NEC-2020 emission reduction scenarios

DEFF Research Database (Denmark)

Slentø, Erik; Nielsen, Ole-Kenneth; Hoffmann, Leif

The upcoming NEC-2020 EU directive sets up emission ceilings for NOX, SO2, NH3, NMVOC and PM in order to meet the environmental exposure targets of the Thematic Strategy. This report contains an assessment of intermediary emission reduction scenarios for Denmark, computed by the GAINS model 2007,......, which serves as the basis for the pending negotiations in EU. The assessment is brought up to date by including a brief evaluation of the new reduction scenarios published in 2008, founding the European Commission NEC-2020 directive proposal....

Methane emission reduction: an application of FUND

NARCIS (Netherlands)

Tol, R.S.J.; Heintz, R.J.; Lammers, P.E.M.

2003-01-01

Methane is, after carbon dioxide, the most important anthropogenic greenhouse gas. Governments plan to abate methane emissions. A crude set of estimates of reduction costs is included in FUND, an integrated assessment model of climate change. In a cost-benefit analysis, methane emission reduction is

Investment Strategy of Emission-Reduction Technology in a Supply Chain

Directory of Open Access Journals (Sweden)

Gao Xiang Lou

2015-08-01

Full Text Available Greenhouse gas emissions have serious impacts on the natural environment. Therefore, the restrictions imposed on carbon emission force enterprises to take carbon emission into consideration when making production decisions. In this paper, in the context of allowing emission trading and investment of emission reduction technology, models were presented for a two-stage supply chain to analyze the optimal investment and pricing decisions. The results indicate that manufacturer’s endurance capacity of reduction difficulty is higher in the cooperation model than in the Stackelberg game model, and that perfect coordination of supply chains can be realized by a revenue sharing contract. From the perspective of a consumer, low-carbon products mean higher price, so that subsidies or tax exemptions should be provided to keep low prices. Meanwhile, the government can promote investment in emission-reduction technologies and achieve its emission reduction targets by controlling emission trading price, strengthening emission reduction publicity and providing technology investment subsidies.

A carbon emissions reduction index: Integrating the volume and allocation of regional emissions

International Nuclear Information System (INIS)

Chen, Jiandong; Cheng, Shulei; Song, Malin; Wu, Yinyin

2016-01-01

Highlights: • We build a carbon emissions reduction index (CERI). • The aim is to quantify the pressure on policymakers to reduce emissions. • Scale-related effects and carbon emissions allocations are included in the CERI. • Different standards of carbon emissions allocations are also considered. • We decompose the Gini coefficient to evaluate the effects of three factors. - Abstract: Given the acceleration of global warming and rising greenhouse gas emissions, all countries are facing the harsh reality of the need to reduce carbon emissions. In this study, we propose an index to quantify the pressure faced by policymakers to reduce such emissions, termed the carbon emissions reduction index. This index allows us to observe the effect of carbon emissions volume on the pressure faced by policymakers and study the impact of optimizing interregional carbon emissions on reducing this pressure. In addition, we account for several carbon emissions standards in constructing the index. We conclude that the variation in the index is likely to be attributable to carbon emissions volume, regional ranking, and population (population can also be replaced by GDP, resource endowment, or other factors). In addition, based on empirical data on the world’s largest emitter of carbon dioxide (China), this study analyzes the evolution of pressure to reduce emissions on a country’s policymakers. The results show that the growing volume and unsuitable allocation of carbon emissions from 1997 to 2012 imposed increasing pressure on the Chinese government in this regard. In addition, reductions in carbon emissions volume and regional ranking are primary factors that impact pressure on policymakers.

National environmental targets and international emission reduction instruments

International Nuclear Information System (INIS)

Morthorst, P.E.

2003-01-01

According to the agreed burden sharing within the European Union the overall EU emission reduction target as agreed by in the Kyoto protocol is converted into national greenhouse gas reduction-targets for each of the member states. In parallel with national emission reduction initiatives common EU policies for emission reductions are considered. Currently discussed is the introduction of a market for tradable permits for CO 2 -emissions to achieve emission reductions within the power industry and other energy intensive industries. In parallel with this markets for green certificates to deploy renewable energy technologies seem to be appearing in a number of countries, among these Denmark, Italy, Sweden, Belgium (Flanders), England and Australia. Although these national initiatives for a green certificate market are fairly different, they could be a starting point for establishing a common EU certificate market. But interactions between national targets for greenhouse gas emissions and these international instruments for emission reduction are not a trivial matter, especially not seen in relation to the possible contributions of these instruments in achieving national GHG-reduction targets. The paper is split into three parts all taking a liberalised power market as starting point: The first part discusses the consequences of a general deployment of renewable energy technologies, using planning initiatives or national promotion schemes (feed-in tariffs). In the second part an international green certificate market is introduced into the liberalised power market context, substituting other national promotion schemes. Finally, in the third part a combination of an international green certificate market (TGC) and an international emission-trading scheme for CO 2 is analysed within the liberalised international power market set-up. The main conclusion is that neither the use of national renewable support schemes nor the introduction of a TGC-market into a liberalised

Global warming and its implication to emission reduction strategies for residential buildings

Energy Technology Data Exchange (ETDEWEB)

Wang, Xiaoming; Chen, Dong; Ren, Zhengen [CSIRO Climate Adaptation Flagship and CSIRO Ecosystem Sciences, Commonwealth Scientific and Industrial Research Organisation (CSIRO), P.O. Box 56, Graham Road, Highett, Victoria 3190 (Australia)

2011-04-15

Carbon emission reduction schemes by improving residential building energy performance are often developed and assessed upon the assumption of current or stationary climates. This study investigated the heating and cooling (H-C) energy requirements and corresponding carbon emissions of residential houses in different climatic conditions in relation to global warming. This included assessing and quantifying the efficacy of emission reduction schemes based on emission reduction capacity (ERC). ERC represents the percentage of projected carbon emission reduction under changing climate in a specific year compared to the expected reduction by a scheme at current or stationary climates. It is shown that in a heating-dominated region with a cold climate or temperate climate with cold winter, ERC is projected to increase (or the projected emission reduction is higher than the expected reduction under the emission reduction scheme) in the presence of global warming. In contrast, in a cooling-dominated region with a hot dry or hot humid climate or an H-C balanced temperate climate, ERC is projected to decline. This implies that emission reductions will be lower than those initially targeted by the emission reduction scheme without consideration of global warming. Additionally, to reflect the changing carbon emission over years due to climate change, the average emission reduction capacity (AERC) was also proposed for the assessment of reduction schemes. It was concluded that the design and assessment of carbon emission reduction schemes for residential buildings need to move beyond its assumptions of a current or stationary climate to take into account climate change impacts. (author)

Can environmental innovation facilitate carbon emissions reduction? Evidence from China

International Nuclear Information System (INIS)

Zhang, Yue-Jun; Peng, Yu-Lu; Ma, Chao-Qun; Shen, Bo

2017-01-01

Environmental innovation has been recognized as an efficient way of addressing environmental problems. However, how environmental innovation may affect carbon emissions in China and whether the effect may differ among various environmental innovation variables remain to be investigated. Therefore, based on the panel data of China’s 30 provinces during 2000–2013, we use a system generalized method of moments (SGMM) technique to estimate the effect of environmental innovation on carbon emissions in China. Also, we evaluate the effect on carbon emission reduction of China’s initial carbon emissions trading (CET) scheme. Empirical results indicate that, most environmental innovation measures in China reduce carbon emissions effectively. Among the various environmental innovation factors, energy efficiency exerts the most evident effect on carbon emissions abatement in China; meanwhile, resources for innovation and knowledge innovation also play prominent roles in this regard. However, the impact of governmental environmental policies on curbing carbon emissions reduction suffers from a lag effect, which mainly occurred during 2006–2013. Finally, despite the short time of operation and incomplete market mechanism, the pilot CET in China has appeared relatively promising with regard to carbon emissions reduction. - Highlights: • The SGMM is used for the effect of environmental innovation on carbon emissions. • Energy efficiency proves the most effective way to reduce China’s carbon emissions. • Innovation resources and knowledge innovation are conducive for carbon reduction. • The governmental environmental policies have lag effect on carbon reduction. • The effect of China’s initial CET on carbon emissions reduction has appeared.

Modeling nitrate-nitrogen load reduction strategies for the Des Moines River, Iowa using SWAT.

Science.gov (United States)

Schilling, Keith E; Wolter, Calvin F

2009-10-01

The Des Moines River that drains a watershed of 16,175 km(2) in portions of Iowa and Minnesota is impaired for nitrate-nitrogen (nitrate) due to concentrations that exceed regulatory limits for public water supplies. The Soil Water Assessment Tool (SWAT) model was used to model streamflow and nitrate loads and evaluate a suite of basin-wide changes and targeting configurations to potentially reduce nitrate loads in the river. The SWAT model comprised 173 subbasins and 2,516 hydrologic response units and included point and nonpoint nitrogen sources. The model was calibrated for an 11-year period and three basin-wide and four targeting strategies were evaluated. Results indicated that nonpoint sources accounted for 95% of the total nitrate export. Reduction in fertilizer applications from 170 to 50 kg/ha achieved the 38% reduction in nitrate loads, exceeding the 34% reduction required. In terms of targeting, the most efficient load reductions occurred when fertilizer applications were reduced in subbasins nearest the watershed outlet. The greatest load reduction for the area of land treated was associated with reducing loads from 55 subbasins with the highest nitrate loads, achieving a 14% reduction in nitrate loads achieved by reducing applications on 30% of the land area. SWAT model results provide much needed guidance on how to begin implementing load reduction strategies most efficiently in the Des Moines River watershed.

Canadian options for greenhouse gas emission reduction (COGGER)

International Nuclear Information System (INIS)

Robinson, J.; Fraser, M.; Haites, E.; Harvey, D.; Jaccard, M.; Reinsch, A.; Torrie, R.

1993-09-01

A panel was formed to assess the feasibility and cost of energy-related greenhouse gas (GHG) emissions reduction in Canada. The panel studies focused on the potential for increased energy efficiency and fuel switching and their effect in reducing CO 2 emissions by reviewing the extensive literature available on those topics and assessing their conclusions. Economically feasible energy savings are estimated mostly in the range of 20-40% savings by the year 2010 relative to a reference-case projection, with a median of 23%. The panel concluded that achieving the identified economic potential for increased energy efficiency by 2010 will depend on development of additional demand-side management or energy efficiency programs that go well beyond current policies and programs. Fuel switching will play a much smaller role in stabilizing energy-related CO 2 emissions than improved energy efficiency. Technology substitution and broader structural change would enable Canada to achieve significant reductions in CO 2 emissions; however, more research is needed on achieving emission reductions that would approach the levels estimated to be required globally for stabilization of atmospheric CO 2 concentrations. Achieving such emissions reductions would likely require a combination of significant improvements in energy efficiency, major changes in energy sources, and substantial changes in economic activity and life styles, relative to that projected in most reference-case forecasts. 5 refs., 1 fig., 10 tabs

Elements for a policy of greenhouse effect gases reduction; Elements pour une politique de reduction des emissions de gaz a effet de serre

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-01-15

In the framework of the ''Grenelle de l'environnement'' on the fight against the greenhouse effect gases, the authors aim to offer propositions and recommendations for the future energy policy. They explain the possible confusions. They discuss the economic efficiency of propositions of CO{sub 2} emissions reduction, the actions propositions in the different sectors and the axis of research and development. (A.L.B.)

Deep greenhouse gas emission reductions in Europe: Exploring different options

International Nuclear Information System (INIS)

Deetman, Sebastiaan; Hof, Andries F.; Pfluger, Benjamin; Vuuren, Detlef P. van; Girod, Bastien; Ruijven, Bas J. van

2013-01-01

Most modelling studies that explore emission mitigation scenarios only look into least-cost emission pathways, induced by a carbon tax. This means that European policies targeting specific – sometimes relatively costly – technologies, such as electric cars and advanced insulation measures, are usually not evaluated as part of cost-optimal scenarios. This study explores an emission mitigation scenario for Europe up to 2050, taking as a starting point specific emission reduction options instead of a carbon tax. The purpose is to identify the potential of each of these policies and identify trade-offs between sectoral policies in achieving emission reduction targets. The reduction options evaluated in this paper together lead to a reduction of 65% of 1990 CO 2 -equivalent emissions by 2050. More bottom-up modelling exercises, like the one presented here, provide a promising starting point to evaluate policy options that are currently considered by policy makers. - Highlights: ► We model the effects of 15 climate change mitigation measures in Europe. ► We assess the greenhouse gas emission reduction potential in different sectors. ► The measures could reduce greenhouse gas emissions by 60% below 1990 levels in 2050. ► The approach allows to explore arguably more relevant climate policy scenarios

Engine 3E. NO{sub x} reduction by means of homogenisation of mixtures inside combustion chambers. Final report; Engine 3E. NO{sub x}-Reduktion durch Homogenisierung des Gemisches in Brennkammern. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Zarzalis, N.; Homann; Schubert

1999-11-05

This is the final report of the Technology Project 'NO{sub x} reduction by means of homogenisation of mixtures inside combustion chambers', which is part of the Engine 3E 2010 programme of the BMBF, which was to promote research in aircraft engineering. In this project, technologies were developed to achieve a 60% reduction of NO{sub x} emissions as compared to ICAO '95 in an annular combustion chamber in realistic operating conditions where the emissions of substances oher than NO{sub x} were to be of the same level as the emissions of modern jet drives. Further, the design of the new combustion chamber was to be conventional in order to retain the possibility of converting existing propulsion systems to the new technology. [German] Diese Notiz enthaelt den Abschlussbericht des Technologievorhabens 'NO{sub x}-Reduktion durch Homogenisierung des Gemisches in Brennkammern'. Das Vorhaben ist Teil des Luftfahrtfoerderprogramms Engine 3E 2010 der Bundesregierung und wird vom Bundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie (BMBF) unter dem Foerderkennzeichen 20T9540 gefoerdert. Das Programm wurde am 01. Juli 1995 begonnen und endete am 30. Juni 1999. Entsprechend dem Foerderantrag wurden in dem Vorhaben Einzeltechnologien erarbeitet, die erforderlich sind, um eine 60% Reduktion der NO{sub x}-Emissionen gegenueber ICAO '95 in einer Ringbrennkammer unter realistischen Betriebsbedingungen zu demonstrieren, wobei die restlichen Emissionen das Emissionsniveau moderner Triebwerke nicht ueberschreiten sollten. Darueber hinaus sollte das aeussere Design der zu entwickelnden Brennkammer sind von konventionellen Brennkammern nicht unterscheiden, um die Moeglichkeit der Umruestung von alten Triebwerken mit der Brennkammern der neuen Technologie offen zu halten. (orig.)

Quantifying emission reduction contributions by emerging economics

Energy Technology Data Exchange (ETDEWEB)

Moltmann, Sara; Hagemann, Markus; Eisbrenner, Katja; Hoehne, Niklas [Ecofys GmbH, Koeln (Germany); Sterk, Wolfgang; Mersmann, Florian; Ott, Hermann E.; Watanabe, Rie [Wuppertal Institut (Germany)

2011-04-15

Further action is needed that goes far beyond what has been agreed so far under the United Nations Framework Convention on Climate Change (UNFCCC) and the Kyoto Protocol to 'prevent dangerous anthropogenic interference with the climate system', the ultimate objective of the UNFCCC. It is out of question that developed countries (Annex I countries) will have to take a leading role. They will have to commit to substantial emission reductions and financing commitments due to their historical responsibility and their financial capability. However, the stabilisation of the climate system will require global emissions to peak within the next decade and decline well below half of current levels by the middle of the century. It is hence a global issue and, thus, depends on the participation of as many countries as possible. This report provides a comparative analysis of greenhouse gas (GHG) emissions, including their national climate plans, of the major emitting developing countries Brazil, China, India, Mexico, South Africa and South Korea. It includes an overview of emissions and economic development, existing national climate change strategies, uses a consistent methodology for estimating emission reduction potential, costs of mitigation options, provides an estimate of the reductions to be achieved through the national climate plans and finally provides a comparison of the results to the allocation of emission rights according to different global effort-sharing approaches. In addition, the report discusses possible nationally appropriate mitigation actions (NAMAs) the six countries could take based on the analysis of mitigation options. This report is an output of the project 'Proposals for quantifying emission reduction contributions by emerging economies' by Ecofys and the Wuppertal Institute for the Federal Environment Agency in Dessau. It builds upon earlier joint work ''Proposals for contributions of emerging economies to the climate

Implementing a system of emissions trading to manage GHGs; La mise en oeuvre des systemes de quotas d'emission echangeables dans la gestion des emissions de GES

Energy Technology Data Exchange (ETDEWEB)

Webster, A. [Sherbrooke Univ., PQ (Canada)

2005-06-01

The exact geographical location of greenhouse gas (GHG) emissions has no bearing on climate change. In this context the Kyoto Protocol recognizes mechanisms of flexibility for countries to attain their GHG emissions reductions. Emission trading takes advantage of this flexibility, allowing GHGs to be sold, traded, or stockpiled. An emission quota allows the owner of an energy facility to emit a certain amount of GHGs throughout the year. If this quota is not used, it can be stockpiled for the following year or it could be traded to another enterprise and owner. If the amount of emissions exceeds the initial quotas, facilities can adopt different strategies, such as reducing their GHG purchasing quotas from national enterprises that have reduced their emissions or purchase quotas from international markets. The initial allocation of quotas is an important political decision since it determines the initial distribution of the GHG reduction effort. The establishment of a quota system can contribute to economical competition and can be used to fulfill environmental objectives regarding energy source development. It is also the most effective way to minimize greenhouse gas emissions and the associated environmental impacts. This paper reviewed the regulations regarding the design of the quota system; how the ceiling of emission levels was determined; the criteria for allocating the quotas and the rules for the exchange of emission quotas. Canada and the European countries have expressed interest in this system of emissions trading. 7 refs.

Reduction de la sensation des malaises thermiques: determination ...

African Journals Online (AJOL)

La présente étude a pour objet de contribuer à la réduction de la sensation des malaises thermiques à travers la recherche des orientations préférentielles des bâtiments dans les différentes zones du Togo à partir des conditions aérodynamiques et climatiques locales. Les données climatiques à savoir la température, ...

Modeling nitrate-nitrogen load reduction strategies for the des moines river, iowa using SWAT

Science.gov (United States)

Schilling, K.E.; Wolter, C.F.

2009-01-01

The Des Moines River that drains a watershed of 16,175 km2 in portions of Iowa and Minnesota is impaired for nitrate-nitrogen (nitrate) due to concentrations that exceed regulatory limits for public water supplies. The Soil Water Assessment Tool (SWAT) model was used to model streamflow and nitrate loads and evaluate a suite of basin-wide changes and targeting configurations to potentially reduce nitrate loads in the river. The SWAT model comprised 173 subbasins and 2,516 hydrologic response units and included point and nonpoint nitrogen sources. The model was calibrated for an 11-year period and three basin-wide and four targeting strategies were evaluated. Results indicated that nonpoint sources accounted for 95% of the total nitrate export. Reduction in fertilizer applications from 170 to 50 kg/ha achieved the 38% reduction in nitrate loads, exceeding the 34% reduction required. In terms of targeting, the most efficient load reductions occurred when fertilizer applications were reduced in subbasins nearest the watershed outlet. The greatest load reduction for the area of land treated was associated with reducing loads from 55 subbasins with the highest nitrate loads, achieving a 14% reduction in nitrate loads achieved by reducing applications on 30% of the land area. SWAT model results provide much needed guidance on how to begin implementing load reduction strategies most efficiently in the Des Moines River watershed. ?? 2009 Springer Science+Business Media, LLC.

Reduction by metals dissolved in liquid ammonia of keto steroids. Equilibration of the alcohols; Reduction par les metaux dissous dans l'ammoniac liquide de cetones en serie steroide. Equilibration des alcools

Energy Technology Data Exchange (ETDEWEB)

Giroud, A M [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1970-07-01

'une cetone par les metaux en dissolution fait intervenir deux electrons: on peut considerer comme intermediaire un radical-anion, puis un dianion ou un carbanion. Le radical-anion pouvant aussi se dimeriser pour donner des pinacols. Pour interpreter les resultats des reductions, il nous fallait connaitre les stabilites relatives des alcools ce qui nous a conduit a faire des equilibrations. Dans un premier chapitre, nous etudions les methodes de preparation de l'androstanone-ll et des androstanols-ll{alpha} et ll{beta}. Nous verifions ensuite qu'il n'est pas possible selon nos methodes de conclure sur la stabilite relative des deux alcools par equilibrations experimentales. Nous decrivons enfin les methodes de reduction de la cetone par les metaux alcalins et alcalino-terreux dissous dans l'ammoniac liquide, suivant deux procedes: soit en presence de donneur de protons, soit avec addition posterieure de donneur de protons. Ces reductions conduisent a un melange des deux alcools ou l'isomere {alpha} equatorial stable predomine. Dans un deuxieme chapitre, nous etudions l'action de l'acide selenique et de l'eau oxygenee sur la cholestanone-3, reaction qui nous a permis d'etudier la preparation et la stereochimie des derives du A-nor cholestane. Nous decrivons ensuite la preparation des A-nor cholestanols 2{alpha} et 2{beta} et des acetates correspondants. L'equilibration par des methodes chimiques de ces alcools montre que l'alcool 2 {alpha} est plus stable que l'alcool 2{beta}, ce qui est confirme par le calcul. Enfin, la reduction de la A-nor cholestanone-2 par les metaux en dissolution conduit toujours de facon preponderante a l'epimere 2 {beta} le moins stable avec en outre formation de pinacols. Nous consacrons enfin le troisieme chapitre a l'etude des reductions de l'androstanone-17 et des stabilites relatives des deux alcools 17{alpha} et 17{beta}. Quel que soit le mode operatoire utilise, nous obtenons toujours presque exclusivement l'acool 17{beta} le plus stable. D

DES/CCHP: The best utilization mode of natural gas for China’s low carbon economy

International Nuclear Information System (INIS)

Li, Yajun; Xia, Yan

2013-01-01

In this paper, through the analysis of the great challenges faced by China’s energy industry in the development of low carbon economy, it is advisable that China increase the proportion of natural gas (NG) in primary energy as the main strategy of energy conservation and CO 2 reduction in the advancement of industrialization and urbanization. In the near future, NG will become one of the major energy suppliers for new towns and industrial parks, and work for electric peak shaving when used in distributed energy system/combined cold, heat and power (DES/CCHP). However, as an efficient approach to improve the energy utilization efficiency, DES/CCHP cannot only increase the current energy efficiency from 33% to 50.3% (the world’s average), but also reduce the cost of terminal supplies of power, cold, steam and hot water. It will become one of the most important means to control CO 2 emissions in the next 20 years, and is essential to China’s low carbon industrialization and urbanization. - Highlights: ► China’s high economic growth has lead to a huge amount of carbon emissions. ► Climate change calls for a low carbon economy in China. ► The pressure of carbon emission reduction requires China reduce the excessive dependency on coal and oil. ► Natural gas used in distributed energy system/combined cold, heat and power (NG DES/CCHP) is low in carbon emission. ► NG DES/CCHP is the optimal energy supplier for a low carbon economy in China.

Unilateral emission reductions of the EU and multilateral emission reductions of the developed countries. Assessing the impact on Finland with TIMES model

International Nuclear Information System (INIS)

Ekholm, T.; Lehtilae, A.; Savolainen, I.

2008-03-01

This report assesses the impact of the unilateral greenhouse gas emission reductions proposed by the EU on the structure of European and Finnish energy systems with TIMES models. The two models used are techno-economical energy system models including an extensive description of technologies on energy production and consumption. The models derive the sectoral energy demand from given economic projections and calculate the optimal way of satisfying the energy demand through market equilibrium. The basis for EU wide calculations was the Common POLES-IMAGE economic scenarios which project a GDP growth of 2.4 % p.a. until 2020. A sensitivity analysis was conducted with a lower economic growth projection. The results indicated that a reduction of 20 % compared to 1990 emission levels by 2020 would lead to most reductions being conducted at the electricity sector. The consumption of coal in electricity generation would decrease considerably. In the long term some of the natural gas based production would incorporate carbon capture and storage (CCS), and the use of wind power would grow substantially. The value of carbon would lie at levels around 20 to 30 euro/t CO 2 by 2020 were the reductions carried out without flexibility mechanisms. With a reduction target of -30 % by 2050, the value of carbon would rise to 40 . 50 euro/t CO 2 by 2050, and nearly to 100 euro/t CO 2 with a target of -60 % in 2050. The calculations on Finland were based on economic projections by the Ministry of Finance and the Government Institute of Economic Research. The scenarios asses the optimal way of reducing Finnish emissions with a range of prices for emission rights between 20 and 50 euro/t CO 2 . The sectors not included in the emission trading scheme were assumed to conduct reductions with costs up to the value of emission rights. The use of coal was reduced after 2010, accompanied by an increase in the use of natural gas. The utilization of bioenergy increases considerable in the total

Carbon emissions and an equitable emission reduction criterion

International Nuclear Information System (INIS)

Golomb, Dan

1999-01-01

In 1995 the world-wide carbon emissions reached 5.8 billion metric tonnes per year (GTC/y). The Kyoto protocol calls for a reduction of carbon emissions from the developed countries (Annex I countries) of 6-8% below 1990 levels on the average, and unspecified commitments for the less developed (non-Annex I) countries. It is doubtful that the Kyoto agreement will be ratified by some parliaments, especially the USA Congress. Furthermore, it is shown that if the non-Annex I countries will not curtail their carbon emissions drastically, the global emissions will soar to huge levels by the middle of the next century. An equitable emission criterion is proposed which may lead to a sustainable rate of growth of carbon emissions, and be acceptable to all countries of the world. The criterion links the rate of growth of carbon emissions to the rate of growth of the Gross Domestic Product (GDP). A target criterion is proposed R = 0.15 KgC/SGDP, which is the current average for western European countries and Japan. This allows for both the growth of the GDP and carbon emissions. However, to reach the target in a reasonable time, the countries for which R≤ 0.3 would be allowed a carbon emission growth rate of 1%./y, and countries for which R≥ 0.3, 0.75%/y. It is shown that by 2050 the world-wide carbon emissions would reach about 10 GTC/y, which is about 3 times less than the Kyoto agreement would allow. (Author)

Global Emissions of Nitrous Oxide: Key Source Sectors, their Future Activities and Technical Opportunities for Emission Reduction

Science.gov (United States)

Winiwarter, W.; Höglund-Isaksson, L.; Klimont, Z.; Schöpp, W.; Amann, M.

2017-12-01

Nitrous oxide originates primarily from natural biogeochemical processes, but its atmospheric concentrations have been strongly affected by human activities. According to IPCC, it is the third largest contributor to the anthropogenic greenhouse gas emissions (after carbon dioxide and methane). Deep decarbonization scenarios, which are able to constrain global temperature increase within 1.5°C, require strategies to cut methane and nitrous oxide emissions on top of phasing out carbon dioxide emissions. Employing the Greenhouse gas and Air pollution INteractions and Synergies (GAINS) model, we have estimated global emissions of nitrous oxide until 2050. Using explicitly defined emission reduction technologies we demonstrate that, by 2030, about 26% ± 9% of the emissions can be avoided assuming full implementation of currently existing reduction technologies. Nearly a quarter of this mitigation can be achieved at marginal costs lower than 10 Euro/t CO2-eq with the chemical industry sector offering important reductions. Overall, the largest emitter of nitrous oxide, agriculture, also provides the largest emission abatement potentials. Emission reduction may be achieved by precision farming methods (variable rate technology) as well as by agrochemistry (nitrification inhibitors). Regionally, the largest emission reductions are achievable where intensive agriculture and industry are prevalent (production and application of mineral fertilizers): Centrally Planned Asia including China, North and Latin America, and South Asia including India. Further deep cuts in nitrous oxide emissions will require extending reduction efforts beyond strictly technological solutions, i.e., considering behavioral changes, including widespread adoption of "healthy diets" minimizing excess protein consumption.

Reduction by metals dissolved in liquid ammonia of keto steroids. Equilibration of the alcohols; Reduction par les metaux dissous dans l'ammoniac liquide de cetones en serie steroide. Equilibration des alcools

Energy Technology Data Exchange (ETDEWEB)

Giroud, A.M. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1970-07-01

'une cetone par les metaux en dissolution fait intervenir deux electrons: on peut considerer comme intermediaire un radical-anion, puis un dianion ou un carbanion. Le radical-anion pouvant aussi se dimeriser pour donner des pinacols. Pour interpreter les resultats des reductions, il nous fallait connaitre les stabilites relatives des alcools ce qui nous a conduit a faire des equilibrations. Dans un premier chapitre, nous etudions les methodes de preparation de l'androstanone-ll et des androstanols-ll{alpha} et ll{beta}. Nous verifions ensuite qu'il n'est pas possible selon nos methodes de conclure sur la stabilite relative des deux alcools par equilibrations experimentales. Nous decrivons enfin les methodes de reduction de la cetone par les metaux alcalins et alcalino-terreux dissous dans l'ammoniac liquide, suivant deux procedes: soit en presence de donneur de protons, soit avec addition posterieure de donneur de protons. Ces reductions conduisent a un melange des deux alcools ou l'isomere {alpha} equatorial stable predomine. Dans un deuxieme chapitre, nous etudions l'action de l'acide selenique et de l'eau oxygenee sur la cholestanone-3, reaction qui nous a permis d'etudier la preparation et la stereochimie des derives du A-nor cholestane. Nous decrivons ensuite la preparation des A-nor cholestanols 2{alpha} et 2{beta} et des acetates correspondants. L'equilibration par des methodes chimiques de ces alcools montre que l'alcool 2 {alpha} est plus stable que l'alcool 2{beta}, ce qui est confirme par le calcul. Enfin, la reduction de la A-nor cholestanone-2 par les metaux en dissolution conduit toujours de facon preponderante a l'epimere 2 {beta} le moins stable avec en outre formation de pinacols. Nous consacrons enfin le troisieme chapitre a l'etude des reductions de l'androstanone-17 et des stabilites relatives des deux alcools 17{alpha} et 17{beta}. Quel que soit le mode operatoire utilise, nous

Solutions and business opportunities to achieve emissions reduction objectives; Solutions et opportunites d'affaires pour atteindre vos objectifs de reduction d'emissions

Energy Technology Data Exchange (ETDEWEB)

Lefebvre, J.-F. [GRAME, Montreal, PQ (Canada)

2003-07-01

Launched in 1989, GRAME is a non-profit organization dedicated to the development of management and analysis tools for sustainable development. It is involved in greenhouse gas (GHG) management, sustainable transportation, sustainable economy and the environment. The author reviewed the events that led to the development of the Kyoto Protocol. The principal factor influencing the development of the Kyoto Protocol was climate change and global warming, caused in large part by GHG emissions. The ratification of the Kyoto Protocol presents business opportunities in both Canada and Quebec, such as the export of products and services based on the expertise developed in the country; promotion of sustainable transportation options; and, investment in energy efficiency and energy substitution. An action plan must include a combination of complementary measures, take into consideration the impact of those measures on the life cycle, and compare the options offering an equivalent service. There are a number of companies that can assist in energy efficiency and energy demand management, including Hydro-Quebec, Gaz Metropolitain, and the Agence de l'efficacite energetique. GRAME has launched an awareness campaign called ClimAction, designed to promote the implementation of concrete measures for the reduction of GHG emissions and energy savings. Successes have been achieved in the renewable energy sector, such as the Paix des Braves agreement between the Inuit and the Quebec government, Hydro-Quebec's commitment to buy 1000 megawatts of wind energy in 10 years, and recent advances in solar water and space heating. The remaining challenges include: government support, separation of duties, and regulations. The factors influencing a Canadian emissions trading market are price of permits, withdrawal of permits, allocation, and when to begin implementation. tabs., figs.

Emissions reduction scenarios in the Argentinean Energy Sector

International Nuclear Information System (INIS)

Di Sbroiavacca, Nicolás; Nadal, Gustavo; Lallana, Francisco; Falzon, James; Calvin, Katherine

2016-01-01

In this paper the LEAP, TIAM-ECN, and GCAM models were applied to evaluate the impact of a variety of climate change control policies (including carbon pricing and emission constraints relative to a base year) on primary energy consumption, final energy consumption, electricity sector development, and CO_2 emission savings of the energy sector in Argentina over the 2010–2050 period. The LEAP model results indicate that if Argentina fully implements the most feasible mitigation measures currently under consideration by official bodies and key academic institutions on energy supply and demand, such as the ProBiomass program, a cumulative incremental economic cost of 22.8 billion US$(2005) to 2050 is expected, resulting in a 16% reduction in GHG emissions compared to a business-as-usual scenario. These measures also bring economic co-benefits, such as a reduction of energy imports improving the balance of trade. A Low CO_2 price scenario in LEAP results in the replacement of coal by nuclear and wind energy in electricity expansion. A High CO_2 price leverages additional investments in hydropower. By way of cross-model comparison with the TIAM-ECN and GCAM global integrated assessment models, significant variation in projected emissions reductions in the carbon price scenarios was observed, which illustrates the inherent uncertainties associated with such long-term projections. These models predict approximately 37% and 94% reductions under the High CO_2 price scenario, respectively. By comparison, the LEAP model, using an approach based on the assessment of a limited set of mitigation options, predicts an 11.3% reduction. The main reasons for this difference include varying assumptions about technology cost and availability, CO_2 storage capacity, and the ability to import bioenergy. An emission cap scenario (2050 emissions 20% lower than 2010 emissions) is feasible by including such measures as CCS and Bio CCS, but at a significant cost. In terms of technology

California Air Resources board's mobil source emission reduction credit guidelines

International Nuclear Information System (INIS)

Dunwoody Lentz, C.; Werner, B.

1993-01-01

The California Air Resources Board has developed guidance for the generation and use of mobil source emission reduction credits. Mobil source credits can be used to improve air quality, or to mitigate increases in emissions associated with industrial and non-industrial sources. They are created by programs which reduce mobile source emission beyond the reductions required by federal, state, and local laws or air quality attainment plans. Significant amounts of credit can be generated by some types of programs which reduce mobile source emissions of oxides of nitrogen (NO x ) and reactive organic gases (ROG). Mobile source credit programs must be carefully structured to ensure that emission reductions are real, accurately quantified, enforceable, and have a defined life. Three potentially feasible programs for the creation of mobile source credits include accelerated retirement of older vehicles, purchase of low-emission buses, and purchase of zero-emission vehicles. These programs are evaluated for their ability to generate credit and to assess their cost effectiveness. Based on the examples presented, two methods of generating mobile source credits, the accelerated retirement of older vehicles and the purchase of low-emission buses, appear to be cost-effective when compared to other emission control measures

Proceedings of the 1998 diesel engine emissions reduction workshop [DEER

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

This workshop was held July 6--9, 1998 in Castine, Maine. The purpose of this workshop was to provide a multidisciplinary forum for exchange of state-of-the-art information on reduction of diesel engine emissions. Attention was focused on the following: agency/organization concerns on engine emissions; diesel engine issues and challenges; health risks from diesel engines emissions; fuels and lubrication technologies; non-thermal plasma and urea after-treatment technologies; and diesel engine technologies for emission reduction 1 and 2.

Energy saving and emission reduction of China's urban district heating

International Nuclear Information System (INIS)

Chen, Xia; Wang, Li; Tong, Lige; Sun, Shufeng; Yue, Xianfang; Yin, Shaowu; Zheng, Lifang

2013-01-01

China's carbon dioxide (CO 2 ) emission ranks highest in the world. China is committed to reduce its CO 2 emission by 40% to 45% from the 2005 levels by 2020. To fulfill the target, China's CO 2 emission reduction must exceed 6995 million tons. Energy consumption and CO 2 emission of China's urban district heating (UDH) are increasing. The current policy implemented to improve UDH focuses on replacing coal with natural gas to reduce energy consumption and CO 2 emission to some extent. This paper proposes that heat pump heating (HPH) could serve as a replacement for UDH to help realize energy-saving and emission-reduction goals to a greater extent. The paper also analyzes the impact of this replacement on the heating and power generation sectors. The results show that replacing coal-based UDH with HPH decreases energy consumption and CO 2 emission by 43% in the heating sector. In the power generation sector, the efficiency of power generation at the valley electricity time increases by 0.512%, and the ratio of peak–valley difference decreases by 16.5%. The decreases in CO 2 emission from the heating and power generation sectors cumulatively account for 5.55% of China's total CO 2 emission reduction target in 2020. - Highlights: ► Replacing urban district heating with heat pump heating. ► Impact of heat pump heating on heating and power generation sectors. ► Potential of energy saving and emission reduction for heat pump heating. ► China should adjust current urban heating strategy

Counter of Energy Conservation and Emission Reduction for the Public in China

Energy Technology Data Exchange (ETDEWEB)

Wujun Wen; Xiaowen Liu; Geng Xu (Research Center for Sustainable Development of Shandong Province, Shandong Normal Univ., Jinan Shandong 250014 (China)). e-mail: wenwj@sdnu.edu.cn

2009-05-15

The Ministry of Science and Technology of China organized experts to develop the Internet-based software Counter of Energy Conservation and Emission Reduction to directly measure energy conservation and emission reduction potentials in people's daily lives. Research and testing of the software have been completed, and the software is available to the public on the Internet. The Counter of Energy Conservation and Emission Reduction software is being promoted with the aim of stimulating the public's enthusiasm for energy conservation and emission reduction. The software is of great significance in energy conservation and emission reduction education oriented to elementary and middle school students and community residents, thus changing the lagged public participation of Chinese citizens in energy conservation and emission reduction. The counter can calculate people's energy conservation and emission reduction potential in six aspects of daily life. The user can know his or her value of energy conservation and emission reduction in each aspect by clicking the options in keeping with his or her true daily routines. The user can also know the amounts of energy conservation and emission reduction as well as the potential energy conservation and emission reduction of the whole nation by clicking the Effect Calculation Button. Family life areas mainly include the methods and habits of water use, the use of energy conservation cookers, methods of saving paper, the use of environmental protection products, the habit of home appliance use, and the methods of washing clothing, especially the use of the washing machine with the function of energy conservation. Housing includes the building materials, the heating and cooling systems, the temperature control measures, and the lighting, etc. Heating and cooling times for the house by air conditioner should be reduced. Architects can do a great deal by using energy-efficient building materials and designing houses

Uncertainty quantification of CO2 emission reduction for maritime shipping

International Nuclear Information System (INIS)

Yuan, Jun; Ng, Szu Hui; Sou, Weng Sut

2016-01-01

The International Maritime Organization (IMO) has recently proposed several operational and technical measures to improve shipping efficiency and reduce the greenhouse gases (GHG) emissions. The abatement potentials estimated for these measures have been further used by many organizations to project future GHG emission reductions and plot Marginal Abatement Cost Curves (MACC). However, the abatement potentials estimated for many of these measures can be highly uncertain as many of these measures are new, with limited sea trial information. Furthermore, the abatements obtained are highly dependent on ocean conditions, trading routes and sailing patterns. When the estimated abatement potentials are used for projections, these ‘input’ uncertainties are often not clearly displayed or accounted for, which can lead to overly optimistic or pessimistic outlooks. In this paper, we propose a methodology to systematically quantify and account for these input uncertainties on the overall abatement potential forecasts. We further propose improvements to MACCs to better reflect the uncertainties in marginal abatement costs and total emissions. This approach provides a fuller and more accurate picture of abatement forecasts and potential reductions achievable, and will be useful to policy makers and decision makers in the shipping industry to better assess the cost effective measures for CO 2 emission reduction. - Highlights: • We propose a systematic method to quantify uncertainty in emission reduction. • Marginal abatement cost curves are improved to better reflect the uncertainties. • Percentage reduction probability is given to determine emission reduction target. • The methodology is applied to a case study on maritime shipping.

Optical crosstalk reduction using Amplified Spontaneous Emission (ASE)

NARCIS (Netherlands)

Chen, H.; Fontaine, N.K.; Ryf, R.; Alvarado, J.C.; van Weerdenburg, J.A.A.; Amezcua-Correa, R.; Okonkwo, C.; Koonen, A.M.J.

2018-01-01

We employ spectrally filtered amplified spontaneous emission as the signal carrier and matched local oscillator to mitigate optical crosstalk. We demonstrate polarization crosstalk reduction in single-mode fiber transmission and modal crosstalk reduction over multimode fiber.

Quantified, localized health benefits of accelerated carbon dioxide emissions reductions

Science.gov (United States)

Shindell, Drew; Faluvegi, Greg; Seltzer, Karl; Shindell, Cary

2018-04-01

Societal risks increase as Earth warms, and increase further for emissions trajectories accepting relatively high levels of near-term emissions while assuming future negative emissions will compensate, even if they lead to identical warming as trajectories with reduced near-term emissions1. Accelerating carbon dioxide (CO2) emissions reductions, including as a substitute for negative emissions, hence reduces long-term risks but requires dramatic near-term societal transformations2. A major barrier to emissions reductions is the difficulty of reconciling immediate, localized costs with global, long-term benefits3,4. However, 2 °C trajectories not relying on negative emissions or 1.5 °C trajectories require elimination of most fossil-fuel-related emissions. This generally reduces co-emissions that cause ambient air pollution, resulting in near-term, localized health benefits. We therefore examine the human health benefits of increasing 21st-century CO2 reductions by 180 GtC, an amount that would shift a `standard' 2 °C scenario to 1.5 °C or could achieve 2 °C without negative emissions. The decreased air pollution leads to 153 ± 43 million fewer premature deaths worldwide, with 40% occurring during the next 40 years, and minimal climate disbenefits. More than a million premature deaths would be prevented in many metropolitan areas in Asia and Africa, and >200,000 in individual urban areas on every inhabited continent except Australia.

Volatile organic compounds and oxides of nitrogen. Further emission reductions

Energy Technology Data Exchange (ETDEWEB)

Froste, H [comp.

1997-12-31

This report presents the current status in relation to achievement of the Swedish Environmental target set by Parliament to reduce emission of volatile organic compounds by 50 per cent between 1988 and 2000. It also instructed the Agency to formulate proposed measures to achieve a 50 per cent reduction of emission of nitrogen oxides between 1985 and 2005. The report presents an overall account of emission trends for volatile organic compounds (from all sectors) and nitrogen oxides (from the industry sector) and steps proposed to achieve further emission reductions. 43 refs

Volatile organic compounds and oxides of nitrogen. Further emission reductions

Energy Technology Data Exchange (ETDEWEB)

Froste, H. [comp.

1996-12-31

This report presents the current status in relation to achievement of the Swedish Environmental target set by Parliament to reduce emission of volatile organic compounds by 50 per cent between 1988 and 2000. It also instructed the Agency to formulate proposed measures to achieve a 50 per cent reduction of emission of nitrogen oxides between 1985 and 2005. The report presents an overall account of emission trends for volatile organic compounds (from all sectors) and nitrogen oxides (from the industry sector) and steps proposed to achieve further emission reductions. 43 refs

Impact of Agricultural Emission Reductions on Fine Particulate Matter and Public Health

Science.gov (United States)

Pozzer, A.; Tsimpidi, A.; Karydis, V.; De Meij, A.; Lelieveld, J.

2017-12-01

A global chemistry-climate model has been used to study the impacts of pollutants released by agriculture on fine particulate matter (PM2.5), with a focus on Europe, North America, South and East Asia. Hypothetical reduction of agricultural emission of 50%, 66% and 100% have been simulated and compared with the reference simulation. The simulations results reveal that a relatively strong reduction in PM2.5 levels can be achieved by decreasing agricultural emissions, and this effect can almost be exclusively explain by the reduction of ammonia (NH3) emissions, released from fertilizer use and animal husbandry. The absolute impact on PM2.5 reduction is strongest in East Asia, even for small emission decreases, although the relative reduction is very low (below 13% for a full removal of agricultural emissions) . Conversely, over Europe and North America, aerosol formation is not directly limited by the availability of ammonia. Nevertheless, reduction of NH3 can also substantially decrease PM2.5concentrations over the latter regions, especially when emissions are abated systematically and an ammonia limited regions of aerosol growth is reached. Further, our results document how reduction of agricultural emissions decreases aerosol pH due to the depletion of aerosol ammonium, which affects particle liquid phase and heterogeneous chemistry. It is calculated that ammonia emission controls could reduce the particle pH up to 1.5 pH-units in East Asia during winter, and more than 1.7 pH-units in South Asia, theoretically assuming complete agricultural emission removal, which could have repercussions for the reactive uptake of gases from the gas phase and the outgassing of relative weak acids. It is finally shown that a 50% reduction of agricultural emissions could prevent the mortality attributable to air pollution by 250 thousands people per year worldwide, amounting to reductions of 30%, 19% , 8% and 3% over North America, Europe and South Asia and East Asia, respectively

Emissions reductions from expanding state-level renewable portfolio standards.

Science.gov (United States)

Johnson, Jeremiah X; Novacheck, Joshua

2015-05-05

In the United States, state-level Renewable Portfolio Standards (RPS) have served as key drivers for the development of new renewable energy. This research presents a method to evaluate emissions reductions and costs attributable to new or expanded RPS programs by integrating a comprehensive economic dispatch model and a renewable project selection model. The latter model minimizes incremental RPS costs, accounting for renewable power purchase agreements (PPAs), displaced generation and capacity costs, and net changes to a state's imports and exports. We test this method on potential expansions to Michigan's RPS, evaluating target renewable penetrations of 10% (business as usual or BAU), 20%, 25%, and 40%, with varying times to completion. Relative to the BAU case, these expanded RPS policies reduce the CO2 intensity of generation by 13%, 18%, and 33% by 2035, respectively. SO2 emissions intensity decreased by 13%, 20%, and 34% for each of the three scenarios, while NOx reductions totaled 12%, 17%, and 31%, relative to the BAU case. For CO2 and NOx, absolute reductions in emissions intensity were not as large due to an increasing trend in emissions intensity in the BAU case driven by load growth. Over the study period (2015 to 2035), the absolute CO2 emissions intensity increased by 1% in the 20% RPS case and decreased by 6% and 22% for the 25% and 40% cases, respectively. Between 26% and 31% of the CO2, SO2, and NOx emissions reductions attributable to the expanded RPS occur in neighboring states, underscoring the challenges quantifying local emissions reductions from state-level energy policies with an interconnected grid. Without federal subsidies, the cost of CO2 mitigation using an RPS in Michigan is between $28 and $34/t CO2 when RPS targets are met. The optimal renewable build plan is sensitive to the capacity credit for solar but insensitive to the value for wind power.

Quantified, Localized Health Benefits of Accelerated Carbon Dioxide Emissions Reductions.

Science.gov (United States)

Shindell, Drew; Faluvegi, Greg; Seltzer, Karl; Shindell, Cary

2018-01-01

Societal risks increase as Earth warms, but also for emissions trajectories accepting relatively high levels of near-term emissions while assuming future negative emissions will compensate even if they lead to identical warming [1]. Accelerating carbon dioxide (CO 2 ) emissions reductions, including as a substitute for negative emissions, hence reduces long-term risks but requires dramatic near-term societal transformations [2]. A major barrier to emissions reductions is the difficulty of reconciling immediate, localized costs with global, long-term benefits [3, 4]. However, 2°C trajectories not relying on negative emissions or 1.5°C trajectories require elimination of most fossil fuel related emissions. This generally reduces co-emissions that cause ambient air pollution, resulting in near-term, localized health benefits. We therefore examine the human health benefits of increasing ambition of 21 st century CO 2 reductions by 180 GtC; an amount that would shift a 'standard' 2°C scenario to 1.5°C or could achieve 2°C without negative emissions. The decreased air pollution leads to 153±43 million fewer premature deaths worldwide, with ~40% occurring during the next 40 years, and minimal climate disbenefits. More than a million premature deaths would be prevented in many metropolitan areas in Asia and Africa, and >200,000 in individual urban areas on every inhabited continent except Australia.

Households Willingness to Pay for the Emissions Reduction Policy, Queensland, Australia

Directory of Open Access Journals (Sweden)

Galina Williams

2015-09-01

Full Text Available This study examines households’ willingness to support the emissions reduction policy and their perceptions of climate change using an Internet survey of more than 1,000 households in Queensland, Australia. Respondents were asked for their willingness to pay (WTP to support the emissions reduction target proposed by the Australian Government by paying extra on their electricity bills. The results can be summarized in four key findings. First, respondents’ WTP to support the emissions reduction target is higher if they perceive that climate change will result in high loss of biodiversity. Second, respondents were willing to support a higher emissions target than proposed by the Australian Government. Third, there is a correlation between respondents WTP to support the emissions reduction and their beliefs about climate change, its effect on standards of living, the environment, and future generations. Fourth, as the data show a high rate of zero responses, common for the contingent valuation method (CVM used in the survey, the zero bids were further investigated using the non-parametric Turnbull model and the more recent spike model. The results showed that although there is some support for the emissions reduction policy, it is not sufficient for the policy to be successful.

Costs, emissions reductions, and vehicle repair: evidence from Arizona.

Science.gov (United States)

Ando, A; McConnell, V; Harrington, W

2000-04-01

The Arizona inspection and maintenance (I/M) program provides one of the first opportunities to examine the costs and effectiveness of vehicle emission repair. This paper examines various aspects of emission reductions, fuel economy improvements, and repair costs, drawing data from over 80,000 vehicles that failed the I/M test in Arizona between 1995 and the first half of 1996. We summarize the wealth of data on repair from the Arizona program and highlight its limitations. Because missing or incomplete cost information has been a serious shortcoming for the evaluation of I/M programs, we develop a method for estimating repair costs when they are not reported. We find surprising evidence that almost one quarter of all vehicles that take the I/M test are never observed to pass the test. Using a statistical analysis, we provide some information about the differences between the vehicles that pass and those that do not. Older, more polluting vehicles are much more likely never to pass the I/M test, and their expected repair costs are much higher than those for newer cars. This paper summarizes the evidence on costs and emission reductions in the Arizona program, comparing costs and emissions reductions between cars and trucks. Finally, we examine the potential for more cost-effective repair, first through an analysis of tightening I/M cut points and then by calculating the cost savings of achieving different emission reduction goals when the most cost-effective repairs are made first.

Options for utilizing the CDM for global emission reductions

Energy Technology Data Exchange (ETDEWEB)

Butzengeiger-Geyer, Sonja; Castro, Paula; Harthan, Ralph O.; Hayashi, Daisuke; Healy, Sean; Maribu, Karl Magnus; Michaelowa, Axel; Okubo, Yuri; Schneider, Lambert; Storroe, Ingunn [Zuerich Univ. (Switzerland); Oeko-Institut e.V., Berlin (Germany); Perspectives GmbH, Hamburg (Germany); Point Carbon A/S, Oslo (Norway)

2010-11-15

The study describes and discusses in detail how four CDM reform alternatives, namely discounting of emission reductions, ambitious baselines, purchase and cancellation of CERs and reinvestment of CER levies, could be integrated in a Post-2012 climate regime. The study assesses these alternatives, according to their impacts on GHG emission reductions, contribution to sustainable development, cost-efficiency, technical feasibility, incentives and distributional effects as well as negotiability. The study shows that the introduction of discounting and ambitious baselines is technically feasible but politically a massive challenge. With the help of an economic model the study shows that the introduction of reform alternatives increases the amount of emission reductions but in comparison to the current CDM the impact is rather limited. But a CDM reform can in any case increase the credibility and improve the environmental integrity of the mechanism. (orig.)

Emission reduction trading - a power marketer`s perspective

Energy Technology Data Exchange (ETDEWEB)

Stewart, M. [Powerex Inc., Vancouver, BC (Canada)

1999-10-01

The current situation , and the short-term and long-term outlook in emission reduction trading are reviewed from the point of view of a power marketer. The author`s view is that while the concept of emission reduction credit (ERC) is easy enough to understand, i.e. a series of measures to reduce carbon dioxide production and enhance carbon sequestration, there is no standard definition, although there are a number of models under consideration. What is being sought is clear ownership and title, a clear understanding of what qualifies as a credit, credit for early action, commodity specifications and the ability to hedge. The author predicts that in the short-tem, industry will experiment with different types of transactions to gain experience and seek partners who are willing to share risk and development cost. In the longer-term, emission reduction credits will be bought and sold as commodities and traded, swapped or exchanged as part of a portfolio in bilateral trade transactions, and used in hedging against future liabilities.

Politics for emissions reduction at large combustion plants

International Nuclear Information System (INIS)

Dragos, L.; Persu, I.; Predescu, I.

2005-01-01

This article presents the harmonization process of Romanian national legislation with EU directives for the establishment of measures for the emission reduction of air pollutants from large combustion plants. The quantity of SO 2 , NO x and dust emissions from big combustion installation during the period 1980 - 2003 is given. The characteristics of the native fuels are also presented. Recently a reorganization and restructuring of the electricity production from lignite are accomplished. It is emphasised in the paper that the use of lignite for energy production is necessary even if the additional costs implied by the compliance with Directive 2001/80/EC are high. Clean combustion technologies and equipment promoted by the OVM-ICCPET, Bucharest will be applied for the improvement of the burning process and reduction of the emissions

Nitrous oxide emission reduction in temperate biochar-amended soils

Science.gov (United States)

Felber, R.; Hüppi, R.; Leifeld, J.; Neftel, A.

2012-01-01

Biochar, a pyrolysis product of organic residues, is an amendment for agricultural soils to improve soil fertility, sequester CO2 and reduce greenhouse gas (GHG) emissions. In highly weathered tropical soils laboratory incubations of soil-biochar mixtures revealed substantial reductions for nitrous oxide (N2O) and carbon dioxide (CO2). In contrast, evidence is scarce for temperate soils. In a three-factorial laboratory incubation experiment two different temperate agricultural soils were amended with green waste and coffee grounds biochar. N2O and CO2 emissions were measured at the beginning and end of a three month incubation. The experiments were conducted under three different conditions (no additional nutrients, glucose addition, and nitrate and glucose addition) representing different field conditions. We found mean N2O emission reductions of 60 % compared to soils without addition of biochar. The reduction depended on biochar type and soil type as well as on the age of the samples. CO2 emissions were slightly reduced, too. NO3- but not NH4+ concentrations were significantly reduced shortly after biochar incorporation. Despite the highly significant suppression of N2O emissions biochar effects should not be transferred one-to-one to field conditions but need to be tested accordingly.

Scenario Study on PM emission Reduction in Cement Industry

Science.gov (United States)

Tang, Qian; Chen, Xiaojun; Xia, Xin; Wang, Lijuan; Wang, Huili; Jin, Ling; Yan, Zhen

2018-01-01

Cement industry is one of the high pollution industries in China. Evaluation of the primary particulate matter (PM) emission status and the reduction potential is not only important for our understanding of the effectiveness of current pollution control measures but also vital for future policy design. In this study, PM emitted from cement producing process in 2014 was calculated using an emission factor method. Three PM emission control scenarios were set up considering source control, process management and end-of-pipe treatment, and the PM emission reduction by 2020 under the three scenarios was predicted, respectively. In 2014, the primary PM emission from cement industry was 1.95 million tons. By 2020, the productions of cement and clinker were expected to increase by 12% and 7%, respectively, and the PM emission would increase by about 10%. By implementation of GB4915-2013 and comprehensive control of fugitive PM emission, the PM emission would probably be reduced by 34%. Another 7% decrease would be expected from source control. The second scenario can be considered as an assessment of the effectiveness of the revised emission standard, and this research can be used as a technical support to the environmental management authorities to make relevant policies.

Search for Gamma-Ray Emission from DES Dwarf Spheroidal Galaxy Candidates with Fermi-LAT Data

Energy Technology Data Exchange (ETDEWEB)

Drlica-Wagner, A.; et al.

2015-08-04

Due to their proximity, high dark-matter (DM) content, and apparent absence of non-thermal processes, Milky Way dwarf spheroidal satellite galaxies (dSphs) are excellent targets for the indirect detection of DM. Recently, eight new dSph candidates were discovered using the first year of data from the Dark Energy Survey (DES). We searched for gamma-ray emission coincident with the positions of these new objects in six years of Fermi Large Area Telescope data. We found no significant excesses of gamma-ray emission. Under the assumption that the DES candidates are dSphs with DM halo properties similar to the known dSphs, we computed individual and combined limits on the velocity-averaged DM annihilation cross section for these new targets. If the estimated DM content of these dSph candidates is confirmed, they will constrain the annihilation cross section to lie below the thermal relic cross section for DM particles with masses $\\lesssim 20\\,\\mathrm{GeV}$ annihilating via the $b\\bar{b}$ or τ(+)τ(-) channels.

Impact of agricultural emission reductions on fine-particulate matter and public health

Science.gov (United States)

Pozzer, Andrea; Tsimpidi, Alexandra P.; Karydis, Vlassis A.; de Meij, Alexander; Lelieveld, Jos

2017-10-01

A global chemistry-climate model has been used to study the impacts of pollutants released by agriculture on fine-particulate matter (PM2.5), with a focus on Europe, North America, East and South Asia. Simulations reveal that a relatively strong reduction in PM2.5 levels can be achieved by decreasing agricultural emissions, notably of ammonia (NH3) released from fertilizer use and animal husbandry. The absolute impact on PM2.5 reduction is strongest in East Asia, even for small emission decreases. Conversely, over Europe and North America, aerosol formation is not immediately limited by the availability of ammonia. Nevertheless, reduction of NH3 can also substantially decrease PM2.5 concentrations over the latter regions, especially when emissions are abated systematically. Our results document how reduction of agricultural emissions decreases aerosol pH due to the depletion of aerosol ammonium, which affects particle liquid phase and heterogeneous chemistry. Further, it is shown that a 50 % reduction of agricultural emissions could prevent the mortality attributable to air pollution by ˜ 250 000 people yr-1 worldwide, amounting to reductions of 30, 19, 8 and 3 % over North America, Europe, East and South Asia, respectively. A theoretical 100 % reduction could even reduce the number of deaths globally by about 800 000 per year.

Role of natural gas in meeting an electric sector emissions reduction strategy and effects on greenhouse gas emissions

International Nuclear Information System (INIS)

Lenox, Carol; Kaplan, P. Ozge

2016-01-01

With advances in natural gas extraction technologies, there is an increase in the availability of domestic natural gas, and natural gas is gaining a larger share of use as a fuel in electricity production. At the power plant, natural gas is a cleaner burning fuel than coal, but uncertainties exist in the amount of methane leakage occurring upstream in the extraction and production of natural gas. At higher leakage levels, the additional methane emissions could offset the carbon dioxide emissions reduction benefit of switching from coal to natural gas. This analysis uses the MARKAL linear optimization model to compare the carbon emissions profiles and system-wide global warming potential of the U.S. energy system over a series of model runs in which the power sector is required to meet a specific carbon dioxide reduction target across a number of scenarios in which the availability of natural gas changes. Scenarios are run with carbon dioxide emissions and a range of upstream methane emission leakage rates from natural gas production along with upstream methane and carbon dioxide emissions associated with production of coal and oil. While the system carbon dioxide emissions are reduced in most scenarios, total carbon dioxide equivalent emissions show an increase in scenarios in which natural gas prices remain low and, simultaneously, methane emissions from natural gas production are higher. - Highlights: • MARKAL analysis of energy system GHG emissions reduction scenarios. • High methane leakage can eliminate the benefit that natural gas brings over coal. • A robust GHG reduction strategy takes into account upstream emissions for all fuels.

Technical and Economic Aspects of Low Emission Reduction in Poland

Science.gov (United States)

Dzikuć, M.; Łasiński, K.

2017-12-01

The paper presents the problem of excessive air pollution in Poland caused mainly by low emission. The emission arises in result of heating flats by means of old and energetically inefficient heating installations. In Poland and Bulgaria the inhaled air is of the worst quality out of all EU countries. The paper presents economic and technical problems related to low emission occurring during the combustion of solid fuels in local boiler houses. Furthermore, the most significant economic issues, connected with the reduction of low emission are discussed, as well as technological possibilities of efficient reduction of the amount of pollution in the atmosphere. Conclusions are presented at the end of the article.

Achieving CO2 Emissions Reduction Goals with Energy Infrastructure Projects

International Nuclear Information System (INIS)

Eberlinc, M.; Medved, K.; Simic, J.

2013-01-01

The EU has set its short-term goals in the Europe 2020 Strategy (20% of CO 2 emissions reduction, 20% increase in energy efficiency, 20% share of renewables in final energy). The analyses show that the EU Member States in general are on the right track of achieving these goals; they are even ahead (including Slovenia). But setting long-term goals by 2050 is a tougher challenge. Achieving CO 2 emissions reduction goes hand in hand with increasing the share of renewables and strategically planning the projects, which include exploiting the potential of renewable sources of energy (e.g. hydropower). In Slovenia, the expected share of hydropower in electricity production from large HPPs in the share of renewables by 2030 is 1/3. The paper includes a presentation of a hydro power plants project on the middle Sava river in Slovenia and its specifics (influenced by the expansion of the Natura 2000 protected sites and on the other hand by the changes in the Environment Protection Law, which implements the EU Industrial Emissions Directive and the ETS Directive). Studies show the importance of the HPPs in terms of CO 2 emissions reduction. The main conclusion of the paper shows the importance of energy infrastructure projects, which contribute to on the one hand the CO 2 emissions reduction and on the other the increase of renewables.(author)

Carbon emission reduction targeting through process integration and fuel switching with mathematical modeling

International Nuclear Information System (INIS)

Tiew, B.J.; Shuhaimi, M.; Hashim, H.

2012-01-01

Highlights: ► CO 2 emissions reduction targeting for existing plant were categorized into three groups. ► Model for CO 2 emissions reduction targeting via combination approach was developed. ► Effect of combination approach onto HEN area efficiency was discussed. ► Proposed execution strategy can avoid HEN area efficiency deterioration. -- Abstract: Carbon emission reduction targeting is an important and effective effort for industry to contribute in controlling greenhouse gases concentration in atmosphere. Graphical approach has been proposed for CO 2 emissions reduction targeting via HEN retrofit and fuel switching. However, it involves potentially time consuming manual procedures and the quality of solutions produced greatly depends on designer’s experience and judgment. Besides, graphical approach hardly account for the cost factor during the design phase, thus potentially generate complex design. This paper introduces an MINLP model for simultaneous CO 2 emissions reduction targeting via fuel switching and HEN retrofit. A sequential model execution was proposed along with the proposed model. The application of the model on a crude preheat train case study has demonstrated its workability to generate optimal solution for targeted CO 2 emissions reduction at minimum payback period.

Impact of agricultural emission reductions on fine-particulate matter and public health

Directory of Open Access Journals (Sweden)

A. Pozzer

2017-10-01

Full Text Available A global chemistry-climate model has been used to study the impacts of pollutants released by agriculture on fine-particulate matter (PM2.5, with a focus on Europe, North America, East and South Asia. Simulations reveal that a relatively strong reduction in PM2.5 levels can be achieved by decreasing agricultural emissions, notably of ammonia (NH3 released from fertilizer use and animal husbandry. The absolute impact on PM2.5 reduction is strongest in East Asia, even for small emission decreases. Conversely, over Europe and North America, aerosol formation is not immediately limited by the availability of ammonia. Nevertheless, reduction of NH3 can also substantially decrease PM2.5 concentrations over the latter regions, especially when emissions are abated systematically. Our results document how reduction of agricultural emissions decreases aerosol pH due to the depletion of aerosol ammonium, which affects particle liquid phase and heterogeneous chemistry. Further, it is shown that a 50 % reduction of agricultural emissions could prevent the mortality attributable to air pollution by  ∼ 250 000 people yr−1 worldwide, amounting to reductions of 30, 19, 8 and 3 % over North America, Europe, East and South Asia, respectively. A theoretical 100 % reduction could even reduce the number of deaths globally by about 800 000 per year.

Emission Reduction Potential with the Renewal of the Vehicle Fleet in Croatia

International Nuclear Information System (INIS)

Zidov, B.; Brlek, G.; Brajkovic, J.; Karan, M.

2015-01-01

The European Union has identified the typical areas of application of measures to tackle the problem of pollutants emissions into the air. Road transport is recognized as the largest polluter of the environment and an increase in CO2 emissions is most difficult to suppress in this type of transport. Looking at the projected trend of emission reductions in Croatia, it is clear that for achieving the minimum targets by 2050, as proposed by the European Union, implementation of the very strong measures in the coming period will be inevitable. The main aim of the paper refers to the analysis of potential emission reduction of pollutants generated by passenger vehicles registered in Croatia, assuming the implementation of measures that will result in technological renewal of the fleet at the national level. Generally considering, passenger cars before the Euro 1 standard, Euro 1 and Euro 2 standards together emit nearly 40 percent of all CO2 emissions generated by passenger cars registered in Croatia. Assuming replacement of all cars up to and including Euro 2, with Euro 6 vehicles, and taking into account certain assumptions, the potential reductions in emissions of NOx, CO, CH4 and particles were quantified. The potential reduction in NOx emissions is approximately 3,061 tons, in CO emissions approximately 14482 tons, in CH4 approximately 114 tons and in particulate matter approximately 257 tons. Depending on the engine size, with the replacement of the typical gasoline 20 years old passenger vehicle with the new one, without changing the driving mode, annual savings of up to 209 liters of gasoline fuel and reduction of CO2 emissions by 475 kg could be achieved (according to the assumptions described in the paper). With the replacement of diesel vehicles under the same conditions, the savings of up to 311 liters of diesel fuel annually and reduction of CO2 emissions by 815 kg could be achieved. (author).

Reduction of CO{sub 2} emission and oil dependency with biomass-based polygeneration

Energy Technology Data Exchange (ETDEWEB)

Joelsson, Jonas M; Gustavsson, Leif [Ecotechnology and Environmental Science, Department of Engineering and Sustainable Development, Mid Sweden University, SE-831 25 Oestersund (Sweden)

2010-07-15

We compare different options for the use of lignocellulosic biomass to reduce CO{sub 2} emission and oil use, focusing on polygeneration of biomass-based motor fuels and electricity, and discuss methodological issues related to such comparisons. The use of biomass can significantly reduce CO{sub 2} emission and oil use, but there is a trade-off between the reductions in CO{sub 2} emission and oil use. Bioelectricity from stand-alone plants replacing coal-based electricity reduced CO{sub 2} emission by 99 kg per GJ biomass input but gave no oil use reduction. Stand-alone produced methanol replacing diesel reduced the CO{sub 2} emission with 38 kg and the oil use with 0.67 GJ per GJ biomass, indicating that a potential CO{sub 2} emission reduction of 90 kg is lost per GJ oil reduced. CO{sub 2} emission and oil use reduction for alternatives co-producing fuel and electricity fall between the stand-alone alternatives. Plug-in hybrid-electric vehicles using bioelectricity reduced CO{sub 2} emission by 75-88 kg and oil use by 0.99-1.2 GJ, per GJ biomass input. Biomass can also reduce CO{sub 2} emission and/or oil use more efficiently if fossil-fuel-fired boilers or electric heating is replaced by district heating from biomass-based combined heat and power generation. This is also true if electricity or motor fuel is produced from black liquor gasification in pulp mills or if wood is used instead of concrete in building construction. Biomass gasification is an important technology to achieve large reductions, irrespective of whether CO{sub 2} emission or oil use reduction is prioritised. (author)

A Summary of Research on Energy Saving and Emission Reduction of Transportation

Science.gov (United States)

Cheng, Dongxiang; Wu, Lufen

2017-12-01

Road transport is an important part of transportation, and road in the field of energy-saving emission reduction is a very important industry. According to the existing problems of road energy saving and emission reduction, this paper elaborates the domestic and international research on energy saving and emission reduction from three aspects: road network optimization, pavement material and pavement maintenance. Road network optimization may be overlooked, and the research content is still relatively preliminary; pavement materials mainly from the asphalt pavement temperature mixed asphalt technology research; pavement maintenance technology development is relatively comprehensive.

Achieving carbon emission reduction through industrial and urban symbiosis: A case of Kawasaki

International Nuclear Information System (INIS)

Dong, Huijuan; Ohnishi, Satoshi; Fujita, Tsuyoshi; Geng, Yong; Fujii, Minoru; Dong, Liang

2014-01-01

Industry and fossil fuel combustion are the main sources for urban carbon emissions. Most studies focus on energy consumption emission reduction and energy efficiency improvement. Material saving is also important for carbon emission reduction from a lifecycle perspective. IS (Industrial symbiosis) and U r S (urban symbiosis) have been effective since both of them encourage byproduct exchange. However, quantitative carbon emission reduction evaluation on applying them is still lacking. Consequently, the purpose of this paper is to fill such a gap through a case study in Kawasaki Eco-town, Japan. A hybrid LCA model was employed to evaluate to the lifecycle carbon footprint. The results show that lifecycle carbon footprints with and without IS and U r S were 26.66 Mt CO 2 e and 30.92 Mt CO 2 e, respectively. The carbon emission efficiency was improved by 13.77% with the implementation of IS and U r S. The carbon emission reduction was mainly from “iron and steel” industry, cement industry and “paper making” industry, with figures of 2.76 Mt CO 2 e, 1.16 Mt CO 2 e and 0.34 Mt CO 2 e, respectively. Reuse of scrape steel, blast furnace slag and waste paper are all effective measures for promoting carbon emission reductions. Finally, policy implications on how to further promote IS and U r S are presented. - Highlights: • We evaluate carbon emission reduction of industrial and urban symbiosis (IS/U r S). • Hybrid LCA model was used to evaluate lifecycle carbon footprint. • Carbon emission efficiency was improved by 13.77% after applying IS/U r S. • The importance of U r S in responding carbon reduction was addressed in the paper

The economic payoff for global warming emissions reduction

International Nuclear Information System (INIS)

Shelton, Sam V.; Schaefer, Laura A.

1999-01-01

In order to meet the 1997 Kyoto treaty targets, U.S. carbon emissions must be severely curtailed. While top-down economic models predict that cutting carbon emissions will produce high costs, higher efficiency technology, such as residential electric heat pump water heaters, can cause carbon reduction to become profitable. In a single-family residence, replacing an electric resistance water heater with a heat pump water heater can reduce carbon emissions by 0.6 tons per year and produce savings of $1200 over a twelve-year period., rather than costs. National implementation of this single technology would reduce electric power plant carbon emissions by 5 percent. (Author)

GHG emission scenarios in Asia and the world: The key technologies for significant reduction

International Nuclear Information System (INIS)

Akashi, Osamu; Hijioka, Yasuaki; Masui, Toshihiko; Hanaoka, Tatsuya; Kainuma, Mikiko

2012-01-01

In this paper, we explore GHG emission scenarios up to 2050 in Asia and the world as part of the Asian Modeling Exercise and assess technology options for meeting a 2.6 W/m 2 radiative forcing target using AIM/Enduse[Global] and AIM/Impact[Policy]. Global GHG emissions in 2050 are required to be reduced by 72% relative to a reference scenario, which corresponds to a 57% reduction from the 2005 level, in order to meet the above target. Energy intensity improvement contributes a lot to curbing CO 2 emission in the short-term. Meanwhile, carbon intensity reduction and CO 2 capture play a large role for further emission reduction in the mid to long-term. The top five key technologies in terms of reduction amount are CCS, solar power generation, wind power generation, biomass power generation and biofuel, which, in total, account for about 60% of global GHG emissions reduction in 2050. We implement additional model runs, each of which enforced limited availability of one of the key technology. The result shows that the 2.6 W/m 2 target up to 2050 is achievable even if availability of any one of the key technologies is limited to half the level achieved in the default simulation. However, if the use of CCS or biomass is limited, the cumulative GHG abatement cost until 2050 increases considerably. Therefore CCS and biomass have a vital role in curbing costs to achieve significant emission reductions. - Highlights: ► We explore GHG emission scenarios up to 2050 in Asia and the world. ► Significant GHG emission reduction is required to limit radiative forcing at low level. ► We assess technology options for achieving significant GHG emission reduction. ► CCS, solar power, wind power, and biomass are the key technologies for reduction. ► Especially, CCS and biomass play a vital role in curbing costs to achieve significant emission reductions.

Emission reduction trading - a power marketer's perspective

Energy Technology Data Exchange (ETDEWEB)

Stewart, M. (Powerex Inc., Vancouver, BC (Canada))

1999-01-01

The current situation , and the short-term and long-term outlook in emission reduction trading are reviewed from the point of view of a power marketer. The author's view is that while the concept of emission reduction credit (ERC) is easy enough to understand, i.e. a series of measures to reduce carbon dioxide production and enhance carbon sequestration, there is no standard definition, although there are a number of models under consideration. What is being sought is clear ownership and title, a clear understanding of what qualifies as a credit, credit for early action, commodity specifications and the ability to hedge. The author predicts that in the short-tem, industry will experiment with different types of transactions to gain experience and seek partners who are willing to share risk and development cost. In the longer-term, emission reduction credits will be bought and sold as commodities and traded, swapped or exchanged as part of a portfolio in bilateral trade transactions, and used in hedging against future liabilities.

Analysis of CO2 emissions reduction in the Malaysian transportation sector: An optimisation approach

International Nuclear Information System (INIS)

Mustapa, Siti Indati; Bekhet, Hussain Ali

2016-01-01

The demand for transport services is expected to rise, causing the CO 2 emissions level to increase as well. In Malaysia, the transportation sector accounts for 28% of total CO 2 emissions, of which 85% comes from road transport. By 2020, Malaysia is targeting a reduction in CO 2 emissions intensity by up to 40% and in this effort the role of road transport is paramount. This paper attempts to investigate effective policy options that can assist Malaysia in reducing the CO 2 emissions level. An Optimisation model is developed to estimate the potential CO 2 emissions mitigation strategies for road transport by minimising the CO 2 emissions under the constraint of fuel cost and demand travel. Several mitigation strategies have been applied to analyse the effect of CO 2 emissions reduction potential. The results demonstrate that removal of fuel price subsidies can result in reductions of up to 652 ktonnes of fuel consumption and CO 2 emissions can be decreased by 6.55%, which would enable Malaysia to hit its target by 2020. CO 2 emissions can be reduced significantly, up to 20%, by employing a combination of mitigation policies in Malaysia. This suggests that appropriate mitigation policies can assist the country in its quest to achieve the CO 2 emissions reduction target. - Highlights: • An optimisation model for CO 2 emissions reduction in Malaysia's road transport is formulated. • Sensible policy options to achieve the CO 2 emissions reduction target are provided. • Increase in fuel price has induced shift towards fuel efficient vehicles. • The CO 2 emissions can be reduced up to 5.7 MtCO 2 with combination of mitigation policies.

Calculation and reduction of the sound emissions of overhead power lines

International Nuclear Information System (INIS)

Straumann, U.

2007-01-01

In this dissertation, Ulrich Straumann of the Swiss Federal Institute of Technology in Zurich, Switzerland, discusses the reduction of sound emissions from overhead power lines. Corona-discharges occur during wet weather or when foggy or icing conditions prevail. Apart from these wide-band crackling noises, low-frequency, tonal emissions also occur. The CONOR (Corona Noise Reduction) project examined these emissions at a frequency of twice the mains frequency and looked for economically feasible solutions to the problems caused by them. The source of these emissions and the mechanisms causing them are discussed. Also, ways of calculating their strength are presented. The effects of varying cable geometry and construction are discussed, as are hydrophilic coatings that could be used to reduce sound emissions.

Carbon emissions reduction in China's food industry

International Nuclear Information System (INIS)

Lin, Boqiang; Lei, Xiaojing

2015-01-01

In this paper, we evaluate the changes in carbon dioxide emissions from energy consumption in China's food industry from 1986 to 2010 based on the Logarithmic Mean Divisia Index (LMDI) method. The results show that energy intensity (EI) and industrial activity (IA) are the main determinants of the changes in carbon dioxide. Energy intensity (EI) contributes to decrease in emissions within 25 years while industrial activity (IA) acts in a positive way to increase the emissions level. Industry scale (IS) mostly contributes to increase in emissions except for the time interval 1996–2000. However, for both carbon intensity (CI) and energy structure (ES), they have a volatile but not significant influence on emissions in the different time intervals. To further understand the effects, we analyze the cumulative emission during the whole period 1986–2010. The results further testify that energy intensity and industrial activity are the most important factors affecting reduction and growth of carbon emissions. The results indicate that efforts to reduce emission in China's food industry should focus on the enhancement of energy efficiency, the optimization of industrial scale and the restructuring energy use. Finally, recommendations are provided for the reduction of carbon dioxide in China's food industry. - Highlights: • We analyze the energy consumption and CO 2 emissions in China's food industry. • LMDI decomposition analysis is conducted for finding out the driving forces. • Industrial activity is the main driving force of CO 2 emissions in this industry. • Energy intensity is the main factor mitigating carbon emissions in this industry. • Main advice: improving energy efficiency, optimizing industrial scale.

Reduction of greenhouse gas emissions in the rape cultivation with special consideration of nitrogen fertilization

International Nuclear Information System (INIS)

Heilmann, Hubert; Riemer, Doerte

2017-01-01

Involved into the research project ''Mitigation of greenhouse gas emissions in oilseed rape cropping with special consideration of nitrogen fertilizing'' regional specific GHG cropping emissions according to benchmark and regional experts are calculated by using a calculation method developed in cooperation with IFEU and according to IPCC (2006). The following results are achieved for 35 German NUTS2-regions: - nitrogen fertilization is the main influence for GHG emission reduction; - the use of low-emission nitrogen fertilizers is worth for GHG emission reduction; - without increasing the nutrient efficiency of organic fertilizers, GHG emission reductions are difficult to achieve in many regions; - GHG emission reduction/climate protection and realization of the WRRL or N-Saldo reduction come up to the same aim; - economic consequences of restrictive carbon mitigation can be compensated by slight price surcharges for certified raw material.

The potentional of renewable energy sources for greenhouse gases emissions reduction in Macedonia

Directory of Open Access Journals (Sweden)

Dedinec Aleksandar

2012-01-01

Full Text Available As European Union (EU candidate country, Macedonia is in the process of adoption of the EU strategic energy policies, harmonization of the national legislation with the EU legislation and defining the respective national goals. In this regard, the government has recently adopted a National Strategy for Utilization of Renewable Energy Sources (RES, prepared by ICEIM-MANU. The main goal of this paper is to assess the potential for greenhouse gases (GHG emissions reduction by implementation of 21%-RES-scenarios from the Strategy. The corresponding emissions reduction is calculated against the baseline (reference scenario developed within the Second National Communication on Climate Change. Furthermore, all potential RES technologies are analyzed from economic aspect and combined in a form of emissions reduction cost curve, displaying the total marginal cost of the GHG emissions reduction by RES. Finally, on the bases of the environmental and economic effectiveness of the considered RES technologies, as well as taking into account the country specific barriers, the priority actions for GHG emissions reduction are identified.

E.U.: better emission reduction than expected

International Nuclear Information System (INIS)

Anon.

2010-01-01

The 15 countries that formed the European Union at the time of the Kyoto protocol implementation, compelled themselves to reduce by 8%, on average and per year for the 2008-2012 period and with reference to a standard year that was for most European countries 1990, their greenhouse gas emissions. The European Union has recently stated that the reduction will be better than expected and will reach 14.2% on average per year if the member states realize their projects concerning reforestation or the purchase of international carbon emission allowances. (A.C.)

A healthy reduction in oil consumption and carbon emissions

International Nuclear Information System (INIS)

Higgins, P.A.T.; Higgins, Millicent

2005-01-01

Reliance on oil as an energy source for private transportation produces increasingly unfavorable social, political and environmental conditions including climate change, dependence on foreign oil, and the need for difficult choices between oil production and protection of biological systems. At the same time, the population is increasingly sedentary due largely to our reliance on the automobile for transportation. Adoption and maintenance of healthy weights and healthier lifestyles by substituting walking or biking for short trips currently taken by car could simultaneously improve health and reduce oil consumption and carbon dioxide emissions. We calculate the reduction in oil consumption and carbon dioxide emissions possible in the United States if (1) obese and overweight conditions were eliminated from the adult population through the use of walking or biking for transportation, and (2) individuals between the ages of 10 and 64 adopted previously recommended levels of daily exercise by walking or biking instead of driving. Substantial co-benefits accompany widespread adoption of physical activity. Assuming substitution of cycling for driving, the reduction in gasoline demand is equivalent to 34.9% of current domestic oil consumption. This constitutes considerably more oil than is recoverable from the Arctic National Wildlife Refuge. The concomitant reduction in US carbon dioxide emissions would constitute approximately 10.9% relative to 1990 net US emissions and would be a substantial step toward satisfying the Kyoto Protocol

A healthy reduction in oil consumption and carbon emissions

Energy Technology Data Exchange (ETDEWEB)

Higgins, P.A.T. [Stanford Univ., CA (United States). Dept. of Biological Sciences; Higgins, M. [Michigan Univ., Ann Arbor, MI (United States). School of Public Health

2005-01-01

Reliance on oil as an energy source for private transportation produces increasingly unfavorable social, political and environmental conditions including climate change, dependence on foreign oil, and the need for difficult choices between oil production and protection of biological systems. At the same time, the population is increasingly sedentary due largely to our reliance on the automobile for transportation. Adoption and maintenance of healthy weights and healthier lifestyles by substituting walking or biking for short trips currently taken by car could simultaneously improve health and reduce oil consumption and carbon dioxide emissions. We calculate the reduction in oil consumption and carbon dioxide emissions possible in the United States if (1) obese and overweight conditions were eliminated from the adult population through the use of walking or biking for transportation, and (2) individuals between the ages of 10 and 64 adopted previously recommended levels of daily exercise by walking or biking instead of driving. Substantial co-benefits accompany widespread adoption of physical activity. Assuming substitution of cycling for driving, the reduction in gasoline demand is equivalent to 34.9% of current domestic oil consumption. This constitutes considerably more oil than is recoverable from the Arctic National Wildlife Refuge. The concomitant reduction in US carbon dioxide emissions would constitute approximately 10.9% relative to 1990 net US emissions and would be a substantial step toward satisfying the Kyoto Protocol. (author)

Estimated emission reductions from California's enhanced Smog Check program.

Science.gov (United States)

Singer, Brett C; Wenzel, Thomas P

2003-06-01

The U.S. Environmental Protection Agency requires that states evaluate the effectiveness of their vehicle emissions inspection and maintenance (I/M) programs. This study demonstrates an evaluation approach that estimates mass emission reductions over time and includes the effect of I/M on vehicle deterioration. It includes a quantitative assessment of benefits from pre-inspection maintenance and repairs and accounts for the selection bias effect that occurs when intermittent high emitters are tested. We report estimates of one-cycle emission benefits of California's Enhanced Smog Check program, ca. 1999. Program benefits equivalent to metric tons per day of prevented emissions were calculated with a "bottom-up" approach that combined average per vehicle reductions in mass emission rates (g/gal) with average per vehicle activity, resolved by model year. Accelerated simulation mode test data from the statewide vehicle information database (VID) and from roadside Smog Check testing were used to determine 2-yr emission profiles of vehicles passing through Smog Check and infer emission profiles that would occur without Smog Check. The number of vehicles participating in Smog Check was also determined from the VID. We estimate that in 1999 Smog Check reduced tailpipe emissions of HC, CO, and NO(x) by 97, 1690, and 81 t/d, respectively. These correspond to 26, 34, and 14% of the HC, CO, and NO(x) that would have been emitted by vehicles in the absence of Smog Check. These estimates are highly sensitive to assumptions about vehicle deterioration in the absence of Smog Check. Considering the estimated uncertainty in these assumptions yields a range for calculated benefits: 46-128 t/d of HC, 860-2200 t/d of CO, and 60-91 t/d of NO(x). Repair of vehicles that failed an initial, official Smog Check appears to be the most important mechanism of emission reductions, but pre-inspection maintenance and repair also contributed substantially. Benefits from removal of nonpassing

Potential energy savings and CO2 emissions reduction of China's cement industry

International Nuclear Information System (INIS)

Ke, Jing; Zheng, Nina; Fridley, David; Price, Lynn; Zhou, Nan

2012-01-01

This study analyzes current energy and carbon dioxide (CO 2 ) emission trends in China's cement industry as the basis for modeling different levels of cement production and rates of efficiency improvement and carbon reduction in 2011–2030. Three cement output projections are developed based on analyses of historical production and physical and macroeconomic drivers. For each of these three production projections, energy savings and CO 2 emission reduction potentials are estimated in a best practice scenario and two continuous improvement scenarios relative to a frozen scenario. The results reveal the potential for cumulative final energy savings of 27.1 to 37.5 exajoules and energy-related direct emission reductions of 3.2 to 4.4 gigatonnes in 2011–2030 under the best practice scenarios. The continuous improvement scenarios produce cumulative final energy savings of 6.0 to 18.9 exajoules and reduce CO 2 emissions by 1.0 to 2.4 gigatonnes. This analysis highlights that increasing energy efficiency is the most important policy measure for reducing the cement industry's energy and emissions intensity, given the current state of the industry and the unlikelihood of significant carbon capture and storage before 2030. In addition, policies to reduce total cement production offer the most direct way of reducing total energy consumption and CO 2 emissions. - Highlights: ► This study models output and efficiency improvements in Chinese cement industry from 2011–2030. ► Energy savings and CO 2 emission reductions estimated for 3 scenarios relative to frozen scenario. ► Results reveal cumulative final energy savings potential of 27.1–37.5 EJ and 3.2–4.4 Gt CO 2 reductions. ► Increasing efficiency is the most important policy for reducing cement energy and emissions intensity.

Reductions in greenhouse gas emissions and cost by shipping at lower speeds

International Nuclear Information System (INIS)

Lindstad, Haakon; Asbjornslett, Bjorn E.; Stromman, Anders H.

2011-01-01

CO 2 emissions from maritime transport represent a significant part of total global greenhouse gas (GHG) emissions. According to the International Maritime Organization (), maritime transport emitted 1046 million tons (all tons are metric) of CO 2 in 2007, representing 3.3% of the world's total CO 2 emissions. The International Maritime Organization (IMO) is currently debating both technical and market-based measures for reducing greenhouse gas emissions from shipping. This paper presents investigations on the effects of speed reductions on the direct emissions and costs of maritime transport, for which the selection of ship classes was made to facilitate an aggregated representation of the world fleet. The results show that there is a substantial potential for reducing CO 2 emissions in shipping. Emissions can be reduced by 19% with a negative abatement cost (cost minimization) and by 28% at a zero abatement cost. Since these emission reductions are based purely on lower speeds, they can in part be performed now. - Highlights: → We investigates the effects of speed reductions for maritime transport. → The selection of ship classes represent the words fleet. → The transport volumes are kept constant. → The model includes both cost and emissions as a function of speed. → The results show that there is a substantial potential for reducing CO 2 emissions from shipping.

Papers of the Canadian Institute conference: Reduction, management and trading of greenhouse gas emissions

International Nuclear Information System (INIS)

2003-01-01

This conference provided an opportunity for experts from various fields to discuss and exchange views and the latest information on a wide range of topics related to the reduction, management and trading of greenhouse gas emissions. The papers dealt with pertinent issues such as: (1) short and long term impacts of the Kyoto Protocol ratification for industries operating in Quebec, necessary changes and required investment, (2) calculation mechanisms for the allocation of permits, audit systems for the reduction and registration of emissions, (3) Canadian and international emission trading market, opportunities and associated risks, (4) preparation of an emission trading contract, (5) the establishment of a greenhouse gas (GHG) emission reduction and management system within companies, and (6) measures implemented by governments to assist industry in meeting emission reduction targets. Of the sixteen papers presented at the conference, 4 have been processed separately for inclusion in this database. refs., tabs., figs

Application research on big data in energy conservation and emission reduction of transportation industry

Science.gov (United States)

Bai, Bingdong; Chen, Jing; Wang, Mei; Yao, Jingjing

2017-06-01

In the context of big data age, the energy conservation and emission reduction of transportation is a natural big data industry. The planning, management, decision-making of energy conservation and emission reduction of transportation and other aspects should be supported by the analysis and forecasting of large amounts of data. Now, with the development of information technology, such as intelligent city, sensor road and so on, information collection technology in the direction of the Internet of things gradually become popular. The 3G/4G network transmission technology develop rapidly, and a large number of energy conservation and emission reduction of transportation data is growing into a series with different ways. The government not only should be able to make good use of big data to solve the problem of energy conservation and emission reduction of transportation, but also to explore and use a large amount of data behind the hidden value. Based on the analysis of the basic characteristics and application technology of energy conservation and emission reduction of transportation data, this paper carries out its application research in energy conservation and emission reduction of transportation industry, so as to provide theoretical basis and reference value for low carbon management.

The improvement of CO2 emission reduction policies based on system dynamics method in traditional industrial region with large CO2 emission

International Nuclear Information System (INIS)

Li, Fujia; Dong, Suocheng; Li, Zehong; Li, Yu; Li, Shantong; Wan, Yongkun

2012-01-01

Some traditional industrial regions are characterized by high industrial proportion and large CO 2 emission. They are facing dual pressures of maintaining economic growth and largely reducing CO 2 emission. From the perspective of study of typological region, taking the typical traditional industrial region—Liaoning Province of China as a case, this study establishes a system dynamics model named EECP and dynamically simulates CO 2 emission trends under different conditions. Simulation results indicate, compared to the condition without CO 2 emission reduction policies, CO 2 emission intensity under the condition of implementing CO 2 emission reduction policies of “Twelfth Five-Year Plan” is decreased by 11% from 2009 to 2030, but the economic cost is high, making the policies implementation faces resistance. Then some improved policies are offered and proved by EECP model that they can reduce CO 2 emission intensity after 2021 and decrease the negative influence to GDP, realizing the improvement objects of reducing CO 2 emission and simultaneously keeping a higher economy growth speed. The improved policies can provide reference for making and improving CO 2 emission reduction policies in other traditional industrial regions with large CO 2 emission. Simultaneously, EECP model can provide decision-makers with reference and help for similar study of energy policy. - Highlights: ► We build EECP model for CO 2 emission reduction study in traditional industry region. ► By the model, we simulate CO 2 emission trend and improve emission reduction policy. ► By improvement, both CO 2 emission intensity and economic cost can be largely reduced. ► Besides CO 2 emission is reduced effectively, higher GDP increment speed is kept. ► EECP model can be widely used for making and improving regional energy policies.

Investigation of CO2 emission reduction strategy from in-use gasoline vehicle

Science.gov (United States)

Choudhary, Arti; Gokhale, Sharad

2016-04-01

On road transport emissions is kicking off in Indian cities due to high levels of urbanization and economic growth during the last decade in Indian subcontinent. In 1951, about 17% of India's population were living in urban areas that increased to 32% in 2011. Currently, India is fourth largest Green House Gas (GHG) emitter in the world, with its transport sector being the second largest contributor of CO2 emissions. For achieving prospective carbon reduction targets, substantial opportunity among in-use vehicle is necessary to quantify. Since, urban traffic flow and operating condition has significant impact on exhaust emission (Choudhary and Gokhale, 2016). This study examined the influence of vehicular operating kinetics on CO2 emission from predominant private transportation vehicles of Indian metropolitan city, Guwahati. On-board instantaneous data were used to quantify the impact of CO2 emission on different mileage passenger cars and auto-rickshaws at different times of the day. Further study investigates CO2 emission reduction strategies by using International Vehicle Emission (IVE) model to improve co-benefit in private transportation by integrated effort such as gradual phase-out of inefficient vehicle and low carbon fuel. The analysis suggests that fuel type, vehicles maintenance and traffic flow management have potential for reduction of urban sector GHG emissions. Keywords: private transportation, CO2, instantaneous emission, IVE model Reference Choudhary, A., Gokhale, S. (2016). Urban real-world driving traffic emissions during interruption and congestion. Transportation Research Part D: Transport and Environment 43: 59-70.

Olympic Games promote the reduction in emissions of greenhouse gases in Beijing

International Nuclear Information System (INIS)

Wu Jisong; Zhang Yongjie

2008-01-01

Global climate change is one of the most serious global environmental problems faced by humankind at present. Serious attention should be paid and precautions should be taken before disasters occur. The amount of CO 2 emissions in China has increased during the past few years and the Chinese government and people have attached great importance to this phenomenon and treated it seriously. With the instruction of scientific development viewpoint, Beijing has made significant progress in emissions reduction through technological innovation, industrial structure adjustment, promoting energy efficiency and utilization of renewable energy, and absorption of CO 2 using forest and wetland, since bidding for Olympic Games. At the same time, energy conservation and emissions reduction measures taken in the construction of Beijing Olympic stadiums just incarnate the Beijing Green Olympics. Using the Beijing Olympic Games as a turning-point, adopting energy conservation and emissions reduction measures, Beijing will make contributions to reduction of greenhouse gases and slowing down climate changes and Beijing Olympic Games will leave behind an inheritance for future generations to enjoy

Olympic Games promote the reduction in emissions of greenhouse gases in Beijing

Energy Technology Data Exchange (ETDEWEB)

Wu Jisong [China Centre of Recycle Economy Research, School of Economics and Management, Beijing University of Aeronautics and Astronautics, Beijing 100083 (China)], E-mail: js_wub@buaa.edu.cn; Zhang Yongjie [China Centre of Recycle Economy Research, School of Economics and Management, Beijing University of Aeronautics and Astronautics, Beijing 100083 (China)

2008-09-15

Global climate change is one of the most serious global environmental problems faced by humankind at present. Serious attention should be paid and precautions should be taken before disasters occur. The amount of CO{sub 2} emissions in China has increased during the past few years and the Chinese government and people have attached great importance to this phenomenon and treated it seriously. With the instruction of scientific development viewpoint, Beijing has made significant progress in emissions reduction through technological innovation, industrial structure adjustment, promoting energy efficiency and utilization of renewable energy, and absorption of CO{sub 2} using forest and wetland, since bidding for Olympic Games. At the same time, energy conservation and emissions reduction measures taken in the construction of Beijing Olympic stadiums just incarnate the Beijing Green Olympics. Using the Beijing Olympic Games as a turning-point, adopting energy conservation and emissions reduction measures, Beijing will make contributions to reduction of greenhouse gases and slowing down climate changes and Beijing Olympic Games will leave behind an inheritance for future generations to enjoy.

Olympic Games promote the reduction in emissions of greenhouse gases in Beijing

Energy Technology Data Exchange (ETDEWEB)

Wu, Jisong; Zhang, Yongjie [China Centre of Recycle Economy Research, School of Economics and Management, Beijing University of Aeronautics and Astronautics, Beijing 100083 (China)

2008-09-15

Global climate change is one of the most serious global environmental problems faced by humankind at present. Serious attention should be paid and precautions should be taken before disasters occur. The amount of CO{sub 2} emissions in China has increased during the past few years and the Chinese government and people have attached great importance to this phenomenon and treated it seriously. With the instruction of scientific development viewpoint, Beijing has made significant progress in emissions reduction through technological innovation, industrial structure adjustment, promoting energy efficiency and utilization of renewable energy, and absorption of CO{sub 2} using forest and wetland, since bidding for Olympic Games. At the same time, energy conservation and emissions reduction measures taken in the construction of Beijing Olympic stadiums just incarnate the Beijing Green Olympics. Using the Beijing Olympic Games as a turning-point, adopting energy conservation and emissions reduction measures, Beijing will make contributions to reduction of greenhouse gases and slowing down climate changes and Beijing Olympic Games will leave behind an inheritance for future generations to enjoy. (author)

A study on the isotope effects in the reduction of carbon dioxide by zinc; Etude des effets isotopiques dans la reduction du gaz carbonique par le zinc

Energy Technology Data Exchange (ETDEWEB)

Senegacnik, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1957-06-15

We have determined the isotope effects which occur in the reduction of carbon dioxide by zinc. It has been shown that in the case of irreversible surface reactions, Bernstein's equation which permits the calculation of the fractionation factor is still valid. These experimental factors are in good agreement with those obtained by calculating the partition functions of the adsorbed activated complexes. In the reaction mechanism used, the model of the activated complex corresponds to the dissociation of one of the carbon oxygen bonds CO{sub 2} {yields} CO + O. Perturbations arising from the slight reversibility of the reaction Zn + CO{sub 2} {r_reversible} ZnO + CO on the isotope effects on the carbon and oxygen atoms have also been calculated. (author) [French] Nous avons etudie les effets isotopiques qui ont lieu dans la reduction du gaz carbonique par le zinc. La validite de l'equation de Bernstein qui permet de calculer le facteur de fractionnement a ete demontree pour le cas d'une reaction irreversible de surface. Ces facteurs de fractionnement experimentaux sont en bon accord avec ceux obtenus par le calcul des fonctions de partition isotopiques des complexes actives adsorbes. Dans le mecanisme de reaction utilise, le modele du complexe active correspond a la dissociation d'une des liaisons carbone oxygene CO{sub 2} {yields} CO + O. Les effets perturbateurs de la reversibilite de la reduction Zn + CO{sub 2} {r_reversible} ZnO + CO sur les effets isotopiques du carbone et ceux de l'oxygene ont ete egalement evalues. (auteur)

A study on the isotope effects in the reduction of carbon dioxide by zinc; Etude des effets isotopiques dans la reduction du gaz carbonique par le zinc

Energy Technology Data Exchange (ETDEWEB)

Senegacnik, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1957-06-15

We have determined the isotope effects which occur in the reduction of carbon dioxide by zinc. It has been shown that in the case of irreversible surface reactions, Bernstein's equation which permits the calculation of the fractionation factor is still valid. These experimental factors are in good agreement with those obtained by calculating the partition functions of the adsorbed activated complexes. In the reaction mechanism used, the model of the activated complex corresponds to the dissociation of one of the carbon oxygen bonds CO{sub 2} {yields} CO + O. Perturbations arising from the slight reversibility of the reaction Zn + CO{sub 2} {r_reversible} ZnO + CO on the isotope effects on the carbon and oxygen atoms have also been calculated. (author) [French] Nous avons etudie les effets isotopiques qui ont lieu dans la reduction du gaz carbonique par le zinc. La validite de l'equation de Bernstein qui permet de calculer le facteur de fractionnement a ete demontree pour le cas d'une reaction irreversible de surface. Ces facteurs de fractionnement experimentaux sont en bon accord avec ceux obtenus par le calcul des fonctions de partition isotopiques des complexes actives adsorbes. Dans le mecanisme de reaction utilise, le modele du complexe active correspond a la dissociation d'une des liaisons carbone oxygene CO{sub 2} {yields} CO + O. Les effets perturbateurs de la reversibilite de la reduction Zn + CO{sub 2} {r_reversible} ZnO + CO sur les effets isotopiques du carbone et ceux de l'oxygene ont ete egalement evalues. (auteur)

Using mobile source emission reductions to offset stationary surce rule requirements

International Nuclear Information System (INIS)

Nazemi, M.A.; Beruldsen, K.J.

1993-01-01

A number of mobile source strategies have been evaluated that could potentially be used as an alternative means of compliance with existing stationary source regulations, at a lower cost. The evaluation was spurred by both public and private sector interest in identifying the lowest cost air pollution reduction strategies, and the realization that mobile sources are the predominate contributor to the air pollution problem in the South Coast Air Quality Basin. Strategies evaluated included removing older vehicles from the in-use population, use of alternative fuels, inspection and maintenance measures, application of remote sensing technology, exceeding AVR requirements, as well as a number of other strategies. Key implementation issues have been identified, so that the viability of each mobile source strategies could be assessed. These issues include: (1) quantification of emissions benefits, (2) determining whether the mobile source strategy would generate emission reductions surplus to existing and planned mobile source regulations, and (3) assessing the potential for enforceability. The results of evaluation indicate that there are a number of promising mobile source emission strategies that could provide quantifiable, surplus, and enforceable emission reductions

Catalytically supported reduction of emissions from small-scale biomass furnace systems; Katalytisch unterstuetzte Minderung von Emissionen aus Biomasse-Kleinfeuerungsanlagen

Energy Technology Data Exchange (ETDEWEB)

Hartmann, Ingo; Lenz, Volker; Schenker, Marian; Thiel, Christian [DBFZ Deutsches Biomasseforschungszentrum gemeinnuetzige GmbH, Leipzig (Germany); Kraus, Markus; Matthes, Mirjam; Roland, Ulf [Helmholtz-Zentrum fuer Umweltforschung GmbH - UFZ, Leipzig (Germany); Bindig, Rene; Einicke, Wolf-Dietrich [Leipzig Univ. (Germany)

2011-06-29

The increased use of solid biomass in small combustion for generating heat from renewable energy sources is unfortunately associated with increased emissions of airborne pollutants. The reduction is possible on the one hand by the use of high-quality modern furnaces to the latest state of the art. On the other hand, several promising approaches method for retrofitting small-scale furnaces are currently being developed that will allow an effective emission reduction by the subsequent treatment of the exhaust gas. The overview of current available emission control technologies for small-scale biomass combustion plants shows that there is still considerable need for research on the sustainable production of heat from solid biofuels. The amendment to the 1st BImSchV provides a necessary drastic reduction of discharged pollutants from small-scale biomass furnaces. When using the fuel wood in modern central heating boilers the required limits can be met at full load. However, dynamic load changes can cause brief dramatic emission increases even with wood central heating boilers. Firebox and control optimization must contribute in the future to a further reduction of emissions. The typical simple single-room fireplaces like hand-fed wood stoves are suitable under type test conditions to comply the limit values. By contrast, in practical operation, the harmful gas emissions be exceeded without secondary measures normally. The performed experimental investigations show that a reduction of both CO and of organic compounds by catalytic combustion is possible. In addition to developing specially adapted catalysts, it is necessary to provide additional dust separation by combined processes, since conventional catalysts are not suitable for deposition and retention of particulate matter or would lose their activity due to dust accumulation on the active surface, when the catalyst would act as a filter at the same time. To enable sufficiently high reaction temperatures and thus a

Catalytically supported reduction of emissions from small-scale biomass furnace systems; Katalytisch unterstuetzte Minderung von Emissionen aus Biomasse-Kleinfeuerungsanlagen

Energy Technology Data Exchange (ETDEWEB)

Hartmann, Ingo; Lenz, Volker; Schenker, Marian; Thiel, Christian [DBFZ Deutsches Biomasseforschungszentrum gemeinnuetzige GmbH, Leipzig (Germany); Kraus, Markus; Matthes, Mirjam; Roland, Ulf [Helmholtz-Zentrum fuer Umweltforschung GmbH - UFZ, Leipzig (Germany); Bindig, Rene; Einicke, Wolf-Dietrich [Leipzig Univ. (Germany)

2011-06-29

The increased use of solid biomass in small combustion for generating heat from renewable energy sources is unfortunately associated with increased emissions of airborne pollutants. The reduction is possible on the one hand by the use of high-quality modern furnaces to the latest state of the art. On the other hand, several promising approaches method for retrofitting small-scale furnaces are currently being developed that will allow an effective emission reduction by the subsequent treatment of the exhaust gas. The overview of current available emission control technologies for small-scale biomass combustion plants shows that there is still considerable need for research on the sustainable production of heat from solid biofuels. The amendment to the 1st BImSchV provides a necessary drastic reduction of discharged pollutants from small-scale biomass furnaces. When using the fuel wood in modern central heating boilers the required limits can be met at full load. However, dynamic load changes can cause brief dramatic emission increases even with wood central heating boilers. Firebox and control optimization must contribute in the future to a further reduction of emissions. The typical simple single-room fireplaces like hand-fed wood stoves are suitable under type test conditions to comply the limit values. By contrast, in practical operation, the harmful gas emissions be exceeded without secondary measures normally. The performed experimental investigations show that a reduction of both CO and of organic compounds by catalytic combustion is possible. In addition to developing specially adapted catalysts, it is necessary to provide additional dust separation by combined processes, since conventional catalysts are not suitable for deposition and retention of particulate matter or would lose their activity due to dust accumulation on the active surface, when the catalyst would act as a filter at the same time. To enable sufficiently high reaction temperatures and thus a

Cost-effective reduction of fine primary particulate matter emissions in Finland

International Nuclear Information System (INIS)

Karvosenoja, Niko; Klimont, Zbigniew; Tohka, Antti; Johansson, Matti

2007-01-01

Policies to reduce adverse health impacts of fine particulate matter (PM 2.5 ) require information on costs of abatement and associated costs. This paper explores the potential for cost-efficient control of anthropogenic primary PM 2.5 emissions in Finland. Based on a Kyoto-compliant energy projection, two emission control scenarios for 2020 were developed. 'Baseline' assumes implementation of PM controls in compliance with existing legislation. 'Reduction' assumes ambitious further reductions. Emissions for 2020 were estimated at 26 and 18.6 Gg a -1 for 'Baseline' and 'Reduction', respectively. The largest abatement potential, 3.0 Gg a -1 , was calculated for power plants and industrial combustion. The largest potential with marginal costs below 5000 Euro MG(PM 2.5 ) -1 was for domestic wood combustion, 1.7 Gg a -1 . For traffic the potential was estimated at 1.0 Gg a -1 , but was associated with high costs. The results from this paper are used in the policy-driven national integrated assessment modeling that explores cost-efficient reductions of the health impacts of PM

Electricity production from biogas in Serbia: Assessment of emissions reduction

Directory of Open Access Journals (Sweden)

Cvetković Slobodan M.

2016-01-01

Full Text Available Biogas represents a promising source for the production of clean energy. The objective of this paper was to quantify the potential for the reduction of emissions to the environment during the production of electricity from biogas in comparison with environmental effects of the production of the same amount of electricity from fossil resources (coal from Kolubara basin and natural gas. Basis for comparison of environmental impacts in this work was the annual production of electricity in biogas plants of the total capacity of 80 MW. This study has shown that the annual production of electricity from biogas power plants of 80 MW results in: substitution of up to 840 kt of coal from Kolubara basin and 123.2 million m3 of natural gas; reduction in emissions of greenhouse gases in the range of 491.16 kt - 604.97 kt CO2-eq, depending on the energy efficiency of the process of electricity production from biogas; reduction in emissions of greenhouse gases up to 92.37 kt CO2-eq compared to the use of natural gas for electricity generation.

SPATIAL DISTRIBUTIONS OF ABSORPTION, LOCAL SUPPRESSION, AND EMISSIVITY REDUCTION OF SOLAR ACOUSTIC WAVES IN MAGNETIC REGIONS

International Nuclear Information System (INIS)

Chou, D.-Y.; Yang, M.-H.; Zhao Hui; Liang Zhichao; Sun, M.-T.

2009-01-01

Observed acoustic power in magnetic regions is lower than the quiet Sun because of absorption, emissivity reduction, and local suppression of solar acoustic waves in magnetic regions. In the previous studies, we have developed a method to measure the coefficients of absorption, emissivity reduction, and local suppression of sunspots. In this study, we go one step further to measure the spatial distributions of three coefficients in two active regions, NOAA 9055 and 9057. The maps of absorption, emissivity reduction, and local suppression coefficients correlate with the magnetic map, including plage regions, except the emissivity reduction coefficient of NOAA 9055 where the emissivity reduction coefficient is too weak and lost among the noise.

CO_2 emissions and energy intensity reduction allocation over provincial industrial sectors in China

International Nuclear Information System (INIS)

Wu, Jie; Zhu, Qingyuan; Liang, Liang

2016-01-01

Highlights: • DEA is used to evaluate the energy and environmental efficiency of 30 provincial industrial sector in China. • A new DEA-based model is proposed to allocate the CO_2 emissions and energy intensity reduction targets. • The context-dependent DEA is used to characterize the production plans. - Abstract: High energy consumption by the industry of developing countries has led to the problems of increasing emission of greenhouse gases (GHG) (primarily CO_2) and worsening energy shortages. To address these problems, many mitigation measures have been utilized. One major measure is to mandate fixed reductions of GHG emission and energy consumption. Therefore, it is important for each developing country to disaggregate their national reduction targets into targets for various geographical parts of the country. In this paper, we propose a DEA-based approach to allocate China’s national CO_2 emissions and energy intensity reduction targets over Chinese provincial industrial sectors. We firstly evaluate the energy and environmental efficiency of Chinese industry considering energy consumption and GHG emissions. Then, considering the necessity of mitigating GHG emission and energy consumption, we develop a context-dependent DEA technique which can better characterize the changeable production with reductions of CO_2 emission and energy intensity, to help allocate the national reduction targets over provincial industrial sectors. Our empirical study of 30 Chinese regions for the period 2005–2010 shows that the industry of China had poor energy and environmental efficiency. Considering three major geographical areas, eastern China’s industrial sector had the highest efficiency scores while in this aspect central and western China were similar to each other at a lower level. Our study shows that the most effective allocation of the national reduction target requires most of the 30 regional industrial to reduce CO_2 emission and energy intensity, while a

Reduce NOx Emissions by Adsorber-Reduction Catalyst on Lean Burn Gasoline Engine

Directory of Open Access Journals (Sweden)

Dongpeng Yue

2013-09-01

Full Text Available The effect of a new catalyst system composed of traditional three way catalyst converter and adsorber-reduction catalysis converter on the emission characteristics and BSFC (Breake Specific Fuel Consumption- BSFCof a lean burn gasoline engine operated were investigated in this paper under different schemes of catalyst converter arrangement and different speeds and loads. The results show that the position of Three Way Catalyst is before the NOx adsorber Catalyst was the best scheme of catalyst converter arrangement. Which has the highest converter efficiency of reduction NOx emission in lean burn gasoline engine. The effects of speed on the exhaust emission and BSFC were also related to the ratio of lean burn time to rich burn time and the absolute value of both time of the adsorber-reduction catalyst converter. The load of the engine was the main influential factor to the exhaust emission characteristics and BSFC of lean burn gasoline engine, and the more load of the engine was, the more NOx emission , the less NOx conversion rate (CNOx and the better BSFC were.

CO2 Emission Reduction in Energy Sector

International Nuclear Information System (INIS)

Bole, A.; Sustersic, A.; Voncina, R.

2013-01-01

Due to human activities, concentrations of the greenhouse gases increase in the atmosphere much quicker than they naturally would. Today it is clear that climate change is the result of human activities. With the purpose of preventing, reducing and mitigating of climate change, the EU, whose member is also Slovenia, set ambitious goals. In order to keep rise of the global atmosphere temperature below 2 degrees of C, the European Council set an objective of reducing greenhouse gas emissions by 80 - 95 % by 2050 compared to 1990. It is important that every single individual is included in achieving of these goals. Certainly, the most important role is assumed by individual sectors especially Public Electricity and Heat Production sector as one of the greatest emitters of the greenhouse gases. As a possible solution of radical reduction of the greenhouse gases emission from mentioned sector Carbon Capture and Storage (CCS) technology is implemented. In the article the range of CO 2 reduction possibilities, technology demands and environmental side effects of CCS technology are described. Evaluation of CCS implementation possibilities in Slovenia is also included.(author)

Ozone response to emission reductions in the southeastern United States

Science.gov (United States)

Blanchard, Charles L.; Hidy, George M.

2018-06-01

Ozone (O3) formation in the southeastern US is studied in relation to nitrogen oxide (NOx) emissions using long-term (1990s-2015) surface measurements of the Southeastern Aerosol Research and Characterization (SEARCH) network, U.S. Environmental Protection Agency (EPA) O3 measurements, and EPA Clean Air Status and Trends Network (CASTNET) nitrate deposition data. Annual fourth-highest daily peak 8 h O3 mixing ratios at EPA monitoring sites in Georgia, Alabama, and Mississippi exhibit statistically significant (p total oxidized nitrogen (NOy) mixing ratios at SEARCH sites declined in proportion to NOx emission reductions. CASTNET data show declining wet and dry nitrate deposition since the late 1990s, with total (wet plus dry) nitrate deposition fluxes decreasing linearly in proportion to reductions of NOx emissions by ˜ 60 % in Alabama and Georgia. Annual nitrate deposition rates at Georgia and Alabama CASTNET sites correspond to 30 % of Georgia emission rates and 36 % of Alabama emission rates, respectively. The fraction of NOx emissions lost to deposition has not changed. SEARCH and CASTNET sites exhibit downward trends in mean annual nitric acid (HNO3) concentrations. Observed relationships of O3 to NOz (NOy-NOx) support past model predictions of increases in cycling of NO and increasing responsiveness of O3 to NOx. The study data provide a long-term record that can be used to examine the accuracy of process relationships embedded in modeling efforts. Quantifying observed O3 trends and relating them to reductions in ambient NOy species concentrations offers key insights into processes of general relevance to air quality management and provides important information supporting strategies for reducing O3 mixing ratios.

Differences in regional emissions in China's transport sector: Determinants and reduction strategies

International Nuclear Information System (INIS)

Xu, Bin; Lin, Boqiang

2016-01-01

With recent surge in the number of vehicles, particularly private vehicles, the transport sector has significantly contributed to the increase in energy consumption and carbon dioxide emissions in China. Most of the existing researches utilized time series data to investigate the factors influencing transport sector's carbon dioxide emission at the national level while neglecting the level of regional differences. This paper adopts provincial panel data from 2000 to 2012 and panel data models to examine the key driving forces of carbon dioxide emissions in the transport sector at the regional level in China. The estimation results show that the impacts of urbanization on carbon dioxide emissions in the transport sector vary across regions and decline continuously from the western region to the eastern and central regions. Private vehicles are more important than cargo turnover in emission reduction because of its relatively inefficient and excessive growth. The role of energy efficiency improvement in mitigating carbon dioxide emissions in the three regions varies due to significant differences in research and development investment and management efficiency. Hence, in order to effectively achieve emission reduction, local governments should consider all these factors as well as regional heterogeneity in developing appropriate mitigation policies. - Highlights: • The factors of carbon dioxide emissions in China's transport sector were explored. • The impact of urbanization on carbon dioxide emissions varies across regions. • Private vehicles are more critical than cargo turnover in emission reduction. • The role of energy efficiency in the three regions is exactly the opposite.

Greenhouse gas emission reduction by means of fuel switching in electricity generation: Addressing the potentials

International Nuclear Information System (INIS)

Delarue, Erik; D'haeseleer, William

2008-01-01

Many countries committed themselves in the Kyoto protocol to reduce greenhouse gas (GHG) emissions. Some of these targeted emission reductions could result from a switch from coal-fired to gas-fired electricity generation. The focus in this work lies on Western Europe, with the presence of the European Union Emission Trading Scheme (EU ETS). For the switching to occur, several conditions have to be fulfilled. First, an economical incentive must be present, i.e. a sufficiently high European Union Allowance (EUA) price together with a sufficiently low natural gas price. Second, the physical potential for switching must exist, i.e. at a given load, there must remain enough power plants not running to make switching possible. This paper investigates what possibilities exist for switching coal-fired plants for gas-fired plants, dependent on the load level (the latter condition above). A fixed allowance cost and a variable natural gas price are assumed. The method to address GHG emission reduction potentials is first illustrated in a methodological case. Next, the GHG emission reduction potentials are addressed for several Western European countries together with a relative positioning of their electricity generation. GHG emission reduction potentials are also compared with simulation results. GHG emission reduction potentials tend to be significant. The Netherlands have a very widespread switching zone, so GHG emission reduction is practically independent of electricity generation. Other counties, like Germany, Spain and Italy could reduce GHG emissions significantly by switching. With an allowance cost following the switch level of a 50% efficient gas-fired plant and a 40% efficient coal-fired plant in the summer season (like in 2005), the global GHG emission reduction (in the electricity generating sector) for the eight modeled zones could amount to 19%

Reduction of CO2 emissions by influencing fuel prices

International Nuclear Information System (INIS)

Keller, M.; Zbinden, R.; Haan, P.; Gruetter, J.; Ott, W.

2002-01-01

The CO 2 law stipulates quantitative targets for CO 2 emissions (reductions of 10% by 2010 compared with 1990, 15% for heating fuels, 8% for motor fuels). For motor fuels, it is currently estimated that the target will be missed by about 15%, or 2 to 2.5 million tonnes of CO 2 . In order to reach the targets, therefore, all measures that can be taken to reduce emissions are to be checked out and, where sensible and possible, implemented too. The subject of this study is the preferential treatment of diesel, natural gas, liquefied gas and bio-fuels as far as taxation is concerned, with compensation of tax losses on the petrol side. Also, the possibilities for promoting energy-efficient cars are looked at. The reduction of the price for diesel (at least 25 Swiss cents when compensated for via the petrol price) is considered to be unsuitable for reaching the targets because, in the final analysis, fuel sales - the determining factor for the CO 2 emissions that are charged to Switzerland - will increase instead of decreasing. Also, reservations are expressed from the environmental point of view (increased NO x emissions and, in particular, emissions of particulate matter). The modified measure proposed (fixed difference between the prices for petrol and diesel of 25 Swiss cents, for example) is looked at less critically, because it does actually lead to a reduction of CO 2 , even if only a modest one (approx. 10% of the gap to be bridged). On the environmental side, the same reservations apply. Bonus-malus systems, on the other hand, permit a selective choice of the objects of promotion (efficient and, possibly, low-emission vehicles), avoid the unjust preferential treatment of goods traffic and can be implemented without disturbing international price structures (fuel tourism). A bonus-malus system applied at purchase (e.g. different levels of car taxation) is considered to be more efficient than a differentiation in vehicle (road) tax. The promotion of gas is a

Lean-burn engines UHC emission reduction

Energy Technology Data Exchange (ETDEWEB)

Karll, B.; Kristensen, P.G.; Nielsen, M.; Iskov, H. [Danish Gas Technology Centre a/s (Denmark); Broe Bendtsen, A.; Glarborg, P.; Dam-Johansen, K. [Technical University of Denmark. CHEC, Department of Chemical Engineering (Denmark)

1999-04-01

The effect of adding hydrogen to methane as a fuel for spark ignited engines has been extensively investigated. Both the possibility of adding a limited amount of hydrogen as well as equal amounts of hydrogen and carbon dioxide to natural gas has been investigated. A 10 vol% addition of hydrogen to the natural gas caused a reduction in UHC of approximately 40%, and an increase in efficiency of approximately three percentage points at the test engine. It is unknown if the gain is representative for large engines. Similar results for UHC reduction and efficiency were obtained for combined hydrogen and carbon dioxide addition. The carbon dioxide was added by exhaust gas recirculation. However, the price of hydrogen, makes this idea uneconomical even when carbon dioxide is readily available through recirculation of engine exhaust. Adiabatic prereforming may be used to convert natural gas into methane, hydrogen and carbon dioxide in order to generate hydrogen and at the same time increase the methane number. The process has been found to be competitive with adding of hydrogen but it is still not economical. The effect of NO/NO{sub 2} on methane oxidation has been studied both theoretically and experimentally. A detailed kinetic modelling study of the UHC conversion dependency of exhaust gas parameters is reported and the project has contributed to the theoretical understanding of the oxidation chemistry. Both NO and NH{sub 3} addition to the engine inlet was used to increase the NO{sub x} level, and the general trend was a decrease in UHC as the NO{sub x} level increased, both in cylinger, manifold and rector. From the data it is concluded that NO and NH{sub 3} addition have identical effects. The results show a 15-35% decrease in manifold UHC. However, the increased emissions of NO{sub x} and CO associated with this process must be realised. Field tests show a 28% UHC reduction without an increase in CO emission. The UHC oxidation in the exhaust reactor has been tested

Lean-burn engines UHC emission reduction

International Nuclear Information System (INIS)

Karll, B.; Kristensen, P.G.; Nielsen, M.; Iskov, H.; Broe Bendtsen, A.; Glarborg, P.; Dam-Johansen, K.

1999-01-01

The effect of adding hydrogen to methane as a fuel for spark ignited engines has been extensively investigated. Both the possibility of adding a limited amount of hydrogen as well as equal amounts of hydrogen and carbon dioxide to natural gas has been investigated. A 10 vol% addition of hydrogen to the natural gas caused a reduction in UHC of approximately 40%, and an increase in efficiency of approximately three percentage points at the test engine. It is unknown if the gain is representative for large engines. Similar results for UHC reduction and efficiency were obtained for combined hydrogen and carbon dioxide addition. The carbon dioxide was added by exhaust gas recirculation. However, the price of hydrogen, makes this idea uneconomical even when carbon dioxide is readily available through recirculation of engine exhaust. Adiabatic prereforming may be used to convert natural gas into methane, hydrogen and carbon dioxide in order to generate hydrogen and at the same time increase the methane number. The process has been found to be competitive with adding of hydrogen but it is still not economical. The effect of NO/NO 2 on methane oxidation has been studied both theoretically and experimentally. A detailed kinetic modelling study of the UHC conversion dependency of exhaust gas parameters is reported and the project has contributed to the theoretical understanding of the oxidation chemistry. Both NO and NH 3 addition to the engine inlet was used to increase the NO x level, and the general trend was a decrease in UHC as the NO x level increased, both in cylinger, manifold and rector. From the data it is concluded that NO and NH 3 addition have identical effects. The results show a 15-35% decrease in manifold UHC. However, the increased emissions of NO x and CO associated with this process must be realised. Field tests show a 28% UHC reduction without an increase in CO emission. The UHC oxidation in the exhaust reactor has been tested at increased NO x levels and

Senegal country study; Evaluation des couts de reduction des emissions de gaz a effect de serre au Senegal

Energy Technology Data Exchange (ETDEWEB)

Sow, I

1998-10-01

The first part of this study consists of an analysis of the socio-economic development in Senegal and of establishment of inventory and energy balance for greenhouse gases. Scenarios for emission from single economic sectors are discussed. (EG)

GENERIC VERIFICATION PROTOCOL FOR DETERMINATION OF EMISSIONS REDUCTIONS FROM SELECTIVE CATALYTIC REDUCTIONS CONTROL TECHNOLOGIES FOR HIGHWAY, NONROAD, AND STATIONARY USE DIESEL ENGINES

Science.gov (United States)

The protocol describes the Environmental Technology Verification (ETV) Program's considerations and requirements for verification of emissions reduction provided by selective catalytic reduction (SCR) technologies. The basis of the ETV will be comparison of the emissions and perf...

City-specific vehicle emission control strategies to achieve stringent emission reduction targets in China's Yangtze River Delta region.

Science.gov (United States)

Zhang, Shaojun; Wu, Ye; Zhao, Bin; Wu, Xiaomeng; Shu, Jiawei; Hao, Jiming

2017-01-01

The Yangtze River Delta (YRD) region is one of the most prosperous and densely populated regions in China and is facing tremendous pressure to mitigate vehicle emissions and improve air quality. Our assessment has revealed that mitigating vehicle emissions of NOx would be more difficult than reducing the emissions of other major vehicular pollutants (e.g., CO, HC and PM 2.5 ) in the YRD region. Even in Shanghai, where the emission control implemented are more stringent than in Jiangsu and Zhejiang, we observed little to no reduction in NOx emissions from 2000 to 2010. Emission-reduction targets for HC, NOx and PM 2.5 are determined using a response surface modeling tool for better air quality. We design city-specific emission control strategies for three vehicle-populated cities in the YRD region: Shanghai and Nanjing and Wuxi in Jiangsu. Our results indicate that even if stringent emission control consisting of the Euro 6/VI standards, the limitation of vehicle population and usage, and the scrappage of older vehicles is applied, Nanjing and Wuxi will not be able to meet the NOx emissions target by 2020. Therefore, additional control measures are proposed for Nanjing and Wuxi to further mitigate NOx emissions from heavy-duty diesel vehicles. Copyright © 2016. Published by Elsevier B.V.

Climate and Health Impacts of US Emissions Reductions Consistent with 2 C

Science.gov (United States)

Shindell, Drew T.; Lee, Yunha; Faluvegi, Greg

2016-01-01

An emissions trajectory for the US consistent with 2 C warming would require marked societal changes, making it crucial to understand the associated benefits. Previous studies have examined technological potentials and implementation costs and public health benefits have been quantified for less-aggressive potential emissions-reduction policies, but researchers have not yet fully explored the multiple benefits of reductions consistent with 2 C. We examine the impacts of such highly ambitious scenarios for clean energy and vehicles. US transportation emissions reductions avoid approx.0.03 C global warming in 2030 (0.15 C in 2100), whereas energy emissions reductions avoid approx.0.05-0.07 C 2030 warming (approx.0.25 C in 2100). Nationally, however, clean energy policies produce climate disbenefits including warmer summers (although these would be eliminated by the remote effects of similar policies if they were undertaken elsewhere). The policies also greatly reduce damaging ambient particulate matter and ozone. By 2030, clean energy policies could prevent approx.175,000 premature deaths, with approx.22,000 (11,000-96,000; 95% confidence) fewer annually thereafter, whereas clean transportation could prevent approx.120,000 premature deaths and approx.14,000 (9,000-52,000) annually thereafter. Near-term national benefits are valued at approx.US$250 billion (140 billion to 1,050billion) per year, which is likely to exceed implementation costs. Including longer-term, worldwide climate impacts, benefits roughly quintuple, becoming approx.5-10 times larger than estimated implementation costs. Achieving the benefits, however, would require both larger and broader emissions reductions than those in current legislation or regulations.

Reviews on current carbon emission reduction technologies and projects and their feasibilities on ships

Science.gov (United States)

Wang, Haibin; Zhou, Peilin; Wang, Zhongcheng

2017-06-01

Concern about global climate change is growing, and many projects and researchers are committed to reducing greenhouse gases from all possible sources. International Maritime (IMO) has set a target of 20% CO2 reduction from shipping by 2020 and also presented a series of carbon emission reduction methods, which are known as Energy Efficiency Design Index (EEDI) and Energy Efficiency Operation Indicator (EEOI). Reviews on carbon emission reduction from all industries indicate that, Carbon Capture and Storage (CCS) is an excellent solution to global warming. In this paper, a comprehensive literature review of EEDI and EEOI and CCS is conducted and involves reviewing current policies, introducing common technologies, and considering their feasibilities for marine activities, mainly shipping. Current projects are also presented in this paper, thereby illustrating that carbon emission reduction has been the subject of attention from all over the world. Two case ship studies indicate the economic feasibility of carbon emission reduction and provide a guide for CCS system application and practical installation on ships.

Catalytic reduction of emissions from small-scale combustion of biomass

International Nuclear Information System (INIS)

Berg, Magnus; Gustavsson, Patrik; Berge, Niklas

1998-01-01

This report covers a study on the prospect of using catalytic techniques for the abatement of emissions from small-scale combustion of biomass. The results show that there is a great potential for catalytic techniques and that the emissions of primarily CO and unburned hydrocarbons can be reduced but also that indirectly the emissions of NO x can be reduced. The aim of the project was to methodically indicate the requirement that both the catalyst and the stove must meet to enable the development of low emission stoves utilising this technique. The project should also aim at the development of catalysts that meet these requirements and apply the technique on small-scale stoves. By experimental work these appliances have been evaluated and conclusions drawn on the optimisation of the technique. The project has been performed in close collaboration between TPS Termiska Processer AB, Department of Chemical Technology at KTH, Perstorp AB and CTC-PARCA AB. The development of new catalysts have been conduc ted by KTH in collaboration with Perstorp while the work performed by TPS have been directed towards the integration of the monolithic catalysts in two different stoves that have been supplied by CTC. In one of these stoves a net based catalyst developed by KATATOR have also been tested. Within the project it has been verified experimentally that in a wood fired stove a reduction of the CO-emissions of 60% can be achieved for the monolithic catalysts. This reduction could be achieved even without any optimisation of the design. Experiments in a smaller scale and under well controlled conditions have shown that almost 100% reduction of CO can be achieved. The parameters that limits the conversion over the catalyst, and thereby prevents that the targeted low emissions can be reached, have been identified as: * Short residence time, * Mass transport limitations caused by the large channel width, * Uneven temperature profile over the catalyst, and * Insufficient mixing

Analysis and application of a novel three-dimensional energy-saving and emission-reduction dynamic evolution system

International Nuclear Information System (INIS)

Fang, Guochang; Tian, Lixin; Sun, Mei; Fu, Min

2012-01-01

A novel three-dimensional energy-saving and emission-reduction chaotic system is proposed, which has not yet been reported in present literature. The system is established in accordance with the complicated relationship between energy-saving and emission-reduction, carbon emissions and economic growth. The dynamic behavior of the system is analyzed by means of Lyapunov exponents and bifurcation diagrams. With undetermined coefficient method, expressions of homoclinic orbits of the system are obtained. The Šilnikov theorem guarantees that the system has Smale horseshoes and the horseshoes chaos. Artificial neural network (ANN) is used to identify the quantitative coefficients in the simulation models according to the statistical data of China, and an empirical study of the real system is carried out with the results in perfect agreement with actual situation. It is found that the sooner and more perfect energy-saving and emission-reduction is started, the easier and sooner the maximum of the carbon emissions will be achieved so as to reduce carbon emissions and energy intensity. Numerical simulations are presented to demonstrate the results. -- Highlights: ► Use non-linear dynamical method to model the energy-saving and emission-reduction system. ► The energy-saving and emission-reduction attractor is obtained. ► Identify the unknown parameters of the energy-saving and emission-reduction system based on the statistical data. ► Evaluating the achievements of energy-saving and emission-reduction by the time-varying energy intensity calculation formula. ► Some statistical results based on the statistical data in China are presented, which are vivid and adherent to the reality.

Smart Transportation CO2 Emission Reduction Strategies

Science.gov (United States)

Tarulescu, S.; Tarulescu, R.; Soica, A.; Leahu, C. I.

2017-10-01

Transport represents the sector with the fastest growing greenhouse gas emissions around the world. The main global objective is to reduce energy usage and associated greenhouse gas emissions from the transportation sector. For this study it was analyzed the road transportation system from Brasov Metropolitan area. The study was made for the transportation route that connects Ghimbav city to the main surrounding objectives. In this study ware considered four optimization measures: vehicle fleet renewal; building the detour belt for the city; road increasing the average travel speed; making bicycle lanes; and implementing an urban public transport system for Ghimbav. For each measure it was used a mathematical model to calculate the energy consumption and carbon emissions from the road transportation sector. After all four measures was analyzed is calculated the general energy consumption and CO2 reduction if this are applied from year 2017 to 2020.

Potential for greenhouse gas emission reductions using surplus electricity in hydrogen, methane and methanol production via electrolysis

International Nuclear Information System (INIS)

Uusitalo, Ville; Väisänen, Sanni; Inkeri, Eero; Soukka, Risto

2017-01-01

Highlights: • Greenhouse gas emission reductions using power-to-x processes are studied using life cycle assessment. • Surplus electricity use led to greenhouse gas emission reductions in all studied cases. • Highest reductions can be achieved by using hydrogen to replace fossil based hydrogen. • High reductions are also achieved when fossil transportation fuels are replaced. - Abstract: Using a life cycle perspective, potentials for greenhouse gas emission reductions using various power-to-x processes via electrolysis have been compared. Because of increasing renewable electricity production, occasionally surplus renewable electricity is produced, which leads to situations where the price of electricity approach zero. This surplus electricity can be used in hydrogen, methane and methanol production via electrolysis and other additional processes. Life cycle assessments have been utilized to compare these options in terms of greenhouse gas emission reductions. All of the power-to-x options studied lead to greenhouse gas emission reductions as compared to conventional production processes based on fossil fuels. The highest greenhouse gas emission reductions can be gained when hydrogen from steam reforming is replaced by hydrogen from the power-to-x process. High greenhouse gas emission reductions can also be achieved when power-to-x products are utilized as an energy source for transportation, replacing fossil transportation fuels. A third option with high greenhouse gas emission reduction potential is methane production, storing and electricity conversion in gas engines during peak consumption hours. It is concluded that the power-to-x processes provide a good potential solution for reducing greenhouse gas emissions in various sectors.

Assessing Multiple Pathways for Achieving China’s National Emissions Reduction Target

Directory of Open Access Journals (Sweden)

Mingyue Wang

2018-06-01

Full Text Available In order to achieve China’s target of carbon intensity emissions reduction in 2030, there is a need to identify a scientific pathway and feasible strategies. In this study, we used stochastic frontier analysis method of energy efficiency, incorporating energy structure, economic structure, human capital, capital stock and potential energy efficiency to identify an efficient pathway for achieving emissions reduction target. We set up 96 scenarios including single factor scenarios and multi-factors combination scenarios for the simulation. The effects of each scenario on achieving the carbon intensity reduction target are then evaluated. It is found that: (1 Potential energy efficiency has the greatest contribution to the carbon intensity emissions reduction target; (2 they are unlikely to reach the 2030 carbon intensity reduction target of 60% by only optimizing a single factor; (3 in order to achieve the 2030 target, several aspects have to be adjusted: the fossil fuel ratio must be lower than 80%, and its average growth rate must be decreased by 2.2%; the service sector ratio in GDP must be higher than 58.3%, while the growth rate of non-service sectors must be lowered by 2.4%; and both human capital and capital stock must achieve and maintain a stable growth rate and a 1% increase annually in energy efficiency. Finally, the specific recommendations of this research were discussed, including constantly improved energy efficiency; the upgrading of China’s industrial structure must be accelerated; emissions reduction must be done at the root of energy sources; multi-level input mechanisms in overall levels of education and training to cultivate the human capital stock must be established; investment in emerging equipment and accelerate the closure of backward production capacity to accumulate capital stock.

Biomass District Energy Trigeneration Systems: Emissions Reduction and Financial Impact

International Nuclear Information System (INIS)

Rentizelas, A.; Tolis, A.; Tatsiopoulos, I.

2009-01-01

Biomass cogeneration is widely used for district heating applications in central and northern Europe. Biomass trigeneration on the other hand, constitutes an innovative renewable energy application. In this work, an approved United Nations Framework Convention on Climate Change baseline methodology has been extended to allow the examination of biomass trigeneration applications. The methodology is applied to a case study in Greece to investigate various environmental and financial aspects of this type of applications. The results suggest that trigeneration may lead to significant emissions reduction compared to using fossil fuels or even biomass cogeneration and electricity generation. The emissions reduction achieved may be materialized into a considerable revenue stream for the project, if traded through a trading mechanism such as the European Union Greenhouse Gas Emission Trading Scheme. A sensitivity analysis has been performed to compensate for the high volatility of the emission allowances' value and the immaturity of the EU Trading Scheme, which prevent a reliable estimation of the related revenue. The work concludes that emission allowances trading may develop into one of the major revenue streams of biomass trigeneration projects, significantly increasing their financial yield and attractiveness. The impact on the yield is significant even for low future values of emission allowances and could become the main income revenue source of such projects, if emission allowances increase their value substantially. The application of trigeneration for district energy proves to lead to increased environmental and financial benefits compared to the cogeneration or electricity generation cases

Innovative technologies for greenhouse gas emission reduction in steel production

Directory of Open Access Journals (Sweden)

D. Burchart-Korol

2016-01-01

Full Text Available The main goal of the study was to present the most significant technological innovations aiming at reduction of greenhouse gas emission in steel production. Reduction of greenhouse gas and dust pollution is a very important aspect in the iron and steel industry. New solutions are constantly being searched for to reduce greenhouse gases (GHG. The article presents the most recent innovative technologies which may be applied in the steel industry in order to limit the emission of GHG. The significance of CCS (CO2 Capture and Storage and CCU (CO2 Capture and Utilization in the steel industry are also discussed.

Ozone response to emission reductions in the southeastern United States

Directory of Open Access Journals (Sweden)

C. L. Blanchard

2018-06-01

Full Text Available Ozone (O3 formation in the southeastern US is studied in relation to nitrogen oxide (NOx emissions using long-term (1990s–2015 surface measurements of the Southeastern Aerosol Research and Characterization (SEARCH network, U.S. Environmental Protection Agency (EPA O3 measurements, and EPA Clean Air Status and Trends Network (CASTNET nitrate deposition data. Annual fourth-highest daily peak 8 h O3 mixing ratios at EPA monitoring sites in Georgia, Alabama, and Mississippi exhibit statistically significant (p  <  0.0001 linear correlations with annual NOx emissions in those states between 1996 and 2015. The annual fourth-highest daily peak 8 h O3 mixing ratios declined toward values of ∼ 45–50 ppbv and monthly O3 maxima decreased at rates averaging ∼ 1–1.5 ppbv yr−1. Mean annual total oxidized nitrogen (NOy mixing ratios at SEARCH sites declined in proportion to NOx emission reductions. CASTNET data show declining wet and dry nitrate deposition since the late 1990s, with total (wet plus dry nitrate deposition fluxes decreasing linearly in proportion to reductions of NOx emissions by ∼ 60 % in Alabama and Georgia. Annual nitrate deposition rates at Georgia and Alabama CASTNET sites correspond to 30 % of Georgia emission rates and 36 % of Alabama emission rates, respectively. The fraction of NOx emissions lost to deposition has not changed. SEARCH and CASTNET sites exhibit downward trends in mean annual nitric acid (HNO3 concentrations. Observed relationships of O3 to NOz (NOy–NOx support past model predictions of increases in cycling of NO and increasing responsiveness of O3 to NOx. The study data provide a long-term record that can be used to examine the accuracy of process relationships embedded in modeling efforts. Quantifying observed O3 trends and relating them to reductions in ambient NOy species concentrations offers key insights into processes of general relevance to air quality management and

Possibilities for Carbon Dioxide Emission Reduction Resulting from Nuclear Power Use

International Nuclear Information System (INIS)

Bozicevic, M.; Tomsic, Z.; Kovacevic, T.

1998-01-01

Each energy resource is connected to certain environmental impacts and risks which must be taken into account. In recent years attention has been focused on the climate change effects of the burning fossil fuels, especially coal, due to the carbon dioxide which this releases into the atmosphere. If the electric energy produced in nuclear power plants were produced in coal-fired plants, global CO 2 emissions would rise for more than 2000 million tons, a significant value in comparison with 4000 million tons which is recommended as a target for emission reduction by the year 2005 at the Toronto Conference on the Changing Atmosphere. Possibilities for carbon dioxide emission reduction which would be the result of the nuclear option acceptance are discussed in this paper. (author)

The international research progress of Ammonia(NH3) emissions and emissions reduction technology in farmland ecosystem

Science.gov (United States)

Yang, W. Z.; Jiao, Y.

2017-03-01

NH3 is the important factor leading to the grey haze, and one of the main causes of environmental problems of serious ecological imbalance, such as acid rain and air quality deterioration. The fertilizer excessive application of the current farmland results NH3 emissions intensity greatly. In order to clear the farmland NH3 emissions research status and achievements, the literature of farmland NH3 emission related were retrievaled by the SCI journals and Chinese science citation database. Some factors of NH3 emission were analyzed such as soil factors, climate factors and farmland management measures. The research progress was inductived on farmland NH3 emission reduction technology. The results will help to clarify farmland NH3 emissions research progress. The theoretical guidance was provided on the future of farmland NH3 emissions research.

Estimate of Possible CO2 Emission Reduction in Slovenia

International Nuclear Information System (INIS)

Plavcak, V.-P.; Jevsek, F.; Tirsek, A.

1998-01-01

The first estimation of possible CO 2 emission reduction, according to the obligations from Kyoto Protocol, is prepared. The results show that the required 8% reduction of greenhouses gases in Slovenia in the period from 2008 to 2012 with regard to year 1986 will require a through analytical treatment not only in electric power sector but also in transport and industry sectors, which are the main pollutants. (author)

Catalytically supported reduction of emissions from small-scale biomass furnace systems

International Nuclear Information System (INIS)

Hartmann, Ingo; Lenz, Volker; Schenker, Marian; Thiel, Christian; Kraus, Markus; Matthes, Mirjam; Roland, Ulf; Bindig, Rene; Einicke, Wolf-Dietrich

2011-01-01

The increased use of solid biomass in small combustion for generating heat from renewable energy sources is unfortunately associated with increased emissions of airborne pollutants. The reduction is possible on the one hand by the use of high-quality modern furnaces to the latest state of the art. On the other hand, several promising approaches method for retrofitting small-scale furnaces are currently being developed that will allow an effective emission reduction by the subsequent treatment of the exhaust gas. The overview of current available emission control technologies for small-scale biomass combustion plants shows that there is still considerable need for research on the sustainable production of heat from solid biofuels. The amendment to the 1st BImSchV provides a necessary drastic reduction of discharged pollutants from small-scale biomass furnaces. When using the fuel wood in modern central heating boilers the required limits can be met at full load. However, dynamic load changes can cause brief dramatic emission increases even with wood central heating boilers. Firebox and control optimization must contribute in the future to a further reduction of emissions. The typical simple single-room fireplaces like hand-fed wood stoves are suitable under type test conditions to comply the limit values. By contrast, in practical operation, the harmful gas emissions be exceeded without secondary measures normally. The performed experimental investigations show that a reduction of both CO and of organic compounds by catalytic combustion is possible. In addition to developing specially adapted catalysts, it is necessary to provide additional dust separation by combined processes, since conventional catalysts are not suitable for deposition and retention of particulate matter or would lose their activity due to dust accumulation on the active surface, when the catalyst would act as a filter at the same time. To enable sufficiently high reaction temperatures and thus a

CO2 emissions and reduction potential in China's chemical industry

International Nuclear Information System (INIS)

Zhu, Bing; Zhou, Wenji; Hu, Shanying; Li, Qiang; Griffy-Brown, Charla; Jin, Yong

2010-01-01

GHG (Increasing greenhouse gas) emissions in China imposes enormous pressure on China's government and society. The increasing GHG trend is primarily driven by the fast expansion of high energy-intensive sectors including the chemical industry. This study investigates energy consumption and CO 2 emissions in the processes of chemical production in China through calculating the amounts of CO 2 emissions and estimating the reduction potential in the near future. The research is based on a two-level perspective which treats the entire industry as Level one and six key sub-sectors as Level two, including coal-based ammonia, calcium carbide, caustic soda, coal-based methanol, sodium carbonate, and yellow phosphorus. These two levels are used in order to address the complexity caused by the fact that there are more than 40 thousand chemical products in this industry and the performance levels of the technologies employed are extremely uneven. Three scenarios with different technological improvements are defined to estimate the emissions of the six sub-sectors and analyze the implied reduction potential in the near future. The results highlight the pivotal role that regulation and policy administration could play in controlling the CO 2 emissions by promoting average technology performances in this industry.

Quantifying the emissions reduction effectiveness and costs of oxygenated gasoline

International Nuclear Information System (INIS)

Lyons, C.E.

1993-01-01

During the fall, winter, and spring of 1991-1992, a measurement program was conducted in Denver, Colorado to quantify the technical and economic effectiveness of oxygenated gasoline in reducing automobile carbon monoxide (CO) emissions. Emissions from 80,000 vehicles under a variety of operating conditions were measured before, during, and after the seasonal introduction of oxygenated gasoline into the region. Gasoline samples were taken from several hundred vehicles to confirm the actual oxygen content of the fuel in use. Vehicle operating conditions, such as cold starts and warm operations, and ambient conditions were characterized. The variations in emissions attributable to fuel type and to operating conditions were then quantified. This paper describes the measurement program and its results. The 1991-1992 Colorado oxygenated gasoline program contributed to a reduction in carbon monoxide (CO) emissions from gasoline-powered vehicles. The measurement program demonstrated that most of the reduction is concentrated in a small percentage of the vehicles that use oxygenated gasoline. The remainder experience little or not reduction in emissions. The oxygenated gasoline program outlays are approximately $25 to $30 million per year in Colorado. These are directly measurable costs, incurred through increased government expenditures, higher costs to private industry, and losses in fuel economy. The measurement program determined the total costs of oxygenated gasoline as an air pollution control strategy for the region. Costs measured included government administration and enforcement, industry production and distribution, and consumer and other user costs. This paper describes the ability of the oxygenated gasoline program to reduce pollution; the overall cost of the program to government, industry, and consumers; and the effectiveness of the program in reducing pollution compared to its costs

The climate fund. Some notions on the socio-economic impacts of greenhouse gas emissions and emission reductions in an international context

International Nuclear Information System (INIS)

Tol, R.S.J.; Van der Burg, T.; Jansen, H.M.A.; Verbruggen, H.

1995-05-01

The title project investigates the possibility of setting up an international climate fund and the way in which this could be arranged. A climate fund is a potential method to enhance the efficiency and efficacy of the reduction of the increase in the amount of greenhouse gases (GHGs) in the atmosphere. It would allow countries to transfer capital, for instance through the here proposed climate fund, and to redistribute the damages caused by global warming. This project focuses on the economic aspects of a climate fund, although some attention will also be given to its political feasibility. The system of tradeable emission permits, of which joint implementation is often seen as a pilot phase, presumes that fixed emission targets exist. In this report the emissions are not prefixed, but optimised in a cost-benefit analysis in which the impact of international capital transfer is examined. In order to determine the impact of international capital transfer on the efficiency and efficacy on optimal greenhouse gas emission reduction, three building blocks are needed. The first block concerns the costs of climate change, or the benefits of climate change control. The second block concerns the costs of emission reduction. The third block is the model to integrate costs and benefits, and calculate the optimal emission control with and without international capital transfers. The project is split into four conceptual phases. In the first phase, a literature survey has been performed of the socio-economic costs and benefits of greenhouse gas emission reductions, with a particular focus on the international distribution of costs and benefits. In the second phase, the costs and benefits are modelled in the Climate Framework for Uncertainty, Negotiation and Distribution (FUND). In the third phase the optimal emission reductions are calculated with and without international capital transfers in several game-theoretic settings. (Abstract Truncated)

The ranking of negative-cost emissions reduction measures

International Nuclear Information System (INIS)

Taylor, Simon

2012-01-01

A flaw has been identified in the calculation of the cost-effectiveness in marginal abatement cost curves (MACCs). The problem affects “negative-cost” emissions reduction measures—those that produce a return on investment. The resulting ranking sometimes favours measures that produce low emissions savings and is therefore unreliable. The issue is important because incorrect ranking means a potential failure to achieve the best-value outcome. A simple mathematical analysis shows that not only is the standard cost-effectiveness calculation inadequate for ranking negative-cost measures, but there is no possible replacement that satisfies reasonable requirements. Furthermore, the concept of negative cost-effectiveness is found to be unsound and its use should be avoided. Among other things, this means that MACCs are unsuitable for ranking negative-cost measures. As a result, MACCs produced by a range of organizations including UK government departments may need to be revised. An alternative partial ranking method has been devised by making use of Pareto optimization. The outcome can be presented as a stacked bar chart that indicates both the preferred ordering and the total emissions saving available for each measure without specifying a cost-effectiveness. - Highlights: ► Marginal abatement cost curves (MACCs) are used to rank emission reduction measures. ► There is a flaw in the standard ranking method for negative-cost measures. ► Negative values of cost-effectiveness (in £/tC or equivalent) are invalid. ► There may be errors in published MACCs. ► A method based on Pareto principles provides an alternative ranking method.

[Emissions trading potential : achieving emission reductions in a cost-effective manner

International Nuclear Information System (INIS)

Fay, K.

1998-01-01

The issue of emissions trading as a viable tool to reduce greenhouse gas emissions by developed countries was discussed. The essence of this author's argument was that emissions trading alone will not solve the climate change problem and that the details of the program are hazy at best. In order to have any hope of meeting the emission reductions, it is essential to begin working out the details now, and to coordinate them with the Clean Development Mechanism (CDM) and Joint Implementation (JI) plan since all three of these flexibility mechanisms will be working in and among themselves, therefore they need to be consistent. Work on a general set of draft principles by the International Climate Change Partnership (ICCP), a coalition headquartered in Washington, DC, was summarized. Essentially, ICCP favors voluntary programs, incentives for participation, no quantitative limits on trading, no limits on sources and sinks. ICCP believes that trading should be allowed at the company level, and liability should not devolve on the buyer alone, rather, it should be negotiated between buyers and sellers. Credits for early action should also be tradable and most of all, the trading program should be simple to allow active participation by industry, and be free of bureaucratic impediments

Transition paths towards CO2 emission reduction in the steel industry

NARCIS (Netherlands)

Daniëls, Berend Wilhelm

2002-01-01

Radiative forcing, better known as the Greenhouse Effect, is probably the major 21st century environmental problem. Its probable cause is the anthropogenic emission of greenhouse gases, especially CO2. The Kyoto agreement enforces considerable reductions of the GHG emissions in 2010, with 6 to 8% of

Impact of trade in emission reduction credits on solar projects

International Nuclear Information System (INIS)

Kulkarni, P.

1993-01-01

Since the amendment of the Clean Air Act in 1990, the possibility of trading in Emission Reduction Credits has been looked upon as a strategy for improving the economic feasibility of solar projects. This paper discusses developments towards such a market and reviews current and proposed emission trading practices. The paper analyzes how the current characteristics of the market help or hinder the trading of credits generated by solar projects, and suggests possible solutions. Emission credits from four different solar projects and their trading potentials are presented

Experimental investigation on emission reduction in neem oil biodiesel using selective catalytic reduction and catalytic converter techniques.

Science.gov (United States)

Viswanathan, Karthickeyan

2018-05-01

In the present study, non-edible seed oil namely raw neem oil was converted into biodiesel using transesterification process. In the experimentation, two biodiesel blends were prepared namely B25 (25% neem oil methyl ester with 75% of diesel) and B50 (50% neem oil methyl ester with 50% diesel). Urea-based selective catalytic reduction (SCR) technique with catalytic converter (CC) was fixed in the exhaust tail pipe of the engine for the reduction of engine exhaust emissions. Initially, the engine was operated with diesel as a working fluid and followed by refilling of biodiesel blends B25 and B50 to obtain the baseline readings without SCR and CC. Then, the same procedure was repeated with SCR and CC technique for emission reduction measurement in diesel, B25 and B50 sample. The experimental results revealed that the B25 blend showed higher break thermal efficiency (BTE) and exhaust gas temperature (EGT) with lower break-specific fuel consumption (BSFC) than B50 blend at all loads. On comparing with biodiesel blends, diesel experiences increased BTE of 31.9% with reduced BSFC of 0.29 kg/kWh at full load. A notable emission reduction was noticed for all test fuels in SCR and CC setup. At full load, B25 showed lower carbon monoxide (CO) of 0.09% volume, hydrocarbon (HC) of 24 ppm, and smoke of 14 HSU and oxides of nitrogen (NOx) of 735 ppm than diesel and B50 in SCR and CC setup. On the whole, the engine with SCR and CC setup showed better performance and emission characteristics than standard engine operation.

Reduction of fields between co-axial cylinders by means of interposed screens; L'abaissement des champs entre cylindres coaxiaux au moyen d'ecrans intercales

Energy Technology Data Exchange (ETDEWEB)

Bernard, J; Bruck, H; Prevot, F

1950-05-01

The dielectric rigidity of the space between two coaxial cylinders at a given potential can be increased by interposing coaxial cylindrical screens (the method of C. M. Turner, Thesis, Univ. of Wisconsin, 1943). The combination of screens reducing the maximum value of a simple field between two cylinders is calculated as a function of number of screens, their radius, and their potential, and, for a given number of screens, the optimum radii and potentials for maximum field reduction are determined. [French] La rigidite dielectrique de l'espace compris entre deux cylindres coaxiaux, portes a des potentiels donnes, peut etre augmentee en intercalant des ecrans cylindriques coaxiaux (methode de C.M. Turner). En fonction de leur nombre, de leur rayon et de leur potentiel, on calcule de combien ces ecrans permettent de reduire la valeur du champ regnant primitivement entre les deux cylindres, et, pour un nombre d'ecrans donne, on determine les valeurs optima de leur rayon et potentiel, correspondant a la reduction maximum des champs. (auteur)

EMISSIONS REDUCTION DATA FOR GRID-CONNECTED PHOTOVOLTAIC POWER SYSTEMS

Science.gov (United States)

This study measured the pollutant emission reduction potential of 29 photovoltaic (PV) systems installed on residential and commercial building rooftops across the U.S. from 1993 through 1997. The U.S. Environmental Protection Agency (EPA) and 21 electric power companies sponsor...

A supply chain optimization framework for CO2 emission reduction : Case of the Netherlands

NARCIS (Netherlands)

Kalyanarengan Ravi, N.; Zondervan, E.; van Sint Annaland, M.; Fransoo, J.C.; Grievink, J.; Claus, T.; Herrmann, F.; Manitz, M.; Rose, O.

2016-01-01

A major challenge for the industrial deployment of a CO2 emission reduction methodology is to reduce the overall cost and the integration of all the nodes in the supply chain for CO2 emission reduction. In this work, we develop a mixed integer linear optimization model that selects appropriate

Assesment of Energy Options for CO2 Emission Reduction

International Nuclear Information System (INIS)

Cavlina, Nikola

2014-01-01

Since the 1992 Earth Summit in Rio de Janeiro, global anthropogenic CO 2 emissions grew by 52% which caused an increase in 10.8% in the CO 2 concentration in the atmosphere, and it tipped the 400 ppm mark in May 2013. The Fifth Assessment Report on climate impacts from the Intergovernmental Panel on Climate Change (IPCC) confirmed earlier warnings that climate change is already stressing human communities, agriculture, and natural ecosystems, and the effects are likely to increase in the future. While European Union has long been committed to lowering carbon emissions, this places additional pressure on current EU goals for energy sector that includes significant reduction of CO 2 emissions. Current EU commitment has been formalized in so-called '20-20-20' plan, reducing carbon emissions, increasing energy efficiency and increasing energy production from renewables by 20% by 2020. Some EU member states are even more ambitious, like United Kingdom, planning to reduce carbon emissions by 80% by 2050. Bulk of carbon reduction will have to be achived in energy sector. In the power industry, most popular solution is use of solar and wind power. Since their production varies significantly during the day, for the purpose of base-load production they can be paired with gas-fired power plant. Other possible CO 2 -free solution is nuclear power plant. In this invited lecture, predicted cost of energy production for newly bulit nuclear power plant and newly built combination of wind or solar and gas-fired power plant are compared. Comparison was done using Levelized Unit of Energy Cost (LUEC). Calculations were performed using the Monte Carlo method. For input parameters that have biggest uncertainty (gas cost, CO 2 emission fee) those uncertainties were addressed not only through probability distribution around predicted value, but also through different scenarious. (author)

Suppression of nitrogen oxides emission by carbonaceous reductants

International Nuclear Information System (INIS)

Tomita, A.

2001-01-01

The present status of NO x emission from power stations and automobiles is first summarized, and the controlling regulations in respective areas are reviewed. In spite of much progress, we have to further reduce the NO x emission in all the areas. In order to develop more effective technology, the fundamental understanding of the relevant reactions is essential. The heterogeneous reactions, like NO x and N 2 O formation from coal char, NO x and N 2 O reduction with carbon, and NO x reduction with hydrocarbon gases over heterogeneous catalysts are not well understood yet. This paper briefly summarizes our recent studies on the heterogeneous reactions of NO x formation and destruction. The importance of surface nitrogen species is emphasized in all the reaction systems. The presence of such surface species plays a very important role, not only in NO x destruction on carbon surfaces, but also in the NO x release during coal char combustion. Finally, future research areas are identified, where we need to understand what actually happens under high-temperature reaction conditions

Estimating CO2 Emission Reduction of Non-capture CO2 Utilization (NCCU) Technology

International Nuclear Information System (INIS)

Lee, Ji Hyun; Lee, Dong Woog; Gyu, Jang Se; Kwak, No-Sang; Lee, In Young; Jang, Kyung Ryoung; Shim, Jae-Goo; Choi, Jong Shin

2015-01-01

Estimating potential of CO 2 emission reduction of non-capture CO 2 utilization (NCCU) technology was evaluated. NCCU is sodium bicarbonate production technology through the carbonation reaction of CO 2 contained in the flue gas. For the estimating the CO 2 emission reduction, process simulation using process simulator (PRO/II) based on a chemical plant which could handle CO 2 of 100 tons per day was performed, Also for the estimation of the indirect CO 2 reduction, the solvay process which is a conventional technology for the production of sodium carbonate/sodium bicarbonate, was studied. The results of the analysis showed that in case of the solvay process, overall CO 2 emission was estimated as 48,862 ton per year based on the energy consumption for the production of NaHCO 3 (7.4 GJ/tNaHCO 3 ). While for the NCCU technology, the direct CO 2 reduction through the CO 2 carbonation was estimated as 36,500 ton per year and the indirect CO 2 reduction through the lower energy consumption was 46,885 ton per year which lead to 83,385 ton per year in total. From these results, it could be concluded that sodium bicarbonate production technology through the carbonation reaction of CO 2 contained in the flue was energy efficient and could be one of the promising technology for the low CO 2 emission technology.

Air pollution emission reduction techniques in combustion plants; Technique de reduction des emissions de polluants atmospheriques dans les installations de combustion

Energy Technology Data Exchange (ETDEWEB)

Bouscaren, R. [CITEPA, Centre Interprofessionnel Technique d`Etudes de la Pollution Atmospherique, 75 - Paris (France)

1996-12-31

Separating techniques offer a large choice between various procedures for air pollution reduction in combustion plants: mechanical, electrical, filtering, hydraulic, chemical, physical, catalytic, thermal and biological processes. Many environment-friendly equipment use such separating techniques, particularly for dust cleaning and fume desulfurizing and more recently for the abatement of volatile organic pollutants or dioxins and furans. These processes are briefly described

Possibilities for the emissions reduction of smoke particles in the flue emissions of diesel motors

International Nuclear Information System (INIS)

Mikarovska Vesna; Stojanovski, Vasko

2000-01-01

Taking into consideration the fact that the traffic needs have been increased, the international committee through its associations make efforts in order to find more effective measures for the environmental protection. In this contest the international regulations are very rigorous towards the quality and quantity of the exhaust gases emission from the engines with internal combustion. In this paper the normative and limitations of the exhaust emission of compression ignition engines are presented. Also, the results from experimental investigations of transport vehicles with different time of exploitation and passed kilometers are given, as well as the factors that influent to the smoke component reduction in exhaust emission. (Authors)

Syncrude emissions reduction project

Energy Technology Data Exchange (ETDEWEB)

Fiedler, M.A. [Alstom Power Inc., Knoxville, TN (United States); Ibbotson, P. [Syncrude Canada Ltd., Calgary, AB (Canada)

2008-07-01

This paper described an emissions reduction project conducted by Syncrude Canada and various other companies currently developing and processing oil sands in Alberta. Syncrude's upgrader expansion program included the installation of an ammonia-based wet flue gas desulfurizer (FGD) designed to remove sulphur dioxide (SO{sub 2}) from a coker train. Syncrude is also installing the FGD technology at its existing plants. It is expected that installation of the FGDs will reduced total site emissions of SO{sub 2} by 60 per cent. The fluid cokers are used to crack the long hydrocarbon chain bitumen molecules into shorter molecules. It is expected that the FGD system will also reduce particulate and SO{sub 3} levels. The FGD system was selected after an evaluation of technologies used by the coal-fired power industry. A dry FGD system was selected to operate above the water saturation temperature of the flue gas. Calcium oxide was used as a reagent. Hot gas was quenched in a spray dryer absorber with a slurry of calcium hydroxide. Rotary atomizers were used to developer uniform droplets of slurry. The system's fabric filter was a low ratio reverse gas-cleaned unit. Particulate matter from the gases was deposited on the interior of the filter bags. Clean hot gas was drawn through reverse gas fans into a reverse gas manifold. A timeline of the FGD technology installation process was included. 3 tabs., 28 figs.

Proceedings of the 1997 diesel engine emissions reduction workshop

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

This conference was held July 28--31, 1997 in La Jolla, California. The purpose of this conference was to provide a multidisciplinary forum for exchange of state-of-the-art information on diesel engine emissions issues. Diesel engine manufacturers have significantly reduced emission of nitrogen oxides and particulates over the last 12 years. Currently there is concern about the 4% contribution of carbon dioxide from the combustion of fossil fuels to the atmosphere and its role in the greenhouse effect. The 56 papers in this report are arranged under the following topical headings: Agency diesel engine emissions and concerns; Human health effects -- Diesel exhaust; Aftertreatment -- Non-thermal plasma; Aftertreatment and in-cylinder emissions reduction; Combustion, fuel, and air management; Fuels and associated technology; and Advanced technology. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

Process industry energy retrofits: the importance of emission baselines for greenhouse gas reductions

International Nuclear Information System (INIS)

Aadahl, Anders; Harvey, Simon; Berntsson, Thore

2004-01-01

Fuel combustion for heat and/or electric power production is often the largest contributor of greenhouse gas (GHG) emissions from an industrial process plant. Economically feasible options to reduce these emissions include fuel switching and retrofitting the plant's energy system. Process integration methods and tools can be used to evaluate potential retrofit measures. For assessing the GHG emissions reduction potential for the measures considered, it is also necessary to define appropriate GHG emission baselines. This paper presents a systematic GHG emission calculation method for retrofit situations including improved heat exchange, integration of combined heat and power (CHP) units, and combinations of both. The proposed method is applied to five different industrial processes in order to compare the impact of process specific parameters and energy market specific parameters. For potential GHG emission reductions the results from the applied study reveal that electricity grid emissions are significantly more important than differences between individual processes. Based on the results of the study, it is suggested that for sustainable investment decision considerations a conservative emission baseline is most appropriate. Even so, new industrial CHP in the Northern European energy market could play a significant role in the common effort to decrease GHG emissions

Carbon flow analysis and Carbon emission reduction of FCC in Chinese oil refineries

Science.gov (United States)

Jia, Fengrui; Wei, Na; Ma, Danzhu; Liu, Guangxin; Wu, Ming; Yue, Qiang

2017-08-01

The major problem of the energy production in oil refineries is the high emission of CO2 in China. The fluid catalytic cracking unit (FCC) is the key source of carbon emission in the oil refineries. According to the statistical data, the carbon emission of FCC unit accounts for more than 31% for the typical oil refineries. The carbon flow of FCC in the typical Chinese oil refineries were evaluated and analysed, which aimed at the solution of CO2 emission reduction. The method of substances flow analysis (SFA) and the mathematical programming were used to evaluate the carbon metabolism and optimize the carbon emission. The results indicated that the combustion emission of the reaction-regeneration subsystem (RRS) was the major source of FCC. The quantity of CO2 emission of RSS was more than 90%. The combustion efficiency and the amount of residual oil affected the carbon emission of RRS most according to the optimized analysis of carbon emission reduction. Moreover, the fractionation subsystem (TFS) had the highest environmental efficiency and the absorption-stabilization subsystem (ASS) had the highest resource efficiency (approximately to 1) of carbon.

Reduction of EMC Emissions in Mixed Signal Integrated Circuits with Embedded LIN Driver

Directory of Open Access Journals (Sweden)

P. Hartl

2016-06-01

Full Text Available This paper describes several methods for reduction of electromagnetic emissions (EME of mixed signal integrated circuits (IC. The focus is on the impact that a LIN bus communication block has on a complex IC which contains analog blocks, noisy digital block, micro-core (µC and several types of memories. It is used in an automotive environment, where EMC emission reduction is one of the key success factors. Several proposed methods for EME reduction are described and implemented on three test chips. These methods include current consumption reduction, internal on-chip decoupling, ground separation and different linear voltage regulator topologies. Measurement results of several fabricated test chips are shown and discussed.

Climate and mortality changes due to reductions in household cooking emissions

Science.gov (United States)

Bergman, Tommi; Mielonen, Tero; Arola, Antti; Kokkola, Harri

2016-04-01

Household cooking is a significant cause for health and environmental problems in the developing countries. There are more than 3 billion people who use biomass for fuel in cooking stoves in their daily life. These cooking stoves use inadequate ventilation and expose especially women and children to indoor smoke. To reduce problems of the biomass burning, India launched an initiative to provide affordable and clean energy solutions for the poorest households by providing clean next-generation cooking stoves. The improved cooking stoves are expected to improve outdoor air quality and to reduce the climate-active pollutants, thus simultaneously slowing the climate change. Previous research has shown that the emissions of black carbon can be decreased substantially, as much as 90 % by applying better technology in cooking stoves. We have implemented reasonable (50% decrease) and best case (90% decrease) scenarios of the reductions in black and organic carbon due to improved cooking stoves in India into ECHAM-HAMMOZ aerosol-climate model. The global simulations of the scenarios will be used to study how the reductions of emissions in India affect the pollutant concentrations and radiation. The simulated reductions in particulate concentrations will also be used to estimate the decrease in mortality rates. Furthermore, we will study how the emission reductions would affect the global climate and mortality if a similar initiative would be applied in other developing countries.

Measures on fireside emission reduction during wood combustion in industrial furnaces; Massnahmen zur feuerungsseitigen Emissionsminderung bei der Holzverbrennung in gewerblichen Feuerungsanlagen

Energy Technology Data Exchange (ETDEWEB)

Zuberbuehler, U.

2002-07-01

concentrations were lower than 50 mg/m{sup 3} without additional precipitation. The test results showed that primary emission reduction depends strictly on the combustion conditions in the furnace. That requires high standards on measuring and control technology as well as on homogeneity of the fuel. Numerical simulations of the combustion process in the primary and secondary part of the furnace were used to provide a complex view of important parameters as temperature, residence time, velocity and oxygen concentration at any position in the furnace. The results showed that numerical simulation is a powerful instrument for furnace design and construction. Further numerical simulation enable the optimisation of combustion parameter setting to achieve maximal primary emission reduction. (orig.) [German] Gegenwaertig werden in gewerblichen Holzfeuerungsanlagen beim Verbrennen von naturbelassenem Holz NO{sub x}-Werte <200 mg/m{sup 3} und Partikelkonzentrationen <50 mg/m{sup 3} erreicht. Mit Brennstoffen aus der Holzwerkstoffbearbeitung, wie sie insbesondere in holzbe- und -verarbeitenden Betrieben anfallen, koennen die NO{sub x}-Konzentrationen bis zu 1000 mg/m{sup 3} und die Partikelkonzentrationen bis zu 500 mg/m{sup 3} erreichen. In dieser Arbeit wurde ein neues Feuerungskonzept zur Verbesserung des Partikelausbrandes und der gleichzeitigen feuerungsseitigen NO{sub x}-Minderung entwickelt und getestet. Ausgehend vom Stand der Technik, einer modernen {lambda}- und temperaturgeregelten Unterschubfeuerung, wurde zunaechst durch einen raeumlich geteilten Feuerraum eine gestufte Verbrennung realisiert. Die Ausbrandzone dieser zweistufigen Feuerung wurde dabei so gestaltet, dass sie aufgrund der dortigen Stroemungsfuehrung gleichzeitig als Partikelabscheider wirkt. D.h. grobe Partikel werden im heissen Teil des Feuerraumes abgeschieden und koennen dort ausgebrannt werden. In einem weiteren Schritt wurde der Primaerteil des Feuerraumes durch Vergroesserung und Gasrueckfuehrung

Comparison of fission probabilities with emission of long range particles under the action of slow and fast neutrons on various materials; Probabilites comparees de fission avec emission de particules de long parcours pour divers materiaux sous l'action des neutrons lents et rapides

Energy Technology Data Exchange (ETDEWEB)

Netter, F; Faraggi, H; Garin-Bonnet, A; Julien, J; Corge, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Turkiewicz, J [Institut de Recherches Nucleaire de Varsovie (Poland)

1958-07-01

The authors describe relative cross-section measurements of fission of the isotopes of uranium and plutonium (more particularly {sup 235}U, {sup 238}U, {sup 239}Pu), with emission of long range particles, under the action of neutrons of various energies: thermal neutrons, pile neutrons, neutrons produced with the Van de Graaff accelerator by reaction of protons on tritium. The measurements are carried out: 1) with the aid of photographic plates, by submitting to the action of the neutrons a layer of fissile material coupled with an Ilford nuclear emulsion of 200 microns; a tin sheet laying between the plate and the layer stops the {alpha} particles and the fission fragments. By an appropriate development the tracks of the long range particles can be distinguished in the emulsion, from the tracks of the recoil protons resulting of fission neutrons, or of the last primary neutrons. For neutrons of energy under 1 MeV, the compared frequency of the tracks of long range particles and of the recoils caused by the fission neutrons gives a measurement of the fission cross-section with emission of long range particles relative to the product of the fission cross-section by the mean number of neutrons emitted by fission. For neutrons of higher energy, one measures only the frequency of the tracks of long range particles, comparatively with the flux of primary neutrons. Some precautions are taken to eliminate the action of thermal neutrons in the measurements with fast neutrons. 2) with the aid of a system of ionization chamber and proportional counter, the rate of coincidence between the impulsions caused by the long range particles and the impulsions provided by one of the fission fragments is measured comparatively with the counting rate of fission fragme (author) [French] Les auteurs decrivent des mesures relatives a la section efficace de fission des isotopes de l'uranium et du plutonium (notamment {sup 235}U, {sup 238}U, {sup 239}Pu) avec emission de particules de long

Options for the reduction of gases emissions of greenhouse effect (GEI), Colombia 1998 -2010

International Nuclear Information System (INIS)

Rodriguez M, Humberto; Gonzalez B, Fabio

1999-01-01

Taking into account the greenhouse gas emissions for Colombia in year 2010, different options for reduction of GHG emissions were considered. Twenty-four options were evaluated from economical and technical points of view, with a total reduction potential of 31.7 M ton/ year of CO 2 equivalent. About 75% of this potential could be developed in the forestry sector and 25% in energy projects. If the proposed measures can to be implemented, the country's emissions will be 143.5 M ton/year of co2 by 2010: this means that Colombia will have lowered its emissions not only to the 1990 level but down to 14% below this level

Linked Analysis of East Asia Emission Reduction Pathways

Science.gov (United States)

Kim, Y.; Woo, J. H.; Bu, C.; Lee, Y.; Kim, J.; Jang, Y.; Park, M.

2017-12-01

Air pollution and its impacts over the Northeast Asia are very severe because of the massive pollutant emissions and high population. Korea has been trying to improve air quality with the enhanced environmental legislation. The air quality over Korea, however, does not entirely dependent on its local emissions. Transboundary air pollution from China highly affects Korean atmosphere. The purpose of this research is to understand role of local and transbounday efforts to improve air quality changes over Korea. In this research, we have tried to set up the multiple emission scenario pathways for Korea and China using IIASA's GAINS (Greenhouse gas - Air pollution Interactions aNd Synergies) modeling framework. More up-to-date growth factors and control policy packets were made using regional socio-economic data and control policy information from local governments and international statistics. Four major scenario pathways, 1) Base (Baseline: current legislation), 2) OTB/OTB(On the book/On the way : existing control measure/planed control measure), 3) BOTW_GHG(Beyond on the way : OTW with GHG reduction plan), 4) BOTW_NH3 (OTW with additional NH3 reduction measure) were developed to represent air quality improvement pathways in consideration of both Korean and Chinese efforts. Strict ambient PM2.5 standards from Seoul metropolitan Air quality Improvement Plan(SAIP) seems too enthusiastic without linking air quality control efforts of China. Step-by-step emission controls and following air quality, control cost, health impact from each scenario will be presented at the conference. This subject is supported by Korea Ministry of Environment as "Climate Change Correspondence Program". And This work was supported under the framework of national strategy project on fine particulate matters by Ministry of Science, ICT and Future Planning.

Developpements numeriques recents realises en aeroelasticite chez Dassault Aviation pour la conception des avions de combat modernes et des avions d’affaires

Science.gov (United States)

2003-03-01

Cost through Advanced Modelling and Virtual Simulation [La reduction des couts et des delais d’acquisition des vehicules militaires par la modelisation...sont les 6quations de restitution, par le mod~e, des frdquences et des amortissements des modes adrodlastiques mesurds h une prdcision F- donnde. Afin... amortissements mesurds h 37800 Pa et 60000 Pa (points nettemnent inferieurs A la vitesse critique). Comme le montre ce diagramme, le calcul, recal6 h

Laser diagnosis and plasma technology: Fundamentals for reduction of emissions and fuel consumption in DI internal combustion engines. Sub-project: Purification of diesel exhaust in pulsed plasma. Final report; Laserdiagnostische und plasmatechnologische Grundlagen zur Verminderung von Emissionen und Kraftstoffverbrauch von DI-Verbrennungsmotoren. Teilvorhaben: Reinigung von Dieselabgasen in gepulsten Plasmen. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Hammer, T.; Kishimoto, T.; Birckigt, R.

2000-12-01

Selective catalytic reduction using ammonia based reducing agents is known to reduce the NOx-emissions from Diesel cars. However, it does not work efficiently under cold starting and urban driving conditions, because efficient reduction requires catalyst temperatures above 170 C. Without additional measures, pulsed plasma treatment does not cause reduction but mainly oxidation of nitric oxides preferably emitted as NO. By the combination of pulsed DBD-plasma treatment with selective catalytic reduction efficient NOx-reduction was obtained at catalyst temperatures below 170 C. It could be shown, that this low temperature reduction is a synergistic effect caused by plasma induced oxidation of some fraction of the NO. Based on this knowledge of the reaction mechanism plasma- and SCR-reactors were built, which were tested on a test bench equipped with a modern cars Diesel engine. Under cold starting and urban driving conditions by application of average plasma powers below 300 W the NOx-emissions were reduced for about 60%, the maximum degree of NOx-reduction was 85%. The plasma induced removal of hydrocarbons and particles, as well as the formation of by-products and the influence of hydrocarbons on the plasma induced selective catalytic reduction processes were investigated. No disadvantageous by-products could be found. (orig.) [German] Die selektive katalytische Reduktion mit Ammoniak als Reduktionsmittel ist ein bekanntes Verfahren zur Reduktion der Stickoxidemissionen von Diesel-Pkw, arbeitet aber erst ab Katalysatortemperaturen oberhalb 170 C und ist damit unter Kaltstart- und Stadtverkehrsbedingungen wenig wirksam. Gepulste Plasmen bewirken ohne zusaetzliche Massnahmen keine ausreichende chemische Reduktion sondern ueberwiegend Oxidation der als NO emittierten Stickoxide. Durch Kombination von DBE-Plasmen mit der selektiven katalytischen Reduktion hingegen konnte auch bei Katalysatortemperaturen unter 170 C wirkungsvolle NOx-Reduktion erzielt werden. Es konnte

Cost-Effectiveness of Emission Reduction for the Indonesian Coal-Fired Power Plants

NARCIS (Netherlands)

Handayani, Kamia; Krozer, Yoram

2014-01-01

This paper presents the result of research on the cost-effectiveness of emission reduction in the selected coal-fired power plants (CFPPs) in Indonesia. The background of this research is the trend of more stringent environmental regulation regarding air emission from coal-fired power plants (CFPPs)

Urban passenger transport energy saving and emission reduction potential: A case study for Tianjin, China

International Nuclear Information System (INIS)

Peng, Binbin; Du, Huibin; Ma, Shoufeng; Fan, Ying; Broadstock, David C.

2015-01-01

Highlights: • Potential to reduce urban passenger transport is projected between 2010 and 2040. • Four scenarios reflecting different policy mixes are considered. • The potential for energy conservation and emission reductions are obtained. • Vehicle population regulation is most effective in energy saving and reducing overall GHG. • Emission standards are the most effective measure to reduce pollutant emissions. - Abstract: With rapid growth of the vehicle population, urban passenger transport in China is largely responsible for increases in energy consumption, greenhouse gas (GHG) emissions, and also atmospheric pollutants (NO x , CO, HC, PM). In this paper, we first develop an urban passenger transport energy saving and emission reduction potential evaluation model using the “Long Range Energy Alternatives Planning (LEAP)” tool; and then take Tianjin city as an empirical case to evaluate the reduction potential of final energy consumption, GHG emissions and pollutants emissions of Tianjin’s urban passenger transport sector between 2010 and 2040 under four scenarios, i.e. BAU (business as usual) scenario, PP (the 12th five-year plan policy) scenario, CP (comprehensive policy) scenario and HP (hybrid policy of PP and CP) scenario. The results show that due to the public transport promotion, energy consumption and CO 2 emissions in 2040 can be reduced by 22% and 22.6% in the PP scenario, compared to BAU. The largest reductions in energy consumption, CO 2 and atmospheric pollutants emissions can be achieved under CP scenario, in which vehicle population regulation is the most effective to be implemented. Emissions standard regulation is the most effective measure to reduce atmospheric pollutant emissions in all the scenarios and green energy promotion is especially effective to reduce NO x and PM

Background information on a multimedia nitrogen emission reduction strategy; Hintergrundpapier zu einer multimedialen Stickstoffemissionsminderungsstrategie

Energy Technology Data Exchange (ETDEWEB)

Geupel; Jering; Frey (and others)

2009-04-15

The background information report on a multimedia nitrogen reduction strategy covers the following chapters: 1. Introduction: the nitrogen cascade and the anthropogenic influence, environmental impact of increased nitrogen emissions and effects on human health. 2. Sources and balancing of anthropogenic nitrogen emissions in Germany. 3. Environmental quality targets, activity goals of environmental measures and instruments of an integrated nitrogen reduction strategy. 4. Conclusions and perspectives. The attachments include emission sources, nitrogen release and nitrogen transport in Germany; catalogue of measures and instruments according the criteria efficiency and cost-efficacy.

Abatement of CO{sub 2} emissions: IFP's solutions; Reduction des emissions de CO{sub 2}: les solutions IFP

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

In a context of increasing energy consumption and world economic growth, the fight against greenhouse gases has become a major technological challenge for the coming years. The capture and sequestration of CO{sub 2} in the underground is a promising solution in terms of environmental impact, especially in places and sectors characterized by a strong concentration of CO{sub 2} emissions (power generation plants, big industries). However, such a solution requires important R and D efforts to reduce the costs and warrant the long-term reliability of the storage. The French institute of petroleum (IFP) will play an important role in the implementation of the geological sequestration. This press kit comprises 7 documents: a press release from November 4, 2003; a press conference with a series of slides presenting the stakes, solutions and actions proposed by the IFP in collaboration with several foreign partners (CO{sub 2} capture, storage in depleted hydrocarbon deposits, saline aquifers or abandoned coal seams, storage potential, reduction of costs); a summary of the stakes and solutions for CO{sub 2} sequestration in deep underground; a similar document presented at the Panorama 2003 colloquium; the CO{sub 2} constraint in France and in Europe (international consensus on climatic change, Kyoto protocol, European directive about tradable carbon permits, voluntary commitment of companies in the fight against greenhouse effects (AERES)); the European project Castor (CO{sub 2} from capture to storage); and the IFP brochure 'innovating for a sustainable development in the energy domain'. (J.S.)

Temperature behaviour of photo-emissive films. The case of photo-multipliers used in scintillation counters; Comportement en temperature des couches photoemissives. Cas des photomultiplicateurs utilises dans les compteurs a scintillations

Energy Technology Data Exchange (ETDEWEB)

Ardalan, A H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1966-07-01

This work concerns the changes in the spectral sensitivity of 3 types of normal photo-cathodes (Cs{sub 3}Sb, tri-alkali and bi-alkali without cesium) as a function of temperature. The photo-cathodes of cathodes of commercial photomultipliers (DARIO, E.M.I., R.C.A., A.S.C.O.F.) were used for these tests. The temperature range studied was -25 C to +55 C (except for the bi-alkali photo-cathodes which were tested up to +150 C) and the wave-length range was 3250 to 7000 angstrom. After a brief review of photo-electric effect theories, the experimental device is described and the measurement results presented. Finally, an interpretation of these results is proposed. For the normal range of scintillator emission, i.e. between 3000 and 5000 angstroms (Na I (Tl), plastics, anthracene) the temperature coefficient is always negative: -0.15 % C for Cs{sub 3}Sb and up to -0.5 % C for the most temperature-sensitive photo-cathode. Above 5000 angstrom, the temperature coefficient of Cs{sub 3}Sb films becomes positive: +0.5 % C on the overage. The accuracy of the spectral sensitivity measurements is {+-}4 % in absolute value and {+-}1 % in relative value. (author) [French] Cette etude porte sur la variation de la sensibilite spectrale de 3 types de photocathodes usuelles (Cs{sub 3}Sb, trialcalines et bialcalines sans cesium) en fonction de la temperature. Des photocathodes de photomultiplicateurs du commerce (DARIO, E.M.I., R.C.A., A.S.C.O.P.) ont fait l'objet de ces essais. Le domaine examine s'etendait en temperature de -25 C a +55 C (sauf pour les photocathodes bialcalines qui ont ete portees a une temperature de +150 C) et en longueur d'onde de 3250 a 7000 angstrom. Apres un rappel des theories de l'effet photoelectrique, le dispositif experimental est decrit et les resultats des mesures exposes. Enfin, une interpretation de ces resultats est proposee. Dans le domaine de l'emission des scintillateurs usuels, c'est-a-dire entre 3000 et 5000 angstrom (Na I (Tl), plastiques

POTENTIAL HEALTH RISK REDUCTION ARISING FROM REDUCED MERCURY EMISSIONS FROM COAL FIRED POWER PLANTS.

Energy Technology Data Exchange (ETDEWEB)

Sullivan, T. M.; Lipfert, F. W.; Morris, S. C.; Moskowitz, P. D.

2001-09-01

The U.S. Environmental Protection Agency (EPA) has announced plans to regulate mercury (Hg) emissions from coal-fired power plants. EPA has not prepared a quantitative assessment of the reduction in risk that could be achieved through reduction in coal plant emissions of Hg. To address this issue, Brookhaven National Laboratory (BNL) with support from the U.S. Department of Energy Office of Fossil Energy (DOE FE) prepared a quantitative assessment of the reduction in human health risk that could be achieved through reduction in coal plant emissions of Hg. The primary pathway for Hg exposure is through consumption of fish. The most susceptible population to Hg exposure is the fetus. Therefore the risk assessment focused on consumption of fish by women of child-bearing age. Dose response factors were generated from studies on loss of cognitive abilities (language skills, motor skills, etc.) by young children whose mothers consumed large amounts of fish with high Hg levels. Population risks were estimated for the general population in three regions of the country, (the Midwest, Northeast, and Southeast) that were identified by EPA as being heavily impacted by coal emissions. Three scenarios for reducing Hg emissions from coal plants were considered: (1) A base case using current conditions; (2) A 50% reduction; and, (3) A 90% reduction. These reductions in emissions were assumed to translate linearly into a reduction in fish Hg levels of 8.6% and 15.5%, respectively. Population risk estimates were also calculated for two subsistence fisher populations. These groups of people consume substantially more fish than the general public and, depending on location, the fish may contain higher Hg levels than average. Risk estimates for these groups were calculated for the three Hg levels used for the general population analyses. Analysis shows that the general population risks for exposure of the fetus to Hg are small. Estimated risks under current conditions (i.e., no

NOx reduction and NO2 emission characteristics in rich-lean combustion of hydrogen

OpenAIRE

Shudo, Toshio; Omori, Kento; Hiyama, Osamu

2008-01-01

Hydrogen is a clean alternative to conventional hydrocarbon fuels, but it is very important to reduce the nitrogen oxides (NOx) emissions generated by hydrogen combustion. The rich-lean combustion or staged combustion is known to reduce NOx emissions from continuous combustion burners such as gas turbines and boilers, and NOx reduction effects have been demonstrated for hydrocarbon fuels. The authors applied rich-lean combustion to a hydrogen gas turbine and showed its NOx reduction effect in...

The relative magnitude of the impacts and effects of GHG-related emission reductions

International Nuclear Information System (INIS)

Chiotti, Q.; Urquizo, N.

2000-01-01

A preliminary assessment of the current knowledge related to the co-benefits associated with climate change mitigation was provided in this document. One of the benefits of the reduction of greenhouse gas emissions is the reduction of other pollutants like sulphur dioxide, nitrogen oxides, carbon monoxide, volatile organic compounds, particulate matter, ground-level ozone, heavy metals and other toxic pollutants. Since these pollutants have an effect on acid deposition, ozone depletion and air quality, the environment, social welfare and human health, this paper provided an initial outline of the complex processes, interactions and uncertainties associated with this issue. Fossil fuels represent the major source of greenhouse gas (GHG) emissions in Canada. The reduction of emissions of GHG could have an impact on the Long Range Transport of air toxic substances, would help increase oxygen concentrations in the Northern Hemisphere, and lead to less carbon monoxide being released in the atmosphere, among others effects. Reductions of GHG emissions would also have an impact on ecosystems by reducing ground-level ozone concentrations. There would be less acid deposition and more dissolved organic carbon, allowing less ultraviolet-B penetration in aquatic ecosystems. In the case of human health, improved air quality impacts on the avoidance of premature mortality and reduced morbidity. Numerous other co-benefits were listed and discussed in this document. The first section stated the purpose and objectives. In section 2, that authors described the science and policy context and discussed building an analytical framework in section 3. The impact of GHG emission reductions on atmospheric pollution and ecosystems was dealt with in section 4 and section 5 was devoted to providing an assessment of the relative magnitude of effects. In section 6, the significance of scope was reviewed, and the authors concluded with section 7 in which they discussed the next steps: phase II

Markets for renewable energy and pollution emissions: Environmental claims, emission-reduction accounting, and product decoupling

International Nuclear Information System (INIS)

Moore, Michael R.; Lewis, Geoffrey McD.; Cepela, Daniel J.

2010-01-01

Green electricity generation can provide an indirect route to cleaner air: by displacing generation from fossil fuels, green electricity can reduce emissions of CO 2 and conventional air pollutants. Several types of voluntary markets have emerged in the United States to take advantage of this relationship, including green electricity programs, carbon offsets, and renewable energy certificates. At the same time, regulators are favoring cap-and-trade mechanisms for regulating emissions. This paper describes the appropriate framing of environmental claims for green electricity products. We apply an accounting framework for evaluating claims made for capped pollutants, with entries for emissions, avoided emissions due to green electricity, and unused emission permits. This framework is applied in case studies of two major electric utilities that operate with green electricity programs and capped pollutants. The cases demonstrate that the relative magnitude of 'unused permits' and 'emissions avoided' is a key relationship for evaluating an emissions reduction claim. Lastly, we consider the evolution of the green electricity marketplace given the reliance on cap-and-trade. In this setting, pollution-emission products could be decoupled from one another and from the various green electricity products. Several positive consequences could transpire, including better transparency of products, lower certification costs, and more product choices.

Markets for renewable energy and pollution emissions. Environmental claims, emission-reduction accounting, and product decoupling

Energy Technology Data Exchange (ETDEWEB)

Moore, Michael R.; Cepela, Daniel J. [University of Michigan, MI (United States); Lewis, Geoffrey McD. [University of Waterloo, ON (Canada)

2010-10-15

Green electricity generation can provide an indirect route to cleaner air: by displacing generation from fossil fuels, green electricity can reduce emissions of CO{sub 2} and conventional air pollutants. Several types of voluntary markets have emerged in the United States to take advantage of this relationship, including green electricity programs, carbon offsets, and renewable energy certificates. At the same time, regulators are favoring cap-and-trade mechanisms for regulating emissions. This paper describes the appropriate framing of environmental claims for green electricity products. We apply an accounting framework for evaluating claims made for capped pollutants, with entries for emissions, avoided emissions due to green electricity, and unused emission permits. This framework is applied in case studies of two major electric utilities that operate with green electricity programs and capped pollutants. The cases demonstrate that the relative magnitude of 'unused permits' and 'emissions avoided' is a key relationship for evaluating an emissions reduction claim. Lastly, we consider the evolution of the green electricity marketplace given the reliance on cap-and-trade. In this setting, pollution-emission products could be decoupled from one another and from the various green electricity products. Several positive consequences could transpire, including better transparency of products, lower certification costs, and more product choices. (author)

Markets for renewable energy and pollution emissions: Environmental claims, emission-reduction accounting, and product decoupling

Energy Technology Data Exchange (ETDEWEB)

Moore, Michael R., E-mail: micmoore@umich.ed [University of Michigan, MI (United States); Lewis, Geoffrey McD. [University of Waterloo, ON (Canada); Cepela, Daniel J. [University of Michigan, MI (United States)

2010-10-15

Green electricity generation can provide an indirect route to cleaner air: by displacing generation from fossil fuels, green electricity can reduce emissions of CO{sub 2} and conventional air pollutants. Several types of voluntary markets have emerged in the United States to take advantage of this relationship, including green electricity programs, carbon offsets, and renewable energy certificates. At the same time, regulators are favoring cap-and-trade mechanisms for regulating emissions. This paper describes the appropriate framing of environmental claims for green electricity products. We apply an accounting framework for evaluating claims made for capped pollutants, with entries for emissions, avoided emissions due to green electricity, and unused emission permits. This framework is applied in case studies of two major electric utilities that operate with green electricity programs and capped pollutants. The cases demonstrate that the relative magnitude of 'unused permits' and 'emissions avoided' is a key relationship for evaluating an emissions reduction claim. Lastly, we consider the evolution of the green electricity marketplace given the reliance on cap-and-trade. In this setting, pollution-emission products could be decoupled from one another and from the various green electricity products. Several positive consequences could transpire, including better transparency of products, lower certification costs, and more product choices.

Optimal production resource reallocation for CO2 emissions reduction in manufacturing sectors

OpenAIRE

Fujii, Hidemichi; Managi, Shunsuke

2015-01-01

To mitigate the effects of climate change, countries worldwide are advancing technologies to reduce greenhouse gas emissions. This paper proposes and measures optimal production resource reallocation using data envelopment analysis. This research attempts to clarify the effect of optimal production resource reallocation on CO2 emissions reduction, focusing on regional and industrial characteristics. We use finance, energy, and CO2 emissions data from 13 industrial sectors in 39 countries from...

Deliberating emission reduction options

Energy Technology Data Exchange (ETDEWEB)

Dowd, A.M.; Rodriguez, M.; Jeanneret, T. [Commonwealth Scientific and Industrial Research Organisation CSIRO, 37 Graham Rd, Highett VIC 3190 (Australia); De Best-Waldhober, M.; Straver, K.; Mastop, J.; Paukovic, M. [Energy research Centre of the Netherlands ECN, Policy Studies, Amsterdam (Netherlands)

2012-06-15

For more than 20 years there has been a concerted international effort toward addressing climate change. International conventions, such as the United Nations Foreign Convention on Climate Change (UNFCCC; ratified in 1994), have been established by committed nations seeking to address global climate change through the reduction of greenhouse gases emitted into the Earth's atmosphere (Global CCS Institute, 2011). Long recognised as the most crucial of the greenhouse gases to impact global warming, the majority of carbon dioxide's anthropogenic global emissions are directly related to fuel combustion of which both Australia and the Netherlands' energy production is significantly reliant. Both these nations will need to consider many opinions and make hard decisions if alternative energy options are to be implemented at the scale that is required to meet international emission targets. The decisions that are required not only need to consider the many options available but also their consequences. Along with politicians, policy developers and industry, the general public also need to be active participants in deciding which energy options, and their subsequent consequences, are acceptable for implementation at the national level. Access to balanced and factual information is essential in establishing informed opinions on the many policy options available. Past research has used several methods to measure public perceptions and opinions yet for complex issues, such as emission reduction, some of these methods have shown to be problematic. For example, semi structured interviews can provide data that is flexible and context rich yet is does also come with the limitations such as it seldom provides a practical assessment that can be utilised from researcher to researcher, across disciplines and public participation techniques. Surveys on the other hand usually address these limitations but surveys that do not encourage comparison of information or ask

Deliberating emission reduction options

Energy Technology Data Exchange (ETDEWEB)

Dowd, A. M.; Rodriguez, M.; Jeanneret, T. [Commonwealth Scientific and Industrial Research Organisation CSIRO, 37 Graham Rd, Highett VIC 3190 (Australia); De Best-Waldhober, M.; Straver, K.; Mastop, J.; Paukovic, M. [Energy research Centre of the Netherlands ECN, Policy Studies, Amsterdam (Netherlands)

2012-06-15

For more than 20 years there has been a concerted international effort toward addressing climate change. International conventions, such as the United Nations Foreign Convention on Climate Change (UNFCCC; ratified in 1994), have been established by committed nations seeking to address global climate change through the reduction of greenhouse gases emitted into the Earth's atmosphere (Global CCS Institute, 2011). Long recognised as the most crucial of the greenhouse gases to impact global warming, the majority of carbon dioxide's anthropogenic global emissions are directly related to fuel combustion of which both Australia and the Netherlands' energy production is significantly reliant. Both these nations will need to consider many opinions and make hard decisions if alternative energy options are to be implemented at the scale that is required to meet international emission targets. The decisions that are required not only need to consider the many options available but also their consequences. Along with politicians, policy developers and industry, the general public also need to be active participants in deciding which energy options, and their subsequent consequences, are acceptable for implementation at the national level. Access to balanced and factual information is essential in establishing informed opinions on the many policy options available. Past research has used several methods to measure public perceptions and opinions yet for complex issues, such as emission reduction, some of these methods have shown to be problematic. For example, semi structured interviews can provide data that is flexible and context rich yet is does also come with the limitations such as it seldom provides a practical assessment that can be utilised from researcher to researcher, across disciplines and public participation techniques. Surveys on the other hand usually address these limitations but surveys that do not encourage comparison of information or ask participants to

A Novel Four-Dimensional Energy-Saving and Emission-Reduction System and Its Linear Feedback Control

Directory of Open Access Journals (Sweden)

Minggang Wang

2012-01-01

Full Text Available This paper reports a new four-dimensional energy-saving and emission-reduction chaotic system. The system is obtained in accordance with the complicated relationship between energy saving and emission reduction, carbon emission, economic growth, and new energy development. The dynamics behavior of the system will be analyzed by means of Lyapunov exponents and equilibrium points. Linear feedback control methods are used to suppress chaos to unstable equilibrium. Numerical simulations are presented to show these results.

Evaluation of measures for greenhouse gas emissions reduction in energy supply sector

International Nuclear Information System (INIS)

Khristov, Kh.; Todorova, S.; Vasilev, Kh.; Simeonova, K.

1996-01-01

This study performed by the Energoproekt Company, Sofia (BG) is aimed at estimating the economic costs of CO 2 emissions reduction in the electricity supply system for the period 2000-2020. The specific capital investment and cost price of the following technical options have been compared: reduction of electricity and heat loss; gas and steam cycle power plants; micro hydro potential; renewable sources; extension of nuclear power installations; gas steam turbine equipment; combined cycle power plants. The evaluation is made according to requirements of a baseline scenario - to develop an import-independent energy supply policy and an economic growth without sharp structural changes. A 25-year-operation of a hypothetical energy supply system is modelled by the ENPEP code (ANL, US). The three least-cost options identified are: power loss reduction; gas and steam cycle PPs and hydroelectric objects. An optimal combination of measures, so called ' aggregated scenario' is proposed. It would allow for CO 2 reduction by 23,7 mill tons and prime cost reduction by $19,83 per ton reduced emissions. 3 refs., 2 tabs

Effects of emission reductions from the smelters in Sudbury on recovery of lakes within the metal deposition zone

Energy Technology Data Exchange (ETDEWEB)

Keller, W.; Heneberry, J.; Clark, M.; Malette, M.; Gunn, J. [Laurentian Univ., Sudbury, ON (Canada) Dept. of Biology

1999-07-01

Recent trends are examined in the chemistry of Sudbury lakes for evidence of further chemical recovery, as well as some of the biological characteristics of recovering Sudbury lakes. Preliminary results are provided from studies investigating physical, chemical and biological factors that may influence the lake recovery process with a focus on the lakes close to Sudbury that were historically the most severely affected. Smelter emission reductions in the Sudbury area have led to substantial changes in the water quality of area lakes, and decreases in acidity, sulfate, and copper and nickel concentrations followed the substantial decreases in emissions during the 1970s and similar trends are continuing after the implementation of large additional smelter emission reductions in the 1990s. Some of the most highly affected lakes close to the Sudbury smelters have showed very dramatic reductions in acidity and metal concentrations during the 1990s. Evaluation of the direct effects of the recent emissions reductions is confounded by the potential continuing effects of previous emission reductions and the effects of weather variations on chemistry time trends in Sudbury lakes. Continued monitoring of Sudbury lakes is essential to evaluate the ultimate effect of emission reduction programs, to develop an understanding of the recovery process, and to determine the need for any additional emission reduction requirements. 38 refs., 7 figs.

Economic analysis of the reduction of dehydrator emissions in the natural gas industry

International Nuclear Information System (INIS)

Chalifoux, C.

1999-01-01

Under the Canadian Environmental Protection Act benzene has been designated as toxic, and after gasoline combustion, the natural gas extraction industry is the largest source of benzene emissions to the environment. The study's objective is to present a profile of the natural gas industry and to analyze the costs to the private sector of complying with the various benzene reduction targets. Also outlined is a profile of the natural gas extraction industry. A description is included of the method used to extrapolate the results obtained from the sample of 370 sites to the industry as a whole. Two scenarios studied are described in section four including: (1) scenario one in which the environmental requirements would have to be applied across-the-board to all emitting sites, which would have to comply with maximum benzene reductions, and (2) scenario two in which the environmental requirements would only be applied to high-emission sites, which would have to comply with specific requirements. A compilation is made in the fifth section for each scenario of the cost to the industry and the benzene emission reductions for each scenario for the sample of 370 sites to the industry as a whole. The aim of developing the two scenarios used to analyze various benzene emissions reduction levels at the sample of 370 sites was to determine: capital costs required, additional annual costs as additional annual operating costs plus annualized capital costs, number of sites affected, and total benzene reductions expressed in tonnes per year. 10 tabs

Potential for the reduction of greenhouse gas emissions through the use of mobility services

DEFF Research Database (Denmark)

Grischkat, Sylvie; Hunecke, Marcel; Böhler, Susanne

2014-01-01

gas emissions per person and year was found to be 78 kg in an optimistic scenario and 25 kg in a pessimistic scenario. Extrapolated to the German metropolitan population, behaviour-related measures alone could result in a 1.8 million ton (optimistic scenario) or 0.6 million ton (pessimistic scenario......This study evaluates potential for the reduction of greenhouse gas emissions in the passenger transport sector achievable through the use of mobility services. Beside car-sharing and -pooling, six services targeted at improving and encouraging the use of urban public transportation were considered......) reduction of greenhouse gas emissions, respectively. In order to exploit this potential fully, however, target group specific information should be obtained and communication strategies developed, as addressed in this paper. This study further presents the limitation of reduction potential quantification...

EMISSION REDUCTION TECHNOLOGIES FOR MARINE DIESEL ENGINES: A SYSTEM DYNAMICS APPROACH

OpenAIRE

Pamık, Murat; Nuran, Mustafa; Cerit, A.Güldem

2015-01-01

International Maritime Organization (IMO) adopts international marine safety regulations. The regulations incorporated under Annex VI of IMO's International Convention for the Prevention of Pollution from Ships (MARPOL) entered into force in May 2005. These regulations define the limits for sulphur oxides (SOx) and nitrogen oxides (NOx) emissions from ship exhausts.In this context, emission reduction technologies needed for enviroment protection and satisfy to sustainabletransportation. ...

Current algebra; Algebre des courants

Energy Technology Data Exchange (ETDEWEB)

Jacob, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-07-01

The first three chapters of these lecture notes are devoted to generalities concerning current algebra. The weak currents are defined, and their main properties given (V-A hypothesis, conserved vector current, selection rules, partially conserved axial current,...). The SU (3) x SU (3) algebra of Gell-Mann is introduced, and the general properties of the non-leptonic weak Hamiltonian are discussed. Chapters 4 to 9 are devoted to some important applications of the algebra. First one proves the Adler- Weisberger formula, in two different ways, by either the infinite momentum frame, or the near-by singularities method. In the others chapters, the latter method is the only one used. The following topics are successively dealt with: semi leptonic decays of K mesons and hyperons, Kroll- Ruderman theorem, non leptonic decays of K mesons and hyperons ( {delta}I = 1/2 rule), low energy theorems concerning processes with emission (or absorption) of a pion or a photon, super-convergence sum rules, and finally, neutrino reactions. (author) [French] La premiere partie de ce cours (trois premiers chapitres), traite des generalites concernant l'algebre de courants. Apres une definition rapide des courants faibles et un rappel de leurs proprietes (hypothese V-A, conservation du courant vecteur, regles de selection, courant axial partiellement conserve,...), l'on introduit l'algebre de Gell-Mann SU (3) x SU (3), et discute les proprietes generales de l'Hamiltonien faible non leptonique. Les chapitres IV a IX sont consacres a des applications importantes de l'algebre des courants. En premier lieu l'on demontre la formule de Adler et Weisberger, par deux methodes differentes, celle dite du repere de moment infini et celle des singularites proches. Cette derniere est seule utilisee dans la suite. Puis, l'on traite successivement les problemes suivants: desintegrations semi-leptoniques des mesons K et des hyperons, theoreme de Kroll-Ruderman, desintegrations non leptoniques des mesons

Carbon emissions from Southeast Asian peatlands will increase despite emission-reduction schemes.

Science.gov (United States)

Wijedasa, Lahiru S; Sloan, Sean; Page, Susan E; Clements, Gopalasamy R; Lupascu, Massimo; Evans, Theodore A

2018-06-01

Carbon emissions from drained peatlands converted to agriculture in Southeast Asia (i.e. Peninsular Malaysia, Sumatra and Borneo) are globally significant and increasing. Here, we map the growth of Southeast Asian peatland agriculture and estimate CO 2 emissions due to peat drainage in relation to official land-use plans with a focus on the Reducing Emissions from Deforestation and Degradation (REDD+) related Indonesian moratorium on granting new concession licenses for industrial agriculture and logging. We find that, prior to 2010, 35% of Southeast Asian peatlands had been converted to agriculture, principally by smallholder farmers (15% of original peat extent) and industrial oil palm plantations (14%). These conversions resulted in 1.46-6.43 GtCO 2 of emissions between 1990 and 2010. This legacy of historical clearances on deep peat areas will contribute 51% (4.43-11.45 GtCO 2 ) of projected peatland CO 2 emissions over the period 2010-2130. In Indonesia, which hosts most of the region's peatland and where concession maps are publicly available, 70% of peatland conversion to agriculture occurred outside of known concessions for industrial plantation development, with smallholders accounting for 60% and industrial oil palm accounting for 34%. Of the remaining Indonesian peatswamp forest (PSF), 45% is not protected, and its conversion would amount to CO 2 emissions equivalent to 0.7-2.3% (5.14-14.93 Gt) of global fossil fuel and cement emissions released between 1990-2010. Of the peatland extent included in the moratorium, 48% was no longer forested, and of the PSF included 40-48% is likely to be affected by drainage impacts from agricultural areas and will emit CO 2 over time. We suggest that recent legislation and policy in Indonesia could provide a means of meaningful emission reductions if focused on revised land-use planning, PSF conservation both inside and outside agricultural concessions, and the development of agricultural practices based on

Impact of biogenic emission uncertainties on the simulated response of ozone and fine particulate matter to anthropogenic emission reductions.

Science.gov (United States)

Hogrefe, Christian; Isukapalli, Sastry S; Tang, Xiaogang; Georgopoulos, Panos G; He, Shan; Zalewsky, Eric E; Hao, Winston; Ku, Jia-Yeong; Key, Tonalee; Sistla, Gopal

2011-01-01

The role of emissions of volatile organic compounds and nitric oxide from biogenic sources is becoming increasingly important in regulatory air quality modeling as levels of anthropogenic emissions continue to decrease and stricter health-based air quality standards are being adopted. However, considerable uncertainties still exist in the current estimation methodologies for biogenic emissions. The impact of these uncertainties on ozone and fine particulate matter (PM2.5) levels for the eastern United States was studied, focusing on biogenic emissions estimates from two commonly used biogenic emission models, the Model of Emissions of Gases and Aerosols from Nature (MEGAN) and the Biogenic Emissions Inventory System (BEIS). Photochemical grid modeling simulations were performed for two scenarios: one reflecting present day conditions and the other reflecting a hypothetical future year with reductions in emissions of anthropogenic oxides of nitrogen (NOx). For ozone, the use of MEGAN emissions resulted in a higher ozone response to hypothetical anthropogenic NOx emission reductions compared with BEIS. Applying the current U.S. Environmental Protection Agency guidance on regulatory air quality modeling in conjunction with typical maximum ozone concentrations, the differences in estimated future year ozone design values (DVF) stemming from differences in biogenic emissions estimates were on the order of 4 parts per billion (ppb), corresponding to approximately 5% of the daily maximum 8-hr ozone National Ambient Air Quality Standard (NAAQS) of 75 ppb. For PM2.5, the differences were 0.1-0.25 microg/m3 in the summer total organic mass component of DVFs, corresponding to approximately 1-2% of the value of the annual PM2.5 NAAQS of 15 microg/m3. Spatial variations in the ozone and PM2.5 differences also reveal that the impacts of different biogenic emission estimates on ozone and PM2.5 levels are dependent on ambient levels of anthropogenic emissions.

Energy market reform and greenhouse gas emission reductions

International Nuclear Information System (INIS)

Anon.

1999-01-01

The report reviews micro-economic reform in the energy market and measures the impact that energy market reform is expected to have on greenhouse gas outcomes. It indicates that reform in the electricity and gas industries is delivering what was promised, an efficient market with lower energy prices and, over the longer term, will deliver a gradually reducing rate of greenhouse gas emissions per unit of energy produced. It also recognises that energy market reform has removed some barriers to the entry of less greenhouse gas intense fuels. These trends will result in reduced greenhouse gas intensity in the supply of energy and significant reductions in the growth in greenhouse gas emissions compared to what may have been expected without the reforms

Uncertain Emission Reductions from Forest Conservation: REDD in the Bale Mountains, Ethiopia

Directory of Open Access Journals (Sweden)

Charlene Watson

2013-09-01

Full Text Available The environmental integrity of a mechanism rewarding Reduced Emissions from Deforestation and Degradation (REDD depends on appropriate accounting for emission reductions. Largely stemming from a lack of forest data in developing countries, emission reductions accounting contains substantial uncertainty as a result of forest carbon stock estimates, where the application of biome-averaged data over large forest areas is commonplace. Using a case study in the Bale Mountains in Ethiopia, we exemplify the implications of primary and secondary forest carbon stock estimates on predicted REDD project emission reductions and revenues. Primary data estimate area-weighted mean forest carbon stock of 195 tC/ha ± 81, and biome-averaged data reported by the Intergovernmental Panel on Climate Change underestimate forest carbon stock in the Bale Mountains by as much as 63% in moist forest and 58% in dry forest. Combining forest carbon stock estimates and uncertainty in voluntary carbon market prices demonstrates the financial impact of uncertainty: potential revenues over the 20-year project ranged between US$9 million and US$185 million. Estimated revenues will influence decisions to implement a project or not and may have profound implications for the level of benefit sharing that can be supported. Strong financial incentives exist to improve forest carbon stock estimates in tropical forests, as well as the environmental integrity of REDD projects.

[Awareness of health co-benefits of carbon emissions reduction in urban residents in Beijing: a cross-sectional survey].

Science.gov (United States)

Gao, J H; Zhang, Y; Wang, J; Chen, H J; Zhang, G B; Liu, X B; Wu, H X; Li, J; Li, J; Liu, Q Y

2017-05-10

Objective: To understand the awareness of the health co-benefits of carbon emission reduction in urban residents in Beijing and the influencing factors, and provide information for policy decision on carbon emission reduction and health education campaigns. Methods: Four communities were selected randomly from Fangshan, Haidian, Huairou and Dongcheng districts of Beijing, respectively. The sample size was estimated by using Kish-Leslie formula for descriptive analysis. 90 participants were recruited from each community. χ (2) test was conducted to examine the associations between socio-demographic variables and individuals' awareness of the health co-benefits of carbon emission reduction. Ordinal logistic regression analysis was performed to investigate the factors influencing the awareness about the health co-benefits. Results: In 369 participants surveyed, 12.7 % reported they knew the health co-benefits of carbon emission reduction. The final logistic regression analysis revealed that age ( OR =0.98), attitude to climate warming ( OR =0.72) and air pollution ( OR =1.59), family monthly average income ( OR =1.27), and low carbon lifestyle ( OR =2.36) were important factors influencing their awareness of the health co-benefits of carbon emission reduction. Conclusion: The awareness of the health co-benefits of carbon emissions reduction were influenced by people' socio-demographic characteristics (age and family income), concerns about air pollution and climate warming, and low carbon lifestyle. It is necessary to take these factors into consideration in future development and implementation of carbon emission reduction policies and related health education campaigns.

Reduction of greenhouse gas in power industry by emission trading system

Energy Technology Data Exchange (ETDEWEB)

Lee, Eun Myung; Lee, Kee Hoon [Korea Energy Economics Institute, Euiwang (Korea)

1999-04-01

The rules governing their implementation and operation for implementing the Kyoto Protocol including emissions permit trading, project-based credit trading and the Clean Development Mechanism are to be decided at future talks. How these policies are eventually designed will determine the effectiveness of the Protocol. However, it has been passive and insufficient to deal with the Kyoto Protocol since there is no obligation on reduction of greenhouse gas emissions. Therefore, the issues on emissions permit trading are analyzed and the strategies for utilizing the Kyoto mechanism effectively are presented through reviewing the existing negotiation strategies. Moreover, how to use emissions permit trading in the power industry, the largest greenhouse gas emissions industry, is examined by dividing into two sections, domestic and abroad. (author). 62 refs., 2 figs., 42 tabs.

Constructing carbon offsets: The obstacles to quantifying emission reductions

International Nuclear Information System (INIS)

Millard-Ball, Adam; Ortolano, Leonard

2010-01-01

The existing literature generally ascribes the virtual absence of the transport sector from the Clean Development Mechanism (CDM) to the inherent complexity of quantifying emission reductions from mobile sources. We use archival analysis and interviews with CDM decision-makers and experts to identify two additional groups of explanations. First, we show the significance of aspects of the CDM's historical evolution, such as the order in which methodologies were considered and the assignment of expert desk reviewers. Second, we highlight inconsistencies in the treatment of uncertainty across sectors. In contrast to transport methodologies, other sectors are characterized by a narrow focus on sources of measurement uncertainty and a neglect of economic effects ('market leakages'). We do not argue that the rejection of transport methodologies was unjustified, but rather than many of the same problems are inherent in other sectors. Thus, the case of transport sheds light on fundamental problems in quantifying emission reductions under the CDM. We argue that a key theoretical attraction of the CDM-equalization of marginal abatement costs across all sectors-has been difficult to achieve in practice.

Reduction potentials of energy demand and GHG emissions in China's road transport sector

International Nuclear Information System (INIS)

Yan Xiaoyu; Crookes, Roy J.

2009-01-01

Rapid growth of road vehicles, private vehicles in particular, has resulted in continuing growth in China's oil demand and imports, which has been widely accepted as a major factor effecting future oil availability and prices, and a major contributor to China's GHG emission increase. This paper is intended to analyze the future trends of energy demand and GHG emissions in China's road transport sector and to assess the effectiveness of possible reduction measures. A detailed model has been developed to derive a reliable historical trend of energy demand and GHG emissions in China's road transport sector between 2000 and 2005 and to project future trends. Two scenarios have been designed to describe the future strategies relating to the development of China's road transport sector. The 'Business as Usual' scenario is used as a baseline reference scenario, in which the government is assumed to do nothing to influence the long-term trends of road transport energy demand. The 'Best Case' scenario is considered to be the most optimized case where a series of available reduction measures such as private vehicle control, fuel economy regulation, promoting diesel and gas vehicles, fuel tax and biofuel promotion, are assumed to be implemented. Energy demand and GHG emissions in China's road transport sector up to 2030 are estimated in these two scenarios. The total reduction potentials in the 'Best Case' scenario and the relative reduction potentials of each measure have been estimated

Device with Complex System for Heat Utilization and Reduction of Hazardous Air Emissions

Directory of Open Access Journals (Sweden)

O. V. Kascheeva

2012-01-01

Full Text Available Investigations concern heat utilization and reduction of hazardous emissions occurring in residential buildings and accompanying operation of a great number of industrial enterprises in particular heat and power objects, and firstly, heat-generating units of small power located in densely populated residential areas without centralized heat supply.The investigation target is to reduce cost of heat produced by independent system of building heat supply, reduction of air pollution  due to hazardous gas emissions and reduction of heat pollution of the environment as a result of building ventilation system operation, ventilation of their internal and external sewerage network and higher reliability of their operation.The target is achieved because the device with complex system for heat utilization and reduction of hazardous air emissions has additionally an assembly tank for mixing flue gases, ventilation emissions and atmospheric air, heat pump. Evaporation zone of the pump is a condensator of the gas mixture and its condensate zone contains a heat supply line for a heat consumer. The line is equipped with assembling  and distributing collectors, pipeline connecting the heat supply line with the system of direct and return delivery water from a boiler house, a separator for division of liquid and gaseous mixture phases, neutralizing devices for separate reduction of concentrations of hazardous and odorous substances being released in gaseous and liquid portions of the mixture, a pipeline for periodic supply of air with higher concentration of hazardous and odorous substances in the boiler furnace. The supplied air is obtained as a result of its passing through gas filters at their regeneration when their exchange capacity is exhausted.

A manufacturer`s proposal for the reduction of polluting emissions from turbines with a power lower than 10 MW; Turbines. Proposition d`un constructeur pour reduire les emissions polluantes des turbines de moins de 10 MW

Energy Technology Data Exchange (ETDEWEB)

Grienche, G. [Turbomeca, 64 - Bordes (France)

1997-12-31

This paper is a series of transparencies dealing with the industrial turbines manufactured by Turbomeca company and with the way to reduce the pollutant emissions in agreement with the French regulation on combustion and environment. After a recall of the functioning conditions and the performances requested in turbines combustion chamber, the paper analyzes the different existing solutions used for the reduction of pollutants emissions (water injection, weak, rich and dry low NOx combustion, catalytic combustion) and their cost/performance ratio. Then Turbomeca`s applied research on combustion chambers is described (conventional chambers with water injection, specific low emission chamber of Eurodyn turbines and adaptable to other existing engines, 2D numerical simulation of combustion kinetics, low pre-mixed combustion chambers, catalytic combustion chambers). (J.S.)

Temporal and Spatial Variations in Provincial CO2 Emissions in China from 2005 to 2015 and Assessment of a Reduction Plan

Directory of Open Access Journals (Sweden)

Xuankai Deng

2015-05-01

Full Text Available This study calculated the provincial carbon dioxide (CO2 emissions in China, analyzed the temporal and spatial variations in emissions, and determined the emission intensity from 2005 to 2015. The total emissions control was forecasted in 2015, and the reduction pressure of the 30 provinces in China was assessed based on historical emissions and the 12th five-year (2011–2015 reduction plan. Results indicate that CO2 emissions eventually increased and gradually decreased from east to west, whereas the emission intensity ultimately decreased and gradually increased from south to north. By the end of 2015, the total control of provincial emissions will increase significantly compared to the 2010 level, whereas the emission intensity will decrease. The provinces in the North, East, and South Coast regions will maintain the highest emission levels. The provinces in the Southwest and Northwest regions will experience a rapid growth rate of emissions. However, the national emission reduction target will nearly be achieved if all provinces can implement reduction targets as planned. Pressure indices show that the South Coast and Northwest regions are confronted with a greater reduction pressure of emission intensity. Finally, policy implications are provided for CO2 reductions in China.

Analysis on energy saving and emission reduction of clean energy technology in ports

Science.gov (United States)

Zhu, Li; Qin, Cuihong; Peng, Chuansheng

2018-02-01

This paper discusses the application of clean energy technology in ports. Using Ningbo port Co. Ltd. Beilun second container terminal branch as an example, we analyze the effect of energy saving and emission reduction of CO2 and SO2 by clean energy alternative to fuel oil, and conclude that the application of clean energy technology in the container terminal is mature, and can achieve effect of energy-saving and emission reduction of CO2 and SO2. This paper can provide as a reference for the promotion and application of clean energy in ports.

MEASUREMENTS OF ABSORPTION, EMISSIVITY REDUCTION, AND LOCAL SUPPRESSION OF SOLAR ACOUSTIC WAVES IN SUNSPOTS

International Nuclear Information System (INIS)

Chou, D.-Y.; Liang, Z.-C.; Yang, M.-H.; Zhao Hui; Sun, M.-T.

2009-01-01

The power of solar acoustic waves in magnetic regions is lower relative to the quiet Sun. Absorption, emissivity reduction, and local suppression of acoustic waves contribute to the observed power reduction in magnetic regions. We propose a model for the energy budget of acoustic waves propagating through a sunspot in terms of the coefficients of absorption, emissivity reduction, and local suppression of the sunspot. Using the property that the waves emitted along the wave path between two points have no correlation with the signal at the starting point, we can separate the effects of these three mechanisms. Applying this method to helioseismic data filtered with direction and phase-velocity filters, we measure the fraction of the contribution of each mechanism to the power deficit in the umbra of the leading sunspot of NOAA 9057. The contribution from absorption is 23.3 ± 1.3%, emissivity reduction 8.2 ± 1.4%, and local suppression 68.5 ± 1.5%, for a wave packet corresponding to a phase velocity of 6.98 x 10 -5 rad s -1 .

The power sector in China and India: greenhouse gas emissions reduction potential and scenarios for 1990-2020

International Nuclear Information System (INIS)

Kroeze, Carolien; Vlasblom, Jaklien; Gupta, Joyeeta; Boudri, Christiaan; Blok, Kornelis

2004-01-01

Emissions of greenhouse gases from China and India are expected to increase in the coming two decades. The objectives of this study are two-fold: (1) to quantify the technical potential of various options to reduce emissions of greenhouse gases from the electricity sector in China and India in the year 2020, and (2) to evaluate a business-as-usual (BAU) scenario plus a number of best practice technology (BPT) scenarios for emission reduction of greenhouse gases from electricity production in China and India up to the year 2020. Options to reduce emissions include end use efficiency improvement, fuel switches, and efficiency improvement of existing and new power plants. For China, we calculated that the individual options analysed have technical potentials to reduce 2020 emissions ranging from 1% to 43% (relative to 2020 unabated emissions) and for India from 4% to 45%. Relatively large reduction potentials are calculated for end use efficiency improvement (43% for China and 45% for India), replacement of coal by renewable energy (23% for China and 14% for India) and natural gas (11% for China and 14% for India). Reducing electricity losses during transmission and distribution would reduce emissions by 7% (China) and 6% (India) and electrical efficiency improvement of power plants by 9% in both countries. The reduction options differ with respect to their feasibility. In the BAU scenario, emissions increase considerably between 1990 and 2020. Next, we present results for three BPT scenarios, which reflect the combined technical potential of selected options to reduce emissions. Our calculations indicate that all three scenarios have a potential to reduce emissions to about half the 2020 BAU level. The three scenarios are very different in their assumptions on reduction options, indicating that there are different strategies possible for realising relatively large emission reductions in China and India. We conclude that end use efficiency improvement may be one of

A mathematical/physics carbon emission reduction strategy for building supply chain network based on carbon tax policy

Directory of Open Access Journals (Sweden)

Li Xueying

2017-03-01

Full Text Available Under the background of a low carbon economy, this paper examines the impact of carbon tax policy on supply chain network emission reduction. The integer linear programming method is used to establish a supply chain network emission reduction such a model considers the cost of CO2 emissions, and analyses the impact of different carbon price on cost and carbon emissions in supply chains. The results show that the implementation of a carbon tax policy can reduce CO2 emissions in building supply chain, but the increase in carbon price does not produce a reduction effect, and may bring financial burden to the enterprise. This paper presents a reasonable carbon price range and provides decision makers with strategies towards realizing a low carbon building supply chain in an economical manner.

A probabilistic production costing analysis of SO2 emissions reduction strategies for Ohio: emissions, costs and employment tradeoffs

International Nuclear Information System (INIS)

Heslin, J.S.; Hobbs, B.F.

1991-01-01

A new approach for state- and utility-level analysis of the cost and regional economic impacts of strategies for reducing utility SO 2 emissions is summarized and applied to Ohio. The methodology is based upon probabilistic production costing and economic input-output analysis. It is an improvement over previous approaches because it: (1) accurately models random outages of generating units, 'must-run' constraints on unit output, and the distribution of power demands; and (2) runs quickly on a microcomputer and yet considers the entire range of potential control strategies from a systems perspective. The input-output analysis considers not only the economic effects of utility fuel use and capital investment, but also those of increased electric rates. Two distinct strategies are found to be most attractive for Ohio. The first, more flexible one, consists of emissions dispatching (ED) alone to meet short run emissions reduction targets. A 75 percent reduction can then be achieved by the turn of the century by combining ED and fuel switching (FS) with flue gas desulfurization, limestone injection multistage burners, and physical coal cleaning at selected plants. The second is a scrubber-based strategy which includes ED. By the year 2000, energy conservation becomes a cost effective component of these strategies. In order to minimize compliance costs, acid rain legislation which facilitates emission trading and places regional tonnage limits on emissions is desirable

Greenhouse gas emission reduction scenarios for BC : meeting the twin objectives of temperature stabilization and global equity

International Nuclear Information System (INIS)

Campbell, C.R.

2008-08-01

Greenhouse gas (GHG) emissions reduction strategies are needed in order to prevent rises in global temperatures. This report presented 6 GHG emission scenarios conducted to understand the kind of contribution that the province of British Columbia (BC) might make towards reducing global warming in the future. Short, medium, and longer term GHG reduction targets were benchmarked. The University of Victoria earth system climate model was used to calculate emission pathways where global average temperature did not exceed 2 degrees C above pre-industrial values, and where atmospheric GHGs were stabilized at 400 ppm of carbon dioxide equivalent (CO 2 e). Global carbon emission budgets of the total amount of GHG emissions permissible between now and 2100 were identified. A carbon emission budget for 2008 to 2100 was then developed based on the population of BC. Average annual emission reduction rates for the world and for BC were also identified. It was concluded that dramatically reduced emissions will be insufficient to achieve an equilibrium temperature less than 2 degrees C above pre-industrial levels. Global reductions of greater than 80 per cent are needed to prevent unacceptable levels of ocean acidification. Results suggested that carbon sequestration technologies may need to be used to remove CO 2 from the atmosphere by artificial means. 38 refs., 5 tabs., 4 figs

An analysis of energy strategies for CO2 emission reduction in China. Case studies by MARKAL model

International Nuclear Information System (INIS)

Li Guangya

1994-12-01

The China's energy system has been analyzed by using the MARKAL model in this study and the time period is from the year 1990 to 2050. The MARKAL model is applied here to evaluate the cost effective energy strategies for CO 2 emission reduction in China. Firstly the Reference Energy System (RES) of China and its database were established, and the useful energy demand was projected on the basis of China's economic target and demographic forecasting. Four scenarios, BASE1-BASE4 were defined with different assumptions of crude oil and natural uranium availability. Analytical results show that without CO 2 emission constrains coal consumption will continue to hold a dominant position in primary energy supply, and CO 2 emissions in 2050 will be 9.55 BtCO 2 and 10.28 BtCO 2 with different natural uranium availability. Under the CO 2 emission constraints, nuclear and renewable energy will play important roles in CO 2 emission reduction, and feasible maximum CO 2 emission reduction estimated by this study is 3.16 BtCO 2 in 2050. The cumulative CO 2 emission from 1990 to 2050 will be 418.25 BtCO 2 and 429.16 BtCO 2 with different natural uranium availability. Total feasible maximum CO 2 emission reduction from 1990 to 2050 is 95.97 BtCO 2 . (author)

Undertaking high impact strategies: The role of national efficiency measures in long-term energy and emission reduction in steel making

International Nuclear Information System (INIS)

Xu, Tengfang; Karali, Nihan; Sathaye, Jayant

2014-01-01

Highlights: • Evaluate long-term effects of national energy efficiency in steel making. • Use bottom-up optimization for projection in China, India and the U.S. • The effects include changes in steel production, energy use, emissions, and costs. • Three emission targets induce different structural changes and investments. • Projected energy and CO 2 intensity declines in each country from 2010 to 2050. - Abstract: In this paper, we applied bottom-up linear optimization modeling to analyze long-term national impacts of implementing energy efficiency measures on energy savings, CO 2 -emission reduction, production, and costs of steel making in China, India, and the U.S. We first established two base scenarios representing business-as-usual steel production for each country from 2010 to 2050; Base scenario (in which no efficiency measure is available) and Base-E scenario (in which efficiency measures are available), and model scenarios representing various emission-reduction targets that affects production, annual energy use and costs with the goal of cost minimization. A higher emission-reduction target generally induces larger structural changes and increased investments in nation-wide efficiency measures, in addition to autonomous improvement expected in the Base scenario. Given the same emission-reduction target compared to the base scenario, intensity of annual energy use and emissions exhibits declining trends in each country from year 2010 to 2050. While a higher emission-reduction target result in more energy reduction from the base scenario, such reduction can become more expensive to achieve. The results advance our understanding of long-term effects of national energy efficiency applications under different sets of emission-reduction targets for steel sectors in the three major economies, and provide useful implications for high impact strategies to manage production structures, production costs, energy use, and emission reduction in steel making

Electricity generation: options for reduction in carbon emissions.

Science.gov (United States)

Whittington, H W

2002-08-15

Historically, the bulk production of electricity has been achieved by burning fossil fuels, with unavoidable gaseous emissions, including large quantities of carbon dioxide: an average-sized modern coal-burning power station is responsible for more than 10 Mt of CO(2) each year. This paper details typical emissions from present-day power stations and discusses the options for their reduction. Acknowledging that the cuts achieved in the past decade in the UK CO(2) emissions have been achieved largely by fuel switching, the remaining possibilities offered by this method are discussed. Switching to less-polluting fossil fuels will achieve some measure of reduction, but the basic problem of CO(2) emissions continues. Of the alternatives to fossil fuels, only nuclear power represents a zero-carbon large-scale energy source. Unfortunately, public concerns over safety and radioactive waste have still to be assuaged. Other approaches include the application of improved combustion technology, the removal of harmful gases from power-station flues and the use of waste heat to improve overall power-station efficiency. These all have a part to play, but many consider our best hope for emissions reduction to be the use of renewable energy. The main renewable energy contenders are assessed in this paper and realistic estimates of the contribution that each could provide are indicated. It appears that, in the time-scale envisaged by planners for reduction in CO(2) emission, in many countries renewable energy will be unlikely to deliver. At the same time, it is worth commenting that, again in many countries, the level of penetration of renewable energy will fall short of the present somewhat optimistic targets. Of renewable options, wind energy could be used in the short to medium term to cover for thermal plant closures, but for wind energy to be successful, the network will have to be modified to cope with wind's intermittent nature. Globally, hydroelectricity is currently the

Energy and environmental implications of carbon emission reduction targets: Case of Kathmandu Valley, Nepal

International Nuclear Information System (INIS)

Shrestha, Ram M.; Rajbhandari, Salony

2010-01-01

This paper analyzes the sectoral energy consumption pattern and emissions of CO 2 and local air pollutants in the Kathmandu Valley, Nepal. It also discusses the evolution of energy service demands, structure of energy supply system and emissions from various sectors under the base case scenario during 2005-2050. A long term energy system planning model of the Kathmandu Valley based on the MARKet ALlocation (MARKAL) framework is used for the analyses. Furthermore, the paper analyzes the least cost options to achieve CO 2 emission reduction targets of 10%, 20% and 30% below the cumulative emission level in the base case and also discusses their implications for total cost, technology-mix, energy-mix and local pollutant emissions. The paper shows that a major switch in energy use pattern from oil and gas to electricity would be needed in the Valley to achieve the cumulative CO 2 emission reduction target of 30% (ER30). Further, the share of electricity in the cumulative energy consumption of the transport sector would increase from 12% in the base case to 24% in the ER30 case.

Fundamental research on sintering technology with super deep bed achieving energy saving and reduction of emissions

International Nuclear Information System (INIS)

Hongliang Han; Shengli Wu; Gensheng Feng; Luowen Ma; Weizhong Jiang

2012-01-01

In the general frame of energy saving, environment protection and the concept of circular economy, the fundamental research on the sintering technology with super deep bed, achieving energy saving and emission reduction, was carried out. At first, the characteristics of the process and exhaust emission in the sintering with super deep bed was mastered through the study of the influence of different bed depths on the sintering process. Then, considering the bed permeability and the fuel combustion, their influence on the sinter yield and quality, their potential for energy saving and emission reduction was studied. The results show that the improvement of the bed permeability and of the fuel combustibility respectively and simultaneously, leads to an improvement of the sintering technical indices, to energy saving and emission reduction in the condition of super deep bed. At 1000 mm bed depth, and taking the appropriate countermeasure, it is possible to decrease the solid fuel consumption and the emission of CO 2 , SO 2 , NO x by 10.08%, 11.20%, 22.62% and 25.86% respectively; and at 700 mm bed depth, it is possible to reduce the solid fuel consumption and the emission of CO 2 , SO 2 , NO x by 20.71%, 22.01%, 58.86% and 13.13% respectively. This research provides the theoretical and technical basis for the new technology of sintering with super deep bed, achieving energy saving and reduction of emission. (authors)

Treatment and storage of contaminated materials; Traitement et stockage des materiels contamines

Energy Technology Data Exchange (ETDEWEB)

Cerre, P; Pomarola, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1959-07-01

The ultimate disposal of radioactive wastes sets an important problem which has been partly solved. France has temporarily adopted the following method: 1) Volume reduction, 2) Fixation of the activity in non leakable solids standing all temporarily or ultimate kinds of storing. According to those two basic principles the authors have presented: - a decontamination plant allowing maximum recovery of materials, - the plans of an installation devised for carrying out radioactive waste volume reduction and conditioning. Both of them are being built at Saclay. (author) [French] La destination finale des residus radioactifs pose un probleme imparfaitement resolu. La France a adopte, comme solution d'attente, le processus ci-dessous: 1) Reduction des volumes, 2) Confinement de l'activite dans des solides non lechables et pouvant resister a tous modes de stockage provisoire ou definitif. A partir des idees directrices, MM. CERRE et POMAROLA ont presente: - un batiment de decontamination permettant de recuperer le maximum de materiaux, - un projet d'installation visant a la reduction du volume des dechets radioactifs et leur conditionnement. Ces deux installations sont en cours d'execution a Saclay. (auteur)

Achieving deep reductions in US transport greenhouse gas emissions: Scenario analysis and policy implications

International Nuclear Information System (INIS)

McCollum, David; Yang, Christopher

2009-01-01

This paper investigates the potential for making deep cuts in US transportation greenhouse gas (GHG) emissions in the long-term (50-80% below 1990 levels by 2050). Scenarios are used to envision how such a significant decarbonization might be achieved through the application of advanced vehicle technologies and fuels, and various options for behavioral change. A Kaya framework that decomposes GHG emissions into the product of four major drivers is used to analyze emissions and mitigation options. In contrast to most previous studies, a relatively simple, easily adaptable modeling methodology is used which can incorporate insights from other modeling studies and organize them in a way that is easy for policymakers to understand. Also, a wider range of transportation subsectors is considered here-light- and heavy-duty vehicles, aviation, rail, marine, agriculture, off-road, and construction. This analysis investigates scenarios with multiple options (increased efficiency, lower-carbon fuels, and travel demand management) across the various subsectors and confirms the notion that there are no 'silver bullet' strategies for making deep cuts in transport GHGs. If substantial emission reductions are to be made, considerable action is needed on all fronts, and no subsectors can be ignored. Light-duty vehicles offer the greatest potential for emission reductions; however, while deep reductions in other subsectors are also possible, there are more limitations in the types of fuels and propulsion systems that can be used. In all cases travel demand management strategies are critical; deep emission cuts will not likely be possible without slowing growth in travel demand across all modes. Even though these scenarios represent only a small subset of the potential futures in which deep reductions might be achieved, they provide a sense of the magnitude of changes required in our transportation system and the need for early and aggressive action if long-term targets are to be met.

Contributing to local policy making on GHG emission reduction through inventorying and attribution: A case study of Shenyang, China

International Nuclear Information System (INIS)

Xi Fengming; Geng Yong; Chen Xudong; Zhang Yunsong; Wang Xinbei; Xue Bing; Dong Huijuan; Liu Zhu; Ren Wanxia; Fujita, Tsuyoshi; Zhu Qinghua

2011-01-01

Cities consumed 84% of commercial energy in China, which indicates cities should be the main areas for GHG emissions reduction. Our case study of Shenyang in this paper shows how a clear inventory analysis on GHG emissions at city level can help to identify the major industries and societal sectors for reduction efforts so as to facilitate low-carbon policy-making. The results showed total carbon emission in 2007 was 57 Mt CO 2 equivalents (CO 2 e), of which 41 Mt CO 2 e was in-boundary emissions and 16 Mt CO 2 e was out-of-boundary emissions. The energy sector was dominant in the emission inventory, accounting for 93.1% of total emissions. Within energy sector, emissions from energy production industry, manufacturing and construction industry accounted for 88.4% of this sector. Our analysis showed that comparing with geographical boundary, setting system boundary based on single process standard could provide better information to decision makers for carbon emission reduction. After attributing electricity and heating consumption to final users, the resident and commercial sector became the largest emitter, accounting for 28.5% of total emissions. Spatial analysis of emissions showed that industrial districts such as Shenbei and Tiexi had the large potential to reduce their carbon emissions. Implications of results are finally discussed. - Highlights: → An inventory analysis can help identify key industries and societal sectors for reduction efforts. → Setting system boundary can provide better information for carbon emission reduction. → Urban districts with heavy industrial plants have potential to reduce their carbon emissions. → Policies that support urban energy structure optimization can accelerate low-carbon development.

Impact of International Oil Price on Energy Conservation and Emission Reduction in China

Directory of Open Access Journals (Sweden)

Jian Chai

2016-05-01

Full Text Available In the context of “new normal” economy and frequent “haze”, the strategy of energy conservation and emission reduction aiming to lower costs and reduce pollution is currently still a major strategic direction in China and the world, and will remain so for some time in the future. This paper uses the annual data of West Texas Intermediate (WTI crude oil price in 1987–2014 as samples. We firstly present the direction and mechanism of the influence of oil price change on total consumption of every kind of energy by path analysis, and then consider establishing a Structural Vector Autoregression model of energy conservation and emission reduction in three statuses. Research shows that if the international oil price increases by 1%, the energy consumption per GDP and carbon dioxide emission increase by 0.092% and 0.053% respectively in the corresponding period. In the status of high energy consumption and high emission, if the international oil price increases by 1%, the energy consumption per GDP and carbon dioxide emission increase by 0.043% and 0.065% respectively in the corresponding period. In the status of low energy consumption and low emission, if the international oil price increases by 1%, the energy consumption per GDP per unit increases by 0.067% and carbon dioxide emission decreases by 0.085% in the corresponding period.

Integrated assessment of climate change with reductions of methane emissions

NARCIS (Netherlands)

Amstel, van A.R.

2005-01-01

We have been living in the anthropocene era since about 1950, and evidence of human influence on the natural ecosystems and climate is mounting. Reductions of greenhouse gas emissions are needed to reduce the effects of climate change in the future. In an integrated assessment with the IMAGE model

A supply chain optimization framework for CO2 emission reduction: Case of the Netherlands

OpenAIRE

Kalyanarengan Ravi, N.; Zondervan, E.; van Sint Annaland, M.; Fransoo, J.C.; Grievink, J.; Claus, T.; Herrmann, F.; Manitz, M.; Rose, O.

2016-01-01

A major challenge for the industrial deployment of a CO2 emission reduction methodology is to reduce the overall cost and the integration of all the nodes in the supply chain for CO2 emission reduction. In this work, we develop a mixed integer linear optimization model that selects appropriate sources, capture process, transportation network and CO2 storage sites and optimize for a minimum overall cost. Initially, we screen the sources and storage options available in the Netherlands at diffe...

MODELISATION DE LA CINETIQUE CHIMIQUE DANS LA REDUCTION DES OXYDES D4AZOTE PAR DECHARGE COURONNE.

OpenAIRE

MEDJAHDI, Sarah ines

2015-01-01

CE TRAVAIL DE recherche rentre dans le cadre général de modélisation de la réduction des oxydes d'azote . l'utilisation des réacteurs a plasma froid non-thermique généré par des décharges couronnes est actuellement l'une des techniques les puis promettre .ses pour la destruction des oxydes d'azote .en effet , le traitement des gaz pollués par les décharges couronnes est notamment rendu possible par la multiplication des décharges Électriques .

Climate change : enhanced : recent reductions in China's greenhouse gas emissions.

Energy Technology Data Exchange (ETDEWEB)

Streets, D. G.; Jiang, K.; Hu, X.; Sinton, J. E.; Zhang, X.-Q.; Xu, D.; Jacobson, M. Z.; Hansen, J. E.; Decision and Information Sciences; Energy Research Inst.; LBNL; Chinese Academy of Forestry; Stanford Univ.; NASA Goddard Inst. for Space Studies

2001-11-30

Using the most recent energy and other statistical data, we have estimated the annual trends in China's greenhouse gas emissions for the period 1990 to 2000. The authors of this Policy Forum calculate that CO2 emissions declined by 7.3% between 1996 and 2000, while CH4 emissions declined by 2.2% between 1997 and 2000. These reductions were due to a combination of energy reforms, economic restructuring, forestry policies, and economic slowdown. The effects of these emission changes on global mean temperatures are estimated and compared with the effects of concurrent changes in two aerosol species, sulfate and black carbon.

Scenarios of high greenhouse gas emission reduction in transports and buildings by 2050

International Nuclear Information System (INIS)

Teissier, O.; Meunier, L.

2008-01-01

The authors report simulations of different environmental policy measures concerning transports and buildings in France. First, they review measures which may entail a reduction of greenhouse gas emissions, and comment their emission reduction potential and their implementation costs. These measures are then ranked, and only those presenting a significant potential and an economically and technologically feasibility are finally considered. Their impact is then simulated by using different models which are adapted to the both sectors and to time ranges. The obtained results are compared to those obtained with a calibrated trend scenario and with a 'factor 4' scenario

Diagnosing the uncertainty and detectability of emission reductions for REDD + under current capabilities: an example for Panama

International Nuclear Information System (INIS)

Pelletier, Johanne; Potvin, Catherine; Ramankutty, Navin

2011-01-01

In preparation for the deployment of a new mechanism that could address as much as one fifth of global greenhouse gas emissions by reducing emissions from deforestation and forest degradation (REDD +), important work on methodological issues is still needed to secure the capacity to produce measurable, reportable, and verifiable emissions reductions from REDD + in developing countries. To contribute to this effort, we have diagnosed the main sources of uncertainty in the quantification of emission from deforestation for Panama, one of the first countries to be supported by the Forest Carbon Partnership Facility of the World Bank and by UN-REDD. Performing sensitivity analyses using a land-cover change emissions model, we identified forest carbon stocks and the quality of land-cover maps as the key parameters influencing model uncertainty. The time interval between two land-cover assessments, carbon density in fallow and secondary forest, and the accuracy of land-cover classifications also affect our ability to produce accurate estimates. Further, we used the model to compare emission reductions from five different deforestation reduction scenarios drawn from governmental input. Only the scenario simulating a reduction in deforestation by half succeeds in crossing outside the confidence bounds surrounding the baseline emission obtained from the uncertainty analysis. These results suggest that with current data, real emission reductions in developing countries could be obscured by their associated uncertainties. Ways of addressing the key sources of error are proposed, for developing countries involved in REDD + , for improving the accuracy of their estimates in the future. These new considerations confirm the importance of current efforts to establish forest monitoring systems and enhance capabilities for REDD + in developing countries.

Possibilities for the reduction of NOx emissions

International Nuclear Information System (INIS)

Marx, E.

1993-01-01

Nitrogen oxides develop mainly in the combustion of fossil fuels based on three mechanisms: process-dependent thermal NO; prompt NO as well as fuel-dependent NO. The reaction either takes places in the area of the root of the flame or with the combustion gases. A main effect on the amount of developing nitrogen oxides have the fuel, the burner design as well as the heat generator. In the last years considerable emission reductions were attained mainly by design changes of the burner, e.g. gas burners with internal circulation, burners with external exhaust gas recirculation, burners with internal recirculation. (BWI) [de

Observation of reduction of secondary electron emission from helium ion impact due to plasma-generated nanostructured tungsten fuzz

International Nuclear Information System (INIS)

Hollmann, E M; Doerner, R P; Nishijima, D; Pigarov, A Yu

2017-01-01

Growth of nanostructured fuzz on a tungsten target in a helium plasma is found to cause a significant (∼3×) reduction in ion impact secondary electron emission in a linear plasma device. The ion impact secondary electron emission is separated from the electron impact secondary electron emission by varying the target bias voltage and fitting to expected contributions from electron impact, both thermal and non-thermal; with the non-thermal electron contribution being modeled using Monte-Carlo simulations. The observed (∼3×) reduction is similar in magnitude to the (∼2×) reduction observed in previous work for the effect of tungsten fuzz formation on secondary electron emission due to electron impact. It is hypothesized that the observed reduction results from re-absorption of secondary electrons in the tungsten fuzz. (paper)

Projects to Improve Air Quality at Ports – 2014 Diesel Emissions Reduction Act (DERA) Funding Opportunity - Closed Announcement FY 2014

Science.gov (United States)

OTAQ is soliciting proposals that achieve reductions in diesel emissions produced by diesel engines and diesel emissions exposure, from fleets operating at marine and inland water ports under the Diesel Emissions Reduction Act (DERA).

Projects to Improve Air Quality at Ports – 2013 Diesel Emissions Reduction Act (DERA) Funding Opportunity - Closed Announcement FY 2014

Science.gov (United States)

OTAQ is soliciting proposals that achieve reductions in diesel emissions produced by diesel engines and diesel emissions exposure, from fleets operating at marine and inland water ports under the Diesel Emissions Reduction Act (DERA).

Collaborative Emission Reduction Model Based on Multi-Objective Optimization for Greenhouse Gases and Air Pollutants.

Science.gov (United States)

Meng, Qing-chun; Rong, Xiao-xia; Zhang, Yi-min; Wan, Xiao-le; Liu, Yuan-yuan; Wang, Yu-zhi

2016-01-01

CO2 emission influences not only global climate change but also international economic and political situations. Thus, reducing the emission of CO2, a major greenhouse gas, has become a major issue in China and around the world as regards preserving the environmental ecology. Energy consumption from coal, oil, and natural gas is primarily responsible for the production of greenhouse gases and air pollutants such as SO2 and NOX, which are the main air pollutants in China. In this study, a mathematical multi-objective optimization method was adopted to analyze the collaborative emission reduction of three kinds of gases on the basis of their common restraints in different ways of energy consumption to develop an economic, clean, and efficient scheme for energy distribution. The first part introduces the background research, the collaborative emission reduction for three kinds of gases, the multi-objective optimization, the main mathematical modeling, and the optimization method. The second part discusses the four mathematical tools utilized in this study, which include the Granger causality test to analyze the causality between air quality and pollutant emission, a function analysis to determine the quantitative relation between energy consumption and pollutant emission, a multi-objective optimization to set up the collaborative optimization model that considers energy consumption, and an optimality condition analysis for the multi-objective optimization model to design the optimal-pole algorithm and obtain an efficient collaborative reduction scheme. In the empirical analysis, the data of pollutant emission and final consumption of energies of Tianjin in 1996-2012 was employed to verify the effectiveness of the model and analyze the efficient solution and the corresponding dominant set. In the last part, several suggestions for collaborative reduction are recommended and the drawn conclusions are stated.

Environmental and economic effects of the Copenhagen pledges and more ambitious emission reduction targets. Interim report

Energy Technology Data Exchange (ETDEWEB)

Schleich, Joachim; Duscha, Vicki; Peterson, Everett B. [Fraunhofer-Institut fuer System- und Innovationsforschung, Karlsruhe (Germany); Virginia Tech, Blacksburg, VA (United States). Dept. of Agricultural and Applied Economics

2010-06-15

Global carbon dioxide emissions need to be reduced by at least 50 to 85 % in 2050 compared to 2000 levels to limit global surface temperature increase to 2 C compared to preindustrial levels (IPCC 2007). As an intermediate greenhouse gas emission reduction target for industrialized countries in 2020 the IPCC (2007) confirmed a range of 25 % to 40 % compared to 1990, together with a substantial deviation from baseline in some developing regions, which was quantified as reductions in the range of 15 % to 30 % below baseline (den Elzen and Hoehne 2008). This report explores the environmental and economic effects of the pledges submitted by industrialized and major developing countries for 2020 under the Copenhagen Accord as quantifiable emission reductions or as NAMAs. Two scenarios reflect the lower (''weak'') and upper (''ambitious'') bounds of the Copenhagen pledges leading to emission reductions of 17 % below 1990 levels for Annex I countries and 13 % below reference levels for Non-Annex I countries. Both scenarios do not reach the level of ambition indicated as necessary by science to keep temperature increase below 2 C. In addition, two scenarios in accordance with the IPCC range for reaching a 2 C target are analyzed with industrialized countries in aggregate reducing their CO{sub 2}-emissions by 30 % and by 40 % in 2020 compared to 1990 levels, respectively. For all four policy scenarios the effects of emission paths leading to a global reduction target of 50 % below 1990 levels in 2050 are also simulated for 2030. In the scenarios for 2030 all but the least developed countries are assumed to take on emission targets, but emission caps are considerably less stringent for developing countries than for developed countries. In addition, a separate scenario is carried out which estimates the costs of an unconditioned EU 30 % emission reduction target. The analyses are carried out with the dynamic Computable General

Particle Reduction Strategies - PAREST. Traffic emission modelling. Model comparision and alternative scenarios. Sub-report

International Nuclear Information System (INIS)

Kugler, Ulrike; Theloke, Jochen; Joerss, Wolfram

2013-01-01

The modeling of the reference scenario and the various reduction scenarios in PAREST was based on the Central System of Emissions (CSE) (CSE, 2007). Emissions from road traffic were calculated by using the traffic emission model TREMOD (Knoerr et al., 2005) and fed into the CSE. The version TREMOD 4.17 has been used. The resulting emission levels in PAREST reference scenario were supplemented by the emission-reducing effect of the implementation of the future Euro 5 and 6 emission standards for cars and light commercial vehicles and Euro VI for heavy commercial vehicles in combination with the truck toll extension. [de

Inventory and Policy Reduction Potential of Greenhouse Gas and Pollutant Emissions of Road Transportation Industry in China

Directory of Open Access Journals (Sweden)

Ye Li

2016-11-01

Full Text Available In recent years, emissions from the road transportation industry in China have been increasing rapidly. To evaluate the reduction potential of greenhouse gas and pollutant emissions of the industry in China, its emission inventory was calculated and scenario analysis was created for the period between 2012 and 2030 in this paper. Based on the Long-range Energy Alternatives Planning System (LEAP model, the development of China’s road transportation industry in two scenarios (the business-as-usual (BAU scenario and the comprehensive-mitigation (CM scenario was simulated. In the Comprehensive Mitigation scenario, there are nine various measures which include Fuel Economy Standards, Auto Emission Standards, Energy-saving Technology, Tax Policy, Eco-driving, Logistics Informatization, Vehicle Liquidation, Electric Vehicles, and Alternative Fuels. The cumulative energy and emission reductions of these specific measures were evaluated. Our results demonstrate that China’s road transportation produced 881 million metric tons of CO2 and emitted 1420 thousand tons of CO, 2150 thousand tons of NOx, 148 thousand tons of PM10, and 745 thousand tons of HC in 2012. The reduction potential is quite large, and road freight transportation is the key mitigation subsector, accounting for 85%–92% of the total emission. For energy conservation and carbon emission mitigation, logistics informatization is the most effective method, potentially reducing 1.80 billion tons of coal equivalent and 3.83 billion tons of CO2 from 2012 to 2030. In terms of air pollutant emission mitigation, the auto emission standards measure performs best with respect to NOx, PM10, and HC emission mitigation, and logistic informatization measure is the best in CO emission reduction. In order to maximize the mitigation potential of China’s road transportation industry, the government needs to implement various measures in a timely and strict fashion.

Transformative Reduction of Transportation Greenhouse Gas Emissions. Opportunities for Change in Technologies and Systems

Energy Technology Data Exchange (ETDEWEB)

Vimmerstedt, Laura [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Brown, Austin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Newes, Emily [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Markel, Tony [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Schroeder, Alex [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Yimin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Chipman, Peter [U.S. Department of Transportation, Washington, D.C. (United States); Johnson, Shawn [U.S. Department of Transportation, Washington, D.C. (United States)

2015-04-30

The transportation sector is changing, influenced by concurrent, ongoing, dynamic trends that could dramatically affect the future energy landscape, including effects on the potential for greenhouse gas emissions reductions. Battery cost reductions and improved performance coupled with a growing number of electric vehicle model offerings are enabling greater battery electric vehicle market penetration, and advances in fuel cell technology and decreases in hydrogen production costs are leading to initial fuel cell vehicle offerings. Radically more efficient vehicles based on both conventional and new drivetrain technologies reduce greenhouse gas emissions per vehicle-mile. Net impacts also depend on the energy sources used for propulsion, and these are changing with increased use of renewable energy and unconventional fossil fuel resources. Connected and automated vehicles are emerging for personal and freight transportation systems and could increase use of low- or non-emitting technologies and systems; however, the net effects of automation on greenhouse gas emissions are uncertain. The longstanding trend of an annual increase in transportation demand has reversed for personal vehicle miles traveled in recent years, demonstrating the possibility of lower-travel future scenarios. Finally, advanced biofuel pathways have continued to develop, highlighting low-carbon and in some cases carbon-negative fuel pathways. We discuss the potential for transformative reductions in petroleum use and greenhouse gas emissions through these emerging transportation-sector technologies and trends and present a Clean Transportation Sector Initiative scenario for such reductions, which are summarized in Table ES-1.

The impact of a 50% reduction of solid waste disposal in Canada on methane emissions from landfills in 2000

International Nuclear Information System (INIS)

Patenaude, L.M.F.; Owen, G.T.; Barclay, J.A.

1993-01-01

Canada's Green Plan established a goal of 50% reduction in municipal solid waste (MSW) disposal between 1988 and the year 2000. Canada has also committed to stabilizing greenhouse gas emissions at 1990 levels by 2000. MSW landfills are targeted since they account for a significant portion of anthropogenic methane emissions. Current composition and quantities of MSW were estimated. Using five scenarios for achieving a 50% reduction of waste disposed, the quantities and composition of waste managed were estimated through to the year 2000. A first-order decay model was used to estimate methane emissions from landfills of each scenario by varying the methane generation potential (L o ) based on the amount of biodegradable carbon in the MSW stream. Despite the overall reduction in waste, methane emissions are still projected on increase between 1990 and 2000 for scenarios with 25 to 45% of waste going to landfill in 2000. The estimated increases in methane emissions range from 2% for the high composting scenario to 16% for the high landfill scenario. In general, emissions peak during the 1990's and are decreasing by 2000. The projected increase in emissions is due to the 65--75% contribution of MSW landfilled before 1990. In conclusion, a significant reduction in methane emissions from landfills by 2000 will require methane recovery systems in addition to MSW reduction initiatives

Estimating CO{sub 2} Emission Reduction of Non-capture CO{sub 2} Utilization (NCCU) Technology

Energy Technology Data Exchange (ETDEWEB)

Lee, Ji Hyun; Lee, Dong Woog; Gyu, Jang Se; Kwak, No-Sang; Lee, In Young; Jang, Kyung Ryoung; Shim, Jae-Goo [KEPCO Research Institute, Daejon (Korea, Republic of); Choi, Jong Shin [Korea East-West Power Co., LTD(ETP), Ulsan (Korea, Republic of)

2015-10-15

Estimating potential of CO{sub 2} emission reduction of non-capture CO{sub 2} utilization (NCCU) technology was evaluated. NCCU is sodium bicarbonate production technology through the carbonation reaction of CO{sub 2} contained in the flue gas. For the estimating the CO{sub 2} emission reduction, process simulation using process simulator (PRO/II) based on a chemical plant which could handle CO{sub 2} of 100 tons per day was performed, Also for the estimation of the indirect CO{sub 2} reduction, the solvay process which is a conventional technology for the production of sodium carbonate/sodium bicarbonate, was studied. The results of the analysis showed that in case of the solvay process, overall CO{sub 2} emission was estimated as 48,862 ton per year based on the energy consumption for the production of NaHCO{sub 3} (7.4 GJ/tNaHCO{sub 3}). While for the NCCU technology, the direct CO{sub 2} reduction through the CO{sub 2} carbonation was estimated as 36,500 ton per year and the indirect CO{sub 2} reduction through the lower energy consumption was 46,885 ton per year which lead to 83,385 ton per year in total. From these results, it could be concluded that sodium bicarbonate production technology through the carbonation reaction of CO{sub 2} contained in the flue was energy efficient and could be one of the promising technology for the low CO{sub 2} emission technology.

A comprehensive analysis of China's regional energy saving and emission reduction efficiency: From production and treatment perspectives

International Nuclear Information System (INIS)

Wu, Jie; Lv, Lin; Sun, Jiasen; Ji, Xiang

2015-01-01

Energy and environmental issues have recently aroused increasing interest in China and many approaches are used to evaluate energy and environmental performance. In this paper, a two-stage network DEA framework is applied to evaluate the efficiency of energy saving and emission reduction in China during the period of the eleventh five-year plan, from 2006 to 2010. In this study, economic activities are divided into production and treatment processes. This is different from previous research which generally focused on either environmental efficiency or energy efficiency, omitting the integration of energy and environmental measures. Today, energy saving and emission reduction are both parts of the basic state policy of China and are equally important. The empirical results in this study show that: (i) eastern China has the best energy saving and emission reduction efficiency, performing is better than western and central China. (ii) The efficiency of the production process in central China is better than that in western China while the western area performs better than the central area in term of treatment efficiency. (iii) Integrated efficiency of energy saving and emission reduction of China was relatively stable in the five years and the pollution treatment efficiency maintained a rising trend. -- Highlights: •We measured China's regional energy saving and emission reduction efficiency using two-stage DEA approach. •The production and treatment processes are incorporated in evaluation. •Eastern China performs best in terms of energy saving and emission reduction efficiency. •Integrated efficiency of energy saving and emission reduction of China kept a stable trend during 2006–2010

Primary Aluminum Reduction Industry - National Emission Standards for Hazardous Air Pollutants (NESHAP)

Science.gov (United States)

National emission standards for each new or existing potline, paste production operation, and anode bake furnace associated with a primary aluminum reduction plant. Includes rule history, implementation information and additional resources.

Net radiative forcing and air quality responses to regional CO emission reductions

Directory of Open Access Journals (Sweden)

M. M. Fry

2013-05-01

Full Text Available Carbon monoxide (CO emissions influence global and regional air quality and global climate change by affecting atmospheric oxidants and secondary species. We simulate the influence of halving anthropogenic CO emissions globally and individually from 10 regions on surface and tropospheric ozone, methane, and aerosol concentrations using a global chemical transport model (MOZART-4 for the year 2005. Net radiative forcing (RF is then estimated using the GFDL (Geophysical Fluid Dynamics Laboratory standalone radiative transfer model. We estimate that halving global CO emissions decreases global annual average concentrations of surface ozone by 0.45 ppbv, tropospheric methane by 73 ppbv, and global annual net RF by 36.1 mW m−2, nearly equal to the sum of changes from the 10 regional reductions. Global annual net RF per unit change in emissions and the 100 yr global warming potential (GWP100 are estimated as −0.124 mW m−2 (Tg CO−1 and 1.34, respectively, for the global CO reduction, and ranging from −0.115 to −0.131 mW m−2 (Tg CO−1 and 1.26 to 1.44 across 10 regions, with the greatest sensitivities for regions in the tropics. The net RF distributions show widespread cooling corresponding to the O3 and CH4 decreases, and localized positive and negative net RFs due to changes in aerosols. The strongest annual net RF impacts occur within the tropics (28° S–28° N followed by the northern midlatitudes (28° N–60° N, independent of reduction region, while the greatest changes in surface CO and ozone concentrations occur within the reduction region. Some regional reductions strongly influence the air quality in other regions, such as East Asia, which has an impact on US surface ozone that is 93% of that from North America. Changes in the transport of CO and downwind ozone production clearly exceed the direct export of ozone from each reduction region. The small variation in CO GWPs among world regions suggests that future international

Post-2012 climate regime. How industrial and developing nations can help to reduce emissions - assessing emission trends, reduction potentials, incentive systems and negotiation options

Energy Technology Data Exchange (ETDEWEB)

Duscha, Vicki; Graichen, Jakob; Healy, Sean; Schleich, Joachim; Schumacher, Katja [Oeko-Institut e.V., Berlin (Germany); Fraunhofer-Institut fuer System- und Innovationsforschung (ISI), Karlsruhe (Germany)

2010-06-15

This report analyses the emissions reduction targets submitted under the Copenhagen Accord by developed and developing countries in matters of four key questions: - Do the pledges add up to the emission reductions required necessary by science? - What are the costs associated with meeting the given targets? - Are the proposed emission reduction efforts of Annex I parties comparable? - What would comparable efforts look like taking country-specific socio-economic indicators into account? Secondary to these questions this report explores the economic and environmental implications of the submitted pledges and NAMAs. Furthermore, we analyze and assess the comparability of efforts of Annex I mitigation pledges compared to a range of socio-economic indicators that may provide a basis for a ''fair'' effort sharing agreement to achieve a given target. (orig.)

A multinational model for CO2 reduction: defining boundaries of future CO2 emissions in nine countries

International Nuclear Information System (INIS)

Kram, Tom; Hill, Douglas.

1996-01-01

A need to make substantial future reductions in greenhouse gas emissions would require major changes in national energy systems. Nine industrialized countries have explored the technical boundaries of CO 2 emission restrictions during the next 40 to 50 years using comparable scenario assumptions and a standard model, MARKAL. Quantitative results for the countries are shown side by side in a set of energy maps that compare the least-cost evolution of the national energy systems by the main factors that contribute to CO 2 emissions. The ability to restrict future CO 2 emissions and the most cost-effective measures for doing so differ among the countries; an international agreement that would mandate substantial emission restrictions among countries by an equal percentage reduction is clearly impossible. The results are a first step toward a basis for allocating such international reductions, and the multinational process by which they were produced provides an example for further international greenhouse gas abatement costing studies. (Author)

Gamma-emissions of some meteorites and terrestrial rocks. Evaluation of lunar soil radioactivity; Emissions gamma de quelques meteorites et roches terrestres. Evaluation de la radioactivite du sol lunaire

Energy Technology Data Exchange (ETDEWEB)

Nordemann, D. [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)

1966-07-01

The gamma-emissions of some terrestrial rocks and of the following meteorites: Bogou, Eagle-Station, Granes, and Dosso were studied by quantitative low background gamma spectrometry. These measurements and their interpretation lead to the evaluation of the possible gamma-emissions of several models of lunar soils. (author) [French] Les emissions gamma des meteorites Bogou, Eagle-Station, Granes et Dosso et de quelques roches terrestres ont ete etudiees par spectrometrie gamma quantitative a faible mouvement propre. Ces mesures et leur interpretation permettent d'evaluer les principales contributions des emissions gamma du sol lunaire pour des modeles de compositions possibles variees. (auteur)

Gamma-emissions of some meteorites and terrestrial rocks. Evaluation of lunar soil radioactivity; Emissions gamma de quelques meteorites et roches terrestres. Evaluation de la radioactivite du sol lunaire

Energy Technology Data Exchange (ETDEWEB)

Nordemann, D [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)

1966-07-01

The gamma-emissions of some terrestrial rocks and of the following meteorites: Bogou, Eagle-Station, Granes, and Dosso were studied by quantitative low background gamma spectrometry. These measurements and their interpretation lead to the evaluation of the possible gamma-emissions of several models of lunar soils. (author) [French] Les emissions gamma des meteorites Bogou, Eagle-Station, Granes et Dosso et de quelques roches terrestres ont ete etudiees par spectrometrie gamma quantitative a faible mouvement propre. Ces mesures et leur interpretation permettent d'evaluer les principales contributions des emissions gamma du sol lunaire pour des modeles de compositions possibles variees. (auteur)

Mixed Carbon Policies Based on Cooperation of Carbon Emission Reduction in Supply Chain

Directory of Open Access Journals (Sweden)

Yongwei Cheng

2017-01-01

Full Text Available This paper established cooperation decision model for a mixed carbon policy of carbon trading-carbon tax (environmental tax in a two-stage S-M supply chain. For three different cooperative abatement situations, we considered the supplier driven model, the manufacturer driven model, and the equilibrium game model. We investigated the influence of mixed carbon policy with constraint of reduction targets on supply chain price, productivity, profits, carbon emissions reduction rate, and so on. The results showed that (1 high-strength carbon policies do not necessarily encourage enterprises to effectively reduce emissions, and increasing market acceptance of low carbon products or raising the price of carbon quota can promote the benign reduction; (2 perfect competitive carbon market has a higher carbon reduction efficiency than oligarch carbon market, but their optimal level of cooperation is the same and the realized reduction rate is in line with the intensity of carbon policy; (3 the policy sensitivity of the carbon trading mechanism is stronger than the carbon tax; “paid quota mechanism” can subsidize the cost of abatement and improve reduction initiative. Finally, we use a numerical example to solve the optimal decisions under different market situations, validating the effectiveness of model and the conclusions.

Reduction of emissions and geological storage of CO2. Innovation an industrial stakes

International Nuclear Information System (INIS)

Mandil, C.; Podkanski, J.; Socolow, R.; Dron, D.; Reiner, D.; Horrocks, P.; Fernandez Ruiz, P.; Dechamps, P.; Stromberg, L.; Wright, I.; Gazeau, J.C.; Wiederkehr, P.; Morcheoine, A.; Vesseron, P.; Feron, P.; Feraud, A.; Torp, N.T.; Christensen, N.P.; Le Thiez, P.; Czernichowski, I.; Hartman, J.; Roulet, C.; Roberts, J.; Zakkour, P.; Von Goerne, G.; Armand, R.; Allinson, G.; Segalen, L.; Gires, J.M.; Metz, B.; Brillet, B.

2005-01-01

An international symposium on the reduction of emissions and geological storage of CO 2 was held in Paris from 15 to 16 September 2005. The event, jointly organized by IFP, ADEME and BRGM, brought together over 400 people from more than 25 countries. It was an opportunity to review the international stakes related to global warming and also to debate ways of reducing CO 2 emissions, taking examples from the energy and transport sectors. The last day was dedicated to technological advances in the capture and geological storage of CO 2 and their regulatory and economic implications. This document gathers the available transparencies and talks presented during the colloquium: Opening address by F. Loos, French Minister-delegate for Industry; Session I - Greenhouse gas emissions: the international stakes. Outlook for global CO 2 emissions. The global and regional scenarios: Alternative scenarios for energy use and CO 2 emissions until 2050 by C. Mandil and J. Podkanski (IEA), The stabilization of CO 2 emissions in the coming 50 years by R. Socolow (Princeton University). Evolution of the international context: the stakes and 'factor 4' issues: Costs of climate impacts and ways towards 'factor 4' by D. Dron (ENS Mines de Paris), CO 2 emissions reduction policy: the situation in the United States by D. Reiner (MIT/Cambridge University), Post-Kyoto scenarios by P. Horrocks (European Commission), Possibilities for R and D in CO 2 capture and storage in the future FP7 program by P. Fernandez Ruiz and P. Dechamps (European Commission). Session II - CO 2 emission reductions in the energy and transport sectors. Reducing CO 2 emissions during the production and conversion of fossil energies (fixed installations): Combined cycles using hydrogen by G. Haupt (Siemens), CO 2 emission reductions in the oil and gas industry by I. Wright (BP). Reducing CO 2 emissions in the transport sector: Sustainable transport systems by P. Wiederkehr (EST International), The prospects for reducing

Reduction of uranium and plutonium oxides by aluminum. Application to the recycling of plutonium; Reduction des oxydes d'uranium et de plutonium par l'aluminium application au recyclage du plutonium

Energy Technology Data Exchange (ETDEWEB)

Gallay, J [Commissariat a l' Energie Atomique, Valduc (France). Centre d' Etudes

1968-07-01

A process for treating plutonium oxide calcined at high temperatures (1000 to 2000 deg. C) with a view to recovering the metal consists in the reduction of this oxide dissolved in a mixture of aluminium, sodium and calcium fluorides by aluminium at about 1180 deg. C. The first part of the report presents the results of reduction tests carried out on the uranium oxides UO{sub 2} and U{sub 3}O{sub 8}; these are in agreement with the thermodynamic calculations of the exchange reaction at equilibrium. The second part describes the application of this method to plutonium oxides. The Pu-Al alloy obtained (60 per cent Pu) is then recycled in an aqueous medium. (author) [French] Un procede de traitement de l'oxyde de plutonium calcine a haute temperature (1000 deg. C a 2000 deg. C), en vue de la recuperation du metal, consiste a reduire cet oxyde dissous dans un melange de fluorures d'aluminium, de sodium et de calcium, par l'aluminium vers 1180 deg. C. Une premiere partie du rapport presente les resultats des essais de reduction des oxydes d'uranium UO{sub 2} et U{sub 3}O{sub 8}, en accord avec les resultats du calcul thermodynamique de la reaction d'echange a l'equilibre. Une seconde partie rend compte de l'application de cette methode a l'oxyde de plutonium. L'alliage Pu-Al obtenu (60 pour cent Pu) est ensuite recycle par voie aqueuse. (auteur)

International markets for greenhouse gas emission reduction policies - possibilities for integrating developing countries

DEFF Research Database (Denmark)

Halsnæs, K.; Olhoff, A.

2005-01-01

Greenhouse gas (GHG) emissions are affecting a global common: the climate, and as a global environmental problem with a public good character it provides attractive opportunities for minimising control costs through the use of emission trading markets. This paper introduces cost and benefit princ...... principles that can be applied to the assessment of global markets for GHG emission reduction options and evaluates the scope for and the potential economic gains of such markets.......Greenhouse gas (GHG) emissions are affecting a global common: the climate, and as a global environmental problem with a public good character it provides attractive opportunities for minimising control costs through the use of emission trading markets. This paper introduces cost and benefit...

Achieving Realistic Energy and Greenhouse Gas Emission Reductions in U.S. Cities

Science.gov (United States)

Blackhurst, Michael F.

2011-12-01

In recognizing that energy markets and greenhouse gas emissions are significantly influences by local factors, this research examines opportunities for achieving realistic energy greenhouse gas emissions from U.S. cities through provisions of more sustainable infrastructure. Greenhouse gas reduction opportunities are examined through the lens of a public program administrator charged with reducing emissions given realistic financial constraints and authority over emissions reductions and energy use. Opportunities are evaluated with respect to traditional public policy metrics, such as benefit-cost analysis, net benefit analysis, and cost-effectiveness. Section 2 summarizes current practices used to estimate greenhouse gas emissions from communities. I identify improved and alternative emissions inventory techniques such as disaggregating the sectors reported, reporting inventory uncertainty, and aligning inventories with local organizations that could facilitate emissions mitigation. The potential advantages and challenges of supplementing inventories with comparative benchmarks are also discussed. Finally, I highlight the need to integrate growth (population and economic) and business as usual implications (such as changes to electricity supply grids) into climate action planning. I demonstrate how these techniques could improve decision making when planning reductions, help communities set meaningful emission reduction targets, and facilitate CAP implementation and progress monitoring. Section 3 evaluates the costs and benefits of building energy efficiency are estimated as a means of reducing greenhouse gas emissions in Pittsburgh, PA and Austin, TX. Two policy objectives were evaluated: maximize GHG reductions given initial budget constraints or maximize social savings given target GHG reductions. This approach explicitly evaluates the trade-offs between three primary and often conflicting program design parameters: initial capital constraints, social savings

Environmental and economic effects of the Copenhagen pledges and more ambitious emission reduction targets

International Nuclear Information System (INIS)

Peterson, Everett B.; Schleich, Joachim; Duscha, Vicki

2011-01-01

A multi-region, multi-sector dynamic computable general equilibrium model is applied to explore the economic and welfare effects of the pledges submitted by developed countries (Annex I countries) and major developing (non-Annex I) countries for 2020 under the Copenhagen Accord. In addition to analyzing scenarios reflecting the upper and lower bounds of the Copenhagen Pledges, one additional policy scenario where Annex I countries as a group reduce CO 2 -emissions by 30% in 2020 compared to 1990 levels, and where major non-Annex I countries reduce CO 2 emissions 15% below baseline, is also analyzed. Economic effects are measured as changes in GDP compared to baseline and welfare effects are measured via the equivalent variation. Assuming that countries with emission targets may trade certificates, average reductions in GDP for countries with targets range between 0.1% and 0.7% in 2020 for the policy scenarios. While the GDP losses are larger for major non-Annex I countries with emission targets compared to Annex I countries, this is not the case for the changes in welfare. With the exception of Mexico, the welfare losses for the major non-Annex I regions, as a percentage of projected GDP in 2020, are lower than for the large Annex I countries. - Highlights: → Copenhagen pledges are not ambitious in terms of global CO 2 -emission reductions. → Copenhagen pledges are not costly in terms of global GDP or welfare losses. → Reductions in GDP and welfare in 2020 are not evenly distributed across regions.→ Major non-Annex I countries face relatively larger reductions in GDP compared with Annex I countries.→ Copenhagen pledges do not result in large amounts of carbon leakage.

Carbon Emission Reduction with Regard to Retailer’s Fairness Concern and Subsidies

Directory of Open Access Journals (Sweden)

Linghong Zhang

2018-04-01

Full Text Available This paper considers the impact of consumer environmental awareness (CEA, retailer’s fairness concern, and government subsidies on the two echelon supply chain with one manufacturer and one retailer. The manufacturer produces green products with carbon emission reduction. The government provides two types of alternative subsidies: a fixed subsidy (referred to as an F-type subsidy or a discount subsidy (referred to as a D-type subsidy to encourage the manufacturer to produce a product with a high carbon emission reduction rate. We aim to provide optimal solutions to the manufacturer and the retailer with regard to the retailer’s fairness concern and government subsidies; thus we discuss four decision scenarios: the benchmark model without the fairness concern and subsidy, the model with the retailer’s fairness concern, the model with fairness concern and the F-type subsidy, and the model with fairness concern and the D-type subsidy. We provide explicit solutions and numerical examples of the optimal carbon emission reduction rate, wholesale price, and retail price. Our study has four main findings: firstly, high consumer environmental awareness will benefit both the manufacturer and the retailer in the above four scenarios; secondly, the fairness concern and subsidy have a counter effect on the optimal strategies (the subsidy could alleviate the negative influence caused by retailer’s fairness concern; thirdly, the government could subsidize the retailer when there is unfairness in the supply chain so that the manufacturer could produce a product with lower carbon emission; finally, using the subsidy related to the environmental quality will be more helpful for improving environment quality, especially when the government has a budget constraint.

Assessment of CO2 emission reduction and identification of CDM potential in a township

Energy Technology Data Exchange (ETDEWEB)

Misra, R.; Aseri, Tarun Kumar; Jamuwa, Doraj Karnal [Department of Mechanical Engineering, Government Engineering College, Ajmer, Rajasthan (India); Bansal, V. [Department of Mechanical Engineering, Government Mahila Engineering College, Ajmer, Rajasthan (India)

2012-11-15

This paper presents the theoretical investigation of CDM opportunity in a township at Jaipur, India. The purpose of study is to identify and analyze the various opportunities viz., installation of solar water heater, energy efficient lighting, energy efficient air conditioners, and energy efficient submersible water pumps in desert coolers and thus achieve a considerable (65.7 %) reduction in GHG emissions. Out of the various opportunities considered, the retrofitting with solar water heater can be recommended for CDM. Though, the retrofitting with energy efficient lighting, energy efficient air conditioners and energy efficient submersible water pumps in desert coolers claimed CO2 emission reduction of 104.84, 25.92, and 36.94 tons per annum, respectively, but the only opportunity which got through CDM was retrofitting with solar water heater claiming 115.70 tCO2 (100 %) emission reductions per annum which could result into net earnings of 115.70 CERs. The simple and discounted payback period for all four project activities are also calculated with and without CDM and tax benefits.

Modeling analysis of urea direct injection on the NOx emission reduction of biodiesel fueled diesel engines

International Nuclear Information System (INIS)

An, H.; Yang, W.M.; Li, J.; Zhou, D.Z.

2015-01-01

Highlights: • The effects of urea direct injection on NO x emissions reduction was investigated. • Aqueous urea solution was proposed to be injected after the fuel injection process. • The optimized injection strategy achieved a reduction efficiency of 58%. • There were no severe impacts on the CO emissions and BSFC. - Abstract: In this paper, a numerical simulation study was conducted to explore the possibility of an alternative approach: direct aqueous urea solution injection on the reduction of NO x emissions of a biodiesel fueled diesel engine. Simulation studies were performed using the 3D CFD simulation software KIVA4 coupled with CHEMKIN II code for pure biodiesel combustion under realistic engine operating conditions of 2400 rpm and 100% load. The chemical behaviors of the NO x formation and urea/NO x interaction processes were modeled by a modified extended Zeldovich mechanism and urea/NO interaction sub-mechanism. To ensure an efficient NO x reduction process, various aqueous urea injection strategies in terms of post injection timing, injection angle, and injection rate and urea mass fraction were carefully examined. The simulation results revealed that among all the four post injection timings (10 °ATDC, 15 °ATDC, 20 °ATDC and 25 °ATDC) that were evaluated, 15 °ATDC post injection timing consistently demonstrated a lower NO emission level. The orientation of the aqueous urea injection was also shown to play a critical role in determining the NO x removal efficiency, and 50 degrees injection angle was determined to be the optimal injection orientation which gave the most NO x reduction. In addition, both the urea/water ratio and aqueous urea injection rate demonstrated important roles which affected the thermal decomposition of urea into ammonia and the subsequent NO x removal process, and it was suggested that 50% urea mass fraction and 40% injection rate presented the lowest NO emission levels. At last, with the optimized injection

Mobil emission reduction credits for natural gas vehicle programs

International Nuclear Information System (INIS)

Baker, G.F.

1993-01-01

Since the passage of the Clean Air Act Amendments in 1990, there has been increasing interest among regulators and business interests alike in innovative, market-based strategies to air quality control. In particular, larger metropolitan areas have begun to examine marketable emission reduction credit (ERC) programs. These programs limit the total allowable emissions in a non-attainment area, allocate these emission open-quotes creditsclose quotes among sources in the region, and allow the sources to redistribute their allowances through trading. This approach provides for the most cost-effective distribution of control burdens among affected sources, taking advantage of the differences in marginal control costs. Some control measures applied to mobile sources may be significantly less expensive than those applied to stationary sources, making mobile sources an excellent candidate for inclusion in an ERC program. However, there are several potential problems involving quantification, enforcement, and credit trading issues that hinder the development of mobile source ERC programs. This paper will evaluate those obstacles and discuss how they are being addressed in a Natural Gas Vehicle (NGV) program currently under development for the Houston ozone non-attainment area. Specifically, the study will outline the credit validation (i.e., quantification) procedure, including baseline emission determination and emission testing for each NGV in the program. In addition, the study will describe the vehicle/fuel consumption tracking system, and discuss issues related to credit trading with stationary sources. Finally, observations are made concerning the applicability of mobile ERC programs for other emission control measures such as old vehicle scrappage and vehicle Inspection and Maintenance programs

Estimation and reduction of CO2 emissions from crude oil distillation units

International Nuclear Information System (INIS)

Gadalla, M.; Olujic, Z.; Jobson, M.; Smith, R.

2006-01-01

Distillation systems are energy-intensive processes, and consequently contribute significantly to the greenhouse gases emissions (e.g. carbon dioxide (CO 2 ). A simple model for the estimation of CO 2 emissions associated with operation of heat-integrated distillation systems as encountered in refineries is introduced. In conjunction with a shortcut distillation model, this model has been used to optimize the process conditions of an existing crude oil atmospheric tower unit aiming at minimization of CO 2 emissions. Simulation results indicate that the total CO 2 emissions of the existing crude oil unit can be cut down by 22%, just by changing the process conditions accordingly, and that the gain in this respect can be doubled by integrating a gas turbine. In addition, emissions reduction is accompanied by substantial profit increase due to utility saving and/or export

Emissions from coal-fired electric stations : environmental health effects and reduction options

International Nuclear Information System (INIS)

Love, P.; Lourie, B.; Pengelly, D.; Labatt, S.; Ogilvie, K.; Kelly, B.

1998-01-01

Findings of a study on the environmental effects of current emissions from coal-fired electric stations were summarized. Current and projected emissions from coal-fired electric stations for five emission reduction scenarios were estimated for Ontario, Eastern Canada, Ohio Valley/Great Lakes, and the U.S. northeast regions. Coal-fired electric stations generate a wide range of environmentally significant air emissions. The five pollutants selected - sulphur dioxide, nitrogen oxides, particulate matter (less than 10 micrometres in size), mercury, and carbon dioxide - are considered to impact most on environmental health. This report focused on 312 coal-fired electric stations in the regions named above. They were selected based on the likelihood that long-range transport of the emissions from these coal-fired utilities would have an impact on human health and the environment. 55 refs., 10 tabs., 8 figs

Energy use, emissions and air pollution reduction strategies in Asia

International Nuclear Information System (INIS)

Foell, W.; Green, C.; Amann, M.; Bhattacharya, S.; Carmichael, G.; Chadwick, M.; Cinderby, S.; Haugland, T.; Hettelingh, J.-P.; Hordijk, L.; Kuylenstierna, J.; Shah, J.; Shrestha, R.; Streets, D.; Zhao, D.

1995-01-01

In contrast to Europe and North America, air pollution in Asia is increasing rapidly, resulting in both local air quality problems and higher acidic depositions. In 1989, an east-west group of scientists initiated a multi-institutional research project on Acid Rain and Emissions Reduction in Asia, funded for the past two years by the World Bank and the Asian Development Bank. Phase I, covering 23 countries of Asia, focused on the development of PC-based software called the Regional Air Pollution Information and Simulation Model (RAINS-ASIA). A 94-region Regional Energy Scenario Generator was developed to create alternative energy/emission scenarios through the year 2020. A long-range atmospheric transport model was developed to calculate dispersion and deposition of sulfur, based upon emissions from area and large point sources, on a one-degree grid of Asia. The resulting impacts of acidic deposition on a variety of vegetation types were analyzed using the critical loads approach to test different emissions management strategies, including both energy conservation measures and sulfur abatement technologies. 14 refs., 7 figs

Estimating the benefits of greenhouse gas emission reduction from agricultural policy reform

International Nuclear Information System (INIS)

Adger, W.N.; Moran, D.C.

1993-01-01

Land use and agricultural activities contribute directly to the increased concentrations of atmospheric greenhouse gases. Economic support in industrialized countries generally increases agriculture's contribution to global greenhouse gas concentrations through fluxes associated with land use change and other sources. Changes in economic support offers opportunities to reduce net emissions, through this so far has gone unaccounted. Estimates are presented here of emissions of methane from livestock in the UK and show that, in monetary terms, when compared to the costs of reducing support, greenhouse gases are a significant factor. As signatory parties to the Climate Change Convection are required to stabilize emissions of all greenhouse gases, options for reduction of emissions of methane and other trace gases from the agricultural sector should form part of these strategies

Low Carbon Grid Study: Analysis of a 50% Emission Reduction in California

Energy Technology Data Exchange (ETDEWEB)

Brinkman, Gregory [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jorgenson, Jennie [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ehlen, Ali [Center for Energy Efficiency and Renewable Technologies, Sacramento, CA (United States); Caldwell, James H. [Center for Energy Efficiency and Renewable Technologies, Sacramento, CA (United States)

2016-01-07

The California 2030 Low Carbon Grid Study (LCGS) analyzes the grid impacts of a variety of scenarios that achieve 50% carbon emission reductions from California's electric power sector. Impacts are characterized based on several key operational and economic metrics, including production costs, emissions, curtailment, and impacts on the operation of gas generation and imports. The modeling results indicate that achieving a low-carbon grid (with emissions 50% below 2012 levels) is possible by 2030 with relatively limited curtailment (less than 1%) if institutional frameworks are flexible. Less flexible institutional frameworks and a less diverse generation portfolio could lead to higher curtailment (up to 10%), operational costs (up to $800 million higher), and carbon emissions (up to 14% higher).

Greenhouse Emission Reductions and Natural Gas Vehicles: A Resource Guide on Technology Options and Project Development

Energy Technology Data Exchange (ETDEWEB)

Orestes Anastasia; NAncy Checklick; Vivianne Couts; Julie Doherty; Jette Findsen; Laura Gehlin; Josh Radoff

2002-09-01

Accurate and verifiable emission reductions are a function of the degree of transparency and stringency of the protocols employed in documenting project- or program-associated emissions reductions. The purpose of this guide is to provide a background for law and policy makers, urban planners, and project developers working with the many Greenhouse Gas (GHG) emission reduction programs throughout the world to quantify and/or evaluate the GHG impacts of Natural Gas Vehicle (NGVs). In order to evaluate the GHG benefits and/or penalties of NGV projects, it is necessary to first gain a fundamental understanding of the technology employed and the operating characteristics of these vehicles, especially with regard to the manner in which they compare to similar conventional gasoline or diesel vehicles. Therefore, the first two sections of this paper explain the basic technology and functionality of NGVs, but focus on evaluating the models that are currently on the market with their similar conventional counterparts, including characteristics such as cost, performance, efficiency, environmental attributes, and range. Since the increased use of NGVs, along with Alternative Fuel Vehicle (AFVs) in general, represents a public good with many social benefits at the local, national, and global levels, NGVs often receive significant attention in the form of legislative and programmatic support. Some states mandate the use of NGVs, while others provide financial incentives to promote their procurement and use. Furthermore, Federal legislation in the form of tax incentives or procurement requirements can have a significant impact on the NGV market. In order to implement effective legislation or programs, it is vital to have an understanding of the different programs and activities that already exist so that a new project focusing on GHG emission reduction can successfully interact with and build on the experience and lessons learned of those that preceded it. Finally, most programs

Cycle update : advanced fuels and technologies for emissions reduction

Energy Technology Data Exchange (ETDEWEB)

Smallwood, G. [National Research Council of Canada, Ottawa, ON (Canada)

2009-07-01

This paper provided a summary of key achievements of the Program of Energy Research and Development advanced fuels and technologies for emissions reduction (AFTER) program over the funding cycle from fiscal year 2005/2006 to 2008/2009. The purpose of the paper was to inform interested parties of recent advances in knowledge and in science and technology capacities in a concise manner. The paper discussed the high level research and development themes of the AFTER program through the following 4 overarching questions: how could advanced fuels and internal combustion engine designs influence emissions; how could emissions be reduced through the use of engine hardware including aftertreatment devices; how do real-world duty cycles and advanced technology vehicles operating on Canadian fuels compare with existing technologies, models and estimates; and what are the health risks associated with transportation-related emissions. It was concluded that the main issues regarding the use of biodiesel blends in current technology diesel engines are the lack of consistency in product quality; shorter shelf life of biodiesel due to poorer oxidative stability; and a need to develop characterization methods for the final oxygenated product because most standard methods are developed for hydrocarbons and are therefore inadequate. 2 tabs., 13 figs.

The importance of economies of scale for reductions in greenhouse gas emissions from shipping

International Nuclear Information System (INIS)

Lindstad, Haakon; Asbjørnslett, Bjørn E.; Strømman, Anders H.

2012-01-01

CO 2 emissions from maritime transport represent 3.3% of the world's total CO 2 emissions and are forecast to increase by 150%–250% by 2050, due to increased freight volumes (). Fulfilling anticipated climate requirements () could require the sector to reduce emissions per freight unit by a factor of five or six. The International Maritime Organization (IMO) is currently debating technical, operational and market-based measures for reducing greenhouse gas emissions from shipping. This paper also investigates the effects of economies of scale on the direct emissions and costs of maritime transport. We compared emissions from the current fleet (2007), with what can be achieved by increasing average vessel size. The comparison is based on the 2007 levels of trade and predictions for 2050. The results show that emissions can be reduced by up to 30% at a negative abatement cost per ton of CO 2 by replacing the existing fleet with larger vessels. Replacing the whole fleet might take as long as 25 years, so the reduction in emissions will be achieved gradually as the current fleet is renewed. - Highlights: ► We investigate the effects of economy of scale for reduction of GHG emissions from shipping. ► Model includes both cost and emission as function of vessel size and type. ► Model is based on operational patterns as of today for the different vessel types and sizes. ► Comparison is based on actual 2007 tonnages and foreseen 2050 levels of trading. ► Results shows that emissions can be reduced by 25%–30% at a negative abatement cost.

Reduction of emissions from Brazilian cattle raising and the generation of energy: Intensification and confinement potentials

International Nuclear Information System (INIS)

Palermo, Giuseppe Cernicchiaro; D'Avignon, Alexandre Louis de Almeida; Freitas, Marcos Aurélio Vasconcelos

2014-01-01

The identification of the main sources of anthropic greenhouse gas emissions (GHG) associated with the mitigation and removal of these emissions has become an important instrument in the attenuation of the climatic changes predicted by the IPCC. The largest emission source in Brazil is forest conversion. This land use change has always had a strong relationship with the expansion of agriculture, an activity of great importance in the country, which has the largest commercial cattle herd in the planet. Following the considerable reduction in emissions from deforestation, agriculture has been since 2010 the most important source (MCTI (Ministério da Ciência, Tecnologia e Inovação), 2013. Brasília: Ministério daCiência, Tecnologia e Inovação, Brasil). Seeking to discover the possibilities of altering the emissions profile in the agricultural sector, four scenarios were developed related to how this is dealt with in the beef cattle sector, calculating the potential removal of carbon from the atmosphere through natural regeneration of biomes. The results suggest that picketing and rotation scenario has the greatest potential, with a carbon reduction of 17.7 Gt CO 2 eq, while the shared raising with grain legumes scenario has the lowest calculated reduction potential of 7.1 Gt CO 2 eq was calculated. The animal confinement scenario had an intermediary reduction potential of 8.3 Gt CO 2 eq. The mosaic of methods scenario, in which it is attempted to simulate the parallel adoption of the measures proposed in all other scenarios, had a reduction potential of 13.1 Gt CO 2 eq. In the scenarios where animal confinement occurs, the treatment of waste with biodigestion allows the generation of biogas and biofertilizers, contributing to an increase in the potential carbon reduction. - Highlights: • We identify one main source of anthropic GHG in Brazil after forest conversion (deforestation), the beef cattle raising. • Four scenarios to mitigate emissions from cattle

Study on CO2 emission reduction using ENPEP in Korea

International Nuclear Information System (INIS)

Moon, K. H.; Kim, S. S.; Song, K. D.; Im, C. Y.

2003-01-01

ENPEP was used to analyze the role of nuclear power in mitigating carbon emission in power generation sector. In this study, base scenario reflects business as usual case in Korea. Additional two scenarios were established. One stands for fuel switch scenario, where nuclear power plants scheduled to be introduced after 2008 were assumed to be replaced by Coal Power Plant, the other one is established to see the impact of carbon tax. In this scenario carbon tax(50$/ton-C0 2 ) is imposed on coal power plants from 2008. It is resulted that fuel switch from nuclear to coal in power generation sector has a great effect on CO 2 emission, while carbon tax imposition makes a slight contribution to the reduction of CO 2 emission. These findings mean that the role of nuclear power in Korea is important in view of the GHG mitigation

Environment and mobility 2050: scenarios for a 75% reduction in CO2 emissions

International Nuclear Information System (INIS)

Lopez-Ruiz, H.G.

2009-10-01

In France an objective of dividing greenhouse gas emissions by four, from the 1990 level, by 2050 has been set. Are these ambitions out of our reach? What will the price to pay for this objective be? We have built a long-term back-casting transport demand model (TILT, Transport Issues in the Long Term) . This model is centered on defined behavior types - in which the speed-GDP elasticity plays a key role - in order to determine demand estimations. This model lets us understand past tendencies - the coupling between growth and personal and freight mobility and adapt behavioral hypothesis - linked to the evolution of public policies - in order to show how a 75% reduction objective can be attained. The main results are an estimation of CO 2 emissions for the transport sector taking into account technical progress and demand. These results are presented as three scenario families named: Pegasus, Chronos and Hestia. Each family corresponds to a growing degree of constraint on mobility. It is possible to divide greenhouse gas emissions in the transport sector by four. Technical progress is able to lead to more than half of these reductions. The interest of these scenarios is to show that there exist different paths - through organizational change - to getting the other half of the reductions. (author)

Atmospheric pollution reduction effect and regional predicament: An empirical analysis based on the Chinese provincial NOx emissions.

Science.gov (United States)

Ding, Lei; Liu, Chao; Chen, Kunlun; Huang, Yalin; Diao, Beidi

2017-07-01

Atmospheric pollution emissions have become a matter of public concern in recent years. However, most of the existing researches on NOx pollution are from the natural science and technology perspective, few studies have been conducted from an economic point, and regional differences have not been given adequate attention. This paper adopts provincial panel data from 2006 to 2013 and the LMDI model to analyze the key driving factors and regional dilemmas of NOx emissions. The results show that significant regional disparities still exit on NO x emissions and its reduction effect 27 provinces didn't accomplish their corresponding reduction targets. Economic development factor is the dominating driving factor of NO x emissions during the study period, while energy efficiency and technology improvement factors offset total NO x emissions in the majority of provinces. In addition, the industrial structure factor plays a more significant role in reducing the NO x emissions after 2011. Therefore, the government should consider all these factors as well as regional heterogeneity in developing appropriate pollution mitigating policies. It's necessary to change NOx emissions control attitude from original key areas control to divided-zone control, not only attaches great importance to the reduction of the original key areas, but also emphasizes the new potential hotspots with high NO x emissions. Copyright © 2017 Elsevier Ltd. All rights reserved.

Air quality and emissions reduction initiatives at the City of Calgary

International Nuclear Information System (INIS)

Stone, K.

2001-01-01

To conserve, protect and improve the environment for the benefits of the citizens living in Calgary, the City of Calgary is committed to environmental leadership, as declared by the author as an opening statement to this Power Point presentation. The author described some of the partnerships and alliances to which the City of Calgary adheres, such as partner for climate protection program, the Federation of Canadian Municipalities and the International Council for Local Environmental Initiatives (ICLEI). The City is aiming at a 20 per cent reduction of 1990 greenhouse gas emission levels within ten years for municipal operations. The Greenhouse Gas Reduction Commitment is divided in three parts: (1) baseline inventory, (2) economic and emissions abatement assessment, and (3) implementation and each phase was explained. Phase 1 relates to an inventory of equivalent carbon dioxide as a standardized measure of greenhouse gases. Both municipal and corporate reduction targets have been identified, as well as targets for buildings. An innovative cooperative partnership with private industry has been initiated, called the energy performance contracting (EPC), where EPC provides upgraded building infrastructure with more energy efficient equipment. The entire concept was detailed. Other initiatives include green power substitutions and street lighting retrofits. The author concluded by providing a greenhouse gas reduction score sheet. Some initiatives at the community level include Web business office/Web initiatives, a public education outreach program and third party agencies. figs

Limited emission reductions from fuel subsidy removal except in energy-exporting regions

Science.gov (United States)

Jewell, Jessica; McCollum, David; Emmerling, Johannes; Bertram, Christoph; Gernaat, David E. H. J.; Krey, Volker; Paroussos, Leonidas; Berger, Loïc; Fragkiadakis, Kostas; Keppo, Ilkka; Saadi, Nawfal; Tavoni, Massimo; van Vuuren, Detlef; Vinichenko, Vadim; Riahi, Keywan

2018-02-01

Hopes are high that removing fossil fuel subsidies could help to mitigate climate change by discouraging inefficient energy consumption and levelling the playing field for renewable energy. In September 2016, the G20 countries re-affirmed their 2009 commitment (at the G20 Leaders’ Summit) to phase out fossil fuel subsidies and many national governments are using today’s low oil prices as an opportunity to do so. In practical terms, this means abandoning policies that decrease the price of fossil fuels and electricity generated from fossil fuels to below normal market prices. However, whether the removal of subsidies, even if implemented worldwide, would have a large impact on climate change mitigation has not been systematically explored. Here we show that removing fossil fuel subsidies would have an unexpectedly small impact on global energy demand and carbon dioxide emissions and would not increase renewable energy use by 2030. Subsidy removal would reduce the carbon price necessary to stabilize greenhouse gas concentration at 550 parts per million by only 2-12 per cent under low oil prices. Removing subsidies in most regions would deliver smaller emission reductions than the Paris Agreement (2015) climate pledges and in some regions global subsidy removal may actually lead to an increase in emissions, owing to either coal replacing subsidized oil and natural gas or natural-gas use shifting from subsidizing, energy-exporting regions to non-subsidizing, importing regions. Our results show that subsidy removal would result in the largest CO2 emission reductions in high-income oil- and gas-exporting regions, where the reductions would exceed the climate pledges of these regions and where subsidy removal would affect fewer people living below the poverty line than in lower-income regions.

Limited emission reductions from fuel subsidy removal except in energy-exporting regions.

Science.gov (United States)

Jewell, Jessica; McCollum, David; Emmerling, Johannes; Bertram, Christoph; Gernaat, David E H J; Krey, Volker; Paroussos, Leonidas; Berger, Loïc; Fragkiadakis, Kostas; Keppo, Ilkka; Saadi, Nawfal; Tavoni, Massimo; van Vuuren, Detlef; Vinichenko, Vadim; Riahi, Keywan

2018-02-07

Hopes are high that removing fossil fuel subsidies could help to mitigate climate change by discouraging inefficient energy consumption and levelling the playing field for renewable energy. In September 2016, the G20 countries re-affirmed their 2009 commitment (at the G20 Leaders' Summit) to phase out fossil fuel subsidies and many national governments are using today's low oil prices as an opportunity to do so. In practical terms, this means abandoning policies that decrease the price of fossil fuels and electricity generated from fossil fuels to below normal market prices. However, whether the removal of subsidies, even if implemented worldwide, would have a large impact on climate change mitigation has not been systematically explored. Here we show that removing fossil fuel subsidies would have an unexpectedly small impact on global energy demand and carbon dioxide emissions and would not increase renewable energy use by 2030. Subsidy removal would reduce the carbon price necessary to stabilize greenhouse gas concentration at 550 parts per million by only 2-12 per cent under low oil prices. Removing subsidies in most regions would deliver smaller emission reductions than the Paris Agreement (2015) climate pledges and in some regions global subsidy removal may actually lead to an increase in emissions, owing to either coal replacing subsidized oil and natural gas or natural-gas use shifting from subsidizing, energy-exporting regions to non-subsidizing, importing regions. Our results show that subsidy removal would result in the largest CO 2 emission reductions in high-income oil- and gas-exporting regions, where the reductions would exceed the climate pledges of these regions and where subsidy removal would affect fewer people living below the poverty line than in lower-income regions.

Possible pathways for dealing with Japan's post-Fukushima challenge and achieving CO2 emission reduction targets in 2030

International Nuclear Information System (INIS)

Su, Xuanming; Zhou, Weisheng; Sun, Faming; Nakagami, Ken'Ichi

2014-01-01

Considering the unclear nuclear future of Japan after Fukushima Dai-ichi nuclear power plant accident since Mar. 11, 2011, this study assesses a series of energy consumption scenarios including the reference scenario, nuclear limited scenarios and current nuclear use level scenario for Japan in 2030 by the G-CEEP (Glocal Century Energy Environment Planning) model. The simulation result for each scenario is firstly presented in terms of primary energy consumption, electricity generation, CO 2 emission, marginal abatement cost and GDP (gross domestic product) loss. According to the results, energy saving contributes the biggest share in total CO 2 emission reduction, regardless of different nuclear use levels and different CO 2 emission reduction levels. A certain amount of coal generation can be retained in the nuclear limited scenarios due to the applying of CCS (carbon capture and storage). The discussion indicates that Japan needs to improve energy use efficiency, increase renewable energy and introduce CCS in order to reduce the dependence on nuclear power and to achieve CO 2 emission reduction target in 2030. In addition, it is ambitious for Japan to achieve the zero nuclear scenario with 30% CO 2 emission reduction which will cause a marginal abatement cost of 383 USD/tC and up to −2.54% GDP loss from the reference scenario. Dealing with the nuclear power issue, Japan is faced with a challenge as well as an opportunity. - Highlights: • Nuclear use limited and carbon emission reduction scenarios for Japan in 2030. • Contributions of different abatement options to carbon emissions. • CCS for reducing dependence on nuclear power

Assessment of GHG Emission Reduction Potential from Source-separated Organic Waste (SOW) Management: Case Study in a Higher Educational Institution in Malaysia

International Nuclear Information System (INIS)

Ng, C.G.; Sumiani Yusoff

2015-01-01

In Malaysia, the greenhouse gases (GHGs) emissions reduction via composting of source-separated organic waste (SOW) in municipal solid waste (MSW) has not been assessed. Assessment of GHG emissions reduction via composting of SOW is important as environmental impacts from waste management are waste-specific and local-specific. The study presents the case study for potential carbon reduction via composting of SOW in University of Malaya (UM). In this study, a series of calculations were used to evaluate the GHG emission of different SOW management scenarios. The calculations based on IPCC calculation methods (AM0025) include GHGs emissions from land filling, fuel consumption in transportation and SOW composting activity. The methods were applied to assess the GHG emissions from five alternative SOW management scenarios in UM. From the baseline scenario (S0), a total of 1,636.18 tCO2e was generated. In conjunction with target of 22 % recycling rate, as shown in S1, 14 % reduction in potential GHG emission can be achieved. The carbon reduction can be further enhanced by increasing the SOW composting capacity. The net GHG emission for S1, S2, S3 and S4 were 1,399.52, 1,161.29, 857.70 and 1,060.48 tCO2e, respectively. In general, waste diversion for composting proved a significant net GHG emission reduction as shown in S3 (47 %), S4 (35 %) and S2 (29 %). Despite the emission due to direct on-site activity, the significant reduction in methane generation at landfill has reduced the net GHG emission. The emission source of each scenario was studied and analysed. (author)

Performance and emission reduction potential of micro-gasifier improved through better design

Directory of Open Access Journals (Sweden)

Kamil Dino Adem

2017-01-01

Full Text Available Biomass gasification is getting popular for household cooking application in most developing countries including Ethiopia. The preference for biomass gasification is due to the generation of less CO (Carbon Monoxide and PM (Particulate Matter in comparison with other biomass cookstoves. Our study showed the improvement in thermal efficiency and emission reduction potential of micro-gasifier. A prototype micro-gasifier was built and tested using the water boiling test protocol. The test results gave a thermal efficiency of 39.6% and a specific fuel consumption of 57 g of fuel/ liter of water. With regard to indoor air pollution, the maximum CO & PM registered were 12.5 ppm and 1.85 mg/m3, respectively. Using clean development mechanism (CDM methodology, the estimated emission reduction potential of the micro-gasifier is 1.30 tCO2 per micro-gasifier per year. Generally, the micro-gasifier has better performance compared to the previous designs proposed by other researchers. Thus, disseminating our micro-gasifier at a larger scale in developing countries such as Ethiopia will be beneficial in reducing deforestation and emission that will be brought about by using open-fire stoves and thus, helps to obtain carbon credit.

Reduction of greenhouse gas emission on a medium-pressure boiler using hydrogen-rich fuel control

International Nuclear Information System (INIS)

Hsieh, S.-C.; Jou, Chih-Ju G.

2007-01-01

The increasing emission of greenhouse gases from the combustion of fossil fuel is believed to be responsible for global warming. A study was carried out to probe the influence of replacing fuel gas with hydrogen-rich refinery gas (R.G.) on the reduction of gas emission (CO 2 and NO x ) and energy saving. Test results show that the emission of CO 2 can be reduced by 16.4% annually (or 21,500 tons per year). The NO x emission can be 8.2% lower, or 75 tons less per year. Furthermore, the use of refinery gas leads to a saving of NT$57 million (approximately US$1.73 million) on fuel costs each year. There are no CO 2 , CO, SO x , unburned hydrocarbon, or particles generated from the combustion of added hydrogen. The hydrogen content in R.G. employed in this study was between 50 and 80 mol%, so the C/H ratio of the feeding fuel was reduced. Therefore, the use of hydrogen-rich fuel has practical benefits for both energy saving and the reduction of greenhouse gas emission

An empirical study on the institutional factors of energy conservation and emissions reduction: Evidence from listed companies in China

International Nuclear Information System (INIS)

Zhang, Zhaoguo; Jin, Xiaocui; Yang, Qingxiang; Zhang, Yi

2013-01-01

Corporate excessive energy consumption and emissions are negative externality problems, with the basic countermeasure of establishing a series of institutional programs to promote corporate energy conservation and emissions reduction. This paper analyzes the influence of institutional factors such as laws, tax policies, credit policies, government subsidies, media supervision and marketization degree on corporate energy conservation and emissions reduction from the institutional perspective. The data, from 84 listed Chinese chemical and steel companies from 2006 to 2010, was analyzed using both a fixed effect model and the generalized method of moments (GMM) model. The empirical results demonstrate that these institutional factors positively affect corporate energy conservation and emissions reduction. Specifically, four factors – tax policies, government subsidies, credit policies and media supervision – have a significant positive relationship with corporate energy conservation and emissions reduction; whereas laws and marketization degree exhibit no significant effects. The research findings are theoretically and practically significant to the Chinese government with regard to improving the institutional environment and promoting corporate energy conservation and emissions reduction. - Highlights: ► Theoretical analysis of the influence of institutional factors based on NIE. ► Empirical analysis of the influence of institutional factors on ECER by regression. ► Economic measures and public opinions have positive influence on ECER in China. ► Laws and the degree of marketization have weak influence on ECER in China

Influence de la nature des fuels lourds sur la qualité de leur combustion Influence of Heavy Fuel Oil Composition on Particulate Emissions

Directory of Open Access Journals (Sweden)

Feugier A.

2006-11-01

Full Text Available A partir d'études de combustion de fuels lourds numéro 2 effectuées dans une chaudière de 1 MW et dans un foyer de 0,1 MW, on conclut que le résidu de Carbone Conradson (CCR des fuels est un bon indicateur de leur combustibilité, mais qu'il n'est pas suffisant dans tous les cas, c'est-à-dire que pour un même CCR, on peut mesurer des valeurs différentes en indice pondéral. Plusieurs interpréta. tions possibles ont été proposées et vérifiées : a Le résidu de Carbone Conradson, résultat d'une pyrolyse lente, est une procédure qui n'est pas suffisamment représentative des conditions réelles. Or, en soumettant un certain nombre de fuels à une pyrolyse flash (technique de la grille chauffée, on observe une bonne corrélation entre la quantité de résidu résultant et le CCR. Donc, ce dernier reste un bon indicateur de combustibilité. b Pour les fuels ex résidu atmosphérique, ex résidu sous-vide et ex désasphaltage, on détermine de satisfaisantes corrélations entre le CCR et certaines caractéristiques physico-chimiques de la fraction lourde des fuels (point de coupe choisi 450°C : polyaromaticité (mesurée par RMN du Carbone 13, C/H, masse moléculaire. Cependant, les fuels de visco-réduction satisfont à d'autres corrélations, de même que les résidus de vapocraquage. Donc, pour ces classes de fuels, on peut prévoir des anomalies entre indice pondéral et CCR, ce qui est observé dans certains équipements. c On observe que pour une même valeur de CCR, la proportion relative entre fractions légères et fractions lourdes des fuels peut parfois varier très sensiblement avec pour conséquence des modifications dans les cartes de richesse et de température des flammes résultantes, et donc des variations dans les émissions particulaires. L'importance de telles variations dépendra des types de brûleurs et de chambres de combustion dans lesquelles la flamme se développera. On the basis of combustion runs of

Emission reductions through precombustion chamber design in a natural gas, lean burn engine

International Nuclear Information System (INIS)

Crane, M.E.; King, S.R.

1992-01-01

A study was conducted to evaluate the effects of various precombustion chamber design, operating and control parameters on the exhaust emissions of a natural gas engine. Analysis of the results showed that engine-out total hydrocarbons and oxides of nitrogen (NO x ) can be reduced, relative to conventional methods, through prechamber design. More specifically, a novel staged prechamber yielded significant reductions in NO x and total hydrocarbon emissions by promoting stable prechamber and main chamber ignition under fuel-lean conditions. Precise fuel control was also critical when balancing low emissions and engine efficiency (i.e., fuel economy). The purpose of this paper is to identify and explain positive and deleterious effects of natural gas prechamber design on exhaust emissions

Bioreducer use in blast furnace ironmaking in Finland:techno-economic assessment and CO₂ emission reduction potential

OpenAIRE

Suopajärvi, H. (Hannu)

2015-01-01

Abstract Most of the steel produced in the world is based on the integrated blast furnace-converter route, which is based on the use of virgin raw materials. Large amounts of fossil-based, carbon containing reductants are used in blast furnaces, which results in carbon dioxide emissions into the atmosphere. Fossil carbon dioxide emissions from steel production can be reduced by new technologies or moving from non-renewable to renewable energy sources. Biomass-based reductants could be one...

Some methods for the detection of fissionable matter; Quelques methodes de detection des corps fissiles

Energy Technology Data Exchange (ETDEWEB)

Guery, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-03-01

A number of equipments or processes allowing to detect uranium or plutonium in industrial plants, and in particular to measure solution concentrations, are studied here. Each method has its own field of applications and has its own performances, which we have tried to define by calculations and by experiments. The following topics have been treated: {gamma} absorptiometer with an Am source, detection test by neutron multiplication, apparatus for the measurement of the {alpha} activity of a solution, fissionable matter detection by {gamma} emission, fissionable matter detection by neutron emission. (author) [French] On examine ici plusieurs appareils ou procedes qui permettent de detecter l'uranium ou le plutonium dans les installations industrielles, et en particulier de mesurer les concentrations de solutions. Chacune des methodes a son domaine d'application et ses performances, qu'on a tente de definir par le calcul et par des experiences. Les sujets traites sont les suivants: absorptiometre {gamma} a source d'americium, essais de detection par multiplication neutronique, appareil de mesure de l'activite {alpha} d'une solution, detection des matieres fissiles par leur emission {gamma}, detection des matieres fissiles par leur emission neutronique. (auteur)

Incentives for subcontractors to adopt CO2 emission reporting and reduction techniques

International Nuclear Information System (INIS)

Scholtens, Bert; Kleinsmann, Renske

2011-01-01

We investigate the incentives for subcontractors (couriers) of a transport and logistics company to report about their CO 2 emissions and to implement CO 2 reducing technologies. Furthermore, we try to find out whether these incentives differ between British and Dutch couriers. We find that several incentives play a significant role. Subcontractors in the Netherlands predominantly are extrinsically motivated to engage in CO 2 reporting and reduction techniques. This is because they are mainly driven by regulatory compliance, energy costs and implementation costs. In contrast, British subcontractors are much more intrinsically motivated to comply. They are predominantly driven by energy costs, environmental awareness, relationship building and reputation building. The contractor will have to account for these differences in making its policies work. - Research highlights: → We investigate incentives for couriers to report CO 2 emissions and to implement CO 2 reduction techniques. → We compare couriers in the Netherlands and the United Kingdom. → Several incentives are significant for the adoption of CO 2 reporting and reduction measures. → There are significant differences in the sensitivity for incentives in the Netherlands and the UK.

Simulating greenhouse gas (GHG) allowance cost and GHG emission reduction in Western Europe

International Nuclear Information System (INIS)

Delarue, Erik; Lamberts, Hans; D'haeseleer, William

2007-01-01

Due to the growing concern for global warming, the EU25 have implemented the European Union Greenhouse Gas Emission Trading Scheme (EU ETS). In the first trading period (2005-2007), part of the targeted GHG emission reductions presumably will have to result from a switch from coal fired electricity generation to gas fired electricity generation. It is possible to calculate the allowance cost necessary to switch a certain coal fired plant with a certain gas fired plant in the merit order. The allowance cost obtained is a so called switching point. When comparing historic European Union Allowance (EUA) prices (2005) with the corresponding historic switching points, the EUA prices were found high enough to cause a certain switch in the summer season. This finding leads to the use of switching points in establishing allowance cost profiles for several scenarios. A variable gas price profile is used in the simulation tool E-Simulate to simulate electricity generation and related GHG emissions in an eight zonal model representing Western Europe. Several GHG allowance cost profile scenarios are examined. For each scenario, electricity generation in the considered countries is clarified. The focus however lies on the GHG emission reduction potentials. These potentials are addressed for each scenario

Simulation scenarios for rapid reduction in carbon dioxide emissions in the western electricity system

International Nuclear Information System (INIS)

Ford, Andrew

2008-01-01

This paper describes a computer simulation analysis of carbon dioxide emissions in the electric power system in the western United States. Legislation at both the state and federal level would impose a price on emissions via cap-and-trade in allowances for carbon dioxide emissions. The simulation scenarios for the western system indicate that dramatic reductions in emissions are possible with generating technologies that exist today. Wind and biomass generators play a key role even with conservative assumptions about their future costs. In contrast, generation from advanced technologies provide only a minor contribution by the year 2025. These scenarios provide support to those who argue that the US should move expeditiously to put a price on carbon dixoide emissions

Assessment of emission scenarios for 2030 and impacts of black carbon emission reduction measures on air quality and radiative forcing in Southeast Asia

Directory of Open Access Journals (Sweden)

D. A. Permadi

2018-03-01

Full Text Available Our previously published paper (Permadi et al. 2018 focused on the preparation of emission input data and evaluation of WRF–CHIMERE performance in 2007. This paper details the impact assessment of the future (2030 black carbon (BC emission reduction measures for Southeast Asia (SEA countries on air quality, health and BC direct radiative forcing (DRF. The business as usual (BAU2030 projected emissions from the base year of 2007 (BY2007, assuming no intervention with the linear projection of the emissions based on the past activity data for Indonesia and Thailand and the sectoral GDP growth for other countries. The RED2030 featured measures to cut down emissions in major four source sectors in Indonesia and Thailand (road transport, residential cooking, industry, biomass open burning while for other countries the Representative Concentration Pathway 8.5 (RCP8.5 emissions were assumed. WRF–CHIMERE simulated levels of aerosol species under BAU2030 and RED2030 for the modeling domain using the base year meteorology and 2030 boundary conditions from LMDZ-INCA. The extended aerosol optical depth module (AODEM calculated the total columnar AOD and BC AOD for all scenarios with an assumption on the internal mixing state. Under RED2030, the health benefits were analyzed in terms of the number of avoided premature deaths associated with ambient PM2.5 reduction along with BC DRF reduction. Under BAU2030, the average number of the premature deaths per 100 000 people in the SEA domain would increase by 30 from BY2007 while under RED2030 the premature deaths would be cut down (avoided by 63 from RED2030. In 2007, the maximum annual average BC DRF in the SEA countries was 0.98 W m−2, which would increase to 2.0 W m−2 under BAU2030 and 1.4 W m−2 under RED2030. Substantial impacts on human health and BC DRF reduction in SEA could result from the emission measures incorporated in RED2030. Future works should consider other impacts, such

Assessment of emission scenarios for 2030 and impacts of black carbon emission reduction measures on air quality and radiative forcing in Southeast Asia

Science.gov (United States)

Agustian Permadi, Didin; Oanh, Nguyen Thi Kim; Vautard, Robert

2018-03-01

Our previously published paper (Permadi et al. 2018) focused on the preparation of emission input data and evaluation of WRF-CHIMERE performance in 2007. This paper details the impact assessment of the future (2030) black carbon (BC) emission reduction measures for Southeast Asia (SEA) countries on air quality, health and BC direct radiative forcing (DRF). The business as usual (BAU2030) projected emissions from the base year of 2007 (BY2007), assuming no intervention with the linear projection of the emissions based on the past activity data for Indonesia and Thailand and the sectoral GDP growth for other countries. The RED2030 featured measures to cut down emissions in major four source sectors in Indonesia and Thailand (road transport, residential cooking, industry, biomass open burning) while for other countries the Representative Concentration Pathway 8.5 (RCP8.5) emissions were assumed. WRF-CHIMERE simulated levels of aerosol species under BAU2030 and RED2030 for the modeling domain using the base year meteorology and 2030 boundary conditions from LMDZ-INCA. The extended aerosol optical depth module (AODEM) calculated the total columnar AOD and BC AOD for all scenarios with an assumption on the internal mixing state. Under RED2030, the health benefits were analyzed in terms of the number of avoided premature deaths associated with ambient PM2.5 reduction along with BC DRF reduction. Under BAU2030, the average number of the premature deaths per 100 000 people in the SEA domain would increase by 30 from BY2007 while under RED2030 the premature deaths would be cut down (avoided) by 63 from RED2030. In 2007, the maximum annual average BC DRF in the SEA countries was 0.98 W m-2, which would increase to 2.0 W m-2 under BAU2030 and 1.4 W m-2 under RED2030. Substantial impacts on human health and BC DRF reduction in SEA could result from the emission measures incorporated in RED2030. Future works should consider other impacts, such as for agricultural crop production

Photochemical modelling of photo-oxidant levels over the Swiss plateau and emission reduction scenarios

International Nuclear Information System (INIS)

Rosselet, C.M.; Kerr, J.A.

1993-05-01

During summertime high pressure conditions, high photo-oxidant (O 3 , H 2 O 2 , PAN and others) levels are frequently observed in the planetary boundary layer in central Europe. It is well known that close to the earth's surface ozone is formed by complex reactions involving VOC, NO x , and sunlight. Substantial reductions of both precursors are needed to reduce photo-oxidant levels. In this context the reductions of the abundance of the precursors and the variation of their ratios is of great importance. Here we report model calculations from the Harwell Photochemical Trajectory Model of the levels of O 3 , H 2 O 2 and PAN along a trajectory over the Swiss Plateau from Lake Constance to Lake Geneva. These calculations are in satisfactory agreement with measurements made during the intensive observation period of the research program POLLUMET (Pollution and Meteorology in Switzerland). Sensitivity calculations of emission reduction scenarios indicate that on the Swiss Plateau the ozone production may be mainly NO x -limited; under conditions where the CO levels are closer to the upper limit within the range (120-600 ppbv). The calculated peak ozone level reduction caused by an exclusive NO x -emission reduction is about three times larger than that caused by an exclusive VOC reduction. The combined reduction of all precursor compounds is the most efficient strategy, although it is only marginally more efficient than the NO x -reduction scenario alone. (author) figs., tabs., 75 refs

Technical analysis on energy conservation and emission reduction of new energy electric vehicle in China

Science.gov (United States)

Zheng, Chaocheng

2017-10-01

With the global environmental problems and energy crisis continuously emerging, all countries are taking active measures to achieve the benign development of domestic economy and society. Vehicle, as a large oil consumption and emissions of carbon dioxide, nend to be a revolutionary change. Therefore, the development of new energy electric vehicle has become the consensus of the world. On this background, this paper has sorted out the current state and the related development planning of new energy electric vehicles in different countries to predict the car ownership of the new energy electric vehicles using elastic coefficient method and setting different path of development, conclude that under the consideration of energy conservation and emissions reduction factors, our country should mainly promote the BEV to realize the maximum energy conservation and emissions reduction.

Reductions in energy use and environmental emissions achievable with utility-based cogeneration: Simplified illustrations for Ontario

International Nuclear Information System (INIS)

Rosen, M.A.

1998-01-01

Significant reductions in energy use and environmental emissions are demonstrated to be achievable when electrical utilities use cogeneration. Simplified illustrations of these reductions are presented for the province of Ontario, based on applying cogeneration to the facilities of the main provincial electrical utility. Three cogeneration illustrations are considered: (i) fuel cogeneration is substituted for fuel electrical generation and fuel heating, (ii) nuclear cogeneration is substituted for nuclear electrical generation and fuel heating, and (iii) fuel cogeneration is substituted for fuel electrical generation and electrical heating. The substitution of cogeneration for separate electrical and heat generation processes for all illustrations considered leads to significant reductions in fuel energy consumption (24-61%), which lead to approximately proportional reductions in emissions. (Copyright (c) 1998 Elsevier Science B.V., Amsterdam. All rights reserved.)

DEMONSTRATION OF AN ADVANCED INTEGRATED CONTROL SYSTEM FOR SIMULTANEOUS EMISSIONS REDUCTION

Energy Technology Data Exchange (ETDEWEB)

Suzanne Shea; Randhir Sehgal; Ilga Celmins; Andrew Maxson

2002-02-01

The primary objective of the project titled ''Demonstration of an Advanced Integrated Control System for Simultaneous Emissions Reduction'' was to demonstrate at proof-of-concept scale the use of an online software package, the ''Plant Environmental and Cost Optimization System'' (PECOS), to optimize the operation of coal-fired power plants by economically controlling all emissions simultaneously. It combines physical models, neural networks, and fuzzy logic control to provide both optimal least-cost boiler setpoints to the boiler operators in the control room, as well as optimal coal blending recommendations designed to reduce fuel costs and fuel-related derates. The goal of the project was to demonstrate that use of PECOS would enable coal-fired power plants to make more economic use of U.S. coals while reducing emissions.

A supply chain optimization framework for CO₂ emission reduction: Case of the Netherlands

OpenAIRE

Kalyanarengan Ravi, Narayen; Zondervan, Edwin; Van Sint Annaland, Martin; Fransoo, Jan C.; Grievink, J.

2016-01-01

A major challenge for the industrial deployment of a CO2 emission reduction methodology is to reduce the overall cost and the integration of all the nodes in the supply chain for CO2 emission reduction. In this work, we develop a mixed integer linear optimization model that selects appropriate sources, capture process, transportation network and CO2 storage sites and optimize for a minimum overall cost. Initially, we screen the sources and storage options available in the Netherlands at diffe...

Achieving emissions reduction through oil sands cogeneration in Alberta’s deregulated electricity market

International Nuclear Information System (INIS)

Ouellette, A.; Rowe, A.; Sopinka, A.; Wild, P.

2014-01-01

The province of Alberta faces the challenge of balancing its commitment to reduce CO 2 emissions and the growth of its energy-intensive oil sands industry. Currently, these operations rely on the Alberta electricity system and on-site generation to satisfy their steam and electricity requirements. Most of the on-site generation units produce steam and electricity through the process of cogeneration. It is unclear to what extent new and existing operations will continue to develop cogeneration units or rely on electricity from the Alberta grid to meet their energy requirements in the near future. This study explores the potential for reductions in fuel usage and CO 2 emissions by increasing the penetration of oil sands cogeneration in the provincial generation mixture. EnergyPLAN is used to perform scenario analyses on Alberta’s electricity system in 2030 with a focus on transmission conditions to the oil sands region. The results show that up to 15–24% of CO 2 reductions prescribed by the 2008 Alberta Climate Strategy are possible. Furthermore, the policy implications of these scenarios within a deregulated market are discussed. - Highlights: • High levels of cogeneration in the oil sands significantly reduce the total fuel usage and CO 2 emissions for the province. • Beyond a certain threshold, the emissions reduction intensity per MW of cogeneration installed is reduced. • The cost difference between scenarios is not significant. • Policy which gives an advantage to a particular technology goes against the ideology of a deregulated market. • Alberta will need significant improvements to its transmission system in order for oil sands cogeneration to persist

Impacts économiques et sociaux de l'égalité des sexes dans l ...

International Development Research Centre (IDRC) Digital Library (Canada)

Impacts économiques et sociaux de l'égalité des sexes dans l'agriculture commerciale ... Partage des profits et contrôle des ressources ... Transforming Africa's agriculture sector is central to growth and poverty reduction on the continent.

A sensitivity analysis of timing and costs of greenhouse gas emission reductions

NARCIS (Netherlands)

Gerlagh, R.; van der Zwaan, B.C.C.

2004-01-01

This paper analyses the optimal timing and macro-economic costs of carbon emission reductions that mitigate the global average atmospheric temperature increase. We use a macro-economic model in which there are two competing energy sources, fossil-fuelled and non-fossil-fuelled. Technological change

Opportunities and criticisms of voluntary emission reduction projects developed by Public Administrations: Analysis of 143 case studies implemented in Italy

International Nuclear Information System (INIS)

Gallo, Michela; Del Borghi, Adriana; Strazza, Carlo; Parodi, Lara; Arcioni, Livia; Proietti, Stefania

2016-01-01

Highlights: • 143 voluntary emission reduction projects have been analysed. • The projects belong to renewable energy, energy efficiency and transport sectors. • Voluntary emission reduction standards and methodologies have been applied. • The paper identified the main criticisms for each sector. • Energy efficiency projects are the most promising for public entities. - Abstract: The United Nations Framework Convention on Climate Change (UNFCCC) sets an overall framework for intergovernmental efforts to tackle the challenge posed by climate change. Besides the “flexibility mechanisms” defined by the Kyoto Protocol to lower the overall costs of achieving their emissions targets, The Voluntary Green House Gases (GHG) reduction projects can have a lead role in GHG reduction in “non Emissions Trading System ETS sectors”. Nowadays, the voluntary market is characterised by critical aspects, such as fragmentation, lack of accounting, monitoring and validation rules that have led to the low spread of voluntary emission reduction projects developed by local authorities in the European Union despite their high potentiality. The aim of this paper is to test the applicability of voluntary emission reduction projects in the public sector following a homogeneous and consistent pattern. A research has been performed at local level on 143 voluntary emission reduction projects implemented by Public Administrations in Northern and Central Italy in renewable energy, energy efficiency and transport sectors. The applicable standards and methodologies have been checked and the case studies have been analysed though a three-step process: Preliminary additionality assessment; Projects selection; Validation of the selected project. The assessment shows that energy efficiency projects, once overcoming additionality issues, are the most promising for public entities while renewable energy and transport projects resulted to be mainly affected by double counting problems and

Atmospheric stabilization of CO2 emissions: Near-term reductions and absolute versus intensity-based targets

International Nuclear Information System (INIS)

Timilsina, Govinda R.

2008-01-01

This study analyzes CO 2 emissions reduction targets for various countries and geopolitical regions by the year 2030 to stabilize atmospheric concentrations of CO 2 at 450 ppm (550 ppm including non-CO 2 greenhouse gases) level. It also determines CO 2 intensity cuts that would be required in those countries and regions if the emission reductions were to be achieved through intensity-based targets without curtailing their expected economic growth. Considering that the stabilization of CO 2 concentrations at 450 ppm requires the global trend of CO 2 emissions to be reversed before 2030, this study develops two scenarios: reversing the global CO 2 trend in (i) 2020 and (ii) 2025. The study shows that global CO 2 emissions would be limited at 42 percent above 1990 level in 2030 if the increasing trend of global CO 2 emissions were to be reversed by 2020. If reversing the trend is delayed by 5 years, global CO 2 emissions in 2030 would be 52 percent higher than the 1990 level. The study also finds that to achieve these targets while maintaining expected economic growth, the global average CO 2 intensity would require a 68 percent drop from the 1990 level or a 60 percent drop from the 2004 level by 2030

Potential reduction of carbon dioxide emissions from the use of electric energy storage on a power generation unit/organic Rankine system

International Nuclear Information System (INIS)

Mago, Pedro J.; Luck, Rogelio

2017-01-01

Highlights: • A power generation organic Rankine cycle with electric energy storage is evaluated. • The potential carbon dioxide emissions reduction of the system is evaluated. • The system performance is evaluated for a building in different climate zones. • The system emissions and cost are compared with those of conventional systems. • Use of carbon emissions cap and trade programs on the system is evaluated. - Abstract: This paper evaluates the potential carbon dioxide emissions reduction from the implementation of electric energy storage to a combined power generation unit and an organic Rankine cycle relative to a conventional system that uses utility gas for heating and utility electricity for electricity needs. Results indicate that carbon dioxide emission reductions from the operation of the proposed system are directly correlated to the ratio of the carbon dioxide emission conversion factor for electricity to that of the fuel. The location where the system is installed also has a strong influence on the potential of the proposed system to save carbon dioxide emissions. Finally, it is shown that by using carbon emissions cap and trade programs, it is possible to establish a frame of reference to compare/exchange operational cost gains with carbon dioxide emission reductions/gains.

The cost-effectiveness of household photovoltaic systems in reducing greenhouse gas emissions in Australia: Linking subsidies with emission reductions

International Nuclear Information System (INIS)

Burtt, D.; Dargusch, P.

2015-01-01

Highlights: • Payback period for Australian household PV fell to four years in 2011 and 2012. • PV became attractive due to high feed-in tariffs and declining PV costs. • Cost was AU$200/t CO 2 e in 2010, expected to be AU$65 to AU$100/t CO 2 e by 2020. • PV resulted in greenhouse gas emissions reducing by 3.7 million t CO 2 e in 2013. • PV expected to reduce greenhouse gas emissions by 8 million t CO 2 e in 2020. - Abstract: This paper examines the cost-effectiveness of subsidies (feed-in tariffs and renewable energy credits) paid for by electricity consumers to support the uptake of roof top photovoltaic (PV) systems by households in Australia. We estimate annual payback periods, and then regress these against the actual uptake of household PV and associated emission reductions, creating a relationship not apparent in other research. Sensitivity analysis reveals that the declining cost of PV panels had most impact on PV uptake followed by feed-in tariffs, renewable energy credits and the increasing cost of household electricity tariffs. Our modelling shows that feed-in tariffs were higher than necessary to achieve the resultant levels of PV uptake and that the low cost of PV panels and comparatively high electricity tariffs are likely to result in a continuing strong uptake of household PV in Australia. Our modelling shows that subsidies peaked in 2011 and 2012, with payback periods of three to four years, having since increased to five to six years. Emission reduction costs are expected to reduce from over AU$200 per t CO 2 e in 2013 to between AU$65 and AU$100 per t CO 2 e in 2020. Household PV reduced Australia’s emissions by 3.7 million t CO 2 e in 2013 (1.7% of Australia’s total emissions) and is expected to reach eight million tonnes (3.7% of Australia’s total emissions) by 2020

The role of anthropogenic aerosol emission reduction in achieving the Paris Agreement's objective

Science.gov (United States)

Hienola, Anca; Pietikäinen, Joni-Pekka; O'Donnell, Declan; Partanen, Antti-Ilari; Korhonen, Hannele; Laaksonen, Ari

2017-04-01

The Paris agreement reached in December 2015 under the auspices of the United Nation Framework Convention on Climate Change (UNFCCC) aims at holding the global temperature increase to well below 2◦C above preindustrial levels and "to pursue efforts to limit the temperature increase to 1.5◦C above preindustrial levels". Limiting warming to any level implies that the total amount of carbon dioxide (CO2) - the dominant driver of long-term temperatures - that can ever be emitted into the atmosphere is finite. Essentially, this means that global CO2 emissions need to become net zero. CO2 is not the only pollutant causing warming, although it is the most persistent. Short-lived, non-CO2 climate forcers also must also be considered. Whereas much effort has been put into defining a threshold for temperature increase and zero net carbon emissions, surprisingly little attention has been paid to the non-CO2 climate forcers, including not just the non-CO2 greenhouse gases (methane (CH4), nitrous oxide (N2O), halocarbons etc.) but also the anthropogenic aerosols like black carbon (BC), organic carbon (OC) and sulfate. This study investigates the possibility of limiting the temperature increase to 1.5◦C by the end of the century under different future scenarios of anthropogenic aerosol emissions simulated with the very simplistic MAGICC climate carbon cycle model as well as with ECHAM6.1-HAM2.2-SALSA + UVic ESCM. The simulations include two different CO2 scenarios- RCP3PD as control and a CO2 reduction leading to 1.5◦C (which translates into reaching the net zero CO2 emissions by mid 2040s followed by negative emissions by the end of the century); each CO2 scenario includes also two aerosol pollution control cases denoted with CLE (current legislation) and MFR (maximum feasible reduction). The main result of the above scenarios is that the stronger the anthropogenic aerosol emission reduction is, the more significant the temperature increase by 2100 relative to pre

Long-term energy savings and greenhouse gas emission reductions in the Swiss residential sector

International Nuclear Information System (INIS)

Siller, Thomas; Kost, Michael; Imboden, Dieter

2007-01-01

The aim of this paper is to explore the possibilities to reach two long-term targets regarding energy consumption and greenhouse gas emissions of the Swiss residential building stock: a reduction of the final energy consumption by a factor of 3 and of CO 2 emissions by a factor of 5 until 2050. A model is constructed to describe the dynamics of the energy-relevant properties of the residential building stock. Appropriate scenarios are discussed in terms of decisions made during construction or renovation of residential buildings which affect heat demand and determine the energy carriers used for heating and hot water generation. We show that both targets could be reached, although ambitious efforts are necessary. The central element of a successful strategy is to reduce the specific heat demand of existing buildings during renovation and to substitute the heating and hot water systems by less carbon intensive ones. Our results suggest that there is more flexibility to reach the emission target than the energy reduction target

How to Achieve CO2 Emission Reduction Goals: What 'Jazz' and 'Symphony' Can Offer

International Nuclear Information System (INIS)

Rose, K.

2013-01-01

Achieving CO 2 emission reduction goals remains one of today's most challenging tasks. Global energy demand will grow for many decades to come. In many regions of the world cheap fossil fuels seem to be the way forward to meet ever growing energy demand. However, there are negative consequences to this, most notably increasing emission levels. Politicians and industry therefore must accept that make hard choices in this generation need to be made to bring about real changes for future generations and the planet to limit CO 2 emissions and climate change. In his presentation, prof. Rose will provide an insight into how CO 2 emission reduction goals can be set and achieved and how a balance between future energy needs and supply can be realised in the long run up to 2050 both globally and regionally. This will be done based on WEC's own leading analysis in this area, namely it recently launched World Energy Scenarios: composing energy futures to 2050 report and WEC's scenarios, Jazz and Symphony. WEC's full analysis, the complete report and supporting material is available online at: http://www.worldenergy.org/publications/2013/world-energy-scenarios-composing-energy-futures-to-2050.(author)

The Production, Value, and Reduction Responsibility of Carbon Emissions through Electricity Consumption of Manufacturing Industries in South Korea and Thailand

Science.gov (United States)

Kitikun, Medhawin

This dissertation provides a new method of measuring efforts by manufacturing industries to reduce their emissions by curtailing electricity consumption. Employing comprehensive firm-level data from the National Manufacture Annual Surveys of South Korea and Thailand, I construct the measure from estimates of revenue functions by industry. The data consists of firms from more than 20 industries in each year from 1982 to 2005 for Korea and from 2001 to 2008 for Thailand. With a total of more than two million observations, I estimate revenue functions for each industry and year. Here, I use three inputs: number of employees(L), fixed asset stock(K), and electricity consumption(E) and two types of functional forms to represent each industry's revenue function. Second, under market competitive condition, I find that profit maximizing firms deviated their level of electricity usage in production from the profit-maximizing level during the time period for both countries, and I develop a theoretical framework to explain this behavior. Then, I tested the theory using my empirical models. Results support the notion of a hidden environmental value expressed by firms in the form of voluntary deviations from profit-maximizing levels of input demand. The measure used is the gap between the marginal revenue product of electricity and its price. This gap should increase with income, consistent with the Environmental Kuznets Curve literature. My current model provides considerable support for this proposition. Estimates indicate, in most industries, a negative relationship between per-capita income and emissions. In the final section of the dissertation, I consider the equitable distribution of emissions reduction burden under an international agreement such as the reduction effort, Kyoto Protocol. Both developed and developing countries have to cut their emissions to a specific reduction percentage target. Domestically, I present two extreme scenarios. In the first scenario

The central importance of the EU emission trading scheme for achievement of the German climate protection target of 40% until 2020; Die zentrale Bedeutung des EU-Emissionshandels zur Erreichung des deutschen Klimaziels in Hoehe von 40 % bis 2020

Energy Technology Data Exchange (ETDEWEB)

Hermann, Hauke; Cludius, Johanna

2014-02-15

Both Germany and the European Union have set themselves targets for the reduction of greenhouse gas (GHG) emissions. The EU was the forerunner in 2008 when it adopted the Climate and Energy package and set a target of reducing GHG emissions by 20 % by 2020 compared to 1990. Two years later, Germany adopted a range of national GHG targets in the context of the German government's Energy Concept. This includes a 40% emissions reduction target to be met by 2020. One of the main instruments for achieving GHG emissions reduction targets is the EU Emissions Trading Scheme (EU ETS), which covers all large industrial and combustion installations in Europe. According to the agreement made in 2008 (Climate and Energy Package), the effort to achieve the EU's 20 % reduction target by 2020 was split between the ETS sector (2/3 of the reduction effort, representing a 21 % reduction in GHG emissions for installations covered under the ETS compared to 2005) and the non-ETS sector (1/3 of the reduction effort, representing a 10 % reduction compared to 2005). Logically, GHG emissions reductions occurring in German ETS installations count both towards the EU and the national target. This research project has been commissioned to analyse whether the ETS in its cur-rent design can contribute its fair share in efforts to meet the national emissions reduc-tion target. This question is particularly relevant in light of the following considerations: - The new German Coalition Agreement, signed in December 2013, reiterated the national target of a 40 % reduction of GHG emissions by 2020 compared to 1990 levels. - At the same time, the new Coalition Agreement stated that changes to the ETS are only to be considered if the EU GHG emissions reduction target will not be met. - There is a surplus of CO2 allowances on the ETS market, which undermines the credibility of the instrument as well as the integrity of the emissions reduction tar-gets (both European and national). At the same

Assessing "dangerous climate change": required reduction of carbon emissions to protect young people, future generations and nature.

Directory of Open Access Journals (Sweden)

James Hansen

Full Text Available We assess climate impacts of global warming using ongoing observations and paleoclimate data. We use Earth's measured energy imbalance, paleoclimate data, and simple representations of the global carbon cycle and temperature to define emission reductions needed to stabilize climate and avoid potentially disastrous impacts on today's young people, future generations, and nature. A cumulative industrial-era limit of ∼500 GtC fossil fuel emissions and 100 GtC storage in the biosphere and soil would keep climate close to the Holocene range to which humanity and other species are adapted. Cumulative emissions of ∼1000 GtC, sometimes associated with 2°C global warming, would spur "slow" feedbacks and eventual warming of 3-4°C with disastrous consequences. Rapid emissions reduction is required to restore Earth's energy balance and avoid ocean heat uptake that would practically guarantee irreversible effects. Continuation of high fossil fuel emissions, given current knowledge of the consequences, would be an act of extraordinary witting intergenerational injustice. Responsible policymaking requires a rising price on carbon emissions that would preclude emissions from most remaining coal and unconventional fossil fuels and phase down emissions from conventional fossil fuels.

Assessing "dangerous climate change": required reduction of carbon emissions to protect young people, future generations and nature.

Science.gov (United States)

Hansen, James; Kharecha, Pushker; Sato, Makiko; Masson-Delmotte, Valerie; Ackerman, Frank; Beerling, David J; Hearty, Paul J; Hoegh-Guldberg, Ove; Hsu, Shi-Ling; Parmesan, Camille; Rockstrom, Johan; Rohling, Eelco J; Sachs, Jeffrey; Smith, Pete; Steffen, Konrad; Van Susteren, Lise; von Schuckmann, Karina; Zachos, James C

2013-01-01

We assess climate impacts of global warming using ongoing observations and paleoclimate data. We use Earth's measured energy imbalance, paleoclimate data, and simple representations of the global carbon cycle and temperature to define emission reductions needed to stabilize climate and avoid potentially disastrous impacts on today's young people, future generations, and nature. A cumulative industrial-era limit of ∼500 GtC fossil fuel emissions and 100 GtC storage in the biosphere and soil would keep climate close to the Holocene range to which humanity and other species are adapted. Cumulative emissions of ∼1000 GtC, sometimes associated with 2°C global warming, would spur "slow" feedbacks and eventual warming of 3-4°C with disastrous consequences. Rapid emissions reduction is required to restore Earth's energy balance and avoid ocean heat uptake that would practically guarantee irreversible effects. Continuation of high fossil fuel emissions, given current knowledge of the consequences, would be an act of extraordinary witting intergenerational injustice. Responsible policymaking requires a rising price on carbon emissions that would preclude emissions from most remaining coal and unconventional fossil fuels and phase down emissions from conventional fossil fuels.

Assessing 'Dangerous Climate Change': Required Reduction of Carbon Emissions to Protect Young People, Future Generations and Nature

Science.gov (United States)

Hansen, James; Kharecha, Pushker; Sato, Makiko; Masson-Demotte, Valerie; Ackerman, Frank; Beerling, David J.; Hearty, Paul J.; Hoegh-Guldberg, Ove; Hsu, Shi-Ling; Parmesan, Camille;

Reduction of NOx emissions when burning low heating value gas

International Nuclear Information System (INIS)

Gustafsson, R.; Oskarsson, J.; Waldheim, L.

1993-09-01

On the gasification of nitrogen-rich fuel the nitrogen from the fuel goes into the gas phase in the form of ammonia and hydrogen cyanide and also nitrogen containing tars. When the gas is combusted the nitrogen compounds are oxidized to a great extent to NO x and, therefore, high NO x emissions can be found on the combustion of low heating value gas produced from energy forest wood chips as is also the case with direct combustion of nitrogen rich fuels. An experimental study has been carried out where the important parameters for designing a combustion chamber for low heating value gases have been studied in order to obtain maximum reduction of NO x emissions. The effect of tar cracking using dolomite on these emissions and the effect of parameters such as the addition of steam has also been tested. The tests were carried out with energy forest wood chips with 0.3% nitrogen. The gasification was carried out in a pyrolysis reactor, operated to yield a low heating value gas, and which was coupled to a simplified gas turbine combustion chamber at atmospheric pressure. The results show that the main part of the nitrogen in the fuel is found as ammonia in the low heating value gas. With this type of gasification the conversion of fuel nitrogen to ammonia in the gas is equivalent to 500-600 mg/MJ, calculated as NO 2 . Only very low amounts of hydrogen cyanide have been noted and no nitrogen containing tar components have been found. No apparent effect of steam additions has been noted. On the other hand the distribution of air in the combustion chamber and residence time during the under stoichiometric conditions are of great importance for the NO x reduction. Depending on the air distribution the emissions of NO 2 varied between 100 and 250 mg/MJ, calculated as NO 2 . 23 refs, 11 figs, 2 tabs

Consumer-supplier-government triangular relations: Rethinking the UK policy path for carbon emissions reduction from the UK residential sector

International Nuclear Information System (INIS)

Parag, Yael; Darby, Sarah

2009-01-01

The UK residential (household) sector is responsible for approximately 30% of total carbon dioxide emissions and is often seen as the most promising in terms of early reductions. As most direct household emissions come from only two fuel sources, this paper critically examines how existing emissions reduction policies for the sector shape - and are shaped by - relations between the three main groups of actor in this policy domain: central government, gas and electricity suppliers, and energy users. Focusing on relations between three dyads (government-suppliers, suppliers-consumers and consumers-government) enables us to examine aspects of demand reduction that have often been overlooked to date. By 'relations' we refer to services, power relationships and flows of capital and information, as well as less easily defined elements such as loyalty, trust and accountability. The paper argues that the chosen government policy path to deliver demand reduction, which heavily emphasises the suppliers' role, suffers from principal-agent problems, fails to align consumers and supplier interests toward emissions reduction, and does not yet portray a lower-carbon future in positive terms. It suggests that more attention should be paid to government-consumer relations, recognising that energy consumers are also citizens.

Diesel Engine Emission Reduction Using Catalytic Nanoparticles: An Experimental Investigation

Directory of Open Access Journals (Sweden)

Ajin C. Sajeevan

2013-01-01

Full Text Available Cerium oxide being a rare earth metal with dual valance state existence has exceptional catalytic activity due to its oxygen buffering capability, especially in the nanosized form. Hence when used as an additive in the diesel fuel it leads to simultaneous reduction and oxidation of nitrogen dioxide and hydrocarbon emissions, respectively, from diesel engine. The present work investigates the effect of cerium oxide nanoparticles on performance and emissions of diesel engine. Cerium oxide nanoparticles were synthesized by chemical method and techniques such as TEM, EDS, and XRD have been used for the characterization. Cerium oxide was mixed in diesel by means of standard ultrasonic shaker to obtain stable suspension, in a two-step process. The influence of nanoparticles on various physicochemical properties of diesel fuel has also been investigated through extensive experimentation by means of ASTM standard testing methods. Load test was done in the diesel engine to investigate the effect of nanoparticles on the efficiency and the emissions from the engine. Comparisons of fuel properties with and without additives are also presented.

Climate change and WTO : boundary mediation on certified emission reductions

International Nuclear Information System (INIS)

Kim, Ho Cheol

2011-07-01

This book mentions climate change and WTO with is climate change true? International effort for reduce of greenhouse gas with UNFCCC, Kyoto protocol, Copenhagen Accord and Cancun Agreement, WTO norm, discussion on introduction of boundary mediation on certified emission reductions, analysis on regulation related WTO norm, violation of regulation on border measure of prohibition, violation of principle on GATT, justification, except through Article 20 of GATT, assessment of policy and supplementation on the law.

Emissions of CO2 from road freight transport in London: Trends and policies for long run reductions

International Nuclear Information System (INIS)

Zanni, Alberto M.; Bristow, Abigail L.

2010-01-01

Freight transport has been receiving increasing attention in both literature and practice following the growing recognition of its importance in urban transport planning. This paper analyses historical and projected road freight CO 2 emissions in the city of London and explores the potential mitigation effect of a set of freight transport policies and logistics solutions. Findings indicate a range of policies with potential to reduce emissions in the period up to 2050. However, this reduction would appear to only be capable of partly counterbalancing the projected increase in freight traffic. More profound behavioural measures therefore appear to be necessary for London's CO 2 emissions reduction targets to be met.

Reduction of SO sub 2 emission from a fluidized-bed under staged combustion by coarse limestone

International Nuclear Information System (INIS)

Khan, W.Z.; Gibbbs, B.M.

1998-01-01

A study was performed to investigate the effect of course limestone on the reduction of SO sub 2 emission from a fluidized-bed under staged combustion. The limestone of 1.2-2.5 mm size was premixed with fine coal of 1-3 mm size and fed under bed. The staging levels, bed height, and Ca/S ratio was fixed at 70:30, 30 cm and 3:1, respectively. A maximum of around 50% reduction in SO sub 2 emissions was achieved at both excess air of 20 and 40% and at 830 deg. C. bed temperature. The SO sub 2 emissions were very sensitive to bed temperature. The course limestone was found better in desulfurization efficiency at lower temperature than fine limestone. (author)

A guide for implementation of the European Pollutant Emission Register (EPER) in Germany; Leitfaden zur Umsetzung des Europaeischen Schadstoffemissionsregisters (EPER) in Deutschland

Energy Technology Data Exchange (ETDEWEB)

Kuehne, C.; Striegel, G.

2001-10-01

The report presents specifications for implementing the European Pollutant Emission Register (EPER) in Germany. [German] Gemaess Artikel 15 (3) der Richtlinie 96/61/EG ueber die integrierte Vermeidung und Verminderung der Umweltverschmutzung ('IVU-Richtlinie') veroeffentlicht die Kommission alle drei Jahre ein Verzeichnis der wichtigsten Emissionen und ihrer Quellen anhand der von den Mitgliedstaaten uebermittelten Informationen. Fuer die Mitgliedstaaten ergibt sich hieraus die Verpflichtung, die erforderlichen Daten zu erheben, auszuwerten und der Europaeischen Kommission zu berichten. In der Entscheidung der Kommission vom 17. Juli 2000 ueber den Aufbau eines Europaeischen Schadstoffemissionsregisters (EPER- 'European Pollutant Emission Register') 2000/479/EG ('EPER-Entscheidung') werden die Anforderungen an Inhalt und Form dieses Verzeichnisses konkretisiert: - Die Mitgliedstaaten berichten der Kommission ueber die Emissionen in die Luft und in das Wasser aus einzelnen Betriebseinrichtungen. Zu berichten sind die Emissionen bestimmter Schadstoffe, die ueber vorgegebenen Schwellenwerten liegen. Das Berichtsformat fuer die Mitgliedstaaten ist im Anhang A2 der EPER-Entscheidung festgelegt. - Der erste Bericht ist im Juni 2003 vorzulegen und soll Angaben ueber Emissionen im Jahr 2001 (bzw. wahlweise 2000 oder 2002) enthalten. Jeder Mitgliedstaat muss zudem einen zusammenfassenden nationalen Uebersichtsbericht erstellen. - Die Europaeische Kommission wird die Emissionsdaten ueber das Internet der Oeffentlichkeit zugaenglich machen. Fuer die Erhebung der fuer das EPER erforderlichen Daten in Deutschland wird ein schrittweises Vorgehen empfohlen: - Am Anfang steht die Identifizierung von Betriebseinrichtungen mit Taetigkeiten nach Anhang I der IVU-Richtlinie. - Angabe des NACE-Kodes der Betriebseinrichtung und Zuordnung der Anhang I-Taetigkeiten (Quellenkategorie) und des NOSE-P-Kodes gemaess Anhang A3 der EPER-Entscheidung. - Festlegung

Optimization of Power Generation Rights Under the Requirements of Energy Conservation and Emission Reduction

Science.gov (United States)

Hu-ping, YANY; Chong-wei, ZHONG; Fei-fei, YAN; Cheng-yi, TANG

2018-03-01

In recent years, the energy crisis and greenhouse effect problem have caused wide public concern, if these issues cannot be resolved quickly, they will bring troubles to people’s lives.In response, many countries around the world have implemented policies to reduce energy consumption and greenhouse gas emissions. In our country, the electric power industry has made great contribution to the daily life of people and the development of industry, but it is also an industry of high consumption and high emission.In order to realize the sustainable development of society, it is necessary to make energy conservation and emission reduction in the power industry as an important part of the realization of this goal.In this context, power generation trade has become a hot topic in energy conservation and emission reduction.Through the electricity consumption of the units with different power efficiency and coal consumption rate,it can achieve the target of reducing coal consumption, reducing network loss, reducing greenhouse gas emission, and increasing social benefit,and so on. This article put forward a optimal energy model on the basis of guaranteeing safety and environmental protection.In this paper, they used the IEEE30, IEEE39, IEEE57 and IEEE118 node system as an example, and set up the control groups to prove the practicality of the presented model.The solving method of this model was interior-point method.

Energy-Efficiency and Air-Pollutant Emissions-Reduction Opportunities for the Ammonia Industry in China

Energy Technology Data Exchange (ETDEWEB)

Ma, Ding [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hasanbeigi, Ali [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Chen, Wenying [Tsinghua Univ., Beijing (China)

2015-06-01

As one of the most energy-intensive and polluting industries, ammonia production is responsible for significant carbon dioxide (CO₂) and air-pollutant emissions. Although many energy-efficiency measures have been proposed by the Chinese government to mitigate greenhouse gas emissions and improve air quality, lack of understanding of the cost-effectiveness of such improvements has been a barrier to implementing these measures. Assessing the costs, benefits, and cost-effectiveness of different energy-efficiency measures is essential to advancing this understanding. In this study, a bottom-up energy conservation supply curve model is developed to estimate the potential for energy savings and emissions reductions from 26 energy-efficiency measures that could be applied in China’s ammonia industry. Cost-effective implementation of these measures saves a potential 271.5 petajoules/year for fuel and 5,443 gigawatt-hours/year for electricity, equal to 14% of fuel and 14% of electricity consumed in China’s ammonia industry in 2012. These reductions could mitigate 26.7 million tonnes of CO₂ emissions. This study also quantifies the co-benefits of reducing air-pollutant emissions and water use that would result from saving energy in China’s ammonia industry. This quantitative analysis advances our understanding of the cost-effectiveness of energy-efficiency measures and can be used to augment efforts to reduce energy use and environmental impacts.

Carbon Emission Reduction with Capital Constraint under Greening Financing and Cost Sharing Contract.

Science.gov (United States)

Qin, Juanjuan; Zhao, Yuhui; Xia, Liangjie

2018-04-13

Motivated by the industrial practices, this work explores the carbon emission reductions for the manufacturer, while taking into account the capital constraint and the cap-and-trade regulation. To alleviate the capital constraint, two contracts are analyzed: greening financing and cost sharing. We use the Stackelberg game to model four cases as follows: (1) in Case A1, the manufacturer has no greening financing and no cost sharing; (2) in Case A2, the manufacturer has greening financing, but no cost sharing; (3) in Case B1, the manufacturer has no greening financing but has cost sharing; and, (4) in Case B2, the manufacturer has greening financing and cost sharing. Then, using the backward induction method, we derive and compare the equilibrium decisions and profits of the participants in the four cases. We find that the interest rate of green finance does not always negatively affect the carbon emission reduction of the manufacturer. Meanwhile, the cost sharing from the retailer does not always positively affect the carbon emission reduction of the manufacturer. When the cost sharing is low, both of the participants' profits in Case B1 (under no greening finance) are not less than that in Case B2 (under greening finance). When the cost sharing is high, both of the participants' profits in Case B1 (under no greening finance) are less than that in Case B2 (under greening finance).

Carbon Emission Reduction with Capital Constraint under Greening Financing and Cost Sharing Contract

Science.gov (United States)

Qin, Juanjuan; Zhao, Yuhui; Xia, Liangjie

2018-01-01

Motivated by the industrial practices, this work explores the carbon emission reductions for the manufacturer, while taking into account the capital constraint and the cap-and-trade regulation. To alleviate the capital constraint, two contracts are analyzed: greening financing and cost sharing. We use the Stackelberg game to model four cases as follows: (1) in Case A1, the manufacturer has no greening financing and no cost sharing; (2) in Case A2, the manufacturer has greening financing, but no cost sharing; (3) in Case B1, the manufacturer has no greening financing but has cost sharing; and, (4) in Case B2, the manufacturer has greening financing and cost sharing. Then, using the backward induction method, we derive and compare the equilibrium decisions and profits of the participants in the four cases. We find that the interest rate of green finance does not always negatively affect the carbon emission reduction of the manufacturer. Meanwhile, the cost sharing from the retailer does not always positively affect the carbon emission reduction of the manufacturer. When the cost sharing is low, both of the participants’ profits in Case B1 (under no greening finance) are not less than that in Case B2 (under greening finance). When the cost sharing is high, both of the participants’ profits in Case B1 (under no greening finance) are less than that in Case B2 (under greening finance). PMID:29652859

Wind Energy and Air Emission Reduction Benefits: A Primer

Energy Technology Data Exchange (ETDEWEB)

Jacobson, D.; High, C.

2008-02-01

This document provides a summary of the impact of wind energy development on various air pollutants for a general audience. The core document addresses the key facts relating to the analysis of emission reductions from wind energy development. It is intended for use by a wide variety of parties with an interest in this issue, ranging from state environmental officials to renewable energy stakeholders. The appendices provide basic background information for the general reader, as well as detailed information for those seeking a more in-depth discussion of various topics.

Is the Clean Development Mechanism Effective for Emission Reductions?

DEFF Research Database (Denmark)

Tarp, Finn; Huang, Yongfu; He, Jingjing

2014-01-01

with great challenges, given the wide divide between developed and developing nations. Against this background, comprehensive evaluations of the effectiveness of Kyoto market‐based mechanisms such as the Clean Development Mechanism (CDM) in terms of mitigating human‐induced climate change are urgently needed...... reductions for 60 CDM host countries over the period 2005–2010, using a newly developed econometric method for dynamic panel data models associated with the X‐differencing procedure. Our results provide evidence in support of a decline in CO 2 emissions in CDM host countries. We conclude...

CO_2 emissions reduction of Chinese light manufacturing industries: A novel RAM-based global Malmquist–Luenberger productivity index

International Nuclear Information System (INIS)

Emrouznejad, Ali; Yang, Guo-liang

2016-01-01

Climate change has become one of the most challenging issues facing the world. Chinese government has realized the importance of energy conservation and prevention of the climate changes for sustainable development of China's economy and set targets for CO_2 emissions reduction in China. In China industry contributes 84.2% of the total CO_2 emissions, especially manufacturing industries. Data envelopment analysis (DEA) and Malmquist productivity (MP) index are the widely used mathematical techniques to address the relative efficiency and productivity of a group of homogenous decision making units, e.g. industries or countries. However, in many real applications, especially those related to energy efficiency, there are often undesirable outputs, e.g. the pollutions, waste and CO_2 emissions, which are produced inevitably with desirable outputs in the production. This paper introduces a novel Malmquist–Luenberger productivity (MLP) index based on directional distance function (DDF) to address the issue of productivity evolution of DMUs in the presence of undesirable outputs. The new RAM (Range-adjusted measure)-based global MLP index has been applied to evaluate CO_2 emissions reduction in Chinese light manufacturing industries. Recommendations for policy makers have been discussed. - Highlights: •CO_2 emissions reduction in Chinese light manufacturing industries are measured. •A novel RAM based Malmquist–Luenberger productivity index has been developed. •Recommendation to policy makers for reducing CO_2 reduction in China are given.

Carbon dioxide emissions reduction in China's transport sector: A dynamic VAR (vector autoregression) approach

International Nuclear Information System (INIS)

Xu, Bin; Lin, Boqiang

2015-01-01

Energy saving and carbon dioxide emission reduction in China is attracting increasing attention worldwide. At present, China is in the phase of rapid urbanization and industrialization, which is characterized by rapid growth of energy consumption. China's transport sector is highly energy-consuming and pollution-intensive. Between 1980 and 2012, the carbon dioxide emissions in China's transport sector increased approximately 9.7 times, with an average annual growth rate of 7.4%. Identifying the driving forces of the increase in carbon dioxide emissions in the transport sector is vital to developing effective environmental policies. This study uses Vector Autoregressive model to analyze the influencing factors of the changes in carbon dioxide emissions in the sector. The results show that energy efficiency plays a dominant role in reducing carbon dioxide emissions. Private vehicles have more impact on emission reduction than cargo turnover due to the surge in private car population and its low energy efficiency. Urbanization also has significant effect on carbon dioxide emissions because of large-scale population movements and the transformation of the industrial structure. These findings are important for the relevant authorities in China in developing appropriate energy policy and planning for the transport sector. - Highlights: • The driving forces of CO 2 emissions in China's transport sector were investigated. • Energy efficiency plays a dominant role in reducing carbon dioxide emissions. • Urbanization has significant effect on CO 2 emissions due to large-scale migration. • The role of private cars in reducing emissions is more important than cargo turnover

Integration of Energy Consumption and CO2 Emissions into the DES Tool with Lean Thinking

Science.gov (United States)

Nujoom, Reda; Wang, Qian

2018-01-01

Products are often made by accomplishing a number of manufacturing processes on a sequential flow line which is also known as manufacturing systems. In a traditional way, design or evaluation of a manufacturing system involves a determination or an analysis of the system performance by adjusting system parameters relating to such as system capacity, material processing time, material-handling and transportation and shop-floor layout. Environment related parameters, however, are not considered or considered as separate issues. In the past decade, there has been a growing concern about the environmental protection and governments almost in all over the world enforced certain rules and regulation to promote energy saving and reduce carbon dioxide (CO2) emissions in manufacturing industry. To date, development of a sustainable manufacturing system requires designers who need not merely to apply traditional methods of improving system efficiency and productivity but also examine the environmental issues in production of the developed manufacturing system. Most researchers, however, focused on operational systems, which do not incorporate the effect of environmental factors that may also affect the system performance. This paper presents a research work aiming to addresses these issues in design and evaluation of sustainable manufacturing systems incorporating parameters of energy consumption and CO2 emissions into a DES (discrete event simulation) tool.

Reduction in Greenhouse Gas Emissions Associated with Worm Control in Lambs

Directory of Open Access Journals (Sweden)

Drew G. Coulter

2013-04-01

Full Text Available There are currently little or no data on the role of endemic disease control in reducing greenhouse gas (GHG emissions from livestock. In the present study, we have used an Intergovernmental Panel on Climate Change (IPCC-compliant model to calculate GHG emissions from naturally grazing lambs under four different anthelmintic drug treatment regimes over a 5-year study period. Treatments were either “monthly” (NST, “strategic” (SPT, “targeted” (TST or based on “clinical signs” (MT. Commercial sheep farming practices were simulated, with lambs reaching a pre-selected target market weight (38 kg removed from the analysis as they would no longer contribute to the GHG budget of the flock. Results showed there was a significant treatment effect over all years, with lambs in the MT group consistently taking longer to reach market weight, and an extra 10% emission of CO2e per kg of weight gain over the other treatments. There were no significant differences between the other three treatment strategies (NST, SPT and TST in terms of production efficiency or cumulated GHG emissions over the experimental period. This study has shown that endemic disease control can contribute to a reduction in GHG emissions from animal agriculture and help reduce the carbon footprint of livestock farming.

Developments in greenhouse gas emissions and net energy use in Danish agriculture - How to achieve substantial CO2 reductions?

International Nuclear Information System (INIS)

Dalgaard, T.; Olesen, J.E.; Petersen, S.O.; Petersen, B.M.; Jorgensen, U.; Kristensen, T.; Hutchings, N.J.; Gyldenkaerne, S.; Hermansen, J.E.

2011-01-01

Greenhouse gas (GHG) emissions from agriculture are a significant contributor to total Danish emissions. Consequently, much effort is currently given to the exploration of potential strategies to reduce agricultural emissions. This paper presents results from a study estimating agricultural GHG emissions in the form of methane, nitrous oxide and carbon dioxide (including carbon sources and sinks, and the impact of energy consumption/bioenergy production) from Danish agriculture in the years 1990-2010. An analysis of possible measures to reduce the GHG emissions indicated that a 50-70% reduction of agricultural emissions by 2050 relative to 1990 is achievable, including mitigation measures in relation to the handling of manure and fertilisers, optimization of animal feeding, cropping practices, and land use changes with more organic farming, afforestation and energy crops. In addition, the bioenergy production may be increased significantly without reducing the food production, whereby Danish agriculture could achieve a positive energy balance. - Highlights: → GHG emissions from Danish agriculture 1990-2010 are calculated, including carbon sequestration. → Effects of measures to further reduce GHG emissions are listed. → Land use scenarios for a substantially reduced GHG emission by 2050 are presented. → A 50-70% reduction of agricultural emissions by 2050 relative to 1990 is achievable. → Via bioenergy production Danish agriculture could achieve a positive energy balance. - Scenario studies of greenhouse gas mitigation measures illustrate the possible realization of CO 2 reductions for Danish agriculture by 2050, sustaining current food production.

A review on idling reduction strategies to improve fuel economy and reduce exhaust emissions of transport vehicles

International Nuclear Information System (INIS)

Shancita, I.; Masjuki, H.H.; Kalam, M.A.; Rizwanul Fattah, I.M.; Rashed, M.M.; Rashedul, H.K.

2014-01-01

Highlights: • Introduce various idling reduction technologies for transport vehicles. • Exhibit their energy use, advantages, disadvantages to understand their capability. • Conduct critical review to improve fuel economy and exhaust emissions. • Suggest better technology according to their performance ability. - Abstract: To achieve reductions in vehicle idling, strategies and actions must be taken to minimize the time spent by drivers idling their engines. A number of benefits can be obtained in limiting the idling time. These benefits include savings in fuel use and maintenance costs, vehicle life extension, and reduction in exhaust emissions. The main objective of idling reduction (IR) devices is to reduce the amount of energy wasted by idling trucks, rail locomotives, and automobiles. During idling, gasoline vehicles emit a minimum amount of nitrogen oxides (NO x ) and negligible particulate matter (PM). However, generally a large amount of carbon monoxide (CO) and hydrocarbons (HC) are produced from these vehicles. Gasoline vehicles consume far more fuel at an hourly rate than their diesel counterparts during idling. Higher NOx and comparatively larger PM are produced by diesel vehicles than gasoline vehicles on the average during idling. Auxiliary power unit (APU), direct-fired heaters, fuel cells, thermal storage system, truck stop electrification, battery-based systems, engine idle management (shutdown) systems, electrical (shore power) solutions, cab comfort system, and hybridization are some of the available IR technologies whose performances for reducing fuel consumption and exhaust emissions have been compared. This paper analyzes the availability and capability of most efficient technologies to reduce fuel consumption and exhaust emissions from diesel and gasoline vehicles by comparing the findings of previous studies. The analysis reveals that among all the options direct fired heaters, APUs and electrified parking spaces exhibit better

Reduction of greenhouse gas emissions in the rape cultivation with special consideration of nitrogen fertilization; Minderung von Treibhausgasemissionen im Rapsanbau unter besonderer Beruecksichtigung der Stickstoffduengung

Energy Technology Data Exchange (ETDEWEB)

Heilmann, Hubert [Landesforschungsanstalt fuer Landwirtschaft und Fischerei Mecklenburg-Vorpommern, Guelzow-Pruezen (Germany). Inst. fuer Pflanzenproduktion und Betriebswirtschaft; Riemer, Doerte

2017-08-01

Involved into the research project ''Mitigation of greenhouse gas emissions in oilseed rape cropping with special consideration of nitrogen fertilizing'' regional specific GHG cropping emissions according to benchmark and regional experts are calculated by using a calculation method developed in cooperation with IFEU and according to IPCC (2006). The following results are achieved for 35 German NUTS2-regions: - nitrogen fertilization is the main influence for GHG emission reduction; - the use of low-emission nitrogen fertilizers is worth for GHG emission reduction; - without increasing the nutrient efficiency of organic fertilizers, GHG emission reductions are difficult to achieve in many regions; - GHG emission reduction/climate protection and realization of the WRRL or N-Saldo reduction come up to the same aim; - economic consequences of restrictive carbon mitigation can be compensated by slight price surcharges for certified raw material.

No-lose targets as an option to integrate non-Annex I countries in global emission reduction efforts. A game-theoretical analysis

Energy Technology Data Exchange (ETDEWEB)

Duscha, Vicki

2012-07-01

Substantial greenhouse gas emission reductions of 50% and more below 1990 levels by 2050 are necessary, to limit mean temperature increase below 2 C above pre-industrial levels. While the Kyoto Protocol foresees emission reduction targets for Annex I countries only, current and projected greenhouse gas emissions, as well as the growing economic importance of emerging economies call for an integration of non-Annex I countries in global reduction efforts. No-lose targets set emission reduction targets and define incentives for meeting the target, in contrast to binding reduction targets that use penalties to ensure compliance. One form of incentive is the participation in an international emissions trading market. While a few conceptual and quantitative analyses of no-lose targets can be found in the literature, economic analyses have not been carried out so far. In this thesis, two theoretical frameworks are introduced to analyze the potential of no-lose targets to contribute to global emission reduction efforts. First, a two-player, two-stage model is developed to model a non-Annex I country's participation decision and derive the contribution to global emission reductions. Then a two-player participation game is introduced to analyze the effects that the participation decision of one non-Annex I country has on another non-Annex I country also facing a no-lose target. Two market forms, a perfectly competitive market, and a market with market power on the side of the non-Annex I country are analyzed. In order to complement the highly stylized theoretical frameworks, a quantitative analysis applying marginal abatement cost curves is conducted to estimate the contribution of no-lose targets to reaching the 2 C target. The analyses show that no-lose targets can result in substantial contributions from non-Annex I countries to global emission reductions, in particular if the reduction potential in the non-Annex I countries is large, compared to that of the Annex I

The impacts of electricity dispatch protocols on the emission reductions due to wind power and carbon tax.

Science.gov (United States)

Yu, Yang; Rajagopal, Ram

2015-02-17

Two dispatch protocols have been adopted by electricity markets to deal with the uncertainty of wind power but the effects of the selection between the dispatch protocols have not been comprehensively analyzed. We establish a framework to compare the impacts of adopting different dispatch protocols on the efficacy of using wind power and implementing a carbon tax to reduce emissions. We suggest that a market has high potential to achieve greater emission reduction by adopting the stochastic dispatch protocol instead of the static protocol when the wind energy in the market is highly uncertain or the market has enough adjustable generators, such as gas-fired combustion generators. Furthermore, the carbon-tax policy is more cost-efficient for reducing CO2 emission when the market operates according to the stochastic protocol rather than the static protocol. An empirical study, which is calibrated according to the data from the Electric Reliability Council of Texas market, confirms that using wind energy in the Texas market results in a 12% CO2 emission reduction when the market uses the stochastic dispatch protocol instead of the 8% emission reduction associated with the static protocol. In addition, if a 6$/ton carbon tax is implemented in the Texas market operated according to the stochastic protocol, the CO2 emission is similar to the emission level from the same market with a 16$/ton carbon tax operated according to the static protocol. Correspondingly, the 16$/ton carbon tax associated with the static protocol costs 42.6% more than the 6$/ton carbon tax associated with the stochastic protocol.

Study on emission characteristics and reduction strategy of nitrous oxide during wastewater treatment by different processes.

Science.gov (United States)

Sun, Shichang; Bao, Zhiyuan; Sun, Dezhi

2015-03-01

Given the inexorable increase in global wastewater treatment, increasing amounts of nitrous oxide are expected to be emitted from wastewater treatment plants and released to the atmosphere. It has become imperative to study the emission and control of nitrous oxide in the various wastewater treatment processes currently in use. In the present investigation, the emission characteristics and the factors affecting the release of nitrous oxide were studied via full- and pilot-scale experiments in anoxic-oxic, sequencing batch reactor and oxidation ditch processes. We propose an optimal treatment process and relative strategy for nitrous oxide reduction. Our results show that both the bio-nitrifying and bio-denitrifying treatment units in wastewater treatment plants are the predominant sites for nitrous oxide production in each process, while the aerated treatment units are the critical sources for nitrous oxide emission. Compared with the emission of nitrous oxide from the anoxic-oxic (1.37% of N-influent) and sequencing batch reactor (2.69% of N-influent) processes, much less nitrous oxide (0.25% of N-influent) is emitted from the oxidation ditch process, which we determined as the optimal wastewater treatment process for nitrous oxide reduction, given the current technologies. Nitrous oxide emissions differed with various operating parameters. Controlling the dissolved oxygen concentration at a proper level during nitrification and denitrification and enhancing the utilization rate of organic carbon in the influent for denitrification are the two critical methods for nitrous oxide reduction in the various processes considered.

Inventories and reduction scenarios of urban waste-related greenhouse gas emissions for management potential.

Science.gov (United States)

Yang, Dewei; Xu, Lingxing; Gao, Xueli; Guo, Qinghai; Huang, Ning

2018-06-01

Waste-related greenhouse gas (GHG) emissions have been recognized as one of the prominent contributors to global warming. Current urban waste regulations, however, face increasing challenges from stakeholders' trade-offs and hierarchic management. A combined method, i.e., life cycle inventories and scenario analysis, was employed to investigate waste-related GHG emissions during 1995-2015 and to project future scenarios of waste-driven carbon emissions by 2050 in a pilot low carbon city, Xiamen, China. The process-based carbon analysis of waste generation (prevention and separation), transportation (collection and transfer) and disposal (treatment and recycling) shows that the main contributors of carbon emissions are associated with waste disposal processes, solid waste, the municipal sector and Xiamen Mainland. Significant spatial differences of waste-related CO 2e emissions were observed between Xiamen Island and Xiamen Mainland using the carbon intensity and density indexes. An uptrend of waste-related CO 2e emissions from 2015 to 2050 is identified in the business as usual, waste disposal optimization, waste reduction and the integrated scenario, with mean annual growth rates of 8.86%, 8.42%, 6.90% and 6.61%, respectively. The scenario and sensitivity analysis imply that effective waste-related carbon reduction requires trade-offs among alternative strategies, actions and stakeholders in a feasible plan, and emphasize a priority of waste prevention and collection in Xiamen. Our results could benefit to the future modeling of urban multiple wastes and life-cycle carbon control in similar cities within and beyond China. Copyright © 2018 Elsevier B.V. All rights reserved.

The research and application of electricity economic boom model under the constraint of energy conservation and emission reduction

Science.gov (United States)

Chen, Guangyan; Xia, Huaijian; Chen, Meiling; Wang, Dong; Jia, Sujin

2017-10-01

Energy saving and emission reduction policies affects the development of high power industry, thereby affecting electricity demand, so the study of the electricity industry boom helps to master the national economy. This paper analyses the influence of energy saving and emission reduction on power generation structure and pollutant emission in power industry. Through the construction of electricity market composite boom index to indicate electricity boom, using boom index to study volatility characteristics and trend of electricity market. Here we provide a method for the enterprise and the government, that it can infer the overall operation of the national economy situation from power data.

Technologies for the Reduction of Nitrogen Oxides Emissions

Directory of Open Access Journals (Sweden)

Paulica Arsenie

2015-06-01

Full Text Available When it comes to gas turbines, their main problem concerning pollutant emissions is represented by nitric oxides. Among other emissions, sulphur oxides being much reduced due to the use of liquid distilled and gas fuels with a low content of sulphur. Using water or steam injection became the favourite method during the '80s and especially the '90s since "dry" methods and catalytic reduction were both at the beginning of the development phase. Catalytic convertors have been used since the '80s and they are still used although the costs of renewing the catalyst are very high. In the last twenty years a gradual decrease has been registered on the limits of nitric oxides from 75 ppm to 25 ppm, and now the target is oriented towards the 9 ppm level. The evolution of burning technologies of combustion makes it possible to control the level of production of nitric oxides even from the source without being necessary to use "humid" methods. This, of course, opened the market for gas turbines because they can function even in areas with limited quality water reserves, such as maritime platforms and in the desert. In this paper, we are going to show that, although water injection is still used, "dry" control technologies of burning became favourite methods for the majority of users on the industrial power generators market. The great dependency between the creation of nitric oxides and the temperature reveals the effect of direct water or steam injection on reducing nitric oxides. Recent research showed that a reduction up to 85% of nitric oxides may be obtained by using the water or steam injection all together with the improvement of aerodynamic character of the burning room.

Reduction of CO2 emissions by reduction of paper use for publication applications

Energy Technology Data Exchange (ETDEWEB)

Van den Reek, J.A.

1999-10-01

The main research question of this study is as follows: What is the technical potential for reducing paper use in the field of publication applications in Western Europe within a time frame of 10-20 years, and what will the consequences for CO2 emissions be? To answer this central question we have defined the next four subquestions, all related to Western Europe: (1) How were the historical trends for the consumption figures of publication papers?; (2) What will be the expected publication paper consumption the next 10-20 years based on the historical trends, and what will be the influence on the related CO2 emissions?; (3) What technical opportunities do we see to reduce the future paper consumption trend for publication applications and what will be the individual and cumulative technical potential of these innovations?; (4) Does implementation of the technical opportunities lead to a significant dematerialization effect? Chapter 2 describes the chosen research method. In Chapter 3 we will introduce and define the paper types studied. Furthermore, Chapter 3 describes the detailed division of publication papers we have used in this study and the relationship with pulp and papermaking. After reading this chapter it has to be clear which paper production methods and paper types are (per ton) responsible for how much CO2 emissions. To get an overall-impression of the relevance of certain papers for CO2 emission numbers it is important to have insight into the historical consumption patterns of publication papers. Chapter 4 pays attention to these consumption patterns. Chapter 5 describes the most important trend factors that may influence future paper consumption patterns and in Chapter 6 this is translated into three possible consumption growth scenarios. The first and second growth scenarios are only based on extrapolations from historical figures, the third scenario is based on some of the most significant potential reduction measures. Furthermore, Chapter 6 gives

Effects of ferric iron reduction and regeneration on nitrous oxide and methane emissions in a rice soil.

Science.gov (United States)

Huang, Bin; Yu, Kewei; Gambrell, Robert P

2009-01-01

A laboratory soil slurry experiment and an outdoor pot experiment were conducted to study effects of ferric iron (Fe(III)) reduction and regeneration on nitrous oxide (N(2)O) and methane (CH(4)) emissions in a rice (Oryza sativa L.) soil. The anoxic slurry experiment showed that enhancing microbial Fe(III) reduction by ferrihydrite amendment (40 mol Fe g(-1)) transitionally stimulated N(2)O production and lowered CH(4) production by 16% during an initial 33-day incubation. Increased regeneration of Fe(III) through a 4-day aeration period in the Fe-amended slurry compared to the control slurry reduced CH(4) emission by 30% in the subsequent 15-day anaerobic incubation. The pot experiment showed that ferrihydrite amendment (63 micromol Fe g(-1)) stimulated N(2)O fluxes in the days following flooding. The Fe amendment suppression on CH(4) emission was obscured in the early season but became significant upon reflooding in the mid- and late-seasons. As a result, seasonal CH(4) emission in Fe-amended pots was 26% lower than the control with a single 2-day drainage and 69% lower with a double 2-day drainage. The reduction in CH(4) emission upon reflooding from the Fe-amended pots was mainly attributed to the increased Fe(III) regeneration during drainage showing a mechanism of Fe(III) regeneration in mitigating CH(4) emission by short-term drainage in flooded soils.

The political economy of emissions trading; L'economie politique des marches de permis d'emissions negociables

Energy Technology Data Exchange (ETDEWEB)

Hanoteau, J

2004-06-15

This thesis is a positive analysis of emissions trading systems' implementation. We explain why allowances are generally granted for free even though normative economic analysis recommends their sale. We show empirically that free tradable permits, source of windfall profit, motivate rent seeking behaviours. The study focuses on the US market for SO{sub 2} emissions allowances. The initial allocation rule resulted from parliamentary discussions that looked like a zero sum game. We formalize it as an endogenous sharing rule, function of lobbying effort, and we test it using political (money) contributions.We analyse theoretically the behaviour of an influenced regulator that has chosen to organize a market for permits and that must still decide on two policy variables: the whole quantity of permits and the way to allocate them initially. We formalize this decisions making process with the common agency model of politics.We show that the choice of an initial allocation rule is not neutral in presence of political market failures (lobbying). The decision to sell the permits or to grant them for free modifies the shareholders' incentive, in a polluting industry, to pressure for or against the reduction of legal emissions.Then, we analyse the public arbitration between the two policy variables when several industrial lobbies play a partially cooperative game for the free permits. The regulator chooses in priority to grant the rights for free rather than to manipulate their quantity, and this constitutes an efficient answer to the political influence. (author)

Consumer-supplier-government triangular relations. Rethinking the UK policy path for carbon emissions reduction from the UK residential sector

Energy Technology Data Exchange (ETDEWEB)

Parag, Yael; Darby, Sarah [Environmental Change Institute, University of Oxford, OUCE, South Parks Road, Oxford OX1 3QY (United Kingdom)

2009-10-15

The UK residential (household) sector is responsible for approximately 30% of total carbon dioxide emissions and is often seen as the most promising in terms of early reductions. As most direct household emissions come from only two fuel sources, this paper critically examines how existing emissions reduction policies for the sector shape - and are shaped by - relations between the three main groups of actor in this policy domain: central government, gas and electricity suppliers, and energy users. Focusing on relations between three dyads (government-suppliers, suppliers-consumers and consumers-government) enables us to examine aspects of demand reduction that have often been overlooked to date. By 'relations' we refer to services, power relationships and flows of capital and information, as well as less easily defined elements such as loyalty, trust and accountability. The paper argues that the chosen government policy path to deliver demand reduction, which heavily emphasises the suppliers' role, suffers from principal-agent problems, fails to align consumers and supplier interests toward emissions reduction, and does not yet portray a lower-carbon future in positive terms. It suggests that more attention should be paid to government-consumer relations, recognising that energy consumers are also citizens. (author)

Consumer-supplier-government triangular relations: Rethinking the UK policy path for carbon emissions reduction from the UK residential sector

Energy Technology Data Exchange (ETDEWEB)

Parag, Yael [Environmental Change Institute, University of Oxford, OUCE, South Parks Road, Oxford OX1 3QY (United Kingdom)], E-mail: yael.parag@ouce.ox.ac.uk; Darby, Sarah [Environmental Change Institute, University of Oxford, OUCE, South Parks Road, Oxford OX1 3QY (United Kingdom)

2009-10-15

The UK residential (household) sector is responsible for approximately 30% of total carbon dioxide emissions and is often seen as the most promising in terms of early reductions. As most direct household emissions come from only two fuel sources, this paper critically examines how existing emissions reduction policies for the sector shape - and are shaped by - relations between the three main groups of actor in this policy domain: central government, gas and electricity suppliers, and energy users. Focusing on relations between three dyads (government-suppliers, suppliers-consumers and consumers-government) enables us to examine aspects of demand reduction that have often been overlooked to date. By 'relations' we refer to services, power relationships and flows of capital and information, as well as less easily defined elements such as loyalty, trust and accountability. The paper argues that the chosen government policy path to deliver demand reduction, which heavily emphasises the suppliers' role, suffers from principal-agent problems, fails to align consumers and supplier interests toward emissions reduction, and does not yet portray a lower-carbon future in positive terms. It suggests that more attention should be paid to government-consumer relations, recognising that energy consumers are also citizens.

CO2 sequestration. World CO2 emission reduction by forest plantations on agricultural land up to 2050

International Nuclear Information System (INIS)

Dameron, V.; Barbier, C.; Riedacker, A.

2005-01-01

The main objective of this study was to determine the possible contribution on CO 2 emission reductions of new forest plantations on agricultural land which may become available in the world from now to 2050. Emission reductions have been calculated by taking into account potential changes in carbon stocks on afforested land (in biomass and soil) and replacement with biomass of fossil fuel and material such as steel, aluminium or concrete. Increase of carbon stocks in wood as building material and final conversion of wood recycled from buildings into energy to replace fossil fuel have also been taken into account. CO 2 emission reductions (or carbon benefits) from afforested agricultural land become significant only after 2030 or 2050, and even at a later stage with long rotations. In the case of the latter, about 100 years are needed to get the full benefits. Forest plantations can therefore only be considered as long term options

Scenario analysis on CO2 emissions reduction potential in China's iron and steel industry

International Nuclear Information System (INIS)

Wang Ke; Wang Can; Lu Xuedu; Chen Jining

2007-01-01

The international climate community has begun to assess a range of possible options for strengthening the international climate change effort after 2012. Analysis of the potential for sector-based emissions reduction and relevant mitigation options will provide the necessary background information for the debate. In order to assess the CO 2 abatement potential of China's steel industry, a model was developed using LEAP software to generate 3 different CO 2 emission scenarios for the industry from 2000 to 2030. The abatement potentials of different scenarios were compared, and their respective feasibilities were assessed according to the cost information. High priority abatement measures were then identified. The results show that the average CO 2 abatement per year in the Recent Policy scenario and in the New Policy scenario, compared with the reference scenario, are 51 and 107 million tons, respectively. The corresponding total incremental costs are 9.34 and 80.95 billion dollars. It is concluded that there is great potential for CO 2 abatement in China's steel industry. Adjusting the structure of the industry and technological advancement will play an important role in emissions reduction. Successful implementation of current sustainable development policies and measures will result in CO 2 abatement at a low cost. However, to achieve higher levels of abatement, the cost will increase dramatically. In the near future, specific energy conservation technologies such as dry coke quenching, exhaust gas and heat recovery equipment will be of great significance. However, taking a long term perspective, emissions reduction will rely more on the adjustment of production processes and the application of more modern large scale plants. Advanced blast furnace technology will inevitably play an important role

Game Theoretic Analysis of Carbon Emission Reduction and Sales Promotion in Dyadic Supply Chain in Presence of Consumers’ Low-Carbon Awareness

Directory of Open Access Journals (Sweden)

Liangjie Xia

2014-01-01

Full Text Available The paper studies how the combination of the manufacturer’s carbon emission reduction and the retailer’s emission reduction relevant promotion impacts the performances of a dyadic supply chain in low-carbon environment. We consider three typical scenarios, that is, centralized and decentralized without or with side-payment. We compare measures of supply chain performances, such as profitabilities, emission reduction efficiencies, and effectiveness, in these scenarios. To improve chain-wide performances, a new side-payment contract is designed to coordinate the supply chain and numerical experiments are also conducted. We find the following. (1 In decentralized setting, the retailer will provide emission cutting allowance to the manufacturer only if their unit product profit margin is higher enough than the manufacturer’s, and the emission reduction level of per unit product is a monotonically increasing function with respect to the cost pooling proportion provided by the retailer; (2 the new side-payment contract can coordinate the dyadic supply chain successfully due to its integrating sales promotion effort and emission reduction input, which results in system pareto optimality under decentralized individual rationality but achieves a collective rationality effect in the centralized setting; (3 when without external force’s regulation, consumers’ low-carbon awareness is to enhance consumers’ utility and decrease profits of supply chain firms.

Detection from space of a reduction in anthropogenic emissions of nitrogen oxides during the Chinese economic downturn

Science.gov (United States)

Lin, J.-T.; McElroy, M. B.

2011-08-01

Rapid economic and industrial development in China and relatively weak emission controls have resulted in significant increases in emissions of nitrogen oxides (NOx) in recent years, with the exception of late 2008 to mid 2009 when the economic downturn led to emission reductions detectable from space. Here vertical column densities (VCDs) of tropospheric NO2 retrieved from satellite observations by SCIAMACHY, GOME-2 and OMI (both by KNMI and by NASA) are used to evaluate changes in emissions of NOx from October 2004 to February 2010 identifying impacts of the economic downturn. Data over polluted regions of Northern East China suggest an increase of 27-33 % in 12-month mean VCD of NO2 prior to the downturn, consistent with an increase of 49 % in thermal power generation (TPG) reflecting the economic growth. More detailed analysis is used to quantify changes in emissions of NOx in January over the period 2005-2010 when the effect of the downturn was most evident. The GEOS-Chem model is employed to evaluate the effect of changes in chemistry and meteorology on VCD of NO2. This analysis indicates that emissions decreased by 20 % from January 2008 to January 2009, close to the reduction of 18 % in TPG that occurred over the same interval. A combination of three independent approaches indicates that the economic downturn was responsible for a reduction in emissions by 9-11 % in January 2009 with an additional decrease of 10 % attributed to the slow-down in industrial activity associated with the coincident celebration of the Chinese New Year; errors in the estimate are most likely less than 3.4 %.

Assessing “Dangerous Climate Change”: Required Reduction of Carbon Emissions to Protect Young People, Future Generations and Nature

Science.gov (United States)

Hansen, James; Kharecha, Pushker; Sato, Makiko; Masson-Delmotte, Valerie; Ackerman, Frank; Beerling, David J.; Hearty, Paul J.; Hoegh-Guldberg, Ove; Hsu, Shi-Ling; Parmesan, Camille; Rockstrom, Johan; Rohling, Eelco J.; Sachs, Jeffrey; Smith, Pete; Steffen, Konrad; Van Susteren, Lise; von Schuckmann, Karina; Zachos, James C.

2013-01-01

We assess climate impacts of global warming using ongoing observations and paleoclimate data. We use Earth’s measured energy imbalance, paleoclimate data, and simple representations of the global carbon cycle and temperature to define emission reductions needed to stabilize climate and avoid potentially disastrous impacts on today’s young people, future generations, and nature. A cumulative industrial-era limit of ∼500 GtC fossil fuel emissions and 100 GtC storage in the biosphere and soil would keep climate close to the Holocene range to which humanity and other species are adapted. Cumulative emissions of ∼1000 GtC, sometimes associated with 2°C global warming, would spur “slow” feedbacks and eventual warming of 3–4°C with disastrous consequences. Rapid emissions reduction is required to restore Earth’s energy balance and avoid ocean heat uptake that would practically guarantee irreversible effects. Continuation of high fossil fuel emissions, given current knowledge of the consequences, would be an act of extraordinary witting intergenerational injustice. Responsible policymaking requires a rising price on carbon emissions that would preclude emissions from most remaining coal and unconventional fossil fuels and phase down emissions from conventional fossil fuels. PMID:24312568

Baseline options and greenhouse gas emission reduction of clean development mechanism project in urban solid waste management

Energy Technology Data Exchange (ETDEWEB)

Hiramatsu, Ai; Hanaki, K. [Department of Urban Engineering, School of Engineering, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan); Aramaki, T. [Research Center for Advanced Science and Technology, University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8904(Japan)

2003-07-01

The Clean Development Mechanism (CDM) was adopted in the Kyoto Protocol as a flexibility mechanism to reduce greenhouse gases (GHGs) and has been started with such projects as improving efficiency of individual technology. Although applying various countermeasures to urban areas has significant potentials for reducing GHGs, these countermeasures have not been proposed as CDM projects in the practical stage. A CDM project needs to be validated that it will reduce GHGs additionally compared with a baseline, that is, a predictive value of GHG emissions in the absence of the project. This study examined the introduction of solid waste incineration with electricity generation into three different cities, A, B and C. The main solid waste treatment and the main fuel source are landfill and coal, respectively, in City A, incineration and natural gas in City B, and landfill and hydro in City C. GHG emission reductions of each city under several baseline options assumed here were evaluated. Even if the same technology is introduced, the emission reduction greatly varies according to the current condition and the future plan of the city: 1043-1406 kg CO2/t of waste in City A, 198-580 kg CO2/t in City B, and wide range of zero to over 1000 kg CO2/t in City C. Baseline options also cause significant difference in the emission reduction even in the same city (City C). Incinerating solid waste after removing plastics by source separation in City B increased GHG emission reduction potential up to 730-900 kg CO2/t, which enhances the effectiveness as a CDM project.

Decarbonization of the German energy system due to falling or rising power consumption?; Dekarbonisierung des deutschen Energiesystems durch sinkenden oder steigenden Stromverbrauch?

Energy Technology Data Exchange (ETDEWEB)

Guminski, Andrej; Roon, Serafin von [Forschungsgesellschaft fuer Energiewirtschaft mbH, Muenchen (Germany)

2016-10-15

Since the publication of the draft ''Climate Protection Plan 2050'' and the ''Green Paper on Energy Efficiency'', it is clear that the Federal Government is focusing on the electrification of the heat and transport sector in order to increase the share of renewable energies in these sectors. This step is not uncontroversial, and represents a paradigm shift in science and politics, because the reduction of the cross electricity consumption move into the background. It is now necessary to clearly distinguish between the conventional power consumption, which must continue to be tested for energy savings and efficiency potential, and the new power consumption, here referred to as the coupling current, which is accepted in order to achieve the objectives of the energy transition. Since the consideration of the energy transition as a purely national project is too short, possible positive and negative effects of the European Union Emission Trading System (EU ETS) deserve particular attention with regard to this reorientation. [German] Spaetestens seit der Veroeffentlichung des Entwurfs zum ''Klimaschutzplan 2050'' und des ''Gruenbuch Energieeffizienz'' ist klar, dass die Bundesregierung auf die Elektrifizierung des Waerme- und Verkehrssektors setzt, um den Anteil der erneuerbaren Energien in diesen Sektoren zu steigern. Dieser Schritt ist nicht unumstritten und stellt einen Paradigmenwechsel in Wissenschaft und Politik dar, denn auf einmal rueckt die Senkung des Bruttostromverbrauchs in den Hintergrund. Es gilt jetzt, klar zu trennen zwischen dem herkoemmlichen Stromverbrauch, der weiterhin auf Energieeinspar- und -effizienzpotenziale hin untersucht werden muss, und dem neuen, hier Koppelstrom genannten Stromverbrauch, welcher in Kauf genommen wird, um die Ziele der Energiewende zu erreichen. Da die Betrachtung der Energiewende als rein nationales Projekt zu kurz greift, verdienen moegliche

Continuous reduction of cyclic adsorbed and desorbed NO{sub x} in diesel emission using nonthermal plasma

Energy Technology Data Exchange (ETDEWEB)

Kuwahara, Takuya [Department of Products Engineering and Environmental Management, Nippon Institute of Technology, 4-1 Gakuendai, Miyashiro-machi, Minamisaitama, Saitama 345-8501 (Japan); Nakaguchi, Harunobu; Kuroki, Tomoyuki [Department of Mechanical Engineering, Osaka Prefecture University, 1-1 Gakuen-cho, Naka-ku, Sakai 599-8531 (Japan); Okubo, Masaaki, E-mail: mokubo@me.osakafu-u.ac.jp [Department of Mechanical Engineering, Osaka Prefecture University, 1-1 Gakuen-cho, Naka-ku, Sakai 599-8531 (Japan)

2016-05-05

Highlights: • High-efficiency continuous diesel NO{sub x} reduction method is proposed. • Characteristics of diesel NO{sub x} adsorption and desorption on adsorbent is provided. • Efficiency of NO{sub x} reduction with nonthermal plasma is evaluated. • Efficiency of NO{sub x} reduction with exhaust gas component recirculation is evaluated. • High NO{sub x} removal efficiency equal to only 1.0% penalty of engine power is achieved. - Abstract: Considering the recent stringent regulations governing diesel NO{sub x} emission, an aftertreatment system for the reduction of NO{sub x} in the exhaust gas has been proposed and studied. The proposed system is a hybrid method combining nonthermal plasma and NO{sub x} adsorbent. The system does not require precious metal catalysts or harmful chemicals such as urea and ammonia. In the present system, NO{sub x} in diesel emission is treated by adsorption and desorption by adsorbent as well as nonthermal plasma reduction. In addition, the remaining NO{sub x} in the adsorbent is desorbed again in the supplied air by residual heat. The desorbed NO{sub x} in air recirculates into the intake of the engine, and this process, i.e., exhaust gas components’ recirculation (EGCR) achieves NO{sub x} reduction. Alternate utilization of two adsorption chambers in the system can achieve high-efficiency NO{sub x} removal continuously. An experiment with a stationary diesel engine for electric power generation demonstrates an energy efficiency of 154 g(NO{sub 2})/kWh for NO{sub x} removal and continuous NO{sub x} reduction of 70.3%. Considering the regulation against diesel emission in Japan, i.e., the new regulation to be imposed on vehicles of 3.5–7.5 ton since 2016, the present aftertreatment system fulfills the requirement with only 1.0% of engine power.

Energy saving and emission reduction: A project of coal-resource integration in Shanxi Province, China

International Nuclear Information System (INIS)

Zhang Jianjun; Fu Meichen; Geng Yuhuan; Tao Jin

2011-01-01

The small or middle coal mines with illegal operations in developing countries or regions can cause bad energy waste and environmental disruption. The project of coal-resource integration in Shanxi Province of China gives a new idea or an approach to energy saving and emission reduction. It is a social- and economic-ecological project. The paper shows the targets of energy saving and emission reduction in Shanxi Province, and analyses the aims, significance, design process and implementation of the integration project. Based on that, the paper discusses the challenges and opportunities the project brings. The analysis shows that the project of coal-resource integration in developing countries or regions can effectively improve mining technologies, collect capital and impel international cooperation and exchange. Finally, the paper analyses the concerns about the future, including the possible problems of implementation period, industrial updating, environmental impact and re-employment. However, the successful integration of coal resources can mitigate energy crisis and climate crisis and promote cleaner production effectively. - Highlights: → Coal-resource integration gives a new idea or an approach to energy saving and emission reduction. → Coal-resource integration mitigates climate crisis and promotes cleaner production. → Coal-resource integration brings challenges and opportunities to traditional mining industries.

Contribution of cooperative sector recycling to greenhouse gas emissions reduction: A case study of Ribeirão Pires, Brazil

International Nuclear Information System (INIS)

King, Megan F.; Gutberlet, Jutta

2013-01-01

Highlights: • Cooperative recycling achieves environmental, economic and social objectives. • We calculate GHG emissions reduction for a recycling cooperative in São Paulo, Brazil. • The cooperative merits consideration as a Clean Development Mechanism (CDM) project. • A CDM project would enhance the achievements of the recycling cooperative. • National and local waste management policies support the recycling cooperative. - Abstract: Solid waste, including municipal waste and its management, is a major challenge for most cities and among the key contributors to climate change. Greenhouse gas emissions can be reduced through recovery and recycling of resources from the municipal solid waste stream. In São Paulo, Brazil, recycling cooperatives play a crucial role in providing recycling services including collection, separation, cleaning, stocking, and sale of recyclable resources. The present research attempts to measure the greenhouse gas emission reductions achieved by the recycling cooperative Cooperpires, as well as highlight its socioeconomic benefits. Methods include participant observation, structured interviews, questionnaire application, and greenhouse gas accounting of recycling using a Clean Development Mechanism methodology. The results show that recycling cooperatives can achieve important energy savings and reductions in greenhouse gas emissions, and suggest there is an opportunity for Cooperpires and other similar recycling groups to participate in the carbon credit market. Based on these findings, the authors created a simple greenhouse gas accounting calculator for recyclers to estimate their emissions reductions

Contribution of cooperative sector recycling to greenhouse gas emissions reduction: A case study of Ribeirão Pires, Brazil

Energy Technology Data Exchange (ETDEWEB)

King, Megan F., E-mail: mfking@uvic.ca [The Community-Based Research Laboratory, Department of Geography, University of Victoria, PO Box 3060 STN CSC, Victoria, BC V8W 3R4 (Canada); Gutberlet, Jutta, E-mail: gutber@uvic.ca [Department of Geography, University of Victoria, PO Box 3060 STN CSC, Victoria, BC V8W 3R4 (Canada)

2013-12-15

Highlights: • Cooperative recycling achieves environmental, economic and social objectives. • We calculate GHG emissions reduction for a recycling cooperative in São Paulo, Brazil. • The cooperative merits consideration as a Clean Development Mechanism (CDM) project. • A CDM project would enhance the achievements of the recycling cooperative. • National and local waste management policies support the recycling cooperative. - Abstract: Solid waste, including municipal waste and its management, is a major challenge for most cities and among the key contributors to climate change. Greenhouse gas emissions can be reduced through recovery and recycling of resources from the municipal solid waste stream. In São Paulo, Brazil, recycling cooperatives play a crucial role in providing recycling services including collection, separation, cleaning, stocking, and sale of recyclable resources. The present research attempts to measure the greenhouse gas emission reductions achieved by the recycling cooperative Cooperpires, as well as highlight its socioeconomic benefits. Methods include participant observation, structured interviews, questionnaire application, and greenhouse gas accounting of recycling using a Clean Development Mechanism methodology. The results show that recycling cooperatives can achieve important energy savings and reductions in greenhouse gas emissions, and suggest there is an opportunity for Cooperpires and other similar recycling groups to participate in the carbon credit market. Based on these findings, the authors created a simple greenhouse gas accounting calculator for recyclers to estimate their emissions reductions.

Assessment of the Greenhouse Gas Emission Reduction Potential of Ultra-Clean Hybrid-Electric Vehicles

OpenAIRE

Burke, A.F.; Miller, M.

1997-01-01

The study focused on the emission reduction and fuel economy benefits of the application of hybrid/electric powertrain technology to tight-duty vehicles (mid-size and compact passenger cars). The approach taken was to calculate the exhaust emissions (gm/mi) energy use (Wh/mi and mpg) for a wide range of vehicle designs (steel and light-weight materials), engines, energy storage devices, control strategies, and driving cycles using two vehicle simulation programs (SIMPLEV and AVTE). The full f...

Developments in greenhouse gas emissions and net energy use in Danish agriculture - How to achieve substantial CO{sub 2} reductions?

Energy Technology Data Exchange (ETDEWEB)

Dalgaard, T., E-mail: tommy.dalgaard@agrsci.dk [Aarhus University, Department of Agroecology, Blichers Alle 20, P.O. Box 50, DK-8830 Tjele (Denmark); Olesen, J.E.; Petersen, S.O.; Petersen, B.M.; Jorgensen, U.; Kristensen, T.; Hutchings, N.J. [Aarhus University, Department of Agroecology, Blichers Alle 20, P.O. Box 50, DK-8830 Tjele (Denmark); Gyldenkaerne, S. [Aarhus University, National Environmental Research Institute, Frederiksborgvej 399, DK-4000 Roskilde (Denmark); Hermansen, J.E. [Aarhus University, Department of Agroecology, Blichers Alle 20, P.O. Box 50, DK-8830 Tjele (Denmark)

2011-11-15

Greenhouse gas (GHG) emissions from agriculture are a significant contributor to total Danish emissions. Consequently, much effort is currently given to the exploration of potential strategies to reduce agricultural emissions. This paper presents results from a study estimating agricultural GHG emissions in the form of methane, nitrous oxide and carbon dioxide (including carbon sources and sinks, and the impact of energy consumption/bioenergy production) from Danish agriculture in the years 1990-2010. An analysis of possible measures to reduce the GHG emissions indicated that a 50-70% reduction of agricultural emissions by 2050 relative to 1990 is achievable, including mitigation measures in relation to the handling of manure and fertilisers, optimization of animal feeding, cropping practices, and land use changes with more organic farming, afforestation and energy crops. In addition, the bioenergy production may be increased significantly without reducing the food production, whereby Danish agriculture could achieve a positive energy balance. - Highlights: > GHG emissions from Danish agriculture 1990-2010 are calculated, including carbon sequestration. > Effects of measures to further reduce GHG emissions are listed. > Land use scenarios for a substantially reduced GHG emission by 2050 are presented. > A 50-70% reduction of agricultural emissions by 2050 relative to 1990 is achievable. > Via bioenergy production Danish agriculture could achieve a positive energy balance. - Scenario studies of greenhouse gas mitigation measures illustrate the possible realization of CO{sub 2} reductions for Danish agriculture by 2050, sustaining current food production.

Modeling of policies for reduction of GHG emissions in energy sector using ANN: case study-Croatia (EU).

Science.gov (United States)

Bolanča, Tomislav; Strahovnik, Tomislav; Ukić, Šime; Stankov, Mirjana Novak; Rogošić, Marko

2017-07-01

This study describes the development of tool for testing different policies for reduction of greenhouse gas (GHG) emissions in energy sector using artificial neural networks (ANNs). The case study of Croatia was elaborated. Two different energy consumption scenarios were used as a base for calculations and predictions of GHG emissions: the business as usual (BAU) scenario and sustainable scenario. Both of them are based on predicted energy consumption using different growth rates; the growth rates within the second scenario resulted from the implementation of corresponding energy efficiency measures in final energy consumption and increasing share of renewable energy sources. Both ANN architecture and training methodology were optimized to produce network that was able to successfully describe the existing data and to achieve reliable prediction of emissions in a forward time sense. The BAU scenario was found to produce continuously increasing emissions of all GHGs. The sustainable scenario was found to decrease the GHG emission levels of all gases with respect to BAU. The observed decrease was attributed to the group of measures termed the reduction of final energy consumption through energy efficiency measures.

What are the opportunities related to the trading of emission reductions in the electricity market?; Quelles sont les opportunites reliees aux echanges de reduction d'emission dans le marche de l'electricite

Energy Technology Data Exchange (ETDEWEB)

Lemieux, M. [Gaz Metropolitain, Montreal, PQ (Canada)

2003-07-01

Gaz Metropolitain distributes approximately 97 per cent of the natural gas used in Quebec. It operates an 8300 kilometre (km) pipeline network and has 150,000 customers. Revenues in 2002 were 1.6 billion. Since 1990, Gaz Metropolitain has reduced its greenhouse gas (GHG) emissions by 30 per cent. After a brief look at the sources of energy in Quebec and their associated GHG emissions, the author discussed the viability of a closed emission trading system with only a limited number of permits. The system could be opened up through the creation of credits in excluded sectors. Under the Kyoto Protocol, countries are allocated emitting permits in an open system since the credits are included in the Protocol. In Canada, the federal government has announced that a domestic emission trading system will be implemented for large emitters. The thermal production sector will be covered by a system consisting of an exchange of rights. Electricity produced from renewable energy sources would be excluded from the system, and it is yet to be decided whether credits could be generated. The creation of credits under the Canadian plan was reviewed. The projects accepted under the Greenhouse Gas Emission Reduction Trading Pilot (GERT) were examined and the development of the project was described. Some of the projects under GERT include a new dam in Newfoundland, a wind power project in Alberta, and a biomass cogeneration project in British Columbia to name but a few. It was noted that quantifying emissions in the case of indirect reductions is complex but feasible. 3 refs., tabs., figs.

Reduction of CO2 emission by INCAM model in Malaysia biomass power plants during the year 2016.

Science.gov (United States)

Amin, Nor Aishah Saidina; Talebian-Kiakalaieh, Amin

2018-03-01

As the world's second largest palm oil producer and exporter, Malaysia could capitalize on its oil palm biomass waste for power generation. The emission factors from this renewable energy source are far lower than that of fossil fuels. This study applies an integrated carbon accounting and mitigation (INCAM) model to calculate the amount of CO 2 emissions from two biomass thermal power plants. The CO 2 emissions released from biomass plants utilizing empty fruit bunch (EFB) and palm oil mill effluent (POME), as alternative fuels for powering steam and gas turbines, were determined using the INCAM model. Each section emitting CO 2 in the power plant, known as the carbon accounting center (CAC), was measured for its carbon profile (CP) and carbon index (CI). The carbon performance indicator (CPI) included electricity, fuel and water consumption, solid waste and waste-water generation. The carbon emission index (CEI) and carbon emission profile (CEP), based on the total monthly carbon production, were determined across the CPI. Various innovative strategies resulted in a 20%-90% reduction of CO 2 emissions. The implementation of reduction strategies significantly reduced the CO 2 emission levels. Based on the model, utilization of EFB and POME in the facilities could significantly reduce the CO 2 emissions and increase the potential for waste to energy initiatives. Copyright © 2017 Elsevier Ltd. All rights reserved.

Transformations of highly enriched uranium into metal or oxide; Etudes des procedes de transformation des composes d'uranium a fort enrichissement isotopique

Energy Technology Data Exchange (ETDEWEB)

Nollet, P; Sarrat, P [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1964-07-01

described successively, together with the studies which led to their development The civil engineering construction was begun in June 1962. The workshops are to start production in may 1964. (authors) [French] Les ateliers de traitement d'uranium enrichi de Cadarache ont pour but: d'une part, de transformer l'hexafluorure d'uranium en metal, ou en oxyde, et d'autre part, de recuperer l'uranium contenu dans les dechets divers produits lors des operations de transformation metallurgique. Les principes qui ont ete suivis pour la conception et la securite de ces ateliers sont exposes. La securite nucleaire est basee sur la geometrie des appareils de traitement. Pour mettre au point les procedes et la technologie de ces ateliers, de nombreuses etudes ont ete conduites depuis 1960, dont certaines ont abouti a des realisations originales. La transformation de l'hexafluorure d'uranium a fort enrichissement isotopique s'effectue, soit par injection en phase gazeuse dans l'ammoniaque, soit par un procede original de reduction directe en tetrafluorure d'uranium par l'hydrogene. La recuperation de l'uranium contenu dans les dechets metalliques d'uranium-zirconium s'operera par attaque par l'acide chlorhydrique, puis traitement du chlorure d'uranium par le fluor afin d'obtenir l'uranium sous forme d'hexafluorure. La recuperation de l'uranium contenu dans les dechets divers s'opere par un procede classique de raffinage: grillage des dechets metalliques, dissolution de l'oxyde obtenu dans l'acide nitrique, purification par solvant au tributyl-phosphate, precipitation a l'ammoniaque, calcination reduction fluoruration, calciothermie et traitement des scories. Deux ateliers separes fonctionnent suivant ce procede: l'un traite l'uranium d'un enrichissement isotopique inferieur ou egal a 3 p. 100, l'autre est reserve aux forts enrichissements. La mise en oeuvre, d'une maniere nucleairement sure, de chacune des etapes du procede a pose des problemes technologiques particuliers et a conduit a

Reduction of CO/sub 2/ emissions through fuel economy standards for diesel cars in pakistan

International Nuclear Information System (INIS)

Memon, L.A.; Mehlia, T.M.I.; Hassan, M.H.

2007-01-01

In Pakistan, like many developing countries, the increasing prosperity and population growth are resulting in accelerated growth in vehicle population and vehicle kilometers traveled. This causes air pollution due to huge CO/sub 2/ emissions. Automobile fuel economy standards have proven to be one of the most effective tools to control oil demand thereby reducing the GHG (Green House Gas) emissions like CO/sub 2/, This study presents the investigation to apply fuel economy standards in Pakistan, in order to predict the potential reduction in CO/sub 2/ emissions and saving in fuel demand. The study is focused on only diesel cars and the data of diesel car owners for previous fifteen years is obtained from the related sources in Pakistan. A growth trend of diesel car owners was analyzed and the number of diesel car owners in future was predicted by applying database computer software. Calculations were made to study the effect of fuel economy standards in terms of saving in fuel demand and the reduction in CO/sub 2/ emissions. The results reveal the potential application of fuel economy standards and it was found that a cumulative amount of fuel 39266775 liters can be saved and CO/sub 2/ emissions can be reduced by 106021 tons at the end of 2011-2012, if fuel economy standards are implemented in 2008-2009. (author)

Inventory of primary particulates emissions; Inventaire des emissions de particules primaires

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-12-01

CITEPA carried out a national inventory on particulate emissions. This report presents the results of this study for a great number of sectors and it covers a larger number of sources than the previous CITEPA inventories on particles and some other inventories carried out by International organisms (TNO, IIASA). In particular, at the present time, fugitive dust emissions for some sources are rarely taken into account in inventories because of poor knowledge and they are still the subject of researches in order to validate the emission results. (author)

Sun - the energy of the 21. century. Strategies for cost reduction in solar cells; Sonne - Die Energie des 21. Jahrhunderts. Strategien zur Kostensenkung von Solarzellen

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-10-01

The document comprises 2 sections with 20 contributions each. Subjects: 1. Solar energy, power for the 21st century,; 2. Strategies for cost reduction in solar cells. [German] Das Document behandelt in zwei Bloeken und mit 20 Betraegen die folgenden Themen: 1. Die ''Sonne'' als die Energie des 21. Jahrhunderts und 2. Strategien zur Kostensenkung von Solarzellen. (orig.)

Reduction in nitrogen oxide emissions by boiler construction companies in the USA

Energy Technology Data Exchange (ETDEWEB)

Kotler, V.R.

1989-11-01

Explains that in the USA greater emphasis is placed on reducing pollutant emissions by altering the combustion process than by cleaning flue gases. Results of a joint USA/FRG program show that NO{sub x} concentrations may vary greatly according to the type of slag removal (solid or liquid) and the location and type of burners used. Examines variants and demonstrates that the most effective method of reducing NO{sub x} emissions from large-scale pulverized-coal fired boilers is three-stage combustion used in conjunction with a flue gas cleaning method such as selective catalytic reduction (cyclone burners). Trials found that this method results in a 60% drop in NO{sub x} emissions and, if limestone is added to the tertiary air, a 20% drop in SO{sub 2}. Best results from an economic aspect were achieved when gas was burned in the extra burners. 6 refs.

Grooved floor system for cattle housing: ammonia emission reduction and good slip resistance

NARCIS (Netherlands)

Swierstra, D.; Braam, C.R.; Smits, M.C.J.

2001-01-01

To improve the slip resistance of solid floors in dairy cow houses and to achieve the ammonia emission reduction prescribed by the Dutch government, precast concrete floors with grooves and a dung scraper were investigated. The grooves parallel to the alley had 160 mm center-to-center spacing and

How to ensure greenhouse gas emission reductions by increasing the use of biofuels? - Suitability of the European Union sustainability criteria

International Nuclear Information System (INIS)

Soimakallio, Sampo; Koponen, Kati

2011-01-01

Biofuels are promoted in many parts of the world. However, concern of environmental and social problems have grown due to increased production of biofuels. Therefore, many initiatives for sustainability criteria have been announced. As a part of the European Union (EU) renewable energy promotion directive (RED), the EU has introduced greenhouse gas (GHG) emission-saving requirements for biofuels along with the first-ever mandate methodology to calculate the GHG emission reduction. As explored in this paper, the RED methodology, based on life-cycle assessment (LCA) approach, excludes many critical issues. These include indirect impacts due to competition for land, biomass and other auxiliary inputs. Also, timing issues, allocation problems, and uncertainty of individual parameters are not yet considered adequately. Moreover, the default values provided in the RED for the GHG balances of biofuels may significantly underestimate their actual impacts. We conclude that the RED methodology cannot ensure the intended GHG emission reductions of biofuels. Instead, a more comprehensive approach is required along with additional data and indicators. Even if it may be very difficult to verify the GHG emission reductions of biofuels in practice, it is necessary to consider the uncertainties more closely, in order to mitigate climate change effectively. -- Highlights: → The EU introduced mandatory criteria for greenhouse gas emissions of biofuels. → The aim of the criteria is to ensure reduction in GHG emissions. → We analysed and discussed the suitability of the criteria. → The criteria may significantly underestimate the actual GHG emissions. → A more comprehensive approach is required along with additional data and indicators.

Emissions of CO{sub 2} from road freight transport in London: Trends and policies for long run reductions

Energy Technology Data Exchange (ETDEWEB)

Zanni, Alberto M., E-mail: a.m.zanni@lboro.ac.u [Transport Studies Group, Department of Civil and Building Engineering, Loughborough University, LE11 3TU Loughborough (United Kingdom); Bristow, Abigail L., E-mail: a.l.bristow@lboro.ac.u [Transport Studies Group, Department of Civil and Building Engineering, Loughborough University, LE11 3TU Loughborough (United Kingdom)

2010-04-15

Freight transport has been receiving increasing attention in both literature and practice following the growing recognition of its importance in urban transport planning. This paper analyses historical and projected road freight CO{sub 2} emissions in the city of London and explores the potential mitigation effect of a set of freight transport policies and logistics solutions. Findings indicate a range of policies with potential to reduce emissions in the period up to 2050. However, this reduction would appear to only be capable of partly counterbalancing the projected increase in freight traffic. More profound behavioural measures therefore appear to be necessary for London's CO{sub 2} emissions reduction targets to be met.

Emissions of CO{sub 2} from road freight transport in London. Trends and policies for long run reductions

Energy Technology Data Exchange (ETDEWEB)

Zanni, Alberto M.; Bristow, Abigail L. [Transport Studies Group, Department of Civil and Building Engineering, Loughborough University, LE11 3TU Loughborough (United Kingdom)

2010-04-15

Freight transport has been receiving increasing attention in both literature and practice following the growing recognition of its importance in urban transport planning. This paper analyses historical and projected road freight CO{sub 2} emissions in the city of London and explores the potential mitigation effect of a set of freight transport policies and logistics solutions. Findings indicate a range of policies with potential to reduce emissions in the period up to 2050. However, this reduction would appear to only be capable of partly counterbalancing the projected increase in freight traffic. More profound behavioural measures therefore appear to be necessary for London's CO{sub 2} emissions reduction targets to be met. (author)

Provincial Carbon Emissions Reduction Allocation Plan in China Based on Consumption Perspective

Directory of Open Access Journals (Sweden)

Xuecheng Wang

2018-04-01

Full Text Available China is a country with substantial differences in economic development, energy consumption mix, resources, and technologies, as well as the development path at the provincial level. Therefore, China’s provinces have different potential and degrees of difficulty to carry out carbon emission reduction (CER requirements. In addition, interprovincial trade, with a large amount of embodied carbon emissions, has become the fastest growing driver of China’s total carbon emissions. A reasonable CER allocation plan is, therefore, crucial for realizing the commitment that China announced in the Paris Agreement. How to determine a fair way to allocate provincial CER duties has become a significant challenge for both policy-makers and researchers. In this paper, ecological network analysis (ENA, combined with a multi-regional input-output model (MRIO, is adopted to build an ecological network of embodied emissions across 30 provinces. Then, by using flow analysis and utility analysis based on the ENA model, the specific relationships among different provinces were determined, and the amount of responsibility that a certain province should take quantified, with respect to the embodied carbon emission (ECE flows from interprovincial trade. As a result, we suggest a new CER allocation plan, based on the detailed data of interprovincial relationships and ECE flows.

What are the opportunities related to the trading of emission reductions in the electricity market?

International Nuclear Information System (INIS)

Lemieux, M.

2003-01-01

Gaz Metropolitain distributes approximately 97 per cent of the natural gas used in Quebec. It operates an 8300 kilometre (km) pipeline network and has 150,000 customers. Revenues in 2002 were 1.6 billion. Since 1990, Gaz Metropolitain has reduced its greenhouse gas (GHG) emissions by 30 per cent. After a brief look at the sources of energy in Quebec and their associated GHG emissions, the author discussed the viability of a closed emission trading system with only a limited number of permits. The system could be opened up through the creation of credits in excluded sectors. Under the Kyoto Protocol, countries are allocated emitting permits in an open system since the credits are included in the Protocol. In Canada, the federal government has announced that a domestic emission trading system will be implemented for large emitters. The thermal production sector will be covered by a system consisting of an exchange of rights. Electricity produced from renewable energy sources would be excluded from the system, and it is yet to be decided whether credits could be generated. The creation of credits under the Canadian plan was reviewed. The projects accepted under the Greenhouse Gas Emission Reduction Trading Pilot (GERT) were examined and the development of the project was described. Some of the projects under GERT include a new dam in Newfoundland, a wind power project in Alberta, and a biomass cogeneration project in British Columbia to name but a few. It was noted that quantifying emissions in the case of indirect reductions is complex but feasible. 3 refs., tabs., figs

New developments of the KOMPOFERM {sup registered} system. Lean gas management, SMARTFERM, double membrane roof; Neue Entwicklungen des KOMPOFERM {sup registered} -Systems. Schwachgasmanagement, SMARTFERM, Doppelmembrandach

Energy Technology Data Exchange (ETDEWEB)

Striewski, Sandra [KOMPOTEC Kompostierungsanlagen GmbH, Nieheim (Germany)

2012-11-01

The KOMPOFERM {sup registered} dry fermentation process is a mesophilic batch process for biogas production from solid biomass. The system is developed continuously for higher economic efficiency, emission reduction and environmental protection. The contribution describes the optimisations of the KOMPOFERM {sup registered} system and presents examples of its practical implementation, e.g. thermophilic process control, the KOMPOFERM {sup registered} double membrane roof for optimum gas utilisation and reduction of the lean gas volume, the KOMPOFERM {sup registered} plus process with a percolate fermenter below the fermenter tunnels, the automatic feeding system for the rotting and/or fermenter tunnels and SMARTFERM, the dry fermentation module for plants up to 4m000 Mg input. (org.) [German] Als mesophiles Batchverfahren hat sich das KOMPOFERM {sup registered} -Trockenvergaerungsverfahren zur Erzeugung von Biogas aus fester Biomasse am Markt etabliert. Das System wird stetig weiterentwickelt, um die Wirtschaftlichkeit wie auch den Emissions- und Umweltschutz der Anlagen zu verbessern. Die Optimierungen des KOMPOFERM {sup registered} -Systems werden in diesem Artikel erlaeutert und Beispiele fuer deren praktische Umsetzung gegeben, wie die thermophile Prozessfuehrung des Systems, das KOMPOFERM {sup registered} -Doppelmembrandach zur optimalen Gasnutzung und Reduzierung von Schwachgas, das KOMPOFERM {sup registered} plus-Verfahren mit einem Perkolatfermenter unterhalb der Fermentertunnel, das automatische Eintragungsgeraet fuer Rotte- und/oder Fermentertunnel sowie SMARTFERM, das Trockenfermentationsmodul fuer Anlagen bis 4.000 Mg Input. (org.)

Contribution of the renewable energies to the decrease of the greenhouse gases emission for 2010; Contribution des EnR a la reduction des emissions de gaz a effet de serre a l'horizon 2010

Energy Technology Data Exchange (ETDEWEB)

Anon.

2003-03-01

To illustrate the renewable energies contribution to the decrease of the greenhouse gases emission in 2010 (19 Mt of CO{sub 2} per year, of greenhouse gases emission avoided), this document presents the different renewable energies sources and the international context of their implementation. Today data and estimations for 2010 are provided. (A.L.B.)

Using oily wastewater emulsified fuel in boiler: energy saving and reduction of air pollutant emissions.

Science.gov (United States)

Chen, Chun-Chi; Lee, Wen-Jhy

2008-01-01

The limited data for using emulsified oil have demonstrated its effectiveness in reducing flue gas pollutant emissions. The presence of a high concentration of toxic organic compounds in industrial wastewaters always presents significant problems. Therefore, this study was undertaken by using wastewater with COD of 9600 mg/L and total petroleum hydrocarbons-gasoline 440 mg/L for making an emulsified oil (wastewater content 20% with 0.1% surfactant) to evaluate the extent of reductions in both criteria pollutants and polycyclic aromatic hydrocarbons. For comparison, two other systems (heavy oil fuel and water-emulsified oil) were also conducted. The wastewater-emulsified oil fuel results in significant reductions in particulate matter (PM), NO(x), SO2, and CO as compared to heavy oil fuel and similar to those from water/oil emulsified fuel; for PM, it is better in wastewater-emulsified oil. The reductions of total PAH flue gas emissions are 38 and 30% for wastewater- and water-emulsified fuel, respectively; they are 63 and 44% for total BaP(eq), respectively. In addition to reducing flue gas pollutant emissions, the results also demonstrate that the use of wastewater-emulsified fuel in boiler operation provides several advantages: (1) safe disposal of industrial wastewater; and (2) energy savings of about 13%. Thus, wastewater/oil-emulsified fuel is highly suitable for use in boilers.

Combined effect of fuel-design and after-treatment system on reduction of local and global emissions from CI engine.

Science.gov (United States)

Thiyagarajan, S; Geo, V Edwin; Martin, Leenus Jesu; Nagalingam, B

2018-03-22

This experimental study aims to mitigate harmful emissions from a CI engine using bio-energy with carbon capture and storage (BECCS) approach. The engine used for this experimental work is a single cylinder CI engine with a rated power of 5.2 kW at a constant speed of 1500 rpm. The BECCS approach is a combination of plant-based biofuels and carbon capture and storage (CCS) system. The whole investigation was done in four phases: (1) Substituting diesel with Karanja oil methyl ester (KOME) (2) Equal volume blending of Orange oil (ORG) with KOME (3) 20% blending of n-butanol (B) with KOME-ORG blend (4) CCS system with zeolite based non-selective catalytic reduction (NSCR) and mono ethanolamine (MEA) based selective non-catalytic reduction (SNCR) system with KOME-ORG + B20 blend. The experimental results show that substitution of diesel with KOME reduces smoke emission, but increases NO and CO 2 emission. KOME-ORG blend reduces CO 2 and smoke emissions with high NO emission due to combustion improvement. In comparison with the sole combustion of KOME at full load condition, the combination of KOME-ORG + B20 as bio-fuel with zeolite based post-combustion treatment system resulted in a maximum reduction of NO, smoke and CO 2 emission by 41%, 19% and 15% respectively.

Steering levies on the purchase of new cars for the reduction of CO{sub 2} emissions; Lenkungsabgaben zur Senkung des CO{sub 2}-Ausstosses beim Neuwagenkauf. Hintergrund, Mechanismen, Prognosen

Energy Technology Data Exchange (ETDEWEB)

Haan, P. de; Mueller, M.; Peters, A.; Hauser, A.

2007-12-15

This comprehensive final report for the Swiss Federal Office of Energy (SFOE) takes a look at the background, mechanisms and prognoses for the reduction of CO{sub 2} emissions of new cars. This report focuses on policy measures - specifically the collection of budget-neutral so-called 'feebates' - that aim to influence the behaviour of buyers of new cars as a means of enhancing energy efficiency and reducing CO{sub 2} emissions. Both the European Union and Switzerland are pursuing a three-pillar strategy in which agreements with manufacturers and importers (pillar 1) are supplemented by the provision of more detailed information for customers in the form of energy labels for new vehicles as well as catalogues listing levels of fuel consumption (pillar 2). Pillar 3 concerns measures aimed at influencing car buying behaviour, generally based on the use of the energy label for new vehicles in order to realise the existing potentials for reducing CO{sub 2} emissions. The report takes a look at Switzerland's car market, buying behaviour, information on efficient vehicles, acceptance factors and incentive schemes. The findings of the study are presented and commented on.

Carbon emission reductions by substitution of improved cookstoves and cattle mosquito nets in a forest-dependent community

Directory of Open Access Journals (Sweden)

Somanta Chan

2015-07-01

Substitution of conventional cookstoves with improved cookstoves and the use of mosquito nets instead of fuelwood burning could result in using less fuelwood for the same amount of energy needed and thereby result in reduction of carbon emissions and deforestation. To realize this substitution, approximately US$ 15–25 MgCO2−1 is needed depending on discount rates and amounts of emission reduction. Substitution of cookstoves will have direct impacts on the livelihoods of forest-dependent communities and on forest protection. Financial incentives under voluntary and mandatory schemes are needed to materialize this substitution.

Emission concepts for future passenger car diesel engines; Emissionskonzepte fuer zukuenftige Pkw-Dieselmotoren

Energy Technology Data Exchange (ETDEWEB)

Krueger, M.; Wiartalla, A.; Lichtenberg, T.; Koerfer, T. [FEV Motorentechnik, Aachen (Germany)

2003-07-01

In order to keep the current success of the Diesel powered passenger cars also for the future, intensive development effort is absolutely necessary in the near future. A special challenge is presented by the already confirmed or discussed future emission standards. However, every chance must be taken to keep the fuel consumption of the diesel engine respectively diesel powered vehicle on the lowest possible level. In front of this background measures concerning combustion system development as well as exhaust gas aftertreatment are analyzed in this report with respect to their influence on emission reduction and fuel consumption. It can be summarized, that still a significant emission reduction potential exists for the passenger car diesel engine. However, fulfilling the next step of emission legislation, getting effective after 2005, only by combustion system improvement, seems to be a difficult way to go from todays point of view. Especially with respect to fuel consumption, an efficient combination of combustion improvement and exhaust gas aftertreatment represents a more promising solution for the future. Most important for a successful realisation of such an approach will be the overall power consumption of the exhaust gas aftertreatment device. This does also include the thermomanagement of the engine and exhaust gas system as well as the energy losses due to the regeneration demands of the discontinuously working NO{sub x}-and particulate trap. Considering this last issue, a fuel additive as particulate trap regeneration aid as well as the fuel sulphur content respectively the sulphur sensitivity of the NO{sub x}-trap will play a significant role in the future. (orig.) [German] Um den Erfolg des Diesel-Pkw's auch zukuenftig sicherzustellen, sind intensive Entwicklungsarbeiten notwendig. Eine besondere Herausforderung stellen die zukuenftig zu erfuellenden Emissionsanforderungen dar. Dabei muessen alle moeglichen Massnahmen ergriffen werden, um den

Potential reduction of carbon emissions from Crude Palm Oil production based on energy and carbon balances

International Nuclear Information System (INIS)

Patthanaissaranukool, Withida; Polprasert, Chongchin; Englande, Andrew J.

2013-01-01

Highlights: ► We evaluate energy and carbon equivalence from CPO production based on a CBM. ► Energy spent and produced via carbon movement from palm oil mill was determined. ► Scenarios were formulated to evaluate the potential reduction of carbon emission. ► Utilization of biomass from palm oil mill shows the high potential of C-reduction. -- Abstract: This study aimed to evaluate energy and carbon equivalences (CE) associated with palm oil milling and to evaluate sustainability alternatives for energy consumption. Appropriate ways to reduce carbon emissions were also evaluated. A field survey was carried out to quantify the input and output of energy and materials following the conceptual framework of a carbon-balanced model (CBM), which exclude other non-CO 2 greenhouse gases. Survey results indicate that the electrical energy consumption for daily mill start-up averaged 18.7 ± 5.4 kWh/ton Fresh Fruit Bunches (FFBs). This energy is equivalent to 114.4 ± 33.2 kWh/ton Crude Palm Oil (CPO) which was found to be offset by that generated in the mills using palm fiber as a solid fuel. Currently, organic residues contained in the wastewater are anaerobically converted to methane. The methane is used as fuel to generate electricity and sold to an outside grid network at a generation rate of 8.1 ± 2.1 kWh/ton FFB. Based on the CBM approach, carbon emissions observed from the use of fossil energy in palm oil milling were very small; however, total carbon emission from oil palm plantation and palm oil milling were found to be 12.3 kg CE/ton FFB, resulting in the net carbon reduction in CPO production of 2.8 kg CE/ton FFB or 53.7 kg CE/ha-y. Overall, the sum of C-reduction was found 1.2 times greater than that of C-emission. This figure can be increased up to 5.5, if all biomass by-products are used as fuel to generate electricity only. The full potential for carbon reduction from palm oil milling is estimated at 0.94 kW of electric power for every hectare of

Cost-effective policy instruments for greenhouse gas emission reduction and fossil fuel substitution through bioenergy production in Austria

International Nuclear Information System (INIS)

Schmidt, Johannes; Leduc, Sylvain; Dotzauer, Erik; Schmid, Erwin

2011-01-01

Climate change mitigation and security of energy supply are important targets of Austrian energy policy. Bioenergy production based on resources from agriculture and forestry is an important option for attaining these targets. To increase the share of bioenergy in the energy supply, supporting policy instruments are necessary. The cost-effectiveness of these instruments in attaining policy targets depends on the availability of bioenergy technologies. Advanced technologies such as second-generation biofuels, biomass gasification for power production, and bioenergy with carbon capture and storage (BECCS) will likely change the performance of policy instruments. This article assesses the cost-effectiveness of energy policy instruments, considering new bioenergy technologies for the year 2030, with respect to greenhouse gas emission (GHG) reduction and fossil fuel substitution. Instruments that directly subsidize bioenergy are compared with instruments that aim at reducing GHG emissions. A spatially explicit modeling approach is used to account for biomass supply and energy distribution costs in Austria. Results indicate that a carbon tax performs cost-effectively with respect to both policy targets if BECCS is not available. However, the availability of BECCS creates a trade-off between GHG emission reduction and fossil fuel substitution. Biofuel blending obligations are costly in terms of attaining the policy targets. - Highlights: → Costs of energy policies and effects on reduction of CO 2 emissions and fossil fuel consumption. → Particular focus on new bioenergy production technologies such as second generation biofuels. → Spatially explicit techno-economic optimization model. → CO 2 tax: high costs for reducing fossil fuel consumption if carbon capture and storage is available. → Biofuel policy: no significant reductions in CO 2 emissions or fossil fuel consumption.

The impact of China's carbon allowance allocation rules on the product prices and emission reduction behaviors of ETS-covered enterprises

International Nuclear Information System (INIS)

Zhang, Yue-Jun; Wang, Ao-Dong; Tan, Weiping

2015-01-01

It is an important task for China to allocate carbon emission allowance to realize its carbon reduction target and establish carbon trading market. China has designed several allocation rules within seven pilot regions. What influence those rules may cause is closely related with the enthusiasm of emission trading scheme (ETS) covered enterprises' participation in carbon market, and more importantly, with the mechanism design and sustainable development of carbon market. For this purpose, the multi-stage profit model is developed to analyze the ETS-covered enterprises' product prices and emission reduction behaviors under different allocation rules. The results show that, first, under the rules of grandfathering, self-declaration and auctioning, when deciding the optimal product price and optimal carbon emission reduction, those enterprises may focus on maximizing current stage profit; however, under the rule of benchmarking, those enterprises may care more about the impact of current decisions on the profit in next stage. Second, the optimal product price policy is positively correlated with the price of the same kind products, consumers' low-carbon awareness and government subsidy. Finally, along with the increase of carbon price, consumers' low-carbon awareness and government subsidy and the decrease of carbon emission cap, those enterprises tend to reduce carbon emissions. - Highlights: • Analyze the impact of carbon allowance allocation rules on ETS-covered enterprises. • For grandfather, self-declaration and auction, they may maximize current profits. • For benchmark, they care the effect of current decisions on the coming profits. • The optimal product price positively relates to low-carbon awareness and subsidy. • Carbon price, low-carbon awareness and subsidy rise leads their emission reduction.

Strategic research on CO2 emission reduction for China. Application of MARKAL to China energy system

International Nuclear Information System (INIS)

Wang Yongping

1995-09-01

MARKAL was applied to the energy system for analyzing the CO 2 emission reduction in China over the time period from 1990 to 2050. First the Chinese Reference Energy System (CRES) was established based on the framework of MARKAL model. The following conclusions can be drawn from this study. When shifting from scenario LH (low useful energy demand and high import fuel prices) to HL (high demand and low prices), another 33 EJ of primary energy will be consumed and another 2.31 billion tons of CO 2 will be emitted in 2050. Detailed analyses on the disaggregation of CO 2 emissions by Kaya Formula show. The energy intensity (primary energy/GDP) decreases much faster in scenario HL, but the higher growth rate of GDP per capita is the overwhelming factor that results in higher CO 2 emission per capita in the baseline case of scenario HL in comparison with LH. When the carbon taxes are imposed on CO 2 emissions, the residential sector will make the biggest contribution to CO 2 emission abatement from a long-term point of view. However, it's difficult to stabilize CO 2 emission per capita before 2030 in both scenarios even with heavy carbon taxes. When nuclear moratorium occurs, more 560 million tons of CO 2 will be emitted to the atmosphere in 2050 under the same CO 2 tax regime. From the analysis of value flow, CO 2 emission reduction depends largely on new or advanced technologies particularly in the field of electricity generation. The competent technologies switch to those CO 2 less-emitting technologies when surcharging CO 2 emissions. Nuclear power shows significant potential in saving fossil energy resources and reducing CO 2 emissions. (J.P.N.)

Environmental policy. Resolution of the German Federal Government concerning the Air Pollution Abatement Programme of the Federal Republic of Germany based on the fourth report of the Interdepartmental Working Group on Carbon Dioxide Reduction (IMA `CO{sub 2} Reduction`); Umweltpolitik. Beschluss der Bundesregierung zum Klimaschutzprogramm der Bundesrepublik Deutschland auf der Basis des Vierten Berichts der Interministeriellen Arbeitsgruppe ``CO{sub 2}-Reduktion`` (IMA ``CO{sub 2}-Reduktion``)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-11-01

Air pollution abatement is a key issue in German environmental policy. This was stressed again in the 4th report of the Interdepartmental Working Group on Carbon Dioxide Reduction (IMA `CO{sub 2}-Reduktion`), in which the Federal Government confirmed its goal of a 25% reduction of carbon dioxide emissions by 2005 as referred to 1990. This report contains the government decision, the formulatio of the task assigned to the IMA, and the 4th report of the IMA. (orig./SR) [Deutsch] Klimavorsorge ist ein Schwerpunkt der deutschen Umweltpolitik. Dies hat das Bundeskabinett mit der Verabschiedung des 4. Berichts der Interministeriellen Arbeitsgruppe (IMA) ``CO{sub 2}-Reduktion`` nachdruecklich unterstrichen. Mit diesem Beschluss bekraeftigt die Bundesregierung erneut ihr Ziel, die CO{sub 2} Emissionen bis 2005 um 25 % gegenueber 1990 zu senken. Der vorliegende Bericht enthaelt den Beschluss, der Bundesregierung, den Auftrag der Bundesregierung an die Interministerielle Arbeitsgruppe (IMA) und den 4. Bericht der IMA ``CO{sub 2}-Reduktion``. (orig./SR)

Effect of selective catalytic reduction (SCR) on fine particle emission from two coal-fired power plants in China

Science.gov (United States)

Li, Zhen; Jiang, Jingkun; Ma, Zizhen; Wang, Shuxiao; Duan, Lei

2015-11-01

Nitrogen oxides (NOx) emission abatement of coal-fired power plants (CFPPs) requires large-scaled installation of selective catalytic reduction (SCR), which would reduce secondary fine particulate matter (PM2.5) (by reducing nitrate aerosol) in the atmosphere. However, our field measurement of two CFPPs equipped with SCR indicates a significant increase of SO42- and NH4+ emission in primary PM2.5, due to catalytic enhancement of SO2 oxidation to SO3 and introducing of NH3 as reducing agent. The subsequent formation of (NH4)2SO4 or NH4HSO4 aerosol is commonly concentrated in sub-micrometer particulate matter (PM1) with a bimodal pattern. The measurement at the inlet of stack also showed doubled primary PM2.5 emission by SCR operation. This effect should therefore be considered when updating emission inventory of CFPPs. By rough estimation, the enhanced primary PM2.5 emission from CFPPs by SCR operation would offset 12% of the ambient PM2.5 concentration reduction in cities as the benefit of national NOx emission abatement, which should draw attention of policy-makers for air pollution control.

For a better control of the greenhouse gases emissions of the international maritime and aerial baggage holds: evaluation and possible actions; Pour une maitrise des emissions de gaz a effet de serre des soutes internationales aeriennes et maritimes: constat et actions possibles

Energy Technology Data Exchange (ETDEWEB)

Sassi, O. [Ecole Nationale des Ponts et Chaussees, 77 - Marne la Vallee (France)

2003-07-01

The greenhouse gases emissions resulting from the aerial and marine baggage holds, are not taken into account in the national objectives of greenhouse gases reduction, defined by the Kyoto protocol. Thus they have to be controlled separately by each country concerned by the Kyoto protocol and urgent actions to reduce the greenhouse gases emissions are necessary. This study brings in first parts information on the context (legislation, traffic), the emission inventories and the options of allocation. It proposes then control methods and analyzes the possible measures. (A.L.B.)

Black carbon emission reduction strategies in healthcare industry for effective global climate change management.

Science.gov (United States)

Raila, Emilia Mmbando; Anderson, David O

2017-04-01

Climate change remains one of the biggest threats to life on earth to date with black carbon (BC) emissions or smoke being the strongest cause after carbon dioxide (CO 2 ). Surprisingly, scientific evidence about black carbon emissions reduction in healthcare settings is sparse. This paper presents new research findings on the reduction of black carbon emissions from an observational study conducted at the UN Peacekeeping Operations (MINUSTAH) in Haiti in 2014. Researchers observed 20 incineration cycles, 30 minutes for each cycle of plastic and cardboard sharps healthcare waste (HCW) containers ranged from 3 to 14.6 kg. The primary aim was to determine if black carbon emissions from healthcare waste incineration can be lowered by mainstreaming the use of cardboard sharps healthcare waste containers instead of plastic sharps healthcare waste containers. Similarly, the study looks into whether burning temperature was associated with the smoke levels for each case or not. Independent samples t-tests demonstrated significantly lower black carbon emissions during the incineration of cardboard sharps containers (6.81 ± 4.79% smoke) than in plastic containers (17.77 ± 8.38% smoke); a statistically significant increase of 10.96% smoke (95% Confidence Interval ( CI) [4.4 to 17.5% smoke], p = 0.003). Correspondingly, lower bottom burner temperatures occurred during the incineration of cardboard sharps containers than in plastic (95% Cl [16 to 126°C], p = 0.014). Finally, we expect the application of the new quantitative evidence to form the basis for policy formulation, mainstream the use of cardboard sharps containers and opt for non-incineration disposal technologies as urgent steps for going green in healthcare waste management.

Efficacité des néonicotinoïdes et des pyréthrinoïdes utilisés contre le ...

African Journals Online (AJOL)

Efficacité des néonicotinoïdes et des pyréthrinoïdes utilisés contre le foreur des tiges du cacaoyer ( Eulophonotus myrmeleon Felder : Lepidoptera, Cossidae). Implications dans la stratégie de protection de la cacaoculture en Côte d'Ivoire.

Cost-Sharing Contracts for Energy Saving and Emissions Reduction of a Supply Chain under the Conditions of Government Subsidies and a Carbon Tax

Directory of Open Access Journals (Sweden)

Yi Yuyin

2018-03-01

Full Text Available To study the cooperation of upstream and downstream enterprises of a supply chain in energy saving and emissions reduction, we establish a Stackelberg game model. The retailer moves first to decide a cost-sharing contract, then the manufacturer determines the energy-saving level, carbon-emission level, and wholesale price successively. In the end, the retailer determines the retail price. As a regulation, the government provides subsidies for energy-saving products, while imposing a carbon tax on the carbon emitted. The results show that (1 both the energy-saving cost-sharing (ECS and the carbon emissions reduction cost-sharing (CCS contracts are not the dominant strategy of the two parties by which they can facilitate energy savings and emissions reductions; (2 compared with single cost-sharing contracts, the bivariate cost-sharing (BCS contract for energy saving and emissions reduction is superior, although it still cannot realise prefect coordination of the supply chain; (3 government subsidy and carbon tax policies can promote the cooperation of both the upstream and downstream enterprises of the supply chain—a subsidy policy can always drive energy saving and emissions reductions, while a carbon tax policy does not always exert positive effects, as it depends on the initial level of pollution and the level of carbon tax; and (4 the subsidy policy reduces the coordination efficiency of the supply chain, while the influences of carbon tax policy upon the coordination efficiency relies on the initial carbon-emission level.

Ontario emissions trading code : emission reduction credit creation, recording and transfer rules, rules for renewable energy projects and conservation projects, and rules for the operation of the Ontario Emissions Trading Registry

International Nuclear Information System (INIS)

2001-12-01

Emissions trading has been an integral part of Ontario's air quality strategy since December 31, 2001. Ontario has adopted the 'cap, credit and trade' type of emissions trading system, a hybrid that takes the best features of pure 'cap-and-trade' and 'baseline-and-credit' type systems. It covers nitric oxide and sulphur dioxide. The Ontario Emissions Trading Code supplements Ontario Regulation 397/01 and sets out rules for renewable energy projects and conservation projects for which applications for emission allowances can be made. This Code describes the rules for the creation and transfer of emission reduction credits (ERCs). It also explains the rules for the operation of the registry that has been established to provide information to the public about the emissions trading program and records decisions about credit creation and credit and allowance retirement. 3 tabs

Nigerian forest communities act to reduce carbon emissions | CRDI ...

International Development Research Centre (IDRC) Digital Library (Canada)

8 juin 2016 ... The collaborative project between One Sky Canadian Institute for Sustainable Living and the African Integral Development Network assessed the perceptions of local communities about carbon emissions offset ... La majorité des habitants de l'Inde vivent dans des régions soumises à un stress hydrique.

NOx emission reduction from gas turbines

International Nuclear Information System (INIS)

Groppi, G.; Lietti, L.; Forzatti, P.

2001-01-01

NO x emissions from gas turbines are a serious environmental concern. Primary control technologies significantly reduce NO x formation, which however is still too high to match increasingly strict emission laws. Catalytic processes can provide lower NO x emissions both as primary and secondary control methods, but their economics should be carefully addressed [it

Coupling of CORINAIR Data to Cost-effective Emission Reduction Strategies Based on Critical Thresholds

International Nuclear Information System (INIS)

Johansson, M.; Guardans, R.; Lindstrom, M.

1999-12-01

This report summarizes the results of a workshop held by the participants in the EU/LIFE project: Coupling of CORINAIR data to cost-effective emission reduction strategies based on critical thresholds. The project participants include FEI, Filand, NERI, Denmark, CIEMAT, Spain, Lund Univ. Sweden. EMEP/MSC-W, UN/ECE/WGE/CCE and IIASA. The main objective of the project is to support national activities in assessing the spatial and temporal details of emissions of sulphur, nitrogen oxides, ammonium and volatile organic compounds and the impacts of acidification, eutrophication and ground level ozone. The reproject workshop enabled participants to report preliminary results of the two main tasks, emissions and impacts and to agree on common solutions for the final results. (Author) 11 refs

Aerosol exposure versus aerosol cooling of climate: what is the optimal emission reduction strategy for human health?

Directory of Open Access Journals (Sweden)

J. Löndahl

2010-10-01

Full Text Available Particles, climate change, and health have thought-provoking interactions. Air pollution is one of the largest environmental problems concerning human health. On the other hand, aerosol particles can have a cooling effect on climate and a reduction of those emissions may result in an increased temperature globally, which in turn may have negative health effects. The objective of this work was to investigate the "total health effects" of aerosol emissions, which include both exposure to particles and consequences for climate change initiated by particles. As a case study the "total health effect" from ship emissions was derived by subtracting the number of deaths caused by exposure with the estimated number of lives saved from the cooling effect of the emissions. The analysis showed that, with current level of scientific understanding, it could not be determined whether ship emissions are negative or positive for human health on a short time scale. This first attempt to approximate the combined effect of particle emissions on health shows that reductions of particulate air pollution will in some cases (black carbon have win-win effects on health and climate, but sometimes also cause a shift from particle exposure-related health effects towards an increasing risk of health consequences from climate change. Thus, measures to reduce aerosol emissions have to be coupled with climate change mitigation actions to achieve a full health benefit on a global level.

Santé des adolescents et des jeunes au Burkina Faso : état des ...

African Journals Online (AJOL)

Il s'est agi d'une étude évaluative ayant utilisé une revue documentaire associée à une interview des acteurs clés et un atelier de validation et d'identification des interventions pertinentes pour un plan stratégique national. La situation de la santé des adolescents et des jeunes est caractérisée par des grossesses précoces ...

La fabrique des sciences des institutions aux pratiques

CERN Document Server

Benninghoff, Martin; Crettaz von Roten, Fabienne; Merz, Martina

2006-01-01

Aujourd'hui, les façons de produire, d'organiser, d'évaluer et d'utiliser les savoirs sont en profond débat. De plus en plus, l'Etat, la société civile et l'économie tentent d'influencer les activités des universités et des laboratoires de recherche. Ces développements mettent à l'épreuve tout à la fois les fondements des systèmes d'enseignement supérieur et de recherche, l'autonomie des institutions scientifiques, la définition des frontières des savoirs et l'acceptation des sciences. Dans des contextes suisses et européens, cet ouvrage s'intéresse aux manières dont les sciences et les technologies sont fabriquées, en analysant leurs institutions et les pratiques. A partir d'une approche relationnelle, les sciences et les technologies sont conçues comme des phénomènes profondément sociaux, culturels et politiques. Une telle démarche déstabilise les visions parfois idéalisées et stéréotypées de la construction des savoirs. Des études de cas détaillées décrivent des phénomè...

Stabilisation goals for concentrations of climate-relevant gaseous emissions: Effects and emission pathways. Final report; Stabilisierungsziele fuer Treibhausgaskonzentrationen: Eine Abschaetzung der Auswirkungen und der Emissionspfade. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Onigkeit, J.; Alcamo, J.; Kaspar, F.; Roesch, T.

2000-04-01

Two different stabilisation goals were assumed, i.e. 550 ppm and 450 ppm of carbon dioxide. First, the global anthropogenic carbon dioxide emissions were calculated that are permissible to reach these goals. Secondly, the global and regional environmental effects of these concentration goals were assessed. In this, carbon dioxide, nitric oxides and methane emissions from power generation, industry and agriculture were considered. Apart from an investigation of the global reduction strategies required, a key was developed for sharing the global reduction loads between Annex B countries and non-Annex B countries. To reach a stable concentration of 550 ppm carbon dioxide in the atmosphere, the global anthropogenic carbon dioxide emissions per annum may increase slightly until 2030 but must be lowered to the 1990 level by 2100. In the case of 450 ppm, the 1990 level must even be halved by 2100. The consequences of climate change for agriculture, natural vegetation, availability of water, and sea levels were investigated in consideration of regional variations in carbon dioxide emissions and emission reduction measures. In spite of extensive emission control, the area of reduced agricultural productivity will grow rapidly in both cases, and natural vegetation will be endangered, although with strong regional variations. [German] Ausgehend von zwei langfristigen Klimaschutzzielen (Stabilisierung der atmosphaerischen CO{sub 2}-Konzentration bei 550 ppm und bei 450 ppm) wurde mit Hilfe des IMAGE 2.1 Modells: (1) Eine Berechnung der globalen anthropogenen Treibhausgasemissionen durchgefuehrt, die zwischen 1990 und 2100 erlaubt sind, um diese Konzentrationsziele zu erreichen. (2) Wurde eine Abschaetzung der globalen und regionalen Umweltauswirkungen durch den Klimawandel durchgefuehrt, der mit diesen Konzentrationszielen einhergeht. Bei der Analyse wurden CO{sub 2}-, N{sub 2}O- und CH{sub 4} Emissionen aus dem Energie/Industrie- und dem landwirtschaftlichen Sektor