Efficient and environmental-friendly dehydration of fructose to 5-hydroxymethyl-2-furfural in water under high pressure of CO2

NARCIS (Netherlands)

Motokucho, Suguru; Morikawa, Hiroshi; Nakatani, Hisayuki; Noordover, Bart A.J.

2016-01-01

To develop reaction systems of chemical conversion of biomass, fructose was heated in an aqueous medium under pressurized CO2, which caused in situ generation of carbonic acid. It gave 5-hydroxymethyl-2-furfural (HMF) as a dehydration product in good yields. The maximum yield of HMF was 92% in the

Organocatalytic Upgrading of Furfural and 5-Hydroxymethyl Furfural to C10 and C12 Furoins with Quantitative Yield and Atom-Efficiency

Science.gov (United States)

Zang, Hongjun; Chen, Eugene Y. X.

2015-01-01

There is increasing interest in the upgrading of C5 furfural (FF) and C6 5-hydroxymethyl furfural (HMF) into C10 and C12 furoins as higher energy-density intermediates for renewable chemicals, materials, and biofuels. This work utilizes the organocatalytic approach, using the in situ generated N,S-heterocyclic carbene catalyst derived from thiazolium ionic liquids (ILs), to achieve highly efficient self-coupling reactions of FF and HMF. Specifically, variations of the thiazolium IL structure have led to the most active and efficient catalyst system of the current series, which is derived from a new thiazolium IL carrying the electron-donating acetate group at the 5-ring position. For FF coupling by this IL (0.1 mol %, 60 °C, 1 h), when combined with Et3N, furoin was obtained in >99% yield. A 97% yield of the C12 furoin was also achieved from the HMF coupling by this catalyst system (10 mol % loading, 120 °C, 3 h). On the other hand, the thiazolium IL bearing the electron-withdrawing group at the 5-ring position is the least active and efficient catalyst. The mechanistic aspects of the coupling reaction by the thiazolium catalyst system have also been examined and a mechanism has been proposed. PMID:25830482

Organocatalytic Upgrading of Furfural and 5-Hydroxymethyl Furfural to C10 and C12 Furoins with Quantitative Yield and Atom-Efficiency

Directory of Open Access Journals (Sweden)

Hongjun Zang

2015-03-01

Full Text Available There is increasing interest in the upgrading of C5 furfural (FF and C6 5-hydroxymethyl furfural (HMF into C10 and C12 furoins as higher energy-density intermediates for renewable chemicals, materials, and biofuels. This work utilizes the organocatalytic approach, using the in situ generated N,S-heterocyclic carbene catalyst derived from thiazolium ionic liquids (ILs, to achieve highly efficient self-coupling reactions of FF and HMF. Specifically, variations of the thiazolium IL structure have led to the most active and efficient catalyst system of the current series, which is derived from a new thiazolium IL carrying the electron-donating acetate group at the 5-ring position. For FF coupling by this IL (0.1 mol %, 60 °C, 1 h, when combined with Et3N, furoin was obtained in >99% yield. A 97% yield of the C12 furoin was also achieved from the HMF coupling by this catalyst system (10 mol % loading, 120 °C, 3 h. On the other hand, the thiazolium IL bearing the electron-withdrawing group at the 5-ring position is the least active and efficient catalyst. The mechanistic aspects of the coupling reaction by the thiazolium catalyst system have also been examined and a mechanism has been proposed.

Photoassist-phosphorylated TiO2 as a catalyst for direct formation of 5-(hydroxymethyl)furfural from glucose.

Science.gov (United States)

Hattori, Masashi; Kamata, Keigo; Hara, Michikazu

2017-02-01

Photo-assisted phosphorylation of an anatase TiO 2 catalyst was examined to improve its catalytic performance for the direct production of 5-(hydroxymethyl)furfural (HMF), a versatile chemical platform, from glucose. In phosphorylation based on simple esterification between phosphoric acid and surface OH groups on anatase TiO 2 with water-tolerant Lewis acid sites, the density of phosphates immobilized on TiO 2 is limited to 2 phosphates nm -2 , which limits selective HMF production. Phosphorylation of the TiO 2 surface under fluorescent light irradiation increases the surface phosphate density to 50%, which is higher than the conventional limit, thus preventing the adsorption of hydrophilic glucose molecules on TiO 2 and resulting in a more selective HMF production over photoassist-phosphorylated TiO 2 .

Effects of 5-hydroxymethyl-2-furfural on the volume and membrane permeability of red blood cells from patients with sickle cell disease

Science.gov (United States)

Hannemann, Anke; Cytlak, Urszula M; Rees, David C; Tewari, Sanjay; Gibson, John S

2014-01-01

The heterocyclic aldehyde 5-hydroxymethyl-2-furfural (5HMF) interacts allosterically with the abnormal form of haemoglobin (Hb), HbS, in red blood cells (RBCs) from patients with sickle cell disease (SCD), thereby increasing oxygen affinity and decreasing HbS polymerization and RBC sickling during hypoxia. We hypothesized that should 5HMF also inhibit the main cation pathways implicated in the dehydration of RBCs from SCD patients – the deoxygenation-induced cation pathway (Psickle), the Ca2+-activated K+ channel (the Gardos channel) and the K+–Cl− cotransporter (KCC) – it would have a synergistic effect in protection against sickling, directly through interacting with HbS, and indirectly through maintaining hydration and reducing [HbS]. This study was therefore designed to investigate the effects of 5HMF on RBC volume and K+ permeability in vitro. 5HMF markedly reduced the deoxygenation-induced dehydration of RBCs whether in response to maintained deoxygenation or to cyclical deoxygenation/re-oxygenation. 5HMF was found to inhibit Psickle, an effect which correlated with its effects on sickling. Deoxygenation-induced activation of the Gardos channel and exposure of phosphatidylserine were also inhibited, probably indirectly via reduced entry of Ca2+ through the Psickle pathway. Effects of 5HMF on KCC were more modest with a slight inhibition in N-ethylmaleimide (NEM, 1 mm)-treated RBCs and stimulation in RBCs untreated with NEM. These findings support the hypothesis that 5HMF may also be beneficial through effects on RBC ion and water homeostasis. PMID:25015917

Effects of 5-hydroxymethyl-2-furfural on the volume and membrane permeability of red blood cells from patients with sickle cell disease.

Science.gov (United States)

Hannemann, Anke; Cytlak, Urszula M; Rees, David C; Tewari, Sanjay; Gibson, John S

2014-09-15

The heterocyclic aldehyde 5-hydroxymethyl-2-furfural (5HMF) interacts allosterically with the abnormal form of haemoglobin (Hb), HbS, in red blood cells (RBCs) from patients with sickle cell disease (SCD), thereby increasing oxygen affinity and decreasing HbS polymerization and RBC sickling during hypoxia. We hypothesized that should 5HMF also inhibit the main cation pathways implicated in the dehydration of RBCs from SCD patients - the deoxygenation-induced cation pathway (Psickle), the Ca(2+)-activated K(+) channel (the Gardos channel) and the K(+)-Cl(-) cotransporter (KCC) - it would have a synergistic effect in protection against sickling, directly through interacting with HbS, and indirectly through maintaining hydration and reducing [HbS]. This study was therefore designed to investigate the effects of 5HMF on RBC volume and K(+) permeability in vitro. 5HMF markedly reduced the deoxygenation-induced dehydration of RBCs whether in response to maintained deoxygenation or to cyclical deoxygenation/re-oxygenation. 5HMF was found to inhibit Psickle, an effect which correlated with its effects on sickling. Deoxygenation-induced activation of the Gardos channel and exposure of phosphatidylserine were also inhibited, probably indirectly via reduced entry of Ca(2+) through the Psickle pathway. Effects of 5HMF on KCC were more modest with a slight inhibition in N-ethylmaleimide (NEM, 1 mm)-treated RBCs and stimulation in RBCs untreated with NEM. These findings support the hypothesis that 5HMF may also be beneficial through effects on RBC ion and water homeostasis. © 2014 The Authors. The Journal of Physiology © 2014 The Physiological Society.

olor changes and 5-hydroxymethyl furfural formation in zile pekmezi during storage

Directory of Open Access Journals (Sweden)

Tosun, Ilkay

2004-09-01

Full Text Available Zile pekmezi (white hard pekmez is a traditional Turkish food which is produced from grape juice. Color, flavour and 5-hydroxymethyl furfural (HMF contents are the most important quality parameters in Zile pekmezi. Browning is the most common quality problem in pekmez. In this study, reaction orders, rate constants and activation energies were evaluated for HMF formation and color difference ( ? E variation in Zile pekmezi stored at 55, 65 and 75 °C over 9 days. The results indicated that HMF formation and ?E variation during thermal processing of Zile pekmezi followed zero order reaction kinetics at 55, 65 and 75 °C . Calculated activation energy for HMF and ?E were 158.63 kJ mol-1 and 40.04 kJ mol-1, respectively.El Zile pekmezi (pekmez duro blanco es un alimento turco tradicional que se produce a partir del zumo del uva. El color, el sabor y el contenido en 5-hidroximetilfurfural (HMF son los parámetros de calidad más importantes en el Zile pekmezi. El pardeaminto es el problema más común que afecta a la calidad del pekmez. En este estudio se evalúa la cinética de formación del HFM determinándose los ordenes de reacción, las constantes de formación y la energía de activación así como las variaciones en las diferencias de color (?E en Zile Pekmezi, almacenado a 55, 65 y 75 °C durante 9 días. Los resultados indicaron que la formación de HMF y la variación del color durante el proceso termal del Zile pekmezi siguieron una cinética de orden cero. Las energías de activación calculadas para HMF y el ?E fueron de 158.63 kJ mol-1 y 40.04 kJ mol-1, respectivamente.

Method to produce furandicarboxylic acid (FDCA) from 5-hydroxymethylfurfural (HMF)

Science.gov (United States)

Dumesic, James A.; Motagamwala, Ali Hussain

2017-04-11

A process to produce furandicarboxylic acid (FDCA). The process includes the steps of reacting a C6 sugar-containing reactant in a reaction solution comprising a first organic solvent selected from the group consisting of beta-, gamma-, and delta-lactones, hydrofurans, hydropyrans, and combinations thereof, in the presence of an acid catalyst for a time and under conditions wherein at least a portion of the C6 sugar present in the reactant is converted to 5-(hydroxymethyl)furfural (HMF); oxidizing the HMF into FDCA with or without separating the HMF from the reaction solution; and extracting the FDCA by adding an aprotic organic solvent having a dipole moment of about 1.0 D or less to the reaction solution.

Aerobic Oxidation of 5-(Hydroxymethyl)furfural Cyclic Acetal Enables Selective Furan-2,5-dicarboxylic Acid Formation with CeO2 -Supported Gold Catalyst.

Science.gov (United States)

Kim, Minjune; Su, Yaqiong; Fukuoka, Atsushi; Hensen, Emiel J M; Nakajima, Kiyotaka

2018-05-14

The utilization of 5-(hydroxymethyl)furfural (HMF) for the large-scale production of essential chemicals has been largely limited by the formation of solid humin as a byproduct, which prevents the operation of stepwise batch-type and continuous flow-type processes. The reaction of HMF with 1,3-propanediol produces an HMF acetal derivative that exhibits excellent thermal stability. Aerobic oxidation of the HMF acetal with a CeO 2 -supported Au catalyst and Na 2 CO 3 in water gives a 90-95 % yield of furan 2,5-dicarboxylic acid, an increasingly important commodity chemical for the biorenewables industry, from concentrated solutions (10-20 wt %) without humin formation. The six-membered acetal ring suppresses thermal decomposition and self-polymerization of HMF in concentrated solutions. Kinetic studies supported by DFT calculations identify two crucial steps in the reaction mechanism, that is, the partial hydrolysis of the acetal into 5-formyl-2-furan carboxylic acid involving OH - and Lewis acid sites on CeO 2 , and subsequent oxidative dehydrogenation of the in situ generated hemiacetal involving Au nanoparticles. These results represent a significant advance over the current state of the art, overcoming an inherent limitation of the oxidation of HMF to an important monomer for biopolymer production. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Porous nitrogen-enriched carbonaceous material from marine waste: chitosan-derived layered CNX catalyst for aerial oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid

Science.gov (United States)

Chitosan derived porous layered nitrogen-enriched carbonaceous CNx catalyst (PLCNx) has been synthesized from marine waste and its use demonstrated in a metal-free heterogeneous selective oxidation of 5-hydroxymethyl-furfural (HMF) to 2,5-furandicarboxylic acid (FDCA) using aeria...

[Rapid screening and quality evaluation for the harmful substance 5-hydroxymethyl furfural in commercially available traditional Chinese medicine injection using LC-MS/MS method].

Science.gov (United States)

Zang, Qing-ce; He, Jing-jing; Bai, Jin-fa; Zheng, Ya-jie; Zhang, Rui-ping; Li, Tie-gang; Wang, Zhong-hua; He, Jiu-ming; Abliz, Zeper

2013-11-01

To screen the harmful substance 5-hydroxymethyl furfural content in commercially available traditional Chinese medicine injection which are commonly used, and to preliminarily evaluate the quality of these injections, 5-hydroxymethyl furfural was taken as an index. The contents of 5-hydroxymethyl furfural in 56 samples which consist of 23 kinds of traditional Chinese medicine injections and glucose injection were determined using LC-MS/MS, and 5-hydroxymethyl furfural was detected in 52 of these samples. The minimal content was 0.0038 microg x L(-1) and the maximum content was 1420 microg x mL(-1). The contents of 5-hydroxymethyl furfural were significantly different in traditional Chinese medicine injection which came from different kinds, manufacturers or batches. The results showed the quality difference of commercially available traditional Chinese medicine injection is significant taking 5-hydroxymethyl furfural content as assessment index. More attention should be paid to the safety of 5-hydroxymethyl furfural in traditional Chinese medicine injection, and unified limitation standard should be set to improve medication safety of traditional Chinese medicine injection.

Effect of Sodium Chloride on α-Dicarbonyl Compound and 5-Hydroxymethyl-2-furfural Formations from Glucose under Caramelization Conditions: A Multiresponse Kinetic Modeling Approach.

Science.gov (United States)

Kocadağlı, Tolgahan; Gökmen, Vural

2016-08-17

This study aimed to investigate the kinetics of α-dicarbonyl compound formation in glucose and glucose-sodium chloride mixture during heating under caramelization conditions. Changes in the concentrations of glucose, fructose, glucosone, 1-deoxyglucosone, 3-deoxyglucosone, 3,4-dideoxyglucosone, 5-hydroxymethyl-2-furfural (HMF), glyoxal, methylglyoxal, and diacetyl were determined. A comprehensive reaction network was built, and the multiresponse model was compared to the experimentally observed data. Interconversion between glucose and fructose became 2.5 times faster in the presence of NaCl at 180 and 200 °C. The effect of NaCl on the rate constants of α-dicarbonyl compound formation varied across the precursor and the compound itself and temperature. A decrease in rate constants of 3-deoxyglucosone and 1-deoxyglucosone formations by the presence of NaCl was observed. HMF formation was revealed to be mainly via isomerization to fructose and dehydration over cyclic intermediates, and the rate constants increase 4-fold in the presence of NaCl.

Aerobic Oxidation of 5-(Hydroxymethyl)furfural in Ionic Liquids with Solid Ruthenium Hydroxide Catalysts

DEFF Research Database (Denmark)

Ståhlberg, Tim Johannes Bjarki; Eyjolfsdottir, Ester; Gorbanev, Yury

2012-01-01

The aerobic oxidation of 5-(hydroxymethyl)furfural was investigated over solid ruthenium hydroxide catalysts in ionic liquids at elevated temperatures and pressures. Several different catalyst supports were tested in combination with various ionic liquids. The best result was obtained in [EMIm...

Protein Engineering of GRE2 from Saccharomyces cerevisiae for Enhanced Detoxification of 5-Hydroxymethyl Furfural

Science.gov (United States)

Furfural and 5-hydroxymethylfurfural (HMF) are representative inhibitors generated by lignocellulosic biomass pretreatment such as dilute acid hydrolysis that inhibit microbial growth and subsequent fermentation. It is possible to in situ detoxify these inhibitory compounds using tolerant Saccharomy...

Effects of L-cysteine and N-acetyl-L-cysteine on 4-hydroxy-2, 5-dimethyl-3(2H)-furanone (furaneol), 5-(hydroxymethyl)furfural, and 5-methylfurfural formation and browning in buffer solutions containing either rhamnose or glucose and arginine.

Science.gov (United States)

Haleva-Toledo, E; Naim, M; Zehavi, U; Rouseff, R L

1999-10-01

Solutions of L-cysteine (Cys) and N-acetyl-L-cysteine (AcCys), containing glucose or rhamnose, with or without arginine, were buffered to pH 3, 5, and 7 and incubated at 70 degrees C for 48 h. Cys and AcCys inhibited the formation of (hydroxymethyl)furfural (HMF) from glucose and methylfurfural (MF) from rhamnose under acidic conditions. AcCys inhibited the accumulation of 4-hydroxy-2, 5-dimethyl- 3(2H)-furanone (DMHF, Furaneol) from rhamnose, but Cys, under our experimental conditions, enhanced Furaneol accumulation from rhamnose. Cys and AcCys reacted directly with Furaneol but not with HMF or MF. Both Cys and AcCys inhibited nonenzymatic browning at pH 7. At pH 3, however, Cys reacted with both glucose and rhamnose to produce unidentified compounds that increased the visible absorbency.

Kinetic Resolution of sec-Thiols via Enantioselective Oxidation with Rationally Engineered 5-(Hydroxymethyl)furfural Oxidase

NARCIS (Netherlands)

Pickl, Mathias; Swoboda, Alexander; Romero, Elvira; Winkler, Christoph; Binda, Claudia; Mattevi, Andrea; Faber, Kurt; Fraaije, Marco

2018-01-01

Various flavoprotein oxidases were recently shown to oxidize prim-thiols. Here we extend this reactivity towards sec-thiols via structure-guided engineering of 5-(hydroxymethyl)furfural oxidase (HMFO). The variants obtained were employed for the oxidative kinetic resolution of rac-sec-thiols

Conversion and assimilation of furfural and 5-(hydroxymethylfurfural by Pseudomonas putida KT2440

Directory of Open Access Journals (Sweden)

Michael T. Guarnieri

2017-06-01

Full Text Available The sugar dehydration products, furfural and 5-(hydroxymethylfurfural (HMF, are commonly formed during high-temperature processing of lignocellulose, most often in thermochemical pretreatment, liquefaction, or pyrolysis. Typically, these two aldehydes are considered major inhibitors in microbial conversion processes. Many microbes can convert these compounds to their less toxic, dead-end alcohol counterparts, furfuryl alcohol and 5-(hydroxymethylfurfuryl alcohol. Recently, the genes responsible for aerobic catabolism of furfural and HMF were discovered in Cupriavidus basilensis HMF14 to enable complete conversion of these compounds to the TCA cycle intermediate, 2-oxo-glutarate. In this work, we engineer the robust soil microbe, Pseudomonas putida KT2440, to utilize furfural and HMF as sole carbon and energy sources via complete genomic integration of the 12 kB hmf gene cluster previously reported from Burkholderia phytofirmans. The common intermediate, 2-furoic acid, is shown to be a bottleneck for both furfural and HMF metabolism. When cultured on biomass hydrolysate containing representative amounts of furfural and HMF from dilute-acid pretreatment, the engineered strain outperforms the wild type microbe in terms of reduced lag time and enhanced growth rates due to catabolism of furfural and HMF. Overall, this study demonstrates that an approach for biological conversion of furfural and HMF, relative to the typical production of dead-end alcohols, enables both enhanced carbon conversion and substantially improves tolerance to hydrolysate inhibitors. This approach should find general utility both in emerging aerobic processes for the production of fuels and chemicals from biomass-derived sugars and in the biological conversion of high-temperature biomass streams from liquefaction or pyrolysis where furfural and HMF are much more abundant than in biomass hydrolysates from pretreatment.

5-(Chloromethyl)furfural is the New HMF: Functionally Equivalent But More Practical in Terms of its Production From Biomass.

Science.gov (United States)

Mascal, Mark

2015-10-26

5-(Chloromethyl)furfural (CMF) is a disruptive innovation in the biorefinery. Chemically, it is at least as versatile as the well-known HMF but, unlike HMF, it is accessible in high yield directly from cellulosic biomass due to its lipophilicity and stability under acidic conditions, which facilitate isolation. It has a rich derivative chemistry that includes biofuels, renewable polymers, specialty chemicals, and value-added agrochemical and pharmaceutical products. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Bis-sulfonic Acid Ionic Liquids for the Conversion of Fructose to 5-Hydroxymethyl-2-furfural

Directory of Open Access Journals (Sweden)

Sangho Koo

2012-10-01

Full Text Available Homogenous bis-sulfonic acid ionic liquids (1 mol equiv. in DMSO (10 mol equiv. at 100 °C efficiently mediated the conversion of D-fructose into 5-hydroxymethyl-2-furfural in 75% isolated yield, which was roughly a 10% increment compared to the case of the mono-sulfonic acid ionic liquids.

Investigation on influencing factors of 5-HMF content in Schisandra *

OpenAIRE

Xu, Qing; Li, Ying-hua; Lü, Xiu-yang

2007-01-01

In order to investigate the influencing factors of 5-hydroxymethyl-2-furaldehyde (5-HMF) content in Schisandra, confirm the theory of 5-HMF deriving mainly from Schisandra processing course, and give some suggestions about the Schisandra processing method, the 5-HMF contents in decoctions of Schisandra under different heating temperature, decocting time, soaking time, processing methods and treatment with different solvents before decocting the Schisandra were measured by RP-HPLC method. The ...

Impact of flavour solvent (propylene glycol or triacetin) on vanillin, 5-(hydroxymethyl)furfural, 2,4-decadienal, 2,4-heptadienal, structural parameters and sensory perception of shortcake biscuits over accelerated shelf life testing.

Science.gov (United States)

Yang, Ni; Hort, Joanne; Linforth, Robert; Brown, Keith; Walsh, Stuart; Fisk, Ian D

2013-11-15

The influence of choice of flavour solvent, propylene glycol (PG) or triacetin (TA), was investigated during accelerated shelf life (ASL) testing of shortcake biscuits. Specifically, the differential effect on the stability of added vanillin, the natural baked marker compound 5-(hydroxymethyl)furfural (HMF), specific markers of oxidative rancidity (2,4-decadienal, 2,4-heptadienal), and the structural parameters of hardness and fracturability. Significantly more HMF was formed during baking of biscuits prepared with TA; these biscuits were also more stable to oxidative degradation and loss of vanillin during ageing than biscuits prepared with PG. Fresh TA biscuits were significantly more brittle than fresh PG biscuits. There was no impact of solvent choice on hardness. Sensory evaluation of hardness, vanilla flavour and oily off-note was tested during ASL testing. There was no significant impact of storage on sensory ratings for either the PG or TA biscuits. Copyright © 2013 Elsevier Ltd. All rights reserved.

Analysis of biodegradation performance of furfural and 5-hydroxymethylfurfural by Amorphotheca resinae ZN1

Science.gov (United States)

2014-01-01

Background Furfural and 5-hydroxymethylfurfural (HMF) are the degradation products of lignocellulose during pretreatment operations and significantly inhibit the consequent enzymatic hydrolysis and fermentation processes. The biodetoxification fungus Amorphotheca resinae ZN1 had demonstrated its excellent capacity on degrading lignocellulose derived inhibitors and helped the fermentation processes to achieve high yield of ethanol and biochemicals. Analysis of the biological degradation performance of furfural and HMF by A. resinae ZN1 will provide essential information for their fast and complete removal from the pretreated lignocellulose materials and facilitate the consequent ethanol fermentation. Results The degradation performance of furfural and HMF by A. resinae ZN1 was investigated by capturing intermediate metabolic products at various culture conditions. A. resinae ZN1 converts furfural/HMF into furfuryl/HMF alcohols and furoic/HMF acids simultaneously at aerobic condition, and only the corresponding furfuryl/HMF alcohols are obtained at anaerobic condition. The existence of glucose accelerates the degradation rate of furfural and HMF by A. resinae ZN1 and the cell mass growth rate aerobically. Remarkably, glucose is not consumed before furfural or HMF is degraded to a low threshold concentration. The finding suggests that furfural or HMF has a substrate priority of utilization by A. resinae ZN1 than glucose. This property may help the detoxification of furfural and HMF to be operated without consuming glucose. Conclusions The biological degradation performance of furfural and HMF by A. resinae ZN1 was investigated experimentally. Oxygen supply is important on the complete biodegradation of furfural and HMF by A. resinae ZN1. Furfural or HMF has the priority of substrate utilization than glucose by A. resinae ZN1. This study provided important information for detoxification enhancement and strain modification. PMID:24708699

5-HMF attenuates striatum oxidative damage via Nrf2/ARE signaling pathway following transient global cerebral ischemia.

Science.gov (United States)

Ya, Bai-Liu; Li, Hong-Fang; Wang, Hai-Ying; Wu, Fei; Xin, Qing; Cheng, Hong-Ju; Li, Wen-Juan; Lin, Na; Ba, Zai-Hua; Zhang, Ru-Juan; Liu, Qian; Li, Ya-Nan; Bai, Bo; Ge, Feng

2017-01-01

Recent studies have shown 5-hydroxymethyl-2-furfural (5-HMF) has favorable biological effects, and its neuroprotection in a variety of neurological diseases has been noted. Our previous study showed that treatment of 5-HMF led to protection against permanent global cerebral ischemia. However, the underlying mechanisms in cerebral ischemic injury are not fully understood. This study was conducted to investigate the neuroprotective effect of 5-HMF and elucidate the nuclear factor erythroid 2-related factor 2 (Nrf2)/antioxidant response element (ARE) signaling pathway mechanism in the striatum after transient global cerebral ischemia. C57BL/6 mice were subjected to bilateral common carotid artery occlusion for 20 min and sacrificed 24 h after reperfusion. 5-HMF (12 mg/kg) or an equal volume of vehicle was intraperitoneally injected 30 min before ischemia and 5 min after the onset of reperfusion. At 24 h after reperfusion, neurological function was evaluated by neurological disability status scale, locomotor activity test and inclined beam walking test. Histological injury of the striatum was observed by cresyl violet staining and terminal deoxynucleotidyl transferase (TdT)-mediated dNTP nick end labeling (TUNEL) staining. Oxidative stress was evaluated by the carbonyl groups introduced into proteins, and malondialdehyde (MDA) levels. An enzyme-linked immunosorbent assay (ELISA)-based measurement was used to detect Nrf2 DNA binding activity. Nrf2 and its downstream ARE pathway protein expression such as heme oxygenase-1, NAD (P)H:quinone oxidoreductase 1, glutamate-cysteine ligase catalytic subunit and glutamate-cysteine ligase modulatory subunit were detected by western blot. Our results showed that 5-HMF treatment significantly ameliorated neurological deficits, reduced brain water content, attenuated striatum neuronal damage, decreased the carbonyl groups and MDA levels, and activated Nrf2/ARE signaling pathway. Taken together, these results demonstrated that

Effect of cellulosic sugar degradation products (furfural and hydroxymethylfurfural) on acetone-butanol-ethanol (ABE) fermentation using Clostridium beijerinckii P260

Science.gov (United States)

Studies were performed to identify chemicals present in wheat straw hydrolysate (WSH) that enhance acetone butanol ethanol (ABE) productivity. These chemicals were identified as furfural and hydroxymethyl furfural (HMF). Control experiment resulted in the production of 21.09-21.66 gL**-1 ABE with a ...

Analisis Kadar HMF (Hidroxy Methyl Furfural pada Madu Bone

Directory of Open Access Journals (Sweden)

Zakaria Zakaria

2014-07-01

Full Text Available This study aimed to determine the concentration of HMF ((hydroxy methyl furfural in Bone honey. Regency Bone with 145.073 ha of forest, of area 4,559 km² honey potential for livestock development. The quality of honey is determined  from the nectar source, geographic location, and the processing technology. HMF concentration is one of the indicators in honey to determine the quality marker and freshness of honey. This research was done in three stages, namely the stage of sample preparation, extraction phase, and phase identification. Stages of sample preparation were performed to determine sampling locations, the determination of the location of the extraction and identification. Extraction is done in analytical chemistry laboratorium Science Faculty, Hasanuddin University. Honey samples were extracted with methanol. The identification process carried out in an integrated laboratory Department of Chemical Science Faculty of Hasanuddin University to obtain the data of UV-Vis, HPLC performed while the data in an integrated laboratory public health, Hasanuddin University. The results obtained by HPLC showed the data HMF concentration of 0.264 mg/kg, while the data obtained by UV-Vis HMF concentration of 0.230 mg/kg. Based on these data concluded that honey Bone has a good quality in terms of content HMF.

Over-expression of NADH-dependent oxidoreductase (fucO) for increasing furfural or 5-hydroxymethylfurfural tolerance

Science.gov (United States)

Miller, Elliot N.; Zhang, Xueli; Yomano, Lorraine P.; Wang, Xuan; Shanmugam, Keelnatham T.; Ingram, Lonnie O'Neal

2015-10-13

The subject invention pertains to the discovery that the NADH-dependent propanediol oxidoreductase (FucO) can reduce furfural. This allows for a new approach to improve furfural tolerance in bacterial and/or yeast cells used to produce desired products. Thus, novel biocatalysts (bacterial, fungal or yeast cells) exhibiting increased tolerance to furfural and 5-hydroxymethylfurfural (5-HMF) are provided as are methods of making and using such biocatalysts for the production of a desired product.

Content and evolution of potential furfural compounds in commercial milk-based infant formula powder after opening the packet.

Science.gov (United States)

Chávez-Servín, Jorge L; de la Torre Carbot, Karina; García-Gasca, Teresa; Castellote, Ana I; López-Sabater, M Carmen

2015-01-01

Potential furfural compounds were examined by RP-HPLC-DAD in 20 commercial milk-based powdered infant formula (IF) brands from local markets from Paris, France; DF, Mexico; Copenhagen, Denmark; England, UK; and Barcelona, Spain. We traced the evolution of these compounds after the packets had been opened at 0, 30 and 70 days of storage at room temperature (≈25 °C; minimum 23 °C and maximum 25.5 °C). All formula brands were analysed during the first 3-5 months of their shelf life. The mean values of all IFs for potential 5-hydroxymethyl-2-furaldehyde (HMF)+2-furaldehyde (F) were 1115.2 μg/100 g (just opened), 1157.6 μg/100 g (30 days) and 1344.5 μg/100 g of product (70 days). In general, slight increases of potential furfural contents were observed in most of the studied IFs, which suggests that the Maillard reaction increases after opening the packets. The main furfural compound found was HMF, as expected. The range of potential HMF consumed for an infant about 6 months old feeding only on formula was estimated between 0.63 mg and 3.25 mg per day. Copyright © 2014 Elsevier Ltd. All rights reserved.

Identification and Quantification of 5-Hydroxymethyl Furfural in Food Products

Directory of Open Access Journals (Sweden)

Maryam Jalili

2015-03-01

Full Text Available 5-Hydroxymethylfurfural (5-HMF is known as an indicator of quality deterioration in a wide range of foods. The current study covered 70 samples taken from domestically produced foods and drinks available on the Iranian markets (including honey, jam, fruit cakes tomato paste, ketchup, syrup, fruit juice, canned fruit, UHT milk, instant coffee and jelly powder. HMF levels were determined using high performance liquid chromatography (HPLC and UV detector. The mean recovery values ranged from 84.4 to 105.8%. Varying amounts (11.42-929 mg kg-1 of HMF were found in 48 out of 70 (87% analyzed samples. High levels of HMF were mainly found in commercial honey (20.55–928.96 mg kg-1, jams (51.10 to 245.97 mg kg-1, fruit cakes (nd-171.50 mg kg-1, and ketchup (32.70-72.19 mg kg-1. No HMF content was detected in UHT milk, instant coffee and jelly powder.

Pulsed addition of HMF and furfural to batch-grown xylose-utilizing Saccharomyces cerevisiae results in different physiological responses in glucose and xylose consumption phase

Science.gov (United States)

2013-01-01

Background Pretreatment of lignocellulosic biomass generates a number of undesired degradation products that can inhibit microbial metabolism. Two of these compounds, the furan aldehydes 5-hydroxymethylfurfural (HMF) and 2-furaldehyde (furfural), have been shown to be an impediment for viable ethanol production. In the present study, HMF and furfural were pulse-added during either the glucose or the xylose consumption phase in order to dissect the effects of these inhibitors on energy state, redox metabolism, and gene expression of xylose-consuming Saccharomyces cerevisiae. Results Pulsed addition of 3.9 g L-1 HMF and 1.2 g L-1 furfural during either the glucose or the xylose consumption phase resulted in distinct physiological responses. Addition of furan aldehydes in the glucose consumption phase was followed by a decrease in the specific growth rate and the glycerol yield, whereas the acetate yield increased 7.3-fold, suggesting that NAD(P)H for furan aldehyde conversion was generated by acetate synthesis. No change in the intracellular levels of NAD(P)H was observed 1 hour after pulsing, whereas the intracellular concentration of ATP increased by 58%. An investigation of the response at transcriptional level revealed changes known to be correlated with perturbations in the specific growth rate, such as protein and nucleotide biosynthesis. Addition of furan aldehydes during the xylose consumption phase brought about an increase in the glycerol and acetate yields, whereas the xylitol yield was severely reduced. The intracellular concentrations of NADH and NADPH decreased by 58 and 85%, respectively, hence suggesting that HMF and furfural drained the cells of reducing power. The intracellular concentration of ATP was reduced by 42% 1 hour after pulsing of inhibitors, suggesting that energy-requiring repair or maintenance processes were activated. Transcriptome profiling showed that NADPH-requiring processes such as amino acid biosynthesis and sulfate and

Mantıda Farklı Kurutma Yöntemlerinin Hidroksimetil Furfural (HMF Oluşumu ve Duyusal Kalite Üzerine Etkileri

Directory of Open Access Journals (Sweden)

Süleyman GÖKMEN

2016-09-01

Full Text Available Özet. Ülkemizde mantının kurutulmasında geleneksel sıcak hava yöntemleri kullanılmaktadır. Bu yöntemler üründe kalite kayıplarına neden olmaktadır. Bu nedenle kurutma işlemi için geleneksel tekniklere alternatif yöntemler araştırılmaktadır. Bu amaçla kullanılabilecek olan bir teknik infrared (IR kurutma prosesidir. Kurutma proseslerinde en önemli parametreler sıcaklık ve sıcaklığın ürün üzerine etkisidir. Sıcaklığın ürün üzerine olumsuz etkisini gösterebilecek maddelerden biri hidroksimetil furfural (HMF oluşumudur. HMF enzimatik olmayan esmerleşme reaksiyon ürünlerinden biridir. HMF miktarı arttıkça ürünün besin değerinde düşüşler meydana gelmektedir. Araştırmada, bu olumsuzlukları önlemek amacıyla mantının kurutulmasında geleneksel yönteme alternatif olarak 250 W IR kurutma yöntemi tek başına ve vakum kombinasyonu olarak uygulanmış, oluşan HMF miktarları ve ürün duyusal özellikleri araştırılmıştır. Vakumla kombine edilmiş 250 W IR kullanılarak kurutulan mantıların HMF miktarları geleneksel yönteme göre daha düşük ve duyusalkaliteleri daha yüksek bulunmuştur (P<0,01. Sonuç olarak, mantının endüstriyel üretiminde IR kurutma ve vakum uygulamasının kombine kullanımı gibi farklı kurutma metotlarının araştırılması gerektiği sonucuna varılmıştır.Anahtar Kelimeler: Mantı, HMF, infrared (IR kurutma, vakum kurutma, duyusal kaliteAbstract. Conventional hot-air drying methods are used in drying of mantı (stuffed pasta in Turkey. These methods cause quality losses in the product. Therefore search for alternative methods to the conventional drying has been underway. Infrared (IR drying process is an alternative technique for this purpose. The most important parameters in the drying processes are drying temperature and its effects on the product. Hydroxymethyl furfural (HMF formation is one of the indicators for illeffects of

Determination of the main impurities formed after acid hydrolysis of soybean extracts and the in vitro mutagenicity and genotoxicity studies of 5-ethoxymethyl-2-furfural.

Science.gov (United States)

Nemitz, Marina C; Picada, Jaqueline N; da Silva, Juliana; Garcia, Ana Letícia H; Papke, Débora K M; Grivicich, Ivana; Steppe, Martin; von Poser, Gilsane L; Teixeira, Helder F

2016-09-10

Soybean acid hydrolyzed extracts are raw-materials widely used for manufacturing of pharmaceuticals and cosmetics products due to their high content of isoflavone aglycones. In the present study, the main sugar degradation products 5-hydroxymethyl-2-furfural (HMF) and 5-ethoxymethyl-2-furfural (EMF) were quantitatively determined after acid hydrolysis of extracts from different soybean cultivars by a validated liquid chromatography method. The furanic compounds determined in samples cover the range of 0.16-0.21mg/mL and 0.22-0.33mg/mL for HMF and EMF, respectively. Complementarily, due to the scarce literature regarding the EMF toxicology, this study also assessed the EMF mutagenicity by the Salmonella/microsome test and genotoxicity by the comet assay. The results revealed that EMF did not show mutagenicity at the range of 50-5000μg/plate in S. typhimurium strains TA98, TA97a, TA100, TA102 and TA1535, but induced DNA damage in HepG2 cells at non-cytotoxic doses of 0.1-1.3mg/mL, mainly by oxidative stress mechanisms. Based on literature of HMF genotoxicity, and considering the EMF genotoxicity results herein shown, purification procedures to remove these impurities from extracts are recommended during healthcare products development to ensure the security of the products. Copyright © 2016 Elsevier B.V. All rights reserved.

Efficient catalytic system for the direct transformation of lignocellulosic biomass to furfural and 5-hydroxymethylfurfural.

Science.gov (United States)

Zhang, Luxin; Xi, Guoyun; Zhang, Jiaxin; Yu, Hongbing; Wang, Xiaochang

2017-01-01

A feasible approach was developed for the co-production of 5-hydroxymethylfurfural (5-HMF) and furfural from corncob via a new porous polytriphenylamine-SO 3 H (SPTPA) solid acid catalyst in lactone solvents. XRD, SEM, XPS, N 2 adsorption-desorption, elemental analysis, TG-DTA, acid-base titration and FTIR spectroscopy techniques were used to characterize the catalyst. This study demonstrates and optimizes the catalytic performance of SPTPA and solvent selection. SPTPA was found to exhibit superior catalytic ability in γ-valerolactone (GVL). Under the optimum reaction conditions, simultaneously encouraging yields of furfural (73.9%) and 5-HMF (32.3%) were achieved at 448K. The main advantages of this process include reasonable yields of both 5-HMF and furfural in the same reaction system, practical simplicity for the raw biomass utilization, and the use of a safe and environmentally benign solvent. Copyright © 2016 Elsevier Ltd. All rights reserved.

Kinetic Resolution of sec-Thiols by Enantioselective Oxidation with Rationally Engineered 5-(Hydroxymethyl)furfural Oxidase.

Science.gov (United States)

Pickl, Mathias; Swoboda, Alexander; Romero, Elvira; Winkler, Christoph K; Binda, Claudia; Mattevi, Andrea; Faber, Kurt; Fraaije, Marco W

2018-03-05

Various flavoprotein oxidases were recently shown to oxidize primary thiols. Herein, this reactivity is extended to sec-thiols by using structure-guided engineering of 5-(hydroxymethyl)furfural oxidase (HMFO). The variants obtained were employed for the oxidative kinetic resolution of racemic sec-thiols, thus yielding the corresponding thioketones and nonreacted R-configured thiols with excellent enantioselectivities (E≥200). The engineering strategy applied went beyond the classic approach of replacing bulky amino acid residues with smaller ones, as the active site was additionally enlarged by a newly introduced Thr residue. This residue established a hydrogen-bonding interaction with the substrates, as verified in the crystal structure of the variant. These strategies unlocked HMFO variants for the enantioselective oxidation of a range of sec-thiols. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Biomass conversion inhibitors furfural and 5-hydroxymethylfurfural induce formation of messenger RNP granules and attenuate translation activity in Saccharomyces cerevisiae.

Science.gov (United States)

Iwaki, Aya; Kawai, Takao; Yamamoto, Yosuke; Izawa, Shingo

2013-03-01

Various forms of stress can cause an attenuation of bulk translation activity and the accumulation of nontranslating mRNAs into cytoplasmic messenger RNP (mRNP) granules termed processing bodies (P-bodies) and stress granules (SGs) in eukaryotic cells. Furfural and 5-hydroxymethylfurfural (HMF), derived from lignocellulosic biomass, inhibit yeast growth and fermentation as stressors. Since there is no report regarding their effects on the formation of cytoplasmic mRNP granules, here we investigated whether furfural and HMF cause the assembly of yeast P-bodies and SGs accompanied by translational repression. We found that furfural and HMF cause the attenuation of bulk translation activity and the assembly of cytoplasmic mRNP granules in Saccharomyces cerevisiae. Notably, a combination of furfural and HMF induced the remarkable repression of translation initiation and SG formation. These findings provide new information about the physiological effects of furfural and HMF on yeast cells, and also suggest the potential usefulness of cytoplasmic mRNP granules as a warning sign or index of the deterioration of cellular physiological status in the fermentation of lignocellulosic hydrolysates.

Acquired tolerance and in situ detoxification of furfural and HMF through glucose metabolic pathways by Saccharomyces cerevisiae

Science.gov (United States)

Lignocellulosic biomass conversion inhibitors furfural and HMF inhibit microbial growth and interfere with subsequent fermentation of ethanol. Numerous yeast genes were found to be associated with the inhibitor tolerance. However, little is known about system mechanisms of the tolerance and detoxi...

Improved production of 2,5-furandicarboxylic acid by overexpression of 5-hydroxymethylfurfural oxidase and 5-hydroxymethylfurfural/furfural oxidoreductase in Raoultella ornithinolytica BF60.

Science.gov (United States)

Yuan, Haibo; Li, Jianghua; Shin, Hyun-Dong; Du, Guocheng; Chen, Jian; Shi, Zhongping; Liu, Long

2018-01-01

2,5-Furandicarboxylic acid (FDCA) is a promising bio-based building block and can be produced by biotransformation of 5-hydroxymethylfurfural (HMF). To improve the FDCA production, two genes-one encoding HMF oxidase (HMFO; from Methylovorus sp. strain MP688) and another encoding for HMF/Furfural oxidoreductase (HmfH; from Cupriavidus basilensis HMF14)-were introduced into Raoultella ornithinolytica BF60. The FDCA production in the engineered whole-cell biocatalyst increased from 51.0 to 93.6mM, and the molar conversion ratio of HMF to FDCA increased from 51.0 to 93.6%. Copyright © 2017 Elsevier Ltd. All rights reserved.

Roles of the Yap1 transcription factor and antioxidants in Saccharomyces cerevisiae's tolerance to furfural and 5-hydroxymethylfurfural, which function as thiol-reactive electrophiles generating oxidative stress.

Science.gov (United States)

Kim, Daehee; Hahn, Ji-Sook

2013-08-01

Development of the tolerance of Saccharomyces cerevisiae strains to furfural and 5-hydroxymethylfurfural (HMF) is an important issue for cellulosic ethanol production. Although furfural and HMF are known to induce oxidative stress, the underlying mechanisms are largely unknown. In this study, we show that both furfural and HMF act as thiol-reactive electrophiles, thus directly activating the Yap1 transcription factor via the H2O2-independent pathway, depleting cellular glutathione (GSH) levels, and accumulating reactive oxygen species in Saccharomyces cerevisiae. However, furfural showed higher reactivity than did HMF toward GSH in vitro and in vivo. In line with such toxic mechanisms, overexpression of YAP1(C620F), a constitutively active mutant of YAP1, and Yap1 target genes encoding catalases (CTA1 and CTT1) increased tolerance to furfural and HMF. However, increasing GSH levels by overexpression of genes for GSH biosynthesis (GSH1 and GLR1) or by the exogenous addition of GSH to the culture medium enhanced tolerance to furfural but not to HMF.

The ecotoxicogenomic assessment of soil toxicity associated with the production chain of 2,5-furandicarboxylic acid (FDCA), a candidate bio-based green chemical building block

NARCIS (Netherlands)

Chen, G.; van Straalen, N.M.; Roelofs, D.

2016-01-01

2,5-Furan dicarboxylic acid (FDCA) is one of the top-12 value-added chemicals derived from biomass that may serve as a 'green' substitute for terephthalic acid (TPA) in polyesters. FDCA can be synthesized chemically from 5-(hydroxymethyl)furfural (HMF), which is produced from fructose or glucose. To

Comparison of in vivo immunomodulatory effects of 5-hydroxymethylfurfural and 5, 5'-oxydimethylenebis (2-furfural).

Science.gov (United States)

Lin, Ni; Liu, Tiantian; Lin, Lin; Lin, Sheng; Zang, Qingce; He, Jiuming; Abliz, Zeper; Li, Chao; Wang, Aiping; Jin, Hongtao

2016-11-01

The standard of 5-Hydroxymethylfurfural (5-HMF) existed in dextrose injection as an inevitable by-product during high-temperature setrilization has been included in pharmacopoeias considering its hazardous effects on human health. We found that the concentrations of 5-HMF in some traditional Chinese medicine injections (TCMIs) far exceeded its limit in dextrose injection. Besides, we detected 5, 5'-Oxydimethylenebis (2-furfural) (OMBF) in those TCMIs containing high concentrations of 5-HMF. We investigated the in vivo immunomodulatory effects of 5-HMF and OMBF at three dose levels using the reporter antigen popliteal lymph node assay (RA-PLNA), which allows the straightforward examination and mechanistic study of immunotoxicity of low molecular weight compounds. We found that 5-HMF increased the production of IgG 2a and IFN-γ when co-injected with TNP-OVA, indicating its capability of providing a co-stimulatory signal to evoke a typical type-1 immune response. Compared with the 5-HMF, OMBF elevated the production of IgG 1 , IgG 2 , IL-4 and IFN-γ in response to both reporter antigens, suggesting that OMBF can act as a neo-antigen or neo-epitope to elicit a mixed type-1 and type-2 immune response. It indicates that both 5-HMF and OMBF have immunosensitizing potential with different mechanisms, and exposure to 5-HMF and OMBF may represent a safety concern for humans. Copyright © 2016 Elsevier Inc. All rights reserved.

One-Pot Conversion of Carbohydrates into Furan Derivatives via Furfural and 5-Hydroxylmethylfurfural as Intermediates.

Science.gov (United States)

Liu, Bing; Zhang, Zehui

2016-08-23

Recently, there has been growing interest in the transformation of renewable biomass into value-added fuels and chemicals. The catalytic conversion of naturally abundant carbohydrates can generate two-important furan chemicals: 5-hydroxymethylfurfural (HMF) from C6 carbohydrates and furfural from C5 carbohydrates. Both HMF and furfural have received great interest as precursors in the synthesis of commodity chemicals and liquid fuels. In recent years, a trend has emerged to integrate sequential catalytic processes involving multistep reactions for the direct one-pot transformation of carbohydrates into the aimed fuels and chemicals. One-pot reactions have remarkably unique and environmentally friendly benefits, including the fact that isolation and purification of intermediate compounds can be avoided. Herein, the present article aims to review recent advances in the one-pot conversion of carbohydrates into furan derivatives via furfural and HMF as intermediates. Special attention will be paid to the catalytic systems, mechanistic insight, reaction pathways, and catalyst stability. It is expected that this review will guide researchers to develop effective catalytic systems for the one-pot transformation of carbohydrates into furan derivatives. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Inhibition effects of furfural on alcohol dehydrogenase, aldehyde dehydrogenase and pyruvate dehydrogenase.

Science.gov (United States)

Modig, Tobias; Lidén, Gunnar; Taherzadeh, Mohammad J

2002-01-01

The kinetics of furfural inhibition of the enzymes alcohol dehydrogenase (ADH; EC 1.1.1.1), aldehyde dehydrogenase (AlDH; EC 1.2.1.5) and the pyruvate dehydrogenase (PDH) complex were studied in vitro. At a concentration of less than 2 mM furfural was found to decrease the activity of both PDH and AlDH by more than 90%, whereas the ADH activity decreased by less than 20% at the same concentration. Furfural inhibition of ADH and AlDH activities could be described well by a competitive inhibition model, whereas the inhibition of PDH was best described as non-competitive. The estimated K(m) value of AlDH for furfural was found to be about 5 microM, which was lower than that for acetaldehyde (10 microM). For ADH, however, the estimated K(m) value for furfural (1.2 mM) was higher than that for acetaldehyde (0.4 mM). The inhibition of the three enzymes by 5-hydroxymethylfurfural (HMF) was also measured. The inhibition caused by HMF of ADH was very similar to that caused by furfural. However, HMF did not inhibit either AlDH or PDH as severely as furfural. The inhibition effects on the three enzymes could well explain previously reported in vivo effects caused by furfural and HMF on the overall metabolism of Saccharomyces cerevisiae, suggesting a critical role of these enzymes in the observed inhibition. PMID:11964178

Gold nanoclusters confined in a supercage of Y zeolite for aerobic oxidation of HMF under mild conditions.

Science.gov (United States)

Cai, Jiaying; Ma, Hong; Zhang, Junjie; Song, Qi; Du, Zhongtian; Huang, Yizheng; Xu, Jie

2013-10-11

Au nanoclusters with an average size of approximately 1 nm size supported on HY zeolite exhibit a superior catalytic performance for the selective oxidation of 5-hydroxymethyl-2-furfural (HMF) into 2,5-furandicarboxylic acid (FDCA). It achieved >99 % yield of 2,5-furandicarboxylic acid in water under mild conditions (60 °C, 0.3 MPa oxygen), which is much higher than that of Au supported on metal oxides/hydroxide (TiO2 , CeO2 , and Mg(OH)2 ) and channel-type zeolites (ZSM-5 and H-MOR). Detailed characterizations, such as X-ray diffraction, transmission electron microscopy, N2 -physisorption, and H2 -temperature-programmed reduction (TPR), revealed that the Au nanoclusters are well encapsulated in the HY zeolite supercage, which is considered to restrict and avoid further growing of the Au nanoclusters into large particles. The acidic hydroxyl groups of the supercage were proven to be responsible for the formation and stabilization of the gold nanoclusters. Moreover, the interaction between the hydroxyl groups in the supercage and the Au nanoclusters leads to electronic modification of the Au nanoparticles, which is supposed to contribute to the high efficiency in the catalytic oxidation of HMF to FDCA. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

YNL134C from Saccharomyces cerevisiae encodes a novel protein with aldehyde reductase activity for detoxification of furfural derived from lignocellulosic biomass.

Science.gov (United States)

Zhao, Xianxian; Tang, Juan; Wang, Xu; Yang, Ruoheng; Zhang, Xiaoping; Gu, Yunfu; Li, Xi; Ma, Menggen

2015-05-01

Furfural and 5-hydroxymethylfurfural (HMF) are the two main aldehyde compounds derived from pentoses and hexoses, respectively, during lignocellulosic biomass pretreatment. These two compounds inhibit microbial growth and interfere with subsequent alcohol fermentation. Saccharomyces cerevisiae has the in situ ability to detoxify furfural and HMF to the less toxic 2-furanmethanol (FM) and furan-2,5-dimethanol (FDM), respectively. Herein, we report that an uncharacterized gene, YNL134C, was highly up-regulated under furfural or HMF stress and Yap1p and Msn2/4p transcription factors likely controlled its up-regulated expression. Enzyme activity assays showed that YNL134C is an NADH-dependent aldehyde reductase, which plays a role in detoxification of furfural to FM. However, no NADH- or NADPH-dependent enzyme activity was observed for detoxification of HMF to FDM. This enzyme did not catalyse the reverse reaction of FM to furfural or FDM to HMF. Further studies showed that YNL134C is a broad-substrate aldehyde reductase, which can reduce multiple aldehydes to their corresponding alcohols. Although YNL134C is grouped into the quinone oxidoreductase family, no quinone reductase activity was observed using 1,2-naphthoquinone or 9,10-phenanthrenequinone as a substrate, and phylogenetic analysis indicates that it is genetically distant to quinone reductases. Proteins similar to YNL134C in sequence from S. cerevisiae and other microorganisms were phylogenetically analysed. Copyright © 2015 John Wiley & Sons, Ltd.

Electrochemical Probing of in Vivo 5-Hydroxymethyl Furfural Reduction in Saccharomyces cerevisiae

DEFF Research Database (Denmark)

Kostesha, Natalie; Almeida, J.R.M.; Heiskanen, Arto

2009-01-01

with HMF, was probed using the menadione-ferricyanide double mediator system. A lower intracellular NADPH level as the consequence of more effective HMF reduction was observed for the ADH6 strain both with and without added glucose, which increases the overall cellular NADPH level. The mediated...

Studies of the Raman Spectra of Cyclic and Acyclic Molecules: Combination and Prediction Spectrum Methods

Energy Technology Data Exchange (ETDEWEB)

Kim, Taijin; Assary, Rajeev S.; Marshall, Christopher L.; Gosztola, David J.; Curtiss, Larry A.; Stair, Peter C.

2012-04-02

A combination of Raman spectroscopy and density functional methods was employed to investigate the spectral features of selected molecules: furfural, 5-hydroxymethyl furfural (HMF), methanol, acetone, acetic acid, and levulinic acid. The computed spectra and measured spectra are in excellent agreement, consistent with previous studies. Using the combination and prediction spectrum method (CPSM), we were able to predict the important spectral features of two platform chemicals, HMF and levulinic acid.The results have shown that CPSM is a useful alternative method for predicting vibrational spectra of complex molecules in the biomass transformation process.

Rapid determination of acetic acid, furfural and 5-hydroxymethylfurfural in biomass hydrolysate using near-infrared spectroscopy

Science.gov (United States)

Near infrared spectroscopy (NIR) is a rapid detection technique that has been used to characterize biomass. The objective of this study was to develop suitable NIR models to predict the acetic acid, furfural, and 5-hydroxymethylfurfural (HMF) contents in biomass hydrolysates. Using a uniform distrib...

Study of hydroxymethylfurfural and furfural formation in cakes during baking in different ovens, using a validated multiple-stage extraction-based analytical method.

Science.gov (United States)

Petisca, Catarina; Henriques, Ana Rita; Pérez-Palacios, Trinidad; Pinho, Olívia; Ferreira, Isabel M P L V O

2013-12-15

A procedure for extraction of hydroxymethylfurfural (HMF) and furfural from cakes was validated. Higher yield was achieved by multiple step extraction with water/methanol (70/30) and clarification with Carrez I and II reagents. Oven type and baking time strongly influenced HMF, moisture and volatile profile of model cakes, whereas furfural content was not significantly affected. No correlation was found between these parameters. Baking time influenced moisture and HMF formation in cakes from traditional and microwave ovens but not in steam oven cakes. Significant moisture decrease and HMF increase (3.63, 9.32, and 41.9 mg kg(-1)dw at 20, 40 and 60 min, respectively) were observed during traditional baking. Cakes baked by microwave also presented a significant increase of HMF (up to 16.84 mg kg(-1)dw at 2.5 min). Steam oven cakes possessed the highest moisture content and no significant differences in HMF and furfural. This oven is likely to form low HMF and furfural, maintaining cake moisture and aroma compounds. Copyright © 2013 Elsevier Ltd. All rights reserved.

Kinetic mechanism of an aldehyde reductase of Saccharomyces cerevisiae that relieves toxicity of furfural and 5-hydroxymethylfurfural

Science.gov (United States)

An effective means of relieving the toxicity of furan aldehydes, furfural (FFA) and 5-hydroxymethylfurfural (HMF), on fermenting organisms is essential for achieving efficient fermentation of lignocellulosic biomass to ethanol and other products. Ari1p, an aldehyde reductase from Saccharomyces cerev...

Identification, purification and characterization of furfural transforming enzymes from Clostridium beijerinckii NCIMB 8052.

Science.gov (United States)

Zhang, Yan; Ujor, Victor; Wick, Macdonald; Ezeji, Thaddeus Chukwuemeka

2015-06-01

Generation of microbial inhibitory compounds such as furfural and 5-hydroxymethylfurfural (HMF) is a formidable roadblock to fermentation of lignocellulose-derived sugars to butanol. Bioabatement offers a cost effective strategy to circumvent this challenge. Although Clostridium beijerinckii NCIMB 8052 can transform 2-3 g/L of furfural and HMF to their less toxic alcohols, higher concentrations present in biomass hydrolysates are intractable to microbial transformation. To delineate the mechanism by which C. beijerinckii detoxifies furfural and HMF, an aldo/keto reductase (AKR) and a short-chain dehydrogenase/reductase (SDR) found to be over-expressed in furfural-challenged cultures of C. beijerinckii were cloned and over-expressed in Escherichia coli Rosetta-gami™ B(DE3)pLysS, and purified by histidine tag-assisted immobilized metal affinity chromatography. Protein gel analysis showed that the molecular weights of purified AKR and SDR are close to the predicted values of 37 kDa and 27 kDa, respectively. While AKR has apparent Km and Vmax values of 32.4 mM and 254.2 mM s(-1) respectively, using furfural as substrate, SDR showed lower Km (26.4 mM) and Vmax (22.6 mM s(-1)) values on the same substrate. However, AKR showed 7.1-fold higher specific activity on furfural than SDR. Further, both AKR and SDR were found to be active on HMF, benzaldehyde, and butyraldehyde. Both enzymes require NADPH as a cofactor for aldehydes reduction. Based on these results, it is proposed that AKR and SDR are involved in the biotransformation of furfural and HMF by C. beijerinckii. Copyright © 2015 Elsevier Ltd. All rights reserved.

Highly Selective Aerobic Oxidation of 5-Hydroxymethyl Furfural into 2,5-Diformylfuran over Mn-Co Binary Oxides

DEFF Research Database (Denmark)

Gui, Zhenyou; Shunmugavel, Saravanamurugan; Cao, Wenrong

2017-01-01

A series of Mn−Co binary oxides were prepared by a simple thermal decomposition procedure and evaluated for the aerobic oxidation of 5-hydroxymethylfurfural (HMF) into 2,5-diformylfuran (DFF). Investigation of the effects of metal amounts and calcination temperatures of the prepared catalysts rev...

Cellobiose fermenting yeast produces varied forms of native ß-glucosidase

Science.gov (United States)

The rapid growing yeast strain NRRL Y-50464 is robust to environmental stress and resistant to 2-furaldehyde (furfural) and 5-[hydroxymethyl]-2-furaldehyde (HMF). It is able to utilize cellobiose as its sole source of carbon and produces ethanol from lignocellulosic biomass by simultaneous saccharif...

The yeast ADH7 promoter enables gene expression under pronounced translation repression caused by the combined stress of vanillin, furfural, and 5-hydroxymethylfurfural.

Science.gov (United States)

Ishida, Yoko; Nguyen, Trinh Thi My; Izawa, Shingo

2017-06-20

Lignocellulosic biomass conversion inhibitors such as vanillin, furfural, and 5-hydroxymethylfurfural (HMF) inhibit the growth of and fermentation by Saccharomyces cerevisiae. A high concentration of each fermentation inhibitor represses translation and increases non-translated mRNAs. We previously reported that the mRNAs of ADH7 and BDH2, which encode putative NADPH- and NADH-dependent alcohol dehydrogenases, respectively, were efficiently translated even with translation repression in response to severe vanillin stress. However, the combined effects of these fermentation inhibitors on the expression of ADH7 and BDH2 remain unclear. We herein demonstrated that exposure to a combined stress of vanillin, furfural, and HMF repressed translation. The protein synthesis of Adh7, but not Bdh2 was significantly induced under combined stress conditions, even though the mRNA levels of ADH7 and BDH2 were up-regulated. Additionally, adh7Δ cells were more sensitive to the combined stress than wild-type and bdh2Δ cells. These results suggest that induction of the ADH7 expression plays a role in the tolerance to the combined stress of vanillin, furfural, and HMF. Furthermore, we succeeded in improving yeast tolerance to the combined stress by controlling the expression of ALD6 with the ADH7 promoter. Our results demonstrate that the ADH7 promoter can overcome the pronounced translation repression caused by the combined stress of vanillin, furfural, and HMF, and also suggest a new gene engineering strategy to breed robust and optimized yeasts for bioethanol production from a lignocellulosic biomass. Copyright © 2017 Elsevier B.V. All rights reserved.

Cyclopentanone: A raw material for production of C15 and C17 fuel precursors

International Nuclear Information System (INIS)

Hronec, Milan; Fulajtárova, Katarína; Liptaj, Tibor; Štolcová, Magdaléna; Prónayová, Naďa; Soták, Tomáš

2014-01-01

The synthesis of diesel or jet fuels intermediates from furfural or 5-hydroxymethylfurfural (HMF) via aqueous aldol-condensation with cyclopentanone was studied. Cyclopentanone is the product of furfural rearrangement in an aqueous system. Since the aldol-condensation reaction is conducted in an aqueous solution all these biomass-derived reactants can be applied as water solutions formed in the processes of their preparation. The aldol condensation of furfural with cyclopentanone is at low concentration of base and molar ratio of reactants 2:1 highly selective and after 40–80 min of reaction at a temperature of 40–100 °C more than 95 mol% yield of 2,5-bis (2-furylmethylidene) cyclopentan-1-one (F 2 C) was obtained. When instead of furfural as a reactant HMF was used higher than 98 mol% yield of 2,5-bis (5-hydroxymethyl-2-furylmethylidene) cyclopentan-1-one was achieved. The final products of aldol condensation of furfural and HMF are exclusively corresponding dimers, what enables to obtain after subsequent hydrogenation/hydrodeoxygenation step dialkylcyclopentane type of diesel or jet fuels having C 15 or C 17 molecules. - Highlights: • The aldol condensation of biomass derived cyclopentanone with furfural and HMF. • More than 95 mol % yields of products are achieved. • The products are compounds having exclusively 15 or 17 carbon atoms in molecule. • Reactants can be used as diluted aqueous solutions. • The products are separated as solids insoluble in water

Formation and reactivity of free radicals in 5-hydroxymethyl-2-furaldehyde--the effect on isoprenaline photostability.

Science.gov (United States)

Brustugun, Jørgen; Tønnesen, Hanne H; Edge, Ruth; Navaratnam, Suppiah

2005-05-13

Solutions of glucose are used as diluents for drugs in various drug infusions. When sterilized by heat small amounts of the substance 5-hydroxymethyl-2-furaldehyde (5-HMF) is produced from glucose. At a hospital ward such infusions may be exposed to irradiation; including UV-light. The photoreactivity of the furaldehyde is investigated. It is shown to photodestabilize the catecholamine isoprenaline. It is shown to be a producer, but also a consumer, of singlet oxygen. The excited triplet, cation and anion radical have been produced by pulse radiolysis and flash photolysis and their absorbance characteristics have been determined. The triplet absorption spectrum showed absorption bands at 320 and 430 nm with molar absorption coefficients of 4700 and 2600 M-1 cm-1, respectively. The anion radical showed absorption bands at 330 and 420 nm with molar absorption coefficients of 2000 and 300 M-1 cm-1, respectively. The cation radical had an absorption band at 320 nm with a molar absorption coefficient of 5000 M-1 cm-1. The quantum yield for the production of singlet oxygen, sensitized by the 5-HMF triplet, was determined to be 0.6, whilst the quantum yield for the triplet formation was 1.0. Aqueous solutions of 5-HMF were found to photoionize to yield the hydrated electron and the cation radical of 5-HMF in a biphotonic process. The influences of pH, buffer and glucose on the formation of transients were evaluated. The reactions between 5-HMF and the solvated electron, the hydroxyl radical and the superoxide were also studied.

Determination of very low levels of 5-(hydroxymethyl)-2-furaldehyde (HMF) in natural honey: comparison between the HPLC technique and the spectrophotometric white method.

Science.gov (United States)

Truzzi, Cristina; Annibaldi, Anna; Illuminati, Silvia; Finale, Carolina; Rossetti, Monica; Scarponi, Giuseppe

2012-07-01

In this work we compared 2 official methods for the determination of HMF in honey, the spectrophotometric White method and the HPLC method (International Honey Commission) for the determination of HMF in unifloral honey and honeydew samples with a very low HMF content (5 mg/kg, the molar extinction coefficient is 15369, lower than the literature value of 16830, and should be used for HMF determination. For samples with HMF content in the range 1-4 mg/kg the accuracy of the 2 methods is comparable both for unifloral and honeydew samples, whereas as regards precision, the HPLC method gives better results (3.5% compared with 6.4% for the White method). So, in general, the HPLC method seems to be more appropriate for the determination of HMF in honey in the range 1-4 mg/kg thanks to its greater precision, but for samples with a HMF content of less than 1 mg/kg the analyses are inaccurate for both methods. This work can help governmental and private laboratories that perform food analyses to choose the best method for the determination of HMF at very low levels in unifloral honey and honeydew samples. © 2012 Institute of Food Technologists®

A kinetic study on microwave-assisted conversion of cellulose and lignocellulosic waste into hydroxymethylfurfural/furfural.

Science.gov (United States)

da Silva Lacerda, Viviane; López-Sotelo, Juan Benito; Correa-Guimarães, Adriana; Hernández-Navarro, Salvador; Sánchez-Bascones, Mercedes; Navas-Gracia, Luis M; Martín-Ramos, Pablo; Pérez-Lebeña, Eduardo; Martín-Gil, Jesús

2015-03-01

Native cellulose, lignocellulosic materials from Brazil (carnauba palm leaves and macauba pulp and shell) and pine nut shell from Spain have been studied as substrates for the production of HMF and furfural in a conventional microwave oven. In order to promote the dissolution of native cellulose, several ionic liquids, catalysts, organic solvents and water doses have been assessed. The most suitable mixture (5mL of choline chloride/oxalic acid, 2mL of sulfolane, 2mL of water, 0.02g of TiO2 and 0.1g of substrate) has been chosen to conduct kinetic studies at different reaction times (5-60min) and various temperatures (120-200°C) and to evaluate the best conditions for HMF+furfural production according to Seaman's model. The best production yields of HMF+furfural have been attained for native cellulose, with a yield of 53.24% when an ultrasonic pretreatment was used prior to a microwave treatment with stirring. Copyright © 2014 Elsevier Ltd. All rights reserved.

Isolation and characterization of Cupriavidus basilensis HMF14 for biological removal of inhibitors from lignocellulosic hydrolysatembt

NARCIS (Netherlands)

Wierckx, N.; Koopman, F.; Bandounas, L.; Winde, J.H.de; Ruijssenaars, H.J.

2010-01-01

The formation of toxic fermentation inhibitors such as furfural and 5-hydroxy-2-methylfurfural (HMF) during acid (pre-)treatment of lignocellulose, calls for the efficient removal of these compounds. Lignocellulosic hydrolysates can be efficiently detoxified biologically with microorganisms that

Reevaluation of the phenol-sulfuric acid reaction for the estimation of hexoses and pentoses.

Science.gov (United States)

Rao, P; Pattabiraman, T N

1989-08-15

Evidence is provided to show that in the conventional phenol-sulfuric acid reaction procedure, phenol underwent sulfonation in situ and the phenolsulfonic acid formed decreased the color intensity for hydroxymethyl furfural (HMF), furfural, and many hexoses and pentoses tested. A modified method is described to overcome this problem in which phenol was added after the dehydration of carbohydrates by sulfuric acid and after cooling the system. The color intensity around 475-485 nm for different compounds was fairly proportional to the amount of furfural derivatives (absorption at 310-320 nm) formed from the sugars in the modified method unlike in the conventional procedure. The studies also show that for condensation of HMF derivatives with phenol, heat is not necessary. The color intensity in the modified method also increased compared to that in the conventional method. The increase in the modified method compared to that in the conventional method was 6.0-fold for furfural, 9.1-fold for hydroxymethyl furfural, 3.7-fold for fructose, 2.3-fold for xylose, and 2.0-fold for glucose and arabinose. The possible reasons for this differential increase are discussed.

The Margin of Exposure of 5-Hydroxymethylfurfural (HMF) in Alcoholic Beverages.

Science.gov (United States)

Monakhova, Yulia B; Lachenmeier, Dirk W

2012-01-01

5-Hydroxymethylfurfural (HMF) regularly occurs in foods and in alcoholic beverages. However, the risk of HMF associated with alcohol consumption has not been systematically studied, so that this study will provide the first quantitative risk assessment of HMF for consumers of alcoholic beverages. Human dietary intake of HMF via alcoholic beverages in the European Union was estimated based on WHO alcohol consumption data combined with our own survey data (n=944) and literature data (n=147) about the HMF contents of different beverage groups (beer, wine, spirits and unrecorded alcohol). The risk assessment was conducted using the margin of exposure (MOE) approach. For olfactory epithelium metaplasia in female mice, a benchmark dose (BMD) of 127 mg/kg bodyweight (bw)/d and a BMD lower confidence limit (BMDL) of 79 mg/kg bw/d were calculated from National Toxicology Program oral long-term animal experiments. The average human exposure to HMF from alcoholic beverages was estimated at 6.0E-3 mg/kg bw/d, which is approximately 8.5% of the total dietary exposure. In comparison of the human exposure with BMDL, the MOE was 13,167 for average alcohol consumption scenarios, which is a value that would be generally assumed as safe for threshold based compounds. The results show that the risk from HMF to the alcohol-consuming population is rather low and the priority for risk management (e.g. to reduce the contamination) is also low. Further toxicological research about HMF is required to further elucidate its mechanism.

One-pot conversion of biomass-derived xylose and furfural into levulinate esters via acid catalysis.

Science.gov (United States)

Hu, Xun; Jiang, Shengjuan; Wu, Liping; Wang, Shuai; Li, Chun-Zhu

2017-03-07

Direct conversion of biomass-derived xylose and furfural into levulinic acid, a platform molecule, via acid-catalysis has been accomplished for the first time in dimethoxymethane/methanol. Dimethoxymethane acted as an electrophile to transform furfural into 5-hydroxymethylfurfural (HMF). Methanol suppressed both the polymerisation of the sugars/furans and the Aldol condensation of levulinic acid/ester.

Analysis of patulin in dutch food, an evaluation of a SPE based method

NARCIS (Netherlands)

Boonzaaijer, G.; Bobeldijk, I.; Osenbruggen, W.A. van

2005-01-01

A reliable method for the determination of patulin in apple juice, apple puree and apples was developed using two clean-up steps and high performance liquid chromatography and diode array (HPLC-DAD) analysis. Baseline separation from hydroxymethyl furfural (HMF) was obtained. The performance

Effect of heat treatment and dough formulation on the formation of Maillard reaction products in fine bakery products - benefits and weak points

OpenAIRE

Ciesarová, Z.; Kukurová, K.; Bednáriková, A.; Morales, F. J.

2009-01-01

Possibly harmful compounds (acrylamide, 5-(hydroxymethyl)-2-furfural - HMF), markers of the Maillard reaction extent (furosine, fluorescence, browning, colour), as well as beneficial radical-scavenging capacity were determined in fried fine bakery products, rosquillas, at different heat treatment and dough formulation. In different simplified recipes, saccharose was substituted by glucose and fructose, and a raising agent was added while different temperature and time regimes were applied. Du...

Simple gas chromatographic method for furfural analysis.

Science.gov (United States)

Gaspar, Elvira M S M; Lopes, João F

2009-04-03

A new, simple, gas chromatographic method was developed for the direct analysis of 5-hydroxymethylfurfural (5-HMF), 2-furfural (2-F) and 5-methylfurfural (5-MF) in liquid and water soluble foods, using direct immersion SPME coupled to GC-FID and/or GC-TOF-MS. The fiber (DVB/CAR/PDMS) conditions were optimized: pH effect, temperature, adsorption and desorption times. The method is simple and accurate (RSDfurfurals will contribute to characterise and quantify their presence in the human diet.

Synthesis of furfural from xylose, xylan, and biomass using AlCl3·6H2O in biphasic media via xylose isomerization to xylulose.

Science.gov (United States)

Yang, Yu; Hu, Chang-Wei; Abu-Omar, Mahdi M

2012-02-13

Furfural was prepared in high yields (75 %) from the reaction of xylose in a water-tetrahydrofuran biphasic medium containing AlCl(3)·6H2O and NaCl under microwave heating at 140 °C. The reaction profile revealed the formation of xylulose as an intermediate en route to the dehydration product (furfural). The reaction under these conditions reached completion in 45 min. The aqueous phase containing AlCl(3)·6H(2)O and NaCl could be recycled multiple times (>5) without any loss of activity or selectivity for furfural. Extension of this biphasic reaction system to include xylan as the starting material afforded furfural in 64 % yield. The use of corn stover, pinewood, switchgrass, and poplar gave furfural in 55, 38, 56, and 64 % yield, respectively, at 160 °C. Even though AlCl(3)·6H(2)O did not affect the conversion of crystalline cellulose, moderate yields of the by-product 5-hydroxymethylfurfural (HMF) were noted. The highest HMF yield of 42 % was obtained from pinewood. The coproduction of HMF and furfural from biomass was attributed to the weakening of the cellulose network in the biomass, as a result of hemicellulose hydrolysis. The multifunctional capacity of AlCl(3)·6H(2)O (hemicellulose hydrolysis, xylose isomerization, and xylulose dehydration) in combination with its ease of recyclability make it an attractive candidate/catalyst for the selective synthesis of furfural from various biomass feedstocks. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Furfural and hydroxymethylfurfural tolerance in Escherichia coli ΔacrR regulatory mutants.

Science.gov (United States)

Luhe, Annette Lin; Lim, Chan Yuen; Gerken, Henri; Wu, Jinchuan; Zhao, Hua

2015-01-01

The presence of the highly toxic furfural and hydroxymethylfurfural (HMF) in the hydrolysate of lignocellulosic biomass prompted the investigation of the Escherichia coli ΔacrR regulatory mutant for higher tolerance to these compounds, to facilitate the production of biofuels and biochemicals, and further biocatalytic conversions. In comparison with the parental strain, the regulatory mutant with the upregulated efflux pump AcrAB-TolC produced moderately better growth and higher tolerance to concentrations of furfural and HMF between 1 and 2 g L(-1) . © 2014 International Union of Biochemistry and Molecular Biology, Inc.

Detection of 5-hydroxymethylfurfural and furfural in the aerosol of electronic cigarettes.

Science.gov (United States)

Soussy, Sarah; El-Hellani, Ahmad; Baalbaki, Rima; Salman, Rola; Shihadeh, Alan; Saliba, Najat A

2016-11-01

The wide availability of sweet flavours has been hypothesised as a factor in the popularity of electronic cigarette (ECIG), especially among youth. Saccharides, which are commonly used to impart a sweet flavour to ECIG liquids, thermally degrade to produce toxic compounds, like aldehydes and furans. This study investigates the formation of furanic compounds in aerosols when ECIG liquid solutions of varying sweetener concentrations are vaped under different power and puff duration. Liquids are prepared by mixing aqueous sucrose, glucose or sorbitol solutions to a 70/30 propylene glycol/glycerin solution. Aerosols are generated and trapped on filter pads using a commercially available ECIG operating at 4.3 and 10.8 W and 4 and 8 s puff duration. Extraction, elimination of matrix interference and quantification are achieved using novel solid phase extraction and gas chromatography tandem mass spectrometry methods (GC-MS). Well-resolved GC peaks of 5-hydroxymethylfurfural (HMF) and furfural (FA) are detected. Both HMF and FA are quantified in the aerosols of sweet-flavoured e-liquids under various vaping conditions. Levels of furan emissions are significantly correlated with electric power and sweetener concentration and not with puff duration. Unlike saccharides, the formation of HMF and FA from a sugar alcohol is negligible. The addition of sweeteners to ECIG liquids exposes ECIG user to furans, a toxic class of compounds. Under certain conditions, the per-puff yield of HMF and FA in ECIG emissions is comparable to values reported for combustible cigarettes. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

The effects of furfural on ethanol production by Saccharomyces cerevisiae in batch culture

Energy Technology Data Exchange (ETDEWEB)

Boyer, L.J.; Vega, J.L.; Klasson, K.T.; Clausen, E.C.; Gaddy, J.L. (Arkansas Univ., Fayetteville, AR (US). Dept. of Chemical Engineering)

1992-01-01

Browning reaction products such as furfural and 5-hydroxy-methyl-furfural (HMF) have been shown to inhibit microbial growth and metabolism in ethanol fermentations using Saccharomyces cerevisiae. This paper quantifies the extent of furfural inhibition and yeast growth, glucose utilization, and ethanol production as a function of inoculum size (0.1-9 gl{sup -1}). Batch culture experiments were conducted using furfural concentrations in the range of 0 to 2.0 gl{sup -1} and mathematical correlations were proposed and tested. The results indicate that the specific growth rate decreased with increasing furfural concentration and inoculum size, while the maintenance coefficients were unaffected. The apparent and true cell yield coefficients on glucose were depressed with the addition of furfural. Specific production rates were unaffected at the furfural levels used but ethanol inhibition was apparent. The specific production rate was less inhibited by ethanol at higher inoculum sizes. Global specific productivities were not affected by the presence of furfural. At a 0.1 gl{sup -1} inoculum size, furfural depletion was complete within 15-20 h, depending upon the furfural concentration employed. At higher incoculum levels (2-9 gl{sup -1}), all furfural was depleted in less than 5 h. (author).

Effects of Sodium Chloride, Potassium Chloride and Calcium Chloride on the Formation of α-Dicarbonyl Compounds, Furfurals and Development of Browning in Cookies during Baking.

Science.gov (United States)

Kocadağlı, Tolgahan; Gökmen, Vural

2016-10-02

Effect of NaCl, KCl, CaCl2, NaHCO3, and NH4HCO3 on the formation of glucosone, 1-deoxyglucosone, 3-deoxyglucosone, glyoxal, methylglyoxal, diacetyl, 5-hydroxymethyl-2-furfural, 2-furfural and browning were investigated in cookies. Presence of 1.5% NaCl, 1% KCl, and 1% CaCl2 on flour basis had no effect on α-dicarbonyl compounds, except 1-deoxyglucosone increased in the presence of KCl and CaCl2. The increase in 5-hydroxymethyl-2-furfural formation in the presence of NaCl, KCl, and CaCl2 did not relate to 3-deoxyglucosone formation and pH changes. NaCl, KCl, and CaCl2 increased browning in cookies. Model reaction systems indicated that NaCl, KCl, and CaCl2 enhance browning by increasing furfurals in caramelization. NaCl, KCl, and CaCl2 decreased browning intensity in heated glucose-glycine system. Usage of CaCl2 in cookies may considerably increase furfurals but not α-dicarbonyl compounds. Sodium reduction can be obtained by replacement with potassium without sacrificing the desired consequences of caramelization in sugar rich bakeries.

Near-infrared Spectroscopy as a Process Analytical Technology Tool for Monitoring the Parching Process of Traditional Chinese Medicine Based on Two Kinds of Chemical Indicators.

Science.gov (United States)

Li, Kaiyue; Wang, Weiying; Liu, Yanping; Jiang, Su; Huang, Guo; Ye, Liming

2017-01-01

The active ingredients and thus pharmacological efficacy of traditional Chinese medicine (TCM) at different degrees of parching process vary greatly. Near-infrared spectroscopy (NIR) was used to develop a new method for rapid online analysis of TCM parching process, using two kinds of chemical indicators (5-(hydroxymethyl) furfural [5-HMF] content and 420 nm absorbance) as reference values which were obviously observed and changed in most TCM parching process. Three representative TCMs, Areca ( Areca catechu L.), Malt ( Hordeum Vulgare L.), and Hawthorn ( Crataegus pinnatifida Bge.), were used in this study. With partial least squares regression, calibration models of NIR were generated based on two kinds of reference values, i.e. 5-HMF contents measured by high-performance liquid chromatography (HPLC) and 420 nm absorbance measured by ultraviolet-visible spectroscopy (UV/Vis), respectively. In the optimized models for 5-HMF, the root mean square errors of prediction (RMSEP) for Areca, Malt, and Hawthorn was 0.0192, 0.0301, and 0.2600 and correlation coefficients ( R cal ) were 99.86%, 99.88%, and 99.88%, respectively. Moreover, in the optimized models using 420 nm absorbance as reference values, the RMSEP for Areca, Malt, and Hawthorn was 0.0229, 0.0096, and 0.0409 and R cal were 99.69%, 99.81%, and 99.62%, respectively. NIR models with 5-HMF content and 420 nm absorbance as reference values can rapidly and effectively identify three kinds of TCM in different parching processes. This method has great promise to replace current subjective color judgment and time-consuming HPLC or UV/Vis methods and is suitable for rapid online analysis and quality control in TCM industrial manufacturing process. Near-infrared spectroscopy.(NIR) was used to develop a new method for online analysis of traditional Chinese medicine.(TCM) parching processCalibration and validation models of Areca, Malt, and Hawthorn were generated by partial least squares regression using 5

Detoxification of acidic biorefinery waste liquor for production of high value amino acid.

Science.gov (United States)

Christopher, Meera; Anusree, Murali; Mathew, Anil K; Nampoothiri, K Madhavan; Sukumaran, Rajeev Kumar; Pandey, Ashok

2016-08-01

The current study evaluates the detoxification of acid pretreatment liquor (APL) using adsorbent (ADS 400 & ADS 800) or ion-exchange (A-27MP & A-72MP) resins and its potential for amino acid production. The APL is generated as a by-product from the pretreatment of lignocellulosic biomass and is rich monomeric sugars as well as sugar degradation products (fermentation inhibitors) such as furfural and hydroxymethyl furfural (HMF). Of the four resins compared, ADS 800 removed approximately 85% and 60% of furfural and HMF, respectively. ADS 800 could be reused for up to six cycles after regeneration without losing its adsorption properties. The study was further extended by assessing the fermentability of detoxified APL for l-lysine production using wild and mutant strains of Corynebacterium glutamicum. The detoxified APL was superior to APL for l-lysine production. Copyright © 2016 Elsevier Ltd. All rights reserved.

Conversion of corn stalk into furfural using a novel heterogeneous strong acid catalyst in γ-valerolactone.

Science.gov (United States)

Xu, Zhiping; Li, Wenzhi; Du, Zhijie; Wu, Hao; Jameel, Hasan; Chang, Hou-Min; Ma, Longlong

2015-12-01

A novel solid acid catalyst was prepared by the copolymerization of p-toluenesulfonic acid and paraformaldehyde and then characterized by FT-IR, TG/DTG, HRTEM and N2-BET. Furfural was successfully produced by the dehydration of xylose and xylan using the novel catalyst in γ-valerolactone. This investigation focused on effects of various reaction conditions including solvent, acid catalyst, reaction temperature, residence time, water concentration, xylose loading and catalyst dosage on the dehydration of xylose to furfural. It was found that the solid catalyst displayed extremely high activity for furfural production. 80.4% furfural yield with 98.8% xylose conversion was achieved at 170°C for 10 min. The catalyst could be recycled at least five times without significant loss of activity. Furthermore, 83.5% furfural yield and 19.5% HMF yield were obtained from raw corn stalk under more severe conditions (190°C for 100 min). Copyright © 2015 Elsevier Ltd. All rights reserved.

A green ionic liquid-based vortex-forced MSPD method for the simultaneous determination of 5-HMF and iridoid glycosides from Fructus Corni by ultra-high performance liquid chromatography.

Science.gov (United States)

Du, Kunze; Li, Jin; Bai, Yun; An, Mingrui; Gao, Xiu-Mei; Chang, Yan-Xu

2018-04-01

A simple and green ionic liquid-based vortex-forced matrix solid phase dispersion (IL-VFMSPD) method was presented to simultaneously extract 5-hydroxymethyl furfurol (5-HMF) and iridoid glycosides in Fructus Corni by ultra-high performance liquid chromatography. Ionic liquid was used as a green elution reagent in vortex-forced MSPD process. A few parameters such as the type of ionic liquid, the type of sorbent, ratio of sample to sorbent, the concentration and volume of ionic liquid, grinding time and vortex time, were investigated in detail and an orthogonal design experiment was introduced to confirm the best conditions in this procedure. With the final optimized method, the recoveries of the target compounds in Fructus Corni were in the range of 95.2-103% (RSD<5.0%) and the method displayed a good linearity within the range of 0.8-200 μg mL -1 for morroniside, sweroside, loganin, cornuside and 1.2-300 μg mL -1 for 5-HMF. The limits of detection ranged from 0.02 to 0.08 μg mL -1 for all compounds. The results showed that the newly established method was efficiently applied to extract and determine iridoid glycosides and 5-HMF for quality control of Fructus Corni. Copyright © 2017 Elsevier Ltd. All rights reserved.

Cupriavidus necator JMP134 rapidly reduces furfural with a Zn-dependent alcohol dehydrogenase.

Science.gov (United States)

Li, Qunrui; Metthew Lam, L K; Xun, Luying

2011-11-01

Ethanol is a renewable biofuel, and it can be produced from lignocellulosic biomass. The biomass is usually converted to hydrolysates that consist of sugar and sugar derivatives, such as furfural. Yeast ferments sugar to ethanol, but furfural higher than 3 mM is inhibitory. It can take several days for yeast cells to reduce furfural to non-inhibitory furfuryl alcohol before producing ethanol. Bioreduction of furfural to furfuryl alcohol before fermentation may relieve yeast from furfural toxicity. We observed that Cupriavidus necator JMP134, a strict aerobe, rapidly reduced 17 mM furfural to less than 3 mM within 14 min with cell turbidity of 1.0 at 600 nm at 50°C. The rapid reduction consumed ethanol. The "furfural reductase" (FurX) was purified, and it oxidized ethanol to acetaldehyde and reduced furfural to furfuryl alcohol with NAD(+) as the cofactor. The protein was identified with mass spectrometry fingerprinting to be a hypothetical protein belonging to Zn-dependent alcohol dehydrogenase family. The furX-inactivation mutant of C. necator JMP134 lost the ability to rapidly reduce furfural, and Escherichia coli producing recombinant FurX gained the ability. Thus, an alcohol dehydrogenase enabled bacteria to rapidly reduce furfural with ethanol as the reducing power.

Determination of furan precursors and some thermal damage markers in baby foods: ascorbic acid, dehydroascorbic acid, hydroxymethylfurfural and furfural.

Science.gov (United States)

Mesías-García, Marta; Guerra-Hernández, Eduardo; García-Villanova, Belén

2010-05-26

The presence of ascorbic acid (AA), vitamin C (AA + dehydroascorbic acid (DHAA)) and furfural as potential precursors of furan in commercial fruit and vegetable jarred baby food was studied. Hydroxymethylfurfural (HMF) was also determined and used, together with furfural levels, as markers of thermal damage. AA, calculated DHAA and vitamin C values ranged between 22.4 and 103, 2.9 and 13.8, and 32.1 and 113.2 mg/100 g, respectively, in fruit-based baby food. However, no trace of AA was found in the vegetable-based baby food samples tested, probably because these samples are not enriched in vitamin C and the content of this vitamin in fresh vegetables is destroyed during processing. Furfural values ranged from not detected to 236 microg/100 g, being higher in vegetable samples than in fruit samples possibly because of greater AA degradation favored by a higher pH in the vegetable samples. HMF values (range: not detected-959 microg/100 g), however, were higher in the fruit samples, probably due to greater carbohydrate content degradation and as a consequence of the Maillard reaction, favored by a lower pH in these samples. According to these results, HMF would be the optimum indicator of thermal treatment for fruits, and furfural for vegetables. The higher furfural content of vegetable baby food could be considered an index of greater AA degradation and, therefore, the furan content might be higher in this kind of sample than in fruit-based baby food.

Study on autoradiolysis of 5-hydroxymethyl[hydroxy-methyl-3H]uracil

International Nuclear Information System (INIS)

Mittag, E.; Noll, S.; Grosse, B.

1990-01-01

The autoradiolysis of 5-hydroxymethyl-[hydroxymethyl 3 H]uracil with a specific radioactivity of about 2200 GBq per mmol has been studied. The investigations were carried out in aqueous solutions with radiochemical concentrations between 70 and 1200 MBq/ml using UV-spectroscopy. Tritiated 5-hydroxymethyl-5,6-dihydrouracil in a first order respectively pseudo-first order reaction, was obtained. The determined rate constants were correlated with the radiochemical concentration. (author)

Dietary exposure to 5-hydroxymethylfurfural from Norwegian food and correlations with urine metabolites of short-term exposure.

Science.gov (United States)

Husøy, T; Haugen, M; Murkovic, M; Jöbstl, D; Stølen, L H; Bjellaas, T; Rønningborg, C; Glatt, H; Alexander, J

2008-12-01

5-Hydroxymethylfurfural (HMF) is formed in carbohydrate-rich food during acid-catalysed dehydration and in the Maillard reaction from reducing sugars. HMF is found in mg quantities per kg in various foods. HMF is mainly metabolised to 5-hydroxymethyl-2-furoic acid (HMFA), but unknown quantities of the mutagenic 5-sulphoxymethylfurfural (SMF) may also be formed, making HMF potentially hazardous to humans. We determined the HMF content in Norwegian food items and estimated the dietary intake of HMF in 53 volunteers by means of 24h dietary recall. The estimated intakes of HMF were correlated with urinary excretion of HMFA. Coffee, prunes, dark beer, canned peaches and raisins had the highest levels of HMF. The 95th percentile of the estimated daily dietary intake of HMF and the 24h urinary excretion of HMFA were 27.6 and 28.6mg, respectively. Coffee, dried fruit, honey and alcohol were identified as independent determinants of urinary HMFA excretion. Most participants had lower estimated HMF intake than the amount of HMFA excreted in urine. In spite of this there was a significant correlation (r=0.57, P<0.001) between the estimated HMF intake and urinary HMFA. Further studies are needed to reveal alternative sources for HMF exposure.

Glycerol supplementation of the growth medium enhances in situ detoxification of furfural by Clostridium beijerinckii during butanol fermentation.

Science.gov (United States)

Ujor, Victor; Agu, Chidozie Victor; Gopalan, Venkat; Ezeji, Thaddeus Chukwuemeka

2014-01-01

Lignocellulose-derived microbial inhibitors such as furfural and 5-hydroxymethyl furfural adversely affect fermentation of lignocellulosic biomass hydrolysates to fuels and chemicals due to their toxicity on fermenting microbes. To harness the potential of lignocellulose as a cheap source of fermentable sugars, in situ detoxification of furfural and other lignocellulose-derived microbial inhibitors is essential. To enhance in situ detoxification and tolerance of furfural by Clostridium beijerinckii NCIMB 8052 during acetone-butanol-ethanol (ABE) fermentation, the effect of glycerol on NADH/NADPH generation and ABE production by furfural (4, 5, and 6 g/L)-challenged cultures was investigated in this study. In all instances, beneficial outcomes were observed. For example, the fermentation medium supplemented with glycerol and subjected to 5 g/L furfural elicited up to 1.8- and 3-fold increases, respectively, in NADH and NADPH levels in C. beijerinckii 8052 relative to the control culture. These critical changes are the likely underpinnings for the glycerol-mediated 2.3-fold increase in the rate of detoxification of 5 g/L furfural, substrate consumption, and ABE production compared to the unsupplemented medium. Collectively, these results demonstrate that increased intracellular NADH/NADPH in C. beijerinckii 8052 due to glycerol utilization engenders favorable effects on many aspects of cellular metabolism, including enhanced furfural reduction and increased ABE production.

In-Plant Reuse of Pollution Abated Waters.

Science.gov (United States)

1984-08-01

diameter distributions obtained by dif- For example, the adsorption of hydroxymethyl ferentiating cumulative surface area-pore diameter furfural (HMF) in...Activated Carbons G. Basic Concepts of Adsorption on Activated Carbon G-1 Basic Concepts of Adsorption on Activated Carbon Calgon Corporation G-2...been r-un on granular activated carbon to select the proper Cj.rbe--fer -;-the carbon columns and to determine the carbon loading (See Adsorption

Efficient transformation of corn stover to furfural using p-hydroxybenzenesulfonic acid-formaldehyde resin solid acid.

Science.gov (United States)

Zhang, Tingwei; Li, Wenzhi; An, Shengxin; Huang, Feng; Li, Xinzhe; Liu, Jingrong; Pei, Gang; Liu, Qiying

2018-05-24

In this work, p-hydroxybenzenesulfonic acid-formaldehyde resin acid catalyst (MSPFR), was synthesized by a hydrothermal method, and employed for the furfural production from raw corn stover. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), N 2 adsorption-desorption, elemental analysis (EA), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FT-IR) were used to characterize the MSPFR. The effects of reaction time, temperature, solvents and corn stover loading were investigated. The MSPFR presented high catalytic activity for the formation of furfural from corn stover. When the MSPFR/corn stover mass loading ratio was 0.5, a higher furfural yield of 43.4% could be achieved at 190 °C in 100 min with 30.7% 5-hydroxymethylfurfural (HMF) yield. Additionally, quite importantly, the recyclability of the MSPFR for xylose dehydration is good, and for the conversion of corn stover was reasonable. Copyright © 2018 Elsevier Ltd. All rights reserved.

INHIBITION OF THE GROWTH OF TOLERANT YEAST Saccharomyces cerevisiae STRAIN I136 BY A MIXTURE OF SYNTHETIC INHIBITORS

Directory of Open Access Journals (Sweden)

Eny Ida Riyanti

2017-09-01

Full Text Available Biomass from lignocellulosic wastes is a potential source for biobased products.  However, one of the constraints in utilization of biomass hydrolysate is the presence of inhibitors. Therefore, the use of inhibitor-tolerant microorganisms in the fermentation is required. The study aimed to investigate the effect of a mixture of inhibitors on the growth of Saccharomyces cerevisiae strain I136 grown in medium containing synthetic inhibitors (acetic acid, formic acid, furfural, 5-hydroxymethyl furfural/5-HMF, and levulinic acid in four different concentrations with a mixture of carbon sources, glucose  (50 g.l-1 and xylose (50 g.l-1 at 30oC. The parameters related to growth and fermentation products were observed. Results showed that the strain was able to grow in media containing natural inhibitors (BSL medium with µmax of 0.020/h. Higher level of synthetic inhibitors prolonged the lag phase, decreased the cell biomass and ethanol production, and specific growth rate. The strain could detoxify furfural and 5-HMF and produced the highest ethanol (Y(p/s of 0.32 g.g-1 when grown in BSL. Glucose was utilized as its level decreased in a result of increase in cell biomass, in contrast to xylose which was not consumed. The highest cell biomass was produced in YNB with Y (x/s value of 0.25 g.g-1. The strain produced acetic acid as a dominant side product and could convert furfural into a less toxic compound, hydroxyl furfural. This robust tolerant strain provides basic information on resistance mechanism and would be useful for bio-based cell factory using lignocellulosic materials. 

Three new Anthraquinones, one new Benzochromene and one new Furfural glycoside from Lasianthus acuminatissimus.

Science.gov (United States)

Huang, Teng; Ming, Jianxin; Zhong, Jialiang; Zhong, Youquan; Wu, Huaqiang; Liu, Hongdong; Li, Bin

2018-06-01

Three new anthraquinones, lasianthurin B (1), C (2), lasianthuoside D (3), a new benzochromene, lasianthurin D (4), and a new furfural glycoside, lasianthuoside E (5), together with one known compound 4- hydroxymethyl-2-furaldehyde (6) were isolated from an alcohol extract of the root of Lasianthus acuminatissimus. Their structures were elucidated on the basis of extensive spectroscopic data analysis (including 1D, 2D NMR, X-ray, and MS experiments) and comparsion to literature data.

Maleic acid and aluminum chloride catalyzed conversion of glucose to 5-(hydroxymethyl) furfural and levulinic acid in aqueous media

Energy Technology Data Exchange (ETDEWEB)

Zhang, Ximing [Laboratory of Renewable Resources Engineering and Department of Agricultural and Biological Engineering; Purdue University; West Lafayette; USA; The Center for Direct Catalytic Conversion of Biomass to Biofuels (C3Bio); Murria, Priya [The Center for Direct Catalytic Conversion of Biomass to Biofuels (C3Bio); Discovery Park; Purdue University; West Lafayette; USA; Jiang, Yuan [The Center for Direct Catalytic Conversion of Biomass to Biofuels (C3Bio); Discovery Park; Purdue University; West Lafayette; USA; Xiao, Weihua [Laboratory of Renewable Resources Engineering and Department of Agricultural and Biological Engineering; Purdue University; West Lafayette; USA; College of Engineering; Kenttämaa, Hilkka I. [The Center for Direct Catalytic Conversion of Biomass to Biofuels (C3Bio); Discovery Park; Purdue University; West Lafayette; USA; Abu-Omar, Mahdi M. [The Center for Direct Catalytic Conversion of Biomass to Biofuels (C3Bio); Discovery Park; Purdue University; West Lafayette; USA; Mosier, Nathan S. [Laboratory of Renewable Resources Engineering and Department of Agricultural and Biological Engineering; Purdue University; West Lafayette; USA; The Center for Direct Catalytic Conversion of Biomass to Biofuels (C3Bio)

2016-01-01

Maleic acid (MA) and AlCl₃self-assemble into catalytic complexes (Al–(MA)₂–(OH)₂(aq)) with improved selectivity for converting glucose to HMF, and levulinic acid.

Two-step sequential pretreatment for the enhanced enzymatic hydrolysis of coffee spent waste.

Science.gov (United States)

Ravindran, Rajeev; Jaiswal, Swarna; Abu-Ghannam, Nissreen; Jaiswal, Amit K

2017-09-01

In the present study, eight different pretreatments of varying nature (physical, chemical and physico-chemical) followed by a sequential, combinatorial pretreatment strategy was applied to spent coffee waste to attain maximum sugar yield. Pretreated samples were analysed for total reducing sugar, individual sugars and generation of inhibitory compounds such as furfural and hydroxymethyl furfural (HMF) which can hinder microbial growth and enzyme activity. Native spent coffee waste was high in hemicellulose content. Galactose was found to be the predominant sugar in spent coffee waste. Results showed that sequential pretreatment yielded 350.12mg of reducing sugar/g of substrate, which was 1.7-fold higher than in native spent coffee waste (203.4mg/g of substrate). Furthermore, extensive delignification was achieved using sequential pretreatment strategy. XRD, FTIR, and DSC profiles of the pretreated substrates were studied to analyse the various changes incurred in sequentially pretreated spent coffee waste as opposed to native spent coffee waste. Copyright © 2017 Elsevier Ltd. All rights reserved.

Visible-Light-Driven Valorization of Biomass Intermediates Integrated with H2 Production Catalyzed by Ultrathin Ni/CdS Nanosheets.

Science.gov (United States)

Han, Guanqun; Jin, Yan-Huan; Burgess, R Alan; Dickenson, Nicholas E; Cao, Xiao-Ming; Sun, Yujie

2017-11-08

Photocatalytic upgrading of crucial biomass-derived intermediate chemicals (i.e., furfural alcohol, 5-hydroxymethylfurfural (HMF)) to value-added products (aldehydes and acids) was carried out on ultrathin CdS nanosheets (thickness ∼1 nm) decorated with nickel (Ni/CdS). More importantly, simultaneous H 2 production was realized upon visible light irradiation under ambient conditions utilizing these biomass intermediates as proton sources. The remarkable difference in the rates of transformation of furfural alcohol and HMF to their corresponding aldehydes in neutral water was observed and investigated. Aided by theoretical computation, it was rationalized that the slightly stronger binding affinity of the aldehyde group in HMF to Ni/CdS resulted in the lower transformation of HMF to 2,5-diformylfuran compared to that of furfural alcohol to furfural. Nevertheless, photocatalytic oxidation of furfural alcohol and HMF under alkaline conditions led to complete transformation to the respective carboxylates with concomitant production of H 2 .

Implementation of the method for the determination of lactulose (4-O-β-D-Galactopyranosyl-D-Fructofuranose) and HMF (5-hydroxymethyl-2-furaldehyde) in ultra-pasteurized milk (UHT) ultraviolet-visible spectrophotometry

International Nuclear Information System (INIS)

Cardenas Miranda, Jeisson Alberto

2015-01-01

Measurement methods of HMF concentrations and lactulose is implemented and evaluated in low-fat milk (2% fat), subjected to ultra pasteurization process in order to establish indicators of nutritional quality. A protocol is developed for the management of equipment and methodology of the analytical method. The determination methods of HMF and lactulose are validated by ultraviolet visible spectrophotometry. The content of HMF and lactulose is determined in different production batches for 4 months of storage at a temperature of 24 Celsius degrees [es

Dehydration of Sugar Mixture to HMF and Furfural over SO42-/ZrO2-TiO2 Catalyst

Directory of Open Access Journals (Sweden)

Junhua Zhang

2014-05-01

Full Text Available A series of sulfated zirconia-titanium dioxide (SO42-/ZrO2-TiO2 catalysts with different Zr-Ti molar ratios were prepared by a precipitation and impregnation method and characterized by ammonia adsorption/ temperature programmed desorption (NH3-TPD, X-ray diffraction (XRD, and X-ray photoelectron spectroscopy (XPS techniques. The catalysts were used in the catalytic conversion of a sugar mixture (glucose and xylose to 5-hydroxymethylfurfural and furfural in a water/n-butanol reaction system. An optimized yield of 26.0 mol% for 5-hydroxymethylfurfural and 47.5 mol% for furfural was obtained within 2 h at 170 °C over the SO42-/ZrO2-TiO2 catalyst with a Zr-Al molar ratio of 7:3. Catalysts with higher acidity and moderate basicity were more favorable for the formation of the target product.

An in Situ NMR Study of the Mechanism for the Catalytic Conversion of Fructose to 5-Hydroxymethylfurfural and then to Levulinic Acid Using ¹³ C Labeled d -Fructose

Energy Technology Data Exchange (ETDEWEB)

Zhang, Jing [Department of Chemistry and Institute for Atom Efficient; Weitz, Eric [Department of Chemistry and Institute for Atom Efficient

2012-04-26

The pathways for the formation of 5-hydroxymethylfurfural (HMF) by dehydration of d-fructose and for the formation of levulinic acid and formic acid from HMF by rehydration were investigated by in situ13C and 1H NMR using both unlabeled and 13C-labeled fructose. Water or DMSO was used as the solvent with Amberlyst 70, PO43–/niobic acid, or sulfuric acid as catalysts. Only HMF is observed using NMR for fructose dehydration in DMSO with any of the three catalysts or without a catalyst. For each system, results with 13C-labeled fructose indicate that the first carbon (C-1) or sixth carbon (C-6) of fructose maps onto the corresponding carbons of HMF. For fructose dehydration in H2O with a PO43–/niobic acid catalyst, in addition to HMF, furfural was observed as a product. However, we show that furfural is not a reaction product deriving from HMF under our conditions. Rather our data indicate that there is a parallel reaction pathway open to fructose when the reaction takes place in H2O with a PO43–/niobic acid catalyst. The corresponding 13C-labeled results show that the first carbon in fructose maps onto the first carbon (aldehyde carbon) in furfural. Using 13C-enriched HMF formed from dehydration of 13C-labeled fructose in DMSO or H2O, we investigated the pathway for HMF rehydration to levulinic and formic acid. The data in different solvents and with different catalysts are consistent with a common mechanism for HMF rehydration, which results in the C-1 and C-6 carbon of HMF being transformed to the carbon of formic acid and methyl carbon (C-5) of levulinic acid, respectively.

Preparation of riboflavin specifically labeled in the 5'-hydroxymethyl terminus using a vitamin B2-aldehyde-forming enzyme from Schizophyllum commune

International Nuclear Information System (INIS)

Kekelidze, T.N.; Edmondson, D.E.; McCormick, D.B.

1995-01-01

A method is described for synthesis of riboflavin selectively labeled in the hydrogens at the 5'-hydroxymethyl position. In this method, a vitamin B 2 -aldehyde-forming enzyme from Schizophyllum commune is used to specifically and completely oxidize the 5'-hydroxymethyl of riboflavin to the 5'-aldehyde. This reaction is monitored spectrophotometrically by the reduction of 2,6-dichlorophenolindophenol at 600 nm. Appearance of aldehyde product was directly quantitated by reverse-phase high-performance liquid chromatography. Product is extracted from the incubation mixture by phenol after saturation with (NH 4 ) 2 SO 4 and then further purified by benzyl alcohol extraction. The 5'-aldehyde is reduced with appropriately labeled sodium borohydride to yield the vitamin specifically labeled in the 5'-hydroxymethyl group. (author)

5-Hydroxymethylfurfural (5-HMF Production from Hexoses: Limits of Heterogeneous Catalysis in Hydrothermal Conditions and Potential of Concentrated Aqueous Organic Acids as Reactive Solvent System

Directory of Open Access Journals (Sweden)

Nadine Essayem

2012-09-01

Full Text Available 5-Hydroxymethylfurfural (5-HMF is an important bio-sourced intermediate, formed from carbohydrates such as glucose or fructose. The treatment at 150–250 °C of glucose or fructose in pure water and batch conditions, with catalytic amounts of most of the usual acid-basic solid catalysts, gave limited yields in 5-HMF, due mainly to the fast formation of soluble oligomers. Niobic acid, which possesses both Lewis and Brønsted acid sites, gave the highest 5-HMF yield, 28%, when high catalyst/glucose ratio is used. By contrast, we disclose in this work that the reaction of fructose in concentrated aqueous solutions of carboxylic acids, formic, acetic or lactic acids, used as reactive solvent media, leads to the selective dehydration of fructose in 5-HMF with yields up to 64% after 2 hours at 150 °C. This shows the potential of such solvent systems for the clean and easy production of 5-HMF from carbohydrates. The influence of adding solid catalysts to the carboxylic acid media was also reported, starting from glucose.

Furfural and its biochar improve the general properties of a saline soil

Science.gov (United States)

Wu, Y.; Xu, G.; Shao, H. B.

2014-07-01

Organic materials (e.g., furfural residue) are generally believed to improve the physical and chemical properties of saline soils with low fertility. Recently, biochar has been received more attention as a possible measure to improve the carbon balance and improve soil quality in some degraded soils. However, little is known about their different amelioration of a sandy saline soil. In this study, 56 d incubation experiment was conducted to evaluate the influence of furfural and its biochar on the properties of saline soil. The results showed that both furfural and biochar greatly reduced pH, increased soil organic carbon (SOC) content and cation exchange capacity (CEC), and enhanced the available phosphorus (P) in the soil. Furfural is more efficient than biochar in reducing pH: 5% furfural lowered the soil pH by 0.5-0.8 (soil pH: 8.3-8.6), while 5% biochar decreased by 0.25-0.4 due to the loss of acidity in pyrolysis process. With respect to available P, furfural addition at a rate of 5% increased available P content by 4-6 times in comparison to 2-5 times with biochar application. In reducing soil exchangeable sodium percentage (ESP), biochar is slightly superior to furfural because soil ESP reduced by 51% and 43% with 5% furfural and 5% biochar at the end of incubation. In addition, no significant differences were observed between furfural and biochar about their capacity to retain N, P in leaching solution and to increase CEC in soil. These facts may be caused by the relatively short incubation time. In general, furfural and biochar exhibited a different effect depending on the property: furfural was more effective in decreasing pH and increasing available P, whereas biochar played a more important role in increasing SOC and reducing ESP of saline soil.

Identification of bitter compounds in whole wheat bread.

Science.gov (United States)

Jiang, Deshou; Peterson, Devin G

2013-11-15

Bitterness in whole wheat bread can negatively influence product acceptability and consumption. The overall goal of this project was to identify the main bitter compounds in a commercial whole wheat bread product. Sensory-guided fractionation of the crust (most bitter portion of the bread sample) utilising liquid-liquid extraction, solid-phase extraction, ultra-filtration and 2-D offline RPLC revealed multiple bitter compounds existed. The compounds with the highest bitterness intensities were selected and structurally elucidated based on accurate mass-TOF, MS/MS, 1D and 2D NMR spectroscopy. Eight bitter compounds were identified: Acortatarins A, Acortatarins C, 5-(hydroxymethyl)furfural(HMF), 2,3-dihydro-3,5-dihydroxy-6-methyl-4(H)-pyran-4-one (DDMP), N-(1-deoxy-d-fructos-1-yl)-l-tryptophan (ARP), Tryptophol (TRO), 2-(2-formyl-5-(hydroxymethyl-1H-pyrrole-1-yl)butanoic acid (PBA) and Tryptophan (TRP). Based on the structures of these compounds, two main mechanisms of bitterness generation in wheat bread were supported, fermentation and Maillard pathways. Copyright © 2013 Elsevier Ltd. All rights reserved.

Ethanol Production from Lignocellulose by the Dimorphic Fungus Mucor Indicus

Energy Technology Data Exchange (ETDEWEB)

Lennartsson, P.R.; Taherzadeh, M.J. (School of Engineering, Univ. of Boraas, SE-50190, Boraas (Sweden)). e-mail: Patrik.Lennartsson@hb.se; Karimi, K. (Dept. of Chemical Engineering, Isfahan Univ. of Technology, 84156-83111, Isfahan (IR)); Edebo, L. (Dept. of Clinical Bacteriology, Univ. of Goeteborg, SE-41346, Goeteborg (Sweden))

2008-10-15

Ethanol production from dilute-acid lignocellulosic hydrolyzate by the dimorphic fungus Mucor indicus was investigated. A mixture of different forest wood chips dominated by spruce was hydrolyzed with 0.5 g/L sulfuric acid at 15 bar for 10 min, yielding different sugars including galactose, glucose, mannose, and xylose, but also different fermentation inhibitors such as acetic acid, furfural, hydroxymethyl furfural (HMF), and phenolic compounds. We induced different morphological growth of M. indicus from purely filamentous, mostly filamentous, mostly yeast-like to purely yeast-like. The different forms were then used to ferment the hydrolyzate. They tolerated the presence of the inhibitors under anaerobic batch cultivation well and the ethanol yield was 430-440 g/kg consumed sugars. The ethanol productivity depended on the morphology. Judging from these results, we conclude that M. indicus, is useful for ethanol production from toxic substrates independent of its morphology. Keywords: bio-ethanol, lignocellulosic materials, dilute acid hydrolysis, Mucor indicus, dimorphic fungi

Selective separation of furfural and hydroxymethylfurfural from an aqueous solution using a supported hydrophobic deep eutectic solvent liquid membrane.

Science.gov (United States)

Dietz, Carin H J T; Kroon, Maaike C; Di Stefano, Michela; van Sint Annaland, Martin; Gallucci, Fausto

2017-12-14

For the first time, 12 different supported deep eutectic solvent (DES) liquid membranes were prepared and characterized. These membranes consist of a polymeric support impregnated with a hydrophobic DES. First, the different membranes were characterized and their stability in water and air was determined. Subsequently, the supported DES liquid membranes were applied for the recovery of furfural (FF) and hydroxymethylfurfural (HMF) from aqueous solutions. The effects of substrate properties (e.g. pore size), DES properties (e.g. viscosity) and concentrations of FF and HMF in the feed phase on the observed diffusivities and permeabilities were assessed. It was found that the addition of DES enhances the transport of FF and HMF through the polymeric membrane support. In particular, the use of the DES consisting of thymol + lidocaine (in the molar ratio 2 : 1) impregnated in a polyethylene support resulted in enhanced transport for both FF and HMF, and is most interesting for (in situ) isolation of FF and HMF from aqueous solutions, e.g. in biorefinery processes.

HEAT TREATMENTS OF HIGH TEMPERATURE DRIED NORWAY SPRUCE BOARDS: SACCHARIDES AND FURFURALS IN SAPWOOD SURFACES

Directory of Open Access Journals (Sweden)

Olov Karlsson,

2012-02-01

Full Text Available Carbohydrates that migrate to wood surfaces in sapwood during drying might influence properties such as mould susceptibility and colour. Sugars on the surface of Norway spruce boards during various heat treatments were studied. Samples (350mmx125mmx25mm were double-stacked, facing sapwood-side outwards, and dried at 110oC to a target moisture content (MC of 40%. Dried sub-samples (80 mm x 125 mm x 25 mm were stacked in a similar way and further heated at 110oC and at 130oC for 12, 24, and 36 hours, respectively. Glucose, fructose, and sucrose as well as 5-hydroxymethylfurfural (HMF and furfural in the sapwood surface layer of treated wood were analysed using HPLC (RI- and UV-detectors. Carbohydrates degraded to a lower extent at 110oC than at 130oC. Furfural and to a larger extent HMF increased with treatment period and temperature. Heat treatment led to a decrease in lightness and hue of the sapwood surface of sub-samples, while chroma increased somewhat. Furthermore, considerably faster degradation (within a few minutes of the carbohydrates on the surface of the dried spruce boards was observed when single sub-samples were conductively hot pressed at 200oC. Treatment period and initial MC influenced the presence of the carbohydrates in wood surface as well as colour change (Eab of the hot pressed sub-samples.

Synthesis of the Insecticide Prothrin and Its Analogues from Biomass-Derived 5-(Cloromethyl)furfural

Science.gov (United States)

2013-12-19

Synthesis of the Insecticide Prothrin and Its Analogues from Biomass-Derived 5‑(Chloromethyl) furfural Fei Chang,† Saikat Dutta,† James J. Becnel...derived platform chemical 5- (chloromethyl) furfural in six steps and overall 65% yield. Two structural analogues of prothrin were also prepared following...insecticidal activities. KEYWORDS: biomass, furans, pyrethroids, synthesis, 5-(chloromethyl) furfural ■ INTRODUCTION Previously, we have described the

Heat treatment of wet wood fiber: A study of the effect of reaction conditions on the formation of furfurals

Science.gov (United States)

Mandla A. Tshabalala; James D. McSweeny; Roger M. Rowell

2012-01-01

Furan monomers are produced when wood is heated at high temperatures. To understand the process conditions for production of furfural (FF) and hydroxymethylfurfural (HMF) from wood, samples of milled aspen wood were subjected to autohydrolyzis by microwave heating in a sealed Teflon reactor. The experiments were designed to simulate temperature and pressure variables...

Pulsed electric field and combination processing of mango nectar: effect on volatile compounds and HMF formation

Directory of Open Access Journals (Sweden)

A. S. Bawa

2015-01-01

Full Text Available Mango nectar is a commercially familiar and preferred product. The traditional processing of mango nectar has been by thermal processing which resulted in the alteration of the flavour of the product due to the effect of high temperature. The thermal processing of the nectar also resulted in the production of byproducts of non-enzymatic browning such as 5- hydroxy methyl furfural (HMF. These process induced effects, affect both the nutritive and sensory attributes of the fruit product, making it less preferable. With the growing interest and awareness about the benefits of alternative non-thermal technologies, such as pulsed electric field (PEF, the present work was proposed to use PEF to minimize the loss of volatiles and formation of HMF. The study involves thermal (96 ºC for 300 s and 600 s, PEF (24 µs, 120 Hz and 38 kV/cm and combination processing (PEF + Thermal (96 ºC for 90 s of mango nectar. The effect of these treatments on the volatile composition of mango nectar has been analysed using GC-MS technique. The reduction in the volatile compounds was significant (p 0.05 different from unprocessed sample, proving the fresh-like character of the product.

Furfural production by 'acidic steam stripping' of lignocellulose.

Science.gov (United States)

van Buijtenen, Jeroen; Lange, Jean-Paul; Espinosa Alonso, Leticia; Spiering, Wouter; Polmans, Rob F; Haan, Rene J

2013-11-01

Furfural and acetic acid are produced with approximately 60 and 90 mol % yield, respectively, upon stripping bagasse with a gaseous stream of HCl/steam and condensing the effluent to water/furfural/acetic acid. The reaction kinetics is 1(st)  order in furfural and 0.5(th)  order in HCl. A process concept with full recycling of the reaction effluents is proposed to reduce the energy demand to furfural-rich phase. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Formation of degradation compounds from lignocellulosic biomass in the biorefinery: sugar reaction mechanisms

DEFF Research Database (Denmark)

Rasmussen, Helena; Sørensen, Hanne R.; Meyer, Anne S.

2014-01-01

, several aldehydes and ketones and many different organic acids and aromatic compounds may be generated during hydrothermal treatment of lignocellulosic biomass. The reaction mechanisms are of interest because the very same compounds that are possible inhibitors for biomass processing enzymes......The degradation compounds formed during pretreatment when lignocellulosic biomass is processed to ethanol or other biorefinery products include furans, phenolics, organic acids, as well as mono- and oligomeric pentoses and hexoses. Depending on the reaction conditions glucose can be converted to 5......-(hydroxymethyl)-2-furaldehyde (HMF) and/or levulinic acid, formic acid and different phenolics at elevated temperatures. Correspondingly, xylose can follow different reaction mechanisms resulting in the formation of furan-2-carbaldehyde (furfural) and/or various C-1 and C-4 compounds. At least four routes...

Dehydration of Sugar Mixture to HMF and Furfural over SO42-/ZrO2-TiO2 Catalyst

OpenAIRE

Junhua Zhang; Junke Li; Lu Lin

2014-01-01

A series of sulfated zirconia-titanium dioxide (SO42-/ZrO2-TiO2) catalysts with different Zr-Ti molar ratios were prepared by a precipitation and impregnation method and characterized by ammonia adsorption/ temperature programmed desorption (NH3-TPD), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) techniques. The catalysts were used in the catalytic conversion of a sugar mixture (glucose and xylose) to 5-hydroxymethylfurfural and furfural in a water/n-butanol reaction sys...

Synthesis of 5-hydroxymethylfurfural (HMF) by acid catalyzed dehydration of glucose-fructose mixtures

DEFF Research Database (Denmark)

Pedersen, Asbjørn Toftgaard; Ringborg, Rolf Hoffmeyer; Grotkjær, Thomas

2015-01-01

allowing the use of the cheapest available source of fructose: high fructose corn syrup. The dehydration was catalyzed by hydrochloric acid and conducted in acetone-water mixtures, which ensured good selectivity towards HMF and eliminated precipitation of polymer by-products (insoluble humins). Through......Synthesis of 5-hydroxymethylfurfural (HMF) from hexoses has been studied extensively in the scientific literature. However, a process has yet to be implemented at industrial scale. In this paper the simultaneous dehydration of glucose and fructose was investigated, in order to develop a process......-products: soluble humins, glucose dimers, anhydroglucose, and formic acid. The reaction conditions in four different reactor configurations were optimized and compared using the kinetic model. It was found that a recirculating reactor setup is preferable, where the equilibrium controlled by-products (anhydroglucose...

Biotransformation of 5-hydroxymethylfurfural (HMF) by Scheffersomyces stipitis during ethanol fermentation of hydrolysate of the seaweed Gelidium amansii.

Science.gov (United States)

Ra, Chae Hun; Jeong, Gwi-Taek; Shin, Myung Kyo; Kim, Sung-Koo

2013-07-01

The seaweed, Gelidium amansii, was fermented to produce bioethanol. Optimal pretreatment condition was determined as 94 mM H2SO4 and 10% (w/v) seaweed slurry at 121°C for 60 min. The mono sugars of 43.5 g/L with 57.4% of conversion from total carbohydrate of 75.8 g/L with G. amansii slurry 100g dcw/L were obtained by thermal acid hydrolysis pretreatment and enzymatic saccharification. G. amansii hydrolysate was used as the substrate for ethanol production by separate hydrolysis and fermentation (SHF). The ethanol concentration of 20.5 g/L was produced by Scheffersomyces stipitis KCTC 7228. The effect of HMF on ethanol production by S. stipitis KCTC 7228 was evaluated and 5-hydroxymethylfurfural (HMF) was converted to 2,5-bis-hydroxymethylfuran. The accumulated 2,5-bis-hydroxymethylfuran in the medium did not affect galactose and glucose uptakes and ethanol production. Biotransformation of HMF to less inhibitory compounds by S. stipitis KCTC 7228 could enhance overall fermentation yields of seaweed hydrolysates to ethanol. Copyright © 2013 Elsevier Ltd. All rights reserved.

Production of furfural from waste aqueous hemicellulose solution of hardwood over ZSM-5 zeolite.

Science.gov (United States)

Gao, Hongling; Liu, Haitang; Pang, Bo; Yu, Guang; Du, Jian; Zhang, Yuedong; Wang, Haisong; Mu, Xindong

2014-11-01

This study aimed to produce furfural from waste aqueous hemicellulose solution of a hardwood kraft-based dissolving pulp production processing in a green method. The maximum furfural yield of 82.4% and the xylose conversion of 96.8% were achieved at 463K, 1.0g ZSM-5, 1.05g NaCl and organic solvent-to-aqueous phase ratio of 30:15 (V/V) for 3h. The furfural yield was just 51.5% when the same concentration of pure xylose solution was used. Under the optimized condition, furfural yield was still up to 67.1% even after the fifth reused of catalyst. Catalyst recycling study showed that ZSM-5 has a certain stability and can be efficiently reused. Copyright © 2014 Elsevier Ltd. All rights reserved.

Monitoring of Growth and Production Characteristics of Red Yeasts Cultivated on Hydrothermally Pretreated Lignocellulosic Pine Material

Directory of Open Access Journals (Sweden)

A. Haronikova

2018-01-01

Full Text Available The aim of this work was to compare the production of carotenes and ergosterol by red yeasts grown on pine lignocellulose substrates. The yeast strains Rhodotorula aurantiaca and Sporobolomyces shibatanus were grown on the liquid fraction of steam pretreated pine (210 °C, catalyst SO2. Biomass production on a pine hydrolysate was lower than on glucose. The highest content of carotenoids and ergosterol in the cells of R. aurantiaca grown on pine hydrolysate was about 1.7 mg g–1 and 0.8 mg g–1 (dwt, respectively, and in S. shibatanus about 0.9 mg g–1 and 0.1 mg g–1, respectively. Hemicellulose hydrolysates may contain many compounds that have inhibitory effects on microorganisms. In this work, the influences of some inhibitors were assessed by cultivating yeasts on media with a representative addition of the selected compounds. From these tests, furfural appears to be the most critical inhibitor, whereas acetic acid and 5-hydroxymethyl furfural (HMF do not affect the growth so much.

Synthesis and steriostructure of 5-(5-R-2- furfur lidene)- barbituric acid

International Nuclear Information System (INIS)

Abdel-Wahab, A.

2012-01-01

Heterocyclic compounds 5-(5-R-2-furfur lidene)- barbituric acid were obtained and their physical and chemical properties were studied. Their structures were identified by spectroscopic methods. This study proved by 1 H-NMR Spectroscopy data that these compounds exist in S-cis form. (author)

Production of xylose, furfural, fermentable sugars and ethanol from agricultural residues

Energy Technology Data Exchange (ETDEWEB)

Singh, A.; Das, K.; Sharma, D.K.

1984-02-01

With the developing shortage of petroleum, reliance on biomass as a source of chemicals and fuels will increase. In the present work, bagasse and rice husk were subjected to dilute acid (H2SO4) hydrolysis using pressurised water to obtain furfural and fermentable sugars. Various process conditions such as particle size, solid-liquid ratio, acid concentration, reaction time and temperature have been studied to optimise yields of furfural, xylose and other fermentable sugars. The use of particle sizes smaller than 495 mu m did not further increase the yield of reducing sugars. A solid-liquid ratio of 1:15 was found to be the most suitable for production of reducing sugars. Hydrolysis using 0.4% H2SO4 at 453 K resulted in selective yields (g per 100 g of dried agricultural residues) of xylose from bagasse (22.5%) and rice husk (21.5%). A maximum yield of furfural was obtained using 0.4% H2SO4 at 473 K from bagasse (11.5%) and rice husk (10.9%). It was also found that hydrolysis using 1% H2SO4 at 493 K resulted in maximum yields of total reducing sugar from bagasse (53.5%) and rice husk (50%). The reducing sugars obtained were fermented to ethanol after removal of furfural. The effect of furfural on the fermentation of sugars to ethanol was also studied. Based on these studies, an integrated two-step process for the production of furfural and fermentable sugars could be envisaged. In the first step, using 0.4% H2SO4 at 473 K, furfural could be obtained, while in the second step, the use of 1% H2SO4 at 493 K should result in the production of fermentable sugars. (Refs. 22).

Furfural Determination with Disposable Polymer Films and Smartphone-Based Colorimetry for Beer Freshness Assessment.

Science.gov (United States)

Rico-Yuste, Alberto; González-Vallejo, Victoria; Benito-Peña, Elena; de Las Casas Engel, Tomás; Orellana, Guillermo; Moreno-Bondi, María Cruz

2016-04-05

We have developed disposable color-changing polymeric films for quantification of furfural-a freshness indicator-in beer using a smartphone-based reader. The films are prepared by radical polymerization of 4-vinylaniline, as a furfural-sensitive indicator monomer, 2-hydroxymethyl methacrylate as a comonomer, and ethylene dimethyl methacrylate (EDMA) as a cross-linker. The sensing mechanism is based on the Stenhouse reaction in which aniline and furfural react in acidic media with the generation of a deep red cyanine derivative, absorbing at 537 nm, which is visible to the naked eye. The colorimetric response has been monitored using either a portable fiber-optic spectrophotometer or the built-in camera of a smartphone. Under the optimized conditions, a linear response to furfural in beer was obtained in the 39 to 500 μg L(-1) range, with a detection limit of 12 μg L(-1), thus improving the performance of other well-established colorimetric or chromatographic methods. The novel films are highly selective to furfural, and no cross-reactivity has been observed from other volatile compounds generated during beer aging. A smartphone application (app), developed for Android platforms, measures the RGB color coordinates of the sensing membranes after exposure to the analyte. Following data processing, the signals are converted into concentration values by preloaded calibration curves. The method has been applied to determination of furfural in pale lager beers with different storage times at room temperature. A linear correlation (r > 0.995) between the storage time and the furfural concentration in the samples has been confirmed; our results have been validated by HPLC with diode-array detection.

Role of oxidative stress and DNA hydroxymethylation in the neurotoxicity of fine particulate matter

International Nuclear Information System (INIS)

Wei, Hongying; Feng, Yan; Liang, Fan; Cheng, Wei; Wu, Xiaomeng; Zhou, Ren; Wang, Yan

2017-01-01

Highlights: • Oxidative stress-mediated neurocytotoxicity and DNA hydroxymethylation abnormalities involved in neuronal pathology of PM 2.5 . • PM 2.5 particles and toxic compounds adsorbed on the particle caused different types of neurocytotoxicity. • DNA hydroxymethylation abnormalities participated in PM 2.5 -induced impairments in neurite outgrowth and synapse formation. - Abstract: Epidemiological studies have implicated fine particulate matter (PM 2.5 ) as a risk factor for neurodegenerative diseases and neurodevelopmental disorders. However, the underlying molecular mechanisms and the influences of different components remain largely elusive. Here, we extended our previous work to investigate the role of oxidative stress and DNA hydroxymethylation in neuronal pathology of PM 2.5 . We found PM 2.5 and its extracts (water-soluble extracts, organic extracts and carbon core component) differentially caused cell cycle arrest, cell apoptosis and the cell proliferation inhibition in neuronal cells. These effects were mechanistically related to each other and oxidative stress, suggesting PM 2.5 and toxic compounds adsorbed on the particles may cause different types of brain damages. In addition, PM 2.5 and its organic extracts increased global DNA hydroxymethylation and gene-specific DNA hydroxymethylation of neuronal genes, and subsequently interfered with their mRNA expression. The impairments in neuronal progression characterized with decreased length of neurite and reduced mRNA expression of neuronal markers and synaptic markers. The blocking effects of antioxidants demonstrated the involvement of oxidative stress-mediated hydroxymethylation abnormalities in PM 2.5 -induced defects in neurite outgrowth and synapse formation. Our results first revealed the role of oxidative stress-mediated abnormal DNA hydroxymethylation in neuronal impairments of PM 2.5 , and thoroughly evaluated the neurocytotoxicity of different components.

[Effect of acetic acid, furfural and 5-hydroxymethylfurfural on production of 2,3-butanediol by Klebsiella oxytoca].

Science.gov (United States)

Wu, Jing; Cheng, Keke; Li, Wenying; Feng, Jie; Zhang, Jian'an

2013-03-01

To get the tolerability and consumption of Klebsiella oxytoca on major inhibitors in lignocelluloses hydrolysate, we studied the effect of acetic acid, furfural and 5-hydroxymethylfurfural on production of 2,3-butanediol by Klebsiella oxytoca. The metabolites of furfural and 5-hydroxymethylfurfural were measured. The results show that when acetic acid, furfural and 5-hydroxymethylfurfural was individually added, tolerance threshold for Klebsiella oxytoca was 30 g/L, 4 g/L and 5 g/L, respectively. Acetic acid was likely used as substrate to produce 2,3-butanediol. The yield of 2,3-butanediol increased when acetic acid concentration was lower than 30 g/L. In the fermentation, more than 70% 5-hydroxymethylfurfural was converted to 2,5-furandimethanol. All furfural and the rest of 5-hydroxymethylfurfural were metabolized by Klebsiella oxytoca. It showed that in the detoxification process of 2,3-butanediol production using lignocelluloses hydrolysate, furfural should be given priority to remove and a certain concentration of acetic acid is not need to removal.

Novel endophytic yeast Rhodotorula mucilaginosa strain PTD3 II: production of xylitol and ethanol in the presence of inhibitors.

Science.gov (United States)

Vajzovic, Azra; Bura, Renata; Kohlmeier, Kevin; Doty, Sharon L

2012-10-01

A systematic study was conducted characterizing the effect of furfural, 5-hydroxymethylfurfural (5-HMF), and acetic acid concentration on the production of xylitol and ethanol by a novel endophytic yeast, Rhodotorula mucilaginosa strain PTD3. The influence of different inhibitor concentrations on the growth and fermentation abilities of PTD3 cultivated in synthetic nutrient media containing 30 g/l xylose or glucose were measured during liquid batch cultures. Concentrations of up to 5 g/l of furfural stimulated production of xylitol to 77 % of theoretical yield (10 % higher compared to the control) by PTD3. Xylitol yields produced by this yeast were not affected in the presence of 5-HMF at concentrations of up to 3 g/l. At higher concentrations of furfural and 5-HMF, xylitol and ethanol yields were negatively affected. The higher the concentration of acetic acid present in a media, the higher the ethanol yield approaching 99 % of theoretical yield (15 % higher compared to the control) was produced by the yeast. At all concentrations of acetic acid tested, xylitol yield was lowered. PTD3 was capable of metabolizing concentrations of 5, 15, and 5 g/l of furfural, 5-HMF, and acetic acid, respectively. This yeast would be a potent candidate for the bioconversion of lignocellulosic sugars to biochemicals given that in the presence of low concentrations of inhibitors, its xylitol and ethanol yields are stimulated, and it is capable of metabolizing pretreatment degradation products.

Comprehensive NMR analysis of compositional changes of black garlic during thermal processing.

Science.gov (United States)

Liang, Tingfu; Wei, Feifei; Lu, Yi; Kodani, Yoshinori; Nakada, Mitsuhiko; Miyakawa, Takuya; Tanokura, Masaru

2015-01-21

Black garlic is a processed food product obtained by subjecting whole raw garlic to thermal processing that causes chemical reactions, such as the Maillard reaction, which change the composition of the garlic. In this paper, we report a nuclear magnetic resonance (NMR)-based comprehensive analysis of raw garlic and black garlic extracts to determine the compositional changes resulting from thermal processing. (1)H NMR spectra with a detailed signal assignment showed that 38 components were altered by thermal processing of raw garlic. For example, the contents of 11 l-amino acids increased during the first step of thermal processing over 5 days and then decreased. Multivariate data analysis revealed changes in the contents of fructose, glucose, acetic acid, formic acid, pyroglutamic acid, cycloalliin, and 5-(hydroxymethyl)furfural (5-HMF). Our results provide comprehensive information on changes in NMR-detectable components during thermal processing of whole garlic.

Synthesis of terephthalic acid via Diels-Alder reactions with ethylene and oxidized variants of 5-hydroxymethylfurfural

Science.gov (United States)

Pacheco, Joshua J.; Davis, Mark E.

2014-01-01

Terephthalic acid (PTA), a monomer in the synthesis of polyethylene terephthalate (PET), is obtained by the oxidation of petroleum-derived p-xylene. There is significant interest in the synthesis of renewable, biomass-derived PTA. Here, routes to PTA starting from oxidized products of 5-hydroxymethylfurfural (HMF) that can be produced from biomass are reported. These routes involve Diels-Alder reactions with ethylene and avoid the hydrogenation of HMF to 2,5-dimethylfuran. Oxidized derivatives of HMF are reacted with ethylene over solid Lewis acid catalysts that do not contain strong Brønsted acids to synthesize intermediates of PTA and its equally important diester, dimethyl terephthalate (DMT). The partially oxidized HMF, 5-(hydroxymethyl)furoic acid (HMFA), is reacted with high pressure ethylene over a pure-silica molecular sieve containing framework tin (Sn-Beta) to produce the Diels-Alder dehydration product, 4-(hydroxymethyl)benzoic acid (HMBA), with 31% selectivity at 61% HMFA conversion after 6 h at 190 °C. If HMFA is protected with methanol to form methyl 5-(methoxymethyl)furan-2-carboxylate (MMFC), MMFC can react with ethylene in the presence of Sn-Beta for 2 h to produce methyl 4-(methoxymethyl)benzenecarboxylate (MMBC) with 46% selectivity at 28% MMFC conversion or in the presence of a pure-silica molecular sieve containing framework zirconium (Zr-Beta) for 6 h to produce MMBC with 81% selectivity at 26% MMFC conversion. HMBA and MMBC can then be oxidized to produce PTA and DMT, respectively. When Lewis acid containing mesoporous silica (MCM-41) and amorphous silica, or Brønsted acid containing zeolites (Al-Beta), are used as catalysts, a significant decrease in selectivity/yield of the Diels-Alder dehydration product is observed. PMID:24912153

Detoxification of a lignocellulosic biomass slurry by soluble polyelectrolyte adsorption for improved fermentation efficiency.

Science.gov (United States)

Carter, Brian; Squillace, Phillip; Gilcrease, Patrick C; Menkhaus, Todd J

2011-09-01

This study investigated the detoxification of a dilute acid pretreated Ponderosa pine slurry using the polyelectrolyte polyethyleneimine (PEI). The addition of polyelectrolyte to remove enzymatic and/or fermentation inhibitory compounds, that is, acetic acid, furfural, and 5-hydroxymethylfurfural (HMF), was performed either before or after enzymatic hydrolysis to determine the optimal process sequence. Negligible acetic acid, glucose, and xylose were removed regardless of where in the process the polymer addition was made. Maximum furfural and HMF separation was achieved with the addition of PEI to a clarified pre-enzymatic hydrolysis liquor, which showed that 88.3% of furfural and 66.4% of HMF could be removed. On the other hand, only 23.1% and 13.4% of furfural and HMF, respectively, were removed from a post-enzymatic hydrolysis sample; thus, the effects of enzymes, glucose, and wood solids on inhibitor removal were also investigated. The presence of solid particles >0.2 µm and unknown soluble components <10 kDa reduced inhibitory compound removal, but the presence of elevated glucose levels and enzymes (cellulases) did not affect the separation. The fermentability of detoxified versus undetoxified hydrolysate was also investigated. An ethanol yield of 92.6% of theoretical was achieved with Saccharomyces cerevisiae fermenting the detoxified hydrolyzate, while no significant ethanol was produced in the undetoxified hydrolyzate. These results indicate that PEI may provide a practical alternative for furan removal and detoxification of lignocellolosic hydrolysates, and that application before enzymatic hydrolysis minimizes separation interferences. Copyright © 2011 Wiley Periodicals, Inc.

Effect of roasting conditions on color and volatile profile including HMF level in sweet almonds (Prunus dulcis).

Science.gov (United States)

Agila, Amal; Barringer, Sheryl

2012-04-01

Microwave, oven, and oil roasting of almonds were used to promote almond flavor and color formation. Raw pasteurized almonds were roasted in a microwave for 1 to 3 min, in an oven at 177 °C for 5, 10, 15, and 20 min; and at 135 and 163 °C for 20 min, and in oil at 135, 163, and 177 °C for 5 min and 177 °C for 10 min. Volatile compounds were quantified in the headspace of ground almonds, both raw and roasted, by selected ion flow tube mass spectrometry. Strong correlations were found between L value, chroma, and 5-(hydroxy methyl)-2- furfural; and were independent of roasting method. Raw almonds had lower concentrations of most volatiles than roasted almonds. Conditions that produced color equivalent to commercial samples were 2 min in the microwave, 5 min at 177 °C in the oven, and 5 min at 135 °C in oil. Microwave heating produced higher levels of most volatiles than oven and oil roasting at commercial color. Sensory evaluation indicated that microwave-roasted almonds had the strongest aroma and were the most preferred. Oil-roasted almonds showed significantly lower levels of volatiles than other methods, likely due to loss of these volatiles into the oil. Alcohols such as benzyl alcohols and strecker aldehydes including benzaldehyde and methional were at higher concentrations than other volatiles in roasted almonds. The oxidation of lipids to form alkanals such as nonanal and degradation of sugars to form furan type compounds was also observed. The Maillard reaction contributed to the formation of more of the total volatiles in almonds than the lipid oxidation reaction. The level of 5-(hydroxy methyl)-2- furfural (HMF), color, volatile profile, and sensory perception can be used to develop the best roasting method, time, and temperature for almonds. The rate of color development and the production of volatiles differ under different roasting conditions. Based on the color, volatile, and sensory assessments of the 3 almonds, the use of microwave technology

Adsorption of the compounds encountered in monosaccharide dehydration in zeolite beta.

Science.gov (United States)

León, Marta; Swift, T Dallas; Nikolakis, Vladimiros; Vlachos, Dionisios G

2013-06-04

A comprehensive study of the adsorption of the compounds involved in the reaction of dehydration of fructose to 5-hydroxymethyl furfural (HMF) on the zeolite H-BEA with SiO2/Al2O3 = 18 has been carried out. Furthermore, a method for the estimation of the real adsorption loading from the experimentally measured excess adsorption is developed and applied to calculate the adsorption isotherms both in the case of single-solute and multisolute mixtures. It was found that zeolite H-BEA adsorbs HMF and levulinic acid from water mixtures to greater extent than sugars and formic acid, which prefer to partition in the aqueous phase. HMF and levulinic acid adsorption isotherms could be fitted in a Redlich-Peterson isotherm model, while the adsorption of formic acid is better fitted using the Freundlich model and sugars via the Henry model. Adsorption loadings decreased with increasing temperature (0, 25, and 40 °C), which is characteristic of an exothermic process. From the temperature dependence of the isotherms, the limiting heat of adsorption at zero coverage was determined using van't Hoff equation. Given the importance and the complexity of multicomponent systems, several experiments of adsorption of multisolute solutions have been carried out. In most of the cases, the ideal adsorbed solution theory (IAST) has been proven to satisfactorily predict adsorption from multisolute mixtures using as input the single-solute isotherms.

Simulating adsorptive expansion of zeolites: application to biomass-derived solutions in contact with silicalite.

Science.gov (United States)

Santander, Julian E; Tsapatsis, Michael; Auerbach, Scott M

2013-04-16

We have constructed and applied an algorithm to simulate the behavior of zeolite frameworks during liquid adsorption. We applied this approach to compute the adsorption isotherms of furfural-water and hydroxymethyl furfural (HMF)-water mixtures adsorbing in silicalite zeolite at 300 K for comparison with experimental data. We modeled these adsorption processes under two different statistical mechanical ensembles: the grand canonical (V-Nz-μg-T or GC) ensemble keeping volume fixed, and the P-Nz-μg-T (osmotic) ensemble allowing volume to fluctuate. To optimize accuracy and efficiency, we compared pure Monte Carlo (MC) sampling to hybrid MC-molecular dynamics (MD) simulations. For the external furfural-water and HMF-water phases, we assumed the ideal solution approximation and employed a combination of tabulated data and extended ensemble simulations for computing solvation free energies. We found that MC sampling in the V-Nz-μg-T ensemble (i.e., standard GCMC) does a poor job of reproducing both the Henry's law regime and the saturation loadings of these systems. Hybrid MC-MD sampling of the V-Nz-μg-T ensemble, which includes framework vibrations at fixed total volume, provides better results in the Henry's law region, but this approach still does not reproduce experimental saturation loadings. Pure MC sampling of the osmotic ensemble was found to approach experimental saturation loadings more closely, whereas hybrid MC-MD sampling of the osmotic ensemble quantitatively reproduces such loadings because the MC-MD approach naturally allows for locally anisotropic volume changes wherein some pores expand whereas others contract.

Conversion of fructose-glucose mixtures to 5-hydroxymethylfurfural (HMF) in a biphasic slug-flow microreactor setup

NARCIS (Netherlands)

Deuss, Peter; Zhang, Zheng; Lubach, Bouke; Hacking, Jasper; Yue, Jun; Heeres, Hero

The production of platform chemicals from lignocellulosic biomass is one of the main targets to enable future sustainable chemical industry.[1][2] 5-hydroxymethylfurfural (HMF) has been identified as one of the most important platform chemicals that can be obtained from the sugar fraction of

Research Progress on Furfural Residues Recycling : A Literature Review

NARCIS (Netherlands)

Dai, Chun'ai; Liu, Bo; Girisuta, B.; Heeres, H.J.

2010-01-01

Millions of tons of furfural residues from the furfural industry are produced every year in China. Proper recycling of these residues is highly desirable as it may reduce associated environmental problems and increase the economic viability of the furfural industry. Research progress on furfural

Detoxification of Eucheuma spinosum Hydrolysates with Activated Carbon for Ethanol Production by the Salt-Tolerant Yeast Candida tropicalis.

Science.gov (United States)

Ra, Chae Hun; Jung, Jang Hyun; Sunwoo, In Young; Kang, Chang Han; Jeong, Gwi-Taek; Kim, Sung-Koo

2015-06-01

The objective of this study was to optimize the slurry contents and salt concentrations for ethanol production from hydrolysates of the seaweed Eucheuma spinosum. A monosaccharide concentration of 44.2 g/l as 49.6% conversion of total carbohydrate of 89.1 g/l was obtained from 120 g dw/l seaweed slurry. Monosaccharides from E. spinosum slurry were obtained by thermal acid hydrolysis and enzymatic hydrolysis. Addition of activated carbon at 2.5% (w/v) and the adsorption time of 2 min were used in subsequent adsorption treatments to prevent the inhibitory effect of HMF. The adsorption surface area of the activated carbon powder was 1,400-1,600 m(2)/g and showed selectivity to 5-hydroxymethyl furfural (HMF) from monosaccharides. Candida tropicalis KCTC 7212 was cultured in yeast extract, peptone, glucose, and high-salt medium, and exposed to 80, 90, 100, and 110 practical salinity unit (psu) salt concentrations in the lysates. The 100 psu salt concentration showed maximum cell growth and ethanol production. The ethanol fermentations with activated carbon treatment and use of C. tropicalis acclimated to a high salt concentration of 100 psu produced 17.9 g/l of ethanol with a yield (YEtOH) of 0.40 from E. spinosum seaweed.

REKAYASA PROSES HIDROLISIS PATI DAN SERAT UBI KAYU (Manihot utilissima UNTUK PRODUKSI BIOETANOL Hydrolysis Process Design of Starch and Cassava (Manihot utilissima Fibers for Bioethanol Production

Directory of Open Access Journals (Sweden)

Yuana Susmiati

2012-05-01

Full Text Available Ethanol production from cassava (Manihot utilissima usually uses enzymatic process for starch hydrolysis. Enzymatichydrolysis by α-amylase and amyloglucosidase enzymes are not able to convert cassava fibers into sugars. Dilute acid hydrolysis is applied to convert both starch and fibers, which will increase the yield of simple sugars as fermentable sugars and resulting in high ethanol production. In this research there are two steps of dilute acid hydrolysis, first for starch hydrolysis at H SO concentration of 0.1-0.5 M, 5-15 minutes and second for fiber hydrolysis at 0.5-1.0 2 4M H SO , 10-20 minutes, at the same temperature of 121-127 oC and pressure of 1.0-1.5 atm. The disadvantage of acid hydrolysis is the formation of toxic compounds such as hydroxymethyl furfural (HMF which is inhibited yeast fermentation. Therefore, acid hydrolyzates were detoxified with NH OH before use as fermentation substrate. The best starch hydrolysis condition was obtained at 0.4 M H SO  for 10 minutes which gave 257.37 g/l of total sugars, 2 4229.38 g/l of reducing sugars, 89.59 of dextrose equivalent (DE and 0.57 g/l of HMF. While the best fiber hydrolysis performed at 1.0 M H SO  solution for 20 minutes which gave 79.74 g/l of total sugars, 70.88 g/l of reducing sugars, 2 488.99 of DE and 0.0142 g/l of HMF. Single direct acid hydrolysis was the most suitable substrate for yeast fermentationwith the ethanol concentration of 5.7 % (w/v and 30.5 % (w/w of ethanol yield. This result is comparable with enzymatic hydrolysis which gave ethanol yield of 30 % (w/w. ABSTRAK Produksi etanol dari ubi kayu biasanya menggunakan enzim untuk menghidrolisis pati. Hidrolisis secara enzimatismenggunakan enzim α-amilase dan amiloglukosidase tidak mampu mengkonversi serat menjadi gula. Hidrolisis asam  berkonsentrasi  rendah  dilakukan  untuk  mengkonversi  pati  dan  serat,  sehingga  gula-gula  sederhana  yang dapat difermentasi meningkat dan menghasilkan

Furfural from Pine Needle Extract Inhibits the Growth of a Plant Pathogenic Fungus, Alternaria mali

Science.gov (United States)

Yoo, Sun Kyun; Moon, Sung-Kwon; Lee, Ung-Soo

2007-01-01

The antifungal effect of pine needle extract prepared by a distinguishable extraction method and the dry distillation method, was examined. The effect of this extract itself was insignificant. The chemical components of pine needle extract were then investigated by gas chromatographic analysis, and four chemical components, acetol, furfural, 5-methyl furfural, and terpine-4-ol, were identified. The antifungal effects of those four chemical components against Alternaria mali (A. mali), an agent of Alternaria blotch of apple, were then examined. It was observed that the minimum inhibitory concentrations (MICs) were 6.25, 0.78, 0.78, and 12.5 (mg/ml) of acetol, furfural, 5-methyl furfural, and terpine-4-ol, respectively. MICs of furfural and 5-methyl furfural had the same order of magnitude as that of an antifungal agrochemical, chlorothalonil. Although furfural itself can not be completely substituted for an antifungal agrochemical, a partial mixture of furfural and antifungal agrochemical may be used as a substitute. The use of agrochemicals for the prevention of plant disease caused by pathogenic fungus such as A. mali could be partially reduced by the application of this mixture. PMID:24015067

Study of Liquid Alkanes Production from Biomass-Derived Carbohydrates by Aldol-Condensation and Hydrogenation Processes

Directory of Open Access Journals (Sweden)

Navadol Laosiripojana

2010-10-01

Full Text Available This research aims to synthesis liquid alkanes from biomass-derived hydroxyl methyl furfural (HMF and furfural by aldol-condensation and hydrogenation processes over several catalysts i.e. TiO2, TiO2-ZrO2, Pd/Al2O3 and Pd/CeO2. It was found that the catalysts make significant impact on the selectivity and yield of alkanes product. It is noted that Pd/Al2O3 provided the highest alkane yield and selectivity. The aldol-condensation and hydrogenation of HMF over Pd/Al2O3 provide high C12 selectivity whereas the aldol-condensation and hydrogenation of furfural over Pd/Al2O3 provide high C8 selectivity. The effects of reaction temperature, reaction pressure and reaction time were then studied. The effect of inlet furfural to acetone molar ratio was also determined. It was also found that the optimized conditions to maximize the yield of alkane production from the aldol-condensation/hydrogenation of HMF and furfural are (i at 53oC and 24 hr for aldol-condenstation of HMF, (ii 80oC and 24 hr for aldol-condenstation of furfural, and (iii 120oC for 6 hr with HMF to acetone molar ratio of 3:1 and furfural to acetone molar ratio of 4:1 in the presence of Pd/Al2O3 (calcined at 500oC for hydrogenation reaction.

Increased 5-hydroxymethylation levels in the sub ventricular zone of the Alzheimer's brain

Directory of Open Access Journals (Sweden)

Diego Mastroeni

2016-06-01

Full Text Available The subventricular zone (SVZ is a site of neurogenesis in the aging brain, and epigenetic mechanisms have been implicated in regulating the “normal” distribution of new nerve cells into the existing cellular milieu. In a case-control study of human primary SVZ cultures and fixed tissue from the same individuals, we have found significant increases in DNA hydroxymethylation levels in the SVZ of Alzheimer's disease patients compared with nondiseased control subjects. We show that this increase in hydroxymethylation directly correlates to an increase in cellular proliferation in Alzheimer's disease precursor cells, which implicates the hydroxymethylation tag to a higher degree of cellular proliferation.

Separate hydrolysis and fermentation (SHF) of Prosopis juliflora, a woody substrate, for the production of cellulosic ethanol by Saccharomyces cerevisiae and Pichia stipitis-NCIM 3498.

Science.gov (United States)

Gupta, Rishi; Sharma, Krishna Kant; Kuhad, Ramesh Chander

2009-02-01

Prosopis juliflora (Mesquite) is a raw material for long-term sustainable production of cellulosics ethanol. In this study, we used acid pretreatment, delignification and enzymatic hydrolysis to evaluate the pretreatment to produce more sugar, to be fermented to ethanol. Dilute H(2)SO(4) (3.0%,v/v) treatment resulted in hydrolysis of hemicelluloses from lignocellulosic complex to pentose sugars along with other byproducts such as furfural, hydroxymethyl furfural (HMF), phenolics and acetic acid. The acid pretreated substrate was delignified to the extent of 93.2% by the combined action of sodium sulphite (5.0%,w/v) and sodium chlorite (3.0%,w/v). The remaining cellulosic residue was enzymatically hydrolyzed in 0.05 M citrate phosphate buffer (pH 5.0) using 3.0 U of filter paper cellulase (FPase) and 9.0 U of beta-glucosidase per mL of citrate phosphate buffer. The maximum enzymatic saccharification of cellulosic material (82.8%) was achieved after 28 h incubation at 50 degrees C. The fermentation of both acid and enzymatic hydrolysates, containing 18.24 g/L and 37.47 g/L sugars, with Pichia stipitis and Saccharomyces cerevisiae produced 7.13 g/L and 18.52 g/L of ethanol with corresponding yield of 0.39 g/g and 0.49 g/g, respectively.

Determinação do 5-hidroximetilfurfural em méis utilizando cromatografia eletrocinética capilar micelar Determination of 5-hydroxymethyl-2-furaldehyde in honey by micellar eletrokinetic capillary electrophoresis

Directory of Open Access Journals (Sweden)

Sandra Jussara Nunes da Silva

2008-12-01

Full Text Available Neste trabalho foi investigado o índice de HMF (5-hidroximetilfurfural em méis comercializados em Porto Alegre - RS, utilizando Cromatografia Capilar Eletrocinética Micelar. O HMF, produto da condensação da frutose, é um indicador da qualidade e conservação do mel. Foram analisadas 11 marcas de méis comercializados na cidade de Porto Alegre. O composto estudado esteve presente em todas as amostras, em um intervalo de concentração de 0,191 a 6,206 mg.kg-1. Para quantificar o HMF presente nos méis, utilizou-se a técnica de adição de padrão. A taxa de recuperação foi de 98% e o limite de detecção foi de 0,025 mg.kg-1. O limite permitido de HMF em méis, segundo a legislação brasileira, é de 60 mg.kg-1.In this work, the occurrence of HMF (5-hydroxymethylfurfural in honey marketed in Porto Alegre - RS was investigated using Micellar Electrokinetic Capillary Chromatography. The HMF, which is the product of the fructose condensation, is an indicator of honey quality and conservation. Eleven types of honey commercialized in Porto Alegre were analyzed, and all of them contained HMF in a range from 0.191 to 6.206 mg.kg-1. In order to quantify the HMF present in the samples, the technique of standard addition was employed. The recovery was 98% and the detection limit was 0.025 mg.kg-1. The allowed limit of HMF in honey, according to the Brazilian Legislation, is 60 mg.kg-1.

A convenient method for 14C-labeling of 2-methylthio-1-[4-N-α-ethoxycarbonylbenzyl)-amino-benzyl] -5-hydroxymethyl-2-[14C]-1H-imidazole and 1-[4-N-α-ethoxy-carbonylbenzyl)-aminobenzyl]-5-hydroxymethyl-2-[14C] -1H-imidazole as potential antihypertensives

International Nuclear Information System (INIS)

Nader Saemian; Gholamhossein Shirvani; Mohsen Javaheri; Sayed Sajad Oliyaee

2012-01-01

The key synthetic intermediate, (2-mercapto-1-(4-nitrobenzyl)-1H-imidazol-5-yl)methanol-[2- 14 C], has been synthesized by using one pot procedure from potassium[ 14 C]-thiocyanate. It was converted to two nonpeptide angiotensin II receptor antagonists, 2-methylthio-1-[4-N-α-ethoxycarbonyl benzyl)-aminobenzyl]-5-hydroxymethyl-1H-imidazole-[2- 14 C] and 1-[4-N-α-ethoxy-carbonylbenzyl)-aminobenzyl] -5-hydroxymethyl-1H-imidazole-[2- 14 C] via a 3-step sequence synthetic pathway. (author)

HMF-Geophysics - An Update

Science.gov (United States)

Crook, N.; Knight, R.; Robinson, D.

2007-12-01

There is growing recognition of the challenges we face, in many parts of the world, in finding and maintaining clean sources of water for human consumption and agricultural use, while balancing the needs of the natural world. Advancements in hydrologic sciences are needed in order to develop an improved understanding of the controls on the quantity, movement, and quality of water, thus enhancing our ability to better protect and manage our water resources. Geophysical methods can play a central role in these investigations. CUAHSI (Consortium of Universities for the Advancement of Hydrologic Sciences) is developing, with the support of the National Science Foundation, a Hydrologic Measurement Facility (HMF), which contains a Geophysics module, referred to as HMF-Geophysics. The Geophysics module will support and advance the use of geophysics for hydrologic applications. Currently in second year of a 3 year pilot study, the main aim of HMF-Geophysics is to develop the infrastructure necessary to provide geophysical techniques and the expertise to apply them correctly for the hydrological community. The current working model consists of a central HMF-Geophysics facility and a number of volunteer nodes. The latter consists of individuals at universities who have volunteered to be part of HMF-Geophysics by using their equipment, and/or software, and expertise, in research partnerships with hydrologists. In response to an inquiry the central facility takes on the evaluation of the potential of geophysics to the area of research/watershed. The central facility can then undertake a feasibility study to determine how/if geophysical methods could be of use, and to evaluate the "value-added" by geophysics to the science. Once it is clear that the geophysics can contribute in a significant way to addressing the science questions the central facility works with the hydrologist to set up the next step. Our assumption is that at this point, the hydrologist (perhaps with a

Effect of Furfural on Saccharomyces carlsbergensis Growth, Physiology and Ethanol Production.

Science.gov (United States)

Lopes da Silva, Teresa; Santo, Rui; Reis, Alberto; Passarinho, Paula C

2017-06-01

This work described the effect of furfural, a product resulting from the lignocellulosic material pretreatment, on Saccharomyces carlsbergensis growth and ethanol production. Flow cytometry was used to evaluate the yeast membrane potential, membrane integrity, reactive oxygen species production and lipid content. Above 0.3 g/L of furfural, a progressive decrease in the maximal specific growth rate was observed, reaching 53% of the value obtained in the absence of toxic when the cells were grown in the presence of 4 g/L of furfural. In general, the yeast biomass concentration and yield were less affected by the furfural presence than the specific growth rate, and a maximum reduction of 25% was observed for the assay at 4 g/L. The ethanol production was even less affected by the furfural presence than the yeast growth. At 4 g/L of furfural, the maximum ethanol concentration was reduced by only 10% relatively to the maximum ethanol concentration observed in the absence of toxic. At 5 g/L of furfural, the yeast cells were barely able to keep metabolic functions and produced a final ethanol concentration of 0.87 g/L although growth was undetectable. S. carlsbergensis membrane potential was affected by the furfural presence, concomitantly with the ethanol production. However, at 4 g/L, most of the yeast cells (90%) displayed the cytoplasmic membrane depolarized. The proportion of cells with increasing reactive oxygen species (ROS) production levels increased for the experiments at 0-4 g/L. For the experiment at 4.5 g/L of furfural, ROS production was observed for only 11% of the yeast cells. The yeast lipid content was also severely affected by the furfural presence. Both polar and neutral lipids decreased in the presence of furfural, and this reduction was more notorious during the stationary phase.

Kinetic study of the thermal hydrolysis of Agave salmiana for mezcal production.

Science.gov (United States)

Garcia-Soto, M J; Jimenez-Islas, H; Navarrete-Bolanos, J L; Rico-Martinez, R; Miranda-Lopez, R; Botello-Alvarez, J E

2011-07-13

The kinetics of the thermal hydrolysis of the fructans of Agave salmiana were determined during the cooking step of mezcal production in a pilot autoclave. Thermal hydrolysis was achieved at different temperatures and cooking times, ranging from 96 to 116 °C and from 20 to 80 h. A simple kinetic model of the depolymerization of fructans to monomers and other reducing sugars and of the degradation of reducing sugars to furans [principally 5-(hydroxymethyl)furfural, HMF] was developed. From this model, the rate constants of the reactions were calculated, as well as the pre-exponential factors and activation energies of the Arrhenius equation. The model was found to fit the experimental data well. The tradeoff between a maximum fructan hydrolysis and a critical furan concentration in allowing for the best ethanol yield during fermentation was investigated. The results indicated that the thermal hydrolysis of agave was optimal, from the point of view of ethanol yield in the ensuing fermentation, in the temperature range of 106-116 °C and the cooking range time of 6-14 h. The optimal conditions corresponded to a fructan hydrolysis of 80%, producing syrups with furan and reducing sugar concentrations of 1 ± 0.1 and 110 ± 10 g/L, respectively.

Solvent Extraction of Furfural From Biomass

Science.gov (United States)

Humphrey, M. F.

1984-01-01

Solvent-extraction method reduces energy required to remove furfural produced during acid hydrolysis of biomass. Acid hydrolysis performed in vessel containing both solvents and reacting ingredients. With intimate contact between solvents and aqueous hydrolyis liqour, furfural removed form liquor almost as fast as it forms.

[Effects of furfural on the growth and lipid production of oleaginous yeast Rhodotorula glutinis].

Science.gov (United States)

Yong, Zihan; Zhang, Xu; Tan, Tianwei

2015-10-01

In order to illustrate the effects of furfural, one of the most common inhibitory compounds in lignocellulosic hydrolysate, on oleaginous yeast Rhodotorula glutinis, we investigated the effects of different concentrations of furfural (0.1, 0.4, 0.6 and 1.5 g/L) on the biomass and lipid production of R. glutinis, as well as the effects of 1.0 g/L furfural on the utilization of glucose and xylose. Results showed that: when the furfural concentration reached 1.5 g/L, the lag phrase time was extended to 96 h, and the residual glucose was up to 17.7 g/L, with maximum biomass of only 6.6 g/L, which accounted for 47% of that in the basic medium (furfural-free), and the corresponding lipid content was reduced about 50%. Furfural showed lighter inhibitory degree on R. glutinis when xylose acted as the carbon source than glucose was the carbon source; more C18 fatty acids or unsaturated C18 fatty acids were generated in the presence of furfural.

A Novel Method for the Discrimination of Semen Arecae and Its Processed Products by Using Computer Vision, Electronic Nose, and Electronic Tongue

Directory of Open Access Journals (Sweden)

Min Xu

2015-01-01

Full Text Available Areca nut, commonly known locally as Semen Arecae (SA in China, has been used as an important Chinese herbal medicine for thousands of years. The raw SA (RAW is commonly processed by stir-baking to yellow (SBY, stir-baking to dark brown (SBD, and stir-baking to carbon dark (SBC for different clinical uses. In our present investigation, intelligent sensory technologies consisting of computer vision (CV, electronic nose (E-nose, and electronic tongue (E-tongue were employed in order to develop a novel and accurate method for discrimination of SA and its processed products. Firstly, the color parameters and electronic sensory responses of E-nose and E-tongue of the samples were determined, respectively. Then, indicative components including 5-hydroxymethyl furfural (5-HMF and arecoline (ARE were determined by HPLC. Finally, principal component analysis (PCA and discriminant factor analysis (DFA were performed. The results demonstrated that these three instruments can effectively discriminate SA and its processed products. 5-HMF and ARE can reflect the stir-baking degree of SA. Interestingly, the two components showed close correlations to the color parameters and sensory responses of E-nose and E-tongue. In conclusion, this novel method based on CV, E-nose, and E-tongue can be successfully used to discriminate SA and its processed products.

The VFH1 (YLL056C) promoter is vanillin-inducible and enables mRNA translation despite pronounced translation repression caused by severe vanillin stress in Saccharomyces cerevisiae.

Science.gov (United States)

Nguyen, Trinh Thi My; Ishida, Yoko; Kato, Sae; Iwaki, Aya; Izawa, Shingo

2018-03-25

Vanillin, furfural, and 5-hydroxymethylfurfural (HMF) are representative fermentation inhibitors generated during the pretreatment process of lignocellulosic biomass in bioethanol production. These biomass conversion inhibitors, particularly vanillin, are known to repress translation activity in Saccharomyces cerevisiae. We have reported that the mRNAs of ADH7 and BDH2 were efficiently translated under severe vanillin stress despite marked repression of overall protein synthesis. In this study, we found that expression of VFH1 (YLL056C) was also significantly induced at the protein level by severe vanillin stress. Additionally, we demonstrated that the VFH1 promoter enabled the protein synthesis of other genes including GFP and ALD6 under severe vanillin stress. It is known that transcriptional activation of VFH1 is induced by furfural and HMF, and we herein verified that Vfh1 protein synthesis was also induced by furfural and HMF. The null mutant of VFH1 delayed growth in the presence of vanillin, furfural, and HMF, indicating the importance of Vfh1 for sufficient tolerance against these inhibitors. The protein levels of Vfh1 induced by the inhibitors tested were markedly higher than those of Adh7 and Bdh2, suggesting the superior utility of the VFH1 promoter over the ADH7 or BDH2 promoter for breeding optimized yeast strains for bioethanol production from lignocellulosic biomass. This article is protected by copyright. All rights reserved.

Fast pyrolysis of corn stover using ZnCl2: Effect of washing treatment on the furfural yield and solvent extraction of furfural

International Nuclear Information System (INIS)

Oh, Seung-Jin; Choi, Gyung-Goo; Kim, Joo-Sik

2015-01-01

To produce a bio-oil having a high concentration of furfural, corn stover was fast-pyrolyzed using ZnCl 2 in a fluidized bed reactor at 330–430 °C. The effects of various parameters such as reaction temperature, water- and acid-washing prior to pyrolysis, and ZnCl 2 content on the product and furfural yields were investigated. Moreover, solvent extraction was conducted using toluene at different mass ratios of bio-oil/toluene to recover furfural from the obtained bio-oil. The maximum yield of bio-oil was 59 wt%. The bio-oil mainly comprised acetic acid, α-hydroxyketones, and furfural. The maximum furfural yield was 11.5 wt% when the feed material was water-washed, impregnated with 18.5 wt% ZnCl 2 , and pyrolyzed. Although acid-washing removed alkali and alkaline earth metals much more efficiently than water-washing, water-washing was better than acid-washing for the furfural production. Toluene extraction was very effective to recover furfural from bio-oil. The maximum recovery rate (82%) was achieved at a bio-oil/toluene ratio of 1:4. - Highlights: • Corn stover pretreated and impregnated with ZnCl 2 was successfully pyrolyzed. • Furfural was recovered from bio-oil by extraction using toluene. • Water-washing was better than acid-washing for the furfural production. • The highest furfural yield was 11.5 wt% of the product. • The highest furfural recovery rate was 82%

Furfural induces reactive oxygen species accumulation and cellular damage in Saccharomyces cerevisiae

Directory of Open Access Journals (Sweden)

Slininger Patricia J

2010-01-01

Full Text Available Abstract Background Biofuels offer a viable alternative to petroleum-based fuel. However, current methods are not sufficient and the technology required in order to use lignocellulosic biomass as a fermentation substrate faces several challenges. One challenge is the need for a robust fermentative microorganism that can tolerate the inhibitors present during lignocellulosic fermentation. These inhibitors include the furan aldehyde, furfural, which is released as a byproduct of pentose dehydration during the weak acid pretreatment of lignocellulose. In order to survive in the presence of furfural, yeast cells need not only to reduce furfural to the less toxic furan methanol, but also to protect themselves and repair any damage caused by the furfural. Since furfural tolerance in yeast requires a functional pentose phosphate pathway (PPP, and the PPP is associated with reactive oxygen species (ROS tolerance, we decided to investigate whether or not furfural induces ROS and its related cellular damage in yeast. Results We demonstrated that furfural induces the accumulation of ROS in Saccharomyces cerevisiae. In addition, furfural was shown to cause cellular damage that is consistent with ROS accumulation in cells which includes damage to mitochondria and vacuole membranes, the actin cytoskeleton and nuclear chromatin. The furfural-induced damage is less severe when yeast are grown in a furfural concentration (25 mM that allows for eventual growth after an extended lag compared to a concentration of furfural (50 mM that prevents growth. Conclusion These data suggest that when yeast cells encounter the inhibitor furfural, they not only need to reduce furfural into furan methanol but also to protect themselves from the cellular effects of furfural and repair any damage caused. The reduced cellular damage seen at 25 mM furfural compared to 50 mM furfural may be linked to the observation that at 25 mM furfural yeast were able to exit the furfural

Selective inhibition of CTCF binding by iAs directs TET-mediated reprogramming of 5-hydroxymethylation patterns in iAs-transformed cells

Science.gov (United States)

Rea, Matthew; Gripshover, Tyler; Fondufe-Mittendorf, Yvonne

2017-01-01

Methylation at cytosine (5mC) is a fundamental epigenetic DNA modification recently associated with iAs-mediated carcinogenesis. In contrast, the role of 5-hydroxymethylcytosine (5hmC), the oxidation product of 5mC in iAs-mediated carcinogenesis is unknown. Here we assess the hydroxymethylome in iAs-transformed cells, showing that dynamic modulation of hydroxymethylated DNA is associated with specific transcriptional networks. Moreover, this pathologic iAs-mediated carcinogenesis is characterized by a shift toward a higher hydroxymethylation pattern genome-wide. At specific promoters, hydroxymethylation correlated with increased gene expression. Furthermore, this increase in hydroxymethylation occurs concurrently with an upregulation of ten-eleven translocation (TET) enzymes that oxidize 5-methylcytosine (5mC) in DNA. To gain an understanding into how iAs might impact TET expression, we found that iAs inhibits the binding of CTCF at the proximal, weak CTCF binding sites of the TET1 and TET2 gene promoters and enhances CTCF binding at the stronger distal binding site. Further analyses suggest that this distal site acts as an enhancer, thus high CTCF occupancy at the enhancer region of TET1 and TET2 possibly drives their high expression in iAs-transformed cells. These results have major implications in understanding the impact of differential CTCF binding, genome architecture and its consequences in iAs-mediated pathogenesis. PMID:29175454

Intracellular metabolite profiling of Saccharomyces cerevisiae evolved under furfural

OpenAIRE

Jung, Young Hoon; Kim, Sooah; Yang, Jungwoo; Seo, Jin?Ho; Kim, Kyoung Heon

2016-01-01

Summary Furfural, one of the most common inhibitors in pre?treatment hydrolysates, reduces the cell growth and ethanol production of yeast. Evolutionary engineering has been used as a selection scheme to obtain yeast strains that exhibit furfural tolerance. However, the response of Saccharomyces cerevisiae to furfural at the metabolite level during evolution remains unknown. In this study, evolutionary engineering and metabolomic analyses were applied to determine the effects of furfural on y...

Pre-treatment step with Leuconostoc mesenteroides or L. pseudomesenteroides strains removes furfural from Zymomonas mobilis ethanolic fermentation broth.

Science.gov (United States)

Hunter, William J; Manter, Daniel K

2014-10-01

Furfural is an inhibitor of growth and ethanol production by Zymomonas mobilis. This study used a naturally occurring (not GMO) biological pre-treatment to reduce that amount of furfural in a model fermentation broth. Pre-treatment involved inoculating and incubating the fermentation broth with strains of Leuconostoc mesenteroides or Leuconostoc pseudomesenteroides. The Leuconostoc strains converted furfural to furfuryl alcohol without consuming large amounts of dextrose in the process. Coupling this pre-treatment to ethanolic fermentation reduced furfural in the broth and improved growth, dextrose uptake and ethanol formation. Pre-treatment permitted ethanol formation in the presence of 5.2 g L(-1) furfural, which was otherwise inhibitive. The pre-treatment and presence of the Leuconostoc strains in the fermentation broth did not interfere with Z. mobilis ethanolic fermentation or the amounts of ethanol produced. The method suggests a possible technique for reducing the effect that furfural has on the production of ethanol for use as a biofuel. Published by Elsevier Ltd.

Effects of furan derivatives and phenolic compounds on electricity generation in microbial fuel cells

Energy Technology Data Exchange (ETDEWEB)

Catal, Tunc [Department of Biological and Ecological Engineering, Oregon State University, 116 Gilmore Hall, Corvallis, OR 97331 (United States); Department of Wood Science and Engineering, Oregon State University, 102 97331, Corvallis, OR (United States); Department of Molecular Biology and Genetics, Istanbul Technical University, 34469-Maslak, Istanbul (Turkey); Fan, Yanzhen; Liu, Hong [Department of Biological and Ecological Engineering, Oregon State University, 116 Gilmore Hall, Corvallis, OR 97331 (United States); Li, Kaichang [Department of Wood Science and Engineering, Oregon State University, 102 97331, Corvallis, OR (United States); Bermek, Hakan [Department of Molecular Biology and Genetics, Istanbul Technical University, 34469-Maslak, Istanbul (Turkey)

2008-05-15

Lignocellulosic biomass is an attractive fuel source for MFCs due to its renewable nature and ready availability. Furan derivatives and phenolic compounds could be potentially formed during the pre-treatment process of lignocellulosic biomass. In this study, voltage generation from these compounds and the effects of these compounds on voltage generation from glucose in air-cathode microbial fuel cells (MFCs) were examined. Except for 5-hydroxymethyl furfural (5-HMF), all the other compounds tested were unable to be utilized directly for electricity production in MFCs in the absence of other electron donors. One furan derivate, 5-HMF and two phenolic compounds, trans-cinnamic acid and 3,5-dimethoxy-4-hydroxy-cinnamic acid did not affect electricity generation from glucose at a concentration up to 10 mM. Four phenolic compounds, including syringaldeyhde, vanillin, trans-4-hydroxy-3-methoxy, and 4-hydroxy cinnamic acids inhibited electricity generation at concentrations above 5 mM. Other compounds, including 2-furaldehyde, benzyl alcohol and acetophenone, inhibited the electricity generation even at concentrations less than 0.2 mM. This study suggests that effective electricity generation from the hydrolysates of lignocellulosic biomass in MFCs may require the employment of the hydrolysis methods with low furan derivatives and phenolic compounds production, or the removal of some strong inhibitors prior to the MFC operation, or the improvement of bacterial tolerance against these compounds through the enrichment of new bacterial cultures or genetic modification of the bacterial strains. (author)

Effects of furan derivatives and phenolic compounds on electricity generation in microbial fuel cells

Science.gov (United States)

Catal, Tunc; Fan, Yanzhen; Li, Kaichang; Bermek, Hakan; Liu, Hong

Lignocellulosic biomass is an attractive fuel source for MFCs due to its renewable nature and ready availability. Furan derivatives and phenolic compounds could be potentially formed during the pre-treatment process of lignocellulosic biomass. In this study, voltage generation from these compounds and the effects of these compounds on voltage generation from glucose in air-cathode microbial fuel cells (MFCs) were examined. Except for 5-hydroxymethyl furfural (5-HMF), all the other compounds tested were unable to be utilized directly for electricity production in MFCs in the absence of other electron donors. One furan derivate, 5-HMF and two phenolic compounds, trans-cinnamic acid and 3,5-dimethoxy-4-hydroxy-cinnamic acid did not affect electricity generation from glucose at a concentration up to 10 mM. Four phenolic compounds, including syringaldeyhde, vanillin, trans-4-hydroxy-3-methoxy, and 4-hydroxy cinnamic acids inhibited electricity generation at concentrations above 5 mM. Other compounds, including 2-furaldehyde, benzyl alcohol and acetophenone, inhibited the electricity generation even at concentrations less than 0.2 mM. This study suggests that effective electricity generation from the hydrolysates of lignocellulosic biomass in MFCs may require the employment of the hydrolysis methods with low furan derivatives and phenolic compounds production, or the removal of some strong inhibitors prior to the MFC operation, or the improvement of bacterial tolerance against these compounds through the enrichment of new bacterial cultures or genetic modification of the bacterial strains.

Biochemical characterization of ethanol-dependent reduction of furfural by alcohol dehydrogenases.

Science.gov (United States)

Li, Qunrui; Metthew Lam, L K; Xun, Luying

2011-11-01

Lignocellulosic biomass is usually converted to hydrolysates, which consist of sugars and sugar derivatives, such as furfural. Before yeast ferments sugars to ethanol, it reduces toxic furfural to non-inhibitory furfuryl alcohol in a prolonged lag phase. Bioreduction of furfural may shorten the lag phase. Cupriavidus necator JMP134 rapidly reduces furfural with a Zn-dependent alcohol dehydrogenase (FurX) at the expense of ethanol (Li et al. 2011). The mechanism of the ethanol-dependent reduction of furfural by FurX and three homologous alcohol dehydrogenases was investigated. The reduction consisted of two individual reactions: ethanol-dependent reduction of NAD(+) to NADH and then NADH-dependent reduction of furfural to furfuryl alcohol. The kinetic parameters of the coupled reaction and the individual reactions were determined for the four enzymes. The data indicated that limited NADH was released in the coupled reaction. The enzymes had high affinities for NADH (e.g., K ( d ) of 0.043 μM for the FurX-NADH complex) and relatively low affinities for NAD(+) (e.g., K ( d ) of 87 μM for FurX-NAD(+)). The kinetic data suggest that the four enzymes are efficient "furfural reductases" with either ethanol or NADH as the reducing power. The standard free energy change (ΔG°') for ethanol-dependent reduction of furfural was determined to be -1.1 kJ mol(-1). The physiological benefit for ethanol-dependent reduction of furfural is likely to replace toxic and recalcitrant furfural with less toxic and more biodegradable acetaldehyde.

Glucose and Fructose to Platform Chemicals: Understanding the Thermodynamic Landscapes of Acid-Catalysed Reactions Using High-Level ab Initio Methods

Energy Technology Data Exchange (ETDEWEB)

Assary, Rajeev S.; Kim, Taijin; Low, John; Greeley, Jeffrey P.; Curtiss, Larry A.

2012-12-28

Molecular level understanding of acid-catalysed conversion of sugar molecules to platform chemicals such as hydroxy-methyl furfural (HMF), furfuryl alcohol (FAL), and levulinic acid (LA) is essential for efficient biomass conversion. In this paper, the high-level G4MP2 method along with the SMD solvation model is employed to understand detailed reaction energetics of the acid-catalysed decomposition of glucose and fructose to HMF. Based on protonation free energies of various hydroxyl groups of the sugar molecule, the relative reactivity of gluco-pyranose, fructo-pyranose and fructo-furanose are predicted. Calculations suggest that, in addition to the protonated intermediates, a solvent assisted dehydration of one of the fructo-furanosyl intermediates is a competing mechanism, indicating the possibility of multiple reaction pathways for fructose to HMF conversion in aqueous acidic medium. Two reaction pathways were explored to understand the thermodynamics of glucose to HMF; the first one is initiated by the protonation of a C2–OH group and the second one through an enolate intermediate involving acyclic intermediates. Additionally, a pathway is proposed for the formation of furfuryl alcohol from glucose initiated by the protonation of a C2–OH position, which includes a C–C bond cleavage, and the formation of formic acid. The detailed free energy landscapes predicted in this study can be used as benchmarks for further exploring the sugar decomposition reactions, prediction of possible intermediates, and finally designing improved catalysts for biomass conversion chemistry in the future.

Atmospheric Oxidation Mechanism of Furfural Initiated by Hydroxyl Radicals.

Science.gov (United States)

Zhao, Xiaocan; Wang, Liming

2017-05-04

Furfural is emitted into the atmosphere because of its potential applications as an intermediate to alkane fuels from biomass, industrial usages, and biomass burning. The kinetic and mechanistic information on the furfural chemistry is necessary to assess the fate of furfural in the atmosphere and its impact on the air quality. Here we studied the atmospheric oxidation mechanisms of furfural initiated by the OH radicals using quantum chemistry and kinetic calculations. The reaction of OH and furfural was initiated mainly by OH additions to C 2 and C 5 positions, forming R2 and R5 adducts, which could undergo rapid ring-breakage to form R2B and R5B, respectively. Our calculations showed that these intermediate radicals reacted rather slowly with O 2 under the atmospheric conditions because the additions of O 2 to these radicals are only slightly exothermic and highly reversible. Alternatively, these radicals would react directly with O 3 , NO 2 , HO 2 /RO 2 , etc. Namely, the atmospheric oxidation of furfural would unlikely result in ozone formation. Under typical atmospheric conditions, the main products in OH-initiated furfural oxidation include 2-oxo-3-pentene-1,5-dialdehyde, 5-hydroxy-2(5H)-furanone, 4-oxo-2- butenoic acid, and 2,5-furandione. These compounds will likely stay in the gas phase and are subject to further photo-oxidation.

PENGARUH JENIS DAN KONSENTRASI KATALISATOR ASAM TERHADAP SINTESIS FURFURAL DARI SEKAM PADI

Directory of Open Access Journals (Sweden)

Rinna Juwita

2012-10-01

Full Text Available Indonesia is an agrarian country with a large rice production, where rice production is often high, the potential of rice waste will be higher, one of the waste is rice hull that can be used as raw material for the manufacture of furfural. This research aims to determine the type and concentration of acid catalyst in the manufacture of furfural, and analyze the effect of acid catalyst type and concentration to furfural obtained. This research was done by three stages, namely preparation of raw materials, hydrolysis and distillation process. Preparation of raw materials was started by reducing the rice hull’s size up to 80 mesh and then drying. Acid catalyst hydrolysis carried out for four hours with the operating temperature of 85 oC, then filtered hydrolyzate was purified by distillation. Research was done by varying the acid catalyst in the form of sulfuric acid and hidrochloric acid with the concentration of 1%, 3%, 5%, 7% and 9%. The results showed that the synthesis of furfural from rice hull obtained the highest furfural concentration on the sulfuric acidcatalyst at 1% concentration. The furfural obtained with concentration of 1%, 3%, 5%, 7% and 9% on a sulfuric acidcatalyst respectively at 1.815%; 1.256%; 0.933%; 0.733% and 0.730%, while the furfural obtained on the hydrochloric acid catalyst respectively at 1.659%; 1.126%; 0.848%; 0.737% and 0.726%.

Physicochemical properties of some honeys produced from different plants in Morocco

Directory of Open Access Journals (Sweden)

Amina Chakir

2016-11-01

As a consequence, we present data on water content, electrical conductivity, pH, free acidity, lactone acidity, total acidity, diastase, 5-(hydroxymethyl-2-furaldehyde (HMF amounts, fructose, glucose and sucrose.

hmF2 variability over Havana

International Nuclear Information System (INIS)

Lazo, B.; Alazo, K.; Rodriguez, M.; Calzadilla, A.

2003-01-01

The hmF2 variability over Havana station (Geo. Latitude 23 deg. N, Geo Longitude 278 deg. E; Dip 54.6 deg. N; Modip: 44.8 deg. N) is presented. In this study different solar and seasonal conditions are considered. The results show that, in general, standard deviation of hmF2 is quite irregular and reaches its values at nighttimes hours. Lower and upper quartiles variability has a similar behaviour to IQ variability, showing its higher values at nighttimes too. (author)

Growth of a Strictly Anaerobic Bacterium on Furfural (2-Furaldehyde)

Science.gov (United States)

Brune, Gerhard; Schoberth, Siegfried M.; Sahm, Hermann

1983-01-01

A strictly anaerobic bacterium was isolated from a continuous fermentor culture which converted the organic constituents of sulfite evaporator condensate to methane and carbon dioxide. Furfural is one of the major components of this condensate. This furfural isolate could degrade furfural as the sole source of carbon and energy in a defined mineral-vitamin-sulfate medium. Acetic acid was the major fermentation product. This organism could also use ethanol, lactate, pyruvate, or fumarate and contained cytochrome c3 and desulfoviridin. Except for furfural degradation, the characteristics of the furfural isolate were remarkably similar to those of the sulfate reducer Desulfovibrio gigas. The furfural isolate has been tentatively identified as Desulfovibrio sp. strain F-1. Images PMID:16346423

Hydrogen production profiles using furans in microbial electrolysis cells.

Science.gov (United States)

Catal, Tunc; Gover, Tansu; Yaman, Bugra; Droguetti, Jessica; Yilancioglu, Kaan

2017-06-01

Microbial electrochemical cells including microbial fuel cells (MFCs) and microbial electrolysis cells (MECs) are novel biotechnological tools that can convert organic substances in wastewater or biomass into electricity or hydrogen. Electroactive microbial biofilms used in this technology have ability to transfer electrons from organic compounds to anodes. Evaluation of biofilm formation on anode is crucial for enhancing our understanding of hydrogen generation in terms of substrate utilization by microorganisms. In this study, furfural and hydroxymethylfurfural (HMF) were analyzed for hydrogen generation using single chamber membrane-free MECs (17 mL), and anode biofilms were also examined. MECs were inoculated with mixed bacterial culture enriched using chloroethane sulphonate. Hydrogen was succesfully produced in the presence of HMF, but not furfural. MECs generated similar current densities (5.9 and 6 mA/cm 2 furfural and HMF, respectively). Biofilm samples obtained on the 24th and 40th day of cultivation using aromatic compounds were evaluated by using epi-fluorescent microscope. Our results show a correlation between biofilm density and hydrogen generation in single chamber MECs.

Desorption of Furfural from Bimetallic Pt-Fe Oxides/Alumina Catalysts

Directory of Open Access Journals (Sweden)

Gloria Lourdes Dimas-Rivera

2014-01-01

Full Text Available In this work, the desorption of furfural, which is a competitive intermediate during the production of biofuel and valuable aromatic compounds, was studied using pure alumina, as well as alumina impregnated with iron and platinum oxides both individually and in combination, using thermogravimetric analysis (TGA. The bimetallic sample exhibited the lowest desorption percentage for furfural. High-resolution transmission electron microscopy (HRTEM imaging revealed the intimate connection between the iron and platinum oxide species on the alumina support. The mechanism of furfural desorption from the Pt-Fe/Al2O3 0.5%-0.5% sample was determined using physisorbed furfural instead of chemisorbed furfural; this mechanism involved the oxidation of the C=O group on furfural by the catalyst. The oxide nanoparticles on γ-Al2O3 support helped to stabilize the furfural molecule on the surface.

Furfural stability in various conditions

OpenAIRE

Oreiro Muzas, Olaya

2011-01-01

The topic of this thesis is the study of the furfural stability to determine the influence of some conditions in furfural degradation. The aim of the study is to decrease furfural degradation and thus improve furfural yield in furfural production. The thesis consists of a literature review and laboratory experiments. Attention has been paid to the furfural description and properties as well as the background of the research and traditional methods to produce furfural. In the experiments, w...

Intracellular metabolite profiling of Saccharomyces cerevisiae evolved under furfural.

Science.gov (United States)

Jung, Young Hoon; Kim, Sooah; Yang, Jungwoo; Seo, Jin-Ho; Kim, Kyoung Heon

2017-03-01

Furfural, one of the most common inhibitors in pre-treatment hydrolysates, reduces the cell growth and ethanol production of yeast. Evolutionary engineering has been used as a selection scheme to obtain yeast strains that exhibit furfural tolerance. However, the response of Saccharomyces cerevisiae to furfural at the metabolite level during evolution remains unknown. In this study, evolutionary engineering and metabolomic analyses were applied to determine the effects of furfural on yeasts and their metabolic response to continuous exposure to furfural. After 50 serial transfers of cultures in the presence of furfural, the evolved strains acquired the ability to stably manage its physiological status under the furfural stress. A total of 98 metabolites were identified, and their abundance profiles implied that yeast metabolism was globally regulated. Under the furfural stress, stress-protective molecules and cofactor-related mechanisms were mainly induced in the parental strain. However, during evolution under the furfural stress, S. cerevisiae underwent global metabolic allocations to quickly overcome the stress, particularly by maintaining higher levels of metabolites related to energy generation, cofactor regeneration and recovery from cellular damage. Mapping the mechanisms of furfural tolerance conferred by evolutionary engineering in the present study will be led to rational design of metabolically engineered yeasts. © 2016 The Authors. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

Methanogenic Transformation of Methylfurfural Compounds to Furfural

OpenAIRE

Boopathy, R.

1996-01-01

The metabolic conversion of 5-methylfurfural and 2-methylfurfural to furfural by a methanogenic bacterium, Methanococcus sp. strain B, was studied. This bacterium was found to use methylfurfural compounds as a growth substrate and to convert them stoichiometrically to furfural. For every mole of methylfurfurals metabolized, almost 1 mol of furfural and 0.7 mol of methane were produced. Several methanogenic bacteria did not carry out this conversion. The metabolic conversion of methylfurfurals...

Stereochemistry of Furfural Reduction by a Saccharomyces cerevisiae Aldehyde Reductase That Contributes to In Situ Furfural Detoxification▿

Science.gov (United States)

Bowman, Michael J.; Jordan, Douglas B.; Vermillion, Karl E.; Braker, Jay D.; Moon, Jaewoong; Liu, Z. Lewis

2010-01-01

Ari1p from Saccharomyces cerevisiae, recently identified as an intermediate-subclass short-chain dehydrogenase/reductase, contributes in situ to the detoxification of furfural. Furfural inhibits efficient ethanol production by yeast, particularly when the carbon source is acid-treated lignocellulose, which contains furfural at a relatively high concentration. NADPH is Ari1p's best known hydride donor. Here we report the stereochemistry of the hydride transfer step, determined by using (4R)-[4-2H]NADPD and (4S)-[4-2H]NADPD and unlabeled furfural in Ari1p-catalyzed reactions and following the deuterium atom into products 2-furanmethanol or NADP+. Analysis of the products demonstrates unambiguously that Ari1p directs hydride transfer from the si face of NADPH to the re face of furfural. The singular orientation of substrates enables construction of a model of the Michaelis complex in the Ari1p active site. The model reveals hydrophobic residues near the furfural binding site that, upon mutation, may increase specificity for furfural and enhance enzyme performance. Using (4S)-[4-2H]NADPD and NADPH as substrates, primary deuterium kinetic isotope effects of 2.2 and 2.5 were determined for the steady-state parameters kcatNADPH and kcat/KmNADPH, respectively, indicating that hydride transfer is partially rate limiting to catalysis. PMID:20525870

Optimization of furfural production from D-xylose with formic acid as catalyst in a reactive extraction system.

Science.gov (United States)

Yang, Wandian; Li, Pingli; Bo, Dechen; Chang, Heying; Wang, Xiaowei; Zhu, Tao

2013-04-01

Furfural is one of the most promising platform chemicals derived from biomass. In this study, response surface methodology (RSM) was utilized to determine four important parameters including reaction temperature (170-210°C), formic acid concentration (5-25 g/L), o-nitrotoluene volume percentage (20-80 vt.%), and residence time (40-200 min). The maximum furfural yield of 74% and selectivity of 86% were achieved at 190°C for 20 g/L formic acid concentration and 75 vt.% o-nitrotoluene by 75 min. The high boiling solvent, o-nitrotoluene, was recommended as extraction solvent in a reactive extraction system to obtain high furfural yield and reduce furfural-solvent separation costs. Although the addition of halides to the xylose solutions enhanced the furfural yield and selectivity, the concentration of halides was not an important factor on the furfural yield and selectivity. Copyright © 2013 Elsevier Ltd. All rights reserved.

Effect of acetyl groups of wood on furfural preparation

Energy Technology Data Exchange (ETDEWEB)

Skvortsov, S.V.; Kolchina, N.P.; Miroshnichenko, V.G.

1981-01-01

The deacetylation (4% Na/sub 2/CO/sub 3/, 60 degrees) of birch sawdust prior to hydrolysis decreased the yield of furfural, presumably due to thermal degradation of pentosans and buildup of HCOOH in the wood stock. Thus, while untreated birch sawdust gave 6.6% furfural, the acetylated sawdust gave only 4.5% furfural.

Effect of surfactants on separate hydrolysis fermentation and simultaneous saccharification fermentation of pretreated lodgepole pine.

Science.gov (United States)

Tu, Maobing; Zhang, Xiao; Paice, Mike; McFarlane, Paul; Saddler, Jack N

2009-01-01

The effects of surfactants addition on enzymatic hydrolysis and subsequent fermentation of steam exploded lodgepole pine (SELP) and ethanol pretreated lodgepole pine (EPLP) were investigated in this study. Supplementing Tween 80 during cellulase hydrolysis of SELP resulted in a 32% increase in the cellulose-to-glucose yield. However, little improvement was obtained from hydrolyzing EPLP in the presence of the same amount of surfactant. The positive effect of surfactants on SELP hydrolysis led to an increase in final ethanol yield after the fermentation. It was found that the addition of surfactant led to a substantial increase in the amount of free enzymes in the 48 h hydrolysates derived from both substrates. The effect of surfactant addition on final ethanol yield of simultaneous saccharification and fermentation (SSF) was also investigated by using SELP in the presence of additional furfural and hydroxymethylfurfural (HMF). The results showed that the surfactants slightly increased the conversion rates of furfural and HMF during SSF process by Saccharomyces cerevisiae. The presence of furfural and HMF at the experimental concentrations did not affect the final ethanol concentration either. The strategy of applying surfactants in cellulase recycling to reduce enzyme cost is presented. (c) 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009.

Anaerobic Transformation of Furfural by Methanococcus deltae (Delta)LH

Science.gov (United States)

Belay, N.; Boopathy, R.; Voskuilen, G.

1997-01-01

Methanococcus deltae (Delta)LH was grown on H(inf2)-CO(inf2) in the presence of various concentrations of furfural. Furfural at higher concentrations, namely, 20 and 25 mM, inhibited growth of this organism. At concentration of 5 and 10 mM, no inhibition of growth was observed. The other methanogens in this study were not inhibited by 10 mM furfural. Among the methanogens tested, M. deltae was capable of transforming furfural, whereas Methanobacterium thermoautotrophicum Marburg, Methanosarcina barkeri 227, Methanococcus thermolithotrophicus, and Methanobrevibacter ruminantium lacked this capability. One hundred percent removal of furfural was observed within 48 h of incubation in M. deltae cultures. The end product observed during furfural metabolism was furfuryl alcohol. An almost stoichiometric amount of furfuryl alcohol was produced by M. deltae. This transformation is likely to be of value in the detoxification of furfural and in its ultimate conversion to methane and CO(inf2) by anaerobic digestion. PMID:16535618

Furfural and other furane-derivates as diesel fuel additives. Furfural und andere Furanderivate als Zusatz zum Dieselkraftstoff

Energy Technology Data Exchange (ETDEWEB)

Nemling, O.

1982-01-01

Alternative energies such as fuel additives or fuel-substitutes are on their way upwards as they may help to reduce the dependency on crude and crude-based fuels. A number of solutions has already been indicated for carburettor engines whereas a lot more of research and development is needed to find a safe alternative to diesel fuels. Possibilities of using furfural, furfuralcohol and furan-2-carbonic acid-methylester as additives to diesel or as a substitute were investigated. A survey on the characteristic properties of these substances is given, then several tests are set up in order to describe the properties of diesel additive mixtures at low temperatures. Based on these tests two mixtures are proposed both with a furfural/butanole mixture. Furfural is suitable as diesel additive, a solubilizer is needed though.

Over-expression of a putative oxidoreductase (UcpA) for increasing furfural or 5-hydroxymethylfurfural tolerance

Science.gov (United States)

Wang, Xuan; Miller, Elliot N.; Yomano, Lorraine P.; Shanmugam, Keelnatham T.; Ingram, Lonnie O'Neal

2016-05-24

The subject invention pertains to overexpression of a putative oxidoreductase (ucpA) for increasing furfural tolerance in genetically modified microorganisms. Genetically modified microorganisms capable of overexpressing UcpA are also provided. Increased expression of ucpA was shown to increase furfural tolerance by 50%, and to permit the fermentation of sugars to products in the presence of 15 mM furfural.

Continuous enzymatic hydrolysis of lignocellulosic biomass with simultaneous detoxification and enzyme recovery.

Science.gov (United States)

Gurram, Raghu N; Menkhaus, Todd J

2014-07-01

Recovering hydrolysis enzymes and/or alternative enzyme addition strategies are two potential mechanisms for reducing the cost during the biochemical conversion of lignocellulosic materials into renewable biofuels and biochemicals. Here, we show that enzymatic hydrolysis of acid-pretreated pine wood with continuous and/or fed-batch enzyme addition improved sugar conversion efficiencies by over sixfold. In addition, specific activity of the hydrolysis enzymes (cellulases, hemicellulases, etc.) increased as a result of continuously washing the residual solids with removal of glucose (avoiding the end product inhibition) and other enzymatic inhibitory compounds (e.g., furfural, hydroxymethyl furfural, organic acids, and phenolics). As part of the continuous hydrolysis, anion exchange resin was tested for its dual application of simultaneous enzyme recovery and removal of potential enzymatic and fermentation inhibitors. Amberlite IRA-96 showed favorable adsorption profiles of inhibitors, especially furfural, hydroxymethyl furfural, and acetic acid with low affinity toward sugars. Affinity of hydrolysis enzymes to adsorb onto the resin allowed for up to 92 % of the enzymatic activity to be recovered using a relatively low-molar NaCl wash solution. Integration of an ion exchange column with enzyme recovery into the proposed fed-batch hydrolysis process can improve the overall biorefinery efficiency and can greatly reduce the production costs of lignocellulosic biorenewable products.

Processing of nonedible plant wastes to obtain furfural and yeasts

Energy Technology Data Exchange (ETDEWEB)

Golowin, W.W.

1977-01-01

The technology of furfural and yeast production from hydrolyzates of wastes from the food and wood-processing industries is detailed. For furfural manufacturing, the pentosan-containing raw material is treated with H/sub 2/SO/sub 4/ and steam-hydrolyzed, the furfural-containing vapors are condensed and separated from non-condensing gases, and the furfural is isolated from the condensate, purified and stabilized. After the furfural hydrolysis, the pressure is decreased from 3 to 1.2 atm, a 0.5% H/sub 2/SO/sub 4/ solution is added, and a hexose-containing hydrolyzate is transferred for neutralization and yeast culturing.

Affinity of hydroxyapatite for furfural and a brown pigment formed by furfural and glycine.

Science.gov (United States)

Nordbö, H; Eriksen, H M; Rölla, G

1979-10-01

The affinity of hydroxyapatite for furfural and a brown pigment formed by furfural and glycine was studied. A series of mixtures containing 1 M furfural and 0.25-2.0 M glycine were incubated at 37 degrees C and aliquots of hydroxyapatite added. The apatite showed a strong affinity for the brown pigment formed, and an excess of glycine in the mixtures appeared to enhance the binding. The adsorption of furfural to hydroxyapatite was estimated by a spectrophotometric method. The data revealed that pretreatment with CaCl2 and glycine significantly increased the adsorption of furfural.

Synthesis of the insecticide prothrin and its analogues from biomass-derived 5-(Chloromethyl) furfural

Science.gov (United States)

Prothrin, a synthetic pyrethroid insecticide, was synthesized from the biomass-derived platform chemical 5 (chloromethyl)furfural in six steps and overall 65% yield. Two structural analogues of prothrin were also prepared following the same synthetic approach. Preliminary testing of these furan-base...

Physico-chemical studies on adulteration of honey in Nigeria.

Science.gov (United States)

Lawal, R A; Lawal, A K; Adekalu, J B

2009-08-01

The extent of adulteration of honey samples from various geographical locations in Nigeria was evaluated. In order to ascertain the quality and extent of adulteration of the honey samples, the total titrable acidity, brix content, pH, colour, viscosity, moisture content, total solids, ash content, hydroxymethyl furfural and microbiological analysis were carried out. Honey samples from Akwa-Ibom, Ondo and Ogun had a high hydroxymethyl furfural with coliforms and total bacteria counts being absent, while honey samples from Shaki, Yola and Ibadan had a low hydroxymethyl furfural and some total viable counts were present in them. These results indicate that honey samples from Akwa-Ibom, Ondo and Ogun were completely free of adulteration. However, honey samples obtained from Shaki, Yola and Ibadan were discovered to have undergone some form of adulteration.

Genome-wide mapping of furfural tolerance genes in Escherichia coli.

Science.gov (United States)

Glebes, Tirzah Y; Sandoval, Nicholas R; Reeder, Philippa J; Schilling, Katherine D; Zhang, Min; Gill, Ryan T

2014-01-01

Advances in genomics have improved the ability to map complex genotype-to-phenotype relationships, like those required for engineering chemical tolerance. Here, we have applied the multiSCale Analysis of Library Enrichments (SCALEs; Lynch et al. (2007) Nat. Method.) approach to map, in parallel, the effect of increased dosage for >10(5) different fragments of the Escherichia coli genome onto furfural tolerance (furfural is a key toxin of lignocellulosic hydrolysate). Only 268 of >4,000 E. coli genes (∼ 6%) were enriched after growth selections in the presence of furfural. Several of the enriched genes were cloned and tested individually for their effect on furfural tolerance. Overexpression of thyA, lpcA, or groESL individually increased growth in the presence of furfural. Overexpression of lpcA, but not groESL or thyA, resulted in increased furfural reduction rate, a previously identified mechanism underlying furfural tolerance. We additionally show that plasmid-based expression of functional LpcA or GroESL is required to confer furfural tolerance. This study identifies new furfural tolerant genes, which can be applied in future strain design efforts focused on the production of fuels and chemicals from lignocellulosic hydrolysate.

Genome-wide mapping of furfural tolerance genes in Escherichia coli.

Directory of Open Access Journals (Sweden)

Tirzah Y Glebes

Full Text Available Advances in genomics have improved the ability to map complex genotype-to-phenotype relationships, like those required for engineering chemical tolerance. Here, we have applied the multiSCale Analysis of Library Enrichments (SCALEs; Lynch et al. (2007 Nat. Method. approach to map, in parallel, the effect of increased dosage for >10(5 different fragments of the Escherichia coli genome onto furfural tolerance (furfural is a key toxin of lignocellulosic hydrolysate. Only 268 of >4,000 E. coli genes (∼ 6% were enriched after growth selections in the presence of furfural. Several of the enriched genes were cloned and tested individually for their effect on furfural tolerance. Overexpression of thyA, lpcA, or groESL individually increased growth in the presence of furfural. Overexpression of lpcA, but not groESL or thyA, resulted in increased furfural reduction rate, a previously identified mechanism underlying furfural tolerance. We additionally show that plasmid-based expression of functional LpcA or GroESL is required to confer furfural tolerance. This study identifies new furfural tolerant genes, which can be applied in future strain design efforts focused on the production of fuels and chemicals from lignocellulosic hydrolysate.

Kinetics of heat-induced color change of a tuna-vegetable mixture

OpenAIRE

Scherer, Erika; Sandoval, Aleida J; Barreiro, José A

2009-01-01

Heat induced color change kinetics in a tuna-vegetable mixture was evaluated by measuring color parameter "L" (Hunter-Lab) and 5-hydroxi-methyl-furfural (5-HMF) accumulation. For this purpose small reusable stainless steel TDT cans were used and the kinetic studies performed in a temperature range characteristic of thermal processing of low acid canned foods (110-125°C). The color parameter L was better described by a pseudo zero order while a pseudo first order reaction was found for 5-HMF a...

Microbial degradation of furanic compounds : Biochemistry, genetics, and impact

NARCIS (Netherlands)

Wierckx, N.; Koopman, F.; Ruijssenaars, H.J.; De Winde, J.H.

2011-01-01

Microbial metabolism of furanic compounds, especially furfural and 5-hydroxymethylfurfural (HMF), is rapidly gaining interest in the scientific community. This interest can largely be attributed to the occurrence of toxic furanic aldehydes in lignocellulosic hydrolysates. However, these compounds

Enhanced stabilization of collagen by furfural.

Science.gov (United States)

Lakra, Rachita; Kiran, Manikantan Syamala; Usha, Ramamoorthy; Mohan, Ranganathan; Sundaresan, Raja; Korrapati, Purna Sai

2014-04-01

Furfural (2-furancarboxaldehyde), a product derived from plant pentosans, has been investigated for its interaction with collagen. Introduction of furfural during fibril formation enhanced the thermal and mechanical stability of collagen. Collagen films treated with furfural exhibited higher denaturation temperature (Td) (pFurfural and furfural treated collagen films did not have any cytotoxic effect. Rheological characterization showed an increase in shear stress and shear viscosity with increasing shear rate for treated collagen. Circular dichroism (CD) studies indicated that the furfural did not have any impact on triple helical structure of collagen. Scanning electron microscopy (SEM) of furfural treated collagen exhibited small sized porous structure in comparison with untreated collagen. Thus this study provides an alternate ecologically safe crosslinking agent for improving the stability of collagen for biomedical and industrial applications. Copyright © 2014 Elsevier B.V. All rights reserved.

Impact of Furfural on Rapid Ethanol Production Using a Membrane Bioreactor

Directory of Open Access Journals (Sweden)

Mohammad J. Taherzadeh

2013-03-01

Full Text Available A membrane bioreactor was developed to counteract the inhibition effect of furfural in ethanol production. Furfural, a major inhibitor in lignocellulosic hydrolyzates, is a highly toxic substance which is formed from pentose sugars released during the acidic degradation of lignocellulosic materials. Continuous cultivations with complete cell retention were performed at a high dilution rate of 0.5 h−1. Furfural was added directly into the bioreactor by pulse injection or by addition into the feed medium to obtain furfural concentrations ranging from 0.1 to 21.8 g L−1. At all pulse injections of furfural, the yeast was able to convert the furfural very rapidly by in situ detoxification. When injecting 21.8 g L−1 furfural to the cultivation, the yeast converted it by a specific conversion rate of 0.35 g g−1 h−1. At high cell density, Saccharomyces cerevisiae could tolerate very high furfural levels without major changes in the ethanol production. During the continuous cultures when up to 17.0 g L−1 furfural was added to the inlet medium, the yeast successfully produced ethanol, whereas an increase of furfural to 18.6 and 20.6 g L−1 resulted in a rapidly decreasing ethanol production and accumulation of sugars in the permeate. This study show that continuous ethanol fermentations by total cell retention in a membrane bioreactor has a high furfural tolerance and can conduct rapid in situ detoxification of medium containing high furfural concentrations.

Synthesis and antiviral activity of 3'-deoxy-3'-C-hydroxymethyl nucleosides.

Science.gov (United States)

Bamford, M J; Coe, P L; Walker, R T

1990-09-01

A series of 3'-branched-chain sugar nucleosides, in particular 3'-deoxy-3'-C-hydroxmethyl nucleosides, have been synthesized and evaluated as antiviral agents. Reaction of 1-(2,3-epoxy-5-O-trityl-beta-D-lyxo-pentofuranosyl) derivatives 12 and 13, of uracil and thymine, respectively, with 5,6-dihydro-2-lithio-5-methyl-1,3,5-dithiazine 14 afforded the corresponding 3'-functionalized nucleosides 15 and 16, respectively. Replacement of the trityl group with tertbutyldiphenylsilyl allowed high yielding hydrolysis of the 3'-function to give the 3'-deoxy-3'-C-formyl-beta-D-arabino-pentofuranosyl nucleosides 21 and 22. Desilylation afforded the 1-(3-deoxy-3-C-formyl-beta- D-lyxo-pentofuranosyl) 3',5'-O-hemiacetal nucleosides 33 and 34, respectively. Reduction of the formyl group of 21 and 22, followed by desilylation, yielded the 3'-deoxy-3'-C-(hydroxymethyl)-beta-D-arabino- pentofuranosyl) analogues 7 and 8, respectively. The uracil base moiety of 7 was converted to 5-iodouracil and then to (E)-5-(2-bromovinyl)uracil to furnish an analogue 10 of BVaraU. The 1-(3-deoxy-3-C-(hydroxymethyl)-beta-D-lyxo-pentofuranosyl) and 1-(2,3-dideoxy-3-C-(hydroxymethyl)-beta-D-erythro-pentofuranosyl) derivatives of uracil (31 and 6, respectively) and 5-iodouracil (32 and 9, respectively) were also obtained. All novel, fully deprotected nucleoside analogues were evaluated for antiviral activity against human immunodeficiency virus type-1, herpes simplex virus types-1 and -2, varicella zoster virus, human cytomegalovirus and influenza A. Of the compounds tested only (E)-5-(2-bromovinyl)-1-[3-deoxy- 3-C-(hydroxymethyl)-beta-D-arabino-pentofuranosyl]uracil (10) inhibited VZV (alone), but did so at concentrations well below the cytotoxicity threshold.

Tandem mass spectrometric characterization of the conversion of xylose to furfural

International Nuclear Information System (INIS)

Vinueza, Nelson R.; Kim, Eurick S.; Gallardo, Vanessa A.; Mosier, Nathan S.; Abu-Omar, Mahdi M.; Carpita, Nicholas C.; Kenttämaa, Hilkka I.

2015-01-01

Thermal decomposition of xylose into furfural under acidic conditions has been studied using tandem mass spectrometry. Two different Brønsted acids, maleic and sulfuric acids, were used to demonstrate that varying the Brønsted acid does not affect the mechanism of the reaction. Two selectively labeled xylose molecules, 1- 13 C and 5- 13 C-xyloses, were examined to determine which carbon atom is converted to the aldehyde carbon in furfural. This can be done by using tandem mass spectrometry since collision-activated dissociation (CAD) of protonated unlabeled furfural results in the loss of CO from the aldehyde moiety. The loss of a neutral molecule with MW of 29 Da ( 13 CO) was observed for protonated furfural derived from 1- 13 C-labeled xylose while the loss of a neutral molecule with MW of 28 Da (CO) was observed for protonated furfural derived from 5- 13 C labeled xylose. These results support the hypothesis that the mechanism of formation of furfural under mildly hot acidic conditions involves an intramolecular rearrangement of protonated xylose into the pyranose form rather than into an open-chain form. - Highlights: • Mechanism of catalytic conversion of Xyl to furfural under acidic conditions was studied by MS/MS and partially labeled Xyl. • The type of acid does not have a strong influence on the mechanism of catalytic conversion of Xyl to furfural. • The mechanism of formation of furfural under mildly hot acidic conditions involves an intramolecular rearrangement of Xyl

Power generation from furfural using the microbial fuel cell

Energy Technology Data Exchange (ETDEWEB)

Luo, Yong; Liu, Guangli; Zhang, Renduo; Zhang, Cuiping [School of Environmental Science and Engineering, Sun Yat-sen University, Guangzhou, Guangdong 510275 (China)

2010-01-01

Furfural is a typical inhibitor in the ethanol fermentation process using lignocellulosic hydrolysates as raw materials. In the literature, no report has shown that furfural can be utilized as the fuel to produce electricity in the microbial fuel cell (MFC), a device that uses microbes to convert organic compounds to generate electricity. In this study, we demonstrated that electricity was successfully generated using furfural as the sole fuel in both the ferricyanide-cathode MFC and the air-cathode MFC. In the ferricyanide-cathode MFC, the maximum power densities reached 45.4, 81.4, and 103 W m{sup -3}, respectively, when 1000 mg L{sup -1} glucose, a mixture of 200 mg L{sup -1} glucose and 5 mM furfural, and 6.68 mM furfural were used as the fuels in the anode solution. The corresponding Coulombic efficiencies (CE) were 4.0, 7.1, and 10.2% for the three treatments, respectively. For pure furfural as the fuel, the removal efficiency of furfural reached up to 95% within 12 h. In the air-cathode MFC using 6.68 mM furfural as the fuel, the maximum values of power density and CE were 361 mW m{sup -2} (18 W m{sup -3}) and 30.3%, respectively, and the COD removal was about 68% at the end of the experiment (about 30 h). Increase in furfural concentrations from 6.68 to 20 mM resulted in increase in the maximum power densities from 361 to 368 mW m{sup -2}, and decrease in CEs from 30.3 to 20.6%. These results indicated that some toxic and biorefractory organics such as furfural might still be suitable resources for electricity generation using the MFC technology. (author)

Cyclic Acetalization of Furfural on Porous Aluminosilicate Acid Catalysts

Directory of Open Access Journals (Sweden)

Hartati Hartati

2016-12-01

Full Text Available Porous aluminosilicate materials included microporous and mesoporous ZSM-5, hierarchical aluminosilicates, and mesoporous aluminosilicate were tested for acetalization of furfural (furan-2-carbaldehyde with propylene glycol. The existing synthesis methods for aluminosilicate and ZSM-5 were modified to produce aluminosilicate material with hierarchical porous structure. Catalytic activity in acetalization of furfural by propylene glycol were conducted by refluxed of the mixture of furfural, propylene glycol and catalyst, using toluene as solvent and nitrobenzene as internal standard, at 106 °C for 4 h. The result showed that a combination of two structure directing agents, tetrapropylammonium hydroxide (TPAOH and cetyltrimethylammonium bromide (CTAB and modification of catalytic crystallization produced an active aluminosilicate framework that provides a wide access for a bulky reactants and strong acid sites to catalyze the reaction. The pore structure and the strength of the Brønsted acid sites were crucial for the high conversion of furfural to produce a cyclic acetal.

Binderless MDF from Hydroxymethylated Kenaf Pulp

OpenAIRE

Wistara, Nyoman J; Starini, Wulan; Febrianto, Fauzi; Pari, Gustan

2018-01-01

Modified lignin with improved reactivity can be a potential alternative for synthetic phenol formaldehyde resin for the adhesive of wood composite. Direct hydroxymethylation of kenaf in the present experiments was intended to increase lignin reactivity, and therefore was expected to result in satisfying properties of binderless MDF. The stem of kenaf was refined in a disk refiner and the refined fibers were hydroxymethylated in various levels of alkalinity. The concentration of NaOH during hy...

Hydrothermal liquefaction of cellulose to bio-oil under acidic, neutral and alkaline conditions

International Nuclear Information System (INIS)

Yin, Sudong; Tan, Zhongchao

2012-01-01

Highlights: ► Hydrothermal liquefaction (HTL) at acidic, neutral and alkaline conditions. ► Bio-oil compositions varied with acidic, neutral and alkaline conditions. ► Reaction mechanisms varied with acidic, neutral and alkaline conditions. ► HTL should be classified to acidic, neutral and alkaline processes. -- Abstract: Hydrothermal liquefaction (HTL) of biomass to bio-oil under alkaline or neutral conditions has been widely reported in literature. However, there has been limited data available in literature on comparing HTL of biomass to bio-oil under acidic, neutral, and alkaline in terms of chemical compositions and yields by using the same reaction conditions and reactor. Using cellulose as a feedstock we conducted the comparative studies for pH = 3, 7 and 14 at temperatures of 275–320 °C with reaction residence times of 0–30 min. Results showed that the chemical compositions of the bio-oils were different for acidic, neutral and alkaline conditions. Under acidic and neutral conditions, the main composition of HTL bio-oil was 5-(Hydroxymethyl)furfural (HMF). Under alkaline conditions, the main compounds became C 2–5 carboxylic acids. For bio-oil yields, it was observed that high temperatures and long residence times had negative effects, regardless of the pH levels. However, the corresponding reaction mechanisms are different. Under acidic conditions, the decrease in the bio-oil yields was mainly caused by polymerization of 5-HMF to solids. Under neutral conditions, the bio-oil yields decreased because 5-HMF was converted to both solid and gaseous products. Under alkaline conditions, the bio-oil decomposed to gases through the formation of short chain acids and aldehydes. Therefore, although they were all referred to as HTL bio-oil in literature, they were formed by different reaction pathways and had different properties due to their different chemical compositions. Given these differences, different strategies are recommended in this study to

Liquefaction of humins from C6-sugar conversions using heterogeneous catalysts

NARCIS (Netherlands)

Wang, Yuehu

2017-01-01

Biomass is considered an important resource for the production of carbon based chemicals to be used for important daily life products (plastics, paints, etc.). Platform chemicals such as furfural, 5-hydroxymethylfurfural (HMF) and levulinic acid (LA) have been identified as interesting biomass

Value addition to lignocellulosics and biomass-derived sugars

Indian Academy of Sciences (India)

For the synthesis of important platform chemicals such as sugars (xylose and arabinose) and furans (furfural and 5-hydroxymethylfurfural (HMF)) from carbohydrates (hemicellulose and fructose) solid acid catalysts are employed. Similarly, over solid acid catalysts, conversion of lignin into aromatic monomers is performed.

Chemical utilization of coppice: III - furfural

Energy Technology Data Exchange (ETDEWEB)

Vidrich, V.; Cecconi, C.A.; Fusi, P.

1980-01-01

The numerous applications of furfural in industry are briefly summarized and the mean contents of furfural and of methyl furfural in some Italian coppice species and species of the Mediterranean maquis capable of exploitation for this purpose are reported. (Refs. 14).

Transcriptome profiling of Zymomonas mobilis under furfural stress.

Science.gov (United States)

He, Ming-xiong; Wu, Bo; Shui, Zong-xia; Hu, Qi-chun; Wang, Wen-guo; Tan, Fu-rong; Tang, Xiao-yu; Zhu, Qi-li; Pan, Ke; Li, Qing; Su, Xiao-hong

2012-07-01

Furfural from lignocellulosic hydrolysates is the prevalent inhibitor to microorganisms during cellulosic ethanol production, but the molecular mechanisms of tolerance to this inhibitor in Zymomonas mobilis are still unclear. In this study, genome-wide transcriptional responses to furfural were investigated in Z. mobilis using microarray analysis. We found that 433 genes were differentially expressed in response to furfural. Furfural up- or down-regulated genes related to cell wall/membrane biogenesis, metabolism, and transcription. However, furfural has a subtle negative effect on Entner-Doudoroff pathway mRNAs. Our results revealed that furfural had effects on multiple aspects of cellular metabolism at the transcriptional level and that membrane might play important roles in response to furfural. This research has provided insights into the molecular response to furfural in Z. mobilis, and it will be helpful to construct more furfural-resistant strains for cellulosic ethanol production.

The catalytic effect of honey on formation of reducing sugars during sucrose hydrolysis

Directory of Open Access Journals (Sweden)

Radovanović Mirjana N.

2017-01-01

Full Text Available In commercial apiculture, beekepers usually remove honey from hives and replenish food reserves with sugar syrup. When honeybees use sugar syrup (sucrose solution, they break down sucrose into glucose and fructose. These processes exhaust and weaken bees. In order to prevent bee exhaustion resulting from this processing, bees should preferably be supplied with ready made food before winter, i.e., with syrup in which sucrose has already been inverted. Feeding with inverted syrups is the most popular way of honeybee feeding. Beekeepers usually prepare inverted syrups by adding a weak organic acid (citric, oxalic, acetic or lactic acid to sucrose solution at elevated temperatures. Inverted syrup production under uncontrolled pH, temperature and time conditions can cause the formation of 5-hydroxymethyl-2-furaldehyde (HMF, a compound harmful to bees. High quality inverted syrup can be obtained through the hydrolytic decomposition of sucrose by the enzyme invertase. Due to its invertase content, honey can be used as a biocatalyst for sucrose inversion. Invertase activity depends on the type, method and time of honey storage. This study evaluates the catalytic effect of acacia honey on formation of reducing sugars during hydrolysis of 50 wt.% sucrose solution. The ratio of reducing sugars and sucrose at 40°C, after 5 days of hydrolysis at a concentration of honey and 10 wt.% was 0.30 g reducing sugars/g of sucrose. The highest content of reducing sugars was achieved at a temperature of 35°C, after 48 h of invertion. In all samples of hydrolysates obtained at different temperatures (35–65°C, HMF was detected at concentrations of less than 4.32 mg kg–1. A high degree of negative correlation (coefficient of linearity –0.94 was established between parameters of volumetric and polarimetric measurements during the hydrolysis of sucrose. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. III 46010

Phosphorylated mesoporous carbon as effective catalyst for the selective fructose dehydration to HMF

Energy Technology Data Exchange (ETDEWEB)

Villa, Alberto [Universita di Milano, Italy; Schiavoni, Marco [University of Milan and INFN, Milano, Italy; Fulvio, Pasquale F [ORNL; Mahurin, Shannon Mark [ORNL; Dai, Sheng [ORNL; Mayes, Richard T [ORNL; Veith, Gabriel M [ORNL; Prati, Laura [Universita di Milano, Italy

2013-01-01

Phosphorylated mesoporous carbons (PMCs) have been synthesized using an already reported one pot methodology. These materials have been applied as acidic catalysts in the dehydration of fructose to hydroxymethylfurfural (HMF). PMCs showed better selectivity to HMF compared to sulfonated carbon catalyst (SC) despite lower activity. The concentration of P-O groups correlates to the activity/selectivity of the catalysts; the higher the P-O concentration the higher the activity. However, the higher the P-O content the lower the selectivity to HMF. Indeed a lower concentration of the P-O groups (and even the acidic groups) minimized the degradation of HMF to levulinic acid and the formation of by-products, such as humines. Stability tests showed that these systems deactivate due to the formation of humines, water insoluble by-products derived from the dehydration of fructose, blocking the active site of the catalyst. Increasing the amount of P-O groups, higher amount of humines are formed; therefore carbons containing lower amount of phosphorylated groups, such as P/N-0.25, are less prone to deactivation. Keywords: Phosphorylated mesoporous carbons; fructose dehydration; HMF

Furfural tolerance and detoxification mechanism in Candida tropicalis.

Science.gov (United States)

Wang, Shizeng; Cheng, Gang; Joshua, Chijioke; He, Zijun; Sun, Xinxiao; Li, Ruimin; Liu, Lexuan; Yuan, Qipeng

2016-01-01

Current biomass pretreatment by hydrothermal treatment (including acid hydrolysis, steam explosion, and high-temperature steaming) and ionic liquids generally generate inhibitors to the following fermentation process. Furfural is one of the typical inhibitors generated in hydrothermal treatment of biomass. Furfural could inhibit cell growth rate and decrease biofuel productivity of microbes. Candida tropicalis is a promising microbe for the production of biofuels and value-added chemicals using hemicellulose hydrolysate as carbon source. In this study, C. tropicalis showed a comparable ability of furfural tolerance during fermentation. We investigated the mechanism of C. tropicalis 's robust tolerance to furfural and relevant metabolic responses to obtain more information for metabolic engineering of microbes for efficient lignocellulose fermentation. Candida tropicalis showed comparable intrinsic tolerance to furfural and a fast rate of furfural detoxification. C. tropicalis 's half maximal inhibitory concentration for furfural with xylose as the sole carbon source was 3.69 g/L, which was higher than that of most wild-type microbes reported in the literature to our knowledge. Even though furfural prolonged the lag phase of C. tropicalis , the final biomass in the groups treated with 1 g/L furfural was slightly greater than that in the control groups. By real-time PCR analysis, we found that the expression of ADH1 in C. tropicalis ( ctADH1 ) was induced by furfural and repressed by ethanol after furfural depletion. The expression of ctADH1 could be regulated by both furfural and ethanol. After the disruption of gene ctADH1 , we found that C. tropicalis 's furfural tolerance was weakened. To further confirm the function of ctADH1 and enhance Escherichia coli 's furfural tolerance, ctADH1 was overexpressed in E. coli BL21 (DE3). The rate of furfural degradation in E. coli BL21 (DE3) with pET-ADH1 (high-copy plasmid) and pCS-ADH1 (medium-copy plasmid) was increased

Acid hydrolysis of Curcuma longa residue for ethanol and lactic acid fermentation.

Science.gov (United States)

Nguyen, Cuong Mai; Nguyen, Thanh Ngoc; Choi, Gyung Ja; Choi, Yong Ho; Jang, Kyoung Soo; Park, Youn-Je; Kim, Jin-Cheol

2014-01-01

This research examines the acid hydrolysis of Curcuma longa waste, to obtain the hydrolysate containing lactic acid and ethanol fermentative sugars. A central composite design for describing regression equations of variables was used. The selected optimum condition was 4.91% sulphuric acid, 122.68°C and 50 min using the desirability function under the following conditions: the maximum reducing sugar (RS) yield is within the limited range of the 5-hydroxymethylfurfural (HMF) and furfural concentrations. Under the condition, the obtained solution contained 144 g RS/L, 0.79 g furfural/L and 2.59 g HMF/L and was directly fermented without a detoxification step. The maximum product concentration, average productivity, RS conversion and product yield were 115.36 g/L, 2.88 g/L/h, 89.43% and 64% for L-lactic acid; 113.92 g/L, 2.59 g/L/h, 88.31% and 63.29% for D-lactic acid; and 55.03 g/L, 1.38 g/L/h, 42.66 and 30.57%, respectively, for ethanol using a 7-L jar fermenter. Copyright © 2013. Published by Elsevier Ltd.

PENGEMBANGAN METODE SINTESIS FURFURAL BERBAHAN DASAR CAMPURAN LIMBAH PERTANIAN DALAM RANGKA MEWUJUDKAN PRINSIP GREEN CHEMISTRY (Development Of Synthesis Method Of Furfural From Compost Heap Mixture To Reach Out Green Chemistry Principles

Directory of Open Access Journals (Sweden)

Mitarlis Mitarlis

2011-11-01

Full Text Available ABSTRAK Penelitian pengembangan metode sintesis furfural dengan bahan dasar campuran limbah pertanian dilakukan dengan tujuan untuk menentukan waktu pemanasan dan konsentrasi asam optimum serta mewujudkan prinsip green chemistry. Dalam penelitian ini digunakan campuran limbah pertanian ampas tebu, limbah daun nanas dan limbah tanaman jagung dengan perbandingan 1:1:1. Proses sintesis melalui tahap hidrolisis pentosan, dehidrasi, dan siklodehidrasi untuk membentuk furfural dengan menggunakan alat refluks termodifkasi. Identifikasi furfural menggunakan uji warna dengan anilin asetat, uji indeks bias, spektrofotometer UV-Vis, dan IR, serta GC. Analisis pemenuhan prinsip green chemistry menggunakan daftar ceck 12 prinsip green chemstry. Hasil penelitian menunjukkan bahwa: Waktu pemanasan dan konsentrasi asam sulfat optimum pada pembuatan furfural dari campuran limbah pertanian adalah 5 jam dan konsentrasi asam sulfat 10% (1,876 M dengan rendemen sebesar 5,58%. Metode sintesis furfural yang dikembangkan dapat memenuhi 11 dari 12 prinsip green chemistry yang telah ditetapkan. ABSTRACT The study of developing furfural synthesis method  from  compost heap mixture had been done to determine  optimum condition for this process and  to reach out the green chemistry principles. In this research, the compost heap mixture is from three kinds of compost heap (bagasse, pineapple leaf, waste of corn plant with same amount (1:1:1. The steps of furfural production process are hydrolysis of pentose by sulfuric acid, dehydration, and cyclodehydration to form furfural. It was produced by using a modification reflux apparatus. Identify of furfural product by  using qualitative analysis color test with aniline acetate, refractive index test, UV-Vis,  IR spectrophotometer, and GC. Green chemistry principles are analyzed by using check list of 12 principles of green chemistry.  Based on this research was obtained that the optimum concentration of sulfuric acid is

HIDROGENACIÓN DE FURFURAL SOBRE CATALIZADORES Ir/Nb2O5. ESTUDIO CINÉTICO

Directory of Open Access Journals (Sweden)

HUGO ROJAS

2008-01-01

Full Text Available Se estudió la cinética de hidrogenación de furfural sobre el catalizador Ir/Nb2O5 que presenta el efecto SMSI (Fuerte interacción metal soporte. Se examinaron el efecto de diferentes parámetros de reacción como concentración inicial en el rango de 0,025 a 0,1 M, presión parcial en el rango de 0,48 MPa a 0,98 Mpa, temperatura de 353 a 393 K y peso del catalizador de 0,1 a 0,4 g. Se encontró una alta selectividad hacía el alcohol insaturado, (alcohol furfurílico, que es el producto más importante de esta reacción. Solventes alcohólicos producen trazas de acetales, especialmente de 2,6 dietil-acetal. Las velocidades iniciales de la hidrogenación de furfural con respecto al estudio de la presión y concentración se incrementaron linealmente con la masa del catalizador, lo que demuestra la ausencia de fenómenos de transporte. La cinética de la reacción se representó con un modelo Langmuir-Hinshelwood (LH con un solo tipo de sitio activo. La adición de un átomo de hidrógeno sobre la molécula orgánica demostró ser la etapa determinante de la reacción, ajustándose a los datos experimentales.

Insertion of transposon in the vicinity of SSK2 confers enhanced tolerance to furfural in Saccharomyces cerevisiae

Energy Technology Data Exchange (ETDEWEB)

Kim, Hyun-Soo [Ewha Womans Univ., Seoul (Korea, Republic of). Dept. of Life Science; Kim, Na-Rae [Ewha Womans Univ., Seoul (Korea, Republic of). Div. of Life and Pharmaceutical Sciences; Kim, Wankee [Ewha Womans Univ., Seoul (Korea, Republic of). Dept. of Life Science; Ajou Univ., Suwon (Korea, Republic of). Inst. for Medical Sciences; Choi, Wonja [Ewha Womans Univ., Seoul (Korea, Republic of). Dept. of Life Science; Ewha Womans Univ., Seoul (Korea, Republic of). Microbial Resources Research Center

2012-07-15

Furfural is one of the major inhibitors generated during sugar production from cellulosic materials and, as an aldehyde, inhibits various cellular activities of microorganisms used, leading to prolonged lag time during ethanologenic fermentation. Since Saccharomyces cerevisiae strains tolerant to furfural are of great economic benefit in producing bioethanol, much effort to obtain more efficient strains continues to be made. In this study, we examined the furfural tolerance of transposon mutant strains (Tn 1-5) with enhanced ethanol tolerance and found that one of them (Tn 2), in which SSK2 is downregulated at the transcriptional level, displayed improved furfural tolerance. Such phenotype was abolished by complementation of the entire open reading frame of SSK2, which encodes a mitogen-activated protein (MAP) kinase kinase kinase of the high osmolarity glycerol (HOG) signaling pathway, suggesting an inhibitory effect of SSK2 in coping with furfural stress. Tn 2 showed a significant decrease in the intracellular level of reactive oxygen species (ROS) and early and high activation of Hog1p, a MAP kinase integral to the HOG pathway in response to furfural. The transcriptional levels of CTT1 and GLR1, two of known Hog1p downstream target genes whose protein products are involved in reducing ROS, were increased by 43 % and 56 % respectively compared with a control strain, probably resulting in the ROS decrease. Tn 2 also showed a shortened lag time during fermentation in the presence of furfural, resulting from efficient conversion of furfural to non-toxic (or less toxic) furfuryl alcohol. Taken together, the enhanced furfural tolerance of Tn 2 is suggested to be conferred by the combined effect of an early event of less ROS accumulation and a late event of efficient detoxification of furfural. (orig.)

Insertion of transposon in the vicinity of SSK2 confers enhanced tolerance to furfural in Saccharomyces cerevisiae.

Science.gov (United States)

Kim, Hyun-Soo; Kim, Na-Rae; Kim, Wankee; Choi, Wonja

2012-07-01

Furfural is one of the major inhibitors generated during sugar production from cellulosic materials and, as an aldehyde, inhibits various cellular activities of microorganisms used, leading to prolonged lag time during ethanologenic fermentation. Since Saccharomyces cerevisiae strains tolerant to furfural are of great economic benefit in producing bioethanol, much effort to obtain more efficient strains continues to be made. In this study, we examined the furfural tolerance of transposon mutant strains (Tn 1-5) with enhanced ethanol tolerance and found that one of them (Tn 2), in which SSK2 is downregulated at the transcriptional level, displayed improved furfural tolerance. Such phenotype was abolished by complementation of the entire open reading frame of SSK2, which encodes a mitogen-activated protein (MAP) kinase kinase kinase of the high osmolarity glycerol (HOG) signaling pathway, suggesting an inhibitory effect of SSK2 in coping with furfural stress. Tn 2 showed a significant decrease in the intracellular level of reactive oxygen species (ROS) and early and high activation of Hog1p, a MAP kinase integral to the HOG pathway in response to furfural. The transcriptional levels of CTT1 and GLR1, two of known Hog1p downstream target genes whose protein products are involved in reducing ROS, were increased by 43 % and 56 % respectively compared with a control strain, probably resulting in the ROS decrease. Tn 2 also showed a shortened lag time during fermentation in the presence of furfural, resulting from efficient conversion of furfural to non-toxic (or less toxic) furfuryl alcohol. Taken together, the enhanced furfural tolerance of Tn 2 is suggested to be conferred by the combined effect of an early event of less ROS accumulation and a late event of efficient detoxification of furfural.

Effect of Furfural, Vanillin and Syringaldehyde on Candida guilliermondii Growth and Xylitol Biosynthesis

Science.gov (United States)

Kelly, Christine; Jones, Opal; Barnhart, Christopher; Lajoie, Curtis

Xylitol is a five-carbon sugar alcohol with established commercial use as an alternative sweetener and can be produced from hemicellulose hydrolysate. However, there are difficulties with microbiological growth and xylitol biosynthesis on hydrolysate because of the inhibitors formed from hydrolysis of hemicellulose. This research focused on the effect of furfural, vanillin, and syringaldehyde on growth of Candida guilliermondii and xylitol accumulation from xylose in a semi-synthetic medium in microwell plate and bioreactor cultivations. All three compounds reduced specific growth rate, increased lag time, and reduced xylitol production rate. In general, increasing concentration of inhibitor increased the severity of inhibition, except in the case of 0.5 g vanillin per liter, which resulted in a faster late batch phase growth rate and increased biomass yield. At concentrations of 1 g/1 or higher, furfural was the least inhibitory to growth, followed by syringaldehyde. Vanillin most severely reduced specific growth rate. All three inhibitors reduced xylitol production rate approximately to the same degree.

Production of furfural from xylose, xylan and corncob in gamma-valerolactone using FeCl3·6H2O as catalyst.

Science.gov (United States)

Zhang, Luxin; Yu, Hongbing; Wang, Pan; Li, Yong

2014-01-01

An efficient and simple one-pot monophasic reaction system with small carbon footprint for converting xylose, xylan and corncob into furfural was developed in gamma-valerolactone (GVL, an ideal sustainable solvent derived from lignocelluloses) by using FeCl3·6H2O as catalyst. Good yields of furfural from xylose were obtained, and the system was shown to work for xylan and corncob as well. A surprisingly high furfural yield of 79.6% from untreated corncob was achieved at 458 K for 100 min. Contrary to what was generally believed, the addition of water, reduced the rate of the reactions, but showed positive effect on preventing the furfural from degradation in GVL. Besides, the C6 sugars (glucose and cellulose) afforded 11.4-24.5% furfural yields when employing this catalytic approach. The reaction system proposed in this manuscript showed great potential for optimizing the catalytic process in furfural production. Copyright © 2013 Elsevier Ltd. All rights reserved.

Production of furfural from pentosan-rich biomass: analysis of process parameters during simultaneous furfural stripping.

Science.gov (United States)

Agirrezabal-Telleria, I; Gandarias, I; Arias, P L

2013-09-01

Among the furan-based compounds, furfural (FUR) shows interesting properties as building-block or industrial solvent. It is produced from pentosan-rich biomass via xylose cyclodehydration. The current FUR production makes use of homogeneous catalysts and excessive amounts of steam. The development of greener furfural production and separation techniques implies the use of heterogeneous catalysts and innovative separation processes. This work deals with the conversion of corncobs as xylose source to be dehydrated to furfural. The results reveal differences between the use of direct corncob hydrolysis and dehydration to furfural and the prehydrolysis and dehydration procedures. Moreover, this work focuses on an economical analysis of the main process parameters during N2-stripping and its economical comparison to the current steam-stripping process. The results show a considerable reduction of the annual utility costs due to use of recyclable nitrogen and the reduction of the furfural purification stages. Copyright © 2013 Elsevier Ltd. All rights reserved.

PENGARUH WAKTU HIDROLISIS DAN KONSENTRASI KATALISATOR ASAM SULFAT TERHADAP SINTESIS FURFURAL DARI JERAMI PADI

Directory of Open Access Journals (Sweden)

Primata Mardina

2014-10-01

Full Text Available Rice straws are one of the hemicellulose-contained wastes, which one of its main components is pentosan. Pentosan can be reacted into furfural with acid catalytic hydrolysis reaction. This research is intended to find out the effect of hydrolysis durations and sulfuric acid (H2SO4 catalyst concentrations towards yield of furfural from rice straws. The synthesis of furfural from rice straws is conducted by refined the rice straws, then hydrolyze it with different concentrations of sulfuric acid solution (1%, 3%, and 5% v/v and with different durations of hydrolysis reaction (1 hour, 2 hours, 3 hours, 4 hours, dan 5 hours. This hydrolisis reaction produced liquid, which are distilled to separate furfural from sulfuric acid solution. The results of this research show the yield of furfural from rice straws hydrolysis is inversely proportional to sulfuric acid catalyst concentration and hydrolysis duration. The best yield of furfural was 5,441%, which obtained with 1% sulfuric acid catalyst concentration and 1 hour hydrolysis duration.

Properties of 13HMF steel welded joints after long-lasting service

International Nuclear Information System (INIS)

Zeman, M.

2002-01-01

Results are presented of research conducted on the 13HMF steel in the as-received condition after long-lasting service over 100000 hours. Simulation tests have been performed by means of modern research methods. The influence of thermal cycles on the microstructure (continuous cooling TTT diagrams), plastic properties (notch toughness and hardness) of simulated heat affected zones and reheat cracking resistance has been evaluated by using the thermal and strain cycle simulator. Susceptibility to thermal fatigue has been determined, the creep strength estimated and welding heat input was given, as well as the post weld heat treatment conditions of the 13HMF steel after service. properties of the welded joints made of 13HMF steel after long-lasting service are given. (author)

Selective hydrogenation of furfural on Ir/TiO2 catalysts

Directory of Open Access Journals (Sweden)

Patricio Reyes

2010-01-01

Full Text Available Titania-supported Ir catalysts were used in the hydrogenation of furfural. Reactions were carried out in a stirred batch type reactor at 0.62MPa and 363K using a 0.10M solution of furfural in a 1:1 mixture n-heptane -ethanol as solvent. Catalysts containing 2 wt% of Ir were reduced in H2 flow at different temperatures in the range 473-773K. The catalysts were characterized by H2 chemisorption, TEM, TPR, TPD of NH3 and XPS. Conversion of furfural is higher at lower reduction temperatures, but leads to byproducts whereas reduction at higher temperatures shows selectivity to furfuryl alcohol close to 100%.

Removal of Furfural From Wastewater Using Integrated Catalytic Ozonation and Biological Approaches

Directory of Open Access Journals (Sweden)

Mostafa Leili

2014-12-01

Full Text Available Furfural with a chemical formula of C5H4O2 is a toxic compound which has several health problems for both humans and environment. It has a few exposure routes for entering the human body such as oral, dermal or nasal. In the present study, the efficacies of an integrated catalytic ozonation process (COP and novel cyclic biological reactor (CBR were explored for the removal of furfural from aqueous solutions. Activated carbon was purchased from Merck Company. It had a Brunauer, Emmett, and Teller (BET specific surface area of 1100 m2/g, with an average micropore volume and size of 0.385 cm3/g and 595 µm, respectively. The results indicated that 30% pretreatment with COP could increase furfural and chemical oxygen demand (COD removal efficiency with CBR 5.56% and 27.01%, respectively. With 70% pretreatment by COP, 98.57% furfural and 95.34% COD removal efficiencies happen in CBR. Generally, batch and continuous experiments showed that the integrated COP/CBR could be efficient in eliminating furfural from wastewater and thus may be a promising technique for treating furfural-containing wastewater.

Direct conversion from Jerusalem artichoke to hydroxymethylfurfural (HMF) using the Fenton reaction.

Science.gov (United States)

Seo, Yeong Hwan; Han, Jong-In

2014-05-15

A simple method for hydroxymethylfurfural (HMF) production from non-crop biomass of the Jerusalem artichoke was developed using the Fenton reaction, in a mixture of 2-butanol and water. Four parameters (temperature, reaction time, Fe(2+) concentration, and H2O2 concentration) were identified as experimental factors, and HMF yield was selected as the response parameter. The experimental factors were optimised by employing Response Surface Methodology (RSM). The maximum HMF yield, of 46%, was obtained with a reaction time of 90 min, Fe(2+) concentration of 1.3 mM, and 0.47 M of H2O2 at 180 °C. Copyright © 2014. Published by Elsevier Ltd.

Molecular sieve adsorbents and membranes for applications in the production of renewable fuels and chemicals

Science.gov (United States)

Ranjan, Rajiv

Metal organic frameworks (MOF), a new class of porous materials, have emerged as promising candidate for gas storage, separation membrane and chemical sensors. We used secondary growth method to grow microporous metal organic framework (MMOF) films on porous alumina supports. Examination of the film using SEM and XRD showed that the crystals were well inter-grown and preferentially oriented. Gas permeation study showed that membranes were defect free and moderate selectivity was achieved for H2/N2 gas pairs. The next project had to do with ethanol production from lignocellulosic biomass as an alternate energy source. However, toxic inhibitors produced from the hydrolysis of biomass decrease ethanol yield during the fermentation process. We demonstrated the use of zeolites for the pretreatment of hydrolyzate in order to remove inhibitors like 5-Hydroxymethylfurfuraldehyde (HMF) and furfural from aqueous solution. Zeolites exhibit preferential adsorption of the inhibitors and in effect improve the ethanol yield during fermentation. Ideal Adsorbed Solution Theory (IAST) was also used to predict adsorption isotherms for HMF-furfural mixtures using single component adsorption data. We also studied production of HMF, a potential substitute as a building block for plastic and chemical production, from renewable biomass resources. Catalytic dehydration of fructose for HMF production faces problems like low conversion and yield. Dimethyl sulfoxide (DMSO) can be used as the solvent as well as the catalyst resulting in high HMF yield. We studied a reaction-separation system for this dehydration reaction where the product (HMF) could be recovered by selective adsorption on solid adsorbents from the reaction mixture.

Studi Kinetika Dekomposisi Glukosa pada Temperatur Tinggi

Directory of Open Access Journals (Sweden)

Fika Anjana

2014-09-01

Full Text Available Glukosa banyak dimanfaatkan untuk proses dekomposisi dan menghasilkan beberapa senyawa anorganik, dalam penelitian ini salah satu produk yang di hasilkan dalam produksi dekomposisi glukosa adalah HMF (5-hydroxymethyl-2-furaldehyde. Penelitian ini bertujuan untuk mempelajari proses dekomposisi glukosa pada tekanan dan temperature tinggi dimana tekanan dibuat konstan 10 atm dengan bantuan gas nitrogen sedangkan temperature berkisar antara 140-180 °C. Pengaruh konsentrasi asam sulfat dipelajari untuk mengetahui aspek kinetika. Dari penelitian ini didapat dekomposisi glukosa mengikuti orde satu dengan 5-HMF sebagai produk paling banyak sedangkan harga energi aktivasi didapat paling besar 1426.68 J/mol pada komsemtrasi asam sulfat 0.4 N dan konsentrasi HMF paling banyak didapat pada suhu 180, waktu 40 menit sebesar 0.00949 mol/L dengan konsentrasi asam sulfat sebesar 0.4 N.

The impact of stress-response related transcription factors on lignocellulosic hydrolysate inhibitor tolerance of Saccharomyces strains

Science.gov (United States)

Plant biomass is a desirable feedstock for the production of renewable fuels and chemicals. Unfortunately, pretreatment processes to release sugars locked in plant biomass, or lignocellulosic feedstocks, lead to the production of fermentation inhibitors, such as furfural and hydroxymethyl furfural, ...

Flux control-based design of furfural-resistance strains of Saccharomyces cerevisiae for lignocellulosic biorefinery.

Science.gov (United States)

Unrean, Pornkamol

2017-04-01

We have previously developed a dynamic flux balance analysis of Saccharomyces cerevisiae for elucidation of genome-wide flux response to furfural perturbation (Unrean and Franzen, Biotechnol J 10(8):1248-1258, 2015). Herein, the dynamic flux distributions were analyzed by flux control analysis to identify target overexpressed genes for improved yeast robustness against furfural. The flux control coefficient (FCC) identified overexpressing isocitrate dehydrogenase (IDH1), a rate-controlling flux for ethanol fermentation, and dicarboxylate carrier (DIC1), a limiting flux for cell growth, as keys of furfural-resistance phenotype. Consistent with the model prediction, strain characterization showed 1.2- and 2.0-fold improvement in ethanol synthesis and furfural detoxification rates, respectively, by IDH1 overexpressed mutant compared to the control. DIC1 overexpressed mutant grew at 1.3-fold faster and reduced furfural at 1.4-fold faster than the control under the furfural challenge. This study hence demonstrated the FCC-based approach as an effective tool for guiding the design of robust yeast strains.

Determination and Quantification of 5-Hydroxymethylfurfural in Vinegars and Soy Sauces

Directory of Open Access Journals (Sweden)

Li-Li Zhang

2017-01-01

Full Text Available The organic compound 5-hydroxymethylfurfural (HMF can be formed from sugars under Maillard reaction and caramelization. In order to study the formation regular of HMF in sugary liquid condiment, vinegar and soy sauce were selected. High-performance liquid chromatography (HPLC was used to determine the HMF concentrations of various brands of soy sauce and vinegar. The result showed that HMF concentrations were in a range of 0.42 to 115.43 mg/kg for vinegar samples and 0.43 to 5.85 mg/kg for soy sauce samples. The concentrates of HMF were expressed in zero-order kinetics model at 100°C before the maximum HMF generation in all of the tested samples. Longer heating treatment time would reduce the HMF content in tested samples. In addition, HMF content had obviously positive correlation with sugar contents in vinegar samples, but no similar rule was found in soy sauces.

Behaviors of glucose decomposition during acid-catalyzed hydrothermal hydrolysis of pretreated Gelidium amansii.

Science.gov (United States)

Jeong, Tae Su; Choi, Chang Ho; Lee, Ji Ye; Oh, Kyeong Keun

2012-07-01

Acid-catalyzed hydrothermal hydrolysis is one path to cellulosic glucose and subsequently to its dehydration end products such as hydroxymethyl furfural (HMF), formic acid and levulinic acid. The effect of sugar decomposition not only lowers the yield of fermentable sugars but also forms decomposition products that inhibit subsequent fermentation. The present experiments were conducted with four different acid catalysts (H(2)SO(4), HNO(3), HCl, and H(3)PO(4)) at various acid normalities (0.5-2.1N) in batch reactors at 180-210 °C. From the results, H(2)SO(4) was the most suitable catalyst for glucose production, but glucose decomposition occurred during the hydrolysis. The glucose production was maximized at 160.7 °C, 2.0% (w/v) H(2)SO(4), and 40 min, but resulted in a low glucan yield of 33.05% due to the decomposition reactions, which generated formic acid and levulinic acid. The highest concentration of levulinic acid, 7.82 g/L, was obtained at 181.2 °C, 2.0% (w/v) H(2)SO(4), and 40 min. Copyright © 2012 Elsevier Ltd. All rights reserved.

Pyrochars from bioenergy residue as novel bio-adsorbents for lignocellulosic hydrolysate detoxification.

Science.gov (United States)

Monlau, F; Sambusiti, C; Antoniou, N; Zabaniotou, A; Solhy, A; Barakat, A

2015-01-01

The robust supramolecular structure of biomass often requires severe pretreatments conditions to produce soluble sugars. Nonetheless, these processes generate some inhibitory compounds (i.e. furans compounds and aliphatic acids) deriving mainly from sugars degradation. To avoid the inhibition of the biological process and to obtain satisfactory sugars conversion level into biofuels, a detoxification step is required. This study investigates the use of two pyrochars derived from solid anaerobic digestates for the detoxification of lignocellulosic hydrolysates. At a pyrochar concentration of 40gL(-1), more than 94% of 5-HMF and 99% of furfural were removed in the synthetic medium after 24h of contact time, whereas sugars concentration remained unchanged. Furfural was adsorbed faster than 5-HMF by both pyrochars and totally removed after 3h of contact. Finally, the two pyrochars were found efficient in the detoxification of corn stalks and Douglas fir wood chips hydrolysates without affecting the soluble sugars concentrations. Copyright © 2015 Elsevier Ltd. All rights reserved.

The quantum HMF model: I. Fermions

International Nuclear Information System (INIS)

Chavanis, Pierre-Henri

2011-01-01

We study the thermodynamics of quantum particles with long-range interactions at T = 0. Specifically, we generalize the Hamiltonian mean-field (HMF) model to the case of fermions. We consider the Thomas–Fermi approximation that becomes exact in a proper thermodynamic limit N→+∞ with a coupling constant k ∼ N. The equilibrium configurations, described by the mean-field Fermi (or waterbag) distribution, are equivalent to polytropes of index n = 1/2. We show that the homogeneous phase, which is unstable in the classical regime, becomes stable in the quantum regime. The homogeneous phase is stabilized by the Pauli exclusion principle. This takes place through a first-order phase transition where the control parameter is the normalized Planck constant. The homogeneous phase is unstable for ℎ c ≡2/√(π), metastable for ℎ c t ≡1.16 and stable for ℎ>ℎ t . The inhomogeneous phase is stable for ℎ t , metastable for ℎ t * ≡1.18 and disappears for ℎ>ℎ * (for ℎ c * , there exists an unstable inhomogeneous phase with magnetization 0 * ≡ 0.37). We point out analogies between the fermionic HMF model and the concept of fermion stars in astrophysics. Finally, as a by-product of our analysis, we obtain new results concerning the Vlasov dynamical stability of the waterbag distribution which is the ground state of the Lynden-Bell distribution in the theory of violent relaxation of the classical HMF model. We show that spatially homogeneous waterbag distributions are Vlasov-stable iff ε ≥ ε c = 1/3 and spatially inhomogeneous waterbag distributions are Vlasov-stable iff ε ≤ ε * = 0.379 and b ≥ b * = 0.37, where ε and b are the normalized energy and magnetization. The magnetization curve displays a first-order phase transition at ε t = 0.352 and the domain of metastability ranges from ε c to ε *

Antioxidant effect of Citrullus vulgaris (watermelon) extract against ...

African Journals Online (AJOL)

The Antioxidant effect of Citrullus Vulgaris (Watermelon) extract was evaluated against lipid oxidation in freshly caught fishes during cooking. GC-MS analysis of Hexane and total phenolic extract of Citrullus Vulgaris flesh reveals that the extracts contain 55 compounds which includes 5- hydroxymethyl furfural, ...

Kinetics of levulinic acid and furfural production from Miscanthus × giganteus.

Science.gov (United States)

Dussan, K; Girisuta, B; Haverty, D; Leahy, J J; Hayes, M H B

2013-12-01

This study investigated the kinetics of acid hydrolysis of the cellulose and hemicellulose in Miscanthus to produce levulinic acid and furfural under mild temperature and high acid concentration. Experiments were carried out in an 8L-batch reactor with 9%-wt. biomass loading, acid concentrations between 0.10 and 0.53 M H2SO4, and at temperatures between 150 and 200°C. The concentrations of xylose, glucose, furfural, 5-hydroxymethylfurfural and levulinic acid were used in two mechanistic kinetic models for the prediction of the performance of ideal continuous reactors for the optimisation of levulinic acid and the concurrent production of furfural. A two-stage arrangement was found to maximise furfural in the first reactor (PFR - 185°C, 0.5M H2SO4, 27.3%-mol). A second stage leads to levulinic acid yields between 58% and 72%-mol at temperatures between 160 and 200°C. Copyright © 2013 Elsevier Ltd. All rights reserved.

Hydrolysis of Pentosan for Furfural Preparing Using Sulfuric Acid Catalyst to Improve Diesel Engine Fuel Quality

International Nuclear Information System (INIS)

Setyadji, Moch

2007-01-01

The investigation on furfural preparation from peanut shell using sulfuric acid catalyst has been done. Furfural is an organic solvent used in industry especially petroleum industry. The purpose of this investigation is to know the effects of sulfuric acid concentration and solvent feed ratio towards furfural resulted and the reaction kinetics. The experiment was performed in the batch reactor. The result of this investigation showed that the process optimum condition was reached at sulfuric acid concentration of 7% and the solvent feed ratio of 12.5. The result at the optimum condition above was 5.97% of furfural. The relation between percentage of furfural resulted (Y) and sulfuric acid concentration (X) is Y = 0.893 X 1.7023 . e -0.2554X with average deviation of 5.880 %. The relation between percentage of furfural resulted (Y) and solvent feed ratio (X) is Y = -53.0411 + 9.4137 X - 0.3780 X 2 with average deviation 5.154 %. The relation between reaction rate constant (Y) and sulfuric acid concentration (X) is Y = 3.1916 . 10 -3 + 8.2432 . 10 -3 X - 5.2324 . 10 -4 X 2 with average deviation 8.024 %. (author)

Investigation of furfural biodegradation in a continuous inflow cyclic biological reactor.

Science.gov (United States)

Moussavi, Gholamreza; Leili, Mostafa; Nadafi, Kazem

2016-01-01

The performance of a continuous inflow cyclic biological reactor (CBR) containing moving media was investigated for the degradation of high concentrations of furfural. The effects of hydraulic retention time (HRT) and furfural initial concentrations (loading rate), as main operating parameters, on the bioreactor performance were studied. The results indicated that the CBR could remove over 98% of furfural and 71% of its chemical oxygen demand (COD) at inlet furfural concentrations up to 1,200 mg L(-1) (2.38 g L(-1) d(-1)), a 6-h cycle time and HRT of 12.1 h. The removal efficiency decreased slightly from 98 to 94% when HRT decreased from 12.1 to 10.5 h. The average removal efficiency of furfural and COD during the 345-day operational period under steady-state conditions were 97.7% and 82.1%, respectively. The efficiency also increased approximately 17.2% after addition of synthetic polyurethane cubes as moving media at a filling ratio of 10%.

Furfural-tolerant Zymomonas mobilis derived from error-prone PCR-based whole genome shuffling and their tolerant mechanism.

Science.gov (United States)

Huang, Suzhen; Xue, Tingli; Wang, Zhiquan; Ma, Yuanyuan; He, Xueting; Hong, Jiefang; Zou, Shaolan; Song, Hao; Zhang, Minhua

2018-04-01

Furfural-tolerant strain is essential for the fermentative production of biofuels or chemicals from lignocellulosic biomass. In this study, Zymomonas mobilis CP4 was for the first time subjected to error-prone PCR-based whole genome shuffling, and the resulting mutants F211 and F27 that could tolerate 3 g/L furfural were obtained. The mutant F211 under various furfural stress conditions could rapidly grow when the furfural concentration reduced to 1 g/L. Meanwhile, the two mutants also showed higher tolerance to high concentration of glucose than the control strain CP4. Genome resequencing revealed that the F211 and F27 had 12 and 13 single-nucleotide polymorphisms. The activity assay demonstrated that the activity of NADH-dependent furfural reductase in mutant F211 and CP4 was all increased under furfural stress, and the activity peaked earlier in mutant than in control. Also, furfural level in the culture of F211 was also more rapidly decreased. These indicate that the increase in furfural tolerance of the mutants may be resulted from the enhanced NADH-dependent furfural reductase activity during early log phase, which could lead to an accelerated furfural detoxification process in mutants. In all, we obtained Z. mobilis mutants with enhanced furfural and high concentration of glucose tolerance, and provided valuable clues for the mechanism of furfural tolerance and strain development.

Furfural production using ionic liquids: A review.

Science.gov (United States)

Peleteiro, Susana; Rivas, Sandra; Alonso, José Luis; Santos, Valentín; Parajó, Juan Carlos

2016-02-01

Furfural, a platform chemical with a bright future, is commercially obtained by acidic processing of xylan-containing biomass in aqueous media. Ionic liquids (ILs) can be employed in processed for furfural manufacture as additives, as catalysts and/or as reaction media. Depending on the IL utilized, externally added catalysts (usually, Lewis acids, Brönsted acids and/or solid acid catalysts) can be necessary to achieve high reaction yields. Oppositely, acidic ionic liquids (AILs) can perform as both solvents and catalysts, enabling the direct conversion of suitable substrates (pentoses, pentosans or xylan-containing biomass) into furfural. Operating in IL-containing media, the furfural yields can be improved when the product is continuously removed along the reaction (for example, by stripping or extraction), to avoid unwanted side-reactions leading to furfural consumption. These topics are reviewed, as well as the major challenges involved in the large scale utilization of ILs for furfural production. Copyright © 2015 Elsevier Ltd. All rights reserved.

Physicochemical pretreatments and hydrolysis of furfural residues via carbon-based sulfonated solid acid.

Science.gov (United States)

Ma, Bao Jun; Sun, Yuan; Lin, Ke Ying; Li, Bing; Liu, Wan Yi

2014-03-01

Potential commercial physicochemical pretreatment methods, NaOH/microwave and NaOH/ultrasound were developed, and the carbon-based sulfonated solid acid catalysts were prepared for furfural residues conversion into reducing sugars. After the two optimum pretreatments, both the content of cellulose increased (74.03%, 72.28%, respectively) and the content of hemicellulose (94.11%, 94.17% of removal rate, respectively) and lignin (91.75%, 92.09% of removal rate, respectively) decreased in furfural residues. The reducing sugar yields of furfural residues with the two physicochemical pretreatments on coal tar-based solid acid reached 33.94% and 33.13%, respectively, higher than that pretreated via NaOH alone (27%) and comparable to that pretreated via NaOH/H2O2 (35.67%). The XRD patterns, IR spectra and SEM images show microwave and ultrasound improve the pretreatment effect. The results demonstrate the carbon-based sulfonated solid acids and the physicochemical pretreatments are green, effective, low-cost for furfural residues conversion. Copyright © 2014 Elsevier Ltd. All rights reserved.

Dehydration of xylose to furfural over MCM-41-supported niobium-oxide catalysts.

Science.gov (United States)

García-Sancho, Cristina; Sádaba, Irantzu; Moreno-Tost, Ramón; Mérida-Robles, Josefa; Santamaría-González, José; López-Granados, Manuel; Maireles-Torres, Pedro

2013-04-01

A series of silica-based MCM-41-supported niobium-oxide catalysts are prepared, characterized by using XRD, N2 adsorption-desorption, X-ray photoelectron spectroscopy, Raman spectroscopy, and pyridine adsorption coupled to FTIR spectroscopy, and tested for the dehydration of D-xylose to furfural. Under the operating conditions used all materials are active in the dehydration of xylose to furfural (excluding the MCM-41 silica support). The xylose conversion increases with increasing Nb2 O5 content. At a loading of 16 wt % Nb2 O5 , 74.5 % conversion and a furfural yield of 36.5 % is achieved at 170 °C, after 180 min reaction time. Moreover, xylose conversion and furfural yield increase with the reaction time and temperature, attaining 82.8 and 46.2 %, respectively, at 190 °C and after 100 min reaction time. Notably, the presence of NaCl in the reaction medium further increases the furfural yield (59.9 % at 170 °C after 180 min reaction time). Moreover, catalyst reutilization is demonstrated by performing at least three runs with no loss of catalytic activity and without the requirement for an intermediate regeneration step. No significant niobium leaching is observed, and a relationship between the structure of the catalyst and the activity is proposed. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Identification of the 7-Hydroxymethyl Chlorophyll a Reductase of the Chlorophyll Cycle in Arabidopsis[W

Science.gov (United States)

Meguro, Miki; Ito, Hisashi; Takabayashi, Atsushi; Tanaka, Ryouichi; Tanaka, Ayumi

2011-01-01

The interconversion of chlorophyll a and chlorophyll b, referred to as the chlorophyll cycle, plays a crucial role in the processes of greening, acclimation to light intensity, and senescence. The chlorophyll cycle consists of three reactions: the conversions of chlorophyll a to chlorophyll b by chlorophyllide a oxygenase, chlorophyll b to 7-hydroxymethyl chlorophyll a by chlorophyll b reductase, and 7-hydroxymethyl chlorophyll a to chlorophyll a by 7-hydroxymethyl chlorophyll a reductase. We identified 7-hydroxymethyl chlorophyll a reductase, which is the last remaining unidentified enzyme of the chlorophyll cycle, from Arabidopsis thaliana by genetic and biochemical methods. Recombinant 7-hydroxymethyl chlorophyll a reductase converted 7-hydroxymethyl chlorophyll a to chlorophyll a using ferredoxin. Both sequence and biochemical analyses showed that 7-hydroxymethyl chlorophyll a reductase contains flavin adenine dinucleotide and an iron-sulfur center. In addition, a phylogenetic analysis elucidated the evolution of 7-hydroxymethyl chlorophyll a reductase from divinyl chlorophyllide vinyl reductase. A mutant lacking 7-hydroxymethyl chlorophyll a reductase was found to accumulate 7-hydroxymethyl chlorophyll a and pheophorbide a. Furthermore, this accumulation of pheophorbide a in the mutant was rescued by the inactivation of the chlorophyll b reductase gene. The downregulation of pheophorbide a oxygenase activity is discussed in relation to 7-hydroxymethyl chlorophyll a accumulation. PMID:21934147

Pretreatment of wheat straw using combined wet oxidation and alkaline hydrolysis resulting in convertible cellulose and hemicellulose

DEFF Research Database (Denmark)

Bjerre, A.B.; Bjerring Olesen, A.; Fernqvist, T.

1996-01-01

to 10 min) gave about 85% w/w yield of converting cellulose to glucose. The process water, containing dissolved hemicellulose and carboxylic acids, has proven to be a direct nutrient source for the fungus Aspergillus niger producing exo-beta-xylosidase. Furfural and hydroxymethyl-furfural, known...

Synthesis of 2',3'-dideoxy-3'-C-(hydroxymethyl)-4'-thiopentofuranosyl nucleosides as potential antiviral agent.

Science.gov (United States)

Ichikawa, E; Yamamura, S; Kato, K

1999-04-19

1-O-Acetyl-2,3-dideoxy-3-C-(hydroxymethyl)-4-thiofuranose derivative was synthesized from (S,S)-1,4-bis(benzyloxy)-2,3-epoxybutane derived from (+)-diethyl L-tartrate and the enantiomerically pure (E)-5-(2-bromovinyl)-1-[2',3'-dideoxy-3'-C-(hydroxymethyl)-beta-D-4'- thiopentofuranosyl]uracil 4 was obtained via coupling of silylated uracil followed by palladium-mediated coupling of methyl acrylate.

Gamma dosimetry using lyoluminescence of Tris (hydroxymethyl) aminomethane

International Nuclear Information System (INIS)

Mehta, S.K.; Oommen, I.K.; Sengupta, S.; Soman, S.D.

1983-01-01

Lyoluminescence (LL) of Tris (hydroxymethyl) aminomethane has been studied and compared with the LL of glucose, mannose, valine and glutamine. Among these materials, Tris (hydroxymethyl) aminomethane on dissolution in luminol shows the highest LL sensitivity and stability. The linear dosimetric range of this system is 0.1-2x10 2 Gy which makes it useful in the fields of radiotherapy and radiation processing of food. (orig.)

Furfural reduction mechanism of a zinc-dependent alcohol dehydrogenase from Cupriavidus necator JMP134

Science.gov (United States)

Kang, ChulHee; Hayes, Robert; Sanchez, Emiliano J.; Webb, Brian N.; Li, Qunrui; Hooper, Travis; Nissen, Mark S.; Xun, Luying

2012-01-01

Summary FurX is a tetrameric Zn-dependent alcohol dehydrogenase (ADH) from Cupriavidus necator JMP134. The enzyme rapidly reduces furfural with NADH as the reducing power. For the first time among characterized ADHs, the high-resolution structures of all reaction steps were obtained in a time-resolved manner, thereby illustrating the complete catalytic events of NADH-dependent reduction of furfural and the dynamic Zn2+ coordination among Glu66, water, substrate and product. In the fully closed conformation of the NADH complex, the catalytic turnover proved faster than observed for the partially closed conformation due to an effective proton transfer network. The domain motion triggered by NAD(H) association/dissociation appeared to facilitate dynamic interchanges in Zn2+ coordination with substrate and product molecules, ultimately increasing the enzymatic turnover rate. NAD+ dissociation appeared to be a slow process, involving multiple steps in concert with a domain opening and reconfiguration of Glu66. This agrees with the report that the cofactor is not dissociated from FurX during ethanol-dependent reduction of furfural, in which ethanol reduces NAD+ to NADH that is subsequently used for furfural reduction. PMID:22081946

Multiresponse kinetic modelling of Maillard reaction and caramelisation in a heated glucose/wheat flour system.

Science.gov (United States)

Kocadağlı, Tolgahan; Gökmen, Vural

2016-11-15

The study describes the kinetics of the formation and degradation of α-dicarbonyl compounds in glucose/wheat flour system heated under low moisture conditions. Changes in the concentrations of glucose, fructose, individual free amino acids, lysine and arginine residues, glucosone, 1-deoxyglucosone, 3-deoxyglucosone, 3,4-dideoxyglucosone, 5-hydroxymethyl-2-furfural, glyoxal, methylglyoxal and diacetyl concentrations were determined to form a multiresponse kinetic model for isomerisation and degradation reactions of glucose. Degradation of Amadori product mainly produced 1-deoxyglucosone. Formation of 3-deoxyglucosone proceeded directly from glucose and also Amadori product degradation. Glyoxal formation was predominant from glucosone while methylglyoxal and diacetyl originated from 1-deoxyglucosone. Formation of 5-hydroxymethyl-2-furfural from fructose was found to be a key step. Multi-response kinetic modelling of Maillard reaction and caramelisation simultaneously indicated quantitatively predominant parallel and consecutive pathways and rate limiting steps by estimating the reaction rate constants. Copyright © 2016 Elsevier Ltd. All rights reserved.

Ethanol production from hydrothermal pretreated corn stover with a loop reactor

DEFF Research Database (Denmark)

Xu, Jian; Thomsen, Mette Hedegaard; Thomsen, Anne Belinda

2010-01-01

to the different pretreatment times. The glucan recovered from liquid was from 4.9% to 5.6% and the total glucan recoveries from all the pretreatments were higher than 98%. Besides HMF and furfural, acetic, lactic, formic and glycolic acids were also found in the liquid phase. All the concentrations...

Enhanced furfural production from raw corn stover employing a novel heterogeneous acid catalyst.

Science.gov (United States)

Li, Wenzhi; Zhu, Yuanshuai; Lu, Yijuan; Liu, Qiyu; Guan, Shennan; Chang, Hou-Min; Jameel, Hasan; Ma, Longlong

2017-12-01

With the aim to enhance the direct conversion of raw corn stover into furfural, a promising approach was proposed employing a novel heterogeneous strong acid catalyst (SC-CaC t -700) in different solvents. The novel catalyst was characterized by elemental analysis, N 2 adsorption-desorption, FT-IR, XPS, TEM and SEM. The developed catalytic system demonstrated superior efficacy for furfural production from raw corn stover. The effects of reaction temperature, residence time, catalyst loading, substrate concentration and solvent were investigated and optimized. 93% furfural yield was obtained from 150mg corn stover at 200°C in 100min using 45mg catalyst in γ-valerolactone (GVL). In comparison, 51.5% furfural yield was achieved in aqueous media under the same conditions (200°C, 5h, and 45mg catalyst), which is of great industrial interest. Furfural was obtained from both hemicelluloses and cellulose in corn stover, which demonstrated a promising routine to make the full use of biomass. Copyright © 2017 Elsevier Ltd. All rights reserved.

Production of furfural from agricultural wastes by using pressurized water in a bath reactor

Energy Technology Data Exchange (ETDEWEB)

Sharma, D.K.; Sahgal, P.N.

1982-01-01

Agricultural wastes such as rice husks and sawdust can be used for the manufacture of chemicals including furfural and acetic acid. In the present work the conventional use of superheated steam has been replaced by the use of superheated water in the acidic hydrolysis of rice husks and sawdust. Comparable yields of furfural have been obtained by using superheated water in place of superheated steam in the same temperature and pressure range. This is an attempt to economize the heat requirement and reduce the cost of production of furfural. (Refs. 19).

Quantum Dynamics in the HMF Model

Science.gov (United States)

Plestid, Ryan; O'Dell, Duncan

2017-04-01

The Hamiltonian Mean Field (HMF) model represents a paradigm in the study of long-range interactions but has never been realized in a lab. Recently Shutz and Morigi (PRL 113) have come close but ultimately fallen short. Their proposal relied on cavity-induced interactions between atoms. If a design using cold atoms is to be successful, an understanding of quantum effects is essential. I will outline the natural quantum generalization of the HMF assuming a BEC by using a generalized Gross-Pitaevskii equation (gGPE). I will show how quantum effects modify features which are well understood in the classical model. More specifically, by working in the semi-classical regime (strong interparticle interactions) we can identify the universal features predicted by catastrophe theory dressed with quantum interference effects. The stationary states of gGPE can be solved exactly and are found to be described by self-consistent Mathieu functions. Finally, I will discuss the connection between the classical description of the dynamics in terms of the Vlassov equation, and the gGPE. We would like to thank the Government of Ontario's OGS program, NSERC, and the Perimeter Institute of Theoretical Physics.

DETERMINAÇÃO ESPECTROFOTOMÉTRICA DE WPNI E HMF EM LEITE UHT ATRAVÉS DA ANÁLISE POR COMPONENTES PRINCIPAIS

Directory of Open Access Journals (Sweden)

Leandra N. O. Neves

2016-07-01

Full Text Available During heat treatment milk suffers changes among which whey proteins insolubility and Maillard reaction can be monitored using spectrophotometric methods by determining the whey protein nitrogen (WPNI and 5-hydroxymethylfurfural (HMF. The aim of this work was the evaluation of heat treatment in commercial UHT milk samples through HMF and WPNI determination by spectrophotometric methods in visible region, using chemometric tools in data analysis. The regression models were fitted and statistical assumptions were tested. The WPNI confidence interval (CI was (0.91; 3.73 mg mL-1 showing the heat treatment severity and classifying the samples as "medium heat treatment" according to American Dairy Products Association. For free HMF index, the CI were: (2.39; 3.27 and (6.01; 6.89 µmol L-1 for regular and low lactose content samples, respectively; while these two samples group presented CI of (11.67; 12.39 and (132.28; 143.22 µmol L-1 for total HMF index, respectively; showing the influence of lactose content in total HMF index. Descriptive statistical analysis associated with principal component analysis demonstrated a lack of standardization in the current Brazilian UHT process. The spectrophotometric methods allowed obtaining further inferences about the product quality associated to its heat treatment.

Low energy electron transport in furfural

International Nuclear Information System (INIS)

Lozano, A.I.; Garcia, G.; Krupa, K.; Ferreira da Silva, F.; Limao-Vieira, P.; Blanco, F.; Munoz, A.; Jones, D.B.; Brunger, M.J.

2017-01-01

The cyclic configuration of the furfural molecule is similar to the 5-membered ring structure constituting the sugar units of the DNA helix, hence its importance in biology. In this paper, we report on an initial investigation into the transport of electrons through a gas cell containing 1 mtorr of gaseous furfural. Results from our Monte Carlo simulation are implicitly checked against those from a corresponding electron transmission measurement. To enable this simulation a self-consistent cross section data base was constructed. This data base is benchmarked through new total cross section measurements which are also described here. In addition, again to facilitate the simulation, our preferred energy loss distribution function is presented and discussed

Manufacture of furfural from logging wastes

Energy Technology Data Exchange (ETDEWEB)

Kul' kevits, Y.A.; Pugulis, M.O.; Daugavietis, M.O.; Zavylavov, V.A.; Butsena, A.Y.

1980-01-01

A pilot plant has been built at the Kalsnava forest experiment station in Latvia to convert chips of low-value broadleaves (birch, aspen, alder etc.), especially from branchwood into furfural (obtainable from bark as well as from wood). The process (patented) and flow line are described. Furfural is obtained in 6.8-7.6% yield on total DM by low-temperature pyrolysis 210-220 degrees Centigrade. A prototype factory of 1000 tons raw furfural capacity is proposed.

Furfural - from biomass to organic chemistry laboratory

International Nuclear Information System (INIS)

Ribeiro, Paulo Roberto; Carvalho, Jose Roque Mota; Geris, Regina; Queiroz, Vinicius; Fascio, Miguel

2012-01-01

The goal of this manuscript is provide to students of Chemistry and related areas an alternative experiment in which they can obtain a compound and learn to observe and interpret properties and predict organic structure by obtaining furfural from biomass. Furfural is an organic compound, obtained through acid hydrolysis of pentosans, commonly used in the chemical and pharmaceutical industries. Students are guided to get furfural through extractive procedures and chemical reactions adapted to semi-micro laboratory scale. Characterization of furfural was done by chemical tests and physical properties. Identification was accomplished by a series of spectroscopic and spectrometric techniques. (author)

Lyoluminescence of tris (hydroxymethyl) aminomethane in gamma dosimetry

International Nuclear Information System (INIS)

Azorin, J.; Gutierrez, A.; Guadarrama, L.

1986-01-01

Gamma dosimetry using lyoluminescence (LL) has advantages over other conventional systems because of its low cost and simplicity of use. Results of the investigation of the LL properties of tris (hydroxymethyl) aminomethane irradiated with 60 Co gamma radiation are presented and compared with the results of the LL of mannose and sucrose. Tris on dissolution in luminol shows a higher LL response than that of mannose and lower than that of sucrose, and has the highest stability of the three systems. The LL response of tris was linear in the range 5 Gy to 1kGy and showed no fading during one week. A comparison with the results of other authors as well as with measurements by ESR techniques are also reported. From these results we conclude that tris (hydroxymethyl) aminomethane on dissolution in luminol provides a LL dosimetric system useful for gamma dosimetry in the radiation processing of foods. (author)

Comparison of ionospheric F2 peak parameters foF2 and hmF2 with IRI2001 at Hainan

Science.gov (United States)

Wang, X.; Shi, J. K.; Wang, G. J.; Gong, Y.

2009-06-01

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with quarter-hourly time interval resolution for the diurnal variation, obtained with DPS4 digisonde at Hainan (19.5°N, 109.1°E; Geomagnetic coordinates: 178.95°E, 8.1°N) are used to investigate the low-latitude ionospheric variations and comparisons with the International Reference Ionosphere (IRI) model predictions. The data used for the present study covers the period from February 2002 to April 2007, which is characterized by a wide range of solar activity, ranging from high solar activity (2002) to low solar activity (2007). The results show that (1) Generally, IRI predictions follow well the diurnal and seasonal variation patterns of the experimental values of foF2, especially in the summer of 2002. However, there are systematic deviation between experimental values and IRI predictions with either CCIR or URSI coefficients. Generally IRI model greatly underestimate the values of foF2 from about noon to sunrise of next day, especially in the afternoon, and slightly overestimate them from sunrise to about noon. It seems that there are bigger deviations between IRI Model predictions and the experimental observations for the moderate solar activity. (2) Generally the IRI-predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the experimental results, but there is a relatively good agreement in summer at low solar activity. The deviation between the IRI-predicted hmF2 using CCIR M(3000)F2 and observed hmF2 is bigger from noon to sunset and around sunrise especially at high solar activity. The occurrence time of hmF2 peak (about 1200 LT) of the IRI model predictions is earlier than that of observations (around 1500 LT). The agreement between the IRI hmF2 obtained with the measured M(3000)F2 and the observed hmF2 is very good except that IRI overestimates slightly hmF2 in the daytime in summer at high solar activity and underestimates it in the nighttime with lower values near

[Furfural degradation by filamentous fungus Amorphotheca resinae ZN1].

Science.gov (United States)

Wang, Xiaofeng; Zhang, Jian; Xin, Xiujuan; Bao, Jie

2012-09-01

Some degradation products from lignocellulose pretreatment strongly inhibit the activities of cellulolytic enzymes and ethanol fermentation strains, thus the efficient removal of the inhibitor substances ("detoxification") is the inevitable step for the biotransformation processes. In this study, the biological detoxification of furfural by a newly isolated fungus, Amorphotheca resinae ZN1, was studied and the metabolic pathways of furfural degradation was analyzed. The metabolic pathway of furfural degradation in A. resinae ZN1 was described as follows: first, furfural was quickly converted into the low toxic furfuryl alcohol; then the furfuryl alcohol was gradually converted into furfural again but under the low concentration under aerobic condition, which was not lethal to the growth of the fungi; furfural continued to be oxidized to furoic acid by A. resinae ZN1. It is likely that furoic acid was further degraded in the TCA cycle to complete the biological degradation of furfural. The present study provided the important experimental basis for speeding up the biodetoxification of furfural by A. resinae ZN1 and the rate-limiting step in the lignocellulose biotransformation to ethanol.

Regeneration of furfural on activated carbon with methanol; Furufuraru kyuchakutan no metanoru ni yoru saisei

Energy Technology Data Exchange (ETDEWEB)

Sudo, Y. [Tokyo National College of Technology, Tokyo (Japan); Suzuki, M. [Tokyo Univ. (Japan). Inst. of Industrial Science

1998-03-01

Experiments of regenerating solvent from activated carbon are performed using furfural (1-phenyl-2-propane) as the absorbent and methanol as the solvent for regeneration. In 5 repeated adsorption-desorption cycles, the solvent becomes in dynamic stationary state after the second cycle with about 10% not desorption yet, and it is found that considerable number of repetition of furfural adsorbed carbon regeneration is possible by the use of methanol. The overall mass transfer coefficient of furfural and methanol in desorption is calculated. In addition, an experiment is carried out changing the adsorption ratio of furfural and the flow velocity of methanol to investigate desorption mechanism of furfural adsorbed carbon. Larger difference of adsorption equilibrium of furfural in aqueous solution and in methanol is efficient in desorption of furfural adsorbed carbon by methanol, but it is found that desorption rate is affected by mixed diffusion in the column and the surface diffusion is dominant in particles. 17 refs., 10 figs.

Anti-inflammatory effects of enzyme-treated asparagus extract and its constituents in hepatocytes

Directory of Open Access Journals (Sweden)

Mikio Nishizawa

2016-02-01

Full Text Available Background:Asparagus (Asparagus officinalisL. is one of the most ancient vegetablesin the world, andis rich in asparagine. Enzyme-treated asparagus extract (ETAS™; Amino Up Chemical Co., Ltd., Sapporo, Japan is the final product of enzyme-treatment of asparagus stems and subsequent extraction. Two constituents were purified from ETAS and identified: 5-hydroxymethyl-2-furfural (HMF, an abundant constituent, and (S-asfural, a novel constituent, which is a derivative of HMF. ETAS has been reported to increase the expression of heat shock proteins (HSPs, which are essential for the repair or removal of defective proteins. The expression of Hspfamily genes is regulated by the transcription factor heat shock factor 1 (HSF1. It is unknown whether ETAS and its constituents elicit anti-inflammatory effects, such as the suppression of nitric oxide (NO, an inflammatory mediator synthesized by inducible nitric oxide synthase (iNOS in interleukin (IL-1β-treated hepatocytes. Objective:To examine the anti-inflammatory effects of ETAS, we treated rat hepatocytes with ETAS, or its constituents (S-asfural or HMF, and IL-1β, beforethen analyzingthe expression of the iNOSgene and other genes involved in inflammation.Methods:Primary cultured rat hepatocytes were prepared by collagenase perfusion. ETAS, (S-asfural, or HMF was added to the medium with IL-1β and incubated at 37 °C. When necessary, an inhibitor of HSF1 was added. NO in the medium was measured by the Griess method, and the half-maximal inhibitory concentration (IC50 values were determined. To analyze the mRNA expression, a reverse transcription-quantitative polymerase chain reaction was performed. Antibody arrays were used to determine the levels of cytokines and chemokines in the medium.Results:ETAS suppressed NO production in IL-1β-treated hepatocytes without causing cytotoxicity. ETAS decreased the levels of both iNOS mRNA and the antisense transcript, whereas it increased the levels of Hsf1 m

Role of Brønsted acid in selective production of furfural in biomass pyrolysis.

Science.gov (United States)

Zhang, Haiyan; Liu, Xuejun; Lu, Meizhen; Hu, Xinyue; Lu, Leigang; Tian, Xiaoning; Ji, Jianbing

2014-10-01

In this work, the role of Brønsted acid for furfural production in biomass pyrolysis on supported sulfates catalysts was investigated. The introduction of Brønsted acid was shown to improve the degradation of polysaccharides to intermediates for furfural, which did not work well when only Lewis acids were used in the process. Experimental results showed that CuSO4/HZSM-5 catalyst exhibited the best performance for furfural (28% yield), which was much higher than individual HZSM-5 (5%) and CuSO4 (6%). The optimum reaction conditions called for the mass ratio of CuSO4/HZSM-5 to be 0.4 and the catalyst/biomass mass ratio to be 0.5. The recycled catalyst exhibited low productivity (9%). Analysis of the catalysts by Py-IR revealed that the CuSO4/HZSM-5 owned a stronger Brønsted acid intensity than HZSM-5 or the recycled CuSO4/HZSM-5. Therefore, the existence of Brønsted acid is necessary to achieve a more productive degradation of biomass for furfural. Copyright © 2014 Elsevier Ltd. All rights reserved.

Integrated furfural and first generation bioethanol production: process simulation and techno-economic analysis

Directory of Open Access Journals (Sweden)

J. F. L. Silva

Full Text Available Abstract Furfural is a base chemical with a wide range of applications and with a great opportunity for market growth in the near term. Derived from biomass, its production may be incorporated to the Brazilian chemical industry using sugarcane bagasse as feedstock. In this context, the integration of a furfural plant to a first generation bioethanol facility, within the biorefinery concept, was simulated considering different scenarios compared to an autonomous bioethanol distillery. The economic analysis of the different scenarios showed that the revenues from furfural commercialization increase the internal rate of return of the project for maximum furfural production (22.0% in comparison to a conventional ethanol distillery (13.5%, despite the decrease in electricity output. Moreover, the economic analysis of the results pointed out the possibility of lowering furfural prices to levels that could lead to its use as a precursor for biofuels.

Electrochemical and photoelectrochemical reduction of furfurals

Energy Technology Data Exchange (ETDEWEB)

Choi, Kyoung-Shin; Roylance, John James; Kubota, Stephen R.

2018-02-06

Electrochemical cells and photoelectrochemical cells for the reduction of furfurals are provided. Also provided are methods of using the cells to carry out the reduction reactions. Using the cells and methods, furfurals can be converted into furan alcohols or linear ketones.

Quality of Water Content, Diastase Enzyme Activity and Hidroximetilfurfural (HMF in Rubber and Rambutan Honey

Directory of Open Access Journals (Sweden)

Sulis Setio Toto Harjo

2017-03-01

Full Text Available The purpose of this research was to determine the water content, diastase enzyme activity and HMF of the rubber and rambutan honey. The method was a laboratory experiments with statistical analysis unpaired student t-test by two treatments and fifteen replications. The variable of this research were water content, diastase enzyme activity and HMF. The results of rubber and rambutan honey showed that there were significant difference effect (P0.05 that is 11 DN and there is a highly significant difference (P<0.01 on the HMF content of 17.23±0.54 mg/kg and 7.61±0.23 mg/kg. Rubber and rambutan honey have good quality based on the water content, diastase enzyme activity and HMF. It was concluded that the rubber and rambutan honey used were of good quality because it has met the requirements of SNI.

Silencing of NADPH-Dependent Oxidoreductase Genes (yqhD and dkgA) in Furfural-Resistant Ethanologenic Escherichia coli▿

Science.gov (United States)

Miller, E. N.; Jarboe, L. R.; Yomano, L. P.; York, S. W.; Shanmugam, K. T.; Ingram, L. O.

2009-01-01

Low concentrations of furfural are formed as a side product during the dilute acid hydrolysis of hemicellulose. Growth is inhibited by exposure to furfural but resumes after the complete reduction of furfural to the less toxic furfuryl alcohol. Growth-based selection was used to isolate a furfural-resistant mutant of ethanologenic Escherichia coli LY180, designated strain EMFR9. Based on mRNA expression levels in the parent and mutant in response to furfural challenge, genes encoding 12 oxidoreductases were found to vary by more than twofold (eight were higher in EMFR9; four were higher in the parent). All 12 genes were cloned. When expressed from plasmids, none of the eight genes in the first group increased furfural tolerance in the parent (LY180). Expression of three of the silenced genes (yqhD, dkgA, and yqfA) in EMFR9 was found to decrease furfural tolerance compared to that in the parent. Purified enzymes encoded by yqhD and dkgA were shown to have NADPH-dependent furfural reductase activity. Both exhibited low Km values for NADPH (8 μM and 23 μM, respectively), similar to those of biosynthetic reactions. Furfural reductase activity was not associated with yqfA. Deleting yqhD and dkgA in the parent (LY180) increased furfural tolerance, but not to the same extent observed in the mutant EMFR9. Together, these results suggest that the process of reducing furfural by using an enzyme with a low Km for NADPH rather than a direct inhibitory action is the primary cause for growth inhibition by low concentrations of furfural. PMID:19429550

Inhibitor tolerance of a recombinant flocculating industrial Saccharomyces cerevisiae strain during glucose and xylose co-fermentation

Directory of Open Access Journals (Sweden)

Yun-Cheng Li

Full Text Available ABSTRACT Lignocellulose-derived inhibitors have negative effects on the ethanol fermentation capacity of Saccharomyces cerevisiae. In this study, the effects of eight typical inhibitors, including weak acids, furans, and phenols, on glucose and xylose co-fermentation of the recombinant xylose-fermenting flocculating industrial S. cerevisiae strain NAPX37 were evaluated by batch fermentation. Inhibition on glucose fermentation, not that on xylose fermentation, correlated with delayed cell growth. The weak acids and the phenols showed additive effects. The effect of inhibitors on glucose fermentation was as follows (from strongest to weakest: vanillin > phenol > syringaldehyde > 5-HMF > furfural > levulinic acid > acetic acid > formic acid. The effect of inhibitors on xylose fermentation was as follows (from strongest to weakest: phenol > vanillin > syringaldehyde > furfural > 5-HMF > formic acid > levulinic acid > acetic acid. The NAPX37 strain showed substantial tolerance to typical inhibitors and showed good fermentation characteristics, when a medium with inhibitor cocktail or rape straw hydrolysate was used. This research provides important clues for inhibitors tolerance of recombinant industrial xylose-fermenting S. cerevisiae.

Stereochemistry of Furfural Reduction by a Saccharomyces cerevisiae Aldehyde Reductase That Contributes to In Situ Furfural Detoxification

Science.gov (United States)

Ari1p from Saccharomyces cerevisiae, recently identified as an intermediate subclass short-chain dehydrogenase/reductase, contributes in situ to the detoxification of furfural. Furfural inhibits efficient ethanol production by the yeast, particularly when the carbon source is acid-treated lignocell...

Catalytic Upgrading of 5-Hydroxymethylfurfural to Drop-in Biofuels by Solid Base and Bifunctional Metal-Acid Catalysts.

Science.gov (United States)

Bohre, Ashish; Saha, Basudeb; Abu-Omar, Mahdi M

2015-12-07

Design and synthesis of effective heterogeneous catalysts for the conversion of biomass intermediates into long chain hydrocarbon precursors and their subsequent deoxygenation to hydrocarbons is a viable strategy for upgrading lignocellulose into distillate range drop-in biofuels. Herein, we report a two-step process for upgrading 5-hydroxymethylfurfural (HMF) to C9 and C11 fuels with high yield and selectivity. The first step involves aldol condensation of HMF and acetone with a water tolerant solid base catalyst, zirconium carbonate (Zr(CO3 )x ), which gave 92 % C9 -aldol product with high selectivity at nearly 100 % HMF conversion. The as-synthesised Zr(CO3 )x was analysed by several analytical methods for elucidating its structural properties. Recyclability studies of Zr(CO3 )x revealed a negligible loss of its activity after five consecutive cycles over 120 h of operation. Isolated aldol product from the first step was hydrodeoxygenated with a bifunctional Pd/Zeolite-β catalyst in ethanol, which showed quantitative conversion of the aldol product to n-nonane and 1-ethoxynonane with 40 and 56 % selectivity, respectively. 1-Ethoxynonane, a low oxygenate diesel range fuel, which we report for the first time in this paper, is believed to form through etherification of the hydroxymethyl group of the aldol product with ethanol followed by opening of the furan ring and hydrodeoxygenation of the ether intermediate. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Biorefining compounds and organocatalytic upgrading methods

Science.gov (United States)

Chen, Eugene Y.; Liu, Dajiang

2016-10-18

The invention provides new methods for the direct umpolung self-condensation of 5-hydroxymethylfurfural (HMF) by organocatalysis, thereby upgrading the readily available substrate into 5,5'-di(hydroxymethyl)furoin (DHMF). While many efficient catalyst systems have been developed for conversion of plant biomass resources into HMF, the invention now provides methods to convert such nonfood biomass directly into DHMF by a simple process as described herein. The invention also provides highly effective new methods for upgrading other biomass furaldehydes and related compound to liquid fuels. The methods include the organocatalytic self-condensation (umpolung) of biomass furaldehydes into (C.sub.8-C.sub.12)furoin intermediates, followed by hydrogenation, etherification or esterification into oxygenated biodiesel, or hydrodeoxygenation by metal-acid tandem catalysis into premium hydrocarbon fuels.

Biorefining compounds and organocatalytic upgrading methods

Energy Technology Data Exchange (ETDEWEB)

Chen, Eugene Y.; Liu, Dajiang

2017-11-28

The invention provides new methods for the direct umpolung self-condensation of 5-hydroxymethylfurfural (HMF) by organocatalysis, thereby upgrading the readily available substrate into 5,5'-di(hydroxymethyl) furoin (DHMF). While many efficient catalyst systems have been developed for conversion of plant biomass resources into HMF, the invention now provides methods to convert such nonfood biomass directly into DHMF by a simple process as described herein. The invention also provides highly effective new methods for upgrading other biomass furaldehydes and related compound to liquid fuels. The methods include the organocatalytic self-condensation (umpolung) of biomass furaldehydes into (C.sub.8-C.sub.12)furoin intermediates, followed by hydrogenation, etherification or esterification into oxygenated biodiesel, or hydrodeoxygenation by metal-acid tandem catalysis into premium hydrocarbon fuels.

Process for producing furan from furfural aldehyde

Science.gov (United States)

Diebold, J.P.; Evans, R.J.

1987-04-06

A process of producing furan and derivatives thereof as disclosed. The process includes generating furfural aldehyde vapors and then passing those vapors over a zeolite catalyst at a temperature and for a residence time effective to decarbonylate the furfural aldehydes to form furans and derivatives thereof. The resultant furan vapors and derivatives are then separated. In a preferred form, the furfural aldehyde vapors are generated during the process of converting biomass materials to liquid and gaseous fuels.

Process for producing furan from furfural aldehyde

Science.gov (United States)

Diebold, James P.; Evans, Robert J.

1988-01-01

A process of producing furan and derivatives thereof is disclosed. The process includes generating furfural aldehyde vapors and then passing those vapors over a zeolite catalyst at a temperature and for a residence time effective to decarbonylate the furfural aldehydes to form furans and derivatives thereof. The resultant furan vapors and derivatives are then separated. In a preferred form, the furfural aldehyde vapors are generated during the process of converting biomass materials to liquid and gaseous fuels.

Polyamine transporters and polyamines increase furfural tolerance during xylose fermentation with ethanologenic Escherichia coli strain LY180.

Science.gov (United States)

Geddes, Ryan D; Wang, Xuan; Yomano, Lorraine P; Miller, Elliot N; Zheng, Huabao; Shanmugam, Keelnatham T; Ingram, Lonnie O

2014-10-01

Expression of genes encoding polyamine transporters from plasmids and polyamine supplements increased furfural tolerance (growth and ethanol production) in ethanologenic Escherichia coli LY180 (in AM1 mineral salts medium containing xylose). This represents a new approach to increase furfural tolerance and may be useful for other organisms. Microarray comparisons of two furfural-resistant mutants (EMFR9 and EMFR35) provided initial evidence for the importance of polyamine transporters. Each mutant contained a single polyamine transporter gene that was upregulated over 100-fold (microarrays) compared to that in the parent LY180, as well as a mutation that silenced the expression of yqhD. Based on these genetic changes, furfural tolerance was substantially reconstructed in the parent, LY180. Deletion of potE in EMFR9 lowered furfural tolerance to that of the parent. Deletion of potE and puuP in LY180 also decreased furfural tolerance, indicating functional importance of the native genes. Of the 8 polyamine transporters (18 genes) cloned and tested, half were beneficial for furfural tolerance (PotE, PuuP, PlaP, and PotABCD). Supplementing AM1 mineral salts medium with individual polyamines (agmatine, putrescine, and cadaverine) also increased furfural tolerance but to a smaller extent. In pH-controlled fermentations, polyamine transporter plasmids were shown to promote the metabolism of furfural and substantially reduce the time required to complete xylose fermentation. This increase in furfural tolerance is proposed to result from polyamine binding to negatively charged cellular constituents such as nucleic acids and phospholipids, providing protection from damage by furfural. Copyright © 2014, American Society for Microbiology. All Rights Reserved.

Techno-economic assessment of hybrid extraction and distillation processes for furfural production from lignocellulosic biomass.

Science.gov (United States)

Nhien, Le Cao; Long, Nguyen Van Duc; Kim, Sangyong; Lee, Moonyong

2017-01-01

Lignocellulosic biomass is one of the most promising alternatives for replacing mineral resources to overcome global warming, which has become the most important environmental issue in recent years. Furfural was listed by the National Renewable Energy Laboratory as one of the top 30 potential chemicals arising from biomass. However, the current production of furfural is energy intensive and uses inefficient technology. Thus, a hybrid purification process that combines extraction and distillation to produce furfural from lignocellulosic biomass was considered and investigated in detail to improve the process efficiency. This effective hybrid process depends on the extracting solvent, which was selected based on a comprehensive procedure that ranged from solvent screening to complete process design. Various solvents were first evaluated in terms of their extraction ability. Then, the most promising solvents were selected to study the separation feasibility. Eventually, processes that used the three best solvents (toluene, benzene, and butyl chloride) were designed and optimized in detail using Aspen Plus. Sustainability analysis was performed to evaluate these processes in terms of their energy requirements, total annual costs (TAC), and carbon dioxide (CO 2 ) emissions. The results showed that butyl chloride was the most suitable solvent for the hybrid furfural process because it could save 44.7% of the TAC while reducing the CO 2 emissions by 45.5% compared to the toluene process. In comparison with the traditional purification process using distillation, this suggested hybrid extraction/distillation process can save up to 19.2% of the TAC and reduce 58.3% total annual CO 2 emissions. Furthermore, a sensitivity analysis of the feed composition and its effect on the performance of the proposed hybrid system was conducted. Butyl chloride was found to be the most suitable solvent for the hybrid extraction/distillation process of furfural production. The proposed

Production of furfural from rice straw by microbial treatment. (II). Production of furfural from xylose by acid treatment

Energy Technology Data Exchange (ETDEWEB)

Kim, W.S.; Yoo, I.S.; Kang, S.K.

1984-01-01

The reaction conditions and mechanism of furfural production from xylose by acid treatment were studied. The xylose was obtained from rice straw. Furfural yield at batch-isothermal conditions was a function of initial xylose concentration H2SO4 concentration, reaction temperature and reaction time. And when the initial xylose concentration was low, the results were consistent with those of Root's reaction mechanism. Maximum furfural yield was obtained under conditions of H2SO4 concentration 0.2N, initial xylose concentration 0.0067 M, temperature 200 degrees, and reaction time 10 min.

Catalytic subcritical water liquefaction of flax straw for high yield of furfural

International Nuclear Information System (INIS)

Harry, Inibehe; Ibrahim, Hussameldin; Thring, Ron; Idem, Raphael

2014-01-01

There is substantial interest in the application of biomass as a renewable fuel or for production of chemicals. Flax straw can be converted into valuable chemicals and biofuels via liquefaction in sub-critical water. In this study, the yield of furfural and the kinetics of flax straw liquefaction under sub-critical water conditions were investigated using a high-pressure autoclave reactor. The liquefaction was conducted in the temperature range of 175–325 °C, pressure of 0.1 MPa–8 MPa, retention time in the range of 0 min–120 min, and flax straw mass fraction (w F ) of 5–20 %. Also, the effect of acid catalysts on furfural yield was studied. The kinetic parameters of flax straw liquefaction were determined using nonlinear regression of the experimental data, assuming second-order kinetics. The apparent activation energy was found to be 27.97 kJ mol −1 while the reaction order was 2.0. The optimum condition for furfural yield was at 250 °C, 6.0 MPa, w F of 5% and 0 retention time after reaching set conditions. An acid catalyst was found to selectively favour furfural yield with 40% flax straw conversion. - Highlights: • Flax straw liquefaction in subcritical water. • Creation of a reaction pathway that can be used to optimized furfural production. • Acid catalyst selectively favoured furfural yield with respect to other liquid products. • At the highest process temperature of 325 °C, a carbon conversion of 40% was achieved. • Activation energy and reaction order was 28 kJ/mol and 2.0 respectively

Furfural Inhibits Growth by Limiting Sulfur Assimilation in Ethanologenic Escherichia coli Strain LY180▿

Science.gov (United States)

Miller, Elliot N.; Jarboe, Laura R.; Turner, Peter C.; Pharkya, Priti; Yomano, Lorraine P.; York, Sean W.; Nunn, David; Shanmugam, K. T.; Ingram, Lonnie O.

2009-01-01

A wide variety of commercial products can be potentially made from monomeric sugars produced by the dilute acid hydrolysis of lignocellulosic biomass. However, this process is accompanied by side products such as furfural that hinder microbial growth and fermentation. To investigate the mechanism of furfural inhibition, mRNA microarrays of an ethanologenic strain of Escherichia coli (LY180) were compared immediately prior to and 15 min after a moderate furfural challenge. Expression of genes and regulators associated with the biosynthesis of cysteine and methionine was increased by furfural, consistent with a limitation of these critical metabolites. This was in contrast to a general stringent response and decreased expression of many other biosynthetic genes. Of the 20 amino acids individually tested as supplements (100 μM each), cysteine and methionine were the most effective in increasing furfural tolerance with serine (precursor of cysteine), histidine, and arginine of lesser benefit. Supplementation with other reduced sulfur sources such as d-cysteine and thiosulfate also increased furfural tolerance. In contrast, supplementation with taurine, a sulfur source that requires 3 molecules of NADPH for sulfur assimilation, was of no benefit. Furfural tolerance was also increased by inserting a plasmid encoding pntAB, a cytoplasmic NADH/NADPH transhydrogenase. Based on these results, a model is proposed for the inhibition of growth in which the reduction of furfural by YqhD, an enzyme with a low Km for NADPH, depletes NADPH sufficiently to limit the assimilation of sulfur into amino acids (cysteine and methionine) by CysIJ (sulfite reductase). PMID:19684179

Increase in furfural tolerance in ethanologenic Escherichia coli LY180 by plasmid-based expression of thyA.

Science.gov (United States)

Zheng, Huabao; Wang, Xuan; Yomano, Lorraine P; Shanmugam, Keelnatham T; Ingram, Lonnie O

2012-06-01

Furfural is an inhibitory side product formed during the depolymerization of hemicellulose by mineral acids. Genomic libraries from three different bacteria (Bacillus subtilis YB886, Escherichia coli NC3, and Zymomonas mobilis CP4) were screened for genes that conferred furfural resistance on plates. Beneficial plasmids containing the thyA gene (coding for thymidylate synthase) were recovered from all three organisms. Expression of this key gene in the de novo pathway for dTMP biosynthesis improved furfural resistance on plates and during fermentation. A similar benefit was observed by supplementation with thymine, thymidine, or the combination of tetrahydrofolate and serine (precursors for 5,10-methylenetetrahydrofolate, the methyl donor for ThyA). Supplementation with deoxyuridine provided a small benefit, and deoxyribose was of no benefit for furfural tolerance. A combination of thymidine and plasmid expression of thyA was no more effective than either alone. Together, these results demonstrate that furfural tolerance is increased by approaches that increase the supply of pyrimidine deoxyribonucleotides. However, ThyA activity was not directly affected by the addition of furfural. Furfural has been previously shown to damage DNA in E. coli and to activate a cellular response to oxidative damage in yeast. The added burden of repairing furfural-damaged DNA in E. coli would be expected to increase the cellular requirement for dTMP. Increased expression of thyA (E. coli, B. subtilis, or Z. mobilis), supplementation of cultures with thymidine, and supplementation with precursors for 5,10-methylenetetrahydrofolate (methyl donor) are each proposed to increase furfural tolerance by increasing the availability of dTMP for DNA repair.

Characterization and Application of Urea-Formaldehyde-Furfural Co-condensed Resins as Wood Adhesives

Directory of Open Access Journals (Sweden)

Jizhi Zhang

2014-08-01

Full Text Available Furfural, as an organic compound derived from biomass materials, was used to partially substitute for formaldehyde in the synthesis of UF resin. Urea-formaldehyde-furfural co-condensed (UFFR resins with different substitute ratios of furfural to formaldehyde (FR/F were prepared. The effects of the FR/F substitute ratio on the performances of UFFR resins were investigated. Matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF-MS and Fourier transform infrared spectroscopy (FT-IR were applied to characterize the chemical structures of UFFR resins. Plywood bonded by these resins was manufactured, and its bond strength and formaldehyde emission were measured. The results showed that the substitution of furfural in place of formaldehyde could reduce the free formaldehyde content effectively at the expense of prolongation of the curing time. The spectra of MALDI-TOF and FTIR confirmed the co-condensation of urea-formaldehyde-furfural both in uncured and cured resins. Plywood prepared under optimized parameters could yield high bond strength and low formaldehyde emission, which were 0.84 MPa and 0.23 ppm, respectively. The optimized parameters were as follows: a FR/F substitute ratio of 1/3; 1% (NH42S2O8 as the curing agent; and a hot pressing temperature of 130 °C. Hence, it is feasible to substitute partially formaldehyde by furfural to prepare UFFR resins as wood adhesives for plywood.

The potential of residues of furfural and biogas as calcareous soil amendments for corn seed production.

Science.gov (United States)

Zhao, Yunchen; Yan, Zhibin; Qin, Jiahai; Ma, Zhijun; Zhang, Youfu; Zhang, Li

2016-04-01

Intensive corn seed production in Northwest of China produced large amounts of furfural residues, which represents higher treatment cost and environmental issue. The broad calcareous soils in the Northwest of China exhibit low organic matter content and high pH, which led to lower fertility and lower productivity. Recycling furfural residues as soil organic and nutrient amendment might be a promising agricultural practice to calcareous soils. A 3-year field study was conducted to evaluate the effects of furfural as a soil amendment on corn seed production on calcareous soil with compared to biogas residues. Soil physical-chemical properties, soil enzyme activities, and soil heavy metal concentrations were assessed in the last year after the last application. Corn yield was determined in each year. Furfural residue amendments significantly decreased soil pH and soil bulk density. Furfural residues combined with commercial fertilizers resulted in the greater cumulative on soil organic matter, total phosphorus, available phosphorus, available potassium, and cation exchange capacity than that of biogas residue. Simultaneously, urease, invertase, catalase, and alkaline phosphatase increased even at the higher furfural application rates. Maize seed yield increased even with lower furfural residue application rates. Furfural residues resulted in lower Zn concentration and higher Cd concentration than that of biogas residues. Amendment of furfural residues led to higher soil electrical conductivity (EC) than that of biogas residues. The addition of furfural residues to maize seed production may be considered to be a good strategy for recycling the waste, converting it into a potential resource as organic amendment in arid and semi-arid calcareous soils, and may help to reduce the use of mineral chemical fertilizers in these soils. However, the impact of its application on soil health needs to be established in long-term basis.

Fluorescent property of 3-hydroxymethyl imidazo[1,2-a]pyridine and pyrimidine derivatives

Directory of Open Access Journals (Sweden)

Velázquez-Olvera Stephania

2012-08-01

Full Text Available Abstract Background Imidazo[1,2-a]pyridines and pyrimidines are important organic fluorophores which have been investigated as biomarkers and photochemical sensors. The effect on the luminescent property by substituents in the heterocycle and phenyl rings, have been studied as well. In this investigation, series of 3-hydroxymethyl imidazo[1,2-a]pyridines and pyrimidines were synthesized and evaluated in relation to fluorescence emission, based upon the hypothesis that the hydroxymethyl group may act as an enhancer of fluorescence intensity. Results Compounds of both series emitted light in organic solvents dilutions as well as in acidic and alkaline media. Quantitative fluorescence spectroscopy determined that both fused heterocycles fluoresced more intensely than the parent unsubstituted imidazo[1,2-a]azine fluorophore. In particular, 3-hydroxymethyl imidazo[1,2-a]pyridines fluoresced more intensely than 3-hydroxymethyl imidazo[1,2-a]pyrimidines, the latter emitting blue light at longer wavelengths, whereas the former emitted purple light. Conclusion It was concluded that in most cases the hydroxymethyl moiety did act as an enhancer of the fluorescence intensity, however, a comparison made with the fluorescence emitted by 2-aryl imidazo[1,2-a]azines revealed that in some cases the hydroxymethyl substituent decreased the fluorescence intensity.

Model Study To Assess Softwood Hemicellulose Hydrolysates as the Carbon Source for PHB Production in Paraburkholderia sacchari IPT 101.

Science.gov (United States)

Dietrich, Karolin; Dumont, Marie-Josée; Schwinghamer, Timothy; Orsat, Valérie; Del Rio, Luis F

2018-01-08

Softwood hemicellulose hydrolysates are a cheap source of sugars that can be used as a feedstock to produce polyhydroxybutyrates (PHB), which are biobased and compostable bacterial polyesters. To assess the potential of the hemicellulosic sugars as a carbon source for PHB production, synthetic media containing softwood hemicellulose sugars (glucose, mannose, galactose, xylose, arabinose) and the potentially inhibitory lignocellulose degradation products (acetic acid, 5-hydroxymethylfurfural (HMF), furfural, and vanillin) were fermented with the model strain Paraburkholderia sacchari IPT 101. Relative to pure glucose, individual fermentation for 24 h with 20 g/L mannose or galactose exhibited maximum specific growth rates of 97% and 60%, respectively. On the other hand, with sugar mixtures of glucose, mannose, galactose, xylose, and arabinose, the strain converted all sugars simultaneously to reach a maximum PHB concentration of 5.72 g/L and 80.5% PHB after 51 h. The addition of the inhibitor mixture at the following concentration, sodium acetate (2.11 g/L), HMF (0.67 g/L), furfural (0.66 g/L), and vanillin (0.93 g/L), to the sugar mixture stopped the growth entirely within 24 h. Individually, the inhibitors either had no effect or only reduced growth. Moreover, it was found that a bacterial inoculum with high initial cell density (optical density, OD ≥ 5.6) could overcome the growth inhibition to yield an OD of 13 within 24 h. Therefore, softwood hemicellulose sugars are viable carbon sources for PHB production. Nevertheless, real softwood hemicellulose hydrolysates need detoxification or a high inoculum to overcome inhibitory effects and allow bacterial growth.

Biomass valorization: electrocatalytic transformations of furfural; Valorisation de la biomasse: transformations electrocatalytiques du furfural

Energy Technology Data Exchange (ETDEWEB)

Chamoulaud, G.

2000-12-15

The simultaneous synthesis of furfuryl alcohol and of furoic acid has been the subject of systematic studies of the electrochemical properties of furfural by the variation of the experimental parameters and the coupling to electrochemical and analytical techniques. With these ones, the reaction products have been identified, the kinetics of the reactions have been studied and their mechanisms understood. The study of the furfural electroreduction in aqueous medium shows that the nature of the cathode has a decisive effect on the reaction. The kinetic orientation depends on the value of the hydrogen overvoltage. On lead, (high overvoltage), the coupling reactions are favored. On platinum, (low overvoltage), the solvent decomposition is high and leads to weak faradic yields and conversion rates. On copper, (intermediary overvoltage), the optimization of the experimental parameters has allowed to find a compromise between the coupling reactions and the solvent decomposition. The conversion rates, the selectivities in furfuryl alcohol and the chemical yields are then of about 95%. For the electro-oxidation of the furfural into furoic acid, only the nickel electrode seems to be suitable. Indeed, on lead, the oxidation reactions lead to the opening of the furanic cycle and the copper anode becomes corroded. The improvement of the nickel stability and the increase of its active surface have allowed to obtain selectivities in furoic acid and chemical yields of near 100%. The XR analyses have shown that they are the -NiOOH oxides which are active. During this reaction, these oxides are reduced into -Ni(OH){sub 2} and regenerated into -NiOOH then by the applied potential. Then, the electro-synthesis of the furfuryl alcohol and the furoic acid has been carried out and the use of greater specific surface electrodes has allowed to obtain conversion rates of 70% and selectivities of near 90%. (O.M.)

Synthesis of Furfural from Water Hyacinth (Eichornia croassipes)

Science.gov (United States)

Ismiyarto; Ngadiwiyana; windarti, T.; Purbowatiningrum, RS; Hapsari, M.; Rafi'ah, FH; Suyanti; Haq, MS

2017-02-01

Furfural has been prepared from hydrolysis of dried biomass of water hyacinth (Eichornia crassipes) by using diluted hydrochloric acid and sulphuric acid as catalysts. This process involved the conversion of the pentosane fraction in water hyacinth into pentose, and then pentose was cyclodehydrated into furfural. The reaction was conducted in a distillation set with receiving the flask that contains chloroform. Furfural was identified by fehling test which was then characterized using Fourier Transform Infra Red (FTIR) and Proton Nuclear Magnetic Resonance (1H-NMR), followed by Gas Chromatography with Mass Spectroscopy (GC-MS). The yield of furfural obtained using sulphuric acid catalyst was 0.38% and hydrochloric acid catalyst was 0.01% of dried biomass.

Pre-treatment step with Leuconostoc mesenteroides or L. pseudomesenteroides strains removes furfural from Zymomonas mobilis ethanolic fermentation broth

Science.gov (United States)

Furfural (furan-2-carboxaldehyde), formed during dilute acid hydrolysis of biomass, is an inhibitor of growth and ethanol production by Zymomonas mobilis. The present study used a biological pre-treatment to reduce that amount of furfural in a model biofuel fermentation broth. The pre-treatment in...

Biodegradation of furfural by Bacillus subtilis strain DS3.

Science.gov (United States)

Zheng, Dan; Bao, Jianguo; Lu, Jueming; Lv, Quanxi

2015-07-01

An aerobic bacterial strain DS3, capable of growing on furfural as sole carbon source, was isolated from actived sludge of wastewater treatment plant in a diosgenin factory after enrichment. Based on morphological physiological tests as well as 16SrDNA sequence and Biolog analyses it was identified as Bacillus subtilis. The study revealed that strain DS3 utilized furfural, as analyzed by high-performance liquid chromatography (HPLC). Under following conditions: pH 8.0, temperature 35 degrees C, 150 rpm and 10% inoculum, strain DS3 showed 31.2% furfural degradation. Furthermore, DS3 strain was found to tolerate furfural concentration as high as 6000 mg(-1). The ability of Bacillus subtilis strain DS3 to degrade furfural has been demonstrated for the first time in the present study.

Steviamine, a new class of indolizidine alkaloid [(1R,2S,3R,5R,8aR-3-hydroxymethyl-5-methyloctahydroindolizine-1,2-diol hydrobromide

Directory of Open Access Journals (Sweden)

Amber L. Thompson

2009-11-01

Full Text Available X-ray crystallographic analysis of the title hydrobromide salt, C10H20N+·Br−, of (1R,2S,3R,5R,8aR-3-hydroxymethyl-5-methyloctahydroindolizine-1,2-diol defines the absolute and relative stereochemistry at the five chiral centres in steviamine, a new class of polyhydroxylated indolizidine alkaloid isolated from Stevia rebaudiana (Asteraceae leaves. In the crystal structure, molecules are linked by intermolecular O—H...Br and N—H...Br hydrogen bonds, forming double chains around the twofold screw axes along the b-axis direction. Intramolecular O—H...O interactions occur.

Factors Affecting Furfural as a Nematicide on Turf

OpenAIRE

Luc, J. E.; Crow, W. T.

2013-01-01

Recently a furfural nematicide Multiguard Protect EC was launched for use on turfgrasses in the United States. A series of greenhouse experiments were conducted to determine the concentration and exposure time required for this formulation to irreversibly affect Belonolaimus longicaudatus, and to study factors that might affect the practicality of furfural use in turfgrass systems. One experiment exposed B. longicaudatus to increasing concentrations of furfural (0 to 990 ppm) in vitro for eit...

Detoxification of furfural in Corynebacterium glutamicum under aerobic and anaerobic conditions.

Science.gov (United States)

Tsuge, Yota; Hori, Yoshimi; Kudou, Motonori; Ishii, Jun; Hasunuma, Tomohisa; Kondo, Akihiko

2014-10-01

The toxic fermentation inhibitors in lignocellulosic hydrolysates raise serious problems for the microbial production of fuels and chemicals. Furfural is considered to be one of the most toxic compounds among these inhibitors. Here, we describe the detoxification of furfural in Corynebacterium glutamicum ATCC13032 under both aerobic and anaerobic conditions. Under aerobic culture conditions, furfuryl alcohol and 2-furoic acid were produced as detoxification products of furfural. The ratio of the products varied depending on the initial furfural concentration. Neither furfuryl alcohol nor 2-furoic acid showed any toxic effect on cell growth, and both compounds were determined to be the end products of furfural degradation. Interestingly, unlike under aerobic conditions, most of the furfural was converted to furfuryl alcohol under anaerobic conditions, without affecting the glucose consumption rate. Both the NADH/NAD(+) and NADPH/NADP(+) ratio decreased in the accordance with furfural concentration under both aerobic and anaerobic conditions. These results indicate the presence of a single or multiple endogenous enzymes with broad and high affinity for furfural and co-factors in C. glutamicum ATCC13032.

TET-Catalyzed 5-Hydroxymethylation Precedes HNF4A Promoter Choice during Differentiation of Bipotent Liver Progenitors

Directory of Open Access Journals (Sweden)

Pierre-Benoit Ancey

2017-07-01

Full Text Available Understanding the processes that govern liver progenitor cell differentiation has important implications for the design of strategies targeting chronic liver diseases, whereby regeneration of liver tissue is critical. Although DNA methylation (5mC and hydroxymethylation (5hmC are highly dynamic during early embryonic development, less is known about their roles at later stages of differentiation. Using an in vitro model of hepatocyte differentiation, we show here that 5hmC precedes the expression of promoter 1 (P1-dependent isoforms of HNF4A, a master transcription factor of hepatocyte identity. 5hmC and HNF4A expression from P1 are dependent on ten-eleven translocation (TET dioxygenases. In turn, the liver pioneer factor FOXA2 is necessary for TET1 binding to the P1 locus. Both FOXA2 and TETs are required for the 5hmC-related switch in HNF4A expression. The epigenetic event identified here may be a key step for the establishment of the hepatocyte program by HNF4A.

Increase in furfural tolerance by combinatorial overexpression of NAD salvage pathway enzymes in engineered isobutanol-producing E. coli.

Science.gov (United States)

Song, Hun-Suk; Jeon, Jong-Min; Kim, Hyun-Joong; Bhatia, Shashi Kant; Sathiyanarayanan, Ganesan; Kim, Junyoung; Won Hong, Ju; Gi Hong, Yoon; Young Choi, Kwon; Kim, Yun-Gon; Kim, Wooseong; Yang, Yung-Hun

2017-12-01

To reduce the furfural toxicity for biochemical production in E. coli, a new strategy was successfully applied by supplying NAD(P)H through the nicotine amide salvage pathway. To alleviate the toxicity, nicotinamide salvage pathway genes were overexpressed in recombinant, isobutanol-producing E. coli. Gene expression of pncB and nadE respectively showed increased tolerance to furfural among these pathways. The combined expression of pncB and nadE was the most effective in increasing the tolerance of the cells to toxic aldehydes. By comparing noxE- and fdh-harbouring strains, the form of NADH, rather than NAD + , was the major effector of furfural tolerance. Overall, this study is the application of the salvage pathway to isobutanol production in the presence of furfural, and this system seems to be applicable to alleviate furfural toxicity in the production of other biochemical. Copyright © 2017 Elsevier Ltd. All rights reserved.

Increased Furfural Tolerance Due to Overexpression of NADH-Dependent Oxidoreductase FucO in Escherichia coli Strains Engineered for the Production of Ethanol and Lactate▿

OpenAIRE

Wang, X.; Miller, E. N.; Yomano, L. P.; Zhang, X.; Shanmugam, K. T.; Ingram, L. O.

2011-01-01

Furfural is an important fermentation inhibitor in hemicellulose sugar syrups derived from woody biomass. The metabolism of furfural by NADPH-dependent oxidoreductases, such as YqhD (low Km for NADPH), is proposed to inhibit the growth and fermentation of xylose in Escherichia coli by competing with biosynthesis for NADPH. The discovery that the NADH-dependent propanediol oxidoreductase (FucO) can reduce furfural provided a new approach to improve furfural tolerance. Strains that produced eth...

Acetone-butanol fermentation of lignocellulosic hydrolysates for the butanol production

Science.gov (United States)

Morozova, Tatyana; Semyonov, Sergey

2017-11-01

It is known that the use of lignocellulosic hydrolysates reduces the production cost of biofuel such as biobutanol and bioethanol. But for the most successful application of the hydrolysates for the biofuel production, it is necessary to apply an inexpensive and effective detoxification method and to use of cost-effective growth factors. In the present study, we evaluated the use of an acid hydrolysate of spruce and an enzymatic hydrolysate of miscanthus cellulose for the biobutanol production. To remove inhibitors from the hydrolysates, we applied the traditional physicochemical method with overliming and the biodetoxification method based on the use of the specially adapted activated sludge. Calcium hydroxide (150 g/L) was used for the neutralization. The biological method of detoxification of lignocellulosic hydrolysates was carried out under non-sterile conditions at room temperature by the specially adapted activated sludge of the urban wastewater treatment plants. The acetone-butanol fermentation was carried out by a strain of bacteria Clostridium acetobutylicum ATCC 824. The treatment by overliming removed 84-85 % and 83-86% of 5-hydroxymethylfurfural (5-HMF) and furfural from the hydrolysates respectively. Using the method of biodetoxification the content of furfural decreased by 98% and concentration of 5-HMF - by 97-99%. In the present study as an inexpensive source of growth substances for the fermentation of the hydrolysates it has been suggested to use decantate of the brewer's spent grain. The obtained results showed that the brewer's spent grain can be used in the biofuel production as efficiently as the synthetic growth substances.

Valorization of Furfural Residue by Hydrothermal Carbonization

DEFF Research Database (Denmark)

Yue, Fen; Zhang, Jia; Pedersen, Christian Marcus

2017-01-01

Furfural residue (FR) is a low-cost by-product generated in the furfural production from corncobs, which is mainly composed of cellulose and lignin. In this report, hydrothermal carbonization (HTC) of deashed FR was conducted at various reaction temperatures (200, 220 and 240 °C) and reaction times...

A combined process of adsorption and Fenton-like oxidation for furfural removal using zero-valent iron residue.

Science.gov (United States)

Li, Furong; Bao, Jianguo; Zhang, Tian C; Lei, Yutian

2015-01-01

In this study, the feasibility of using a combined adsorption and Fenton-like oxidation process (with zero-valent iron (ZVI) residue from heat wraps as an absorbent and catalyst) to remove furfural in the solution was evaluated. The influencing parameters (e.g. pH, H2O2 concentration, initial furfural concentration) and the reusability of ZVI residue (to replace the iron powder) were estimated. The ZVI residue was found to have much better adsorption effect on furfural at pH 2.0 compared with pH 6.7. For Fenton-like reaction alone with ZVI residue, the highest furfural removal of 97.5% was observed at the concentration of 0.176 mol/L H2O2, and all of the samples had >80% removal efficiency at different initial furfural concentrations of 2, 10, 20, 30 and 40 mmol/L. However, with a combined adsorption and Fenton-like oxidation, the removal efficiency of furfural was nearly 100% for all treatments. The ZVI residue used for furfural removal was much better than that of iron powder in the Fenton-like reaction at a seven-cycle experiment. This study suggests the combined process of adsorption and Fenton-like oxidation using ZVI residue is effective for the treatment of furfural in the liquid.

Mechanism of Microwave-Assisted Pyrolysis of Glucose to Furfural Revealed by Isotopic Tracer and Quantum Chemical Calculations.

Science.gov (United States)

Bao, Liwei; Shi, Lei; Luo, Hu; Kong, Lingzhao; Li, Shenggang; Wei, Wei; Sun, Yuhan

2017-08-10

Glucose labeled with 13 C or 18 O was used to investigate the mechanism of its conversion into furfural by microwaveassisted pyrolysis. The isotopic content and location in furfural were determined from GC-MS and 13 C NMR spectroscopic measurements and data analysis. The results suggest that the carbon skeleton in furfural is mainly derived from C1 to C5 of glucose, whereas the C of the aldehyde group and the O of the furan ring in furfural primarily originate from C1 and O5 of glucose, respectively. For the first time, the source of O in the furan ring of furfural was elucidated directly by experiment, providing results that are consistent with predictions from recent quantum chemical calculations. Moreover, further theoretical calculations indicate substantially lower energy barriers than previous predictions by considering the potential catalytic effect of formic acid, which is one of the pyrolysis products. The catalytic role of formic acid is further confirmed by experimental evidence. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Improvement of the fermentability of oxalic acid hydrolysates by detoxification using electrodialysis and adsorption.

Science.gov (United States)

Jeong, So-Yeon; Trinh, Ly Thi Phi; Lee, Hong-Joo; Lee, Jae-Won

2014-01-01

A two-step detoxification process consisting of electrodialysis and adsorption was performed to improve the fermentability of oxalic acid hydrolysates. The constituents of the hydrolysate differed significantly between mixed hardwood and softwood. Acetic acid and furfural concentrations were high in the mixed hardwood, whereas 5-hydroxymethylfurfural (HMF) concentration was relatively low compared with that of the mixed softwood. The removal efficiency of acetic acid reached 100% by electrodialysis (ED) process in both hydrolysates, while those of furfural and HMF showed very low, due to non-ionizable properties. Most of the remaining inhibitors were removed by XAD-4 resin. In the mixed hardwood hydrolysate without removal of the inhibitors, ethanol fermentation was not completed. Meanwhile, both ED-treated hydrolysates successfully produced ethanol with 0.08 and 0.15 g/Lh ethanol productivity, respectively. The maximum ethanol productivity was attained after fermentation with 0.27 and 0.35 g/Lh of detoxified hydrolysates, which were treated by ED, followed by XAD-4 resin. Copyright © 2013 Elsevier Ltd. All rights reserved.

Acrylamide and 5-hydroxymethylfurfural formation during biscuit baking. Part II: Effect of the ratio of reducing sugars and asparagine.

Science.gov (United States)

Nguyen, Ha T; van der Fels-Klerx, H J Ine; van Boekel, M A J S

2017-09-01

This study investigated acrylamide and 5-hydroxymethylfurfural (HMF) formation during biscuit baking. Four types of wheat flour with different molar ratios of total fructose and glucose to asparagine were investigated. Nevertheless, the molar ratio in all four biscuit doughs exceeded one after proofing due to enzyme action. Data obtained after baking were used to develop a mechanistic model, based on the asparagine-related pathway, for acrylamide and HMF formation in the four baked biscuit types. Asparagine reacted with fructose to form a Schiff base before decarboxylation to produce acrylamide without Amadori rearrangement product and sugar fragmentation. Fructose contributed considerably to acrylamide formation and to HMF formation via caramelization in all four biscuit types. No clear correlation was found between acrylamide and HMF in baked biscuits, nor between asparagine and the sum of glucose and fructose concentrations in the wheat flour. Copyright © 2017 Elsevier Ltd. All rights reserved.

Optimization of prehydrolysis time and substrate feeding to improve ethanol production by simultaneous saccharification and fermentation of furfural process residue.

Science.gov (United States)

He, Jianlong; Zhang, Wenbo; Liu, Xiaoyan; Xu, Ning; Xiong, Peng

2016-11-01

Ethanol is a very important industrial chemical. In order to improve ethanol productivity using Saccharomyces cerevisiae in fermentation from furfural process residue, we developed a process of simultaneous saccharification and fermentation (SSF) of furfural process residue, optimizing prehydrolysis cellulase loading concentration, prehydrolysis time, and substrate feeding strategy. The ethanol concentration obtained from the optimized process was 19.3 g/L, corresponding 76.5% ethanol yield, achieved by running SSF for 48 h from 10% furfural process residue with prehydrolysis at 50°C for 4 h and cellulase loading of 15 FPU/g furfural process residue. For higher ethanol concentrations, fed-batch fermentation was performed. The optimized fed-batch process increased the ethanol concentration to 37.6 g/L, 74.5% yield, obtained from 10% furfural process residue with two additions of 5% substrate at 12 and 24 h. Copyright © 2016 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Crystal Structure and Catalytic Mechanism of 7-Hydroxymethyl Chlorophyll a Reductase*

Science.gov (United States)

Wang, Xiao; Liu, Lin

2016-01-01

7-Hydroxymethyl chlorophyll a reductase (HCAR) catalyzes the second half-reaction in chlorophyll b to chlorophyll a conversion. HCAR is required for the degradation of light-harvesting complexes and is necessary for efficient photosynthesis by balancing the chlorophyll a/b ratio. Reduction of the hydroxymethyl group uses redox cofactors [4Fe-4S] cluster and FAD to transfer electrons and is difficult because of the strong carbon-oxygen bond. Here, we report the crystal structure of Arabidopsis HCAR at 2.7-Å resolution and reveal that two [4Fe-4S]clusters and one FAD within a very short distance form a consecutive electron pathway to the substrate pocket. In vitro kinetic analysis confirms the ferredoxin-dependent electron transport chain, thus supporting a proton-activated electron transfer mechanism. HCAR resembles a partial reconstruction of an archaeal F420-reducing [NiFe] hydrogenase, which suggests a common mode of efficient proton-coupled electron transfer through conserved cofactor arrangements. Furthermore, the trimeric form of HCAR provides a biological clue of its interaction with light-harvesting complex II. PMID:27072131

Analytical method used for intermediate products in continuous distillation of furfural

Energy Technology Data Exchange (ETDEWEB)

Wang, Z.L.; Jia, M.; Wang, L.J.; Deng, Y.X.

1981-01-01

During distillation of furfural, analysis of main components in the crude furfural condensate and intermediate products is very important. Since furfural and methylfurfural are homologous and both furfural and acetone contain a carbonyl group, components in the sample must be separated before analysis. An improved analytical method has been studied, the accuracy and precision of which would meet the requirement of industrial standards. The analytical procedure was provided as follows: to determine the furfural content with gravimetric method of barbituric acid; to determine the methanol content with dichromate method after precipitating furfural and acetone, and distilling the liquid for analysis; and to determine the methylfurfural content with bromide-bromate method, which can be used only in the sample containing higher content of methylfurfural. For the sample in low content, the gas-liquid chromatographic method can be used. 7 references.

Rheological modification of bitumens with new poly-functionalized furfural analogs

Energy Technology Data Exchange (ETDEWEB)

Alejandro Martinez; Antonio Paez; Nazario Martin [Universidad Complutense, Madrid (Spain). Departamento de Quimica Organica

2008-06-15

The rheological properties of bitumens modified with different aldehydes show that furfural is a very efficient reagent. An optimization of the reaction conditions involving concentration, acid catalyst, reaction time and temperature has been performed. In order to determine the influence of the furan ring and the formyl groups on the reactivity of bitumens, a series of new organic molecules as chemical reagents bearing up to six furan rings and four formyl groups, have been reacted with a B 80/100 bitumen. The results indicate a remarkably better performance than furfural, leading to harder modified bitumens. 31 refs., 3 figs., 5 tabs.

Effects of Furfural on the Respiratory Metabolism of Saccharomyces cerevisiae in Glucose-Limited Chemostats

Science.gov (United States)

Sárvári Horváth, Ilona; Franzén, Carl Johan; Taherzadeh, Mohammad J.; Niklasson, Claes; Lidén, Gunnar

2003-01-01

Effects of furfural on the aerobic metabolism of the yeast Saccharomyces cerevisiae were studied by performing chemostat experiments, and the kinetics of furfural conversion was analyzed by performing dynamic experiments. Furfural, an important inhibitor present in lignocellulosic hydrolysates, was shown to have an inhibitory effect on yeast cells growing respiratively which was much greater than the inhibitory effect previously observed for anaerobically growing yeast cells. The residual furfural concentration in the bioreactor was close to zero at all steady states obtained, and it was found that furfural was exclusively converted to furoic acid during respiratory growth. A metabolic flux analysis showed that furfural affected fluxes involved in energy metabolism. There was a 50% increase in the specific respiratory activity at the highest steady-state furfural conversion rate. Higher furfural conversion rates, obtained during pulse additions of furfural, resulted in respirofermentative metabolism, a decrease in the biomass yield, and formation of furfuryl alcohol in addition to furoic acid. Under anaerobic conditions, reduction of furfural partially replaced glycerol formation as a way to regenerate NAD+. At concentrations above the inlet concentration of furfural, which resulted in complete replacement of glycerol formation by furfuryl alcohol production, washout occurred. Similarly, when the maximum rate of oxidative conversion of furfural to furoic acid was exceeded aerobically, washout occurred. Thus, during both aerobic growth and anaerobic growth, the ability to tolerate furfural appears to be directly coupled to the ability to convert furfural to less inhibitory compounds. PMID:12839784

Removal of minute amount of furfural in ethanol aqueous solution by use of batch-rectification; Kaibun seiryu ni yoru ethanol suiyoekichu no biryo furfural no jokyo

Energy Technology Data Exchange (ETDEWEB)

Nakano, K.; Shimoda, M.; Uemura, Y.; Hatate, Y. [Kagoshima University, Kagoshima (Japan). Faculty of Engineering

1997-03-10

Furfural is produced in the distillation stage of low-class distilled spirit manufacturing and badly influences the quality of products. The removal of minute amount of furfural in an ethanol aqueous solution was thus investigated by an Oldershow-type batch-rectifying column consisting of ten plates. Furfural of 50 ppm was added to an ethanol aqueous solution of 6.6 mole% as raw materials. If the ethanol concentration in the upper distillation plates is set high, furfural is forecast to be concentrated in the intermediate plate. In an experiment, side-cut was carried out at this plate. If side-cut is performed at the seventh-plate tray from the top, the total side-cut rate is 12%. In this case, 77% of furfural is removed. The side-cut rate of ethanol at that time was 11%. Moreover, 85% of furfural was removed when ethanol with high concentration was extracted from the top under total reflux conditions and when side-cut was carried out. Only 9% of ethanol was distilled in this case. It was confirmed that furfural can be separated using a multi-plate batch-distilling column. 2 refs., 4 figs., 1 tab.

Microbial biodiesel production from oil palm biomass hydrolysate using marine Rhodococcus sp. YHY01.

Science.gov (United States)

Bhatia, Shashi Kant; Kim, Junyoung; Song, Hun-Seok; Kim, Hyun Joong; Jeon, Jong-Min; Sathiyanarayanan, Ganesan; Yoon, Jeong-Jun; Park, Kyungmoon; Kim, Yun-Gon; Yang, Yung-Hun

2017-06-01

The effect of various biomass derived inhibitors (i.e. furfural, hydroxymethylfurfural (HMF), vanillin, 4-hydroxy benzaldehyde (4-HB) and acetate) was investigated for fatty acid accumulation in Rhodococcus sp. YHY 01. Rhodococcus sp. YHY01 was able to utilize acetate, vanillin, and 4-HB for biomass production and fatty acid accumulation. The IC 50 value for furfural (3.1mM), HMF (3.2mM), vanillin (2.0mM), 4-HB (2.7mM) and acetate (3.7mM) was calculated. HMF and vanillin affect fatty acid composition and increase saturated fatty acid content. Rhodococcus sp. YHY 01 cultured with empty fruit bunch hydrolysate (EFBH) as the main carbon source resulted in enhanced biomass (20%) and fatty acid productivity (37%), in compression to glucose as a carbon source. Overall, this study showed the beneficial effects of inhibitory molecules on growth and fatty acid production, and support the idea of biomass hydrolysate utilization for biodiesel production by avoiding complex efforts to remove inhibitory compounds. Copyright © 2017 Elsevier Ltd. All rights reserved.

Production of levulinic acid, furfural, and gamma valerolactone from C.sub.5 and C.sub.6 carbohydrates in mono- and biphasic systems using gamma-valerolactone as a solvent

Science.gov (United States)

Dumesic, James A.; Alonso, David Martin; Gurbuz, Elif I.; Wettstein, Stephanie G.

2013-03-19

A method to make levulinic acid (LA), furfural, or gamma-valerolactone (GVL). React cellulose (and/or other C.sub.6 carbohydrates) or xylose (and/or other C.sub.5 carbohydrates) or combinations thereof in a monophasic reaction medium comprising GVL and an acid; or (ii) a biphasic reaction system comprising an organic layer comprising GVL, and a substantially immiscible aqueous layer. At least a portion of the cellulose (and/or other C.sub.6 carbohydrates), if present, is converted to LA and at least a portion of the xylose (and/or other C.sub.5 carbohydrates), if present, is converted into furfural.

Substituent effects on the relaxation dynamics of furan, furfural and β-furfural: a combined theoretical and experimental approach.

Science.gov (United States)

Oesterling, Sven; Schalk, Oliver; Geng, Ting; Thomas, Richard D; Hansson, Tony; de Vivie-Riedle, Regina

2017-01-18

For the series furan, furfural and β-furfural we investigated the effect of substituents and their positioning on the photoinduced relaxation dynamics in a combined theoretical and experimental approach. Using time resolved photoelectron spectroscopy with a high intensity probe pulse, we can, for the first time, follow the whole deactivation process of furan through a two photon probe signal. Using the extended 2-electron 2-orbital model [Nenov et al., J. Chem. Phys., 2011, 135, 034304] we explain the formation of one central conical intersection and predict the influence of the aldehyde group of the derivatives on its geometry. This, as well as the relaxation mechanisms from photoexcitation to the final outcome was investigated using a variety of theoretical methods. Complete active space self consistent field was used for on-the-fly calculations while complete active space perturbation theory and coupled cluster theory were used to accurately describe critical configurations. Experiment and theory show the relaxation dynamics of furfural and β-furfural to be slowed down, and together they disclose an additional deactivation pathway, which is attributed to the n O lonepair state introduced with the aldehyde group.

A novel method for furfural recovery via gas stripping assisted vapor permeation by a polydimethylsiloxane membrane

Science.gov (United States)

Hu, Song; Guan, Yu; Cai, Di; Li, Shufeng; Qin, Peiyong; Karim, M. Nazmul; Tan, Tianwei

2015-03-01

Furfural is an important platform chemical with a wide range of applications. However, due to the low concentration of furfural in the hydrolysate, the conventional methods for furfural recovery are energy-intensive and environmentally unfriendly. Considering the disadvantages of pervaporation (PV) and distillation in furfural separation, a novel energy-efficient `green technique', gas stripping assisted vapor permeation (GSVP), was introduced in this work. In this process, the polydimethylsiloxane (PDMS) membrane was prepared by employing water as solvent. Coking in pipe and membrane fouling was virtually non-existent in this new process. In addition, GSVP was found to achieve the highest pervaporation separation index of 216200 (permeate concentration of 71.1 wt% and furfural flux of 4.09 kgm-2h-1) so far, which was approximately 2.5 times higher than that found in pervaporation at 95°C for recovering 6.0 wt% furfural from water. Moreover, the evaporation energy required for GSVP decreased by 35% to 44% relative to that of PV process. Finally, GSVP also displayed more promising potential in industrial application than PV, especially when coupled with the hydrolysis process or fermentation in biorefinery industry.

Avaliação do tratamento térmico na composição química e na qualidade da cajuína Evaluation of the thermal treatment on the chemical composition and quality of "cajuína" beverage

Directory of Open Access Journals (Sweden)

Ronaldo Ferreira do Nascimento

2003-08-01

Full Text Available Neste trabalho foi estudado o efeito do processo de tratamento térmico na qualidade e composição química da bebida cajuína quando submetida ao cozimento sob temperatura constante de 100ºC durante 1:00, 1:30, 2:00, 2:30, 3:00 e 4:00 horas. Alíquotas foram coletadas em cada tempo de aquecimento e analisadas por cromatografia líquida de alta eficiência (CLAE em relação aos ácidos (cítrico e ascórbico, aldeídos furânicos (5-hidroximetilfurfural e furfural e açúcares (frutose, glicose e frutose. Os resultados foram reprodutíveis e indicaram que as cajuínas comerciais do estado do Ceará apresentam uma grande diversidade quanto ao processo de cozimento e ao teor de vitamina C, causados principalmente por processos térmicos inadequados. O tempo mais adequado sugerido para o "cozimento" da cajuína está em torno de 2:00h. O trabalho também aponta a combinação das análises de 5-HMF, furfural, ácido ascórbico e teor de ácido ascórbico/ácido cítrico como uma metodologia alternativa para a avaliação da qualidade da cajuína.In this work the effect of the thermal process on the quality and chemical composition of the beverage cajuína was studied. Cajuína is basically clarified cashew juice. Samples of cajuína were submitted to thermal processes, of constant heating (100ºC for 1:00, 1:30, 2:00, 2:30, 3:00 and 4:00 hours. The samples were subsequently analyzed by HPLC for glucose, fructose, citric acid, ascorbic acid, hydroxymethylfurfural (5-HMF and furfural. The results showed that the commercial cajuína beverage of Ceará State presented a great diversity in process standardization and vitamin C content, caused by inadequate thermal processing. The process is more efficient with a time period of 2:00hs. The work also indicates a combination of the analyses of 5-HMF, furfural and ascorbic acid and the ratio ascorbic acid/citric acid, as an alternative methodology for the evaluation of cajuína quality.

Extreme furfural tolerance of a soil bacterium Enterobacter cloacae GGT036.

Science.gov (United States)

Choi, Sun Young; Gong, Gyeongtaek; Park, Hong-Sil; Um, Youngsoon; Sim, Sang Jun; Woo, Han Min

2015-01-10

Detoxification process of cellular inhibitors including furfural is essential for production of bio-based chemicals from lignocellulosic biomass. Here we isolated an extreme furfural-tolerant bacterium Enterobacter cloacae GGT036 from soil sample collected in Mt. Gwanak, Republic of Korea. Among isolated bacteria, only E. cloacae GGT036 showed cell growth with 35 mM furfural under aerobic culture. Compared to the maximal half inhibitory concentration (IC50) of well-known industrial strains Escherichia coli (24.9 mM furfural) and Corynebacterium glutamicum (10 mM furfural) based on the cell density, IC50 of E. cloacae GGT036 (47.7 mM) was significantly higher after 24 h, compared to E. coli and C. glutamicum. Since bacterial cell growth was exponentially inhibited depending on linearly increased furfural concentrations in the medium, we concluded that E. cloacae GGT036 is an extreme furfural-tolerant bacterium. Recently, the complete genome sequence of E. cloacae GGT036 was announced and this could provide an insight for engineering of E. cloacae GGT036 itself or other industrially relevant bacteria. Copyright © 2014 Elsevier B.V. All rights reserved.

Enhanced Photocatalytic Degradation and Mineralization of Furfural Using UVC/TiO2/GAC Composite in Aqueous Solution

Directory of Open Access Journals (Sweden)

Bahram Ghasemi

2016-01-01

Full Text Available Titanium dioxide nanoparticles were immobilized on granular activated carbon (GAC as a porous and low-density support for photocatalytic degradation of furfural. The TiO2/GAC composite was synthetized using the simple sol-gel method and fully characterized. The effects of the operational parameters of furfural concentration (200–700 mg/L, initial pH (2–12, TiO2/GAC composite dosage (1–3.5 g/L, and irradiation time (20–120 min were studied. The synthetized TiO2/GAC composite exhibited a total pore volume of 0.13 cm3/g and specific surface area of 35.91 m2/g. Removal efficiency of up to 95% was observed at initial pH of 10, TiO2/GAC dosage of 2.5 g/L, irradiation time of 80 min, and initial furfural concentration of 500 mg/L. The photocatalyst could be reused at least four consecutive times with a mere 2% decrease in furfural removal efficiency. Mineralization efficiency of 94% was obtained within 80 min. Pseudo-first-order kinetics best fit the photocatalytic degradation of furfural under experimental conditions.

Performance Evaluation of Ozonation Combined with Persulfate Application for Removal of Furfural from Aqueous Solutions

Directory of Open Access Journals (Sweden)

Alireza Rahmani

2017-03-01

Full Text Available Background: Furfural is an organic compound which derived from a variety industrial, including petrochemicals, pulping, pharmaceutical, food. Also is a main agent in many industries and aromatic organic compounds entrance in the environment. There are several methods of treating including physical, chemical, biological and physicochemical for remove this matter. Among advanced oxidation methods can be combined ozonation process with persulfate catalytic are noted. The purpose of this study was to evaluate the efficiency of ozonation process with the use of persulfate in removal furfural from aqueous solution. Materials and Methods: In this study, the efficiency of the process with a concentration furfural 5 to 30 mg/L, concentration persulfate 4 to 15 mM, pH = 3-11 and reaction time of 35 minutes in the semi-continuous reactor with a capacity of one liter was obtained. Results: The results of this study have been shown in  conditions of operation optimal , pH =,3 persulfate dosage 12 mM, ozone dosage of 1 g/min and the initial concentration of furfural  5 mg/L, this process is capable  remove of %93/34 percent Furfural and %70 of the initial COD. Conclusion: The results of this study showed that the ozone/persulfate process can be a suitable process for the removal of organic aromatic compounds including pollutants of interest.

Removal of the Fermentation Inhibitor, Furfural, Using Activated Carbon in Cellulosic-Ethanol Production

KAUST Repository

Zhang, Kuang; Agrawal, Manoj; Harper, Justin; Chen, Rachel; Koros, William J.

2011-01-01

Ethanol can be produced from lignocellulosic biomass through fermentation; however, some byproducts from lignocellulosics, such as furfural compounds, are highly inhibitory to the fermentation and can substantially reduce the efficiency of ethanol

Decarboxylation of furfural on Pd(111): Ab initio molecular dynamics simulations

Science.gov (United States)

Xue, Wenhua; Dang, Hongli; Shields, Darwin; Liu, Yingdi; Jentoft, Friederike; Resasco, Daniel; Wang, Sanwu

2013-03-01

Furfural conversion over metal catalysts plays an important role in the studies of biomass-derived feedstocks. We report ab initio molecular dynamics simulations for the decarboxylation process of furfural on the palladium surface at finite temperatures. We observed and analyzed the atomic-scale dynamics of furfural on the Pd(111) surface and the fluctuations of the bondlengths between the atoms in furfural. We found that the dominant bonding structure is the parallel structure in which the furfural plane, while slightly distorted, is parallel to the Pd surface. Analysis of the bondlength fluctuations indicates that the C-H bond is the aldehyde group of a furfural molecule is likely to be broken first, while the C =O bond has a tendency to be isolated as CO. Our results show that the reaction of decarbonylation dominates, consistent with the experimental measurements. Supported by DOE (DE-SC0004600). Simulations and calculations were performed on XSEDE's and NERSC's supercomputers.

Contact allergy to 2-hydroxy-5-tert-butyl benzylalcohol and 2,6-bis(hydroxymethyl)-4-tert-butylphenol, components of a phenolic resin used in marking pens

DEFF Research Database (Denmark)

Hagdrup, H; Egsgaard, H; Carlsen, L

1994-01-01

2-hydroxy-5-tert-butyl benzylalcohol and 2,6-bis(hydroxymethyl)-4-tert-butylphenol were identified as contact allergens in a phenolic resin used as a tackifier in the ink of a marking pen, which, after being used directly on the skin, caused an acute contact dermatitis on the hand of a 13-year...

Furaldehyde substrate specificity and kinetics of Saccharomyces cerevisiae alcohol dehydrogenase 1 variants.

Science.gov (United States)

Laadan, Boaz; Wallace-Salinas, Valeria; Carlsson, Åsa Janfalk; Almeida, João Rm; Rådström, Peter; Gorwa-Grauslund, Marie F

2014-08-09

A previously discovered mutant of Saccharomyces cerevisiae alcohol dehydrogenase 1 (Adh1p) was shown to enable a unique NADH-dependent reduction of 5-hydroxymethylfurfural (HMF), a well-known inhibitor of yeast fermentation. In the present study, site-directed mutagenesis of both native and mutated ADH1 genes was performed in order to identify the key amino acids involved in this substrate shift, resulting in Adh1p-variants with different substrate specificities. In vitro activities of the Adh1p-variants using two furaldehydes, HMF and furfural, revealed that HMF reduction ability could be acquired after a single amino acid substitution (Y295C). The highest activity, however, was reached with the double mutation S110P Y295C. Kinetic characterization with both aldehydes and the in vivo primary substrate acetaldehyde also enabled to correlate the alterations in substrate affinity with the different amino acid substitutions. We demonstrated the key role of Y295C mutation in HMF reduction by Adh1p. We generated and kinetically characterized a group of protein variants using two furaldehyde compounds of industrial relevance. Also, we showed that there is a threshold after which higher in vitro HMF reduction activities do not correlate any more with faster in vivo rates of HMF conversion, indicating other cell limitations in the conversion of HMF.

Maternal Methyl-Group Donor Intake and Global DNA (HydroxyMethylation before and during Pregnancy

Directory of Open Access Journals (Sweden)

Sara Pauwels

2016-08-01

Full Text Available It is still unclear to which extent methyl-group intake during pregnancy can affect maternal global DNA (hydroxylmethylation. Pregnancy methylation profiling and its link with methyl-group intake in a healthy population could enhance our understanding of the development of pregnancy related disorders. One hundred forty-eight women were enrolled in the MANOE (MAternal Nutrition and Offspring’s Epigenome study. Thiry-four women were enrolled before pregnancy and 116 during the first trimester of pregnancy. Global DNA (hydroxymethylation in blood using LC-MS/MS and dietary methyl-group intake (methionine, folate, betaine, and choline using a food-frequency questionnaire were estimated pre-pregnancy, during each trimester, and at delivery. Global DNA (hydroxymethylation levels were highest pre-pregnancy and at weeks 18–22 of pregnancy. We observed a positive relation between folic acid and global DNA methylation (p = 0.04 and hydroxymethylation (p = 0.04. A high intake of methionine pre-pregnancy and in the first trimester showed lower (hydroxymethylation percentage in weeks 11–13 and weeks 18–22, respectively. Choline and betaine intake in the first weeks was negatively associated with hydroxymethylation. Women with a high intake of these three methyl groups in the second and third trimester showed higher hyrdoxymethylation/methylation levels in the third trimester. To conclude, a time trend in DNA (hydroxymethylation was found and women with higher methyl-group intake showed higher methylation in the third trimester, and not in earlier phases of pregnancy.

Biotransformation of 5-hydroxy-methylfurfural into 2,5-furan-dicarboxylic acid by bacterial isolate using thermal acid algal hydrolysate.

Science.gov (United States)

Yang, Chu-Fang; Huang, Ci-Ruei

2016-08-01

Thermal acid hydrolysis is often used to deal with lignocellulosic biomasses, but 5-hydroxy-methylfurfural (5-HMF) formed during hydrolysis deeply influences downstream fermentation. 2,5-Furan-dicarboxylic acid (FDCA), which is in the list of future important biomass platform molecules can be obtained using 5-HMF biotransformation. Based on the connection between 5-HMF removal in acid hydrolysate and FDCA production, the optimum thermal acid hydrolysis condition for macroalgae Chaetomorpha linum was established. Potential microbes capable of transforming 5-HMF into FDCA were isolated and characterized under various parameters and inoculated into algal hydrolysate to perform 5-HMF biotransformation. The optimum hydrolysis condition was to apply 0.5M HCl to treat 3% algal biomass under 121°C for 15min. Isolated Burkholderia cepacia H-2 could transform 2000mg/L 5-HMF at the initial pH of 7 at 28°C and 1276mg/L FDCA was received. Strain B. cepacia H-2 was suitable for treating the algal hydrolysate without dilution, receiving 989.5mg/L FDCA. Copyright © 2016 Elsevier Ltd. All rights reserved.

Lignin-Furfural Based Adhesives

Directory of Open Access Journals (Sweden)

Prajakta Dongre

2015-07-01

Full Text Available Lignin recovered from the hot-water extract of sugar maple (Acer saccharum is used in this study to synthesize adhesive blends to replace phenol-formaldehyde (PF resin. Untreated lignin is characterized by lignin content and nuclear magnetic resonance (NMR analysis. The molecular weight distribution of the lignin and the blends are characterized by size exclusion chromatography (SEC. The effect of pH (0.3, 0.65 and 1, ex situ furfural, and curing conditions on the tensile properties of adhesive reinforced glass fibers is determined and compared to the reinforcement level of commercially available PF resin. The adhesive blend prepared at pH = 0.65 with no added furfural exhibits the highest tensile properties and meets 90% of the PF tensile strength.

Catalytic conversion of xylose and corn stalk into furfural over carbon solid acid catalyst in γ-valerolactone.

Science.gov (United States)

Zhang, Tingwei; Li, Wenzhi; Xu, Zhiping; Liu, Qiyu; Ma, Qiaozhi; Jameel, Hasan; Chang, Hou-min; Ma, Longlong

2016-06-01

A novel carbon solid acid catalyst was synthesized by the sulfonation of carbonaceous material which was prepared by carbonization of sucrose using 4-BDS as a sulfonating agent. TEM, N2 adsorption-desorption, elemental analysis, XPS and FT-IR were used to characterize the catalyst. Then, the catalyst was applied for the conversion of xylose and corn stalk into furfural in GVL. The influence of the reaction time, temperature and dosage of catalyst on xylose dehydration were also investigated. The Brønsted acid catalyst exhibited high activity in the dehydration of xylose, with a high furfural yield of 78.5% at 170°C in 30min. What's more, a 60.6% furfural yield from corn stalk was achieved in 100min at 200°C. The recyclability of the sulfonated carbon catalyst was perfect, and it could be reused for 5times without the loss of furfural yields. Copyright © 2016 Elsevier Ltd. All rights reserved.

Comparative Proteomic Analysis of Tolerance and Adaptation of Ethanologenic Saccharomyces cerevisiae to Furfural, a Lignocellulosic Inhibitory Compound▿ †

Science.gov (United States)

Lin, Feng-Ming; Qiao, Bin; Yuan, Ying-Jin

2009-01-01

The molecular mechanism involved in tolerance and adaptation of ethanologenic Saccharomyces cerevisiae to inhibitors (such as furfural, acetic acid, and phenol) represented in lignocellulosic hydrolysate is still unclear. Here, 18O-labeling-aided shotgun comparative proteome analysis was applied to study the global protein expression profiles of S. cerevisiae under conditions of treatment of furfural compared with furfural-free fermentation profiles. Proteins involved in glucose fermentation and/or the tricarboxylic acid cycle were upregulated in cells treated with furfural compared with the control cells, while proteins involved in glycerol biosynthesis were downregulated. Differential levels of expression of alcohol dehydrogenases were observed. On the other hand, the levels of NADH, NAD+, and NADH/NAD+ were reduced whereas the levels of ATP and ADP were increased. These observations indicate that central carbon metabolism, levels of alcohol dehydrogenases, and the redox balance may be related to tolerance of ethanologenic yeast for and adaptation to furfural. Furthermore, proteins involved in stress response, including the unfolded protein response, oxidative stress, osmotic and salt stress, DNA damage and nutrient starvation, were differentially expressed, a finding that was validated by quantitative real-time reverse transcription-PCR to further confirm that the general stress responses are essential for cellular defense against furfural. These insights into the response of yeast to the presence of furfural will benefit the design and development of inhibitor-tolerant ethanologenic yeast by metabolic engineering or synthetic biology. PMID:19363068

Method and apparatus for furfural production

OpenAIRE

Marcotullio, G.; De Jong, W.

2015-01-01

The invention concerns a process for the production of furfural from pentoses and/or water soluble pentosans, comprising the steps of feeding an aqueous pentose solution containing one or more pentoses or soluble pentosans to the bottom of a reaction column to produce an aqueous liquid upflow; heating the bottom part of the column using a heat exchanger to produce a steam upflow in the column; recovering a vapour product stream containing water and furfural from the top of the column; and con...

Dehydration of D-xylose to furfural using acid-functionalized MWCNTs catalysts

Science.gov (United States)

Termvidchakorn, Chompoopitch; Itthibenchapong, Vorranutch; Songtawee, Siripit; Chamnankid, Busaya; Namuangruk, Supawadee; Faungnawakij, Kajornsak; Charinpanitkul, Tawatchai; Khunchit, Radchadaporn; Hansupaluk, Nanthiya; Sano, Noriaki; Hinode, Hirofumi

2017-09-01

Acid-functionalized multi-wall carbon nanotubes (MWCNTs) catalysts were prepared by a wet chemical sonication with various acid solutions, i.e. H2SO4, H3PO4, HNO3, and HCl. Sulfonic groups and carboxyl groups were detected on MWCNTs with H2SO4 treatment (s-MWCNTs), while only carboxyl groups were presented from other acid treatments. The catalytic dehydration of D-xylose into furfural was evaluated using a batch reactor at 170 °C for 3 h under N2 pressure of 15 bar. The highest furfural selectivity was achieved around 57% by s-MWCNTs catalyst, suggesting a positive role of the sulfonic functionalized groups. The effect of Co species was related to their Lewis acid property resulting in the enhancement of xylose conversion with low selectivity to furfural product. Invited talk at 5th Thailand International Nanotechnology Conference (Nano Thailand-2016), 27-29 November 2016, Nakhon Ratchasima, Thailand.

FudC, a protein primarily responsible for furfural detoxification in Corynebacterium glutamicum.

Science.gov (United States)

Tsuge, Yota; Kudou, Motonori; Kawaguchi, Hideo; Ishii, Jun; Hasunuma, Tomohisa; Kondo, Akihiko

2016-03-01

Lignocellulosic hydrolysates contain compounds that inhibit microbial growth and fermentation, thereby decreasing the productivity of biofuel and biochemical production. In particular, the heterocyclic aldehyde furfural is one of the most toxic compounds found in these hydrolysates. We previously demonstrated that Corynebacterium glutamicum converts furfural into the less toxic compounds furfuryl alcohol and 2-furoic acid. To date, however, the genes involved in these oxidation and reduction reactions have not been identified in the C. glutamicum genome. Here, we show that Cgl0331 (designated FudC) is mainly responsible for the reduction of furfural into furfuryl alcohol in C. glutamicum. Deletion of the gene encoding FudC markedly diminished the in vivo reduction of furfural to furfuryl alcohol. Purified His-tagged FudC protein from Escherichia coli was also shown to convert furfural into furfuryl alcohol in an in vitro reaction utilizing NADPH, but not NADH, as a cofactor. Kinetic measurements demonstrated that FudC has a high affinity for furfural but has a narrow substrate range for other aldehydes compared to the protein responsible for furfural reduction in E. coli.

Comparison of separate hydrolysis and fermentation and simultaneous saccharification and fermentation processes for ethanol production from wheat straw by recombinant Escherichia coli strain FBR5

Energy Technology Data Exchange (ETDEWEB)

Saha, Badal C.; Nichols, Nancy N.; Qureshi, Nasib; Cotta, Michael A. [U.S. Department of Agriculture, Agricultural Research Services Peoria, IL (United States). Bioenergy Reserach Unit

2011-11-15

Ethanol production by recombinant Escherichia coli strain FBR5 from dilute acid pretreated wheat straw (WS) by separate hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF) was studied. The yield of total sugars from dilute acid (0.5% H2SO4) pretreated (160 C, 10 min) and enzymatically saccharified (pH 5.0, 45 C, 72 h) WS (86 g/l) was 50.0 {+-} 1.4 g/l. The hydrolyzate contained 1,184 {+-} 19 mg furfural and 161 {+-} 1 mg hydroxymethyl furfural per liter. The recombinant E. coli FBR5 could not grow at all at pH controlled at 4.5 to 6.5 in the non-abated wheat straw hydrolyzate (WSH) at 35 C. However, it produced 21.9 {+-} 0.3 g ethanol from non-abated WSH (total sugars, 44.1 {+-} 0.4 g/l) in 90 h including the lag time of 24 h at controlled pH 7.0 and 35 C. The bioabatement of WS was performed by growing Coniochaeta ligniaria NRRL 30616 in the liquid portion of the pretreated WS aerobically at pH 6.5 and 30 C for 15 h. The bacterium produced 21.6 {+-} 0.5 g ethanol per liter in 40 h from the bioabated enzymatically saccharified WSH (total sugars, 44.1 {+-} 0.4 g) at pH 6.0. It produced 24.9 {+-} 0.3 g ethanol in 96 h and 26.7 {+-} 0.0 g ethanol in 72 h per liter from bioabated WSH by batch SSF and fed-batch SSF, respectively. SSF offered a distinct advantage over SHF with respect to reducing total time required to produce ethanol from the bioabated WS. Also, fed-batch SSF performed better than the batch SSF with respect to shortening the time requirement and increase in ethanol yield. (orig.)

Furfural and glucose can enhance conversion of xylose to xylitol by Candida magnoliae TISTR 5663.

Science.gov (United States)

Wannawilai, Siwaporn; Lee, Wen-Chien; Chisti, Yusuf; Sirisansaneeyakul, Sarote

2017-01-10

Xylitol production from xylose by the yeast Candida magnoliae TISTR 5663 was enhanced by supplementing the fermentation medium with furfural (300mg/L) and glucose (3g/L with an initial mass ratio of glucose to xylose of 1:10) together under oxygen limiting conditions. In the presence of furfural and glucose, the final concentration of xylitol was unaffected relative to control cultures but the xylitol yield on xylose increased by about 5%. Supplementation of the culture medium with glucose alone at an initial concentration of 3g/L, stimulated the volumetric and specific rates of xylose consumption and the rate of xylitol production from xylose. In a culture medium containing 30g/L xylose, 300mg/L furfural and 3g/L glucose, the volumetric production rate of xylitol was 1.04g/L h and the specific production rate was 0.169g/g h. In the absence of furfural and glucose, the volumetric production rate of xylitol was ∼35% lower and the specific production rate was nearly 30% lower. In view of these results, xylose-containing lignocellulosic hydrolysates contaminated with furfural can be effectively used for producing xylitol by fermentation so long as the glucose-to-xylose mass ratio in the hydrolysate does not exceed 1:10 and the furfural concentration is ≤300mg/L. Copyright © 2016 Elsevier B.V. All rights reserved.

Reagent and process for detaching furfural in petroleum products

Energy Technology Data Exchange (ETDEWEB)

Orelup, R.B.

1987-07-14

A two-component liquid reagent and process is provided for detecting the presence of furfural in petroleum products. The reagent comprises two components which are stored separately from each other and are combined prior to admixture with the petroleum product. The process comprises combining the two separate components of the liquid reagent with each other prior to use, admixing the combined components with a petroleum product containing furfural, shaking the resultant mixture, allowing the mixture to separate and observing a red color characteristic of furfural in the lower layer. Alternately, the process may be carried out by combining the second component of the two-component liquid reagent with the petroleum product, followed by admixture with the first component to obtain two separate layers in which the red color characteristic of furfural is observed in the lower layer.

Increased furfural tolerance due to overexpression of NADH-dependent oxidoreductase FucO in Escherichia coli strains engineered for the production of ethanol and lactate.

Science.gov (United States)

Wang, X; Miller, E N; Yomano, L P; Zhang, X; Shanmugam, K T; Ingram, L O

2011-08-01

Furfural is an important fermentation inhibitor in hemicellulose sugar syrups derived from woody biomass. The metabolism of furfural by NADPH-dependent oxidoreductases, such as YqhD (low K(m) for NADPH), is proposed to inhibit the growth and fermentation of xylose in Escherichia coli by competing with biosynthesis for NADPH. The discovery that the NADH-dependent propanediol oxidoreductase (FucO) can reduce furfural provided a new approach to improve furfural tolerance. Strains that produced ethanol or lactate efficiently as primary products from xylose were developed. These strains included chromosomal mutations in yqhD expression that permitted the fermentation of xylose broths containing up to 10 mM furfural. Expression of fucO from plasmids was shown to increase furfural tolerance by 50% and to permit the fermentation of 15 mM furfural. Product yields with 15 mM furfural were equivalent to those of control strains without added furfural (85% to 90% of the theoretical maximum). These two defined genetic traits can be readily transferred to enteric biocatalysts designed to produce other products. A similar strategy that minimizes the depletion of NADPH pools by native detoxification enzymes may be generally useful for other inhibitory compounds in lignocellulosic sugar streams and with other organisms.

Increased Furfural Tolerance Due to Overexpression of NADH-Dependent Oxidoreductase FucO in Escherichia coli Strains Engineered for the Production of Ethanol and Lactate▿

Science.gov (United States)

Wang, X.; Miller, E. N.; Yomano, L. P.; Zhang, X.; Shanmugam, K. T.; Ingram, L. O.

2011-01-01

Furfural is an important fermentation inhibitor in hemicellulose sugar syrups derived from woody biomass. The metabolism of furfural by NADPH-dependent oxidoreductases, such as YqhD (low Km for NADPH), is proposed to inhibit the growth and fermentation of xylose in Escherichia coli by competing with biosynthesis for NADPH. The discovery that the NADH-dependent propanediol oxidoreductase (FucO) can reduce furfural provided a new approach to improve furfural tolerance. Strains that produced ethanol or lactate efficiently as primary products from xylose were developed. These strains included chromosomal mutations in yqhD expression that permitted the fermentation of xylose broths containing up to 10 mM furfural. Expression of fucO from plasmids was shown to increase furfural tolerance by 50% and to permit the fermentation of 15 mM furfural. Product yields with 15 mM furfural were equivalent to those of control strains without added furfural (85% to 90% of the theoretical maximum). These two defined genetic traits can be readily transferred to enteric biocatalysts designed to produce other products. A similar strategy that minimizes the depletion of NADPH pools by native detoxification enzymes may be generally useful for other inhibitory compounds in lignocellulosic sugar streams and with other organisms. PMID:21685167

Polar aprotic solvent-water mixture as the medium for catalytic production of hydroxymethylfurfural (HMF) from bread waste.

Science.gov (United States)

Yu, Iris K M; Tsang, Daniel C W; Chen, Season S; Wang, Lei; Hunt, Andrew J; Sherwood, James; De Oliveira Vigier, Karine; Jérôme, François; Ok, Yong Sik; Poon, Chi Sun

2017-12-01

Valorisation of bread waste for hydroxymethylfurfural (HMF) synthesis was examined in dimethyl sulfoxide (DMSO)-, tetrahydrofuran (THF)-, acetonitrile (ACN)-, and acetone-water (1:1v/v), under heating at 140°C with SnCl 4 as the catalyst. The overall rate of the process was the fastest in ACN/H 2 O and acetone/H 2 O, followed by DMSO/H 2 O and THF/H 2 O due to the rate-limiting glucose isomerisation. However, the formation of levulinic acid (via rehydration) and humins (via polymerisation) was more significant in ACN/H 2 O and acetone/H 2 O. The constant HMF maxima (26-27mol%) in ACN/H 2 O, acetone/H 2 O, and DMSO/H 2 O indicated that the rates of desirable reactions (starch hydrolysis, glucose isomerisation, and fructose dehydration) relative to undesirable pathways (HMF rehydration and polymerisation) were comparable among these mediums. They also demonstrated higher selectivity towards HMF production over the side reactions than THF/H 2 O. This study differentiated the effects of polar aprotic solvent-water mediums on simultaneous pathways during biomass conversion. Copyright © 2017 Elsevier Ltd. All rights reserved.

Growth of a Strictly Anaerobic Bacterium on Furfural (2-Furaldehyde)

OpenAIRE

Brune, Gerhard; Schoberth, Siegfried M.; Sahm, Hermann

1983-01-01

A strictly anaerobic bacterium was isolated from a continuous fermentor culture which converted the organic constituents of sulfite evaporator condensate to methane and carbon dioxide. Furfural is one of the major components of this condensate. This furfural isolate could degrade furfural as the sole source of carbon and energy in a defined mineral-vitamin-sulfate medium. Acetic acid was the major fermentation product. This organism could also use ethanol, lactate, pyruvate, or fumarate and c...

Biomass pyrolysis: Thermal decomposition mechanisms of furfural and benzaldehyde

Science.gov (United States)

Vasiliou, AnGayle K.; Kim, Jong Hyun; Ormond, Thomas K.; Piech, Krzysztof M.; Urness, Kimberly N.; Scheer, Adam M.; Robichaud, David J.; Mukarakate, Calvin; Nimlos, Mark R.; Daily, John W.; Guan, Qi; Carstensen, Hans-Heinrich; Ellison, G. Barney

2013-09-01

The thermal decompositions of furfural and benzaldehyde have been studied in a heated microtubular flow reactor. The pyrolysis experiments were carried out by passing a dilute mixture of the aromatic aldehydes (roughly 0.1%-1%) entrained in a stream of buffer gas (either He or Ar) through a pulsed, heated SiC reactor that is 2-3 cm long and 1 mm in diameter. Typical pressures in the reactor are 75-150 Torr with the SiC tube wall temperature in the range of 1200-1800 K. Characteristic residence times in the reactor are 100-200 μsec after which the gas mixture emerges as a skimmed molecular beam at a pressure of approximately 10 μTorr. Products were detected using matrix infrared absorption spectroscopy, 118.2 nm (10.487 eV) photoionization mass spectroscopy and resonance enhanced multiphoton ionization. The initial steps in the thermal decomposition of furfural and benzaldehyde have been identified. Furfural undergoes unimolecular decomposition to furan + CO: C4H3O-CHO (+ M) → CO + C4H4O. Sequential decomposition of furan leads to the production of HC≡CH, CH2CO, CH3C≡CH, CO, HCCCH2, and H atoms. In contrast, benzaldehyde resists decomposition until higher temperatures when it fragments to phenyl radical plus H atoms and CO: C6H5CHO (+ M) → C6H5CO + H → C6H5 + CO + H. The H atoms trigger a chain reaction by attacking C6H5CHO: H + C6H5CHO → [C6H6CHO]* → C6H6 + CO + H. The net result is the decomposition of benzaldehyde to produce benzene and CO.

Resistance of Saccharomyces cerevisiae to High Concentrations of Furfural Is Based on NADPH-Dependent Reduction by at Least Two Oxireductases ▿ †

Science.gov (United States)

Heer, Dominik; Heine, Daniel; Sauer, Uwe

2009-01-01

Biofuels derived from lignocellulosic biomass hold promises for a sustainable fuel economy, but several problems hamper their economical feasibility. One important problem is the presence of toxic compounds in processed lignocellulosic hydrolysates, with furfural as a key toxin. While Saccharomyces cerevisiae has some intrinsic ability to reduce furfural to the less-toxic furfuryl alcohol, higher resistance is necessary for process conditions. By comparing an evolved, furfural-resistant strain and its parent in microaerobic, glucose-limited chemostats at increasing furfural challenge, we elucidate key mechanism and the molecular basis of both natural and high-level furfural resistance. At lower concentrations of furfural, NADH-dependent oxireductases are the main defense mechanism. At furfural concentrations above 15 mM, however, 13C-flux and global array-based transcript analysis demonstrated that the NADPH-generating flux through the pentose phosphate pathway increases and that NADPH-dependent oxireductases become the major resistance mechanism. The transcript analysis further revealed that iron transmembrane transport is upregulated in response to furfural. While these responses occur in both strains, high-level resistance in the evolved strain was based on strong induction of ADH7, the uncharacterized open reading frame (ORF) YKL071W, and four further, likely NADPH-dependent, oxireductases. By overexpressing the ADH7 gene and the ORF YKL071W, we inversely engineered significantly increased furfural resistance in the parent strain, thereby demonstrating that these two enzymes are key elements of the resistance phenotype. PMID:19854918

Production of furfural from palm oil empty fruit bunches: kinetic model comparation

Science.gov (United States)

Panjaitan, J. R. H.; Monica, S.; Gozan, M.

2017-05-01

Furfural is a chemical compound that can be applied to pharmaceuticals, cosmetics, resins and cleaning compound which can be produced by acid hydrolysis of biomass. Indonesia’s demand for furfural in 2010 reached 790 tons that still imported mostly 72% from China. In this study, reaction kinetic models of furfural production from oil palm empty fruit bunches with submitting acid catalyst at the beginning of the experiment will be determine. Kinetic data will be obtained from hydrolysis of empty oil palm bunches using sulfuric acid catalyst 3% at temperature 170°C, 180°C and 190°C for 20 minutes. From this study, the kinetic model to describe the production of furfural is the kinetic model where generally hydrolysis reaction with an acid catalyst in hemicellulose and furfural will produce the same decomposition product which is formic acid with different reaction pathways. The activation energy obtained for the formation of furfural, the formation of decomposition products from furfural and the formation of decomposition products from hemicellulose is 8.240 kJ/mol, 19.912 kJ/mol and -39.267 kJ / mol.

Highly Efficient Gas-Phase Oxidation of Renewable Furfural to Maleic Anhydride over Plate Vanadium Phosphorus Oxide Catalyst.

Science.gov (United States)

Li, Xiukai; Ko, Jogie; Zhang, Yugen

2018-02-09

Maleic anhydride (MAnh) and its acids are critical intermediates in chemical industry. The synthesis of maleic anhydride from renewable furfural is one of the most sought after processes in the field of sustainable chemistry. In this study, a plate vanadium phosphorus oxide (VPO) catalyst synthesized by a hydrothermal method with glucose as a green reducing agent catalyzes furfural oxidation to MAnh in the gas phase. The plate catalyst-denoted as VPO HT -has a preferentially exposed (200) crystal plane and exhibited dramatically enhanced activity, selectivity and stability as compared to conventional VPO catalysts and other state-of-the-art catalytic systems. At 360 °C reaction temperature with air as an oxidant, about 90 % yield of MAnh was obtained at 10 vol % of furfural in the feed, a furfural concentration value that is much higher than those (<2 vol %) reported for other catalytic systems. The catalyst showed good long-term stability and there was no decrease in activity or selectivity for MAnh during the time-on-stream of 25 h. The high efficiency and catalyst stability indicate the great potential of this system for the synthesis of maleic anhydride from renewable furfural. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

FURFURAL YIELD AND DECOMPOSITION IN SODIUM 2,4DIMETHYLBENZENESULFONATE--SULFURIC ACID--WATER SOLUTIONS.

Science.gov (United States)

Batch-type microreactors (about 1/40 milliliter of reactants) were used to measure furfural yields from acidified xylose solutions containing sodium...It was found that presence of the salt did not affect the quantity of furfural produced, but greatly increased the rate of formation. The regular...increase in rate of furfural formation was directly related to the increase in the rate xylose decomposition, and furfural yields for all salt and acid

Chemicals from Biomass: Combining Ring-Opening Tautomerization and Hydrogenation Reactions to Produce 1,5-Pentanediol from Furfural.

Science.gov (United States)

Brentzel, Zachary J; Barnett, Kevin J; Huang, Kefeng; Maravelias, Christos T; Dumesic, James A; Huber, George W

2017-04-10

A process for the synthesis of 1,5-pentanediol (1,5-PD) with 84 % yield from furfural is developed, utilizing dehydration/hydration, ring-opening tautomerization, and hydrogenation reactions. Although this process has more reaction steps than the traditional direct hydrogenolysis of tetrahydrofurfuryl alcohol (THFA), techno-economic analyses demonstrate that this process is the economically preferred route for the synthesis of biorenewable 1,5-PD. 2-Hydroxytetrahydropyran (2-HY-THP) is the key reaction pathway intermediate that allows for a decrease in the minimum selling price of 1,5-PD. The reactivity of 2-HY-THP is 80 times greater than that of THFA over a bimetallic hydrogenolysis catalyst. This enhanced reactivity is a result of the ring-opening tautomerization to 5-hydoxyvaleraldehyde and subsequent hydrogenation to 1,5-PD. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Treatment of Furfural Wastewater by (AOPs Photo-Fenton Method

Directory of Open Access Journals (Sweden)

Yasmen A. Mustafa

2015-03-01

Full Text Available The objective of this study is to investigate the application of advanced oxidation processes (AOPs in the treatment of wastewater contaminated with furfural. The AOPs investigated is the homogeneous photo-Fenton (UV/H2O2/Fe+2 process. The experiments were conducted by using cylindrical stainless steel batch photo-reactor. The influence of different variables: initial concentration of H2O2 (300-1300mg/L, Fe+2(20-70mg/L, pH(2-7 and initial concentration of furfural (50-300 mg/L and their relationship with the mineralization efficiency were studied. Complete mineralization for the system UV/H2O2/Fe+2 was achieved at: initial H2O2 = 1300mg/L, Fe+2 = 30mg/L, pH=3, temperature =30oC and irradiation time of 60 min, for 300mg/L furfural concentration. The results have shown that the oxidation reagent H2O2 plays a very important role in the furfural mineralization.

Direct enzyme assay evidence confirms aldehyde reductase function of Ydr541cp and Ygl039wp from Saccharomyces cerevisiae

Science.gov (United States)

Aldehyde reductase gene ARI1 is a recently characterized member of intermediate subfamily under SDR (short-chain dehydrogenase/reductase) superfamily that revealed mechanisms of in situ detoxification of furfural and HMF for tolerance of Saccharomyces cerevisiae. Uncharacterized open reading frames ...

Polymerization behavior of butyl bis(hydroxymethyl)phosphine oxide ...

Indian Academy of Sciences (India)

lenovo

Polymerization behavior of butyl bis(hydroxymethyl)phosphine oxide: Phosphorus containing polyethers for. Li‒ion conductivities. Heeralal Vignesh Babu, Billakanti Srinivas and Krishnamurthi Muralidharan*. School of Chemistry, University of Hyderabad, Hyderabad - 500046, India. Table of Contents. TGA plots of SPE2.

Resources for the growth of furfural production in the hydrolytic industry

Energy Technology Data Exchange (ETDEWEB)

Maksimenko, N.S.

1981-01-01

New sources of pentosan-containing raw materials for the manufacture of furfural in the USSR are discussed. Potential sources of pentosan-containing raw materials for the manufacture of furfural are shrubbery, rice straw, and wood and pulp waste. The yield of furfural can also be increased by 2-phase hydrolysis of hardwoods in a batch reactor in the presence of 92-94% H/sub 2/S0/sub 4/.

Kinetics and mechanism of furfural oxidation by ions of heterovalent metals

Energy Technology Data Exchange (ETDEWEB)

Krupenskij, V.I. (Ukhtinskij Industrial' nyj Inst. (USSR))

1983-01-01

Real constants of rate of furfural oxidation by Cu/sup 2 +/, Fe/sup 3 +/, Ce/sup 4 +/, Ag/sup +/, Hg/sup 2 +//sub 2/ ions are determined, other kinetic and activation parameters of reactions are calculated, constants of stability and other thermodynamic characteristics of furfural complex with cations-oxidizers are found. Schemes of furfural transformations at one- and two-electron oxidation by ions of variable-valency metals are suggested.

Ab initio study on the dynamics of furfural at the liquid-solid interfaces

Science.gov (United States)

Dang, Hongli; Xue, Wenhua; Shields, Darwin; Liu, Yingdi; Jentoft, Friederike; Resasco, Daniel; Wang, Sanwu

2013-03-01

Catalytic biomass conversion sometimes occurs at the liquid-solid interfaces. We report ab initio molecular dynamics simulations at finite temperatures for the catalytic reactions involving furfural at the water-Pd and water-Cu interfaces. We found that, during the dynamic process, the furan ring of furfural prefers to be parallel to the Pd surface and the aldehyde group tends to be away from the Pd surface. On the other hand, at the water-Cu(111) interface, furfural prefers to be tilted to the Cu surface while the aldehyde group is bonded to the surface. In both cases, interaction of liquid water and furfural is identified. The difference of dynamic process of furfural at the two interfaces suggests different catalytic reaction mechanisms for the conversion of furfural, consistent with the experimental investigations. Supported by DOE (DE-SC0004600). Simulations and calculations were performed on XSED's and NERSC's supercomputers

Charge Transfer Effect on Raman and Surface Enhanced Raman Spectroscopy of Furfural Molecules.

Science.gov (United States)

Wan, Fu; Shi, Haiyang; Chen, Weigen; Gu, Zhaoliang; Du, Lingling; Wang, Pinyi; Wang, Jianxin; Huang, Yingzhou

2017-08-02

The detection of furfural in transformer oil through surface enhanced Raman spectroscopy (SERS) is one of the most promising online monitoring techniques in the process of transformer aging. In this work, the Raman of individual furfural molecules and SERS of furfural-M x (M = Ag, Au, Cu) complexes are investigated through density functional theory (DFT). In the Raman spectrum of individual furfural molecules, the vibration mode of each Raman peak is figured out, and the deviation from experimental data is analyzed by surface charge distribution. In the SERS of furfural-M x complexes, the influence of atom number and species on SERS chemical enhancement factors (EFs) are studied, and are further analyzed by charge transfer effect. Our studies strengthen the understanding of charge transfer effect in the SERS of furfural molecules, which is important in the online monitoring of the transformer aging process through SERS.

The Effect of Detergents on the Morphology and Immunomodulatory Activity of Malassezia furfur.

Science.gov (United States)

Kim, Su-Han; Ko, Hyun-Chang; Kim, Moon-Bum; Kwon, Kyung-Sool; Oh, Chang-Keun

2009-05-01

Several workers have found that Malassezia are capable of suppressing cytokine release and downregulating the phagocytic function of monocytes. But lipid-depleted Malassezia furfur (M. furfur) extracts have also been shown to induce increased production of TNF-alpha, IL-6 and IL-1beta in monocytes. We thought that the detergents in shampoos or soaps could change the composition of the lipid in the M. furfur cell wall. We studied whether detergents affect the morphology of M. furfur and if the inflammatory cytokine profiles change in the monocytes treated with detergent-treated M. furfur. Commonly used detergents such as sodium lauryl sulfate, ammonium lauryl sulfate and tween-80 were respectively added to the modified Leeming-Notman's media. M. furfur was cultivated in each media (detergent-added or untreated). Thereafter, the surface morphology of the yeast was evaluated by scanning and transmission electron microscopy. The cytokine profiles of monocytes, which were treated by M. furfur with or without detergents, were also evaluated. The detergent-treated M. furfur were similar to the lipid-extracted form of M. furfur on the electron microscopic study, with a recessed, withered surface and with thinner and rather electron transparent cell walls than the detergent-untreated M. furfur. The levels of TNF-alpha were higher in monocytes treated with detergent-treated Malassezia than that in the monocytes treated with the detergent-untreated Malassezia (pdetergents in shampoos or soaps affect the lipid layers of the Malassezia cell wall and these lipid-extracted Malassezia induce or aggravate some inflammatory conditions. But to correlate the relationship between detergents and Malassezia-associated diseases, in vivo experiments that will focus on short-term contact with detergents in real life conditions should be done.

Conversion of C6 and C5 sugars in undetoxified wet exploded bagasse hydrolysates using Scheffersomyces (Pichia) stipitis CBS6054

DEFF Research Database (Denmark)

Biswas, Rajib; Uellendahl, Hinrich; Ahring, Birgitte Kiær

2013-01-01

Sugarcane bagasse is a potential feedstock for cellulosic ethanol production, rich in both glucan and xylan. This stresses the importance of utilizing both C6 and C5 sugars for conversion into ethanol in order to improve the process economics. During processing of the hydrolysate degradation...... products such as acetate, 5-hydroxymethylfurfural (HMF) and furfural are formed, which are known to inhibit microbial growth at higher concentrations. In the current study, conversion of both glucose and xylose sugars into ethanol in wet exploded bagasse hydrolysates was investigated without detoxification...... using Scheffersomyces (Pichia) stipitis CBS6054, a native xylose utilizing yeast strain. The sugar utilization ratio and ethanol yield (Yp/s) ranged from 88-100% and 0.33-0.41 ± 0.02 g/g, respectively, in all the hydrolysates tested. Hydrolysate after wet explosion at 185°C and 6 bar O2, composed...

Direct formation of gasoline hydrocarbons from cellulose by hydrothermal conversion with in situ hydrogen

International Nuclear Information System (INIS)

Yin, Sudong; Mehrotra, Anil Kumar; Tan, Zhongchao

2012-01-01

A new process based on aqueous-phase dehydration/hydrogenation (APD/H) has been developed to directly produce liquid alkanes (C 7–9 ), which are the main components of fossil gasoline, from cellulose in one single batch reactor without the consumption of external hydrogen (H 2 ). In this new process, part of the cellulose is first converted to in situ H 2 by steam reforming (SR) in the steam gas phase mainly; and, in the liquid water phase, cellulose is converted to an alkane precursor, such as 5-(hydroxymethyl)furfural (HMF). In the final reaction step, in situ H 2 reacts with HMF to form liquid alkanes through APD/H. Accordingly, this new process has been named SR(H 2 )-APD/H. Experimental results show that the volumetric ratio of the reactor headspace to the reactor (H/R) and an initial weakly alkaline condition are the two key parameters for SR(H 2 )-APD/H. With proper H/R ratios (e.g., 0.84) and initial weakly alkaline conditions (e.g., pH = 7.5), liquid alkanes are directly formed from the SR(H 2 )-APD/H of cellulose using in situ H 2 instead of external H 2 . In this study, compared with pyrolysis and hydrothermal liquefaction of cellulose at the same temperatures with same retetion time, SR(H 2 )-APD/H greatly increased the liquid alkane yields, by approximately 700 times and 35 times, respectively. Based on this process, direct formation of fossil gasoline from renewable biomass resources without using external H 2 becomes possible. -- Highlights: ► A process of producing gasoline alkanes from cellulose was proposed and studied. ► Alkane precursors and in situ H 2 were formed simultaneously in a single reactor. ► Alkanes subsequently formed by reactions between in situ H 2 and alkane precursors. ► The yields were 700 and 35 times higher than pyrolysis and hydrothermal conversion.

The ultrasonic relaxation spectra for furfural molecules undergoing conformational changes

International Nuclear Information System (INIS)

Mirzaev, S. Z.; Telyaev, S. Q.; Egamberdiev, K.

2011-01-01

The acoustic spectra of liquid furfural have been investigated in the frequency range from 0.1MHz to 150 MHz and at the temperatures from 303.15 K to 333.15 K. The ultrasonic spectra of pure furfural show two relaxation processes. One relaxation process is located in the frequency range ∼0.2 MHz, and the second in the frequency range ∼2 MHz. The process with the lower relaxation frequency has been assigned to the 'X0-cis and X0-trans' internal rotation of furfural molecules. (authors)

Effect of furfural on ethanol production by S. cerevisiae in a cross-linked immobilized cell reactor

Energy Technology Data Exchange (ETDEWEB)

Boyer, L.J.; Vega, J.L.; Basu, R.; Clausen, E.C.; Gaddy, J.L. (Arkansas Univ., Fayetteville, AR (United States). Dept. of Chemical Engineering)

1992-01-01

Furfural, a browning reaction product, inhibits yeast (Saccharomyces cerevisiae) growth and metabolism at low concentration levels in batch culture. The performance of an immobilized cell reactor (ICR) in the presence of 0-2.0 g l[sup -1] of furfural was examined. Cell growth in the ICR, with and without furfural in the media, indicated that either furfural did not impair glucose utilization, or that the negative effects of furfural were negated by increasing cell density in the reactor. Ethanol yields were constant at 0.48 g ethanol per g glucose regardless of the furfural concentration in the media. Although the specific productivity in the ICR decreased with furfural concentration, the productivity based on liquid hold-up remained constant. Furfural was depleted in the ICR during the experimental operation. Thus, furfural levels of 2.0 g 1[sup -1] or less can be tolerated by the yeast for ethanol production in the ICR without negatively affecting reactor performance. (author).

Genotoxic activities of the food contaminant 5-hydroxymethylfurfural using different in vitro bioassays.

Science.gov (United States)

Severin, Isabelle; Dumont, Coralie; Jondeau-Cabaton, Adeline; Graillot, Vanessa; Chagnon, Marie-Christine

2010-02-01

5-Hydroxymethylfurfural (5-HMF) is known as an indicator of quality deterioration in a wide range of foods. 5-HMF is formed as an intermediate in the Maillard reaction and has been identified in a wide variety of heat-processed foods. In recent years, the presence of 5-HMF in foods has raised toxicological concerns: data have shown cytotoxic, genotoxic and tumoral effects but further studies suggest that 5-HMF does not pose a serious health risk. However the subject is still a matter of debate. We investigated the genotoxicity of the food-borne contaminant 5-HMF using the Ames test, the micronucleus (MN) and the single-cell gel electrophoresis (SCGE) assays in the human metabolically active HepG2 cell line. Cytotoxic effect of 5-HMF was first assessed using Alamar Blue as a sensitive sub-lethal assay. 5-HMF did not induce any genic mutation in bacteria whatever the concentration in the Ames test. Furthermore, it does not induce clastogenic or aneugenic effects in the HepG2 cells. In contrast, 5-HMF induced HepG2 DNA damage at concentrations from 7.87 to 25 mM in the comet assay suggesting a weak genotoxic effect of 5-HMF in the HepG2 cells probably repaired. 2009 Elsevier Ireland Ltd. All rights reserved.

On kinetics and mechanism of' furfural oxidation by ions of heterovalent metals

International Nuclear Information System (INIS)

Krupenskij, V.I.

1983-01-01

Real constants of rate of furfural oxidation by Cu 2+ , Fe 3+ , Ce 4+ , Ag + , Hg 2+ 2 ions are determined, other kinetic and activation parameters of reactions are calculated, constants of stability and other thermodynamic characteristics of furfural complex with cations-oxidizers are found. Schemes of furfural transformations at one- and two-electron oxidation by ions of variable-valency metals are suggested

A new correction method for determination on carbohydrates in lignocellulosic biomass.

Science.gov (United States)

Li, Hong-Qiang; Xu, Jian

2013-06-01

The accurate determination on the key components in lignocellulosic biomass is the premise of pretreatment and bioconversion. Currently, the widely used 72% H2SO4 two-step hydrolysis quantitative saccharification (QS) procedure uses loss coefficient of monosaccharide standards to correct monosaccharide loss in the secondary hydrolysis (SH) of QS and may result in excessive correction. By studying the quantitative relationships of glucose and xylose losses during special hydrolysis conditions and the HMF and furfural productions, a simple correction on the monosaccharide loss from both PH and SH was established by using HMF and furfural as the calibrators. This method was used to the component determination on corn stover, Miscanthus and cotton stalk (raw materials and pretreated) and compared to the NREL method. It has been proved that this method can avoid excessive correction on the samples with high-carbohydrate contents. Copyright © 2013 Elsevier Ltd. All rights reserved.

The impact of furfural concentrations and substrate-to-biomass ratios on biological hydrogen production from synthetic lignocellulosic hydrolysate using mesophilic anaerobic digester sludge.

Science.gov (United States)

Akobi, Chinaza; Hafez, Hisham; Nakhla, George

2016-12-01

This study evaluated the impact of furfural (a furan derivative) on hydrogen production rates and yields at initial substrate-to-microorganism ratios (S°/X°) of 4, 2, 1, and 0.5gCOD/gVSS and furfural concentrations of 4, 2, 1, and 0.5g/L. Fermentation studies were carried out in batches using synthetic lignocellulosic hydrolysate as substrate and mesophilic anaerobic digester sludge as seed. Contrary to other literature studies where furfural was inhibitory, this study showed that furfural concentrations of up to 1g/L enhanced hydrogen production with yields as high as 19% from the control (batch without furfural). Plots of hydrogen yields against gfurfural/gsugars and hydrogen yields versus gfurfural/gbiomass showed negative linear correlation indicating that these parameters influence biohydrogen production. Regression analysis indicated that gfurfural/gsugars initial exerted a greater effect on the degree of inhibition of hydrogen production than gfurfural/gVSS final . Copyright © 2016 Elsevier Ltd. All rights reserved.

Formation of Hydroxymethyl DNA Adducts in Rats Orally Exposed to Stable Isotope Labeled Methanol

Science.gov (United States)

Lu, Kun; Gul, Husamettin; Upton, Patricia B.; Moeller, Benjamin C.; Swenberg, James A.

2012-01-01

Methanol is a large volume industrial chemical and widely used solvent and fuel additive. Methanol’s well known toxicity and use in a wide spectrum of applications has raised long-standing environmental issues over its safety, including its carcinogenicity. Methanol has not been listed as a carcinogen by any regulatory agency; however, there are debates about its carcinogenic potential. Formaldehyde, a metabolite of methanol, has been proposed to be responsible for the carcinogenesis of methanol. Formaldehyde is a known carcinogen and actively targets DNA and protein, causing diverse DNA and protein damage. However, formaldehyde-induced DNA adducts arising from the metabolism of methanol have not been reported previously, largely due to the absence of suitable DNA biomarkers and the inability to differentiate what was due to methanol compared with the substantial background of endogenous formaldehyde. Recently, we developed a unique approach combining highly sensitive liquid chromatography-mass spectrometry methods and exposure to stable isotope labeled chemicals to simultaneously quantify formaldehyde-specific endogenous and exogenous DNA adducts. In this study, rats were exposed daily to 500 or 2000 mg/kg [13CD4]-methanol by gavage for 5 days. Our data demonstrate that labeled formaldehyde arising from [13CD4]-methanol induced hydroxymethyl DNA adducts in multiple tissues in a dose-dependent manner. The results also demonstrated that the number of exogenous DNA adducts was lower than the number of endogenous hydroxymethyl DNA adducts in all tissues of rats administered 500 mg/kg per day for 5 days, a lethal dose to humans, even after incorporating an average factor of 4 for reduced metabolism due to isotope effects of deuterium-labeled methanol into account. PMID:22157354

Environmental Management in the Process of Purification of Cuban Furfural in the Chemical Bioactive Center Plant

Directory of Open Access Journals (Sweden)

Ing. Liset Rodríguez-Machín

2016-02-01

Full Text Available It is necessary to establish in the installed equipment, operating conditions and quality specifications in the purification of furfural produced in Cuba. To do this some literature review and experiments are carried out. The approved batches by the quality control are quantified as well as the heat and evaporation losses and the impact on workers health. Energy management is performed by identifying electricity as the energy source of higher consumption. Some measures are applied like coating the evaporator portions that are required together with condenser modification and improvement of the room ventilation. As a result it was shown that it is possible to purify the Cuban furfural in the installed equipment, the process efficiency increases in 5,5 %, the evaporation losses decrease and non-acceptance by quality control drops. If the imported furfural is replaced by the Cuban are saved about 39 000 • per year production.

Synthesis of "trans"-4,5-Bis-dibenzylaminocyclopent-2-Enone from Furfural Catalyzed by ErCl[subscript 3]·6H[subscript 2]O

Science.gov (United States)

Estevão, Mónica S.; Martins, Ricardo J. V.; Alfonso, Carlos A. M.

2017-01-01

An experiment exploring the chemistry of the carbonyl group for the one-step synthesis of "trans"-4,5- dibenzylaminocyclopent-2-enone is described. The reaction of furfural and dibenzylamine in the environmentally friendly solvent ethanol and catalyzed by the Lewis acid ErCl[subscript 3]·6H[subscript 2]O afforded the product in high…

Combinatorial application of two aldehyde oxidoreductases on isobutanol production in the presence of furfural.

Science.gov (United States)

Seo, Hyung-Min; Jeon, Jong-Min; Lee, Ju Hee; Song, Hun-Suk; Joo, Han-Byul; Park, Sung-Hee; Choi, Kwon-Young; Kim, Yong Hyun; Park, Kyungmoon; Ahn, Jungoh; Lee, Hongweon; Yang, Yung-Hun

2016-01-01

Furfural is a toxic by-product formulated from pretreatment processes of lignocellulosic biomass. In order to utilize the lignocellulosic biomass on isobutanol production, inhibitory effect of the furfural on isobutanol production was investigated and combinatorial application of two oxidoreductases, FucO and YqhD, was suggested as an alternative strategy. Furfural decreased cell growth and isobutanol production when only YqhD or FucO was employed as an isobutyraldehyde oxidoreductase. However, combinatorial overexpression of FucO and YqhD could overcome the inhibitory effect of furfural giving higher isobutanol production by 110% compared with overexpression of YqhD. The combinatorial oxidoreductases increased furfural detoxification rate 2.1-fold and also accelerated glucose consumption 1.4-fold. When it compares to another known system increasing furfural tolerance, membrane-bound transhydrogenase (pntAB), the combinatorial aldehyde oxidoreductases were better on cell growth and production. Thus, to control oxidoreductases is important to produce isobutanol using furfural-containing biomass and the combinatorial overexpression of FucO and YqhD can be an alternative strategy.

Furfural formation from the pre-hydrolysis liquor of a hardwood kraft-based dissolving pulp production process.

Science.gov (United States)

Liu, Haitang; Hu, Huiren; Jahan, M Sarwar; Ni, Yonghao

2013-03-01

This study aimed to produce furfural from the PHL. Results showed best furfural yield of 32.8% and the furfural selectivity of 37.7% in the monophase system (170 °C, 100 min), while they were 60.1% and 69.8%, respectively in the biphase system. The lower furfural selectivity in the monophase system was explained by more side reactions, such as fragmentation, condensation reactions, resinification and others. Model compounds such as: xylose, furfural, syringaldehyde, were used to confirm/identify these side reactions. The addition of dilute sulfuric acid/acetic acid in the system under the same conditions decreased the recovery of furfural. The addition of syringaldehyde into the PHL also led to a decrease in the furfural yield, supporting the conclusion that lignin structures in the PHL may also be involved in the side reactions, thus decreasing the furfural yield. Copyright © 2012 Elsevier Ltd. All rights reserved.

Study of furfural-urea grout

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

An analysis of raw materials, formulation and performance of furfural-urea grout is given. Characteristics of the grout slurry, mechanism of stabilization and examples of shaft sinking with grouting in quicksand are summarized.

Catalytic conversion of cellulose into 5-hydroxymethylfurfural over chromium trichloride in ionic liquid

Energy Technology Data Exchange (ETDEWEB)

Wang, Shui; Du, Yizhen; Zhang, Wenqian; Cheng, Xiaowei; Wang, Jidong [Beijing University of Chemical Technology, Beijing (China)

2014-10-15

An efficient method for converting cellulose into 5-hydroxymethylfurfural (5-HMF) using an inexpensive ionic liquid tetrabutylammonium chloride (TBAC) and relatively low-toxicity catalyst of chromium (Ⅲ) trichloride (CrCl{sub 3}·6H{sub 2}O) was developed. The effects of hydrochloric acid loading, catalyst dosage, reaction temperature and time on the yield of 5-HMF were surveyed to achieve optimal reaction conditions. A 5-HMF yield of 43.7% was obtained within 90 min at 140 .deg. C using oil-bath heating. Glucose and starch were also investigated as feedstock to produce 5-HMF in TBAC/CrCl{sub 3}·6H{sub 2}O system, in which the 5-HMF yield was considerable. After 5-HMF was extracted, TBAC/CrCl{sub 3}·6H{sub 2}O could be used for several runs.

Catalytic valorization of starch-rich food waste into hydroxymethylfurfural (HMF): Controlling relative kinetics for high productivity.

Science.gov (United States)

Yu, Iris K M; Tsang, Daniel C W; Yip, Alex C K; Chen, Season S; Wang, Lei; Ok, Yong Sik; Poon, Chi Sun

2017-08-01

This study aimed to maximize the valorization of bread waste, a typical food waste stream, into hydroxymethylfurfural (HMF) by improving our kinetic understanding. The highest HMF yield (30mol%) was achieved using SnCl 4 as catalyst, which offered strong derived Brønsted acidity and moderate Lewis acidity. We evaluated the kinetic balance between these acidities to facilitate faster desirable reactions (i.e., hydrolysis, isomerization, and dehydration) relative to undesirable reactions (i.e., rehydration and polymerization). Such catalyst selectivity of SnCl 4 , AlCl 3 , and FeCl 3 was critical in maximizing HMF yield. Higher temperature made marginal advancement by accelerating the undesirable reactions to a similar extent as the desirable pathways. The polymerization-induced metal-impregnated high-porosity carbon was a possible precursor of biochar-based catalyst, further driving up the economic potential. Preliminary economic analysis indicated a net gain of USD 43-236 per kilogram bread waste considering the thermochemical-conversion cost and chemical-trading revenue. Copyright © 2017 Elsevier Ltd. All rights reserved.

DNA-Directed alkylating agents. 7. Synthesis, DNA interaction, and antitumor activity of bis(hydroxymethyl)- and bis(carbamate)-substituted pyrrolizines and imidazoles.

Science.gov (United States)

Atwell, G J; Fan, J Y; Tan, K; Denny, W A

1998-11-19

A series of bis(hydroxymethyl)-substituted imidazoles, thioimidazoles, and pyrrolizines and related bis(carbamates), linked to either 9-anilinoacridine (intercalating) or 4-(4-quinolinylamino)benzamide (minor groove binding) carriers, were synthesized and evaluated for sequence-specific DNA alkylation and cytotoxicity. The imidazole and thioimidazole analogues were prepared by initial synthesis of [(4-aminophenyl)alkyl]imidazole-, thioimidazole-, or pyrrolizine dicarboxylates, coupling of these with the desired carrier, and reduction to give the required bis(hydroxymethyl) alkylating moiety. The pyrrolizines were the most reactive alkylators, followed by the thioimidazoles, while the imidazoles were unreactive. The pyrrolizines and some of the thioimidazoles cross-linked DNA, as measured by agarose gel electrophoresis. Strand cleavage assays showed that none of the compounds reacted at purine N7 or N3 sites in the gpt region of the plasmid gpt2Eco, but the polymerase stop assay showed patterns of G-alkylation in C-rich regions. The corresponding thioimidazole bis(carbamates) were more selective than the bis(hydroxymethyl) pyrrolizines, with high-intensity bands at 5'-NCCN, 5'-NGCN and 5'-NCGN sequences in the PCR stopping assay ( indicates block sites). The data suggest that these targeted compounds, like the known thioimidazole bis(carbamate) carmethizole, alkylate exclusively at guanine residues via the 2-amino group, with little or no alkylation at N3 and N7 guanine or adenine sites. The cytotoxicities of the compounds correlated broadly with their reactivities, with the bis(hydroxymethyl)imidazoles being the least cytotoxic (IC50s >1 microM; P388 leukemia) and with the intercalator-linked analogues being more cytotoxic than the corresponding minor-groove-targeted ones. This was true also for the more reactive thioimidazole bis(carbamates) (IC50s 0.8 and 11 microM, respectively), but both were more active than the analogous "untargeted" carmethizole (IC50 20

Acid-catalysed xylose dehydration into furfural in the presence of kraft lignin.

Science.gov (United States)

Lamminpää, Kaisa; Ahola, Juha; Tanskanen, Juha

2015-02-01

In this study, the effects of kraft lignin (Indulin AT) on acid-catalysed xylose dehydration into furfural were studied in formic and sulphuric acids. The study was done using D-optimal design. Three variables in both acids were included in the design: time (20-80 min), temperature (160-180°C) and initial lignin concentration (0-20 g/l). The dependent variables were xylose conversion, furfural yield, furfural selectivity and pH change. The results showed that the xylose conversion and furfural yield decreased in sulphuric acid, while in formic acid the changes were minor. Additionally, it was showed that lignin has an acid-neutralising capacity, and the added lignin increased the pH of reactant solutions in both acids. The pH rise was considerably lower in formic acid than in sulphuric acid. However, the higher pH did not explain all the changes in conversion and yield, and thus lignin evidently inhibits the formation of furfural. Copyright © 2014 Elsevier Ltd. All rights reserved.

L-Glycine Alleviates Furfural-Induced Growth Inhibition during Isobutanol Production in Escherichia coli.

Science.gov (United States)

Song, Hun-Suk; Jeon, Jong-Min; Choi, Yong Keun; Kim, Jun-Young; Kim, Wooseong; Yoon, Jeong-Jun; Park, Kyungmoon; Ahn, Jungoh; Lee, Hongweon; Yang, Yung-Hun

2017-12-28

Lignocellulose is now a promising raw material for biofuel production. However, the lignin complex and crystalline cellulose require pretreatment steps for breakdown of the crystalline structure of cellulose for the generation of fermentable sugars. Moreover, several fermentation inhibitors are generated with sugar compounds, majorly furfural. The mitigation of these inhibitors is required for the further fermentation steps to proceed. Amino acids were investigated on furfural-induced growth inhibition in E. coli producing isobutanol. Glycine and serine were the most effective compounds against furfural. In minimal media, glycine conferred tolerance against furfural. From the IC₅₀ value for inhibitors in the production media, only glycine could alleviate growth arrest for furfural, where 6 mM glycine addition led to a slight increase in growth rate and isobutanol production from 2.6 to 2.8 g/l under furfural stress. Overexpression of glycine pathway genes did not lead to alleviation. However, addition of glycine to engineered strains blocked the growth arrest and increased the isobutanol production about 2.3-fold.

Direct decarbonylation of furfural to furan: A density functional theory study on Pt-graphene

Science.gov (United States)

Fellah, Mehmet Ferdi

2017-05-01

The catalytic mechanism of direct decarbonylation of furfural to furan on Pt graphene surface has been investigated by means of density functional theory (DFT) calculations. The main catalytic mechanism proposed in this study has six steps such as furfural adsorption, dissociation of H from adsorbed furfural, dissociation of carbon monoxide (molecularly) from adsorbed complex, furan formation and desorption of products. It has been concluded that the rate determining step for direct decarbonylation of furfural to furan is furan formation step and global activation barrier for this catalytic system is 82 kJ/mol consisting of zero point energy and thermal energy corrections. Pt-graphene structure has an important role on the catalytic decarbonylation of furfural to furan without any other reactants. This accordingly points out that Pt doped graphene structure might be an encouraging catalyst for direct decarbonylation of furfural to furan molecule as a valuable chemical material.

Isolation and characterization of a furfural-degrading bacterium Bacillus cereus sp. strain DS1.

Science.gov (United States)

Zheng, Dan; Bao, Jianguo; Lu, Jueming; Gao, Chunlei

2015-02-01

Furfural was found to be the main organic pollutant in the wastewater coming from the Diosgenin factory. This substance is derived from acidic pentosan in Dioscorea zingiberensis and is also found in a variety of agricultural byproducts, including corncobs, oat, wheat bran, and sawdust. It is regarded as a toxicant and an inhibitor to the growth of microorganism in both sewage disposal and biological fermentation. A furfural-degrading strain (DS1) was isolated from activated sludge of wastewater treatment plant in a diosgenin factory by continuous enrichment culture. The strain was identified as Bacillus cereus based on morphological, physiological tests, as well as on 16S rDNA sequence and Biolog analyses. The capacity of this strain to grow on a mineral salt medium, utilizing furfural as the sole carbon and energy source to degrade furfural, was investigated in this study. Under the condition of pH 9.0, temperature 35 °C, with rotating speed of 150 rpm, and an inoculum of 6 %, the strain showed that the furfural degradation capacity reaches 35 % in 7 days, as measured by high-performance liquid chromatography. The addition of inorganic carbon sources could bring down the biodegradation efficiency of the furfural. The strain DS1 showed better furfural removal capacity, as compared to other inorganic carbon sources in the media. Furthermore, a furfural concentration of as high as 4,000 mg L(-1) was tolerated by the culture. The capacity to degrade furfural was demonstrated for the first time by using the genus B. cereus. This study suggests the possible application in biodegradation strategies.

Omics-based approaches reveal phospholipids remodeling of Rhizopus oryzae responding to furfural stress for fumaric acid-production from xylose.

Science.gov (United States)

Pan, Xinrong; Liu, Huanhuan; Liu, Jiao; Wang, Cheng; Wen, Jianping

2016-12-01

In order to relieve the toxicity of furfural on Rhizopus oryzae fermentation, the molecular mechanism of R. oryzae responding to furfural stress for fumaric acid-production was investigated by omics-based approaches. In metabolomics analysis, 29 metabolites including amino acid, sugars, polyols and fatty acids showed significant changes for maintaining the basic cell metabolism at the cost of lowering fumaric acid production. To further uncover the survival mechanism, lipidomics was carried out, revealing that phosphatidylcholine, phosphatidylglycerol, phosphatidylinositol and polyunsaturated acyl chains might be closely correlated with R. oryzae's adapting to furfural stress. Based on the above omics analysis, lecithin, inositol and soybean oil were exogenously supplemented separately with an optimized concentration in the presence of furfural, which increased fumaric acid titer from 5.78g/L to 10.03g/L, 10.05g/L and 12.13g/L (increased by 73.5%, 73.8% and 110%, respectively). These findings provide a methodological guidance for hemicellulose-fumaric acid development. Copyright © 2016 Elsevier Ltd. All rights reserved.

Relationship between the losses of furfural in the oil purification process and the furfural quality

Energy Technology Data Exchange (ETDEWEB)

Shiriaeva, G.P.; Baiburskaia, E.L.; Kalenik, G.S.; Martynenko, A.G.; Okhrimenko, N.V.

1981-01-01

It is demonstrated that the use of low quality furfural in the purification process of oil results in a situation where approximately 10% of the solvent delivered to these enterprises make up the avoidable losses.

Study of the Influence of Key Process Parameters on Furfural Production.

Science.gov (United States)

Fele Žilnik, Ljudmila; Grilc, Viktor; Mirt, Ivan; Cerovečki, Željko

2016-01-01

The present work reports the influence of key process variables on the furfural formation from leached chestnut-wood chips in a pressurized reactor. Effect of temperature, pressure, type and concentration of the catalyst solution, the steam flow rate or stripping module, the moisture content of the wood particles and geometric characteristics such as size and type of the reactor, particle size and bed height were considered systematically. One stage process was only taken into consideration. Lab-scale and pilot-scale studies were performed. The results of the non-catalysed laboratory experiments were compared with an actual non-catalysed (auto-catalysed) industrial process and with experiments on the pilot scale, the latter with 28% higher furfural yield compared to the others. Application of sulphuric acid as catalyst, in an amount of 0.03-0.05 g (H2SO4 100%)/g d.m. (dry material), enables a higher production of furfural at lower temperature and pressure of steam in a shorter reaction time. Pilot scale catalysed experiments have revealed very good performance for furfural formation under less severe operating conditions, with a maximum furfural yield as much as 88% of the theoretical value.

Furfural production from biomass pretreatment hydrolysate using vapor-releasing reactor system.

Science.gov (United States)

Liu, Lu; Chang, Hou-Min; Jameel, Hasan; Park, Sunkyu

2018-03-01

Biomass hydrolysate from autohydrolysis pretreatment was used for furfural production considering it is in rich of xylose, xylo-oligomers, and other decomposition products from hemicellulose structure. By using the vapor-releasing reactor system, furfural was protected from degradation by separating it from the reaction media. The maximum furfural yield of 73% was achieved at 200 °C for biomass hydrolysate without the use of the catalyst. This is because the presence of organic acids such as acetic acid in hydrolysate functioned as a catalyst. According to the results in this study, biomass hydrolysate with a vapor-releasing system proves to be efficient for furfural production. The biorefinery process which allows the separation of xylose-rich autohydrolysate from other parts from biomass feedstock also improves the overall application of the biomass. Copyright © 2018 Elsevier Ltd. All rights reserved.

A high performance liquid chromatography method for determination of furfural in crude palm oil.

Science.gov (United States)

Loi, Chia Chun; Boo, Huey Chern; Mohammed, Abdulkarim Sabo; Ariffin, Abdul Azis

2011-09-01

A modified steam distillation method was developed to extract furfural from crude palm oil (CPO). The collected distillates were analysed using high performance liquid chromatography (HPLC) coupled with an ultraviolet diode detector at 284nm. The HPLC method allowed identification and quantification of furfural in CPO. The unique thermal extraction of CPO whereby the fresh fruit bunches (FFB) are first subjected to steam treatment, distinguishes itself from other solvent-extracted or cold-pressed vegetable oils. The presence of furfural was also determined in the fresh palm oil from FFB (without undergoing the normal extraction process), palm olein, palm stearin, olive oil, coconut oil, sunflower oil, soya oil and corn oil. The chromatograms of the extracts were compared to that of standard furfural. Furfural was only detected in CPO. The CPO consignments obtained from four mills were shown to contain 7.54 to 20.60mg/kg furfural. Copyright © 2011 Elsevier Ltd. All rights reserved.

Development of an acetic acid tolerant Spathaspora passalidarum strain through evolutionary engineering with resistance to inhibitors compounds of autohydrolysate of Eucalyptus globulus

DEFF Research Database (Denmark)

Morales, Paulina; Gentina, Juan Carlos; Aroca, German

2017-01-01

-fold higher than those obtained with the native strain, respectively. Inhibitors composition present inEucalyptus globulus autohydrolysate were (g L−1): acetic acid, 4.7; furfural, 1.0; HMF, 0.36; formic acid, 0.6;syringaldehyde, 0.14 and vanillin, 0.017. When Eucalyptus globulus autohydrolysate...

Influence of Biomass Pretreatment Process Time on Furfural Extraction from Birch Wood

Science.gov (United States)

Brazdausks, Prans; Puke, Maris; Vedernikovs, Nikolajs; Kruma, Irena

2013-12-01

Furfural is a biomass derived-chemical that can be used to replace petrochemicals. In this study, dilute sulphuric acid hydrolysis was used for hemicelluloses secession from birch wood. The reaction was investigated at different biomass treatment times (10-90 min, increasing it by 10 min). We found that the greatest amount of furfural 1.4-2.6%, which is 9.7-17.7% from theoretical possible yield, was formed in the first 30 min of the beginning of birch wood pentoses monosaccharide dehydration, but the greatest yield of furfural 10.3%, which is 70.0% from the theoretical yield, can be obtained after 90 min. Given that furfural yield generally does not exceed 50% from the theoretical amount, the result can be considered as very good.

Quantitative analysis of 2-furfural and 5-methylfurfural in different Italian vinegars by headspace solid-phase microextraction coupled to gas chromatography-mass spectrometry using isotope dilution.

Science.gov (United States)

Giordano, Lucia; Calabrese, Roberto; Davoli, Enrico; Rotilio, Domenico

2003-10-31

A new method was developed for the determination of 2-furfural (2-F) and 5-methylfurfural (5-MF), two products of Maillard reaction in vinegar, with head-space solid-phase microextraction (HS-SPME) coupled to gas chromatography-mass spectrometry (GC-MS). A divinylbenzene (DVB)/carboxen (CAR)/polydimethylsiloxane (PDMS) fibre was used and SPME conditions were optimised, studying ionic strength effect, temperature effect and adsorption time. Both analytes were determined by calibration established on 2-furfural-d4 (2-F-d4). The method showed good linearity in the range studied (from 16 to 0.12 mg/l), with a regression coefficient r2 of 0.9999. Inter-batch precision and accuracy were found between 14.9 and 6.0% and between -11.7 and 0.2%, respectively. Detection limit was 15 microg/l. The method is simple and accurate and it has been applied to a series of balsamic and non-balsamic vinegars.

Nanoporous Cu–Al–Co Alloys for Selective Furfural Hydrodeoxygenation to 2-Methylfuran

Energy Technology Data Exchange (ETDEWEB)

Hutchings, Gregory S.; Luc, Wesley; Lu, Qi; Zhou, Yang; Vlachos, Dionisios G.; Jiao, Feng (Delaware)

2017-03-17

By finding new catalysts for selective and efficient conversion of biomass-derived products to industrially relevant chemicals and fuels, a transition from fossil fuel feedstocks may be achieved. Furfural (C₅H₄O₂) is a platform chemical which may be converted to multiple heterocyclic and ring-opening products, but to date there have been few catalysts which enable selective hydrodeoxygenation to 2-methylfuran (2-MF, C₅H₆O). Here, we present a self-supported nanoporous Cu–Al–Co ternary alloy catalyst with high furfural HDO activity toward 2-MF, achieving up to 66.0% selectivity and 98.2% overall conversion at 513 K with only a ~5 atomic % Co composition. Some further analysis over multiple temperature conditions and nominal Co concentrations was performed to examine optimal conditions and tune catalyst performance, and operando X-ray absorption spectroscopy experiments were conducted to elucidate the structure of the catalyst in the reaction environment.

Characterization of products from hydrothermal carbonization of pine.

Science.gov (United States)

Wu, Qiong; Yu, Shitao; Hao, Naijia; Wells, Tyrone; Meng, Xianzhi; Li, Mi; Pu, Yunqiao; Liu, Shouxin; Ragauskas, Arthur J

2017-11-01

This study aims to reveal the structural features and reaction pathways for solid-liquid products from hydrothermal carbonization of Loblolly pine, where the solid products can be used as catalysts, adsorbents and electrode materials while liquid products can be treated yielding fuels and platform chemicals. Results revealed when treated at 240°C, cellulose and hemicellulose were degraded, in part, to 5-hydroxy-methyl furfural and furfural which were further transformed to aromatic structures via ring opening and Diels Alder reactions. Lignin degradation and formation of carbon-carbon bonds, forming aromatic motifs in the presence of furanic compounds connected via aliphatic bridges, ether or condensation reactions. After hydrothermal treatment, condensed aromatic carbon materials with methoxy groups were recovered with high fixed carbon content and HHV. The recovered liquid products are lignin-like value-added chemicals consisting of furfural and polyaromatic structure with alkanes and carboxyl, their total hydroxyl group content decreased when increasing reaction time. Copyright © 2017 Elsevier Ltd. All rights reserved.

Determination of the suitability of certain deciduous species for production of furfural and charcoal

Energy Technology Data Exchange (ETDEWEB)

Piotrowski, P.

1979-01-01

Determination of the suitability of chips of certain deciduous species for production of furfural and charcoal is discussed. The results of determination of suitability of unpeeled chips from cut branches (beech, birch, alder) and oak chips from wastes of production of furfural and also the suitability of cellolignin obtained from these chips for the production of charcoal are cited. An industrial unit of Swedish make equipped with a continuous hydrolyzer was used in hydrolysis tests of the deciduous chips. Unstripped birch, beech, and alder chips and oak chips from the wastes of wood processing contained 17-20 percent pentozanes and are suitable for industrial production of furfural. The content of substances soluble in an alcohol-benzene mixture in cellolignin from this feedstock was 21.1-30.5 percent. The amount of cellolignin obtained from chips of these species satisfied the demands of charcoal production. The charcoal yield was approximately 20 percent relative to the dry mass of carbonized cellolignin.

Hidrolisis Ampas Tebu dengan Katalisator Asam Asetat untuk Memproduksi Furfural menggunakan Metode Steam Stripping

Directory of Open Access Journals (Sweden)

Nita Listiani

2016-12-01

Full Text Available Proses hidrolisis ampas tebu menggunakan asam asetat sebagai katalis dengan metode satu tahap (steam stripping telah dilakukan. Ampas tebu sebanyak 50 gram dihidrolisis dalam 500 ml akuades yang mengandung katalis asam asetat sebesar 2 - 6% dengan variabel waktu selama 1 - 3 jam dan temperatur hidrolisis 110 - 120oC menggunakan metode steam stripping. Metode konvensional dilakukan dalam dua tahap yaitu pemasakan dan pemisahan dalam waktu tinggal tertentu, sehingga dapat menyebabkan degradasi furfural. Selain itu, energi yang digunakan sangat besar karena ada energi yang terbuang saat pendinginan produk. Maka peneliti mengembangkan proses hidrolisis hemiselulosa menjadi furfural sekaligus juga proses pemisahan yang dilakukan secara serempak dalam satu tahap yaitu dengan menggunakan metode distilasi steam stripping. Penelitian ini ditujukan untuk melihat apakah metode steam stripping dengan menggunakan katalis asam asetat efektif untuk digunakan dalam memproduksi furfural. Dalam studi ini juga dipelajari pengaruh waktu hidrolisis, konsentrasi katalis, dan  temperatur terhadap konsentrasi furfural. Hasil uji menggunakan Response Surface Methodology (RSM menunjukkan bahwa variabel yang paling berpengaruh untuk perolehan furfural adalah konsentrasi katalis dan temperatur. Hasil penelitian menunjukkan optimum dengan perolehan konsentrasi furfural tertinggi (6,038 mg/ml di peroleh pada waktu 3 jam, temperatur 120°C, dan konsentrasi katalis 6%. Hasil penelitian menunjukkan bahwa metode ini efektif untuk digunakan dalam produksi furfural.

Diagnosis of aging deterioration of oil filled transformers by detection of furfural dissolved in insulating oil. Furfural ni yoru aburairi hen prime atsuki no keinen rekkado shindan no kenkyu

Energy Technology Data Exchange (ETDEWEB)

Harigae, T.; Goto, K.; Ota, N.; Tsukioka, H. (Yuka Industries, Co. Ltd., Tokyo (Japan))

1992-06-20

The diagnosis method of aging deterioration was proposed for oil filled transformers based on detection of furfural in insulating oil. Vacuum, oxygen-added and water-added specimens of insulating paper immersed in insulating oil were thermally deteriorated at 120-180 {degree}C for 1-120 days to measure average polymerization degrees of the insulating paper and furfural contents in the oil and paper. As a result, the addition of oxygen or water accelerated forming of furfural, and the average polymerization degree considerably decreased in the early stage of heating. There was also the certain relation between the furfural content and average polymerization degree. In addition, various kinds of subjects were discussed which were required to apply these experimental results to diagnosis of aging deterioration in real oil filled transformers, and rough furfural contents corresponding to aging deterioration degrees of the insulating paper were given. As combined with a CO{sub 2} + CO method, the proposed method was expected to be more reliable. 9 refs., 8 figs., 2 tabs.

Selective Hydrogenation of Furfural to Furfuryl Alcohol in the Presence of a Recyclable Cobalt/SBA-15 Catalyst.

Science.gov (United States)

Audemar, Maïté; Ciotonea, Carmen; De Oliveira Vigier, Karine; Royer, Sébastien; Ungureanu, Adrian; Dragoi, Brindusa; Dumitriu, Emil; Jérôme, François

2015-06-08

The hydrogenation of furfural to furfuryl alcohol was performed in the presence of a Co/SBA-15 catalyst. High selectivity (96 %) at a conversion higher than 95 % is reported over this catalytic system. As the conversion of furfural to furfuryl alcohol occurs over metallic Co sites, the effect of reduction temperature, H2 pressure, and reaction temperature were studied. Optimum reaction conditions were: 150 °C, 1.5 h, 2.0 MPa of H2 . The catalyst was recyclable, and furfuryl alcohol was recovered with a purity higher than 90 %. The effect of the solvent concentration was also studied. With a minimum of 50 wt % of solvent, the selectivity to furfuryl alcohol and the conversion of furfural remained high (both over 80 %). Likewise, the activity of the catalyst is maintained even in pure furfural, which confirms the real potential of the proposed catalytic system. This catalyst was also used in the hydrogenation of levulinic acid to produce γ-valerolactone selectively. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

[Adsorption mechanism of furfural onto modified rice husk charcoals].

Science.gov (United States)

Deng, Yong; Wang, Xianhua; Li, Yunchao; Shao, Jing'ai; Yang, Haiping; Chen, Hanping

2015-10-01

To evaluate the absorptive characteristics of furfural onto biomass charcoals derived from rice husk pyrolysis, we studied the information of the structure and surface chemistry properties of the rice husk charcoals modified by thermal treatment under nitrogen and carbon dioxide flow and adsorption mechanism of furfural. The modified samples are labeled as RH-N2 and RH-CO2. Fresh rice husk charcoal sample (RH-450) and modified samples were characterized by elemental analysis, nitrogen adsorption-desorption isotherms, Fourier-transform infrared spectroscopy and Boehm titration. The results show that fresh rice husk charcoal obtained at 450 degrees C had a large number of organic groups on its surface and poor pore structure. After the modification under nitrogen and carbon dioxide flow, oxygenic organics in rice husk charcoals decompose further, leading to the reduction of acidic functional groups on charcoals surface, and the increase of the pyrone structures of the basic groups. Meanwhile, pore structure was improved significantly and the surface area was increased, especially for the micropores. This resulted in the increase of π-π dispersion between the surfaces of rice husk charcoals and furfural molecular. With making comprehensive consideration of π-π dispersion and pore structure, the best removal efficiency of furfural was obtained by rice husk charcoal modified under carbon dioxide flow.

Furfural - da biomassa ao laboratório de química orgânica

Directory of Open Access Journals (Sweden)

Paulo Roberto Ribeiro

2012-01-01

Full Text Available The goal of this manuscript is provide to students of Chemistry and related areas an alternative experiment in which they can obtain a compound and learn to observe and interpret properties and predict organic structure by obtaining furfural from biomass. Furfural is an organic compound, obtained through acid hydrolysis of pentosans, commonly used in the chemical and pharmaceutical industries. Students are guided to get furfural through extractive procedures and chemical reactions adapted to semi-micro laboratory scale. Characterization of furfural was done by chemical tests and physical properties. Identification was accomplished by a series of spectroscopic and spectrometric techniques.

Kinetics of browning, phenolics, and 5-hydroxymethylfurfural in commercial sparkling wines.

Science.gov (United States)

Serra-Cayuela, A; Jourdes, M; Riu-Aumatell, M; Buxaderas, S; Teissedre, P-L; López-Tamames, E

2014-02-05

We analyzed the degree of browning (absorbance at 420 nm), the phenolics, and the 5-hydroxymethylfurfural (5-HMF) content in six sparkling wines series kept at three temperatures (4, 16, and 20 °C) for over 2 years. Caffeic acid, trans-coutaric acid, p-coumaric acid, and 5-HMF were the compounds with the greatest correlation with browning and time. 5-HMF was the only compound that evolved linearly at all temperatures. We propose that 5-HMF is a better time-temperature marker than the A₄₂₀ parameter or phenolics, because it shows higher linearity with time at all temperatures, is more sensitive to temperature changes, and has lower variability. The kinetics of 5-HMF was studied showing a zero-order behavior. We propose mathematical models that wineries can use to predict the browning shelf life of their sparkling wines as a function of the storage time and temperature.

Photocatalytic degradation of furfural in aqueous solution by N-doped titanium dioxide nanoparticles.

Science.gov (United States)

Veisi, Farzaneh; Zazouli, Mohammad Ali; Ebrahimzadeh, Mohammad Ali; Charati, Jamshid Yazdani; Dezfoli, Amin Shiralizadeh

2016-11-01

The photocatalytic degradation of furfural in aqueous solution was investigated using N-doped titanium dioxide nanoparticles under sunlight and ultraviolet radiation (N-TiO 2 /Sun and N-TiO 2 /UV) in a lab-scale batch photoreactor. The N-TiO 2 nanoparticles prepared using a sol-gel method were characterized using XRD, X-ray photoelectron spectroscopy (XPS), and SEM analyses. Using HPLC to monitor the furfural concentration, the effect of catalyst dosage, contact time, initial solution pH, initial furfural concentration, and sunlight or ultraviolet radiation on the degradation efficiency was studied. The efficiency of furfural removal was found to increase with increased reaction time, nanoparticle loading, and pH for both processes, whereas the efficiency decreased with increased furfural concentration. The maximum removal efficiencies for the N-TiO 2 /UV and N-TiO 2 /Sun processes were 97 and 78 %, respectively, whereas the mean removal efficiencies were 80.71 ± 2.08 % and 62.85 ± 2.41 %, respectively. In general, the degradation and elimination rate of furfural using the N-TiO 2 /UV process was higher than that using the N-TiO 2 /Sun process.

Using of catalytic effect of Mo(VI) on mutual metamorphosis o 2-ketoses and 2-C-(hydroxymethyl)aldoses

International Nuclear Information System (INIS)

Hricoviniova, Z.; Petrus, L.

1999-01-01

Influence of catalytic effect of the Mo(VI) was studied after mutual metamorphosis of two groups of saccharides: 2-ketoses and 2-C-(hydroxymethyl)aldoses. Metamorphosis is connected with change of configuration at the atom neighbouring with the carbonyl group of the saccharide. The mechanism of stereospecific transformation of 2-ketoses on 2-C-(hydroxymethyl)aldose was studied with 13 C-isotopic substituted 2-ketoses.It was confirmed that it is intramolecular process. This reaction was studied on pentuloses, hexuloses, heptuloses as well as on responsive 2-C-(hydroxymethyl)aldoses

Production of mutants of Candida utilis with increased resistence against furfural

International Nuclear Information System (INIS)

Stehlik, G.; Baron, M.; Turanitz, K.; Schneider, F.

1978-01-01

By repeated γ-irradiation treatments and following selections a mutant of Candida utilis weissenbachii was isolated showing increased resistance against furfural as compared to its wild type. Growing and radiation survival behavior of these yeasts are compared. Analysis of furfural was done by gaschromatography on Porapak Q. (author)

Excitation of vibrational quanta in furfural by intermediate-energy electrons

Science.gov (United States)

Jones, D. B.; Neves, R. F. C.; Lopes, M. C. A.; da Costa, R. F.; Varella, M. T. do N.; Bettega, M. H. F.; Lima, M. A. P.; García, G.; Blanco, F.; Brunger, M. J.

2015-12-01

We report cross sections for electron-impact excitation of vibrational quanta in furfural, at intermediate incident electron energies (20, 30, and 40 eV). The present differential cross sections are measured over the scattered electron angular range 10°-90°, with corresponding integral cross sections subsequently being determined. Furfural is a viable plant-derived alternative to petrochemicals, being produced via low-temperature plasma treatment of biomass. Current yields, however, need to be significantly improved, possibly through modelling, with the present cross sections being an important component of such simulations. To the best of our knowledge, there are no other cross sections for vibrational excitation of furfural available in the literature, so the present data are valuable for this important molecule.

Excitation of vibrational quanta in furfural by intermediate-energy electrons

Energy Technology Data Exchange (ETDEWEB)

Jones, D. B. [School of Chemical and Physical Sciences, Flinders University, GPO Box 2100, Adelaide, South Australia 5001 (Australia); Neves, R. F. C. [School of Chemical and Physical Sciences, Flinders University, GPO Box 2100, Adelaide, South Australia 5001 (Australia); Instituto Federal do Sul de Minas Gerais, Campus Poços de Caldas, Minas Gerais (Brazil); Departamento de Física, Universidade Federal de Juiz de Fora, 36036-900, Juiz de Fora, MG (Brazil); Lopes, M. C. A. [Departamento de Física, Universidade Federal de Juiz de Fora, 36036-900, Juiz de Fora, MG (Brazil); Costa, R. F. da [Instituto de Física “Gleb Wataghin,” Universidade Estadual de Campinas, Campinas, 13083-859 São Paulo (Brazil); Centro de Ciências Naturais e Humanas, Universidade Federal do ABC, Santo André, 09210-580 São Paulo (Brazil); Varella, M. T. do N. [Instituto de Física, Universidade de São Paulo, CP 66318, 05315-970 São Paulo, São Paulo (Brazil); Bettega, M. H. F. [Departamento de Física, Universidade Federal do Paraná, CP 19044, 81531-990 Curitiba, Paraná (Brazil); Lima, M. A. P. [Instituto de Física “Gleb Wataghin,” Universidade Estadual de Campinas, Campinas, 13083-859 São Paulo (Brazil); García, G. [Instituto de Física Fundamental, CSIC, Serrano 113-bis, 28006 Madrid (Spain); and others

2015-12-14

We report cross sections for electron-impact excitation of vibrational quanta in furfural, at intermediate incident electron energies (20, 30, and 40 eV). The present differential cross sections are measured over the scattered electron angular range 10°–90°, with corresponding integral cross sections subsequently being determined. Furfural is a viable plant-derived alternative to petrochemicals, being produced via low-temperature plasma treatment of biomass. Current yields, however, need to be significantly improved, possibly through modelling, with the present cross sections being an important component of such simulations. To the best of our knowledge, there are no other cross sections for vibrational excitation of furfural available in the literature, so the present data are valuable for this important molecule.

Excitation of vibrational quanta in furfural by intermediate-energy electrons

International Nuclear Information System (INIS)

Jones, D. B.; Neves, R. F. C.; Lopes, M. C. A.; Costa, R. F. da; Varella, M. T. do N.; Bettega, M. H. F.; Lima, M. A. P.; García, G.

2015-01-01

We report cross sections for electron-impact excitation of vibrational quanta in furfural, at intermediate incident electron energies (20, 30, and 40 eV). The present differential cross sections are measured over the scattered electron angular range 10°–90°, with corresponding integral cross sections subsequently being determined. Furfural is a viable plant-derived alternative to petrochemicals, being produced via low-temperature plasma treatment of biomass. Current yields, however, need to be significantly improved, possibly through modelling, with the present cross sections being an important component of such simulations. To the best of our knowledge, there are no other cross sections for vibrational excitation of furfural available in the literature, so the present data are valuable for this important molecule

Enhanced Furfural Yields from Xylose Dehydration in the gamma-Valerolactone/Water Solvent System at Elevated Temperatures.

Science.gov (United States)

Sener, Canan; Motagamwala, Ali Hussain; Alonso, David Martin; Dumesic, James

2018-05-18

High yields of furfural (>90%) were achieved from xylose dehydration in a sustainable solvent system composed of -valerolactone (GVL), a biomass derived solvent, and water. It is identified that high reaction temperatures (e.g., 498 K) are required to achieve high furfural yield. Additionally, it is shown that the furfural yield at these temperatures is independent of the initial xylose concentration, and high furfural yield is obtained for industrially relevant xylose concentrations (10 wt%). A reaction kinetics model is developed to describe the experimental data obtained with solvent system composed of 80 wt% GVL and 20 wt% water across the range of reaction conditions studied (473 - 523 K, 1-10 mM acid catalyst, 66 - 660 mM xylose concentration). The kinetic model demonstrates that furfural loss due to bimolecular condensation of xylose and furfural is minimized at elevated temperature, whereas carbon loss due to xylose degradation increases with increasing temperature. Accordingly, the optimal temperature range for xylose dehydration to furfural in the GVL/H2O solvent system is identified to be from 480 to 500 K. Under these reaction conditions, furfural yield of 93% is achieved at 97% xylan conversion from lignocellulosic biomass (maple wood). © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Synthesis of unsaturated diethers 7,8- and 7,9-di(hydroxymethyl)decahydro-7,8- and 7,9-dicarba-nido-undecaborates(1-)

International Nuclear Information System (INIS)

Solomatina, A.I.; Komarova, L.G.; Rusanov, A.L.

1995-01-01

Dicarba-nido-undecaborate(1-) anions were obtained by treatment of diallyl ether of the 1,2-di(hydroxymethyl)-1,2-dicarba-closo-dodecaborane(12), 1,2-di(hydroxymethyl)-1,2-dicarba-closo-dodecaborane(12) and 1,7-di(hydroxymethyl)-1,7-dicarba-closo-dodecaborane(12) with ethanolic potassium hydroxide and subsequent interaction of the products with cesium and tetramethylammonium chlorides. 8 refs

Single and combined effects of acetic acid, furfural, and sugars on the growth of the pentose-fermenting yeast Meyerozyma guilliermondii.

Science.gov (United States)

Perna, Michelle Dos Santos Cordeiro; Bastos, Reinaldo Gaspar; Ceccato-Antonini, Sandra Regina

2018-02-01

The tolerance of the pentose-fermenting yeast Meyerozyma guilliermondii to the inhibitors released after the biomass hydrolysis, such as acetic acid and furfural, was surveyed. We first verified the effects of acetic acid and cell concentrations and initial pH on the growth of a M. guilliermondii strain in a semi-synthetic medium containing acetic acid as the sole carbon source. Second, the single and combined effects of furfural, acetic acid, and sugars (xylose, arabinose, and glucose) on the sugar uptake, cell growth, and ethanol production were also analysed. Growth inhibition occurred in concentrations higher than 10.5 g l -1 acetic acid and initial pH 3.5. The maximum specific growth rate (µ) was 0.023 h -1 and the saturation constant (ks) was 0.75 g l -1 acetic acid. Initial cell concentration also influenced µ. Acetic acid (initial concentration 5 g l -1 ) was co-consumed with sugars even in the presence of 20 mg l -1 furfural without inhibition to the yeast growth. The yeast grew and fermented sugars in a sugar-based medium with acetic acid and furfural in concentrations much higher than those usually found in hemicellulosic hydrolysates.

Thermal stability of phytochemicals, HMF and antioxidant activity in cape gooseberry (Physalis peruviana L.)

NARCIS (Netherlands)

Olivares-Tenorio, Mary Luz; Verkerk, Ruud; Boekel, van Tiny; Dekker, Matthijs

2017-01-01

Cape gooseberry is a fruit recognised for having relevant contents of health-promoting compounds. Changes in the content of phytochemicals (ascorbic acid, β-carotene, catechin and epicatechin), hydroxymethylfurfural (HMF) and antioxidant activity of this fruit were studied at various temperatures

Hydrothermal pentose to furfural conversion and simultaneous extraction with SC-CO2--kinetics and application to biomass hydrolysates.

Science.gov (United States)

Gairola, Krishan; Smirnova, Irina

2012-11-01

This work explores hydrothermal d-xylose and hemicellulose to furfural conversion coupled with simultaneous furfural extraction by SC-CO(2) and the underlying reaction pathway. A maximum furfural yield of 68% was attained from d-xylose at 230°C and 12MPa. Additionally missing kinetic data for l-arabinose to furfural conversion was provided, showing close similarity to d-xylose. Furfural yields from straw and brewery waste hydrolysates were significantly lower than those obtained from model compounds, indicating side reactions with other hydrolysate components. Simultaneous furfural extraction by SC-CO(2) significantly increased extraction yield in all cases. The results indicate that furfural reacts with intermediates of pentose dehydration. The proposed processing route can be well integrated into existing lignocellulose biorefinery concepts. Copyright © 2012 Elsevier Ltd. All rights reserved.

Catalytic Transfer Hydrogenation of Furfural to Furfuryl Alcohol with Recyclable Al-Zr@Fe Mixed Oxides

DEFF Research Database (Denmark)

He, Jian; Li, Hu; Riisager, Anders

2017-01-01

A series of magnetic, acid/base bifunctional Al–Zr@Fe3O4 catalysts were successfully prepared by a facile coprecipitation method and utilized in the catalytic transfer hydrogenation (CTH) of furfural to furfuryl alcohol with 2-propanol as hydrogen source. The physicochemical properties and morpho......A series of magnetic, acid/base bifunctional Al–Zr@Fe3O4 catalysts were successfully prepared by a facile coprecipitation method and utilized in the catalytic transfer hydrogenation (CTH) of furfural to furfuryl alcohol with 2-propanol as hydrogen source. The physicochemical properties...... with a Al3+/Zr4+/Fe3O4 molar ratio of 21:9:3 was found to exhibit a high furfuryl alcohol yield of 90.5 % in the CTH from furfural at 180 °C after 4 h with a comparatively low activation energy of 45.3 kJ mol−1, as calculated from the Arrhenius equation. Moreover, leaching and recyclability tests confirmed...

Desorption of Furfural from Bimetallic Pt-Fe Oxides/Alumina Catalysts

OpenAIRE

Gloria Lourdes Dimas-Rivera; Javier Rivera de la Rosa; Carlos J. Lucio-Ortiz; José Antonio De los Reyes Heredia; Virgilio González González; Tomás Hernández

2014-01-01

In this work, the desorption of furfural, which is a competitive intermediate during the production of biofuel and valuable aromatic compounds, was studied using pure alumina, as well as alumina impregnated with iron and platinum oxides both individually and in combination, using thermogravimetric analysis (TGA). The bimetallic sample exhibited the lowest desorption percentage for furfural. High-resolution transmission electron microscopy (HRTEM) imaging revealed the intimate connection betwe...

Polymeric reaction between aldehyde group in furfural and phenolic derivatives from liquefaction of oil palm empty fruit bunch fiber as phenol-furfural resin

Science.gov (United States)

Masli, M. Z.; Zakaria, S.; Chia, C. H.; Roslan, R.

2016-11-01

Resinification of liquefied empty fruit bunch with furfural (LEFB-Fu) was performed. During the resinification process, the samples were taken every hour up to 4 hours. FTIR analysis of the samples was conducted to understand the progress of the reaction. It showed that the bands of 1512 cm-1 and 1692 cm-1 evolving and diminishing respectively, indicating the consumption of furfural. The postulation of polymerization was also proven as the increasing extent of substitution of aromatic ring observed.

Study on the preparation of furfural from rice hull

Energy Technology Data Exchange (ETDEWEB)

Lu, M.F; Li, P.H.

1980-01-01

Furfural (I) was prepared from rice hull by digestion with HCl, H/sub 2/SO4, or H/sub 3/PO4. I formation in the presence of 5N HCl (the optimum concentration) increased with increasing time of digestion up to 5 hours and then decreased. The optimum concentration and time with H/sub 2/SO4 were the same, but digestion with H/sub 3/PO4 was neither concentration nor time dependent. Under optimal conditions, I formation was highest in digestion with HCl.

Active vs. spectator modes in nonadiabatic photodissociation dynamics of the hydroxymethyl radical via the 22A(3s) Rydberg state

Science.gov (United States)

Xie, Changjian; Guo, Hua

2018-01-01

The choice of the active degrees of freedom (DOFs) is a pivotal issue in a reduced-dimensional model of quantum dynamics when a full-dimensional one is not feasible. Here, several five-dimensional (5D) models are used to investigate the nonadiabatic photodissociation dynamics of the hydroxymethyl (CH2OH) radical, which possesses nine internal DOFs, in its lowest absorption band. A normal-mode based scheme is used to identify the active and spectator modes, and its predictions are confirmed by 5D quantum dynamical calculations. Our results underscore the important role of the CO stretching mode in the photodissociation dynamics of CH2OH, originating from the photo-induced promotion of an electron from the half-occupied π*CO antibonding orbital to a carbon Rydberg orbital.

Improving furfural tolerance of Zymomonas mobilis by rewiring a sigma factor RpoD protein.

Science.gov (United States)

Tan, Fu-Rong; Dai, Li-Chun; Wu, Bo; Qin, Han; Shui, Zong-Xia; Wang, Jing-Li; Zhu, Qi-Li; Hu, Qi-Chun; Ruan, Zhi-Yong; He, Ming-Xiong

2015-06-01

Furfural from lignocellulosic hydrolysates is the key inhibitor for bio-ethanol fermentation. In this study, we report a strategy of improving the furfural tolerance in Zymomonas mobilis on the transcriptional level by engineering its global transcription sigma factor (σ(70), RpoD) protein. Three furfural tolerance RpoD mutants (ZM4-MF1, ZM4-MF2, and ZM4-MF3) were identified from error-prone PCR libraries. The best furfural-tolerance strain ZM4-MF2 reached to the maximal cell density (OD600) about 2.0 after approximately 30 h, while control strain ZM4-rpoD reached its highest cell density of about 1.3 under the same conditions. ZM4-MF2 also consumed glucose faster and yield higher ethanol; expression levels and key Entner-Doudoroff (ED) pathway enzymatic activities were also compared to control strain under furfural stress condition. Our results suggest that global transcription machinery engineering could potentially be used to improve stress tolerance and ethanol production in Z. mobilis.

On the Diels-Alder approach to solely biomass-derived polyethylene terephthalate (PET): conversion of 2,5-dimethylfuran and acrolein into p-xylene.

Science.gov (United States)

Shiramizu, Mika; Toste, F Dean

2011-10-24

Polyethylene terephthalate (PET) is a polymeric material with high global demand. Conventionally, PET is produced from fossil-fuel-based materials. Herein, we explored the feasibility of a sustainable method for PET production by using solely bio-renewable resources. Specifically, 2,5-dimethylfuran (derived from lignocellulosic biomass through 5-(hydroxymethyl)furfural) and acrolein (produced from glycerol, a side product of biodiesel production) were converted into the key intermediate p-xylene (a precursor of terephthalic acid). This synthesis consists of a sequential Diels-Alder reaction, oxidation, dehydration, and decarboxylation. In particular, the pivotal first step, the Diels-Alder reaction, was studied in detail to provide useful kinetic and thermodynamic data. Although it was found that this reaction requires low temperature to proceed efficiently, which presents a limitation on economic feasibility on an industrial scale, the concept was realized and bio-derived p-xylene was obtained in 34% overall yield over four steps. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Solution enthalpy of potassium iodide in furfural and its mixtures with dimethylsulfoxide

International Nuclear Information System (INIS)

Vlasenko, K.K.; Belov, A.A.; Vorob'ev, A.F.

1986-01-01

Solution enthalpy of potassium iodide in furfural-dimethylsulfoxide mixtures at 298.15 K and furfural concentration 17.3-100% are determined experimentally. K + and I - ion solvate shell composition, which in the general case doesn't correspond to the mixed solvent composition, is calculated

Effects of furfural on the respiratory metabolism of Saccharomyces cerevisiae in glucose-limited chemostats,

OpenAIRE

Sarvari Horvath, I; Franzén, C J; Taherzadeh, M J; Niklasson, C; Lidén, Gunnar

2003-01-01

Effects of furfural on the aerobic metabolism of the yeast Saccharomyces cerevisiae were studied by performing chemostat experiments, and the kinetics of furfural conversion was analyzed by performing dynamic experiments. Furfural, an important inhibitor present in lignocellulosic hydrolysates, was shown to have an inhibitory effect on yeast cells growing respiratively which was much greater than the inhibitory effect previously observed for anaerobically growing yeast cells. The residual fur...

Xylitol production from waste xylose mother liquor containing miscellaneous sugars and inhibitors: one-pot biotransformation by Candida tropicalis and recombinant Bacillus subtilis.

Science.gov (United States)

Wang, Hengwei; Li, Lijuan; Zhang, Lebin; An, Jin; Cheng, Hairong; Deng, Zixin

2016-05-16

The process of industrial xylitol production is a massive source of organic pollutants, such as waste xylose mother liquor (WXML), a viscous reddish-brown liquid. Currently, WXML is difficult to reuse due to its miscellaneous low-cost sugars, high content of inhibitors and complex composition. WXML, as an organic pollutant of hemicellulosic hydrolysates, accumulates and has become an issue of industrial concern in China. Previous studies have focused only on the catalysis of xylose in the hydrolysates into xylitol using one strain, without considering the removal of other miscellaneous sugars, thus creating an obstacle to subsequent large-scale purification. In the present study, we aimed to develop a simple one-pot biotransformation to produce high-purity xylitol from WXML to improve its economic value. In the present study, we developed a procedure to produce xylitol from WXML, which combines detoxification, biotransformation and removal of by-product sugars (purification) in one bioreactor using two complementary strains, Candida tropicalis X828 and Bacillus subtilis Bs12. At the first stage of micro-aerobic biotransformation, the yeast cells were allowed to grow and metabolized glucose and the inhibitors furfural and hydroxymethyl furfural (HMF), and converted xylose into xylitol. At the second stage of aerobic biotransformation, B. subtilis Bs12 was activated and depleted the by-product sugars. The one-pot process was successfully scaled up from shake flasks to 5, 150 L and 30 m(3) bioreactors. Approximately 95 g/L of pure xylitol could be obtained from the medium containing 400 g/L of WXML at a yield of 0.75 g/g xylose consumed, and the by-product sugars glucose, L-arabinose and galactose were depleted simultaneously. Our results demonstrate that the one-pot procedure is a viable option for the industrial application of WXML to produce value-added chemicals. The integration of complementary strains in the biotransformation of hemicellulosic hydrolysates is

Wet explosion pretreatment of sugarcane bagasse for enhanced enzymatic hydrolysis

DEFF Research Database (Denmark)

Biswas, Rajib; Uellendahl, Hinrich; Ahring, Birgitte Kiær

2014-01-01

.7% of the theoretical maximum value. Pretreatment at 200 C with oxygen exhibited enhanced enzymatic efficiency but lower xylose recovery and formation of the degradation products such as acetate, furfural and HMF of 7.6, 3.3 and 1.0 g/L, respectively. In the hydrolysis, the total sugars (glucose + xylose) yielded...

Furfural production from fruit shells by acid-catalyzed hydrolysis

Energy Technology Data Exchange (ETDEWEB)

Demirbas, A. [Selcuk Univ., Konya (Turkey). Dept. of Chemical Engineering

2006-01-21

Pentosans are hydrolyzed to pentoses by dilute mineral acid hydrolysis. The main source of pentosans is hemicelluloses. Furfural can be produced by the acid hydrolysis of pentosan from fruit shells such as hazelnut, sunflower, walnut, and almond of agricultural wastes. Further dehydration reactions of the pentoses yield furfural. The hydrolysis of each shell sample was carried out in dilute sulfuric acid (0.05 to 0.200 mol/l), at high temperature (450-525 K), and short reaction times (from 30 to 600 s). (author)

Rapid and sensitive liquid chromatography–tandem mass spectrometric method for the quantitative determination of potentially harmful substance 5,5′-oxydimethylenebis (2-furfural in traditional Chinese medicine injections

Directory of Open Access Journals (Sweden)

Qingce Zang

2018-03-01

Full Text Available With the rapid development and wide application of traditional Chinese medicine injection (TCMI, a number of adverse events of some TCMIs have incessantly been reported and have drawn broad attention in recent years. Establishing effective and practical analytical methods for safety evaluation and quality control of TCMI can help to improve the safety of TCMIs in clinical applications. In this study, a sensitive and rapid high-performance liquid chromatography–tandem mass spectrometry (HPLC–MS/MS method has been developed and validated for the quantitative determination of potentially harmful substance 5,5′-oxydimethylenebis (2-furfural, OMBF in TCMI samples. Chromatographic separation was performed on a C18 reversed-phase column (150 mm × 2.1 mm, 5 µm by gradient elution, using methanol–water containing 0.1% formic acid as mobile phase at the flow rate of 0.3 mL/min. MS/MS detection was performed on a triple quadrupole mass spectrometer with positive electrospray ionization in the multiple reaction-monitoring mode. The method was sensitive with a limit of quantification of 0.3 ng/mL and linear over the range of 0.3–30 ng/mL (r=0.9998. Intra- and inter-day precision for analyte was <9.52% RSD with recoveries in the range 88.0–109.67% at three concentration levels. The validated method was successfully applied to quantitatively determine the compound OMBF in TCMIs and glucose injections. Our study indicates that this method is simple, sensitive, practicable and reliable, and could be applied for safety evaluation and quality control of TCMIs and glucose injections. KEY WORDS: 5,5′-Oxydimethylenebis (2-furfural, LC–MS/MS, Quantitative analytical method, Traditional Chinese medicine injection, Quality control

Removal of the Fermentation Inhibitor, Furfural, Using Activated Carbon in Cellulosic-Ethanol Production

KAUST Repository

Zhang, Kuang

2011-12-21

Ethanol can be produced from lignocellulosic biomass through fermentation; however, some byproducts from lignocellulosics, such as furfural compounds, are highly inhibitory to the fermentation and can substantially reduce the efficiency of ethanol production. In this study, commercial and polymer-derived activated carbons were utilized to selectively remove the model fermentation inhibitor, furfural, from water solution during bioethanol production. The oxygen functional groups on the carbon surface were found to influence the selectivity of sorbents between inhibitors and sugars during the separation. After inhibitors were selectively removed from the broth, the cell growth and ethanol production efficiency was recovered noticeably in the fermentation. A sorption/desorption cycle was designed, and the sorbents were regenerated in a fixed-bed column system using ethanol-containing standard solution. Dynamic mass balance was obtained after running four or five cycles, and regeneration results were stable even after twenty cycles. © 2011 American Chemical Society.

Ethanologenic bacteria with increased resistance to furfural

Science.gov (United States)

Miller, Elliot Norman; Jarboe, Laura R.; Yomano, Lorraine P.; York, Sean W.; Shanmugam, Keelnatham; Ingram, Lonnie O'Neal

2015-10-06

The invention relates to bacterium that have increased resistance to furfural and methods of preparation. The invention also relates to methods of producing ethanol using the bacterium and corresponding kits.

The effect of delignification process with alkaline peroxide on lactic acid production from furfural residues

Directory of Open Access Journals (Sweden)

Yong Tang

2012-11-01

Full Text Available Furfural residues produced from the furfural industry were investigated as a substrate for lactic acid production by simultaneous saccharification and fermentation (SSF. Alkaline peroxide was used for delignification of furfural residues to improve the final lactic acid concentration. The residue was treated with 1.3% to 1.7% hydrogen peroxide at 80 °C for 1 h with a substrate concentration of 3.33%. SSF of furfural residues with different delignification degrees were carried out to evaluate the effect of delignification degree on lactic acid production. Using corn hydrolysates/ furfural residues as substrates, SSF with different media were carried out to investigate the effect of lignin on the interaction between enzymes and lactic acid bacteria. Lactic acid bacteria had a negative effect on cellulase, thus resulting in the reduction of enzyme activity. Lignin and nutrients slowed down the decreasing trend of enzyme activity. A higher delignification resulted in a slower fermentation rate and lower yield due to degradation products of lignin and the effect of lignin on the interaction between enzymes and lactic acid bacteria. For the purpose of lactic acid production, a moderate delignification (furfural residues with the lignin content of 14.8% was optimum.

Enhancing the stability of copper chromite catalysts for the selective hydrogenation of furfural using ALD overcoating

Energy Technology Data Exchange (ETDEWEB)

Zhang, Hongbo; Lei, Yu; Kropf, A. Jeremy; Zhang, Guanghui; Elam, Jeffrey W.; Miller, Jeffrey T.; Sollberger, Fred; Ribeiro, Fabio; Akatay, M. Cem; Stach, Eric A.; Dumesic, James A.; Marshall, Christopher L.

2014-08-01

The stability of a gas-phase furfural hydrogenation catalyst (CuCr2O4 center dot CuO) was enhanced by depositing a thin Al2O3 layer using atomic layer deposition (ALD). Based on temperature-programed reduction (TPR) measurements, the reduction temperature of Cu was raised significantly, and the activation energy for furfural reduction was decreased following the ALD treatment. Thinner ALD layers yielded higher furfural hydrogenation activities. X-ray absorption fine structure (XAFS) spectroscopy studies indicated that Cu1+/Cu-0 are the active species for furfural reduction.

Proximal onychomycosis due to Malassezia furfur: a case report

Directory of Open Access Journals (Sweden)

Zareei M

2013-03-01

Full Text Available Background: The etiologic role of Malassezia furfur in onychomycosis, because of its controversial keratinolytic ability, has not been proven. The most reported cases are distal subungual onychomycosis (DSO. In our knowledge no cases of proximal onychomycosis (PO has been reported. For the first time we report proximal onychomycosis. This case report describes the isolation of Malassezia furfur from fingernails. Case presentation: An Iranian 56- year- old women had been referred to mycology lab with hyperkeratosis in proximal regions of right hand nails and clinical diagnosis of onychomycosis without paronychia in May 2012. She used several medicines for her cardiac disease, mental illness, severe stress and blood glucose fluctuation diseases. Scraping and sampling from nail lesions were done, budding yeast cells with broadband connections were observed in 15% KOH wet mounts. Also, other differentiation tests, consist of staining with methylen blue, cultures and biochemical tests were done. In order to rejecting the probable etiologic role of any dermatophytic or non-dermatophytic fungi in this case, samples were collected from other parts of the body by scotch tape and scraping with scalpel blade too, but the results of direct microscopy and culture were negative. Finally, Malassezia furfur was identified as the causative agent of onychomycosis.Conclusion: Despite failure to prove Malassezia furfur keratinolytic ability, it can be the etiologic agent of proximal onychomycosis that shows the aggressive properties of this species. Its clinical importance is the easier transmission to hospitalized patients and other people.

Microwave-Assisted Green Production of Furfural from D-xylose of Sugarcane Bagasse

Directory of Open Access Journals (Sweden)

Sílvio Vaz Jr.

2015-10-01

Full Text Available D-xylose is a component of sugarcane bagasse that can be used as a renewable resource for the production of a variety of chemicals. By means of catalytic reactions in an aqueous medium, it was determined that D-xylose can efficiently be converted into furfural by the application of microwave as a green synthetic methodology. The highest yields of furfural were obtained at a HCl concentration of 4 mg/mL. When the reaction was performed at 200 °C, an optimum yield of 64% of furfural was observed after 10 min of reaction time, with 95% of the D-xylose being converted.

Characteristics of the wood adhesion bonding mechanism using hydroxymethyl resorcinol

Science.gov (United States)

Douglas J. Gardner; Charles E. Frazier; Alfred W. Christiansen

2006-01-01

A recent collaborative effort among the U.S. Forest Products Laboratory, Virginia Tech, and the University of Maine has explored the possible bonding mechanisms contributing to durable wood adhesive bonding using hydroxymethyl resorcinol (HMR) surface treatment. Current adhesive bonding mechanisms include: mechanical interlocking, electronic or electrostatic theory,...

Synthesis and characterization of carbon cryogel microspheres from lignin-furfural mixtures for biodiesel production.

Science.gov (United States)

Zainol, Muzakkir Mohammad; Amin, Nor Aishah Saidina; Asmadi, Mohd

2015-08-01

The aim of this work was to study the potential of biofuel and biomass processing industry side-products as acid catalyst. The synthesis of carbon cryogel from lignin-furfural mixture, prepared via sol-gel polycondensation at 90°C for 0.5h, has been investigated for biodiesel production. The effect of lignin to furfural (L/F) ratios, lignin to water (L/W) ratios and acid concentration on carbon cryogel synthesis was studied. The carbon cryogels were characterized and tested for oleic acid conversion. The thermally stable amorphous spherical carbon cryogel has a large total surface area with high acidity. Experimental results revealed the optimum FAME yield and oleic acid conversion of 91.3wt.% and 98.1wt.%, respectively were attained at 65°C for 5h with 5wt.% catalyst loading and 20:1 methanol to oleic acid molar ratio. Therefore, carbon cryogel is highly potential for heterogeneous esterification of free fatty acid to biodiesel. Copyright © 2015 Elsevier Ltd. All rights reserved.

Total cross section of furfural by electron impact: Experiment and theory

Science.gov (United States)

Traoré Dubuis, A.; Verkhovtsev, A.; Ellis-Gibbings, L.; Krupa, K.; Blanco, F.; Jones, D. B.; Brunger, M. J.; García, G.

2017-08-01

We present experimental total cross sections for electron scattering from furfural in the energy range from 10 to 1000 eV, as measured using a double electrostatic analyzer gas cell electron transmission experiment. These results are compared to theoretical data for furfural, as well as to experimental and theoretical values for the structurally similar molecules furan and tetrahydrofuran. The measured total cross section is in agreement with the theoretical results obtained by means of the independent-atom model with screening corrected additivity rule including interference method. In the region of higher electron energies, from 500 eV to 10 keV, the total electron scattering cross section is also estimated using a semi-empirical model based on the number of electrons and dipole polarizabilities of the molecular targets. Together with the recently measured differential and integral cross sections, and the furfural energy-loss spectra, the present total cross section data nearly complete the data set that is required for numerical simulation of low-energy electron processes in furfural, covering the range of projectile energies from a few electron volts up to 10 keV.

Total cross section of furfural by electron impact: Experiment and theory.

Science.gov (United States)

Traoré Dubuis, A; Verkhovtsev, A; Ellis-Gibbings, L; Krupa, K; Blanco, F; Jones, D B; Brunger, M J; García, G

2017-08-07

We present experimental total cross sections for electron scattering from furfural in the energy range from 10 to 1000 eV, as measured using a double electrostatic analyzer gas cell electron transmission experiment. These results are compared to theoretical data for furfural, as well as to experimental and theoretical values for the structurally similar molecules furan and tetrahydrofuran. The measured total cross section is in agreement with the theoretical results obtained by means of the independent-atom model with screening corrected additivity rule including interference method. In the region of higher electron energies, from 500 eV to 10 keV, the total electron scattering cross section is also estimated using a semi-empirical model based on the number of electrons and dipole polarizabilities of the molecular targets. Together with the recently measured differential and integral cross sections, and the furfural energy-loss spectra, the present total cross section data nearly complete the data set that is required for numerical simulation of low-energy electron processes in furfural, covering the range of projectile energies from a few electron volts up to 10 keV.

A feasible process for furfural production from the pre-hydrolysis liquor of corncob via biochar catalysts in a new biphasic system.

Science.gov (United States)

Deng, Aojie; Lin, Qixuan; Yan, Yuhuan; Li, Huiling; Ren, Junli; Liu, Chuanfu; Sun, Runcang

2016-09-01

A feasible approach was developed to produce furfural from the pre-hydrolysis liquor of corncob via biochar catalysts as the solid acid catalyst in a new biphasic system with dichloromethane (DCM) as the organic phase and the concentrated pre-hydrolysis liquor (CPHL) containing NaCl as the aqueous phase. The biochar catalyst possessing many acidity groups (SO3H, COOH and phenolic OH groups) was prepared by the carbonization and sulfonation process of the corncob hydrolyzed residue. The influence of the catalytic condition on furfural yield and selectivity was comparatively studied. It was found that 81.14% furfural yield and 83.0% furfural selectivity were obtained from CPHL containing 5wt% xylose using this biochar catalyst in the CPHL-NaCl/DCM biphasic system at 170°C for 60min. In addition, with the regeneration process, this catalyst displayed the high performance and excellent recyclability. Copyright © 2016 Elsevier Ltd. All rights reserved.

Lignin development tests. Announcement I. Characteristics of celluloselignin derived in production of furfural

Energy Technology Data Exchange (ETDEWEB)

Rozmarin, Ch.; Popa, V.I.

1982-01-01

During production of furfural from waste agricultural plants, a large quantity of cellulose-lignin is left (CL). Provides analysis results on tests carried out to determine potential chemical application of this complex product. In particular, it was shown that in corncobs and in sunflower seed husks, the following components are present, respectively (%): difficult to hydrolize polysaccharides 42.8 and 20.3, easily hydrolized 38.2 and 27.9; lignin 20.3 and 26.55; acids: galacturonic 7 and 5.5, glycuronic 9 and 7; monosaccharides: galactose 7 and 5.5, glycose - traces and 7, arabinose 10.8 and 8.4, xylose 45 and 40, ramnose 9 and 9. CL derived during production of furfural, contains (%): ash 6.47, difficult to hydrolize polysaccharides 37.25, residual lignin after hydrolysis with 80% H/sub 2/SO/sub 4/ 57.5, PB in cold water extract 9.05, -OCH/sub 3/ 5.02, -OH 33.1, acids extracted with cold water, 5.32. Composition of lignin extracted with cold water from CL (%): C-60.58, H-5.03, 0-34.39, ash 0.58, -OCH/sub 3/, 5.51, OH 13.96. The given date make it possible to conclude that CL has a complex composition which must be taken in account when selecting its utilization.

Effect of pretreatment severity on accumulation of major degradation products from dilute acid pretreated corn stover and subsequent inhibition of enzymatic hydrolysis of cellulose.

Science.gov (United States)

Um, Byung-Hwan; van Walsum, G Peter

2012-09-01

The concept of reaction severity, which combines residence time and temperature, is often used in the pulp and paper and biorefining industries. The influence of corn stover pretreatment severity on yield of sugar and major degradation products and subsequent effects on enzymatic cellulose hydrolysis was investigated. The pretreatment residence time and temperature, combined into the severity factor (Log R(o)), were varied with constant acid concentration. With increasing severity, increasing concentrations of furfural and 5-hydroxymethylfurfural (5-HMF) coincided with decreasing yields of oligosaccharides. With further increase in severity factor, the concentrations of furans decreased, while the formation of formic acid and lactic acid increased. For example, from severity 3.87 to 4.32, xylose decreased from 6.39 to 5.26 mg/mL, while furfural increased from 1.04 to 1.33 mg/mL; as the severity was further increased to 4.42, furfural diminished to 1.23 mg/mL as formate rose from 0.62 to 1.83 mg/mL. The effects of dilute acid hydrolyzate, acetic acid, and lignin, in particular, on enzymatic hydrolysis were investigated with a rapid microassay method. The microplate method gave considerable time and cost savings compared to the traditional assay protocol, and it is applicable to a broad range of lignocellulosic substrates.

Biomass decomposition in near critical water

International Nuclear Information System (INIS)

Sinag, Ali; Guelbay, Selen; Uskan, Burcin; Canel, Muammer

2010-01-01

Conversion of baby food (taken as model biomass for protein and carbohydrate containing biomass) to the valuable chemicals in near critical water (648 K and 24 MPa) in an autoclave is presented in this work. K 2 CO 3 , Nickel on silica and Zeolith (HZSM-5) are selected as catalysts. A detailed characterization of the aqueous phases is performed by High Pressure Liquid Chromatography, UV-Vis Spectroscopy, Total Organic Carbon Analyser. Solid particles recovered by the experiments are also subjected to Scanning Electron Microscopy analysis. This study determines the effect of reaction conditions on the reactivity of the major biomass component. Acetic, formic and glycolic acid, aldehydes (acetaldehyde, formaldehyde), phenol and phenol derivatives, furfural, methyl furfural, hydroxymethyl furfural are the intermediates found in the aqueous phase. Baby food contains mostly carbohydrates, proteins, a variety of salts and minerals, etc. Thus, the results show the effect of these ingredients on the hydrothermal conversion of biomass. It is found that the formation and degradation pathways of the intermediates are influenced by the biomass structure.

Biomass decomposition in near critical water

Energy Technology Data Exchange (ETDEWEB)

Sinag, Ali, E-mail: sinag@science.ankara.edu.t [Department of Chemistry, Science Faculty, Ankara University, 06100 Besevler, Ankara (Turkey); Guelbay, Selen; Uskan, Burcin; Canel, Muammer [Department of Chemistry, Science Faculty, Ankara University, 06100 Besevler, Ankara (Turkey)

2010-03-15

Conversion of baby food (taken as model biomass for protein and carbohydrate containing biomass) to the valuable chemicals in near critical water (648 K and 24 MPa) in an autoclave is presented in this work. K{sub 2}CO{sub 3}, Nickel on silica and Zeolith (HZSM-5) are selected as catalysts. A detailed characterization of the aqueous phases is performed by High Pressure Liquid Chromatography, UV-Vis Spectroscopy, Total Organic Carbon Analyser. Solid particles recovered by the experiments are also subjected to Scanning Electron Microscopy analysis. This study determines the effect of reaction conditions on the reactivity of the major biomass component. Acetic, formic and glycolic acid, aldehydes (acetaldehyde, formaldehyde), phenol and phenol derivatives, furfural, methyl furfural, hydroxymethyl furfural are the intermediates found in the aqueous phase. Baby food contains mostly carbohydrates, proteins, a variety of salts and minerals, etc. Thus, the results show the effect of these ingredients on the hydrothermal conversion of biomass. It is found that the formation and degradation pathways of the intermediates are influenced by the biomass structure.

Sn-MCM-41 as Efficient Catalyst for the Conversion of Glucose into 5-Hydroxymethylfurfural in Ionic Liquids

Directory of Open Access Journals (Sweden)

Qing Xu

2013-11-01

Full Text Available Recently, much attention has been paid to the development of technologies that facilitate the conversion of biomass into platform chemicals such as 5-hydroxymethylfurfural (5-HMF. In this paper, a tin-containing silica molecular sieve (Sn-MCM-41 was found to act as a bifunctional heterogeneous catalyst for the efficient conversion of glucose into 5-HMF in ionic liquid. In the presence of [EMIM]Br, the yield of 5-HMF converted from glucose reached 70% at 110 °C after 4 h. During the reaction, the active center of the catalyst first catalyzed the isomerization of glucose into fructose and then the dehydration of fructose into 5-HMF. After the reaction, the heterogeneous catalyst Sn-MCM-41 could be easily recovered and reused without a significant loss in activity. The catalyst Sn-MCM-41 was also able to catalyze the conversion of fructose into 5-HMF at an 80% yield. Moreover, the low toxicity of the Sn-based catalyst makes the method a greener approach for the conversion of saccharides into 5-HMF.

Multivariate optimization of headspace trap for furan and furfural simultaneous determination in sponge cake.

Science.gov (United States)

Cepeda-Vázquez, Mayela; Blumenthal, David; Camel, Valérie; Rega, Barbara

2017-03-01

Furan, a possibly carcinogenic compound to humans, and furfural, a naturally occurring volatile contributing to aroma, can be both found in thermally treated foods. These process-induced compounds, formed by close reaction pathways, play an important role as markers of food safety and quality. A method capable of simultaneously quantifying both molecules is thus highly relevant for developing mitigation strategies and preserving the sensory properties of food at the same time. We have developed a unique reliable and sensitive headspace trap (HS trap) extraction method coupled to GC-MS for the simultaneous quantification of furan and furfural in a solid processed food (sponge cake). HS Trap extraction has been optimized using an optimal design of experiments (O-DOE) approach, considering four instrumental and two sample preparation variables, as well as a blocking factor identified during preliminary assays. Multicriteria and multiple response optimization was performed based on a desirability function, yielding the following conditions: thermostatting temperature, 65°C; thermostatting time, 15min; number of pressurization cycles, 4; dry purge time, 0.9min; water / sample amount ratio (dry basis), 16; and total amount (water + sample amount, dry basis), 10g. The performances of the optimized method were also assessed: repeatability (RSD: ≤3.3% for furan and ≤2.6% for furfural), intermediate precision (RSD: 4.0% for furan and 4.3% for furfural), linearity (R 2 : 0.9957 for furan and 0.9996 for furfural), LOD (0.50ng furan g sample dry basis -1 and 10.2ng furfural g sample dry basis -1 ), LOQ (0.99ng furan g sample dry basis -1 and 41.1ng furfural g sample dry basis -1 ). Matrix effect was observed mainly for furan. Finally, the optimized method was applied to other sponge cakes with different matrix characteristics and levels of analytes. Copyright © 2016. Published by Elsevier B.V.

Genetic polymorphism of Malassezia furfur isolates from Han and Tibetan ethnic groups in China using DNA fingerprinting.

Science.gov (United States)

Zhang, Hao; Zhang, Ruifeng; Ran, Yuping; Dai, Yaling; Lu, Yao; Wang, Peng

2010-12-01

Reported isolation rates of Malassezia yeast from human skin show geographic variations. In China, the populations of the Han (1,182.95 million) and Tibetan (5.41 million) ethnic groups are distributed over 9.6 and 3.27 million square kilometers respectively, making biodiversity research feasible and convenient. Malassezia furfur clinical strains (n = 29) isolated from different individuals, with or without associated dermatoses, of these two ethnic groups (15 Han and 12 Tibetan) were identified and analyzed with DNA fingerprinting using single primers specific to minisatellites. Using the Bionumerics software, we found that almost all M. furfur clinical isolates and type strains formed five distinct group clusters according to their associated skin diseases and the ethnic groups of the patients. These findings are the first to focus on the genetic diversity and relatedness of M. furfur in the Tibetan and Han ethnic groups in China and reveal genetic variation associated with related diseases, host ethnicity and geographic origin.

Data of furfural adsorption on nano zero valent iron (NZVI synthesized from Nettle extract

Directory of Open Access Journals (Sweden)

Mehdi Fazlzadeh

2018-02-01

Full Text Available Among various water and wastewater treatment methods, adsorption techniques are widely used to remove certain classes of pollutants due to its unique features. Thus, the aim of this data article is to synthesize zero valent iron nanoparticles (NZVI from Nettle leaf extract by green synthesis method as an environmentally friendly technique, and to evaluate it's efficiency in the removal of furfural from aqueous solutions. The data of possible adsorption mechanism and isotherm of furfural on the synthesized adsorbent are depicted in this data article. The data acquired showed that the adsorption trend follows the pseudo-second order kinetic model and that the Langmuir isotherm was suitable for correlation of equilibrium data with the maximum adsorption capacity of 454.4 mg/g. The information of initial furfural concentration, pH, adsorbent dosage and contact time effects on the removal efficiency are presented. Considering the findings data, the developed nanoparticle from Nettle leaf extract, as a low cost adsorbent, could be considered as promising adsorbent for furfural and probably similar organic pollutants removal from aqueous solutions. Keywords: Green synthesis method, Furfural, Nettle zero valent iron nanoparticles (NNZVI, Low cost adsorbents