WorldWideScience

Sample records for recycling center hopes

  1. Alternative Fuels Data Center: Yellowstone Park Recycles Vehicle Batteries

    Science.gov (United States)

    for Solar Power Yellowstone Park Recycles Vehicle Batteries for Solar Power to someone by E -mail Share Alternative Fuels Data Center: Yellowstone Park Recycles Vehicle Batteries for Solar Power on Facebook Tweet about Alternative Fuels Data Center: Yellowstone Park Recycles Vehicle Batteries

  2. Alternative Fuels Data Center: Recycled Cooking Oil Powers Biodiesel

    Science.gov (United States)

    Vehicles in Vermont Recycled Cooking Oil Powers Biodiesel Vehicles in Vermont to someone by E -mail Share Alternative Fuels Data Center: Recycled Cooking Oil Powers Biodiesel Vehicles in Vermont on Facebook Tweet about Alternative Fuels Data Center: Recycled Cooking Oil Powers Biodiesel Vehicles in

  3. Centralized consolidation/recycling center

    International Nuclear Information System (INIS)

    St. Georges, L.T.; Poor, A.D.

    1995-05-01

    There are approximately 175 separate locations on the Hanford Site where dangerous waste is accumulated in hundreds of containers according to compatibility. Materials that are designated as waste could be kept from entering the waste stream by establishing collection points for these materials and wastes and then transporting them to a centralized consolidation/recycling center (hereinafter referred to as the consolidation center). Once there the materials would be prepared for offsite recycling. This document discusses the removal of batteries, partially full aerosol cans, and DOP light ballasts from the traditional waste management approach, which eliminates 89 satellite accumulation areas from the Hanford Site (43 for batteries, 33 for aerosols, and 13 for DOP ballasts). Eliminating these 89 satellite accumulation areas would reduce by hundreds the total number of containers shipped offsite as hazardous waste (due to the increase in containers when the wastes that are accumulated are segregated according to compatibility for final shipment). This new approach is in line with the U.S. Environmental Protection Agency's (EPA) draft Universal Waste Rules for these open-quotes nuisanceclose quotes and common waste streams. Additionally, future reviews of other types of wastes that can be handled in this less restrictive and more cost-effective manner will occur as part of daily operations at the consolidation center. The Hanford Site has been identified as a laboratory for reinventing government by the Secretary of the U.S. Department of Energy (DOE), Hazel O'Leary, and as a demonstration zone where open-quotes innovative ideas, processes and technologies can be created, tested and demonstrated.close quotes Additionally, DOE, EPA, and the Washington State Department of Ecology (Ecology) have agreed to cut Hanford cleanup costs by $1 billion over a 5-year period

  4. Recycling: Establishing a Citizen-Sponsored Reclamation Center.

    Science.gov (United States)

    Keep America Beautiful, Inc., New York, NY.

    This booklet applies the Clean Community System (CCS) of Keep America Beautiful, Inc. to the development of citizen-sponsored recycling projects. Six initial steps in establishing a reclamation center are given and include information gathering, market analysis, legal requirements, and site location. Suggestions are included for recruiting staff…

  5. U.S. Department of Energy National Center of Excellence for Metals Recycle

    International Nuclear Information System (INIS)

    Adams, V.; Bennett, M.; Bishop, L.

    1998-06-01

    The US Department of Energy (DOE) National Center of Excellence for Metals Recycle has recently been established. The vision of this new program is to develop a DOE culture that promotes pollution prevention by considering the recycle and reuse of metal as the first and primary disposition option and burial as a last option. The Center of Excellence takes the approach that unrestricted release of metal is the first priority because it is the most cost-effective disposition pathway. Where this is not appropriate, restricted release, beneficial reuse, and stockpile of ingots are considered. The Center has gotten off to a fast start. Current recycling activities include the sale of 40,000 tons of scrap metal from the East Tennessee Technology Park (formerly K-25 Plant) K-770 scrap yard, K-1064 surplus equipment and machinery, 7,000 PCB-contaminated drums, 12,000 tons of metal from the Y-12 scrap yard, and 1,000 metal pallets. In addition, the Center of Excellence is developing a toolbox for project teams that will contain a number of specific tools to facilitate metals recycle. This Internet-based toolbox will include primers, computer software, and case studies designed to help sites to perform life cycle analysis, perform ALARA (As Low As is Reasonably Achievable) analysis for radiation exposures, produce pollution prevention information and documentation, manage their materials inventory, produce independent government estimates, and implement sale/service contracts. The use of these tools is described for two current activities: disposition of scrap metal in the Y-12 scrap yard, and disposition of PCB-contaminated drums. Members of the Center look forward to working with all DOE sites, regulatory authorities, the private sector, and other stakeholders to achieve the metals recycle goals

  6. Unconventional recycling

    Energy Technology Data Exchange (ETDEWEB)

    White, K.M.

    1996-05-01

    Despite advances made in recycling technology and markets for materials over the past few years, recycling at convention centers, particularly on the show floor itself, can be a vexing problem. Part of the problem lies in the fact that recycling at convention centers has more to do with logistics than it does with these industry trends. However, given the varied nature of convention centers, and the shows they book, a rigid approach to recycling at convention centers is not always feasible. Like the numerous different curbside programs serving communities across the country, what works for one convention center--and one show--many not work for another. These difficulties notwithstanding, more convention centers are offering recycling programs today, and more groups booking conventions these days have begun requesting recycling services.

  7. Recycling of solid wastes at kindergartens centers

    Directory of Open Access Journals (Sweden)

    Mohamed R.M.S.R.

    2017-02-01

    Full Text Available The present study aimed to conduct an activity on environmental awareness campaign at a kindergarten center, with the children age 4-6 years old. The activity included identify the various types of waste generated at the kindergarten and to realize the conservation practice by participating in simple waste management strategies and an explanation about recycling, reusing and reducing waste (3R. The activity provided the children more awareness about the importance of minimizing the plastic wastes. The activity had created an interesting experience to the young generation through practice activity and has given a light on the nature conservation along their growing years. It can be concluded that the awareness of environmental issues among children have risen up as noted by looking at students physical expression. Children have understood the potential to conserve nature from a simple action which is recycling. After the activity, children’s were able to identify and divide the rubbish.

  8. U.S. Department of Energy National Center of Excellence for Metals Recycle

    International Nuclear Information System (INIS)

    Adams, V.; Bennett, M.; Bishop, L.

    1998-05-01

    The US Department of Energy (DOE) National Center of Excellence for Metals Recycle has recently been established. The vision of this new program is to develop a DOE culture that promotes pollution prevention by considering the recycle and reuse of metal as the first and primary disposition option and burial as a last option. The Center of Excellence takes the approach that unrestricted release of metal is the first priority because it is the most cost-effective disposition pathway. Where this is not appropriate, restricted release, beneficial reuse, and stockpile of ingots are considered. Current recycling activities include the sale of 40,000 tons of scrap metal from the East Tennessee Technology Park (formerly K-25 Plant) K-770 scrap yard, K-1064 surplus equipment and machinery, 7,000 PCB-contaminated drums, 12,000 tons of metal from the Y-l2 scrap yard, and 1,000 metal pallets. In addition, the Center of Excellence is developing a toolbox for project teams that will contain a number of specific tools to facilitate metals recycle. This Internet-based toolbox will include primers, computer programs, and case studies designed to help sites to perform life cycle analysis, perform ALARA (As Low As is Reasonably Achievable) analysis for radiation exposures, provide pollution prevention information and documentation, and produce independent government estimates. The use of these tools is described for two current activities: disposition of scrap metal in the Y-12 scrapyard, and disposition of PCB-contaminated drums

  9. Nuclear Fuel Recovery and Recycling Center. License application, PSAR, volume 3

    International Nuclear Information System (INIS)

    1976-01-01

    Volume 3 comprises Chapter 5 which provides descriptive information on Nuclear Fuel Recovery and Recycling Center buildings and other facilities, including their locations. The design features discussed include those used to withstand environmental and accidental forces and to insure radiological protection

  10. Nuclear Fuel Recovery and Recycling Center. License application, PSAR, volume 1

    International Nuclear Information System (INIS)

    1976-01-01

    A summary of the location and major design features of the proposed Nuclear Fuel Recovery and Recycling Center is presented. The safety aspects of the proposed facilities and operations are summarized, taking into account possible normal and abnormal operating and environmental conditions. A chapter on site characteristics is included

  11. Recycling production designs: the value of coordination and flexibility in aluminum recycling operations

    Science.gov (United States)

    Brommer, Tracey H.

    The growing motivation for aluminum recycling has prompted interest in recycling alternative and more challenging secondary materials. The nature of these alternative secondary materials necessitates the development of an intermediate recycling facility that can reprocess the secondary materials into a liquid product Two downstream aluminum remelters will incorporate the liquid products into their aluminum alloy production schedules. Energy and environmental benefits result from delivering the products as liquid but coordination challenges persist because of the energy cost to maintain the liquid. Further coordination challenges result from the necessity to establish a long term recycling production plan in the presence of long term downstream aluminum remelter production uncertainty and inherent variation in the daily order schedule of the downstream aluminum remelters. In this context a fundamental question arises, considering the metallurgical complexities of dross reprocessing, what is the value of operating a coordinated set of by-product reprocessing plants and remelting cast houses? A methodology is presented to calculate the optimal recycling center production parameters including 1) the number of recycled products, 2) the volume of recycled products, 3) allocation of recycled materials across recycled products, 4) allocation of recycled products across finished alloys, 4) the level of flexibility for the recycling center to operate. The methods implemented include, 1) an optimization model to describe the long term operations of the recycling center, 2) an uncertainty simulation tool, 3) a simulation optimization method, 4) a dynamic simulation tool with four embedded daily production optimization models of varying degrees of flexibility. This methodology is used to quantify the performance of several recycling center production designs of varying levels of coordination and flexibility. This analysis allowed the identification of the optimal recycling

  12. Green Science: Revisiting Recycling

    Science.gov (United States)

    Palliser, Janna

    2011-01-01

    Recycling has been around for a long time--people have reused materials and refashioned them into needed items for thousands of years. More recently, war efforts encouraged conservation and reuse of materials, and in the 1970s recycling got its official start when recycling centers were created. Now, curbside recycling programs and recycling…

  13. Hope, Life, and Death: A Qualitative Analysis of Dying Cancer Patients' Talk about Hope

    Science.gov (United States)

    Eliott, Jaklin A.; Olver, Ian N.

    2009-01-01

    Although deemed vital to patient well-being, hope in persons who are terminally ill is often thought to be problematic, particularly when centered on cure. As part of a study on end-of-life decision-making, we asked 28 patients with cancer, believed to be within weeks of their death, to talk about hope. Responses were transcribed and discursively…

  14. Need for Asian regional spent fuel recycle center (ARRC)

    International Nuclear Information System (INIS)

    Yamamura, Osamu

    2009-01-01

    Energy demand is increasing rapidly in the Asia-Pacific region. From the viewpoint of preventing global warming, countries in the region are expected to introduce more nuclear power plants (NPPs) which do not emit greenhouse gases (GHGs). At the end of this century, the capacity for NPPs is estimated to reach around 1600 GWe and around 300,000 tons of uranium (TU) as spent fuel will be accumulated. The spent fuel from the NPPs should be reprocessed and fabricated into MOX fuel to decrease the amounts of radioactive wastes and future fuel recycling should be supported in the Asian Regional Spent Fuel Recycle Center (ARRC) under international regulation. The ARRC will include a reprocessing plant, an MOX fuel fabrication plant, a high-activity vitrified solid waste storage facility, and sea discharge pipes for extremely low activity liquid wastes etc. Furthermore, the ARRC should be operated as a component in an international organization scheme, an ASIATOM and it should accept the full scope of IAEA safeguards to verify the nonproliferation of nuclear materials. When the ARRC is designed, knowledge obtained through experiences in the Tokai and the Rokkasho reprocessing plants in Japan, which is a non-nuclear weapons country, will be used. (author)

  15. Tire Recycling

    Science.gov (United States)

    1997-01-01

    Cryopolymers, Inc. tapped NASA expertise to improve a process for recycling vehicle tires by converting shredded rubber into products that can be used in asphalt road beds, new tires, hoses, and other products. In conjunction with the Southern Technology Applications Center and Stennis Space Center, NASA expertise in cryogenic fuel-handling needed for launch vehicle and spacecraft operations was called upon to improve the recycling concept. Stennis advised Cryopolymers on the type of equipment required, as well as steps to reduce the amount of liquid nitrogen used in the process. They also guided the company to use more efficient ways to control system hardware. It is estimated that more than 300 million tires nationwide are produced per year. Cryopolymers expects to reach a production rate of 5,000 tires recycled per day.

  16. Recycling Behavior: A Multidimensional Approach

    Science.gov (United States)

    Meneses, Gonzalo Diaz; Palacio, Asuncion Beerli

    2005-01-01

    This work centers on the study of consumer recycling roles to examine the sociodemographic and psychographic profile of the distribution of recycling tasks and roles within the household. With this aim in mind, an empirical work was carried out, the results of which suggest that recycling behavior is multidimensional and comprises the undertaking…

  17. Dreams, Hopes, Realities: NASA's Goddard Space Flight Center, the First Forty Years

    Science.gov (United States)

    Wallace, Lane E.

    1999-01-01

    Throughout history, the great achievements of civilizations and cultures have been recorded in lists of dates and events. But to look only at the machinery, discoveries, or milestones is to miss the value of these achievements. Each goal achieved or discovery or made represents a supreme effort on the part of individual people who came and worked together for a purpose greater than themselves. Driven by an innate curiosity of the spirit, we have built civilizations and discovered new worlds, always reaching out beyond what we knew or thought was possible. These efforts may have used ships or machinery, but the achievement was that of the humans who made those machines possible- remarkable people willing to endure discomfort, frustration, fatigue, and the risk of failure in the hope of finding out something new. This is the case with the history of the Goddard Space Flight Center. This publication traces the legacy of successes, risks, disappointments and internationally recognized triumphs of the Center's first 40 years. It is a story of technological achievement and scientific discovery; of reaching back to the dawn of time and opening up a new set of eyes on our own planet Earth. In the end, it is not a story about machinery or discoveries, but a story about ourselves. If we were able to step off our planet, and if we continue to discover new mysteries and better technology, it is because the people who work at Goddard always had a passion for exploration and the dedication to make it happen. The text that follows is a testimony to the challenges people at the Goddard Space Flight Center have faced and overcome over almost half a century. Today, we stand on the threshold of a new and equally challenging era. It will once again test our ingenuity, skills, and flexibility as we find new ways of working with our colleagues in industry, government, and academia. Doing more with less is every bit as ambitious as designing the first science instrument to study the

  18. What Happens at the House of Hope | NIH MedlinePlus the Magazine

    Science.gov (United States)

    ... of Hope Follow us What Happens at the House of Hope? Discovery documentary showcases important research at ... at the Clinical Center also known as the “House of Hope.” Two of the patients have cancer ...

  19. The tenacity and tenuousness of hope: parental experiences of hope when their child has a poor cancer prognosis.

    Science.gov (United States)

    Barrera, Maru; Granek, Leeat; Shaheed, Jenny; Nicholas, David; Beaune, Laura; D'Agostino, Norma M; Bouffet, Eric; Antle, Beverly

    2013-01-01

    The meaning and role of hope in parents of children with life-threatening illnesses remain relatively unstudied. The objectives of this study were to explore parental hope when a child is being treated for a malignancy resistant to treatment and to identify facilitators and barriers to maintaining hope in this context. Thirty-five parents of children with difficult-to-treat cancer were interviewed 3 months after diagnosis. Line-by-line coding of transcripts was used to establish categories and themes. Constant comparison was used to examine relationships within and across codes and categories. Parental hope was related to the child's cure and future. The concept, however, oscillated between being tenacious and robust, and tenuous and elusive, depending on how the child was responding to treatment and the psychosocial context. Focusing on positive outcomes and experiences, spirituality, and social support facilitated being hopeful. Awareness of negative outcomes, information overload, physical and emotional depletion, and fear and uncertainty challenged parental hope. Developing a model that identifies the nature of parental hope as well as barriers and facilitators to maintaining hope shortly after childhood cancer diagnosis may assist healthcare professionals in supporting parents. Understanding parental hope may assist healthcare professionals to avoid overloading parents with too much information at once. Healthcare professionals can also ensure that social support from family, community, and the medical center is available for parents and that their physical and emotional needs are being met to ensure that they maintain hope to best care for their child with cancer.

  20. Management options for recycling radioactive scrap metals

    Energy Technology Data Exchange (ETDEWEB)

    Dehmel, J.C.; MacKinney, J.; Bartlett, J.

    1997-02-01

    The feasibility and advantages of recycling radioactive scrap metals (RSM) have yet to be assessed, given the unique technical, regulatory, safety, and cost-benefit issues that have already been raised by a concerned recycling industry. As is known, this industry has been repeatedly involved with the accidental recycling of radioactive sources and, in some cases, with costly consequences. If recycling were deemed to be a viable option, it might have to be implemented with regulatory monitoring and controls. Its implementation may have to consider various and complex issues and address the requirements and concerns of distinctly different industries. There are three basic options for the recycling of such scraps. They are: (1) recycling through the existing network of metal-scrap dealers and brokers, (2) recycling directly and only with specific steelmills, or (3) recycling through regional processing centers. Under the first option, scrap dealers and brokers would receive material from RSM generators and determine at which steelmills such scraps would be recycled. For the second option, RSM generators would deal directly with selected steelmills under specific agreements. For the third option, generators would ship scraps only to regional centers for processing and shipment to participating steelmills. This paper addresses the potential advantages of each option, identifies the types of arrangements that would need to be secured among all parties, and attempts to assess the receptivity of the recycling industry to each option.

  1. Recycling and management of waste lead-acid batteries: A mini-review.

    Science.gov (United States)

    Li, Malan; Liu, Junsheng; Han, Wei

    2016-04-01

    As a result of the wide application of lead-acid batteries to be the power supplies for vehicles, their demand has rapidly increased owing to their low cost and high availability. Accordingly, the amount of waste lead-acid batteries has increased to new levels; therefore, the pollution caused by the waste lead-acid batteries has also significantly increased. Because lead is toxic to the environment and to humans, recycling and management of waste lead-acid batteries has become a significant challenge and is capturing much public attention. Various innovations have been recently proposed to recycle lead and lead-containing compounds from waste lead-acid batteries. In this mini-review article, different recycling techniques for waste lead-acid batteries are highlighted. The present state of such recycling and its future perspectives are also discussed. We hope that this mini-review can provide useful information on recovery and recycling of lead from waste lead-acid batteries in the field of solid waste treatment. © The Author(s) 2016.

  2. The nature of hope among Iranian cancer patients.

    Science.gov (United States)

    Afrooz, Rashed; Rahmani, Azad; Zamanzadeh, Vahid; Abdullahzadeh, Farahnaz; Azadi, Arman; Faghany, Safieh; Pirzadeh, Asgar

    2014-01-01

    Hope is an important coping resource for cancer patients. Types and sources of hope and hope- inspiring strategies are not well investigated among Iranian cancer patients. The aims of present study were therefore to investigate the nature of hope and some demographic predictors of hope among Iranian cancer patients. This descriptive-correlational study was undertaken among 200 cancer patients admitted to an educational center affiliated to Ardabil University of Medical Sciences, Iran. Participants were selected using a convenience sampling method. The Herth Hope Index and other validated questionnaires were used to investigate level of hope and types and sources of hope, as well as hope-inspiring strategies. Data were analyzed using SPSS statistical software. The overall score for hope was 31 from total scores ranging between 12 and 48. Some 94% of patients mentioned 'return to normal life' and 'complete healing of disease by drugs and physicians' as their main hopes. The most important sources of hope reported by patients include spiritual resources, family members, healthcare workers, and medicines and treatments available for the disease. Relationship with God, praying/blessing, controlling the signs and symptoms of the disease, and family/health care workers' support were the main hope-inspiring strategies. Patients who had a history of metastasis, or who were older, illiterate, divorced/widowed and lived with their children reported lower levels of hope. On the other hand, employed patients and those with good support from their families had higher levels of hope. The study findings showed moderate to high levels of hope among Iranian cancer patients. Accordingly, the role of spiritual/religion, family members and health care workers should be considered in developing care plans for these patients.

  3. Hope

    NARCIS (Netherlands)

    Blöser, Claudia; Stahl, Titus; Zalta, Edward

    2017-01-01

    Discussions of hope can be found throughout the history of philosophy and across all Western philosophical traditions, even though philosophy has traditionally not paid the same attention to hope as it has to attitudes like belief and desire. However, even though hope has historically only rarely

  4. PET and Recycling

    Directory of Open Access Journals (Sweden)

    Funda Sevencan

    2007-08-01

    Full Text Available This review aims to clarify the need of decreasing the environmental effects caused by human and draw attention to the increasing environmental effects of plastics wastes. Plastics consist of organic molecules with high density molecules or polymers. Main resources of plastics are the residue of oil rafineries. Several advantages of plastics, have increased the usage continuously. Polyethylene Terephthalate (PET is the most commonly used plastics. PET is used to protect food, drinking water, fruit juice, alcoholic beverage, and food packing films. By the increasing interest on the environmental effects of plastic wastes, concerns on the recyclable packing materials also grew up. Also the daily use of recyclable containers consisting PET have increased. There are five steps for recycling of plastics. These steps are; using large amounts of plastics, collecting them in a big center, classifying and sorting the plastics, reproducing the polymers and obtaining new products with melted plastics. Providing a healthy recycling of plastics, the consumers should have knowledge and responsibility. The consumer should know what he/she has to do before putting the plastics in the recycling containers. Recycling containers and bags should be placed near the sources of plastic wastes. Consequently, the plastic wastes and environmental problems they cause will be on the agenda in future. [TAF Prev Med Bull. 2007; 6(4: 307-312

  5. PET and Recycling

    Directory of Open Access Journals (Sweden)

    Funda Sevencan

    2007-08-01

    Full Text Available This review aims to clarify the need of decreasing the environmental effects caused by human and draw attention to the increasing environmental effects of plastics wastes. Plastics consist of organic molecules with high density molecules or polymers. Main resources of plastics are the residue of oil rafineries. Several advantages of plastics, have increased the usage continuously. Polyethylene Terephthalate (PET is the most commonly used plastics. PET is used to protect food, drinking water, fruit juice, alcoholic beverage, and food packing films. By the increasing interest on the environmental effects of plastic wastes, concerns on the recyclable packing materials also grew up. Also the daily use of recyclable containers consisting PET have increased. There are five steps for recycling of plastics. These steps are; using large amounts of plastics, collecting them in a big center, classifying and sorting the plastics, reproducing the polymers and obtaining new products with melted plastics. Providing a healthy recycling of plastics, the consumers should have knowledge and responsibility. The consumer should know what he/she has to do before putting the plastics in the recycling containers. Recycling containers and bags should be placed near the sources of plastic wastes. Consequently, the plastic wastes and environmental problems they cause will be on the agenda in future. [TAF Prev Med Bull 2007; 6(4.000: 307-312

  6. The content of hope in ambulatory patients with colon cancer.

    Science.gov (United States)

    Beckman, Emily S; Helft, Paul R; Torke, Alexia M

    2013-01-01

    Although hope is a pervasive concept in cancer treatment, we know little about how ambulatory patients with cancer define or experience hope. We explored hope through semistructured interviews with ten patients with advanced (some curable, some incurable) colon cancer at one Midwestern, university-based cancer center. We conducted a thematic analysis to identify key concepts related to patient perceptions of hope. Although we did ask specifically about hope, patients also often revealed their hopes in response to indirect questions or by telling stories about their cancer experience. We identified four major themes related to hope: 1) hope is essential, 2) a change in perspective, 3) the content of hope, and 4) communicating about hope. The third theme, the content of hope, included three subthemes: a) the desire for normalcy, b) future plans, and c) hope for a cure. We conclude that hope is an essential concept for patients undergoing treatment for cancer as it pertains to their psychological well-being and quality of life, and hope for a cure is not and should not be the only consideration. In a clinical context, the exploration of patients' hopes and aspirations in light of their cancer diagnosis is important because it provides a frame for understanding their goals for treatment. Exploration of the content of patients' hope can not only help to illuminate misunderstandings but also clarify how potential treatments may or may not contribute to achieving patients' goals.

  7. Valuing hope.

    Science.gov (United States)

    McMillan, John; Walker, Simon; Hope, Tony

    2014-01-01

    This article argues that hope is of value in clinical ethics and that it can be important for clinicians to be sensitive to both the risks of false hope and the importance of retaining hope. However, this sensitivity requires an understanding of the complexity of hope and how it bears on different aspects of a well-functioning doctor-patient relationship. We discuss hopefulness and distinguish it, from three different kinds of hope, or 'hopes for', and then relate these distinctions back to differing accounts of autonomy. This analysis matters because it shows how an overly narrow view of the ethical obligations of a clinician to their patient, and autonomy, might lead to scenarios where patients regret the choices they make.

  8. Development and preliminary testing of the Schizophrenia Hope Scale, a brief scale to measure hope in people with schizophrenia.

    Science.gov (United States)

    Choe, Kwisoon

    2014-06-01

    Hope has received attention as a central component of recovery from mental illness; however, most instruments measuring hope were developed outside the mental health field. To measure the effects of mental health programs on hope in people with schizophrenia, a specialized scale is needed. This study examined the psychometric properties of the newly developed 9-item Schizophrenia Hope Scale (SHS-9) designed to measure hope in individuals with schizophrenia. A descriptive survey design. Participants were recruited from three psychiatric hospitals and two community mental health centers in South Korea. A total of 347 individuals over age 18 with a DSM-IV diagnosis of schizophrenia, schizoaffective, or schizophrenia spectrum disorders (competent to provide written informed consent) participated in this study; 149 (94 men, 55 women) completed a preliminary scale consisting of 40 revised items, and 198 (110 men, 88 women) completed the second scale of 17 items. Scale items were first selected from extensive literature reviews and a qualitative study on hope in people with schizophrenia; the validity and reliability of a preliminary scale was then evaluated by an expert panel and exploratory factor analysis. The remaining 9 items forming the Schizophrenia Hope Scale (SHS-9) were evaluated through confirmatory factor analysis. The SHS-9 demonstrates promising psychometric integrity. The internal consistency alpha coefficient was 0.92 with a score range of 0-18 and a mean total score of 12.06 (SD=4.96), with higher scores indicating higher levels of hope. Convergent validity was established by correlating the SHS-9 to the State-Trait Hope Inventory, r=0.61 (phope accounting for 61.77% of the total item variance. As hope has been shown to facilitate recovery from mental illness, the accurate assessment of hope provided by the short, easy-to-use Schizophrenia Hope Scale (SHS-9) may aid clinicians in improving the quality of life of individuals with schizophrenia. Copyright

  9. Hope against hope: exploring the hopes and challenges of rural female caregivers of persons with advanced cancer

    Science.gov (United States)

    2013-01-01

    Background This paper focuses on the qualitative component of a study evaluating a hope intervention, entitled Living with Hope Program (LWHP), designed to foster hope in female caregivers of family members living with advanced cancer. The purpose of this research is to share, in the form of a story, the experiences of rural female caregivers caring for family members with advanced cancer, focusing on what fosters their hope. Hope is a psychosocial and spiritual resource that has been found to help family caregivers live through difficult transitions and challenges. Methods Twenty-three participants from rural Western Canada completed daily journal entries documenting their hopes and challenges. Cortazzi’s (2001) method of narrative analysis was used to analyze the data, which was then transcribed into a narrative entitled ‘hope against hope.’ Results The journal entries highlighted: the caregivers’ hopes and what fostered their hope; the various challenges of caregiving; self-care strategies, and; their emotional journey. Hope was integrated throughout their entire experience, and ‘hope against hope’ describes how hope persists even when there is no hope for a cure. Conclusions This research contributes to the assessment of caregiver interventions that impact hope and quality of life, while illustrating the value of a narrative approach to both research and practice. Journaling may be particularly valuable for rural caregivers who are isolated, and may lack direct professional and peer support. There is an opportunity for health professionals and other providers to foster a relationship of trust with family caregivers, in which their story can be told openly and where practitioners pay closer attention to the psychosocial needs of caregivers. PMID:24341372

  10. Beyond breaking bad news: the roles of hope and hopefulness.

    Science.gov (United States)

    Whitney, Simon N; McCullough, Laurence B; Frugé, Ernest; McGuire, Amy L; Volk, Robert J

    2008-07-15

    Hope is important to patients, yet physicians are sometimes unsure how to promote hope in the face of life-threatening illness. Hope in medicine is of two kinds: specific (hope for specific outcomes) and generalized (a nonspecific sense of hopefulness). At the time of diagnosis of a life-ending condition, the specific goal of a long life is dashed, and there may be no medically plausible specific outcome that the patient feels is worth wishing for. Yet the physician may nonetheless maintain an open-ended hopefulness that is compatible with the physician's obligation to be truthful; this hopefulness can help sustain patient and family through the turbulent period of adaptation to the unwelcome reality of major illness. As this adaptation evolves, the physician can help patients and families adapt to suffering and loss of control by selecting and achieving specific goals such as improvement of the patient's environment in hospital or hospice, pain control, and relief of sleeplessness. Thus hope for specific (but far more modest) future events can again become a positive part of the patient s emotional landscape. The authors do not propose that physicians remain upbeat no matter the circumstance, for they must respect the constraints of reality and the patients' mortality. However, physicians can provide both cognitive and affective support as patients learn how to adapt. Hope and hopefulness are both important in this process. Hope is always important to patients. Physicians can and should promote hopefulness without endorsing unrealistic hope. (c) 2008 American Cancer Society.

  11. Scientists forging hope for peace

    CERN Multimedia

    Chui, G

    2004-01-01

    "As hopes for peace flare and fade in the Middle East, traditional enemies are working to build the region's first major center for cutting-edge research.....The project, called SESAME, is under construction in Jordan, which has donated a site and about $8 million in construction funding. The Palestinian Authority and nine countries, including Egypt, Iran, Israel and Pakistan, have signed on as members" (1 page).

  12. Ideas and Activities for Recycling Education for Grades K-12.

    Science.gov (United States)

    Ayers, Jerry B., Ed.; Olberding, April H., Ed.

    In June 1997, Tennessee Technological University's Center for Manufacturing Research conducted a one-week program on plastics recycling for science teachers. The purpose of the program was to increase the teachers' basic knowledge about the importance of recycling plastics and to better prepare the teachers for teaching recycling in the classroom.…

  13. The Efficiency of Informality: Quantifying Greenhouse Gas Reductions from Informal Recycling in Bogotá, Colombia

    DEFF Research Database (Denmark)

    Vergara, Sintana E.; Damgaard, Anders; Gomez, Daniel

    2016-01-01

    The dual challenges of increasing urbanization and consumption are centered in cities in the Global South, where growing waste production threatens public and environmental health. Reuse and recycling are widely recognized to provide broad environmental benefits. Although most industrialized cities...... replaced their informal recycling sectors with municipally run recycling schemes and have had to build their recycling rates anew, most industrializing cities in the Global South remain centers of recycling and reuse through the work of informal workers. Bogotá, Colombia, is emblematic of many cities...

  14. The Recycling Solution: How I Increased Recycling on Dilworth Road

    Science.gov (United States)

    Keller, J. Jacob

    2010-01-01

    The grandson of Fred Keller, one of the founders of behavior analysis, Jacob was 10 years old when he conducted the project for his elementary school science fair. We recently contacted Jacob to learn more about his project. He told us the inspiration came from a class field trip to the county recycling center, which included seeing video footage…

  15. Hope in palliative care: from narcissism to self-transcendence in amyotrophic lateral sclerosis.

    Science.gov (United States)

    Fanos, Joanna H; Gelinas, Deborah F; Foster, Reed S; Postone, Norman; Miller, Robert G

    2008-04-01

    The concept of hope in palliative care is an important and neglected area of research. Amyotrophic lateral sclerosis (ALS), a progressive degenerative motor neuron disease, offers an excellent opportunity to study this construct as the illness is virtually always fatal. Our research explored the meaning of hope in individuals with ALS. Sixteen patients (13 males and 3 females; mean age, 54) were interviewed during routine clinic visits to the Forbes Norris MDA/ALS Research Center at California Pacific Medical Center, San Francisco. The Forced Vital Capacity (FVC) Scale and the ALS Functional Rating Scale-Revised (ALSFRS-R) and a Hope Scale were administered. Themes of hope were identified and categorized. Hope categories included: (1) hope for a cure, (2) social support, (3) search for information, (4) spiritual beliefs, (5) limiting the impact, (6) adapting to changing capacities, (7) living in the moment, and (8) self-transcendence. The relationship between hope and the FVC value and individual as well as overall ALSFRS-R ratings were examined, and none were significant. Individuals varied in their capacity to cope with their illness unrelated to their physical ability. Themes ranged from a primary focus on the self to one of heightened concern for others, on continuum from narcissism to altruism. Respondents cited using a number of categories of hope (mean=5). Patients draw upon a variety of mechanisms to sustain hope when facing chronic disease, including hope for a cure, support from others, seeking information, spiritual beliefs, limiting the impact, adapting to changing capacities, living in the moment, and transcending the self. The palliative care team can play an important role by promoting discussions regarding hopefulness and its many forms in individuals with ALS.

  16. Toward a theory of persuasive hope: effects of cognitive appraisals, hope appeals, and hope in the context of climate change.

    Science.gov (United States)

    Chadwick, Amy E

    2015-01-01

    Hope has the potential to be a powerful motivator for influencing behavior. However, hope and messages that evoke hope (hope appeals) have rarely been the focus of theoretical development or empirical research. As a step toward the effective development and use of hope appeals in persuasive communication, this study conceptualized and operationalized hope appeals in the context of climate change prevention. Then, the study manipulated components of the hope evocation part of a hope appeal. Specifically, the components were designed to address appraisals of the importance, goal congruence, future expectation, and possibility of climate protection, resulting in a 2 (strong/weak importance) × 2 (strong/weak goal congruence) × 2 (strong/weak future expectation) × 2 (strong/weak possibility) between-subjects pretest-posttest factorial design. Two hundred forty-five undergraduate students were randomly assigned to one of the 16 message conditions and completed the study online. The study tested whether the four appraisals predict feelings of hope. It determined whether message components that address importance, goal congruence, future expectation, and possibility affect appraisals, feelings of hope, and persuasion outcomes. Finally, this study tested the effects of feelings of hope on persuasion outcomes. This study takes an important step toward enabling the effective use of hope appeals in persuasive communication.

  17. Hope as fantasy

    DEFF Research Database (Denmark)

    Winther-Lindqvist, Ditte Alexandra

    2017-01-01

    , for a miracle to occur, for more time, or in some cases hoping for death to come sooner than later. I recognize hope as a form of imaginative activity and practice, because hope is formed in light of an uncertain future, and rests upon imagined scenarios of what could be. Hope, like imagination, remembering...

  18. New recycling center hopes to change attitudes in Estonia / Alec Charles

    Index Scriptorium Estoniae

    Charles, Alec

    2004-01-01

    Caritas, Eestimaa Looduse Fond ja Heateo Sihtasutus on asutanud MTÜ Taaskasutus. Esimene taaskasutuskeskus loodi Tallinnas Paide tänavas, kuhu kogutakse majapidamises üleliigseks osutunud asju ning müüakse neid soodsa hinnaga edasi. Tulust plaanitakse luua riskinoorte tööõppeklasse ja töökodasid

  19. A Guide to Running a Recycling Project, Second Edition.

    Science.gov (United States)

    Oregon Recycling Information and Organizing Network, Portland.

    Today's increasing awareness of shortages has prompted people to reevaluate their consumption patterns of natural resources. In a time when there is no "away" location to throw wastes, many recycling centers have been organized. This guide contains information needed to organize and operate a recycling project. Suggestions for collection sites,…

  20. Hope dies last: two aspects of hope in contemporary Moscow

    NARCIS (Netherlands)

    Zigon, J.

    2009-01-01

    The concept of hope has, for the most part, been neglected by anthropologists. Recently, however, hope has been analyzed by two prominent anthropologists who view it either as a passive attitude or a future-oriented stance toward a good. My research in Moscow, Russia, suggests that hope is not so

  1. Strengthening education in human values - The Link between Recycling and Climate Change

    Science.gov (United States)

    Kastanidou, Sofia

    2014-05-01

    This work is an environmental education program of 50 hours- off curriculum, currently run by High school of Nikaia - Larissas. I as coordinator teacher, another two teachers and 24 students participate in this program. Intended learning outcomes: students will be able to define the importance of climate change, to evaluate the effect of human activities on climate, and to recognize the role of recycling in preventing global climate change. It is an environmental program with social goals. That means students have to understand the link between human and environment and learn how to combine environmental protection with human help. As a consequence collaboration has already begun between High school of Nikaia and the Paraplegic & Physically Disabled Association of Pella-Greece. This is a nonprofit association that collects plastic caps; with the contribution of a recycling company the Paraplegic Association converts plastic caps in wheelchairs and gives them to needy families. So, recycling caps becomes a meaningful form of environmental and social activism. Students are educated about the meaning of recycling and encouraged to collect all types of plastic caps; they are also educated in the meaning of helping people. Further, this environmental education program consists of two parts, a theoretical and a practical one: a) Theoretical part: education is an essential element of the global response to climate change, so students have to research on climate change; they visit the Center for Environmental Education in Florina and experience the aquatic ecosystem of Prespa lakes; specialists of the Centre inform students about the effects of climate change on wetlands; students have further to research how recycling can help fight global climate change as well as examine how recycling a key component of modern waste reduction is, as the third component of the "Reduce, Reuse, Recycle" waste hierarchy; they discover the interdependence of society, economy and the natural

  2. Recycle operations as a methodology for radioactive waste volume reduction

    International Nuclear Information System (INIS)

    Rasmussen, G.A.

    1985-01-01

    The costs for packaging, transportation and burial of low-level radioactive metallic waste have become so expensive that an alternate method of decontamination for volume reduction prior to disposal can now be justified. The operation of a large-scale centralized recycle center for decontamination of selected low level radioactive waste has been proven to be an effective method for waste volume reduction and for retrieving valuable materials for unlimited use. The centralized recycle center concept allows application of state-of-the-art decontamination technology resulting in a reduction in utility disposal costs and a reduction in overall net amount of material being buried. Examples of specific decontamination process activities at the centralized facility will be reviewed along with a discussion of the economic impact of decontamination for recycling and volume reduction. Based on almost two years of operation of a centralized decontamination facility, a demonstrated capability exists. The concept has been cost effective and proves that valuable resources can be recycled

  3. Waste, recycling, and 'Design for Environment': Roles for markets and policy instruments

    International Nuclear Information System (INIS)

    Calcott, Paul; Walls, Margaret

    2005-01-01

    Households sometimes have two recycling options. Curbside recycling collections are convenient, but do not provide payment. Alternatively, payment might be available from 'reverse vending machines' or drop-off centers, but some transaction costs would be incurred. We examine policies to encourage efficient product design and recycling in a setting with these two recycling options plus the option of putting recyclables in the trash. We find value in having two parallel recycling options. Constrained optimal outcomes can be attained by combining a 'deposit-refund' with a modest disposal fee. Furthermore, producers should not be permitted to keep deposits, that are not claimed by consumers. (author)

  4. An overview of the regulation of the activities of Eldorado Nuclear Limited in Port Hope, Ontario

    International Nuclear Information System (INIS)

    Smythe, W.D.

    1980-09-01

    Eldorado Nuclear Limited's operations at Port Hope, Ontario include both chemical and metallurgical processes involved in processing uranium in various forms. The plant processes natural uranium for both the domestic and export markets, and processes enriched uranium for the fuel in Canada's research reactors and for booster fuel for Candu reactors. The plant receives wastes from fuel fabrication plants and recycles them to recover uranium, and also produces wastes of its own. The Atomic Energy Control Board (AECB) is involved at all stages of this operation, as the agency responsible for nuclear materials management, safeguards, occupational health and safety, and safe disposal of wastes in all Canada's nuclear facilities. The AECB has also been involved in the clean up of contamination from the early days of operations in Port Hope

  5. Hope in Motion

    Science.gov (United States)

    Yeasting, Kevin; Jung, Sandy

    2010-01-01

    Hope has been described by many as a basic, fundamental, and essential part of life. This article introduces a new approach to incorporate hope with clients experiencing a range of difficulties in the general counseling setting. In this framework, three stages are proposed to enable clients to strengthen and solidify their hope. In the first…

  6. Pedagogies of Hope

    Science.gov (United States)

    Webb, Darren

    2013-01-01

    Hoping is an integral part of what it is to be human, and its significance for education has been widely noted. Hope is, however, a contested category of human experience and getting to grips with its characteristics and dynamics is a difficult task. The paper argues that hope is not a singular undifferentiated experience and is best understood as…

  7. Ways of Hoping: Navigating the Paradox of Hope and Despair in Chronic Pain.

    Science.gov (United States)

    Eaves, Emery R; Nichter, Mark; Ritenbaugh, Cheryl

    2016-03-01

    In this paper, we explore hope in the context of living with chronic pain. Individuals with chronic pain from temporomandibular disorder(s) were interviewed four to five times over the course of their 18-month participation in a clinical trial investigating the effectiveness of Traditional Chinese Medicine. We sought to understand shifts in participants' descriptions of expectations and hopefulness, particularly with regard to the work involved in counterbalancing positive thinking with buffers against disappointment. We found hope to be a dynamic and multifaceted mindset as distinct from being a single entity to be measured. Drawing upon Polanyi's concept of tacit knowing, we explore how different ways of hoping emerge and index one another in participant narratives. We offer a working typology of hope and raise as an issue the manner in which the paradox of hope--hoping enough to carry on while keeping hopes in check to avoid the ever-present possibility of despair--complicates simplistic notions of the relationship between positive thinking and the placebo response.

  8. Design study on advanced nuclear fuel recycle system. Conceptual design study of recycle system using molten salt

    International Nuclear Information System (INIS)

    Kasai, Y.; Kakehi, I.; Moro, T.; Higashi, T.; Tobe, K.; Kawamura, F.; Yonezawa, S.; Yoshiuji, T.

    1998-10-01

    Advanced recycle system engineering group of OEC (Oarai Engineering Center) has being carried out a design study of the advanced nuclear fuel recycle system using molten salt (electro-metallurgical process). This system is aiming for improvements of fuel cycle economy and reduction of environmental burden (MA recycles, Minimum of radioactive waste disposal), and also improvement of safety and nuclear non-proliferation. This report describes results of the design study that has been continued since December 1996. (1) A design concept of the advanced nuclear fuel recycle system, that is a module type recycles system of pyrochemical reprocessing and fuel re-fabrication was studied. The module system has advantage in balance of Pu recycle where modules are constructed in coincidence with the construction plan of nuclear power plants, and also has flexibility for technology progress. A demonstration system, minimum size of the above module, was studies. This system has capacity of 10 tHM/y and is able to demonstrate recycle technology of MOX fuel, metal fuel and nitride fuel. (2) Each process of the system, which are pyrochemical electrorefining system, cathode processor, de-cladding system, waste disposal system, etc., were studied. In this study, capacity of an electrorefiner was discussed, and vitrification experiment of molten salt using lead-boric acid glass was conducted. (3) A hot cell system and material handling system of the demonstration system was studied. A robot driven by linear motor was studied for the handling system, and an arrangement plan of the cell system was made. Criticality analysis in the cell system and investigation of material accountancy system of the recycle plant were also made. This design study will be continued in coincidence with design study of reactor and fuel, aiming to establish the concept of FBR recycle system. (author)

  9. A model for evaluating the flow rate of an extruder for plastic recycling

    International Nuclear Information System (INIS)

    Oke, S.A.; Popoola, I.O.

    2007-01-01

    For several years, Municipal Solid Wastes (MSW) from packaging, newspapers, batteries, furniture, metals, clothing's, bottles, and food scraps have contributed negatively to the increased deterioration of our environments particularly in developing countries. It has resulted in activities that threaten lives (such as disease outbreaks and severe health hazards). As a result, governments and other stakeholders in environment have considered both theoretical and practical approaches to waste control. Recycling, which has enormous benefits of reducing manufacturing cost of new products and providing employment for the populace has been chosen as a viable option. Despite the multi-disciplinary efforts involved recycling models, guidelines applicable in the design of flow rates of extruders for plastic recycling processes are missing. This gap is addressed in the current paper. This paper conceptualizes the flow rates as an input-output system in a continuous dynamic state. With a focus on the melting activity (operation section), the analysis of flow in the metering zone involves an estimation of the quantity of recycled materials that could be produced per time. The work hopefully stimulates research in an area where quantitative methodologies are sparse. (author)

  10. Making Ripples of Hope

    Science.gov (United States)

    Lopez, Shane J.

    2011-01-01

    Hope, the ideas and energy for the future, is one of the most potent predictors of the success of the youth. Based on the Gallup Student Poll, an online school-based measure of student hope (and engagement and well-being), half of American students are hopeful. Hopeful students are energetic, full of life. They're able to develop many strategies…

  11. Determining the success of curbside recycling programs by surveys and direct measurement

    Energy Technology Data Exchange (ETDEWEB)

    Everett, J.W. [Univ. of Oklahoma, Norman, OK (United States). School of Civil Engineering and Environmental Science; Riley, P.C. [Waste Management of Oklahoma, Inc., Oklahoma City, OK (United States)

    1998-12-31

    Curbside collection of recyclable material can be expensive because the inherent costs of curbside collection are high, but also because amounts collected per residence are small compared to the total waste stream, and extra time may be required to carry out additional activities, such as sorting. A better understanding of how households participate in curbside recycling programs may help operators reduce costs. In this paper, a survey and direct observation of set-out behavior are used to increase the understanding of a recycling program in the City of the Village, OK. Specifically, the paper addresses: (1) relationships between set-out amount, set-out frequency, and demographics; and (2) respondent awareness of their own recycling behavior and activity on their street. Analysis of set-out amount, set-out frequency, and household size data indicates that, on average, smaller households set out less recyclables overall, but more per person, compared to larger households. As expected, set-out frequency appears to be related to the amount of recyclables set out for collection; houses storing more recyclables per week set them out more often. However, infrequent participants (one set-out in ten weeks) set out less material per week than other participating households, but in larger amounts. On the rare occasions that they set out material, they set out approximately 25 pounds of materials, whereas the average amount set out by other households is less than 15 pounds per set-out. Variability in set-out frequency and amount, not explained by household size or other demographic variables, indicates that other factors are important. There is hope that program operators can influence participants to minimize set-out frequency, thus increasing the efficiency of collection.

  12. Hanford recycling

    Energy Technology Data Exchange (ETDEWEB)

    Leonard, I.M.

    1996-09-01

    This paper is a study of the past and present recycling efforts on the Hanford site and options for future improvements in the recycling program. Until 1996, recycling goals were voluntarily set by the waste generators: this year, DOE has imposed goals for all its sites to accomplish by 1999. Hanford is presently meeting the voluntary site goals, but may not be able to meet all the new DOE goals without changes to the program. Most of these new DOE goals are recycling goals: * Reduce the generation of radioactive (low-level) waste from routine operations 50 percent through source reduction and recycling. * Reduce the generation of low-level mixed waste from routine operations 50 percent through source reduction and recycling. * Reduce the generation of hazardous waste from routine operations 50 percent through source reduction and recycling. * Recycle 33 percent of the sanitary waste from all operations. * Increase affirmative procurement of EPA-designated recycled items to 100 percent. The Hanford recycling program has made great strides-there has been a 98 percent increase in the amount of paper recycled since its inception in 1990. Hanford recycles paper, chemicals cardboard, tires, oil, batteries, rags, lead weights, fluorescent tubes, aerosol products, concrete, office furniture, computer software, drums, toner cartridges, and scrap metal. Many other items are recycled or reused by individual groups on a one time basis without a formal contract. Several contracts are closed-loop contracts which involve all parts of the recycle loop. Considerable savings are generated from recycling, and much more is possible with increased attention and improvements to this program. General methods for improving the recycling program to ensure that the new goals can be met are: a Contract and financial changes 0 Tracking database and methods improvements 0 Expanded recycling efforts. Specifically, the Hanford recycling program would be improved by: 0 Establishing one overall

  13. Sisters Hope

    DEFF Research Database (Denmark)

    Lawaetz, Anna; Worre Hallberg, Gry

    2011-01-01

    Sisters Hope invites young scholars to visit our elite-school for run-away youngsters. Maybe you will be the next one to be collected and accepted?......Sisters Hope invites young scholars to visit our elite-school for run-away youngsters. Maybe you will be the next one to be collected and accepted?...

  14. Compositional data analysis of household waste recycling centres in Denmark

    DEFF Research Database (Denmark)

    Edjabou, Maklawe Essonanawe; Martín-Fernández, J. A.; Boldrin, Alessio

    of these projects on the recycling rates does not exist. Thus, compositional data analysis technique was applied to analyze consistently waste data. Based on the waste composition obtained from a recycling center in Denmark, we analyzed the composition of waste treatment and disposal options. Zero and non......The Danish government has set a target of 50% recycling rates for household waste by 2022. To achieve this goal, the Danish municipalities should increase the source separation of household waste. While significant knowledge and experiences were locally gained, lessons learnt have not been...

  15. Hope and the uncertain future

    OpenAIRE

    PIETARINEN JUHANI

    2014-01-01

    Benedict Spinoza defined hope as an inconstant joy inconstant, because hope involves uncertainty and doubt. Hope means optimism mixed with pessimistic feelings. For Spinoza, hope amounts to an increase in our inherent active power, in our vitality or love of life, but because of being associated with fear, hope also involves something which is apt to reduce this power. Our beliefs concerning future outcomes are crucial here. They form the ultimate basis of our hope.

  16. From hope to hope: the experience of older Chinese people with advanced cancer.

    Science.gov (United States)

    Chen, Hong; Komaromy, Carol; Valentine, Christine

    2015-03-01

    In our study that explored the current end-of-life care provision for Chinese older people with advanced/terminal cancer, hope emerged as a significant aspect of coping with their condition. Drawing on data from in-depth interviews with a group of older people, their family carers and health professionals, this article explores participants' constructions of hope in terms of what they were hoping for, how their hopes helped them cope with their illness and what sociocultural resources they drew on to build and sustain these hopes. While acknowledging similarities to Western studies of hope in terminal illness, this article identifies significant divergences in terms of the impact of different sociocultural values and their implications for clinical practice in light of an unfavourable health care environment for patients with advanced cancer and a social support system sustained mainly by Chinese families. It argues that hope represents an important resource for coping with terminal illness among these patients. © The Author(s) 2014.

  17. Recycling-Oriented Product Characterization for Electric and Electronic Equipment as a Tool to Enable Recycling of Critical Metals

    Science.gov (United States)

    Rotter, Vera Susanne; Chancerel, Perrine; Ueberschaar, Maximilian

    To establish a knowledge base for new recycling processes of critical elements, recycling-orientated product characterization for Electric and Electronic Equipment (EEE) can be used as a tool. This paper focuses on necessary data and procedures for a successful characterization and provides information about existing scientific work. The usage of this tool is illustrated for two application: Hard Disk Drives (HDD) and Liquid Crystal Display (LCD) panels. In the first case it could be shown that Neodymium and other Rare Earth Elements are concentrated in magnets (25% by weight) and contribute largely to the end demand of Neodymium. Nevertheless, recycling is limited by the difficult liberation and competing other target metals contained in HDD. In the second case it could be shown that also for this application the usage of Indium is concentrated in LCDs, but unlike in magnets the concentration is lower (200 ppm). The design of LCDs with two glued glass layers and the Indium-Tin-Oxide layer in between make the Indium inaccessible for hydro-metallurgical recovery, the glass content puts energetic limitations on pyro-metallurgical processes. For the future technical development of recycling infrastructure we need an in depth understanding of product design and recycling relevant parameters for product characterization focusing on new target metals. This product-centered approach allows also re-think traditional "design for recycling" approaches.

  18. Hope and Hopelessness: The Role of Hope in Buffering the Impact of Hopelessness on Suicidal Ideation.

    Science.gov (United States)

    Huen, Jenny M Y; Ip, Brian Y T; Ho, Samuel M Y; Yip, Paul S F

    2015-01-01

    The present study investigated whether hope and hopelessness are better conceptualized as a single construct of bipolar spectrum or two distinct constructs and whether hope can moderate the relationship between hopelessness and suicidal ideation. Hope, hopelessness, and suicidal ideation were measured in a community sample of 2106 participants through a population-based household survey. Confirmatory factor analyses showed that a measurement model with separate, correlated second-order factors of hope and hopelessness provided a good fit to the data and was significantly better than that of the model collapsing hope and hopelessness into a single second-order factor. Negative binomial regression showed that hope and hopelessness interacted such that the effect of hopelessness on suicidal ideation was lower in individuals with higher hope than individuals with lower hope. Hope and hopelessness are two distinct but correlated constructs. Hope can act as a resilience factor that buffers the impact of hopelessness on suicidal ideation. Inducing hope in people may be a promising avenue for suicide prevention.

  19. Innovation sows seeds of hope in dry areas | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2013-01-23

    Jan 23, 2013 ... The International Center for Agricultural Research in the Dry Areas was founded ... brought hope to people across Africa and in parts of Latin America and Asia. ... make value-added products like sheep or goat's milk yogourt and cheese. ... IDRC's LASTING IMPACTS > MIDDLE EAST AND NORTH AFRICA ...

  20. Belief, hope and faith.

    Science.gov (United States)

    Figueiredo, Luis Claudio

    2004-12-01

    A case of hysteria is presented in order to create a frame of reference for the author's approach to the concepts of hope, belief and faith. A difference between hope as a 'sad passion' (which is here called regressive hope) and hope as a principle of mental functioning is established. The concept of hope will at first always be based on beliefs--either beliefs organised in the paranoid-schizoid position (called here fragmented and delusional beliefs)--or those organised from the depressive position (complex systems of beliefs, which end up being dogmatic); the latter typically occur in neurotics. It is suggested here that there is another possibility for hope, which is based on faith. The meaning of faith is considered here externally to the religious sense. The solid establishment of hope as a principle--based on faith--can be viewed as responsible for the opening up of creative potentials and as one of the main aims of analysis. Such an aim, however requires the establishment of a deep relationship, both in theory and in clinical practice, between the Kleinian question of the depressive position and the Freudian question of the Oedipus complex.

  1. Survivability and Hope

    Science.gov (United States)

    ... Current Issue Past Issues Special Section Survivability and Hope Past Issues / Spring 2007 Table of Contents For ... cure or long-term survivorship." This message of hope is a hallmark of the latest advances in ...

  2. Hope and Hopelessness: The Role of Hope in Buffering the Impact of Hopelessness on Suicidal Ideation

    Science.gov (United States)

    Huen, Jenny M. Y.; Ip, Brian Y. T.; Ho, Samuel M. Y.; Yip, Paul S. F.

    2015-01-01

    Objectives The present study investigated whether hope and hopelessness are better conceptualized as a single construct of bipolar spectrum or two distinct constructs and whether hope can moderate the relationship between hopelessness and suicidal ideation. Methods Hope, hopelessness, and suicidal ideation were measured in a community sample of 2106 participants through a population-based household survey. Results Confirmatory factor analyses showed that a measurement model with separate, correlated second-order factors of hope and hopelessness provided a good fit to the data and was significantly better than that of the model collapsing hope and hopelessness into a single second-order factor. Negative binomial regression showed that hope and hopelessness interacted such that the effect of hopelessness on suicidal ideation was lower in individuals with higher hope than individuals with lower hope. Conclusions Hope and hopelessness are two distinct but correlated constructs. Hope can act as a resilience factor that buffers the impact of hopelessness on suicidal ideation. Inducing hope in people may be a promising avenue for suicide prevention. PMID:26107687

  3. Fundamental Hope and Practical Identity

    NARCIS (Netherlands)

    Bloeser, Claudia; Stahl, Titus

    2017-01-01

    This article considers the question 'What makes hope rational?' We take Adrienne Martin's recent incorporation analysis of hope as representative of a tradition that views the rationality of hope as a matter of instrumental reasons. Against this tradition, we argue that an important subset of hope,

  4. Hope for health and health care.

    Science.gov (United States)

    Stempsey, William E

    2015-02-01

    Virtually all activities of health care are motivated at some level by hope. Patients hope for a cure; for relief from pain; for a return home. Physicians hope to prevent illness in their patients; to make the correct diagnosis when illness presents itself; that their prescribed treatments will be effective. Researchers hope to learn more about the causes of illness; to discover new and more effective treatments; to understand how treatments work. Ultimately, all who work in health care hope to offer their patients hope. In this paper, I offer a brief analysis of hope, considering the definitions of Hobbes, Locke, Hume and Thomas Aquinas. I then differentiate shallow and deep hope and show how hope in health care can remain shallow. Next, I explore what a philosophy of deep hope in health care might look like, drawing important points from Ernst Bloch and Gabriel Marcel. Finally, I suggest some implications of this philosophy of hope for patients, physicians, and researchers.

  5. Hope, Symptoms, and Palliative Care.

    Science.gov (United States)

    Davis, Mellar P; Lagman, Ruth; Parala, Armida; Patel, Chirag; Sanford, Tanya; Fielding, Flannery; Brumbaugh, Anita; Gross, James; Rao, Archana; Majeed, Sumreen; Shinde, Shivani; Rybicki, Lisa A

    2017-04-01

    Hope is important to patients with cancer. Identifying factors that influence hope is important. Anxiety, depression, fatigue, and pain are reported to impair hope. The objective of this study was to determine whether age, gender, marital status, duration of cancer, symptoms, or symptom burden measured by the sum of severity scores on the Edmonton Symptom Assessment Scale (ESAS) correlated with hope measured by the Herth Hope Index (HHI). Patients with advanced cancer in a palliative care unit participated. Demographics including age, gender, marital status, cancer site, and duration of cancer were collected. Individuals completed the ESAS and HHI. Spearman correlation and linear regression were used to assess associations adjusting for gender (male vs female), age ( 12 months). One hundred and ninety-seven were participated in the study, of which 55% were female with a mean age of 61 years (standard deviation 11). Hope was not associated with gender, age, marital status, or duration of cancer. In univariable analysis, hope inversely correlated with ESAS score (-0.28), lack of appetite (-0.22), shortness of breath (-0.17), depression (-0.39), anxiety (-0.32), and lack of well-being (-0.33); only depression was clinically relevant. In multivariable analysis, total symptom burden weakly correlated with hope; only depression remained clinically significant. This study found correlation between symptom burden and hope was not clinically relevant but was so for depression. Among 9 ESAS symptoms, only depression had a clinically relevant correlation with hope.

  6. Understanding hope and factors that enhance hope in women with breast cancer.

    Science.gov (United States)

    Ebright, Patricia R; Lyon, Brenda

    2002-04-01

    To examine the extent to which antecedent variables and appraisals differentiate levels of hope in women during treatment for breast cancer. Descriptive, correlational. Two large midwestern urban areas. 73 Caucasian women between the ages of 20-73 with first-time diagnosis of breast cancer; recruited through five physician offices; within three months after surgical intervention with planned chemotherapy, radiation therapy, or tamoxifen; and able to read English. Identical surveys mailed to participants 3 and 12 months after surgery. Instruments included Lazarus' Appraisal Components and Themes Scales, Herth Hope Index, Rosenberg's Self-Esteem Scale, Personal Resource Questionnaire 85-Part 2, Helpfulness of Religious Beliefs Scale, and demographics questionnaire. Appraisal, hope, self-esteem, social support, and helpfulness of religious beliefs. Variables influencing appraisals during breast cancer treatment on both surveys were self-esteem and helpfulness of religious beliefs. Potential for coping appraisals and self-esteem contributed to variation in hope at both time points. Social support was a significant contributor to hope in the 12-month survey. Appraisal themes reflected challenge but not fear. Self-esteem and helpfulness of religious beliefs influence women's appraisals regarding the potential for coping; appraisals and antecedent variables relevant for differentiating hope are beliefs about the potential for coping, self-esteem, and social support. Care of women with breast cancer during the first year of treatment should include assessment of beliefs regarding the potential for coping. Results suggest that support for interventions related to self-esteem, social support, and helpfulness of religious beliefs increase confidence in coping abilities and hope.

  7. The importance of recycling - Responsible recycling

    International Nuclear Information System (INIS)

    Svensson, Joens Petter

    2014-01-01

    7 times the total emissions from Sweden are saved each year by the recycling industry. It reduces CO 2 emissions and saves the environment. In fact it annually reduces global CO 2 emissions by 500 million tons, which is more than what is being emitted by the world wide aviation industry. Recycling of iron and steel saves 74% energy and reduces water and air pollution by respectively 76% and 86%, compared to primary production. It provides new raw materials and contributes to save energy. There's no sense in producing goods in a permanent material like plastics, that's supposed to be used only once. It's a huge waste of resources. Today the recycling industry provides half of the world's raw materials and this figure is set to increase. It's about environmentally sound management of resources. It's about plain common sense. There has to be a political willingness to facilitate recycling in every way. And from a corporate perspective social responsibility is becoming an increasingly important competitive edge. This is also a communication issue, it has to be a fact that is well known to the market when a company is doing valuable environmental work. We also need a well functioning global market with easy to understand regulations to facilitate global trade. The global demand for recycled materials should influence their collection and use. Fraud and theft has also to be kept at bay which calls for a close collaboration between organizations such as The International Chamber of Commerce, The International Trade Council and the International Maritime Bureau of the commercial crime services. Increasing recycling is the only way to go if we want to minimize our effect on the environment. We have to remember that recycling is essential for the environment. An increase would be a tremendous help to reduce the green house effect. Increasing recycling is not rocket science. We know how to do it, we just have to decide to go through with it

  8. Recycling Facilities - Land Recycling Cleanup Locations

    Data.gov (United States)

    NSGIC Education | GIS Inventory — Land Recycling Cleanup Location Land Recycling Cleanup Locations (LRCL) are divided into one or more sub-facilities categorized as media: Air, Contained Release or...

  9. Nuclear recycling

    International Nuclear Information System (INIS)

    Spinrad, B.I.

    1985-01-01

    This paper discusses two aspects of the economics of recycling nuclear fuel: the actual costs and savings of the recycling operation in terms of money spent, made, and saved; and the impact of the recycling on the future cost of uranium. The authors review the relevant physical and chemical processes involved in the recycling process. Recovery of uranium and plutonium is discussed. Fuel recycling in LWRs is examined and a table presents the costs of reprocessing and not reprocessing. The subject of plutonium in fast reactors is addressed. Safeguards and weapons proliferation are discussed

  10. Hope grounded in belief: Influences of reward for application and social cynicism on dispositional hope.

    Science.gov (United States)

    Bernardo, Allan B I

    2013-12-01

    Two studies explore whether general beliefs about the social world or social axioms may be antecedents of dispositional hope. Social axioms are generalized cognitive representations that provide frames for constructing individuals' hope-related cognitions. Considering social axioms' instrumental and ego-defensive functions, two social axioms, social cynicism and reward for application are hypothesized to be negative and positive predictors of hope, respectively. Study 1 used multiple regression analysis to test the hypothesis. Study 2 used structural equation modeling to test the model with a pathway linking reward for application with hope, and another pathway linking social cynicism and hope that is mediated by self-esteem. The results are discussed in terms of extending the range of psychological constructs and processes that foster the development of hope. © 2013 The Scandinavian Psychological Associations.

  11. How Much Hope Is Enough? Levels of Hope and Students' Psychological and School Functioning

    Science.gov (United States)

    Marques, Susana C.; Lopez, Shane J.; Fontaine, Anne Marie; Coimbra, Susana; Mitchell, Joanna

    2015-01-01

    This study investigated the characteristics of students who report extremely high levels of hope. A sample of 682 students (ages 11-17) completed measures of hope, school engagement, life satisfaction, self-worth, and mental health. Academic achievement was obtained from students' school records. Based on their hope scores, students were divided…

  12. The meaning of hope in nursing research

    DEFF Research Database (Denmark)

    Hammer, Kristianna; Mogensen, Ole; Hall, Elisabeth O C

    2009-01-01

    regardless of whether the human being was healthy, chronically or terminally ill. They comprise the complexity of hope and were: living in hope, hoping for something, hope as a light on the horizon, hope as a human-to-human relationship, hope vs. hopelessness and fear: two sides of the same coin, and hope......Scand J Caring Sci; 2009 The meaning of hope in nursing research: a meta-synthesisThe aim of this study was to develop a meta-synthesis of nursing research about hope as perceived by people during sickness and by healthy people. A meta-synthesis does not intend to cover all studies about hope....... Data were 15 qualitative studies published in nursing or allied health journals and conducted in USA, Great Britain, Canada, Australia, Norway, Sweden and Finland. The meta-synthesis resulted in six metaphors that illustrate dimensions of hope. These metaphors permeated the experiences of hope...

  13. Hope as fantasy in action

    DEFF Research Database (Denmark)

    Winther-Lindqvist, Ditte Alexandra

    ’s attempts for upholding a conduct of everyday life. I argue that hoping serves as a meaning horizon, a gegenstand for adjusting to the ongoing challenges that living with illness impose on the families. Hoping is an imaginary backdrop, against which events and tasks, moods and impressions are experienced......Drawing on Vygotsky’s theory of imagination (Vygotsky 2004) I am proposing a phenomenology of hoping as fantasy in action. Based on analysis of 35 interviews with teenagers who are living in households with a somatically ill parent, I suggest that hoping plays a central role in the teenager...... and evaluated, and thus the fantasies involved in hoping becomes constitutive for experiencing. I apply Vygotsky’s experiential view of imaginary activities and explore the experiential status of the “imagined” and the relation between imagining and the real, through the empirical material on hope. This work...

  14. Modelling Recycling Targets

    DEFF Research Database (Denmark)

    Hill, Amanda Louise; Leinikka Dall, Ole; Andersen, Frits M.

    2014-01-01

    Within the European Union (EU) a paradigm shift is currently occurring in the waste sector, where EU waste directives and national waste strategies are placing emphasis on resource efficiency and recycling targets. The most recent Danish resource strategy calculates a national recycling rate of 22......% for household waste, and sets an ambitious goal of a 50% recycling rate by 2020. This study integrates the recycling target into the FRIDA model to project how much waste and from which streams should be diverted from incineration to recycling in order to achieve the target. Furthermore, it discusses how...... the existing technological, organizational and legislative frameworks may affect recycling activities. The results of the analysis show that with current best practice recycling rates, the 50% recycling rate cannot be reached without recycling of household biowaste. It also shows that all Danish municipalities...

  15. Recycling Lesson Plan

    Science.gov (United States)

    Okaz, Abeer Ali

    2013-01-01

    This lesson plan designed for grade 2 students has the goal of teaching students about the environmental practice of recycling. Children will learn language words related to recycling such as: "we can recycle"/"we can't recycle" and how to avoid littering with such words as: "recycle paper" and/or "don't throw…

  16. Japan, the European Union, and Waste Electronic and Electrical Equipment Recycling: Key Lessons Learned

    OpenAIRE

    Yoshida, Fumikazu; Yoshida, Haruyo

    2010-01-01

    This article considers how Japan and the EU manage the recycling of consumer appliances and PCs/cellular phones through a review of their current collection and treatment systems for WEEE (waste electronic and electrical equipment), and on the basis of its findings offers recommendations for the improvement of these systems. We hope thereby to provide information that will be helpful for the better management of WEEE in developed countries as well as in our own. On the basis of our findings, ...

  17. Nutrient and media recycling in heterotrophic microalgae cultures.

    Science.gov (United States)

    Lowrey, Joshua; Armenta, Roberto E; Brooks, Marianne S

    2016-02-01

    In order for microalgae-based processes to reach commercial production for biofuels and high-value products such as omega-3 fatty acids, it is necessary that economic feasibility be demonstrated at the industrial scale. Therefore, process optimization is critical to ensure that the maximum yield can be achieved from the most efficient use of resources. This is particularly true for processes involving heterotrophic microalgae, which have not been studied as extensively as phototrophic microalgae. An area that has received significant conceptual praise, but little experimental validation, is that of nutrient recycling, where the waste materials from prior cultures and post-lipid extraction are reused for secondary fermentations. While the concept is very simple and could result in significant economic and environmental benefits, there are some underlying challenges that must be overcome before adoption of nutrient recycling is viable at commercial scale. Even more, adapting nutrient recycling for optimized heterotrophic cultures presents some added challenges that must be identified and addressed that have been largely unexplored to date. These challenges center on carbon and nitrogen recycling and the implications of using waste materials in conjunction with virgin nutrients for secondary cultures. The aim of this review is to provide a foundation for further understanding of nutrient recycling for microalgae cultivation. As such, we outline the current state of technology and practical challenges associated with nutrient recycling for heterotrophic microalgae on an industrial scale and give recommendations for future work.

  18. Waste material recycling: Assessment of contaminants limiting recycling

    DEFF Research Database (Denmark)

    Pivnenko, Kostyantyn

    systematically investigated. This PhD project provided detailed quantitative data following a consistent approach to assess potential limitations for the presence of chemicals in relation to material recycling. Paper and plastics were used as illustrative examples of materials with well-established recycling...... schemes and great potential for increase in recycling, respectively. The approach followed in the present work was developed and performed in four distinct steps. As step one, fractional composition of waste paper (30 fractions) and plastics (9 fractions) from households in Åbenrå municipality (Southern...... detrimental to their recycling. Finally, a material flow analysis (MFA) approach revealed the potential for accumulation and spreading of contaminants in material recycling, on the example of the European paper cycle. Assessment of potential mitigation measures indicated that prevention of chemical use...

  19. Challenges in legislation, recycling system and technical system of waste electrical and electronic equipment in China.

    Science.gov (United States)

    Zhang, Shengen; Ding, Yunji; Liu, Bo; Pan, De'an; Chang, Chein-chi; Volinsky, Alex A

    2015-11-01

    Waste electrical and electronic equipment (WEEE) has been one of the fastest growing waste streams worldwide. Effective and efficient management and treatment of WEEE has become a global problem. As one of the world's largest electronic products manufacturing and consumption countries, China plays a key role in the material life cycle of electrical and electronic equipment. Over the past 20 years, China has made a great effort to improve WEEE recycling. Centered on the legal, recycling and technical systems, this paper reviews the progresses of WEEE recycling in China. An integrated recycling system is proposed to realize WEEE high recycling rate for future WEEE recycling. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. New Hope for Stopping HIV - Testing and Medical Care Save Lives

    Centers for Disease Control (CDC) Podcasts

    2011-11-29

    This podcast is based on the December 2011 CDC Vital Signs report, "HIV Prevention through Care and Treatment" that shares new hope for preventing HIV and improving the health of people with HIV.  Created: 11/29/2011 by Centers for Disease Control and Prevention (CDC).   Date Released: 11/29/2011.

  1. "Hope is that fiery feeling": Using Poetry as Data to Explore the Meanings of Hope for Young People

    Directory of Open Access Journals (Sweden)

    Emily Bishop

    2014-01-01

    Full Text Available Poetic inquiry is a contentious area of qualitative research. In this article, we discuss some of the issues plaguing this field of inquiry. We then analyse a collection of poems about hope written by a sample of young people from Tasmania, Australia. The poems were written as part of the 2011 Tree of Hope project, which utilised multiple, arts-based methods to provide insights into what young people hope for in the future and the role of hope in their lives. Participants utilised one of three poetic structures. While each structure produced distinct themes, a connection between "hope and happiness" overlapped the two structured types of poetry—the acrostic and sense poetry. However, when writing free verse poetry, the expression of additional dimensions of hope, including the flipside of both having hope and losing hope was evident. We conclude that hope is particularly important to young people and that inviting participant-voiced poetry is an effective technique for investigating conceptual topics such as young people and hope. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs140194

  2. Innovation in Sustainable Education and Entrepreneurship through the UKM Recycling Center Operations

    Science.gov (United States)

    Zain, Shahrom Md; Basri, Noor Ezlin Ahmad; Mahmood, Nur Ajlaa; Basri, Hassan; Yaacob, Mashitoh; Ahmad, Maisarah

    2013-01-01

    Sustainable education and entrepreneurship through practical learning activities are necessary for students in higher education institutions. Students must experience real situations to develop an attitude and personality of caring for the environment, and they can acquire entrepreneurship education by managing transactions with recyclables. The…

  3. Researching the meaning of life: finding new sources of hope.

    Science.gov (United States)

    Alon, Shirly

    2010-01-01

    The purpose of the paper is to discuss means of assisting terminally ill patients in seeking for sources of meaning and hope, alongside the acknowledgment that their lifespan is short.Psycho-spiritual aspects make a substantial component patients suffering from incurable illness have to deal with. Evaluating and mapping the causes and expressions of psychological--spiritual suffering may assist in tailoring appropriate strategies of distress relief. Therefore, interventions should be given in accordance with their specific focus of difficulties, as well as with wishes and needs. Appropriate interventions in palliative psychotherapeutic rapport are inspired by identifying new sources for meaning in current life (sometimes, aided by past experiences or future visions). Reinforcing sources for meaning may attempt in providing patients amongst:--equilibrium, between suffering and sorrow (which sometimes take over the patient's world), and on the other hand, new experiences, sense of satisfaction and fulfillment. Individual's acknowledgment that he is not completely withdrawn from the circle of life, and yet significance and fulfillment in life still exists. For a holistic meaning ? centered intervention it is advisable to simultaneously integrate two central axes: the existential analysis, inspired by concepts driven from Frenkl's Logotherapy, such as freedom of choice, personal responsibility, inner truth, hope and transcendentalism; the operative axis, enhancing meaning and hope by assisting patient's wishes come true. Patients are aware, many times, that those wishes may be their last one, therefore perceive their fulfillment as crucial for their sense of meaning. Moreover, those wishes may elevate patient and family's spirit and reduce risk of demoralization. Whereas existential--spiritual interventions are recommended to be given by qualified professional therapists, the operation of fulfilling wishes is feasible by everyone, from family members to multi

  4. Separability studies of construction and demolition waste recycled sand.

    Science.gov (United States)

    Ulsen, Carina; Kahn, Henrique; Hawlitschek, Gustav; Masini, Eldon A; Angulo, Sérgio C

    2013-03-01

    The quality of recycled aggregates from construction and demolition waste (CDW) is strictly related to the content of porous and low strength phases, and specifically to the patches of cement that remain attached to the surface of natural aggregates. This phase increases water absorption and compromises the consistency and strength of concrete made from recycled aggregates. Mineral processing has been applied to CDW recycling to remove the patches of adhered cement paste on coarse recycled aggregates. The recycled fine fraction is usually disregarded due to its high content of porous phases despite representing around 50% of the total waste. This paper focus on laboratory mineral separability studies for removing particles with a high content of cement paste from natural fine aggregate particles (quartz/feldspars). The procedure achieved processing of CDW by tertiary impact crushing to produce sand, followed by sieving and density and magnetic separability studies. The attained results confirmed that both methods were effective in reducing cement paste content and producing significant mass recovery (80% for density concentration and 60% for magnetic separation). The production of recycled sand contributes to the sustainability of the construction environment by reducing both the consumption of raw materials and disposal of CDW, particularly in large Brazilian centers with a low quantity of sand and increasing costs of this material due to long transportation distances. Copyright © 2012 Elsevier Ltd. All rights reserved.

  5. Parental hope for children with advanced cancer.

    Science.gov (United States)

    Kamihara, Junne; Nyborn, Justin A; Olcese, Maura E; Nickerson, Taylor; Mack, Jennifer W

    2015-05-01

    Previous work suggests that parents of children with cancer can remain hopeful despite receiving prognostic information, but we know little about what hope means to such parents, or the extent to which parents can feel hopeful even while facing the child's impending death. We audiotaped conversations between clinicians and parents of 32 children with relapsed or refractory cancer, and then interviewed parents about their hopes and expectations for their child. Parent statements about prognosis in interviews mirrored those made by clinicians during discussions about the child's diagnosis with refractory or relapsed cancer. Clinicians used language referring to hope during these conversations but did not ask parents directly about their hopes. Parents expressed a range of hopes for their children, from hopes related to cure or treatment response, to quality of life, normalcy, and love and relationships for the child. For most parents, expectations about prognosis were not aligned with their hopes for the child; for example, many parents hoped for a cure and also reported that they did not believe cure was possible. Many parents were able to acknowledge this incongruence. Parents accurately conveyed the reality of their child's serious condition in the setting of advanced cancer, and yet maintained hope. Hopes were not limited to hope for cure/treatment response. Clinicians should be encouraged to engage in direct conversations about hope with parents as a means to elicit realistic hopes that can help to focus the most meaningful plans for the child and family. Copyright © 2015 by the American Academy of Pediatrics.

  6. The Relationship between Body Esteem and Hope and Mental Health in Breast Cancer Patients after Mastectomy.

    Science.gov (United States)

    Heidari, Mohammad; Ghodusi, Mansureh

    2015-01-01

    Breast cancer and its treatment, including mastectomy, can cause feelings of mutilation, depreciation in the value of the body, reduction in attractiveness, and lead to mental disorders and hopelessness. The present study aimed to determine the relationship between appreciating the body, hope and mental health in women with breast cancer after mastectomy. This study was a descriptive study of 100 breast cancer patients who had undergone mastectomy and referred to the Sayed Al-Shohada Medical Center in Isfahan, Iran. The subjects were selected by convenient sampling. Data gathering tools were the Body Esteem Scale (BES), Herth Hope Index (HHI), and Symptom Checklist 25 (SCL-25) mental health questionnaire. Data analysis was performed using SPSS software. Most of the patients had low body esteem. There was a significant direct linear relationship between body esteem and hope and mental health. This relationship was stronger between valuing the body and hope. Body esteem has a significant linear relationship with hope and mental health.

  7. Energy Return on Investment from Recycling Nuclear Fuel

    International Nuclear Information System (INIS)

    2011-01-01

    This report presents an evaluation of the Energy Return on Investment (EROI) from recycling an initial batch of 800 t/y of used nuclear fuel (UNF) through a Recycle Center under a number of different fuel cycle scenarios. The study assumed that apart from the original 800 t of UNF only depleted uranium was available as a feed. Therefore for each subsequent scenario only fuel that was derived from the previous fuel cycle scenario was considered. The scenarios represent a good cross section of the options available and the results contained in this paper and associated appendices will allow for other fuel cycle options to be considered.

  8. Open-loop recycling: A LCA case study of PET bottle-to-fibre-recycling

    NARCIS (Netherlands)

    Shen, L.; Worrell, E.; Patel, M.K.

    2010-01-01

    This study assesses the environmental impact of polyethylene terephthalate (PET) bottle-to-fibre recycling using the methodology of life-cycle assessment (LCA). Four recycling cases, including mechanical recycling, semi-mechanical recycling, back-to-oligomer recycling and back-to-monomer recycling

  9. Hope in newly diagnosed cancer patients.

    Science.gov (United States)

    Duggleby, Wendy; Ghosh, Sunita; Cooper, Dan; Dwernychuk, Lynne

    2013-11-01

    Hope is important to cancer patients as it helps them deal with their diagnosis. Little is known about hope in newly diagnosed cancer patients. Based on the Transcending Possibilities conceptual model of hope, the purpose of this study was to examine the relationship of hope with pain, energy, and psychological and demographic characteristics in newly diagnosed adult oncology outpatients. Data from 310 New Patient Assessment Forms from cancer outpatients' health records were collected. Health records from the first six months of 2009 were reviewed and data were collected on hope, energy, pain, depression, anxiety, feeling overwhelmed, and demographic variables. A generalized linear modeling approach was used to study the relationship of hope scores with these variables. Hypothesized variables and variables that were significant at the P = 0.01 level from the univariate analysis were entered into the multivariate model, with hope scores as the dependent variable. Hope scores were significantly negatively related to age (P = 0.02). More specifically, oncology patients who were 65 years of age or older had significantly less hope than those under the age of 65 years (P = 0.01). Gender (P = 0.009) also was a significant factor, with men having higher hope scores than women. No other variables were significant. Older adults comprise the majority of persons in Canada with cancer. The lower hope scores found in this age group compared with their younger counterparts underscore the importance of further research. This study provides a foundation for future research in this important area for oncology patients. Copyright © 2013 U.S. Cancer Pain Relief Committee. Published by Elsevier Inc. All rights reserved.

  10. 24 CFR 971.11 - HOPE VI developments.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false HOPE VI developments. 971.11... § 971.11 HOPE VI developments. Developments with HOPE VI implementation grants that have approved HOPE... with reasonable revitalization plans. Future HUD actions to approve or deny proposed HOPE VI...

  11. Hope dies last … A qualitative study into the meaning of hope for people with cancer in the palliative phase.

    Science.gov (United States)

    Nierop-van Baalen, C; Grypdonck, M; van Hecke, A; Verhaeghe, S

    2016-07-01

    Palliative patients may have strong hope, even hope for a cure, despite knowing their prognosis. Health professionals do not always understand patients who have this kind of hope. The aim of this article was to explore the meaning of hope among patients with cancer in the palliative phase. A secondary analysis was conducted including a constant comparative analysis to uncover the processes underlying the maintenance of hope, of previously collected interview data (n = 76). The meaning of hope is related to the importance of the object it is attached to, rather than to a real chance of achieving this object. Hope has a dual function: patients hope because they cannot forsake it and because they benefit so much from it. Hope can spring from many sources and is influenced by various factors. If there are fewer potent sources to tap into, people create hope themselves and this type of self-created hope takes more effort to maintain. Patients use different strategies to increase their hope, described as the 'the work of hope'. A better understanding of the work of hope can lead to better psychosocial support by health professionals. Health professionals convey many messages that affect the work of hope. © 2016 John Wiley & Sons Ltd.

  12. Hopes, Fears, & Reality: A Balanced Look at American Charter Schools in 2006

    Science.gov (United States)

    Lake, Robin J., Ed.; Hill, Paul T., Ed.

    2006-01-01

    This is the second annual report from the National Charter School Research Project (NCSRP) at the University of Washington's Center on Reinventing Public Education. Like last year's debut edition of Hopes, Fears, & Reality, the 2006 volume explores some of the most current and controversial issues facing the charter school movement. This…

  13. A partnership in like-minded thinking-generating hopefulness in persons with cancer.

    Science.gov (United States)

    Ayers, Tressie A Dutchyn

    2007-03-01

    A conceptual model of a partnership in 'like-minded thinking' consists of the following components: a relationship, a shared goal with mutual agreement to work toward that goal, and reciprocal encouragement between two people. A like-minded alliance is a relationship that offers support while at the same time encourages hope and establishes a reciprocating emotional attitude of hopefulness. The discussion focuses on the principles of such a model that is designed primarily as a lay intervention for anyone who has a close friend with cancer and who wants to assist the friend in maintaining a hopeful attitude in the face of illness. While this model is not directed at healthcare professionals it may be transferable into psychosocial interventions to assist persons toward sustaining hopefulness in the context of the cancer trajectory. Much has been written in the literature about how hopelessness spawns despair for individuals who have cancer and in those near the end of life; it may even create a desire for hastened death (Breitbart W., Heller K.S.: 2003, 'Reframing Hope: Meaning-Centered Care for Patients Near the End of Life'. Journal of Palliative Medicine 6, 979-988; Jones J.M., Huggins M.A., Rydall A.C., Rodin G.M.: 2003, 'Symptomatic distress, hopelessness, and the desire for hastened death in hospitalized cancer patients', Journal of Psychosomatic Research 55, 411-418). Therefore, the aim of this paper is to explore how like-minded thinking for a person with cancer and his or her support person provides a framework for a personal shared worldview that is hope-based, meaningful and coherent.

  14. Behaviour of Recycled Coarse Aggregate Concrete: Age and Successive Recycling

    Science.gov (United States)

    Sahoo, Kirtikanta; Pathappilly, Robin Davis; Sarkar, Pradip

    2016-06-01

    Recycled Coarse Aggregate (RCA) concrete construction technique can be called as `green concrete', as it minimizes the environmental hazard of the concrete waste disposal. Indian standard recommends target mean compressive strength of the conventional concrete in terms of water cement ratio ( w/ c). The present work is an attempt to study the behaviour of RCA concrete from two samples of parent concrete having different age group with regard to the relationship of compressive strength with water cement ratios. Number of recycling may influence the mechanical properties of RCA concrete. The influence of age and successive recycling on the properties such as capillary water absorption, drying shrinkage strain, air content, flexural strength and tensile splitting strength of the RCA concrete are examined. The relationship between compressive strength at different w/ c ratios obtained experimentally is investigated for the two parameters such as age of parent concrete and successive recycling. The recycled concrete using older recycled aggregate shows poor quality. While the compressive strength reduces with successive recycling gradually, the capillary water absorption increases abruptly, which leads to the conclusion that further recycling may not be advisable.

  15. The recycling of wastes in Japan; Le recyclage des dechets au Japon

    Energy Technology Data Exchange (ETDEWEB)

    Georgel, O.

    2004-04-01

    The Japan economic growth of the second half of the 20. century and the increase of the internal consumption, led to the continuous increase of the wastes volume. The government took into account this problem only during the years 1990 because of the landfills saturation, and decided large legislative measures. Hopeful the japanese industry voluntarism, results have reach beyond the limits and rate fixed by the law. After a presentation of the wastes recycling policy in Japan, this report described the new techniques applied and the tendencies in the research development. Then the treatment of specific products are presented. (A.L.B.)

  16. Association of Sociodemographic Factors with Spirituality and Hope in Patients with Diabetic Foot Ulcers.

    Science.gov (United States)

    Salomé, Geraldo Magela; de Almeida, Sergio Aguinaldo; Mendes, Bruno; de Carvalho, Maiume Roana Ferreira; Bueno, José Carlos; Massahud, Marcelo Renato; Ferreira, Lydia Masako

    2017-01-01

    To evaluate levels of spirituality and hope in patients with diabetic foot ulcers (DFUs) according to sociodemographic factors. This was a primary, prospective, descriptive, analytical, and clinical study. Questionnaires assessing sociodemographic and clinical characteristics of the patients, the Spirituality Self-rating Scale (SSRS), and the Herth Hope Index (HHI) were administered to all participants. University-affiliated skilled nursing center and outpatient wound care clinic in Pouso Alegre, Brazil. Fifty adult patients with DFUs participated in the study. Patients with ischemic diabetic foot and mixed ulcers were excluded from the study. On average, patients with DFUs had low levels of spirituality (mean SSRS score, 12.6) and low hope for cure (mean HHI, 16.5). Patients younger than 60 years reported significantly lower levels of spirituality (mean SSRS scores, 11.0), and those older than 70 years had significantly lower hope for cure (mean HHI, 12.5) than other age groups (P = .040). Level of spirituality was significantly lower among women (P = .015) and those living with an ulcer for more than 2 years, who also reported significantly lower hope for cure (P = .029) compared with patients having an ulcer for less than 2 years. On average, patients with DFUs, especially women and older adults, had a low sense of hope and spirituality. Except for gender, age, and ulcer duration, other sociodemographic and ulcer characteristics had no significant effect on the study population's spirituality and hope.

  17. Until the last breath: exploring the concept of hope for parents and health care professionals during a child's serious illness.

    Science.gov (United States)

    Reder, Elizabeth A Keene; Serwint, Janet R

    2009-07-01

    To investigate the concept of hope for families and pediatric health care professionals during a child's serious illness. Eight focus groups. Academic pediatric medical center. Bereaved parents, pediatricians, pediatric residents, and nurses (N = 39). Intervention Participants were asked standardized questions related to their definition of hope, its role in medical decisions, and the benefits and detriments of hope in focus group sessions. We identified attributes of participants' concepts of hope using qualitative analysis of audio-taped sessions. While all participants identified common elements in their definition of hope, parents identified their role as bearers of hope; it was a cornerstone of decision making. Health care professionals tended to view hope as related to a positive outcome. Some physicians reported difficulty in maintaining hope in the face of prognostic data; others acknowledged the importance of the family's hope. Nurses identified particular challenges around parents' decisions to continue treatment when it prolonged the child's suffering. All participants noted the changing nature of hope and its implications for care. The tension between maintaining hope and accepting the reality of the prognosis may lessen when acknowledging that parents see their role as bearers of hope. Supporting families around the changing nature of hope may allow health care professionals to partner with parents while maintaining honest communication.

  18. Compositional data analysis of household waste recycling centres in Denmark

    DEFF Research Database (Denmark)

    Edjabou, Maklawe Essonanawe; Martín-Fernández, J. A.; Boldrin, Alessio

    of these projects on the recycling rates does not exist. Thus, compositional data analysis technique was applied to analyze consistently waste data. Based on the waste composition obtained from a recycling center in Denmark, we analyzed the composition of waste treatment and disposal options. Zero and non......-zero pattern was used to describe historical changes in the definition and components of waste fractions. Variation array was applied to determine the relationship between waste treatment and disposal options. As a result, compositional data analysis technique enables to analyze waste data regardless...

  19. Regular Recycling of Wood Ash to Prevent Waste Production (RecAsh). Technical Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Lars E-mail: lars.t.andersson@skogsstyreslen.se

    2007-03-15

    At present, the extraction of harvest residues is predicted to increase in Sweden and Finland. As an effect of the intensified harvesting, the export of nutrients and acid buffering substances from the growth site is also increased. Wood ash could be used to compensate forest soils for such losses. Most wood fuel ash is today often deposited in landfills. If the wood ash is recycled, wood energy is produced without any significant waste production. Ash recycling would therefore contribute to decreasing the production of waste, and to maintaining the chemical quality of forest waters and biological productivity of forest soils in the long term. The project has developed, analysed and demonstrated two regular ash-recycling systems. It has also distributed knowledge gathered about motives for ash recycling as well as technical and administrative solutions through a range of media (handbooks, workshops, field demonstrations, reports, web page and information videos). Hopefully, the project will contribute to decreasing waste problems related to bio-energy production in the EU at large. The project has been organised as a separate structure at the beneficiary and divided in four geographically defined subprojects, one in Finland and three in Sweden (Central Sweden, Northern Sweden, and South-western Sweden). The work in each subproject has been lead by a subproject leader. Each subproject has organised a regional reference group. A project steering committee has been established consisting of senior officials from all concerned partners. The project had nine main tasks with the following main expected deliverables and output: 1. Development of two complete full-scale ash-recycling systems; 2. Production of handbooks of the ash recycling system; 3. Ash classification study to support national actions for recommendations; 4. Organise regional demonstrations of various technical options for ash treatment and spreading; 5. Organise national seminars and demonstrations of

  20. The relationship between body esteem and hope and mental health in breast cancer patients after mastectomy

    Directory of Open Access Journals (Sweden)

    Mohammad Heidari

    2015-01-01

    Full Text Available Background: Breast cancer and its treatment, including mastectomy, can cause feelings of mutilation, depreciation in the value of the body, reduction in attractiveness, and lead to mental disorders and hopelessness. Objective: The present study aimed to determine the relationship between appreciating the body, hope and mental health in women with breast cancer after mastectomy. Materials and Methods: This study was a descriptive study of 100 breast cancer patients who had undergone mastectomy and referred to the Sayed Al-Shohada Medical Center in Isfahan, Iran. The subjects were selected by convenient sampling. Data gathering tools were the Body Esteem Scale (BES, Herth Hope Index (HHI, and Symptom Checklist 25 (SCL-25 mental health questionnaire. Data analysis was performed using SPSS software. Results: Most of the patients had low body esteem. There was a significant direct linear relationship between body esteem and hope and mental health. This relationship was stronger between valuing the body and hope. Conclusion: Body esteem has a significant linear relationship with hope and mental health.

  1. The Relationship between Body Esteem and Hope and Mental Health in Breast Cancer Patients after Mastectomy

    Science.gov (United States)

    Heidari, Mohammad; Ghodusi, Mansureh

    2015-01-01

    Background: Breast cancer and its treatment, including mastectomy, can cause feelings of mutilation, depreciation in the value of the body, reduction in attractiveness, and lead to mental disorders and hopelessness. Objective: The present study aimed to determine the relationship between appreciating the body, hope and mental health in women with breast cancer after mastectomy. Materials and Methods: This study was a descriptive study of 100 breast cancer patients who had undergone mastectomy and referred to the Sayed Al-Shohada Medical Center in Isfahan, Iran. The subjects were selected by convenient sampling. Data gathering tools were the Body Esteem Scale (BES), Herth Hope Index (HHI), and Symptom Checklist 25 (SCL-25) mental health questionnaire. Data analysis was performed using SPSS software. Results: Most of the patients had low body esteem. There was a significant direct linear relationship between body esteem and hope and mental health. This relationship was stronger between valuing the body and hope. Conclusion: Body esteem has a significant linear relationship with hope and mental health. PMID:26009674

  2. 24 CFR 572.1 - Overview of HOPE 3.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false Overview of HOPE 3. 572.1 Section... DEVELOPMENT COMMUNITY FACILITIES HOPE FOR HOMEOWNERSHIP OF SINGLE FAMILY HOMES PROGRAM (HOPE 3) General § 572.1 Overview of HOPE 3. The purpose of the HOPE for Homeownership of Single Family Homes program (HOPE...

  3. Role of hope in academic and sport achievement.

    Science.gov (United States)

    Curry, L A; Snyder, C R; Cook, D L; Ruby, B C; Rehm, M

    1997-12-01

    Hope is the sum of goal thoughts as tapped by pathways and agency. Pathways reflect the perceived capability to produce goal routes; agency reflects the perception that one can initiate action along these pathways. Using trait and state hope scales, studies explored hope in college student athletes. In Study 1, male and female athletes were higher in trait hope than nonathletes; moreover, hope significantly predicted semester grade averages beyond cumulative grade point average and overall self-worth. In Study 2, with female cross-country athletes, trait hope predicted athletic outcomes; further, weekly state hope tended to predict athletic outcomes beyond dispositional hope, training, and self-esteem, confidence, and mood. In Study 3, with female track athletes, dispositional hope significantly predicted athletic outcomes beyond variance related to athletic abilities and affectivity; moreover, athletes had higher hope than nonathletes.

  4. Holding on to hope: A review of the literature exploring missing persons, hope and ambiguous loss.

    Science.gov (United States)

    Wayland, Sarah; Maple, Myfanwy; McKay, Kathy; Glassock, Geoffrey

    2016-01-01

    When a person goes missing, those left behind mourn an ambiguous loss where grief can be disenfranchised. Different to bereavement following death, hope figures into this experience as a missing person has the potential to return. This review explores hope for families of missing people. Lived experience of ambiguous loss was deconstructed to reveal responses punctuated by hope, which had practical and psychological implications for those learning to live with an unresolved absence. Future lines of enquiry must address the dearth of research exploring the role of hope, unresolved grief, and its clinical implications when a person is missing.

  5. Design study on advanced nuclear fuel recycling system by pyrometallurgical reprocessing technology

    Energy Technology Data Exchange (ETDEWEB)

    Kasai, Yoshimitsu; Kakehi, Isao; Moro, Satoshi; Tobe, Kenji; Kawamura, Fumio; Higashi, Tatsuhiro; Yonezawa, Shigeaki [Japan Nuclear Cycle Development Inst., Oarai, Ibaraki (Japan). Oarai Engineering Center; Yoshiuji, Takahiro

    1998-12-01

    The Japan Nuclear Fuel Cycle Development Institute is conducting research and development on the nuclear fuel recycling system, which will improve the economy, safety, and environmental impact of the nuclear fuel recycling system in the age of the FBR. The System Engineering Division in the O-arai Engineering Center has conducted a design study on an advanced nuclear fuel recycling system for FBRs by using pyrometallurgical reprocessing technology. The system is an economical and compact module-type system, and can be used for reprocessing oxide fuel and also new types of fuel (metal fuel and nitride fuel). This report describes the concept of this system and results of the design study. (author)

  6. Design study on advanced nuclear fuel recycling system by pyrometallurgical reprocessing technology

    International Nuclear Information System (INIS)

    Kasai, Yoshimitsu; Kakehi, Isao; Moro, Satoshi; Tobe, Kenji; Kawamura, Fumio; Higashi, Tatsuhiro; Yonezawa, Shigeaki; Yoshiuji, Takahiro

    1998-01-01

    The Japan Nuclear Fuel Cycle Development Institute is conducting research and development on the nuclear fuel recycling system, which will improve the economy, safety, and environmental impact of the nuclear fuel recycling system in the age of the FBR. The System Engineering Division in the O-arai Engineering Center has conducted a design study on an advanced nuclear fuel recycling system for FBRs by using pyrometallurgical reprocessing technology. The system is an economical and compact module-type system, and can be used for reprocessing oxide fuel and also new types of fuel (metal fuel and nitride fuel). This report describes the concept of this system and results of the design study. (author)

  7. Fostering hope in the patient with cancer.

    Science.gov (United States)

    Lichwala, Rebecca

    2014-06-01

    When a patient is diagnosed with cancer, feelings such as fear, anxiety, and hopelessness can negatively affect a person's frame of mind. Hope can help a patient decrease anxiety and increase quality of life. Nurses should assess hope, provide interventions, be empathetic, listen, and treat patients with dignity to help improve hope and quality of life. This article features how hope can have a positive impact and provides specific information about how nurses can promote and foster hope in patients with cancer.

  8. Fission reactor recycling pump handling device

    International Nuclear Information System (INIS)

    Togasawa, Hiroshi; Komita, Hideo; Susuki, Shoji; Endo, Takio; Yamamoto, Tetsuzo; Takahashi, Hideaki; Saito, Noboru.

    1991-01-01

    This invention provides a device for handling a recycling pump in a nuclear reactor upon periodical inspections in a BWR type power plant. That is, in a handling device comprising a support for supporting components of a recycling pump, and a lifter for vertically moving the support below a motor case disposed passing through a reactor pressure vessel, a weight is disposed below the support. Then, the center of gravity of the components, the support and the entire weight is substantially aligned with the position for the support. With such a constitution, the components can be moved vertically to the motor case extremely safely, to remarkably suppress vibrations. Further, the operation safety can remarkably be improved by preventing turning down upon occurrence of earthquakes. Further, since vibration-proof jigs as in a prior art can be saved, operation efficiency can be improved. (I.S.)

  9. Fission reactor recycling pump handling device

    Energy Technology Data Exchange (ETDEWEB)

    Togasawa, Hiroshi; Komita, Hideo; Susuki, Shoji; Endo, Takio; Yamamoto, Tetsuzo; Takahashi, Hideaki; Saito, Noboru

    1991-06-24

    This invention provides a device for handling a recycling pump in a nuclear reactor upon periodical inspections in a BWR type power plant. That is, in a handling device comprising a support for supporting components of a recycling pump, and a lifter for vertically moving the support below a motor case disposed passing through a reactor pressure vessel, a weight is disposed below the support. Then, the center of gravity of the components, the support and the entire weight is substantially aligned with the position for the support. With such a constitution, the components can be moved vertically to the motor case extremely safely, to remarkably suppress vibrations. Further, the operation safety can remarkably be improved by preventing turning down upon occurrence of earthquakes. Further, since vibration-proof jigs as in a prior art can be saved, operation efficiency can be improved. (I.S.).

  10. Benefit/cost analysis of plutonium recycle options in the United States

    International Nuclear Information System (INIS)

    Lowenberg, H.; Burnham, J.B.; Fisher, F.; Ray, W.H.

    1977-01-01

    Predictable effects of the recycle of plutonium and uranium recovered from spent LWR fuels were assessed in a final environmental statement (GESMO). Five alternative dispositions of LWR-produced plutonium ranging from prompt recycle of recovered plutonium and uranium to no recovery and no recycle are compared. The assessments consider cumulative effects for the period 1975 through 2000, and are centered on a conservative low growth rate resulting in about 500 LWR's in the U.S. in 2000. A more optimistic growth projection resulting in about 800 LWR's in 2000 is also analyzed in order to assess the effects of industry size upon the impacts. Demands for fuel cycle services were calculated with an ERDA program, NUFUEL, which was modified to include penalties for 236 U and 242 Pu. Unit cost data, including a simulation of market place reaction to supply-demand functions for uranium costs, were combined with the NUFUEL demand data in an economics code, NUCOST. Environmental impacts were also based upon NUFUEL demand data and were developed using a model plant industry concept. Using the most likely unit costs with a 10% discount rate, present worth incentives for prompt recycle over no recycle of $3.2 billion for the lower growth and about $6 billion for the higher growth were indicated. Present worth costs of delays in recycle of up to 5 years were less than $1 billion. Sensitivity of the economic assessments to unit cost variations and discount rates were also evaluated. Environmental impacts other than radiological were lowest for prompt Pu recycle and highest for no recycle. Radiological impacts for the total world wide total body exposure from U.S. industry for the 26 year period were estimated to be: - No recycle-8.2 million person-rem; U only recycle-9.5 million person-rem; Pu and U recycle-8.8 million person-rem. Comparison of the decreased radiological impact of the no recycle option with its increased costs relative to prompt plutonium recycle resulted in a

  11. Between hope and hopelessness

    DEFF Research Database (Denmark)

    Andersen, Ingrid Charlotte; Thomsen, Thora Grothe; Bruun, Poul

    2018-01-01

    and seven family members during follow-up visits at hospital and at the participants' homes between 2014 and 2016. A phenomenological-hermeneutical approach was used to interpret the data. RESULTS: 'Between hope and hopelessness' involved frustrations, concerns and doubts, all of which could relate...... to the interaction with healthcare providers. 'Seeking support from healthcare services', 'navigating between healthcare providers' and 'collaborating with healthcare providers at home' could entail opportunities to strengthen self-management and hope; however, it could also entail reduced faith in getting the right...... help and hopelessness. CONCLUSION: During a period of transition after hospitalisation, available and well-coordinated healthcare services, and alliances with healthcare professionals are crucial to COPD patients and their family members in terms of their self-management, hope and well-being....

  12. COPPER CABLE RECYCLING TECHNOLOGY

    International Nuclear Information System (INIS)

    Chelsea Hubbard

    2001-01-01

    The United States Department of Energy (DOE) continually seeks safer and more cost-effective technologies for use in deactivation and decommissioning (D and D) of nuclear facilities. The Deactivation and Decommissioning Focus Area (DDFA) of the DOE's Office of Science and Technology (OST) sponsors large-scale demonstration and deployment projects (LSDDPs). At these LSDDPs, developers and vendors of improved or innovative technologies showcase products that are potentially beneficial to the DOE's projects and to others in the D and D community. Benefits sought include decreased health and safety risks to personnel and the environment, increased productivity, and decreased costs of operation. The Idaho National Engineering and Environmental Laboratory (INEEL) generated a list of statements defining specific needs and problems where improved technology could be incorporated into ongoing D and D tasks. One such need is to reduce the volume of waste copper wire and cable generated by D and D. Deactivation and decommissioning activities of nuclear facilities generates hundreds of tons of contaminated copper cable, which are sent to radioactive waste disposal sites. The Copper Cable Recycling Technology separates the clean copper from contaminated insulation and dust materials in these cables. The recovered copper can then be reclaimed and, more importantly, landfill disposal volumes can be reduced. The existing baseline technology for disposing radioactively contaminated cables is to package the cables in wooden storage boxes and dispose of the cables in radioactive waste disposal sites. The Copper Cable Recycling Technology is applicable to facility decommissioning projects at many Department of Energy (DOE) nuclear facilities and commercial nuclear power plants undergoing decommissioning activities. The INEEL Copper Cable Recycling Technology Demonstration investigated the effectiveness and efficiency to recycle 13.5 tons of copper cable. To determine the effectiveness

  13. Rethink, Rework, Recycle.

    Science.gov (United States)

    Wrhen, Linda; DiSpezio, Michael A.

    1991-01-01

    Information about the recycling and reuse of plastics, aluminum, steel, glass, and newspapers is presented. The phases of recycling are described. An activity that allows students to separate recyclable materials is included. The objectives, a list of needed materials, and procedure are provided. (KR)

  14. Recycling at Penn State's Beaver Stadium. "Recycle on the Go" Success Story

    Science.gov (United States)

    US Environmental Protection Agency, 2009

    2009-01-01

    With a 13-year-old recycling program, The Pennsylvania State University's (Penn State) Beaver Stadium in the past diverted nearly 30 tons of recyclables per year from local landfills. A new initiative to promote recycling in the stadium's tailgating area has helped Penn State more than triple its old recycling record, collecting 112 tons in 2008.…

  15. Recycling of electronic scrap

    DEFF Research Database (Denmark)

    Legarth, Jens Brøbech

    This Ph.D. thesis deals with the growingly important field of electronics recycling with special attention to the problem of printed circuit board recycling. A literature survey of contemporary electronics recycling and printed circuit board recycling is presented.Further, an analysis of the role...

  16. Sisters Hope - the exposed self

    DEFF Research Database (Denmark)

    Lawaetz, Anna; Hallberg, Gry Worre

    Sisters Hope is an art-educational method and a practice-led research tool, rooted in the construction of a fictional parallel universe revolving around the twin sisters Coco and Coca Pebber. Our work is rooted in the ambition to democratize the aesthetic dimension through ‘affective engineering......’ and the establishment of fictional spaces outside the institutional art context. In the Unfolding Academia-context Sisters Hope investigates new forms of research and (re)presentation through the creation of interactive and affective learning-spaces. At Collective Futures Sisters Hope explored questions such as: How...

  17. DEVELOPMENT OF IN-PLACE DENSITY METHOD FOR COLD IN-PLACE RECYCLING

    Science.gov (United States)

    2018-01-01

    This report presents the results of a research study funded by the Nevada DOT and the SOLARIS University Transportation Center. The research developed a method for measuring the in-place density of the cold in-place recycled (CIR) layer immediately a...

  18. Modelling Recycling Targets

    DEFF Research Database (Denmark)

    hill, amanda; Leinikka Dall, Ole; Andersen, Frits Møller

    2014-01-01

    % for household waste, and sets an ambitious goal of a 50% recycling rate by 2020. This study integrates the recycling target into the FRIDA model to project how much waste and from which streams should be diverted from incineration to recycling in order to achieve the target. Furthermore, it discusses how...

  19. Concrete produced with recycled aggregates

    Directory of Open Access Journals (Sweden)

    J. J. L. Tenório

    Full Text Available This paper presents the analysis of the mechanical and durable properties of recycled aggregate concrete (RAC for using in concrete. The porosity of recycled coarse aggregates is known to influence the fresh and hardened concrete properties and these properties are related to the specific mass of the recycled coarse aggregates, which directly influences the mechanical properties of the concrete. The recycled aggregates were obtained from construction and demolition wastes (CDW, which were divided into recycled sand (fine and coarse aggregates. Besides this, a recycled coarse aggregate of a specific mass with a greater density was obtained by mixing the recycled aggregates of the CDW with the recycled aggregates of concrete wastes (CW. The concrete was produced in laboratory by combining three water-cement ratios, the ratios were used in agreement with NBR 6118 for structural concretes, with each recycled coarse aggregates and recycled sand or river sand, and the reference concrete was produced with natural aggregates. It was observed that recycled aggregates can be used in concrete with properties for structural concrete. In general, the use of recycled coarse aggregate in combination with recycled sand did not provide good results; but when the less porous was used, or the recycled coarse aggregate of a specific mass with a greater density, the properties of the concrete showed better results. Some RAC reached bigger strengths than the reference concrete.

  20. Improving communication on hope in palliative care. A qualitative study of palliative care professionals' metaphors of hope: grip, source, tune, and vision

    NARCIS (Netherlands)

    Olsman, Erik; Duggleby, Wendy; Nekolaichuk, Cheryl; Willems, Dick; Gagnon, Judith; Kruizinga, Renske; Leget, Carlo

    2014-01-01

    Hope is important in palliative care. However, palliative care professionals' perspectives on hope are not well understood. Metaphors of hope are a way of better understanding these perspectives. To describe palliative care professionals' perspectives on hope by examining the hope metaphors they

  1. Japanese status-quo and our activities in the field of nuclear fuel recycle

    International Nuclear Information System (INIS)

    Sada, Masao; Imai, Osamu

    1983-01-01

    Nuclear energy is expected to take the place of current petroleum-base-energy in the near future. In order to effectively utilize the nuclear energy, nuclear fuel recycle system has to be established. The technology for reprocessing the spent fuel, which is a part of this recycle system, is very similar to the ones in chemical industry. Our company has been keeping its eyes on the field of such nuclear energy as one of the future promising businesses and recentrly established Nuclear Energy Department as a center for further expanding the business opportunity in the field of such spent fuel reprocessing as well as other fields of nuclear fuel recycle system. (author)

  2. New Hope for Stopping HIV - Testing and Medical Care Save Lives PSA (:60)

    Centers for Disease Control (CDC) Podcasts

    2011-11-29

    This 60 second PSA is based on the December 2011 CDC Vital Signs report, "HIV Prevention through Care and Treatment" that shares new hope for preventing HIV and improving the health of people with HIV.  Created: 11/29/2011 by Centers for Disease Control and Prevention (CDC).   Date Released: 11/29/2011.

  3. HOPEFULNESS IN HOPELESSNESS: A HERMENEUTICAL ...

    African Journals Online (AJOL)

    Dean SPGS NAU

    time at Auschwitz that people who lost all hope were the first to die. He writes: ... The future was to be one of happiness to which all men are ... The OT's hope falls short with death. .... Going back in our memory lane, one remembers when.

  4. Modes of hoping: understanding hope and expectation in the context of a clinical trial of complementary and alternative medicine for chronic pain.

    Science.gov (United States)

    Eaves, Emery R; Ritenbaugh, Cheryl; Nichter, Mark; Hopkins, Allison L; Sherman, Karen J

    2014-01-01

    This article explores the role of hope in participants' assessments of their expectations, experiences and treatment outcomes. Data analysis focused on semi-structured, open-ended interviews with 44 participants, interviewed 3-5 times each over the course of a study evaluating Traditional Chinese Medicine (TCM) for temporomandibular disorders (TMD), a form of chronic orofacial pain. Transcripts were coded and analyzed using qualitative and ethnographic methods. A "Modes of Hoping" (Webb, 2007)(1) framework informed our analysis. Five modes of hoping emerged from participant narratives: Realistic Hope, Wishful Hope, Utopian Hope, Technoscience Hope, and Transcendent Hope. Using this framework, hope is demonstrated as exerting a profound influence over how participants assess and report their expectations. This suggests that researchers interested in measuring expectations and understanding their role in treatment outcomes should consider hope as exercising a multi-faceted and dynamic influence on participants' reporting of expectations and their experience and evaluation of treatment. Copyright © 2014 Elsevier Inc. All rights reserved.

  5. Nuclear fuel cycle waste recycling technology deverlopment - Radioactive metal waste recycling technology development

    International Nuclear Information System (INIS)

    Oh, Won Zin; Moon, Jei Kwon; Jung, Chong Hun; Park, Sang Yoon

    1998-08-01

    With relation to recycling of the radioactive metal wastes which are generated during operation and decommissioning of nuclear facilities, the following were described in this report. 1. Analysis of the state of the art on the radioactive metal waste recycling technologies. 2. Economical assessment on the radioactive metal waste recycling. 3. Process development for radioactive metal waste recycling, A. Decontamination technologies for radioactive metal waste recycling. B. Decontamination waste treatment technologies, C. Residual radioactivity evaluation technologies. (author). 238 refs., 60 tabs., 79 figs

  6. Cura animarum as hope care: Towards a theology of the resurrection within the human quest for meaning and hope

    Directory of Open Access Journals (Sweden)

    Daniel J. Louw

    2014-04-01

    Full Text Available The following critical questions are posed: is hope the antidote of dread and despair or a kind of escapism from the harsh realities of anguish and suffering? What is meant by hope in Christian spirituality and how is hope connected to a theology of the resurrection? Is resurrection hope merely a kind of cheap triumphantalism and variant of a theologia gloriae? The basic assumption is that the notion of the resurrection can contribute to ‘the thickening of alternative stories of faith’. A theologia resurrectionis is about the reframing of life by means of a radical paradox: ‘Where, O death is your victory? Where, O death is your sting?’ If pastoral caregiving is indeed about change and hope, the resurrection describes an ontology of hope by which human beings are transformed into a total new being. Beyond the discriminating and stigmatising categories of many social and cultural discourses on our being human, resurrection theology defines hope as a new state of mind and being. The identity of human beings is therefore not determined by descent, gender, race or social status, but by eschatology (new creation. Hope care is primarily about a new courage to be. It opens up different frameworks for meaningful living within the realm of human suffering.

  7. The fast-recycling receptor Megalin defines the apical recycling pathway of epithelial cells

    Science.gov (United States)

    Perez Bay, Andres E.; Schreiner, Ryan; Benedicto, Ignacio; Paz Marzolo, Maria; Banfelder, Jason; Weinstein, Alan M.; Rodriguez-Boulan, Enrique J.

    2016-01-01

    The basolateral recycling and transcytotic pathways of epithelial cells were previously defined using markers such as transferrin (TfR) and polymeric IgA (pIgR) receptors. In contrast, our knowledge of the apical recycling pathway remains fragmentary. Here we utilize quantitative live-imaging and mathematical modelling to outline the recycling pathway of Megalin (LRP-2), an apical receptor with key developmental and renal functions, in MDCK cells. We show that, like TfR, Megalin is a long-lived and fast-recycling receptor. Megalin enters polarized MDCK cells through segregated apical sorting endosomes and subsequently intersects the TfR and pIgR pathways at a perinuclear Rab11-negative compartment termed common recycling endosomes (CRE). Whereas TfR recycles to the basolateral membrane from CRE, Megalin, like pIgR, traffics to subapical Rab11-positive apical recycling endosomes (ARE) and reaches the apical membrane in a microtubule- and Rab11-dependent manner. Hence, Megalin defines the apical recycling pathway of epithelia, with CRE as its apical sorting station. PMID:27180806

  8. Measuring hope among families impacted by cognitive impairment.

    Science.gov (United States)

    Hunsaker, Amanda E; Terhorst, Lauren; Gentry, Amanda; Lingler, Jennifer H

    2016-07-01

    The current exploratory investigation aims to establish the reliability and validity of a hope measure, the Herth Hope Index, among families impacted by early cognitive impairment (N = 96). Exploratory factor analysis was used to examine the dimensionality of the measure. Bivariate analyses were used to examine construct validity. The sample had moderately high hope scores. A two-factor structure emerged from the factor analysis, explaining 51.44% of the variance. Both factors exhibited strong internal consistency (Cronbach's alphas ranged from .83 to .86). Satisfaction with social support was positively associated with hope, supporting convergent validity. Neurocognitive status, illness insight, and depression were not associated with hope, indicating discriminant validity. Families impacted by cognitive impairment may maintain hope in the face of a potentially progressive illness, regardless of cognitive status. The Herth Hope Index can be utilized as a reliable and valid measure of hope by practitioners providing support to families impacted by cognitive impairment. © The Author(s) 2014.

  9. Usage of Recycled Pet

    Directory of Open Access Journals (Sweden)

    A. Ebru Tayyar

    2010-01-01

    Full Text Available The increasing industrialization, urbanization and the technological development have caused to increase depletion of the natural resources and environmental pollution's problem. Especially, for the countries which have not enough space recycling of the waste eliminating waste on regular basis or decreasing the amount and volume of waste have provided the important advantages. There are lots of studies and projects to develop both protect resources and prevent environmental pollution. PET bottles are commonly used in beverage industry and can be reused after physical and chemical recycling processes. Usage areas of recycled PET have been developed rapidly. Although recycled PET is used in plastic industry, composite industry also provides usage alternatives of recycled PET. Textile is a suitable sector for recycling of some plastics made of polymers too. In this study, the recycling technologies and applications of waste PET bottles have been investigated and scientific works in this area have been summarized.

  10. The Armour of Hope and other works

    Directory of Open Access Journals (Sweden)

    Kate Just

    2013-01-01

    Full Text Available The series of work entitled 'The Skin of Hope' was produced during a 2012 Australia Council for the Arts studio residency in Barcelona, where I was accompanied by my partner Paula and our adopted daughter, Hope. Blurring the usual divide between familial life and art practice, the residency inspired a series of hand knitted sculptures and photographs weaving an account of the ways that Hope and I acknowledge, bond and imprint each other at skin level. Materialising our past wounds and present, tactile connections, the works include a hanging, child-sized, knitted suit of armour for Hope and a reversible pair of knitted arm-length gloves for me, scar-embroidered with surgical stitches and the words HOPE and MOTHER. Through the slow crafting of the works, and the photographs of us wearing the garments, I reflected on Hope's and my own resilience, repair and capacity to love. In a photographic work featuring Hope's text and drawing of herself on my naked back, I further framed skin as both a receptive and transmissive space, bearing witness to our most intimate moments.

  11. Feeling hopeful inspires support for social change

    NARCIS (Netherlands)

    Greenaway, Katharine H.; Cichocka, Aleksandra; van Veelen, Ruth; Likki, Tiina; Branscombe, Nyla R.

    2014-01-01

    Hope is an emotion that has been implicated in social change efforts, yet little research has examined whether feeling hopeful actually motivates support for social change. Study 1 (N = 274) confirmed that hope is associated with greater support for social change in two countries with different

  12. On the effectiveness of a license scheme for E-waste recycling: The challenge of China and India

    International Nuclear Information System (INIS)

    Shinkuma, Takayoshi; Managi, Shunsuke

    2010-01-01

    It is well known that China and India have been recycling centers of WEEE, especially printed circuit boards, and that serious environmental pollution in these countries has been generated by improper recycling methods. After the governments of China and India banned improper recycling by the informal sector, improper recycling activities spread to other places. Then, these governments changed their policies to one of promoting proper recycling by introducing a scheme, under which E-waste recycling requires a license issued by the government. In this paper, the effectiveness of that license scheme is examined by means of an economic model. It can be shown that the license scheme can work effectively only if disposers of E-waste have a responsibility to sell E-waste to license holders. Our results run counter to the idea that international E-waste trade should be banned and provide an alternative solution to the problem.

  13. HOPE udveksling i Europa

    DEFF Research Database (Denmark)

    Pedersen, Ulla

    1996-01-01

    En artikel om deltagelse i HOPE (Hospital Professional Exchange) - 6 ugers studiebesøg på et hospital i udlandet. Ulla Pedersen fortæller om 6 uger med fokus på rehabilitering i det hollandske sundhedsvæsen.......En artikel om deltagelse i HOPE (Hospital Professional Exchange) - 6 ugers studiebesøg på et hospital i udlandet. Ulla Pedersen fortæller om 6 uger med fokus på rehabilitering i det hollandske sundhedsvæsen....

  14. Assessing changes on poly(ethylene terephthalate) properties after recycling: Mechanical recycling in laboratory versus postconsumer recycled material

    Energy Technology Data Exchange (ETDEWEB)

    López, María del Mar Castro, E-mail: quimcl02@udc.es [Grupo de Polímeros, Centro de Investigacións Tecnológicas (CIT), Departamento de Física, Escuela Universitaria Politécnica, Universidade de A Coruña, Campus de Ferrol, 15403 Ferrol (Spain); Ares Pernas, Ana Isabel, E-mail: aares@udc.es [Grupo de Polímeros, Centro de Investigacións Tecnológicas (CIT), Departamento de Física, Escuela Universitaria Politécnica, Universidade de A Coruña, Campus de Ferrol, 15403 Ferrol (Spain); Abad López, Ma José, E-mail: mjabad@udc.es [Grupo de Polímeros, Centro de Investigacións Tecnológicas (CIT), Departamento de Física, Escuela Universitaria Politécnica, Universidade de A Coruña, Campus de Ferrol, 15403 Ferrol (Spain); and others

    2014-10-15

    Keeping rheological, mechanical and thermal properties of virgin poly(ethylene terephthalate), PET, is necessary to assure the quality of second-market applications. A comparative study of these properties has been undertaken in virgin, mechanical recycled and commercial recycled PET samples. Viscoelastic characterization was carried out by rheological measurements. Mechanical properties were estimated by tensile and Charpy impact strength tests. Thermal properties and crystallinity were evaluated by differential scanning calorimetry and a deconvolution procedure was applied to study the population of the different crystals. Molecular conformational changes related to crystallinity values were studied by FTIR spectroscopy. Variations in average molecular weight were predicted from rheology. Besides, the presence-absence of linear and cyclic oligomeric species was measured by mass spectrometry techniques, as MALDI-TOF. Mechanical recycled PET undergoes a significant decline in rheological, mechanical and thermal properties upon increasing the number of reprocessing steps. This is due to the cleavage of the ester bonds with reduction in molar mass and raise in cyclic oligomeric species, in particular [GT{sub c}]{sub n} and [GT{sub c}]{sub n}-G type. Chain shortening plus enrichment in trans conformers favour the crystallization process which occurs earlier and faster with modification in crystal populations. Additional physicochemical steps are necessary to preserve the main benefits of PET. - Highlights: • Combination of multiple techniques to characterize the effects of recycling in PET. • Cleavage of ester bonds reduced viscosity, Mw, toughness in mechanical recycled PET. • Virgin, mechanical recycled and commercial recycled PET differ in crystal populations. • Cyclic oligomers [GT{sub c}]{sub n} and [GT{sub c}]{sub n}-G increase from the fourth extrusion cycle onwards.

  15. Dual recycling for GEO 600

    International Nuclear Information System (INIS)

    Grote, H; Freise, A; Malec, M; Heinzel, G; Willke, B; Lueck, H; Strain, K A; Hough, J; Danzmann, K

    2004-01-01

    Dual recycling is the combination of signal recycling and power recycling; both optical techniques improve the shot-noise-limited sensitivity of interferometric gravitational-wave detectors. In addition, signal recycling can reduce the loss of light power due to imperfect interference and allows us, in principle, to beat the standard quantum limit. The interferometric gravitational-wave detector GEO 600 is the first of the kilometre-scale detectors to use signal recycling. We have recently equipped the detector with a signal-recycling mirror with a transmittance of 1%. In this paper, we present details of the detector commissioning and the first locks of the dual-recycled interferometer

  16. Recycling Mentors: an intergenerational, service-learning program to promote recycling and environmental awareness.

    Science.gov (United States)

    D'abundo, Michelle L; Fugate-Whitlock, Elizabeth I; Fiala, Kelly A

    2011-01-01

    The purpose of Recycling Mentors was to implement an intergenerational, service-learning program focused on promoting recycling and environmental awareness among students enrolled in Community Health (HEA 301) and Current Issues in Gerontology (GRN 440/540) and adults older than 60 years. Recycling Mentors was conducted in New Hanover County (NHC), North Carolina, where a moderate climate and coastal location attracts many tourists, retirees, and college students. A community like NHC is a good place to implement service-learning that educates both students and older adults about the benefits of recycling to individual health and the environment. During the Fall 2009 semester, undergraduate and graduate students completed institutional review board training and then conducted the program with older adults. The education component of Recycling Mentors included a pre/post survey, brochure, and scheduled visits. Overall, Recycling Mentors was positive service-learning experience with students identifying salient outcomes such as learning about recycling and the environment and working with older adults. In addition, teaching the education component of Recycling Mentors was good practice for students who will be the future health professionals. While service-learning and environmentally themed projects are common, a program that combines the 2 like Recycling Mentors is unique and has the potential to motivate individual change while positively impacting the local community and the environment.

  17. Recycle Alaska: Reduce, Reuse, Recycle. Activities Handbook, Teacher's Guide, and Student Worksheets.

    Science.gov (United States)

    Alaska State Dept. of Education, Juneau.

    Recycling is a very important aspect of conserving the environment for future generations. This guide addresses the topic of litter prevention for the Alaskan environment and contains 42 activities. Activity topics covered include Natural Cycles, Human Interruption of Natural Cycles, Reduce, Reuse, Recycle and Recycled Classroom. Grade level,…

  18. The Diffusion Effect of MSW Recycling

    Directory of Open Access Journals (Sweden)

    Yi-Tui Chen

    2017-12-01

    Full Text Available The purpose of this paper is to compare the recycling performance for some waste fractions selected including food waste, bulk waste, paper, metal products, plastics/rubber and glass products and then to develop some directions for the future improvements. The priority of each waste fraction for recycling is also analyzed by using an importance-performance analysis. Traditionally, the recycling rate that is calculated by the ratio of waste recycled to waste collected is used as an indicator to measure recycling performance. Due to a large variation among waste fractions in municipal solid waste (MSW, the recycling rate cannot reflect the actual recycling performance. The ceiling of recycling rate for each waste fraction estimated from the diffusion models is incorporated into a model to calculate recycling performance. The results show that (1 the diffusion effect exists significantly for the recycling of most recyclables but no evidence is found to support the diffusion effect for the recycling of food waste and bulk waste; (2 the recycling performance of waste metal products ranks the top, compared to waste paper, waste glass and other waste fractions; (3 furthermore, an importance-performance analysis (IPA is employed to analyze the priority of recycling programs and thus this paper suggests that the recycling of food waste should be seen as the most priority item to recycle.

  19. Multiobjective Location Model Design Based on Government Subsidy in the Recycling of CDW

    Directory of Open Access Journals (Sweden)

    Peihua Fu

    2017-01-01

    Full Text Available With the generation of a large amount of construction and demolition waste (CDW, many scholars have recently paid more attention to the recycling of CDW. In this paper, we design a classification recycling method based on the degree of CDW availability in the recycling of CDW. Considering the important role of the government in reverse logistics, a model of reverse logistics network based on the trade-off between cost and recycling rate is put forward, which is subject to government subsidy. The model includes the location of classification processing center and ensures the best route of transportation. Then, the improved particle swarm optimization algorithm is applied to solve the model to get Pareto frontier by transforming it into a multiobjective integer-programming problem. As a case study, the results of the statistical modeling used in this study indicate the feasibility of the model. Finally, according to the sensitivity analysis of government’s subsidy, we evaluate the effectiveness of this program and its applicability.

  20. Improving communication on hope in palliative care. A qualitative study of palliative care professionals' metaphors of hope: grip, source, tune, and vision.

    Science.gov (United States)

    Olsman, Erik; Duggleby, Wendy; Nekolaichuk, Cheryl; Willems, Dick; Gagnon, Judith; Kruizinga, Renske; Leget, Carlo

    2014-11-01

    Hope is important in palliative care. However, palliative care professionals' perspectives on hope are not well understood. Metaphors of hope are a way of better understanding these perspectives. To describe palliative care professionals' perspectives on hope by examining the hope metaphors they spontaneously used to describe their own hope and their perspectives on the hope of patients and their families. Semistructured interviews with palliative care professionals were recorded, transcribed, and analyzed using a narrative approach. Results were discussed until the researchers reached consensus and reinforced by other health-care professionals and by observing several palliative care settings. The 64 participants (mean (SD) age, 48.42 (9.27) years and 72% female) were physicians (41%), nurses (34%), chaplains (20%), or other professionals (5%), working in Canada (19%) or The Netherlands (81%). Participants described the hope of patients, their families, or themselves as a 1) grip, which implied safety; 2) source, which implied strength; 3) tune, which implied harmony; and 4) vision, which implied a positive perspective. Compared with Dutch participants, Canadian participants generally put more emphasis on spirituality and letting go of their own hope as a grip (safety). Compared with other included professionals, physicians used hope as a grip (safety) most often, whereas chaplains used hope as a tune (harmony) most often. Our findings help to increase the understanding of hope and contribute to improving communication skills in palliative care professionals. Copyright © 2014 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

  1. Meta-Analyses of Predictors of Hope in Adolescents.

    Science.gov (United States)

    Yarcheski, Adela; Mahon, Noreen E

    2016-03-01

    The purposes of this study were to identify predictors of hope in the literature reviewed, to use meta-analysis to determine the mean effect size (ES) across studies between each predictor and hope, and to examine four moderators on each predictor-hope relationship. Using preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines for the literature reviewed, 77 published studies or doctoral dissertations completed between 1990 and 2012 met the inclusion criteria. Eleven predictors of hope were identified and each predictor in relation to hope was subjected to meta-analysis. Five predictors (positive affect, life satisfaction, optimism, self-esteem, and social support) of hope had large mean ESs, 1 predictor (depression) had a medium ES, 4 predictors (negative affect, stress, academic achievement, and violence) had small ESs, and 1 predictor (gender) had a trivial ES. Findings are interpreted for the 11 predictors in relation to hope. Limitations and conclusions are addressed; future studies are recommended. © The Author(s) 2014.

  2. Compression Molding of Composite of Recycled HDPE and Recycled Tire Particles

    Science.gov (United States)

    Liu, Ping; Waskom, Tommy L.; Chen, Zhengyu; Li, Yanze; Peng, Linda

    1996-01-01

    Plastic and rubber recycling is an effective means of reducing solid waste to the environment and preserving natural resources. A project aimed at developing a new composite material from recycled high density polyethylene (HDPE) and recycled rubber is currently being conducted at Eastern Illinois University. The recycled plastic pellets with recycled rubber particles are extruded into some HDPE/rubber composite strands. The strand can be further cut into pellets that can be used to fabricate other material forms or products. This experiment was inspired by the above-mentioned research activity. In order to measure Durometer hardness of the extruded composite, a specimen with relatively large dimensions was needed. Thus, compression molding was used to form a cylindrical specimen of 1 in. diameter and 1 in. thickness. The initial poor quality of the molded specimen prompted a need to optimize the processing parameters such as temperature, holding time, and pressure. Design of experiment (DOE) was used to obtain optimum combination of the parameters.

  3. Hope, self-efficacy, spiritual well-being and job satisfaction.

    Science.gov (United States)

    Duggleby, Wendy; Cooper, Dan; Penz, Kelly

    2009-11-01

    Hope, self-efficacy, spiritual well-being and job satisfaction. This paper is a report of a study of the relations of spiritual well-being, global job satisfaction, and general self-efficacy to hope in Continuing Care Assistants. Healthcare providers have described their hope as an important part of their work and a form of work motivation. Hope may be an important factor in preventing burnout and improving job satisfaction. A concurrent triangulation mixed method design was used. Sixty-four Continuing Care Assistants (personal care aides) who registered for a 'Living with Hope' Conference completed a demographic form, Herth Hope Index, Global Job Satisfaction Questionnaire, Spiritual Well-Being Scale, General Self-Efficacy Scale, and a hope questionnaire. Data were collected in 2007. The response rate was 58%. Using linear regression, 29.9% of the variance in Herth Hope Index score was accounted for by scores from the General Self-Efficacy Scale and Spiritual Well-Being Scale. General Self-efficacy scores (positive relationship) and Spiritual Well-Being scores (negative relationship) accounted for a significant part of the variance. Qualitative data supported all findings, with the exception of the negative relationship between hope and spiritual well-being; participants wrote that faith, relationships, helping others and positive thinking helped them to have hope. They also wrote that hope had a positive influence on their job satisfaction and performance. Hope is an important concept in the work life of Continuing Care Assistants. Supportive relationships, adequate resources, encouragement by others, and improving perceptions of self-efficacy (ability to achieve goals in their workplace) may foster their hope.

  4. Certified Electronics Recyclers

    Science.gov (United States)

    Learn how EPA encourages all electronics recyclers become certified by demonstrating to an accredited, independent third-party auditor and that they meet specific standards to safely recycle and manage electronics.

  5. Recycling and treatment of plastic waste

    International Nuclear Information System (INIS)

    Czvikovszky, T.

    1998-01-01

    Radiation technology, using gamma or electron beams, develops its benefits at highest yield if macromolecular systems are treated. This is valid equally if build-up processes (polymerization, crosslinking) or degradative processes (chain scission, depolymerization) are initiated by radiation. Radiation-induced degradation is applied to convert polytetrafluoroethylene (Teflon) scrap into powder and low-molecular-weight products used in the production of other perfluoro compounds. The Teflon powder is blended with other materials for use as lubricant, and the perfluorocarboxylic derivatives are employed as surfactants. Radiation treatment of polymers could play a build-up role in the recycling of polymer wastes. The non-selective energy transfer from gamma or electron sources to polymer systems produces many kinds of reactive centers such as free radicals, oxydized and peroxydized active groups, on which further reactions may occur. In presence of monomer-like or oligomer-like reactive additives graft-copolymerization may take place, compatibilizing in this way the originally incompatible polymer components. Such a compatibilization is the key solution to recycling commingled plastic waste or producing composite materials of fibrous natural polymers and synthetic thermoplastics

  6. Keeping hope possible: a grounded theory study of the hope experience of parental caregivers who have children in treatment for cancer.

    Science.gov (United States)

    Bally, Jill M G; Duggleby, Wendy; Holtslander, Lorraine; Mpofu, Christopher; Spurr, Shelley; Thomas, Roanne; Wright, Karen

    2014-01-01

    Hope has been found to support parents as they care for their child with a life-limiting or life-threatening illness. However, very little research focuses on the nursing care of parents of pediatric oncology patients, and therefore, nurses may have difficulty in understanding and supporting parental well-being. The purpose of this qualitative study was to gain an understanding of the experience of hope for parents who care for their child in treatment for cancer. Using purposive theoretical sampling, 16 parents participated in this study. Thirty-three open-ended, face-to-face interviews were conducted, and 14 parent journals were collected. Analysis of the data was conducted using Charmaz's constructivist grounded theory approach. A developing, substantive grounded theory was constructed. Parental hope was described as an essential, powerful, deliberate, life-sustaining, dynamic, cyclical process that was anchored in time; was calming and strengthening; and provided inner guidance through the challenging experience of preparing for the worst and hoping for the best. Parents' main concern was "fearing the loss of hope," which was ameliorated by the basic social process of "keeping hope possible" through accepting reality, establishing control, restructuring hope, and purposive positive thinking. Parents journeyed through numerous transitions related to the treatment of cancer that caused feelings of uncertainty, anxiety, stress, and loss of control. Hope was identified as vital to parents. To minimize these adverse experiences, nurses can support parents' ability to keep hope possible and thus to optimize their well-being by understanding, assessing, and supporting parental hope.

  7. Types of hope and action styles of adolescents

    Directory of Open Access Journals (Sweden)

    Aleksandra Myślińska

    2016-04-01

    Full Text Available The problem discussed in this article concerns the relationship between hope and action styles in adolescents. An action style is a way in which man perceives and responds to the outside world, and it may be aimed at securing oneself or interacting with the surroundings. The main aim of this analysis was to find out if, and to what degree, the level of hope is connected with action styles. The following hypotheses are proposed: H – 1. There is a relationship between hope and an action style. H- 2. Persons with different types of hope are characterised by different styles of action. H – 3. Persons with a high level of hope have a cooperation -oriented style. H – 4. Persons with a low level of hope are often characterised by a style aimed at protecting themselves. 149 persons aged 17 – 18 participated in the study. The following methods were used: the Basic Hope Inventory (BHI-12 – compiled by Trzebiński and M. Zięba, the Hope for Success Questionnaire (KNS – adaptation of C. R. Snyder’s questionnaire made by M. Łaguna, J. Trzebiński and M. Zięba, as well as the Action Styles Questionnaire by Z. Uchnast . The results obtained have allowed the researchers to form the opinion that hope helps individuals function better in the world. The way in which a person perceives the world and their own capabilities translates into the style of action which they choose. A person who is full of hope seeks self -actualisation as well as cooperation with others.

  8. Cell phone recycling experiences in the United States and potential recycling options in Brazil.

    Science.gov (United States)

    Silveira, Geraldo T R; Chang, Shoou-Yuh

    2010-11-01

    This paper presents an overview of cell phone recycling programs currently available in the United States. At the same time, it also provides analyses of the current recycling situation and possible recycling alternatives for Brazil. Although there are several recycling options in the United States, collection rates are still only 10% of all potential devices because customers are not aware of these possibilities. The whole system is financially based on reselling refurbished cell phones and recycled materials to developing countries which represent an effective and strong market. Several recyclers offer funds to collection partners who are either charities or who work with charities while obtaining the materials that they need in order to run their operations. A mobile phone recycling system for Brazil considering the United States experience and the Extended Producer Responsibility (EPR) principle is suggested. A deposit/refund/advance-recycling fee is proposed which might be implemented as a voluntary industrial initiative managed by PRO Brazil, a producer responsibility organization. One widespread public-private agreement will integrate all mobile phone stakeholders, and environmental education actions and promotional events will promote citizen's participation. Copyright © 2010 Elsevier Ltd. All rights reserved.

  9. Decisions on Remanufacturing with WTP Disparity and Recycling Competition under Government Subsidies

    Directory of Open Access Journals (Sweden)

    Tong Shu

    2017-08-01

    Full Text Available Enterprises have assigned increasing importance to remanufacturing, and meanwhile, the competitiveness of remanufacturing has also become established. In this article, game theory is exploited and government subsidies for remanufacturing, consumer willingness to pay and recycling competition are considered, with a focus on a supply chain consisting of one local manufacturer and one nonlocal remanufacturer. This study attempts to investigate how nonlocal remanufacturers and local manufacturers determine whether they recycle used products and engage in remanufacturing when these factors are considered, in the hope that the results can be constructive in terms of policies and management related to enterprises and governments. As such, four situations are considered and the corresponding models are built to derive the optimal production of each enterprise in the four different situations. Numerical results under the four situations are furthercompared. The results show that consumer acceptance of remanufactured products, irrespective of whether there is competition in production and recycling of remanufactured products and whetherthe government provides subsidy for remanufacturing directly affects each enterprise, remanufacturing and the profits of the overall supply chains. Based on these factors, enterprises should adjust strategies and choose to compete or stop competing or monopolize the market. The government should define attitudes towards the market competition and supervise the changes of market competitiveness based onmarket competition and consumer acceptance of remanufactured products. This study can provide some constructive guidance for some potential nonlocal enterprises engaged in remanufacturing, and at the same time shed some light for desirable direction in some further research onremanufacturing in theory and practice.

  10. Faith, hope and love in sport

    Directory of Open Access Journals (Sweden)

    Jernej Pisk

    2017-11-01

    Full Text Available In the Christian religious tradition, theological virtues of faith, hope and love have a central role. Along with the cardinal virtues of prudence, justice, fortitude and temperance they present the whole of the good human life. While cardinal virtues can be cultivated by human will, faith, hope and love are given by God and therefore open ‘natural’ human life on Earth toward transcendent spiritual realities. Human beings as bio-psycho-social and spiritual beings incorporate theological virtues in all the activities of their life. In sport, faith, hope and love have an important, though often neglected, role. On a practical level faith can be recognized in any relation between athlete and coach. To trust one’s coach, without any guarantee that the outcome of prescribed workouts will lead to the desired results, needs strong faith, trust and confidence. Moreover, faith is the virtue that makes sport so attractive also for spectators even to the point of being a ‘secular’ religion for the masses. Hope is the virtue of ‘not yet’ or of something ‘being on its way’. For most athletes, daily workouts are not a goal, but just the means to that end. Any reason for doing sports needs a hope behind it in order to move or will oneself to action. Along with hope, understood as a golden mean, we find despair on the one hand and ‘false hope’ on the other. Both are corruptions of hope seen daily in the world of sport. To manage hope in sport practices correctly offers a path to success in sport at all levels. Love is at the apex of the theological virtues. There are many formulations of love both in ancient Greek and Roman times: eros, agape, caritas, amor. Each has its special characteristic meaning also in sport. In sport we can see laughter and tears because any love is connected with highest human joy and deepest depression. Yet, in summation, it is argued that love in sport must be understood as the binding force and source of

  11. Reusing and recycling in Saskatchewan: Environmental benefits of reusing and recycling

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    After an introduction explaining the environmental benefits of reusing and recycling, as well as providing suggestions on minimizing waste and conserving energy, a directory of recyclers and handlers of various kinds of waste in Saskatchewan is presented. Names, addresses/telephone numbers, and types of materials accepted are given for recyclers of animal products, clothing or textiles, glass, compostable materials, industrial hardware, metals, office products, paper, plastic, and tires. Collection depots in the SARCAN recycling program for beverage containers are listed, giving town name, address, hours of operation, and telephone number. Receivers of waste dangerous goods are listed under the categories of ozone-depleting substances, waste batteries, solvents, lubricating oils and oil filters, paint, flammable liquids, antifreeze, drycleaning waste, and miscellaneous.

  12. Recycling of Paper and Cardboard

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund; Damgaard, Anders

    2011-01-01

    waste. Recycling of paper and cardboard production waste and postconsumer waste has a long history in the pulp and paper industry. The recycled material now makes up more than half of the raw material used in European pulp and paper industry (ERPC, 2004). This chapter describes briefly how paper...... and cardboard are produced and how waste paper is recycled in the industry. Quality requirements and use of recycled products are discussed, as are the resource and environmental issues of paper recycling....

  13. Water Recycling in Australia

    Directory of Open Access Journals (Sweden)

    Ross Young

    2011-09-01

    Full Text Available Australia is the driest inhabited continent on earth and, more importantly, experiences the most variable rainfall of all the continents on our planet. The vast majority of Australians live in large cities on the coast. Because wastewater treatments plants were all located near the coast, it was thought that large scale recycling would be problematic given the cost of infrastructure and pumping required to establish recycled water schemes. This all changed when Australia experienced a decade of record low rainfall and water utilities were given aggressive targets to increase the volume of water recycled. This resulted in recycled water being accepted as a legitimate source of water for non-drinking purposes in a diversified portfolio of water sources to mitigate climate risk. To ensure community support for recycled water, Australia lead the world in developing national guidelines for the various uses of recycled water to ensure the protection of public health and the environment. Australia now provides a great case study of the developments in maximizing water recycling opportunities from policy, regulatory and technological perspectives. This paper explores the evolution in thinking and how approaches to wastewater reuse has changed over the past 40 years from an effluent disposal issue to one of recognizing wastewater as a legitimate and valuable resource. Despite recycled water being a popular choice and being broadly embraced, the concept of indirect potable reuse schemes have lacked community and political support across Australia to date.

  14. Recycling of concrete

    International Nuclear Information System (INIS)

    Halaszovich, S.

    1988-01-01

    The paper reviews potentials and problems of disposal or recycling of concrete removed from nuclear installations. Due to the difficulties in determining radioactivity limits that are compatible with utilization of recycled material in practice, a method is proposed that takes into account inhalation of dusts, as occurring during the reprocessing or recycling of the concrete, for instance in road building. This method is based on the maximum permissible radioactivity uptake by inhalation of a nuclide mixture of unknown composition. (RB) [de

  15. Recycle and reuse of radioactive scrap metals within the department of energy

    International Nuclear Information System (INIS)

    Adams, V.; Murphie, W.; Gresalfi, M.

    2000-01-01

    The United States Department of Energy (DOE) National Center of Excellence for Metals Recycle (NMR) is pursuing recycle and reuse alternatives to burial of radioactive scrap metal. This approach is being implemented in a safe and environmentally sound manner, while significantly lowering dis-positioning cost and accelerating cleanup activities. This paper will define the NMR's success to date in promoting safe and cost effective recycle and reuse strategies for DOE's excess metals, through the use of case studies. The paper will also present actual volumes of metal moved by DOE into restricted and unrestricted uses since 1997. In addition, this paper will discuss the principle underlying the Three Building Decommissioning and Decontamination (D and D) Project in Oak Ridge, Tennessee. In January 2000, the Secretary of Energy placed a moratorium on the unrestricted release of volumetrically contaminated metals from the DOE sites. Pursuant to that moratorium, the Secretary also established a ''Re-Use and Recycling Task Force'' to conduct a review of DOE policies regarding the management and release of all materials for recycle and reuse from DOE facilities. This task force was charged to develop a set of recommendations to ensure the protection of public health and the environment, openness and public trust, and fiscal responsibility. This paper will present an overview of the DOE's present range of recycle and reuse alternatives to disposal, as practiced by the NMR, and discuss the policy and issues associated with the task force mission. (authors)

  16. Aluminium beverage can recycling

    Energy Technology Data Exchange (ETDEWEB)

    Lewinski, A von

    1985-08-01

    Canned beverages have become a controversial issue in this era of ecological sensitivity. METALL has already discussed the problem of can recycling. The present article discusses the technical aspects of aluminium can recycling. Two further articles will follow on aluminium can recycling in North America and on the results of European pilot projects.

  17. Maintaining hope at the 11th hour: authenticity buffers the effect of limited time perspective on hope.

    Science.gov (United States)

    Davis, William E; Hicks, Joshua A

    2013-12-01

    Four studies tested the hypothesis that limited time perceptions are associated with lower levels of hope, and that this effect is buffered by high levels of authenticity. Study 1 (n = 256) utilized a cross-sectional design in which participants completed dispositional measures of time perspective, hope, and authenticity. Three subsequent studies tested our hypothesis experimentally. In a pilot study (n = 124), participants reported their perceived authenticity, future time perspective (FTP) was manipulated (limited vs. open-ended), and state hope was assessed. Study 2 (n = 156) introduced a new manipulation of FTP, and Study 3 (n = 242) replicated Study 2 with the addition of a neutral control condition. Across all studies, individuals who perceived time as limited reported lower levels of hope relative to those who perceived time as open-ended (or those in a neutral control condition), but, importantly, this effect was attenuated for highly authentic individuals.

  18. Is There Hope? Is She There? How Families and Clinicians Experience Severe Acute Brain Injury.

    Science.gov (United States)

    Schutz, Rachael E C; Coats, Heather L; Engelberg, Ruth A; Curtis, J Randall; Creutzfeldt, Claire J

    2017-02-01

    Patients with severe acute brain injury (SABI) raise important palliative care considerations associated with sudden devastating injury and uncertain prognosis. The goal of this study was to explore how family members, nurses, and physicians experience the palliative and supportive care needs of patients with SABI receiving care in the neuroscience intensive care unit (neuro-ICU). Semistructured interviews were audiotaped, transcribed, and analyzed using thematic analysis. Thirty-bed neuro-ICU in a regional comprehensive stroke and level-one trauma center in the United States. We completed 47 interviews regarding 15 patients with family members (n = 16), nurses (n = 15), and physicians (n = 16). Two themes were identified: (1) hope and (2) personhood. (1) Families linked prognostic uncertainty to a need for hope and expressed a desire for physicians to acknowledge this relationship. The language of hope varied depending on the participant: clinicians used hope as an object that can be given or taken away, generally in the process of conveying prognosis, while families expressed hope as an action that supported coping with their loved one's acute illness and its prognostic uncertainty. (2) Participants described the loss of personhood through brain injury, the need to recognize and treat the brain-injured patient as a person, and the importance of relatedness and connection, including personal support of families by clinicians. Support for hope and preservation of personhood challenge care in the neuro-ICU as identified by families and clinicians of patients with SABI. Specific practical approaches can address these challenges and improve the palliative care provided to patients and families in the neuro-ICU.

  19. Reusing Recycling Material as Teaching Strategy to Strengthen Environmental Values

    Directory of Open Access Journals (Sweden)

    Yudit Zaida del Carmen Alarcón de Palma

    2017-08-01

    Full Text Available The study was centered interest implement recycling reuse the material as a teaching strategy to strengthen environmental students “Adolfo Moreno” National Basic School Barinitas parish, municipality Bolivar, Barinas state values. School Year 2014 - 2015. The study was based on the paradigm of qualitative research and research in action type. From this point of view, the study focuses on participatory action this mode, it is limited in so-called field layouts. The study its characteristics was fulfilled in the following phases: diagnosis, planning, implementation, evaluation and systematization. Finally, it can be noted that the implementation of teaching strategies reuse recycle material for strengthening environmental students "Adolfo Moreno" National Basic School values; They will be incorporating parents and guardians as well as various educational actors to implement the activities involved in the proposal which seeks to change attitudes to improve through practical actions management standards and conservation practices to achieve an environmental change in institution through technical, theoretical and practical knowledge to strengthen the benefit of recyclables properly handle procedures.

  20. Hope as a Predictor of Interpersonal Suicide Risk

    Science.gov (United States)

    Davidson, Collin L.; Wingate, LaRicka R.; Rasmussen, Kathy A.; Slish, Meredith L.

    2009-01-01

    The current study hypothesized that (1) hope would negatively predict burdensomeness, thwarted belongingness, and acquired capability to enact lethal injury; (2) hope would negatively predict suicidal ideation; and (3) the interpersonal suicide risk factors would predict suicidal ideation. Results indicated that hope negatively predicted…

  1. The Fernald Waste Recycling Program

    International Nuclear Information System (INIS)

    Motl, G.P.

    1993-01-01

    Recycling is considered a critical component of the waste disposition strategy at the Fernald Plant. It is estimated that 33 million cubic feet of waste will be generated during the Fernald cleanup. Recycling some portion of this waste will not only conserve natural resources and disposal volume but will, even more significantly, support the preservation of existing disposition options such as off-site disposal or on-site storage. Recognizing the strategic implications of recycling, this paper outlines the criteria used at Fernald to make recycle decisions and highlights several of Fernald's current recycling initiatives

  2. The recycling is moving

    CERN Multimedia

    GS Department

    2011-01-01

    The recycling site currently situated near building 133 has been transferred to the car park of building 156. The site is identified by the sign “RECYCLING” and the above logo. In this new, more accessible site, you will find recycling bins for the following waste: PET (recyclable plastic bottles); Aluminium cans; Nespresso coffee capsules.  

  3. Hope as experienced in women newly diagnosed with gynaecological cancer

    DEFF Research Database (Denmark)

    Hammer, Kristianna; Mogensen, Ole; Hall, Elisabeth O C

    2009-01-01

    cancer diagnosis made the women oscillate between hope and hopelessness, between positive expectations of getting cured and frightening feelings of the disease taking over. Five major interrelated themes of hope were identified: hope of being cured, cared for and getting back to normal, hope as being...... at a gynaecological department of a Danish university hospital. The women, aged 24-87 (median 52yrs), were diagnosed with ovarian, endometrial, cervical and vulvar cancer. RESULTS: Hope was found to be connected to both diagnosis, cure, family life and life itself and closely tied to hopelessness. The newly received...... active and feeling well, hope as an internal power to maintain integration, hope as significant relationships and hope as fighting against hopelessness. Thus, hope was woven together with hopelessness in a mysterious way; it took command through inner strength and courage based on a trust in being cured...

  4. Recycle Glass in Foam Glass Production

    DEFF Research Database (Denmark)

    Petersen, Rasmus Rosenlund; König, Jakob; Yue, Yuanzheng

    The foam glass industry turn recycle glass into heat insulating building materials. The foaming process is relative insensitive to impurities in the recycle glass. It is therefore considered to play an important role in future glass recycling. We show and discuss trends of use of recycled glasses...... in foam glass industry and the supply sources and capacity of recycle glass....

  5. Auditing an intensive care unit recycling program.

    Science.gov (United States)

    Kubicki, Mark A; McGain, Forbes; O'Shea, Catherine J; Bates, Samantha

    2015-06-01

    The provision of health care has significant direct environmental effects such as energy and water use and waste production, and indirect effects, including manufacturing and transport of drugs and equipment. Recycling of hospital waste is one strategy to reduce waste disposed of as landfill, preserve resources, reduce greenhouse gas emissions, and potentially remain fiscally responsible. We began an intensive care unit recycling program, because a significant proportion of ICU waste was known to be recyclable. To determine the weight and proportion of ICU waste recycled, the proportion of incorrect waste disposal (including infectious waste contamination), the opportunity for further recycling and the financial effects of the recycling program. We weighed all waste and recyclables from an 11-bed ICU in an Australian metropolitan hospital for 7 non-consecutive days. As part of routine care, ICU waste was separated into general, infectious and recycling streams. Recycling streams were paper and cardboard, three plastics streams (polypropylene, mixed plastics and polyvinylchloride [PVC]) and commingled waste (steel, aluminium and some plastics). ICU waste from the waste and recycling bins was sorted into those five recycling streams, general waste and infectious waste. After sorting, the waste was weighed and examined. Recycling was classified as achieved (actual), potential and total. Potential recycling was defined as being acceptable to hospital protocol and local recycling programs. Direct and indirect financial costs, excluding labour, were examined. During the 7-day period, the total ICU waste was 505 kg: general waste, 222 kg (44%); infectious waste, 138 kg (27%); potentially recyclable waste, 145 kg (28%). Of the potentially recyclable waste, 70 kg (49%) was actually recycled (14% of the total ICU waste). In the infectious waste bins, 82% was truly infectious. There was no infectious contamination of the recycling streams. The PVC waste was 37% contaminated

  6. The color and texture of hope: some preliminary findings and implications for hope theory and counseling among diverse racial/ethnic groups.

    Science.gov (United States)

    Chang, Edward C; Banks, Kira Hudson

    2007-04-01

    To clarify and extend Snyder's (1994, 2002) hope theory to a more diverse population, this study examined variations in agentic and pathways thinking, and their relations with social problem solving, affect, and with life satisfaction across a college student sample of 46 European Americans, 30 African Americans, 33 Latinos, and 46 Asian Americans. Although comparative results indicated variations in levels of hope components across the 4 racial/ethnic groups, correlational results indicated that the manner in which hope components related to measures of behavior and adjustment were similar across groups. Regression results indicated similarities and differences in predictors of hope components across the different racial/ethnic groups. Potential implications for promoting hope in working with diverse college students are discussed. (c) 2007 APA, all rights reserved.

  7. Recycling of Metals

    DEFF Research Database (Denmark)

    Damgaard, Anders; Christensen, Thomas Højlund

    2011-01-01

    Metals like iron and aluminium are produced from mineral ore and used for a range of products, some of which have very short lifetimes and thus constitute a major fraction of municipal waste. Packaging in terms of cans, foils and containers are products with a short lifetime. Other products like...... appliances, vehicles and buildings, containing iron and aluminium metals, have long lifetimes before they end up in the waste stream. The recycling of production waste and postconsumer metals has a long history in the metal industry. Some metal smelters are today entirely based on scarp metals. This chapter...... describes briefly how iron and aluminium are produced and how scrap metal is recycled in the industry. Quality requirements and use of recycled products are discussed, as are the resource and environmental issues of metal recycling. Copper and other metals are also found in waste but in much smaller...

  8. Nuclear reactor recyclation device

    International Nuclear Information System (INIS)

    Takigawa, Yukio; Chuma, Kazuto

    1987-01-01

    Purpose: To prevent the unevenness for the coolant flow rate even when abnormality occurs to one of recycling pumps. Constitution: A plurality of jet pumps disposed at an interval around the reactor core are divided circumferentially into two sets, and a pipeway is disposed to the outside of each pair including recycling pumps corresponding to each of the sets. The pipeway is connected to the recycling inlet of the jet pump by way of a manifold. The discharge portion of the recycling pumps of the loop pipeway are connected with each other by way of communication pipes, and a normally closed valve is disposed to the communication pipe and the normally closed valve of the communication pipe is opened upon detecting abnormality for one of the recycling pumps. Thus, if either one of the pair of recycling pumps shows abnormal state, coolants flows from the other of pipeway to the outside of the loop pipeway and coolants are supplied from all the jet pumps to the reactor core portion and, accordingly, the not-uniform flow rate can be prevented to eliminate undesired effect on the reactor core. (Kamimura, M.)

  9. Recycling - Danish Waste Management Strategy

    DEFF Research Database (Denmark)

    Romann, Anne Funch; Thøgersen, John; Husmer, Lis

    The report challanges recycling as the only waste handling strategy. The tonnes of recycled materials should not be the only goal - it is essential to minimize the waste production and focus on eliminating hazardous materials.......The report challanges recycling as the only waste handling strategy. The tonnes of recycled materials should not be the only goal - it is essential to minimize the waste production and focus on eliminating hazardous materials....

  10. Hope, Perceived Financial Risk and Propensity for Indebtedness

    Directory of Open Access Journals (Sweden)

    Lucia Barros

    2012-10-01

    Full Text Available Hope is an important construct in marketing, since it is an antecedent of important marketing variables, such as trust, expectation and satisfaction (MacInnis & Mello, 2005. Specifically, literature suggests that hope plays an important influence in risk perception (MacInnis & Mello, 2005 and propensity for indebtedness (Fleming, 2008. Thus, we aim to investigate the relationships among hope, risk perception related to purchasing and consumption and propensity for indebtedness by conducting two empirical studies. The first is a laboratory experiment, which accessed hope and risk perception of getting a mortgage loan. The second is a survey, investigating university students’ propensity to get indebted to pay for their university tuition, analyzed through the Structural Equations Modeling method. These studies found that higher levels of hope predicted an increase in the propensity to accept the mortgage loan, independent of actual risks, and an increase in the propensity of college students to get indebted to pay for their studies. In addition, the first study suggests that hope may lead to a decrease in risk perception, which, however, wasn’t confirmed by the second study. Finally, this research offers some methodological contributions, using an experimental approach to understand hope and its relationship with perceived financial risk and propensity for indebtedness.

  11. Length sensing and control of a Michelson interferometer with power recycling and twin signal recycling cavities.

    Science.gov (United States)

    Gräf, Christian; Thüring, André; Vahlbruch, Henning; Danzmann, Karsten; Schnabel, Roman

    2013-03-11

    The techniques of power recycling and signal recycling have proven as key concepts to increase the sensitivity of large-scale gravitational wave detectors by independent resonant enhancement of light power and signal sidebands within the interferometer. Developing the latter concept further, twin signal recycling was proposed as an alternative to conventional detuned signal recycling. Twin signal recycling features the narrow-band sensitivity gain of conventional detuned signal recycling but furthermore facilitates the injection of squeezed states of light, increases the detector sensitivity over a wide frequency band and requires a less complex detection scheme for optimal signal readout. These benefits come at the expense of an additional recycling mirror, thus increasing the number of degrees of freedom in the interferometer which need to be controlled.In this article we describe the development of a length sensing and control scheme and its successful application to a tabletop-scale power recycled Michelson interferometer with twin signal recycling. We were able to lock the interferometer in all relevant longitudinal degrees of freedom and thus laid the foundation for further investigations of this interferometer configuration to evaluate its viability for the application in gravitational wave detectors.

  12. Nuclear recycling: costs, savings, and safeguards

    International Nuclear Information System (INIS)

    Spinrad, B.I.

    1985-01-01

    This chapter discusses the economics, physical and chemical processes, and safety of nuclear fuel recycling. The spent fuel must be chemically reprocessed in order to recover uranium and plutonium. Topics considered include indifference costs, recycling in light water reactors (LWRs), plutonium in fast reactors, the choice between recycling and storage, safeguards, and weapons proliferation. It is shown that the economics of recycling nuclear fuel involves the actual costs and savings of the recycling operation in terms of money spent, made, and saved, and the impact of the recycling on the future cost of uranium

  13. Benchmarking survey for recycling.

    Energy Technology Data Exchange (ETDEWEB)

    Marley, Margie Charlotte; Mizner, Jack Harry

    2005-06-01

    This report describes the methodology, analysis and conclusions of a comparison survey of recycling programs at ten Department of Energy sites including Sandia National Laboratories/New Mexico (SNL/NM). The goal of the survey was to compare SNL/NM's recycling performance with that of other federal facilities, and to identify activities and programs that could be implemented at SNL/NM to improve recycling performance.

  14. A tale of five cities: Using recycling frameworks to analyse inclusive recycling performance.

    Science.gov (United States)

    Scheinberg, Anne; Simpson, Michael

    2015-11-01

    'Recycling' is a source of much confusion, particularly when comparing solid waste systems in high-income countries with those in low- and middle-income countries. Few analysts can explain why the performance and structure of recycling appears to be so different in rich countries from poor ones, nor why well-meaning efforts to implement recycling so often fail. The analysis of policy drivers, and the Integrated Sustainable Waste Management (ISWM) framework, come close to an explanation.This article builds on these earlier works, focusing in on five cities profiled in the 2010 UN-Habitat publication (Scheinberg A, Wilson DC and Rodic L (2010) Solid Waste Management in the World's Cities. UN-Habitat's Third Global Report on the State of Water and Sanitation in the World's Cities. Newcastle-on-Tyne, UK: Earthscan Publications). Data from these cities and others provides the basis for developing a new tool to analyse inclusive recycling performance. The points of departure are the institutional and economic relationships between the service chain, the public obligation to remove waste, pollution, and other forms of disvalue, and the value chain, a system of private enterprises trading valuable materials and providing markets for recyclables. The methodological innovation is to use flows of materials and money as indicators of institutional relationships, and is an extension of process flow diagramming.The authors are using the term 'recycling framework analysis' to describe this new form of institutional analysis. The diagrams increase our understanding of the factors that contribute to high-performance inclusive recycling. By focusing on institutional relationships, the article seeks to improve analysis, planning, and ultimately, outcomes, of recycling interventions. © The Author(s) 2015.

  15. Resource Efficient Metal and Material Recycling

    Science.gov (United States)

    Reuter, Markus A.; van Schaik, Antoinette

    Metals enable sustainability through their use and their recyclability. However, various factors can affect the Resource Efficiency of Metal Processing and Recycling. Some typical factors that enable Resource Efficiency include and arranged under the drivers of sustainability: Environment (Maximize Resource Efficiency — Energy, Recyclates, Materials, Water, Sludges, Emissions, Land); Economic Feasibility (BAT & Recycling Systems Simulation / Digitalization, Product vis-à-vis Material Centric Recycling); and Social — Licence to Operate (Legislation, consumer, policy, theft, manual labour.). In order to realize this primary production has to be linked systemically with typical actors in the recycling chain such as Original Equipment Manufacturers (OEMs), Recyclers & Collection, Physical separation specialists as well as process metallurgical operations that produce high value metals, compounds and products that recycle back to products. This is best done with deep knowledge of multi-physics, technology, product & system design, process control, market, life cycle management, policy, to name a few. The combination of these will be discussed as Design for Sustainability (DfS) and Design for Recycling (DfR) applications.

  16. Education for Peace and a Pedagogy of Hope

    Science.gov (United States)

    Carl, A. E.

    2011-01-01

    There are many approaches and arguments on how hope could be given to children in a society characterised by violence and conflict, hope that may contribute towards optimising their potential. This article focuses on the notion and meaning of Peace Education, what the possible link between Peace Education and a Pedagogy of Hope might be and…

  17. Advance Care Planning Does Not Adversely Affect Hope or Anxiety Among Patients With Advanced Cancer.

    Science.gov (United States)

    Green, Michael J; Schubart, Jane R; Whitehead, Megan M; Farace, Elana; Lehman, Erik; Levi, Benjamin H

    2015-06-01

    Many physicians avoid advance care planning (ACP) discussions because they worry such conversations will lead to psychological distress. To investigate whether engaging in ACP using online planning tools adversely affects hope, hopelessness, or anxiety among patients with advanced cancer. Patients with advanced cancer and an estimated survival of two years or less (Intervention group) and a Control group were recruited at a tertiary care academic medical center (2007-2012) to engage in ACP using an online decision aid ("Making Your Wishes Known"). Pre/post and between-group comparisons were made, including hope (Herth Hope Index), hopelessness (Beck Hopelessness Scale), and anxiety (State Trait Anxiety Inventory). Secondary outcomes included ACP knowledge, self-determination, and satisfaction. A total of 200 individuals completed the study. After engaging in ACP, there was no decline in hope or increase in hopelessness in either the Control or Intervention group. Anxiety was likewise unchanged in the Control group but decreased slightly in the Intervention group. Knowledge of ACP (% correct answers) increased in both the groups, but more so in the Intervention group (13% increase vs. 4%; P<0.01). Self-determination increased slightly in both groups, and satisfaction with the ACP process was greater (P<0.01) in the Intervention than Control group. Engaging in ACP with online planning tools increases knowledge without diminishing hope, increasing hopelessness, or inducing anxiety in patients with advanced cancer. Physicians need not avoid ACP out of concern for adversely affecting patients' psychological well-being. Copyright © 2015 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

  18. Printability of papers recycled from toner and inkjet-printed papers after deinking and recycling processes.

    Science.gov (United States)

    Karademir, Arif; Aydemir, Cem; Tutak, Dogan; Aravamuthan, Raja

    2018-04-01

    In our contemporary world, while part of the fibers used in the paper industry is obtained from primary fibers such as wood and agricultural plants, the rest is obtained from secondary fibers from waste papers. To manufacture paper with high optical quality from fibers of recycled waste papers, these papers require deinking and bleaching of fibers at desired levels. High efficiency in removal of ink from paper mass during recycling, and hence deinkability, are especially crucial for the optical and printability quality of the ultimate manufactured paper. In the present study, deinkability and printability performance of digitally printed paper with toner or inkjet ink were compared for the postrecycling product. To that end, opaque 80 g/m 2 office paper was digitally printed under standard printing conditions with laser toner or inkjet ink; then these sheets of paper were deinked by a deinking process based on the INGEDE method 11 p. After the deinking operation, the optical properties of the obtained recycled handsheets were compared with unprinted (reference) paper. Then the recycled paper was printed on once again under the same conditions as before with inkjet and laser printers, to monitor and measure printing color change before and after recycling, and differences in color universe. Recycling and printing performances of water-based inkjet and toner-based laser printed paper were obtained. The outcomes for laser-printed recycled paper were better than those for inkjet-printed recycled paper. Compared for luminosity Y, brightness, CIE a* and CIE b* values, paper recycled from laser-printed paper exhibited higher value than paper recycled from inkjet-printed paper.

  19. Studying precipitation recycling over the Tibetan Plateau using evaporation-tagging and back-trajectory analysis

    Science.gov (United States)

    Gao, Y.

    2017-12-01

    Regional precipitation recycling (i.e., the contribution of local evaporation to local precipitation) is an important component of water cycle over the Tibetan Plateau (TP). Two methods were used to investigate regional precipitation recycling: 1) tracking of tagged atmospheric water parcels originating from evaporation in a source region (i.e., E-tagging), and 2) back-trajectory approach to track the evaporative sources contributed to precipitation in a specific region. These two methods were applied to Weather Research and Forecasting (WRF) regional climate simulations to quantify the precipitation recycling ratio in the TP for three selected years: climatologically normal, dry and wet year. The simulation region is characterized by high average elevation above 4000 m and complex terrain. The back-trajectory approach is also calculated over three sub-regions over the TP: namely western, northeastern and southeastern TP, and the E-tagging approach could provide recycling-ratio distributions over the whole TP. Three aspects are investigated to characterize the precipitation recycling: annual mean, seasonal variations and spatial distributions. Averaged over the TP, the precipitation recycling ratio estimated by the E-tagging approach is higher than that from the back-trajectory method. The back-trajectory approach uses a precipitation threshold as total precipitation in five days divided by a random number, and this number was set to 500 as a tread off between equilibrium and computational efficiency. Lower recycling ratio derived from the back-trajectory approach is related to the precipitation threshold used. The E-tagging, however, tracks every air parcel of evaporation regardless of the precipitation amount. There is no obvious seasonal variation in the recycling ratio using both methods. The E-tagging approach shows high recycling ratios in the center TP, indicating stronger land-atmospheric interactions than elsewhere.

  20. Recycling of Glass

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund; Damgaard, Anders

    2011-01-01

    Glass is used for many purposes, but in the waste system glass is predominantly found in terms of beverage and food containers with a relatively short lifetime before ending up in the waste. Furthermore there is a large amount of flat glass used in building materials which also ends up in the waste...... system; this glass though has a long lifetime before ending up in the waste. Altogether these product types add up to 82% of the production of the European glass industry (IPCC, 2001). Recycling of glass in terms of cleaning and refilling of bottles as well as the use of broken glass in the production...... of new glass containers is well established in the glass industry. This chapter describes briefly howglass is produced and howwaste glass is recycled in the industry. Quality requirements and use of recycled products are discussed, as are the resource and environmental issues of glass recycling....

  1. The Laughter as Hope Principle

    Directory of Open Access Journals (Sweden)

    Mateus Domingues da Silva

    2015-04-01

    Full Text Available The work aims to establish a parallel between the concept of laughter and the Hope Principle of Ernst Bloch, differentiating their relationship between the pursuit of individual happiness, said to be ideological, deceptive and precarious, and the pursuit of collective happiness, altruistic, that despite utopian it is also true and real, just for being selfless and real because, as a collective expression, indicating concretely and politically, is a real possibility.Keywords: Laughter, Hope Principle, Ernest Bloch, altruism.

  2. The Armour of Hope and other works

    OpenAIRE

    Just, Kate

    2013-01-01

    The series of work entitled 'The Skin of Hope' was produced during a 2012 Australia Council for the Arts studio residency in Barcelona, where I was accompanied by my partner Paula and our adopted daughter, Hope. Blurring the usual divide between familial life and art practice, the residency inspired a series of hand knitted sculptures and photographs weaving an account of the ways that Hope and I acknowledge, bond and imprint each other at skin level. Materialising our past wounds and present...

  3. Stainless steel recycle FY94 progress report

    International Nuclear Information System (INIS)

    Imrich, K.J.

    1994-01-01

    The Materials Technology Section (MTS) of the Savannah River Technology Center (SRTC) was asked to demonstrate the practicality of recycling previously contaminated stainless steel components such as reactor heat exchanger heads, process water piping and slug buckets into 208 liters (55 gallon) drums and 2.8 cubic meter (100 ft 3 ) storage boxes. Radioactively contaminated stainless steel scrap will be sent to several industrial partners where it will be melted, decontaminated/cast into ingots, and rolled into plate and sheet and fabricated into the drums and boxes. As part of this recycle initiative, MTS was requested to demonstrate that radioactively contaminated Type 304L stainless steel could be remelted and cast to meet the applicable ASTM specification for fabrication of drums and boxes. In addition, MTS was requested to develop the technical basis of melt decontamination and establish practicality of using this approach for value added products. The findings presented in this investigation lead to the following conclusions: recycle of 18 wt% Cr-8 wt% Ni alloy can be achieved by melting Type 304 stainless steel in a air vacuum induction furnace; limited melt decontamination of the contaminated stainless steel was achieved, surface contamination was removed by standard decontamination techniques; carbon uptake in the as-cast ingots resulted from the graphite susceptor used in this experiment and is unavoidable with this furnace configuration. A new furnace optimized for melting stainless steel has been installed and is currently being tested for use in this program

  4. You're a "What"? Recycling Coordinator

    Science.gov (United States)

    Torpey, Elka Maria

    2011-01-01

    Recycling coordinators supervise curbside and dropoff recycling programs for municipal governments or private firms. Today, recycling is mandatory in many communities. And advancements in collection and processing methods have helped to increase the quantity of materials for which the recycling coordinator is responsible. In some communities,…

  5. Hope in severe disease: a review of the literature on the construct and the tools for assessing hope in the psycho-oncologic setting.

    Science.gov (United States)

    Piccinelli, Claudia; Clerici, Carlo Alfredo; Veneroni, Laura; Ferrari, Andrea; Proserpio, Tullio

    2015-01-01

    Research on the topic of hope began a long time ago but, more recently, interest in this construct has focused mainly on the development of psychometric tools for its assessment. The 2 steps of the present article are defining the construct of hope by completing a preliminary review of the literature and analyzing the tools used to assess hope in the setting of oncologic medicine, conducting a systematic review of the existing scientific literature. Our study was conducted in 2 stages. The first stage involved a nonsystematic preliminary review of the literature, the second a systematic search in all the medical journals contained in the Medline database as of 2012. The literature identified at the first stage was divided according to several topical categories, i.e., theoretical, empirical, and clinical works on the construct of hope. In the second systematic search, we identified the main psychometric tools used to measure hope in the field of clinical oncology and assessed their validity. A total of 22 articles were identified. What emerged when we pooled the findings of our 2 lines of research was that, despite its broad theoretical definitions, the construct of hope can be broken down to a few constituent elements when hope is studied using currently available psychometric tools. In particular, these identified constituent elements were coping, spiritual well-being, quality of life, distress, and depression. The factors contained in the construct of hope include temporality, future, expectancy, motivation, and interconnectedness. The review of the scientific literature does not reveal a clear definition of hope. Multidisciplinary studies are needed to communicate different perspectives (medical, psychological, spiritual, theological) among each other for better definition of the constituent elements of hope in order to support the hope with specific interventions.

  6. Renegotiating hope while living with lymphoedema after cancer: a qualitative study.

    Science.gov (United States)

    Hamilton, R; Thomas, R

    2016-09-01

    Hope is defined as a multi-dimensional life force, a coping resource and a necessity for coping with illness. Concepts of normalcy, hope and loss are explored in this qualitative study and positioned within recent scholarship on hope in cancer survivors. The experiences of 13 participants (11 women, 2 men) in two Canadian provinces who were living with lymphoedema secondary to cancer were analysed. For these participants, hope assumed various meanings. For some, hope was seen as passive inaction, whereas hope for others was positive and action-oriented, even when faced with the uncertainty of chronic illness. Hope for the individual with lymphoedema is also juxtaposed with hope associated with cancer treatment where a desired return to normal is the object of hope and paramount to coping. However, when met with the chronic nature of lymphoedema, the hope of a return to normalcy is lost and the meaning, direction and actions of hope must be renegotiated. © 2015 John Wiley & Sons Ltd.

  7. Management Through Hope

    DEFF Research Database (Denmark)

    Papazu, Irina

    2016-01-01

    fieldwork conducted on Samsø in 2013 and 2014, the paper takes as its starting point a citizens’ meeting in which a new renewable energy project is proposed by a municipal coordinator. This meeting, in which the municipal coordinator exhibits a “change management” attitude, fails to win the citizens......’ support and becomes an entry point into an investigation of how the REI project developers managed to get the island community to actively support the project. A gateway to the past, the meeting allows the author to ethnographically describe the unobserved events of 1997-2007. Findings – The argument...... is that the REI project developers practised management through hope or “hope management”, in contrast to “change management”, creating a project that succeeded in accomplishing its goals of changing the island due to its openness, its rootedness in the island community’s past, and the project developers’ ability...

  8. Exploring the relationship between hope and burnout in competitive sport.

    Science.gov (United States)

    Gustafsson, Henrik; Hassmén, Peter; Podlog, Leslie

    2010-12-01

    Researchers have postulated that hope may be an important factor associated with burnout. Consistent with hope theory contentions, low-hope individuals may be susceptible to burnout because they are prone to experience goal blockage, frustration, and negative affect, all of which likely increase the risk of burnout. We examined the relationship between hope and athlete burnout among 178 competitive athletes (63 females and 115 males) aged 15-20 years. Hope was significantly and negatively correlated with all three burnout subscales: emotional/physical exhaustion, a reduced sense of accomplishment, and sport devaluation. Moreover, results of a multivariate analysis of variance showed that low-hope athletes scored significantly higher than medium- and high-hope athletes on all three burnout dimensions. Finally, results revealed that agency thinking was a significant predictor of all burnout dimensions. Frustration over unmet goals and a perceived lack of agency, a characteristic of low-hope athletes, might pose a risk factor in athlete burnout, whereas being able to maintain hope appears to be associated with health and well-being.

  9. WATER RESISTANCE OF RECYCLED PAPER PANEL

    Directory of Open Access Journals (Sweden)

    Alexander Rani Suryandono

    2017-06-01

    Alice Wisler (2015 Facts about Recycling Paper. http://greenliving.lovetoknow.com/Facts_About_Recycling_Paper. Accessed 2 April 2016 Clay Miller (2011 5 Benefits of Recycling Paper. http://www.ways2gogreenblog.com/2011/09/28/5-benefits-of-recycling-paper/. Accessed 10 May 2016 Hari Goyal (2015 Grades of Paper. http://www.paperonweb.com/grade.htm. Accessed 2 April 2016 Hari Goyal (2015 Properties of Paper. http://www.paperonweb.com/paperpro.htm. Accessed 2 April 2016 Kathryn Sukalich (2016 Everything You Need to Know about Paper Recycling. http://earth911.com/business-policy/business/paper-recycling-details-basics/. Accessed 15 July 2016 [U1] Larry West (2015 Why Recycle Paper. http://environment.about.com/od/recycling/a/The-Benefits-Of-Paper-Recycling-Why-Recycle-Paper.htm. Accesed 15 June 2016 Marie-Luise Blue (2008 The Advantages of Recycling Paper. http://education.seattlepi.com/advantages-recycling-paper-3440.html. Accessed 15 June 2016 Nina Spitzer (2009 http://www.sheknows.com/home-and-gardening/articles/810025/the-impact-of-disposable-coffee-cups-on-the-environment. Accessed 15 June 2016 Radio New Zealand (2010 Iwi not Giving Up Fight against Tasman Mill Discharges. http://www.radionz.co.nz/news/regional/64521/iwi-not-giving-up-fight-against-tasman-mill-discharges. Accessed 15 July 2016 Rick LeBlanc (2016 Paper Recycling Facts, Figures and Information Sources. https://www.thebalance.com/paper-recycling-facts-figures-and-information-sources-2877868?_ga=1.192832942.544061388.1477446686. Accesed 2 April 2016 Robinson Meyer (2016 Will More Newspapers Go Nonprofit? http://www.theatlantic.com/technology/archive/2016/01/newspapers-philadelphia-inquirer-daily-news-nonprofit-lol-taxes/423960/. Accessed 3 August 2016 School of Engineering at Darthmouth (2010 Forest and Paper Industry. http://engineering.dartmouth.edu/~d30345d/courses/engs171/Paper.pdf. Accessed 2 April 2016 T. Subramani, V. Angappan. (2015. Experimental Investigation of Papercrete Concrete

  10. Technology options for future recycling

    International Nuclear Information System (INIS)

    Kikuchi, T.

    2001-01-01

    Recycling of nuclear material is indispensable, not only for using valuable resources but also for reducing the debt which we may leave to the next generations. Advanced reprocessing technologies have been developed in several countries to deal with the diversification of nuclear fuels. Also technologies derived from reprocessing or other fuel cycle areas have continued to be developed in terms of recycling. Cost effectiveness and waste-free processing are increasingly important factors in the applicable of an alternate recycling policy. This paper introduces an example of the studies in this field conducted in some countries including Japan and considers the establishment of effective recycling methodologies taking into account the uncertainty of future recycling policy. (author)

  11. The nonlinear relationship between paper recycling and primary pulp requirements : modeling paper production and recycling in Europe

    NARCIS (Netherlands)

    Schenk, Niels J.; Moll, Henri C.; Potting, Josepha

    Waste paper is suitable for recycling back into paper or for incineration for energy recovery. If waste paper is used for recycling, secondary pulp replaces virgin pulp. Fiber recycling is limited, however, because of physical constraints—particularly the breakage of fiber in the recycling

  12. The ethics of providing hope in psychotherapy.

    Science.gov (United States)

    Dembo, Justine Sarah; Clemens, Norman A

    2013-07-01

    The instillation of hope is a common factor in most psychotherapies. A considerable literature exists on the ethics of providing false or positively biased hope in non-psychiatric medical settings, and ethicists have generally concluded that this practice is unethical. However, the literature on the ethics of encouraging hope in psychotherapy, especially in the case of treatment-resistant mental illness, is sparse. The author explores two clinical cases with the intention of examining the nature of hope, false hope, positive illusions, and denial, as they relate to our definitions of mental health and psychotherapy. The cases highlight the ethics of balancing an acknowledgment of likely treatment futility with a desire to hope. Clinical psychological studies on depressive realism and optimistic bias indicate that some degree of positive bias, referred to by some authors as "the optimal margin of illusion," is in fact necessary to promote what we define as "good mental health;" conversely, stark realism is correlated with mild to moderate depression. An examination of the existential literature, including Ernest Becker's work, The Denial of Death, indicates that without the defense mechanism of denial, human beings tend to experience paralytic despair as a result of being fallible, mortal creatures in a frightening world. The combination of these diverse bodies of literature, along with the surprising outcomes of our case examples, leads to an unexpected conclusion: it may occasionally be ethical to encourage some degree of optimistic bias, and perhaps even positive illusion, when treating patients in psychotherapy.

  13. The Three Rs: Reduce, Reuse, Recycle.

    Science.gov (United States)

    Science Activities, 1991

    1991-01-01

    A student hand-out for a recycling unit defines the terms reduce, recycle, and reuse as they relate to solid waste management. Presents the characteristics of recyclable items such as yard wastes, metals, glass, and paper. Lists organizations through which more information about recycling can be obtained. (MCO)

  14. Metrics of hope: disciplining affect in oncology.

    Science.gov (United States)

    Brown, Nik

    2015-03-01

    This article explores the emergence of a 'regime of hope' in the context of oncology care, practice and research. More specifically, my focus is the emergence, since the 1970s or so, of hope scales and indexes used to metricise the emotional states of cancer patients. These usually take the form of psychometric tests designed and deployed in order to subject affective life to calculative and rational scrutiny. This article locates this within the tensions of a 'turn' towards the emotions in critical social science literature. Scholarship has, for instance, been anxious not to deny the embodied reality of affectivity and the emotions. But it has been equally important to recognise the extent to which emotions are discursively ordered and structured as objects and effects of power. This article charts the emergence of hope scales historically alongside wider historical forces in the metrification of life and health and more specifically the emotions. It locates hope scales in a post-war climate of individual resilience and perseverant enterprise and the significance of hope as a naturalised vitalistic attribute of biopolitical life. © The Author(s) 2014.

  15. Reuse, Reduce, Recycle.

    Science.gov (United States)

    Briscoe, Georgia

    1991-01-01

    Discussion of recycling paper in law libraries is also applicable to other types of libraries. Results of surveys of law libraries that investigated recycling practices in 1987 and again in 1990 are reported, and suggestions for reducing the amount of paper used and reusing as much as possible are offered. (LRW)

  16. Field Performance of Recycled Plastic Foundation for Pipeline

    Science.gov (United States)

    Kim, Seongkyum; Lee, Kwanho

    2015-01-01

    The incidence of failure of embedded pipelines has increased in Korea due to the increasing applied load and the improper compaction of bedding and backfill materials. To overcome these problems, a prefabricated lightweight plastic foundation using recycled plastic was developed for sewer pipelines. A small scale laboratory chamber test and two field tests were conducted to verify its construction workability and performance. From the small scale laboratory chamber test, the applied loads at 2.5% and 5.0% of deformation were 3.45 kgf/cm2 and 5.85 kgf/cm2 for Case S1, and 4.42 kgf/cm2 and 6.43 kgf/cm2 for Case S2, respectively. From the first field test, the vertical deformation of the recycled plastic foundation (Case A2) was very small. According to the analysis based on the PE pipe deformation at the connection (CN) and at the center (CT), the pipe deformation at each part for Case A1 was larger than that for Case A2, which adopted the recycled lightweight plastic foundation. From the second field test, the measured maximum settlements of Case B1 and Case B2 were 1.05 cm and 0.54 cm, respectively. The use of a plastic foundation can reduce the settlement of an embedded pipeline and be an alternative construction method.

  17. Field Performance of Recycled Plastic Foundation for Pipeline

    Directory of Open Access Journals (Sweden)

    Seongkyum Kim

    2015-05-01

    Full Text Available The incidence of failure of embedded pipelines has increased in Korea due to the increasing applied load and the improper compaction of bedding and backfill materials. To overcome these problems, a prefabricated lightweight plastic foundation using recycled plastic was developed for sewer pipelines. A small scale laboratory chamber test and two field tests were conducted to verify its construction workability and performance. From the small scale laboratory chamber test, the applied loads at 2.5% and 5.0% of deformation were 3.45 kgf/cm2 and 5.85 kgf/cm2 for Case S1, and 4.42 kgf/cm2 and 6.43 kgf/cm2 for Case S2, respectively. From the first field test, the vertical deformation of the recycled plastic foundation (Case A2 was very small. According to the analysis based on the PE pipe deformation at the connection (CN and at the center (CT, the pipe deformation at each part for Case A1 was larger than that for Case A2, which adopted the recycled lightweight plastic foundation. From the second field test, the measured maximum settlements of Case B1 and Case B2 were 1.05 cm and 0.54 cm, respectively. The use of a plastic foundation can reduce the settlement of an embedded pipeline and be an alternative construction method.

  18. What can recycling in thermal reactors accomplish?

    International Nuclear Information System (INIS)

    Piet, Steven J.; Matthern, Gretchen E.; Jacobson, Jacob J.

    2007-01-01

    Thermal recycle provides several potential benefits when used as stop-gap, mixed, or backup recycling to recycling in fast reactors. These three roles involve a mixture of thermal and fast recycling; fast reactors are required to some degree at some time. Stop-gap uses thermal reactors only until fast reactors are adequately deployed and until any thermal-recycle-only facilities have met their economic lifetime. Mixed uses thermal and fast reactors symbiotically for an extended period of time. Backup uses thermal reactors only if problems later develop in the fast reactor portion of a recycling system. Thermal recycle can also provide benefits when used as pure thermal recycling, with no intention to use fast reactors. However, long term, the pure thermal recycling approach is inadequate to meet several objectives. (authors)

  19. What can Recycling in Thermal Reactors Accomplish?

    International Nuclear Information System (INIS)

    Steven Piet; Gretchen E. Matthern; Jacob J. Jacobson

    2007-01-01

    Thermal recycle provides several potential benefits when used as stop-gap, mixed, or backup recycling to recycling in fast reactors. These three roles involve a mixture of thermal and fast recycling; fast reactors are required to some degree at some time. Stop-gap uses thermal reactors only until fast reactors are adequately deployed and until any thermal-recycle-only facilities have met their economic lifetime. Mixed uses thermal and fast reactors symbiotically for an extended period of time. Backup uses thermal reactors only if problems later develop in the fast reactor portion of a recycling system. Thermal recycle can also provide benefits when used as pure thermal recycling, with no intention to use fast reactors. However, long term, the pure thermal recycling approach is inadequate to meet several objectives

  20. Properties of Recycled Aggregate Concrete Reinforced with Polypropylene Fibre

    Directory of Open Access Journals (Sweden)

    Wan Mohammad Wan Nur Syazwani

    2016-01-01

    Full Text Available This research work is aimed to investigate how the addition of various proportion of polypropylene fibre affects the mechanical strength and permeability characteristics of recycled aggregate concrete (RAC which has been produced with treated coarse recycled concrete aggregate (RCA. Further research on RAC properties and their applications is of great importance as the scarcity of virgin aggregate sources in close proximity to major urban centers is becoming a worldwide problem. In this study, the hardened RAC properties at the curing age of 7 and 28 days such as compressive strength, flexural strength, ultrasonic pulse velocity (UPV, water absorption and total porosity were evaluated and compare with control specimens. Experimental result indicates that although the inclusion of the treated coarse RCA can enhance the mechanical strength and permeability properties of RAC, Further modification by addition of polypropylene fibre can optimize the results.

  1. Spirituality, hope, and self-sufficiency among low-income job seekers.

    Science.gov (United States)

    2015-04-01

    Self-sufficiency (SS) is an important social welfare policy goal in the United States, yet little is known about the process that leads to SS. To address this gap in the literature, this study examined the relationship between spirituality, hope, and SS among a sample of low-income job seekers (N = 116). It was hypothesized that spirituality would be related to hope, and that hope, in turn, would be related to SS. Using survey data from two workforce development agencies, this hypothesis was confirmed-hope fully mediated the relationship between spirituality and SS. Of the two factors through which hope is commonly operationalized-agency and pathways-supplemental analysis suggested that spirituality only affects SS through the agency channel. To help foster hope in direct practice settings, it is suggested that social workers might employ spiritually modified cognitive-behavioral therapy protocols. Macrostructural interventions that block the pathway component of hope are also suggested to help reverse exclusion from labor market entry. As such, hope needs to be addressed comprehensively-intrapsychically and macrostructurally-to effect bottom-up change for SS. Engendering hope may assist clients overcome some of the many challenges they encounter on the journey to SS.

  2. Posttraumatic growth and hope in parents of children with cancer.

    Science.gov (United States)

    Hullmann, Stephanie E; Fedele, David A; Molzon, Elizabeth S; Mayes, Sunnye; Mullins, Larry L

    2014-01-01

    Posttraumatic growth (PTG), a positive change in values and major life goals experienced as a result of the struggle with a highly challenging life circumstance, has been shown to be related to the construct of hope, the belief that goals can be met. To date, no studies have examined the relationship between PTG and hope in parents of children with cancer. Participants were parents (N = 85) of children and adolescents (ages 2-18 years, M = 7.72 years) receiving treatment for cancer. Parents completed a demographic questionnaire, the Posttraumatic Growth Inventory (PTGI), and Hope Scale (HS). Hope was found to be related to PTG in parents of children with cancer, with higher levels of hope associated with greater PTG. Exploratory analyses on the subscales of the PTGI revealed that hope was also related to higher scores on the Relating to Others, New Possibilities, Personal Strength, and Appreciation of Life subscales. Spiritual change was not related to hope in parents. Findings suggest that experiencing hope during the pediatric cancer experience may facilitate posttraumatic growth in parents. The construct of hope may be an important target of intervention for promoting positive adjustment in this population.

  3. Implementing a campus wide recycling program

    International Nuclear Information System (INIS)

    Alvarez, L.

    2002-01-01

    'Full text:' The University of Windsor is currently expanding its recycling program to include all buildings on campus, but faces two challenges: 1) uncertainty about the current waste composition and distribution on campus; and 2) uncertainty about the effectiveness of increased recycling. This project assesses the current waste composition and the attitudes of the students towards recycling, and evaluates the effectiveness of proposed recycling activities. At present, paper is the only material that is collected throughout the entire campus. Except for two buildings, all other potentially recyclable materials within buildings, such as metal, glass, and plastic beverage containers, are discarded. The main focus of this research is on beverage containers as they represent clearly identifiable materials, but other materials were examined as well. To quantify the waste, different buildings on campus were classified according to their function: academic,operational and administrative. The waste composition study indicated that approximately 33% of the campus waste which is landfilled is composed of potentially recyclable material. A survey was then conducted to gauge the campus population's views on recycling issues that could affect the design of a recycling program. Interestingly, 97% of the respondents indicated a high willingness to recycle, but were uncertain as to how and where to recycle on campus. The project is currently assessing potential diversion rates using new, clearly identifiable recycling receptacles placed within selected classrooms for all major materials. There is a significant tradeoff however because the cost for new receptacles is considerable: multiple materials containers are often placed in high pedestrian traffic locations (e.g., hallways) and not always in classrooms,of which there are often many. This project will evaluate the basic benefits and costs of implementing a more comprehensive recycling program, and recommend how other

  4. Self-esteem and hopefulness in adolescents with cancer.

    Science.gov (United States)

    Ritchie, M A

    2001-02-01

    Increased survivorship in childhood cancer has raised questions about adolescents' psychosocial functioning during the treatment experience and long-term adaptation as cancer survivors. This descriptive correlation study examines the relationships among the stages of adolescence, gender, self-esteem, and hopefulness in a sample of 45 adolescents with cancer. The perceived level of self-esteem was measured by using the Coopersmith Self-Esteem Inventory; the amount of hopefulness was measured by using the Hopefulness Scale for Adolescents. Mean scores for self-esteem and hopefulness were comparable to normative data reported for healthy adolescents on each scale. Perceived level of self-esteem and hopefulness did not significantly differ between boys and girls overall; early, middle, and late adolescents; or between boys and girls within each stage of adolescence. A stepwise multiple regression analysis showed self-esteem and the early stage of adolescence accounted for 27.3% (R2 = .306) of the variance in hopefulness scores. Self-esteem was the most significant predictor (F = 12.456, p = .001), explaining 20.7% of the variance (R2 = .225, p = .001). This study contributes to nursing the knowledge of the psychosocial response and the treatment experience in adolescents with cancer. These results can be used in future research to develop and test nursing actions that can influence a perceived sense of self-esteem and hopefulness and potentially allow for continued psychosocial development and effective coping among these adolescents during treatment and into survivorship.

  5. Lamps recycling aiming at the environment preservation

    International Nuclear Information System (INIS)

    Yamachita, Roberto Akira; Gama, Paulo Henrique R. Pereira; Haddad, Jamil; Santos, Afonso H. Moreira; Guardia, Eduardo C.

    1999-01-01

    The article discusses the following issues of lamps recycling in Brazil: mercury lamps recycling, recycling potential, energy conservation and environmental impacts, enterprises lamps recycling, and incentives policy

  6. An industry response to recycle 2000

    International Nuclear Information System (INIS)

    Motl, G.P.; Loiselle, V.

    1996-01-01

    The US DOE is expected to issue a policy early this year articulating DOE's position on the recycle of DOE radioactive scrap metal. In anticipation of this 'Recycle 2000' initiative, the nuclear industry has formed a new trade association called the Association of Radioactive Metal Recyclers (ARMR). This article describes the Recycle 2000 initiative, provides some background on the ARMR and its membership, and identifies industry views on the actions to be taken and issues to be resolved in Recycle 2000 is to become a reality

  7. Attributes to facilitate e-waste recycling behaviour

    Directory of Open Access Journals (Sweden)

    Senawi Nur Hidayah

    2016-01-01

    Full Text Available This study aims to identify the set of attributes to facilitate electronic waste (e-waste behaviour among the community. E-waste disposal is increasing from year to year in parallel with increasing of global population. The short lifespan of electronics and poor e-waste recycling behaviour is among the main contributors to the steadily increasing of e-waste generated. Current recycling rate among the nation is lacking behind, which is only 10.5%. A questionnaire survey has been conducted among the students in Universiti Teknologi Malaysia to evaluate the current e-waste recycling practice. The results showed that majority of the respondents did not recycle their e-waste on campus. Aggressive efforts is needed to realize the country’s target of 20% recycling rate in year 2020, one of the effective paths is to minimize e-waste generation via active e-waste recycling behaviour among the community. Extensive literatures have been reviewed to classify the attributes to facilitate effective e-waste recycling among the community. Total of five attributes that identified in this study which are Convenience of E- waste Recycling Infrastruture and Services, E-waste Recycling Information, Incentives For E-waste Recycling, Reminder to Recycle E-waste And E-waste Recycling Infrastructure and Services. The set of attributes identified in this study may serve as guideline for the management in designing program to foster e-waste recycling behaviour among the community.

  8. Hope for recovery - how clinicians may facilitate this in their work.

    Science.gov (United States)

    Hobbs, Mia; Baker, Martyn

    2012-04-01

    The importance of having hope for recovery has been highlighted in numerous qualitative studies of recovery. It is identified as a vital part of this process, and guidelines suggest that service providers should therefore facilitate hope in their clinical work; however, they do not indicate how this guidance can be operationalised. To identify the sources of hope for recovery based on the accounts of people with experience of recovery; to ascertain how these accounts show service providers can facilitate such hope in their therapeutic work. Semi-structured interviews were conducted with eight people with experience of recovering from mental health problems. A grounded theory analysis was undertaken. A model conceptualising the role of hope in recovery was developed with three categories: "influence of others on hope", "personal hope" and "doing recovery". The model indicates a complex interaction between hope and recovery with an important role for social context and interpersonal relationships, including those with clinicians. Mental health service providers occupy a powerful position in relation to service users' hope, and must carefully consider how they communicate their own hopefulness about clients' recovery. Suggestions are made about facilitating hope for recovery.

  9. Research, Commercialization, & Workforce Development in the Polymer/Electronics Recycling Industry

    Energy Technology Data Exchange (ETDEWEB)

    Carl Irwin; Rakesh Gupta; Richard Turton; GangaRao Hota; Cyril Logar; Tom Ponzurick; Buddy Graham; Walter Alcorn; Jeff Tucker

    2006-02-01

    The Mid-Atlantic Recycling Center for End-of-Life Electronics (MARCEE) was set up in 1999 in response to a call from Congressman Alan Mollohan, who had a strong interest in this subject. A consortium was put together which included the Polymer Alliance Zone (PAZ) of West Virginia, West Virginia University (WVU), DN American and Ecolibrium. The consortium developed a set of objectives and task plans, which included both the research issues of setting up facilities to demanufacture End-of-Life Electronics (EoLE), the economics of the demanufacturing process, and the infrastructure development necessary for a sustainable recycling industry to be established in West Virginia. This report discusses the work of the MARCEE Project Consortium from November 1999 through March 2005. While the body of the report is distributed in hard-copy form the Appendices are being distributed on CD's.

  10. Recycling of used oil

    International Nuclear Information System (INIS)

    Vipulanandan, C.; Ghurye, G.

    1992-01-01

    This paper reports on used oil which is a valuable resource that should be recycled. Recycling used oil saves energy and natural resources. Used oil can be reprocessed and used as fuel in industrial burners and boilers. Unfortunately, more than 400 million gallons/year of used oil is lost through widespread dumping, partly due to lack of effective recycling procedures. Although used oil is not currently a federally listed hazardous waste, the U.S. EPA has proposed to list it as a hazardous waste, which will make recycling of used oil even more attractive. Laboratory samples, representing used oil, were used for detailed parametric studies and to determine the limitation of extending some of the current physical separation techniques such as sedimentation and centrifuging developed for oil-water and solid-liquid separation

  11. Challenges in plastics recycling

    DEFF Research Database (Denmark)

    Pivnenko, Kostyantyn; Jakobsen, L. G.; Eriksen, Marie Kampmann

    2015-01-01

    Recycling of waste plastics still remains a challenging area in the waste management sector. The current and potential goals proposed on EU or regional levels are difficult to achieve, and even to partially fullfil them the improvements in collection and sorting should be considerable. A study...... was undertaken to investigate the factors affecting quality in plastics recycling. The preliminary results showed factors primarily influencing quality of plastics recycling to be polymer cross contamination, presence of additives, non-polymer impurities, and polymer degradation. Deprivation of plastics quality......, with respect to recycling, has been shown to happen throughout the plastics value chain, but steps where improvements may happen have been preliminary identified. Example of Cr in plastic samples analysed showed potential spreading and accumulation of chemicals ending up in the waste plastics. In order...

  12. Studies on recycled aggregates-based concrete.

    Science.gov (United States)

    Rakshvir, Major; Barai, Sudhirkumar V

    2006-06-01

    Reduced extraction of raw materials, reduced transportation cost, improved profits, reduced environmental impact and fast-depleting reserves of conventional natural aggregates has necessitated the use of recycling, in order to be able to conserve conventional natural aggregate. In this study various physical and mechanical properties of recycled concrete aggregates were examined. Recycled concrete aggregates are different from natural aggregates and concrete made from them has specific properties. The percentages of recycled concrete aggregates were varied and it was observed that properties such as compressive strength showed a decrease of up to 10% as the percentage of recycled concrete aggregates increased. Water absorption of recycled aggregates was found to be greater than natural aggregates, and this needs to be compensated during mix design.

  13. Innovative Vacuum Distillation for Magnesium Recycling

    Science.gov (United States)

    Zhu, Tianbai; Li, Naiyi; Mei, Xiaoming; Yu, Alfred; Shang, Shixiang

    Magnesium recycling now becomes a very important subject as magnesium consumption increases fast around the world. All commonly used magnesium die-casting alloys can be recycled and recovered to the primary metal quality. The recycled materials may be comprised of biscuits, sprues, runners, flash, overflows, dross, sludge, scrap parts, and old parts that are returned from service, An innovative magnesium recycle method, vacuum distillation, is developed and proved out to be able to recycle magnesium scraps, especially machining chips, oily magnesium, smelting sludge, dross or the mixture. With this process at a specific temperature and environment condition, magnesium in scraps can be gasified and then solidified to become crystal magnesium crown. This `recycled' magnesium crown is collected and used as the raw material of magnesium alloys. The experimental results show the vacuum distillation is a feasible and plausible method to recycle magnesium. Further, the cost analysis will be addressed in this paper.

  14. Management and recycling of electronic waste

    International Nuclear Information System (INIS)

    Tanskanen, Pia

    2013-01-01

    Waste electrical and electronic equipment (WEEE) is one of the largest growing waste streams globally. Hence, for a sustainable environment and the economic recovery of valuable material for reuse, the efficient recycling of electronic scrap has been rendered indispensable, and must still be regarded as a major challenge for today’s society. In contrast to the well-established recycling of metallic scrap, it is much more complicated to recycle electronics products which have reached the end of their life as they contain many different types of material types integrated into each other. As illustrated primarily for the recycling of mobile phones, the efficient recycling of WEEE is not only a challenge for the recycling industry; it is also often a question of as-yet insufficient collection infrastructures and poor collection efficiencies, and a considerable lack of the consumer’s awareness for the potential of recycling electronics for the benefit of the environment, as well as for savings in energy and raw materials

  15. The Compressor Recycle System

    OpenAIRE

    Barstad, Bjørn Ove

    2010-01-01

    The compressor recycle system is the main focus of this thesis. When the mass flow through a compressor becomes too low, the compressor can plunge into surge. Surge is a term that is used for axisymmetric oscillation through a compressor and is highly unwanted. The recycle system feeds compressed gas back to the intake when the mass flow becomes too low, and thereby act as a safety system.A mathematical model of the recycle system is extended and simulated in SIMULINK. The mathematical model ...

  16. A pragmatist approach to the hope discourse in health care research.

    Science.gov (United States)

    Herrestad, Henning; Biong, Stian; McCormack, Brendan; Borg, Marit; Karlsson, Bengt

    2014-07-01

    Hope is a central concept in nursing and other fields of health care. However, there is no consensus about the concept of hope. We argue that seeking consensus is futile given the multifaceted and multidimensional nature of the concept, but instead we encourage in-depth studies of the assumptions behind talk about hope in specific contexts. Our approach to the 'science of hope' is inspired by philosophical pragmatism. We argue that hope is a concept that opens different rooms for action in different contexts and that accordingly, all hope interventions are contextually sensitive. Careful attention to how the relative positions and power of nurses and patients influence what can be inferred from their different ways of talking about hope may make hopeful conversations more meaningful in health care relationships. © 2014 John Wiley & Sons Ltd.

  17. MOX recycling-an industrial reality

    International Nuclear Information System (INIS)

    Shallo, G.D.F.

    1996-01-01

    Reprocessing and plutonium recycling have now attained industrial maturity in France and Europe. Specifically, mixed-oxide (MOX) fuel is fabricated and used in light water reactors (LWRs) in satisfactory operating conditions. The utilities and the fuel cycle industry experience no technical difficulties, and European recycling programs are growing steadily, from 18 reactors in operation today up to 50 expected around the year 2000, putting the system reprocessing-recycling in coherence: 25 t of plutonium will then be used each year to produce the electricity equivalence of 25 millions tons of oil. Plutonium recycling in MOX fuel in current LWRs proves to be technically safe and economically competitive and meets natural resource savings and environmental protection objectives. And recycling responds properly to the nonproliferation concerns. Such an industrial experience gives a unique reference for weapons plutonium disposition through MOX use in reactors

  18. ZZ WPPR, Pu Recycling Benchmark Results

    International Nuclear Information System (INIS)

    Lutz, D.; Mattes, M.; Delpech, Marc; Juanola, Marc

    2002-01-01

    Description of program or function: The NEA NSC Working Party on Physics of Plutonium Recycling has commissioned a series of benchmarks covering: - Plutonium recycling in pressurized-water reactors; - Void reactivity effect in pressurized-water reactors; - Fast Plutonium-burner reactors: beginning of life; - Plutonium recycling in fast reactors; - Multiple recycling in advanced pressurized-water reactors. The results have been published (see references). ZZ-WPPR-1-A/B contains graphs and tables relative to the PWR Mox pin cell benchmark, representing typical fuel for plutonium recycling, one corresponding to a first cycle, the second for a fifth cycle. These computer readable files contain the complete set of results, while the printed report contains only a subset. ZZ-WPPR-2-CYC1 are the results from cycle 1 of the multiple recycling benchmarks

  19. The feeling of hope in cancer patients: an existential analysis

    Directory of Open Access Journals (Sweden)

    Catarina Aparecida Sales

    2014-10-01

    Full Text Available This study aimed at unveiling the feeling of hope in people who experience cancer in their existence. Qualitative study based on Heidegger’s phenomenology, performed with eight cancer patients assisted in a philanthropic organization, between December 2013 and February 2014, in a northwestern city in Paraná, Brazil, using the following guiding question: “How do you perceive the feeling of hope at this time in your life?” The analysis resulted in the ontological themes: searching for hope in dealing with cancer, and experiencing feelings of hope and despair in being with others. Patients revealed mixed feelings, going from the lack of hope at the time of diagnosis to a rekindling of hope, as well as those who never lost the will to live. We conclude that living with cancer causes extreme feelings; and hope emerges as a feeling capable of influencing and causes an expressive impact in coping with that.

  20. Frequent Questions on Recycling

    Science.gov (United States)

    This is a list of frequent questions on recycling, broken down into five categories. These are answers to common questions that EPA has received from press and web inquiries. This list is located on the Reduce, Reuse, Recycle website.

  1. Beauty and Hope: A Moral Beauty Intervention

    Science.gov (United States)

    Diessner, Rhett; Rust, Teri; Solom, Rebecca C.; Frost, Nellie; Parsons, Lucas

    2006-01-01

    Pedagogical intervention regarding engagement with natural, artistic and moral beauty can lead to an increase in trait hope. In a quasi-experimental design with college students the intervention group showed significantly higher gain scores on trait hope than did the comparison group; the effect size was moderate. The experimental group also…

  2. Hope for Animals

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 20; Issue 8. Hope for Animals. Prasanna Venkhatesh V. Book Review Volume 20 Issue 8 August 2015 pp 753-754. Fulltext. Click here to view fulltext PDF. Permanent link: https://www.ias.ac.in/article/fulltext/reso/020/08/0753-0754. Author Affiliations.

  3. Recycled concrete with coarse recycled aggregate. An overview and analysis

    Directory of Open Access Journals (Sweden)

    B. González-Fonteboa

    2018-04-01

    Full Text Available The construction field has contributed to environmental degradation, producing a high amount of construction and demolition waste (C&D waste and consuming large volumes of natural resources. In this context, recycled concrete (RC has been recognised as a means to preserve natural resources and reduce space for waste storage. During the last decades, many researchers have developed works studying different recycled concrete properties. This review focuses on structural RC made with coarse recycled aggregate from concrete waste. The main objective is to provide a state of the art report on RC’s properties and an analysis on how to predict them taking into account relevant research works. Moreover, the study tries to collect and update RC findings, proposing equations to define RC’s performance, in terms of mechanical strength, modulus of elasticity, stress-strain, creep and shrinkage.

  4. Effect of storytelling on hopefulness in girl students.

    Science.gov (United States)

    Shafieyan, Shima; Soleymani, Mohammad Reza; Samouei, Raheleh; Afshar, Mina

    2017-01-01

    One of the methods that help students in learning critical thinking and decision-making skills is storytelling. Story helps the students to place themselves in the same situation as the main protagonist and try different ways and finally select and implement the best possible method. The goal of this study is to investigate the effect of storytelling on hopefulness of students, age 8-11 in Isfahan's 2 nd educational district. This is an applied, quasi-experimental study. The study population comprised of 34 randomly selected students attending one of the schools in Isfahan's 2 nd educational district. The data gathering tool was the standard Kazdin hopefulness scale (α = 0.72) and data were gathered before and after 8 storytelling sessions for the intervention group. The gathered data were analyzed using descriptive and analytical (paired and independent t -test) with the help of SPSS Version 18 software. The study's findings showed a significant difference in the average hopefulness score of students in study group in pre- and posttest ( P = 0.04). Furthermore, independent t -test results showed a significant difference in hopefulness score of intervention and control ( P = 0.001). The average hopefulness score of the control group after storytelling sessions was higher than that of the intervention and control. The results show the effectiveness of storytelling as a method for improving hopefulness in students.

  5. Solid waste recycling in Rajshahi city of Bangladesh.

    Science.gov (United States)

    Bari, Q Hamidul; Hassan, K Mahbub; Haque, M Ehsanul

    2012-11-01

    Efficient recycling of solid wastes is now a global concern for a sustainable and environmentally sound management. In this study, traditional recycling pattern of solid waste was investigated in Rajshahi municipality which is the fourth largest city of Bangladesh. A questionnaire survey had been carried out in various recycle shops during April 2010 to January 2011. There were 140 recycle shops and most of them were located in the vicinity of Stadium market in Rajshahi. About 1906 people were found to be involved in recycling activities of the city. The major fraction of recycled wastes were sent to capital city Dhaka for further manufacture of different new products. Only a small amount of wastes, specially plastics, were processed in local recycle factories to produce small washing pots and bottle caps. Everyday, an estimated 28.13 tons of recycled solid wastes were handled in Rajshahi city area. This recycled portion accounted for 8.25% of the daily total generated wastes (341 ton d(-1)), 54.6% of total recyclable wastes (51.49 ton d(-1)) and 68.29% of readily recyclable wastes (41.19 ton d(-1)). Major recycled materials were found to be iron, glass, plastic, and papers. Only five factories were involved in preliminary processing of recyclable wastes. Collecting and processing secondary materials, manufacturing recycled-content products, and then buying recycled products created a circle or loop that ensured the overall success of recycling and generated a host of financial, environmental, and social returns. Copyright © 2012 Elsevier Ltd. All rights reserved.

  6. The Port Hope area initiative from municipal perspective

    International Nuclear Information System (INIS)

    Austin, R.

    2006-01-01

    'Full text:' This paper explores the Municipal perspective of the Port Hope Area Initiative (PHAI). The PHAI is unique in that it emerged from proposals to the Federal Government and subsequently a tri-partite agreement between the Federal Government and the Municipalities of Port Hope and Clarington for the cleanup and management of historic low-level radioactive wastes in long-term waste management facilities in their Municipalities. A key feature of the Port Hope Project is the remediation of many major and small scale sites in the urban area. As part of this Legal Agreement, each Municipality is required to give consent at key milestones for the project to proceed to the next stage. In addition, the Municipality also has veto authority if the preferred option is changed by the federal government during its final review. The Agreement also ensures that the Municipalities have the resources to conduct an independent assessment of the work completed by the federal proponent and to advise the Municipality on related matters. While this Legal Agreement provides the Municipalities with influence over the outcome of the EA and the project description, especially when compared with the typical role of municipalities in other Federal EAs, there are many challenges that Port Hope faces as partner in this process. These include: Balancing Port Hope's interests with those of the Federal Government; Reaching agreement on how clean the remediation sites should be; Considering the interests of future generations while meeting the needs of existing residents; Ensuring that the Project will have a positive legacy for Port Hope; Ensuring that institutional controls are in place and that Port Hope has a partnership role in monitoring the Project performance during the Construction Phase and the long term Maintenance and Monitoring Phase. In this context, this paper presents the unique aspects of the Municipal involvement in the process to finally achieve a safe, environmentally

  7. Carambola optics for recycling of light.

    Science.gov (United States)

    Leutz, Ralf; Fu, Ling; Ries, Harald

    2006-04-20

    Recycling of light allows the luminance (radiance) emitted by a light source to be increased at the cost of reducing the total luminous flux (radiant power). Recycling of light means returning part of the emitted light to the source, where part of it will escape absorption. An optical design that is suitable for multiple and controlled recycling is described. Carambola optics is named for its resemblance to star fruit. Several pairs of mirrors or prisms redirect light repeatedly onto the source, thus achieving multiple transits of the light through the source. This recycled light exits the carambola in the same phase space as light directly emitted and not recycled.

  8. Text recycling: acceptable or misconduct?

    Science.gov (United States)

    Harriman, Stephanie; Patel, Jigisha

    2014-08-16

    Text recycling, also referred to as self-plagiarism, is the reproduction of an author's own text from a previous publication in a new publication. Opinions on the acceptability of this practice vary, with some viewing it as acceptable and efficient, and others as misleading and unacceptable. In light of the lack of consensus, journal editors often have difficulty deciding how to act upon the discovery of text recycling. In response to these difficulties, we have created a set of guidelines for journal editors on how to deal with text recycling. In this editorial, we discuss some of the challenges of developing these guidelines, and how authors can avoid undisclosed text recycling.

  9. CDC Vital Signs: New Hope for Stopping HIV

    Science.gov (United States)

    ... 27 MB] Read the MMWR Science Clips New Hope for Stopping HIV Testing and Medical Care Save ... acquired immunodeficiency syndrome) and early death. There's new hope today for stopping HIV in the US. Medicines ( ...

  10. Structural recycled concrete: utilization of recycled aggregate from construction and demolition wastes

    International Nuclear Information System (INIS)

    Alaejos Gutierrez, P.; Sanchez de Juan, M.

    2015-01-01

    This paper aims to present the main results of CEDEX research works concerning the use of recycled aggregates for structural concretes. By way of conclusion, recommendations on the requirements of the recycled aggregates have been established, providing information about the influence of these aggregates on the properties of structural concrete. (Author)

  11. Plastics recycling: challenges and opportunities.

    Science.gov (United States)

    Hopewell, Jefferson; Dvorak, Robert; Kosior, Edward

    2009-07-27

    Plastics are inexpensive, lightweight and durable materials, which can readily be moulded into a variety of products that find use in a wide range of applications. As a consequence, the production of plastics has increased markedly over the last 60 years. However, current levels of their usage and disposal generate several environmental problems. Around 4 per cent of world oil and gas production, a non-renewable resource, is used as feedstock for plastics and a further 3-4% is expended to provide energy for their manufacture. A major portion of plastic produced each year is used to make disposable items of packaging or other short-lived products that are discarded within a year of manufacture. These two observations alone indicate that our current use of plastics is not sustainable. In addition, because of the durability of the polymers involved, substantial quantities of discarded end-of-life plastics are accumulating as debris in landfills and in natural habitats worldwide. Recycling is one of the most important actions currently available to reduce these impacts and represents one of the most dynamic areas in the plastics industry today. Recycling provides opportunities to reduce oil usage, carbon dioxide emissions and the quantities of waste requiring disposal. Here, we briefly set recycling into context against other waste-reduction strategies, namely reduction in material use through downgauging or product reuse, the use of alternative biodegradable materials and energy recovery as fuel. While plastics have been recycled since the 1970s, the quantities that are recycled vary geographically, according to plastic type and application. Recycling of packaging materials has seen rapid expansion over the last decades in a number of countries. Advances in technologies and systems for the collection, sorting and reprocessing of recyclable plastics are creating new opportunities for recycling, and with the combined actions of the public, industry and governments it

  12. Plastics recycling: challenges and opportunities

    Science.gov (United States)

    Hopewell, Jefferson; Dvorak, Robert; Kosior, Edward

    2009-01-01

    Plastics are inexpensive, lightweight and durable materials, which can readily be moulded into a variety of products that find use in a wide range of applications. As a consequence, the production of plastics has increased markedly over the last 60 years. However, current levels of their usage and disposal generate several environmental problems. Around 4 per cent of world oil and gas production, a non-renewable resource, is used as feedstock for plastics and a further 3–4% is expended to provide energy for their manufacture. A major portion of plastic produced each year is used to make disposable items of packaging or other short-lived products that are discarded within a year of manufacture. These two observations alone indicate that our current use of plastics is not sustainable. In addition, because of the durability of the polymers involved, substantial quantities of discarded end-of-life plastics are accumulating as debris in landfills and in natural habitats worldwide. Recycling is one of the most important actions currently available to reduce these impacts and represents one of the most dynamic areas in the plastics industry today. Recycling provides opportunities to reduce oil usage, carbon dioxide emissions and the quantities of waste requiring disposal. Here, we briefly set recycling into context against other waste-reduction strategies, namely reduction in material use through downgauging or product reuse, the use of alternative biodegradable materials and energy recovery as fuel. While plastics have been recycled since the 1970s, the quantities that are recycled vary geographically, according to plastic type and application. Recycling of packaging materials has seen rapid expansion over the last decades in a number of countries. Advances in technologies and systems for the collection, sorting and reprocessing of recyclable plastics are creating new opportunities for recycling, and with the combined actions of the public, industry and governments it

  13. Ultimate journey of the terminally ill: Ways and pathways of hope.

    Science.gov (United States)

    Daneault, Serge; Lussier, Véronique; Mongeau, Suzanne; Yelle, Louise; Côté, Andréanne; Sicotte, Claude; Paillé, Pierre; Dion, Dominique; Coulombe, Manon

    2016-08-01

    To better understand the role of hope among terminally ill cancer patients. Qualitative analysis. A tertiary specialized cancer centre in Canada. Cancer patients in palliative care with an estimated remaining life expectancy of 12 months or less (N = 12) and their loved ones (N = 12) and treating physicians (N = 12). Each patient underwent up to 3 interviews and identified a loved one who participated in 1 interview. Treating physicians were also interviewed. All interviews were fully transcribed and analyzed by at least 2 investigators. Interviews were collected until saturation occurred. Seven attributes describe the experiences of palliative cancer patients and their caregivers: hope as an irrational phenomenon that is a deeply rooted, affect-based response to adversity; initial hope for miraculous healing; hope as a phenomenon that changes over time, evolving in different ways depending on circumstances; hope for prolonged life when there is no further hope for cure; hope for a good quality of life when the possibility of prolonging life becomes limited; a lack of hope for some when treatments are no longer effective in curbing illness progression; and for others hope as enjoying the present moment and preparing for the end of life. Approaches aimed at sustaining hope need to reflect that patients' reactions might fluctuate between despair and a form of acceptance that leads to a certain serenity. Clinicians need to maintain some degree of hope while remaining as realistic as possible. The findings also raise questions about how hope influences patients' perceptions and acceptance of their treatments. Copyright© the College of Family Physicians of Canada.

  14. Recycling in the 90's - a shared responsibility

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    Recycling means different things to different people. To consumers, recycling can mean putting out bottles and cans for curbside collection. To a product maker - a manufacturer of raw materials, fabricator of goods or products, or brand owner - recycling can mean reformulating goods to include recycled materials. To recycling service providers, recycling can mean providing cost-efficient collection services. To public policy makers in all levels of government recycling can mean establishing collection and utilization regulations. For recycling to work successfully, these diverse groups must work together and share responsibility for its success. Also, if recycling is to succeed on a large scale and over the long term, three critical points must be first addressed: These points are: approach, economics, and markets. These points are discussed

  15. The Call to Teach and Teacher Hopefulness

    Science.gov (United States)

    Bullough, Robert V., Jr.; Hall-Kenyon, Kendra M.

    2011-01-01

    The purpose of this paper is to explore teacher motivation and well-being. Our analysis focuses on two central concepts, the notion of a "calling to teach" and of teacher "hopefulness." Data from 205 preservice and inservice teachers were collected to determine teachers' sense of calling and level of hope. Results indicate that overwhelmingly,…

  16. Compressive strength improvement for recycled concrete aggregate

    Directory of Open Access Journals (Sweden)

    Mohammed Dhiyaa

    2018-01-01

    Full Text Available Increasing amount of construction waste and, concrete remnants, in particular pose a serious problem. Concrete waste exist in large amounts, do not decay and need long time for disintegration. Therefore, in this work old demolished concrete is crashed and recycled to produce recycled concrete aggregate which can be reused in new concrete production. The effect of using recycled aggregate on concrete compressive strength has been experimentally investigated; silica fume admixture also is used to improve recycled concrete aggregate compressive strength. The main parameters in this study are recycled aggregate and silica fume admixture. The percent of recycled aggregate ranged from (0-100 %. While the silica fume ranged from (0-10 %. The experimental results show that the average concrete compressive strength decreases from 30.85 MPa to 17.58 MPa when the recycled aggregate percentage increased from 0% to 100%. While, when silica fume is used the concrete compressive strength increase again to 29.2 MPa for samples with 100% of recycled aggregate.

  17. Cost effectiveness of recycling: A systems model

    Energy Technology Data Exchange (ETDEWEB)

    Tonjes, David J., E-mail: david.tonjes@stonybrook.edu [Department of Technology and Society, College of Engineering and Applied Sciences, Stony Brook University, Stony Brook, NY 11794-3560 (United States); Waste Reduction and Management Institute, School of Marine and Atmospheric Sciences, Stony Brook University, Stony Brook, NY 11794-5000 (United States); Center for Bioenergy Research and Development, Advanced Energy Research and Technology Center, Stony Brook University, 1000 Innovation Rd., Stony Brook, NY 11794-6044 (United States); Mallikarjun, Sreekanth, E-mail: sreekanth.mallikarjun@stonybrook.edu [Department of Technology and Society, College of Engineering and Applied Sciences, Stony Brook University, Stony Brook, NY 11794-3560 (United States)

    2013-11-15

    Highlights: • Curbside collection of recyclables reduces overall system costs over a range of conditions. • When avoided costs for recyclables are large, even high collection costs are supported. • When avoided costs for recyclables are not great, there are reduced opportunities for savings. • For common waste compositions, maximizing curbside recyclables collection always saves money. - Abstract: Financial analytical models of waste management systems have often found that recycling costs exceed direct benefits, and in order to economically justify recycling activities, externalities such as household expenses or environmental impacts must be invoked. Certain more empirically based studies have also found that recycling is more expensive than disposal. Other work, both through models and surveys, have found differently. Here we present an empirical systems model, largely drawn from a suburban Long Island municipality. The model accounts for changes in distribution of effort as recycling tonnages displace disposal tonnages, and the seven different cases examined all show that curbside collection programs that manage up to between 31% and 37% of the waste stream should result in overall system savings. These savings accrue partially because of assumed cost differences in tip fees for recyclables and disposed wastes, and also because recycling can result in a more efficient, cost-effective collection program. These results imply that increases in recycling are justifiable due to cost-savings alone, not on more difficult to measure factors that may not impact program budgets.

  18. Reusing recycled aggregates in structural concrete

    Science.gov (United States)

    Kou, Shicong

    The utilization of recycled aggregates in concrete can minimize environmental impact and reduce the consumption of natural resources in concrete applications. The aim of this thesis is to provide a scientific basis for the possible use of recycled aggregates in structure concrete by conducting a comprehensive programme of laboratory study to gain a better understanding of the mechanical, microstructure and durability properties of concrete produced with recycled aggregates. The study also explored possible techniques to of improve the properties of recycled aggregate concrete that is produced with high percentages (≧ 50%) of recycled aggregates. These techniques included: (a) using lower water-to-cement ratios in the concrete mix design; (b) using fly ash as a cement replacement or as an additional mineral admixture in the concrete mixes, and (c) precasting recycled aggregate concrete with steam curing regimes. The characteristics of the recycled aggregates produced both from laboratory and a commercially operated pilot construction and demolition (C&D) waste recycling plant were first studied. A mix proportioning procedure was then established to produce six series of concrete mixtures using different percentages of recycled coarse aggregates with and without the use of fly ash. The water-to-cement (binder) ratios of 0.55, 0.50, 0.45 and 0.40 were used. The fresh properties (including slump and bleeding) of recycled aggregate concrete (RAC) were then quantified. The effects of fly ash on the fresh and hardened properties of RAC were then studied and compared with those RAC prepared with no fly ash addition. Furthermore, the effects of steam curing on the hardened properties of RAC were investigated. For micro-structural properties, the interfacial transition zones of the aggregates and the mortar/cement paste were analyzed by SEM and EDX-mapping. Moreover, a detailed set of results on the fracture properties for RAC were obtained. Based on the experimental

  19. Predictors of hope among women with breast cancer during chemotherapy

    Directory of Open Access Journals (Sweden)

    Alessandra Cristina Sartore Balsanelli

    Full Text Available Abstract OBJECTIVE Identifying the predictors of hope in patients with breast cancer during chemotherapy treatment. METHOD A prospective longitudinal study. The sample was composed of 122 women who responded to the instruments of hope, anxiety and depression, coping, fatigue, religiosity and self-esteem in the first and last cycle of chemotherapy. These variables were used in adjusting the logistic regression model that characterized multivariate statistics, allowing identification of predictor variables. RESULT The increase of hope at the end of chemotherapy treatment was statistically significant (p = 0.012. The delay in undergoing treatment from the onset of breast cancer symptoms, Karnofsky Performance Status, depression, self-esteem and pain were characterized as factors being associated to hope by univariate analysis. Among the variables analyzed, pain was the only predicting factor of hope. CONCLUSION Pain was the predicting factor in this sample. Hope increased during treatment and revealed the following associated factors: Karnofsky Performance Status, delay in starting the treatment, depression, self-esteem and pain. This study brought forth a multidisciplinary contribution, allowing for understanding the factors that can influence hope and presenting support to nursing care. The data evidenced conditions of improvement or worsening of hope, which requires interdisciplinary attention in Oncology.

  20. The Diffusion Effect of MSW Recycling

    OpenAIRE

    Yi-Tui Chen; Fu-Chiang Yang; Shih-Heng Yu

    2017-01-01

    The purpose of this paper is to compare the recycling performance for some waste fractions selected including food waste, bulk waste, paper, metal products, plastics/rubber and glass products and then to develop some directions for the future improvements. The priority of each waste fraction for recycling is also analyzed by using an importance-performance analysis. Traditionally, the recycling rate that is calculated by the ratio of waste recycled to waste collected is used as an indicator t...

  1. Coolant clean-up and recycle systems

    International Nuclear Information System (INIS)

    Ito, Takao.

    1979-01-01

    Purpose: To increase the service life of mechanical seals in a shaft sealing device, eliminate leakages and improve the safety by providing a recycle pump for feeding coolants to a coolant clean-up device upon reactor shut-down and adapting the pump treat only low temperature and low pressure coolants. Constitution: The system is adapted to partially take out coolants from the pipeways of a recycling pump upon normal operation and feed them to a clean-up device. Upon reactor shut-down, the recycle pump is stopped and coolants are extracted by the recycle pump for shut-down into the clean-up device. Since the coolants are not fed to the clean-up device by the recycle pump during normal operation as conducted so far, high temperature and high pressure coolants are not directly fed to the recycle pump, thereby enabling to avoid mechanical problems in the pump. (Kamimura, M.)

  2. Japan's fuel recycling policy

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    The Atomic Energy Commission (AEC) has formulated Japanese nuclear fuel recycling plan for the next 20 years, based on the idea that the supply and demand of plutonium should be balanced mainly through the utilization of plutonium for LWRs. The plan was approved by AEC, and is to be incorporated in the 'Long term program for development and utilization of nuclear energy' up for revision next year. The report on 'Nuclear fuel recycling in Japan' by the committee is characterized by Japanese nuclear fuel recycling plan and the supply-demand situation for plutonium, the principle of the possession of plutonium not more than the demand in conformity with nuclear nonproliferation attitude, and the establishment of a domestic fabrication system of uranium-plutonium mixed oxide fuel. The total plutonium supply up to 2010 is estimated to be about 85 t, on the other hand, the demand will be 80-90 t. The treatment of plutonium is the key to the recycling and utilization of nuclear fuel. By around 2000, the private sector will commercialize the fabrication of the MOX fuel for LWRs at the annual rate of about 100 t. Commitment to nuclear nonproliferation, future nuclear fuel recycling program in Japan, MOX fuel fabrication system in Japan and so on are reported. (K.I.)

  3. Design study of advanced nuclear fuel recycle system. Conceptual study of recycle system using molten salt

    International Nuclear Information System (INIS)

    Kakehi, I.; Shirai, N.; Hatano, M.; Kajitani, M.; Yonezawa, S.; Kawai, T.; Kawamura, F.; Tobe, K.; Takahashi, K.

    1996-12-01

    For the purpose of developing the future nuclear fuel recycle system, the design study of the advanced nuclear fuel recycle system is being conducted. This report describes intermediate accomplishments in the conceptual system study of the advanced nuclear fuel recycle system. Fundamental concepts of this system is the recycle system using molten salt which intend to break through the conventional concepts of purex and pellet fuel system. Contents of studies in this period are as follows, 1)feasibility study of the process by Cd-cathode for nitride fuel, 2)application study for the molten salt of low melting point (AlCl3+organic salt), 3)research for decladding (advantage of decladding by heat treatment), 4)behavior of FPs in electrorefining (behavior of iodine and volatile FP chlorides, FPs behavior in chlorination), 5)criticality analysis in electrorefiner, 6)drawing of off-gas flow diagram, 7)drawing of process machinery concept (cathode processor, vibration packing), 8)evaluation for the amounts of the high level radioactive wastes, 9)quality of the recycle fuels (FPs contamination of recycle fuel), 10)conceptual study of in-cell handling system, 11)meaning of the advanced nuclear fuel recycle system. The conceptual system study will be completed in describing concepts of the system and discussing issues for the developments. (author)

  4. Comfort and hope in the preanesthesia stage in patients undergoing surgery.

    Science.gov (United States)

    Seyedfatemi, Naima; Rafii, Forough; Rezaei, Mahboubeh; Kolcaba, Katharine

    2014-06-01

    Comfort and hope have been identified as important components in the care of perianesthesia patients. The purpose of this study was to explore the relationship between comfort and hope in the preanesthesia stage in patients undergoing surgery. A descriptive cross-sectional survey was conducted with 191 surgical patients. Data were collected using the Perianesthesia Comfort Questionnaire and Herth Hope Index. Direct and significant relationships were observed between comfort and hope (P≤.001, r=0.65). Also, significant relationships were observed between educational level and marital status with comfort (P≤.01). The relationship between educational level and hope was significant (P≤.001). Significant relationships were also observed between gender and marital status with hope (P≤.01). Overall, this study showed that a significant relationship exists between comfort and hope. Additionally, some demographic characteristics influenced comfort and hope in these patients. Health care providers should arrange the environment in a way that allows the surgical patients to experience comfort and hope and recognize the impact of personal characteristics when caring for surgical patients, particularly in the preanesthesia stage. Copyright © 2014 American Society of PeriAnesthesia Nurses. Published by Elsevier Inc. All rights reserved.

  5. Influence of recycled aggregate quality and proportioning criteria on recycled concrete properties.

    Science.gov (United States)

    López-Gayarre, F; Serna, P; Domingo-Cabo, A; Serrano-López, M A; López-Colina, C

    2009-12-01

    This paper presents the results of experimental research using concrete produced by substituting part of the natural coarse aggregates with recycled aggregates from concrete demolition. The influence of the quality of the recycled aggregate (amount of declassified and source of aggregate), the percentage of replacement on the targeted quality of the concrete to be produced (strength and workability) has been evaluated. The granular structure of concrete and replacement criteria were analyzed in this study, factors which have not been analyzed in other studies. The following properties of recycled concretes were analyzed: density, absorption, compressive strength, elastic modulus, amount of occluded air, penetration of water under pressure and splitting tensile strength. A simplified test program was designed to control the costs of the testing while still producing sufficient data to develop reliable conclusions in order to make the number of tests viable whilst guaranteeing the reliability of the conclusions. Several factors were analyzed including the type of aggregate, the percentage of replacement, the type of sieve curve, the declassified content, the strength of concrete and workability of concrete and the replacement criteria. The type of aggregate and the percentage of replacement were the only factors that showed a clear influence on most of the properties. Compressive strength is clearly affected by the quality of recycled aggregates. If the water-cement ratio is kept constant and the loss of workability due to the effect of using recycled aggregate is compensated for with additives, the percentage of replacement of the recycled aggregate will not affect the compressive strength. The elastic modulus is affected by the percentage of replacement. If the percentage of replacement does not exceed 50%, the elastic modulus will only change slightly.

  6. Proceedings of the waste recycling workshop

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, R.E.; Thomas, A.F.; Ries, M.A. [eds.] [Ohio State Univ., Columbus, OH (United States)

    1993-12-31

    Recorded are seventeen talks from five sessions at the workshop. FERMCO`s recycling program, state of the art recycling technology, and an integrated demonstration of deactivation, decommissioning and decommissioning are presented in the plenary session. In the concrete session, decontamination and recycling are discussed. In the transite session, regulations are considered along with recycling and decontamination. In the metals session, radioactive scrap metals are emphasized. And in the regulatory considerations and liabilities session, DOE and EPA viewpoints are discussed. (GHH)

  7. MOX fuel reprocessing and recycling

    International Nuclear Information System (INIS)

    Guillet, J.L.

    1990-01-01

    This paper is devoted to the reprocessing of MOX fuel in UP2-800 plant at La Hague, and to the MOX successive reprocessing and recycling. 1. MOX fuel reprocessing. In a first step, the necessary modifications in UP2-800 to reprocess MOX fuel are set out. Early in the UP2-800 project, actions have been taken to reprocess MOX fuel without penalty. They consist in measures regarding: Dissolution; Radiological shieldings; Nuclear instrumentation; Criticality. 2. Mox successive reprocessing and recycling. The plutonium recycling in the LWR is now a reality and, as said before, the MOX fuel reprocessing is possible in UP2-800 plant at La Hague. The following actions in this field consist in verifying the MOX successive reprocessing and recycling possibilities. After irradiation, the fissile plutonium content of irradiated MOX fuel is decreased and, in this case, the re-use of plutonium in the LWR need an important increase of initial Pu enrichment inconsistent with the Safety reactor constraints. Cogema opted for reprocessing irradiated MOX fuel in dilution with the standard UO2 fuel in appropriate proportions (1 MOX for 4 UO2 fuel for instance) in order to save a fissile plutonium content compatible with MOX successive recycling (at least 3 recyclings) in LWR. (author). 2 figs

  8. 40 CFR 141.76 - Recycle provisions.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Recycle provisions. 141.76 Section 141...) NATIONAL PRIMARY DRINKING WATER REGULATIONS Filtration and Disinfection § 141.76 Recycle provisions. (a... recycle spent filter backwash water, thickener supernatant, or liquids from dewatering processes must meet...

  9. Inspiring hope-A physician's responsibility, translating the science into clinical practice.

    Science.gov (United States)

    Temple, Walley J

    2018-03-01

    Giving hope to patients is our responsibility. It is the essence of a meaningful practice in medicine. Science now allows us to understand this complex and multidimensional human dynamic, and translate it into clinical practice. Quantitative research has shown hope is strong even in terminal illness. Through qualitative methodology hope fostering strategies and hope hindering behaviors have been identified. This exciting new knowledge facilitates the challenging task of disclosure of bad news while enabling hope. © 2017 Wiley Periodicals, Inc.

  10. Hope pictured in drawings by women newly diagnosed with gynecological cancer

    DEFF Research Database (Denmark)

    Hammer, Kristianna; Hall, Elisabeth; Mogensen, Ole

    2013-01-01

    BACKGROUND:: In mysterious ways, hope makes life meaningful even in chaotic and uncontrolled situations. When a woman is newly diagnosed with gynecologic cancer, hope is ineffable and needs exploring. Drawings help express ineffable phenomena. OBJECTIVE:: The aim of the study was to explore how...... women newly diagnosed with gynecologic cancer express the meaning of hope in drawings. METHOD:: Participants were 15 women who on the same day had received the diagnosis of gynecologic cancer. They were between 24 and 87 years (median, 52 years) with a variety of gynecologic cancer diagnoses. Data from...... 15 drawings and postdrawing interviews with the women were analyzed using visual and hermeneutic phenomenology. RESULTS:: Three themes emerged: hope as a spirit to move on, hope as energy through nature, and hope as a communion with families. CONCLUSION:: Hope as pictured in drawings often appears...

  11. Auditing Operating Room Recycling: A Management Case Report.

    Science.gov (United States)

    McGain, Forbes; Jarosz, Katherine Maria; Nguyen, Martin Ngoc Hoai Huong; Bates, Samantha; O'Shea, Catherine Jane

    2015-08-01

    Much waste arises from operating rooms (ORs). We estimated the practical and financial feasibility of an OR recycling program, weighing all waste from 6 ORs in Melbourne, Australia. Over 1 week, 237 operations produced 1265 kg in total: general waste 570 kg (45%), infectious waste 410 kg (32%), and recyclables 285 kg (23%). The achieved recycling had no infectious contamination. The achieved recycling/potential recycling rate was 285 kg/517 kg (55%). The average waste disposal costs were similar for general waste and recycling. OR recycling rates of 20%-25% total waste were achievable without compromising infection control or financial constraints.

  12. Tourism, Tolerance, or Hospitality? An Assessment of a Native/Non-Native, Urban/Rural Youth Exchange Program between Fort Good Hope, NWT, and East Vancouver, BC

    Science.gov (United States)

    Hern, Matt

    2009-01-01

    This article considers and assesses a youth exchange project between two community-based youth centers: The Purple Thistle Centre in East Vancouver, British Columbia, and the K'asho Got'ine Youth Centre in Fort Good Hope, Northwest Territories. Both centers serve primarily low-income youth, but after that the similarities are very few. The…

  13. Electric vehicle recycling 2020: Key component power electronics.

    Science.gov (United States)

    Bulach, Winfried; Schüler, Doris; Sellin, Guido; Elwert, Tobias; Schmid, Dieter; Goldmann, Daniel; Buchert, Matthias; Kammer, Ulrich

    2018-04-01

    Electromobility will play a key role in order to reach the specified ambitious greenhouse gas reduction targets in the German transport sector of 42% between 1990 and 2030. Subsequently, a significant rise in the sale of electric vehicles (EVs) is to be anticipated in future. The amount of EVs to be recycled will rise correspondingly after a delay. This includes the recyclable power electronics modules which are incorporated in every EV as an important component for energy management. Current recycling methods using car shredders and subsequent post shredder technologies show high recycling rates for the bulk metals but are still associated with high losses of precious and strategic metals such as gold, silver, platinum, palladium and tantalum. For this reason, the project 'Electric vehicle recycling 2020 - key component power electronics' developed an optimised recycling route for recycling power electronics modules from EVs which is also practicable in series production and can be implemented using standardised technology. This 'WEEE recycling route' involves the disassembly of the power electronics from the vehicle and a subsequent recycling in an electronic end-of-life equipment recycling plant. The developed recycling process is economical under the current conditions and raw material prices, even though it involves considerably higher costs than recycling using the car shredder. The life cycle assessment shows basically good results, both for the traditional car shredder route and the developed WEEE recycling route: the latter provides additional benefits from some higher recovery rates and corresponding credits.

  14. Adaptation and validation of The Hope Index for Brazilian adolescents Adaptação e validação da The Hope Index para adolescentes Brasileiros

    Directory of Open Access Journals (Sweden)

    Juliana Cerentini Pacico

    2011-01-01

    Full Text Available This study aimed at adapting and validating the Staats Hope Index for Brazilian adolescents. Participants were 450 high school students aged from 14 to 18 years old being 56% females. They responded to the Staats Hope Index, Adult Dispositional Hope Scale, Revised Life Orientation Test (LOT-R and Rosenberg Self-Esteem Scale. A factor analysis extracted two factors, replicating the structure of the original scale. Coefficients alphas were .83 and .81, for each factor, respectively. The correlations of the Hope Index factors with dispositional hope, optimism and self-esteem were similar to the findings reported in the literature and indicated convergent validity. The results indicate that the Hope Index is valid to be used in Brazil and that hope is perceived similarly by Brazilians and Americans despite of some cultural differences.O objetivo deste estudo foi adaptar e validar a escala The Hope Index para adolescentes brasileiros. Participaram 450 estudantes do ensino médio, sendo 56% do sexo feminino. As idades variaram entre 14 e 18 anos. Os instrumentos utilizados foram the Hope Index, Adult Dispositional Hope Scale, Revised Life Orientation Test (LOT-R e Rosenberg Self-esteem Scale. A análise fatorial revelou duas dimensões, conforme a estrutura original da escala com valores do coeficiente alfa de 0,83 e 0,81. As correlações dos fatores da escala The Hope Index com esperança disposicional, otimismo e autoestima foram similares aos achados da literatura e indicam validade convergente. Esses resultados indicam que a escala é válida para uso no Brasil e que Brasileiros e Americanos percebem a esperança de modo similar, apesar de algumas diferenças culturais.

  15. Feedwater recycling system in BWR type reactor

    International Nuclear Information System (INIS)

    Shimamoto, Yoshiharu.

    1980-01-01

    Purpose: To improve the reactor safety by preventing thermal stresses and cracks generated in structural materials due to the fluctuations in the temperature for high temperature water - low temperature water mixture near the feedwater nozzle. Method: Feedwater pipes are connected to a pressure vessel not directly but by way of a flow control valve. While the recycled water is circulated from an inlet nozzle to an outlet nozzle through a recycle pump, flow control valve and recycling pipeways, feedwater is fed from the feedwater pipes to the recycling pipeways by way of the flow control valve. More specifically, since the high temperature recycle water and the low temperature recycle water are mixed within the pipeways, the temperature fluctuations resulted from the temperature difference between the recycle water and the feedwater is reduced to prevent thermal fatigue and generation of cracks thereby securing the reactor safety. (Furukawa, Y.)

  16. Technology options for future recycling

    International Nuclear Information System (INIS)

    Kikuchi, T.

    2000-01-01

    It goes without saying that recycling of nuclear material is indispensable, not only for the effective use of valuable resources but also to reduce the debt which we may leave to the next generations. Many developments in advanced reprocessing technologies have been carried out in several countries to deal with the diversification of nuclear fuels. Also technologies derived from reprocessing or other fuel cycle areas have continued to be developed in terms of recycling. Cost effectiveness and waste-free processing are increasingly important factors in the applicable of an alternate recycling policy. This paper introduces an example of the studies in this field, which has been conducted in Japan and considers the establishment of effective recycling methodologies taking into account the uncertainty of future policy. (authors)

  17. The stress-buffering effects of hope on adjustment to multiple sclerosis.

    Science.gov (United States)

    Madan, Sindia; Pakenham, Kenneth I

    2014-12-01

    Hope is an important resource for coping with chronic illness; however, the role of hope in adjusting to multiple sclerosis (MS) has been neglected, and the mechanisms by which hope exerts beneficial impacts are not well understood. This study aims to examine the direct and stress-moderating effects of dispositional hope and its components (agency and pathways) on adjustment to MS. A total of 296 people with MS completed questionnaires at time 1 at 12 months later and time 2. Focal predictors were stress, hope, agency and pathways, and the adjustment outcomes were anxiety, depression, positive affect, positive states of mind and life satisfaction. Results of regression analyses showed that as predicted, greater hope was associated with better adjustment after controlling for the effects of time 1 adjustment and relevant demographics and illness variables. However, these direct effects of hope were subsumed by stress-buffering effects. Regarding the hope components, the beneficial impacts of agency emerged via a direct effects mechanism, whereas the effects of pathways were evidenced via a moderating mechanism. Findings highlight hope as an important protective coping resource for coping with MS and accentuate the roles of both agency and pathways thinking and their different modes of influence in this process.

  18. In psoriasis, levels of hope and quality of life are linked.

    Science.gov (United States)

    Hawro, Tomasz; Maurer, Marcus; Hawro, Marlena; Kaszuba, Andrzej; Cierpiałkowska, Lidia; Królikowska, Monika; Zalewska, Anna

    2014-09-01

    Psychological resources such as hope have been suggested to positively influence quality of life (QoL) in chronic disorders. Here, we determined hope levels of psoriasis vulgaris in-patients and analyzed their relation to QoL. A total of 60 (29 male) patients were assessed for their QoL with a generic tool (WHOQOL-BREF) and a skin disease-specific instrument, the Dermatology Life Quality Index (DLQI). Hope levels were determined by use of the Basic Hope Inventory. We found a positive correlation between hope and all domains of WHOQOL-BREF (physical: r = 0.446, p = 0.000; psychological r = 0.464, p = 0.000; social r = 0.302, p = 0.019; environmental r = 0.480, p = 0000; and global r = 0.501, p = 0.000) and a negative correlation with DLQI (r = -0.281, p = 0.030) indicating higher QoL in patients with high hope. Hope was not correlated with disease severity or duration. Hope may play a substantial role in preventing QoL impairment in psoriasis. Psychotherapeutic interventions aimed at strengthening hope could improve QoL in this condition.

  19. Recycling of reprocessed uranium

    International Nuclear Information System (INIS)

    Randl, R.P.

    1987-01-01

    Since nuclear power was first exploited in the Federal Republic of Germany, the philosophy underlying the strategy of the nuclear fuel cycle has been to make optimum use of the resource potential of recovered uranium and plutonium within a closed fuel cycle. Apart from the weighty argument of reprocessing being an important step in the treatment and disposal of radioactive wastes, permitting their optimum ecological conditioning after the reprocessing step and subsequent storage underground, another argument that, no doubt, carried weight was the possibility of reducing the demand of power plants for natural uranium. In recent years, strategies of recycling have emerged for reprocessed uranium. If that energy potential, too, is to be exploited by thermal recycling, it is appropriate to choose a slightly different method of recycling from the one for plutonium. While the first generation of reprocessed uranium fuel recycled in the reactor cuts down natural uranium requirement by some 15%, the recycling of a second generation of reprocessed, once more enriched uranium fuel helps only to save a further three per cent of natural uranium. Uranium of the second generation already carries uranium-232 isotope, causing production disturbances, and uranium-236 isotope, causing disturbances of the neutron balance in the reactor, in such amounts as to make further fabrication of uranium fuel elements inexpedient, even after mixing with natural uranium feed. (orig./UA) [de

  20. Characterization of quality recycled gypsum and plasterboard with maximized recycled content

    International Nuclear Information System (INIS)

    Jiménez-Rivero, J.; García-Navarro, J.

    2017-01-01

    The quality of secondary materials is imperative to promote a circular economy. In order to improve the way in which the quality of recycled gypsum is assessed, European guidelines on recycled gypsum (RG) quality criteria have been outlined in the framework of the Life+ Gypsum to Gypsum (GtoG) project. Such GtoG guidelines, along with the European Standard on gypsum plasterboard EN 520, provided the basis for this study. During the GtoG project, gypsum recycling and plasterboard manufacturing processes were monitored by testing the gypsum feedstock and the plasterboard produced. The aim of this paper is to discuss the results obtained on relevant parameters that characterize gypsum as a secondary raw material, as well as the resulting product. The minimum requirements were fulfilled by 56% of the RG samples and 86% of the plasterboard with increased RG. [es

  1. Synthesis and chemical recycling of high polymers using C1 compounds; C1 kagobutsu ni yoru kobunshi no chemical recycle

    Energy Technology Data Exchange (ETDEWEB)

    Masuda, T. [National Institute of Materials and Chemical Research, Tsukuba (Japan)

    1997-09-01

    The paper outlined a study of the synthesis of high polymers using C1 compounds which are continuously usable chemical materials and the related compounds such as the derivatives, and also the chemical recycle. In the case of waste plastics mixed in urban refuse, effective is the chemical recycle where C1 compounds obtained by gasifying the mixed waste are used as high polymer material. For the synthesis and recycle of high polymers using C1 compounds, there are three routes: Route A (recycle via high polymer materials), Route B (recycle via C1 compounds and high polymer materials), and Route C including global-scale carbon recycle (recycle via carbon dioxide from biodegradable plastics using microorganism). Among high polymers, those that can be synthesized from C1 compounds, for example, polymethylene, polyacetal and polyketone can be chemically recycled by Route B. 30 refs., 2 figs., 1 tab.

  2. A UK perspective on recycling

    International Nuclear Information System (INIS)

    Williams, T.

    1991-01-01

    The United Kingdom, through the recycling of depleted uranium from Magnox reactors into Advanced Gas-cooled Reactor (AGR) fuel, has already recycled significant quantities of reprocessed material in reactors owned by Nuclear Electric plc and Scottish Nuclear Limited. This AGR fuel has been satisfactorily irradiated and discharged over a decade or more, and will be reprocessed in the new Thermal Oxide Reprocessing Plant (THORP), currently under construction in the UK. British Nuclear Fuels plc (BNFL) and the UK Atomic Energy Authority (UKAEA) have also been exploiting the potential of plutonium recycled in mixed oxide (MOX) fuel, which they have been making since 1963. All of the UK nuclear companies are committed to further recycling of Magnox depleted uranium during the 1990s, and it is anticipated that oxide recycling will also become firmly established during the next decade. British Nuclear Fuels and Urenco Ltd, as the providers of fuel cycle services, are developing an infrastructure to close the fuel cycle for oxide nuclear fuel, using both the uranium and plutonium arising from reprocessing. (author)

  3. Autism, "recovery (to normalcy)", and the politics of hope.

    Science.gov (United States)

    Broderick, Alicia A

    2009-08-01

    This article draws on the traditions of critical discourse analysis (N. Fairclough, 1995, 2001; M. Foucault, 1972, 1980; J. P. Gee, 1999) in critically examining the discursive formation of "recovery" from autism in applied behavioral analysis (ABA) discourse and its relationship to constructs of hope. Constituted principally in the work of O. I. Lovaas (1987) and C. Maurice (1993), and central to ABA discourse on recovery, has been the construction of a particular vision of hope that has at least 2 integral conceptual elements: (a) Hope for recovery within ABA discourse is constructed in binary opposition to hopelessness, and (b) recovery within ABA discourse is discursively constructed as "recovery (to normalcy)." The author analyzes these 2 pivotal ABA texts within the context of an analysis of other uses of the term recovery in broader bodies of literature: (a) within prior autism-related literature, particularly autobiography, and (b) within literature emanating from the psychiatric survivors' movement. If, indeed, visions of hope inform educational policy and decision making, this analysis addresses S. Danforth's (1997) cogent query, "On what basis hope?", and asserts that moral and political commitments should be central sources of visions of hope and, therefore, inform educational policy and decision making for young children with labels of autism.

  4. Herth hope index: psychometric testing of the Chinese version.

    Science.gov (United States)

    Chan, Keung Sum; Li, Ho Cheung William; Chan, Sally Wai-Chi; Lopez, Violeta

    2012-09-01

    This article is a report on psychometric testing of the Chinese version of the herth hope index. The availability of a valid and reliable instrument that accurately measures the level of hope in patients with heart failure is crucial before any hope-enhancing interventions can be appropriately planned and evaluated. There is no such instrument for Chinese people. A test-retest, within-subjects design was used. A purposive sample of 120 Hong Kong Chinese patients with heart failure between the ages of 60 and 80 years admitted to two medical wards was recruited during an 8-month period in 2009. Participants were asked to respond to the Chinese version of the herth hope index, Hamilton depression rating scale and Rosenberg's self-esteem scale. The internal consistency, content validity and construct validity and test-retest reliability of the Chinese version of the herth hope index were assessed. The newly translated scale demonstrated adequate internal consistency, good content validity and appropriate convergent and discriminant validity. Confirmatory factor analysis added further evidence of the construct validity of the scale. Results suggest that the newly translated scale can be used as a self-report assessment tool in assessing the level of hope in Hong Kong Chinese patients with heart failure. © 2011 Blackwell Publishing Ltd.

  5. Preemptive strikes: Fear, hope, and defensive aggression.

    Science.gov (United States)

    Halevy, Nir

    2017-02-01

    Preemptive strikes are costly and harmful. Existing models of defensive aggression focus narrowly on the role fear plays in motivating preemptive strikes. Theoretically integrating the literatures on conflict, decision making, and emotion, the current research investigated how specific emotions associated with certainty or uncertainty, including fear, anger, disgust, hope, and happiness, influence preemptive strikes. Study 1 demonstrated that hope negatively predicts defensive exits from relationships in choice dilemmas. Studies 2 and 3 experimentally manipulated risk of being attacked in an incentivized, interactive decision making task-the Preemptive Strike Game. Risk of being attacked fueled preemptive strikes; reduced feelings of hope partially mediated this effect in Study 3. Studies 4 and 5 investigated preemptive strikes under uncertainty (rather than risk). In Study 4, reasoning about the factors that make one trustful of others curbed preemptive strikes; cogitating about the factors that underlie discrete emotions, however, did not influence defensive aggression. Study 5 demonstrated that the valence and uncertainty appraisals of incidental emotions interact in shaping preemptive strikes. Specifically, recalling an autobiographical emotional experience that produced hope significantly decreased attack rates relative to fear, happiness, and a control condition. Fear, anger, disgust, and happiness were either unrelated to preemptive strikes or showed inconsistent relationships with preemptive strikes across the 5 studies. These findings shed light on how emotions shape defensive aggression, advance knowledge on strategic choice under risk and uncertainty, and demonstrate hope's positive effects on social interactions and relationships. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  6. Recycling Pressure-Sensitive Products

    Science.gov (United States)

    Jihui Guo; Larry Gwin; Carl Houtman; Mark Kroll; Steven J. Severtson

    2012-01-01

    The efficient control of contaminants such as metals, plastics, inks and adhesives during the processing of recovered paper products determines the profitability of recycling mills. In fact, it is arguably the most important technical obstacle in expanding the use of recycled paper.1-4 An especially challenging category of contaminants to manage...

  7. DWPF Recycle Evaporator Simulant Tests

    International Nuclear Information System (INIS)

    Stone, M

    2005-01-01

    Testing was performed to determine the feasibility and processing characteristics of an evaporation process to reduce the volume of the recycle stream from the Defense Waste Processing Facility (DWPF). The concentrated recycle would be returned to DWPF while the overhead condensate would be transferred to the Effluent Treatment Plant. Various blends of evaporator feed were tested using simulants developed from characterization of actual recycle streams from DWPF and input from DWPF-Engineering. The simulated feed was evaporated in laboratory scale apparatus to target a 30X volume reduction. Condensate and concentrate samples from each run were analyzed and the process characteristics (foaming, scaling, etc) were visually monitored during each run. The following conclusions were made from the testing: Concentration of the ''typical'' recycle stream in DWPF by 30X was feasible. The addition of DWTT recycle streams to the typical recycle stream raises the solids content of the evaporator feed considerably and lowers the amount of concentration that can be achieved. Foaming was noted during all evaporation tests and must be addressed prior to operation of the full-scale evaporator. Tests were conducted that identified Dow Corning 2210 as an antifoam candidate that warrants further evaluation. The condensate has the potential to exceed the ETP WAC for mercury, silicon, and TOC. Controlling the amount of equipment decontamination recycle in the evaporator blend would help meet the TOC limits. The evaporator condensate will be saturated with mercury and elemental mercury will collect in the evaporator condensate collection vessel. No scaling on heating surfaces was noted during the tests, but splatter onto the walls of the evaporation vessels led to a buildup of solids. These solids were difficult to remove with 2M nitric acid. Precipitation of solids was not noted during the testing. Some of the aluminum present in the recycle streams was converted from gibbsite to

  8. The Port Hope area initiative municipal involvement

    International Nuclear Information System (INIS)

    Austin, Rick; Stevenson, Mark

    2006-01-01

    Port Hope (Canada) contains one of the world's oldest nuclear facility sites. From the 1930's through to the 1970's, processing residues from radium refining facilities located at the Port Hope Harbour were being stored and/or deposited on numerous sites throughout the municipality. For a variety of reasons, including spillage of material during transportation and un-monitored or unauthorized diversion of materials, many private and public properties in the municipality were contaminated with low level radioactive waste. Over the past 30 years, the community has demanded that the nuclear industry and the federal government clean up the mess left in Port Hope. In the 1980's and 1990's, the federal government sought to fulfill its commitment to clean up over one million cubic metres of contaminated material remaining in Port Hope but was unable to find a solution. The Low Level Radioactive Waste Management Siting Task Force worked in trying to find a home for historic LLRW in the 1980's and 1990's. It is only within the past 6 years that Port Hope's community began to see the 'light at the end of the tunnel'. And, the light began to shine when the communities took the issue of long term management of the waste into their own hands and proposed possible solutions to the federal government. So the Port Hope Area Initiative is a community-based initiative. In this paper the author presents some of the reasons for success (so far) and some opportunities and challenges that his municipality, and specifically municipal Council, faces as a partner in this Environmental Assessment and project development process. He addresses some of the key elements of the Project that he believes have led to the success of the Project to this point, including: the Legal Agreement and Agreement Monitoring process; the Property Value Protection Program; the Hosting Fee; the Municipal veto on some decisions; the end Use as an asset to the Community; the Value of Peer Review. He also touches

  9. 77 FR 31841 - Hope Gas, Inc.; Notice of Baseline Filing

    Science.gov (United States)

    2012-05-30

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. PR12-23-001] Hope Gas, Inc.; Notice of Baseline Filing Take notice that on May 16, 2012, Hope Gas, Inc. (Hope Gas) submitted a revised baseline filing of their Statement of Operating Conditions for services provided under Section 311 of the...

  10. 77 FR 26535 - Hope Gas, Inc.; Notice of Baseline Filing

    Science.gov (United States)

    2012-05-04

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. PR12-23-000] Hope Gas, Inc.; Notice of Baseline Filing Take notice that on April 26, 2012, Hope Gas, Inc. (Hope Gas) submitted a baseline filing of their Statement of Operating Conditions for services provided under Section 311 of the...

  11. Recycling ampersand incineration: Evaluating the choices

    International Nuclear Information System (INIS)

    Denison, R.A.; Ruston, J.

    1993-01-01

    Conflicts between proponents of municipal solid waste incineration and advocates of recycling have escalated with efforts to reduce the volume of waste that ends up in landfills. Central to this debate is competition for materials that are both combustible and recyclable. Environmental and economic concerns also play a major role. This book, produced by the Environmental Defense Fund, compares recycling and incineration. It is intended for 'citizens, government officials, and business people who want to help resolve the solid-waste crisis.' The book is divided into three parts: recycling and incineration; health and environmental risk of incineration; and planning, public participation, and environmental review requirements. The book does an excellent job of discussing the benefits of recycling and the pitfalls of incineration. It provides helpful information for identifying questions that should be raised about incineration, but it does not raise similar queries about recycling. There is much worthwhile information here, but the book would be more useful if it identified critical issues for all waste reduction and management options

  12. Transferring hope

    DEFF Research Database (Denmark)

    Høyen, Marianne

    in yet another educational intitiative. As educated fast-track teachers they enter settings where they face social and cultural challenges, as they are not educated the way the local teachers and the teacher's union prefers. These teachers therefore have to build their hope for the future from three...... their academic and vocational qualifications were viewed adversely. I explore how the informants construct their new working life under these conditions through narratives about past and future. Drawing on Bruner’s Life as Narrative (2004), I study their use of language, comparing the discourse around...

  13. Organizing Hope

    DEFF Research Database (Denmark)

    Jensen, Boris Brorman; Hjemdal, Tor Inge

    2012-01-01

    Greenland has four municipalities and four Mayors. All four Mayors were invited to Ilulissat in February 2012 to meet with the Possible Greenland team. On the second day of the seminar the Mayor of Qaasuitsup Municipality Jess Svane had to fly up north to Nutaarmiut and assist the small community...... after a young man killed three family members and wounded four others. Tor Inge Hjemdal and Boris Brorman Jensen met with the other three mayors: Simon Simonsen, Asii Chemnitz Narup and Hermann Berthelsen to discuss their hopes and concerns for Greenland....

  14. Encouraging Vietnamese Household Recycling Behavior: Insights and Implications

    Directory of Open Access Journals (Sweden)

    The Ninh Nguyen

    2017-01-01

    Full Text Available This research aims to provide new insights into various determinants affecting household recycling. By focusing on Vietnam, this research also extends knowledge about sustainable behavior in emerging markets, which are the major culprits in terms of greenhouse gas emissions. Hypotheses were developed as a result of the critical review of relevant studies in the fields of marketing, psychology, and economics, and then tested using a quantitative survey data. Structured questionnaires were administered to Vietnamese respondents which yielded 486 usable responses. Multivariate statistics reveal that all the determinants influenced their recycling behavior except for moral norms. Attitude towards the importance of recycling exerted the strongest influence, followed by subjective norms and warm glow respectively. On the other hand, attitude towards the inconvenience of recycling significantly reduced recycling behavior. The research findings have important implications for strategies aimed at promoting recycling behavior. Communication and education programs should emphasize how household recycling contributes to environmental protection, as well as stress intrinsic rewards when recycling. Public media campaigns should feature opinion leaders and attractive communicators, who can effectively apply social pressure to perform recycling behavior. Organizations should also make every effort to make recycling more convenient.

  15. Antimony recycling in the United States in 2000

    Science.gov (United States)

    Carlin, James F.

    2006-01-01

    The importance of recycling has become more obvious as concerns about the environment and import dependence have grown in recent years. When materials are recycled, fewer natural resources are consumed, and less waste products go to landfills or pollute the water and air. This study, one of a series of reports on metals recycling in 2000, discusses the flow of antimony from mining through its uses and disposal with emphasis on recycling. In 2000, the recycling efficiency for antimony was estimated to be 89 percent, and the recycling rate was about 20 percent.

  16. The motivational properties of hope in goal striving

    NARCIS (Netherlands)

    Nelissen, R.M.A.

    2017-01-01

    We argue that hope is not an expectancy based on beliefs about pathways to desired goals and personal capacities to act on them, but an experience of the mere possibility of a desired outcome. We propose that in the latter sense, hope has unique motivational consequences for goal striving.

  17. Mechanical and chemical recycling of solid plastic waste.

    Science.gov (United States)

    Ragaert, Kim; Delva, Laurens; Van Geem, Kevin

    2017-11-01

    This review presents a comprehensive description of the current pathways for recycling of polymers, via both mechanical and chemical recycling. The principles of these recycling pathways are framed against current-day industrial reality, by discussing predominant industrial technologies, design strategies and recycling examples of specific waste streams. Starting with an overview on types of solid plastic waste (SPW) and their origins, the manuscript continues with a discussion on the different valorisation options for SPW. The section on mechanical recycling contains an overview of current sorting technologies, specific challenges for mechanical recycling such as thermo-mechanical or lifetime degradation and the immiscibility of polymer blends. It also includes some industrial examples such as polyethylene terephthalate (PET) recycling, and SPW from post-consumer packaging, end-of-life vehicles or electr(on)ic devices. A separate section is dedicated to the relationship between design and recycling, emphasizing the role of concepts such as Design from Recycling. The section on chemical recycling collects a state-of-the-art on techniques such as chemolysis, pyrolysis, fluid catalytic cracking, hydrogen techniques and gasification. Additionally, this review discusses the main challenges (and some potential remedies) to these recycling strategies and ground them in the relevant polymer science, thus providing an academic angle as well as an applied one. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Filter Backwash Recycling Rule Documents

    Science.gov (United States)

    The purpose of the FBRR is to require (PWSs) to review their recycle practices and, where appropriate, work with the state Primacy Agency to make any necessary changes to recycle practices that may compromise microbial control.

  19. Coal liquefaction with preasphaltene recycle

    Science.gov (United States)

    Weimer, Robert F.; Miller, Robert N.

    1986-01-01

    A coal liquefaction system is disclosed with a novel preasphaltene recycle from a supercritical extraction unit to the slurry mix tank wherein the recycle stream contains at least 90% preasphaltenes (benzene insoluble, pyridine soluble organics) with other residual materials such as unconverted coal and ash. This subject process results in the production of asphaltene materials which can be subjected to hydrotreating to acquire a substitute for No. 6 fuel oil. The preasphaltene-predominant recycle reduces the hydrogen consumption for a process where asphaltene material is being sought.

  20. The impact of mixed, hope and forgiveness-focused marital counselling on interpersonal cognitive distortions of couples filing for divorce.

    Science.gov (United States)

    Navidian, A; Bahari, F

    2014-09-01

    Divorce and conflict are overlapping processes. Previous findings suggest that spirituality-related interventions in mental health nursing may play a significant role in reducing the level and amount of conflict. We examined the effects of hope and forgiveness-focused marital counselling and a combination of the two intervention types on interpersonal cognitive distortions of couples filing for divorce in Isfahan, Iran. We conducted a quasi-experimental study with a pre-test and post-test design. Of 440 couples referred to the Crisis Intervention Center undergoing pre-divorce counselling, 60 were randomly assigned to four groups: hope-focused, forgiveness-focused, mixed and control. Data were gathered using the Interpersonal Cognitive Distortions Scale and analysed using the non-parametric Kruskal-Wallis, Mann-Whitney's U and Wilcoxon tests. Hope- and forgiveness-focused interventions did not have a significant effect on the total number of interpersonal cognitive distortions in comparison with the control group. However, the mixed intervention significantly reduced irrational expectations and interpersonal rejection among couples. Combining hope- and forgiveness-focused interventions can be used to decrease irrational marital beliefs among couples. In addition, rating the level of conflict among couples is important for determining the type of intervention that should be used by mental health nurses (psycho-educational or therapeutic). © 2013 John Wiley & Sons Ltd.

  1. Copper Cable Recycling Technology. Innovative Technology Summary Report

    International Nuclear Information System (INIS)

    2001-01-01

    The United States Department of Energy (DOE) continually seeks safer and more cost-effective technologies for use in deactivation and decommissioning (D and D) of nuclear facilities. The Deactivation and Decommissioning Focus Area (DDFA) of the DOE's Office of Science and Technology (OST) sponsors large-scale demonstration and deployment projects (LSDDPs). At these LSDDPs, developers and vendors of improved or innovative technologies showcase products that are potentially beneficial to the DOE's projects and to others in the D and D community. Benefits sought include decreased health and safety risks to personnel and the environment, increased productivity, and decreased costs of operation. The Idaho National Engineering and Environmental Laboratory (INEEL) generated a list of statements defining specific needs and problems where improved technology could be incorporated into ongoing D and D tasks. One such need is to reduce the volume of waste copper wire and cable generated by D and D. Deactivation and decommissioning activities of nuclear facilities generates hundreds of tons of contaminated copper cable, which are sent to radioactive waste disposal sites. The Copper Cable Recycling Technology separates the clean copper from contaminated insulation and dust materials in these cables. The recovered copper can then be reclaimed and, more importantly, landfill disposal volumes can be reduced. The existing baseline technology for disposing radioactively contaminated cables is to package the cables in wooden storage boxes and dispose of the cables in radioactive waste disposal sites. The Copper Cable Recycling Technology is applicable to facility decommissioning projects at many Department of Energy (DOE) nuclear facilities and commercial nuclear power plants undergoing decommissioning activities. The INEEL Copper Cable Recycling Technology Demonstration investigated the effectiveness and efficiency to recycle 13.5 tons of copper cable. To determine the effectiveness

  2. Hope voor het MKB : goede resultaten na toepassing Human Oriented Production Engineering (HOPE)

    NARCIS (Netherlands)

    Verweij, M.J.

    1997-01-01

    De doorlooptijd werd 40% korter, de kwaliteitsproblemen namen af en de voorraden slonken met een kwart. Het Belgische bedrijf Verhaegen was zeer tevreden over de resultaten van de methode HOPE (Human Oriented Production Engineering). Dit Europeese project richt zich op het midden- en kleinbedrijf.

  3. Regional nuclear fuel cycle centers study project

    International Nuclear Information System (INIS)

    Bennett, L.; Catlin, R.G.; Meckoni, V.

    1977-01-01

    The concept of regional fuel cycle centers (RFCC) has attracted wide interest. The concept was endorsed by many countries in discussions at the General Conference of the International Atomic Energy Agency and at the General Assembly of the United Nations. Accordingly, in 1975, the IAEA initiated a detailed study of the RFCC concept. The Agency study has concentrated on what is referred to as the ''back-end'' of the fuel cycle because that is the portion which is currently problematic. The study covers transport, storage, processing and recycle activities starting from the time the spent fuel leaves the reactor storage pools and through all steps until the recycled fuel is in finished fuel elements and shipped to the reactor. A detailed evaluation of the specific features of large regional fuel cycle centers established on a multinational basis vis-a-vis smaller dispersed fuel cycle facilities set up on a national basis has been carried out. The methodology for assessment of alternative strategies for fuel storage, reprocessing, and recycling of plutonium has been developed, characteristic data on material flows and cost factors have been generated, and an analytic system has been developed to carry out such evaluations including appropriate sensitivity analysis. Studies in related areas on institutional and legal, organizational, environmental, materials control and other essential aspects have also been made. The material developed during the course of this Study would enable any group of interested Member States to examine and work out alternative strategies pertinent to their present and projected nuclear fuel cycle needs, as well as evolve institutional, legal and other appropriate frameworks or agreements for the establishment of fuel cycle centers on a multinational cooperative basis

  4. Overview of HTGR fuel recycle

    International Nuclear Information System (INIS)

    Notz, K.J.

    1976-01-01

    An overview of HTGR fuel recycle is presented, with emphasis placed on reprocessing and fuel kernel refabrication. Overall recycle operations include (1) shipment and storage, (2) reprocessing, (3) refabrication, (4) waste handling, and (5) accountability and safeguards

  5. Beneficial reuse `96: The fourth annual conference on the recycle and reuse of radioactive scrap metal

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-01

    From October 22-24, 1996 the University of Tennessee`s Energy, Environment and Resources Center and the Oak Ridge National Laboratory`s Center for Risk Management cosponsored Beneficial Reuse `96: The Fourth Annual Conference on the Recycle and Reuse of Radioactive Materials. Along with the traditional focus on radioactive scrap metals, this year`s conference included a wide range of topics pertaining to naturally occurring radioactive materials (NORM), and contaminated concrete reuse applications. As with previous Beneficial Reuse conferences, the primary goal of this year`s conference was to bring together stakeholder representatives for presentations, panel sessions and workshops on significant waste minimization issues surrounding the recycle and reuse of contaminated metals and other materials. A wide range of industry, government and public stakeholder groups participated in this year`s conference. An international presence from Canada, Germany and Korea helped to make Beneficial Reuse `96 a well-rounded affair. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

  6. Recycling of spent hydroprocessing catalysts: EURECAT technology

    Energy Technology Data Exchange (ETDEWEB)

    Berrebi, G.; Dufresne, P.; Jacquier, Y. (EURECAT-European Reprocessing Catalysts, La Voulte sur Rhone (France))

    1994-04-01

    Disposal of spent catalyst is a growing concern for all refiners. Environmental regulations are becoming stricter and stricter and there are State recommendations to develop disposal routes which would emphasize recycling as much as possible, and processing the wastes as near as possible to the production center. In this context, EURECAT has developed a recycling process for the hydroprocessing catalysts used in the oil refineries (NiMo, CoMo, NiW on alumina or mixed alumina silica). The process starts with a regeneration of the catalyst to eliminate hydrocarbons, carbon and sulfur. After a caustic roasting, the material is leached to obtain a solution containing mainly molybdenum (or tungsten) and vanadium, and a solid containing essentially alumina, cobalt and/or nickel. Molybdenum and vanadium are separated by an ion exchange resin technique. The solid is processed in an arc furnace to separate the alumina. Nickel and cobalt are separated by conventional solvent extraction to obtain pure metal. Alumina is disposed of as an inert slag. The strength of the process lies in the combination of proven technologies applied by companies whose reliability in their respective field is well known. The aspects concerning spent catalyst handling, packaging and transport are also discussed. 13 refs., 2 figs., 2 tabs.

  7. Rasch Analysis of the Locus-of-Hope Scale. Brief Report

    Science.gov (United States)

    Gadiana, Leny G.; David, Adonis P.

    2015-01-01

    The Locus-of-Hope Scale (LHS) was developed as a measure of the locus-of-hope dimensions (Bernardo, 2010). The present study adds to the emerging literature on locus-of-hope by assessing the psychometric properties of the LHS using Rasch analysis. The results from the Rasch analyses of the four subscales of LHS provided evidence on the…

  8. Preparing Attitude Scale to Define Students' Attitudes about Environment, Recycling, Plastic and Plastic Waste

    Science.gov (United States)

    Avan, Cagri; Aydinli, Bahattin; Bakar, Fatma; Alboga, Yunus

    2011-01-01

    The aim of this study is to introduce an attitude scale in order to define students? attitudes about environment, recycling, plastics, plastic waste. In this study, 80 attitude sentences according to 5-point Likert-type scale were prepared and applied to 492 students of 6th grade in the Kastamonu city center of Turkey. The scale consists of…

  9. Sustaining the environment through recycling: an empirical study.

    Science.gov (United States)

    Ramayah, T; Lee, Jason Wai Chow; Lim, Shuwen

    2012-07-15

    This paper examines the determinants of recycling behaviour among 200 university students from the perspective of the theory of planned behaviour (TPB). Data was analysed using Structural Equation Modelling technique. Findings indicate that environmental awareness was significantly related to attitude towards recycling, whilst attitude and social norms had significant impact on recycling behaviour. However, convenience and cost of recycling were not significant reasons for recycling. The study has enhanced the understanding of the determinants of recycling behaviour and has implications for schools and governmental agencies in educating and encouraging positive recycling behaviour. It also confirms the appropriateness of the TPB in examining studies of this nature. Further suggestions for future research are offered. Copyright © 2012 Elsevier Ltd. All rights reserved.

  10. Recycling fusion materials

    International Nuclear Information System (INIS)

    Ooms, L.

    2005-01-01

    The inherent safety and environmental advantages of fusion power in comparison with other energy sources play an important role in the public acceptance. No waste burden for future generations is therefore one of the main arguments to decide for fusion power. The waste issue has thus been studied in several documents and the final conclusion of which it is stated that there is no permanent disposal waste needed if recycling is applied. But recycling of fusion reactor materials is far to be obvious regarding mostly the very high specific activity of the materials to be handled, the types of materials and the presence of tritium. The main objective of research performed by SCK-CEN is to study the possible ways of recycling fusion materials and analyse the challenges of the materials management from fusion reactors, based on current practices used in fission reactors and the requirements for the manufacture of fusion equipment

  11. Recycling of polymers: a review.

    Science.gov (United States)

    Ignatyev, Igor A; Thielemans, Wim; Vander Beke, Bob

    2014-06-01

    Plastics are inexpensive, easy to mold, and lightweight. These and many other advantages make them very promising candidates for commercial applications. In many areas, they have substantially suppressed traditional materials. However, the problem of recycling still is a major challenge. There are both technological and economic issues that restrain the progress in this field. Herein, a state-of-art overview of recycling is provided together with an outlook for the future by using popular polymers such as polyolefins, poly(vinyl chloride), polyurethane, and poly(ethylene terephthalate) as examples. Different types of recycling, primary, secondary, tertiary, quaternary, and biological recycling, are discussed together with related issues, such as compatibilization and cross-linking. There are various projects in the European Union on research and application of these recycling approaches; selected examples are provided in this article. Their progress is mirrored by granted patents, most of which have a very limited scope and narrowly cover certain technologies. Global introduction of waste utilization techniques to the polymer market is currently not fully developed, but has an enormous potential. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. HOPE: Just-in-time Python compiler for astrophysical computations

    Science.gov (United States)

    Akeret, Joel; Gamper, Lukas; Amara, Adam; Refregier, Alexandre

    2014-11-01

    HOPE is a specialized Python just-in-time (JIT) compiler designed for numerical astrophysical applications. HOPE focuses on a subset of the language and is able to translate Python code into C++ while performing numerical optimization on mathematical expressions at runtime. To enable the JIT compilation, the user only needs to add a decorator to the function definition. By using HOPE, the user benefits from being able to write common numerical code in Python while getting the performance of compiled implementation.

  13. Long-term aging of recycled binders : [summary].

    Science.gov (United States)

    2015-10-01

    At 80 million tons a year representing more than 80% of all milled asphalt pavement : asphalt paving is Americas most recycled material. Asphalt can be recycled in place, which is : very cost effective; however, aging of recycled binder ca...

  14. Translating Music into Hope | NIH MedlinePlus the Magazine

    Science.gov (United States)

    ... contents Translating Music into Hope Follow us Translating Music into Hope Black Eyed Peas’ Taboo talks about ... for years as a member of the hit music group Black Eyed Peas. He shares his recent ...

  15. The Relationship between Hope and Self-Esteem in Patients with Leukemia

    Science.gov (United States)

    Parvan, Kobra; Jabbarzadeh Tabrizi, Faranak; Rahmani, Azad; Ghojazadeh, Morteza; Azadi, Arman; Golchin, Mehri

    2015-01-01

    Introduction: Patients with hematologic malignancies often experience many emotional reactions which are different based on patient’s culture. Indeed culture determines the different ways that patients understand cancer. Accordingly, the aim of this study was to determine the relationship of self-esteem and hope among Iranian cancer patients. Methods: This descriptive-correlational study was undertaken among 85 leukemic patients admitted to Shahid Ghazi hospital in East-Azerbaijan province, Iran. They were selected using consecutive sampling method. Persian form of Hearth Hope Index and Coppersmith Self-Esteem Inventory were used to identify patients’ hope and self-esteem. The data were analyzed using SPSS version 13.0. Results: The overall scores of hope and self-esteem were 33.05 (5.24) and 94.61 (11.51), respectively. There was a positive correlation between hope and self-esteem (rs = 0.73, n = 85, P self-esteem and hope relationship could be similar in different cultures. The findings of this study indicate that nurses could be helpful through designing and implementing appropriate educational programs in order to enhance hope and self-esteem of leukemia patients. PMID:26464838

  16. Hope and fatigue in chronic illness: The role of perceived stress.

    Science.gov (United States)

    Hirsch, Jameson K; Sirois, Fuschia M

    2016-04-01

    Fatigue is a debilitating symptom of chronic illness that is deleteriously affected by perceived stress, a process particularly relevant to inflammatory disease. Hopefulness, a goal-based motivational construct, may beneficially influence stress and fatigue, yet little research has examined these associations. We assessed the relation between hope and fatigue, and the mediating effect of stress, in individuals with fibromyalgia, arthritis, and inflammatory bowel disease. Covarying age, sex, and pain, stress partially mediated the association between hope and fatigue; those with greater hope reported less stress and consequent fatigue. Therapeutically, bolstering hope may allow proactive management of stressors, resulting in less fatigue. © The Author(s) 2014.

  17. Waste management considerations in HTGR recycle operations

    International Nuclear Information System (INIS)

    Pence, D.T.; Shefcik, J.J.; Heath, C.A.

    1975-01-01

    Waste management considerations in the recycle of HTGR fuel are different from those encountered in the recycle of LWR fuel. The types of waste associated with HTGR recycle operations are discussed, and treatment methods for some of the wastes are described

  18. Reaping a Harvest of Hope - Continuum Magazine | NREL

    Science.gov (United States)

    Reaping a Harvest of Hope On May 4, 2007, an EF-5 tornado-the highest rating of tornados-tore Reaping a Harvest of Hope Five years after a devastating tornado, Greensburg, Kansas, has new energy and a city also relied on NREL's life-cycle cost analysis and its extensive energy project development and

  19. Concrete Waste Recycling Process for High Quality Aggregate

    International Nuclear Information System (INIS)

    Ishikura, Takeshi; Fujii, Shin-ichi

    2008-01-01

    Large amount of concrete waste generates during nuclear power plant (NPP) dismantling. Non-contaminated concrete waste is assumed to be disposed in a landfill site, but that will not be the solution especially in the future, because of decreasing tendency of the site availability and natural resources. Concerning concrete recycling, demand for roadbeds and backfill tends to be less than the amount of dismantled concrete generated in a single rural site, and conventional recycled aggregate is limited of its use to non-structural concrete, because of its inferior quality to ordinary natural aggregate. Therefore, it is vital to develop high quality recycled aggregate for general uses of dismantled concrete. If recycled aggregate is available for high structural concrete, the dismantling concrete is recyclable as aggregate for industry including nuclear field. Authors developed techniques on high quality aggregate reclamation for large amount of concrete generated during NPP decommissioning. Concrete of NPP buildings has good features for recycling aggregate; large quantity of high quality aggregate from same origin, record keeping of the aggregate origin, and little impurities in dismantled concrete such as wood and plastics. The target of recycled aggregate in this development is to meet the quality criteria for NPP concrete as prescribed in JASS 5N 'Specification for Nuclear Power Facility Reinforced Concrete' and JASS 5 'Specification for Reinforced Concrete Work'. The target of recycled aggregate concrete is to be comparable performance with ordinary aggregate concrete. The high quality recycled aggregate production techniques are assumed to apply for recycling for large amount of non-contaminated concrete. These techniques can also be applied for slightly contaminated concrete dismantled from radiological control area (RCA), together with free release survey. In conclusion: a technology on dismantled concrete recycling for high quality aggregate was developed

  20. What do we know about metal recycling rates?

    Science.gov (United States)

    Graedel, T.E.; Allwood, J.; Birat, J.-P.; Buchert, M.; Hageluken, C.; Reck, B.K.; Sibley, S.F.; Sonnemann, G.

    2011-01-01

    The recycling of metals is widely viewed as a fruitful sustainability strategy, but little information is available on the degree to which recycling is actually taking place. This article provides an overview on the current knowledge of recycling rates for 60 metals. We propose various recycling metrics, discuss relevant aspects of recycling processes, and present current estimates on global end-of-life recycling rates (EOL-RR; i.e., the percentage of a metal in discards that is actually recycled), recycled content (RC), and old scrap ratios (OSRs; i.e., the share of old scrap in the total scrap flow). Because of increases in metal use over time and long metal in-use lifetimes, many RC values are low and will remain so for the foreseeable future. Because of relatively low efficiencies in the collection and processing of most discarded products, inherent limitations in recycling processes, and the fact that primary material is often relatively abundant and low-cost (which thereby keeps down the price of scrap), many EOL-RRs are very low: Only for 18 metals (silver, aluminum, gold, cobalt, chromium, copper, iron, manganese, niobium, nickel, lead, palladium, platinum, rhenium, rhodium, tin, titanium, and zinc) is the EOL-RR above 50% at present. Only for niobium, lead, and ruthenium is the RC above 50%, although 16 metals are in the 25% to 50% range. Thirteen metals have an OSR greater than 50%. These estimates may be used in considerations of whether recycling efficiencies can be improved; which metric could best encourage improved effectiveness in recycling; and an improved understanding of the dependence of recycling on economics, technology, and other factors. ?? 2011 by Yale University.

  1. Energetic conditions of effective recycling of composite castings

    OpenAIRE

    J. Jackowski

    2009-01-01

    The most reasonable way of recycling the metal composite materials consists in separation of the components. In case of the composites with saturated reinforcement it is the only recycling method. The process of separation of the components always undergoes in the presence of an additional liquid phase called a recycling medium. In a three-phase system including the material of composite reinforcement – liquid composite matrix – liquid recycling medium, an important role for the recycling pro...

  2. Zero Temperature Hope Calculations

    International Nuclear Information System (INIS)

    Rozsnyai, B. F.

    2002-01-01

    The primary purpose of the HOPE code is to calculate opacities over a wide temperature and density range. It can also produce equation of state (EOS) data. Since the experimental data at the high temperature region are scarce, comparisons of predictions with the ample zero temperature data provide a valuable physics check of the code. In this report we show a selected few examples across the periodic table. Below we give a brief general information about the physics of the HOPE code. The HOPE code is an ''average atom'' (AA) Dirac-Slater self-consistent code. The AA label in the case of finite temperature means that the one-electron levels are populated according to the Fermi statistics, at zero temperature it means that the ''aufbau'' principle works, i.e. no a priory electronic configuration is set, although it can be done. As such, it is a one-particle model (any Hartree-Fock model is a one particle model). The code is an ''ion-sphere'' model, meaning that the atom under investigation is neutral within the ion-sphere radius. Furthermore, the boundary conditions for the bound states are also set at the ion-sphere radius, which distinguishes the code from the INFERNO, OPAL and STA codes. Once the self-consistent AA state is obtained, the code proceeds to generate many-electron configurations and proceeds to calculate photoabsorption in the ''detailed configuration accounting'' (DCA) scheme. However, this last feature is meaningless at zero temperature. There is one important feature in the HOPE code which should be noted; any self-consistent model is self-consistent in the space of the occupied orbitals. The unoccupied orbitals, where electrons are lifted via photoexcitation, are unphysical. The rigorous way to deal with that problem is to carry out complete self-consistent calculations both in the initial and final states connecting photoexcitations, an enormous computational task. The Amaldi correction is an attempt to address this problem by distorting the

  3. Is Municipal Solid Waste Recycling Economically Efficient?

    Science.gov (United States)

    Lavee, Doron

    2007-12-01

    It has traditionally been argued that recycling municipal solid waste (MSW) is usually not economically viable and that only when externalities, long-term dynamic considerations, and/or the entire product life cycle are taken into account, recycling becomes worthwhile from a social point of view. This article explores the results of a wide study conducted in Israel in the years 2000 2004. Our results reveal that recycling is optimal more often than usually claimed, even when externality considerations are ignored. The study is unique in the tools it uses to explore the efficiency of recycling: a computer-based simulation applied to an extensive database. We developed a simulation for assessing the costs of handling and treating MSW under different waste-management systems and used this simulation to explore possible cost reductions obtained by designating some of the waste (otherwise sent to landfill) to recycling. We ran the simulation on data from 79 municipalities in Israel that produce over 60% of MSW in Israel. For each municipality, we were able to arrive at an optimal method of waste management and compare the costs associated with 100% landfilling to the costs born by the municipality when some of the waste is recycled. Our results indicate that for 51% of the municipalities, it would be efficient to adopt recycling, even without accounting for externality costs. We found that by adopting recycling, municipalities would be able to reduce direct costs by an average of 11%. Through interviews conducted with representatives of municipalities, we were also able to identify obstacles to the utilization of recycling, answering in part the question of why actual recycling levels in Israel are lower than our model predicts they should be.

  4. India's ship recycling trade-off

    NARCIS (Netherlands)

    Worrell, E.; Athanasopoulou, V.

    2014-01-01

    The special nature of India's steel industry lends particular importance to ship recycling as a source of scrap. Ship recycling in upgraded 'green' facilities can substitute other 'dirty' ironmaking processes, resulting in energy savings and air pollutant emission reductions for the Indian steel

  5. Hope, Coping, and Quality of Life in Adults with Myasthenia Gravis.

    Science.gov (United States)

    Koopman, Wilma J; LeBlanc, Nicole; Fowler, Sue; Nicolle, Michael W; Hulley, Denise

    2016-01-01

    Myasthenia gravis significantly impacts quality of life. However, the relationship between hope, coping, and quality of life (QOL)in myasthenia patients has not been studied (Kulkantrakorn & Jarungkiatkul, 2009; Raggi et al., 2010). The aim of this study was to explore the relationship between hope, coping, and quality of life in adults with myasthenia gravis. Subjects with MG (n = 100) completed six questionnaires, including a demographic profile, the Myasthenia Gravis Activities of Daily Living Scale (MG-ADL), Herth Hope Index (HHI), Jalowiec Coping Scale (JCS), Myasthenia Gravis Quality-of-Life Scale (MG-QOL15), and Short Form Health Survey (SF-36v2). Mean hope scores indicated a high level of hope. An optimistic coping style was the most common and effective coping strategy identified by subjects. Positive thinking and humour were also frequently used strategies. Participants identified quality of life as good tolerability, above general population mental well-being, and below general populationphysical well-being. Participants who identified good quality of life had low scores on the MG-QOL15 scale and high scores on the SF36v2. Hope and independence for activities of daily living were found to correlate with improved quality of life and mental well-being(p life in the relationship between hope and coping. Hope and coping were not important factors for well-being or quality of life. Nurses caring for adults with myasthenia gravis should use interventions that continue to support hope, quality of life, and coping throughout the unpredictable and chronic course of MG.

  6. Mox fuels recycling

    International Nuclear Information System (INIS)

    Gay, A.

    1998-01-01

    This paper will firstly emphasis that the first recycling of plutonium is already an industrial reality in France thanks to the high degree of performance of La Hague and MELOX COGEMA's plants. Secondly, recycling of spent Mixed OXide fuel, as a complete MOX fuel cycle, will be demonstrated through the ability of the existing plants and services which have been designed to proceed with such fuels. Each step of the MOX fuel cycle concept will be presented: transportation, reception and storage at La Hague and steps of spent MOX fuel reprocessing. (author)

  7. Recycling of Reinforced Plastics

    Science.gov (United States)

    Adams, R. D.; Collins, Andrew; Cooper, Duncan; Wingfield-Digby, Mark; Watts-Farmer, Archibald; Laurence, Anna; Patel, Kayur; Stevens, Mark; Watkins, Rhodri

    2014-02-01

    This work has shown is that it is possible to recycle continuous and short fibre reinforced thermosetting resins while keeping almost the whole of the original material, both fibres and matrix, within the recyclate. By splitting, crushing hot or cold, and hot forming, it is possible to create a recyclable material, which we designate a Remat, which can then be used to remanufacture other shapes, examples of plates and tubes being demonstrated. Not only can remanufacturing be done, but it has been shown that over 50 % of the original mechanical properties, such as the E modulus, tensile strength, and interlaminar shear strength, can be retained. Four different forms of composite were investigated, a random mat Glass Fibre Reinforced Plastic (GFRP) bathroom component and boat hull, woven glass and carbon fibre cloth impregnated with an epoxy resin, and unidirectional carbon fibre pre-preg. One of the main factors found to affect composite recyclability was the type of resin matrix used in the composite. Thermoset resins tested were shown to have a temperature range around the Glass Transition Temperature (Tg) where they exhibit ductile behaviour, hence aiding reforming of the material. The high-grade carbon fibre prepreg was found to be less easy to recycle than the woven of random fibre laminates. One method of remanufacturing was by heating the Remat to above its glass transition temperature, bending it to shape, and then cooling it. However, unless precautions are taken, the geometric form may revert. This does not happen with the crushed material.

  8. Restoring Hope: You Can Help Save A Life

    Science.gov (United States)

    Department of Defense Submit Search Restoring Hope Sep. 1, 2010 You Can Help Save A Life More Focus Needed to of Staff Videos Pentagon Channel Restoring Hope: 90 min. Special - Part 1 | Part 2 More Pentagon Prevention Month: Marine Corps Team Helps Save Lives. I Will Never Quit on Life Sept.8, 2010 - Mrs. Mullen on

  9. Hope as a Political Virtue | Moellendorf | Philosophical Papers

    African Journals Online (AJOL)

    ... understand why it is a political virtue of persons. I also argue that securing the institutional bases of hope is a virtue of state institutions, particularly in states in transition from severe injustice. And, finally, when the bases are secure, a person who fails to hope for the political future is in that regard prima facie blameworthy.

  10. [Hope as psychological resource for nurturant professionals (medicine case study)].

    Science.gov (United States)

    Водопьянова, Наталия Е; Чикер, Вера А; Потявина, Валерия В

    In the article, the issues concerning hope, which is one of the most important resources for specialists of many nurturant professions, are observed. The theoretical analysis of hope and its categorization from the perspective of subjective and resource-based view is given. The special scientific and practical interest to human subjective and personal resources is determined by their unique role not only in human life support, but also in overcoming hard situations and extreme obstacles, including crisis situations in professional activity, with the example of the profession of a doctor. The aim of the empirical research is studying the correlation between hope and such manifestations of subjective regulations medical practice as inner subjective control and failure avoidance motivation. 120 doctors (60 men and 60 women) working in St. Petersburg hospitals took part in the research. Several research methods were used, such as 'Resource map' application form, R. Snyder's hope scale adapted by K. Muzdybayev, 'Subjective control level' method by E. Bazhin, E. Golynkina and L. Etkind, 'Failure avoidance motivation' method by T. Ehlers. Doctors think that Hope and Optimism are among important components of their professional practice, together with willing features helping them to reach their goals (such as persistence, patience, eagerness, insistence and endurance) and such personal qualities as self-assuredness, motion control in different situations, ability to solve hard problems. According the data of correlation and regression analyses, the anticipation that hope is determined by high level of inner control locus and low failure avoidance motivation (responsibility for patients' lives) within medical practice. Most doctors have average or high level of hope, which lets determine this personal disposition quality as one of the important ones for this profession. Being the positive result of professional practice and not depending on the doctors' sex and

  11. 76 FR 71861 - America Recycles Day, 2011

    Science.gov (United States)

    2011-11-18

    ... electronics annually, and without following proper recycling and management practices, the disposal of our old..., and prevent the recovery and reuse of valuable resources. For the well- being of our people and our..., management, and recycling that will accelerate our burgeoning electronics recycling market and create jobs...

  12. On the logistics of recycling : an introduction

    NARCIS (Netherlands)

    Flapper, S.D.P.

    1993-01-01

    An overview is given of the different logistic aspects of recycling, where recycling denotes "All the activities required for the reuse of materials and (semi-)finished products after they are no longer used by their last user." Special attention is paid to the forced recycling of durable

  13. Hydrogen recycle modeling in transport codes

    International Nuclear Information System (INIS)

    Howe, H.C.

    1979-01-01

    The hydrogen recycling models now used in Tokamak transport codes are reviewed and the method by which realistic recycling models are being added is discussed. Present models use arbitrary recycle coefficients and therefore do not model the actual recycling processes at the wall. A model for the hydrogen concentration in the wall serves two purposes: (1) it allows a better understanding of the density behavior in present gas puff, pellet, and neutral beam heating experiments; and (2) it allows one to extrapolate to long pulse devices such as EBT, ISX-C and reactors where the walls are observed or expected to saturate. Several wall models are presently being studied for inclusion in transport codes

  14. "Think positively": Parkinson's disease, biomedicine, and hope in contemporary Germany.

    Science.gov (United States)

    Metzler, Ingrid; Just, Paul

    2017-06-01

    Narratives of hope shape contemporary engagements with Parkinson's disease. On the one hand, a "biomedical narrative of hope" promises that biomedical research will help to transform this treatable but incurable disease into a curable one in the future. On the other hand, a more individual "illness narrative of hope" encourages patients to influence the course of Parkinson's disease by practicing self-care and positive thinking. This article asks how these two narratives of hope interact. It bases its argument on an analysis of data from 13 focus groups conducted in Germany in 2012 and 2014 with patients with Parkinson's disease and their relatives. Participants were asked to have their say on clinical trials for advanced therapies for Parkinson's disease and, while doing so, envisioned their biosocial selves in the present and the future. Three "modes of being" for patients were drawn from this body of data: a "users on stand-by" mode, an "unengaged" mode, and an "experimental pioneers" mode. Both narratives of hope were important to all three modes, yet they were mobilized at different frequencies and also had different statuses. While the biomedical narrative of hope was deemed an important "dream of the future" that participants passively supported without having to make it their own, the illness narrative of hope was a truth discourse that took an imperative form: having Parkinson's disease implied the need to maintain a positive attitude.

  15. Recycling of nonferrous metals from waste materials

    Energy Technology Data Exchange (ETDEWEB)

    Urban, A

    1982-02-01

    Recycling of metals was one of the 9 central subjects of the international symposium on 'Materials and Energy from Refuse', held in Antwerpen on October 20 to 22, 1981. Six of 65 poster sessions papers were on metal recycling; four of them discussed the recycling of nonferrous metals.

  16. Recycling behaviour in healthcare: waste handling at work.

    Science.gov (United States)

    Vogt, Joachim; Nunes, Katia R A

    2014-01-01

    This article reviews the motivational factors for environmental behaviour in general, presenting a case study on recycling disposable plastics in hospitals. Results show that 90% of over 600 employees from six analysed hospitals in Germany reported that the recycling of disposable plastics on the wards makes sense from an environmental and economic point of view. The case study reports an assessment of recycling attitudes and problems of hospital staff, mainly nurses. Employees in eco-certified hospitals were much more satisfied and reported fewer problems with the recycling system. The gender effect was significant only for saving energy, while age correlated with nearly all reported pro-environmental behaviour at home. At work, the mere introduction of a recycling system was insufficient to achieve good recycling results. Based on the study findings, recommendations are given aimed at improving the safety and sustainability of the recycling system.

  17. Space Plastic Recycling System, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Techshot's proposed Space Plastic Recycler (SPR) is an automated closed loop plastic recycling system that allows the automated conversion of disposable ISS...

  18. What hope is there for South Africa? A public theological reflection ...

    African Journals Online (AJOL)

    A public theological reflection on the role of the church as a bearer of hope for the future. ... HTS Teologiese Studies / Theological Studies ... Next, a nuanced understanding of hope is presented by adopting a public theological methodology that brings dominant theological perspectives on eschatological hope into dialogue ...

  19. Probabilistic Analysis of Structural Member from Recycled Aggregate Concrete

    Science.gov (United States)

    Broukalová, I.; Šeps, K.

    2017-09-01

    The paper aims at the topic of sustainable building concerning recycling of waste rubble concrete from demolition. Considering demands of maximising recycled aggregate use and minimising of cement consumption, composite from recycled concrete aggregate was proposed. The objective of the presented investigations was to verify feasibility of the recycled aggregate cement based fibre reinforced composite in a structural member. Reliability of wall from recycled aggregate fibre reinforced composite was assessed in a probabilistic analysis of a load-bearing capacity of the wall. The applicability of recycled aggregate fibre reinforced concrete in structural applications was demonstrated. The outcomes refer to issue of high scatter of material parameters of recycled aggregate concretes.

  20. Bottle & Can Recycling in Denmark: addressing issues and optimizing the recycling rate

    OpenAIRE

    Carnevale, Alessandro; Larsen, Lucas; Tetens, Simon W.

    2015-01-01

    The research is conducted in the landscape of environmental care and consumer behaviour. This paper explores the different dynamics revolving around the recycling of plastic bottles and aluminium cans in Denmark. The aim is to shed light on the possible impediments people might encounter when attempting to hand back their deposit marked bottle to the allocated facilities as well as illuminating what the main forces involved in encouraging or inhibiting people from recycling are. The ultimate ...

  1. Economics and recycling

    Energy Technology Data Exchange (ETDEWEB)

    Butlin, J A

    1977-06-01

    The current state of recycling technology could appear to be a question of supply and demand, first for storage, disposal, and reclamation facilities, and secondly, for reclaimed materials. If supply and demand are to be relied upon as an environmental policy tool, several conditions need to exist within the economy: supply data for storage and disposal facilities should reflect the full social cost of their use for this purpose relative to any other; demand data for the use of storage facilities must reflect the full social benefit of having waste go through one channel rather than some other; demand for and supply of reclaimed materials for recycling must reflect the full costs and benefits of rechanneling them back into production or consumption; and the markets for products competitive to recycled raw materials (mainly virgin raw materials) should reflect full social costs and benefits, as should the markets for the alternative uses of storage and disposal facilities. If these conditions are met (in addition to a few technical ones), then the problem of waste management will not arise. (MCW)

  2. The Effectiveness of Cognitive-Behavioral Therapy on Bereaved University Students' Hope

    Directory of Open Access Journals (Sweden)

    Seyyed Nahid Hosseininezhad

    2016-05-01

    Full Text Available The present research aims to study the effectiveness of cognitive-behavioral therapy (CBT on bereaved students' hope. This is an applied research of quasi-experimental type and pretest and posttest design with control group. We selected 30 bereaved university students using stratified sampling method. We used Schneider Hope Questionnaire as the pretest-posttest in the research and analyzed using the statistical method of covariance analysis. The data analysis results indicate that cognitive-behavioral therapy increases bereaved students' hope and there is a significant difference between the two groups. The results of this study show that cognitive-behavioral group therapy influences hope and increases bereaved students' hope by helping them in their emotional discharge and acceptance of death.

  3. Hope and hopelessness as predictors of suicide ideation in Hungarian college students.

    Science.gov (United States)

    Chang, Edward C

    2017-08-01

    This study investigated whether hopelessness and dispositional hope predict suicide ideation in 395 Hungarian college students. Both hopelessness and hope uniquely predicted suicide ideation, a pattern that remained unchanged even after controlling for psychological symptoms. Moreover, a significant Hopelessness × Hope interaction predicted suicide ideation. Present findings highlight how hope buffers the association between hopelessness and suicide risk in college students.

  4. Reshuffle lifts French synchrotron hopes

    CERN Multimedia

    McCabe, H

    2000-01-01

    The sacking of Claude Allegre as research minister has raised doubts over the level of France's promised participation in the construction of Diamond but reawakened French hopes that the synchrotron Soleil may now be built (1 page).

  5. The Recycler Electron Cooler

    Energy Technology Data Exchange (ETDEWEB)

    Shemyakin, A. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Prost, L. R. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

    2013-03-19

    The Recycler Electron cooler was the first (and so far, the only) cooler working at a relativistic energy (γ = 9.5). It was successfully developed in 1995-2004 and was in operation at Fermilab in 2005-2011, providing cooling of antiprotons in the Recycler ring. This paper describes the cooler, difficulties in achieving the required electron beam parameters and the ways to overcome them, cooling measurements, and details of operation.

  6. Tire recycling technologies: What is the future?

    NARCIS (Netherlands)

    Saiwari, Sitisaiyidah; van Hoek, Johannes Wilhelmus; Dierkes, Wilma K.; Noordermeer, Jacobus W.M.; Blume, Anke; Heideman, G.

    2016-01-01

    Recycling is a heavily discussed topic nowadays, and recycled tire material to be re-used for the same application is one of the spear points of current R&D activities. Regarding the immense amount of used tires, more than just one outlet for the recycled material is needed. Besides the commonly

  7. Fluorescent lamp recycling initiatives in the United States and a recycling proposal based on extended producer responsibility and product stewardship concepts.

    Science.gov (United States)

    Silveira, Geraldo Tr; Chang, Shoou-Yuh

    2011-06-01

    This paper presents an overview of mercury-containing lamp (MCL) recycling initiatives currently available in the world, especially in the United States. The majority of MCLs contain mercury which is a neurotoxin, a persistent pollutant in the environment, and can bioaccumulate in the food chain. Although there are some recycling options in the United States, collection rates are still at 23% of all potential used MCLs. This shows that citizens are either indifferent to or unaware of the recycling alternatives. On the other hand, MCL recycling seems not to be a cost-effective process and, for this reason, in the United States, take-back programmes are still sponsored only by consumers or municipalities. A few retailers have recently initiated limited take-back alternatives and manufacturers have not yet supported financially any consistent recycling alternative in the country. Considering successful experiences, this paper makes a suggestion for an MCL recycling system based on the concepts of extended producer responsibility and product stewardship. A manufacturer-importer advance recycling fee is proposed to finance the collection and recycling system while a MCL-energy recycling fee supported by the energy sector creates a lamp refund process. 'PRO Lamp', a producer responsibility organization, will manage the entire system through a widespread public-private agreement.

  8. Quantify the energy and environmental effects of using recycled asphalt and recycled concrete for pavement construction phase I : final report.

    Science.gov (United States)

    2009-08-01

    The objective of this study is to quantify the energy and environment impacts from using recycled materials : for highway construction. Specifically, when recycled asphalt pavement is re-used for producing hot mix : asphalt or when recycled concrete ...

  9. Hope and Mental Health in Young Adult College Students: An Integrative Review.

    Science.gov (United States)

    Griggs, Stephanie

    2017-02-01

    One in five young adults are diagnosed with a mental illness and many experience psychological distress during their first year of college due to new pressures in academia. The purpose of the current integrative review was to describe and synthesize hope and mental health in young adults in college. PubMed, CINAHL, and PsycINFO were searched for articles published in peer-reviewed journals from 2011-2016. Twenty empirical works were selected for inclusion and five themes emerged: (a) Hope is Associated With Improved Coping, (b) Hope is Associated With Improved Well-Being, (c) Hope is a Moderator Between Depression and Negative Life Events, (d) Hope is a Protective Factor in Suicide, and (e) Hope is a Factor in Healthy Behavior Engagement. Hope may be a protective factor in suicide and negative, self-deprecatory thinking. Further research is needed to determine if increasing hope in young adult college students will decrease the risk of suicide and non-suicidal self-injury, increase healthy behavior engagement, and improve coping and well-being. [Journal of Psychosocial Nursing and Mental Health Services, 55(2), 28-35.]. Copyright 2017, SLACK Incorporated.

  10. Transgressive Hybrids as Hopeful Monsters.

    Science.gov (United States)

    Dittrich-Reed, Dylan R; Fitzpatrick, Benjamin M

    2013-06-01

    The origin of novelty is a critical subject for evolutionary biologists. Early geneticists speculated about the sudden appearance of new species via special macromutations, epitomized by Goldschmidt's infamous "hopeful monster". Although these ideas were easily dismissed by the insights of the Modern Synthesis, a lingering fascination with the possibility of sudden, dramatic change has persisted. Recent work on hybridization and gene exchange suggests an underappreciated mechanism for the sudden appearance of evolutionary novelty that is entirely consistent with the principles of modern population genetics. Genetic recombination in hybrids can produce transgressive phenotypes, "monstrous" phenotypes beyond the range of parental populations. Transgressive phenotypes can be products of epistatic interactions or additive effects of multiple recombined loci. We compare several epistatic and additive models of transgressive segregation in hybrids and find that they are special cases of a general, classic quantitative genetic model. The Dobzhansky-Muller model predicts "hopeless" monsters, sterile and inviable transgressive phenotypes. The Bateson model predicts "hopeful" monsters with fitness greater than either parental population. The complementation model predicts both. Transgressive segregation after hybridization can rapidly produce novel phenotypes by recombining multiple loci simultaneously. Admixed populations will also produce many similar recombinant phenotypes at the same time, increasing the probability that recombinant "hopeful monsters" will establish true-breeding evolutionary lineages. Recombination is not the only (or even most common) process generating evolutionary novelty, but might be the most credible mechanism for sudden appearance of new forms.

  11. Recycling of plastic materials collected by `Duales System Deutschland (DSD)`; Werkstoffliches Recycling von Kunststoffen aus DSD-Sammlungen

    Energy Technology Data Exchange (ETDEWEB)

    Baumgaertner, D. [Lech-Elektrizitaetswerke AG, Augsburg (Germany); Heinz, H. [Lech-Elektrizitaetswerke AG, Augsburg (Germany); Hiller, W. [Lech-Elektrizitaetswerke AG, Augsburg (Germany)

    1996-01-01

    The article deals with the importance, problems and technology of plastics recycling. It gives an overview of the specific demands of plastics recyclates, the necessary process technology, and the characteristic values of materials. (orig.) [Deutsch] Es wird die Bedeutung, die Problematik und Technik des werkstofflichen Recyclings von Kunststoffen dargestellt. Dabei sind sowohl die spezifischen Anforderungen des Einsatzstoffes als Recyclingmaterial, die notwendige Verfahrenstechnik als auch die werkstofflichen Kennwerte in einer Uebersicht dargestellt. (orig.)

  12. Multi-Fluid Modeling of Low-Recycling Divertor Regimes

    International Nuclear Information System (INIS)

    Smirnov, R.D.; Pigarov, A.Y.; Krasheninnikov, S.I.; Rognlien, T.D.; Soukhanovskii, V.A.; Rensink, M.E.; Maingi, R.; Skinner, C.H.; Stotler, D.P.; Bell, R.E.; Kugel, H.W.

    2010-01-01

    The low-recycling regimes of divertor operation in a single-null NSTX magnetic configuration are studied using computer simulations with the edge plasma transport code UEDGE. The edge plasma transport properties pertinent to the low-recycling regimes are demonstrated. These include the flux-limited character of the parallel heat transport and the high plasma temperatures with the flattened profiles in the scrape-off-layer. It is shown that to maintain the balance of particle fluxes at the core interface the deuterium gas puffing rate should increase as the divertor recycling coefficient decreases. The radial profiles of the heat load to the outer divertor plate, the upstream radial plasma profiles, and the effects of the cross-field plasma transport in the low-recycling regimes are discussed. It is also shown that recycling of lithium impurities evaporating from the divertor plate at high surface temperatures can reverse the low-recycling divertor operational regime to the high-recycling one and may cause thermal instability of the divertor plate.

  13. Work Hope: The Role of Personal and Social Factors and Family Support

    Directory of Open Access Journals (Sweden)

    leila vahid dastjerdi

    2016-01-01

    Full Text Available The purpose of the present study was to investigate the related factors on work hope in University of Isfahan's Students. It was a descriptive, correlational study. The statistical samples of the study comprised of all of the students in the University of Isfahan in 2014-15. The sample including 300 students was selected through relatively stratified sampling in the University of Isfahan. The work hope scale, general self-efficacy questionnaire, differential status identity scale, time perspective questionnaires and perceived social support scale were used in collecting the data. The results of path analysis showed that family support indirectly related to work hope through social prestige and social power. Besides, family support indirectly related to self-efficacy through social power. Among the dimensions of perceived social status, social power was found to be indirectly related to work hope through self-efficacy, and social prestige found to be directly related to work hope. Further, self-efficacy was related to work hope both directly and indirectly. Among the aspects of time perspective, the present hedonistic was significantly and positively related to work hope; however, present fatalistic was significantly and negatively related to work hope. In general, the results showed that the self-efficacy, social prestige, social support, present hedonistic, present fatalistic and family support could predict work hope.

  14. Secondary resources and recycling in developing economies

    International Nuclear Information System (INIS)

    Raghupathy, Lakshmi; Chaturvedi, Ashish

    2013-01-01

    Recycling of metals extends the efficient use of minerals and metals, reduces pressure on environment and results in major energy savings in comparison to primary production. In developing economies recycling had been an integral part of industrial activity and has become a major concern due to the handling of potentially hazardous material without any regard to the occupational health and safety (OH and S) needs. With rising awareness and interest from policy makers, the recycling scenario is changing and the large scale enterprises are entering the recycling sector. There is widespread expectation that these enterprises would use the Best Available Technologies (BAT) leading to better environment management and enhanced resource recovery. The major challenge is to enhance and integrate the activities of other stakeholders in the value chain to make recycling an economically viable and profitable enterprise. This paper is an attempt to propose a sustainable model for recycling in the developing economies through integration of the informal and formal sectors. The main objective is to augment the existing practices using a scientific approach and providing better technology without causing an economic imbalance to the present practices. In this paper studies on lead acid batteries and e-waste recycling in India are presented to evolve a model for “green economy”

  15. School Recycling Programs: A Handbook for Educators.

    Science.gov (United States)

    Environmental Protection Agency, Washington, DC.

    This brochure describes some of the many recycling program options that schools can implement in their communities. It focuses on implementing actual recycling projects as a way of teaching the importance and benefits of recycling. The text examines the solid waste crisis and why Americans cannot continue to possess a disposable mentality. It…

  16. Proceedings of the workshop on elementary process in hydrogen recycling

    International Nuclear Information System (INIS)

    Itikawa, Yukikazu.

    1982-03-01

    On September 7 and 8, 1981, a workshop was held at the Institute of Plasma Physics to review the state of the art of the study of elementary processes in hydrogen recycling in fusion reactors. The processes considered are reflection, adsorption, trapping, particle-induced emission, chemical sputtering, and diffusion in metals. The present report is the proceedings of the workshop and contains rather comprehensive reviews each on the processes considered. The workshop was held as part of the joint research program of data compilation at the Research Information Center, Institute of Plasma Physics. (author)

  17. The Relationship between Hope and Self-Esteem in Patients with Leukemia

    Directory of Open Access Journals (Sweden)

    Kobra Parvan

    2015-09-01

    Full Text Available Introduction: Patients with hematologic malignancies often experience many emotional reactions which are different based on patient’s culture. Indeed culture determines the different ways that patients understand cancer. Accordingly, the aim of this study was to determine the relationship of self-esteem and hope among Iranian cancer patients. Methods: This descriptive-correlational study was undertaken among 85 leukemic patients admitted to Shahid Ghazi hospital in East-Azerbaijan province, Iran. They were selected using consecutive sampling method. Persian form of Hearth Hope Index and Coppersmith Self-Esteem Inventory were used to identify patients’ hope and self-esteem. The data were analyzed using SPSS version 13.0. Results: The overall scores of hope and self-esteem were 33.05 (5.24 and 94.61 (11.51, respectively. There was a positive correlation between hope and self-esteem (rs = 0.73, n = 85, P < 0.001.Conclusion: Although culture determines the different ways that patients understand cancer, but it seems that the self-esteem and hope relationship could be similar in different cultures. The findings of this study indicate that nurses could be helpful through designing and implementing appropriate educational programs in order to enhance hope and self-esteem of leukemia patients.

  18. Requirements for the recycling of hazardous waste

    International Nuclear Information System (INIS)

    Petts, M.

    1990-09-01

    The regulatory status of materials destined to be recycled is not always clear. There have been numerous questions from DOE Field Elements regarding the applicability of the Resource Conservation and Recovery Act (RCRA) to certain materials that can be recycled. The Office of Environmental Guidance, RCRA/CERCLA Division, has responded to questions relating to the RCRA regulations as they apply to materials that are recycled or are destined for recycling. Additional regulatory requirements for these materials may be promulgated upon the reauthorization of RCRA (e.g., regulation of used oil). Additional EH-23 information Briefs will be issued as these regulations develop. The Office of Environment, Safety and Health has convened a workshop to establish DOE's position on a number of issues associated with mixed waste and materials management, several relative to recycling

  19. Software recycling at the Hanford Site

    International Nuclear Information System (INIS)

    HINKELMAN, K.C.

    1999-01-01

    The Hanford Site was the first Department of Energy (DOE) complex to recycle excess software rather than dispose of it in the landfill. This plan, which took over a year to complete, was reviewed for potential legal conflicts, which could arise from recycling rather than disposal of software. It was determined that recycling was an approved method of destruction and therefore did not conflict with any of the licensing agreements that Hanford had with the software manufacturers. The Hanford Recycling Program Coordinator combined efforts with Pacific Northwest National Laboratory (PNNL) to recycle all Hanford software through a single contract, which went out for bid in January 1995. It was awarded to GreenDisk, Inc. located in Woodinville Washington and implemented in March 1995. The contract was later re-bid and awarded to EcoDisWGreenDisk in December 1998. The new contract included materials such as; software manuals, diskettes, tyvek wrapping, cardboard and paperboard packaging, compact disks (CDs), videotapes, reel-to-reel tapes, magnetic tapes, audio tapes, and many other types of media

  20. Spaces of hope? Youth perspectives on health and wellness in indigenous communities.

    Science.gov (United States)

    Wood, Lydia; Kamper, David; Swanson, Kate

    2018-03-01

    This article addresses an apparent paradox between academic and policy depictions of American Indian reservations as "broken" and "unhealthy" places, and Indigenous youth perceptions of reservations as spaces of "health" and "wellness." Public health literature often frames reservations as damaged, health-denying places, chronicling the extraordinarily high rates of suicide, substance abuse, as well as vast health disparities. Despite these dire statistics, our research with Native youth in San Diego County found that young people chose to primarily emphasize their positive experiences with, and attachments to, their reservations. In this article, we share strength- and desire-based narratives to explore how reservations can serve as spaces of wellness for Indigenous youth, despite ongoing settler colonial harm. We seek to expand the discussion on the unintended consequences of deficit-centered scholarship by arguing that health research should also engage with the narratives of hope and desire that are reflective of the way many Native youth feel about their communities. In this article, we urge scholars and practitioners to rethink how we conduct health research to include methodologies that listen to the narratives and experiences of those who, day in and day out, navigate settler colonial landscapes, while continuing to create spaces of hope and healing. Copyright © 2018 Elsevier Ltd. All rights reserved.

  1. Model-Based Diagnosis and Prognosis of a Water Recycling System

    Science.gov (United States)

    Roychoudhury, Indranil; Hafiychuk, Vasyl; Goebel, Kai Frank

    2013-01-01

    A water recycling system (WRS) deployed at NASA Ames Research Center s Sustainability Base (an energy efficient office building that integrates some novel technologies developed for space applications) will serve as a testbed for long duration testing of next generation spacecraft water recycling systems for future human spaceflight missions. This system cleans graywater (waste water collected from sinks and showers) and recycles it into clean water. Like all engineered systems, the WRS is prone to standard degradation due to regular use, as well as other faults. Diagnostic and prognostic applications will be deployed on the WRS to ensure its safe, efficient, and correct operation. The diagnostic and prognostic results can be used to enable condition-based maintenance to avoid unplanned outages, and perhaps extend the useful life of the WRS. Diagnosis involves detecting when a fault occurs, isolating the root cause of the fault, and identifying the extent of damage. Prognosis involves predicting when the system will reach its end of life irrespective of whether an abnormal condition is present or not. In this paper, first, we develop a physics model of both nominal and faulty system behavior of the WRS. Then, we apply an integrated model-based diagnosis and prognosis framework to the simulation model of the WRS for several different fault scenarios to detect, isolate, and identify faults, and predict the end of life in each fault scenario, and present the experimental results.

  2. Model institutional infrastructures for recycling of photovoltaic modules

    Energy Technology Data Exchange (ETDEWEB)

    Reaven, S.J.; Moskowitz, P.D.; Fthenakis, V.

    1996-01-01

    How will photovoltaic modules (PVMS) be recycled at the end of their service lives? This question has technological and institutional components (Reaven, 1994a). The technological aspect concerns the physical means of recycling: what advantages and disadvantages of the several existing and emerging mechanical, thermal, and chemical recycling processes and facilities merit consideration? The institutional dimension refers to the arrangements for recycling: what are the operational and financial roles of the parties with an interest in PVM recycling? These parties include PVM manufacturers, trade organizations; distributors, and retailers; residential, commercial, and utility PVM users; waste collectors, transporters, reclaimers, and reclaimers; and governments.

  3. Platinum recycling in the United States in 1998

    Science.gov (United States)

    Hilliard, Henry E.

    2001-01-01

    In the United States, catalytic converters are the major source of secondary platinum for recycling. Other sources of platinum scrap include reforming and chemical process catalysts. The glass industry is a small but significant source of platinum scrap. In North America, it has been estimated that in 1998 more than 20,000 kilograms per year of platinum-group metals from automobile catalysts were available for recycling. In 1998, an estimated 7,690 kilograms of platinum were recycled in the United States. U.S. recycling efficiency was calculated to have been 76 percent in 1998; the recycling rate was estimated at 16 percent.

  4. A mixed method thematic review: the importance of hope to the dying patient.

    Science.gov (United States)

    Broadhurst, Kathleen; Harrington, Ann

    2016-01-01

    To review the literature and investigate the meaning of hope to patients receiving palliative care and to examine the themes that foster hope in those patients. Hope is often linked to the future and is a significant factor for patients dealing with adversity, such as a terminal illness. The concept of hope is underreported in the literature. Mixed method thematic review. CINAHL, Scopus, PsychINFO, Informit, PubMed, Science Direct, ProQuest, Web of Science and Google Scholar online databases were searched using keywords and inclusion and exclusion criteria published between 2003-2013. Twelve qualitative articles were thematically analysed using Braun and Clarke's (2006) steps to ascertain major themes and sub-themes. On analysis, the remaining three mixed method studies were found to reflect the themes generated by the qualitative studies. Seven key themes that increased hope were found: disease status; positive personal relationships; positive character traits; quality of life; setting and achieving goals; spirituality/religion; and hope after death. The importance of hope to dying patients was established. Hope is a very complex and personal phenomena requiring hope-enhancing strategies to be individualized. More research is needed with groups whose culture, youth or type of illness may affect their ability to foster and maintain hope. © 2015 John Wiley & Sons Ltd.

  5. The Effect of Stress Management Training on Hope in Hemodialysis Patients.

    Science.gov (United States)

    Poorgholami, Farzad; Abdollahifard, Sareh; Zamani, Marzieh; Kargar Jahromi, Marzieh; Badiyepeyma Jahromi, Zohreh

    2015-11-18

    Chronic renal failure exposes patients to the risk of several complications, which will affect every aspect of patient's life, and eventually his hope. This study aims to determine the effect of stress management group training on hope in hemodialysis patients. In this quasi-experimental single-blind study, 50 patients with renal failure undergoing hemodialysis at Motahari Hospital in Jahrom were randomly divided into stress management training and control groups. Sampling was purposive, and patients in stress management training group received 60-minute in-person training by the researcher (in groups of 5 to 8 patients) before dialysis, over 5 sessions, lasting 8 weeks, and a researcher-made training booklet was made available to them in the first session. Patients in the control group received routine training given to all patients in hemodialysis department. Patients' hope was recorded before and after intervention. Data collection tools included demographic details form, checklist of problems of hemodialysis patients and Miller hope scale (MHS). Data were analyzed in SPSS-18, using Chi-square, one-way analysis of variance, and paired t-test. Fifty patients were studied in two groups of 25 each. No significant difference was observed between the two groups in terms of age, gender, or hope before intervention. After 8 weeks of training, hope reduced from 95.92±12.63 to 91.16±11.06 (P=0.404) in the control group, and increased from 97.24±11.16 to 170.96±7.99 (P=0.001) in the stress management training group. Significant differences were observed between the two groups in hope scores after the intervention. Stress management training by nurses significantly increased hope in hemodialysis patients. This low cost intervention can be used to improve hope in hemodialysis patients.

  6. Radioactive materials in recycled metals.

    Science.gov (United States)

    Lubenau, J O; Yusko, J G

    1995-04-01

    In recent years, the metal recycling industry has become increasingly aware of an unwanted component in metal scrap--radioactive material. Worldwide, there have been 35 instances where radioactive sources were unintentionally smelted in the course of recycling metal scrap. In some cases contaminated metal consumer products were distributed internationally. In at least one case, serious radiation exposures of workers and the public occurred. Radioactive material appearing in metal scrap includes sources subject to licensing under the Atomic Energy Act and also naturally occurring radioactive material. U.S. mills that have smelted a radioactive source face costs resulting from decontamination, waste disposal, and lost profits that range from 7 to 23 million U.S. dollars for each event. To solve the problem, industry and the government have jointly undertaken initiatives to increase awareness of the problem within the metal recycling industry. Radiation monitoring of recycled metal scrap is being performed increasingly by mills and, to a lesser extent, by scrap processors. The monitoring does not, however, provide 100% protection. Improvements in regulatory oversight by the government could stimulate improved accounting and control of licensed sources. However, additional government effort in this area must be reconciled with competing priorities in radiation safety and budgetary constraints. The threat of radioactive material in recycled metal scrap will continue for the foreseeable future and, thus, poses regulatory policy challenges for both developed and developing nations.

  7. Hope and cardiovascular health-promoting behaviour: education alone is not enough.

    Science.gov (United States)

    Feldman, David B; Sills, Jonathan R

    2013-01-01

    We investigated hope's ability to predict cardiovascular disease (CVD) knowledge and health-promoting behaviours. Snyder defined hope as the combination of goal-directed planning and motivation, and theorised that high-hope people seek knowledge relevant to goal pursuits. We surveyed 391 Latino and Asian participants undergoing CVD risk screening, nearly all immigrants to the USA. This was a particularly important sample because, in general, these populations are considered underserved and under-researched. Pre-screening hope levels were measured. After screening and education, participants rated perceived importance of behaviour change. Behaviour change (salt/fat intake, exercise, CVD information-seeking and visiting a physician) and CVD knowledge were assessed one month later by telephone. Unexpectedly, hope did not predict knowledge. However, hope predicted self-reported behaviour change, though results differed by ethnicity. Among Asian individuals, hope × knowledge predicted reduced salt/fat, CVD information-seeking and physician visits. Among Latino individuals, hope × perceived importance of diet change predicted reduced salt/fat and hope × perceived importance of exercise change predicted increased exercise.

  8. Going for increased recycling. A social cost-benefit analysis; Inzetten op meer recycling. Een maatschappelijke kosten-batenanalyse

    Energy Technology Data Exchange (ETDEWEB)

    Warringa, G.E.A.; De Bruyn, M.; Bijleveld, M.M.

    2013-05-15

    While the environmental benefits of scenarios geared to increased recycling have been convincingly demonstrated by previous studies, the question arises whether such scenarios bring economic benefits, too. This study therefore assesses the main economic effects of increased recycling in the Netherlands, providing data that can be used to advance policy development in this area. To address the main issue we performed a social cost-benefit analysis (SCBA), a welfare-theory-based tool that can be used to chart the full range of economic impacts ('welfare impacts') of a project or policy intervention. In doing so, a broad definition of welfare is adopted, encompassing not only financial and economic consequences, but also environmental and employment impacts and so on. Using SimaPro, all the environmental interventions inventoried (including energy consumption, transport and recycling process emissions) were assessed for each individual material flow, with impacts being expressed as far as possible in monetary terms to enable comparison. The main social costs of increased recycling are the higher costs for local authorities associated with separate waste collection. There is also reduced revenue for waste incinerators, because more waste will need to be imported from abroad. Finally, there are the policy costs of incentives for increased recycling and extra efforts to induce citizens to separate their waste. The latter costs were not quantified. Over and against these costs are positive welfare impacts. The main benefits are environmental, expressed monetarily in the present study in terms of avoided damage costs for society as a whole and avoided measures for securing government reduction targets. In addition, the separated waste has a value, reflected in lower processing costs. Increased recycling also creates new jobs, while recycling firms generate more profit than waste incinerators. Finally, there are the benefits accruing from greater innovation and

  9. The Role of Hope for Adolescents with a Chronic Illness: An Integrative Review.

    Science.gov (United States)

    Griggs, Stephanie; Walker, Rachel K

    2016-01-01

    Hope is a human strength essential for adolescents' enduring and coping with chronic illness however, the role of hope is not well understood in this population. This integrative review describes what is currently known about the role of hope in adolescents with a chronic illness. A methodological review using an integrative approach by R. Whittemore and K. Knafl (2005) was performed. MEDLINE via Pubmed; CINAHL; PyscINFO and Google scholar were searched for articles published in peer-reviewed journals from 1995 to 2015, using search terms 'hope and chronic illness' with age limiters for all except Google scholar (title search of "hope and adolescents"). Of the 197 studies initially retrieved: a total of 27 quantitative studies, 8 qualitative studies and 19 theoretical works were selected for review. Seven themes emerged including that hope: (i) promotes health (ii) facilitates coping and adjustment, (iii) enhances quality of life, (iv) is essential in purpose in life and illness (v) improves self-esteem, (vi) is an important factor in resilience and (vii) affects maturation. Persons reporting higher levels of hope find multiple routes to goals, view setbacks as challenges, and better manage psychological symptoms. Although theory and a limited body of empirical research to date suggest a link between hopeful thinking and physical health, the specific mechanisms remain unclear. As hope is linked to resilience, further research should explore whether adolescents with higher hope return to baseline faster than their lower hope counterparts. Copyright © 2016 Elsevier Inc. All rights reserved.

  10. Hope, emotion regulation, and psychosocial well-being in patients newly diagnosed with cancer.

    Science.gov (United States)

    Peh, Chao Xu; Kua, Ee Heok; Mahendran, Rathi

    2016-05-01

    Patients newly diagnosed with cancer are often confronted with feelings of uncertainty and life threat. A significant proportion may report impairments in psychosocial well-being. Previous studies examining protective psychological factors such as hope and emotion regulation (ER) have yet to investigate these processes concurrently within a common self-regulation framework and/or focus on newly diagnosed patients. The present study aimed to examine how hope and ER may relate to psychosocial outcomes of patients newly diagnosed with cancer. The present study used a cross-sectional design with self-report questionnaires. Participants were newly diagnosed patients (N = 101) recruited from three cancer therapy clinics in a hospital. Patients completed measures of hope, ER (cognitive reappraisal and expressive suppression), and psychosocial well-being (life satisfaction and negative affectivity). Findings showed that (1) hope and reappraisal, but not suppression, were associated with well-being and (2) the interaction between hope and reappraisal was associated with well-being; reappraisal was not associated with well-being in high hope patients, while high reappraisal was associated with better well-being in low hope patients. Individual differences in hope and reappraisal appeared to be associated with psychosocial outcomes in newly diagnosed cancer patients. Hopeful thinking appeared to benefit patients' psychosocial well-being. In addition, an interaction effect between hope and reappraisal suggested that reappraisal as an ER strategy may be particularly adaptive for patients with low hope.

  11. Reprocessing-recycling, or the application of the selective sorting and recycling policy to nuclear activities

    International Nuclear Information System (INIS)

    1998-12-01

    In France, the reprocessing of spent fuels is the solution that has been retained for the management of the end-of-cycle. The sorting of the different components of spent fuels allows the recycling of uranium and plutonium for the further production of enriched uranium and mixed oxide fuels. This paper presents Cogema's advances in this domain (facilities and plants), the transfer of Cogema's reprocessing and recycling technologies in other countries (Japan, USA, Russia), the economical and environmental advantages of the recycling of spent fuels, the economical resources provided by this activity, and the cooperation with foreign countries for the reprocessing of their spent fuels at Cogema-La Hague. (J.S.)

  12. Integration of Demilitarization Contractors and Recyclers - Collateral Benefits of On-Site Training of Recyclers

    Science.gov (United States)

    2010-07-01

    item Spherical? Wedge Shaped? Cylindrical? These items are potentially very dangerous 29 Spherical = Not Good If found in a recycling yard, don’t...touch! Call 9-1-1 BLU-63 30 Wedge Shape = Not Good If found in a recycling yard, don’t touch! Call 9-1-1 M72M43 31 Cylindrical = Not Good If found in a

  13. Students’ voice: The hopes and fears of student-teacher candidates

    Directory of Open Access Journals (Sweden)

    Shirli Shoyer

    2016-12-01

    Full Text Available It is widely claimed that learners interpret new information and experiences through their existing network of knowledge, experience, and beliefs. Research on professional identities of teachers highlight the impact of biographical factors such as teachers schooling experiences, motivations for entering teacher education programs, their initial teacher education experiences and contexts of professional practice, as influential of “construction, deconstruction and reconstruction” of teachers’ professional identities and the kind of teachers they become. The study investigates teacher education candidates’ hopes and fears concerning their future career as teachers. An open-ended questionnaire was distributed to 90 candidates in a teacher education college. The qualitative analysis identifies the domains of candidates’ hope and fears. The findings reveal that candidates expressed more hopes then fears. Their hopes and fears correspond with qualities of the “good teacher” and effective teaching. The study can support the development of prospective teachers towards expertise in teaching and assist program designers and educators in strengthening education programs by catering for students’ needs, taking into consideration their hopes and concerns.

  14. Biopsychosocial correlates of hope in Asian patients with cancer: a systematic review.

    Science.gov (United States)

    Mahendran, Rathi; Chua, Shi Min; Lim, Haikel A; Yee, Isaac J; Tan, Joyce Y S; Kua, Ee Heok; Griva, Konstadina

    2016-10-06

    To examine the factors associated with hope and hopelessness in patients with cancer in Asian countries, and the instruments used to measure hope and hopelessness. A comprehensive systematic review was conducted with search terms, including cancer, hope, hopelessness and individual Asian country names, on CINAHL, Embase, PsycINFO, PubMed and Scopus databases. Only quantitative studies on adult cancer populations in Asia examining hope or hopelessness were included. A total of 2062 unique articles were retrieved from the databases, and 32 studies were selected for inclusion in this review. Hope and hopelessness were most frequently measured with the Herth Hope Index and the Mental Adjustment to Cancer Scale, respectively. The biopsychosocial factors that were most consistently associated with hope and hopelessness included sociodemographic variables (education, employment and economic status); clinical factors (cancer stage, physical condition and symptoms); and psychosocial factors (emotional distress, social support and connections, quality of life, control or self-efficacy, as well as adjustment and resilience). There is a need for more studies from South and Southeast Asia as most studies hailed from East Asia. This review highlighted the possibility of cultural differences influencing factors related to hope, suggesting that cross-cultural studies specifically would facilitate understanding behind these variations, although future reviews on hope should also include studies on hopelessness for a comprehensive understanding of the concept. Finally, more longitudinal research could be conducted to assess whether the factors associated with hope and hopelessness change over time and disease progression. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  15. Sustaining hope as a moral competency in the context of aggressive care.

    Science.gov (United States)

    Peter, Elizabeth; Mohammed, Shan; Simmonds, Anne

    2015-11-01

    Nurses who provide aggressive care often experience the ethical challenge of needing to preserve the hope of seriously ill patients and their families without providing false hope. The purpose of this inquiry was to explore nurses' moral competence related to fostering hope in patients and their families within the context of aggressive technological care. A secondary purpose was to understand how this competence is shaped by the social-moral space of nurses' work in order to capture how competencies may reflect an adaptation to a less than ideal work environment. A critical qualitative approach was used. Fifteen graduate nursing students from various practice areas participated. After receiving ethics approval from the university, signed informed consent was obtained from participants before they were interviewed. One overarching theme 'Mediating the tension between providing false hope and destroying hope within biomedicine' along with three subthemes, including 'Reimagining hopeful possibilities', 'Exercising caution within the social-moral space of nursing' and 'Maintaining nurses' own hope', was identified, which represents specific aspects of this moral competency. This competency represents a complex, nuanced and multi-layered set of skills in which nurses must be well attuned to the needs and emotions of their patients and families, have the foresight to imagine possible future hopes, be able to acknowledge death, have advanced interpersonal skills, maintain their own hope and ideally have the capacity to challenge those around them when the provision of aggressive care is a form of providing false hope. The articulation of moral competencies may support the development of nursing ethics curricula to prepare future nurses in a way that is sensitive to the characteristics of actual practice settings. © The Author(s) 2014.

  16. Attachment, hope, and participation: Testing an expanded model of Snyder's hope theory for prediction of participation for individuals with spinal cord injury.

    Science.gov (United States)

    Blake, John; Yaghmaian, Rana; Brooks, Jessica; Fais, Connor; Chan, Fong

    2018-05-01

    The aim of the study was to test an expanded model of Snyder's hope theory for prediction of participation for individuals with spinal cord injury (SCI). Statistical model testing focused on evaluation of hope theory constructs (i.e., agency thoughts and pathways thoughts) as serial mediators of relationships between attachment and community participation. Quantitative, cross-sectional, descriptive design using multiple regression and correlational techniques. The sample comprised 108 persons with SCI recruited from spinal cord injury advocacy organizations in the United States, the United Kingdom, and Canada. Secure attachment, avoidant attachment, anxious attachment, and the hope constructs were significantly related to participation. Significant mediational effects were observed when agency thoughts and pathways thoughts were specified as mediators in series between attachment and community participation for people with SCI (i.e., agency specified as M1 and pathways specified as M2). Results provide support for Snyder's theoretical conceptualization and the use of hope-based interventions by rehabilitation practitioners for improving global participation outcomes for people with SCI who experience attachment-related difficulties. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  17. Photoconversion and dynamic hole recycling process in anion vacancies in neutron-irradiated MgO crystals

    International Nuclear Information System (INIS)

    Monge, M.A.; Gonzalez, R.; Munoz Santiuste, J.E.; Pareja, R.; Chen, Y.; Kotomin, E.A.; Popov, A.I.

    1999-01-01

    Optical spectroscopy and theory demonstrate that photon excitation of the positively charged anion vacancies (F + centers) at 5.0 eV in neutron-irradiated MgO crystals releases holes that are subsequently trapped at V-type centers, which are cation vacancies charge compensated by impurities, such as Al 3+ , F - , and OH - ions. The concentration of trapped-hole centers was found to exceed that of available anion vacancies. The disproportionately large amount of holes produced is attributed to a dynamic recycling process, by which the F + center serves to release a hole to the V-type centers and subsequently trap a hole from an Fe 3+ ion. The net effect was the increase of V-type centers mostly at the expense of Fe 3+ ions. It was also shown that concurrently there was a component which distributed holes directly from Fe 3+ to the V-type centers. copyright 1999 The American Physical Society

  18. Association of sociodemographic factors with hope for cure, religiosity, and spirituality in patients with venous ulcers.

    Science.gov (United States)

    Salomé, Geraldo Magela; de Almeida, Sergio Aguinaldo; Ferreira, Lydia Masako

    2015-02-01

    The objective of the study was to evaluate the association of sociodemographic factors with hope for cure and levels of religiosity and spirituality in patients with venous leg ulcers (VLUs). This was a primary, prospective, descriptive, analytical, clinical, nonrandomized study. The study was performed at a nursing care and education center of a university hospital in interior Minas Gerais, Brazil. A convenience sample of 50 adult patients with VLUs and Doppler ankle-brachial index ranging from 0.8 to 1.0 participated in the study. Patients with mixed ulcers, arterial ulcers, and diabetic foot ulcers were excluded from the study. A questionnaire assessing sociodemographic and clinical characteristics of patients, the Spirituality Self-rating Scale (SSRS), and the Herth Hope Index (HHI) were administered to all patients. The mean SSRS score was 10.20, and the mean HHI was 25.5, corresponding to low levels of spirituality and moderate hope for cure, respectively. Patients aged between 50 and 59 years, men, nonsmokers, and those who were unemployed had the lowest mean SSRS scores. The lowest mean HHI values were reported by patients whose ulcers had exudate and odor, those aged 20 to 39 years, retired, and living with the wound for 1 year or less. Patients who had no religion or were not practicing a religion and those who considered living with an ulcer as a punishment reported low SSRS scores. The results showed that most patients with VLUs had low levels of spirituality, did not perceive divine intervention in their daily life or practice religious activities such as prayer, and had moderate hope for cure.

  19. Measures for recycling plastic wastes in France

    Energy Technology Data Exchange (ETDEWEB)

    Cossais, J C [Ministere de l' Industrie et de la Recherche, 75 - Paris (France). Delegation aux Economies de Matieres Premieres

    1978-05-01

    Raw materials crisis and environmental awareness have lead to the question of intensively dealing with the recycling of plastics. Although plastic wastes (residues) industrially occuring have been recycled for a long time, this is certainly not always the case in the subsequent stages. One must particularly give thought to the considerable quantities of agricultural and municipal wastes. Besides the problem of collecting the waste which can only be satisfactorily solved by separate collection or setting up sorting places, it is necessary for the recycling plastic wastes on a large scale to find or develop sellable products. The product for sale is limited by economical aspects and prejudices against recycled materials. The public have taken to a series of measures in France to simplify recycling plastic wastes. Private industry is also beginning to take interest in this new sources of raw materials.

  20. Durable Recycled Superpave Mixes in Kansas

    Science.gov (United States)

    2018-04-01

    The use of economical and environment-friendly recycled asphalt materials has become increasingly popular for asphalt pavement construction. In general, reclaimed asphalt pavement (RAP) and recycled asphalt shingles (RAS) are used in hot-mix asphalt ...

  1. Secondary resources and recycling in developing economies.

    Science.gov (United States)

    Raghupathy, Lakshmi; Chaturvedi, Ashish

    2013-09-01

    Recycling of metals extends the efficient use of minerals and metals, reduces pressure on environment and results in major energy savings in comparison to primary production. In developing economies recycling had been an integral part of industrial activity and has become a major concern due to the handling of potentially hazardous material without any regard to the occupational health and safety (OH&S) needs. With rising awareness and interest from policy makers, the recycling scenario is changing and the large scale enterprises are entering the recycling sector. There is widespread expectation that these enterprises would use the Best Available Technologies (BAT) leading to better environment management and enhanced resource recovery. The major challenge is to enhance and integrate the activities of other stakeholders in the value chain to make recycling an economically viable and profitable enterprise. This paper is an attempt to propose a sustainable model for recycling in the developing economies through integration of the informal and formal sectors. The main objective is to augment the existing practices using a scientific approach and providing better technology without causing an economic imbalance to the present practices. In this paper studies on lead acid batteries and e-waste recycling in India are presented to evolve a model for "green economy". Copyright © 2013 Elsevier B.V. All rights reserved.

  2. Sustainability and training materials for in-place recycling.

    Science.gov (United States)

    2016-04-22

    Hot and cold in-place recycling techniques recycle 100 percent of a hot mix asphalt (HMA) pavement, in place, during the maintenance/rehabilitation process. Numerous studies have shown in-place recycling to be a sustainable, cost-effective procedure ...

  3. The Dynamic Earth: Recycling Naturally!

    Science.gov (United States)

    Goldston, M. Jenice; Allison, Elizabeth; Fowler, Lisa; Glaze, Amanda

    2013-01-01

    This article begins with a thought-provoking question: What do you think of when you hear the term "recycle?" Many think about paper, glass, aluminum cans, landfills, and reducing waste by reusing some of these materials. How many of us ever consider the way the systems of Earth dynamically recycle its materials? In the following…

  4. HOPE: A Python just-in-time compiler for astrophysical computations

    Science.gov (United States)

    Akeret, J.; Gamper, L.; Amara, A.; Refregier, A.

    2015-04-01

    The Python programming language is becoming increasingly popular for scientific applications due to its simplicity, versatility, and the broad range of its libraries. A drawback of this dynamic language, however, is its low runtime performance which limits its applicability for large simulations and for the analysis of large data sets, as is common in astrophysics and cosmology. While various frameworks have been developed to address this limitation, most focus on covering the complete language set, and either force the user to alter the code or are not able to reach the full speed of an optimised native compiled language. In order to combine the ease of Python and the speed of C++, we developed HOPE, a specialised Python just-in-time (JIT) compiler designed for numerical astrophysical applications. HOPE focuses on a subset of the language and is able to translate Python code into C++ while performing numerical optimisation on mathematical expressions at runtime. To enable the JIT compilation, the user only needs to add a decorator to the function definition. We assess the performance of HOPE by performing a series of benchmarks and compare its execution speed with that of plain Python, C++ and the other existing frameworks. We find that HOPE improves the performance compared to plain Python by a factor of 2 to 120, achieves speeds comparable to that of C++, and often exceeds the speed of the existing solutions. We discuss the differences between HOPE and the other frameworks, as well as future extensions of its capabilities. The fully documented HOPE package is available at http://hope.phys.ethz.ch and is published under the GPLv3 license on PyPI and GitHub.

  5. Multi-fluid modeling of low-recycling divertor regimes

    International Nuclear Information System (INIS)

    Smirnov, R.D.; Pigarov, A.Yu.; Krasheninnikov, S.I.; Rognlien, T.D.; Soukhanovskii, V.A.; Rensink, M.E.; Maingi, R.; Skinner, C.H.; Stotler, D.P.; Bell, R.E.; Kugel, H.W.

    2010-01-01

    The low-recycling regimes of divertor operation in a single-null NSTX magnetic configuration are studied using computer simulations with the edge plasma transport code UEDGE. The edge plasma transport properties pertinent to the low-recycling regimes are demonstrated. These include the flux-limited character of the parallel heat transport and the high plasma temperatures with the flattened profiles in the scrape-off-layer. It is shown that to maintain the balance of particle fluxes at the core interface the deuterium gas puffing rate should increase as the divertor recycling coefficient decreases. The radial profiles of the heat load to the outer divertor plate, the upstream radial plasma profiles, and the effects of the cross-field plasma transport in the low-recycling regimes are discussed. It is also shown that recycling of lithium impurities evaporating from the divertor plate at high surface temperatures can reverse the low-recycling divertor operational regime to the high-recycling one and may cause thermal instability of the divertor plate (copyright 2010 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  6. Methods of Recycling, Properties and Applications of Recycled Thermoplastic Polymers

    Directory of Open Access Journals (Sweden)

    Mădălina Elena Grigore

    2017-11-01

    Full Text Available This study aims to provide an updated survey of the main thermoplastic polymers in order to obtain recyclable materials for various industrial and indoor applications. The synthesis approach significantly impacts the properties of such materials and these properties in turn have a significant impact on their applications. Due to the ideal properties of the thermoplastic polymers such as corrosion resistance, low density or user-friendly design, the production of plastics has increased markedly over the last 60 years, becoming more used than aluminum or other metals. Also, recycling is one of the most important actions currently available to reduce these impacts and represents one of the most dynamic areas in the plastics industry today.

  7. The chemical recycle of cotton

    Directory of Open Access Journals (Sweden)

    Alice Beyer Schuch

    2016-08-01

    Full Text Available The chemical recycle of cotton textiles and/or other cellulosic materials for the purpose of manufacturing regenerated high quality textiles fibres is a novel process. The objective of related research is based on the forecast of population growth, on resource scarcity predictions, and on the negative environmental impact of the textile industry. These facts lead the need of broadening the scope for long-term textile-to-textile recycle - as the mechanical recycle of natural fibres serve for limited number of cycles, still depends on input of virgin material, and offer a reduced-in-quality output. Critical analysis of scientific papers, relevant related reports, and personal interviews were the base of this study, which shows viable results in laboratorial scale of using low-quality cellulosic materials as input for the development of high-quality regenerated textile fibres though ecological chemical process. Nevertheless, to scale up and implement this innovative recycle method, other peripheral structures are requested, such as recover schemes or appropriate sort, for instance. Further researches should also be considered in regards to colours and impurities.

  8. The Power of Hope

    Science.gov (United States)

    Larson, Scott

    2013-01-01

    Many youth who have experienced pain and trauma have learned to survive. But surviving is not the same as thriving. Humans are able to flourish only as they find hope. How can adults help youth envision positive futures? One strategy is to help youth to have a concrete vision of a future worth having. One exercise asks young people to write their…

  9. Recycled materials in Portland cement concrete

    Science.gov (United States)

    2000-06-01

    This report pertains to a comprehensive study involving the use of recycled materials in Portland cement concrete. Three different materials were studied including crushed glass (CG), street sweepings (SS), and recycled concrete (RC). Blast furnace s...

  10. Case studies in rural recycling. Public service report series

    Energy Technology Data Exchange (ETDEWEB)

    Cosper, S.D.; Hallenbeck, W.H.; Brenniman, G.R.

    1994-02-01

    Due to state planning requirements and federal landfill regulations, solid waste management in rural areas (particularly recycling) has received much attention in recent years. The growth of recycling during the 1980s occurred mainly in urban and suburban areas. Therefore, rural recycling is still a relatively new enterprise. This report presents several rural recycling case studies from Colorado, Illinois, Indiana, Iowa, Minnesota, Tennessee, and Ontario, Canada to provide examples of successes and problems. This report also discusses the current issues of cooperative marketing of recyclables and municipal solid waste flow control. With respect to recycling, a rural region does not have ready access to markets for collected materials and has difficulty in generating easily marketable quantities of recyclables. (Copyright (c) 1994 The Board of Trustees of the University of Illinois.)

  11. Recycling retention functions

    International Nuclear Information System (INIS)

    Skrable, K.W.; Chabot, G.E.; Johnson, M.H.

    1981-01-01

    Beginning with the concept of any number of physiologically meaningful compartments that recycle material with a central extracellular fluid compartment and considering various excretion pathways, we solve the differential equations describing the kinetics by the method of Laplace to obtain concise algebraic expressions for the retentions. These expressions contain both fundamental and eigenvalue rate constants; the eigenvalue rate constants are obtained from the solution of a polynomial incorporating the fundamental rate constants. Mathematically exact expressions that predict the biodistribution resulting from continuous uptakes are used to obtain very simple mathematically exact steady state expressions as well as approximate expressions applicable to any time. These steady state and approximate expressions contain only the fundamental rate constants; also, they include a recycling factor that describes the increase in the biodistributions because of recycling. To obtain the values of the fundamental rate constants, short term kinetics studies along with data on the long term distributions are suggested. Retention functions obtained in this way predict both the short term and long term distributions; they therefore are useful in the interpretation of bioassay data and in the estimation of internal doses

  12. Low to high performance recycled cementitious materials: case studies

    OpenAIRE

    Etxeberria Larrañaga, Miren

    2015-01-01

    In this work, four real case studies using concrete produced with recycled aggregates are described. The four real cases carried out in Barcelona are: 1) Pavement filling with control low strength material (CLSM) employing fine recycled aggregates, 2) pervious recycled aggregate concrete employing coarse mixed recycled aggregates in the works undertaken at Cervantes park; 3) Concrete blocks produced employing recycled and slag aggregates as well as sea water for a new breakwater dyke and 4) R...

  13. Pre-Saturation Technique of the Recycled Aggregates: Solution to the Water Absorption Drawback in the Recycled Concrete Manufacture.

    Science.gov (United States)

    García-González, Julia; Rodríguez-Robles, Desirée; Juan-Valdés, Andrés; Morán-Del Pozo, Julia Mª; Guerra-Romero, M Ignacio

    2014-09-01

    The replacement of natural aggregates by recycled aggregates in the concrete manufacturing has been spreading worldwide as a recycling method to counteract the large amount of construction and demolition waste. Although legislation in this field is still not well developed, many investigations demonstrate the possibilities of success of this trend given that concrete with satisfactory mechanical and durability properties could be achieved. However, recycled aggregates present a low quality compared to natural aggregates, the water absorption being their main drawback. When used untreated in concrete mix, the recycled aggregate absorb part of the water initially calculated for the cement hydration, which will adversely affect some characteristics of the recycled concrete. This article seeks to demonstrate that the technique of pre-saturation is able to solve the aforementioned problem. In order to do so, the water absorption of the aggregates was tested to determine the necessary period of soaking to bring the recycled aggregates into a state of suitable humidity for their incorporation into the mixture. Moreover, several concrete mixes were made with different replacement percentages of natural aggregate and various periods of pre-saturation. The consistency and compressive strength of the concrete mixes were tested to verify the feasibility of the proposed technique.

  14. VMware vCenter Operations Manager essentials

    CERN Document Server

    Malhoit, Lauren

    2014-01-01

    This book features step-by-step guides as well as practical, real-world examples, exploiting the premise that there's never just one way to narrow down problems. It tackles scenarios by going through different workflows to find the answers you need.This book is for administrators, engineers, and architects of VMware vSphere as well as those who have or are interested in purchasing the vCenter Operations Manager Suite. It will particularly help administrators who are hoping to use vCenter Operations Manager to optimize their VMware environments as well as quickly troubleshoot both long-term and

  15. Energy implications of recycling packaging materials

    Energy Technology Data Exchange (ETDEWEB)

    Gaines, L.L. [Argonne National Lab., IL (United States); Stodolsky, F. [Argonne National Lab., Washington, DC (United States)

    1994-03-01

    In 1992, Congress sought to rewrite the United States comprehensive solid waste legislation -- the Resource Conservation and Recovery Act (RCRA). Commodity-specific recycling rates were proposed for consumer-goods packaging materials and newsprint We compare the impacts on energy, materials use, and landfill volume of recycling at those rates to the impacts for alternative methods of material disposition to determine the optimum for each material. After products have served their intended uses, there are several alternative paths for material disposition. These include reuse, recycling to the same product, recycling to a lower-valued product, combustion for energy recovery, incineration without energy recovery, and landfill. Only options considered to be environmentally sound are Included. Both houses of Congress specifically excluded combustion for energy recovery from counting towards the recovery goats, probably because combustion is viewed as a form of disposal and is therefore assumed to waste resources and have n environmental effects. However, co-combustion in coal-fired plants or combustion in appropriately pollution-controlled waste-to-energy plants Is safe, avoids landfill costs, and can displace fossil fuels. In some cases, more fossil fuels can be displaced by combustion than by recycling. We compare the alternative life-cycle energies to the energies for producing the products from virgin materials. Results depend on the material and on the objective to be achieved. There are trade-offs among possible goals. For instance, paper packaging recycling conserves trees but may require greater fossil-fuel input than virgin production. Therefore, the objectives for proposed legislation must be examined to see whether they can most effectively be achieved by mandated recycling rates or by other methods of disposition. The optimal choices for the United States may not necessarily be the same as those for Europe and other parts of the world.

  16. Hope and Life Satisfaction in Black College Students Coping with Race-Related Stress

    Science.gov (United States)

    Danoff-Burg, Sharon; Prelow, Hazel M.; Swenson, Rebecca R.

    2004-01-01

    This exploratory study examined the effects of hope and coping with race-related stress on life satisfaction in Black college students. Findings indicated that students with high hope had greater coping efficacy and used more problem-focused coping than students with low hope. Neither coping nor hope had a direct effect on life satisfaction.…

  17. Hope for the Crowded Planet

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen

    2005-01-01

    The basic environmental problem of population growth is discussed on the background of low bith rates in many countries, primarely in affluent countries plus China. This gives hope for. The problems from declining population raised by some economists, such as ageing population, are minor compared...

  18. Should palliative care patients' hope be truthful, helpful or valuable? An interpretative synthesis of literature describing healthcare professionals' perspectives on hope of palliative care patients

    NARCIS (Netherlands)

    Olsman, Erik; Leget, Carlo; Onwuteaka-Philipsen, Bregje; Willems, Dick

    2014-01-01

    Healthcare professionals' perspectives on palliative care patients' hope influence communication. However, these perspectives have hardly been examined. To describe healthcare professionals' perspectives on palliative care patients' hope found in the literature. The interpretative synthesis

  19. Recycling of plastics in Germany

    International Nuclear Information System (INIS)

    Thienen, N. von; Patel, M.

    1999-01-01

    This article deals with the waste management of post-consumer plastics in Germany and its potential to save fossil fuels and reduce CO 2 emissions. Since most experience is available for packaging, the paper first gives an overview of the legislative background and the material flows for this sector. Then recycling and recovery processes for plastics waste from all sectors are assessed in terms of their contribution to energy saving and CO 2 abatement. Practically all the options studied show a better performance than waste treatment in an average incinerator which has been chosen as the reference case. High ecological benefits can be achieved by mechanical recycling if virgin polymers are substituted. The paper then presents different scenarios for managing plastic waste in Germany in 1995: considerable savings can be made by strongly enhancing the efficiency of waste incinerators. Under these conditions the distribution of plastics waste among mechanical recycling, feedstock recycling and energy recovery has a comparatively mall impact on the overall results. The maximum savings amount to 74 PJ of energy, i.e, 9% of the chemical sector energy demand in 1995 and 7.0 Mt CO 2 , representing 13% of the sector's emissions. The assessment does not support a general recommendation of energy recovery due to the large difference between the German average and the best available municipal waste-to-energy facilities and also due to new technological developments in the field of mechanical recycling

  20. Effect of Recycling in Post-Consumer Polystyrene Cups

    OpenAIRE

    Ahmed, Mehnaz

    2016-01-01

    The aim of the thesis was to recycle post-consumer polystyrene cups and to analyze the changes in mechanical and rheological properties of the recycled polystyrene. The me-chanical properties were tensile strength, Young’s modulus and the rheological proper-ties was melt flow index. In order to analyze the changes in properties, material testing results of pristine polystyrene were compared with the recycled polystyrene. The same polystyrene material was recycled and tested twice in order to ...

  1. Hope and General Self-efficacy: Two Measures of the Same Construct?

    Science.gov (United States)

    Zhou, Mingming; Kam, Chester Chun Seng

    2016-07-03

    The aim of this study was to test the extent to which hope measure is equivalent to general self-efficacy measure. Questionnaire data on these two constructs and other external variables were collected from 199 Chinese college students. The factor analytic results suggested that hope and self-efficacy items measured the same construct. The unidimensional model combining hope items and GSE items fit the data as well as the bidimensional model, indicating that their corresponding items measured the same underlying construct. Further analyses showed that hope and GSE did not correlate with external variables differently in a systematic manner. Most of these correlational differences were non-significant and negligible. These findings suggested that the literatures studying GSE and hope could be considered to be integrated and that researchers need to recognize and acknowledge the conceptual and operational similarities among these constructs in the literature.

  2. Planning of Eka Hospital Pekanbaru wastewater recycling facility

    Science.gov (United States)

    Jecky, A.; Andrio, D.; Sasmita, A.

    2018-04-01

    The Ministry of Public Works No. 06 2011 required the large scale of water to conserve the water resource, Eka Hospital Pekanbaru have to improve the sewage treatment plant through the wastewater recycling. The effluent from the plant can be used to landscape gardening and non-potable activities. The wastewater recycling design was done by analyzing the existing condition of thesewage treatment plant, determine the effluent quality standards for wastewater recycling, selected of alternative technology and processing, design the treatment unit and analyze the economic aspects. The design of recycling facility by using of combination cartridge filters processing, ultrafiltration membranes, and desinfection by chlorination. The wastewater recycling capacity approximately of 75 m3/day or 75% of the STP effluent. The estimated costs for installation of wastewater recycling and operation and maintenance per month are Rp 111,708,000 and Rp 2,498,000 respectively.

  3. Long-term aging of recycled binders.

    Science.gov (United States)

    2015-07-01

    Asphalt pavement is Americas most recycled material. Eighty million tons of asphalt, nearly 80% of all milled asphalt pavement, : is recycled every year [1]. To effectively maintain its 40,000 miles of paved roads, the Florida Department of Transp...

  4. 24 CFR 972.115 - Relationship between required conversions and HOPE VI developments.

    Science.gov (United States)

    2010-04-01

    ... conversions and HOPE VI developments. 972.115 Section 972.115 Housing and Urban Development Regulations... Relationship between required conversions and HOPE VI developments. HUD actions to approve or deny proposed HOPE VI revitalization plans must be consistent with the requirements of this subpart. Developments...

  5. Should palliative care patients' hope be truthful, helpful or valuable? An interpretative synthesis of literature describing healthcare professionals' perspectives on hope of palliative care patients

    NARCIS (Netherlands)

    Olsman, E.; Leget, C.; Onwuteaka-Philipsen, B.D.; Willems, D.

    2014-01-01

    Background: Healthcare professionals? perspectives on palliative care patients? hope influence communication. However, these perspectives have hardly been examined. Aim: To describe healthcare professionals? perspectives on palliative care patients? hope found in the literature. Design: The

  6. Sustainability issues in circuit board recycling

    DEFF Research Database (Denmark)

    Legarth, Jens Brøbech; Alting, Leo; Baldo, Gian Luca

    1995-01-01

    The resource recovery and environmental impact issues of printed circuit board recycling by secondary copper smelters are discussed. Guidelines concerning material selection for circuit board manufacture and concerning the recycling processes are given to enhance recovery efficiency and to lower...

  7. COMPOSITES FROM RECYCLED WOOD AND PLASTICS

    Science.gov (United States)

    The ultimate goal of this research was to develop technology to convert recycled wood fiber and plastics into durable products that are recyclable and otherwise environmentally friendly. Two processing technologies were used to prepare wood-plastic composites: air-laying and melt...

  8. Attitudes toward text recycling in academic writing across disciplines.

    Science.gov (United States)

    Hall, Susanne; Moskovitz, Cary; Pemberton, Michael A

    2018-01-01

    Text recycling, the reuse of material from one's own previously published writing in a new text without attribution, is a common academic writing practice that is not yet well understood. While some studies of text recycling in academic writing have been published, no previous study has focused on scholars' attitudes toward text recycling. This article presents results from a survey of over 300 journal editors and editorial board members from 86 top English-language journals in 16 different academic fields regarding text recycling in scholarly articles. Responses indicate that a large majority of academic gatekeepers believe text recycling is allowable in some circumstances; however, there is a lack of clear consensus about when text recycling is or is not appropriate. Opinions varied according to the source of the recycled material, its structural location and rhetorical purpose, and conditions of authorship conditions-as well as by the level of experience as a journal editor. Our study suggests the need for further research on text recycling utilizing focus groups and interviews.

  9. Physics of plutonium recycling: volume V. Plutonium recycling in fast reactors

    International Nuclear Information System (INIS)

    1996-01-01

    As part of a programme proposed by the OECD/NEA Working Party on Physics of Plutonium Recycling (WPPR) to evaluate different scenarios for the use of plutonium, fast reactor physics benchmarks were developed. In this report, the multi-recycle performance of the metal-fuelled benchmark is evaluated. Benchmark results assess the reactor performance and toxicity behaviour in a closed nuclear fuel cycle for a parametric variation of the conversion ratio between 0.5 and 1.0. Results indicate that a fast burner reactor closed fuel cycle can be utilised to significantly reduce the radiotoxicity originating in the LWR cycle which would otherwise be destined for burial. (Author). tabs., figs., refs

  10. Socio-Spatial Factors Affecting Household Recycling in Townhouses in Pretoria, South Africa

    Directory of Open Access Journals (Sweden)

    Jacques du Toit

    2017-11-01

    Full Text Available Although social factors affecting recycling have been widely researched, the effect of spatial and physical factors posed by medium-density housing, such as townhouses, is less understood. Using the Theory of Planned Behaviour, the relative effect of three sets of factors on household recycling in townhouses are examined, including ‘attitude’ (about recycling, ‘subjective norm’ (social pressure, and ‘perceived behaviour control’ (ability to recycle. A questionnaire survey of 300 households was conducted in Equestria, an enclosed middle-income residential estate consisting of several townhouse complexes. Confirmatory factor analysis verified the three factor measurement model for recycling participation. Both recyclers and non-recyclers showed positive attitudes toward recycling and felt social pressure to recycle. Non-recyclers, however, felt significantly less able to recycle. Most recyclers as well as non-recyclers indicated that certain proposals for increasing recycling may cause them to recycle more, in particular a system through which the management agency arranges access for a recycling company to collect recyclables from strategically located collection points inside the complex. Urban planning and design recommendations for facilitating recycling in townhouses are discussed.

  11. Recycling of beverage containers in the Northwest Territories

    Energy Technology Data Exchange (ETDEWEB)

    1987-02-01

    This study researched existing recycling systems, presented pertinent data on the beverage and transportation industries, and evaluated the potential of recycling beverage bottles and cans in the Northwest Territories. The study first describes the history and existing concepts of recycling, provides a general description of recycling methods with advantages and disadvantages, and highlights particular approaches taken by other provinces. Markets for the Northwest Territories are also discussed, including the potential of recoverable material, anticipated recovery rates, transportation to markets, and present recycling operations. Three strategies are identified for the southwest, northwest, and the eastern Region. Recycling is preferred for aluminium cans, glass beer bottles, plastic bottles, and glass wine and liquor bottles in that order. The report recommends a limited program for aluminium cans and beer bottles to begin immediately. Beer bottles should be refilled either in Alberta or the Northwestern Territories and aluminium cans should be compacted and shipped to recycling markets in southern Canada or the United States. The program should first be implemented in areas serviced by Alberta and accessible by truck or barge from Hay River. A program implementation plan is also included. 8 refs., 2 figs., 14 tabs.

  12. Comparative analysis of old, recycled and new PV modules

    Directory of Open Access Journals (Sweden)

    Haroon Ashfaq

    2017-01-01

    Full Text Available This paper presents comparative analysis of old, recycled and new PV modules. It is possible to recycle even very old products by modern standard processes in a value-conserving manner. About 90% of the materials recovered from solar panels can be recycled into useful products. Carbon emission and energy cost are low in manufacturing recycled SPV. Modules can be manufactured with recycled materials and reinstalled in systems as a full quality product with today’s technology good for another 25–30 years. Analysis of all the models of PV module is done with the help of MATLAB. This helps in comparison and proves the effectiveness of the recycled PV module based systems.

  13. Reclaiming hope: Affect, temporality, politics

    NARCIS (Netherlands)

    Taş, B.

    2016-01-01

    The critical task I take up in this research is to reconceptualize hope as an affective orientation in time, which requires remaining open to the risks that the unknowability of the future entails. I consider this opening a political contestation that is necessary to critique the current

  14. Post-vehicle-application lithium-ion battery remanufacturing, repurposing and recycling capacity: Modeling and analysis

    Directory of Open Access Journals (Sweden)

    Charles Robert Standridge

    2015-05-01

    recycling is relatively constant regardless of the percent of post-vehicle-application batteries that are remanufactured.  The sum of the capacity for remanufacturing and recycling is relatively constant as well.  The need for new battery production capacity is reduced significantly (> 10% for remanufacturing percentages of 55% and above. Research limitations/implications: There is a high degree of uncertainty associated with any forecast concerning post-vehicle-application lithium-ion batteries due to a lack of experience with their remanufacturing, repurposing, and recycling. Practical implications: Electrification of vehicles appears to be the only technically feasible approach to meeting government regulations concerning mileage and emissions (Center for Climate and Energy Solutions 2013.  The planning in the present for the remanufacturing, repurposing, and recycling of the lithium-ion batteries used in electrification of vehicles is necessary.  Capacity estimation is one important component of such planning. Social implications: The electrification of vehicles versus the use of fossil fuels is consistent with the guiding principles of sustainability in helping to meet current needs without compromising the needs and resources of future generations.  Reusing entire lithium-ion batteries or recycling the materials of which they are composed further reinforces the sustainability of vehicle electrification. Originality/value: Estimates of recycling capacity needed in 2030, about 2.69M kWh, change little with the percent of post-vehicle-application batteries that are remanufactured.  The need for significant recycling capacity appears between 2022 and 2024, increasing steadily thereafter.  Similarly, the sum of remanufacturing and repurposing capacity is relatively constant indicating the need for flexible facilities that can do either task.  In addition by 2030, up to approximately 25% of new battery production could be replaced by remanufactured batteries.

  15. Rorty, Addams, and Social Hope

    Directory of Open Access Journals (Sweden)

    Erik Schneiderhan

    2013-08-01

    Full Text Available This paper takes up the practice and ideas of Richard Rorty and Jane Addams, considering their work at the intersection of pragmatism and social action. It argues that both Richard Rorty and Jane Addams, each in their own way, were thinking through the significant challenges that confront individuals in their everyday lives: How do we adjudicate between the competing values of individual accountability and helping others in our community? This is our social test, and the way we each answer the question matters for the future of democracy and our degree of social hope. Rorty was a champion of engagement with the community, and believed that out of this experience comes our capacity to creatively weave the fabric of liberal democracy. The paper argues that Addams’s work at Hull-House in Chicago offers concrete examples of the potential of reciprocal social relations, providing practical substance to Rorty’s ideas and showing how we can create social hope through action.

  16. Hope in Patients with Cancer

    Directory of Open Access Journals (Sweden)

    Selma Turan Kavradim

    2014-06-01

    Full Text Available Cancer, which is one of the major health problems leading to despair, uncertainty, pain and suffering, is perceived as a serious and chronic disease. Cancer negatively affects individuals' quality of life due to the physical, psychological, and socio-economic problems. Today, despite inspiring advances in diagnosis and treatment of cancer and increase in survival rates of patients, appearance of physical and psycho-social disorders during cancer course disrupts the adaptation mechanisms of patients and undermines expectations for the future. Most of the time in clinical practice, clinicians focus on physical assessments and treatment planning of cancer patients primarily, ignoring social, psychological, economic and cultural factors related with the disease. This approach definitely influences patients' hope levels and their effective dealing with the disease. The aim of this article is to guide medical staff and increase awareness about the concept of hope in patients with cancer. [Psikiyatride Guncel Yaklasimlar - Current Approaches in Psychiatry 2014; 6(2.000: 154-164

  17. Investigation of limiter recycling in the divertor tokamak ASDEX

    International Nuclear Information System (INIS)

    Wagner, F.

    1981-08-01

    A divertor experiment like the ASDEX tokamak is especially suited for studying ion recycling at a material limiter, because the plasma can alternatively be limited by a magnetic limiter (separatrix) or by a material limiter. The role of the material limiter in ion recycling is documented by observing the increase in charge exchange flux emitted at the limiter position, and the decrease in external gas input necessary to keep the plasma line density invariant, when the material limiter is moved to the plasma. Ion recycling occurs predominantly at the outside section of a ring limiter. The limiter material saturates shortly after the start of the discharge. About 60% of the total recycling occurs at the limiter, which is nearly 100% of the ion recycling. The remaining 40% of the total recycling is carried by charge exchange neutrals. Due to saturation, the recycling coefficient at the limiter is 1; the recycling coefficient of the charge exchange neutrals at the wall is approximately 0.5 giving rise to a total recycling coefficient of limiter discharges of 0.8-0.9. It is observed that the plasma resistivity increases when the material limiter is moved toward the separatrix. The increase in Zsub(eff) can tentatively be explained by proton sputtering. (orig.)

  18. Blue Box Plus Quinte regional recycling demonstration program

    Energy Technology Data Exchange (ETDEWEB)

    1992-08-01

    The Blue Box Plus recycling program was established in September 1990 in the Quinte region of Ontario. The program was intended to develop the necessary operational information so that the existing program could expand to include mixed plastics, corrugated cardboard, and boxboard. Over 33,000 recycling boxes were distributed over an area covering 15 municipalities with a population base of 95,000. The program showed the willingness of the public to participate in recycling, but advertising and promotion of the program were critical for success. Separation of the recycled materials on the collection trucks was found to be a viable approach and more efficient than sorting at the recycling plant. Adding new materials to be recycled could be done efficiently, and operating costs were in line with those for other programs collecting fewer materials. A cooperative market development with industrial players opened up a new and expanding market for boxboard. 6 figs., 9 tabs.

  19. 17. Meeting municipal waste Magdeburg. Residual waste - recycling - resource; 17. Tagung Siedlungsabfallwirtschaft Magdeburg. Restabfall - Recycling - Ressource

    Energy Technology Data Exchange (ETDEWEB)

    Haase, Hartwig (ed.)

    2012-11-01

    Within the 17th meeting Waste Management at Residential Areas from 12th o 13th September, 2012 in Magdeburg (Federal Republic of Germany), the following lectures were held: (1) Opening Session - Waste management in Saxony-Anhalt (O. Aeikens); (2) World with future - the eco-social perspective (F.J. Radermacher); (3) Global commodity markets - rare earths and their recycling (I. Fahimi); (4) The further development of nearhousehold capture of recyclable materials (J. Seitel); (5) On the future of the disposal management (J. Balg); (6) Options for action for the future of the municipal waste management (A. Gosten); (7) Current models of the capture of recyclable materials in Germany (M. Kerkhoff); (8) The recycling bin as a pilot test in Hanover (R. Middendorf); (9) Position of BellandVision on the implementation of a unified recycling bin (J. Soelling); (10) What will change with the new Recycle Economy Law according to the material flows and waste treatment capacities? (H. Alwast); (11) Waste management plan Saxony-Anhalt - Current developments (S. Hagel); (12) Wastes from the thermal waste treatment - Risk potential and disposal (G.-R. Behr); (13) Landfill Mining - Contribution of the waste management to the securing of resources (K. Fricke); (14) Logistic process design and system design in the transport of wastes in developing countries using Serbia as an example (Z. Jovanovic); (15) Example of good practices in the subsequent use of landfills - Solar park Cracauer Anger (M. Harnack); (16) Ecoloop - energy efficient gasification in the limestone moving-bed (R. Moeller); (17) Utilization of waste and biomass as a resource? Only by means of an intelligent logistics. (S. Trojahn); (18) Renewable energy resources - Experiences of a network provider (J. Kempmann).

  20. Patient-centered medical home model: do school-based health centers fit the model?

    Science.gov (United States)

    Larson, Satu A; Chapman, Susan A

    2013-01-01

    School-based health centers (SBHCs) are an important component of health care reform. The SBHC model of care offers accessible, continuous, comprehensive, family-centered, coordinated, and compassionate care to infants, children, and adolescents. These same elements comprise the patient-centered medical home (PCMH) model of care being promoted by the Affordable Care Act with the hope of lowering health care costs by rewarding clinicians for primary care services. PCMH survey tools have been developed to help payers determine whether a clinician/site serves as a PCMH. Our concern is that current survey tools will be unable to capture how a SBHC may provide a medical home and therefore be denied needed funding. This article describes how SBHCs might meet the requirements of one PCMH tool. SBHC stakeholders need to advocate for the creation or modification of existing survey tools that allow the unique characteristics of SBHCs to qualify as PCMHs.

  1. Defense Waste Processing Facility Recycle Stream Evaporation

    International Nuclear Information System (INIS)

    STONE, MICHAEL

    2006-01-01

    The Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS) stabilizes high level radioactive waste (HLW) by vitrification of the waste slurries. DWPF currently produces approximately five gallons of dilute recycle for each gallon of waste vitrified. This recycle stream is currently sent to the HLW tank farm at SRS where it is processed through the HLW evaporators with the concentrate eventually sent back to the DWPF for stabilization. Limitations of the HLW evaporators and storage space constraints in the tank farm have the potential to impact the operation of the DWPF and could limit the rate that HLW is stabilized. After an evaluation of various alternatives, installation of a dedicated evaporator for the DWPF recycle stream was selected for further evaluation. The recycle stream consists primarily of process condensates from the pretreatment and vitrification processes. Other recycle streams consist of process samples, sample line flushes, sump flushes, and cleaning solutions from the decontamination and filter dissolution processes. The condensate from the vitrification process contains some species, such as sulfate, that are not appreciably volatile at low temperature and could accumulate in the system if 100% of the evaporator concentrate was returned to DWPF. These species are currently removed as required by solids washing in the tank farm. The cleaning solutions are much higher in solids content than the other streams and are generated 5-6 times per year. The proposed evaporator would be required to concentrate the recycle stream by a factor of 30 to allow the concentrate to be recycled directly to the DWPF process, with a purge stream sent to the tank farm as required to prevent buildup of sulfate and similar species in the process. The overheads are required to meet stringent constraints to allow the condensate to be sent directly to an effluent treatment plant. The proposed evaporator would nearly de-couple the DWPF process from the

  2. Exploring hope and healing in patients living with advanced non-small cell lung cancer.

    Science.gov (United States)

    Eustache, Chloe; Jibb, Emily; Grossman, Mary

    2014-09-01

    To explore the experience and meaning of hope in relation to the healing process of patients living with stage IIIb or IV non-small cell lung cancer. Interpretative qualitative study design. Peter Brojde Lung Cancer Centre in the Jewish General Hospital in Montreal, Quebec, Canada. 12 English- and French-speaking patients, aged 36-78 years. One 60-90-minute semistructured interview per participant was conducted. An inductive approach to data analysis was taken, involving immersion in the data, coding, classifying, and creating linkages. Four main themes emerged: (a) the morass of shattered hope, (b) tentative steps toward a new hope paradigm, (c) reframing hope within the context of a life-threatening illness, and (d) strengthening the link between hope and wellness. Patients described a process where hope was diminished or lost entirely, regained, and reshaped as they learned to live and grow following their diagnosis. This study adds to the literature by describing the dynamic nature of hope as well as factors facilitating or hindering the hope process. It demonstrates how finding meaning, a structural component of healing, can be used to envision a new hopeful future. This study suggests hope and healing cannot exist in isolation, and highlights the importance of understanding the fluctuating nature of hope in patients with advanced lung cancer to foster it, therefore promoting healing.

  3. Evaluation of radioactive scrap metal recycling

    International Nuclear Information System (INIS)

    Nieves, L.A.; Chen, S.Y.; Kohout, E.J.; Nabelssi, B.; Tilbrook, R.W.; Wilson, S.E.

    1995-12-01

    This report evaluates the human health risks and environmental and socio-political impacts of options for recycling radioactive scrap metal (RSM) or disposing of and replacing it. Argonne National Laboratory (ANL) is assisting the US Department of Energy (DOE), Office of Environmental Restoration and Waste Management, Oak Ridge Programs Division, in assessing the implications of RSM management alternatives. This study is intended to support the DOE contribution to a study of metal recycling being conducted by the Task Group on Recycling and Reuse of the Organization for Economic Cooperation and Development. The focus is on evaluating the justification for the practice of recycling RSM, and the case of iron and steel scrap is used as an example in assessing the impacts. To conduct the evaluation, a considerable set of data was compiled and developed. Much of this information is included in this document to provide a source book of information

  4. The feasibility of recycling contaminated concrete

    International Nuclear Information System (INIS)

    Ayers, K.W.; Corroon, W.; Parker, F.L.

    1999-01-01

    The changing mission of the Department of Energy along with the aging of many of its facilities has resulted in renewed emphasis on decontaminating and decommissioning surplus structures. Currently DOE is decontaminating some concrete and sending the clean material to C and D disposal facilities. In other instance, DOE is sending contaminated concrete to LLW disposal facilities. This paper examines the economic feasibility of decontaminating the concrete and recycling the rubble as clean aggregate. A probabilistic cost model was used to examine six potential recycling and disposal scenarios. The model predicted potential costs saving across the DOE complex of nearly one billion dollars. The ability of local markets to assimilate the recycled material was estimated for Washington, Idaho, Tennessee, New Mexico, and South Carolina. The relationships between a number of the economic model's variables were examined to develop operating ranges for initial managerial evaluation of recycling

  5. Evaluation of radioactive scrap metal recycling

    Energy Technology Data Exchange (ETDEWEB)

    Nieves, L.A.; Chen, S.Y.; Kohout, E.J.; Nabelssi, B.; Tilbrook, R.W.; Wilson, S.E.

    1995-12-01

    This report evaluates the human health risks and environmental and socio-political impacts of options for recycling radioactive scrap metal (RSM) or disposing of and replacing it. Argonne National Laboratory (ANL) is assisting the US Department of Energy (DOE), Office of Environmental Restoration and Waste Management, Oak Ridge Programs Division, in assessing the implications of RSM management alternatives. This study is intended to support the DOE contribution to a study of metal recycling being conducted by the Task Group on Recycling and Reuse of the Organization for Economic Cooperation and Development. The focus is on evaluating the justification for the practice of recycling RSM, and the case of iron and steel scrap is used as an example in assessing the impacts. To conduct the evaluation, a considerable set of data was compiled and developed. Much of this information is included in this document to provide a source book of information.

  6. The level of recycling operations in Botswana | Ketlogetswe ...

    African Journals Online (AJOL)

    This paper describes a case study that evaluated the level of recycling operations in Botswana. Recycling operations are now recommended as effective waste management strategies for reducing the amount of municipal solid waste disposed at landfill sites. In assessing the level of recycling operations in Botswana, two ...

  7. Experiences that inspire hope: Perspectives of suicidal patients.

    Science.gov (United States)

    Vatne, May; Nåden, Dagfinn

    2018-06-01

    Suffering in a suicidal crisis includes feelings such as despair, loneliness, anxiety, fear, shame, guilt and hopelessness. This study highlights the experiences of patients in the aftermath of suicide attempts. The research question was, what do suicidal patients see as meaningful help in care and treatment situations? The methodology is inspired by Gadamer's hermeneutics, where the parts are understood in light of the whole, and the whole is understood in light of the parts. Qualitative interviews were employed. Participants and research context: A total of 10 persons, 4 women and 6 men 21-52 years old, were informed and asked to participate by specialists in psychology at two emergency psychiatric wards and by one crisis resolution team. Nine of the participants had experienced one or more suicide attempts using drugs and alcohol. Forced hospitalization prevented one of the 10 participants from attempting suicide. Ethical considerations: Before the participants signed an informed consent form, the interviewer met all participants to provide the written information, talking about the interview. A meeting to terminate contact was arranged after the participants had read their own interviews. Three themes were generated by the methodology we applied: (1) experiencing hope through encounters, (2) experiencing hope through the atmosphere of wisdom and (3) experiencing a ray of hope from taking back responsibility. The findings are discussed in the light of Eriksson's suffering theory and Lindström's theory about psychiatric care, as well as earlier research and theories about suicidality. The study reinforces possibilities that hope in suicidal patients can be inspired in encounters with healthcare personnel and within caring cultures. Through dialogue and cooperation, patients' safety and ability to cope with suffering is created and thereby the hope and will to struggle for life.

  8. Origins of Early Adolescents' Hope: Personality, Parental Attachment, and Stressful Life Events

    Science.gov (United States)

    Otis, Kristin L.; Huebner, E. Scott; Hills, Kimberly J.

    2016-01-01

    Psychology has recently increased attention to identifying psychological qualities in individuals that indicate positive mental health, such as hope. In an effort to understand further the origins of hope, we examined the relations among parental attachment, stressful life events, personality variables, and hope in a sample of 647 middle school…

  9. Graphite Recycling from Spent Lithium-Ion Batteries.

    Science.gov (United States)

    Rothermel, Sergej; Evertz, Marco; Kasnatscheew, Johannes; Qi, Xin; Grützke, Martin; Winter, Martin; Nowak, Sascha

    2016-12-20

    The present work reports on challenges in utilization of spent lithium-ion batteries (LIBs)-an increasingly important aspect associated with a significantly rising demand for electric vehicles (EVs). In this context, the feasibility of anode recycling in combination with three different electrolyte extraction concepts is investigated. The first method is based on a thermal treatment of graphite without electrolyte recovery. The second method additionally utilizes a subcritical carbon-dioxide (subcritical CO 2 )-assisted electrolyte extraction prior to thermal treatment. And the final investigated approach uses supercritical carbon dioxide (scCO 2 ) as extractant, subsequently followed by the thermal treatment. It is demonstrated that the best performance of recycled graphite anodes can be achieved when electrolyte extraction is performed using subcritical CO 2 . Comparative studies reveal that, in the best case, the electrochemical performance of recycled graphite exceeds the benchmark consisting of a newly synthesized graphite anode. As essential efforts towards electrolyte extraction and cathode recycling have been made in the past, the electrochemical behavior of recycled graphite, demonstrating the best performance, is investigated in combination with a recycled LiNi 1/3 Co 1/3 Mn 1/3 O 2 cathode. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Rubber Recycling: Chemistry, Processing, and Applications

    NARCIS (Netherlands)

    Myhre, M.; Saiwari, Sitisaiyidah; Dierkes, Wilma K.; Noordermeer, Jacobus W.M.

    2012-01-01

    For both environmental and economic reasons, there is broad interest in recycling rubber and in the continued development of recycling technologies. The use of postindustrial materials is a fairly well-established and documented business. Much effort over the past decade has been put into dealing

  11. Planning logistics network for recyclables collection

    Directory of Open Access Journals (Sweden)

    Ratković Branislava

    2014-01-01

    Full Text Available Rapid urbanization, intensified industrialization, rise of income, and a more sophisticated form of consumerism are leading to an increase in the amount and toxicity of waste all over the world. Whether reused, recycled, incinerated or put into landfill sites, the management of household and industrial waste yield financial and environmental costs. This paper presents a modeling approach that can be used for designing one part of recycling logistics network through defining optimal locations of collection points, and possible optimal scheduling of vehicles for collecting recyclables. [Projekat Ministarstva nauke Republike Srbije, br. TR36005

  12. Recyclability assessment of nano-reinforced plastic packaging

    International Nuclear Information System (INIS)

    Sánchez, C.; Hortal, M.; Aliaga, C.; Devis, A.; Cloquell-Ballester, V.A.

    2014-01-01

    Highlights: • The study compares the recyclability of polymers with and without nanoparticles. • Visual appearance, material quality and mechanical properties are evaluated. • Minor variations in mechanical properties in R-PE and R-PP with nanoparticles. • Slight degradation of R-PET which affect mechanical properties. • Colour deviations in recycled PE, PP and PET in ranges higher that 0.3 units. - Abstract: Packaging is expected to become the leading application for nano-composites by 2020 due to the great advantages on mechanical and active properties achieved with these substances. As novel materials, and although there are some current applications in the market, there is still unknown areas under development. One key issue to be addressed is to know more about the implications of the nano-composite packaging materials once they become waste. The present study evaluates the extrusion process of four nanomaterials (Layered silicate modified nanoclay (Nanoclay1), Calcium Carbonate (CaCO 3 ), Silver (Ag) and Zinc Oxide (ZnO) as part of different virgin polymer matrices of polyethylene (PE), Polypropylene (PP) and Polyethyleneterephtalate (PET). Thus, the following film plastic materials: (PE–Nanoclay1, PE–CaCO 3 , PP–Ag, PET–ZnO, PET–Ag, PET–Nanoclay1) have been processed considering different recycling scenarios. Results on recyclability show that for PE and PP, in general terms and except for some minor variations in yellowness index, tensile modulus, tensile strength and tear strength (PE with Nanoclay1, PP with Ag), the introduction of nanomaterial in the recycling streams for plastic films does not affect the final recycled plastic material in terms of mechanical properties and material quality compared to conventional recycled plastic. Regarding PET, results show that the increasing addition of nanomaterial into the recycled PET matrix (especially PET–Ag) could influence important properties of the recycled material, due to a slight

  13. Recyclability assessment of nano-reinforced plastic packaging

    Energy Technology Data Exchange (ETDEWEB)

    Sánchez, C., E-mail: csanchez@itene.com [Sustainability Divison, Packaging, Transport and Logistics Research Institute, Albert Einstein 1, 46980 Paterna, Valencia (Spain); Hortal, M., E-mail: mhortal@itene.com [Sustainability Divison, Packaging, Transport and Logistics Research Institute, Albert Einstein 1, 46980 Paterna, Valencia (Spain); Aliaga, C., E-mail: caliaga@itene.com [Sustainability Divison, Packaging, Transport and Logistics Research Institute, Albert Einstein 1, 46980 Paterna, Valencia (Spain); Devis, A., E-mail: adevis@itene.com [Sustainability Divison, Packaging, Transport and Logistics Research Institute, Albert Einstein 1, 46980 Paterna, Valencia (Spain); Cloquell-Ballester, V.A., E-mail: cloquell@dpi.upv.es [Dpto. Proyectos de Ingeniería, Universitat Politècnica de València, Camino de Vera, 46022 Valencia (Spain)

    2014-12-15

    Highlights: • The study compares the recyclability of polymers with and without nanoparticles. • Visual appearance, material quality and mechanical properties are evaluated. • Minor variations in mechanical properties in R-PE and R-PP with nanoparticles. • Slight degradation of R-PET which affect mechanical properties. • Colour deviations in recycled PE, PP and PET in ranges higher that 0.3 units. - Abstract: Packaging is expected to become the leading application for nano-composites by 2020 due to the great advantages on mechanical and active properties achieved with these substances. As novel materials, and although there are some current applications in the market, there is still unknown areas under development. One key issue to be addressed is to know more about the implications of the nano-composite packaging materials once they become waste. The present study evaluates the extrusion process of four nanomaterials (Layered silicate modified nanoclay (Nanoclay1), Calcium Carbonate (CaCO{sub 3}), Silver (Ag) and Zinc Oxide (ZnO) as part of different virgin polymer matrices of polyethylene (PE), Polypropylene (PP) and Polyethyleneterephtalate (PET). Thus, the following film plastic materials: (PE–Nanoclay1, PE–CaCO{sub 3}, PP–Ag, PET–ZnO, PET–Ag, PET–Nanoclay1) have been processed considering different recycling scenarios. Results on recyclability show that for PE and PP, in general terms and except for some minor variations in yellowness index, tensile modulus, tensile strength and tear strength (PE with Nanoclay1, PP with Ag), the introduction of nanomaterial in the recycling streams for plastic films does not affect the final recycled plastic material in terms of mechanical properties and material quality compared to conventional recycled plastic. Regarding PET, results show that the increasing addition of nanomaterial into the recycled PET matrix (especially PET–Ag) could influence important properties of the recycled material, due to a

  14. The unrivalled expertise for Pu recycling

    International Nuclear Information System (INIS)

    Fournier, W.; Pouilloux, M.

    1997-01-01

    Relying on the outstanding performances of the reprocessing facilities and the growing fabrication facilities, the in-reactor Pu recycling program in France and in other European countries is steadily implemented and has reached full-scale industrial operation. The RCR strategy -Reprocessing, Conditioning and Recycling- developed by COGEMA is now a well proven industrial reality. In 1997, plutonium recycling through MOX fuel is a mature industry, with successful operational experience and large-scale fabrication plants. In this field, COGEMA is the main actor, on operating simultaneously three complete multidesign fuel production plants: MELOX plant (in Marcoule), CADARACHE plant and DESSEL plant (in Belgium). Present MOX production capacity available to COGEMA fits 175 tHM per year and will be extended to reach about 325 tHM in the year 2000, that will represent 75% of the total MOX fabrication capacity in Europe. The industrial mastery and the high production level in MOX production assured by high technology processes confers COGEMA an unrivalled expertise for Pu recycling. This allows COGEMA to be a major actor in Pu-based fuels in the coming second nuclear era with advanced fuel cycles. The paper depicts the steps of the progressive advance of COGEMA to reach the Pu recycling expertise. (author)

  15. Research methodology in used oil recycling

    International Nuclear Information System (INIS)

    Becker, D.A.

    1982-01-01

    Legislation and activities in the United States on the subject of used oil recycling have increased dramatically in the past several years. However, a substantial portion of both industry and government have some concerns about the lack of scientific and technical research and data on certain aspects of the quality and consistence of recycled petroleum oils, particularly re-refined engine oils. Further, there are some significant environmental concerns about pollution aspects of used oils and their recycling by-products and wastes. Since 1976, the (U.S.) National Bureau of Standards (NBS) has had a legislatively mandated program to''... develop test procedures for the determination of substantial equivalency of re-refined or otherwise processed used oil . . . with new oil for a particular end use'' (42 U.S. Code 6363c). The NBS research includes identification of problem areas in the characterization of used and recycled oils, research into new measurement methods for determination of novel constituents in these materials, and the development and evaluation of appropriate test procedures and standards for recycled oil products. Aspects of this research discussed in this paper include analysis of total elemental content and speciation studies on lead and on the halogens (chlorine and bromine) and hydrocarbon type characterization studies on lubricating oil fractions

  16. Hope: A further dimension for engaging family members of people with ABI.

    Science.gov (United States)

    Kuipers, Pim; Doig, Emmah; Kendall, Melissa; Turner, Ben; Mitchell, Marion; Fleming, Jennifer

    2014-01-01

    Family member engagement is increasingly recognised as an influential factor in the rehabilitation continuum following Acquired Brain Injury, including the inpatient setting and longer-term community integration phases. To explore the experiences of patients and family members about their involvement in brain injury rehabilitation. This study comprised individual and group interviews with 14 ex-patients and family members. Interviews explored effects of inpatient rehabilitation on family relationships. Interview audio recordings were analysed using an interpretive approach by two independent researchers. Findings clearly confirmed the significance of engaging family members in inpatient rehabilitation, and specifically reinforced the importance of informational, emotional, practical and peer support. However, the key finding of the study was the importance of hope, and the need for rehabilitation professionals to foster hope. Despite not having included any questions on this topic, all interviewees noted the importance of hope, some saw it as fundamental to positive outcomes, and many were unconvinced of rehabilitation professionals' concern to avoid false hope. Various dimensions of hope are explored. The study notes that hope has been identified as highly important in many areas beyond brain injury rehabilitation. Based on this small preliminary study, the issue of hope is seen as a key focus for future research.

  17. Adolescent Hopefulness in Tanzania: Street Youth, Former Street Youth, and School Youth

    Science.gov (United States)

    Nalkur, Priya G.

    2009-01-01

    This study compares hope in street youth, former street youth, and school youth (aged 12-18) in Tanzania. Responding to Snyder's hope theory, the author argues that not only personal agency but also the stability of living context (street, shelter, home) shapes hopefulness. Employing qualitative and quantitative analyses, the author presents a…

  18. Recycling and Networking

    Directory of Open Access Journals (Sweden)

    T. Bányai

    2004-01-01

    Full Text Available In recent years, the notion that for environmental and legislative reasons improvements The national environmental policies and practice, including recycling strategies, are desirable and in many cases might be economically beneficial has been gaining ground. Although according to recent surveys the state of the environment in Hungary is in line with average values of the European Union, the main challenge for the country is to achieve sustainability in economic, environmental and technological terms. With a view to accession to the European Union, a harmonisation strategy must be worked out and implemented. This harmonisation strategy includes not only legislative aspects, but also social, technological, financial and logistic considerations.Because of the high logistic costs of achieving closed loop recycling systems, the author focuses on logistic aspects and tasks of the improvement phases and concentrates on the possibilities of networking and co-operation. The paper describes some possible alternative solutions for co-operative recycling processes, to improve the following logistic parameters: delivery times, accuracy of supply, running times, utilization of capacities, stock quantities, flexibility, transparency of the system, high forwarding capability, quality of product. The logistic aspects of co-operation will be analysed from the viewpoint of a closed loop economy.

  19. Considerations in recycling contaminated scrap metal and rubble

    International Nuclear Information System (INIS)

    Kluk, A.F.; Hocking, E.K.

    1992-01-01

    Management options for the Department of Energy's increasing amounts of contaminated scrap metal and rubble include reuse as is, disposal, and recycling. Recycling, with its promise of resource recovery, virgin materials conservation, and land disposal minimization, emerges as a preferred management technique. Implementing a cost effective recycling program requires resolution of several issues including: establishing release limits for contaminants, controlling use of recycled materials creating effective public communication programs; developing economical, reliable assay technologies; managing secondary waste streams, expanding availability of unrestricted markets; and solving conflicting legal considerations

  20. Pre-Saturation Technique of the Recycled Aggregates: Solution to the Water Absorption Drawback in the Recycled Concrete Manufacture †

    Science.gov (United States)

    García-González, Julia; Rodríguez-Robles, Desirée; Juan-Valdés, Andrés; Morán-del Pozo, Julia Mª; Guerra-Romero, M. Ignacio

    2014-01-01

    The replacement of natural aggregates by recycled aggregates in the concrete manufacturing has been spreading worldwide as a recycling method to counteract the large amount of construction and demolition waste. Although legislation in this field is still not well developed, many investigations demonstrate the possibilities of success of this trend given that concrete with satisfactory mechanical and durability properties could be achieved. However, recycled aggregates present a low quality compared to natural aggregates, the water absorption being their main drawback. When used untreated in concrete mix, the recycled aggregate absorb part of the water initially calculated for the cement hydration, which will adversely affect some characteristics of the recycled concrete. This article seeks to demonstrate that the technique of pre-saturation is able to solve the aforementioned problem. In order to do so, the water absorption of the aggregates was tested to determine the necessary period of soaking to bring the recycled aggregates into a state of suitable humidity for their incorporation into the mixture. Moreover, several concrete mixes were made with different replacement percentages of natural aggregate and various periods of pre-saturation. The consistency and compressive strength of the concrete mixes were tested to verify the feasibility of the proposed technique. PMID:28788188

  1. Technological, Economic, and Environmental Optimization of Aluminum Recycling

    Science.gov (United States)

    Ioana, Adrian; Semenescu, Augustin

    2013-08-01

    The four strategic directions (referring to the entire life cycle of aluminum) are as follows: production, primary use, recycling, and reuse. Thus, in this work, the following are analyzed and optimized: reducing greenhouse gas emissions from aluminum production, increasing energy efficiency in aluminum production, maximizing used-product collection, recycling, and reusing. According to the energetic balance at the gaseous environment level, the conductive transfer model is also analyzed through the finished elements method. Several principles of modeling and optimization are presented and analyzed: the principle of analogy, the principle of concepts, and the principle of hierarchization. Based on these principles, an original diagram model is designed together with the corresponding logic diagram. This article also presents and analyzes the main benefits of aluminum recycling and reuse. Recycling and reuse of aluminum have the main advantage that it requires only about 5% of energy consumed to produce it from bauxite. The aluminum recycling and production process causes the emission of pollutants such as dioxides and furans, hydrogen chloride, and particulate matter. To control these emissions, aluminum recyclers are required to comply with the National Emission Standards for Hazardous Air Pollutants for Secondary Aluminum Production. The results of technological, economic, and ecological optimization of aluminum recycling are based on the criteria function's evaluation in the modeling system.

  2. Childhood Lead Exposure from Battery Recycling in Vietnam.

    Science.gov (United States)

    Daniell, William E; Van Tung, Lo; Wallace, Ryan M; Havens, Deborah J; Karr, Catherine J; Bich Diep, Nguyen; Croteau, Gerry A; Beaudet, Nancy J; Duy Bao, Nguyen

    2015-01-01

    Battery recycling facilities in developing countries can cause community lead exposure. To evaluate child lead exposure in a Vietnam battery recycling craft village after efforts to shift home-based recycling outside the village. This cross-sectional study evaluated 109 children in Dong Mai village, using blood lead level (BLL) measurement, parent interview, and household observation. Blood samples were analyzed with a LeadCare II field instrument; highest BLLs (≥45 μg/dL) were retested by laboratory analysis. Surface and soil lead were measured at 11 households and a school with X-ray fluorescence analyzer. All children had high BLLs; 28% had BLL ≥45 μg/dL. Younger age, family recycling, and outside brick surfaces were associated with higher BLL. Surface and soil lead levels were high at all tested homes, even with no recycling history. Laboratory BLLs were lower than LeadCare BLLs, in 24 retested children. In spite of improvements, lead exposure was still substantial and probably associated with continued home-based recycling, legacy contamination, and workplace take-home exposure pathways. There is a need for effective strategies to manage lead exposure from battery recycling in craft villages. These reported BLL values should be interpreted cautiously, although the observed field-laboratory discordance may reflect bias in laboratory results.

  3. FLY ASH RECYCLE IN DRY SCRUBBING

    Science.gov (United States)

    The paper describes the effects of fly ash recycle in dry scrubbing. (Previous workers have shown that the recycle of product solids improves the utilization of slaked lime--Ca(OH)2--for sulfur dioxide (SO2) removal by spray dryers with bag filters.) In laboratory-scale experimen...

  4. Linguistic Recycling and the Open Community.

    Science.gov (United States)

    Dasgupta, Probal

    2001-01-01

    Examines linguistic recycling in the context of domestic Esperanto use. Argues that word-meaning recycling reflects the same fundamental principles as sentential recursion, and that a linguistics theoretically sensitive to these principles strengthens practical efforts towards the social goal of an open speech community. (Author/VWL)

  5. Integrated Nuclear Recycle Plant

    International Nuclear Information System (INIS)

    Patodi, Anuj; Parashar, Abhishek; Samadhiya, Akshay K.; Ray, Saheli; Dey, Mitun; Singh, K.K.

    2017-01-01

    Nuclear Recycle Board (NRB), Tarapur proposes to set up an 'Integrated Nuclear Recycle Plant' at Tarapur. This will be located in the premises of BARC facilities. The project location is at coastal town of Tarapur, 130 Km north of Mumbai. Project area cover of INRP is around 80 hectares. The plant will be designed to process spent fuel received from Pressurized Heavy Water Reactors (PHWRs). This is the first large scale integrated plant of the country. INRP will process spent fuel obtained from indigenous nuclear power plants and perform left over nuclear waste disposal

  6. Dubai: a City of Hope?

    Directory of Open Access Journals (Sweden)

    Lina Abirafeh

    2007-07-01

    Full Text Available The City of Hope is an organisation offering refuge for abused women in Dubai, the largest city of the United Arab Emirates. Dubai has started to acknowledge the social problems accompanying its phenomenal economic growth but is it doing enough to tackle the scourge of human trafficking?

  7. Metallic mercury recycling. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Beck, M.A.

    1994-07-01

    Metallic mercury is known to be a hazardous material and is regulated as such. The disposal of mercury, usually by landfill, is expensive and does not remove mercury from the environment. Results from the Metallic Mercury Recycling Project have demonstrated that metallic mercury is a good candidate for reclamation and recycling. Most of the potential contamination of mercury resides in the scum floating on the surface of the mercury. Pinhole filtration was demonstrated to be an inexpensive and easy way of removing residues from mercury. The analysis method is shown to be sufficient for present release practices, and should be sufficient for future release requirements. Data from tests are presented. The consistently higher level of activity of the filter residue versus the bulk mercury is discussed. Recommendations for the recycling procedure are made.

  8. Metallic mercury recycling. Final report

    International Nuclear Information System (INIS)

    Beck, M.A.

    1994-01-01

    Metallic mercury is known to be a hazardous material and is regulated as such. The disposal of mercury, usually by landfill, is expensive and does not remove mercury from the environment. Results from the Metallic Mercury Recycling Project have demonstrated that metallic mercury is a good candidate for reclamation and recycling. Most of the potential contamination of mercury resides in the scum floating on the surface of the mercury. Pinhole filtration was demonstrated to be an inexpensive and easy way of removing residues from mercury. The analysis method is shown to be sufficient for present release practices, and should be sufficient for future release requirements. Data from tests are presented. The consistently higher level of activity of the filter residue versus the bulk mercury is discussed. Recommendations for the recycling procedure are made

  9. Assessment of Economic Condition Impact on People's Awareness, Attitudes and Practices Towards Recycling of Solid Wastes, a Case Study in Tabriz

    Directory of Open Access Journals (Sweden)

    Farzaneh Baghal Asghari

    2015-08-01

    Full Text Available Background and Objectives : Waste production is an integral part of human life. Besides reduction in waste production, one of the most important strategies solid waste management is solid waste recycling which has environmental and economic benefits. The aim of the present study was to evaluate the knowledge, attitude and practice (KAP of Tabriz citizens to participate in recycling. Material and Methods : This cross-sectional study involved 450 samples, in three different regions of Tabriz with high, average and low income levels (150 from each district, selected by systematic sampling. The relevant data were collected by questionnaires and were analyzed in SPSS and Excel software.  Results : The results of this study showed that the majority of Tabriz citizens had acceptable information about waste and recycling. Average knowledge, attitude and practices of the various regions were 86.8%, 75.6% and 59% respectively. There was no significant association in this field in three different regions (p.value > 0.05. Comparing the regions, education and welfare of the residents had no effect on the willingness to participate in recycling programs. : Conclusion: The results of the study reflect the community's readiness to accept the change and management of Municipal Solid Waste (MSW in the recycling programs. Consequently, recycling would be implemented successfully if organizations (e.g. municipalities, health center, education... have been coordinated and collaborated with citizens. ​

  10. Organic household waste - incineration or recycling

    International Nuclear Information System (INIS)

    2003-01-01

    The Danish Environmental Protection Agency has carried out a cost benefit analysis of the consequences of increasing recycling of organic household waste. In the cost benefit analysis both the economic consequences for the affected parties and the welfare-economic consequences for the society as a whole have been investigated. In the welfare-economic analysis the value of the environmental effects has been included. The analysis shows that it is more expensive for the society to recycle organic household waste by anaerobic digestion or central composting than by incineration. Incineration is the cheapest solution for the society, while central composting is the most expensive. Furthermore, technical studies have shown that there are only small environmental benefits connected with anaerobic digestion of organic waste compared with incineration of the waste. The primary reason for recycling being more expensive than incineration is the necessary, but cost-intensive, dual collection of the household waste. Treatment itself is cheaper for recycling compared to incinerating. (BA)

  11. Synaptic activity regulates AMPA receptor trafficking through different recycling pathways

    Science.gov (United States)

    Zheng, Ning; Jeyifous, Okunola; Munro, Charlotte; Montgomery, Johanna M; Green, William N

    2015-01-01

    Changes in glutamatergic synaptic strength in brain are dependent on AMPA-type glutamate receptor (AMPAR) recycling, which is assumed to occur through a single local pathway. In this study, we present evidence that AMPAR recycling occurs through different pathways regulated by synaptic activity. Without synaptic stimulation, most AMPARs recycled in dynamin-independent endosomes containing the GTPase, Arf6. Few AMPARs recycled in dynamin-dependent endosomes labeled by transferrin receptors (TfRs). AMPAR recycling was blocked by alterations in the GTPase, TC10, which co-localized with Arf6 endosomes. TC10 mutants that reduced AMPAR recycling had no effect on increased AMPAR levels with long-term potentiation (LTP) and little effect on decreased AMPAR levels with long-term depression. However, internalized AMPAR levels in TfR-containing recycling endosomes increased after LTP, indicating increased AMPAR recycling through the dynamin-dependent pathway with synaptic plasticity. LTP-induced AMPAR endocytosis is inconsistent with local recycling as a source of increased surface receptors, suggesting AMPARs are trafficked from other sites. DOI: http://dx.doi.org/10.7554/eLife.06878.001 PMID:25970033

  12. On Sinking and Swimming: The Dialectic of Hope, Hopelessness, and Acceptance in Terminal Cancer

    Science.gov (United States)

    Sachs, Emily; Kolva, Elissa; Pessin, Hayley; Rosenfeld, Barry; Breitbart, William

    2016-01-01

    For terminally ill cancer patients, hope and hopelessness are constructs that significantly impact the quality of life. The aim of this study was to examine the relationship between hope and hopelessness in advanced cancer and to identify factors that maintain hope and increase vulnerability to hopelessness. Semistructured interviews were conducted with 22 terminally ill cancer patients. Interview transcripts were analyzed using thematic content analysis to identify patient definitions of these terms and associated cognitions and emotions. Hope and hopelessness were identified as distinct, often co-occurring, and dialectically interacting constructs. The relationship between hope and hopelessness often balanced on acceptance, perceived as diametrically opposed to hopelessness, and conducive to redirecting hope toward new goals. Positive interpersonal relationships enhanced hope, and uncontrolled physical pain increased vulnerability to hopelessness. PMID:22556280

  13. Waste management at the Karlsruhe Nuclear Research Center

    International Nuclear Information System (INIS)

    Hoehlein, G.; Lins, W.

    1982-01-01

    In the Karlsruhe Nuclear Research Center the responsibility for waste management is concentrated in the Decontamination Department which serves to collect and transport all liquid waste and solid material from central areas in the center for further waste treatment, clean radioactive equipment for repair and re-use or for recycling of material, remove from the liquid effluents any radioactive and chemical pollutants as specified in legislation on the protection of waters, convert radioactive wastes into mechanically and chemically stable forms allowing them to be transported into a repository. (orig./RW)

  14. Influence of hope, social support, and self-esteem in early stage dementia.

    Science.gov (United States)

    Cotter, Valerie T; Gonzalez, Elizabeth W; Fisher, Kathleen; Richards, Kathy C

    2018-02-01

    Background People in the early stages of dementia adjust to the illness through stages of awareness, coping, and evaluation. Studies have found that hope, social support, and self-esteem facilitate coping, adjustment, and adaptation in chronic illness. Objective The purpose of this descriptive study was to examine the relationships between hope, social support, and self-esteem in individuals with early stage dementia. Methods Data were obtained from 53 individuals with early stage dementia. The scores on the Herth Hope Index, Social Support Questionnaire Short-Form, and the State Self-Esteem Scale were analyzed using linear regression. Results Hope was moderately associated with self-esteem ( r = .49, p self-esteem and was a key component in predicting self-esteem. No significant relationship was found between social support and self-esteem. Conclusion Findings suggest that hope may be an important factor to help individuals manage potential threats to self-esteem in the experience of early stage dementia. Strategies to inspire hope and then enhance self-esteem are promising for individuals living with early stage dementia.

  15. Potential GTCC LLW sealed radiation source recycle initiatives

    International Nuclear Information System (INIS)

    Fischer, D.

    1992-04-01

    This report suggests 11 actions that have the potential to facilitate the recycling (reuse or radionuclide) of surplus commercial sealed radiation sources that would otherwise be disposed of as greater-than-Class C low-level radioactive waste. The suggestions serve as a basis for further investigation and discussion between the Department of Energy, Nuclear Regulatory Commission, Agreement States, and the commercial sector. Information is also given that describes sealed sources, how they are used, and problems associated with recycling, including legal concerns. To illustrate the nationwide recycling potential, Appendix A gives the estimated quantity and application information for sealed sources that would qualify for disposal in commercial facilities if not recycle. The report recommends that the Department of Energy initiate the organization of a forum to explore the suggested actions and other recycling possibilities

  16. A slow start at the beginning of the recycling chain : How to make consumers recycle their mobile phones?

    OpenAIRE

    Pietikäinen, Johanna

    2007-01-01

    The aim of this research is to find out why people recycle their old mobile phones lazily. The interest to recycle electronic equipment has enlarged in past few years; the reason for this is the aim of the European Union (EU) to increase recycling as a whole. In the background, there is the objective of the EU to reduce waste by delegating the responsibility of the products-waste handling to producers. The European Parliament and the Council have passed a directive on Waste Electrical and Ele...

  17. Utility of Recycled Bedding for Laboratory Rodents

    OpenAIRE

    Miyamoto, Toru; Li, Zhixia; Kibushi, Tomomi; Okano, Shinya; Yamasaki, Nakamichi; Kasai, Noriyuki

    2009-01-01

    Animal facilities generate a large amount of used bedding containing excrement as medical waste. We developed a recycling system for used bedding that involves soft hydrothermal processing. In this study, we examined the effects of bedding type on growth, hematologic and serum biochemical values, and organ weights of female and male mice reared on either recycled or fresh bedding from 3 to 33 wk of age. Neither growth nor physiology differed between mice housed on recycled bedding compared wi...

  18. Parent and Friend Social Support and Adolescent Hope.

    Science.gov (United States)

    Mahon, Noreen E; Yarcheski, Adela

    2017-04-01

    The purpose of this study was to conduct two meta-analyses. The first examined social support from parents in relation to adolescent hope, and the second examined social support from friends in relation to adolescent hope. Using Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines for the literature reviewed, nine published studies or doctoral dissertations completed between 1990 and 2014 met the inclusion criteria. Using meta-analytic techniques and the mean weighted r statistic, the results indicated that social support from friends had a stronger mean effect size (ES = .31) than social support from parents (ES = .21); there was a statistically significant difference between the two ESs. Two of the four moderators for the parent social support-adolescent hope relationship were statistically significant. They were quality score and health status. Implications for school nurses and nurses in all settings are addressed, and conclusions are drawn based on the findings.

  19. Recycled Concrete as Aggregate for Structural Concrete Production

    Directory of Open Access Journals (Sweden)

    Mirjana Malešev

    2010-04-01

    Full Text Available A comparative analysis of the experimental results of the properties of fresh and hardened concrete with different replacement ratios of natural with recycled coarse aggregate is presented in the paper. Recycled aggregate was made by crushing the waste concrete of laboratory test cubes and precast concrete columns. Three types of concrete mixtures were tested: concrete made entirely with natural aggregate (NAC as a control concrete and two types of concrete made with natural fine and recycled coarse aggregate (50% and 100% replacement of coarse recycled aggregate. Ninety-nine specimens were made for the testing of the basic properties of hardened concrete. Load testing of reinforced concrete beams made of the investigated concrete types is also presented in the paper. Regardless of the replacement ratio, recycled aggregate concrete (RAC had a satisfactory performance, which did not differ significantly from the performance of control concrete in this experimental research. However, for this to be fulfilled, it is necessary to use quality recycled concrete coarse aggregate and to follow the specific rules for design and production of this new concrete type.

  20. Phosphate recycling in the phosphorus industry

    NARCIS (Netherlands)

    Schipper, W.J.; Klapwijk, A.; Potjer, A.; Rulkens, W.H.; Temmink, B.G.; Kiestra, F.D.G.; Lijmbach, A.C.M.

    2001-01-01

    The feasibility of phosphate recycling in the white phosphorus production process is discussed. Several types of materials may be recycled, provided they are dry inorganic materials, low in iron, copper and zinc. Sewage sludge ash may be used if no iron is used for phosphate precipitation in the

  1. Joy, Distress, Hope, and Fear in Reinforcement Learning (Extended Abstract)

    NARCIS (Netherlands)

    Jacobs, E.J.; Broekens, J.; Jonker, C.M.

    2014-01-01

    In this paper we present a mapping between joy, distress, hope and fear, and Reinforcement Learning primitives. Joy / distress is a signal that is derived from the RL update signal, while hope/fear is derived from the utility of the current state. Agent-based simulation experiments replicate

  2. Status report: conceptual fuel cycle studies for the Hanford Nuclear Energy Center

    International Nuclear Information System (INIS)

    Merrill, E.T.; Fleischman, R.M.

    1975-07-01

    A summary is presented of the current status of studies to determine the logistics of onsite plutonium recycle and the timing involved in introducing the associated reprocessing and fabrication fuel cycle facilities at the Hanford Nuclear Energy Center

  3. Multiple recycling of plutonium in advanced PWRs

    International Nuclear Information System (INIS)

    Kloosterman, J.L.

    1998-04-01

    The influence of the moderator-to-fuel ratio in MOX fueled PWRs on the moderator void coefficient, the fuel temperature coefficient, the moderator temperature coefficient, the boron reactivity worth, the critical boron concentration, the mean neutron generation time and the effective delayed neutron fraction has been assessed. Increasing the moderator-to-fuel ratio to values larger than three, gives a moderator void coefficient sufficiently large to recycle the plutonium at least four times. Scenario studies show that four times recycling of plutonium in PWRs reduces the plutonium mass produced with a factor of three compared with a reference once-through reactor park, but that the americium and curium production triple. If the minor actinides and the remaining plutonium after four times recycling are disposed of, the reduction of the radiotoxicity reaches only a factor of two. This factor increases to five at the maximum when the plutonium is further recycled. Recycling of americium and curium is needed to further reduce the radiotoxicity of the spent fuel. 4 refs

  4. INEL metal recycle annual report, FY-94

    International Nuclear Information System (INIS)

    Bechtold, T.E.

    1994-09-01

    In 1992, the mission of the Idaho Chemical Processing Plant was changed from reprocessing of spent nuclear fuels to development of technologies for conditioning of spent nuclear fuels and other high-level wastes for disposal in a geologic repository. In addition, the Department of Energy (DOE) directed Idaho National Engineering Laboratory (INEL) to develop a program plan addressing the management of radioactive contaminated scrap metal (RSM) within the DOE complex. Based on discussions with the EM-30 organization, the INEL Metal Recycle program plan was developed to address all issues of RSM management. Major options considered for RSM management were engineered interim storage, land disposal as low-level waste, and beneficial reuse/recycle. From its inception, the Metal Recycle program has emphasized avoidance of storage and disposal costs through beneficial reuse of RSM. The Metal Recycle program plan includes three major activities: Site-by-site inventory of RSM resources; validation of technologies for conversion of RSM to usable products; and identification of parties prepared to participate in development of a RSM recycle business

  5. A recycling molecular beam reactor

    International Nuclear Information System (INIS)

    Prada-Silva, G.; Haller, G.L.; Fenn, J.B.

    1974-01-01

    In a Recycling Molecular Beam Reactor, RMBR, a beam of reactant gas molecules is formed from a supersonic free jet. After collision with a target the molecules pass through the vacuum pumps and are returned to the nozzle source. Continuous recycling permits the integration of very small reaction probabilities into measurable conversions which can be analyzed by gas chromatography. Some preliminary experiments have been carried out on the isomerization of cyclopropane

  6. The alternative means process for the Port Hope Area Initiative

    International Nuclear Information System (INIS)

    O'Neill, J.E.; Campbell, D.; Rossi, R.

    2006-01-01

    In March of 2001, the Government of Canada, the Town of Port Hope, Hope Township and the Municipality of Clarington agreed to the cleanup and long-term management of historic, low-level radioactive waste materials in these communities. The agreement identified conceptual designs for long-term management facilities for the wastes. Two environmental assessments (EAs) of the proposed long-term management facilities have been initiated as part of the Port Hope Area Initiative (PHAI); namely the Port Hope Long-Term Low-Level Radioactive Waste Management Project and the Port Granby Long-Term Low-Level Radioactive Waste Management Project. A requirement set out in the Scope for the EAs is the consideration of technically and economically feasible Alternative Means of carrying out the PHAI projects. Alternative Means are the various ways that the projects could be implemented, such as alternative technologies, sites, transportation routes, etc. Early in the overall EA processes the Low-Level Radioactive Waste Management Office (LLRWMO), which is responsible for undertaking the EAs, recognized that it was facing a significant challenge; namely, the successful completion of a clear, technically sound and defendable Alternative Means analysis, including consultation with and acceptance by the community. This would be a fundamental requirement for the success of the PHAI EAs. A further challenge was to develop consistent assessment methodologies for the Port Hope and Port Granby projects, which were both initiated under the PHAI at the same time. Although similar in many respects, the two projects have major differences. For example, the Port Hope Project, with more sources of contamination within a built- up urban area is more complex and has a broader range of potential solutions to be considered than the rural Port Granby Project. This paper describes how the LLRWMO met that challenge, developed and implemented a successful Alternative Means process and presents the

  7. Logistics Mode and Network Planning for Recycle of Crop Straw Resources

    OpenAIRE

    Zhou, Lingyun; Gu, Weidong; Zhang, Qing

    2013-01-01

    To realize the straw biomass industrialized development, it should speed up building crop straw resource recycle logistics network, increasing straw recycle efficiency, and reducing straw utilization cost. On the basis of studying straw recycle process, this paper presents innovative concept and property of straw recycle logistics network, analyses design thinking of straw recycle logistics network, and works out straw recycle logistics mode and network topological structure. Finally, it come...

  8. Optical absorption in recycled waste plastic polyethylene

    Science.gov (United States)

    Aji, M. P.; Rahmawati, I.; Priyanto, A.; Karunawan, J.; Wati, A. L.; Aryani, N. P.; Susanto; Wibowo, E.; Sulhadi

    2018-03-01

    We investigated the optical properties of UV spectrum absorption in recycled waste plastic from polyethylene polymer type. Waste plastic polyethylene showed an optical spectrum absorption after it’s recycling process. Spectrum absorption is determined using spectrophotometer UV-Nir Ocean Optics type USB 4000. Recycling method has been processed using heating treatment around the melting point temperature of the polyethylene polymer that are 200°C, 220°C, 240°C, 260°C, and 280°C. In addition, the recycling process was carried out with time variations as well, which are 1h, 1.5h, 2h, and 2.5h. The result of this experiment shows that recycled waste plastic polyethylene has a spectrum absorption in the ∼ 340-550 nm wavelength range. The absorbance spectrum obtained from UV light which is absorbed in the orbital n → π* and the orbital π → π*. This process indicates the existence of electron transition phenomena. This mechanism is affected by the temperature and the heating time where the intensity of absorption increases and widens with the increase of temperature and heating time. Furthermore this study resulted that the higher temperature affected the enhancement of the band gap energy of waste plastic polyethylene. These results show that recycled waste plastic polyethylene has a huge potential to be absorber materials for solar cell.

  9. Paper recycling framework, the "Wheel of Fiber".

    Science.gov (United States)

    Ervasti, Ilpo; Miranda, Ruben; Kauranen, Ilkka

    2016-06-01

    At present, there is no reliable method in use that unequivocally describes paper industry material flows and makes it possible to compare geographical regions with each other. A functioning paper industry Material Flow Account (MFA) that uses uniform terminology and standard definitions for terms and structures is necessary. Many of the presently used general level MFAs, which are called frameworks in this article, stress the importance of input and output flows but do not provide a uniform picture of material recycling. Paper industry is an example of a field in which recycling plays a key role. Additionally, terms related to paper industry recycling, such as collection rate, recycling rate, and utilization rate, are not defined uniformly across regions and time. Thus, reliably comparing material recycling activity between geographical regions or calculating any regional summaries is difficult or even impossible. The objective of this study is to give a partial solution to the problem of not having a reliable method in use that unequivocally describes paper industry material flows. This is done by introducing a new material flow framework for paper industry in which the flow and stage structure supports the use of uniform definitions for terms related to paper recycling. This new framework is termed the Detailed Wheel of Fiber. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Recycling systems for BWR type reactors

    International Nuclear Information System (INIS)

    Takagi, Akio; Yamamoto, Fumiaki; Fukumoto, Ryuji.

    1986-01-01

    Purpose: To stabilize the coolant flowing characteristics and reactor core reactivity. Constitution: The recycling system in a BWR type reactor comprises a recycling pump disposed to the outside of a reactor pressure vessel, a ring header connected to the recycling pump through main pipe ways, and a plurality of pipes branched from and connected with the ring header and connected to a plurality of jet pumps within the pressure vessel. Then, by making the diameter for the pipeways of each of the branched pipes different from each other, the effective cross-sectional area is varied to thereby average the coolant flow rate supplied to each of the jet pumps. (Seki, T.)

  11. Development of recycling processes for clean rejected MOX fuel pellets

    International Nuclear Information System (INIS)

    Khot, P.M.; Singh, G.; Shelke, B.K.; Surendra, B.; Yadav, M.K.; Mishra, A.K.; Afzal, Mohd.; Panakkal, J.P.

    2014-01-01

    Highlights: • Dry and wet (MWDD) methods were developed for 100% recycling of CRO (0.4–44% PuO 2 ). • Dry method showed higher productivity and comparable powder/product characteristics. • MWDD batches demonstrated improved powder/product characteristics to that of virgin. • Second/multiple recycling is possible with MWDD with better powder/product characteristics. • MWDD batches prepared by little milling showed better macroscopic homogeneity to that of virgin. - Abstract: The dry and wet recycling processes have been developed for 100% recycling of Clean Reject Oxide (CRO) generated during the fabrication of MOX fuel, as CRO contains significant amount of plutonium. Plutonium being strategic material need to be circumvented from its proliferation issues related to its storage for long period. It was difficult to recycle CRO containing higher Pu content even with multiple oxidation and reduction steps. The mechanical recycling comprising of jaw crushing and sieving has been coupled with thermal pulverization for recycling CRO with higher Pu content in dry recycling technique. In wet recycling, MicroWave Direct Denitration (MWDD) technique has been developed for 100% recycling of CRO. The powder prepared by dry and wet (MWDD) recycling techniques was characterized by XRD and BET techniques and their effects on the pellets were evaluated. (U,21%Pu)O 2 pellets fabricated from virgin powder and MWDD were characterized using optical microscopy and α-autoradiography and the results obtained were compared

  12. Climate change considerations for the Port Hope area initiative

    International Nuclear Information System (INIS)

    Kirklady, J.; Morassutti, M.; Tamm, J.; Coutts, P.; Chambers, D.

    2006-01-01

    The Port Hope Area Initiative (PHAI) is a community-based program intended to develop a safe and long-term (approximately 500 years) solution for the management of historic low-level radioactive waste (LLRW) that has been present in the Port Hope area for many years. The PHAI undertakings involve the construction and management of two Long-Term Low-Level Radioactive Waste Management Facilities (referred to as the LTWMFs) in Port Hope and in Port Granby. These undertakings are currently undergoing detailed examination through the Environmental Screening process under the Canadian Environmental Assessment Act. The purpose of the study described in this paper was to provide information necessary to satisfy the requirements of the Scope of Environmental Assessment for the Port Hope and Port Granby Projects. In particular, the purpose of the study was to satisfy the requirements to evaluate greenhouse gas (GHG) emissions from the proposed PHAI initiatives and to evaluate the potential effect of climate change parameters on the two Projects. The Port Hope and Port Granby Projects will contribute to Ontario's GHG emission inventory due to vehicle exhaust from excavation equipment and haul trucks during the construction phase of the LTWMFs. The construction phase of the Projects is of relatively short duration, and the contribution of GHGs from each Project was determined to be insignificant compared to Ontario's GHG emissions from the Construction and Transportations sectors. The proposed project elements associated with the Port Hope and Port Granby Projects were each evaluated with respect to potential sensitivities to future change in climate parameters. Considering the potential changes to climate, a screening analysis of each element of the LTWMFs was undertaken. Because it is considered likely that the current design level storms will be exceeded within the next 500 years, it was determined that the storm water management system was potentially sensitive to changes

  13. Hope matters to the glycemic control of adolescents and young adults with type 1 diabetes.

    Science.gov (United States)

    Santos, Fábio R M; Sigulem, Daniel; Areco, Kelsy C N; Gabbay, Monica A L; Dib, Sergio A; Bernardo, Viviane

    2015-05-01

    This study investigated the association of hope and its factors with depression and glycemic control in adolescents and young adults with type 1 diabetes. A total of 113 patients were invited to participate. Significant negative correlations were found between hope and HbA1c and also between hope and depression. Hope showed a significant association with HbA1c and depression in the stepwise regression model. Among the hope factors, "inner positive expectancy" was significantly associated with HbA1c and depression. This study supports that hope matters to glycemic control and depression. Intervention strategies focusing on hope should be further explored. © The Author(s) 2015.

  14. Sustainable recycling technologies for Solar PV off-grid system

    Science.gov (United States)

    Uppal, Bhavesh; Tamboli, Adish; Wubhayavedantapuram, Nandan

    2017-11-01

    Policy makers throughout the world have accepted climate change as a repercussion of fossil fuel exploitation. This has led the governments to integrate renewable energy streams in their national energy mix. PV off-grid Systems have been at the forefront of this transition because of their permanently increasing efficiency and cost effectiveness. These systems are expected to produce large amount of different waste streams at the end of their lifetime. It is important that these waste streams should be recycled because of the lack of available resources. Our study found that separate researches have been carried out to increase the efficiencies of recycling of individual PV system components but there is a lack of a comprehensive methodical research which details efficient and sustainable recycling processes for the entire PV off-grid system. This paper reviews the current and future recycling technologies for PV off-grid systems and presents a scheme of the most sustainable recycling technologies which have the potential for adoption. Full Recovery End-of-Life Photovoltaic (FRELP) recycling technology can offer opportunities to sustainably recycle crystalline silicon PV modules. Electro-hydrometallurgical process & Vacuum technologies can be used for recovering lead from lead acid batteries with a high recovery rate. The metals in the WEEE can be recycled by using a combination of biometallurgical technology, vacuum metallurgical technology and other advanced metallurgical technologies (utrasonical, mechano-chemical technology) while the plastic components can be effectively recycled without separation by using compatibilizers. All these advanced technologies when used in combination with each other provide sustainable recycling options for growing PV off-grid systems waste. These promising technologies still need further improvement and require proper integration techniques before implementation.

  15. Recycling of concrete generated from Nuclear Power Plant dismantling

    International Nuclear Information System (INIS)

    Ogawa, Hideo; Nawa, Toyoharu; Ishikura, Takeshi; Tanaka, Hiroaki

    2013-01-01

    Reactor decommissioning required various technologies such as dismantling of facilities, decontamination, radioactivity measurement and recycling of dismantling wastes. This article discussed recycling of demolished concrete wastes. Dismantling of reactor building of large one unit of nuclear power plants would generate about 500 K tons of concrete wastes, about 98% of which was non-radioactive and could be used as base course material or backfill material after crushed to specified particle size. Since later part of 1990s, high quality recycled aggregate with specified limit of bone-dry density, water absorptivity and amount of fine aggregate had been developed from demolished concrete with 'Heat and rubbing method', 'Eccentric rotor method' and 'Screw grinding method' so as to separate cements attached to aggregate. Recycled aggregates were made from concrete debris with 'Jaw crusher' to particle size less than 40 mm and then particle size control or grinded by various grinding machines. Recycled fine aggregates made from crushing would have fragile site with cracks, air voids and bubbles. The author proposed quality improvement method to selectively separate fragile defects from recycled aggregates using weak grinding force, leaving attached pastes much and preventing fine particle generation as byproducts. This article outlined experiments to improve quality of recycled fine aggregates and their experimental results confirmed improvement of flow ability and compressive strength of mortal using recycled fine aggregates using 'Particle size selector' and 'Ball mill' so as to remove their fragile parts less than 2%. Mortal made from recycled fine aggregate could also prevent permeation of chloride ion. Recycled aggregate could be used for concrete instead of natural aggregate. (T. Tanaka)

  16. Outcome Evaluation of the Hands-On Parent Empowerment (HOPE) Program

    Science.gov (United States)

    Leung, Cynthia; Tsang, Sandra; Dean, Suzanne

    2011-01-01

    This study evaluated the effectiveness of the HOPE program. Participants included 120 Chinese new immigrant parents with preschool children in Hong Kong from 13 preschools which were randomized into intervention group (HOPE) and comparison group (6-session parent education program). Parent participants completed measures on child behavior,…

  17. Hope in Civic Action: To Be Optimistic and Non-Prejudicial

    Science.gov (United States)

    Ferrari, Joseph R.; Haq, Arsalan; Williams, Shannon M.

    2014-01-01

    The present study explored perceptions of hope for social change through civic engagement. Psychology majors, active in campus clubs and organizations (n = 52; M age = 19 years old) completed survey measures predicting hopeful (agency and pathways) tendencies by positive personality qualities, such as positive perceptions of life, being…

  18. A Study on the Future Issues Regarding the Small Home Appliance Recycling Law -Based on Comparison with the Other Recycling-Related Laws-

    OpenAIRE

    小林, 寛

    2014-01-01

    The Small Home Appliance Recycling Law was enacted in August 2012 and took effect in April 2013 for the purpose of collecting and recycling valuable metals included in used small home appliances such as mobile phones. This Law serves as a promotion scheme, which encourages parties concerned to join the system on a voluntary basis and implements recycling based on the current situation in each region under the cooperation among parties, unlike the Home Appliance Recycling Law enacted in 1998 t...

  19. Recycling carbon revenues: transforming costs into opportunities

    International Nuclear Information System (INIS)

    Vaidyula, Manasvini; Alberola, Emilie

    2016-01-01

    Governments worldwide generated $26 billion in 2015 in carbon pricing revenues. The benefits and co-benefits of carbon pricing can be enhanced by recycling carbon revenues. Revenue allocation decisions made by governments are vital as these revenues can help shift the narrative on carbon pricing from 'burden to benefit'. Existing carbon pricing schemes can provide useful feedback on revenue recycling. A well-positioned decision-making and governing framework is required to ensure the efficient recycling of carbon revenues

  20. Supporting Sustainability through Recycling on Office Premises

    OpenAIRE

    Sierra Quiros, Maria

    2016-01-01

    This thesis is about recycling at the Deloitte office. Recycling of office material can be considered as a rather easy way to influence aspects of sustainability. The starting point for this thesis was to give support to Deloitte´s Green Agenda team, who’s aim is to consider recycling and sustainability from business perspectives. One of the main objectives in this thesis is to provide Deloitte with a frame of solutions for them to establish clear rules, policies and norms that encourage...

  1. Recovering valuable metals from recycled photovoltaic modules.

    Science.gov (United States)

    Yi, Youn Kyu; Kim, Hyun Soo; Tran, Tam; Hong, Sung Kil; Kim, Myong Jun

    2014-07-01

    Recovering valuable metals such as Si, Ag, Cu, and Al has become a pressing issue as end-of-life photovoltaic modules need to be recycled in the near future to meet legislative requirements in most countries. Of major interest is the recovery and recycling of high-purity silicon (> 99.9%) for the production of wafers and semiconductors. The value of Si in crystalline-type photovoltaic modules is estimated to be -$95/kW at the 2012 metal price. At the current installed capacity of 30 GW/yr, the metal value in the PV modules represents valuable resources that should be recovered in the future. The recycling of end-of-life photovoltaic modules would supply > 88,000 and 207,000 tpa Si by 2040 and 2050, respectively. This represents more than 50% of the required Si for module fabrication. Experimental testwork on crystalline Si modules could recover a > 99.98%-grade Si product by HNO3/NaOH leaching to remove Al, Ag, and Ti and other metal ions from the doped Si. A further pyrometallurgical smelting at 1520 degrees C using CaO-CaF2-SiO2 slag mixture to scavenge the residual metals after acid leaching could finally produce > 99.998%-grade Si. A process based on HNO3/NaOH leaching and subsequent smelting is proposed for recycling Si from rejected or recycled photovoltaic modules. Implications: The photovoltaic industry is considering options of recycling PV modules to recover metals such as Si, Ag, Cu, Al, and others used in the manufacturing of the PV cells. This is to retain its "green" image and to comply with current legislations in several countries. An evaluation of potential resources made available from PV wastes and the technologies used for processing these materials is therefore of significant importance to the industry. Of interest are the costs of processing and the potential revenues gained from recycling, which should determine the viability of economic recycling of PV modules in the future.

  2. Recyclability assessment of nano-reinforced plastic packaging.

    Science.gov (United States)

    Sánchez, C; Hortal, M; Aliaga, C; Devis, A; Cloquell-Ballester, V A

    2014-12-01

    Packaging is expected to become the leading application for nano-composites by 2020 due to the great advantages on mechanical and active properties achieved with these substances. As novel materials, and although there are some current applications in the market, there is still unknown areas under development. One key issue to be addressed is to know more about the implications of the nano-composite packaging materials once they become waste. The present study evaluates the extrusion process of four nanomaterials (Layered silicate modified nanoclay (Nanoclay1), Calcium Carbonate (CaCO3), Silver (Ag) and Zinc Oxide (ZnO) as part of different virgin polymer matrices of polyethylene (PE), Polypropylene (PP) and Polyethyleneterephtalate (PET). Thus, the following film plastic materials: (PE-Nanoclay1, PE-CaCO3, PP-Ag, PET-ZnO, PET-Ag, PET-Nanoclay1) have been processed considering different recycling scenarios. Results on recyclability show that for PE and PP, in general terms and except for some minor variations in yellowness index, tensile modulus, tensile strength and tear strength (PE with Nanoclay1, PP with Ag), the introduction of nanomaterial in the recycling streams for plastic films does not affect the final recycled plastic material in terms of mechanical properties and material quality compared to conventional recycled plastic. Regarding PET, results show that the increasing addition of nanomaterial into the recycled PET matrix (especially PET-Ag) could influence important properties of the recycled material, due to a slight degradation of the polymer, such as increasing pinholes, degradation fumes and elongation at break. Moreover, it should be noted that colour deviations were visible in most of the samples (PE, PP and PET) in levels higher than 0.3 units (limit perceivable by the human eye). The acceptance of these changes in the properties of recycled PE, PP and PET will depend on the specific applications considered (e.g. packaging applications are more

  3. Major issues associated with DOE commercial recycling initiatives

    International Nuclear Information System (INIS)

    Motl, G.P.; Burns, D.D.; Rast, D.M.

    1994-01-01

    Major initiatives are underway within DOE to recycle large volumes of scrap material generated during cleanup of the DOE Weapons Complex. These recycling initiatives are driven not only by the desire to conserve natural resources, but also by the recognition that shallow level burial is not a politically acceptable option. The Fernald facility is in the vanguard of a number of major DOE recycling efforts. These early efforts have brought issues to light that can have a major impact on the ability of Fernald and other major DOE sites to expand recycling efforts in the future. Some of these issues are; secondary waste deposition, title to material and radioactive contaminants, mixed waste generated during recycling, special nuclear material possession limits, cost benefit, transportation of waste to processing facilities, release criteria, and uses for beneficially reused products

  4. Self-care in individuals who recycle garbage (recyclers of Medellín, Colombia, 2005

    Directory of Open Access Journals (Sweden)

    Yolanda L. López A

    2009-08-01

    Full Text Available Objective: to understand the conceptions, attitudes and practices about self-care among informal recyclers in Medellín. Methodology: a qualitative study from the perspective of recyclers not belonging to any guild in Medellín in 2005 was developed. A total amount of 52 interviews with previous informed consent were applied, plus non-participant observation and field diary. Results: self-care is understood as the constant protection of the body in order to avoid the occurrence of diseases. It includes aspects of hygiene, diet, medical consultation, proper use of leisure time and utilization of instruments for personal protection, such as gloves, face masks, caps, and ear plugs among other devices. Discussion: disease prevention goes beyond biological aspects and becomes part of a social dimension for people in which the most important features are the consequences for themselves, their labor team and their families. Recyclers have knowledge on prevention and practices that promote health and well-being, but the latter are not applied because they diminish their job performance, or they do not consider them to be necessary, do not feel like executing them nor they lack the economic resources to assume them. Autocare practices of recyclers are mainly supported by the primacy of the team history than by the scientific knowledge concerning it.

  5. Relationship between the Compressive and Tensile Strength of Recycled Concrete

    International Nuclear Information System (INIS)

    El Dalati, R.; Haddad, S.; Matar, P.; Chehade, F.H

    2011-01-01

    Concrete recycling consists of crushing the concrete provided by demolishing the old constructions, and of using the resulted small pieces as aggregates in the new concrete compositions. The resulted aggregates are called recycled aggregates and the new mix of concrete containing a percentage of recycled aggregates is called recycled concrete. Our previous researches have indicated the optimal percentages of recycled aggregates to be used for different cases of recycled concrete related to the original aggregates nature. All results have shown that the concrete compressive strength is significantly reduced when using recycled aggregates. In order to obtain realistic values of compressive strength, some tests have been carried out by adding water-reducer plasticizer and a specified additional quantity of cement. The results have shown that for a limited range of plasticizer percentage, and a fixed value of additional cement, the compressive strength has reached reasonable value. This paper treats of the effect of using recycled aggregates on the tensile strength of concrete, where concrete results from the special composition defined by our previous work. The aim is to determine the relationship between the compressive and tensile strength of recycled concrete. (author)

  6. Fish extinctions alter nutrient recycling in tropical freshwaters.

    Science.gov (United States)

    McIntyre, Peter B; Jones, Laura E; Flecker, Alexander S; Vanni, Michael J

    2007-03-13

    There is increasing evidence that species extinctions jeopardize the functioning of ecosystems. Overfishing and other human influences are reducing the diversity and abundance of fish worldwide, but the ecosystem-level consequences of these changes have not been assessed quantitatively. Recycling of nutrients is one important ecosystem process that is directly influenced by fish. Fish species vary widely in the rates at which they excrete nitrogen and phosphorus; thus, altering fish communities could affect nutrient recycling. Here, we use extensive field data on nutrient recycling rates and population sizes of fish species in a Neotropical river and Lake Tanganyika, Africa, to evaluate the effects of simulated extinctions on nutrient recycling. In both of these species-rich ecosystems, recycling was dominated by relatively few species, but contributions of individual species differed between nitrogen and phosphorus. Alternative extinction scenarios produced widely divergent patterns. Loss of the species targeted by fishermen led to faster declines in nutrient recycling than extinctions in order of rarity, body size, or trophic position. However, when surviving species were allowed to increase after extinctions, these compensatory responses had strong moderating effects even after losing many species. Our results underscore the complexity of predicting the consequences of extinctions from species-rich animal communities. Nevertheless, the importance of exploited species in nutrient recycling suggests that overfishing could have particularly detrimental effects on ecosystem functioning.

  7. Childhood Lead Exposure from Battery Recycling in Vietnam

    Directory of Open Access Journals (Sweden)

    William E. Daniell

    2015-01-01

    Full Text Available Background. Battery recycling facilities in developing countries can cause community lead exposure. Objective. To evaluate child lead exposure in a Vietnam battery recycling craft village after efforts to shift home-based recycling outside the village. Methods. This cross-sectional study evaluated 109 children in Dong Mai village, using blood lead level (BLL measurement, parent interview, and household observation. Blood samples were analyzed with a LeadCare II field instrument; highest BLLs (≥45 μg/dL were retested by laboratory analysis. Surface and soil lead were measured at 11 households and a school with X-ray fluorescence analyzer. Results. All children had high BLLs; 28% had BLL ≥45 μg/dL. Younger age, family recycling, and outside brick surfaces were associated with higher BLL. Surface and soil lead levels were high at all tested homes, even with no recycling history. Laboratory BLLs were lower than LeadCare BLLs, in 24 retested children. Discussion. In spite of improvements, lead exposure was still substantial and probably associated with continued home-based recycling, legacy contamination, and workplace take-home exposure pathways. There is a need for effective strategies to manage lead exposure from battery recycling in craft villages. These reported BLL values should be interpreted cautiously, although the observed field-laboratory discordance may reflect bias in laboratory results.

  8. UREP: gateway to uranium recycling

    International Nuclear Information System (INIS)

    Rougeau, J.P.; Durret, L.F.

    1988-01-01

    The industrial experience accumulated in France on recycling makes their conversion service fully reliable technically and economically. Problems associated with chemical and radiochemical behavior have been solved satisfactorily in order to offer customers flexible options for their personal optimization. Economically, a price reduction by a significant factor (up to two) has been proposed by UREP as a firm commitment for the coming years. This is the result of technical experience coupled with favorable scaling effect for the large conversion plant proposed. It is believed that such a positive approach greatly helps customers in managing recycling of their material and generating savings in their fuel cycle economics. This flow of recycled uranium, on top of the 40000 t of natural uranium consumed each year, is a valuable asset available to those utilities which have selected the reprocessing route. 2 figs

  9. Consumer recycling: An ethical decision-making process

    DEFF Research Database (Denmark)

    Culiberg, Barbara; Bajde, Domen

    2013-01-01

    Although recycling is often experienced as a moral dilemma, studies that systematically approach this issue from an ethical perspective are scarce. Moreover, previous studies have explored recycling by mainly using single ethical constructs, such as moral norms, values or obligations, rarely...... approaching it as an ethical decision-making process. Our study takes a more holistic approach and integrates the recycling literature with business ethics theory in order to develop a conceptual model of ethical decision making involved in recycling. The model is based on Jones' issue-contingent model...... using structural equation modelling. The results of our study confirmed the relationships between three key facets of ethical decision making: moral recognition, moral judgment and moral intention. Higher levels of moral recognition were found to lead to more positive moral judgments, which in turn...

  10. Hope and persuasion by physicians during informed consent.

    Science.gov (United States)

    Miller, Victoria A; Cousino, Melissa; Leek, Angela C; Kodish, Eric D

    2014-10-10

    To describe hopeful and persuasive messages communicated by physicians during informed consent for phase I trials and examine whether such communication is associated with physician and parent ratings of the likelihood of benefit, physician and parent ratings of the strength of the physician's recommendation to enroll, parent ratings of control, and parent ratings of perceived pressure. Participants were children with cancer (n = 85) who were offered a phase I trial along with their parents and physicians. Informed consent conferences (ICCs) were audiotaped and coded for physician communication of hope and persuasion. Parents completed an interview (n = 60), and physicians completed a case-specific questionnaire. The most frequent hopeful statements related to expectations of positive outcomes and provision of options. Physicians failed to mention no treatment and/or palliative care as options in 68% of ICCs and that the disease was incurable in 85% of ICCs. When physicians mentioned no treatment and/or palliative care as options, both physicians and parents rated the physician's strength of recommendation to enroll in the trial lower. Hopes and goals other than cure or longer life were infrequently mentioned, and a minority of physicians communicated that the disease was incurable and that no treatment and/or palliative care were options. These findings are of concern, given the low likelihood of medical benefit from phase I trials. Physicians have an important role to play in helping families develop alternative goals when no curative options remain. © 2014 by American Society of Clinical Oncology.

  11. Aspects Concerning the Use of Recycled Concrete Aggregates

    Science.gov (United States)

    Robu, I.; Mazilu, C.; Deju, R.

    2016-11-01

    Natural aggregates (gravel and crushed) are essential non-renewable resources which are used for infrastructure works and civil engineering. Using recycled concrete aggregates (RCA) is a matter of high priority in the construction industry worldwide. This paper presents a study on the use of recycled aggregates, from a concrete of specified class, to acquire new cement concrete with different percentages of recycled aggregates.

  12. Validation of a Portuguese Version of the Children's Hope Scale

    Science.gov (United States)

    Marques, Susana C.; Pais-Ribeiro, J. L.; Lopez, Shane J.

    2009-01-01

    The article describes the development of the Portuguese version of the Children's Hope Scale and the examination of its psychometric properties. A sample of 367 Portuguese students completed the Portuguese-language versions of the Children's Hope Scale (CHS; Snyder et al., 1997), Students' Life Satisfaction Scale (SLSS; Huebner, 1991), Global…

  13. 33 CFR 110.179 - Skidaway River, Isle of Hope, Ga.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Skidaway River, Isle of Hope, Ga. 110.179 Section 110.179 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY ANCHORAGES ANCHORAGE REGULATIONS Anchorage Grounds § 110.179 Skidaway River, Isle of Hope, Ga. (a) The...

  14. Resilience and hope during advanced disease: a pilot study with metastatic colorectal cancer patients.

    Science.gov (United States)

    Solano, Joao Paulo Consentino; da Silva, Amanda Gomes; Soares, Ivan Agurtov; Ashmawi, Hazem Adel; Vieira, Joaquim Edson

    2016-08-02

    The balance between hope-hopelessness plays an important role in the way terminally ill patients report quality of life, and personal resilience may be related to hope at the end of life. The objective of this study was to explore associations between personal resilience, hope, and other possible predictors of hope in advanced cancer patients. A cross-sectional pilot study was carried out with metastatic colorectal cancer patients in a tertiary hospital. The patients answered the Connor-Davidson Resilience Scale, Herth Hope Index, Barthel Index, an instrument addressing family and social support, visual-numeric scales for pain and suffering, a two-item screening for depression, socio-demographic and socio-economic information about the family. Forty-four patients were interviewed (mean age 56 years; range 29-86). A strong correlation was noted between resilience and hope (0.63; p hope and independence for activities of daily living, support from family and community, and pain and suffering levels. Of the 44 patients, 20 presented with depressive symptoms. These depressive patients had lower resilience (p = 0.005) and hope (p = 0.003), and higher scores of suffering (p hope kept stable after adjusting for age, gender, and presence of depression (p hope, resilience-fostering interventions should be most valued in palliative care settings and should be commenced as soon as possible with cancer patients. Patients with advanced stages of non-malignant conditions would also probably benefit from such interventions.

  15. Mass lead intoxication from informal used lead-acid battery recycling in dakar, senegal.

    Science.gov (United States)

    Haefliger, Pascal; Mathieu-Nolf, Monique; Lociciro, Stephanie; Ndiaye, Cheikh; Coly, Malang; Diouf, Amadou; Faye, Absa Lam; Sow, Aminata; Tempowski, Joanna; Pronczuk, Jenny; Filipe Junior, Antonio Pedro; Bertollini, Roberto; Neira, Maria

    2009-10-01

    Between November 2007 and March 2008, 18 children died from a rapidly progressive central nervous system disease of unexplained origin in a community involved in the recycling of used lead-acid batteries (ULAB) in the suburbs of Dakar, Senegal. We investigated the cause of these deaths. Because autopsies were not possible, the investigation centered on clinical and laboratory assessments performed on 32 siblings of deceased children and 23 mothers and on 18 children and 8 adults living in the same area, complemented by environmental health investigations. All 81 individuals investigated were poisoned with lead, some of them severely. The blood lead level of the 50 children tested ranged from 39.8 to 613.9 microg/dL with a mean of 129.5 microg/dL. Seventeen children showed severe neurologic features of toxicity. Homes and soil in surrounding areas were heavily contaminated with lead (indoors, up to 14,000 mg/kg; outdoors, up to 302,000 mg/kg) as a result of informal ULAB recycling. Our investigations revealed a mass lead intoxication that occurred through inhalation and ingestion of soil and dust heavily contaminated with lead as a result of informal and unsafe ULAB recycling. Circumstantial evidence suggested that most or all of the 18 deaths were due to encephalopathy resulting from severe lead intoxication. Findings also suggest that most habitants of the contaminated area, estimated at 950, are also likely to be poisoned. This highlights the severe health risks posed by informal ULAB recycling, in particular in developing countries, and emphasizes the need to strengthen national and international efforts to address this global public health problem.

  16. Virgin and recycled engine oil differentiation: a spectroscopic study.

    Science.gov (United States)

    Al-Ghouti, Mohammad A; Al-Atoum, Lina

    2009-01-01

    As a result of the changes that occur during their use, used engine oils tend to differ in chemical and physical composition from a virgin oil. In general recycled oils have: much higher water and sediment levels than virgin oil; relatively higher concentrations of organic compounds (oxidation products); and relatively higher levels of metals such as Fe, Cd, Cr, Pb, etc. Therefore, the aim of this work was to investigate, assess and to observe, by means of the physical and the chemical properties of the oils, atomic absorption (AA), inductive couple plasma (ICP) and Fourier transform infrared (FTIR) analyses the extent of the differences occurring between the virgin and recycled oil. In important part of this work was also the development of analytical techniques based on the use of FTIR spectroscopy; in relation to the rapid analysis of lubricants; in particular for the differentiation of virgin and recycled oil. The results obtained were expected to be useful for differentiation purposes, providing information on whether the metal concentrations and oxidation products could be an appropriate feature for differentiating a particular oil sample from the others. This work is categorized into a two-step procedure. Firstly, an evaluation of a typical FTIR spectrum of an engine oil sample (mono- and multigrade) is presented. The broad feature centered at 1716 cm(-1) is due to the presence of carbonyl containing degradation products of oil. A band observed at 1732, 1169, 1154 and 1270 cm(-1) assigned to the polymethacrylate stretching vibrations, allows the determination of viscosity modifier and pour point depressant additives. The observed differences in the specific spectral bands (1732, 1169, 1154 and 1270 and 1716 cm(-1)) are investigated and discussed. Secondly, an analytical technique for the measurement of the levels of the wear metals is also applied.

  17. Feasibility of Target Material Recycling as Waste Management Alternative

    International Nuclear Information System (INIS)

    El-Guebaly, L.; Wilson, P.; Henderson, D.; Varuttamaseni, A.

    2004-01-01

    The issue of waste management has been studied simultaneously along with the development of the ARIES heavy-ion-driven inertial fusion energy (IFE) concept. Options for waste management include disposal in repositories, recycling, or clearance from regulatory control, following a reasonable cooling period. This paper concerns the feasibility of recycling the heavy-ion-beam targets, in particular the hohlraum wall materials that include, for example, Au/Gd, Au, W, Pb, Hg, Ta, Pb/Ta/Cs, Hg/W/Cs, Pb/Hf, Hf, solid Kr, and solid Xe. The choice between target material disposal and recycling depends on the amount of waste generated relative to the nuclear island, the strategy to solve the recycling problem, and the impact of the additional cost and complexity of the recycling process on the overall machine. A detailed flow diagram for the elements of the recycling process was developed to analyze two extreme activation cases: (a) one-shot use and then disposal in a repository and (b) recycling continuously during plant life without removal of transmutation products. Metrics for comparing the two scenarios included waste level, dose to recycling equipment, additional cost, and design complexity. Comparing the two approaches indicated a preference for the one-shot scenario as it generates 1 m 3 /yr of extremely low-level waste (Class A) and offers attractive design and economics features. Recycling reduces the target waste stream by a factor of 10 or more but introduces additional issues. It may produce high-level waste, requires remote handling, adds radioactive storage facilities, and increases the cost and complexity of the plant. The inventory analysis indicated that the heavy-ion-beam (HIB) target materials represent a very small waste stream compared to that of the nuclear island (<1% of the total waste). This means recycling is not a 'must' requirement for IFE-HIB power plants unless the target materials have cost and/or resource problems (e.g., Au and Gd). In this

  18. Effect of Aqueous Phase Recycling in Continuous Hydrothermal Liquefaction

    DEFF Research Database (Denmark)

    Klemmer, Maika; Madsen, René Bjerregaard; Houlberg, Kasper

    2016-01-01

    was observed with a maximum increase in the first recycle experiment. However, the recycling of the aqueous phase also resulted in lower heating values and higher water contents in the oil fraction. Based on these findings, recycling the aqueous phase is a trade-off between improved yields and reduced burn...... qualities of the biocrude. That said, recycling also lowers carbon discharge to the aqueous fraction, which may contribute significantly to reducing the environmental footprint of an industrial HTL plant....

  19. An investigation of TRU recycling with various neutron spectrums

    International Nuclear Information System (INIS)

    Yong-Nam, Kim; Hong-Chul, Kim; Chi-Young, Han; Jong-Kyung, Kim; Won-Seok Park

    2003-01-01

    This study is intended to evaluate the dependency of TRU recycling characteristics on the neutron spectrum shift in a Pb-Bi cooled core. Considering two Pb-Bi cooled cores with the soft and the hard spectrum, respectively, various characteristics of the recycled core are carefully examined and compared with each other. Assuming very simplified fuel cycle management with the homogeneous and single batch fuel loading, the burn-up calculations are performed until the recycled core reached to the (quasi-) equilibrium state. The mechanism of TRU recycling toward the equilibrium is analysed in terms of burn-up reactivity and the isotopic compositions of TRU fuel. In the comparative analyses, the difference in the recycling behaviour between the two cores is clarified. In addition, the basic safety characteristics of the recycled core are also discussed in terms of the Doppler coefficient, the coolant loss reactivity coefficient, and the effective delayed neutron fraction. (author)

  20. Sustainable recycling technologies for Solar PV off-grid system

    Directory of Open Access Journals (Sweden)

    Uppal Bhavesh

    2017-01-01

    Full Text Available Policy makers throughout the world have accepted climate change as a repercussion of fossil fuel exploitation. This has led the governments to integrate renewable energy streams in their national energy mix. PV off-grid Systems have been at the forefront of this transition because of their permanently increasing efficiency and cost effectiveness. These systems are expected to produce large amount of different waste streams at the end of their lifetime. It is important that these waste streams should be recycled because of the lack of available resources. Our study found that separate researches have been carried out to increase the efficiencies of recycling of individual PV system components but there is a lack of a comprehensive methodical research which details efficient and sustainable recycling processes for the entire PV off-grid system. This paper reviews the current and future recycling technologies for PV off-grid systems and presents a scheme of the most sustainable recycling technologies which have the potential for adoption. Full Recovery End-of-Life Photovoltaic (FRELP recycling technology can offer opportunities to sustainably recycle crystalline silicon PV modules. Electro-hydrometallurgical process & Vacuum technologies can be used for recovering lead from lead acid batteries with a high recovery rate. The metals in the WEEE can be recycled by using a combination of biometallurgical technology, vacuum metallurgical technology and other advanced metallurgical technologies (utrasonical, mechano-chemical technology while the plastic components can be effectively recycled without separation by using compatibilizers. All these advanced technologies when used in combination with each other provide sustainable recycling options for growing PV off-grid systems waste. These promising technologies still need further improvement and require proper integration techniques before implementation.

  1. Strategies for plutonium recycle in a system of pressurized water reactors

    International Nuclear Information System (INIS)

    Leaver, D.E.W.

    1976-01-01

    A methodology is developed to allow a utility fuel manager to determine economic strategies for recycling plutonium in a system of light water reactors. One possible plutonium recycle strategy would be self-generated recycle, in which plutonium discharged from a reactor is recycled back to that same reactor as soon as possible. Another possible strategy is to recycle all the plutonium discharged from several reactors into one reactor. Such a strategy might be advantageous if the reactor receiving the plutonium were of a type that utilized plutonium more effectively than other reactors in the system. There are several considerations which affect the economics of recycling a batch of plutonium to one reactor or cycle vs. another, or which would favor a special recycling strategy. Among these are cycle energy, length of time that plutonium is stored prior to recycle, and isotopes of the plutonium. The methodology developed is used to quantitatively illustrate the effect on recycle strategy of these parameters. The problem of choosing the plutonium recycle strategy which results in the minimum fuel cost is formulated as a mathematical programming problem. The objective function for this problem is the total discounted fuel cost for the reactor system over a specified planning period. The savings of an optimal recycle strategy over self-generated recycle would be typically one million dollars per year for a utility with several large PWRs

  2. Sustainability and the Recycling of Words

    Science.gov (United States)

    Miller, Donna L.; Nilsen, Alleen Pace

    2011-01-01

    With the mention of "sustainability" and "recycling," most people think about reusing paper, plastic, metal, and glass, but what the authors discovered when they embarked on a word-study unit is that the sustainability movement has also brought about the recycling of words. The authors were team-teaching a language awareness class taken by…

  3. Celebrating the Life and Legacy of Dr. John Hope Franklin

    Science.gov (United States)

    Harris, Robert L., Jr.; Levering-Lewis, David; French, John D.; Wharton, Clifton R., Jr.

    2009-01-01

    Dr. John Hope Franklin chronicled the experiences of African-Americans like no one before him, forcing America to recognize Black history as American history. His contributions were innumerable and his impact was abiding. In celebration of his life and legacy, the authors profile the celebrated scholar and activist, Dr. John Hope Franklin.

  4. Relations among School Connectedness, Hope, Life Satisfaction, and Bully Victimization

    Science.gov (United States)

    You, Sukkyung; Furlong, Michael J.; Felix, Erika; Sharkey, Jill D.; Tanigawa, Diane; Green, Jennifer Greif

    2008-01-01

    This study investigates the role of school connectedness in mediating the relation between students' sense of hope and life satisfaction for three groups: Bullied Victims, Peer Victims, and Nonvictims. Students in grades 5 to 12 (N = 866) completed the California Bully/Victim Scale, School Connectedness Scale, Children's Hope Scale, and Students'…

  5. Solid waste characterization and recycling potential for a university campus

    International Nuclear Information System (INIS)

    Armijo de Vega, Carolina; Ojeda Benitez, Sara; Ramirez Barreto, Ma. Elizabeth

    2008-01-01

    Integrated waste management systems are one of the greatest challenges for sustainable development. For these systems to be successful, the first step is to carry out waste characterization studies. In this paper are reported the results of a waste characterization study performed in the Campus Mexicali I of the Autonomous University of Baja California (UABC). The aim of this study was to set the basis for implementation of a recovery, reduction and recycling waste management program at the campus. It was found that the campus Mexicali I produces 1 ton of solid wastes per day; more than 65% of these wastes are recyclable or potentially recyclable. These results showed that a program for segregation and recycling is feasible on a University Campus. The study also showed that the local market for recyclable waste, under present conditions - number of recycling companies and amounts of recyclables accepted - can absorb all of these wastes. Some alternatives for the potentially recyclables wastes are discussed. Finally some strategies that could be used to reduce waste at the source are discussed as well

  6. HOPE information system review

    Science.gov (United States)

    Suzuki, Yoshiaki; Nishiyama, Kenji; Ono, Shuuji; Fukuda, Kouin

    1992-08-01

    An overview of the review conducted on H-2 Orbiting Plane (HOPE) is presented. A prototype model was constructed by inputting various technical information proposed by related laboratories. Especially operation flow which enables understanding of correlation between various analysis items, judgement criteria, technical data, and interfaces with others was constructed. Technical information data base and retrieval systems were studied. A Macintosh personal computer was selected for information shaping because of its excellent function, performance, operability, and software completeness.

  7. Entropy, recycling and macroeconomics of water resources

    Science.gov (United States)

    Karakatsanis, Georgios; Mamassis, Nikos; Koutsoyiannis, Demetris

    2014-05-01

    We propose a macroeconomic model for water quantity and quality supply multipliers derived by water recycling (Karakatsanis et al. 2013). Macroeconomic models that incorporate natural resource conservation have become increasingly important (European Commission et al. 2012). In addition, as an estimated 80% of globally used freshwater is not reused (United Nations 2012), under increasing population trends, water recycling becomes a solution of high priority. Recycling of water resources creates two major conservation effects: (1) conservation of water in reservoirs and aquifers and (2) conservation of ecosystem carrying capacity due to wastewater flux reduction. Statistical distribution properties of the recycling efficiencies -on both water quantity and quality- for each sector are of vital economic importance. Uncertainty and complexity of water reuse in sectors are statistically quantified by entropy. High entropy of recycling efficiency values signifies greater efficiency dispersion; which -in turn- may indicate the need for additional infrastructure for the statistical distribution's both shifting and concentration towards higher efficiencies that lead to higher supply multipliers. Keywords: Entropy, water recycling, water supply multipliers, conservation, recycling efficiencies, macroeconomics References 1. European Commission (EC), Food and Agriculture Organization (FAO), International Monetary Fund (IMF), Organization of Economic Cooperation and Development (OECD), United Nations (UN) and World Bank (2012), System of Environmental and Economic Accounting (SEEA) Central Framework (White cover publication), United Nations Statistics Division 2. Karakatsanis, G., N. Mamassis, D. Koutsoyiannis and A. Efstratiades (2013), Entropy and reliability of water use via a statistical approach of scarcity, 5th EGU Leonardo Conference - Hydrofractals 2013 - STAHY '13, Kos Island, Greece, European Geosciences Union, International Association of Hydrological Sciences

  8. Recycled Coarse Aggregate Produced by Pulsed Discharge in Water

    Science.gov (United States)

    Namihira, Takao; Shigeishi, Mitsuhiro; Nakashima, Kazuyuki; Murakami, Akira; Kuroki, Kaori; Kiyan, Tsuyoshi; Tomoda, Yuichi; Sakugawa, Takashi; Katsuki, Sunao; Akiyama, Hidenori; Ohtsu, Masayasu

    In Japan, the recycling ratio of concrete scraps has been kept over 98 % after the Law for the Recycling of Construction Materials was enforced in 2000. In the present, most of concrete scraps were recycled as the Lower Subbase Course Material. On the other hand, it is predicted to be difficult to keep this higher recycling ratio in the near future because concrete scraps increase rapidly and would reach to over 3 times of present situation in 2010. In addition, the demand of concrete scraps as the Lower Subbase Course Material has been decreased. Therefore, new way to reuse concrete scraps must be developed. Concrete scraps normally consist of 70 % of coarse aggregate, 19 % of water and 11 % of cement. To obtain the higher recycling ratio, the higher recycling ratio of coarse aggregate is desired. In this paper, a new method for recycling coarse aggregate from concrete scraps has been developed and demonstrated. The system includes a Marx generator and a point to hemisphere mesh electrode immersed in water. In the demonstration, the test piece of concrete scrap was located between the electrodes and was treated by the pulsed discharge. After discharge treatment of test piece, the recycling coarse aggregates were evaluated under JIS and TS and had enough quality for utilization as the coarse aggregate.

  9. Hope and mood changes throughout the primary brain tumor illness trajectory.

    Science.gov (United States)

    Acquaye, Alvina A; Lin, Lin; Vera-Bolanos, Elizabeth; Gilbert, Mark R; Armstrong, Terri S

    2016-01-01

    The ambiguity of defining hope impacts the level of readiness faced by health care professionals treating patients with glioma, a disease with unpredictable outcomes. This study describes the report of hope and the relationship between hope and mood in adult brain tumor patients at various points in the illness trajectory. This was a cross-sectional study with data collection including use of the Herth Hope Index (HHI), the Profile of Mood States-Short Form (POMS-SF), and clinical information. Descriptive statistics were used to report sample characteristics. Spearman's rho and Mann-Whitney tests were used to compare and differentiate scores. Eighty-two patients ranging in age from 22 to 78 years (median, 44.5 y) participated in the study. Patients were primarily male (57.3%), married (76.8%), and had a high-grade glioma (35.4%). Nearly half had recurrence, and more than 20% were on active treatment. The overall HHI total score for the sample was 41.32 (range: 13-48). Patients with recurrence had a lower HHI interconnectedness (median = 14.00) score and higher total mood disturbance (median = 14.00) compared with patients without recurrence (median = 15.00 and median = 0.00, respectively; P hope also reported less overall mood disturbance As expected, patients with tumor recurrence reported lower hope and higher mood disturbance than those who were newly diagnosed or without recurrence. Targeting interventions specifically tailored to an individual's needs for improvement in quality of life throughout the disease course may include measures to address hope in order to facilitate positive coping strategies. © The Author(s) 2015. Published by Oxford University Press on behalf of the Society for Neuro-Oncology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  10. 78 FR 64048 - Noise Exposure Map Notice for Bob Hope Airport, Burbank, California

    Science.gov (United States)

    2013-10-25

    ... Hope Airport, Burbank, California AGENCY: Federal Aviation Administration, (FAA), DOT. ACTION: Notice...-Pasadena Airport Authority, for Bob Hope Airport under the provisions of 49 U.S.C. 47501 et. seq (Aviation... announces that the FAA finds that the noise exposure maps submitted for Bob Hope Airport are in compliance...

  11. The effects of recycling loops in food waste management in Japan: based on the environmental and economic evaluation of food recycling.

    Science.gov (United States)

    Takata, Miki; Fukushima, Kazuyo; Kino-Kimata, Noriko; Nagao, Norio; Niwa, Chiaki; Toda, Tatsuki

    2012-08-15

    In Japan, a revised Food Recycling Law went into effect in 2007 to promote a "recycling loop" that requires food industries to purchase farm products that are grown using food waste-derived compost/animal feed. To realize and expand food recycling, it is necessary to evaluate how the recycling facilities work in the recycling loop. The purpose of this study is to assess the environmental and economic efficiency of the food recycling facilities that are involved in the recycling loop, which are also known as looped facilities. The global warming potential and running cost of five looped facilities were evaluated by LCA (life cycle assessment) and LCC (life cycle cost) approaches: machine integrated compost, windrow compost, liquid feed, dry feed, and bio-gasification. The LCA results showed low total GHG (greenhouse gas) emissions of -126 and -49 kg-CO(2)/t-waste, respectively, for dry feed and bio-gasification facilities, due to a high substitution effect. The LCC study showed a low running cost for composting facilities of -15,648 and -18,955 yen/t-waste, respectively, due to high revenue from the food waste collection. It was found that the mandatory reporting of food waste emitters to the government increased collection fees; however, the collection fee in animal feed facilities was relatively low because food waste was collected at a low price or nutritious food waste was purchased to produce quality feed. In the characterisation survey of various treatment methods, the composting facilities showed a relatively low environmental impact and a high economic efficiency. Animal feed facilities had a wide distribution of the total GHG emissions, depending on both the energy usage during the drying process and the substitution effect, which were related to the water content of the food waste and the number of recycled products. In comparison with incineration, the majority of the food recycling facilities showed low GHG emissions and economic effectiveness. This

  12. The effects of recycling loops in food waste management in Japan: Based on the environmental and economic evaluation of food recycling

    International Nuclear Information System (INIS)

    Takata, Miki; Fukushima, Kazuyo; Kino-Kimata, Noriko; Nagao, Norio; Niwa, Chiaki; Toda, Tatsuki

    2012-01-01

    In Japan, a revised Food Recycling Law went into effect in 2007 to promote a “recycling loop” that requires food industries to purchase farm products that are grown using food waste-derived compost/animal feed. To realize and expand food recycling, it is necessary to evaluate how the recycling facilities work in the recycling loop. The purpose of this study is to assess the environmental and economic efficiency of the food recycling facilities that are involved in the recycling loop, which are also known as looped facilities. The global warming potential and running cost of five looped facilities were evaluated by LCA (life cycle assessment) and LCC (life cycle cost) approaches: machine integrated compost, windrow compost, liquid feed, dry feed, and bio-gasification. The LCA results showed low total GHG (greenhouse gas) emissions of − 126 and − 49 kg-CO 2 /t-waste, respectively, for dry feed and bio-gasification facilities, due to a high substitution effect. The LCC study showed a low running cost for composting facilities of − 15,648 and − 18,955 yen/t-waste, respectively, due to high revenue from the food waste collection. It was found that the mandatory reporting of food waste emitters to the government increased collection fees; however, the collection fee in animal feed facilities was relatively low because food waste was collected at a low price or nutritious food waste was purchased to produce quality feed. In the characterisation survey of various treatment methods, the composting facilities showed a relatively low environmental impact and a high economic efficiency. Animal feed facilities had a wide distribution of the total GHG emissions, depending on both the energy usage during the drying process and the substitution effect, which were related to the water content of the food waste and the number of recycled products. In comparison with incineration, the majority of the food recycling facilities showed low GHG emissions and economic

  13. The effects of recycling loops in food waste management in Japan: Based on the environmental and economic evaluation of food recycling

    Energy Technology Data Exchange (ETDEWEB)

    Takata, Miki [Graduate School of Engineering, Soka University, Hachioji, Tokyo 192-8577 (Japan); Fukushima, Kazuyo [Watanabe Oyster Laboratory Co., Ltd, Hachioji, Tokyo 192-0154 (Japan); Kino-Kimata, Noriko [Graduate School of Engineering, Soka University, Hachioji, Tokyo 192-8577 (Japan); Nagao, Norio [Institute of Bioscience, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia); Niwa, Chiaki [Graduate School of Engineering, Soka University, Hachioji, Tokyo 192-8577 (Japan); Toda, Tatsuki, E-mail: toda@soka.ac.jp [Graduate School of Engineering, Soka University, Hachioji, Tokyo 192-8577 (Japan)

    2012-08-15

    In Japan, a revised Food Recycling Law went into effect in 2007 to promote a 'recycling loop' that requires food industries to purchase farm products that are grown using food waste-derived compost/animal feed. To realize and expand food recycling, it is necessary to evaluate how the recycling facilities work in the recycling loop. The purpose of this study is to assess the environmental and economic efficiency of the food recycling facilities that are involved in the recycling loop, which are also known as looped facilities. The global warming potential and running cost of five looped facilities were evaluated by LCA (life cycle assessment) and LCC (life cycle cost) approaches: machine integrated compost, windrow compost, liquid feed, dry feed, and bio-gasification. The LCA results showed low total GHG (greenhouse gas) emissions of - 126 and - 49 kg-CO{sub 2}/t-waste, respectively, for dry feed and bio-gasification facilities, due to a high substitution effect. The LCC study showed a low running cost for composting facilities of - 15,648 and - 18,955 yen/t-waste, respectively, due to high revenue from the food waste collection. It was found that the mandatory reporting of food waste emitters to the government increased collection fees; however, the collection fee in animal feed facilities was relatively low because food waste was collected at a low price or nutritious food waste was purchased to produce quality feed. In the characterisation survey of various treatment methods, the composting facilities showed a relatively low environmental impact and a high economic efficiency. Animal feed facilities had a wide distribution of the total GHG emissions, depending on both the energy usage during the drying process and the substitution effect, which were related to the water content of the food waste and the number of recycled products. In comparison with incineration, the majority of the food recycling facilities showed low GHG emissions and economic

  14. Industry-led program recycles used oil materials

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    The Alberta Used Oil Management Association (AUOMA) is running an industry-led program for recycling used oil filters, containers and used oil. The objective of the program is to help develop an infrastructure that will make recycling simple and convenient for consumers of oil materials. It was estimated that millions of litres of used oil are improperly discarded into the Alberta environment. The program is also aimed at increasing public awareness of the importance of recycling used oil materials, particularly to those consumers who change their own motor oil. By the end of 1997 AUOMA expects to open about 50 recycling centres called EcoCentres. An environmental handling charge (EHC) will be paid to AUOMA by wholesale suppliers on the first sale of oil materials in Alberta. The EHC will be the only funds used to support the program

  15. Irradiation performance of HTGR recycle fissile fuel

    International Nuclear Information System (INIS)

    Homan, F.J.; Long, E.L. Jr.

    1976-08-01

    The irradiation performance of candidate HTGR recycle fissile fuel under accelerated testing conditions is reviewed. Failure modes for coated-particle fuels are described, and the performance of candidate recycle fissile fuels is discussed in terms of these failure modes. The bases on which UO 2 and (Th,U)O 2 were rejected as candidate recycle fissile fuels are outlined, along with the bases on which the weak-acid resin (WAR)-derived fissile fuel was selected as the reference recycle kernel. Comparisons are made relative to the irradiation behavior of WAR-derived fuels of varying stoichiometry and conclusions are drawn about the optimum stoichiometry and the range of acceptable values. Plans for future testing in support of specification development, confirmation of the results of accelerated testing by real-time experiments, and improvement in fuel performance and reliability are described

  16. Radioactive contamination of recycled metals

    International Nuclear Information System (INIS)

    Lubenau, J.O.; Cool, D.A.; Yusko, J.G.

    1996-01-01

    Radioactive sources commingled with metal scrap have become a major problem for the metals recycling industry worldwide. Worldwide there have been 38 confirmed reports of radioactive sources accidentally smelted with recycled metal. In some instances, contaminated metal products were subsequently distributed. The metal mills, their products and byproducts from the metal making process such as slags, crosses and dusts from furnaces can become contaminated. In the U.S., imported ferrous metal products such as reinforcement bars, pipe flanges, table legs and fencing components have been found contaminated with taco. U.S. steel mills have unintentionally smelted radioactive sources on 16 occasions. The resulting cost for decontamination waste disposal and temporary closure of the steel mill is typically USD 10,000,000 and has been as much as USD 23,000,000. Other metal recycling industries that have been affected by this problem include aluminum, copper, zinc, gold, lead and vanadium. (author)

  17. Hot Mix Asphalt Recycling: Practices and Principles

    OpenAIRE

    Mohajeri, M.

    2015-01-01

    Hot mix asphalt recycling has become common practice all over the world since the 1970s because of the crisis in oil prices. In the Netherlands, hot recycling has advanced to such an extent that in most of the mixtures more than 50% of reclaimed asphalt (RA) is allowed. These mixtures with such a high RA content are produced in a batch plant to which a parallel drum is attached. In this drum RA is pre-heated to approximately 130°C. Since 2007 another hot mix recycling techniques became availa...

  18. Economic feasibility of radioactive scrap steel recycling

    International Nuclear Information System (INIS)

    Balhiser, R.; Rosholt, D.; Nichols, F.

    1995-01-01

    The goal of MSE's Radioactive Scrap Steel (RSS) Recycle Program is to develop practical methods for recycling RSS into useful product. This paper provides interim information about ongoing feasibility investigations that are scheduled for completion by September 1995. The project approach, major issues, and cost projections are outlined. Current information indicates that a cost effective RSS Recycling Facility can be designed, built, and in operation by 1999. The RSS team believes that high quality steel plate can be made from RSS at a conversion cost of $1500 per ton or less

  19. Length and time scales of atmospheric moisture recycling

    Directory of Open Access Journals (Sweden)

    R. J. van der Ent

    2011-03-01

    Full Text Available It is difficult to quantify the degree to which terrestrial evaporation supports the occurrence of precipitation within a certain study region (i.e. regional moisture recycling due to the scale- and shape-dependence of regional moisture recycling ratios. In this paper we present a novel approach to quantify the spatial and temporal scale of moisture recycling, independent of the size and shape of the region under study. In contrast to previous studies, which essentially used curve fitting, the scaling laws presented by us follow directly from the process equation. thus allowing a fair comparison between regions and seasons. The calculation is based on ERA-Interim reanalysis data for the period 1999 to 2008. It is shown that in the tropics or in mountainous terrain the length scale of recycling can be as low as 500 to 2000 km. In temperate climates the length scale is typically between 3000 to 5000 km whereas it amounts to more than 7000 km in desert areas. The time scale of recycling ranges from 3 to 20 days, with the exception of deserts, where it is much longer. The most distinct seasonal differences can be observed over the Northern Hemisphere: in winter, moisture recycling is insignificant, whereas in summer it plays a major role in the climate. The length and time scales of atmospheric moisture recycling can be useful metrics to quantify local climatic effects of land use change.

  20. HOUSEHOLD PARTICIPATION IN RECYCLING PROGRAMS: A CASE STUDY FROM MALAYSIA

    Directory of Open Access Journals (Sweden)

    Azilah M Akil

    2015-05-01

    Full Text Available The increase in per capita income and rapid urbanization, have contributed significantly to changes in consumption behaviour leading to increased waste generation.  Waste disposed to landfill sites is fast becoming unfeasible thus requiring a more effective management of waste material involving waste reduction, reuse and recycling. The success of recycling program, however, is largely dependent on household participation activities which are essentially behaviour driven. The recycling performance of Malaysian households is still low as it stands at 5.5% compared to Singapore and Vietnam which are 56% and 22% respectively. This study examines recycling behaviour among households and the influence of socioeconomic, demographic and behavioural characteristics on households’ participation in recycling program in Malaysia.  A sample of 300 randomly selected household were surveyed.  The findings revealed that most of the households (70% claim that they are practicing recycling particularly types of paper and old clothes. The factors of participation in recycling show equal results both for environmental concerns and economic benefits. Those who did not participate in recycling, listed household issues or behaviour, namely lack of time and materials to recycle, inconvenient, lack of space, lack of facilities and information as well as laziness, as barriers. The paper finally highlights the factors which can encourage household to be involved in recycling and give recommendations to the authorities in terms of facilities and infrastructures to facilitate the program.