opted for a middle ground that leaves room for human agency while still recognizing the impact...... (SCOT), Actor-Network Theory (ANT), and Agential Realism. Whereas there is general agreement in STS that the social and the material is related there is no general agreement about how the socio-material relationship should be understood. Ontological, epistemological and methodological issues tend...

Large-scale Water-related Innovative Renewable Energy Projects and the Water Framework Directive : Legal Issues and Solutions

NARCIS (Netherlands)

van Hees, S.R.W.

2017-01-01

This article discusses two legal issues that relate to the conflict between the interest of protecting water quality under the Water Framework Directive (WFD), versus the interest of promoting the use of innovative water-related renewable energy, with regard to the quota in the Renewable Energy

75 FR 64710 - Joint Public Roundtable on Issues Related to the Clearing of Credit Default Swaps

Science.gov (United States)

2010-10-20

... certain issues related to the clearing of Credit Default Swaps in the context of the Agencies rulemaking... comments must be in English or be accompanied by an English translation. All submissions provided to either...

Effect of splenectomy on liver cirrhosis and related surgical issues

Directory of Open Access Journals (Sweden)

KONG Degang

2016-12-01

Full Text Available Patients with liver fibrosis and cirrhosis experience certain changes in spleen morphology and function, and there is always a controversy over whether to perform splenectomy in patients with liver cirrhosis. As a surgical treatment of recurrent portal hypertension complicated by esophagogastric variceal bleeding, splenectomy can reduce portal venous pressure, reduce the possibility of gastrointestinal bleeding, and correct the reduced white blood cell count and platelet count. It can also protect the liver by improving liver function, promoting regeneration of hepatocytes, and inhibiting the progression of liver fibrosis. With reference to available clinical and laboratory data, this article reviews the effect of splenectomy on the cirrhotic liver and related issues such as selection of surgical procedures and prevention and treatment of postoperative complications, in order to promote splenectomy in patients with liver cirrhosis.

Safety issues relating to the design of fusion power facilities

International Nuclear Information System (INIS)

Stasko, R.R.; Wong, K.Y.; Russell, S.B.

1986-06-01

In order to make fusion power a viable future source of energy, it will be necessary to ensure that the cost of power for fusion electric generation is competitive with advanced fission concepts. In addition, fusion power will have to live up to its original promise of being a more radiologically benign technology than fission, and be able to demonstrate excellent operational safety performance. These two requirements are interrelated, since the selection of an appropriate safety philosophy early in the design phase could greatly reduce or eliminate the capital costs of elaborate safety related and protective sytems. This paper will briefly overview a few of the key safety issues presently recognized as critical to the ultimate achievement of licensable, environmentally safe and socially acceptable fusion power facilities. 12 refs

Neutronics issues for a laboratory microfusion facility

International Nuclear Information System (INIS)

Tobin, M.T.

1987-01-01

Discussion concerning goals or design of the Laboratory Microfusion Facility (LMF) should include an understanding of the neutronics issues involved. We consider such aspects as first wall shielding requirements, safety standards as they will apply to such an Inertial Confinement Fusion (ICF) facility, and the interior chamber environment. The selection of materials for the first wall, neutron moderator and absorber, and gamma ray shielding is discussed. We conclude that water or carbon are the choices for bulk neutron moderation and boron placed just in front of the first wall the choice for neutron absorber. Selection of the in-chamber materials and diagnostic design will greatly affect the relative hazards after a shot. Lead is the high-Z material of choice and plastic expendables for the diagnostics. Although a poor gamma ray attenuator, carbon is the choice for this function since it also compensates for the direct neutron shine effects and does not itself activate. Electronics may need to be hardened to the prompt gamma and neutron dose

PWR composite materials use. A particular case of safety-related service water pipes

International Nuclear Information System (INIS)

Pays, M.F.; Le Courtois, T.

1997-11-01

This paper shows the present and future uses of composite materials in French nuclear and fossil-fuel power plants. Electricite de France has decided to install composite materials in service water piping in its future nuclear power plant (PWR) at Civaux (West of France) and for the firs time in France, in safety-related applications. A wide range of studies has been performed about the durability, the control and damage mechanisms of those materials under service conditions among an ongoing Research and Development project. The main results are presented under the following headlines: selection of basic materials and manufacturing processes; aging processes (mechanical behavior during 'lifetime'); design rules; non destructive examination during manufacturing process and during operation. The studies have been focused on epoxy pipings. The importance of strong quality insurance policy requirements are outlined. A study of the use of composite pipes in power plants (hydraulic, fossil fuel, and nuclear) in France and around the world (USA, Japan, Western Europe) are presented whether it be safety related or non safety-related applications. The different technical solutions for materials and manufacturing processes are presented and an economic comparison is made between steel and composite pipes. (author)

PWR composite materials use. A particular case of safety-related service water pipes

Energy Technology Data Exchange (ETDEWEB)

Pays, M.F.; Le Courtois, T

1997-11-01

This paper shows the present and future uses of composite materials in French nuclear and fossil-fuel power plants. Electricite de France has decided to install composite materials in service water piping in its future nuclear power plant (PWR) at Civaux (West of France) and for the firs time in France, in safety-related applications. A wide range of studies has been performed about the durability, the control and damage mechanisms of those materials under service conditions among an ongoing Research and Development project. The main results are presented under the following headlines: selection of basic materials and manufacturing processes; aging processes (mechanical behavior during `lifetime`); design rules; non destructive examination during manufacturing process and during operation. The studies have been focused on epoxy pipings. The importance of strong quality insurance policy requirements are outlined. A study of the use of composite pipes in power plants (hydraulic, fossil fuel, and nuclear) in France and around the world (USA, Japan, Western Europe) are presented whether it be safety related or non safety-related applications. The different technical solutions for materials and manufacturing processes are presented and an economic comparison is made between steel and composite pipes. (author) 2 refs.

Theorising international monetary relations: three questions about the significance of materiality

Directory of Open Access Journals (Sweden)

Anna Leander

2015-12-01

Full Text Available Abstract This article engages a conversation with Benjamin Cohen by raising three questions about the significance of materiality. The paper's questions focus on how materiality can be included in theorizations so that its political import is not defined away from the outset. The article does this focussing on Cohen's treatment of electronic money and its significance for the Politics of International Monetary Relations. The first question posed is about ontology, the second about agency and the third about the scope of politics. The three questions are raised as a conversation in which arguments and counterarguments are advanced. The questions are therefore posed with Cohen's contributions to theorizing the political significance of materiality as their point of departure. They are formulated as a consequence of bringing these contributions in relation to insights from the Social Studies of Finance. From this perspective it would seem that a more far reaching engagement with materiality (in terms of ontology, agency and epistemology is necessary to capture its political significance for international monetary politics and currency hierarchies. The article does not conclude in conventional fashion but purposefully strives to leave these questions open for discussion.

10 key indicators for the environment - Issue 2012

International Nuclear Information System (INIS)

2012-06-01

Ten indicators of the environment are briefly presented, discussed and illustrated by graphs indicating their evolution since the 1990's: air (air pollution in urban environment), biodiversity (number of common bird species), resources (consumption of materials), water (river pollution by phosphates and nitrates), land occupation (soil artificialization), wastes (urban wastes), climate (carbon dioxide emissions), economy (jobs in the environmental sector), energy (share of renewable energies), and opinion (level of concern of French people regarding the different issues related to environment degradation)

U.S. nuclear fuel cycle regulatory issues on exclusion, exemption, and clearance

International Nuclear Information System (INIS)

Meck, R.A.

1997-01-01

The U.S. Nuclear Regulatory Commission is considering the use of exclusion and clearance in connection with the nuclear fuel cycle regulations. Clearance of licensed lands, buildings, structures, materials, and equipment could expose members of the public to radiation in addition to background. Establishing and implementing dose criteria for allowed concentrations of radioactivity in the various media raise challenging issues for the regulator. Clearance also raises significant regulatory issues, and these issues reflect trade-offs between concerns for protecting public health and safety, as well as other socioeconomic values and concerns. At the heart of the issues are the adequacy of risk analyses, acceptability of risks, underlying rationales, feasibility and cost of implementation, and exposures of the public to man-made radiation in relation to natural sources of radiation. (author)

Evaluating the Environmental Dimension of Material Efficiency Strategies Relating to the Circular Economy

Directory of Open Access Journals (Sweden)

Stuart Walker

2018-03-01

Full Text Available Material efficiency is a key element of new thinking to address the challenges of reducing impacts on the environment and of resource scarcity, whilst at the same time meeting service and functionality demands on materials. Directly related to material efficiency is the concept of the Circular Economy, which is based on the principle of optimising the utility embodied in materials and products through the life-cycle. Although materials such as steel, on account of high recycling rates at end-of-life, are amongst the most ‘circular’ of manufactured materials, significant opportunities for greater material efficiency exist, which are yet to be widely implemented. Life Cycle Assessment (LCA is commonly used to assess the environmental benefits of recovering and recycling materials through the manufacturing supply chain and at end-of-life. Using an example taken from renewable energy generation, this paper explores the correlation between product circularity and the environmental case for strategies designed to improve material efficiency. An LCA-based methodology for accounting for the recovery and reuse of materials from the supply chain and at end-of-life is used as the basis for calculating the carbon footprint benefits of five material efficiency scenarios. The results are compared with a number of proposed material circularity indicators. Two conclusions from this exercise are that (i LCA methodologies based around end-of-life approaches are well placed for quantifying the environmental benefits of material efficiency and circular economy strategies and (ii when applying indicators relating to the circularity of materials these should also be supported by LCA-based studies.

Tritium breeding materials

International Nuclear Information System (INIS)

Hollenberg, G.W.; Johnson, C.E.; Abdou, M.

1984-03-01

Tritium breeding materials are essential to the operation of D-T fusion facilities. Both of the present options - solid ceramic breeding materials and liquid metal materials are reviewed with emphasis not only on their attractive features but also on critical materials issues which must be resolved

Tritium breeding materials

International Nuclear Information System (INIS)

Hollenberg, G.W.; Johnson, C.E.; Abdou, M.A.

1984-01-01

Tritium breeding materials are essential to the operation of D-T fusion facilities. Both of the present options - solid ceramic breeding materials and liquid metal materials are reviewed with emphasis not only on their attractive features but also on critical materials issues which must be resolved

Readability evaluation of Internet-based patient education materials related to the anesthesiology field.

Science.gov (United States)

De Oliveira, Gildasio S; Jung, Michael; Mccaffery, Kirsten J; McCarthy, Robert J; Wolf, Michael S

2015-08-01

The main objective of the current investigation was to assess the readability of Internet-based patient education materials related to the field of anesthesiology. We hypothesized that the majority of patient education materials would not be written according to current recommended readability grade level. Online patient education materials describing procedures, risks, and management of anesthesia-related topics were identified using the search engine Google (available at www.google.com) using the terms anesthesia, anesthesiology, anesthesia risks, and anesthesia care. Cross-sectional evaluation. None. Assessments of content readability were performed using validated instruments (Flesch-Kincaid Grade Formulae, the Gunning Frequency of Gobbledygook, the New Dale-Chall Test, the Fry graph, and the Flesch Reading Ease score). Ninety-six Web sites containing Internet patient education materials (IPEMs) were evaluated. The median (interquartile range) readability grade level for all evaluated IPEMs was 13.5 (12.0-14.6). All the evaluated documents were classified at a greater readability level than the current recommended readability grade, P Internet-based patient education materials related to the field of anesthesiology are currently written far above the recommended readability grade level. High complexity of written education materials likely limits access of information to millions of American patients. Redesign of online content of Web sites that provide patient education material regarding anesthesia could be an important step in improving access to information for patients with poor health literacy. Copyright © 2015 Elsevier Inc. All rights reserved.

Some Materials Degradation Issues in the U.S. High-Level Nuclear Waste Repository Study (The Yucca Mountain Project)

Energy Technology Data Exchange (ETDEWEB)

F. Hua; P. Pasupathi; N. Brown; K. Mon

2005-09-19

The safe disposal of radioactive waste requires that the waste be isolated from the environment until radioactive decay has reduced its toxicity to innocuous levels for plants, animals, and humans. All of the countries currently studying the options for disposing of high-level nuclear waste (HLW) have selected deep geologic formations to be the primary barrier for accomplishing this isolation. In U.S.A., the Nuclear Waste Policy Act of 1982 (as amended in 1987) designated Yucca Mountain in Nevada as the potential site to be characterized for high-level nuclear waste (HLW) disposal. Long-term containment of waste and subsequent slow release of radionuclides into the geosphere will rely on a system of natural and engineered barriers including a robust waste containment design. The waste package design consists of a highly corrosion resistant Ni-based Alloy 22 cylindrical barrier surrounding a Type 316 stainless steel inner structural vessel. The waste package is covered by a mailbox-shaped drip shield composed primarily of Ti Grade 7 with Ti Grade 24 structural support members. The U.S. Yucca Mountain Project has been studying and modeling the degradation issues of the relevant materials for some 20 years. This paper reviews the state-of-the-art understanding of the degradation processes based on the past 20 years studies on Yucca Mountain Project (YMP) materials degradation issues with focus on interaction between the in-drift environmental conditions and long-term materials degradation of waste packages and drip shields within the repository system during the 10,000 years regulatory period. This paper provides an overview of the current understanding of the likely degradation behavior of the waste package and drip shield in the repository after the permanent closure of the facility. The degradation scenario discussed in this paper include aging and phase instability, dry oxidation, general and localized corrosion, stress corrosion cracking and hydrogen induced

Some Materials Degradation Issues in the U.S. High-Level Nuclear Waste Repository Study (The Yucca Mountain Project)

International Nuclear Information System (INIS)

Hua, F.; Pasupathi, P.; Brown, N.; Mon, K.

2005-01-01

The safe disposal of radioactive waste requires that the waste be isolated from the environment until radioactive decay has reduced its toxicity to innocuous levels for plants, animals, and humans. All of the countries currently studying the options for disposing of high-level nuclear waste (HLW) have selected deep geologic formations to be the primary barrier for accomplishing this isolation. In U.S.A., the Nuclear Waste Policy Act of 1982 (as amended in 1987) designated Yucca Mountain in Nevada as the potential site to be characterized for high-level nuclear waste (HLW) disposal. Long-term containment of waste and subsequent slow release of radionuclides into the geosphere will rely on a system of natural and engineered barriers including a robust waste containment design. The waste package design consists of a highly corrosion resistant Ni-based Alloy 22 cylindrical barrier surrounding a Type 316 stainless steel inner structural vessel. The waste package is covered by a mailbox-shaped drip shield composed primarily of Ti Grade 7 with Ti Grade 24 structural support members. The U.S. Yucca Mountain Project has been studying and modeling the degradation issues of the relevant materials for some 20 years. This paper reviews the state-of-the-art understanding of the degradation processes based on the past 20 years studies on Yucca Mountain Project (YMP) materials degradation issues with focus on interaction between the in-drift environmental conditions and long-term materials degradation of waste packages and drip shields within the repository system during the 10,000 years regulatory period. This paper provides an overview of the current understanding of the likely degradation behavior of the waste package and drip shield in the repository after the permanent closure of the facility. The degradation scenario discussed in this paper include aging and phase instability, dry oxidation, general and localized corrosion, stress corrosion cracking and hydrogen induced

The Asilomar Survey: Stakeholders? Opinions on Ethical Issues Related to Brain-Computer Interfacing

OpenAIRE

Nijboer, Femke; Clausen, Jens; Allison, Brendan Z.; Haselager, Pim

2011-01-01

Brain-Computer Interface (BCI) research and (future) applications raise important ethical issues that need to be addressed to promote societal acceptance and adequate policies. Here we report on a survey we conducted among 145 BCI researchers at the 4th International BCI conference, which took place in May–June 2010 in Asilomar, California. We assessed respondents’ opinions about a number of topics. First, we investigated preferences for terminology and definitions relating to BCIs. Second, w...

THE UNITED RESCUE SYSTEM IN BULGARIA. CURRENT RESOURCE RELATED ISSUES AND PROSPECTIVE SOLUTIONS

Directory of Open Access Journals (Sweden)

Daniela Baleva

2017-11-01

Full Text Available The article presents some problems related to securing the Bulgarian system for disaster management with the necessary resources for its proper functioning. The main challenges for the united rescue system in the country are analyzed, including those related to ensuring the system with the necessary material, financial and human resources. Some possibilities for solving these problems with the use of funds from the European Union are presented.

Epidemiological issues related to dose reconstruction

International Nuclear Information System (INIS)

Shore, R.E.

1996-01-01

When a dose reconstruction is performed around some nuclear site, a decision has to be made as to whether an epidemiologic study should be performed there and, if so, what form the study should take. The goal of this paper is to provide an overview of epidemiologic and biostatistical issues that help determine whether an epidemiologic study around a nuclear facility is worthwhile doing from a scientific standpoint. We are all aware that public health and sociopolitical concerns often assume considerable importance in these decisions, but they will not be considered here. 27 refs., 2 tabs

Special quasirandom structures for gadolinia-doped ceria and related materials

KAUST Repository

Wang, Hao; Chroneos, Alexander I.; Jiang, Chao; Schwingenschlö gl, Udo

2012-01-01

cells describing 9% and 12% gadolinia doped ceria. These SQS cells are transferable and can be used to model related materials such as yttria stabilized zirconia. To demonstrate the applicability of the method we use density functional theory

Collection development issues in the online environment

CERN Document Server

Su, Di

2006-01-01

Expand your knowledge of problems and possibilities with e-material acquisitions around the world to aid in making your own decisions The demand for electronic material in academic libraries is growing and shows no sign of abating. Collection Development Issues in the Online Environment addresses key issues in electronic materials development and presents cutting-edge practices from academic libraries around the world. Leading authorities reveal insights on both common and special concerns that every library administrator can use in making decisions about their own collections. The text also presents real-life case studies illustrating approaches that can be modified for effective planning of your own library acquisitions. The strategies are practical, the information clear and helpful, all of it contained in a single useful volume that every information science professional or academic can use. Collection Development Issues in the Online Environment is separated into three sections. The first section tackles...

Emerging nuclear security issues for transit countries

International Nuclear Information System (INIS)

Gabulov, I.A.

2003-01-01

Full text: Tragic events of September eleventh have made nuclear terrorism dangers more evident. In the light of increased terrorism preventing the spread of nuclear and nuclear related items as well as radioactive materials that can be used for production so-called 'dirty bomb'is an urgent global claim. Nuclear Security issues cover multiple aspects of the security and first of all the threat from nuclear terrorism, detection and protection of illicit trafficking of nuclear materials and other radioactive sources, legal shipment of such type materials as well as nuclear related dual use items. In the face of emerging threats the prevention of proliferation by the development of effective national system of nuclear export controls is hugely important for transit countries like Azerbaijan with underdeveloped export controls and strategic locations along trade and smuggling routes between nuclear suppliers States and countries attempting to develop nuclear weapons or any nuclear explosive devices. Thus, in the face of increasing international threat from nuclear terrorism the role and place of Azerbaijan Republic in the struggle against terrorism increases. In this context it is very important to establish effective national capabilities for detection and prevention of illicit trafficking of radioactive and nuclear materials as well as nuclear related dual use items across Azerbaijan's borders. One of the ways for enhancing and strengthening existing activities in this field is carrying out joint actions between scientists and enforcement officials in order to improve knowledge of the front-line customs and border guard inspectors concerning multiple aspects of Nuclear Security

Fusion Canada issue 10

International Nuclear Information System (INIS)

1990-02-01

A short bulletin from the National Fusion Program. Included in this issue is a report on Fusion Materials Research, ITER physics research, fusion performance record at JET, and design options for reactor building. 4 figs

Ethical issues in the development and implementation of nutrition-related public health policies and interventions: A scoping review

Science.gov (United States)

Peña-Rosas, Juan Pablo; Saxena, Abha; Zamora, Gerardo

2017-01-01

Background The limited integration of ethics in nutrition-related public health policies and interventions is one major concern for those who have the task of implementing them. Ethical challenges that are overlooked during the development of such interventions could raise serious ethical issues during their implementation and even after. As a result, these decision makers need technical support and ethical guidance for adaptation of interventions to local (cultural, social, economic, etc.) contexts. Aim The goal of this scoping review is to delineate and “map” the range of ethical issues in nutrition-related public health interventions, as well as the range of the various fields in which they may arise. Methods A scoping review of empirical research and conceptual literature was conducted following the framework of Arksey and O’Malley. Searches using PubMed with Medical Subject Headings (MeSH) categories and Advanced Search Builder as well as in the Global Health Library were performed. The final sample consists of 169 publications. Results The ethics of public health prevention or treatment of obesity and non-communicable diseases is the most explicitly and frequently discussed subject. In comparison, ethical issues raised by public health interventions in the fields of undernutrition, breastfeeding, vitamin/mineral supplementation and food fortification, food security, food sustainability and food safety are addressed in a lower proportion of the sample. The results illustrate the various natures, types, and scopes of existing public health nutrition-related interventions, and the various ethical issues that may be raised by these interventions, in addition to the numerous and different contexts in which they may be implemented. Discussion The ethical issues faced in the development and implementation of nutrition-related public health interventions are varied and cannot be equated with, nor generalized about, when dealing with specific activities in this

Ethical issues in the development and implementation of nutrition-related public health policies and interventions: A scoping review.

Science.gov (United States)

Hurlimann, Thierry; Peña-Rosas, Juan Pablo; Saxena, Abha; Zamora, Gerardo; Godard, Béatrice

2017-01-01

The limited integration of ethics in nutrition-related public health policies and interventions is one major concern for those who have the task of implementing them. Ethical challenges that are overlooked during the development of such interventions could raise serious ethical issues during their implementation and even after. As a result, these decision makers need technical support and ethical guidance for adaptation of interventions to local (cultural, social, economic, etc.) contexts. The goal of this scoping review is to delineate and "map" the range of ethical issues in nutrition-related public health interventions, as well as the range of the various fields in which they may arise. A scoping review of empirical research and conceptual literature was conducted following the framework of Arksey and O'Malley. Searches using PubMed with Medical Subject Headings (MeSH) categories and Advanced Search Builder as well as in the Global Health Library were performed. The final sample consists of 169 publications. The ethics of public health prevention or treatment of obesity and non-communicable diseases is the most explicitly and frequently discussed subject. In comparison, ethical issues raised by public health interventions in the fields of undernutrition, breastfeeding, vitamin/mineral supplementation and food fortification, food security, food sustainability and food safety are addressed in a lower proportion of the sample. The results illustrate the various natures, types, and scopes of existing public health nutrition-related interventions, and the various ethical issues that may be raised by these interventions, in addition to the numerous and different contexts in which they may be implemented. The ethical issues faced in the development and implementation of nutrition-related public health interventions are varied and cannot be equated with, nor generalized about, when dealing with specific activities in this field. More importantly, these ethical issues

Ethical issues in the development and implementation of nutrition-related public health policies and interventions: A scoping review.

Directory of Open Access Journals (Sweden)

Thierry Hurlimann

Full Text Available The limited integration of ethics in nutrition-related public health policies and interventions is one major concern for those who have the task of implementing them. Ethical challenges that are overlooked during the development of such interventions could raise serious ethical issues during their implementation and even after. As a result, these decision makers need technical support and ethical guidance for adaptation of interventions to local (cultural, social, economic, etc. contexts.The goal of this scoping review is to delineate and "map" the range of ethical issues in nutrition-related public health interventions, as well as the range of the various fields in which they may arise.A scoping review of empirical research and conceptual literature was conducted following the framework of Arksey and O'Malley. Searches using PubMed with Medical Subject Headings (MeSH categories and Advanced Search Builder as well as in the Global Health Library were performed. The final sample consists of 169 publications.The ethics of public health prevention or treatment of obesity and non-communicable diseases is the most explicitly and frequently discussed subject. In comparison, ethical issues raised by public health interventions in the fields of undernutrition, breastfeeding, vitamin/mineral supplementation and food fortification, food security, food sustainability and food safety are addressed in a lower proportion of the sample. The results illustrate the various natures, types, and scopes of existing public health nutrition-related interventions, and the various ethical issues that may be raised by these interventions, in addition to the numerous and different contexts in which they may be implemented.The ethical issues faced in the development and implementation of nutrition-related public health interventions are varied and cannot be equated with, nor generalized about, when dealing with specific activities in this field. More importantly, these

Research of beryllium safety issues

International Nuclear Information System (INIS)

Longhurst, G.R.; Anderl, R.A.; Dolan, T.J.; Hankins, M.R.; Pawelko, R.J.

1993-01-01

Beryllium has been identified as a leading contender for the plasma-facing material in ITER. Its use has some obvious advantages, but there are also a number of safety concerns associated with it. The Idaho National Engineering Laboratory (INEL) has undertaken a number of studies to help resolve some of these issues. One issue is the response of beryllium to neutron irradiation. We have tested samples irradiated in the Advanced Test Reactor (ATR) and are currently preparing to make measurements of the change in mechanical properties of beryllium samples irradiated at elevated temperatures in the Fast Flux Test Facility (FFTF) and the Experimental Breeder Reactor II (EBR-II) at the INEL. Mechanical tests will be conducted at the irradiation temperatures of 375-550 C. Other experiments address permeation and retention of implanted tritium in plasma-sprayed beryllium. In one test the porosity of the material allowed 0.12% of implanted ions and 0.17% of atoms from background gas pressure to pass through the foil with essentially no delay. For comparison, similar tests on fully dense hot-rolled, vacuum melted or sintered powder foils of high purity beryllium showed only 0.001% of implanting ions to pass through the foil, and then only after a delay of several hours. None of the molecular gas appeared to permeate these latter targets. An implication is that plasma-sprayed beryllium may substantially enhance recycling of tritium to the plasma provided it is affixed to a relatively impermeable substrate. (orig.)

Top-Ten IT Issues: 2009

Science.gov (United States)

Agee, Anne Scrivener; Yang, Catherine

2009-01-01

This article presents the top-ten IT-related issues in terms of strategic importance to the institution, as revealed by the tenth annual EDUCAUSE Current Issues Survey. These IT-related issues include: (1) Funding IT; (2) Administrative/ERP Information Systems; (3) Security; (4) Infrastructure/Cyberinfrastructure; (5) Teaching and Learning with…

Modeling issues associated with production reactor safety assessment

International Nuclear Information System (INIS)

Stack, D.W.; Thomas, W.R.

1990-01-01

This paper describes several Probabilistic Safety Assessment (PSA) modeling issues that are related to the unique design and operation of the production reactors. The identification of initiating events and determination of a set of success criteria for the production reactors is of concern because of their unique design. The modeling of accident recovery must take into account the unique operation of these reactors. Finally, a more thorough search and evaluation of common-cause events is required to account for combinations of unique design features and operation that might otherwise not be included in the PSA. It is expected that most of these modeling issues also would be encountered when modeling some of the other more unique reactor and nonreactor facilities that are part of the DOE nuclear materials production complex. 9 refs., 2 figs

Development of the structural materials information center

International Nuclear Information System (INIS)

Oland, C.B.; Naus, D.J.

1990-01-01

The U.S. Nuclear Regulatory Commission has initiated a Structural Aging Program at the Oak Ridge National Laboratory to identify potential structural safety issues related to continued service of nuclear power plants and to establish criteria for evaluating and resolving these issues. One of the tasks in this program focuses on the establishment of a Structural Materials Information Center where data and information on the time variation of concrete and other structural material properties under the influence of pertinent environmental stressors and aging factors are being collected and assembled into a database. This database will be used to assist in the prediction of potential long-term deterioration of critical structural components in nuclear power plants and to establish limits on hostile environmental exposure for these structures and materials. Two complementary database formats have been developed. The Structural Materials Handbook is an expandable, hard copy handbook that contains complete sets of data and information for selected portland cement concrete, metallic reinforcement, prestressing tendon, and structural steel materials. The Structural Materials Electronic Database is accessible by an IBM-compatible personal computer and provides an efficient means for searching the various database files to locate materials with similar properties. The database formats have been developed to accommodate data and information on the time-variation of concrete and other structural material properties. To date, the database includes information on concrete, reinforcement, prestressing, and structural steel materials

Inorganic Photovoltaics Materials and Devices: Past, Present, and Future

Science.gov (United States)

Hepp, Aloysius F.; Bailey, Sheila G.; Rafaelle, Ryne P.

2005-01-01

This report describes recent aspects of advanced inorganic materials for photovoltaics or solar cell applications. Specific materials examined will be high-efficiency silicon, gallium arsenide and related materials, and thin-film materials, particularly amorphous silicon and (polycrystalline) copper indium selenide. Some of the advanced concepts discussed include multi-junction III-V (and thin-film) devices, utilization of nanotechnology, specifically quantum dots, low-temperature chemical processing, polymer substrates for lightweight and low-cost solar arrays, concentrator cells, and integrated power devices. While many of these technologies will eventually be used for utility and consumer applications, their genesis can be traced back to challenging problems related to power generation for aerospace and defense. Because this overview of inorganic materials is included in a monogram focused on organic photovoltaics, fundamental issues and metrics common to all solar cell devices (and arrays) will be addressed.

Key technological issues in LMFBR high-temperature structural design - the US perspective

International Nuclear Information System (INIS)

Corum, J.M.

1984-01-01

The purpose of this paper is: (1) to review the key technological issues in LMFBR high-temperature structural design, particularly as they relate to cost reduction; and (2) to provide an overview of activities sponsored by the US Department of Energy to resolve the issues and to establish stable, standardized, and defensible structural design methods and criteria. Specific areas of discussion include: weldments, structural validation tests, simplified design analysis procedures, design procedures for piping, validation of the methodology for notch-like geometries, improved life assessment procedures, thermal striping, extension of the methodology to new materials, and ASME high-temperature Code reform needs. The perceived problems and needs in each area are discussed, and the current status of related US activities is given

Experience of the Russian Federation in the field of the nuclear material control

International Nuclear Information System (INIS)

1998-01-01

The paper deals with the develop met of new approaches concerning safeguards for specific nuclear materials, specific facilities which used Russian technology and design and situation of storing the nuclear materials. The role od IAEA safeguards is emphasised in view of verification and inspection of all the related issues