related applications final: Topics by WorldWideScience.org

Sample records for related applications final

Commercial-grade motors in safety-related applications: Final report

International Nuclear Information System (INIS)

Holzman, P.M.

1988-04-01

The objective of this project was to discuss the process necessary to utilize commercial grade equipment in safety related applications and to provide utilities with guidance for accepting commercial grade motors for safety-related applications. The generic commercial-grade concepts presented in this report can be successfully applied to motors. Commercial grade item utilization has the greatest applicability to motors in ''mild'' environments, because these motors are essentially similar to commercial grade motors in materials, construction methods, and capabilities. The acceptance process is less applicable to motors that are subject to ''harsh'' environments during postulated accidents, because of the unique design features and testing required to qualify these motors
15 CFR 301.7 - Final disposition of an application.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Final disposition of an application. 301.7 Section 301.7 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE MISCELLANEOUS REGULATIONS INSTRUMENTS...
Space tug applications. Final report

International Nuclear Information System (INIS)

1996-01-01

This article is the final report of the conceptual design efforts for a 'space tug'. It includes preliminary efforts, mission analysis, configuration analysis, impact analysis, and conclusions. Of the several concepts evaluated, the nuclear bimodal tug was one of the top candidates, with the two options being the NEBA-1 and NEBA-3 systems. Several potential tug benefits were identified during the mission analysis. The tug enables delivery of large (>3,500 kg) payloads to the outer planets and it increases the GSO delivery capability by 20% relative to current systems. By providing end of life disposal, the tug can be used to extend the life of existing space assets. It can also be used to reboost satellites which were not delivered to their final orbit by the launch system. A specific mission model is the key to validating the tug concept. Once a mission model can be established, mission analysis can be used to determine more precise propellant quantities and burn times. In addition, the specific payloads can be evaluated for mass and volume capability with the launch systems. Results of the economic analysis will be dependent on the total years of operations and the number of missions in the mission model. The mission applications evaluated during this phase drove the need for large propellant quantities and thus did not allow the payloads to step down to smaller and less expensive launch systems
Health related smartphone applications: a literature review

Directory of Open Access Journals (Sweden)

Pantelis Stergiannis

2015-09-01

Full Text Available The rapid evolution of technology, has offered access to a variety of applications and technologies to healthcare professionals. New operating systems developed in the field of mobile devices revolutionized the way in which they are used. One of the main features offered by advanced software of a smartphone is the user’s access to a wealth of new, impressive applications across several operating systems for smartphones. The health related applications provided through smartphones, promote more active involvement of patients and healthcare professionals to provided care and are a new tool for improving health. The purpose of this abstract paper or article was to refer to applications currently used in the health sector, indicating specific capabilities they offer through review of electronic literature, focusing on scientific articles published in databases (PubMed, Scopus, etc. referring to the potentials they offer. It seems that several health related applications have been developed, that can be classified into two main categories. One category comprises applications that are informative, i.e. provide information to the user about health issues, allowing a person to read, gather resources to make decisions, but also to introduce its own data. These applications are mostly used by health care professionals. The second major category of applications refers to those related to help with the diagnosis, treatment and decision-making on various health related issues and in some cases take the form of consultancy, substituting the health care professional. As technology advances, the development of new health related applications is expected, specialized, with new features. Finally, the use of such applications by health care professionals is essential.
SKB's safety case for a final repository license application

International Nuclear Information System (INIS)

Hedin, Allan; Andersson, Johan

2014-01-01

The safety assessment SR-Site is a main component in SKB's license application, submitted in March 2011, to construct and operate a final repository for spent nuclear fuel at Forsmark in the municipality of Oesthammar, Sweden. Its role in the application is to demonstrate long-term safety for a repository at Forsmark. The assessment relates to the KBS-3 disposal concept in which copper canisters with a cast iron insert containing spent nuclear fuel are surrounded by bentonite clay and deposited at approximately 500 m depth in saturated, granitic rock. The principal regulatory acceptance criterion, issued by the Swedish Radiation Safety Authority (SSM), requires that the annual risk of harmful effects after closure not exceed 10 -6 for a representative individual in the group exposed to the greatest risk. SSM's regulations also imply that the assessment time for a repository of this type is one million years after closure. The licence applied for is one in a stepwise series of permits, each requiring a safety report. The next step concerns a permit to start excavation of the repository and requires a preliminary safety assessment report (PSAR) covering both operational and post-closure safety. Later steps include permission to commence trial operation, to commence regular operation and to close the final repository. (authors)
Supplements and other changes to an approved application. Final rule.

Science.gov (United States)

2004-04-08

The Food and Drug Administration (FDA) is amending its regulations on supplements and other changes to an approved application to implement the manufacturing changes provision of the Food and Drug Administration Modernization Act of 1997 (the Modernization Act). The final rule requires manufacturers to assess the effects of manufacturing changes on the identity, strength, quality, purity, and potency of a drug or biological product as those factors relate to the safety or effectiveness of the product. The final rule sets forth requirements for changes requiring supplement submission and approval before the distribution of the product made using the change, changes requiring supplement submission at least 30 days prior to the distribution of the product, changes requiring supplement submission at the time of distribution, and changes to be described in an annual report.
Medicaid program; health care-related taxes. Final rule.

Science.gov (United States)

2009-06-30

This rule finalizes our proposal to delay enforcement of certain clarifications regarding standards for determining hold harmless arrangements in the final rule entitled, "Medicaid Program; Health Care-Related Taxes" from the expiration of a Congressional moratorium on enforcement from July 1, 2009 to June 30, 2010.
Complex Hollow Nanostructures: Synthesis and Energy-Related Applications.

Science.gov (United States)

Yu, Le; Hu, Han; Wu, Hao Bin; Lou, Xiong Wen David

2017-04-01

Hollow nanostructures offer promising potential for advanced energy storage and conversion applications. In the past decade, considerable research efforts have been devoted to the design and synthesis of hollow nanostructures with high complexity by manipulating their geometric morphology, chemical composition, and building block and interior architecture to boost their electrochemical performance, fulfilling the increasing global demand for renewable and sustainable energy sources. In this Review, we present a comprehensive overview of the synthesis and energy-related applications of complex hollow nanostructures. After a brief classification, the design and synthesis of complex hollow nanostructures are described in detail, which include hierarchical hollow spheres, hierarchical tubular structures, hollow polyhedra, and multi-shelled hollow structures, as well as their hybrids with nanocarbon materials. Thereafter, we discuss their niche applications as electrode materials for lithium-ion batteries and hybrid supercapacitors, sulfur hosts for lithium-sulfur batteries, and electrocatalysts for oxygen- and hydrogen-involving energy conversion reactions. The potential superiorities of complex hollow nanostructures for these applications are particularly highlighted. Finally, we conclude this Review with urgent challenges and further research directions of complex hollow nanostructures for energy-related applications. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

Science.gov (United States)

2010-01-01

...; technical information in final safety analysis report. The application must contain a final safety analysis... 10 Energy 2 2010-01-01 2010-01-01 false Contents of applications; technical information in final safety analysis report. 52.157 Section 52.157 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES...
10 CFR 52.79 - Contents of applications; technical information in final safety analysis report.

Science.gov (United States)

2010-01-01

...; technical information in final safety analysis report. (a) The application must contain a final safety... 10 Energy 2 2010-01-01 2010-01-01 false Contents of applications; technical information in final safety analysis report. 52.79 Section 52.79 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES...
Claims Procedure for Plans Providing Disability Benefits; 90-Day Delay of Applicability Date. Final rule; delay of applicability

Science.gov (United States)

2017-11-29

This document delays for ninety (90) days--through April 1, 2018--the applicability of a final rule amending the claims procedure requirements applicable to ERISA-covered employee benefit plans that provide disability benefits (Final Rule). The Final Rule was published in the Federal Register on December 19, 2016, became effective on January 18, 2017, and was scheduled to become applicable on January 1, 2018. The delay announced in this document is necessary to enable the Department of Labor to carefully consider comments and data as part of its effort, pursuant to Executive Order 13777, to examine regulatory alternatives that meet its objectives of ensuring the full and fair review of disability benefit claims while not imposing unnecessary costs and adverse consequences.
Generic requirements specification for qualifying a commercially available PLC for safety-related applications in nuclear power plants. Final report

International Nuclear Information System (INIS)

Ostenso, A.; May, R.

1996-12-01

This is a specification for qualifying a commercially available PLC for application to safety systems in nuclear power plants. The specifications are suitable for evaluating a particular PLC product line as a platform for safety-related applications, establishing a suitable qualification test program, and confirming that the manufacturer has a quality assurance program that is adequate for safety-related applications or is sufficiently complete that, with a reasonable set of compensatory actions, it can be brought into conformance. The specification includes requirements for: (1) quality assurance measures applied to the qualification activities, (2) documentation to support the qualification, and (3) documentation to provide the information needed for applying the qualified PLC platform to a specific application. The specifications are designed to encompass a broad range of safety applications; however, qualifying a particular platform for a different range of applications can be accomplished by appropriate adjustments to the requirements
General relativity with applications to astrophysics

CERN Document Server

Straumann, Norbert

2004-01-01

This text provides a comprehensive and timely introduction to general relativity The foundations of the theory in Part I are thoroughly developed together with the required mathematical background from differential geometry in Part III The six chapters in Part II are devoted to tests of general relativity and to many of its applications Binary pulsars are studied in considerable detail Much space is devoted to the study of compact objects, especially to black holes This includes a detailed derivation of the Kerr solution, Israel's proof of his uniqueness theorem, and derivations of the basic laws of black hole physics The final chapter of this part contains Witten's proof of the positive energy theorem The book addresses undergraduate and graduate students in physics, astrophysics and mathematics It is very well structured and should become a standard text for a modern treatment of gravitational physics The clear presentation of differential geometry makes it also useful for string theory and other fields of ...
Progress in 3D Printing of Carbon Materials for Energy-Related Applications.

Science.gov (United States)

Fu, Kun; Yao, Yonggang; Dai, Jiaqi; Hu, Liangbing

2017-03-01

The additive-manufacturing (AM) technique, known as three-dimensional (3D) printing, has attracted much attention in industry and academia in recent years. 3D printing has been developed for a variety of applications. Printable inks are the most important component for 3D printing, and are related to the materials, the printing method, and the structures of the final 3D-printed products. Carbon materials, due to their good chemical stability and versatile nanostructure, have been widely used in 3D printing for different applications. Good inks are mainly based on volatile solutions having carbon materials as fillers such as graphene oxide (GO), carbon nanotubes (CNT), carbon blacks, and solvent, as well as polymers and other additives. Studies of carbon materials in 3D printing, especially GO-based materials, have been extensively reported for energy-related applications. In these circumstances, understanding the very recent developments of 3D-printed carbon materials and their extended applications to address energy-related challenges and bring new concepts for material designs are becoming urgent and important. Here, recent developments in 3D printing of emerging devices for energy-related applications are reviewed, including energy-storage applications, electronic circuits, and thermal-energy applications at high temperature. To close, a conclusion and outlook are provided, pointing out future designs and developments of 3D-printing technology based on carbon materials for energy-related applications and beyond. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
The Unequal Power Relation in the Final Interpretation

DEFF Research Database (Denmark)

Almlund, Pernille

2013-01-01

if the interpretation also takes the unequal power relation into account. Consequently, interpreting the researched in a respectful manner is difficult. This article demonstrates the necessity of increasing awareness of the unequal power relation by posing, discussing and, to some extent answering, three methodological...... questions inspired by meta-theory that are significant for qualitative research and qualitative researchers to reflect on. This article concludes that respectful interpretation and consciously paying attention to the unequal power relation in the final interpretation require decentring the subject...
Final report: Compiled MPI. Cost-Effective Exascale Application Development

Energy Technology Data Exchange (ETDEWEB)

Gropp, William Douglas [Univ. of Illinois, Urbana-Champaign, IL (United States)

2015-12-21

This is the final report on Compiled MPI: Cost-Effective Exascale Application Development, and summarizes the results under this project. The project investigated runtime enviroments that improve the performance of MPI (Message-Passing Interface) programs; work at Illinois in the last period of this project looked at optimizing data access optimizations expressed with MPI datatypes.
Rayleigh reciprocity relations: Applications

International Nuclear Information System (INIS)

Lin Ju; Li Xiao-Lei; Wang Ning

2016-01-01

Classical reciprocity relations have wide applications in acoustics, from field representation to generalized optical theorem. In this paper we introduce our recent results on the applications and generalization of classical Rayleigh reciprocity relation: higher derivative reciprocity relations as a generalization of the classical one and a theoretical proof on the Green’s function retrieval from volume noises. (special topic)
Application distribution model and related security attacks in VANET

Science.gov (United States)

Nikaein, Navid; Kanti Datta, Soumya; Marecar, Irshad; Bonnet, Christian

2013-03-01

In this paper, we present a model for application distribution and related security attacks in dense vehicular ad hoc networks (VANET) and sparse VANET which forms a delay tolerant network (DTN). We study the vulnerabilities of VANET to evaluate the attack scenarios and introduce a new attacker`s model as an extension to the work done in [6]. Then a VANET model has been proposed that supports the application distribution through proxy app stores on top of mobile platforms installed in vehicles. The steps of application distribution have been studied in detail. We have identified key attacks (e.g. malware, spamming and phishing, software attack and threat to location privacy) for dense VANET and two attack scenarios for sparse VANET. It has been shown that attacks can be launched by distributing malicious applications and injecting malicious codes to On Board Unit (OBU) by exploiting OBU software security holes. Consequences of such security attacks have been described. Finally, countermeasures including the concepts of sandbox have also been presented in depth.
Lithium-polymer batteries for EV applications. Final report

Energy Technology Data Exchange (ETDEWEB)

Thomas, J.O. [Uppsala Univ. (Sweden). Dept. of Inorganic Chemistry

2000-05-01

The project initially held a strong 'battery materials' profile, but has moved in its final year into more 'battery engineering' aspects; the performances of a range of potential materials have been screened, and candidates have emerged. It is noteworthy that these same materials have also now become 'best-choice' materials in commercial Japanese Li-ion batteries for mobile-phone, lap-top and, more recently, even electric-vehicle (EV) applications. It is now clear that the Li-ion (polymer) battery offers a genuinely viable option in electric and electric-hybrid vehicle concepts. Specifically, our work has involved synthetic, structural, morphological and electrochemical studies of lithium insertion mechanisms in TMO-based cathodes (LiMn{sub 2}O{sub 4}, V{sub 6}O{sub 13}, LiCoO{sub 2}, LiFePO{sub 4}, etc) and graphitic carbon anodes. Performance has been optimised from cell capacity, power, shelf-life and safety viewpoints. Cost has also emerged as a critical variable. Novel methods have been developed within the project for elevated-temperature battery studies (up to 80 deg C); they have become widely applied internationally. The electrode materials which have been developed have subsequently been incorporated into laboratory-scale lithium-ion battery prototypes, whose performance has then been evaluated. The final phase of the project has focussed on a new cathode material (LiFePO{sub 4}) not in current commercial use and yet ideally suited to EV application by virtue of its cheapness, high capacity (ca 170 mAh/g), high voltage vs. Li (3.5V), and extremely flat discharge curve. This could well prove to be the 'best compromise' Li-ion battery cathode for EV applications in the future.
Neutrosophic Parameterized Soft Relations and Their Applications

Directory of Open Access Journals (Sweden)

Irfan Deli

2014-06-01

Full Text Available The aim of this paper is to introduce the concept of relation on neutrosophic parameterized soft set (NP- soft sets theory. We have studied some related properties and also put forward some propositions on neutrosophic parameterized soft relation with proofs and examples. Finally the notions of symmetric, transitive, reflexive, and equivalence neutrosophic parameterized soft set relations have been established in our work. Finally a decision making method on NP-soft sets is presented.

Application opportunities in wireless communications. Final report

International Nuclear Information System (INIS)

Abbott, R.E.; Blevins, R.P.; Olmstead, C.

1998-07-01

This report presents the results of examinations of wireless technologies and applications that may offer potential to utilities. Five different wireless technology areas are reviewed. Three areas--Communication Networks, Monitored Security Services, and Home Automation--potentially represent new business ventures for utilities. Two areas--Automatic Vehicle Location and Automated Field-Force Management--represent wireless applications with potential for reduced operating costs and improved customer relations
The stabilisation of final focus system

Indian Academy of Sciences (India)

The StaFF (stabilisation of final focus) system will use interferometers to monitor the relative ... quadrupole magnets will be the most demanding application, where mutual and beam- ... interferometers to measure lines of a geodetic network to record relative motion between two beam ... coupled interferometer design.
Application and Network-Cognizant Proxies - Final Report

Energy Technology Data Exchange (ETDEWEB)

Antonio Ortega; Daniel C. Lee

2003-03-24

OAK B264 Application and Network-Cognizant Proxies - Final Report. Current networks show increasing heterogeneity both in terms of their bandwidths/delays and the applications they are required to support. This is a trend that is likely to intensify in the future, as real-time services, such as video, become more widely available and networking access over wireless links becomes more widespread. For this reason they propose that application-specific proxies, intermediate network nodes that broker the interactions between server and client, will become an increasingly important network element. These proxies will allow adaptation to changes in network characteristics without requiring a direct intervention of either server or client. Moreover, it will be possible to locate these proxies strategically at those points where a mismatch occurs between subdomains (for example, a proxy could be placed so as to act as a bridge between a reliable network domain and an unreliable one). This design philosophy favors scalability in the sense that the basic network infrastructure can remain unchanged while new functionality can be added to proxies, as required by the applications. While proxies can perform numerous generic functions, such as caching or security, they concentrate here on media-specific, and in particular video-specific, tasks. The goal of this project was to demonstrate that application- and network-specific knowledge at a proxy can improve overall performance especially under changing network conditions. They summarize below the work performed to address these issues. Particular effort was spent in studying caching techniques and on video classification to enable DiffServ delivery. other work included analysis of traffic characteristics, optimized media scheduling, coding techniques based on multiple description coding, and use of proxies to reduce computation costs. This work covered much of what was originally proposed but with a necessarily reduced scope.
ALAM/CLAM and some applications of computer algebra systems to problems in general relativity

International Nuclear Information System (INIS)

Russell-Clark, R.A.

1973-01-01

This paper is divided into three parts. Part A presents a historical survey of the development of the system, a brief description of its features and, finally, a critical assessment. ALAM and CLAM have been used in many problems in General Relativity; the vast majority of these belong to a set of standard calculations termed ''metric applications''. However, four large non-standard applications have been attempted successfully and these are described in Part B. CAMAL is the only other system which has been used extensively for work in relativity. CAMAL has played an important role in two research projects and details of these are given in Part C
A final size relation for epidemic models of vector-transmitted diseases

OpenAIRE

Fred Brauer

2017-01-01

We formulate and analyze an age of infection model for epidemics of diseases transmitted by a vector, including the possibility of direct transmission as well. We show how to determine a basic reproduction number. While there is no explicit final size relation as for diseases transmitted directly, we are able to obtain estimates for the final size of the epidemic.
Stationary battery guide: Design, application, and maintenance. Final report

International Nuclear Information System (INIS)

1997-11-01

This guide has been prepared to assist a variety of users with stationary battery design, application, and maintenance. The following battery-related topics are discussed in detail: (1) fundamentals--how batteries are designed and how they work; (2) aging, degradation, and failures with an emphasis on how various maintenance tasks can prevent, detect, or repair certain degradation mechanisms; (3) applications--how batteries are designed for a specific purpose and how the battery industry has evolved; (4) sizing for different applications; (5) protection and charging; (6) periodic inspections and checks; (7) capacity discharge testing; (8) installation and replacement considerations; and (9) problems that can occur with battery systems. Since the original guide was published, new IEEE Recommended Practices related to stationary battery applications have been issued. This revision addresses those industry changes as well as some of the emerging issues related to the development of other industry documents. This guide has been prepared as a comprehensive reference source for stationary batteries and is intended to address the design, application, and maintenance needs of users. The technical discussions are at the application level. Fundamentals of battery design are covered in greater detail in this revision. More details related to internal cell materials, their operational relationship, and performance over the expected life of the battery cell are provided. This information has been included because many changes in battery cell materials, manufacturing and design processes are not always communicated to the user
Technical support document for land application of sewage sludge. Volume 1. Final report

International Nuclear Information System (INIS)

Jones, A.; Beyer, L.; Rookwood, M.; Pacenka, J.; Bergin, J.

1992-11-01

The document provides the technical background and justification for the U.S. Environmental Protection Agency's (EPA) final regulation (40 CFR Part 503) covering the land application of sewage sludge. The document summarizes current practices in land application and presents data supporting the risk assessment methodology used to derive human health and environmental risk-based limits for contaminants in land applied sewage sludge. The management practices associated with land application are outlined and the different pathways by which contaminants reach highly-exposed individuals (HEIs) through land application are discussed
BASINs and WEPP Climate Assessment Tools (CAT): Case Study Guide to Potential Applications (Final Report)

Science.gov (United States)

EPA announced the release of the final report, BASINs and WEPP Climate Assessment Tools (CAT): Case Study Guide to Potential Applications. This report supports application of two recently developed water modeling tools, the Better Assessment Science Integrating point & ...
Applications for approval to market a new drug; complete response letter; amendments to unapproved applications. Final rule.

Science.gov (United States)

2008-07-10

The Food and Drug Administration (FDA) is amending its regulations on new drug applications (NDAs) and abbreviated new drug applications (ANDAs) for approval to market new drugs and generic drugs (drugs for which approval is sought in an ANDA). The final rule discontinues FDA's use of approvable letters and not approvable letters when taking action on marketing applications. Instead, we will send applicants a complete response letter to indicate that the review cycle for an application is complete and that the application is not ready for approval. We are also revising the regulations on extending the review cycle due to the submission of an amendment to an unapproved application and starting a new review cycle after the resubmission of an application following receipt of a complete response letter. In addition, we are adding to the regulations on biologics license applications (BLAs) provisions on the issuance of complete response letters to BLA applicants. We are taking these actions to implement the user fee performance goals referenced in the Prescription Drug User Fee Amendments of 2002 (PDUFA III) that address procedures and establish target timeframes for reviewing human drug applications.
Space Processing Applications rocket project SPAR III. Final report

International Nuclear Information System (INIS)

Reeves, F.

1978-01-01

This document presents the engineering report and science payload III test report and summarizes the experiment objectives, design/operational concepts, and final results of each of five scientific experiments conducted during the third Space Processing Applications Rocket (SPAR) flight flown by NASA in December 1976. The five individual SPAR experiments, covering a wide and varied range of scientific materials processing objectives, were entitled: Liquid Mixing, Interaction of Bubbles with Solidification Interfaces, Epitaxial Growth of Single Crystal Film, Containerless Processing of Beryllium, and Contact and Coalescence of Viscous Bodies
Final Report. Center for Scalable Application Development Software

Energy Technology Data Exchange (ETDEWEB)

Mellor-Crummey, John [Rice Univ., Houston, TX (United States)

2014-10-26

The Center for Scalable Application Development Software (CScADS) was established as a part- nership between Rice University, Argonne National Laboratory, University of California Berkeley, University of Tennessee – Knoxville, and University of Wisconsin – Madison. CScADS pursued an integrated set of activities with the aim of increasing the productivity of DOE computational scientists by catalyzing the development of systems software, libraries, compilers, and tools for leadership computing platforms. Principal Center activities were workshops to engage the research community in the challenges of leadership computing, research and development of open-source software, and work with computational scientists to help them develop codes for leadership computing platforms. This final report summarizes CScADS activities at Rice University in these areas.
RELATIONS BETWEEN BIG FIVE PERSONALITIES, MOTIVATION TO FAKE, AND APPLICANT FAKING BEHAVIOR

Directory of Open Access Journals (Sweden)

Aldo Prasmara

2017-09-01

Full Text Available The action of faking is often done by applicants in the process of recruitment and selection of new employees with the purpose to impress an employer. The aim of this study is to integrate the big five personalities, faking motivation, and faking behavior. That is, the personality dimensions of applicants based may be the source of faking motivation, in turn, faking behavior. The data were gathered by questionnaires done toward 200 applicants. Data analysis was conducted using a Structural Equation Modelling (SEM in the AMOS 22. Results showed that in the five major categories of personalities, there was a dimension that was not significantly related to motivation to fake, i.e., neuroticism, while openness and extraversion positively influenced motivation to fake. The other dimensions, conscientiousness and agreeableness, showed negative effects on motivation to fake. Finally, motivation to fake showed a positive effect on applicants’ faking behavior.
The testing effect for mediator final test cues and related final test cues in online and laboratory experiments.

Science.gov (United States)

Coppens, Leonora C; Verkoeijen, Peter P J L; Bouwmeester, Samantha; Rikers, Remy M J P

2016-05-31

The testing effect is the finding that information that is retrieved during learning is more often correctly retrieved on a final test than information that is restudied. According to the semantic mediator hypothesis the testing effect arises because retrieval practice of cue-target pairs (mother-child) activates semantically related mediators (father) more than restudying. Hence, the mediator-target (father-child) association should be stronger for retrieved than restudied pairs. Indeed, Carpenter (2011) found a larger testing effect when participants received mediators (father) than when they received target-related words (birth) as final test cues. The present study started as an attempt to test an alternative account of Carpenter's results. However, it turned into a series of conceptual (Experiment 1) and direct (Experiment 2 and 3) replications conducted with online samples. The results of these online replications were compared with those of similar existing laboratory experiments through small-scale meta-analyses. The results showed that (1) the magnitude of the raw mediator testing effect advantage is comparable for online and laboratory experiments, (2) in both online and laboratory experiments the magnitude of the raw mediator testing effect advantage is smaller than in Carpenter's original experiment, and (3) the testing effect for related cues varies considerably between online experiments. The variability in the testing effect for related cues in online experiments could point toward moderators of the related cue short-term testing effect. The raw mediator testing effect advantage is smaller than in Carpenter's original experiment.
Space Processing Applications Rocket project, SPAR 1. Final report

International Nuclear Information System (INIS)

Reeves, F.; Chassay, R.

1976-12-01

The experiment objectives, design/operational concepts, and final results of each of nine scientific experiments conducted during the first Space Processing Applications Rocket (SPAR) flight are summarized. The nine individual SPAR experiments, covering a wide and varied range of scientific materials processing objectives, were entitled: solidification of Pb-Sb eutectic, feasibility of producing closed-cell metal foams, characterization of rocket vibration environment by measurement of mixing of two liquids, uniform dispersions of crystallization processing, direct observation of solidification as a function of gravity levels, casting thoria dispersion-strengthened interfaces, contained polycrystalline solidification, and preparation of a special alloy for manufacturing of magnetic hard superconductor under zero-g environment
Augmented reality. Fundamentals and nuclear related applications

International Nuclear Information System (INIS)

Ishii, Hirotake

2010-01-01

In recent years, Augmented Reality (AR) has attracted considerable interest from both academia and industry. Virtual Reality enables users to interact only with virtual objects in a virtual environment, but AR enables users to interact with both virtual objects and real objects in the real world. This feature supports application of AR to various fields such as education, driving, entertainment, and navigation. Especially, by application of AR to support workers in nuclear power plants, it is expected that working time and human error can be decreased. However, many problems remain unsolved to apply AR to real fields. In this lecture note, fundamental knowledge of AR is presented first including the overview of elemental technologies to realize AR. Then various AR applications to nuclear fields are described. Finally, future prospects are given. (author)
76 FR 57646 - Final Withdrawal of Certain Federal Aquatic Life Water Quality Criteria Applicable to Wisconsin

Science.gov (United States)

2011-09-16

... Final Withdrawal of Certain Federal Aquatic Life Water Quality Criteria Applicable to Wisconsin AGENCY... aquatic life water quality criteria applicable to Wisconsin? C. Why is the EPA not withdrawing Wisconsin's chronic endrin aquatic life use criterion for waters designated as Warm Water Sportfish and Warm Water...
APPRAISAL OF FINAL TAILINGS APPLICABILITY FOR PROCESSING AND PRODUCTION OF MODIFIERS OF IRON-CARBON ALLOYS

Directory of Open Access Journals (Sweden)

A. S. Panasugin

2011-01-01

Full Text Available The methodology of rating of the galvanic final tailings applicability for further processing in the interests of needs of metallurgical production of the Republic Belarus is offered.
Research Applications for Teaching (RAFT) Project. Final Report.

Science.gov (United States)

Thomson, James R., Jr.; Handley, Herbert M.

A report is given of the development and progress of the Research Applications for Teaching (RAFT) project, developed at Mississippi State University. Based upon research findings relative to effective teaching and effective schooling, five curriculum modules were prepared and implemented in instruction. In the second year of the project the…
Fuzzy relational calculus theory, applications and software

CERN Document Server

Peeva, Ketty

2004-01-01

This book examines fuzzy relational calculus theory with applications in various engineering subjects. The scope of the text covers unified and exact methods with algorithms for direct and inverse problem resolution in fuzzy relational calculus. Extensive engineering applications of fuzzy relation compositions and fuzzy linear systems (linear, relational and intuitionistic) are discussed. Some examples of such applications include solutions of equivalence, reduction and minimization problems in fuzzy machines, pattern recognition in fuzzy languages, optimization and inference engines in textile and chemical engineering, etc. A comprehensive overview of the authors' original work in fuzzy relational calculus is also provided in each chapter. The attached CD-Rom contains a toolbox with many functions for fuzzy calculations, together with an original algorithm for inverse problem resolution in MATLAB. This book is also suitable for use as a textbook in related courses at advanced undergraduate and graduate level...
Impact of Monoenergetic Photon Sources on Nonproliferation Applications Final Report

Energy Technology Data Exchange (ETDEWEB)

Geddes, Cameron [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ludewigt, Bernhard [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Valentine, John [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Quiter, Brian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Descalle, Marie-Anne [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Warren, Glen [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kinlaw, Matt [Idaho National Lab. (INL), Idaho Falls, ID (United States); Thompson, Scott [Idaho National Lab. (INL), Idaho Falls, ID (United States); Chichester, David [Idaho National Lab. (INL), Idaho Falls, ID (United States); Miller, Cameron [Univ. of Michigan, Ann Arbor, MI (United States); Pozzi, Sara [Univ. of Michigan, Ann Arbor, MI (United States)

2017-03-01

Near-monoenergetic photon sources (MPSs) have the potential to improve sensitivity at greatly reduced dose in existing applications and enable new capabilities in other applications, particularly where passive signatures do not penetrate or are insufficiently accurate. MPS advantages include the ability to select energy, energy spread, flux, and pulse structures to deliver only the photons needed for the application, while suppressing extraneous dose and background. Some MPSs also offer narrow angular divergence photon beams which can target dose and/or mitigate scattering contributions to image contrast degradation. Current bremsstrahlung photon sources (e.g., linacs and betatrons) produce photons over a broad range of energies, thus delivering unnecessary dose that in some cases also interferes with the signature to be detected and/or restricts operations. Current sources must be collimated (reducing flux) to generate narrow divergence beams. While MPSs can in principle resolve these issues, they remain at relatively low TRL status. Candidate MPS technologies for nonproliferation applications are now being developed, each of which has different properties (e.g. broad vs. narrow angular divergence). Within each technology, source parameters trade off against one another (e.g. flux vs. energy spread), representing a large operation space. This report describes a broad survey of potential applications, identification of high priority applications, and detailed simulations addressing those priority applications. Requirements were derived for each application, and analysis and simulations were conducted to define MPS parameters that deliver benefit. The results can inform targeting of MPS development to deliver strong impact relative to current systems.

77 FR 50153 - Special Purpose Permit Application; Hawaii-Based Shallow-Set Longline Fishery; Final...

Science.gov (United States)

2012-08-20

...-FF01M01000] Special Purpose Permit Application; Hawaii-Based Shallow-Set Longline Fishery; Final... of the Hawaii-based shallow-set longline fishery, which targets swordfish. After evaluating several... take of seabirds in the shallow-set longline fishery based in Hawaii. The analysis of alternatives is...
75 FR 43329 - Interim Final Rules for Group Health Plans and Health Insurance Issuers Relating to Internal...

Science.gov (United States)

2010-07-23

... 45 CFR Part 147 Interim Final Rules for Group Health Plans and Health Insurance Issuers Relating to... Interim Final Rules for Group Health Plans and Health Insurance Issuers Relating to Internal Claims and... of Labor; Office of Consumer Information and Insurance Oversight, Department of Health and Human...
SPEAR-FCODE-GAMMA functional specifications. Final report

International Nuclear Information System (INIS)

Fiero, I.B.

1983-03-01

SPEAR FCODE GAMMA (SFG), a conceptual fuel-performance code for use in licensing analyses, has been defined and characterized as a set of functional specifications. The potential licensing-related applications of SFG are established and discussed. General code specifications including regulatory, interface, hardware application, code model and software, and operational specifications are discussed. The code input and output information including data requirements as well as formatting aspects are detailed. Finally, the SFG code-accuracy guidelines are established and the validation process is described
Nanostructured Conjugated Polymers for Energy-Related Applications beyond Solar Cells.

Science.gov (United States)

Xie, Jian; Zhao, Cui-E; Lin, Zong-Qiong; Gu, Pei-Yang; Zhang, Qichun

2016-05-20

To meet the ever-increasing requirements for the next generation of sustainable and versatile energy-related devices, conjugated polymers, which have potential advantages over small molecules and inorganic materials, are among the most promising types of green candidates. The properties of conjugated polymers can be tuned through modification of the structure and incorporation of different functional moieties. In addition, superior performances can be achieved as a result of the advantages of nanostructures, such as their large surface areas and the shortened pathways for charge transfer. Therefore, nanostructured conjugated polymers with different properties can be obtained to be applied in different energy-related organic devices. This review focuses on the application and performance of the recently reported nanostructured conjugated polymers for high-performance devices, including rechargeable lithium batteries, microbial fuel cells (MFCs), thermoelectric generators, and photocatalytic systems. The design strategies, reaction mechanisms, advantages, and limitations of nanostructured conjugated polymers are further discussed in each section. Finally, possible routes to improve the performances of the current systems are also included in the conclusion. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Application of Vectors to Relative Velocity

Science.gov (United States)

Tin-Lam, Toh

2004-01-01

The topic 'relative velocity' has recently been introduced into the Cambridge Ordinary Level Additional Mathematics syllabus under the application of Vectors. In this note, the results of relative velocity and the 'reduction to rest' technique of teaching relative velocity are derived mathematically from vector algebra, in the hope of providing…
Applications of biomechanics for prevention of work-related musculoskeletal disorders.

Science.gov (United States)

Garg, Arun; Kapellusch, Jay M

2009-01-01

This paper summarises applications of biomechanical principles and models in industry to control musculoskeletal disorders of the low back and upper extremity. Applications of 2-D and 3-D biomechanical models to estimate compressive force on the low back, the strength requirements of jobs, application of guidelines for overhead work and application of strain index and threshold limit value to address distal upper extremity musculoskeletal disorders are presented. Several case studies applied in the railroad industry, manufacturing, healthcare and warehousing are presented. Finally, future developments needed for improved biomechanical applications in industry are discussed. The information presented will be of value to practising ergonomists to recognise how biomechanics has played a significant role in identifying causes of musculoskeletal disorders and controlling them in the workplace. In particular, the information presented will help practising ergonomists with how physical stresses can be objectively quantified.
An approach to decision-making with triangular fuzzy reciprocal preference relations and its application

Science.gov (United States)

Meng, Fanyong

2018-02-01

Triangular fuzzy reciprocal preference relations (TFRPRs) are powerful tools to denoting decision-makers' fuzzy judgments, which permit the decision-makers to apply triangular fuzzy ratio rather than real numbers to express their judgements. Consistency analysis is one of the most crucial issues in preference relations that can guarantee the reasonable ranking order. However, all previous consistency concepts cannot well address this type of preference relations. Based on the operational laws on triangular fuzzy numbers, this paper introduces an additive consistency concept for TFRPRs by using quasi TFRPRs, which can be seen as a natural extension of the crisp case. Using this consistency concept, models to judging the additive consistency of TFRPRs and to estimating missing values in complete TFRPRs are constructed. Then, an algorithm to decision-making with TFRPRs is developed. Finally, two numerical examples are offered to illustrate the application of the proposed procedure, and comparison analysis is performed.
THE INITIAL-FINAL MASS RELATION AMONG WHITE DWARFS IN WIDE BINARIES

International Nuclear Information System (INIS)

Zhao, J. K.; Oswalt, T. D.; Willson, L. A.; Wang, Q.; Zhao, G.

2012-01-01

We present the initial-final mass relation derived from 10 white dwarfs in wide binaries that consist of a main-sequence star and a white dwarf. The temperature and gravity of each white dwarf were measured by fitting theoretical model atmospheres to the observed spectrum using a χ 2 fitting algorithm. The cooling time and mass were obtained using theoretical cooling tracks. The total age of each binary was estimated from the chromospheric activity of its main-sequence component to an uncertainty of about 0.17 dex in log t. The difference between the total age and white dwarf cooling time is taken as the main-sequence lifetime of each white dwarf. The initial mass of each white dwarf was then determined using stellar evolution tracks with a corresponding metallicity derived from spectra of their main-sequence companions, thus yielding the initial-final mass relation. Most of the initial masses of the white dwarf components are between 1 and 2 M ☉ . Our results suggest a correlation between the metallicity of a white dwarf's progenitor and the amount of post-main-sequence mass loss it experiences—at least among progenitors with masses in the range of 1-2 M ☉ . A comparison of our observations to theoretical models suggests that low-mass stars preferentially lose mass on the red giant branch.
15 CFR Notes Applicable to State... - Notes applicable to State of Understanding related to Medical Equipment:

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Notes applicable to State of Understanding related to Medical Equipment: applicable Notes applicable to State of Understanding related to Medical Equipment: Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY,...
Use of geothermal heat for crop drying and related agricultural applications. Final report

Energy Technology Data Exchange (ETDEWEB)

Gordon, T.J.; Wright, T.C.; Fein, E.; Munson, T.R.; Richmond, R.C.

1978-03-01

Observations led to the selection of the alfalfa dehydration industry for in-depth analysis of the application of moderate-temperature geothermal heat. Six geothermal heat exchanger/dryer configurations were examined. A low-temperature conveyor dryer using geothermal water to supply all required heat was chosen for site-specific analysis, the retrofitting of a large alfalfa dehydration plant within the Heber KGRA in the Imperial Valley, California. Even in the most favorable scenario--sharing a geothermal pipeline with the neighboring fertilizer plant--geothermal retrofitting would increase the price of the alfalfa ''dehy'' about 40 percent. The geothermal brine is estimated to cost $2.58/million Btu's compared with a 1977 natural gas cost of $1.15. Capital cost for heat exchangers and the new dryers is estimated at $3.3 million. The Heber plant appeared to offer the only good opportunity for geothermal retrofitting of an existing alfalfa dehydration plant. Construction of new plants at geothermal resource sites cannot be justified due to the uncertain state of the ''dehy'' industry. Use of geothermal heat for drying other crops may be much more promising. The potato dehydration industry, which is concentrated in the geothermal-rich Snake River Valley of Idaho, appears to offer good potential for geothermal retrofitting; about 4.7 x 10{sup 12}Btu's are used annually by plants within 50 miles of resources. Drying together at the geothermal wellhead several crops that have interlocking processing seasons and drying-temperature requirements may be quite attractive. The best ''multicrop drying center'' site identified was at Power Ranch Wells, Arizona; 34 other sites were defined. Agricultural processing applications other than drying were investigated briefly.
Lead plant application of leak-before-break to high energy piping. Final report, January 1989

International Nuclear Information System (INIS)

1989-01-01

This report presents the experience gained during a successful application of a leak-before-break program by Duquesne Light Company. This program was directed at the high energy nuclear piping at Beaver Valley Power Station - Unit 2. This experience can be applied to other nuclear plant leak-before-break efforts in order to minimize the number of pipe whip restraints, jet impingement shields, snubbers, and to discount the consideration of remaining pipe rupture dynamic effects. The chronology of events leading to Nuclear Regulatory Commission approval of the Beaver Valley Power Station - Unit 2 lead plant effort is described. The final report and pertinent sections of the final Safety Evaluation Report are also included. (author)
Composite magnetic nanoparticles: Synthesis and cancer-related applications

International Nuclear Information System (INIS)

Cai Ping; Chen Hong-Min; Xie Jin

2014-01-01

Recent advances in the preparation and applications of composite magnetic nanoparticles are reviewed and summarized, with a focus on cancer-related applications. (topical review - magnetism, magnetic materials, and interdisciplinary research)
Call for applications_2013_VA_Final

International Development Research Centre (IDRC) Digital Library (Canada)

Lindsay Beck

2013-04-12

Apr 12, 2013 ... graduate level field-‐school, taught by UNBC and CoPEH-‐Canada team members1 . Final ... and most of the sessions in the course will be given in English. ... o demonstrated interest in Ecosystem approaches to health.
Final technical report

DEFF Research Database (Denmark)

Juhl, Thomas Winther; Nielsen, Jakob Skov

gas jet chamber and laser beam path from the final focusing mirror. The project consists of three phases: Phase 1: Fundamental studies of cutting front mechanisms, beam propagation, nozzle design and chemical reactions in the cut kerf with special emphasize on high laser powers and thick sections...... cutting nozzle which can be adjusted independently to the laser beam has been developed. The position of the focus relative the workpiece can be adjusted to cutting applications with relatively large processing windows, i.e. both mild and stainless steels, and of a broad thickness range. A build-in auto......This project entails research with the goal to extend laser cutting of steel based metals to thickness above 20 mm and laser powers in the 10 kW range, with adequate accuracy and economically viable cutting speeds. The technical approach is to develop mirror based cutting heads with truly coaxial...
Creating the final conversations scale: a measure of end-of-life relational communication with terminally ill individuals.

Science.gov (United States)

Generous, Mark Alan; Keeley, Maureen P

2014-01-01

Final conversations (FCs) are defined as the communicative interactions, both verbal and nonverbal, that occur between terminally ill patients and relational partners. In this study, the "Final Conversations Scale" was developed and tested. A total of 152 participants that had engaged in final conversations with individuals that were terminally ill completed the newly developed instrument. Factor analysis produced a five-factor structure, including: messages of spirituality/religion; expressions of love; proactive difficult relationship talk; everyday communication; and talk about illness/death. Participants' perceptions of the relational closeness and difficulty with the deceased significantly influenced the individuals' recalled frequency of FCs messages. Practical and scholarly implications focus on the needs of the family members regarding their communication with terminally ill individuals, as well as directions for future research with the FCs Scale.
Genome Writing: Current Progress and Related Applications

Directory of Open Access Journals (Sweden)

Yueqiang Wang

2018-02-01

Full Text Available The ultimate goal of synthetic biology is to build customized cells or organisms to meet specific industrial or medical needs. The most important part of the customized cell is a synthetic genome. Advanced genomic writing technologies are required to build such an artificial genome. Recently, the partially-completed synthetic yeast genome project represents a milestone in this field. In this mini review, we briefly introduce the techniques for de novo genome synthesis and genome editing. Furthermore, we summarize recent research progresses and highlight several applications in the synthetic genome field. Finally, we discuss current challenges and future prospects. Keywords: Synthetic biology, Genome writing, Genome editing, Bioethics, Biosafety
14 CFR 1214.1105 - Final ranking.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Final ranking. 1214.1105 Section 1214.1105... Recruitment and Selection Program § 1214.1105 Final ranking. Final rankings will be based on a combination of... preference will be included in this final ranking in accordance with applicable regulations. ...
Power system technical performance issues related to the application of long HVAC cables

DEFF Research Database (Denmark)

Wiechowski, on behalf of Cigre WG C4.502, W.; Sluis, L. V. der; Ohno, Teruo

2011-01-01

This paper reports the progress of work of Cigre Working Group C4.502 “Power system technical performance issues related to the application of long HVAC cables”. The primary goal of the WG C4.502 is to write a technical brochure that will serve as practical guide for performing studies necessary...... for assessing the technical performance of HV/EHV systems with large share of AC cable lines. This paper besides providing a background for formulation of WG C4.502 and its overall aim, describes the tasks that were accomplished before the interim report was submitted to Study Committee C4 System Technical...... Performance in August 2010. The work in the WG is ongoing and final report will be ready according to the time schedule in 2012. The focus of this paper is in particular to show all issues related to system technical performance with assigned weights in terms of their importance and/or uniqueness for cable...
Application of personal computers to enhance operation and management of research reactors. Proceedings of a final research co-ordination meeting

International Nuclear Information System (INIS)

1998-02-01

The on-line of personal computers (PCs) can be valuable to guide the research reactor operator in analysing both normal and abnormal situations. PCs can effectively be used for data acquisition and data processing, and providing information to the operator. Typical areas of on-line applications of PCs in nuclear research reactors include: Acquisition and display of data on process parameters; performance evaluation of major equipment and safety related components; fuel management; computation of reactor physics parameters; failed fuel detection and location; inventory of system fluids; training using computer aided simulation; operator advice. All these applications require the development of computer programmes and interface hardware. In recognizing this need, the IAEA initiated in 1990 a Co-ordinated Research Programme (CRP) on ''Application of Personal Computers to Enhance Operation and Management of Research Reactors''. The final meeting of the CRP was held from 30 October to 3 November 1995 in Dalata Viet Nam. This report was written by contributors from Bangladesh, Germany, India, the Republic of Korea, Pakistan, Philippines, Thailand and Viet Nam. The IAEA staff members responsible for the publication were K. Akhtar and V. Dimic of the Physics Section, Division of Physical and Chemical Sciences
Review on recent and advanced applications of monoliths and related porous polymer gels in micro-fluidic devices

International Nuclear Information System (INIS)

Vazquez, Mercedes; Paull, Brett

2010-01-01

This review critically summarises recent novel and advanced achievements in the application of monolithic materials and related porous polymer gels in micro-fluidic devices appearing within the literature over the period of the last 5 years (2005-2010). The range of monolithic materials has developed rapidly over the past decade, with a diverse and highly versatile class of materials now available, with each exhibiting distinct porosities, pore sizes, and a wide variety of surface functionalities. A major advantage of these materials is their ease of preparation in micro-fluidic channels by in situ polymerisation, leading to monolithic materials being increasingly utilised for a larger variety of purposes in micro-fluidic platforms. Applications of porous polymer monoliths, silica-based monoliths and related homogeneous porous polymer gels in the preparation of separation columns, ion-permeable membranes, preconcentrators, extractors, electrospray emitters, micro-valves, electrokinetic pumps, micro-reactors and micro-mixers in micro-fluidic devices are discussed herein. Procedures used in the preparation of monolithic materials in micro-channels, as well as some practical aspects of the micro-fluidic chip fabrication are addressed. Recent analytical/bioanalytical and catalytic applications of the final micro-fluidic devices incorporating monolithic materials are also reviewed.

77 FR 11157 - Certain Portable Electronic Devices and Related Software; Final Determination Finding No...

Science.gov (United States)

2012-02-24

... investigation). The complaint named Apple Inc. as the Respondent. On October 17, 2011, the ALJ issued his final... Commission has subject matter jurisdiction and that Apple did not contest that the Commission has in rem and... electronic devices and related software. Regarding infringement, the ALJ found that Apple does not infringe...
Final Report. Hydrodynamics by high-energy-density plasma flow and hydrodynamics and radiative hydrodynamics with astrophysical application

International Nuclear Information System (INIS)

R Paul Drake

2004-01-01

OAK-B135 This is the final report from the project Hydrodynamics by High-Energy-Density Plasma Flow and Hydrodynamics and Radiation Hydrodynamics with Astrophysical Applications. This project supported a group at the University of Michigan in the invention, design, performance, and analysis of experiments using high-energy-density research facilities. The experiments explored compressible nonlinear hydrodynamics, in particular at decelerating interfaces, and the radiation hydrodynamics of strong shock waves. It has application to supernovae, astrophysical jets, shock-cloud interactions, and radiative shock waves
The final management of nuclear fuel. Legal and economic aspects; La gestion final del combustible nuclear. Aspectos legales y economicos

Energy Technology Data Exchange (ETDEWEB)

Villota, C. de

2009-07-01

This article gives a brief summary of the characteristics of spent fuel and the lines of action considered for its management. It describes the legal framework that supports the Radioactive Waste Management Plan (PGRR), which contains the lines applicable to Final Spent Fuel Management, as well as the evolution of this legal framework. The article contains the 2008 updated costs of the various items of the PGRR, with a more detailed description of those related to this type of fuel, as well the source and amount of the financial contributions to the fund for meeting these costs, including how they have evolved over time. finally, it provides some personal reflections on this issue. (Author)
Probabilistic Relational Structures and Their Applications

Science.gov (United States)

Domotor, Zoltan

The principal objects of the investigation reported were, first, to study qualitative probability relations on Boolean algebras, and secondly, to describe applications in the theories of probability logic, information, automata, and probabilistic measurement. The main contribution of this work is stated in 10 definitions and 20 theorems. The basic…
Nuclear liability: Joint protocol relating to the application of the Vienna Convention and the Paris Convention, 1988

International Nuclear Information System (INIS)

1989-10-01

The Joint Protocol Relating to the Application of the Vienna Convention and the Paris Convention was adopted by the Conference on the Relationship between the Paris Convention and the Vienna Convention, which met in Vienna, at the Headquarters of the International Atomic Energy Agency on 21 September 1988. The Joint Protocol establishes a link between the Paris Convention on Third Party Liability in the Field of Nuclear Energy of 1960 and the Vienna Convention on Civil Liability for Nuclear Damage of 1963. The Joint Protocol will extend to the States adhering to it the coverage of the two Conventions. It will also resolve potential conflicts of law, which could result from the simultaneous application of the two Conventions to the same nuclear accident. The Conference on the Relationship between the Paris Convention and the Vienna Convention was jointly organized by the International Atomic Energy Agency and the OECD Nuclear Energy Agency. This publication contains the text of the Final Act of the Conference in the six authentic languages, the Joint Protocol Relating to the Application of the Vienna Convention and the Paris Convention, also in the six authentic languages and an explanatory note, prepared by the IAEA and NEA Secretariats, providing background information on the content of the Joint Protocol
Numerical Relativity, Black Hole Mergers, and Gravitational Waves: Part III

Science.gov (United States)

Centrella, Joan

2012-01-01

This series of 3 lectures will present recent developments in numerical relativity, and their applications to simulating black hole mergers and computing the resulting gravitational waveforms. In this third and final lecture, we present applications of the results of numerical relativity simulations to gravitational wave detection and astrophysics.
Relations between heat exchange and Rényi divergences

Science.gov (United States)

Wei, Bo-Bo

2018-04-01

In this work, we establish an exact relation which connects the heat exchange between two systems initialized in their thermodynamic equilibrium states at different temperatures and the Rényi divergences between the initial thermodynamic equilibrium state and the final nonequilibrium state of the total system. The relation tells us that the various moments of the heat statistics are determined by the Renyi divergences between the initial equilibrium state and the final nonequilibrium state of the global system. In particular the average heat exchange is quantified by the relative entropy between the initial equilibrium state and the final nonequilibrium state of the global system. The relation is applicable to both finite classical systems and finite quantum systems.
WTEC Panel on Power applications of superconductivity in Japan and Germany. Final report

International Nuclear Information System (INIS)

Shelton, R.D.; Larbalestier, David; Blaugher, Richard D.; Schwall, Robert E.; Sokolowski, Robert S.; Suenaga, Masaki; Willis, JefFR-ey O.

1997-01-01

In early 1996, the U.S. Department of Energy and National Science Foundation asked the World Technology Evaluation Center (WTEC) to assemble a panel to assess, relative to the United States, how Japan and Germany are responding to the challenge of applying superconductivity to power and energy applications. Although the study was focused mostly on the impact of high-temperature superconductors (HTS) on the power applications field, the WTEC panel also looked at many applications for low-temperature superconductors (LTS). The market for low-temperature superconductor applications is well established, as is that for superconducting electronics, for which there is a separate WTEC panel. The panel on power applications of superconductivity was commissioned to identify the roles of public organizations, industry, and academia for advancing power applications of superconductivity, taking both a present and a long-term view
WTEC Panel on Power applications of superconductivity in Japan and Germany. Final report

CERN Document Server

Shelton, R D; Larbalestier, D; Schwall, R E; Sokolowski, R S; Suenaga, M; Willis, J E O

1997-01-01

In early 1996, the U.S. Department of Energy and National Science Foundation asked the World Technology Evaluation Center (WTEC) to assemble a panel to assess, relative to the United States, how Japan and Germany are responding to the challenge of applying superconductivity to power and energy applications. Although the study was focused mostly on the impact of high-temperature superconductors (HTS) on the power applications field, the WTEC panel also looked at many applications for low-temperature superconductors (LTS). The market for low-temperature superconductor applications is well established, as is that for superconducting electronics, for which there is a separate WTEC panel. The panel on power applications of superconductivity was commissioned to identify the roles of public organizations, industry, and academia for advancing power applications of superconductivity, taking both a present and a long-term view.
Development of Zinc/Bromine Batteries for Load-Leveling Applications: Phase 2 Final Report

Energy Technology Data Exchange (ETDEWEB)

CLARK,NANCY H.; EIDLER,PHILLIP

1999-10-01

This report documents Phase 2 of a project to design, develop, and test a zinc/bromine battery technology for use in utility energy storage applications. The project was co-funded by the U.S. Department of Energy Office of Power Technologies through Sandia National Laboratories. The viability of the zinc/bromine technology was demonstrated in Phase 1. In Phase 2, the technology developed during Phase 1 was scaled up to a size appropriate for the application. Batteries were increased in size from 8-cell, 1170-cm{sup 2} cell stacks (Phase 1) to 8- and then 60-cell, 2500-cm{sup 2} cell stacks in this phase. The 2500-cm{sup 2} series battery stacks were developed as the building block for large utility battery systems. Core technology research on electrolyte and separator materials and on manufacturing techniques, which began in Phase 1, continued to be investigated during Phase 2. Finally, the end product of this project was a 100-kWh prototype battery system to be installed and tested at an electric utility.
Ashes in concrete related applications. Regulations, best practice and experiences; Energiaskor i betongrelaterade tillaempningar. Normer, praxis och erfarenheter

Energy Technology Data Exchange (ETDEWEB)

Nordstroem, Erik; Thorsell, Per-Erik

2003-10-01

A compilation of regulations and best practice from different techniques to utilize ashes in concrete related applications is presented in this report. The term 'concrete related' applications also include geotechnical applications where cement is used as a binder. It can be seen that fully developed regulations is only available for concrete used as a structural building material. In other applications the formulations give an opportunity to use alternative materials as long as similar properties are achieved. In some applications not even this type of regulations are available but the alternatives are judged from case to case. The purpose with this work was to high-light acceptable variations for the parameters where limitations on constituent materials are formulated. During the work it has become clear that the task is not possible to solve since this kind of values seldom are available. A discussion about the economical potential for different applications is presented in the end of the report. In summary, the concrete applications do not allow the major part of the ashes to be utilized and the demands on the ashes are high. But it can also be stated that the high costs for cement give a big incitement for change of binder in concrete to e.g. flyash. In the geotechnical applications there is also a big potential both regarding technical and economical aspects, but the possible effects on soil and ground water will give rise to more rigorous considerations by the environmental authorities. Finally, the mining applications can give a large amount of ashes to be utilized in a limited region, and the transport cost can be problematic for the ash producers. The conclusions from the present work are that there exist several possible concrete applications also for other ashes than pure coal ashes. Type of ash, available amounts, storage facilities, local market, stability in fuel-mix, personal interests are important parameters influencing the possibilities
Hyperbolic Conservation Laws and Related Analysis with Applications

CERN Document Server

Holden, Helge; Karlsen, Kenneth

2014-01-01

This book presents thirteen papers, representing the most significant advances and current trends in nonlinear hyperbolic conservation laws and related analysis with applications. Topics covered include a survey on multidimensional systems of conservation laws as well as novel results on liquid crystals, conservation laws with discontinuous flux functions, and applications to sedimentation. Also included are articles on recent advances in the Euler equations and the Navier-Stokes-Fourier-Poisson system, in addition to new results on collective phenomena described by the Cucker-Smale model. The Workshop on Hyperbolic Conservation Laws and Related Analysis with Applications at the International Centre for Mathematical Sciences (Edinburgh, UK) held in Edinburgh, September 2011, produced this fine collection of original research and survey articles. Many leading mathematicians attended the event and submitted their contributions for this volume. It is addressed to researchers and graduate students inter...
29 CFR 34.46 - Final Determination.

Science.gov (United States)

2010-07-01

... TRAINING PARTNERSHIP ACT OF 1982, AS AMENDED (JTPA) Compliance Procedures § 34.46 Final Determination. (a... grant applicant or recipient fails or refuses to correct the violation(s) within the applicable time...
MORE: Management of Requirements in NPP Modernisation Projects, final report

International Nuclear Information System (INIS)

Fredriksen, R.; Katta, V.; Raspotnig, C.; Valkonen, J.

2008-09-01

This report documents the work and related activities of the MORE (Management of Requirements in NPP Modernisation Projects) (NKS-R project number NKS-R-2005-47) project. This report also provides a summary of the project activities and deliverables, and discusses possible application areas. The project has aimed at the industrial utilisation of the results from the TACO: (Traceability and Communication of Requirements in Digital I and C Systems Development) (NKS-R project number NKS-R-2002-16, completed June, 2005) project, and practical application of improved approaches and methods for requirements engineering and change management. Finally, the report provides a brief description of the extended industrial network and disseminations of the results in Nordic and NKS related events such as seminars and workshops. (au)
MORE: Management of Requirements in NPP Modernisation Projects, final report

Energy Technology Data Exchange (ETDEWEB)

Fredriksen, R.; Katta, V.; Raspotnig, C. (Inst. for energiteknikk (IFE) (Norway)); Valkonen, J. (Technical Research Centre of Finland (VTT) (Finland))

2008-09-15

This report documents the work and related activities of the MORE (Management of Requirements in NPP Modernisation Projects) (NKS-R project number NKS-R-2005-47) project. This report also provides a summary of the project activities and deliverables, and discusses possible application areas. The project has aimed at the industrial utilisation of the results from the TACO: (Traceability and Communication of Requirements in Digital I and C Systems Development) (NKS-R project number NKS-R-2002-16, completed June, 2005) project, and practical application of improved approaches and methods for requirements engineering and change management. Finally, the report provides a brief description of the extended industrial network and disseminations of the results in Nordic and NKS related events such as seminars and workshops. (author)
Parseval-Type Relations for Laplace Transform and their Applications

Science.gov (United States)

Herman, S.; Maceli, J.; Rogala, M.; Yurekli, O.

2008-01-01

In the present note, two Parseval-type relations involving the Laplace transform are given. The application of the relations is demonstrated in evaluating improper integrals and Laplace transforms of trigonometric functions.
76 FR 70169 - Draft Supplement 2 to Final Environmental Statement Related to the Operation of Watts Bar Nuclear...

Science.gov (United States)

2011-11-10

... Environmental Statement Related to the Operation of Watts Bar Nuclear Plant, Unit 2; Tennessee Valley Authority... on NUREG-0498, ``Final Environmental Statement, Supplement 2, Related to the Operation of Watts Bar... the Nuclear Regulatory Commission. Stephen J. Campbell, Chief, Watts Bar Special Projects Branch...
Relational Constraint Driven Test Case Synthesis for Web Applications

Directory of Open Access Journals (Sweden)

Xiang Fu

2010-09-01

Full Text Available This paper proposes a relational constraint driven technique that synthesizes test cases automatically for web applications. Using a static analysis, servlets can be modeled as relational transducers, which manipulate backend databases. We present a synthesis algorithm that generates a sequence of HTTP requests for simulating a user session. The algorithm relies on backward symbolic image computation for reaching a certain database state, given a code coverage objective. With a slight adaptation, the technique can be used for discovering workflow attacks on web applications.
Distribution of blood derivatives by registered blood establishments that qualify as health care entities; Prescription Drug Marketing Act of 1987; Prescription Drug Amendments of 1992; delay of applicability date. Final rule; delay of applicability date.

Science.gov (United States)

2006-11-13

The Food and Drug Administration (FDA) is further delaying, until December 1, 2008, the applicability date of a certain requirement of a final rule published in the Federal Register of December 3, 1999 (64 FR 67720) (the final rule). The final rule implements the Prescription Drug Marketing Act of 1987 (PDMA), as modified by the Prescription Drug Amendments of 1992 (PDA), and the Food and Drug Administration Modernization Act of 1997 (the Modernization Act). The provisions of the final rule became effective on December 4, 2000, except for certain provisions whose effective or applicability dates were delayed in five subsequent Federal Register notices, until December 1, 2006. The provision with the delayed applicability date would prohibit wholesale distribution of blood derivatives by registered blood establishments that meet the definition of a "health care entity." In the Federal Register of February 1, 2006 (71 FR 5200), FDA published a proposed rule specific to the distribution of blood derivatives by registered blood establishments that qualify as health care entities (the proposed rule). The proposed rule would amend certain limited provisions of the final rule to allow certain registered blood establishments that qualify as health care entities to distribute blood derivatives. In response to the proposed rule, FDA received substantive comments. As explained in the SUPPLEMENTARY INFORMATION section of this document, further delaying the applicability of Sec. 203.3(q) (21 CFR 203.3(q)) to the wholesale distribution of blood derivatives by health care entities is necessary to give the agency additional time to address comments on the proposed rule, consider whether regulatory changes are appropriate, and, if so, to initiate such changes.
78 FR 13666 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2013-02-28

... Telecommunications Company Limited. Guarantor(s): N/A. Description of Items Being Exported: To finance the... EXPORT-IMPORT BANK [Public Notice 2013-0015] Application for Final Commitment for a Long-Term Loan... States. ACTION: Notice. SUMMARY: This Notice is to inform the public, in accordance with Section 3(c)(10...

78 FR 20317 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2013-04-04

... supplying information that competitors could use to compete with companies in the United States. DATES... or Financial Guarantee in Excess of $100 Million: AP087223XX and AP087223XA AGENCY: Export-Import...''), that Ex-Im Bank has received an application for final commitment for a long-term loan or financial...
78 FR 59688 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2013-09-27

... EXPORT-IMPORT BANK OF THE UNITED STATES [Public Notice: 2013-0049] Application for Final... AGENCY: Export-Import Bank of the United States. ACTION: Notice. SUMMARY: This Notice is to inform the public, in accordance with Section 3(c)(10) of the Charter of the Export-Import Bank of the United States...
78 FR 2673 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2013-01-14

... EXPORT-IMPORT BANK OF THE UNITED STATES [Public Notice: 2013-0102] Application for Final... AGENCY: Export-Import Bank of the United States. ACTION: Notice. SUMMARY: This Notice is to inform the public, in accordance with Section 3(c)(10) of the Charter of the Export-Import Bank of the United States...
78 FR 20913 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2013-04-08

... the transaction: To support the export of U.S. manufactured commercial aircraft to China. Brief non... EXPORT-IMPORT BANK [Public Notice 2013-0024] Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100 million: AP087801XX AGENCY: Export-Import Bank of the United...
77 FR 61750 - Application for Final Commitment for a Long-term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2012-10-11

... export of a U.S.-manufactured satellite and associated services to China (Hong Kong). Brief non-proprietary description of the anticipated use of the items being exported: The U.S. exports will be used to... EXPORT-IMPORT BANK OF THE UNITED STATES [Public Notice 2012-0528] Application for Final Commitment...
78 FR 33090 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2013-06-03

...-haul passenger service from Australia to other countries. To the extent that Ex-Im Bank is reasonably... EXPORT-IMPORT BANK [Public Notice 2013-0030] Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100 Million: AP087980XX AGENCY: Export-Import Bank of the United...
Application of quality assurance program to safety related aging equipment or components

International Nuclear Information System (INIS)

Papaiya, N.C.

1990-01-01

This paper addresses how quality assurance programs and their criteria are applied to safety related and aging equipment or components used in commercial nuclear plant applications. The QA Programs referred to are 10CFR50 Appendix B and EPRI NP-5652. The QA programs as applicable are applied to equipment/component aging qualification, preventive maintenance, surveillance testing and procurement engineering. The intent of this paper is not the technical issues, methods and research of aging. The paper addresses QA program's application to age-related equipment or components in safety related applications. Quality Assurance Program 10CFR50 Appendix B applies to all safety related aging components or equipment related to the qualification program and associated preventive maintenance and surveillance testing programs. Quality Assurance involvement with procurement engineering for age-related commercial grade items supports EPRI NP-5652 and assures that the dedicated OGI is equal to the item purchased as a basic component to 10CFR50 Appendix B requirements
Solar feasibility study for site-specific industrial-process-heat applications. Final report

Energy Technology Data Exchange (ETDEWEB)

Murray, O.L.

1980-03-18

This study addresses the technical feasibility of solar energy in industrial process heat (IPH) applications in Mid-America. The study was one of two contracted efforts covering the MASEC 12-state region comprised of: Illinois, Michigan, North Dakota, Indiana, Minnesota, Ohio, Iowa, Missouri, South Dakota, Kansas, Nebraska, Wisconsin. The results of our study are encouraging to the potential future role of solar energy in supplying process heat to a varied range of industries and applications. We identified and developed Case Study documentation of twenty feasible solar IPH applications covering eight major SIC groups within the Mid-American region. The geographical distribution of these applications for the existing range of solar insolation levels are shown and the characteristics of the applications are summarized. The results of the study include process identification, analysis of process heat requirements, selection of preliminary solar system characteristics, and estimation of system performance and cost. These are included in each of the 20 Case Studies. The body of the report is divided into two primary discussion sections dealing with the Study Methodology employed in the effort and the Follow-On Potential of the identified applications with regard to possible demonstration projects. The 20 applications are rated with respect to their relative overall viability and procedures are discussed for possible demonstration project embarkment. Also, a possible extension of this present feasibility study for late-comer industrial firms expressing interest appears worthy of consideration.
Investigations on detonation shock dynamics and related topics. Final report

Energy Technology Data Exchange (ETDEWEB)

Stewart, D.S. [Univ. of Illinois, Urbana, IL (United States). Dept. of Theoretical and Applied Mechanics

1993-11-01

This document is a final report that summarizes the research findings and research activities supported by the subcontract DOE-LANL-9-XG8-3931P-1 between the University of Illinois (D. S. Stewart Principal Investigator) and the University of California (Los Alamos National Laboratory, M-Division). The main focus of the work has been on investigations of Detonation Shock Dynamics. A second emphasis has been on modeling compaction of energetic materials and deflagration to detonation in those materials. The work has led to a number of extensions of the theory of Detonation Shock Dynamics (DSD) and its application as an engineering design method for high explosive systems. The work also enhanced the hydrocode capabilities of researchers in M-Division by modifications to CAVEAT, an existing Los Alamos hydrocode. Linear stability studies of detonation flows were carried out for the purpose of code verification. This work also broadened the existing theory for detonation. The work in this contract has led to the development of one-phase models for dynamic compaction of porous energetic materials and laid the groundwork for subsequent studies. Some work that modeled the discrete heterogeneous behavior of propellant beds was also performed. The contract supported the efforts of D. S. Stewart and a Postdoctoral student H. I. Lee at the University of Illinois.
78 FR 21948 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2013-04-12

... EXPORT-IMPORT BANK OF THE UNITED STATES [Public Notice: 2013-0027] Application for Final...-Import Bank of the United States. ACTION: Notice. SUMMARY: This Notice is to inform the public, in accordance with Section 3(c)(10) of the Charter of the Export-Import Bank of the United States (``Ex-Im Bank...
78 FR 16852 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2013-03-19

... EXPORT-IMPORT BANK OF THE UNITED STATES [Public Notice: 2013-0024] Application for Final...-Import Bank of the United States. ACTION: Notice. SUMMARY: This Notice is to inform the public, in accordance with Section 3(c)(10) of the Charter of the Export-Import Bank of the United States (``Ex-Im Bank...
78 FR 39285 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2013-07-01

... EXPORT-IMPORT BANK OF THE UNITED STATES [Public Notice: 2013-0033] Application for Final...-Import Bank of the United States. ACTION: Notice. SUMMARY: This Notice is to inform the public, in accordance with Section 3(c)(10) of the Charter of the Export-Import Bank of the United States (``Ex-Im Bank...
78 FR 78955 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2013-12-27

... EXPORT-IMPORT BANK OF THE UNITED STATES [Public Notice: 2013-0060] Application for Final... AP088412XB AGENCY: Export-Import Bank of the United States. ACTION: Notice. SUMMARY: This Notice is to inform the public, in accordance with Section 3(c)(10) of the Charter of the Export-Import Bank of the United...
78 FR 56227 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2013-09-12

... EXPORT-IMPORT BANK OF THE UNITED STATES [Public Notice: 2013-0045] Application for Final...-Import Bank of the United States. ACTION: Notice. SUMMARY: This Notice is to inform the public, in accordance with Section 3(c)(10) of the Charter of the Export-Import Bank of the United States (``Ex-Im Bank...
77 FR 74010 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2012-12-12

... EXPORT-IMPORT BANK OF THE UNITED STATES [Public Notice: 2012-0546] Application for Final...-Import Bank of the United States. ACTION: Notice. SUMMARY: This Notice is to inform the public, in accordance with Section 3(c)(10) of the Charter of the Export-Import Bank of the United States (``Ex-Im Bank...
78 FR 1211 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2013-01-08

... EXPORT-IMPORT BANK OF THE UNITED STATES [Public Notice 2012-0558] Application for Final Commitment...-Import Bank of the United States. ACTION: Notice. SUMMARY: This Notice is to inform the public, in accordance with Section 3(c)(10) of the Charter of the Export-Import Bank of the United States (``Ex-Im Bank...
78 FR 23763 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2013-04-22

... EXPORT-IMPORT BANK OF THE UNITED STATES [Public Notice: 2013-0028] Application for Final...-Import Bank of the United States. ACTION: Notice. SUMMARY: This Notice is to inform the public, in accordance with Section 3(c)(10) of the Charter of the Export-Import Bank of the United States (``Ex-Im Bank...
78 FR 76614 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2013-12-18

... EXPORT-IMPORT BANK OF THE UNITED STATES [Public Notice: 2013-0059] Application for Final...-Import Bank of the United States. ACTION: Notice. SUMMARY: This Notice is to inform the public, in accordance with Section 3(c)(10) of the Charter of the Export-Import Bank of the United States (``Ex-Im Bank...
78 FR 16675 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2013-03-18

... EXPORT-IMPORT BANK OF THE UNITED STATES [Public Notice: 2013-0023] Application for Final...-Import Bank of the United States. ACTION: Notice. SUMMARY: This Notice is to inform the public, in accordance with Section 3(c)(10) of the Charter of the Export-Import Bank of the United States (``Ex-Im Bank...
78 FR 42072 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2013-07-15

... EXPORT-IMPORT BANK OF THE UNITED STATES [Public Notice: 2013-0034] Application for Final...-Import Bank of the United States. ACTION: Notice. SUMMARY: This Notice is to inform the public, in accordance with Section 3(c)(10) of the Charter of the Export-Import Bank of the United States (``Ex-Im Bank...

78 FR 2672 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2013-01-14

... EXPORT-IMPORT BANK OF THE UNITED STATES [Public Notice: 2013-0101] Application for Final..., AP078595XB AGENCY: Export-Import Bank of the United States. ACTION: Notice. SUMMARY: This Notice is to inform the public, in accordance with Section 3(c)(10) of the Charter of the Export-Import Bank of the United...
77 FR 70161 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2012-11-23

... the transaction: To support the export of U.S. manufactured aircraft under operating lease from the... China. To the extent that Ex-Im Bank is reasonably aware, the item(s) being exported are not expected to... EXPORT-IMPORT BANK [Public Notice 2012-0543] Application for Final Commitment for a Long-Term Loan...
78 FR 69850 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2013-11-21

..., rail and port facilities in Australia. To the extent that Ex-Im Bank is reasonably aware, the item(s... EXPORT-IMPORT BANK [Public Notice: 2013-0054] Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100 Million: AP086750XX AGENCY: Export-Import Bank of the...
The final management of nuclear fuel. Legal and economic aspects

International Nuclear Information System (INIS)

Villota, C. de

2009-01-01

This article gives a brief summary of the characteristics of spent fuel and the lines of action considered for its management. It describes the legal framework that supports the Radioactive Waste Management Plan (PGRR), which contains the lines applicable to Final Spent Fuel Management, as well as the evolution of this legal framework. The article contains the 2008 updated costs of the various items of the PGRR, with a more detailed description of those related to this type of fuel, as well the source and amount of the financial contributions to the fund for meeting these costs, including how they have evolved over time. finally, it provides some personal reflections on this issue. (Author)
Statistical Validation of a Web-Based GIS Application and Its Applicability to Cardiovascular-Related Studies.

Science.gov (United States)

Lee, Jae Eun; Sung, Jung Hye; Malouhi, Mohamad

2015-12-22

There is abundant evidence that neighborhood characteristics are significantly linked to the health of the inhabitants of a given space within a given time frame. This study is to statistically validate a web-based GIS application designed to support cardiovascular-related research developed by the NIH funded Research Centers in Minority Institutions (RCMI) Translational Research Network (RTRN) Data Coordinating Center (DCC) and discuss its applicability to cardiovascular studies. Geo-referencing, geocoding and geospatial analyses were conducted for 500 randomly selected home addresses in a U.S. southeastern Metropolitan area. The correlation coefficient, factor analysis and Cronbach's alpha (α) were estimated to quantify measures of the internal consistency, reliability and construct/criterion/discriminant validity of the cardiovascular-related geospatial variables (walk score, number of hospitals, fast food restaurants, parks and sidewalks). Cronbach's α for CVD GEOSPATIAL variables was 95.5%, implying successful internal consistency. Walk scores were significantly correlated with number of hospitals (r = 0.715; p restaurants (r = 0.729; p application were internally consistent and demonstrated satisfactory validity. Therefore, the GIS application may be useful to apply to cardiovascular-related studies aimed to investigate potential impact of geospatial factors on diseases and/or the long-term effect of clinical trials.
Summary report of the final technical meeting on 'International Reactor Dosimetry File: IRDF-2002'

International Nuclear Information System (INIS)

Griffin, Patrick J.; Paviotti-Corcuera, R.

2003-10-01

Presentations, recommendations and conclusions of the Final Technical Meeting on 'International Reactor Dosimetry File: IRDF-2002' are summarized in this report. The main aims of this meeting were to discuss scientific and technical matters related to reactor dosimetry and to assign responsibilities for the preparation of the final version of the IRDF- 2002 library and the associated TECDOC. Tasks were assigned and deadlines were agreed. Participants emphasized that accurate and complete nuclear data for reactor dosimetry are essential to improve the assessment accuracies for reactor pressure vessel service lifetimes in nuclear power plants, as well as for other neutron metrology applications such as boron neutron capture therapy, therapeutic use of medical isotopes, nuclear physics measurements, and reactor safety applications. (author)
Virtual reality. Fundamentals and nuclear related applications

International Nuclear Information System (INIS)

Ishii, Hirotake

2010-01-01

Since the first virtual reality (VR) system was developed by Dr. Ivan Sutherland in the 1960s, various research and development have been conducted to apply VR to many fields. One promising applications is a nuclear-related one. VR is useful for control room design support, operation training, maintenance training, decommissioning planning support, nuclear education, work image sharing, telecollaboration, and even providing an experimental test-bed. In this lecture note, fundamental knowledge of VR is presented first, and various VR applications to nuclear fields are stated along with their advantages. Then appropriate cases for introducing VR are summarized and future prospects are given. (author)
75 FR 34537 - Interim Final Rules for Group Health Plans and Health Insurance Coverage Relating to Status as a...

Science.gov (United States)

2010-06-17

... 45 CFR Part 147 Group Health Plans and Health Insurance Coverage Relating to Status as a... for Group Health Plans and Health Insurance Coverage Relating to Status as a Grandfathered Health Plan... and Insurance Oversight, Department of Health and Human Services. ACTION: Interim final rules with...
77 FR 47382 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2012-08-08

... EXPORT-IMPORT BANK OF THE UNITED STATES [Public Notice 2012-0345] Application for Final Commitment...: Export-Import Bank of the U.S. ACTION: Notice. SUMMARY: This Notice is to inform the public, in accordance with Section 3(c)(10) of the Charter of the Export-Import Bank of the United States (``Ex-Im Bank...
78 FR 67144 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Science.gov (United States)

2013-11-08

... EXPORT-IMPORT BANK [Public Notice 2013-0050] Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100 Million: AP086418XX AGENCY: Export-Import Bank of the United...) of the Charter of the Export-Import Bank of the United States (``Ex-Im Bank''), that Ex-Im Bank has...
Dirichlet and Related Distributions Theory, Methods and Applications

CERN Document Server

Ng, Kai Wang; Tang, Man-Lai

2011-01-01

The Dirichlet distribution appears in many areas of application, which include modelling of compositional data, Bayesian analysis, statistical genetics, and nonparametric inference. This book provides a comprehensive review of the Dirichlet distribution and two extended versions, the Grouped Dirichlet Distribution (GDD) and the Nested Dirichlet Distribution (NDD), arising from likelihood and Bayesian analysis of incomplete categorical data and survey data with non-response. The theoretical properties and applications are also reviewed in detail for other related distributions, such as the inve
Spent fuel management strategies in eight countries and applicability to Sweden. Final report

International Nuclear Information System (INIS)

1986-01-01

The spent fuel management activities described in volume 1 are compared in three areas. The first section summarizes the spent fuel management options being followed in each country and compares those options with regard to cost, environmental impact and public acceptability. Next section reviews and compares national policies on nuclear power, spent fuel management and high-level waste disposal and assesses their impact on the development and licensing of nuclear power plants. The third section compares the regulatory requirements affecting spent fuel managementin terms of their overall spirit and characteristics and in terms of the responsibilities of the utilities and the regulatory authorities. Finally, the last section addresses the applicability to Sweden of the findings from these comparisons, focusing on cost efficiency, health and safety, environmental impact, public acceptance and licensing procedures
Commercial Application of a Photovoltaic Concentrator system. Phase I. Final report, 1 June 1978-28 February 1979

Energy Technology Data Exchange (ETDEWEB)

Anderson, D.J.; Anderson, E.R.; Bardwell, K.M.

1980-04-01

This report documents the design and analysis of the BDM CAPVC (Commercial Application of a Photovoltaic Concentrator) system. The preliminary design, prototype test and evaluation, system analysis, and final design of a large-scale concentrating photovoltaic system are described. The application is on an attractive new office building which represents a large potential market. The photovoltaic concentrating array is a roof-mounted, single-axis linear parabolic trough, using single crystalline silicon photovoltaic cells. A total of 6720 square feet of aperture is focussed on 13,944 PV cells. The photovoltaic system operates in parallel with the local utility in an augmentary loadsharing operating mode. The array is actively cooled and the thermal energy utilized for building heat during winter months. (WHK)
Patent prosecution strategies for stem cell related applications.

Science.gov (United States)

Kumar, Rajeev; Yeh, Jenny J; Fernandez, Dennis; Hansen, Nels

2007-09-01

Stem cell research and the intellectual property derived from it, because of its potential to completely transform health care, demand an especially high level of consideration from business and patent prosecution perspectives. As with other revolutionary technologies, ordinary risks are amplified (e.g., litigation), and ordinarily irrelevant considerations may become important (e.g., heightened level of both domestic and foreign legislative risk). In the first part of this article, general strategies for patent prosecutors such as several prosecution considerations and methods for accelerating patent prosecution process are presented. In the second part, patent prosecution challenges of stem cell-related patents and possible solutions are discussed. In the final part, ethical and public policy issues particular to stem cell-related and other biotechnological inventions are summarized.
Biosurfactants: promising bioactive molecules for oral-related health applications.

Science.gov (United States)

Elshikh, Mohamed; Marchant, Roger; Banat, Ibrahim M

2016-09-01

Biosurfactants are naturally produced molecules that demonstrate potentially useful properties such as the ability to reduce surface tensions between different phases. Besides having similar properties to their artificial chemical counterparts, they are regarded as environmental friendly, biodegradable and less toxic, which make them desirable candidates for downstream applications. The structure-activity-related properties of the biosurfactants which are directly correlated with potency of the biosurfactants as antimicrobial agents, the ability of the biosurfactants to alter surface energies and their ability to increase bioavailability are particularly what attract researchers to exploit their potential use in the oral-related health applications. Current research into biosurfactant indicates significant future potential for use in cosmetic and therapeutic oral hygiene product formulations and related medical device treatments. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Some applications of uncertainty relations in quantum information

Science.gov (United States)

Majumdar, A. S.; Pramanik, T.

2016-08-01

We discuss some applications of various versions of uncertainty relations for both discrete and continuous variables in the context of quantum information theory. The Heisenberg uncertainty relation enables demonstration of the Einstein, Podolsky and Rosen (EPR) paradox. Entropic uncertainty relations (EURs) are used to reveal quantum steering for non-Gaussian continuous variable states. EURs for discrete variables are studied in the context of quantum memory where fine-graining yields the optimum lower bound of uncertainty. The fine-grained uncertainty relation is used to obtain connections between uncertainty and the nonlocality of retrieval games for bipartite and tripartite systems. The Robertson-Schrödinger (RS) uncertainty relation is applied for distinguishing pure and mixed states of discrete variables.
EXPOsOMICS: final policy workshop and stakeholder consultation.

Science.gov (United States)

Turner, Michelle C; Vineis, Paolo; Seleiro, Eduardo; Dijmarescu, Michaela; Balshaw, David; Bertollini, Roberto; Chadeau-Hyam, Marc; Gant, Timothy; Gulliver, John; Jeong, Ayoung; Kyrtopoulos, Soterios; Martuzzi, Marco; Miller, Gary W; Nawrot, Timothy; Nieuwenhuijsen, Mark; Phillips, David H; Probst-Hensch, Nicole; Samet, Jonathan; Vermeulen, Roel; Vlaanderen, Jelle; Vrijheid, Martine; Wild, Christopher; Kogevinas, Manolis

2018-02-15

The final meeting of the EXPOsOMICS project "Final Policy Workshop and Stakeholder Consultation" took place 28-29 March 2017 to present the main results of the project and discuss their implications both for future research and for regulatory and policy activities. This paper summarizes presentations and discussions at the meeting related with the main results and advances in exposome research achieved through the EXPOsOMICS project; on other parallel research initiatives on the study of the exposome in Europe and in the United States and their complementarity to EXPOsOMICS; lessons learned from these early studies on the exposome and how they may shape the future of research on environmental exposure assessment; and finally the broader implications of exposome research for risk assessment and policy development on environmental exposures. The main results of EXPOsOMICS in relation to studies of the external exposome and internal exposome in relation to both air pollution and water contaminants were presented as well as new technologies for environmental health research (adductomics) and advances in statistical methods. Although exposome research strengthens the scientific basis for policy development, there is a need in terms of showing added value for public health to: improve communication of research results to non-scientific audiences; target research to the broader landscape of societal challenges; and draw applicable conclusions. Priorities for future work include the development and standardization of methodologies and technologies for assessing the external and internal exposome, improved data sharing and integration, and the demonstration of the added value of exposome science over conventional approaches in answering priority policy questions.
Glass fibre sensors for medical applications - fibre-optical dosimeter system. Cooperation project 1991-1994. Final report

International Nuclear Information System (INIS)

1996-01-01

The final report summarizes the results of a cooperation project on the applications of fibre-optical sensors in medical technology. The FADOS dosimeter system is presented which comprises an implantable glass fibre dosimeter. It can be applied in radiotherapy for online dose metering directly at the tumour or in the surrounding healthy tissue. The dosimeter is placed in a tissue-compatible flexible catheter tube and remains inside the body during the radiotherapy treatiment. The measuring principle is based on the effect of radiation-induced damping inside a glass fibre. (DG) [de
Sequential computerized tomography changes and related final outcome in severe head injury patients

International Nuclear Information System (INIS)

Lobato, R.D.; Gomez, P.A.; Alday, R.

1997-01-01

The authors analyzed the serial computerized tomography (CT) findings in a large series of severely head injured patients in order to assess the variability in gross intracranial pathology through the acute posttraumatic period and determine the most common patterns of CT change. A second aim was to compare the prognostic significance of the different CT diagnostic categories used in the study (Traumatic Coma Data Bank CT pathological classification) when gleaned either from the initial (postadmission) or the control CT scans, and determine the extent to which having a second CT scan provides more prognostic information than only one scan. 92 patients (13.3 % of the total population) died soon after injury. Of the 587 who survived long enough to have at least one control CT scan 23.6 % developed new diffuse brain swelling, and 20.9 % new focal mass lesions most of which had to be evacuated. The relative risk for requiring a delayed operation as related to the diagnostic category established by using the initial CT scans was by decreasing order: diffuse injury IV (30.7 %), diffuse injury III (30.5 %), non evacuated mass (20 %), evacuated mass (20.2 %), diffuse injury II (12.1 %), and diffuse injury I (8.6 %). Overall, 51.2 % of the patients developed significant CT changes (for worse or better) occurring either spontaneously or following surgery, and their final outcomes were more closely related to the control than to the initial CT diagnoses. In fact, the final outcome was more accurately predicted by using the control CT scans (81.2 % of the cases) than by using the initial CT scans (71.5 % of the cases only). Since the majority of relevant CT changes developed within 48 hours after injury a pathological categorization made by using an early control CT scan seems to be most useful for prognostic purposes. Prognosis associated with the CT pathological categories used in the study was similar independently of the moment of the acute posttraumatic period at which
Relational database hybrid model, of high performance and storage capacity for nuclear engineering applications

International Nuclear Information System (INIS)

Gomes Neto, Jose

2008-01-01

The objective of this work is to present the relational database, named FALCAO. It was created and implemented to support the storage of the monitored variables in the IEA-R1 research reactor, located in the Instituto de Pesquisas Energeticas e Nucleares, IPEN/CNEN-SP. The data logical model and its direct influence in the integrity of the provided information are carefully considered. The concepts and steps of normalization and de normalization including the entities and relations involved in the logical model are presented. It is also presented the effects of the model rules in the acquisition, loading and availability of the final information, under the performance concept since the acquisition process loads and provides lots of information in small intervals of time. The SACD application, through its functionalities, presents the information stored in the FALCAO database in a practical and optimized form. The implementation of the FALCAO database occurred successfully and its existence leads to a considerably favorable situation. It is now essential to the routine of the researchers involved, not only due to the substantial improvement of the process but also to the reliability associated to it. (author)

Issues relating to airborne applications of HTS SQUIDs

International Nuclear Information System (INIS)

Foley, C P; Leslie, K E; Binks, R A; Lam, S H K; Du, J; Tilbrook, D L; Mitchell, E E; Macfarlane, J C; Lee, J B; Turner, R; Downey, M; Maddever, A

2002-01-01

Airborne application of HTS SQUIDs is the most difficult environment for their successful deployment. In order to operate with the sensitivity required for a particular application, there are many issues to be addressed such as the need for very wide dynamic range electronics, motion noise elimination, immunity to large changing magnetic fields and cultural noise sources. This paper reviews what is necessary to achieve an airborne system giving examples in geophysical mineral exploration. It will consider issues relating to device design and fabrication, electronics, dewar design, suspension system requirements and noise elimination methods
Issues relating to airborne applications of HTS SQUIDs

CERN Document Server

Foley, C P; Binks, R A; Lam, S H K; Du, J; Tilbrook, D L; Mitchell, E E; MacFarlane, J C; Lee, J B; Turner, R; Downey, M; Maddever, A

2002-01-01

Airborne application of HTS SQUIDs is the most difficult environment for their successful deployment. In order to operate with the sensitivity required for a particular application, there are many issues to be addressed such as the need for very wide dynamic range electronics, motion noise elimination, immunity to large changing magnetic fields and cultural noise sources. This paper reviews what is necessary to achieve an airborne system giving examples in geophysical mineral exploration. It will consider issues relating to device design and fabrication, electronics, dewar design, suspension system requirements and noise elimination methods.
Application of fusion plasma technology. Final report

International Nuclear Information System (INIS)

Sabri, Z.A.

1976-06-01

This report presents principal findings of studies conducted at Iowa State on Applications of Fusion Plasma Technology. Two tasks were considered. The first was to identify and investigate plasma processes for near term industrial applications of already developed plasma technology. The second was to explore the potential of reprocessing the fuel for fusion test facilities in a closed-cycle system. For the first task, two applications were considered. One was alumina reduction in magnetically confined plasmas, and the other was uranium enrichment using plasma centrifuges. For the second task, in-core and ex-core plasma purification were considered. Separation techniques that are compatible with the plasma state were identified and preliminary analysis of their effectiveness were carried out. The effects of differential ionization of impurities on the separation effectiveness are considered. Possible technical difficulties in both tasks are identified and recommendations for future work are given
75 FR 27121 - Interim Final Rules for Group Health Plans and Health Insurance Issuers Relating to Dependent...

Science.gov (United States)

2010-05-13

... 45 CFR Parts 144, 146, and 147 Group Health Plans and Health Insurance Issuers Relating to Dependent... 144, 146, and 147 RIN 0991-AB66 Interim Final Rules for Group Health Plans and Health Insurance... requirements for group health plans and health insurance issuers in the group and individual markets under...
Commercial grade item (CGI) dedication of generators for nuclear safety related applications

International Nuclear Information System (INIS)

Das, R.K.; Hajos, L.G.

1993-01-01

The number of nuclear safety related equipment suppliers and the availability of spare and replacement parts designed specifically for nuclear safety related application are shrinking rapidly. These have made it necessary for utilities to apply commercial grade spare and replacement parts in nuclear safety related applications after implementing proper acceptance and dedication process to verify that such items conform with the requirements of their use in nuclear safety related application. The general guidelines for the commercial grade item (CGI) acceptance and dedication are provided in US Nuclear Regulatory Commission (NRC) Generic Letters and Electric Power Research Institute (EPRI) Report NP-5652, Guideline for the Utilization of Commercial Grade Items in Nuclear Safety Related Applications. This paper presents an application of these generic guidelines for procurement, acceptance, and dedication of a commercial grade generator for use as a standby generator at Salem Generating Station Units 1 and 2. The paper identifies the critical characteristics of the generator which once verified, will provide reasonable assurance that the generator will perform its intended safety function. The paper also delineates the method of verification of the critical characteristics through tests and provide acceptance criteria for the test results. The methodology presented in this paper may be used as specific guidelines for reliable and cost effective procurement and dedication of commercial grade generators for use as standby generators at nuclear power plants
Status of the TOUGH-FLAC simulator and recent applications related to coupled fluid flow and crustal deformations

Energy Technology Data Exchange (ETDEWEB)

Rutqvist, J.

2010-06-01

This paper presents recent advancement in and applications of TOUGH-FLAC, a simulator for multiphase fluid flow and geomechanics. The TOUGH-FLAC simulator links the TOUGH family multiphase fluid and heat transport codes with the commercial FLAC{sup 3D} geomechanical simulator. The most significant new TOUGH-FLAC development in the past few years is a revised architecture, enabling a more rigorous and tight coupling procedure with improved computational efficiency. The applications presented in this paper are related to modeling of crustal deformations caused by deep underground fluid movements and pressure changes as a result of both industrial activities (the In Salah CO{sub 2} Storage Project and the Geysers Geothermal Field) and natural events (the 1960s Matsushiro Earthquake Swarm). Finally, the paper provides some perspectives on the future of TOUGH-FLAC in light of its applicability to practical problems and the need for high-performance computing capabilities for field-scale problems, such as industrial-scale CO{sub 2} storage and enhanced geothermal systems. It is concluded that despite some limitations to fully adapting a commercial code such as FLAC{sup 3D} for some specialized research and computational needs, TOUGH-FLAC is likely to remain a pragmatic simulation approach, with an increasing number of users in both academia and industry.
Final environmental statement related to the operation of the Teton Uranium ISL Project (Docket No). 40-8781

International Nuclear Information System (INIS)

1983-08-01

This Final Environmental Impact Statement is issued by the US Nuclear Regulatory Commission in response to the request by Teton Exploration Drilling, Inc. for the issuance of an NRC Source and Byproduct Material License authorizing operation of the proposed Teton Project to mine uranium in situ by injecting a carbonate/bicarbonate lixiviant into the ore body. The statement considers: (1) alternative of no licensing action, (2) alternative energy sources, and (3) alternatives if uranium ore is mined and refined on the site. The proposed action is to grant a Source and Byproduct Material License to the applicant subject to the stipulated license condition
A conceptual design of Final Focus Systems for linear colliders

International Nuclear Information System (INIS)

Brown, K.L.

1987-06-01

Linear colliders are a relatively recent development in the evolution of particle accelerators. This report discusses some of the approaches that have been considered for the design of Final Focus Systems to demagnify the beam exiting from a linac to the small size suitable for collisions at the interaction point. The system receiving the most attention is the one adopted for the SLAC Linear Collider. However, the theory and optical techniques discussed should be applicable to the design efforts for future machines
Recent progress in safety-related applications of reactor noise analysis

International Nuclear Information System (INIS)

Hirota, Jitsuya; Shinohara, Yoshikuni; Saito, Keiichi

1982-01-01

Recent progress in safety-related applications of reactor noise analysis is reviewed, mainly referring to various papers presented at the Third Specialists' Meeting on Reactor Noise (SMORN-III) held in Tokyo in 1981. Advances in application of autoregressive model, coherence analysis and pattern recognition technique are significant since SMORN-II in 1977. Development of reactor diagnosis systems based on noise analysis is in progress. Practical experiences in the safety-related applications to power plants are being accumulated. Advances in quantitative monitoring of vibration of internal structures in PWR and diagnosis of core stability and control system characteristics in BWR are notable. Acoustic methods are also improved to detect sodium boiling in LMFBR. The Reactor Noise Analysis Benchmark Test performed by Japan in connection with SMORN-III is successful so that it is possible to proceed to the second stage of the benchmark test. (author)
Application of MARSSIM for Final Status Survey of the Decommissioning Project

International Nuclear Information System (INIS)

Hong, Sang Bum; Lee, Ki Won; Park, Jin Ho; Chung, Un Soo

2011-01-01

The release of a site and building from regulatory control is the final stage of the decommissioning process. The MARSSIM (Multi-Agency Radiation Survey and Site Investigation Manual) provides overall framework for conducting data collection for a final status survey to demonstrate compliance with site closure requirements. The KAERI carried out establishing a final status survey by using the guidance provided in the MARSSIM for of a site and building of the Korea Research Reactor. The release criteria for a site and building were set up based on these results of the site specific release levels which were calculated by using RESRAD and RESRAD-Build codes. The survey design for a site and building was classified by using the survey dataset and potential contamination. The number of samples in each survey unit was calculated by through a statistical test using the collected data from a scoping and characterization survey. The results of the final status survey were satisfied the release criteria based on an evaluation of the measured data.
Resistance and resilience: the final frontier in traumatic stress management.

Science.gov (United States)

Everly, George S; Welzant, Victor; Jacobson, Jodi M

2008-01-01

This paper asserts that the constructs of resistance and resilience represent a domain rich in potential for a wide variety of applications in the field of traumatic stress. Resilience holds great potential for those working in applied settings such as public health planning and preparedness, Employee Assistance Programs (EAPs) and business continuity, as well as transportation, law enforcement, fire suppression, emergency medical services, pre-deployment training for military and other high risk professional groups. Additionally, its application to "the war on terrorism" cannot be denied. Finally, the construct of resilience may have direct applicability to businesses and organizations wherein there is perceived value in preparing a workforce to effectively function under adverse or high stress conditions. The putative value of resistance and resiliency in such applied settings resides in their ability to protect against stress-related behavioral morbidity, as well as counterproductive behavioral reactions. Given its importance, the question arises as to whether resilience is an innate trait or an acquired skill. This paper will report on preliminary data suggesting resiliency may be an attribute that can be acquired through participation in a relatively brief training program.
Direct heat applications of geothermal energy in The Geysers/Clear Lake region. Volume I. Geotechnical assessment, agribusiness applications, socioeconomic assessment, engineering assessment. Final report

Energy Technology Data Exchange (ETDEWEB)

1976-08-01

Discussion is presented under the following section headings: background and some technical characteristics of geothermal resources; geology and geohydrology, geophysics, and, conclusions regarding availability of geothermal energy for nonelectric uses; agricultural assessment of Lake County, site assessment for potential agricultural development, analysis of potential agricultural applications, special application of low cost geothermal energy to algae harvesting, development of an integrated agribusiness, geothermal complex in Lake County, analysis of individual enterprises, and, recommendations for subsequent work; demographic characteristics, economic condition and perspective of Lake County, economic impact of geothermal in Lake County, social and economic factors related to geothermal resource development, socioeconomic impact of nonelectric uses of geothermal energy, and, identification of direct heat applications of geothermal energy for Lake County based on selected interviews; cost estimate procedure, example, justification of procedure, and, typical costs and conclusions; and, recommended prefeasibility and feasibility studies related to construction of facilities for nonelectric applications of geothermal resource utilization. (JGB)
Patient Protection and Affordable Care Act; Exchange functions: standards for Navigators and non-Navigator assistance personnel; consumer assistance tools and programs of an Exchange and certified application counselors. Final rule.

Science.gov (United States)

2013-07-17

This final rule addresses various requirements applicable to Navigators and non-Navigator assistance personnel in Federally-facilitated Exchanges, including State Partnership Exchanges, and to non-Navigator assistance personnel in State Exchanges that are funded through federal Exchange Establishment grants. It finalizes the requirement that Exchanges must have a certified application counselor program. It creates conflict-of-interest, training and certification, and meaningful access standards; clarifies that any licensing, certification, or other standards prescribed by a state or Exchange must not prevent application of the provisions of title I of the Affordable Care Act; adds entities with relationships to issuers of stop loss insurance to the list of entities that are ineligible to become Navigators; and clarifies that the same ineligibility criteria that apply to Navigators apply to certain non-Navigator assistance personnel. The final rule also directs that each Exchange designate organizations which will then certify their staff members and volunteers to be application counselors that assist consumers and facilitate enrollment in qualified health plans and insurance affordability programs, and provides standards for that designation.
Applications of geographic information systems (GIS) data and methods in obesity-related research.

Science.gov (United States)

Jia, P; Cheng, X; Xue, H; Wang, Y

2017-04-01

Geographic information systems (GIS) data/methods offer good promise for public health programs including obesity-related research. This study systematically examined their applications and identified gaps and limitations in current obesity-related research. A systematic search of PubMed for studies published before 20 May 2016, utilizing synonyms for GIS in combination with synonyms for obesity as search terms, identified 121 studies that met our inclusion criteria. We found primary applications of GIS data/methods in obesity-related research included (i) visualization of spatial distribution of obesity and obesity-related phenomena, and basic obesogenic environmental features, and (ii) construction of advanced obesogenic environmental indicators. We found high spatial heterogeneity in obesity prevalence/risk and obesogenic environmental factors. Also, study design and characteristics varied considerably across studies because of lack of established guidance and protocols in the field, which may also have contributed to the mixed findings about environmental impacts on obesity. Existing findings regarding built environment are more robust than those regarding food environment. Applications of GIS data/methods in obesity research are still limited, and related research faces many challenges. More and better GIS data and more friendly analysis methods are needed to expand future GIS applications in obesity-related research. © 2017 World Obesity Federation.
Applications of Jarzynski's relation in lattice gauge theories

DEFF Research Database (Denmark)

Nada, Alessandro; Caselle, Michele; Costagliola, Gianluca

2016-01-01

Jarzynski's equality is a well-known result in statistical mechanics, relating free-energy differences between equilibrium ensembles with fluctuations in the work performed during non-equilibrium transformations from one ensemble to the other. In this work, an extension of this relation to lattice...... gauge theory will be presented, along with numerical results for the ℤ2 gauge model in three dimensions and for the equation of state in SU(2) Yang-Mills theory in four dimensions. Then, further applications will be discussed, in particular for the Schrödinger functional and for the study of QCD...
Q-Neutrosophic Soft Relation and Its Application in Decision Making

Directory of Open Access Journals (Sweden)

Majdoleen Abu Qamar

2018-03-01

Full Text Available Q-neutrosophic soft sets are essentially neutrosophic soft sets characterized by three independent two-dimensional membership functions which stand for uncertainty, indeterminacy and falsity. Thus, it can be applied to two-dimensional imprecise, indeterminate and inconsistent data which appear in most real life problems. Relations are a suitable tool for describing correspondences between objects. In this study we introduce and discuss Q-neutrosophic soft relations, which can be discussed as a generalization of fuzzy soft relations, intuitionistic fuzzy soft relations, and neutrosophic soft relations. Q-neutrosophic soft relation is a sub Q-neutrosophic soft set of the Cartesian product of the Q-neutrosophic soft sets, in other words Q-neutrosophic soft relation is Q-neutrosophic soft sets in a Cartesian product of universes. We also present the notions of inverse, composition of Q-neutrosophic soft relations and functions along with some related theorems and properties. Reflexivity, symmetry, transitivity as well as equivalence relations and equivalence classes of Q-neutrosophic soft relations are also defined. Some properties of these concepts are presented and supported by real life examples. Finally, an algorithm to solve decision making problems using Q-neutrosophic soft relations is developed and verified by an example to show the efficiency of this method.
Statistical Validation of a Web-Based GIS Application and Its Applicability to Cardiovascular-Related Studies

Directory of Open Access Journals (Sweden)

Jae Eun Lee

2015-12-01

Full Text Available Purpose: There is abundant evidence that neighborhood characteristics are significantly linked to the health of the inhabitants of a given space within a given time frame. This study is to statistically validate a web-based GIS application designed to support cardiovascular-related research developed by the NIH funded Research Centers in Minority Institutions (RCMI Translational Research Network (RTRN Data Coordinating Center (DCC and discuss its applicability to cardiovascular studies. Methods: Geo-referencing, geocoding and geospatial analyses were conducted for 500 randomly selected home addresses in a U.S. southeastern Metropolitan area. The correlation coefficient, factor analysis and Cronbach’s alpha (α were estimated to quantify measures of the internal consistency, reliability and construct/criterion/discriminant validity of the cardiovascular-related geospatial variables (walk score, number of hospitals, fast food restaurants, parks and sidewalks. Results: Cronbach’s α for CVD GEOSPATIAL variables was 95.5%, implying successful internal consistency. Walk scores were significantly correlated with number of hospitals (r = 0.715; p < 0.0001, fast food restaurants (r = 0.729; p < 0.0001, parks (r = 0.773; p < 0.0001 and sidewalks (r = 0.648; p < 0.0001 within a mile from homes. It was also significantly associated with diversity index (r = 0.138, p = 0.0023, median household incomes (r = −0.181; p < 0.0001, and owner occupied rates (r = −0.440; p < 0.0001. However, its non-significant correlation was found with median age, vulnerability, unemployment rate, labor force, and population growth rate. Conclusion: Our data demonstrates that geospatial data generated by the web-based application were internally consistent and demonstrated satisfactory validity. Therefore, the GIS application may be useful to apply to cardiovascular-related studies aimed to investigate potential impact of geospatial factors on diseases and/or the long
Spent fuel management strategies in eight countries and applicability to Sweden. Final report

International Nuclear Information System (INIS)

1986-01-01

International Energy Associates Limited (IEAL) undertook this study on behalf of Sweden's National Board for Spent Nuclear Fuel (SKN) from June to October 1986. The purpose of the project was to compare the programs and regulations for the management of spent fuel from nuclear power plants and disposal of high-level radioactive waste in eight countries: Belgium, Canada, the Federal Republic of Germany, France, Japan, Switzerland, the United Kingdom and the United States. This final report includes revisions requested by SKN upon review of the draft report dated in September 26, 1986. The study is presented in three volumes. Volume I (Section 2.0 of the report) consists of detailed country-specific reports on the policies, regulations and strategies for spent fuel and high-level waste management in each of the eight countries. The information contained in these country-specific reports was used as the basis for comparing the options in each country in terms of cost, environmental impact, and public acceptability, and for comparing the policies and regulatory requirements affecting these activities in each country. These comparisons are provided in Volume II (Section 3.0 of the report). Section 3.0 also includes a discussion of the applicability to Sweden of the strategies and policies in the eight countries studied. Finally, Volume III of the report (Section 4.0) presents the laws, regulations and other documents pertinent to spent fuel and high-level waste management in these countries. Descriptive summaries of the documents are provided in Section 4.0, a comparison guide to the documents themselves (the great majority of them in English) which are provided in 15 volumes of appendices
An MBASIC application program for relational inquiries on a data base

Science.gov (United States)

Smith, R. M.

1976-01-01

An MBASIC application program is described that allows a user to specify and use a sequence of relational operations on a relational data base for the purpose of making an inquiry or for the purpose of transferring data to a new file.
[The Utilization of Health-Related Applications in Chronic Disease Self-Management].

Science.gov (United States)

Kao, Chi-Wen; Chuang, Hui-Wan; Chen, Ting-Yu

2017-08-01

The dramatic increase in smartphone usage has spurred the development of many health-related mobile applications (apps). On the other hand, population aging and the associated rise in the incidence of chronic disease is increasing the demand for long-term care. Effective chronic disease self-management has been shown to help patients improve their health condition. Numerous smartphone applications currently support patient self-management of chronic disease, facilitating health management and health promotion. The purpose of the present article was to introduce the definition, contents, and types of health-related apps; to discuss the effectiveness of self-management health-related apps in promoting chronic disease management; and to assess and evaluate these apps. We hope that the present article helps give to healthcare professionals and patients who are willing to manage their diseases a general understanding of health-related apps and their potential to facilitate the self-management of chronic diseases.

Development of an image processing system at the Technology Applications Center, UNM: Landsat image processing in mineral exploration and related activities. Final report

International Nuclear Information System (INIS)

Budge, T.K.

1980-09-01

This project was a demonstration of the capabilities of Landsat satellite image processing applied to the monitoring of mining activity in New Mexico. Study areas included the Navajo coal surface mine, the Jackpile uranium surface mine, and the potash mining district near Carlsbad, New Mexico. Computer classifications of a number of land use categories in these mines were presented and discussed. A literature review of a number of case studies concerning the use of Landsat image processing in mineral exploration and related activities was prepared. Included in this review is a discussion of the Landsat satellite system and the basics of computer image processing. Topics such as destriping, contrast stretches, atmospheric corrections, ratioing, and classification techniques are addressed. Summaries of the STANSORT II and ELAS software packages and the Technology Application Center's Digital Image Processing System (TDIPS) are presented
The program ORTOCARTAN for applications in the relativity theory

International Nuclear Information System (INIS)

Krasinski, A.

1985-01-01

A general outline of the program ORTOCARTAN for algebraic computing in the relativity theory is presented. A short history of the program is given. The base-programming language is LISP. The details of the calculation are presented. An example of application of the ORTOCARTAN is given
Artificial intelligence applications in logistics information systems : final report

Science.gov (United States)

1990-04-01

This report is the principal deliverable from the LIMSS-AI project. It summarizes the results of a survey of existing applications and discusses the feasibility and benefits of specific candidate logistics applications.
Asymptotic Expansions - Methods and Applications

International Nuclear Information System (INIS)

Harlander, R.

1999-01-01

Different viewpoints on the asymptotic expansion of Feynman diagrams are reviewed. The relations between the field theoretic and diagrammatic approaches are sketched. The focus is on problems with large masses or large external momenta. Several recent applications also for other limiting cases are touched upon. Finally, the pros and cons of the different approaches are briefly discussed. (author)
NREL Topic 1 Final Report: Cohesive Application of Standards-Based Connected Devices to Enable Clean Energy Technologies

Energy Technology Data Exchange (ETDEWEB)

Hudgins, Andrew P. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sparn, Bethany F. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jin, Xin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Seal, Brian [Electric Power Research Inst. (EPRI), Palo Alto, CA (United States)

2018-02-21

This document is the final report of a two-year development, test, and demonstration project entitled 'Cohesive Application of Standards-Based Connected Devices to Enable Clean Energy Technologies.' The project was part of the National Renewable Energy Laboratory's (NREL) Integrated Network Test-bed for Energy Grid Research and Technology (INTEGRATE) initiative. The Electric Power Research Institute (EPRI) and a team of partners were selected by NREL to carry out a project to develop and test how smart, connected consumer devices can act to enable the use of more clean energy technologies on the electric power grid. The project team includes a set of leading companies that produce key products in relation to achieving this vision: thermostats, water heaters, pool pumps, solar inverters, electric vehicle supply equipment, and battery storage systems. A key requirement of the project was open access at the device level - a feature seen as foundational to achieving a future of widespread distributed generation and storage. The internal intelligence, standard functionality and communication interfaces utilized in this project result in the ability to integrate devices at any level, to work collectively at the level of the home/business, microgrid, community, distribution circuit or other. Collectively, the set of products serve as a platform on which a wide range of control strategies may be developed and deployed.
Synthesis, toxicity, biocompatibility, and biomedical applications of graphene and graphene-related materials

Directory of Open Access Journals (Sweden)

Gurunathan S

2016-05-01

Full Text Available Sangiliyandi Gurunathan, Jin-Hoi Kim Stem Cell and Regenerative Biology, Konkuk University, Seoul, Republic of Korea Abstract: Graphene is a two-dimensional atomic crystal, and since its development it has been applied in many novel ways in both research and industry. Graphene possesses unique properties, and it has been used in many applications including sensors, batteries, fuel cells, supercapacitors, transistors, components of high-strength machinery, and display screens in mobile devices. In the past decade, the biomedical applications of graphene have attracted much interest. Graphene has been reported to have antibacterial, antiplatelet, and anticancer activities. Several salient features of graphene make it a potential candidate for biological and biomedical applications. The synthesis, toxicity, biocompatibility, and biomedical applications of graphene are fundamental issues that require thorough investigation in any kind of applications related to human welfare. Therefore, this review addresses the various methods available for the synthesis of graphene, with special reference to biological synthesis, and highlights the biological applications of graphene with a focus on cancer therapy, drug delivery, bio-imaging, and tissue engineering, together with a brief discussion of the challenges and future perspectives of graphene. We hope to provide a comprehensive review of the latest progress in research on graphene, from synthesis to applications. Keywords: biomedical applications, cancer therapy, drug delivery, graphene, graphene-related materials, tissue engineering, toxicity
Engineering applications using CAD based application programming interface

Directory of Open Access Journals (Sweden)

Tzotzis Anastasios

2017-01-01

Full Text Available Automating the design process of a product or a system can provide engineers and designers with many benefits. As such, repeatable tasks that are time consuming can be handled automatically and with minimal human attention. This is achieved by using the API (Application Programmable Interface of CAD systems in order to create macros or even develop software applications. The present paper deals with an application that has been developed with the API of a general purposes CAD system. This application automates the design process of a standard pneumatic double acting cylinder based on the appropriate inserted parameters (ISO 15552.The design process begins with the creation of a series of components developed as solids, and extends to the extraction of basic attributes and properties from the complete mechanical assembly. Finally, the assembled models and the extracted data can be used to further study the design of the pneumatic double acting cylinder. It is expected in the future to expand the features of the presented application in order to automate the design process of other related mechanical systems.
Final focus systems for linear colliders

International Nuclear Information System (INIS)

Erickson, R.A.

1987-11-01

The final focus system of a linear collider must perform two primary functions, it must focus the two opposing beams so that their transverse dimensions at the interaction point are small enough to yield acceptable luminosity, and it must steer the beams together to maintain collisions. In addition, the final focus system must transport the outgoing beams to a location where they can be recycled or safely dumped. Elementary optical considerations for linear collider final focus systems are discussed, followed by chromatic aberrations. The design of the final focus system of the SLAC Linear Collider (SLC) is described. Tuning and diagnostics and steering to collision are discussed. Most of the examples illustrating the concepts covered are drawn from the SLC, but the principles and conclusions are said to be generally applicable to other linear collider designs as well. 26 refs., 17 figs
Self-management support by final year nursing students: A correlational study of performance and person-related associated factors.

Science.gov (United States)

Duprez, Veerle; Beeckman, Dimitri; Verhaeghe, Sofie; Van Hecke, Ann

2017-09-01

Chronic conditions put a heavy burden on healthcare in every country. Supporting persons with a chronic illness to take an active role in the management of their condition is a core component in the Chronic Care Model. It implies confidence and good skills from professionals. To date, there is no evidence on final year nursing students' performance in supporting patients' self-management, nor on factors associated with this performance. To explore self-reported performance of supporting patients' self-management by final year nursing students, and person-related factors associated with this performance. A correlational multi-centre study of final year nursing students (N=256) from eight nursing schools. Students were recruited from a convenience sample of eight nursing schools. All final year students were invited to participate. Data were collected between January 2015 and May 2016 using self-administered validated questionnaires. Theoretical behavioural frameworks were used to select hypothesized associated factors for self-management support: self-efficacy to perform self-management support and socio-structural factors (Social Cognitive Theory); needs for autonomy, competence and relatedness, and patient-invested contingent self-esteem (Self-Determination Theory); and attitudes towards supporting patients' self-management (Theory of Planned Behaviour). Final year nursing students (N=256) reported an overall low level of performance in delivering self-management support during internship. Students lacked mainly competencies in collaborative goal setting and shared decision making. Students reported a significant gap between their confidence and their actual performance in self-management support (pLearning opportunities can be introduced in classroom activities and on internship. Copyright © 2017 Elsevier Ltd. All rights reserved.
Scanning tunneling microscopy II further applications and related scanning techniques

CERN Document Server

Güntherodt, Hans-Joachim

1992-01-01

Scanning Tunneling Microscopy II, like its predecessor, presents detailed and comprehensive accounts of the basic principles and broad range of applications of STM and related scanning probe techniques. The applications discussed in this volume come predominantly from the fields of electrochemistry and biology. In contrast to those described in Vol. I, these sudies may be performed in air and in liquids. The extensions of the basic technique to map other interactions are described inchapters on scanning force microscopy, magnetic force microscopy, scanning near-field optical microscopy, together with a survey of other related techniques. Also described here is the use of a scanning proximal probe for surface modification. Togehter, the two volumes give a comprehensive account of experimental aspcets of STM. They provide essentialreading and reference material for all students and researchers involvedin this field.
Applications of Desensitization Procedures for School-Related Problems; A Review.

Science.gov (United States)

Prout, H. Thompson; Harvey, John R.

1978-01-01

A variety of desensitization and counterconditioning procedures have been utilized to deal with school-related problems. These procedures are reviewed with respect to applications for treating school phobia, test anxiety, and other academic anxieties. (Author)
Solair heater program: solair applications study. Final report

Energy Technology Data Exchange (ETDEWEB)

1977-12-01

General Electric has designed and tested a low-cost solar system using a vacuum tube solar air heater under ERDA Contract E(11-1)-2705. This contract extension has been provided to evaluate various applications of this solar collector. The evaluation identified attractive applications, evaluated corresponding control procedures, estimated system performance, compared economically insolation and insulation, and evaluated the repackaging of off-the-shelf equipment for improved cost effectiveness. The results of this study prompted General Electric's marketing group to do a detailed commercialization study of a residential domestic water heating system using the Solair concept which has been selected as the most attractive application. Other attractive applications are space/domestic water heating and a heat pump assisted solar system/domestic water heating where the heat pump and the solar system function in parallel. A prime advantage of heated air solar systems over liquid systems is cost and longer life which results in higher BTU's/dollar. Other air system advantages are no liquid leakage problems, no toxicity of freezing problems, and less complicated equipment. A hybrid solar system has been identified that can improve the market penetration of solar energy. This system would use the existing mass of the house for energy storage thereby reducing solar cost and complexity. Adequate performance can be obtained with house temperature swings comparable to those used in nighttime setback of the thermostat. Details of this system are provided.
Fourier transform infrared spectra applications to chemical systems

CERN Document Server

Ferraro, John R

1978-01-01

Fourier Transform Infrared Spectroscopy: Applications to Chemical Systems presents the chemical applications of the Fourier transform interferometry (FT-IR).The book contains discussions on the applications of FT-IR in the fields of chromatography FT-IR, polymers and biological macromolecules, emission spectroscopy, matrix isolation, high-pressure interferometry, and far infrared interferometry. The final chapter is devoted to the presentation of the use of FT-IR in solving national technical problems such as air pollution, space exploration, and energy related subjects.Researc
Plan for advanced microelectronics processing technology application. Final report

Energy Technology Data Exchange (ETDEWEB)

Goland, A.N.

1990-10-01

The ultimate objective of the tasks described in the research agreement was to identify resources primarily, but not exclusively, within New York State that are available for the development of a Center for Advanced Microelectronics Processing (CAMP). Identification of those resources would enable Brookhaven National Laboratory to prepare a program plan for the CAMP. In order to achieve the stated goal, the principal investigators undertook to meet the key personnel in relevant NYS industrial and academic organizations to discuss the potential for economic development that could accompany such a Center and to gauge the extent of participation that could be expected from each interested party. Integrated of these discussions was to be achieved through a workshop convened in the summer of 1990. The culmination of this workshop was to be a report (the final report) outlining a plan for implementing a Center in the state. As events unfolded, it became possible to identify the elements of a major center for x-ray lithography on Lone Island at Brookhaven National Laboratory. The principal investigators were than advised to substitute a working document based upon that concept in place of a report based upon the more general CAMP workshop originally envisioned. Following that suggestion from the New York State Science and Technology Foundation, the principals established a working group consisting of representatives of the Grumman Corporation, Columbia University, the State University of New York at Stony Brook, and Brookhaven National Laboratory. Regular meetings and additional communications between these collaborators have produced a preproposal that constitutes the main body of the final report required by the contract. Other components of this final report include the interim report and a brief description of the activities which followed the establishment of the X-ray Lithography Center working group.
Testing high brightness LEDs relative to application environment

Science.gov (United States)

Singer, Jeffrey; Mangum, Scott; Lundberg, John

2006-08-01

Application of light emitting diodes is expanding as the luminous output and efficiencies of these devices improve. At the same time, the number of LED package types is increasing, making it challenging to determine the appropriate device for use in lighting product designs. A range of factors should be considered when selecting a LED for an application including color coordinates, luminous efficacy, cost, lumen maintenance, application life, packaging and manufacturability. Additional complexities can be introduced as LED packages become obsolete and replacement parts must be selected. The replacement LED characteristics must be understood and assessed against the parameters of the original device, in order to determine if the change will be relatively simple or will force other end-product changes. While some characteristics are readily measured and compared, other factors, such as lumen maintenance, are difficult to verify. This paper will discuss the characteristics of a LED that should be considered during the design process as well as methods to validate these characteristics, particularly those which are not typically on data sheets or, are critical to the design and warrant additional validation. Particular attention will be given to LED lumen maintenance. While published manufacturer data typically provides temperature versus performance curves, the data may not be useful depending upon the application's operating environment. Models must be created to estimate the LED's junction temperature and degradation curve at the applied temperature in order to develop a more precise life estimate. This paper presents one approach to a LED device life and performance study designed with application environments in mind.
Scaling Green-Kubo Relation and Application to Three Aging Systems

Directory of Open Access Journals (Sweden)

A. Dechant

2014-02-01

Full Text Available The Green-Kubo formula relates the spatial diffusion coefficient to the stationary velocity autocorrelation function. We derive a generalization of the Green-Kubo formula that is valid for systems with long-range or nonstationary correlations for which the standard approach is no longer valid. For the systems under consideration, the velocity autocorrelation function ⟨v(t+τv(t⟩ asymptotically exhibits a certain scaling behavior and the diffusion is anomalous, ⟨x^{2}(t⟩≃2D_{ν}t^{ν}. We show how both the anomalous diffusion coefficient D_{ν} and the exponent ν can be extracted from this scaling form. Our scaling Green-Kubo relation thus extends an important relation between transport properties and correlation functions to generic systems with scale-invariant dynamics. This includes stationary systems with slowly decaying power-law correlations, as well as aging systems, systems whose properties depend on the age of the system. Even for systems that are stationary in the long-time limit, we find that the long-time diffusive behavior can strongly depend on the initial preparation of the system. In these cases, the diffusivity D_{ν} is not unique, and we determine its values, respectively, for a stationary or nonstationary initial state. We discuss three applications of the scaling Green-Kubo relation: free diffusion with nonlinear friction corresponding to cold atoms diffusing in optical lattices, the fractional Langevin equation with external noise recently suggested to model active transport in cells, and the Lévy walk with numerous applications, in particular, blinking quantum dots. These examples underline the wide applicability of our approach, which is able to treat very different mechanisms of anomalous diffusion.
76 FR 65746 - Notice of Availability of Joint Final Environmental Impact Statement/Final Environmental Impact...

Science.gov (United States)

2011-10-24

...In accordance with the National Environmental Policy Act of 1969, as amended (NEPA), and the Federal Land Policy and Management Act of 1976, as amended (FLPMA), the Bureau of Land Management (BLM) and the California Public Utilities Commission (CPUC) have prepared a Final Environmental Impact Statement (EIS) and Final Environmental Impact Report (EIR) as a joint environmental analysis document for Tule Wind, LLC's Tule Wind Project (Tule Project) and the San Diego Gas and Electric's (SDG&E) East County Substation Project (ECO Project) and by this notice are announcing the availability of the Final EIS/EIR. By this Notice the BLM is also segregating the public lands within the Tule Project application area from appropriation under the public land laws including the Mining Law, but not the Mineral Leasing or Material Sales Act, for a period of 2 years.
Final safety evaluation report related to the certification of the Advanced Boiling Water Reactor design. Supplement 1

International Nuclear Information System (INIS)

1997-05-01

This report supplements the final safety evaluation report (FSER) for the US Advanced Boiling Water Reactor (ABWR) standard design. The FSER was issued by the US Nuclear Regulatory Commission (NRC) staff as NUREG-1503 in July 1994 to document the NRC staff's review of the US ABWR design. The US ABWR design was submitted by GE Nuclear Energy (GE) in accordance with the procedures of Subpart B to Part 52 of Title 10 of the Code of Federal Regulations. This supplement documents the NRC staff's review of the changes to the US ABWR design documentation since the issuance of the FSER. GE made these changes primarily as a result of first-of-a-kind-engineering (FOAKE) and as a result of the design certification rulemaking for the ABWR design. On the basis of its evaluations, the NRC staff concludes that the confirmatory issues in NUREG-1503 are resolved, that the changes to the ABWR design documentation are acceptable, and that GE's application for design certification meets the requirements of Subpart B to 10 CFR Part 52 that are applicable and technically relevant to the US ABWR design
Final safety evaluation report related to the certification of the Advanced Boiling Water Reactor design. Supplement 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-05-01

This report supplements the final safety evaluation report (FSER) for the US Advanced Boiling Water Reactor (ABWR) standard design. The FSER was issued by the US Nuclear Regulatory Commission (NRC) staff as NUREG-1503 in July 1994 to document the NRC staff`s review of the US ABWR design. The US ABWR design was submitted by GE Nuclear Energy (GE) in accordance with the procedures of Subpart B to Part 52 of Title 10 of the Code of Federal Regulations. This supplement documents the NRC staff`s review of the changes to the US ABWR design documentation since the issuance of the FSER. GE made these changes primarily as a result of first-of-a-kind-engineering (FOAKE) and as a result of the design certification rulemaking for the ABWR design. On the basis of its evaluations, the NRC staff concludes that the confirmatory issues in NUREG-1503 are resolved, that the changes to the ABWR design documentation are acceptable, and that GE`s application for design certification meets the requirements of Subpart B to 10 CFR Part 52 that are applicable and technically relevant to the US ABWR design.
26 CFR 26.2642-5 - Finality of inclusion ratio.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 14 2010-04-01 2010-04-01 false Finality of inclusion ratio. 26.2642-5 Section...-5 Finality of inclusion ratio. (a) Direct skips. The inclusion ratio applicable to a direct skip...) Other GSTs. With respect to taxable distributions and taxable terminations, the inclusion ratio for a...

On the validity and practical applicability of derivative analyticity relations

International Nuclear Information System (INIS)

Kolar, P.; Fischer, J.

1983-09-01

We examine derivative analyticity relations (DAR), which were originally proposed by Bronzan as an alternative to dispersion relations and in which the dispersion integral is replaced by a tangent series of derivatives. We characterize the class of functions satisfying DAR, and show that outside this class the dispersion integral represents a Borel-like sum of tangent series. We point out difficulties connected with the application of DAR. (author)
Three applications of a bonus relation for gravity amplitudes

International Nuclear Information System (INIS)

Spradlin, Marcus; Volovich, Anastasia; Wen, Congkao

2009-01-01

Arkani-Hamed et al. have recently shown that all tree-level scattering amplitudes in maximal supergravity exhibit exceptionally soft behavior when two supermomenta are taken to infinity in a particular complex direction, and that this behavior implies new non-trivial relations amongst amplitudes in addition to the well-known on-shell recursion relations. We consider the application of these new 'bonus relations' to MHV amplitudes, showing that they can be used quite generally to relate (n-2)!-term formulas typically obtained from recursion relations to (n-3)!-term formulas related to the original BGK conjecture. Specifically we provide (1) a direct proof of a formula presented by Elvang and Freedman, (2) a new formula based on one due to Bedford et al., and (3) an alternate proof of a formula recently obtained by Mason and Skinner. Our results also provide the first direct proof that the conjectured BGK formula, only very recently proven via completely different methods, satisfies the on-shell recursion.
Final safety evaluation report related to the certification of the System 80+ design: Docket Number 52-002. Supplement 1

International Nuclear Information System (INIS)

1997-05-01

This report supplements the final safety evaluation report (FSER) for the System 80+ standard design. The FSER was issued by the US Nuclear Regulatory Commission (NRC) staff as NUREG-1462 in August 1994 to document the NRC staff's review of the System 80+ design. The System 80+ design was submitted by Asea Brown Boveri-Combustion Engineering (ABB-CE), in accordance with the procedures of Subpart B to Part 52 of Title 10 of the Code of Federal Regulations. This supplement documents the NRC staff's review of the changes to the System 80+ design documentation since the issuance of the FSER. ABB-CE made these changes as a result of its review of the System 80+ design details. The NRC staff concludes that the changes to the System 80+ design documentation are acceptable, and that ABB-CE's application for design certification meets the requirements of Subpart B to 10 CFR Part 52 that are applicable and technically relevant to the System 80+ design
Assessment of research needs for advanced heterogeneous catalysts for energy applications. Final report: Volume 1, Executive summary

Energy Technology Data Exchange (ETDEWEB)

Mills, G.A.

1994-04-01

This report assesses the direction, technical content, and priority of research needs judged to provide the best chance of yielding new and improved heterogeneous catalysts for energy-related applications over a period of 5--20 years. It addresses issues of energy conservation, alternate fuels and feedstocks, and the economics and applications that could alleviate pollution from energy processes. Recommended goals are defined in 3 major, closely linked research thrusts: catalytic science, environmental protection by catalysis, and industrial catalytic applications. This volume provides a comprehensive executive summary, including research recommendations.
Final report of the tritium issues working group. Vol. 2

International Nuclear Information System (INIS)

Spratt, Peter; Hardy, David; Peirce, Denny; Smith, Ron; Wyatt, Alan.

1985-09-01

This report consists of a series of appendices relating to the sociological and technical considerations of tritium and its related technology. It is intended as a supplement to Volume 1 of the Final Report of the Tritium Issues Working Group. The work will the cover the following specific areas: A) Development of an ethical framework related to technology, morality, weapons, politics, etc. B) Review the history of nuclear power in Canada, placement of this technology in context with other technologies, waste products and the CANDU reactor system. C) Assessment of tritium as a unique product, as a class of isotopes, waste by-product and physical properties, effects on human life and its place in the natural environment. D) Assessment of tritium and the environment, diffusion through commerical application, European and American experience, waste management and recycling. E) Assessment of commercial applications, including current experience, historical applications for commercial purposes, offshore revenue for Canada value-added component and role of Ontario Hydro. F) Assessment of tritium and weapons, including technology and the military, past and future role of tritium in weapons, proliferation theories, generic conclusions regarding linkages, dependence of Americans on foreign sources of strategic resources. G) Review of regulations in effect now with respect to nuclear and/or other products with potential to military application, and what is needed. H) Review of traditional Canadian postures in the area of technology perception and political culture, the role, mandate and responsibility of Ontario Hydro, growth of international economy, Canada's competitive position in this economy and the challenges and dilemmas that modern decision makers have in a highly interrelated technological world
Applications in soil-structure interactions. Final report, June 1979

International Nuclear Information System (INIS)

Jhaveri, D.P.

1979-01-01

Complex phenomenon of soil-structure interaction was assessed. Relationships between the characteristics of the earthquake ground motions, the local soil and geologic conditions, and the response of the structures to the ground motions were studied. (I) The use of the explicit finite-difference method to study linear elastic soil-structure interaction is described. A linear two-dimensional study of different conditions that influence the dynamic compliance and scattering properties of foundations is presented. (II) The FLUSH computer code was used to compute the soil-structure interaction during SIMQUAKE 1B, an experimental underground blast excitation of a 1/12-scale model of a nuclear containment structure. Evaluation was performed using transient excitation, applied to a finite-difference grid. Dynamic foundation properties were studied. Results indicate that the orientation and location of the source relative to the site and the wave environment at the site may be important parameters to be considered. Differences between the computed and experimental recorded responses are indicated, and reasons for the discrepancy are suggested. (III) A case study that examined structural and ground response data tabulated and catalogued from tests at the Nevada Test Site for its applicability to the soil-structure interaction questions of interest is presented. Description, methods, and evaluation of data on soil-structure interaction from forced vibration tests are presented. A two-dimensional finite-difference grid representing a relatively rigid structure resting on uniform ground was analyzed and monitored. Fourier spectra of monitored time histories were also evaluated and are presented. Results show clear evidence of soil-structure interaction and significant agreement with theory. 128 figures, 18 tables
The testing effect for mediator final test cues and related final test cues in online and laboratory experiments

NARCIS (Netherlands)

L.C. Coppens; P.P.J.L. Verkoeijen; S. Bouwmeester; R.M.J.P. Rikers

2016-01-01

Background The testing effect is the finding that information that is retrieved during learning is more often correctly retrieved on a final test than information that is restudied. According to the semantic mediator hypothesis the testing effect arises because retrieval practice of cue-target
The testing effect for mediator final test cues and related final test cues in online and laboratory experiments

NARCIS (Netherlands)

Coppens, Leonora C.; Verkoeijen, Peter P. J. L.; Bouwmeester, Samantha; Rikers, Remy M. J. P.

2016-01-01

Background The testing effect is the finding that information that is retrieved during learning is more often correctly retrieved on a final test than information that is restudied. According to the semantic mediator hypothesis the testing effect arises because retrieval practice of cue-target pairs
Superhard nanophase cutter materials for rock drilling applications; FINAL

International Nuclear Information System (INIS)

Voronov, O.; Tompa, G.; Sadangi, R.; Kear, B.; Wilson, C.; Yan, P.

2000-01-01

The Low Pressure-High Temperature (LPHT) System has been developed for sintering of nanophase cutter and anvil materials. Microstructured and nanostructured cutters were sintered and studied for rock drilling applications. The WC/Co anvils were sintered and used for development of High Pressure-High Temperature (HPHT) Systems. Binderless diamond and superhard nanophase cutter materials were manufactured with help of HPHT Systems. The diamond materials were studied for rock machining and drilling applications. Binderless Polycrystalline Diamonds (BPCD) have high thermal stability and can be used in geothermal drilling of hard rock formations. Nanophase Polycrystalline Diamonds (NPCD) are under study in precision machining of optical lenses. Triphasic Diamond/Carbide/Metal Composites (TDCC) will be commercialized in drilling and machining applications
Some economic aspects of the conversion of raw materials into final products

Energy Technology Data Exchange (ETDEWEB)

Pick, H J [Univ. of Aston, Birmingham, Eng.; Becker, P E

1978-01-01

In a previous paper Pick and Becker analyzed the direct and indirect relations between energy and the ''physical structure'' materials used by the engineering and construction industries. The present paper provides a more general description of materials conversion from natural resources to final products. The cost of raw materials, only some 30 percent of which come from the developing countries, accounts for a relatively small proportion of final product costs, the remaining product costs arising from the progressive application of labor, capital, energy, etc. Emphasis is placed on the complete interdependence of the inputs to manufacturing; a change in any one having implications for the remainder. Materials substitution, while in principle providing an adaptive mechanism to change, also has implications for a wide range of factors of production and for social and industrial issues such as regional employment, the demand for specific trades and professions, for research and development and for industrial structure and capital investment. Full allowance for this interdependence needs to be an integral part of effective long term policy formulation and of research and development planning.
Bond Strength of Resin Composite to Dentin with Different Adhesive Systems: Influence of Relative Humidity and Application Time.

Science.gov (United States)

Amsler, Fabienne; Peutzfeldt, Anne; Lussi, Adrian; Flury, Simon

2015-06-01

To investigate the influence of relative humidity and application time on bond strength to dentin of different classes of adhesive systems. A total of 360 extracted human molars were ground to mid-coronal dentin. The dentin specimens were treated with one of six adhesive systems (Syntac Classic, OptiBond FL, Clearfil SE Bond, AdheSE, Xeno Select, or Scotchbond Universal), and resin composite (Filtek Z250) was applied to the treated dentin surface under four experimental conditions (45% relative humidity/application time according to manufacturers' instructions; 45% relative humidity/reduced application time; 85% relative humidity/application time according to manufacturers' instructions; 85% relative humidity/reduced application time). After storage (37°C, 100% humidity, 24 h), shear bond strength (SBS) was measured and data analyzed with nonparametric ANOVA followed by Kruskal-Wallis tests and Mann-Whitney U-tests with Bonferroni-Holm correction for multiple testing (level of significance: α = 0.05). Increased relative humidity and reduced application time had no effect on SBS for Clearfil SE Bond and Scotchbond Universal (p = 1.00). For Syntac Classic, OptiBond FL, AdheSE, and Xeno Select there was no effect on SBS of reduced application time of the adhesive system (p ≥ 0.403). However, increased relative humidity significantly reduced SBS for Syntac Classic, OptiBond FL, and Xeno Select irrespective of application time (p ≤ 0.003), whereas for AdheSE, increased relative humidity significantly reduced SBS at recommended application time only (p = 0.002). Generally, increased relative humidity had a detrimental effect on SBS to dentin, but reduced application time had no effect.
Long-term integrity of waste package final closure for HLW geological disposal, (2). Applicability of TIG welding method to overpack final closure

International Nuclear Information System (INIS)

Asano, Hidekazu; Sawa, Shuusuke; Aritomi, Masanori

2005-01-01

Overpack, a high-level radioactive waste package for geological disposal, seals vitrified waste and in line with Japan's waste management program is required to isolate it from contact with groundwater for 1,000 years. In this study, TIG (Tungsten Inert Gas) welding method, a typical arc welding method and widely used in various industries, was examined for its applicability to seal a carbon steel overpack lid with a thickness of 190 mm. Welding conditions and welding parameters were examined for multi-layer welding in a narrow gap for four different groove depths. Weld joint tests were conducted and weld flaws, macro- and microstructure, and mechanical properties were assessed within tentatively applied criteria for weld joints. Measurement and numerical calculation for residual stress were also conducted and the tendency of residual stress distribution was discussed. These test results were compared with the basic requirements of the welding method for overpack which were pointed out in our first report. It is assessed that the TIG welding method has the potential to provide the necessary requirements to complete the final closure of overpack with a maximum thickness of 190 mm. (author)
DELTA-DIESEL ENGINE LIGHT TRUCK APPLICATION Contract DE-FC05-97OR22606 Final Report

Energy Technology Data Exchange (ETDEWEB)

Hakim, Nabil Balnaves, Mike

2003-05-27

DELTA Diesel Engine Light Truck Application End of Contract Report DE-FC05-97-OR22606 EXECUTIVE SUMMARY This report is the final technical report of the Diesel Engine Light Truck Application (DELTA) program under contract DE-FC05-97-OR22606. During the course of this contract, Detroit Diesel Corporation analyzed, designed, tooled, developed and applied the ''Proof of Concept'' (Generation 0) 4.0L V-6 DELTA engine and designed the successor ''Production Technology Demonstration'' (Generation 1) 4.0L V-6 DELTA engine. The objectives of DELTA Program contract DE-FC05-97-OR22606 were to: Demonstrate production-viable diesel engine technologies, specifically intended for the North American LDT and SUV markets; Demonstrate emissions compliance with significant fuel economy advantages. With a clean sheet design, DDC produced the DELTA engine concept promising the following attributes: 30-50% improved fuel economy; Low cost; Good durability and reliability; Acceptable noise, vibration and harshness (NVH); State-of-the-art features; Even firing, 4 valves per cylinder; High pressure common rail fuel system; Electronically controlled; Turbocharged, intercooled, cooled EGR; Extremely low emissions via CLEAN Combustion{copyright} technology. To demonstrate the engine technology in the SUV market, DDC repowered a 1999 Dodge Durango with the DELTA Generation 0 engine. Fuel economy improvements were approximately 50% better than the gasoline engine replaced in the vehicle.
AIMES Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Katz, Daniel S [Univ. of Illinois, Urbana-Champaign, IL (United States). National Center for Supercomputing Applications (NCSA); Jha, Shantenu [Rutgers Univ., New Brunswick, NJ (United States); Weissman, Jon [Univ. of Minnesota, Minneapolis, MN (United States); Turilli, Matteo [Rutgers Univ., New Brunswick, NJ (United States)

2017-01-31

This is the final technical report for the AIMES project. Many important advances in science and engineering are due to large-scale distributed computing. Notwithstanding this reliance, we are still learning how to design and deploy large-scale production Distributed Computing Infrastructures (DCI). This is evidenced by missing design principles for DCI, and an absence of generally acceptable and usable distributed computing abstractions. The AIMES project was conceived against this backdrop, following on the heels of a comprehensive survey of scientific distributed applications. AIMES laid the foundations to address the tripartite challenge of dynamic resource management, integrating information, and portable and interoperable distributed applications. Four abstractions were defined and implemented: skeleton, resource bundle, pilot, and execution strategy. The four abstractions were implemented into software modules and then aggregated into the AIMES middleware. This middleware successfully integrates information across the application layer (skeletons) and resource layer (Bundles), derives a suitable execution strategy for the given skeleton and enacts its execution by means of pilots on one or more resources, depending on the application requirements, and resource availabilities and capabilities.
Medicare Program; Hospital Inpatient Prospective Payment Systems for Acute Care Hospitals and the Long-Term Care Hospital Prospective Payment System and Policy Changes and Fiscal Year 2017 Rates; Quality Reporting Requirements for Specific Providers; Graduate Medical Education; Hospital Notification Procedures Applicable to Beneficiaries Receiving Observation Services; Technical Changes Relating to Costs to Organizations and Medicare Cost Reports; Finalization of Interim Final Rules With Comment Period on LTCH PPS Payments for Severe Wounds, Modifications of Limitations on Redesignation by the Medicare Geographic Classification Review Board, and Extensions of Payments to MDHs and Low-Volume Hospitals. Final rule.

Science.gov (United States)

2016-08-22

making technical corrections and changes to regulations relating to costs to related organizations and Medicare cost reports; we are providing notice of the closure of three teaching hospitals and the opportunity to apply for available GME resident slots under section 5506 of the Affordable Care Act. We are finalizing the provisions of interim final rules with comment period that relate to a temporary exception for certain wound care discharges from the application of the site neutral payment rate under the LTCH PPS for certain LTCHs; application of two judicial decisions relating to modifications of limitations on redesignation by the Medicare Geographic Classification Review Board; and legislative extensions of the Medicare-dependent, small rural hospital program and changes to the payment adjustment for low-volume hospitals.
Novel catalysts for hydrogen fuel cell applications:Final report (FY03-FY05).

Energy Technology Data Exchange (ETDEWEB)

Thornberg, Steven Michael; Coker, Eric Nicholas; Jarek, Russell L.; Steen, William Arthur

2005-12-01

The goal of this project was to develop novel hydrogen-oxidation electrocatalyst materials that contain reduced platinum content compared to traditional catalysts by developing flexible synthesis techniques to fabricate supported catalyst structures, and by verifying electrochemical performance in half cells and ultimately laboratory fuel cells. Synthesis methods were developed for making small, well-defined platinum clusters using zeolite hosts, ion exchange, and controlled calcination/reduction processes. Several factors influence cluster size, and clusters below 1 nm with narrow size distribution have been prepared. To enable electrochemical application, the zeolite pores were filled with electrically-conductive carbon via infiltration with carbon precursors, polymerization/cross-linking, and pyrolysis under inert conditions. The zeolite host was then removed by acid washing, to leave a Pt/C electrocatalyst possessing quasi-zeolitic porosity and Pt clusters of well-controlled size. Plotting electrochemical activity versus pyrolysis temperature typically produces a Gaussian curve, with a peak at ca. 800 C. The poorer relative performances at low and high temperature are due to low electrical conductivity of the carbon matrix, and loss of zeolitic structure combined with Pt sintering, respectively. Cluster sizes measured via adsorption-based methods were consistently larger than those observed by TEM and EXAFS, suggesting , that a fraction of the clusters were inaccessible to the fluid phase. Detailed EXAFS analysis has been performed on selected catalysts and catalyst precursors to monitor trends in cluster size evolution, as well as oxidation states of Pt. Experiments were conducted to probe the electroactive surface area of the Pt clusters. These Pt/C materials had as much as 110 m{sup 2}/g{sub pt} electroactive surface area, an almost 30% improvement over what is commercially (mfg. by ETEK) available (86 m{sup 2}/g{sub pt}). These Pt/C materials also perform
Scanning tunneling microscopy II further applications and related scanning techniques

CERN Document Server

Güntherodt, Hans-Joachim

1995-01-01

Scanning Tunneling Microscopy II, like its predecessor, presents detailed and comprehensive accounts of the basic principles and broad range of applications of STM and related scanning probe techniques. The applications discussed in this volume come predominantly from the fields of electrochemistry and biology. In contrast to those described in STM I, these studies may be performed in air and in liquids. The extensions of the basic technique to map other interactions are described in chapters on scanning force microscopy, magnetic force microscopy, and scanning near-field optical microscopy, together with a survey of other related techniques. Also described here is the use of a scanning proximal probe for surface modification. Together, the two volumes give a comprehensive account of experimental aspects of STM. They provide essential reading and reference material for all students and researchers involved in this field. In this second edition the text has been updated and new methods are discussed.
Possible applications for municipal solid waste fly ash.

Science.gov (United States)

Ferreira, C; Ribeiro, A; Ottosen, L

2003-01-31

The present study focuses on existing practices related to the reuse of Municipal Solid Waste (MSW) fly ash and identifies new potential uses. Nine possible applications were identified and grouped into four main categories: construction materials (cement, concrete, ceramics, glass and glass-ceramics); geotechnical applications (road pavement, embankments); "agriculture" (soil amendment); and, miscellaneous (sorbent, sludge conditioning). Each application is analysed in detail, including final-product technical characteristics, with a special emphasis on environmental impacts. A comparative analysis of the different options is performed, stressing the advantages but also the weaknesses of each option. This information is systemized in order to provide a framework for the selection of best technology and final products. The results presented here show new possibilities for this waste reuse in a short-term, in a wide range of fields, resulting in great advantages in waste minimization as well as resources conservation.
Application and further development of models for the final repository safety analyses on the clearance of radioactive materials for disposal. Final report; Anwendung und Weiterentwicklung von Modellen fuer Endlagersicherheitsanalysen auf die Freigabe radioaktiver Stoffe zur Deponierung. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Artmann, Andreas; Larue, Juergen; Seher, Holger; Weiss, Dietmar

2014-08-15

The project of application and further development of models for the final repository safety analyses on the clearance of radioactive materials for disposal is aimed to study the long-term safety using repository-specific simulation programs with respect to radiation exposure for different scenarios. It was supposed to investigate whether the 10 micro Sv criterion can be guaranteed under consideration of human intrusion scenarios. The report covers the following issues: selection and identification of models and codes and the definition of boundary conditions; applicability of conventional repository models for long-term safety analyses; modeling results for the pollutant release and transport and calculation of radiation exposure; determination of the radiation exposure.
Application of the final flotation waste for obtaining the glass-ceramic materials

Directory of Open Access Journals (Sweden)

Cocić Mira

2017-01-01

Full Text Available This work describes the investigation of the final flotation waste (FFW, originating from the RTB Bor Company (Serbia, as the main component for the production of glass-ceramic materials. The glass-ceramics was synthesized by the sintering of FFW, mixtures of FFW with basalt (10%, 20%, and 40%, and mixtures of FFW with tuff (20% and 40%. The sintering was conducted at the different temperatures and with the different time duration in order to find the optimal composition and conditions for crystallization. The increase of temperature, from 1100 to 1480°C, and sintering time, from 4 to 6h resulted in a higher content of hematite crystal in the obtained glass-ceramic (up to 44%. The glass-ceramics sintered from pure FFW (1080°C/36h has good mechanical properties, such as high propagation speed (4500 m/s and hardness (10800 MPa, as well as very good thermal stability. The glass-ceramics obtained from mixtures shows weaker mechanical properties compared to that obtained from pure FFW. The mixtures of FFW with tuff have a significantly lower bulk density compared to other obtained glass-ceramics. Our results indicate that FFW can be applied as a basis for obtaining the construction materials. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. 176010: Composition, genesis, application, and contribution to the environmental sustainability

Issues related to the licensing of final disposal facilities for radioactive waste

International Nuclear Information System (INIS)

Medici, M.A.; Alvarez, D.E.; Lee Gonzales, H.; Piumetti, E.H.; Palacios, E.

2010-01-01

The licensing process of a final disposal facility for radioactive waste involves the design, construction, pre-operation, operation, closure and post closure stages. While design and pre-operational stages are, to a reasonable extent, similar to other kind of nuclear or radioactive facilities, construction, operation, closure and post-closure of a radioactive waste disposal facility have unique meanings. As consequence of that, the licensing process should incorporate these particularities. Considering the long timeframes involved at each stage of a waste disposal facility, it is convenient that the development of the project being implemented in and step by step process, be flexible enough as to adapt to new requirements that would arise as a consequence of technology improvements or due to variations in the socio-economical and political conditions. In Argentina, the regulatory Standard AR 0.1.1 establishes the general guideline for the 'Licensing of Class I facilities (relevant facilities)'. Nevertheless, for radioactive waste final disposal facilities a new specific guidance should be developed in addition to the Basic Standard mentioned. This paper describes the particularities of final disposal facilities indicating that a specific licensing system for this type of facilities should be foreseen. (authors) [es
Communication strategy for final disposal facility

International Nuclear Information System (INIS)

Seppaelae, Timo; Kurki, Osmo

2000-01-01

In May 1999, Posiva filed an application for a policy decision to the Council of State on the construction of a final disposal facility for spent nuclear fuel in Olkiluoto in the municipality of Eurajoki. The decision to be made by the Council of State must be ratified by the Parliament. The precondition for a positive decision is that the preliminary statement on safety to be provided by STLTK by the end of the year 1999 is in favour of Posiva. continuing with its repository development programme, and that the Eurajoki municipality approves the project in its statement by the 28th of January 2000. The policy decision by the Council of State is expected to be made in March followed by the ratification of the Parliament before the summer. In a poll-carried out among 350 decision-makers, less than 10 % of those who answered 134 persons) found Internet as the most important source of Posiva's information on final disposal. On the other hand, over 80 % of those who answered found the information folder as the most significant source of information. When considering all the information available on final disposal (TV, radio, newspapers, authorities, environmental organisations, etc.) Posiva was found to be the most significant source of information while newspapers and periodicals came second. In this case the environmental organisations seemed to have a minor role, as a result of not being too active in confrontation. As a conclusive remark it can be assumed that because it is not only Posiva's information that is relevant to decision-makers, but the media also plays a significant role, the impression that decision-makers have of final disposal is based on a mixture of messages coming from Posiva and from the media. That is why the communication related to decision-makers is also communication with media, in order to ensure that the messages produced by the media support the information produced by Posiva
Application of nanomaterials in the bioanalytical detection of disease-related genes.

Science.gov (United States)

Zhu, Xiaoqian; Li, Jiao; He, Hanping; Huang, Min; Zhang, Xiuhua; Wang, Shengfu

2015-12-15

In the diagnosis of genetic diseases and disorders, nanomaterials-based gene detection systems have significant advantages over conventional diagnostic systems in terms of simplicity, sensitivity, specificity, and portability. In this review, we describe the application of nanomaterials for disease-related genes detection in different methods excluding PCR-related method, such as colorimetry, fluorescence-based methods, electrochemistry, microarray methods, surface-enhanced Raman spectroscopy (SERS), quartz crystal microbalance (QCM) methods, and dynamic light scattering (DLS). The most commonly used nanomaterials are gold, silver, carbon and semiconducting nanoparticles. Various nanomaterials-based gene detection methods are introduced, their respective advantages are discussed, and selected examples are provided to illustrate the properties of these nanomaterials and their emerging applications for the detection of specific nucleic acid sequences. Copyright © 2015. Published by Elsevier B.V.
Waste package/repository impact study: Final report

Energy Technology Data Exchange (ETDEWEB)

1985-09-01

The Waste Package/Repository Impact Study was conducted to evaluate the feasibility of using the current reference salt waste package in the salt repository conceptual design. All elements of the repository that may impact waste package parameters, i.e., (size, weight, heat load) were evaluated. The repository elements considered included waste hoist feasibility, transporter and emplacement machine feasibility, subsurface entry dimensions, feasibility of emplacement configuration, and temperature limits. The evaluations are discussed in detail with supplemental technical data included in Appendices to this report, as appropriate. Results and conclusions of the evaluations are discussed in light of the acceptability of the current reference waste package as the basis for salt conceptual design. Finally, recommendations are made relative to the salt project position on the application of the reference waste package as a basis for future design activities. 31 refs., 11 figs., 11 tabs.
Waste package/repository impact study: Final report

International Nuclear Information System (INIS)

1985-09-01

The Waste Package/Repository Impact Study was conducted to evaluate the feasibility of using the current reference salt waste package in the salt repository conceptual design. All elements of the repository that may impact waste package parameters, i.e., (size, weight, heat load) were evaluated. The repository elements considered included waste hoist feasibility, transporter and emplacement machine feasibility, subsurface entry dimensions, feasibility of emplacement configuration, and temperature limits. The evaluations are discussed in detail with supplemental technical data included in Appendices to this report, as appropriate. Results and conclusions of the evaluations are discussed in light of the acceptability of the current reference waste package as the basis for salt conceptual design. Finally, recommendations are made relative to the salt project position on the application of the reference waste package as a basis for future design activities. 31 refs., 11 figs., 11 tabs
Health insurance premium tax credit. Final regulations.

Science.gov (United States)

2013-02-01

This document contains final regulations relating to the health insurance premium tax credit enacted by the Patient Protection and Affordable Care Act and the Health Care and Education Reconciliation Act of 2010.These final regulations provide guidance to individuals related to employees who may enroll in eligible employer-sponsored coverage and who wish to enroll in qualified health plans through Affordable Insurance Exchanges (Exchanges) and claim the premium tax credit.
Energy efficiency actions related to the rollout of smart meters for small consumers, application to the Austrian system

International Nuclear Information System (INIS)

Olmos, Luis; Ruester, Sophia; Liong, Siok-Jen; Glachant, Jean-Michel

2011-01-01

Smart meters (SM) may provide large benefits to all stakeholders by providing the information required to implement certain sets of demand response actions. Benefits produced by SM related actions depend on the features of these actions, the system and the targeted consumer group. We first lay out an analytical framework to analyze the application of Demand Response (DR) actions. Based on this framework, we describe a way to determine the response of domestic load in a system to the implementation of DR actions. We propose determining the overall change in the consumption behavior of domestic load based on previously obtained estimates of the peak load and overall consumption reduction for different types of consumers in different types of systems resulting from the application of each set of actions. We have carried out a comprehensive literature review to provide here such estimates. We apply the analytical framework and methodology developed to characterize the reaction of consumers in the Austrian system to different SM related actions. Finally, we provide guidelines on which DR actions to implement in this system and how to implement them. The use of advanced indirect feedback on consumption behavior, critical peak prices and simple time-of-use tariffs is advocated. -- Highlights: → System and consumer features determine households' potential benefits from a Demand Response (DR) action. → Consumers' perception of the net benefits of actions determines their actual reaction. → Consumers' reaction can be characterized by their peak load and consumption reduction. → DR actions implemented should be accepted and understood by all stakeholders involved.
Emerging chemical strategies for imprinting magnetism in graphene and related 2D materials for spintronic and biomedical applications.

Science.gov (United States)

Tuček, Jiří; Błoński, Piotr; Ugolotti, Juri; Swain, Akshaya Kumar; Enoki, Toshiaki; Zbořil, Radek

2018-03-26

Graphene, a single two-dimensional sheet of carbon atoms with an arrangement mimicking the honeycomb hexagonal architecture, has captured immense interest of the scientific community since its isolation in 2004. Besides its extraordinarily high electrical conductivity and surface area, graphene shows a long spin lifetime and limited hyperfine interactions, which favors its potential exploitation in spintronic and biomedical applications, provided it can be made magnetic. However, pristine graphene is diamagnetic in nature due to solely sp2 hybridization. Thus, various attempts have been proposed to imprint magnetic features into graphene. The present review focuses on a systematic classification and physicochemical description of approaches leading to equip graphene with magnetic properties. These include introduction of point and line defects into graphene lattices, spatial confinement and edge engineering, doping of graphene lattice with foreign atoms, and sp3 functionalization. Each magnetism-imprinting strategy is discussed in detail including identification of roles of various internal and external parameters in the induced magnetic regimes, with assessment of their robustness. Moreover, emergence of magnetism in graphene analogues and related 2D materials such as transition metal dichalcogenides, metal halides, metal dinitrides, MXenes, hexagonal boron nitride, and other organic compounds is also reviewed. Since the magnetic features of graphene can be readily masked by the presence of magnetic residues from synthesis itself or sample handling, the issue of magnetic impurities and correct data interpretations is also addressed. Finally, current problems and challenges in magnetism of graphene and related 2D materials and future potential applications are also highlighted.
Final Report: Performance Engineering Research Institute

Energy Technology Data Exchange (ETDEWEB)

Mellor-Crummey, John [Rice Univ., Houston, TX (United States)

2014-10-27

This document is a final report about the work performed for cooperative agreement DE-FC02-06ER25764, the Rice University effort of Performance Engineering Research Institute (PERI). PERI was an Enabling Technologies Institute of the Scientific Discovery through Advanced Computing (SciDAC-2) program supported by the Department of Energy's Office of Science Advanced Scientific Computing Research (ASCR) program. The PERI effort at Rice University focused on (1) research and development of tools for measurement and analysis of application program performance, and (2) engagement with SciDAC-2 application teams.
Advisory group meeting on safeguards related to final disposal of nuclear material in waste and spent fuel

International Nuclear Information System (INIS)

1988-07-01

This paper is primarily concerned with Section 11 of INFCIRC/153 which provides for the possible termination of safeguards based on a determination that the nuclear material in question has been consumed, has been diluted, or has become practicably irrecoverable. Two distinctly different categories of nuclear material have been suggested for possible termination of safeguards based on a determination that the nuclear material has become practicably irrecoverable: One relates to a variety of low concentration waste materials, meaning thereby materials which the State or plant operator considers to be of questionable economic recoverability and the other relates to the spent fuel placed in facilities described as ''permanent repositories'' which are at least claimed to represent ''final disposal'' facilities and are candidates for a possible determination of practicably irrecoverable. 26 refs, tabs
Safety-evaluation report related to the final design of the Standard Nuclear Steam Supply Reference System - CESSAR System 80. Docket No. STN 50-470

International Nuclear Information System (INIS)

1983-03-01

Supplement No. 1 to the Safety Evaluation Report for the application filed by Combustion Engineering, Inc. for a Final Design Approval for the Combustion Engineering Standard Safety Analysis Report (STN 50-470) has been prepared by the Office of Nuclear Reactor Regulation of the Nuclear Regulatory Commission. The purpose of this supplement is to update the Safety Evaluation by providing: (1) the evaluation of additional information submitted by the applicant since the Safety Evaluation Report was issued, (2) the evaluation of the matters the staff had under review when the Safety Evaluation Report was issued, and (3) the response to comments made by the Advisory Committee on Reactor Safeguards
Final report

Energy Technology Data Exchange (ETDEWEB)

Jarillo-Herrero, Pablo [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

2017-02-07

This is the final report of our research program on electronic transport experiments on Topological Insulator (TI) devices, funded by the DOE Office of Basic Energy Sciences. TI-based electronic devices are attractive as platforms for spintronic applications, and for detection of emergent properties such as Majorana excitations , electron-hole condensates , and the topological magneto-electric effect . Most theoretical proposals envision geometries consisting of a planar TI device integrated with materials of distinctly different physical phases (such as ferromagnets and superconductors). Experimental realization of physics tied to the surface states is a challenge due to the ubiquitous presence of bulk carriers in most TI compounds as well as degradation during device fabrication.
49 CFR 1515.11 - Review by administrative law judge and TSA Final Decision Maker.

Science.gov (United States)

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Review by administrative law judge and TSA Final... Review by administrative law judge and TSA Final Decision Maker. (a) Scope. This section applies to the following applicants: (1) An applicant who seeks review of a decision by TSA denying a request for a waiver...
Final Report, “Exploiting Global View for Resilience”

Energy Technology Data Exchange (ETDEWEB)

Chien, Andrew [Univ. of Chicago, IL (United States)

2017-03-29

Final technical report for the "Exploiting Global View for Resilience" project. The GVR project aims to create a new approach to portable, resilient applications. The GVR approach builds on a global view data model,, adding versioning (multi-version), user control of timing and rate (multi-stream), and flexible cross layer error signalling and recovery. With a versioned array as a portable abstraction, GVR enables application programmers to exploit deep scientific and application code insights to manage resilience (and its overhead) in a flexible, portable fashion.
Design, construction and conditions of the application of unreinforced concrete final lining in conventionally driven tunnels

Science.gov (United States)

Faltýnek, Jan; Hořejší, Jiří; Mařík, Libor; Růžička, Pavel

2017-09-01

The way to an economic design in the final lining in conventionally driven tunnels lies in structural analysing based on the actually encountered geotechnical conditions. Regarding reinforced concrete structures, many standards and regulations applicable to designing and building structures and taking them over by the client before their commissioning and before the end of the warranty period respectively exist in the Czech Republic. If the local conditions allow it, it is possible to design the final lining as an unreinforced concrete structure. In such a case it is necessary to take the differences into consideration in the structural design and in the possibilities of the lining behaviour and to set criteria for taking over the lining allowing for its use. Setting too stringent criteria for cracking can lead to an increase in the contract price, either because of the necessity for reinforcing the lining or because of the fact that the contractor reduces the risk by incorporating the assumed cost of repairs into the total cost. The paper describes basic differences in the approach to reinforced concrete and unreinforced concrete linings, the possibilities of limiting formation of cracks by means of the concrete mix design, by selection of the technological procedure of the work and the method of curing after stripping. The text contains a comparison of criteria for assessing the surface of an unreinforced concrete lining with criteria in foreign regulations.
Photochemical Synthesis of Silver Nanodecahedrons and Related Nanostructures for Plasmonic Field Enhancement Applications

Science.gov (United States)

Lu, Haifei

Noble-metal nanocrystals have received considerable attention in recent years for their size and shape dependent localized surface Plasmon resonances (LSPR). Various applications based on colloidal nanoparticles, such as surface enhanced Raman scattering (SERS), surface enhanced fluorescence (SEF), plasmonic sensing, photothermal therapy etc., have been broadly explored in the field of biomedicine, because of their extremely large optical scattering and absorption cross sections, as well as giant electric field enhancement on their surface. However, despite its high chemical stability, gold exhibits quite large losses and electric field enhancement is comparatively weaker than silver. Silver nanoparticles synthesized by the traditional technique only cover an LSPR ranged from 420~500 nm. On the other hand, the range of 500~660 nm, which is covered by several easily available commercial laser lines, very limited colloidal silver nanostructures with controllable size and shape have been reported, and realization of tuning the resonance to longer wavelengths is very important for the practical applications. In this thesis, a systematic study on photochemical synthesis of silver nanodecahedrons (NDs) and related nanostructures, and their plasmonic field enhancements are presented. First, the roles of chemicals and the light source during the formation of silver nanoparticles have been studied. We have also developed a preparation route for the production size-controlled silver nanodecahedrons (LSPR range 420 ~ 660 nm) in high purity. Indeed our experiments indicate that both the chemicals and the light sources can affect the shape and purity of final products. Adjusting the molar ratio between sodium citrate and silver nitrate can help to control the crystal structure following rapid reduction from sodium borohydride. Light from a blue LED (465 nm) can efficiently transform the polyvinylpyrrolidone stabilized small silver nanoparticles into silver NDs through photo
Medicare Program: Hospital Outpatient Prospective Payment and Ambulatory Surgical Center Payment Systems and Quality Reporting Programs; Short Inpatient Hospital Stays; Transition for Certain Medicare-Dependent, Small Rural Hospitals Under the Hospital Inpatient Prospective Payment System; Provider Administrative Appeals and Judicial Review. Final rule with comment period; final rule.

Science.gov (United States)

2015-11-13

This final rule with comment period revises the Medicare hospital outpatient prospective payment system (OPPS) and the Medicare ambulatory surgical center (ASC) payment system for CY 2016 to implement applicable statutory requirements and changes arising from our continuing experience with these systems. In this final rule with comment period, we describe the changes to the amounts and factors used to determine the payment rates for Medicare services paid under the OPPS and those paid under the ASC payment system. In addition, this final rule with comment period updates and refines the requirements for the Hospital Outpatient Quality Reporting (OQR) Program and the ASC Quality Reporting (ASCQR) Program. Further, this document includes certain finalized policies relating to the hospital inpatient prospective payment system: Changes to the 2-midnight rule under the short inpatient hospital stay policy; and a payment transition for hospitals that lost their status as a Medicare-dependent, small rural hospital (MDH) because they are no longer in a rural area due to the implementation of the new Office of Management and Budget delineations in FY 2015 and have not reclassified from urban to rural before January 1, 2016. In addition, this document contains a final rule that finalizes certain 2015 proposals, and addresses public comments received, relating to the changes in the Medicare regulations governing provider administrative appeals and judicial review relating to appropriate claims in provider cost reports.
Medicare program; hospital inpatient prospective payment systems for acute care hospitals and the long-term care hospital prospective payment system and Fiscal Year 2014 rates; quality reporting requirements for specific providers; hospital conditions of participation; payment policies related to patient status. Final rules.

Science.gov (United States)

2013-08-19

We are revising the Medicare hospital inpatient prospective payment systems (IPPS) for operating and capital-related costs of acute care hospitals to implement changes arising from our continuing experience with these systems. Some of the changes implement certain statutory provisions contained in the Patient Protection and Affordable Care Act and the Health Care and Education Reconciliation Act of 2010 (collectively known as the Affordable Care Act) and other legislation. These changes will be applicable to discharges occurring on or after October 1, 2013, unless otherwise specified in this final rule. We also are updating the rate-of-increase limits for certain hospitals excluded from the IPPS that are paid on a reasonable cost basis subject to these limits. The updated rate-of-increase limits will be effective for cost reporting periods beginning on or after October 1, 2013. We also are updating the payment policies and the annual payment rates for the Medicare prospective payment system (PPS) for inpatient hospital services provided by long-term care hospitals (LTCHs) and implementing certain statutory changes that were applied to the LTCH PPS by the Affordable Care Act. Generally, these updates and statutory changes will be applicable to discharges occurring on or after October 1, 2013, unless otherwise specified in this final rule. In addition, we are making a number of changes relating to direct graduate medical education (GME) and indirect medical education (IME) payments. We are establishing new requirements or have revised requirements for quality reporting by specific providers (acute care hospitals, PPS-exempt cancer hospitals, LTCHs, and inpatient psychiatric facilities (IPFs)) that are participating in Medicare. We are updating policies relating to the Hospital Value-Based Purchasing (VBP) Program and the Hospital Readmissions Reduction Program. In addition, we are revising the conditions of participation (CoPs) for hospitals relating to the
Master's Thesis Supervision: Relations between Perceptions of the Supervisor-Student Relationship, Final Grade, Perceived Supervisor Contribution to Learning and Student Satisfaction

Science.gov (United States)

de Kleijn, Renske A. M.; Mainhard, M. Tim; Meijer, Paulien C.; Pilot, Albert; Brekelmans, Mieke

2012-01-01

Master's thesis supervision is a complex task given the two-fold goal of the thesis (learning and assessment). An important aspect of supervision is the supervisor-student relationship. This quantitative study (N = 401) investigates how perceptions of the supervisor-student relationship are related to three dependent variables: final grade,…
Final Report: Migration Mechanisms for Large-scale Parallel Applications

Energy Technology Data Exchange (ETDEWEB)

Jason Nieh

2009-10-30

Process migration is the ability to transfer a process from one machine to another. It is a useful facility in distributed computing environments, especially as computing devices become more pervasive and Internet access becomes more ubiquitous. The potential benefits of process migration, among others, are fault resilience by migrating processes off of faulty hosts, data access locality by migrating processes closer to the data, better system response time by migrating processes closer to users, dynamic load balancing by migrating processes to less loaded hosts, and improved service availability and administration by migrating processes before host maintenance so that applications can continue to run with minimal downtime. Although process migration provides substantial potential benefits and many approaches have been considered, achieving transparent process migration functionality has been difficult in practice. To address this problem, our work has designed, implemented, and evaluated new and powerful transparent process checkpoint-restart and migration mechanisms for desktop, server, and parallel applications that operate across heterogeneous cluster and mobile computing environments. A key aspect of this work has been to introduce lightweight operating system virtualization to provide processes with private, virtual namespaces that decouple and isolate processes from dependencies on the host operating system instance. This decoupling enables processes to be transparently checkpointed and migrated without modifying, recompiling, or relinking applications or the operating system. Building on this lightweight operating system virtualization approach, we have developed novel technologies that enable (1) coordinated, consistent checkpoint-restart and migration of multiple processes, (2) fast checkpointing of process and file system state to enable restart of multiple parallel execution environments and time travel, (3) process migration across heterogeneous

Unusual initial and final state effects in quantum chromodynamics

International Nuclear Information System (INIS)

Nelson, C.A.

1990-12-01

We have constructed fundamental test which can be used to probe discrete symmetries, and their possible violations, in the required ''new physics'' beyond the standard model. In a recent paper for applications at an e + e - collider, we have proposed a simple test for ''maximal P -- maximal C'' violation in the Z degree → τ 1 - τ 1 + coupling. For τ minus-plus → π minus-plus ν, for example, this test is based on an azimuthal correlation function I(φ e , φ) where the azimuthal angles are defined relative to the final π 1 - . For e - e + collisions in the Γ or J/Ψ regions, I(φ e , φ) can be used to test for a complex phase in the γ* → τ - τ + coupling. In other research programs, we are continuing to investigate our proposal that partons be identified with nearly degenerate, coherent quark-gluon ''jet'' states, and have proven a completeness relation for the q-analogue of the unusual coherent states
[Progress of midfacial fat compartments and related clinical applications].

Science.gov (United States)

Wen, Lihong; Wang, Jinhuang; Li, Yang; Liu, Dalie

2018-02-01

To review the research progress of midfacial fat compartments, and to thoroughly understand its current state of the anatomy and the aging morphologic characters of midfacial fat compartments, as well as the current status of clinical applications. The recent literature concerning the midfacial fat compartments and related clinical applications were extensively reviewed and analyzed. Midfacial fat layer has been considered as a fusion and a continuous layer, experiencing a global atrophy when aging. As more anatomical researches have done, recent studies have shown that midfacial fat layer is broadly divided into superficial and deep layers, which are both divided into different fat compartments by fascia, ligaments, or muscles. Midfacial fat compartments tend to atrophy with age, specifically in the deep fat compartments while hypertrophy in the superficial fat compartments. Clinical applications show that fat volumetric restoration with deep medial cheek fat and Ristow's space can restore the appearance of midface effectively. In recent years, the researches of midfacial fat compartments have achieved obvious progress, which will provide new ideas and basis for fat volumetric restoration. Corresponding treatments are selected based on different sites and different layers with different aging changes, reshaping a more youthful midface.
Magnetic nanoparticles: surface effects and properties related to biomedicine applications.

Science.gov (United States)

Issa, Bashar; Obaidat, Ihab M; Albiss, Borhan A; Haik, Yousef

2013-10-25

Due to finite size effects, such as the high surface-to-volume ratio and different crystal structures, magnetic nanoparticles are found to exhibit interesting and considerably different magnetic properties than those found in their corresponding bulk materials. These nanoparticles can be synthesized in several ways (e.g., chemical and physical) with controllable sizes enabling their comparison to biological organisms from cells (10-100 μm), viruses, genes, down to proteins (3-50 nm). The optimization of the nanoparticles' size, size distribution, agglomeration, coating, and shapes along with their unique magnetic properties prompted the application of nanoparticles of this type in diverse fields. Biomedicine is one of these fields where intensive research is currently being conducted. In this review, we will discuss the magnetic properties of nanoparticles which are directly related to their applications in biomedicine. We will focus mainly on surface effects and ferrite nanoparticles, and on one diagnostic application of magnetic nanoparticles as magnetic resonance imaging contrast agents.
10 CFR 611.100 - Eligible applicant.

Science.gov (United States)

2010-01-01

... manufacturer that manufactured in model year 2005, vehicles subject to the CAFE requirements, the applicant... the most recent year for which final CAFE compliance data is available, at the time of application, is... the MY 2005 final CAFE compliance data. (2) If the applicant is an automobile manufacturer that did...
Application of isotope hydrology related to limnological investigations in India

International Nuclear Information System (INIS)

Saravana Kumar, U.; Navada, S.V.

2007-01-01

Among the various hydrological environments, lakes are often well suited to investigate using isotopic tracers, environmental or injected. Lakes are systems, which although complex, are generally accessible to all points for sample collection, tracer injections and in-situ measurement. The various types of isotope applications in lake studies (limnology), reported in various literatures include; i) Lake dynamics investigations, interaction between lakes and adjacent water bodies (springs, river, groundwater etc) and the related water balance computations, ii) Lake sedimentation processes, iii) Gas exchange between lake water and the atmosphere, iv) Paleo-hydrologic and paleo-climatological problems etc. In this article, a few Indian case studies covering some of the above types of isotope applications in limnology are briefly summarized. (author)
38 CFR 11.116 - Death of veteran before final settlement.

Science.gov (United States)

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Death of veteran before... Death of veteran before final settlement. If the veteran dies after making application under the... considered valid if found to bear the bona-fide signature of the applicant, discloses an intention to claim...
Equilibrium relations and bipolar cognitive mapping for online analytical processing with applications in international relations and strategic decision support.

Science.gov (United States)

Zhang, Wen-Ran

2003-01-01

Bipolar logic, bipolar sets, and equilibrium relations are proposed for bipolar cognitive mapping and visualization in online analytical processing (OLAP) and online analytical mining (OLAM). As cognitive models, cognitive maps (CMs) hold great potential for clustering and visualization. Due to the lack of a formal mathematical basis, however, CM-based OLAP and OLAM have not gained popularity. Compared with existing approaches, bipolar cognitive mapping has a number of advantages. First, bipolar CMs are formal logical models as well as cognitive models. Second, equilibrium relations (with polarized reflexivity, symmetry, and transitivity), as bipolar generalizations and fusions of equivalence relations, provide a theoretical basis for bipolar visualization and coordination. Third, an equilibrium relation or CM induces bipolar partitions that distinguish disjoint coalition subsets not involved in any conflict, disjoint coalition subsets involved in a conflict, disjoint conflict subsets, and disjoint harmony subsets. Finally, equilibrium energy analysis leads to harmony and stability measures for strategic decision and multiagent coordination. Thus, this work bridges a gap for CM-based clustering and visualization in OLAP and OLAM. Basic ideas are illustrated with example CMs in international relations.
Interim safety evaluation report related to operation of Enrico Fermi Atomic Power Plant, Unit 2, Detroit Edison Company

International Nuclear Information System (INIS)

1977-09-01

This interim report summarizes the scope and results of the radiological safety review performed to date by the NRC staff with respect to the operating license phase for the Enrico Fermi Atomic Power Plant, Unit 2. The major effort was the review of the facility design and proposed operating procedures described in applicant's Final Safety Analysis Report. In the course of the review, several meetings were held with representatives of the applicant to discuss plant design, construction and proposed operation. Additional information was requested, which the applicant provided through Amendment 7 to the Final Safety Analysis Report. A chronology of the principal actions relating to the review of the application is attached as Appendix A to the report. The Final Safety Analysis Report and amendments thereto are available for public inspection at the Nuclear Regulatory Commission Public Document Room, 1717 H Street, N. W., Washington, D.C. and at Monroe County Library System, 3700 South Custer Road, Monroe, Michigan 48161
'Key' sectors in final energy consumption: an input-output application to the Spanish case

International Nuclear Information System (INIS)

Alcantara, Vicent; Padilla, Emilio

2003-01-01

In this paper we analyze the determination of 'key' sectors in the final energy consumption. We approach this issue from an input-output perspective and we design a methodology based on the elasticities of the demands of final energy consumption. As an exercise, we apply the proposed methodology to the Spanish economy. The analysis allows us to indicate the greater or lesser relevance of the different sectors in the consumption of final energy, pointing out which sectors deserve greater attention in the Spanish case and showing the implications for energy policy
Final disposal of spent fuels and high activity waste: status and trends in the world

International Nuclear Information System (INIS)

Herscovich de Pahissa, Marta

2007-01-01

Geological disposal of spent nuclear fuel and high level waste from reprocessing, properly conditioned, is described. This issue is a major challenge related to radioactive waste management. Several options are analyzed, such as application of separation and transmutation to high level waste before final disposal; need of multinational repositories; a phased approach to deep geological disposal and long term surface storage. Bearing in mind this information, a future article will report the state of art in the world. (author) [es
Biomedical Applications of Nanodiamonds: An Overview.

Science.gov (United States)

Passeri, D; Rinaldi, F; Ingallina, C; Carafa, M; Rossi, M; Terranova, M L; Marianecci, C

2015-02-01

Nanodiamonds are a novel class of nanomaterials which have raised much attention for application in biomedical field, as they combine the possibility of being produced on large scale using relatively inexpensive synthetic processes, of being fluorescent as a consequence of the presence of nitrogen vacancies, of having their surfaces functionalized, and of having good biocompatibility. Among other applications, we mainly focus on drug delivery, including cell interaction, targeting, cancer therapy, gene and protein delivery. In addition, nanodiamonds for bone and dental implants and for antibacterial use is discussed. Techniques for detection and imaging of nanodiamonds in biological tissues are also reviewed, including electron microscopy, fluorescence microscopy, Raman mapping, atomic force microscopy, thermal imaging, magnetic resonance imaging, and positron emission tomography, either in vitro, in vivo, or ex vivo. Toxicological aspects related to the use of nanodiamonds are also discussed. Finally, patents, preclinical and clinical trials based on the use of nanodiamonds for biomedical applications are reviewed.
Nano crystals-Related Synthesis, Assembly, and Energy Applications 2012

International Nuclear Information System (INIS)

Zou, B.; Yu, W.W.; Seo, J.; Zhu, T.; Hu, M.Z.

2012-01-01

During the past decades, nano crystals have attracted broad attention due to their unique shape- and size-dependent physical and chemical properties that differ drastically from their bulk counterparts. Hitherto, much effort has been dedicated to achieving rational controlling over the morphology, assembly, and related energy applications of the nano materials. Therefore, the ability to manipulate the morphology, size, and size distribution of inorganic nano materials is still an important goal in modern materials physics and chemistry. Especially, the world's demand for energy supply is causing a dramatic escalation of social and political unrest. Likewise, the environmental impact of the global climate change due to the combustion of fossil fuel is becoming increasingly alarming. These problems compel us to search for effective routes to build devices that can supply sustainable energy, with not only high efficiency but also environmental friendship. One of ways to relieve the energy crisis is to exploit devices based on renewable energy sources, such as solar energy and water power. Aiming at this exploration, the primary stage requires the design of appropriate strategies for the synthesis of high-quality nano crystals with respect to size uniformity and superior electrochemical performances. As a consequence, we organize the current special issue for Journal of Nano materials to provide the authors with a platform and readers with the latest achievements of nano crystals-related synthesis, assembly, and energy applications.
Qualification of final closure for disposal container I - applicability of TIG and EBW for overpack welding

International Nuclear Information System (INIS)

Asano, H.; Kawahara, K.; Ishii, J.; Shige, T.

2002-01-01

Regarding the final sealing technique of the overpack using carbon steel, one of the candidate materials for the disposal container in the geological disposal of high-level radioactive waste in Japan, welding tests were conducted using TIG (GTAW), a typical arc welding process, and electron beam welding (EBW), a high-energy beam welding process. The purpose of the tests was to evaluate the applicability, the scope of the applications and the conditions for the application of the existing techniques; while also examining the welding conditions and the weld quality. Regarding TIG, the optimum welding conditions (the conditions pertaining to the welding procedures and the groove geometry) were checked by using a specimen with a plate thickness of 50 mm, and then circumferential welding tests were conducted for cylindrical specimens with a groove depth of 100 mm and 150 mm. Radiographic testing showed that there was no significant weld defect in the weld and that the welding characteristics were satisfactory. The results of the test of the mechanical properties of the joint were also satisfactory. Measurement of the temperature distribution and the residual stress distribution at the time of the welding was conducted for an evaluation of the residual stress caused by the welding, and an appropriate residual stress analysis method was developed, which confirmed the generation of tensile stress along the circumferential direction of the weld. Then it was pointed out that a necessity of further consideration of how to reduce the stress and to examine the influence that residual stress has on corrosion property. The goal in the EBW test was to achieve a one-pass full penetration welding process for 190 mm while conducting a partial penetration welding test for a welding depth of 80 mm. Subsequent radiographic testing confirmed that there was no significant weld defect. (orig.)
Applications of magnetic 'power production' and its assessment. A feasibility study - Final Report

Energy Technology Data Exchange (ETDEWEB)

Kitanovski, A.; Diebold, M.; Vuarnoz, D.; Gonin, C.; Egolf, P. W

2008-07-01

This final report for the Swiss Federal Office of Energy (SFOE) takes a look at how magnetic power conversion systems could present an alternative to conventional power conversion technologies. Magnetic 'power generators' based on permanent or superconducting magnets are proposed and analysed for numerous heat-source temperatures, magnetic field strengths and frequencies of rotating porous heat exchanger machines. Such machines have been proposed in a patent deposited by the University of Applied Sciences of Western Switzerland (HEIG-VD/IGT/SIT division). A special numerical analysis is looked at that takes advantage of a thermodynamic model which permits the determination of thermodynamic efficiency, exergy efficiency, total mass and total volume of such magnetic power conversion machines. Magneto-caloric materials are discussed and the advantages and disadvantages of such systems are discussed. The report is concluded with an overview of various systems working under different operating conditions. The systems are listed and evaluated as far as their potential for application in the area of magnetic power conversion is concerned.
Low temperature geothermal energy applications in the Albuquerque area. Final report, July 1, 1978-August 18, 1979

Energy Technology Data Exchange (ETDEWEB)

Kauffman, D.; Houghton, A.V.

1979-01-01

A study was made of the engineering and economic feasibility of hot water geothermal energy applications in the Albuquerque area. A generalized system design was developed and used as the basis for a series of economic case studies. Reservoir and user siting considerations were studied in light of the economic findings. Several specific potential applications were identified, including university campuses, industrial and commercial facilities, and residential buildings. Specific key technical problems relating to Albuquerque area applications were studied. These included environmental impacts, corrosion, scaling, heat losses in wells and transmission lines, heat exchangers, control systems, and system utilization and reliability. It is concluded that geothermal energy could be competitive with other energy sources for space heating and limited industrial use for moderate to large (10 million Btu/hr or more) energy using systems.
High technology for radiation application

International Nuclear Information System (INIS)

Iida, Toshiyuki

2005-03-01

Fundamentals of radiations, radioactivity, and their applications in recent industrial, medical, agricultural and various research fields are reviewed. The book begins with historical description regarding to discovery of radiation at the end of 19th century and the exploration into the inside of an atom utilizing the radiation discovered, discovery of the neutron which finally leaded to nuclear energy liberation. Developments of radiation sources, including nuclear reactors, and charged-particle accelerators follow with simultaneous description on radiation measurement or detection technology. In medical fields, X-ray diagnosis, interventional radiology (IVR), nuclear medicine (PET and others), and radiation therapy are introduced. In pharmaceutical field, synthesis of labeled compounds and tracer techniques are explained. In industrial application, radiation-reinforced wires and heat-resistant cables whose economic effect can be estimated to amount to more than 10 12 yen, radiation mutation, food irradiation, and applied accelerators such as polymer modifications, decomposition of environmentally harmful substances, and ion-implantations important in semiconductor device fabrication. Finally, problems relating to general public such as radiation education and safety concept are also discussed. (S. Ohno)
Program and Abstracts, Boron Americas IX Final Report

Energy Technology Data Exchange (ETDEWEB)

Feakes, Debra A.

2006-08-09

The Scientific and Technical Information (STI) submitted includes the final report and a collection of abstracts for the Ninth Boron in the Americas Conference which was held May 19-22, 2004, in San Marcos, Texas. The topics covered in the abstracts include: Application in Medicine, Application in Organic Synthesis and Catalysis, Boranes and Carboranes, Materials and Polymers, Metallaboranes and Metallacarboranes, Organoboron Compounds, Synthesis and Catalysis, and Theoretical Studies. Attendees represented researchers from government, industry, and academia.
The principle of relativity and the problem of knowledge

International Nuclear Information System (INIS)

Suarez Antola, R.

2011-01-01

This book can be considered as an introduction to some issues on the border between philosophy and science. It is intended for an audience interested in the problems that arise in scientific knowledge about the so-called post-modern era, and willing to study in some detail and depth the physical and mathematical foundations of the theory of relativity, and some of applications in astrophysics and cosmology. It assumes familiarity with the epistemology and other branches of philosophy. The philosophical content, including epistemological, are introduced as needed, starting with the first chapter is intended entirely to them, culminating in the fourteenth chapter, which discusses the structure of the theory of relativity, the theory general physics and cosmology from that point of view. In his chapters describes: the development of ideas in the Newtonian mechanics of particles and the classical theory of fields, including electromagnetism, the crisis in the foundations of nineteenth-century physics, the foundations, limitations and some applications of restricted theory, knowledge of mathematics, calculus of variations, foundations of general relativity theory, applications Schwartzschild solution, applications in astronomy and cosmology, relativistic physics issues and finally, aspects of scientific research work from the point of psychological and sociological
An application of an optimal statistic for characterizing relative orientations

Science.gov (United States)

Jow, Dylan L.; Hill, Ryley; Scott, Douglas; Soler, J. D.; Martin, P. G.; Devlin, M. J.; Fissel, L. M.; Poidevin, F.

2018-02-01

We present the projected Rayleigh statistic (PRS), a modification of the classic Rayleigh statistic, as a test for non-uniform relative orientation between two pseudo-vector fields. In the application here, this gives an effective way of investigating whether polarization pseudo-vectors (spin-2 quantities) are preferentially parallel or perpendicular to filaments in the interstellar medium. For example, there are other potential applications in astrophysics, e.g. when comparing small-scale orientations with larger scale shear patterns. We compare the efficiency of the PRS against histogram binning methods that have previously been used for characterizing the relative orientations of gas column density structures with the magnetic field projected on the plane of the sky. We examine data for the Vela C molecular cloud, where the column density is inferred from Herschel submillimetre observations, and the magnetic field from observations by the Balloon-borne Large-Aperture Submillimetre Telescope in the 250-, 350- and 500-μm wavelength bands. We find that the PRS has greater statistical power than approaches that bin the relative orientation angles, as it makes more efficient use of the information contained in the data. In particular, the use of the PRS to test for preferential alignment results in a higher statistical significance, in each of the four Vela C regions, with the greatest increase being by a factor 1.3 in the South-Nest region in the 250 - μ m band.
Some problems relating to application of safeguards in the future

International Nuclear Information System (INIS)

Tolchenkov, D.L.

1983-01-01

By the end of this century there will have been a considerable increase in the amount of nuclear material and the number of facilities subject to IAEA safeguards. The IAEA will therefore be faced with problems due to the increased volume of safeguards activity, the application of safeguards to new types of facility and to large facilities, the optimization of the existing IAEA safeguards system and so on. The authors analyse the potential growth in the IAEA's safeguards activities up to the year 2000 and consider how to optimize methods for the application of safeguards, taking into account a number of factors relating to a State's nuclear activity, the application of full-scope IAEA safeguards etc. On the basis of a hypothetical model of the nuclear fuel cycle that allows for the factors considered as part of the International Nuclear Fuel Cycle Evaluation (INFCE), the authors assess the possible risk of diversion as a function of a full-scope safeguards effort. They also examine possible conceptual approaches to safeguarding large-scale facilities such as fuel reprocessing and uranium enrichment plants. (author)

The application of PET/CT in immunoglobulin G4-related disease

International Nuclear Information System (INIS)

Zhang Huiwei; Zhao Jun

2013-01-01

Immunoglobulin G4 (IgG4)-related disease is a kind of new systemic entity characterized by mass-forming lesions in various organs that consist of lymphoplasmacytic infiltrates and fibrosclerosis with numerous IgG4-positive plasma cells. PET/CT has been widely used in clinical as a whole body examination that earned plenty of successful experience, especially in multiple locations and organs cancer such as lymphoma. PET/CT also has a potential application in IgG4-related diseases as its feature of systemic. (authors)
Double scattering and final-state interaction in Xd ---> YNN

CERN Document Server

Alberi, G; Thomé, Z D

1974-01-01

A unified approach to double scattering, as well as the final-state interaction of the two nucleons at small and large momentum transfers are given. The closure sum rule for the final-state interaction at small momentum transfers is shown explicitly in a simple model for the deuteron wave function and nucleon interaction. An application for the process K/sup +/d to K/sup 0/pp is given, trying to explain discrepancies present in recent experiments. (35 refs).
A Novel Final Focus Design for Future Linear Colliders

Energy Technology Data Exchange (ETDEWEB)

Seryi, Andrei

2000-05-30

The length, complexity and cost of the present Final Focus designs for linear colliders grows very quickly with the beam energy. In this letter, a novel final focus system is presented and compared with the one proposed for NLC. This new design is simpler, shorter and cheaper, with comparable bandwidth, tolerances and tunability. Moreover, the length scales slower than linearly with energy allowing for a more flexible design which is applicable over a much larger energy range.
Application of nuclear track detectors for radon related measurments

International Nuclear Information System (INIS)

Abu-Jarad, F.A.

1988-01-01

The application of nuclear track detectors for radon related measurements is discussed. The ''Can Technique'', used for measuring radon emanation from building materials, walls and soil; the ''Working Level Monitor'', used for measuring short period working levels of radon daughters in houses; and ''Passive Radon Dosimeters'', used to measure radon levels in houses for long term (few months) periods are described. Application of nuclear track detectors for measuring the radon daughters plate-out on the surface of mixing fan blades and walls are discussed. The uranium content of some wall papers was found to be 6 ppm. The variation of radon progeny concentration in the same room was measured and supported by another study through Gas Chromatograph measurements. The independence of radon concentration on room level in high-rise buildings was established. The effect of sub-floor radon emanation on radon concentration in houses is dependent on whether there is sub-floor ventilation or not. (author)
Traceability and communication of requirements in digital I and C systems development. Final report

Energy Technology Data Exchange (ETDEWEB)

Sivertsen, T.; Fredriksen, Rune; Thunem, A.P.J. [Inst. for Energy Technology, Halden (Norway); Holmberg, J.E.; Valkonen, J.; Ventae, O. [VTT (Finland); Andersson, J.O. [Ringhals AB (Sweden)

2005-10-01

The overall objective of the TACO project has been to improve the knowledge on principles and best practices related to the traceability and communication of requirements in digital I and C systems development. On the basis of experiences in the Nordic countries, the project has aimed at identifying the best practices and most important criteria for ensuring effective communication in relation to requirements elicitation and analysis, understandability of requirements to all parties, and traceability of requirements through the different design phases. It is expected that the project will provide important input to the development of guidelines and establishment of recommended practices related to these activities. The report provides a summary of the project activities and deliverables, discusses possible application areas, and provides a link to its utilization in the project 'Management of Requirements in NPP Modernization Projects' (NKS-R-2005-47). In the preparation of the final report, a number of application areas have been identified where the TACO deliverables, first of all the TACO Shell and the TACO Traceability Model, can be utilized. The report aims at facilitating such utilization, by defining the context and main issues, explaining the main aspects of the deliverables, discussing the challenges experienced in the different application domains with respect requirements management, traceability and communication and how can the TACO results contribute to solving these challenges. (au)
Traceability and communication of requirements in digital I and C systems development. Final report

International Nuclear Information System (INIS)

Sivertsen, T.; Fredriksen, Rune; Thunem, A.P.J.; Holmberg, J.E.; Valkonen, J.; Ventae, O.; Andersson, J.O.

2005-10-01

The overall objective of the TACO project has been to improve the knowledge on principles and best practices related to the traceability and communication of requirements in digital I and C systems development. On the basis of experiences in the Nordic countries, the project has aimed at identifying the best practices and most important criteria for ensuring effective communication in relation to requirements elicitation and analysis, understandability of requirements to all parties, and traceability of requirements through the different design phases. It is expected that the project will provide important input to the development of guidelines and establishment of recommended practices related to these activities. The report provides a summary of the project activities and deliverables, discusses possible application areas, and provides a link to its utilization in the project 'Management of Requirements in NPP Modernization Projects' (NKS-R-2005-47). In the preparation of the final report, a number of application areas have been identified where the TACO deliverables, first of all the TACO Shell and the TACO Traceability Model, can be utilized. The report aims at facilitating such utilization, by defining the context and main issues, explaining the main aspects of the deliverables, discussing the challenges experienced in the different application domains with respect requirements management, traceability and communication and how can the TACO results contribute to solving these challenges. (au)
General method for final focus system design for circular colliders

Directory of Open Access Journals (Sweden)

Riccardo de Maria

2008-03-01

Full Text Available Colliders use final focus systems to reduce the transverse beam sizes at the interaction point in order to increase collision event rates. The maximum focal strength (gradient of the quadrupoles, and the maximum beam size in them, together limit the beam size reduction that is possible. The goal of a final focus system design is to find the best compromise between quadrupole aperture and quadrupole gradient, for the magnet technology that is used. This paper develops a design method that identifies the intrinsic limitations of a final focus system, validates the results of the method against realistic designs, and reports its application to the upgrade of the Large Hadron Collider final focus.
The application of learning theory in horse training

DEFF Research Database (Denmark)

McLean, Andrew N.; Christensen, Janne Winther

2017-01-01

The millennia-old practices of horse training markedly predate and thus were isolated from the mid-twentieth century revelation of animal learning processes. From this standpoint, the progress made in the application and understanding of learning theory in horse training is reviewed including...... on the correct application of learning theory, and safety and welfare benefits for people and horses would follow. Finally it is also proposed that the term ‘conflict theory’ be taken up in equitation science to facilitate diagnosis of training-related behaviour disorders and thus enable the emergence...
Motivation of student teachers in educational psychology course: Its relation to the quality of seminar work and final achievement

Directory of Open Access Journals (Sweden)

Melita Puklek Levpušček

2007-11-01

Full Text Available The study examines various aspects of student teachers' initial motivation for educational psychology course and the motivation's effect on student teachers' engagement in a specific academic activity and on the final course achievement. At the beginning of the academic year 2004/2005 undergraduate student teachers filled in the Motivated Strategies for Learning Questionnaire (MSLQ, Pintrich et al., 1991, the part which assesses students' motivational orientations. During the academic year students prepared and then presented to their colleagues their seminar work in groups. After each presentation, members of the group assessed the quality of their individual preparation, analyzed the quality of group work and assessed their part of the seminar presentation. Students' achievement was measured by an exam after completing the entire educational psychology course. The results showed that those students who had found the educational psychology course interesting and useful, and who had participated in the course because of extrinsic reasons prepared seminar work better and assessed their seminar presentation with higher marks than those with low motivation for the course. Students' engagement in individual study and self-assessment of seminar presentation were related to the final course grade. In addition, students' perception of the course as interesting and useful (task value independently predicted final course grade, over and above the account of previous academic achievement.
Applicability of federal and state environmental requirements to selected DOE field installations and recommendations for development of generic compliance guidance. Final report

International Nuclear Information System (INIS)

1982-01-01

This final report identifies and describes federal and state environmental requirements applicable to selected Department of Energy (DOE) nuclear field installations, establishes priorities for the requirements, determines the need for development of additional compliance guidance, and recommends development of compliance guidance for specific priority requirements. Compliance guidance developed as part of the study is summarized. The applicability of environmental requirements to 12 DOE field installations was reviewed. Five installations were examined under Task 4. They are: Nevada Test Site; Lawrence Berkeley Laboratory; Paducah Gaseous Diffusion Plant; Oak Ridge Y-12 Plant; and Los Alamos Scientific Laboratory. Seven other installations were reviewed under Task 2 and included: Idaho National Engineering Laboratory; Hanford; Savannah River Plant; Oak Ridge Gaseous Diffusion Plant; Pantex Plant; Rocky Flats Plant; and Lawrence Livermore Laboratory. This report combines results of the two tasks. The objective of the study was to identify the set of environmental requirements which are applicable to DOE field installations, track changes in the requirements, and prepare compliance guidance for important requirements and important regulatory developments as necessary. A cumulative calendar update for July 1982 represents the current status of applicable requirements. Environmental profiles of each facility, along with ambient monitoring results, are presented. Applicable federal requirements are identified. The specific applicability of federal and state requirements is detailed for each installation. Compliance guidance available from various agencies is described. Each requirement described is ranked by priority, and recommendations are made for development of additional guidance
Wavelet theory and its applications

Energy Technology Data Exchange (ETDEWEB)

Faber, V.; Bradley, JJ.; Brislawn, C.; Dougherty, R.; Hawrylycz, M.

1996-07-01

This is the final report of a three-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). We investigated the theory of wavelet transforms and their relation to Laboratory applications. The investigators have had considerable success in the past applying wavelet techniques to the numerical solution of optimal control problems for distributed- parameter systems, nonlinear signal estimation, and compression of digital imagery and multidimensional data. Wavelet theory involves ideas from the fields of harmonic analysis, numerical linear algebra, digital signal processing, approximation theory, and numerical analysis, and the new computational tools arising from wavelet theory are proving to be ideal for many Laboratory applications. 10 refs.
78 FR 21617 - Notice of Proposed Information Collection: Comment Request; Final Endorsement of Credit Instrument

Science.gov (United States)

2013-04-11

... Information Collection: Comment Request; Final Endorsement of Credit Instrument AGENCY: Office of the... Proposal: Final Endorsement of Credit Instrument. OMB Control Number, if applicable: 2502-0016. Description... Endorsement of Credit Instrument'' form is used to request to request final endorsement by HUD of the credit...
Vertical integration of basic science in final year of medical education.

Science.gov (United States)

Rajan, Sudha Jasmine; Jacob, Tripti Meriel; Sathyendra, Sowmya

2016-01-01

Development of health professionals with ability to integrate, synthesize, and apply knowledge gained through medical college is greatly hampered by the system of delivery that is compartmentalized and piecemeal. There is a need to integrate basic sciences with clinical teaching to enable application in clinical care. To study the benefit and acceptance of vertical integration of basic science in final year MBBS undergraduate curriculum. After Institutional Ethics Clearance, neuroanatomy refresher classes with clinical application to neurological diseases were held as part of the final year posting in two medical units. Feedback was collected. Pre- and post-tests which tested application and synthesis were conducted. Summative assessment was compared with the control group of students who had standard teaching in other two medical units. In-depth interview was conducted on 2 willing participants and 2 teachers who did neurology bedside teaching. Majority (>80%) found the classes useful and interesting. There was statistically significant improvement in the post-test scores. There was a statistically significant difference between the intervention and control groups' scores during summative assessment (76.2 vs. 61.8 P Vertical integration of basic science in final year was beneficial and resulted in knowledge gain and improved summative scores. The classes were found to be useful, interesting and thought to help in clinical care and application by majority of students.
Development and applications of laser spectroscopic techniques related to combustion diagnostics

International Nuclear Information System (INIS)

Alden, Marcus

2006-01-01

Thanks to features as non-intrusiveness combined with high spatial and temporal resolution, various laser diagnostic techniques have during the last decades become of utmost importance for characterization of combustion related phenomena. In the following presentation some further development of the techniques will be highlighted aiming at a) surface temperatures using Thermographic Phosphors, TP, b) species specific, spatially and temporally resolved detection of species absorbing in the IR spectral region using polarization spectroscopy and Laser-induced fluorescence, and finally c) high speed visualization using a special designed laser system in combination with a framing camera. In terms of surface thermometry, Thermographic Phosphors have been used for many years for temperature measurements on solid surfaces. We have during the last years further developed and applied this technique for temperature measurements on burning surfaces and on materials going through phase shifts, e.g. pyrolysis and droplets. The basic principle behind this technique is to apply micron size particles to the surface of interest. By exciting the TP with a short pulse UV laser (ns), the phosphorescence will exhibit a behaviour where the spectral emission as well as the temporal decay are dependent on the temperature. It is thus possible to measure the temperature both in one and two dimensions. The presentation will include basic description of the technique as well as various applications, e.g in fire science, IC engines and gasturbines. Several of the species of interest for combustion/flow diagnostics exhibit a molecular structure which inhibits the use of conventional laser-induced fluorescence for spatially and spectrally resolved measurements. We have during the last years investigated the use of excitation and detection in the infrared region of the spectrum. Here, it is possible to detect both carbonmono/dioxide, water as well as species specific hydrocarbons. The techniques
Final safety evaluation report related to the certification of the System 80+ design (Docket No. 52-002). Volume 1, Chapters 1--14

International Nuclear Information System (INIS)

1994-08-01

This final safety evaluation report (FSER) documents the technical review of the System 80+ standard design by the US Nuclear Regulatory Commission (NRC) staff. The application for the System 80+ design was submitted by Combustion Engineering, Inc., now Asea Brown Boveri-Combustion Engineering (ABB-CE) as an application for design approval and subsequent design certification pursuant to 10 CFR section 52.45. System 80+ is a pressurized water reactor with a rated power of 3914 megawatts thermal (MWt) and a design power of 3992 MWt at which accidents are analyzed. Many features of the System 80+ are similar to those of Abb-CE's System 80 design from which it evolved. Unique features of the System 80+ design included: a large spherical, steel containment; an in-containment refueling water storage tank; a reactor cavity flooding system, hydrogen ignitors, and a safety depressurization system for severe accident mitigation; a combustion gas turbine for an alternate ac source; and an advanced digitally based control room. On the basis of its evaluation and independent analyses, the NRC staff concludes that ABB-CE's application for design certification meets the requirements of Subpart B of 10 CFR Part 52 that are applicable and technically relevant to the System 80+ standard design. This document, Volume 1, contains Chapters 1 through 14 of this report
Final disposal of radioactive wastes

Energy Technology Data Exchange (ETDEWEB)

Kroebel, R [Kernforschungszentrum Karlsruhe G.m.b.H. (Germany, F.R.). Projekt Wiederaufarbeitung und Abfallbehandlung; Krause, H [Kernforschungszentrum Karlsruhe G.m.b.H. (Germany, F.R.). Abt. zur Behandlung Radioaktiver Abfaelle

1978-08-01

This paper discusses the final disposal possibilities for radioactive wastes in the Federal Republic of Germany and the related questions of waste conditioning, storage methods and safety. The programs in progress in neighbouring CEC countries and in the USA are also mentioned briefly. The autors conclude that the existing final disposal possibilities are sufficiently well known and safe, but that they could be improved still further by future development work. The residual hazard potential of radioactive wastes from fuel reprocessing after about 1000 years of storage is lower that of known inorganic core deposits.
New highly active oxygen reduction electrode for PEM fuel cell and Zn/air battery applications (NORA). Final report

Energy Technology Data Exchange (ETDEWEB)

Thiele, D.; Zuettel, A.

2008-04-15

This illustrated final report for the Swiss Federal Office of Energy (SFOE) presents the results of a project concerning a new, highly active oxygen reduction electrode for PEM fuel cell and zinc/air battery applications. The goal of this project was, according to the authors, to increase the efficiency of the oxygen reduction reaction by lowering the activation polarisation through the right choice of catalyst and by lowering the concentration polarisation. In this work, carbon nanotubes are used as support material. The use of these nanotubes grown on perovskites is discussed. Theoretical considerations regarding activation polarisation are discussed and alternatives to the use of platinum are examined. The results of experiments carried out are presented in graphical and tabular form. The paper is completed with a comprehensive list of references.
Assessment of research needs for advanced heterogeneous catalysts for energy applications. Final report: Volume 2, Topic reports

Energy Technology Data Exchange (ETDEWEB)

Mills, G.A.

1994-04-01

This report assesses the direction, technical content, and priority of research needs judged to provide the best chance of yielding new and improved heterogeneous catalysts for energy-related applications over the period of 5-20 years. It addresses issues of energy conservation, alternate fuels and feedstocks, and the economics and applications that could alleviate pollution from energy processes. Recommended goals are defined in 3 research thrusts: catalytic science, environmental protection by catalysis, and industrial catalytic applications. This study was conducted by an 11-member panel of experts from industry and academia, including one each from Japan and Europe. This volume first presents an in-depth overview of the role of catalysis in future energy technology in chapter 1; then current catalytic research is critically reviewed and research recommended in 8 topic chapters: catalyst preparation (design and synthesis), catalyst characterization (structure/function), catalyst performance testing, reaction kinetics/reactor design, catalysis for industrial chemicals, catalysis for electrical applications (clean fuels, pollution remediation), catalysis for control of exhaust emissions, and catalysts for liquid transportation fuels from petroleum, coal, residual oil, and biomass.
Final Report for Project "Framework Application for Core-Edge Transport Simulations (FACETS)"

Energy Technology Data Exchange (ETDEWEB)

Estep, Donald [Colorado State Univ., Fort Collins, CO (United States)

2014-01-17

This is the final report for the Colorado State University Component of the FACETS Project. FACETS was focused on the development of a multiphysics, parallel framework application that could provide the capability to enable whole-device fusion reactor modeling and, in the process, the development of the modeling infrastructure and computational understanding needed for ITER. It was intended that FACETS be highly flexible, through the use of modern computational methods, including component technology and object oriented design, to facilitate switching from one model to another for a given aspect of the physics, and making it possible to use simplified models for rapid turnaround or high-fidelity models that will take advantage of the largest supercomputer hardware. FACETS was designed in a heterogeneous parallel context, where different parts of the application can take advantage through parallelism based on task farming, domain decomposition, and/or pipelining as needed and applicable. As with all fusion simulations, an integral part of the FACETS project was treatment of the coupling of different physical processes at different scales interacting closely. A primary example for the FACETS project is the coupling of existing core and edge simulations, with the transport and wall interactions described by reduced models. However, core and edge simulations themselves involve significant coupling of different processes with large scale differences. Numerical treatment of coupling is impacted by a number of factors including, scale differences, form of information transferred between processes, implementation of solvers for different codes, and high performance computing concerns. Operator decomposition involving the computation of the individual processes individually using appropriate simulation codes and then linking/synchronizing the component simulations at regular points in space and time, is the defacto approach to high performance simulation of multiphysics
Optimization of Finite-Differencing Kernels for Numerical Relativity Applications

Directory of Open Access Journals (Sweden)

Roberto Alfieri

2018-05-01

Full Text Available A simple optimization strategy for the computation of 3D finite-differencing kernels on many-cores architectures is proposed. The 3D finite-differencing computation is split direction-by-direction and exploits two level of parallelism: in-core vectorization and multi-threads shared-memory parallelization. The main application of this method is to accelerate the high-order stencil computations in numerical relativity codes. Our proposed method provides substantial speedup in computations involving tensor contractions and 3D stencil calculations on different processor microarchitectures, including Intel Knight Landing.

32 CFR 767.9 - Content of permit holder's final report.

Science.gov (United States)

2010-07-01

... RULES APPLICATION GUIDELINES FOR ARCHEOLOGICAL RESEARCH PERMITS ON SHIP AND AIRCRAFT WRECKS UNDER THE.... The permit holder's final report shall include the following: (a) A site history and a contextual...
A PLC generic requirements and specification for safety-related applications in nuclear power plants

International Nuclear Information System (INIS)

Han, Jea Bok; Lee, C. K.; Lee, D. Y.

2001-12-01

This report presents the requirements and specification to be applied to the generic qualification of programmable Logic Controller(PLC), which is being developed as part of the KNICS project, 'Development of the Digital Reactor Safety Systems' of which purpose is the application to safety-related instrumentation and control systems in nuclear power plants. This report defines the essential and critical characteristics that shall be included as part of a PLC design for safety-related application. The characteristics include performance, reliability, accuracy, the overall response time from an input to the PLC exceeding it trip condition to the resulting outputs, and the specification of processors and memories in digital controller. It also specifies the quality assurance process for software development, dealing with executive software, firmware, application software tools for developing the application software, and human machine interface(HMI). In addition, this report reviews the published standards and guidelines that are required for the PLC development and the quality assurance processes such as environment requirements, seismic withstand requirements, EMI/RFI withstand requirements, and isolation test
Random measures, theory and applications

CERN Document Server

Kallenberg, Olav

2017-01-01

Offering the first comprehensive treatment of the theory of random measures, this book has a very broad scope, ranging from basic properties of Poisson and related processes to the modern theories of convergence, stationarity, Palm measures, conditioning, and compensation. The three large final chapters focus on applications within the areas of stochastic geometry, excursion theory, and branching processes. Although this theory plays a fundamental role in most areas of modern probability, much of it, including the most basic material, has previously been available only in scores of journal articles. The book is primarily directed towards researchers and advanced graduate students in stochastic processes and related areas.
Final argument relating to the Canadian nuclear power program

International Nuclear Information System (INIS)

Robertson, J.A.L.

1978-05-01

This report is the second brief, and one of a number of documents, submitted by Atomic Energy of Canada Limited (AECL) to the Ontario Royal Commission on Electric Power Planning. It is intended to update the original brief (AECL--5800) with respect to those matters that emerged during the course of the hearings and which had not been fully anticipated in that brief, as well as to summarize the AECL position on the various issues. To enable it to qualify as a ''final argument'' it contains only evidence or material that has been presented to the Royal Commission and is provided with marginal notations identifying the source of each section. It is AECL's position that the Canadian nuclear power program provides a safe, proven and efficient means of making a needed contribution to electricity supply, while strengthening the economy through the deployment of indigenous technology and resources. (author)
Final focus systems for linear colliders

International Nuclear Information System (INIS)

Helm, R.; Irwin, J.

1992-08-01

Final focus systems for linear colliders present many exacting challenges in beam optics, component design, and beam quality. Efforts to resolve these problems as they relate to a new generation of linear colliders are under way at several laboratories around the world. We will outline criteria for final focus systems and discuss the current state of understanding and resolution of the outstanding problems. We will discuss tolerances on alignment, field quality and stability for optical elements, and the implications for beam parameters such as emittance, energy spread, bunch length, and stability in position and energy. Beam-based correction procedures, which in principle can alleviate many of the tolerances, will be described. Preliminary results from the Final Focus Test Beam (FFTB) under construction at SLAC will be given. Finally, we mention conclusions from operating experience at the Stanford Linear Collider (SLC)
Final focus systems for linear colliders

International Nuclear Information System (INIS)

Helm, R.; Irwing, J.

1992-01-01

Final focus systems for linear colliders present many exacting challenges in beam optics, component design, and beam quality. Efforts to resolve these problems as they relate to a new generation of linear colliders are under way at several laboratories around the world. We outline criteria for final focus systems and discuss the current state of understanding and resolution of the outstanding problems. We discuss tolerances on alignment, field quality and stability for optical elements, and the implications for beam parameters such as emittance, energy spread , bunch length, and stability in position and energy. Beam-based correction procedures, which in principle can alleviate many of the tolerances, are described. Preliminary results from the Final Focus Test Beam (FFTB) under construction at SLAC are given. Finally, we mention conclusions from operating experience at the Stanford Linear Collider (SLC). (Author) 16 refs., 4 tabs., 6 figs
Topological vector spaces and their applications

CERN Document Server

Bogachev, V I

2017-01-01

This book gives a compact exposition of the fundamentals of the theory of locally convex topological vector spaces. Furthermore it contains a survey of the most important results of a more subtle nature, which cannot be regarded as basic, but knowledge which is useful for understanding applications. Finally, the book explores some of such applications connected with differential calculus and measure theory in infinite-dimensional spaces. These applications are a central aspect of the book, which is why it is different from the wide range of existing texts on topological vector spaces. In addition, this book develops differential and integral calculus on infinite-dimensional locally convex spaces by using methods and techniques of the theory of locally convex spaces. The target readership includes mathematicians and physicists whose research is related to infinite-dimensional analysis.
Thermoelectric applications as related to biomedical engineering for NASA Johnson Space Center

Energy Technology Data Exchange (ETDEWEB)

Kramer, C D

1997-07-01

This paper presents current NASA biomedical developments and applications using thermoelectrics. Discussion will include future technology enhancements that would be most beneficial to the application of thermoelectric technology. A great deal of thermoelectric applications have focused on electronic cooling. As with all technological developments within NASA, if the application cannot be related to the average consumer, the technology will not be mass-produced and widely available to the public (a key to research and development expenditures and thermoelectric companies). Included are discussions of thermoelectric applications to cool astronauts during launch and reentry. The earth-based applications, or spin-offs, include such innovations as tank and race car driver cooling, to cooling infants with high temperatures, as well as, the prevention of hair loss during chemotherapy. In order to preserve the scientific value of metabolic samples during long-term space missions, cooling is required to enable scientific studies. Results of one such study should provide a better understanding of osteoporosis and may lead to a possible cure for the disease. In the space environment, noise has to be kept to a minimum. In long-term space applications such as the International Space Station, thermoelectric technology provides the acoustic relief and the reliability for food, as well as, scientific refrigeration/freezers. Applications and future needs are discussed as NASA moves closer to a continued space presence in Mir, International Space Station, and Lunar-Mars Exploration.
Uncertain Fuzzy Preference Relations and Their Applications

CERN Document Server

Gong, Zaiwu; Yao, Tianxiang

2013-01-01

On the basis of fuzzy sets and some of their relevant generalizations, this book systematically presents the fundamental principles and applications of group decision making under different scenarios of preference relations. By using intuitionistic knowledge as the field of discourse, this work investigates by utilizing innovative research means the fundamental principles and methods of group decision making with various different intuitionistic preferences: Mathematical reasoning is employed to study the consistency of group decision making; Methods of fusing information are applied to look at the aggregation of multiple preferences; Techniques of soft computing and optimization are utilized to search for satisfactory decision alternatives. Each chapter follows the following structurally clear format of presentation: literature review, development of basic theory, verification and reasoning of principles , construction of models and computational schemes, and numerical examples, which ...
Nicotinamide-NAD sequence: redox process and related behavior, behavior and properties of intermediate and final products

International Nuclear Information System (INIS)

Elving, P.J.; Schmakel, C.O.; Santhanam, K.S.V.

1976-01-01

Illustrations of the application of analytical chemical techniques to the study of chemical phenomena are given. In particular, electrochemical techniques and methodology and, to a lesser extent, spectrophotometry were used to investigate the solution behavior, adsorption, redox processes including coupled chemical reactions, and allied aspects of biologically significant compounds and of their intermediate and final redox products, e.g., the behavior of the free radicals produced by initial one-electron processes. This approach is illustrated by the consideration of the behavior in aqueous and nonaqueous media of a sequence of compounds ranging from nicotinamide (3-carbamoylpyridine) to NAD + and NADP + ; the latter compounds function as coenzymes for the pyridinoproteins which are principal components in the Krebs citric acid cycle and in the electron transport chain in biological redox reactions. The discussion is presented under the following section headings: interpretation of electrochemical behavior; mechanistic patterns; kinetic aspects of charge-transfer and chemical reactions; correlation with theoretically calculated parameters; and, mechanisms of biological oxidation-reduction reactions. The use of pulse radiolysis, chronopotentiometric, and cyclic voltammetric methods in studies on free radical dimerization rates is reviewed in the discussion of the kinetic aspects of charge-transfer and chemical reactions. (188 references)
Application of finite element method in mechanical design of automotive parts

Science.gov (United States)

Gu, Suohai

2017-09-01

As an effective numerical analysis method, finite element method (FEM) has been widely used in mechanical design and other fields. In this paper, the development of FEM is introduced firstly, then the specific steps of FEM applications are illustrated and the difficulties of FEM are summarized in detail. Finally, applications of FEM in automobile components such as automobile wheel, steel plate spring, body frame, shaft parts and so on are summarized, compared with related research experiments.
General relativity the most beautiful of theories : applications and trends after 100 years

CERN Document Server

2015-01-01

Generalising Newton's law of gravitation, general relativity is one of the pillars of modern physics. On the occasion of general relativity's centennial, leading scientists in the different branches of gravitational research review the history and recent advances in the main fields of applications of the theory, which was referred to by Lev Landau as “the most beautiful of the existing physical theories”.
Inspection of Nuclear Power Plant Structures - Overview of Methods and Related Applications

International Nuclear Information System (INIS)

Naus, Dan J.

2009-01-01

The objectives of this limited study were to provide an overview of the methods that are available for inspection of nuclear power plant reinforced concrete and metallic structures, and to provide an assessment of the status of methods that address inspection of thick, heavily-reinforced concrete and inaccessible areas of the containment metallic pressure boundary. In meeting these objectives a general description of nuclear power plant safety-related structures was provided as well as identification of potential degradation factors, testing and inspection requirements, and operating experience; methods for inspection of nuclear power plant reinforced concrete structures and containment metallic pressure boundaries were identified and described; and applications of nondestructive evaluation methods specifically related to inspection of thick-section reinforced concrete structures and inaccessible portions of containment metallic pressure boundaries were summarized. Recommendations are provided on utilization of test article(s) to further advance nondestructive evaluation methods related to thick-section, heavily-reinforced concrete and inaccessible portions of the metallic pressure boundary representative of nuclear power plant containments. Conduct of a workshop to provide an update on applications and needed developments for nondestructive evaluation of nuclear power plant structures would also be of benefit.
Inspection of Nuclear Power Plant Structures - Overview of Methods and Related Applications

Energy Technology Data Exchange (ETDEWEB)

Naus, Dan J [ORNL

2009-05-01

The objectives of this limited study were to provide an overview of the methods that are available for inspection of nuclear power plant reinforced concrete and metallic structures, and to provide an assessment of the status of methods that address inspection of thick, heavily-reinforced concrete and inaccessible areas of the containment metallic pressure boundary. In meeting these objectives a general description of nuclear power plant safety-related structures was provided as well as identification of potential degradation factors, testing and inspection requirements, and operating experience; methods for inspection of nuclear power plant reinforced concrete structures and containment metallic pressure boundaries were identified and described; and applications of nondestructive evaluation methods specifically related to inspection of thick-section reinforced concrete structures and inaccessible portions of containment metallic pressure boundaries were summarized. Recommendations are provided on utilization of test article(s) to further advance nondestructive evaluation methods related to thick-section, heavily-reinforced concrete and inaccessible portions of the metallic pressure boundary representative of nuclear power plant containments. Conduct of a workshop to provide an update on applications and needed developments for nondestructive evaluation of nuclear power plant structures would also be of benefit.
Relation between initial and minimum final white dwarf mass for Population I stars

Energy Technology Data Exchange (ETDEWEB)

Mazzitelli, I.; Dantona, F.

1986-12-01

The evolutionary paths for Population I stars having initial masses 1, 2.5, 3, 4, and 5 solar masses were computed from the homogeneous main sequence to the onset of the first major thermal pulse to evaluate the minimum mass and the chemical stratification of the remnant white dwarf (WD) associated with each parent mass. The helium flash phase was followed in detail for a 2.5 solar masses star, whereas for the 1 solar mass star the flash was bypassed, and the models at the beginning of the steady central helium burning phase were obtained by means of a scaling procedure upon the properly computed total and core masses. The results show that for a parent ranging between 1-3 solar masses the core mass at the first thermal pulse ranges only from 0.64-0.69 solar mass. If some very fast mass-loss mechanism is triggered in connection with the early stages of the thermal pulse phase, as suggested by the observed deficiency of asymptotic giant branch stars, the relation between final and initial mass is almost flat at least up to an initial mass of 3 solar masses, and the mass spectrum of the WDs is narrow and heavily peaked around 0.65 solar mass. 53 references.
Relation between initial and minimum final white dwarf mass for Population I stars

International Nuclear Information System (INIS)

Mazzitelli, I.; Dantona, F.; CNR, Istituto di Astrofisica Spaziale, Frascati; Roma, Osservatorio Astronomico, Rome, Italy)

1986-01-01

The evolutionary paths for Population I stars having initial masses 1, 2.5, 3, 4, and 5 solar masses were computed from the homogeneous main sequence to the onset of the first major thermal pulse to evaluate the minimum mass and the chemical stratification of the remnant white dwarf (WD) associated with each parent mass. The helium flash phase was followed in detail for a 2.5 solar masses star, whereas for the 1 solar mass star the flash was bypassed, and the models at the beginning of the steady central helium burning phase were obtained by means of a scaling procedure upon the properly computed total and core masses. The results show that for a parent ranging between 1-3 solar masses the core mass at the first thermal pulse ranges only from 0.64-0.69 solar mass. If some very fast mass-loss mechanism is triggered in connection with the early stages of the thermal pulse phase, as suggested by the observed deficiency of asymptotic giant branch stars, the relation between final and initial mass is almost flat at least up to an initial mass of 3 solar masses, and the mass spectrum of the WDs is narrow and heavily peaked around 0.65 solar mass. 53 references
Electromechanical properties of superconductors for DOE/OFE applications. Final report

International Nuclear Information System (INIS)

Ekin, J.W.; Bray, S.L.

1998-01-01

In many superconductor applications, especially large magnets, the superconductor is required to perform while under the influence of strong mechanical forces. These forces are commonly due to residual fabrication stress, differential thermal contraction of dissimilar materials, and electromagnetic forces generated within an energized magnet coil. Thorough knowledge of a superconductor's electrical performance under the influence of these forces (electromechanical properties) is required for successful magnet engineering. This report presents results of research conducted during the period from august 1993 through March 1997 on the electromechanical properties of superconductors for DOE/OFE fusion applications
SATA II - Stochastic Algebraic Topology and Applications

Science.gov (United States)

2017-01-30

AFRL-AFOSR-UK-TR-2017-0018 SATA II - Stochastic Algebraic Topology and Applications 150032 Robert Adler TECHNION ISRAEL INSTITUTE OF TECHNOLOGY Final...REPORT TYPE Final 3. DATES COVERED (From - To) 15 Dec 2014 to 14 Dec 2016 4. TITLE AND SUBTITLE SATA II - Stochastic Algebraic Topology and Applications... Topology and Applications Continuation of, and associated with SATA: Stochastic Algebraic Topology and Applications FA8655-11-1-3039, 09/1/2011–08/31/2014
Facilitating relative comparisons of health impacts from postulated accidents in environmental impact statements

International Nuclear Information System (INIS)

Mueller, C.J.

1996-01-01

Current US Department of Energy (DOE) guidance on the performance of accident analyses supported an environmental impact statement (EIS) stresses a graded approach that emphasizes the most important risks, calls for the evaluation of frequencies as well as consequences for severe accident scenarios, and discourages the use of bounding analyses that confound risk comparisons among EIS alternatives. This paper discusses methods in probabilistic risk analysis that were developed and applied in defining accidents and generating radiological source terms for the DOE Draft Waste Management Programmatic Environmental Impact Statement (WM PEIS); publication of the Final WM PEIS is due in late summer 1996. The strengths and shortcomings of the cited probabilistic risk analysis methods used to evaluate facility accidents are addressed, both as they relate to the WM PEIS and as they relate to more general EIS applications. Key guidance is discussed that was developed by DOE and used in shaping the techniques cited herein for application in an EIS. Related perceptions on accidents observed from the public comment process for the WM PEIS are cited. Finally, recommendations are made on the basis of needs as well as lessons learned in implementing the accident analysis for the WM PEIS
A Review of Lawsuits Related to Point-of-Care Emergency Ultrasound Applications

Directory of Open Access Journals (Sweden)

Stolz, Lori

2014-12-01

Full Text Available Introduction: New medical technology brings the potential of lawsuits related to the usage of that new technology. In recent years the use of point-of-care (POC ultrasound has increased rapidly in the emergency department (ED. POC ultrasound creates potential legal risk to an emergency physician (EP either using or not using this tool. The aim of this study was to quantify and characterize reported decisions in lawsuits related to EPs performing POC ultrasound. Methods: We conducted a retrospective review of all United States reported state and federal cases in the Westlaw database. We assessed the full text of reported cases between January 2008 and December 2012. EPs with emergency ultrasound fellowship training reviewed the full text of each case. Cases were included if an EP was named, the patient encounter was in the emergency department, the interpretation or failure to perform an ultrasound was a central issue and the application was within the American College of Emergency Physician (ACEP ultrasound core applications. In order to assess deferred risk, cases that involved ultrasound examinations that could have been performed by an EP but were deferred to radiology were included. Results: We identified five cases. All reported decisions alleged a failure to perform an ultrasound study or a failure to perform it in a timely manner. All studies were within the scope of emergency medicine and were ACEP emergency ultrasound core applications. A majority of cases (n=4 resulted in a patient death. There were no reported cases of failure to interpret or misdiagnoses. Conclusion: In a five-year period from January 2008 through December 2012, five malpractice cases involving EPs and ultrasound examinations that are ACEP core emergency ultrasound applications were documented in the Westlaw database. All cases were related to failure to perform an ultrasound study or failure to perform a study in a timely manner and none involved failure to

On final states of two-dimensional decaying turbulence

NARCIS (Netherlands)

Yin, Z.

2004-01-01

Numerical and analytical studies of final states of two-dimensional (2D) decaying turbulence are carried out. The first part of this work is trying to give a definition for final states of 2D decaying turbulence. The functional relation of ¿-¿, which is frequently adopted as the characterization of
23 CFR 771.125 - Final environmental impact statements.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Final environmental impact statements. 771.125 Section... ENVIRONMENT ENVIRONMENTAL IMPACT AND RELATED PROCEDURES § 771.125 Final environmental impact statements. (a)(1..., economic, or environmental impacts of the action may need to be more fully explored; (iii) the impacts of...
Nuclear medicine and related radionuclide applications in developing countries

International Nuclear Information System (INIS)

1986-01-01

The Symposium presentations were divided into sessions devoted to the following topics: Radioimmunoassay and related techniques (4 papers and 4 poster presentations); Radionuclide applications in the diagnosis of parasitic diseases (7 papers and 2 posters); Instrumentation (6 papers and 4 posters); Clinical nuclear medicine: liver, bones, thyroid, cardiovascular system, lungs, kidneys, brain (23 papers and 15 posters); Organization of nuclear medicine services in the developing countries (9 papers and 5 posters); Training in nuclear medicine (4 papers) and the panel discussion. Future of Nuclear Medicine in the developing countries. A separate abstract was prepared for each of these papers and posters
Consolidated guidance about materials licenses: Program-specific guidance about portable gauge licenses. Final report; Volume 1

Energy Technology Data Exchange (ETDEWEB)

Vacca, P.C.; Whitten, J.E.; Pelchat, J.M.; Arredondo, S.A.; Matson, E.R.; Lewis, S.H.; Collins, D.J.; Santiago, P.A. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Industrial and Medical Nuclear Safety; Tingle, W. [Dept. of Environment, Health, and Natural Resources, Raleigh, NC (United States). Div. of Radiation Protection

1997-05-01

As part of its redesign of the materials licensing process, NRC is consolidating and updating numerous guidance documents into a single comprehensive repository as described in NUREG-1539 and draft NUREG-1541. NUREG-1556, Vol. 1, is the first program-specific guidance developed for the new process and will serve as a template for subsequent program-specific guidance. This document is intended for use by applicants, licensees, and NRC staff and will also be available to Agreement States. This document supersedes the guidance previously found in draft Regulatory Guide DG-0008, ``Applications for the Use of Sealed Sources in Portable Gauging Devices,`` and in NMSs Policy and guidance Directive 2-07, ``Standard Review Plan for Applications for Use of Sealed Sources in Portable Gauging Devices.`` This final report takes a more risk-informed, performance-based approach to licensing portable gauges, and reduces the information(amount and level of detail) needed to support an application to use these devices. It incorporates many suggests submitted during the comment period on draft NUREG-1556, Volume 1. When published, this final report should be used in preparing portable gauge license applications. NRC staff will use this final report in reviewing these applications.
Consolidated guidance about materials licenses: Program-specific guidance about portable gauge licenses. Final report; Volume 1

International Nuclear Information System (INIS)

Vacca, P.C.; Whitten, J.E.; Pelchat, J.M.; Arredondo, S.A.; Matson, E.R.; Lewis, S.H.; Collins, D.J.; Santiago, P.A.; Tingle, W.

1997-05-01

As part of its redesign of the materials licensing process, NRC is consolidating and updating numerous guidance documents into a single comprehensive repository as described in NUREG-1539 and draft NUREG-1541. NUREG-1556, Vol. 1, is the first program-specific guidance developed for the new process and will serve as a template for subsequent program-specific guidance. This document is intended for use by applicants, licensees, and NRC staff and will also be available to Agreement States. This document supersedes the guidance previously found in draft Regulatory Guide DG-0008, ''Applications for the Use of Sealed Sources in Portable Gauging Devices,'' and in NMSs Policy and guidance Directive 2-07, ''Standard Review Plan for Applications for Use of Sealed Sources in Portable Gauging Devices.'' This final report takes a more risk-informed, performance-based approach to licensing portable gauges, and reduces the information(amount and level of detail) needed to support an application to use these devices. It incorporates many suggests submitted during the comment period on draft NUREG-1556, Volume 1. When published, this final report should be used in preparing portable gauge license applications. NRC staff will use this final report in reviewing these applications
Legal instruments related to the application of safeguards

International Nuclear Information System (INIS)

Rockwood, Laura

2001-01-01

The legal framework of IAEA safeguards consists of a number of elements, not at all of which are documents. These elements include the Statute of the IAEA; treaties and supply agreements calling for verification of nonproliferation undertakings; the basic safeguards documents, the safeguards agreements themselves, along with the relevant protocols and subsidiary arrangements; and finally, the decisions, interpretations and practices of the Board of Governors. After a discussion of these elements the major differences between the various types of IAEA safeguards agreements are outlined. Finally the procedures involved in the initiation, negotiation, conclusion and amendment of safeguards agreements are described. (author)
Joint application of AI techniques, PRA and disturbance analysis methodology to problems in the maintenance and design of nuclear power plants. Final report

Energy Technology Data Exchange (ETDEWEB)

Okrent, D.

1989-03-01

This final report summarizes the accomplishments of a two year research project entitled ``Joint Application of Artificial Intelligence Techniques, Probabilistic Risk Analysis, and Disturbance Analysis Methodology to Problems in the Maintenance and Design of Nuclear Power Plants. The objective of this project is to develop and apply appropriate combinations of techniques from artificial intelligence, (AI), reliability and risk analysis and disturbance analysis to well-defined programmatic problems of nuclear power plants. Reactor operations issues were added to those of design and maintenance as the project progressed.
Safety Evaluation Report related to the final design approval of the GESSAR II BWR/6 Nuclear Island design, Docket No. 50-447

International Nuclear Information System (INIS)

1983-04-01

The Safety Evaluation Report for the application filed by General Electric Company for the Final Design Approval for the General Electric Standard Safety Analysis Report (GESSAR II FSAR) has been prepared by the Office of Nuclear Reactor Regulation of the Nuclear Regulatory Commission. This report summarizes the results of the staff's safety review of the GESSAR II BWR/6 Nuclear Island Design. Subject to favorable resolution of items discussed in the Safety Evaluation Report, the staff concludes that the facilities referencing GESSAR II, subject to approval of the balance-of-plant design, can conform with the provisions of the Act and the regulations of the Nuclear Regulatory Commission
Evaluation of the Field Performance of Residential Fuel Cells: Final Report

Energy Technology Data Exchange (ETDEWEB)

Torrero, E.; McClelland, R.

2004-05-01

Distributed generation has attracted significant interest from rural electric cooperatives and their customers. Cooperatives have a particular nexus because of inherently low customer density, growth patterns at the end of long lines, and an influx of customers and high-tech industries seeking to diversify out of urban environments. Fuel cells are considered a particularly interesting DG candidate for these cooperatives because of their power quality, efficiency, and environmental benefits. The National Rural Electric Cooperative Association Cooperative Research Network residential fuel cell program demonstrated RFC power plants and assessed related technical and application issues. This final subcontract report is an assessment of the program's results. This 3-year program leveraged Department of Energy (DOE) and National Renewable Energy Laboratory (NREL) funding.
RA radiological characterization database application

International Nuclear Information System (INIS)

Steljic, M.M; Ljubenov, V.Lj. . E-mail address of corresponding author: milijanas@vin.bg.ac.yu; Steljic, M.M.)

2005-01-01

Radiological characterization of the RA research reactor is one of the main activities in the first two years of the reactor decommissioning project. The raw characterization data from direct measurements or laboratory analyses (defined within the existing sampling and measurement programme) have to be interpreted, organized and summarized in order to prepare the final characterization survey report. This report should be made so that the radiological condition of the entire site is completely and accurately shown with the radiological condition of the components clearly depicted. This paper presents an electronic database application, designed as a serviceable and efficient tool for characterization data storage, review and analysis, as well as for the reports generation. Relational database model was designed and the application is made by using Microsoft Access 2002 (SP1), a 32-bit RDBMS for the desktop and client/server database applications that run under Windows XP. (author)
Final safety evaluation report related to the certification of the System 80{sup +} design (Docket No. 52-002). Volume 1, Chapters 1--14

Energy Technology Data Exchange (ETDEWEB)

1994-08-01

This final safety evaluation report (FSER) documents the technical review of the System 80+ standard design by the US Nuclear Regulatory Commission (NRC) staff. The application for the System 80+ design was submitted by Combustion Engineering, Inc., now Asea Brown Boveri-Combustion Engineering (ABB-CE) as an application for design approval and subsequent design certification pursuant to 10 CFR {section} 52.45. System 80+ is a pressurized water reactor with a rated power of 3914 megawatts thermal (MWt) and a design power of 3992 MWt at which accidents are analyzed. Many features of the System 80+ are similar to those of Abb-CE`s System 80 design from which it evolved. Unique features of the System 80+ design included: a large spherical, steel containment; an in-containment refueling water storage tank; a reactor cavity flooding system, hydrogen ignitors, and a safety depressurization system for severe accident mitigation; a combustion gas turbine for an alternate ac source; and an advanced digitally based control room. On the basis of its evaluation and independent analyses, the NRC staff concludes that ABB-CE`s application for design certification meets the requirements of Subpart B of 10 CFR Part 52 that are applicable and technically relevant to the System 80+ standard design. This document, Volume 1, contains Chapters 1 through 14 of this report.
On application of mean frequency for seismic differentiation

International Nuclear Information System (INIS)

Dargahi-Noubary, G.R.

1987-03-01

A simple discriminant is introduced for differentiation of the underground nuclear explosion and natural earthquake. Here instead of magnitude which is related to the energy consideration is given to the mean frequency which is related to zero crossings and carries sufficient information concerning the energy. It is shown that this discriminant can be used in the absence of the facilities such as digitizer and computer. Finally, application of the proposed procedure is demonstrated using data from some underground and atmospheric explosions. (author). 12 refs, 1 fig., 1 tab
Einstein's General Theory of Relativity-with Modern Applications in Cosmology

International Nuclear Information System (INIS)

Barrabes, C

2008-01-01

composed of vacuum energy. There one finds, after the description of the Einstein static universe and the de Sitter solution, sections on inflation, on the Friedman-LemaItre model and on models with quintessence and dark energy. This chapter ends with sections on cosmic density perturbations, temperature fluctations in the cosmic microwave background and on the history of our universe. With an additional chapter on anisotropic and homogeneous universes, part IV appears to be a very good and complete introduction to the basic and classical (i.e. non-quantum) elements of cosmology. In part V some advanced tools, such as Lie groups and the Lagrangian and Hamiltonian formalism are introduced and applied to cosmology. Also part V contains a chapter on the extrinsic curvature formalism for surface layers and its application to the recently introduced braneworld models. Finally it is a pleasant surprise to find an introduction to the Kaluza-Klein theory as the last chapter of part V. This book by Gron and Hervik certainly has its place in any good library. It covers most of the classical aspects of the theory of general relativity. The authors have made the effort to discuss many observational aspects and to illustrate the different chapters with many problems. One might regret that the authors' style is generally rather terse and not enough space is always reserved for explanation of physical concepts and for motivations of the theory (for instance, why curvature is so fundamental). This book would be most appropriate for graduate students and I will definitely recommend it as a reference textbook as well as a useful complement to other textbooks on general relativity. (book review)
Basic Program Elements for Federal employee Occupational Safety and Health Programs and related matters; Subpart I for Recordkeeping and Reporting Requirements. Final rule.

Science.gov (United States)

2013-08-05

OSHA is issuing a final rule amending the Basic Program Elements to require Federal agencies to submit their occupational injury and illness recordkeeping information to the Bureau of Labor Statistics (BLS) and OSHA on an annual basis. The information, which is already required to be created and maintained by Federal agencies, will be used by BLS to aggregate injury and illness information throughout the Federal government. OSHA will use the information to identify Federal establishments with high incidence rates for targeted inspection, and assist in determining the most effective safety and health training for Federal employees. The final rule also interprets several existing basic program elements in our regulations to clarify requirements applicable to Federal agencies, amends the date when Federal agencies must submit to the Secretary of Labor their annual report on occupational safety and health programs, amends the date when the Secretary of Labor must submit to the President the annual report on Federal agency safety and health, and clarifies that Federal agencies must include uncompensated volunteers when reporting and recording occupational injuries and illnesses.
Quantum Theory finally reconciled with Special Relativity

OpenAIRE

Tommasini, Daniele

2001-01-01

In 1935 Einstein, Podolsky and Rosen (EPR) pointed out that Quantum Mechanics apparently implied some mysterious, instantaneous action at a distance. This paradox is supposed to be related to the probabilistic nature of the theory, but since deterministic alternatives involving "Hidden Variables" hardly agree with the experiments, the scientific community is now accepting this ``quantum nonlocality" as if it were a reality. However, I have argued recently that Quantum Electrodynamics is free ...
Opportunities and limitations related to the application of plant-derived lipid molecular proxies in soil science

Directory of Open Access Journals (Sweden)

B. Jansen

2017-11-01

Full Text Available The application of lipids in soils as molecular proxies, also often referred to as biomarkers, has dramatically increased in the last decades. Applications range from inferring changes in past vegetation composition, climate, and/or human presence to unraveling the input and turnover of soil organic matter (SOM. The molecules used are extractable and non-extractable lipids, including ester-bound lipids. In addition, the carbon or hydrogen isotopic composition of such molecules is used. While holding great promise, the application of soil lipids as molecular proxies comes with several constraining factors, the most important of which are (i variability in the molecular composition of plant-derived organic matter both internally and between individual plants, (ii variability in (the relative contribution of input pathways into the soil, and (iii the transformation and/or (selective degradation of (some of the molecules once present in the soil. Unfortunately, the information about such constraining factors and their impact on the applicability of molecular proxies is fragmented and scattered. The purpose of this study is to provide a critical review of the current state of knowledge with respect to the applicability of molecular proxies in soil science, specifically focusing on the factors constraining such applicability. Variability in genetic, ontogenetic, and environmental factors influences plant n-alkane patterns in such a way that no unique compounds or specific molecular proxies pointing to, for example, plant community differences or environmental influences, exist. Other components, such as n-alcohols, n-fatty acids, and cutin- and suberin-derived monomers, have received far less attention in this respect. Furthermore, there is a high diversity of input pathways offering both opportunities and limitations for the use of molecular proxies at the same time. New modeling approaches might offer a possibility to unravel such mixed input
Increasing Prediction the Original Final Year Project of Student Using Genetic Algorithm

Science.gov (United States)

Saragih, Rijois Iboy Erwin; Turnip, Mardi; Sitanggang, Delima; Aritonang, Mendarissan; Harianja, Eva

2018-04-01

Final year project is very important forgraduation study of a student. Unfortunately, many students are not seriouslydidtheir final projects. Many of studentsask for someone to do it for them. In this paper, an application of genetic algorithms to predict the original final year project of a studentis proposed. In the simulation, the data of the final project for the last 5 years is collected. The genetic algorithm has several operators namely population, selection, crossover, and mutation. The result suggest that genetic algorithm can do better prediction than other comparable model. Experimental results of predicting showed that 70% was more accurate than the previous researched.
Commercial applications of inertial confinement fusion

International Nuclear Information System (INIS)

Booth, L.A.; Frank, T.G.

1977-05-01

This report describes the fundamentals of inertial-confinement fusion, some laser-fusion reactor (LFR) concepts, and attendant means of utilizing the thermonuclear energy for commercial electric power generation. In addition, other commercial energy-related applications, such as the production of fissionable fuels, of synthetic hydrocarbon-based fuels, and of process heat for a variety of uses, as well as the environmental and safety aspects of fusion energy, are discussed. Finally, the requirements for commercialization of laser fusion technologies are described
The Mobile Application Social Mode of Manufacturing Enterprise under the Environment of Mobile Internet

Directory of Open Access Journals (Sweden)

Zuo Cen

2017-01-01

Full Text Available The rapid development of the mobile internet, mobile communication technology and mobile terminal stimulate demand of mobile application in manufacturing enterprises, which makes the enterprise implement the mobile ERP. The implementation of mobile ERP changes the internal application management of manufacturing enterprises to social applications. We analyse the driving factors of implementing the mobile application social mode considering the complexity of organization relations and business processes of manufacturing enterprise. And then the mobile application social mode of the manufacturing enterprise is built based on mobile internet. Finally, we present the management strategies of the mobile application social network to provide references for the manufacturing enterprise.
Final report for the 'Melt-Vessel Interactions' Project. European Union R and TD Program 4th Framework. MVI project final research report

International Nuclear Information System (INIS)

Sehgal, B.R.; Dinh, T.N.; Nourgaliev, R.R.; Bui, V.A.; Green, J.; Kolb, G.; Karbojian, A.; Theerthan, S.A.; Gubaidulline, A.; Bonnet, J.M.; Rouge, S.; Narcoux, M.; Liegeois, A.; Turland, B.D.; Dobson, G.P.; Siccama, A.; Ikonen, K.; Parozzi, F.; Kolev, N.; Caira, M.

1999-04-01

The Melt Vessel Interaction (MVI) project is concerned with the consequences of the interactions that a core melt, generated during a postulated severe accident in a light water reactor, may have with the pressure vessel. In particular, the issues concerned with the failure of the vessel bottom head are the focus of the research. The specific objectives of the project are to obtain data and develop validated models, which could be applied to prototypic plants, and accident conditions, for resolution of issues related to the melt vessel interactions. The project work has been performed by nine partners having varied responsibility. The work included a large number of experiments, with simulant materials, whose observations and results are employed, respectively, to understand the physical mechanisms and to develop validated models. Applications to the prototypic geometry and conditions have also been performed. This report is volume 1 of the Final Report for the Project, in which a summary of the progress achieved in the experimental program is provided. We have, however, included some aspects of the modeling activities. Volume 2 of the Final report describes the progress achieved in the modeling program. The progress achieved in the experimental and modeling parts of the Project has led to the resolution of some of the issues of melt vessel interaction. Considerable progress was also achieved towards resolution of the remaining issues

Application status and performance analysis of robot in nuclear power plants

International Nuclear Information System (INIS)

Liu Chengze; Yan Zhi; Deng Jingshan

2012-01-01

Application status of robot in nuclear power plants in some countries is summarized. The related robots include accident response robot, dismantling and cleaning robot, in-service inspection robot, special-purpose robot and so on. Finally, some key technologies such as the radiation-tolerance and reliability of the robot systems are analyzed in details. (authors)
Guidelines for Preparing Final Technical Reports

International Development Research Centre (IDRC) Digital Library (Canada)

fdieudonne

Prior to submitting the Final Technical Report, any outstanding issues related to dissemination in accordance with ... The report should be an opportunity to reflect on the management of the project from various perspectives: .... of poor quality.
22 CFR 72.5 - Final report of death.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Final report of death. 72.5 Section 72.5... DEATHS AND ESTATES Reporting Deaths of United States Nationals § 72.5 Final report of death. (a) Preparation. Except in the case of the death of an active duty member of the United States Armed Forces, when...
Synthesis, Properties, and Applications of Low-Dimensional Carbon-Related Nanomaterials

Directory of Open Access Journals (Sweden)

Ali Mostofizadeh

2011-01-01

Full Text Available In recent years, many theoretical and experimental studies have been carried out to develop one of the most interesting aspects of the science and nanotechnology which is called carbon-related nanomaterials. The goal of this paper is to provide a review of some of the most exciting and important developments in the synthesis, properties, and applications of low-dimensional carbon nanomaterials. Carbon nanomaterials are formed in various structural features using several different processing methods. The synthesis techniques used to produce specific kinds of low-dimensional carbon nanomaterials such as zero-dimensional carbon nanomaterials (including fullerene, carbon-encapsulated metal nanoparticles, nanodiamond, and onion-like carbons, one-dimensional carbon nanomaterials (including carbon nanofibers and carbon nanotubes, and two-dimensional carbon nanomaterials (including graphene and carbon nanowalls are discussed in this paper. Subsequently, the paper deals with an overview of the properties of the mainly important products as well as some important applications and the future outlooks of these advanced nanomaterials.
Web Application Vulnerabilities

OpenAIRE

Yadav, Bhanu

2014-01-01

Web application security has been a major issue in information technology since the evolvement of dynamic web application. The main objective of this project was to carry out a detailed study on the top three web application vulnerabilities such as injection, cross site scripting, broken authentication and session management, present the situation where an application can be vulnerable to these web threats and finally provide preventative measures against them. ...
Global tuning knobs for the SLC final focus

International Nuclear Information System (INIS)

Walker, N.J.; Irwin, J.; Woodley, M.

1993-04-01

The beam phase space at the exit of a given transport line generally depends on the incoming beam conditions, and thus in order to adjust the beam parameters at the exit of the line requires a prior knowledge of the initial beam parameters. The same is generally true for final focus systems. A tuning algorithm for β matching the SLC final focus is reported here in which no prior knowledge of the exact incoming phase space is required. Only a single beam size diagnostic located at either the interaction point (IP) or an image of the IP is required, together with a knowledge of the linear lattice from the quadrupoles to the tuning point. The algorithm is presented within the Lie Algebra framework. Although the algorithm is presented here is specific to linear collider final focus systems, the technique is generally applicable to any beamline
Sanitary landfill in situ bioremediation optimization test. Final report

International Nuclear Information System (INIS)

1996-01-01

This work was performed as part of a corrective action plan for the Savannah River Site Sanitary Landfill. This work was performed for the Westinghouse Savannah River Company Environmental Restoration Department as part of final implementation of a groundwater remediation system for the SRS Sanitary Landfill. Primary regulatory surveillance was provided by the South Carolina Department of Health and Environmental Control and the US Environmental Protection Agency (Region IV). The characterization, monitoring and remediation systems in the program generally consisted of a combination of innovative and baseline methods to allow comparison and evaluation. The results of these studies will be used to provide input for the full-scale groundwater remediation system for the SRS Sanitary Landfill. This report summarizes the performance of the Sanitary Landfill In Situ Optimization Test data, an evaluation of applicability, conclusions, recommendations, and related information for implementation of this remediation technology at the SRS Sanitary Landfill
Technologies and tools for high-performance distributed computing. Final report

Energy Technology Data Exchange (ETDEWEB)

Karonis, Nicholas T.

2000-05-01

In this project we studied the practical use of the MPI message-passing interface in advanced distributed computing environments. We built on the existing software infrastructure provided by the Globus Toolkit{trademark}, the MPICH portable implementation of MPI, and the MPICH-G integration of MPICH with Globus. As a result of this project we have replaced MPICH-G with its successor MPICH-G2, which is also an integration of MPICH with Globus. MPICH-G2 delivers significant improvements in message passing performance when compared to its predecessor MPICH-G and was based on superior software design principles resulting in a software base that was much easier to make the functional extensions and improvements we did. Using Globus services we replaced the default implementation of MPI's collective operations in MPICH-G2 with more efficient multilevel topology-aware collective operations which, in turn, led to the development of a new timing methodology for broadcasts [8]. MPICH-G2 was extended to include client/server functionality from the MPI-2 standard [23] to facilitate remote visualization applications and, through the use of MPI idioms, MPICH-G2 provided application-level control of quality-of-service parameters as well as application-level discovery of underlying Grid-topology information. Finally, MPICH-G2 was successfully used in a number of applications including an award-winning record-setting computation in numerical relativity. In the sections that follow we describe in detail the accomplishments of this project, we present experimental results quantifying the performance improvements, and conclude with a discussion of our applications experiences. This project resulted in a significant increase in the utility of MPICH-G2.
Implementation of pesticide applicator certification schools and continuing education workshops : final report.

Science.gov (United States)

2014-12-11

The Oklahoma Department of Transportations (ODOT) herbicide applicator training program consists of initial pesticide applicator training schools followed by independent Certification testing and then on-going yearly continuing education workshops...
DOE final technical report 3/1997 to 2/2005

International Nuclear Information System (INIS)

Gross, Franz L.

2005-01-01

DOE final technical report 3/1997 to 2/2005 This grant supported basic theoretical research into the derivation (from relativistic field theories) of relativistic equations for few body systems, with practical applications to the properties of 2 and 3 nucleon systems and to the nature of few-quark systems
Claims Procedure for Plans Providing Disability Benefits. Final rule.

Science.gov (United States)

2016-12-19

This document contains a final regulation revising the claims procedure regulations under the Employee Retirement Income Security Act of 1974 (ERISA) for employee benefit plans providing disability benefits. The final rule revises and strengthens the current rules primarily by adopting certain procedural protections and safeguards for disability benefit claims that are currently applicable to claims for group health benefits pursuant to the Affordable Care Act. This rule affects plan administrators and participants and beneficiaries of plans providing disability benefits, and others who assist in the provision of these benefits, such as third-party benefits administrators and other service providers.
Nonlinear Theoretical Tools for Fusion-related Microturbulence: Historical Evolution, and Recent Applications to Stochastic Magnetic Fields, Zonal-flow Dynamics, and Intermittency

International Nuclear Information System (INIS)

Krommes, J.A.

2009-01-01

Fusion physics poses an extremely challenging, practically complex problem that does not yield readily to simple paradigms. Nevertheless, various of the theoretical tools and conceptual advances emphasized at the KaufmanFest 2007 have motivated and/or found application to the development of fusion-related plasma turbulence theory. A brief historical commentary is given on some aspects of that specialty, with emphasis on the role (and limitations) of Hamiltonian/symplectic approaches, variational methods, oscillation-center theory, and nonlinear dynamics. It is shown how to extract a renormalized ponderomotive force from the statistical equations of plasma turbulence, and the possibility of a renormalized K-? theorem is discussed. An unusual application of quasilinear theory to the problem of plasma equilibria in the presence of stochastic magnetic fields is described. The modern problem of zonal-flow dynamics illustrates a confluence of several techniques, including (i) the application of nonlinear-dynamics methods, especially center-manifold theory, to the problem of the transition to plasma turbulence in the face of self-generated zonal flows; and (ii) the use of Hamiltonian formalism to determine the appropriate (Casimir) invariant to be used in a novel wave-kinetic analysis of systems of interacting zonal flows and drift waves. Recent progress in the theory of intermittent chaotic statistics and the generation of coherent structures from turbulence is mentioned, and an appeal is made for some new tools to cope with these interesting and difficult problems in nonlinear plasma physics. Finally, the important influence of the intellectually stimulating research environment fostered by Prof. Allan Kaufman on the author's thinking and teaching methodology is described.
Effects of cooking method and final core-temperature on cooking loss, lipid oxidation, nucleotide-related compounds and aroma volatiles of Hanwoo brisket

Directory of Open Access Journals (Sweden)

Dicky Tri Utama

2018-02-01

Full Text Available Objective This study observed the effects of cooking method and final core temperature on cooking loss, lipid oxidation, aroma volatiles, nucleotide-related compounds and aroma volatiles of Hanwoo brisket (deep pectoralis. Methods Deep pectoralis muscles (8.65% of crude fat were obtained from three Hanwoo steer carcasses with 1+ quality grade. Samples were either oven-roasted at 180°C (dry heat or cooked in boiling water (moist heat to final core temperature of 70°C (medium or 77°C (well-done. Results Boiling method reduced more fat but retained more moisture than did the oven roasting method (p<0.001, thus no significant differences were found on cooking loss. However, samples lost more weight as final core temperature increased (p<0.01. Further, total saturated fatty acid increased (p = 0.02 while total monounsaturated fatty acid decreased (p = 0.03 as final core temperature increased. Regardless the method used for cooking, malondialdehyde (p<0.01 and free iron contents (p<0.001 were observed higher in samples cooked to 77°C. Oven roasting retained more inosinic acid, inosine and hypoxanthine in samples than did the boiling method (p<0.001, of which the concentration decreased as final core temperature increased except for hypoxanthine. Samples cooked to 77°C using oven roasting method released more intense aroma than did the others and the aroma pattern was discriminated based on the intensity. Most of aldehydes and pyrazines were more abundant in oven-roasted samples than in boiled samples. Among identified volatiles, hexanal had the highest area unit in both boiled and oven-roasted samples, of which the abundance increased as the final core temperature increased. Conclusion The boiling method extracted inosinic acid and rendered fat from beef brisket, whereas oven roasting intensified aroma derived from aldehydes and pyrazines and prevented the extreme loss of inosinic acid.
LAST MINUTE SOLUTIONS FOR IMPROVING ROMANIA’S FINAL RESULTS IN RELATION TO EUROPE 2020 STRATEGY

Directory of Open Access Journals (Sweden)

ANA MARIA TALMACIU (BANU

2016-10-01

Full Text Available The aim of this study is to upgrade the competitive position of Romania in relation to the Europe 2020 Strategy, and to offer some last-minute solutions to improve the final results. Romania's interim results revealed a very slow pace for meeting the national proposed targets. The context in which Romania joined this competitive program was not a favorable one, if we consider her state of new state in the EU and the economic crisis. In the first part of the study we analyze the main macroeconomic indicators for the period before adopting the Europe 2020 Strategy. We believe that this initial analysis is relevant to a better understanding of the initially context of the country, and for a better assessment of actual outcomes. The second part of the study updates interim results of proposed national targets in the Europe 2020 strategy. The personal contribution in this study consists in the comments on the analyzed indicators and in the proposed solutions for the next 3 years of implementation of the strategic program.
Expression and Organization of Geographic Spatial Relations Based on Topic Maps

Science.gov (United States)

Liang, H. J.; Wang, H.; Cui, T. J.; Guo, J. F.

2017-09-01

Spatial Relation is one of the important components of Geographical Information Science and Spatial Database. There have been lots of researches on Spatial Relation and many different spatial relations have been proposed. The relationships among these spatial relations such as hierarchy and so on are complex and this brings some difficulties to the applications and teaching of these spatial relations. This paper summaries some common spatial relations, extracts the topic types, association types, resource types of these spatial relations using the technology of Topic Maps, and builds many different relationships among these spatial relations. Finally, this paper utilizes Java and Ontopia to build a topic map among these common spatial relations, forms a complex knowledge network of spatial relations, and realizes the effective management and retrieval of spatial relations.
#%Applications of artificial intelligence in intelligent manufacturing: a review

Institute of Scientific and Technical Information of China (English)

#

2017-01-01

#%Based on research into the applications of artificial intelligence (AI) technology in the manufacturing industry in recent years, we analyze the rapid development of core technologies in the new era of 'Internet plus AI', which is triggering a great change in the models, means, and ecosystems of the manufacturing industry, as well as in the development of AI. We then propose new models, means, and forms of intelligent manufacturing, intelligent manufacturing system architecture, and intelligent man-ufacturing technology system, based on the integration of AI technology with information communications, manufacturing, and related product technology. Moreover, from the perspectives of intelligent manufacturing application technology, industry, and application demonstration, the current development in intelligent manufacturing is discussed. Finally, suggestions for the appli-cation of AI in intelligent manufacturing in China are presented.
The Final Development Related Microbial Pigments and the Application in Food Industry

OpenAIRE

YANGILAR, Filiz; YILDIZ, Pınar OGUZHAN

2016-01-01

The successful marketing of natural pigments derived from microorganisms and microalgae or extracted from flowering plants, both as food colorants and nutritional supplements, reflects the presence, and importance of markets in which consumers are willing to pay a premium for “natural healthy ingredients”. As known, pigments prefer in natural products have antioxidant, antimicrobial and antimutagenic activities. The most commonly used food grade pigments are chemical compounds containing nitr...
Final Exam Weighting as Part of Course Design

Directory of Open Access Journals (Sweden)

Matthew Franke

2018-03-01

Full Text Available The weighting of a final exam or a final assignment is an essential part of course design that is rarely discussed in pedagogical literature. Depending on the weighting, a final exam or assignment may provide unequal benefits to students depending on their prior performance in the class. Consequently, uncritical grade weighting can discount student learning, by ensuring that improved mastery of material at the semester’s end is not reflected in the course grade. Problems related to several common final exam weights are explored, as are potential solutions to unequal student outcomes made possible by uncritical grade weighting. Ultimately, this essay argues that choosing a weight for a final exam or a final assignment determines what types of student success ought to be possible in the class; therefore, instructors should assign exam weights intentionally, being fully aware of the potential benefits and problems of the weights that they choose.
Final environmental statement related to the operation of Callaway Plant, Unit No. 1 (Docket No. 50-483)

International Nuclear Information System (INIS)

1982-01-01

The final environmental statement contains the second assessment of the environmental impact associated with operation of Callaway Plant Unit 1, pursuant to the National Environmental Policy Act of 1969 (NEPA) and 10 CFR Par 51, as amended, of the NRC's regulations. This statement examines: the purpose and need for the Callaway project, alternatives to the project, the affected environment, environmental consequences and mitigating actions, and environmental and economic benefits and costs. No water-use impacts are expected from cooling-tower markup withdrawn from, or blowdown discharged into, the Missouri River. Land-use and terrestrial- and aquatic-ecological impacts will be small. Air-quality impacts from cooling-tower drift and other emissions and dust will also be small. Impacts to historic and prehistoric sites will be negligible with the development and implementation of the applicant's cultural-resources management plan. No significant impacts are anticipated from normal operational releases of radioactivity. The risk associated with accidental radiation exposure is very low. The net socioeconomic effects of the project will be beneficial. The action called for is the issuance of an operating license for Unit 1 of the Callaway Plant. 18 figs., 16 tabs
Comparison of tree types of models for the prediction of final academic achievement

Directory of Open Access Journals (Sweden)

Silvana Gasar

2002-12-01

Full Text Available For efficient prevention of inappropriate secondary school choices and by that academic failure, school counselors need a tool for the prediction of individual pupil's final academic achievements. Using data mining techniques on pupils' data base and expert modeling, we developed several models for the prediction of final academic achievement in an individual high school educational program. For data mining, we used statistical analyses, clustering and two machine learning methods: developing classification decision trees and hierarchical decision models. Using an expert system shell DEX, an expert system, based on a hierarchical multi-attribute decision model, was developed manually. All the models were validated and evaluated from the viewpoint of their applicability. The predictive accuracy of DEX models and decision trees was equal and very satisfying, as it reached the predictive accuracy of an experienced counselor. With respect on the efficiency and difficulties in developing models, and relatively rapid changing of our education system, we propose that decision trees are used in further development of predictive models.

[Application of target restoration space quantity and quantitative relation in precise esthetic prosthodontics].

Science.gov (United States)

Haiyang, Yu; Tian, Luo

2016-06-01

Target restoration space (TRS) is the most precise space required for designing optimal prosthesis. TRS consists of an internal or external tooth space to confirm the esthetics and function of the final restoration. Therefore, assisted with quantitive analysis transfer, TRS quantitative analysis is a significant improvement for minimum tooth preparation. This article presents TRS quantity-related measurement, analysis, transfer, and internal relevance of three TR. classifications. Results reveal the close bond between precision and minimally invasive treatment. This study can be used to improve the comprehension and execution of precise esthetic prosthodontics.
Fentanyl-related compounds and derivatives: current status and future prospects for pharmaceutical applications

Science.gov (United States)

Vardanyan, Ruben S; Hruby, Victor J

2014-01-01

Fentanyl and its analogs have been mainstays for the treatment of severe to moderate pain for many years. In this review, we outline the structural and corresponding synthetic strategies that have been used to understand the structure–biological activity relationship in fentanyl-related compounds and derivatives and their biological activity profiles. We discuss how changes in the scaffold structure can change biological and pharmacological activities. Finally, recent efforts to design and synthesize novel multivalent ligands that act as mu and delta opioid receptors and NK-1 receptors are discussed. PMID:24635521
Relative injectivity and CS-modules

Directory of Open Access Journals (Sweden)

Mahmoud Ahmed Kamal

1994-01-01

Full Text Available In this paper we show that a direct decomposition of modules M⊕N, with N homologically independent to the injective hull of M, is a CS-module if and only if N is injective relative to M and both of M and N are CS-modules. As an application, we prove that a direct sum of a non-singular semisimple module and a quasi-continuous module with zero socle is quasi-continuous. This result is known for quasi-injective modules. But when we confine ourselves to CS-modules we need no conditions on their socles. Then we investigate direct sums of CS-modules which are pairwise relatively inective. We show that every finite direct sum of such modules is a CS-module. This result is known for quasi-continuous modules. For the case of infinite direct sums, one has to add an extra condition. Finally, we briefly discuss modules in which every two direct summands are relatively inective.
75 FR 30805 - Gibson Dam Hydroelectric Company, LLC; Notice Soliciting Comments, and Final Terms and Conditions...

Science.gov (United States)

2010-06-02

... Hydroelectric Company, LLC; Notice Soliciting Comments, and Final Terms and Conditions, Recommendations, and Prescriptions May 26, 2010. Take notice that the following hydroelectric application and applicant-prepared..., 2009. d. Applicant: Gibson Dam Hydroelectric Company, LLC. e. Name of Project: Gibson Dam Hydroelectric...
Final safety evaluation report related to the certification of the System 80+ design (Docket No. 52-002). Volume 2, Chapters 15--22 and appendices

International Nuclear Information System (INIS)

1994-08-01

This final safety evaluation report (FSER) documents the technical review of the System 80+ standard design by the US Nuclear Regulatory Commission (NRC) staff. The application for the system 80+ design was submitted by Combustion Engineering, Inc., now Asea Brown Boveri-Combustion Engineering (ABB-CE) as an application for design approval and subsequent design certification pursuant to 10 CFR section 52.45. System 80+ is a pressurized water reactor with a rated power of 3914 megawatts thermal (MWt) and a design power of 3992 MWt at which accidents are analyzed. Many features of the System 80+ are similar to those of ABB-CE's System 80 design from which it evolved. Unique features of the System 80+ design include: a large spherical, steel containment; an in-containment refueling water storage tank; a reactor cavity flooding system, hydrogen ignitors and a safety depressurization system for severe accident mitigation; a combustion gas turbine for an alternate ac source; and an advanced digitally based control room. On the basis of its evaluation and independent analyses, the NRC staff concludes that ABB-CE's application for design certification meets the requirements of Subpart B of 10 CFR Part 52 that are applicable and technically relevant to the System 80+ standard design. This document, Volume 2, contains Chapters 15 through 22 and Appendices A through E
Usage of Commercial Grade Programmable Digital Systems in Safety Related Applications

International Nuclear Information System (INIS)

Mandic, D.

2006-01-01

This paper explains methods and conditions, which if completely and correctly fulfilled, enable an operating NPP (Nuclear Power Plant) licensed and operating in accordance with the US codes and US regulatory requirements to use a commercial grade programmable digital device (PLC - Programmable Digital Controller, digital controller, digital computer or process computer) in a safety related application in a NPP. In mid 80's, when an intensive construction cycle of the new NPPs in the U.S.A. was completed, many equipment manufacturers either disappeared from the market or they abandoned their product lines that were designed and manufactured under 10 CFR Part 50 Appendix B quality assurance program. The quality assurance as defined by 10 CFR Part 50 Appendix B comprises all those planned and systematic actions necessary to provide adequate confidence that a Structure, System or Component (SSC) will perform satisfactorily in service . The operating NPPs faced the problem related to the availability of qualified equipment, components and spare parts. The US NRC (Nuclear Regulatory Commission) recognized that problem timely (Oct. 1978 revision of 10CFR21) and required a commercial grade item to be dedicated before it could be used as a basic component. A special process named Dedication of CGI - Commercial Grade Items if conducted properly, provides reasonable assurance that a commercial grade item to be used as a basic component will perform its intended safety related function and, in this respect, is deemed equivalent to an item designed and manufactured under 10 CFR Part 50 Appendix B. After that, the Dedication of CGI has been widely used mostly for relatively simple mechanical, electrical, and IandC components and spare parts. In order to provide guidance to the dedication process, EPRI has issued two documents (EPRI NP-5652 and Supplemental Guidance for EPRI NP-5652). All nuclear power plants, which comply with the US nuclear regulatory requirements, hindered as
Health-related Internet use by patients with somatic diseases : Frequency of use and characteristics of users

NARCIS (Netherlands)

van Uden-Kraan, Cornelia F.; Drossaert, Constance H C; Taal, Erik; Smit, Wim; Moens, Hein J Bernelot; Siesling, Sabine; Seydel, Erwin R.; van de Laar, Mart A F J

2009-01-01

The aim of this study was to explore the percentage of Dutch patients using the Internet to search for information about their illness. In addition, we studied patients' usage of health-related Internet applications, such as online patient support groups. The final objective of this study was to
Health-related Internet use by patients with somatic diseases: Frequency of use and characteristics of users

NARCIS (Netherlands)

Kraan, C.F.; Drossaert, Constance H.C.; Taal, Erik; Smit, Wim M.; Bernelot Moens, Hein J.; Siesling, Sabine; Seydel, E.R.; van de Laar, Mart A F J

2009-01-01

The aim of this study was to explore the percentage of Dutch patients using the Internet to search for information about their illness. In addition, we studied patients' usage of health-related Internet applications, such as online patient support groups. The final objective of this study was to
Evaluative studies in nuclear medicine research: positron computed tomography assessment. Final report, January 1, 1982-December 31, 1982

International Nuclear Information System (INIS)

Potchen, E.J.; Harris, G.I.; Gift, D.A.; Reinhard, D.K.; Siebert, J.E.

1983-02-01

Results are reported of the final phase of the study effort generally titled Evaluative Studies in Nuclear Medicine Research. The previous work is reviewed and extended to an assessment providing perspectives on medical applications of positron emission tomographic (PET) systems, their technological context, and the related economic and marketing environment. Methodologies developed and used in earlier phases of the study were continued, but specifically extended to include solicitation of opinion from commercial organizations deemed to be potential developers, manufacturers and marketers of PET systems. Several factors which influence the demand for clinical uses of PET are evaluated and discussed. The recent Federal funding of applied research with PET systems is found to be a necessary and encouraging event toward a determination that PET either is a powerful research tool limited to research, or whether it also presents major clinical utility. A comprehensive, updated bibliography of current literature related to the development, applications and economic considerations of PET technology is appended
Multi-Application Small Light Water Reactor Final Report

International Nuclear Information System (INIS)

Modro, S.M.; Fisher, J.E.; Weaver, K.D.; Reyes, J.N.; Groome, J.T.; Babka, P.; Carlson, T.M.

2003-01-01

The Multi-Application Small Light Water Reactor (MASLWR) project was conducted under the auspices of the Nuclear Energy Research Initiative (NERI) of the U.S. Department of Energy (DOE). The primary project objectives were to develop the conceptual design for a safe and economic small, natural circulation light water reactor, to address the economic and safety attributes of the concept, and to demonstrate the technical feasibility by testing in an integral test facility. This report presents the results of the project. After an initial exploratory and evolutionary process, as documented in the October 2000 report, the project focused on developing a modular reactor design that consists of a self-contained assembly with a reactor vessel, steam generators, and containment. These modular units would be manufactured at a single centralized facility, transported by rail, road, and/or ship, and installed as a series of self-contained units. This approach also allows for staged construction of an NPP and ''pull and replace'' refueling and maintenance during each five-year refueling cycle. Development of the baseline design concept has been sufficiently completed to determine that it complies with the safety requirements and criteria, and satisfies the major goals already noted. The more significant features of the baseline single-unit design concept include: (1) Thermal Power--150 MWt; (2) Net Electrical Output--35 MWe; (3) Steam Generator Type--Vertical, helical tubes; (4) Fuel UO 2 , 8% enriched; (5) Refueling Intervals--5 years; (6) Life-Cycle--60 years. The economic performance was assessed by designing a power plant with an electric generation capacity in the range of current and advanced evolutionary systems. This approach allows for direct comparison of economic performance and forms a basis for further evaluation, economic and technical, of the proposed design and for the design evolution towards a more cost competitive concept. Applications such as cogeneration
Flow, transport and diffusion in random geometries II: applications

KAUST Repository

Asinari, Pietro

2015-01-07

Multilevel Monte Carlo (MLMC) is an efficient and flexible solution for the propagation of uncertainties in complex models, where an explicit parametrization of the input randomness is not available or too expensive. We present several applications of our MLMC algorithm for flow, transport and diffusion in random heterogeneous materials. The absolute permeability and effective diffusivity (or formation factor) of micro-scale porous media samples are computed and the uncertainty related to the sampling procedures is studied. The algorithm is then extended to the transport problems and multiphase flows for the estimation of dispersion and relative permeability curves. The impact of water drops on random stuctured surfaces, with microfluidics applications to self-cleaning materials, is also studied and simulated. Finally the estimation of new drag correlation laws for poly-dispersed dilute and dense suspensions is presented.
Flow, transport and diffusion in random geometries II: applications

KAUST Repository

Asinari, Pietro; Ceglia, Diego; Icardi, Matteo; Prudhomme, Serge; Tempone, Raul

2015-01-01

Multilevel Monte Carlo (MLMC) is an efficient and flexible solution for the propagation of uncertainties in complex models, where an explicit parametrization of the input randomness is not available or too expensive. We present several applications of our MLMC algorithm for flow, transport and diffusion in random heterogeneous materials. The absolute permeability and effective diffusivity (or formation factor) of micro-scale porous media samples are computed and the uncertainty related to the sampling procedures is studied. The algorithm is then extended to the transport problems and multiphase flows for the estimation of dispersion and relative permeability curves. The impact of water drops on random stuctured surfaces, with microfluidics applications to self-cleaning materials, is also studied and simulated. Finally the estimation of new drag correlation laws for poly-dispersed dilute and dense suspensions is presented.
Rural public transportation technologies : user needs and applications : final report

Science.gov (United States)

1998-07-01

The Rural Public Transportation Technologies: User Needs and Applications study was conducted as part of the U.S. Department of Transportations (DOT) overall Rural Intelligent Transportation System (ITS) Program. The study examined the opportuniti...
Application specific compression : final report.

Energy Technology Data Exchange (ETDEWEB)

Melgaard, David Kennett; Byrne, Raymond Harry; Myers, Daniel S.; Harrison, Carol D.; Lee, David S.; Lewis, Phillip J.; Carlson, Jeffrey J.

2008-12-01

With the continuing development of more capable data gathering sensors, comes an increased demand on the bandwidth for transmitting larger quantities of data. To help counteract that trend, a study was undertaken to determine appropriate lossy data compression strategies for minimizing their impact on target detection and characterization. The survey of current compression techniques led us to the conclusion that wavelet compression was well suited for this purpose. Wavelet analysis essentially applies a low-pass and high-pass filter to the data, converting the data into the related coefficients that maintain spatial information as well as frequency information. Wavelet compression is achieved by zeroing the coefficients that pertain to the noise in the signal, i.e. the high frequency, low amplitude portion. This approach is well suited for our goal because it reduces the noise in the signal with only minimal impact on the larger, lower frequency target signatures. The resulting coefficients can then be encoded using lossless techniques with higher compression levels because of the lower entropy and significant number of zeros. No significant signal degradation or difficulties in target characterization or detection were observed or measured when wavelet compression was applied to simulated and real data, even when over 80% of the coefficients were zeroed. While the exact level of compression will be data set dependent, for the data sets we studied, compression factors over 10 were found to be satisfactory where conventional lossless techniques achieved levels of less than 3.
Final Report Package_Winnebago

Energy Technology Data Exchange (ETDEWEB)

Carolyn Stewart, Director, Red Mountain Energy Partners

2006-10-31

The Winnebago Tribe of Nebraska energy options study results will be used to advance the Tribe’s near term energy management objectives. The array of energy options identified allows the Tribe to select those activities that best fit its energy strategies, goals and objectives. During the course of the study, Red Mountain analyzed both energy options and energy organizational alternatives suitable for the Tribe, presented findings to the Tribal Council, and made recommendations regarding each. Work products delivered to the Tribe, and provided in the Final Report included: • A matrix of energy management options applicable to the Tribe, which provided descriptions of particular conservation, efficiency, weatherization, and demand management alternatives. The matrix also provided insight about relative costs of the alternatives, cost/benefit efficacy, ease of implementation, resources for implementing, and observations about each. • A matrix of utility service options applicable to the Tribe, describing each of the four alternatives described above. The matrix also provided insight about key benefits of each option, required resources, costs and timeframe for implementation, funding sources and analysis, and key issues for consideration. • Discussion guides prepared for each meeting between the Energy Committee and Council, and the Tribe’s contractor, Red Mountain Energy Partners, which included preliminary analysis and findings. • A Position Description for the Energy Manager position, which was reviewed by the Tribal HR Department, and used by the Tribe to develop a position posting. • A Utility Code designed for Winnebago to use in establishing its Utility Board, and, ultimately, to provide guidance for the Board’s further development. • A project summary book developed to include all key information, deliverables and utility provider data for the project. Winnebago’s growth trends and expansion plans require the Tribe to play a more active
Tribal child welfare. Interim final rule.

Science.gov (United States)

2012-01-06

The Administration for Children and Families (ACF) is issuing this interim final rule to implement statutory provisions related to the Tribal title IV-E program. Effective October 1, 2009, section 479B(b) of the Social Security Act (the Act) authorizes direct Federal funding of Indian Tribes, Tribal organizations, and Tribal consortia that choose to operate a foster care, adoption assistance and, at Tribal option, a kinship guardianship assistance program under title IV-E of the Act. The Fostering Connections to Success and Increasing Adoptions Act of 2008 requires that ACF issue interim final regulations which address procedures to ensure that a transfer of responsibility for the placement and care of a child under a State title IV-E plan to a Tribal title IV-E plan occurs in a manner that does not affect the child's eligibility for title IV-E benefits or medical assistance under title XIX of the Act (Medicaid) and such services or payments; in-kind expenditures from third-party sources for the Tribal share of administration and training expenditures under title IV-E; and other provisions to carry out the Tribal-related amendments to title IV-E. This interim final rule includes these provisions and technical amendments necessary to implement a Tribal title IV-E program.
41 CFR 301-74.16 - What must be included in any advertisement or application form relating to conference attendance?

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false What must be included in any advertisement or application form relating to conference attendance? 301-74.16 Section 301-74.16... included in any advertisement or application form relating to conference attendance? (a) Any advertisement...
Project Rio Blanco: detonation related activities. Final report

International Nuclear Information System (INIS)

1975-01-01

Project Rio Blanco is described in relation to detonation, its history, execution, and results. Topics discussed include generalized site activities, emplacement well, explosive services and operations, operational safety, environmental protection program, seismic effects and damage claims, and add-on programs. (U.S.)
75 FR 24394 - Animal Drugs, Feeds, and Related Products; Withdrawal of Approval of a New Animal Drug...

Science.gov (United States)

2010-05-05

... [Docket No. FDA-2010-N-0002] Animal Drugs, Feeds, and Related Products; Withdrawal of Approval of a New Animal Drug Application; Buquinolate; Coumaphos AGENCY: Food and Drug Administration, HHS. ACTION: Final rule. SUMMARY: The Food and Drug Administration (FDA) is amending the animal drug regulations by...
Rural Public Transportation Technologies: User Needs and Applications. Final Report

Science.gov (United States)

1998-08-01

The Rural Public Transportation Technologies: User Needs and Applications Study was conducted as part of the U.S. DOT's overall Rural Intelligent Transportation System (ITS) Program. The study examined the opportunities and challenges of planning and...

29 CFR 801.73 - Final decision of the Secretary.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Final decision of the Secretary. 801.73 Section 801.73 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR OTHER LAWS... Vacation of Decision and Order of Administrative Law Judge § 801.73 Final decision of the Secretary. The...
Potential Applications of Smart Multifunctional Wearable Materials to Gerontology.

Science.gov (United States)

Armstrong, David G; Najafi, Bijan; Shahinpoor, Mohsen

2017-01-01

Smart multifunctional materials can play a constructive role in addressing some very important aging-related issues. Aging affects the ability of older adults to continue to live safely and economically in their own residences for as long as possible. Thus, there will be a greater need for preventive, acute, rehabilitative, and long-term health care services for older adults as well as a need for tools to enable them to function independently during daily activities. The objective of this paper is, thus, to present a comprehensive review of some potential smart materials and their areas of applications to gerontology. Thus, brief descriptions of various currently available multifunctional smart materials and their possible applications to aging-related problems are presented. It is concluded that some of the most important applications to geriatrics may be in various sensing scenarios to collect health-related feedback or information and provide personalized care. Further described are the applications of wearable technologies to aging-related needs, including devices for home rehabilitation, remote monitoring, social well-being, frailty monitoring, monitoring of diabetes and wound healing and fall detection or prediction. It is also concluded that wearable technologies, when combined with an appropriate application and with appropriate feedback, may help improve activities and functions of older patients with chronic diseases. Finally, it is noted that methods developed to measure what one collectively manages in this population may provide a foundation to establish new definitions of quality of life. © 2017 S. Karger AG, Basel.
Application of self-consolidating concrete in bridge structures : final report.

Science.gov (United States)

2011-05-01

The objectives of this research were to evaluate the feasibility and performance of self-consolidating concrete (SCC) made with local aggregates for use in cast-in-place and precast concrete applications and to develop draft specifications, acceptanc...
Supplement to Final Environmental Statement related to construction and operation of Clinch River Breeder Reactor Plant, Docket No. 50-537

International Nuclear Information System (INIS)

1982-10-01

In February 1977, the Office of Nuclear Reactor Regulation issued a Final Environmental Statement (FES) (NUREG-0139) related to the construction and operation of the proposed Clinch River Breeder Reactor Plant (CRBRP). Since the FES was issued, additional data relative to the site and its environs have been collected, several modifications have been made to the CRBRP design, and its fuel cycle, and the timing of the plant construction and operation has been affected in accordance with deferments under the DOE Liquid Metal Fast Breeder Reactor (LMFBR) program. These changes are summarized and their environmental significance is assessed in this document. The reader should note that this document generally does not repeat the substantial amount of information in the FES which is still current; hence, the FES should be consulted for a comprehensive understanding of the staff's environmental review of the CRBRP project
Multifractals theory and applications

CERN Document Server

Harte, David

2001-01-01

Although multifractals are rooted in probability, much of the related literature comes from the physics and mathematics arena. Multifractals: Theory and Applications pulls together ideas from both these areas using a language that makes them accessible and useful to statistical scientists. It provides a framework, in particular, for the evaluation of statistical properties of estimates of the Renyi fractal dimensions.The first section provides introductory material and different definitions of a multifractal measure. The author then examines some of the various constructions for describing multifractal measures. Building from the theory of large deviations, he focuses on constructions based on lattice coverings, covering by point-centered spheres, and cascades processes. The final section presents estimators of Renyi dimensions of integer order two and greater and discusses their properties. It also explores various applications of dimension estimation and provides a detailed case study of spatial point patte...
Novel designs for application specific MEMS pressure sensors.

Science.gov (United States)

Fragiacomo, Giulio; Reck, Kasper; Lorenzen, Lasse; Thomsen, Erik V

2010-01-01

In the framework of developing innovative microfabricated pressure sensors, we present here three designs based on different readout principles, each one tailored for a specific application. A touch mode capacitive pressure sensor with high sensitivity (14 pF/bar), low temperature dependence and high capacitive output signal (more than 100 pF) is depicted. An optical pressure sensor intrinsically immune to electromagnetic interference, with large pressure range (0-350 bar) and a sensitivity of 1 pm/bar is presented. Finally, a resonating wireless pressure sensor power source free with a sensitivity of 650 KHz/mmHg is described. These sensors will be related with their applications in harsh environment, distributed systems and medical environment, respectively. For many aspects, commercially available sensors, which in vast majority are piezoresistive, are not suited for the applications proposed.
Motor vehicle-related air toxics study. Final report

International Nuclear Information System (INIS)

1993-04-01

Section 202 (1)(1) of the Clean Air Act (CAA), as amended (Section 206 of the Clean Air Act Amendments) (CAAA) of 1990 added paragraph (1) to Section 202 of the (CAA), directs the Environmental Protection Agency (EPA) to complete a study by May 15, 1992 of the need for, and feasibility of, controlling emissions of toxic air pollutants which are unregulated under the Act and associated with motor vehicles and motor vehicle fuels. The report has been prepared in response to Section 202 (1)(1). Specific pollutants or pollutant categories which are discussed in the report include benezene, formaldehyde, 1,3-butadiene, acetaldehyde, diesel particulate matter, gasoline particulate matter, and gasoline vapors as well as certain of the metals and motor vehicle-related pollutants identified in Section 112 of the Clean Air Act. The focus of the report is on carcinogenic risk. The study attempts to summarize what is known about motor vehicle-related air toxics and to present all significant scientific opinion on each issue
The Effects Foliar Application of Methanol at Different Growth Stages on Kernel Related Traits in Chickpea var. ILC 482

Directory of Open Access Journals (Sweden)

N. Naeimi,

2013-12-01

Full Text Available This research was conducted to evaluate the effects of foliar application of methanol on certain kernel related traits at different growth stages of pea var. ILC482 at the Research Station of Faculty of Agriculture in Islamic Azad University, Tabriz Branch in 2011. The study was conducted in split plot experiment based on Randomized Complete Block Design with three replications. Treatments were three levels methanol foliar application at different growth stages (vegetative, reproductive and foliar application at both two stages which considered as main factor, six levels of foliar application of methanol concentrations: (0 [control], 5, 10, 15, 20, 25, 30% as sub factor. Results showed that the interactions of methanol applications growth stages and its concentrations on grain number per plant, 100 kernel weight, grain yield, grain filing rate and harvest index were significantly different. Foliar application of methanol at reproductive stage decrease kernel related traits, but this application at both growth stages had positive effect on grain production and kernel related traits. This positive effect on number and 100 kernel weight were significant. The highest grain yield (2460 kg/ha was obtained by 20% concentration of methanol at both growth stages that increased grain yield above 13.5% compared to the control condition.
Final report for the 'Melt-Vessel Interactions' Project. European Union R and TD Program 4th Framework. MVI project final research report

Energy Technology Data Exchange (ETDEWEB)

Sehgal, B.R.; Dinh, T.N.; Nourgaliev, R.R.; Bui, V.A.; Green, J.; Kolb, G.; Karbojian, A.; Theerthan, S.A.; Gubaidulline, A. [Royal Inst. of Tech., Stockholm (Sweden). Div. of Nuclear Power Safety; Helle, M.; Kymaelaeinen, O.; Tuomisto, H. [IVO Power Engineering Ltd., Vantaa (Finland); Bonnet, J.M.; Rouge, S.; Narcoux, M.; Liegeois, A. [CEA - Grenoble (France); Turland, B.D.; Dobson, G.P. [AEA Technology plc, Dorchester (United Kingdom); Siccama, A. [ECN Nuclear Research, Petten (Netherlands); Ikonen, K. [VTT Energy, Helsinki (Finland); Parozzi, F. [ENEL - SRI/PAM/GRA, Segrate, MI (Italy); Kolev, N. [Siemens AG, Erlangen (Germany); Caira, M. [Univ. of Roma (Italy)

1999-04-01

The Melt Vessel Interaction (MVI) project is concerned with the consequences of the interactions that a core melt, generated during a postulated severe accident in a light water reactor, may have with the pressure vessel. In particular, the issues concerned with the failure of the vessel bottom head are the focus of the research. The specific objectives of the project are to obtain data and develop validated models, which could be applied to prototypic plants, and accident conditions, for resolution of issues related to the melt vessel interactions. The project work has been performed by nine partners having varied responsibility. The work included a large number of experiments, with simulant materials, whose observations and results are employed, respectively, to understand the physical mechanisms and to develop validated models. Applications to the prototypic geometry and conditions have also been performed. This report is volume 1 of the Final Report for the Project, in which a summary of the progress achieved in the experimental program is provided. We have, however, included some aspects of the modeling activities. Volume 2 of the Final report describes the progress achieved in the modeling program. The progress achieved in the experimental and modeling parts of the Project has led to the resolution of some of the issues of melt vessel interaction. Considerable progress was also achieved towards resolution of the remaining issues.
Relative risk analysis in regulating the use of radiation-emitting medical devices. A preliminary application

Energy Technology Data Exchange (ETDEWEB)

Jones, E.D.; Banks, W.W.; Altenbach, T.J.; Fischer, L.E. [Lawrence Livermore National Lab., CA (United States)

1995-09-01

This report describes a preliminary application of an analysis approach for assessing relative risks in the use of radiation- emitting medical devices. Results are presented on human-initiated actions and failure modes that are most likely to occur in the use of the Gamma Knife, a gamma irradiation therapy device. This effort represents an initial step in a US Nuclear Regulatory Commission (NRC) plan to evaluate the potential role of risk analysis in regulating the use of nuclear medical devices. For this preliminary application of risk assessment, the focus was to develop a basic process using existing techniques for identifying the most likely risk contributors and their relative importance. The approach taken developed relative risk rankings and profiles that incorporated the type and quality of data available and could present results in an easily understood form. This work was performed by the Lawrence Livermore National Laboratory for the NRC.
Relative risk analysis in regulating the use of radiation-emitting medical devices. A preliminary application

International Nuclear Information System (INIS)

Jones, E.D.; Banks, W.W.; Altenbach, T.J.; Fischer, L.E.

1995-09-01

This report describes a preliminary application of an analysis approach for assessing relative risks in the use of radiation- emitting medical devices. Results are presented on human-initiated actions and failure modes that are most likely to occur in the use of the Gamma Knife, a gamma irradiation therapy device. This effort represents an initial step in a US Nuclear Regulatory Commission (NRC) plan to evaluate the potential role of risk analysis in regulating the use of nuclear medical devices. For this preliminary application of risk assessment, the focus was to develop a basic process using existing techniques for identifying the most likely risk contributors and their relative importance. The approach taken developed relative risk rankings and profiles that incorporated the type and quality of data available and could present results in an easily understood form. This work was performed by the Lawrence Livermore National Laboratory for the NRC
Customized PEC modules. Final report

Energy Technology Data Exchange (ETDEWEB)

Soerensen, Martin B. (DTI, Taastrup (Denmark))

2012-07-01

The purpose of the project ''Customized PEC modules'' was to move from the production hand-made individual DSCs (dye-sensitized solar cells) in the laboratory to the production of DSC modules in a semi-automated process. At the same time allowing sufficient variation in the product's specification for real tailoring of the product to the application. The tailoring can be related to the module's electrical output and size, but also to the possibility of designing patterns for decoration or communication purposes by playing around with the shape, size and layout of the individual cells forming the module. This was to be accomplished mainly by screen printing of DSC components on glass substrates at Mekoprint. For reaching this goal the work was divided into a number of steps. The central part of the work done was in the initial conception activity and the following manufacturing activity. An activity regarding optimization included several tasks of optimization and adaptation of the existing laboratory process for manufacturing of the DSCs. Finally, work focused on international activities was done. All the steps needed for the production of customized DSC modules have been demonstrated in this project. In combination with the development of a high performing printable sealant and sealing method all the prerequisites for producing customized DSC modules have been demonstrated. (LN)
Heterocyclic Naphthalimides as New Skeleton Structure of Compounds with Increasingly Expanding Relational Medicinal Applications.

Science.gov (United States)

Gong, Huo-Hui; Addla, Dinesh; Lv, Jing-Song; Zhou, Cheng-He

2016-01-01

Naphthalimide compounds are an important type of nitrogen-containing aromatic heterocycles with cyclic double imides and the naphthalene framework. This π-deficient large conjugated planar structure enables naphthalimide derivatives to readily interact with various biological cations, anions, small molecules and macromolecules such as DNAs, enzymes and recetors in living organism via noncovalent bonds, therefore exhibiting extensive potentiality in relatively medicinal applications. Currently, some naphthalimides as anticancer agents have entered into clinical trials and other naphthalimide-based medicinal developments as potential drugs for treatment of various diseases are actively and unprecedentedly expanding. Naphthalimide-derived artificial ion receptors, fluorescent probes and cell imaging agents are being overwhelmingly investigated and have a diversity of potential applications in real-time detecting ions and biomolecules, understanding biological processes and determining pharmacological and pharmacokinetic properties. All the above mentions have strongly implied that naphthalimide-based derivatives as new skeleton structure of compounds possess increasingly expanding relational medicinal applications, and the related research is becoming a quite attractive active topic and newly rising highlight. Combining with our research and referring other works from literature, this work systematically reviews the current research and development of heterocyclic naphthalimides as anticancer, antibacterial, antifungal, antiviral, anti-inflammatory, antidepressant agents as well as artificial cation and anion receptors, diagnostic agents and pathologic probes, and cell imaging agents for biologically important species. Some rational design strategies, structure-activity relationships and action mechanisms are discussed. The perspectives of the future development of naphthalimide-based medicinal chemistry are also presented.
Cosmology Without Finality

Science.gov (United States)

Mahootian, F.

2009-12-01

The rapid convergence of advancing sensor technology, computational power, and knowledge discovery techniques over the past decade has brought unprecedented volumes of astronomical data together with unprecedented capabilities of data assimilation and analysis. A key result is that a new, data-driven "observational-inductive'' framework for scientific inquiry is taking shape and proving viable. The anticipated rise in data flow and processing power will have profound effects, e.g., confirmations and disconfirmations of existing theoretical claims both for and against the big bang model. But beyond enabling new discoveries can new data-driven frameworks of scientific inquiry reshape the epistemic ideals of science? The history of physics offers a comparison. The Bohr-Einstein debate over the "completeness'' of quantum mechanics centered on a question of ideals: what counts as science? We briefly examine lessons from that episode and pose questions about their applicability to cosmology. If the history of 20th century physics is any indication, the abandonment of absolutes (e.g., space, time, simultaneity, continuity, determinacy) can produce fundamental changes in understanding. The classical ideal of science, operative in both physics and cosmology, descends from the European Enlightenment. This ideal has for over 200 years guided science to seek the ultimate order of nature, to pursue the absolute theory, the "theory of everything.'' But now that we have new models of scientific inquiry powered by new technologies and driven more by data than by theory, it is time, finally, to relinquish dreams of a "final'' theory.
Final state interaction effect on correlations in narrow particles pairs

International Nuclear Information System (INIS)

Lednicky, R.; Lyuboshitz, V.L.

1990-01-01

In this paper the dependence of the two-particle correlation function on the space-time dimensions of the particle production region is discussed. The basic formulae, taking into account he effects of quantum statistics and final state interaction, and the conditions of their applicability are given
Final turbine and test facility design report Alden/NREC fish friendly turbine

Energy Technology Data Exchange (ETDEWEB)

Cook, Thomas C. [Alden Research Lab., Holden, MA (United States); Cain, Stuart A. [Alden Research Lab., Holden, MA (United States); Fetfatsidis, Paul [Alden Research Lab., Holden, MA (United States); Hecker, George E. [Alden Research Lab., Holden, MA (United States); Stacy, Philip S. [Alden Research Lab., Holden, MA (United States)

2000-09-01

The final report provides an overview of the Alden/NREC Fish Friendly turbine design phase, turbine test plan, preliminary test results, costs, schedule, and a hypothetical application at a real world project.
Some inspirations drawn from the SKB license-application report for the construction of the final repository for spent nuclear fuel in Sweden

International Nuclear Information System (INIS)

Xu Guoqing

2014-01-01

The following problems are described in this paper: the current state of nuclear energy and spent fuel in Sweden, the brief process of repository site selection and the concise geological settings of candidate site Forsmark, the option of repository design, the data presented in license-application report on repository, construction, the review work presented by OECD/NEA international peer review team (IRT) and some considerations noted by the author: 1) Why the design of underground engineering, also known as 5 shafts + l ramp, is adopted? 2) Why the timescale for the assessment is one million years? 3) Why the computer codes used in performance assessment at Forsmark candidate repository site are different from those used at Yucca Mountain candidate repository site? 4) How to carry out the public involvement, support from local government and volumtary siting in China? 5) What is the most important in the R and D program of HLW disposal? 6) What shall we do for the future license-application report for the construction of the final repository in China? (author)
Final Environmental Statement related to the operation of Comanche Peak Steam Electric Station, Units 1 and 2 (Docket Nos. 50-445 and 50-446)

International Nuclear Information System (INIS)

1989-10-01

In September 1981, the staff of the Nuclear Regulatory Commission (NRC) issued its Final Environmental Statement (NUREG-0775) related to the operation of Comanche Peak Steam Electric Station, Units 1 and 2 (Docket Nos. 50-445 and 50-446), located in Somervell County, Texas, approximately 40 miles southwest of Fort Worth, Texas. The NRC has prepared this supplement to NUREG-0775 to present its evaluation of the alternative of operating Comanche Peak with the installation of further severe-accident-mitigation design features. The NRC has discovered no substantial changes in the proposed action as previously evaluated in the Final Environmental Statement that are relevant to environmental concerns and bearing on the licensing of Comanche Peak Steam Electric Station, Units 1 and 2. 6 refs., 3 tabs
The text of the agreement between the Agency and Argentina relating to the application of safeguards

International Nuclear Information System (INIS)

1995-01-01

The Agreement between the Republic of Argentina, the Federative Republic of Brazil, the Brazilian-Argentine Agency for Accounting and Control of Nuclear Materials and the International Atomic Energy Agency for the Application of Safeguards came into force on 4 March 1994. As a result of the coming into force of the aforesaid Agreement for Argentina, the application of safeguards under the Agreement of 23 October 1973 between Argentina and the IAEA relating to the application of safeguards has been suspended
Possible generalization of Yang variables for the study of many particle final states

International Nuclear Information System (INIS)

Becker, L.; Schiller, H.

1976-01-01

Starting from a discussion of constraints on invariant variables a generalization of the so called Yang-variables is discussed for the case of 5 and 6 particles in the final states. The obtained Lorentz-invariant variables are ''quasi permutation invariant'' with respect to the final state particles. The influence of Gram determinants is discussed in the context of the application of a cluster algorithm. (author)

31 CFR 223.20 - Final decisions.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Final decisions. 223.20 Section 223.20 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY FINANCIAL MANAGEMENT SERVICE SURETY COMPANIES DOING BUSINESS WITH THE UNITED...
Final/Progress Report for Instrumentation Grant

International Nuclear Information System (INIS)

None

1997-01-01

The major piece of equipment was a Furnace Model 1000 used during the Nitrate to Ammonia and Ceramic (NAC) process to sinter the ceramic final product. NAC is a new technology to immobilize liquid radioactive waste simulants. The grant also funded related control and measuring equipment
Ethical aspects of final disposal. Final report

International Nuclear Information System (INIS)

Baltes, B.; Leder, W.; Achenbach, G.B.; Spaemann, R.; Gerhardt, V.

2003-01-01

In fulfilment of this task the Federal Environmental Ministry has commissioned GRS to summarise the current national and international status of ethical aspects of the final disposal of radioactive wastes as part of the project titled ''Final disposal of radioactive wastes as seen from the viewpoint of ethical objectives''. The questions arising from the opinions, positions and publications presented in the report by GRS were to serve as a basis for an expert discussion or an interdisciplinary discussion forum for all concerned with the ethical aspects of an answerable approach to the final disposal of radioactive wastes. In April 2001 GRS held a one-day seminar at which leading ethicists and philosophers offered statements on the questions referred to above and joined in a discussion with experts on issues of final disposal. This report documents the questions that arose ahead of the workshop, the specialist lectures held there and a summary of the discussion results [de
Some improvements on adaptive genetic algorithms for reliability-related applications

Energy Technology Data Exchange (ETDEWEB)

Ye Zhisheng, E-mail: yez@nus.edu.s [Department of Industrial and Systems Engineering, National University of Singapore, Singapore 119 260 (Singapore); Li Zhizhong [Department of Industrial Engineering, Tsinghua University, beijing 100084 (China); Xie Min [Department of Industrial and Systems Engineering, National University of Singapore, Singapore 119 260 (Singapore)

2010-02-15

Adaptive genetic algorithms (GAs) have been shown to be able to improve GA performance in reliability-related optimization studies. However, there are different ways to implement adaptive GAs, some of which are even in conflict with each other. In this study, a simple parameter-adjusting method using mean and variance of each generation is introduced. This method is used to compare two of such conflicting adaptive GA methods: GAs with increasing mutation rate and decreasing crossover rate and GAs with decreasing mutation rate and increasing crossover rate. The illustrative examples indicate that adaptive GAs with decreasing mutation rate and increasing crossover rate finally yield better results. Furthermore, a population disturbance method is proposed to avoid local optimum solutions. This idea is similar to exotic migration to a tribal society. To solve the problem of large solution space, a variable roughening method is also embedded into GA. Two case studies are presented to demonstrate the effectiveness of the proposed method.
Some improvements on adaptive genetic algorithms for reliability-related applications

International Nuclear Information System (INIS)

Ye Zhisheng; Li Zhizhong; Xie Min

2010-01-01

Adaptive genetic algorithms (GAs) have been shown to be able to improve GA performance in reliability-related optimization studies. However, there are different ways to implement adaptive GAs, some of which are even in conflict with each other. In this study, a simple parameter-adjusting method using mean and variance of each generation is introduced. This method is used to compare two of such conflicting adaptive GA methods: GAs with increasing mutation rate and decreasing crossover rate and GAs with decreasing mutation rate and increasing crossover rate. The illustrative examples indicate that adaptive GAs with decreasing mutation rate and increasing crossover rate finally yield better results. Furthermore, a population disturbance method is proposed to avoid local optimum solutions. This idea is similar to exotic migration to a tribal society. To solve the problem of large solution space, a variable roughening method is also embedded into GA. Two case studies are presented to demonstrate the effectiveness of the proposed method.
Center for Fuel Cell Research and Applications development phase. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-01

The deployment and operation of clean power generation is becoming critical as the energy and transportation sectors seek ways to comply with clean air standards and the national deregulation of the utility industry. However, for strategic business decisions, considerable analysis is required over the next few years to evaluate the appropriate application and value added from this emerging technology. To this end the Houston Advanced Research Center (HARC) is proposing a three-year industry-driven project that centers on the creation of ``The Center for Fuel Cell Research and Applications.`` A collaborative laboratory housed at and managed by HARC, the Center will enable a core group of six diverse participating companies--industry participants--to investigate the economic and operational feasibility of proton-exchange-membrane (PEM) fuel cells in a variety of applications (the core project). This document describes the unique benefits of a collaborative approach to PEM applied research, among them a shared laboratory concept leading to cost savings and shared risks as well as access to outstanding research talent and lab facilities. It also describes the benefits provided by implementing the project at HARC, with particular emphasis on HARC`s history of managing successful long-term research projects as well as its experience in dealing with industry consortia projects. The Center is also unique in that it will not duplicate the traditional university role of basic research or that of the fuel cell industry in developing commercial products. Instead, the Center will focus on applications, testing, and demonstration of fuel cell technology.
IOS SAFETY APPLICATION FOR UITM

Directory of Open Access Journals (Sweden)

MOHAMAD FAHMI HUSSIN

2016-04-01

Full Text Available This paper presents an iOS application, which is developed, to ensure that every task related to safety and health such as inspection, deviation analysis and accident reporting becomes more simple and easier. Normally, these three (3 tasks are done separately and the data are saved in different ways. These situations make the tasks become complicated and consume a lot of time. Therefore, this application is developed to overcome all the problems that occurred. The main objective of this application is to allow the user to handle inspection checklist, deviation analysis and accident reporting efficiently by using iOS devices such as iPhone and iPad. Hence, using iOS device, instead of using a lot of paper, can do all the tasks. Using Xcode SDK, which is the software that is used to develop iOS application, developed this application. Xcode use Objective-C as the programming language, which is quite similar with other programming languages such as C and C++. The final result of this project is that this application can handle all the three (3 tasks and the form or the findings can be emailed to the Safety and Health Officer (SHO. This application will reduce time consume to conduct safety inspection, deviation and reporting tasks as well as avoid delay that might happen while using the traditional method.
Nonlinear Theoretical Tools for Fusion-related Microturbulence: Historical Evolution, and Recent Applications to Stochastic Magnetic Fields, Zonal-flow Dynamics, and Intermittency

Energy Technology Data Exchange (ETDEWEB)

J.A. Krommes

2009-05-19

Fusion physics poses an extremely challenging, practically complex problem that does not yield readily to simple paradigms. Nevertheless, various of the theoretical tools and conceptual advances emphasized at the KaufmanFest 2007 have motivated and/or found application to the development of fusion-related plasma turbulence theory. A brief historical commentary is given on some aspects of that specialty, with emphasis on the role (and limitations) of Hamiltonian/symplectic approaches, variational methods, oscillation-center theory, and nonlinear dynamics. It is shown how to extract a renormalized ponderomotive force from the statistical equations of plasma turbulence, and the possibility of a renormalized K-χ theorem is discussed. An unusual application of quasilinear theory to the problem of plasma equilibria in the presence of stochastic magnetic fields is described. The modern problem of zonal-flow dynamics illustrates a confluence of several techniques, including (i) the application of nonlinear-dynamics methods, especially center-manifold theory, to the problem of the transition to plasma turbulence in the face of self-generated zonal flows; and (ii) the use of Hamiltonian formalism to determine the appropriate (Casimir) invariant to be used in a novel wave-kinetic analysis of systems of interacting zonal flows and drift waves. Recent progress in the theory of intermittent chaotic statistics and the generation of coherent structures from turbulence is mentioned, and an appeal is made for some new tools to cope with these interesting and difficult problems in nonlinear plasma physics. Finally, the important influence of the intellectually stimulating research environment fostered by Prof. Allan Kaufman on the author's thinking and teaching methodology is described.
Chemical approaches toward graphene-based nanomaterials and their applications in energy-related areas.

Science.gov (United States)

Luo, Bin; Liu, Shaomin; Zhi, Linjie

2012-03-12

A 'gold rush' has been triggered all over the world for exploiting the possible applications of graphene-based nanomaterials. For this purpose, two important problems have to be solved; one is the preparation of graphene-based nanomaterials with well-defined structures, and the other is the controllable fabrication of these materials into functional devices. This review gives a brief overview of the recent research concerning chemical and thermal approaches toward the production of well-defined graphene-based nanomaterials and their applications in energy-related areas, including solar cells, lithium ion secondary batteries, supercapacitors, and catalysis. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Applications of decision analysis and related techniques to industrial engineering problems at KSC

Science.gov (United States)

Evans, Gerald W.

1995-01-01

This report provides: (1) a discussion of the origination of decision analysis problems (well-structured problems) from ill-structured problems; (2) a review of the various methodologies and software packages for decision analysis and related problem areas; (3) a discussion of how the characteristics of a decision analysis problem affect the choice of modeling methodologies, thus providing a guide as to when to choose a particular methodology; and (4) examples of applications of decision analysis to particular problems encountered by the IE Group at KSC. With respect to the specific applications at KSC, particular emphasis is placed on the use of the Demos software package (Lumina Decision Systems, 1993).
Final safety evaluation report related to the certification of the System 80{sup +} design (Docket No. 52-002). Volume 2, Chapters 15--22 and appendices

Energy Technology Data Exchange (ETDEWEB)

1994-08-01

This final safety evaluation report (FSER) documents the technical review of the System 80+ standard design by the US Nuclear Regulatory Commission (NRC) staff. The application for the system 80+ design was submitted by Combustion Engineering, Inc., now Asea Brown Boveri-Combustion Engineering (ABB-CE) as an application for design approval and subsequent design certification pursuant to 10 CFR {section} 52.45. System 80+ is a pressurized water reactor with a rated power of 3914 megawatts thermal (MWt) and a design power of 3992 MWt at which accidents are analyzed. Many features of the System 80+ are similar to those of ABB-CE`s System 80 design from which it evolved. Unique features of the System 80+ design include: a large spherical, steel containment; an in-containment refueling water storage tank; a reactor cavity flooding system, hydrogen ignitors and a safety depressurization system for severe accident mitigation; a combustion gas turbine for an alternate ac source; and an advanced digitally based control room. On the basis of its evaluation and independent analyses, the NRC staff concludes that ABB-CE`s application for design certification meets the requirements of Subpart B of 10 CFR Part 52 that are applicable and technically relevant to the System 80+ standard design. This document, Volume 2, contains Chapters 15 through 22 and Appendices A through E.
SIAM Conference on Geometric Design and Computing. Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

None

2002-03-11

The SIAM Conference on Geometric Design and Computing attracted 164 domestic and international researchers, from academia, industry, and government. It provided a stimulating forum in which to learn about the latest developments, to discuss exciting new research directions, and to forge stronger ties between theory and applications. Final Report
Application-related properties of giant magnetostrictive thin films

International Nuclear Information System (INIS)

Lim, S.H.; Kim, H.J.; Na, S.M.; Suh, S.J.

2002-01-01

In an effort to facilitate the utilization of giant magnetostrictive thin films in microdevices, application-related properties of these thin films, which include induced anisotropy, residual stress and corrosion properties, are investigated. A large induced anisotropy with an energy of 6x10 4 J/m 3 is formed in field-sputtered amorphous Sm-Fe-B thin films, resulting in a large magnetostriction anisotropy. Two components of residual stress, intrinsic compressive stress and tensile stress due to the difference of the thermal expansion coefficients between the substrate and thin film, are identified. The variation of residual stress with fabrication parameter and annealing temperature, and its influence on mechanical bending and magnetic properties are examined. Better corrosion properties are observed in Sm-Fe thin films than in Tb-Fe. Corrosion properties of Tb-Fe thin films, however, are much improved with the introduction of nitrogen to the thin films without deteriorating magnetostrictive properties
Hydrothermal Carbonization: Modeling, Final Properties Design and Applications: A Review

Directory of Open Access Journals (Sweden)

Silvia Román

2018-01-01

Full Text Available Active research on biomass hydrothermal carbonization (HTC continues to demonstrate its advantages over other thermochemical processes, in particular the interesting benefits that are associated with carbonaceous solid products, called hydrochar (HC. The areas of applications of HC range from biofuel to doped porous material for adsorption, energy storage, and catalysis. At the same time, intensive research has been aimed at better elucidating the process mechanisms and kinetics, and how the experimental variables (temperature, time, biomass load, feedstock composition, as well as their interactions affect the distribution between phases and their composition. This review provides an analysis of the state of the art on HTC, mainly with regard to the effect of variables on the process, the associated kinetics, and the characteristics of the solid phase (HC, as well as some of the more studied applications so far. The focus is on research made over the last five years on these topics.
Results of data base management system parameterized performance testing related to GSFC scientific applications

Science.gov (United States)

Carchedi, C. H.; Gough, T. L.; Huston, H. A.

1983-01-01

The results of a variety of tests designed to demonstrate and evaluate the performance of several commercially available data base management system (DBMS) products compatible with the Digital Equipment Corporation VAX 11/780 computer system are summarized. The tests were performed on the INGRES, ORACLE, and SEED DBMS products employing applications that were similar to scientific applications under development by NASA. The objectives of this testing included determining the strength and weaknesses of the candidate systems, performance trade-offs of various design alternatives and the impact of some installation and environmental (computer related) influences.
Security Optimization for Distributed Applications Oriented on Very Large Data Sets

Directory of Open Access Journals (Sweden)

Mihai DOINEA

2010-01-01

Full Text Available The paper presents the main characteristics of applications which are working with very large data sets and the issues related to security. First section addresses the optimization process and how it is approached when dealing with security. The second section describes the concept of very large datasets management while in the third section the risks related are identified and classified. Finally, a security optimization schema is presented with a cost-efficiency analysis upon its feasibility. Conclusions are drawn and future approaches are identified.
State child health; revisions to the regulations implementing the State Children's Health Insurance Program. Interim final rule with comment period; revisions, delay of effective date, and technical amendments to final rule.

Science.gov (United States)

2001-06-25

Title XXI authorizes the State Children's Health Insurance Program (SCHIP) to assist State efforts to initiate and expand the provision of child health assistance to uninsured, low-income children. On January 11, 2001 we published a final rule in the Federal Register to implement SCHIP that has not gone into effect. This interim final rule further delays the effective date, revises certain provisions and solicits public comment, and makes technical corrections and clarifications to the January 2001 final rule based on further review of the comments received and applicable law. Only the provisions set forth in this document have changed. All other provisions set forth in the January 2001 final rule will be implemented without change.
Examining the application of Web 2.0 in medical-related organisations.

Science.gov (United States)

Chu, Samuel Kai Wah; Woo, Matsuko; King, Ronnel B; Choi, Stephen; Cheng, Miffy; Koo, Peggy

2012-03-01

This study surveyed Web 2.0 application in three types of selected health or medical-related organisations such as university medical libraries, hospitals and non-profit medical-related organisations. Thirty organisations participated in an online survey on the perceived purposes, benefits and difficulties in using Web 2.0. A phone interview was further conducted with eight organisations (26.7%) to collect information on the use of Web 2.0. Data were analysed using both quantitative and qualitative approaches. Results showed that knowledge and information sharing and the provision of a better communication platform were rated as the main purposes of using Web 2.0. Time constraints and low staff engagement were the most highly rated difficulties. In addition, most participants found Web 2.0 to be beneficial to their organisations. Medical-related organisations that adopted Web 2.0 technologies have found them useful, with benefits outweighing the difficulties in the long run. The implications of this study are discussed to help medical-related organisations make decisions regarding the use of Web 2.0 technologies. © 2011 The authors. Health Information and Libraries Journal © 2011 Health Libraries Group.
Education Intervention on Chronotherapy for Final-Year Pharmacy Students

Directory of Open Access Journals (Sweden)

Gagandeep Kaur

2015-11-01

Full Text Available Chronotherapy involves altering the timing of medication administration in coordination with the body’s circadian rhythms to improve the overall control of disease and to minimise treatment side effects. Training on chronotherapy requires students to map different topics learnt in earlier years of their professional degree and apply these concepts clinically. This requires strategic educational design. Therefore, the aim of the study was to develop, implement and evaluate an educational intervention focusing on the application of chronotherapy for final-year undergraduate pharmacy students. An educational intervention utilizing multiple learning strategies for enhancing chronotherapy related awareness was designed and implemented in the final year undergraduate pharmacy cohort at the University of Sydney Australia (2013. A custom-designed questionnaire measuring awareness about (13 items scored 0 or 1, and attitudes (12 items scored on a Likert scale of 1–5 towards chronotherapy was administered pre and post intervention to evaluate its impact. The pre-intervention mean total awareness and attitude scores were 6.5 ± 2.0 (score range 0–13 and 47.4 ± 6.9 (score range 12–60 respectively. The mean total post-intervention scores were significantly higher for total awareness (10.1 ± 1.9 and attitude (54.0 ± 6.0. Carefully designed educational interventions utilising pedagogic principles for pharmacy students can improve awareness of and enhance positive attitudes toward pharmacists’ roles in optimizing drug therapy using chronotherapy.
Quality attributes for mobile applications

OpenAIRE

Fernandes, João M.; Ferreira, André Leite

2016-01-01

A mobile application is a type of software application developed to run on a mobile device. The chapter discusses the main characteristics of mobile devices, since they have a great impact on mobile applications. It also presents the classification of mobile applications according to two main types: native and web-based applications. Finally, this chapter identifies the most relevant types of quality attributes for mobile applications. It shows that the relevant quality attributes for mobile ...

Commission decision on the Department of Water Resources' Application for Certification for the Bottle Rock Geothermal Project

Energy Technology Data Exchange (ETDEWEB)

1980-11-01

The Application for Certification for the construction of a 55 MW geothermal power plant and related facilities in Lake County was approved subject to terms identified in the Final Decision. The following are covered: findings on compliance with statutory site-certification requirements; final environmental impact report; procedural steps; evidentiary bases; need, environmental resources; public health and safety; plant and site safety and reliability; socioeconomic, land use, and cultural concerns, and transmission tap line. (MHR)
Patient Protection and Affordable Care Act; exchange and insurance market standards for 2015 and beyond. Final rule.

Science.gov (United States)

2014-05-27

This final rule addresses various requirements applicable to health insurance issuers, Affordable Insurance Exchanges (``Exchanges''), Navigators, non-Navigator assistance personnel, and other entities under the Patient Protection and Affordable Care Act and the Health Care and Education Reconciliation Act of 2010 (collectively referred to as the Affordable Care Act). Specifically, the rule establishes standards related to product discontinuation and renewal, quality reporting, non-discrimination standards, minimum certification standards and responsibilities of qualified health plan (QHP) issuers, the Small Business Health Options Program, and enforcement remedies in Federally-facilitated Exchanges. It also finalizes: A modification of HHS's allocation of reinsurance collections if those collections do not meet our projections; certain changes to allowable administrative expenses in the risk corridors calculation; modifications to the way we calculate the annual limit on cost sharing so that we round this parameter down to the nearest $50 increment; an approach to index the required contribution used to determine eligibility for an exemption from the shared responsibility payment under section 5000A of the Internal Revenue Code; grounds for imposing civil money penalties on persons who provide false or fraudulent information to the Exchange and on persons who improperly use or disclose information; updated standards for the consumer assistance programs; standards related to the opt-out provisions for self-funded, non-Federal governmental plans and related to the individual market provisions under the Health Insurance Portability and Accountability Act of 1996 including excepted benefits; standards regarding how enrollees may request access to non-formulary drugs under exigent circumstances; amendments to Exchange appeals standards and coverage enrollment and termination standards; and time-limited adjustments to the standards relating to the medical loss ratio
The importance of governmental control of radioactive sources used in industrial applications

International Nuclear Information System (INIS)

Anna Firpo Fuerth, Q.F.; Beatriz Souto Ameigenda, Q.F.

1998-01-01

Industrial applications of radioactive sources require good management practices dealing with control and registration. In the following case, a special event occurred between two routine inspections: trading. Then a new human factor came into scene: workers with no specific training and knowledge related to radioactive sources. The up going situation triggered emergency procedures. Finally, there were no negative consequences. (author)
Safety requirements applicable to the SMART design

International Nuclear Information System (INIS)

Seul, Kwang Won; Kim, Wee Kyong; Kim, Hho Jung

1999-01-01

The 330 MW thermal power of integral reactor, named SMART (System integrated Modular Advanced ReacTor), is under development at KAERI for seawater desalination application and electricity generation. The final product of nuclear desalination plant (NDP) is electricity and fresh water. Thus, in addition to the protection of the public around the plant facility from the possible release of radioactive materials, the fresh water should be prevented from radioactivity contamination. In this study, to ensure the safety of SMART reactor in the early stage of design development, the safety requirements applicable to the SMART design were investigated, based on the current regulatory requirements for the existing NPPs and the advanced light water reactor (LWR) designs. The interface requirements related to the desalination facility were also investigated, based on the recent IAEA research activities pertaining to the NDP. As a result, it was found that the current regulatory requirements and guidance for the existing NPPs and advanced LWR designs are applicable to the SMART design and its safety evaluation. However, the safety requirements related to the SMART-specific design and the desalination plant are needed to develop in the future to assure the safety of the SMART reactor
The application of information theory for the research of aging and aging-related diseases.

Science.gov (United States)

Blokh, David; Stambler, Ilia

2017-10-01

This article reviews the application of information-theoretical analysis, employing measures of entropy and mutual information, for the study of aging and aging-related diseases. The research of aging and aging-related diseases is particularly suitable for the application of information theory methods, as aging processes and related diseases are multi-parametric, with continuous parameters coexisting alongside discrete parameters, and with the relations between the parameters being as a rule non-linear. Information theory provides unique analytical capabilities for the solution of such problems, with unique advantages over common linear biostatistics. Among the age-related diseases, information theory has been used in the study of neurodegenerative diseases (particularly using EEG time series for diagnosis and prediction), cancer (particularly for establishing individual and combined cancer biomarkers), diabetes (mainly utilizing mutual information to characterize the diseased and aging states), and heart disease (mainly for the analysis of heart rate variability). Few works have employed information theory for the analysis of general aging processes and frailty, as underlying determinants and possible early preclinical diagnostic measures for aging-related diseases. Generally, the use of information-theoretical analysis permits not only establishing the (non-linear) correlations between diagnostic or therapeutic parameters of interest, but may also provide a theoretical insight into the nature of aging and related diseases by establishing the measures of variability, adaptation, regulation or homeostasis, within a system of interest. It may be hoped that the increased use of such measures in research may considerably increase diagnostic and therapeutic capabilities and the fundamental theoretical mathematical understanding of aging and disease. Copyright © 2016 Elsevier Ltd. All rights reserved.
Final environmental statement related to construction of Midland Plant, Units 1 and 2 (Docket Nos. 50-329 and 50-330)

International Nuclear Information System (INIS)

1977-01-01

This is a Final Detailed Statement on Environmental Considerations associated with construction and operation of Midland Plant Units 1 and 2 at Midland, Michigan, pursuant to a construction permit and operating license which has been applied for by the Consumers Power Company. The application is under review by the US Atomic Energy Commission's Regulatory Staff. The environmental impact, including adverse and beneficial effects, of the Midland Plant includes reassignment of use of about 1100 acres of agricultural and residential land for the cooling pond (the plant buildings are located on industrial zoned land); this resulted in the dislocation of approximately 25 residences and relocation of the Midland County Farm to a newly built structure; the destruction of a maximum of 4400 tons of phytoplankton per year at the intake of makeup water from the Tittabawassee River; and a predicted small increase in fogging effects in the near vicinity of the cooling pond. 34 refs., 19 figs., 26 tabs
Aspects of the application of issue Estoppel on directors’ fiduciary duties in South Africa: possible lessons from the United Kingdom and related jurisdictions Royal Sechaba case

Directory of Open Access Journals (Sweden)

Howard Chitimira

2017-10-01

Full Text Available The doctrine of estoppel precludes a person (asserter from asserting something different or contrary to what is implied by a previous action, conduct or statement of that person or by a previous pertinent judicial determination. While there are various types of estoppel, this article is primarily focused on the application of issue estoppel in relation to certain aspects of the directors’ fiduciary duties in South Africa (s 76 of the Companies Act 71 of 2008 (Companies Act 2008, in light of the judgment in Royal Sechaba v Coote (366/2013 [2014] ZASCA 85 (30 May 2014 (Royal Sechaba case. Issue estoppel could be defined to include instances where a person is precluded from re-litigating or raising a particular issue in a cause of action that was previously decided by a final judgment of a competent court between the same parties in future cases that have a different cause of action involving such parties. Issue estoppel is closely related to res judicata. For instance,both issue estoppel and res judicata are generally aimed at preventing the re-litigation of the same issues and same cause of actions that were previously decided by a final judgment in the relevant courts between same parties. Nonetheless, it is widely acknowledged that the application these two concepts is quite different in practice. For instance, some jurisdictions such as the United Kingdom (UK and South Africa employs English law and Roman-Dutch law (common law principles respectively, to distinguish between issue estoppel and res judicata. Likewise, similar common law principles are employed in the United States of America (USA, Canada and Australia to distinguish res judicata and issue estoppel in various ways. For example, issue estoppel is sometimes referred to as collateral estoppel, issue preclusion, claim preclusion or cause of action estoppel in USA, Canada and Australia. Despite this, it should be noted that a detailed discussion of the different requirements, merits
Surface applicators for high dose rate brachytherapy in AIDS-related kaposi's sarcoma

International Nuclear Information System (INIS)

Evans, Michael D.C.; Yassa, Mariam; Podgorsak, Ervin B.; Roman, Ted N.; Schreiner, L. John; Souhami, Luis

1997-01-01

Purpose: The development of commercially available surface applicators using high dose rate remote afterloading devices has enabled radiotherapy centers to treat selected superficial lesions using a remote afterloading brachytherapy unit. The dosimetric parameters of these applicators, the clinical implementation of this technique, and a review of the initial patient treatment regimes are presented. Methods and Materials: A set of six fixed-diameter (1, 2, and 3 cm), tungsten/steel surface applicators is available for use with a single stepping-source (Ir-192, 370 GBq) high dose rate afterloader. The source can be positioned either in a parallel or perpendicular orientation to the treatment plane at the center of a conical aperture that sits at an SSD of approximately 15 mm and is used with a 1-mm thick removable plastic cap. The surface dose rates, percent depth dose, and off-axis ratios were measured. A custom-built, ceiling-mounted immobilization device secures the applicator on the surface of the patient's lesion during treatment. Results: Between November 1994, and September 1996, 16 AIDS-related Kaposi's sarcoma patients having a total of 120 lesions have been treated with palliative intent. Treatment sites were distributed between the head and neck, extremity, and torso. Doses ranged from 8 to 20 Gy, with a median dose of 10 Gy delivered in a single fraction. Treatments were well tolerated with minimal skin reaction, except for patients with lesions treated to 20 Gy who developed moderate/severe desquamation. Conclusion: Radiotherapy centers equipped with a high dose rate remote afterloading unit may treat small selected surface lesions with commercially available surface applicators. These surface applicators must be used with a protective cap to eliminate electron contamination. The optimal surface dose appears to be either 10 or 15 Gy depending upon the height of the lesion
Project to design and develop an energy-related program: For public housing residents and renters: Volume 1, Final report

Energy Technology Data Exchange (ETDEWEB)

1988-05-01

This demonstration project was undertaken as a result of an unsolicited proposal submitted by THE ASSIGNMENT GROUP (TAG) to the Office of Minority Economic Impact, Department of Energy (DOE). The problem to which the proposal responded was how to minimize the costs associated with public housing tenants in standard public housing as well as under homeownership transfers. A related problem was how to graduate the tenants to another level of responsibility and self-sufficiency through resident business developments and training in energy-related fields. The size and gravity of the problem necessitated a purpose or aim that had nationwide application, yet lent itself to a microscopic look. Consequently, the goal that emanated was the design and development of an energy-related demonstration program that educates public housing residents, facilitates indigenous business development where appropriate, and trains residents to provide needed services.
Forecasting of the incorporated energy in the final demand of the brazilian economy in 2005

International Nuclear Information System (INIS)

Cunha, Marcelo Pereira da; Pereira, Jose Tomaz Vieira

2008-01-01

This work presents the application of a methodology for evaluation of the primary energy incorporated by the productive sectors of a economy at the final demand - using of a income-product mode. A methodology is applied in the evaluation of the energy incorporated to 25 sectors of the brazilian economy, by using the the data available in the national counts (IBGE - 2007), and the National Energy Balance for the year 2005 (EPE - 2007). For each sector, the results are presented in terms of the primary energy incorporated (in petroleum equivalent tons per R$ 1,000), of the participation of renewable energy, and the total primary energy distribution for the offered products by the 25 sectors to be consumption by the final demand. Among some interesting results in terms of final demand, it is highlighted the presence of 96.5% of renewable primary energy for the sector of alcohol, and 5.3% for the sector of petroleum refining products sector. In terms of the total energy distribution,the petroleum refining and coke sector were the most significant contribution to the incorporation of primary energy, presenting 16.1% of the total ahead of foods and beverages which presents 12.1%. Related to the final demand components, families consumption was responsible by the 57.7% of the total, the exports with 25.3%, the gross capital formation (investments and stock variations) with 11.3%, and the govern consumption wit 5.7%
Novel Designs for Application Specific MEMS Pressure Sensors

Directory of Open Access Journals (Sweden)

Erik V. Thomsen

2010-10-01

Full Text Available In the framework of developing innovative microfabricated pressure sensors, we present here three designs based on different readout principles, each one tailored for a specific application. A touch mode capacitive pressure sensor with high sensitivity (14 pF/bar, low temperature dependence and high capacitive output signal (more than 100 pF is depicted. An optical pressure sensor intrinsically immune to electromagnetic interference, with large pressure range (0–350 bar and a sensitivity of 1 pm/bar is presented. Finally, a resonating wireless pressure sensor power source free with a sensitivity of 650 KHz/mmHg is described. These sensors will be related with their applications in harsh environment, distributed systems and medical environment, respectively. For many aspects, commercially available sensors, which in vast majority are piezoresistive, are not suited for the applications proposed.
The applicability of Relative Floristic Resemblance to evaluate the conservation value of protected areas.

NARCIS (Netherlands)

Wieringa, J.J.; Sosef, M.S.M.

2011-01-01

s – It is important to know the contribution of a protected area to global conservation. A new method called ‘Relative Floristic Resemblance’ that uses databased and georeferenced herbarium specimens, is introduced. Its usefulness and applicability to assess the conservation value of protected areas
Medicaid and Children's Health Insurance Programs: essential health benefits in alternative benefit plans, eligibility notices, fair hearing and appeal processes, and premiums and cost sharing; exchanges: eligibility and enrollment. Final rule.

Science.gov (United States)

2013-07-15

This final rule implements provisions of the Patient Protection and Affordable Care Act and the Health Care and Education Reconciliation Act of 2010 (collectively referred to as the Affordable Care Act. This final rule finalizes new Medicaid eligibility provisions; finalizes changes related to electronic Medicaid and the Children's Health Insurance Program (CHIP) eligibility notices and delegation of appeals; modernizes and streamlines existing Medicaid eligibility rules; revises CHIP rules relating to the substitution of coverage to improve the coordination of CHIP coverage with other coverage; and amends requirements for benchmark and benchmark-equivalent benefit packages consistent with sections 1937 of the Social Security Act (which we refer to as ``alternative benefit plans'') to ensure that these benefit packages include essential health benefits and meet certain other minimum standards. This rule also implements specific provisions including those related to authorized representatives, notices, and verification of eligibility for qualifying coverage in an eligible employer-sponsored plan for Affordable Insurance Exchanges. This rule also updates and simplifies the complex Medicaid premium and cost sharing requirements, to promote the most effective use of services, and to assist states in identifying cost sharing flexibilities. It includes transition policies for 2014 as applicable.
Commercial grade item (CGI) dedication of MDR relays for nuclear safety related applications

Science.gov (United States)

Das, Ranjit K.; Julka, Anil; Modi, Govind

1994-08-01

MDR relays manufactured by Potter & Brumfield (P&B) have been used in various safety related applications in commercial nuclear power plants. These include emergency safety features (ESF) actuation systems, emergency core cooling systems (ECCS) actuation, and reactor protection systems. The MDR relays manufactured prior to May 1990 showed signs of generic failure due to corrosion and outgassing of coil varnish. P&B has made design changes to correct these problems in relays manufactured after May 1990. However, P&B does not manufacture the relays under any 10CFR50 Appendix B quality assurance (QA) program. They manufacture the relays under their commercial QA program and supply these as commercial grade items. This necessitates CGI Dedication of these relays for use in nuclear-safety-related applications. This paper presents a CGI dedication program that has been used to dedicate the MDR relays manufactured after been used to dedicate the MDR relays manufactured after May 1990. The program is in compliance with current Nuclear Regulatory Commission (NRC) and Electric Power Research Institute (EPRI) guidelines and applicable industry standards; it specifies the critical characteristics of the relays, provides the tests and analysis required to verify the critical characteristics, the acceptance criteria for the test results, performs source verification to quality P&B for its control of the critical characteristics, and provides documentation. The program provides reasonable assurance that the new MDR relays will perform their intended safety functions.
PSA applications. Good practices and documentation

International Nuclear Information System (INIS)

Dewailly, J.; Magne, L.

1997-10-01

In this paper, it is shown what the condensed documentation of the main strategic choices and technical assumptions related to a PSA could contain: how to select the internal and external initiating events, how the detail the plant configuration and the general organization of the plant and operating staff, how to highlight the assumptions related to physical models, etc. The proposals in this documentation are based on the R and D D's experience with PSA (construction of PSA models, use of PSA models for operation or maintenance, PSA tools). This document also presents different types of rules or recommendations related to PSA modelling for various applications involved in nuclear power plant operating. Finally, the paper stresses the main difficulties encountered (appropriate use of uncertainties, communication of PSA results to non-specialist users) and it also outlines some prospects for the future. (author)
Case study applications of venture analysis: fluidized bed. Final report

Energy Technology Data Exchange (ETDEWEB)

Mosle, R.

1978-05-01

In order to appraise the case for government intervention in the case of atmospheric fluid-bed combustion, Energy Resources Company and Rotan Mosle have developed a methodology containing four key elements. The first is an economic and environmental characterization of the new technology; the second, a survey of its prospective users and vendors; the third, a cost-benefit analysis of its prospective social benefits; and the fourth, an analytical model of its market penetration and the effects thereon of a basket of government incentives. Three major technical obstacles exist to continued AFBC development: feeding coal and limestone reliably to the boiler, tube erosion and corrosion, and developing boiler turndown capability. The review of the economic, environmental and technical attributes of the new technology has suggested that the preliminary venture can be selected with confidence as a commercial prospect capable of detailed evaluation from both private and public perspectives. The venture choice can therefore be considered firm: it will be the equipment required for the combustion of coal in atmospheric fluid beds as applied to industrial process steam in boilers of at least 83 Kpph capacity. The most effective demonstration of the potential of AFBC in the eyes of prospective industrial users is that provided by a project conducted by the private sector with minimal government direction. Unlike the ''experimental'' style of existing mixed public-private demonstration projects, the pressure to achieve reliability in more commercial applications would serve rapidly to reveal more clearly the potential of AFBC. The marketplace can be allowed to decide its fate thereafter. Once AFBC has been successfully demonstrated, the relative merits of AFBC and coal-FGD are best left to prospective users to evaluate.
DISK GALAXY SCALING RELATIONS IN THE SFI++: INTRINSIC SCATTER AND APPLICATIONS

International Nuclear Information System (INIS)

Saintonge, Amelie; Spekkens, Kristine

2011-01-01

We study the scaling relations between the luminosities, sizes, and rotation velocities of disk galaxies in the SFI++, with a focus on the size-luminosity (RL) and size-rotation velocity (RV) relations. Using isophotal radii instead of disk scale lengths as a size indicator, we find relations that are significantly tighter than previously reported: the correlation coefficients of the template RL and RV relations are r = 0.97 and r= 0.85, respectively, which rival that of the more widely studied LV (Tully-Fisher) relation. The scatter in the SFI++ RL relation is 2.5-4 times smaller than previously reported for various samples, which we attribute to the reliability of isophotal radii relative to disk scale lengths. After carefully accounting for all measurement errors, our scaling relation error budgets are consistent with a constant intrinsic scatter in the LV and RV relations for velocity widths log W ∼> 2.4, with evidence for increasing intrinsic scatter below this threshold. The scatter in the RL relation is consistent with constant intrinsic scatter that is biased by incompleteness at the low-L end. Possible applications of the unprecedentedly tight SFI++ RV and RL relations are investigated. Just like the Tully-Fisher relation, the RV relation can be used as a distance indicator: we derive distances to galaxies with primary Cepheid distances that are accurate to 25%, and reverse the problem to measure a Hubble constant H 0 = 72 ± 7 km s -1 Mpc -1 . Combining the small intrinsic scatter of our RL relation (ε int = 0.034 ± 0.001log [h -1 kpc]) with a simple model for disk galaxy formation, we find an upper limit in the range of disk spin parameters that is a factor of ∼7 smaller than that of the halo spin parameters predicted by cosmological simulations. This likely implies that the halos hosting Sc galaxies have a much narrower distribution of spin parameters than previously thought.
13 CFR 108.380 - Final approval as a NMVC Company.

Science.gov (United States)

2010-01-01

... VENTURE CAPITAL (âNMVCâ) PROGRAM Evaluation and Selection of NMVC Companies § 108.380 Final approval as a... amount of Regulatory Capital set forth in its application, pursuant to § 108.310(a)(1); and (B) The... at least 30 percent of its Regulatory Capital if the Conditionally Approved NMVC Company— (i) Already...
The final size of an epidemic and its relation to the basic reproduction number

DEFF Research Database (Denmark)

Andreasen, Viggo

2011-01-01

We study the final size equation for an epidemic in a subdivided population with general mixing patterns among subgroups. The equation is determined by a matrix with the same spectrum as the next generation matrix and it exhibits a threshold controlled by the common dominant eigenvalue, the basic...
Final report on LDRD project : coupling strategies for multi-physics applications.

Energy Technology Data Exchange (ETDEWEB)

Hopkins, Matthew Morgan; Moffat, Harry K.; Carnes, Brian; Hooper, Russell Warren; Pawlowski, Roger P.

2007-11-01

Many current and future modeling applications at Sandia including ASC milestones will critically depend on the simultaneous solution of vastly different physical phenomena. Issues due to code coupling are often not addressed, understood, or even recognized. The objectives of the LDRD has been both in theory and in code development. We will show that we have provided a fundamental analysis of coupling, i.e., when strong coupling vs. a successive substitution strategy is needed. We have enabled the implementation of tighter coupling strategies through additions to the NOX and Sierra code suites to make coupling strategies available now. We have leveraged existing functionality to do this. Specifically, we have built into NOX the capability to handle fully coupled simulations from multiple codes, and we have also built into NOX the capability to handle Jacobi Free Newton Krylov simulations that link multiple applications. We show how this capability may be accessed from within the Sierra Framework as well as from outside of Sierra. The critical impact from this LDRD is that we have shown how and have delivered strategies for enabling strong Newton-based coupling while respecting the modularity of existing codes. This will facilitate the use of these codes in a coupled manner to solve multi-physic applications.

A Study of Job Demands and Curriculum Development in Agricultural Training Related to the Muskegon County Wastewater Management System. Final Report. Volume I. An Overview of the Research Project.

Science.gov (United States)

Fisher, Harold S.; And Others

This volume is one of a four-volume final report of a research project developed to identify the jobs and training needs for the area of wastewater land treatment systems and related agricultural occupations. The overall purpose of the project is presented in terms of its six subobjectives: (1) To identify the agricultural occupations related to…
The Finnish final disposal programme proceeds to the site selection

International Nuclear Information System (INIS)

Seppaelae, T.

1999-01-01

Research for the selection of the final disposal site has been carried out already since the beginning of 1980's. Field studies were started in 1987: In the recent years, studied sites have included Olkiluoto in Eurajoki, Haestholmen in Loviisa, Romuvaara in Kuhmo and Kivetty in Aeaenekoski. Based on 40 years operation of four power plant units, the estimate for the accumulation of spent fuel to be disposed of in Finland is 2,600 tU. A 'Decision in Principle' is needed from the Finnish government to select the final disposal site, Posiva submitted the application for a policy decision in May 1999. The intended site of the facility is Olkiluoto which produces most of the spent fuel in Finland: A disposal would minimise the need of transports. In a poll among the inhabitants of Eurajoki, 60 per cent approved the final disposal facility. After a positive decision of the government, Posiva will construct an underground research facility in Olkiluoto. The construction of the final disposal facility will take place in the 2010's, the facility should be operational in 2020. (orig.) [de
A cost summary applicable to seismic construction and maintenance of nuclear safety related piping

International Nuclear Information System (INIS)

Stevenson, J.D.

1995-01-01

This paper presents a summary of costs applicable to nuclear power plant piping for an earthquake defined as 0.2 SSE-PGA as a function of three eras of initial construction: 1967--1974, 1974--1981 and 1981--1990. Costs have been presented for both new construction and maintenance in operating plants using both the original PSAR-FSAR design criteria and current SRP requirements. It is recommended that the cost information contained in this report be considered in evaluating the cost benefit relationships associated with current and proposed future changes in seismic design procedures applicable to safety-related piping systems
Energy-related inventions program invention 637. Final technical report

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-07-31

The final technical report for the Pegasus plow, a stalk and root embedding apparatus, describes progress from the development stage to the product support stage. The US Department of Agriculture - Agriculture Research Service (ARS) is now in the second year of a three year study comparing the Pegasus to conventional tillage. So far, no downside has been with the Pegasus and the following benefits have been documented: (1) Energy savings of 65.0 kilowatt hours per hectare over conventional tillage. This is when the Pegasus plow is used to bury whole stalks, and represents a 70% savings over conventional tillage (92.5 kilowatt hours per hectare). (2) Four to seven fewer passes of tillage, depending on the particular situation. This represents a substantial time savings to farmers. (3) So far, no differences in cotton yields. Recent cotton boll counts in one study indicate a higher yield potential with the Pegasus. (4) No disease problems. (5) Significantly higher levels of organic matter in the soil. A hypothesis of the study is that whole stalk burial may reduce plant disease problems. This hypothesis has not yet been proven. (6) Significantly higher levels of nitrate nitrogen. Total nitrogen and ammonia nitrogen trended higher but were not significantly different. This shows that whole stalk burial does not adversely affect the nitrogen cycle in the soil and may actually improve it. The marketing support stage of the project is also described in the report.
Psychological, situational and application-related determinants of the intention to self-test: a factorial survey among students.

Science.gov (United States)

Kuecuekbalaban, Pinar; Rostalski, Tim; Schmidt, Silke; Muehlan, Holger

2017-07-10

The Internet enables an unprecedented opportunity to access a broad range of self-tests (e.g. testing for HIV, cancer, hepatitis B/C), which can be conducted by lay consumers without the help of a health professional. However, there is only little knowledge about the determinants of the use of self-tests. Thus, the aims of this study were (1) to experimentally investigate the impact of situational and application-related characteristics on the intention to use a self-test (ST), compared to being tested by a health professional at home (HPH) or at a doctor's office (HPD), (2) to examine the applicability of social-cognitive health behaviour theories on self-testing, and (3) to explore the advantages of integrating technological affinity into social-cognitive health behaviour models to predict self-testing. In a factorial survey, 1248 vignettes were rated by 208 students. The core concepts of social-cognitive health behaviour theories, technological affinity, and different situational and application-related characteristics were investigated. Intention to ST was only predicted by the medical expertise of the tested person, while HPH and HPD were also associated with the application purpose of the test and the presence of an emotionally supporting person. Perceived severity and outcome-expectancy significantly predicted intention to self-test. Technological enthusiastic people had a higher intention to use a self-test. Intention to ST, HPH and HPD were predicted by different situational and application-related characteristics. Social-cognitive health behaviour theories can be applied to predict self-testing and do not need to be extended by technological affinity.
Innovations and pitfalls in the use of wearable devices in the prevention and rehabilitation of running related injuries.

Science.gov (United States)

Willy, Richard W

2018-01-01

Running-related injuries are common and are associated with a high rate of reoccurrence. Biomechanics and errors in applied training loads are often cited as causes of running-related injuries. Clinicians and runners are beginning to utilize wearable technologies to quantify biomechanics and training loads with the hope of reducing the incidence of running-related injuries. Wearable devices can objectively assess biomechanics and training loads in runners, yet guidelines for their use by clinicians and runners are not currently available. This article outlines several applications for the use of wearable devices in the prevention and rehabilitation of running-related injuries. Applications for monitoring of training loads, running biomechanics, running epidemiology, return to running programs and gait retraining are discussed. Best-practices for choosing and use of wearables are described to provide guidelines for clinicians and runners. Finally, future applications are outlined for this rapidly developing field. Copyright © 2017 Elsevier Ltd. All rights reserved.
The dynamics of lake, bog, and bay - Consequences of exposure to man related to final storage of spent nuclear fuel

International Nuclear Information System (INIS)

Agnedal, P.O.; Andersson, K.; Evans, S.; Sundblad, B.; Tham, G.; Wilkens, A.B.

1984-12-01

The natural aging of the environment, much shorter than a possible continuous release from a repository, results in uncertainties as regards to consequences of exposure to man related to final storage of spent fuel. The Phase I project summarizes the identification of such factors and parameters of predominant importance for an assessment of possible radiological consequences in a normally revolving biosphere. Three major areas are described: geomorphology and residence time such as phenomena associated with the formation of lakes in Sweden formed by the latest inland ice, lake development in terms of uptake of different elements and radionuclides as a function of the chemical composition of the water in a recipient and some aspects of sedimentation in lakes and coastal waters. The chemical environment is also studied in the evolution of a lake or a Baltic bay into farming land or peat land. The most important parameters to the behaviour of trace metal ions seem to be pH, Eh, ionic strength and content of complex formers. Finally, the human impact during the evolution of a lake or a bay is discussed. The study also includes recommendation for a reference field test area and for laboratory studies of the chemical properties of radionuclides in sediments in a Phase 2 project. (Author)
Final environmental statement, Liquid Metal Fast Breeder Reactor Program. Volume 1

International Nuclear Information System (INIS)

1975-12-01

Information is presented under the following section headings: LMFBR program options and their compatibility with the major issues affecting commercial development, Proposed Final Environmental Statement for the LMFBR program, December 1974, WASH-1535, supplemental material, and material relating to Proposed Final Environmental Statement review
Nonlinear equation of the modes in circular slab waveguides and its application.

Science.gov (United States)

Zhu, Jianxin; Zheng, Jia

2013-11-20

In this paper, circularly curved inhomogeneous waveguides are transformed into straight inhomogeneous waveguides first by a conformal mapping. Then, the differential transfer matrix method is introduced and adopted to deduce the exact dispersion relation for modes. This relation itself is complex and difficult to solve, but it can be approximated by a simpler nonlinear equation in practical applications, which is close to the exact relation and quite easy to analyze. Afterward, optimized asymptotic solutions are obtained and act as initial guesses for the following Newton's iteration. Finally, very accurate solutions are achieved in the numerical experiment.
Portable linear accelerator development. Final report

International Nuclear Information System (INIS)

Schonberg, R.G.

1983-01-01

The final report on Project RP 822-6 describes the MINAC 3 development from the recognition of need for a lightweight, portable high-energy device to the successful completion and field use of the MINAC. MINAC, which represents a substantial improvement in field radiographic capability and in technology, rapidly transitioned from proof-of-principle (1978 to 1980) to field-proven product (1980 to 1981). As a result, the decision has been made to develop this report as a users guide as well as a historic record of design, development, and testing program. The first section of this report has the following principal objectives: to describe the existing MINAC equipment capabilities and achievable modifications; to provide applications information for prospective users; and to provide technical information on high-energy radiography useful for familiarization and planning. The users guide section is followed by sections which describe the design basis, development, and application history of MINAC through the course of EPRI RP822 research projects 1 to 5, inclusively
EU-Russia Cultural Relations

Directory of Open Access Journals (Sweden)

Elena Sidorova

2014-05-01

Full Text Available This article analyzes the link between culture and diplomacy between Russia and the European Union, and shows the importance of cultural relations. It examines the common space of science, education and culture introduced at the 2003 EU-Russia Summit in St. Petersburg and the application of the principles of this concept that were established at the 2005 EU-Russia Summit in Moscow. It then considers EU-Russia collaboration on humanitarian action and the challenges that both parties face in this sphere. It also explains the formation of EU domestic and foreign cultural policy, and the role of European institutions and states in cultural affairs and diplomacy, as well as key elements and mechanisms of contemporary Russian foreign cultural policy. In addition, the article focuses on the European side of post-Soviet EU-Russia cultural relations. This cultural collaboration is defined as a competitive neighbourhood. EU and Russian interests collide: while Europeans try to promote their values, norms and standards within the framework of the European Neighbourhood Policy, Russia seeks to culturally influence and engage in this region for geostrategic and historical reasons. Finally, the article assesses the prospects for the EU-Russia cultural relations and emphasizes the role of ideology in improving such relations.
Quantum mechanics from general relativity

International Nuclear Information System (INIS)

Sachs, M.

1986-01-01

A generalization of quantum mechanics is demonstrated in the context of general relativity, following from a generally covariant field theory of inertia. Nonrelativistically, the formalism corresponds with linear quantum mechanics. In the limit of special relativity, nonlinearity remains and several new features are derived: (1) Particle-antiparticle pairs do not annihilate; an exact bound state solution is derived corresponding with all experimental facts about annihilation/creation - which, in approximation, gives the blackbody radiation spectrum for a sea of such pairs. (2) A result is proven, without approximation, that is physically equivalent to the Pauli exclusion principle - which, in linear approximation, gives the totally antisymmetrised many-body wave function and Fermi-Dirac statistics. (3) The hydrogen spectrum is derived, including the Lamb shifts, in agreement with experiment; new results are found for high energy electron-proton scattering. (4) Finally, several applications to the elementary particle domain are demonstrated, in agreement with results from experimental high energy physics. (Auth.)
Dispersion relations in loop calculations

International Nuclear Information System (INIS)

Kniehl, B.A.

1996-01-01

These lecture notes give a pedagogical introduction to the use of dispersion relations in loop calculations. We first derive dispersion relations which allow us to recover the real part of a physical amplitude from the knowledge of its absorptive part along the branch cut. In perturbative calculations, the latter may be constructed by means of Cutkosky's rule, which is briefly discussed. For illustration, we apply this procedure at one loop to the photon vacuum-polarization function induced by leptons as well as to the γf anti-f vertex form factor generated by the exchange of a massive vector boson between the two fermion legs. We also show how the hadronic contribution to the photon vacuum polarization may be extracted from the total cross section of hadron production in e + e - annihilation measured as a function of energy. Finally, we outline the application of dispersive techniques at the two-loop level, considering as an example the bosonic decay width of a high-mass Higgs boson. (author)
Recent trends related to the use of formal methods in software engineering

Science.gov (United States)

Prehn, Soren

1986-01-01

An account is given of some recent developments and trends related to the development and use of formal methods in software engineering. Ongoing activities in Europe are focussed on, since there seems to be a notable difference in attitude towards industrial usage of formal methods in Europe and in the U.S. A more detailed account is given of the currently most widespread formal method in Europe: the Vienna Development Method. Finally, the use of Ada is discussed in relation to the application of formal methods, and the potential for constructing Ada-specific tools based on that method is considered.
Safety Evaluation Report related to the final design approval of the GESSAR II BWR/6 Nuclear Island Design (Docket No. 50-447). Supplement No. 3

International Nuclear Information System (INIS)

1985-01-01

Supplement 3 to the Safety Evaluation Report (SER) for the application filed by General Electric Company for the final design approval for the GE BWR/6 nuclear island design has been prepared by the Office of Nuclear Reactor Regulation of the Nuclear Regulatory Commission. This report supplements the GESSAR II SER (NUREG-0979), issued in April 1983, summarizing the results of the staff's safety review of the GESSAR II BWR/6 nuclear island design. Subject to favorable resolution of the items discussed in this supplement, the staff concludes that the GESSAR II design satisfactorily addresses the severe-accident concerns described in draft NUREG-1070
Phototoxicity and antipsoriatic effect of a topical methoxypsoralen solution in relation to the application time

DEFF Research Database (Denmark)

Meffert, H; Andersen, Klaus Ejner; Sönnichsen, N

1984-01-01

The phototoxicity and antipsoriatic activity of a topically applied 0.075% methoxypsoralen alcohol-glycerol solution was investigated in relation to the interval between drug application and irradiation. On healthy skin, maximum UVA sensitivity for erythema development appeared 40 to 60 min after...... the application of the methoxypsoralen solution, but in psoriatic plaques the antipsoriatic UVA sensitization reached its maximum after 10 to 20 min. This difference between induction of antipsoriatic effect and erythema sensitivity may be explained by rapid penetration of methoxypsoralen in psoriatic lesions...
Synthesis, Properties, and Applications of Low-Dimensional Carbon-Related Nano materials

International Nuclear Information System (INIS)

Mostofizadeh, A.; Li, Y.; Song, B.; Huang, Y.; Mostofizadeh, A.

2011-01-01

In recent years, many theoretical and experimental studies have been carried out to develop one of the most interesting aspects of the science and nano technology which is called carbon-related nano materials. The goal of this paper is to provide a review of some of the most exciting and important developments in the synthesis, properties, and applications of low-dimensional carbon nano materials. Carbon nano materials are formed in various structural features using several different processing methods. The synthesis techniques used to produce specific kinds of low-dimensional carbon nano materials such as zero-dimensional carbon nano materials (including fullerene, carbon-encapsulated metal nanoparticles, nano diamond, and onion-like carbons), one-dimensional carbon nano materials (including carbon nano fibers and carbon nano tubes), and two-dimensional carbon nano materials (including graphene and carbon nano walls) are discussed in this paper. Subsequently, the paper deals with an overview of the properties of the mainly important products as well as some important applications and the future outlooks of these advanced nano materials.
Summer 1994 Computational Science Workshop. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

This report documents the work performed by the University of New Mexico Principal Investigators and Research Assistants while hosting the highly successful Summer 1994 Computational Sciences Workshop in Albuquerque on August 6--11, 1994. Included in this report is a final budget for the workshop, along with a summary of the participants` evaluation of the workshop. The workshop proceeding have been delivered under separate cover. In order to assist in the organization of future workshops, we have also included in this report detailed documentation of the pre- and post-workshop activities associated with this contract. Specifically, we have included a section that documents the advertising performed, along with the manner in which applications were handled. A complete list of the workshop participants in this section. Sample letters that were generated while dealing with various commercial entities and departments at the University are also included in a section dealing with workshop logistics. Finally, we have included a section in this report that deals with suggestions for future workshops.
Intersatellite Link (ISL) application to commercial communications satellites. Volume 2: Technical final report

Science.gov (United States)

Young, S. Lee

1987-01-01

Intersatellite Link (ISL) applications can improve and expand communication satellite services in a number of ways. As the demand for orbital slots within prime regions of the geostationary arc increases, attention is being focused on ISLs as a method to utilize this resource more efficiently and circumvent saturation. Various GEO-to-GEO applications were determined that provide potential benefits over existing communication systems. A set of criteria was developed to assess the potential applications. Intersatellite link models, network system architectures, and payload configurations were developed. For each of the chosen ISL applications, ISL versus non-ISL satellite systems architectures were derived. Both microwave and optical ISL implementation approaches were evaluated for payload sizing and cost analysis. The technological availability for ISL implementations was assessed. Critical subsystems technology areas were identified, and an estamate of the schedule and cost to advance the technology to the requiered state of readiness was made.
The effect of increasing levels of embedded generation on the distribution network. Final report

Energy Technology Data Exchange (ETDEWEB)

Collinson, A; Earp, G K; Howson, D; Owen, R D; Wright, A J

1999-10-01

This report was commissioned as part of the EA Technology Strategic Technology Programme under guidance of the Module 5 (Embedded Generation) Steering Group. This report aims to provide information related to the distribution and supply of electricity in the context of increasing levels of embedded generation. There is a brief description of the operating environment within which electricity companies in the UK must operate. Technical issues related to the connection of generation to the existing distribution infrastructure are highlighted and the design philosophy adopted by network designers in accommodating applications for the connection of embedded generation to the network is discussed. The effects embedded generation has on the network and the issues raised are presented as many of them present barriers to the connection of embedded generators. The final chapters cover the forecast of required connection to 2010 and solutions to restrictions preventing the connection of more embedded generation to the network. (author)

Application of logical analysis of data to machinery-related accident prevention based on scarce data

International Nuclear Information System (INIS)

Jocelyn, Sabrina; Chinniah, Yuvin; Ouali, Mohamed-Salah; Yacout, Soumaya

2017-01-01

This paper deals with the application of Logical Analysis of Data (LAD) to machinery-related occupational accidents, using belt-conveyor-related accidents as an example. LAD is a pattern recognition and classification approach. It exploits the advancement in information technology and computational power in order to characterize the phenomenon under study. The application of LAD to machinery-related accident prevention is innovative. Ideally, accidents do not occur regularly, and as a result, companies have little data about them. The first objective of this paper is to demonstrate the feasibility of using LAD as an algorithm to characterize a small sample of machinery-related accidents with an adequate average classification accuracy. The second is to show that LAD can be used for prevention of machinery-related accidents. The results indicate that LAD is able to characterize different types of accidents with an average classification accuracy of 72–74%, which is satisfactory when compared with other studies dealing with large amounts of data where such a level of accuracy is considered adequate. The paper shows that the quantitative information provided by LAD about the patterns generated can be used as a logical way to prioritize risk factors. This prioritization helps safety practitioners make decisions regarding safety measures for machines. - Highlights: • LAD is presented as an innovative approach to prevent machinery-related accidents. • LAD is applied to a very small database of belt-conveyor-related accidents. • Despite scarce data, LAD generates patterns with adequate classification accuracy. • The patterns characterize different types of belt-conveyor-related accidents. • The patterns are useful to belt conveyor risk identification and risk estimation.
Alcohol-related hot-spot analysis and prediction : final report.

Science.gov (United States)

2017-05-01

This project developed methods to more accurately identify alcohol-related crash hot spots, ultimately allowing for more effective and efficient enforcement and safety campaigns. Advancements in accuracy came from improving the calculation of spatial...
The relation between the kink-type solution and the kink-bell-type solution of nonlinear evolution equations

International Nuclear Information System (INIS)

Liu Chunping

2003-01-01

Using a direct algebraic method, more new exact solutions of the Kolmogorov-Petrovskii-Piskunov equation are presented by formula form. Then a theorem concerning the relation between the kink-type solution and the kink-bell-type solution of nonlinear evolution equations is given. Finally, the applications of the theorem to several well-known equations in physics are also discussed
Robust PLS approach for KPI-related prediction and diagnosis against outliers and missing data

Science.gov (United States)

Yin, Shen; Wang, Guang; Yang, Xu

2014-07-01

In practical industrial applications, the key performance indicator (KPI)-related prediction and diagnosis are quite important for the product quality and economic benefits. To meet these requirements, many advanced prediction and monitoring approaches have been developed which can be classified into model-based or data-driven techniques. Among these approaches, partial least squares (PLS) is one of the most popular data-driven methods due to its simplicity and easy implementation in large-scale industrial process. As PLS is totally based on the measured process data, the characteristics of the process data are critical for the success of PLS. Outliers and missing values are two common characteristics of the measured data which can severely affect the effectiveness of PLS. To ensure the applicability of PLS in practical industrial applications, this paper introduces a robust version of PLS to deal with outliers and missing values, simultaneously. The effectiveness of the proposed method is finally demonstrated by the application results of the KPI-related prediction and diagnosis on an industrial benchmark of Tennessee Eastman process.
Potential of mediation for resolving environmental disputes related to energy facilities

Energy Technology Data Exchange (ETDEWEB)

None

1979-12-01

This study assesses the potential of mediation as a tool for resolving disputes related to the environmental regulation of new energy facilities and identifies possible roles the Federal government might play in promoting the use of mediation. These disputes result when parties challenge an energy project on the basis of its potential environmental impacts. The paper reviews the basic theory of mediation, evaluates specific applications of mediation to recent environmental disputes, discusses the views of environmental public-interest groups towards mediation, and identifies types of energy facility-related disputes where mediation could have a significant impact. Finally, potential avenues for the Federal government to encourage use of this tool are identified.
Final environmental statement related to the operation of Limerick Generating Station, Units 1 and 2, Docket Nos. 50-352 and 50-353, Philadelphia Electric Company

International Nuclear Information System (INIS)

1989-08-01

In April 1984 the staff of the Nuclear Regulatory Commission issued its Final Environmental Statement (NUREG-0974) related to the operation of Limerick Generating Station, Units 1 and 2, (Docket Nos. 50-352 and 50-353), located on the Schuylkill River, near Pottstown, in Limerick Township, Montgomery and Chester Counties, Pennsylvania. The NRC has prepared this supplement to NUREG-0974 to present its evaluation of the alternative of facility operation with the installation of further severe accident mitigation design features. The NRC staff has discovered no substantial changes in the proposed action as previously evaluated in the Final Environmental Statement that are relevant to environmental concerns nor significant new circumstances or information relevant to environmental concerns and bearing on the licensing of Limerick Generating Station, Units 1 and 2. 15 refs., 10 tabs
Emergency building temperature restrictions. Final evaluation

Energy Technology Data Exchange (ETDEWEB)

None

1980-11-01

On July 5, 1979, DOE promulgated final regulations of the Emergency Building Temperature Restrictions program, placing emergency restrictions on thermostat settings for space heating, space cooling, and hot water in commercial, industrial, and nonresidential public buildings. The final regulations restricted space heating to a maximum of 65/sup 0/F, hot water temperature to a maximum of 105/sup 0/F, and cooling temperature to a minimum of 78/sup 0/F. A comprehensive evaluation of the entire EBTF program for a nine-month period from July 16, 1979 is presented. In Chapter 1, an estimate of the population of buildings covered by EBTR is presented. In Chapter 2, EBTR compliance by building type and region is reported. Exemptions are also discussed. In Chapter 3, the simulations of building energy use are explained and the relative impact of various building characteristics and effectiveness of different control strategies are estimated. Finally, in Chapter 4, the methodology for scaling the individual building energy savings to the national level is described, and estimated national energy savings are presented.
Investigations on electroluminescent tapes and foils in relation to their applications in automotive

Science.gov (United States)

Plotog, Ioan

2015-02-01

The electroluminescent (EL) tapes or foils having barrier films for an additional level of protection against the toughest environments conditions, offer a large area of applications. The EL lights, due to their characteristics, began to be used not only in the entertainment industry, but also for automotive and aerospace applications. In the paper, the investigations regarding EL foils technical performances in relation to their applications as light sources in automotive ambient light were presented. The experiments were designed based on the results of EL foils electrical properties previous investigations done in laboratory conditions, taking into account the range of automotive ambient temperatures for sinusoidal alternative supply voltage. The measurements for different temperatures were done by keeping the EL foils into electronic controlled oven that ensures the dark enclosure offering conditions to use a lux-meter in order to measure and maintain under control light emission intensity. The experiments results define the EL foils characteristics as load in automotive ambient temperatures condition, assuring so the data for optimal design of a dedicated inverter.
An application of the discrete-time Toda lattice to the progressive algorithm by Lanczos and related problems

Science.gov (United States)

Nakamura, Yoshimasa; Sekido, Hiroto

2018-04-01

The finite or the semi-infinite discrete-time Toda lattice has many applications to various areas in applied mathematics. The purpose of this paper is to review how the Toda lattice appears in the Lanczos algorithm through the quotient-difference algorithm and its progressive form (pqd). Then a multistep progressive algorithm (MPA) for solving linear systems is presented. The extended Lanczos parameters can be given not by computing inner products of the extended Lanczos vectors but by using the pqd algorithm with highly relative accuracy in a lower cost. The asymptotic behavior of the pqd algorithm brings us some applications of MPA related to eigenvectors.
Fullerene-Related Nanocarbons and Their Applications

DEFF Research Database (Denmark)

Geng, Junfeng; Miyazawa, Kun'ichi; Hu, Zheng

2012-01-01

. From the vast amount of research that has been conducted over the last two decades, it is now apparent that these nanomaterials, notably, carbon nanotubes, carbon-based nanoparticles, graphene, fullerene and fullerene derivatives promise very distinct applications and will add great value to industries...
Analytical solution of perturbed relative motion: an application of satellite formations to geodesy

Science.gov (United States)

Wnuk, Edwin

In the upcoming years, several space missions will be operated using a number of spacecraft flying in formation. Clusters of spacecraft with a carefully designed orbits and optimal formation geometry enable a wide variety of applications ranging from remote sensing to astronomy, geodesy and basic physics. Many of the applications require precise relative navigation and autonomous orbit control of satellites moving in a formation. For many missions a centimeter level of orbit control accuracy is required. The GRACE mission, since its launch in 2002, has been improving the Earth's gravity field model to a very high level of accuracy. This mission is a formation flying one consisting of two satellites moving in coplanar orbits and provides range and range-rate measurements between the satellites in the along-track direction. Future geodetic missions probably will employ alternative architectures using additional satellites and/or performing out-of-plane motion, e.g cartwheel orbits. The paper presents an analytical model of a satellite formation motion that enables propagation of the relative spacecraft motion. The model is based on the analytical theory of satellite relative motion that was presented in the previous our papers (Wnuk and Golebiewska, 2005, 2006). This theory takes into account the influence of the following gravitational perturbation effects: 1) zonal and tesseral harmonic geopotential coefficients up to arbitrary degree and order, 2) Lunar gravity, 3) Sun gravity. Formulas for differential perturbations were derived with any restriction concerning a plane of satellite orbits. They can be applied in both: in plane and out of plane cases. Using this propagator we calculated relative orbits and future relative satellite positions for different types of formations: in plane, out of plane, cartwheel and others. We analyzed the influence of particular parts of perturbation effects and estimated the accuracy of predicted relative spacecrafts positions
The Michigan high-level radioactive waste program: Final technical progress report

International Nuclear Information System (INIS)

1987-01-01

This report comprises the state of Michigan's final technical report on the location of a proposed high-level radioactive waste disposal site. Included are a list of Michigan's efforts to review the DOE proposal and a detailed report on the application of geographic information systems analysis techniques to the review process
Final Report: Scintillator Materials for Medical Applications, December 1, 1997 - November 30, 1999

International Nuclear Information System (INIS)

Lempicki, A.; Brecher, C.; Wojtowicz, A.J.; Szupryczynski, P.

2000-01-01

From the very beginning of our program we regarded the understanding of the scintillation mechanism as our primary mission. If in addition this understanding could lead to the discovery of a new material, so much the better. When we began this work some nine years ago, the theoretical basis for the scintillation phenomenon was in disarray. The initial and final steps were reasonably well characterized, but there was no consensus on the crucial intermediate, the transfer of energy from the lattice to the emitting center. In the over 40 publications that resulted from this program, we demonstrated that despite the highly insulating nature of the hosts and the great magnitude of the band gap, the primary means of transport is through mobile charge carriers and their sequential capture by the emitting center. Although radical at the time, this picture is now generally accepted throughout the field. Subsequently, we also recognized the critical role that trapping centers localized at lattice defects can play in the process, not merely as passive sources of loss but as active participants in the kinetics. In this sense shallow traps can wreak more havoc than deep ones, impeding the rate by which carriers can reach the emitting centers and seriously slowing the resulting decay. And we established low-temperature thermoluminescence as a comprehensive tool for quantizing these effects. As for new and better materials, our work also had an impact. We were among the first to recognize the potential of LuAlO 3 (lutetium aluminum perovskite, or LuAP) as a detector for PET applications. Although this material has not supplanted LuSiO 5 (lutetium oxysilicate, or LSO) in terms of light output or absence of afterglow, LuAP still exhibits by far the highest figure of merit (light output divided by decay time) of any scintillator material currently known. Our work has also bought into stark view the dismaying realization of just how improbable it is that a material will ever be found
Development of ZIF-8 membranes: opportunities and challenges for commercial applications

KAUST Repository

Lai, Zhiping

2018-03-24

Metal organic framework (MOF) membranes have attracted significant attentions in recent years because of their potentials in gas and liquid separations and other applications such as catalysis and chemical sensors, etc. More than half of the MOF membrane publications up to date are related to ZIF-8 system, because of its easy synthesis, relatively high stability, and excellent gas separation performance, which allows many novel ideas to be easily implemented. Extensive studies have shown that ZIF-8 membranes hold great potentials in gas separations, but may face great challenges in liquid separations mainly because of their poor stability. This is also a common observation for other MOF membranes. As such, in this article we use ZIF-8 membrane as a prototype and focus on its development in gas separations for the discussions of the most concerned issues related to membrane commercialization including membrane synthesis, separation performance, stability, process reproducibility, and finally on the opportunities and challenges that MOF membranes may face in industrial applications.
Development of ZIF-8 membranes: opportunities and challenges for commercial applications

KAUST Repository

Lai, Zhiping

2018-01-01

Metal organic framework (MOF) membranes have attracted significant attentions in recent years because of their potentials in gas and liquid separations and other applications such as catalysis and chemical sensors, etc. More than half of the MOF membrane publications up to date are related to ZIF-8 system, because of its easy synthesis, relatively high stability, and excellent gas separation performance, which allows many novel ideas to be easily implemented. Extensive studies have shown that ZIF-8 membranes hold great potentials in gas separations, but may face great challenges in liquid separations mainly because of their poor stability. This is also a common observation for other MOF membranes. As such, in this article we use ZIF-8 membrane as a prototype and focus on its development in gas separations for the discussions of the most concerned issues related to membrane commercialization including membrane synthesis, separation performance, stability, process reproducibility, and finally on the opportunities and challenges that MOF membranes may face in industrial applications.
76 FR 18624 - Research, Technical Assistance and Training Programs: Notice of Final Circular

Science.gov (United States)

2011-04-04

... to FTA Circular 6100.1D, Research and Technical Assistance Training Program: Application Instructions... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Research, Technical Assistance and Training Programs: Notice of Final Circular AGENCY: Federal Transit Administration (FTA), DOT. ACTION...
The application of learning theory in horse training

DEFF Research Database (Denmark)

McLean, Andrew N.; Christensen, Janne Winther

2017-01-01

additional techniques (approach conditioning and stimulus blending). The salience of different types of cues, the interaction of operant and classical conditioning and the impact of stress are also discussed. This paper also exposes the inflexibility and occasional inadequacy of the terminology of learning...... on the correct application of learning theory, and safety and welfare benefits for people and horses would follow. Finally it is also proposed that the term ‘conflict theory’ be taken up in equitation science to facilitate diagnosis of training-related behaviour disorders and thus enable the emergence...
Final Scientific Report: DE-SC0002194

Energy Technology Data Exchange (ETDEWEB)

Seidler, Gerald [Univ. of Washington, Seattle, WA (United States)

2017-04-07

We provide the final scientific report for DE-SC0002194. During the term of this grant, 28 publications spanning a variety of topics were addressed under the rubric of advanced x-ray methods and their application to extreme conditions of time-resolution or x-ray intensities. Notable accomplishments include a new observation of XANES features associated with f-shell reconfiguration in lanthanides, size-dependent x-ray heating effects under XFEL illumination conditions, theoretical development of improved treatments of inelastic x-ray scattering for 'warm dense matter' conditions, and several new instrument develop efforts for atomic, molecular, and condensed phase studies in the lab and at major facility lightsources.
Variational description of continuum states in terms of integral relations

International Nuclear Information System (INIS)

Kievsky, A.; Viviani, M.; Barletta, Paolo; Romero-Redondo, C.; Garrido, E.

2010-01-01

Two integral relations derived from the Kohn variational principle (KVP) are used for describing scattering states. In usual applications the KVP requires the explicit form of the asymptotic behavior of the scattering wave function. This is not the case when the integral relations are applied since, due to their short-range nature, the only condition for the scattering wave function Ψ is that it be the solution of (H-E)Ψ=0 in the internal region. Several examples are analyzed for the computation of phase shifts from bound-state-type wave functions or, in the case of the scattering of charged particles, it is possible to obtain phase shifts using free asymptotic conditions. As a final example we discuss the use of the integral relations in the case of the hyperspherical adiabatic method.
LDRD final report : robust analysis of large-scale combinatorial applications.

Energy Technology Data Exchange (ETDEWEB)

Carr, Robert D.; Morrison, Todd (University of Colorado, Denver, CO); Hart, William Eugene; Benavides, Nicolas L. (Santa Clara University, Santa Clara, CA); Greenberg, Harvey J. (University of Colorado, Denver, CO); Watson, Jean-Paul; Phillips, Cynthia Ann

2007-09-01

Discrete models of large, complex systems like national infrastructures and complex logistics frameworks naturally incorporate many modeling uncertainties. Consequently, there is a clear need for optimization techniques that can robustly account for risks associated with modeling uncertainties. This report summarizes the progress of the Late-Start LDRD 'Robust Analysis of Largescale Combinatorial Applications'. This project developed new heuristics for solving robust optimization models, and developed new robust optimization models for describing uncertainty scenarios.

Application of project management methodology in design management of nuclear safety related structure

International Nuclear Information System (INIS)

Chen Mao

2004-01-01

This paper focuses on the application of project management methodology in the design management of Nuclear Safety Related Structure (NSRS), considering the design management features of its civil construction. Based on the experiences from the management of several projects, the project management triangle is proposed to be used in the management, to well treat the position of design interface in the project management. Some other management methods are also proposed
Narrative Finality

Directory of Open Access Journals (Sweden)

Armine Kotin Mortimer

1981-01-01

Full Text Available The cloturai device of narration as salvation represents the lack of finality in three novels. In De Beauvoir's Tous les hommes sont mortels an immortal character turns his story to account, but the novel makes a mockery of the historical sense by which men define themselves. In the closing pages of Butor's La Modification , the hero plans to write a book to save himself. Through the thrice-considered portrayal of the Paris-Rome relationship, the ending shows the reader how to bring about closure, but this collective critique written by readers will always be a future book. Simon's La Bataille de Pharsale , the most radical attempt to destroy finality, is an infinite text. No new text can be written. This extreme of perversion guarantees bliss (jouissance . If the ending of De Beauvoir's novel transfers the burden of non-final world onto a new victim, Butor's non-finality lies in the deferral to a future writing, while Simon's writer is stuck in a writing loop, in which writing has become its own end and hence can have no end. The deconstructive and tragic form of contemporary novels proclaims the loss of belief in a finality inherent in the written text, to the profit of writing itself.
Application of a Barrier Filter at a High Purity Synthetic Graphite Plant, CRADA 99-F035, Final Report; FINAL

International Nuclear Information System (INIS)

National Energy Technology Laboratory

2000-01-01

Superior Graphite Company and the US Department of Energy have entered into a Cooperative Research and Development Agreement (CRADA) to study the application of ceramic barrier filters at its Hopkinsville, Kentucky graphite plant. Superior Graphite Company is a worldwide leader in the application of advanced thermal processing technology to produce high purity graphite and carbons. The objective of the CRADA is to determine the technical and economic feasibility of incorporating the use of high-temperature filters to improve the performance of the offgas treatment system. A conceptual design was developed incorporating the ceramic filters into the offgas treatment system to be used for the development of a capital cost estimate and economic feasibility assessment of this technology for improving particulate removal. This CRADA is a joint effort of Superior Graphite Company, Parsons Infrastructure and Technology Group, and the National Energy Technology Laboratory (NETL) of the US Department of Energy (DOE)
Tax treatment of cafeteria plans. Internal Revenue Service (IRS), Treasury. Final regulations.

Science.gov (United States)

2000-03-23

This document contains final regulations relating to section 125 cafeteria plans. The final regulations clarify the circumstances under which a section 125 cafeteria plan election may be changed. The final regulations permit an employer to allow a section 125 cafeteria plan participant to revoke an existing election and make a new election during a period of coverage for accident or health coverage or group-term life insurance coverage.
Final Report

Energy Technology Data Exchange (ETDEWEB)

Gurney, Kevin R. [Arizona Univ., Mesa, AZ (United States)

2015-01-12

This document constitutes the final report under DOE grant DE-FG-08ER64649. The organization of this document is as follows: first, I will review the original scope of the proposed research. Second, I will present the current draft of a paper nearing submission to Nature Climate Change on the initial results of this funded effort. Finally, I will present the last phase of the research under this grant which has supported a Ph.D. student. To that end, I will present the graduate student’s proposed research, a portion of which is completed and reflected in the paper nearing submission. This final work phase will be completed in the next 12 months. This final workphase will likely result in 1-2 additional publications and we consider the results (as exemplified by the current paper) high quality. The continuing results will acknowledge the funding provided by DOE grant DE-FG-08ER64649.
Application of solar energy in houses in Tilburg, Netherlands. Final report

International Nuclear Information System (INIS)

Janssen, J.M.

1995-10-01

The options to use solar energy for housing corporations, private renters, active associations of owners and owner-occupants in Tilburg, Netherlands, are outlined. Special attention is paid to the application of solar water heaters, because of their possibility to contribute to a sustainable energy supply
Advanced Analog Signal Processing for Fuzing Final Report CRADA No. TC-1306-96

Energy Technology Data Exchange (ETDEWEB)

Fu, C. Y. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Spencer, D. [Raymond Engineering, Middletown, CT (United States)

2018-01-24

The purpose of this CRADA between LLNL and Kaman Aerospace/Raymond Engineering Operations (Raymond) was to demonstrate the feasibility of using Analog/Digital Neural Network (ANN) Technology for advanced signal processing, fuzing, and other applications. This cooperation sought to Ieverage the expertise and capabilities of both parties--Raymond to develop the signature recognition hardware system, using Raymond’s extensive experience in the area of system development plus Raymond’s knowledge of military applications, and LLNL to apply ANN and related technologies to an area of significant interest to the United States government. This CRADA effort was anticipated to be a three-year project consisting of three phases: Phase I, Proof-of-Principle Demonstration; Phase II, Proof-of-Design, involving the development of a form-factored integrated sensor and ANN technology processo~ and Phase III, Final Design and Release of the integrated sensor and ANN fabrication process: Under Phase I, to be conducted during calendar year 1996, Raymond was to deliver to LLNL an architecture (design) for an ANN chip. LLNL was to translate the design into a stepper mask and to produce and test a prototype chip from the Raymond design.
Applicator Training Manual for: Aquatic Weed Control.

Science.gov (United States)

Herron, James W.

The aquatic weeds discussed in this manual include algae, floating weeds, emersed weeds, and submerged weeds. Specific requirements for pesticide application are given for static water, limited flow, and moving water situations. Secondary effects of improper application rates and faulty application are described. Finally, techniques of limited…
"I Like to Plan Events": A Document Analysis of Essays Written by Applicants to a Public Relations Program

Science.gov (United States)

Taylor, Ronald E.

2016-01-01

A document analysis of 249 essays written during a 5-year period by applicants to a public relations program at a major state university in the southeast suggests that there are enduring reasons why students choose to major in public relations. Public relations is described as a major that allows for and encourages creative expression and that…
The special theory of relativity foundations, theory, verification, applications

CERN Document Server

Christodoulides, Costas

2016-01-01

This book offers a comprehensive, university-level introduction to Einstein’s Special Theory of Relativity. In addition to the purely theoretical aspect, emphasis is also given to its historical development as well as to the experiments that preceded the theory and those performed in order to test its validity. The main body of the book consists of chapters on Relativistic Kinematics and Dynamics and their applications, Optics and Electromagnetism. These could be covered in a one-semester course. A more advanced course might include the subjects examined in the other chapters of the book and its appendices. As a textbook, it has some unique characteristics: It provides detailed proofs of the theorems, offers abundant figures and discusses numerous examples. It also includes a number of problems for readers to solve, the complete solutions of which are given at the end of the book. It is primarily intended for use by university students of physics, mathematics and engineering. However, as the mathematics nee...
Multiplicative congruential generators, their lattice structure, its relation to lattice-sublattice transformations and applications in crystallography

Science.gov (United States)

Hornfeck, W.; Harbrecht, B.

2009-11-01

An analysis of certain types of multiplicative congruential generators - otherwise known for their application to the sequential generation of pseudo-random numbers - reveals their relation to lattice-sublattice transformations and the coordinate description of crystal structures.
Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Schuur, Edward [Northern Arizona Univ., Flagstaff, AZ (United States); Luo, Yiqi [Univ. of Oklahoma, Norman, OK (United States)

2016-12-01

This final grant report is a continuation of the final grant report submitted for DE-SC0006982 as the Principle Investigator (Schuur) relocated from the University of Florida to Northern Arizona University. This report summarizes the original project goals, as well as includes new project activities that were completed in the final period of the project.
The application of microfocal radiography to neuroanatomy and neuropathology research, and its relation to cerebral magnification angiography and brain scan interpretation. Chapter 3

International Nuclear Information System (INIS)

Saunders, R.L. de C.H.

1980-01-01

Microfocal radiography is used to study post mortem, the microcirculatory and neuronal organization of the normal and diseased brain, as well as to interpret the images obtained clinically by the new techniques of cerebral magnification angiography and X-ray brain scanning. An outline of the basic technique underlying CT scanning and magnification radiography of the living human brain is given to facilitate the understanding of why microfocal radiography is central to magnification radiography and complementary to CT scanning. Microangiography, one of the microfocal radiographic techniques, is discussed at length in relation to the microvasculature of the human cerebral cortex, the vasculature of the subcortical or medullary white matter, the microvascular patterns of the central grey matter and internal capsule, the vascular patterns of the visual cortex and hippocampus; the application of microangiography to the spinal cord and nerve roots is also discussed. Another microfocal radiographic technique described is cerebral historadiography, i.e. X-ray studies of brain histology, with particular reference to the human hippocampal formation. Finally, the correlation of microfocal X-ray and brain CT scan images is discussed. (U.K.)
REVIEW ARTICLE: Spectrophotometric applications of digital signal processing

Science.gov (United States)

Morawski, Roman Z.

2006-09-01

Spectrophotometry is more and more often the method of choice not only in analysis of (bio)chemical substances, but also in the identification of physical properties of various objects and their classification. The applications of spectrophotometry include such diversified tasks as monitoring of optical telecommunications links, assessment of eating quality of food, forensic classification of papers, biometric identification of individuals, detection of insect infestation of seeds and classification of textiles. In all those applications, large numbers of data, generated by spectrophotometers, are processed by various digital means in order to extract measurement information. The main objective of this paper is to review the state-of-the-art methodology for digital signal processing (DSP) when applied to data provided by spectrophotometric transducers and spectrophotometers. First, a general methodology of DSP applications in spectrophotometry, based on DSP-oriented models of spectrophotometric data, is outlined. Then, the most important classes of DSP methods for processing spectrophotometric data—the methods for DSP-aided calibration of spectrophotometric instrumentation, the methods for the estimation of spectra on the basis of spectrophotometric data, the methods for the estimation of spectrum-related measurands on the basis of spectrophotometric data—are presented. Finally, the methods for preprocessing and postprocessing of spectrophotometric data are overviewed. Throughout the review, the applications of DSP are illustrated with numerous examples related to broadly understood spectrophotometry.
Shutdown and degradation: Space computers for nuclear application, verification of radiation hardness. Final report

International Nuclear Information System (INIS)

Eichhorn, E.; Gerber, V.; Schreyer, P.

1995-01-01

(1) Employment of those radiation hard electronics which are already known in military and space applications. (2) The experience in space-flight shall be used to investigate nuclear technology areas, for example, by using space electronics to prove the range of applications in nuclear radiating environments. (3) Reproduction of a computer developed for telecommunication satellites; proof of radiation hardness by radiation tests. (4) At 328 Krad (Si) first failure of radiation tolerant devices with 100 Krad (Si) hardness guaranteed. (5) Using radiation hard devices of the same type you can expect applications at doses of greater than 1 Mrad (Si). Electronic systems applicable for radiation categories D, C and lower part of B for manipulators, vehicles, underwater robotics. (orig.) [de
Computer simulation of kinetic properties of plasmas. Final report

International Nuclear Information System (INIS)

Denavit, J.

1982-08-01

The research was directed toward the development and testing of new numerical methods for particle and hybrid simulation of plasmas, and their application to physical problems of current significance to Magnetic Fusion Energy. This project will terminate on August 31, 1982 and this Final Report describes: (1) the research accomplished since the last renewal on October 1, 1981; and (2) a perspective of the work done since the beginning of the project in February 1972
Comparative analysis of safety related site characteristics

International Nuclear Information System (INIS)

Andersson, Johan

2010-12-01

This document presents a comparative analysis of site characteristics related to long-term safety for the two candidate sites for a final repository for spent nuclear fuel in Forsmark (municipality of Oesthammar) and in Laxemar (municipality of Oskarshamn) from the point of view of site selection. The analyses are based on the updated site descriptions of Forsmark /SKB 2008a/ and Laxemar /SKB 2009a/, together with associated updated repository layouts and designs /SKB 2008b and SKB 2009b/. The basis for the comparison is thus two equally and thoroughly assessed sites. However, the analyses presented here are focussed on differences between the sites rather than evaluating them in absolute terms. The document serves as a basis for the site selection, from the perspective of long-term safety, in SKB's application for a final repository. A full evaluation of safety is made for a repository at the selected site in the safety assessment SR-Site /SKB 2011/, referred to as SR-Site main report in the following
Comparative analysis of safety related site characteristics

Energy Technology Data Exchange (ETDEWEB)

Andersson, Johan (ed.)

2010-12-15

This document presents a comparative analysis of site characteristics related to long-term safety for the two candidate sites for a final repository for spent nuclear fuel in Forsmark (municipality of Oesthammar) and in Laxemar (municipality of Oskarshamn) from the point of view of site selection. The analyses are based on the updated site descriptions of Forsmark /SKB 2008a/ and Laxemar /SKB 2009a/, together with associated updated repository layouts and designs /SKB 2008b and SKB 2009b/. The basis for the comparison is thus two equally and thoroughly assessed sites. However, the analyses presented here are focussed on differences between the sites rather than evaluating them in absolute terms. The document serves as a basis for the site selection, from the perspective of long-term safety, in SKB's application for a final repository. A full evaluation of safety is made for a repository at the selected site in the safety assessment SR-Site /SKB 2011/, referred to as SR-Site main report in the following
Evaluation of the geologic relations and seismotectonic stability of the Yucca Mountain area, Nevada Nuclear Waste Site Investigation (NNWSI); Final report, January 1, 1987--June 30, 1988: Volume 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-10-01

This report provides a summary of progress for the project ``Evaluation of the Geologic Relations and Seismotectonic Stability of the Yucca Mountain Area, Nevada Nuclear Waste Site Investigation (NNWSI)`` for the eighteen month period of January 1, 1987 to June 10, 1988. This final report was preceded by the final report for the initial six month period, July 1, 1986 to December 31, 1986 (submitted on January 25, 1987, and revised in June 1987.) Quaternary Tectonics, Geochemical, Mineral Deposits, Vulcanic Geology, Seismology, Tectonics, Neotectonics, Remote Sensing, Geotechnical Assessments, Geotechnical Rock Mass Assessments, Basinal Studies, and Strong Ground Motion.
Chemical modification of graphene aerogels for electrochemical capacitor applications.

Science.gov (United States)

Hong, Jin-Yong; Wie, Jeong Jae; Xu, Yu; Park, Ho Seok

2015-12-14

Graphene aerogel is a relatively new type of aerogel that is ideal for energy storage applications because of its large surface area, high electrical conductivity and good chemical stability. Also, three dimensional interconnected macropores offer many advantages such as low density, fast ion and mass transfer, and easy access to storage sites. Such features allow graphene aerogels to be intensively applied for electrochemical capacitor applications. Despite the growing interest in graphene aerogel-based electrochemical capacitors, however, the graphene aerogels still suffer from their low capacitive performances and high fragility. Both relatively low capacitance and brittleness of physically crosslinked graphene aerogels remain a critical challenge. Until now, a number of alternative attempts have been devoted to overcome these shortcomings. In this perspective, we summarize the recent research progress towards the development of advanced graphene aerogel-based electrochemical capacitors according to the different approaches (e.g. porosity, composition and structure controls). Then, the recently proposed chemical strategies to improve the capacitive performances and mechanical durability of graphene aerogels for practical applications are highlighted. Finally, the current challenges and perspectives in this emerging material are also discussed.

Final Energy Consumption Trends and Drivers in Czech Republic and Latvia

Directory of Open Access Journals (Sweden)

Zhiqian Yu

2017-08-01

Full Text Available This paper analyses the trends of final energy consumption in Latvia and Czech Republic. Analysis of final energy consumption during 2000-2013 period indicated the main driving forces of final energy consumption during and after world financial crisis of 2008. The paper aimed to evaluate the impact of economic activity and other factors on final energy consumption. The decomposition of the final energy consumption is assessed by analyzing effect of different drivers by the main end-users sector (industry, transport, households, agriculture, services, activity, demography, lifestyles, structural effects, energy savings etc. The results show that the reduction in final energy consumption in most EU members states before and after year 2008 can be related to the decline in energy intensities within endusers sectors. At the same time, the increase in final energy intensity after the year 2008 is attributed to expansion of energy demand sectors. Comparison of final energy consumption trends and drivers in Latvia and Czech Republic indicated that Czech Republic implemented more policies and measures in industry and tertiary sector and this provided for final energy consumption decreased and huge energy savings in these sectors.
8 CFR 1003.47 - Identity, law enforcement, or security investigations or examinations relating to applications...

Science.gov (United States)

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Identity, law enforcement, or security investigations or examinations relating to applications for immigration relief, protection, or restriction on removal. 1003.47 Section 1003.47 Aliens and Nationality EXECUTIVE OFFICE FOR IMMIGRATION REVIEW, DEPARTMENT OF JUSTICE GENERAL PROVISIONS...
Final disposal of the rad waste materials - question of the nuclear energy implementation and application perspectives

International Nuclear Information System (INIS)

Plecas, I.

1995-01-01

Two main problems that are denying and slowing down the development of nuclear energy are safe work of the nuclear power facilities (NEF) and disposal of the radioactive waste materials, produced from the NEF and infrastructure facilities of the nuclear fuel cycle (NFC). Although nowadays worldwide knowledge, based on the 45 year of experiences in handling the radioactive waste materials, do not treat the problems of final disposal of the rad waste materials as a task of the primary importance in NFC, this subject still engage experts from this field of investigations, especially in the countries that developed all aspects of the nuclear fuel cycle. Techniques for final disposal of low and intermediate level rad waste materials, are well known and are in state of implementation. The importance of the fundamental safety principles, implemented in the IAEA documents, concerning handling, treatment and final disposal of the rad waste materials, is presented. Future usage of nuclear energy, taking into account all the facts that are dealing with problems of the rad waste materials produced in the NFC, can be a reality. (author.)
Development of Advanced Polymeric Reflector for CSP Applications - Final Report

Energy Technology Data Exchange (ETDEWEB)

Treglio, Richard, T; Boyle, Keith, A; Henderson, Hildie

2013-03-28

This project attempted to deposit extremely thick and dense protective barrier onto a mirror film stack with a PET substrate. The target thickness was very high for thin film products; particularly since large areas and long production lengths of film are needed to make the final product economic. The technical investigations in this project centered on maintaining a quality barrier (i.e. dense film) while evaporating alumina with a high deposition rate onto a low cost PET substrate. The project found that the proposed configuration, particularly direct ion bombardment, provides too narrow a solution space to effectively and economically produce the ASRM attempted. The initial project goals were met when depositing on a limited width and at a modest rate. However, expanding to wide deposition at aggressive deposition rates did not produce consistent film quality. Economic viability drives the process to maximize deposition rate. The current system configuration has a limiting upper rate threshold that does not appear economically viable. For future work, alternate approaches seem needed to address the challenges encountered in the scale-up phase of this project.
Lignin from Micro- to Nanosize: Applications

Directory of Open Access Journals (Sweden)

Stefan Beisl

2017-11-01

Full Text Available Micro- and nanosize lignin has recently gained interest due to improved properties compared to standard lignin available today. As the second most abundant biopolymer after cellulose, lignin is readily available but used for rather low-value applications. This review focuses on the application of micro- and nanostructured lignin in final products or processes that all show potential for high added value. The fields of application are ranging from improvement of mechanical properties of polymer nanocomposites, bactericidal and antioxidant properties and impregnations to hollow lignin drug carriers for hydrophobic and hydrophilic substances. Also, a carbonization of lignin nanostructures can lead to high-value applications such as use in supercapacitors for energy storage. The properties of the final product depend on the surface properties of the nanomaterial and, therefore, on factors like the lignin source, extraction method, and production/precipitation methods, as discussed in this review.
Low-cost addition-subtraction sequences for the final exponentiation computation in pairings

DEFF Research Database (Denmark)

Guzmán-Trampe, Juan E; Cruz-Cortéz, Nareli; Dominguez Perez, Luis

2014-01-01

In this paper, we address the problem of finding low cost addition–subtraction sequences for situations where a doubling step is significantly cheaper than a non-doubling one. One application of this setting appears in the computation of the final exponentiation step of the reduced Tate pairing d...
System-Cost-Optimized Smart EVSE for Residential Application: Final Technical Report including Manufacturing Plan

Energy Technology Data Exchange (ETDEWEB)

Zhu, Charles [Delta Products, Triangle Park, NC (United States)

2015-05-15

In the 2nd quarter of 2012, a program was formally initiated at Delta Products to develop smart-grid-enabled Electric Vehicle Supply Equipment (EVSE) product for residential use. The project was funded in part by the U.S. Department of Energy (DOE), under award DE-OE0000590. Delta products was the prime contractor to DOE during the three year duration of the project. In addition to Delta Products, several additional supplier-partners were engaged in this research and development (R&D) program, including Detroit Edison DTE, Mercedes Benz Research and Development North America, and kVA. This report summarizes the program and describes the key research outcomes of the program. A technical history of the project activities is provided, which describes the key steps taken in the research and the findings made at successive stages in the multi-stage work. The evolution of an EVSE prototype system is described in detail, culminating in prototypes shipped to Department of Energy Laboratories for final qualification. After the program history is reviewed, the key attributes of the resulting EVSE are described in terms of functionality, performance, and cost. The results clearly demonstrate the ability of this EVSE to meet or exceed DOE's targets for this program, including: construction of a working product-intent prototype of a smart-grid-enabled EVSE, with suitable connectivity to grid management and home-energy management systems, revenue-grade metering, and related technical functions; and cost reduction of 50% or more compared to typical market priced EVSEs at the time of DOE's funding opportunity announcement (FOA), which was released in mid 2011. In addition to meeting all the program goals, the program was completed within the original budget and timeline established at the time of the award. The summary program budget and timeline, comparing plan versus actual values, is provided for reference, along with several supporting explanatory notes. Technical
A plane-wave final-state theory of ATI

International Nuclear Information System (INIS)

Parker, J.S.; Clark, C.W.

1993-01-01

A Fermi Golden Rule calculation of ionization cross-sections provides us with the simplest example of a plane-wave final-state theory. In this method the final (unbound) state is modeled as a plane wave, an approximation that generally gives best results in the high energy limit in which the affect of the atomic potential on the final state can be neglected. A cross-section is then calculated from the matrix element connecting the bound initial state with the final state. The idea of generalizing this method to model transitions among unbound states is credited to L.V. Keldysh, and a number of related formalisms have been proposed that are consistent with the general features of experimental data. Here we describe a plane-wave final-state model of ATI that is in the spirit of these theories, but differs significantly in its implementation and predictions. We will present a comparison of the predictions of the plane-wave model with those of a full numerical integration of the time-dependent Schrodinger equation for atomic hydrogen in a radiation field. The theory and the numerical integration give good qualitative agreement in their predictions of photoelectron spectra over about 14 orders of magnitude
Easier surveillance of climate-related health vulnerabilities through a Web-based spatial OLAP application

Directory of Open Access Journals (Sweden)

Gosselin Pierre

2009-04-01

Full Text Available Abstract Background Climate change has a significant impact on population health. Population vulnerabilities depend on several determinants of different types, including biological, psychological, environmental, social and economic ones. Surveillance of climate-related health vulnerabilities must take into account these different factors, their interdependence, as well as their inherent spatial and temporal aspects on several scales, for informed analyses. Currently used technology includes commercial off-the-shelf Geographic Information Systems (GIS and Database Management Systems with spatial extensions. It has been widely recognized that such OLTP (On-Line Transaction Processing systems were not designed to support complex, multi-temporal and multi-scale analysis as required above. On-Line Analytical Processing (OLAP is central to the field known as BI (Business Intelligence, a key field for such decision-support systems. In the last few years, we have seen a few projects that combine OLAP and GIS to improve spatio-temporal analysis and geographic knowledge discovery. This has given rise to SOLAP (Spatial OLAP and a new research area. This paper presents how SOLAP and climate-related health vulnerability data were investigated and combined to facilitate surveillance. Results Based on recent spatial decision-support technologies, this paper presents a spatio-temporal web-based application that goes beyond GIS applications with regard to speed, ease of use, and interactive analysis capabilities. It supports the multi-scale exploration and analysis of integrated socio-economic, health and environmental geospatial data over several periods. This project was meant to validate the potential of recent technologies to contribute to a better understanding of the interactions between public health and climate change, and to facilitate future decision-making by public health agencies and municipalities in Canada and elsewhere. The project also aimed at
Easier surveillance of climate-related health vulnerabilities through a Web-based spatial OLAP application.

Science.gov (United States)

Bernier, Eveline; Gosselin, Pierre; Badard, Thierry; Bédard, Yvan

2009-04-03

Climate change has a significant impact on population health. Population vulnerabilities depend on several determinants of different types, including biological, psychological, environmental, social and economic ones. Surveillance of climate-related health vulnerabilities must take into account these different factors, their interdependence, as well as their inherent spatial and temporal aspects on several scales, for informed analyses. Currently used technology includes commercial off-the-shelf Geographic Information Systems (GIS) and Database Management Systems with spatial extensions. It has been widely recognized that such OLTP (On-Line Transaction Processing) systems were not designed to support complex, multi-temporal and multi-scale analysis as required above. On-Line Analytical Processing (OLAP) is central to the field known as BI (Business Intelligence), a key field for such decision-support systems. In the last few years, we have seen a few projects that combine OLAP and GIS to improve spatio-temporal analysis and geographic knowledge discovery. This has given rise to SOLAP (Spatial OLAP) and a new research area. This paper presents how SOLAP and climate-related health vulnerability data were investigated and combined to facilitate surveillance. Based on recent spatial decision-support technologies, this paper presents a spatio-temporal web-based application that goes beyond GIS applications with regard to speed, ease of use, and interactive analysis capabilities. It supports the multi-scale exploration and analysis of integrated socio-economic, health and environmental geospatial data over several periods. This project was meant to validate the potential of recent technologies to contribute to a better understanding of the interactions between public health and climate change, and to facilitate future decision-making by public health agencies and municipalities in Canada and elsewhere. The project also aimed at integrating an initial collection of geo
75 FR 32846 - Final Rule Relating to Time and Order of Issuance of Domestic Relations Orders

Science.gov (United States)

2010-06-10

... is issued after the parties divorce. Example 3 illustrates that an order would not fail to be a QDRO... Alternate payee, Divorce, Domestic relations orders, Employee benefit plans, Marital property, Spouse, Plan administrator, Pensions, Qualified domestic relations orders. 0 For the reasons set forth in the preamble, the...
Advanced Fuel Cycle Initiative University Fellowship Program. Final Progress Report

International Nuclear Information System (INIS)

Dixon, Cathy

2012-01-01

2004-2011 Final Report for AFCI University Fellowship Program. The goal of this effort was to be supportive of university students and university programs - particularly those students and programs that will help to strengthen the development of nuclear-related fields. The program also supported the stability of the nuclear infrastructure and developed research partnerships that are helping to enlarge the national nuclear science technology base. In this fellowship program, the U.S. Department of Energy sought master's degree students in nuclear, mechanical, or chemical engineering, engineering/applied physics, physics, chemistry, radiochemistry, or fields of science and engineering applicable to the AFCI/Gen IV/GNEP missions in order to meet future U.S. nuclear program needs. The fellowship program identified candidates and selected full time students of high-caliber who were taking nuclear courses as part of their degree programs. The DOE Academic Program Managers encouraged fellows to pursue summer internships at national laboratories and supported the students with appropriate information so that both the fellows and the nation's nuclear energy objectives were successful.
40 CFR 61.134 - Standard: Naphthalene processing, final coolers, and final-cooler cooling towers.

Science.gov (United States)

2010-07-01

... coolers, and final-cooler cooling towers. 61.134 Section 61.134 Protection of Environment ENVIRONMENTAL... Standard: Naphthalene processing, final coolers, and final-cooler cooling towers. (a) No (“zero”) emissions are allowed from naphthalene processing, final coolers and final-cooler cooling towers at coke by...
Corrosion-related failures in power plant condensers. Final report

International Nuclear Information System (INIS)

Beavers, J.A.; Agrawal, A.K.; Berry, W.E.

1980-08-01

A survey of the literature has been conducted for the Electric Power Research Institute on corrosion failures in surface condensers. The survey was directed toward condenser failures in pressurized water reactor (PWR) power plants but includes pertinent literature related to fossil and to other nuclear power plants. It includes literature on reported service failures and on experimental studies that impact on these failures
The Text of the Agreement between the Agency and Argentina Relating to the Application of Safeguards

International Nuclear Information System (INIS)

1974-01-01

The text of the Agreement between the Agency and Argentina relating to the application of safeguards is reproduced in this document for the information of all Members. The Agreement entered into force on 23 October 1973 pursuant to Section 10.
The Text of the Agreement between the Agency and Argentina Relating to the Application of Safeguards

Energy Technology Data Exchange (ETDEWEB)

NONE

1974-02-18

The text of the Agreement between the Agency and Argentina relating to the application of safeguards is reproduced in this document for the information of all Members. The Agreement entered into force on 23 October 1973 pursuant to Section 10.
Final repository for spent nuclear fuel - the role of the municipality

International Nuclear Information System (INIS)

Berggren, Marie; Lindfors, Virpi; Andersson Oehrn, Barbro; Alm, Bertil; Soederblom, Anna-Lena; Berggren, Marie; Lindfors, Virpi

2014-01-01

In Sweden there is a long tradition of local self-government which is enshrined within the Swedish constitution, and the municipalities are responsible for matters relating to its inhabitants and their immediate environment. The municipality of Oesthammar has been engaged in the project of final repository for spent nuclear fuel since 1995 and by that time a consultative committee was established with representatives from all the political parties within the municipality and neighbouring municipalities. Future potentials as well as threats must be considered when making decisions on the most favourable site and the method used for the disposal of nuclear waste, and the application from SKB, as well as the review by the authorities, must stand up to a number of public demands. The work has included several stages of decisions for the municipality, due to the site selection process for SKB. The dialogue between the municipality and SKB as well as between the municipality and the authorities has been of great importance for getting the stepwise decision making process that has become practice in this question. The municipality has intensively followed the process concerning establishment of a final repository through consultation meetings, by being observer on meetings between SKB and Swedish Radiation Safety Authority (SSM), seminars, statements, etc. The openness and transparency throughout the process has been essential between all actors. However, if the municipalities have a right of absolute veto, the government still can say yes even if the municipality has said no
Navy radon assessment and mitigation program: Final report

International Nuclear Information System (INIS)

1994-10-01

This final report encompasses the events from the beginning of the Navy Radon Assessment and Mitigation Program to the closure of the program on October 31, 1994. Included in the report are discussions of the phases of the program including screening, assessment, mitigation, and post-mitigation. The primary discussion involves screening and assessment. The report addresses recommendations made to the Naval Facilities Engineering Command by the Hazardous Waste Remedial Actions Program of Martin Marietta Energy Systems, Inc., and the final decisions that were made. Special emphasis is placed on quality assurance/quality control (QA/QC), since QA/QC was given top priority during the implementation of this program. Included in the discussion on QA/QC are ana overview of the measurement process, positive and negative controls, replicated measurements, and application of chamber exposures to data calibration. The report concludes with a discussion of testing considerations for naval facilities and radon mitigation considerations for the Department of the Navy
Teeth and bones: applications of surface science to dental materials and related biomaterials

Science.gov (United States)

Jones, F. H.

2001-05-01

Recent years have seen a considerable upsurge in publications concerning the surface structure and chemistry of materials with biological or biomedical applications. Within the body, gas-solid interactions become relatively less significant and solid-liquid or solid-solid interfaces dominate, providing new challenges for the surface scientist. The current paper aims to provide a timely review of the use of surface analysis and modification techniques within the biomaterials field. A broad overview of applications in a number of related areas is given with particular attention focusing on those materials commonly encountered in dentistry and oral or maxillofacial implantology. Several specific issues of current interest are discussed. The interaction between synthetic and natural solids, both in the oral environment and elsewhere in the body is important in terms of adhesion, related stresses and strains and ultimately the longevity of a dental restoration, biomedical implant, or indeed the surrounding tissue. Exposure to body fluids, of course, can also affect stability, leading to the degradation or corrosion of materials within the body. Whilst this could potentially be harmful, e.g., if cytotoxic elements are released, it may alternatively provide a route to the preferential release of beneficial substances. Furthermore, in some cases, the controlled disintegration of a biomaterial is desirable, allowing the removal of an implant, e.g., without the need for further surgery. The presence of cells in the immediate bioenvironment additionally complicates the situation. A considerable amount of current research activity is targeted at the development of coatings or surface treatments to encourage tissue growth. If this is to be achieved by stimulating enhanced cell productivity, determination of the relationship between cell function and surface composition is essential.
Final Report of the Final Meeting of Project Coordinators

International Nuclear Information System (INIS)

Cordero Calderon, Carlos F.

1996-06-01

The Costa Rican Electricity Institute has always been worried of the verification of the good state of the works and thus to guarantee their operation. For that reason, it has established different sorts of auscultation of the Arenal's Dam. Some investigations have been done to find new methods to improve and to eliminate risks in different works or projects. The Arenal's Dam is one of the greatest engineering works in Costa Rica, it has the Arenal, Corobici and Sandillal Hydroelectric Plants. Furthermore, the irrigation system in the Tempisque River Valley, in the Guanacaste province. One special characteristic of the Site of the Dam, is the near location of the Arenal Volcano, in full activity and located at 6 Km. from the dam. This report has two goals, one is the traditional permanent measurements report for the project, and the other, is to present it as a final work of the Project Arcal XVIII, to the International Atomic Energy Agency. This report analyses the geo-hydraulic, structural and topographic auscultation, as well as the activities accomplished during the ARCAL XVIII /8/018, Application of Tracer Techniques for Leakage in Dams and Damming Project, based on information gathered through the geo-chemical auscultation, until June 1996. (author).30 ills., 80 charts, 35 tabs

The application of nuclear and nuclear-related techniques for environmental pollution studies in Vietnam

International Nuclear Information System (INIS)

Nguyen Mong Sinh

1992-01-01

The applicability of neutron activation analysis, X-ray fluorescence and other related techniques to environmental samples from Viet Nam has been investigated. Results show that multielemental analysis of environmental samples and the determination of heavy metal pollution in the environment is best performed by a combination of techniques. Preliminary results of studying the environmental pollution associated with solid wastes are reported. 4 refs, 5 figs, 17 tabs
The application of isotope techniques to the assessment of aquifer systems in major urban areas. Final report of a co-ordinated research project 1997-2000

International Nuclear Information System (INIS)

2002-07-01

Aquifer systems in most urban areas have been impacted to varying degrees by sustained exploitation and the future availability of water is being threatened by depleting aquifers or water quality degradation. Improved methods for the assessment and management of groundwater resources in major urban areas, therefore, are issues of high priority for most countries. The IAEA has, over last four decades, co-ordinated the development, adaptation, and testing of isotope techniques for hydrological applications. A number of techniques and methodologies that are now established for water resources management are potentially useful for characterizing the short and long term changes resulting from the extensive use of aquifers in and near urban areas. The application of isotope techniques in urban hydrology was the focus of this co-ordinated research project (CRP). This report provides the final results of the CRP, and is expected to be of interest to scientists, managers and planners involved in water resources assessment in urban areas. This publication contains seven individual reports, each of them was indexed separately
EPA Supersites Program-related emissions-based particulate matter modeling: initial applications and advances.

Science.gov (United States)

Russell, Armistead G

2008-02-01

One objective of the U.S. Environmental Protection Agency's (EPA's) Supersite Program was to provide data that could be used to more thoroughly evaluate and improve air quality models, and then have those models used to address both scientific and policy-related issues dealing with air quality management. In this direction, modeling studies have used Supersites-related data and are reviewed here. Fine temporal resolution data have been used both to test model components (e.g., the inorganic thermodynamic routines) and air quality modeling systems (in particular, Community Multiscale Air Quality [CMAQ] and Comprehensive Air Quality Model with extensions [CAMx] applications). Such evaluations suggest that the inorganic thermodynamic approaches being used are accurate, as well as the description of sulfate production, although there are significant uncertainties in production of nitric acid, biogenic and ammonia emissions, secondary organic aerosol formation, and the ability to follow the formation and evolution of ultrafine particles. Model applications have investigated how PM levels will respond to various emissions controls, suggesting that nitrate will replace some of the reductions in sulfate particulate matter (PM), although the replacement is small in the summer. Although not part of the Supersite program, modeling being conducted by EPA, regional planning organizations, and states for policy purposes has benefited from the detailed data collected, and the PM models have advanced by their more widespread use.
Applications of sub-optimality in dynamic programming to location and construction of nuclear fuel processing plant

International Nuclear Information System (INIS)

Thiriet, L.; Deledicq, A.

1968-09-01

First, the point of applying Dynamic Programming to optimization and Operational Research problems in chemical industries are recalled, as well as the conditions in which a dynamic program is illustrated by a sequential graph. A new algorithm for the determination of sub-optimal politics in a sequential graph is then developed. Finally, the applications of sub-optimality concept is shown when taking into account the indirect effects related to possible strategies, or in the case of stochastic choices and of problems of the siting of plants... application examples are given. (authors) [fr
Grid-search Moment Tensor Estimation: Implementation and CTBT-related Application

Science.gov (United States)

Stachnik, J. C.; Baker, B. I.; Rozhkov, M.; Friberg, P. A.; Leifer, J. M.

2017-12-01

This abstract presents a review work related to moment tensor estimation for Expert Technical Analysis at the Comprehensive Test Ban Treaty Organization. In this context of event characterization, estimation of key source parameters provide important insights into the nature of failure in the earth. For example, if the recovered source parameters are indicative of a shallow source with large isotropic component then one conclusion is that it is a human-triggered explosive event. However, an important follow-up question in this application is - does an alternative hypothesis like a deeper source with a large double couple component explain the data approximately as well as the best solution? Here we address the issue of both finding a most likely source and assessing its uncertainty. Using the uniform moment tensor discretization of Tape and Tape (2015) we exhaustively interrogate and tabulate the source eigenvalue distribution (i.e., the source characterization), tensor orientation, magnitude, and source depth. The benefit of the grid-search is that we can quantitatively assess the extent to which model parameters are resolved. This provides a valuable opportunity during the assessment phase to focus interpretation on source parameters that are well-resolved. Another benefit of the grid-search is that it proves to be a flexible framework where different pieces of information can be easily incorporated. To this end, this work is particularly interested in fitting teleseismic body waves and regional surface waves as well as incorporating teleseismic first motions when available. Being that the moment tensor search methodology is well-established we primarily focus on the implementation and application. We present a highly scalable strategy for systematically inspecting the entire model parameter space. We then focus on application to regional and teleseismic data recorded during a handful of natural and anthropogenic events, report on the grid-search optimum, and
Mission related to regulation and development of the photovoltaic sector in France. Final report; Mission relative a la regulation et au developpement de la filiere photovoltaique en France. Rapport final

Energy Technology Data Exchange (ETDEWEB)

Charpin, J.M; Sine, A.; Helleisen, Ph.; Tlili, C. [Inspection Generale des Finances - IGF, 75 - Paris (France); Trink, C.; Stoffaes, Ch. [Conseil General de l' Industrie de l' Energie et des Technologies - CGIET, 75 - Paris (France)

2010-07-01

This report first gives an overview of the development of the photovoltaic stock in France (high potential with a middle term development constrained by high costs, consequences of a very strong increase of demands at the end of 2009, perspective of development at a rather high rate). Then, it outlines and discusses the financial consequences of such a high rate development, and the inadequacy between industrial objectives and development rate. It presents a development plan for this sector, stresses the need to implement new purchase obligation measures before the summer 2010, and to define a global action plan to be implemented at the beginning of 2011 for the development of photovoltaic electricity. Elements of international comparison are finally proposed
Low-level waste disposal site performance assessment with the RQ/PQ methodology. Final report

International Nuclear Information System (INIS)

Rogers, V.C.; Grant, M.W.; Sutherland, A.A.

1982-12-01

A methodology called RQ/PQ (retention quotient/performance quotient) has been developed for relating the potential hazard of radioactive waste to the natural and man-made barriers provided by a disposal facility. The methodology utilizes a systems approach to quantify the safety of low-level waste disposed in a near-surface facility. The main advantages of the RQ/PQ methodology are its simplicity of analysis and clarity of presentation while still allowing a comprehensive set of nuclides and pathways to be treated. Site performance and facility designs for low-level waste disposal can be easily investigated with relatively few parameters needed to define the problem. Application of the methodology has revealed that the key factor affecting the safety of low-level waste disposal in near surface facilities is the potential for intrusion events. Food, inhalation and well water pathways dominate in the analysis of such events. While the food and inhalation pathways are not strongly site-dependent, the well water pathway is. Finally, burial at depths of 5 m or more was shown to reduce the impacts from intrusion events
The principles of ultrasound and its application in freezing related processes of food materials: A review.

Science.gov (United States)

Cheng, Xinfeng; Zhang, Min; Xu, Baoguo; Adhikari, Benu; Sun, Jincai

2015-11-01

Ultrasonic processing is a novel and promising technology in food industry. The propagation of ultrasound in a medium generates various physical and chemical effects and these effects have been harnessed to improve the efficiency of various food processing operations. Ultrasound has also been used in food quality control as diagnostic technology. This article provides an overview of recent developments related to the application of ultrasound in low temperature and closely related processes such as freezing, thawing, freeze concentration and freeze drying. The applications of high intensity ultrasound to improve the efficiency of freezing process, to control the size and size distribution of ice crystals and to improve the quality of frozen foods have been discussed in considerable detail. The use of low intensity ultrasound in monitoring the ice content and to monitor the progress of freezing process has also been highlighted. Copyright © 2015 Elsevier B.V. All rights reserved.
Probabilistic Safety Goals for Nuclear Power Plants; Phases 2-4 / Final Report

International Nuclear Information System (INIS)

Bengtsson, Lisa; Knochenhauer, Michael; Holmberg, Jan-Erik; Rossi, Jukka

2011-05-01

identified, such as the problem of consistency in judgement, comparability of safety goals used in different industries, the relationship between criteria on different levels, and relations between criteria for level 2 and 3 PSA. In parallel, additional context information has been provided. This was achieved by extending the international overview by contributing to and benefiting from a survey on PSA safety criteria which was initiated in 2006 within the OECD/NEA Working Group Risk. Finally, a separate report has been issued providing general guidance concerning the formulation, application and interpretation of probabilistic criteria. The results from the project can be used as a platform for discussions at the utilities on how to define and use quantitative safety goals. The results can also be used by safety authorities as a reference for risk-informed regulation. The outcome can have an impact on the requirements on PSA, e.g., regarding quality, scope, level of detail, and documentation. Finally, the results can be expected to support on-going activities concerning risk-informed applications
Transformation of correlation coefficients between normal and lognormal distribution and implications for nuclear applications

International Nuclear Information System (INIS)

Žerovnik, Gašper; Trkov, Andrej; Smith, Donald L.; Capote, Roberto

2013-01-01

Inherently positive parameters with large relative uncertainties (typically ≳30%) are often considered to be governed by the lognormal distribution. This assumption has the practical benefit of avoiding the possibility of sampling negative values in stochastic applications. Furthermore, it is typically assumed that the correlation coefficients for comparable multivariate normal and lognormal distributions are equivalent. However, this ideal situation is approached only in the linear approximation which happens to be applicable just for small uncertainties. This paper derives and discusses the proper transformation of correlation coefficients between both distributions for the most general case which is applicable for arbitrary uncertainties. It is seen that for lognormal distributions with large relative uncertainties strong anti-correlations (negative correlations) are mathematically forbidden. This is due to the asymmetry that is an inherent feature of these distributions. Some implications of these results for practical nuclear applications are discussed and they are illustrated with examples in this paper. Finally, modifications to the ENDF-6 format used for representing uncertainties in evaluated nuclear data libraries are suggested, as needed to deal with this issue
Transformation of correlation coefficients between normal and lognormal distribution and implications for nuclear applications

Energy Technology Data Exchange (ETDEWEB)

Žerovnik, Gašper, E-mail: gasper.zerovnik@ijs.si [Jožef Stefan Institute, Jamova cesta 39, SI-1000 Ljubljana (Slovenia); Trkov, Andrej, E-mail: andrej.trkov@ijs.si [Jožef Stefan Institute, Jamova cesta 39, SI-1000 Ljubljana (Slovenia); Smith, Donald L., E-mail: donald.l.smith@anl.gov [Argonne National Laboratory, 1710 Avenida del Mundo, Coronado, CA 92118-3073 (United States); Capote, Roberto, E-mail: roberto.capotenoy@iaea.org [NAPC–Nuclear Data Section, International Atomic Energy Agency, PO Box 100, Vienna-A-1400 (Austria)

2013-11-01

Inherently positive parameters with large relative uncertainties (typically ≳30%) are often considered to be governed by the lognormal distribution. This assumption has the practical benefit of avoiding the possibility of sampling negative values in stochastic applications. Furthermore, it is typically assumed that the correlation coefficients for comparable multivariate normal and lognormal distributions are equivalent. However, this ideal situation is approached only in the linear approximation which happens to be applicable just for small uncertainties. This paper derives and discusses the proper transformation of correlation coefficients between both distributions for the most general case which is applicable for arbitrary uncertainties. It is seen that for lognormal distributions with large relative uncertainties strong anti-correlations (negative correlations) are mathematically forbidden. This is due to the asymmetry that is an inherent feature of these distributions. Some implications of these results for practical nuclear applications are discussed and they are illustrated with examples in this paper. Finally, modifications to the ENDF-6 format used for representing uncertainties in evaluated nuclear data libraries are suggested, as needed to deal with this issue.
Software FMEA analysis for safety-related application software

International Nuclear Information System (INIS)

Park, Gee-Yong; Kim, Dong Hoon; Lee, Dong Young

2014-01-01

Highlights: • We develop a modified FMEA analysis suited for applying to software architecture. • A template for failure modes on a specific software language is established. • A detailed-level software FMEA analysis on nuclear safety software is presented. - Abstract: A method of a software safety analysis is described in this paper for safety-related application software. The target software system is a software code installed at an Automatic Test and Interface Processor (ATIP) in a digital reactor protection system (DRPS). For the ATIP software safety analysis, at first, an overall safety or hazard analysis is performed over the software architecture and modules, and then a detailed safety analysis based on the software FMEA (Failure Modes and Effect Analysis) method is applied to the ATIP program. For an efficient analysis, the software FMEA analysis is carried out based on the so-called failure-mode template extracted from the function blocks used in the function block diagram (FBD) for the ATIP software. The software safety analysis by the software FMEA analysis, being applied to the ATIP software code, which has been integrated and passed through a very rigorous system test procedure, is proven to be able to provide very valuable results (i.e., software defects) that could not be identified during various system tests
Final report of the FAO/IAEA co-ordinated research project on the use of nuclear and related techniques for evaluating the agronomic effectiveness of phosphate fertilisers, in particular rock phosphates

International Nuclear Information System (INIS)

Zapata, F.

1999-02-01

Soils in developing countries are often deficient in available P, and therefore require inputs of P fertiliser for optimum plant growth and production of food and fibre. Due to economic considerations, the cost of applying imported or locally produced water-soluble P fertilisers is often more expensive than utilising indigenous phosphate rock. Phosphate rocks show large differences in their suitability for direct application and several factors influence their capability to supply phosphorus to crops. Therefore, quantifying the P availability of soils amended with phosphate rocks in a variety of crop management and environmental conditions in developing countries is imperative for making recommendations on the best type and rate of P fertiliser sources for maximum agronomic and economic benefits. P-32 isotope techniques are very useful for such studies. The background situation of phosphate research and the topics to be investigated using isotope techniques were critically examined in a Consultants Meeting held at the IAEA Headquarters, Vienna, Austria, from 10 to 12 May 1993. For detailed information please refer to IAEA Report CT-1112. Based on the recommendations of this Consultants' Meeting, the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture with the generous support of the French Government decided to implement the Co-ordinated Research Project (CRP) on 'The Use of Nuclear and Related Techniques for Evaluating the Agronomic Effectiveness of Phosphate Fertilisers, in particular Rock Phosphates'. This final report describes the Fourth and Final RCM of the CRP which was held in Vienna, 16-20 November 1998. It also contains a full description of the project and the conclusions and recommendations of the CRP. The programme of the meeting, list of participants, summaries submitted by the participants and list of publications are included as annexes
Final report of the FAO/IAEA co-ordinated research project on the use of nuclear and related techniques for evaluating the agronomic effectiveness of phosphate fertilisers, in particular rock phosphates

Energy Technology Data Exchange (ETDEWEB)

Zapata, F

1999-02-01

Soils in developing countries are often deficient in available P, and therefore require inputs of P fertiliser for optimum plant growth and production of food and fibre. Due to economic considerations, the cost of applying imported or locally produced water-soluble P fertilisers is often more expensive than utilising indigenous phosphate rock. Phosphate rocks show large differences in their suitability for direct application and several factors influence their capability to supply phosphorus to crops. Therefore, quantifying the P availability of soils amended with phosphate rocks in a variety of crop management and environmental conditions in developing countries is imperative for making recommendations on the best type and rate of P fertiliser sources for maximum agronomic and economic benefits. P-32 isotope techniques are very useful for such studies. The background situation of phosphate research and the topics to be investigated using isotope techniques were critically examined in a Consultants Meeting held at the IAEA Headquarters, Vienna, Austria, from 10 to 12 May 1993. For detailed information please refer to IAEA Report CT-1112. Based on the recommendations of this Consultants' Meeting, the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture with the generous support of the French Government decided to implement the Co-ordinated Research Project (CRP) on 'The Use of Nuclear and Related Techniques for Evaluating the Agronomic Effectiveness of Phosphate Fertilisers, in particular Rock Phosphates'. This final report describes the Fourth and Final RCM of the CRP which was held in Vienna, 16-20 November 1998. It also contains a full description of the project and the conclusions and recommendations of the CRP. The programme of the meeting, list of participants, summaries submitted by the participants and list of publications are included as annexes.
Site selection - siting of the final repository for spent nuclear fuel

International Nuclear Information System (INIS)

2011-03-01

SKB has selected Forsmark as the site for the final repository for spent nuclear fuel. The site selection is the end result of an extensive siting process that began in the early 1990s. The strategy and plan for the work was based on experience from investigations and development work over a period of more than ten years prior to then. This document describes the siting work and SKB's choice of site for the final repository. It also presents the information on which the choice was based and the reasons for the decisions made along the way. The document comprises Appendix PV to applications under the Nuclear Activities Act and the Environmental Code for licences to build and operate an encapsulation plant adjacent to the central interim storage facility for spent nuclear fuel in Oskarshamn, and to build and operate a final repository for spent nuclear fuel in Forsmark in Oesthammar Municipality
Site selection - siting of the final repository for spent nuclear fuel

Energy Technology Data Exchange (ETDEWEB)

2011-03-15

SKB has selected Forsmark as the site for the final repository for spent nuclear fuel. The site selection is the end result of an extensive siting process that began in the early 1990s. The strategy and plan for the work was based on experience from investigations and development work over a period of more than ten years prior to then. This document describes the siting work and SKB's choice of site for the final repository. It also presents the information on which the choice was based and the reasons for the decisions made along the way. The document comprises Appendix PV to applications under the Nuclear Activities Act and the Environmental Code for licences to build and operate an encapsulation plant adjacent to the central interim storage facility for spent nuclear fuel in Oskarshamn, and to build and operate a final repository for spent nuclear fuel in Forsmark in Oesthammar Municipality
A Progress Report on Artificial Intelligence: Hospital Applications and a Review of the Artificial Intelligence Marketplace

OpenAIRE

Brenkus, Lawrence M.

1984-01-01

Artificial intelligence applications are finally beginning to move from the university research laboratory into commercial use. Before the end of the century, this new computer technology will have profound effects on our work, economy, and lives. At present, relatively few products have appeared in the hospital, but we can anticipate significant product offerings in instrumentation and affecting hospital administration within 5 years.
The application of redundancy-related basic safety principles to the 1400 MWE reactor core standby cooling system

International Nuclear Information System (INIS)

Bertrand, R.

1990-01-01

This memorandum shall provide the background for the work of the European Community Commission which is to analyze safety principles relating to redundancy. The redundancy-related basic safety principles applied in French nuclear power plants are the following: . the single-failure criterion, . provisions additional to application of the single-failure criterion. These are mainly provisions made at the design stage to minimize risks associated with common cause failures or the risks of human error which can lead to such failures: - protection against hazards of internal and external origin, - the geographical or physical separation of equipment, - the independence of electrical power supplies and distribution systems, - the additional resources and associated operating procedures making it possible to accommodate total loss of the safety systems. The scope also includes the operating rules which ensure availability of redundant safety-related equipment. The provisions relating to the single-failure criterion are detailed in Basic Safety Rule 1.3.A appended. The application of these principles proposed by the operating organization and accepted by the safety authorities for the design and operation of the standby core cooling system (System RIS) is explained
Applications of radionuclides in industry; Applications des radioelements a l'industrie

Energy Technology Data Exchange (ETDEWEB)

Leveque, P [Commissariat a l' Energie Atomique, Paris (France). Centre d' Etudes Nucleaires

1955-07-01

After a brief recall of a few concepts (mass number, charge and beams properties) and the description of used detectors (ionization chamber, Geiger-Mueller counter, scintillation counters), some radionuclides applications are described. In a first part, the well-developed applications are presented in three distinct groups: continuous applications such as {beta} and {gamma} gauges (determination hydrogen content of an hydrocarbon and content of an emulsion; discharge of static electricity), discontinuous applications such as radiography and autoradiography, wear or manufacture problems (distribution of a fungicide on tobacco) and finally, applications in research laboratories such as diffusion, exchange and solubility. It also describes the applications which are still in development such as the action of beams on matter (reticulation and degradation of polymers, monomers polymerisation, cold sterilization). In conclusion, few advices on the opportunity of such applications and the choice of the radionuclides are given. (M.P.)
A STATISTICAL ANALYSIS OF GDP AND FINAL CONSUMPTION USING SIMPLE LINEAR REGRESSION. THE CASE OF ROMANIA 1990–2010

OpenAIRE

Aniela Balacescu; Marian Zaharia

2011-01-01

This paper aims to examine the causal relationship between GDP and final consumption. The authors used linear regression model in which GDP is considered variable results, and final consumption variable factor. In drafting article we used Excel software application that is a modern computing and statistical data analysis.

Vacuum insulation - Panel properties and building applications. HiPTI - High Performance Thermal Insulation - IEA/ECBCS Annex 39 - Final report

Energy Technology Data Exchange (ETDEWEB)

Erb, M. (ed.)

2005-12-15

This paper takes a look at the properties of vacuum insulation panels (VIP) that have already been developed some time ago for use in appliances such as refrigerators and deep-freezers. Their insulation performance is a factor of five to ten times better than that of conventional insulation. The paper discusses the use of such panels in buildings to provide thin, highly-insulating constructions for walls, roofs and floors. The motivation for examining the applicability of high performance thermal insulation in buildings is discussed, including solutions where severe space limitations and other technical and aesthetic considerations exist. The use of nano-structured materials and laminated foils is examined and discussed. The questions arising from the use of such panels in buildings is discussed and the open questions and risks involved are examined. Finally, an outlook on the introduction of VIP technology is presented and quality assurance aspects are examined. This work was done within the framework of the Task 39 'High Performance Thermal Insulation' of the 'Energy Conservation in Buildings and Community Systems ECBCS' programme of the International Energy Agency IEA.
4D Dynamic Required Navigation Performance Final Report

Science.gov (United States)

Finkelsztein, Daniel M.; Sturdy, James L.; Alaverdi, Omeed; Hochwarth, Joachim K.

2011-01-01

New advanced four dimensional trajectory (4DT) procedures under consideration for the Next Generation Air Transportation System (NextGen) require an aircraft to precisely navigate relative to a moving reference such as another aircraft. Examples are Self-Separation for enroute operations and Interval Management for in-trail and merging operations. The current construct of Required Navigation Performance (RNP), defined for fixed-reference-frame navigation, is not sufficiently specified to be applicable to defining performance levels of such air-to-air procedures. An extension of RNP to air-to-air navigation would enable these advanced procedures to be implemented with a specified level of performance. The objective of this research effort was to propose new 4D Dynamic RNP constructs that account for the dynamic spatial and temporal nature of Interval Management and Self-Separation, develop mathematical models of the Dynamic RNP constructs, "Required Self-Separation Performance" and "Required Interval Management Performance," and to analyze the performance characteristics of these air-to-air procedures using the newly developed models. This final report summarizes the activities led by Raytheon, in collaboration with GE Aviation and SAIC, and presents the results from this research effort to expand the RNP concept to a dynamic 4D frame of reference.
Multimedia forensics and security foundations, innovations, and applications

CERN Document Server

Fouad, Mohamed; Manaf, Azizah; Zamani, Mazdak; Ahmad, Rabiah; Kacprzyk, Janusz

2017-01-01

This book presents recent applications and approaches as well as challenges in digital forensic science. One of the evolving challenges that is covered in the book is the cloud forensic analysis which applies the digital forensic science over the cloud computing paradigm for conducting either live or static investigations within the cloud environment. The book also covers the theme of multimedia forensics and watermarking in the area of information security. That includes highlights on intelligence techniques designed for detecting significant changes in image and video sequences. Moreover, the theme proposes recent robust and computationally efficient digital watermarking techniques. The last part of the book provides several digital forensics related applications, including areas such as evidence acquisition enhancement, evidence evaluation, cryptography, and finally, live investigation through the importance of reconstructing the botnet attack scenario to show the malicious activities and files as evidence...
Application of high temperature superconductivity to electric motor design

International Nuclear Information System (INIS)

Edmonds, J.S.; Sharma, D.K.; Jordan, H.E.; Edick, J.D.; Schiferl, R.F.

1992-01-01

This paper reports on progress made in a joint project conducted by the Electric Power Research Institute and Reliance Electric Company to study the possible application of High Temperature Super Conductors (HTSC), materials to electric motors. Specific applications are identified which can be beneficially served by motors constructed with HTSC materials. A summary is presented of the components and design issues related to HTSC motors designed for these applications. During the course of this development program, a three tier HTSC wire performance specification has evolved. The three specifications and the rationale behind these three levels of performance are explained. A description of a test motor that has been constructed to verify the electromagnetic analytical techniques of HTSC motor design is given. Finally, a DC motor with an HTSC field coil is described. Measured data with the motor running is presented showing that the motor is operating with the field winding in the superconducting state
Building more powerful less expensive supercomputers using Processing-In-Memory (PIM) LDRD final report.

Energy Technology Data Exchange (ETDEWEB)

Murphy, Richard C.

2009-09-01

This report details the accomplishments of the 'Building More Powerful Less Expensive Supercomputers Using Processing-In-Memory (PIM)' LDRD ('PIM LDRD', number 105809) for FY07-FY09. Latency dominates all levels of supercomputer design. Within a node, increasing memory latency, relative to processor cycle time, limits CPU performance. Between nodes, the same increase in relative latency impacts scalability. Processing-In-Memory (PIM) is an architecture that directly addresses this problem using enhanced chip fabrication technology and machine organization. PIMs combine high-speed logic and dense, low-latency, high-bandwidth DRAM, and lightweight threads that tolerate latency by performing useful work during memory transactions. This work examines the potential of PIM-based architectures to support mission critical Sandia applications and an emerging class of more data intensive informatics applications. This work has resulted in a stronger architecture/implementation collaboration between 1400 and 1700. Additionally, key technology components have impacted vendor roadmaps, and we are in the process of pursuing these new collaborations. This work has the potential to impact future supercomputer design and construction, reducing power and increasing performance. This final report is organized as follow: this summary chapter discusses the impact of the project (Section 1), provides an enumeration of publications and other public discussion of the work (Section 1), and concludes with a discussion of future work and impact from the project (Section 1). The appendix contains reprints of the refereed publications resulting from this work.
15 CFR 785.19 - Payment of final assessment.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Payment of final assessment. 785.19 Section 785.19 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE ADDITIONAL PROTOCOL REGULATIONS ENFORCEMENT § 785...
TiO{sub 2} nanotubes and mesosponges. Towards solar cells and related applications

Energy Technology Data Exchange (ETDEWEB)

Kim, Doohun

2010-07-06

There has been a considerable interest in nano-oxide materials owing to their remarkable characteristics in electrical, optical and chemical properties which have led to various applications. Among the various oxides, titanium dioxide (TiO{sub 2}) is the most widely studied material, because of its promising applications in photocatalysts, biomedical devices and solar cells with its non-toxic nature, high chemical stability and relatively low production cost. However, photoinduced processes in TiO{sub 2} typically require UV light irradiation due to its comparably high bandgap energy. This does not allow an efficient use of solar energy, because only 2{proportional_to}5% of the solar spectrum are in the UV range. Therefore, considerable efforts have been made to engineer the bandgap by doping of TiO{sub 2} photoelectrode with suitable species or by sensitization with visible light absorbers to enhance the solar light conversion efficiency in the visible range. In many applications, TiO{sub 2} layers have been prepared by a variety of techniques such as sol-gel, e-beam evaporation, magnetron sputtering, anodization, etc. Especially, anodization is a simple and exquisite method for synthesizing TiO{sub 2} nanostructures, and thus anodization is a promising method that can be considered as a convenient and cost-effective process. Since the last decade, a significant body of work on anodization has been dedicated to form self-organized and highly ordered nanotube oxide layers. Their morphologies (e.g. nanotube length, diameter and geometrical modification) and crystallinities (e.g. amorphous, anatase and rutile) can be tuned and adjusted to their applications by tailoring the anodization and annealing conditions. In this work, the electrochemical single step anodization process in fluoride-containing electrolytes is employed to prepare vertically oriented TiO{sub 2} nanotubes. Furthermore, we introduce an entirely novel anodization approach to prepare a mesoporous Ti
Clinical Applications of a CT Window Blending Algorithm: RADIO (Relative Attenuation-Dependent Image Overlay).

Science.gov (United States)

Mandell, Jacob C; Khurana, Bharti; Folio, Les R; Hyun, Hyewon; Smith, Stacy E; Dunne, Ruth M; Andriole, Katherine P

2017-06-01

A methodology is described using Adobe Photoshop and Adobe Extendscript to process DICOM images with a Relative Attenuation-Dependent Image Overlay (RADIO) algorithm to visualize the full dynamic range of CT in one view, without requiring a change in window and level settings. The potential clinical uses for such an algorithm are described in a pictorial overview, including applications in emergency radiology, oncologic imaging, and nuclear medicine and molecular imaging.
Development of high field superconductors for fusion energy applications. Final report

International Nuclear Information System (INIS)

1985-01-01

The purpose of this project was to develop a conductor design and a manufacturing procedure for a composite multifilamentary Nb 3 Sn conductor suitable for winding a magnet for use in a fusion energy power plant. Effort was concentrated on the design of a conductor with tubular niobium filaments in a copper matrix. Bronze in the bores of the filaments would react with the niobium to form Nb 3 Sn on the inside diameter of the niobium tubular filaments during a heat treatment at final size. Four filament geometries were evaluated. The addition of titanium to the bronze was found to increase the current density. The use of a hydrogen atmosphre did not appear to cause any increase in current density. Primary billets were assembled and extruded with five tubular filament designs and for comparison, five rod type filament designs. Billet designs are described
MORAL ECONOMY AND FOREST CERTIFICATION - SYSTEMATIC REVIEW OF THE FINAL CONSUMER PERCEPTION

Directory of Open Access Journals (Sweden)

Gustavo Leonardo Simão

2016-08-01

Full Text Available The paper aims to analyze the perception of the final consumer in relation to forest certification. The research was performed through a systematic analysis by integrative contextualista approach, where were identified information on the recognition of the final consumer in relation to forest certification process in seven different countries. The results showed that only a small fraction in the consumer market is aware of the certification process in the forestry sector even in the economically developed regions. The findings show that one of the possible reasons for the increase of production of forest certified products in the last years is less by a requirement of final consumer and more for to a source of the product warranty along to intermediate actors in the forest value chain. There is also the possibility of requirements of forest certification made by intermediaries agents, in forest supply chain, figure as non-tariff barrier. Moreover, the focus of marketing activities for better efficiency should focus its activities not only in the final consumer, should also focus attention on to intermediaries agents.
Are Final Comments in Web Survey Panels Associated with Next-Wave Attrition?

Directory of Open Access Journals (Sweden)

Cynthia McLauchlan

2016-12-01

Full Text Available Near the end of a web survey respondents are often asked whether they have further comments. Such final comments are usually ignored, in part because open-ended questions are challenging to analyse. We explored whether final comments are associated with next-wave attrition in survey panels. We categorized a random sample of final comments in the Longitudinal Studies for the Social Sciences (LISS panel and Dutch Immigrant panel into one of eight categories (neutral, positive, six subcategories of negative and regressed the indicator of next-wave attrition on comment length, comment category and socio-demographic variables. In the Immigrant panel we found shorter final comments (55 words with decreased next-wave attrition relative to making no comment. Comments about unclear survey questions quadruple the odds of attrition and “other” (uncategorized negative comments almost double the odds of attrition. In the LISS panel, making a comment (vs. not and comment length are not associated with attrition. However, when specifying individual comment categories, neutral comments are associated with half the odds of attrition relative to not making a comment.
Victims of ‘private’ crimes and application of human rights in interpersonal relations

Directory of Open Access Journals (Sweden)

Reiter Axelle

2013-01-01

Full Text Available International human rights law has been challenged because of its alleged inability to safeguard the rights of the most vulnerable victims of violence. Whereas in real life they are often marginalized and effectively left without adequate protection, this is not to be attributed to the absence of an appropriate normative framework but rather to the contempt, lack of enforcement and systemic neglect of their claims. This paper proposes to find a ‘cure’ inside international human rights law, by strengthening the mechanisms that permit a horizontal application of human rights standards in private relations. The paper is divided in four sections. The first section describes the problematic at hand, focusing in particular on violence against women and children. The three subsequent sections then analyze the avenues open to victims in order to claim a ‘third-party’ application of human rights treaties against non-state actors who have violated their fundamental rights.
Quality and environmental aspects in relation to the application of pulverized fuel ash

International Nuclear Information System (INIS)

Berg, J.W. van den

1991-01-01

In the Netherlands pulverised coal from different parts of the world is used in 5 coalfired power stations which each have 1 to 3 boilers, which in turn are equipped with various types of burners. This causes a large variation in the composition of the pulverized fuel ash (PFA). The PFA is marketed in several areas, each of which has its own specific quality requirements. These requirements are partially dictated in standard specifications. In order to obtain insight into the quality of the PFA, samples are taken and analysed daily. Rules for certification, concerning the quality and the quality control of PFA for use in concrete in The Netherlands have been agreed upon. The environmental aspects in relation to the application of PFA concern the working conditions and health aspects during processing and the environmental impact when PFA is used as a building material. The Dutch legislation concerning the environmental consequences of the application of PFA and other secondary materials is currently under review. 3 tabs
Elements of relativity theory

International Nuclear Information System (INIS)

Lawden, D.F.

1985-01-01

The book on elements of relativity theory is intended for final year school students or as an early university course in mathematical physics. Special principle of relativity, lorentz transformation, velocity transformations, relativistic mechanics, and general theory of relativity, are all discussed. (U.K.)
Schedulability Analysis for Java Finalizers

DEFF Research Database (Denmark)

Bøgholm, Thomas; Hansen, Rene Rydhof; Søndergaard, Hans

2010-01-01

Java finalizers perform clean-up and finalisation of objects at garbage collection time. In real-time Java profiles the use of finalizers is either discouraged (RTSJ, Ravenscar Java) or even disallowed (JSR-302), mainly because of the unpredictability of finalizers and in particular their impact...... on the schedulability analysis. In this paper we show that a controlled scoped memory model results in a structured and predictable execution of finalizers, more reminiscent of C++ destructors than Java finalizers. Furthermore, we incorporate finalizers into a (conservative) schedulability analysis for Predictable Java...... programs. Finally, we extend the SARTS tool for automated schedulability analysis of Java bytecode programs to handle finalizers in a fully automated way....
Demonstration of diesel fired coolant heaters in school bus applications : final report.

Science.gov (United States)

2010-04-01

Engine block pre-heating can reduce fuel consumption, decrease pollution, extend engine life, and it is often necessary for reliably starting diesel engines in cold climates. This report describes the application and experience of applying 36 diesel ...
Civilian applications of laser fusion

International Nuclear Information System (INIS)

Maniscalco, J.; Blink, J.; Buntzen, R.; Hovingh, J.; Meier, W.; Monsler, M.; Walker, P.

1978-01-01

The commercial aspects of laser fusion were evaluated in an attempt to relate the end products (neutrons and energy) to significant commercial applications. We have found that by far the largest markets and highest payoffs for laser fusion are associated with electric power production. Hence, much of this report evaluates the prospects of producing commercial electricity with laser fusion. To this end, we have described in detail a new and promising laser fusion concept--the liquid lithium waterfall reactor. In addition, we have taken the most attractive features from our laser fusion studies and used them to compare laser fusion to other long-range sources of energy (breeder reactors and solar energy). It is our contention that all three sources of electrical energy should be developed to the point where the final selections are primarily based on economic competitiveness. The other potential applications of laser fusion (fissile fuel production, synthetic fuel production, actinide burning, and propulsion) are also discussed, and our preliminary plan for the engineering development of laser fusion is presented
Civilian applications of laser fusion

International Nuclear Information System (INIS)

Maniscalco, J.; Blink, J.; Buntzen, R.; Hovingh, J.; Meier, W.; Monsler, M.; Walker, P.

1977-01-01

The commercial aspects of laser fusion were evaluated in an attempt to relate the end products (neutrons and energy) to significant commercial applications. It was found that by far the largest markets and highest payoffs for laser fusion are associated with electric power production. Hence, much of this report evaluates the prospects of producing commercial electricity with laser fusion. To this end, we have described in detail a new and promising laser fusion concept--the liquid lithium waterfall reactor. In addition, we have taken the most attractive features from our laser studies and used them to compare laser fusion to other long-range sources of energy (breeder reactors and solar energy). It is our contention that all three sources of electrical energy should be developed to the point where the final selections are primarily based on economic competitiveness. The other potential applications of laser fusion (fissile fuel production, synthetic fuel production, actinide burning, and propulsion) are also discussed, and our preliminary plan for the engineering development of laser fusion is presented
Civilian applications of laser fusion

Energy Technology Data Exchange (ETDEWEB)

Maniscalco, J.; Blink, J.; Buntzen, R.; Hovingh, J.; Meier, W.; Monsler, M.; Walker, P.

1977-11-17

The commercial aspects of laser fusion were evaluated in an attempt to relate the end products (neutrons and energy) to significant commercial applications. It was found that by far the largest markets and highest payoffs for laser fusion are associated with electric power production. Hence, much of this report evaluates the prospects of producing commercial electricity with laser fusion. To this end, we have described in detail a new and promising laser fusion concept--the liquid lithium waterfall reactor. In addition, we have taken the most attractive features from our laser studies and used them to compare laser fusion to other long-range sources of energy (breeder reactors and solar energy). It is our contention that all three sources of electrical energy should be developed to the point where the final selections are primarily based on economic competitiveness. The other potential applications of laser fusion (fissile fuel production, synthetic fuel production, actinide burning, and propulsion) are also discussed, and our preliminary plan for the engineering development of laser fusion is presented.
White Dwarfs in Star Clusters: The Initial-Final Mass Relation for Stars from 0.85 to 8 M$_\\odot$

Science.gov (United States)

Cummings, Jeffrey; Kalirai, Jason; Tremblay, P.-E.; Ramírez-Ruiz, Enrico

2018-01-01

The spectroscopic study of white dwarfs provides both their mass, cooling age, and intrinsic photometric properties. For white dwarfs in the field of well-studied star clusters, this intrinsic photometry can be used to determine if they are members of that star cluster. Comparison of a member white dwarf's cooling age to its total cluster's age provides the evolutionary timescale of its progenitor star, and hence the mass. This is the initial-final mass relation (IFMR) for stars, which gives critical information on how a progenitor star evolves and loses mass throughout its lifetime, and how this changes with progenitor mass. Our work, for the first time, presents a uniform analysis of 85 white dwarf cluster members spanning from progenitor masses of 0.85 to 8 M$_\\odot$. Comparison of our work to theoretical IFMRs shows remarkable consistency in their shape but differences remain. We will discuss possible explanations for these differences, including the effects of stellar rotation.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.