Thermal Modeling and Management of Solid Oxide Fuel Cells Operating with Internally Reformed Methane

Science.gov (United States)

Wu, Yiyang; Shi, Yixiang; Cai, Ningsheng; Ni, Meng

2018-06-01

A detailed three-dimensional mechanistic model of a large-scale solid oxide fuel cell (SOFC) unit running on partially pre-reformed methane is developed. The model considers the coupling effects of chemical and electrochemical reactions, mass transport, momentum and heat transfer in the SOFC unit. After model validation, parametric simulations are conducted to investigate how the methane pre-reforming ratio affects the transport and electrochemistry of the SOFC unit. It is found that the methane steam reforming reaction has a "smoothing effect", which can achieve more uniform distributions of gas compositions, current density and temperature among the cell plane. In the case of 1500 W/m2 power density output, adding 20% methane absorbs 50% of internal heat production inside the cell, reduces the maximum temperature difference inside the cell from 70 K to 22 K and reduces the cathode air supply by 75%, compared to the condition of completely pre-reforming of methane. Under specific operating conditions, the pre-reforming ratio of methane has an optimal range for obtaining a good temperature distribution and good cell performance.

Performance and endurance of a PEMFC operated with synthetic reformate fuel feed

Energy Technology Data Exchange (ETDEWEB)

Sishtla, C; Koncar, G; Platon, R [Institute of Gas Technology, Des Plaines, IL (United States); Gamburzev, S; Appleby, A J [Texas Engineering Experimental Station, Texas A and M Univ. System, College Station, TX (United States). Center for Electrochemical Systems and Hydrogen Research; Velev, O A [AeroVironment, Inc., Monrovia, CA (United States)

1998-03-15

Widespread implementation of polymer electrolyte membrane fuel cell (PEMFC) powerplants for stationary and vehicular applications will be dependent in the near future on using readily available hydrocarbon fuels as the source of the hydrogen fuel. Methane and propane are ideal fuels for stationary applications, while methanol, gasoline, and diesel fuel are better suited for vehicular applications. Various means of fuel processing are possible to produce a gaseous fuel containing H{sub 2}, CO{sub 2} and CO. CO is a known electrocatalyst poison and must be reduced to low (10`s) ppm levels and CO{sub 2} is said to cause additional polarization effects. Even with no CO in the feed gas a H{sub 2}/CO{sub 2}/H{sub 2}O gas mixture will form some CO. Therefore, as a first step of developing a PEMFC that can operate for thousands of hours using a reformed fuel, we used an anode gas feed of 80% H{sub 2} and 20% CO{sub 2} to simulate the reforming of CH{sub 4}. To investigate the effect of reformate on cell performance and endurance, a single cell with an active area of 58 cm{sup 2} was assembled with a membrane electrode assembly (MEA) furnished by Texas A and M University using IGT`s internally manifolded heat exchange (IMHEX{sup TM}) design configuration. The MEA consisted of a Nafion 112 membrane with anode and cathode Pt catalyst loadings of 0.26 and 1.46 mg/cm{sup 2}, respectively. The cell was set to operate on a synthetic reformate - air at 60 C and 1 atm and demonstrated over 5000 h of endurance with a decay rate of less than 1%/1000 h of operation. The cell also underwent four successful thermal cycles with no appreciable loss in performance. The stable performance is attributed to a combination of the IGT IMHEX plate design with its inherent uniform gas flow distribution across the entire active area and MEA quality. The effects of temperature, gas composition, fuel utilization (stoics) and thermal cycle on cell performance are described. (orig.)

40 CFR Table 21 to Subpart Uuu of... - Continuous Compliance With Operating Limits for Organic HAP Emissions From Catalytic Reforming Units

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Continuous Compliance With Operating Limits for Organic HAP Emissions From Catalytic Reforming Units 21 Table 21 to Subpart UUU of Part 63... Compliance With Operating Limits for Organic HAP Emissions From Catalytic Reforming Units As stated in § 63...

La riforma del FMI: alcune questioni organizzatIve e operative (Reforming the IMF: Some Organizational and Operational Issues

Directory of Open Access Journals (Sweden)

Hossein Askari

2000-03-01

Full Text Available While financial crises during the 1990s have started a lively debate on IMF policies toward member countries, reform of the Fund's organizational structure and operations have been largely ignored. Improved organization and operations would increase IMF efficiency and membership participation, which would in turn increase IMF effectiveness in enhancing global economic conditions. In this paper, a number of such issues--quotas, voting structure and decision making; executive board and ministerial committees; management structure and staff; political dimensions, transparency and credibility--are assessed.

Heat and fuel coupled operation of a high temperature polymer electrolyte fuel cell with a heat exchanger methanol steam reformer

Science.gov (United States)

Schuller, G.; Vázquez, F. Vidal; Waiblinger, W.; Auvinen, S.; Ribeirinha, P.

2017-04-01

In this work a methanol steam reforming (MSR) reactor has been operated thermally coupled to a high temperature polymer electrolyte fuel cell stack (HT-PEMFC) utilizing its waste heat. The operating temperature of the coupled system was 180 °C which is significantly lower than the conventional operating temperature of the MSR process which is around 250 °C. A newly designed heat exchanger reformer has been developed by VTT (Technical Research Center of Finland LTD) and was equipped with commercially available CuO/ZnO/Al2O3 (BASF RP-60) catalyst. The liquid cooled, 165 cm2, 12-cell stack used for the measurements was supplied by Serenergy A/S. The off-heat from the electrochemical fuel cell reaction was transferred to the reforming reactor using triethylene glycol (TEG) as heat transfer fluid. The system was operated up to 0.4 A cm-2 generating an electrical power output of 427 Wel. A total stack waste heat utilization of 86.4% was achieved. It has been shown that it is possible to transfer sufficient heat from the fuel cell stack to the liquid circuit in order to provide the needed amount for vaporizing and reforming of the methanol-water-mixture. Furthermore a set of recommendations is given for future system design considerations.

Model for Investigation of Operational Wind Power Plant Regimes with Doubly–Fed Asynchronous Machine in Power System

Directory of Open Access Journals (Sweden)

R. I. Mustafayev

2012-01-01

Full Text Available The paper presents methodology for mathematical modeling of power system (its part when jointly operated with wind power plants (stations that contain asynchronous doubly-fed machines used as generators. The essence and advantage of the methodology is that it allows efficiently to mate equations of doubly-fed asynchronous machines, written in the axes that rotate with the machine rotor speed with the equations of external electric power system, written in synchronously rotating axes.

Analysis of doubly-fed induction machine operating at motoring mode subjected to voltage sag

Directory of Open Access Journals (Sweden)

Navneet Kumar

2016-09-01

Full Text Available Variable Speed (VS Pumped Storage Plants (PSP equipped with large asynchronous (Doubly-Fed Induction machines are emerging now in hydropower applications. Motoring mode of operation of Doubly-Fed Induction Machine (DFIM is essential and techno-economical in this application due to: (1 its uniqueness in active power controllability, (2 bulk power handing capability with less rated power converters in rotor circuit, and (3 integrating Renewable Energy Sources (RES. This paper investigates the performance of two DFIMs at different power ratings (2.2 kW and 2 MW under voltage sag with different attribute. The test results are analyzed in terms of the peaks in torque, speed, power taken and transient currents in rotor and stator circuits. During sag, stable region for DFIM operation along with speed and stator side reactive power input control is also illustrated. The negative effects of voltage sag are briefly discussed. MATLAB simulation is validated with experimentation. The various observations during simulation and experimental analysis are also supported by the theoretical explanations.

General concept of a gas engine for a hybrid vehicle, operating on methanol dissociation products

International Nuclear Information System (INIS)

Tartakovsky, L.; Aleinikov, Y.; Fainberg, V.; Garbar, A.; Gutman, M.; Hetsroni, G.; Schindler, Y.; Zvirin, Y.

1998-01-01

The paper presents a general concept of a hybrid propulsion system, based on an SI internal combustion engine fueled by methanol dissociation products (MDP). The proposed hybrid propulsion scheme is a series hybrid, which allows the engine to be operated in an on-off mode at constant optimal regime. The engine is fed by gaseous products of methanol dissociation (mainly hydrogen and carbon monoxide) emerging from an on-board catalytic reformer. The general scheme and base operation features of the propulsion system are described. The benefits that may be achieved by combining the well-known idea of on-board methanol dissociation with the hybrid vehicle concept are discussed. The proposed scheme is compared with those of systems operating on gasoline, liquid methanol, hydrogen and also with the multi-regime (not hybrid) engine fed by MDP

Thermoelectric characterization of an intermediate temperature solid oxide fuel cell system directly fed by dry biogas

International Nuclear Information System (INIS)

De Lorenzo, G.; Corigliano, O.; Lo Faro, M.; Frontera, P.; Antonucci, P.; Zignani, S.C.; Trocino, S.; Mirandola, F.A.; Aricò, A.S.; Fragiacomo, P.

2016-01-01

Highlights: • Numerical Model (NM) of SOFC Cogenerative System (SCS) fed by dry biogas is set up. • NM simulates new Ni-Fe/CGO protective layer for direct CH_4 consumption at the anode. • NM simulates the anode carbonation phenomenon and is experimentally validated. • The performance parameters trends of SCS fed by three types of dry biogas are shown. • SEM images after 40 h of operation show that there is no anode carbon deposition. - Abstract: A properly manufactured intermediate temperature Solid Oxide Fuel Cell (SOFC) can be directly fed by dry biogas, considering also the electrochemical partial and total oxidation reactions of methane in the biogas at the anode. In this way the methane in the biogas is electrochemically consumed directly at the fuel cell without the need to mix the biogas with any reforming gas (steam, oxygen or carbon dioxide). In this article, a numerical model of an SOFC system with Ni-Fe/CGO electrocatalyst anode protective layer directly fed by dry biogas, in cogenerative arrangement and with anode exhaust gas recirculation is formulated. The influences of biogas composition, of fuel cell operating current density and of percentage of recirculated anode exhaust gas on the SOFC system performances were evaluated by calculation code. An SOFC test bench was set up to validate the calculation code results experimentally. Furthermore, the numerical model also considers the anode carbonation and evaluates the amount of carbon that can be formed in the anode at chemical equilibrium and quasi-equilibrium conditions associated with the specific anode protective layer used.

Direct ethanol solid oxide fuel cell operating in gradual internal reforming

Science.gov (United States)

Nobrega, S. D.; Galesco, M. V.; Girona, K.; de Florio, D. Z.; Steil, M. C.; Georges, S.; Fonseca, F. C.

2012-09-01

An electrolyte supported solid oxide fuel cell (SOFC) using standard electrodes, doped-lanthanum manganite cathode and Ni-cermet anode, was operated with direct (anhydrous) ethanol for more than 100 h, delivering essentially the same power output as running on hydrogen. A ceria-based layer provides the catalytic activity for the gradual internal reforming, which uses the steam formed by the electrochemical oxidation of hydrogen for the decomposition of ethanol. Such a concept opens up the way for multi-fuel SOFCs using standard components and a catalytic layer.

Performance analysis of a SOFC under direct internal reforming conditions

Energy Technology Data Exchange (ETDEWEB)

Janardhanan, Vinod M.; Deutschmann, Olaf [Institute for Chemical Technology and Polymer Chemistry, Engesserstr 20, D-76131 Karlsruhe, University of Karlsruhe (Germany); Heuveline, Vincent [Institute for Applied and Numerical Mathematics, Kaiserstr. 12, D-76128 Karlsruhe (Germany)

2007-10-11

This paper presents the performance analysis of a planar solid-oxide fuel cell (SOFC) under direct internal reforming conditions. A detailed solid-oxide fuel cell model is used to study the influences of various operating parameters on cell performance. Significant differences in efficiency and power density are observed for isothermal and adiabatic operational regimes. The influence of air number, specific catalyst area, anode thickness, steam to carbon (s/c) ratio of the inlet fuel, and extend of pre-reforming on cell performance is analyzed. In all cases except for the case of pre-reformed fuel, adiabatic operation results in lower performance compared to isothermal operation. It is further discussed that, though direct internal reforming may lead to cost reduction and increased efficiency by effective utilization of waste heat, the efficiency of the fuel cell itself is higher for pre-reformed fuel compared to non-reformed fuel. Furthermore, criteria for the choice of optimal operating conditions for cell stacks operating under direct internal reforming conditions are discussed. (author)

Performance analysis of a SOFC under direct internal reforming conditions

Science.gov (United States)

Janardhanan, Vinod M.; Heuveline, Vincent; Deutschmann, Olaf

This paper presents the performance analysis of a planar solid-oxide fuel cell (SOFC) under direct internal reforming conditions. A detailed solid-oxide fuel cell model is used to study the influences of various operating parameters on cell performance. Significant differences in efficiency and power density are observed for isothermal and adiabatic operational regimes. The influence of air number, specific catalyst area, anode thickness, steam to carbon (s/c) ratio of the inlet fuel, and extend of pre-reforming on cell performance is analyzed. In all cases except for the case of pre-reformed fuel, adiabatic operation results in lower performance compared to isothermal operation. It is further discussed that, though direct internal reforming may lead to cost reduction and increased efficiency by effective utilization of waste heat, the efficiency of the fuel cell itself is higher for pre-reformed fuel compared to non-reformed fuel. Furthermore, criteria for the choice of optimal operating conditions for cell stacks operating under direct internal reforming conditions are discussed.

Design of a nuclear steam reforming plant

International Nuclear Information System (INIS)

Malherbe, J.

1980-01-01

The design of a plant for the steam reforming of methane using a High Temperature Reactor has been studied by CEA in connection with the G.E.G.N. This group of companies (CEA, GAZ DE FRANCE, CHARBONNAGES DE FRANCE, CREUSOT-LOIRE, NOVATOME) is in charge of studying the feasibility of the coal gasification process by using a nuclear reactor. The process is based on the hydrogenation of the coal in liquid phase with hydrogen produced by a methane steam reformer. The reformer plant is fed by a pipe of natural gas or SNG. The produced hydrogen feeds the gasification plant which could not be located on the same site. An intermediate hydrogen storage between the two plants could make the coupling more flexible. The gasification plant does not need a great deal of heat and this heat can be satisfied mostly by internal heat exchanges

Loss Minimizing Operation of Doubly Fed Induction Generator Based Wind Generation Systems Considering Reactive Power Provision

DEFF Research Database (Denmark)

Baohua, Zhang; Hu, Weihao; Chen, Zhe

2014-01-01

The paper deals with control techniques for minimizing the operating loss of doubly fed induction generator based wind generation systems when providing reactive power. The proposed method achieves its goal through controlling the rotor side q-axis current in the synchronous reference frame...

Hydrogen generation utilizing integrated CO2 removal with steam reforming

Science.gov (United States)

Duraiswamy, Kandaswamy; Chellappa, Anand S

2013-07-23

A steam reformer may comprise fluid inlet and outlet connections and have a substantially cylindrical geometry divided into reforming segments and reforming compartments extending longitudinally within the reformer, each being in fluid communication. With the fluid inlets and outlets. Further, methods for generating hydrogen may comprise steam reformation and material adsorption in one operation followed by regeneration of adsorbers in another operation. Cathode off-gas from a fuel cell may be used to regenerate and sweep the adsorbers, and the operations may cycle among a plurality of adsorption enhanced reformers to provide a continuous flow of hydrogen.

Power and hydrogen production from ammonia in a micro-thermophotovoltaic device integrated with a micro-reformer

International Nuclear Information System (INIS)

Um, Dong Hyun; Kim, Tae Young; Kwon, Oh Chae

2014-01-01

Power and hydrogen (H 2 ) production by burning and reforming ammonia (NH 3 ) in a micro-TPV (microscale-thermophotovoltaic) device integrated with a micro-reformer is studied experimentally. A heat-recirculating micro-emitter with the cyclone and helical adapters that enhance the residence time of fed fuel-air mixtures and uniform burning burns H 2 -added NH 3 -air mixtures. A micro-reformer that converts NH 3 to H 2 using ruthenium as a catalyst surrounds the micro-emitter as a heat source. The micro-reformer is surrounded by a chamber, the inner and outer walls of which have installations of gallium antimonide photovoltaic cells and cooling fins. For the micro-reformer-integrated micro-TPV device the maximum overall efficiency of 8.1% with electrical power of 4.5 W and the maximum NH 3 conversion rate of 96.0% with the H 2 production rate of 22.6 W (based on lower heating value) are obtained, indicating that the overall efficiency is remarkably enhanced compared with 2.0% when the micro-TPV device operates alone. This supports the potential of improving the overall efficiency of a micro-TPV device through integrating it with a micro-reformer. Also, the feasibility of using NH 3 as a carbon-free fuel for both burning and reforming in practical micro power and H 2 generation devices has been demonstrated. - Highlights: • Performance of micro-TPV device integrated with micro-reformer is evaluated. • Feasibility of using NH 3 –H 2 blends in integrated system has been demonstrated. • Integration with micro-reformer improves performance of micro-TPV device. • Maximum overall efficiency of 8.1% is found compared with 2.0% without integration

The feasibility of trace element supplementation for stable operation of wheat stillage-fed biogas tank reactors.

Science.gov (United States)

Gustavsson, J; Svensson, B H; Karlsson, A

2011-01-01

The aim of this study was to investigate the effect of trace element supplementation on operation of wheat stillage-fed biogas tank reactors. The stillage used was a residue from bio-ethanol production, containing high levels of sulfate. In biogas production, high sulfate content has been associated with poor process stability in terms of low methane production and accumulation of process intermediates. However, the results of the present study show that this problem can be overcome by trace element supplementations. Four lab-scale wheat stillage-fed biogas tank reactors were operated for 345 days at a hydraulic retention time of 20 days (37 degrees C). It was concluded that daily supplementation with Co (0.5 mg L(-1)), Ni (0.2 mg L(-1)) and Fe (0.5 g L(-1)) were required for maintaining process stability at the organic loading rate of 4.0 g volatile solids L(-1) day(-1).

Theoretical analysis of a biogas-fed PEMFC system with different hydrogen purifications: Conventional and membrane-based water gas shift processes

International Nuclear Information System (INIS)

Authayanun, Suthida; Aunsup, Pounyaporn; Patcharavorachot, Yaneeporn; Arpornwichanop, Amornchai

2014-01-01

Highlights: • Thermodynamic analysis of the biogas-fed PEMFC system is performed. • Conventional and membrane-based WGS processes for H 2 purification are studied. • A flowsheet model of the PEMFC system is developed. • Effect of key parameters on yields of H 2 and carbon in the biogas reformer is shown. • Performance of PEMFC systems with different H 2 purification processes is analyzed. - Abstract: This study presents a thermodynamic analysis of biogas reforming and proton electrolyte membrane fuel cell (PEMFC) integrated process with different hydrogen purifications: conventional and membrane-based water gas shift processes. The aim is to determine the optimal reforming process for hydrogen production from biogas in the PEMFC system. The formation of carbon is concerned in the hydrogen production. The simulation results show that increases in the steam-to-methane ratio and reformer temperature can improve the hydrogen yield and reduce the carbon formation. From the performance analysis, it is found that when the PEMFC is operated at high temperature and fuel utilization, the overall system efficiency enhances. The performance of the PEMFC system with the installation of a water gas shift membrane unit in the hydrogen purification step is slightly increased, compared with a conventional process

La riforma del FMI: alcune questioni organizzatIve e operative (Reforming the IMF: Some Organizational and Operational Issues. With English summary

Directory of Open Access Journals (Sweden)

Hossein Askari

2012-10-01

Full Text Available While financial crises during the 1990s have started a lively debate on IMF policies toward member countries, reform of the Fund's organizational structure and operations have been largely ignored. Improved organization and operations would increase IMF efficiency and membership participation, which would in turn increase IMF effectiveness in enhancing global economic conditions. In this paper, a number of such issues--quotas, voting structure and decision making; executive board and ministerial committees; management structure and staff; political dimensions, transparency and credibility--are assessed.  JEL Codes: F33Keywords: IMF

40 CFR Table 16 to Subpart Uuu of... - Operating Limits for Organic HAP Emissions From Catalytic Reforming Units

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Operating Limits for Organic HAP Emissions From Catalytic Reforming Units 16 Table 16 to Subpart UUU of Part 63 Protection of Environment..., Subpt. UUU, Table 16 Table 16 to Subpart UUU of Part 63—Operating Limits for Organic HAP Emissions From...

Development of ATSR (Auto Thermal Steam Reformer)

International Nuclear Information System (INIS)

Ono, J.; Yoshino, Y.; Kuwabara, T.; Fujisima, S.; Kobayashi, S.; Maruko, S.

2004-01-01

'Full text:' Auto-thermal reformers are used popularly for fuel cell vehicle because they are compact and can start up quickly. On the other hand, steam reformers are used for stationary fuel cell power plant because they are good thermal efficiency. While, there are many cases using the auto- thermal reformer for stationary use with expectation of cost reduction in USA, as well. However, they are still insufficient for its durability, compactness and cost. We have been developing the new type of fuel processing system that is auto-thermal steam reformer (ATSR), which is hybrid of a conventional steam reformer (STR) and a conventional auto-thermal reformer (ATR). In this study, some proto-type of ATSR for field test were designed, tried manufacturing and tested performance and durability. And we have tried to operate with fuel cell stack to evaluate the system interface performance, that is, operability and controllability. (author)

On direct internal methane steam reforming kinetics in operating solid oxide fuel cells with nickel-ceria anodes

Science.gov (United States)

Thallam Thattai, A.; van Biert, L.; Aravind, P. V.

2017-12-01

Major operating challenges remain to safely operate methane fuelled solid oxide fuel cells due to undesirable temperature gradients across the porous anode and carbon deposition. This article presents an experimental study on methane steam reforming (MSR) global kinetics for single operating SOFCs with Ni-GDC (gadolinium doped ceria) anodes for low steam to carbon (S/C) ratios and moderate current densities. The study points out the hitherto insufficient research on MSR global and intrinsic kinetics for operating SOFCs with complete Ni-ceria anodes. Further, it emphasizes the need to develop readily applicable global kinetic models as a subsequent step from previously reported state-of-art and complex intrinsic models. Two rate expressions of the Power law (PL) and Langmuir-Hinshelwood (LH) type have been compared and based on the analysis, limitations of using previously proposed rate expressions for Ni catalytic beds to study MSR kinetics for complete cermet anodes have been identified. Firstly, it has been shown that methane reforming on metallic (Ni) current collectors may not be always negligible, contrary to literature reports. Both PL and LH kinetic models predict significantly different local MSR reaction rate and species partial pressure distributions along the normalized reactor length, indicating a strong need for further experimental verifications.

Exergy Analysis of an Intermediate Temperature Solid Oxide Fuel Cell-Gas Turbine Hybrid System Fed with Ethanol

Directory of Open Access Journals (Sweden)

Fotini Tzorbatzoglou

2012-10-01

Full Text Available In the present work, an ethanol fed Solid Oxide Fuel Cell-Gas Turbine (SOFC-GT system has been parametrically analyzed in terms of exergy and compared with a single SOFC system. The solid oxide fuel cell was fed with hydrogen produced from ethanol steam reforming. The hydrogen utilization factor values were kept between 0.7 and 1. The SOFC’s Current-Volt performance was considered in the range of 0.1–3 A/cm2 at 0.9–0.3 V, respectively, and at the intermediate operating temperatures of 550 and 600 °C, respectively. The curves used represent experimental results obtained from the available bibliography. Results indicated that for low current density values the single SOFC system prevails over the SOFC-GT hybrid system in terms of exergy efficiency, while at higher current density values the latter is more efficient. It was found that as the value of the utilization factor increases the SOFC system becomes more efficient than the SOFC-GT system over a wider range of current density values. It was also revealed that at high current density values the increase of SOFC operation temperature leads in both cases to higher system efficiency values.

Toho Gas accepts the challenge of operational reform creation of an integrated OA environment

International Nuclear Information System (INIS)

Kato, Hisaatsu; Ito, Mari; Goto, Akihito

1997-01-01

Toho Gas Co., Ltd. is Japan's third largest city gas supplier. In response to changes in the industrial environment, the company began the Integrated OA Project in 1994 promoting use of information technology while reforming its systems and culture. We made a proposal to distribute one personal computer connected to a company-wide network to each office worker. In addition, we attached importance to the creation of a database, which can integrate all information systems with a flexible structure and also play a central role in end user computing. A data model for the entire company has been already made and implemented into some operational systems and data-warehouses. Furthermore, to reform our business we are offering incremental goals, including the first step such as achieving a paper less working environment with a little effort. This methodology has achieved a great success. In the near future, we will expand the infrastructure with mobile computers and implementation of a database. (au)

In-situ study of the gas-phase composition and temperature of an intermediate-temperature solid oxide fuel cell anode surface fed by reformate natural gas

Science.gov (United States)

Santoni, F.; Silva Mosqueda, D. M.; Pumiglia, D.; Viceconti, E.; Conti, B.; Boigues Muñoz, C.; Bosio, B.; Ulgiati, S.; McPhail, S. J.

2017-12-01

An innovative experimental setup is used for in-depth and in-operando characterization of solid oxide fuel cell anodic processes. This work focuses on the heterogeneous reactions taking place on a 121 cm2 anode-supported cell (ASC) running with a H2, CH4, CO2, CO and steam gas mixture as a fuel, using an operating temperature of 923 K. The results have been obtained by analyzing the gas composition and temperature profiles along the anode surface in different conditions: open circuit voltage (OCV) and under two different current densities, 165 mA cm-2 and 330 mA cm-2, corresponding to 27% and 54% of fuel utilization, respectively. The gas composition and temperature analysis results are consistent, allowing to monitor the evolution of the principal chemical and electrochemical reactions along the anode surface. A possible competition between CO2 and H2O in methane internal reforming is shown under OCV condition and low current density values, leading to two different types of methane reforming: Steam Reforming and Dry Reforming. Under a current load of 40 A, the dominance of exothermic reactions leads to a more marked increase of temperature in the portion of the cell close to the inlet revealing that current density is not uniform along the anode surface.

Numerical study of methanol–steam reforming and methanol–air catalytic combustion in annulus reactors for hydrogen production

International Nuclear Information System (INIS)

Chein, Reiyu; Chen, Yen-Cho; Chung, J.N.

2013-01-01

Highlights: ► Performance of mini-scale integrated annulus reactors for hydrogen production. ► Flow rates fed to combustor and reformer control the reactor performance. ► Optimum performance is found from balance of flow rates to combustor and reformer. ► Better performance can be found when shell side is designed as combustor. -- Abstract: This study presents the numerical simulation on the performance of mini-scale reactors for hydrogen production coupled with liquid methanol/water vaporizer, methanol/steam reformer, and methanol/air catalytic combustor. These reactors are designed similar to tube-and-shell heat exchangers. The combustor for heat supply is arranged as the tube or shell side. Based on the obtained results, the methanol/air flow rate through the combustor (in terms of gas hourly space velocity of combustor, GHSV-C) and the methanol/water feed rate to the reformer (in terms of gas hourly space velocity of reformer, GHSV-R) control the reactor performance. With higher GHSV-C and lower GHSV-R, higher methanol conversion can be achieved because of higher reaction temperature. However, hydrogen yield is reduced and the carbon monoxide concentration is increased due to the reversed water gas shift reaction. Optimum reactor performance is found using the balance between GHSV-C and GHSV-R. Because of more effective heat transfer characteristics in the vaporizer, it is found that the reactor with combustor arranged as the shell side has better performance compared with the reactor design having the combustor as the tube side under the same operating conditions.

Investigations on a new internally-heated tubular packed-bed methanol–steam reformer

KAUST Repository

Nehe, Prashant

2015-05-01

Small-scale reformers for hydrogen production through steam reforming of methanol can provide an alternative solution to the demand of continuous supply of hydrogen gas for the operation of Proton Exchange Membrane Fuel Cells (PEMFCs). A packed-bed type reformer is one of the potential designs for such purpose. An externally heated reformer has issues of adverse lower temperature in the core of the reformer and significant heat loss to the environment thus impacting its performance. Experimental and numerical studies on a new concept of internally heated tubular packed-bed methanol-steam reformer have been reported in this paper with improved performance in terms of higher methanol conversion and reduced heat losses to surroundings. CuO/ZnO/Al2O3 is used as the catalyst for the methanol-steam reforming reaction and a rod-type electric heater at the center of the reactor is used for supplying necessary heat for endothermic steam reforming reaction. The vaporizer and the reformer unit with a constant volume catalyst bed are integrated in the annular section of a tubular reformer unit. The performance of the reformer was investigated at various operating conditions like feed rate of water-methanol mixture, mass of the catalyst and reforming temperature. The experimental and numerical results show that the methanol conversion and CO concentration increase with internal heating for a wide range of operating conditions. The developed reformer unit generates 50-80W (based on lower heating value) of hydrogen gas for applications in PEMFCs. For optimized design and operating conditions, the reformer unit produced 298sccm reformed gas containing 70% H2, 27% CO2 and 3% CO at 200-240°C which can produce a power output of 25-32W assuming 60% fuel cell efficiency and 80% of hydrogen utilization in a PEMFC. © 2015 Hydrogen Energy Publications, LLC.

Poly-dimethylsiloxane (PDMS) based micro-reactors for steam reforming of methanol

Energy Technology Data Exchange (ETDEWEB)

Ha, Ji Won; Kundu, Arunabha; Jang, Jae Hyuk

2010-11-15

A miniaturized methanol steam reformer with a serpentine type of micro-channels was developed based on poly-dimethylsiloxane (PDMS) material. This way of fabricating micro-hydrogen generator is very simple and inexpensive. The volume of a PDMS micro-reformer is less than 10 cm{sup 3}. The catalyst used was a commercial Cu/ZnO/Al{sub 2}O{sub 3} reforming catalyst from Johnson Matthey. The Cu/ZnO/Al{sub 2}O{sub 3} reforming catalyst particles of mean diameter 50-70 {mu}m was packed into the micro-channels by injecting water based suspension of catalyst particles at the inlet point. The miniaturized PDMS micro-reformer was operated successfully in the operating temperatures of 180-240 C and 15%-75% molar methanol conversion was achieved in this temperature range for WHSV of 2.1-4.2 h{sup -1}. It was not possible to operate the micro-reformer made by pure PDMS at temperature beyond 240 C. Hybrid type of micro-reformer was fabricated by mixing PDMS and silica powder which allowed the operating temperature around 300 C. The complete conversion (99.5%) of methanol was achieved at 280 C in this case. The maximum reformate gas flow rate was 30 ml/min which can produce 1 W power at 0.6 V assuming hydrogen utilization of 60%. (author)

Experimental characterization and modeling of an ethanol steam reformer

DEFF Research Database (Denmark)

Mandø, Matthias; Bovo, Mirko; Nielsen, Mads Pagh

2006-01-01

This work describes the characterization of an ethanol reforming system for a high temperature PEM fuel cell system. High temperature PEM fuel cells are well suited for operation on reformate gas due to the superior CO tolerance compared with low temperature PEM. Steam reforming of liquid biofuels...

Energy efficiency of a direct-injection internal combustion engine with high-pressure methanol steam reforming

International Nuclear Information System (INIS)

Poran, Arnon; Tartakovsky, Leonid

2015-01-01

This article discusses the concept of a direct-injection ICE (internal combustion engine) with thermo-chemical recuperation realized through SRM (steam reforming of methanol). It is shown that the energy required to compress the reformate gas prior to its injection into the cylinder is substantial and has to be accounted for. Results of the analysis prove that the method of reformate direct-injection is unviable when the reforming is carried-out under atmospheric pressure. To reduce the energy penalty resulted from the gas compression, it is suggested to implement a high-pressure reforming process. Effects of the injection timing and the injector's flow area on the ICE-SRM system's fuel conversion efficiency are studied. The significance of cooling the reforming products prior to their injection into the engine-cylinder is demonstrated. We show that a direct-injection ICE with high-pressure SRM is feasible and provides a potential for significant efficiency improvement. Development of injectors with greater flow area shall contribute to further efficiency improvements. - Highlights: • Energy needed to compress the reformate is substantial and has to be accounted for. • Reformate direct-injection is unviable if reforming is done at atmospheric pressure. • Direct-injection engine with high-pressure methanol reforming is feasible. • Efficiency improvement by 12–14% compared with a gasoline-fed engine was shown

Working on reform. How workers' compensation medical care is affected by health care reform.

Science.gov (United States)

Himmelstein, J; Rest, K

1996-01-01

The medical component of workers' compensation programs-now costing over $24 billion annually-and the rest of the nation's medical care system are linked. They share the same patients and providers. They provide similar benefits and services. And they struggle over who should pay for what. Clearly, health care reform and restructuring will have a major impact on the operation and expenditures of the workers' compensation system. For a brief period, during the 1994 national health care reform debate, these two systems were part of the same federal policy development and legislative process. With comprehensive health care reform no longer on the horizon, states now are tackling both workers' compensation and medical system reforms on their own. This paper reviews the major issues federal and state policy makers face as they consider reforms affecting the relationship between workers' compensation and traditional health insurance. What is the relationship of the workers' compensation cost crisis to that in general health care? What strategies are being considered by states involved in reforming the medical component of workers compensation? What are the major policy implications of these strategies?

FED-A, an advanced performance FED based on low safety factor and current drive

International Nuclear Information System (INIS)

Peng, Y.K.M.; Rutherford, P.H.

1983-08-01

The FED-A study aims to quantify the potential improvement in cost-effectiveness of the Fusion Engineering Device (FED) by assuming low safety factor q (less than 2 as opposed to about 3) at the plasma edge and noninductive current drive (as opposed to only inductive current drive). The FED-A performance objectives are set to be : (1) ignition assuming International Tokamak Reactor (INTOR) plamsa confinement scaling, but still achieving a fusion power amplification Q greater than or equal to 5 when the confinement is degraded by a factor of 2; (2) neutron wall loading of about 1 MW/m 2 , with 0.5 MW/m 2 as a conservative lower bound; and (3) more clearly power-reactor-like operations, such as steady state

Preparation and characterization of the perovskite catalysts : activity studies for diesel surrogate (dodecane) reforming

Energy Technology Data Exchange (ETDEWEB)

Kondakindi, R.; Kundu, A.; Karan, K.; Peppley, B. [Queen' s-RMC Fuel Cell Research Centre, Kingston, ON (Canada)

2009-07-01

Canada's northern communities rely on diesel fuel for generating electricity. The process of converting diesel to electricity in internal combustion engines is not efficient and generates significant amounts of unwanted products. This paper presented an alternative process whereby diesel is reformed into hydrogen-rich reformate which can then be fed to a solid oxide fuel cell. This alternative process converts energy more efficiently and eliminates the formation of nitrogen oxides (NOx) and soot. This study focused on the development of LaFeO{sub 3} based perovskite catalysts for diesel reforming. The activity of the perovskite catalysts was assessed for steam reforming of dodecane, a surrogate for diesel. In order to study the effect on catalytic activity, various perovskite materials were prepared by doping the perovskite at A-site to minimize the coke deposition and at B-site to improve the activity. Preliminary results for dodecane reforming for selected perovskites were promising. Additional testing is underway regarding catalyst activity and stability studies as well carbon and sulphur poisoning.

Vapor-fed bio-hybrid fuel cell.

Science.gov (United States)

Benyamin, Marcus S; Jahnke, Justin P; Mackie, David M

2017-01-01

Concentration and purification of ethanol and other biofuels from fermentations are energy-intensive processes, with amplified costs at smaller scales. To circumvent the need for these processes, and to potentially reduce transportation costs as well, we have previously investigated bio-hybrid fuel cells (FCs), in which a fermentation and FC are closely coupled. However, long-term operation requires strictly preventing the fermentation and FC from harming each other. We introduce here the concept of the vapor-fed bio-hybrid FC as a means of continuously extracting power from ongoing fermentations at ambient conditions. By bubbling a carrier gas (N 2 ) through a yeast fermentation and then through a direct ethanol FC, we protect the FC anode from the catalyst poisons in the fermentation (which are non-volatile), and also protect the yeast from harmful FC products (notably acetic acid) and from build-up of ethanol. Since vapor-fed direct ethanol FCs at ambient conditions have never been systematically characterized (in contrast to vapor-fed direct methanol FCs), we first assess the effects on output power and conversion efficiency of ethanol concentration, vapor flow rate, and FC voltage. The results fit a continuous stirred-tank reactor model. Over a wide range of ethanol partial pressures (2-8 mmHg), power densities are comparable to those for liquid-fed direct ethanol FCs at the same temperature, with power densities >2 mW/cm 2 obtained. We then demonstrate the continuous operation of a vapor-fed bio-hybrid FC with fermentation for 5 months, with no indication of performance degradation due to poisoning (of either the FC or the fermentation). It is further shown that the system is stable, recovering quickly from disturbances or from interruptions in maintenance. The vapor-fed bio-hybrid FC enables extraction of power from dilute bio-ethanol streams without costly concentration and purification steps. The concept should be scalable to both large and small

2D heat and mass transfer modeling of methane steam reforming for hydrogen production in a compact reformer

International Nuclear Information System (INIS)

Ni Meng

2013-01-01

Highlights: ► A heat and mass transfer model is developed for a compact reformer. ► Hydrogen production from methane steam reforming is simulated. ► Increasing temperature greatly increases the reaction rates at the inlet. ► Temperature in the downstream is increased at higher rate of heat supply. ► Larger permeability enhances gas flow and reaction rates in the catalyst layer. - Abstract: Compact reformers (CRs) are promising devices for efficient fuel processing. In CRs, a thin solid plate is sandwiched between two catalyst layers to enable efficient heat transfer from combustion duct to the reforming duct for fuel processing. In this study, a 2D heat and mass transfer model is developed to investigate the fundamental transport phenomenon and chemical reaction kinetics in a CR for hydrogen production by methane steam reforming (MSR). Both MSR reaction and water gas shift reaction (WGSR) are considered in the numerical model. Parametric simulations are performed to examine the effects of various structural/operating parameters, such as pore size, permeability, gas velocity, temperature, and rate of heat supply on the reformer performance. It is found that the reaction rates of MSR and WGSR are the highest at the inlet but decrease significantly along the reformer. Increasing the operating temperature raises the reaction rates at the inlet but shows very small influence in the downstream. For comparison, increasing the rate of heat supply raises the reaction rates in the downstream due to increased temperature. A high gas velocity and permeability facilitates gas transport in the porous structure thus enhances reaction rates in the downstream of the reformer.

Steam reforming of methane over Pt/Rh based wire mesh catalyst in single channel reformer for small scale syngas production

DEFF Research Database (Denmark)

Sigurdsson, Haftor Örn; Kær, Søren Knudsen

2012-01-01

of a catalytic parallel plate type heat exchanger (CPHE) reformer stack, where coated Pt/Rh based wire mesh is used as a catalyst. Heat is supplied to the endothermic reaction with infrared electric heaters. All the experiments were performed under atmospheric pressure and at stable operating conditions......The purpose of this study is to investigate a small scale steam methane reformer for syngas production for a micro combined heat and power (mCPH) unit under different operational conditions. The study presents an experimental analysis of the performance of a specially built single channel...... to evaluate the effect of flow maldistribution in a CPHE reformer stack on the CH4 conversion and H2 yield....

Energy Analysis in Combined Reforming of Propane

Directory of Open Access Journals (Sweden)

K. Moon

2013-01-01

Full Text Available Combined (steam and CO2 reforming is one of the methods to produce syngas for different applications. An energy requirement analysis of steam reforming to dry reforming with intermediate steps of steam reduction and equivalent CO2 addition to the feed fuel for syngas generation has been done to identify condition for optimum process operation. Thermodynamic equilibrium data for combined reforming was generated for temperature range of 400–1000°C at 1 bar pressure and combined oxidant (CO2 + H2O stream to propane (fuel ratio of 3, 6, and 9 by employing the Gibbs free energy minimization algorithm of HSC Chemistry software 5.1. Total energy requirement including preheating and reaction enthalpy calculations were done using the equilibrium product composition. Carbon and methane formation was significantly reduced in combined reforming than pure dry reforming, while the energy requirements were lower than pure steam reforming. Temperatures of minimum energy requirement were found in the data analysis of combined reforming which were optimum for the process.

From Fed-batch to Continuous Enzymatic Biodiesel Production

DEFF Research Database (Denmark)

Price, Jason Anthony; Nordblad, Mathias; Woodley, John M.

2015-01-01

In this this paper, we use mechanistic modelling to guide the development of acontinuous enzymatic process that is performed as a fed-batch operation. In this workwe use the enzymatic biodiesel process as a case study. A mechanistic model developedin our previous work was used to determine...... measured components (triglycerides, diglycerides, monoglycerides, free fatty acid and fatty acid methyl esters(biodiesel)) much better than using fed-batch data alone given the smaller residuals. We also observe a reduction in the correlation between the parameters.The model was then used to predict that 5...... reactors are required (with a combined residence time of 30 hours) to reach a final biodiesel concentration within 2 % of the95.6 mass % achieved in a fed-batch operation, for 24 hours....

Dual-Electrical-Port Control of Cascaded Doubly-Fed Induction Machine for EV/HEV Applications

DEFF Research Database (Denmark)

Han, Peng; Cheng, Ming; Chen, Zhe

2017-01-01

that of the power machine in singly-fed operation mode, and only a half of that of the power machine in doubly-fed operation mode, which shows the urgent need for torque density enhancement of brushless doubly-fed machines for electric vehicle/hybrid electric vehicle applications. Computer simulations...

Workplace protection of air-fed visors used in paint spraying operations.

Science.gov (United States)

Bolsover, J; Rajan-Sithamparanadarajah, B; Vaughan, N

2006-04-01

Air-fed visors are commonly used for protection against exposure to airborne isocyanates during paint spraying. Protection levels for this class of equipment are theoretically adequate, yet isocyanate sensitization in this occupation still occurs. The work reported here set out to establish the level of respiratory protection that is achieved during real paint spraying activities when air-fed visors are used. The work also examined the effects of reduced air supply flow rates on this type of respiratory protection. The workplace study highlighted common problems that occur when attempting to measure protection factors, and process and interpret the collected data. Many of the environments included in this study did not exhibit challenge concentrations high enough to reliably measure the workplace protection factor of this class of device. When detection limits are taken into consideration, the remaining field data suggest that an assigned protection factor in the region of 40 may be appropriate. When well maintained and used in accordance with the manufacturer's instructions, air-fed visors are capable of providing a good level of respiratory protection. The protection given by air-fed visors is strongly dependent on the air flow supplied to them. Laboratory measurements demonstrate that protection falls as the air supply falls. This is a gradual process and does not suddenly occur at any particular air supply flow. Observations made during the field tests indicate that there may be other activities associated with the spraying process that need to be taken into consideration when looking for sources of respiratory sensitization.

Experimental analysis of an autothermal reformer for automotive purposes

International Nuclear Information System (INIS)

Caners, C.; Peppley, B.; Harrison, S.; Oosthuizen, P.

2004-01-01

This paper describes the experimental analysis, concomitant with modeling research, to determine improved operating parameters and design of an autothermal reformer. The reformer, utilizing both partial oxidation and steam reforming reactions, along with the water gas shift phenomena is well suited for the mobile application of transportation. This is due to the novel geometry of the autothermal reformer, which seeks to improve the heat transfer characteristics of the process, whereby the exothermic partial oxidation reaction provides the heat energy required to drive the steam reforming reaction, to the point of a thermally neutral system. The paper will present data from the experimental results of reforming iso-octane as a surrogate for gasoline in the form of reformate composition, iso-octane conversion percentages and efficiencies in terms of hydrogen realized per mol of fuel input. (author)

Characterization and Modeling of a Methanol Reforming Fuel Cell System

DEFF Research Database (Denmark)

Sahlin, Simon Lennart

topologies is the Reformed Methanol Fuel Cell (RMFC) system that operates on a mix of methanol and water. The fuel is reformed with a steam reforming to a hydrogen rich gas, however with additional formation of Carbon Monoxide and Carbon Dioxide. High Temperature Polymer Electrolyte Membrane Fuel Cell (HT...... to heat up the steam reforming process. However, utilizing the excess hydrogen in the system complicates the RMFC system as the amount of hydrogen can vary depending on the fuel methanol supply, fuel cell load and the reformer gas composition. This PhD study has therefore been involved in investigating......Many fuel cells systems today are operated with compressed hydrogen which has great benefits because of the purity of the hydrogen and the relatively simple storage of the fuel. However, compressed hydrogen is stored in the range of 800 bar, which can be expensive to compress.One of the interesting...

Reforming technology for syngas production

International Nuclear Information System (INIS)

Epstein, M.

1997-01-01

Methane forming reactions using either steam or CO 2 have been known to industry for a long time. These endothermic reactions require the investment of a relatively large amount of energy. German researchers, in the 1970's, conceived and developed the idea to use this reaction and the reverse methanation reaction in a closed loop for the transportation and distribution of nuclear heat. The idea was also adopted for use with solar energy as a heat source. Utilizing solar energy as the heat source, the Weismann Institute of Science has fabricated, installed and operated a complete loop capable of the conversion and transportation of over 400 kW of heat. This system can be operated with a wide range of CO 2 /H 2 O/CH 4 feed mixtures. Steam reforming is the common reforming reaction in the ''open loop'' mode for the purpose of synthesis gas production. This is accomplished with a large excess of steam on a nickel catalyst. However, it has only recently been recognized that there is also a substantial market for CO 2 reforming. The CO 2 /CH 4 mixture in various proportions exists in many places and has, so far, not been used efficiently. The sources for this mixture are biogas produced in anaerobic digestion processes and gas resources such as the NATUNA gas field in Indonesia, and many others. Therefore, the system of CO 2 /CH 4 deserves more attention. Commercial catalysts used for steam reforming based on nickel are not suitable for this system. Therefore, other catalysts based on Rhodium and Ruthenium have been developed and some performance data is presented in this paper. Also presented is a conceptual schematic layout of a CO 2 reforming plant and matching methanator. A computer code for a detailed design of the entire loop in a commercial size system has been prepared where optimized operational conditions as well as equipment parameters can be determined. (author). 3 figs, 3 tabs

Hydrogen production from biomass pyrolysis gas via high temperature steam reforming process

International Nuclear Information System (INIS)

Wongchang, Thawatchai; Patumsawad, Suthum

2010-01-01

Full text: The aim of this work has been undertaken as part of the design of continuous hydrogen production using the high temperature steam reforming process. The steady-state test condition was carried out using syngas from biomass pyrolysis, whilst operating at high temperatures between 600 and 1200 degree Celsius. The main reformer operating parameters (e.g. temperature, resident time and steam to biomass ratio (S/B)) have been examined in order to optimize the performance of the reformer. The operating temperature is a key factor in determining the extent to which hydrogen production is increased at higher temperatures (900 -1200 degree Celsius) whilst maintaining the same as resident time and S/B ratio. The effects of exhaust gas composition on heating value were also investigated. The steam reforming process produced methane (CH 4 ) and ethylene (C 2 H 4 ) between 600 to 800 degree Celsius and enhanced production ethane (C 2 H 6 ) at 700 degree Celsius. However carbon monoxide (CO) emission was slightly increased for higher temperatures all conditions. The results show that the use of biomass pyrolysis gas can produce higher hydrogen production from high temperature steam reforming. In addition the increasing reformer efficiency needs to be optimized for different operating conditions. (author)

Operating Regions of Adjustable-Speed Units with Doubly Fed Machines

Czech Academy of Sciences Publication Activity Database

Schreier, Luděk; Chomát, Miroslav; Bendl, Jiří

2004-01-01

Roč. 49, č. 2 (2004), s. 119-136 ISSN 0001-7043 R&D Projects: GA AV ČR IAA2057102 Keywords : AC machines * adjustable-speed systems * doubly fed machine Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering

Impact of cell design and operating conditions on the performances of SOFC fuelled with methane

Science.gov (United States)

Laurencin, J.; Lefebvre-Joud, F.; Delette, G.

An in-house-model has been developed to study the thermal and electrochemical behaviour of a planar SOFC fed directly with methane and incorporated in a boiler. The usual Ni-YSZ cermet has been considered for the anode material. It has been found that methane reforming into hydrogen occurs only at the cell inlet in a limited depth within the anode. A sensitivity analysis has allowed establishing that anode thicknesses higher than ∼400-500 μm are required to achieve both the optimal methane conversion and electrochemical performances. The direct internal reforming (DIR) mechanisms and the impact of operating conditions on temperature gradients and SOFC electrical efficiencies have been investigated considering the anode supported cell configuration. It has been shown that the temperature gradient is minimised in the autothermal mode of cell operation. Thermal equilibrium in the stack has been found to be strongly dependent on radiative heat losses with the stack envelope. Electrochemical performance and cell temperature maps have been established as a function of methane flow rates and cell voltages.

Carbonaceous deposits on naptha reforming catalysts

International Nuclear Information System (INIS)

Redwan, D.S.

1999-01-01

Carbonaceous deposits on naphtha reforming catalysts play a decisive role in limiting process performance. The deposits negatively after catalyst activity, selectivity and the production cycle of a semi regenerative reformer. The magnitude of negative effect of those deposits is directly proportional to their amounts and complexity. Investigations on used reforming catalysts samples reveal that the amount and type (complexity of the chemical nature) of carbonaceous deposits are directly proportional to the catalysts life on stream and the severity of operating conditions. In addition, the combustibility behavior of carbonaceous deposits on the catalyst samples taken from different reformers are found to be different. Optimal carbon removal, for in situ catalyst regeneration, requires the specific conditions be developed, based on the results of well designed and properly performed investigations of the amount and type of carbonaceous deposits. (author)

Hydrogen production from formic acid in pH-stat fed-batch operation for direct supply to fuel cell.

Science.gov (United States)

Shin, Jong-Hwan; Yoon, Jong Hyun; Lee, Seung Hoon; Park, Tai Hyun

2010-01-01

Enterobacter asburiae SNU-1 harvested after cultivation was used as a whole cell biocatalyst, for the production of hydrogen. Formic acid was efficiently converted to hydrogen using the harvested cells with an initial hydrogen production rate and total hydrogen production of 491 ml/l/h and 6668 ml/l, respectively, when 1 g/l of whole cell enzyme was used. Moreover, new pH-stat fed-batch operation was conducted, and total hydrogen production was 1.4 times higher than that of batch operation. For practical application, bio-hydrogen produced from formic acid using harvested cells was directly applied to PEMFC for power generation.

Dynamic model with experimental validation of a biogas-fed SOFC plant

International Nuclear Information System (INIS)

D'Andrea, G.; Gandiglio, M.; Lanzini, A.; Santarelli, M.

2017-01-01

Highlights: • 60% of DIR into the SOFC anode reduces the air blower parasitic losses by 14%. • PID-controlled cathode airflow enables fast thermal regulation of the SOFC. • Stack overheating occurs due to unexpected reductions in the cathode airflow. • Current ramp rates higher than +0.30 A/min lead to an excessive stack overheating. - Abstract: The dynamic model of a poly-generation system based on a biogas-fed solid oxide fuel cell (SOFC) plant is presented in this paper. The poly-generation plant was developed in the framework of the FP7 EU-funded project SOFCOM ( (www.sofcom.eu)), which consists of a fuel-cell based polygeneration plant with CO_2 capture and re-use. CO_2 is recovered from the anode exhaust of the SOFC (after oxy-combustion, cooling and water condensation) and the Carbon is fixed in the form of micro-algae in a tubular photobioreactor. This work focuses on the dynamic operation of the SOFC module running on steam-reformed biogas. Both steady state and dynamic operation of the fuel cell stack and the related Balance-of-Plant (BoP) has been modeled in order to simulate the thermal behavior and performance of the system. The model was validated against experimental data gathered during the operation of the SOFCOM proof-of-concept showing good agreement with the experimental data. The validated model has been used to investigate further on the harsh off-design operation of the proof-of-concept. Simulation results provide guidelines for an improved design of the control system of the plant, highlighting the feasible operating region under safe conditions and means to maximize the overall system efficiency.

Effect of mode of operation on hydrogen production from glycerol at thermal neutral conditions: Thermodynamic analysis

Energy Technology Data Exchange (ETDEWEB)

Pairojpiriyakul, Thirasak; Soottitantawat, Apinan; Arpornwichanop, Amornchai; Assabumrungrat, Suttichai [Department of Chemical Engineering, Faculty of Engineering, Chulalongkorn University (Thailand); Kiatkittipong, Worapon [Department of Chemical Engineering, Faculty of Engineering and Industrial Technology, Silpakorn University (Thailand); Wiyaratn, Wisitsree [Department of Production Technology Education, Faculty of Industrial Education and Technology, King Mongkut' s University of Technology Thonburi (Thailand); Laosiripojana, Navadol [The Joint Graduate School of Energy and Environment, King Mongkut' s University of Technology Thonburi (Thailand); Croiset, Eric [Department of Chemical Engineering, University of Waterloo (Canada)

2010-10-15

Thermodynamic analysis of hydrogen production from glycerol under thermal neutral conditions is studied in this work. Heat requirement from the process can be achieved from the exothermic reaction of glycerol with oxygen in air fed to the system. Two modes of operation for air feeding are considered including (i) Single-feed mode in which air is fed in combination with water and glycerol to the reformer, and (ii) Split-feed mode in which air and part of glycerol is fed to a combustor in order to generate heat. The thermal neutral conditions are considered for two levels including Reformer and System levels. It was found that the H{sub 2} yield from both modes is not significantly different at the Reformer level. In contrast, the difference becomes more pronounced at the System level. Single-feed and Split-feed modes offer high H{sub 2} yield in low (600-900 K) and high (900-1200 K) temperature ranges, respectively. The maximum H{sub 2} yields are 5.67 (water to glycerol ratio, WGR = 12, oxygen to glycerol ratio, OGR = 0.37, T = 900 K, Split-feed mode), and 3.28 (WGR = 3, OGR = 1.40, T = 900 K, Single-feed mode), for the Reformer and System levels, respectively. The difference between H{sub 2} yields in both levels mainly arises from the huge heat demand for preheating feeds in the System level, and therefore, a higher amount of air is needed to achieve the thermal neutral condition. Split-feed mode is a favorable choice in term of H{sub 2} purity because the gas product is not diluted with N{sub 2} from the air. The use of pure O{sub 2} and afterburner products (ABP) stream were also considered at the System level. The maximum H{sub 2} yield becomes 3.75 (WGR = 5.21, OGR = 1.28, T = 900 K, Split-feed mode) at thermal neutral condition when utilizing heat from the ABP stream. Finally comparisons between the different modes and levels are addressed in terms of yield of by-products, and carbon formation. (author)

Tax reform Ukraine: implementation mechanisms and consequences

Directory of Open Access Journals (Sweden)

J.Lebedzevіch

2015-06-01

Full Text Available In the article the main shortcomings of the existing domestic tax systems, which were the main reasons for the need for its reform in the context of integration into the European Community. Determined the first stage of reforming tax systems Ukraine, which is associated with the adoption of the Law of Ukraine «On Amendments to the Tax Code of Ukraine and laws of Ukraine». The main provisions of this legal act, revealing the essence of the mechanism for implementing tax reform. Analyzed the mechanism of implementation of tax reform by analyzing the major innovations of the Tax Code of Ukraine and their comparison with the tax «standards» that operated the implementation of tax reform 2015. Thesis there is determined a number of tax loopholes and nedoopratsyuvan conducted tax reform and their implications for payers of taxes and duties, and the need for further research and improvement. The experience of European countries towards the introduction of electronic filing and processing of tax returns.

Tokamak-FED plasma-engineering assessments

International Nuclear Information System (INIS)

Peng, Y.K.M.; Lyon, J.F.; Rutherford, P.H.

1981-01-01

A wide range of plasma assumptions and scenarios has been examined for the current US tokamak FED concept, which aims to provide a controlled, long pulse (approx. 100 s) burning plasma with an energy amplification of greater than or equal to 5, a fusion power of 180 MW, and a neutron wall load of greater than or equal to 0.4 MW/m 2 . The results of the assessment suggest that the current FED baseline parameters of R = 5.0 m, B/sub t/ = 3.6 T, a = 1.3 m, b = 2.1 m (D-shape), and I/sub p/ = 5.4 MA are appropriate in reaching the above plasma performance, despite uncertainties in several plasma physics areas, such as confinement scaling, achievable beta, impurity control, etc. To enhance the probability of achieving fusion ignition and to provide some margin against a short fall in our physics projections in FED, a limited operating capability at B/sub t/ = 4.6 T and I/sub p/ = 6.5 MA is incorporated. Various other options and remedies have also been assessed aiming to alleviate the impact of the uncertainties on the FED design concept. These approaches appear promising because they can be studied within the current fusion physics program and may lead to drastically more cost-effective FED concepts

The sex reform movement and eugenics in interwar Poland.

Science.gov (United States)

Gawin, Magdalena

2008-06-01

This paper focuses on the relations between a liberal group of sex reformers, consisting of writers and literary critics, and physicians from the Polish Eugenics Society in interwar Poland. It illustrates the paradoxes of the mutual co-operation between these two groups during the 1930s and analyses the reason why compulsory sterilisation was rejected by politicians. From the early 1930s two movements began to forge an alliance in Poland: the sexual reform movement which advocated freedom of the individual, and eugenics, which called for limiting the freedom of the individual for the collective good. This paper draws attention to several issues which emerged as part of this collaboration: population politics, the relationship between reformers, eugenicists and state institutions, and the question of how both movements--eugenics and sexual reform--perceived the question of sexuality, birth control and abortion. It will also focus on those aspects of their thinking that led to mutual co-operation.

Solar central receiver reformer system for ammonia plants

Science.gov (United States)

1980-07-01

An overview of a study to retrofit the Valley Nitrogen Producers, Inc., El Centro, California 600 ST/SD Ammonia Plant with Solar Central Receiver Technology is presented. The retrofit system consists of a solar central receiver reformer (SCRR) operating in parallel with the existing fossil fired reformer. Steam and hydrocarbon react in the catalyst filled tubes of the inner cavity receiver to form a hydrogen rich mixture which is the syngas feed for the ammonia production. The SCRR system will displace natural gas presently used in the fossil reformer combustion chamber.

Ownership Structure Reform and Bank Performance in Nigeria | Ani ...

African Journals Online (AJOL)

Nigeria undertook a major bank structure reform between 2004 and 2006. A pivotal plank of that reform was the pegging of government ownership in deposit money banks to 10%. This was informed by the general economic theory that state ownership in commercial undertakings hurts operating performance. This paper ...

A study on naphtha catalytic reforming reactor simulation and analysis.

Science.gov (United States)

Liang, Ke-min; Guo, Hai-yan; Pan, Shi-wei

2005-06-01

A naphtha catalytic reforming unit with four reactors in series is analyzed. A physical model is proposed to describe the catalytic reforming radial flow reactor. Kinetics and thermodynamics equations are selected to describe the naphtha catalytic reforming reactions characteristics based on idealizing the complex naphtha mixture by representing the paraffin, naphthene, and aromatic groups by single compounds. The simulation results based above models agree very well with actual operation unit data.

A study on naphtha catalytic reforming reactor simulation and analysis

OpenAIRE

Liang, Ke-min; Guo, Hai-yan; Pan, Shi-wei

2005-01-01

A naphtha catalytic reforming unit with four reactors in series is analyzed. A physical model is proposed to describe the catalytic reforming radial flow reactor. Kinetics and thermodynamics equations are selected to describe the naphtha catalytic reforming reactions characteristics based on idealizing the complex naphtha mixture by representing the paraffin, naphthene, and aromatic groups by single compounds. The simulation results based above models agree very well with actual operation uni...

Demonstration of direct internal reforming for MCFC power plants

Energy Technology Data Exchange (ETDEWEB)

Aasberg-Petersen, K.; Christensen, P.S.; Winther, S.K. [HALDOR TOPSOE A/S, Lynby (Denmark)] [and others

1996-12-31

The conversion of methane into hydrogen for an MCFC by steam reforming is accomplished either externally or internally in the stack. In the case of external reforming the plant electrical efficiency is 5% abs. lower mainly because more parasitic power is required for air compression for stack cooling. Furthermore, heat produced in the stack must be transferred to the external reformer to drive the endothermic steam reforming reaction giving a more complex plant lay-out. A more suitable and cost effective approach is to use internal steam reforming of methane. Internal reforming may be accomplished either by Indirect Internal Reforming (DIR) and Direct Internal Reforming (DIR) in series or by DIR-only as illustrated. To avoid carbon formation in the anode compartment higher hydrocarbons in the feedstock are converted into hydrogen, methane and carbon oxides by reaction with steam in ail adiabatic prereformer upstream the fuel cell stack. This paper discusses key elements of the desire of both types of internal reforming and presents data from pilot plants with a combined total of more than 10,000 operating hours. The project is being carried out as part of the activities of the European MCFC Consortium ARGE.

Turning Lightning into Electricity: Organizing Parents for Education Reform

Science.gov (United States)

Kelly, Andrew P.

2014-01-01

Families are the primary clients of public schools, but they are one of many constituencies who have a say in how schools actually operate. In all the technocratic fervor around "education reform"--the broad effort to implement standards and accountability, reform teacher tenure and evaluation, and increase parental choice--it is easy to…

Steam reforming of heptane in a fluidized bed membrane reactor

Science.gov (United States)

Rakib, Mohammad A.; Grace, John R.; Lim, C. Jim; Elnashaie, Said S. E. H.

n-Heptane served as a model compound to study steam reforming of naphtha as an alternative feedstock to natural gas for production of pure hydrogen in a fluidized bed membrane reactor. Selective removal of hydrogen using Pd 77Ag 23 membrane panels shifted the equilibrium-limited reactions to greater conversion of the hydrocarbons and lower yields of methane, an intermediate product. Experiments were conducted with no membranes, with one membrane panel, and with six panels along the height of the reactor to understand the performance improvement due to hydrogen removal in a reactor where catalyst particles were fluidized. Results indicate that a fluidized bed membrane reactor (FBMR) can provide a compact reformer for pure hydrogen production from a liquid hydrocarbon feedstock at moderate temperatures (475-550 °C). Under the experimental conditions investigated, the maximum achieved yield of pure hydrogen was 14.7 moles of pure hydrogen per mole of heptane fed.

Steam hydrocarbon cracking and reforming

NARCIS (Netherlands)

Golombok, M.

2004-01-01

Many industrial chemical processes are taught as distinct contrasting reactions when in fact the unifying comparisons are greater than the contrasts. We examine steam hydrocarbon reforming and steam hydrocarbon cracking as an example of two processes that operate under different chemical reactivity

The future direction of electricity reform in APEC economies

International Nuclear Information System (INIS)

Pritchard, Robert

2005-01-01

A 2003 study of Electricity Supply Industry (ESI) reform experience in the 21 Asia-Pacific Economic Cooperation (APEC) economies emphasised that the overriding principle of ESI reform must be to maintain the security and stability of the entire power system. This is what differentiates ESI reform from reform of other industries. For all economies, particularly developing economies, attracting private investment in the ESI is a vital ongoing need. However, since the mid-1990s, private investors have become more risk-averse. Today, it is less safe for governments to assume that their 'reformed' electricity sectors will attract the requisite level of private investment. The APEC study found that competitive electricity markets are unsuited to developing economies in the early stages of reform. However, enterprise level reforms can produce major gains by commercialising and corporatising electricity utilities and by providing them with economic incentives to operate to high technical and commercial standards. The APEC study also emphasised that governments must remain responsible for the outcomes of ESI reform irrespective of any changes in industry structure and ownership. This is a fundamental responsibility which cannot be left to a regulator. (Author)

Novel Auto thermal Reforming Process for Pure Hydrogen Production

International Nuclear Information System (INIS)

Chen, Z.; Elnashaie, S.S.E.H.

2004-01-01

Steam reforming of heptane for hydrogen production is investigated in a novel Circulating Fluidized Bed Membrane Reformer-Regenerator system (CFBMRR) utilizing a number of hydrogen and oxygen selective membranes. It is shown that although the amount of carbon deposition is significant, the effect on catalyst deactivation is negligible due to the large solid to gas mass feed ratio and the continuous catalyst regeneration in the system. The combustion of the deposited carbon in the catalyst regenerator supplies the heat needed for the endothermic steam reforming as well as the combustion of flammable gases from the riser reformer. Auto thermal operation is achievable for the entire adiabatic reformer-regenerator system when the exothermic heat generated from the regenerator is sufficient to compensate the endothermic heat consumed in the reformer. Multiplicity of the steady states exists in the range of steam to carbon feed ratio of 1.4442.251 mol/mol. The novel configuration has the potential advantages not only with respect to hydrogen production but also energy minimization

Simulation and calculation of three-reactor system of catalytic reforming

International Nuclear Information System (INIS)

Rikalovska, Tatjana; Markovska, Liljana; Meshko, Vera; Poposka, Filimena

1999-01-01

The process of catalytic reforming has been operated for quite a long time, one can not always find real data for the kinetics and thermodynamics of the reactions that take place during the catalytic reforming process in order to facilitate the designing of reactor system or its simulation in a wide:ran e of process parameters. Kinetic and thermodynamic data have been collected for the reactions that take place during the catalytic reforming process. The stress has been pointed on four major reactions: dehydrogenation of naphthenes (aromatization), dehydrocyclization of paraffins and hydrocracking of naphthenes and paraffins. On the base of such a kinetic model, the reforming process has been described with a system of differential equations. For the purpose of solving these equations computer programs for simulation of a three-reactor system for adiabatic operation of the reactors. The computer simulation of the mathematical model of this three-reactor system has been accomplished by use of the ISIM-dynamic simulator. The results obtained out of the simulation agree very good with the data of the real process of catalytic reforming in OKTA Crude Oil Refinery in Skopje, Macedonia. (Author)

Plasma-catalytic reforming of liquid hydrocarbons

International Nuclear Information System (INIS)

Nedybaliuk, O.A.; Chernyak, V.Ya; Kolgan, V.V.; Iukhymenko, V.V.; Solomenko, O.V.; Fedirchyk, I.I.; Martysh, E.V.; Demchina, V.P.; Klochok, N.V.; Dragnev, S.V.

2015-01-01

The series of experiments studying the plasma-catalytic reforming of liquid hydrocarbons was carried out. The dynamic plasma-liquid system based on a low-power rotating gliding arc with solid electrodes was used for the investigation of liquid hydrocarbons reforming process. Conversion was done via partial oxidation. A part of oxidant flow was activated by the discharge. Synthesis-gas composition was analysed by means of mass-spectrometry and gas-chromatography. A standard boiler, which operates on natural gas and LPG, was used for the burning of synthesis-gas

High temperature nuclear heat for isothermal reformer

International Nuclear Information System (INIS)

Epstein, M.

2000-01-01

High temperature nuclear heat can be used to operate a reformer with various feedstock materials. The product synthesis gas can be used not only as a source for hydrogen and as a feedstock for many essential chemical industries, such as ammonia and other products, but also for methanol and synthetic fuels. It can also be burnt directly in a combustion chamber of a gas turbine in an efficient combined cycle and generate electricity. In addition, it can be used as fuel for fuel cells. The reforming reaction is endothermic and the contribution of the nuclear energy to the calorific value of the final product (synthesis gas) is about 25%, compared to the calorific value of the feedstock reactants. If the feedstock is from fossil origin, the nuclear energy contributes to a substantial reduction in CO 2 emission to the atmosphere. The catalytic steam reforming of natural gas is the most common process. However, other feedstock materials, such as biogas, landfill gas and CO 2 -contaminated natural gas, can be reformed as well, either directly or with the addition of steam. The industrial steam reformers are generally fixed bed reactors, and their performance is strongly affected by the heat transfer from the furnace to the catalyst tubes. In top-fired as well as side-fired industrial configurations of steam reformers, the radiation is the main mechanism of heat transfer and convection heat transfer is negligible. The flames and the furnace gas constitute the main sources of the heat. In the nuclear reformers developed primarily in Germany, in connection with the EVA-ADAM project (closed cycle), the nuclear heat is transferred from the nuclear reactor coolant gas by convection, using a heating jacket around the reformer tubes. In this presentation it is proposed that the helium in a secondary loop, used to cool the nuclear reactor, will be employed to evaporate intermediate medium, such as sodium, zinc and aluminum chloride. Then, the vapors of the medium material transfer

Oral microbial profile discriminates breast-fed from formula-fed infants.

Science.gov (United States)

Holgerson, Pernilla L; Vestman, Nelly R; Claesson, Rolf; Ohman, Carina; Domellöf, Magnus; Tanner, Anne C R; Hernell, Olle; Johansson, Ingegerd

2013-02-01

Little is known about the effect of diet on the oral microbiota of infants, although diet is known to affect the gut microbiota. The aims of the present study were to compare the oral microbiota in breast-fed and formula-fed infants, and investigate growth inhibition of streptococci by infant-isolated lactobacilli. A total of 207 mothers consented to participation of their 3-month-old infants. A total of 146 (70.5%) infants were exclusively and 38 (18.4%) partially breast-fed, and 23 (11.1%) were exclusively formula-fed. Saliva from all of their infants was cultured for Lactobacillus species, with isolate identifications from 21 infants. Lactobacillus isolates were tested for their ability to suppress Streptococcus mutans and S sanguinis. Oral swabs from 73 infants were analysed by the Human Oral Microbe Identification Microarray (HOMIM) and by quantitative polymerase chain reaction for Lactobacillus gasseri. Lactobacilli were cultured from 27.8% of exclusively and partially breast-fed infants, but not from formula-fed infants. The prevalence of 14 HOMIM-detected taxa, and total salivary lactobacilli counts differed by feeding method. Multivariate modelling of HOMIM-detected bacteria and possible confounders clustered samples from breast-fed infants separately from formula-fed infants. The microbiota of breast-fed infants differed based on vaginal or C-section delivery. Isolates of L plantarum, L gasseri, and L vaginalis inhibited growth of the cariogenic S mutans and the commensal S sanguinis: L plantarum >L gasseri >L vaginalis. The microbiota of the mouth differs between 3-month-old breast-fed and formula-fed infants. Possible mechanisms for microbial differences observed include species suppression by lactobacilli indigenous to breast milk.

Investigations on a new internally-heated tubular packed-bed methanol–steam reformer

KAUST Repository

Nehe, Prashant; Vanteru, Mahendra Reddy; Kumar, Sudarshan

2015-01-01

Small-scale reformers for hydrogen production through steam reforming of methanol can provide an alternative solution to the demand of continuous supply of hydrogen gas for the operation of Proton Exchange Membrane Fuel Cells (PEMFCs). A packed

Education as Recovery: Neoliberalism, School Reform, and the Politics of Crisis

Science.gov (United States)

Slater, Graham B.

2015-01-01

Building upon critical education policy studies of crisis, disaster, and reform, this essay develops a theory of "recovery" that further elaborates the nature and operation of "crisis politics" in neoliberal education reform. Recovery is an integral process in capital accumulation, exploiting material, and subjective…

Nuclear damage compensation and energy reform

International Nuclear Information System (INIS)

Yokemoto, Masafumi

2013-01-01

Nuclear damage compensation and energy reform were closely related. Nuclear damage compensation cost should be part of generation cost of nuclear power. Extend of nuclear damage compensation was limited by compensation standard of Tokyo Electric Power Co. (TEPCO) following guidelines of Dispute Reconciliation Committee for Nuclear Damage Compensation. TEPCO had already paid compensation of about two trillion yen until now, which was only a part of total damage compensation cost. TEPCO had been provided more than 3.4 trillion yen by Nuclear Damage Liability Facilitation Cooperation, which would be put back by nuclear operators including TEPCO. TEPCO could obtain present raising funds and try to reconstruct business with restart of nuclear power, which might disturb energy reform. Present nuclear damage compensation scheme had better be reformed with learning more from Minamata disease case in Japan. (T. Tanaka)

Steam Methane Reformation Testing for Air-Independent Solid Oxide Fuel Cell Systems

Science.gov (United States)

Mwara, Kamwana N.

2015-01-01

Recently, NASA has been looking into utilizing landers that can be propelled by LOX-CH (sub 4), to be used for long duration missions. Using landers that utilize such propellants, also provides the opportunity to use solid oxide fuel cells as a power option, especially since they are able to process methane into a reactant through fuel reformation. One type of reformation, called steam methane reformation, is a process to reform methane into a hydrogen-rich product by reacting methane and steam (fuel cell exhaust) over a catalyst. A steam methane reformation system could potentially use the fuel cell's own exhaust to create a reactant stream that is hydrogen-rich, and requires less internal reforming of the incoming methane. Also, steam reformation may hold some advantages over other types of reforming, such as partial oxidation (PROX) reformation. Steam reformation does not require oxygen, while up to 25 percent can be lost in PROX reformation due to unusable CO (sub 2) reformation. NASA's Johnson Space Center has conducted various phases of steam methane reformation testing, as a viable solution for in-space reformation. This has included using two different types of catalysts, developing a custom reformer, and optimizing the test system to find the optimal performance parameters and operating conditions.

Progress in catalytic naphtha reforming process: A review

International Nuclear Information System (INIS)

Rahimpour, Mohammad Reza; Jafari, Mitra; Iranshahi, Davood

2013-01-01

Catalytic naphtha reforming process is a vital process for refineries due to the production of high-octane components, which is intensely demanded in our modern life. The significance of this industrial process induced researchers to investigate different aspects of catalytic naphtha reforming process intensively. Some of the investigators try to improve this process by representing more effective catalysts, while others try to elucidate its kinetic and deactivation mechanisms and design more efficient reactor setups. The amount of these established papers is so much that may confuse some of the researchers who want to find collective information about catalytic naphtha reforming process. In the present paper, the published studies from 1949 until now are categorized into three main groups including finding suitable catalyst, revealing appropriate kinetic and deactivation model, and suggesting efficient reactor configuration and mode of operation. These studies are reviewed separately, and a suitable reference is provided for those who want to have access to generalized information about catalytic naphtha reforming process. Finally, various suggestions for revamping the catalytic naphtha reforming process have been proposed as a guideline for further investigations

Engineering testing requirements in FED/INTOR

International Nuclear Information System (INIS)

Abdou, M.A.; Nygren, R.E.; Morgan, G.D.; Trachsel, C.A.; Wire, G.; Oppermann, E.; Puigh, R.; Gold, R.E.

1982-10-01

The FED/INTOR critical issues activity has addressed three key testing requirements that have the largest impact on the design, operation and cost of FED/INTOR. These are: (1) the total testing time (fluence) during the device lifetime, (2) the minimum number of back-to-back cycles, and (3) the neutron wall load (power density in the first wall/blanket). The testing program activities were structured into three tasks in order to define the benefits, and in some cases, costs and risks of these testing requirements. The three tasks were carried out with wide participation of experts from a number of organizations in the United States. Similar effort was performed by Japan, the European Community and the Soviet Union

A NEW MUTATION OPERATOR IN GENETIC PROGRAMMING

Directory of Open Access Journals (Sweden)

Anuradha Purohit

2013-01-01

Full Text Available This paper proposes a new type of mutation operator, FEDS (Fitness, Elitism, Depth, and Size mutation in genetic programming. The concept behind the new mutation operator is inspired from already introduced FEDS crossover operator to handle the problem of code bloating. FEDS mutation operates by using local elitism replacement in combination with depth limit and size of the trees to reduce bloat with a subsequent improvement in the performance of trees (program structures. We have designed a multiclass classifier for some benchmark datasets to test the performance of proposed mutation. The results show that when the initial run uses FEDS crossover and the concluding run uses FEDS mutation, then not only is the final result significantly improved but there is reduction in bloat also.

Drug pricing reform in China: analysis of piloted approaches and potential impact of the reform

Science.gov (United States)

Chen, Yixi; Hu, Shanlian; Dong, Peng; Kornfeld, Åsa; Jaros, Patrycja; Yan, Jing; Ma, Fangfang; Toumi, Mondher

2016-01-01

Objectives In 2009, the Chinese government launched a national healthcare reform programme aiming to control healthcare expenditure and increase the quality of care. As part of this programme, a new drug pricing reform was initiated on 1 June 2015. The objective of this study was to describe the changing landscape of drug pricing policy in China and analyse the potential impact of the reform. Methods The authors conducted thorough research on the drug pricing reform using three Chinese databases (CNKI, Wanfang, and Weipu), Chinese health authority websites, relevant press releases, and pharmaceutical blogs and discussion forums. This research was complemented with qualitative research based on targeted interviews with key Chinese opinion leaders representing the authorities’ and prescribers’ perspectives. Results With the current reform, the government has attempted to replace its direct control over the prices of reimbursable drugs with indirect, incentive-driven influence. Although the exact implementation of the reform remains unclear at the moment, the changes introduced so far and the pilot project designs indicate that China is considering adaptation of some form of internal and external reference pricing policies, commonly used in the Organisation for Economic Co-operation and Development countries. Several challenges related to the potential new mechanism were identified: 1) the risk of hospital underfunding, if hospital funding reform is not prioritised; 2) the risk of promoting the use of cheap, low-quality drugs, if a reliable quality control system is not in place and discrepancy between the available drugs is present; 3) the risk of increasing disparity in access to care between poor and rich regions, in case of country-wide price convergence; and 4) the risk of industry underinvestment, resulting in reduced competition, issues with quality and sustainability of supply, and potentially negative social impact. Conclusions Foreign pricing policies

System requirements of diesel reforming for the SOFC

International Nuclear Information System (INIS)

Harasti, P.T.; Amphlett, J.C.; Mann, R.F.; Peppley, B.A.; Thurgood, C.P.

2003-01-01

Diesel fuels are currently a very attractive source of hydrogen due to the global infrastructure for production and distribution that exists today. In order to extract the hydrogen, the hydrocarbon molecules must be chemically reformed into manageable, hydrogen-rich product gases that can be directly used in electrochemical energy conversion devices such as fuel cells. High temperature fuel cells are particularly attractive for diesel-fuelled systems due to the possibility of thermal integration with the high temperature reformer. The methods available for diesel fuel processing are: Steam Reforming, Partial Oxidation, and Auto-Thermal Reforming. The latter two methods introduce air into the process in order to cause exothermic oxidation reactions, which complement the endothermic heating requirement of the reforming reactions. This helps to achieve the high temperature required, but also introduces nitrogen, which can yield unwanted NO x emissions. The components of the reformer should include: an injection system to mix and vaporize the diesel fuel and steam while avoiding the formation of carbon deposits inside the reactor; a temperature and heat management system; and a method of sulphur removal. This presentation will discuss the operating conditions and design requirements of a diesel fuel processor for a solid oxide fuel cell (SOFC) system. (author)

Thermal modeling of radiation and convection sections of primary reformer of ammonia plant

International Nuclear Information System (INIS)

Sanaye, Sepehr; Baheri, Ehsan

2007-01-01

The primary reformer is basically a furnace containing burners and tubes packed with supported nickel catalyst. Due to the strongly endothermic nature of the process, a large amount of heat is supplied by fuel burning (commonly natural gas) in the furnace chamber. Accordingly, selection of primary reformer operating parameters has an important influence on reduction of operating costs and increasing the reactor performance (conversion efficiency). In this paper, the radiation and convection sections of primary reformer are investigated. The effects of key parameters on reformer performance are studied and the related developed software program is presented. The stirred-reactor furnace model which was used to simulate the radiation section of primary reformer was found to make substantially correct predictions of the overall heat transfer process in the furnace. Comparison of the numerical data obtained from the simulation program with the measured data collected from primary reformer of Razi petrochemical plant showed a mean difference of 0.23% in estimating produced hydrogen mole fraction, as well as 1.7% and 7.25% in computing the outlet temperature of process fluids and induced draft fan (ID) speed, respectively

Mismanagement and reform failures in Nigeria: historical perspectives

Directory of Open Access Journals (Sweden)

John N. N. Ugoani

2017-06-01

Full Text Available The Nigerian economy started experiencing economic recession from 1981 which was characterized by low capacity utilization, incomes, and consumption patterns. Public enterprises were operating at the lowest ebb. Government discovered that, without any exception, such enterprises were infested with problems of confused and conflicting missions; political interference in operating decisions; abuse of monopoly powers; defective capital structures; bureaucratic redtapism in their relations with supervisory agencies; mismanagement; nepotism and corruption. Consequently, reform failures and entrenched bureaucratic corruption have created systemic poverty amidst robust economic growth in Nigeria; a situation that supports the phenomenon of poor people in a rich country. Nigeria at present is ranked among the poorest nations in the world and also has one of the highest unemployment rates. It is estimated that more than one in every five adults in Nigeria is either unemployed or underemployed with about 67 million youths unemployed which is not unrelated to the effects of mismanagement and reform failures. The exploratory research design was used in the study. Qualitative data provided empirical evidence that most past reform programmes in Nigeria did not achieve the objectives for which they were established. With a Negative – Positive Ratio of 7:2 based on the study, it was found that government reform policies have not made the desired positive impact on socio-economic development in Nigeria.

Telecom Reform

DEFF Research Database (Denmark)

Telecom Reform: Principles, Policies and Regulatory Practices, provides a comprehensive and definitive review and assessment of the unfolding telecom reform process, and its implications for information society development. It is an invaluable resource and authoritative reference on telecom reform...... and information infrastructure issues - for people in government, academia, industry and the consulting community. This book addresses the process of policy and regulatory reform in telecom that is now in its formative stage. It draws on detailed knowledge of industry development and regulatory experience......, as well as expertise in the new technologies, industries, economics, policy development, and law to present and critique the principles, policies and regulatory practices associated with telecom reform. Twenty six international experts address thirty two topics that are essential to successful telecom...

Measuring viability of pacs during reform period in Maharashtra: A case study

OpenAIRE

Shah, Deepak

2007-01-01

The study showed a reduction in the operational efficiency of the selected PACS during the post-economic reform period as against the pre-economic reform period. The operational efficiency was measured in respect of various liquidity ratio, profitability ratios and financial leverage ratios. Not only the selected societies showed a decline in their current ratio, rate of return on assets, return on owner’s equity and Marginal Efficiency of Capital (MEC) but also showed higher dependency on le...

Implementing Lean Health Reforms in Saskatchewan

Directory of Open Access Journals (Sweden)

Greg Marchildon

2013-07-01

Full Text Available Saskatchewan has gone further than any other Canadian province in implementing health system process improvements using Lean, a production line discipline that originated with the automobile industry. The goal of the Lean reform is to reduce waste and improve quality and overall health system performance by long-term changes in behaviour. Lean enjoys a privileged position on the provincial government’s agenda because of the policy’s championing by the Deputy Minister of Health and the policy’s fit with the government’s patient-centred care agenda. The implementation of reform depends on a major investment of time in the training and Lean-certification of key leaders and managers in the provincial health system. The Saskatchewan Union of Nurses, the union representing the single largest group of health workers in the province, has agreed to co-operate with the provincial government in implementing Lean-type reforms. Thus far, the government has had limited independent evaluation of Lean while internal evaluations claim some successes.

Steepest Ascent Tariff Reform

DEFF Research Database (Denmark)

Raimondos-Møller, Pascalis; Woodland, Alan

2014-01-01

. In undertaking this task, and by focusing on tariff reforms, we introduce the concept of a steepest ascent policy reform, which is a locally optimal reform in the sense that it achieves the highest marginal gain in utility of any feasible local reform. We argue that this reform presents itself as a natural......The policy reform literature is primarily concerned with the construction of reforms that yield welfare gains. By contrast, this paper’s contribution is to develop a theoretical concept for which the focus is upon the sizes of welfare gains accruing from policy reforms rather than upon their signs...... benchmark for the evaluation of the welfare effectiveness of other popular tariff reforms such as the proportional tariff reduction and the concertina rules, since it provides the maximal welfare gain of all possible local reforms. We derive properties of the steepest ascent tariff reform, construct...

Tri-reforming and combined reforming of methane for producing syngas with desired hydrogen/carbon monoxide ratios

Science.gov (United States)

Pan, Wei

This dissertation is an exploratory study of a new process concept for direct production of synthesis gas (CO + H2) with desired H 2/CO ratios (1.5--2.0) for methanol synthesis and F-T synthesis, using CO2 together with steam and unconverted O2 in flue gas from fossil fuel-fired electric power plants to react with methane or natural gas. This new process is called tri-reforming, referring to simultaneous CO2-steam-O2 reforming of methane or natural gas. This study included (1) The investigation of carbon formation in the tri-reforming process. For comparison, carbon formation in the combined reforming and CO2 reforming reaction was studied as well. (2) The effect of reaction conditions and feed compositions on equilibrium composition (e.g. H2/CO ratio) and equilibrium conversions in the tri-reforming process. (3) The role of catalysts in the tri-reforming process, especially the effect of catalysts on CO2 conversion in the presence of H 2O and O2. It was clearly evidenced from this study that CO in the product stream is probably the major source of carbon over Ni/Al2O3 in the equimolar CO2-CH4 reforming at 650°C and 1 atm. Addition of either O2 or H2O into the CO 2 reforming reaction system can suppress carbon formation. It was demonstrated that carbon-free operation can be achieved in the tri-reforming process. A thermodynamic comparison of tri-reforming with feed compositions of (H2O+CO2+0.5O2)/CH4 (mol ratio) = 1 showed that O2 improves equilibrium CH4 conversion, yet greatly decreases equilibrium CO2 conversion. H2O in tri-reforming has a significant effect on the H2/CO ratio in the products, while O2 has a minor effect. A kinetic study and catalytic performance tests indicated that the support in a supported catalyst has a significant role in enhancing CO2 conversion to CO in the presence of H2O and O2 in tri-reforming. The Ni/MgO catalyst showed superior performance with close to equilibrium CH4 and CO2 conversions at 850°C, 1 atm, and 32,000 ml

Preliminary design of steam reformer in out-pile demonstration test facility for HTTR heat utilization system

Energy Technology Data Exchange (ETDEWEB)

Haga, Katsuhiro; Hino, Ryutaro; Inagaki, Yosiyuki; Hata, Kazuhiko; Aita, Hideki; Sekita, Kenji; Nishihara, Tetsuo; Sudo, Yukio [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Yamada, Seiya

1996-11-01

One of the key objectives of HTTR is to demonstrate effectiveness of high-temperature nuclear heat utilization system. Prior to connecting a heat utilization system to HTTR, an out-pile demonstration test is indispensable for the development of experimental apparatuses, operational control and safety technology, and verification of the analysis code of safety assessment. For the first heat utilization system of HTTR, design of the hydrogen production system by steam reforming is going on. We have proposed the out-pile demonstration test plan of the heat utilization system and conducted preliminary design of the test facility. In this report, design of the steam reformer, which is the principal component of the test facility, is described. In the course of the design, two types of reformers are considered. The one reformer contains three reactor tubes and the other contains one reactor tube to reduce the construction cost of the test facility. We have selected the steam reformer operational conditions and structural specifications by analyzing the steam reforming characteristics and component structural strength for each type of reformer. (author)

Investigation of transient models and performances for a doubly fed wind turbine under a grid fault

DEFF Research Database (Denmark)

Wang, M.; Zhao, B.; Li, H.

2011-01-01

fed induction generator (DFIG), the assessments of the impact on the electrical transient performances were investigated for the doubly fed wind turbine with different representations of wind turbine drive-train dynamics models, different initial operational conditions and different active crowbar...... crowbar on the transient performances of the doubly fed wind turbine were also investigated, with the possible reasonable trip time of crowbar. The investigation have shown that the transient performances are closely correlated with the wind turbine drive train models, initial operational conditions, key...

Bidirectional DC-DC converter fed drive for electric vehicle system ...

African Journals Online (AJOL)

Batteries are the primary energy-storage devices in ground vehicles. Now days battery fed electric drives are commonly being used for electric vehicles applications, due to various advantages, such as: nearly zero emission, guaranteed load leveling, good transient operation and energy recovery during braking operation.

Advances in catalysts for internal reforming in high temperature fuel cells

Science.gov (United States)

Dicks, A. L.

Catalytic steam reforming of natural gas is an attractive method of producing the hydrogen required by the present generation of fuel cells. The molten carbonate (MCFC) and solid oxide (SOFC) fuel cells operate at high enough temperatures for the endothermic steam reforming reaction to be carried out within the stack. For the MCFC, the conventional anodes have insufficient activity to catalyse the steam reforming of natural gas. For these cells, internal reforming can be achieved only with the addition of a separate catalyst, preferably located in close proximity to the anode. However, in the so-called `Direct Internal Reforming' configuration, attack from alkali in the MCFC may severely limit catalyst lifetime. In the case of the state-of-the-art SOFC, natural gas can be reformed directly on the nickel cermet anode. However, in the SOFC, temperature variations in the cell caused by the reforming reaction may limit the amount of internal reforming that can be allowed in practice. In addition, some external pre-reforming may be desirable to remove high molecular weight hydrocarbons from the fuel gas, which would otherwise crack to produce elemental carbon. Degradation of the SOFC anode may also be a problem when internal reforming is carried out. This has prompted several research groups to investigate the use of alternative anode materials.

Non-catalytic recuperative reformer

Science.gov (United States)

Khinkis, Mark J.; Kozlov, Aleksandr P.; Kurek, Harry

2015-12-22

A non-catalytic recuperative reformer has a flue gas flow path for conducting hot flue gas from a thermal process and a reforming mixture flow path for conducting a reforming mixture. At least a portion of the reforming mixture flow path is embedded in the flue gas flow path to permit heat transfer from the hot flue gas to the reforming mixture. The reforming mixture flow path contains substantially no material commonly used as a catalyst for reforming hydrocarbon fuel (e.g., nickel oxide, platinum group elements or rhenium), but instead the reforming mixture is reformed into a higher calorific fuel via reactions due to the heat transfer and residence time. In a preferred embodiment, extended surfaces of metal material such as stainless steel or metal alloy that are high in nickel content are included within at least a portion of the reforming mixture flow path.

FEDS

DEFF Research Database (Denmark)

Venable, John; Pries-Heje, Jan; Baskerville, Richard

2016-01-01

Evaluation of design artefacts and design theories is a key activity in Design Science Research (DSR), as it provides feedback for further development and (if done correctly) assures the rigour of the research. However, the extant DSR literature provides insufficient guidance on evaluation...... to enable Design Science Researchers to effectively design and incorporate evaluation activities into a DSR project that can achieve DSR goals and objectives. To address this research gap, this research paper develops, explicates, and provides evidence for the utility of a Framework for Evaluation in Design...... Science (FEDS) together with a process to guide design science researchers in developing a strategy for evaluating the artefacts they develop within a DSR project. A FEDS strategy considers why, when, how, and what to evaluate. FEDS includes a two-dimensional characterisation of DSR evaluation episodes...

Hydrogen production from methane reforming: thermodynamic assessment

Energy Technology Data Exchange (ETDEWEB)

Assis, A.J.; Hori, Carla E.; Avila Neto, Cicero; Franco, Tatiana [Federal University of Uberlandia (UFU), MG (Brazil). School of Chemical Engineering]. E-mail: adilsonjassis@gmail.com

2008-07-01

The main contributions of this study are to conduct a comparative thermodynamic analysis of methane reforming reactions and to asses the influence of key operational variables on chemical equilibrium using an in-house code, developed in the open-source software Scilab{sup c} INRIA-ENPC (www.scilab.org). Equilibrium compositions are calculated by two distinct methods: evaluation of equilibrium constants and Lagrange multipliers. Both methods result in systems of non-linear algebraic equations, solved numerically using the Scilab function 'fsolve'. Comparison between experimental and simulated equilibrium data, published in the literature, was used to validate the simulated results. Effects of temperature, pressure, initial H{sub 2}O/CH{sub 4} ratio (steam reforming), initial CH{sub 4}:CO{sub 2}:N{sub 2} ratio (dry reforming) and initial O{sub 2}/CH{sub 4} ratio (partial oxidation) on the reaction products were evaluated. (author)

Mixture preparation by cool flames for diesel-reforming technologies

Science.gov (United States)

Hartmann, L.; Lucka, K.; Köhne, H.

The separation of the evaporation from the high-temperature reaction zone is crucial for the reforming process. Unfavorable mixtures of liquid fuels, water and air lead to degradation by local hot spots in the sensitive catalysts and formation of unwanted by-products in the reformer. Furthermore, the evaporator has to work with dynamic changes in the heat transfer, residence times and educt compositions. By using exothermal pre-reactions in the form of cool flames it is possible to realize a complete and residue-free evaporation of liquid hydrocarbon mixtures. The conditions whether cool flames can be stabilised or not is related to the heat release of the pre-reactions in comparison to the heat losses of the system. Examinations were conducted in a flow reactor at atmospheric pressure and changing residence times to investigate the conditions under which stable cool flame operation is possible and auto-ignition or quenching occurs. An energy balance of the evaporator should deliver the values of heat release by cool flames in comparison to the heat losses of the system. The cool flame evaporation is applied in the design of several diesel-reforming processes (thermal and catalytic partial oxidation, autothermal reforming) with different demands in the heat management and operation range (air ratio λ, steam-to-carbon ratio, SCR). The results are discussed at the end of this paper.

Increased kidney growth in formula-fed versus breast-fed healthy infants

DEFF Research Database (Denmark)

Schmidt, Ida M; Damgaard, Ida N; Boisen, Kirsten A

2004-01-01

versus breast feeding on kidney growth in a cohort of 631 healthy children examined at birth, and at 3 and 18 months of age. Kidney size was determined by ultrasonography and related to gender, age, body size, and feeding category (fully breast fed, partially breast fed, or fully formula fed at 3 months...

Reforming Organizational Structures

OpenAIRE

Van de Walle, Steven

2016-01-01

textabstractPublic sectors have undergone major transformations. Public sector reform touches upon the core building blocks of the public sector: organizational structures, people and finances. These are objects of reform. This chapter presents and discusses a set of major transformations with regard to organizational structures. It provides readers a fairly comprehensive overview of the key reforms that have taken place in Western public sectors. Structural reforms in the public sector show ...

Solar central receiver reformer system for ammonia plants

Science.gov (United States)

1980-07-01

Details of the conceptual design, economic analysis, and development plan for a solar central receiver system for retrofitting the Valley Nitrogen Producers, Inc., El Centro, California 600 ST/SD Ammonia Plant are presented. The retrofit system consists of a solar central receiver reformer (SCRR) operating in parallel with the existing fossil fired reformer. Steam and hydrocarbon react in the catalyst filled tubes of the inner cavity receiver to form a hydrogen rich mixture which is the syngas feed for the ammonia production. The SCRR system displaces natural gas presently used in the fossil reformer combustion chamber. The solar reformer retrofit system characteristics and its interface with the existing plant are simple, incorporating state of the art components with proven technology. A northfield composed of one thousand forty second generation heliostats provides solar energy to the receiver which is positioned on top of a 90 meter high steel tower. The overall economics of this system can provide over 20% discount cash flow rate of return with proper investment and market conditions.

Dynamic simulation of pure hydrogen production via ethanol steam reforming in a catalytic membrane reactor

International Nuclear Information System (INIS)

Hedayati, Ali; Le Corre, Olivier; Lacarrière, Bruno; Llorca, Jordi

2016-01-01

Ethanol steam reforming (ESR) was performed over Pd-Rh/CeO 2 catalyst in a catalytic membrane reactor (CMR) as a reformer unit for production of fuel cell grade pure hydrogen. Experiments were performed at 923 K, 6–10 bar, and fuel flow rates of 50–200 μl/min using a mixture of ethanol and distilled water with steam to carbon ratio of 3. A static model for the catalytic zone was derived from the Arrhenius law to calculate the total molar production rates of ESR products, i.e. CO, CO 2 , CH 4 , H 2 , and H 2 O in the catalytic zone of the CMR (coefficient of determination R 2  = 0.993). The pure hydrogen production rate at steady state conditions was modeled by means of a static model based on the Sieverts' law. Finally, a dynamic model was developed under ideal gas law assumptions to simulate the dynamics of pure hydrogen production rate in the case of the fuel flow rate or the operating pressure set point adjustment (transient state) at isothermal conditions. The simulation of fuel flow rate change dynamics was more essential compared to the pressure change one, as the system responded much faster to such an adjustment. The results of the dynamic simulation fitted very well to the experimental values at P = 7–10 bar, which proved the robustness of the simulation based on the Sieverts' law. The simulation presented in this work is similar to the hydrogen flow rate adjustments needed to set the electrical load of a fuel cell, when fed online by the pure hydrogen generating reformer studied. - Highlights: • Ethanol steam reforming (ESR) experiments were performed in a Pd-Ag membrane reactor. • The model of the catalytic zone of the reactor was derived from the Arrhenius law. • The permeation zone (membrane) was modeled based on the Sieverts' law. • The Sieverts' law model showed good results for the range of P = 7–10 bar. • Pressure and fuel flow rate adjustments were considered for dynamic simulation.

A Current-Fed Isolated Bidirectional DC-DC Converter

DEFF Research Database (Denmark)

Sun, Xiaofeng; Wu, Xiaoying; Shen, Yanfeng

2017-01-01

This paper proposes a current-fed isolated bidirectional DC-DC converter (CF-IBDC) which has the advantages of wide input voltage range, low input current ripple, low conduction losses, and soft switching over the full operating range. Compared with conventional CF-IBDCs, the voltage spikes...

Reform in Mexico: imports, exports and investments

International Nuclear Information System (INIS)

Estrada, J.

1997-01-01

Terms of the policy and regulatory reform for the natural gas sector in Mexico since 1993 were described, and major changes taking place in the structure, organization and operations of the sector since the introduction of reforms were reviewed. Consequences that the structural changes are likely to have on the long-term balance of natural gas supply and demand in Mexico, have been assessed. The goal of full open access by November of 1997 was reiterated. Reforms to the electric power industry also have been undertaken. As with natural gas, the objective is to eliminate the State monopoly and to allow private power producers to participate in the expansion of the sector's generating capacity. Public investment will be directed towards the improvement of transmission and distribution networks. Over time, independent power producers are expected to become the principal source of funds for the expansion of electric power availability in Mexico. 3 tabs., 29 figs

Evolving Microbial Communities in Cellulose-Fed Microbial Fuel Cell

Directory of Open Access Journals (Sweden)

Renata Toczyłowska-Mamińska

2018-01-01

Full Text Available The abundance of cellulosic wastes make them attractive source of energy for producing electricity in microbial fuel cells (MFCs. However, electricity production from cellulose requires obligate anaerobes that can degrade cellulose and transfer electrons to the electrode (exoelectrogens, and thus most previous MFC studies have been conducted using two-chamber systems to avoid oxygen contamination of the anode. Single-chamber, air-cathode MFCs typically produce higher power densities than aqueous catholyte MFCs and avoid energy input for the cathodic reaction. To better understand the bacterial communities that evolve in single-chamber air-cathode MFCs fed cellulose, we examined the changes in the bacterial consortium in an MFC fed cellulose over time. The most predominant bacteria shown to be capable electron generation was Firmicutes, with the fermenters decomposing cellulose Bacteroidetes. The main genera developed after extended operation of the cellulose-fed MFC were cellulolytic strains, fermenters and electrogens that included: Parabacteroides, Proteiniphilum, Catonella and Clostridium. These results demonstrate that different communities evolve in air-cathode MFCs fed cellulose than the previous two-chamber reactors.

Plasma steam reforming of E85 for hydrogen rich gas production

International Nuclear Information System (INIS)

Zhu Xinli; Hoang Trung; Lobban, Lance L; Mallinson, Richard G

2011-01-01

E85 (85 vol% ethanol and 15 vol% gasoline) is a partly renewable fuel that is increasing in supply availability. Hydrogen production from E85 for fuel cell or internal combustion engine applications is a potential method for reducing CO 2 emissions. Steam reforming of E85 using a nonthermal plasma (pulse corona discharge) reactor has been exploited at low temperature (200-300 0 C) without external heating, diluent gas, oxidant or catalyst in this work. Several operational parameters, including the discharge current, E85 concentration and feed flow rate, have been investigated. The results show that hydrogen rich gases (63-67% H 2 and 22-29% CO, with small amounts of CO 2 , C 2 hydrocarbons and CH 4 ) can be produced by this method. A comparison with ethanol reforming and gasoline reforming under identical conditions has also been made and the behaviour of E85 reforming is found to be close to that of ethanol reforming with slightly higher C 2 hydrocarbons yields.

Overall control strategy of variable speed doubly-fed induction generator wind turbine

Energy Technology Data Exchange (ETDEWEB)

Hansen, Anca D.; Soerensen, Poul [Risoe National Laboratory, Roskilde (Denmark). Wind Energy Dept.; Iov, Florin; Blaabjerg, Frede [Aalborg Univ. (Denmark). Inst. of Energy Technology

2004-07-01

The variable speed doubly-fed induction generator wind turbine is today the most widely used concept. The paper presents an overall control system of the variable speed DFIG wind turbine, with focus on the control strategies and algorithms applied at each hierarchical control level of the wind turbine. The present control method is designed for normal continuous operations. The strongest feature of the implemented control method is that it allows the turbine to operate with the optimum power efficiency over a wider range of wind speeds. The variable speed/variable pitch wind turbine with doubly-fed induction generator is implemented in the dynamic power system simulation tool DIgSILENT. Simulation results are performed and analyzed in different normal operating conditions.

Electricity reforms and firm level responses: changing ownership, fuel choices, and technology decisions

International Nuclear Information System (INIS)

Shukla, P.R.; Nag, Tirthankar; Biswas, Debashish

2005-01-01

This paper examines how electricity reforms in India managed to influence the responses of generating firms. Indian electricity reforms have federal and state character. This paper utilises an extensive survey of generation units in Gujarat State. The findings suggest that reforms have created heterogeneous ownership of generation units. The fuel-mix and technology choices of new owners differ from pre-reform pattern followed by state-owned utilities. The new owners prefer natural gas, sourced technologies internationally, and chosen unit sizes that follow market dynamics. Consequently, the operational performance of power plants has improved. This paper quantifies energy efficiency and carbon intensity baselines, projects their trends, and delineates the contribution of reforms for the state. In generalisation, this paper argues that energy and cost efficiency of power plants across different states shows secular improvements under the reforms, though it cautions that environmental performance would not show such uniformly improving trends. (Author)

Improvements of reforming performance of a nuclear heated steam reforming process

International Nuclear Information System (INIS)

Hada, Kazuhiko

1996-10-01

Performance of an energy production process by utilizing high temperature nuclear process heat was not competitive to that by utilizing non-nuclear process heat, especially fossil-fired process heat due to its less favorable chemical reaction conditions. Less favorable conditions are because a temperature of the nuclear generated heat is around 950degC and the heat transferring fluid is the helium gas pressurized at around 4 MPa. Improvements of reforming performance of nuclear heated steam reforming process were proposed in the present report. The steam reforming process, one of hydrogen production processes, has the possibility to be industrialized as a nuclear heated process as early as expected, and technical solutions to resolve issues for coupling an HTGR with the steam reforming system are applicable to other nuclear-heated hydrogen production systems. The improvements are as follows: As for the steam reformer, (1) increase in heat input to process gas by applying a bayonet type of reformer tubes and so on, (2) increase in reforming temperature by enhancing heat transfer rate by the use of combined promoters of orifice baffles, cylindrical thermal radiation pipes and other proposal, and (3) increase in conversion rate of methane to hydrogen by optimizing chemical compositions of feed process gas. Regarding system arrangement, a steam generator and superheater are set in the helium loop as downstream coolers of the steam reformer, so as to effectively utilize the residual nuclear heat for generating feed steam. The improvements are estimated to achieve the hydrogen production rate of approximately 3800 STP-m 3 /h for the heat source of 10 MW and therefore will provide the potential competitiveness to a fossil-fired steam reforming process. Those improvements also provide the compactness of reformer tubes, giving the applicability of seamless tubes. (J.P.N.)

Integrated HT-PEMFC and multi-fuel reformer for micro CHP. Final report

Energy Technology Data Exchange (ETDEWEB)

2010-07-01

The project was initiated in April 2008 and completed by the end of March 2010. The project consortium consisted of: Dantherm Power, Serenergy and Department of Energy Technology at Aalborg University (project manager). The activities were coordinated with the project ''Nordjysk H2FC Center'' funded by the Region of Northern Jutland. A number of experimental characterization methods were developed through this project to improve the understanding in fuel cell performance under different operating conditions. In particular the application of Electrochemical Impedance Spectroscopy was found useful and lead to new information about individual losses in the fuel cell. Techniques to measure local temperatures of the MEA were also successfully developed. Durability studies were made on single cells as well as complete stacks. A dedicated test facility was constructed in a container to isolate the test from disturbances that occur in the laboratory. The stack tests were run for just above 6 months with few interruptions and it was found that single cell and stack degradation rates were comparable. Operation temperature was found to have the most pronounced influence on degradation. The information formed the basis for a simple modeling tool to optimize the stack operating temperature versus reformate gas CO concentration. The activities on multi-fuel reformer development were mostly focused on two issues; manufacturability and analyses of flow distribution and heat transfer. The latter was required since these areas these turned out to cause challenges in the reactor design. Through a combination of experimental tests, CFD analyses and flow network modeling design modifications were suggested to improve flow distribution on both the flue gas side and the reformate side. Most of these design changes were not validated in this project through the construction and test of a new reformer. In spite of the problems identifies, the reformed successfully

ORGANIZATION OF FREIGHT TRANSPORTATION IN UKRAINE IN THE REFORMATION CONDTIONS

Directory of Open Access Journals (Sweden)

L. V. Martseniuk

2014-04-01

Full Text Available Purpose. Each country of the former Soviet Union carries out railroad industry reformation according to different models depending on orienting points and the goals it establishes. All railway administrations have faced the problem of considerable reduction of freight and passenger transportation volumes, aging of main assets, lack of investments for their renovation. The purpose of the paper is the development of optimal management structure of freight cars in conditions of railway transport reformation. Methodology. The theoretical and methodological basis for research is a systematic analysis of problems of providing the competitiveness of the transport industry in the field of freight railway transportations, theoretical principles of economics in the production efficiency, market economics transformation and management of the national economy. Findings. The author has developed an improved mechanism for freight traffic management, which differs from the existing one by its adaptation to the conditions of industry being reformed and the organization of management companies. These companies together with the Ukrainian transport and logistics center centralize management of all freight cars of both domestic and foreign operating companies. Originality. Author presents the theoretical generalization and new solution of the scientific problem. It appears in the development of theoretical and methodological approaches to the management structure of the freight cars by operating companies in conditions of railway transport reforming through the management companies organization in Ukraine. The above mentioned companies will combine two types of activity – the commercial one and the cars repair of different property, it will reduce car turnover, stay time of rolling stock in the inoperative park and thereby improve the efficiency of freight transportations. Particularly, they will lease and have the right to dispose universal cars of domestic

Land reform in Russia in 1990-2000-ies, or how land reform was "reformed" during the departmental reorganization

Directory of Open Access Journals (Sweden)

Barsukova Svetlana, Yu.

2015-06-01

Full Text Available The paper provides an overview of the land reform in Russia's recent history. Analysis of land reform, which started in 1990, shows what actions and what logic led the land sector in the state in which it was at the finish line of the quarter-century reform marathon. The reform process was not linear, it highlighted the steps differing objectives and strategies to achieve them. Land reform is presented as a struggle of different political forces, which were reflected in the redistribution of functions between agencies in lobbying for appointment to senior positions promoted various commands. The authors conclude about the gradual displacement of state regulation of land relations, the deliberate destruction of the land management as a basis for the development of land resources.

Radiant non-catalytic recuperative reformer

Energy Technology Data Exchange (ETDEWEB)

Khinkis, Mark J.; Kozlov, Aleksandr P.

2017-10-31

A radiant, non-catalytic recuperative reformer has a flue gas flow path for conducting hot exhaust gas from a thermal process and a reforming mixture flow path for conducting a reforming mixture. At least a portion of the reforming mixture flow path is positioned adjacent to the flue gas flow path to permit heat transfer from the hot exhaust gas to the reforming mixture. The reforming mixture flow path contains substantially no material commonly used as a catalyst for reforming hydrocarbon fuel (e.g., nickel oxide, platinum group elements or rhenium), but instead the reforming mixture is reformed into a higher calorific fuel via reactions due to the heat transfer and residence time. In a preferred embodiment, a portion of the reforming mixture flow path is positioned outside of flue gas flow path for a relatively large residence time.

The Relevance of Reformed Scholasticism for Contemporary Systematic Theology

Directory of Open Access Journals (Sweden)

te Velde Dolf

2016-12-01

Full Text Available This article examines how Reformed scholasticism can be relevant for systematic theology today. ‘Reformed Scholasticism’ denotes the academic practice in which the doctrines of the Reformation are expounded, explained, and defended. It is primarily a method and attitude in search of the truth, based on a careful reading of Scripture, drawing on patristic and medieval traditions, and interacting with philosophy and other academic disciplines. In addition to these methodological features, important contributions on various doctrinal topics can be discovered. The doctrine of God has a foundational role in the sense that God is the primary subject of the other topics (creation, salvation, etc.. Reformed scholastic theology not only examines God’s inner essence, but also the concrete relation and operation of God toward his world. In a Trinitarian understanding of God’s essence, a distinction is maintained between God’s immanent relatedness as three divine Persons, and his outward relation to created reality. The doctrines of creation and providence gave occasion for Reformed scholastics to engage in debates with the emerging natural sciences, and also articulated important theological insights concerning the involvement of God in creaturely affairs. In Christology, the Reformed orthodox maintained the classic doctrine of the two natures of Jesus Christ, against Socinians and other opponents. These ontological statements are the necessary conditions for a proper understanding of the salvation by Christ. While the doctrinal positions of Reformed scholastic theology cannot be automatically transmitted to contemporary discussions, we can profit from this tradition on several levels of method and content.

Energy and exergy analysis of an ethanol reforming process for solid oxide fuel cell applications.

Science.gov (United States)

Tippawan, Phanicha; Arpornwichanop, Amornchai

2014-04-01

The fuel processor in which hydrogen is produced from fuels is an important unit in a fuel cell system. The aim of this study is to apply a thermodynamic concept to identify a suitable reforming process for an ethanol-fueled solid oxide fuel cell (SOFC). Three different reforming technologies, i.e., steam reforming, partial oxidation and autothermal reforming, are considered. The first and second laws of thermodynamics are employed to determine an energy demand and to describe how efficiently the energy is supplied to the reforming process. Effect of key operating parameters on the distribution of reforming products, such as H2, CO, CO2 and CH4, and the possibility of carbon formation in different ethanol reformings are examined as a function of steam-to-ethanol ratio, oxygen-to-ethanol ratio and temperatures at atmospheric pressure. Energy and exergy analysis are performed to identify the best ethanol reforming process for SOFC applications. Copyright © 2014 Elsevier Ltd. All rights reserved.

Materials and design experience in a slurry-fed electric glass melter

International Nuclear Information System (INIS)

Barnes, S.M.; Larson, D.E.

1981-08-01

The design of a slurry-fed electric gas melter and an examination of the performance and condition of the construction materials were completed. The joule-heated, ceramic-lined melter was constructed to test the applicability of materials and processes for high-level waste vitrification. The developmental Liquid-Fed Ceramic Melter (LFCM) was operated for three years with simulated high-level waste and was subjected to conditions more severe than those expected for a nuclear waste vitrification plant

Modeling and simulation of an isothermal reactor for methanol steam reforming

Directory of Open Access Journals (Sweden)

Raphael Menechini Neto

2014-04-01

Full Text Available Due to growing electricity demand, cheap renewable energy sources are needed. Fuel cells are an interesting alternative for generating electricity since they use hydrogen as their main fuel and release only water and heat to the environment. Although fuel cells show great flexibility in size and operating temperature (some models even operate at low temperatures, the technology has the drawback for hydrogen transportation and storage. However, hydrogen may be produced from methanol steam reforming obtained from renewable sources such as biomass. The use of methanol as raw material in hydrogen production process by steam reforming is highly interesting owing to the fact that alcohol has the best hydrogen carbon-1 ratio (4:1 and may be processed at low temperatures and atmospheric pressures. They are features which are desirable for its use in autonomous fuel cells. Current research develops a mathematical model of an isothermal methanol steam reforming reactor and validates it against experimental data from the literature. The mathematical model was solved numerically by MATLAB® and the comparison of its predictions for different experimental conditions indicated that the developed model and the methodology for its numerical solution were adequate. Further, a preliminary analysis was undertaken on methanol steam reforming reactor project for autonomous fuel cell.

Hydrogen production via autothermal reforming of Diesel fuel

Energy Technology Data Exchange (ETDEWEB)

Pasel, J.; Meissner, J.; Pors, Z.; Cremer, P.; Peters, R.; Stolten, D. [Forschungszentrum Juelich GmbH, Institute for Materials and Processes in Energy Systems (IWV 3), D-52425 Juelich (Germany); Palm, C. [BASF Schwarzheide GmbH, Schipkauer Str. 1, Einheit PFO/I, D-01986 Schwarzheide (Germany)

2004-08-01

Hydrogen, for the operation of a polymer electrolyte fuel cell, can be produced by means of autothermal reforming of liquid hydrocarbons. Experiments, especially with ATR 4, which produces a molar hydrogen stream equivalent to an electrical power in the fuel cell of 3 kW, showed that the process should be preferably run in the temperature range between 700 and 850 . This ensures complete hydrocarbon conversion and avoids the formation of considerable amounts of methane and organic compounds in the product water. Experiments with commercial diesel showed promising results but insufficient long-term stability. Experiments concerning the ignition of the catalytic reaction inside the reformer proved that within 60 s after the addition of water and hydrocarbons the reformer reached 95% of its maximum molar hydrogen flow. Measurements, with respect to reformer start-up, showed that it takes approximately 7 min. to heat up the monolith to a temperature of 340 using an external heating device. Modelling is performed, aimed at the modification of the mixing chamber of ATR Type 5, which will help to amend the homogeneous blending of diesel fuel with air and water in the mixing chamber. (Abstract Copyright [2004], Wiley Periodicals, Inc.)

Use of catalytic reforming to aid natural gas HCCI combustion in engines: experimental and modelling results of open-loop fuel reforming

Energy Technology Data Exchange (ETDEWEB)

Peucheret, S.; Wyszynski, M.L.; Lehrle, R.S. [Future Power Systems Group, Mechanical Engineering, The University of Birmingham, Edgbaston, Birmingham B15 2TT (United Kingdom); Golunski, S. [Johnson Matthey, Technology Centre, Blount' s Court, Sonning Common, Reading RG4 9NH (United Kingdom); Xu, H. [Jaguar Land Rover Research, Jaguar Land Rover W/2/021, Abbey Road, Coventry CV3 4LF (United Kingdom)

2005-12-01

The potential of the homogeneous charge compression ignition (HCCI) combustion process to deliver drastically reduced emissions of NO{sub x} and improved fuel economy from internal combustion engines is well known. The process is, however, difficult to initiate and control, especially when methane or natural gas are used as fuel. To aid the HCCI combustion of natural gas, hydrogen addition has been successfully used in this study. This hydrogen can be obtained from on-line reforming of natural gas. Methane reforming is achieved here by reaction with engine exhaust gas and air in a small scale monolith catalytic reactor. The benchmark quantity of H{sub 2} required to enhance the feasibility and engine load range of HCCI combustion is 10%. For low temperature engine exhaust gas, typical for HCCI engine operating conditions, experiments show that additional air is needed to produce this quantity. Experimental results from an open-loop fuel exhaust gas reforming system are compared with two different models of basic thermodynamic equilibria calculations. At the low reactor inlet temperatures needed for the HCCI application (approx. 400 deg C) the simplified three-reaction thermodynamic equilibrium model is in broad agreement with experimental results, while for medium (550-650 deg C) inlet temperature reforming with extra air added, the high hydrogen yields predicted from the multi-component equilibrium model are difficult to achieve in a practical reformer. (author)

Dynamic modeling and controllability analysis of an ethanol reformer for fuel cell application

Energy Technology Data Exchange (ETDEWEB)

Garcia, Vanesa M.; Serra, Maria; Riera, Jordi [Institut de Robotica i Informatica Industrial (CSIC-UPC), Llorens i Artigas 4-6, 08028 Barcelona (Spain); Lopez, Eduardo [Institut de Tecniques Energetiques, Universitat Politecnica de Catalunya, Diagonal 647, ed. ETSEIB, 08028 Barcelona (Spain); Planta Piloto de Ingenieria Quimica (CONICET-UNS), Camino de la Carrindanga km7, 8000 Bahia Blanca (Argentina); Llorca, Jordi [Institut de Tecniques Energetiques, Universitat Politecnica de Catalunya, Diagonal 647, ed. ETSEIB, 08028 Barcelona (Spain)

2010-09-15

This work presents a controllability analysis of a low temperature ethanol reformer based on a cobalt catalyst for fuel cell application. The study is based on a non-linear dynamic model of a reformer which operates in three separate stages: ethanol dehydrogenation to acetaldehyde and hydrogen, acetaldehyde steam reforming, and water-gas-shift reaction. The controllability analysis is focused on the rapid dynamics due to mass balances and is based on a linearization of the complex non-linear model of the reformer. RGA, CN and MRI analysis tools are applied to the linear model suggesting that a good performance can be obtained with decentralized control for frequencies up to 0.1 rad s{sup -1}. (author)

Steepest Ascent Tariff Reforms

DEFF Research Database (Denmark)

Raimondos-Møller, Pascalis; Woodland, Alan D.

2006-01-01

a theoretical concept where the focus is upon the size of welfare gains accruing from tariff reforms rather than simply with the direction of welfare effects that has been the concern of theliterature.JEL code: F15.Keywords: Steepest ascent tariff reforms; piecemeal tariff policy; welfare; market access; small......This paper introduces the concept of a steepest ascent tariff reform for a small open economy. By construction, it is locally optimal in that it yields the highest gain in utility of any feasible tariff reform vector of the same length. Accordingly, it provides a convenient benchmark...... for the evaluation of the welfare effectiveness of other well known tariff reform rules, as e.g. the proportional and the concertina rules. We develop the properties of this tariff reform, characterize the sources of the potential welfare gains from tariff reform, use it to establish conditions under which some...

Hydrogen Production via a High-Efficiency Low-Temperature Reformer

Energy Technology Data Exchange (ETDEWEB)

Paul KT Liu; Theo T. Tsotsis

2006-05-31

Fuel cells are promoted by the US government as a viable alternative for clean and efficient energy generation. It is anticipated that the fuel cell market will rise if the key technical barriers can be overcome. One of them is certainly fuel processing and purification. Existing fuel reforming processes are energy intensive, extremely complicated and capital intensive; these disadvantages handicap the scale-down of existing reforming process, targeting distributed or on-board/stationary hydrogen production applications. Our project involves the bench-scale demonstration of a high-efficiency low-temperature steam reforming process. Hydrogen production can be operated at 350 to 400ºC with our invention, as opposed to >800ºC of existing reforming. In addition, our proposed process improves the start-up deficiency of conventional reforming due to its low temperature operation. The objective of this project is to demonstrate the invented process concept via a bench scale unit and verify mathematical simulation for future process optimization study. Under this project, we have performed the experimental work to determine the adsorption isotherm, reaction kinetics, and membrane permeances required to perform the process simulation based upon the mathematical model developed by us. A ceramic membrane coated with palladium thin film fabricated by us was employed in this study. The adsorption isotherm for a selected hydrotalcite adsorbent was determined experimentally. Further, the capacity loss under cyclic adsorption/desorption was confirmed to be negligible. Finally a commercial steam reforming catalyst was used to produce the reaction kinetic parameters required for the proposed operating condition. With these input parameters, a mathematical simulation was performed to predict the performance of the invented process. According to our simulation, our invented hybrid process can deliver 35 to 55% methane conversion, in comparison with the 12 and 18-21% conversion of

Croatian Energy Sector Reform - Results Achieved

International Nuclear Information System (INIS)

Nota, R.

2001-01-01

During the past ten years, the energy sector has passed through significant changes including fundamental market, economic, legislative and institutional aspects of sector operation. As the main goal of the Republic of Croatia is the integration into the European Union, the energy sector reform ought to be conducted in keeping with the present market development processes of the EU in such a way as to fulfil all safety criteria. In view of the above mentioned, the Croatian Parliament brought a number of laws during its session in July 2001 (''Official Gazette'' 68/01): 1. Energy Law 2. Energy Activities Regulation Law 3. Electricity Market Law 4. Gas Market Law 5. Oil and Oil Derivatives Market Law, which present the commencement of the energy sector reform (www.mingo.hr).(author)

Health system reform.

Science.gov (United States)

Ortolon, Ken

2009-06-01

A vote on reforming the nation's health care system seems likely this summer as President Obama makes good on a campaign pledge. Although the Democratic leadership in Congress appears ready to push through reform legislation before the next election, TMA and AMA leaders say very little is known about what that "reform" likely will look like.

Medical Education and Curriculum Reform: Putting Reform Proposals in Context

Directory of Open Access Journals (Sweden)

Daniel Kam Yin Chan, MD, MB.BS, MHA

2004-01-01

Full Text Available The purpose of this paper is to elaborate criteria by which the principles of curriculum reform can be judged. To this end, the paper presents an overview of standard critiques of medical education and examines the ways medical curriculum reforms have responded to these critiques. The paper then sets out our assessment of these curriculum reforms along three parameters: pedagogy, educational context, and knowledge status. Following on from this evaluation of recent curriculum reforms, the paper puts forward four criteria with which to gauge the adequacy medical curriculum reform. These criteria enable us to question the extent to which new curricula incorporate methods and approaches for ensuring that its substance: overcomes the traditional opposition between clinical and resource dimensions of care; emphasizes that the clinical work needs to be systematized in so far as that it feasible; promotes multi-disciplinary team work, and balances clinical autonomy with accountability to non-clinical stakeholders.

Analysis of Microstrip Line Fed Patch Antenna for Wireless Communications

Directory of Open Access Journals (Sweden)

Singh Ashish

2017-11-01

Full Text Available In this paper, theoretical analysis of microstrip line fed rectangular patch antenna loaded with parasitic element and split-ring resonator is presented. The proposed antenna shows that the dualband operation depends on gap between parasitic element, split-ring resonator, length and width of microstrip line. It is found that antenna resonates at two distinct resonating modes i.e., 0.9 GHz and 1.8 GHz for lower and upper resonance frequencies respectively. The antenna shows dual frequency nature with frequency ratio 2.0. The characteristics of microstrip line fed rectangular patch antenna loaded with parasitic element and split-ring resonator antenna is compared with other prototype microstrip line fed antennas. Further, the theoretical results are compared with simulated and reported experimental results, they are in close agreement.

Administrative Reform and the Egyptian Ministry of Education.

Science.gov (United States)

Hanson, E. Mark

1990-01-01

Identifies and analyzes the organizational constraints acting upon and within the Egyptian Ministry of Education that deter its capacity for administrative reform. Despite being highly bureaucratic, the ministry's administrative structure operates with relative efficiency. However, the ministry cannot seem to change the educational system's…

Catalytic autothermal reforming of hydrocarbon fuels for fuel cells

International Nuclear Information System (INIS)

Krumpelt, M.; Krause, T.; Kopasz, J.; Carter, D.; Ahmed, S.

2002-01-01

Fuel cell development has seen remarkable progress in the past decade because of an increasing need to improve energy efficiency as well as to address concerns about the environmental consequences of using fossil fuel for producing electricity and for propulsion of vehicles[1]. The lack of an infrastructure for producing and distributing H(sub 2) has led to a research effort to develop on-board fuel processing technology for reforming hydrocarbon fuels to generate H(sub 2)[2]. The primary focus is on reforming gasoline, because a production and distribution infrastructure for gasoline already exists to supply internal combustion engines[3]. Existing reforming technology for the production of H(sub 2) from hydrocarbon feedstocks used in large-scale manufacturing processes, such as ammonia synthesis, is cost prohibitive when scaled down to the size of the fuel processor required for transportation applications (50-80 kWe) nor is it designed to meet the varying power demands and frequent shutoffs and restarts that will be experienced during normal drive cycles. To meet the performance targets required of a fuel processor for transportation applications will require new reforming reactor technology developed to meet the volume, weight, cost, and operational characteristics for transportation applications and the development of new reforming catalysts that exhibit a higher activity and better thermal and mechanical stability than reforming catalysts currently used in the production of H(sub 2) for large-scale manufacturing processes

Single-Electrical-Port Control of Cascaded Doubly-Fed Induction Machine for EV/HEV Applications

DEFF Research Database (Denmark)

Han, Peng; Cheng, Ming; Chen, Zhe

2017-01-01

A single-electrical-port control scheme, for four-quadrant operation of cascaded doubly-fed induction machine (CDFIM), which has long been conceived as a motor or generator only suitable for limited two-quadrant operation, is proposed and theoretically demonstrated. The drive system is configured...... as slave inverter. With this configuration, the control emphasis is placed on the slave inverter, yielding reduced control complexity and cost, and the inaccuracy of flux estimation in conventional FOC for singly-fed induction machines is avoided at very low or even zero speed. It is found that the doubly...

Reform despite politics? The political economy of power sector reform in Fiji, 1996–2013

International Nuclear Information System (INIS)

Dornan, Matthew

2014-01-01

Attempts to reform the electricity sector in developing countries have achieved mixed results, despite the implementation of similar reforms in many developed countries, and concerted effort by donors to transfer reform models. In many cases, political obstacles have prevented full and effective implementation of donor-promoted reforms. This paper examines the political economy of power sector reform in Fiji from 1996 to 2013. Reform has been pursued with political motives in a context of clientelism. Policy inconsistency and reversal is explained by the political instability of ethnic-based politics in Fiji. Modest success has been achieved in recent years despite these challenges, with Fiji now considered a model of power sector reform for other Small Islands Developing States (SIDS) in the Pacific. The experience demonstrates that reform is possible within difficult political environments, but it is challenging, takes time and is not guaranteed. The way in which political motives have driven and shaped reform efforts also highlights the need for studies of power sector reform to direct greater attention toward political drivers behind reform. - Highlights: • This is the first study of power sector reform in Fiji or other Small Island Developing States (SIDS) of the Pacific. • The clientelist nature of politics in Fiji is found to have both driven and shaped reform efforts. • There has been modest success in recent years despite these obstacles, with Fiji now considered a model for other SIDS. • The experience demonstrates that reform is possible within difficult political environments, but it is challenging, takes time and is not guaranteed

Pension reform in the European periphery: the role of EU reform advocacy

NARCIS (Netherlands)

Stepan, M.; Anderson, K.A.

2014-01-01

SUMMARY: This paper analyzes the impact of international reform advocacy on national pension reforms. We analyze European Union (EU) reform advocacy in two EU member states: Greece and Hungary. Although the EU has articulated a fairly coherent template for sustainable pensions, its use of soft

On Line Stator Resistance Tuning of DTC Control CSI Fed IM Drives

OpenAIRE

PANNEER SELVAM

2012-01-01

Current source inverter (CSI) fed drives are employed in high power applications. The conventional CSI drives suffer from drawbacks such as harmonic resonance, unstable operation at low speed ranges, and torque pulsation. CSI fed drives with Direct Torque Control (DTC) has drawn the attention of the motor drives designers because its implementation requires no position sensor. Crucial to the success of this scheme is the estimation of electromagnetic torque and stator flux linkages using the ...

Overall control strategy of variable speed doubly-fed induction generator wind turbine

DEFF Research Database (Denmark)

Hansen, A.D.; Iov, F.; Sørensen, Poul Ejnar

2004-01-01

The variable speed doubly-fed induction generator wind turbine is today the most widely used concept. The paper presents an overall control system of the variable speed DFIG wind turbine, with focus on the control strategies and algorithms applied at each hierarchical control level of the wind tu......-fed induction generator is implemented in the dynamic power system simulation tool DIgSILENT. Simulation results are performed and analyzed in different normal operating conditions....

Steam Reforming of Low-Level Mixed Waste

Energy Technology Data Exchange (ETDEWEB)

None

1998-01-01

Under DOE Contract No. DE-AR21-95MC32091, Steam Reforming of Low-Level Mixed Waste, ThermoChem has successfully designed, fabricated and operated a nominal 90 pound per hour Process Development Unit (PDU) on various low-level mixed waste surrogates. The design construction, and testing of the PDU as well as performance and economic projections for a 500- lb/hr demonstration and commercial system are described. The overall system offers an environmentally safe, non-incinerating, cost-effective, and publicly acceptable method of processing LLMW. The steam-reforming technology was ranked the No. 1 non-incineration technology for destruction of hazardous organic wastes in a study commissioned by the Mixed Waste Focus Area published April 1997.1 The ThermoChem steam-reforming system has been developed over the last 13 years culminating in this successful test campaign on LLMW surrogates. Six surrogates were successfidly tested including a 750-hour test on material simulating a PCB- and Uranium- contaminated solid waste found at the Portsmouth Gaseous Diffusion Plant. The test results indicated essentially total (>99.9999oA) destruction of RCRA and TSCA hazardous halogenated organics, significant levels of volume reduction (> 400 to 1), and retention of radlonuclides in the volume-reduced solids. Cost studies have shown the steam-reforming system to be very cost competitive with more conventional and other emerging technologies.

The Need for District Support for School Reform: What the Researchers Say. Research Brief.

Science.gov (United States)

Appelbaum, Deborah

This article focuses on the school district's role in implementing Comprehensive School Reform (CSR). Research shows that effective district support for CSR varies from district to district. This is due, in part, to the fact that many prior models bypassed the district, operating under the belief that reform would be more effective if it targeted…

Chemical looping reforming in packed-bed reactors : modelling, experimental validation and large-scale reactor design

NARCIS (Netherlands)

Spallina, V.; Marinello, B.; Gallucci, F.; Romano, M.C.; van Sint Annaland, M.

This paper addresses the experimental demonstration and model validation of chemical looping reforming in dynamically operated packed-bed reactors for the production of H2 or CH3OH with integrated CO2 capture. This process is a combination of auto-thermal and steam methane reforming and is carried

Reforming Romanian energy policy

International Nuclear Information System (INIS)

Perkins, S.

1993-01-01

Success in reforming energy sector depends on the implementation of the programme of economic reform agreed in February 1993. The difficulty of the negotiations between the International Monetary Fund and the Romanian government reflects the wider difficulties faced by the economy as a whole. They can be blamed in part on the legacy of uneconomic and inflexible industrial development and in part on opposition from interest groups which stand to lose from reform. Nonetheless, in spite of hesitant approach, the government does appear committed to the economic reform necessary to establish a market-oriented economy. But as the danger of a financial crisis engendered by the inadequately supported short-term borrowing of foreign exchange becomes urgent, the question is whether economic reform can be now implemented fast enough to protect economic enterprises and saving from a debt crisis. The scope for further delay in implementing the 1993 economic reform programme is fast disappearing. Procrastination should not be allowed to threaten the success of the reforms achieved in the energy and other sectors of the economy. 8 refs., 2 figs

Upgrading of reformate gas for different applications with focus on small-scale hydrogen production

Energy Technology Data Exchange (ETDEWEB)

Jannasch, Anna-Karin; Silversand, Fredrik [CATATOR AB, Lund (Sweden)

2004-12-01

Hydrogen gas or hydrogen rich gas is today used in many different applications, i.e. as fuel in fuel cells or additive in vehicle fuel (i.e. hythane) and as reagent or reducing agent in different industrial product lines. The majority of the hydrogen is produced either via electrolysis or reformation, where this work has entirely been focused on the latter alternative. The overarching aims of this project have been to demonstrate the need for reformate purification for different applications, and then, to investigate different available methods that can be used in order to enable the requested gas clean-up. The different purification methods have been examined with respect to parameters such as operating conditions (temperature, pressure), impurity tolerance, size, weight and cost. Another goal of the project has been to investigate how the reformer fuel type used influences the reformate gas quality and hence, the need for gas purification before the reformate can be fed to e.g. a low temperature polymer membrane fuel cell (PEMFC). For this reason, some experimental work has been performed. First, analysis of the reformate gas composition when natural gas, LPG, gasoline, diesel, kerosene (low and high S-concentration (i.e. JP8)) and ethanol have been processed. The reformation tests were carried out in a small scale reformer unit ({approx} 1 kW H{sub 2}) including Catator's catalyst formulations developed for the steam reforming, the water gas shift and the preferential oxidation reaction, respectively. Verification tests, with synthetic gas blends, including different potential reformate impurities, and with real reformate gas were thereafter performed with a commercial 4-cell PEMFC stack (3-5 W). Finally, some examination and also to some extent further development of Catator's existing gas purification units were made, i.e. chemical (WGS, PROX) and physical (regenerative adsorption). The Pd-alloy membrane seems to be the obvious choice of purification

Autothermal reforming catalyst having perovskite structure

Science.gov (United States)

Krumpel, Michael [Naperville, IL; Liu, Di-Jia [Naperville, IL

2009-03-24

The invention addressed two critical issues in fuel processing for fuel cell application, i.e. catalyst cost and operating stability. The existing state-of-the-art fuel reforming catalyst uses Rh and platinum supported over refractory oxide which add significant cost to the fuel cell system. Supported metals agglomerate under elevated temperature during reforming and decrease the catalyst activity. The catalyst is a perovskite oxide or a Ruddlesden-Popper type oxide containing rare-earth elements, catalytically active firs row transition metal elements, and stabilizing elements, such that the catalyst is a single phase in high temperature oxidizing conditions and maintains a primarily perovskite or Ruddlesden-Popper structure under high temperature reducing conditions. The catalyst can also contain alkaline earth dopants, which enhance the catalytic activity of the catalyst, but do not compromise the stability of the perovskite structure.

Power's promise: electricity reforms in Eastern Europe and Central Asia, vol. 1

Energy Technology Data Exchange (ETDEWEB)

Lampietti, J. (ed.)

2004-06-01

This study analyzes the fiscal, efficiency, social, and environmental impact of power sector reforms in seven countries in the Europe and East Asia region - Armenia; Azerbaijan; Georgia; Hungary; Kazakhstan and POland. It finds sector deficits have been falling over the last decade and that the savings from lower sector deficits did not translate into higher social spending. More emphasis must be placed on monitoring deficits and tailoring policy reform to country specific circumstances. The impact of reform on utility efficiency, as measured by the cost of generation, system loss collections, and operational efficiency, is ambiguous. While overall revenue per kilowatt hour increased in almost all countries, problems continue with losses, collection rates, and staffing. In terms of social impacts, electricity spending as a share of income increased, especially for the poor, while consumption stayed the same. In terms of environmental impacts, reforms did slightly improve energy efficiency in power plants though this has little direct impact on human health because the electricity sector's share of the total health damage from air pollution is negligible. Several lessons emerge from the analysis. Undertaking simple ex ante simulations of reform impacts will allow better identification of potential reform benefits and costs. Placing more emphasis on outcome-based indicators of service quality would help ensure that future operations produce the intended end-user benefits. In many cases, tariff increases can and should be explicitly timed to coincide with service quality improvements. 24 figs., 15 tabs., 10 annexes.

Investigation of methane steam reforming in planar porous support of solid oxide fuel cell

International Nuclear Information System (INIS)

Yang Yongping; Du Xiaoze; Yang Lijun; Huang Yuan; Xian Haizhen

2009-01-01

Adopting the porous support in integrated-planar solid oxide fuel cell (IP-SOFC) can reduce the operating temperature by reducing thickness of electrolyte layer, and also, provide internal reforming environment for hydrogen-rich fuel gas. The distributions of reactant and product components, and temperature of methane steam reforming for IP-SOFC were investigated by the developed physical and mathematical model with thermodynamic analysis, in which eleven possible reaction mechanisms were considered by the source terms and Arrhenius relationship. Numerical simulation of the model revealed that the progress of reforming reaction and the distribution of the product, H 2 , were influenced by the operating conditions, included that of temperature, ratio of H 2 O and CH 4 , as well as by the porosity of the supporting material. The simulating results indicate that the methane conversion rate can reach its maximum value under the operating temperature of 800 deg. C and porosity of ε = 0.4, which rather approximate to the practical operating conditions of IP-SOFC. In addition, characteristics of carbon deposition on surface of catalyst were discussed under various operating conditions and configuration parameters of the porous support. The present works provided some theoretical explanations to the numerous experimental observations and engineered practices

Less sensitive electrocatalysts towards carbon monoxide for PEMFC fed by hydrogen produced from reforming gas; Recherche de catalyseurs peu sensibles a la presence de monoxyde de carbone pour piles a combustible PEMFC alimentees en gaz de reformage

Energy Technology Data Exchange (ETDEWEB)

Boucher, A.C.

2002-11-15

The aim of this work was to prepare bimetallic catalysts based on platinum to elaborate anodes for fuel cells fed by hydrogen produced from reforming gas and containing thus some ppm of carbon monoxide. In order to avoid platinum poisoning, another metal, such as tin, was added. This leads to a more tolerant material to CO. A Pt-Sn catalyst supported on Vulcan XC-72 carbon was prepared by a chemical route, using a platinum carbonyl complex. This material was characterized by physical and chemical methods which indicate that it is formed by nano-structured Pt{sub 3}Sn particles. These particles have a narrow size distribution with a mean diameter of approximately 2 nm. Its activity towards CO, particularly under fuel cell conditions, was compared with a similar commercial E-TEK catalyst. This study shows that the catalyst prepared from the carbonyl precursor is less sensitive to CO than the commercial one. (author)

Plasma-catalytic reforming of ethanol: influence of air activation rate and reforming temperature

International Nuclear Information System (INIS)

Nedybaliuk, O.A.; Chernyak, V.Ya.; Fedirchuk, I.I.; Demchina, V.P.; Bortyshevsky, V.A.; Korzh, R.V.

2016-01-01

This paper presents the study of the influence that air activation rate and reforming temperature have on the gaseous products composition and conversion efficiency during the plasma-catalytic reforming of ethanol. The analysis of product composition showed that the conversion efficiency of ethanol has a maximum in the studied range of reforming temperatures. Researched system provided high reforming efficiency and high hydrogen energy yield at the lower temperatures than traditional conversion technologies

Influence of Steam Reforming Catalyst Geometry on the Performance of Tubular Reformer – Simulation Calculations

Directory of Open Access Journals (Sweden)

Franczyk Ewelina

2015-06-01

Full Text Available A proper selection of steam reforming catalyst geometry has a direct effect on the efficiency and economy of hydrogen production from natural gas and is a very important technological and engineering issue in terms of process optimisation. This paper determines the influence of widely used seven-hole grain diameter (ranging from 11 to 21 mm, h/d (height/diameter ratio of catalyst grain and Sh/St (hole surface/total cylinder surface in cross-section ratio (ranging from 0.13 to 0.37 on the gas load of catalyst bed, gas flow resistance, maximum wall temperature and the risk of catalyst coking. Calculations were based on the one-dimensional pseudo-homogeneous model of a steam reforming tubular reactor, with catalyst parameters derived from our investigations. The process analysis shows that it is advantageous, along the whole reformer tube length, to apply catalyst forms of h/d = 1 ratio, relatively large dimensions, possibly high bed porosity and Sh/St ≈ 0.30-0.37 ratio. It enables a considerable process intensification and the processing of more natural gas at the same flow resistance, despite lower bed activity, without catalyst coking risk. Alternatively, plant pressure drop can be reduced maintaining the same gas load, which translates directly into diminishing the operating costs as a result of lowering power consumption for gas compression.

Electricity market reform failures: UK, Norway, Alberta and California

International Nuclear Information System (INIS)

Chikeung Woo; Lloyd, Debra; Tishler, Asher

2003-01-01

An analysis of electricity market reforms already taken place in the UK, Norway, Alberta (Canada) and California (USA) leads to our overall conclusion that the introduction of a competitive generation market, of itself, has failed to deliver reliable service at low and stable prices. The market reform failures are attributed to market power abuse by few dominant sellers (especially at times of transmission congestion), poor market design that invites strategic bidding by suppliers, the lack of customer response to price spikes, capacity shortage caused by demand growth not matched by new capacity, and thin trading of forward and futures contracts that are critical for price discovery and risk management. The paper then explains why an electricity market reform can easily fail to deliver the promised gains of better service at lower and more stable prices. The policy implication is that an electric market reform can be extremely risky, and may lead to a disastrous outcome. Thus, it is imprudent to implement such a reform in countries with limited sites for new generation and no indigenous fuels (e.g., Israel and Hong Kong). These countries should therefore consider introducing performance-based regulation that can immediately benefit electricity consumers in terms of lower prices, more stable prices, improved reliability, more choices, while encouraging the electric sector to pursue efficient operation and investment. (Author)

Bourdieu, Department Chairs and the Reform of Science Education

Science.gov (United States)

Melville, Wayne; Hardy, Ian; Bartley, Anthony

2011-11-01

Using the insights of the French sociologist, Pierre Bourdieu, this article considers the role of the science department chair in the reform of school science education. Using Bourdieu's 'thinking tools' of 'field', 'habitus' and 'capital', we case study the work of two teachers who both actively pursue the teaching and learning of science as inquiry. One teacher, Dan, has been a department chair since 2000, and has actively encouraged his department to embrace science as inquiry. The other teacher, Leslie, worked for one year in Dan's department before being transferred to another school where science teaching continues to be more traditional. Our work suggests that there are three crucial considerations for chairs seeking to lead the reform of science teaching within their department. The first of these is the development of a reform-minded habitus, as this appears to be foundational to the capital that can be expended in the leadership of reform. The second is an understanding of how to wield power and position in the promotion of reform. The third is the capacity to operate simultaneously and strategically within, and across, two fields; the departmental field and the larger science education field. This involves downplaying administrative logics, and foregrounding more inquiry-focused logics as a vehicle to challenge traditional science-teaching dispositions-the latter being typically dominated by concerns about curriculum 'coverage'.

Electricity market reform failures: UK, Norway, Alberta and California

International Nuclear Information System (INIS)

Woo, C.-K.; Lloyd, Debra; Tishler, Asher

2003-01-01

An analysis of electricity market reforms already taken place in the UK, Norway, Alberta (Canada) and California (USA) leads to our overall conclusion that the introduction of a competitive generation market, of itself, has failed to deliver reliable service at low and stable prices. The market reform failures are attributed to market power abuse by few dominant sellers (especially at times of transmission congestion), poor market design that invites strategic bidding by suppliers, the lack of customer response to price spikes, capacity shortage caused by demand growth not matched by new capacity, and thin trading of forward and futures contracts that are critical for price discovery and risk management. The paper then explains why an electricity market reform can easily fail to deliver the promised gains of better service at lower and more stable prices. The policy implication is that an electric market reform can be extremely risky, and may lead to a disastrous outcome. Thus, it is imprudent to implement such a reform in countries with limited sites for new generation and no indigenous fuels (e.g., Israel and Hong Kong). These countries should therefore consider introducing performance-based regulation that can immediately benefit electricity consumers in terms of lower prices, more stable prices, improved reliability, more choices, while encouraging the electric sector to pursue efficient operation and investment

China's power sector reforms - where to next?

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-12-15

With the fastest growing energy demand in the world, China is now the largest electricity consumer after the United States. How can the government best assure affordable and environmentally sustainable electricity supply in the future? The Chinese government has initiated electricity sector reforms to overhaul an antiquated system and attain new energy security and environmental objectives. How China proceeds with these reforms will have lasting consequences, both locally and globally. Assessing the current state of electricity regulation in China, this report draws on experience elsewhere to explore how better to develop and communicate strategy, how to moderate growth in demand through increased efficiency, how to integrate environmental goals into planning and operation, how to ensure sufficient supply when and where it is needed, and how to handle institutional and governance challenges. In this respect, electricity sector reform in other countries offers valuable lessons as to how China might proceed.

Small School Reform

Directory of Open Access Journals (Sweden)

Carroll E. Bronson

2013-05-01

Full Text Available This qualitative ethnographic case study explored the evolution of a public urban high school in its 3rd year of small school reform. The study focused on how the high school proceeded from its initial concept, moving to a small school program, and emerging as a new small high school. Data collection included interviews, observations, and document review to develop a case study of one small high school sharing a multiplex building. The first key finding, “Too Many Pieces, Not Enough Glue,” revealed that the school had too many new programs starting at once and they lacked a clear understanding of their concept and vision for their new small school, training on the Montessori philosophies, teaching and learning in small schools, and how to operate within a teacher-cooperative model. The second key finding, “A Continuous Struggle,” revealed that the shared building space presented problems for teachers and students. District policies remain unchanged, resulting in staff and students resorting to activist approaches to get things done. These findings offer small school reform leaders suggestions for developing and sustaining a small school culture and cohesion despite the pressures to revert back to top-down, comprehensive high school norms.

The california electricity reform debacle

International Nuclear Information System (INIS)

Jaccard, M.

2001-01-01

In 1998, California launched a dramatic reform of its electricity sector, vertically de-integrating its major utilities and establishing a competitive generation market, with separate entities responsible for grid control and power exchange. After two uneventful years, wholesale prices rose dramatically in the summer of 2000 and have remained high into 2001. An imbalance between the high wholesale prices and frozen retail rates caused a financial crisis for the electric utilities and power shortages have been a chronic threat. Several factors contributed to this crisis: capacity has not expanded in step with demand either in California or its larger trading region; extreme weather and poorly timed plant outages further increased demand and decreased supply; market design flaws allowed significant suppliers to influence the market while frozen retail rates limited the demand response that would have mitigated the supply-demand imbalance. State and federal agencies have taken corrective action but the situation may remain critical for some time. Longer term solutions involve recognizing the special characteristics of electricity in designing marking reform. Because electricity supply and demand must be instantaneously balanced at all times, market reform must ensure that someone has the responsibility and effective tools to ensure that this occurs, in spite of unforeseen circumstances, and to prevent the exercise of market power. Because a competitive commodity market must work in concert with a monopoly delivery system, someone must be responsible and have the means to develop and operate the grid in ways that are amenable to effective competition. Finally, reform design must ensure that the cyclical investment and price patterns of normal commodity markets are minimized in the electricity market and that when they do occur, market volatility does not compromise reliability and price stability for those who value these highly and would pay a premium for them

Development of a methanol reformer for fuel cell vehicles

Energy Technology Data Exchange (ETDEWEB)

Lindstroem, Baard

2003-03-01

Vehicles powered by fuel cells are from an environmental aspect superior to the traditional automobile using internal combustion of gasoline. Power systems which are based upon fuel cell technology require hydrogen for operation. The ideal fuel cell vehicle would operate on pure hydrogen stored on-board. However, storing hydrogen on-board the vehicle is currently not feasible for technical reasons. The hydrogen can be generated on-board using a liquid hydrogen carrier such as methanol and gasoline. The objective of the work presented in this thesis was to develop a catalytic hydrogen generator for automotive applications using methanol as the hydrogen carrier. The first part of this work gives an introduction to the field of methanol reforming and the properties of a fuel cell based power system. Paper I reviews the catalytic materials and processes available for producing hydrogen from methanol. The second part of this thesis consists of an experimental investigation of the influence of the catalyst composition, materials and process parameters on the activity and selectivity for the production of hydrogen from methanol. In Papers II-IV the influence of the support, carrier and operational parameters is studied. In Paper V an investigation of the catalytic properties is performed in an attempt to correlate material properties with performance of different catalysts. In the third part of the thesis an investigation is performed to elucidate whether it is possible to utilize oxidation of liquid methanol as a heat source for an automotive reformer. In the study which is presented in Paper VI a large series of catalytic materials are tested and we were able to minimize the noble metal content making the system more cost efficient. In the final part of this thesis the reformer prototype developed in the project is evaluated. The reformer which was constructed for serving a 5 k W{sub e} fuel cell had a high performance with near 100 % methanol conversion and CO

A low-temperature partial-oxidation-methanol micro reformer with high fuel conversion rate and hydrogen production yield

International Nuclear Information System (INIS)

Wang, Hsueh-Sheng; Huang, Kuo-Yang; Huang, Yuh-Jeen; Su, Yu-Chuan; Tseng, Fan-Gang

2015-01-01

Highlights: • A low-operating temperature of the POM-mode micro methanol reformer is obtained. • The effect of channel design on the performance is studied. • The effect of solid content and binder’ ratio on the performance is studied. • The centrifugal process is benefit for the modification of performance. • 98% of methanol conversion rate of the micro reformer can be obtained at 180 °C. - Abstract: A partial oxidation methanol micro reformer (POM-μReformer) with finger-shaped channels for low operating temperature and high conversing efficiency is proposed in this study. The micro reformer employs POM reaction for low temperature operation (less than 200 °C), exothermic reaction, and quick start-up, as well as air feeding capability; and the finger type reaction chambers for increasing catalyst loading as well as reaction area for performance enhancement. In this study, centrifugal technique was introduced to assist on the catalyst loading with high amount and uniform distribution. The solid content (S), binder’s ratio (B), and channel design (the ratio between channel’s length and width, R) were investigated in detail to optimize the design parameters. Scanning electron microscopy (SEM), gas chromatography (GC), and inductively coupled plasma-mass spectrometer (ICP-MS) were employed to analyze the performance of the POM-μReformer. The result depicted that the catalyst content and reactive area could be much improved at the optimized condition, and the conversion rate and hydrogen selectivity approached 97.9% and 97.4%, respectively, at a very low operating temperature of 180 °C with scarce or no binder in catalyst. The POM-μReformer can supply hydrogen to fuel cells by generating 2.23 J/min for 80% H 2 utilization and 60% fuel cell efficiency at 2 ml/min of supplied reactant gas, including methanol, oxygen and argon at a mixing ratio of 12.2%, 6.1% and 81.7%, respectively

The reform of the Swedish electricity market

International Nuclear Information System (INIS)

Petsala, B.

1995-01-01

The objective of the ongoing reform of deregulation of the electricity market in Sweden is to create and improve the prerequisites for more efficient use of the generation and distribution, thus bringing about a more efficient price building. Similar reforms take place in the other Nordic countries. As a result of these changes the possibilities for international trade in electricity increases considerably. Tendencies towards concentration of production and distribution as well as increased vertical integration make it important for the State to monitor the development and if necessary suggest measures to counteract possible undesired effects. The national character of the former electricity market does no longer constitute a restriction to trade and the power companies already operate in each other's market. (author). 2 figs., 4 tabs., 6 refs

Reforming science: methodological and cultural reforms.

Science.gov (United States)

Casadevall, Arturo; Fang, Ferric C

2012-03-01

Contemporary science has brought about technological advances and an unprecedented understanding of the natural world. However, there are signs of dysfunction in the scientific community as well as threats from diverse antiscience and political forces. Incentives in the current system place scientists under tremendous stress, discourage cooperation, encourage poor scientific practices, and deter new talent from entering the field. It is time for a discussion of how the scientific enterprise can be reformed to become more effective and robust. Serious reform will require more consistent methodological rigor and a transformation of the current hypercompetitive scientific culture.

Evaluation of an integrated methane autothermal reforming and high-temperature proton exchange membrane fuel cell system

International Nuclear Information System (INIS)

Authayanun, Suthida; Saebea, Dang; Patcharavorachot, Yaneeporn; Arpornwichanop, Amornchai

2015-01-01

The aim of this study was to investigate the performance and efficiency of an integrated autothermal reforming and HT-PEMFC (high-temperature proton exchange membrane fuel cell) system fueled by methane. Effect of the inclusion of a CO (carbon monoxide) removal process on the integrated HT-PEMFC system was considered. An increase in the S/C (steam-to-carbon) ratio and the reformer temperature can enhance the hydrogen fraction while the CO formation reduces with increasing S/C ratio. The fuel processor efficiency of the methane autothermal reformer with a WGS (water gas shift reactor) reactor, as the CO removal process, is higher than that without a WGS reactor. A higher fuel processor efficiency can be obtained when the feed of the autothermal reformer is preheated to the reformer temperature. Regarding the cell performance, the reformate gas from the methane reformer operated at T in  = T R and with a high S/C ratio is suitable for the HT-PEMFC system without a WGS reactor. When considering the HT-PEMFC system with a WGS reactor, the CO poisoning has less significant impact on the cell performance and the system can be operated over a broader range to minimize the required total active area. A WGS reactor is necessary for the methane autothermal reforming and HT-PEMFC integrated system with regard to the system efficiency. - Highlights: • An integrated autothermal reforming and HT-PEMFC system was studied. • The HT-PEMFC system with and without a CO removal process was considered. • Parametric analysis was performed to obtain a high system efficiency. • The HT-PEMFC system with the WGS reactor can be run over a broader range. • The efficiencies of the HT-PEMFC systems without and with a WGS reactor were reported

Bible reading in Africa: the shaping of a reformed perspective

Directory of Open Access Journals (Sweden)

B. Wielenga

2010-07-01

Full Text Available In this article I try to develop a reformed perspective on Bible reading in Africa by ordinary readers. I explore the concept of ordinary readers in the context of recent hermeneutical discus-sions, and of the differences between their mode of reading and that of biblical scholars against the background ofthe reality of the oral or semi-literate cultures of Africa. A reformed perspec-tive, with its emphasis on the church as locus for Bible reading under the operation of the Holy Spirit, opens up a way forward out of the dilemma between ordinary and professional Bible reading. A reformed perspective can also clear the way for a gender-sensitive reading of the Bible in a continent where most Bible readers are women. This requires from those who read the Bible together an attitude of humility.

Performance evaluation of a proof-of-concept 70 W internal reforming methanol fuel cell system

Science.gov (United States)

Avgouropoulos, G.; Schlicker, S.; Schelhaas, K.-P.; Papavasiliou, J.; Papadimitriou, K. D.; Theodorakopoulou, E.; Gourdoupi, N.; Machocki, A.; Ioannides, T.; Kallitsis, J. K.; Kolb, G.; Neophytides, S.

2016-03-01

A proof-of-concept 70 W Internal Reforming Methanol Fuel Cell (IRMFC) stack including Balance-of-Plant (BoP) was designed, assembled and tested. Advent TPS® high-temperature, polymer electrolyte membrane electrode assemblies were employed for fuel cell operation at 200 °C. In order to avoid phosphoric acid poisoning of the reformer, the anode electrocatalyst of each cell was indirectly adjoined, via a separation plate, to a highly active CuMnAlOx catalyst coated onto copper foam, which served as methanol reforming layer. The reformer was in-situ converting the methanol/steam feed to the required hydrogen (internal reforming concept) at 200 °C, which was readily oxidized at the anode electrodes. The operation of the IRMFC was supported through a number of BoP components consisting of a start-up subsystem (air blower, evaporator and monolithic burner), a combined afterburner/evaporator device, methanol/water supply and data acquisition units (reactants/products analysis, temperature control, flow control, system load/output control). Depending on the composition of the liquid MeOH/H2O feed streams, current densities up to 0.18 A cm-2 and power output up to 70 W could be obtained with remarkable repeatability. Specific targets for improvement of the efficiency were identified.

Summary of the financial and ratepayer impacts of nuclear power plant regulatory reform

International Nuclear Information System (INIS)

Turpin, A.Y.

1985-05-01

This report estimates the financial impact on utilities and ratepayers of nuclear power plant regulatory reforms. Three situations are investigated: (1) no reform, (2) combined early-site-permit and preapproval-of-design reforms, and (3) total reform. Also, two types of capacity additions are evaluated using two utility companies as case studies: (1) nuclear plus generic capacity, and (2) all-nuclear capacity. Results indicate that both the shorter construction lead-time afforded by nuclear regulatory reform and the timing of new capacity additions are extremely important in enabling a utility to remain in a healthy financial position while adding capacity to meet future demand and at the same time reducing the price of electricity to the ratepayers. The lower added capital costs and fuel cost savings obtained from reformed nuclear units allow a utility dependent on oil and gas steam generation to experience price decreases as these new units begin commercial operation. The study also points out that in simulations excluding the shorter lead-time generic capacity, price increases were greater and financial performance was worse for both utilities. These facts indicate the importance of shortening the construction lead-time through nuclear regulatory reform so that nuclear power will be more competitive with coal. 19 refs., 4 figs., 3 tabs

Strengthening the management of ESA - the Inter-Directorate Reform of Corporate and Risk Management

Science.gov (United States)

Feustel-Büechl, Jörg; Arend, Harald; Derio, Eric; Infante, Giovanni; Kreiner, Gerhard; Phaler, Jesse; Tabbert, Michael

2007-02-01

ESA has undertaken the Inter-Directorate Reform of Corporate and Risk Management to strengthen the Agency's internal operations. The reform was completed at the end of 2006, encompassing five dedicated projects on Risk Management, Agency-Wide Controlling System, Project Plan and Integrated Project Review, General Budget Structure and Charging Policy, and Corporate Information Systems. It has contributed to improved management of the Agency's internal operations by engaging all internal stakeholders in a common objective, introducing improvements to planning and management methods, elaborating consolidated information structures and tools, contributing to enhanced transparency and accountability, and by providing qualified new policies, processes and tools.

Study on Serum Lipoprotein Profile of Exclusive Breast Fed, Mixed Fed and Formula Fed Preterm Infants

Directory of Open Access Journals (Sweden)

Vineet Jaiswal

2017-10-01

Full Text Available Introduction: Breast feeding is protective for atherosclerotic cardiovascular disease, obesity, Diabetes Mellitus (DM and hypertension. Serum lipoprotein is principal risk factor for atherosclerosis. There is growing evidence that risk of Coronary Heart Disease (CHD begins to emerge from infancy. Lipoprotein level is affected by different feeding pattern during infancy. Aim: To compare serum lipoprotein profile of exclusively breast fed, mixed fed and formula fed preterm infant. Materials and Methods: A total of two fifty preterm newborn were recruited at birth and divided into three groups. Group A were Exclusively Breast Fed (EBF, Group B were Mixed Fed (MF and Group C were Formula/bovine milk Fed (FF infants. Preterm newborns with severe sepsis, hypoglycemia, Hypoxic Ischemic Encephalopathy (HIE stage II and III, meconium stained amniotic fluid, pathological jaundice, Hyaline Membrane Disease (HMD, less than 28 weeks gestation, with major congenital anomaly and infants born to mothers with DM, gestational diabetes, hypertension, pre-eclampsia, eclampsia or on long term medications were excluded from the study. Lipoprotein profile estimation was done at four weeks and again at 16 weeks of age. Results: At four weeks of age, Total Cholesterol (TC, Triglyceride (TG, Low Density Lipoprotein (LDL and Very Low Density Lipoprotein (VLDL were higher in EBF infants as compared to MF and FF infants. For TC, difference was significant between EBF vs. MF (p<0.001, EBF vs. FF (p<0.001 and MF vs. FF (p=0.005 infants. At 16 weeks also, TC and HDL were higher in EBF infants as compared to MF and FF infants. For TC, this difference was significant between EBF vs. MF (p<0.001 and EBF vs. FF (p<0.001 infants. When infants were followed up to 16 weeks of age, TC and LDL level fell significantly (p<0.001 in EBF and MF group, a significant (p<0.05 rise for TC was seen in FF group. At 16 weeks of age, there was no significant rise in HDL in EBF infants, but

Reform Drivers and Reform Obstacles in Natural Resource Management

DEFF Research Database (Denmark)

Gezelius, Stig S.; Raakjær, Jesper; Hegland, Troels Jacob

2010-01-01

ABSTRACT: The ability to transform historical learning into institutional reform is a key to success in the management of common pool natural resources. Based on a model of institutional inertia and a comparative analysis of Northeast Atlantic fisheries management from 1945 to the present....... Institutional inertia entails that large-scale management reform tends to be crisis driven....

Hydrogen-rich gas production from waste plastics by pyrolysis and low-temperature steam reforming over a ruthenium catalyst

International Nuclear Information System (INIS)

Namioka, Tomoaki; Saito, Atsushi; Inoue, Yukiharu; Park, Yeongsu; Min, Tai-jin; Roh, Seon-ah; Yoshikawa, Kunio

2011-01-01

Operating conditions for low-temperature pyrolysis and steam reforming of plastics over a ruthenium catalyst were investigated. In the range studied, the highest gas and lowest coke fractions for polystyrene (PS) with a 60 g h -1 scale, continuous-feed, two-stage gasifier were obtained with a pyrolyzer temperature of 673 K, steam reforming temperature of 903 K, and weight hourly space velocity (WHSV) of 0.10 g-sample g-catalyst -1 h -1 . These operating conditions are consistent with optimum conditions reported previously for polypropylene. Our results indicate that at around 903 K, the activity of the ruthenium catalyst was high enough to minimize the difference between the rates of the steam reforming reactions of the pyrolysates from polystyrene and polypropylene. The proposed system thus has the flexibility to compensate for differences in chemical structures of municipal waste plastics. In addition, the steam reforming temperature was about 200 K lower than the temperature used in a conventional Ni-catalyzed process for the production of hydrogen. Low-temperature steam reforming allows for lower thermal input to the steam reformer, which results in an increase in thermal efficiency in the proposed process employing a Ru catalyst. Because low-temperature steam reforming can be also expected to reduce thermal degradation rates of the catalyst, the pyrolysis-steam reforming process with a Ru catalyst has the potential for use in small-scale production of hydrogen-rich gas from waste plastics that can be used for power generation.

Development of a solid oxide fuel cell (SOFC) automotive auxiliary power unit (APU) fueled by gasoline

International Nuclear Information System (INIS)

DeMinco, C.; Mukerjee, S.; Grieve, J.; Faville, M.; Noetzel, J.; Perry, M.; Horvath, A.; Prediger, D.; Pastula, M.; Boersma, R.; Ghosh, D.

2000-01-01

This paper describes the design and the development progress of a 3 to 5 auxiliary power unit (APU) based on a gasoline fueled solid oxide fuel cell (SOFC). This fuel cell was supplied reformate gas (reactant) by a partial oxidation (POx) catalytic reformer utilizing liquid gasoline and designed by Delphi Automotive Systems. This reformate gas consists mainly of hydrogen, carbon monoxide and nitrogen and was fed directly in to the SOFC stack without any additional fuel reformer processing. The SOFC stack was developed by Global Thermoelectric and operates around 700 o C. This automotive APU produces power to support future 42 volt vehicle electrical architectures and loads. The balance of the APU, designed by Delphi Automotive Systems, employs a packaging and insulation design to facilitate installation and operation on-board automobiles. (author)

Thermal and structural limitations for impurity-control components in FED/INTOR

International Nuclear Information System (INIS)

Majumdar, S.; Cha, Y.; Mattas, R.; Abdou, M.; Cramer, B.; Haines, J.

1983-02-01

The successful operation of the impurity-control system of the FED/INTOR will depend to a large extent on the ability of its various components to withstand the imposed thermal and mechanical loads. The present paper explores the thermal and stress analyses aspects of the limiter and divertor operation of the FED/INTOR in its reference configuration. Three basic limitations governing the design of the limiter and the divertor are the maximum allowable metal temperature, the maximum allowable stress intensity and the allowable fatigue life of the structural material. Other important design limitations stemming from sputtering, evaporation, melting during disruptions, etc. are not considered in the present paper. The materials considered in the present analysis are a copper and a vanadium alloy for the structural material and graphite, beryllium, beryllium oxide, tungsten and silicon carbide for the coating or tile material

Design of the steam reformer for the HTR-10 high temperature process heat application

International Nuclear Information System (INIS)

Ju Huaiming; Xu Yuanhui; Jia Haijun

2000-01-01

The 10 MW High Temperature Reactor Test Module (HTR-10) is being constructed now and planned to be operational in 2000. One of the objectives is to develop the high temperature process heat application. The methane steam reformer is one of the key-facilities for the nuclear process heat application system. The paper describes the conceptual design of the HTR-10 Steam Reformer with He heating, and the design optimization computer code. It can be used to perform sensitivity analysis for parameters, and to improve the design. Principal parameters and construction features of the HTR-10 reformer heated by He are introduced. (author)

The indonesia’s Police Reform Police in the Reform Era New Institutionalism Perspective

Directory of Open Access Journals (Sweden)

ACHMAD NURMAND

2016-05-01

Full Text Available Since the reformation and democratization movement in 1998, Indonesians have faced a chronic corruption problem. At the beginning of reformation era in 1998 to fight against corruption, the Indonesian government reforms the organization structure of the Indonesia Police to be an independent body separated from the Military organization. The police reforms begun in 1999 and got legal foundation with Act No. 2/2002. However, since fourteen years, the level of police reform has not yet succeed because of low community satisfaction on police service and the intense conflicts always occur whenever ACA investigates the case of corruptions conducted by police leaders. Three conflicts between police institution and ACA have taken placed. By using institutionalism approach, this research focus on the reform in police themselves are major actors on how reforms are organized and managed. This study is interpretative in nature gained only through social constructions such as language, consciousness, shared meanings, documents, tools, and other artefacts’. This finding revealed that this unsuccessful institutionalization process took place in a context of the main task of police for communicty service. Second, the study has demonstrated that three concepts from institutional theory as aforementioned provided vocabularies and insights to explain the phenomenon under study.

Control of variable speed wind turbines with doubly-fed induction generators

Energy Technology Data Exchange (ETDEWEB)

Hansen, A.D.; Soerensen, P.; Iov, F.; Blaabjerg, F.

2005-07-01

The paper presents an overall control method for variable speed pitch controlled wind turbines with doubly-fed induction generators (DFIG). Emphasis is on control strategies and algorithms applied at each hierarchical control level of the wind turbine. The objectives of the control system are: 1) to control the power drawn from the wind turbine in order to track the wind turbine maximum power operation point, 2) to limit the power in case of large wind speeds, and 3) to control the reactive power interchanged between the wind turbine generator and the grid. The present control method is designed for normal continuous operations. The strongest feature of the implemented control method is that it allows the turbine to operate with the optimum power efficiency over a wide range of wind speeds. The model of the variable speed, variable pitch wind turbine with doubly-fed induction generator is implemented in the dynamic power system simulation tool DlgSILENT PowerFactory which allows investigation of the dynamic performance of grid-connected wind turbines within realistic electrical grid models. Simulation results are presented and analysed in different normal operating conditions. (author)

Choice of compressed air fed system of a uranium mine

International Nuclear Information System (INIS)

Li Congkui; Lei Zeyong

2006-01-01

The selection of compressed air fed system in a uranium mine is discussed. The research indicates that the movable air compressor is better than the fixed one in energy saving, once capital cost and operational cost when it is applied in an underground uranium mine. (authors)

Common morality and moral reform.

Science.gov (United States)

Wallace, K A

2009-01-01

The idea of moral reform requires that morality be more than a description of what people do value, for there has to be some measure against which to assess progress. Otherwise, any change is not reform, but simply difference. Therefore, I discuss moral reform in relation to two prescriptive approaches to common morality, which I distinguish as the foundational and the pragmatic. A foundational approach to common morality (e.g., Bernard Gert's) suggests that there is no reform of morality, but of beliefs, values, customs, and practices so as to conform with an unchanging, foundational morality. If, however, there were revision in its foundation (e.g., in rationality), then reform in morality itself would be possible. On a pragmatic view, on the other hand, common morality is relative to human flourishing, and its justification consists in its effectiveness in promoting flourishing. Morality is dependent on what in fact does promote human flourishing and therefore, could be reformed. However, a pragmatic approach, which appears more open to the possibility of moral reform, would need a more robust account of norms by which reform is measured.

Factors affecting science reform: Bridging the gap between reform initiatives and teaching practices

Science.gov (United States)

Pensak, Karl John

In response to the perceived deficiencies in science education today, and to the expressed need for research into the culture of schools (due primarily to the failure of many science reforms in the past), this study used a broad based approach to study the gap between science education research and science education practice. This study identified 47 factors that may encourage or inhibit science curriculum reform. A survey was conducted to determine which factors were perceived to be important by local and national K-12 classroom teachers, science supervisors/coordinators, and college/university professors. Continual staff development (scheduled as part of teachers' work day/week/month), funding (for long-term staff development, teacher training and support, science laboratory facilities and materials), teacher motivation and "ownership" of the reform, the need for collaborative opportunities for classroom teachers, teachers' college preparation, textbook reform, community support, and reform initiatives that are "in tune" with assessment, are major factors identified as having a substantial affect on the successful adoption, implementation, and institutionalization of science reforms.

Catalytic reforming methods

Science.gov (United States)

Tadd, Andrew R; Schwank, Johannes

2013-05-14

A catalytic reforming method is disclosed herein. The method includes sequentially supplying a plurality of feedstocks of variable compositions to a reformer. The method further includes adding a respective predetermined co-reactant to each of the plurality of feedstocks to obtain a substantially constant output from the reformer for the plurality of feedstocks. The respective predetermined co-reactant is based on a C/H/O atomic composition for a respective one of the plurality of feedstocks and a predetermined C/H/O atomic composition for the substantially constant output.

Health sector reforms and human resources for health in Uganda and Bangladesh: mechanisms of effect

Directory of Open Access Journals (Sweden)

Kielmann Tara

2007-02-01

Full Text Available Abstract Background Despite the expanding literature on how reforms may affect health workers and which reactions they may provoke, little research has been conducted on the mechanisms of effect through which health sector reforms either promote or discourage health worker performance. This paper seeks to trace these mechanisms and examines the contextual framework of reform objectives in Uganda and Bangladesh, and health workers' responses to the changes in their working environments by taking a 'realistic evaluation' approach. Methods The study findings were generated by triangulating both qualitative and quantitative methods of data collection and analysis among policy technocrats, health managers and groups of health providers. Quantitative surveys were conducted with over 700 individual health workers in both Bangladesh and Uganda and supplemented with qualitative data obtained from focus group discussions and key interviews with professional cadres, health managers and key institutions involved in the design, implementation and evaluation of the reforms of interest. Results The reforms in both countries affected the workforce through various mechanisms. In Bangladesh, the effects of the unification efforts resulted in a power struggle and general mistrust between the two former workforce tracts, family planning and health. However positive effects of the reforms were felt regarding the changes in payment schemes. Ugandan findings show how the workforce responded to a strong and rapidly implemented system of decentralisation where the power of new local authorities was influenced by resource constraints and nepotism in recruitment. On the other hand, closer ties to local authorities provided the opportunity to gain insight into the operational constraints originating from higher levels that health staff were dealing with. Conclusion Findings from the study suggest that a reform planners should use the proposed dynamic responses model to

Sorption-enhanced steam methane reforming in fluidized bed reactors

Energy Technology Data Exchange (ETDEWEB)

Johnsen, Kim

2006-10-15

Hydrogen is considered to be an important potential energy carrier; however, its advantages are unlikely to be realized unless efficient means can be found to produce it without generation of CO{sub 2}. Sorption-enhanced steam methane reforming (SE-SMR) represent a novel, energy-efficient hydrogen production route with in situ CO{sub 2} capture, shifting the reforming and water gas shift reactions beyond their conventional thermodynamic limits. The use of fluidized bed reactors for SE-SMR has been investigated. Arctic dolomite, a calcium-based natural sorbent, was chosen as the primary CO{sub 2}-acceptor in this study due to high absorption capacity, relatively high reaction rate and low cost. An experimental investigation was conducted in a bubbling fluidized bed reactor of diameter 0.1 m, which was operated cyclically and batch wise, alternating between reforming/carbonation conditions and higher-temperature calcination conditions. Hydrogen concentrations of >98 mole% on a dry basis were reached at 600 C and 1 atm, for superficial gas velocities in the range of {approx}0.03-0.1 m/s. Multiple reforming-regeneration cycles showed that the hydrogen concentration remained at {approx}98 mole% after four cycles. The total production time was reduced with an increasing number of cycles due to loss of CO{sub 2}-uptake capacity of the dolomite, but the reaction rates of steam reforming and carbonation seemed to be unaffected for the conditions investigated. A modified shrinking core model was applied for deriving carbonation kinetics of Arctic dolomite, using experimental data from a novel thermo gravimetric reactor. An apparent activation energy of 32.6 kj/mole was found from parameter fitting, which is in good agreement with previous reported results. The derived rate expression was able to predict experimental conversion up to {approx}30% very well, whereas the prediction of higher conversion levels was poorer. However, the residence time of sorbent in a continuous

Reforming Organizational Structures

NARCIS (Netherlands)

S.G.J. Van de Walle (Steven)

2016-01-01

textabstractPublic sectors have undergone major transformations. Public sector reform touches upon the core building blocks of the public sector: organizational structures, people and finances. These are objects of reform. This chapter presents and discusses a set of major transformations with

Multi-fuel reformers for fuel cells used in transportation. Phase 1: Multi-fuel reformers

Science.gov (United States)

1994-05-01

DOE has established the goal, through the Fuel Cells in Transportation Program, of fostering the rapid development and commercialization of fuel cells as economic competitors for the internal combustion engine. Central to this goal is a safe feasible means of supplying hydrogen of the required purity to the vehicular fuel cell system. Two basic strategies are being considered: (1) on-board fuel processing whereby alternative fuels such as methanol, ethanol or natural gas stored on the vehicle undergo reformation and subsequent processing to produce hydrogen, and (2) on-board storage of pure hydrogen provided by stationary fuel processing plants. This report analyzes fuel processor technologies, types of fuel and fuel cell options for on-board reformation. As the Phase 1 of a multi-phased program to develop a prototype multi-fuel reformer system for a fuel cell powered vehicle, the objective of this program was to evaluate the feasibility of a multi-fuel reformer concept and to select a reforming technology for further development in the Phase 2 program, with the ultimate goal of integration with a DOE-designated fuel cell and vehicle configuration. The basic reformer processes examined in this study included catalytic steam reforming (SR), non-catalytic partial oxidation (POX) and catalytic partial oxidation (also known as Autothermal Reforming, or ATR). Fuels under consideration in this study included methanol, ethanol, and natural gas. A systematic evaluation of reforming technologies, fuels, and transportation fuel cell applications was conducted for the purpose of selecting a suitable multi-fuel processor for further development and demonstration in a transportation application.

75 FR 4310 - Credit Reforms in Organized Wholesale Electric Markets

Science.gov (United States)

2010-01-27

... energy markets, in which regional transmission organizations (RTOs) and independent system operators... require RTOs and ISOs to adopt tariff revisions reflecting these proposed credit reforms. The Commission... is in the organized wholesale electric markets.\\5\\ Individual RTOs and ISOs developed their own...

Solar Reforming of Carbon Dioxide to Produce Diesel Fuel

Energy Technology Data Exchange (ETDEWEB)

Dennis Schuetzle; Robert Schuetzle

2010-12-31

, concentrating solar dish was modified to accommodate the Sunexus CO2 Solar Reformer and the integrated system was installed at the Pacific Renewable Fuels and Chemicals test site at McClellan, CA. Several test runs were conducted without catalyst during which the ceramic heat exchanger in the Sunexus Solar Reformer reached temperatures between 1,050 F (566 C) and 2,200 F (1,204 C) during the test period. A dry reforming mixture of CO2/CH{sub 4} (2.0/1.0 molar ratio) was chosen for all of the tests on the integrated solar dish/catalytic reformer during December 2010. Initial tests were carried out to determine heat transfer from the collimated solar beam to the catalytic reactor. The catalyst was operated successfully at a steady-state temperature of 1,125 F (607 C), which was sufficient to convert 35% of the 2/1 CO2/CH{sub 4} mixture to syngas. This conversion efficiency confirmed the results from laboratory testing of this catalyst which provided comparable syngas production efficiencies (40% at 1,200 F [650 C]) with a resulting syngas composition of 20% CO, 16% H{sub 2}, 39% CO2 and 25% CH{sub 4}. As based upon the laboratory results, it is predicted that 90% of the CO2 will be converted to syngas in the solar reformer at 1,440 F (782 C) resulting in a syngas composition of 50% CO: 43% H{sub 2}: 7% CO2: 0% CH{sub 4}. Laboratory tests show that the higher catalyst operating temperature of 1,440 F (782 C) for efficient conversion of CO2 can certainly be achieved by optimizing solar reactor heat transfer, which would result in the projected 90% CO2-to-syngas conversion efficiencies. Further testing will be carried out during 2011, through other funding support, to further optimize the solar dish CO2 reformer. Additional studies carried out in support of this project and described in this report include: (1) An Assessment of Potential Contaminants in Captured CO2 from Various Industrial Processes and Their Possible Effect on Sunexus CO2 Reforming Catalysts; (2) Recommended

Public Administration reforms and results

Directory of Open Access Journals (Sweden)

Gunnar Helgi Kristinsson

2014-12-01

Full Text Available Research on administrative reforms during the past thirty years indicates that reform efforts of countries differ. The Anglo Saxon states were at the forefront of the New Public Management movement while countries on mainland Europe were more hesitant and moved further towards the Neo-Weberian state. Academics have tried to explain different reform efforts within countries by looking at political, historical and cultural issues, values and economic factors to name just a few. Three hypotheses are put forward to explain reform efforts in different states. This research involves analysing the implementation of two different reform trends, New Public Management and the Neo-Weberian tradition. The analysis indicates that countries vary in their commitment to reform rather than in the emphasis on either New Public Management or the Neo-Weberian State. Decentralization, clear objectives and consultation with communities and experts are closely related to national reform efforts. However, Iceland does distinguish itself from Europe and the Nordic countries. The analysis reveals that although decentralization is high in the Icelandic system, autonomy of agencies does not have a strong relation to a varied use of administrative instruments. The second part of the article focuses on the results and achievements of reform programmes. The achievement of reform programmes are examined in relation to theories of bounded rationality, street level bureaucracy (bottom up and consensus decision making. Three hypotheses are presented and tested to explain what causes reforms programmes to be successful in some countries and not in others. The analysis reveals that countries are more likely to succeed if bounded rationality is applied with careful preparation and when stakeholders are consulted.

High temperature energy storage performances of methane reforming with carbon dioxide in a tubular packed reactor

International Nuclear Information System (INIS)

Lu, Jianfeng; Chen, Yuan; Ding, Jing; Wang, Weilong

2016-01-01

Highlights: • Energy storage of methane reforming in a tubular packed reactor is investigated. • Thermochemical storage efficiency approaches maximum at optimal temperature. • Sensible heat and heat loss play important roles in the energy storage system. • The reaction and energy storage models of methane reforming reactor are established. • The simulated methane conversion and energy storage efficiency fit with experiments. - Abstract: High temperature heat transfer and energy storage performances of methane reforming with carbon dioxide in tubular packed reactor are investigated under different operating conditions. Experimental results show that the methane reforming in tubular packed reactor can efficiently store high temperature thermal energy, and the sensible heat and heat loss besides thermochemical energy storage play important role in the total energy storage process. When the operating temperature is increased, the thermochemical storage efficiency first increases for methane conversion rising and then decreases for heat loss rising. As the operating temperate is 800 °C, the methane conversion is 79.6%, and the thermochemical storage efficiency and total energy efficiency can be higher than 47% and 70%. According to the experimental system, the flow and reaction model of methane reforming is established using the laminar finite-rate model and Arrhenius expression, and the simulated methane conversion and energy storage efficiency fit with experimental data. Along the flow direction, the fluid temperature in the catalyst bed first decreases because of the endothermic reaction and then increases for the heat transfer from reactor wall. As a conclusion, the maximum thermochemical storage efficiency will be obtained under optimal operating temperature and optimal flow rate, and the total energy efficiency can be increased by the increase of bed conductivity and decrease of heat loss coefficient.

Plasma devices for hydrocarbon reformation

KAUST Repository

Cha, Min Suk

2017-02-16

Plasma devices for hydrocarbon reformation are provided. Methods of using the devices for hydrocarbon reformation are also provided. The devices can include a liquid container to receive a hydrocarbon source, and a plasma torch configured to be submerged in the liquid. The plasma plume from the plasma torch can cause reformation of the hydrocarbon. The device can use a variety of plasma torches that can be arranged in a variety of positions in the liquid container. The devices can be used for the reformation of gaseous hydrocarbons and/or liquid hydrocarbons. The reformation can produce methane, lower hydrocarbons, higher hydrocarbons, hydrogen gas, water, carbon dioxide, carbon monoxide, or a combination thereof.

Efficacy and immunogenicity of live-attenuated human rotavirus vaccine in breast-fed and formula-fed European infants.

Science.gov (United States)

Vesikari, Timo; Prymula, Roman; Schuster, Volker; Tejedor, Juan-C; Cohen, Robert; Bouckenooghe, Alain; Damaso, Silvia; Han, Htay Htay

2012-05-01

Rotavirus is the main cause of severe gastroenteritis and diarrhea in infants and young children less than 5 years of age. Potential impact of breast-feeding on the efficacy and immunogenicity of human rotavirus G1P[8] vaccine was examined in this exploratory analysis. Healthy infants (N = 3994) aged 6-14 weeks who received 2 doses of human rotavirus vaccine/placebo according to a 0-1 or 0-2 month schedule were followed for rotavirus gastroenteritis during 2 epidemic seasons. Rotavirus IgA seroconversion rate (anti-IgA antibody concentration ≥ 20 mIU/mL) and geometric mean concentrations were measured prevaccination and 1-2 months post-dose 2. Vaccine efficacy against any and severe rotavirus gastroenteritis was analyzed according to the infants being breast-fed or exclusively formula-fed at the time of vaccination. Antirotavirus IgA seroconversion rate was 85.5% (95% confidence interval [CI]: 82.4-88.3) in breast-fed and 89.2% (95% CI: 84.2-93) in exclusively formula-fed infants; geometric mean concentrations in the respective groups were 185.8 U/mL (95% CI: 161.4-213.9) and 231.5 U/mL (95% CI: 185.9-288.2). Vaccine efficacy was equally high in breast-fed and exclusively formula-fed children in the first season but fell in breast-fed infants in the second rotavirus season. During the combined 2-year efficacy follow-up period, vaccine efficacy against any rotavirus gastroenteritis was 76.2% (95% CI: 68.7-82.1) and 89.8% (95% CI: 77.6-95.9) and against severe rotavirus gastroenteritis 88.4% (95% CI: 81.6-93) and 98.1% (95% CI: 88.2-100) in the breast-fed and exclusively formula-fed infants, respectively. The difference in immunogenicity of human rotavirus vaccine in breast-fed and exclusively formula-fed infants was small. Vaccine efficacy was equally high in breast-fed and exclusively formula-fed children in the first season. Breast-feeding seemed to reduce slightly the efficacy in the second season.

Application of flexible micro temperature sensor in oxidative steam reforming by a methanol micro reformer.

Science.gov (United States)

Lee, Chi-Yuan; Lee, Shuo-Jen; Shen, Chia-Chieh; Yeh, Chuin-Tih; Chang, Chi-Chung; Lo, Yi-Man

2011-01-01

Advances in fuel cell applications reflect the ability of reformers to produce hydrogen. This work presents a flexible micro temperature sensor that is fabricated based on micro-electro-mechanical systems (MEMS) technology and integrated into a flat micro methanol reformer to observe the conditions inside that reformer. The micro temperature sensor has higher accuracy and sensitivity than a conventionally adopted thermocouple. Despite various micro temperature sensor applications, integrated micro reformers are still relatively new. This work proposes a novel method for integrating micro methanol reformers and micro temperature sensors, subsequently increasing the methanol conversion rate and the hydrogen production rate by varying the fuel supply rate and the water/methanol ratio. Importantly, the proposed micro temperature sensor adequately controls the interior temperature during oxidative steam reforming of methanol (OSRM), with the relevant parameters optimized as well.

Application of Flexible Micro Temperature Sensor in Oxidative Steam Reforming by a Methanol Micro Reformer

Directory of Open Access Journals (Sweden)

Yi-Man Lo

2011-02-01

Full Text Available Advances in fuel cell applications reflect the ability of reformers to produce hydrogen. This work presents a flexible micro temperature sensor that is fabricated based on micro-electro-mechanical systems (MEMS technology and integrated into a flat micro methanol reformer to observe the conditions inside that reformer. The micro temperature sensor has higher accuracy and sensitivity than a conventionally adopted thermocouple. Despite various micro temperature sensor applications, integrated micro reformers are still relatively new. This work proposes a novel method for integrating micro methanol reformers and micro temperature sensors, subsequently increasing the methanol conversion rate and the hydrogen production rate by varying the fuel supply rate and the water/methanol ratio. Importantly, the proposed micro temperature sensor adequately controls the interior temperature during oxidative steam reforming of methanol (OSRM, with the relevant parameters optimized as well.

Reforming options for hydrogen production from fossil fuels for PEM fuel cells

Energy Technology Data Exchange (ETDEWEB)

Ersoz, Atilla; Olgun, Hayati [TUBITAK Marmara Research Center, Institute of Energy, Gebze, 41470 Kocaeli (Turkey); Ozdogan, Sibel [Marmara University Faculty of Engineering, Goztepe, 81040 Istanbul (Turkey)

2006-03-09

PEM fuel cell systems are considered as a sustainable option for the future transport sector in the future. There is great interest in converting current hydrocarbon based transportation fuels into hydrogen rich gases acceptable by PEM fuel cells on-board of vehicles. In this paper, we compare the results of our simulation studies for 100kW PEM fuel cell systems utilizing three different major reforming technologies, namely steam reforming (SREF), partial oxidation (POX) and autothermal reforming (ATR). Natural gas, gasoline and diesel are the selected hydrocarbon fuels. It is desired to investigate the effect of the selected fuel reforming options on the overall fuel cell system efficiency, which depends on the fuel processing, PEM fuel cell and auxiliary system efficiencies. The Aspen-HYSYS 3.1 code has been used for simulation purposes. Process parameters of fuel preparation steps have been determined considering the limitations set by the catalysts and hydrocarbons involved. Results indicate that fuel properties, fuel processing system and its operation parameters, and PEM fuel cell characteristics all affect the overall system efficiencies. Steam reforming appears as the most efficient fuel preparation option for all investigated fuels. Natural gas with steam reforming shows the highest fuel cell system efficiency. Good heat integration within the fuel cell system is absolutely necessary to achieve acceptable overall system efficiencies. (author)

Reforming options for hydrogen production from fossil fuels for PEM fuel cells

Science.gov (United States)

Ersoz, Atilla; Olgun, Hayati; Ozdogan, Sibel

PEM fuel cell systems are considered as a sustainable option for the future transport sector in the future. There is great interest in converting current hydrocarbon based transportation fuels into hydrogen rich gases acceptable by PEM fuel cells on-board of vehicles. In this paper, we compare the results of our simulation studies for 100 kW PEM fuel cell systems utilizing three different major reforming technologies, namely steam reforming (SREF), partial oxidation (POX) and autothermal reforming (ATR). Natural gas, gasoline and diesel are the selected hydrocarbon fuels. It is desired to investigate the effect of the selected fuel reforming options on the overall fuel cell system efficiency, which depends on the fuel processing, PEM fuel cell and auxiliary system efficiencies. The Aspen-HYSYS 3.1 code has been used for simulation purposes. Process parameters of fuel preparation steps have been determined considering the limitations set by the catalysts and hydrocarbons involved. Results indicate that fuel properties, fuel processing system and its operation parameters, and PEM fuel cell characteristics all affect the overall system efficiencies. Steam reforming appears as the most efficient fuel preparation option for all investigated fuels. Natural gas with steam reforming shows the highest fuel cell system efficiency. Good heat integration within the fuel cell system is absolutely necessary to achieve acceptable overall system efficiencies.

Constitutional reform as process

OpenAIRE

Schultze, Rainer-Olaf (Prof.)

2000-01-01

Constitutional reform as process. - In: The politics of constitutional reform in North America / Rainer-Olaf Schultze ... (eds.). - Opladen : Leske + Budrich, 2000. - S. 11-31. - (Politikwissenschaftliche paperbacks ; 30)

Reforming Technical and Technological Education.

Science.gov (United States)

Wilson, David N.

1993-01-01

Review of technical and technological educational reform in Brazil, Canada, Germany, Great Britain, Indonesia, Malaysia, Singapore, and Sweden shows that reform takes time to complete effectively, long-term approaches are needed, and reform is linked to industrial development, regional cooperation, and decentralized decision making. (SK)

Tariffs and subsidies in Zimbabwe's reforming electricity industry: steering a utility through turbulent times

International Nuclear Information System (INIS)

Mangwengwende, S.E.

2002-01-01

In 1991, the Government of Zimbabwe adopted a public enterprise reform strategy as part of a World Bank driven Economic Structural Adjustment Programme (ESAP). For the electricity sector, the Government adopted a two-pronged programme of reform - a performance improvement programme (PIP) for the national utility, the Zimbabwe Electricity Supply Authority (ZESA), and a legal and regulatory reform programme for the electricity sector in general. Ten years later, significant success has been achieved in improving the utility's performance in technical operations and customer service. However, there has been very little progress on the legal and regulatory front. This has adversely affected the utility's financial performance, as well as frustrating the Government's efforts in attracting private sector investment. The centrality of the tariff question reflects the importance of the customer or end-user to the power sector reform process. This article outlines the power sector reform experiences in Zimbabwe with special focus on the tariff question. The paper suggests, from the perspective of a utility executive, reasons for the mixed results at ZESA, and lessons for other countries in the region undertaking similar reforms. (Author)

Dairy operation management practices and herd milk production.

Science.gov (United States)

Losinger, W C; Heinrichs, A J

1996-03-01

A national US survey collected data on herd milk production and management of Holstein herds. Step-wise selection identified management practices that were related to herd milk production using only operations that calculated herd milk production as well as using data from all operations. Results were similar. Milk production was highest in the West. Operations with 25% registered cattle had higher production than operations with no registered cattle. Dairy operations that reported a mean BW > 545 kg at first calving had higher mean milk production than operations with a mean BW or = 27 mo at first calving. In addition, use of the following management practices was associated with higher rolling herd average milk production: calves born in individual areas in buildings, calves hand-fed first colostrum, starter grain fed to preweaned calves, ionophores fed to heifers from birth to first calving, DHIA record-keeping system used, computerized records, and no new cattle introduced in the previous 12 mo.

Active Power Optimal Control of Wind Turbines with Doubly Fed Inductive Generators Based on Model Predictive Control

Directory of Open Access Journals (Sweden)

Guo Jiuwang

2015-01-01

Full Text Available Because of the randomness and fluctuation of wind energy, as well as the impact of strongly nonlinear characteristic of variable speed constant frequency (VSCF wind power generation system with doubly fed induction generators (DFIG, traditional active power control strategies are difficult to achieve high precision control and the output power of wind turbines is more fluctuated. In order to improve the quality of output electric energy of doubly fed wind turbines, on the basis of analyzing the operating principles and dynamic characteristics of doubly fed wind turbines, this paper proposes a new active power optimal control method of doubly fed wind turbines based on predictive control theory. This method uses state space model of wind turbines, based on the prediction of the future state of wind turbines, moves horizon optimization, and meanwhile, gets the control signals of pitch angle and generator torque. Simulation results show that the proposed control strategies can guarantee the utilization efficiency for wind energy. Simultaneously, they can improve operation stability of wind turbines and the quality of electric energy.

High temperature ceramic-tubed reformer

Science.gov (United States)

Williams, Joseph J.; Rosenberg, Robert A.; McDonough, Lane J.

1990-03-01

The overall objective of the HiPHES project is to develop an advanced high-pressure heat exchanger for a convective steam/methane reformer. The HiPHES steam/methane reformer is a convective, shell and tube type, catalytic reactor. The use of ceramic tubes will allow reaction temperature higher than the current state-of-the-art outlet temperatures of about 1600 F using metal tubes. Higher reaction temperatures increase feedstock conversion to synthesis gas and reduce energy requirements compared to currently available radiant-box type reformers using metal tubes. Reforming of natural gas is the principal method used to produce synthesis gas (primarily hydrogen and carbon monoxide, H2 and CO) which is used to produce hydrogen (for refinery upgrading), methanol, as well as several other important materials. The HiPHES reformer development is an extension of Stone and Webster's efforts to develop a metal-tubed convective reformer integrated with a gas turbine cycle.

Lithuanian way of reforms to electricity market

International Nuclear Information System (INIS)

Bacauskas, A.

2002-01-01

Lithuania has inherited a structure of the energy industry, which originally has been developed not for the country, as an independent state, but according to the provisions of the former USSR energy policy, covering energy demand of whole region, including the Baltic countries, Belarus and the Kaliningrad region of Russia. The Lithuanian power system is interconnected by high voltage power lines and operates in parallel with Latvian, Estonian, Russian and Belarus power systems. During twelve years of independence the power sector passed significant changes from a vertically integrated monopoly to some separate power companies and meets EU requirements to an internal electricity market. The main issues of reforms: transparency of costs, commercial relations in power sector, fulfilment of the Electricity Directive 96/92/EU. The Lithuanian electricity market is small and inefficient. Current reforms of a power sector are directed to create the common Baltic electricity market. (author)

Operational and Environmental Efficiencies of Japanese Electric Power Companies from 2003 to 2015: Influence of Market Reform and Fukushima Nuclear Power Accident

Directory of Open Access Journals (Sweden)

Mika Goto

2017-01-01

Full Text Available This study measures operational and environmental efficiencies of nine incumbent electric power companies (EPCos in Japan and examines an influence of market reform and Fukushima nuclear power plant accident on efficiencies using a data set from 2003 to 2015. This study applies output-oriented radial data envelopment analysis (DEA model to the measurement of efficiencies. Three inputs and three desirable outputs are used for the measurement of operational efficiency, and one undesirable output besides inputs and desirable outputs is used to measure environmental efficiency. EPCos produce not only desirable output, for example, electricity, but also undesirable output, for example, CO2, for their operations. For the measurement of environmental efficiency, this study uses a unique DEA model that assumes occurrence of ecotechnology innovation. The results reveal that environmental efficiency of EPCos is mostly invariant over the period of this study, while operational efficiency decreases in the same period. In addition, the results present that Japanese EPCos make efforts to reduce CO2 emissions by promoting ecotechnology innovation. The Kruskal–Wallis rank sum test indicates differences in operational and environmental efficiencies among EPCos. Such performance differences might become larger as market liberalization advances, which could lead to further structural changes of the industry.

Hydrogen production by reforming of hydrocarbons and alcohols in a dielectric barrier discharge

Energy Technology Data Exchange (ETDEWEB)

Sarmiento, Belen; Brey, J. Javier; Viera, Inmaculada G. [Hynergreen Technologies, S.A. Avda. de la Buhaira, 2. 41018 Sevilla (Spain); Gonzalez-Elipe, Agustin R.; Cotrino, Jose; Rico, Victor J. [Instituto de Ciencia de los Materiales de Sevilla (CSIC-University Sevilla), Avda. Americo Vespucio, 49, 41092 Sevilla (Spain)

2007-06-10

This work reports about the use of plasmas to obtain hydrogen by reforming of hydrocarbons or alcohols in mixtures with CO{sub 2} or H{sub 2}O. The plasma is activated in a dielectric barrier discharge (DBD) reactor working at atmospheric pressure and low temperatures (i.e., about 100 C). The reactor presents a great versatility in operation and a low manufacturing cost. Results are presented for the reforming of methane, methanol and ethanol. Methane transforms up to a 70% into CO and H{sub 2} without formation of any kind of superior hydrocarbon. For the two alcohols 100% conversion into the same products is found for flows much higher than in the case of methane. The work reports a description of the reactor and the operational conditions of the power supply enabling the ignition of the plasma and its steady state operation. (author)

Budget reform in Ukraine and the OECD countries

Directory of Open Access Journals (Sweden)

Puchko Anna

2016-09-01

Full Text Available The article analyzes the fiscal reforms in Ukraine and the OECD countries. It has been proved that the main areas which should undergo changes are the tax reform, regulatory reform and restructuring policies to encourage entrepreneurship, reform of social protection and social security, reform of social sphere constituents, administrative reform, reform of the army and law enforcement, administrative and territorial reform. According to the analysis results, there has been drawn the conclusion about the need to introduce in Ukraine the successful experience of the OECD countries in implementing budget reforms.

Modeling and dynamics of an autothermal JP5 fuel reformer for marine fuel cell applications

International Nuclear Information System (INIS)

Tsourapas, Vasilis; Sun, Jing; Nickens, Anthony

2008-01-01

In this work, a dynamic model of an integrated autothermal reformer (ATR) and proton exchange membrane fuel cell (PEM FC) system and model-based evaluation of its dynamic characteristics are presented. The ATR reforms JP5 fuel into a hydrogen rich flow. The hydrogen is extracted from the reformate flow by a separator membrane (SEP), then supplied to the PEM FC for power generation. A catalytic burner (CB) and a turbine are also incorporated to recuperate energy from the remaining SEP flow that would otherwise be wasted. A dynamic model of this system, based on the ideal gas law and energy balance principles, is developed and used to explore the effects of the operating setpoint selection of the SEP on the overall system efficiency. The analysis reveals that a trade-off exists between the SEP efficiency and the overall system efficiency. Finally the open loop system simulation results are presented and conclusions are drawn on the SEP operation

CoQ10 plasmatic levels in breast-fed infants compared to formula-fed infants.

Science.gov (United States)

Compagnoni, G; Giuffrè, B; Lista, G; Mosca, F; Marini, A

2004-01-01

Coenzyme Q10 has been recognized as an important antioxidant factor besides its main role in bioenergetic metabolism. CoQ10 tissue levels depend both on exogenous dietetic intake and on endogenous biosynthesis, as this compound can be partly synthesized in human cells. Q10 plasma levels reflect the tissue content of the coenzyme and can be used to evaluate the presence of this compound in the human organism. Aim of the study was to measure CoQ10 plasmatic levels in a newborn breast-fed population and to compare them to CoQ10 levels in a newborn formula-fed population in order to verify whether changes in CoQ10 plasmatic contents could be related to a different dietetic intakes. We measured CoQ10 plasmatic levels in 25 healthy term neonates with different dietetic intakes: 15 breast-fed and 10 bottle-fed with a common infant formula. These infants were evaluated prospectively during the first month of life. The analyses were performed on the mothers' blood samples and cord blood samples at the time of delivery, then on infants at 4 and 28 days of age. Our results showed markedly reduced Q10 levels in cord blood samples compared to maternal Q10 plasmatic levels at the time of delivery, suggesting placental impermeability towards this molecule or increased fetal utilization during labor and delivery. At 4 days of age Q10 levels had increased in both groups of neonates, but significantly more in breast-fed infants compared to formula-fed babies (p <0.05). At 4 weeks of age no significant changes occurred in breast-fed infants, while values increased significantly in formula-fed infants (p <0.05). The content of Q10 in breast milk samples was lower than in infant formula. The results of this study show that CoQ10 plasmatic levels are at least partly influenced by the exogenous dietetic supply.

Equipment experience in a radioactive LFCM [liquid-fed ceramic melter] vitrification facility

International Nuclear Information System (INIS)

Holton, L.K. Jr.; Dierks, R.D.; Sevigny, G.J.; Goles, R.W.; Surma, J.E.; Thomas, N.M.

1986-11-01

Since October 1984, the Pacific Northwest Laboratory (PNL) has operated a pilot-scale radioactive liquid-fed ceramic melter (RLFCM) vitrification process in shielded manipulator hot cells. This vitrification facility is being operated for the Department of Energy (DOE) to remotely test vitrification equipment components in a radioactive environment and to develop design and operation data that can be applied to production-scale projects. This paper summarizes equipment and process experience obtained from the operations of equipment systems for waste feeding, waste vitrification, canister filling, canister handling, and vitrification off-gas treatment

Internal steam reforming in solid oxide fuel cells: Status and opportunities of kinetic studies and their impact on modelling

DEFF Research Database (Denmark)

Mogensen, David; Grunwaldt, J.-D.; Hendriksen, Peter Vang

2011-01-01

Solid oxide fuel cells (SOFC) systems with internal steam reforming have the potential to become an economically competitive technology for cogeneration power plants, exploiting its significantly higher electrical efficiency compared to existing technologies. Optimal design and operation of such ......Solid oxide fuel cells (SOFC) systems with internal steam reforming have the potential to become an economically competitive technology for cogeneration power plants, exploiting its significantly higher electrical efficiency compared to existing technologies. Optimal design and operation...

Model-based intensification of a fed-batch microbial process for the maximization of polyhydroxybutyrate (PHB) production rate.

Science.gov (United States)

Penloglou, Giannis; Vasileiadou, Athina; Chatzidoukas, Christos; Kiparissides, Costas

2017-08-01

An integrated metabolic-polymerization-macroscopic model, describing the microbial production of polyhydroxybutyrate (PHB) in Azohydromonas lata bacteria, was developed and validated using a comprehensive series of experimental measurements. The model accounted for biomass growth, biopolymer accumulation, carbon and nitrogen sources utilization, oxygen mass transfer and uptake rates and average molecular weights of the accumulated PHB, produced under batch and fed-batch cultivation conditions. Model predictions were in excellent agreement with experimental measurements. The validated model was subsequently utilized to calculate optimal operating conditions and feeding policies for maximizing PHB productivity for desired PHB molecular properties. More specifically, two optimal fed-batch strategies were calculated and experimentally tested: (1) a nitrogen-limited fed-batch policy and (2) a nitrogen sufficient one. The calculated optimal operating policies resulted in a maximum PHB content (94% g/g) in the cultivated bacteria and a biopolymer productivity of 4.2 g/(l h), respectively. Moreover, it was demonstrated that different PHB grades with weight average molecular weights of up to 1513 kg/mol could be produced via the optimal selection of bioprocess operating conditions.

Demonstration of an approach to waste form qualification through simulation of liquid-fed ceramic melter process operations

International Nuclear Information System (INIS)

Reimus, P.W.; Kuhn, W.L.; Peters, R.D.; Pulsipher, B.A.

1986-07-01

During fiscal year 1982, the US Department of Energy (DOE) assigned responsibility for managing civilian nuclear waste treatment programs in the United States to the Nuclear Waste Treatment Program (NWTP) at the Pacific Northwest Laboratory (PNL). One of the principal objectives of this program is to establish relationships between vitrification process control and glass quality. Users of the liquid-fed ceramic melter (LFCM) process will need such relationships in order to establish acceptance of vitrified high-level nuclear waste at a licensed federal repository without resorting to destructive examination of the canisters. The objective is to be able to supply a regulatory agency with an estimate of the composition, durability, and integrity of the glass in each waste glass canister produced from an LFCM process simply by examining the process data collected during the operation of the LFCM. The work described here will continue through FY-1987 and culminate in a final report on the ability to control and monitor an LFCM process through sampling and process control charting of the LFCM feed system

Administrative Reform

DEFF Research Database (Denmark)

Plum, Maja

Through the example of a Danish reform of educational plans in early childhood education, the paper critically addresses administrative educational reforms promoting accountability, visibility and documentation. Drawing on Foucaultian perspectives, the relation between knowledge and governing...... of administrative technology, tracing how the humanistic values of education embed and are embedded within ‘the professional nursery teacher' as an object and subject of administrative practice. Rather than undermining the humanistic potential of education, it is argued that the technology of accounting...

Health care reforms.

Science.gov (United States)

Marušič, Dorjan; Prevolnik Rupel, Valentina

2016-09-01

In large systems, such as health care, reforms are underway constantly. The article presents a definition of health care reform and factors that influence its success. The factors being discussed range from knowledgeable personnel, the role of involvement of international experts and all stakeholders in the country, the importance of electoral mandate and governmental support, leadership and clear and transparent communication. The goals set need to be clear, and it is helpful to have good data and analytical support in the process. Despite all debates and experiences, it is impossible to clearly define the best approach to tackle health care reform due to a different configuration of governance structure, political will and state of the economy in a country.

Diesel autothermal reforming with hydrogen peroxide for low-oxygen environments

International Nuclear Information System (INIS)

Han, Gwangwoo; Lee, Sangho; Bae, Joongmyeon

2015-01-01

Highlights: • The concept of diesel reforming using hydrogen peroxide was newly proposed. • Characteristics of hydrogen peroxide was experimentally investigated. • Thermodynamically possible operating conditions were analyzed. • Catalytic performance of Ni–Ru/CGO for various diesel compounds was evaluated. • Long-term testing was successfully conducted using Korean commercial diesel. - Abstract: To operate fuel cells effectively in low-oxygen environments, such as in submarines and unmanned underwater vehicles, a hydrogen source with high hydrogen storage density is required. In this paper, diesel autothermal reforming (ATR) with hydrogen peroxide as an alternative oxidant is proposed as a hydrogen production method. Diesel fuel has higher hydrogen density than metal hydrides or other hydrocarbons. In addition, hydrogen peroxide can decompose into steam and oxygen, which are required for diesel ATR. Moreover, both diesel fuel and hydrogen peroxide are liquid states, enabling easy storage for submarine applications. Hydrogen peroxide exhibited the same characteristics as steam and oxygen when used as an oxidant in diesel reforming when pre-decomposition method was used. The thermodynamically calculated operating conditions were a steam-to-carbon ratio (SCR) of 3.0, an oxygen-to-carbon ratio (OCR) of 0.5, and temperatures below 700 °C to account for safety issues associated with hydrogen peroxide use and exothermic reactions. Catalytic activity and stability tests over Ni–Ru (19.5–0.5 wt.%)/Ce 0.9 Gd 0.1 O 2−x were conducted using various diesel compounds. Furthermore, long-term diesel ATR tests were conducted for 200 h using Korean commercial diesel. The degradation rate was 3.67%/100 h without the production of ethylene

Reform of reserve requirements for nuclear decommissioning, dismantling and disposal; Reform der Atomrueckstellungen fuer Stilllegung/Rueckbau und Entsorgung

Energy Technology Data Exchange (ETDEWEB)

Meyer, Bettina [Forum Oekologisch-Soziale Marktwirtschaft e.V. (FOeS), Berlin (Germany); Kuechler, Swantje; Wronski, Rupert [Forum Oekologisch-Soziale Marktwirtschaft e.V. (FOeS), Berlin (Germany). Bereich Energiepolitik

2015-07-15

This article reports on the ongoing intense discussion as to whether the financial reserves of nuclear power plant operators are sufficient. It starts out with an overview of the current scientific and political debate. This is followed by a brief analysis of nuclear financial reserves in 2014 and preceding years. The authors then present the reform concept of the Forum Oekologisch-Soziale Marktwirtschaft (FOes) and go on to compare it with concepts from the political realm.

Electricity market reforms : institutional developments, investment dynamics and game modeling (Finland)

International Nuclear Information System (INIS)

Pineau, P.-O.

2001-01-01

During the 1990s, there was a definite trend to reform the electric power industry from the way in which it operated a century ago. The reform does not try to totally remove regulation. Rather, the basic objective is to limit central and governmental control over the industry so that free competition can be encouraged at all possible levels. This thesis tried to understand the status of deregulatory reforms and reviews how different countries and large utilities have reacted to the trend. Electricity is particular in that it is a non-storable basic good that is centrally produced. Compared to other industries such as the airline or telecommunication industry, this special nature creates barriers in the restructuring of power markets. An issue that is emerging with deregulation is that national energy policy goals no longer determine the behaviour of utilities. This will impact on how investments will be coordinated in the new market. A major factor to keep in mind is the competition level sought by these reforms. It is not yet known to which extent full competition can really occur in electricity markets. The oligopolistic structure of the market may even prevent such an outcome. It is important to examine the investment dynamics in such a context. This was the primary theme of the thesis. The two complementary approaches used included an example of an institution and its economic arguments that support market reform. A detailed example of the reform process in the electricity market in Finland was presented. The second approach was more analytical and was based on the market equilibria that may occur as a result of market reform. A dynamic model of investment for the power market was again applied to the electricity market in Finland

Electricity market reforms : institutional developments, investment dynamics and game modeling (Finland)

Energy Technology Data Exchange (ETDEWEB)

Pineau, P.-O.

2001-07-01

During the 1990s, there was a definite trend to reform the electric power industry from the way in which it operated a century ago. The reform does not try to totally remove regulation. Rather, the basic objective is to limit central and governmental control over the industry so that free competition can be encouraged at all possible levels. This thesis tried to understand the status of deregulatory reforms and reviews how different countries and large utilities have reacted to the trend. Electricity is particular in that it is a non-storable basic good that is centrally produced. Compared to other industries such as the airline or telecommunication industry, this special nature creates barriers in the restructuring of power markets. An issue that is emerging with deregulation is that national energy policy goals no longer determine the behaviour of utilities. This will impact on how investments will be coordinated in the new market. A major factor to keep in mind is the competition level sought by these reforms. It is not yet known to which extent full competition can really occur in electricity markets. The oligopolistic structure of the market may even prevent such an outcome. It is important to examine the investment dynamics in such a context. This was the primary theme of the thesis. The two complementary approaches used included an example of an institution and its economic arguments that support market reform. A detailed example of the reform process in the electricity market in Finland was presented. The second approach was more analytical and was based on the market equilibria that may occur as a result of market reform. A dynamic model of investment for the power market was again applied to the electricity market in Finland.

Exocrine pancreatic secretion is stimulated in piglets fed Fish oil compared with those fed Coconut Oil or Lard

DEFF Research Database (Denmark)

Hedemann, Mette Skou; Pedersen, Asger Roer; Engberg, Ricarda M.

2001-01-01

An experiment was conducted to study the effect of feeding diets containing fat sources with different fatty acid composition (fish oil, coconut oil or lard, 10 g/100 g diet) on exocrine pancreatic secretion in piglets after weaning. A total of 16 barrows were weaned at 4 wk of age; 3 d later...... the coconut oil or lard diets. The output [U/(h. kg(0.75))] of lipase was higher in piglets fed fish oil than in piglets fed lard or coconut oil. The output of colipase was greater in piglets fed fish oil and coconut oil than in those fed lard. The dietary treatments did not affect the output of carboxylester...... hydrolase. The output of trypsin was significantly lower in piglets fed lard than in piglets fed fish oil or coconut oil diets and the output of carboxypeptidase B was greater in those fed the fish oil diet. Protein, chymotrypsin, carboxypeptidase A, elastase and amylase outputs did not differ among...

Strengthening and Renewing UN Peace Operations

DEFF Research Database (Denmark)

Jacobsen, Katja Lindskov; Engell, Troels Gauslå

This report is a part of Centre for Military Studies’ policy research services for the Ministry of Defence. The purpose of the report is to shed light on the possibilities and challenges related to the current efforts at reforming UN peace operations and to arrive at a set of recommendations...... for how Denmark can contribute to the reform process, thereby enhancing the relevance of UN peace operations for Danish security policy. The Centre for Military Studies is a research centre at the Department of Political Science at the University of Copenhagen. The Centre undertakes research on security...

PEM - fuel cell system for residential applications

Energy Technology Data Exchange (ETDEWEB)

Britz, P. [Viessmann Werke GmbH and Co KG, 35107 Allendorf (Germany); Zartenar, N.

2004-12-01

Viessmann is developing a PEM fuel cell system for residential applications. The uncharged PEM fuel cell system has a 2 kW electrical and 3 kW thermal power output. The Viessmann Fuel Processor is characterized by a steam-reformer/burner combination in which the burner supplies the required heat to the steam reformer unit and the burner exhaust gas is used to heat water. Natural gas is used as fuel, which is fed into the reforming reactor after passing an integrated desulphurisation unit. The low temperature (600 C) fuel processor is designed on the basis of steam reforming technology. For carbon monoxide removal, a single shift reactor and selective methanisation is used with noble metal catalysts on monoliths. In the shift reactor, carbon monoxide is converted into hydrogen by the water gas shift reaction. The low level of carbon monoxide at the outlet of the shift reactor is further reduced, to approximately 20 ppm, downstream in the methanisation reactor, to meet PEM fuel cell requirements. Since both catalysts work at the same temperature (240 C), there is no requirement for an additional heat exchanger in the fuel processor. Start up time is less than 30 min. In addition, Viessmann has developed a 2 kW class PEFC stack, without humidification. Reformate and dry air are fed straight to the stack. Due to the dry operation, water produced by the cell reaction rapidly diffuses through the electrolyte membrane. This was achieved by optimising the MEA, the gas flow pattern and the operating conditions. The cathode is operated by an air blower. (Abstract Copyright [2004], Wiley Periodicals, Inc.)

Farmer Support and Extension to Land Reform Farms in the Central ...

African Journals Online (AJOL)

In addition, farm management knowledge, skills and experience are at low levels. Baseline evidence suggests that agricultural extension services and institutions involved in land reform policies need to upscale on farm economics and viability assessments of farm operations. Management information systems need to be ...

Implementing health care reform: implications for performance of public hospitals in central Ethiopia.

Science.gov (United States)

Manyazewal, Tsegahun; Matlakala, Mokgadi C

2018-06-01

Understanding the way health care reforms have succeeded or failed thus far would help policy makers cater continued reform efforts in the future and provides insight into possible levels of improvement in the health care system. This work aims to assess and describe the implications of health care reform on the performance of public hospitals in central Ethiopia. A facility-based, cross-sectional study was carried out in five public hospitals with different operational characteristics that have been implementing health care reform in central Ethiopia. The reform documents were reviewed to assess the nature and targets of the reform for interpretive analysis. Adopting dimensions of health system performance as the theoretical framework, a self-administered questionnaire was developed. Consenting health care professionals who have been involved in the reform from inception to implementation filled the questionnaire. Cronbach's alpha was measured to ensure internal consistency of the instrument. Descriptive statistics, weighted median score, χ 2 , and Mann-Whitney U and Kruskal-Wallis tests were used for data analysis. s Despite implementation of the reform, the health care system in public hospitals was still fragmented as confirmed by 50% of respondents. Limited effects were reported in favour of quality (48%), access (50%), efficiency (51%), sustainability (53%), and equity (61%) of care, while poor effects were reported in patient-provider (41%) and provider-management (32%) interactions. Though there was substantial gain in infrastructure and workspace, stewardship of health care resources was less benefited. The predominant hindrances of the reform were the working environment (adjusted Odds Ratio (aOR) = 2.27, 95% confidence interval (CI): 1.15-4.47), financial resources (aOR = 3.54, 95%CI = 1.97-6.33), management (aOR = 2.27, 95% CI = 1.15-4.47), and information technology system (aOR = 3.15, 95% CI = 1.57-6.32). s The Ethiopian

Impact of reform and privatization on consumers: A case study of power sector reform in Orissa, India

International Nuclear Information System (INIS)

Kundu, Goutam Kumar; Mishra, Bidhu Bhusan

2011-01-01

Orissa is the first state in India to have undergone reform in the power sector, with the government withdrawing its control. The model of this reform is known as the WB-Orissa model. The goal of this paper is to examine the impact of this reform on consumers of electricity, which has been measured using multiple regression models. The variables represent the parameters that consumers are most interested in, and the regression coefficients represent the weights of the corresponding variables. The data were collected using a survey methodology. The impact of reform was found to be mixed. Some groups of consumers saw benefits, while others felt a negative impact. A focus group study was conducted to identify the variables of interest to consumers of electricity. The model was used to estimate consumer benefit and was validated using primary data and structural equation modeling. The study revealed beneficial aspects of reform and areas with no benefits. - Highlights: → Linear regression model with seven variables explains consumer benefit. → Governance issue exists after power sector reform of Orissa. → Reform benefited most consumers with a few exceptions. → Reform affected agricultural consumers.

Teaching Reform of Civil Engineering Materials Course Based on Project-Driven Pedagogy

Science.gov (United States)

Yidong, Xu; Wei, Chen; WeiguoJian, You; Jiansheng, Shen

2018-05-01

In view of the scattered experimental projects in practical courses of civil engineering materials, the poor practical ability of students and the disconnection between practical teaching and theoretical teaching, this paper proposes a practical teaching procedure. Firstly, the single experiment should be offered which emphasizes on improving the students’ basic experimental operating ability. Secondly, the compressive experiment is offered and the overall quality of students can be examined in the form of project team. In order to investigate the effect of teaching reform, the comparative analysis of the students of three grades (2014, 2015 and 2016) majored in civil engineering was conducted. The result shows that the students’ ability of experimental operation is obviously improved by using the project driven method-based teaching reform. Besides, the students’ ability to analyse and solve problems has also been improved.

Control Demonstration of Multiple Doubly-Fed Induction Motors for Hybrid Electric Propulsion

Science.gov (United States)

Sadey, David J.; Bodson, Marc; Csank, Jeffrey T.; Hunker, Keith R.; Theman, Casey J.; Taylor, Linda M.

2017-01-01

The Convergent Aeronautics Solutions (CAS) High Voltage-Hybrid Electric Propulsion (HVHEP) task was formulated to support the move into future hybrid-electric aircraft. The goal of this project is to develop a new AC power architecture to support the needs of higher efficiency and lower emissions. This proposed architecture will adopt the use of the doubly-fed induction machine (DFIM) for propulsor drive motor application.The Convergent Aeronautics Solutions (CAS) High Voltage-Hybrid Electric Propulsion (HVHEP) task was formulated to support the move into future hybrid-electric aircraft. The goal of this project is to develop a new AC power architecture to support the needs of higher efficiency and lower emissions. This proposed architecture will adopt the use of the doubly-fed induction machine (DFIM) for propulsor drive motor application. DFIMs are attractive for several reasons, including but not limited to the ability to self-start, ability to operate sub- and super-synchronously, and requiring only fractionally rated power converters on a per-unit basis depending on the required range of operation. The focus of this paper is based specifically on the presentation and analysis of a novel strategy which allows for independent operation of each of the aforementioned doubly-fed induction motors. This strategy includes synchronization, soft-start, and closed loop speed control of each motor as a means of controlling output thrust; be it concurrently or differentially. The demonstration of this strategy has recently been proven out on a low power test bed using fractional horsepower machines. Simulation and hardware test results are presented in the paper.

Evaluation of Partial Oxidation Reformer Emissions

Energy Technology Data Exchange (ETDEWEB)

Unnasch, Stefan; Fable, Scott; Waterland, Larry

2006-01-06

In this study, a gasoline fuel processor and an ethanol fuel processor were operated under conditions simulating both startup and normal operation. Emissions were measured before and after the AGB in order to quantify the effectiveness of the burner catalyst in controlling emissions. The emissions sampling system includes CEM for O2, CO2, CO, NOx, and THC. Also, integrated gas samples are collected in evacuated canisters for hydrocarbon speciation analysis via GC. This analysis yields the concentrations of the hydrocarbon species required for the California NMOG calculation. The PM concentration in the anode burner exhaust was measured through the placement of a filter in the exhaust stream. The emissions from vehicles with fully developed on board reformer systems were estimated.

Optimization of fed-batch fermentation for xylitol production by Candida tropicalis.

Science.gov (United States)

Kim, J-H; Han, K-C; Koh, Y-H; Ryu, Y-W; Seo, J-H

2002-07-01

Xylitol, a functional sweetener, was produced from xylose by biological conversion using Candida tropicalis ATCC 13803. Based on a two-substrate fermentation using glucose for cell growth and xylose for xylitol production, fed-batch fermentations were undertaken to increase the final xylitol concentration. The effects of xylose and xylitol on xylitol production rate were studied to determine the optimum concentrations for fed-batch fermentation. Xylose concentration in the medium (100 g l(-1)) and less than 200 g l(-1) total xylose plus xylitol concentration were determined as optimum for maximum xylitol production rate and xylitol yield. Increasing the concentrations of xylose and xylitol decreased the rate and yield of xylitol production and the specific cell growth rate, probably because of an increase in osmotic stress that would interfere with xylose transport, xylitol flux to secretion to cell metabolism. The feeding rate of xylose solution during the fed-batch mode of operation was determined by using the mass balance equations and kinetic parameters involved in the equations in order to increase final xylitol concentration without affecting xylitol and productivity. The optimized fed-batch fermentation resulted in 187 g l(-1) xylitol concentration, 0.75 g xylitol g xylose(-1) xylitol yield and 3.9 g xylitol l(-1) h(-1) volumetric productivity.

Health care reforms

Directory of Open Access Journals (Sweden)

Marušič Dorjan

2016-09-01

Full Text Available In large systems, such as health care, reforms are underway constantly. The article presents a definition of health care reform and factors that influence its success. The factors being discussed range from knowledgeable personnel, the role of involvement of international experts and all stakeholders in the country, the importance of electoral mandate and governmental support, leadership and clear and transparent communication. The goals set need to be clear, and it is helpful to have good data and analytical support in the process. Despite all debates and experiences, it is impossible to clearly define the best approach to tackle health care reform due to a different configuration of governance structure, political will and state of the economy in a country.

Direct internal steam reforming of ethanol in a solid oxide fuel cell (SOFC) - A thermodynamic analysis

International Nuclear Information System (INIS)

Lima da Silva, Aline; De Fraga Malfatti, Celia; Heck, Nestor Cesar; Melo Halmenschlager, Cibele

2003-01-01

Among the various types of fuel cells, the solid oxide fuel cell (SOFC) has attracted considerable interest due to the possibility for operation with an internal reformer and higher system efficiency. In SOFC, high operative temperature allows the direct conversion of ethanol into H 2 and CO to take place in the electrochemical cell. Ethanol is considered to be an attractive fuel because it is a renewable energy source and presents some advantages over other green fuels such as safety in storage and handling. Direct internal reforming of ethanol, however, can produce undesirable products that diminish system efficiency and, in the case of carbon deposition over the anode, promote the growth of carbon filaments attached to the anode crystallites which generate massive forces within the electrode structure leading to its rapid breakdown. In this context, a thermodynamic analysis is fundamental to predict the product distribution as well as the conditions favorable for carbon to precipitate inside the cell. Despite of such importance, there are few works in literature dealing with thermodynamic analysis of the direct internal steam reforming of ethanol in fuel cell systems. Hence, the aim of this work is to find appropriate ranges for operating conditions where carbon deposition in SOFC with direct internal reforming operation is not feasible, in temperature range of 500- 1200K. The calculation here is more complicated than that for a reformer because the disappearance of hydrogen and the generation of H 2 O from electrochemical reaction must be taken into account. In the present study, the effects of hydrogen consumption on anode components and on carbon formation are investigated. Equilibrium determinations are performed by the Gibbs energy minimization method, considering the following species: H 2 , H 2 O, CH 4 , CO, CO 2 and C gr . (graphite). The effect of the type of solid electrolyte (oxygen-conducting and hydrogen-conducting) on carbon formation is also

Reform and Backlash to Reform

DEFF Research Database (Denmark)

Hougaard Jensen, Svend E.; Hagen Jørgensen, Ole

Using a stochastic general equilibrium model with overlapping generations, this paper studies (i) the effects on both extensive and intensive labor supply responses to changes in fertility rates, and (ii) the potential of a retirement reform to mitigate the effects of fertility changes on labor s...

INSTITUTIONAL THEORY OF ECONOMIC REFORMS: BASIC IMPERATIVES

Directory of Open Access Journals (Sweden)

Oleg Sergeevich SUKHAREV

2015-07-01

Full Text Available The ability of institutional economic theory to explain various kinds of economic reforms (changes on the basis of theoretical ideas about the dysfunction of institutions and systems are investigated. A number of classifications of reforms and dysfunctions is introduced and kinds of institutional efficiency of economic systems are defined. Qualitative regularities of various reforms of the twentieth century in different countries are generalized. A number of criteria of effective institutional reforms, capable to lower the depth and the scale of dysfunctions of the functioning economic subsystems is formed. System approach to the analysis of economic systems reforming with underlining the importance of reform “management” factor which defines productivity of economic development is elaborated. Life cycle of institution and economic system in the process of its reforming is presented and correction of J. Hellmann’s model, describing the reforming logic of economy is made.

Cardiac Hypertrophy and Brain Natriuretic Peptide Levels in an Ovariectomized Rat Model Fed a High-Fat Diet

Science.gov (United States)

Goncalves, Gleisy Kelly; de Oliveira, Thiago Henrique Caldeira; de Oliveira Belo, Najara

2017-01-01

Background Heart failure in women increases around the time of menopause when high-fat diets may result in obesity. The heart produces brain natriuretic peptide (BNP), also known as B-type natriuretic peptide. This aims of this study were to assess cardiac hypertrophy and BNP levels in ovariectomized rats fed a high-fat diet. Material/Methods Forty-eight female Wistar rats were divided into four groups: sham-operated rats fed a control diet (SC) (n=12); ovariectomized rats fed a control diet (OC) (n=12); sham-operated rats fed a high-fat diet (SF) (n=12); and ovariectomized rats fed a high-fat diet (OF) (n=12). Body weight and blood pressure were measured weekly for 24 weeks. Rats were then euthanized, and plasma samples and heart tissue were studied for gene expression, hydroxyproline levels, and histological examination. Results A high-fat diet and ovariectomy (group OF) increased the weight body and the systolic blood pressure after three months and five months, respectively. Cardiomyocyte hypertrophy was associated with increased expression of ventricular BNP, decreased natriuretic peptide receptor (NPR)-A and increased levels of hydroxyproline and transforming growth factor (TGF)-β. The plasma levels of BNP and estradiol were inversely correlated; expression of estrogen receptor (ER)β and ERα were reduced. Conclusions The findings of this study showed that, in the ovariectomized rats fed a high-fat diet, the BNP-NPR-A receptor complex was involved in cardiac remodeling. BNP may be a marker of cardiac hypertrophy in this animal model. PMID:29249795

Political Parties, Clientelism, and Bureaucratic Reform

OpenAIRE

Cruz, Cesi; Keefer, Philip

2015-01-01

The challenge of public administration reform is well-known: politicians often have little interest in the efficient implementation of government policy. Using new data from 439 World Bank public sector reform loans in 109 countries, we demonstrate that such reforms are significantly less likely to succeed in the presence of non-programmatic political parties. Earlier research uses evidence from a small group of countries to conclude that clientelistic politicians resist reforms that restrict...

Education Reform in Hong Kong

Directory of Open Access Journals (Sweden)

Chris Dowson

2000-05-01

Full Text Available Since the early 1990s, the pace of educational reform in Hong Kong has accelerated and broadened to incorporate almost all areas of schooling. The reforms introduced during this period can be subsumed under what has generally been labelled the quality movement. In this paper, we review and comment on a number of policy reform initiatives in the four areas of "Quality Education," English Language Benchmarking, Initial Teacher Training and the Integration of Pupils with Special Needs into Ordinary Classrooms. Following a brief description of each policy initiative, the reforms are discussed in terms of their consistency, coherence and cultural fit.

Policies lost in translation? Unravelling water reform processes in African waterscapes

NARCIS (Netherlands)

Kemerink-Seyoum, J.S.

2015-01-01

Since the 1980s a major change took place in public policies for water resources management. The role of governments shifted under this reform process from an emphasis on investment in the development, operation and maintenance of water infrastructure to a focus on managing water resources systems

The Anti-Nociceptive Effect of Aloe. Vera Aqueous Extract in Fructose-Fed Male Rats

Directory of Open Access Journals (Sweden)

Mohammad Reza Shahraki

2010-05-01

Full Text Available A B S T R A C T Introduction: Aloe Vera extract is used as an anti-inflammatory and anti-bradikinin agent in laboratory animals. The aim of this survey was to evaluate the ant-nociceptive effect of A. Vera aqueous extract in fructose-fed male rats. Methods: Forty-five Wistar-Albino male rats were equally and randomly divided into five groups including sham operated and four test groups. Sham operated group consumed tap water and the test groups consumed fructoseenriched water. Test groups 2, 3 and 4 additionally received, 0, 100, 150 and 200 mg/kg of A. Vera extract, respectively, whereas the other test group received distilled water daily. Tail flick reaction time, serum glucose and oral glucose tolerance test (OGTT were measured. The results were analyzed by SPSS software using ANOVA and Tukey tests. Results were expressed as mean ± SD. Statistical differences were considered significant at p<0.05. Results: The results showed that tail flick reaction time significantly increased in test group 3 which received 200 mg/kg A. Vera extract comparing with that of sham operated group. However, OGTT and serum glucose value were significantly increased in all fructose-fed male rats comparing with those of sham operated group. Discussion: These results indicated that A. Vera aqueous extract can affect tail flick reaction time in fructose-fed male rats. Further studies are required to show the exact mechanism of anti-nociceptive effect of A. Vera extract.

Compact methanol reformer test for fuel-cell powered light-duty vehicles

Energy Technology Data Exchange (ETDEWEB)

Emonts, B; Hoehlein, B; Peters, R [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Energieverfahrenstechnik (IEV); Hansen, J B; Joergensen, S L [Haldor Topsoe A/S, Lyngby (Denmark)

1998-03-15

On-board production of hydrogen from methanol based on a steam reformer in connection with the use of low-temperature fuel-cells (PEMFC) is an attractive option as energy conversion unit for light-duty vehicles. A steam reforming process at higher pressures with an external burner offers advantages in comparison to a steam reformer with integrated partial oxidation in terms of total efficiency for electricity production. The main aim of a common project carried out by the Forschungszentrum Juelich (FZJ), Haldor Topsoee A/S (HTAS) and Siemens AG is to design, to construct and to test a steam reformer reactor concept (HTAS) with external catalytic burner (FZJ) as heat source as well as catalysts for heterogeneously catalyzed hydrogen production (HTAS), concepts for gas treatment (HTAS, FZJ) and a low-temperature fuel cell (Siemens). Based on the experimental results obtained so far concerning methanol reformers, catalytic burners and gas conditioning units, our report describes the total system, a test unit and preliminary test results related to a hydrogen production capacity of 50 kW (LHV) and dynamic operating conditions. This hydrogen production system is aimed at reducing the specific weight (<2 kg/kW{sub th} or 4 kg/kW{sub el}) combined with high efficiency for net electricity generation from methanol (about 50%) and low specific emissions. The application of Pd-membranes as gas cleaning unit fulfill the requirements with high hydrogen permeability and low cost of the noble metal. (orig.)

Temperature control system for liquid-fed ceramic melters

International Nuclear Information System (INIS)

Westsik, J.H. Jr.

1986-10-01

A temperature-feedback system has been developed for controlling electrical power to liquid-fed ceramic melters (LFCM). Software, written for a microcomputer-based data acquisition and process monitoring system, compares glass temperatures with a temperature setpoint and adjusts the electrical power accordingly. Included in the control algorithm are steps to reject failed thermocouples, spatially average the glass temperatures, smooth the averaged temperatures over time using a digital filter, and detect foaming in the glass. The temperature control system has proved effective during all phases of melter operation including startup, steady operation, loss of feed, and shutdown. This system replaces current, power, and resistance feedback control systems used previously in controlling the LFCM process

Hydrogen-rich gas production by continuous pyrolysis and in-line catalytic reforming of pine wood waste and HDPE mixtures

International Nuclear Information System (INIS)

Arregi, Aitor; Amutio, Maider; Lopez, Gartzen; Artetxe, Maite; Alvarez, Jon; Bilbao, Javier; Olazar, Martin

2017-01-01

Highlights: • Plastic co-feeding improves the flexibility of biomass pyrolysis-reforming strategy. • Hydrogen production is enhanced by increasing plastic content in the feed. • The joint valorization of biomass and plastics attenuates catalyst deactivation. • The amorphous coke derived from biomass is the main responsible for deactivation. - Abstract: The continuous pyrolysis-reforming of pine sawdust and high density polyethylene mixtures (25, 50 and 75 wt% HDPE) has been performed in a two-stage reaction system provided with a conical spouted bed reactor (CSBR) and a fluidized bed reactor. The influence HDPE co-feeding has on the conversion, yields and composition of the reforming outlet stream and catalyst deactivation has been studied at a reforming temperature of 700 °C, with a space time of 16.7 g_c_a_t min g_f_e_e_d_i_n_g"−"1 and a steam/(biomass + HDPE) mass ratio of 4, and a comparison has been made between these results and those recorded by feeding pine sawdust and HDPE separately. Co-feeding plastics enhances the hydrogen production, which increases from 10.9 g of H_2 per 100 g of feed (only pine sawdust in the feed) to 37.3 g of H_2 per 100 g of feed (only HDPE in the feed). Catalyst deactivation by coke is attenuated when HDPE is co-fed due to the lower content of oxygenated compounds in the reaction environment. The higher yield of hydrogen achieved with this two-step (pyrolysis-reforming) strategy, its ability to jointly valorise biomass and plastic mixtures and the lower temperatures required compared to gasification make this promising process for producing H_2 from renewable raw materials and wastes.

Board Governance: Transformational Approaches Under Healthcare Reform.

Science.gov (United States)

Zastocki, Deborah K

2015-01-01

Previous successes of healthcare organizations and effective governance practices in the pre-reform environment are not predictive of future success. Healthcare has been through numerous phases of growth and development using tried-and-true strategies. The challenge is that our toolbox does not contain what is needed to build the future healthcare delivery systems required in the post-reform world. Healthcare has had a parochial focus at the local level, with some broadening of horizons at the state and national levels. But healthcare delivery is now a global issue that requires a totally different perspective, and many countries are confronting similar issues. US healthcare reform initiatives have far-reaching implications. Compounding the reform dynamics are the simultaneously occurring, gamechanging accelerants such as enabling information technologies and mobile health, new providers of healthcare, increased consumer demands, and limited healthcare dollars, to name a few. Operating in this turbulent environment requires transformational board, executive, and physician leadership because traditional ways of planning for incremental change and attempting to time those adjustments can prove disastrous. Creating the legacy healthcare system for tomorrow requires governing boards and executive leadership to act today as they would in the desired future system. Boards need to create a culture that fosters.innovation with a tolerance for risk and some failure. To provide effective governance, boards must essentially develop new skills, expertise, and ways of thinking. The rapid rate of change requires board members to possess certain capabilities, including the ability to deal with ambiguity and uncertainty while demonstrating flexibility and adaptability, all with a driving commitment to metrics and results. This requires development plans for both individual members and the overall board. In short, the board needs to function differently, particularly regarding the

Voltage Control in Wind Power Plants with Doubly Fed Generators

DEFF Research Database (Denmark)

Garcia, Jorge Martinez

In this work, the process of designing a wind power plant composed of; doubly fed induction generators, a static compensator unit, mechanically switched capacitors and on-load tap changer, for voltage control is shown. The selected control structure is based on a decentralized system, since...... supplied by the doubly fed induction generator wind turbines is overcome by installing a reactive power compensator, i.e. a static compensator unit, which is coordinated with the plant control by a specific dispatcher. This dispatcher is set according to the result of the wind power plant load flow....... To release the operation of the converters during steady-state disturbances, mechanically switched capacitors are installed in the wind power plant, which due to their characteristics, they are appropriate for permanent disturbances compensation. The mechanically switched capacitors are controlled to allow...

Security Sector Reform in Albania

OpenAIRE

Abazi, Enika; Bumci, Aldo; Hide, Enri; Rakipi, Albert

2009-01-01

International audience; This paper analyses security sector reform (SSR) in Albania. In all its enterprises in reforming the security sector,Albania is assisted by different initiatives and projects that provide expertise and financial support. To assesswhether reforms improved the overall security environment (national and human) of the country, it is necessaryto measure the effectiveness of the various initiatives and projects. This is gauged by how well the initiatives andprojects achieved...

Does the Energy Sector Reform Call for Reform

International Nuclear Information System (INIS)

Granic, G.

2007-01-01

This paper discusses the course of the energy sector reforms in Europe so far, its objectives, achievements, issues, and dilemmas. In particular, long term and security aspects of energy supply of Europe are analyzed. In addition to the legislative changes regarding the open energy market regulation, and primarily the changes, concerning electricity and natural gas markets, the past period saw dynamic changes of institutional framework such as: increasing members of the European Union, increased number of countries aspiring to the EU (candidate countries and potential candidates), changes in other European countries out of which Russia is the most significant energy producer. The paper analyzes the issue of responsibility between state - regulator - system operator - trader - energy buyer. In Europe, it is more a complex question because the system of responsibility includes the institution of the European Union. Therefore, the relations between EU - state - regulator - system operator - trader - energy buyer are especially important. The paper looks in to the issue of energy company integrations, creation of energy mega-undertakings and their influence on further market development. The question of monopolies now appears in s new form. The conclusions suggest possible measures for institutional influence on energy market development, especially in the network energy systems, which may have a positive impact on system security and stability and markets development and their long term sustainability.(author)

Production of gaseous and liquid chemicals by aqueous phase reforming of crude glycerol: Influence of operating conditions on the process

International Nuclear Information System (INIS)

Remón, J.; Giménez, J.R.; Valiente, A.; García, L.; Arauzo, J.

2016-01-01

Highlights: • Aqueous phase reforming: a tailor-made process for the valorisation of crude glycerol. • In-depth understanding of the effect of the operating conditions on the process. • Process optimisation for the selective production of valuable gas and liquid products. • Low pressure and high temperature and spatial time favour gas production. • High pressure and medium temperature maximise the production of valuable liquids. - Abstract: The present work studies the influence of the temperature (200–240 °C), pressure (38–50 bar), glycerol concentration (10–50 wt.%) and mass of catalyst/ glycerol mass flow rate ratio (W/m_g_l_y_c_e_r_o_l = 10–40 g catalyst min/g glycerol) during the aqueous phase reforming (APR) of a glycerol solution obtained from the production of biodiesel. The operating conditions exerted a statistically significant influence on the reforming results. Specifically, the global glycerol conversion and the carbon converted into gas and liquid products varied as follows: 4–100%, 1–80% and 16–93%, respectively. The gas phase was made up of H_2 (8–55 vol.%), CO_2 (34–66 vol.%), CO (0–4 vol.%) and CH_4 (6–45 vol.%). The liquid phase consisted of a mixture of alcohols (monohydric: methanol and ethanol; and polyhydric: 1,2-propanediol, 1,2-ethanediol, 2,3-butanediol), aldehydes (acetaldehyde), ketones (C3-ketones: acetone and 2-propanone-1-hydroxy; C4-ketones: 2-butanone-3-hydroxy and 2-butanone-1-hydroxy; and cyclic ketones), carboxylic acids (acetic and propionic acids) and esters (1,2,3-propanetriol-monoacetate), together with unreacted glycerol and water. The relative amount (free of water and un-reacted glycerol) of these compounds in the liquid phase was as follows: monohydric alcohols: 4–47%, polyhydric-alcohols: 14–68%, aldehydes: 0–5%, C3-ketones: 2–33%, C4-ketones: 0–10%, ciclo-ketones: 0–6%, carboxylic acids: 2–43%, and esters: 0–46%. This process turned out to be highly customisable for the

Added value of using a CT coronal reformation to diagnose adnexal torsion

Energy Technology Data Exchange (ETDEWEB)

Jung, Sung Il; Park, Hee Sun; Yim, Young Hee; Jeon, Hae Jeong; Yu, Mi Hye; Kim, Young Jun [Dept. of Radiology, Konkuk University School of Medicine, Research Institute of Medical Science, Seoul (Korea, Republic of); Jeong, Kyung Ah [Dept. of Obstetrics and Gynecology, School of Medicine, Ewha Womans University, Seoul (Korea, Republic of)

2015-08-15

To evaluate the increased value of using coronal reformation of a transverse computed tomography (CT) scan for detecting adnexal torsion. This study included 106 woman suspected of having adnexal torsion who underwent CT with coronal reformations and subsequent surgical exploration. Two readers independently recorded the CT findings, such as the thickening of a fallopian tube, twisting of the adnexal pedicle, eccentric smooth wall thickening of the torsed adnexal mass, eccentric septal thickening of the torsed adnexal mass, eccentric poor enhancement of the torsed adnexal mass, uterine deviation to the twisted side, ascites or infiltration of pelvic fat, and the overall impression of adnexal torsion with a transverse scan alone or combined with coronal reformation and a transverse scan. The areas under the receiver operating characteristic curves (AUCs), sensitivity, specificity, and positive predictive value were used to compare diagnostic performance. Fifty-two patients were confirmed to have adnexal torsion. The addition of coronal reformations to the transverse scan improved AUCs for readers 1 and 2 from 0.74 and 0.75 to 0.92 and 0.87, respectively, for detecting adnexal torsion (p < 0.001 and p = 0.004, respectively). Sensitivity of CT for detecting twisting of the adnexal pedicle increased significantly for readers 1 and 2 from 0.27 and 0.29 with a transverse scan alone to 0.79 and 0.77 with a combined coronal reformation and a transverse scan, respectively (p < 0.001 and p < 0.001, respectively). Use of a coronal reformation with transverse CT images improves detection of adnexal torsion.

Introducing a complex health innovation--primary health care reforms in Estonia (multimethods evaluation).

Science.gov (United States)

Atun, Rifat Ali; Menabde, Nata; Saluvere, Katrin; Jesse, Maris; Habicht, Jarno

2006-11-01

All post-Soviet countries are trying to reform their primary health care (PHC) systems. The success to date has been uneven. We evaluated PHC reforms in Estonia, using multimethods evaluation: comprising retrospective analysis of routine health service data from Estonian Health Insurance Fund and health-related surveys; documentary analysis of policy reports, laws and regulations; key informant interviews. We analysed changes in organisational structure, regulations, financing and service provision in Estonian PHC system as well as key informant perceptions on factors influencing introduction of reforms. Estonia has successfully implemented and scaled-up multifaceted PHC reforms, including new organisational structures, user choice of family physicians (FPs), new payment methods, specialist training for family medicine, service contracts for FPs, broadened scope of services and evidence-based guidelines. These changes have been institutionalised. PHC effectiveness has been enhanced, as evidenced by improved management of key chronic conditions by FPs in PHC setting and reduced hospital admissions for these conditions. Introduction of PHC reforms - a complex innovation - was enhanced by strong leadership, good co-ordination between policy and operational level, practical approach to implementation emphasizing simplicity of interventions to be easily understood by potential adopters, an encircling strategy to roll-out which avoided direct confrontations with narrow specialists and opposing stakeholders in capital Tallinn, careful change-management strategy to avoid health reforms being politicized too early in the process, and early investment in training to establish a critical mass of health professionals to enable rapid operationalisation of policies. Most importantly, a multifaceted and coordinated approach to reform - with changes in laws; organisational restructuring; modifications to financing and provider payment systems; creation of incentives to enhance

Reforming of Liquid Hydrocarbons in a Novel Hydrogen-Selective Membrane-Based Fuel Processor

Energy Technology Data Exchange (ETDEWEB)

Shamsuddin Ilias

2006-03-10

In this work, asymmetric dense Pd/porous stainless steel composite membranes were fabricated by depositing palladium on the outer surface of the tubular support. The electroless plating method combined with an osmotic pressure field was used to deposit the palladium film. Surface morphology and microstructure of the composite membranes were characterized by SEM and EDX. The SEM and EDX analyses revealed strong adhesion of the plated pure palladium film on the substrate and dense coalescence of the Pd film. Membranes were further characterized by conducting permeability experiments with pure hydrogen, nitrogen, and helium gases at temperatures from 325 to 450 C and transmembrane pressure differences from 5 to 45 psi. The permeation results showed that the fabricated membranes have both high hydrogen permeability and selectivity. For example, the hydrogen permeability for a composite membrane with a 20 {micro}m Pd film was 3.02 x 10{sup -5} moles/m{sup 2}.s.Pa{sup 0.765} at 450 C. Hydrogen/nitrogen selectivity for this composite membrane was 1000 at 450 C with a transmembrane pressure difference of 14.7 psi. Steam reforming of methane is one of the most important chemical processes in hydrogen and syngas production. To investigate the usefulness of palladium-based composite membranes in membrane-reactor configuration for simultaneous production and separation of hydrogen, steam reforming of methane by equilibrium shift was studied. The steam reforming of methane using a packed-bed inert membrane tubular reactor (PBIMTR) was simulated. A two-dimensional pseudo-homogeneous reactor model with parallel flow configuration was developed for steam reforming of methane. The shell volume was taken as the feed and sweep gas was fed to the inside of the membrane tube. Radial diffusion was taken into account for concentration gradient in the radial direction due to hydrogen permeation through the membrane. With appropriate reaction rate expressions, a set of partial differential

The political economy of electricity dispatch reform in China

International Nuclear Information System (INIS)

Kahrl, Fredrich; Williams, James H.; Hu, Junfeng

2013-01-01

The transition to a cleaner and more cost-efficient electricity system in China is political-economic as well as technological. An example is the reform of China's method of dispatching power plants, which potentially affects the economic relationships between consumers and producers, between grid and generating companies, and between central and provincial governments. Historically, coal-fired power plants in China all received roughly the same number of operating hours, regardless of efficiency or cost. In 2007, Chinese government agencies began to pilot “energy efficient dispatch,” which requires that generators be dispatched on the basis of thermal efficiency. Using a case study of Guangxi Zhuang Autonomous Region in southern China, we evaluated potential energy and cost savings from a change to energy efficient dispatch. We found that the savings are at best relatively small, because large, efficient generators already account for a significant share of total generation. Moreover, as an administrative policy that does not change economic incentives, energy efficient dispatch exacerbates imbalances and center-provincial tensions in the current system. We argue that incentive-based dispatch reform is likely to produce better outcomes, and that the keys to this reform are empowering an independent regulator with pricing authority and establishing a formal, transparent ratemaking process. - Highlights: ► Savings from China's energy efficient dispatch (EED) policy are at best relatively small. ► EED exacerbates imbalances and center-provincial tensions in China's current power system. ► Incentive-based dispatch reform is likely to produce better outcomes than EED. ► Keys to reform are independent regulation and a formal, transparent ratemaking process. ► Transition to cleaner, cost-efficient electricity system in China is political-economic as well as technological.

Influence of substrates on nitrogen removal performance and microbiology of anaerobic ammonium oxidation by operating two UASB reactors fed with different substrate levels

International Nuclear Information System (INIS)

Tang Chongjian; Zheng Ping; Hu Baolan; Chen Jianwei; Wang Caihua

2010-01-01

Both ammonium and nitrite act as substrates as well as potential inhibitors of anoxic ammonium-oxidizing (Anammox) bacteria. To satisfy demand of substrates for Anammox bacteria and to prevent substrate inhibition simultaneously; two strategies, namely high or low substrate concentration, were carefully compared in the operation of two Anammox upflow anaerobic sludge blanket (UASB) reactors fed with different substrate concentrations. The reactor working at relatively low influent substrate concentration (NO 2 - N, 240 mg-N L -1 ) was shown to avoid the inhibition caused by nitrite and free ammonia. Using the strategy of low substrate concentration, a record super high volumetric nitrogen removal rate of 45.24 kg-N m -3 day -1 was noted after the operation of 230 days. To our knowledge, such a high value has not been reported previously. The evidence from transmission electron microscopy (TEM) showed that the morphology and ultrastructure of the Anammox cells in both the reactor enrichments was different.

Influence of substrates on nitrogen removal performance and microbiology of anaerobic ammonium oxidation by operating two UASB reactors fed with different substrate levels

Energy Technology Data Exchange (ETDEWEB)

Tang Chongjian [Department of Environmental Engineering, Zhejiang University, Hangzhou 310029 (China); Zheng Ping, E-mail: pzheng@zju.edu.cn [Department of Environmental Engineering, Zhejiang University, Hangzhou 310029 (China); Hu Baolan; Chen Jianwei; Wang Caihua [Department of Environmental Engineering, Zhejiang University, Hangzhou 310029 (China)

2010-09-15

Both ammonium and nitrite act as substrates as well as potential inhibitors of anoxic ammonium-oxidizing (Anammox) bacteria. To satisfy demand of substrates for Anammox bacteria and to prevent substrate inhibition simultaneously; two strategies, namely high or low substrate concentration, were carefully compared in the operation of two Anammox upflow anaerobic sludge blanket (UASB) reactors fed with different substrate concentrations. The reactor working at relatively low influent substrate concentration (NO{sub 2}{sup -}N, 240 mg-N L{sup -1}) was shown to avoid the inhibition caused by nitrite and free ammonia. Using the strategy of low substrate concentration, a record super high volumetric nitrogen removal rate of 45.24 kg-N m{sup -3} day{sup -1} was noted after the operation of 230 days. To our knowledge, such a high value has not been reported previously. The evidence from transmission electron microscopy (TEM) showed that the morphology and ultrastructure of the Anammox cells in both the reactor enrichments was different.

Aspects of financial history in Romania. Reform and reformers. The financial tax reform accomplished BY Nicolae Titulescu

Directory of Open Access Journals (Sweden)

Ciobanu, R.

2012-01-01

Full Text Available This paper presents a brief history of the financial reform designed by Nicolae Titulescu at the beginning of the 1920’s. His tax reform law was formulated after thorough research of other European tax systems. He tried to implement it while he was Minister of Finance. Even though the law was adopted, it was never enacted. It met a certain amount of controversy in the Assembly of Deputies. The analysis made also tries to explain the cedular tax system.

Power sector reform in Maharashtra, India

International Nuclear Information System (INIS)

Totare, Ninad P.; Pandit, Shubha

2010-01-01

In early 1990 the power sector in India required an initial set of reforms due to the scarcity of financial resources and its deteriorating technical and commercial efficiency. The Indian power sector is now going through a second stage of reforms in which restructuring of electric supply utilities has taken place. The Maharashtra State Electricity Board (MSEB) initiated reforms in 2005 by dividing the state electricity board into four separate companies. In this paper, the situations that led to the reform of the MSEB and the scope of the work required for an action plan initiated by the state electricity distribution company in the context of the proposed Key Performance Index are discussed. The post-reform status of the distribution company is analyzed with selected key parameters. The study also analyzes the electricity supply model implemented and the effect of a multi-year tariff plan as one of the key milestones of the tariff structure. The various new projects implemented by the distribution company to improve consumer services and the reform experiences of the other states are discussed, along with the future scope of the present reform process. (author)

Welfare implication of reforming energy consumption subsidies

International Nuclear Information System (INIS)

Breton, Michèle; Mirzapour, Hossein

2016-01-01

Reforming energy consumption subsidies, in particular for fossil fuels, has been frequently referred to as a quick-win policy to enhance environmental mitigation. In addition, the removal of such subsidies may release a sizeable portion of a country's national budget for use on more productive targets. One of the most recognized challenges of such reform is “selling” the new energy prices to citizens, particularly those with a more fragile purchasing power. Several empirical and technical studies have prescribed that the reform might be supported by a direct compensation mechanism in order to ensure feasibility. This is what was done during the recent energy subsidy reform in Iran. However, the compensation mechanism implemented in Iran's reform was successful at the beginning, but did not proceed as expected. This has raised questions about the feasibility and sustainability of the direct compensation mechanism, and even of the reform policy itself. In this paper, we consider a stylized model where direct compensation is the instrument proposed to restore consumers’ utility against increased energy prices. We find that, when prices of Other Goods are affected by the announced reform policy, the feasibility of a subsidy reform critically depends on the value of certain parameters: the initial subsidization rate, the share of energy in the consumers’ bundle, and the energy portion of price of Other Goods. - Highlights: • A model of energy subsidy reform with direct compensation is proposed. • Feasibility of the reform is related to three key parameters. • An illustrative example using data from the recent Iranian reform is discussed.

Bio-oil steam reforming, partial oxidation or oxidative steam reforming coupled with bio-oil dry reforming to eliminate CO{sub 2} emission

Energy Technology Data Exchange (ETDEWEB)

Hu, Xun [State Key Laboratory for Oxo Synthesis and Selective Oxidation, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Graduate School of Chinese Academy of Sciences, Beijing 100039 (China); Lu, Gongxuan [State Key Laboratory for Oxo Synthesis and Selective Oxidation, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China)

2010-07-15

Biomass is carbon-neutral and utilization of biomass as hydrogen resource shows no impact on atmospheric CO{sub 2} level. Nevertheless, a significant amount of CO{sub 2} is always produced in biomass gasification processes. If the CO{sub 2} produced can further react with biomass, then the biomass gasification coupled with CO{sub 2} reforming of biomass will result in a net decrease of CO{sub 2} level in atmosphere and produce the chemical raw material, syngas. To achieve this concept, a ''Y'' type reactor is developed and applied in bio-oil steam reforming, partial oxidation, or oxidative steam reforming coupled with CO{sub 2} reforming of bio-oil to eliminate the emission of CO{sub 2}. The experimental results show that the reaction systems can efficiently suppress the emission of CO{sub 2} from various reforming processes. The different coupled reaction systems generate the syngas with different molar ratio of CO/H{sub 2}. In addition, coke deposition is encountered in the different reforming processes. Both catalysts and experimental parameters significantly affect the coke deposition. Ni/La{sub 2}O{sub 3} catalyst shows much higher resistivity toward coke deposition than Ni/Al{sub 2}O{sub 3} catalyst, while employing high reaction temperature is vital for elimination of coke deposition. Although the different coupled reaction systems show different characteristic in terms of product distribution and coke deposition, which all can serve as methods for storage of the carbon from fossil fuels or air. (author)

Review of experience of major reform of railways of the world

Directory of Open Access Journals (Sweden)

L.V.Martsenyuk

2013-02-01

Full Text Available Purpose. To evaluate the possibility of the foreign countries experience in the reforming of railway transport of Ukraine. Methodology. On the basis of comparative analysis the suitability of foreign experience of infrastructure branches reformation, dividing the range of problems to the questions of ideological and methodological character, and of course, taking into account the peculiarities of the situation in Ukraine is estimated. As for the first range of problems, it is, first of all, the choice of the form of ownership. Findings. Experience shows that both types of property have not only the beneficial but also the negative impacts. On the one hand, it is the state railways have the conditions for development and implementation of the new technologies such as high-speed trains, construction of which, as well as construction of specialized lines would be impossible without appropriate research base, and without public funding. On the other – private companies. operating on a concession basis, usually provide a higher level of services at affordable rates. Originality. It can be concluded that there is no direct correlation between the ownership form of railroads and economic or qualitative characteristics of their work. The necessity of various forms of technical and economic relationships, the existence of separate railways at the regional and local levels, which offers a great opportunity to overcome the monotony of operation, in the development of railways towards greater differentiation of service levels is proved. This however does not mean that the only alternative is to sell concessions to private enterprises, especially if the transfer of ownership is not supplemented by commitments to support public transport at a certain level. Practical value. Examples of positive governance are opposed to the equal examples of private management and vice versa. Deep analysis of reforming experience of world leading railways will prevent from

Economic Reforms and Constitutional Transition

OpenAIRE

Jeffrey D. Sachs; Wing Thye Woo; Xiaokai Yang

2000-01-01

This paper investigates the relationship between economic reforms and constitutional transition, which has been neglected by many transition economists. It is argued that assessment of reform performance might be very misleading if it is not recognized that economic reforms are just a small part of large scale of constitutional transition. Rivalry and competition between states and between political forces within each country are the driving forces for constitutional transition. We use Russia...

Impact of reform and privatisation on employees a case study of power sector reform in Orissa, India

International Nuclear Information System (INIS)

Kundu, Goutam Kumar; Mishra, Bidhu Bhusan

2012-01-01

Orissa is the first state in India to have undergone reform in the power sector with the Government withdrawing its control. The state government owned integrated Electricity Board which was responsible for generation, transmission and distribution of electricity was unbundled into separate generating, transmitting, distributing and trading companies. The structure and ownership changed. The purpose of this paper is to examine the impact of the reform and privatization on employees. The impact of reform on employees was measured with the help of multiple regression models. The variables represent the parameters that employees are most interested in, and the regression coefficients represent the weights of the corresponding variables. The data were collected using a survey methodology. The impact of reform was observed to be mixed one. Some employees felt benefits while others mentioned negative impact. The study revealed beneficial aspects of reform and areas with no benefits. - Highlights: ► Employee benefit is a linear function of 11 variables. ► Eleven variables predict 95.8% of employees benefit. ► Money received by the employees increased after reform. ► Employees benefit due to reform is a mixed one.

Modeling of electrochemistry and steam-methane reforming performance for simulating pressurized solid oxide fuel cell stacks

Energy Technology Data Exchange (ETDEWEB)

Recknagle, Kurtis P.; Ryan, Emily M.; Koeppel, Brian J.; Mahoney, Lenna A.; Khaleel, Moe A. [Pacific Northwest National Laboratory, Richland, WA 99352 (United States)

2010-10-01

This paper examines the electrochemical and direct internal steam-methane reforming performance of the solid oxide fuel cell when subjected to pressurization. Pressurized operation boosts the Nernst potential and decreases the activation polarization, both of which serve to increase cell voltage and power while lowering the heat load and operating temperature. A model considering the activation polarization in both the fuel and the air electrodes was adopted to address this effect on the electrochemical performance. The pressurized methane conversion kinetics and the increase in equilibrium methane concentration are considered in a new rate expression. The models were then applied in simulations to predict how the distributions of direct internal reforming rate, temperature, and current density are effected within stacks operating at elevated pressure. A generic 10 cm counter-flow stack model was created and used for the simulations of pressurized operation. The predictions showed improved thermal and electrical performance with increased operating pressure. The average and maximum cell temperatures decreased by 3% (20 C) while the cell voltage increased by 9% as the operating pressure was increased from 1 to 10 atm. (author)

Control and Experimental Characterization of a Methanol Reformer for a 350 W High Temperature Polymer Electrolyte Membrane Fuel Cell system

DEFF Research Database (Denmark)

Andreasen, Søren Juhl; Kær, Søren Knudsen; Jensen, Hans-Christian Becker

, i.e. cathode and anode gas flows and temperature by using mass flow controllers and controlled heaters. Using this system the methanol reformer is characterized in its different operating points, both steady-state but also dynamically. Methanol steam reforming is a well known process, and provides...... and burner and the behaviour of the CO concentration of the reformate gas....... the high temperature waste gas from a cathode air cooled 45 cell HTPEM fuel cell stack. The MEAs used are BASF P2100 which use phosphoric acid doped polybenzimidazole type membranes; an MEA with high CO tolerance and no complex humidity requirements. The methanol reformer used is integrated into a compact...

49 CFR 260.13 - Credit reform.

Science.gov (United States)

2010-10-01

... appropriations, direct payment of a Credit Risk Premium by the Applicant or a non-Federal infrastructure partner... 49 Transportation 4 2010-10-01 2010-10-01 false Credit reform. 260.13 Section 260.13... REHABILITATION AND IMPROVEMENT FINANCING PROGRAM Overview § 260.13 Credit reform. The Federal Credit Reform Act...

Policy and Practice Model of Public-Private Partnership in Public Hospitals during the New Medical Reform Period.

Science.gov (United States)

Zhang, Ju-Yang; Long, Ru-Yin; Yan, Hai; Yang, Qing; Yang, Bo

2016-01-01

Purpose: Since the beginning of the new health care reform in 2009, the state has illustrated the top design and health care improvement strategy of "encouraging social capital to participate in the reform of public hospitals", in accordance with the program's general objective. All areas have been explored on this matter and the results obtained are very interesting, not to mention the acquisition of significant experience. At present, the existing business models in China are mainly the following: Rebuild-Operate-Transfer (ROT), franchise business model, Build-Own-Operate-Transfer (BOOT) model, mixed ownership model and business insurance model. This paper introduces a variety of alternative models, and provides a simple analysis of the advantages and disadvantages. Moreover, for the reform of public hospitals, the government shares should go into franchise mode or mixed ownership, and all property rights should be transferred to the government to ensure the conservation and proliferation of state-owned assets.

IQC-based robust stability analysis for LPV control of doubly-fed induction generators

NARCIS (Netherlands)

Tien, H. N.; Scherer, C. W.; Scherpen, J. M. A.

2008-01-01

Parameters of electrical machines are usually varying with time in a smooth way due to changing operating conditions, such as variations in the machine temperature and/or the magnetic saturation. This paper is concerned with robust stability analysis of controlled Doubly-Fed Induction Generators

Reforming health care in Hungary.

Science.gov (United States)

Császi, L; Kullberg, P

1985-01-01

Over the past two decades Hungary has initiated a series of social and economic reforms which have emphasized decentralization of control and the reintroduction of market mechanisms into the socialized economy. These reforms both reflect and reinforce a changing social structure, in particular the growing influence of upper class special interest groups. Market reforms are an expression of concurrent ideological shifts in Hungarian society. We examined the political significance of three recent proposals to reform health services against the backdrop of broader social and economic changes taking place. The first proposes a bureaucratic reorganization, the second, patient co-payments, and the third, a voucher system. The problems each proposal identifies, as well as the constituency each represents, reveal a trend toward consolidation of class structure in Hungary. Only one of these proposals has any potential to democratize the control and management of the heath care system. Moreover, despite a governmental push toward decentralization, two of these proposals would actually increase centralized bureaucratic control. Two of the reforms incorporate market logic into their arguments, an indication that the philosophical premises of capitalism are re-emerging as an important component of the Hungarian world-view. In Hungary, as well as in other countries, social analysis of proposed health care reforms can effectively illuminate the social and political dynamics of the larger society.

Centralised control of wind farm with doubly-fed induction generators

DEFF Research Database (Denmark)

Hansen, A.D.; Sørensen, Poul Ejnar; Iov, F.

2005-01-01

This paper describes the development of an advanced wind farm controller for a wind farm made-up exclusively of doubly-fed generators. The overall aim of such controller is to enable the wind farms to behave as active controllable components in the power system. The attention is mainly drawn...... to the ability of the wind farm control strategy to regulate the wind farm power production to the reference power ordered by the system operators. The performance of the control strategy is assessed and discussed by means of normal operation simulations of a grid connected wind farm....

An estimation of the water balance in a reformer/fuel-cells system

Energy Technology Data Exchange (ETDEWEB)

Jovan, Vladimir [Jo-ef Stefan Institute and Centre of Excellence Low-Carbon Technologies (Slovenia); Cufar, Alja [University of Ljubljana, Faculty of Mathematics and Physics (Slovenia)], e-mail: vladimir.jovan@ijs.si

2011-07-01

PEM fuel cells use hydrogen as fuel. Since it is a very light element, its energy density is small despite its high caloric value. Thus hydrogen storage requires a lot of space. One possible solution is simultaneous production of hydrogen from higher-density materials, such as methanol. The object of this paper is to determine what is the total water balance in a system consisting of a methanol reformer and a fuel-cells-based generator set, and to determine if water should be supplied to, or removed from, the system. Based on relatively little information obtained from technical sources and on some simple assumptions, this paper presents a model which helps to determine the actual water balance in the system. In conclusion, commercially available fuel-cell systems with realistic water production can be used for fuel reforming purposes in the methanol reformer. It is also shown that under normal operating conditions, and using commercially available devices, there is always an excess of water produced.

Methanol steam-reforming in a catalytic fixed bed reactor

Energy Technology Data Exchange (ETDEWEB)

Duesterwald, H G; Hoehlein, B; Kraut, H; Meusinger, J; Peters, R [Research Centre Juelich (KFA) (Germany). Inst. of Energy Process Engineering; Stimming, U [Technische Univ. Muenchen, Garching (Germany). Inst. fuer Festkoerperphysik und Techn. Phys.

1997-12-01

Designing an appropriate methanol steam reformer requires detailed knowledge about the processes within such a reactor. Thus, the axial temperature and concentration gradients and catalyst ageing were investigated. It was found that for a fresh catalyst load, the catalyst located in the reactor entrance was most active during the experiment. The activity of this part of the catalyst bed decreased after some time of operation due to ageing. With further operation, the most active zone moved through the catalyst bed. From the results concerning hydrogen production and catalyst degradation, the necessary amount of catalyst for a mobile PEMFC-system can be estimated. (orig.)

Reforming Social Policy: Changing Perspectives on Sustainable ...

International Development Research Centre (IDRC) Digital Library (Canada)

Reforming Social Policy presents an overview of social policy reforms currently ... It shows how some experimental approaches to reform have worked in different ... and students in development studies and social sciences; policymakers and ...

Prototype CIRCE plant - industrial demonstration of heavy water production from reformed hydrogen source

International Nuclear Information System (INIS)

Spagnolo, D.A.; Boniface, H.A.; Sadhankar, R.R.; Everatt, A.E.; Miller, A.I.; Blouin, J.

2002-01-01

Heavy water (D 2 0) production has been dominated by the Girdler-Sulphide (G-S) process, which suffers several intrinsic disadvantages that lead to high production costs. Processes based on hydrogen/water exchange have become more attractive with the development of proprietary wetproofed catalysts by AECL. One process that is synergistic with industrial hydrogen production by steam methane reforming (SMR), the Combined Industrial Reforming and Catalytic Exchange (CIRCE) process, offers the best prospect for commercialization. SMRs are common globally in the oil-upgrading and ammonia industries. To study the CIRCE process in detail, AECL, in collaboration with Air Liquide Canada, constructed a prototype CIRCE plant (PCP) in Hamilton, Ontario. The plant became fully operational in 2000 July and is expected to operate to at least late fall of 2002. To-date, plant operation has confirmed the adequacy of the design and the capability of enriching deuterium to produce heavy water without compromising hydrogen production. The proprietary wetproofed catalyst has performed as expected, both in activity and in robustness. (author)

Health sector reform and public sector health worker motivation: a conceptual framework.

Science.gov (United States)

Franco, Lynne Miller; Bennett, Sara; Kanfer, Ruth

2002-04-01

Motivation in the work context can be defined as an individual's degree of willingness to exert and maintain an effort towards organizational goals. Health sector performance is critically dependent on worker motivation, with service quality, efficiency, and equity, all directly mediated by workers' willingness to apply themselves to their tasks. Resource availability and worker competence are essential but not sufficient to ensure desired worker performance. While financial incentives may be important determinants of worker motivation, they alone cannot and have not resolved all worker motivation problems. Worker motivation is a complex process and crosses many disciplinary boundaries, including economics, psychology, organizational development, human resource management, and sociology. This paper discusses the many layers of influences upon health worker motivation: the internal individual-level determinants, determinants that operate at organizational (work context) level, and determinants stemming from interactions with the broader societal culture. Worker motivation will be affected by health sector reforms which potentially affect organizational culture, reporting structures, human resource management, channels of accountability, types of interactions with clients and communities, etc. The conceptual model described in this paper clarifies ways in which worker motivation is influenced and how health sector reform can positively affect worker motivation. Among others, health sector policy makers can better facilitate goal congruence (between workers and the organizations they work for) and improved worker motivation by considering the following in their design and implementation of health sector reforms: addressing multiple channels for worker motivation, recognizing the importance of communication and leadership for reforms, identifying organizational and cultural values that might facilitate or impede implementation of reforms, and understanding that reforms

Plasma devices for hydrocarbon reformation

KAUST Repository

Cha, Min

2017-01-01

Plasma devices for hydrocarbon reformation are provided. Methods of using the devices for hydrocarbon reformation are also provided. The devices can include a liquid container to receive a hydrocarbon source, and a plasma torch configured

Production of hydrogen via methane reforming using atmospheric pressure microwave plasma

Energy Technology Data Exchange (ETDEWEB)

Jasinski, Mariusz; Dors, Miroslaw [Centre for Plasma and Laser Engineering, The Szewalski Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Fiszera 14, 80-952 Gdansk (Poland); Mizeraczyk, Jerzy [Centre for Plasma and Laser Engineering, The Szewalski Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Fiszera 14, 80-952 Gdansk (Poland); Department of Marine Electronics, Gdynia Maritime University, Morska 83, 81-225 Gdynia (Poland)

2008-06-15

In this paper, results of hydrogen production via methane reforming in the atmospheric pressure microwave plasma are presented. A waveguide-based nozzleless cylinder-type microwave plasma source (MPS) was used to convert methane into hydrogen. Important advantages of the presented waveguide-based nozzleless cylinder-type MPS are: stable operation in various gases (including air) at high flow rates, no need for a cooling system, and impedance matching. The plasma generation was stabilized by an additional swirled nitrogen flow (50 or 100 l min{sup -1}). The methane flow rate was up to 175 l min{sup -1}. The absorbed microwave power could be changed from 3000 to 5000 W. The hydrogen production rate and the corresponding energy efficiency in the presented methane reforming by the waveguide-based nozzleless cylinder-type MPS were up to 255 g[H{sub 2}] h{sup -1} and 85 g[H{sub 2}] kWh{sup -1}, respectively. These parameters are better than those typical of the conventional methods of hydrogen production (steam reforming of methane and water electrolysis). (author)

Environmental consequences of electricity sector reforms

International Nuclear Information System (INIS)

Wohlgemuth, N.

1999-01-01

Worldwide, the electricity industry is in the process of undergoing fundamental transitions. The reform process typically involves one or more of the following changes: commercialisation, privatisation, unbundling/restructuring and introduction of competition. The environmental impacts of these changes pull in different directions. There is concern that restructured electricity markets may not always incorporate adequately the environmental impacts of electricity resource development and consumption decisions. However, the electricity sector reform process also offers an opportunity to promote positive environmental changes: because the sector is already in flux, it may be easier to address environmental issues. The paper gives an overview of power sector reform in six countries where reforms have already been implemented, and concludes that reform measures will have to be accompanied by competitively neutral regulations in order to stimulate investment in environmentally sound technologies, including renewable and energy efficient technologies. (author)

Mount Sinai Hospital's approach to Ontario's Health System Funding Reform.

Science.gov (United States)

Chalk, Tyler; Lau, Davina; Morgan, Matthew; Dietrich, Sandra; Beduz, Mary Agnes; Bell, Chaim M

2014-01-01

In April 2012, the Ontario government introduced Health System Funding Reform (HSFR), a transformational shift in how hospitals are funded. Mount Sinai Hospital recognized that moving from global funding to a "patient-based" model would have substantial operational and clinical implications. Adjusting to the new funding environment was set as a top corporate priority, serving as the strategic basis for re-examining and redesigning operations to further improve both quality and efficiency. Two years into HSFR, this article outlines Mount Sinai Hospital's approach and highlights key lessons learned. Copyright © 2014 Longwoods Publishing.

ICT AND NIGERIAN BANKS REFORMS: ANALYSIS OF ANTICIPATED IMPACTS IN SELECTED BANKS

OpenAIRE

Osabuohien Evans S.C

2008-01-01

Banking has become highly Information Communication Technology (ICT) based and due to its intersectoral link, is reaping the benefits of technological revolution as evidenced by its application in most of its operations. This study empirical analyzes the anticipated role ICT has in enhancing the operations of selected Nigerian banks in the light of current reforms. Primary data was employed, which was analyzed using cross-tabulations and regression technique built on the framework of technica...

Steam reforming of low-level mixed waste. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-06-01

ThermoChem has successfully designed, fabricated and operated a nominal 90 pound per hour Process Development Unit (PDU) on various low-level mixed waste surrogates. The design, construction, and testing of the PDU as well as performance and economic projections for a 300-lb/hr demonstration and commercial system are described. The overall system offers an environmentally safe, non-incinerating, cost-effective, and publicly acceptable method of processing LLMW. The steam-reforming technology was ranked the No. 1 non-incineration technology for destruction of hazardous organic wastes in a study commissioned by the Mixed Waste Focus Area and published in April 1997. The ThermoChem steam-reforming system has been developed over the last 13 years culminating in this successful test campaign on LLMW surrogates. Six surrogates were successfully tested including a 750-hour test on material simulating a PCB- and Uranium-contaminated solid waste found at the Portsmouth Gaseous Diffusion Plant. The test results indicated essentially total (> 99.9999%) destruction of RCRA and TSCA hazardous halogenated organics, significant levels of volume reduction (> 400 to 1), and retention of radionuclides in the volume-reduced solids. Economic evaluations have shown the steam-reforming system to be very cost competitive with more conventional and other emerging technologies.

Steam reforming of low-level mixed waste. Final report

International Nuclear Information System (INIS)

1998-06-01

ThermoChem has successfully designed, fabricated and operated a nominal 90 pound per hour Process Development Unit (PDU) on various low-level mixed waste surrogates. The design, construction, and testing of the PDU as well as performance and economic projections for a 300-lb/hr demonstration and commercial system are described. The overall system offers an environmentally safe, non-incinerating, cost-effective, and publicly acceptable method of processing LLMW. The steam-reforming technology was ranked the No. 1 non-incineration technology for destruction of hazardous organic wastes in a study commissioned by the Mixed Waste Focus Area and published in April 1997. The ThermoChem steam-reforming system has been developed over the last 13 years culminating in this successful test campaign on LLMW surrogates. Six surrogates were successfully tested including a 750-hour test on material simulating a PCB- and Uranium-contaminated solid waste found at the Portsmouth Gaseous Diffusion Plant. The test results indicated essentially total (> 99.9999%) destruction of RCRA and TSCA hazardous halogenated organics, significant levels of volume reduction (> 400 to 1), and retention of radionuclides in the volume-reduced solids. Economic evaluations have shown the steam-reforming system to be very cost competitive with more conventional and other emerging technologies

Fluidized Bed Steam Reforming of INEEL SBW Using THORsm Mineralizing Technology

Energy Technology Data Exchange (ETDEWEB)

Arlin L. Olson; Nicholas R. Soelberg; Douglas W. Marshall; Gary L. Anderson

2004-12-01

Sodium bearing waste (SBW) disposition is one of the U.S. Department of Energy (DOE) Idaho Operation Office’s (NE-ID) and State of Idaho’s top priorities at the Idaho National Engineering and Environmental Laboratory (INEEL). Many studies have resulted in the identification of five treatment alternatives that form a short list of perhaps the most appropriate technologies for the DOE to select from. The alternatives are (a) calcination with maximum achievable control technology (MACT) upgrade, (b) steam reforming, (c) cesium ion exchange (CsIX) with immobilization, (d) direct evaporation, and (e) vitrification. Each alternative has undergone some degree of applied technical development and preliminary process design over the past four years. DOE desired further experimental data, with regard to steam reforming technology, to make informed decisions concerning selection of treatment technology for SBW. Mineralizing steam reforming technology, offered by THOR Treatment Technologies, LLC would produce a denitrated, granular mineral waste form using a high-temperature fluidized bed process. A pilot scale demonstration of the technology was performed in a 15-cm-diameter reactor vessel September 27 through October 1, 2004. The pilot scale equipment is owned by the DOE, and located at the Science and Technology Applications Research (STAR) Center in Idaho Falls, ID. Flowsheet chemistry and operational parameters were defined through a collaborative effort involving Idaho National Engineering and Environmental Laboratory, Savannah River National Laboratory (SRNL), and THOR Treatment Technologies personnel. Personnel from Science Applications International Corporation, owners of the STAR Center, operated the pilot plant. The pilot scale test was terminated as planned after achieving a total of 100 hrs of cumulative/continuous processing operation. About 230 kg of SBW surrogate were processed that resulted in about 88 kg of solid product, a mass reduction of about 62

Feeding motivation and plasma metabolites in pregnant sows fed diets rich in dietary fiber either once or twice daily

DEFF Research Database (Denmark)

Jensen, Margit Bak; Pedersen, Lene Juul; Theil, Peter Kappel

2012-01-01

in an operant conditioning test, and samples of peripheral blood were taken in a balanced design, at 0900, 1200, 1900, and 0700 h, corresponding to 1, 4, 11, and 23 h after feeding for restricted sows fed once daily. No differences in the feeding motivation were found between the 4 restricted diets at any......, indicating that feeding twice daily reduced feeding motivation during the night compared with feeding once daily. Among restricted-fed sows, plasma concentrations of short-chain fatty acids (SCFA) were greater in sows fed high-fiber diets compared with the control (P = 0.02). Nonesterified fatty acid...... level of fiber in the diet of restrictedly fed sows did not reduce their feeding motivation irrespective of fiber source....

Applications of solar reforming technology

Energy Technology Data Exchange (ETDEWEB)

Spiewak, I. [Weizmann Inst. of Science, Rehovoth (Israel); Tyner, C.E. [Sandia National Labs., Albuquerque, NM (United States); Langnickel, U. [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Koeln (Germany)

1993-11-01

Research in recent years has demonstrated the efficient use of solar thermal energy for driving endothermic chemical reforming reactions in which hydrocarbons are reacted to form synthesis gas (syngas). Closed-loop reforming/methanation systems can be used for storage and transport of process heat and for short-term storage for peaking power generation. Open-loop systems can be used for direct fuel production; for production of syngas feedstock for further processing to specialty chemicals and plastics and bulk ammonia, hydrogen, and liquid fuels; and directly for industrial processes such as iron ore reduction. In addition, reforming of organic chemical wastes and hazardous materials can be accomplished using the high-efficiency destruction capabilities of steam reforming. To help identify the most promising areas for future development of this technology, we discuss in this paper the economics and market potential of these applications.

Phase 2 THOR Steam Reforming Tests for Sodium Bearing Waste Treatment

Energy Technology Data Exchange (ETDEWEB)

Nicholas R. Soelberg

2004-01-01

About one million gallons of acidic, hazardous, and radioactive sodium-bearing waste is stored in stainless steel tanks at the Idaho Nuclear Technology and Engineering Center (INTEC), which is a major operating facility of the Idaho National Engineering and Environmental Laboratory. Steam reforming is a candidate technology being investigated for converting the waste into a road ready waste form that can be shipped to the Waste Isolation Pilot Plant in New Mexico for interment. A steam reforming technology patented by Studsvik, Inc., and licensed to THOR Treatment Technologies has been tested in two phases using a Department of Energy-owned fluidized bed test system located at the Science Applications International Corporation (SAIC) Science and Technology Applications Research Center located in Idaho Falls, Idaho. The Phase 1 tests were reported earlier in 2003. The Phase 2 tests are reported here. For Phase 2, the process feed rate, stoichiometry, and chemistry were varied to identify and demonstrate process operation and product characteristics under different operating conditions. Two test series were performed. During the first series, the process chemistry was designed to produce a sodium carbonate product. The second series was designed to produce a more leach-resistant, mineralized sodium aluminosilicate product. The tests also demonstrated the performance of a MACT-compliant off-gas system.

Model-based analysis of CO2 revalorization for di-methyl ether synthesis driven by solar catalytic reforming

International Nuclear Information System (INIS)

Luu, Minh Tri; Milani, Dia; Sharma, Manish; Zeaiter, Joseph; Abbas, Ali

2016-01-01

Highlights: • Solar energy applied for synthesis of di-methyl ether via dry methane reforming. • Concentrated solar energy at receiver reaction zone for syngas generation. • H 2 /CO molar ratio of ‘1’ is maintained via two alternative processing routes. • Assessed three days of operation under different insolation levels. • Improvements of 18.7%, 32.2% and 20% for methane, energy and CO 2 emission intensities. - Abstract: The application of solar energy is investigated for the synthesis of di-methyl ether (DME) in a solar irradiated dry methane reformer (DMR). Solar radiations are concentrated onto a receiver and distributed to the reaction zone to provide necessary energy for syngas (CO and H 2 ) generation. In order to maintain a H 2 /CO molar ratio of ‘1’, as required in DME synthesis, the produced syngas is processed via two alternative routes: solar reformer coupled in parallel with a non-solar reformer (SoR-NSoR) and solar reformer integrated with a water-gas shift reactor (SoR-WGS). It is found that steam methane reforming (SMR) is the most suitable methodology when coupled with a solar reformer due to high H 2 content in the SMR syngas. Further performance analysis is conducted by simulating three days of operation under different insolation levels (high, medium and low irradiations). The simulation results showed that the SoR-WGS configuration produces the highest improvements of 18.7%, 32.2% and 20% in terms of methane, energy and CO 2 emission intensity respectively. This enhanced process performance originates from the exothermic nature of the WGS process which helps in controlling the overall syngas composition, whereas the SoR-NSoR requires fossil based thermal energy to drive the NSoR process to similar control targets. This promising improvement of all metrics in SoR-WGS may stimulate in-depth techno-economic feasibility of this unique solar integration for DME and other synthetic fuels production.

Zinc deprivation of methanol fed anaerobic granular sludge bioreactors

Science.gov (United States)

Fermoso, Fernando G.; Collins, Gavin; Bartacek, Jan

2008-01-01

The effect of omitting zinc from the influent of mesophilic (30 °C) methanol fed upflow anaerobic sludge bed (UASB) reactors, and latter zinc supplementation to the influent to counteract the deprivation, was investigated by coupling the UASB reactor performance to the microbial ecology of the bioreactor sludge. Limitation of the specific methanogenic activity (SMA) on methanol due to the absence of zinc from the influent developed after 137 days of operation. At that day, the SMA in medium with a complete trace metal solution except Zn was 3.4 g CH4-COD g VSS−1 day−1, compared to 4.2 g CH4-COD g VSS−1 day−1 in a medium with a complete (including zinc) trace metal solution. The methanol removal capacity during these 137 days was 99% and no volatile fatty acids accumulated. Two UASB reactors, inoculated with the zinc-deprived sludge, were operated to study restoration of the zinc limitation by zinc supplementation to the bioreactor influent. In a first reactor, no changes to the operational conditions were made. This resulted in methanol accumulation in the reactor effluent after 12 days of operation, which subsequently induced acetogenic activity 5 days after the methanol accumulation started. Methanogenesis could not be recovered by the continuous addition of 0.5 μM ZnCl2 to the reactor for 13 days. In the second reactor, 0.5 μM ZnCl2 was added from its start-up. Although the reactor stayed 10 days longer methanogenically than the reactor operated without zinc, methanol accumulation was observed in this reactor (up to 1.1 g COD-MeOH L−1) as well. This study shows that zinc limitation can induce failure of methanol fed UASB reactors due to acidification, which cannot be restored by resuming the continuous supply of the deprived metal. PMID:18283507

Flicker study on variable speed wind turbines with doubly fed induction generators

DEFF Research Database (Denmark)

Sun, Tao; Chen, Zhe; Blaabjerg, Frede

2005-01-01

to a conclusion that the factors mentioned above have different influences on flicker emission compared with that in the case of the fixed speed wind turbine. Flicker mitigation is realized by output reactive power control of the variable speed wind turbine with doubly fed induction generator. Simulation results...... show the wind turbine output reactive power control provides an effective means for flicker mitigation regardless of mean wind speed, turbulence intensity and short circuit capacity ratio.......Grid connected wind turbines may produce flicker during continuous operation. This paper presents a simulation model of a MW-level variable speed wind turbine with a doubly fed induction generator developed in the simulation tool of PSCAD/EMTDC. Flicker emission of variable speed wind turbines...

Impacts Of Electricity Market Reform And Non-Reform Factors On Technology Uptake: Philippines

International Nuclear Information System (INIS)

2016-01-01

Structure and ownership: The first phase of the reform (1992–2000) encouraged private participation in the generation segment. By 1998, foreign-owned IPPs accounted for around 4800 MW of generating capacity. During the 1990s, over 90% of the new capacity was built by foreign-owned IPPs [86]. In the second phase of the reform (2001 to present), the vertically integrated electricity utility was unbundled, regulatory arrangements including open access to network services were developed and the WESM was created. These changes further promoted private participation in the power sector. Price signals generated from the competitive electricity market act as the main driving force to make new investments in generation. Besides, the pressure from market competition pushes investors to select the most efficient and advanced generating technologies to meet growing demand. In the Visayas region, for example, rapid growth in electricity demand drove up electricity prices, which attracted private investors to build three new coal fired power plants in 2010 and 2011. These plants use low cost and highly efficient circulating fluidized bed technology. Regulatory arrangements: The EPIRA of 2001 established the ERC to promote competition, encourage market development, ensure customer choice and penalize abuse of market power in the electricity industry. The ERC is also mandated by law to maintain a level playing field in the competitive sectors (generation and supply) and to regulate the transmission and distribution sectors. The EPIRA also mandates the ERC to enforce market share limitations wherein no generation company can own, operate or control more than 30% of the total installed generating capacity of a grid and/or more than 25% of the total national installed capacity. The ERC must also ensure that before a generation company can operate and supply power, it must secure a certificate of compliance with all the appropriate licences or clearances (health, environment and

Parametric study of lower-hybrid current drive in the FED-A design

International Nuclear Information System (INIS)

Iida, H.; Ehst, D.A.; Peng, Y.K.M.

1983-08-01

In the FED-A concept, a quasi-steady-state operating scenario is conceived in which the plasma current is maintained by the transformer coil during burn at high density and by the lower hybrid wave during transformer recharge at low density. A parametric study is carried out to obtain optimum plasma and wave parameters in the recharging phase

The Danish Regulatory Reform of Telecommunications

DEFF Research Database (Denmark)

Skouby, Knud Erik

1998-01-01

An overview of the liberalisation process and regulatory reform of telecommunications in Denmark......An overview of the liberalisation process and regulatory reform of telecommunications in Denmark...

The 'reformation' of counselling

Directory of Open Access Journals (Sweden)

G.A. Lotter

2001-08-01

Full Text Available Although the Reformation took place some four hundred years ago, one area in which reformation is really needed today is the counselling of people. Since Wilhelm Wundt started the “study of the mind” in 1879, William James and Sigmund Freud followed and secular psychology gradually has developed to take the “front seat”; hence moving Biblical counselling, which has been practised since the times of the New Testament, to the “back burner”. This development had been going on for the greater part of the 20th century, up to the publication of Competent to Counsel by Jay E. Adams in 1970. In the model for counselling suggested by Adams, the principles of the Reformation of the sixteenth century, Soli Deo Gloria, Soli Scriptura, Soli Fidei, Sola Gratia, etc. were again implemented in assisting and counselling people with personal and interpersonal problems. The epistomological and anthropological approach of secular psychology differs radically from that of Biblical principles, thus necessitating a new “reformation” of counselling. Within this new form counselling, inter alia, implies the following: the Word of God has its rightful place, sin has to be taken seriously and the work of the Holy Spirit should be recognised. In this article it is proposed that the “reformation” of counselling was started by scholars with a Biblical Reformational approach and that this method of counselling followed the parameters of the Reformation of the sixteenth century. This “reformation” developed into a new direction in counselling and still continues today with fascinating new frontiers opening up for Biblical counselling.

The Reformed tradition as public theology

Directory of Open Access Journals (Sweden)

Vuyani S. Vellem

2013-05-01

Full Text Available This article is a South African perspective of a Black African reflection on the publicity of Reformed faith. Whilst the notion of public theology is fairly new, the article argues, it is important to define the ‘public’ of the type of public theology to which Reformed faith and tradition could be linked. As a confessional tradition, Reformed faith is intrinsically public, the article demonstrates. The publicity of this tradition is however ambivalent and tainted. I attempt to show this by discussing two important tenets of the Reformed Tradition: sola scriptura and sola fide, within the festering wounds of Black African colonialism, apartheid and the hegemony of the neoliberal paradigm in the 21st century.

Thinking on Sichuan-Chongqing gas pipeline transportation system reform under market-oriented conditions

Science.gov (United States)

Duan, Yanzhi

2017-01-01

The gas pipeline networks in Sichuan and Chongqing (Sichuan-Chongqing) region have formed a fully-fledged gas pipeline transportation system in China, which supports and promotes the rapid development of gas market in Sichuan-Chongqing region. In the circumstances of further developed market-oriented economy, it is necessary to carry out further the pipeline system reform in the areas of investment/financing system, operation system and pricing system to lay a solid foundation for improving future gas production and marketing capability and adapting itself to the national gas system reform, and to achieve the objectives of multiparty participated pipeline construction, improved pipeline transportation efficiency and fair and rational pipeline transportation prices. In this article, main thinking on reform in the three areas and major deployment are addressed, and corresponding measures on developing shared pipeline economy, providing financial support to pipeline construction, setting up independent regulatory agency to enhance the industrial supervision for gas pipeline transportation, and promoting the construction of regional gas trade market are recommended.

Prototype CIRCE plant-industrial demonstration of heavy-water production from a reformed hydrogen source

Energy Technology Data Exchange (ETDEWEB)

Spagnolo, D.A.; Boniface, H.A.; Sadhankar, R.R.; Everatt, A.E.; Miller, A.I. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada); Blouin, J. [Air Liquide Canada, Hamilton, Ontario (Canada)

2002-09-01

Heavy-water (D{sub 2}0) production has been dominated by the Girdler-Sulphide (G-S) process, which suffers several intrinsic disadvantages that lead to high production costs. Processes based on hydrogen/water exchange have become more attractive with the development of proprietary wetproofed catalysts by AECL. One process that is synergistic with industrial hydrogen production by steam methane reforming (SMR), the combined industrial reforming and catalytic exchange (CIRCE) process, offers the best prospect for commercialization. SMRs are common globally in the oil upgrading and ammonia industries. To study the CIRCE process in detail, AECL, in collaboration with Air Liquide Canada, constructed a prototype CIRCE plant (PCP) in Hamilton, ON. The plant became fully operational in 2000 July and is expected to operate to at least the late fall of 2002. To date, plant operation has confirmed the adequacy of the design and the capability of enriching deuterium to produce heavy water without compromising hydrogen production. The proprietary wetproofed catalyst has performed as expected, both in activity and in robustness. (author)

Prototype CIRCE plant-industrial demonstration of heavy-water production from a reformed hydrogen source

International Nuclear Information System (INIS)

Spagnolo, D.A.; Boniface, H.A.; Sadhankar, R.R.; Everatt, A.E.; Miller, A.I.; Blouin, J.

2002-09-01

Heavy-water (D 2 0) production has been dominated by the Girdler-Sulphide (G-S) process, which suffers several intrinsic disadvantages that lead to high production costs. Processes based on hydrogen/water exchange have become more attractive with the development of proprietary wetproofed catalysts by AECL. One process that is synergistic with industrial hydrogen production by steam methane reforming (SMR), the combined industrial reforming and catalytic exchange (CIRCE) process, offers the best prospect for commercialization. SMRs are common globally in the oil upgrading and ammonia industries. To study the CIRCE process in detail, AECL, in collaboration with Air Liquide Canada, constructed a prototype CIRCE plant (PCP) in Hamilton, ON. The plant became fully operational in 2000 July and is expected to operate to at least the late fall of 2002. To date, plant operation has confirmed the adequacy of the design and the capability of enriching deuterium to produce heavy water without compromising hydrogen production. The proprietary wetproofed catalyst has performed as expected, both in activity and in robustness. (author)

Community Organizing as an Education Reform Strategy

Science.gov (United States)

Renee, Michelle; McAlister, Sara

2011-01-01

Community organizing for school reform offers an urgently needed alternative to traditional approaches to school change. Many current reforms fail to thrive due to lack of trust, understanding, or cultural relevance to the community being targeted. The high turnover of reformers (superintendents, principals, or outside organizations) in high-need…

Performance evaluation and comparison of fuel processors integrated with PEM fuel cell based on steam or autothermal reforming and on CO preferential oxidation or selective methanation

International Nuclear Information System (INIS)

Ercolino, Giuliana; Ashraf, Muhammad A.; Specchia, Vito; Specchia, Stefania

2015-01-01

Highlights: • Modeling of different fuel processors integrated with PEM fuel cell stack. • Steam or autothermal reforming + CO selective methanation or preferential oxidation. • Reforming of different hydrocarbons: gasoline, light diesel oil, natural gas. • 5 kW e net systems comparison via energy efficiency and primary fuel rate consumed. • Highest net efficiency: steam reformer + CO selective methanation based system. - Abstract: The performances of four different auxiliary power unit (APU) schemes, based on a 5 kW e net proton exchange membrane fuel cell (PEM-FC) stack, are evaluated and compared. The fuel processor section of each APU is characterized by a reformer (autothermal ATR or steam SR), a non-isothermal water gas shift (NI-WGS) reactor and a final syngas catalytic clean-up step: the CO preferential oxidation (PROX) reactor or the CO selective methanation (SMET) one. Furthermore, three hydrocarbon fuels, the most commonly found in service stations (gasoline, light diesel oil and natural gas) are considered as primary fuels. The comparison is carried out examining the results obtained by a series of steady-state system simulations in Aspen Plus® of the four different APU schemes by varying the fed fuel. From the calculated data, the performance of CO-PROX is not very different compared to that of the CO-SMET, but the performance of the SR based APUs is higher than the scheme of the ATR based APUs. The most promising APU scheme with respect to an overall performance target is the scheme fed with natural gas and characterized by a fuel processor chain consisting of SR, NI-WGS and CO-SMET reactors. This processing reactors scheme together with the fuel cell section, notwithstanding having practically the same energy efficiency of the scheme with SR, NI-WGS and CO-PROX reactors, ensures a less complex scheme, higher hydrogen concentration in the syngas, lower air mass rate consumption, the absence of nitrogen in the syngas and higher potential

Implementing Comprehensive Reform: Implications for Practice

Science.gov (United States)

Stout, Karen A.

2016-01-01

This chapter describes the challenges and practical barriers community colleges face when implementing comprehensive reform, exploring how reforms are leading to some improvements but not often scaled improvements.

Electricity reform in developing and transition countries: A reappraisal

International Nuclear Information System (INIS)

Williams, J.H.; Ghanadan, R.

2006-01-01

Since about 1990, many developing and transition countries have undertaken market-oriented reforms in their electric power sectors. Despite the widespread adoption of a standard policy model, reform processes and outcomes have often failed to meet expectations. Drawing on an extensive literature review and case studies in Asia, Africa, Latin America, and Eastern Europe, this paper describes common features of non-OECD electricity reform and reappraises reform policies and underlying assumptions. Comparison with the sector-focused policy goals of deregulation in OECD countries highlights the importance of national fiscal crises, macroeconomic reforms, and persuasion by multilateral lenders in shaping non-OECD reforms. It also makes clear reform's dependence on attracting foreign capital, and consequent vulnerability to volatile international financial conditions. Case studies of Bolivia, Ghana, India, Poland, and Thailand illustrate reform's diverse pathways and problems in different settings. A broad range of non-OECD reform experiences indicates that disappointing results have often resulted from a narrow focus on finance and cost recovery, inflexibly applied. The paper concludes that improving reform will require emphasizing a broader set of objectives, including service provision, public benefits, effective regulation, and social/political legitimacy. Above all, reforms must be based on realistic assessments of national needs and capabilities. (author)

A numerical analysis of heat and mass transfer during the steam reforming process of ethane

Science.gov (United States)

Tomiczek, Marcin; Kaczmarczyk, Robert; Mozdzierz, Marcin; Brus, Grzegorz

2017-11-01

This paper presents a numerical analysis of heat and mass transfer during the steam reforming of ethane. From a chemical point of view, the reforming process of heavy hydrocarbons, such as ethane, is complex. One of the main issue is a set of undesired chemical reactions that causes the deposition of solid carbon and consequently blocks the catalytic property of a reactor. In the literature a carbon deposition regime is selected by thermodynamical analysis to design safe operation conditions. In the case of Computational Fluid Dynamic (CFD, hereafter) models each control volume should be investigated to determinate if carbon deposition is thermodynamically favourable. In this paper the authors combine equilibrium and kinetics analysis to simulate the steam reforming of methane-ethane rich fuel. The results of the computations were juxtaposed with experimental data for methane steam reforming, and good agreement was found. An analysis based on the kinetics of reactions was conducted to predict the influence of temperature drop and non-equilibrium composition on solid carbon deposition. It was found that strong non-uniform temperature distribution in the reactor causes conditions favourable for carbon deposition at the inlet of the reformer. It was shown that equilibrium calculations, often used in the literature, are insufficient.

Reforming the Interagency at the Operational Level

National Research Council Canada - National Science Library

Halvorsen, Peter

2005-01-01

The informal and ad hoc construct of the interagency process at the operational, specifically regional, level of command is insufficient to meet the changed security environment of the post-Soviet world...

Determination of optimal reformer temperature in a reformed methanol fuel cell system using ANFIS models and numerical optimization methods

DEFF Research Database (Denmark)

Justesen, Kristian Kjær; Andreasen, Søren Juhl

2015-01-01

In this work a method for choosing the optimal reformer temperature for a reformed methanol fuel cell system is presented based on a case study of a H3 350 module produced by Serenergy A/S. The method is based on ANFIS models of the dependence of the reformer output gas composition on the reformer...... temperature and fuel flow, and the dependence of the fuel cell voltage on the fuel cell temperature, current and anode supply gas CO content. These models are combined to give a matrix of system efficiencies at different fuel cell currents and reformer temperatures. This matrix is then used to find...... the reformer temperature which gives the highest efficiency for each fuel cell current. The average of this optimal efficiency curve is 32.11% and the average efficiency achieved using the standard constant temperature is 30.64% an increase of 1.47 percentage points. The gain in efficiency is 4 percentage...

Review of Judicial Reforms in Bhutan

OpenAIRE

Dubgyur, Lungten

2004-01-01

This essay highlights the anomalies of judicial reforms in Bhutan. It presents a historical perspective of Bhutanese judicial reforms and addresses recent developments. It discusses court performance and experiences and approaches adopted in making the courts efficient. Much of the reform initiatives emanate from the throne. His Majesty the King has always advocated an efficient judicial system for the Kingdom. In obedience to the Royal Commands, the judicial system and judicial process in Bh...

Tariff-Tax Reforms and Market Access

DEFF Research Database (Denmark)

Kreickemeier, Udo; Raimondos-Møller, Pascalis

2006-01-01

Reducing tariffs and increasing consumption taxes is a standard IMF advice to countries that want to open up their economy without hurting government finances. Indeed, theoretical analysis of such a tariff-tax reform shows an unambiguous increase in welfare and government revenues. The present pa...... efficient proposal to follow both as far as it concerns market access and welfare.JEL code: F13, H20.Keywords: Market access; tariff reform, consumption tax reform....

Considerations for Education Reform in British Columbia

Science.gov (United States)

Santos, Ana

2012-01-01

Countries around the world refer to twenty-first century education as essential to maintaining personal and national economic advantage and draw on this discourse to advocate for and embark on educational reform. This paper examines issues around education reform, particularly in British Columbia. It argues that reformers should give careful…

Thermal and chemical analysis of carbon dioxide reforming of methane using the out-of-pile test facility

International Nuclear Information System (INIS)

Huang Ziyong; Ohashi, Hirofumi; Inagaki, Yoshiyuki

2000-03-01

In the Japan Atomic Energy Research Institute, a hydrogen production system is being designed to produce hydrogen by means of steam reforming of natural gas (its main composition is methane(CH 4 )) using nuclear heat (10 MW, 1178 K) supplied by the High Temperature Engineering Test Reactor (HTTR). Prior to coupling of the steam reforming system with the HTTR, an out-of-pile demonstration test was planned to confirm safety, controllability and performance of the steam reforming system under simulated operational conditions of the prototype. The out-of-pile test facility simulates key components downstream to an intermediate heat exchanger of the HTTR hydrogen production system on a scale of 1 : 30 and has a hydrogen production capacity of 110 Nm 3 /h using an electric heater as a reactor substitute. The test facility is presently under construction. Reforming of natural gas with carbon dioxide CO 2 (CO 2 reforming) using the out-of-pile test facility is also being considered. In recent years, catalytic reforming of natural gas with CO 2 to synthesis gas (CO and H 2 ) has been proposed as one of the most promising technologies for utilization of those two greenhouse gases. Numerical analysis on heat and mass balance has practical significance in CO 2 reforming when the steam reforming process is adopted in the out-of-pile test. Numerical analysis of CO 2 reforming and reforming of natural gas with CO 2 and steam (CO 2 +H 2 O reforming) have been carried out using the mathematical model. Results such as the methane conversion rate, product gas composition, and the components temperature distribution considering the effects of helium gas temperature, reforming pressure, molar ratio of process gases and so on have been obtained in the numerical analysis. Heat and mass balance of the out-of-pile test facility considering chemical reactions are evaluated well. The methane conversation rates are about 0.36 and 0.35 which correspond to the equilibrium at 1085 and 1100 K for

Thermal and chemical analysis of carbon dioxide reforming of methane using the out-of-pile test facility

Energy Technology Data Exchange (ETDEWEB)

Huang Ziyong [Institute of Nuclear Energy Technology, Tsinghua University (China); Ohashi, Hirofumi; Inagaki, Yoshiyuki [Department of Advanced Nuclear Heat Technology, Oarai Research Establishment, Japan Atomic Energy Research Institute, Oarai, Ibaraki (Japan)

2000-03-01

In the Japan Atomic Energy Research Institute, a hydrogen production system is being designed to produce hydrogen by means of steam reforming of natural gas (its main composition is methane(CH{sub 4})) using nuclear heat (10 MW, 1178 K) supplied by the High Temperature Engineering Test Reactor (HTTR). Prior to coupling of the steam reforming system with the HTTR, an out-of-pile demonstration test was planned to confirm safety, controllability and performance of the steam reforming system under simulated operational conditions of the prototype. The out-of-pile test facility simulates key components downstream to an intermediate heat exchanger of the HTTR hydrogen production system on a scale of 1 : 30 and has a hydrogen production capacity of 110 Nm{sup 3}/h using an electric heater as a reactor substitute. The test facility is presently under construction. Reforming of natural gas with carbon dioxide CO{sub 2} (CO{sub 2} reforming) using the out-of-pile test facility is also being considered. In recent years, catalytic reforming of natural gas with CO{sub 2} to synthesis gas (CO and H{sub 2}) has been proposed as one of the most promising technologies for utilization of those two greenhouse gases. Numerical analysis on heat and mass balance has practical significance in CO{sub 2} reforming when the steam reforming process is adopted in the out-of-pile test. Numerical analysis of CO{sub 2} reforming and reforming of natural gas with CO{sub 2} and steam (CO{sub 2}+H{sub 2}O reforming) have been carried out using the mathematical model. Results such as the methane conversion rate, product gas composition, and the components temperature distribution considering the effects of helium gas temperature, reforming pressure, molar ratio of process gases and so on have been obtained in the numerical analysis. Heat and mass balance of the out-of-pile test facility considering chemical reactions are evaluated well. The methane conversation rates are about 0.36 and 0.35 which

Two decades of reforms. Appraisal of the financial reforms in the Russian public healthcare sector.

Science.gov (United States)

Gordeev, Vladimir S; Pavlova, Milena; Groot, Wim

2011-10-01

This paper reviews the empirical evidence on the outcomes of the financial reforms in the Russian public healthcare sector. A systematic literature review identified 37 relevant publications that presented empirical evidence on changes in quality, equity, efficiency and sustainability in public healthcare provision due to the Russian public healthcare financial reforms. Evidence suggests that there are substantial inter-regional inequalities across income groups both in terms of financing and access to public healthcare services. There are large efficiency differences between regions, along with inter-regional variations in payment and reimbursement mechanisms. Informal and quasi-formal payments deteriorate access to public healthcare services and undermine the overall financing sustainability. The public healthcare sector is still underfinanced, although the implementation of health insurance gave some premises for future increases of efficiency. Overall, the available empirical data are not sufficient for an evidence-based evaluation of the reforms. More studies on the quality, equity, efficiency and sustainability impact of the reforms are needed. Future reforms should focus on the implementation of cost-efficiency and cost-control mechanisms; provide incentives for better allocation and distribution of resources; tackle problems in equity in access and financing; implement a system of quality controls; and stimulate healthy competition between insurance companies. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Effect of Short-Circuit Faults in the Back-to-Back Power Electronic Converter and Rotor Terminals on the Operational Behavior of the Doubly-Fed Induction Generator Wind Energy Conversion System

Directory of Open Access Journals (Sweden)

Dimitrios G. Giaourakis

2015-02-01

Full Text Available This paper deals with the operational behavior of the Doubly-Fed Induction Generator Wind Energy Conversion System under power electronic converter and rotor terminals faulty conditions. More specifically, the effect of the short-circuit fault both in one IGBT of the back-to-back power electronic converter and in rotor phases on the overall system behavior has been investigated via simulation using a system of 2 MW. Finally, the consequences of these faults have been evaluated.

Latin America: market mechanisms and supply adequacy in power sector reforms

Energy Technology Data Exchange (ETDEWEB)

Hammons, T.J. [University of Glasgow, Glasgow (United Kingdom); Barroso, L.A. [PSR, Rio de Janeiro (Brazil); Rudnick, H. [Pontificia Universidad Catolica de Chile, Santiago (Chile)

2011-03-15

The process of transformation in government and operations in the power sector leads to interaction between increasing integrated markets and public agencies in charge of policy making, regulation and control. This is examined for Latin America where state and marketing power sector planning, contract auctions to assure supply adequacy in an uncertain market environment, cross-border contracts, financing challenges for generation investments, and auctions of contracts to secure supply adequacy in the second stage of power sector reform are discussed. First, the state and market in power sector planning reform and state policies in Latin America are considered. Here, present concerns; the state-market relationship (the position of regulation, globalisation, internationalisation), and state market in the energy sector (correction and adjustments) are reviewed. Case studies for Argentina and Brazil are briefly outlined. The paper then examines contract auctions to assure supply adequacy in an uncertain energy environment that are being explored to face supply problems over recent years in the Chilean electricity market, taking into account the unexpected restrictions in natural gas transfers from Argentina. Also discussed are supply adequacy mechanisms and cross-border contracts in the Central American regional electricity market including firm transmission rights and financing challenges for generation investments. The final part of the paper discusses auctions of contracts and energy call options to ensure supply adequacy in the Brazilian power sector reform. Here, first stage of power sector reform, what went wrong, the second stage of reform and the move towards energy supply auctions, energy supply auctions so far and what's next in the challenges of environmental constraints and electricity-gas integration are reviewed. The reform being proposed to the electric regulatory framework for wholesale transactions in Peru is also reviewed. Considered are bids for

Investigation of bacterial diversity in the feces of cattle fed different diets.

Science.gov (United States)

Kim, M; Kim, J; Kuehn, L A; Bono, J L; Berry, E D; Kalchayanand, N; Freetly, H C; Benson, A K; Wells, J E

2014-02-01

The objective of this study is to investigate individual animal variation of bovine fecal microbiota including as affected by diets. Fecal samples were collected from 426 cattle fed 1 of 3 diets typically fed to feedlot cattle: 1) 143 steers fed finishing diet (83% dry-rolled corn, 13% corn silage, and 4% supplement), 2) 147 steers fed late growing diet (66% dry-rolled corn, 26% corn silage, and 8% supplement), and 3) 136 heifers fed early growing diet (70% corn silage and 30% alfalfa haylage). Bacterial 16S rRNA gene amplicons were determined from individual fecal samples using next-generation pyrosequencing technology. A total of 2,149,008 16S rRNA gene sequences from 333 cattle with at least 2,000 sequences were analyzed. Firmicutes and Bacteroidetes were dominant phyla in all fecal samples. At the genus level, Oscillibacter, Turicibacter, Roseburia, Fecalibacterium, Coprococcus, Clostridium, Prevotella, and Succinivibrio were represented by more than 1% of total sequences. However, numerous sequences could not be assigned to a known genus. Dominant unclassified groups were unclassified Ruminococcaceae and unclassified Lachnospiraceae that could be classified to a family but not to a genus. These dominant genera and unclassified groups differed (P < 0.001) with diets. A total of 176,692 operational taxonomic units (OTU) were identified in combination across all the 333 cattle. Only 2,359 OTU were shared across 3 diet groups. UniFrac analysis showed that bacterial communities in cattle feces were greatly affected by dietary differences. This study indicates that the community structure of fecal microbiota in cattle is greatly affected by diet, particularly between forage- and concentrate-based diets.

Circulating fluidized bed reformer-regenerator system for hydrogen production from methane. Paper no. IGEC-1-092

International Nuclear Information System (INIS)

Prasad, P.; Elnashaie, S.S.E.H.

2005-01-01

Steam reforming is presently the principal route for large-scale hydrogen production from natural gas. This paper proposes a novel concept of a reactor-regenerator type circulating fluidized bed (Prasad and Elnashaie, 2002) for efficient production of hydrogen. Carbon is optimally allowed to form on the catalyst in the reactor section through methane cracking and Boudouard coking reactions, and the deactivated catalyst is regenerated in the regenerator by burning off the carbon. This concept of carbon formation and burning cannot be used in a fixed bed configuration but is possible in the proposed novel Circulating Fluidized Bed (CFB) configuration, which employs a reactor-regenerator type of configuration. Allowing both carbon formation and steam reforming to occur simultaneously by introducing steam as part of the feed, gives more than 3 moles hydrogen per mole of methane at almost zero energy consumption. The steam can be fed as water at room temperature, and the hot catalyst returning from the regenerator can be used to vaporize it into steam. This route is the most efficient from both hydrogen yield and energy consumption points of view. This CFB configuration exhibits the bifurcation behavior and the present paper reports an investigation of its static bifurcation characteristics through a rigorous mathematical model. (author)

What triggers reforms in OECD countries? Improved reform measurement and evidence from the healthcare sector

NARCIS (Netherlands)

Wiese, Rasmus

The main contribution of this paper is the development of a novel and versatile methodology to identify economic reforms. The methodology is a combination of the Bai & Perron structural break filter, and validation of the structural breaks identified using de jure evidence of reforms. The procedure

Fed-batch coculture of Lactobacillus kefiranofaciens with Saccharomyces cerevisiae for effective production of kefiran.

Science.gov (United States)

Tada, Shiori; Katakura, Yoshio; Ninomiya, Kazuaki; Shioya, Suteaki

2007-06-01

In a batch coculture of kefiran-producing lactic acid bacteria Lactobacillus kefiranofaciens and lactate-assimilating yeast Saccharomyces cerevisiae, lactate accumulation in the medium was observed, which inhibited kefiran production. To enhance kefiran productivity by preventing lactate accumulation, we conducted lactose-feeding batch operation with feedforward/feedback control during the coculture, so that the lactate production rate of L. kefiranofaciens was balanced with the lactate consumption rate of S. cerevisiae. The lactate concentration was maintained at less than 6 g l(-1) throughout the fed-batch coculture using a 5 l jar fermentor, although the concentration reached 33 g l(-1) in the batch coculture. Kefiran production was increased to 6.3 g in 102 h in the fed-batch coculture, whereas 4.5 g kefiran was produced in 97 h in the batch coculture. The kefiran yield on lactose basis was increased up to 0.033 g g(-1) in the fed-batch coculture, whereas that in the batch coculture was 0.027 g g(-1).

Steam Reforming of Acetic Acid over Co-Supported Catalysts: Coupling Ketonization for Greater Stability

Energy Technology Data Exchange (ETDEWEB)

Davidson, Stephen D. [Energy and Environmental; Spies, Kurt A. [Energy and Environmental; Mei, Donghai [Energy and Environmental; Kovarik, Libor [Energy and Environmental; Kutnyakov, Igor [Energy and Environmental; Li, Xiaohong S. [Energy and Environmental; Lebarbier Dagle, Vanessa [Energy and Environmental; Albrecht, Karl O. [Energy and Environmental; Dagle, Robert A. [Energy and Environmental

2017-09-11

We report on the markedly improved stability of a novel 2-bed catalytic system, as compared to a conventional 1-bed steam reforming catalyst, for the production of H2 from acetic acid. The 2-bed catalytic system comprises of i) a basic oxide ketonization catalyst for the conversion of acetic acid to acetone, and a ii) Co-based steam reforming catalyst, both catalytic beds placed in sequence within the same unit operation. Steam reforming catalysts are particularly prone to catalytic deactivation when steam reforming acetic acid, used here as a model compound for the aqueous fraction of bio-oil. Catalysts comprising MgAl2O4, ZnO, CeO2, and activated carbon (AC) both with and without Co-addition were evaluated for conversion of acetic acid and acetone, its ketonization product, in the presence of steam. It was found that over the bare oxide support only ketonization activity was observed and coke deposition was minimal. With addition of Co to the oxide support steam reforming activity was facilitated and coke deposition was significantly increased. Acetone steam reforming over the same Co-supported catalysts demonstrated more stable performance and with less coke deposition than with acetic acid feedstock. DFT analysis suggests that over Co surface CHxCOO species are more favorably formed from acetic acid versus acetone. These CHxCOO species are strongly bound to the Co catalyst surface and could explain the higher propensity for coke formation from acetic acid. Based on these findings, in order to enhance stability of the steam reforming catalyst a dual-bed (2-bed) catalyst system was implemented. Comparing the 2-bed and 1-bed (Co-supported catalyst only) systems under otherwise identical reaction conditions the 2-bed demonstrated significantly improved stability and coke deposition was decreased by a factor of 4.

Thermal analysis of cylindrical natural-gas steam reformer for 5 kW PEMFC

Science.gov (United States)

Jo, Taehyun; Han, Junhee; Koo, Bonchan; Lee, Dohyung

2016-11-01

The thermal characteristics of a natural-gas based cylindrical steam reformer coupled with a combustor are investigated for the use with a 5 kW polymer electrolyte membrane fuel cell. A reactor unit equipped with nickel-based catalysts was designed to activate the steam reforming reaction without the inclusion of high-temperature shift and low-temperature shift processes. Reactor temperature distribution and its overall thermal efficiency depend on various inlet conditions such as the equivalence ratio, the steam to carbon ratio (SCR), and the fuel distribution ratio (FDR) into the reactor and the combustor components. These experiments attempted to analyze the reformer's thermal and chemical properties through quantitative evaluation of product composition and heat exchange between the combustor and the reactor. FDR is critical factor in determining the overall performance as unbalanced fuel injection into the reactor and the combustor deteriorates overall thermal efficiency. Local temperature distribution also influences greatly on the fuel conversion rate and thermal efficiency. For the experiments, the operation conditions were set as SCR was in range of 2.5-4.0 and FDR was in 0.4-0.7 along with equivalence ratio of 0.9-1.1; optimum results were observed for FDR of 0.63 and SCR of 3.0 in the cylindrical steam reformer.

Information report submitted by the Commission for European Affairs on the reform of the emission allowances market. Nr 4569

International Nuclear Information System (INIS)

Leroy, Arnaud

2017-01-01

This parliamentary report first proposes a presentation of the European carbon emission allowances market or emission trading scheme (ETS) by recalling the context of its creation, and by describing its operation (a trading platform to reduce CO_2 emission in Europe), and commenting critics which are generally made about this market. Then, the authors present and comment proposals of reform with notably the creation of a reserve fund of stability, and a structural reform of the market. The authors then explain why and how the ETS reform must go beyond that if the European Union wants to meet commitments defined in the Paris agreement

Liquid hydrogen production via hydrogen sulfide methane reformation

Science.gov (United States)

Huang, Cunping; T-Raissi, Ali

Hydrogen sulfide (H 2S) methane (CH 4) reformation (H 2SMR) (2H 2S + CH 4 = CS 2 + 4H 2) is a potentially viable process for the removal of H 2S from sour natural gas resources or other methane containing gases. Unlike steam methane reformation that generates carbon dioxide as a by-product, H 2SMR produces carbon disulfide (CS 2), a liquid under ambient temperature and pressure-a commodity chemical that is also a feedstock for the synthesis of sulfuric acid. Pinch point analyses for H 2SMR were conducted to determine the reaction conditions necessary for no carbon lay down to occur. Calculations showed that to prevent solid carbon formation, low inlet CH 4 to H 2S ratios are needed. In this paper, we analyze H 2SMR with either a cryogenic process or a membrane separation operation for production of either liquid or gaseous hydrogen. Of the three H 2SMR hydrogen production flowsheets analyzed, direct liquid hydrogen generation has higher first and second law efficiencies of exceeding 80% and 50%, respectively.

The Danish Police Reform

DEFF Research Database (Denmark)

Degnegaard, Rex; Mark, Sofie

2013-01-01

Many cases highlight the need for responsible management in regards to transparency of organisations and involvement of stakeholders in decisions that will impact citizens, patients, customers and/or clients. Often these cases take an outside-in approach as they illustrate why it is essential...... for organisations to work with transparency and involvement with the aim of upholding and further developing a social responsibility to their environment. This case on the other hand takes an inside-out perspective on social responsibility by illustrating how social responsibility is necessary for public......, the reform process was problematic and the following years were challenging and filled with changes and turbulence. Media, politicians and the police itself directed heavy criticism towards the effects of the reform and reviews of the reform as well as of the work of the police were carried out resulting...

A novel auto-thermal reforming membrane reactor for high purity H2

International Nuclear Information System (INIS)

Tony Boyd; Grace, J.R.; Lim, C.J.; Adris, A.M.

2006-01-01

A novel hydrogen reactor based on steam reforming of natural gas has been developed and tested. The reactor produces high purity hydrogen using in-situ perm-selective membranes installed in a fluidized catalyst bed, thus shifting the thermodynamic equilibrium of the SMR reaction and eliminating the need for downstream hydrogen purification. The reactor is particularly suited to auto-thermal reforming, where air is added to the reformer to provide the endothermic reaction heat, thus eliminating the need to indirectly heat the reactor. The gas flow pattern within the fluidized bed induces an internal circulation of catalyst particles between the central SMR reaction (permeation) zone and an outer annulus. The circulating hot catalyst particles from the oxidation zone carry the required endothermic heat of reaction for the reforming, while ensuring that the palladium membranes are not exposed to excessive temperatures or to oxygen. Another beneficial characteristic of the reactor is that very little of the nitrogen present in the oxidation air reaches the reaction zone, thus maintaining the hydrogen driving force for the perm-selective membranes. Pilot plant results carried out in a semi-industrial scale reactor will be presented. The reactor was operated up to 650 C and 14 bar. Pure hydrogen (99.999+%) was initially obtained from the reactor and an equilibrium shift was demonstrated. (authors)

Simulation study of a proton exchange membrane (PEM) fuel cell system with autothermal reforming

Energy Technology Data Exchange (ETDEWEB)

Ersoz, Atilla [TUBITAK Marmara Research Centre, Energy Systems and Environmental Research Institute, 41470 Gebze, Kocaeli (Turkey); Olgun, Hayati [TUBITAK Marmara Research Centre, Energy Systems and Environmental Research Institute, 41470 Gebze, Kocaeli (Turkey); Ozdogan, Sibel [Marmara University, Faculty of Engineering, Department of Mechanical Engineering, 81040 Goztepe, Istanbul (Turkey)

2006-08-15

This paper presents the results of a study for a 100 kW net electrical power PEM fuel cell system. The major system components are an autothermal reformer, high and low temperature shift reactors, a preferential oxidation reactor, a PEM fuel cell, a combustor and an expander. Intensive heat integration within the PEM fuel cell system has been necessary to achieve acceptable net electrical efficiency levels. The calculations comprise the auxiliary equipment such as pumps, compressors, heaters, coolers, heat exchangers and pipes. The process simulation package 'ASPEN-HYSYS 3.1' has been used along with conventional calculations. The operation conditions of the autothermal reformer have been studied in detail to determine the values, which lead to the production of a hydrogen rich gas mixture with CO concentration at ppm level. The operation parameters of the other reactors have been determined considering the limitations implied by the catalysts involved. A gasoline type hydrocarbon fuel has been studied as the source for hydrogen production. The chemical composition of the hydrocarbon fuel affects the favorable operation conditions of autothermal reforming and the following fuel purification steps. Thermal efficiencies have been calculated for all of the major system components for selected operation conditions. The fuel cell stack efficiency has been calculated as a function of the number of cells (500-1250 cells). Efficiencies of all of the major system components along with auxiliary unit efficiencies determine the net electrical efficiency of the PEM fuel cell system. The obtained net electrical efficiency levels are between 30 (500 cells) and 37% (1250 cells). Hence, they are comparable with or higher than those of the conventional gasoline based internal combustion engine systems, in terms of the mechanical power efficiency.

Simulation study of a proton exchange membrane (PEM) fuel cell system with autothermal reforming

International Nuclear Information System (INIS)

Ersoz, Atilla; Olgun, Hayati; Ozdogan, Sibel

2006-01-01

This paper presents the results of a study for a 100 kW net electrical power PEM fuel cell system. The major system components are an autothermal reformer, high and low temperature shift reactors, a preferential oxidation reactor, a PEM fuel cell, a combustor and an expander. Intensive heat integration within the PEM fuel cell system has been necessary to achieve acceptable net electrical efficiency levels. The calculations comprise the auxiliary equipment such as pumps, compressors, heaters, coolers, heat exchangers and pipes. The process simulation package 'ASPEN-HYSYS 3.1' has been used along with conventional calculations. The operation conditions of the autothermal reformer have been studied in detail to determine the values, which lead to the production of a hydrogen rich gas mixture with CO concentration at ppm level. The operation parameters of the other reactors have been determined considering the limitations implied by the catalysts involved. A gasoline type hydrocarbon fuel has been studied as the source for hydrogen production. The chemical composition of the hydrocarbon fuel affects the favorable operation conditions of autothermal reforming and the following fuel purification steps. Thermal efficiencies have been calculated for all of the major system components for selected operation conditions. The fuel cell stack efficiency has been calculated as a function of the number of cells (500-1250 cells). Efficiencies of all of the major system components along with auxiliary unit efficiencies determine the net electrical efficiency of the PEM fuel cell system. The obtained net electrical efficiency levels are between 30 (500 cells) and 37% (1250 cells). Hence, they are comparable with or higher than those of the conventional gasoline based internal combustion engine systems, in terms of the mechanical power efficiency

Working towards Justice, Security Sector Reform and Better ...

International Development Research Centre (IDRC) Digital Library (Canada)

... on security sector reform, constitutional reform, governance of diversity and critical dialogues in MENA societies. ... Reform will take time and one of the tests for those involved in this process is exercising patience and .... Related articles ...

TAX REFORM AND NONCOMPLIANCE IN INDONESIA

Directory of Open Access Journals (Sweden)

Heru Iswahyudi

2017-05-01

Full Text Available The purpose of this paper is to examine the impact of Indonesia’s tax reforms of 2000 and 2008/2009 on taxpayers’ noncompliance. Noncompliance is defined as the difference between the Value Added Tax (VAT liability and the actual revenue. Data are mainly collected from the World Input-Output Database and Indonesia’s Central Board of Statistics. The methodology uses one of the ‘top-down’ approaches, in which national accounts figures are employed to arrive at an estimation of the VAT liability. It is found that compliance deteriorated when reform efforts were incomplete – that is when the reforms suffered from decelerations, setbacks or reversals. This paper contributes to the literature by providing a framework for analyzing the impact of tax reform on taxpayer’s compliance behavior.

LAND REFORM IN UKRAINE: HISTORIOGRAPHICAL ANALYSIS

Directory of Open Access Journals (Sweden)

Barantsov B.

2016-05-01

Full Text Available Modern land reform, that continues in Ukraine since the beginning of the 90-th of ХХ century, is a logical result of the functioning of society and the state.. It’s prerequisites becames, especially full monopolization of state on ownership of land; absence of payment for land as one of the means of ensuring the rational use of lands; absence on workers motivation for intensive work on the land, etc.. These and other preconditions contributed to soil degradation, production of agricultural products with exceeding of maximum allowable concentrations of pollutants, development of diseases, undermine the gene pool of nature and man. Mentioned reasons determined the goal and objectives of modern land reform, which were originally set out in the preamble to the Resolution of the Verkhovna Rada of Ukraine from December 18, 1990 «On Land Reform» with following changes and additions, and in the implementation of the land-reformation measures gained more complete content. Conducted analysis shows that land reform in Ukraine leads to a change of ownership of land, contributes to solving problems of citizens by land plots, enactment of payment for land usecreation of conditions for the development of land market. Thus changing land relations, is formed legal and regulatory framework of land reform and land market. However, positive developments in the implementation of land reform to end of the 90-th years have not led to a radical and effective upgrade of agricultural production, recovery of investment processes in other branches of industry, improving of welfare of the population. Land reform measures didn’t receive adequate financial support. The ultimate goal - an economically-effective and environmentally safe use of land in Ukraine - has not been achieved. Further reforming of land relations contributed to the adoption in October 2001 of the Land Code of Ukraine in the new edition that created the legal principles of land reform. Since it�

Participatory management reforms in irrigation sector of sindh

International Nuclear Information System (INIS)

Lashari, B.K.

2009-01-01

Pakistan has been making efforts to restructuring the century old irrigation system by involving beneficiaries (water users) at various units of the irrigation system management. The main purposes of reforms are to improve O and M (Operation and Maintenance) of irrigation system, to make balance in expenditure and revenue, to improve crop production through efficient use of water, to maintain affordable drainage system and to adopt PWRM (Participatory Water Resource Management) approach. In these reforms, the Sindh provincial irrigation department was transferred to an autonomous body as SmA (Sindh Irrigation and Drainage Authority). Under SmA, CAWB (Canal Area Water Board) at each canal command area, water users association at watercourse level and Farmer Organizations at each secondary canal (Distributary/ Minor) command area were being formed. So far 335 FOs (Farmers Organizations) have been formed in Sindh. To evaluate the performance of FOs in their day to day activities such as water distribution, O and M of irrigation channels, conflict management and revenue (Abiana) collection, IMI (Institutional Maturity Index) of FOs is conducted. The objective IMI analysis was to assess the maturity of FOs in terms of organizational aspects, conflict resolution, financial aspects, water distribution, operation and maintenance, environmental aspects and capacity building of FOs. The IMI analyses identified the weaker aspects of the FOs and need of focus these aspects for improved performance of FOs through effective social mobilization and capacity building activities. (author)

European electricity markets reforms: the 'visible hand' of public coordination

International Nuclear Information System (INIS)

Finon, Dominique; Roques, Fabien

2013-01-01

The paper investigates how proposed reforms on policies to maintain generation adequacy and encourage clean technology investments in a number of European countries modify the role of the market. In these reforms the government, regulator and system operator take on explicit planning and coordination responsibilities with the introduction of capacity mechanisms and long-term support for clean technologies. We highlight the interactions of these mechanisms with the electricity market and how they reallocate risks between generators, government and consumers. The different mechanisms offer varying degrees of autonomy to generators with regards to investment decisions. In a prospective way, the paper also explores how designs of these different mechanisms might converge towards a unified technology neutral mechanism in the long-run. This could involve auctioning of long-term contracts for all types of existing and new capacities, whether it is low carbon or fossil fueled. (authors)

Legal Reform, De-colonization and State-building in Palestine ...

International Development Research Centre (IDRC) Digital Library (Canada)

Legal Reform, De-colonization and State-building in Palestine. Demands for legal reform have come from both inside and outside Palestine. Inside Palestine, legal reform is seen as a prerequisite for democracy and good governance. Outside, legal reform is perceived as integral to the continued peace process with Israel.

Education Reform: Ten Years after the Massachusetts Education Reform Act of 1993

Directory of Open Access Journals (Sweden)

Linda Driscoll, Joseph B. Berger, Ronald K. Hambleton, Lisa A. Keller, Robert W. Maloy, David Hart, Paul Oh, Victoria Getis, Susan Bowles, Francis L. Gougeon, Kathryn A. McDermott, Andrew Churchill

2005-02-01

Full Text Available In June 1993, Governor William Weld signed into law the Massachusetts Education Reform Act (MERA. MERA greatly increased the state role both in funding public education and in guiding the local educational process. The state’s role changed to incorporate setting curriculum frameworks and holding schools accountable for student performance. Because MERA was designed to be a systemic reform of education, all of the various state activities and policies needed to fit together into a coherent whole based on state educational standards.

General Theory of the Double Fed Synchronous Machine. Ph.D. Thesis - Swiss Technological Univ., 1950

Science.gov (United States)

El-Magrabi, M. G.

1982-01-01

Motor and generator operation of a double-fed synchronous machine were studied and physically and mathematically treated. Experiments with different connections, voltages, etc. were carried out. It was concluded that a certain degree of asymmetry is necessary for the best utilization of the machine.

Project overview of OPTIMOS-EVE: the fibre-fed multi-object spectrograph for the E-ELT

NARCIS (Netherlands)

Navarro, R.; Chemla, F.; Bonifacio, P.; Flores, H.; Guinouard, I.; Huet, J.-M.; Puech, M.; Royer, F.; Pragt, J.H.; Wulterkens, G.; Sawyer, E.C.; Caldwell, M.E.; Tosh, I.A.J.; Whalley, M.S.; Woodhouse, G.F.W.; Spanò, P.; Di Marcantonio, P.; Andersen, M.I.; Dalton, G.B.; Kaper, L.; Hammer, F.

2010-01-01

OPTIMOS-EVE (OPTical Infrared Multi Object Spectrograph - Extreme Visual Explorer) is the fibre fed multi object spectrograph proposed for the European Extremely Large Telescope (E-ELT), planned to be operational in 2018 at Cerro Armazones (Chile). It is designed to provide a spectral resolution of

Railway Reform in China.

OpenAIRE

Wu, J. H.; Nash, C.

1998-01-01

The purpose of this working paper is to consider the current situation of Chinese Railways, the progress of reforms to date, and possible future developments. The first section describes the current problems of Chinese Railways, as a vast organisation subject to strong central control, facing enormous and rapidly growing demands which it is unable to satisfy. The progress of reform in Chinese Railways to date, and in particular the Economic Contract Responsibility System instituted in the lat...

on the accra document, reformed theology and reformed ecclesiology

African Journals Online (AJOL)

2009-12-14

Dec 14, 2009 ... Many churches and ecumenical bodies have already responded, in diverse ways ..... and contains a number of practical commitments and appeals. (par. ..... rhetorical power and emotion that it seemingly has for Reformed.

THE CONSTITUTIONAL CONCEPTS OF THE REFORM TREATY (THE LISBON TREATY

Directory of Open Access Journals (Sweden)

Emilian Ciongaru

2017-12-01

Full Text Available The Lisbon Treaty also known as the Reform Treaty provides only an amendment of the treaties considered as fundamental, namely the Treaty on the European Union and the Treaty on the functioning of the European Union and is the result of the constitutional process triggered by the Laeken Declaration adopted by the European Council. The Lisbon Treaty is still built on the content of the European Constitution from which they eliminated the most controversial provisions, first of all the title of Constitution that might produce concern and panic among the European Union population through the symbolic power it contained, and for Romania this new treaty was the first it signed in quality of a Union member state. Even if does not bear the name of European Constitution, the Lisbon Treaty is a European Constitution for the following reasons: first it is a Constitution because it gathers together most of the fundamental elements of the Constitutional Treaty, even if it does not have the structure or the name thereof, and second the treaties after the Lisbon reform have become small constitutions from the operational viewpoint, they develop the functions of a constitution, limit power and organize the operation of the organization.

[A health system's neoliberal reform: evidence from the Mexican case].

Science.gov (United States)

López-Arellano, Oliva; Jarillo-Soto, Edgar C

2017-07-27

This study addressed the shaping of Mexico's health system in recent years, with an analysis of the social determination conditioning the system's current formulation, the consequences for the population's living and working conditions, and the technical and legal reform measures that shaped the system's transformation. The article then analyzes the survival of social security institutions and the introduction of an individual insurance model and its current implications and consequences. From the perspective of the right to health, the article compares the measures, resources, and interventions in both health care models and highlights the relevance of the social security system for Popular Insurance. The article concludes that the measures implemented to reform the Mexican health system have failed to achieve the intended results; on the contrary, they have led to a reduction in interventions, rising costs, and a decrease in the installed capacity and professional personnel for the system's operation, thus falling far short of solving the problem, rather aggravating the inequities without solving the system's structural contradictions. Health systems face new challenges, inevitably requiring that the analyses be situated in a broader framework rather than merely focusing on the functional, administrative, and financial operation of the systems in the respective countries.

Thermal and chemical analysis on steam reforming in an out-of-pile test facility (Contract research)

Energy Technology Data Exchange (ETDEWEB)

Haga, Katsuhiro [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Suyama, Kazumasa; Inagaki, Yoshiyuki; Hayashi, Kohji; Ogawa, Masuro

1999-08-01

An out-of-pile test facility of a hydrogen production system whose scale is 1/30th of the HTTR hydrogen production system is presently under construction at the Oarai Establishment of the Japan Atomic Energy Research Institute. In this system, a steam generator works as a thermal buffer for mitigating the heat consumption fluctuation in a steam reformer so as not to affect an operation of the reactor system. To control the thermal buffer system properly, it is important to evaluate the effect of the steam reforming parameters on the heat fluctuation in advance. So, using the mass and thermal balance analysis code developed for a simulation of the out-of-pile test facility, the heat consumption fluctuation in the steam reformer was analyzed by various changes of the process gas flow rate, the process gas inlet temperature, the process gas composition etc. From the analytical results, it was found that the heat transfer augmentation of the reformer tube by using repeated fins was effective in increasing the hydrogen production rate of up to 12.5%. Also, the fluctuation of the process gas flow rate tended to greatly affect the heat consumption rate for the steam reforming reaction, so that the helium gas temperature increased from 586degC to 718degC. (author)

Parallel steady state studies on a milliliter scale accelerate fed-batch bioprocess design for recombinant protein production with Escherichia coli.

Science.gov (United States)

Schmideder, Andreas; Cremer, Johannes H; Weuster-Botz, Dirk

2016-11-01

In general, fed-batch processes are applied for recombinant protein production with Escherichia coli (E. coli). However, state of the art methods for identifying suitable reaction conditions suffer from severe drawbacks, i.e. direct transfer of process information from parallel batch studies is often defective and sequential fed-batch studies are time-consuming and cost-intensive. In this study, continuously operated stirred-tank reactors on a milliliter scale were applied to identify suitable reaction conditions for fed-batch processes. Isopropyl β-d-1-thiogalactopyranoside (IPTG) induction strategies were varied in parallel-operated stirred-tank bioreactors to study the effects on the continuous production of the recombinant protein photoactivatable mCherry (PAmCherry) with E. coli. Best-performing induction strategies were transferred from the continuous processes on a milliliter scale to liter scale fed-batch processes. Inducing recombinant protein expression by dynamically increasing the IPTG concentration to 100 µM led to an increase in the product concentration of 21% (8.4 g L -1 ) compared to an implemented high-performance production process with the most frequently applied induction strategy by a single addition of 1000 µM IPGT. Thus, identifying feasible reaction conditions for fed-batch processes in parallel continuous studies on a milliliter scale was shown to be a powerful, novel method to accelerate bioprocess design in a cost-reducing manner. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1426-1435, 2016. © 2016 American Institute of Chemical Engineers.

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... Program Federal Legislation Federal Legislation Federal Legislation Health Care Reform Summary Letters on Health Care Reform Medicare Physician Payment Medical Liability Reform Opioids ...

Curriculum reform at Chinese medical schools: what have we learned?

Science.gov (United States)

Huang, Lei; Cheng, Liming; Cai, Qiaoling; Kosik, Russell Olive; Huang, Yun; Zhao, Xudong; Xu, Guo-Tong; Su, Tung-Ping; Chiu, Allen Wen-Hsiang; Fan, Angela Pei-Chen

2014-12-01

Curriculum reform at Chinese medical schools has attracted a lot of attention recently. Several leading medical schools in China have undergone exploratory reforms and in so doing, have accumulated significant experience and have made considerable progress. An analysis of the reforms conducted by 38 Chinese medical colleges that were targeted by the government for upgrade was performed. Drawing from both domestic and international literature, we designed a questionnaire to determine what types of curricular reforms have occurred at these institutions and how they were implemented. Major questions touched upon the purpose of the reforms, curricular patterns, improvements in teaching methods post-reform, changes made to evaluation systems post-reform, intra-university reform assessment, and what difficulties the schools faced when instituting the reforms. Besides the questionnaire, relevant administrators from each medical school were also interviewed to obtain more qualitative data. Out of the 38 included universities, twenty-five have undergone major curricular reforms. Among them, 60.0% adopted an organ system-based curriculum model, 32.0% adopted a problem-based curriculum model, and 8.0% adopted a hybrid curriculum model. About 60.0% of the schools' reforms involved both the "pre-clinical" and the "clinical" curricula, 32.0% of the schools' reforms were limited to the "pre-clinical" curricula, and 8.0% of the schools' reforms only involved the "clinical" curricula. Following curricular reform, 60.0% of medical schools experienced an overall reduction in teaching hours, 76.0% reported an increase in their students' clinical skills, and 60.0% reported an increase in their students' research skills. Medical curricular reform is still in its infancy in China. The republic's leading medical schools have engaged in various approaches to bring innovative teaching methods to their respective institutions. However, due to limited resources and the shackle of traditional

Adaptability of competitive electricity reforms a modular analysis

International Nuclear Information System (INIS)

Dubois, Ute

2009-01-01

Among the competitive electricity reforms that have been implemented in Europe and the US for the last 18 years, none has 'survived' over several years without major changes. Their changing nature raises the question of their adaptability. Two characteristics of reforms play a key role on their adaptation properties. Firstly, they are 'modular' objects in the sense of [Baldwin, C., 2008. Where do transactions come from? Modularity, transactions, and the boundaries of firms. Industrial and Corporate Change 17 (1), 155-195]. Secondly, they are produced in an institutional process which leads to 'incomplete' rules and designs [Pistor, K., Xu, C., 2003. Incomplete law. International Law and Politics 35, 931-1013]. We propose a typology of adaptations based on the framework proposed by [Williamson, O.E., 1991. Comparative economic organization: the analysis of discrete structural alternatives. Administrative Science Quarterly 36 (2), 269-296] for contracts: (1) in case of small disturbances, adaptations are realized quasi-automatically, by autonomous decisions of the institutions governing the implementation of reforms; (2) in case of middle-range disturbances, adaption is made by Coasian bargaining; (3) finally, in case of strong disturbances, or when bargaining is not feasible, the adaptation of reforms is in the hands of legislative and executive institutions [North, D.C., 2005. Le processus du developpement economique. Editions d'Organisation]. These institutions can reform the reforms [Joskow, P.L., 2006. Introduction to electricity sector liberalization: lessons learned from cross-country studies. In: Sioshansi, F.P. (Ed.), Electricity Market Reform: An International Perspective. Elsevier, Amsterdam, pp. 1-32; Hogan, W.W., 2002. Electricity market restructuring: reforms of reforms. Journal of Regulatory Economics 21, 103-132]. The role of these types of adaptations in each electricity reform is a consequence of the allocation of rights to the regulator, to

Reforming Science and Mathematics Education

Science.gov (United States)

Lagowski, J. J.

1995-09-01

fundamental reforms in public education is challenging. The coalition must be able to reach consensus on a vision of reform and, then, sustain the reform over an extended period of time. This is not easy when power and authority are highly fragmented (and perhaps at odds), where interest groups live or die on confromtation politics, when public and private sectors exhibit a basic distrust of one another, and when everyone is an expert--real or imagined--on topics more-or-less related to education. In addition, the SSI's are operating in a turbulent climate. Policy makers may be working on standards-based reforms in K-12 education at the same time they are seeking efficiencies in state government, consider deregulation, and experiment with integrated social services. Criminal justice, health, and welfare are competing in state capitols for the resources required to bring about education reforms. And, within this shifting policy landscape, the SSI's are seeking higher priority for mathematics and science, as well as attempting to develop the infrastructure and capacity to support change in the schools. Simply keeping mathematics and science education high on the agenda of state policy-makers is a challenge. Each of these component strategies of the SSI's is important. The critical question is whether, in a given state, the SSI strategies, when combined with other state reform initiatives, form a coherent, comprehensive plan for improving public education. While the oldest of the SSI's are only in their fourth year of activity, it is already clear that the reforms they are seeking will take longer than five years to accomplish. (The SSI's are supported by five-year grants from the NSF.) The instructional reforms advocated by the SSI's require time to implement, and once in place, additional time to produce results. Elected officials often focus on the short-term, and they can become impatient when the results are slow. There appears to be no ready solution to the conflict

Reforming Higher Education in "Transition": Between National and International Reform Initiatives--The Case of Slovenia

Science.gov (United States)

Zgaga, Pavel; Miklavic, Klemen

2011-01-01

The article analyzes the last two decades of higher education reforms in Slovenia. During the "period of transition," they were led by national as well as international initiatives. At an early stage, the national initiatives were mainly based on criticisms of the last reform made by the former regime, although the generation of new…

Control of variable speed wind turbine with doubly-fed induction generator

Energy Technology Data Exchange (ETDEWEB)

Hansen, A.D.; Soerensen, P. [Risoe National Lab., Wind Energy Dept., Roskilde (Denmark); Iov, F.; Blaabjerg, F. [Aalborg Univ., Inst. of Energy Technology, Aalborg (Denmark)

2004-07-01

draIn this paper, a Control method suitable for a variable speed grid connected pitch-controlled wind turbine with doubly-fed induction generator (DFIG) is developed. The targets of the Control system are: 1) to Control the power drawn from the wind turbine in order to track the wind turbine optimum operation point 2) to limit the power in case of high wind speeds and 3) to Control the reactive power interchanged between the wind turbine generator and the grid. The considered configuration of DFIG is an induction generator with a wound rotor connected to the grid through a back-to-back power converter and a stator directly connected to the grid. The paper presents the overall Control system of the variable speed DFIG wind turbine, with focus on the Control strategies and algorithms applied at each hierarchical Control level of the wind turbine. There are two Control levels: a DFIG Control level and wind turbine Control level. The DFIG Control level contains a fast Control of the power converter and of the doubly-fed induction generator and it has as goal to Control the active and reactive power of the wind turbine independently. The wind turbine Control level supervises with Control signals both the DFIG Control level and the hydraulic pitch Control system of the wind turbine. The present Control method is designed for normal continuous operations. The variable speed/variable pitch wind turbine with doubly-fed induction generator is implemented in the dynamic power system simulation tool DIgSILENT, which makes possible to investigate the dynamic performance of gid-connected wind turbines as a part of realistic electrical grid models. Several significant simulation results are performed With the overall Control-implemented algorithm applied on a variable speed, variable pitch wind turbine model. (au)

Electricity reform abroad and US investment

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-10-01

This report reviews and analyzes the recent electricity reforms in Argentina, Australia, and the United Kingdom (UK) to illustrate how different models of privatization and reform have worked in practice. This report also analyzes the motivations of the U.S. companies who have invested in the electricity industries in these countries, which have become the largest targets of U.S. foreign investment in electricity. Two calculations of foreign investment are used. One is the foreign direct investment series produced by the U.S. Department of Commerce. The other is based on transactions in electric utilities of the three countries. The electricity reform and privatization experiences reviewed may offer some insight as to how the U.S. electricity industry might develop as a result of recent domestic reform efforts and deregulation at the state and national levels. 126 refs., 23 figs., 27 tabs.

SOFC Operation with Real Biogas

DEFF Research Database (Denmark)

Hagen, Anke; Winiwarter, Anna; Langnickel, Hendrik

2017-01-01

Biogas is a valuable energy source and will be available in future in systems relying on renewables. It is an attractive fuel for solid oxide fuel cells (SOFC), which are able to utilize the carbon contained in the biogas and which produce electricity with high efficiency. In the current paper......, state‐of‐the‐art SOFCs were studied regarding performance and durability in relation to biogas as fuel and considering important contaminants, specifically sulfur. First, the catalytic behavior in relevant synthetic biogas mixtures was studied and the potential of dry reforming was demonstrated....... Successful long term operation of an SOFC under both, conditions of steam and dry reforming, i.e., addition of steam or CO2 to avoid carbon formation was shown. For the steam reforming case a remarkable period of 3,500 h, hereof 3,000 h in the presence of H2S was achieved. Finally, a real biogas from...

Energy reforms in central and eastern Europe - The first year

International Nuclear Information System (INIS)

1991-01-01

The first stages of the energy reforms in central and eastern Europe - taking stock of the heritage of the past and conceptualizing the nature of reforms - were accomplished in 1990. While two countries - the USSR and Albania -introduced some market economy elements into central energy planning and basically maintained the latter, all other countries of central and eastern Europe opted for a replacement of central energy planning by market-oriented energy policies and practices. In those latter countries, a typical policy of market adaptation emerged consisting of a change of policies, institutions, economic instruments and relations. Differences in the conditions prevailing in the various countries resulted in the emergence of specific national ''models'' of market adaptation. The reforms, if successful, would imply: greater energy efficiency, reduced pollution, enhanced nuclear safety, a reduced impact on the climate, greater business opportunities, the closure of uneconomic capacities, a decline of coal production, a rise in unemployment; a rise of the energy trade dependence coupled with a rise of gas and oil imports; but practically no change of the net energy exports of the USSR. By the end of 1990 developed market economies agreed to co-ordinate assistance (within the ''Group of 24'') and determined the type and modalities of support. This support would enable and encourage the economies in transition to finalize reform, stimulate their practical implementation and address side effects (disinvestments, unemployment) and systematic risks (e.g. trade dependence) and opportunities (e.g. trade diversification). The business community and lending institutions would have to assess and support investments opportunities more actively. Intergovernmental organizations will play an important role in improving the conditions for business involvement. In 1990, the frameworks for energy reforms in central and eastern Europe, short term assistance, long term business

PRODUCTION OF HYDROGEN FROM THE STEAM AND OXIDATIVE REFORMING OF LPG: THERMODYNAMIC AND EXPERIMENTAL STUDY

Directory of Open Access Journals (Sweden)

P. P. Silva

2015-09-01

Full Text Available AbstractThe objective of this paper was to use a thermodynamic analysis to find operational conditions that favor the production of hydrogen from steam and oxidative reforming of liquefied petroleum gas (LPG. We also analyzed the performance of a catalyst precursor, LaNiO3, in order to compare the performance of the obtained catalyst with the thermodynamic equilibrium predictions. The results showed that it is possible to produce high concentrations of hydrogen from LPG reforming. The gradual increase of temperature and the use of high water concentrations decrease the production of coke and increase the formation of H2. The reaction of oxidative reforming of LPG was more suitable for the production of hydrogen and lower coke formation. Furthermore the use of an excess of water (H2O/LPG =7.0 and intermediate temperatures (973 K are the most suitable conditions for the process.

Ethical and Human Rights Foundations of Health Policy: Lessons from Comprehensive Reform in Mexico.

Science.gov (United States)

Frenk, Julio; Gómez-Dantés, Octavio

2015-12-10

This paper discusses the use of an explicit ethical and human rights framework to guide a reform intended to provide universal and comprehensive social protection in health for all Mexicans, independently of their socio-economic status or labor market condition. This reform was designed, implemented, and evaluated by making use of what Michael Reich has identified as the three pillars of public policy: technical, political, and ethical. The use of evidence and political strategies in the design and negotiation of the Mexican health reform is briefly discussed in the first part of this paper. The second part examines the ethical component of the reform, including the guiding concept and values, as well as the specific entitlements that gave operational meaning to the right to health care that was enshrined in Mexico's 1983 Constitution. The impact of this rights-based health reform, measured through an external evaluation, is discussed in the final section. The main message of this paper is that a clear ethical framework, combined with technical excellence and political skill, can deliver major policy results. Copyright © 2015 Frenk and Gómez-Dantés. This is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/3.0/), which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original author and source are credited.

New Reforms to the Health System

OpenAIRE

Tran Dai, Candice; Duchâtel, Mathieu

2012-01-01

Based on:– Li Ling, “Successful reform of the health system hangs on two key elements,” Zhongguo jingyingbao (China Management News), 18 April 2009.– Li Hongmei, Li Xiaohong, Wang Junping, “Ten experts comment on the new reform of the health system: Providing better and cheaper access to medical care,” Renmin ribao (People’s Daily), 15 April 2009.– Yao Qi, “The new reform of the health system must first and foremost compensate for the shortcomings in the local hospitals,” Yangcheng wanbao (Ya...

Concertina Reforms with International Capital Mobility

DEFF Research Database (Denmark)

Kreickemeier, Udo; Raimondos-Møller, Pascalis

2006-01-01

We show that the standard concertina result for tariff reforms -i.e. loweringthe highest tariff increases welfare - no longer holds in general if we allow for international capital mobility. The result can break down if the good whose tariff is lowered is not capital intensive. If the concertina...... reform lowers welfare it lowers market access as well, thereby compromising a second goal that is typically connected with trade liberalisation.JEL-Classification: F11, F13, F15Key words: Trade Policy Reform, International Factor Mobility, Welfare, MarketAccess...

TAX-REFORM - DREAMING ABOUT TOUGH REALITIES

NARCIS (Netherlands)

DEKAM, F

1992-01-01

This paper discusses four papers concerned with tax reform. It is concluded that tax reform has had a rather limited impact on behaviour so far but that governments should press ahead with gradual improvement and not expect dramatic results.

Direct Flux Control for Stand-Alone Operation Brushless Doubly Fed Induction Generators Using a Resonant-Based Sliding-Mode Control Approach

Directory of Open Access Journals (Sweden)

Kai Ji

2018-04-01

Full Text Available In this paper, a novel voltage control strategy for stand-alone operation brushless doubly fed induction generators for variable speed constant frequency wind energy conversion systems was presented and discussed. Based on the model of the power generation system, the proposed direct flux control strategy employs a nonlinear reduced-order generalized integrator-based resonant sliding-mode control approach to directly calculate and regulate the output value of converter which the control winding stator requires so as to eliminate its instantaneous errors, without involving any synchronous rotating coordinate transformations. The stability, robustness and convergence capability of the proposed control strategy were described and analyzed. Owing to the fact no additional current control inner loops are involved, the system configuration is therefore simplified and the dynamic performance enhanced. A constant converter switching frequency was achieved by using space vector pulse width modulation, which reduces the harmonics of the generator terminal voltage. In addition, the feasibility and validity of the proposed scheme is verified by experiments, and excellent steady and transient performance is achieved.

Feasibility of a superconducting FED with 50 cm of magnet shielding

International Nuclear Information System (INIS)

Schultz, J.H.; Montgomery, D.B.

1981-01-01

The feasibility of the suggestion that the cost of a Fusion Energy Device (FED) could be substantially reduced by operating with a reduced duty factor and only 50 cm of magnet shielding is evaluated here. This report examines the effect of light shielding on insulation life, matrix- and superconductor properties, refrigerator cost and steady-state heat removal. With very careful design, it appears feasible to build a device with only 50 cm of shielding

Competitive effects and instruments of power sector reforms. International reform concepts blockade structures, risk distribution. A political economy analysis

International Nuclear Information System (INIS)

Liebchen, Armin

2014-01-01

Power sectors with weak or inadequate competition structures are the rule, despite numerous attempts at reform. But can afford modern economies this defect for a long time? Why can the implementation of competition are blocked so effectively? The author studied international reform experiences and opens up interesting insights that can also reflect on problems of the German energy turnaround: The difficulty of timing and coordination of the reform components, the development of resistance levels of individual interest groups, breach of contract as a rational alternative, causes unwanted price effects, shifting interest situations of major stakeholders, change dynamics impending regulatory risks, pending financing risks, stranded cost-conflict situations for power stations disconnected from the grid and facilities and instruments of a political and regulatory risk management for reforms. With numerous examples, background analyzes and instruments to reform analysis, this book is aimed at investors, policy planners and analysts. [de

Health sector reform in Argentina: a cautionary tale.

Science.gov (United States)

Lloyd-Sherlock, Peter

2005-04-01

In November 2002 the World Bank published a report on the Argentine health sector. The report accurately portrays the complexity and severity of the problems facing the health care system. It stresses that these problems are not purely a product of the country's economic collapse, noting that the system has suffered from long-standing structural problems and inefficiencies. Curiously, the report makes no mention of the leading role played by the World Bank in health reform efforts during the 1990s. This paper demonstrates that these reforms did much to worsen pre-existing weaknesses of the sector. The paper criticises the content of the reform agenda and the manner in which it was produced, arguing that these were reforms in which considerations of public health were less significant than conformity to the wider model of neo-liberal social and economic development prevailing at the time. It also highlights problems of implementing the reform agenda, which reduced the coherency of the reforms. The paper goes on to examine the impact of the crisis, noting links with the preceding reforms. It identifies a number of insights and lessons of potential value to other countries which are pursuing similar policies.

Digital simulation of FM-ZCS-quasi resonant converter fed DD servo drive using Matlab Simulink

Directory of Open Access Journals (Sweden)

Kattamuri Narasimha Rao

2009-01-01

Full Text Available This paper deals with digital simulation of FM-ZCS-quasi resonant converter fed DC servo drive using Matlab Simulink. Quasi Resonant Converter (QRC is fast replacing conventional PWM converters in high frequency operation. The salient feature of QRC is that the switching devices can be either switched on at zero voltage or switched off at zero current, so that switching losses are zero ideally. Switching stresses are low, volumes are low and power density is high. This property imparts high efficiency and high power density to the converters. The output of QRC is regulated by varying the switching frequency of the converter. Hence it is called Frequency modulated Zero current/zero voltage switching quasi resonant converter. The present work deals with simulation of DC Servo motor fed from ZCS-QRC using Matlab. Simulation results show that the ZCS-QRC's have low total harmonic distortion. The ZCS-QRC operating in half wave and full wave modes are simulated successfully. .

On being African and Reformed? Towards an African Reformed ...

African Journals Online (AJOL)

2014-06-17

Jun 17, 2014 ... It is furthermore our contention that the notion of culture and African worldviews was always perceived negatively ..... dean of the South East Asia Graduate School of Theology. He later .... Another Reformed church for Indian.

Development of a Gas-Fed Pulse Detonation Research Engine

Science.gov (United States)

Litchford, Ron J.; Hutt, John (Technical Monitor)

2001-01-01

In response to the growing need for empirical data on pulse detonation engine performance and operation, NASA Marshall Space Flight Center has developed and placed into operation a low-cost gas-fed pulse detonation research engine. The guiding design strategy was to achieve a simple and flexible research apparatus, which was inexpensive to build and operate. As such, the engine was designed to operate as a heat sink device, and testing was limited to burst-mode operation with run durations of a few seconds. Wherever possible, maximum use was made of standard off-the-shelf industrial or automotive components. The 5-cm diameter primary tube is about 90-cm long and has been outfitted with a multitude of sensor and optical ports. The primary tube is fed by a coaxial injector through an initiator tube, which is inserted directly into the injector head face. Four auxiliary coaxial injectors are also integrated into the injector head assembly. All propellant flow is controlled with industrial solenoid valves. An automotive electronic ignition system was adapted for use, and spark plugs are mounted in both tubes so that a variety of ignition schemes can be examined. A microprocessor-based fiber-optic engine control system was developed to provide precise control over valve and ignition timing. Initial shakedown testing with hydrogen/oxygen mixtures verified the need for Schelkin spirals in both the initiator and primary tubes to ensure rapid development of the detonation wave. Measured pressure wave time-of-flight indicated detonation velocities of 2.4 km/sec and 2.2 km/sec in the initiator and primary tubes, respectively. These values implied a fuel-lean mixture corresponding to an H2 volume fraction near 0.5. The axial distribution for the detonation velocity was found to be essentially constant along the primary tube. Time-resolved thrust profiles were also acquired for both underfilled and overfilled tube conditions. These profiles are consistent with previous time

Narratives of change and reform processes: global and local transactions in French psychiatric hospital reform after the Second World War.

Science.gov (United States)

Henckes, Nicolas

2009-02-01

As with the rest of biomedicine, psychiatry has, since the Second World War, developed under the strong influence of the transnational accumulation of a whole series of practices and knowledge. Anthropology has taught us to pay attention to the transactions between local-level actors and those operating at the global level in the construction of this new world of medicine. This article examines the role played by the recommendations of the WHO Expert Committee of Mental Health in the reform of the French mental health system during the 1950s. Rooted in the experience of practitioners and administrators participating in the process of reforming local psychiatric systems, the recommendations of the WHO Expert Committee developed a new vision of regulating psychiatry, based on professionalism and an idea of a normativity of the doctor-patient relation. This article shows how, by mobilizing the WHO reports' recommendations, French administrators and doctors succeeded in creating a typically French object: "the psychiatric sector", founded on elaborating a new mandate for the psychiatric profession. The article thus questions the deinstitutionalization model as an explanation of transformations of the structure of the French psychiatry system in the post-war period.

Quality Reforms in Danish Home Care

DEFF Research Database (Denmark)

Rostgaard, Tine

2012-01-01

. This reform strategy represents a shift from the welfare state modernisation program of the 1980s, which built mainly on economic strategies of cost-efficiency and New Public Management (NPM) princi-ples, including contract management and performance management. Recent reforms have instead attempted...

Contrasting evolution patterns between glacier-fed and non-glacier-fed lakes in the central Tibetan Plateau and driving force analysis

Science.gov (United States)

Song, C.; Sheng, Y.

2015-12-01

High-altitude lakes in the Tibetan Plateau (TP) showed strong spatio-temporal variability during past decades. The lake dynamics can be associated with several key factors including lake type, supply of glacial meltwater, local climate variations. It is important to differentiate these factors when analyzing the driving force of lakes dynamics. With a focus on lakes over the Tanggula Mountains of the central TP, this study investigates the temporal evolution patterns of lake area and water level of different types: glacier-fed closed lake, non-glacier-fed closed lake and upstream lake (draining into closed lakes). We collected all available Landsat archive data and quantified the inter-annual variability of lake extents. Results show accelerated expansions of both glacier-fed and non-glacier-fed lakes during 1970s-2013, and different temporal patterns of the two types of lakes: the non-glacier-fed lakes displayed a batch-wise growth pattern, with obvious growth in 2002, 2005 and 2011 and slight changes in other years, while glacier-fed lakes showed steady expanding tendency. The contrasting patterns are confirmed by the distinction of lake level change between the two groups derived from satellite altimetry during 2003-2009. The upstream lakes remained largely stable due to natural drainage regulation. The intermittent expansions for non-glacier-fed lakes were found to be related to excessive precipitation events and positive "precipitation-evaporation". In contrast, glacier-fed lake changes showed weak correlations with precipitation variations, which imply a joint contribution from glacial meltwater to water budgets. A simple estimation reveals that the increased water storage for all of examined lakes contributed from precipitation/evaporation (0.31±0.09 Gt/yr) slightly overweighed the glacial meltwater supply (0.26±0.08 Gt/yr).

Control and experimental characterization of a methanol reformer for a 350 W high temperature polymer electrolyte membrane fuel cell system

DEFF Research Database (Denmark)

Andreasen, Søren Juhl; Kær, Søren Knudsen; Sahlin, Simon Lennart

2013-01-01

is the water and methanol mixture fuel flow and the burner fuel/air ratio and combined flow. An experimental setup is presented capable of testing the methanol reformer used in the Serenergy H3 350 Mobile Battery Charger; a high temperature polymer electrolyte membrane (HTPEM) fuel cell system......This work presents a control strategy for controlling the methanol reformer temperature of a 350 W high temperature polymer electrolyte membrane fuel cell system, by using a cascade control structure for reliable system operation. The primary states affecting the methanol catalyst bed temperature....... The experimental system consists of a fuel evaporator utilizing the high temperature waste gas from the cathode air cooled 45 cell HTPEM fuel cell stack. The fuel cells used are BASF P1000 MEAs which use phosphoric acid doped polybenzimidazole membranes. The resulting reformate gas output of the reformer system...

Negotiating science and engineering: an exploratory case study of a reform-minded science teacher

Science.gov (United States)

Guzey, S. Selcen; Ring-Whalen, Elizabeth A.

2018-05-01

Engineering has been slowly integrated into K-12 science classrooms in the United States as the result of recent science education reforms. Such changes in science teaching require that a science teacher is confident with and committed to content, practices, language, and cultures related to both science and engineering. However, from the perspective of the science teacher, this would require not only the development of knowledge and pedagogies associated with engineering, but also the construction of new identities operating within the reforms and within the context of their school. In this study, a middle school science teacher was observed and interviewed over a period of nine months to explore his experiences as he adopted new values, discourses, and practices and constructed his identity as a reform-minded science teacher. Our findings revealed that, as the teacher attempted to become a reform-minded science teacher, he constantly negotiated his professional identities - a dynamic process that created conflicts in his classroom practices. Several differences were observed between the teacher's science and engineering instruction: hands-on activities, depth and detail of content, language use, and the way the teacher positioned himself and his students with respect to science and engineering. Implications for science teacher professional development are discussed.

Energy market reform and greenhouse gas emission reductions

International Nuclear Information System (INIS)

Anon.

1999-01-01

The report reviews micro-economic reform in the energy market and measures the impact that energy market reform is expected to have on greenhouse gas outcomes. It indicates that reform in the electricity and gas industries is delivering what was promised, an efficient market with lower energy prices and, over the longer term, will deliver a gradually reducing rate of greenhouse gas emissions per unit of energy produced. It also recognises that energy market reform has removed some barriers to the entry of less greenhouse gas intense fuels. These trends will result in reduced greenhouse gas intensity in the supply of energy and significant reductions in the growth in greenhouse gas emissions compared to what may have been expected without the reforms

TWR Bench-Scale Steam Reforming Demonstration

Energy Technology Data Exchange (ETDEWEB)

Marshall, D.W.; Soelberg, N.R.

2003-05-21

The Idaho Nuclear Technology and Engineering Center (INTEC) was home to nuclear fuel reprocessing activities for decades at the Idaho National Engineering and Environmental Laboratory. As a result of the reprocessing activities, INTEC has accumulated approximately one million gallons of acidic, radioactive, sodium-bearing waste (SBW). The purpose of this demonstration was to investigate a reforming technology, offered by ThermoChem Waste Remediation, LLC, (TWR) for treatment of SBW into a ''road ready'' waste form that would meet the waste acceptance criteria for the Waste Isolation Pilot Plant (WIPP). TWR is the licensee of Manufacturing Technology Conservation International (MTCI) steam-reforming technology in the field of radioactive waste treatment. A non-radioactive simulated SBW was used based on the known composition of waste tank WM-180 at INTEC. Rhenium was included as a non-radioactive surrogate for technetium. Data was collected to determine the nature and characteristics of the product, the operability of the technology, the composition of the off-gases, and the fate of key radionuclides (cesium and technetium) and volatile mercury compounds. The product contained a low fraction of elemental carbon residues in the cyclone and filter vessel catches. Mercury was quantitatively stripped from the product but cesium, rhenium (Tc surrogate), and the heavy metals were retained. Nitrate residues were about 400 ppm in the product and NOx destruction exceeded 86%. The demonstration was successful.

TWR Bench-Scale Steam Reforming Demonstration

Energy Technology Data Exchange (ETDEWEB)

D. W. Marshall; N. R. Soelberg

2003-05-01

The Idaho Nuclear Technology and Engineering Center (INTEC) was home to nuclear fuel reprocessing activities for decades at the Idaho National Engineering and Environmental Laboratory. As a result of the reprocessing activities, INTEC has accumulated approximately one million gallons of acidic, radioactive, sodium-bearing waste (SBW). The purpose of this demonstration was to investigate a reforming technology, offered by ThermoChem Waste Remediation, LLC, (TWR) for treatment of SBW into a "road ready" waste form that would meet the waste acceptance criteria for the Waste Isolation Pilot Plant (WIPP). TWR is the licensee of Manufacturing Technology Conservation International (MTCI) steam-reforming technology in the field of radioactive waste treatment. A non-radioactive simulated SBW was used based on the known composition of waste tank WM-180 at INTEC. Rhenium was included as a non-radioactive surrogate for technetium. Data was collected to determine the nature and characteristics of the product, the operability of the technology, the composition of the off-gases, and the fate of key radionuclides (cesium and technetium) and volatile mercury compounds. The product contained a low fraction of elemental carbon residues in the cyclone and filter vessel catches. Mercury was quantitatively stripped from the product but cesium, rhenium (Tc surrogate), and the heavy metals were retained. Nitrate residues were about 400 ppm in the product and NOx destruction exceeded 86%. The demonstration was successful.

Reforming the reform: the Greek National Health System in transition.

Science.gov (United States)

Tountas, Yannis; Karnaki, Panagiota; Pavi, Elpida

2002-10-01

The National Health System (ESY) in Greece, which was established in 1983, is in a state of continuous crisis. This situation is caused mainly by the system's problematic administration, low productivity and inadequate Primary Health Care. These have led the re-elected PASOK government to introduce by the end of 2000 a radical reform of the health system. The 200 reform measures announced by the new Minister of Health and Welfare include changes aiming at: the decentralization of the ESY, the creation of a unified financing system for the social insurance funds, a new management structure in public hospitals, the organization of a Primary Health System in urban areas, and the strengthening of Public Health and Health Promotion. These changes are presented and discussed in this paper.

The Theory of Grid Investment and Governance from the Perspective of New Regulation: Enlightenment on China's Electric Power System Reform

Institute of Scientific and Technical Information of China (English)

FENG Yong-sheng

2016-01-01

The main contents of theoretical studies on grid investment and governance include the business investment patterns,the regulated investment patterns,and the incentive and efficiency issues of the power grid ownership and the operating right under the implementation of the integrated structure and separated structure.The commercial investment mode relies on the assumption of near-perfect competition and the separated structure of the grid ownership and the system operating right,which in reality is prone to distorted incentives for grid investment and easy to generate team moral hazards,thus it is difficult to ensure effective grid investment in the competitive electricity market.By relying on incentive regulation,the integrated structure of the grid ownership and the system operating right under the regulated investment mode can avoid moral hazard in the teams and various distorted investment incentives.Comparatively speaking,the regulated investment mode is a more appropriate one to be the main target pattern for the grid investment during China's power market reform.The power grid governance should focus on the release of the potential efficiency under the integrated structure of the grid ownership and the right to operate the system.The power system reform must take a coordinated promotion of the construction of a competitive market and the reform of the grid management system,so as to avoid becoming a simple interest re-adjustment.

Development and validation of a CFD-based steam reformer model

DEFF Research Database (Denmark)

Kær, Søren Knudsen; Dahlqvist, Mathis; Saksager, Anders

2006-01-01

Steam reforming of liquid biofuels (ethanol, bio-diesel etc.) represents a sustainable source of hydrogen for micro Combined Heat and Power (CHP) production as well as Auxiliary Power Units (APUs). In relation to the design of the steam reforming reactor several parameter are important including...... for expensive prototypes. This paper presents an advanced Computational Fluid Dynamics based model of a steam reformer. The model was implemented in the commercial CFD code Fluent through the User Defined Functions interface. The model accounts for the flue gas flow as well as the reformate flow including...... a detailed mechanism for the reforming reactions. Heat exchange between the flue gas and reformate streams through the reformer reactor walls was also included as a conjugate heat transfer process.  From a review of published models for the catalytic steam reforming of ethanol and preliminary predictions...

High Efficiency Solar-based Catalytic Structure for CO₂ Reforming

Energy Technology Data Exchange (ETDEWEB)

Menkara, Hisham [PhosphorTech Corporation, Kennesaw, GA (United States)

2013-09-30

Throughout this project, we developed and optimized various photocatalyst structures for CO₂ reforming into hydrocarbon fuels and various commodity chemical products. We also built several closed-loop and continuous fixed-bed photocatalytic reactor system prototypes for a larger-scale demonstration of CO₂ reforming into hydrocarbons, mainly methane and formic acid. The results achieved have indicated that with each type of reactor and structure, high reforming yields can be obtained by refining the structural and operational conditions of the reactor, as well as by using various sacrificial agents (hole scavengers). We have also demonstrated, for the first time, that an aqueous solution containing acid whey (a common bio waste) is a highly effective hole scavenger for a solar-based photocatalytic reactor system and can help reform CO₂ into several products at once. The optimization tasks performed throughout the project have resulted in efficiency increase in our conventional reactors from an initial 0.02% to about 0.25%, which is 10X higher than our original project goal. When acid whey was used as a sacrificial agent, the achieved energy efficiency for formic acid alone was ~0.4%, which is 16X that of our original project goal and higher than anything ever reported for a solar-based photocatalytic reactor. Therefore, by carefully selecting sacrificial agents, it should be possible to reach energy efficiency in the range of the photosynthetic efficiency of typical crop and biofuel plants (1-3%).

The application of inelastic neutron scattering to investigate the steam reforming of methane over an alumina-supported nickel catalyst

International Nuclear Information System (INIS)

McFarlane, Andrew R.; Silverwood, Ian P.; Norris, Elizabeth L.; Ormerod, R. Mark; Frost, Christopher D.; Parker, Stewart F.; Lennon, David

2013-01-01

Highlights: • Inelastic neutron scattering has been used to investigate a Ni/alumina catalyst. • The extent of hydrogen retention by the catalyst has been determined. • Filamentous carbon is identified as a by-product. - Abstract: An alumina-supported nickel catalyst, previously used in methane reforming experiments employing CO 2 as the oxidant, is applied here in the steam reforming variant of the process. Micro-reactor experiments are used to discern an operational window compatible with sample cells designed for inelastic neutron scattering (INS) experiments. INS spectra are recorded after 6 h reaction of a 1:1 mixture of CH 4 and H 2 O at 898 K. Weak INS spectra are observed, indicating minimal hydrogen retention by the catalyst in this operational regime. Post-reaction, the catalyst is further characterised by powder X-ray diffraction, transmission electron microscopy and Raman scattering. In a comparable fashion to that seen for the ‘dry’ reforming experiments, the catalyst retains substantial quantities of carbon in the form of filamentous coke. The role for hydrogen incorporation by the catalyst is briefly considered

The application of inelastic neutron scattering to investigate the steam reforming of methane over an alumina-supported nickel catalyst

Energy Technology Data Exchange (ETDEWEB)

McFarlane, Andrew R.; Silverwood, Ian P. [School of Chemistry, Joseph Black Building, University of Glasgow, Glasgow G12 8QQ (United Kingdom); Norris, Elizabeth L.; Ormerod, R. Mark [Department of Chemistry, School of Physical and Geographical Sciences, Keele University, Staffs ST5 5BG (United Kingdom); Frost, Christopher D.; Parker, Stewart F. [ISIS Facility, STFC Rutherford Appleton Laboratory, Chilton, Didcot, Oxon OX11 0QX (United Kingdom); Lennon, David, E-mail: David.Lennon@glasgow.ac.uk [School of Chemistry, Joseph Black Building, University of Glasgow, Glasgow G12 8QQ (United Kingdom)

2013-12-12

Highlights: • Inelastic neutron scattering has been used to investigate a Ni/alumina catalyst. • The extent of hydrogen retention by the catalyst has been determined. • Filamentous carbon is identified as a by-product. - Abstract: An alumina-supported nickel catalyst, previously used in methane reforming experiments employing CO{sub 2} as the oxidant, is applied here in the steam reforming variant of the process. Micro-reactor experiments are used to discern an operational window compatible with sample cells designed for inelastic neutron scattering (INS) experiments. INS spectra are recorded after 6 h reaction of a 1:1 mixture of CH{sub 4} and H{sub 2}O at 898 K. Weak INS spectra are observed, indicating minimal hydrogen retention by the catalyst in this operational regime. Post-reaction, the catalyst is further characterised by powder X-ray diffraction, transmission electron microscopy and Raman scattering. In a comparable fashion to that seen for the ‘dry’ reforming experiments, the catalyst retains substantial quantities of carbon in the form of filamentous coke. The role for hydrogen incorporation by the catalyst is briefly considered.

Organochlorine compounds in breast-fed vs. bottle-fed infants: preliminary results at six weeks of age

Energy Technology Data Exchange (ETDEWEB)

Lackmann, G.-M.; Schaller, K.-H.; Angerer, J

2004-08-15

Background: Polychlorinated biphenyls (PCBs), hexachlorobenzene (HCB), and 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (DDT) are ubiquitous compounds with carcinogenic and teratogenic properties. They are chemically very stable and lipophilic and, therefore, accumulate in our food-chain. They are prenatally transmitted from mother to foetus, and mother's milk due to its high lipid content is an elimination pathway of special importance. Therefore, breast-feeding has been held responsible for elevated concentrations of these organochlorine compounds as well as for harmful effects in children later in life. Methods: Blood samples (2.5 ml) were taken from each 10 breast-fed and bottle-fed infants at 6 weeks of age. Blood specimens were immediately centrifuged, and serum was stored in glass tubes at -20 degree sign C until analysis. Three higher chlorinated PCB congeners (IUPAC nos. 138, 153 and 180), HCB, and the organic metabolite of DDT, p,p<<-DDE, were analysed with capillary gas chromatography with electron capture detection. Reliability was tested with gas chromatography-mass spectrometry. Results: There were no differences between the study groups of breast-fed and bottle-fed infants with regard to sex distribution, gestational age, birth-weight, age of the mothers, and smoking behaviour of the parents. In contrast, serum concentrations of all organochlorine compounds were significantly higher (P<0.0001) in breast-fed than in bottle-fed infants (mean): PCB 138, 0.38 vs. 0.10 {mu}g/l; PCB 153, 0.49 vs. 0.1 {mu}g/l; PCB 180, 0.31 vs. 0.04 {mu}g/l; {sigma}PCB, 1.19 vs. 0.29 {mu}g/l; HCB, 0.13 vs. 0.04 {mu}g/l; p,p<<-DDE, 1.05 vs. 0.18 {mu}g/l. Conclusions: Breast-feeding significantly increases the pollution of our infants with different organochlorine compounds as early as at 6 weeks of age. The progress of the present study will show whether this pollution will further increase with longer duration of breast-feeding, and whether breast-feeding bears any

Organochlorine compounds in breast-fed vs. bottle-fed infants: preliminary results at six weeks of age

International Nuclear Information System (INIS)

Lackmann, G.-M.; Schaller, K.-H.; Angerer, J.

2004-01-01

Background: Polychlorinated biphenyls (PCBs), hexachlorobenzene (HCB), and 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (DDT) are ubiquitous compounds with carcinogenic and teratogenic properties. They are chemically very stable and lipophilic and, therefore, accumulate in our food-chain. They are prenatally transmitted from mother to foetus, and mother's milk due to its high lipid content is an elimination pathway of special importance. Therefore, breast-feeding has been held responsible for elevated concentrations of these organochlorine compounds as well as for harmful effects in children later in life. Methods: Blood samples (2.5 ml) were taken from each 10 breast-fed and bottle-fed infants at 6 weeks of age. Blood specimens were immediately centrifuged, and serum was stored in glass tubes at -20 degree sign C until analysis. Three higher chlorinated PCB congeners (IUPAC nos. 138, 153 and 180), HCB, and the organic metabolite of DDT, p,p<<-DDE, were analysed with capillary gas chromatography with electron capture detection. Reliability was tested with gas chromatography-mass spectrometry. Results: There were no differences between the study groups of breast-fed and bottle-fed infants with regard to sex distribution, gestational age, birth-weight, age of the mothers, and smoking behaviour of the parents. In contrast, serum concentrations of all organochlorine compounds were significantly higher (P<0.0001) in breast-fed than in bottle-fed infants (mean): PCB 138, 0.38 vs. 0.10 μg/l; PCB 153, 0.49 vs. 0.1 μg/l; PCB 180, 0.31 vs. 0.04 μg/l; ΣPCB, 1.19 vs. 0.29 μg/l; HCB, 0.13 vs. 0.04 μg/l; p,p<<-DDE, 1.05 vs. 0.18 μg/l. Conclusions: Breast-feeding significantly increases the pollution of our infants with different organochlorine compounds as early as at 6 weeks of age. The progress of the present study will show whether this pollution will further increase with longer duration of breast-feeding, and whether breast-feeding bears any health risks for our

La reforma del procedimiento de reforma constitucional en España // The reform of the the Spanish constitutional reform procedure

Directory of Open Access Journals (Sweden)

José Manuel Vera Santos

2016-08-01

the kitchen. 1. Title X of the Spanish Constitution of 1978. 1.1. Constitutional reform initiative and its temporal limits (arts. 166 and 169. 1.2. The reform procedure under article 167. 1.3. The reform procedure under article 168. 2. Possible and desirable reforms or how the sleep of reason can produce monsters, although it should not. 2.1. Previous reflections. 2.2. Regarding the initiative in both procedures. 2.3. Regarding the considerations set out in article 167.2. 2.4. Regarding the stipulations set out in article 168. 3. Provided proposals.

JP8 Reformation for Combat Vehicles

Science.gov (United States)

2007-08-07

phase (fuel), and a gas phase (hydrogen) at elevated pressures. • Trickle - bed configuration is difficult to model and scale down—not practical for...gases output from HDS reactor are used to fuel the reformer. Current Technology Status: •Integrated desulfurization/reforming system successfully

Market reforms in Swedish health care

DEFF Research Database (Denmark)

Diderichsen, Finn

1993-01-01

This report presents the main characteristics of reforms in the Swedish health services, as exemplified by the "Stockholm Model" introduced in 1992 in Stockholm county. The author discusses the motives behind these reforms, the already-evident increases in costs that are occurring, and the effect...

Market screening of natural gas reformers

International Nuclear Information System (INIS)

Themsen, J.; Pagh Nielsen, M.; Knudsen Kaer, S.

2005-01-01

This report presents results from the project: Market screening of natural gas reformers. The project objective was to screen the natural gas reformers available on the international market. The technology is developing rapidly, and the results from this project will assist in determining the focus for the future Danish activities and in setting up ambitious and realistic targets. The reformer screening is partly based on AAU and Dantherm's experiences from previous studies, and the screening has been further extended with a number of activities, including seminars and contact with some of the most interesting suppliers. (BA)

On the reform of nuclear licensing procedures for plants and operation

International Nuclear Information System (INIS)

Lecheler, H.

1977-01-01

The nuclear licensing procedures require basic reforming. In doing so, there must be a differentiation between (concrete) licensing of plants and (abstract) decisions on site provision. The provision of sites is exercised directly by the diets of the Laender. For this purpose they enact planning laws on sites for nuclear power plants of different sizes. As far as the Federal law is touched upon (especially the Federal act on construction), the Federal legislator has to concede competences to the Laender. No. 6 of section 7 II of the Atomic Energy Act would have to be deleted. The plant licensing procedure is to be limited to a mere safety check-up of a concrete plant. Licensing prerequisites of the Atomic Energy Act are to be made more precise by the Federal legislator, namely by deciding unequivocally the purpose of the law, whether priority is given to promotion or to protection, and by making the enacting of tangible regulations a duty. When these licensing prerequisites exist, the law has to concede the applicant a plain title to licensing. (orig.) [de

Global implications of China's healthcare reform.

Science.gov (United States)

Yan, Fei; Tang, Shenglan; Zhang, Jian

2016-01-01

The ongoing healthcare reform in China has a powerful spillover effect beyond the health sector and the borders of China. A successful completion of the Chinese reform will offer a new model for social justice development, shift the global economy toward sustainability and create a new hub for science and technology in medical and health science. However, reforming the healthcare system in the most populated country is a daunting task. China will not live up to its promise, and all the potentials may end with hype not hope if coherent national strategies are not constructed and state-of-the-art navigation is not achieved with staggering domestic and global challenges. The cost of failure will be immensely high, socioeconomic costs for Chinese and an opportunity cost for the world as a whole. A full appreciation of the global implications of China's healthcare reform is crucial in keeping China receptive toward good practices evidence-approved elsewhere and open minded to fulfill its international obligations. More critically, the appreciation yields constructive engagements from global community toward a joint development and global prosperity. The current report provides a multiple disciplinary assessment on the global implications of the healthcare reform in China. Copyright © 2014 John Wiley & Sons, Ltd.

Session 4: On-board exhaust gas reforming for improved performance of natural gas HCCI engines

Energy Technology Data Exchange (ETDEWEB)

Amieiro, A.; Golunski, S.; James, D. [Johnson Matthey Technology Centre, Sonning Common, Reading (United Kingdom); Miroslaw, Wyszynski; Athanasios, Megaritis; Peucheret, S. [Birmingham Univ., School of Engineering, Future Power Systems Research Group (United Kingdom); Hongming, Xu [Jaguar Cars Ltd, W/2/021 Engineering Centre, Whitley, Coventry (United Kingdom)

2004-07-01

Although natural gas (NG) is a non-renewable energy source, it is still a very attractive alternative fuel for transportation - it is inexpensive, abundant, and easier to refine than petroleum. Unfortunately the minimum spark energy required for NG ignition is higher than for liquid fuels, and engine performance is reduced since the higher volume of NG limits the air breathing capacity of the cylinders. On the other hand, the flammability range of NG is wider than for other hydrocarbons, so the engine can operate under leaner conditions. Environmentally, the use of NG is particularly attractive since it has a low flame temperature (resulting in reduced NO{sub x} emissions) and a low carbon content compared to diesel or gasoline (resulting in less CO, CO{sub 2} and particulate). In addition, NG is easily made sulphur-free, and has a high octane rating (RON = 110-130) which makes it suitable for high compression engine applications. Exhaust gas recirculation (EGR) into an engine is known to reduce both flame temperature and speed, and therefore produce lower NO{sub x} emissions. In general, a given volume of exhaust gas has a greater effect on flame speed and NO{sub x} emissions than the same quantity of excess air, although there is a limit to the amount of exhaust gas recirculation that can be used without inhibiting combustion. However, hydrogen addition to exhaust gas recirculation has been proved to reduce emissions while increasing flame speed, so improving both the emissions and the thermal efficiency of the engine. On-board reforming of some of the fuel, by reaction with exhaust gas during EGR, is a novel way of adding hydrogen to an engine. We have carried out reforming tests on mixtures of natural gas and exhaust gas at relatively low temperatures (400-600 C), to mimic the low availability of external heat within the integrated system. The reforming catalyst is a nickel-free formulation, containing precious metals promoted by metal oxides. The roles of

Effects of hydraulic retention time on anaerobic hydrogenation performance and microbial ecology of bioreactors fed with glucose-peptone and starch-peptone

Energy Technology Data Exchange (ETDEWEB)

Li, Shiue-Lin; Chao, Yu-Chieh; Wang, Yu-Hsuan; Hsiao, Chia-Jung; Bai, Ming-Der [Department of Environmental Engineering, National Cheng-Kung University, No. 1, University Road, Tainan 701 (China); Whang, Liang-Ming; Wang, Yung-Fu; Cheng, Sheng-Shung [Department of Environmental Engineering, National Cheng-Kung University, No. 1, University Road, Tainan 701 (China); Sustainable Environment Research Center (SERC), National Cheng-Kung University, No. 1, University Road, Tainan 701 (China); Tseng, I.-Cheng [Sustainable Environment Research Center (SERC), National Cheng-Kung University, No. 1, University Road, Tainan 701 (China); Department of Life Science, National Cheng-Kung University, No. 1, University Road, Tainan 701 (China)

2010-01-15

This study evaluated anaerobic hydrogenation performance and microbial ecology in bioreactors operated at different hydraulic retention time (HRT) conditions and fed with glucose-peptone (GP) and starch-peptone (SP). The maximum hydrogen production rates for GP- and SP-fed bioreactors were found to be 1247 and 412 mmol-H{sub 2}/L/d at HRT of 2 and 3 h, respectively. At HRT > 8 h, hydrogen consumption due to peptone fermentation could occur and thus reduced hydrogen yield from carbohydrate fermentation. Results of cloning/sequencing and denaturant gradient gel electrophoresis (DGGE) indicated that Clostridium sporogenes and Clostridium celerecrescens were dominant hydrogen-producing bacteria in the GP-fed bioreactor, presumably due to their capability on protein hydrolysis. In the SP-fed bioreactor, Lactobacillus plantarum, Propionispira arboris, and Clostridium butyricum were found to be dominant populations, but the presence of P. arboris at HRT > 3 h might be responsible for a lower hydrogen yield from starch fermentation. As a result, optimizing HRT operation for bioreactors was considered an important asset in order to minimize hydrogen-consuming activities and thus maximize net hydrogen production. The limitation of simple parameters such as butyrate to acetate ratio (B/A ratio) in predicting hydrogen production was recognized in this study for bioreactors fed with multiple substrates. It is suggested that microbial ecology analysis, in addition to chemical analysis, should be performed when complex substrates and mixed cultures are used in hydrogen-producing bioreactors. (author)

Fed-Batch Biomolecule Production by Bacillus subtilis: A State of the Art Review.

Science.gov (United States)

Ÿztürk, Sibel; Ÿalık, Pınar; Ÿzdamar, Tunçer H

2016-04-01

Bacillus subtilis is a highly promising production system for various biomolecules. This review begins with the algorithm of fed-batch operations (FBOs) and then illustrates the approaches to design the initial production medium and/or feed stream. Additionally, the feeding strategies developed with or without feedback control for fed-batch B. subtilis fermentations were compiled with a special emphasis on recombinant protein (r-protein) production. For biomolecule production by wild-type B. subtilis, due to the different intracellular production patterns, no consensus exists on the FBO strategy that gives the maximum productivity, whereas for r-protein production appropriate feeding strategies vary depending on the promoter used. Thus, we conclude that the B. subtilis community is still seeking an approved strong promoter and generalized FBO strategies. Copyright © 2015 Elsevier Ltd. All rights reserved.

Steam reforming of commercial ultra-low sulphur diesel

Energy Technology Data Exchange (ETDEWEB)

Boon, J.; Van Dijk, E.; De Munck, S.; Van den Brink, R. [Energy research Centre of The Netherlands, ECN Hydrogen and Clean Fossil Fuels, P.O. Box 1, NL1755ZG Petten (Netherlands)

2011-03-11

Two main routes for small-scale diesel steam reforming exist: low-temperature pre-reforming followed by well-established methane steam reforming on the one hand and direct steam reforming on the other hand. Tests with commercial catalysts and commercially obtained diesel fuels are presented for both processes. The fuels contained up to 6.5 ppmw sulphur and up to 4.5 vol.% of biomass-derived fatty acid methyl ester (FAME). Pre-reforming sulphur-free diesel at around 475C has been tested with a commercial nickel catalyst for 118 h without observing catalyst deactivation, at steam-to-carbon ratios as low as 2.6. Direct steam reforming at temperatures up to 800C has been tested with a commercial precious metal catalyst for a total of 1190 h with two catalyst batches at steam-to-carbon ratios as low as 2.5. Deactivation was neither observed with lower steam-to-carbon ratios nor for increasing sulphur concentration. The importance of good fuel evaporation and mixing for correct testing of catalysts is illustrated. Diesel containing biodiesel components resulted in poor spray quality, hence poor mixing and evaporation upstream, eventually causing decreasing catalyst performance. The feasibility of direct high temperature steam reforming of commercial low-sulphur diesel has been demonstrated.

Steam reforming of commercial ultra-low sulphur diesel

Science.gov (United States)

Boon, Jurriaan; van Dijk, Eric; de Munck, Sander; van den Brink, Ruud

Two main routes for small-scale diesel steam reforming exist: low-temperature pre-reforming followed by well-established methane steam reforming on the one hand and direct steam reforming on the other hand. Tests with commercial catalysts and commercially obtained diesel fuels are presented for both processes. The fuels contained up to 6.5 ppmw sulphur and up to 4.5 vol.% of biomass-derived fatty acid methyl ester (FAME). Pre-reforming sulphur-free diesel at around 475 °C has been tested with a commercial nickel catalyst for 118 h without observing catalyst deactivation, at steam-to-carbon ratios as low as 2.6. Direct steam reforming at temperatures up to 800 °C has been tested with a commercial precious metal catalyst for a total of 1190 h with two catalyst batches at steam-to-carbon ratios as low as 2.5. Deactivation was neither observed with lower steam-to-carbon ratios nor for increasing sulphur concentration. The importance of good fuel evaporation and mixing for correct testing of catalysts is illustrated. Diesel containing biodiesel components resulted in poor spray quality, hence poor mixing and evaporation upstream, eventually causing decreasing catalyst performance. The feasibility of direct high temperature steam reforming of commercial low-sulphur diesel has been demonstrated.

Validity Theory: Reform Policies, Accountability Testing, and Consequences

Science.gov (United States)

Chalhoub-Deville, Micheline

2016-01-01

Educational policies such as Race to the Top in the USA affirm a central role for testing systems in government-driven reform efforts. Such reform policies are often referred to as the global education reform movement (GERM). Changes observed with the GERM style of testing demand socially engaged validity theories that include consequential…

The reform of the Italian Yachting Code

Directory of Open Access Journals (Sweden)

Alberto Pasino

2018-02-01

Full Text Available The purpose of this paper is to address the legislative reform of the recreational boating legislation currently pending in Italy (Law 167/2015, which has delegated the power to reform the Yachting Code to the Italian Government with a specific focus on the relationship between the Yachting Code and the Navigation Code. The issue will be addressed through an analysis of the history of the relationship between the rules governing recreational boating and the general navigation legislation in Italy. Starting with an analysis of the first few rules of the Navigation Code devoted to recreational boating, which had been regulated together with the forms of operation of the ship for economic purposes, the discussion will then review the contents of Law 50/1971 (s.c. ‘’piccolo codice della nautica da diporto’’, which led to the first division between recreational boating and general navigation legislation. Law 172/2003 – a piece of legislation which was intended to reorganize and boost recreational boating and nautical tourism – will also be mentioned, considering the legislator’s attempt to make the rules governing recreational boating fully autonomous from the general maritime legislation. Law 171/2005 (s.c. ‘’codice della nautica da diporto’’ will then be briefly reviewed, with particular emphasis on the legislator’s choice to recognize that recreational boating rules have a special nature in relation to general navigation legislation, but are not fully autonomous from it. The paper will finally focus on the choice made by the legislator through Law 167/2015 – an act which delegates the Government to reform the Yacting Code – which confirms the approach chosen by the ‘’codice della nautica da diporto’’, and on the consequences of such choice on legal institutions such as the shipowner’s limitation of liability.

Thoughts on a comprehensive tax reform

Institute of Scientific and Technical Information of China (English)

Li Wanfu

2015-01-01

"The Decision on Several Major Issues Regarding the Deepening of Reform" adopted by the Third Plenum of the Eighteenth Session of the CPC Central Committee gave a new position to the next round of tax reform,and proposed its objectives,tone,mission,and core tasks.The new round of tax reform should cover a wide range of issues,including state governance,tax legislation,economic reform and development,social management,globalization,ecological and environmental protection,improvement of tax collection,as well as other related issues.Particular attention should be paid to replacing business tax with VAT,completing legislation on VAT,adjusting the scope,collection mechanisms,and rates of consumption tax;strengthening regulation and control,implementing a personal income tax system that considers both aggregate income and income by source,promoting real estate tax legislation,expanding the ad valorem natural resource tax,accelerating the gradual replacement of fees with taxes,and introducing legislation on environmental protection taxes.

Feasibility study for SOFC-GT hybrid locomotive power: Part I. Development of a dynamic 3.5 MW SOFC-GT FORTRAN model

Science.gov (United States)

Martinez, Andrew S.; Brouwer, Jacob; Samuelsen, G. Scott

2012-09-01

This work presents the development of a dynamic SOFC-GT hybrid system model applied to a long-haul freight locomotive in operation. Given the expectations of the rail industry, the model is used to develop a preliminary analysis of the proposed system's operational capability on conventional diesel fuel as well as natural gas and hydrogen as potential fuels in the future. It is found that operation of the system on all three of these fuels is feasible with favorable efficiencies and reasonable dynamic response. The use of diesel fuel reformate in the SOFC presents a challenge to the electrochemistry, especially as it relates to control and optimization of the fuel utilization in the anode compartment. This is found to arise from the large amount of carbon monoxide in diesel reformate that is fed to the fuel cell, limiting the maximum fuel utilization possible. This presents an opportunity for further investigations into carbon monoxide electrochemical oxidation and/or system integration studies where the efficiency of the fuel reformer can be balanced against the needs of the SOFC.

Kinetic Study of Nonequilibrium Plasma-Assisted Methane Steam Reforming

Directory of Open Access Journals (Sweden)

Hongtao Zheng

2014-01-01

Full Text Available To develop a detailed reaction mechanism for plasma-assisted methane steam reforming, a comprehensive numerical and experimental study of effect laws on methane conversion and products yield is performed at different steam to methane molar ratio (S/C, residence time s, and reaction temperatures. A CHEMKIN-PRO software with sensitivity analysis module and path flux analysis module was used for simulations. A set of comparisons show that the developed reaction mechanism can accurately predict methane conversion and the trend of products yield in different operating conditions. Using the developed reaction mechanism in plasma-assisted kinetic model, the reaction path flux analysis was carried out. The result shows that CH3 recombination is the limiting reaction for CO production and O is the critical species for CO production. Adding 40 wt.% Ni/SiO2 in discharge region has significantly promoted the yield of H2, CO, or CO2 in dielectric packed bed (DPB reactor. Plasma catalytic hybrid reforming experiment verifies the reaction path flux analysis tentatively.

A case study of different configurations for the performance analysis of solid oxide fuel cells with external reformers

International Nuclear Information System (INIS)

Lee, Kang Hun; Woo, Hyun Tak; Yu, Sang Seok; Lee, Sang Min; Lee, Young Duk; Kang, Sang Gyu; Ahn, Kook Young

2012-01-01

A planar solid oxide fuel cell (PSOFC) is studied in its application in a high temperature stationary power plant. Even though PSOFCs with external reformers are designed for application from the distributed power source to the central power plant, such PSOFCs may sacrifice more system efficiency than internally reformed SOFCs. In this study, modeling of the PSOFC with an external reformer was developed to analyze the feasibility of thermal energy utilization for the external reformer. The PSOFC system model includes the stack, reformer, burner, heat exchanger, blower, pump, PID controller, 3-way valve, reactor, mixer, and steam separator. The model was developed under the Matlab/Simulink environment with Thermolib'R'modules. The model was used to study the system performance according to its configuration. Three configurations of the SOFC system were selected for the comparison of the system performance. The system configuration considered the cathode recirculation, thermal sources for the external reformer, heat up of operating gases, and condensate anode off gas for the enhancement of the fuel concentration. The simulation results show that the magnitude of the electric efficiency of the PSOFC system for Case 2 is 12.13% higher than that for Case 1 (reference case), and the thermal efficiency of the PSOFC system for Case 3 is 76.12%, which is the highest of all the cases investigated

Who defines the need for fishery reform?

DEFF Research Database (Denmark)

Jacobsen, Rikke Becker; Raakjær, Jesper

2014-01-01

-making process as reform according to this ‘grand reform’ discourse was blocked by a combination of small-scale fishers’ informal networks and the power of the parliamentary majority. After a parliamentary shift in power the new government implemented the ‘grand reform’ gradually whilst new patterns...... of participation and exclusion emerged. In this process, the identities of the participating participants were reinterpreted to fit the new patterns of influence and participation. The article argues that fishery reform does not necessarily start with the collective recognition of a problem in marine resource use...... and a power-neutral process of institutional learning. Instead, it argues that fishery reform is likely to be the ‘reform of somebody’ and that this ‘somebody’ is itself a changing identity....

Developing an energy efficient steam reforming process to produce hydrogen from sulfur-containing fuels

Science.gov (United States)

Simson, Amanda

Hydrogen powered fuel cells have the potential to produce electricity with higher efficiency and lower emissions than conventional combustion technology. In order to realize the benefits of a hydrogen fuel cell an efficient method to produce hydrogen is needed. Currently, over 90% of hydrogen is produced from the steam reforming of natural gas. However, for many applications including fuel cell vehicles, the use of a liquid fuel rather than natural gas is desirable. This work investigates the feasibility of producing hydrogen efficiently by steam reforming E85 (85% ethanol/15% gasoline), a commercially available sulfur-containing transportation fuel. A Rh-Pt/SiO2-ZrO2 catalyst has demonstrated good activity for the E85 steam reforming reaction. An industrial steam reforming process is often run less efficiently, with more water and at higher temperatures, in order to prevent catalyst deactivation. Therefore, it is desirable to develop a process that can operate without catalyst deactivation at more energy efficient conditions. In this study, the steam reforming of a sulfur-containing fuel (E85) was studied at near stoichiometric steam/carbon ratios and at 650C, conditions at which catalyst deactivation is normally measured. At these conditions the catalyst was found to be stable steam reforming a sulfur-free E85. However, the addition of low concentrations of sulfur significantly deactivated the catalyst. The presence of sulfur in the fuel caused catalyst deactivation by promoting ethylene which generates surface carbon species (coke) that mask catalytic sites. The amount of coke increased during time on stream and became increasingly graphitic. However, the deactivation due to both sulfur adsorption and coke formation was reversible with air treatment at 650°C. However, regenerations were found to reduce the catalyst life. Air regenerations produce exotherms on the catalyst surface that cause structural changes to the catalyst. During regenerations the

Effect of auxotrophies on yeast performance in aerated fed-batch reactor

Energy Technology Data Exchange (ETDEWEB)

Landi, Carmine; Paciello, Lucia [Dept. Ingegneria Industriale, Universita di Salerno, Via Ponte Don Melillo, 84084 Fisciano, Salerno (Italy); Alteriis, Elisabetta de [Dept. Biologia Strutturale e Funzionale, Universita degli Studi di Napoli ' Federico II' , Via Cinthia, 80100 Napoli (Italy); Brambilla, Luca [Dept. Biotecnologie e Bioscienze, Universita Milano-Bicocca, Piazza della Scienza, 20126 Milano (Italy); Parascandola, Palma, E-mail: pparascandola@unisa.it [Dept. Ingegneria Industriale, Universita di Salerno, Via Ponte Don Melillo, 84084 Fisciano, Salerno (Italy)

2011-10-28

Highlights: Black-Right-Pointing-Pointer The paper contributes to fill the gap existing between the basic and applied research. Black-Right-Pointing-Pointer Mathematical model sheds light on the physiology of auxotrophic yeast strains. Black-Right-Pointing-Pointer Yeast behavior in fed-batch is influenced by biological and environmental determinants. Black-Right-Pointing-Pointer Process optimization would make possible the production of heterologous proteins which are not yet on the market. -- Abstract: A systematic investigation on the effects of auxotrophies on the performance of yeast in aerated fed-batch reactor was carried out. Six isogenic strains from the CEN.PK family of Saccharomyces cerevisiae, one prototroph and five auxotrophs, were grown in aerated fed-batch reactor using the same operative conditions and a proper nutritional supplementation. The performance of the strains, in terms of final biomass decreased with increasing the number of auxotrophies. Auxotrophy for leucine exerted a profound negative effect on the performance of the strains. Accumulation of reactive oxygen species (ROS) in the cells of the strain carrying four auxotrophies and its significant viability loss, were indicative of an oxidative stress response induced by exposure of cells to the environmental conditions. The mathematical model was fundamental to highlight how the carbon flux, depending on the number and type of auxotrophies, was diverted towards the production of increasingly large quantities of energy for maintenance.

Effect of auxotrophies on yeast performance in aerated fed-batch reactor

International Nuclear Information System (INIS)

Landi, Carmine; Paciello, Lucia; Alteriis, Elisabetta de; Brambilla, Luca; Parascandola, Palma

2011-01-01

Highlights: ► The paper contributes to fill the gap existing between the basic and applied research. ► Mathematical model sheds light on the physiology of auxotrophic yeast strains. ► Yeast behavior in fed-batch is influenced by biological and environmental determinants. ► Process optimization would make possible the production of heterologous proteins which are not yet on the market. -- Abstract: A systematic investigation on the effects of auxotrophies on the performance of yeast in aerated fed-batch reactor was carried out. Six isogenic strains from the CEN.PK family of Saccharomyces cerevisiae, one prototroph and five auxotrophs, were grown in aerated fed-batch reactor using the same operative conditions and a proper nutritional supplementation. The performance of the strains, in terms of final biomass decreased with increasing the number of auxotrophies. Auxotrophy for leucine exerted a profound negative effect on the performance of the strains. Accumulation of reactive oxygen species (ROS) in the cells of the strain carrying four auxotrophies and its significant viability loss, were indicative of an oxidative stress response induced by exposure of cells to the environmental conditions. The mathematical model was fundamental to highlight how the carbon flux, depending on the number and type of auxotrophies, was diverted towards the production of increasingly large quantities of energy for maintenance.

MEMS-Based Fuel Reformer with Suspended Membrane Structure

Science.gov (United States)

Chang, Kuei-Sung; Tanaka, Shuji; Esashi, Masayoshi

We report a MEMS-based fuel reformer for supplying hydrogen to micro-fuel cells for portable applications. A combustor and a reforming chamber are fabricated at either side of a suspended membrane structure. This design is used to improve the overall thermal efficiency, which is a critical issue to realize a micro-fuel reformer. The suspended membrane structure design provided good thermal isolation. The micro-heaters consumed 0.97W to maintain the reaction zone of the MEMS-based fuel reformer at 200°C, but further power saving is necessary by improving design and fabrication. The conversion rate of methanol to hydrogen was about 19% at 180°C by using evaporated copper as a reforming catalyst. The catalytic combustion of hydrogen started without any assistance of micro-heaters. By feeding the fuel mixture of an equivalence ratio of 0.35, the temperature of the suspended membrane structure was maintained stable at 100°C with a combustion efficiency of 30%. In future works, we will test a micro-fuel reformer by using a micro-combustor to supply heat.

Liquid hydrogen production via hydrogen sulfide methane reformation

Energy Technology Data Exchange (ETDEWEB)

Huang, Cunping; T-Raissi, Ali [University of Central Florida, Florida Solar Energy Center, 1769 Clearlake Road, Cocoa, FL 32922 (United States)

2008-01-03

Hydrogen sulfide (H{sub 2}S) methane (CH{sub 4}) reformation (H{sub 2}SMR) (2H{sub 2}S + CH{sub 4} = CS{sub 2} + 4H{sub 2}) is a potentially viable process for the removal of H{sub 2}S from sour natural gas resources or other methane containing gases. Unlike steam methane reformation that generates carbon dioxide as a by-product, H{sub 2}SMR produces carbon disulfide (CS{sub 2}), a liquid under ambient temperature and pressure - a commodity chemical that is also a feedstock for the synthesis of sulfuric acid. Pinch point analyses for H{sub 2}SMR were conducted to determine the reaction conditions necessary for no carbon lay down to occur. Calculations showed that to prevent solid carbon formation, low inlet CH{sub 4} to H{sub 2}S ratios are needed. In this paper, we analyze H{sub 2}SMR with either a cryogenic process or a membrane separation operation for production of either liquid or gaseous hydrogen. Of the three H{sub 2}SMR hydrogen production flowsheets analyzed, direct liquid hydrogen generation has higher first and second law efficiencies of exceeding 80% and 50%, respectively. (author)

Interest Groups and Trade Reform in Mexico

OpenAIRE

Luis Sanchez-Mier

2005-01-01

Mexico experienced widespread economic reform in the last two decades. From being a protectionist economy with a policy of import substitution, it has turned into an export-oriented open economy. Why was protectionism a stable policy, and how was it overturned by a reform that went against entrenched interests? I apply a game theoretic model of political influence and economic reform to answer these questions using data to calculate the payoffs for the relevant interest groups. In the underly...

Improving the Business Trade Licensing Reform Environment

OpenAIRE

Gamser, Matthew

2003-01-01

This case study of Kenyan business trade licensing shows that red-tape costs can be cut if reform is championed strongly and there is a strong case in terms of costs and benefits. The reform of business registration, trade licensing and other business entry procedures is a cost effective and progressive way to promote indigenous private sector development. But, reform needs more than good cost-benefit analysis and legal drafting; it also requires building constituencies and continuous advocacy.

Optimal mode of operation for biomass production

NARCIS (Netherlands)

Betlem, Ben H.L.; Roffel, Brian; Mulder, P.

2002-01-01

The rate of biomass production is optimised for a predefined feed exhaustion using the residue ratio as a degree of freedom. Three modes of operation are considered: continuous, repeated batch, and repeated fed-batch operation. By means of the Production Curve, the transition points of the optimal

Reforms and Economic Growth in Transition Economies: Complementarity, Sequencing and Speed

Directory of Open Access Journals (Sweden)

Karsten Staehr

2005-12-01

Full Text Available This paper considers the effects of sequencing and reform speed on output performance in transition countries. These largely unsettled issues are addressed using principal component techniques to construct reform clusters and by explicit tests of speed effects. The results indicate that broad-based reforms are good for output growth, but so is a policy of liberalisation and small-scale privatisation without structural reforms. Conversely, large-scale privatisation without adjoining reforms, market opening without supporting reforms and bank liberalisation without enterprise restructuring affect growth negatively. Swift reform policies allow transition countries to benefit from higher growth for longer time. The speed of reforms appears otherwise to have little effect on growth in the short and medium term.

Misrecognition and science education reform

Science.gov (United States)

Brandt, Carol B.

2012-09-01

In this forum, I expand upon Teo and Osborne's discussion of teacher agency and curriculum reform. I take up and build upon their analysis to further examine one teacher's frustration in enacting an inquiry-based curriculum and his resulting accommodation of an AP curriculum. In this way I introduce the concept of misrecognition (Bourdieu and Passeron 1977) to open up new ways of thinking about science inquiry and school reform.

Testicular damage in rats fed on irradiated diets

International Nuclear Information System (INIS)

Kushwaha, A.K.S.; Hasan, S.S.

1986-01-01

Feeding effect of irradiated diets was studied on the pups born to mother fed either on irradiated normal diet or irradiated low protein diet. The study indicated that pups born to mother fed on the irradiated low protein diet had fewer spermatogonial cells in the testes than those given irradiated normal diet and unirradiated low protein diet. Similarly, pups maintained on the irradiated low protein diet showed marked decrease in alkaline phosphatase and cholesterol contents in the testes rather than in the pups fed irradiated normal as well as unirradiated low protein diets. The irradiated low protein diet fed pups showed increased depletion and vacuolization of adrenocortical and medullary cells. 13 refs., 15 figures. (author)

Testicular damage in rats fed on irradiated diets

Energy Technology Data Exchange (ETDEWEB)

Kushwaha, A K.S.; Hasan, S S

1986-12-01

Feeding effect of irradiated diets was studied on the pups born to mother fed either on irradiated normal diet or irradiated low protein diet. The study indicated that pups born to mother fed on the irradiated low protein diet had fewer spermatogonial cells in the testes than those given irradiated normal diet and unirradiated low protein diet. Similarly, pups maintained on the irradiated low protein diet showed marked decrease in alkaline phosphatase and cholesterol contents in the testes rather than in the pups fed irradiated normal as well as unirradiated low protein diets. The irradiated low protein diet fed pups showed increased depletion and vacuolization of adrenocortical and medullary cells. 13 refs., 15 figures.

Recommended Capacities for Educational Leadership: Pre-Reform Era Scholars versus Reform-Era Scholars versus National Standards

Science.gov (United States)

Gordon, Stephen P.; Taylor-Backor, Karen; Croteau, Susan

2017-01-01

We reviewed the scholarship on capacities for educational leadership for the past decade of the pre-reform era (1976-1985), as well as a recent decade of the reform era (2005-2015), and compared scholarship from both decades with the current Professional Standards for Educational Leaders. We found that scholars in the past decade of the pre-reform…

Massachusetts health reform: employer coverage from employees' perspective.

Science.gov (United States)

Long, Sharon K; Stockley, Karen

2009-01-01

The national health reform debate continues to draw on Massachusetts' 2006 reform initiative, with a focus on sustaining employer-sponsored insurance. This study provides an update on employers' responses under health reform in fall 2008, using data from surveys of working-age adults. Results show that concerns about employers' dropping coverage or scaling back benefits under health reform have not been realized. Access to employer coverage has increased, as has the scope and quality of their coverage as assessed by workers. However, premiums and out-of-pocket costs have become more of an issue for employees in small firms.

Membrane steam reforming of natural gas for hydrogen production by utilization of medium temperature nuclear reactor

International Nuclear Information System (INIS)

Djati Hoesen Salimy

2010-01-01

The assessment of steam reforming process with membrane reactor for hydrogen production by utilizing of medium temperature nuclear reactor has been carried out. Difference with the conventional process of natural gas steam reforming that operates at high temperature (800-1000°C), the process with membrane reactor operates at lower temperature (~500°C). This condition is possible because the use of perm-selective membrane that separate product simultaneously in reactor, drive the optimum conversion at the lower temperature. Besides that, membrane reactor also acts the role of separation unit, so the plant will be more compact. From the point of nuclear heat utilization, the low temperature of process opens the chance of medium temperature nuclear reactor utilization as heat source. Couple the medium temperature nuclear reactor with the process give the advantage from the point of saving fossil fuel that give direct implication of decreasing green house gas emission. (author)

Implementing Reform: Teachers' Beliefs about Students and the Curriculum

Science.gov (United States)

Bartiromo, Tara; Etkina, Eugenia

2009-11-01

This paper presents findings on how consistent teachers' perceptions of their students, their own role in the classroom, and the reformed curriculum are with the actual implementation of the reformed curriculum in the classroom. This study shows that the five participating teachers were consistent with their perceptions and their actual behavior in the classroom. The teachers who were engaged in designing the curriculum demonstrated consistent reformed teaching views and behaviors. The degree to which the teachers viewed the curriculum as useful to them and their students was an indicator of how reformed their teaching was as measured by the Reformed Teaching Observation Protocol (RTOP) [1][2]. Finally, it was determined that faithful implementation of a curriculum can mean faithfully implementing the theoretical foundation of the curriculum materials during instruction instead of implementing every component or lesson of the reformed curriculum.

The Economic Effects of Comprehensive Tax Reform

National Research Council Canada - National Science Library

1997-01-01

.... This Congressional Budget Office (CBO) study analyzes the major economic effects of several tax reform plans and finds that much uncertainty surrounds the likelihood and magnitude of the economic gains from tax reform...

Teaching Model Innovation of Production Operation Management Engaging in ERP Sandbox Simulation

Directory of Open Access Journals (Sweden)

Tinggui Chen

2014-05-01

Full Text Available In light of the course of production operation management status, this article proposes the innovation and reform of the teaching model from three aspects of from the curriculum syllabus reform, the simulation of typical teaching organization model, and the enterprise resource process (ERP sandbox application in the course practice. There are an exhaustive implementation procedure and a further discussion on the promotion outcome. The results indicate that the innovation of teaching model and case studying practice in production operation management based on ERP sandbox simulation is feasible.

The Reform of Qatar University. Monograph

Science.gov (United States)

Moini, Joy S.; Bikson, Tora K.; Neu, C. Richard; DeSisto, Laura

2009-01-01

In 2003, the State of Qatar engaged the RAND-Qatar Policy Institute to assist Qatar University, the nation's first and only public higher education institution, with reform of its major administrative and academic structures, policies, and practices. This monograph summarizes that reform effort, which formally lasted from October 2003 through…

Reforming Pensions in Europe: Economic Fundamentals and Political Factors

OpenAIRE

Ondřej Schneider

2009-01-01

This paper analyzes pension reforms in Europe and their determinants. As pension reforms are intrinsically difficult to define and pinpoint, we introduce an alternative measure of pension reforms by comparing long-term forecasts of pension expenditures for seventeen European countries. The larger the decrease in expected spending on public pensions in 2050 between two base years, the more successful a pension reform the country achieved (after controlling for other factors, such as demography...

International Aspects of Social Reform in the Interwar Period

OpenAIRE

Douglas Galbi

2004-01-01

The reconstruction of the international order after World War I put great emphasis on social reforms through the International Labor Organization (ILO). Three types of arguments were used to promote social reform. The first asserted that international economic competition meant that social reform had to be coordinated internationally in order to maintain the relative competitiveness of countries. The second proposed that social reform was necessary to preserve the stability of states, and hen...

The English and Swedish health care reforms.

Science.gov (United States)

Glennerster, H; Matsaganis, M

1994-01-01

England and Sweden have two of the most advanced systems of universal access to health care in the world. Both have begun major reforms based on similar principles. Universal access and finance from taxation are retained, but a measure of competition between providers of health care is introduced. The reforms therefore show a movement toward the kind of approach advocated by some in the United States. This article traces the origins and early results of the two countries' reform efforts.

Purifier-integrated methanol reformer for fuel cell vehicles

Science.gov (United States)

Han, Jaesung; Kim, Il-soo; Choi, Keun-Sup

We developed a compact, 3-kW, purifier-integrated modular reformer which becomes the building block of full-scale 30-kW or 50-kW methanol fuel processors for fuel cell vehicles. Our proprietary technologies regarding hydrogen purification by composite metal membrane and catalytic combustion by washcoated wire-mesh catalyst were combined with the conventional methanol steam-reforming technology, resulting in higher conversion, excellent quality of product hydrogen, and better thermal efficiency than any other systems using preferential oxidation. In this system, steam reforming, hydrogen purification, and catalytic combustion all take place in a single reactor so that the whole system is compact and easy to operate. Hydrogen from the module is ultrahigh pure (99.9999% or better), hence there is no power degradation of PEMFC stack due to contamination by CO. Also, since only pure hydrogen is supplied to the anode of the PEMFC stack, 100% hydrogen utilization is possible in the stack. The module produces 2.3 Nm 3/h of hydrogen, which is equivalent to 3 kW when PEMFC has 43% efficiency. Thermal efficiency (HHV of product H 2/HHV of MeOH in) of the module is 89% and the power density of the module is 0.77 kW/l. This work was conducted in cooperation with Hyundai Motor Company in the form of a Korean national project. Currently the module is under test with an actual fuel cell stack in order to verify its performance. Sooner or later a full-scale 30-kW system will be constructed by connecting these modules in series and parallel and will serve as the fuel processor for the Korean first fuel cell hybrid vehicle.

The Brazilian electrical system reform

International Nuclear Information System (INIS)

Mendonca, A.F.; Dahl, C.

1999-01-01

Although the Brazilian electrical system has been a public monopoly, the threat of electricity shortages from a lack of investment triggered a comprehensive reform. In 1993 the government began a series of laws, decrees and regulations reforming the tariff policy, allowing privatization of utilities, foreign investments and independent power producers, and creating an independent transmission grid and a new electricity regulatory agency (ANEEL). The new regulatory framework is not completely defined but the proposed model intends to transform bulk electricity supply into a competitive market similar to that adopted in England. Our objective is to evaluate whether the proposed reform will succeed in attracting the required private capital, will allow an unregulated wholesale electricity market and will require a strict regulatory framework. The reform has been quite successful in privatizing the distribution companies but is allowing monopolistic rents, and has failed until now to attract private investments to expand generation capacity. The risk of blackouts has increased, and the proposed wholesale electricity market may not be appropriate because of barriers to constructing new hydroelectric units, now 90% of the system. Therefore, a new regulatory framework and a strong regulatory agency with a well-defined tariff policy should have preceded the privatization. (author)

Reforming process. Reformierungsverfahren

Energy Technology Data Exchange (ETDEWEB)

McCoy, C.S.

1982-05-19

A naphta fraction is subjected to a catalytic reforming process in several series-connected reactors. The first reactor is equipped with a moving catalyst bed containing not more the 30% of volume of the total catalyst amount. The other reactors are designed as packed-bed systems. The content of coke deposited on the catalyst of the first reactor owing to the reforming process is maintained at below 1% of weight. This is effected by periodic removal of a proportion of the contaminated catalyst from the bottom part of the bed, by its regeneration and re-feeding to the top part of the bed. This results in prolonged service life of the catalyst and simultaneous improvement of the anti-knock value of the product.

Fostering Home-Grown Democratic Reform | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

To support the political and governance-related processes taking place, the Arab Reform Initiative ... In the summer of 2012, several papers were commissioned on Egypt's constitutional reform looking at specific issues such ... Related articles ...

Flicker Mitigation Strategy for a Doubly Fed Induction Generator by Torque Control

DEFF Research Database (Denmark)

Zhang, Yunqian; Hu, Weihao; Chen, Zhe

2014-01-01

induction generator is presented to investigate the flicker mitigation. Taking advantage of the large inertia of the wind turbine rotor, a generator torque control (GTC) strategy is proposed, so that the power oscillation is stored as the kinetic energy of the wind turbine rotor, thus the flicker emission...... is an effective means for flicker mitigation of variable speed wind turbines during continuous operation.......Owing to the rotational sampling of turbulence, wind shear and tower shadow effects grid connected variable speed wind turbines could lead to the power fluctuations which may produce flicker during continuous operation. A model of an megawatt (MW)-level variable speed wind turbine with a doubly fed...

Operation planning device

International Nuclear Information System (INIS)

Watanabe, Takashi; Odakawa, Naoto; Erikuchi, Makoto; Okada, Masayuki; Koizumi, Atsuhiko.

1996-01-01

The device of the present invention provides a device suitable for monitoring a reactor core state and operation replanning in terms of reactor operation. Namely, (1) an operation result difference judging means judges that replanning is necessary when the operation results deviates from the operation planning, (2) an operation replanning rule data base storing means stores a deviation key which shows various kinds of states where the results deviate from the planning and a rule for replanning for returning to the operation planning on every deviating key, (3) an operation replanning means forms a new operation planning in accordance with the rule which is retrieved based on the deviation key, (4) an operation planning optimizing rule data base storing means evaluates the reformed planning and stores it on every evaluation item, (5) an operation planning optimization means correct the operation planning data so as to be optimized when the evaluation of the means (4) is less than a reference value, and (6) an operation planning display means edits adaptable operation planning data and the result of the evaluation and displays them. (I.S.)

FED, Geometry Input Generator for Program TRUMP

International Nuclear Information System (INIS)

Schauer, D.A.; Elrod, D.C.

1996-01-01

1 - Description of program or function: FED reduces the effort required to obtain the necessary geometric input for problems which are to be solved using the heat-transfer code, TRUMP (NESC 771). TRUMP calculates transient and steady-state temperature distributions in multidimensional systems. FED can properly zone any body of revolution in one, or three dimensions. 2 - Method of solution: The region of interest must first be divided into areas which may consist of a common material. The boundaries of these areas are the required FED input. Each area is subdivided into volume nodes, and the geometrical properties are calculated. Finally, FED connects the adjacent nodes to one another, using the proper surface area, interface distance, and, if specified, radiation form factor and interface conductance. 3 - Restrictions on the complexity of the problem: Rectangular bodies can only be approximated by using a very large radius of revolution compared to the total radial thickness and by considering only a small angular segment in the circumferential direction

76 FR 30869 - Promoting Transmission Investment Through Pricing Reform

Science.gov (United States)

2011-05-27

...] Promoting Transmission Investment Through Pricing Reform May 19, 2011. AGENCY: Federal Energy Regulatory... varied. \\1\\ Promoting Transmission Investment through Pricing Reform, Order No. 679, 71 FR 43294 (Jul. 31... issued Order No. 679, Promoting Transmission Investment through Pricing Reform, which was further refined...

Implications of Lessons Learned From Tobacco Control for Tanning Bed Reform

Science.gov (United States)

Sinclair, Craig

2013-01-01

Tanning beds used according to the manufacturer’s instructions expose the user to health risks, including melanoma and other skin cancers. Applying the MPOWER model (monitor, protect, offer alternatives, warn, enforce, and raise taxes), which has been used in tobacco control, to tanning bed reform could reduce the number of people at risk of diseases associated with tanning bed use. Among the tactics available to government are restricting the use of tanning beds by people under age 18 and those with fair skin, increasing the price of tanning bed services through taxation, licensing tanning bed operators, and banning unsupervised tanning bed operations. PMID:23449282

The British parliament: An effort towards the constitutional reform

Directory of Open Access Journals (Sweden)

Pejić Irena

2015-01-01

Full Text Available The British Parliament is the eldest representative assembly which inspired the development of most European parliamentary systems. This institution provides a framework for the Westminster model of democracy. The Parliament structure is based on bicameralism, including two chambers: the House of Commons and the House of Lords. The two-chamber structure is an integral part of the British parliamentary system. During the last century, many reforms took place regarding the modernization of Parliament. Thus, the number of members of the House of Lord has been reduced in order to ensure more efficiency in the working procedures. However, the House of Commons is still 'the dominant House' given its capacity to recruit a political majority which is eligible to control the Cabinet. During the 20th century, several waves of reforms engulfed the traditional English parliamentarism and its 'unwritten' constitution. Although the reforms have yielded some results, they have not yet produced a constitution in the formal sense. The partially reformed Parliament has not lost the traditional supremacy it was initially vested under the original postulates of the parliamentary sovereignty doctrine. The great constitutional reform in the UK, initiated in 1997, has encompassed not only Parliament but also a vast array of other areas ranging from the state power organization to human rights. In this process, the British Parliament should exercise a dual function: as a subject of reform ('reformer', as well as an object of reform ('the reformed'. Undoubtedly, the United Kingdom has been facing one of the largest waves of constitutional reforms in its long history, which will sooner or later lead to a constitutional codification in the state whose system is still predominantly based on the historical and 'unwritten' constitution.

China's health care system reform: Progress and prospects.

Science.gov (United States)

Li, Ling; Fu, Hongqiao

2017-07-01

This paper discusses the progress and prospects of China's complex health care reform beginning in 2009. The Chinese government's undertaking of systemic reform has achieved laudable achievements, including the expansion of social health insurance, the reform of public hospitals, and the strengthening of primary care. An innovative policy tool in China, policy experimentation under hierarchy, played an important role in facilitating these achievements. However, China still faces gaps and challenges in creating a single payer system, restructuring the public hospitals, and establishing an integrated delivery system. Recently, China issued the 13th 5-year plan for medical reform, setting forth the goals, policy priorities, and strategies for health reform in the following 5 years. Moreover, the Chinese government announced the "Healthy China 2030" blueprint in October 2016, which has the goals of providing universal health security for all citizens by 2030. By examining these policy priorities against the existing gaps and challenges, we conclude that China's health care reform is heading in the right direction. To effectively implement these policies, we recommend that China should take advantage of policy experimentation to mobilize bottom-up initiatives and encourage innovations. Copyright © 2017 John Wiley & Sons, Ltd.

Hydrogen production by enhanced-sorption chemical looping steam reforming of glycerol in moving-bed reactors

International Nuclear Information System (INIS)

Dou, Binlin; Song, Yongchen; Wang, Chao; Chen, Haisheng; Yang, Mingjun; Xu, Yujie

2014-01-01

Highlights: • New approach on continuous high-purity H 2 produced auto-thermally with long time. • Low-cost NiO/NiAl 2 O 4 exhibited high redox performance to H 2 from glycerol. • Oxidation, steam reforming, WSG and CO 2 capture were combined into a reactor. • H 2 purity of above 90% was produced without heating at 1.5–3.0 S/C and 500–600 °C. • Sorbent regeneration and catalyst oxidization achieved simultaneously in a reactor. - Abstract: The continuous high-purity hydrogen production by the enhanced-sorption chemical looping steam reforming of glycerol based on redox reactions integrated with in situ CO 2 removal has been experimentally studied. The process was carried out by a flow of catalyst and sorbent mixture using two moving-bed reactors. Various unit operations including oxidation, steam reforming, water gas shrift reaction and CO 2 removal were combined into a single reactor for hydrogen production in an overall economic and efficient process. The low-cost NiO/NiAl 2 O 4 catalyst efficiently converted glycerol and steam to H 2 by redox reactions and the CO 2 produced in the process was simultaneously removed by CaO sorbent. The best results with an enriched hydrogen product of above 90% in auto-thermal operation for reforming reactor were achieved at initial temperatures of 500–600 °C and ratios of steam to carbon (S/C) of 1.5–3.0. The results indicated also that not all of NiO in the catalyst can be reduced to Ni by the reaction with glycerol, and the reduced Ni can be oxidized to NiO by air at 900 °C. The catalyst oxidization and sorbent regeneration were achieved under the same conditions in air reactor

Operations and quality management for public service delivery improvement.

Directory of Open Access Journals (Sweden)

Paulin Mbecke

2014-10-01

Full Text Available Public service management reforms have not yet contributed to poverty eradication and generally socio-economic development of many African countries. The reforms suggested and implemented to date still prove to be weak in addressing the many challenges faced by the public service in delivering goods and services to the population. The failure of the current public service management calls for a consideration of business-driven approaches and practices that facilitate effectiveness, efficiency, competitiveness and flexibility in goods and services provision. The critical social theory methodology and the literature review technique described and raised awareness on service delivery chaos in South Africa. A public service reform that focuses on operations and quality management is one of the ways of improving and sustaining service delivery in South Africa. Operations management is an essential tool for the planning, execution, control, monitoring and evaluation of production processes. Quality management, in the other hand, is essential to ensure best quality of goods and services produced by the public service within acceptable time and available resources to meet or exceed people’s expectations. The operations and quality management framework proposed in this article is a potential alternative to the current service delivery crisis in South Africa.

Reform of teacher education and teacher educator competences

DEFF Research Database (Denmark)

Rasmussen, Jens

Despite it is well known known and recognized that teacher educators’ competences play a decisive role for the education of new teachers and also for the quality of the profession as such very little research is conducted on the competences of teacher educators and their training. It is also...... an established fact that the implementation of teacher education reforms to a large extent stands and falls with the competences of the teacher educators. Not least it is of importance that teacher educators possess the kind of competences that are needed to meet the intentions of a reform. Failing teacher...... educator competences might just as well be an explanation for frequent reforms in teacher education as it can be failure of the reforms themselves. Danish teacher education was in 2012 reformed for the third time in only fifteen years, but teacher educator competences were not mapped at all during...

Making contracting work better and cost less: Report of the Contract Reform Team

Energy Technology Data Exchange (ETDEWEB)

1994-02-01

In June 1993, Secretary of Energy Hazel O`Leary formed a Contract Reform Team, chaired by Deputy Secretary Bill White, to evaluate the contracting practices of the Department of Energy and to formulate specific proposals for improving those practices. This report summarizes the results of the work of the Contract Reform Team. It recommends actions for implementation that will significantly improve the Department`s contracting practices and will enable the Department to help create a government that -- in the words of Vice President Gore -- {open_quotes}works better and costs less.{close_quotes} These actions and the deadlines for their implementation are listed. Among other things, they recommend replacing the Department`s standard Management and Operating Contract with a new Performance-Based Management Contract and strengthening the Department`s systems for selecting and managing contractors.

Steam Reformer With Fibrous Catalytic Combustor

Science.gov (United States)

Voecks, Gerald E.

1987-01-01

Proposed steam-reforming reactor derives heat from internal combustion on fibrous catalyst. Supplies of fuel and air to combustor controlled to meet demand for heat for steam-reforming reaction. Enables use of less expensive reactor-tube material by limiting temperature to value safe for material yet not so low as to reduce reactor efficiency.

Relatorio: Reforma universitaria (Report: University Reform).

Science.gov (United States)

Ministerio da Educacao e Cultura, Rio de Janeiro (Brazil).

This document is an English-language abstract (approximately 1,500 words) of a report by 11 experts invited by the Ministry of Education and Culture to give their views on Brazilian university reforms. The introduction to the report states the principles underlying the proposals for reform adapted to the current social transformation in Brazil.…

Neural network based control of Doubly Fed Induction Generator in wind power generation

Science.gov (United States)

Barbade, Swati A.; Kasliwal, Prabha

2012-07-01

To complement the other types of pollution-free generation wind energy is a viable option. Previously wind turbines were operated at constant speed. The evolution of technology related to wind systems industry leaded to the development of a generation of variable speed wind turbines that present many advantages compared to the fixed speed wind turbines. In this paper the phasor model of DFIG is used. This paper presents a study of a doubly fed induction generator driven by a wind turbine connected to the grid, and controlled by artificial neural network ANN controller. The behaviour of the system is shown with PI control, and then as controlled by ANN. The effectiveness of the artificial neural network controller is compared to that of a PI controller. The SIMULINK/MATLAB simulation for Doubly Fed Induction Generator and corresponding results and waveforms are displayed.

Bifurcation behavior during the hydrogen production in two compatible configurations of a novel circulating fluidized bed membrane reformer

International Nuclear Information System (INIS)

Chen, Z.; Elnashaie, S.S.

2004-01-01

'Full text:' Multiplicity of steady states (Static Bifurcation Behavior, SBB) in a novel Circulating Fluidized Bed (CFB) membrane reformer for the efficient production of hydrogen by steam reforming of heptane (model component of heavy hydrocarbons and renewable bio-oils) is investigated. The present paper highlights the practical implications of this phenomenon on the behavior of this novel reformer with special focusing on hydrogen production. Two configurations are considered and compared. One is with the catalyst regeneration before the gas-solid separation and the other one is with the catalyst regeneration after the gas-solid separation. Multiplicity of the steady states prevails over a number of design and operating parameters with important impact on the reformer performance. The basis of process evaluation is focused on the net hydrogen production. The dependence of the behavior of this autothermal CFB is shown to be quite complex and defy the simple logic of non-autothermal processes. The unit can be a very efficient hydrogen producer provided its bifurcation behavior is well understood and correctly exploited. (author)

Russian electricity reform. Emerging challenges and opportunities

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

The Russian Government is pursuing a strategy of very high economic growth, with the objective of doubling gross domestic product in ten years. It recognises the central role the electricity sector has to play to achieve this target and has embarked on a highly ambitious program of electricity reform. If it is to succeed, the reform program will have to create market structures, market rules and a regulatory framework that will foster competitive wholesale and retail electricity markets. At the same time, it will have to deal with sensitive social issues related to tariff rebalancing and the removal of cross subsidies. Only competitive markets based on transparent prices that reflect costs can deliver the efficient, reliable and internationally competitive performance needed to meet the government's economic targets. Such markets are essential to attract new investment that will be required to ensure security of electricity supply after 2010. This book focuses on key aspects of the proposed reform that could have an important bearing on its success. It also raises concerns as to the pace of reform in related areas, such as the need for complementary reforms in the Russian natural gas sector. The IEA commends the Russian Government on its efforts to embrace this electricity reform - a key element critical to meeting the challenges ahead in terms of its economic growth and energy security. 17 figs., 10 tabs., 3 maps.

Analytical study on carbon dioxide reforming of natural gas

International Nuclear Information System (INIS)

Ohashi, Hirofumi; Sakaki, Akihiro; Inagaki, Yoshiyuki

2001-01-01

In recent years, considerable attention has been paid to carbon dioxide reforming of natural gas, namely CO 2 reforming, since it can produce synthesis gas with low hydrogen-to-carbon ratio preferentially used for production of liquid hydrocarbons in the Fischer-Tropsch and methanol syntheses. This reaction has also very important environmental implications because CO 2 , a green house gas, may be converted into valuable feedstock. In JAERI, CO 2 reforming using the out-of-pile test facility, which is a 1/30 scale model of the HTTR hydrogen production system, is also being considered as an application of steam reforming. For the purpose to estimate the reformer performance in the facility, numerical analysis of natural gas reforming processes of CO 2 and combined reactions with steam and CO 2 has been carried out using mathematical model on heat and mass balance accompanied by chemical reactions. The reformer performance was evaluated in the effect of pressure, temperature, process gas composition and reaction rate constants of the catalyst on conversion, product gas composition and heat consumption of He gas. And also, the potential of carbon formation by CH 4 cracking reaction and Boudouard reaction was estimated. (author)

Economic democracy and financial reform in Vanuatu

DEFF Research Database (Denmark)

Pacheco Cueva, Vladimir

2007-01-01

This article identifies the rationale and trajectory of finance sector reform as part of the donor-sponsored Comprehensive Reform Program (CRP) in Vanuatu and provides an analysis of the problems associated with the lack of affordable credit for sectors of the population that do not fulfill...... commercial lending criteria. The article relies on financial hegemony theory in order to explain Vanuatu's role within larger international financial structures and rationale for reform. The discussion shows that foreign banking institutions are not interested in broadening credit access to poorer sections...

A class of flux observers for doubly-fed induction generators used in small power wind generation systems

DEFF Research Database (Denmark)

Lascu, C.; Boldea, I.; Blaabjerg, Frede

2013-01-01

This paper investigates a family of stator and rotor flux observers for sensorless operation of doubly-fed induction generators (DFIG). Four stator flux observer topologies are described and compared. All proposed schemes use the voltage and current models connected in parallel or in series...

Comparison and analysis of transient performances for doubly fed induction generator wind turbine under grid voltage dip

DEFF Research Database (Denmark)

Li, H.; Ye, R.; Han, L.

2010-01-01

In order to entirely analyze the transient performances of a grid-connected doubly fed induction generator (DFIG) wind turbine under the different operational states, based on the transient models of DFIG, a two-mass wind turbine electrical equivalent model considering the torsional flexibility o...

Economic growth and institutional reform in modern monarchies and republics

DEFF Research Database (Denmark)

Bjørnskov, Christian; Kurrild-Klitgaard, Peter

2014-01-01

Conventional arguments suggest that republics ought to grow faster than monarchies and experience lower transitional costs following reforms. We employ a panel of 27 countries observed from 1820 to 2000 to estimate these differences. Results show no significant growth differences between the two...... regime types. Effects of incremental reforms do not differ between them, but those of large-scale reforms do. Specifically, we find a strong valley-of-tears effect of large reforms in republics, and monarchies benefit from such reforms in the ten-year perspective adopted here. We offer some tentative...

Economic Growth and Institutional Reform in Modern Monarchies and Republics

DEFF Research Database (Denmark)

Bjørnskov, Christian; Kurrild-Klitgaard, Peter

2014-01-01

Conventional arguments suggest that republics ought to grow faster than monar- chies and experience lower transitional costs following reforms. We employ a panel of 27 countries observed from 1820 to 2000 to estimate these differences. Results show no significant growth differences between the two...... regime types. Ef- fects of incremental reforms do not differ between them, but those of large-scale reforms do. Specifically, we find a strong valley-of-tears effect of large reforms in republics, and monarchies benefit from such reforms in the ten-year perspective adopted here. We offer some tentative...

Eight attention points when evaluating large-scale public sector reforms

DEFF Research Database (Denmark)

Hansen, Morten Balle; Breidahl, Karen Nielsen; Furubo, Jan-Eric

2017-01-01

This chapter analyses the challenges related to evaluations of large-scale public sector reforms. It is based on a meta-evaluation of the evaluation of the reform of the Norwegian Labour Market and Welfare Administration (the NAV-reform) in Norway, which entailed both a significant reorganization...... sector reforms. Based on the analysis, eight crucial points of attention when evaluating large-scale public sector reforms are elaborated. We discuss their reasons and argue that other countries will face the same challenges and thus can learn from the experiences of Norway....

Microcirculatory effects of zinc on fructose-fed hamsters.

Science.gov (United States)

Castiglione, R C; Barros, C M M R; Boa, B C S; Bouskela, E

2016-04-01

Fructose is a major dietary component directly related to vascular dysfunction and diseases such as obesity, diabetes, and hypertension. Zinc is considered a non-pharmacological alternative for treating diabetes due to its antioxidant and hyperglycemia-lowering effects in diabetic animals. Therefore, the aim of this study was to evaluate the effects of dietary zinc supplementation on the microcirculatory parameters of fructose-fed hamsters. Male hamsters (Mesocricetus auratus) were fed drinking water substituted by 10% fructose solution for 60 days, whereas control animals were fed drinking water alone. Their microcirculatory function was evaluated using cheek pouch preparation, as well as their blood glucose and serum insulin levels. Their microcirculatory responses to acetylcholine (ACh, an endothelium-dependent vasodilator) and to sodium nitroprusside (SNP, an endothelium-independent vasodilator) as well as the increase in macromolecular permeability induced by 30 min of ischemia/reperfusion (I/R) were noted. Endothelium-dependent vasodilation was significantly increased in control animals with high zinc supplementation compared to the groups without zinc supplementation. Zinc was able to protect against plasma leakage induced by I/R in all control and fructose-fed groups, although the microvascular permeability was higher in animals fed drinking water substituted by 10% fructose solution compared to those fed filtered drinking water alone. Our results indicate that dietary zinc supplementation can improve microvascular dysfunction by increasing endothelial-dependent dilatation and reducing the increase in macromolecular permeability induced by I/R in fructose-fed animals. Copyright © 2015 The Italian Society of Diabetology, the Italian Society for the Study of Atherosclerosis, the Italian Society of Human Nutrition, and the Department of Clinical Medicine and Surgery, Federico II University. Published by Elsevier B.V. All rights reserved.

Syngas Production from CO2 Reforming and CO2-steam Reforming of Methane over Ni/Ce-SBA-15 Catalyst

Science.gov (United States)

Tan, J. S.; Danh, H. T.; Singh, S.; Truong, Q. D.; Setiabudi, H. D.; Vo, D.-V. N.

2017-06-01

This study compares the catalytic performance of mesoporous 10 Ni/Ce-SBA-15 catalyst for CO2 reforming and CO2-steam reforming of methane reactions in syngas production. The catalytic performance of 10 Ni/Ce-SBA-15 catalyst for CO2 reforming and CO2-steam reforming of methane was evaluated in a temperature-controlled tubular fixed-bed reactor at stoichiometric feed composition, 1023 K and atmospheric pressure for 12 h on-stream with gas hourly space velocity (GHSV) of 36 L gcat -1 h-1. The 10 Ni/Ce-SBA-15 catalyst possessed a high specific BET surface area and average pore volume of 595.04 m2 g-1. The XRD measurement revealed the presence of NiO phase with crystallite dimension of about 13.60 nm whilst H2-TPR result indicates that NiO phase was completely reduced to metallic Ni0 phase at temperature beyond 800 K and the reduction temperature relied on different degrees of metal-support interaction associated with the location and size of NiO particles. The catalytic reactivity was significantly enhanced with increasing H2O/CO2 feed ratio. Interestingly, the H2/CO ratio for CO2-steam reforming of methane varied between 1 and 3 indicated the occurrence of parallel reactions, i.e., CH4 steam reforming giving a H2/CO of 3 whilst reverse water-gas shift (RWGS) reaction consuming H2 to produce CO gaseous product.

Final report of the National Health and Hospitals Reform Commission: will we get the health care governance reform we need?

Science.gov (United States)

Stoelwinder, Johannes U

2009-10-05

The National Health and Hospitals Reform Commission (NHHRC) has recommended that Australia develop a "single health system", governed by the federal government. Steps to achieving this include: a "Healthy Australia Accord" to agree on the reform framework; the progressive takeover of funding of public hospitals by the federal government; and the possible implementation of a consumer-choice health funding model, called "Medicare Select". These proposals face significant implementation issues, and the final solution needs to deal with both financial and political sustainability. If the federal and state governments cannot agree on a reform plan, the Prime Minister may need to go to the electorate for a mandate, which may be shaped by other economic issues such as tax reform and intergenerational challenges.

Telecommunications Reform in Nigeria: The Marketing Challenges ...

African Journals Online (AJOL)

Telecommunications Reform in Nigeria: The Marketing Challenges. ... Journal of Research in National Development ... This paper discusses the telecommunications reforms process, the role of the regulatory body (Nigeria Commission, the current state of the telecommunication sector and the marketing challenges in ...

Discrete Institutional Alternatives of Public Administration Reforms in Countries with Developed and Developing Institutional Environment

Directory of Open Access Journals (Sweden)

Evgeny A. Kapoguzov

2016-09-01

Full Text Available The paper presents an approach to evaluation the impact of the level of development of institutional environment on the success of the reforms of public administration. The indicators that characterize the degree of development of the institutional environment, in particular, the level of protection of property rights, the development of political competition, civil society, corruption, and trust in society are shown. Depending on the elements of the political-administrative system, socio-economic features, that determine the trajectories of reforms, showing alternative purposes and characterized some indicators, that characterizing the results of reforms for the OECD-counties. Showing institutional problems is implementing reforms in the transition countries, depending on the elements of the political and administrative systems, and socio-cultural factors that determine the path of reform, showing alternative purposes and characterized by individual indicators characterizing the results of the OECD reform. From the point of view of the classification results, the emphasis is made on quantitative results of the operational type, in particular, the dynamics of the general government expenditure and the level of employment of civil servants in relation to employment in the economy as a whole. Showing institutional problems in the implementation of reforms in the transition countries, in particular the gap of development of the bureaucratic ethos, the weakness of the market environment and the insufficient level of external pressure on the quality of public services. The significance for the success of reform and systemic cultural change within the state apparatus, which affects the quality of citizens' satisfaction with public services is observed. It is noted that the preliminary formalization of the public sector, the formation of Weberian bureaucracy type is essential for successful implementation of the New Public Management. The factors that

Constructivism and Pedagogical Reform in China: Issues and Challenges

Science.gov (United States)

Tan, Charlene

2017-01-01

This article critically discusses the constructivist ideas, assumptions and practices that undergird the current pedagogical reform in China. The pedagogical reform is part of a comprehensive curriculum reform that has been introduced across schools in Mainland China. Although the official documents did not specify the underpinning theories for…

Energy Reforms in The Developing World: Sustainable Development Compromised?

Directory of Open Access Journals (Sweden)

Said Mbogo Abdallah

2015-06-01

Full Text Available Energy sector reforms with an emphasis on electricity growth have been taking place extensively and rapidly worldwide Particularly, motivated chiefly by classical economics’ standpoint of efficiency and market considerations, reforms have been made in the developed North. Models of reforms in the North have in turn been replicated in developing countries. However, questions arise as to whether the models used are suitable for the mostly rural and socioeconomically disadvantaged economies in the South. It is argued in this paper that a sustainability focused mode of reforms guided by futures studies is needed for such economies. Reforms taking place in Kenya and neighbouring countries are in particular examined from a sustainable future perspective; and appropriate improvements and further research are recommended.

Tax Reform in Brazil: a Public Choice Theory approach

Directory of Open Access Journals (Sweden)

Allan Silveira dos Santos

2013-12-01

Full Text Available This article aims to analyze tax reform necessity and the barriers to the implementation of tax reform at the light of public choice theory. The research identifies the arguments that provides the explanation for the tax reform does not occur in Brazil. The question that the article searches to answer is: what are the justifications for the Brazil not have done tax reform? The literature review addresses the failures of government, public choice theory and the theory of optimal taxation. The evidence and studies show that there are reasons to think about a tax system more consistent with the Brazilian reality, indicating the existence of "government failures" that may be the probable cause of impairment of the tax reform.

A Theory of the Reform of Bureaucratic Institutions

OpenAIRE

Susanto Basu; David Li

2000-01-01

By bureaucratic institutions or bureaucracy, we mean the rules and regulations that are implemented by government agencies. Burdensome bureaucratic institutions are leading obstacles to economic development and therefore the target of economic reform of many countries in today's world. In this paper, we provide a theoretical framework to analyze the reform of bureaucratic institutions. The analysis shows the key to the reform is to properly incentivize the incumbent generation of bureaucrats,...

UKRAINIAN PEASANTRY AS AN OBJECT OF AGRARIAN REFORMS

Directory of Open Access Journals (Sweden)

G. G. Krivchik

2014-12-01

Full Text Available The purpose. The article attempts to analyze the agrarian policy of the modern Ukrainian State in the context of its human factor. It demonstrates the effects of agrarian reforms on social sphere of Ukrainian countryside. Methodology. The author uses the following methods: dialectical – in the depiction of the controversial nature of agrarian reforms; retrospective – in determination of the main stages of agrarian transformations inUkraine; comparative – in revealing common and different features in the agrarian policy of theUSSR and modernUkraine.The scientific novelty is in the substantiation of the natural unity of economic and social policies in agriculture, the use of a variety of historical sources for this purpose. Conclusions. While conducting agrarian reform, started in the early 1990s, and continued up to the present time, only economic factors are taken into consideration. At the same time, human factor, and the interests of the peasantry, in particular, were ignored and not taken into account, despite the declarations and promises of politicians. Peasants were removed from the determination of objectives, directions and methods of the agrarian reform. They acted solely as an object and not the subject of the reform. In this sense, the methods for carrying out agrarian reforms in an independent and democraticUkraine do not differ much from the methods of the Bolshevik leadership. Thus, as it is shown in the article, the consequences of the agrarian reform can be equally dangerous for Ukrainian peasants. The peasants will lose their land forever and become laborers on the land inherited from previous generations. While carrying out a large-scale reform of the agrarian sector, it mustn’t be allowed for oligarchs to take countryside, land and agriculture into their hands. The regulations of sale and purchase of the land must be so that the Ukrainian peasant will remain the main contractor.

Healthcare reform: the role of coordinated critical care.

Science.gov (United States)

Cerra, F B

1993-03-01

To evaluate and editorialize the evolving role of the discipline of critical care as a healthcare delivery system in the process of healthcare reform. The sources included material from the Federal Office of Management and Budget, Health Care Financing Review, President Bush's Office, Association of American Medical Colleges, and publications of the Society of Critical Care Medicine. Data were selected that the author felt was relevant to the healthcare reform process and its implications for the discipline of critical care. The data were extracted by the author to illustrate the forces behind healthcare reform, the implications for the practice of critical care, and role of critical care as a coordinated (managed) care system in the process of healthcare reform. Healthcare reform has been initiated because of a number of considerations that arise in evaluating the current healthcare delivery system: access, financing, cost, dissatisfactions with the mechanisms of delivery, and political issues. The reform process will occur with or without the involvement of critical care practitioners. Reforms may greatly alter the delivery of critical care services, education, training, and research in critical care. Critical care has evolved into a healthcare delivery system that provides services to patients who need and request them and provides these services in a coordinated (managed) care model. Critical care practitioners must become involved in the healthcare reform process, and critical care services that are effective must be preserved, as must the education, training, and research programs. Critical care as a healthcare delivery system utilizing a coordinated (managed) care model has the potential to provide services to all patients who need them and to deliver them in a manner that is cost effective and recognized as providing added value.

FED pumped limiter configuration issues

International Nuclear Information System (INIS)

Haines, J.R.; Fuller, G.M.

1983-01-01

Impurity control in the Fusion Engineering Device (FED) is provided by a toroidal belt pumped limiter. Limiter design issues addressed in this paper are (1) poloidal location of the limiter belt, (2) shape of the limiter surface facing the plasma, and (3) whether the belt is pumped from one or both sides. The criteria used for evaluation of limiter configuration features were sensitivity to plasma-edge conditions and ease of maintenance and fabrication. The evaluation resulted in the selection of a baseline FED limiter that is located at the bottom of the device and has a flat surface with a single leading edge

Status of FED/INTOR electromagnetics

International Nuclear Information System (INIS)

Murray, J.G.

1983-02-01

This report provides a summary of the electromagnetic studies, calculations, and conclusions in the evolution of the base design of FED/INTOR (Fusion Engineering Device/International Tokamak Reactor). The electromagnetic feastures include the startup, control, disruptions, and design of structures. This report provides information concerning the evolution of the electromagnetic studies on FED and the justification for the eddy current design feature. The report shows that a major design feature required is the provision of a low induction and resistive path for toroidal currents to flow in the structures in order to provide self-stabilization and to manage the disruption energy dissipation

FED pumped limiter configuration issues

International Nuclear Information System (INIS)

Haines, J.R.; Fuller, G.M.

1983-01-01

Impurity control in the Fusion Engineering Device (FED) is provided by a toroidal belt pumped limiter. Limiter design issues addressed in this paper are (1) poloidal location of the limiter belt, (2) shape of the limiter surface facing the plasma, and (3) whether the belt is pumped from one or both sides. The criteria used for evaluation of limiter configuration features were sensitivity to plasma edge conditions and ease of maintenance and fabrication. The evaluation resulted in the selection of a baseline FED limiter that is located at the bottom of the device and has a flat surface with a single leading edge

Bureaucratic Reform in Irrigation: A Review of Four Case Studies

Directory of Open Access Journals (Sweden)

Diana Suhardiman

2014-10-01

Full Text Available Poor performance of government-managed irrigation systems persists globally. This paper argues that addressing performance requires not simply more investment or different policy approaches, but reform of the bureaucracies responsible for irrigation management. Based on reform experiences in The Philippines, Mexico, Indonesia, and Uzbekistan, we argue that irrigation (policy reform cannot be treated in isolation from the overall functioning of government bureaucracies and the wider political structure of the states. Understanding of how and why government bureaucracies shape reform processes and outcomes is crucial to increase the actual significance of reforms. To demonstrate this, the paper links reform processes in the irrigation sector with the wider discourse of bureaucratic reform in the political science, public administration, and organisational science literature. Doing so brings to light the need for systematic comparative research on the organisational characteristic of the irrigation bureaucracies, their bureaucratic identities, and how these are shaped by various segments within the bureaucracies to provide the insights needed to improve irrigation systems performance.

Energy-efficient adjustable speed double inverter-fed woundrotor ...

African Journals Online (AJOL)

Energy-efficient adjustable speed double inverter-fed woundrotor induction motor ... at speeds up to double rated without the magnetic flux reducing is presented. ... Keywords: power, double-fed wound-rotor induction motor drive, steel and ...

A PVTC system integrating photon-enhanced thermionic emission and methane reforming for efficient solar power generation

Institute of Scientific and Technical Information of China (English)

Wenjia Li; Hongsheng Wang; Yong Hao

2017-01-01

A new photovoltaic-thermochemical (PVTC) conceptual system integrating photon-enhanced thermionic emission (PETE) and methane steam reforming is proposed.Major novelty of the system lies in its potential adaptivity to primary fuels (e.g.methane) and high efficiencies of photovoltaic and thermochemical power generation,both of which result from its operation at much elevated temperatures (700-1000 ℃)compared with conventional photovoltaic-thermal (PVT) systems.Analysis shows that an overall power generation efficiency of 45.3％ and a net solar-to-electric efficiency of 39.1％ could be reached at an operating temperature of 750 ℃,after considering major losses during solar energy capture and conversion processes.The system is also featured by high solar share (37％) in the total power output,as well as high energy storage capability and very low CO2 emissions,both enabled by the integration of methane reforming with photovoltaic generation at high temperatures.

Hydrogen production by autothermal reforming of ethanol: pilot plant

Energy Technology Data Exchange (ETDEWEB)

Marin Neto, Antonio Jose; Camargo, Joao Carlos; Lopes, Daniel Gabriel; Ferreira, Paulo F.P. [Hydrogen Technology (HyTron), Campinas, SP (Brazil)], Email: antonio@hytron.com.br; Neves Junior, Newton Pimenta; Pinto, Edgar A. de Godoi Rodrigues; Silva, Ennio Peres da [Universidade Estadual de Campinas (DFA/ IFGW/UNICAMP), SP (Brazil). Inst. de Fisica Gleb Wataghin. Dept. de Fisica Aplicada; Furlan, Andre Luis [Universidade Estadual de Campinas (FEC/UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica

2010-07-01

This work provides information about the development of an integrated unit for hydrogen production by auto thermal reforming of ethanol with nominal capacity of 1 kg/h H{sub 2} 4.5 (99.995%). The unit is composed by a Fuel Processing Module (FPM), resulting from auto thermal and shift reactor integration, responsible for the thermochemical step, plus an over heater of the liquid input (EtOH and H{sub 2}O), operated recovering thermal energy from PSA blown-down (H{sub 2} Purification Module - MPH2), besides other thermal equipment which completes the integration. Using a computational routine for scaling the process and preliminary performance analysis, it was possible to optimize operating conditions, essential along unit operations design. Likewise, performance estimation of the integrated unit proceeds, which shows efficiency about 72.5% from FPM. Coupled with the PSA recovery rate, 72.7%, the unit could achieve overall energy performance of 52.7%, or 74.4% working in co-generation of hydrogen and heat. (author)