WorldWideScience

Sample records for reduced energy consumption

  1. Using LEDs to reduce energy consumption

    Science.gov (United States)

    Eweni, Chukwuebuka E.

    The most popularly used light bulb in homes is the incandescent. It is also the least energy efficient. The filament in the bulb is so thin that it causes resistance in the electricity, which in turn causes the electricity's energy to form heat. This causes the incandescent to waste a lot of energy forming heat rather than forming the light. It uses 15 lumens per watt of input power. A recorded MATLAB demonstration showcased LED versatility and how it can be used by an Arduino UNO board. The objective of this thesis is to showcase how LEDs can reduce energy consumption through the use of an Arduino UNO board and MATLAB and to discuss the applications of LED. LED will be the future of lighting homes and will eventually completely incandescent bulbs when companies begin to make the necessary improvements to the LED.

  2. Reduced energy consumption for melting in foundries

    Energy Technology Data Exchange (ETDEWEB)

    Skov-Hansen, S.

    2007-09-15

    By improving the gating technology in traditional gating systems it is possible to reduce the amount of metal to be re-melted, and hence reduce the energy consumption for melting in foundries. Traditional gating systems are known for a straight tapered down runner a well base and 90 deg. bends in the runner system. In the streamlined gating systems there are no sharp changes in direction and a large effort is done to confine and control the flow of the molten metal during mould filling. Experiments in real production lines have proven that using streamlined gating systems improves yield by decreasing the poured weight compared to traditional layouts. In a layout for casting of valve housings in a vertically parted mould the weight of the gating system was reduced by 1,1kg which is a 20% weight reduction for the gating system. In a layout for horizontally parted moulds the weight of the gating system has been reduced by 3,7kg which is a weight reduction of 60% for the gating system. The experiments casting valve housings in ductile iron also proved that it is possible to lower the pouring temperature from 1400 deg. C to 1300 deg. C without the risk of cold runs. Glass plate fronted moulds have been used to study the flow of melt during mould filling. These experiments have also been used for studying the flow pattern when ceramic filters are used. The thorough study of the use of filters revealed that the metal passing through the filter is divided into a number of small jets. This proves that filters do not have the claimed positive effect on the flow of metal. The volumes necessary on either side of the filter is not filled till a backpressure is build up and results in formation of pressure shocks when backfilled. These pressure shocks result in more turbulence inside the casting than the same gating system with no filter. Not using filters can mean a reduction in poured weight of 0,6kg. To examine if the experiments using glass plate fronted moulds give

  3. Improved immunization strategy to reduce energy consumption on nodes traffic

    Science.gov (United States)

    Yuan, Jiazheng; Zhao, Dongyan; Long, Keping; Zheng, Yongrong

    2017-04-01

    The increasing requirement of transmission network sizes would result in huge energy consumption with communication traffic. Green communication technologies are expected to help in reducing energy consumption impact to environment. Therefore, it is important to design energy-efficient strategy that can decrease energy consumption. This paper proposes to use the acquaintance and improved targeted immunization strategies from complex systems to resolve energy consumption issues and uses traffic as measure standard to obtain a stable threshold. The simulation results show that the improved control strategy is better and more effective to save as much energy as possible.

  4. Monitor energy consumption - Reduce costs; Energieverbrauch ueberwachen - Kosten senken

    Energy Technology Data Exchange (ETDEWEB)

    Bolliger, R.

    2008-07-01

    This article takes a look at energy consumption in residential, industrial and commercial buildings and how energy consumption metering can help reduce energy consumption. The proprietary system briefly described uses the KNX bus system to transfer data. Visualisation of the data collected is briefly described. Peak-load management and ways of adapting user behaviour are discussed. Trends towards higher levels of consumption - particularly in emerging markets - are discussed. Energy needs, carbon dioxide emissions, investments and potentials for making savings are discussed. Possibilities of increasing energy efficiency in the residential, industrial and commercial sectors are examined.

  5. Upgrading existing evaporators to reduce energy consumption

    Energy Technology Data Exchange (ETDEWEB)

    1977-01-01

    This manual is intended to assist the evaporator engineer who will be performing the technical and economic analyses to determine the most suitable evaporator upgrading technique for his particular plant. Information is included on potentials for upgrading evaporators; correctable operating factors; heat recovery and other improvements in energy use with minor capital investments; upgrading through major capital investments; guidelines for formulating an upgrading program; and new technologies encompassing advanced designs, use of solar and low-grade heat sources, and heat transfer enhancement. A 36 item bibliography is included. (LCL)

  6. Psychological strategies to reduce energy consumption: project summary report

    Energy Technology Data Exchange (ETDEWEB)

    Becker, L J; Seligman, C; Darley, J M

    1979-06-30

    This report reviews the research conducted in connection with a project to apply psychological theory and procedures to the problems of encouraging residential energy conservation. A major part of the project involved surveys of residents' energy-related attitudes. The best (and only consistent) attitudinal predictor of residents' actual energy consumption was their attitude about thermal comfort. A number of other attitudes that could conceivably have been related to consumption, such as attitudes about the reality of the crisis, were not found to be related to consumption. Another major focus of the project was on the effectiveness of feedback (that is, giving residents information about their energy use) as an aid to residents' conservation efforts. A series of experiments demonstrated that frequent, credible energy-consumption feedback, coupled with encouragement to adopt a reasonable but difficult energy-conservation goal, could facilitate conservation. However, these studies also demonstrated that residents could not be given just any kind of information about their energy use as feedback and that even proper feedback would not lead to conservation in all households. Conditions that are crucial for the success of feedback as a conservation aid are discussed. Other studies conducted by the project looked at the effect on energy consumption of (1) a device to reduce air-conditioning waste by signalling when it is cool outside, (2) an automatic multi-setback thermostat, and (3) utility companies' average payment plans. A survey of residents' knowledge of their energy use also was conducted. 23 references.

  7. Methods for Reducing the Energy Consumption of Mobile Broadband Networks

    DEFF Research Database (Denmark)

    Micallef, Gilbert

    2010-01-01

    , increasing also their overall energy consumption. However, traffic analysis shows that during a 24 hour period, the volume of carried traffic varies continuously, with the network operating anywhere close to its full capacity for very short periods of time. The problem is that during hours of low network......Up until recently, very little consideration has been given towards reducing the energy consumption of the networks supporting mobile communication. This has now become an important issue since with the predicted boost in traffic, network operators are required to upgrade and extend their networks...... traffic the energy consumption remains high. This article proposes two major solutions for mitigating this problem. In the first case, an energy saving between 14% and 36% is observed by allowing the network to dynamically optimize its available capacity based on the traffic being carried. In the second...

  8. REDUCING ENERGY CONSUMPTION IN AGRICULTURAL PRODUCTION (POTATO EXAMPLE

    Directory of Open Access Journals (Sweden)

    Byshоv N. V.

    2016-06-01

    Full Text Available In recent years, in many countries around the world, much attention is paid to the issues of ensuring of rational use of energy resources, due to a number of objective factors, chief among which are: the lack of own energy resources to meet domestic energy needs; the sharp increase in the cost of production and the production of energy resources; further growth in energy needs; the presence of large potential opportunities to reduce unproductive losses of fuel and energy. In the world, the challenge now is to ensure a gradual but steady transfer of the economy on energy saving way of development. To achieve the goal of reducing energy costs we might use two ways: firstly, the widespread introduction of energy saving technologies, and secondly, the reduction of material production, improving its quality and service. In agriculture, the improvement of the technological process can be carried out using new tillage methods, improving the organization of production and tools. Further development of mechanization in agriculture will contribute to further growth of electrification in the agricultural sector, which will significantly reduce the use of the most expensive and limited energy resources. The article offers a technique of the estimation of the efficiency of consumption of energy in agricultural production. In order to compare the efficiency of machines in the cultivation and harvesting of potatoes, there was conducted an energy assessment of the operations of modern technology. As variables, there were investigated different operation modes of the machine: working speed and working width, depth of stroke of the working bodies. In the process of evaluating energy operations, modern technology to prepare the soil for planting potatoes was determined humidity, mechanical composition and soil type. As a main factor in the analysis of technological methods, we have taken the overall specific energy consumption and specific energy consumption for

  9. Controlled cooling of an electronic system for reduced energy consumption

    Science.gov (United States)

    David, Milnes P.; Iyengar, Madhusudan K.; Schmidt, Roger R.

    2016-08-09

    Energy efficient control of a cooling system cooling an electronic system is provided. The control includes automatically determining at least one adjusted control setting for at least one adjustable cooling component of a cooling system cooling the electronic system. The automatically determining is based, at least in part, on power being consumed by the cooling system and temperature of a heat sink to which heat extracted by the cooling system is rejected. The automatically determining operates to reduce power consumption of the cooling system and/or the electronic system while ensuring that at least one targeted temperature associated with the cooling system or the electronic system is within a desired range. The automatically determining may be based, at least in part, on one or more experimentally obtained models relating the targeted temperature and power consumption of the one or more adjustable cooling components of the cooling system.

  10. Applying Smart Grid Technology For Reducing Electric Energy Consumption

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, Roy

    2010-09-15

    In recent years the term 'Smart Grid' has become a widely used buzz word with respect to the operation of Electric Power Systems. One analysis has suggested that a Smart Grid could potentially reduce annual energy consumption in the USA by 56 to 203 billion kWh in 2030, corresponding to a 1.2 to 4.3% reduction in projected retail electricity sales in 2030. This paper discusses some of the smart grid technologies pertaining to the operation of electric power distribution networks.

  11. Reduced energy consumption by using streamlined gating systems

    Institute of Scientific and Technical Information of China (English)

    Seren Skov-Hansen; Niels Skat Tiedje

    2008-01-01

    In foundries a lot of effort is done to minimize energy consumption in the production to reduce costs and hence increase the competitiveness. At the same time the foundries must live up to the increased demands for high quality castings.Traditional gating systems are known for a straight tapered down runner, a well base and 90° bends in the runner system. Previous work has shown that the traditional way of designing gating systems creates high inconsistency in flow patterns during filling. In the streamlined gating systems there are no sharp changes in direction and a large effort is done to confine and control the flow of the molten metal during mould filling. The main objective in the work presented here is to use the principles of the streamlined gating systems to reduce the weight of the gating system relative to the traditional layouts. By reducing the weight of gating system and thereby improving yield, the amount of molten iron needed is also reduced, hence reducing the energy consumption for melting.Experiments in real production lines have proven that it is possible to achieve a reduction in the poured weight by using the streamlined gating systems. In a layout for casting of three valve housings in a vertically parted mould the weight of the gating system was reduced by 1.1 kg changing from the traditional layouts to the streamlined gating systems. This weight reduction corresponds in this case to a 20% weight reduction for the gating system. Using streamlined gating systems with fan gates to give a beneficial heat distribution in the castings may be an efficient tool to eliminate the need for heat treatment. In the experiments the change in gating system from the traditional layout to the streamlined layout removed the need for heat treatment. This obviously means a huge energy saving in the foundry. The energy consumption for heat treatment of iron has been found to be 0.489 kWh/kg. The valve housing in the experiments weighs 3 kg so when the need for

  12. Possible technical solutions to reduce energy consumption in audio products

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, K.; Andersen, M.A.E.

    1999-07-01

    In common audio products nearly all the supplied power is dissipated as heat. The major consumers are with almost no exception the power supply and the audio amplifier. This paper is divided in two parts, concentrating on typical efficiency measures for the concepts of today and the possibly technical solutions, by which the overall efficiency can be considerably improved in the future. Traditional power supplies are made using a transformer operating on the mains frequency followed by a linear regulator. These are bulky and the efficiency is only around 40%. Using high frequency switch mode power supplies the size of the power supply can be reduced and the efficiency can be increased to 80-90%. Construction of optimal amplifiers in regard to total energy consumption over life time, can only be accomplished by considering both the general volume control distribution, and the general spectral amplitude distribution of audio signals. The traditional efficiency measure specified at the maximum efficiency level says only very little about the real energy consumption of the audio amplifier. As an example, the theoretical efficiency for at traditional class B amplifier is 78%. Using a new efficiency measure defined on the basis of the approximate volume control distribution, an 50W amplifier example shows an overall efficiency of only 1%. In the paper possible solutions and guidelines to increase the real amplifier efficiency are given. (au)

  13. New Building Principles In Consequence Of Legislative Demands For Reduced Energy Consumption In Danish Housing

    DEFF Research Database (Denmark)

    Jessen, Rasmus Zederkof; Brohus, Henrik; Kirkegaard, Poul Henning

    2006-01-01

    The increasing restrictions in coming building codes regarding energy consumption in housing generate a need to rethink the building design as well as the building process. This paper discusses the need to change/challenge the way structures are conceived in order to accommodate new legislative...... demands regarding energy consumption. More often than not sustainable aspects like the need for reduced energy consumption are implemented late in the design process. This paper investigates the affect of incorporating aspects like solar heat gain and energy consumption in the initial concept...

  14. Reducing Operating Costs and Energy Consumption at Water Utilities

    Science.gov (United States)

    Due to their unique combination of high energy usage and potential for significant savings, utilities are turning to energy-efficient technologies to help save money. Learn about cost and energy saving technologies from this brochure.

  15. Measuring the Efficacy of an Energy and Environmental Awareness Campaign to Effectively Reduce Water Consumption

    Science.gov (United States)

    Miller, Laura Little

    2010-01-01

    Increased energy costs and a move toward environmental stewardship are driving many organizations, including universities, to engage in awareness efforts to reduce both energy consumption and their carbon footprint. The purpose of this paper is to determine whether organizational programs aimed at energy and environmental awareness have a…

  16. A Novel Approach for Reduce Energy Consumption in Mobile Cloud Computing

    Directory of Open Access Journals (Sweden)

    Najmeh Moghadasi

    2015-09-01

    Full Text Available In recent years, using mobile devices has a special place in human life and applicability of these devices leads to increased number of users. Business companies have integrated them with cloud computing technology and have provided mobile cloud in order to improve using mobile devices and overcome the energy consumption of mobile devices. In mobile cloud computing, computations and storages of mobile devices applications are transferred to cloud data centers and mobile devices are used merely as user interface to access services. Therefore, cloud computing will help to reduce energy consumption of mobile devices. In this paper, a new approach is given to reduce energy consumption of based on Learning Automata in mobile cloud computing. Simulation results show that our proposed approach dramatically saves energy consumption through determining the appropriate location for application.

  17. Reducing Display Bottle Cooler Energy Consumption Using PCM As Active Thermal Storage

    OpenAIRE

    Beek, Marcel van; de Jong, Hans

    2014-01-01

    The final results of an analytical and experimental study in reducing the energy consumption of a display bottle cooler using Phase Change Material (PCM) as an active thermal storage are presented. The objective of the study was to design and built a 350 dm3 glass door bottle cooler having an appliance energy consumption reduction of over 75% compared to state of the art bottle coolers (2010 figures). Calculation results show that active thermal storage using PCM can be effectively applied to...

  18. Control Motion Approach of a Lower Limb Orthosis to Reduce Energy Consumption

    Directory of Open Access Journals (Sweden)

    Daniel Sanz-Merodio

    2012-12-01

    Full Text Available By analysing the dynamic principles of the human gait, an economic gait‐control analysis is performed, and passive elements are included to increase the energy efficiency in the motion control of active orthoses. Traditional orthoses use position patterns from the clinical gait analyses (CGAs of healthy people, which are then de‐normalized and adjusted to each user. These orthoses maintain a very rigid gait, and their energy cost is very high, reducing the autonomy of the user. First, to take advantage of the inherent dynamics of the legs, a state machine pattern with different gains in each state is applied to reduce the actuator energy consumption. Next, different passive elements, such as springs and brakes in the joints, are analysed to further reduce energy consumption. After an off‐line parameter optimization and a heuristic improvement with genetic algorithms, a reduction in energy consumption of 16.8% is obtained by applying a state machine control pattern, and a reduction of 18.9% is obtained by using passive elements. Finally, by combining both strategies, a more natural gait is obtained, and energy consumption is reduced by 24.6% compared with a pure CGA pattern.

  19. A New System to Estimate and Reduce Electrical Energy Consumption of Domestic Hot Water in Spain

    Directory of Open Access Journals (Sweden)

    Alberto Gutierrez-Escolar

    2014-10-01

    Full Text Available Energy consumption rose about 28% over the 2001 to 2011 period in the Spanish residential sector. In this environment, domestic hot water (DHW represents the second highest energy demand. There are several methodologies to estimate DHW consumption, but each methodology uses different inputs and some of them are based on obsolete data. DHW energy consumption estimation is a key tool to plan modifications that could enhance this consumption and we decided to update the methodologies. We studied DHW consumption with data from 10 apartments in the same building during 18 months. As a result of the study, we updated one chosen methodology, adapting it to the current situation. One of the challenges to improve efficiency of DHW use is that most of people are not aware of how it is consumed in their homes. To help this information to reach consumers, we developed a website to allow users to estimate the final electrical energy needed for DHW. The site uses three estimation methodologies and chooses the best fit based on information given by the users. Finally, the application provides users with recommendations and tips to reduce their DHW consumption while still maintaining the desired comfort level.

  20. Reducing Energy Consumption in Manet Using A Layer Three Routing Protocol

    Directory of Open Access Journals (Sweden)

    Alexandru Robert SIMION

    2015-12-01

    Full Text Available Mobile ad-hoc network (MANET is an autonomous system based on wireless links in which information is exchanged without having any centralized administration. In this paper, one of its main challenge, the limited battery power is treated. Based on the network layer information an energy reduction algorithm was proposed and the influence of reduced energy consumption over other metrics was studied. The paper pays a special attention to the effects of the hidden terminal problem in mobile wireless network.

  1. The potential for energy savings when reducing the water consumption in a kraft pulp mill

    Energy Technology Data Exchange (ETDEWEB)

    Wising, Ulrika; Berntsson, Thore [Chalmers Univ. of Technology, Goeteborg (Sweden). Dept. of Chemical Engineering and Environmental Science; Stuart, Paul [Ecole Polytechnique, Montreal (Canada). Dept. of Chemical Engineering

    2004-05-01

    In this paper an existing pulp and paper mill has been studied in a systematic way regarding the reduction of water consumption, and the resulting increased potential for energy integration. It has been found that when the mill's hot water consumption is decreased, the live steam demand for the mill also decreases. Also when decreasing the hot water consumption, the quantity and temperature of available excess heat increases. This excess heat can be used for evaporation, thereby reducing the live steam demand further by up to 1.5 GJ/t. A pinch analysis was performed at an existing mill and it was found that if pinch violations are removed, the hot water consumption is not an important factor any more. Removing all the pinch violations and using the remaining excess heat for evaporation yields a significantly larger energy savings for the mill (4.0 GJ/t). From an economic optimum perspective it is probably most profitable to do a combination of reducing water consumption, removing pinch violations, and use the remaining excess heat for evaporation.

  2. Reducing aeration energy consumption in a large-scale membrane bioreactor: Process simulation and engineering application.

    Science.gov (United States)

    Sun, Jianyu; Liang, Peng; Yan, Xiaoxu; Zuo, Kuichang; Xiao, Kang; Xia, Junlin; Qiu, Yong; Wu, Qing; Wu, Shijia; Huang, Xia; Qi, Meng; Wen, Xianghua

    2016-04-15

    Reducing the energy consumption of membrane bioreactors (MBRs) is highly important for their wider application in wastewater treatment engineering. Of particular significance is reducing aeration in aerobic tanks to reduce the overall energy consumption. This study proposed an in situ ammonia-N-based feedback control strategy for aeration in aerobic tanks; this was tested via model simulation and through a large-scale (50,000 m(3)/d) engineering application. A full-scale MBR model was developed based on the activated sludge model (ASM) and was calibrated to the actual MBR. The aeration control strategy took the form of a two-step cascaded proportion-integration (PI) feedback algorithm. Algorithmic parameters were optimized via model simulation. The strategy achieved real-time adjustment of aeration amounts based on feedback from effluent quality (i.e., ammonia-N). The effectiveness of the strategy was evaluated through both the model platform and the full-scale engineering application. In the former, the aeration flow rate was reduced by 15-20%. In the engineering application, the aeration flow rate was reduced by 20%, and overall specific energy consumption correspondingly reduced by 4% to 0.45 kWh/m(3)-effluent, using the present practice of regulating the angle of guide vanes of fixed-frequency blowers. Potential energy savings are expected to be higher for MBRs with variable-frequency blowers. This study indicated that the ammonia-N-based aeration control strategy holds promise for application in full-scale MBRs.

  3. Identifying opportunities to reduce the consumption of energy across mineral process and recovery plants

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, G. [Schneider Electric, Andover, MA (United States)

    2010-07-01

    In response to current market conditions and ongoing government policies, mining organizations are shifting focus towards sustainability and better utilization of energy. This presentation reviewed the role that an operations team plays in energy utilization and efficiency across the value chain. Mining companies want energy efficient solutions that identify and quantify potential energy savings in real dollar terms. A case study was presented to demonstrate that many continuous improvement processes can be adapted to identify the root causes of energy over consumption and to quantify the loss, or potential for saving, in real-time. The purpose of such an analysis is to improve decision making and to identify the most efficient operations equipment as well as the most effective process management and operational management. The analysis can help determine the lowest cost opportunities and validate data needed to justify capital intensive proposals for changes to equipment or processes, based on measurable energy savings. This will help organizations reduce energy consumption with the lowest investment. tabs., figs.

  4. Whey protein consumption after resistance exercise reduces energy intake at a post-exercise meal.

    Science.gov (United States)

    Monteyne, Alistair; Martin, Alex; Jackson, Liam; Corrigan, Nick; Stringer, Ellen; Newey, Jack; Rumbold, Penny L S; Stevenson, Emma J; James, Lewis J

    2016-11-10

    Protein consumption after resistance exercise potentiates muscle protein synthesis, but its effects on subsequent appetite in this context are unknown. This study examined appetite and energy intake following consumption of protein- and carbohydrate-containing drinks after resistance exercise. After familiarisation, 15 resistance training males (age 21 ± 1 years, body mass 78.0 ± 11.9 kg, stature 1.78 ± 0.07 m) completed two randomised, double-blind trials, consisting of lower-body resistance exercise, followed by consumption of a whey protein (PRO 23.9 ± 3.6 g protein) or dextrose (CHO 26.5 ± 3.8 g carbohydrate) drink in the 5 min post-exercise. An ad libitum meal was served 60 min later, with subjective appetite measured throughout. Drinks were flavoured and matched for energy content and volume. The PRO drink provided 0.3 g/kg body mass protein. Ad libitum energy intake (PRO 3742 ± 994 kJ; CHO 4172 ± 1132 kJ; P = 0.007) and mean eating rate (PRO 339 ± 102 kJ/min; CHO 405 ± 154 kJ/min; P = 0.009) were lower during PRO. The change in eating rate was associated with the change in energy intake (R = 0.661, P = 0.007). No interaction effects were observed for subjective measures of appetite. The PRO drink was perceived as creamier and thicker, and less pleasant, sweet and refreshing (P consumption after resistance exercise reduces subsequent energy intake, and this might be partially mediated by a reduced eating rate. Whilst this reduced energy intake is unlikely to impair hypertrophy, it may be of value in supporting an energy deficit for weight loss.

  5. Control Strategies to Reduce the Energy Consumption of Central Domestic Hot Water Systems

    Energy Technology Data Exchange (ETDEWEB)

    Dentz, Jordan; Ansanelli, Eric; Henderson, Hugh; Varshney, Kapil

    2016-06-03

    Domestic hot water (DHW) heating is the second largest energy end use in U.S. buildings, exceeded only by space conditioning. Recirculation systems consisting of a pump and piping loop(s) are commonly used in multifamily buildings to reduce wait time for hot water at faucets; however, constant pumping increases energy consumption by exposing supply and return line piping to continuous heat loss, even during periods when there is no demand for hot water. In this study, ARIES installed and tested two types of recirculation controls in a pair of buildings in order to evaluate their energy savings potential. Demand control, temperature modulation controls, and the simultaneous operation of both were compared to the baseline case of constant recirculation. Additionally, interactive effects between DHW control fuel reductions and space conditioning (heating and cooling) were estimated in order to make more realistic predictions of the payback and financial viability of retrofitting DHW systems with these controls. Results showed that DHW fuel consumption reduced by 7% after implementing the demand control technique, 2% after implementing temperature modulation, and 15% after implementing demand control and temperature modulation techniques simultaneously; recirculation pump runtime was reduced to 14 minutes or less per day. With space heating and cooling interactions included, the estimated annual cost savings were 8%, 1%, and 14% for the respective control techniques. Possible complications in the installation, commissioning and operation of the controls were identified and solutions offered.

  6. Control Strategies to Reduce the Energy Consumption of Central Domestic Hot Water Systems

    Energy Technology Data Exchange (ETDEWEB)

    Dentz, Jordan [The Levy Partnership, Inc., New York, NY (United States). Advanced Residential Integrated Energy Solutions; Ansanelli, Eric [The Levy Partnership, Inc., New York, NY (United States). Advanced Residential Integrated Energy Solutions; Henderson, Hugh [The Levy Partnership, Inc., New York, NY (United States). Advanced Residential Integrated Energy Solutions; Varshney, Kapil [The Levy Partnership, Inc., New York, NY (United States). Advanced Residential Integrated Energy Solutions

    2016-06-23

    Domestic hot water (DHW) heating is the second largest energy end use in U.S. buildings, exceeded only by space conditioning. Recirculation systems consisting of a pump and piping loop(s) are commonly used in multifamily buildings to reduce wait time for hot water at faucets; however, constant pumping increases energy consumption by exposing supply and return line piping to continuous heat loss, even during periods when there is no demand for hot water. In this study, ARIES installed and tested two types of recirculation controls in a pair of buildings in order to evaluate their energy savings potential. Demand control, temperature modulation controls, and the simultaneous operation of both were compared to the baseline case of constant recirculation. Additionally, interactive effects between DHW control fuel reductions and space conditioning (heating and cooling) were estimated in order to make more realistic predictions of the payback and financial viability of retrofitting DHW systems with these controls. Results showed that DHW fuel consumption reduced by 7% after implementing the demand control technique, 2% after implementing temperature modulation, and 15% after implementing demand control and temperature modulation techniques simultaneously; recirculation pump runtime was reduced to 14 minutes or less per day. With space heating and cooling interactions included, the estimated annual cost savings were 8%, 1%, and 14% for the respective control techniques. Possible complications in the installation, commissioning and operation of the controls were identified and solutions offered.

  7. NASA Fixed Wing Project Propulsion Research and Technology Development Activities to Reduce Thrust Specific Energy Consumption

    Science.gov (United States)

    Hathaway, Michael D.; DelRasario, Ruben; Madavan, Nateri K.

    2013-01-01

    This paper presents an overview of the propulsion research and technology portfolio of NASA Fundamental Aeronautics Program Fixed Wing Project. The research is aimed at significantly reducing the thrust specific fuel/energy consumption of notional advanced fixed wing aircraft (by 60 % relative to a baseline Boeing 737-800 aircraft with CFM56-7B engines) in the 2030-2035 time frame. The research investments described herein are aimed at improving propulsive efficiency through higher bypass ratio fans, improving thermal efficiency through compact high overall pressure ratio gas generators, and exploring the potential benefits of boundary layer ingestion propulsion and hybrid gas-electric propulsion concepts.

  8. NASA Fixed Wing Project Propulsion Research and Technology Development Activities to Reduce Thrust Specific Energy Consumption

    Science.gov (United States)

    Hathaway, Michael D.; Rosario, Ruben Del; Madavan, Nateri K.

    2013-01-01

    This paper presents an overview of the propulsion research and technology portfolio of NASA Fundamental Aeronautics Program Fixed Wing Project. The research is aimed at significantly reducing the thrust specific fuel/energy consumption of notional advanced fixed wing aircraft (by 60 percent relative to a baseline Boeing 737-800 aircraft with CFM56-7B engines) in the 2030 to 2035 time frame. The research investments described herein are aimed at improving propulsive efficiency through higher bypass ratio fans, improving thermal efficiency through compact high overall pressure ratio gas generators, and exploring the potential benefits of boundary layer ingestion propulsion and hybrid gas-electric propulsion concepts.

  9. Reducing Spectrum Handoffs and Energy Switching Consumption of MADM-Based Decisions in Cognitive Radio Networks

    Directory of Open Access Journals (Sweden)

    Rafael Aguilar-Gonzalez

    2016-01-01

    Full Text Available In a cognitive radio network (CRN, the number of spectrum handoffs increases energy consumption of cognitive (or secondary users due to the channel switching process. This might limit the operation of the CRN, especially in scenarios where secondary users terminals are battery-powered. Thus, reducing the number of times a cognitive user involved in a transmission switch to different spectrum holes is required to increase battery life-time. In this regard, available spectrum holes possess different attributes (e.g., bandwidth that can be exploited to satisfy specific secondary users requirements (i.e., connection profile for data transmission while saving energy. Here, three multiple attribute decision-making (MADM algorithms for the spectrum decision functionality are evaluated using real spectrum measurements of TV bands. This is performed by proposing six decision parameters, which are extracted from the spectrum data to characterize its suitability. Then, these are used as inputs of the MADM algorithms to select the most suitable spectrum hole for a cognitive user. Thus, an enhanced MADM-based decision process is proposed to reduce the number of handoffs considering energy consumption due to channel switching (ECCS. Results quantify savings from 30% to 90% in ECCS and spectrum handoffs reductions from 47% to 90%.

  10. China's Top-1000 Energy-Consuming Enterprises Program:Reducing Energy Consumption of the 1000 Largest Industrial Enterprises in China

    Energy Technology Data Exchange (ETDEWEB)

    Price, Lynn; Price, Lynn; Wang, Xuejun; Yun, Jiang

    2008-06-02

    In 2005, the Chinese government announced an ambitious goal of reducing energy consumption per unit of GDP by 20% between 2005 and 2010. One of the key initiatives for realizing this goal is the Top-1000 Energy-Consuming Enterprises program. The energy consumption of these 1000 enterprises accounted for 33% of national and 47% of industrial energy usage in 2004. Under the Top-1000 program, 2010 energy consumption targets were determined for each enterprise. The objective of this paper is to evaluate the program design and initial results, given limited information and data, in order to understand the possible implications of its success in terms of energy and carbon dioxide emissions reductions and to recommend future program modifications based on international experience with similar target-setting agreement programs. Even though the Top-1000 Program was designed and implemented rapidly, it appears that--depending upon the GDP growth rate--it could contribute to somewhere between approximately 10% and 25% of the savings required to support China's efforts to meet a 20% reduction in energy use per unit of GDP by 2010.

  11. Milk Consumption Following Exercise Reduces Subsequent Energy Intake in Female Recreational Exercisers

    Directory of Open Access Journals (Sweden)

    Penny Rumbold

    2015-01-01

    Full Text Available The aim of this study was to evaluate the effects of skimmed milk as a recovery drink following moderate–vigorous cycling exercise on subsequent appetite and energy intake in healthy, female recreational exercisers. Utilising a randomised cross-over design, nine female recreational exercisers (19.7 ± 1.3 years completed a V̇O2peak test followed by two main exercise trials. The main trials were conducted following a standardised breakfast. Following 30 min of moderate-vigorous exercise (65% V̇O2peak, either 600 mL of skimmed milk or 600 mL of orange drink (475 mL orange juice from concentrate, 125 mL water, which were isoenergetic (0.88 MJ, were ingested, followed 60 min later with an ad libitum pasta meal. Absolute energy intake was reduced 25.2% ± 16.6% after consuming milk compared to the orange drink (2.39 ± 0.70 vs. 3.20 ± 0.84 MJ, respectively; p = 0.001. Relative energy intake (in relation to the energy content of the recovery drinks and energy expenditure was significantly lower after milk consumption compared to the orange drink (1.49 ± 0.72 vs. 2.33 ± 0.90 MJ, respectively; p = 0.005. There were no differences in AUC (× 1 h subjective appetite parameters (hunger, fullness and desire to eat between trials. The consumption of skimmed milk following 30 min of moderate-vigorous cycling exercise reduces subsequent energy intake in female recreational exercisers.

  12. Efficient technologies or user behaviour, which is the more important when reducing households' energy consumption?

    Energy Technology Data Exchange (ETDEWEB)

    Gram-Hanssen, K. [Danish Building Research Institute, Aalborg University, A.C. Meyers Vaenge 15, 2450 Copenhagen (Denmark)

    2013-08-15

    Much policy effort focuses on energy efficiency of technology, though not only efficiency but also user behaviour is an important factor influencing the amount of consumed energy. This paper explores to what extent energy efficiency of appliances and houses or user behaviour is the more important, both for understanding why some households consume much more energy than others, and when looking for relevant approaches to a future low-carbon society. The paper uses several sources to explore this question, most of them from a Danish context, including results from the researcher's own projects and Danish national statistics. These Danish data are discussed together with international studies. Through the presentation of these different projects and examples, it is shown how user behaviour is at least as important as the efficiency of technology when explaining households' energy consumption in Denmark. In the conclusion, these results are discussed in a broader international perspective and it is concluded that more research in this field is necessary. In relation to energy policy, it is argued that it is not a question of technology efficiency or behaviour, as both have to be included in future policy if energy demand is actually to be reduced. Furthermore, it is also argued that not only individual behaviour is relevant, but also a broader perspective on collectively shared low-carbon practices has to be promoted.

  13. Field-cycling-NMR: A new magnet design for reduced energy consumption

    Energy Technology Data Exchange (ETDEWEB)

    Plendl, Dirk; Privalov, Alexei F.; Fujara, Franz [Institut fuer Festkoerperphysik, TU Darmstadt (Germany)

    2010-07-01

    Field-cycling-NMR is an established method for the investigation of field dependent spin phenomena, like relaxation dispersion, polarization transfer, enhanced NQR etc. In contrast to normal NMR, the magnetic field in a field-cycling experiment is switched between several distinct levels within milliseconds. This can only be achieved with specially designed, low inductive magnets. Today, nearly all FC-spectrometers utilize air core coils made of copper or silver. Producing strong magnetic fields with normal-conducting magnets results in a large energy dissipation (tens of kW) so that the maximum field strength is limited by the amount of heat that can be extracted by the cooling system. We present a new magnet design for fast field-cycling-NMR which uses a magnet with an iron core for field amplification, thus generating the same field with significantly reduced energy consumption and system complexity.

  14. Energy consumption: energy consumption in mainland Norway

    Energy Technology Data Exchange (ETDEWEB)

    Magnussen, Inger Helene; Killingland, Magnus; Spilde, Dag

    2012-07-25

    The purpose of this report is to describe trends in energy consumption in mainland Norway, with an emphasis on key trends within the largest consumer groups. We also explain common terms and concepts in the field of energy consumption. Finally, we look at forecasts for future energy consumption, produced by bodies outside NVE. Total final energy consumption in mainland Norway in 2009 was 207 TWh. The most important end-user groups are households, service industries, manufacturing industry and transport. In addition, the energy sector in mainland Norway consumed 15 TWh. Energy consumed in the energy sector is not considered as final consumption, as the energy is used to produce new energy products. The long-term trend in energy consumption in mainland Norway is that fuel in the transport sector and electricity for the energy sector increases, while energy consumption in other sectors flattens out. The main reason for an increased use of fuel in the transport sector is the rise in the number of motorised machinery and vehicles in mainland Norway. This has caused a rise in gasoline and diesel consumption of 75 per cent since 1976. The petroleum sector is the largest consumer of energy within the energy sector in mainland Norway, and electricity from onshore to platforms in the North Sea and to new shore side installations has led to a rise in electricity consumption from 1 TWh in 1995 to 5 TWh in 2009. The energy consumption in households showed flat trend from 1996 to 2009, after many years of growth. The main reasons are a warmer climate, higher energy prices, the use of heats pumps and more energy-efficient buildings. In the service industries, the growth in energy consumptions has slightly decreased since the late 1990s, for much the same reasons as for households. In manufacturing industries the energy consumption have flatten out mainly due to the closure of energy-intensive businesses and the establishment of new more energy-efficient businesses. Electricity is

  15. The Presentation of an Optimal Transferring Message Model to Reducing Energy Consumption in Wireless Sensor Networks by Games Theory

    Directory of Open Access Journals (Sweden)

    Abdolreza Mohammadzadeh

    2016-06-01

    Full Text Available Wireless Sensor Networks (WSNs because of their limitation in energy consumption in their nodes, high rate of energy consumption and inability interchangeable battery, are always in danger of extiction. The highest energy consumption in these networks is done when communicating of the nodes with the base station (BS and sending infirmation, which itsreason is the limitation of BS in receiving and saving the incoming message. Now, if we will be able to increase the lifespan of these networks. So, a lot of algorithms and modelshas been suggested to reduce the energy consumption of WSNs. In this study, we have tried to present a new model in order to nodes cooperation in communicating with the BS and also reducing the number of messages by using games theory and exclusively enter market game (EMG.

  16. Reducing urban heat island effects to improve urban comfort and balance energy consumption in Bucharest (Romania)

    Science.gov (United States)

    Constantinescu, Dan; Ochinciuc, Cristina Victoria; Cheval, Sorin; Comşa, Ionuţ; Sîrodoev, Igor; Andone, Radu; Caracaş, Gabriela; Crăciun, Cerasella; Dumitrescu, Alexandru; Georgescu, Mihaela; Ianoş, Ioan; Merciu, Cristina; Moraru, Dan; Opriş, Ana; Paraschiv, Mirela; Raeţchi, Sonia; Saghin, Irina; Schvab, Andrei; Tătui-Văidianu, Nataşa

    2017-04-01

    technical solutions for mitigating the UHI impacts and sustainable reconfiguration of urban settlements, comprising packages of architectural and urban and landscape planning solutions. This study was funded by the Romanian Programme Partnership in Priority Domains, PN - II - PCCA - 2013 - 4 - 0509 - Reducing UHI effects to improve urban comfort and balance energy consumption in Bucharest (REDBHI).

  17. Reduced energy consumption by massive thermoelectric waste heat recovery in light duty trucks

    Science.gov (United States)

    Magnetto, D.; Vidiella, G.

    2012-06-01

    The main objective of the EC funded HEATRECAR project is to reduce the energy consumption and curb CO2 emissions of vehicles by massively harvesting electrical energy from the exhaust system and re-use this energy to supply electrical components within the vehicle or to feed the power train of hybrid electrical vehicles. HEATRECAR is targeting light duty trucks and focuses on the development and the optimization of a Thermo Electric Generator (TEG) including heat exchanger, thermoelectric modules and DC/DC converter. The main objective of the project is to design, optimize and produce a prototype system to be tested on a 2.3l diesel truck. The base case is a Thermo Electric Generator (TEG) producing 1 KWel at 130 km/h. We present the system design and estimated output power from benchmark Bi2Te3 modules. We discuss key drivers for the optimization of the thermal-to-electric efficiency, such as materials, thermo-mechanical aspects and integration.

  18. Reducing drying energy consumption by adsorbent property optimization in multistage systems

    NARCIS (Netherlands)

    Atuonwu, J.C.; Straten, G. van; Deventer, H.C. van; Boxtel, A.J.B. van

    2012-01-01

    This work presents a mixed integer nonlinear programming method for the design of energy efficient multistage adsorption dryers within product temperature and moisture constraints. The aim is to find the adsorbent type and properties that minimize specific energy consumption. The results show that t

  19. Designing Secure Clustering Protocol With The Approach Of Reducing Energy Consumption In Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Sanaz Sadeghi

    2013-07-01

    Full Text Available In recent years, many researchers have focused on wireless sensor networks and their applications. Toobtain scalability potential in these networks most of the nodes are categorized as distinct groups namedcluster and the node which is selected as cluster head or Aggregation Node offers the operation of datacollection from other cluster nodes and aggregation and sending it to the rest of the network. Clusteringand data aggregation increase network scalability and cause that limited resources of the network are usedwell. However, these mechanisms also make several breaches in the network, for example in clusterednetworks cluster head nodes areconsidered Desirable and attractive targets for attackers since reachingtheir information whether by physical attack and node capturing or by other attacks, the attacker canobtain the whole information of corresponding cluster. In this study secure clustering of the nodes areconsidered with the approach of reducing energy consumption of nodes and a protocol is presented that inaddition to satisfying Advanced security needs of wireless sensor networks reduces the amount of energyconsumption by the nodes. Due to network clustering there is scalability potential in such a network andAccording to frequent change of cluster head nodes load distribution is performed in the cluster andeventually increase the network lifetime.

  20. The potential for reducing urban air temperatures and energy consumption through vegetative cooling

    Energy Technology Data Exchange (ETDEWEB)

    Kurn, D.M.; Bretz, S.E.; Huang, B.; Akbari, H.

    1994-05-01

    A network of 23 weather stations was used to detect existing oases in Southern California. Four stations, separated from one another by 15--25 miles (24--40 km), were closely examined. Data were strongly affected by the distance of the stations from the Pacific Ocean. This and other city-scale effects made the network inadequate for detection of urban oases. We also conducted traverse measurements of temperature and humidity in the Whittier Narrows Recreation Area in Los Angeles County on September 8--10, 1993. Near-surface air temperatures over vegetated areas were 1--2{degrees}C lower than background air temperatures. We estimate that vegetation may lower urban temperatures by 1{degrees}C, while the establishment of vegetative canopies may lower local temperatures by an additional 2{degrees}C. An increase in vegetation in residential neighborhoods may reduce peak loads in the Los Angeles area by 0.3 GW, and reduce energy consumption by 0.2 BkWh/year, saving $20 million annually. Large additional savings would result from regional cooling.

  1. 200,000 jobs with reduced energy consumption; 200.000 Jobs mit weniger Energie

    Energy Technology Data Exchange (ETDEWEB)

    Wedekind, K.

    2007-07-15

    Modernisation of heating systems is still going slow in Germany. Most heating systems are still more than 20 years old. They consume too much energy and pollute the environment. The industrial association BDH intends to speed up the process and create 200,000 new jobs. (orig.)

  2. Identifying opportunities to reduce the consumption of energy across mining and processing plants

    Energy Technology Data Exchange (ETDEWEB)

    Sterling, David; Johnson, Greg

    2010-09-15

    In addition to meeting Government Policy on Energy Efficiency Opportunities (EEOs), mining and mineral processing companies are increasing energy efficiency to reduce costs in the current financial conditions. One of the major issues with EEOs is the lack of data available on energy use, and more importantly the energy use linked to production data, that identify energy reduction opportunities. This paper looks at expanding the use of a Manufacturing Execution Systems by integrating with Energy Solutions. This will provide automatic, timely information, at a granularity that makes it easier to identify EEOs, reduce energy costs, and better predict energy use.

  3. Cost/benefit tradeoffs for reducing the energy consumption of the commercial air transportation system

    Science.gov (United States)

    Kraus, E. F.; Vanabkoude, J. C.

    1976-01-01

    The fuel saving potential and cost effectiveness of numerous operational and technical options proposed for reducing the fuel consumption of the U.S. commercial airline fleet was examined and compared. The impact of the most promising fuel conserving options on fuel consumption, passenger demand, operating costs and airline profits when implemented in the U.S. domestic and international airline fleets was determined. A forecast estimate was made of the potential fuel savings achievable in the U.S. scheduled air transportation system. Specifically, the means for reducing the jet fuel consumption of the U.S. scheduled airlines in domestic and international passenger operations were investigated. A design analysis was made of two turboprop aircraft as possible fuel conserving derivatives of the DC-9-30.

  4. Reducing consumption through communal living

    Energy Technology Data Exchange (ETDEWEB)

    Herring, Horace [The Open Univ., Milton Keynes (United Kingdom). Energy and Environment Research Unit

    2003-07-01

    This paper examines ways consumers and communities can voluntarily adopt a low consumption (or low carbon) lifestyle, often termed 'voluntary simplicity' or a policy of 'sufficiency'. There is an increasing academic literature within Europe in the last five years on the whole question of 'sustainable consumption', and the relationship between income levels and consumption particularly at the household. This debate has moved beyond 'green consumerism' to look at building 'new concepts of prosperity' through local community actions, or reducing working time to allow more time for the creation of social capital. The paper will concentrate on one aspect of the quest for sustainable communities, the relevance of communal living to reducing consumption through examining energy consumption (both direct and indirect) in one such community in the UK. The results from this preliminary study reveal that it is not the sharing of resources that reduces consumption but the mutual reinforcement of attitudes towards a low consumption lifestyle. Thus it is the creation of social capital in a community that is its key to its ecological lifestyle.

  5. Profiting from negawatts: Reducing absolute consumption and emissions through a performance-based energy economy

    Energy Technology Data Exchange (ETDEWEB)

    Steinberger, Julia K. [IPTEH, Quartier Sorge-Bat. Amphipole, University of Lausanne, CH-1015-Lausanne (Switzerland); Institute of Social Ecology, Klagenfurt University, Schottenfeldg. 29, A-1070 Vienna (Austria)], E-mail: julia.steinberger@uni-klu.ac.at; Niel, Johan van [IPTEH, Quartier Sorge-Bat. Amphipole, University of Lausanne, CH-1015-Lausanne (Switzerland); CREIDD, University of Technology of Troyes, 12 rue Marie Curie, BP 2060, 10010 Troyes Cedex (France); Bourg, Dominique [IPTEH, Quartier Sorge-Bat. Amphipole, University of Lausanne, CH-1015-Lausanne (Switzerland)

    2009-01-15

    Current energy and GHG emissions policies either focus directly on emissions or promote renewable production and the implementation of specific efficiency measures. Meanwhile, the fundamental structure of the energy market based on profits through energy throughput remains largely unchallenged. This policy oversight prevents the transition to an energy economy in which profits are based on energy services delivered at the lowest energy cost: a performance-based energy economy (PBEE). The PBEE applies the combined concepts of the performance economy and energy services to the energy sector. Energy Service Companies (ESCOs) are discussed as an example of PBEE practices. The implications for energy suppliers and consumers as well as the conditions for PBEE diffusion and consequences for technological change are also explored. The expected environmental, social and economic benefits are described. However, absolute consumption and emissions reductions may prove elusive due to the rebound effect. In order to forestall rebound-led increases, complementary policy measures likely to lead to absolute reductions are required.

  6. Profiting from negawatts. Reducing absolute consumption and emissions through a performance-based energy economy

    Energy Technology Data Exchange (ETDEWEB)

    Steinberger, Julia K. [IPTEH, Quartier Sorge-Bat. Amphipole, University of Lausanne, CH-1015-Lausanne (Switzerland); Institute of Social Ecology, Klagenfurt University, Schottenfeldg. 29, A-1070 Vienna (Austria); van Niel, Johan [IPTEH, Quartier Sorge-Bat. Amphipole, University of Lausanne, CH-1015-Lausanne (Switzerland); CREIDD, University of Technology of Troyes, 12 rue Marie Curie, BP 2060, 10010 Troyes Cedex (France); Bourg, Dominique [IPTEH, Quartier Sorge-Bat. Amphipole, University of Lausanne, CH-1015-Lausanne (Switzerland)

    2009-01-15

    Current energy and GHG emissions policies either focus directly on emissions or promote renewable production and the implementation of specific efficiency measures. Meanwhile, the fundamental structure of the energy market based on profits through energy throughput remains largely unchallenged. This policy oversight prevents the transition to an energy economy in which profits are based on energy services delivered at the lowest energy cost: a performance-based energy economy (PBEE). The PBEE applies the combined concepts of the performance economy and energy services to the energy sector. Energy Service Companies (ESCOs) are discussed as an example of PBEE practices. The implications for energy suppliers and consumers as well as the conditions for PBEE diffusion and consequences for technological change are also explored. The expected environmental, social and economic benefits are described. However, absolute consumption and emissions reductions may prove elusive due to the rebound effect. In order to forestall rebound-led increases, complementary policy measures likely to lead to absolute reductions are required. (author)

  7. Efficient technologies or user behaviour, which is the more important when reducing households' energy consumption?

    DEFF Research Database (Denmark)

    Gram-Hanssen, Kirsten

    2013-01-01

    Much policy effort focuses on energy efficiency of technology, though not only efficiency but also user behaviour is an important factor influencing the amount of consumed energy. This paper explores to what extent energy efficiency of appliances and houses or user behaviour is the more important...... and Danish national statistics. These Danish data are discussed together with international studies. Through the presentation of these different projects and examples, it is shown how user behaviour is at least as important as the efficiency of technology when explaining households' energy consumption...... in Denmark. In the conclusion, these results are discussed in a broader international perspective and it is concluded that more research in this field is necessary. In relation to energy policy, it is argued that it is not a question of technology efficiency or behaviour, as both have to be included...

  8. Our building is smarter than your building: The use of competitive rivalry to reduce energy consumption and linked carbon footprint

    Directory of Open Access Journals (Sweden)

    Carolyn McGibbon

    2014-12-01

    Full Text Available This research is located within the smart city discourse and explores the linkage between smart buildings and an intelligent community, employing the University of Cape Town as a case study. It is also situated within the research stream of Green Information Systems, which examines the confluence between technology, people, data and processes, in order to achieve environmental objectives such as reduced energy consumption and its associated carbon footprint. Since approximately 80% of a university’s carbon footprint may be attributed to electricity consumption and as the portion of energy used inefficiently by buildings is estimated at 33% an argument may be made for seeing a campus as a “living laboratory” for energy consumption experiments in smart buildings. Integrated analytics were used to measure, monitor and mitigate energy consumption, directly linked to carbon footprinting. This paper examines a pilot project to reduce electricity consumption through a smart building competition. The lens used for this research was the empirical framework provided by the International Sustainable Campus Network/Global University Leadership Forum Charter. Preliminary findings suggest a link between the monitoring of smart buildings and behaviour by a segment of the intelligent community in the pursuit of a Sustainable Development strategy.

  9. REDUCING THE BOOSTER STATIONS ENERGY CONSUMPTION BY WAY OF ELIMINATING OVERPRESSURE IN THE WATER SUPPLY NETWORK

    Directory of Open Access Journals (Sweden)

    G. N. Zdor

    2015-01-01

    Full Text Available The energy efficiency improvement of the city housing-and-utilities infrastructure and watersupply and water-disposal systems poses an occurrent problem. The water-supply systems energy consumption sizable share falls on the pump plants. The article deals with the issues of the operating regime management of the existing booster stations equipped with a group of pumping units regulated with frequency converters. One of the optimization directions of their energy consumption is the reduction of over-pressure in the water-distribution network and its sustentation within the regulatory values. The authors offer the structure and methodology of the data collection-and-analysis automated system utilization for revealing and eliminating the overpressure in the water-supply network. This system is designed for the group management of booster-stations operating regimes on the ground of data obtained from the pressure controlling devices at the consumers. The data exchange in the system is realized via GSM.The paper presents results of the tests carried out at the booster stations in some major cities of the Republic of Belarus. The authors analyze dependence of overpressure in the network on the methods of the plant output pressure sustentation (daily graph or constant pressure. The authors study the elimination effect of over-pressure in the water distribution network on changing the booster station pumping units operation regimes. The study shows that eliminating over pressure in the water distributing network leads to lowering the booster station pressure. This in its turn decreases its energy consumption by 15–20 % depending on the over pressure fixed level.

  10. A PARAMETRIC STUDY ON EXERGETIC ASPECTS OF HYDROGEN ENERGY IN REDUCING FOSSIL FUEL CONSUMPTION

    Energy Technology Data Exchange (ETDEWEB)

    Adnan Midilli [Energy Division, Mechanical Engineering Department, Nigde University, Nigde (Turkey); Ibrahim Dincer [Faculty of Engineering and Applied Science, University of Ontario Institute of Technology, Oshawa, ON (Canada)

    2008-09-30

    This paper presents a parametric analysis on the exergetic dimension of hydrogen in reducing global fossil fuels consumption. Some key parameters such as fossil fuel based-global waste exergy factor, hydrogen based-global exergetic efficiency, and fossil fuel based-global irreversibility coefficient are proposed and studied in this regard. In order to verify these exergetic parameters, the actual fossil fuel consumption and production data are used as the base data in the analysis. Due to the unavailability of appropriate hydrogen data for the present study, it is assumed that the utilization ratio of hydrogen is practically ranged between 0 and 1. As a result, if exergetic utilization ratio of hydrogen from non-fossil fuel sources at a certain exergetic utilization ratio of fossil fuels increases, the fossil fuel based-global irreversibility coefficient will decrease.

  11. Development of supermarket refrigerators with reduced energy consumption; Entwicklung von Supermarkt - Kaelteanlagen mit reduziertem Energiebedarf

    Energy Technology Data Exchange (ETDEWEB)

    Heinrich, C.; Wobst, E. [Inst. fuer Luft- und Kaeltetechnik gGmbH, Dresden (Germany)

    2006-07-01

    Supermarket refrigeration is a considerable energy consumption factor. In this research project, dynamic simulations and experimental verifications were carried out of supermarket refrigeration systems. Experiments on systems in operation are difficult, so that appropriate computer models are required. The project was carried out as a cooperative project of two research institutes and two industrial organisations. The findings of the project were to be used for system optimisation. The findings suggest that savings of more than 10 percent are possible with comparatively little effort. The paper outlines the goals of the project, the procedure, and preliminary results. (orig.)

  12. Measures to reduce industrial consumption of petroleum under a short-term energy emergency

    Energy Technology Data Exchange (ETDEWEB)

    Tessmer, R.G. Jr; D' Acierno, J.; Pilati, D.A.

    1979-02-01

    Significant opportunities for petroleum conservation in the industrial sector in the event of an energy emergency are discussed. The most feasible government options identified are presented. These and the probable savings are: removing institutional barriers to fuel switching in industrial boilers and burners (384 to 407 Mbbl/day); rescinding certain air pollution regulations (19 to 100 Mbbl/day); restricting export of energy-intensive goods (20 to 60 Mbbl/day); rescinding thermal pollution regulations for power plants (16 to 27 Mbbl/day); removing trade barriers on certain imports; restricting electricity production by industry; and restricting export of recyclable materials. The bases for many of the recommended options are presented. Specifically, characteristics of industrial petroleum consumption for the chemical, steel, cement, and paper industries are presented.

  13. Maternal Dietary Counseling Reduces Consumption of Energy-Dense Foods among Infants: A Randomized Controlled Trial

    Science.gov (United States)

    Vitolo, Marcia Regina; Bortolini, Gisele Ane; Campagnolo, Paula Dal Bo; Hoffman, Daniel J.

    2012-01-01

    Objective: To evaluate the impact of a dietary counseling in reducing the intake of energy-dense foods by infants. Design: A randomized controlled trial. Setting and Participants: Sao Leopoldo, Brazil. Mothers and infants of a low-income-group population were randomized into intervention (n = 163) and received dietary counseling during 10 home…

  14. Maternal Dietary Counseling Reduces Consumption of Energy-Dense Foods among Infants: A Randomized Controlled Trial

    Science.gov (United States)

    Vitolo, Marcia Regina; Bortolini, Gisele Ane; Campagnolo, Paula Dal Bo; Hoffman, Daniel J.

    2012-01-01

    Objective: To evaluate the impact of a dietary counseling in reducing the intake of energy-dense foods by infants. Design: A randomized controlled trial. Setting and Participants: Sao Leopoldo, Brazil. Mothers and infants of a low-income-group population were randomized into intervention (n = 163) and received dietary counseling during 10 home…

  15. Reducing agitation energy-consumption by improving rheological properties of corn stover substrate in anaerobic digestion.

    Science.gov (United States)

    Tian, Libin; Shen, Fei; Yuan, Hairong; Zou, Dexun; Liu, Yanping; Zhu, Baoning; Li, Xiujin

    2014-09-01

    Rheological properties of corn stover substrate were investigated to explore agitation energy reduction potential for different total solid (TS) in anaerobic digestion. The effects of particle size and temperature on rheological properties and corresponding energy reduction were studied. The results indicated that corn stover slurry exhibited pseudo-plastic flow behavior at TS of 4.23-7.32%, and was well described by Power-law model. At TS of 4.23%, rheological properties were not obviously affected by particle size and temperature. However, when TS was increased to 7.32%, there was 10.37% shear stress reduction by size-reduction from 20 to 80-mesh, and 11.73% shear stress reduction by temperature-increase from 25 to 55 °C. PTS was advanced as variations of power consumption by TS-increase from 4.23% to 7.32%. There was 9.2% PTS-reduction by size-reduction from 20 to 80-mesh at 35 °C. Moreover, PTS-reduction of 10.3%/10 °C was achieved at 20-mesh compared with 9.0%/10 °C at 80-mesh.

  16. Energy Consumption vs. Energy Requirement

    Science.gov (United States)

    Fan, L. T.; Zhang, Tengyan; Schlup, John R.

    2006-01-01

    Energy is necessary for any phenomenon to occur or any process to proceed. Nevertheless, energy is never consumed; instead, it is conserved. What is consumed is available energy, or exergy, accompanied by an increase in entropy. Obviously, the terminology, "energy consumption" is indeed a misnomer although it is ubiquitous in the…

  17. Energy-consumption modelling

    Energy Technology Data Exchange (ETDEWEB)

    Reiter, E.R.

    1980-01-01

    A highly sophisticated and accurate approach is described to compute on an hourly or daily basis the energy consumption for space heating by individual buildings, urban sectors, and whole cities. The need for models and specifically weather-sensitive models, composite models, and space-heating models are discussed. Development of the Colorado State University Model, based on heat-transfer equations and on a heuristic, adaptive, self-organizing computation learning approach, is described. Results of modeling energy consumption by the city of Minneapolis and Cheyenne are given. Some data on energy consumption in individual buildings are included.

  18. An efficient methodology for utilization of K-feldspar and phosphogypsum with reduced energy consumption and CO2 emissions

    Institute of Scientific and Technical Information of China (English)

    Zhixi Gan; Zheng Cui; Hairong Yue; Siyang Tang; Changjun Liu; Chun Li; Bin Liang; Heping Xie

    2016-01-01

    The issues of reducing CO2 emissions, sustainably utilizing natural mineral resources, and dealing with industrial waste offer challenges for sustainable development in energy and the environment. We propose an efficient methodology via the co-reaction of K-feldspar and phosphogypsum for the extraction of soluble potassium salts and recovery of SO2 with reduced CO2 emission and energy consumption. The results of characterization and reactivity evaluation indicated that the partial melting of K-feldspar and phosphogypsum in the high-temperature co-reaction significantly facilitated the reduction of phosphogypsum to SO2 and the exchange of K+(K-feldspar) with Ca2+(CaSO4 in phosphogypsum). The reaction parameters were systematical y investigat-ed with the highest sulfur recovery ratio of~60%and K extraction ratio of~87.7%. This novel methodology possesses an energy consumption reduction of~28%and CO2 emission reduction of~55%comparing with the present typical commercial technologies for utilization of K-feldspar and the treatment of phosphogypsum.

  19. Determining cement ball mill dosage by artificial intelligence tools aimed at reducing energy consumption and environmental impact

    Directory of Open Access Journals (Sweden)

    Julio R. Gómez Sarduy

    2012-10-01

    Full Text Available Energy management systems can be improved by using artificial intelligence techniques such as neural networks and genetic algorithms for modelling and optimising equipment and system energy consumption. This paper proposes modelling ball mill consumption as used in the cement industry from field variables. The regression model was based on artificial neural networks for predicting the electricity consumption of the mill’s main drive and evaluating established consumption rate performance. This research showed the influence of the amount of pozzolanic ash, gypsum and clinker on a mill’s power consumption; the dose determined according to the model ensured minimum energy consumption using a simple genetic algorithm. The estimated savings potential from the proposed dose was 36 600 kWh / year for mill number 1, representing $5,793.78 / year and a 33,708 kg CO2 / year reduction in the environmental impact of gas left to escape.

  20. Energy and resource consumption

    Science.gov (United States)

    1973-01-01

    The present and projected energy requirements for the United States are discussed. The energy consumption and demand sectors are divided into the categories: residential and commercial, transportation, and industrial and electrical generation (utilities). All sectors except electrical generation use varying amounts of fossile fuel resources for non-energy purposes. The highest percentage of non-energy use by sector is industrial with 71.3 percent. The household and commercial sector uses 28.4 percent, and transportation about 0.3 percent. Graphs are developed to project fossil fuel demands for non-energy purposes and the perdentage of the total fossil fuel used for non-energy needs.

  1. Use of Local Intelligence to Reduce Energy Consumption of Wireless Sensor Nodes in Elderly Health Monitoring Systems

    Directory of Open Access Journals (Sweden)

    Thomas J. Lampoltshammer

    2014-03-01

    Full Text Available The percentage of elderly people in European countries is increasing. Such conjuncture affects socio-economic structures and creates demands for resourceful solutions, such as Ambient Assisted Living (AAL, which is a possible methodology to foster health care for elderly people. In this context, sensor-based devices play a leading role in surveying, e.g., health conditions of elderly people, to alert care personnel in case of an incident. However, the adoption of such devices strongly depends on the comfort of wearing the devices. In most cases, the bottleneck is the battery lifetime, which impacts the effectiveness of the system. In this paper we propose an approach to reduce the energy consumption of sensors’ by use of local sensors’ intelligence. By increasing the intelligence of the sensor node, a substantial decrease in the necessary communication payload can be achieved. The results show a significant potential to preserve energy and decrease the actual size of the sensor device units.

  2. REDUCING ENERGY CONSUMPTION BY PASSENGER CAR WITH USING OF NON-ELECTRICAL HYBRID DRIVE TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Tomas Skrucany

    2017-03-01

    Full Text Available Not only electrical hybrid technology is used for drivetrain of passenger cars. Also other systems using non-electrical principles (hydraulic or air pressure, mechanical energy storage can be found in current vehicles. There is a quantification of the spared energy by using a hybrid vehicle in the paper. Driving cy-cle ECE 15 was chosen as a platform for simulation of driving resistances.

  3. Hybrid PSO-SA Type Algorithms for Multimodal Function Optimization and Reducing Energy Consumption in Embedded Systems

    Directory of Open Access Journals (Sweden)

    Lhassane Idoumghar

    2011-01-01

    When a local optimal solution is reached with PSO, all particles gather around it, and escaping from this local optima becomes difficult. To avoid premature convergence of PSO, we present a new hybrid evolutionary algorithm, called HPSO-SA, based on the idea that PSO ensures fast convergence, while SA brings the search out of local optima because of its strong local-search ability. The proposed HPSO-SA algorithm is validated on ten standard benchmark multimodal functions for which we obtained significant improvements. The results are compared with these obtained by existing hybrid PSO-SA algorithms. In this paper, we provide also two versions of HPSO-SA (sequential and distributed for minimizing the energy consumption in embedded systems memories. The two versions, of HPSO-SA, reduce the energy consumption in memories from 76% up to 98% as compared to Tabu Search (TS. Moreover, the distributed version of HPSO-SA provides execution time saving of about 73% up to 84% on a cluster of 4 PCs.

  4. Do biofuel blending mandates reduce gasoline consumption? Implications of state-level renewable fuel standards for energy security

    Science.gov (United States)

    Lim, Shinling

    In an effort to keep America's addiction to oil under control, federal and state governments have implemented a variety of policy measures including those that determine the composition of motor gasoline sold at the pump. Biofuel blending mandates known as Renewable Fuel Standards (RFS) are designed to reduce the amount of foreign crude oil needed to be imported as well as to boost the local ethanol and corn industry. Yet beyond looking at changes in gasoline prices associated with increased ethanol production, there have been no empirical studies that examine effects of state-level RFS implementation on gasoline consumption. I estimate a Generalized Least Squares model for the gasoline demand for the 1993 to 2010 period with state and time fixed effects controlling for RFS. States with active RFS are Minnesota, Hawaii, Missouri, Florida, Washington, and Oregon. I find that, despite the onset of federal biofuel mandates across states in 2007 and the lower energy content of blended gasoline, being in a state that has implemented RFS is associated with 1.5% decrease in gasoline consumption (including blended gasoline). This is encouraging evidence for efforts to lessen dependence on gasoline and has positive implications for energy security.

  5. Modeling electrical stimulation of retinal ganglion cell with optimizing additive noises for reducing threshold and energy consumption.

    Science.gov (United States)

    Wu, Jing; Jin, Menghua; Qiao, Qingli

    2017-03-27

    Epiretinal prosthesis is one device for the treatment of blindness, which target retinal ganglion cells (RGCs) by electrodes on retinal surface. The stimulating current of epiretinal prosthesis is an important factor that influences the safety threshold and visual perception. Stochastic resonance (SR) can be used to enhance the detection and transmission of subthreshold stimuli in neurons. Here, it was assumed that SR was a potential way to improve the performance of epiretinal prosthesis. The effect of noises on the response of RGCs to electrical stimulation and the energy of stimulating current was studied based on a RGC model. The RGC was modeled as a multi-compartment model consisting of dendrites and its branches, soma and axon. To evoke SR, a subthreshold signal, a series of bipolar rectangular pulse sequences, plus stochastic biphasic pulse sequences as noises, were used as a stimulus to the model. The SR-type behavior in the model was characterized by a "power norm" measure. To decrease energy consumption of the stimulation waveform, the stochastic biphasic pulse sequences were only added to the cathode and anode phase of the subthreshold pulse and the noise parameters were optimized by using a genetic algorithm (GA). When certain intensity of noise is added to the subthreshold signal, RGC model can fire. With the noise's RMS amplitudes increased, more spikes were elicited and the curve of power norm presents the inverted U-like graph. The larger pulse width of stochastic biphasic pulse sequences resulted in higher power norm. The energy consumption and charges of the single bipolar rectangular pulse without noise in threshold level are 468.18 pJ, 15.30 nC, and after adding optimized parameters's noise to the subthreshold signal, they became 314.8174 pJ, 11.9281 nC and were reduced by 32.8 and 22.0%, respectively. The SR exists in the RGC model and can enhance the representation of RGC model to the subthreshold signal. Adding the stochastic biphasic

  6. ROUTE OPTIMIZATION TO INCREASE ENERGY EFFICIENCY AND REDUCE FUEL CONSUMPTION OF COMMUNAL VEHICLES

    Directory of Open Access Journals (Sweden)

    Nebojša M Jovičić

    2010-01-01

    Full Text Available Collection and transportation within the system of solid waste management may account more than 60% of the overall budget, most of which is for fuel costs. Furthermore, municipal vehicles have great environmental impact through exhaust gases emissions. The aim of this research was to estimate the potential for reduction of fuel consumption and thus the emission of CO2 through the communal vehicles route optimization. General methodology for route optimization is also presented. For the area under study, detailed field experimental research in the City of Kragujevac was conducted. Using GIS and GPS technology, whole municipally infrastructure for waste collection was scanned and all paths of communal tracks was recorded and allocated in developed database. Based on experimental and numerical results, one typical municipal vehicle route was analyzed by using ArcGis software. The obtained result indicates 2700 km of possible savings per year concerning one communal vehicle. In addition, the most fuel-economical route was extracted and compared with the original route, and with the routes extracted from criterions concerning the traffic time and shortest distance. According to available information for the City of Kragujevac and the results from this study, it was estimated that the total savings could be 20% in costs and the associated emissions.

  7. Strategies for Reducing Energy Consumption in a Student Cafeteria in a Hot-Humid Climate: A Case Study

    Directory of Open Access Journals (Sweden)

    Mohammed Alhaji Mohammed

    2013-03-01

    Full Text Available Increasing attention is being given to energy consumption and potential for energy savings in public buildings in order to improve energy performance. Due to their size and functional requirements, public buildings especially cafeteria facilities tend to consume a significant amount of energy. Furthermore, due to their operational characteristics and construction pattern, unnecessary energy is likely to be used for maintaining acceptable indoor environmental quality. In this study, a student cafeteria at King Fahd University of Petroleum and Minerals, Saudi Arabia, was selected for the assessment of its energy performance and potential energy conservation opportunities. Energy simulation software Visual DOE 4.1 was used to develop an energy performance model for assessing various energy conservation measures pertinent to the building envelope and HVAC system design. Data required for setting up the model were gathered through simple energy audits. The architectural and mechanical drawings and the history of electrical consumption were collected. Various energy conservation strategies were then implemented including standards, single and combined energy conservation measures. These measures resulted in a combined design saving of 27.4%, the HVAC system saving 10.6%, implementation of standards saving about 16.7%, lighting 6.6%, equipment 2.6%, insulation 2.5% and glazing 1.4%. Based on these results, it is apparent that there is a significant potential for improving energy performance and justification to employ the suggested measures for achieving substantial energy savings and minimize energy consumption.

  8. Schooling reduces energy consumption in swimming male European eels, Anguilla anguilla L.

    NARCIS (Netherlands)

    Burgerhout, E.; Tudorache, C.; Brittijn, S.A.; Palstra, A.P.; Dirks, R.P.; Thillart, G.E.E.J.M.

    2013-01-01

    During migration, swimming in schools provides fish with a number of behavioural and ecological advantages, including increased food supply and reduced predation risk. Previous work shows that carangiform and tunniform swimming result in energetic advantages for individuals using a diamond swimming

  9. Schooling reduces energy consumption in swimming male European eels, Anguilla anguilla L.

    NARCIS (Netherlands)

    Burgerhout, E.; Tudorache, C.; Brittijn, S.A.; Palstra, A.P.; Dirks, R.P.; Thillart, G.E.E.J.M.

    2013-01-01

    During migration, swimming in schools provides fish with a number of behavioural and ecological advantages, including increased food supply and reduced predation risk. Previous work shows that carangiform and tunniform swimming result in energetic advantages for individuals using a diamond swimming

  10. Can polarized lighting panels reduce energy consumption and improve visibility in building interiors

    Energy Technology Data Exchange (ETDEWEB)

    Berman, S.; Clear, R.

    1979-08-01

    The lighting and vision literature, materials on management science and the reflectivity of surfaces are reviewed. The analysis emphasized the connection between lighting design and productivity. It is concluded that polarizing panels should be included among the alternatives normally considered by the lighting designer to utilize energy more efficiently than normal general lighting systems using standard prismatic or diffusing panels. A lighting design using polarizing panels might use 1/4 to 1/3 less energy than a reference system using standard prismatic panels without compromising function. The estimate of the potential energy savings available with polarizing panels is based on the estimate of their efficiency at producing Equivalent Spherical Illumination (ESI). ESI combines the effects of luminance and contrast into a single figure of merit for visibility. A short history and some background of ESI and a discussion of the measured reflectivities of paper and pencil on paper are presented. These data are used in ESI calculations. The problems and limitations of evaluating lighting systems strictly in terms of ESI per watt (or dollar) are discussed. An attempt was made to evaluate polarizing panels in terms of the factors discussed. Additional information is provided in 4 appendices.

  11. Can polarized lighting panels reduce energy consumption and improve visibility in building interiors

    Energy Technology Data Exchange (ETDEWEB)

    Berman, S.; Clear, R.

    1979-08-01

    The lighting and vision literature, materials on management science and the reflectivity of surfaces are reviewed. The analysis emphasized the connection between lighting design and productivity. It is concluded that polarizing panels should be included among the alternatives normally considered by the lighting designer to utilize energy more efficiently than normal general lighting systems using standard prismatic or diffusing panels. A lighting design using polarizing panels might use 1/4 to 1/3 less energy than a reference system using standard prismatic panels without compromising function. The estimate of the potential energy savings available with polarizing panels is based on the estimate of their efficiency at producing Equivalent Spherical Illumination (ESI). ESI combines the effects of luminance and contrast into a single figure of merit for visibility. A short history and some background of ESI and a discussion of the measured reflectivities of paper and pencil on paper are presented. These data are used in ESI calculations. The problems and limitations of evaluating lighting systems strictly in terms of ESI per watt (or dollar) are discussed. An attempt was made to evaluate polarizing panels in terms of the factors discussed. Additional information is provided in 4 appendices.

  12. Comprehending Consumption: The Behavioral Basis and Implementation of Driver Feedback for Reducing Vehicle Energy Use

    Science.gov (United States)

    Stillwater, Tai

    A large body of evidence suggests that drivers who receive real-time fuel economy information can increase their vehicle fuel economy by 5%, a process commonly known as ecodriving. However, few studies have directly addressed the human side of the feedback, that is, why drivers would (or would not) be motivated to change their behavior and how to design feedback devices to maximize the motivation to ecodrive. This dissertation approaches the question using a mixed qualitative and quantitative approach to explore driver responses and psychology as well as to quantify the process of behavior change. The first chapter discusses the use of mile-per-gallon fuel economy as a metric for driver feedback and finds that an alternative energy economy metric is superior for real-time feedback. The second chapter reviews behavioral theories and proposes a number of practical solutions for the ecodriving context. In the third chapter the theory of planned behavior is tested against driver responses to an existing feedback system available in the 2008 model Toyota Prius. The fourth chapter presents a novel feedback design based on behavioral theories and drivers' responses to the feedback. Finally, chapter five presents the quantitative results of a natural-driving study of fuel economy feedback. The dissertation findings suggest that behavior theories such as the Theory of Planned Behavior can provide important improvements to existing feedback designs. In addition, a careful analysis of vehicle energy flows indicates that the mile-per-gallon metric is deeply flawed as a real-time feedback metric, and should be replaced. Chapters 2 and 3 conclude that behavior theories have both a theoretical and highly practical role in feedback design, although the driving context requires just as much care in the application. Chapters 4 and 5 find that a theory-inspired interface provides drivers with engaging and motivating feedback, and that integrating personal goal into the feedback is

  13. In situ evaluation of water and energy consumptions at the end use level: The influence of flow reducers and temperature in baths.

    Science.gov (United States)

    Matos, C; Briga-Sá, A; Bentes, I; Faria, D; Pereira, S

    2017-05-15

    Nowadays, water and energy consumption is intensifying every year in most of the countries. This perpetual increase will not be supportable in the long run, making urgently to manage these resources on a sustainable way. Domestic consumptions of water and electric energy usually are related and it's important to study that relation, identifying opportunities for use efficient improvement. In fact, without an understanding of water-energy relations, there are water efficiency measures that may lead to unintentional costs in the energy efficiency field. In order to take full advantage of combined effect between water and energy water management methodologies, it is necessary to collect data to ensure that the efforts are directed through the most effective paths. This paper presents a study based in the characterization, measurement and analysis of water and electricity consumption in a single family house (2months period) in order to find an interdependent relationship between consumptions at the end user level. The study was carried out on about 200 baths, divided in four different scenarios where the influence of two variables was tested: the flow reducer valve and the bath temperature. Data showed that the presence of flow reducer valve decreased electric energy consumption and water consumption, but increased the bath duration. Setting a lower temperature in water-heater, decreased electric consumption, water consumption and bath duration. Analysing the influence of the flow reducer valve and 60°C temperature simultaneously, it was concluded that it had a significant influence on electric energy consumption and on the baths duration but had no influence on water consumption.

  14. A biological/chemical process for reduced waste and energy consumption: caprolactam production. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-01

    A biological/chemical process for converting cyclohexane into caprolactam was investigated: microorganisms in a bioreactor would be used to convert cyclohexane into caprolactone followed by chemical synthesis of caprolactam using ammonia. Four microorganisms were isolated from natural soil and water, that can utilize cyclohexane as a sole source of C and energy for growth. They were shown to have the correct metabolic intermediates and enzymes to convert cyclohexane into cyclohexanol, cyclohexanone, and caprolactone. Genetic techniques to create and select for caprolactone hydrolase negative-mutants were developed; those are used to convert cyclohexane into caprolactone but, because of the block, are unable to metabolize the caprolactone further. Because of a new nylon carpet reycle process and the long time frame for a totally new bioprocess, a limited study was done to evaluate whether a simplified bioprocess to convert cyclohexanol into cyclohexanone or caprolactone was feasible; growth rates and key enzyme levels were measured in a collection of microorganisms that metabolize cyclohexanol to determine if the bioactivity is high enough to support an economical cyclohexanol bioprocess. Although these microorganisms had sufficient bioactivity, they could tolerate only low levels (<1%) of cyclohexanol and thus are not suitable for developing a cost effective bioprocess because of the high cost of dilute product recovery.

  15. An Analysis of the Use of Energy Audits, Solar Panels, and Wind Turbines to Reduce Energy Consumption from Non Renewable Energy Sources

    Science.gov (United States)

    2015-04-15

    a need to reduce water consumption whenever possible. Congress issued the initial guidelines for flow control in various plumbing products via the...SVSIMI Electronic stall regulation with redundant relay SWitch control Cut-In Wind Speed 8 mph (3.6 m/s) Ra’-«1 Wind Speed 29 mph(13 mls) u- eontrol...audits on seventeen FVSU buildings. Overall, the audits included electricity, natural gas, and water consumption . Systems evaluated included lighting

  16. Green Supply Chain Management Using the Queuing Theory to Handle Congestion and Reduce Energy Consumption and Emissions From Supply Chain Transportation Fleet

    OpenAIRE

    Arvin Aziziankohan; Fariborz Jolai; Mohammad Khalilzadeh; Roya Soltani; Reza Tavakkoli-Moghaddam

    2017-01-01

    Purpose: Nowadays, governments and people pay more attention to use green products due to environmental pollution, irreplaceable energy and shortage of resources. Green products are resulted from the application of green supply chain management strategies to the organizations' performance strategies, so that we can reduce environmental pollutants and wastes and take a step towards saving energy with limited resources. Methodology:  In this paper, the effect of reducing energy consumption ...

  17. Learning to REDUCE: A Reduced Electricity Consumption Prediction Ensemble

    Energy Technology Data Exchange (ETDEWEB)

    Aman, Saima; Chelmis, Charalampos; Prasanna, Viktor

    2016-02-12

    Utilities use Demand Response (DR) to balance supply and demand in the electric grid by involving customers in efforts to reduce electricity consumption during peak periods. To implement and adapt DR under dynamically changing conditions of the grid, reliable prediction of reduced consumption is critical. However, despite the wealth of research on electricity consumption prediction and DR being long in practice, the problem of reduced consumption prediction remains largely un-addressed. In this paper, we identify unique computational challenges associated with the prediction of reduced consumption and contrast this to that of normal consumption and DR baseline prediction.We propose a novel ensemble model that leverages different sequences of daily electricity consumption on DR event days as well as contextual attributes for reduced consumption prediction. We demonstrate the success of our model on a large, real-world, high resolution dataset from a university microgrid comprising of over 950 DR events across a diverse set of 32 buildings. Our model achieves an average error of 13.5%, an 8.8% improvement over the baseline. Our work is particularly relevant for buildings where electricity consumption is not tied to strict schedules. Our results and insights should prove useful to the researchers and practitioners working in the sustainable energy domain.

  18. Energy drink consumption is associated with reduced sleep quality among college students: a cross-sectional study.

    Science.gov (United States)

    Faris, Mo'ez Al-Islam E; Jahrami, Haitham; Al-Hilali, Marwa M; Chehyber, Noor J; Ali, Sara O; Shahda, Sara D; Obaid, Reyad S

    2017-07-01

    Intake of caffeinated energy drinks has significantly increased, specifically among young adults and adolescents. College students are prone to developing unhealthy eating habits and dependence on stimulants, which puts them at a greater risk of sleep problems. This study aims to investigate the prevalence of caffeinated energy drink consumption and its association with sleep quality in college students. A sample of 919 randomly selected adults (237 males and 682 females) from various colleges at the University of Sharjah/United Arab Emirates participated in this cross-sectional study. Data were collected using an online validated questionnaire. The current study revealed that 376 students (41%) were consuming energy drinks on a regular basis. Approximately half of the students had normal sleep patterns; the other half had sleep problems (anxiety and intermittent sleep). Results of the present study revealed a significant (r = -0.10, P consumption of energy drinks and sleep quality and patterns. Moderate consumption of energy drinks was reported among college students. Consumption of energy drinks was significantly associated with changes in sleep quality and patterns of students. © 2016 Dietitians Association of Australia.

  19. Reducing Idle Power Consumption in Office Spaces Saves U.S. Navy in Energy Costs (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2014-04-01

    As part of a two-year project to demonstrate energy efficiency measures, renewable energy generation, and energy systems integration, the National Renewable Energy Laboratory (NREL) has identified advanced plug load controls as a promising technology for reducing energy use and related costs in the U.S. Navy's Naval Facilities Engineering Command (NAVFAC) office spaces.

  20. Energy consumption: Past, present, future

    Science.gov (United States)

    1973-01-01

    The energy consumption history of the United States and the changes which could occur in consumption characteristics in the next 50 years are presented. The various sources of energy are analyzed to show the limitations involved in development and utilization as a function of time available. Several scenarios were prepared to show the consumption and supply of energy under varying conditions.

  1. Moral Violations Reduce Oral Consumption.

    Science.gov (United States)

    Chan, Cindy; Van Boven, Leaf; Andrade, Eduardo B; Ariely, Dan

    2014-07-01

    Consumers frequently encounter moral violations in everyday life. They watch movies and television shows about crime and deception, hear news reports of corporate fraud and tax evasion, and hear gossip about cheaters and thieves. How does exposure to moral violations influence consumption? Because moral violations arouse disgust and because disgust is an evolutionarily important signal of contamination that should provoke a multi-modal response, we hypothesize that moral violations affect a key behavioral response to disgust: reduced oral consumption. In three experiments, compared with those in control conditions, people drank less water and chocolate milk while (a) watching a film portraying the moral violations of incest, (b) writing about moral violations of cheating or theft, and (c) listening to a report about fraud and manipulation. These findings imply that "moral disgust" influences consumption in ways similar to core disgust, and thus provide evidence for the associations between moral violations, emotions, and consumer behavior.

  2. Determination of feasibility and advantages of using additional turbines to reduce energy consumption and CO2 emission of a distillation column

    Directory of Open Access Journals (Sweden)

    Svang-Ariyaskul Apichit

    2014-01-01

    Full Text Available Distillation is a process that consumes an extensive amount of energy and emits an enormous amount of CO2. It is attractive to reduce the energy consumption and CO2 emission for distillation. A new design of distillation is proposed by adding turbines in the vapor process streams before the condenser and after a reboiler to produce domestic electricity. As a result, this new design helps in reducing energy consumption and CO2 emission. The key variables are the distillate to feed ratio and the reflux ratio because they are the direct factors that control the vapor flowrates supplying the turbines. The distillation of an alkane mixture of C4 - C8 commonly found in a petroleum refinery was used as a test model to prove the process feasibility. The energy consumption and CO2 emission of the new process are reduced to 0.93 - 0.96 and 0.89 - 0.90 of the conventional process, respectively. This new design increases process efficiency in terms of second law efficiency by reducing the entropy generation from the conventional distillation at low distillate to feed ratios and reflux ratios. The distillation with additional turbines is promising to reduce energy consumption and CO2 emission and to increase process efficiency.

  3. A New Method for Low Cost Production of Titanium Alloys for Reducing Energy Consumption of Mechanical Systems

    Energy Technology Data Exchange (ETDEWEB)

    Fang, Z. Zak [Univ. of Utah, Salt Lake City, UT (United States); Chandran, Ravi [Univ. of Utah, Salt Lake City, UT (United States); Koopman, Mark [Univ. of Utah, Salt Lake City, UT (United States)

    2016-02-29

    This project investigated an innovative manufacturing process intended to minimize the cost of production of titanium materials and components, and increase the adoption of Ti components for energy consuming applications, such as automobiles. A key innovation of the proposed manufacturing approach is a novel Ti powder sintering technology for making titanium materials with ultrafine grain microstructure in the as-sintered state with minimum, or an absence, of post-sintering processes. The new sintering technology is termed Hydrogen Sintering and Phase Transformations (HSPT), and constitutes a promising manufacturing technology that can be used to produce titanium (Ti) materials and components in a near-net-shape form, thus also minimizing machining costs. Our objective was to meet, or possibly surpass, the mechanical property levels for ASTM B348 Grade 5 for wrought Ti-6Al-4V. Although specific applications call for varying mechanical property requirements, ASTM B348 was created for the demanding applications of the aerospace industry, and is the established standard for Ti-6Al-4V. While the primary goal was to meet, or exceed this standard, the team also had the goal of demonstrating this could be done at a significantly lower cost of production. Interim goals of the project were to fully develop this novel sintering process, and provide sufficient baseline testing to make the method practical and attractive to industry. By optimizing the process parameters for the sintering of titanium hydride (TiH2) powders in a hydrogen atmosphere and controlling the phase transformations during and after sintering, the HSPT process was expected to reduce the energy consumption, and thus cost, of making Ti alloys and fabricating Ti components. The process was designed such that no high temperature melting is required for producing Ti alloys; little or no post-sintering processing is needed for producing desired microstructures (and therefore enhanced mechanical

  4. Potential for the Use of Energy Savings Performance Contracts to Reduce Energy Consumption and Provide Energy and Cost Savings in Non-Building Applications

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Charles; Green, Andrew S.; Dahle, Douglas; Barnett, John; Butler, Pat; Kerner, David

    2013-08-01

    The findings of this study indicate that potential exists in non-building applications to save energy and costs. This potential could save billions of federal dollars, reduce reliance on fossil fuels, increase energy independence and security, and reduce greenhouse gas emissions. The Federal Government has nearly twenty years of experience with achieving similar energy cost reductions, and letting the energy costs savings pay for themselves, by applying energy savings performance contracts (ESPC) inits buildings. Currently, the application of ESPCs is limited by statute to federal buildings. This study indicates that ESPCs can be a compatible and effective contracting tool for achieving savings in non-building applications.

  5. "Movable platform" - the idea and energy consumption

    OpenAIRE

    Czesław PYPNO; Margielewicz, Jerzy; Gąska, Damian

    2011-01-01

    This paper presents the application of the concept of moving sidewalks at railway stations (the movable platform) including the calculation of electricity consumption. Particular focus was placed on issue of energy profit and loss in two stages - through the loss (consumption) of energy by using a moving sidewalk at a railway station platform and the profit (reduced consumption) of energy, by the lack of having to start the train, that supports movable platform, from the initial speed of 0 km/h.

  6. Experimental Evaluation of Simple Thermal Storage Control Strategies in Low-Energy Solar Houses to Reduce Electricity Consumption during Grid On-Peak Periods

    Directory of Open Access Journals (Sweden)

    Kyoung-Ho Lee

    2015-08-01

    Full Text Available There is growing interest in zero-energy and low-energy buildings, which have a net energy consumption (on an annual basis of almost zero. Because they can generate both electricity and thermal energy through the use of solar photovoltaic (PV and solar thermal collectors, and with the help of reduced building thermal demand, low-energy buildings can not only make a significant contribution to energy conservation on an annual basis, but also reduce energy consumption and peak demand. This study focused on electricity consumption during the on-peak period in a low-energy residential solar building and considers the use of a building’s thermal mass and thermal storage to reduce electricity consumption in summer and winter by modulation of temperature setpoints for heat pump and indoor thermostats in summer and additional use of a solar heating loop in winter. Experiments were performed at a low-energy solar demonstration house that has solar collectors, hot water storage, a ground-coupled heat pump, and a thermal storage tank. It was assumed that the on-peak periods were from 2 pm to 5 pm on hot summer days and from 5 pm to 8 pm on cold winter days. To evaluate the potential for utilizing the building’s thermal storage capacity in space cooling and heating, the use of simple control strategies on three test days in summer and two test days in the early spring were compared in terms of net electricity consumption and peak demand, which also considered the electricity generation from solar PV modules on the roof of the house.

  7. Cost/benefit tradeoffs for reducing the energy consumption of the commercial air transportation system. Volume 1: Technical analysis

    Science.gov (United States)

    Kraus, E. F.

    1976-01-01

    The effectiveness and associated costs of operational and technical options for reduced fuel consumption by Douglas aircraft in the domestic airline fleet are assessed. Areas explored include alternative procedures for airline and flight operations, advanced and state of the art technology, modification and derivative configurations, new near-term aircraft, turboprop configuration studies, and optimum aircraft geometry. Data for each aircraft studied is presented in tables and graphs.

  8. Manufacturing consumption of energy 1991

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-01

    This report provides estimates on energy consumption in the manufacturing sector of the US economy. These estimates are based on data from the 1991 Manufacturing Energy Consumption Survey (MECS). This survey--administered by the Energy End Use and Integrated Statistics Division, Office of Energy Markets and End Use, Energy Information Administration (EIA)--is the most comprehensive source of national-level data on energy-related information for the manufacturing industries.

  9. Green supply chain management using the queuing theory to handle congestion and reduce energy consumption and emissions from supply chain transportation fleet

    Directory of Open Access Journals (Sweden)

    Arvin Aziziankohan

    2017-05-01

    Full Text Available Purpose: Nowadays, governments and people pay more attention to use green products due to environmental pollution, irreplaceable energy and shortage of resources. Green products are resulted from the application of green supply chain management strategies to the organizations' performance strategies, so that we can reduce environmental pollutants and wastes and take a step towards saving energy with limited resources. Methodology:  In this paper, the effect of reducing energy consumption in green supply chain is examined by using queuing theory and transportation models. Data was generated and solved by a commercial optimization epackage. Findings:  The findings indicate that suitable assignment of existing transportation fleet with specified capacity, and using queueing theory in a closed-loop network to reduce the queue length and handle congestion, can cause a reduction in energy consumption by optimizing transportation and waiting times in a green supply chain. Originality/value: Adopting investment strategy in improving the environmental performance of the supply chain, will yield in many advantages and benefits. This article investigates the effect of queuing theory on reducing waiting time, optimizing energy consumption in green supply chain, and consequently decreasing pollution.

  10. Estimating Reduced Consumption for Dynamic Demand Response

    Energy Technology Data Exchange (ETDEWEB)

    Chelmis, Charalampos [Univ. of Southern California, Los Angeles, CA (United States); Aman, Saima [Univ. of Southern California, Los Angeles, CA (United States); Saeed, Muhammad Rizwan [Univ. of Southern California, Los Angeles, CA (United States); Frincu, Marc [Univ. of Southern California, Los Angeles, CA (United States); Prasanna, Viktor K. [Univ. of Southern California, Los Angeles, CA (United States)

    2015-01-30

    Growing demand is straining our existing electricity generation facilities and requires active participation of the utility and the consumers to achieve energy sustainability. One of the most effective and widely used ways to achieve this goal in the smart grid is demand response (DR), whereby consumers reduce their electricity consumption in response to a request sent from the utility whenever it anticipates a peak in demand. To successfully plan and implement demand response, the utility requires reliable estimate of reduced consumption during DR. This also helps in optimal selection of consumers and curtailment strategies during DR. While much work has been done on predicting normal consumption, reduced consumption prediction is an open problem that is under-studied. In this paper, we introduce and formalize the problem of reduced consumption prediction, and discuss the challenges associated with it. We also describe computational methods that use historical DR data as well as pre-DR conditions to make such predictions. Our experiments are conducted in the real-world setting of a university campus microgrid, and our preliminary results set the foundation for more detailed modeling.

  11. A New Method for Low Cost Production of Titanium Alloys for Reducing Energy Consumption of Mechanical Systems

    Energy Technology Data Exchange (ETDEWEB)

    Fang, Z. Zak [Univ. of Utah, Salt Lake City, UT (United States); Chandran, Ravi [Univ. of Utah, Salt Lake City, UT (United States); Koopman, Mark [Univ. of Utah, Salt Lake City, UT (United States)

    2016-02-29

    This project investigated an innovative manufacturing process intended to minimize the cost of production of titanium materials and components, and increase the adoption of Ti components for energy consuming applications, such as automobiles. A key innovation of the proposed manufacturing approach is a novel Ti powder sintering technology for making titanium materials with ultrafine grain microstructure in the as-sintered state with minimum, or an absence, of post-sintering processes. The new sintering technology is termed Hydrogen Sintering and Phase Transformations (HSPT), and constitutes a promising manufacturing technology that can be used to produce titanium (Ti) materials and components in a near-net-shape form, thus also minimizing machining costs. Our objective was to meet, or possibly surpass, the mechanical property levels for ASTM B348 Grade 5 for wrought Ti-6Al-4V. Although specific applications call for varying mechanical property requirements, ASTM B348 was created for the demanding applications of the aerospace industry, and is the established standard for Ti-6Al-4V. While the primary goal was to meet, or exceed this standard, the team also had the goal of demonstrating this could be done at a significantly lower cost of production. Interim goals of the project were to fully develop this novel sintering process, and provide sufficient baseline testing to make the method practical and attractive to industry. By optimizing the process parameters for the sintering of titanium hydride (TiH2) powders in a hydrogen atmosphere and controlling the phase transformations during and after sintering, the HSPT process was expected to reduce the energy consumption, and thus cost, of making Ti alloys and fabricating Ti components. The process was designed such that no high temperature melting is required for producing Ti alloys; little or no post-sintering processing is needed for producing desired microstructures (and therefore enhanced mechanical

  12. Switching off and exchanging of electricity guzzlers. The automotive and suppliers industrie reduce the consumption of energy and materials by means of smart conservation technologies; Stromfresser abschalten und auswechseln. Mit cleveren Spartechniken reduziert die Automobil- und Zulieferindustrie Energie- und Materialverbraeuche

    Energy Technology Data Exchange (ETDEWEB)

    Schroeter, Stefan

    2013-05-21

    New manufacturing methods and manufacturing techniques can reduce the energy consumption and material consumption in the automotive industry and its suppliers clearly. An optimization of established manufacturing processes may be useful. However, the biggest conservations are possible if the production process is completely rethought.

  13. Using passive cooling strategies to improve thermal performance and reduce energy consumption of residential buildings in U.A.E. buildings

    Directory of Open Access Journals (Sweden)

    Hanan M. Taleb

    2014-06-01

    Full Text Available Passive design responds to local climate and site conditions in order to maximise the comfort and health of building users while minimising energy use. The key to designing a passive building is to take best advantage of the local climate. Passive cooling refers to any technologies or design features adopted to reduce the temperature of buildings without the need for power consumption. Consequently, the aim of this study is to test the usefulness of applying selected passive cooling strategies to improve thermal performance and to reduce energy consumption of residential buildings in hot arid climate settings, namely Dubai, United Arab Emirates. One case building was selected and eight passive cooling strategies were applied. Energy simulation software – namely IES – was used to assess the performance of the building. Solar shading performance was also assessed using Sun Cast Analysis, as a part of the IES software. Energy reduction was achieved due to both the harnessing of natural ventilation and the minimising of heat gain in line with applying good shading devices alongside the use of double glazing. Additionally, green roofing proved its potential by acting as an effective roof insulation. The study revealed several significant findings including that the total annual energy consumption of a residential building in Dubai may be reduced by up to 23.6% when a building uses passive cooling strategies.

  14. Identifying perceived barriers and benefits to reducing energy consumption in an affordable housing complex using the Community-Based Social Marketing model

    Science.gov (United States)

    Reaves, Daniel

    Energy production and consumption has a negative impact on both environmental and human health. Energy consumption can be directly impacted by human behavior, especially in the residential sector. As a result, this sector has been studied significantly; however, energy reducing behavior change research focusing on the affordable housing sector has not been studied thoroughly to date. This study seeks to implement the first two phases of the Community Based Social Marketing (CBSM) framework in an affordable housing setting. The goals were to identify the optimal behaviors for energy reduction based on phase one survey results and to identify the perceived benefits and barriers associated with those behaviors. Additionally, this study identified nuances in the CBSM process that researchers should take into consideration when implementing CBSM in an affordable housing environment.

  15. 低温甲醇洗工艺节能降耗浅析%Discussion on Energy Saving and Consumption Reducing in the Rectisol Process

    Institute of Scientific and Technical Information of China (English)

    陈玉民; 王亚敏

    2014-01-01

    阐述影响低温甲醇洗系统甲醇、电、蒸汽、低压氮气、脱盐水消耗的因素,通过改进设备及优化工艺,达到节能降耗的目的。%Describe the factors which affecting consumption of methanol ,electricity ,steam ,low ‐pressure nitrogen ,desalinated water in the rectisol unit . After improving the equipment and optimizing the process ,the purpose of saving energy and reducing consumption is achieved .

  16. An integrated AMBBR and IFAS-SBR process for municipal wastewater treatment towards enhanced energy recovery, reduced energy consumption and sludge production.

    Science.gov (United States)

    Gu, Jun; Xu, Guangjing; Liu, Yu

    2017-03-01

    The conventional activated sludge (CAS) process has been widely employed for wastewater treatment for more than one hundred years. Recently, more and more concerns have been raised on the CAS process due to its high energy consumption and production of huge amount of waste activated sludge, which are inevitably linked to the issue of environmental sustainability and global climate change. Facing to such emerging and challenging situation, this study reported a novel A-B process in which an anaerobic moving bed biofilm reactor (AMBBR) served a lead A-stage for COD capture towards biogas production and an integrated fixed-biofilm and activated sludge sequencing batch reactor (IFAS-SBR) was employed as B-stage for biological nitrogen removal. Results showed that about 85% of wastewater COD was removed in the steady-state AMBBR with a total energy production rate of 0.28 kWh/m(3) wastewater treated, while 85% of N-removal was achieved when the stable nitrite shunt was established in the IFAS-SBR. Moreover, 90% of dissolved methane in the AMBBR effluent could be removed by the proposed flash chamber at the lower energy demand of 0.12 kWh/m(3) which could be offset by the potential energy harvested from produced methane. Compared to the CAS process, the production of waste sludge was reduced by about 75% in the proposed A-B process due to the efficient COD capture at the A-stage, leading to significant energy savings from aeration for COD oxidation and post-treatment of waste sludge at the B-stage. Consequently, this study offers in-depth insights into A-B process which should be considered as an ideal candidate for achieving the energy-neutral or even energy positive operation of a municipal wastewater treatment. Given the complex situation in A-B process, future study is needed to look into the system optimization towards the operational synergy between A- and B-stage in terms of energy recovery and nitrogen removal.

  17. Method for Cost-Benefit Analysis of Improved Indoor Climate Conditions and Reduced Energy Consumption in Office Buildings

    Directory of Open Access Journals (Sweden)

    Viktoras Dorosevas

    2013-09-01

    Full Text Available Indoor climate affects health and productivity of the occupants in office buildings, yet in many buildings of this type indoor climate conditions are not well-controlled due to insufficient heating or cooling capacity, high swings of external or internal heat loads, improper control or operation of heating, ventilation and air conditioning (HVAC equipment, etc. However, maintenance of good indoor environmental conditions in buildings requires increased investments and possible higher energy consumption. This paper focuses on the relation between investment costs for retrofitting HVAC equipment as well as decreased energy use and improved performance of occupants in office buildings. The cost-benefit analysis implementation algorithm is presented in this paper, including energy survey of the building, estimation of occupants dissatisfied by key indoor climate indicators using questionnaire survey and measurements. Technique for Order Preference by Similarity to Ideal Solution (TOPSIS analysis is used in the proposed method for data processing. A case study of an office building is presented in order to introduce an application example of the proposed method. Results of the study verify the applicability of the proposed algorithm and TOPSIS analysis as a practical tool for office building surveys in order to maximize productivity by means of cost efficient technical building retrofitting solutions.

  18. Monitoring Energy Consumption of Smartphones

    CERN Document Server

    Ding, Fangwei; Zhang, Wei; Zhao, Xuhai; Ma, Chengchuan

    2012-01-01

    With the rapid development of new and innovative applications for mobile devices like smartphones, advances in battery technology have not kept pace with rapidly growing energy demands. Thus energy consumption has become a more and more important issue of mobile devices. To meet the requirements of saving energy, it is critical to monitor and analyze the energy consumption of applications on smartphones. For this purpose, we develop a smart energy monitoring system called SEMO for smartphones using Android operating system. It can profile mobile applications with battery usage information, which is vital for both developers and users.

  19. Speed-controlled blowers reduce energy consumption in air conditioning systems; Drehzahlregulierte Luefter reduzieren Energieverbrauch einer Klimaanlage

    Energy Technology Data Exchange (ETDEWEB)

    Lutz, W.

    1996-08-01

    Speed-controlled blower engines are described. The engines have four major advantages: Energy conservation and reduction of the operating cost; Variable air volume flow for optimum adaptation to varying operating conditions; Speed control reduces wear; Lower noise at lower speed (higher comfort). (HW) [Deutsch] Es werden drehzahlregulierte Lueftermotoren vorgestellt. Diese Motoren haben 4 wesentliche Vorteile - Energieeinsparung, Senkung der Betriebskosten - variabler Luftvolumenstrom bringt eine optimale Anpassung an die jeweiligen Betriebsbedingungen - eine moegliche Drehzahlreduzierung senkt den Verschleiss - kleinere Drehzahlen machen die Anlage leiser (Komfortverbesserung). (HW)

  20. Interactive energy consumption visualization

    CSIR Research Space (South Africa)

    Lunga, D

    2014-11-01

    Full Text Available , Sweden; 2008 [4] Widen J, Wckelgard E. A high-resolution stochastic model of domestic activity patterns and electricity demand. Appl Energy, Volume 87, Pages 18801892, 2010. [5] Gyberg P, Palm J. Influencing households energy behavior: how is this done... and Social Change, Linkoping University, 581 83 Linkoping, Sweden [9] Ramik Sadana and John Stasko, Designing and Implementing an In- teractive Scatterplot Visualization for a Tablet Computer, International Working Conference on Advanced Visual Interfaces...

  1. Research on Heat Recovery Technology for Reducing the Energy Consumption of Dedicated Ventilation Systems: An Application to the Operating Model of a Laboratory

    Directory of Open Access Journals (Sweden)

    Lian Zhang

    2016-01-01

    Full Text Available In this research, the application of heat pipes in the air handler dedicated to decoupling dehumidification from cooling to reduce energy consumption was simulated and investigated by simulations and experimental studies. The cooling load profiles and heat pipes with effectiveness of 0.45 and 0.6, respectively, were evaluated in achieving the desired space conditions and calculated hour by hour. The results demonstrated that for all examined cases, a heat pipe heat exchanger (HPHX can be used to save over 80% of the energy during the hours of operation of air conditioning. The overall energy reduction rate was from 3.2% to 4.5% under air conditioning system conditions. It was found that the energy saving potential of a laboratory was higher than for other kinds of buildings. Therefore, the dedicated ventilation system combined with heat recovery technology can be efficiently applied to buildings, especially for laboratories in subtropical areas.

  2. Energy consumption, cultural background and payment structure

    NARCIS (Netherlands)

    Beunder, Alexander; Groot, Loek

    2015-01-01

    In order to reduce the ecological footprint of households and mitigate anthropogenic climate change, policy makers need to understand which incentives drive household energy consumption. Economists tend to rely solely on financial instruments, but these might have unintended consequences on energy c

  3. Energy sustainability: consumption, efficiency, and ...

    Science.gov (United States)

    One of the critical challenges in achieving sustainability is finding a way to meet the energy consumption needs of a growing population in the face of increasing economic prosperity and finite resources. According to ecological footprint computations, the global resource consumption began exceeding planetary supply in 1977 and by 2030, global energy demand, population, and gross domestic product are projected to greatly increase over 1977 levels. With the aim of finding sustainable energy solutions, we present a simple yet rigorous procedure for assessing and counterbalancing the relationship between energy demand, environmental impact, population, GDP, and energy efficiency. Our analyses indicated that infeasible increases in energy efficiency (over 100 %) would be required by 2030 to return to 1977 environmental impact levels and annual reductions (2 and 3 %) in energy demand resulted in physical, yet impractical requirements; hence, a combination of policy and technology approaches is needed to tackle this critical challenge. This work emphasizes the difficulty in moving toward energy sustainability and helps to frame possible solutions useful for policy and management. Based on projected energy consumption, environmental impact, human population, gross domestic product (GDP), and energy efficiency, for this study, we explore the increase in energy-use efficiency and the decrease in energy use intensity required to achieve sustainable environmental impact le

  4. Reducing Petroleum Consumption from Transportation

    OpenAIRE

    Knittel, Christopher R

    2012-01-01

    The United States consumes more petroleum-based liquid fuel per capita than any other OECD high-income country—30 percent more than the second-highest country (Canada) and 40 percent more than the third-highest (Luxembourg). The transportation sector accounts for 70 percent of U.S. oil consumption and 30 percent of U.S. greenhouse gas emissions. Taking the externalities associated with high U.S. gasoline consumption as largely given, I focus on understanding the policy tools that seek to redu...

  5. Greenhouse energy consumption

    Science.gov (United States)

    Eric van Steenis

    2009-01-01

    Depending on location and luck, natural gas rates have gone from less that CAN$ 3.00 to more than CAN$ 20.00/gigajoule (Gj). Natural gas rates are currently around CAN$ 13.00/Gj, although industry "analysts" predict an increase. A gigajoule is equivalent to the energy released by the combustion of approximately 30 L (8 gal) of gasoline. It is also equivalent...

  6. ANALYSIS OF TROLLEYBUS ENERGY CONSUMPTION

    Directory of Open Access Journals (Sweden)

    Ewa Siemionek

    2013-06-01

    Full Text Available Developing energy-saving solutions in vehicle construction and operation has become a priority in the automotive sector. For this reason, zero-emission and low-noise trolleybuses have started to play a significant role in urban public transportation. The paper discusses the methodology and results of energy consumption analysis for trolleybus travel on a determined route. For a given section of the route, energy recovery under braking was calculated.

  7. Manufacturing consumption of energy 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    This report provides estimates on energy consumption in the manufacturing sector of the U.S. economy based on data from the Manufacturing Energy Consumption Survey. The sample used in this report represented about 250,000 of the largest manufacturing establishments which account for approximately 98 percent of U.S. economic output from manufacturing, and an expected similar proportion of manufacturing energy use. The amount of energy use was collected for all operations of each establishment surveyed. Highlights of the report include profiles for the four major energy-consuming industries (petroleum refining, chemical, paper, and primary metal industries), and an analysis of the effects of changes in the natural gas and electricity markets on the manufacturing sector. Seven appendices are included to provide detailed background information. 10 figs., 51 tabs.

  8. Mobile operators have set ambitious targets – Is it possible to boost network capacity while reducing its energy consumption?

    DEFF Research Database (Denmark)

    Micallef, Gilbert; Mogensen, Preben; Scheck, Hans-Otto

    2012-01-01

    the possible savings by adopting an energy-efficient capacity evolution together with an equipment replacement and site upgrade strategy. Results show that network operators can get relatively close to their targets, with energy reductions of up to 40% noted. While this can be improved further through software...

  9. Analysis and Optimization of Building Energy Consumption

    Science.gov (United States)

    Chuah, Jun Wei

    Energy is one of the most important resources required by modern human society. In 2010, energy expenditures represented 10% of global gross domestic product (GDP). By 2035, global energy consumption is expected to increase by more than 50% from current levels. The increased pace of global energy consumption leads to significant environmental and socioeconomic issues: (i) carbon emissions, from the burning of fossil fuels for energy, contribute to global warming, and (ii) increased energy expenditures lead to reduced standard of living. Efficient use of energy, through energy conservation measures, is an important step toward mitigating these effects. Residential and commercial buildings represent a prime target for energy conservation, comprising 21% of global energy consumption and 40% of the total energy consumption in the United States. This thesis describes techniques for the analysis and optimization of building energy consumption. The thesis focuses on building retrofits and building energy simulation as key areas in building energy optimization and analysis. The thesis first discusses and evaluates building-level renewable energy generation as a solution toward building energy optimization. The thesis next describes a novel heating system, called localized heating. Under localized heating, building occupants are heated individually by directed radiant heaters, resulting in a considerably reduced heated space and significant heating energy savings. To support localized heating, a minimally-intrusive indoor occupant positioning system is described. The thesis then discusses occupant-level sensing (OLS) as the next frontier in building energy optimization. OLS captures the exact environmental conditions faced by each building occupant, using sensors that are carried by all building occupants. The information provided by OLS enables fine-grained optimization for unprecedented levels of energy efficiency and occupant comfort. The thesis also describes a retrofit

  10. Household vehicles energy consumption 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-08-01

    Household Vehicles Energy Consumption 1994 reports on the results of the 1994 Residential Transportation Energy Consumption Survey (RTECS). The RTECS is a national sample survey that has been conducted every 3 years since 1985. For the 1994 survey, more than 3,000 households that own or use some 6,000 vehicles provided information to describe vehicle stock, vehicle-miles traveled, energy end-use consumption, and energy expenditures for personal vehicles. The survey results represent the characteristics of the 84.9 million households that used or had access to vehicles in 1994 nationwide. (An additional 12 million households neither owned or had access to vehicles during the survey year.) To be included in then RTECS survey, vehicles must be either owned or used by household members on a regular basis for personal transportation, or owned by a company rather than a household, but kept at home, regularly available for the use of household members. Most vehicles included in the RTECS are classified as {open_quotes}light-duty vehicles{close_quotes} (weighing less than 8,500 pounds). However, the RTECS also includes a very small number of {open_quotes}other{close_quotes} vehicles, such as motor homes and larger trucks that are available for personal use.

  11. Reducing the energy consumption by means of contracting. Heating system of a brewery; Energieverbrauch per Contracting reduzieren. Heizungsanlage eines Brauhauses

    Energy Technology Data Exchange (ETDEWEB)

    Gilges, Roland [GC Waermedienste GmbH (German Contract), Neuss (Germany)

    2013-07-15

    The increasing scarcity of energy resources and the sharply increasing prices indicate a new significance on the energy efficiency, benefits and cost savings. The Frankenheim Bauhaus in Neuss (Federal Republic of Germany) is based on the technology of a cogeneration plant since the beginning of the year 2013. The contracting services provider GC Waermedienste GmbH (Neuss, Federal Republic of Germany) has accompanied the implementation of the energetic ground-up refurbishment. The system can be controlled by means of remote monitoring of all installed components.

  12. Measuring is winning. FlevOnice reduces energy consumption by 50%; Meten is winnen. FlevOnice halveert energiegebruik

    Energy Technology Data Exchange (ETDEWEB)

    Van der Stoel, H. [Sparkling Projects, Apeldoorn (Netherlands)

    2011-01-15

    FlevOnice is a 5 kilometers outdoor speed skating rink in Biddinghuizen, Netherlands. This article addresses what is needed to conduct good measurements aimed at maintaining the ice floor of FlevOnice and to save energy. [Dutch] FlevOnice is een vijf kilometer lange buiten gelegen ijsbaan in Biddinghuizen. In dit artikel wordt aandacht besteed aan wat nodig is om goede metingen uit te voeren waarmee de ijsvloer van FlevOnice kan worden onderhouden en waarmee energie kan worden bespaard.

  13. The use of a double heat pipe heat exchanger system for reducing energy consumption of treating ventilation air in an operating theatre. A full year energy consumption model simulation

    Energy Technology Data Exchange (ETDEWEB)

    Yau, Y.H. [Department of Mechanical Engineering, University of Malaya, 50603 Kuala Lumpur (Malaysia)

    2008-07-01

    In two earlier papers [Y.H. Yau, Application of a heat pipe heat exchanger to dehumidification enhancement in tropical HVAC systems - a baseline performance characteristics study, International Journal of Thermal Sciences 46 (2) (2007) 164-171; ], two series of experiments were conducted under controlled conditions to establish the baseline performance characteristics of the heat pipe heat exchanger (HPHX). In the present paper, a complete empirical transient systems simulation program model is assembled to estimate the air states as well as the entire typical meteorological year energy consumption of an operating theatre located in Kuala Lumpur, Malaysia. The current heating, ventilating and air conditioning (HVAC) systems for the operating theatre are found to be inherently energy-inefficient and can be further improved with a double heat pipe heat exchanger system. The impact on actual energy consumption of a custom-built Trane Air Handler Unit 0704 2-2MB is simulated with two 8-row heat pipe heat exchanger installed in the heating, ventilating and air conditioning system compared to the existing without HPHX HVAC system. Based on this investigation, the application of a double heat pipe heat exchanger system (Plant E) in the conventional Air Handler Unit operating in a tropical climate is strongly recommended as an efficient mean for humidity control and energy savings to maintain acceptable room conditions per American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) requirements [ASHRAE, ASHRAE Handbook HVAC Applications SI Edition, ASHRAE, Atlanta, GA, USA, 1995]. (author)

  14. A First-Order Study of Reduced Energy Consumption via Increased Thermal Capacitance with Thermal Storage Management in a Micro-Building

    Directory of Open Access Journals (Sweden)

    Mary B. Wilson

    2015-10-01

    Full Text Available This study uses a first-order approximation of a micro-building to investigate the major factors determining how increased thermal capacitance (ITC with thermal storage management (TSM can reduce energy consumption in locations with relatively mild weather conditions such as the southeastern part of the United States of America. In this study, ITC is achieved through water circulation between a large storage tank and pipes embedded within the building envelope. Although ITC results in a larger dominant time constant for the thermal response of a building, an adaptive allocation and control of the added capacitance through TSM significantly improves the benefits of the extra capacitance. This paper compares two first-order models for a micro-building: a reference case model with a single lumped thermal capacitance associated with the building, and another model, with the building’s capacitance plus the capacitance of the water system. Results showed that the ITC/TSM system reduced the cost of conditioning the building by reducing the operating time of both the cooling and the heating systems. May through September, the air conditioning operating time was reduced by an average of 70%, and October through April, the operation of the heating system was reduced by an average of 25%.

  15. A Study of Saving Electrical Energy in the State of Kuwait by Reducing Power Consumption in the Street Lighting Networks

    Directory of Open Access Journals (Sweden)

    Adnan B. Alharees

    2016-01-01

    Full Text Available This paper intends to briefly demonstrate the saving of electrical energy in the street lighting networks in the State of Kuwait. This has been done through various steps and phases, such as changing the mercury lamps with high pressure sodium lamps, installing of Program Logic Controller (PLC system in some roads, and finally applying the reduction power system using Street Lights Dual Power Dimming type in the street lighting networks. Ministry of Electricity and Water (MEW is responsible of the street lighting networks; therefore we will introduce some data brought from MEW to support our study as a case study.

  16. Energy Consumption and Energy Efficiency Trends in the EU-28 (2000-2014)

    OpenAIRE

    BERTOLDI PAOLO; LOPEZ LORENTE JAVIER; LABANCA NICOLA

    2016-01-01

    This report aims at showing the present status of energy consumption in the EU-28, in the four main energy consuming sectors: residential, tertiary, transport and industry. During the last years, there have been efforts by the European Union to cut down on energy consumption and improve energy efficiency. From 2000 to 2014, there have been various initiatives that aim at reducing final energy consumption. Therefore, the report demonstrates the energy consumption progress from 2000 to 2014 in ...

  17. Energy management: analysis of reducing energy consumption by sectors of the A.W. Faber-Castell S.A. company; Gerenciamento energetico: analise de reducao do consumo de energia eletrica de setores da empresa A.W. Faber-Castell S.A.

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Jesue Ferraz da [Faculdades Integradas de Sao Carlos (FADISC), SP (Brazil); Branco, Fabio Jose Ceron [Universidade de Sao Paulo (EESC/USP), Sao Carlos, SP (Brazil). Escola de Engenharia

    2009-07-01

    The energy consumption in the sectors that require a lot of input from the company A.W. Faber-Castell S.A. after the implementation of the program to reduce energy consumption by the Internal Committee for Energy Conservation was studied. This program aimed to reduce by 0.5% of electric power in the company.

  18. Nuclear energy consumption and economic growth in nine developed countries

    Energy Technology Data Exchange (ETDEWEB)

    Wolde-Rufael, Yemane [135 Carnwath Road, London SW6 3HR (United Kingdom); Menyah, Kojo [London Metropolitan Business School, London Metropolitan University, 84 Moorgate, London EC2M 6SQ (United Kingdom)

    2010-05-15

    This article attempts to test the causal relationship between nuclear energy consumption and real GDP for nine developed countries for the period 1971-2005 by including capital and labour as additional variables. Using a modified version of the Granger causality test developed by Toda and Yamamoto (1995), we found a unidirectional causality running from nuclear energy consumption to economic growth in Japan, Netherlands and Switzerland; the opposite uni-directional causality running from economic growth to nuclear energy consumption in Canada and Sweden; and a bi-directional causality running between economic growth and nuclear energy consumption in France, Spain, the United Kingdom and the United States. In Spain, the United Kingdom and the USA, increases in nuclear energy consumption caused increases in economic growth implying that conservation measures taken that reduce nuclear energy consumption may negatively affect economic growth. In France, Japan, Netherlands and Switzerland increases in nuclear energy consumption caused decreases in economic growth, suggesting that energy conservation measure taken that reduce nuclear energy consumption may help to mitigate the adverse effects of nuclear energy consumption on economic growth. In Canada and Sweden energy conservation measures affecting nuclear energy consumption may not harm economic growth. (author)

  19. Building technology and user behaviour reduce energy consumption; Wegweisende Gebaeudetechnik an der Kantonsschule Limmattal: Teil 1. Gebaeudetechnik und Benutzerverhalten senken Energieverbrauch

    Energy Technology Data Exchange (ETDEWEB)

    Schwaninger, E.

    2008-07-01

    This first article of a series of two describes how clever building services technology and energy-conscious user behaviour has assured very low energy consumption figures for heating and hot-water preparation in a school complex in Urdorf, Switzerland. The efforts made by the school's janitor in this area are discussed. The heating installations, which feature two differently-sized, gas-fired boilers and their operation are described. Temperature levels in the classrooms, gymnasium and offices are discussed. Monitoring of the situation in the building (open windows, sunshading etc.) is quoted as a way of keeping energy consumption at a low level.

  20. 降低冷冻系统能耗的技术改进%Technological improvement of reducing refrigeration system energy consumption

    Institute of Scientific and Technical Information of China (English)

    刘飞; 张本峰; 顾朝晖

    2014-01-01

    The paper briefly analyzes synthesis ammonia refrigeration system in summer producing. On the one hand, because of high temperature of synthesis circulating water,the temperature of water condenser outlet synthesis gas is high which need more cooling energy of ammonia condenser;on the other hand,liquid ammonia from refrigeration system to ammonia condenser is influenced by atmospheric temperature,the temperature rises which causes providing less cooling energy of unit liquid ammonia. Both causes result in ammonia condenser need more cooling energy,increases load of refrigerating machine which causes power consumption of refrigerating machine. It also introduces countermeasure to the problems,adding to a heat exchanger between refrigerating machine and liquid ammonia groove in order to reduce temperature of liquid ammonia,increase cooling energy of unit liquid ammonia,in the end achieves reducing power consumption of refrigerating machine.%简要分析合成氨冷冻系统在夏季生产时,一方面由于合成循环水温度居高不下,使出水冷器的合成气温度偏高,需要氨冷凝器提供更多的冷量;另一方面,从冷冻系统进入合成氨冷凝器的液氨受大气温度的影响,温度上升,使单位液氨提供冷量减少。两方面原因导致合成氨系统所需冷量增加,需加大冰机负荷,造成冰机耗电量上升。并介绍为解决这一问题,在冰机出口进液氨槽前增加一台换热器进一步冷却降低液氨温度,提高单位液氨的供冷量,从而降低冰机耗电量的技改措施。

  1. State energy data report 1992: Consumption estimates

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-01

    This is a report of energy consumption by state for the years 1960 to 1992. The report contains summaries of energy consumption for the US and by state, consumption by source, comparisons to other energy use reports, consumption by energy use sector, and describes the estimation methodologies used in the preparation of the report. Some years are not listed specifically although they are included in the summary of data.

  2. REDUCING GREENHOUSE EMISSIONS AND FUEL CONSUMPTION

    Directory of Open Access Journals (Sweden)

    Susan A. SHAHEEN, Ph.D.

    2007-01-01

    Fortunately, transportation technologies and strategies are emerging that can help to meet the climate challenge. These include automotive and fuel technologies, intelligent transportation systems (ITS, and mobility management strategies that can reduce the demand for private vehicles. While the climate change benefits of innovative engine and vehicle technologies are relatively well understood, there are fewer studies available on the energy and emission impacts of ITS and mobility management strategies. In the future, ITS and mobility management will likely play a greater role in reducing fuel consumption. Studies are often based on simulation models, scenario analysis, and limited deployment experience. Thus, more research is needed to quantify potential impacts. Of the nine ITS technologies examined, traffic signal control, electronic toll collection, bus rapid transit, and traveler information have been deployed more widely and demonstrated positive impacts (but often on a limited basis. Mobility management approaches that have established the greatest CO2 reduction potential, to date, include road pricing policies (congestion and cordon and carsharing (short-term auto access. Other approaches have also indicated CO2 reduction potential including: low-speed modes, integrated regional smart cards, park-and-ride facilities, parking cash out, smart growth, telecommuting, and carpooling.

  3. Improved energy efficiency by means of reduced oil consumption for an ammonia refrigeration system; Verbeterde energie-efficiency door lager olieverbruik bij ammoniakkoeling

    Energy Technology Data Exchange (ETDEWEB)

    Lobregt, S. [TNO Milieu, Energie en Procesinnovatie TNO-MEP, Apeldoorn (Netherlands)

    2002-12-01

    F and F Europe, located in Kerkrade, the Netherlands, produces frozen mushrooms in a process involving washing, cutting, blanching (optional), freezing and packing. A central cooling unit produces the necessary cold, with ammonia as a refrigerant. Ammonia refrigeration systems operate more efficiently when lubricating oil is removed from the refrigerant. Due to relatively high ammonia temperatures some of the oil applied as lubricant and sealant evaporates and is transported into the cooling system by the ammonia flow. This oil contamination causes a film to settle inside the evaporators and condensers, which decreases the heat transfer and causes a fall of the suction pressure, a rise of the condensation temperature and an increase in operation time and electric energy consumption of the cornpressors. Previously, the oil was removed in traditional separators. However, due to the high temperature of the ammonia leaving the compressor (over 100C in the piston compressor) the existing separators are unable to prevent evaporated oil and small oil droplets entering the system. The company decided to introduce a hydrotreated oil and a high-efficiency oil remover. This recently developed type of oil separator has been installed at the discharge sides of the piston compressor. These measures caused the oil concentration in the gas leaving the compressor to drop to less than 3 ppm. Not only does this lead to substantial energy savings, but also to a significant reduction of the oil consumption and a diminished need for maintenance. Also safety conditions during oil change are improved while the oil contains less ammonia solved. The oil reclaimed from the ammonia flow may be fed back to the system. [Dutch] F en F Europe te Kerkrade beschikt over een ammoniak-koelsysteem voor het invriezen van champignondelen. Het bedrijf breidt de koeicapaciteit uit met een tweetrapszuigercompressor en ziet hierin een uitgelezen kans om het olieverbruik van het gehele koelsysteem te

  4. Household energy consumption and expenditures 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-05

    This presents information about household end-use consumption of energy and expenditures for that energy. These data were collected in the 1993 Residential Energy Consumption Survey; more than 7,000 households were surveyed for information on their housing units, energy consumption and expenditures, stock of energy-consuming appliances, and energy-related behavior. The information represents all households nationwide (97 million). Key findings: National residential energy consumption was 10.0 quadrillion Btu in 1993, a 9% increase over 1990. Weather has a significant effect on energy consumption. Consumption of electricity for appliances is increasing. Houses that use electricity for space heating have lower overall energy expenditures than households that heat with other fuels. RECS collected data for the 4 most populous states: CA, FL, NY, TX.

  5. Incentives to reduce groundwater consumption in Yemen

    NARCIS (Netherlands)

    Hellegers, P.J.G.J.; Perry, C.J.; Al-Aulaqi, N.

    2011-01-01

    In this paper options for changing the incentive structure to reduce unsustainable groundwater consumption in Yemen are evaluated. Special attention is paid to incentives that decrease the profitability of irrigation water use and subsidies on improved irrigation technology. Although the literature

  6. Household vehicles energy consumption 1991

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-09

    The purpose of this report is to provide information on the use of energy in residential vehicles in the 50 States and the District of Columbia. Included are data about: the number and type of vehicles in the residential sector, the characteristics of those vehicles, the total annual Vehicle Miles Traveled (VMT), the per household and per vehicle VMT, the vehicle fuel consumption and expenditures, and vehicle fuel efficiencies. The data for this report are based on the household telephone interviews from the 1991 RTECS, conducted during 1991 and early 1992. The 1991 RTECS represents 94.6 million households, of which 84.6 million own or have access to 151.2 million household motor vehicles in the 50 States and the District of Columbia.

  7. Urban transport energy consumption: Belgrade case study

    Directory of Open Access Journals (Sweden)

    Jovanović Miomir M.

    2015-01-01

    Full Text Available More than half of the global population now lives in towns and cities. At the same time, transport has become the highest single energy-consuming human activity. Hence, one of the major topics today is the reduction of urban transport demand and of energy consumption in cities. In this article we focused on the whole package of instruments that can reduce energy consumption and transport demand in Belgrade, a city that is currently at a major crossroad. Belgrade can prevent a dramatic increase in energy consumption and CO2 emissions (and mitigate the negative local environmental effects of traffic congestion, traffic accidents and air pollution, only if it: 1 implements a more decisive strategy to limit private vehicles use while its level of car passenger km (PKT is still relatively low; 2 does not try to solve its transport problems only by trying to build urban road infrastructure (bridges and ring roads; and 3 if it continues to provide priority movement for buses (a dominant form of public transport, while 4 at the same time developing urban rail systems (metro or LRT with exclusive tracks, immune to the traffic congestion on urban streets. [Projekat Ministarstva nauke Republike Srbije, br. 37010

  8. Reduced energy consumption. Enormous energy conservation by means of efficient vapour-condensate-systems; Reduzierter Energieverbrauch. Erhebliche Energieeinsparung durch effiziente Dampf-Kondensat-Systeme

    Energy Technology Data Exchange (ETDEWEB)

    Baelz, Uwe; Kilpper-Baelz, Renate

    2012-09-15

    The escape of unexploited steam in the industry and in the living area is an avoidable dissipation of energy. Modern vapour-water transmission stations are closed, space-saving systems. With this, the otherwise escaping energy can be converted into heat energy, for example.

  9. Analysis of Energy Consumption in Beijing

    Institute of Scientific and Technical Information of China (English)

    Li Zhou; Tong Lizhi; Sun Juan

    2010-01-01

    @@ 1. Present characteristics of Beijing's energy consumption 1.1 The slowing of the growth in total energy consumption In 2008, Beijing's total energy consumption reached 63.437 million tons of standard coal, an increase of 586.6 thousand tons compared with the previous year. The increasing range was 1%, dropping 5.45% compared with the previous year, as shown in Figure 1. Since 2005, the annual growth rate of the total energy consumption showed a decreasing trend each year. The city's GDP over the same period reached RMB 1.048803 trillion, increasing 9%. The energy consumption rate fell clearly. In 2008, the energy consumption rate was 0.61 tons of standard coal per 10 thousand yuan GDP, a decline of 7.4%. It continued the favorable condition of 2007's energy saving.

  10. Intelligent Cooperative MAC Protocol for Balancing Energy Consumption

    Science.gov (United States)

    Wu, S.; Liu, K.; Huang, B.; Liu, F.

    To extend the lifetime of wireless sensor networks, we proposed an intelligent balanced energy consumption cooperative MAC protocol (IBEC-CMAC) based on the multi-node cooperative transmission model. The protocol has priority to access high-quality channels for reducing energy consumption of each transmission. It can also balance the energy consumption among cooperative nodes by using high residual energy nodes instead of excessively consuming some node's energy. Simulation results show that IBEC-CMAC can obtain longer network lifetime and higher energy utilization than direct transmission.

  11. State energy data report 1993: Consumption estimates

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sector. The estimates are developed in the State Energy Data System (SEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining SEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. SEDS exists for two principal reasons: (1) to provide State energy consumption estimates to Members of Congress, Federal and State agencies, and the general public; and (2) to provide the historical series necessary for EIA`s energy models.

  12. State Energy Data Report, 1991: Consumption estimates

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sector. The estimates are developed in the State Energy Data System (SEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining SEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. SEDS exists for two principal reasons: (1) to provide State energy consumption estimates to the Government, policy makers, and the public; and (2) to provide the historical series necessary for EIA`s energy models.

  13. Simulation Tool For Energy Consumption and Production

    DEFF Research Database (Denmark)

    Nysteen, Michael; Mynderup, Henrik; Poulsen, Bjarne

    2013-01-01

    the energy consumption in smart homes. This paper presents a prototype simulation tool that allows graphical modeling of a home. Based on the modeled homes the user is able to simulate the energy consumptions and compare scenarios. The simulations are based on dynamic weather and energy price data as well...

  14. Fundamental principles of energy consumption for gene expression

    Science.gov (United States)

    Huang, Lifang; Yuan, Zhanjiang; Yu, Jianshe; Zhou, Tianshou

    2015-12-01

    How energy is consumed in gene expression is largely unknown mainly due to complexity of non-equilibrium mechanisms affecting expression levels. Here, by analyzing a representative gene model that considers complexity of gene expression, we show that negative feedback increases energy consumption but positive feedback has an opposite effect; promoter leakage always reduces energy consumption; generating more bursts needs to consume more energy; and the speed of promoter switching is at the cost of energy consumption. We also find that the relationship between energy consumption and expression noise is multi-mode, depending on both the type of feedback and the speed of promoter switching. Altogether, these results constitute fundamental principles of energy consumption for gene expression, which lay a foundation for designing biologically reasonable gene modules. In addition, we discuss possible biological implications of these principles by combining experimental facts.

  15. Widening the scope? How intermediary actors can shape energy consumption

    DEFF Research Database (Denmark)

    Maneschi, Davide

    2013-01-01

    This paper deals with energy consumption in the residential sector and with the implementation of measures to reduce it. While most research dealing with energy consumption has targeted factors and drivers at the individual user level, more recent works have highlighted collective aspects...... of (energy) consumption, both to explain the resilience of consumption patterns and to identify leverage points for the reduction of energy use. One understudied aspect of this discussion is the way “intermediary” actors – those actors who are neither policy makers, nor users, nor energy providers...... – influence energy consumption. This paper presents a review of the literature on intermediaries, providing an overview of their roles and contextualizing their functions in energy efficiency improvements. The review shows how the concept of intermediaries has been used in research dealing with innovation...

  16. State energy data report 1994: Consumption estimates

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    This document provides annual time series estimates of State-level energy consumption by major economic sector. The estimates are developed in the State Energy Data System (SEDS), operated by EIA. SEDS provides State energy consumption estimates to members of Congress, Federal and State agencies, and the general public, and provides the historical series needed for EIA`s energy models. Division is made for each energy type and end use sector. Nuclear electric power is included.

  17. State energy data report 1996: Consumption estimates

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-01

    The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sectors. The estimates are developed in the Combined State Energy Data System (CSEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining CSEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. CSEDS exists for two principal reasons: (1) to provide State energy consumption estimates to Members of Congress, Federal and State agencies, and the general public and (2) to provide the historical series necessary for EIA`s energy models. To the degree possible, energy consumption has been assigned to five sectors: residential, commercial, industrial, transportation, and electric utility sectors. Fuels covered are coal, natural gas, petroleum, nuclear electric power, hydroelectric power, biomass, and other, defined as electric power generated from geothermal, wind, photovoltaic, and solar thermal energy. 322 tabs.

  18. Energy Optimization on the Battlefield: How Integrating Energy Efficient Technologies at the Tactical Level Can Reduce Fuel Consumption and Lessen the Burden of Fuel Logistics

    Science.gov (United States)

    2014-06-13

    Blanket Source: HDG Global , Base X-Press Shelters,” http://www.hdtglobal.com/products/ shelters/base- xpress / (accessed May 13, 2014...and the way ahead. It states as long as we are dependent on fossil fuels, we need to ensure the security and free flow of global energy resources by...of today’s defense mission. Challenges to future U.S. national security are increasingly global and complex, requiring a broad range of military

  19. Energy Consumption in Cloud Computing Data Centers

    Directory of Open Access Journals (Sweden)

    Uchechukwu Awada

    2014-06-01

    Full Text Available The implementation of cloud computing has attracted computing as a utility and enables penetrative applications from scientific, consumer and business domains. However, this implementation faces tremendous energy consumption, carbon dioxide emission and associated costs concerns. With energy consumption becoming key issue for the operation and maintenance of cloud datacenters, cloud computing providers are becoming profoundly concerned.  In this paper, we present formulations and solutions for Green Cloud Environments (GCE to minimize its environmental impact and energy consumption under new models by considering static and dynamic portions of cloud components. Our proposed methodology captures cloud computing data centers and presents a generic model for them. To implement this objective, an in-depth knowledge of energy consumption patterns in cloud environment is necessary. We investigate energy consumption patterns and show that by applying suitable optimization policies directed through our energy consumption models, it is possible to save 20% of energy consumption in cloud data centers. Our research results can be integrated into cloud computing systems to monitor energy consumption and support static and dynamic system level-optimization.

  20. Modeling and Optimization for Piercing Energy Consumption

    Institute of Scientific and Technical Information of China (English)

    XIAO Dong; PAN Xiao-li; YUAN Yong; MAO Zhi-zhong; WANG Fu-li

    2009-01-01

    Energy consumption is an important quality index in the production of seamless tubes. The complex factors affecting energy consumption make it difficult to build its mechanism model, and optimization is also very difficult, if not impossible. The piercing process was divided into three parts based on the production process, and an energy consumption prediction model was proposed based on the step mean value staged multiway partial least square meth-od. On the basis of the batch process prediction model, a genetic algorithm was adopted to calculate the optimum mean value of each process parameter and the minimum piercing energy consumption. Simulation proves that the op-timization method based on the energy consumption prediction model can obtain the optimum process parameters ef-fectively and also provide reliable evidences for practical production.

  1. Calculations of energy consumption in ventilation systems

    Energy Technology Data Exchange (ETDEWEB)

    Kreslins, Andris; Ramata, Anna [Riga Technical University (Latvia)], e-mail: kreslins@rbf.rtu.lv, email: Anna.Ramata@rtu.lv

    2011-07-01

    Energy cost is an important economic factor in the food industry production process. With the rising price of energy, a reduction in energy consumption would greatly impact production and the end product. The aim of this study was to develop a methodology for optimizing energy consumption. A comparison between a traditional ventilation system and a mechanical system was carried out; the necessary enthalpy for heating the air supply and thermal energy consumption were calculated and compared for both systems during the heating season, from October to April, using climatological data for Latvia. Results showed that energy savings of 46% to 87% can be achieved by applying the methodology in the design of industrial buildings; in addition, a well-designed ventilation system increases the workers' productivity. This study presented a methodology which can optimize energy consumption in the food industry sector.

  2. Residential Energy Consumption Survey: Quality Profile

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The Residential Energy Consumption Survey (RECS) is a periodic national survey that provides timely information about energy consumption and expenditures of U.S. households and about energy-related characteristics of housing units. The survey was first conducted in 1978 as the National Interim Energy Consumption Survey (NIECS), and the 1979 survey was called the Household Screener Survey. From 1980 through 1982 RECS was conducted annually. The next RECS was fielded in 1984, and since then, the survey has been undertaken at 3-year intervals. The most recent RECS was conducted in 1993.

  3. Estimates of US biomass energy consumption 1992

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-06

    This report is the seventh in a series of publications developed by the Energy Information Administration (EIA) to quantify the biomass-derived primary energy used by the US economy. It presents estimates of 1991 and 1992 consumption. The objective of this report is to provide updated estimates of biomass energy consumption for use by Congress, Federal and State agencies, biomass producers and end-use sectors, and the public at large.

  4. Energy Beverage Consumption Among Naval Aviation Candidates.

    Science.gov (United States)

    Sather, Thomas E; Delorey, Donald R

    2016-06-01

    Since the debut of energy beverages, the consumption of energy beverages has been immensely popular with young adults. Research regarding energy beverage consumption has included college students, European Union residents, and U.S. Army military personnel. However, energy beverage consumption among naval aviation candidates in the United States has yet to be examined. The purpose of this study was to assess energy beverage consumption patterns (frequency and volume) among naval aviation candidates, including attitudes and perceptions regarding the benefits and safety of energy beverage consumption. A 44-item survey was used to assess energy beverage consumption patterns of 302 students enrolled in the Aviation Preflight Indoctrination Course at Naval Air Station Pensacola, FL. Results indicated that 79% of participants (N = 239) reported consuming energy beverages within the last year. However, of those who reported consuming energy beverages within the last year, only 36% (N = 85) reported consuming energy beverages within the last 30 d. Additionally, 51% (N = 153) of participants reported no regular energy beverages consumption. The majority of participants consumed energy beverages for mental alertness (67%), mental endurance (37%), and physical endurance (12%). The most reported side effects among participants included increased mental alertness (67%), increased heart rate (53%), and restlessness (41%). Naval aviation candidates appear to use energy drinks as frequently as a college student population, but less frequently than expected for an active duty military population. The findings of this study indicate that naval aviation candidates rarely use energy beverages (less than once per month), but when consumed, they use it for fatigue management.

  5. Energy consumption projection of Nepal

    DEFF Research Database (Denmark)

    Parajuli, Ranjan; Østergaard, Poul Alberg; Dalgaard, Tommy

    2014-01-01

    differing from each other on the basis of growth rates of economic indicators: total GDP, GDP-agriculture, GDP-trade, GDP-industry, and other variables including growth in private consumptions, population, transport vehicles numbers, prices of fossil fuels etc. Scenarios are: Business as Usual (BAU), Medium...

  6. Optimal energy consumption analysis of natural gas pipeline.

    Science.gov (United States)

    Liu, Enbin; Li, Changjun; Yang, Yi

    2014-01-01

    There are many compressor stations along long-distance natural gas pipelines. Natural gas can be transported using different boot programs and import pressures, combined with temperature control parameters. Moreover, different transport methods have correspondingly different energy consumptions. At present, the operating parameters of many pipelines are determined empirically by dispatchers, resulting in high energy consumption. This practice does not abide by energy reduction policies. Therefore, based on a full understanding of the actual needs of pipeline companies, we introduce production unit consumption indicators to establish an objective function for achieving the goal of lowering energy consumption. By using a dynamic programming method for solving the model and preparing calculation software, we can ensure that the solution process is quick and efficient. Using established optimization methods, we analyzed the energy savings for the XQ gas pipeline. By optimizing the boot program, the import station pressure, and the temperature parameters, we achieved the optimal energy consumption. By comparison with the measured energy consumption, the pipeline now has the potential to reduce energy consumption by 11 to 16 percent.

  7. Energy Consumption in Wireless Sensor Networks

    Institute of Scientific and Technical Information of China (English)

    JIN Yan; WANG Ling; YANG Xiao-zong; WEN Dong-xin

    2007-01-01

    Wireless sensor networks (WSNs) can be used to collect surrounding data by multi-hop. As sensor networks have the constrained and not rechargeable energy resource, energy efficiency is an important design issue for its topology. In this paper, the energy consumption issue under the different topology is studied. We derive the exact mathematical expression of energy consumption for the fiat and clustering scheme, respectively. Then the energy consumptions of different schemes are compared. By the comparison, multi-level clustering scheme is more energy efficient in large scale networks. Simulation results demonstrate that our analysis is correct from the view of prolonging the large-scale network lifetime and achieving more power reductions.

  8. [Relationships between settlement morphology transition and residents commuting energy consumption].

    Science.gov (United States)

    Zhou, Jian; Xiao, Rong-Bo; Sun, Xiang

    2013-07-01

    Settlement morphology transition is triggered by rapid urbanization and urban expansion, but its relationships with residents commuting energy consumption remains ambiguous. It is of significance to understand the controlling mechanisms of sustainable public management policies on the energy consumption and greenhouse gases emission during the process of urban settlement morphology transition. Taking the Xiamen City of East China as a case, and by using the integrated land use and transportation modeling system TRANUS, a scenario analysis was made to study the effects of urban settlement morphology transition on the urban spatial distribution of population, jobs, and land use, and on the residents commuting energy consumption and greenhouse gasses emission under different scenarios. The results showed that under the Business As Usual (BAU) scenario, the energy consumption of the residents at the morning peak travel time was 54.35 tce, and the CO2 emission was 119.12 t. As compared with those under BAU scenario, both the energy consumption and the CO2 emission under the Transition of Settlement Morphology (TSM) scenario increased by 12%, and, with the implementation of the appropriate policies such as land use, transportation, and economy, the energy consumption and CO2 emission under the Transition of Settlement Morphology with Policies (TSMP) scenario reduced by 7%, indicating that urban public management policies could effectively control the growth of residents commuting energy consumption and greenhouse gases emission during the period of urban settlement morphology transition.

  9. Energy consumption and energy saving potentials in piglet production; Energieverbrauch und energetische Einsparpotenziale in der Ferkelerzeugung

    Energy Technology Data Exchange (ETDEWEB)

    Neiber, Josef; Neser, Stefan [Bayerische Landesanstalt fuer Landwirtschaft (LFL), Freising (DE). Inst. fuer Landtechnik und Tierhaltung (ILT)

    2010-07-01

    For agricultural farms, a considerable share of variable costs is due to the energy consumption for agricultural production processes. In particular, piglet production and nursery have a high thermal and electric energy demand. For the planning and the redevelopment of pig housing systems, a good knowledge of the energy demand of different consumers is of great importance. With this knowledge, it is possible to derive measures for improving energy efficiency and reducing energy consumption. (orig.)

  10. Uncertainty analysis of energy consumption in dwellings

    Energy Technology Data Exchange (ETDEWEB)

    Pettersen, Trine Dyrstad

    1997-12-31

    This thesis presents a comprehensive study of an energy estimation model that can be used to examine the uncertainty of predicted energy consumption in a dwelling. The variation and uncertainty of input parameters due to the outdoor climate, the building construction and the inhabitants are studied as a basis for further energy evaluations. The occurring variations of energy consumption in nominal similar dwellings are also investigated due to verification of the simulated energy consumption. The main topics are (1) a study of expected variations and uncertainties in both input parameters used in energy consumption calculations and the energy consumption in the dwelling, (2) the development and evaluation of a simplified energy calculation model that considers uncertainties due to the input parameters, (3) an evaluation of the influence of the uncertain parameters on the total variation so that the most important parameters can be identified, and (4) the recommendation of a simplified procedure for treating uncertainties or possible deviations from average conditions. 90 refs., 182 figs., 73 tabs.

  11. Energy consumption for shortcuts to adiabaticity

    Science.gov (United States)

    Torrontegui, E.; Lizuain, I.; González-Resines, S.; Tobalina, A.; Ruschhaupt, A.; Kosloff, R.; Muga, J. G.

    2017-08-01

    Shortcuts to adiabaticity let a system reach the results of a slow adiabatic process in a shorter time. We propose to quantify the "energy cost" of the shortcut by the energy consumption of the system enlarged by including the control device. A mechanical model where the dynamics of the system and control device can be explicitly described illustrates that a broad range of possible values for the consumption is possible, including zero (above the adiabatic energy increment) when friction is negligible and the energy given away as negative power is stored and reused by perfect regenerative braking.

  12. Energy consumption for different greenhouses' structures

    Directory of Open Access Journals (Sweden)

    Đević Milan

    2008-01-01

    Full Text Available In this paper influence of greenhouses' structure was estimated for four different double plastic covered greenhouses in winter lettuce production. Plastic coverings are introduced as mean of making this kind of plant production more efficient. Also, as a mean of lowering energy consumption, the tunnel structures are proposed. Four different double plastic covered greenhouses were used for energy analysis. Two tunnel types, 9 x 58m and 8 x 25m covered with double PE folia, and two gutter connected plastic covered greenhouses. One greenhouse is 2 x 7 m wide and 39 m long and the other 20 x 6.4 m wide and 42 m long. Results have shown the lowest energy consumption for gutter connected greenhouses. Energy out/in ratio was also higher in gutter connected greenhouse. Highest energy consumption was obtained in tunnel greenhouse 8 x 25m.

  13. Tweeting : Smart meters raise awareness of energy consumption in buildings

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2009-11-15

    The University of Mississippi (UM) will monitor, analyze and report on energy consumption in its campus buildings in real-time using SmartSynch Smart Meters. The technology uses smart meter data to help identify a detailed pattern of electricity usage with the objective of finding methods to alter behaviour to reduce electricity usage and carbon emissions. SmartSynch installed 16 Smart Meters on campus with additional deployments being planned. The technology will enable the university to monitor energy consumption, track building power performance over time, compare building energy usage, and review the impact of the weather on energy use while reducing its carbon footprint. Additionally, UM will use Facebook, Twitter and an RSS feed to provide regular public updates on its buildings' energy consumption based on SmartSynch Smart Meter data. Each building will have its own profile on the social networking sites. 1 ref., 1 fig.

  14. Energy Consumption of Die Casting Operations

    Energy Technology Data Exchange (ETDEWEB)

    Jerald Brevick; clark Mount-Campbell; Carroll Mobley

    2004-03-15

    Molten metal processing is inherently energy intensive and roughly 25% of the cost of die-cast products can be traced to some form of energy consumption [1]. The obvious major energy requirements are for melting and holding molten alloy in preparation for casting. The proper selection and maintenance of melting and holding equipment are clearly important factors in minimizing energy consumption in die-casting operations [2]. In addition to energy consumption, furnace selection also influences metal loss due to oxidation, metal quality, and maintenance requirements. Other important factors influencing energy consumption in a die-casting facility include geographic location, alloy(s) cast, starting form of alloy (solid or liquid), overall process flow, casting yield, scrap rate, cycle times, number of shifts per day, days of operation per month, type and size of die-casting form of alloy (solid or liquid), overall process flow, casting yield, scrap rate, cycle times, number of shifts per day, days of operation per month, type and size of die-casting machine, related equipment (robots, trim presses), and downstream processing (machining, plating, assembly, etc.). Each of these factors also may influence the casting quality and productivity of a die-casting enterprise. In a die-casting enterprise, decisions regarding these issues are made frequently and are based on a large number of factors. Therefore, it is not surprising that energy consumption can vary significantly from one die-casting enterprise to the next, and within a single enterprise as function of time.

  15. Flexible Energy Consumption in Smart House's

    DEFF Research Database (Denmark)

    Madsen, Per Printz

    2012-01-01

    the consumer have to use the energy when it is available. The main electrical energy consumer in a modern society is buildings and private homes. The amount of electrical energy used in this sector is about 70% of the total electricity consumption. Because of that buildings and private homes has to play...... an automatic and inteligente house control system that maximize the consumption exibility based on the energy users behavior with out aection the living comfort. This behavior is of course dierent from household to household, because of that it is nessasary include an adaptive behavior prediction system......The last couple of years more and more non-controllable energy sources, e.g. wind turbines, have been connected to the power grid. This has caused an inecient energy production and a huge variation in the energy prices. In the near future (10 to 15 years) the amount of non-controllable energy...

  16. Reducing the specific energy consumption of 1st-pass SWRO by application of high-flux membranes fed with high-pH, decarbonated seawater.

    Science.gov (United States)

    Ophek, Liron; Birnhack, Liat; Nir, Oded; Binshtein, Eitan; Lahav, Ori

    2015-11-15

    A new operational approach is presented, which has the potential to substantially cut down on the energy and cost demand associated with seawater reverse osmosis (SWRO) desalination, without changing the currently-installed infrastructure. The approach comprises acidification/decarbonation of the feed seawater followed by high-pH single RO pass using high-flux membranes. Since the limitation imposed by CaCO3(s) precipitation is overcome, the recovery ratio can be significantly increased. This work presents a new operational concept aimed at maximizing the benefits that can be obtained from new low-energy RO membranes available on the market. Results obtained from operating a pilot RO system revealed that following an acidification and decarbonation step, recovery ratio of 56% could be practically attained, along with effluent TDS and boron concentrations of 375 and 0.3 mg/l, respectively (feed water pH was adjusted to pH9.53 following the decarbonation step). The specific energy consumption (SEC) of this operation was calculated to be 5%-10% lower than the SEC typically associated with "conventional" SWRO operation. Two further scenarios were theoretically considered, under which the limiting operational parameter became Mg(OH)2(s) and BaSO4(s) precipitation. It was concluded that despite the fact that higher recovery ratios could be obtained, the high pressure required in these scenarios made them less appealing from both the SEC and cost standpoints. The normalized cost of the suggested approach was found to be ∼$0.07 ± 0.02/m(3) cheaper than the currently-practiced SWRO approach for obtaining product water characterized by TDS < 500 and B < 0.5 mg/l.

  17. Electrode contact configuration and energy consumption in spinal cord stimulation

    NARCIS (Netherlands)

    Vos, de Cecile C.; Hilgerink, Marjolein P.; Buschman, Hendrik P.J.; Holsheimer, Jan

    2009-01-01

    Objective: To test the hypothesis that in spinal cord stimulation, in contrast to an increase of the number of anodes which reduces energy consumption per pulse, an increase of the number of cathodes raises the energy per pulse. Methods: Patients with an Itrel 3 pulse generator and a Pisces Quad qu

  18. Efficiency in energy production and consumption

    Science.gov (United States)

    Kellogg, Ryan Mayer

    This dissertation deals with economic efficiency in the energy industry and consists of three parts. The first examines how joint experience between pairs of firms working together in oil and gas drilling improves productivity. Part two asks whether oil producers time their drilling optimally by taking real options effects into consideration. Finally, I investigate the efficiency with which energy is consumed, asking whether extending Daylight Saving Time (DST) reduces electricity use. The chapter "Learning by Drilling: Inter-Firm Learning and Relationship Persistence in the Texas Oilpatch" examines how oil production companies and the drilling rigs they hire improve drilling productivity by learning through joint experience. I find that the joint productivity of a lead firm and its drilling contractor is enhanced significantly as they accumulate experience working together. Moreover, this result is robust to other relationship specificities and standard firm-specific learning-by-doing effects. The second chapter, "Drill Now or Drill Later: The Effect of Expected Volatility on Investment," investigates the extent to which firms' drilling behavior accords with a key prescription of real options theory: irreversible investments such as drilling should be deferred when the expected volatility of the investments' payoffs increases. I combine detailed data on oil drilling with expectations of future oil price volatility that I derive from the NYMEX futures options market. Conditioning on expected price levels, I find that oil production companies significantly reduce the number of wells they drill when expected price volatility is high. I conclude with "Daylight Time and Energy: Evidence from an Australian Experiment," co-authored with Hendrik Wolff. This chapter assesses DST's impact on electricity demand using a quasi-experiment in which parts of Australia extended DST in 2000 to facilitate the Sydney Olympics. We show that the extension did not reduce overall

  19. The Comfortable Home and Energy Consumption

    DEFF Research Database (Denmark)

    Madsen, Line Valdorff

    2017-01-01

    This paper investigates relations between notions of comfort and notions of home, aiming at a better understanding of residential comfort and the related energy consumption. Residential comfort is examined through a practice-theoretical lens and as something that appears in between the social...... concludes that the notion of home is central in understanding comfort and energy consumption in dwellings, as conceptions of comfort and home are intertwined but also carry different meanings. The different rooms of a house relate differently to the notions of home and comfort, which has implications...... for how energy is consumed within the home....

  20. CONSUMPTION OF REDUCED-FAT PEANUT BUTTER IN ADDITION TO THE CONSUMPTION OF REGULAR PEANUT BUTTER

    OpenAIRE

    He, Senhui; Fletcher, Stanley M.; Rimal, Arbindra

    2004-01-01

    A set of factors has been identified to affect consumption of reduced-fat peanut butter in addition to regular peanut butter. We found that consumption of reduced-fat peanut butter, which is an imperfect substitute for regular peanut butter, may expand total demand for peanut butter. Interestingly, for those who usually buy the same brand of peanut butter, their consumption of reduced-fat peanut butter is more likely in addition to consumption of regular peanut butter, implying promotion of a...

  1. ENERGY CONSUMPTION AND REAL GDP IN IRAN

    Directory of Open Access Journals (Sweden)

    Ali Akbar Naji Meidani

    2014-01-01

    Full Text Available As one of the most important production factors and one of the most urgent final products, energy has a special position in the growth and development of the country. This paper examines the causal relationship between Real GDP and energy consumption in various economic sectors including (household and commercial, industry, transportation and agriculture sectors for Iran during 1967–2010 using the time series technique known as the Toda-Yamamoto method. Moreover, an error correction model is also estimated so that the results of these two methods are compared. We found a strong unidirectional causality from energy consumption in industry sector to real gross domestic product. Energy consumption in industry sector can observably promote the development of economy.

  2. A review on buildings energy consumption information

    Energy Technology Data Exchange (ETDEWEB)

    Perez-Lombard, Luis [Grupo de Termotecnia, Escuela Superior de Ingenieros, Universidad de Sevilla (Spain); Ortiz, Jose; Pout, Christine [Sustainable Energy Centre, BRE, Watford (United Kingdom)

    2008-07-01

    The rapidly growing world energy use has already raised concerns over supply difficulties, exhaustion of energy resources and heavy environmental impacts (ozone layer depletion, global warming, climate change, etc.). The global contribution from buildings towards energy consumption, both residential and commercial, has steadily increased reaching figures between 20% and 40% in developed countries, and has exceeded the other major sectors: industrial and transportation. Growth in population, increasing demand for building services and comfort levels, together with the rise in time spent inside buildings, assure the upward trend in energy demand will continue in the future. For this reason, energy efficiency in buildings is today a prime objective for energy policy at regional, national and international levels. Among building services, the growth in HVAC systems energy use is particularly significant (50% of building consumption and 20% of total consumption in the USA). This paper analyses available information concerning energy consumption in buildings, and particularly related to HVAC systems. Many questions arise: Is the necessary information available? Which are the main building types? What end uses should be considered in the breakdown? Comparisons between different countries are presented specially for commercial buildings. The case of offices is analysed in deeper detail. (author)

  3. A biological/chemical process for reduced waste and energy consumption, Caprolactam production: Phase 1, Select microorganisms and demonstrate feasibility. Final report

    Energy Technology Data Exchange (ETDEWEB)

    St.Martin, E.J.

    1995-08-01

    A novel biological/chemical process for converting cyclohexane into caprolactam was investigated. Microorganisms in a bioreactor would be used to convert cyclohexane into caprolactone followed by chemical synthesis of caprolactam using ammonia. The proposed bioprocess would be more energy efficient and reduce byproducts and wastes that are generated by the current chemical process. We have been successful in isolating from natural soil and water samples two microorganisms that can utilize cyclohexane as a sole source of carbon and energy for growth. These microorganisms were shown to have the correct metabolic intermediates and enzymes to convert cyclohexane into cyclohexanol, cyclohexanone and caprolactone. Genetic techniques to create and select for caprolactone hydrolase negative-mutants are being developed. These blocked-mutants will be used to convert cyclohexane into caprolactone but, because of the block, be unable to metabolize the caprolactone further and excrete it as a final end product.

  4. Predictive Model of Energy Consumption in Beer Production

    Directory of Open Access Journals (Sweden)

    Tiecheng Pu

    2013-07-01

    Full Text Available The predictive model of energy consumption is presented based on subtractive clustering and Adaptive-Network-Based Fuzzy Inference System (for short ANFIS in the beer production. Using the subtractive clustering on the historical data of energy consumption, the limit of artificial experience is conquered while confirming the number of fuzzy rules. The parameters of the fuzzy inference system are acquired by the structure of adaptive network and hybrid on-line learning algorithm. The method can predict and guide the energy consumption of the factual production process. The reducing consumption scheme is provided based on the actual situation of the enterprise. Finally, using concrete examples verified the feasibility of this method comparing with the Radial Basis Functions (for short RBF neural network predictive model.

  5. The effect of energy performance regulations on energy consumption

    NARCIS (Netherlands)

    Guerra-Santin, O.; Itard, L.

    2012-01-01

    Governments have developed energy performance regulations in order to lower energy consumption in the housing stock. Most of these regulations are based on the thermal quality of the buildings. In the Netherlands, the energy efficiency for new buildings is expressed as the EPC (energy performance co

  6. The effect of energy performance regulations on energy consumption

    NARCIS (Netherlands)

    Guerra-Santin, O.; Itard, L.

    2012-01-01

    Governments have developed energy performance regulations in order to lower energy consumption in the housing stock. Most of these regulations are based on the thermal quality of the buildings. In the Netherlands, the energy efficiency for new buildings is expressed as the EPC (energy performance co

  7. The effect of energy performance regulations on energy consumption

    NARCIS (Netherlands)

    Guerra-Santin, O.; Itard, L.

    2012-01-01

    Governments have developed energy performance regulations in order to lower energy consumption in the housing stock. Most of these regulations are based on the thermal quality of the buildings. In the Netherlands, the energy efficiency for new buildings is expressed as the EPC (energy performance

  8. Understanding energy consumption of sensor enabled applications on mobile phones.

    Science.gov (United States)

    Crk, Igor; Albinali, Fahd; Gniady, Chris; Hartman, John

    2009-01-01

    Recent research in ubiquitous and mobile computing uses mobile phones and wearable accelerometers to monitor individuals' physical activities for personalized and proactive health care. The goal of this project is to measure and reduce the energy demand placed on mobile phones that monitor individuals' physical activities for extended periods of time with limited access to battery recharging and mobile phone reception. Many issues must be addressed before mobile phones become a viable platform for remote health monitoring, including: security, reliability, privacy, and, most importantly, energy. Mobile phones are battery-operated, making energy a critical resource that must be carefully managed to ensure the longest running time before the battery is depleted. In a sense, all other issues are secondary, since the mobile phone will simply not function without energy. In this project, we therefore focus on understanding the energy consumption of a mobile phone that runs MIT wockets, physical activity monitoring applications, and consider ways to reduce its energy consumption.

  9. Energy consumption of buildings depends on the daylight

    Directory of Open Access Journals (Sweden)

    Piotrowska Ewa

    2017-01-01

    Full Text Available In order to reduce energy consumption in heated buildings and thus fossil fuels, there is a need for proper modernization of existing buildings and new construction with reduced energy demand. The size and the insulation of windows have a decisive influence on the amount of heat loss. The study looks into the impact of decreased power consumption through optimal use of sunlight through the selection of the size of windows, type of windows, and adjusting the light intensity using an automatic control of lighting according to the amount of sunlight reaching the room. The research related to the differences between the six types of windows in relations to the energy consumption of the building.

  10. Structural Evolution of Household Energy Consumption: A China Study

    Directory of Open Access Journals (Sweden)

    Qingsong Wang

    2015-04-01

    Full Text Available Sustainable energy production and consumption is one of the issues for the sustainable development strategy in China. As China’s economic development paradigm shifts, household energy consumption (HEC has become a focus of achieving national goals of energy efficiency and greenhouse gas reduction. The information entropy model and LMDI model were employed in this study in order to analyse the structural evolution of HEC, as well as its associated critical factors. The results indicate that the information entropy of HEC increased gradually, and coal will be reduced by clean energies, such as natural gas and liquefied petroleum gas. The information entropy tends to stabilize and converge due to rapid urbanization. Therefore, from the perspective of environmental protection and natural resource conservation, the structure of household energy consumption will be optimized. This study revealed that residents’ income level is one of the most critical factors for the increase of energy consumption, while the energy intensity is the only driving force for the reduction of HEC. The accumulated contribution of these two factors to the HEC is 240.53% and −161.75%, respectively. It is imperative to improve the energy efficiency in the residential sector. Recommendations are provided to improve the energy efficiency-related technologies, as well as the standards for the sustainable energy strategy.

  11. Energy Consumption of Fast Ferries in Danish Domestic Transport

    DEFF Research Database (Denmark)

    Petersen, Morten Steen; Jørgensen, Kaj

    1997-01-01

    Analysis of energy consumption in connection with selected passenger transport trip chains. In particular the publication aims to evaluate the energy consumption of fast ferries in Denmark.......Analysis of energy consumption in connection with selected passenger transport trip chains. In particular the publication aims to evaluate the energy consumption of fast ferries in Denmark....

  12. Scheduling home-appliances to optimize energy consumption

    DEFF Research Database (Denmark)

    Rossello Busquet, Ana

    In order to optimize the energy consumption, energy demand peaks should be avoided, and energy consumption should be smoothly distributed over time. This can be achieved by setting a maximum energy consumption per user’s household. In other words, the overall consumption of the user’s appliances ...

  13. Energy Consumption of Fast Ferries in Danish Domestic Transport

    DEFF Research Database (Denmark)

    Petersen, Morten Steen; Jørgensen, Kaj

    1997-01-01

    Analysis of energy consumption in connection with selected passenger transport trip chains. In particular the publication aims to evaluate the energy consumption of fast ferries in Denmark.......Analysis of energy consumption in connection with selected passenger transport trip chains. In particular the publication aims to evaluate the energy consumption of fast ferries in Denmark....

  14. Scheduling home-appliances to optimize energy consumption

    DEFF Research Database (Denmark)

    Rossello Busquet, Ana

    In order to optimize the energy consumption, energy demand peaks should be avoided, and energy consumption should be smoothly distributed over time. This can be achieved by setting a maximum energy consumption per user’s household. In other words, the overall consumption of the user’s appliances...

  15. A Meta Model for Domestic Energy Consumption

    Directory of Open Access Journals (Sweden)

    K.,J SREEKANTH

    2011-01-01

    Full Text Available Prediction of energy consumption particularly in micro level is of vital importance in terms of energy planning and also implementation of any Clean Development Mechanism (CDM activities that has become the order of the world today. It may be difficult to model household energy consumption using conventional methods such as time series forecasting due to many influencing factors. This paper presents a step wise regression model for forecasting domestic energy consumption based on micro level household survey data collected from Kerala, a state in southern part of India. The analysis of the data reveals significant influence of socio-economic, demographic, geographic, and family attributes upon total household energy requirements. While a wide variation in the pattern of energy requirements across the domestic sector belonging to different expenditure classes, per capita income level can be identified as the most important explanatory variable influencing variation in energy requirements. The models developed also demonstrates the influence of per capita land area, residential area among the higher income group while average age and literacy forms significant variables among the lower income group.

  16. Energy consumption, pollutant emissions and economic growth in South Africa

    Energy Technology Data Exchange (ETDEWEB)

    Menyah, Kojo [London Metropolitan Business School, London Metropolitan University (United Kingdom); Wolde-Rufael, Yemane [Independent Researcher (United Kingdom)

    2010-11-15

    This paper examines the long-run and the causal relationship between economic growth, pollutant emissions and energy consumption for South Africa for the period 1965-2006 in a multivariate framework which includes labour and capital as additional variables. Using the bound test approach to cointegration, we found a short-run as well as a long-run relationship among the variables with a positive and a statistically significant relationship between pollutant emissions and economic growth. Further, applying a modified version of the Granger causality test we also found a unidirectional causality running from pollutant emissions to economic growth; from energy consumption to economic growth and from energy consumption to CO{sub 2} emissions all without a feedback. The econometric evidence suggests that South Africa has to sacrifice economic growth or reduce its energy consumption per unit of output or both in order to reduce pollutant emissions. In the long-run however, it is possible to meet the energy needs of the country and at the same time reduce CO{sub 2} emissions by developing energy alternatives to coal, the main source of CO{sub 2} emissions. However, the econometric results upon which the policy suggestions are made should be interpreted with care, as they may not be sufficiently robust enough to categorically warrant the choice of an unpalatable policy option by South Africa. (author)

  17. Stress of urban energy consumption on air environment

    Institute of Scientific and Technical Information of China (English)

    Gang YAN; Li LI; Bin CHEN

    2009-01-01

    With rapid urbanization and heavy industria-lization as well as the rapid increase of cars in China, the effect of energy consumption on urban air environment is increasingly becoming serious, and has become a hot topic for both scholars and decision-makers. This paper explores the effect mechanism and regulation of urban energy consumption on the air environment, and summarizes the framework of the stress effect relationship and the evolutionary process. In accordance with the effect relationship of the internal factors between the two, analytic approaches studying the stress effect of urban energy consumption on air environment are proposed, including the analysis of air environment effects caused by urban energy consumption structure change, and the analysis of air environment effects caused by urban energy economic efficiency change, as well as a decomposition analysis of air pollutant emission caused by urban energy consumption. Applying the above-mentioned approaches into a case study on Beijing City, this paper analyzes the effect relationship among urban energy consumption structure improvement, energy economic efficiency increase and air quality change since the period when Beijing City officially proposed to bid for the 2008 Olympic Games in 1998. In addition, it further analyzes the effect and contribution of urban industrial activity level, industrial economic structure, industrial energy intensity, and industrial energy structure as well as emission coefficients on the change in industrial SO2 emission, which can provide valuable information to the government for making comPrehensive environmental policies, with the use of the logarithmic mean Divisia index (LMDI) method. It is shown that under the precondition that the industrial economy maintain a continuous and rapid increase, improvements in energy intensity and a decline in emission coefficients are the main means for reducing Beijing's industrial SO2 emissions.

  18. Computer Profile of School Facilities Energy Consumption.

    Science.gov (United States)

    Oswalt, Felix E.

    This document outlines a computerized management tool designed to enable building managers to identify energy consumption as related to types and uses of school facilities for the purpose of evaluating and managing the operation, maintenance, modification, and planning of new facilities. Specifically, it is expected that the statistics generated…

  19. Energy sustainability: consumption, efficiency, and environmental impact

    Science.gov (United States)

    One of the critical challenges in achieving sustainability is finding a way to meet the energy consumption needs of a growing population in the face of increasing economic prosperity and finite resources. According to ecological footprint computations, the global resource consump...

  20. Energy consumption in static muscle contraction

    NARCIS (Netherlands)

    Koerhuis, CL; Hof, AL; van der Heide, F.M.

    2003-01-01

    Energy consumption during static contraction of the human triceps surae muscles was studied in 11 healthy subjects. The subjects had to stand intermittently on the left and then right foot at different frequencies (for periods of 15 s, 10 s or 5 s), first on the whole foot and then on the forefoot.

  1. Energy consumption in static muscle contraction

    NARCIS (Netherlands)

    Koerhuis, CL; Hof, AL; van der Heide, F.M.

    Energy consumption during static contraction of the human triceps surae muscles was studied in 11 healthy subjects. The subjects had to stand intermittently on the left and then right foot at different frequencies (for periods of 15 s, 10 s or 5 s), first on the whole foot and then on the forefoot.

  2. Energy sustainability: consumption, efficiency, and environmental impact

    Science.gov (United States)

    One of the critical challenges in achieving sustainability is finding a way to meet the energy consumption needs of a growing population in the face of increasing economic prosperity and finite resources. According to ecological footprint computations, the global resource consump...

  3. Energy consumption in the pipeline industry

    Energy Technology Data Exchange (ETDEWEB)

    Banks, W. F.

    1977-12-31

    Estimates are developed of the energy consumption and energy intensity (EI) of five categories of U.S. pipeline industries: natural gas, crude oil, petroleum products, coal slurry, and water. For comparability with other transportation modes, it is desirable to calculate EI in Btu/Ton-Mile, and this is done, although the necessary unit conversions introduce additional uncertainties. Since water and sewer lines operate by lift and gravity, a comparable EI is not definable.

  4. Socio-Demographic Differences in Energy Drink Consumption and Reasons for Consumption among US College Students

    Science.gov (United States)

    Poulos, Natalie S.; Pasch, Keryn E.

    2016-01-01

    Background: Energy drink consumption has become increasingly prevalent among US college students, yet little is known about current rates of consumption and reasons for consumption among current energy drink users, particularly differences related to gender and race/ethnicity. Objectives: To better understand energy drink consumption alone and…

  5. Socio-Demographic Differences in Energy Drink Consumption and Reasons for Consumption among US College Students

    Science.gov (United States)

    Poulos, Natalie S.; Pasch, Keryn E.

    2016-01-01

    Background: Energy drink consumption has become increasingly prevalent among US college students, yet little is known about current rates of consumption and reasons for consumption among current energy drink users, particularly differences related to gender and race/ethnicity. Objectives: To better understand energy drink consumption alone and…

  6. Dwelling Buildings’ Energy Certification by Total Energy Consumption

    OpenAIRE

    Belindževa-Korkla, O; Krēsliņš, A; Borodiņecs, A

    2005-01-01

    One of the requirements of the Directive 2002/91/EC on the energy performance of buildings is introduction in the EU member countries of energy certification of buildings. It has to be implemented starting from 2006. In Latvia the energy certification scheme for dwelling buildings was developed in RTU in 2000 and successfully implemented in Ogre in 2002-2004. The existing buildings’ energy certification scheme takes into account only energy consumption of space heating and hot water supply. I...

  7. Cost/benefit tradeoffs for reducing the energy consumption of the commercial air transportation system. Volume 2: Market and economic analyses

    Science.gov (United States)

    Vanabkoude, J. C.

    1976-01-01

    The impact of the most promising fuel conserving options on fuel consumption, passenger demand, operating costs, and airline profits when implemented into the U.S. domestic and international airline fleets is assessed. The potential fuel savings achievable in the U.S. scheduled air transportation system over the forecast period, 1973-1990, are estimated.

  8. Quantification model for energy consumption in edification

    Directory of Open Access Journals (Sweden)

    Mercader, Mª P.

    2012-12-01

    Full Text Available The research conducted in this paper focuses on the generation of a model for the quantification of energy consumption in building. This is to be done through one of the most relevant environmental impact indicators associated with weight per m2 of construction, as well as the energy consumption resulting from the manufacturing process of materials used in building construction. The practical application of the proposed model on different buildings typologies in Seville, will provide information regarding the building materials, the subsystems and the most relevant construction elements. Hence, we will be able to observe the impact the built surface has on the environment. The results obtained aim to reference the scientific community, providing quantitative data comparable to other types of buildings and geographical areas. Furthermore, it may also allow the analysis and the characterization of feasible solutions to reduce the environmental impact generated by the different materials, subsystems and construction elements commonly used in the different building types defined in this study.

    La investigación realizada en el presente trabajo plantea la generación de un modelo de cuantificación del consumo energético en edificación, a través de uno de los indicadores de impacto ambiental más relevantes asociados al peso por m2 de construcción, el consumo energético derivado del proceso de fabricación de los materiales de construcción empleados en edificación. La aplicación práctica del modelo propuesto sobre diferentes tipologías edificatorias en Sevilla aportará información respecto a los materiales de construcción, subsistemas y elementos constructivos más impactantes, permitiendo visualizar la influencia que presenta la superficie construida en cuanto al impacto ambiental generado. Los resultados obtenidos pretenden servir de referencia a la comunidad científica, aportando datos num

  9. Simulation Tool For Energy Consumption and Production

    DEFF Research Database (Denmark)

    Nysteen, Michael; Mynderup, Henrik; Poulsen, Bjarne

    2013-01-01

    In order to promote adoption of smart grid with the general public it is necessary to be able to visualize the benefits of a smart home. Software tools that model the effects can help significantly with this. However, only little work has been done in the area of simulating and visualizing...... the energy consumption in smart homes. This paper presents a prototype simulation tool that allows graphical modeling of a home. Based on the modeled homes the user is able to simulate the energy consumptions and compare scenarios. The simulations are based on dynamic weather and energy price data as well...... as a controller unit of the user’s choice. The results of the simulations can be compared using a dynamic reporting window that allows the user to create custom charts of the data. The application has been designed such that it can easily be extended with additional controller units, price and weather data...

  10. Biodiversity conservation: The key is reducing meat consumption.

    Science.gov (United States)

    Machovina, Brian; Feeley, Kenneth J; Ripple, William J

    2015-12-01

    The consumption of animal-sourced food products by humans is one of the most powerful negative forces affecting the conservation of terrestrial ecosystems and biological diversity. Livestock production is the single largest driver of habitat loss, and both livestock and feedstock production are increasing in developing tropical countries where the majority of biological diversity resides. Bushmeat consumption in Africa and southeastern Asia, as well as the high growth-rate of per capita livestock consumption in China are of special concern. The projected land base required by 2050 to support livestock production in several megadiverse countries exceeds 30-50% of their current agricultural areas. Livestock production is also a leading cause of climate change, soil loss, water and nutrient pollution, and decreases of apex predators and wild herbivores, compounding pressures on ecosystems and biodiversity. It is possible to greatly reduce the impacts of animal product consumption by humans on natural ecosystems and biodiversity while meeting nutritional needs of people, including the projected 2-3 billion people to be added to human population. We suggest that impacts can be remediated through several solutions: (1) reducing demand for animal-based food products and increasing proportions of plant-based foods in diets, the latter ideally to a global average of 90% of food consumed; (2) replacing ecologically-inefficient ruminants (e.g. cattle, goats, sheep) and bushmeat with monogastrics (e.g. poultry, pigs), integrated aquaculture, and other more-efficient protein sources; and (3) reintegrating livestock production away from single-product, intensive, fossil-fuel based systems into diverse, coupled systems designed more closely around the structure and functions of ecosystems that conserve energy and nutrients. Such efforts would also impart positive impacts on human health through reduction of diseases of nutritional extravagance. Copyright © 2015 Elsevier B.V. All

  11. Reducing stress and fuel consumption providing road information

    Directory of Open Access Journals (Sweden)

    Víctor CORCOBA MAGAÑA

    2014-12-01

    Full Text Available In this paper, we propose a solution to reduce the stress level of the driver, minimize fuel consumption and improve safety. The system analyzes the driving style and the driver’s workload during the trip while driving. If it discovers an area where the stress increases and the driving style is not appropriate from the point of view of energy efficiency and safety for a particular driver, the location of this area is saved in a shared database. On the other hand, the implemented solution warns a particular user when approaching a region where the driving is difficult (high fuel consumption and stress using the shared database based on previous recorded knowledge of similar drivers in that area. In this case, the proposal provides an optimal deceleration profile if the vehicle speed is not adequate. Therefore, he or she may adjust the vehicle speed with both a positive impact on the driver workload and fuel consumption. The Data Envelopment Analysis algorithm is used to estimate the efficiency of driving and the driver’s workload in in each area. We employ this method because there is no preconceived form on the data in order to calculate the efficiency and stress level. A validation experiment has been conducted using both a driving simulator and a real environment with 12 participants who made 168 driving tests. The system reduced the slowdowns (38%, heart rate (4.70%, and fuel consumption (12.41% in the real environment. The proposed solution is implemented on Android mobile devices and does not require the installation of infrastructure on the road. It can be installed on any model of vehicle.

  12. Electrical energy consumption control apparatuses and electrical energy consumption control methods

    Science.gov (United States)

    Hammerstrom, Donald J.

    2012-09-04

    Electrical energy consumption control apparatuses and electrical energy consumption control methods are described. According to one aspect, an electrical energy consumption control apparatus includes processing circuitry configured to receive a signal which is indicative of current of electrical energy which is consumed by a plurality of loads at a site, to compare the signal which is indicative of current of electrical energy which is consumed by the plurality of loads at the site with a desired substantially sinusoidal waveform of current of electrical energy which is received at the site from an electrical power system, and to use the comparison to control an amount of the electrical energy which is consumed by at least one of the loads of the site.

  13. Assessing the Energy Consumption of Smartphone Applications

    Science.gov (United States)

    Abousaleh, Mustafa M.

    Mobile devices are increasingly becoming essential in people's lives. The advancement in technology and mobility factor are allowing users to utilize mobile devices for communication, entertainment, financial planning, fitness tracking, etc. As a result, mobile applications are also becoming important factors contributing to user utility. However, battery capacity is the limiting factor impacting the quality of user experience. Hence, it is imperative to understand how much energy impact do mobile apps have on the system relative to other device activities. This thesis presents a systematic studying of the energy impact of mobile apps features. Time-series electrical current measurements are collected from 4 different modern smartphones. Statistical analysis methodologies are used to calculate the energy impact of each app feature by identifying and extracting mobile app-feature events from the overall current signal. In addition, the app overhead energy costs are also computed. Total energy consumption equations for each component is developed and an overall total energy consumption equation is presented. Minutes Lost (ML) of normal phone operations due to the energy consumption of the mobile app functionality is computed for cases where the mobile app is simulated to run on the various devices for 30 minutes. Tutela Technologies Inc. mobile app, NAT, is used for this study. NAT has two main features: QoS and Throughput. The impact of the QoS feature is indistinguishable, i.e. ML is zero, relative to other phone activities. The ML with only the TP feature enabled is on average 2.1 minutes. Enabling the GPS increases the ML on average to 11.5 minutes. Displaying the app GUI interface in addition to running the app features and enabling the GPS results in an average ML of 12.4 minutes. Amongst the various mobile app features and components studied, the GPS consumes the highest amount of energy. It is estimated that the GPS increases the ML by about 448%.

  14. Computer simulated building energy consumption for verification of energy conservation measures in network facilities

    Science.gov (United States)

    Plankey, B.

    1981-01-01

    A computer program called ECPVER (Energy Consumption Program - Verification) was developed to simulate all energy loads for any number of buildings. The program computes simulated daily, monthly, and yearly energy consumption which can be compared with actual meter readings for the same time period. Such comparison can lead to validation of the model under a variety of conditions, which allows it to be used to predict future energy saving due to energy conservation measures. Predicted energy saving can then be compared with actual saving to verify the effectiveness of those energy conservation changes. This verification procedure is planned to be an important advancement in the Deep Space Network Energy Project, which seeks to reduce energy cost and consumption at all DSN Deep Space Stations.

  15. Chinese kangs and building energy consumption

    Institute of Scientific and Technical Information of China (English)

    LI YuGuo; ZHUANG Zhi; LIU JiaPing

    2009-01-01

    Chinese kangs are an integrated system for cooking, sleeping and heating in rural Northern China with more than 2000 years history. In 2004 there were 67 million Chinese kangs used by 44 million rural families or 174 million people. Chinese kangs store surplus heat from stove during cooking and releases it later for both home heating and localized bed heating. Such a widely used heating system has been rarely studied. Understanding kangs is important for developing new effective home heating systems for better energy efficiency and improving indoor air quality in Northern China. In this paper,we review and present some preliminary results from our field measurement and mathematical modeling, and discuss the development of Chinese kangs as related to future energy consumption in rural homes, and building energy consumption in China in general. We suggest that transition and new technologies for rural home heating in Northern China, i.e. the future of Chinese kangs, should be considered as the top priority in managing future building energy consumption in China.

  16. Comparing the Life Cycle Energy Consumption, Global ...

    Science.gov (United States)

    Managing the water-energy-nutrient nexus for the built environment requires, in part, a full system analysis of energy consumption, global warming and eutrophication potentials of municipal water services. As an example, we evaluated the life cycle energy use, greenhouse gas (GHG) emissions and aqueous nutrient releases of the whole anthropogenic municipal water cycle starting from raw water extraction to wastewater treatment and reuse/discharge for five municipal water and wastewater systems. The assessed options included conventional centralized services and four alternative options following the principles of source-separation and water fit-for-purpose. The comparative life cycle assessment identified that centralized drinking water supply coupled with blackwater energy recovery and on-site greywater treatment and reuse was the most energyand carbon-efficient water service system evaluated, while the conventional (drinking water and sewerage) centralized system ranked as the most energy- and carbon-intensive system. The electricity generated from blackwater and food residuals co-digestion was estimated to offset at least 40% of life cycle energy consumption for water/waste services. The dry composting toilet option demonstrated the lowest life cycle eutrophication potential. The nutrients in wastewater effluent are the dominating contributors for the eutrophication potential for the assessed system configurations. Among the parameters for which variability

  17. 氨碱法纯碱生产的几项节能降耗措施%Measures to Save Energy and Reduce Consumption in Soda Ash Production with Ammonia- Ash Technology

    Institute of Scientific and Technical Information of China (English)

    严秀英

    2012-01-01

    The advanced technology with energy saving and consumption reducint in the 1 000 kl/a soda ash project is introduced in the article. How to reduce the ammonia consumption and recycle the muddy water are also introduced. With the principle of decreasing, recycling and resourcing, and with the basic characteristics of low consumption, zero discharge and high efficiency , the recycling utilization factor of water resource is enhanced. Technological modification for water resource utilization is carried. That what had been done has had good effect.%将公司100万t纯碱项目在节能降耗方面所采用的先进技术进行介绍,并具体介绍如何降低氨耗及浊水循环再利用,公司以减量化、再利用、资源化为原则,以低消耗、零排放、高效率为基本特征,加大水资源的循环利用程度,对水资源利用进行了多项技术改造,得到了良好的效果.

  18. Data mining, mining data : energy consumption modelling

    Energy Technology Data Exchange (ETDEWEB)

    Dessureault, S. [Arizona Univ., Tucson, AZ (United States)

    2007-09-15

    Most modern mining operations are accumulating large amounts of data on production and business processes. Data, however, provides value only if it can be translated into information that appropriate users can utilize. This paper emphasized that a new technological focus should emerge, notably how to concentrate data into information; analyze information sufficiently to become knowledge; and, act on that knowledge. Researchers at the Mining Information Systems and Operations Management (MISOM) laboratory at the University of Arizona have created a method to transform data into action. The data-to-action approach was exercised in the development of an energy consumption model (ECM), in partnership with a major US-based copper mining company, 2 software companies, and the MISOM laboratory. The approach begins by integrating several key data sources using data warehousing techniques, and increasing the existing level of integration and data cleaning. An online analytical processing (OLAP) cube was also created to investigate the data and identify a subset of several million records. Data mining algorithms were applied using the information that was isolated by the OLAP cube. The data mining results showed that traditional cost drivers of energy consumption are poor predictors. A comparison was made between traditional methods of predicting energy consumption and the prediction formed using data mining. Traditionally, in the mines for which data were available, monthly averages of tons and distance are used to predict diesel fuel consumption. However, this article showed that new information technology can be used to incorporate many more variables into the budgeting process, resulting in more accurate predictions. The ECM helped mine planners improve the prediction of energy use through more data integration, measure development, and workflow analysis. 5 refs., 11 figs.

  19. Energy Consumption in Rural China: Analysis of Rural Living Energy in Beijing

    Science.gov (United States)

    Yang, Yu; Yifang, Liu; Wei, Zhu

    2017-08-01

    Under the pressure of climate change and international carbon reduction targets, long-neglected rural energy consumption needs to be given high priority. China’s rural energy consumption structure is in the transition from non-commercial to commercial sources, and rural energy has become a key determinant to slow down the carbon emission growth. This paper systematically calibrates the current situation of rural energy consumption in Beijing by using the survey data of 1866 households in 13 districts and counties in Beijing based on the trend of energy supply and demand change in China. To this end, the paper combines rural policy measures to assess the pressure on coal-burning and clean energy supply trends, puts forward the rural energy structure adjustment path, with a view to promoting the use of clean energy in rural areas and reduce the environmental consequences of coal-burning.

  20. Green supply chain management using the queuing theory to handle congestion and reduce energy consumption and emissions from supply chain transportation fleet

    National Research Council Canada - National Science Library

    Arvin Aziziankohan; Fariborz Jolai; Mohammad Khalilzadeh; Roya Soltani; Reza Tavakkoli-Moghaddam

    2017-01-01

    .... Green products are resulted from the application of green supply chain management strategies to the organizations' performance strategies, so that we can reduce environmental pollutants and wastes...

  1. Energy consumption and income. A semiparametric panel data analysis

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen-Van, Phu [BETA, CNRS and Universite de Strasbourg, 61 avenue de la Foret Noire, F-67085 Strasbourg (France)

    2010-05-15

    This paper proposes a semiparametric analysis for the study of the relationship between energy consumption per capita and income per capita for an international panel dataset. It shows little evidence for the existence of an environmental Kuznets curve for energy consumption. Energy consumption increases with income for a majority of countries and then stabilizes for very high income countries. Neither changes in energy structure nor macroeconomic cycle/technological change have significant effect on energy consumption. (author)

  2. Determinants of household energy consumption in India

    Energy Technology Data Exchange (ETDEWEB)

    Ekholm, Tommi [VTT Technical Research Centre of Finland, P.O. Box 1000, FIN-02044 VTT (Finland); TKK Helsinki University of Technology, Espoo (Finland); Krey, Volker; Pachauri, Shonali; Riahi, Keywan [International Institute for Applied Systems Analysis, Laxenburg (Austria)

    2010-10-15

    Improving access to affordable modern energy is critical to improving living standards in the developing world. Rural households in India, in particular, are almost entirely reliant on traditional biomass for their basic cooking energy needs. This has adverse effects on their health and productivity, and also causes environmental degradation. This study presents a new generic modelling approach, with a focus on cooking fuel choices, and explores response strategies for energy poverty eradication in India. The modelling approach analyzes the determinants of fuel consumption choices for heterogeneous household groups, incorporating the effect of income distributions and traditionally more intangible factors such as preferences and private discount rates. The methodology is used to develop alternate future scenarios that explore how different policy mechanisms such as fuel subsidies and micro-financing can enhance the diffusion of modern, more efficient, energy sources in India. (author)

  3. Global energy consumption for direct water use

    Science.gov (United States)

    Liu, Y.; Hejazi, M. I.; Kim, S. H.; Kyle, P.; Davies, E. G.; Miralles, D. G.; Teuling, R.; He, Y.; Niyogi, D.

    2015-12-01

    Despite significant efforts to quantify the mutual inter-dependence of the water and energy sectors, global energy for water (EFW) remains poorly understood, resulting in biases in energy accounting that directly affect water and energy management and policy. We firstly evaluate the global energy consumption for direct water use from 1973 to 2012 with sectoral, regional and process-level details. Over the 40-year period, we detected multiple shifts in EFW by county and region. For example, we find that India, the Middle East and China have surpassed the United States as the three largest consumers of EFW since 2003, mostly because of rapid growth in groundwater-based irrigation, desalination, and industrial and municipal water use, respectively. Globally, EFW accounts for 1-3% of total primary energy consumption in 2010, of which 52% is surface water, 36% is groundwater, and 12% is non-fresh water. The sectoral allocation of EFW includes municipal (45%), industrial (29%), and agricultural use (26%), and process-level contributions are from source/conveyance (41%), water purification (19%), water distribution (13%) and wastewater treatment (22%). Our evaluation suggests that the EFW may increase in importance in the future due to growth in population and income, and depletion of surface and shallow aquifer water resources in water-scarce regions. We are incorporating this element into an integrated assessment model (IAM) and linking it back to energy balance within that IAM. By doing this, we will then explore the impacts of EFW on the global energy market (e.g., changes in the share of groundwater use and desalination), and the uncertainty of future EFW under different shared social pathway (SSP) and representative concentration pathway (RCP) scenarios, and consequences on the emission of greenhouse gases as well. We expect these EFW induced impacts will be considerable, and will then have significant implications for adaptive management and policy making.

  4. Estimating the energy consumption impact of casual carpooling

    Energy Technology Data Exchange (ETDEWEB)

    Minett, P. [Trip Convergence Ltd, Epsom, Auckland (New Zealand); Pearce, J. [Trip Convergence Ltd, Remuera, Auckland (New Zealand)

    2011-07-01

    Some of the transportation energy consumed during peak commuter periods is wasted through slow running in congested traffic. Strategies to increase average vehicle occupancy (and reduce vehicle counts and congestion) could be expected to be at the forefront of energy conservation policies. Casual carpooling (also called 'slugging') is a system of carpooling without trip-by-trip pre-arrangement. It operates in three US cities, and has been suggested in New Zealand as a strategy for managing transportation challenges when oil prices rise. The objective of the paper is to find out if casual carpooling reduces energy consumption, and if so, how much. Energy consumption by single occupant vehicles; casual carpool vehicles; and a mix of buses and single occupant vehicles; are estimated and compared, and the impact on the rest of the traffic is calculated. The paper estimates that casual carpooling in San Francisco is conserving in the order of 1.7 to 3.5 million liters of gasoline per year, or 200-400 liters for each participant, much of which comes from the impact on the rest of the traffic. The paper concludes by calling for applied research to discover how to catalyze casual carpooling in other cities as a means of reducing transportation energy consumption. (authors)

  5. Estimating the Energy Consumption Impact of Casual Carpooling

    Directory of Open Access Journals (Sweden)

    Paul Minett

    2011-01-01

    Full Text Available Some of the transportation energy consumed during peak commuter periods is wasted through slow running in congested traffic. Strategies to increase average vehicle occupancy (and reduce vehicle counts and congestion could be expected to be at the forefront of energy conservation policies. Casual carpooling (also called “slugging” is a system of carpooling without trip-by-trip pre-arrangement. It operates in three US cities, and has been suggested in New Zealand as a strategy for managing transportation challenges when oil prices rise. The objective of the paper is to find out if casual carpooling reduces energy consumption, and if so, how much. Energy consumption by single occupant vehicles; casual carpool vehicles; and a mix of buses and single occupant vehicles; are estimated and compared, and the impact on the rest of the traffic is calculated. The paper estimates that casual carpooling in San Francisco is conserving in the order of 1.7 to 3.5 million liters of gasoline per year, or 200-400 liters for each participant, much of which comes from the impact on the rest of the traffic. The paper concludes by calling for applied research to discover how to catalyze casual carpooling in other cities as a means of reducing transportation energy consumption.

  6. Reducing Alcohol Consumption through Television Advertising.

    Science.gov (United States)

    Barber, James G.; And Others

    1989-01-01

    Assessed impact of television commercial based on controlled-drinking principles. Measures were taken 12 months prior to start of campaign and 3 weeks after campaign from regular drinkers of general public whose drinking behavior was known to be unaffected by previous antidrug advertising campaign. Found that advertisement reduced intake provided…

  7. Reducing greenhouse gas emissions through energy action

    Energy Technology Data Exchange (ETDEWEB)

    Castillo, X. [Schneider Electric (France)

    2010-07-01

    Greenhouse gas emissions have increased dramatically in recent years for a number of reasons and this is a cause of serious concern. This paper discusses how to reduce greenhouse gas emissions through energy action. It is important to save the planet from irreversible climate change. Energy efficiency (EE) should be the priority; cleaner fuels are necessary but EE is quick and cheap. Passive EE is not enough, active EE is needed and it is the only way to sustain real change. With energy action there are energy savings with ROI value, a structured methodology to identify areas of savings, prioritization of energy efficiency management plans, and increased awareness of energy consumption. Energy action is explained using the example of a mine and the results are given. The paper concludes that it is important to use existing technology to maximize efficient use of available energy in the interests of saving the planet.

  8. Electricity Demand and Energy Consumption Management System

    CERN Document Server

    Sarmiento, Juan Ojeda

    2008-01-01

    This project describes the electricity demand and energy consumption management system and its application to the Smelter Plant of Southern Peru. It is composted of an hourly demand-forecasting module and of a simulation component for a plant electrical system. The first module was done using dynamic neural networks, with backpropagation training algorithm; it is used to predict the electric power demanded every hour, with an error percentage below of 1%. This information allows management the peak demand before this happen, distributing the raise of electric load to other hours or improving those equipments that increase the demand. The simulation module is based in advanced estimation techniques, such as: parametric estimation, neural network modeling, statistic regression and previously developed models, which simulates the electric behavior of the smelter plant. These modules allow the proper planning because it allows knowing the behavior of the hourly demand and the consumption patterns of the plant, in...

  9. Limiting biomass consumption for heating in 100% renewable energy systems

    DEFF Research Database (Denmark)

    Mathiesen, Brian Vad; Lund, Henrik; Connolly, David

    2012-01-01

    The utilisation of biomass poses large challenges in renewable energy systems while buildings account for a substantial part of the energy supply even in 100% renewable energy systems. In this paper the focus is on how the heating sector can reduce its consumption of biomass, thus leaving biomass...... for other sectors, but while still enabling a 100% renewable energy system. The analyses of heating technologies shows that district heating (DH) systems are important in limiting the dependence on biomass and create cost effective solutions. DH systems are especially important in renewable energy systems...... with large amounts of fluctuating sources as it enables fuel efficient and low cost energy systems with thermal heat storages. DH increases the efficiency with the use of combined heat and power production (CHP), while reducing the biomass demand by enabling the use of other renewable resources such as large...

  10. Expand Energy Saving Space, Grasp the Opportunity to Reduce Consumption%拓展节能空间,把握降耗机会

    Institute of Scientific and Technical Information of China (English)

    吴铁明

    2015-01-01

    In response to the industrial energy saving targets and measures of "12th five-year plan", analysis of the present situation of energy management has been carried out in Shanghai Honggang Power Station Equipment Casting & Forging Co., Ltd. New solutions and measures have been put forward. Using GB/T 23331-2012 energy management system requirements as the guiding principle, through equipment modiifcation and renewal, establishment of equipment maintenance and maintenance mechanism, and optimization of evaluation and assessment mechanism of the equipment, so that the desired objectives of Honggang company's energy saving work can be achieved.%为了响应我国“十二五”工业节能目标及举措,上海宏钢电站设备铸锻有限公司对目前能源管理工作的现状进行分析,提出了新的解决办法和措施。以《GB/T 23331-2012能源管理体系要求》为指导方针,通过设备改造与更新、建立设备的维护与保养机制、优化设备的评价与考核机制,使宏钢公司的节能降耗工作达到预期的目标。

  11. How ERP (Enterprise-Resource-Planning) - systems reduce energy consumption during manufacturing; Wie ERP-Systeme in der Fertigung den Energieverbrauch reduzieren

    Energy Technology Data Exchange (ETDEWEB)

    Walz, Reinhold [Gewatec Systemloesungen GmbH, Wehingen (Germany); Ruesing, Eduard

    2011-05-30

    A precision manufacturer is presented, who utilize energy management for data of machine tools and operational data acquisition. The pilot center shuts down automatically the ventilation system for exhaust air of CNC-machines during nighttime and weekend. (orig./GL)

  12. Analysis on Effects of Industrial Structure on Energy Saving and Reducing Consumption in Jiangxi Province%江西产业结构对节能降耗影响的分析

    Institute of Scientific and Technical Information of China (English)

    章鹏; 何小敏; 谭玲

    2012-01-01

    节约降耗是贯彻落实科学发展观、构建和谐社会的重要举措,是建设“资源节约型、环境友好型”社会的必然选择。“十一五”期间,我省万元GDP能耗由2005年的1.057t标准煤降至2010年的0.845t标准煤,累计下降20.04%,圆满完成了“十一五”节能目标任务。尽管这一时期节能工作取得较大成效,但深层次的结构性矛盾并未得到解决,单位GDP能耗下降主要依靠工业能源利用效率的提高,产业结构变动不但没有产生任何节能效果,反而造成严重耗能。“十二五”时期我省节能目标为单位GDP能耗5a累计下降16%,全社会节能量应达到1793万t,较“十一五”增长8%,总体节能压力加大。据测算,仅简单复制“十一五”节能工作模式,不从深层次的产业结构调整人手,将难以实现“十二五”节能任务目标。因此,分析研究并努力解决节能降耗过程中存在的结构性问题,对于推动“十二五”单位GDP能耗持续下降具有非常重要的意义。%Energy saving and reducing consumption is an important measure to implement the scientific concept of development and build a harmonious society, is the inevitable choice to build a resource-saving and environment-friendly society. During the period of "Eleventh Five-year Plan", the province 10^4 yuan GDP energy consumption was dropped from 1.057 tons standard coal in 2005 to 0.845 tons standard coal in 2010, and total dropped 20.04%, put acorss the objectives and tasks of"Eleventh Five-year Plan". Although this period energy saving achieved greater results, but the deep-seated structural problems had not been resolved, the unit GDP energy consumption fell rely mainly on the advance of industrial energy efficiency, changes in industrial structure not only does not produce any nergy-saving effect, but serious energy consumption. "Twelfth Five-year Plan" period, energy

  13. Increased caffeine consumption is associated with reduced hepatic fibrosis

    National Research Council Canada - National Science Library

    Modi, Apurva A; Feld, Jordan J; Park, Yoon; Kleiner, David E; Everhart, James E; Liang, T. Jake; Hoofnagle, Jay H

    2010-01-01

    Although coffee consumption has been associated with reduced frequency of liver disease, it is unclear whether the effect is from coffee or caffeine and whether there is an effect on hepatic fibrosis specifically...

  14. An Analysis of Current Energy Consumption in China’s Agricultural Production

    Institute of Scientific and Technical Information of China (English)

    Xia; ZHANG; Zongshou; CAI; Lihong; CHEN; Dezheng; ZHANG; Zhe; ZHANG

    2015-01-01

    Energy consumption is one of the important symbols of modern agriculture,and it is also an important input in modern agricultural production. The study on the agricultural energy consumption not only has a positive significance to agricultural energy saving,emission reduction and ecological environment protection,but also can greatly reduce the cost of agricultural production and improve the economic benefit of farmers. Through the analysis of the national statistical data about energy consumption for agriculture production from 2005 to 2012 year,the results show that the amount of energy consumption for agricultural production in China has increased year by year since 2005. Because of the continued growth of the total energy consumption in China,the proportion of energy consumption for agricultural production to the total energy consumption of China has declined slightly since 2005. At present,the energy consumption structure for agricultural production in China is diesel fuel,coal,electric power,gasoline,and indirect energy consumption. With the rapid development of the agricultural technology in recent years,the total agricultural output value in China has increased greatly,the direct and indirect agricultural energy consumption per unit of agricultural output value in China has decreased year by year,and the efficiency of energy consumption for agricultural production has increased consequently.

  15. Energy consumption projection of Nepal: An econometric approach

    DEFF Research Database (Denmark)

    Parajuli, Ranjan; Østergaard, Poul A.; Dalgaard, Tommy

    2014-01-01

    In energy dependent economies, energy consumption is often linked with the growth in Gross Domestic Product (GDP). Energy intensity, defined herewith, as the ratio of the total primary energy consumption (TPE) to the GDP, is a useful concept for understanding the relation between energy demand...... and economic development. The scope of this article is to assess the future primary energy consumption of Nepal, and the projection is carried out along with the formulation of simple linear logarithmic energy consumption models. This initiates with a hypothesis that energy consumption is dependent...... with the national macro-economic parameters. To test the hypothesis, nexus between energy consumption and possible determinant variables are examined. Status of energy consumption between the period of 1996 and 2009, and for the same period, growth of economic parameters are assessed. Three scenarios are developed...

  16. Motivating sustainable energy consumption in the home

    Energy Technology Data Exchange (ETDEWEB)

    He, H.A.; Greenberg, S. [Calgary Univ., AB (Canada). Dept. of Computer Science

    2009-07-01

    This paper discussed social motivations related to household energy conservation. The aim of the study was to explore how technology can be designed and used in the home to encourage sustainable energy use. The basic techniques used to motivate sustainable energy action included behaviour change techniques; information techniques; positive motivational techniques; and coercive motivational techniques. The psychological theories used in the study included cognitive dissonance as a means of reminding people of the inconsistency of their attitudes towards energy and their behaviour, and utility theory as a means of determining personal motivations for energy conservation. The study showed that people are more motivated to act when presented with personalized information and monetary losses as opposed to monetary gain. Social value orientation and self-reflection motivations were also considered. The study showed that pro-social orientation can be used in the form of ambient displays located in public areas of the home. Self-reflection can be encouraged by allowing family members to annotate visualizations containing a history of their energy consumption data. Results of the study will be used to design actual feedback visualizations of energy use. 18 refs.

  17. Design of low-energy building and energy consumption analyses

    Institute of Scientific and Technical Information of China (English)

    刘鸣; 陈滨; 范悦; 朱佳音; 索健

    2009-01-01

    In China,a new "Design standard for energy efficiency of residential buildings (for cold region)" was introduced in 2006. In this new standard,more high level insulation of the building envelope is required,yearly energy requirement for heating must be less than 55 kWh/(m2·a)(regarded as a low-energy house). The new attempt was carried out in the process of architecture design with an evaluation on energy consumption of the building. The design plan was brought forward and compared. PHPP software from German was applied to calculate energy consumption of the passive residential building. The optimum design planning was discussed and model of passive house suited to China’s national conditions were attempted. The compactness,solar air collector and the window-wall ratio have essential influence on the energy consumption of buildings. The annual heat demands for the buildings with the window-wall ratio 0.35 and 0.50 are 48 kWh/(m2·a) and 46 kWh/(m2·a),respectively. The yearly auxiliary heat of building with the wall-mounted solar air collectors and the window-wall ratio 0.35 is just 4.8 kWh/(m2·a).

  18. Energy consumption model over parallel programs implemented on multicore architectures

    Directory of Open Access Journals (Sweden)

    Ricardo Isidro-Ramirez

    2015-06-01

    Full Text Available In High Performance Computing, energy consump-tion is becoming an important aspect to consider. Due to the high costs that represent energy production in all countries it holds an important role and it seek to find ways to save energy. It is reflected in some efforts to reduce the energy requirements of hardware components and applications. Some options have been appearing in order to scale down energy use and, con-sequently, scale up energy efficiency. One of these strategies is the multithread programming paradigm, whose purpose is to produce parallel programs able to use the full amount of computing resources available in a microprocessor. That energy saving strategy focuses on efficient use of multicore processors that are found in various computing devices, like mobile devices. Actually, as a growing trend, multicore processors are found as part of various specific purpose computers since 2003, from High Performance Computing servers to mobile devices. However, it is not clear how multiprogramming affects energy efficiency. This paper presents an analysis of different types of multicore-based architectures used in computing, and then a valid model is presented. Based on Amdahl’s Law, a model that considers different scenarios of energy use in multicore architectures it is proposed. Some interesting results were found from experiments with the developed algorithm, that it was execute of a parallel and sequential way. A lower limit of energy consumption was found in a type of multicore architecture and this behavior was observed experimentally.

  19. Energy consumption in air-conditioning; Improvement and Reduction

    Directory of Open Access Journals (Sweden)

    Yacoub Yousef Ahmad Alotaibi

    2015-06-01

    Full Text Available Anew technique to reduce latent heat to improve energy consumption in air-conditioning is by using Desiccant . The aim of dehumidification process is to remove the water vapor from the processed air to liquid desiccants. Dehumidification is considered as a key feature of HVAC systems for thermal comfort. Chemical dehumidification is remove the water vapour from the air by transferring it towards a desiccant material (adsorption or absorption. Results illustrate that the application of liquid desiccant in air conditioning can improve indoor air quality, reduce energy consumption and bring environmentally friendly products, also. Lewis number increased rapidly with the increase of solution concentration Therefore liquid desiccant air conditioning systems are drawing more and more attention in recent years.

  20. Relationships between energy consumption and climate change in China

    Institute of Scientific and Technical Information of China (English)

    QIANHuaisui; YUANShunquan; SUNJiulin; LIZehui

    2004-01-01

    Energy consumption has an inevitable connection with economic level and climate. Based on selected data covering annual total energy consumption and its composition and that of all kinds of energy in 1953-1999, the annual residential energy consumption and the coal and electricity consumption in 1980-1999 in China, the acreage of crops under cultivation suffered from drought and flood annually and gross domestic product (GDP) in 1953-1999 in the whole country, and mean daily temperature data from 29 provincial meteorological stations in the whole country from 1970 to 1999, this paper divides energy consumption into socio-economic energy consumption and climatic energy consumption in the way of multinomial. Itchanges between the climate energy consumption andalso goes further into the relations and their changes between the climate energy consumptionenergy consumption and the economic level inand climate factor and between the socio-economic energy between the climate energy level in China with the method of statistical analysis. At present, there are obvious transitions in the changing relationships of the energy consumption to economy and climate, which comprises the transition of economic system from resource-intensive industry to technology-intensive industry and the transition of climatic driving factors of the energy consumption from driven by the disasters of drought and flood to driven by temperature.

  1. A Low Power Consumption Algorithm for Efficient Energy Consumption in ZigBee Motes.

    Science.gov (United States)

    Vaquerizo-Hdez, Daniel; Muñoz, Pablo; R-Moreno, María D; F Barrero, David

    2017-09-22

    Wireless Sensor Networks (WSNs) are becoming increasingly popular since they can gather information from different locations without wires. This advantage is exploited in applications such as robotic systems, telecare, domotic or smart cities, among others. To gain independence from the electricity grid, WSNs devices are equipped with batteries, therefore their operational time is determined by the time that the batteries can power on the device. As a consequence, engineers must consider low energy consumption as a critical objective to design WSNs. Several approaches can be taken to make efficient use of energy in WSNs, for instance low-duty-cycling sensor networks (LDC-WSN). Based on the LDC-WSNs, we present LOKA, a LOw power Konsumption Algorithm to minimize WSNs energy consumption using different power modes in a sensor mote. The contribution of the work is a novel algorithm called LOKA that implements two duty-cycling mechanisms using the end-device of the ZigBee protocol (of the Application Support Sublayer) and an external microcontroller (Cortex M0+) in order to minimize the energy consumption of a delay tolerant networking. Experiments show that using LOKA, the energy required by the sensor device is reduced to half with respect to the same sensor device without using LOKA.

  2. The use of electro-deoxidation in molten salts to reduce the energy consumption of solar grade silicon and increase the output of PV solar cells

    Directory of Open Access Journals (Sweden)

    Paul R. Coxon

    2015-12-01

    Full Text Available Solar photovoltaics, based upon silicon, are the most popular form of solar cell with efficiencies around 20%. These efficiencies can be further increased by employing light trapping schemes to minimise optical losses through scattering and reflection which enhances the amount of light absorbed and number of photo-carriers generated. Typical approaches employ antireflection coatings (ARCs or texturise the surface of the silicon disks, so that the structure consists of an array of needles which can absorb most of the light. Usually, these structures are created by leaching the silicon with hydrofluoric-based acids or by reactive ion etching (RIE methods. This paper reviews some of the methods for improving the energy efficiency of silicon production, and describes the use of electro-deoxidation of SiO2 layers, on silicon, in molten calcium chloride to form nano-porous black silicon (b-Si structures. By coating b-Si surface with TiO2, a common ARC, extremely black surfaces with negligible reflectance of about 0.1%, are produced, which can have applications for low-cost high efficiency solar cells.

  3. Energy conservation by reducing process variability

    Energy Technology Data Exchange (ETDEWEB)

    Wising, Ulrika; Lafourcade, Sebastien [Pepite S.A., Liege (Belgium); Mack, Philippe [Pepite Technologies Inc., Montreal (Canada)

    2011-12-21

    Energy conservation is becoming an increasingly important instrument to stay competitive in today is increasingly global market. Important investments have been made in infrastructure and personnel in order to improve the management of energy such as increased metering, energy dashboards, energy managers, etc. Despite these investments, the results have not materialized and there is still a significant potential to further reduce energy consumption. In this paper a new methodology will be presented that helps industry better operate existing assets in order to reduce energy consumption, without having to make capital investments. The methodology uses a combination of advanced data analysis tools and a specific implementation scheme that has lead to significant savings in industry. The advanced data analysis tools are used to analyze the variability of the process in order to assess when the plant has been operated well or not so well in the past. By finding the root causes of these variations and the key variables that can explain them, improved operating guidelines and models can be developed and implemented. The specific implementation scheme is an important part of the methodology as it involves the people operating the plant. Several user cases will be presented showing an energy conservation of between 10%-20% without capital investments necessary. (author)

  4. Brand switching or reduced consumption? A study of how cigarette taxes affect tobacco consumption.

    Science.gov (United States)

    Chen, Chiang-Ming; Chang, Kuo-Liang; Lin, Lin; Lee, Jwo-Leun

    2014-12-01

    We examined the influence of cigarette taxes on tobacco consumption, with an emphasis on smokers' choice between reducing cigarette consumption and switching brands. We constructed three scenario-based models to study the following two subjects: (1) the relationship between deciding whether to reduce one's cigarette consumption and to practice brand switching (simultaneous or sequential); (2) the key determinants that affect smokers' decisions in terms of their consumption and brand switching when facing higher taxes. We applied data collected from a survey in Taiwan, and the results indicated that both independent and two-stage decision-making models generated very similar conclusions. We also found that gender difference contributed to reduce cigarette consumption. In addition, this study indicated that high-income smokers were less likely to switch brands, whereas well-educated smokers were more likely to switch brands. Most importantly, we questioned the effectiveness of cigarette tax policy, as our results suggested that higher price did not necessarily reduce consumption. Indeed, data indicated that consumption after the tax on cigarettes increased.

  5. Energy consumption in residential building: The effect of appliances and human behaviour

    Science.gov (United States)

    Rahman, K. A.; Hariri, Azian; Leman, A. M.; Yusof, M. Z. M.; Najib, M. N. M.

    2017-04-01

    Electricity is the predominant energy source used in these buildings. Therefore, energy management in residential buildings requires serious attention to ensure the energy consumption in residential building have been managed properly. Currently, the unstable of fuel price give the big impact to electricity price. Due to the issue, consumers require to use electricity more wisely. Using energy efficiently is one of the solution to reduce energy consumption. This paper aims to propose an initiative strategy for energy management system based on an analysis of energy consumption in residential building. The level of energy consumption among the occupants was found by obtaining electricity bills and distributing a questionnaire. A case study was carried out in selected areas in the Southern Zone of Peninsular Malaysia. The results of the study show that energy consumption was significant increased by month and the EEES as one of energy management system was suggested.

  6. Understanding change and continuity in residential energy consumption

    DEFF Research Database (Denmark)

    Gram-Hanssen, Kirsten

    2011-01-01

    of material consumer goods in practice theory. Case studies on household energy consumption are used as an empirical basis for these discussions. Looking at household energy consumption through the theoretical lens of practice theory necessitates discussion on whether energy consumption should be viewed......Practice theory has recently emerged within consumer studies as a promising approach that shifts focus from the individual consumer towards the collective aspects of consumption and from spectacular and conspicuous dimensions of consumption towards routine and mundane aspects of consumption...

  7. Reducing Total Power Consumption Method in Cloud Computing Environments

    CERN Document Server

    Kuribayashi, Shin-ichi

    2012-01-01

    The widespread use of cloud computing services is expected to increase the power consumed by ICT equipment in cloud computing environments rapidly. This paper first identifies the need of the collaboration among servers, the communication network and the power network, in order to reduce the total power consumption by the entire ICT equipment in cloud computing environments. Five fundamental policies for the collaboration are proposed and the algorithm to realize each collaboration policy is outlined. Next, this paper proposes possible signaling sequences to exchange information on power consumption between network and servers, in order to realize the proposed collaboration policy. Then, in order to reduce the power consumption by the network, this paper proposes a method of estimating the volume of power consumption by all network devices simply and assigning it to an individual user.

  8. A Framework for Simplified Residential Energy Consumption Assessment towards Developing Performance Prediction Models for Retrofit Decision-Making

    OpenAIRE

    Durak, Tolga

    2011-01-01

    This research proposes to simplify the energy consumption assessment for residential homes while building the foundation towards the development of prediction tools that can achieve a credible level of accuracy for confident decision making. The energy consumption assessment is based on simplified energy consumption models. The energy consumption analysis uses a reduced number of energy model equations utilizing a critical, limited set of parameters. The results of the analysis are used to de...

  9. Car taxes and energy consumption. Impact on energy consumption from tax reductions on passenger cars; Bilafgifter og energiforbrug. Energimaessige effekter af afgiftslempelser for personbiler

    Energy Technology Data Exchange (ETDEWEB)

    Wedebye, H.; Engelund, P.; Gravesen, R.; Vestergaard, L. (Tetraplan A/S (DK))

    2008-03-15

    The report describes results from the project 'Impact on energy consumption from tax reductions on specific types of passenger cars. The aim of the project is to evaluate the possibilities for reducing energy consumption, and hereby the CO2 emissions, for transport through differentiated purchase tax on passenger cars. Two schemes have been studied, which respectively favour energy efficient cars and passenger cars converted into vans. The study includes interviews, a questionnaire and analyses of register data. (BA)

  10. Electric energy consumption in the cotton textile processing stages

    Energy Technology Data Exchange (ETDEWEB)

    Palamutcu, S. [Textile Engineering Department, Pamukkale University, Engineering Faculty, 20070 Kinikli, Denizli (Turkey)

    2010-07-15

    Electric energy is one of the primary energy sources consumpted in cotton textile processing. Current energy cost rate is reported about 8-10% in the total production cost of an ordinary textile product manufactured in Turkey. Significantly important share of this energy cost is electric energy. The aim of this paper was to investigate unit electric energy consumption of cotton textile processing stages using real-time measurements method. Actual and estimated Specific Energy Consumption (SEC) values for electric energy was calculated in the cotton textile processing stages of spinning, warping-sizing, weaving, wet processing and clothing manufacturing. Actual electric energy consumption data are gathered from monthly records of the involved plant managements. Estimated electric energy consumption data is gathered through on-site measurement. Actual and estimated electric energy consumption data and monthly production quantities of the corresponding months are used to facilitate specific electric energy consumption of the plants. It is found that actual electric energy consumption amount per unit textile product is higher than the estimated electric energy consumption amount per unit textile product of each involved textile processing stages. (author)

  11. Energy drink consumption and marketing in South Africa.

    Science.gov (United States)

    Stacey, Nicholas; van Walbeek, Corné; Maboshe, Mashekwa; Tugendhaft, Aviva; Hofman, Karen

    2017-05-17

    Energy drinks are a fast-growing class of beverage containing high levels of caffeine and sugar. Advertising and marketing have been key to their growth in South Africa. This paper documents trends in energy drink consumption and energy drink advertising, and examines the relationship between exposure to energy drink advertising and consumption. Logistic regressions were estimated of categories of energy drink consumption on individual characteristics, as well as exposure to energy drink advertising. Exposure to advertising is measured by reported viewing of channels high in energy drink advertising. Energy drink consumption in South Africa is higher among younger, wealthier males. Spending on energy drink advertising is mostly focused on television. Targeted channels include youth, sports and general interest channels. Viewers of channels targeted by energy drink advertisers have higher odds of any and moderate levels of energy drinks consumption. Copyright © 2017 Elsevier Inc. All rights reserved.

  12. Milking systems and milking robots. Insight in energy consumption; Melksystemen en melkrobots. Inzicht in energiegebruik

    Energy Technology Data Exchange (ETDEWEB)

    Wientjes, H.; Rougoor, C. [DLV Rundvee Advies, Uden (Netherlands)

    2012-03-15

    Insight is given in the energy consumption during milking and how much energy can be saved. The goal is to reduce greenhouse gas emissions, produce renewable energy and the minimization of energy consumption in the dairy industry [Dutch] Inzicht wordt gegeven in het energieverbruik bij de melkwinning en de vraag welke energiebesparing hierbij nog haalbaar is. Het doel is vermindering van de uitstoot van broeikasgassen, productie van duurzame energie en de minimalisatie van het energieverbruik in de melkveehouderij.

  13. Energy consumption and economic growth. A causality analysis for Greece

    Energy Technology Data Exchange (ETDEWEB)

    Tsani, Stela Z. [The University of Reading, Department of Economics, Henley Business School, PO Box 218, Reading, RG6 6AA (United Kingdom)

    2010-05-15

    This paper investigates the causal relationship between aggregated and disaggregated levels of energy consumption and economic growth for Greece for the period 1960-2006 through the application of a later development in the methodology of time series proposed by Toda and Yamamoto (1995). At aggregated levels of energy consumption empirical findings suggest the presence of a uni-directional causal relationship running from total energy consumption to real GDP. At disaggregated levels empirical evidence suggests that there is a bi-directional causal relationship between industrial and residential energy consumption to real GDP but this is not the case for the transport energy consumption with causal relationship being identified in neither direction. The importance of these findings lies on their policy implications and their adoption on structural policies affecting energy consumption in Greece suggesting that in order to address energy import dependence and environmental concerns without hindering economic growth emphasis should be put on the demand side and energy efficiency improvements. (author)

  14. Energy consumption and economic growth: A causality analysis for Greece

    Energy Technology Data Exchange (ETDEWEB)

    Tsani, Stela Z., E-mail: s.cani@reading.ac.u [University of Reading, Department of Economics, Henley Business School, PO Box 218, Reading, RG6 6AA (United Kingdom)

    2010-05-15

    This paper investigates the causal relationship between aggregated and disaggregated levels of energy consumption and economic growth for Greece for the period 1960-2006 through the application of a later development in the methodology of time series proposed by Toda and Yamamoto (1995). At aggregated levels of energy consumption empirical findings suggest the presence of a uni-directional causal relationship running from total energy consumption to real GDP. At disaggregated levels empirical evidence suggests that there is a bi-directional causal relationship between industrial and residential energy consumption to real GDP but this is not the case for the transport energy consumption with causal relationship being identified in neither direction. The importance of these findings lies on their policy implications and their adoption on structural policies affecting energy consumption in Greece suggesting that in order to address energy import dependence and environmental concerns without hindering economic growth emphasis should be put on the demand side and energy efficiency improvements.

  15. Impact of CBR Traffic on Energy Consumption in MANET

    Science.gov (United States)

    Kabbur Mr., Shridhar; Ahammed, G. F. Ali, Dr.; Banu, Rashma, Dr.

    2017-08-01

    Mobile Ad hoc networks (MANETs) are power constrained since nodes are operated with limited battery supply. If a battery of the node drains, its ability to forward the traffic gets affected results in reduced network lifetime. There has been considerable progress in the battery technology, but not in par with the semiconductor technology. There are various techniques adopt different approach to achieve energy efficiency. The proposed approach uses a cost metric for path selection, which is a function of residual battery and current traffic load at a node. The simulation has been carried out using QualNet simulator. The performance is based on average energy consumption for varying CBR applications.

  16. Low energy consumption spintronics using multiferroic heterostructures.

    Science.gov (United States)

    Trassin, Morgan

    2016-01-27

    We review the recent progress in the field of multiferroic magnetoelectric heterostructures. The lack of single phase multiferroic candidates exhibiting simultaneously strong and coupled magnetic and ferroelectric orders led to an increased effort into the development of artificial multiferroic heterostructures in which these orders are combined by assembling different materials. The magnetoelectric coupling emerging from the created interface between the ferroelectric and ferromagnetic layers can result in electrically tunable magnetic transition temperature, magnetic anisotropy or magnetization reversal. The full potential of low energy consumption magnetic based devices for spintronics lies in our understanding of the magnetoelectric coupling at the scale of the ferroic domains. Although the thin film synthesis progresses resulted into the complete control of ferroic domain ordering using epitaxial strain, the local observation of magnetoelectric coupling remains challenging. The ability to imprint ferroelectric domains into ferromagnets and to manipulate those solely using electric fields suggests new technological advances for spintronics such as magnetoelectric memories or memristors.

  17. Revising China's energy consumption and carbon emissions

    Science.gov (United States)

    Liu, Z.

    2015-12-01

    China is the world's largest carbon emitter and takes the lion's share of new increased emission since 2000, China's carbon emissions and mitigation efforts have received global attentions (Liu et al., Nature 500, 143-145)1. Yet China's emission estimates have been approved to be greatly uncertain (Guan et al., Nature Climate Change 2, 672-675)2. Accurate estimation becomes even crucial as China has recently pledged to reach a carbon emission peak by 2030, but no quantitative target has been given, nor is it even possible to assess without a reasonable baseline. Here we produced new estimates of Chinese carbon emissions for 1950-2012 based on a new investigation in energy consumption activities and emission factors using extensively surveyed and experimental data from 4243 mines and 602 coal samples. We reported that the total energy consumption is 10% higher than the nationally published value. The investigated emission factors used in China are significantly (40%) different from the IPCC default values which were used in drawing up several previous emission inventories. The final calculated total carbon emissions from China are 10% different than the amount reported by international data sets. The new estimate provides a revision of 4% of global emissions, which could have important implications for global carbon budgets and burden-sharing of climate change mitigation. 1 Liu, Z. et al. A low-carbon road map for China. Nature 500, 143-145 (2013). 2 Guan, D., Liu, Z., Geng, Y., Lindner, S. & Hubacek, K. The gigatonne gap in China's carbon dioxide inventories. Nature Climate Change, 672-675 (2012).

  18. Green smartphone GPUs: Optimizing energy consumption using GPUFreq scaling governors

    KAUST Repository

    Ahmad, Enas M.

    2015-10-19

    Modern smartphones are limited by their short battery life. The advancement of the graphical performance is considered as one of the main reasons behind the massive battery drainage in smartphones. In this paper we present a novel implementation of the GPUFreq Scaling Governors, a Dynamic Voltage and Frequency Scaling (DVFS) model implemented in the Android Linux kernel for dynamically scaling smartphone Graphical Processing Units (GPUs). The GPUFreq governors offer users multiple variations and alternatives in controlling the power consumption and performance of their GPUs. We implemented and evaluated our model on a smartphone GPU and measured the energy performance using an external power monitor. The results show that the energy consumption of smartphone GPUs can be significantly reduced with a minor effect on the GPU performance.

  19. 10 CFR 431.134 - Uniform test methods for the measurement of energy consumption and water consumption of automatic...

    Science.gov (United States)

    2010-01-01

    ... consumption and water consumption of automatic commercial ice makers. 431.134 Section 431.134 Energy... of energy consumption and water consumption of automatic commercial ice makers. (a) Scope. This... consumption, but instead calculate the energy use rate (kWh/100 lbs Ice) by dividing the energy consumed...

  20. Standby energy consumption in Ukraine. Making a case for households

    Energy Technology Data Exchange (ETDEWEB)

    Martsynkevych, Vladlena

    2008-07-01

    The current research is the first study of standby energy consumption in households in Ukraine. It provides insights to the scope of the problem and the opportunities to improve the situation. Standby power refers to power consumed by appliances when they are not performing their primary function and are switched ''off''. Measurements of 50 households were performed. Standby power was measured and a questionnaire was used to find out the behavioural patterns. The combined standby power use is about 23.4 W per household, resulting in national 1.3 TW h per year and 0.8% of the national electricity consumption respectively. The CO2 emissions from standby account for 0.1% of the emissions in Ukraine per year. Different scenarios show the possibilities to reduce standby consumption and CO2 emissions from 10% to 70% under different conditions. The main determinant of household electricity consumption is the number of appliances it has. Levels of standby power use are lower in Ukraine than in developed countries. However, the tendencies are such that the penetration level is growing, and, particularly, of new appliances with standby modes. It is pointed out that there is a need for national standards enforcement, raise of public awareness and price incentives for the reduction of standby power consumption. (orig.)

  1. Benchmarking of energy consumption of continuous galvanizing lines

    Science.gov (United States)

    Gopalakrishnan, B.; Chavan, R.

    2005-11-01

    A case study revealed that more than 13,500 MMBtu of energy is wasted annually when a single galvanizing line is off-production for hardware replacement for duration of a few hours every 2 weeks. This energy if utilized for production will yield about 13,000 tons of Galvanized Sheet Steel annually from a single galvanizing line. Thus for the 57 [1] hot dip galvanizing lines in US this figure results in a production loss of 741,000 tons/year. An attempt has been made to develop a spreadsheet that will take into account all the major energy consuming equipment in a typical hot dip continuous line. It maintains a track of the current production and energy consumption. It can simulate a scenario where either the number of shutdowns or the hours per shutdown will be reduced as a consequence of better material developed by the researchers. Different charts pertaining to energy consumed by different equipment group, total cost of energy spent on natural gas and electricity, MMBtu/Ton, Tons/Year and Production time before shutdowns assists the engineers decide the best operating stretch to suite their production rate and optimize energy consumption to some extent. Validation data gathered from the three well established galvanizing lines powers this spreadsheet to forecast annual increase in production and thus helps judge the performance of the new hardware.

  2. Sustainable energy consumption and production - a global view

    Energy Technology Data Exchange (ETDEWEB)

    Hernes, H.

    1995-12-31

    The paper gives a global view of sustainable energy consumption and production both in developed and developing countries. There is a need of replacing fossil fuel sources with renewable energy at a speed parallel to the depletion of the oil and gas sources. According to the author, the actual growth in developing countries` use of oil, coal and other sources of energy has almost tripled since 1970. Future population growth alone will spur a further 70% jump in energy use in 30 years, even if per capita consumption remains at current levels. For the OECD countries, energy use rose one fifth as much as economic growth between 1973 and 1989. Countries like China and India, and other developing countries, have huge coal reserves and energy needs. Policy makers have to integrate environmental concerns in decision making over the choice between different fuels, energy technologies and stricter environmental standards. Life cycle analyses can contribute to the development of overall indicators of environmental performance of different technologies. According to the IPCC (Intergovernmental Panel on Climate Change), anthropogenic CO{sub 2} emissions must be reduced by more than 60% in order to stabilize the CO{sub 2} concentration in the atmosphere. 8 refs.

  3. Energy consumption in the production of cellulose and paper

    Energy Technology Data Exchange (ETDEWEB)

    Kubelka, V.

    1979-01-01

    The specific consumption of energy in the cellulose and paper industry of Czechoslovakia is 20% higher than in Austria and the Federal Republic of Germany. For the last 20 years, the specific consumption of fuel decreased by 29% in the Austrian cellulose and paper industry, while the consumption of electricity increased by 16%. The possibility for decreasing the specific consumption of energy in Czechoslovakia by burning by-products, heat recovery, equipment modernization, etc. are examined.

  4. Energy efficiency in a water supply system: Energy consumption and CO2 emission

    Directory of Open Access Journals (Sweden)

    Helena M. RAMOS

    2010-09-01

    Full Text Available This paper presents important fundaments associated to the water/energy consumption and enhances the importance of renewable energy sources. A model of multi-criterion optimization for energy efficiency based on water and environment management policy, the preservation of the water resources, the control of water pressure and energy consumption, through a hybrid energy solution is developed and applied to a water supply system. The methodology developed includes three solutions: (i water turbine installation in pipes where there is a need to control the pressure by pressure reducing valves, (ii the optimization of pumping operations according to the electricity tariff and the water demand and (iii the addition of a renewable energy source, a wind turbine, to supply energy to the pump-station and to sell the remaining to the national grid. The use of an integrated solution (water/energy shows to be a valuable input to benefit from available hydro energy in WSS to produce clean power and the use of wind source allows reducing the energy consumption in pump-stations, which is still mostly based on fossil fuels with high levels of CO2 emissions.

  5. Uncertainty of Energy Consumption Assessment of Domestic Buildings

    DEFF Research Database (Denmark)

    Brohus, Henrik; Heiselberg, Per; Simonsen, A.

    2009-01-01

    In order to assess the influence of energy reduction initiatives, to determine the expected annual cost, to calculate life cycle cost, emission impact, etc. it is crucial to be able to assess the energy consumption reasonably accurate. The present work undertakes a theoretical and empirical study...... of the uncertainty of energy consumption assessment of domestic buildings. The calculated energy consumption of a number of almost identical domestic buildings in Denmark is compared with the measured energy consumption. Furthermore, the uncertainty is determined by means of stochastic modelling based on input...

  6. Energy consumption renewable energy development and environmental impact in Algeria - Trend for 2030

    Science.gov (United States)

    Sahnoune, F.; Imessad, K.; Bouakaz, D. M.

    2017-02-01

    The study provides a detailed analysis of the energy production and consumption in Algeria and the associated CO2 emissions. Algeria is an important energy producer (oil and natural gas). The production is currently around 155 MToe. The total primary energy consumption amounted to about 58 MToe equivalent to 1.46 Toe/capita. The energy demand is still increasing, an average annual growth rate of more than 6% per year during the last decade. The growth rate for electricity production was almost twice that of the total energy consumption. In 2015, the installed capacity of the electricity generation plants reached 17.6 GW. Electricity consumption was 64.6 TWh and is expected to reach at least 75 TWh in 2020 and 130 TWh in 2030. The already high electricity demand will double by 2030. In the structure of final energy consumption, the transport sector ranks first (36%), natural gas consumption ranks second (28.5%), followed by electricity production (27.7%). By activity, the energy sector is the main source of CO2 emissions, about ¾ of the total and this sector has the most important potential for mitigation measures. CO2 emissions from this energy sector amounted to 112.2 MT CO2 as follows: 33% transport, 31% electricity production and 26% from natural gas combustion for residential use. The integration of renewable sources in the energy mix represents for Algeria a major challenge. In 2015, Algeria adopted an ambitious program for development of renewable energy. The target is to achieve 22 GW capacity of electricity from renewable by 2030 to reach a rate of 27 % of national electricity generation through renewable sources. By implementing this program, CO2 emissions of power generation will be reduced by more than 18% in 2030.

  7. Increased caffeine consumption is associated with reduced hepatic fibrosis.

    Science.gov (United States)

    Modi, Apurva A; Feld, Jordan J; Park, Yoon; Kleiner, David E; Everhart, James E; Liang, T Jake; Hoofnagle, Jay H

    2010-01-01

    Although coffee consumption has been associated with reduced frequency of liver disease, it is unclear whether the effect is from coffee or caffeine and whether there is an effect on hepatic fibrosis specifically. This study was undertaken to use a food-frequency instrument for dietary caffeine consumption to evaluate the relationship between caffeine intake and liver fibrosis. Patients undergoing liver biopsy completed a detailed caffeine questionnaire on three occasions over a 6-month period. Caffeine intake was compared between patients with mild and advanced liver fibrosis (bridging fibrosis/cirrhosis). Logistic regression was used to evaluate the association between caffeine consumption and hepatic fibrosis. One hundred seventy-seven patients (99 male, 104 white, 121 with chronic hepatitis C virus [HCV] infection) undergoing liver biopsy completed the caffeine questionnaire on up to three occasions. Results from repeated questionnaires were consistent. Daily caffeine consumption above the 75(th) percentile for the cohort (308 mg = approximately 2.25 cups of coffee equivalents) was associated with reduced liver fibrosis (odds ratio [OR], 0.33; 95% confidence interval [CI], 0.14-0.80; P = 0.015) and the protective association persisted after controlling for age, sex, race, liver disease, body mass index, and alcohol intake in all patients (OR, 0.25; 95% CI, 0.09-0.67; P = 0.006), as well as the subset with HCV infection (OR, 0.19; 95% CI, 0.05-0.66; P = 0.009). Despite a modest trend, consumption of caffeine from sources other than coffee or of decaffeinated coffee was not associated with reduced liver fibrosis. A reliable tool for measurement of caffeine consumption demonstrated that caffeine consumption, particularly from regular coffee, above a threshold of approximately 2 coffee-cup equivalents per day, was associated with less severe hepatic fibrosis.

  8. Increased caffeine consumption is associated with reduced hepatic fibrosis

    Science.gov (United States)

    Modi, Apurva A; Feld, Jordan J; Park, Yoon; Kleiner, David E; Everhart, James E.; Liang, T. Jake; Hoofnagle, Jay H.

    2009-01-01

    Background Although coffee consumption has been associated with reduced frequency of liver disease, it is unclear whether the effect is from coffee or caffeine and whether there is an effect on hepatic fibrosis specifically. Aim To use a food-frequency instrument for dietary caffeine consumption to evaluate the relationship between caffeine intake and liver fibrosis. Methods Patients undergoing liver biopsy completed a detailed caffeine questionnaire on 3 occasions over a 6-month period. Caffeine intake was compared between patients with mild and advanced liver fibrosis (bridging fibrosis/cirrhosis). Logistic regression was used to evaluate the association between caffeine consumption and hepatic fibrosis. Results 177 patients (99 male, 104 Caucasian, 121 with chronic hepatitis C virus [HCV] infection) undergoing liver biopsy completed the caffeine questionnaire on up to three occasions. Results from repeated questionnaires were consistent. Daily caffeine consumption above the 75th percentile for the cohort (308 mg ~2.25 cups of coffee equivalents) was associated with reduced liver fibrosis (OR 0.33, 95% CI: 0.14-0.80, p=0.015) and the protective association persisted after controlling for age, sex, race, liver disease, body mass index and alcohol intake in all patients (OR 0.25, 95% CI: 0.09-0.67, p=0.006), as well as the subset with HCV infection (OR 0.19, 95% CI: 0.05-0.66, p=0.009). Despite a modest trend, consumption of caffeine from sources other than coffee or of decaffeinated coffee was not associated with reduced liver fibrosis. Conclusion A reliable tool for measurement of caffeine consumption demonstrated that caffeine consumption, particularly from regular coffee, above a threshold of approximately 2 coffee-cup equivalents per day, was associated with less severe hepatic fibrosis. PMID:20034049

  9. Energy consumption of personal computer workstations

    Energy Technology Data Exchange (ETDEWEB)

    Szydlowski, R.F.; Chvala, W.D. Jr.

    1994-02-01

    The explosive growth of the information age has had a profound effect on the appearance of today`s office. Although the telephone still remains an important part of the information exchange and processing system within an office, other electronic devices are now considered required equipment within this environment. This office automation equipment includes facsimile machines, photocopiers, personal computers, printers, modems, and other peripherals. A recent estimate of the installed base indicated that 42 million personal computers and 7.3 million printers are in place, consuming 18.2 billion kWh/yr-and this installed base is growing (Luhn 1992). From a productivity standpoint, it can be argued that this equipment greatly improves the efficiency of those working in the office. But of primary concern to energy system designers, building managers, and electric utilities is the fact that this equipment requires electric energy. Although the impact of each incremental piece of equipment is small, installation of thousands of devices per building has resulted in office automation equipment becoming the major contributor to electric consumption and demand growth in commercial buildings. Personal computers and associated equipment are the dominant part of office automation equipment. In some cases, this electric demand growth has caused office buildings electric and cooling systems to overload.

  10. Energy Consumption Analysis Based on Energy Efficiency Approach: A Case of Suburban Area

    Directory of Open Access Journals (Sweden)

    Rahman K.A

    2017-01-01

    Full Text Available Sufficient data about electricity consumption over large periods of time was accumulated and analysed in order to develop appropriate electricity-saving measures. An important first step was to analyse and identify electrical appliances that had energy saving potential. Different behavioural consumption profiles were analysed using information from two sources: 1 technical data about electricity consumption (electricity bill and 2 data about household electrical appliance usage and consumer awareness obtained from a questionnaire survey. The questionnaire consisted of four sections of questions which concerned residents’ backgrounds, residential information, consumers’ awareness about energy efficiency (EE and the energy usage of each house. The results showed that the electricity consumption profile of an individual household could be most related to the EE approach. It indicated that consumers’ behaviour (awareness and practice resulted in one of the important factors related to high electricity consumption. Another important conclusion of our questionnaire-based analysis was that the implementation of the EE approach could help the consumer to reduce their monthly energy consumption.

  11. EVALUATION OF ENERGY CONSUMPTION IN DAIRY WWTP BIELMLEK BIELSK PODLASKI

    Directory of Open Access Journals (Sweden)

    Wojciech Dąbrowski

    2015-07-01

    Full Text Available Apart from highly efficient treatment of dairy wastewater, a low energy consumption is required in order to lower its costs. During the research period, parameters of raw and treated sewage were tested (BOD, COD, Ntotal, Ptotal. Also, the energy consumption from selected processes as well as the total consumption were measured. It was observed that about 40,5% of energy was used for aeration in SBR chambers, 14,6% for dissolved air flotation and the rest for processes connected with mechanical treatment and sewage sludge treatment. First, all the sources of energy consumption and their power were analysed. Indicators of energy consumption and removed load were calculated. The conducted research will be continued in order to optimize energy consumption while retaining high efficiency of treatment. A mathematical model will be prepared after data collecting. It can be universally applied in different WWTPs, not only dairy ones.

  12. uFLIP: Understanding the Energy Consumption of Flash Devices

    DEFF Research Database (Denmark)

    Bjørling, Matias; Bonnet, Philippe; Bouganim, Luc

    2010-01-01

    Understanding the energy consumption of flash devices is important for two reasons. First, energy is emerging as a key metric for data management systems. It is thus important to understand how we can reason about the energy consumption of flash devices beyond their approximate aggregate...... consumption (low power consumption in idle mode, average Watt consumption from the data sheets). Second, when measured at a sufficiently fine granularity, the energy consumption of a given device might complement the performance characteristics derived from its response time profile. Indeed, background work...... which is not directly observable with a response time profile appears clearly when energy is used as a metric. In this paper, we discuss the results from the {uFLIP} benchmark applied to four different {SSD} devices using both response time and energy as metric....

  13. uFLIP: Understanding the Energy Consumption of Flash Devices

    DEFF Research Database (Denmark)

    Bjørling, Matias; Bonnet, Philippe; Bouganim, Luc

    2010-01-01

    Understanding the energy consumption of flash devices is important for two reasons. First, energy is emerging as a key metric for data management systems. It is thus important to understand how we can reason about the energy consumption of flash devices beyond their approximate aggregate...... consumption (low power consumption in idle mode, average Watt consumption from the data sheets). Second, when measured at a sufficiently fine granularity, the energy consumption of a given device might complement the performance characteristics derived from its response time profile. Indeed, background work...... which is not directly observable with a response time profile appears clearly when energy is used as a metric. In this paper, we discuss the results from the {uFLIP} benchmark applied to four different {SSD} devices using both response time and energy as metric....

  14. Comparison and Evolution of Energy Consumption in Moroccan Agro-food Industries

    Science.gov (United States)

    El Badaoui, Meryem; Touzani, Abdellatif

    2017-06-01

    The aim of this article is to establish a comparison between the Moroccan energy consumption and the BREF the reference document on best available techniques in the food industries, then an evolution of this consumption by 2030 in order to better understand it and to define strategies to reduce energy bill. According to a survey conducted among 5000 Moroccan companies, we were able to compare the energy consumption of the agro-food industries including sugar industry, dairy industry, cereal industry; fatty substances industry and fishing industry with that of the BREF. Also an evolution of Moroccan consumption was established by 2030 using the linear regression method, and then calculated a non-negligible average annual growth rate (AAGR). The results show that the Moroccan energy consumption is adequate to that of the BREF, and an energy consumption constantly increasing by registering a non-negligible AAGR.

  15. Field Study on the Energy Consumption of School Buildings in Luxembourg

    OpenAIRE

    Thewes, Andreas; Maas, Stefan; Scholzen, Frank; Waldmann, Danièle; Zürbes, Arno

    2014-01-01

    Buildings account for 40 % of total energy consumption and 35 % of the total CO2 emitted in the EU. In consequence, there is an enormous energy saving potential and the European Union requires from all EU member states to save energy in this sector. Hence, reducing the energy consumption of buildings represents an essential component of environmental protection efforts. Furthermore, the new European directive 2010/31/EU requires that the member states tighten national standards and draw up na...

  16. Low-Energy Astrophysics: Stimulating the Reduction of Energy Consumption in the Next Decade

    CERN Document Server

    Marshall, P J; Rykoff, E S; Shen, K J; Steinfadt, J D R; Fregeau, J; Chary, R-R; Sheth, K; Weiner, B; Henisey, K B; Quetin, E L; Antonucci, R; Kaplan, D; Jonsson, P; Auger, M W; Cardamone, C; Tao, T; Holz, D E; Bradac, M; Metcalfe, T S; McHugh, S; Elvis, M; Brewer, B J; Urrutia, T; Guo, F; Hovest, W; Nakajima, R; For, B -Q; Erb, D; Paneque, D

    2009-01-01

    In this paper we address the consumption of energy by astronomers while performing their professional duties. Although we find that astronomy uses a negligible fraction of the US energy budget, the rate at which energy is consumed by an average astronomer is similar to that of a typical high-flying businessperson. We review some of the ways in which astronomers are already acting to reduce their energy consumption. In the coming decades, all citizens will have to reduce their energy consumption to conserve fossil fuel reserves and to help avert a potentially catastrophic change in the Earth's climate. The challenges are the same for astronomers as they are for everyone: decreasing the distances we travel and investing in energy-efficient infrastructure. The high profile of astronomy in the media, and the great public interest in our field, can play a role in promoting energy-awareness to the wider population. Our specific recommendations are therefore to 1) reduce travel when possible, through efficient meeti...

  17. Energy consumption in commercial buildings: A comparison with BEPS budgets

    Science.gov (United States)

    1980-09-01

    Metered energy consumption data were collected on existing commercial buildings to help establish the proposed building energy performance standards (BEPS). The search has identified 84 buildings whose metered energy consumption is equal to or less than that proposed for their BEPS budgets and another 7 buildings whose metered consumption is less than 20 percent above their BEPS budgets. The methodology used to identify the buildings and to collect their metered energy consumption data are described. The data are analyzed and summarized and conclusions are drawn.

  18. Energy consumption program: A computer model simulating energy loads in buildings

    Science.gov (United States)

    Stoller, F. W.; Lansing, F. L.; Chai, V. W.; Higgins, S.

    1978-01-01

    The JPL energy consumption computer program developed as a useful tool in the on-going building modification studies in the DSN energy conservation project is described. The program simulates building heating and cooling loads and computes thermal and electric energy consumption and cost. The accuracy of computations are not sacrificed, however, since the results lie within + or - 10 percent margin compared to those read from energy meters. The program is carefully structured to reduce both user's time and running cost by asking minimum information from the user and reducing many internal time-consuming computational loops. Many unique features were added to handle two-level electronics control rooms not found in any other program.

  19. Energy consumption program: A computer model simulating energy loads in buildings

    Science.gov (United States)

    Stoller, F. W.; Lansing, F. L.; Chai, V. W.; Higgins, S.

    1978-01-01

    The JPL energy consumption computer program developed as a useful tool in the on-going building modification studies in the DSN energy conservation project is described. The program simulates building heating and cooling loads and computes thermal and electric energy consumption and cost. The accuracy of computations are not sacrificed, however, since the results lie within + or - 10 percent margin compared to those read from energy meters. The program is carefully structured to reduce both user's time and running cost by asking minimum information from the user and reducing many internal time-consuming computational loops. Many unique features were added to handle two-level electronics control rooms not found in any other program.

  20. Habit formation and consumption of energy for heating

    DEFF Research Database (Denmark)

    Leth-Petersen, Søren

    2007-01-01

    In this paper we ask if consumption of energy for space heating by households is habit forming. A model of intertemporal consumption allocation allowing for habit-forming preferences is estimated on a register-based panel data set with high quality information about consumption of natural gas...

  1. Analysis of Final Energy Consumption Patterns in 10 Arab Countries

    Science.gov (United States)

    Al-Hinti, I.; Al-Ghandoor, A.

    2009-08-01

    This study presents an analysis of the energy consumption patterns in 10 Arab countries: Saudi Arabia, Kuwait, United Arab Emirates (UAE), Syria, Lebanon, Jordan, Egypt, Libya, Tunisia, and Algeria. Commonalities and variations between these countries are discussed and explained through key economic and energy indicators, and the relationship between the overall final energy consumption per capita and the GDP per capita is examined. The distribution of the final energy consumption across different sectors is also analysed, and the patterns of consumption in the industrial, transportation, and residential sectors are discussed with focus on the types of energy consumed, and the main drivers of this consumption. The findings and the conclusions of this study are believed to be beneficial to the national energy policy planners in identifying possible strengths, weaknesses, and areas of emphasis and improvement in their strategic energy plans.

  2. Study of the Effects on Student Knowledge and Perceptions of Activities Related to Submetering the 6th Grade Wing of a Middle School, to Displaying the Carbon Footprint, and to Efforts to Reduce Energy Consumption and Greenhouse Gases

    Science.gov (United States)

    Peck, Rick

    2009-01-01

    The purpose of the study was to determine the effects upon student knowledge and perceptions regarding greenhouse gas emissions as a result of an intervention relying upon the submetering the 6th grade wing of a Middle School, displaying the information regarding electrical consumption and carbon footprint, and reducing the electrical consumption…

  3. Fish oil reduces heart rate and oxygen consumption during exercise.

    Science.gov (United States)

    Peoples, Gregory E; McLennan, Peter L; Howe, Peter R C; Groeller, Herbert

    2008-12-01

    Dietary omega-3 polyunsaturated fatty acids (PUFAs) are readily incorporated into heart and skeletal muscle membranes where, in the heart, animal studies show they reduce O2 consumption. To test the hypothesis that omega-3 PUFAs alter O2 efficiency in humans, the effects of fish oil (FO) supplementation on O2 consumption during exercise were evaluated. Sixteen well-trained men (cyclists), randomly assigned to receive 8 x 1 g capsules per day of olive oil (control) or FO for 8 weeks in a double-blind, parallel design, completed the study (control: n = 7, age 27.1 +/- 2.7 years; FO: n = 9, age 23.2 +/- 1.2 years). Subjects used an electronically braked cycle ergometer to complete peak O2 consumption tests (VO 2peak) and sustained submaximal exercise tests at 55% of peak workload (from the VO 2peak test) before and after supplementation. Whole-body O2 consumption and indirect measurements of myocardial O2 consumption [heart rate and rate pressure product (RPP)] were assessed. FO supplementation increased omega-3 PUFA content of erythrocyte cell membranes. There were no differences in VO 2peak (mL kg(-1) min(-1)) (control: pre 66.8 +/- 2.4, post 67.2 +/- 2.3; FO: pre 68.3 +/- 1.4, post 67.2 +/- 1.2) or peak workload after supplementation. The FO supplementation lowered heart rate (including peak heart rate) during incremental workloads to exhaustion (P exercise heart rate, whole-body O2 consumption, and RPP (P heart and skeletal muscle to reduce both whole-body and myocardial O2 demand during exercise, without a decrement in performance.

  4. Energy Consumption by Rural Households in Northern Hunan

    Institute of Scientific and Technical Information of China (English)

    LI Lin; ZHOU Jin; ZHANG Guo-qiang

    2009-01-01

    TKs study was conducted to investigate the household energy consumption in rural districts in northern Hunan and to help explore the sustainable and ecological energy policy.Questionnaires were used to ac-quire the details of energy consumption,and the electricity equivalent calculation was used in the energy statis-tics in four villages.The energy consumption in these four villages is influenced by the economic condition,geo-graphic position and landform and the local custom.The traditional biomass energy and coal briquette are the primary energy source for cooking and heating,but they are used in a very low efficiency and result in poorIAQ.For sustainability,further measures should be taken to optimize the energy consumption with the efficient use of biomass energy,coal and electricity.

  5. Forecast errors in IEA-countries' energy consumption

    DEFF Research Database (Denmark)

    Linderoth, Hans

    2002-01-01

    Every year Policy of IEA Countries includes a forecast of the energy consumption in the member countries. Forecasts concerning the years 1985,1990 and 1995 can now be compared to actual values. The second oil crisis resulted in big positive forecast errors. The oil price drop in 1986 did not have...... a similar opposite effect. A correction for economic growth reduces forecast errors during the second oil crisis but not elsewhere. Industry has a relatively big positive error while transportation has a negative forecast error. Even when the forecast error is small, the results are not so "nice" because...

  6. Energy consumption in the Danish fishery

    DEFF Research Database (Denmark)

    Thrane, Mikkel

    2004-01-01

    Previous studies based on life-cycle assessment (LCA) in Denmark and Sweden have shown that the fishery is the environmental "hot spot" in the life cycle of certain fish products. Within the fishery, fuel consumption is one of the most important factors addressed by LCA. The present study reveals...... that there are great differences in fuel consumption between fisheries targeting groundfish or shellfish and those targeting pelagic fish or industrial fish. Here, I show that fuel consumption per kilogram of caught fish varies considerably as a function of fishing gear and vessel size, even considering the same......) in Denmark and Sweden have shown that the fishery is the environmental "hot spot" in the life cycle of certain fish products. Within the fishery, fuel consumption is one of the most important factors addressed by LCA. The present study reveals that there are great differences in fuel consumption between...

  7. CO{sub 2} emissions, energy consumption and economic growth in China: A panel data analysis

    Energy Technology Data Exchange (ETDEWEB)

    Wang, S.S.; Zhou, D.Q. [College of Economics and Management, Nanjing University of Aeronautics and Astronautics, Nanjing 210016 (China); Research Centre for Soft Energy Science, Nanjing University of Aeronautics and Astronautics, Nanjing 210016 (China); Zhou, P., E-mail: cemzp@nuaa.edu.cn [College of Economics and Management, Nanjing University of Aeronautics and Astronautics, Nanjing 210016 (China); Research Centre for Soft Energy Science, Nanjing University of Aeronautics and Astronautics, Nanjing 210016 (China); Wang, Q.W. [Research Centre for Soft Energy Science, Nanjing University of Aeronautics and Astronautics, Nanjing 210016 (China); School of Business, Soochow University, 50 Donghuan Road, Suzhou 215021 (China)

    2011-09-15

    This paper examines the causal relationships between carbon dioxide emissions, energy consumption and real economic output using panel cointegration and panel vector error correction modeling techniques based on the panel data for 28 provinces in China over the period 1995-2007. Our empirical results show that CO{sub 2} emissions, energy consumption and economic growth have appeared to be cointegrated. Moreover, there exists bidirectional causality between CO{sub 2} emissions and energy consumption, and also between energy consumption and economic growth. It has also been found that energy consumption and economic growth are the long-run causes for CO{sub 2} emissions and CO{sub 2} emissions and economic growth are the long-run causes for energy consumption. The results indicate that China's CO{sub 2} emissions will not decrease in a long period of time and reducing CO{sub 2} emissions may handicap China's economic growth to some degree. Some policy implications of the empirical results have finally been proposed. - Highlights: > We conduct a panel data analysis of the energy-CO{sub 2}-economy nexus in China. > CO{sub 2} emissions, energy use and economic growth appear to be cointegrated. > There exists bidirectional causality between energy consumption and economic growth. > Energy consumption and economic growth are the long-run causes for CO{sub 2} emissions.

  8. Uncertainty of Energy Consumption Assessment of Domestic Buildings

    DEFF Research Database (Denmark)

    Brohus, Henrik; Heiselberg, Per; Simonsen, A.;

    2009-01-01

    of the uncertainty of energy consumption assessment of domestic buildings. The calculated energy consumption of a number of almost identical domestic buildings in Denmark is compared with the measured energy consumption. Furthermore, the uncertainty is determined by means of stochastic modelling based on input......In order to assess the influence of energy reduction initiatives, to determine the expected annual cost, to calculate life cycle cost, emission impact, etc. it is crucial to be able to assess the energy consumption reasonably accurate. The present work undertakes a theoretical and empirical study...... to correspond reasonably well; however, it is also found that significant differences may occur between calculated and measured energy consumption due to the spread and due to the fact that the result can only be determined with a certain probability. It is found that occupants' behaviour is the major...

  9. Quantification of Uncertainty in Predicting Building Energy Consumption

    DEFF Research Database (Denmark)

    Brohus, Henrik; Frier, Christian; Heiselberg, Per;

    2012-01-01

    for the dynamic thermal behaviour of buildings. However, for air flow and energy consumption it is found to be much more significant due to less “damping”. Probabilistic methods establish a new approach to the prediction of building energy consumption, enabling designers to include stochastic parameters like......Traditional building energy consumption calculation methods are characterised by rough approaches providing approximate figures with high and unknown levels of uncertainty. Lack of reliable energy resources and increasing concerns about climate change call for improved predictive tools. A new...... approach for the prediction of building energy consumption is presented. The approach quantifies the uncertainty of building energy consumption by means of stochastic differential equations. The approach is applied to a general heat balance for an arbitrary number of loads and zones in a building...

  10. Analysis on energy consumption index system of thermal power plant

    Science.gov (United States)

    Qian, J. B.; Zhang, N.; Li, H. F.

    2017-05-01

    Currently, the increasingly tense situation in the context of resources, energy conservation is a realistic choice to ease the energy constraint contradictions, reduce energy consumption thermal power plants has become an inevitable development direction. And combined with computer network technology to build thermal power “small index” to monitor and optimize the management system, the power plant is the application of information technology and to meet the power requirements of the product market competition. This paper, first described the research status of thermal power saving theory, then attempted to establish the small index system and build “small index” monitoring and optimization management system in thermal power plant. Finally elaborated key issues in the field of small thermal power plant technical and economic indicators to be further studied and resolved.

  11. Chemical process simulation for minimizing energy consumption in pulp mills

    Energy Technology Data Exchange (ETDEWEB)

    Cardoso, Marcelo; Oliveira, Katia Dionisio de; Costa, George Alberto Avelar [Department of Chemical Engineering/School of Engineering, Federal University of Minas Gerais (UFMG), Belo Horizonte/MG (Brazil); Passos, Maria Laura [Collaborator Researcher, Drying Center, Chemical Engineering Department, Federal University of Sao Carlos (UFSCar) (Brazil)

    2009-01-15

    Chemical process simulation has proven to be an effective tool for performing a systematic and global analysis of energy systems to identify routes for maximizing the process efficiency concerning to the heat recovery. This paper shows an application of computer simulations in a Brazilian pulp mill, using two strategies for minimizing the mill energy consumption. In the first one, the overall heat transfer coefficient has been predicted for each body of the multiple effect evaporators by using continuous on-line data from the industrial plant in the black liquor recover unit. By monitoring oscillations of this heat transfer coefficient, the suitable time for washing the evaporator heat transfer surfaces can be well determined, reducing the energy loss during black liquor evaporation. In the second strategy, the liquor combustion has been simulated as function of the black liquor solids concentration to analyze its effect on the recovery boiler efficiency improvement. (author)

  12. Research on Energy Consumption Evaluation Combined with Endogenous Pollutants of China Based on Entropy-Topsis%Research on Energy Consumption Evaluation Combined with Endogenous Pollutants of China Based on Entropy-Topsis

    Institute of Scientific and Technical Information of China (English)

    Zhao Ao; Wu Chunyou; Wang Enxu

    2011-01-01

    The traditional evaluation of energy consumption mostly introduces pollutants as a negative economic output into evaluating model, ignoring the configuration relationship among the energy input, pollutants as well as economic output. This paper considers the overall process of energy consumption and constructs an evaluation indication system of energy consumption level combined with endogenous pollutants based on entropytopsis method, then makes empirical research. The results show that China's energy consumption level presents a fluctuant rise in the premise of emission. Energy consumption level depends on the relationship among energy input, pollutants and economic output. The raise of energy consumption level should not increase economic output and reduce pollutant emission at the expense of environment. Finally, the whole paper puts forward the countermeasures to improve the overall level of energy consumption.

  13. A Case of Acute Psychosis Following Energy Drink Consumption.

    Science.gov (United States)

    Görgülü, Yasemin; Taşdelen, Öznur; Sönmez, Mehmet Bülent; Köse Çinar, Rugül

    2014-03-01

    Interest in energy drinks is increasing every day. Energy drink consumption is increasing proportionally. Users often utilize these drinks in order to enjoy, have fun and to increase performance and attention. However, consumption of the energy drinks sometimes may also cause adverse physical and psychological consequences. Unwanted physical results are in the more foreground, noticeable and visible but the data about psychological problems caused by energy drinks is accumulated over the years in the literature. In this case report, we describe the case of a young man with no psychiatric history who was hospitalized for psychotic symptoms following excessive consumption of energy drinks.

  14. The world energy consumption in 2001. Statistical yearbook ENERDATA 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    Statistical data on the world energy consumption are given to illustrate the following situation in 2001: the deceleration of the world economic growth and the high prices of oil slowed down the progression of the energy consumption: 0,7 % in 2001; stagnation of the gas and oil consumption and strong progression for coal and electricity in 2001; the deceleration for gas marks a strong inflection compared to the past trends. (A.L.B.)

  15. Sports/energy drinks consumption among young athletes in Kano ...

    African Journals Online (AJOL)

    Sports/energy drinks consumption among young athletes in Kano, Nigeria. ... Athletes who had 'ever' tried a sport drink were significantly higher (p<0.05) than ... health effects, and that they could distinguish between sport and energy drinks.

  16. Danish Sector Guide for Calculation of the Actual Energy Consumption

    DEFF Research Database (Denmark)

    Mortensen, Lone Hedegaard

    2016-01-01

    , the innovation network for sustainable construction, InnoBYG started work on a Danish sector guide for the calculation of actual energy consumption in relation to upgrading of buildings. The focus was to make a common guide for energy calculations that can be used by consultants performing calculations...... consumption compared with the estimated energy demand by calculation. The paper concludes that the result of an energy calculation should not be given as a single figure but rather as a spread between the best and worst case for the assumed conditions. Finally, a brief update on current actions is given...... related to the sector guide for calculation of actual energy consumption. Keywords – Energy calculations, actual energy consumption, energy perfomance...

  17. Low-energy-consumption hybrid lasers for silicon photonics

    DEFF Research Database (Denmark)

    Chung, Il-Sug; Ran, Qijiang; Mørk, Jesper

    2012-01-01

    Physics and characteristics of a hybrid vertical-cavity laser that can be an on-chip Si light source with high speed and low energy consumption are discussed.......Physics and characteristics of a hybrid vertical-cavity laser that can be an on-chip Si light source with high speed and low energy consumption are discussed....

  18. Online Anomaly Energy Consumption Detection Using Lambda Architecture

    DEFF Research Database (Denmark)

    Liu, Xiufeng; Iftikhar, Nadeem; Nielsen, Per Sieverts;

    2016-01-01

    With the widely use of smart meters in the energy sector, anomaly detection becomes a crucial mean to study the unusual consumption behaviors of customers, and to discover unexpected events of using energy promptly. Detecting consumption anomalies is, essentially, a real-time big data analytics p...

  19. A Case of Acute Psychosis Following Energy Drink Consumption

    OpenAIRE

    G?RG?L?, Yasemin; TA?DELEN, ?znur; S?NMEZ, Mehmet B?lent; K?SE ?INAR, Rug?l

    2014-01-01

    Interest in energy drinks is increasing every day. Energy drink consumption is increasing proportionally. Users often utilize these drinks in order to enjoy, have fun and to increase performance and attention. However, consumption of the energy drinks sometimes may also cause adverse physical and psychological consequences. Unwanted physical results are in the more foreground, noticeable and visible but the data about psychological problems caused by energy drinks is accumulated over the year...

  20. [Energy Consumption Comparison and Energy Saving Approaches for Different Wastewater Treatment Processes in a Large-scale Reclaimed Water Plant].

    Science.gov (United States)

    Yang, Min; Li, Ya-ming; Wei, Yuan-song; Lü, Jian; Yu, Da-wei; Liu, Ji-bao; Fan, Yao-bo

    2015-06-01

    Energy consumption is the main performance indicator of reclaimed water plant (RWP) operation. Methods of specific energy consumption analysis, unit energy consumption analysis and redundancy analysis were applied to investigate the composition and spatio-temporal distribution of energy consumption in Qinghe RWP with inverted A2/O, A2/O and A2/O-MBR processes. And the A2/ O-MBR process was mainly analyzed to identify the main nodes and causes for high energy consumption, approaches for energy saving were explored, and the energy consumption before and after upgrading for energy saving was compared. The results showed that aeration was the key factor affecting energy consumption in both conventional and A2/O-MBR processes, accounting for 42.97% and 50.65% of total energy consumption, respectively. A pulsating aeration allowed an increasing membrane flux and remarkably reduced the energy consumption of the A2/O-MBR process while still meeting the effluent standard, e.g., the membrane flux was increased by 20%, and the energy consumptions per kiloton wastewater and kilogram COD(removed) were decreased by 42.39% to 0.53 kW-h-kg-3 and by 54.74% to 1.29 kW x h x kg(-1), respectively. The decrease of backflow ratio in the A2/O-MBR process within a certain range would not deteriorate the effluent quality due to its insignificant correlation with the effluent quality, and therefore may be considered as one of the ways for further energy saving.

  1. Energy consumption in the Danish fishery

    DEFF Research Database (Denmark)

    Thrane, Mikkel

    2004-01-01

    that there are great differences in fuel consumption between fisheries targeting groundfish or shellfish and those targeting pelagic fish or industrial fish. Here, I show that fuel consumption per kilogram of caught fish varies considerably as a function of fishing gear and vessel size, even considering the same...... fisheries targeting groundfish or shellfish and those targeting pelagic fish or industrial fish. Here, I show that fuel consumption per kilogram of caught fish varies considerably as a function of fishing gear and vessel size, even considering the same target species. I argue that these differences need......Previous studies based on life-cycle assessment (LCA) in Denmark and Sweden have shown that the fishery is the environmental "hot spot" in the life cycle of certain fish products. Within the fishery, fuel consumption is one of the most important factors addressed by LCA. The present study reveals...

  2. A panel study of nuclear energy consumption and economic growth

    Energy Technology Data Exchange (ETDEWEB)

    Apergis, Nicholas [Department of Banking and Financial Management, University of Piraeus, Karaoli and Dimitriou 80, Piraeus, ATTIKI 18534 (Greece); Payne, James E. [Interim Dean and Professor of Economics, College of Arts and Sciences, Illinois State University, Normal, IL 61790-4100 (United States)

    2010-05-15

    This study examines the relationship between nuclear energy consumption and economic growth for sixteen countries within a multivariate panel framework over the period 1980-2005. Pedroni's (1999, 2004) heterogeneous panel cointegration test reveals there is a long-run equilibrium relationship between real GDP, nuclear energy consumption, real gross fixed capital formation, and the labor force with the respective coefficients positive and statistically significant. The results of the panel vector error correction model finds bidirectional causality between nuclear energy consumption and economic growth in the short-run while unidirectional causality from nuclear energy consumption to economic growth in the long-run. Thus, the results provide support for the feedback hypothesis associated with the relationship between nuclear energy consumption and economic growth. (author)

  3. Energy audit in small wastewater treatment plants: methodology, energy consumption indicators, and lessons learned.

    Science.gov (United States)

    Foladori, P; Vaccari, M; Vitali, F

    2015-01-01

    Energy audits in wastewater treatment plants (WWTPs) reveal large differences in the energy consumption in the various stages, depending also on the indicators used in the audits. This work is aimed at formulating a suitable methodology to perform audits in WWTPs and identifying the most suitable key energy consumption indicators for comparison among different plants and benchmarking. Hydraulic-based stages, stages based on chemical oxygen demand, sludge-based stages and building stages were distinguished in WWTPs and analysed with different energy indicators. Detailed energy audits were carried out on five small WWTPs treating less than 10,000 population equivalent and using continuous data for 2 years. The plants have in common a low designed capacity utilization (52% on average) and equipment oversizing which leads to waste of energy in the absence of controls and inverters (a common situation in small plants). The study confirms that there are several opportunities for reducing energy consumption in small WWTPs: in addition to the pumping of influent wastewater and aeration, small plants demonstrate low energy efficiency in recirculation of settled sludge and in aerobic stabilization. Denitrification above 75% is ensured through intermittent aeration and without recirculation of mixed liquor. Automation in place of manual controls is mandatory in illumination and electrical heating.

  4. Energy consumption in the Danish fishery

    DEFF Research Database (Denmark)

    Thrane, Mikkel

    2003-01-01

    Previous studies based on Life Cycle Assessment (LCA) in Denmark and Sweden have shown that the fishery is the environmental "hot spot" in the life cycle of fish products. Within the fishery, fuel consumption is one of the most important factors addressed by LCA. The present study reveals...... that there are great differences in the fuel consumption between fisheries targeting ground or shellfish and those targeting pelagic or industrial fish....

  5. 降低空调系统能耗的显热负荷分级构想%Conception of Sensible Load Grading to Reduce Energy Consumption of Air-conditioning System

    Institute of Scientific and Technical Information of China (English)

    李先庭; 沈翀; 王宝龙; 石文星

    2016-01-01

    Traditionally, cooling load is simply divided into sensible heat load and latent heat load. The difference among the reduction of cooling load, reduction of energy consumption and efifcient handling of cooling load is not understood quite well, which is not good for constructing more energy-efifcient air-conditioning system. Based on the traditional classiifcation of cooling load, the idea of grading sensible heat load is proposed, where the sensible load is classiifed into high-grade, mid-grade and low-grade load according to its temperature. The idea show how to reduce the high-grade load and how to convert the high-grade load into mid-grade or low-grade load. Also the idea is employed to analyze the process of sensible heat load forming, converting, and handling. The difference between the reduction of cooling load and conversion between different grades is clearly distinguished by the idea. The grading of sensible heat load will help to build more energy-efifcient air-conditioning system.%传统空调系统只将空调负荷分为热负荷和湿负荷,且对负荷降低、能耗降低和负荷高效处理之间的差别认识不深入,不利于构思更高效的空调系统形式。在热湿负荷分类的基础上,提出了显热负荷的品位分级思想,即将负荷按温度分成高品位负荷、中品位负荷和低品位负荷。通过运用几种不同空调方式,展示了利用该思想如何更有效地减少高品位负荷数量以及如何将部分传统的高品位负荷转化成中品位或低品位负荷,从而降低空调系统的能耗;另一方面可更为清晰地分析显热负荷从形成、转移到被处理的过程,厘清了负荷降低与负荷转移之间的关系。显热负荷分级的思想将为新型空调系统形式的构建提供理论指导。

  6. Energy consumption and economic growth revisited in African countries

    Energy Technology Data Exchange (ETDEWEB)

    Eggoh, Jude C.; Bangake, Chrysost; Rault, Christophe [Orleans Univ. (France). LEO

    2011-09-15

    The aim of this paper is to provide new empirical evidence on the relationship between energy consumption and economic growth for 21 African countries over the period from 1970 to 2006, using recently developed panel cointegration and causality tests. The countries are divided into two groups: net energy importers and net energy exporters. It is found that there exists a long-run equilibrium relationship between energy consumption, real GDP, prices, labor and capital for each group of countries as well as for the whole set of countries. This result is robust to possible cross-country dependence and still holds when allowing for multiple endogenous structural breaks, which can differ among countries. Furthermore, we find that decreasing energy consumption decreases growth and vice versa, and that increasing energy consumption increases growth, and vice versa, and that this applies for both energy exporters and importers. Finally, there is a marked difference in the cointegration relationship when country groups are considered. (orig.)

  7. CO{sub 2} emissions, energy consumption and economic growth in BRIC countries

    Energy Technology Data Exchange (ETDEWEB)

    Pao, Hsiao-Tien; Tsai, Chung-Ming [Department of Management Science, National Chiao Tung University (China)

    2010-12-15

    This paper examines dynamic causal relationships between pollutant emissions, energy consumption and output for a panel of BRIC countries over the period 1971-2005, except for Russia (1990-2005). In long-run equilibrium energy consumption has a positive and statistically significant impact on emissions, while real output exhibits the inverted U-shape pattern associated with the Environmental Kuznets Curve (EKC) hypothesis with the threshold income of 5.393 (in logarithms). In the short term, changes in emissions are driven mostly by the error correction term and short term energy consumption shocks, as opposed to short term output shocks for each country. Short-term deviations from the long term equilibrium take from 0.770 years (Russia) to 5.848 years (Brazil) to correct. The panel causality results indicate there are energy consumption-emissions bidirectional strong causality and energy consumption-output bidirectional long-run causality, along with unidirectional both strong and short-run causalities from emissions and energy consumption, respectively, to output. Overall, in order to reduce emissions and not to adversely affect economic growth, increasing both energy supply investment and energy efficiency, and stepping up energy conservation policies to reduce unnecessary wastage of energy can be initiated for energy-dependent BRIC countries. (author)

  8. User characteristics of a smartphone app to reduce alcohol consumption.

    Science.gov (United States)

    Garnett, Claire; Crane, David; West, Robert; Michie, Susan; Brown, Jamie; Winstock, Adam

    2017-03-17

    Digital interventions are available to help people reduce their alcohol consumption, but it is not known who uses these interventions and how this treatment-seeking group compares with the general population of drinkers. The study objective was to compare the socio-demographic and drinking characteristics of users of the 'Drinks Meter' smartphone app with the general population of drinkers in England and website users of the same intervention. Data were used from the Drinks Meter app and website, and a nationally representative cross-sectional survey in England (Alcohol Toolkit Study). Participants were drinkers aged 16+ in England. Data were collected on participants' age, gender, region, sexual orientation, social grade and AUDIT score. Regression analyses were conducted to assess differences in socio-demographic and drinking characteristics between samples. Drinks Meter app users, compared with drinkers of the general population, were younger, more likely to be from the South, not heterosexual, less likely to be of a lower social grade and had a higher mean AUDIT score. Drinks Meter app users were younger than website users and reported greater alcohol consumption and related harms. Drinkers using the Drinks Meter app are more likely to be younger and report greater alcohol consumption and related harms compared with the general population of drinkers in England and website users of the same intervention. Apps that provide feedback on drinking appear to be reaching those who report greater alcohol consumption and related harms.

  9. Development of methods for reducing energy consumption in relation to the drying process involved in packaging production. Explanation of process technology in relation to flexography, serigraphy and photogravure including the laminating and varnishing processes which follow. Udvikling af metoder til nedsaettelse af energiforbruget ved toerring i emballagekonvertering. Indfoering i procesteknik inden for flexo-, dyb- og silketryk samt de efterfoelgende laminerings- og lakeringsprocesser

    Energy Technology Data Exchange (ETDEWEB)

    Schlemmer, P.; Nielsen, K.

    1985-02-01

    Three package printing processes, including the drying processes, are described, and it is concluded that ''nip roll coating'' could be used to help reduce overall energy consumption. It is also suggested that processes utilized in the Danish packaging industry need serious further investigation. (AB).

  10. Design of a New Type of Distribution Valve for Hydraulic Breaker and Analysis of Energy Consumption

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Energy consumed by distribution valves causes an energy loss for the output energy of hydraulic breakers, which has a significant influence on its efficiency. A new type of distribution valve used for hydraulic breakers, designed to reduce energy consumption, is analyzed on the basis of the operating principle and energy loss of the current distribution valve. The new distribution valve adopts a cone valve and the optimization technique of unequal open degree for the valve port. Theoretical calculations and analyses have proven that the new distribution valve can reduce energy loss by 9.0127J, or energy consumption by 31%, during an impact cycle and the efficiency of the hydraulic breaker can be raised by 4.5%. It has the following characteristics: little leakage, little pressure loss and low energy consumption.

  11. Optimal Buildings’ Energy Consumption Calculus through a Distributed Experiment Execution

    Directory of Open Access Journals (Sweden)

    Pau Fonseca i Casas

    2015-01-01

    Full Text Available The calculus of building energy consumption is a demanding task because multiple factors must be considered during experimentation. Additionally, the definition of the model and the experiments is complex because the problem is multidisciplinary. When we face complex models and experiments that require a considerable amount of computational resources, the application of solutions is imperative to reduce the amount of time needed to define the model and the experiments and to obtain the answers. In this paper, we first address the definition and the implementation of an environmental model that describes the behavior of a building from a sustainability point of view and enables the use of several simulations and calculus engines in a cosimulation scenario. Second, we define a distributed experimental framework that enables us to obtain results in an accurate amount of time. This methodology has been applied to the energy consumption calculation, but it can also be applied to other modeling problems that usually require a considerable amount of resources by reducing the amount of time needed to perform modeling, implementation, verification, and experimentation.

  12. Energy consumption, income, and carbon emissions in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Soytas, Ugur [Department of Business Administration, Middle East Technical University Ankara, Turkey 06531 (Turkey); Sari, Ramazan [Department of Economics, Abant Izzet Baysal University Bolu, Turkey 14280 (Turkey); Ewing, Bradley T. [Rawls College of Business Texas Tech University Lubbock, TX 79409-2101 (United States)

    2007-05-15

    This paper investigates the effect of energy consumption and output on carbon emissions in the United States. Earlier research focused on testing the existence and/or shape of an environmental Kuznets curve without taking energy consumption into account. We investigate the Granger causality relationship between income, energy consumption, and carbon emissions, including labor and gross fixed capital formation in the model. We find that income does not Granger cause carbon emissions in the US in the long run, but energy use does. Hence, income growth by itself may not become a solution to environmental problems. (author)

  13. Energy efficiency in a water supply system:Energy consumption and CO2 emission

    Institute of Scientific and Technical Information of China (English)

    Helena M.RAMOS; Filipe VIEIRA; Didia I.C.COVAS

    2010-01-01

    This paper presents important fundamentals associated with water and energy efficiency and highlights the importance of using renewable energy sources.A model of multi-criteria optimization for energy efficiency based on water and environmental management policies,including the preservation of water resources and the control of water pressure and energy consumption through a hybrid energy solution,was developed and applied to a water supply system.The methodology developed includes three solutions:(1)the use of a water turbine in pipe systems where pressures are higher than necessary and pressure-reducing valves are installed,(2)the optimization of pumping operation according to the electricity tariff and water demand,and(3)the use of other renewable energy sources,including a wind turbine,to supply energy to the pumping station,with the remaining energy being sold to the national electric grid.The use of an integrated solution(water and energy)proves to be a valuable input for creating benefits from available hydro energy in the water supply system in order to produce clean power,and the use of a wind source allows for the reduction of energy consumption in pumping stations,as well as of the CO2 emission to the atmosphere.

  14. Simulation of energy consumption for quadruped walking vehicle

    Science.gov (United States)

    Lei, Jingtao; Gao, Feng; Xu, Guoyan

    2006-11-01

    Simulation of energy consumption for walking vehicle is one of the basic way to preliminarily estimate the energy that will be consumed before constructing the real vehicle, providing basis for the design of vehicle to minish energy consumption. One of the most influential factors of the accuracy dynamic simulation is the appropriate contact model between leg and ground. In this paper, we adopt virtual prototyping technique to develop the dynamic modeling of a quadruped walking vehicle considering contact force between legs and ground during walking, finish simulation of dynamics and obtain dynamics characteristics, investigate the effects of different contact condition and the energy consumption. The purpose is to analyze the relationship between energy consumption and relevant influence factors, and the energy efficiency during walking is discussed with different walking velocity, strokes, duty factors and different contact material. Moreover contact force is obtained from simulations. Commercial ADAMS package is used.

  15. Practical versus theoretical domestic energy consumption for space heating

    Energy Technology Data Exchange (ETDEWEB)

    Audenaert, A., E-mail: amaryllis.audenaert@artesis.be [Department of Applied Engineering: Construction, Artesis University College of Antwerp, Paardenmarkt 92, B-2000 Antwerp (Belgium); Department of Environment, Technology and Technology Management, University of Antwerp, Prinsstraat 13, B-2000 Antwerp (Belgium); Briffaerts, K. [Unit Transition Energy and Environment, VITO NV, Boeretang 200, B-2400 Mol (Belgium); Engels, L. [Department of Applied Engineering: Construction, Artesis University College of Antwerp, Paardenmarkt 92, B-2000 Antwerp (Belgium)

    2011-09-15

    Methods to calculate the theoretical energy consumption consider several things: the number of degree days per year that need to be compensated by heating, the characteristics of the dwelling, the number of occupants and the characteristics of the installation for space heating and sanitary hot water. However, these methods do not take into account consumer behaviour, which may affect the actual consumption. The theoretical calculation methods are based on assumptions and use a number of standardized parameters. The difference between the actual and the theoretical energy consumption, and the impact of the residents' behaviour on energy consumption, is analysed by means of a literature study and a practical research. An energy advice procedure (EAP) audit is executed in five dwellings, as well as a survey regarding the energy related behaviour of the households. The theoretically calculated consumption is compared with the billed actual energy consumption of the families. The results show some problems with the current procedure and give some options to improve it. Some research needs are identified to gain more insights in the influence of different behavioural factors on the actual energy use for heating. - Highlights: > The energy advice procedure (EAP) calculates the energy use for heating in dwellings. > Calculations are compared with the real energy use for 5 dwellings. > A survey on the occupants' behaviour is used to interpret the observed differences. > Default values used in the EAP can be very different from the observed behaviour.

  16. Energy consumption in the Danish fishery

    DEFF Research Database (Denmark)

    Thrane, Mikkel

    2003-01-01

    Previous studies based on Life Cycle Assessment (LCA) in Denmark and Sweden have shown that the fishery is the environmental "hot spot" in the life cycle of fish products. Within the fishery, fuel consumption is one of the most important factors addressed by LCA. The present study reveals that th...... that there are great differences in the fuel consumption between fisheries targeting ground or shellfish and those targeting pelagic or industrial fish.......Previous studies based on Life Cycle Assessment (LCA) in Denmark and Sweden have shown that the fishery is the environmental "hot spot" in the life cycle of fish products. Within the fishery, fuel consumption is one of the most important factors addressed by LCA. The present study reveals...

  17. [Risks associated with unrestricted consumption of alkaline-reduced water].

    Science.gov (United States)

    Henry, Marc; Chambron, Jacques

    2014-01-01

    Consumption of alkaline reduced water produced by domestic electrolysis devices was approved in Japan in 1965 by the Minister of Health, Work and Wellbeing, for the treatment of gastrointestinal disorders. Today, these devices are also freely available in France. The commercial information provided with the devices recommends the consumption of 1 to 1.5 liters per day, not only for gastrointestinal disorders but also for numerous other illnesses such as diabetes, cancer and inflammation. Academic research on this subject has been undergoing in Japan since 1990, and has established that the active ingredient is dissolved dihydrogen, which eliminates the free radical HO· in vivo. It has also been shown that electrode degradation during use of the devices releases highly reactive platinum nanoparticles, the toxicity of which is unknown. The authors of this report recommend alerting the French health authorities to the uncontrolled availability of these devices that generate drug substances and should therefore be subject to regulatory requirements.

  18. Reducing sugary drink consumption: New York City's approach.

    Science.gov (United States)

    Kansagra, Susan M; Kennelly, Maura O; Nonas, Cathy A; Curtis, Christine J; Van Wye, Gretchen; Goodman, Andrew; Farley, Thomas A

    2015-04-01

    Studies have linked the consumption of sugary drinks to weight gain, obesity, and type 2 diabetes. Since 2006, New York City has taken several actions to reduce consumption. Nutrition standards limited sugary drinks served by city agencies. Mass media campaigns educated New Yorkers on the added sugars in sugary drinks and their health impact. Policy proposals included an excise tax, a restriction on use of Supplemental Nutrition Assistance Program benefits, and a cap on sugary drink portion sizes in food service establishments. These initiatives were accompanied by a 35% decrease in the number of New York City adults consuming one or more sugary drinks a day and a 27% decrease in public high school students doing so from 2007 to 2013.

  19. Analysis of energy consumption nodes wireless sensor networks

    Directory of Open Access Journals (Sweden)

    Павел Викторович Галкин

    2014-09-01

    Full Text Available The article considers the issue of energy consumption and energy efficiency of the nodes of wireless sensor networks (WSN. It is revealed that the main factor influencing the increase in the probability of a malfunction of sensor networks is the limited resources of the power node. The methodology of calculation of energy consumption of nodes and the lifetime of the elements of their power.

  20. Energy consumption analysis for the Mars deep space station

    Science.gov (United States)

    Hayes, N. V.

    1982-01-01

    Results for the energy consumption analysis at the Mars deep space station are presented. It is shown that the major energy consumers are the 64-Meter antenna building and the operations support building. Verification of the antenna's energy consumption is highly dependent on an accurate knowlege of the tracking operations. The importance of a regular maintenance schedule for the watt hour meters installed at the station is indicated.

  1. Factors affecting wood energy consumption by U.S. households

    Science.gov (United States)

    Nianfu Song; Francisco X. Aguilar; Stephen R. Shifley; Michael E. Goerndt

    2012-01-01

    About 23% of energy derived from woody sources in the U.S. was consumed by households, of which 70% was used by households in rural areas in 2005. We investigated factors affecting household-level wood energy consumption in the four continental U.S. regions using data from the U.S. Residential Energy Consumption Survey. To account for a large number of zero...

  2. Energy-Consumption Factors of Air-Stream Moulding Machines

    Directory of Open Access Journals (Sweden)

    K. Smyksy

    2012-09-01

    Full Text Available In this article, an outline of the key questions connected with the essential problems of energy-consumption of air-stream mouldingmachines has been presented. Research results and calculations of requisite parameters appraisable of energy-consumption of air-streammoulding machines have been supplemented also by the data analysis of offer of the moulding machines manufacturers. The attention onconstructional and technological factors which are favourable for the diminution of energy-consuming of the moulding process has beenpaid.

  3. Energy drinks consumption in male construction workers, Chonburi province.

    Science.gov (United States)

    Pichainarong, Natchaporn; Chaveepojnkamjorn, Wisit; Khobjit, Pattama; Veerachai, Viroj; Sujirarat, Dusit

    2004-12-01

    This unmatched case-control study aimed to determine the relationship among caffeine drinks consumption known as "energy drinks consumption", drug dependence and related factors in male construction workers in Chonburi Province. It was conducted during December 15, 2001 and February 15, 2002. Data were collected using interview questionnaires. The logistic regression was used to control possible confounding factors. The subjects consisted of 186 cases who had consumed energy drinks for more than 3 months and 186 controls who had given up for more than 3 months. They were frequency/group matched by age group. There was statistically significant association among energy drinks consumption and overtime work, motivation from advertisements, positive attitude of energy drinks consumption, alcohol drinks, smoking and ex-taking Kratom behavior. Multivariate analyses revealed that only 5 factors were related to energy drinks consumption: marital status (OR = 1.88, 95%CI: 1.14, 3.11), overtime work (OR = 2.84, 95%CI: 1.73, 4.64), motivation from advertisements (OR = 2.72, 95%CI: 1.67, 4.42), positive attitude of energy drinks consumption (OR = 4.06, 95%CI: 1.65, 10.01) and ex-taking Kratom behavior (OR = 2.77, 95%CI: 1.19, 6.44). As a result, construction workers should be provided with the knowledge of energy drinks consumption, the effect of drug dependence behavior, and the advantages of safe and healthy food that is cheap, readily available, and rich in nutrients.

  4. Gap modification improves blowers. Reducing the noise emission by reducing the energy consumption of axial flow machines. Spaltmodifikation verbessert Ventilatoren. Minderung der Schallemission bei Reduzierung des Energieverbrauchs axialer Stroemungsmaschinen

    Energy Technology Data Exchange (ETDEWEB)

    Kameier, F. (TU Berlin (Germany). Hermann-Foettinger Inst.); Neise, W. (DLR, Berlin (Germany). Abt. Turbulenzforschung)

    1994-08-01

    The article describes a design feature that can reduce the sound emission of axial flow machines by up to 11 dB (A) (specific sound level), whilst improving the efficiency by seven percentage points. This improvement can be carried out on equipment that is already in use, as well as on new design. The gap between the rotating blades and the fixed housing, causes losses and an increased sound emission in axial flow machines. The aerodynamic and acoustic effects of a variation in the gap has been extensively examined on a model of a high-pressure axial blower. The widest gap (0.5% of the impeller diameter) has been retroactively improved in design so that a reduction in the negative effect of the gap occurs whilst retaining its nominal size. The diameter of the impeller as well as that of the housing remain unchanged. The gap modification, for which a patent has been applied for, has the equivalent effect of halving the gap width. (orig.)

  5. Energy consumption and economic growth revisited in African countries

    Energy Technology Data Exchange (ETDEWEB)

    Eggoh, Jude C., E-mail: comlanvi-jude.eggoh@univ-orleans.fr [Laboratoire d' Economie d' Orleans (LEO), Universite d' Orleans, Rue de Blois, BP: 6739, 45067 Orleans Cedex 2 (France); Bangake, Chrysost [Laboratoire d' Economie d' Orleans (LEO), Universite d' Orleans, Rue de Blois, BP: 6739, 45067 Orleans Cedex 2 (France); Universite d' Artois and Laboratoire EQUIPPE, Lille 1, FSES, 59655 Villeneuve d' Ascq Cedex (France); Rault, Christophe [Laboratoire d' Economie d' Orleans (LEO), Universite d' Orleans, Rue de Blois, BP: 6739, 45067 Orleans Cedex 2 (France); Toulouse Business School (France)

    2011-11-15

    The aim of this paper is to provide new empirical evidence on the relationship between energy consumption and economic growth for 21 African countries over the period from 1970 to 2006, using recently developed panel cointegration and causality tests. The countries are divided into two groups: net energy importers and net energy exporters. It is found that there exists a long-run equilibrium relationship between energy consumption, real GDP, prices, labor and capital for each group of countries as well as for the whole set of countries. This result is robust to possible cross-country dependence and still holds when allowing for multiple endogenous structural breaks, which can differ among countries. Furthermore, we find that decreasing energy consumption decreases growth and vice versa, and that increasing energy consumption increases growth, and vice versa, and that this applies for both energy exporters and importers. Finally, there is a marked difference in the cointegration relationship when country groups are considered. - Highlights: > We assess the energy consumption and economic growth nexus in 21 African countries. > There exists a long-run relationship between energy consumption and economic growth. > This result is robust to cross-country dependence and for structural breaks. > Our findings finally support the feedback hypothesis of bidirectional causality.

  6. The Effects of Envelope Design Alternatives on the Energy Consumption of Residential Houses in Indonesia

    Directory of Open Access Journals (Sweden)

    Andre Feliks Setiawan

    2015-04-01

    Full Text Available As an emerging country and one of the most populous countries in the world, Indonesia requires a sufficient energy supply to ensure the nation’s continued development. In response to this increasing energy demand, various studies have proposed energy-saving measures; building envelope design is considered to be a typical energy-saving technique. A significant goal in achieving greener buildings is learning how to reduce a building’s energy consumption by applying an efficient energy-saving design. This study used the eQUEST software to investigate how different types of roof construction, glazing and sun-shading techniques affect the energy consumption of residential structures in Indonesia in common scenarios. The results indicate that window shading has the most significant impact on a building’s overall energy consumption, followed by the use of an appropriate glazing, whereas the roof type produced smaller energy efficiency benefits.

  7. Electricity consumption and energy efficiency in agricultural factories; Stromverbrauch und Energieeffizienz im landwirtschaftlichen Betrieb

    Energy Technology Data Exchange (ETDEWEB)

    Neser, Stefan; Neiber, Josef; Bonkoss, Katja [Bayerische Landesanstalt fuer Landwirtschaft, Freising (Germany). Inst. fuer Landtechnik und Tierhaltung

    2012-11-15

    One main approach for energy conservation in pig farming factories is in the area of ventilation and the climate in the stable. The electricity consumption can be reduced significantly by means of aerodynamically favourable design of airflow and optimal dimensioning of the ventilation system as well as by control technology such as frequency control and EC technology. In the case of dairy cattle farming factories, the main approach for energy conservation is in the area of milk removal and cooling of milk. The energy consumption can be reduced significantly by energy efficient plants such as frequency controlled vacuum pumps, pre-cooling and heat-recovery. Fundamentally, beside the criterion electricity consumption, other criteria such as water consumption, functional reliability and the quality of the process should be considered in the decision-making in order to develop an energy efficient overall process. Especially the specific energy consumption of the individual components should be considered at new investments and replacement investments. The consideration of the factorial development as well as the actual and planned energy supply of the factory are of great importance due to the increasing energy prices. Thus, in future the reduction of the maximal power consumption and the factorial load management are of importance with respect to the adjustment to the profiles of power generation from renewable energies.

  8. Energy Efficient Smartphones: Minimizing the Energy Consumption of Smartphone GPUs using DVFS Governors

    KAUST Repository

    Ahmad, Enas M.

    2013-05-15

    Modern smartphones are being designed with increasing processing power, memory capacity, network communication, and graphics performance. Although all of these features are enriching and expanding the experience of a smartphone user, they are significantly adding an overhead on the limited energy of the battery. This thesis aims at enhancing the energy efficiency of modern smartphones and increasing their battery life by minimizing the energy consumption of smartphones Graphical Processing Unit (GPU). Smartphone operating systems are becoming fully hardware-accelerated, which implies relying on the GPU power for rendering all application graphics. In addition, the GPUs installed in smartphones are becoming more and more powerful by the day. This raises an energy consumption concern. We present a novel implementation of GPU Scaling Governors, a Dynamic Voltage and Frequency Scaling (DVFS) scheme implemented in the Android kernel to dynamically scale the GPU. The scheme includes four main governors: Performance, Powersave, Ondmand, and Conservative. Unlike previous studies which looked into the power efficiency of mobile GPUs only through simulation and power estimations, we have implemented our approach on a real modern smartphone GPU, and acquired actual energy measurements using an external power monitor. Our results show that the energy consumption of smartphones can be reduced up to 15% using the Conservative governor in 2D rendering mode, and up to 9% in 3D rendering mode, with minimal effect on the performance.

  9. Energy Consumption and Economic Growth: Evidence from COMESA Countries

    OpenAIRE

    Chali, Nondo; Mulugeta, Kahsai

    2009-01-01

    This study applies panel data techniques to investigate the long-run relationship between energy consumption and GDP for a panel of 19 African countries (COMESA) based on annual data for the period 1980-2005. In the first step, we examine the degree of integration between GDP and energy consumption by employing three panel unit root tests and find that the variables are integrated of order one. In the second step, we investigate the long-run relationship between energy consumption and GDP. Re...

  10. Monitoring and optimization of energy consumption of base transceiver stations

    CERN Document Server

    Spagnuolo, Antonio; Vetromile, Carmela; Formosi, Roberto; Lubritto, Carmine

    2015-01-01

    The growth and development of the mobile phone network has led to an increased demand for energy by the telecommunications sector, with a noticeable impact on the environment. Monitoring of energy consumption is a great tool for understanding how to better manage this consumption and find the best strategy to adopt in order to maximize reduction of unnecessary usage of electricity. This paper reports on a monitoring campaign performed on six Base Transceiver Stations (BSs) located central Italy, with different technology, typology and technical characteristics. The study focuses on monitoring energy consumption and environmental parameters (temperature, noise, and global radiation), linking energy consumption with the load of telephone traffic and with the air conditioning functions used to cool the transmission equipment. Moreover, using experimental data collected, it is shown, with a Monte Carlo simulation based on power saving features, how the BS monitored could save energy.

  11. THE INFLUENCE OF AN APARTMENT POSITIONING ON ENERGY CONSUMPTION

    Directory of Open Access Journals (Sweden)

    Marcela PRADA

    2013-06-01

    Full Text Available This work is part of the highly topical subject of global warming and energy conservation. The article contains parametric studies of energy consumption and CO² emissions for an apartment located in a block of flats, depending on its location. It was studied the energy consumption of an apartment having different cardinal orientations in the same building and of an apartment with the same position inside the building but located in different climatic zones. The case studies show the difference between the energy consumption of an apartment depending on its position, thus resulting in a few general directions for their heat insulation, so that the specific energy consumption of the apartment is below 100 kWh/m² year.

  12. Economic energy distribution and consumption in a microgrid Part 2

    DEFF Research Database (Denmark)

    Tahersima, Fatemeh; Stoustrup, Jakob; Andersen, Palle

    2014-01-01

    Energy management of a small scale electrical microgrid is investigated. The microgrid comprises residential houses with local renewable generation, consumption and storage units. The microgrid has the possibility of connection to the electricity grid as well to compensate energy decit of local...... power producers. The nal objective is to full the microgrid's energy demands mainly from the local electricity producers. The other objective is to manage power consumption such that the consumption cost is minimum for individual households. In this study, a hierarchical controller composed of three...... levels is proposed. Each layer from bottom to top focus on individual energy consuming units, individual buildings, and the microgrid respectively. At the middle layer, a model predictive controller is formulated to schedule the building's energy consumption using potential load exibilities. The top...

  13. A Survey on Energy Consumption in Routing Protocols for MANET Using Cross Layer

    Directory of Open Access Journals (Sweden)

    Pandit Savyasaachi J

    2012-12-01

    Full Text Available This paper presents the exhaustive search on reduced energy consumption routing protocols for MANET using cross layer. There are so many techniques available for energy consumption in routing protocols. MANET is a collection of wireless mobile nodes that forms a temporarily dynamic network without any centralized administrator. Each node in MANET moves arbitrarily that result as random change in network topology. Cross-Layer Design has recently become the new hype in MANET systems. This paper is to examine the current research activities in energy consumption of Cross-Layer Design. Keywords: MANET, Routing Protocol, Infrastructure Network, Cross Layer.

  14. 10 CFR 434.508 - Determination of the design energy consumption and design energy cost.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Determination of the design energy consumption and design... FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.508 Determination of the design energy consumption and design energy cost. 508.1The...

  15. Energy consumption in the food supply system

    DEFF Research Database (Denmark)

    Kamp, Andreas; Østergård, Hanne; Hauggaard-Nielsen, Henrik

    2016-01-01

    Historically, productivity gains have been possible by the application of energy intensive technologies. In the future, new technologies and practices based on energy from renewable resources are central for the development of our food supply system and they will contribute in two different ways....... As the energy sector increasingly bases energy supply on renewable sources, the energy requirements of the food sector will automatically substitute renewable energy for non-renewable energy in all stages of food supply. In principle, the food sector does not need to change if renewable energy is sufficient...... and available as the energy carriers that we are used to today. We may think of this as passive adaptation. A passive adaptation strategy may support a development towards the image ‘high input – high output’. The food sector, however, may also actively adapt to a future without fossil fuels and change...

  16. Modelling energy consumption in a manufacturing plant using productivity KPIs

    Energy Technology Data Exchange (ETDEWEB)

    Gallachoir, Brian O.; Cahill, Caiman (Sustainable Energy Research Group, Dept. of Civil and Environmental Engineering, Univ. College Cork (Ireland))

    2009-07-01

    Energy efficiency initiatives in industrial plants are often focused on getting energy-consuming utilities and devices to operate more efficiently, or on conserving energy. While such device-oriented energy efficiency measures can achieve considerable savings, greater energy efficiency improvement may be achieved by improving the overall productivity and quality of manufacturing processes. The paper highlights the observed relationship between productivity and energy efficiency using aggregated data on unit consumption and production index data for Irish industry. Past studies have developed simple top-down models of final energy consumption in manufacturing plants using energy consumption and production output figures, but these models do not help identify opportunities for energy savings that could achieved through increased productivity. This paper proposes an improved and innovative method of modelling plant final energy demand that introduces standard productivity Key Performance Indicators (KPIs) into the model. The model demonstrates the relationship between energy consumption and productivity, and uses standard productivity metrics to identify the areas of manufacturing activity that offer the most potential for improved energy efficiency. The model provides a means of comparing the effect of device-oriented energy efficiency measures with the potential for improved energy efficiency through increased productivity.

  17. Is there a health benefit of reduced tobacco consumption?

    DEFF Research Database (Denmark)

    Pisinger, Charlotta; Godtfredsen, Nina S

    2007-01-01

    This review presents the available evidence on the health effects of reduced smoking. Smoking reduction was defined as reduction of the daily intake of tobacco without quitting. Only published papers were reviewed. Case reports and studies without a thorough definition of smoking reduction......% of baseline tobacco consumption. Most of the studies were small, with the populations selected and short follow-up periods. The limited data suggest that a substantial reduction in smoking improves several cardiovascular risk factors and respiratory symptoms. In addition, smoking reduction is associated...

  18. Use of nanofiltration to reduce cooling tower water consumption.

    Energy Technology Data Exchange (ETDEWEB)

    Altman, Susan Jeanne; Ciferno, Jared

    2010-10-01

    Nanofiltration (NF) can effectively treat cooling-tower water to reduce water consumption and maximize water usage efficiency of thermoelectric power plants. A pilot is being run to verify theoretical calculations. A side stream of water from a 900 gpm cooling tower is being treated by NF with the permeate returning to the cooling tower and the concentrate being discharged. The membrane efficiency is as high as over 50%. Salt rejection ranges from 77-97% with higher rejection for divalent ions. The pilot has demonstrated a reduction of makeup water of almost 20% and a reduction of discharge of over 50%.

  19. Sinopec to Further Replace and Reduce Oil Consumption

    Institute of Scientific and Technical Information of China (English)

    Yang Lijun

    2001-01-01

    @@ Sinopec is a big energy consumer as well as a major energy supplier. According to the 1999 data, the 6 oilfields under the group company consumed a total of 1.1503 million tons of crude oil,the self-consumption rate being 3.33%, and its refining enterprises, 5.26 million tons offuel oil, accounting for 62.91% of their fuel oil output totaling 8.36 million tons. The refinery-consumed fuel oil here is referred to as heavy oil. It is consumed separately by enterprises' self-supply power plants, totaling 557,000 tons; power stations,totaling 949,000 tons; boilers,totaling 1,248 million tons;fertilizer and chemical plants,totaling 1.517 million tons; and others totaling 547,000 tons.

  20. Reducing water freshwater consumption at coal-fired power plants : approaches used outside the United States.

    Energy Technology Data Exchange (ETDEWEB)

    Elcock, D. (Environmental Science Division)

    2011-05-09

    desalination. Some of the direct approaches, such as dry air cooling, desalination, and recovery of cooling tower water for boiler makeup water, are costly and are deployed primarily in countries with severe water shortages, such as China, Australia, and South Africa. Table 1 shows drivers and approaches for reducing freshwater consumption in several countries outside the United States. Indirect approaches reduce water consumption while meeting other objectives, such as improving plant efficiency. Plants with higher efficiencies use less energy to produce electricity, and because the greater the energy production, the greater the cooling water needs, increased efficiency will help reduce water consumption. Approaches for improving efficiency (and for indirectly reducing water consumption) include increasing the operating steam parameters (temperature and pressure); using more efficient coal-fired technologies such as cogeneration, IGCC, and direct firing of gas turbines with coal; replacing or retrofitting existing inefficient plants to make them more efficient; installing high-performance monitoring and process controls; and coal drying. The motivations for increasing power plant efficiency outside the United States (and indirectly reducing water consumption) include the following: (1) countries that agreed to reduce carbon emissions (by ratifying the Kyoto protocol) find that one of the most effective ways to do so is to improve plant efficiency; (2) countries that import fuel (e.g., Japan) need highly efficient plants to compensate for higher coal costs; (3) countries with particularly large and growing energy demands, such as China and India, need large, efficient plants; (4) countries with large supplies of low-rank coals, such as Germany, need efficient processes to use such low-energy coals. Some countries have policies that encourage or mandate reduced water consumption - either directly or indirectly. For example, the European Union encourages increased efficiency

  1. Survey of rural household energy-consumption in China

    Energy Technology Data Exchange (ETDEWEB)

    Wang Xh; Fend Zm [Nanjing Agricultural Univ., JS (China)

    1996-07-01

    Based on comprehensive energy surveys of 3240 households in six different regions, we present the level and structure of rural household energy consumption. There are large differences among regions which depend on locality and available fuels. Energy consumption per household accounts for 700-1200 kgce (we use 7000 kcal/kgce), 40-60% of which is used for cooking; 60-90% of total household energy consumption is in the form of biomass. The average energy-conversion efficiency using biomass fuels is in the range 10-20%. Where the strain of traditional patterns of biomass use on the resource base became too severe, the balance between local agricultural and hillside ecosystems has unraveled and caused accelerating destruction of limited land resources. Higher income households need more commercial energy, especially in the form of electricity. Rural household energy will continue to depend mainly on biomass. (UK)

  2. Water consumption in the energy sector

    DEFF Research Database (Denmark)

    Larsen, Morten Andreas Dahl; Drews, Martin; Gani, Rafiqul

    2016-01-01

    Energy, water, and food systems are closely interlinked in the Energy-Water-Food Nexus. Water is of paramount importance for the energy sector. Fossil fuels require water for extraction, trans-port and processing. Thermal power plants require water for cooling, whether they use nuclear, fossil......-users. The waste water is often returned to the environment after energy requiring waste water management....... or biofuels. Hydropower is based on water in rivers or reservoirs. Feedstock production for biofuels may depend on water for irrigation. On the other hand, energy is necessary for pumping of ground- and surface water, for water treatment as well as for transport and distribution of water to end...

  3. CLEAN-AIR heat pump. Reduced energy consumption for ventilation in buildings by integrating air cleaning and heat pump. Final Report; CLEAN-AIR heat pump - Reduceret energiforbrug til ventilation af bygninger ved luftrensning integreret med luft varmepumpe. Slut rapport

    Energy Technology Data Exchange (ETDEWEB)

    Fang, L.; Olesen, Bjarne W.; Molinaro, G.; Simmonsen, P.; Skocajic, S. [Danmarks Tekniske Univ. Institut for Byggeri og Anlaeg, Lyngby (Denmark); Hummelshoej, R.M.; Carlassara, L. [COWI A/S, Lyngby, (Denmark); Groenbaek, H.; Hansen, Ole R. [Exhausto A/S, Langeskov (Denmark)

    2011-07-01

    This report summarizes task 1 of the Clean Air Heat Pump project - modelling and simulation on energy savings when using the clean air heat pump for ventilation, air cleaning and energy recovery. The total energy consumption of the proposed ventilation systems using clean air heat pump technology was calculated by a theoretical model and compared with the reference ventilation systems (conventional ventilation systems). The energy compared between the two systems includes energy used for heating, cooling and fan. The simulation and energy saving calculation was made for the application of the clean air heat pump in three typical climate conditions, i.e. mild-cold, mild-hot and hot and wet climates. Real climate data recorded from three cities in 2002 was used for the calculation. The three cities were Copenhagen (Denmark), Milan (Italy) and Colombo (Sir Lanka) which represent the above three typical climate zones. For the Danish climate (the mild cold climate), the calculations show that the ventilation system using clean air heat pump technology can save up to 42% of energy cost in winter compared to the conventional ventilation system. The energy saving in summer can be as high as 66% for the ventilation system with humidity control and 9% for the ventilation system without the requirement of humidity control. Since the Danish summer climate is very mild, over 80% of the yearly energy consumption for ventilation is used during winter season. It is, therefore, estimated that more than 35% annual energy saving for ventilation is expected in Denmark using the clean air heat pump ventilation technology. For the mild hot climate, e.g. the Italian climate, the calculations show that up to 63% of the energy saving can be achieved in summer season. For the winter mode, 17% reduction of the energy cost can be expected for the domestic use. For industrial use, the energy cost of the clean air heat pump may not be favourable due to the industrial price of gas in Italy is

  4. World distribution of commercial energy consumption. [Period 1950-1975

    Energy Technology Data Exchange (ETDEWEB)

    Jacmart, M.C.; Arditi, M.; Arditi, I.

    1979-09-01

    Inequality in the world distribution of income has been widely studied. A related problem is the worldwide maldistribution of per capita energy consumption. This article examines trends in the international distribution of energy use over the period 1950 to 1975. Lorenz curves are used to show that during this 25-year period inequalities in energy consumption have decreaed slowly. Most of this redistribution has however occurred among countries in the top 30% of energy consumers. Of the remaining countries only China has significantly increased its per capita consumption. If China is excluded, 60% of the world's population accounts for only 10% of total world consumption. This imbalance has remained unaltered since 1950.

  5. Energy Drink Consumption Practices of Young People in Bahrain

    Directory of Open Access Journals (Sweden)

    Maryam M. Nassaif

    2016-03-01

    Conclusion: Energy drink consumption is a popular socialization activity among adolescents of Bahrain. The potential health risks necessitates the need for novel health promotion strategies and advocacy efforts for healthy hydration practices.

  6. Investigating energy consumption of coastal vacation rental homes

    Science.gov (United States)

    Myers, Sam

    In 2007, vacation rental properties in the United States accounted for more than 22% of the domestic lodging market. These properties are a unique segment of the lodging industry due to their residential design and commercial use. Coastal vacation rental properties represent the largest supply, demand and value of the nation's vacation rental supply. In the case of North Carolina's Outer Banks, tourism is the area's largest source of income, with vacation real estate agencies being the largest accommodation provider. This study uses a multiple regression analysis to investigate the energy consumption of 30 vacation rental homes on Hatteras Island. Hatteras Island's abundant supply of vacation rental homes provided a diverse sample to study energy consumption with a wide range of houses regarding size, age, and location. Since very little research has been conducted on the energy consumption of vacation rental homes, this study aims to contribute detailed information regarding the energy consumption of unique accommodation sector.

  7. Minimizing energy consumption of accelerators and storage ring facilities

    Energy Technology Data Exchange (ETDEWEB)

    Barton, M. Q.; Gerke, H.; Loew, G. A.; Lundy, R. A.; Schnell, W.

    1980-01-01

    The discussion of energy usage falls naturally into three parts. The first is a review of what the problem is, the second is a description of steps that can be taken to conserve energy at existing facilities, and the third is a review of the implications of energy consumption on future facilities.

  8. On-site energy consumption at softwood sawmills in Montana

    Science.gov (United States)

    Dan Loeffler; Nathaniel Anderson; Todd A. Morgan; Colin B. Sorenson

    2016-01-01

    Total on-site energy requirements for wood product manufacturing are generally not well understood or publicly available, particularly at subregional scales, such as the state level. This article uses a mail survey of softwood sawmills in Montana to develop a profile of all on-site energy consumption. Energy use is delineated by fuel type on a production basis...

  9. Moisture buffering phenomenon and its impact on building energy consumption

    DEFF Research Database (Denmark)

    Zhang, Mingjie; Qin, Menghao; Rode, Carsten

    2017-01-01

    buffering on building energy consumption in different climate conditions is assessed by using numerical simulations. The results show that the potential energy saving rate could be up to 25–30% when using proper hygroscopic materials in the test building in temperate climates and semi-arid climates. Finally......, the relationship between MBV and potential energy saving rate is also discussed....

  10. Novel simulated moving-bed method for reduced solvent consumption.

    Science.gov (United States)

    Jensen, T B; Reijns, T G; Billiet, H A; van der Wielen, L A

    2000-03-24

    Simulated moving-bed (SMB) chromatography is attractive for reducing sorbent and solvent consumption relative to fixed-bed systems. In this contribution, we describe a novel and versatile method for further reducing solvent consumption in the case of reversed-phase chromatography. The method is based on the variation of the distribution coefficients of solutes to be separated upon varying the composition of a multi-component mobile phase. If the solvent strength of the desorbent is set higher than the solvent strength of the feed, the components will have smaller distribution coefficients in the extraction section of the SMB and hence will be more easily eluted. This will result in a lower desorbent flow and possibly also in a shorter desorbent zone, and, ultimately, in more concentrated products. The so-called "Triangle-method" by Storti et al. [AIChE J., 39 (1993) 471] to obtain the region of complete separation, is extended for this novel SMB method. Theoretical evaluation of the proposed methodology supports the anticipated solvent reduction relative to fixed-bed RP-HPLC for the cases of the purification of the polyketide antibiotic nystatin and the separation of bovine insulin from porcine insulin.

  11. Occupants Influence on the Energy Consumption of Danish Domestic Buildings

    DEFF Research Database (Denmark)

    Larsen, Tine Steen; Knudsen, Henrik Nellemose; Kanstrup, Anne Marie

    This report is one of the results from the project “Occupants influence on the energy consumption of Danish domestic buildings – Phase 1”, which is partly funded by EUDP (Journalnr.: 64009-0248, Programområde: Energieffektivisering) The report provides state-of-the-art reviews within the various...... disciplines represented in the project by the project members, which all represent areas that relate to the title on occupants influence on the energy consumption....

  12. Analysis of energy consumption in single family houses

    DEFF Research Database (Denmark)

    Nielsen, Henrik Aalborg; Mortensen, Stig Bousgaard; Bacher, Peder

    2010-01-01

    This article deals with estimation of the thermal characteristics of single family houses based on measurements of energy consumption and climate. The thermal characteristics includes the response of the building to changes in temperature (UA-value), solar radiation (gA-value), and wind (w...... to estimate the dynamic effects averages with a sample period around 4 hours are required. Also, it is beneficial to use measurements of the total energy consumption (heat and electricity). However, in most cases it results in adequate estimates if only the heat consumption is used as the response variable...

  13. Analysis of energy consumption in single family houses

    DEFF Research Database (Denmark)

    Nielsen, Henrik Aalborg; Mortensen, Stig Bousgaard; Bacher, Peder

    2010-01-01

    This article deals with estimation of the thermal characteristics of single family houses based on measurements of energy consumption and climate. The thermal characteristics includes the response of the building to changes in temperature (UA-value), solar radiation (gA-value), and wind (w...... to estimate the dynamic effects averages with a sample period around 4 hours are required. Also, it is beneficial to use measurements of the total energy consumption (heat and electricity). However, in most cases it results in adequate estimates if only the heat consumption is used as the response variable...

  14. Specific energy consumption in microwave drying of garlic cloves

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, G.P. [Department of Processing and Food Engineering, College of Technology and Agricultural Engineering, Udaipur 313 001, Rajasthan (India); Prasad, Suresh [Agricultural and Food Engineering Department, Indian Institute of Technology, Kharagpur 721 302 (India)

    2006-09-15

    The convective and microwave-convective drying of garlic cloves was carried out in a laboratory scale microwave dryer, which was developed for this purpose. The specific energy consumption involved in the two drying processes was estimated from the energy supplied to the various components of the dryer during the drying period. The specific energy consumption was computed by dividing the total energy supplied by amount of water removed during the drying process. The specific energy consumption in convective drying of garlic cloves at 70{sup o}C temperature and 1.0m/s air velocity was estimated as 85.45MJ/kg of water evaporated. The increase in air velocity increased the energy consumption. The specific energy consumption at 40W of microwave power output, 70{sup o}C air temperature and 1.0m/s air velocity was 26.32MJ/kg of water removed, resulting in about a 70% energy saving as compared to convective drying processes. The drying time increased with increase in air velocity in microwave-convective drying process; a trend reverse to what was observed in convective drying process of garlic cloves. (author)

  15. Embodied energy consumption and carbon emissions evaluation for urban industrial structure optimization

    Science.gov (United States)

    Ji, Xi; Chen, Zhanming; Li, Jinkai

    2014-03-01

    Cities are the main material processors associated with industrialization. The development of urban production based on fossil fuels is the major contributor to the rise of greenhouse gas density, and to global warming. The concept of urban industrial structure optimization is considered to be a solution to urban sustainable development and global climate issues. Enforcing energy conservation and reducing carbon emissions are playing key roles in addressing these issues. As such, quantitative accounting and the evaluation of energy consumption and corresponding carbon emissions, which are by-products of urban production, are critical, in order to discover potential opportunities to save energy and to reduce emissions. Conventional evaluation indicators, such as "energy consumption per unit output value" and "emissions per unit output value", are concerned with immediate consumptions and emissions; while the indirect consumptions and emissions that occur throughout the supply chain are ignored. This does not support the optimization of the overall urban industrial system. To present a systematic evaluation framework for cities, this study constructs new evaluation indicators, based on the concepts of "embodied energy" and "embodied carbon emissions", which take both the immediate and indirect effects of energy consumption and emissions into account. Taking Beijing as a case, conventional evaluation indicators are compared with the newly constructed ones. Results show that the energy consumption and emissions of urban industries are represented better by the new indicators than by conventional indicators, and provide useful information for urban industrial structure optimization.

  16. Impact of Window Films on the Overall Energy Consumption of Existing UK Hotel Buildings

    Directory of Open Access Journals (Sweden)

    Ali Bahadori-Jahromi

    2017-05-01

    Full Text Available Recently, considerable attention has justifiably been directed towards energy savings in buildings as they account for up to 20–40% of total energy consumption in developed countries. In the United Kingdom, studies have revealed that buildings’ CO2 emissions for account for at least 43% of total emissions. Window panels are a major component of the building fabric with considerable influence on the façade energy performance and are accountable for up to 60% of a building’s overall energy loss. Therefore, the thermal performance of glazing materials is an important issue within the built environment. This work evaluates the impact of solar window films on the overall energy consumption of an existing commercial building via the use of a case study U.K. hotel and TAS dynamic simulation software. The study results demonstrated that the impact of window films on the overall energy consumption of the case study hotel is approximately 2%. However, an evaluation of various overall energy consumption components showed that the window films reduce the annual total cooling energy consumption by up to 35% along with a marginal 2% increase in the annual total heating energy consumption. They can also provide overall cost and CO2 emissions savings of up to 3%.

  17. Energy Consumption and Greenhouse Gas Emission Evaluation Scenarios of Mea Fah Luang University

    Directory of Open Access Journals (Sweden)

    Laingoen Onn

    2016-01-01

    Full Text Available In Thailand, quantity of the educational institutes building shared one fourth of commercial building. Among the energy consumption and conservation in the building in Thailand are mostly study in typical office and resident building. Mea Fah Luang University (MFU was selected to represent the educational institutes building where located in the northern part of Thailand. The average temperature in the northern is lower than other parts of Thailand. This study was firstly collected the data about quantity and behaviour of energy consumption in MFU based on the energy audit handbook. Although MFU is located in the northern of Thailand. The highest energy consumption is in the part of air condition. When the energy efficiency appliances and energy conservation building are implemented, the cost of energy will be saved around 15,867,960 Baht. Furthermore, the greenhouse gas emission is also reduced about 72.01 kg CO2, equivalent/m2/year.

  18. Energy-Filtered Tunnel Transistor: A New Device Concept Toward Extremely-Low Energy Consumption Electronics

    Science.gov (United States)

    2015-12-17

    New Device Concept Toward Extremely-Low Energy Consumption Electronics 5a. CONTRACT NUMBER 5b. GRANT NUMBER N00014-12-1-0492 5c. PROGRAM... energy consumption transistors. We have experimentally demonstrated, for the first time, that a quantum well energy level can filter out energetic...Concept Toward Extremely-Low Energy Consumption Electronics (Grant No: N00014-12-1-0492) PI: Seong Jin Koh Department of Materials Science and

  19. Energy consumption in the food chain - Comparing alternative options in food production and consumption

    NARCIS (Netherlands)

    Dutilh, CE; Kramer, KJ

    Energy consumption in the various stages of the food chain, provides a reasonable indicator for the environmental impact in the production of food. This paper provides specific information on the energy requirement for the main alternatives in each production stage, which should allow the

  20. Energy consumption in the food chain - Comparing alternative options in food production and consumption

    NARCIS (Netherlands)

    Dutilh, CE; Kramer, KJ

    2000-01-01

    Energy consumption in the various stages of the food chain, provides a reasonable indicator for the environmental impact in the production of food. This paper provides specific information on the energy requirement for the main alternatives in each production stage, which should allow the identifica

  1. The energy consumption of control systems; Het energiegebruik van regelinstallaties

    Energy Technology Data Exchange (ETDEWEB)

    Van Gulik, A.R.; De Wildt, M.G. [Grontmij Nederland, Amersfoort (Netherlands)

    2013-07-15

    Control systems for e.g. indoor climate and illumination are essential in modern building services, and useful for comfort or energy conservation. Energy conservation is of course an important aim, but what is the energy consumption of the control systems? Is the consumption higher than the savings? This question was subject of a comprehensive study, with measurements and simulation calculations. It can be concluded that the energy consumption of control installation for spaces is substantial [Dutch] Regelinstallaties voor bijvoorbeeld klimaatregeling, verlichtingsregeling en domotica zijn niet meer weg te denken uit de moderne installatietechniek, of ze nu dienen voor comfort, gemak of energiebesparing. Maar hoeveel energie gebruiken deze installaties eigenlijk? Voor ontwerpers blijkt dit helemaal geen issue te zijn terwijl adviseurs, installateurs en zelfs fabrikanten zeggen hiervan geen idee te hebben. Door metingen en het gebruik van berekeningsmodellen is vastgesteld wat het energiegebruik van regelinstallaties op jaarbasis is. Dit blijkt substantieel te zijn, maar er zijn mogelijkheden om het gebruik te reduceren.

  2. Carbon dioxide emissions, output, and energy consumption categories in Algeria.

    Science.gov (United States)

    Amri, Fethi

    2017-06-01

    This study examines the relation between CO2 emissions, income, non-renewable, and renewable energy consumption in Algeria during the period extending from 1980 to 2011. Our work gives particular attention to the validity of environmental Kuznets curve (EKC) hypothesis. The autoregressive distributed lag (ARDL) with break point method outcome demonstrates the positive effect of non-renewable type of energy on CO2 emissions consumption. On the contrary, the results reveal an insignificant effect of renewable energy on environment improvement. Moreover, the results accept the existence of EKC hypothesis but the highest gross domestic product value in logarithm scale of our data is inferior to the estimated turning point. Consequently, policy-makers in Algeria should expand the ratio of renewable energy and should decrease the quota of non-renewable energy consumption.

  3. Mobile Location Sharing: An Energy Consumption Study

    OpenAIRE

    Vergara Alonso, Ekhiotz Jon; Prihodko, Mihails; Nadjm-Tehrani, Simin

    2013-01-01

    The use of a mobile device's battery for frequent transmissions of position data in a location sharing application can be more expensive than the location retrieval itself. This is in part due to energy-agnostic application development and in part dependent on choice of protocols. This paper studies the lightweight Message Queuing Telemetry Transport protocol (MQTT) as an application layer protocol on top of the third generation cellular communication. The energy efficiency and amount of data...

  4. Production, consumption and research on solar energy

    DEFF Research Database (Denmark)

    Sanz-Casado, Elias; Lascurain-Sánchez, Maria Luisa; Serrano-Lopez, Antonio Eleazar

    2014-01-01

    An analysis of scientific publications on solar energy was conducted to determine whether public interest in the subject is mirrored by more intense research in the area. To this end, the research published by Spain and Germany, the two EU countries with the highest installed photovoltaic capacit...... intense. The main conclusion is the divergence in Germany and Spain between solar energy demand/output growth, being exponential, and the growth of research papers on the subject, which is linear...

  5. Energy consumptions per sector; Les consommations d'energie par secteur

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This document presents the energy consumption data of France per energy type and sector of use in the form of tables and graphics for the last decade and sometimes before: 1 - residential and tertiary sector: energy consumption per energy source, energy consumption per use (coal, heavy and domestic fuels, natural gas, LPG (butane, propane), electricity), comparison of the share of each energy source between 1973 and 2003, 20 years of space heating data in main dwellings (1982-2002), district heating networks from 1987 to 1997; 2 - transportation sector: fuel consumption of individual cars in France (1990-2003, 1990-2002, 1990-2001, 1987-1999), some indicators about the energy consumption in transports in France (2000-2001); 3 - industry sector: consumption of fuel substitutes in the cement industry in 2001, importance and limitations. (J.S.)

  6. An Ant Optimization Model for Unrelated Parallel Machine Scheduling with Energy Consumption and Total Tardiness

    Directory of Open Access Journals (Sweden)

    Peng Liang

    2015-01-01

    Full Text Available This research considers an unrelated parallel machine scheduling problem with energy consumption and total tardiness. This problem is compounded by two challenges: differences of unrelated parallel machines energy consumption and interaction between job assignments and machine state operations. To begin with, we establish a mathematical model for this problem. Then an ant optimization algorithm based on ATC heuristic rule (ATC-ACO is presented. Furthermore, optimal parameters of proposed algorithm are defined via Taguchi methods for generating test data. Finally, comparative experiments indicate the proposed ATC-ACO algorithm has better performance on minimizing energy consumption as well as total tardiness and the modified ATC heuristic rule is more effectively on reducing energy consumption.

  7. Estimating Energy Consumption of Transport Modes in China Using DEA

    Directory of Open Access Journals (Sweden)

    Weibin Lin

    2015-04-01

    Full Text Available The rapid growth of transport requirements in China will incur increasing transport energy demands and associated environmental pressures. In this paper, we employ a generalized data envelopment analysis (DEA to evaluate the relative energy efficiency of rail, road, aviation and water transport from 1971 to 2011 by considering the energy input and passenger-kilometers (PKM and freight ton-kilometers (TKM outputs. The results show that the optimal energy efficiencies observed in 2011 are for rail and water transport, with the opposite observed for the energy efficiencies of aviation and road transport. In addition, we extend the DEA model to estimate future transport energy consumption in China. If each transport mode in 2020 is optimized throughout the observed period, the national transport energy consumption in 2020 will reach 497,701 kilotons coal equivalent (ktce, whereas the annual growth rate from 2011 to 2020 will be 5.7%. Assuming that efficiency improvements occur in this period, the estimated national transport energy consumption in 2020 will be 443,126 ktce, whereas the annual growth rate from 2011 to 2020 will be 4.4%, which is still higher than that of the national total energy consumption (3.8%.

  8. Mapping water consumption for energy production around the Pacific Rim

    Science.gov (United States)

    Tidwell, Vincent; Moreland, Barbie

    2016-09-01

    World energy demand is projected to increase by more than a third by 2035 and with it the use of water to extract and process fuels and generate electricity. Management of this energy-water nexus requires a clear understanding of the inter-related demands of these resources as well as their regional distribution. Toward this need the fresh water consumed for energy production was mapped for almost 12 000 watersheds distributed across the 21-economies comprising the Asia-Pacific Economic Cooperation. Fresh water consumption was estimated for ten different sectors including thermoelectric and hydroelectric power; energy extraction including coal, oil, natural gas, uranium and unconventional oil/gas; energy processing including oil and biofuels; and biofuel feedstock irrigation. These measures of water consumption were put in context by drawing comparison with published measures of water risk. In total 791 watersheds (32%) of the 2511 watersheds where energy related water consumption occurred were also characterized by high to extreme water risk, these watersheds were designated as being at energy-water risk. For six economies watersheds at energy-water risk represented half or more of all basins where energy related water consumption occurred, while four additional economies exceeded 30%.

  9. Energy consumption and CO2 emissions in Iran, 2025.

    Science.gov (United States)

    Mirzaei, Maryam; Bekri, Mahmoud

    2017-04-01

    Climate change and global warming as the key human societies' threats are essentially associated with energy consumption and CO2 emissions. A system dynamic model was developed in this study to model the energy consumption and CO2 emission trends for Iran over 2000-2025. Energy policy factors are considered in analyzing the impact of different energy consumption factors on environmental quality. The simulation results show that the total energy consumption is predicted to reach 2150 by 2025, while that value in 2010 is 1910, which increased by 4.3% yearly. Accordingly, the total CO2 emissions in 2025 will reach 985million tonnes, which shows about 5% increase yearly. Furthermore, we constructed policy scenarios based on energy intensity reduction. The analysis show that CO2 emissions will decrease by 12.14% in 2025 compared to 2010 in the scenario of 5% energy intensity reduction, and 17.8% in the 10% energy intensity reduction scenario. The results obtained in this study provide substantial awareness regarding Irans future energy and CO2 emission outlines.

  10. Energy Drink Consumption: Beneficial and Adverse Health Effects

    OpenAIRE

    Alsunni, Ahmed Abdulrahman

    2015-01-01

    Consumption of energy drinks has been increasing dramatically in the last two decades, particularly amongst adolescents and young adults. Energy drinks are aggressively marketed with the claim that these products give an energy boost to improve physical and cognitive performance. However, studies supporting these claims are limited. In fact, several adverse health effects have been related to energy drink; this has raised the question of whether these beverages are safe. This review was carri...

  11. Circadian rhythm of energy expenditure and oxygen consumption.

    Science.gov (United States)

    Leuck, Marlene; Levandovski, Rosa; Harb, Ana; Quiles, Caroline; Hidalgo, Maria Paz

    2014-02-01

    This study aimed to evaluate the effect of continuous and intermittent methods of enteral nutrition (EN) administration on circadian rhythm. Thirty-four individuals, aged between 52 and 80 years, were fed through a nasoenteric tube. Fifteen individuals received a continuous infusion for 24 hours/d, and 19 received an intermittent infusion in comparable quantities, every 4 hours from 8:00 to 20:00. In each patient, 4 indirect calorimetric measurements were carried out over 24 hours (A: 7:30, B: 10:30, C: 14:30, and D: 21:30) for 3 days. Energy expenditure and oxygen consumption were significantly higher in the intermittent group than in the continuous group (1782 ± 862 vs 1478 ± 817 kcal/24 hours, P = .05; 257 125 vs 212 117 ml/min, P = .048, respectively). The intermittent group had higher levels of energy expenditure and oxygen consumption at all the measured time points compared with the continuous group. energy expenditure and oxygen consumption in both groups were significantly different throughout the day for 3 days. There is circadian rhythm variation of energy expenditure and oxygen consumption with continuous and intermittent infusion for EN. This suggests that only one indirect daily calorimetric measurement is not able to show the patient's true needs. Energy expenditure is higher at night with both food administration methods. Moreover, energy expenditure and oxygen consumption are higher with the intermittent administration method at all times.

  12. Consumption of energy drinks among physical education students.

    Science.gov (United States)

    Ballistreri, Martha Carmen; Corradi-Webster, Clarissa Mendonça

    2008-01-01

    This descriptive and cross-sectional study aimed to characterize the pattern of energy drinks consumption in a sample of physical education students through a self-applied questionnaire (socio-demographic data and characterization of consumption). Variables associated with consumption: gender, marital status, attending gym classes, athletic swim practice, and study in the morning. Consumption pattern (n=137): 2.2% once in their lives, 9.5% at least once in the last 12 months, 38% at least once in the last month, 39.4% six times or more in the last month, 10.9% 20 times or more in the last month. Justification for consumption: 54% to improve the taste of alcoholic drinks, 27.7% to extend their evening leisure periods, 13.9% to improve sports performance, 9.5% for stimulation, 8.8% enjoy the taste, 6.6% for curiosity and 4.4% to study. Of those who consumed energy drinks, 87.6% mixed it with alcohol, and 25.9% of the students reported they consume more alcohol when it is mixed with energy drinks. the consumption of energy drinks is associated to sports and drinking alcohol.

  13. Industrial relocation and energy consumption: Evidence from China

    Energy Technology Data Exchange (ETDEWEB)

    Zhao Xiaoli, E-mail: email99zxl@vip.sina.co [School of Economics and Business, North China Electric Power University, Beijing 102206 (China); Erb Institute for Global Sustainable Enterprise, University of Michigan, Ann Arbor, MI 48109 (United States); Yin Haitao, E-mail: htyin@sjtu.edu.c [Antai College of Economics and Management, Shanghai Jiao Tong University, Shanghai 200052 (China); Erb Institute for Global Sustainable Enterprise, University of Michigan, Ann Arbor, MI 48109 (United States)

    2011-05-15

    With economic development and the change of industrial structure, industrial relocation is an inevitable trend. In the process of industrial relocation, environmental externality and social cost could occur due to market failure and government failure. Little attention has been paid to this issue. In this paper, we address it with a theoretical analysis and an empirical investigation on the relationship between China's industrial relocation in the early 1990s and energy consumption which is the primary source of CO{sub 2} emission, an environmental externality that causes increasing concerns. The macro-policy analysis suggests that there would be a positive link between China's industrial relocation in the early 1990s and energy saving (and environmental externalities reduction). Using fixed-effect regression model and simulation method, we provide an empirical support to this argument. In order to further reduce environmental externalities and social cost in the process of industrial relocation, we provide policy suggestions as follows: First, strengthen the evaluation of environmental benefits/costs; Second, pay more attention to the coordinated social-economic development; Third, avoid long-lived investment in high-carbon infrastructure in areas with industries moved in; Fourth, address employment issue in the areas with industries moved out. - Research highlights: {yields} Little attention has been paid to the linkage between industrial relocation and environmental externality. {yields} Our macro-policy analysis suggests that there would be a positive link between China's industrial relocation in the early 1990s and energy saving (and environmental externalities reduction). {yields} Using fixed-effect regression model and simulation method, we find a positive link between China's industrial relocation in the early 1990s and energy saving. {yields} Policy suggestions to further reduce environmental externalities and social cost in the process

  14. Maximal Oxygen Consumption is Reduced in Aquaporin-1 Knockout Mice

    Directory of Open Access Journals (Sweden)

    Samer Al-Samir

    2016-08-01

    Full Text Available We have measured maximal oxygen consumption (V’O2,max of mice lacking one or two of the established mouse red-cell CO2 channels AQP1, AQP9 and Rhag. We intended to study whether these proteins, by acting as channels for O2, determine O2 exchange in the lung and in the periphery. We found that V’O2,max as determined by the Helox technique is reduced by ~ 16%, when AQP1 is knocked out, but not when AQP9 or Rhag are lacking. This figure holds for animals respiring normoxic as well as hypoxic gas mixtures. To see whether the reduction of V’O2,max is due to impaired O2 uptake in the lung, we measured carotid arterial O2 saturation (SO2 by pulse oximetry. Neither under normoxic (inspiratory O2 21% nor under hypoxic conditions (11% O2 is there a difference in SO2 between AQP1null and WT mice, suggesting that AQP1 is not critical for O2 uptake in the lung. The fact that the % reduction of V’O2,max is identical in normoxia and hypoxia indicates moreover that the limitation of V’O2,max is not due to an O2 diffusion problem, neither in the lung nor in the periphery. Instead, it appears likely that AQP1null animals exhibit a reduced V’O2,max due to the reduced wall thickness and muscle mass of the left ventricles of their hearts, as reported previously. We conclude that very likely the properties of the hearts of AQP1 knockout mice cause a reduced maximal cardiac output and thus cause a reduced V’O2,max, which constitutes a new phenotype of these mice.

  15. Exploring the energy consumption of lightweight blockciphers in FPGA

    DEFF Research Database (Denmark)

    Banik, Subhadeep; Bogdanov, Andrey; Regazzoni, Francesco

    2015-01-01

    . Concentrating on applications that require a number of parallel encryptions, we instantiate several designs on the target FPGA and we analyze how the energy consumption varies in each algorithm when changing the amount of unrolled rounds. Our results, obtained on the Xc6slx45t device of the Spartan6 family......, demonstrate that Present is the most energy efficient algorithm and that the relation between the energy consumption and the number of unrolled rounds measured on FPGA is similar to the one measured on dedicated hardware....

  16. Widening the scope? How intermediary actors can shape energy consumption

    DEFF Research Database (Denmark)

    Maneschi, Davide

    2013-01-01

    , socio-technical systems, governance in the water sector and, although limitedly, in the explanation of aspects related to consumption and energy use. Building on the framework given by the review, the paper presents a case study to provide a real-life example of how intermediaries can favor the more...... – influence energy consumption. This paper presents a review of the literature on intermediaries, providing an overview of their roles and contextualizing their functions in energy efficiency improvements. The review shows how the concept of intermediaries has been used in research dealing with innovation...

  17. An analytical model for Energy Consumption in Y-MAC Protocol

    Directory of Open Access Journals (Sweden)

    Ramchand V

    2012-01-01

    Full Text Available This paper presents an analytical model for estimating energy consumption in Y-MAC protocol for Wireless Sensor Networks (WSN. This protocol has been proposed to reduce the energy consumption of a node when involved in unicast or broadcast transmission of frames. In WSN a node consumes energy in transmitting and receiving of data, listening transmissions of other nodes, and in sleep mode. Therefore, energy consumption of a node has been estimated by adding up the energy consumed in each of the above activities. This has been achieved by estimating the time spent in each activity by a node. The protocol has been simulated using MATLAB. The simulation results show comparable energy savings as compared to Y-MAC protocol, therefore, the model validates the existing protocol.

  18. Consumption Behavior Analytics-Aided Energy Forecasting and Dispatch

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yingchen [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Yang, Rui [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jiang, Huaiguang [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Kaiqing [University of Illinois Urbana-Champaign; Zhang, Jun Jason [University of Denver

    2017-08-17

    For decades, electricity customers have been treated as mere recipients of electricity in vertically integrated power systems. However, as customers have widely adopted distributed energy resources and other forms of customer participation in active dispatch (such as demand response) have taken shape, the value of mining knowledge from customer behavior patterns and using it for power system operation is increasing. Further, the variability of renewable energy resources has been considered a liability to the grid. However, electricity consumption has shown the same level of variability and uncertainty, and this is sometimes overlooked. This article investigates data analytics and forecasting methods to identify correlations between electricity consumption behavior and distributed photovoltaic (PV) output. The forecasting results feed into a predictive energy management system that optimizes energy consumption in the near future to balance customer demand and power system needs.

  19. Energy Consumption Information Services for Smart Home Inhabitants

    Science.gov (United States)

    Schwanzer, Michael; Fensel, Anna

    We investigate services giving users an adequate insight on his or her energy consumption habits in order to optimize it in the long run. The explored energy awareness services are addressed to inhabitants of smart homes, equipped with smart meters, advanced communication facilities, sensors and actuators. To analyze the potential of such services, a game at a social network Facebook has been designed and implemented, and the information about players' responses and interactions within the game environment has been collected and analyzed. The players have had their virtual home energy usage visualized in different ways, and had to optimize the energy consumption basing on their own perceptions of the consumption information. Evaluations reveal, in particular, that users are specifically responsive to information shown as a real-time graph and as costs in Euro, and are able to produce and share with each other policies for managing their smart home environments.

  20. Changing organizational energy consumption behaviour through comparative feedback

    NARCIS (Netherlands)

    Siero, F.W.; Bakker, A.B.; Dekker, G.B; van den Burg, T.C

    1996-01-01

    The differential effects of two forms of feedback on energy consumption behaviour were examined in two units of a metallurgical company. In one unit, employees received information about energy conservation, had to set goals and received feedback on their own conservation behaviour. The same procedu

  1. A realistic dynamic blower energy consumption model for wastewater applications.

    Science.gov (United States)

    Amerlinck, Y; De Keyser, W; Urchegui, G; Nopens, I

    2016-10-01

    At wastewater treatment plants (WWTPs) aeration is the largest energy consumer. This high energy consumption requires an accurate assessment in view of plant optimization. Despite the ever increasing detail in process models, models for energy production still lack detail to enable a global optimization of WWTPs. A new dynamic model for a more accurate prediction of aeration energy costs in activated sludge systems, equipped with submerged air distributing diffusers (producing coarse or fine bubbles) connected via piping to blowers, has been developed and demonstrated. This paper addresses the model structure, its calibration and application to the WWTP of Mekolalde (Spain). The new model proved to give an accurate prediction of the real energy consumption by the blowers and captures the trends better than the constant average power consumption models currently being used. This enhanced prediction of energy peak demand, which dominates the price setting of energy, illustrates that the dynamic model is preferably used in multi-criteria optimization exercises for minimizing the energy consumption.

  2. Electricity's "Disappearing Act": Understanding Energy Consumption and Phantom Loads

    Science.gov (United States)

    Rusk, Bryan; Mahfouz, Tarek; Jones, James

    2011-01-01

    Energy exists in many forms and can be converted from one form to another. However, this conversion is not 100% efficient, and energy is lost in the form of heat during conversion. In addition, approximately 6% of the monthly consumption of the average American household's electricity is neither lost nor used by its residents. These losses are…

  3. Electricity's "Disappearing Act": Understanding Energy Consumption and Phantom Loads

    Science.gov (United States)

    Rusk, Bryan; Mahfouz, Tarek; Jones, James

    2011-01-01

    Energy exists in many forms and can be converted from one form to another. However, this conversion is not 100% efficient, and energy is lost in the form of heat during conversion. In addition, approximately 6% of the monthly consumption of the average American household's electricity is neither lost nor used by its residents. These losses are…

  4. Energy Consumption and Net CO2 Sequestration of Aqueous Mineral Carbonation

    NARCIS (Netherlands)

    Huijgen, W.J.J.; Comans, R.N.J.; Witkamp, G.J.; Ruijg, G.J.

    2006-01-01

    Aqueous mineral carbonation is a potentially attractive sequestration technology to reduce CO2 emissions. The energy consumption of this technology, however, reduces the net amount of CO2 sequestered. Therefore, the energetic CO2 sequestration efficiency of aqueous mineral carbonation was studied in

  5. Energy Consumption and Net CO2 Sequestration of Aqueous Mineral Carbonation

    NARCIS (Netherlands)

    Huijgen, W.J.J.; Comans, R.N.J.; Witkamp, G.J.; Ruijg, G.J.

    2006-01-01

    Aqueous mineral carbonation is a potentially attractive sequestration technology to reduce CO2 emissions. The energy consumption of this technology, however, reduces the net amount of CO2 sequestered. Therefore, the energetic CO2 sequestration efficiency of aqueous mineral carbonation was studied in

  6. Energy balance of forage consumption by phyllophagous insects: optimization model

    Directory of Open Access Journals (Sweden)

    O. V. Tarasova

    2015-06-01

    Full Text Available The model of optimal food consumption by phytophagous insects proposed, in which the metabolic costs are presented in the form of two components – the cost of food utilization and costs for proper metabolism of the individuals. Two measures were introduced – the «price» of food conversion and the «price» of biomass synthesis of individuals to assess the effectiveness of food consumption by caterpillars. The proposed approach to the description of food consumption by insects provides the exact solutions of the equation of energy balance of food consumption and determining the effectiveness of consumption and the risk of death of the individual. Experiments on larvae’s feeding in laboratory conditions were carried out to verify the model. Caterpillars of Aporia crataegi L. (Lepidoptera, Pieridae were the research subjects. Supply­demand balance, calculated value of the environmental price of consumption and efficiency of food consumption for each individual were determined from experimental data. It was found that the fertility of the female does not depend on the weight of food consumed by it, but is linearly dependent on the food consumption efficiency index. The greater the efficiency of food consumption by an individual, the higher its fertility. The data obtained in the course of experiments on the feeding caterpillars Aporia crataegi were compared with the data presented in the works of other authors and counted in the proposed model of consumption. Calculations allowed estimation of the critical value of food conversion price below which the energy balance is negative and the existence of an individual is not possible.

  7. The efficiency of orthotic interventions on energy consumption in paraplegic patients: a literature review.

    Science.gov (United States)

    Arazpour, M; Samadian, M; Bahramizadeh, M; Joghtaei, M; Maleki, M; Ahmadi Bani, M; Hutchins, S W

    2015-01-20

    Study design:This is a systematic literature review.Objectives:Different types of orthoses have been developed to enable and facilitate ambulation in individuals with paraplegia. However, their effect on energy consumption while ambulating is not clear. The objective of this review was to compare the energy expenditure required to walk with these devices.Methods:Using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) method, and based on selected keywords and their composition according to the Population Intervention Comparison Outcome (PICO) method, a search was performed in Science Direct, Google Scholar, Scopus, Web of Knowledge and PubMed databases. The searches were restricted to papers published in the English language and were conducted during February 2014; the last access to the database was on 25 February 2014. A total of 24 articles were chosen for final evaluation.Results:Hybrid orthoses reduce energy consumption compared with mechanical orthoses when used for walking by paraplegic patients. The isocentric reciprocating gait orthosis has been shown to be more effective than other reciprocating orthoses in reducing energy consumption. Energy consumption when walking with powered orthoses (PO) and hybrid orthoses was also reduced compared with when walking with conventional orthoses.Conclusions:The hybrid orthoses and PO could be effective alternatives in rehabilitation for spinal cord injury patients to help improve the energy consumption.Spinal Cord advance online publication, 20 January 2015; doi:10.1038/sc.2014.227.

  8. Energy consumption maps for quaternary distillation sequences

    DEFF Research Database (Denmark)

    Gomez-Castro, F.I.; Ramírez-Vallejo, N.E.; Segovia-Hernandez, J.G.

    2016-01-01

    of the solutions space. For the separation of ternary mixtures, Tedder and Rudd (1978) presented a composition map for which thermally coupled systems allowed energy savings. However, the scenario is different for quaternary mixtures, since no similar information is available. Therefore, in this work, energy...... be generated for the separation of multicomponent mixtures. This fact is an advantage, since a wide portfolio of alternatives can be used to separate a specific mixture; however, this is also a disadvantage since a lot of alternatives must be explored in order to find the optimal one. The optimal configuration......, for a given mixture, depends on the nature of the mixture, usually quantified for ternary mixtures through the ease of separation index (ESI), and also on the feed composition. As can be noticed, the size of the design and optimization problem increases when these variables are considered in the generation...

  9. Study on energy consumption evaluation of mountainous highway based on LCA

    Science.gov (United States)

    Fei, Lunlin; Zhang, Qi; Xie, Yongqing

    2017-06-01

    For the system to understand the road construction energy consumption process, this paper selects a typical mountainous highway in the south, using the theory and method of Life Cycle Assessment (LCA) to quantitatively study the energy consumption of the whole process of highway raw materials production, construction and operation. The results show that the energy consumption in the raw material production stage is the highest, followed by the highway operation and construction stage. The energy consumption per unit of tunnel engineering, bridge engineering, roadbed engineering and pavement engineering in the construction phase are 2279.00 tce, 1718.07 tce, 542.19 tce and 34.02 tce, and in operational phase, 85.44% of electricity consumption comes from tunnel ventilation and lighting. Therefore, in the bridge and tunnel construction process, we should promote energy-saving innovation of the construction technology and mechanical equipment, and further strengthen the research and development of tunnel ventilation, lighting energy-saving equipment and intelligent control technology, which will help significantly reduce the energy consumption and greenhouse gas emissions of the life cycle of highway.

  10. Energy substitution to reduce carbon dioxide emission in China

    Energy Technology Data Exchange (ETDEWEB)

    Jinping Huang (Beijing Economic Research Inst. of Water Resources and Electric Power (BERI), BJ (China))

    1993-03-01

    Energy consumption per capita in China is very low, less than one-half of the average level of the world. But China has a large population and coal consumption dominates total energy consumption (the share of coal was 76% in 1989). Therefore, the amount of CO[sub 2] emitted is very large (11% of the total world emission in 1990). Many people are concerned about what measures can be taken to reduce CO[sub 2] emission in China. Proposed measures include energy-efficiency improvement and energy substitution. Energy substitution is one the most effective measures of reducing CO[sub 2] emission in China. We give a detailed analysis of the exploitable potential of hydropower, nuclear power and the new energy sources (including solar, wind, geothermal, and tidal energy) from 1990 to 2020. Estimated reductions in CO[sub 2] emission due to enhanced use of non-fossil energy are also given. About 330 x 10[sup 6] tce (we use for coal 7000 kcal/kgce) of non-fossil energy will be produced and about 239 x 10[sup 6] mt of C can be eliminated in 2020 (about 38% of China's total CO[sub 2] emission in 1990). (author)

  11. Commercial-sector energy-consumption data-base-development project. Volume III. Analysis of energy consumption in office buildings

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-04-01

    Results are presented of an effort to develop comprehensive and reliable energy consumption data for office buildings. A survey was conducted of readily available energy consumption data and the literature that describes the factors which drive energy use in such buildings was analyzed. Information on heating, ventilating, and air conditioning (HVAC) systems was assembled. A number of building energy use simulation programs were reviewed to determine their suitability for estimating energy consumption by function and the effects of tradeoffs in building design and operating parameters on building energy use. Simulations using the AXCESS program were conducted. The 1975 data base of the Building Owners and Managers Association (BOMA) was obtained and analyzed. Data describing energy use on a regional and national basis were developed, and regression equations based on these were obtained. The ability of these equations to predict average energy use was then confirmed by applying them to four office buildings not in the BOMA data base. A number of proposals for the further improvement of the equations were developed, including additional data collection. Specifically, the survey of actual and simulated data on a regional basis is reported in Section 2. HVAC systems are discussed in Sections 3 and 4. BOMA obtains annual data on about 1000 buildings covering such items as location, floor area, height, age, average occupancy rate, average number of employees, types of tenants, type of air conditioning, and energy consumption by fuel and the description and analyses of the BOMA data are presented in Sections 5 and 6.

  12. URBAN FEATURES AND ENERGY CONSUMPTION AT LOCAL LEVEL

    Directory of Open Access Journals (Sweden)

    Ali Soltani

    2012-12-01

    Full Text Available There has been a growing interest in discovering the human effects on the environment and energy consumption in recent decades. It is estimated that the share of energy consumed in transportation and housing systems are around 20 and 30 percent of total energy consumption respectively. Furthermore, the residential greenhouse emissions depend on urban form and structure. This paper explores the effects of urban features on residential energy consumption at neighborhood level using data collected through household questionnaire (n=140. Two residential districts in metropolitan Shiraz, south of Iran, were selected as case study areas. Different features of two areas were compared including building density, typology, housing location, parcel size, floor area and construction materials. Ordinary linear regression was used to discover the impact of explanatory variables on energy consumption. It was found that some physical variables such as parcel size, setback and number of floors played significant roles in explaining the variances exist in energy use level. The results can be used by governmental agencies to modify land use policies and subdivision rules in hope of saving energy and achieving a sustainable community.

  13. Energy consumption analysis for a single screw extruder

    Energy Technology Data Exchange (ETDEWEB)

    Deng, Jing; Harkin-Jones, Eileen; Price, Mark; Karnachi, Nayeem [Queen' s Univ., Belfast (United Kingdom). School of Mechanical and Aerospace Engineering; Li, Kang [Queen' s Univ., Belfast (United Kingdom). School of Electronics, Electrical Engineering and Computer Science; Fei, Minrui [Shanghai Univ. (China). School of Mechatronic Engineering and Automation

    2013-07-01

    Polymer extrusion is regarded as an energy intensive production process, the real-time monitoring of both thermal energy and motor drive energy consumption becomes necessary for the development of energy efficient management system. The use of power meter is a simple and easy way to achieve this, however the cost sometimes can be high. Mathematical models based on the process settings provide an affordable alternative, but the resultant models cannot be easily extended to other extruders with different geometry. In this paper, simple and accurate energy real-time monitoring methods are developed for the analysis of energy consumption of the thermal heating and motor drive respectively. This is achieved by looking inside the controller, and use the control variables to calculate the power consumption. The developed methods are then adopted to study the effects of operating settings on the energy efficiency. These include the barrel heating temperature, water cooling temperature, and screw speed. The experimental results on Killion KTS-100 extruder show that the barrel heating temperature has a negative effect on energy efficiency, while the water cooling setting affects the energy efficiency positively but insignificantly. Undoubtedly, screw speed has the most significant effect on energy efficiency.

  14. A survey of energy drink consumption patterns among college students

    Directory of Open Access Journals (Sweden)

    Carpenter-Aeby Tracy

    2007-10-01

    Full Text Available Abstract Background Energy drink consumption has continued to gain in popularity since the 1997 debut of Red Bull, the current leader in the energy drink market. Although energy drinks are targeted to young adult consumers, there has been little research regarding energy drink consumption patterns among college students in the United States. The purpose of this study was to determine energy drink consumption patterns among college students, prevalence and frequency of energy drink use for six situations, namely for insufficient sleep, to increase energy (in general, while studying, driving long periods of time, drinking with alcohol while partying, and to treat a hangover, and prevalence of adverse side effects and energy drink use dose effects among college energy drink users. Methods Based on the responses from a 32 member college student focus group and a field test, a 19 item survey was used to assess energy drink consumption patterns of 496 randomly surveyed college students attending a state university in the Central Atlantic region of the United States. Results Fifty one percent of participants (n = 253 reported consuming greater than one energy drink each month in an average month for the current semester (defined as energy drink user. The majority of users consumed energy drinks for insufficient sleep (67%, to increase energy (65%, and to drink with alcohol while partying (54%. The majority of users consumed one energy drink to treat most situations although using three or more was a common practice to drink with alcohol while partying (49%. Weekly jolt and crash episodes were experienced by 29% of users, 22% reported ever having headaches, and 19% heart palpitations from consuming energy drinks. There was a significant dose effect only for jolt and crash episodes. Conclusion Using energy drinks is a popular practice among college students for a variety of situations. Although for the majority of situations assessed, users consumed one

  15. Energy consumption by gender in some European countries

    Energy Technology Data Exchange (ETDEWEB)

    Raety, R.; Carlsson-Kanyama, A. [Swedish Defence Research Agency, FOI, Stockholm (Sweden)

    2010-01-15

    Household total energy use has been estimated in numerous studies in recent decades and differences have mainly been explained by levels of income/expenditure. Studies of gender consumption patterns show that men eat more meat than women and drive longer distances, potentially leading to higher total energy use by men. In this study we calculated the total energy use for male and female consumption patterns in four European countries (Germany, Norway, Greece and Sweden) by studying single households. Significant differences in total energy use were found in two countries, Greece and Sweden. The largest differences found between men and women were for travel and eating out, alcohol and tobacco, where men used much more energy than women. We suggest that these findings are policy relevant for the EU, which aims to mainstream gender issues into all activities and to lower its total energy use. (author)

  16. Estimating the Energy Consumption of Emerging Random Access Memory Technologies

    OpenAIRE

    Moreau, Magnus

    2013-01-01

    In this work, a model for estimating the energy consumption of different types ofrandom access memory(RAM) technologies, likely to be commercially available by2017, has been developed. The goal for this model has been to evaluate whichof the memory technologies that will be the most energy efficient in 2017. Thiswas done by building the model on the required energies to read or write a bit forthe different technologies. The memory technologies that have been modelled are:Dynamic RAM (DRAM), S...

  17. Specific energy consumption values for various refrigerated food cold stores

    OpenAIRE

    Evans, JA; Foster, AM; Huet, JM; Reinholdt, L.; Fikiin, K; Zilio, C; Houska, M; Landfeld, A; Bond, C.; Scheurs, M; Van Sambeeck, TWM

    2013-01-01

    Two benchmarking surveys were created to collect data on the performance of chilled, frozen and mixed (chilled and frozen stores operated from a single refrigeration system) food cold stores with the aim of identifying the major factors influencing energy consumption. The volume of the cold store was found to have the greatest relationship with energy use with none of the other factors collected having any significant impact on energy use. For chilled cold stores, 93% of the variation in ener...

  18. Data Acquisition and Transmission System for Building Energy Consumption Monitoring

    Directory of Open Access Journals (Sweden)

    Liang Zhao

    2013-01-01

    Full Text Available Building energy consumption monitoring and management system have been developed widely in China in order to gain the real-time data of energy consumption in buildings for analyzing it in the next state work. This paper describes a low-cost and small-sized collector based on the STM32 microcontroller, which can be placed in a building easily to implement the work of data acquisition, storage, and transmission. The collector gathers the electricity, water, heat, and energy consumption data through the RS485 field bus and stores the data into an SD card with mass storage, finally, using Internet to finish the communication and transmission to data server through TCP protocol. The collector has been used in application for two years, and the results show that the system is reliable and stable.

  19. China's Export Expansion, Export Structure and Energy Consumption

    Institute of Scientific and Technical Information of China (English)

    Lan Yisheng; Ning Xuemin

    2011-01-01

    Since the reform and opening up, China's export trade has maintained a rapid growth; meanwhile, China's energy consumption has been increasing sharply. "High export and high energy consumption" has become the feature of China's trade and economic development. In this paper, based on the input-output analysis approach, the authors have conducted an empirical study on the export trade and energy consumption of 21 trade industrial sectors. The results show that, China is a big net exporter of embodied energy. Assuming that the export growth rate of embodied energy maintains to be about 23.6%, the average annual growth rate of the past 32 years, and based on the input-output data of 2005, by 2030 China's net export of embodied energy would be over eight times more than the aggregate energy production, which is obviously infeasible. As a country of very low per capita en- ergy, China must change its export pattern, encourage or restrain the export of different industrial sectors according to their energy consumption intensity, and promote structural change of energy- efficient exported products, so as to achieve the sustainable development. Accordingly, the authors put forward some suggestions.

  20. Solow meets Leontief. Economic growth and energy consumption

    Energy Technology Data Exchange (ETDEWEB)

    Arbex, Marcelo; Perobelli, Fernando S. [Department of Economics, University of Windsor, Windsor, ON (Canada)

    2010-01-15

    This paper proposes a methodology that integrates a growth model with an input-output model to analyze the impacts of economic growth on the consumption of energy. The integration between the models is carried out by calibrating the growth module, which incorporates energetic inputs (renewable and nonrenewable) in the production function, and implementing shocks by the supply side (capital, labor, renewable and nonrenewable energy) in the input-output model. This allows us to verify the pattern of energy consumption for each sector in the input-output matrix. We apply this methodology to study the energy consumption of eleven economic sectors in Brazil, using data from the Brazilian National Accounts and Input-Output Matrix (IBGE) and the National Energy Report (BEN). We conduct experiments involving changes in technological progress growth rate, extraction and regeneration rates of both renewable and nonrenewable resources and population growth to analyze the impact of changes in the parameters of the model on the sectoral output growth rate and, consequently, on the consumption of energy in each economic sector. (author)

  1. Analysis of energy consumption for a passive house in Tlemcen (North Africa)

    Energy Technology Data Exchange (ETDEWEB)

    Boukli Hacene, M.A.; Chabane Sari, N.E.; Amara, S. [Materials and Renewable Energies Research Unit, University of Tlemcen (Algeria)], E-mail: amineboukli@yahoo.fr

    2011-07-01

    With the coming shortage of fossil fuels, it is important to develop innovative techniques that reduce both energy consumption and pollution at the same time. In Algeria, the residential sector is the highest energy consumer, accounting for 41% of the country's total consumption; this must be reduced. The aim of this study is to analyze the energy use of dwellings and find solutions to reduce it. The analysis was performed on a 100m2 plate surface house situated in Tlemcen conceived in R+2 stages. In addition, an ecological design was developed and analyzed to determine the savings which could be made. Results showed that significant reduction of energy use and environmental impacts can be achieved through an ecological design. This study demonstrated that the concept of the ecological house can be applied to Mediterranean climate regions and would result in better energy and environmental performance as well as cost savings over the years.

  2. Energy-drink consumption in college students and associated factors.

    Science.gov (United States)

    Attila, Sema; Çakir, Banu

    2011-03-01

    To investigate the frequency of energy-drink consumption and associated factors in a group of college students. A cross-sectional study was conducted in Hacettepe University (Ankara, Turkey) and included 439 students pursuing a career in medicine, sports, and arts. Only fourth-year students were approached. Data were collected using a self-administered standard questionnaire. In bivariate analyses, frequency of energy-drink consumption was higher in students of arts and sports and in those who did not have breakfast on a regular basis, ever smoked cigarettes, drank alcoholic beverages, and regularly engaged in sports compared with their counterparts. Many students who had "ever" tried an energy drink did so the first time because they wondered about its taste. Of regular users of energy drinks, reasons for using such drinks varied across the three selected groups of students and included obtaining getting energy, staying awake, boosting performance while doing sports, or mixing with alcoholic beverages. About 40% of all current users of energy drinks reported that they mixed those with alcoholic beverages. In multivariate analyses, statistically significant predictors of energy-drink consumption were faculty type, presence of any health insurance, use of alcoholic beverages, and monthly income, controlling for gender. Most students could not correctly define the ingredients of energy drinks or their potential hazardous health effects, and they could not distinguish energy and sports drinks when they were requested to select them from a list of commercial names of various drinks. Consumption of energy drinks, despite the variation in the reason for choosing such drinks, is quite common in college students. Awareness of university students of the ingredients and potential health hazards of energy drinks, in particular in mixing with alcoholic beverages, should be increased. Copyright © 2011. Published by Elsevier Inc.

  3. A simple forecasting model for industrial electric energy consumption

    Energy Technology Data Exchange (ETDEWEB)

    Al-Shehri, Abdallah [King Fahd Univ. of Petroleum and Minerals, Electrical Engineering Dept., Dhaharan (Saudi Arabia)

    2000-07-01

    A single-equation model is developed and employed for forecasting industrial electric energy consumption in the Saudi Consolidated Electric Company in the Eastern Province (SCECO-East) of Saudi Arabia. SCECO-East's industrial loads are composed mainly of oil-related and petrochemical industries. Even though industrial loads are generally characterised by their steadiness, the harsh weather conditions of the Eastern Province cause great variations in the industrial electric energy consumption at SCECO-East. The developed model reflects these variations. MATLAB is used to solve the model. (Author)

  4. Energy Consumption and Saving Analysis for Laser Engineered Net Shaping of Metal Powders

    Directory of Open Access Journals (Sweden)

    Zhichao Liu

    2016-09-01

    Full Text Available With the increasing awareness of environmental protection and sustainable manufacturing, the environmental impact of laser additive manufacturing (LAM technology has been attracting more and more attention. Aiming to quantitatively analyze the energy consumption and extract possible ways to save energy during the LAM process, this investigation studies the effects of input variables including laser power, scanning speed, and powder feed rate on the overall energy consumption during the laser deposition processes. Considering microhardness as a standard quality, the energy consumption of unit deposition volume (ECUDV, in J/mm3 is proposed as a measure for the average applied energy of the fabricated metal part. The potential energy-saving benefits of the ultrasonic vibration–assisted laser engineering net shaping (LENS process are also examined in this paper. The experimental results suggest that the theoretical and actual values of the energy consumption present different trends along with the same input variables. It is possible to reduce the energy consumption and, at the same time, maintain a good part quality and the optimal combination of the parameters referring to Inconel 718 as a material is laser power of 300 W, scanning speed of 8.47 mm/s and powder feed rate of 4 rpm. When the geometry shaping and microhardness are selected as evaluating criterions, American Iron and Steel Institute (AISI 4140 powder will cause the largest energy consumption per unit volume. The ultrasonic vibration–assisted LENS process cannot only improve the clad quality, but can also decrease the energy consumption to a considerable extent.

  5. Energy production and consumption in the Yemen Arab Republic

    Energy Technology Data Exchange (ETDEWEB)

    Saqqaf, A.

    The energy sector reflects the major changes in the socio-economic structure and massive private and government investments that have given North Yemen a 6% real growth rate since 1970. The author surveys the energy sector over the past decade, and uses an earlier energy balance to forecast to the end of this decade. The survey, which focuses on consumption and supply, considers various potential sources of energy, including renewable forms and discusses new developments in oil exploration and refining capacity. The most significant development is not the dramatic rise in energy consumption, but in the discovery and exploitation of oil which allowed the Yemen Arab Republic to join the league of oil-producing nations. 1 figure, 2 tables.

  6. Questionnaire survey, Indoor climate measurements and Energy consumption

    DEFF Research Database (Denmark)

    Knudsen, Henrik Nellemose; Thomsen, Kirsten Engelund; Mørck, Ove

    2012-01-01

    to be designed and constructed with a heating demand corresponding to the Danish low-energy standard referred to as "low-energy class 1" in a new settlement called Stenløse Syd. This means that the energy consumption is to be 50% lower than the requirement in BR08 (Danish Building Regulations 2008). 66 flats....... This report presents part of the results of an evaluation of the project that was performed in the settlement. The evaluation consisted of a questionnaire survey of occupant experiences and satisfaction in 35 single-family houses, measurements of energy consumption in 22 selected single-family houses and 58......The municipality of Egedal decided in 2006 to make use of the possibility in the Danish Planning Law for a municipality to tighten the energy requirements in the local plan for a new settlement to be erected in the municipality. During the years 2007-2011 a total of 442 dwellings were...

  7. Repeated soil application of organic waste amendments reduces draught force and fuel consumption for soil tillage

    DEFF Research Database (Denmark)

    Peltrea, Clément; Nyord, Tavs; Bruun, Sander

    2015-01-01

    for different organic wastes influenced the specific draught. Overall, the decrease in draught force could lead to a decrease in tractor fuel consumption for soil tillage of up to 25% for compost applied at an accelerated rate and up to 14% for compost applied at a normal rate. This reduced fuel consumption......Abstract Soil application of organic waste products (OWP) can maintain or increase soil organic carbon (SOC) content, which in turn could lead to increased porosity and potentially to reduced energy use for soil tillage. Only a few studies have addressed the effect of SOC content on draught force...... for soil tillage, and this still needs to be addressed for fields that receive diverse types of organic waste of urban, agricultural and agro-industrial origin. The objective of this study was to determine the effect of changes in SOC induced by repeated soil application of OWP on draught force for soil...

  8. Analysis of federal incentives used to stimulate energy consumption

    Energy Technology Data Exchange (ETDEWEB)

    Cole, R.J.; Cone, B.W.; Emery, J.C.; Huelshoff, M.; Lenerz, D.E.; Marcus, A.; Morris, F.A.; Sheppard, W.J.; Sommers, P.

    1981-08-01

    The purpose of the analysis is to identify and quantify Federal incentives that have increased the consumption of coal, oil, natural gas, and electricity. The introductory chapter is intended as a device for presenting the policy questions about the incentives that can be used to stimulate desired levels of energy development. In the theoretical chapter federal incentives were identified for the consumption of energy as Federal government actions whose major intent or result is to stimulate energy consumption. The stimulus comes through changing values of variables included in energy demand functions, thereby inducing energy consumers to move along the function in the direction of greater quantity of energy demanded, or through inducing a shift of the function to a position where more energy will be demanded at a given price. The demand variables fall into one of six categories: price of the energy form, price of complements, price of substitutes, preferences, income, and technology. The government can provide such incentives using six different policy instruments: taxation, disbursements, requirements, nontraditional services, traditional services, and market activity. The four major energy forms were examined. Six energy-consuming sectors were examined: residential, commercial, industrial, agricultural, transportation, and public. Two types of analyses of incentive actions are presented in this volume. The generic chapter focused on actions taken in 1978 across all energy forms. The subsequent chapters traced the patterns of incentive actions, energy form by energy form, from the beginning of the 20th century, to the present. The summary chapter includes the results of the previous chapters presented by energy form, incentive type, and user group. Finally, the implications of these results for solar policy are presented in the last chapter. (MCW)

  9. Energy-efficient Building in Greenland: Investigation of the Energy Consumption and Indoor Climate

    DEFF Research Database (Denmark)

    Luc, Katarzyna Marta; Kotol, Martin; Lading, Tove

    2016-01-01

    Recently, a brand new single family home was built in Sisimiut, Greenland. The building was constructed as a wooden house typical for Greenland. However, some non-traditional measures were implemented in order to reduce the energy consumption and improve indoor air quality. Assessment...... was installed in the house. It enables the evaluation of the indoor air quality, as well as building's energy performance. The aim of this investigation was to evaluate the performance of the newly constructed house by and compare it with the performance of identical house built in a traditional way by using...... a computer model. The data obtained from the measurements in the new house were used to verify the model. Significant energy savings and improvements of indoor air quality were found in the new house when compared to the traditional one. Moreover, all the extra measures have a feasible payback time despite...

  10. Energy-efficient Building in Greenland: Investigation of the Energy Consumption and Indoor Climate

    DEFF Research Database (Denmark)

    Luc, Katarzyna Marta; Kotol, Martin; Lading, Tove

    2015-01-01

    Recently, a brand new single family home was built in Sisimiut, Greenland. The building was constructed as a wooden house typical for Greenland. However, some non-traditional measures were implemented in order to reduce the energy consumption and improve indoor air quality. Assessment...... was installed in the house. It enables the evaluation of the indoor air quality, as well as building's energy performance. The aim of this investigation was to evaluatethe performance of the newly constructed house by and compare it with the performance of identical house built in a traditional way by using...... a computer model. The data obtained from the measurements in the new house were used to verify the model. Significant energy savings and improvements of indoor air quality were found in the new house when compared to the traditional one. Moreover, all the extra measures have a feasible payback time despite...

  11. Legitimacy of concerns about caffeine and energy drink consumption.

    Science.gov (United States)

    Wesensten, Nancy J

    2014-10-01

    Whether caffeine and energy drink consumption presents a critical emerging health problem is not currently known. Available evidence suggests that energy drink consumption represents a change in the ways in which individuals in the United States consume caffeine but that the amount of caffeine consumed daily has not appreciably increased. In the present review, the question of whether Americans are sleep deprived (a potential reason for using caffeine) is briefly explored. Reported rates of daily caffeine consumption (based on beverage formulation) and data obtained from both civilian and military populations in the United States are examined, the efficacy of ingredients other than caffeine in energy drinks is discussed, and the safety and side effects of caffeine are addressed, including whether evidence supports the contention that excessive caffeine/energy drink consumption induces risky behavior. The available evidence suggests that the main legitimate concern regarding caffeine and energy drink use is the potential negative impact on sleep but that, otherwise, there is no cause for concern regarding caffeine use in the general population. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

  12. Optimizing Ice Thermal Storage to Reduce Energy Cost

    Science.gov (United States)

    Hall, Christopher L.

    Energy cost for buildings is an issue of concern for owners across the U.S. The bigger the building, the greater the concern. A part of this is due to the energy required to cool the building and the way in which charges are set when paying for energy consumed during different times of the day. This study will prove that designing ice thermal storage properly will minimize energy cost in buildings. The effectiveness of ice thermal storage as a means to reduce energy costs lies within transferring the time of most energy consumption from on-peak to off-peak periods. Multiple variables go into the equation of finding the optimal use of ice thermal storage and they are all judged with the final objective of minimizing monthly energy costs. This research discusses the optimal design of ice thermal storage and its impact on energy consumption, energy demand, and the total energy cost. A tool for optimal design of ice thermal storage is developed, considering variables such as chiller and ice storage sizes and charging and discharge times. The simulations take place in a four-story building and investigate the potential of Ice Thermal Storage as a resource in reducing and minimizing energy cost for cooling. The simulations test the effectiveness of Ice Thermal Storage implemented into the four-story building in ten locations across the United States.

  13. Home energy information measuring and managing energy consumption in residential buildings

    CERN Document Server

    Green, David

    2014-01-01

    The book contains the data required to measure and manage energy consumption in residential buildings. This book describes energy information in detail so that any homeowner can measure energy use on a continuing basis, make decisions regarding how to conserve energy, implement improvements, then monitor the results of those improvements. In the past, it has been difficult to collect residential energy consumption data in real-time. This book helps overcome that challenge by teaching readers how to use self-installed data collection devices that monitor consumption of circuits or appliances, a

  14. Model of price-dependent management of an industrial enterprise energy consumption

    Directory of Open Access Journals (Sweden)

    Solovieva I.A.

    2017-01-01

    Full Text Available The article is devoted to the problems of price-dependent management of energy consumed by industrial enterprises which are involved in purchasing energy in the wholesale and retail energy markets. The article provides the analysis of forming the obligation value to pay for each component of cost of energy. There have been revealed ways and time intervals of energy consumption demand value management in order to minimize the obligation value to pay for cost of energy. The authors have developed a model aimed at managing energy consumption demand which takes into consideration the specific character of forming the obligation to pay in terms of each component of cost bearing in mind to the factors restricting possibilities to manage demand in the time intervals required. The article also covers some description of the parameters developed for information support of the model offered. The practical approval conducted by the authors, permits to state that using the mechanism of price-dependent energy consumption gives industrial enterprises substantial reserves to reduce energy consumption costs. The research results are of practical importance and can be applied in everyday activity connected with energy purchasing by industrial enterprises.

  15. Energy Conservation Behaviour Toolkit. Incentive Meachnisms for Effective Decrease of Energy Consumption at the Workplace

    NARCIS (Netherlands)

    Kalz, Marco; Börner, Dirk; Specht, Marcus

    2012-01-01

    Kalz, M., Börner, D., & Specht, M. (2012, 18 September). Energy Conservation Behaviour Toolkit. Incentive Mechanisms for Effective Decrease of Energy Consumption at the Workplace. Presentation at the 'Tussenbijeenkomst SURFnet Innovatieregeling Duurzaamheid & ICT', Utrecht, The Netherlands.

  16. Water treatment in public swimming pools - reduction of energy consumption; Vandbehandling i svoemmebade - reduktion af energiforbrug

    Energy Technology Data Exchange (ETDEWEB)

    Hammerich, H.; Radisch, N. (Ramboell, Koege (Denmark)); Olesen, Jens Christian (Gladsaxe Sportscenter, Gladsaxe (Denmark)) (and others)

    2010-04-15

    Measurements were made in five public swimming baths, and energy savings were achieved using new filters, pumps, water treatment control depending on bather load, etc. In a 50 metre pool, electricity consumption for water treatment decreased by 50%, and in a hot-water/paddling pool, electricity consumption decreased by 30-40% while still maintaining satisfactory water quality - even during periods of heavy bather load. In another swimming bath, ventilation electricity consumption was reduced by 15%. The results will e.g. be used to revise the Danish executive order on swimming pools and water quality to allow bather load-dependent water circulation. (ln)

  17. IMPACT OF THERMOMECHANICAL REFINING CONDITIONS ON FIBER QUALITY AND ENERGY CONSUMPTION BY MILL TRIAL

    Directory of Open Access Journals (Sweden)

    Jun Hua,

    2012-02-01

    Full Text Available Fiber thermomechanical refining is a critical step for the manufacturing of medium density fiberboard (MDF. To increase productivity and improve fiber quality with a reduction in energy consumption during refining, it is essential to determine appropriate refining conditions, such as the chips retention time (accumulated chip height, CH in the pre-heater, feeding screw revolution speed (SR in the chip feeding pipe, and the opening ratio of the discharge valve (OV in the discharge pipe. Using multiple regression analysis, relationships between the response variables (the total fibers, the specific energy consumption obtained by the motor power consumption/the total amount of dry fibers, and the percentage of qualified fibers and the predictor variables (OV, CH, and SR were modeled. Specific energy consumption decreased with an increase in CH. When more chips were stored in the pre-heater, the chips were softened by the extended steam-treatment time, reducing the energy consumption. There were negative relationships between the percentage of qualified fibers and the predictor variables (OV and SR. It was reasoned that a greater proportion of coarse fibre was produced when the discharge valve opening ratio or the feeding screw speed increased. This resulted in a reduction in the percentage of qualified fibers. Due to the large sample size (1667 measurements for each variable in this study, the resulting regression equations can be applied to estimate the productivity, energy consumption, and fiber quality during refining in an MDF mill.

  18. Energy Consumption and Analysis on Energy Saving Measures at SINOPEC's Large Refineries

    Institute of Scientific and Technical Information of China (English)

    Zhuang Jian; Hou Kaifeng; Yan Chun; Li Zhiqiang

    2007-01-01

    This article sums up the energy consumption of process units and the overall energy consumption of 10 Mt/a class refineries constructed or revamped in recent years.The energy saving measures adopted in design of these refineries are analyzed and discussed.Finally,this article also makes comments and puts forward recommendations on the objectives for energy conservation at refineries jn the future.

  19. Energy drink consumption and impact on caffeine risk.

    Science.gov (United States)

    Thomson, Barbara M; Campbell, Donald M; Cressey, Peter; Egan, Ursula; Horn, Beverley

    2014-01-01

    The impact of caffeine from energy drinks occurs against a background exposure from naturally occurring caffeine (coffee, tea, cocoa and foods containing these ingredients) and caffeinated beverages (kola-type soft drinks). Background caffeine exposure, excluding energy drinks, was assessed for six New Zealand population groups aged 15 years and over (n = 4503) by combining concentration data for 53 caffeine-containing foods with consumption information from the 2008/09 New Zealand Adult Nutrition Survey (ANS). Caffeine exposure for those who consumed energy drinks (n = 138) was similarly assessed, with inclusion of energy drinks. Forty-seven energy drink products were identified on the New Zealand market in 2010. Product volumes ranged from 30 to 600 ml per unit, resulting in exposures of 10-300 mg caffeine per retail unit consumed. A small percentage, 3.1%, of New Zealanders reported consuming energy drinks, with most energy drink consumers (110/138) drinking one serving per 24 h. The maximum number of energy drinks consumed per 24 h was 14 (total caffeine of 390 mg). A high degree of brand loyalty was evident. Since only a minor proportion of New Zealanders reported consuming energy drinks, a greater number of New Zealanders exceeded a potentially adverse effect level (AEL) of 3 mg kg(-1) bw day(-1) for caffeine from caffeine-containing foods than from energy drinks. Energy drink consumption is not a risk at a population level because of the low prevalence of consumption. At an individual level, however, teenagers, adults (20-64 years) and females (16-44 years) were more likely to exceed the AEL by consuming energy drinks in combination with caffeine-containing foods.

  20. Reducing power consumption during execution of an application on a plurality of compute nodes

    Science.gov (United States)

    Archer, Charles J [Rochester, MN; Blocksome, Michael A [Rochester, MN; Peters, Amanda E [Rochester, MN; Ratterman, Joseph D [Rochester, MN; Smith, Brian E [Rochester, MN

    2012-06-05

    Methods, apparatus, and products are disclosed for reducing power consumption during execution of an application on a plurality of compute nodes that include: executing, by each compute node, an application, the application including power consumption directives corresponding to one or more portions of the application; identifying, by each compute node, the power consumption directives included within the application during execution of the portions of the application corresponding to those identified power consumption directives; and reducing power, by each compute node, to one or more components of that compute node according to the identified power consumption directives during execution of the portions of the application corresponding to those identified power consumption directives.

  1. Basic tables of the energy consumption 1985. Basistabellen energiegebruik 1985

    Energy Technology Data Exchange (ETDEWEB)

    Tiemersma, D.N.; Rouw, M.

    1991-01-01

    Reliable and useful tables of one basic year are necessary to maintain and to actualize the energy scenarios of the Energy Study Centre of the Netherlands Energy Research Foundation. Spring 1989 such basic tables were composed for the Dutch energy consumption in 1985. A basic structure has been designed to classify energy demand data. Three main sectors are distinguished: the built environment, the production system, and the transportation sector. Within each sector several subsectors can be distinguished. The energy sources considered are: coal, oil, natural gas, electric power, hot water and steam, and different gases. The energy is used for space heating, processes and electric power. In the appendix account is given of the sources of the data. The tables presented are deducted from the Dutch Energy Economy (NEH) tables and supplemented by several other sources. 25 refs., 15 tabs.

  2. Energy consumption and economic growth on the focus on nuclear energy

    Energy Technology Data Exchange (ETDEWEB)

    Ozkan, Filiz [Sakarya Univ., Sakarya (Turkey). Dept. of Financial Econometric; Pektas, Ali Osman [Bahcesehir Univ., Istanbul (Turkey). Dept. of Civil Engineering; Ozkan, Omer [Istanbul Medeniyet Univ. (Turkey). Dept. of Civil Engineering

    2017-01-15

    Since the quest for global and personal prosperity, the drive to eradicate poverty and the motivation to ensure sustainability for the world are collectively dependent on a supply of safe, emissions-free power there are many studies in literature focuses on the relationship between economic growth and energy consumption. This study tries to enlarge the dimensions of these researches by using a large dataset. The second aim of this study is to focus on Nuclear energy consumption. According to the empirical results of the study, Energy consumption is found as co-integrated with the GDP in all 55 countries. There exist bidirectional causality between nuclear, renewable energy consumption and the GDP. Additionally, the unidirectional causality extends from economic growth to hydroelectric, petroleum, coal and total energy consumption.

  3. ENERGY CONSUMPTION FORECASTING METHODOLOGY OF A SET OF OBJECTS

    OpenAIRE

    KHUDAYAROV MUZAFFAR BURHANOVICH; KHABIBULINA ALBINA TALGATOVNA; KARIMKULOV HOJIAKBAR KHOLMURADOVICH

    2016-01-01

    This article presents the methodology and questions the use of different types of models for forecasting of energy consumption a set of objects. To improve the forecasting results is carried out procedure to select the best model for each object together.

  4. A Resource Utilization Score for Software Energy Consumption

    NARCIS (Netherlands)

    Jagroep, E.A.; van der Werf, J.M.E.M.; Broekman, Jordy; Blom, Leen; van Vliet, Rob; Brinkkemper, S.

    Software as the true consumer of power and its potential contribution to reach sustainability goals is increasingly being acknowledged. Studies so far have presented successful results and methods to address the energy consumption of the software, indicating that different stakeholders striving for

  5. Developing an Analytical Framework for Argumentation on Energy Consumption Issues

    Science.gov (United States)

    Jin, Hui; Mehl, Cathy E.; Lan, Deborah H.

    2015-01-01

    In this study, we aimed to develop a framework for analyzing the argumentation practice of high school students and high school graduates. We developed the framework in a specific context--how energy consumption activities such as changing diet, converting forests into farmlands, and choosing transportation modes affect the carbon cycle. The…

  6. Evaluation of energy consumption in different drying methods

    Energy Technology Data Exchange (ETDEWEB)

    Motevali, Ali; Minaei, Saeid; Khoshtagaza, Mohammad Hadi [Department of Agricultural Machinery Engineering, Agricultural Faculty, Tarbiat Modares University, Tehran 14115-111 (Iran, Islamic Republic of)

    2011-02-15

    This study was conducted to evaluate energy consumption in various drying systems including hot-air convection, use of microwave pretreatment with convection dryer, microwave drying, vacuum drying and infrared drying. Tests were conducted using pomegranate arils under various experimental conditions as follows. In convection dryer at six temperature levels (45, 50, 55, 60, 65 and 70 C) and three air velocity levels (0.5, 1 and 1.5 m/s) at three pretreatments of control, 100 W microwave pretreatment for 20 min and 200 W microwave pretreatment for 10 min. Experiments in the microwave dryer were done at three power levels of 100, 200 and 300 W and in vacuum dryer at five temperature levels (50, 60, 70, 80, and 90 C) under 250 kPa pressure. For infrared drying, there were four air velocity levels (0.3, 0.5, 0.7 and 1 m/s) and three illumination levels (0.22, 0.31 and 0.49 W/cm{sup 2}). Experimental results showed that minimum and maximum energy consumption in pomegranate drying were associated with microwave and vacuum dryers, respectively. The use of microwave pretreatment in drying pomegranate arils in hot air dryer decreased drying time and energy consumption in comparison with pure convection drying. In infrared drying, it was found that drying time increased with air velocity which resulted in increased energy consumption. (author)

  7. Actual energy consumption in dwellings. The effect of energy performance regulations and occupant behaviour

    Energy Technology Data Exchange (ETDEWEB)

    Guerra Santin, O.

    2010-10-19

    Residential buildings have continuously improved in energy efficiency, partly as a consequence of the introduction of energy regulations in many countries. Although better thermal properties and systems efficiency have lowered energy consumption for space heating in recent decades, substantial differences in energy consumption in similar dwellings are still being observed. These differences in consumption are thought to be caused by differences in occupancy patterns, by quality of construction and by rebound effects. This research addresses the effect of energy performance regulations and occupant behavior on energy consumption for space and water heating in dwellings built after the introduction of the energy performance regulations in the Netherlands. The results of this research show that improving the energy efficiency of buildings alone is not enough to decrease that energy consumption. The large differences found in the use of dwellings indicate that, especially in energy efficient houses, occupant behavior provides an opportunity for further reductions in the energy consumption for space heating which could boost the efforts to conserve energy worldwide.

  8. Germany: primary energy consumption in 2002; Primaerenergieverbrauch in Deutschland 2002

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2003-03-01

    The consumption of primary energy in Germany in 2002 has declined clearly compared to the level in the year before. It amounted to 487.8 million TCE, which is 1.9% less than the 498.5 million TCE of 2001. The development is mainly due to the economic slump and to the milder weather, with higher ambient temperatures, than in 2001. On the basis of 0.2% overall economic growth, the energy productivity of the economy improved by 0.8%. It was clearly lower than over the average of the period 1991 to 2001, where it had been 1.4%. Unlike the consumption of primary energy, gross electricity consumption increased slightly along with the gross domestic product, reaching approx. 582,0 billion kWh, which is approx. 1 billion kWh above the approx. 581.0 billion kWh of 2001. While 2001 still showed an export balance of approx. 1.3 billion kWh, 2002 shows an import balance of 0.7 billion kWh. After a clear drop in the second half of 2001, oil prices picked up in 2002, especially as a result of the threat of a war in Iraq. The world market price of (Brent) crude oil was approx. 55% higher in December 2002 than it had been in late 2001; the shift in the Euro-Dollar exchange rate in favor of the Euro reduced this impact on import prices to a level of approx. +33%. Unlike oil, the import prices of natural gas were lower than those in 2001 throughout the past year. Also the prices of imported coal dropped significantly. Electricity prices continued to rise sharply, partly also as a consequence of energy policy measures. (orig.) [German] Der Primaerenergieverbrauch in Deutschland ist im Jahre 2002 gegenueber dem Vorjahr deutlich gesunken. Er lag mit 488,5 Mio. t SKE um 1,9% niedriger als 2001 mit 497,8 Mio. t. SKE. Diese Entwicklung ist im Wesentlichen auf die schwache Konjunktur und auf die gegenueber 2001 mildere Witterung mit hoeheren Umgebungstemperaturen zurueckzufuehren. Die Energieproduktivitaet der Volkswirtschaft hat sich bei einem gesamtwirtschaftlichen Wachstum von 0,2% im

  9. 10 CFR 430.23 - Test procedures for the measurement of energy and water consumption.

    Science.gov (United States)

    2010-01-01

    ... consumption. 430.23 Section 430.23 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CONSERVATION PROGRAM... per-cycle energy consumption for the standard cycle in kilowatt-hours per cycle, determined according... cycles per year, (ii) half the sum of the average per-cycle energy consumption for the standard cycle and...

  10. Building and occupant characteristics as determinants of residential energy consumption

    Energy Technology Data Exchange (ETDEWEB)

    Nieves, L.A.; Nieves, A.L.

    1981-10-01

    The major goals of the research are to gain insight into the probable effects of building energy performance standards on energy consumption; to obtain observations of actual residential energy consumption that could affirm or disaffirm comsumption estimates of the DOE 2.0A simulation model; and to investigate home owner's conservation investments and home purchase decisions. The first chapter covers the investigation of determinants of household energy consumption. The presentation begins with the underlying economic theory and its implications, and continues with a description of the data collection procedures, the formulation of variables, and then of data analysis and findings. In the second chapter the assumptions and limitations of the energy use projections generated by the DOE 2.0A model are discussed. Actual electricity data for the houses are then compared with results of the simulation. The third chapter contains information regarding households' willingness to make energy conserving investments and their ranking of various conservation features. In the final chapter conclusions and recommendations are presented with an emphasis on the policy implications of this study. (MCW)

  11. The relationship between economic growth, energy consumption, and CO2 emissions: Empirical evidence from China.

    Science.gov (United States)

    Wang, Shaojian; Li, Qiuying; Fang, Chuanglin; Zhou, Chunshan

    2016-01-15

    Following several decades of rapid economic growth, China has become the largest energy consumer and the greatest emitter of CO2 in the world. Given the complex development situation faced by contemporary China, Chinese policymakers now confront the dual challenge of reducing energy use while continuing to foster economic growth. This study posits that a better understanding of the relationship between economic growth, energy consumption, and CO2 emissions is necessary, in order for the Chinese government to develop the energy saving and emission reduction strategies for addressing the impacts of climate change. This paper investigates the cointegrating, temporally dynamic, and casual relationships that exist between economic growth, energy consumption, and CO2 emissions in China, using data for the period 1990-2012. The study develops a comprehensive conceptual framework in order to perform this analysis. The results of cointegration tests suggest the existence of long-run cointegrating relationship among the variables, albeit with short dynamic adjustment mechanisms, indicating that the proportion of disequilibrium errors that can be adjusted in the next period will account for only a fraction of the changes. Further, impulse response analysis (which describes the reaction of any variable as a function of time in response to external shocks) found that the impact of a shock in CO2 emissions on economic growth or energy consumption was only marginally significant. Finally, Granger casual relationships were found to exist between economic growth, energy consumption, and CO2 emissions; specifically, a bi-directional causal relationship between economic growth and energy consumption was identified, and a unidirectional causal relationship was found to exist from energy consumption to CO2 emissions. The findings have significant implications for both academics and practitioners, warning of the need to develop and implement long-term energy and economic policies in

  12. Energy Drink Consumption: Beneficial and Adverse Health Effects.

    Science.gov (United States)

    Alsunni, Ahmed Abdulrahman

    2015-10-01

    Consumption of energy drinks has been increasing dramatically in the last two decades, particularly amongst adolescents and young adults. Energy drinks are aggressively marketed with the claim that these products give an energy boost to improve physical and cognitive performance. However, studies supporting these claims are limited. In fact, several adverse health effects have been related to energy drink; this has raised the question of whether these beverages are safe. This review was carried out to identify and discuss the published articles that examined the beneficial and adverse health effects related to energy drink. It is concluded that although energy drink may have beneficial effects on physical performance, these products also have possible detrimental health consequences. Marketing of energy drinks should be limited or forbidden until independent research confirms their safety, particularly among adolescents.

  13. Trends in Residential Energy Consumption in Saudi Arabia with Particular Reference to the Eastern Province

    Directory of Open Access Journals (Sweden)

    Farajallah Alrashed

    2014-12-01

    Full Text Available Residential buildings are vital in the energy scenario of Saudi Arabia as they account for 52% of the total electricity consumption. The Eastern Province, due to its harsh weather conditions, is one of the most challenging areas in Saudi Arabia in terms of residential energy consumption. The province is vital also because of its large land area, accounting for almost one third of the entire country. This article investigates some of the important factors related to the residential energy consumption i.e. weather conditions, types of dwellings, building envelops, air-conditioning (A/C systems and domestic appliances especially cooking ovens. The work is based upon an analysis of the actual monthly electricity consumption for 115 dwellings in Dhahran for the year 2012. The investigated buildings include 62 apartments, 28 villas, and 25 traditional houses. The annual average electricity consumption for the surveyed dwellings was found to be 176.5 kWh/m2, a value higher than international energy-efficiency benchmarks. It is found that the use of mini-split A/C systems, thermal insulation and double-glazed windows can help reduce the electricity consumption by over 30%.

  14. Efficiency of Energy Consumption as a Base for Sustainable Energy Sector

    OpenAIRE

    Anicetas Ignotas; Viktorija Stasytytė

    2016-01-01

    Lithuania, as many other EU countries, encounters key challenges in three energy sector fields: energy independence, energy sector competitiveness and sustainable energy sector development. Such situation is determined by historical and political conditions, as well as by limited internal energy resources. In such context an importance of energy consumption efficiency pursuing country energy sector sustainability is highlighted. By implementing the long-term goals and tasks a country may seek...

  15. Transport energy consumption achievement based on indicator analysis

    Science.gov (United States)

    Jiang, Jian

    2017-06-01

    In order to evaluate the transport sustainability level for regions, the concept of achievement efficiency in transport energy consumption is initially suggested in this paper. The research object is not only for the energy consumption by transport operation but also the whole life of the transport procedure, which is the thought of life cycle assessment. And then, on the quantitative analysis to calculate the transport energy achievement efficiency of the regions, the indicators that can represent the achievement of transport energy consumption are convincingly found out by indicator theory. Next, concentration is focused on the transport related indicators and proper indicators are picked up from the candidate indicators, which were the affecting factors to this issue. After that, using the selected indicators, we introduce the method of data envelopment analysis to do quantitative analysis, which helps to get the achievement efficiency of transport energy among cities all over the world. The analysis result shows the efficient regions and the inefficient regions respectively. Furthermore, the detailed efficiency value of each region is also laid out clearly. For the improvement, the inadequate output or input variables of the inefficient regions were listed compared with the efficient regions so that corresponding transport policy implications can be resulted for the inefficient regions to reach high level sustainability.

  16. Energy consumption by forward osmosis treatment of landfill leachate for water recovery.

    Science.gov (United States)

    Iskander, Syeed Md; Zou, Shiqiang; Brazil, Brian; Novak, John T; He, Zhen

    2017-03-22

    Forward osmosis (FO) is an alternative approach for treating landfill leachate with potential advantages of reducing leachate volume and recovering high quality water for direct discharge or reuse. However, energy consumption by FO treatment of leachate has not been examined before. Herein, the operational factors such as recirculation rates and draw concentrations were studied for their effects on the quantified energy consumption by an FO system treating actual leachate collected from two different landfills. It was found that the energy consumption increased with a higher recirculation rate and decreased with a higher draw concentration, and higher water recovery tended to reduce energy consumption. The highest energy consumption was 0.276±0.033kWhm(-3) with the recirculation rate of 110mLmin(-1) and 1-M draw concentration, while the lowest of 0.005±0.000kWhm(-3) was obtained with 30mLmin(-1) recirculation and 3-M draw concentration. The leachate with lower concentrations of the contaminants had a much lower requirement for energy, benefited from its higher water recovery. Osmotic backwashing appeared to be more effective for removing foulants, but precise understanding of membrane fouling and its controlling methods will need a long-term study. The results of this work have implied that FO treatment of leachate could be energy efficient, especially with the use of a suitable draw solute that can be regenerated in an energy efficient way and/or through combination with other treatment technologies that can reduce contaminant concentrations before FO treatment, which warrants further investigation.

  17. Causality between energy consumption, emissions of CO{sub 2} and surface air temperature

    Energy Technology Data Exchange (ETDEWEB)

    Mariam, Y.K.G.; Barre, M. [Environment Canada, Hull, Quebec (Canada)

    1998-12-31

    Climate research has been one of the focal points of the scientific community for the past few decades. However, most of the studies tended to examine the scientific basis to understand the mechanisms that resulted in changes in global climate. There was less emphasis on issues of mitigating the causes of climate change. Due to the fact that climate change is primarily the result of emission of green houses gases, especially carbon dioxide, and due to the fact that most these emissions are anthropogenic, social scientists have to address strategies in which emissions are reduced. Of particular significance is that global climate is a common good. Private companies and individuals, in an effort to maximize income or welfare, dump increased emission to the atmosphere. As a typical example of the classic work of the tragedy of the commons, there is a desperate need for all disciplines of the social and natural sciences to develop ways of mitigating the dangers of changes in the global common climate. Energy consumption, particularly fossil fuels, has been attributed as the driving force for the increased emission of CO{sub 2} and rise in global surface air temperature. While many studies have been carried out regarding the relationship between global energy consumption, emissions of CO{sub 2} and indicators of climate change such as temperature, there are only a few studies that have examined linkages between these factors at the level of individual countries. Increased consumption of carbon-intensive sources of energy will continue to exacerbate existing climate change problems. On the other hand, not only will energy consumption influence climate change but also changes in climate change may influence the patterns of energy consumption. The objectives of this research are to examine trends in energy consumption and emissions of CO{sub 2}, and causal linkages between energy consumption, emission of CO{sub 2} and mean annual surface temperature for 21 OECD countries.

  18. Experimental verification of an energy consumption signal tool for operational decision support in an office building

    Energy Technology Data Exchange (ETDEWEB)

    Pavlak, Gregory S.; Henze, Gregor P.; Hirsch, Adam I.; Florita, Anthony R.; Dodier, Robert H.

    2016-12-01

    This paper demonstrates an energy signal tool to assess the system-level and whole-building energy use of an office building in downtown Denver, Colorado. The energy signal tool uses a traffic light visualization to alert a building operator to energy use which is substantially different from expected. The tool selects which light to display for a given energy end-use by comparing measured energy use to expected energy use, accounting for uncertainty. A red light is only displayed when a fault is likely enough, and abnormal operation costly enough, that taking action will yield the lowest cost result. While the theoretical advances and tool development were reported previously, it has only been tested using a basic building model and has not, until now, been experimentally verified. Expected energy use for the field demonstration is provided by a compact reduced-order representation of the Alliance Center, generated from a detailed DOE-2.2 energy model. Actual building energy consumption data is taken from the summer of 2014 for the office building immediately after a significant renovation project. The purpose of this paper is to demonstrate a first look at the building following its major renovation compared to the design intent. The tool indicated strong under-consumption in lighting and plug loads and strong over-consumption in HVAC energy consumption, which prompted several focused actions for follow-up investigation. In addition, this paper illustrates the application of Bayesian inference to the estimation of posterior parameter probability distributions to measured data. Practical discussion of the application is provided, along with additional findings from further investigating the significant difference between expected and actual energy consumption.

  19. Reducing water freshwater consumption at coal-fired power plants : approaches used outside the United States.

    Energy Technology Data Exchange (ETDEWEB)

    Elcock, D. (Environmental Science Division)

    2011-05-09

    desalination. Some of the direct approaches, such as dry air cooling, desalination, and recovery of cooling tower water for boiler makeup water, are costly and are deployed primarily in countries with severe water shortages, such as China, Australia, and South Africa. Table 1 shows drivers and approaches for reducing freshwater consumption in several countries outside the United States. Indirect approaches reduce water consumption while meeting other objectives, such as improving plant efficiency. Plants with higher efficiencies use less energy to produce electricity, and because the greater the energy production, the greater the cooling water needs, increased efficiency will help reduce water consumption. Approaches for improving efficiency (and for indirectly reducing water consumption) include increasing the operating steam parameters (temperature and pressure); using more efficient coal-fired technologies such as cogeneration, IGCC, and direct firing of gas turbines with coal; replacing or retrofitting existing inefficient plants to make them more efficient; installing high-performance monitoring and process controls; and coal drying. The motivations for increasing power plant efficiency outside the United States (and indirectly reducing water consumption) include the following: (1) countries that agreed to reduce carbon emissions (by ratifying the Kyoto protocol) find that one of the most effective ways to do so is to improve plant efficiency; (2) countries that import fuel (e.g., Japan) need highly efficient plants to compensate for higher coal costs; (3) countries with particularly large and growing energy demands, such as China and India, need large, efficient plants; (4) countries with large supplies of low-rank coals, such as Germany, need efficient processes to use such low-energy coals. Some countries have policies that encourage or mandate reduced water consumption - either directly or indirectly. For example, the European Union encourages increased efficiency

  20. Analyzing Residential End-Use Energy Consumption Data to Inform Residential Consumer Decisions and Enable Energy Efficiency Improvements

    Science.gov (United States)

    Carlson, Derrick R.

    While renewable energy is in the process of maturing, energy efficiency improvements may provide an opportunity to reduce energy consumption and consequent greenhouse gas emissions to bridge the gap between current emissions and the reductions necessary to prevent serious effects of climate change and will continue to be an integral part of greenhouse gas emissions policy moving forward. Residential energy is a largely untapped source of energy reductions as consumers, who wish to reduce energy consumption for monetary, environmental, and other reasons, face barriers. One such barrier is a lack of knowledge or understanding of how energy is consumed in a home and how to reduce this consumption effectively through behavioral and technological changes. One way to improve understanding of residential energy consumption is through the creation of a model to predict which appliances and electronics will be present and significantly contribute to the electricity consumption of a home on the basis of various characteristics of that home. The basis of this model is publically available survey data from the Residential Energy Consumption Survey (RECS). By predicting how households are likely to consume energy, homeowners, policy makers, and other stakeholders have access to valuable data that enables reductions in energy consumption in the residential sector. This model can be used to select homes that may be ripe for energy reductions and to predict the appliances that are the basis of these potential reductions. This work suggests that most homes in the U.S. have about eight appliances that are responsible for about 80% of the electricity consumption in that home. Characteristics such as census region, floor space, income, and total electricity consumption affect which appliances are likely to be in a home, however the number of appliances is generally around 8. Generally it takes around 4 appliances to reach the 50% threshold and 12 appliances to reach 90% of electricity

  1. CO2 Emissions, Energy Consumption, Economic Growth and FDI in Vietnam

    Directory of Open Access Journals (Sweden)

    Dinh Hong Linh

    2014-09-01

    Full Text Available This study examines the dynamic relationships between CO2 emissions, energy consumption, FDI and economic growth for Vietnam IN the period from 1980 to 2010 based on Environmental Kuznets Curve (EKC approach, cointegration, and Granger causality tests. The empirical results do not support the EKC theory in Vietnam. However, the cointegration and Granger causality test results indicate a dynamic relationship among CO2 emissions, energy consumption, FDI and economic growth. The short run bidirectional relationship between Vietnam’s income and FDI inflows implies that the increase in Vietnam’s income will attract more capital from overseas. Inversely, FDI inflow is also driver of national income growth. The existence of bidirectional relationships in the long-run provides important policy implications. We recommend implementing a dual strategy of increasing investment in energy infrastructure and promulgating energy conservation policies to increase energy efficiency and reduce wastage of energy.

  2. A survey of energy drink and alcohol mixed with energy drink consumption.

    Science.gov (United States)

    Magnezi, Racheli; Bergman, Lisa Carroll; Grinvald-Fogel, Haya; Cohen, Herman Avner

    2015-01-01

    Energy drink consumption among youth is increasing despite recommendations by the American Academy of Pediatrics to eliminate consumption by youth. This study provides information on consumption of energy drinks and alcohol mixed with energy drinks (AmED) in a sample of Israeli youth and how consumer knowledge about the risks affects consumption rates. The study was conducted in three Tel Aviv public schools, with a total enrollment of 1,253 students in grades 8 through 12. Among them, 802 students completed a 49-item questionnaire about energy drink and AmED consumption, for a 64 % response rate Non-responders included 451 students who were absent or refused to participate. All students in the same school were administered the questionnaire on the same day. Energy drinks are popular among youth (84.2 % have ever drunk). More tenth through twelfth grade students consumed energy drinks than eighth and ninth grade students. Students who began drinking in elementary school (36.8 %) are at elevated risk for current energy drink (P consumption (OR 1.925; 95 %CI 1.18-3.14). The association between current AmED consumption and drinking ED at a young age is important. Boys and those who start drinking early have a greater risk of both ED and AmED consumption. The characteristics of early drinkers can help increase awareness of potential at-risk youth, such as junior and senior high school students with less educated or single parents. Risks posed by early use on later energy drink and AmED consumption are concerning. We suggest that parents should limit accessibility. Increased knowledge about acceptable and actual amounts of caffeine in a single product might decrease consumption.

  3. Study on energy consumption at soccer club SC Everstein; Onderzoek naar energiegebruik voetbalvereniging SC Everstein

    Energy Technology Data Exchange (ETDEWEB)

    Verhoef, F.; Entrop, A.G. [Universiteit Twente, Enschede (Netherlands)

    2011-11-15

    The University of Twente in Enschede, Netherlands, at the request of soccer club Everstein from Everdingen, Netherlands, conducted a study on the energy consumption of the club and the opportunities to reduce the consumption of energy. With some effort up to 476,000 MJ per year can be saved, a reduction of 76 percent. [Dutch] Universiteit Twente heeft op verzoek van voetbalclub Everstein uit Everdingen een onderzoek uitgevoerd naar het energiegebruik van de club en de mogelijkheden deze te verlagen. Met een beetje inspanning kan 476.000 MJ/a worden bespaard; een vermindering van 76 procent.

  4. Oxygen Consumption Rate and Energy Expenditure in Mice: Indirect Calorimetry.

    Science.gov (United States)

    Kim, Eun Ran; Tong, Qingchun

    2017-01-01

    Global obesity epidemic demands more effective therapeutic treatments and better understanding of obesity pathophysiology. Since obesity results from energy imbalance, accurate quantification of energy intake and energy expenditure (EE) becomes an essential prerequisite to phenotype the cause for obesity development. Indirect calorimetry has long been used as one of the most established methods in EE quantification by detecting changes in levels of O2 consumption and CO2 production. In this article, we describe procedures and important considerations for an effective measurement using indirect calorimetry.

  5. An analysis of residential energy consumption in a temperate climate

    Energy Technology Data Exchange (ETDEWEB)

    Clark, Y.Y.; Vincent, W.

    1987-06-01

    Electrical energy consumption data have been recorded for several hundred submetered residential structures in Middle Tennessee. All houses were constructed with a common energy package.'' Specifically, daily cooling usage data have been collected for 130 houses for the 1985 and 1986 cooling seasons, and monthly heating usage data for 186 houses have been recorded by occupant participation over a seven-year period. Cooling data have been analyzed using an SPSSx multiple regression analysis and results are compared to several cooling models. Heating, base, and total energy usage are also analyzed and regression correlation coefficients are determined as a function of several house parameters.

  6. Towards Flexibility Detection in Device-Level Energy Consumption

    DEFF Research Database (Denmark)

    Neupane, Bijay; Pedersen, Torben Bach; Thiesson, Bo

    2014-01-01

    The increasing drive towards green energy has boosted the installation of Renewable Energy Sources (RES). Increasing the share of RES in the power grid requires demand management by flexibility in the consumption. In this paper, we perform a state-of-the-art analysis on the flexibility...... regularities and patterns and the correlation between operating different devices. Subsequently, we show the existence of detectable time and energy flexibility in device operations. Finally, we provide various results providing a foundation for load- and flexibility-detection and -prediction at the device...

  7. Critical sustainability and energy consumption in urban transport

    Directory of Open Access Journals (Sweden)

    Jovanović Miomir

    2010-01-01

    Full Text Available Industrialized countries are exploiting the world energy resources very quickly (although they do not have enough of their own energy reserves. On the other hand, population of the Third world simply exploded during the last few decades. Hence, the real problem may occur if the Third world metropolises follow the example of the auto-dependent, low density suburban development of American cities. The effects will be disastrous: 14 times more energy consumption and 9 times higher emissions of CO2 (in the sphere of urban transportation.

  8. Towards Flexibility Detection in Device-Level Energy Consumption

    DEFF Research Database (Denmark)

    Neupane, Bijay; Pedersen, Torben Bach; Thiesson, Bo

    2014-01-01

    The increasing drive towards green energy has boosted the installation of Renewable Energy Sources (RES). Increasing the share of RES in the power grid requires demand management by flexibility in the consumption. In this paper, we perform a state-of-the-art analysis on the flexibility...... regularities and patterns and the correlation between operating different devices. Subsequently, we show the existence of detectable time and energy flexibility in device operations. Finally, we provide various results providing a foundation for load- and flexibility-detection and -prediction at the device...

  9. Danish Sector Guide for Calculation of the Actual Energy Consumption

    DEFF Research Database (Denmark)

    Mortensen, Lone Hedegaard

    2016-01-01

    , the innovation network for sustainable construction, InnoBYG started work on a Danish sector guide for the calculation of actual energy consumption in relation to upgrading of buildings. The focus was to make a common guide for energy calculations that can be used by consultants performing calculations......Energy calculations have for a long time been a controversial topic as building owners do not necessarily achieve the promised energy savings after a building upgrade, but is this due to incorrect calculations or rather the evidence of misunderstandings in the communication? In Denmark...... of the energy calculation for building owners and developers. This paper describes the process that leads to the sector guide and briefly explains the content in both the technical guide and the communication paper. Finally the paper discusses some of the known dilemmas related to the measured energy...

  10. Cash and in-kind transfers in poor rural communities in Mexico increase household fruit, vegetable, and micronutrient consumption but also lead to excess energy consumption.

    Science.gov (United States)

    Leroy, Jef L; Gadsden, Paola; Rodríguez-Ramírez, Sonia; de Cossío, Teresa González

    2010-03-01

    Conditional transfer programs are increasingly popular, but the impact on household nutrient consumption has not been studied. We evaluated the impact of the Programa de Apoyo Alimentario (PAL), a cash and in-kind transfer program, on the energy and nutrient consumption of poor rural households in Mexico. The program has been shown to reduce poverty. Beneficiary households received either a food basket (including micronutrient-fortified milk) or cash. A random sample of 206 rural communities in Southern Mexico was randomly assigned to 1 of 4 groups: a monthly food basket with or without health and nutrition education, a cash transfer with a cost to the government equivalent to the food basket (14 USD/mo) with education, or control. The impact after 14 mo of exposure was estimated in a panel of 5823 households using a double difference regression model with household fixed effects. PAL was associated with increases (P consumption of total energy (5-9%), energy from fruits and vegetables (24-28%), and energy from animal source foods (24-39%). It also affected iron, zinc, and vitamin A and C consumption (P consumption of energy and all nutrients was greater in the food basket group (P energy-deficient should be carefully redesigned to ensure that pulling poor families out of poverty leads to improved micronutrient intake but not to increased energy consumption.

  11. Natural cocoa consumption: Potential to reduce atherogenic factors?

    Science.gov (United States)

    McFarlin, Brian K; Venable, Adam S; Henning, Andrea L; Prado, Eric A; Best Sampson, Jill N; Vingren, Jakob L; Hill, David W

    2015-06-01

    Short-term consumption of flavanol-rich cocoa has been demonstrated to improve various facets of vascular health. The purpose of the present study was to determine the effect of 4 weeks of natural cocoa consumption on selected cardiovascular disease (CVD) biomarkers in young (19-35 years) women of differing body mass indices (BMI; normal, overweight or obese). Subjects (n = 24) consumed a natural cocoa-containing product (12.7 g natural cocoa, 148 kcal/serving) or an isocaloric cocoa-free placebo daily for 4 weeks in a random, double-blind manner with a 2-week washout period between treatment arms. Fasted (>8-h) blood samples were collected before and after each 4-week period. Serum was analyzed to determine lipid profile (chemistry analyzer) and CVD biomarkers (26 biomarkers). EDTA-treated blood was used to assess monocytes (CD14, CD16, v11b and CD62L), while citrate-treated blood was used to measure changes in endothelial microparticles (EMPs; CD42a-/45-/144+) by flow cytometry. Natural cocoa consumption resulted in a significant decrease in haptoglobin (P = .034), EMP concentration (P = .017) and monocyte CD62L (P = .047) in obese compared to overweight and normal-weight subjects. Natural cocoa consumption regardless of BMI group was associated with an 18% increase in high-density lipoprotein (P = .020) and a 60% decrease in EMPs (P = .047). Also, obese subjects experienced a 21% decrease in haptoglobin (P = .034) and a 24% decrease in monocyte CD62L expression in (P = .047) following 4 weeks of natural cocoa consumption. Collectively, these findings indicate that acute natural cocoa consumption was associated with decreased obesity-related disease risk. More research is needed to assess the stability of the observed short-term changes.

  12. Complementary effects of torrefaction and co-pelletization: Energy consumption and characteristics of pellets.

    Science.gov (United States)

    Cao, Liang; Yuan, Xingzhong; Li, Hui; Li, Changzhu; Xiao, Zhihua; Jiang, Longbo; Huang, Binbin; Xiao, Zhihong; Chen, Xiaohong; Wang, Hou; Zeng, Guangming

    2015-06-01

    In this study, complementary of torrefaction and co-pelletization for biomass pellets production was investigated. Two kinds of biomass materials were torrefied and mixed with oil cake for co-pelletization. The energy consumption during pelletization and pellet characteristics including moisture absorption, pellet density, pellet strength and combustion characteristic, were evaluated. It was shown that torrefaction improved the characteristics of pellets with high heating values, low moisture absorption and well combustion characteristic. Furthermore, co-pelletization between torrefied biomass and cater bean cake can reduce several negative effects of torrefaction such as high energy consumption, low pellet density and strength. The optimal conditions for energy consumption and pellet strength were torrefied at 270°C and a blending with 15% castor bean cake for both biomass materials. The present study indicated that compelmentary performances of the torrefaction and co-pelletization with castor bean cake provide a promising alternative for fuel production from biomass and oil cake.

  13. Inequality across countries in energy intensities: an analysis of the role of energy transformation and final energy consumption

    OpenAIRE

    Duro Moreno, Juan Antonio; Padilla, Emilio

    2010-01-01

    This paper analyzes the role of the energy transformation index and of final energy consumption per GDP unit in the disparities in energy intensity across countries. In that vein, we use a Theil decomposition approach to analyze global primary energy intensity inequality as well as inequality across different regions of the world and inequality within these regions. The paper first demonstrates the pre-eminence of divergence in final energy consumption per GDP unit in explaining global primar...

  14. Predicting the Specific Energy Consumption of Reverse Osmosis Desalination

    Directory of Open Access Journals (Sweden)

    Ashlynn S. Stillwell

    2016-12-01

    Full Text Available Desalination is often considered an approach for mitigating water stress. Despite the abundance of saline water worldwide, additional energy consumption and increased costs present barriers to widespread deployment of desalination as a municipal water supply. Specific energy consumption (SEC is a common measure of the energy use in desalination processes, and depends on many operational and water quality factors. We completed multiple linear regression and relative importance statistical analyses of factors affecting SEC using both small-scale meta-data and municipal-scale empirical data to predict the energy consumption of desalination. Statistically significant results show water quality and initial year of operations to be significant and important factors in estimating SEC, explaining over 80% of the variation in SEC. More recent initial year of operations, lower salinity raw water, and higher salinity product water accurately predict lower values of SEC. Economic analysis revealed a weak statistical relationship between SEC and cost of water production. Analysis of associated greenhouse gas (GHG emissions revealed important considerations of both electricity source and SEC in estimating the GHG-related sustainability of desalination. Results of our statistical analyses can aid decision-makers by predicting the SEC of desalination to a reasonable degree of accuracy with limited data.

  15. Feedback as a means of decreasing residential energy consumption. Report PU/CES 34

    Energy Technology Data Exchange (ETDEWEB)

    Seligman, C; Darley, J M

    1976-08-01

    When residential units are analyzed in human factor terms, it is apparent that the consumption level feedback (typically a bill, calculated once a month, over all appliances) is inadequate to give the resident useful information about his energy consuming actions. The present study tested the hypothesis that providing immediate feedback to homeowners concerning their daily rate of electric usage would be effective in reducing electric consumption. In the studied homes, central air-conditioning is the largest single source of electric power consumption during the summer. Accordingly, it was possible to predict the household's expected electric consumption in terms of the average daily outdoor temperature. Predicted electric consumption was derived from a previous month's modeling period during which a regression line was fitted to predict consumption from average daily temperature, for each home. Feedback was expressed as a percentage of actual consumption over predicted consumption. Feedback was displayed to homeowners four times a week for approximately one month. The results confirmed the prediction. Before feedback began, the feedback and control groups were consuming electricity at approximately equal rates. During the feedback period, the feedback group used 10.5 percent less electricity. The effectiveness of the feedback procedure was explained in terms of its cueing, motivational, and commitment functions.

  16. Cardiovascular complications from consumption of high energy drinks: recent evidence.

    Science.gov (United States)

    Chrysant, S G; Chrysant, G S

    2015-02-01

    The energy drinks (ED) are caffeinated beverages that are popular among teenagers and young adults. They are aggressively marketed as providing alertness, energy and sex prowess. The EDs in addition to caffeine contain several plant stimulants and simple sugars, which increase their caloric content. The caffeine concentration in these drinks is high and their overconsumption could lead to insomnia, agitation, tremors and cardiovascular complications including sudden death. Alcohol is often mixed with EDs (AMEDs) in the wrong perception that the caffeine in the EDs will prevent the drowsiness and sleepiness from alcohol and allow the person to consume more alcohol. This false perception, could lead to alcohol intoxication and the taking of risky decisions, like driving under the influence of alcohol and the risk of serious physical harm to themselves and others. To prevent the problem of consumption of EDs and AMEDs, the caring physician could help by advising the parents and his young patients about the serious health risks from the consumption of these drinks. In order to grasp the extend of the problem of ED and AMED consumption, we did a Medline search of the English language literature from January 2010 to December 2013, using the terms EDs and alcohol-mixed EDs. All the findings from the recent studies regarding the cardiovascular complications from the consumption of EDs and AMEDs together with collateral literature will be discussed in this review.

  17. Impact of office productivity cloud computing on energy consumption and greenhouse gas emissions.

    Science.gov (United States)

    Williams, Daniel R; Tang, Yinshan

    2013-05-07

    Cloud computing is usually regarded as being energy efficient and thus emitting less greenhouse gases (GHG) than traditional forms of computing. When the energy consumption of Microsoft's cloud computing Office 365 (O365) and traditional Office 2010 (O2010) software suites were tested and modeled, some cloud services were found to consume more energy than the traditional form. The developed model in this research took into consideration the energy consumption at the three main stages of data transmission; data center, network, and end user device. Comparable products from each suite were selected and activities were defined for each product to represent a different computing type. Microsoft provided highly confidential data for the data center stage, while the networking and user device stages were measured directly. A new measurement and software apportionment approach was defined and utilized allowing the power consumption of cloud services to be directly measured for the user device stage. Results indicated that cloud computing is more energy efficient for Excel and Outlook which consumed less energy and emitted less GHG than the standalone counterpart. The power consumption of the cloud based Outlook (8%) and Excel (17%) was lower than their traditional counterparts. However, the power consumption of the cloud version of Word was 17% higher than its traditional equivalent. A third mixed access method was also measured for Word which emitted 5% more GHG than the traditional version. It is evident that cloud computing may not provide a unified way forward to reduce energy consumption and GHG. Direct conversion from the standalone package into the cloud provision platform can now consider energy and GHG emissions at the software development and cloud service design stage using the methods described in this research.

  18. TV Energy Consumption Trends and Energy-Efficiency Improvement Options

    Energy Technology Data Exchange (ETDEWEB)

    Park, Won Young; Phadke, Amol; Shah, Nihar; Letschert, Virginie

    2011-07-01

    The SEAD initiative aims to transform the global market by increasing the penetration of highly efficient equipment and appliances. SEAD is a government initiative whose activities and projects engage the private sector to realize the large global energy savings potential from improved appliance and equipment efficiency. SEAD seeks to enable high-level global action by informing the Clean Energy Ministerial dialogue as one of the initiatives in the Global Energy Efficiency Challenge. In keeping with its goal of achieving global energy savings through efficiency, SEAD was approved as a task within the International Partnership for Energy Efficiency Cooperation (IPEEC) in January 2010. SEAD partners work together in voluntary activities to: (1) ?raise the efficiency ceiling? by pulling super-efficient appliances and equipment into the market through cooperation on measures like incentives, procurement, awards, and research and development (R&D) investments; (2) ?raise the efficiency floor? by working together to bolster national or regional policies like minimum efficiency standards; and (3) ?strengthen the efficiency foundations? of programs by coordinating technical work to support these activities. Although not all SEAD partners may decide to participate in every SEAD activity, SEAD partners have agreed to engage actively in their particular areas of interest through commitment of financing, staff, consultant experts, and other resources. In addition, all SEAD partners are committed to share information, e.g., on implementation schedules for and the technical detail of minimum efficiency standards and other efficiency programs. Information collected and created through SEAD activities will be shared among all SEAD partners and, to the extent appropriate, with the global public.As of April 2011, the governments participating in SEAD are: Australia, Brazil, Canada, the European Commission, France, Germany, India, Japan, Korea, Mexico, Russia, South Africa, Sweden

  19. Energy drink consumption and increased risk for alcohol dependence

    Science.gov (United States)

    Arria, Amelia M.; Caldeira, Kimberly M.; Kasperski, Sarah J.; Vincent, Kathryn B.; Griffiths, Roland R.; O'Grady, Kevin E.

    2010-01-01

    Background Energy drinks are highly caffeinated beverages that are increasingly consumed by young adults. Prior research has established associations between energy drink use and heavier drinking and alcohol-related problems among college students. This study investigated the extent to which energy drink use might pose additional risk for alcohol dependence over and above that from known risk factors. Methods Data were collected via personal interview from 1,097 fourth-year college students sampled from one large public university as part of an ongoing longitudinal study. Alcohol dependence was measured with DSM-IV criteria. Results After adjustment for the sampling design, 51.3%wt of students were classified as “low-frequency” energy drink users (1 to 51 days in the past year) and 10.1%wt as “high-frequency” users (≥52 days). Typical caffeine consumption varied widely depending on the brand consumed. Compared to the low-frequency group, high-frequency users drank alcohol more frequently (141.6 vs. 103.1 days) and in higher quantities (6.15 vs. 4.64 drinks/typical drinking day). High-frequency users were at significantly greater risk for alcohol dependence relative to both non-users (AOR=2.40, 95% CI=1.27-4.56, p=.007) and low-frequency users (AOR=1.86, 95% CI=1.10, 3.14, p=.020), even after holding constant demographics, typical alcohol consumption, fraternity/sorority involvement, depressive symptoms, parental history of alcohol/drug problems, and childhood conduct problems. Low-frequency energy drink users did not differ from non-users on their risk for alcohol dependence. Conclusions Weekly or daily energy drink consumption is strongly associated with alcohol dependence. Further research is warranted to understand the possible mechanisms underlying this association. College students who frequently consume energy drinks represent an important target population for alcohol prevention. PMID:21073486

  20. A Low Energy Consumption Storage Method for Cloud Video Surveillance Data Based on SLA Classification

    Directory of Open Access Journals (Sweden)

    Yonghua Xiong

    2016-01-01

    Full Text Available With the continuous expansion of the amount of data with time in mobile video applications such as cloud video surveillance (CVS, the increasing energy consumption in video data centers has drawn widespread attention for the past several years. Addressing the issue of reducing energy consumption, we propose a low energy consumption storage method specially designed for CVS systems based onthe service level agreement (SLA classification. A novel SLA with an extra parameter of access time period is proposed and then utilized as a criterion for dividing virtual machines (VMs and data storage nodes into different classifications. Tasks can be scheduled in real time for running on the homologous VMs and data storage nodes according to their access time periods. Any nodes whose access time periods do not encompass the current time will be placed into the energy saving state while others are in normal state with the capability of undertaking tasks. As a result, overall electric energy consumption in data centers is reduced while the SLA is fulfilled. To evaluate the performance, we compare the method with two related approaches using the Hadoop Distributed File System (HDFS. The results show the superiority and effectiveness of our method.

  1. Energy Method in Stretch Reducing Process of Steel Tube

    Institute of Scientific and Technical Information of China (English)

    ZHANG Fang-ping; SUN Bin-yu; WANG Jian-mei

    2008-01-01

    According to the theories for stretch reducing process and steel tube plastic deformation,the energy method was used To mesh the rolled deformation zone of the steel tube into the upper limit elements,and an admissible velocity field was constructed to deduce a series of formulas of the inner virtual power consumption of deformed bodies.The rolling force during the stretch reducing process could be obtained by optimizing the upper limit power,which could provide guidelines for a proper choice of the stretch reducing process and devices for steel tube companies,as well as new products and devices.

  2. Energy consumption quota management of Wanda commercial buildings in China

    Science.gov (United States)

    Sun, D. B.; Xiao, H.; Wang, X.; Liu, J. J.; Wang, X.; Jin, X. Q.; Wang, J.; Xie, X. K.

    2016-08-01

    There is limited research of commercial buildings’ energy use data conducted based on practical analysis in China nowadays. Some energy consumption quota tools like Energy Star in U.S or VDI 3807 in Germany have limitation in China's building sector. This study introduces an innovative methodology of applying energy use quota model and empirical management to commercial buildings, which was in accordance of more than one hundred opened shopping centers of a real estate group in China. On the basis of statistical benchmarking, a new concept of “Modified coefficient”, which considers weather, occupancy, business layout, operation schedule and HVAC efficiency, is originally introduced in this paper. Our study shows that the average energy use quota increases from north to south. The average energy use quota of sample buildings is 159 kWh/(m2.a) of severe cold climate zone, 179 kWh/(m2.a) of cold zone, 188 kWh/(m2.a) of hot summer and cold winter zone, and 200 kWh/(m2.a) of hot summer and warm winter zone. The energy use quota model has been validated in the property management for year 2016, providing a new method of commercial building energy management to the industry. As a key result, there is 180 million energy saving potential based on energy quota management in 2016, equals to 6.2% saving rate of actual energy use in 2015.

  3. Building environment assessment and energy consumption estimation using smart phones

    Science.gov (United States)

    Li, Xiangli; Zhang, Li; Jia, Yingqi; Wang, Zihan; Jin, Xin; Zhao, Xuefeng

    2017-04-01

    In this paper, an APP for building indoor environment evaluation and energy consumption estimation based on Android platform is proposed and established. While using the APP, the smart phone built-in sensors are called for real-time monitoring of the building environmental information such as temperature, humidity and noise, etc. the built-in algorithm is developed to calculate the heat and power consumption, and questionnaires, grading and other methods are used to feed back to the space heating system. In addition, with the application of the technology of big data and cloud technology, the data collected by users will be uploaded to the cloud. After the statistics of the uploaded data, regional difference can be obtained, thus providing a more accurate basis for macro-control and research of energy, thermal comfort, greenhouse effect.

  4. Various multistage ensembles for prediction of heating energy consumption

    Directory of Open Access Journals (Sweden)

    Radisa Jovanovic

    2015-04-01

    Full Text Available Feedforward neural network models are created for prediction of daily heating energy consumption of a NTNU university campus Gloshaugen using actual measured data for training and testing. Improvement of prediction accuracy is proposed by using neural network ensemble. Previously trained feed-forward neural networks are first separated into clusters, using k-means algorithm, and then the best network of each cluster is chosen as member of an ensemble. Two conventional averaging methods for obtaining ensemble output are applied; simple and weighted. In order to achieve better prediction results, multistage ensemble is investigated. As second level, adaptive neuro-fuzzy inference system with various clustering and membership functions are used to aggregate the selected ensemble members. Feedforward neural network in second stage is also analyzed. It is shown that using ensemble of neural networks can predict heating energy consumption with better accuracy than the best trained single neural network, while the best results are achieved with multistage ensemble.

  5. A Unified Monitoring Framework for Energy Consumption and Network Traffic

    Directory of Open Access Journals (Sweden)

    Florentin Clouet

    2015-08-01

    Full Text Available Providing experimenters with deep insight about the effects of their experiments is a central feature of testbeds. In this paper, we describe Kwapi, a framework designed in the context of the Grid'5000 testbed, that unifies measurements for both energy consumption and network traffic. Because all measurements are taken at the infrastructure level (using sensors in power and network equipment, using this framework has no dependencies on the experiments themselves. Initially designed for OpenStack infrastructures, the Kwapi framework allows monitoring and reporting of energy consumption of distributed platforms. In this article, we present the extension of Kwapi to network monitoring, and outline how we overcame several challenges: scaling to a testbed the size of Grid'5000 while still providing high-frequency measurements; providing long-term loss-less storage of measurements; handling operational issues when deploying such a tool on a real infrastructure.

  6. FDI, Economic Growth, Energy Consumption & Environmental Nexus in Bangladesh

    Directory of Open Access Journals (Sweden)

    Sandip SARKER

    2016-04-01

    Full Text Available This paper attempts to investigate the relationship among economic growth, energy consumption, CO2 emission, FDI and natural gas usage in Bangladesh through co-integration and Vector Error Correction model (VECM over the period 1978 to 2010. Using ADP unit root tests it is found that all the four variables are integrated in first difference. The Johansen co-integration tests indicate that there is existence of long-run relationship among the variables. The VECM long run causality model indicates that there is a long run causality running from energy consumption and natural gas usage by industrial sector to GDP as well as from CO2 emission to FDI. Likewise in the short run a causal relationships have also been found among the variables. Moreover our model is found be error free based on several statistical test. Our results provide important policy suggestions regarding our foreign direct investment, environmental issues and economic growth nexus in Bangladesh.

  7. Reducing energy costs in nursing homes

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The handbook presents ideas and techniques for energy conservation in nursing homes. Case studies were developed of nursing homes located in different parts of the US. The typical nursing home assessed was proprietary, of intermediate-care level, medicaid-certified, and had less than 200 beds. Specific energy conservation measures were analyzed to determine the energy and dollar savings that could be realized. These include reducing heat loss through the building shell; reducing hot water costs; recovering the heat generated by dryers; reducing lighting costs; reducing heating and cooling costs, and analyzing fuels and fuel rates. A case for converting electric clothes dryers to gas was analyzed. (MCW)

  8. The Role of Technical Innovation and Sustainability on Energy Consumption: A Case Study on the Taiwanese Automobile Industry

    Directory of Open Access Journals (Sweden)

    Chao-Wu Chou

    2015-06-01

    Full Text Available The impact of global warming and climate change is one of the most critical challenges of the 21st century. The greenhouse effect caused by technological development and industrial pollution has accelerated the speed of global warming. The continuous improvement in automobile energy consumption is one of the most effective ways to reduce global warming. A comparative analysis is proposed to examine the various automobiles that utilize technological innovation to improve their energy consumption. Their contribution to CO2 emissions is then investigated. This study focuses on technical innovation and output power of a conventional engine. The results indicate that innovative engines (such as the Ford turbo petrol/diesel engine, the EcoBoost/TDCi have improved energy consumption and reduce CO2 emissions. In addition, the Toyota hybrid vehicles have also improved energy consumption and reduced greenhouse gases emissions.

  9. Long Term Energy Consumption Forecasting Using Genetic Programming

    OpenAIRE

    KARABULUT, Korhan; Alkan, Ahmet; YILMAZ, Ahmet

    2008-01-01

    Managing electrical energy supply is a complex task. The most important part of electric utility resource planning is forecasting of the future load demand in the regional or national service area. This is usually achieved by constructing models on relative information, such as climate and previous load demand data. In this paper, a genetic programming approach is proposed to forecast long term electrical power consumption in the area covered by a utility situated in the southeast of Turkey. ...

  10. Low Calorie Beverage Consumption Is Associated with Energy and Nutrient Intakes and Diet Quality in British Adults

    OpenAIRE

    Gibson, Sigrid A.; Horgan, Graham W.; Francis, Lucy E.; Amelia A. Gibson; Stephen, Alison M

    2016-01-01

    It is unclear whether consumption of low-calorie beverages (LCB) leads to compensatory consumption of sweet foods, thus reducing benefits for weight control or diet quality. This analysis investigated associations between beverage consumption and energy intake and diet quality of adults in the UK National Diet and Nutrition Survey (NDNS) (2008–2011; n = 1590), classified into: (a) non-consumers of soft drinks (NC); (b) LCB consumers; (c) sugar-sweetened beverage (SSB) consumers; or (d) consum...

  11. Dynamic simulation of energy consumption in mixed traffic flow considering highway toll station

    Science.gov (United States)

    Qian, Yong-Sheng; Zhang, Xiao-Long; Zeng, Jun-Wei; Shao, Xiao-Ming; Wang, Neng

    2015-01-01

    An improved model of energy consumption including toll station is presented in this paper. Using the model, we study the influences of mixed ratio, the idling energy consumption of vehicle, vehicle peak velocity, dwell time and random deceleration probability on energy consumption of Electronic Toll Collection or Manual Toll Collection mixed traffic flow on single lane under periodic condition. Simulating results indicate that the above five parameters are all increasing functions of total energy consumption, in which the idling energy consumption represents the major amounts with the increase of mixed ratio and occupancy rate. Thus, the existence of toll station has significant effect on the energy consumption of mixed traffic flow.

  12. Energy and Protein Consumption of Manggadong Rice as Local Wisdom and Effort of Staple Food Diversification

    Directory of Open Access Journals (Sweden)

    Evawany Aritonang

    2015-04-01

    Full Text Available Carbohydrates as one of the macro nutrients have significant role in the food pattern in which 60-70% of the recommended energy requirement comes from carbohydrates, and generally being a staple food. It is unfortunate that almost all people in Indonesia have made rice as the main source of carbohydrates and became a staple food. This situation affects the high dependence on rice. This study aims to modify manggadong as local wisdom into manggadong rice that is rice mixed with 4 types of cassava flour in cooking rice and analyze energy consumption and protein from manggadong rice. Intervention has 100 mothers as a sample. The results showed that the consumption of energy and protein manggadong rice of 4 types of cassava are arround 691 kcal - 729 kcal and 12.7 to 12.9 g. Manggadong rice consumption can reduce the consumption of energy and protein than rice without cassava flour. It recommended socialization of manggadong rice in society in order to be applied in staple food consumption to support food diversification program as an effort to create a household food security. Food industry must be support to provide cassava flour to facilitate the application of manggadong rice.

  13. Issues of geothermal and biomass energy efficiency in agriculture, industry, transports and domestic consumption

    Directory of Open Access Journals (Sweden)

    Cornelia Nistor

    2014-12-01

    Full Text Available Increasing energy efficiency should be a concern for both the firm managers and any leader at any level, given that energy efficiency significantly reduce production costs. An important aspect of this is the use of renewable energy sources, in different types of activities, depending on the possibilities to produce it on favorable terms, to supply at relatively low costs and to efficiently consume it both in the producing units and the households. A skilful and powerful leader will seek and support, through its influence, all the means that determine the reduction of the production costs and obtain a profit as high as possible. Wider use of renewable energy promotes concern for the environment through clean energy, for reducing pollution and for facilitate, in some cases, even the increase of the production with the same costs or lower costs. In agriculture, industry, transports and household consumption, a high importance presents the geothermal energy and the biomass as source of energy.

  14. Energy consumptions in existing buildings; Les consommations d'energie des batiments existants

    Energy Technology Data Exchange (ETDEWEB)

    Nuss, St. [Ecole Nationale Superieure des Arts et Industries de Strasbourg, 78 - Saint-Remy-Les-Chevreuse (France)]|[Costic, 78 - Sainte Remy les Chevreuses (France)

    2002-05-01

    This document presents a sectoral analysis of the energy consumptions in existing French buildings: 1) - residential sector: social buildings, private dwellings; 2) - tertiary sector: office buildings, hotels, commercial buildings, school buildings, hospitals; 3) - industry; 4) - general status. (J.S.)

  15. Forecast errors in IEA-countries' energy consumption

    DEFF Research Database (Denmark)

    Linderoth, Hans

    2002-01-01

    Every year Policy of IEA Countries includes a forecast of the energy consumption in the member countries. Forecasts concerning the years 1985,1990 and 1995 can now be compared to actual values. The second oil crisis resulted in big positive forecast errors. The oil price drop in 1986 did not have...... the small value is often the sum of large positive and negative errors. Almost no significant correlation is found between forecast errors in the 3 years. Correspondingly, no significant correlation coefficient is found between forecasts errors in the 3 main energy sectors. Therefore, a relatively small...

  16. The water footprint of energy consumption: an assessment of water requirements of primary energy carriers

    NARCIS (Netherlands)

    Gerbens-Leenes, P.W.; Hoekstra, A.Y.; Van der Meer, T.H.

    2007-01-01

    Gerbens-Leenes, P.W., Hoekstra, A.Y., Van der Meer, T.H., 2007. The water footprint of energy consumption: an assessment of water requirements of primary energy carriers. In: proceedings ‘First World Water Sustainability-Renewable Energy Congress and Exhibition’. 25-28 November 2007, Maastricht, the

  17. The water footprint of energy consumption: an assessment of water requirements of primary energy carriers

    NARCIS (Netherlands)

    Gerbens-Leenes, P.W.; Hoekstra, A.Y.; Van der Meer, T.H.

    2007-01-01

    Gerbens-Leenes, P.W., Hoekstra, A.Y., Van der Meer, T.H., 2007. The water footprint of energy consumption: an assessment of water requirements of primary energy carriers. In: proceedings ‘First World Water Sustainability-Renewable Energy Congress and Exhibition’. 25-28 November 2007, Maastricht, the

  18. Modeling GHG emission and energy consumption in selected greenhouses in Iran

    Energy Technology Data Exchange (ETDEWEB)

    Yousefi, M.; Omid, M.; Rafiee, SH.; Khoshnevisan, B. [Department of Agricultural Machinery Engineering, Faculty of Agricultural Engineering and Technology, University of Tehran, Karaj (Iran, Islamic Republic of)

    2013-07-01

    It is crucial to determine energy efficiency and environmental effects of greenhouse productions. Such study can be a viable solution in probing challenges and existing defects. The aims of this study were to analyze energy consumption and greenhouse gas (GHG) emissions for pepper production using biological method inside greenhouses which used natural gas (NG) heating system in Esfahan province. Data were collected from 22 greenhouse holders using a face to face questionnaire method, in 2010-2011. Also, functional area was selected 1000 m2. Total energy input, total energy output, energy ratio, energy productivity, specific energy, net energy gain and total GHG emissions were calculated as 297799.9 MJ area-1, 3851.84 MJ area-1, 0.013, 0.016 kg MJ-1, 61.85 MJ kg-1, -293948 MJ area-1 and 14390.85 kg CO2 equivalent area-1, respectively. Result revealed that replacing diesel fuel with NG will not be an effective way of reducing energy consumption for greenhouse production. However, it is crucial to focus on energy management in order to enhance the energy and environmental indices. One way to supply adequate input energy and a reduction in GHG emissions is the utilization of renewable and clean energy sources instead of NG and diesel fuel. Also, it is suggested to adopt solar greenhouses in the region and to supply electricity from non-fossil sources seriously.

  19. Frequent ice cream consumption is associated with reduced striatal response to receipt of an ice cream-based milkshake.

    Science.gov (United States)

    Burger, Kyle S; Stice, Eric

    2012-04-01

    Weight gain leads to reduced reward-region responsivity to energy-dense food receipt, and consumption of an energy-dense diet compared with an isocaloric, low-energy-density diet leads to reduced dopamine receptors. Furthermore, phasic dopamine signaling to palatable food receipt decreases after repeated intake of that food, which collectively suggests that frequent intake of an energy-dense food may reduce striatal response to receipt of that food. We tested the hypothesis that frequent ice cream consumption would be associated with reduced activation in reward-related brain regions (eg, striatum) in response to receipt of an ice cream-based milkshake and examined the influence of adipose tissue and the specificity of this relation. Healthy-weight adolescents (n = 151) underwent fMRI during receipt of a milkshake and during receipt of a tasteless solution. Percentage body fat, reported food intake, and food craving and liking were assessed. Milkshake receipt robustly activated the striatal regions, yet frequent ice cream consumption was associated with a reduced response to milkshake receipt in these reward-related brain regions. Percentage body fat, total energy intake, percentage of energy from fat and sugar, and intake of other energy-dense foods were not related to the neural response to milkshake receipt. Our results provide novel evidence that frequent consumption of ice cream, independent of body fat, is related to a reduction in reward-region responsivity in humans, paralleling the tolerance observed in drug addiction. Data also imply that intake of a particular energy-dense food results in attenuated reward-region responsivity specifically to that food, which suggests that sensory aspects of eating and reward learning may drive the specificity.

  20. Frequent ice cream consumption is associated with reduced striatal response to receipt of an ice cream–based milkshake123

    Science.gov (United States)

    Stice, Eric

    2012-01-01

    Background: Weight gain leads to reduced reward-region responsivity to energy-dense food receipt, and consumption of an energy-dense diet compared with an isocaloric, low-energy-density diet leads to reduced dopamine receptors. Furthermore, phasic dopamine signaling to palatable food receipt decreases after repeated intake of that food, which collectively suggests that frequent intake of an energy-dense food may reduce striatal response to receipt of that food. Objective: We tested the hypothesis that frequent ice cream consumption would be associated with reduced activation in reward-related brain regions (eg, striatum) in response to receipt of an ice cream–based milkshake and examined the influence of adipose tissue and the specificity of this relation. Design: Healthy-weight adolescents (n = 151) underwent fMRI during receipt of a milkshake and during receipt of a tasteless solution. Percentage body fat, reported food intake, and food craving and liking were assessed. Results: Milkshake receipt robustly activated the striatal regions, yet frequent ice cream consumption was associated with a reduced response to milkshake receipt in these reward-related brain regions. Percentage body fat, total energy intake, percentage of energy from fat and sugar, and intake of other energy-dense foods were not related to the neural response to milkshake receipt. Conclusions: Our results provide novel evidence that frequent consumption of ice cream, independent of body fat, is related to a reduction in reward-region responsivity in humans, paralleling the tolerance observed in drug addiction. Data also imply that intake of a particular energy-dense food results in attenuated reward-region responsivity specifically to that food, which suggests that sensory aspects of eating and reward learning may drive the specificity. PMID:22338036

  1. Global Inequality in Energy Consumption from 1980 to 2010

    CERN Document Server

    Lawrence, Scott; Yakovenko, Victor M

    2013-01-01

    We study the global probability distribution of energy consumption per capita around the world using data from the U.S. Energy Information Administration (EIA) for 1980-2010. We find that the Lorenz curves have moved up during this time period, and the Gini coefficient G has decreased from 0.66 in 1980 to 0.55 in 2010, indicating a decrease in inequality. The global probability distribution of energy consumption per capita in 2010 is close to the exponential distribution with G=0.5. We attribute this result to the globalization of the world economy, which mixes the world and brings it closer to the state of maximal entropy. We argue that global energy production is a limited resource that is partitioned among the world population. The most probable partition is the one that maximizes entropy, thus resulting in the exponential distribution function. A consequence of the latter is the law of 1/3: the top 1/3 of the world population consumes 2/3 of produced energy. We also find similar results for the global pro...

  2. Global Inequality in Energy Consumption from 1980 to 2010

    Directory of Open Access Journals (Sweden)

    Scott Lawrence

    2013-12-01

    Full Text Available We study the global probability distribution of energy consumption per capita around the world using data from the U.S. Energy Information Administration (EIA for 1980–2010. We find that the Lorenz curves have moved up during this time period, and the Gini coefficient, G, has decreased from 0.66 in 1980 to 0.55 in 2010, indicating a decrease in inequality. The global probability distribution of energy consumption per capita in 2010 is close to the exponential distribution withG = 0:5. We attribute this result to the globalization of the world economy, which mixes the world and brings it closer to the state of maximal entropy. We argue that global energy production is a limited resource that is partitioned among the world population. The most probable partition is the one that maximizes entropy, thus resulting in the exponential distribution function. A consequence of the latter is the law of 1/3: the top 1/3 of the world population consumes 2/3 of produced energy. We also find similar results for the global probability distribution of CO2 emissions per capita.

  3. Solar Adoption and Energy Consumption in the Residential Sector

    Science.gov (United States)

    McAllister, Joseph Andrew

    This dissertation analyzes the energy consumption behavior of residential adopters of solar photovoltaic systems (solar-PV). Based on large data sets from the San Diego region that have been assembled or otherwise acquired by the author, the dissertation quantifies changes in energy consumption after solar-PV installation and determines whether certain household characteristics are correlated with such changes. In doing so, it seeks to answer two related questions: First, "Do residential solar adopters increase or decrease their electricity consumption after they install a solar-PV system?" Assuming that certain categories of residential adopters increase and others decrease, the second question is "Which residential adopters increase and which decrease their consumption and why?" The database that was used to conduct this analysis includes information about 5,243 residential systems in San Diego Gas & Electric's (SDG&E) service territory installed between January 2007 and December 2010. San Diego is a national leader in the installation of small-scale solar-electric systems, with over 12,000 systems in the region installed as of January 2012, or around 14% of the total number installed in California. The author performed detailed characterization of a significant subset of the solar installations in the San Diego region. Assembled data included technical and economic characteristics of the systems themselves; the solar companies that sold and installed them; individual customer electric utility billing data; metered PV production data for a subgroup of these solar systems; and data about the properties where the systems are located. Primarily, the author was able to conduct an electricity consumption analysis at the individual household level for 2,410 PV systems installed in SDG&E service territory between January 2007 and December 2010. This analysis was designed to detect changes in electricity consumption from the pre-solar to the post-installation period. To

  4. Three essays in energy consumption: Time series analyses

    Science.gov (United States)

    Ahn, Hee Bai

    1997-10-01

    Firstly, this dissertation investigates that which demand specification is an appropriate model for long-run energy demand between the conventional demand specification and the limited demand specification. In order to determine the components of a stable long-run demand for different sectors of the energy industry, I perform cointegration tests by using the Johansen test procedure. First, I test the conventional demand specification including prices and income as components. Second, I test a limited demand specification only income as a component. The reason for performing these tests is that we can determine that which demand specification is a good long-run predictor of energy consumption between the two demand specifications by using the cointegration tests. Secondly, for the purpose of planning and forecasting energy demand in case of cointegrated system, long-run elasticities are of particular interest. To retrieve the optimal level of energy demand in case of price shock, we need long-run elasticities rather than short-run elasticities. The energy demand study provides valuable information to the energy policy makers who are concerned about the long-run impact of taxes and tariffs. A long-run price elasticity is a primary barometer of the substitution effect between energy and non-energy inputs and long-run income elasticity is an important factor since we can measure the energy demand growing slowly or fast than in the past depending on the magnitude of long-run elasticity. The one other problem in estimating the total energy demand is that there exists an aggregation bias stemming from the process of summation in four different energy types for the total aggregation prices and total aggregation energy consumption. In order to measure the aggregation bias between the Btu aggregation method and the Divisia Index method, i.e., which methodology has less aggregation bias in the long-run, I compare the two estimation results with calculated results estimated on

  5. Integrated Urban System and Energy Consumption Model: Residential Buildings

    Directory of Open Access Journals (Sweden)

    Rocco Papa

    2014-05-01

    Full Text Available This paper describes a segment of research conducted within the project PON 04a2_E Smart Energy Master for the energetic government of the territory conducted by the Department of Civil, Architectural and Environment Engineering, University of Naples "Federico II".  In particular, this article is part of the study carried out for the definition of the comprehension/interpretation model that correlates buildings, city’s activities and users’ behaviour in order to promote energy savings. In detail, this segment of the research wants to define the residential variables to be used in the model. For this purpose a knowledge framework at international level has been defined, to estimate the energy requirements of residential buildings and the identification of a set of parameters, whose variation has a significant influence on the energy consumption of residential buildings.

  6. Cowichan Valley energy mapping and modelling. Report 2 - Energy consumption and density mapping. Final report. [Vancouver Island, Canada

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-06-15

    The driving force behind the Integrated Energy Mapping and Analysis project was the identification and analysis of a suite of pathways that the Cowichan Valley Regional District (CVRD) can utilise to increase its energy resilience, as well as reduce energy consumption and GHG emissions, with a primary focus on the residential sector. Mapping and analysis undertaken will support provincial energy and GHG reduction targets, and the suite of pathways outlined will address a CVRD internal target that calls for 75% of the region's energy within the residential sector to come from locally sourced renewables by 2050. The target has been developed as a mechanism to meet resilience and climate action target. The maps and findings produced are to be integrated as part of a regional policy framework currently under development. The second task in the overall project was the mapping of regional energy consumption density. Combined with the findings from task one, this enables comparison of energy consumption density per area unit with the renewable energy resource availability. In addition, it provides an energy baseline against which future energy planning activities can be evaluated. The mapping of the energy consumption density was divided into categories to correspond with local British Columbia Assessment Authority (BCAA) reporting. The residential sub-categories were comprised of single family detached dwellings, single family attached dwellings, apartments, and moveable dwellings. For commercial and industrial end-users the 14 sub-categories are also in line with BCAA as well as the on-going provincial TaNDM project of which the CVRD is a partner. The results of task two are documented in this report. (LN)

  7. Consumption of reduced-fat products, haemostatic parameters and oral glucose tolerance test

    NARCIS (Netherlands)

    Velthuis - Wierik, E.J.M. te; Kluft, C.; Berg, H. van den; Weststrate, J.A.

    1996-01-01

    A high fat intake has been associated with the high prevalence of coronary heart disease (CHD) in most Western countries. Consumption of reduced-fat products might reduce fat intake and beneficially affect markers of CHD risk. Therefore, the effects of 6 months of realistic consumption of

  8. Application of the advanced engineering environment for optimization energy consumption in designed vehicles

    Science.gov (United States)

    Monica, Z.; Sękala, A.; Gwiazda, A.; Banaś, W.

    2016-08-01

    Nowadays a key issue is to reduce the energy consumption of road vehicles. In particular solution one could find different strategies of energy optimization. The most popular but not sophisticated is so called eco-driving. In this strategy emphasized is particular behavior of drivers. In more sophisticated solution behavior of drivers is supported by control system measuring driving parameters and suggesting proper operation of the driver. The other strategy is concerned with application of different engineering solutions that aid optimization the process of energy consumption. Such systems take into consideration different parameters measured in real time and next take proper action according to procedures loaded to the control computer of a vehicle. The third strategy bases on optimization of the designed vehicle taking into account especially main sub-systems of a technical mean. In this approach the optimal level of energy consumption by a vehicle is obtained by synergetic results of individual optimization of particular constructional sub-systems of a vehicle. It is possible to distinguish three main sub-systems: the structural one the drive one and the control one. In the case of the structural sub-system optimization of the energy consumption level is related with the optimization or the weight parameter and optimization the aerodynamic parameter. The result is optimized body of a vehicle. Regarding the drive sub-system the optimization of the energy consumption level is related with the fuel or power consumption using the previously elaborated physical models. Finally the optimization of the control sub-system consists in determining optimal control parameters.

  9. The Resource Configuration Method with Lower Energy Consumption Based on Prediction in Cloud Data Center

    Directory of Open Access Journals (Sweden)

    Quan Liang

    2014-07-01

    Full Text Available The cloud computing data center have numerous hosts as well as application requests. In future, the short response time and user Qos are required, and the lower electricity power consumption to build the low-carbon green network is an irrevocable trend. The paper first puts forward a reconfiguration framework based on the request prediction of Double Exponential Smoothing, On the basis, work out in advance the allocation scheme which can improve the resource utilization ratio as well as lower energy consumption. The paper also present a concept of Utility Ratio Matrix (URM to represent allocations of hosts and Virtual Machines (VMs and a reconfiguration algorithm. The algorithm can separate the reconfiguration computing from the real allocation so that it can avoid a time delay, and can also reduce the energy consumption in data center. The corresponding analysis and experimental results show the feasibility of the reconfiguration algorithm in this paper.

  10. Opportunities and insights for reducing fossil fuel consumption by households and organizations

    Science.gov (United States)

    Stern, Paul C.; Janda, Kathryn B.; Brown, Marilyn A.; Steg, Linda; Vine, Edward L.; Lutzenhiser, Loren

    2016-05-01

    Realizing the ambitious commitments of the 2015 Paris Climate Conference (COP21) will require new ways of meeting human needs previously met by burning fossil fuels. Technological developments will be critical, but so will accelerated adoption of promising low-emission technologies and practices. National commitments will be more achievable if interventions take into account key psychological, social, cultural and organizational factors that influence energy choices, along with factors of an infrastructural, technical and economic nature. Broader engagement of social and behavioural science is needed to identify promising opportunities for reducing fossil fuel consumption. Here we discuss opportunities for change in households and organizations, primarily at short and intermediate timescales, and identify opportunities that have been underused in much of energy policy. Based on this survey, we suggest design principles for interventions by governments and other organizations, and identify areas of emphasis for future social science and interdisciplinary research.

  11. A bi-objective model for job-shop scheduling problem to minimize both energy consumption and makespan

    Institute of Scientific and Technical Information of China (English)

    HE Yan; LIU Fei; CAO Hua-jun; LI Cong-bo

    2005-01-01

    The issue of reducing energy consumption for the job-shop scheduling problem in machining systems is addressed, whose dual objectives are to minimize both the energy consumption and the makespan. First, the biobjective model for the job-shop scheduling problem is proposed. The objective function value of the model represents synthesized optimization of energy consumption and makespan. Then, a heuristic algorithm is developed to locate the optimal or near optimal solutions of the model based on the Tabu search mechanism. Finally, the experimental case is presented to demonstrate the effectiveness of the proposed model and the algorithm.

  12. Measures to reduce car-fleet consumption - Estimation of effects; Massnahmen zur Absenkung des Flottenverbrauchs. Abschaetzung der Wirkung

    Energy Technology Data Exchange (ETDEWEB)

    Iten, R.; Hammer, S.; Keller, M.; Schmidt, N. [Infras, Zuerich (Switzerland); Sammer, K.; Wuestenhagen, R. [Institut fuer Wirtschaft und Oekologie (IWOE-HSG), Universitaet St. Gallen, St. Gallen (Switzerland)

    2005-09-15

    This comprehensive report for the Swiss Federal Office of Energy (SFOE) takes a look at the results of a study that estimated the effects of measures that were to be taken in order to reduce the fuel consumption of fleets of vehicles as part of the SwissEnergy programme. The research reported on aimed to estimate the effects of the Energy Label on energy consumption and research concerning the results to be expected from the introduction of a bonus-malus system. Questions reviewed include the effect of fuel consumption data on making decisions concerning which vehicle to purchase, the effects of the Energy Label on consumption, the awareness of other appropriate information sources, the possible effects of a bonus-malus system and how the effectiveness of the Energy Label could be improved. The answers and results obtained are reviewed and commented on. Finally, an overall appraisal of the situation is presented and recommendations for increasing the effectiveness of the Energy Label are made

  13. Study on Relationship of Energy Consumption and Economic Growth in China

    Science.gov (United States)

    Zhang-wei, Li; Xun-gang, Zheng

    Energy is one of the most basic materials of the national economy, which plays an important role in national productin and life. The relationship between energy consumption and economic growth has been a fascinating question since energy crisis in 70s of last century. This paper analyzes the relationship between energy consumption and economic development based on the VAR model using temporal series of China from 1990 to 2009, then uses impulse response function and variance decomposition to portray the correlations between economic growth and energy consumption. The result shows that there exists a unidirectional causality from energy consumption to gross domestic product and energy consumption can observably promote the development of economy.

  14. Galloping Trajectory Generation of a Legged Transport Robot Based on Energy Consumption Optimization

    Directory of Open Access Journals (Sweden)

    Yaguang Zhu

    2016-01-01

    Full Text Available Legged walking robots have very strong operation ability in the complex surface and they are very suitable for transportation of tools, materials, and equipment in unstructured environment. Aiming at the problems of energy consumption of legged transport robot during the fast moving, a method of galloping trajectory planning based on energy consumption optimization is proposed. By establishing transition angle polynomials of flight phase, lift-off phase, and stance phase and constraint condition between each state phase, the locomotion equations of the ellipse trajectory are derived. The transition angle of each state phase is introduced into the system energy consumption equations, and the energy optimization index based on transition angles is established. Inverse kinematics solution and trajectory planning in one gait cycle are applied to genetic algorithm process to solve the nonlinear programming problem. The results show that the optimized distribution of transition angles of state phases is more reasonable, and joint torques and system energy consumption are reduced effectively. Thus, the method mentioned above has a great significance to realize fast operation outdoors of transport robot.

  15. Household direct energy consumption and CO2 emissions in European countries.

    NARCIS (Netherlands)

    Meirmans, Koen

    2013-01-01

    SUMMARY Household direct energy consumption is often regarded as a given and determined using a top-down approach. Furthermore, research regarding household energy consumption tends to focus on western countries. This research uses a bottom-up approach t

  16. Arginine consumption by the intestinal parasite Giardia intestinalis reduces proliferation of intestinal epithelial cells.

    Science.gov (United States)

    Stadelmann, Britta; Merino, María C; Persson, Lo; Svärd, Staffan G

    2012-01-01

    In the field of infectious diseases the multifaceted amino acid arginine has reached special attention as substrate for the hosts production of the antimicrobial agent nitric oxide (NO). A variety of infectious organisms interfere with this part of the host immune response by reducing the availability of arginine. This prompted us to further investigate additional roles of arginine during pathogen infections. As a model we used the intestinal parasite Giardia intestinalis that actively consumes arginine as main energy source and secretes an arginine-consuming enzyme, arginine deiminase (ADI). Reduced intestinal epithelial cell (IEC) proliferation is a common theme during bacterial and viral intestinal infections, but it has never been connected to arginine-consumption. Our specific question was thereby, whether the arginine-consumption by Giardia leads to reduced IEC proliferation, in addition to NO reduction. In vitro cultivation of human IEC lines in arginine-free or arginine/citrulline-complemented medium, as well as in interaction with different G. intestinalis isolates, were used to study effects on host cell replication by MTT assay. IEC proliferation was further analyzed by DNA content analysis, polyamine measurements and expressional analysis of cell cycle regulatory genes. IEC proliferation was reduced upon arginine-withdrawal and also in an arginine-dependent manner upon interaction with G. intestinalis or addition of Giardia ADI. We show that arginine-withdrawal by intestinal pathogens leads to a halt in the cell cycle in IECs through reduced polyamine levels and upregulated cell cycle inhibitory genes. This is of importance with regards to intestinal tissue homeostasis that is affected through reduced cell proliferation. Thus, the slower epithelial cell turnover helps the pathogen to maintain a more stable niche for colonization. This study also shows why supplementation therapy of diarrhea patients with arginine/citrulline is helpful and that

  17. Arginine consumption by the intestinal parasite Giardia intestinalis reduces proliferation of intestinal epithelial cells.

    Directory of Open Access Journals (Sweden)

    Britta Stadelmann

    Full Text Available In the field of infectious diseases the multifaceted amino acid arginine has reached special attention as substrate for the hosts production of the antimicrobial agent nitric oxide (NO. A variety of infectious organisms interfere with this part of the host immune response by reducing the availability of arginine. This prompted us to further investigate additional roles of arginine during pathogen infections. As a model we used the intestinal parasite Giardia intestinalis that actively consumes arginine as main energy source and secretes an arginine-consuming enzyme, arginine deiminase (ADI. Reduced intestinal epithelial cell (IEC proliferation is a common theme during bacterial and viral intestinal infections, but it has never been connected to arginine-consumption. Our specific question was thereby, whether the arginine-consumption by Giardia leads to reduced IEC proliferation, in addition to NO reduction. In vitro cultivation of human IEC lines in arginine-free or arginine/citrulline-complemented medium, as well as in interaction with different G. intestinalis isolates, were used to study effects on host cell replication by MTT assay. IEC proliferation was further analyzed by DNA content analysis, polyamine measurements and expressional analysis of cell cycle regulatory genes. IEC proliferation was reduced upon arginine-withdrawal and also in an arginine-dependent manner upon interaction with G. intestinalis or addition of Giardia ADI. We show that arginine-withdrawal by intestinal pathogens leads to a halt in the cell cycle in IECs through reduced polyamine levels and upregulated cell cycle inhibitory genes. This is of importance with regards to intestinal tissue homeostasis that is affected through reduced cell proliferation. Thus, the slower epithelial cell turnover helps the pathogen to maintain a more stable niche for colonization. This study also shows why supplementation therapy of diarrhea patients with arginine/citrulline is helpful

  18. Energy and water consumption of Pacific Northwest irrigation systems

    Energy Technology Data Exchange (ETDEWEB)

    King, L.D.; Wensink, R.B.; Wolfe, J.W.; Shearer, M.N.

    1977-09-01

    Irrigation in the Pacific Northwest is an energy-intensive process which represents a major part of the total energy used in farm level food production. Since 1950, several major developments have precipitated pronounced increases in irrigation energy requirements. For example, the invention of efficient high-lift pumps, labor-saving equipment, new uses for irrigation sprinklers, and profitable cropping patterns have substantially escalated irrigation energy consumption in the Pacific Northwest in the past 25 years. Until recently, energy prices have remained relatively low and constant. The next 25 years will continue to experience advanced irrigation technologies. In addition to technological development, however, the cost of energy and water will certainly rise while their availabilities become increasingly constrained. The depletion of ground water in several parts of the United States could also potentially increase the irrigation burden of the Pacific Northwest. Lastly, parts of the Pacific Northwest water supply are directly convertible to energy via hydroelectric generation. This study proposes to make realistic projections relative to present and future interactions of the above components.

  19. Energy Consumption Oriented Network-on-Chip Mapping Method

    Directory of Open Access Journals (Sweden)

    Feichao Wang

    2013-12-01

    Full Text Available In this paper, mapping algorithm has been mainly studied. The main work and contribution have been generalized as follows: Through the research of existing on-chip network mapping algorithm and global optimization algorithm, a multi-step mapping algorithm for low-power consumption have been designed, which is combined with the task allocation and the task scheduling. Compared with the traditional mapping algorithm, the algorithm in this paper takes the factors of task scheduling and allocation into account, mapping algorithm has three steps: task scheduling, IP core mapping and data block mapping. The simulation results show that the mapping method in this paper can effectively reduce Network-on-Chip (NoC power consumption

  20. Investigation of some pretreatments on energy and specific energy consumption drying of black mulberry

    Directory of Open Access Journals (Sweden)

    Adabi Esmaeili Mohammad

    2013-01-01

    Full Text Available Massive consumption of energy in drying industry makes it a matter of challenge regarding economical aspects and limited recourses. Several methods for drying including hot air convection, vacuum, infrared and hot air convection-infrared technologies were applied in order to estimate the consumed energy during the drying of mulberry fruit. Moreover, microwave heating, chemical (ethyl oleate and potassium, mechanical (ultrasonic and blanching (hot water pretreatments were compared. According to the Results, maximum energy consumption was recorded when no pretreatment was performed. Microwave heating in the hot air convection-infrared dryer resulted in the lowest consumption of energy. Total energy requirement decreased with the temperature in the convection dryer res. Conversely, energy increased with air velocity. The vacuum dryer consumed the highest amount of energy which was measured to be 46.95 kWh while the lowest energy was recorded with using infrared-convective dryers. Also Experimental results showed that minimum and maximum specific energy consumption in the drying of black mulberry were associated with microwave pretreatment in IR-hot air dryer and control treatment in vacuum dryer, respectively. The minimum color change (ΔE for drying of black mulberry was found in microwave pretreated samples dried with the vacuum dryer, yet maximum ΔE was observed in hot air dryer when no pretreatment was applied.

  1. Oral Morphine Consumption Reduces Lens Development in Rat Embryos

    Directory of Open Access Journals (Sweden)

    Hossein Bahadoran

    2012-07-01

    Full Text Available Objective: Consumption of morphine, during pregnancy, in addition to inducing defects in the mother’s nervous system function, caused defects or delays in the formation and evolution of embryonic visual system. In the present study, changes in lens development was assessed in embryos exposed in utero to morphine. Material and Methods: Female Wistar rats (250-300 g were mated with male rats and pregnancy was determined by sperm observation in vaginal smear. This day was considered as embryonic day zero (E0. The females were then divided randomly into the experimental and the control groups. The control group received tap water and the experimental group received morphine (0.05 mg/ml in their water. On embryonic day 13 ( E13, blood samples were collected from the retro-orbital sinus of all animals for plasma corticosterone detection. On embryonic day 17(E17, the animals were killed by an overdose of chloroform and the embryos were taken out surgically. The embryos were fixed in 10% formalin for 30 days. At this time, the head of the embryos were removed for tissue processing and Hematoxylin- Eosin (H&E staining. The samples were evaluated using light microscope and MOTIC software. Results: Our data indicated that plasma corticosterone level was dramatically increased and the lens was thinner in the experimental group. (Although the proliferation of lens cells increased in the experiment group but that lens had delay in removing the proliferated and elongation cells with abnormal density in the lateral part of the lens in compare with control group. I have no idea what the authors are stating here. Moreover, the opening of the eyelids was delayed in the off springs of the mothers who received morphine. Conclusions: This study showed that morphine consumption during pregnancy leads to defects in fetal visual system development, particularly in the lens, and eyelids.

  2. CAUSALITY AND DYNAMICS OF ENERGY CONSUMPTION AND OUTPUT: EVIDENCE FROM NON-OECD ASIAN COUNTRIES

    OpenAIRE

    RUHUL A. SALIM; Shuddhasattwa Rafiq; A. F. M. KAMRUL HASSAN

    2008-01-01

    This article examines the short-run and long-run causal relationship between energy consumption and output in six non-OECD Asian developing countries. Standard time series econometrics is used for this purpose. Based on cointegration and vector error correction modeling, the empirical result shows a bi-directional causality between energy consumption and income in Malaysia, while a unidirectional causality from output to energy consumption in China and Thailand and energy consumption to outpu...

  3. The updated algorithm of the Energy Consumption Program (ECP): A computer model simulating heating and cooling energy loads in buildings

    Science.gov (United States)

    Lansing, F. L.; Strain, D. M.; Chai, V. W.; Higgins, S.

    1979-01-01

    The energy Comsumption Computer Program was developed to simulate building heating and cooling loads and compute thermal and electric energy consumption and cost. This article reports on the new additional algorithms and modifications made in an effort to widen the areas of application. The program structure was rewritten accordingly to refine and advance the building model and to further reduce the processing time and cost. The program is noted for its very low cost and ease of use compared to other available codes. The accuracy of computations is not sacrificed however, since the results are expected to lie within + or - 10% of actual energy meter readings.

  4. Estimating the HVAC energy consumption of plug-in electric vehicles

    Science.gov (United States)

    Kambly, Kiran R.; Bradley, Thomas H.

    2014-08-01

    Plug in electric vehicles are vehicles that use energy from the electric grid to provide tractive and accessory power to the vehicle. Due to the limited specific energy of energy storage systems, the energy requirements of heating, ventilation, and air conditioning (HVAC) systems for cabin conditioning can significantly reduce their range between charges. Factors such as local ambient temperature, local solar radiation, local humidity, length of the trip and thermal soak have been identified as primary drivers of cabin conditioning loads and therefore of vehicle range. The objective of this paper is to develop a detailed systems-level approach to connect HVAC technologies and usage conditions to consumer-centric metrics of vehicle performance including energy consumption and range. This includes consideration of stochastic and transient inputs to the HVAC energy consumption model including local weather, solar loads, driving behavior, charging behavior, and regional passenger fleet population. The resulting engineering toolset is used to determine the summation of and geographical distribution of energy consumption by HVAC systems in electric vehicles, and to identify regions of US where the distributions of electric vehicle range are particularly sensitive to climate.

  5. Simulation of value stream mapping and discrete optimization of energy consumption in modular construction

    Science.gov (United States)

    Chowdhury, Md Mukul

    With the increased practice of modularization and prefabrication, the construction industry gained the benefits of quality management, improved completion time, reduced site disruption and vehicular traffic, and improved overall safety and security. Whereas industrialized construction methods, such as modular and manufactured buildings, have evolved over decades, core techniques used in prefabrication plants vary only slightly from those employed in traditional site-built construction. With a focus on energy and cost efficient modular construction, this research presents the development of a simulation, measurement and optimization system for energy consumption in the manufacturing process of modular construction. The system is based on Lean Six Sigma principles and loosely coupled system operation to identify the non-value adding tasks and possible causes of low energy efficiency. The proposed system will also include visualization functions for demonstration of energy consumption in modular construction. The benefits of implementing this system include a reduction in the energy consumption in production cost, decrease of energy cost in the production of lean-modular construction, and increase profit. In addition, the visualization functions will provide detailed information about energy efficiency and operation flexibility in modular construction. A case study is presented to validate the reliability of the system.

  6. Energy consumption during Refractance Window evaporation of selected berry juices

    Energy Technology Data Exchange (ETDEWEB)

    Nindo, C.I.; Tang, J. [Washington State University, Pullman, WA (United States). Dept. of Biological Systems Engineering; Powers, J.R. [Washington State University, Pullman, WA (United States). Dept. of Food Science and Human Nutrition; Bolland, K. [MCD Technologies, Tacoma, WA (United States)

    2004-07-01

    The Refractance Window evaporator represents a novel concept in the design of evaporation systems for small food processing plants. In this system thermal energy from circulating hot water is transmitted through a plastic sheet to evaporate water from a liquid product flowing concurrently on the top surface of the plastic. The objectives of this study were to investigate the heat transfer characteristics of this evaporator, determine its energy consumption, and capacity at different tilt angles and product flow rates. The system performance was evaluated with tap water, raspberry juice, and blueberry juice and puree as feed. With a direct steam injection heating method, the steam economy ranged from 0.64 to 0.84, while the overall heat transfer coefficient (U) was 666 W m{sup -2} {sup o}C{sup -1}. Under this condition, the highest evaporation capacity was 27.1 kg h{sup -1} m{sup -2} for blueberry juice and 31.8 kg h{sup -1} m{sup -2} for blueberry puree. The energy consumption was 2492-2719 kJ kg{sup -1} of water evaporated. Installation of a shell and tube heat exchanger with better temperature control minimized incidences of boiling and frequent discharge of condensate. The steam economy, highest evaporation rate and overall heat transfer coefficient increased to 0.99, 36.0 kg h{sup -1} m{sup -2} and 733 W m{sup -2} {sup o}C{sup -1}, respectively. [Author].

  7. Computational capacity and energy consumption of complex resistive switch networks

    Directory of Open Access Journals (Sweden)

    Jens Bürger

    2015-12-01

    Full Text Available Resistive switches are a class of emerging nanoelectronics devices that exhibit a wide variety of switching characteristics closely resembling behaviors of biological synapses. Assembled into random networks, such resistive switches produce emerging behaviors far more complex than that of individual devices. This was previously demonstrated in simulations that exploit information processing within these random networks to solve tasks that require nonlinear computation as well as memory. Physical assemblies of such networks manifest complex spatial structures and basic processing capabilities often related to biologically-inspired computing. We model and simulate random resistive switch networks and analyze their computational capacities. We provide a detailed discussion of the relevant design parameters and establish the link to the physical assemblies by relating the modeling parameters to physical parameters. More globally connected networks and an increased network switching activity are means to increase the computational capacity linearly at the expense of exponentially growing energy consumption. We discuss a new modular approach that exhibits higher computational capacities, and energy consumption growing linearly with the number of networks used. The results show how to optimize the trade-o between computational capacity and energy e ciency and are relevant for the design and fabrication of novel computing architectures that harness random assemblies of emerging nanodevices.

  8. Drivers behind energy consumption by rural households in Shanxi

    Directory of Open Access Journals (Sweden)

    Mette Wik

    2015-10-01

    Full Text Available Biomass is widely used by households for cooking and heating in rural China. Along with rapid economic growth over the last three decades, increasing rural households tend to use less biomass and more commercial energy such as coal and electricity. In this paper, we analyzed the key drivers behind energy consumption and switching by rural households based on survey data of energy consumption by rural households in ten villages of Shanxi province in China. Our econometric results show that income growth can induce less use of biomass and more use of coal and modern fuels. However, no evidence shows that even wealthy households has abandoned biomass use in Shanxi, mainly due to the “free” access to land and agricultural resources in these villages. Previous wealth of a household represented by house value can lead to more time spent on biomass collection. Access to land resources has positive effects on biomass use and collection. Other key variables include education, household size, the number of elderly members, and coal price. We also find huge differences between villages, indicating the importance of access to agricultural resources and markets.

  9. Efficient Energy Consumption Scheduling: Towards Effective Load Leveling

    Directory of Open Access Journals (Sweden)

    Yuan Hong

    2017-01-01

    Full Text Available Different agents in the smart grid infrastructure (e.g., households, buildings, communities consume energy with their own appliances, which may have adjustable usage schedules over a day, a month, a season or even a year. One of the major objectives of the smart grid is to flatten the demand load of numerous agents (viz. consumers, such that the peak load can be avoided and power supply can feed the demand load at anytime on the grid. To this end, we propose two Energy Consumption Scheduling (ECS problems for the appliances held by different agents at the demand side to effectively facilitate load leveling. Specifically, we mathematically model the ECS problems as Mixed-Integer Programming (MIP problems using the data collected from different agents (e.g., their appliances’ energy consumption in every time slot and the total number of required in-use time slots, specific preferences of the in-use time slots for their appliances. Furthermore, we propose a novel algorithm to efficiently and effectively solve the ECS problems with large-scale inputs (which are NP-hard. The experimental results demonstrate that our approach is significantly more efficient than standard benchmarks, such as CPLEX, while guaranteeing near-optimal outputs.

  10. Sufficiency does energy consumption become a moral issue?

    Energy Technology Data Exchange (ETDEWEB)

    Muller, Adrian (Socio-economic Inst. and Univ. Research Priority Programme in Ethics, Univ. of Zuerich, Zuerich (Switzerland))

    2009-07-01

    Reducing the externalities from energy use is crucial for sustainability. There are basically four ways to reduce externalities from energy use: increasing technical efficiency ('energy input per unit energy service'), increasing economic efficiency ('internalising external costs'), using 'clean' energy sources with few externalities, or sufficiency ('identifying 'optimal' energy service levels'). A combination of those strategies is most promising for sustainable energy systems. However, the debate on sustainable energy is dominated by efficiency and clean energy strategies, while sufficiency plays a minor role. Efficiency and clean energy face several problems, though. Thus, the current debate should be complemented with a critical discussion of sufficiency. In this paper, I develop a concept of sufficiency, which is adequate for liberal societies. I focus on ethical foundations for sufficiency, as the discussion of such is missing or cursory only in the existing literature. I first show that many examples of sufficiency can be understood as (economic) efficiency, but that the two concepts do not coincide. I then show that sufficiency based on moralization of actions can be understood as implementation of the boundary conditions for social justice that come with notions of liberal societies, in particular the duty not to harm other people. By this, to increase sufficiency becomes a duty beyond individual taste. I further illustrate this in the context of the adverse effects of climate change as externalities from energy use.

  11. Energy Efficient Optical Networks with Minimized Non-Renewable Power Consumption

    Directory of Open Access Journals (Sweden)

    Xiaowen Dong

    2012-05-01

    Full Text Available Recent studies have shown that the Information and Communication Technology (ICT industry is responsible for about 2% of the global emission of CO2 and this percentage is expected to increase as the internet expands in bandwidth and reach. In this paper we propose a hybrid-power IP over WDM network where renewable energy is used to reduce the CO2 emission of IP over WDM networks. A Linear Programming (LP model and a novel heuristic are developed to minimize the non-renewable power consumption in the “hybrid-power” IP over WDM network. The performance of the network is studied considering two topologies, the NSFNET and the USNET. Compared with routing in the electronic layer, the results show that routing in the optical layer coupled with using renewable energy significantly reduces the CO2 emissions of the IP over WDM network by up to 73% for the NSFNET and 69% for the USNET, and the proposed heuristic has little impact on the QoS. We also develop an LP model to identify the impact of the location of nodes employing renewable energy on the non-renewable power consumption of the network. The results show that the optimum location of nodes employing renewable energy is determined according to the output power of the renewable energy sources and the power consumption of the nodes.

  12. 75 FR 66008 - Fossil Fuel-Generated Energy Consumption Reduction for New Federal Buildings and Major...

    Science.gov (United States)

    2010-10-27

    ... Parts 433 and 435 RIN 1904-AB96 Fossil Fuel-Generated Energy Consumption Reduction for New Federal... proposed rulemaking (NOPR) regarding the fossil fuel- generated energy consumption ] requirements for new... regarding the fossil fuel-generated energy consumption requirements for new Federal buildings and...

  13. 16 CFR 305.5 - Determinations of estimated annual energy consumption, estimated annual operating cost, and...

    Science.gov (United States)

    2010-01-01

    ... consumption, estimated annual operating cost, and energy efficiency rating, and of water use rate. 305.5... RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND... § 305.5 Determinations of estimated annual energy consumption, estimated annual operating cost, and...

  14. On-site energy consumption and selected emissions at softwood sawmills in the southwestern United States

    Science.gov (United States)

    Dan Loeffler; Nathaniel Anderson; Todd A. Morgan; Colin B. Sorenson

    2016-01-01

    Presently there is a lack of information describing US southwestern energy consumption and emissions generated from the sawmilling industry. This article uses a mail survey of softwood sawmills in the states of Arizona, Colorado, and New Mexico to develop a profile of on-site energy consumption and selected emissions for the industry. Energy consumption is...

  15. Climate impacts on extreme energy consumption of different types of buildings.

    Directory of Open Access Journals (Sweden)

    Mingcai Li

    Full Text Available Exploring changes of building energy consumption and its relationships with climate can provide basis for energy-saving and carbon emission reduction. Heating and cooling energy consumption of different types of buildings during 1981-2010 in Tianjin city, was simulated by using TRNSYS software. Daily or hourly extreme energy consumption was determined by percentile methods, and the climate impact on extreme energy consumption was analyzed. The results showed that days of extreme heating consumption showed apparent decrease during the recent 30 years for residential and large venue buildings, whereas days of extreme cooling consumption increased in large venue building. No significant variations were found for the days of extreme energy consumption for commercial building, although a decreasing trend in extreme heating energy consumption. Daily extreme energy consumption for large venue building had no relationship with climate parameters, whereas extreme energy consumption for commercial and residential buildings was related to various climate parameters. Further multiple regression analysis suggested heating energy consumption for commercial building was affected by maximum temperature, dry bulb temperature, solar radiation and minimum temperature, which together can explain 71.5 % of the variation of the daily extreme heating energy consumption. The daily extreme cooling energy consumption for commercial building was only related to the wet bulb temperature (R2= 0.382. The daily extreme heating energy consumption for residential building was affected by 4 climate parameters, but the dry bulb temperature had the main impact. The impacts of climate on hourly extreme heating energy consumption has a 1-3 hour delay in all three types of buildings, but no delay was found in the impacts of climate on hourly extreme cooling energy consumption for the selected buildings.

  16. Climate impacts on extreme energy consumption of different types of buildings.

    Science.gov (United States)

    Li, Mingcai; Shi, Jun; Guo, Jun; Cao, Jingfu; Niu, Jide; Xiong, Mingming

    2015-01-01

    Exploring changes of building energy consumption and its relationships with climate can provide basis for energy-saving and carbon emission reduction. Heating and cooling energy consumption of different types of buildings during 1981-2010 in Tianjin city, was simulated by using TRNSYS software. Daily or hourly extreme energy consumption was determined by percentile methods, and the climate impact on extreme energy consumption was analyzed. The results showed that days of extreme heating consumption showed apparent decrease during the recent 30 years for residential and large venue buildings, whereas days of extreme cooling consumption increased in large venue building. No significant variations were found for the days of extreme energy consumption for commercial building, although a decreasing trend in extreme heating energy consumption. Daily extreme energy consumption for large venue building had no relationship with climate parameters, whereas extreme energy consumption for commercial and residential buildings was related to various climate parameters. Further multiple regression analysis suggested heating energy consumption for commercial building was affected by maximum temperature, dry bulb temperature, solar radiation and minimum temperature, which together can explain 71.5 % of the variation of the daily extreme heating energy consumption. The daily extreme cooling energy consumption for commercial building was only related to the wet bulb temperature (R2= 0.382). The daily extreme heating energy consumption for residential building was affected by 4 climate parameters, but the dry bulb temperature had the main impact. The impacts of climate on hourly extreme heating energy consumption has a 1-3 hour delay in all three types of buildings, but no delay was found in the impacts of climate on hourly extreme cooling energy consumption for the selected buildings.

  17. Wavelet modulation: An alternative modulation with low energy consumption

    Science.gov (United States)

    Chafii, Marwa; Palicot, Jacques; Gribonval, Rémi

    2017-02-01

    This paper presents wavelet modulation, based on the discrete wavelet transform, as an alternative modulation with low energy consumption. The transmitted signal has low envelope variations, which induces a good efficiency for the power amplifier. Wavelet modulation is analyzed and compared for different wavelet families with orthogonal frequency division multiplexing (OFDM) in terms of peak-to-average power ratio (PAPR), power spectral density (PSD) properties, and the impact of the power amplifier on the spectral regrowth. The performance in terms of bit error rate and complexity of implementation are also evaluated, and several trade-offs are characterized. xml:lang="fr"

  18. Analyses on Energy Saving Potential Based on Large-scale Public Buildings Energy Consumption

    Directory of Open Access Journals (Sweden)

    Xuping Chen

    2012-08-01

    Full Text Available To analyze large-scale public buildings’ energy-saving potential is one of the methods to realize scientific energy control management and service. This method aims at a typical public building’s powerconsumed system. Through analyzing and comparing the consumption data, it succeeds in analyzing the use efficiency of building power, consumption level and economic effects of the energy utilization. More over, this method has a quantity analysis on the power-consumed unit’s building usage, so that it is able to find the unit’s energy-saving potential. Its bases of all analyses are building energy balance and analyzing theory of energy cost, analyzing theory of engineering economy and environment and rational distribution theory of energy utilization system.

  19. Energy Consumption, Trade and GDP: A Case Study of South Asian Countries

    OpenAIRE

    Shakeel, Muhammad; Iqbal, Mazhar; Majeed, Muhammad Tariq

    2013-01-01

    Using panel co-integration approach over the period 1980-2009 for South Asian economies, this study investigates the dynamic linkages between energy consumption, trade and GDP. The results show that, in the short run, feedback relationship holds between energy consumption and GDP and between energy consumption and exports. In the long run, the feedback relation holds between energy and GDP while unidirectional causality holds from export to energy. Thus, feedback hypothesis between energy and...

  20. Analysis of Energy Consumption and Energy Conservation Measures for RFCCU at Shengli Petrochemical Company

    Institute of Scientific and Technical Information of China (English)

    Li Ning; Xu Zhenling

    2006-01-01

    This article introduces a string of energy conservation measures adopted over the past several years by the RFCC unit at Shengli Petrochemical Complex, including the optimization of feedstock properties, the adoption of high-efficiency atomizing nozzles, the revamp of CO boiler, the atomization by means of dry gas, the post-burning of flue gas as well as the application of frequency converting machines and pumps, resulting in ideal effects. The energy consumption of the RFCC unit was gradually decreased to 2984.25 MJ/t from the original level of 3716.99 MJ/t. After comparing basic energy consumption values with actual consumption values, the authors have set forward measures for further energy conservation, such as the recovery of low-temperature excess heat contained in oil/gas streams exiting from the fractionation tower top, addition of the fourth cyclone, delivery of hot oil slurry, and heat tracing with hot water.