Technology, recommendation and design: on being a 'paternalistic' philosopher.

Science.gov (United States)

Wong, Pak-Hang

2013-03-01

Philosophers have talked to each other about moral issues concerning technology, but few of them have talked about issues of technology and the good life, and even fewer have talked about technology and the good life with the public in the form of recommendation. In effect, recommendations for various technologies are often left to technologists and gurus. Given the potential benefits of informing the public on their impacts on the good life, however, this is a curious state of affairs. In the present paper, I will examine why philosophers are seemingly reluctant to offer recommendations to the public. While there are many reasons for philosophers to refrain from offering recommendations, I shall focus on a specific normative reason. More specifically, it appears that, according to a particular definition, offering recommendations can be viewed as paternalistic, and therefore is prima facie wrong to do so. I will provide an argument to show that the worry about paternalism is unfounded, because a form of paternalism engendered by technology is inevitable. Given the inevitability of paternalism, I note that philosophers should accept the duty to offer recommendations to the public. I will then briefly turn to design ethics, which has reconceptualised the role of philosophers and, in my mind, fitted well with the inevitability of paternalism. Finally, I shall argue that design ethics has to be supplemented by the practice of recommendation if it is to sustain its objective.

Practical Recommendations for the Preliminary Design Analysis of ...

African Journals Online (AJOL)

Interior-to-exterior shear ratios for equal and unequal bay frames, as well as column inflection points were obtained to serve as practical aids for preliminary analysis/design of fixed-feet multistory sway frames. Equal and unequal bay five story frames were analysed to show the validity of the recommended design ...

Mechanical Design Features of PGSFR NSSS

International Nuclear Information System (INIS)

Park, Chang-Gyu; Koo, Gyeong-Hoi; Cho, Jae-Hun; Kim, Sung-Kyun

2016-01-01

The NSSS(Nuclear Steam Supply System) is composed of PHTS(Primary Heat Transport System), IHTS (Intermediate Heat Transport System), and SGS(Steam Generation System). And, DHRS(Decay Heat Removal System) adopts both the active and passive systems for diversity. The structures including components and piping should be designed to ensure the structural integrity for their design life against mechanical and operational loads. In this study, the mechanical design features for the structures and components that make up PGSFR NSSS are described. The mechanical design features of structures and components for a PGSFR NSSS are described. The structures are being designed to maintain the structural integrity for their design lifetime by considering the high temperature operating condition. The decay heat removal system(DHRS) removes all reactor decay heat in two ways; active type(ADHRS) and passive type(PDHRS). ADHRS consists of DHX, blower, FHX, circulation pump, and expansion tank. But PDHRS consists of DHX, AHX, and expansion tank. FHX is a finned-tube-type sodium-to-air heat exchanger whereas AHX is a helical-type sodium-to-air heat exchanger

Mechanical Design Features of PGSFR NSSS

Energy Technology Data Exchange (ETDEWEB)

Park, Chang-Gyu; Koo, Gyeong-Hoi; Cho, Jae-Hun; Kim, Sung-Kyun [KAERI, Daejeon (Korea, Republic of)

2016-05-15

The NSSS(Nuclear Steam Supply System) is composed of PHTS(Primary Heat Transport System), IHTS (Intermediate Heat Transport System), and SGS(Steam Generation System). And, DHRS(Decay Heat Removal System) adopts both the active and passive systems for diversity. The structures including components and piping should be designed to ensure the structural integrity for their design life against mechanical and operational loads. In this study, the mechanical design features for the structures and components that make up PGSFR NSSS are described. The mechanical design features of structures and components for a PGSFR NSSS are described. The structures are being designed to maintain the structural integrity for their design lifetime by considering the high temperature operating condition. The decay heat removal system(DHRS) removes all reactor decay heat in two ways; active type(ADHRS) and passive type(PDHRS). ADHRS consists of DHX, blower, FHX, circulation pump, and expansion tank. But PDHRS consists of DHX, AHX, and expansion tank. FHX is a finned-tube-type sodium-to-air heat exchanger whereas AHX is a helical-type sodium-to-air heat exchanger.

Improved design features of KSNP+ BOP Fluid System

International Nuclear Information System (INIS)

Park, Heung Gyu; Yoon, Kyung Sup

2002-01-01

KOPEC (Korea Power Engineering Co.) in conjunction with the client KHNP (Korea Hydro and Nuclear Power Co.) has been developing the KSNP + (Improved Korean Standard Nuclear Power Plants) design concept since 1998. The main objective of the KSNP + is to enhance safety and economy of KSNP. The design concepts of the KSNP + will be implemented in Shin-Kori Units 1 and 2 Shin-Wolsung Units 1 and 2. This paper provides on an introduction to the improved design features of the KSNP + BOP fluid system consisting of 45 design improvement items. The design improvement concepts of the BOP fluid system have been developed as follows: optimization of system configuration and capacity, simplification of system, and adoption of advanced design features. Improved design features of the BOP fluid system allow additional benefits due to making a contribution to the optimization of plant arrangement and the reduction of operating costs during the plant life time. In conclusion, design improvement to the BOP fluid system have contributed to the KSNP + design concept being more reliable, safe and economically competitive

Recommendations on the use and design of risk matrices

DEFF Research Database (Denmark)

Duijm, Nijs Jan

2015-01-01

of the risk matrix. The objective of this paper is to explore these weaknesses, and provide recommendations for the use and design of risk matrices. The paper reviews the few relevant publications and adds some observations of its own in order to emphasize existing recommendations and add some suggestions...... of its own. The recommendations cover a range of issues, among them: the relation between coloring the risk matrix and the definition of risk and major hazard aversion; the qualitative, subjective assessment of likelihood and consequence; the scaling of the discrete likelihood and consequence categories...

Application of Recommended Design Practices for Conceptual Nuclear Fusion Space Propulsion Systems

Science.gov (United States)

Williams, Craig H.

2004-01-01

An AIAA Special Project Report was recently produced by AIAA's Nuclear and Future Flight Propulsion Technical Committee and is currently in peer review. The Report provides recommended design practices for conceptual engineering studies of nuclear fusion space propulsion systems. Discussion and recommendations are made on key topics including design reference missions, degree of technological extrapolation and concomitant risk, thoroughness in calculating mass properties (nominal mass properties, weight-growth contingency and propellant margins, and specific impulse), and thoroughness in calculating power generation and usage (power-flow, power contingencies, specific power). The report represents a general consensus of the nuclear fusion space propulsion system conceptual design community and proposes 15 recommendations. This paper expands on the Report by providing specific examples illustrating how to apply each of the recommendations.

Main physics features driving design concept and physics design constraints

International Nuclear Information System (INIS)

Fujisawa, Noboru; Sugihara, Masayoshi; Yamamoto, Shin

1987-07-01

Major physics design philosophies are described, which are essential bases for a plasma design and may have significant impacts on a reactor design concept. Those design philosophies are classified into two groups, physics design drivers and physics design constraints. The design drivers are featured by the fact that a designer is free to choose and the choice may be guided by his opinion, such as ignition, a pulse length, an operation scenario, etc.. The design constraints may follow a physical law, such as plasma confinement, β-limit, density limit, and so on. (author)

Recommendation in Motion: Intelligent Hypertouch Garment Design

Directory of Open Access Journals (Sweden)

Shuang Liang

2013-01-01

Full Text Available Intelligent CAD garment design becomes more and more popular by attracting the attentions from both manufacturers and professional stylists. The existing garment CAD systems and clothing simulation software fail to provide user-friendly interfaces as well as dynamic recommendation during the garment creation process. In this paper, we propose an intelligent hypertouch garment design system, which dynamically predicts the possible solutions along with the intelligent design procedure. User behavioral information and dynamic shape matching are used to learn and predict the desired garment patterns. We also propose a new hypertouch concept of gesture-based interaction for our system. We evaluate our system with a prototype platform. The results show that our system is effective, robust, and easy to use for quick garment design.

Safety design features of the IRIS

International Nuclear Information System (INIS)

2009-01-01

The International Reactor Innovative and Secure (IRIS) is an advanced, integral, light water cooled reactor of medium generating capacity (335 MW(e)), that features an integral reactor vessel containing all the reactor primary system components, including steam generators, coolant pumps, pressurizer and heaters, and control rod drive mechanisms; in addition to the typical core, internals, control rods and neutron reflector. This integral configuration allows for the use of a small, high design pressure, spherical steel containment which results in a significant reduction in the size of the nuclear island. Other IRIS innovations include a simplified passive safety system concept and equipment features that derive from the 'safety-by-design' philosophy. This design approach allows for elimination of certain accident initiators at the design stage, or when outright elimination is not possible, decreases accident consequences and/or their probability of occurrence. Major design characteristics of the IRIS are given. As part of the IRIS pre-application licensing review by the U.S. Nuclear Regulatory Commission (NRC), the IRIS design team has developed a test plan that will provide the necessary data for safety analysis computer model verification, as well as for verifying the manufacturing feasibility, operability, and durability of new component designs

Evaluation of design feature No.20 -- Ground support options

International Nuclear Information System (INIS)

Duan, F.

2000-01-01

Ground support options are primarily evaluated for emplacement drifts while ground support systems for non-emplacement openings such as access mains and ventilation drifts are not evaluated against LADS evaluation criteria in this report. Considerations include functional requirements for ground support, the use of a steel-lined system, and the feasibility of using an unlined ground support system principally with grouted rock bolts for permanent ground support. The feature evaluation also emphasizes the postclosure effects of ground support materials on waste isolation and the preclosure aspects such as durability, maintainability, constructibility, safety, engineering acceptability, and cost. This evaluation is to: (A) Review the existing analyses, reports, and studies regarding this design feature, and compile relevant information on performance characteristics. (B) Develop an appropriate evaluation approach for evaluating ground support options against evaluation criteria provided by the LADS team. (C) Evaluate ground support options not only for their preclosure performance in terms of drift stability, material durability, maintenance, constructibility, and cost, but also for their postclosure performance in terms of chemical effects of ground support materials (i.e., concrete, steel) on waste isolation and radionuclide transport. Specifically, the scope for ground support options evaluation include: (1) all steel-lined drifts (no cementitious materials), (2) unlined drifts with minimum cementitious materials (e.g., grout for rockbolts), and (3) concrete-lined drifts, with the focus on the postclosure acceptability evaluation. In addition, unlined drifts with zero cementitious materials (e.g., use of frictional bolts such as split sets, Swellex bolts) are briefly discussed. (D) Identify candidate ground support systems that have the potential to enhance the repository performance based on the feature evaluation. and (E) Provide conclusions and recommendations

Concept design and alternate arrangements of orbiter mid-deck habitability features

Science.gov (United States)

Church, R. A.; Ciciora, J. A.; Porter, K. L.; Stevenson, G. E.

1976-01-01

The evaluations and recommendations for habitability features in the space shuttle orbiter mid-deck are summarized. The orbiter mission plans, the mid-deck dimensions and baseline arrangements along with crew compliments and typical activities were defined. Female and male anthropometric data based on zero-g operations were also defined. Evaluations of baseline and alternate feasible concepts provided several recommendations which are discussed.

Main engineering features driving design concept and engineering design constraints

International Nuclear Information System (INIS)

Saito, Ryusei; Kobayashi, Takeshi; Yamada, Masao

1987-09-01

Major engineering design philosophies are described, which are essential bases for an engineering design and may have significant impacts on a reactor design concept. Those design philosophies are classified into two groups, engineering design drivers and engineering design constraints. The design drivers are featured by the fact that a designer is free to choose and the choice may be guided by his opinion, such as coil system, a mechanical configuration, a tritium breeding scenario, etc.. The design constraints may follow a natural law or engineering limit, such as material strength, coil current density, and so on. (author)

LMFBR plant design features for sodium spill and fire protection

International Nuclear Information System (INIS)

Palm, R.E.

1982-01-01

Design features have been developed for an LMFBR plant to protect the concrete structures from potential liquid spills and fires and prevent sodium-concrete reactions. The inclusion of these features in the plant design reduces the severity of design basis accident conditions imposed on containment and other critical plant structures. Steel liners are provided in cells containing radioactive sodium systems, and catch pans are located in non-radioactive sodium system cells. The design requirements and descriptions of each of these protective features are presented. The loading conditions, analytical approach and numerical results are also included. Design of concrete cell structures that are subject to high temperature effects from sodium spills is discussed. The structural design considers the influence of high temperature on design properties of concrete and carbon steel materials based on results of a comprehensive test program. The development of these design features and high temperature design considerations for the Clinch River Breeder Reactor Plant (CRBRP) are presented in this paper

Effectiveness of Runoff Control Legislation and Active, Beautiful, Clean (ABC Waters Design Features in Singapore

Directory of Open Access Journals (Sweden)

Xue Ping Goh

2017-08-01

Full Text Available Storm water management in Singapore has always been a challenge due to intense rainfall in a flat, low-lying and urbanised catchment. PUB’s (Singapore’s National Water Agency recent runoff control regulation limits the runoff coefficient to 0.55 for developments larger than or equal to 0.2 ha. The use of Active, Beautiful, Clean (ABC Waters design features are encouraged to attain peak runoff reduction. Hence the paper focuses on (i determining the actual hydrological response regime of Singapore using the relationship between runoff coefficient (C, land use and slope; and (ii investigating the effectiveness of ABC Waters design features in delaying and reducing peak runoff using a modelling approach. Based on a Storm Water Management Model (SWMM model and using elevation, land use and soil data as inputs, the peak C-values were obtained for 50 m × 50 m grid cells. The results show that for the same land use, the one with steeper slope resulted in a higher runoff coefficient. Simulations were carried out in two study areas, Green Walk District and Tengah Subcatchment, where ABC Waters design features (such as porous pavements, green roofs, rain gardens and detention tanks were incorporated to reduce C-values. Results showed that peak C-values can be reduced to less than 0.55 after increasing the green areas and constructing detention facilities. Reduction in peak discharge (22% to 63% and a delay in peak discharge by up to 30 min were also observed. Hence, it is recommended to consider the relationship between slope and land use while determining runoff coefficients; and to incorporate ABC Waters design features in urban design to reduce the peak flow and runoff coefficient (C.

40 CFR 240.205-2 - Recommended procedures: Design.

Science.gov (United States)

2010-07-01

... air pollution control technology. (b) All emissions, including dust from vents, should be controlled. ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Design. 240.205-2 Section 240.205-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID...

Using Mathematical Modeling and Set-Based Design Principles to Recommend an Existing CVL Design

Science.gov (United States)

2017-09-01

MATHEMATICAL MODELING AND SET-BASED DESIGN PRINCIPLES TO RECOMMEND AN EXISTING CVL DESIGN by William H. Ehlies September 2017 Thesis Advisor...Office of Management and Budget, Paperwork Reduction Project (0704-0188) Washington, DC 20503. 1. AGENCY USE ONLY (Leave blank) 2. REPORT DATE...September 2017 3. REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE USING MATHEMATICAL MODELING AND SET-BASED DESIGN PRINCIPLES

Recommending Peers for Learning: Matching on Dissimilarity in Interpretations to Provoke Breakdown

Science.gov (United States)

Rajagopal, Kamakshi; van Bruggen, Jan M.; Sloep, Peter B.

2017-01-01

People recommenders are a widespread feature of social networking sites and educational social learning platforms alike. However, when these systems are used to extend learners' Personal Learning Networks, they often fall short of providing recommendations of learning value to their users. This paper proposes a design of a people recommender based…

HCRS: A hybrid clothes recommender system based on user ratings and product features

OpenAIRE

Hu, Xiaosong; Zhu, Wen; Li, Qing

2014-01-01

Nowadays, online clothes-selling business has become popular and extremely attractive because of its convenience and cheap-and-fine price. Good examples of these successful Web sites include Yintai.com, Vancl.com and Shop.vipshop.com which provide thousands of clothes for online shoppers. The challenge for online shoppers lies on how to find a good product from lots of options. In this article, we propose a collaborative clothes recommender for easy shopping. One of the unique features of thi...

A study of design features of civil works of nuclear installations facilitating their eventual refurbishing, renewal, dismantling or demolition

International Nuclear Information System (INIS)

Paton, A.A.; Benwell, P.; Irwin, T.F.; Hunter, I.

1984-03-01

This report describes a study that has been carried out to identify civil engineering features which could be incorporated in future gas cooled and light water cooled nuclear power plants to facilitate their decommissioning. The report reviews the problems likely to be met in decommissioning present day nuclear power plants and concludes that there is a number of such features which could be introduced in future designs to overcome or eliminate the problems. The report identifies and describes these features and recommends that further work be carried out to confirm their feasibility. The study briefly considered the possibility of refurbishing nuclear plants and concluded that this is not a realistic option in present circumstances. (author)

Engineering features of the INTOR conceptual design

International Nuclear Information System (INIS)

Shannon, T.E.

1981-01-01

The INTOR engineering design has been strongly influenced by considerations for assembly and maintenance. A maintenance philosophy was established at the outset of the conceptual design to insure that the tokamak configuration would be developed to accommodate maintenance requirements. The main features of the INTOR design are summarized in this paper with primary emphasis on the impact of maintenance considerations

Design features of APWR in Japan

International Nuclear Information System (INIS)

Yamaguchi, H.; Aeba, Y.; Weiss, E.H.

1999-01-01

Development of the Advanced Pressurized Water Reactor (APWR) was executed in the Improvement and Standardization Program which was organized by the Ministry of International Trade and Industry, Japanese utilities (Hokkaido, Kansai, Shikoku, Kyushu Electric Power Companies and the Japan Atomic Power Company) and manufacturers (Mitsubishi Heavy Industries and Westinghouse Electric). Improvements in terms of safety, reliability, operability, maintainability and economy have been incorporated based on comprehensive evaluations of both the advanced technologies available today, and the experience associated with construction and operation of current PWR plants. The main design improvement features applied in APWR include a core design that contributes to effective use of uranium resource, safety enhancement in the engineered safeguard system, and reliability enhancement in the reactor internal structures. This paper briefly describes the main features of the APWR design focusing on the following two items: the radial reflector, which enhances reliability of the reactor internal structures as well as neutron economy in the core region; and an advanced accumulator, which enhances Emergency Core Cooling System (ECCS) reliability and contributes to system simplification due to passive low pressure injection function. (author)

Structural health monitoring feature design by genetic programming

International Nuclear Information System (INIS)

Harvey, Dustin Y; Todd, Michael D

2014-01-01

Structural health monitoring (SHM) systems provide real-time damage and performance information for civil, aerospace, and other high-capital or life-safety critical structures. Conventional data processing involves pre-processing and extraction of low-dimensional features from in situ time series measurements. The features are then input to a statistical pattern recognition algorithm to perform the relevant classification or regression task necessary to facilitate decisions by the SHM system. Traditional design of signal processing and feature extraction algorithms can be an expensive and time-consuming process requiring extensive system knowledge and domain expertise. Genetic programming, a heuristic program search method from evolutionary computation, was recently adapted by the authors to perform automated, data-driven design of signal processing and feature extraction algorithms for statistical pattern recognition applications. The proposed method, called Autofead, is particularly suitable to handle the challenges inherent in algorithm design for SHM problems where the manifestation of damage in structural response measurements is often unclear or unknown. Autofead mines a training database of response measurements to discover information-rich features specific to the problem at hand. This study provides experimental validation on three SHM applications including ultrasonic damage detection, bearing damage classification for rotating machinery, and vibration-based structural health monitoring. Performance comparisons with common feature choices for each problem area are provided demonstrating the versatility of Autofead to produce significant algorithm improvements on a wide range of problems. (paper)

Social media mining and visualization for point-of-interest recommendation

Institute of Scientific and Technical Information of China (English)

Ren Xingyi; Song Meina; E Haihong; Song Junde

2017-01-01

With the rapid growth of location-based social networks (LBSNs),point-of-interest (POI) recommendation has become an important research problem.As one of the most representative social media platforms,Twitter provides various real-life information for POI recommendation in real time.Despite that POI recommendation has been actively studied,tweet images have not been well utilized for this research problem.State-of-the-art visual features like convolutional neural network (CNN) features have shown significant performance gains over the traditional bag-of-visual-words in unveiling the image's semantics.Unfortunately,they have not been employed for POI recommendation from social websites.Hence,how to make the most of tweet images to improve the performance of POI recommendation and visualization remains open.In this paper,we thoroughly study the impact of tweet images on POI recommendation for different POI categories using various visual features.A novel topic model called social media Twitter-latent Dirichlet allocation (SM-TwitterLDA) which jointly models five Twitter features,(i.e.,text,image,location,timestamp and hashtag) is designed to discover POIs from the sheer amount of tweets.Moreover,each POI is visualized by representative images selected on three predefined criteria.Extensive experiments have been conducted on a real-life tweet dataset to verify the effectiveness of our method.

Feature-based component model for design of embedded systems

Science.gov (United States)

Zha, Xuan Fang; Sriram, Ram D.

2004-11-01

An embedded system is a hybrid of hardware and software, which combines software's flexibility and hardware real-time performance. Embedded systems can be considered as assemblies of hardware and software components. An Open Embedded System Model (OESM) is currently being developed at NIST to provide a standard representation and exchange protocol for embedded systems and system-level design, simulation, and testing information. This paper proposes an approach to representing an embedded system feature-based model in OESM, i.e., Open Embedded System Feature Model (OESFM), addressing models of embedded system artifacts, embedded system components, embedded system features, and embedded system configuration/assembly. The approach provides an object-oriented UML (Unified Modeling Language) representation for the embedded system feature model and defines an extension to the NIST Core Product Model. The model provides a feature-based component framework allowing the designer to develop a virtual embedded system prototype through assembling virtual components. The framework not only provides a formal precise model of the embedded system prototype but also offers the possibility of designing variation of prototypes whose members are derived by changing certain virtual components with different features. A case study example is discussed to illustrate the embedded system model.

The Design and Implementation of an Intelligent Apparel Recommend Expert System

Directory of Open Access Journals (Sweden)

A. H. Dong

2013-01-01

Full Text Available Now with the rapid development of information science and technology, intelligent apparel recommend has drawn wide attention in apparel retail industry. Intelligent management and effective recommend are two issues of crucial importance for the retail store to enhance its corporate influence and increase its economic benefits. This paper proposes an intelligent recommend system design scheme for apparel retail which is based on expert system. By comprehensive utilization of database management and expert system technology, the proposed system provides a solid solution in improving the customer shopping experience. This paper presents a kind of object-oriented blackboard structure, which is applied in the apparel recommend expert system and establishes expert rule on the basis of apparel characteristic elements. Through the establishment of the rule base, the system generates personal recommend list by positive rule reasoning mechanism engine. The proposed method thus gives dress collocation scheme for the customer through the human-machine interaction from the point of view of the apparel experts. This design scheme avails the customers to experience targeted service with intellectualization, and personalization and it has certain reference significance for promoting apparel retail intelligence development.

Trusted Service Scheduling and Optimization Strategy Design of Service Recommendation

Directory of Open Access Journals (Sweden)

Xiaona Xia

2017-01-01

Full Text Available More and more Web services raise the demands of personalized service recommendation; there exist some recommendation technologies, which improve the qualities of service recommendation by using service ranking and collaborative filtering. However, privacy and security are also important issues in service scheduling process; social relationships have been the key factors of interpersonal communication; service selection based on user preferences has become an inevitable trend. Starting from user demand preferences, this paper analyzes social topology and service demand information and obtains trusted social relationships; then we construct the fusion model of service historical preferences and potential ones; according to social service recommendation demands, TSRSR algorithm has completed designing. Through experiments, TSRSR algorithm is much better than the others, which can effectively improve potential preferences’ learning. Furthermore, the research results of this paper have more significance to study the security and privacy of service recommendation.

Research on E-Commerce Platform-Based Personalized Recommendation Algorithm

Directory of Open Access Journals (Sweden)

Zhijun Zhang

2016-01-01

Full Text Available Aiming at data sparsity and timeliness in traditional E-commerce collaborative filtering recommendation algorithms, when constructing user-item rating matrix, this paper utilizes the feature that commodities in E-commerce system belong to different levels to fill in nonrated items by calculating RF/IRF of the commodity’s corresponding level. In the recommendation prediction stage, considering timeliness of the recommendation system, time weighted based recommendation prediction formula is adopted to design a personalized recommendation model by integrating level filling method and rating time. The experimental results on real dataset verify the feasibility and validity of the algorithm and it owns higher predicting accuracy compared with present recommendation algorithms.

Recommendations for the Design of Serious Games in Neurodegenerative Diseases.

Science.gov (United States)

Ben-Sadoun, Grégory; Manera, Valeria; Alvarez, Julian; Sacco, Guillaume; Robert, Philippe

2018-01-01

The use of Serious Games (SG) in the health domain is expanding. In the field of Neurodegenerative Diseases (ND) such as Alzheimer's Disease, SG are currently employed to provide alternative solutions for patients' treatment, stimulation, and rehabilitation. The design of SG for people with ND implies collaborations between professionals in ND and professionals in SG design. As the field is quite young, professionals specialized in both ND and SG are still rare, and recommendations for the design of SG for people with ND are still missing. This perspective paper aims to provide recommendations in terms of ergonomic choices for the design of SG aiming at stimulating people with ND, starting from the existing SG already tested in this population: "MINWii", "Kitchen and Cooking", and "X-Torp". We propose to rely on nine ergonomic criteria: eight ergonomic criteria inspired by works in the domain of office automation: Compatibility, Guidance, Workload, Adaptability, Consistency, Significance of codes, Explicit control and Error management; and one ergonomic criterion related to videogame: the game rules. Perspectives derived from this proposal are also discussed.

Designing appropriate complementary feeding recommendations: tools for programmatic action.

Science.gov (United States)

Daelmans, Bernadette; Ferguson, Elaine; Lutter, Chessa K; Singh, Neha; Pachón, Helena; Creed-Kanashiro, Hilary; Woldt, Monica; Mangasaryan, Nuné; Cheung, Edith; Mir, Roger; Pareja, Rossina; Briend, André

2013-09-01

Suboptimal complementary feeding practices contribute to a rapid increase in the prevalence of stunting in young children from age 6 months. The design of effective programmes to improve infant and young child feeding requires a sound understanding of the local situation and a systematic process for prioritizing interventions, integrating them into existing delivery platforms and monitoring their implementation and impact. The identification of adequate food-based feeding recommendations that respect locally available foods and address gaps in nutrient availability is particularly challenging. We describe two tools that are now available to strengthen infant and young child-feeding programming at national and subnational levels. ProPAN is a set of research tools that guide users through a step-by-step process for identifying problems related to young child nutrition; defining the context in which these problems occur; formulating, testing, and selecting behaviour-change recommendations and nutritional recipes; developing the interventions to promote them; and designing a monitoring and evaluation system to measure progress towards intervention goals. Optifood is a computer-based platform based on linear programming analysis to develop nutrient-adequate feeding recommendations at lowest cost, based on locally available foods with the addition of fortified products or supplements when needed, or best recommendations when the latter are not available. The tools complement each other and a case study from Peru illustrates how they have been used. The readiness of both instruments will enable partners to invest in capacity development for their use in countries and strengthen programmes to address infant and young child feeding and prevent malnutrition. © 2013 John Wiley & Sons Ltd.

License Application Design Selection Feature Report: Waste Package Self Shielding Design Feature 13

International Nuclear Information System (INIS)

Tang, J.S.

2000-01-01

In the Viability Assessment (VA) reference design, handling of waste packages (WPs) in the emplacement drifts is performed remotely, and human access to the drifts is precluded when WPs are present. This report will investigate the feasibility of using a self-shielded WP design to reduce the radiation levels in the emplacement drifts to a point that, when coupled with ventilation, will create an acceptable environment for human access. This provides the benefit of allowing human entry to emplacement drifts to perform maintenance on ground support and instrumentation, and carry out performance confirmation activities. More direct human control of WP handling and emplacement operations would also be possible. However, these potential benefits must be weighed against the cost of implementation, and potential impacts on pre- and post-closure performance of the repository and WPs. The first section of this report will provide background information on previous investigations of the self-shielded WP design feature, summarize the objective and scope of this document, and provide quality assurance and software information. A shielding performance and cost study that includes several candidate shield materials will then be performed in the subsequent section to allow selection of two self-shielded WP design options for further evaluation. Finally, the remaining sections will evaluate the impacts of the two WP self-shielding options on the repository design, operations, safety, cost, and long-term performance of the WPs with respect to the VA reference design

License Application Design Selection Feature Report Canistered Assemblies

International Nuclear Information System (INIS)

Bennett, Scott M.

1999-01-01

The objective of the Modified Waste Emplacement Mode Design Alternative Report is to identify, describe, and evaluate waste package emplacement modes against a specified set of evaluation criteria. This evaluation of the design alternative will be used as input to the decision-making process used to identify the EDAs. The EDAs will, in turn, be evaluated against a set of evaluation criteria, and their evaluations will be used as the basis for an M and O recommendation on the LA design

Brownfields Recommendations for Sustainable Site Design — Green Landscape Plan

Science.gov (United States)

The assessment of conditions contained in this report focuses on site-specific environmental and soil conditions that might affect recommendations related to sustainable landscaping and site design, stormwater management, and stormwater reuse.

Recommended revisions to Nuclear Regulatory Commission seismic design criteria. Technical report

International Nuclear Information System (INIS)

Coats, D.W.

1980-05-01

This report recommends changes in the Nuclear Regulatory Commission's (NRC's) criteria now used in the seismic design of nuclear power plants. Areas covered include ground motion, soil-structure interaction, structures, and equipment and components. Members of the Engineering Mechanics Section of the Nuclear Test Engineering Division at Lawrence Livermore Laboratory (LLL) generally agreed upon the recommendations, which are based on (1) reports developed under the NRC's Task Action Plan A-40, (2) other available engineering literature, and (3) recommendations of nationally recognized experts retained by LLL specifically for this task

EPR design features to mitigate severe accident challenges

International Nuclear Information System (INIS)

Mazurkiewicz, S.M.; Fischer, M.; Bittermann, D.

2005-01-01

The EPR, an evolutionary pressurized water reactor (PWR), is a 4300-4500 MWth that incorporates proven technology within an optimized configuration to enhance safety. EPR was originally developed through a joint effort between Framatome ANP and Siemens by incorporating the best technological features from the French and German nuclear reactor fleets into a cost-competitive product. Commercial EPR units are currently being built in Finland at the Olkiluoto site, and planned for France at the Flamanville site. In recent months, Framatome ANP announced their intention to market the EPR units to China in response to a request for vendor bids as well as their intent to pursue design certification in the United States under 10CFR52. The EPR safety philosophy is based on a deterministic consideration of defense-in-depth complemented by probabilistic analyses. Not only is the EPR designed to prevent and mitigate design basis accidents (DBAs), it employs an extra level of safety associated with severe accident response. Therefore, as a design objective, features are included to ensure that radiological consequences are limited such that the need for stringent counter measures, such as evacuation and relocation of the nearby population, can be reasonably excluded. This paper discusses some of the innovative features of the EPR to address severe accident challenges. (author)

Recommendations for the Design of Serious Games in Neurodegenerative Diseases

Directory of Open Access Journals (Sweden)

Grégory Ben-Sadoun

2018-02-01

Full Text Available The use of Serious Games (SG in the health domain is expanding. In the field of Neurodegenerative Diseases (ND such as Alzheimer’s Disease, SG are currently employed to provide alternative solutions for patients’ treatment, stimulation, and rehabilitation. The design of SG for people with ND implies collaborations between professionals in ND and professionals in SG design. As the field is quite young, professionals specialized in both ND and SG are still rare, and recommendations for the design of SG for people with ND are still missing. This perspective paper aims to provide recommendations in terms of ergonomic choices for the design of SG aiming at stimulating people with ND, starting from the existing SG already tested in this population: “MINWii”, “Kitchen and Cooking”, and “X-Torp”. We propose to rely on nine ergonomic criteria: eight ergonomic criteria inspired by works in the domain of office automation: Compatibility, Guidance, Workload, Adaptability, Consistency, Significance of codes, Explicit control and Error management; and one ergonomic criterion related to videogame: the game rules. Perspectives derived from this proposal are also discussed.

The ACR: Advanced design features for a short construction schedule

International Nuclear Information System (INIS)

Elgohary, M.; Fairclough, N.

2003-01-01

Building on the successful CANDU construction at Qinshan, the ACR-700 is designed with constructability considerations as a major requirement during all project phases from the concept design stage to the detail design stage. A project schedule of 48 months has been developed for the nth ACR unit with a 36 months construction period from First Concrete to Fuel Load. This paper describes some of the advanced design features implemented in the reactor building design in order to achieve this short construction period. These features include large volume concrete pours, prefabricated rebar, composite structures, prefabricated permanent formwork and significant modularization and prefabrication

Need for intraoperative ultrasound and surgical recommendation for partial nephrectomy: correlation with tumor imaging features and urologist practice patterns.

Science.gov (United States)

Sun, Maryellen R M; Wagner, Andrew A; San Francisco, Ignacio F; Brook, Alexander; Kavoussi, Louis; Russo, Paul; Steele, Graeme; Viterbo, Rosalia; Pedrosa, Ivan

2012-03-01

This study aimed to evaluate the need for intraoperative ultrasound (IOUS) and recommendation for surgical approach in the resection of renal tumors through a survey of practicing urologists, with correlation to tumor imaging features and urologist practice pattern. An institutional review board-approved retrospective review, compliant with the Health Insurance Portability and Accountability Act, of 44 renal tumors that underwent laparoscopic partial nephrectomy at the study institution was performed. The numeric component of the RENAL nephrometry score (radius [diameter], % exophytic, nearness [to collecting system/renal sinus], location) was calculated for each case using preoperative computed tomography/magnetic resonance imaging. Five anonymized images of each tumor were presented to 4 academic urologists with varying practice patterns. Reviewers independently scored each case for its need for IOUS, for recommendation of a surgical technique, and for the difficulty of the proposed surgery. The RENAL scores were as follows: RENAL 1 (low complexity, score 4-6; n = 19); RENAL 2 (moderate complexity, score 7-9; n = 23); RENAL 3 (high complexity, score 10-12; n = 2). The only RENAL score component significantly influencing need for IOUS was percentage exophytic (P = 0.00002). There was an inverse relationship between normalized and averaged need for IOUS and percentage exophytic (P recommendation of surgical method was the reviewer him/herself, with each reviewer's recommendations closely matching his/her practice pattern. Size and percentage exophytic represented the only tumor features significantly (P = 0.03) influencing surgical recommendation. There was a significant difference in the perceived need for IOUS and surgical recommendation when 4 academic urologists reviewed a series of renal masses requiring resection. Percentage exophytic correlated inversely with need for IOUS. Urologist's practice pattern and tumor size and percentage exophytic were most

Metamodels for Computer-Based Engineering Design: Survey and Recommendations

Science.gov (United States)

Simpson, Timothy W.; Peplinski, Jesse; Koch, Patrick N.; Allen, Janet K.

1997-01-01

The use of statistical techniques to build approximations of expensive computer analysis codes pervades much of todays engineering design. These statistical approximations, or metamodels, are used to replace the actual expensive computer analyses, facilitating multidisciplinary, multiobjective optimization and concept exploration. In this paper we review several of these techniques including design of experiments, response surface methodology, Taguchi methods, neural networks, inductive learning, and kriging. We survey their existing application in engineering design and then address the dangers of applying traditional statistical techniques to approximate deterministic computer analysis codes. We conclude with recommendations for the appropriate use of statistical approximation techniques in given situations and how common pitfalls can be avoided.

Design Features of Modern Mechanical Ventilators.

Science.gov (United States)

MacIntyre, Neil

2016-12-01

A positive-pressure breath ideally should provide a V T that is adequate for gas exchange and appropriate muscle unloading while minimizing any risk for injury or discomfort. The latest generation of ventilators uses sophisticated feedback systems to sculpt positive-pressure breaths according to patient effort and respiratory system mechanics. Currently, however, these new control strategies are not totally closed-loop systems. This is because the automatic input variables remain limited, some clinician settings are still required, and the specific features of the perfect breath design still are not entirely clear. Despite these limitations, there are some rationale for many of these newer feedback features. Copyright © 2016 Elsevier Inc. All rights reserved.

Mental Health Smartphone Apps: Review and Evidence-Based Recommendations for Future Developments.

Science.gov (United States)

Bakker, David; Kazantzis, Nikolaos; Rickwood, Debra; Rickard, Nikki

2016-03-01

The number of mental health apps (MHapps) developed and now available to smartphone users has increased in recent years. MHapps and other technology-based solutions have the potential to play an important part in the future of mental health care; however, there is no single guide for the development of evidence-based MHapps. Many currently available MHapps lack features that would greatly improve their functionality, or include features that are not optimized. Furthermore, MHapp developers rarely conduct or publish trial-based experimental validation of their apps. Indeed, a previous systematic review revealed a complete lack of trial-based evidence for many of the hundreds of MHapps available. To guide future MHapp development, a set of clear, practical, evidence-based recommendations is presented for MHapp developers to create better, more rigorous apps. A literature review was conducted, scrutinizing research across diverse fields, including mental health interventions, preventative health, mobile health, and mobile app design. Sixteen recommendations were formulated. Evidence for each recommendation is discussed, and guidance on how these recommendations might be integrated into the overall design of an MHapp is offered. Each recommendation is rated on the basis of the strength of associated evidence. It is important to design an MHapp using a behavioral plan and interactive framework that encourages the user to engage with the app; thus, it may not be possible to incorporate all 16 recommendations into a single MHapp. Randomized controlled trials are required to validate future MHapps and the principles upon which they are designed, and to further investigate the recommendations presented in this review. Effective MHapps are required to help prevent mental health problems and to ease the burden on health systems.

A Classification-based Review Recommender

Science.gov (United States)

O'Mahony, Michael P.; Smyth, Barry

Many online stores encourage their users to submit product/service reviews in order to guide future purchasing decisions. These reviews are often listed alongside product recommendations but, to date, limited attention has been paid as to how best to present these reviews to the end-user. In this paper, we describe a supervised classification approach that is designed to identify and recommend the most helpful product reviews. Using the TripAdvisor service as a case study, we compare the performance of several classification techniques using a range of features derived from hotel reviews. We then describe how these classifiers can be used as the basis for a practical recommender that automatically suggests the mosthelpful contrasting reviews to end-users. We present an empirical evaluation which shows that our approach achieves a statistically significant improvement over alternative review ranking schemes.

Safety analysis for key design features of KALIMER-600 design concept

International Nuclear Information System (INIS)

Lee, Yong-Bum; Kwon, Y. M.; Kim, E. K.; Suk, S. D.; Chang, W. P.; Joeng, H. Y.; Ha, K. S.; Heo, S.

2005-03-01

KAERI is developing the conceptual design of a Liquid Metal Reactor, KALIMER-600 (Korea Advanced LIquid MEtal Reactor) under the Long-term Nuclear R and D Program. KALIMER-600 addresses key issues regarding future nuclear power plants such as plant safety, economics, proliferation, and waste. In this report, key safety design features are described and safety analyses results for typical ATWS accidents, containment design basis accidents, and flow blockages in the KALIMER design are presented. First, the basic approach to achieve the safety goal and main design features of KALIMER-600 are introduced in Chapter 1, and the event categorization and acceptance criteria for the KALIMER-600 safety analysis are described in Chapter 2, In Chapter 3, results of inherent safety evaluations for the KALIMER-600 conceptual design are presented. The KALIMER-600 core and plant system are designed to assure benign performance during a selected set of events without either reactor control or protection system intervention. Safety analyses for the postulated anticipated transient without scram (ATWS) have been performed using the SSC-K code to investigate the KALIMER-600 system response to the events. The objectives of Chapter 4, are to assess the response of KALIMER-600 containment to the design basis accidents and to evaluate whether the consequences are acceptable or not in the aspect of structural integrity and the exposure dose rate. In Chapter 5, the analysis of flow blockage for KALIMER-600 with the MATRA-LMR-FB code, which has been developed for the internal flow blockage in a LMR subassembly, are described. The cases with a blockage of 6-subchannel, 24-subchannel, and 54-subchannel are analyzed

Major NSSS design features of the Korean next generation reactor

International Nuclear Information System (INIS)

Kim, Insk; Kim, Dong-Su

1999-01-01

In order to meet national needs for increasing electric power generation in the Republic of Korea in the 2000s, the Korean nuclear development group (KNDG) is developing a standardized evolutionary advanced light water reactor (ALWR), the Korean Next Generation Reactor (KNGR). It is an advanced version of the successful Korean Standard Nuclear Power Plant (KSNP) design, which meets utility needs for safety enhancement, performance improvement and ease of operation and maintenance. The KNGR design starts fro the proven design concept of the currently operating KSNPs with uprated power and advanced design features required by the utility. The KNGR design is currently in the final stage of the basic design, and the paper describes the major nuclear steam supply system (NSSS) design features of the KNGR together with introduction of the KNGR development program. (author)

Evaluating public awareness of new currency design features

Science.gov (United States)

DiNunzio, Lisa; Church, Sara E.

2002-04-01

One of the goals of the 1996 series design was to integrate highly recognizable features that enable the general public to more easily distinguish counterfeit from genuine notes, thereby reducing the chance of counterfeit notes being passed. The purpose of this study is to evaluate how knowledgeable the public is concerning the new currency, to identify the channels through which the public learns about new currency design, and to assess the usefulness of the new currency's authentication features. Also, the study will serve as a baseline measurement for future design studies and in comparative analysis with other countries. The results of the qualitative research will be described in the following sections of this paper. The quantitative research is scheduled to begin in February 2002, at the same time as the Netherlands' opinion poll of the Euro and NLG-notes in an effort to compare results.

User interface design for mobile-based sexual health interventions for young people: design recommendations from a qualitative study on an online Chlamydia clinical care pathway.

Science.gov (United States)

Gkatzidou, Voula; Hone, Kate; Sutcliffe, Lorna; Gibbs, Jo; Sadiq, Syed Tariq; Szczepura, Ala; Sonnenberg, Pam; Estcourt, Claudia

2015-08-26

The increasing pervasiveness of mobile technologies has given potential to transform healthcare by facilitating clinical management using software applications. These technologies may provide valuable tools in sexual health care and potentially overcome existing practical and cultural barriers to routine testing for sexually transmitted infections. In order to inform the design of a mobile health application for STIs that supports self-testing and self-management by linking diagnosis with online care pathways, we aimed to identify the dimensions and range of preferences for user interface design features among young people. Nine focus group discussions were conducted (n = 49) with two age-stratified samples (16 to 18 and 19 to 24 year olds) of young people from Further Education colleges and Higher Education establishments. Discussions explored young people's views with regard to: the software interface; the presentation of information; and the ordering of interaction steps. Discussions were audio recorded and transcribed verbatim. Interview transcripts were analysed using thematic analysis. Four over-arching themes emerged: privacy and security; credibility; user journey support; and the task-technology-context fit. From these themes, 20 user interface design recommendations for mobile health applications are proposed. For participants, although privacy was a major concern, security was not perceived as a major potential barrier as participants were generally unaware of potential security threats and inherently trusted new technology. Customisation also emerged as a key design preference to increase attractiveness and acceptability. Considerable effort should be focused on designing healthcare applications from the patient's perspective to maximise acceptability. The design recommendations proposed in this paper provide a valuable point of reference for the health design community to inform development of mobile-based health interventions for the diagnosis

Understanding Cooperative Learning in Context-aware Recommender Systems

DEFF Research Database (Denmark)

Jiang, Na; Tan, Chee-Wee; Wang, Weiquan

2017-01-01

Context-Aware Recommender Systems (CARSs) are becoming commonplace. Yet, there is a paucity of studies that investigates how such systems could affect usage behavior from a user-system interaction perspective. Building on the Social Interdependence Theory (SIT), we construct a research model...... of users’ promotive interaction with CARSs, which in turn, dictates the performance of such recommender systems. Furthermore, we introduce scrutability features as design interventions that can be harnessed by developers to mitigate the impact of users’ promotive interaction on the performance of CARSs....

HANARO cooling features: design and experience

International Nuclear Information System (INIS)

Park, Cheol; Chae, Hee-Taek; Han, Gee-Yang; Jun, Byung-Jin; Ahn, Guk-Hoon

1999-01-01

In order to achieve the safe core cooling during normal operation and upset conditions, HANARO adopted an upward forced convection cooling system with dual containment arrangements instead of the forced downward flow system popularly used in the majority of forced convection cooling research reactors. This kind of upward flow system was selected by comparing the relative merits of upward and downward flow systems from various points of view such as safety, performance, maintenance. However, several operational matters which were not regarded as serious at design come out during operation. In this paper are presented the design and operational experiences on the unique cooling features of HANARO. (author)

Nutrition warnings as front-of-pack labels: influence of design features on healthfulness perception and attentional capture.

Science.gov (United States)

Cabrera, Manuel; Machín, Leandro; Arrúa, Alejandra; Antúnez, Lucía; Curutchet, María Rosa; Giménez, Ana; Ares, Gastón

2017-12-01

Warnings are a new directive front-of-pack (FOP) nutrition labelling scheme that highlights products with high content of key nutrients. The design of warnings influences their ability to catch consumers' attention and to clearly communicate their intended meaning, which are key determinants of their effectiveness. The aim of the present work was to evaluate the influence of design features of warnings as a FOP nutrition labelling scheme on perceived healthfulness and attentional capture. Five studies with a total of 496 people were carried out. In the first study, the association of colour and perceived healthfulness was evaluated in an online survey in which participants had to rate their perceived healthfulness of eight colours. In the second study, the influence of colour, shape and textual information on perceived healthfulness was evaluated using choice-conjoint analysis. The third study focused on implicit associations between two design features (shape and colour) on perceived healthfulness. The fourth and fifth studies used visual search to evaluate the influence of colour, size and position of the warnings on attentional capture. Perceived healthfulness was significantly influenced by shape, colour and textual information. Colour was the variable with the largest contribution to perceived healthfulness. Colour, size and position of the warnings on the labels affected attentional capture. Results from the experiments provide recommendations for the design of warnings to identify products with unfavourable nutrient profile.

Design features of SMART for barge mounted application

International Nuclear Information System (INIS)

Doo-Jeong Lee; Ju-Hyeon Yoon; Ju-Pyung Kim; Jong-In Kim; Moon-Hee Chang

2000-01-01

SMART is an integral reactor of 330 MWt capacity with passive safety features being developed for a wide range of applications including the barge mounted co-generation plant. Its design strives to combine the firmly-established commercial reactor design with new advanced technologies. Thus the use of the industry proven KOFA (Korea Optimized Fuel Assembly) based nuclear fuels is pursued while such radically new technologies as self-pressurizing pressurizer, helical once-through steam generators, and advanced control concepts are being developed. The safety of SMART centers around enhancing the inherent safety characteristics of the reactor and salient features include low core power density, integral arrangement to eliminate large break loss of coolant accident, etc. The progression of emergency situations into accidents is prevented with a number of advanced engineered safety features such as Passive Residual Heat Removal System, Passive Emergency Core Cooling System, Safeguard Vessel, Passive Containment Over-pressure Protection. This paper presents the status of current SMART development, characteristics of SMART safety systems and the possibility of SMART application to barge mounted environment. (author)

Recommended revisions to nuclear regulatory commission seismic design criteria

International Nuclear Information System (INIS)

Coats, D.W.

1981-01-01

Task Action Plan (TAP) A-40 was developed by consolidating specific technical assistance studies initiated to identify and quantify the conservatism inherent in the seismic design sequence of current NRC criteria. Task 10 of TAP A-40 provided a technical review of the results of the other nine engineering and seismological tasks in TAP A-40 and recommended changes to the existing NRC criteria based on this review. We used the team approach to accomplish the objectives of Task 10 in an efficient manner and to provide the best technical product possible within the limited time available. The team consisted of a core group of Lawrence Livermore National Laboratory personnel and selected consultants. The recommendations summarized in this paper were not based solely on the results of the tasks in TAP A-40 but went far beyond that data base to encompass all available and appropriate literature. Some recommendations are based on the expertise of core members and consultants that stem from unpublished data, research, and experience. Copies of the pertinent sections of the Standard Review Plan (SRP) and Regulatory Guides as well as the reports developed under TAP A-40 were provided to the participants. These reports, other available engineering literature, and the experience of the consultants and core group provided technical basis for the recommendations. (orig./HP)

ICT and UD: Preliminary Study for Recommendations to Design Accessible University Courses.

Science.gov (United States)

Pagliara, Silvio Marcello; Sánchez Utgé, Marta; De Anna, Lucia

2017-01-01

Starting from the Universal Design in the educational context principles, the experiences gained during the FIRB project "Net@ccessibility" and the high-education courses for teachers' specialization on special education, this research will focus on preliminary studies in order to define the recommendations for designing accessible university courses.

Prevalence of Recommendations Made Within Dental Research Articles Using Uncontrolled Intervention or Observational Study Designs.

Science.gov (United States)

Wilson, M K; Chestnutt, I G

2016-03-01

Evidence to inform clinical practice is reliant on research carried out using appropriate study design. The objectives of this work were to (i) identify the prevalence of articles reporting on human studies using uncontrolled intervention or observational research designs published in peer-reviewed dental journals and (ii) determine the nature of recommendations made by these articles. Six peer-reviewed dental journals were selected. Issues published in January to June 2013 were examined and the types of articles published categorized. Following pre-defined inclusion/exclusion criteria, human studies classified as using uncontrolled intervention or observational research designs were subject to detailed review by two independent investigators, to examine if they presented clinical, policy or research recommendations and if these recommendations were supported by the data presented. 52.9% (n = 156) of studies published during the time period met the inclusion criteria. Studies with uncontrolled intervention or observational research designs comprised a larger proportion of the primary research studies published in the journals with lower impact factors (73.3%; n = 107) compared to the high impact journals (38.9%; n = 49). Analysis showed that 60.9% (n = 95) of the included studies made recommendations for clinical practice/dental policy. In 28.2% (n = 44) of studies, the clinical/policy recommendations made were judged to not be fully supported by the data presented. Many studies published in the current dental literature, which are not considered to produce strong evidence, make recommendations for clinical practice or policy. There were some cases when the recommendations were not fully supported by the data presented. Copyright © 2016 Elsevier Inc. All rights reserved.

The design and safety features of the IRIS reactor

International Nuclear Information System (INIS)

Carelli, Mario D.; Conway, L.E.; Oriani, L.; Petrovic, B.; Lombardi, C.V.; Ricotti, M.E.; Barroso, A.C.O.; Collado, J.M.; Cinotti, L.; Todreas, N.E.; Grgic, D.; Moraes, M.M.; Boroughs, R.D.; Ninokata, H.; Ingersoll, D.T.; Oriolo, F.

2004-01-01

Salient features of the International Reactor Innovative and Secure (IRIS) are presented here. IRIS, an integral, modular, medium size (335 MWe) PWR, has been under development since the turn of the century by an international consortium led by Westinghouse and including over 20 organizations from nine countries. Described here are the features of the integral design which includes steam generators, pumps and pressurizer inside the vessel, together with the core, control rods, and neutron reflector/shield. A brief summary is provided of the IRIS approach to extended maintenance over a 48-month schedule. The unique IRIS safety-by-design approach is discussed, which, by eliminating accidents, at the design stage, or decreasing their consequences/probabilities when outright elimination is not possible, provides a very powerful first level of defense in depth. The safety-by-design allows a significant reduction and simplification of the passive safety systems, which are presented here, together with an assessment of the IRIS response to transients and postulated accidents

Examining the design features of a communication-rich, problem-centred mathematics professional development

Science.gov (United States)

de Araujo, Zandra; Orrill, Chandra Hawley; Jacobson, Erik

2018-04-01

While there is considerable scholarship describing principles for effective professional development, there have been few attempts to examine these principles in practice. In this paper, we identify and examine the particular design features of a mathematics professional development experience provided for middle grades teachers over 14 weeks. The professional development was grounded in a set of mathematical tasks that each had one right answer, but multiple solution paths. The facilitator engaged participants in problem solving and encouraged participants to work collaboratively to explore different solution paths. Through analysis of this collaborative learning environment, we identified five design features for supporting teacher learning of important mathematics and pedagogy in a problem-solving setting. We discuss these design features in depth and illustrate them by presenting an elaborated example from the professional development. This study extends the existing guidance for the design of professional development by examining and operationalizing the relationships among research-based features of effective professional development and the enacted features of a particular design.

New features in the design code TLIE

International Nuclear Information System (INIS)

van Zeijts, J.

1993-01-01

We present features recently installed in the arbitrary-order accelerator design code TLIE. The code uses the MAD input language, and implements programmable extensions modeled after the C language that make it a powerful tool in a wide range of applications: from basic beamline design to high precision-high order design and even control room applications. The basic quantities important in accelerator design are easily accessible from inside the control language. Entities like parameters in elements (strength, current), transfer maps (either in Taylor series or in Lie algebraic form), lines, and beams (either as sets of particles or as distributions) are among the type of variables available. These variables can be set, used as arguments in subroutines, or just typed out. The code is easily extensible with new datatypes

EC6 design features and pre-project licensing review

Energy Technology Data Exchange (ETDEWEB)

Yu, S.; Lee, A.G.; Dinh, N.B.; Soulard, M. [CANDU Energy Inc., Mississauga, Ontario, (Canada)

2013-07-01

The Enhanced CANDU 6 (EC6) is the new Generation III CANDU reactor design that meets the most up to date Canadian regulatory requirements and customer expectations. Candu Energy Inc. is finalizing development of the EC6 which incorporates the CANDU 6's well-proven features, and adds enhancements that strengthened reactor safety margin and improved operability. The EC6 builds on the proven high performance design and the defence-in-depth features of CANDU 6 units, and has incorporated extensive operational feedback including lessons learned from Fukushima. This paper will provide status of the engineering program including progress on the pre-licensing review of the EC6 design by the Canadian Regulator, CNSC, and will also highlight the design and safety enhancements incorporated in the EC6 product. Safety enhancements to meet safety goals and to improve robustness of systems to respond to design basis accidents and beyond design basis accidents include: new severe accident recovery and heat removal system; improved emergency heat removal system; faster shutoff rods with improved safety margins; mechanical guaranteed shutdown rods; daily load cycling capability; robust containment with containment filter venting system; and improved backed-up electrical supply and cooling services. (author)

Joint Feature Extraction and Classifier Design for ECG-Based Biometric Recognition.

Science.gov (United States)

Gutta, Sandeep; Cheng, Qi

2016-03-01

Traditional biometric recognition systems often utilize physiological traits such as fingerprint, face, iris, etc. Recent years have seen a growing interest in electrocardiogram (ECG)-based biometric recognition techniques, especially in the field of clinical medicine. In existing ECG-based biometric recognition methods, feature extraction and classifier design are usually performed separately. In this paper, a multitask learning approach is proposed, in which feature extraction and classifier design are carried out simultaneously. Weights are assigned to the features within the kernel of each task. We decompose the matrix consisting of all the feature weights into sparse and low-rank components. The sparse component determines the features that are relevant to identify each individual, and the low-rank component determines the common feature subspace that is relevant to identify all the subjects. A fast optimization algorithm is developed, which requires only the first-order information. The performance of the proposed approach is demonstrated through experiments using the MIT-BIH Normal Sinus Rhythm database.

The Impact Of Website Design Features On Behavioral Intentions

Directory of Open Access Journals (Sweden)

Chun-Chin Chiu

2015-08-01

Full Text Available The design of a website interface plays an important role in online purchasing and customers are more likely to visit and buy from better-designed websites. However previous studies have not provided consistent information about the features a website should provide. Based on Hausman and Siekpes 2009 comprehensive model this study aims to empirically verify whether the model can be applied in e-service markets to predict and explain website users behavioral intentions trade intentions and revisit intentions. Based on the data from a survey of 303 Internet users the results indicate that computer factors and human factors the key website design features are significantly related to website users experiences perceived usefulness perceived entertainment value and perceived informativeness in turn significantly affect the intermediary outcomes of attitude toward the site and ultimately influence users behavioral intentions.

Developing a semantic web model for medical differential diagnosis recommendation.

Science.gov (United States)

Mohammed, Osama; Benlamri, Rachid

2014-10-01

In this paper we describe a novel model for differential diagnosis designed to make recommendations by utilizing semantic web technologies. The model is a response to a number of requirements, ranging from incorporating essential clinical diagnostic semantics to the integration of data mining for the process of identifying candidate diseases that best explain a set of clinical features. We introduce two major components, which we find essential to the construction of an integral differential diagnosis recommendation model: the evidence-based recommender component and the proximity-based recommender component. Both approaches are driven by disease diagnosis ontologies designed specifically to enable the process of generating diagnostic recommendations. These ontologies are the disease symptom ontology and the patient ontology. The evidence-based diagnosis process develops dynamic rules based on standardized clinical pathways. The proximity-based component employs data mining to provide clinicians with diagnosis predictions, as well as generates new diagnosis rules from provided training datasets. This article describes the integration between these two components along with the developed diagnosis ontologies to form a novel medical differential diagnosis recommendation model. This article also provides test cases from the implementation of the overall model, which shows quite promising diagnostic recommendation results.

Design features of the radioactive Liquid-Fed Ceramic Melter system

International Nuclear Information System (INIS)

Holton, L.K. Jr.

1985-06-01

During 1983, the Pacific Northwest Laboratory (PNL), at the request of the Department of Energy (DOE), undertook a program with the principal objective of testing the Liquid-Fed Ceramic Melter (LFCM) process in actual radioactive operations. This activity, termed the Radioactive LFCM (RLFCM) Operations is being conducted in existing shielded hot-cell facilities in B-Cell of the 324 Building, 300 Area, located at Hanford, Washington. This report summarizes the design features of the RLFCM system. These features include: a waste preparation and feed system which uses pulse-agitated waste preparation tanks for waste slurry agitation and an air displacement slurry pump for transferring waste slurries to the LFCM; a waste vitrification system (LFCM) - the design features, design approach, and reasoning for the design of the LFCM are described; a canister-handling turntable for positioning canisters underneath the RLFCM discharge port; a gamma source positioning and detection system for monitoring the glass fill level of the product canisters; and a primary off-gas treatment system for removing the majority of the radionuclide contamination from the RLFCM off gas. 8 refs., 48 figs., 6 tabs

Design features of an automated entry control system

International Nuclear Information System (INIS)

Reynolds, D.A.

1978-01-01

Features of an entry control system designed to automatically control access to nuclear facilities is described. Control independent of variable human factors is stressed, but security force action is required for assessment and response as a result of an alarm. A design based on a distributed processing capability is utilized. Flexibility and generality are emphasized in an effort to maximize applicability to the entry-control problem faced by nuclear facilities upgrading security as a result of the Safeguards Program

Interface, information, interaction: a narrative review of design and functional requirements for clinical decision support.

Science.gov (United States)

Miller, Kristen; Mosby, Danielle; Capan, Muge; Kowalski, Rebecca; Ratwani, Raj; Noaiseh, Yaman; Kraft, Rachel; Schwartz, Sanford; Weintraub, William S; Arnold, Ryan

2018-05-01

Provider acceptance and associated patient outcomes are widely discussed in the evaluation of clinical decision support systems (CDSSs), but critical design criteria for tools have generally been overlooked. The objective of this work is to inform electronic health record alert optimization and clinical practice workflow by identifying, compiling, and reporting design recommendations for CDSS to support the efficient, effective, and timely delivery of high-quality care. A narrative review was conducted from 2000 to 2016 in PubMed and The Journal of Human Factors and Ergonomics Society to identify papers that discussed/recommended design features of CDSSs that are associated with the success of these systems. Fourteen papers were included as meeting the criteria and were found to have a total of 42 unique recommendations; 11 were classified as interface features, 10 as information features, and 21 as interaction features. Features are defined and described, providing actionable guidance that can be applied to CDSS development and policy. To our knowledge, no reviews have been completed that discuss/recommend design features of CDSS at this scale, and thus we found that this was important for the body of literature. The recommendations identified in this narrative review will help to optimize design, organization, management, presentation, and utilization of information through presentation, content, and function. The designation of 3 categories (interface, information, and interaction) should be further evaluated to determine the critical importance of the categories. Future work will determine how to prioritize them with limited resources for designers and developers in order to maximize the clinical utility of CDSS. This review will expand the field of knowledge and provide a novel organization structure to identify key recommendations for CDSS.

License Application Design Selection Feature Report: Aging and Blending

International Nuclear Information System (INIS)

Coltoni, B.; Anderson, M.J.

1999-01-01

The purpose of this document is to evaluate the concepts of Aging and Blending for waste sent to the Monitored Geologic Repository (MGR). These design features are based on pre-emplacement treatment of the waste stream. The envelope of the analysis has been performed under the direction of the License Application Design Selection Team (LADST), which advocated utilizing the Viability Assessment (VA) repository design (DOE 1998c) as the basis. Therefore, this evaluation attempts to modify the VA design only to the extent that Aging and Blending can be accomplished. This modified VA design will be contrasted to the VA Design and the difference in design, costs, and performance will be presented

The Design and Development of Online Course Materials: Some Features and Recommendations (El diseño y desarrollo de materiales para cursos en línea: algunos rasgos y recomendaciones)

Science.gov (United States)

Cuesta, Liliana

2010-01-01

This article discusses various features in the design and implementation of online course materials. The author provides a critical review of some instructional design patterns and expands on the alignment among instruction, motivation and learners' performances as part of a curriculum design process. In this context, the author emphasizes the…

Do Particular Design Features Assist People with Aphasia to Comprehend Text? An Exploratory Study

Science.gov (United States)

Wilson, Lucy; Read, Jennifer

2016-01-01

Background: Much of the evidence underlying guidelines for producing accessible information for people with aphasia focuses on client preference for particular design features. There is limited evidence regarding the effects of these features on comprehension. Aims: To examine the effects of specific design features on text comprehension. It was…

Innovative features and fuel design approach in the iris reactor

International Nuclear Information System (INIS)

Petrovic, B.; Carelli, M.; Greenspan, E.; Matsumoto, H.; Padovani, E.; Ganda, F.

2002-01-01

The International Reactor Innovative and Secure (IRIS) is being developed by an international consortium of industry, laboratory, university and utility establishments, led by Westinghouse. The IRIS design addresses key requirements associated with advanced reactors, including improved safety, enhanced proliferation resistance, competitive electricity production cost, and improved waste management. IRIS is a modular, small/medium size (335 MWe) PWR with an integral vessel configuration. The objective has been to base its design on proven LWR technology, so that no new technology development is needed and near-term deployment is possible, yet at the same time to introduce innovative features making it attractive when compared to present PWRs. These opposing requirements resulted in an evolutionary approach to fuel and core design, balancing new features against the need to avoid extensive testing and demonstration programmes. (author)

Design Feature 7: Continuous Preclosure Ventilation

International Nuclear Information System (INIS)

A.T. Watkins

1999-01-01

This design feature (DF) is intended to evaluate the effects of continuous ventilation in the emplacement drifts during preclosure and how the effects, if any, compare to the Viability Assessment (VA) reference design for postclosure long term performance. This DF will be evaluated against a set of criteria provided by the License Application Design Selection (LADS) group. The VA reference design included a continuous ventilation airflow quantity of 0.1 m 3 /s in the emplacement drifts in the design of the repository subsurface facilities. The effects of this continuous ventilation during the preclosure was considered to have a negligible effect on postclosure performance and therefore is not included during postclosure in the assessment of the long term performance. This DF discusses the effects of continuous ventilation on the emplacement drift environment and surrounding rock conditions during preclosure for three increased airflow quantities. The three cases of continuous ventilation systems are: System A, 1.0 m 3 /s (Section 8), System B, 5.0 m 3 /s (Section 9), and System C, 10.0 m 3 /s (Section 10) in each emplacement drift split. An emplacement drift split is half total length of emplacement drift going from the east or west main to the exhaust main. The difference in each system is the quantity of airflow in the emplacement drifts

The key design features of the Indian advanced heavy water reactor

International Nuclear Information System (INIS)

Sinha, R.K.; Kakodkar, A.; Anand, A.K.; Venkat Raj, V.; Balakrishnan, K.

1999-01-01

The 235 MWe Indian Advanced Heavy Water Reactor (AHWR) is a vertical, pressure tube type, boiling light water cooled reactor. The three key specific features of design of the AHWR, having a large impact on its viability, safety and economics, relate to its reactor physics, coolant channel, and passive safety features. The reactor physics design is tuned for maximising use of thorium based fuel, and achieving a slightly negative void coefficient of reactivity. The fulfilment of these requirements has been possible through use of PuO 2 -ThO 2 MOX, and ThO 2 -U 233 O 2 MOX in different pins of the same fuel cluster, and use of a heterogeneous moderator consisting of pyrolytic carbon and heavy water in 80%-20% volume ratio. The coolant channels of AHWR are designed for easy replaceability of pressure tubes, during normal maintenance shutdowns. The removal of pressure tube along with bottom end-fitting, using rolled joint detachment technology, can be done in AHWR coolant channels without disturbing the top end-fitting, tail pipe and feeder connections, and all other appendages of the coolant channel. The AHWR incorporates several passive safety features. These include core heat removal through natural circulation, direct injection of Emergency Core Coolant System (ECCS) water in fuel, passive systems for containment cooling and isolation, and availability of a large inventory of borated water in overhead Gravity Driven Water Pool (GDWP) to facilitate sustenance of core decay heat removal, ECCS injection, and containment cooling for three days without invoking any active systems or operator action. Incorporation of these features has been done together with considerable design simplifications, and elimination of several reactor grade equipment. A rigorous evaluation of feasibility of AHWR design concept has been completed. The economy enhancing aspects of its key design features are expected to compensate for relative complexity of the thorium fuel cycle activities

Design of Phase I Combination Trials: Recommendations of the Clinical Trial Design Task Force of the NCI Investigational Drug Steering Committee

Science.gov (United States)

Paller, Channing J.; Bradbury, Penelope A.; Ivy, S. Percy; Seymour, Lesley; LoRusso, Patricia M.; Baker, Laurence; Rubinstein, Larry; Huang, Erich; Collyar, Deborah; Groshen, Susan; Reeves, Steven; Ellis, Lee M.; Sargent, Daniel J.; Rosner, Gary L.; LeBlanc, Michael L.; Ratain, Mark J.

2014-01-01

Anticancer drugs are combined in an effort to treat a heterogeneous tumor or to maximize the pharmacodynamic effect. The development of combination regimens, while desirable, poses unique challenges. These include the selection of agents for combination therapy that may lead to improved efficacy while maintaining acceptable toxicity, the design of clinical trials that provide informative results for individual agents and combinations, and logistical and regulatory challenges. The phase 1 trial is often the initial step in the clinical evaluation of a combination regimen. In view of the importance of combination regimens and the challenges associated with developing them, the Clinical Trial Design (CTD) Task Force of the National Cancer Institute (NCI) Investigational Drug Steering Committee developed a set of recommendations for the phase 1 development of a combination regimen. The first two recommendations focus on the scientific rationale and development plans for the combination regimen; subsequent recommendations encompass clinical design aspects. The CTD Task Force recommends that selection of the proposed regimens be based on a biological or pharmacological rationale supported by clinical and/or robust and validated preclinical evidence, and accompanied by a plan for subsequent development of the combination. The design of the phase 1 clinical trial should take into consideration the potential pharmacokinetic and pharmacodynamic interactions as well as overlapping toxicity. Depending on the specific hypothesized interaction, the primary endpoint may be dose optimization, pharmacokinetics, and/or pharmacodynamic (i.e., biomarker). PMID:25125258

Overall Design Features and Key Technology Development for KJRR

Energy Technology Data Exchange (ETDEWEB)

Park, C.; Lee, B. C.; Ryu, J. S.; Kim, Y. K. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

The KJRR (Ki-Jang Research Reactor) project was launched on Apr., 2012; 1) to make up the advanced technology related to RRs, 2) to provide the self-sufficiency in terms of medical and industrial radioisotope (RI) supply, and 3) to enlarge the NTD silicon doping services for growing the power device industry. The major facilities to be built through the KJRR project are, • 15 MW Research Reactor and Reactor building • Radioisotopes Production Facility (RIPF) and related R and D Facility • Fission Mo Production Facility (FMPF) with LEU Target • Radio-waste Treatment Facility (RTF) • Neutron Irradiation Facility such as PTS and HTS. This paper describes the overall design features of the KJRR and the key technology development for RRs during the project. The overall design features of the KJRR and RR technology under development have been overviewd. The design of the KJRR will comply with the Korean Nuclear Law, regulatory requirements and guidelines as well as international standards and guidelines. The KJRR is expected to be put into operation in the middle of 2019.

Content and Design Features of Academic Health Sciences Libraries' Home Pages.

Science.gov (United States)

McConnaughy, Rozalynd P; Wilson, Steven P

2018-01-01

The goal of this content analysis was to identify commonly used content and design features of academic health sciences library home pages. After developing a checklist, data were collected from 135 academic health sciences library home pages. The core components of these library home pages included a contact phone number, a contact email address, an Ask-a-Librarian feature, the physical address listed, a feedback/suggestions link, subject guides, a discovery tool or database-specific search box, multimedia, social media, a site search option, a responsive web design, and a copyright year or update date.

TRSDL: Tag-Aware Recommender System Based on Deep Learning–Intelligent Computing Systems

Directory of Open Access Journals (Sweden)

Nan Liang

2018-05-01

Full Text Available In recommender systems (RS, many models are designed to predict ratings of items for the target user. To improve the performance for rating prediction, some studies have introduced tags into recommender systems. Tags benefit RS considerably, however, they are also redundant and ambiguous. In this paper, we propose a hybrid deep learning model TRSDL (tag-aware recommender system based on deep learning to improve the performance of tag-aware recommender systems (TRS. First, TRSDL uses pre-trained word embeddings to represent user-defined tags, and constructs item and user profiles based on the items’ tags set and users’ tagging behaviors. Then, it utilizes deep neural networks (DNNs and recurrent neural networks (RNNs to extract the latent features of items and users, respectively. Finally, it predicts ratings from these latent features. The model not only addresses tag limitations and takes advantage of semantic tag information but also learns more advanced implicit features via deep structures. We evaluated our proposed approach and several baselines on MovieLens-20 m, and the experimental results demonstrate that TRSDL significantly outperforms all the baselines (including the state-of-the-art models BiasedMF and I-AutoRec. In addition, we also explore the impacts of network depth and type on model performance.

Improving Naive Bayes with Online Feature Selection for Quick Adaptation to Evolving Feature Usefulness

Energy Technology Data Exchange (ETDEWEB)

Pon, R K; Cardenas, A F; Buttler, D J

2007-09-19

The definition of what makes an article interesting varies from user to user and continually evolves even for a single user. As a result, for news recommendation systems, useless document features can not be determined a priori and all features are usually considered for interestingness classification. Consequently, the presence of currently useless features degrades classification performance [1], particularly over the initial set of news articles being classified. The initial set of document is critical for a user when considering which particular news recommendation system to adopt. To address these problems, we introduce an improved version of the naive Bayes classifier with online feature selection. We use correlation to determine the utility of each feature and take advantage of the conditional independence assumption used by naive Bayes for online feature selection and classification. The augmented naive Bayes classifier performs 28% better than the traditional naive Bayes classifier in recommending news articles from the Yahoo! RSS feeds.

Design data and safety features of commerical nuclear power plant

International Nuclear Information System (INIS)

Heddleson, F.A.

1976-06-01

Design data, safety features, and site characteristics are summarized for 34 nuclear power units in 17 power stations in the United States. Six pages of data are presented for each plant, consisting of thermal-hydraulic and nuclear factors, containment features, emergency-core-cooling systems, site features, circulating water system data, and miscellaneous factors. An aerial perspective is also presented for each plant. This volume covers Light Water Reactors (LWRs) with dockets 50-508 through 50-549, four HTGRs--50-171, 50-267, 50-450/451, 50-463/464, the Atlantic Floating Station 50-477/478, and the Clinch River Breeder 50-537

Design Features in Games for Health: Disciplinary and Interdisciplinary Expert Perspectives.

Science.gov (United States)

Kelley, Christina; Wilcox, Lauren; Ng, Wendy; Schiffer, Jade; Hammer, Jessica

2017-06-01

Games for health (G4H) aim to improve health outcomes and encourage behavior change. While existing theoretical frameworks describe features of both games and health interventions, there has been limited systematic investigation into how disciplinary and interdisciplinary stakeholders understand design features in G4H. We recruited 18 experts from the fields of game design, behavioral health, and games for health, and prompted them with 16 sample games. Applying methods including open card sorting and triading, we elicited themes and features (e.g., real-world interaction, game mechanics) around G4H. We found evidence of conceptual differences suggesting that a G4H perspective is not simply the sum of game and health perspectives. At the same time, we found evidence of convergence in stakeholder views, including areas where game experts provided insights about health and vice versa. We discuss how this work can be applied to provide conceptual tools, improve the G4H design process, and guide approaches to encoding G4H-related data for large-scale empirical analysis.

Multi-objective optimization of generalized reliability design problems using feature models-A concept for early design stages

International Nuclear Information System (INIS)

Limbourg, Philipp; Kochs, Hans-Dieter

2008-01-01

Reliability optimization problems such as the redundancy allocation problem (RAP) have been of considerable interest in the past. However, due to the restrictions of the design space formulation, they may not be applicable in all practical design problems. A method with high modelling freedom for rapid design screening is desirable, especially in early design stages. This work presents a novel approach to reliability optimization. Feature modelling, a specification method originating from software engineering, is applied for the fast specification and enumeration of complex design spaces. It is shown how feature models can not only describe arbitrary RAPs but also much more complex design problems. The design screening is accomplished by a multi-objective evolutionary algorithm for probabilistic objectives. Comparing averages or medians may hide the true characteristics of this distributions. Therefore the algorithm uses solely the probability of a system dominating another to achieve the Pareto optimal set. We illustrate the approach by specifying a RAP and a more complex design space and screening them with the evolutionary algorithm

Mechanical design features and challenges for the ITER ICRH antenna

Energy Technology Data Exchange (ETDEWEB)

Borthwick, A. [UKAEA/Euratom Fusion Association, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom)], E-mail: andy.borthwick@yahoo.co.uk; Agarici, G. [Fusion for Energy, Barcelona (Spain); Davis, A. [UKAEA/Euratom Fusion Association, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom); Dumortier, P.; Durodie, F. [LPP-ERM-KMS, Association EURATOM-Belgian State, Brussels (Belgium); Fanthome, J.; Hamlyn-Harris, C.; Hancock, A.D.; Lockley, D. [UKAEA/Euratom Fusion Association, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom); Mitteau, R. [Euratom-CEA Association, DSM/IRFM, CEA-Cadarache, 13108 St Paul lez Durance (France); Nightingale, M. [UKAEA/Euratom Fusion Association, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom); Sartori, R. [Fusion for Energy, Barcelona (Spain); Vulliez, K. [Euratom-CEA Association, DSM/IRFM, CEA-Cadarache, 13108 St Paul lez Durance (France)

2009-06-15

The ITER Ion Cyclotron Resonant Heating (ICRH) antenna provides plasma heating at a power of 20 MW. Operation in the ITER environment imposes significant thermal power handling capability, structural integrity, shielding and operations requirements. The design will require a step change over any predecessor in terms of power, scale and complexity. This paper reports the main mechanical design features that address the challenges and often conflicting requirements during the conceptual design phase.

Brownfields Green Avenue Sites: Technical Memorandum - Conceptual Design for Sustainable Redevelopment

Science.gov (United States)

This technical memorandum briefly describes the site and proposed conceptual site plan, indicates conceptual design considerations, specifies recommended green and sustainable features, and offers other recommendations

A study on HCI design strategy using emergent features and response time

International Nuclear Information System (INIS)

Lee, Sung Jin; Chang, Soon Heung; Park, Jin Gyun

2001-01-01

Existing design process of user interface has some weak point that there is no feedback information and no quantitative information between each sub process. If they're such information in design process, the design time cycle will be decreased and the contentment of HCI in the aspect of user will be more easily archived. In this study, new design process with feedback information and quantitative information was proposed using emergent features and user response time. The proposed methodology was put together with three main parts. First part is to calculate distinctiveness of a user interface or expanded user interface with consideration of emergent features. Second part is to expand a prototype user interface with design option for purpose of design requirement using directed structure graph (or nodal graph) theory. Last part is to convert non-realized value, distinctiveness, into realized value, response time, by response time database or response time correlation in the form of Hick-Hyman law equation. From the present validations, the usefulness of the proposed methodology was obtained by simple validation testing. It was found that emergent features should be improved for high reflection of real user interface. For the reliability of response time database, lots of end-user experiment is necessary. Expansion algorithm and representation technique of qualitative information should be somewhat improved for more efficient design process

Design features of Beijing Shijingshan 3 x 200 MW cogeneration plant

International Nuclear Information System (INIS)

Li, T.X.; Ou, Y.Z.

1991-01-01

This paper describes the design feature of Beijing Shijingshan 3 x 200 MW Cogeneration Plant. The design optimized the scheme and system of 200 MW units for heating. The cogeneration plant has achieved comprehensive economic benefit in energy saving and environmental pollution reduction

Design features to achieve defence-in-depth in small and medium sized reactors

International Nuclear Information System (INIS)

Kuznetsov, Vladimir

2009-01-01

Broader incorporation of inherent and passive safety design features has become a 'trademark' of many advanced reactor concepts, including several evolutionary designs and nearly all innovative small and medium sized design concepts. Ensuring adequate defence-in-depth is important for reactors of smaller output because many of them are being designed to allow more proximity to the user, specifically, when non-electrical energy products are targeted. Based on the activities recently performed by the International Atomic Energy Agency, the paper provides a summary description of the design features used to achieve defence in depth in the eleven representative concepts of small and medium sized reactors. (author)

Development of quantitative goals for inherent safety feature design and licensing

International Nuclear Information System (INIS)

Kastenberg, W.E.; Apostolakis, G.; Dhir, V.K.; Okrent, D.

1987-01-01

There is now considerable interest in the development of advanced fast reactors whose major focus is inherent safety. The achievement of inherent safety can be viewed from several aspects. In the Integral Fast Reactor Concept the approach is to utilize the intrinsic characteristics of pool-type liquid metal fast breeder reactors (LMFBRs) and the properties of metal fuels to integrate a high degree of inherent safety into the design. The PRISM and SAFR concepts focus on other inherent safety features. The reactors discussed above represent a radical departure from existing LWR designs as well as previous LMFBR designs (e.g., CRBRP) which are based, for the most part, on the General Design Criteria found in 10CFR50 Appendix. In view of these parallel developments (advanced reactors exploiting inherent safety and the use of quantitative goals to augment licensing), there appears to be a need to perform research on the development of methods for designing, assessing, and licensing inherent safety features in advanced reactors. The objectives of such research are outlined

A User-Centric Diversity by Design Recommender System for the Movie Application Domain

DEFF Research Database (Denmark)

Zanitti, Michele; Kosta, Sokol; Sørensen, Jannick Kirk

2018-01-01

Recommender systems (RS) have seen widespread adoption across the Internet. However, by emphasizing personalization through the optimization of accuracy-focused metrics, over-personalization may emerge, with negative effects on the user experience. A countermeasure to the problem is to diversify...... recommendations. In this paper, we present a solution that addresses the problem in the context of a movie application domain. The solution enhances diversity on four related dimensions, namely global coverage, local coverage, novelty, and redundancy. The proposed solution is designed to diversify users profiles......, modeled on categorical preferences, within the same group in the recommendation filtering. We evaluate our approach on the Movielens dataset and show that our algorithm yields better results compared to random selection distant neighbors and performs comparably to one of the current state of the art...

Hospital information system: reusability, designing, modelling, recommendations for implementing.

Science.gov (United States)

Huet, B

1998-01-01

The aims of this paper are to precise some essential conditions for building reuse models for hospital information systems (HIS) and to present an application for hospital clinical laboratories. Reusability is a general trend in software, however reuse can involve a more or less part of design, classes, programs; consequently, a project involving reusability must be precisely defined. In the introduction it is seen trends in software, the stakes of reuse models for HIS and the special use case constituted with a HIS. The main three parts of this paper are: 1) Designing a reuse model (which objects are common to several information systems?) 2) A reuse model for hospital clinical laboratories (a genspec object model is presented for all laboratories: biochemistry, bacteriology, parasitology, pharmacology, ...) 3) Recommendations for generating plug-compatible software components (a reuse model can be implemented as a framework, concrete factors that increase reusability are presented). In conclusion reusability is a subtle exercise of which project must be previously and carefully defined.

Design, construction and operation features of high-rise structures

Science.gov (United States)

Mylnik, Alexey; Mylnik, Vladimir; Zubeeva, Elena; Mukhamedzhanova, Olga

2018-03-01

The article considers design, construction and operation features of high-rise facilities. The analysis of various situations, that come from improper designing, construction and operation of unique facilities, is carried out. The integrated approach is suggested, when the problems of choosing acceptable constructional solutions related to the functional purpose, architectural solutions, methods of manufacturing and installation, operating conditions for unique buildings and structures are being tackled. A number of main causes for the emergency destruction of objects under construction and operation is considered. A number of measures are proposed on the basis of factor classification in order to efficiently prevent the situations, when various negative options of design loads and emergency impacts occur.

Comparing infants' use of featural and spatiotemporal information when individuating objects in an event monitoring design

DEFF Research Database (Denmark)

Krøjgaard, Peter

. The results obtained using this design reveal that infants are more successful using spatiotemporal object information than when using featural information. However, recent studies using the less cognitively demanding event monitoring design have revealed that even younger infants are capable of object...... in the present series of experiments in which infants' use of spatiotemporal and featural information is compared directly using the less demanding event monitoring design. The results are discussed in relation to existing empirical evidence......., to what extent infants rely on spatiotemporal or featural object information when individuating objects is currently under debate. Hitherto, infants' use of spatiotemporal and featural object information has only been compared directly using the rather cognitively demanding event mapping design...

Dental Implant Macro-Design Features Can Impact the Dynamics of Osseointegration.

Science.gov (United States)

Vivan Cardoso, Marcio; Vandamme, Katleen; Chaudhari, Amol; De Rycker, Judith; Van Meerbeek, Bart; Naert, Ignace; Duyck, Joke

2015-08-01

The purpose of this study was to compare the clinical performance of two dental implant types possessing a different macro-design in the in vivo pig model. Titanium Aadva(TM) implants (GC, Tokyo, Japan) were compared with OsseoSpeed(TM) implants (Astra, Mölndal, Sweden), with the Aadva implant displaying significant larger inter-thread dimensions than the OsseoSpeed implant. Implants were installed in the parietal bone of 12 domestic pigs and left for healing for either 1 or 3 months. Implant osseointegration was evaluated by quantitative histology (bone volume relative to the tissue volume [BV/TV]; bone-to-implant contact [BIC]) for distinct implant regions (collar, body, total implant length) with specific implant thread features. The Wilcoxon-Mann-Whitney nonparametric test with α = 0.05 was performed. An inferior amount of bone enveloping the Aadva implant compared with the OsseoSpeed implant was observed, in particular at the implant body part with its considerable inter-thread gaps (p macro-design negatively affected the amount of bone in direct contact with the implant for this specific implant part (p implant osseointegration at the initial healing stage (total implant length; 1-month healing; p implant displayed a clinically acceptable level of osseointegration, the findings demonstrate that implant macro-design features can impact the dynamics of implant osseointegration. Consideration of specific implant macro-design features should be made relative to the biological and mechanical microenvironment. © 2013 Wiley Periodicals, Inc.

Cigarette Design Features: Effects on Emission Levels, User Perception, and Behavior.

Science.gov (United States)

Talhout, Reinskje; Richter, Patricia A; Stepanov, Irina; Watson, Christina V; Watson, Clifford H

2018-01-01

This paper describes the effects of non-tobacco, physical cigarette design features on smoke emissions, product appeal, and smoking behaviors - 3 factors that determine smoker's exposure and related health risks. We reviewed available evidence for the impact of filter ventilation, new filter types, and cigarettes dimensions on toxic emissions, smoker's perceptions, and behavior. For evidence sources we used scientific literature and websites providing product characteristics and marketing information. Whereas filter ventilation results in lower machine-generated emissions, it also leads to perceptions of lighter taste and relative safety in smokers who can unwittingly employ more intense smoking behavior to obtain the desired amount of nicotine and sensory appeal. Filter additives that modify smoke emissions can also modify sensory cues, resulting in changes in smoking behavior. Flavor capsules increase the cigarette's appeal and novelty, and lead to misperceptions of reduced harm. Slim cigarettes have lower yields of some smoke emissions, but smoking behavior can be more intense than with standard cigarettes. Physical design features significantly impact machine-measured emission yields in cigarette smoke, product appeal, smoking behaviors, and exposures in smokers. The influence of current and emerging design features is important in understanding the effectiveness of regulatory actions to reduce smoking-related harm.

Safety Analysis for Key Design Features of KALIMER-600 Design Concept

Energy Technology Data Exchange (ETDEWEB)

Lee, Yong Bum; Kwon, Y. M.; Kim, E. K.; Suk, S. D.; Chang, W. P.; Jeong, H. Y.; Ha, K. S

2007-02-15

This report contains the safety analyses of the KALIMER-600 conceptual design which KAERI has been developing under the Long-term Nuclear R and D Program. The analyses have been performed reflecting the design developments during the second year of the 4th design phase in the program. The specific presentations are the key design features with the safety principles for achieving the safety objectives, the event categorization and safety criteria, and results on the safety analyses for the DBAs and ATWS events, the containment performance, and the channel blockages. The safety analyses for both the DBAs and ATWS events have been performed using SSC-K version 1.3., and the results have shown the fulfillment of the safety criteria for DBAs with conservative assumptions. The safety margins as well as the inherent safety also have been confirmed for the ATWS events. For the containment performance analysis, ORIGEN-2.1 and CONTAIN-LMR have been used. In results, the structural integrity has been acceptable and the evaluated exposure dose rate has been complied with 10 CFR 100 and PAG limits. The analysis results for flow blockages of 6-subchannels, 24-subchannels, and 54- subchannels with the MATRA-LMR-FB code, have assured the integrity of subassemblies.

Mutagenicity of smoke condensates from Canadian cigarettes with different design features.

Science.gov (United States)

Mladjenovic, Nemanja; Maertens, Rebecca M; White, Paul A; Soo, Evelyn C

2014-01-01

There is currently limited knowledge regarding the impact of different cigarette designs on the toxicological properties of cigarette smoke condensate (CSC). This study used the Salmonella Mutagenicity Assay to examine the mutagenic activity of mainstream CSCs from 11 commercial Canadian cigarette brands with different design features or tobacco blend. The brands were selected to include design features that are common for cigarettes sold in the Canadian market, as well as cigarettes with alternate filters (charcoal or MicroBlue™), the super slim design, and cigarettes containing mixed blends of different tobacco types. CSCs were obtained using the International Organization for Standardization (ISO) and Health Canada Intense (HCI) smoking regimes, and mutagenic activity was assessed using Salmonella strains TA98, YG1041 and YG5185. Comparisons of the commercial brands to the Kentucky 3R4F, the Canadian Monitor 8 reference and a Canadian best seller revealed no significant reduction in CSC mutagenicity for cigarettes with alternate filters. However, the super slim design did afford some reduction in mutagenic potency. Nevertheless, since the study did not attempt to evaluate the impact of the cigarette designs on human health at the individual or population level, the super slim cigarettes cannot be considered 'reduced-harm' cigarettes.

Important conventional island design features: generators

International Nuclear Information System (INIS)

Fritsch, Th.

1985-01-01

To-day, maximum reactor capacity is setting a provisional limit to the MW race. The latest nuclear generators in manufacturing are rated 1530 MW - 1710 MVA and are doubtless the most powerful ones in the world. The target to be aimed at in designing large turbogenerators may be defined by the following points: 1) meeting the rated load conditions without overpassing maximum admissible temperatures in any part of the machine; 2) keeping losses as small as possible; 3) keeping overall size small enough to allow rail transportation from the works to the site; 4) choosing well experienced solutions in order to set a highly reliable machine with maximum maintenance. In this report the main features of nuclear generators in the 1000-2000 MVA range are described. (Auth.)

Essential Features for a Scholarly Journal Content Management and Peer Review Software

Directory of Open Access Journals (Sweden)

Fatima Sheikh Shoaie

2010-03-01

Full Text Available   The present study investigates the software used in scientific journals for content management and peer review, in order to identify the essential features. These softwares are analyzed and presented in tabular format. A questionnaire was prepared and submitted to a panel composed of 15 referees, editor in chief, software designers and researchers. The essential features for a software managing the review process were divided into three groups with populations of 10-15, 5-10 and 0-5 respectively. The majority of peer review process software features, in view of panelists, fell into a group of features with a population of 10-15. Finally it should be said that the features represented by the first group must be taken into account when designing or purchasing a peer review software. The second tier features (with population of 5-10 are recommended given journal's status and capabilities. The third tier features were altogether discounted due to low population

Design of the Control System for Engineered Safety Features of KIJANG Research Reactor

International Nuclear Information System (INIS)

Kim, Hagtae; Kim, Jun-Yeon; Chae, Hee-Taek

2015-01-01

The purpose of this paper is to design an effective control system for the Engineered Safety Features (ESF) of KJRR such as the Safety Residual Heat Removal System (SRHRS) pumps and Siphon Break Valve (SBV) without an Engineered Safety Features-Component Control System (ESF-CCS). This control system is called a 'local motor starter', because this system controls motors in the SRHRS pumps and SBVs by receiving the signal from Reactor Protection System (RPS) and Alternate Protection System (APS) when the differential pressure or pool level reach the set points. In this paper, the design concepts and requirements of the local motor starter based on the design features of KJRR is proposed. An ESF is a safety system that mitigates consequences of the Anticipated Operational Occurrence (AOO) and Design Basis Accident (DBA). The results of this paper are able to be used for the development of control systems for research reactors similar to KJRR. The precondition for such application is to have a few ESFs and conduct simple logic. The proposed control system called a local motor starter is being designed, and a manufacture of the actual systems is expected in the foreseeable future

A regression-based Kansei engineering system based on form feature lines for product form design

Directory of Open Access Journals (Sweden)

Yan Xiong

2016-06-01

Full Text Available When developing new products, it is important for a designer to understand users’ perceptions and develop product form with the corresponding perceptions. In order to establish the mapping between users’ perceptions and product design features effectively, in this study, we presented a regression-based Kansei engineering system based on form feature lines for product form design. First according to the characteristics of design concept representation, product form features–product form feature lines were defined. Second, Kansei words were chosen to describe image perceptions toward product samples. Then, multiple linear regression and support vector regression were used to construct the models, respectively, that predicted users’ image perceptions. Using mobile phones as experimental samples, Kansei prediction models were established based on the front view form feature lines of the samples. From the experimental results, these two predict models were of good adaptability. But in contrast to multiple linear regression, the predict performance of support vector regression model was better, and support vector regression is more suitable for form regression prediction. The results of the case showed that the proposed method provided an effective means for designers to manipulate product features as a whole, and it can optimize Kansei model and improve practical values.

OARSI Clinical Trials Recommendations

DEFF Research Database (Denmark)

McAlindon, T. E.; Driban, J. B.; Henrotin, Y.

2015-01-01

The goal of this document is to update the original OARSI recommendations specifically for the design, conduct, and reporting of clinical trials that target symptom or structure modification among individuals with knee osteoarthritis (OA). To develop recommendations for the design, conduct...

The design features and safety concepts of the nuclear heating reactor developed in China

International Nuclear Information System (INIS)

Zheng Wenxiang; Wang Dazhong

1995-01-01

Based on the specific conditions of the nuclear heat applications and the development objectives of the advanced reactors, the nuclear heating reactor (NHR) exploited in China has adhered to the new safety concepts and been designed with a number of advanced features, including the integrated arrangement, full power natural circulation capacity, self-pressurized performance, dynamically-hydraulic control rod drive and passive safety systems, so that higher standard of safety as well as simplification in the plant systems and improvement in economic viability has been achieved. This paper describes the special consideration in the design as well as the main design features and safety concepts of the NHR. Some experimental and analytical results are also presented to demonstrate the NHR safety features

Cigarette Design Features: Effects on Emission Levels, User Perception, and Behavior.

NARCIS (Netherlands)

Talhout, Reinskje; Richter, Patricia A; Stepanov, Irina; Watson, Christina V; Watson, Clifford H

This paper describes the effects of non-tobacco, physical cigarette design features on smoke emissions, product appeal, and smoking behaviors - 3 factors that determine smoker's exposure and related health risks.

Design recommendation to improve the energy efficiency in Hotel Moka, Las Terrazas

International Nuclear Information System (INIS)

Baldoquin, Natalí Collado; Rueda Guzmán, Luis Alberto; Pérez Vallina, Javier

2017-01-01

Tourist facilities are now major energy consumers, which leads to the well-known economic and environmental consequences. The Hotel Moka, in the community Las Terrazas, from its conception have stood out for trying to integrate to the nature and to avoid a high environmental impact. However, after more than two decades of creation, potentialities are identified to improve energy performance from architectural design, as well as technological changes and use of renewable sources of photovoltaic solar energy. In this paper, the main design factors that influence energy consumption are evaluated. It presents recommendations and design strategies that could improve the energy performance of the building from an integral approach achieving significant energy savings and cover about 20% from photovoltaic solar panels. (author)

System 80+ design features for severe accident prevention and mitigation

International Nuclear Information System (INIS)

Jacob, M.C.; Schneider, R.E.; Finnicum, D.J.

1993-01-01

ABB-CE, in cooperation with the US Department of Energy, is working to develop and certify the System 80+ design, which is ABB-CE's standardized evolutionary Advanced Light Water Reactor (ALWR) design. It incorporates design enhancements based on Probabilistic Risk Assessment (PRA) insights, guidance from the EPRI's Utility Requirements Document, and US NRC's Severe Accident Policy. Major severe accident prevention and mitigation design features of the system is discussed along with its conformance to EPRI URD guidance, as applicable. Computer simulation of a best estimate severe accident scenario is presented to illustrate the acceptable containment performance of the design. It is concluded that by considering severe accident prevention and mitigation early in the design process, the System 80+ design represents a robust plant design that has low core damage frequencies, low containment conditional failure probabilities, and acceptable deterministic containment performance under severe accident conditions

Comparative effectiveness of instructional design features in simulation-based education: systematic review and meta-analysis.

Science.gov (United States)

Cook, David A; Hamstra, Stanley J; Brydges, Ryan; Zendejas, Benjamin; Szostek, Jason H; Wang, Amy T; Erwin, Patricia J; Hatala, Rose

2013-01-01

Although technology-enhanced simulation is increasingly used in health professions education, features of effective simulation-based instructional design remain uncertain. Evaluate the effectiveness of instructional design features through a systematic review of studies comparing different simulation-based interventions. We systematically searched MEDLINE, EMBASE, CINAHL, ERIC, PsycINFO, Scopus, key journals, and previous review bibliographies through May 2011. We included original research studies that compared one simulation intervention with another and involved health professions learners. Working in duplicate, we evaluated study quality and abstracted information on learners, outcomes, and instructional design features. We pooled results using random effects meta-analysis. From a pool of 10,903 articles we identified 289 eligible studies enrolling 18,971 trainees, including 208 randomized trials. Inconsistency was usually large (I2 > 50%). For skills outcomes, pooled effect sizes (positive numbers favoring the instructional design feature) were 0.68 for range of difficulty (20 studies; p simulation-based education.

The Design-to-Analysis Process at Sandia National Laboratories Observations and Recommendations; TOPICAL

International Nuclear Information System (INIS)

BURNS, SHAWN P.; HARRISON, RANDY J.; DOBRANICH, DEAN

2001-01-01

The efficiency of the design-to-analysis process for translating solid-model-based design data to computational analysis model data plays a central role in the application of computational analysis to engineering design and certification. A review of the literature from within Sandia as well as from industry shows that the design-to-analysis process involves a number of complex organizational and technological issues. This study focuses on the design-to-analysis process from a business process standpoint and is intended to generate discussion regarding this important issue. Observations obtained from Sandia staff member and management interviews suggest that the current Sandia design-to-analysis process is not mature and that this cross-organizational issue requires committed high-level ownership. A key recommendation of the study is that additional resources should be provided to the computer aided design organizations to support design-to-analysis. A robust community of practice is also needed to continuously improve the design-to-analysis process and to provide a corporate perspective

Design features to facilitate IAEA safeguards at light water reactors

International Nuclear Information System (INIS)

Pasternak, T.; Glancy, J.; Goldman, L.; Swartz, J.

1981-01-01

Several studies have been performed recently to identify and analyze light water reactor (LWR) features that, if incorporated into the facility design, would facilitate the implementation of International Atomic Energy Agency (IAEA) safeguards. This paper presents results and conclusions of these studies. 2 refs

Guidelines for sustainable building design: Recommendations from the Presidio of San Francisco energy efficiency design charrette

Energy Technology Data Exchange (ETDEWEB)

Brown, K.; Sartor, D.; Greenberg, S. [and others

1996-05-01

In 1994, the Bay Chapter of the Association of Energy Engineers{reg_sign} organized a two-day design charrette for energy-efficient redevelopment of buildings by the National Park Services (NPS) at the Presidio of San Francisco. This event brought together engineers, researchers, architects, government officials, and students in a participatory environment to apply their experience to create guidelines for the sustainable redesign of Presidio buildings. The venue for the charrette was a representative barracks building located at the Main Post of the Presidio. Examination of this building allowed for the development of design recommendations, both for the building and for the remainder of the facilities. The charrette was organized into a committee structure consisting of: steering, measurement and monitoring, modeling, building envelope and historic preservation (architectural), HVAC and controls, lighting, and presentation. Prior to the charrette itself, the modeling and measurement/monitoring committees developed substantial baseline data for the other committees during the charrette. An integrated design approach was initiated through interaction between the committees during the charrette. Later, committee reports were cross-referenced to emphasize whole building design and systems integration.

Influence of design features on decommissioning of a large fast breeder reactor

International Nuclear Information System (INIS)

Fournie, J.-L.; Alary, C.; Maire, D.; Seroux, N. de; Peyrard, G.

1990-01-01

The evolution of FBR design in Europe shows that pool-type design will become the reference design for future FBR and the projected European Fast Reactor (EFR) is based on this concept. The identification of design features shows that the main contributors of the sodium and structures activity are the Co60 for gamma radiation source and low decay, Ni63, Nb94 and Ni59 for long time decay. So, the technical benefits of a Co content reduction are interesting for the high activated structures and for diagrid thimbles coating and we made proposals to lower Co content in steels or alloys and to substitute coatings. We identify measures which must facilitate both the sodium draining and the reactor block and internal cleaning: all which improve the gravity draining and the downing of the sodium flow make easier the penetration of cleaning products. The features, connected with the dismantling of the very activated internal structures, of the roof and of the lay-out, are mentioned. (author)

User-Centered Design for Developing Interventions to Improve Clinician Recommendation of Human Papillomavirus Vaccination.

Science.gov (United States)

Henninger, Michelle L; Mcmullen, Carmit K; Firemark, Alison J; Naleway, Allison L; Henrikson, Nora B; Turcotte, Joseph A

2017-01-01

Human papillomavirus (HPV) is the most common sexually transmitted infection in the US and is associated with multiple types of cancer. Although effective HPV vaccines have been available since 2006, coverage rates in the US remain much lower than with other adolescent vaccinations. Prior research has shown that a strong recommendation from a clinician is a critical determinant in HPV vaccine uptake and coverage. However, few published studies to date have specifically addressed the issue of helping clinicians communicate more effectively with their patients about the HPV vaccine. To develop one or more novel interventions for helping clinicians make strong and effective recommendations for HPV vaccination. Using principles of user-centered design, we conducted qualitative interviews, interviews with persons from analogous industries, and a data synthesis workshop with multiple stakeholders. Five potential intervention strategies targeted at health care clinicians, youth, and their parents were developed. The two most popular choices to pursue were a values-based communication strategy and a puberty education workbook. User-centered design is a useful strategy for developing potential interventions to improve the rate and success of clinicians recommending the HPV vaccine. Further research is needed to test the effectiveness and acceptability of these interventions in clinical settings.

An ontology design pattern for surface water features

Science.gov (United States)

Sinha, Gaurav; Mark, David; Kolas, Dave; Varanka, Dalia; Romero, Boleslo E.; Feng, Chen-Chieh; Usery, E. Lynn; Liebermann, Joshua; Sorokine, Alexandre

2014-01-01

Surface water is a primary concept of human experience but concepts are captured in cultures and languages in many different ways. Still, many commonalities exist due to the physical basis of many of the properties and categories. An abstract ontology of surface water features based only on those physical properties of landscape features has the best potential for serving as a foundational domain ontology for other more context-dependent ontologies. The Surface Water ontology design pattern was developed both for domain knowledge distillation and to serve as a conceptual building-block for more complex or specialized surface water ontologies. A fundamental distinction is made in this ontology between landscape features that act as containers (e.g., stream channels, basins) and the bodies of water (e.g., rivers, lakes) that occupy those containers. Concave (container) landforms semantics are specified in a Dry module and the semantics of contained bodies of water in a Wet module. The pattern is implemented in OWL, but Description Logic axioms and a detailed explanation is provided in this paper. The OWL ontology will be an important contribution to Semantic Web vocabulary for annotating surface water feature datasets. Also provided is a discussion of why there is a need to complement the pattern with other ontologies, especially the previously developed Surface Network pattern. Finally, the practical value of the pattern in semantic querying of surface water datasets is illustrated through an annotated geospatial dataset and sample queries using the classes of the Surface Water pattern.

An Ontology Design Pattern for Surface Water Features

Energy Technology Data Exchange (ETDEWEB)

Sinha, Gaurav [Ohio University; Mark, David [University at Buffalo (SUNY); Kolas, Dave [Raytheon BBN Technologies; Varanka, Dalia [U.S. Geological Survey, Rolla, MO; Romero, Boleslo E [University of California, Santa Barbara; Feng, Chen-Chieh [National University of Singapore; Usery, Lynn [U.S. Geological Survey, Rolla, MO; Liebermann, Joshua [Tumbling Walls, LLC; Sorokine, Alexandre [ORNL

2014-01-01

Surface water is a primary concept of human experience but concepts are captured in cultures and languages in many different ways. Still, many commonalities can be found due to the physical basis of many of the properties and categories. An abstract ontology of surface water features based only on those physical properties of landscape features has the best potential for serving as a foundational domain ontology. It can then be used to systematically incor-porate concepts that are specific to a culture, language, or scientific domain. The Surface Water ontology design pattern was developed both for domain knowledge distillation and to serve as a conceptual building-block for more complex surface water ontologies. A fundamental distinction is made in this on-tology between landscape features that act as containers (e.g., stream channels, basins) and the bodies of water (e.g., rivers, lakes) that occupy those containers. Concave (container) landforms semantics are specified in a Dry module and the semantics of contained bodies of water in a Wet module. The pattern is imple-mented in OWL, but Description Logic axioms and a detailed explanation is provided. The OWL ontology will be an important contribution to Semantic Web vocabulary for annotating surface water feature datasets. A discussion about why there is a need to complement the pattern with other ontologies, es-pecially the previously developed Surface Network pattern is also provided. Fi-nally, the practical value of the pattern in semantic querying of surface water datasets is illustrated through a few queries and annotated geospatial datasets.

Space Station services and design features for users

Science.gov (United States)

Kurzhals, Peter R.; Mckinney, Royce L.

1987-01-01

The operational design features and services planned for the NASA Space Station will furnish, in addition to novel opportunities and facilities, lower costs through interface standardization and automation and faster access by means of computer-aided integration and control processes. By furnishing a basis for large-scale space exploitation, the Space Station will possess industrial production and operational services capabilities that may be used by the private sector for commercial ventures; it could also ultimately support lunar and planetary exploration spacecraft assembly and launch facilities.

Gradually including potential users: A tool to counter design exclusions.

Science.gov (United States)

Zitkus, Emilene; Langdon, Patrick; Clarkson, P John

2018-01-01

The paper describes an iterative development process used to understand the suitability of different inclusive design evaluation tools applied into design practices. At the end of this process, a tool named Inclusive Design Advisor was developed, combining data related to design features of small appliances with ergonomic task demands, anthropometric data and exclusion data. When auditing a new design the tool examines the exclusion that each design feature can cause, followed by objective recommendations directly related to its features. Interactively, it allows designers or clients to balance design changes with the exclusion caused. It presents the type of information that enables designers and clients to discuss user needs and make more inclusive design decisions. Copyright © 2017. Published by Elsevier Ltd.

Emergent features and perceptual objects: re-examining fundamental principles in analogical display design.

Science.gov (United States)

Holt, Jerred; Bennett, Kevin B; Flach, John M

2015-01-01

Two sets of design principles for analogical visual displays, based on the concepts of emergent features and perceptual objects, are described. An interpretation of previous empirical findings for three displays (bar graph, polar graphic, alphanumeric) is provided from both perspectives. A fourth display (configural coordinate) was designed using principles of ecological interface design (i.e. direct perception). An experiment was conducted to evaluate performance (accuracy and latency of state identification) with these four displays. Numerous significant effects were obtained and a clear rank ordering of performance emerged (from best to worst): configural coordinate, bar graph, alphanumeric and polar graphic. These findings are consistent with principles of design based on emergent features; they are inconsistent with principles based on perceptual objects. Some limitations of the configural coordinate display are discussed and a redesign is provided. Practitioner Summary: Principles of ecological interface design, which emphasise the quality of very specific mappings between domain, display and observer constraints, are described; these principles are applicable to the design of all analogical graphical displays.

Design features of Advanced Power Reactor (APR) 1400 steam generator

International Nuclear Information System (INIS)

Park, Tae-Jung; Park, Jun-Soo; Kim, Moo-Yong

2004-01-01

Advanced Power Reactor 1400 (APR 1400) which is to achieve the improvement of the safety and economical efficiency has been developed by Korea Hydro and Nuclear Power Co., Ltd. (KHNP) with the support from industries and research institutes. The steam generator for APR 1400 is an evolutionary type from System 80 + , which is the recirculating U-tube heat exchanger with integral economizer. Compared to the System 80 + steam generator, it is focused on the improved design features, operating and design conditions of APR 1400 steam generator. Especially, from the operation experience of Korean Standard Nuclear Power Plant (KSNP) steam generator, the lessons-learned measures are incorporated to prevent the tube wear caused by flow-induced vibration (FIV). The concepts for the preventive design features against FIV are categorized to two fields; flow distribution and dynamic response characteristics. From the standpoint of flow distribution characteristics, the egg-crate flow distribution plate (EFDP) is installed to prevent the local excessive flow loaded on the most susceptible tube to wear. The parametric study is performed to select the optimum design with the efficient mitigation of local excessive flow. ATHOS3 Mod-01 is used and partly modified to analyze the flow field of the APR 1400 steam generator. In addition, the upper tube bundle support is designed to eliminate the presence of tube with a low natural frequency. Based on the improved upper tube bundle support, the modal analysis is performed and compared with that of System 80 + . Using the results of flow distribution and modal analysis, the two mechanisms of flow-induced vibration are investigated; fluid-elastic instability (FEI) and random turbulence excitation (RTE). (authors)

Design features of HTMR-hybrid toroidal magnet tokamak reactor

International Nuclear Information System (INIS)

Rosatelli, F.; Avanzini, P.G.; Derchi, D.; Magnasco, M.; Grattarola, M.; Peluffo, M.; Raia, G.; Brunelli, B.; Zampaglione, V.

1984-01-01

The HTMR (Hybrid Toroidal Magnet Tokamak Reactor) conceptual design is aimed to demonstrate the feasibility of a Tokamak reactor which could fulfil the scientific and technological objectives expected from next generation devices with size and costs as small as possible. A hybrid toroidal field magnet, made up by copper and superconducting coils, seems to be a promising solution, allowing a considerable flexibility in machine performances, so as to gain useful margins in front of the uncertainties in confinement time scaling laws and beta and plasma density limits. The optimization procedure for the hybrid magnet, configuration, the main design features of HTMR and the preliminary mechanical calculations of the superconducting toroidal coils are described. (author)

FFTF in-containment cell liner design and installation experience

International Nuclear Information System (INIS)

Umek, A.M.; Swenson, L.D.

1980-01-01

Design features and liner construction techniques are discussed. Cell leak-rate tests and the methods used to locate and repair leaks are described. A brief analysis of the overall experience at FFTF is provided, with recommendations for future plant designs

Wave kinematics and response of slender offshore structures. Vol 2: Recommendation for design

Energy Technology Data Exchange (ETDEWEB)

Ottesen Hansen, N.E.

1999-08-01

This memorandum comprises a design recommendation for slender structures exposed to wave and current loading in the sea. It is considered as an addendum to DS 499 or the DnV Classification Notes No. 30.5. Slender structures are structures as risers, well conductors, or structures with small diameter members which are dynamically amplified or liable to hydro-elastic vibrations such as vortex induced vibrations, self-excited vibrations and other dynamic phenomena. The newer type of steel platforms have a large number of these members attached to them. The present guideline is motivated by a number of failures of conductors. Some failures took place during drilling are were caused by fatigue which developed due to hydroelastic vibrations. Other failures have been caused by clamped conductors due to strong wave forces. The recommendations are based on full scale field measurements of waves and currents and of instrumented pipes in the North Sea both for high and for low Keulegan-Carpenter numbers. The measurements have been made under realistic storm conditions, which means that the recommendations are fully verified. (au)

Assessing Cognitive Function in Bipolar Disorder: Challenges and Recommendations for Clinical Trial Design

Science.gov (United States)

Burdick, Katherine E.; Ketter, Terence A.; Goldberg, Joseph F.; Calabrese, Joseph R.

2015-01-01

OBJECTIVE Neurocognitive impairment in schizophrenia has been recognized for more than a century. In contrast, only recently have significant neurocognitive deficits been recognized in bipolar disorder. Converging data suggest the importance of cognitive problems in relation to quality of life in bipolar disorder, highlighting the need for treatment and prevention efforts targeting cognition in bipolar patients. Future treatment trials targeting cognitive deficits will be met with methodological challenges due to the inherent complexity and heterogeneity of the disorder, including significant diagnostic comorbidities, the episodic nature of the illness, frequent use of polypharmacy, cognitive heterogeneity, and a lack of consensus regarding measurement of cognition and outcome in bipolar patients. Guidelines for use in designing future trials are needed. PARTICIPANTS The members of the consensus panel (each of the bylined authors) were selected based upon their expertise in bipolar disorder. Dr. Burdick is a neuropsychologist who has studied cognition in this illness for 15 years; Drs. Ketter, Calabrese, and Goldberg each bring considerable expertise in the treatment of bipolar disorder both within and outside of controlled clinical trials. This consensus statement was derived from work together at scientific meetings (e.g. symposium presention at the 2014 Annual meeting of the American Society of Clinical Psychopharmacology, among others) and ongoing discussions by conference call. With the exception of the public presentations on this topic, these meetings were closed to outside participants. EVIDENCE A literature review was undertaken by the authors to identify illness-specific challenges relevant to the design and conduct of treatment trials targeting neurocognition in bipolar disorder. Expert opinion from each of the authors guided the consensus recommendations. CONSENSUS PROCESS Consensus recommendations, reached by unanimous opinion of the authors, are

MOS integrated circuit design

CERN Document Server

Wolfendale, E

2013-01-01

MOS Integral Circuit Design aims to help in the design of integrated circuits, especially large-scale ones, using MOS Technology through teaching of techniques, practical applications, and examples. The book covers topics such as design equation and process parameters; MOS static and dynamic circuits; logic design techniques, system partitioning, and layout techniques. Also featured are computer aids such as logic simulation and mask layout, as well as examples on simple MOS design. The text is recommended for electrical engineers who would like to know how to use MOS for integral circuit desi

Using the Context of User Feedback in Recommender Systems

Directory of Open Access Journals (Sweden)

Ladislav Peska

2016-12-01

Full Text Available Our work is generally focused on recommending for small or medium-sized e-commerce portals, where explicit feedback is absent and thus the usage of implicit feedback is necessary. Nonetheless, for some implicit feedback features, the presentation context may be of high importance. In this paper, we present a model of relevant contextual features affecting user feedback, propose methods leveraging those features, publish a dataset of real e-commerce users containing multiple user feedback indicators as well as its context and finally present results of purchase prediction and recommendation experiments. Off-line experiments with real users of a Czech travel agency website corroborated the importance of leveraging presentation context in both purchase prediction and recommendation tasks.

Recommendations for codes and standards to be used for design and fabrication of high level waste canister

International Nuclear Information System (INIS)

Bermingham, A.J.; Booker, R.J.; Booth, H.R.; Ruehle, W.G.; Shevekov, S.; Silvester, A.G.; Tagart, S.W.; Thomas, J.A.; West, R.G.

1978-01-01

This study identifies codes, standards, and regulatory requirements for developing design criteria for high-level waste (HLW) canisters for commercial operation. It has been determined that the canister should be designed as a pressure vessel without provision for any overpressure protection type devices. It is recommended that the HLW canister be designed and fabricated to the requirements of the ASME Section III Code, Division 1 rules, for Code Class 3 components. Identification of other applicable industry and regulatory guides and standards are provided in this report. Requirements for the Design Specification are found in the ASME Section III Code. It is recommended that design verification be conducted principally with prototype testing which will encompass normal and accident service conditions during all phases of the canister life. Adequacy of existing quality assurance and licensing standards for the canister was investigated. One of the recommendations derived from this study is a requirement that the canister be N stamped. In addition, acceptance standards for the HLW waste should be established and the waste qualified to those standards before the canister is sealed. A preliminary investigation of use of an overpack for the canister has been made, and it is concluded that the use of an overpack, as an integral part of overall canister design, is undesirable, both from a design and economics standpoint. However, use of shipping cask liners and overpack type containers at the Federal repository may make the canister and HLW management safer and more cost effective. There are several possible concepts for canister closure design. These concepts can be adapted to the canister with or without an overpack. A remote seal weld closure is considered to be one of the most suitable closure methods; however, mechanical seals should also be investigated

DNV launches new recommended practice for design of subsea equipment

Energy Technology Data Exchange (ETDEWEB)

Toerstad, Elisabeth Heggelund

2005-07-01

The application of modern corrosion-resistant alloys to subsea pipelines and components has led to serious problems of hydrogen embrittlement from the corrosion protection system, resulting in cracks and leaks. The most commonly known incidents of this kind are the duplex hubs on Voinhaven, UK and Garn West and the 13% Cr pipelines on Tune and Aasgard, all at the Norwegian shelf. Understanding the nature of this problem has called for a broad multidisciplinary approach, involving expertise on corrosion and metallurgy as well as structural design and integrity. Competence in probabilistic analyses and risk assessments has also been necessary in order to set acceptance criteria and evaluate probability of failure for existing installations. (Det Norske Veritas (DNV) is now about to issues a Recommended Practise (RP) for design of subsea equipment in duplex steels under Cathodic Protection. The RP is based on knowledge gained through failure investigations, qualification pr grams and research work, and a broad industry consortium has contributed with experience and knowledge. Hydrogen Induced Stress Cracking (HISC) due to hydrogen from the Cathodic Protection (CP) system has been one of the most frequent and costly failure modes for subsea equipment and pipelines in the North Sea over the recent years. Today, the international oil business is looking to Norway for assistance in establishing detailed knowledge about and preventive measures against this failure mode. A significant research work is currently being carried out jointly by DNV, SINTEF and TWI (The Welding Institute), supported by a broad industry consortium - aiming at a better understanding of the HISC (Hydrogen Induced Stress Cracking) mechanism and establishment of test methods which reflect the sensitivity to cracking. DNV has also established a Recommended Practice, which will be issued late 2005. It reflects the experience gained from the failure examinations, fitness for purpose evaluations, research

Designing Dietary Recommendations Using System Level Interactomics Analysis and Network-Based Inference

Directory of Open Access Journals (Sweden)

Tingting Zheng

2017-09-01

diet in disease development. Due to the complexity of analyzing the food composition and eating patterns of individuals our in silico analysis, using large-scale gene expression datasets and network-based topological features, may serve as a proof-of-concept in nutritional systems biology for identifying diet-disease relationships and subsequently designing dietary recommendations.

Design features for enhancing international safeguards of AFR dry storage for spent LWR fuel

International Nuclear Information System (INIS)

Roberts, F.P.; Harms, N.L.

1985-05-01

The Pacific Northwest Laboratory has performed a study for the Nuclear Regulatory Commission to identify and analyze design features that can facilitate the implementation of IAEA safeguards at facilities for dry storage of light water reactor spent fuels. Specific design features are identified that can enhance nuclear material flow and inventory verification. These are assessed from the viewpoint of safeguards effectiveness and possible impacts on the IAEA and the operator of the AFR facility. 11 refs., 3 figs., 2 tabs

Recommendations to designers aimed at minimizing radiation dose incurred in operation, maintenance, inspection and repair of light-water reactors

International Nuclear Information System (INIS)

1978-01-01

In the framework of the exchange of experience between nuclear power plant operators organized by the services of the Commission of the European Communities an ad-hoc working party elaborated recommendations particularly directed to those concerned with design of light water reactor plants. The necessary design measures which should be followed to minimize radiation dose incurred in operation, maintenance, inspection and repair of such reactors are listed. The recommendations are based on recent views expressed by operating utilities within the Community. It is intended to revise these recommendations at suitable intervals in order to make use of the most recent experience and to keep the report up to date with the actual state of art in nuclear technology

Analysis and design recommendation on rabbeted capping plate of equipment cell in nuclear chemical facility

International Nuclear Information System (INIS)

Zhang Jingyu; Yin Xiaozhan

2013-01-01

Rabbeted capping plates are widely used in the roof of equipment cells in order to meet the requirements of nuclear radiation protection. The key considerations in the design include vertical load, seismic load and repair load. This article establishes T shaped and Z-shaped plate model via FEM software (ANSYS), analyzes the bearing capacity and displacement distribution in different load cases, and provides recommendations to the design and construction accordingly. (authors)

NASA Education Recommendation Report - Education Design Team 2011

Science.gov (United States)

Pengra, Trish; Stofan, James

2011-01-01

NASA people are passionate about their work. NASA's missions are exciting to learners of all ages. And since its creation in 1958, NASA's people have been passionate about sharing their inspiring discoveries, research and exploration with students and educators. In May 2010, NASA administration chartered an Education Design Team composed of 12 members chosen from the Office of Education, NASA's Mission Directorates and Centers for their depth of knowledge and education expertise, and directed them to evaluate the Agency's program in the context of current trends in education. By improving NASA's educational offerings, he was confident that the Agency can play a leading role in inspiring student interest in science, technology, engineering and mathematics (STEM) as few other organizations can. Through its unique workforce, facilities, research and innovations, NASA can expand its efforts to engage underserved and underrepresented communities in science and mathematics. Through the Agency's STEM education efforts and science and exploration missions, NASA can help the United States successfully compete, prosper and be secure in the 21st century global community. After several months of intense effort, including meeting with education experts; reviewing Administration policies, congressional direction and education research; and seeking input from those passionate about education at NASA, the Education Design Team made six recommendations to improve the impact of NASA's Education Program: (1) Focus the NASA Education Program to improve its impact on areas of greatest national need (2) Identify and strategically manage NASA Education partnerships (3) Participate in National and State STEM Education policy discussions (4) Establish a structure to allow the Office of Education, Centers and Mission Directorates to implement a strategically integrated portfolio (5) Expand the charter of the Education Coordinating Committee to enable deliberate Education Program design (6

Interactive Universal Design Kiosks: Explanations About Social Inclusion Features in Architectural Design.

Science.gov (United States)

Guimarães, Marcelo Pinto; Picceli, Angélica Fátima Baldin; Sabino, Paulo Roberto

2016-01-01

This paper details a set of self-supporting and illuminated panels that work together but independently in order to emphasize the explanation of building features and activities that are based on Universal Design guidelines. The exhibition is based on two structures that are arranged in semi-circles (A and B). They are integrated to form a carpeted path where the visitor will be gradually exposed to the concepts related to the principles of Universal Design. Following the sequence of three-dimensional objects and swivelling box elements that support the tactile information on the subject, it is expected that visitors become familiar with each of the principles being demonstrated. Operated by a control system consisting of keys with colour signage, textures and high relief, the panel on the control table allows the user to choose information about paired relationships between some of seven principles contained in printed images about the architectural design on the set of panels. The effectiveness of the composition can be verified by the time people remain enough to hear, see and touch the kiosks for all the information, or by successive visits users make to the setting.

Accommodation of unprotected accidents by inherent safety design features in metallic and oxide-fueled LMFBRs

International Nuclear Information System (INIS)

Cahalan, J.E.; Sevy, R.H.; Su, S.F.

1985-01-01

This paper presents the results of a study of the effectivness of intrinsic design features to mitigate the consequences of unprotected accidents in metallic and oxide-fueled LMFBRs. The accidents analyzed belong to the class generally considered to lead to core disruption; unprotected loss-of-flow (LOF) and transient over-power (TOP). Results of the study demonstrate the potential for design features to meliorate accident consequences, and in some cases to render them benign. Emphasis is placed on the relative performance of metallic and oxide-fueled core designs

Brownfields Waterfront Sustainability Pilot, Allentown PA: Technical Memorandum on Conceptual Design Using Low Impact Development

Science.gov (United States)

This technical memorandum briefly describes the site and the master plan, indicates design constraints considered, specifies recommended LID stormwater techniques and features for sustainable redevelopment of the site, and offers other recommendations.

A new design concept for offshore nuclear power plants with enhanced safety features

International Nuclear Information System (INIS)

Lee, Kihwan; Lee, Kang-Heon; Lee, Jeong Ik; Jeong, Yong Hoon; Lee, Phill-Seung

2013-01-01

Highlights: ► A new design concept for offshore nuclear power plants is proposed. ► The total general arrangement for the concept is suggested. ► A new emergency passive containment cooling system (EPCCS) is proposed. ► A new emergency passive reactor-vessel cooling system (EPRVCS) is proposed. ► Safety features against earthquakes, tsunamis, and storms are discussed. - Abstract: In this paper, we present a new concept for offshore nuclear power plants (ONPP) with enhanced safety features. The design concept of a nuclear power plant (NPP) mounted on gravity-based structures (GBSs), which are widely used offshore structures, is proposed first. To demonstrate the feasibility of the concept, a large-scale land-based nuclear power plant model APR1400, which is the most recent NPP model in the Republic of Korea, is mounted on a GBS while minimizing modification to the original features of APR1400. A new total general arrangement (GA) and basic design principles are proposed and can be directly applied to any existing land based large scale NPPs. The proposed concept will enhance the safety of a NPP due to several aspects. A new emergency passive containment cooling system (EPCCS) and emergency passive reactor-vessel cooling system (EPRVCS) are proposed; their features of using seawater as coolant and safety features against earthquakes, Tsunamis, storms, and marine collisions are also described. We believe that the proposed offshore nuclear power plant is more robust than conventional land-based nuclear power plants and it has strong potential to provide great opportunities in nuclear power industries by decoupling the site of construction and that of installation.

OARSI Clinical Trials Recommendations: Design and conduct of clinical trials of lifestyle diet and exercise interventions for osteoarthritis.

Science.gov (United States)

Messier, S P; Callahan, L F; Golightly, Y M; Keefe, F J

2015-05-01

The objective was to develop a set of "best practices" for use as a primer for those interested in entering the clinical trials field for lifestyle diet and/or exercise interventions in osteoarthritis (OA), and as a set of recommendations for experienced clinical trials investigators. A subcommittee of the non-pharmacologic therapies committee of the OARSI Clinical Trials Working Group was selected by the Steering Committee to develop a set of recommended principles for non-pharmacologic diet/exercise OA randomized clinical trials. Topics were identified for inclusion by co-authors and reviewed by the subcommittee. Resources included authors' expert opinions, traditional search methods including MEDLINE (via PubMed), and previously published guidelines. Suggested steps and considerations for study methods (e.g., recruitment and enrollment of participants, study design, intervention and assessment methods) were recommended. The recommendations set forth in this paper provide a guide from which a research group can design a lifestyle diet/exercise randomized clinical trial in patients with OA. Copyright © 2015 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Design features of HTMR-Hybrid Toroidal Magnet Tokamak Reactor

International Nuclear Information System (INIS)

Rosatelli, F.; Avanzini, P.G.; Brunelli, B.; Derchi, D.; Magnasco, M.; Grattarola, M.; Peluffo, M.; Raia, G.; Zampaglione, V.

1985-01-01

The HTMR (Hybrid Toroidal Magnet Tokamak Reactor) conceptual design is aimed to demonstrate the feasibility of a Tokamak reactor which could fulfill the scientific and technological objectives expected from next generation devices (e.g. INTOR-NET) with size and costs as small as possible. An hybrid toroidal field magnet, made up by copper and superconducting coils, seems to be a promising solution, allowing a considerable flexibility in machine performances, so as to gain useful margins in front of the uncertainties in confinement time scaling laws and beta and plasma density limits. In this paper the authors describe the optimization procedure for the hybrid magnet configuration, the main design features of HTMR and the preliminary mechanical calculations of the superconducting toroidal coils

Guidelines for pre-clinical assessment of the acetylcholine receptor-specific passive transfer myasthenia gravis model - recommendations for methods and experimental designs

Science.gov (United States)

Kusner, Linda L.; Losen, Mario; Vincent, Angela; Lindstrom, Jon; Tzartos, Socrates; Lazaridis, Konstantinos; Martinez-Martinez, Pilar

2015-01-01

Antibodies against the muscle acetylcholine receptor (AChR) are the most common cause of myasthenia gravis (MG). Passive transfer of AChR antibodies from MG patients into animals reproduces key features of human disease, including antigenic modulation of the AChR, complement-mediated damage of the neuromuscular junction, and muscle weakness. Similarly, AChR antibodies generated by active immunization in experimental autoimmune MG models can subsequently be passively transferred to other animals and induce weakness. The passive transfer model is useful to test therapeutic strategies aimed at the effector mechanism of the autoantibodies. Here we summarize published and unpublished experience using the AChR passive transfer MG model in mice, rats and rhesus monkeys, and give recommendations for the design of preclinical studies in order to facilitate translation of positive and negative results to improve MG therapies. PMID:25743217

Robustness of Adaptive Survey Designs to Inaccuracy of Design Parameters

Directory of Open Access Journals (Sweden)

Burger Joep

2017-09-01

Full Text Available Adaptive survey designs (ASDs optimize design features, given 1 the interactions between the design features and characteristics of sampling units and 2 a set of constraints, such as a budget and a minimum number of respondents. Estimation of the interactions is subject to both random and systematic error. In this article, we propose and evaluate four viewpoints to assess robustness of ASDs to inaccuracy of design parameter estimates: the effect of both imprecision and bias on both ASD structure and ASD performance. We additionally propose three distance measures to compare the structure of ASDs. The methodology is illustrated using a simple simulation study and a more complex but realistic case study on the Dutch Travel Survey. The proposed methodology can be applied to other ASD optimization problems. In our simulation study and case study, the ASD was fairly robust to imprecision, but not to realistic dynamics in the design parameters. To deal with the sensitivity of ASDs to changing design parameters, we recommend to learn and update the design parameters.

Multiple approaches to valuation of conservation design and low-impact development features in residential subdivisions.

Science.gov (United States)

Bowman, Troy; Tyndall, John C; Thompson, Janette; Kliebenstein, James; Colletti, Joe P

2012-08-15

Residents, developers and civic officials are often faced with difficult decisions about appropriate land uses in and around metropolitan boundaries. Urban expansion brings with it the potential for negative environmental impacts, but there are alternatives, such as conservation subdivision design (CSD) or low-impact development (LID), which offer the possibility of mitigating some of these effects at the development site. Many urban planning jurisdictions across the Midwest do not currently have any examples of these designs and lack information to identify public support or barriers to use of these methods. This is a case study examining consumer value for conservation and low-impact design features in one housing market by using four different valuation techniques to estimate residents' willingness to pay for CSD and LID features in residential subdivisions. A contingent valuation survey of 1804 residents in Ames, IA assessed familiarity with and perceptions of subdivision development and used an ordered value approach to estimate willingness to pay for CSD and LID features. A majority of residents were not familiar with CSD or LID practices. Residents indicated a willingness to pay for most CSD and LID features with the exception of clustered housing. Gender, age, income, familiarity with LID practices, perceptions of attractiveness of features and the perceived effect of CSD and LID features on ease of future home sales were important factors influencing residents' willingness to pay. A hypothetical referendum measured willingness to pay for tax-funded conservation land purchases and estimated that a property tax of around $50 would be the maximum increase that would pass. Twenty-seven survey respondents participated in a subsequent series of experimental real estate negotiations that used an experimental auction mechanism to estimate willingness to pay for CSD and LID features. Participants indicated that clustered housing (with interspersed preserved forest

Increasing consumer demand for tobacco treatments: Ten design recommendations for clinicians and healthcare systems.

Science.gov (United States)

Woods, Susan Swartz; Jaén, Carlos Roberto

2010-03-01

Health professionals play an important role in addressing patient tobacco use in clinical settings. While there is clear evidence that identifying tobacco use and assisting smokers in quitting affects outcomes, challenges to improve routine, clinician-delivered tobacco intervention persist. The Consumer Demand Initiative has identified simple design principles to increase consumers' use of proven tobacco treatments. Applying these design strategies to activities across the healthcare system, we articulate ten recommendations that can be implemented in the context of most clinical systems where most clinicians work. The recommendations are: (1) reframe the definition of success, (2) portray proven treatments as the best care, (3) redesign the 5A's of tobacco intervention, (4) be ready to deliver the right treatment at the right time, (5) move tobacco from the social history to the problem list, (6) use words as therapy and language that makes sense, (7) fit tobacco treatment into clinical team workflows, (8) embed tobacco treatment into health information technology, (9) make every encounter an opportunity to intervene, and (10) end social disparities for tobacco users. Clinical systems need to change to improve tobacco treatment implementation. The consumer- and clinician-centered recommendations provide a roadmap that focuses on increasing clinician performance through greater understanding of the clinician's role in helping tobacco users, highlighting the value of evidence-based tobacco treatments, employing shared decision-making skills, and integrating routine tobacco treatment into clinical system routines. Published by Elsevier Inc.

Smart Mirror: Intelligent Makeup Recommendation and Synthesis

OpenAIRE

Nguyen, Tam V.; Liu, Luoqi

2017-01-01

The female facial image beautification usually requires professional editing softwares, which are relatively difficult for common users. In this demo, we introduce a practical system for automatic and personalized facial makeup recommendation and synthesis. First, a model describing the relations among facial features, facial attributes and makeup attributes is learned as the makeup recommendation model for suggesting the most suitable makeup attributes. Then the recommended makeup attributes...

Language Evolution: Why Hockett's Design Features are a Non-Starter.

Science.gov (United States)

Wacewicz, Sławomir; Żywiczyński, Przemysław

The set of design features developed by Charles Hockett in the 1950s and 1960s remains probably the most influential means of juxtaposing animal communication with human language. However, the general theoretical perspective of Hockett is largely incompatible with that of modern language evolution research. Consequently, we argue that his classificatory system-while useful for some descriptive purposes-is of very limited use as a theoretical framework for evolutionary linguistics. We see this incompatibility as related to the ontology of language, i.e. deriving from Hockett's interest in language as a product rather than a suite of sensorimotor, cognitive and social abilities that enable the use but also acquisition of language by biological creatures (the faculty of language ). After a reconstruction of Hockett's views on design features, we raise two criticisms: focus on the means at the expense of content and focus on the code itself rather than the cognitive abilities of its users . Finally, referring to empirical data, we illustrate some of the problems resulting from Hockett's approach by addressing three specific points-namely arbitrariness and semanticity , cultural transmission , and displacement -and show how the change of perspective allows to overcome those difficulties.

Social network supported process recommender system.

Science.gov (United States)

Ye, Yanming; Yin, Jianwei; Xu, Yueshen

2014-01-01

Process recommendation technologies have gained more and more attention in the field of intelligent business process modeling to assist the process modeling. However, most of the existing technologies only use the process structure analysis and do not take the social features of processes into account, while the process modeling is complex and comprehensive in most situations. This paper studies the feasibility of social network research technologies on process recommendation and builds a social network system of processes based on the features similarities. Then, three process matching degree measurements are presented and the system implementation is discussed subsequently. Finally, experimental evaluations and future works are introduced.

Social Network Supported Process Recommender System

Directory of Open Access Journals (Sweden)

Yanming Ye

2014-01-01

Full Text Available Process recommendation technologies have gained more and more attention in the field of intelligent business process modeling to assist the process modeling. However, most of the existing technologies only use the process structure analysis and do not take the social features of processes into account, while the process modeling is complex and comprehensive in most situations. This paper studies the feasibility of social network research technologies on process recommendation and builds a social network system of processes based on the features similarities. Then, three process matching degree measurements are presented and the system implementation is discussed subsequently. Finally, experimental evaluations and future works are introduced.

Blended/Hybrid Courses: A Review of the Literature and Recommendations for Instructional Designers and Educators

Science.gov (United States)

Helms, Samuel A.

2014-01-01

This article explores some of the literature on blended/hybrid learning and identifies recommendations for instructional designers and faculty. Terminology and definitions are discussed first including the debate between the words "blended" and "hybrid." A working definition for the article is discussed but the article does not…

Recommendation systems in software engineering

CERN Document Server

Robillard, Martin P; Walker, Robert J; Zimmermann, Thomas

2014-01-01

With the growth of public and private data stores and the emergence of off-the-shelf data-mining technology, recommendation systems have emerged that specifically address the unique challenges of navigating and interpreting software engineering data.This book collects, structures and formalizes knowledge on recommendation systems in software engineering. It adopts a pragmatic approach with an explicit focus on system design, implementation, and evaluation. The book is divided into three parts: "Part I - Techniques" introduces basics for building recommenders in software engineering, including techniques for collecting and processing software engineering data, but also for presenting recommendations to users as part of their workflow.?"Part II - Evaluation" summarizes methods and experimental designs for evaluating recommendations in software engineering.?"Part III - Applications" describes needs, issues and solution concepts involved in entire recommendation systems for specific software engineering tasks, fo...

Design and physical features of inductive coaxial copper vapor lasers

Energy Technology Data Exchange (ETDEWEB)

Batenin, V. M. [Russian Academy of Sciences, Joint Institute for High Temperatures (Russian Federation); Kazaryan, M. A. [Russian Academy of Sciences, Lebedev Physical Institute (Russian Federation); Karpukhin, V. T. [Russian Academy of Sciences, Joint Institute for High Temperatures (Russian Federation); Lyabin, N. A. [Istok Research and Production Corporation (Russian Federation); Malikov, M. M., E-mail: mmalikov@oivtran.ru [Russian Academy of Sciences, Joint Institute for High Temperatures (Russian Federation)

2016-11-15

A physical model of a copper vapor laser pumped by a pulse-periodic inductive (electrodeless) discharge is considered. The feasibility of efficient laser pumping by an inductive discharge and reaching high output parameters comparable to those of conventional copper vapor lasers pumped by a longitudinal electrode discharge is demonstrated. The design and physical features of an inductive copper vapor laser with an annular working volume are discussed.

Practical recommendations for the evaluation of improvement initiatives

Science.gov (United States)

Parry, Gareth; Coly, Astou; Goldmann, Don; Rowe, Alexander K; Chattu, Vijay; Logiudice, Deneil; Rabrenovic, Mihajlo; Nambiar, Bejoy

2018-01-01

Abstract A lack of clear guidance for funders, evaluators and improvers on what to include in evaluation proposals can lead to evaluation designs that do not answer the questions stakeholders want to know. These evaluation designs may not match the iterative nature of improvement and may be imposed onto an initiative in a way that is impractical from the perspective of improvers and the communities with whom they work. Consequently, the results of evaluations are often controversial, and attribution remains poorly understood. Improvement initiatives are iterative, adaptive and context-specific. Evaluation approaches and designs must align with these features, specifically in their ability to consider complexity, to evolve as the initiative adapts over time and to understand the interaction with local context. Improvement initiatives often identify broadly defined change concepts and provide tools for care teams to tailor these in more detail to local conditions. Correspondingly, recommendations for evaluation are best provided as broad guidance, to be tailored to the specifics of the initiative. In this paper, we provide practical guidance and recommendations that funders and evaluators can use when developing an evaluation plan for improvement initiatives that seeks to: identify the questions stakeholders want to address; develop the initial program theory of the initiative; identify high-priority areas to measure progress over time; describe the context the initiative will be applied within; and identify experimental or observational designs that will address attribution. PMID:29447410

Topic Space: Rapid Prototyping a Mobile Augmented Reality Recommendation App

Directory of Open Access Journals (Sweden)

Jim Hahn

2015-10-01

Full Text Available With funding from an Institute of Museum and Library Services (IMLS Sparks! Ignition Grant, researchers from the University of Illinois Library designed and tested a mobile recommender app with augmented reality features. By embedding open source optical character recognition software into a “Topic Space” module, the augmented reality app can recognize call numbers on a book in the library and suggest relevant items that are not shelved nearby. Topic Space can also show users items that are normally shelved in the starting location but that are currently checked out. Using formative UX methods, grant staff shaped app interface and functionality through early user testing. This paper reports results of UX testing; a redesigned mobile interface, and provides considerations on the future development of personalized recommendation functionality.

Preliminary safety analysis for key design features of KALIMER

Energy Technology Data Exchange (ETDEWEB)

Hahn, D. H.; Kwon, Y. M.; Chang, W. P.; Suk, S. D.; Lee, S. O.; Lee, Y. B.; Jeong, K. S

2000-07-01

KAERI is currently developing the conceptual design of a liquid metal reactor, KALIMER(Korea Advanced Liquid Metal Reactor) under the long-term nuclear R and D program. In this report, descriptions of the KALIMER safety design features and safety analyses results for selected ATWS accidents are presented. First, the basic approach to achieve the safety goal is introduced in chapter 1, and the safety evaluation procedure for the KALIMER design is described in chapter 2. It includes event selection, event categorization, description of design basis events, and beyond design basis events. In chapter 3, results of inherent safety evaluations for the KALIMER conceptual design are presented. The KALIMER core and plant system are designed to assure design performance during a selected set of events without either reactor control or protection system intervention. Safety analyses for the postulated anticipated transient without scram(ATWS) have been performed to investigate the KALIMER system response to the events. They are categorized as bounding events(BEs) because of their low probability of occurrence. In chapter 4, the design of the KALIMER containment dome and the results of its performance analysis are presented. The designs of the existing LMR containment and the KALIMER containment dome have been compared in this chapter. Procedure of the containment performance analysis and the analysis results are described along with the accident scenario and source terms. Finally, a simple methodology is introduced to investigate the core kinetics and hydraulic behavior during HCDA in chapter 5. Mathematical formulations have been developed in the framework of the modified bethe-tait method, and scoping analyses have been performed for the KALIMER core behavior during super-prompt critical excursions.

An Axiomatic Design Approach of Nanofluid-Engineered Nuclear Safety Features for Generation III+ React

International Nuclear Information System (INIS)

Bang, In Cheol; Heo, Gyun Young; Jeong, Yong Hoon; Heo, Sun

2009-01-01

A variety of Generation III/III+ reactor designs featuring enhanced safety and improved economics are being proposed by nuclear power industries around the world to solve the future energy supply shortfall. Nanofluid coolants showing an improved thermal performance are being considered as a new key technology to secure nuclear safety and economics. However, it should be noted that there is a lack of comprehensible design works to apply nanofluids to Generation III+ reactor designs. In this work, the review of accident scenarios that consider expected nanofluid mechanisms is carried out to seek detailed application spots. The Axiomatic Design (AD) theory is then applied to systemize the design of nanofluid-engineered nuclear safety systems such as Emergency Core Cooling System (ECCS) and External Reactor Vessel Cooling System (ERVCS). The various couplings between Gen-III/III+ nuclear safety features and nanofluids are investigated and they try to be reduced from the perspective of the AD in terms of prevention/mitigation of severe accidents. This study contributes to the establishment of a standard communication protocol in the design of nanofluid-engineered nuclear safety systems

weHelp: A Reference Architecture for Social Recommender Systems.

Science.gov (United States)

Sheth, Swapneel; Arora, Nipun; Murphy, Christian; Kaiser, Gail

2010-01-01

Recommender systems have become increasingly popular. Most of the research on recommender systems has focused on recommendation algorithms. There has been relatively little research, however, in the area of generalized system architectures for recommendation systems. In this paper, we introduce weHelp : a reference architecture for social recommender systems - systems where recommendations are derived automatically from the aggregate of logged activities conducted by the system's users. Our architecture is designed to be application and domain agnostic. We feel that a good reference architecture will make designing a recommendation system easier; in particular, weHelp aims to provide a practical design template to help developers design their own well-modularized systems.

Exciting Action Photos, Feature Articles, Spread Designs Equal Exciting Sports Coverage.

Science.gov (United States)

Konkle, Bruce E.

1996-01-01

Discusses what a high school yearbook sports staff should deliver to their peers in overall sports coverage. Suggests that keys to good sports coverage are quality action photos that entice readers, "featurized" sports articles, attention to the overall design of the spreads, team photos that which show faces clearly, and a scoreboard on…

Accommodation of unprotected accidents by inherent safety design features in metallic and oxide-fueled LMFBRs

International Nuclear Information System (INIS)

Su, S.F.; Cahalan, J.E.; Sevy, R.H.

1985-01-01

This paper presents the results of a systematic study of the effectiveness of intrinsic design features to mitigate the consequences of unprotected accidents in metallic and oxide-fueled LMFBRs. The accidents analyzed belong to the class generally considered to lead to core disruption; unprotected loss-of-flow (LOF) and transient over-power (TOP). The results of the study demonstrate the potential for design features to meliorate accident consequences, and in some cases to render them benign. Emphasis is placed on the relative performance of metallic and oxide-fueled core designs, and safety margins are quantified in sensitivity studies. All analyses were carried out using the SASSYS LMFBR systems analysis code (1)

Structural and compositional features of high-rise buildings: experimental design in Yekaterinburg

Science.gov (United States)

Yankovskaya, Yulia; Lobanov, Yuriy; Temnov, Vladimir

2018-03-01

The study looks at the specifics of high-rise development in Yekaterinburg. High-rise buildings are considered in the context of their historical development, structural features, compositional and imaginative design techniques. Experience of Yekaterinburg architects in experimental design is considered and analyzed. Main issues and prospects of high-rise development within the Yekaterinburg structure are studied. The most interesting and significant conceptual approaches to the structural and compositional arrangement of high-rise buildings are discussed.

Design of spent fuel storage facilities

International Nuclear Information System (INIS)

1994-01-01

This Safety Guide is for interim spent fuel storage facilities that are not integral part of an operating nuclear power plant. Following the introduction, Section 2 describes the general safety requirements applicable to the design of both wet and dry spent fuel storage facilities; Section 3 deals with the design requirements specific to either wet or dry storage. Recommendations for the auxiliary systems of any storage facility are contained in Section 4; these are necessary to ensure the safety of the system and its safe operation. Section 5 provides recommendations for establishing the quality assurance system for a storage facility. Section 6 discusses the requirements for inspection and maintenance that must be considered during the design. Finally, Section 7 provides guidance on design features to be considered to facilitate eventual decommissioning. 18 refs

Design evaluaion: pneumatic transport and classification

International Nuclear Information System (INIS)

McNair, J.M.

1979-10-01

This report describes the evaluation of selected design features of the cold engineering scale pneumatic transport and classification subsystems used in the development of the head-end equipment for HTGR fuel reprocessing. The report identifies areas that require further design effort and evaluation of alternatives prior to the design of the HTGR reference recycle facility (HRRF). Seven areas in the transport subsystem and three in the classification subsystem were selected for evaluation. Seventeen specific recommendations are presented for further design effort

Learning Points and Routes to Recommend Trajectories

OpenAIRE

Chen, Dawei; Ong, Cheng Soon; Xie, Lexing

2016-01-01

The problem of recommending tours to travellers is an important and broadly studied area. Suggested solutions include various approaches of points-of-interest (POI) recommendation and route planning. We consider the task of recommending a sequence of POIs, that simultaneously uses information about POIs and routes. Our approach unifies the treatment of various sources of information by representing them as features in machine learning algorithms, enabling us to learn from past behaviour. Info...

Technology, recommendation and design: on being a 'Paternalistic philosopher'

NARCIS (Netherlands)

Wong, Pak-Hang

2013-01-01

Philosophers have talked to each other about moral issues concerning technology, but few of them have talked about issues of technology and the good life, and even fewer have talked about technology and the good life with the public in the form of recommendation. In effect, recommendations for

OARSI Clinical Trials Recommendations

DEFF Research Database (Denmark)

Emery, C. A.; Roos, Ewa M.; Verhagen, E.

2015-01-01

The risk of post-traumatic osteoarthritis (PTOA) substantially increases following joint injury. Research efforts should focus on investigating the efficacy of preventative strategies in high quality randomized controlled trials (RCT). The objective of these OARSI RCT recommendations is to inform...... the design, conduct and analytical approaches to RCTs evaluating the preventative effect of joint injury prevention strategies. Recommendations regarding the design, conduct, and reporting of RCTs evaluating injury prevention interventions were established based on the consensus of nine researchers...... internationally with expertise in epidemiology, injury prevention and/or osteoarthritis (OA). Input and resultant consensus was established through teleconference, face to face and email correspondence over a 1 year period. Recommendations for injury prevention RCTs include context specific considerations...

Personalised news filtering and recommendation system using Chi-square statistics-based K-nearest neighbour (χ2SB-KNN) model

Science.gov (United States)

Adeniyi, D. A.; Wei, Z.; Yang, Y.

2017-10-01

Recommendation problem has been extensively studied by researchers in the field of data mining, database and information retrieval. This study presents the design and realisation of an automated, personalised news recommendations system based on Chi-square statistics-based K-nearest neighbour (χ2SB-KNN) model. The proposed χ2SB-KNN model has the potential to overcome computational complexity and information overloading problems, reduces runtime and speeds up execution process through the use of critical value of χ2 distribution. The proposed recommendation engine can alleviate scalability challenges through combined online pattern discovery and pattern matching for real-time recommendations. This work also showcases the development of a novel method of feature selection referred to as Data Discretisation-Based feature selection method. This is used for selecting the best features for the proposed χ2SB-KNN algorithm at the preprocessing stage of the classification procedures. The implementation of the proposed χ2SB-KNN model is achieved through the use of a developed in-house Java program on an experimental website called OUC newsreaders' website. Finally, we compared the performance of our system with two baseline methods which are traditional Euclidean distance K-nearest neighbour and Naive Bayesian techniques. The result shows a significant improvement of our method over the baseline methods studied.

Fatigue and fail-safe design features of the DC-10 airplane

Science.gov (United States)

Stone, M. E.

1972-01-01

The philosophy and methods used in the design of the DC-10 aircraft to assure structural reliability against cracks under repeated service loads are described in detail. The approach consists of three complementary parts: (1) the structure is designed to be fatigue resistant for a crack-free life of 60,000 flight hours; (2) inasmuch as small undetected cracks could develop from other sources, such as material flaws and manufacturing preloads, the structure also is designed to arrest and control cracks within a reasonable service-inspection interval; and (3) a meaningful service-inspection program has been defined on the basis of analysis and test experience from the design development program. This service-inspection program closes the loop to assure the structural integrity of the DC-10 airframe. Selected materials, fasteners, and structural arrangements are used to achieve these design features with minimum structural weight and with economy in manufacturing and maintenance. Extensive analyses and testing were performed to develop and verify the design. The basic design considerations for fatigue-resistant structure are illustrated in terms of material selection, design loads spectra, methods for accurate stress and fatigue damage analysis, and proven concepts for efficient detail design.

Acoustical features of two Mayan monuments at Chichen Itza: Accident or design?

Science.gov (United States)

Lubman, David

2002-11-01

Chichen Itza dominated the early postclassic Maya world, ca. 900-1200 C.E. Two of its colossal monuments, the Great Ball Court and the temple of Kukulkan, reflect the sophisticated, hybrid culture of a Mexicanized Maya civilization. The architecture seems intended for ceremony and ritual drama. Deducing ritual practices will advance the understanding of a lost civilization, but what took place there is largely unknown. Perhaps acoustical science can add value. Unexpected and unusual acoustical features can be interpreted as intriguing clues or irrelevant accidents. Acoustical advocates believe that, when combined with an understanding of the Maya worldview, acoustical features can provide unique insights into how the Maya designed and used theater spaces. At Chichen Itza's monuments, sound reinforcement features improve rulers and priests ability to address large crowds, and Ball Court whispering galleries permit speech communication over unexpectedly large distances. Handclaps at Kukulkan stimulate chirps that mimic a revered bird (''Kukul''), thus reinforcing cultic beliefs. A ball striking playing field wall stimulates flutter echoes at the Great Ball Court; their strength and duration arguably had dramatic, mythic, and practical significance. Interpretations of the possible mythic, magic, and political significance of sound phenomena at these Maya monuments strongly suggests intentional design.

Richards Barrier LA Reference Design Feature Evaluation

International Nuclear Information System (INIS)

N.E. Kramer

1999-01-01

The Richards Barrier is one of the design features of the repository to be considered for the License Application (LA), Richards was a soil scientist who first described the diversion of moisture between two materials with different hydrologic properties. In this report, a Richards Barrier is a special type of backfill with a fine-grained material (such as sand) overlaying a coarse-grained material (such as gravel). Water that enters an emplacement drift will first encounter the fine-grained material and be transported around the coarse-grained material covering the waste package, thus protecting the waste package from contact with most of the groundwater. The objective of this report is to discuss the benefits and liabilities to the repository by the inclusion of a Richards Barrier type backfill in emplacement drifts. The Richards Barrier can act as a barrier to water flow, can reduce the waste package material dissolution rate, limit mobilization of the radionuclides, and can provide structural protection for the waste package. The scope of this report is to: (1) Analyze the behavior of barrier materials following the intrusion of groundwater for influxes of 1 to 300 mm per year. The report will demonstrate diversion of groundwater intrusions into the barrier over an extended time period when seismic activity and consolidation may cause the potential for liquefaction and settlement of the Richards Barrier. (2) Review the thermal effects of the Richards Barrier on material behavior. (3) Analyze the effect of rockfall on the performance of the Richards Barrier and the depth of the barrier required to protect waste packages under the barrier. (4) Review radiological and heating conditions on placement of multiple layers of the barrier. Subsurface Nuclear Safety personnel will perform calculations to determine the radiation reduction-time relationship and shielding capacity of the barrier. (5) Evaluate the effects of ventilation on cooling of emplacement drifts and

Interface design recommendations for computerised clinical audit and feedback: Hybrid usability evidence from a research-led system.

Science.gov (United States)

Brown, Benjamin; Balatsoukas, Panos; Williams, Richard; Sperrin, Matthew; Buchan, Iain

2016-10-01

Audit and Feedback (A&F) is a widely used quality improvement technique that measures clinicians' clinical performance and reports it back to them. Computerised A&F (e-A&F) system interfaces may consist of four key components: (1) Summaries of clinical performance; (2) Patient lists; (3) Patient-level data; (4) Recommended actions. There is a lack of evidence regarding how to best design e-A&F interfaces; establishing such evidence is key to maximising usability, and in turn improving patient safety. To evaluate the usability of a novel theoretically-informed and research-led e-A&F system for primary care (the Performance Improvement plaN GeneratoR: PINGR). (1) Describe PINGR's design, rationale and theoretical basis; (2) Identify usability issues with PINGR; (3) Understand how these issues may interfere with the cognitive goals of end-users; (4) Translate the issues into recommendations for the user-centred design of e-A&F systems. Eight experienced health system evaluators performed a usability inspection using an innovative hybrid approach consisting of five stages: (1) Development of representative user tasks, Goals, and Actions; (2) Combining Heuristic Evaluation and Cognitive Walkthrough methods into a single protocol to identify usability issues; (3) Consolidation of issues; (4) Severity rating of consolidated issues; (5) Analysis of issues according to usability heuristics, interface components, and Goal-Action structure. A final list of 47 issues were categorised into 8 heuristic themes. The most error-prone heuristics were 'Consistency and standards' (13 usability issues; 28% of the total) and 'Match between system and real world' (n=10, 21%). The recommended actions component of the PINGR interface had the most usability issues (n=21, 45%), followed by patient-level data (n=5, 11%), patient lists (n=4, 9%), and summaries of clinical performance (n=4, 9%). The most error-prone Actions across all user Goals were: (1) Patient selection from a list; (2) Data

An Agent Framework of Tourism Recommender System

Directory of Open Access Journals (Sweden)

Jia Zhi Yang

2016-01-01

Full Text Available This paper proposes the development of an Agent framework for tourism recommender system. The recommender system can be featured as an online web application which is capable of generating a personalized list of preference attractions for tourists. Traditional technologies of classical recommender system application domains, such as collaborative filtering, content-based filtering and content-based filtering are effectively adopted in the framework. In the framework they are constructed as Agents that can generate recommendations respectively. Recommender Agent can generate recommender information by integrating the recommendations of Content-based Agent, collaborative filtering-based Agent and constraint-based Agent. In order to make the performance more effective, linear combination method of data fusion is applied. User interface is provided by the tourist Agent in form of webpages and mobile app.

When Factorization Meets Heterogeneous Latent Topics：An Interpretable Cross-Site Recommendation Framework

Institute of Scientific and Technical Information of China (English)

辛欣; 林钦佑; 魏骁驰; 黄河燕

2015-01-01

Data sparsity is a well-known challenge in recommender systems. Previous studies alleviate this problem by incorporating the information within the corresponding social media site. In this paper, we solve this challenge by exploring cross-site information. Specifically, we examine: 1) how to effectively and efficiently utilize cross-site ratings and content features to improve recommendation performance and 2) how to make the recommendation interpretable by utilizing content features. We propose a joint model of matrix factorization and latent topic analysis. Heterogeneous content features are modeled by multiple kinds of latent topics. In addition, the combination of matrix factorization and latent topics makes the recommendation result interpretable. Therefore, the above two issues are simultaneously solved. Through a real-world dataset, where user behaviors in three social media sites are collected, we demonstrate that the proposed model is effective in improving recommendation performance and interpreting the rationale of ratings.

Advanced power generation systems for the 21st Century: Market survey and recommendations for a design philosophy

Energy Technology Data Exchange (ETDEWEB)

Andriulli, J.B.; Gates, A.E.; Haynes, H.D.; Klett, L.B.; Matthews, S.N.; Nawrocki, E.A.; Otaduy, P.J.; Scudiere, M.B.; Theiss, T.J.; Thomas, J.F.; Tolbert, L.M.; Yauss, M.L.; Voltz, C.A.

1999-11-01

The purpose of this report is to document the results of a study designed to enhance the performance of future military generator sets (gen-sets) in the medium power range. The study includes a market survey of the state of the art in several key component areas and recommendations comprising a design philosophy for future military gen-sets. The market survey revealed that the commercial market is in a state of flux, but it is currently or will soon be capable of providing the technologies recommended here in a cost-effective manner. The recommendations, if implemented, should result in future power generation systems that are much more functional than today's gen-sets. The number of differing units necessary (both family sizes and frequency modes) to cover the medium power range would be decreased significantly, while the weight and volume of each unit would decrease, improving the transportability of the power source. Improved fuel economy and overall performance would result from more effective utilization of the prime mover in the generator. The units would allow for more flexibility and control, improved reliability, and more effective power management in the field.

Design and safety features of commercial nuclear power plants in Japan, 1976 edition

International Nuclear Information System (INIS)

Izumi, Fumio; Harayama, Yasuo

1976-10-01

The December 1975 edition (JAERI-M 5959) contained design particulars and safety features of 20 commercial nuclear power plants in Japan as of December 1974. Subsequently new plants have been put into operation and some plants under construction have undergone design modifications. The present edition presents similar data of the commercial nuclear power plants in Japan up to June 1976, compiled by computer processing. (auth.)

Selection of low-risk design guidelines for energetic events

International Nuclear Information System (INIS)

Ferguson, D.; Marchaterre, J.; Graham, J.

1982-01-01

This paper recommends the establishment of specific design guidelines for protection against potential, but low-probability, energetic events. These guidelines recognize the plant protective features incorporated to prevent such events, as well as the inherent capability of the plant to accommodate a certain level of energy release. Further, their application is recommended within the context of necessary standardized and agreed-upon acceptance criteria which are less restrictive than ASME code requirements. The paper provides the background upon which the selection of the design is made, including the characterization of energetic events dependent on various core-design parameters, and including the necessity of a low-risk design balanced between prevention of accidents and the mitigation of consequences

An Effective Recommender Algorithm for Cold-Start Problem in Academic Social Networks

Directory of Open Access Journals (Sweden)

Vala Ali Rohani

2014-01-01

Full Text Available Abundance of information in recent years has become a serious challenge for web users. Recommender systems (RSs have been often utilized to alleviate this issue. RSs prune large information spaces to recommend the most relevant items to users by considering their preferences. Nonetheless, in situations where users or items have few opinions, the recommendations cannot be made properly. This notable shortcoming in practical RSs is called cold-start problem. In the present study, we propose a novel approach to address this problem by incorporating social networking features. Coined as enhanced content-based algorithm using social networking (ECSN, the proposed algorithm considers the submitted ratings of faculty mates and friends besides user’s own preferences. The effectiveness of ECSN algorithm was evaluated by implementing it in MyExpert, a newly designed academic social network (ASN for academics in Malaysia. Real feedbacks from live interactions of MyExpert users with the recommended items are recorded for 12 consecutive weeks in which four different algorithms, namely, random, collaborative, content-based, and ECSN were applied every three weeks. The empirical results show significant performance of ECSN in mitigating the cold-start problem besides improving the prediction accuracy of recommendations when compared with other studied recommender algorithms.

CANDU with supercritical water coolant: conceptual design features

International Nuclear Information System (INIS)

Spinks, N.

1997-01-01

An advanced CANDU reactor, with supercritical water as coolant, has many attractive design features. The pressure exceeds 22 MPa but coolant temperatures in excess of 370 degrees C can be reached without encountering the two-phase region with its associated fuel-dry-out and flow-instability problems. Increased coolant temperature leads to increased plant thermodynamic efficiency reducing unit energy cost through reduced specific capital cost and reduced fueling cost. Increased coolant temperature leads to reduced void reactivity via reduced coolant in-core density. Light water becomes a coolant option. To preserve neutron economy, an advanced fuel channel is needed and is described below. A supercritical-water-cooled CANDU can evolve as fuel capabilities evolve to withstand increasing coolant temperatures. (author)

OARSI Clinical Trials Recommendations: Design and conduct of clinical trials for hand osteoarthritis.

Science.gov (United States)

Kloppenburg, M; Maheu, E; Kraus, V B; Cicuttini, F; Doherty, M; Dreiser, R-L; Henrotin, Y; Jiang, G-L; Mandl, L; Martel-Pelletier, J; Nelson, A E; Neogi, T; Pelletier, J-P; Punzi, L; Ramonda, R; Simon, L S; Wang, S

2015-05-01

Hand osteoarthritis (OA) is a very frequent disease, but yet understudied. However, a lot of works have been published in the past 10 years, and much has been done to better understand its clinical course and structural progression. Despite this new knowledge, few therapeutic trials have been conducted in hand OA. The last OARSI recommendations for the conduct of clinical trials in hand OA dates back to 2006. The present recommendations aimed at updating previous recommendations, by incorporating new data. The purpose of this expert opinion, consensus driven exercise is to provide evidence-based guidance on the design, execution and analysis of clinical trials in hand OA, where published evidence is available, supplemented by expert opinion, where evidence is lacking, to perform clinical trials in hand OA, both for symptom and for structure-modification. They indicate core outcome measurement sets for studies in hand OA, and list the methods and instruments that should be used to measure symptoms or structure. For both symptom- and structure-modification, at least pain, physical function, patient global assessment, HR-QoL, joint activity and hand strength should be assessed. In addition, for structure-modification trials, structural progression should be measured by radiographic changes. We also provide a research agenda listing many unsolved issues that seem to most urgently need to be addressed from the perspective of performing "good" clinical trials in hand OA. These updated OARSI recommendations should allow for better standardizing the conduct of clinical trials in hand OA in the next future. Copyright © 2015 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Verbal and numerical consumer recommendations: switching between recommendation formats leads to preference inconsistencies.

Science.gov (United States)

Maciejovsky, Boris; Budescu, David V

2013-06-01

Many Web sites provide consumers with product recommendations, which are typically presented by a sequence of verbal reviews and numerical ratings. In three experiments, we demonstrate that when participants switch between formats (e.g., from verbal to numerical), they are more prone to preference inconsistencies than when they aggregate the recommendations within the same format (e.g., verbal). When evaluating recommendations, participants rely primarily on central-location measures (e.g., mean) and less on other distribution characteristics (e.g., variance). We explain our findings within the theoretical framework of stimulus-response compatibility and we make practical recommendations for the design of recommendation systems and Web portals.

Seismic design features of the ACR Nuclear Power Plant

International Nuclear Information System (INIS)

Elgohary, M.; Saudy, A.; Aziz, T.

2003-01-01

features including the design soil/rock foundation profiles and input GRS that are used in the seismic design and qualification of the ACR are presented. It is concluded that the selected seismic design input parameters for the ACR plant meet current international technical and regulatory requirements. (author)

Recommender systems in knowledge-mining

Science.gov (United States)

Volna, Eva

2017-07-01

The subject of the paper is to analyse the possibilities of application of recommender systems in the field of data mining. The work focuses on three basic types of recommender systems (collaborative, content-based and hybrid). The goal of the article is to evaluate which of these three concepts of recommender systems provides forecast with the lowest error rate in the domain of recommending movies. This target is fulfilled by the practical part of the work - at first, the own recommender system was designed and created, capable of obtaining movies recommendation from the database based on the user's preferences. Next, we verified experimentally which recommender system produces more accurate results.

Some novel design features of the LBL metal vapor vacuum arc ion sources

International Nuclear Information System (INIS)

MacGill, R.A.; Brown, I.G.; Galvin, J.E.

1990-01-01

The family of MEVVA (metal vapor vacuum arc) high current metal ion sources developed at LBL over the past several years has grown to include a number of different source versions with a wide range of some of the design and operational parameters. The MicroMEVVA source is a particularly compact version, about 2 cm diam and 10 cm long, while the MEVVA IV weighs some 30 kG. MEVVAs IV and V incorporate multiple cathode assemblies (16 and 18 separate cathodes, respectively), and the operating cathode can be switched rapidly and without downtime. The new MEVVA V embodiment is quite compact considering its broad beam (10 cm), high voltage (100 kV), and multiple cathode features. The large-area extractor grids used in MEVVA V were fabricated using a particularly simple technique, and they are clamped into position and can thus be changed simply and quickly. The electrical system used to drive the arc is particularly simple and incorporates several attractive features. In this article we review and describe a number of the mechanical and electrical design features that have been developed for these sources

Recommendations for the ethical use and design of artificial intelligent care providers.

Science.gov (United States)

Luxton, David D

2014-09-01

This paper identifies and reviews ethical issues associated with artificial intelligent care providers (AICPs) in mental health care and other helping professions. Specific recommendations are made for the development of ethical codes, guidelines, and the design of AICPs. Current developments in the application of AICPs and associated technologies are reviewed and a foundational overview of applicable ethical principles in mental health care is provided. Emerging ethical issues regarding the use of AICPs are then reviewed in detail. Recommendations for ethical codes and guidelines as well as for the development of semi-autonomous and autonomous AICP systems are described. The benefits of AICPs and implications for the helping professions are discussed in order to weigh the pros and cons of their use. Existing ethics codes and practice guidelines do not presently consider the current or the future use of interactive artificial intelligent agents to assist and to potentially replace mental health care professionals. AICPs present new ethical issues that will have significant ramifications for the mental health care and other helping professions. Primary issues involve the therapeutic relationship, competence, liability, trust, privacy, and patient safety. Many of the same ethical and philosophical considerations are applicable to use and design of AICPs in medicine, nursing, social work, education, and ministry. The ethical and moral aspects regarding the use of AICP systems must be well thought-out today as this will help to guide the use and development of these systems in the future. Topics presented are relevant to end users, AI developers, and researchers, as well as policy makers and regulatory boards. Published by Elsevier B.V.

Which Doctor to Trust: A Recommender System for Identifying the Right Doctors.

Science.gov (United States)

Guo, Li; Jin, Bo; Yao, Cuili; Yang, Haoyu; Huang, Degen; Wang, Fei

2016-07-07

Key opinion leaders (KOLs) are people who can influence public opinion on a certain subject matter. In the field of medical and health informatics, it is critical to identify KOLs on various disease conditions. However, there have been very few studies on this topic. We aimed to develop a recommender system for identifying KOLs for any specific disease with health care data mining. We exploited an unsupervised aggregation approach for integrating various ranking features to identify doctors who have the potential to be KOLs on a range of diseases. We introduce the design, implementation, and deployment details of the recommender system. This system collects the professional footprints of doctors, such as papers in scientific journals, presentation activities, patient advocacy, and media exposure, and uses them as ranking features to identify KOLs. We collected the information of 2,381,750 doctors in China from 3,657,797 medical journal papers they published, together with their profiles, academic publications, and funding. The empirical results demonstrated that our system outperformed several benchmark systems by a significant margin. Moreover, we conducted a case study in a real-world system to verify the applicability of our proposed method. Our results show that doctors' profiles and their academic publications are key data sources for identifying KOLs in the field of medical and health informatics. Moreover, we deployed the recommender system and applied the data service to a recommender system of the China-based Internet technology company NetEase. Patients can obtain authority ranking lists of doctors with this system on any given disease.

Monitoring program design recommendations for uranium mining communities

International Nuclear Information System (INIS)

1978-10-01

Environmental radiological monitoring requirements and their rationale have been developed for operating uranium mine/mill sites including the pre-operational phase, and for non-operating tailings areas, in order to assess the radiological impact on the environment and follow long-term trends. These recommendations have been based on a review of regulatory standards, sources and nature of releases from mines, mills and tailings, and environmental pathway analysis. Media and measurements considered in the routine on-going programs include airborne radon, airborne particulates, external radiation, terrestrial biota, surface water, drinking water, ground water, fish and sediment. Program implementation guides are provided. An overview of sampling and field technique and specific recommendations have been made. (auth)

Empowering the end-user in smart grids: Recommendations for the design of products and services

International Nuclear Information System (INIS)

Geelen, Daphne; Reinders, Angèle; Keyson, David

2013-01-01

In discussions on smart grids, it is often stated that residential end-users will play a more active role in the management of electric power supply and demand. They are expected to shift from a passive role as consumer of electricity to an active role as co-provider. In this article, the extent to which current technologies, products and services empower end-users to take up an active role as co-providers is evaluated. Based on a review of literature and related pilot projects, current approaches were found to be driven by technical and financial considerations. There appears to be a lack of product and service design that supports end-users in their role as co-providers in a smart grid. This is reflected in the lack of thought given to how the end-users’ process of behavioral change can be supported to enable the transition from consumer to co-provider. Several recommendations are provided for product and service designers towards fostering the role of co-provider, which comes under under: (a) user interaction needs, (b) approaches to behavioral change and (c) community initiatives and management of resources. Designers are considered to play a bridging role between policy making and engineering, while facilitating involvement of end-users in the design process. - Highlights: • Overview of products and services for residential end-users in smart grids. • Evaluation of extent to which end-users are empowered to adopt a co-provider role. • Products and services often focus on technical functionality and financial incentives. • Behavioral aspects and social context would have to be taken into account more. • Design recommendations are proposed to empower end-users in becoming co-providers

Safety features of the MAPLE-X10 reactor design

International Nuclear Information System (INIS)

Lee, A.G.; Bishop, W.E.; Heeds, W.

1990-09-01

The MAPLE-X10 reactor is a D 2 0-reflected, H 2 0-cooled and -moderated pool-type reactor under construction at the Chalk River Nuclear Laboratories. This 10-MW reactor will produce key medical and industrial radio-isotopes such as 99 Mo, 125 I, and 192 Ir. As the prototype for the MAPLE research reactor concept, the reactor incorporates diverse safety features both inherent in the design and in the added engineered systems. The safety requirements are analogous to those of the Canadian CANDU power reactor since standards for the licensing of new research reactors have not been developed yet by the licensing authority in Canada

Safety features of the MAPLE-X10 reactor design

International Nuclear Information System (INIS)

Lee, A.G.; Bishop, W.E.; Heeds, W.

1990-01-01

This paper reports on the MAPLE-X10 reactor D 2 O-reflected, H 2 O-cooled and -moderated pool- type reactor, under construction at the Chalk River Nuclear Laboratories. This 10-MW will produce key medical and industrial radioisotopes such as 99 Mo, 125 I, and 192 Ir. The prototype for the MAPLE research reactor concept, the reactor incorporates diverse safety features both inherent in the design and in the added engineered systems. The safety requirements are analogous to those of the Canadian CANDU power reactor as standards for the licensing of new research reactors have not been developed by the licensing authority in Canada

Vibration isolation analysis of new design OEM damper for malaysia vehicle suspension system featuring MR fluid

Science.gov (United States)

Unuh, M. H.; Muhamad, P.; Norfazrina, H. M. Y.; Ismail, M. A.; Tanasta, Z.

2018-01-01

The applications of semi-active damper employing magnetorheological (MR) fluids keep increasing in fulfilling the demand to control undesired vibration effect. The aim of this study is to introduce the new design of damper for Malaysian vehicle model as well to evaluate its effectiveness in promoting comfort. The vibration isolation performance of the OEM damper featuring MR fluid was analysed physically under real road profile excitation experimentally. An experiment using quarter car rig suspension and LMS SCADAS Mobile was conducted to demonstrate the influence of current in controlling the characteristics of MR fluid in alter the damping behaviour under 5 cm bump impact. Subsequently, the displacement values were measured with respect to time. The new design OEM damper featuring MR fluid was validated by comparing the data with original equipment manufacturer (OEM) passive damper results under the same approach of testing. Comparison of numerical data of the new design OEM damper shown that it can reduce the excitation amplitude up to 40% compared to those obtained by OEM passive damper. Finally, the new design OEM damper featuring MR fluid has effectively isolated the disturbance from the road profile and control the output force.

Gender Differences in Figural Matrices: The Moderating Role of Item Design Features

Science.gov (United States)

Arendasy, Martin E.; Sommer, Markus

2012-01-01

There is a heated debate on whether observed gender differences in some figural matrices in adults can be attributed to gender differences in inductive reasoning/G[subscript f] or differential item functioning and/or test bias. Based on previous studies we hypothesized that three specific item design features moderate the effect size of the gender…

Safe bunker designing for the 18 MV Varian 2100 Clinac: a comparison between Monte Carlo simulation based upon data and new protocol recommendations.

Science.gov (United States)

Beigi, Manije; Afarande, Fatemeh; Ghiasi, Hosein

2016-01-01

The aim of this study was to compare two bunkers designed by only protocols recommendations and Monte Carlo (MC) based upon data derived for an 18 MV Varian 2100Clinac accelerator. High energy radiation therapy is associated with fast and thermal photoneutrons. Adequate shielding against the contaminant neutron has been recommended by IAEA and NCRP new protocols. The latest protocols released by the IAEA (safety report No. 47) and NCRP report No. 151 were used for the bunker designing calculations. MC method based upon data was also derived. Two bunkers using protocols and MC upon data were designed and discussed. From designed door's thickness, the door designed by the MC simulation and Wu-McGinley analytical method was closer in both BPE and lead thickness. In the case of the primary and secondary barriers, MC simulation resulted in 440.11 mm for the ordinary concrete, total concrete thickness of 1709 mm was required. Calculating the same parameters value with the recommended analytical methods resulted in 1762 mm for the required thickness using 445 mm as recommended by TVL for the concrete. Additionally, for the secondary barrier the thickness of 752.05 mm was obtained. Our results showed MC simulation and the followed protocols recommendations in dose calculation are in good agreement in the radiation contamination dose calculation. Difference between the two analytical and MC simulation methods revealed that the application of only one method for the bunker design may lead to underestimation or overestimation in dose and shielding calculations.

Main design and safety features of a 200MW nuclear heating reactor

International Nuclear Information System (INIS)

Zheng, Wenxiang; Gao, Zuying; Wang, Dazhong

1992-01-01

Inept has been in charge of the development of a nuclear heating reactor since 1980s, which is one of the national key R and D Programs in China. A 5MWt experimental NCR was completed at Inept in 1989 and has operated successfully for space heating since then. In order to realize the commercialization of the NCR, it has been decided to construct a 200MW demonstration NCR in 1993. A number of advanced features, including natural circulation, integrated arrangement, self-pressurized performance, dual vessel structure, hydraulic control rod drive and passive safety systems, have been incorporated into the NCR-200 to achieve its safety goal and economic viability. This makes the NCR safe, simple, reliable, easy-constructed and maintained. At present, the design work of the NCR-200 have shown that its safety characteristics are excellent. The NCR could play an important role in resolving future energy and environmental problems in China. The paper will mainly cover the key design considerations, main technical features and safety analysis results of the NCR-200

The selection of low-risk design guidelines for energetic events

International Nuclear Information System (INIS)

Fergusson, Donald; Marchaterre, John; Graham, John

1982-01-01

This paper recommends the establishment of specific design guidelines for protection against potential, but low probability, energetic events. These guidelines recognize the plant protective features incorporated to prevents such events, as well as the inherent capability of the plant to accommodate a certain level of energy release. Further, their application is recommended within the context of necessary standardized and agreed upon acceptance criteria which are less restrictive than ASME code requirements. The paper provides the background upon which the selection of the design is made, including the characterization of energetic events dependent on various core-design parameters, and including the necessity of a low-risk design balanced between prevention of accidents and the mitigation of consequences

Research design considerations for clinical studies of abuse-deterrent opioid analgesics: IMMPACT recommendations

Science.gov (United States)

Turk, Dennis C.; O’Connor, Alec B.; Dworkin, Robert H.; Chaudhry, Amina; Katz, Nathaniel P.; Adams, Edgar H.; Brownstein, John S.; Comer, Sandra D.; Dart, Richard; Dasgupta, Nabarun; Denisco, Richard A.; Klein, Michael; Leiderman, Deborah B.; Lubran, Robert; Rappaport, Bob A.; Zacny, James P.; Ahdieh, Harry; Burke, Laurie B.; Cowan, Penney; Jacobs, Petra; Malamut, Richard; Markman, John; Michna, Edward; Palmer, Pamela; Peirce-Sandner, Sarah; Potter, Jennifer S.; Raja, Srinivasa N.; Rauschkolb, Christine; Roland, Carl L.; Webster, Lynn R.; Weiss, Roger D.; Wolf, Kerry

2013-01-01

Opioids are essential to the management of pain in many patients, but they also are associated with potential risks for abuse, overdose, and diversion. A number of efforts have been devoted to the development of abuse-deterrent formulations of opioids to reduce these risks. This article summarizes a consensus meeting that was organized to propose recommendations for the types of clinical studies that can be used to assess the abuse deterrence of different opioid formulations. Due to the many types of individuals who may be exposed to opioids, an opioid formulation will need to be studied in several populations using various study designs in order to determine its abuse-deterrent capabilities. It is recommended that the research conducted to evaluate abuse deterrence should include studies assessing: (1) abuse liability; (2) the likelihood that opioid abusers will find methods to circumvent the deterrent properties of the formulation; (3) measures of misuse and abuse in randomized clinical trials involving pain patients with both low risk and high risk of abuse; and (4) post-marketing epidemiological studies. PMID:22770841

Analytical Features: A Knowledge-Based Approach to Audio Feature Generation

Directory of Open Access Journals (Sweden)

Pachet François

2009-01-01

Full Text Available We present a feature generation system designed to create audio features for supervised classification tasks. The main contribution to feature generation studies is the notion of analytical features (AFs, a construct designed to support the representation of knowledge about audio signal processing. We describe the most important aspects of AFs, in particular their dimensional type system, on which are based pattern-based random generators, heuristics, and rewriting rules. We show how AFs generalize or improve previous approaches used in feature generation. We report on several projects using AFs for difficult audio classification tasks, demonstrating their advantage over standard audio features. More generally, we propose analytical features as a paradigm to bring raw signals into the world of symbolic computation.

Key features of MIR.1200 (AES-2006) design and current stage of Leningrad NPP-2 construction

International Nuclear Information System (INIS)

Ivkov, Igor

2010-01-01

MIR.1200/AES-2006 is an abbreviated name of the evolving NPP design developed on the basis of the VVER-1000 Russian design with gross operation life of 480 reactor-years. This design is being implemented in four Units of Leningrad NPP-2 (LNPP-2. The AES-91/99 was used as reference during development of the AES-2006 design for LNPP-2; this design was implemented in two Units of Tianwan NPP (China). The main technical features of the MIR.1200/AES-2006 design include a double containment, four trains of active safety systems (4x100%, 4x50%), and special engineering measures for BDBA management (core catcher, H2 PARs, PHRS) based mainly on passive principles. The containment is described in detail, the main features in comparison with the reference NPP are outlined, the design layout principles are highlighted, the safety system structure and parameters are described. Attention is paid to the BDBA management system, hydrogen removal system, core catcher, and PHRS-SG and C-PHRS. (P.A.)

Definitions of engineered safety features and related features for nuclear power plants

International Nuclear Information System (INIS)

1986-01-01

In light water moderated, light water cooled nuclear power plants, definitions are given of engineered safety features which are designed to suppress or prevent dispersion of radioactive materials due to damage etc. of fuel at the times of power plant failures, and of related features which are designed to actuate or operate the engineered safety features. Contents are the following: scope of engineered safety features and of related features; classification of engineered safety features (direct systems and indirect systems) and of related features (auxiliaries, emergency power supply, and protective means). (Mori, K.)

Literature survey, numerical examples, and recommended design studies for main-coolant pumps. Final report

International Nuclear Information System (INIS)

Allaire, P.E.; Barrett, L.E.

1982-06-01

This report presents an up-to-date literature survey, examples of calculations of seal forces or other pump properties, and recommendations for future work pertaining to primary coolant pumps and primary recirculating pumps in the nuclear power industry. Five main areas are covered: pump impeller forces, fluid annuli, bearings, seals, and rotor calculations. The main conclusion is that forces in pump impellers is perhaps the least well understood area, seals have had some good design work done on them recently, fluid annuli effects are being discussed in the literature, bearing designs are fairly well known, and rotor calculations have been discussed widely in the literature. It should be noted, however, that usually the literature in a given area is not applied to pumps in nuclear power stations. The most immediate need for a combined theoretical and experimental design capability exists in mechanical face seals

Partition-based Collaborative Tensor Factorization for POI Recommendation

Institute of Scientific and Technical Information of China (English)

Wenjing Luan; Guanjun Liu; Changjun Jiang; Liang Qi

2017-01-01

The rapid development of location-based social networks (LBSNs) provides people with an opportunity of better understanding their mobility behavior which enables them to decide their next location.For example,it can help travelers to choose where to go next,or recommend salesmen the most potential places to deliver advertisements or sell products.In this paper,a method for recommending points of interest (POIs) is proposed based on a collaborative tensor factorization (CTF) technique.Firstly,a generalized objective function is constructed for collaboratively factorizing a tensor with several feature matrices.Secondly,a 3-mode tensor is used to model all users' check-in behaviors,and three feature matrices are extracted to characterize the time distribution,category distribution and POI correlation,respectively.Thirdly,each user's preference to a POI at a specific time can be estimated by using CTF.In order to further improve the recommendation accuracy,PCTF (Partitionbased CTF) is proposed to fill the missing entries of a tensor after clustering its every mode.Experiments on a real checkin database show that the proposed method can provide more accurate location recommendation.

Design Review Improvement Recommendations

Science.gov (United States)

2015-06-18

Worcester, Boeing Anne Ramsey, Harris Corporation Ronald H. Mandel, Lockheed Martin Mark King, Micropac Industries Melanie Berg, NASA Cindy...Peters, Raytheon Donna Potter , SSL ii Executive Summary The aerospace industry continues to experience design escapes that significantly impact

Upgradation of design features of primary coolant pumps of Indian 220 MWe PHWR

International Nuclear Information System (INIS)

Sharma, S.S.; Mhetre, S.G.; Manna, M.M.

1994-01-01

Evolution in the design features of Primary Coolant Pump (PCP) had started in fifties for catering to stringent specification requirements of reactor coolant systems of larger capacity reactors of various kinds. Primary coolant pumps of PWR and PHWR are employed for circulating radioactive, pressurized hot water in a circuit consisting of reactor (heat source) and steam generator (heat sink). As primary coolant pump capacity decides the station capacity, larger capacity primary coolant pumps have been evolved. Since primary coolant pump pressure containing parts are part of Primary Heat Transport system envelope, the parts are designed, manufactured, inspected and tested in accordance with the applicable system guidelines. Flywheel is mounted on the motor shaft for increasing mass moment of inertia of pump motor rotor to meet the coast down requirements of reactor cooling system under Class-IV electrical power supply failure. Due to limited accessibility of the PCP (PCP installed in shut down accessible area), quick maintenance, condition monitoring, reliable shaft seal system/bearing system aspects have been of great concern to reactor owners and pump manufacturers. In this paper upgradation of design features of RAPS, MAPS and NAPS primary coolant pumps have been covered. (author). 4 figs., 1 tab

Soft sensor design by multivariate fusion of image features and process measurements

DEFF Research Database (Denmark)

Lin, Bao; Jørgensen, Sten Bay

2011-01-01

This paper presents a multivariate data fusion procedure for design of dynamic soft sensors where suitably selected image features are combined with traditional process measurements to enhance the performance of data-driven soft sensors. A key issue of fusing multiple sensor data, i.e. to determine...... with a multivariate analysis technique from RGB pictures. The color information is also transformed to hue, saturation and intensity components. Both sets of image features are combined with traditional process measurements to obtain an inferential model by partial least squares (PLS) regression. A dynamic PLS model...... oxides (NOx) emission of cement kilns. On-site tests demonstrate improved performance over soft sensors based on conventional process measurements only....

Contexts in a Paper Recommendation System with Collaborative Filtering

Science.gov (United States)

Winoto, Pinata; Tang, Tiffany Ya; McCalla, Gordon

2012-01-01

Making personalized paper recommendations to users in an educational domain is not a trivial task of simply matching users' interests with a paper topic. Therefore, we proposed a context-aware multidimensional paper recommendation system that considers additional user and paper features. Earlier experiments on experienced graduate students…

Particular features of fire protection in nuclear power plants

International Nuclear Information System (INIS)

Krueger, W.

1985-01-01

The particular features of fire protection in nuclear power plants that are connected with the need to ensure nuclear and radiation safety even during an emergency are outlined followed by the recommendation to lay them down in special fire protection standards. These, in conjunction with comprehensive fire hazard analyses, could serve to work out complex concepts for the fire protection of individual nuclear power plants. Such concepts would be very useful for review and assessment of the fire protection design during the licensing process and for later inspections. (author)

RECOMMENDER SYSTEMS IN SOCIAL NETWORKS

Directory of Open Access Journals (Sweden)

Cleomar Valois Batista Jr

2011-12-01

Full Text Available The continued and diversified growth of social networks has changed the way in which users interact with them. With these changes, what once was limited to social contact is now used for exchanging ideas and opinions, creating the need for new features. Users have so much information at their fingertips that they are unable to process it by themselves; hence, the need to develop new tools. Recommender systems were developed to address this need and many techniques were used for different approaches to the problem. To make relevant recommendations, these systems use large sets of data, not taking the social network of the user into consideration. Developing a recommender system that takes into account the social network of the user is another way of tackling the problem. The purpose of this project is to use the theory of six degrees of separation (Watts 2003 amongst users of a social network to enhance existing recommender systems.

A Multi-Modality Deep Network for Cold-Start Recommendation

Directory of Open Access Journals (Sweden)

Mingxuan Sun

2018-03-01

Full Text Available Collaborative filtering (CF approaches, which provide recommendations based on ratings or purchase history, perform well for users and items with sufficient interactions. However, CF approaches suffer from the cold-start problem for users and items with few ratings. Hybrid recommender systems that combine collaborative filtering and content-based approaches have been proved as an effective way to alleviate the cold-start issue. Integrating contents from multiple heterogeneous data sources such as reviews and product images is challenging for two reasons. Firstly, mapping contents in different modalities from the original feature space to a joint lower-dimensional space is difficult since they have intrinsically different characteristics and statistical properties, such as sparse texts and dense images. Secondly, most algorithms only use content features as the prior knowledge to improve the estimation of user and item profiles but the ratings do not directly provide feedback to guide feature extraction. To tackle these challenges, we propose a tightly-coupled deep network model for fusing heterogeneous modalities, to avoid tedious feature extraction in specific domains, and to enable two-way information propagation from both content and rating information. Experiments on large-scale Amazon product data in book and movie domains demonstrate the effectiveness of the proposed model for cold-start recommendation.

Genetic Algorithm and Graph Theory Based Matrix Factorization Method for Online Friend Recommendation

Directory of Open Access Journals (Sweden)

Qu Li

2014-01-01

Full Text Available Online friend recommendation is a fast developing topic in web mining. In this paper, we used SVD matrix factorization to model user and item feature vector and used stochastic gradient descent to amend parameter and improve accuracy. To tackle cold start problem and data sparsity, we used KNN model to influence user feature vector. At the same time, we used graph theory to partition communities with fairly low time and space complexity. What is more, matrix factorization can combine online and offline recommendation. Experiments showed that the hybrid recommendation algorithm is able to recommend online friends with good accuracy.

Advanced social features in a recommendation system for process modeling

NARCIS (Netherlands)

Koschmider, A.; Song, M.S.; Reijers, H.A.; Abramowicz, W.

2009-01-01

Social software is known to stimulate the exchange and sharing of information among peers. This paper describes how an existing system that supports process builders in completing a business process can be enhanced with various social features. In that way, it is easier for process modeler to become

Recommender system based on scarce information mining.

Science.gov (United States)

Lu, Wei; Chung, Fu-Lai; Lai, Kunfeng; Zhang, Liang

2017-09-01

Guessing what user may like is now a typical interface for video recommendation. Nowadays, the highly popular user generated content sites provide various sources of information such as tags for recommendation tasks. Motivated by a real world online video recommendation problem, this work targets at the long tail phenomena of user behavior and the sparsity of item features. A personalized compound recommendation framework for online video recommendation called Dirichlet mixture probit model for information scarcity (DPIS) is hence proposed. Assuming that each clicking sample is generated from a representation of user preferences, DPIS models the sample level topic proportions as a multinomial item vector, and utilizes topical clustering on the user part for recommendation through a probit classifier. As demonstrated by the real-world application, the proposed DPIS achieves better performance in accuracy, perplexity as well as diversity in coverage than traditional methods. Copyright © 2017 Elsevier Ltd. All rights reserved.

Recommendations for research design and reporting in computer-assisted diagnosis to facilitate meta-analysis.

Science.gov (United States)

Eadie, Leila H; Taylor, Paul; Gibson, Adam P

2012-04-01

Computer-assisted diagnosis (CAD) describes a diverse, heterogeneous range of applications rather than a single entity. The aims and functions of CAD systems vary considerably and comparing studies and systems is challenging due to methodological and design differences. In addition, poor study quality and reporting can reduce the value of some publications. Meta-analyses of CAD are therefore difficult and may not provide reliable conclusions. Aiming to determine the major sources of heterogeneity and thereby what CAD researchers could change to allow this sort of assessment, this study reviews a sample of 147 papers concerning CAD used with imaging for cancer diagnosis. It discusses sources of variability, including the goal of the CAD system, learning methodology, study population, design, outcome measures, inclusion of radiologists, and study quality. Based upon this evidence, recommendations are made to help researchers optimize the quality and comparability of their trial design and reporting. Copyright © 2011 Elsevier Inc. All rights reserved.

Examining the Design Features of a Communication-Rich, Problem-Centred Mathematics Professional Development

Science.gov (United States)

de Araujo, Zandra; Orrill, Chandra Hawley; Jacobson, Erik

2018-01-01

While there is considerable scholarship describing principles for effective professional development, there have been few attempts to examine these principles in practice. In this paper, we identify and examine the particular design features of a mathematics professional development experience provided for middle grades teachers over 14 weeks. The…

NCBO Ontology Recommender 2.0: an enhanced approach for biomedical ontology recommendation.

Science.gov (United States)

Martínez-Romero, Marcos; Jonquet, Clement; O'Connor, Martin J; Graybeal, John; Pazos, Alejandro; Musen, Mark A

2017-06-07

Ontologies and controlled terminologies have become increasingly important in biomedical research. Researchers use ontologies to annotate their data with ontology terms, enabling better data integration and interoperability across disparate datasets. However, the number, variety and complexity of current biomedical ontologies make it cumbersome for researchers to determine which ones to reuse for their specific needs. To overcome this problem, in 2010 the National Center for Biomedical Ontology (NCBO) released the Ontology Recommender, which is a service that receives a biomedical text corpus or a list of keywords and suggests ontologies appropriate for referencing the indicated terms. We developed a new version of the NCBO Ontology Recommender. Called Ontology Recommender 2.0, it uses a novel recommendation approach that evaluates the relevance of an ontology to biomedical text data according to four different criteria: (1) the extent to which the ontology covers the input data; (2) the acceptance of the ontology in the biomedical community; (3) the level of detail of the ontology classes that cover the input data; and (4) the specialization of the ontology to the domain of the input data. Our evaluation shows that the enhanced recommender provides higher quality suggestions than the original approach, providing better coverage of the input data, more detailed information about their concepts, increased specialization for the domain of the input data, and greater acceptance and use in the community. In addition, it provides users with more explanatory information, along with suggestions of not only individual ontologies but also groups of ontologies to use together. It also can be customized to fit the needs of different ontology recommendation scenarios. Ontology Recommender 2.0 suggests relevant ontologies for annotating biomedical text data. It combines the strengths of its predecessor with a range of adjustments and new features that improve its reliability

Design-Based Comparison of Spine Surgery Simulators: Optimizing Educational Features of Surgical Simulators.

Science.gov (United States)

Ryu, Won Hyung A; Mostafa, Ahmed E; Dharampal, Navjit; Sharlin, Ehud; Kopp, Gail; Jacobs, W Bradley; Hurlbert, R John; Chan, Sonny; Sutherland, Garnette R

2017-10-01

Simulation-based education has made its entry into surgical residency training, particularly as an adjunct to hands-on clinical experience. However, one of the ongoing challenges to wide adoption is the capacity of simulators to incorporate educational features required for effective learning. The aim of this study was to identify strengths and limitations of spine simulators to characterize design elements that are essential in enhancing resident education. We performed a mixed qualitative and quantitative cohort study with a focused survey and interviews of stakeholders in spine surgery pertaining to their experiences on 3 spine simulators. Ten participants were recruited spanning all levels of training and expertise until qualitative analysis reached saturation of themes. Participants were asked to perform lumbar pedicle screw insertion on 3 simulators. Afterward, a 10-item survey was administrated and a focused interview was conducted to explore topics pertaining to the design features of the simulators. Overall impressions of the simulators were positive with regards to their educational benefit, but our qualitative analysis revealed differing strengths and limitations. Main design strengths of the computer-based simulators were incorporation of procedural guidance and provision of performance feedback. The synthetic model excelled in achieving more realistic haptic feedback and incorporating use of actual surgical tools. Stakeholders from trainees to experts acknowledge the growing role of simulation-based education in spine surgery. However, different simulation modalities have varying design elements that augment learning in distinct ways. Characterization of these design characteristics will allow for standardization of simulation curricula in spinal surgery, optimizing educational benefit. Copyright © 2017 Elsevier Inc. All rights reserved.

An Unrecognized Rash Progressing to Lyme Carditis: Important Features and Recommendations Regarding Lyme Disease.

Science.gov (United States)

Lee, Shawn; Singla, Montish

2016-01-01

We present a case report of 46-year-old man with no medical history, who complained of extreme fatigue, near-syncope, and palpitations. He initially presented in complete heart block. A transvenous pacemaker was placed in the emergency department, and he was started empirically on Ceftriaxone for Lyme disease. He was admitted and over the course of the next few days, his rhythm regressed to Mobitz type I first-degree atrioventricular block and then to normal sinus rhythm. This case report highlights some important features regarding Lyme carditis, a rare presentation of early disseminated Lyme disease (seen in a few weeks to months after the initial tick bite). In 25%-30% of patients, the characteristic targetoid rash may not be seen, a likely culprit of the disease not being detected early and progressing to disseminated disease. The most common cardiac complaint of Lyme disease is palpitations, occurring in 6.6% of patients, which may not accurately reflect progression into disseminated Lyme disease because it is a nonspecific finding. Conduction abnormality, occurring in 1.8% of patients, is a more specific finding of Borrelia invading cardiac tissue. Finally, this case report highlights a recommendation that patients with confirmed Lyme disease or those presenting with cardiac abnormalities or symptoms who have an atypical profile for a cardiac event should be screened with a 12-lead electrocardiogram, Lyme serology, and be considered for antibiotic therapy with the possibility of temporary pacing.

Design features and operating characteristics of the MC-50 cyclotron

International Nuclear Information System (INIS)

Bak, Hae Ill; Bak, Joo Shik

1989-01-01

The MC-50 cyclotron at Korean Cancer Center Hospital is now operational for neutron therapy and medical radioisotope production. Design features, mechanical structures and operating characteristics of the MC-50 are described in this paper. Optimum operating condition for this cyclotron has been determined by the repetitive running, and the performances of the internal beam have been investigated through the measurements of intensity and spatial distribution of the internal beam as a function of the radius of the cyclotron. Routinely, the 40 μA of 50 MeV protons have been obtained at first Faraday cup with a extraction efficiency of 61%. (Author)

ALWR safety approaches and trends. Implementation of passive safety features in the design

Energy Technology Data Exchange (ETDEWEB)

Ignatiev, V

1995-11-01

Reactor vendors world-wide are examining various advanced light water reactors (ALWR) options to reach utility goals. The amount of information available about each design varies essentially depending on its maturity. Some advanced reactor designs are the evolutionary results of combining old structures, systems and components in new ways, others use innovative solutions. A summary review is given for better understanding of new ALWR design trends and approaches in different countries and subsequent R and D activities. An attempt was made to describe and assess specific innovative and passive features implemented in the leading ALWR designs for further plant design safety improvements. The advantages and disadvantages of these innovations in obtaining reliable systems have been considered. Also, this report indicates the importance of uncertainties remaining and identifies the additional work needed. 51 refs, 27 figs, 7 tabs.

ALWR safety approaches and trends. Implementation of passive safety features in the design

International Nuclear Information System (INIS)

Ignatiev, V.

1995-11-01

Reactor vendors world-wide are examining various advanced light water reactors (ALWR) options to reach utility goals. The amount of information available about each design varies essentially depending on its maturity. Some advanced reactor designs are the evolutionary results of combining old structures, systems and components in new ways, others use innovative solutions. A summary review is given for better understanding of new ALWR design trends and approaches in different countries and subsequent R and D activities. An attempt was made to describe and assess specific innovative and passive features implemented in the leading ALWR designs for further plant design safety improvements. The advantages and disadvantages of these innovations in obtaining reliable systems have been considered. Also, this report indicates the importance of uncertainties remaining and identifies the additional work needed. 51 refs, 27 figs, 7 tabs

Data-driven technology for engineering systems health management design approach, feature construction, fault diagnosis, prognosis, fusion and decisions

CERN Document Server

Niu, Gang

2017-01-01

This book introduces condition-based maintenance (CBM)/data-driven prognostics and health management (PHM) in detail, first explaining the PHM design approach from a systems engineering perspective, then summarizing and elaborating on the data-driven methodology for feature construction, as well as feature-based fault diagnosis and prognosis. The book includes a wealth of illustrations and tables to help explain the algorithms, as well as practical examples showing how to use this tool to solve situations for which analytic solutions are poorly suited. It equips readers to apply the concepts discussed in order to analyze and solve a variety of problems in PHM system design, feature construction, fault diagnosis and prognosis.

Expanding Learning and Social Interaction through Intelligent Systems Design: Implementing a Reputation and Recommender System for the Claremont Conversation Online

Science.gov (United States)

Thoms, Brian

2009-01-01

In this dissertation I examine the design, construction and implementation of an online blog ratings and user recommender system for the Claremont Conversation Online (CCO). In line with constructivist learning models and practical information systems (IS) design, I implemented a blog ratings system (a system that can be extended to allow for…

Recommender Systems for Learning

CERN Document Server

Manouselis, Nikos; Verbert, Katrien; Duval, Erik

2013-01-01

Technology enhanced learning (TEL) aims to design, develop and test sociotechnical innovations that will support and enhance learning practices of both individuals and organisations. It is therefore an application domain that generally covers technologies that support all forms of teaching and learning activities. Since information retrieval (in terms of searching for relevant learning resources to support teachers or learners) is a pivotal activity in TEL, the deployment of recommender systems has attracted increased interest. This brief attempts to provide an introduction to recommender systems for TEL settings, as well as to highlight their particularities compared to recommender systems for other application domains.

Lessons learned from IDeAl - 33 recommendations from the IDeAl-net about design and analysis of small population clinical trials.

Science.gov (United States)

Hilgers, Ralf-Dieter; Bogdan, Malgorzata; Burman, Carl-Fredrik; Dette, Holger; Karlsson, Mats; König, Franz; Male, Christoph; Mentré, France; Molenberghs, Geert; Senn, Stephen

2018-05-11

IDeAl (Integrated designs and analysis of small population clinical trials) is an EU funded project developing new statistical design and analysis methodologies for clinical trials in small population groups. Here we provide an overview of IDeAl findings and give recommendations to applied researchers. The description of the findings is broken down by the nine scientific IDeAl work packages and summarizes results from the project's more than 60 publications to date in peer reviewed journals. In addition, we applied text mining to evaluate the publications and the IDeAl work packages' output in relation to the design and analysis terms derived from in the IRDiRC task force report on small population clinical trials. The results are summarized, describing the developments from an applied viewpoint. The main result presented here are 33 practical recommendations drawn from the work, giving researchers a comprehensive guidance to the improved methodology. In particular, the findings will help design and analyse efficient clinical trials in rare diseases with limited number of patients available. We developed a network representation relating the hot topics developed by the IRDiRC task force on small population clinical trials to IDeAl's work as well as relating important methodologies by IDeAl's definition necessary to consider in design and analysis of small-population clinical trials. These network representation establish a new perspective on design and analysis of small-population clinical trials. IDeAl has provided a huge number of options to refine the statistical methodology for small-population clinical trials from various perspectives. A total of 33 recommendations developed and related to the work packages help the researcher to design small population clinical trial. The route to improvements is displayed in IDeAl-network representing important statistical methodological skills necessary to design and analysis of small-population clinical trials. The methods

Requirements for Semantic Educational Recommender Systems in Formal E-Learning Scenarios

OpenAIRE

Jesus G. Boticario; Olga C. Santos

2011-01-01

This paper analyzes how recommender systems can be applied to current e-learning systems to guide learners in personalized inclusive e-learning scenarios. Recommendations can be used to overcome current limitations of learning management systems in providing personalization and accessibility features. Recommenders can take advantage of standards-based solutions to provide inclusive support. To this end we have identified the need for developing semantic educational recommender systems, which ...

Improved safety features in the design of Alto Lazio NPP

International Nuclear Information System (INIS)

Bava, G.; Cianciolo, T.; Del Nero, G.

1988-01-01

The ALTO LAZIO Nuclear Power Plant, two 1000Mwe units, is a BWR 6/MARK III located about 100 km north of Rome, on the Tyrrhenian Sea Coasts. The construction of the plant started in 1978, but it has recently been stopped by a Government decision following a national referendum, when the units were about 70% completed. This paper is mainly intended to illustrate the major safety features which have been implemented as result of specific requirements issued by the safety authority (ENEA DISP) during the construction permit stage or the subsequent licensing process. One of the tools used to identify the need for design modifications has been a comprehensive reliability analysis of safety system: in the paper the methods used and the major results obtained by this study are briefly presented. Also, the approach used in the investigation of severe accidents and major applications in the area of plant design and emergency procedures are briefly discussed; furthermore the trend toward a simpler mitigation concept is described

Design and test performance of the ATLAS Feature Extractor trigger boards for the Phase-I Upgrade

CERN Document Server

Qian, Weiming; The ATLAS collaboration

2016-01-01

In Run 3, the ATLAS Level-1 Calorimeter Trigger will be augmented by an Electron Feature Extractor (eFEX), to identify isolated e/g and t particles, and a Jet Feature Extractor (jFEX), to identify energetic jets and calculate various local energy sums. Each module accommodates more than 420 differential signals that can operate at up to 12.8 Gb/s, some routed over 20 cm between FPGAs. Presented here are the module designs, the processes that have been adopted to meet the challenges associated with multi-Gb/s PCB design, and the results of tests that characterise the performance of these modules.

Design and test performance of the ATLAS Feature Extractor trigger boards for the Phase-1 Upgrade

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00222228; The ATLAS collaboration

2017-01-01

In Run 3, the ATLAS Level-1 Calorimeter Trigger will be augmented by an Electron Feature Extractor (eFEX), to identify isolated e/g and particles, and a Jet Feature Extractor (jFEX), to identify energetic jets and calculate various local energy sums. Each module accommodates more than 450 differential signals that can operate at up to 12.8 Gb/s, some of which are routed over 30 cm between FPGAs. Presented here are the module designs, the processes that have been adopted to meet the challenges associated with multi-Gb/s PCB design, and the results of tests that characterize the performance of these modules.

Solid propellant processing factor in rocket motor design

Science.gov (United States)

1971-01-01

The ways are described by which propellant processing is affected by choices made in designing rocket engines. Tradeoff studies, design proof or scaleup studies, and special design features are presented that are required to obtain high product quality, and optimum processing costs. Processing is considered to include the operational steps involved with the lining and preparation of the motor case for the grain; the procurement of propellant raw materials; and propellant mixing, casting or extrusion, curing, machining, and finishing. The design criteria, recommended practices, and propellant formulations are included.

Interactive Spacecraft Trajectory Design Strategies Featuring Poincare Map Topology

Science.gov (United States)

Schlei, Wayne R.

Space exploration efforts are shifting towards inexpensive and more agile vehicles. Versatility regarding spacecraft trajectories refers to the agility to correct deviations from an intended path or even the ability to adapt the future path to a new destination--all with limited spaceflight resources (i.e., small DeltaV budgets). Trajectory design methods for such nimble vehicles incorporate equally versatile procedures that allow for rapid and interactive decision making while attempting to reduce Delta V budgets, leading to a versatile trajectory design platform. A versatile design paradigm requires the exploitation of Poincare map topology , or the interconnected web of dynamical structures, existing within the chaotic dynamics of multi-body gravitational models to outline low-Delta V transfer options residing nearby to a current path. This investigation details an autonomous procedure to extract the periodic orbits (topology nodes) and correlated asymptotic flow structures (or the invariant manifolds representing topology links). The autonomous process summarized in this investigation (termed PMATE) overcomes discontinuities on the Poincare section that arise in the applied multi-body model (the planar circular restricted three-body problem) and detects a wide variety of novel periodic orbits. New interactive capabilities deliver a visual analytics foundation for versatile spaceflight design, especially for initial guess generation and manipulation. Such interactive strategies include the selection of states and arcs from Poincare section visualizations and the capabilities to draw and drag trajectories to remove dependency on initial state input. Furthermore, immersive selection is expanded to cull invariant manifold structures, yielding low-DeltaV or even DeltaV-free transfers between periodic orbits. The application of interactive design strategies featuring a dense extraction of Poincare map topology is demonstrated for agile spaceflight with a simple

Design Features of the SMART Water Chemistry

International Nuclear Information System (INIS)

Byung Seon Choi; Seong Hoon Kim; Juhyeon Yoon; Doo Jeong Lee; Yoon Yeong Bae; Sung Kyun Zee

2004-01-01

The design features for the primary water chemistry for the SMART are introduced from the viewpoint of the system characteristics and the chemical design concept. The most essential differences in water chemistry between the commercially operating PWRs and SMART are characterized by the presence of boron in the water and the operating mode of the purification system. SMART is a soluble boron free reactor, and the ammonia is used as a pH reagent. The material for SMART steam generator is also different from the standard material of the commercially operating PWRs: titanium alloy for the steam generator tubes. In SMART hydrogen gas which suppresses a generation of oxidizing species by the radiolysis processes in the reactors is not added to the primary coolant, but is normally generated from the radiolysis of the ammonia as the coolant passes through the core. Ammonia is added once per shift because SMART reactor has no letdown and charging system during power operation. Because of these competing processes, the concentrations of hydrogen, nitrogen and ammonia in the primary coolant are in equilibrium, which depend on the decomposition and/or combination rate of the ammonia. The level of permissible oxygen concentration in the primary coolant can be ensured by both suppression of the water radiolysis through maintaining a high enough hydrogen concentration in the primary coolant and by a restriction of the oxygen ingress into the primary coolant with the makeup water. The ammonia chemistry in SMART reactor eliminates the need for hydrogen injection for the control of the dissolved oxygen in the primary coolant because of spontaneous generation of hydrogen and nitrogen produced by the reaction of the ammonia decomposition. (authors)

Recommendation System of Program Based on REST Style

Directory of Open Access Journals (Sweden)

Song Jin Bao

2016-01-01

Full Text Available With the popularity of digital TV, TV programs have been on the increase no matter in both the number and species, which brought many choice to the users. Although the digital TV has increased largely in the selectivity, it has become a fussy process that users search for programs which they are interested in. So there is need to have an efficient program recommendation system to solve the problem that is “information overload” for users. It can not only help users to get the program which they require, but also bring convenience to people’s life. The program recommendation system named MyView is planned and designed, aimed to providing an efficient information platform. The system also involves intelligent recommendation. The information guide will trigger the recommendation engine after users registering information, the engine will accord to the data in the guide information to make the personalized program recommendation. The system was deployed in the Tomcat and Apache integration servers on my localhost, so it also belongs to the Web application based on J2EE platform. AJAX is used that can achieve a good user experience to develop web presentation layer on MyView PC browser with flexible interface performance. The background of business services uses the hierarchical form. MyView System uses the CXF framework and Hibernate to equip controller and data persistence layer in the Spring container. The overall framework of the system uses the REST style, in order to extend the performance and function later. Background service layer with uniform interface, marked by the URI resource. At the same time, HTTP requestion is submitted by the AJAX to obtain services provided by resources. Finally, we can analyze and summary the features of MyView System.

Web Interface Design Principles for Adults’ Self-Directed Learning

Directory of Open Access Journals (Sweden)

Mehmet FIRAT

2016-10-01

Full Text Available One of the most important features which e-learning tools and environments must possess within the scope of lifelong learning is self-directed learning, which can be considered as a form of self-learning. The aim of this study was to determine, based on the views and recommendations of experts, interface design principles for the development of educational web interfaces that will support the self-directed learning of adults. This descriptive study was conducted with the contribution of 12 academicians specializing in interface design and self-directed learning. Within the scope of the study, new interfaces features were identified based on an evaluation of the literature on interface designs for self-directed learning, and the views of subject experts. Based on the study results, it was determined that interface designs supporting self-directed learning must possess five basic features, which include being user-directed, ensuring variety, being supported by learning analytics, being motivational, and being sharing-oriented.

A Personalized Word of Mouth Recommender Model

OpenAIRE

Chihli Hung

2008-01-01

Word of mouth (WOM) has a powerful effect on consumer behavior. Manually collecting WOM is very time-consuming in the era of the Internet. An automatic WOM recommender model is useful for both marketers and consumers. There are many different product features and thus many consumer choices. Each individual consumer has different preferences and these preferences may be changed deliberately or unwittingly. However, most existing WOM recommender models do not adapt to user preferences. This stu...

Design features of the KSTAR in-vessel control coils

Energy Technology Data Exchange (ETDEWEB)

Kim, H.K. [National Fusion Research Institute (NFRI), 52 Yeoeun-dong, Yusung-ku, Daejeon, 305-333 (Korea, Republic of)], E-mail: hkkim@nfri.re.kr; Yang, H.L.; Kim, G.H.; Kim, Jin-Yong; Jhang, Hogun; Bak, J.S.; Lee, G.S. [National Fusion Research Institute (NFRI), 52 Yeoeun-dong, Yusung-ku, Daejeon, 305-333 (Korea, Republic of)

2009-06-15

In-vessel control coils (IVCCs) are to be used for the fast plasma position control, field error correction (FEC), and resistive wall mode (RWM) stabilization for the Korea Superconducting Tokamak Advanced Research (KSTAR) device. The IVCC system comprises 16 segments to be unified into a single set to achieve following remarkable engineering advantages; (1) enhancement of the coil system reliability with no welding or brazing works inside the vacuum vessel, (2) simplification in fabrication and installation owing to coils being fabricated outside the vacuum vessel and installed after device assembly, and (3) easy repair and maintenance of the coil system. Each segment is designed in 8 turns coil of 32 mm x 15 mm rectangular oxygen free high conductive copper with a 7 mm diameter internal coolant hole. The conductors are enclosed in 2 mm thick Inconel 625 rectangular welded vacuum jacket with epoxy/glass insulation. Structural analyses were implemented to evaluate structural safety against electromagnetic loads acting on the IVCC for the various operation scenarios using finite element analysis. This paper describes the design features and structural analysis results of the KSTAR in-vessel control coils.

A Flexible Electronic Commerce Recommendation System

Science.gov (United States)

Gong, Songjie

Recommendation systems have become very popular in E-commerce websites. Many of the largest commerce websites are already using recommender technologies to help their customers find products to purchase. An electronic commerce recommendation system learns from a customer and recommends products that the customer will find most valuable from among the available products. But most recommendation methods are hard-wired into the system and they support only fixed recommendations. This paper presented a framework of flexible electronic commerce recommendation system. The framework is composed by user model interface, recommendation engine, recommendation strategy model, recommendation technology group, user interest model and database interface. In the recommender strategy model, the method can be collaborative filtering, content-based filtering, mining associate rules method, knowledge-based filtering method or the mixed method. The system mapped the implementation and demand through strategy model, and the whole system would be design as standard parts to adapt to the change of the recommendation strategy.

Development of Draft Regulatory Guide on Accident Analysis for Nuclear Power Plants with New Safety Design Features

Energy Technology Data Exchange (ETDEWEB)

Bang, Young Seok; Woo, Sweng Woong; Hwang, Tae Suk [KINS, Daejeon (Korea, Republic of); Sim, Suk K; Hwang, Min Jeong [Environment and Energy Technology, Daejeon (Korea, Republic of)

2016-05-15

The present paper discusses the development process of the draft version of regulatory guide (DRG) on accident analysis of the NPP having the NSFD and its result. Based on the consideration on the lesson learned from the previous licensing review, a draft regulatory guide (DRG) on accident analysis for NPP with new safety design features (NSDF) was developed. New safety design features (NSDF) have been introduced to the new constructing nuclear power plants (NPP) since the early 2000 and the issuance of construction permit of SKN Units 3 and 4. Typical examples of the new safety features includes Fluidic Device (FD) within Safety Injection Tanks (SIT), Passive Auxiliary Feedwater System (PAFS), ECCS Core Barrel Duct (ECBD) which were adopted in APR1400 design and/or APR+ design to improve the safety margin of the plants for the postulated accidents of interest. Also several studies of new concept of the safety system such as Hybrid ECCS design have been reported. General and/or specific guideline of accident analysis considering the NSDF has been requested. Realistic evaluation of the impact of NSDF on accident with uncertainty and separated accident analysis accounting the NSDF impact were specified in the DRG. Per the developmental process, identification of key issues, demonstration of the DRG with specific accident with specific NSDF, and improvement of DGR for the key issues and their resolution will be conducted.

Design features of the Light Water Breeder Reactor (LWBR) which improve fuel utilization in light water reactors (LWBR development program)

International Nuclear Information System (INIS)

Hecker, H.C.; Freeman, L.B.

1981-08-01

This report surveys reactor core design features of the Light Water Breeder Reactor which make possible improved fuel utilization in light water reactor systems and breeding with the uranium-thorium fuel cycle. The impact of developing the uranium-thorium fuel cycle on utilization of nuclear fuel resources is discussed. The specific core design features related to improved fuel utilization and breeding which have been implemented in the Shippingport LWBR core are presented. These design features include a seed-blanket module with movable fuel for reactivity control, radial and axial reflcetor regions, low hafnium Zircaloy for fuel element cladding and structurals, and a closely spaced fuel rod lattice. Also included is a discussion of several design modifications which could further improve fuel utilization in future light water reactor systems. These include further development of movable fuel control, use of Zircaloy fuel rod support grids, and fuel element design modifications

Study of In-Pile test facility for fast reactor safety research: performance requirements and design features

Energy Technology Data Exchange (ETDEWEB)

Nonaka, N.; Kawatta, N.; Niwa, H.; Kondo, S.; Maeda, K

1996-12-31

This paper describes a program and the main design features of a new in-pile safety facility SERAPH planned for future fast reactor safety research. The current status of R and D on technical developments in relation to the research objectives and performance requirements to the facility design is given.

Enhanced Design Alternative I: Low Temperature Design

International Nuclear Information System (INIS)

MacNeil, K.

1999-01-01

The purpose of this document is to evaluate Enhanced Design Alternative (EDA) 1, the low temperature repository design concept (CRWMS M and O 1999a). This technical document will provide supporting information for Site Recommendation (SR) and License Application (LA). Preparation of this evaluation will be in accordance with the technical document preparation plan (TDPP), (CRWMS M and O 1999b). EDA 1, one of five EDAs, was evolved from evaluation of a series of design features and alternatives developed during the first phase of the License Application Design Selection (LADS) process. Low, medium, and high temperature concepts were developed from the design features and alternatives prepared during Phase 1 of the LADS effort (CRWMS M and O 1999a). EDA 1 will first be evaluated against a single Screening Criterion, outlined in CRWMS M and O 1999a, which addresses post-closure performance of the repository. The performance of the repository is defined quantitatively as the peak radiological dose rate to an average individual of a critical group at a distance of 20 km from the repository site within 10,000 years. To satisfy this criterion the peak dose rate must not exceed the anticipated regulatory level of 25 mrem/yr within 10,000 years. If the EDA meets the screening criterion, the EDA will be further evaluated against the LADS Phase 2 Evaluation Criteria contained in CRWMS M and O 1999a

Development of advanced design features for KNGR reactor vessel and internals

Energy Technology Data Exchange (ETDEWEB)

Park, Jong Kyun; Ru, Bong; Lee, Jae Han; Lee, Hyung Yeon; Kim, Jong Bum; Ku, Kyung Heoy; Lee, Ki Young; Lee, Jun; Kim, Young In [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1995-12-01

Developments of KNGR design require to enhance the design to implement the design requirements, such as plant life time from 40 years to 60 years, safety, performance and structure and components design. The designs used for existing nuclear power plants should be modified or improved to meet the requirements in KNGR design. The purpose of the task is to develop the Advanced Design Features (ADF) related to mechanical and structural design for KNGR reactor vessel and reactor internals. The structural integrity for the System 80+ reactor vessel, of which design life is 60 years, was reviewed. EPRI-URD, CESSAR-DC, and the present design status and characteristics of System 80+ reactor vessel were comparatively studied and the improvement of reactor vessel surveillance program was investigated. The performance and aseismic characteristics of the CE-type CEDM, which will be used in System 80+, are investigated. The driving cycles of CEDM are evaluated for the load follow operation(LFO), of which Mode K is being developed by KAERI. The position of the USNRC, EPRI, ABB-CE, and industries on the elimination of OBE are reviewed, and especially ABB-CE System 80+ FSER is reviewed in detail. For the pre-stage of the verification of the OBE elimination from the design, the review of the seismic responses, i.e.. shear forces and moments, of YGN 3/4 RI was performed and the ratio of OBE response to SSE response was analysed. The screening criteria were reviewed to evaluate the integrity against pressurized thermal shock (PTS) for RV belt-line of System 80+. The evaluation methods for fracture integrity when screening criteria are not met were reviewed. The structural characteristics of IRWST spargers of System 80+ were investigated and the effect of hydrodynamic loads on NSSS was reviewed. 18 figs., 9 tabs., 40 refs. (Author) .new.

Development of advanced design features for KNGR reactor vessel and internals

International Nuclear Information System (INIS)

Park, Jong Kyun; Ru, Bong; Lee, Jae Han; Lee, Hyung Yeon; Kim, Jong Bum; Ku, Kyung Heoy; Lee, Ki Young; Lee, Jun; Kim, Young In

1995-12-01

Developments of KNGR design require to enhance the design to implement the design requirements, such as plant life time from 40 years to 60 years, safety, performance and structure and components design. The designs used for existing nuclear power plants should be modified or improved to meet the requirements in KNGR design. The purpose of the task is to develop the Advanced Design Features (ADF) related to mechanical and structural design for KNGR reactor vessel and reactor internals. The structural integrity for the System 80+ reactor vessel, of which design life is 60 years, was reviewed. EPRI-URD, CESSAR-DC, and the present design status and characteristics of System 80+ reactor vessel were comparatively studied and the improvement of reactor vessel surveillance program was investigated. The performance and aseismic characteristics of the CE-type CEDM, which will be used in System 80+, are investigated. The driving cycles of CEDM are evaluated for the load follow operation(LFO), of which Mode K is being developed by KAERI. The position of the USNRC, EPRI, ABB-CE, and industries on the elimination of OBE are reviewed, and especially ABB-CE System 80+ FSER is reviewed in detail. For the pre-stage of the verification of the OBE elimination from the design, the review of the seismic responses, i.e.. shear forces and moments, of YGN 3/4 RI was performed and the ratio of OBE response to SSE response was analysed. The screening criteria were reviewed to evaluate the integrity against pressurized thermal shock (PTS) for RV belt-line of System 80+. The evaluation methods for fracture integrity when screening criteria are not met were reviewed. The structural characteristics of IRWST spargers of System 80+ were investigated and the effect of hydrodynamic loads on NSSS was reviewed. 18 figs., 9 tabs., 40 refs. (Author) .new

Important changes in medical x-ray imaging facility shielding design methodology. A brief summary of recommendations in NCRP Report No. 147

International Nuclear Information System (INIS)

Archer, Benjamin R.; Gray, Joel E.

2005-01-01

The recently published Report No. 147 of The National Council on Radiation Protection and Measurements entitled 'Structural shielding design for medical x-ray imaging facilities' provides an update of shielding recommendations for x rays used for medical imaging. The goal of this report is to ensure that the shielding in these facilities limits radiation exposures to employees and members of the public to acceptable levels. Board certified medical and health physicists, as defined in this report, are the 'qualified experts' who are competent to design radiation shielding for these facilities. As such, physicists must be aware of the new technical information and the changes from previous reports that Report No. 147 supersedes. In this article we summarize the new data, models and recommendations for the design of radiation barriers in medical imaging facilities that are presented in Report No. 147

How do different cigarette design features influence the standard tar yields of popular cigarette brands sold in different countries?

Science.gov (United States)

O'Connor, R J; Hammond, D; McNeill, A; King, B; Kozlowski, L T; Giovino, G A; Cummings, K M

2008-09-01

To examine the associations among cigarette design features and tar yields of leading cigarette brands sold in the United States, Canada, Australia and the United Kingdom. Government reports and numbers listed on packs were used to obtain data on International Organization for Standardization (ISO)/Federal Trade Commission (FTC) yields for the tar of 172 cigarette varieties sold in the United States, Canada, Australia and the United Kingdom. We used standardised methods to measure the following 11 cigarette design parameters: filter ventilation, cigarette pressure drop, filter pressure drop, tobacco rod length, filter length, cigarette diameter, tipping paper length, tobacco weight, filter weight, rod density and filter density. Filter ventilation was found to be the predominant design feature accounting for the variations between brands in ISO/FTC tar yields in each of the four countries. After accounting for filter ventilation, design parameters such as overwrap length, tobacco weight and rod density played comparatively minor roles in determining tar yields. Variation in ISO/FTC tar yields are predicted by a limited set of cigarette design features, especially filter ventilation, suggesting that governments should consider mandatory disclosure of cigarette design parameters as part of comprehensive tobacco product regulations.

Design features of ACR in severe accident mitigation

International Nuclear Information System (INIS)

Shapiro, H.; Krishnan, V.S.; Santamaura, P.; Lekakh, B.; Blahnik, C.

2007-01-01

New reactor designs require the evaluation of design alternatives to reduce the radiological risk by preventing severe accidents or by limiting releases from the plant in the event of such accidents. The Advanced CANDU Reactor TM (ACR TM ) design has provisions to prevent and mitigate severe accidents. This paper describes key ACR design features for severe accident mitigation. It provides a high-level overview of the findings to date. Several design provisions have not yet been finalized or decided, but the designers are keenly aware of the SAM concepts and their requirements. The active heat sinks for 'vessels' (i.e., the fuel channels, the calandria vessel, the calandria end-shields and the calandria vault) are all amply capable of dissipating the severe accident heat loads. These heat sinks are designed to be operable under severe accident environmental conditions; however, their operability is yet to be confirmed by assessments. The active heat sinks for the various process vessels are 'backed up' by passive heat sinks (i.e., steaming plus water make-up from the RWS). The supply side of passive heat sinks is simple, rugged, and not vulnerable to failures of plant systems. The importance of the steam relief side is recognized, and the adequate relief capacity will be provided. The passive heat sinks will give the SAM more than 1 day (likely several days) to diagnose the accident and to establish the ultimate heat sinks. The spray system for containment pressure suppression is designed for high reliability and has ample capacity to ensure low containment leakage without external intervention, after which time alternative supply to the sprays can be brought on line manually. The sprays are backed up by the LACs which are assessed for operability following a severe accident. The strong ACR containment will provide a long time of completely passive protection for any severe accident at decay power. Its characteristics are not prone to catastrophic failures. The

Advanced energy design and operation technologies research: Recommendations for a US Department of Energy multiyear program plan

Energy Technology Data Exchange (ETDEWEB)

Brambley, M.R.; Crawley, D.B.; Hostetler, D.D.; Stratton, R.C.; Addision, M.S.; Deringer, J.J.; Hall, J.D.; Selkowitz, S.E.

1988-12-01

This document describes recommendations for a multiyear plan developed for the US Department of Energy (DOE) as part of the Advanced Energy Design and Operation Technologies (AEDOT) project. The plan is an outgrowth of earlier planning activities conducted for DOE as part of design process research under the Building System Integration Program (BSIP). The proposed research will produce intelligent computer-based design and operation technologies for commercial buildings. In this document, the concept is explained, the need for these new computer-based environments is discussed, the benefits are described, and a plan for developing the AEDOT technologies is presented for the 9-year period beginning FY 1989. 45 refs., 37 figs., 9 tabs.

Specific features of designs of superconducting magnets for high-energy synchrotrons

International Nuclear Information System (INIS)

Monoszon, N.A.

1979-01-01

Distinctive features of designs of synchrotron superconducting magnetic systems (SMS) are considered. Some results of testing the prototypes of the ISABELLE storage ring magnets, the DABLER energy doubler and the accelerating-storage complex project are presented. Designs of di.ooles and quadrupoles are described. It is shown that the design of the DABLER SMS considerably differs from the ISABELLE SMS. The DABLER uses nonsaturated magnetic screens which provide lesser distortions of the magnetic field distribution. For the ISABELLE project a dipole with a two-layer winding has been developed which produced a field of 6.2 T. Magnetization curves as well as training and field distribution curves for a number of DABLER dipoles are presented. To prevent local overheating provision is made for using a heater enclosed in a winding. A 1 m dipole model with a sector winding of the DABLER type has been manufactured and tested in the IHEP. During tests a short-sample current and a total value of calculated field equal to 4.45 T in the chamber centre amd 5.3 T in the winding have been achieved

SemCiR: A Citation Recommendation System Based on a Novel Semantic Distance Measure

Science.gov (United States)

Zarrinkalam, Fattane; Kahani, Mohsen

2013-01-01

Purpose: The purpose of this paper is to propose a novel citation recommendation system that inputs a text and recommends publications that should be cited by it. Its goal is to help researchers in finding related works. Further, this paper seeks to explore the effect of using relational features in addition to textual features on the quality of…

Modular Mobile Application Design

OpenAIRE

Jim Hahn; Nathaniel Ryckman

2012-01-01

This article describes the development of the Minrva library app for Android phones. The decisions to build a native application with Java and use a modular design are discussed. The application includes five modules: catalog search, in-building navigation, a barcode scanning feature, and up to date notifications of circulating technology availability. A sixth module, Amazon recommendations, that is not included in the version of the app that was released is also discussed. The article also r...

Design and marketing features influencing choice of e-cigarettes and tobacco in the EU.

Science.gov (United States)

Laverty, Anthony A; Vardavas, Constantine I; Filippidis, Filippos T

2016-10-01

Data were analysed from the 2014 Special Eurobarometer for Tobacco survey. We estimated self-rated importance of various factors in the choice of both tobacco and electronic cigarettes (e-cigarettes) among tobacco smokers who had ever used an e-cigarette. Among ever users of tobacco and e-cigarettes (N = 2430), taste (39.4%), price (39.2%) and amount of nicotine (27.3%) were the most commonly cited reasons for choosing their brand of e-cigarettes. Those aged 15-24 were more likely to cite external packaging [adjusted prevalence ratio (aPR = 2.06, 95% CI 1.00-4.23)] and design features (aPR = 1.99, 1.20-3.29) as important. As further legislation is debated and enacted enhanced regulation of price, design and marketing features of e-cigarettes may help to reduce the appeal of e-cigarettes. © The Author 2016. Published by Oxford University Press on behalf of the European Public Health Association.

A prototype feature system for feature retrieval using relationships

Science.gov (United States)

Choi, J.; Usery, E.L.

2009-01-01

Using a feature data model, geographic phenomena can be represented effectively by integrating space, theme, and time. This paper extends and implements a feature data model that supports query and visualization of geographic features using their non-spatial and temporal relationships. A prototype feature-oriented geographic information system (FOGIS) is then developed and storage of features named Feature Database is designed. Buildings from the U.S. Marine Corps Base, Camp Lejeune, North Carolina and subways in Chicago, Illinois are used to test the developed system. The results of the applications show the strength of the feature data model and the developed system 'FOGIS' when they utilize non-spatial and temporal relationships in order to retrieve and visualize individual features.

Diffusive Barrier and Getter Under Waste Packages VA Reference Design Feature Evaluations

International Nuclear Information System (INIS)

MacNeil, K.

1999-01-01

This technical document evaluates those aspects of the diffusive barrier and getter features which have the potential for enhancing the performance of the Viability Assessment Reference Design and are also directly related to the key attributes for the repository safety strategy of that design. The effects of advection, hydrodynamic dispersion, and diffusion on the radionuclide migration rates through the diffusive barrier were determined through the application of the one-dimensional, advection/dispersion/diffusion equation. The results showed that because advective flow described by the advection-dispersion equation dominates, the diffusive barrier feature alone would not be effective in retarding migration of radiocuclides. However, if the diffusive barrier were combined with one or more features that reduced the potential for advection, then transport of radionuclides would be dominated by diffusion and their migration from the EBS would be impeded. Apatite was chosen as the getter material used for this report. Two getter configurations were developed, Case 1 and Case 2. As in the evaluation of the diffusive barrier, the effects of advection, hydrodynamic dispersion, and diffusion on the migration of radionuclides through the getter are evaluated. However, in addition to these mechanisms, the one-dimensional advection/dispersion/diffusion model is modified to include the effect of sorption on radionuclide migration rates through the sorptive medium (getter). As a result of sorption, the longitudinal dispersion coefficient, and the average linear velocity are effectively reduced by the retardation factor. The retardation factor is a function of the getter material's dry bulk density, sorption coefficient and moisture content. The results of the evaluation showed that a significant delay in breakthrough through the getter can be achieved if the thickness of the getter barrier is increased

Evaluation of the radiation exposure. Recommendation of the radiation protection commission

International Nuclear Information System (INIS)

Baldauf, Daniela

2014-01-01

The recommendation of the Strahlenschutzkommission (radiation protection commission) deals with the realistic requirements for the radiation exposure assessment based on radio-ecological modeling. The recommendation is applicable for all exposure situations that can be derived from FEP (features, events processes) exposure scenarios. In this case the exposure scenario consists of natural and technical features and a set of processes and events that can influence the radiation exposure of the population. The report includes the scientific justification, the previous procedure in Germany and abroad (EURATOM, France, UK, Ukraine, USA).

MRI of Creutzfeldt-Jakob disease: Imaging features and recommended MRI protocol

Energy Technology Data Exchange (ETDEWEB)

Collie, D.A.; Sellar, R.J.; Zeidler, M.; Colchester, A.C.F.; Knight, R.; Will, R.G

2001-09-01

Creutzfeldt-Jakob Disease (CJD) is a rare, progressive and invariably fatal neurodegenerative disease characterized by specific histopathological features. Of the four subtypes of CJD described, the commonest is sporadic CJD (sCJD). More recently, a new clinically distinct form of the disease affecting younger patients, known as variant CJD (vCJD), has been identified, and this has been causally linked to the bovine spongiform encephalopathy (BSE) agent in cattle. Characteristic appearances on magnetic resonance imaging (MRI) have been identified in several forms of CJD; sCJD may be associated with high signal changes in the putamen and caudate head and vCJD is usually associated with hyperintensity of the pulvinar (posterior nuclei) of the thalamus. These appearances and other imaging features are described in this article. Using appropriate clinical and radiological criteria and tailored imaging protocols, MRI plays an important part in the in vivodiagnosis of this disease. Collie, D.A. et al. (2001)

MRI of Creutzfeldt-Jakob disease: Imaging features and recommended MRI protocol

International Nuclear Information System (INIS)

Collie, D.A.; Sellar, R.J.; Zeidler, M.; Colchester, A.C.F.; Knight, R.; Will, R.G.

2001-01-01

Creutzfeldt-Jakob Disease (CJD) is a rare, progressive and invariably fatal neurodegenerative disease characterized by specific histopathological features. Of the four subtypes of CJD described, the commonest is sporadic CJD (sCJD). More recently, a new clinically distinct form of the disease affecting younger patients, known as variant CJD (vCJD), has been identified, and this has been causally linked to the bovine spongiform encephalopathy (BSE) agent in cattle. Characteristic appearances on magnetic resonance imaging (MRI) have been identified in several forms of CJD; sCJD may be associated with high signal changes in the putamen and caudate head and vCJD is usually associated with hyperintensity of the pulvinar (posterior nuclei) of the thalamus. These appearances and other imaging features are described in this article. Using appropriate clinical and radiological criteria and tailored imaging protocols, MRI plays an important part in the in vivodiagnosis of this disease. Collie, D.A. et al. (2001)

Three-Dimensional Elastomeric Scaffolds Designed with Cardiac-Mimetic Structural and Mechanical Features

Science.gov (United States)

Neal, Rebekah A.; Jean, Aurélie; Park, Hyoungshin; Wu, Patrick B.; Hsiao, James; Engelmayr, George C.; Langer, Robert

2013-01-01

Tissue-engineered constructs, at the interface of material science, biology, engineering, and medicine, have the capacity to improve outcomes for cardiac patients by providing living cells and degradable biomaterials that can regenerate the native myocardium. With an ultimate goal of both delivering cells and providing mechanical support to the healing heart, we designed three-dimensional (3D) elastomeric scaffolds with (1) stiffnesses and anisotropy mimicking explanted myocardial specimens as predicted by finite-element (FE) modeling, (2) systematically varied combinations of rectangular pore pattern, pore aspect ratio, and strut width, and (3) structural features approaching tissue scale. Based on predicted mechanical properties, three scaffold designs were selected from eight candidates for fabrication from poly(glycerol sebacate) by micromolding from silicon wafers. Large 20×20 mm scaffolds with high aspect ratio features (5:1 strut height:strut width) were reproducibly cast, cured, and demolded at a relatively high throughput. Empirically measured mechanical properties demonstrated that scaffolds were cardiac mimetic and validated FE model predictions. Two-layered scaffolds providing fully interconnected pore networks were fabricated by layer-by-layer assembly. C2C12 myoblasts cultured on one-layered scaffolds exhibited specific patterns of cell elongation and interconnectivity that appeared to be guided by the scaffold pore pattern. Neonatal rat heart cells cultured on two-layered scaffolds for 1 week were contractile, both spontaneously and in response to electrical stimulation, and expressed sarcomeric α-actinin, a cardiac biomarker. This work not only demonstrated several scaffold designs that promoted functional assembly of rat heart cells, but also provided the foundation for further computational and empirical investigations of 3D elastomeric scaffolds for cardiac tissue engineering. PMID:23190320

Design data and safety features of commercial nuclear power plants. Vol. IV. Dockets 50-452 through 50-503

International Nuclear Information System (INIS)

Heddleson, F.A.

1975-03-01

Design data, safety features, and site characteristics are summarized for 36 nuclear power units in 18 power stations in the United States. Six pages of data are presented for each plant consisting of thermal-hydraulic and nuclear factors, containment features, emergency-core-cooling systems, site features, circulating water system data, and miscellaneous factors. An aerial perspective is also presented for each plant. The volume covers reactors with dockets 50-452 through 50-503. (U.S.)

Design features of offshore oil production platforms influence their susceptibility to biocorrosion.

Science.gov (United States)

Duncan, Kathleen E; Davidova, Irene A; Nunn, Heather S; Stamps, Blake W; Stevenson, Bradley S; Souquet, Pierre J; Suflita, Joseph M

2017-08-01

Offshore oil-producing platforms are designed for efficient and cost-effective separation of oil from water. However, design features and operating practices may create conditions that promote the proliferation and spread of biocorrosive microorganisms. The microbial communities and their potential for metal corrosion were characterized for three oil production platforms that varied in their oil-water separation processes, fluid recycling practices, and history of microbially influenced corrosion (MIC). Microbial diversity was evaluated by 16S rRNA gene sequencing, and numbers of total bacteria, archaea, and sulfate-reducing bacteria (SRB) were estimated by qPCR. The rates of 35 S sulfate reduction assay (SRA) were measured as a proxy for metal biocorrosion potential. A variety of microorganisms common to oil production facilities were found, but distinct communities were associated with the design of the platform and varied with different locations in the processing stream. Stagnant, lower temperature (production platforms can be used to identify operational practices that inadvertently promote the proliferation, distribution, and activity of biocorrosive microorganisms.

Personalized Resource Recommendations using Learning from Positive and Unlabeled Examples

Directory of Open Access Journals (Sweden)

Priyank Thakkar

2016-08-01

Full Text Available This paper proposes a novel approach for recommending social resources using learning from positive and unlabeled examples. Bookmarks submitted on social bookmarking system delicious1 and artists on online music system last.fm2 are considered as social resources. The foremost feature of this problem is that there are no labeled negative resources/examples available for learning a recommender/classifier. The memory based collaborative filtering has served as the most widely used algorithm for social resource recommendation. However, its predictions are based on some ad hoc heuristic rules and its success depends on the availability of a critical mass of users. This paper proposes model based two-step techniques to learn a classifier using positive and unlabeled examples to address personalized resource recommendations. In the first step of these techniques, naïve Bayes classifier is employed to identify reliable negative resources. In the second step, to generate effective resource recommender, classification and regression tree and least square support vector machine (LS-SVM are exercised. A direct method based on LS-SVM is also put forward to realize the recommendation task. LS-SVM is customized for learning from positive and unlabeled data. Furthermore, the impact of feature selection on our proposed techniques is also studied. Memory based collaborative filtering as well as our proposed techniques exploit usage data to generate personalized recommendations. Experimental results show that the proposed techniques outperform existing method appreciably.

Design Features and Capabilities of the First Materials Science Research Rack

Science.gov (United States)

Pettigrew, P. J.; Lehoczky, S. L.; Cobb, S. D.; Holloway, T.; Kitchens, L.

2003-01-01

The First Materials Science Research Rack (MSRR-1) aboard the International Space Station (ISS) will offer many unique capabilities and design features to facilitate a wide range of materials science investigations. The initial configuration of MSRR-1 will accommodate two independent Experiment Modules (EMS) and provide the capability for simultaneous on-orbit processing. The facility will provide the common subsystems and interfaces required for the operation of experiment hardware and accommodate telescience capabilities. MSRR1 will utilize an International Standard Payload Rack (ISPR) equipped with an Active Rack Isolation System (ARIS) for vibration isolation of the facility.

Design of a verifiable subset for HAL/S

Science.gov (United States)

Browne, J. C.; Good, D. I.; Tripathi, A. R.; Young, W. D.

1979-01-01

An attempt to evaluate the applicability of program verification techniques to the existing programming language, HAL/S is discussed. HAL/S is a general purpose high level language designed to accommodate the software needs of the NASA Space Shuttle project. A diversity of features for scientific computing, concurrent and real-time programming, and error handling are discussed. The criteria by which features were evaluated for inclusion into the verifiable subset are described. Individual features of HAL/S with respect to these criteria are examined and justification for the omission of various features from the subset is provided. Conclusions drawn from the research are presented along with recommendations made for the use of HAL/S with respect to the area of program verification.

Fusing Recommendations for Social Bookmarking Websites

DEFF Research Database (Denmark)

Bogers, Toine; van den Bosch, Antal

2011-01-01

Social bookmarking websites are rapidly growing in popularity. Recommender systems, a promising remedy to the information overload accompanying the explosive growth in content, are designed to identify which unseen content might be of interest to a particular user, based on his or her past...... that use tag overlap and metadata provide better results for social bookmarking data sets than the transaction patterns that are used traditionally in recommender systems research. In addition, we investigate how to fuse different recommendation approaches to further improve recommendation accuracy. We...... preferences. Most previous work in recommendation for social bookmarking suffers from a lack of comparisons between the different available approaches. In this article, we address this issue by comparing and evaluating eight recommendation approaches on four data sets from two domains. We find that approaches...

Definitions, End Points, and Clinical Trial Designs for Non-Muscle-Invasive Bladder Cancer: Recommendations From the International Bladder Cancer Group

NARCIS (Netherlands)

Kamat, A.M.; Sylvester, R.J.; Bohle, A.; Palou, J.; Lamm, D.L.; Brausi, M.; Soloway, M.; Persad, R.; Buckley, R.; Colombel, M.; Witjes, J.A.

2016-01-01

PURPOSE: To provide recommendations on appropriate clinical trial designs in non-muscle-invasive bladder cancer (NMIBC) based on current literature and expert consensus of the International Bladder Cancer Group. METHODS: We reviewed published trials, guidelines, meta-analyses, and reviews and

A CNN Based Approach for Garments Texture Design Classification

Directory of Open Access Journals (Sweden)

S.M. Sofiqul Islam

2017-05-01

Full Text Available Identifying garments texture design automatically for recommending the fashion trends is important nowadays because of the rapid growth of online shopping. By learning the properties of images efficiently, a machine can give better accuracy of classification. Several Hand-Engineered feature coding exists for identifying garments design classes. Recently, Deep Convolutional Neural Networks (CNNs have shown better performances for different object recognition. Deep CNN uses multiple levels of representation and abstraction that helps a machine to understand the types of data more accurately. In this paper, a CNN model for identifying garments design classes has been proposed. Experimental results on two different datasets show better results than existing two well-known CNN models (AlexNet and VGGNet and some state-of-the-art Hand-Engineered feature extraction methods.

An Agent Based Approach To Finding Expertise In The Engineering Design Environment

OpenAIRE

Crowder, Richard; Hughes, Gareth; Hall, Wendy

2003-01-01

During the engineering design process people need to locate colleagues with knowledge to resolve a problem. As identified by discussions with practicing designers the use of computer based systems that assist users with finding such expertise will become increasingly important. In this paper we discuss the development of an agent based Expertise Finder suitable for use within an engineering design environment. A key feature of our approach is that the Expertise Finder returns both recommended...

Recommendations for designing and conducting veterinary clinical pathology biologic variation studies.

Science.gov (United States)

Freeman, Kathleen P; Baral, Randolph M; Dhand, Navneet K; Nielsen, Søren Saxmose; Jensen, Asger L

2017-06-01

The recent creation of a veterinary clinical pathology biologic variation website has highlighted the need to provide recommendations for future studies of biologic variation in animals in order to help standardize and improve the quality of published information and to facilitate review and selection of publications as standard references. The following recommendations are provided in the format and order commonly found in veterinary publications. A checklist is provided to aid in planning, implementing, and evaluating veterinary studies on biologic variation (Appendix S1). These recommendations provide a valuable resource for clinicians, laboratorians, and researchers interested in conducting studies of biologic variation and in determining the quality of studies of biologic variation in veterinary laboratory testing. © 2017 American Society for Veterinary Clinical Pathology.

Recommending peers for learning: Matching on dissimilarity in interpretations to provoke breakdown

NARCIS (Netherlands)

Rajagopal, Kamakshi; Van Bruggen, Jan; Sloep, Peter

2016-01-01

People recommenders are a widespread feature of social networking sites and educational social learning platforms alike. However, when these systems are used to extend learners’ Personal Learning Networks, they often fall short of providing recommendations of learning value to their users. This

Diffusion-based recommendation with trust relations on tripartite graphs

Science.gov (United States)

Wang, Ximeng; Liu, Yun; Zhang, Guangquan; Xiong, Fei; Lu, Jie

2017-08-01

The diffusion-based recommendation approach is a vital branch in recommender systems, which successfully applies physical dynamics to make recommendations for users on bipartite or tripartite graphs. Trust links indicate users’ social relations and can provide the benefit of reducing data sparsity. However, traditional diffusion-based algorithms only consider rating links when making recommendations. In this paper, the complementarity of users’ implicit and explicit trust is exploited, and a novel resource-allocation strategy is proposed, which integrates these two kinds of trust relations on tripartite graphs. Through empirical studies on three benchmark datasets, our proposed method obtains better performance than most of the benchmark algorithms in terms of accuracy, diversity and novelty. According to the experimental results, our method is an effective and reasonable way to integrate additional features into the diffusion-based recommendation approach.

Content-based Music Search and Recommendation System

Science.gov (United States)

Takegawa, Kazuki; Hijikata, Yoshinori; Nishida, Shogo

Recently, the turn volume of music data on the Internet has increased rapidly. This has increased the user's cost to find music data suiting their preference from such a large data set. We propose a content-based music search and recommendation system. This system has an interface for searching and finding music data and an interface for editing a user profile which is necessary for music recommendation. By exploiting the visualization of the feature space of music and the visualization of the user profile, the user can search music data and edit the user profile. Furthermore, by exploiting the infomation which can be acquired from each visualized object in a mutually complementary manner, we make it easier for the user to search music data and edit the user profile. Concretely, the system gives to the user an information obtained from the user profile when searching music data and an information obtained from the feature space of music when editing the user profile.

Preference Elicitation and Negotiation in a Group Recommender System

OpenAIRE

Álvarez Márquez , Jesús ,; Ziegler , Jurgen

2015-01-01

International audience; We present a novel approach to group recommender systems that better takes into account the social interaction in a group when formulating, discussing and negotiating the features of the item to be jointly selected. Our approach provides discussion support in a collaborative preference elicitation and negotiation process. Individual preferences are continuously aggregated and immediate feedback of the resulting recommendations is provided. We also support the last stag...

Design Review Report for formal review of safety class features of exhauster system for rotary mode core sampling

International Nuclear Information System (INIS)

JANICEK, G.P.

2000-01-01

Report documenting Formal Design Review conducted on portable exhausters used to support rotary mode core sampling of Hanford underground radioactive waste tanks with focus on Safety Class design features and control requirements for flammable gas environment operation and air discharge permitting compliance

Design Review Report for formal review of safety class features of exhauster system for rotary mode core sampling

Energy Technology Data Exchange (ETDEWEB)

JANICEK, G.P.

2000-06-08

Report documenting Formal Design Review conducted on portable exhausters used to support rotary mode core sampling of Hanford underground radioactive waste tanks with focus on Safety Class design features and control requirements for flammable gas environment operation and air discharge permitting compliance.

DESIGNING FEATURES OF POWER OPTICAL UNITS FOR TECHNOLOGICAL EQUIPMENT

Directory of Open Access Journals (Sweden)

M. Y. Afanasiev

2016-03-01

Full Text Available This paper considers the question of an optical unit designing for transmitting power laser radiation through an optical fiber. The aim of this work is designing a simple construction unit with minimized reflection losses. The source of radiation in the optical unit described below is an ultraviolet laser with diode pumping. We present the general functioning scheme and designing features for the three main parts: laser beam deflecting system, laser beam dump and optical unit control system. The described laser beam deflection system is composed of a moving flat mirror and a spherical scattering mirror. Comparative analysis of the production technology for such mirrors was carried out, and, as a result, the decision was made to produce both mirrors of 99.99 % pure molybdenum without coating. A moving mirror deflects laser emission from a source through a fiber or deflects it on a spherical mirror and into the laser beam dump, moreover, switching from one position to another occurs almost immediately. It is shown that a scattering mirror is necessary, otherwise, the absorbing surface of the beam dump is being worn out irregularly. The laser beam dump is an open conical cavity, in which the conical element with its spire turned to the emission source is placed. Special microgeometry of the internal surface of the beam dump is suggested for the better absorption effect. An optical unit control system consists of a laser beam deflection system, laser temperature sensor, deflection system solenoid temperature sensor, and deflection mirror position sensor. The signal processing algorithm for signals coming from the sensors to the controller is described. The optical unit will be used in special technological equipment.

Exposure diversity as a design principle for recommender systems

NARCIS (Netherlands)

Heidelberger, N.; Karpinnen, K.; D'Acunto, L.

2018-01-01

Personalized recommendations in search engines, social media and also in more traditional media increasingly raise concerns over potentially negative consequences for diversity and the quality of public discourse. The algorithmic filtering and adaption of online content to personal preferences and

Web Interface Design Principles for Adults' Self-Directed Learning

Science.gov (United States)

Firat, Mehmet; Sakar, A. Nurhan; Kabakci Yurdakul, Isil

2016-01-01

One of the most important features which e-learning tools and environments must possess within the scope of lifelong learning is self-directed learning, which can be considered as a form of self-learning. The aim of this study was to determine, based on the views and recommendations of experts, interface design principles for the development of…

A Survey on Linked Data and the Social Web as facilitators for TEL recommender systems

NARCIS (Netherlands)

Dietze, Stefan; Drachsler, Hendrik; Daniela, Giordano

2014-01-01

Personalisation, adaptation and recommendation are central features of TEL environments. In this context, information retrieval techniques are applied as part of TEL recommender systems to filter and recommend learning resources or peer learners according to user preferences and requirements.

DESIGN PACKAGE 1E SYSTEM SAFETY ANALYSIS

Energy Technology Data Exchange (ETDEWEB)

M. Salem

1995-06-23

The purpose of this analysis is to systematically identify and evaluate hazards related to the Yucca Mountain Project Exploratory Studies Facility (ESF) Design Package 1E, Surface Facilities, (for a list of design items included in the package 1E system safety analysis see section 3). This process is an integral part of the systems engineering process; whereby safety is considered during planning, design, testing, and construction. A largely qualitative approach was used since a radiological System Safety Analysis is not required. The risk assessment in this analysis characterizes the accident scenarios associated with the Design Package 1E structures/systems/components(S/S/Cs) in terms of relative risk and includes recommendations for mitigating all identified risks. The priority for recommending and implementing mitigation control features is: (1) Incorporate measures to reduce risks and hazards into the structure/system/component design, (2) add safety devices and capabilities to the designs that reduce risk, (3) provide devices that detect and warn personnel of hazardous conditions, and (4) develop procedures and conduct training to increase worker awareness of potential hazards, on methods to reduce exposure to hazards, and on the actions required to avoid accidents or correct hazardous conditions.

Passive Safety Features for Small Modular Reactors

International Nuclear Information System (INIS)

Ingersoll, Daniel T.

2010-01-01

The rapid growth in the size and complexity of commercial nuclear power plants in the 1970s spawned an interest in smaller, simpler designs that are inherently or intrinsically safe through the use of passive design features. Several designs were developed, but none were ever built, although some of their passive safety features were incorporated into large commercial plant designs that are being planned or built today. In recent years, several reactor vendors are actively redeveloping small modular reactor (SMR) designs with even greater use of passive features. Several designs incorporate the ultimate in passive safety they completely eliminate specific accident initiators from the design. Other design features help to reduce the likelihood of an accident or help to mitigate the accidents consequences, should one occur. While some passive safety features are common to most SMR designs, irrespective of the coolant technology, other features are specific to water, gas, or liquid-metal cooled SMR designs. The extensive use of passive safety features in SMRs promise to make these plants highly robust, protecting both the general public and the owner/investor. Once demonstrated, these plants should allow nuclear power to be used confidently for a broader range of customers and applications than will be possible with large plants alone.

Centrifugal compressor design options for small turbochargers

Energy Technology Data Exchange (ETDEWEB)

Rodgers, C. [ITC, San Diego (United States)

1998-07-01

Evolutionary development of the small turbocharger centrifugal compressor over the past four decades has resulted in a finely honed turbomachinery component satisfying both thermodynamic and economic constraints. At this penultimate stage of development an appraisal was considered timely of the remaining design options that exist to enhance the performance characteristics and cost reduction features. This paper presents the results of an analytical study of various small centrifugal compressor design options, assessed in merit of both aerodynamic and manufacturing cost attributes, together with recommendations for future research avenues. (author)

Cigarette Design Features in Low-, Middle-, and High-Income Countries

Directory of Open Access Journals (Sweden)

Rosalie V. Caruso

2012-01-01

Full Text Available Previous studies have shown that country income grouping is correlated with cigarette engineering. Cigarettes (=111 brands were purchased during 2008–2010 from 11 low-, middle-, and high-income countries to assess physical dimensions and an array of cigarette design features. Mean ventilation varied significantly across low- (7.5%, middle- (15.3%, and high-income (26.2% countries (≤0.001. Differences across income groups were also seen in cigarette length (=0.001, length of the tipping paper (=0.01, filter weight (=0.017, number of vent rows (=0.003, per-cigarette tobacco weight (=0.04, and paper porosity (=0.008. Stepwise linear regression showed ventilation and tobacco length as major predictors of ISO tar yields in low-income countries (=0.909, 0.047, while tipping paper (<0.001, filter length (<0.001, number of vent rows (=0.014, and per-cigarette weight (=0.015 were predictors of tar yields in middle-income countries. Ventilation (<0.001, number of vent rows (=0.009, per-cigarette weight (<0.001, and filter diameter (=0.004 predicted tar yields in high-income countries. Health officials must be cognizant of cigarette design issues to provide effective regulation of tobacco products.

Design features and operating experiences of neutron measurement system for HANARO

International Nuclear Information System (INIS)

Kim, Young Ki; Choi, Young San

1999-02-01

This paper discusses unique mechanical and electrical design features of neutron measurement system for HANARO and its operating experiences. Some unexpected problems and misbehaviors during installation and commissioning are briefly introduced. Engineering approaches and procedures in order to solve the problems we are described in priority. It has been proved, through years of operation that the wide range neutron measurement system for HANARO has a good capability of providing the stable and reliable neutron flux signal for reactor control and reactor protection. I hopefully expect that the engineering solutions suggested in this report could be a good reference to the other applications. (Author). 12 refs., 6 tabs., 23 figs

Features interior design offices

OpenAIRE

Novikov, A. S.; National Aviation University, Ukraine

2014-01-01

The article examines the laws and the formation of office space inthe current conditions and investigate the application of the latest technical tools aesthetics to improve the quality of design solutions.

Design and implementation of a contactless multiple hand feature acquisition system

Science.gov (United States)

Zhao, Qiushi; Bu, Wei; Wu, Xiangqian; Zhang, David

2012-06-01

In this work, an integrated contactless multiple hand feature acquisition system is designed. The system can capture palmprint, palm vein, and palm dorsal vein images simultaneously. Moreover, the images are captured in a contactless manner, that is, users need not to touch any part of the device when capturing. Palmprint is imaged under visible illumination while palm vein and palm dorsal vein are imaged under near infrared (NIR) illumination. The capturing is controlled by computer and the whole process is less than 1 second, which is sufficient for online biometric systems. Based on this device, this paper also implements a contactless hand-based multimodal biometric system. Palmprint, palm vein, palm dorsal vein, finger vein, and hand geometry features are extracted from the captured images. After similarity measure, the matching scores are fused using weighted sum fusion rule. Experimental results show that although the verification accuracy of each uni-modality is not as high as that of state-of-the-art, the fusion result is superior to most of the existing hand-based biometric systems. This result indicates that the proposed device is competent in the application of contactless multimodal hand-based biometrics.

Deep nets vs expert designed features in medical physics: An IMRT QA case study.

Science.gov (United States)

Interian, Yannet; Rideout, Vincent; Kearney, Vasant P; Gennatas, Efstathios; Morin, Olivier; Cheung, Joey; Solberg, Timothy; Valdes, Gilmer

2018-03-30

The purpose of this study was to compare the performance of Deep Neural Networks against a technique designed by domain experts in the prediction of gamma passing rates for Intensity Modulated Radiation Therapy Quality Assurance (IMRT QA). A total of 498 IMRT plans across all treatment sites were planned in Eclipse version 11 and delivered using a dynamic sliding window technique on Clinac iX or TrueBeam Linacs. Measurements were performed using a commercial 2D diode array, and passing rates for 3%/3 mm local dose/distance-to-agreement (DTA) were recorded. Separately, fluence maps calculated for each plan were used as inputs to a convolution neural network (CNN). The CNNs were trained to predict IMRT QA gamma passing rates using TensorFlow and Keras. A set of model architectures, inspired by the convolutional blocks of the VGG-16 ImageNet model, were constructed and implemented. Synthetic data, created by rotating and translating the fluence maps during training, was created to boost the performance of the CNNs. Dropout, batch normalization, and data augmentation were utilized to help train the model. The performance of the CNNs was compared to a generalized Poisson regression model, previously developed for this application, which used 78 expert designed features. Deep Neural Networks without domain knowledge achieved comparable performance to a baseline system designed by domain experts in the prediction of 3%/3 mm Local gamma passing rates. An ensemble of neural nets resulted in a mean absolute error (MAE) of 0.70 ± 0.05 and the domain expert model resulted in a 0.74 ± 0.06. Convolutional neural networks (CNNs) with transfer learning can predict IMRT QA passing rates by automatically designing features from the fluence maps without human expert supervision. Predictions from CNNs are comparable to a system carefully designed by physicist experts. © 2018 American Association of Physicists in Medicine.

TOURISM RECOMMENDATION SYSTEM: EMPIRICAL INVESTIGATION

OpenAIRE

Biljana PETREVSKA; Saso KOCESKI

2012-01-01

The paper makes an attempt to justify the necessity of implementing recommendation system which will assist tourists in identification of their ideal holiday. The proposed recommendation system based on collaborative filtering notes positive impulses in the case of Macedonia. A software module is developed being capable to generate a personalized list of favorable and tailor-made items. The research outcomes indicate that the designed national tourism web portal can provide satisfactory perfo...

Design features of isotope production facility at Inshas cyclotron complex. Vol. 1

Energy Technology Data Exchange (ETDEWEB)

Comsan, M N [Nuclear Research Center, Atomic Energy Aurhority, Cairo, (Egypt)

1996-03-01

The nuclear research center, AEA, Egypt is erecting at its Inshas campus cyclotron complex for multidisciplinary use for research and application. The complex is to utilize a russian made AVF cyclotron accelerator of the type MGC-20 with MeV protons. Among its applications, the accelerator will be used for the production of short lived cyclotron isotopes. This article presents a concise description of the design features of isotope production facility to be annexed to the complex layout, schemes for radio waste, ventilation, and air conditioning systems. 2 figs., 2 tabs.

On the Recommender System for University Library

Science.gov (United States)

Fu, Shunkai; Zhang, Yao; Seinminn

2013-01-01

Libraries are important to universities, and they have two primary features: readers as well as collections are highly professional. In this study, based on the experimental study with five millions of users' borrowing records, our discussion covers: (1) the necessity of recommender system for university libraries; (2) collaborative filtering (CF)…

Recommendations for designing and conducting veterinary clinical pathology biologic variation studies

DEFF Research Database (Denmark)

Freeman, Kathleen P; Baral, Randolph M; Dhand, Navneet K

2017-01-01

The recent creation of a veterinary clinical pathology biologic variation website has highlighted the need to provide recommendations for future studies of biologic variation in animals in order to help standardize and improve the quality of published information and to facilitate review......). These recommendations provide a valuable resource for clinicians, laboratorians, and researchers interested in conducting studies of biologic variation and in determining the quality of studies of biologic variation in veterinary laboratory testing....

Westinghouse integrated protection system. An overview of the software design and maintenance features

International Nuclear Information System (INIS)

Gibson, R.J.

1995-01-01

The Westinghouse Integrated Protection System was designed with the goal of providing a system which can be easily verified, validated, and maintained. The software design and structure promote the ease of translation from functional requirements to applications function software while also improving the ability to verify and maintain the applications function software. The use of independent, reusable, common functions software modules focuses the design, verification, and validation of the software and reduces the likelihood of errors occurring during the application and maintenance of the software. The simple continuous loop method of operation used throughout the IPS provides a standard deterministic method of operation. The IPS design also incorporates the use of embedded self-diagnostics to perform continuous hardware oriented tests of the system and the use of an independent subsystem to automatically perform a functional test of the system. Maintenance interfaces also exist to readily identify and locate faults as well as providing other maintenance capabilities. These testing and maintenance features enhance the overall reliability and availability of the system. (orig.) (2 refs., 2 figs.)

A Direct Assessment of Obesogenic Built Environments: Challenges and Recommendations

International Nuclear Information System (INIS)

Gasevic, D.; Vukmirovich, N.; Lear, S.A.; Salim Yusuf; Teo, K.; Chow, C.; Dagenais, G.

2011-01-01

This paper outlines the challenges faced during direct built environment (BE) assessments of 42 Canadian communities of various income and urbanization levels. In addition, we recommend options for overcoming such challenges during BE community assessments. Direct BE assessments were performed utilizing two distinct audit methods: (1) modified version of Irvine-Minnesota Inventory in which a paper version of an audit tool was used to assess BE features and (2) a Physical Activity and Nutrition Features audit tool, where the presence and positions of all environmental features of interest were recorded using a Global-Positioning-System (GPS) unit. This paper responds to the call for the need of creators and users of environmental audit tools to share experiences regarding the usability of tools for BE assessments. The outlined BE assessment challenges plus recommendations for overcoming them can help improve and refine the existing audit tools and aid researchers in future assessments of the BE

Preliminary safety analysis for key design features of KALIMER with breakeven core

Energy Technology Data Exchange (ETDEWEB)

Hahn, Do Hee; Kwon, Y. M.; Chang, W. P.; Suk, S. D.; Lee, Y. B.; Jeong, K. S

2001-06-01

KAERI is currently developing the conceptual design of a Liquid Metal Reactor, KALIMER (Korea Advanced Liquid MEtal Reactor) under the Long-term Nuclear R and D Program. KALIMER addresses key issues regarding future nuclear power plants such as plant safety, economics, proliferation, and waste. In this report, descriptions of safety design features and safety analyses results for selected ATWS accidents for the breakeven core KALIMER are presented. First, the basic approach to achieve the safety goal is introduced in Chapter 1, and the safety evaluation procedure for the KALIMER design is described in Chapter 2. It includes event selection, event categorization, description of design basis events, and beyond design basis events.In Chapter 3, results of inherent safety evaluations for the KALIMER conceptual design are presented. The KALIMER core and plant system are designed to assure benign performance during a selected set of events without either reactor control or protection system intervention. Safety analyses for the postulated anticipated transient without scram (ATWS) have been performed to investigate the KALIMER system response to the events. In Chapter 4, the design of the KALIMER containment dome and the results of its performance analyses are presented. The design of the existing containment and the KALIMER containment dome are compared in this chapter. Procedure of the containment performance analysis and the analysis results are described along with the accident scenario and source terms. Finally, a simple methodology is introduced to investigate the core energetics behavior during HCDA in Chapter 5. Sensitivity analyses have been performed for the KALIMER core behavior during super-prompt critical excursions, using mathematical formulations developed in the framework of the Modified Bethe-Tait method. Work energy potential was then calculated based on the isentropic fuel expansion model.

New design of engineered safety features-component control system to improve performance and reliability

International Nuclear Information System (INIS)

Kim, S.T.; Jung, H.W.; Lee, S.J.; Cho, C.H.; Kim, D.H.; Kim, H.

2006-01-01

Full text: Full text: The Engineered Safety Features-Component Control System (ESF-CCS) controls the engineered safety features of a Nuclear Power Plant such as Solenoid Operated Valves (SOV), Motor Operated Valves (MOV), pumps, dampers, etc. to mitigate the effects of a Design Basis Accident (DBA) or an abnormal operation. ESF-CCS serves as an interface system between the Plant Protection System (PPS) and remote actuation devices. ESF-CCS is composed of fault tolerant Group Controllers GC, Loop Controllers (LC), ESF-CCS Test and Interface Processor (ETIP) and Cabinet Operator Module (COM) and Control Channel Gateway (CCG) etc. GCs in each division are designed to be fully independent triple configuration, which perform system level NSSS and BOP ESFAS logic (2-out-of-4 logic and l-out-of-2 logic, respectively) making it possible to test each GC individually during normal operation. In the existing configuration, the safety-related plant component control is part of the Plant Control System (PCS) non-safety system. For increased safety and reliability, this design change incorporates this part into the LCs, and is therefore designed according to the safety-critical system procedures. The test and diagnosis capabilities of ETIP and COM are reinforced. By means of an automatic periodic test for all main functions of the system, it is possible to quickly determine an abnormal status of the system, and to decrease the elapsed time for tests, thus effectively increasing availability. ESF-CCS consists of four independent divisions (A, B, C, and D) in the Advanced Power Reactor 1400 (APR1400). One prototype division is being manufactured and will be tested

Total System Performance Assessment for the Site Recommendation

Energy Technology Data Exchange (ETDEWEB)

None

2000-10-02

As mandated in the Nuclear Waste Policy Act of 1982, the U.S. Department of Energy (DOE) has been investigating a candidate site at Yucca Mountain, Nevada, to determine whether it is suitable for development of the nation's first repository for permanent geologic disposal of spent nuclear fuel (SNF) and high-level radioactive waste (HLW). The Nuclear Waste Policy Amendments Act of 1987 directed that only Yucca Mountain be characterized to evaluate the site's suitability. Three main components of the DOE site characterization program are testing, design, and performance assessment. These program components consist of: Investigation of natural features and processes by analyzing data collected from field tests conducted above and below ground and from laboratory tests of rock, gas, and water samples Design of a repository and waste packages tailored to the site features, supported by laboratory testing of candidate materials for waste packages and design related testing in the underground tunnels where waste would be emplaced Quantitative estimates of the performance of the total repository system, over a range of possible conditions and for different repository configurations, by means of computer modeling techniques that are based on site and materials testing data and accepted principles of physics and chemistry. To date, DOE has completed and documented four major iterations of total system performance assessment (TSPA) for the Yucca Mountain site: TSPA-91 (Barnard et al. 1992), TSPA-93 (Wilson et al. 1994; CRWMS M and O 1994), TSPA-95 (CRWMS M and O 1995), and the Total System Performance Assessment-Viability Assessment (TSPA-VA) (DOE 1998a, Volume 3). Each successive TSPA iteration has advanced the technical understanding of the performance attributes of the natural features and processes and enhanced engineering designs. The next major iteration of TSPA is to be conducted in support of the next major programmatic milestone for the DOE, namely the

The pit ventilation features and the design principle of ventilation system in trackless mining uranium mine

International Nuclear Information System (INIS)

Deng Wenhui; Zhou Xinghuo; Li Xianjie

2001-01-01

According to the pit arrangement features of trackless mining uranium mine, based on the fundamental of radon permeation and control, and analysis of radon pollution characteristics and radon education, the design principle of ventilation system in trackless mining uranium mine has been raised

Optimal Recommendation to Users that React: Online Learning for a Class of POMDPs

OpenAIRE

Meshram, Rahul; Gopalan, Aditya; Manjunath, D.

2016-01-01

We describe and study a model for an Automated Online Recommendation System (AORS) in which a user's preferences can be time-dependent and can also depend on the history of past recommendations and play-outs. The three key features of the model that makes it more realistic compared to existing models for recommendation systems are (1) user preference is inherently latent, (2) current recommendations can affect future preferences, and (3) it allows for the development of learning algorithms wi...

Features of a time domain simulation tool for rigid riser design

Energy Technology Data Exchange (ETDEWEB)

Morooka, Celso K.; Brandt, Dustin M. [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Faculdade de Engenharia Mecanica. Dept. de Engenharia de Petroleo; Matt, Cyntia G.C.; Franciss, Ricardo [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas

2008-07-01

This paper present a number of numerical implementations designed for the analysis of rigid riser's static and dynamic behavior that includes the effects of vortex induced vibrations (VIV) and marine hydrodynamic loads in time domain. Features include the ability to consider pipe with a free-span utilizing a soil/riser interaction model. An implementation of a numerical coupling scheme to couple the vertical riser and platform dynamics was developed to allow prediction of the sub sea Blow-Out Preventer (BOP) re-entry into a sub sea petroleum well when drilling different phases of deep and ultra-deep wells. The developments contains support for the consideration of the Self Standing Hybrid Riser (SSHR) configuration which has been shown to be a promising riser configuration in deep and ultra-deep waters. A graphical interface was also created to better grasp the results and aid in the modeling, processing and to help analyze the numerical simulations, contributing to enhance agility and quality of the riser design and analysis processes. (author)

A Mobile Ecotourism Recommendations System Using Cars-Context Aware Approaches

Directory of Open Access Journals (Sweden)

Yani Nurhadryani

2013-11-01

Full Text Available The requirements to fullfill mobility of ecotourism activities have been urgent to support each traveler with the mobile gadget application. The objective of this research is to develop an application of recommendation system based on online user personalization. This application provided features to recommendation of ecotourism based on profile user and current location, then supplied information about distance and facilities in each ecotourism place. The main of computation worked online which was based on approach called as CARS (Context Aware Recommender Systems algorithm. The result showed that the application framework succeeded to give appropriate recommendations and explaination on a mobile platform both in the form of profile based spatial data and user preferences.

Dhruva: Main design features, operational experience and utilization

Energy Technology Data Exchange (ETDEWEB)

Agarwal, S.K. [Reactor Group, BARC, Trombay, Mumbai 400085 (India)]. E-mail: swarajagarwal2000@yahoo.com; Karhadkar, C.G. [Reactor Group, BARC, Trombay, Mumbai 400085 (India); Zope, A.K. [Reactor Group, BARC, Trombay, Mumbai 400085 (India); Singh, Kanchhi [Reactor Group, BARC, Trombay, Mumbai 400085 (India)

2006-04-15

Dhruva is a product of technological initiatives taken during mid seventies when a need was felt for another research reactor having a high neutron flux to meet the growing demands of research and development in the frontier areas of science and engineering. In addition production of radioisotopes of high specific activity and the diverse requirements of a broad based user community had to be synthesized into a viable system, which could be engineered within the limited means available in the country. This high neutron flux reactor was designed, constructed and commissioned entirely by Indian scientists and engineers and it reflects the country's resolve to achieve self-reliance in the nuclear reactor technology. Dhruva is a 100 MW (thermal) research reactor with metallic natural uranium as fuel, heavy water as moderator, coolant and reflector, giving a maximum thermal neutron flux of 1.8 x 10{sup 14} n/cm{sup 2}/s. Since its first criticality on 8th August 1985, a number of experimental facilities have been added which have proven to be highly attractive for universities and industrial researchers for their scientific merits in various fields. One of the major utilization areas has been the neutron beam research using several neutron spectrometers, all of which were built in-house. A guide tube facility comprising of two neutron guides and another experimental set-up with a multi-instrument beam line have enabled further enhancement of the utilization of this National Facility by the academic institutions in the country. Production of radioisotopes of high specific activity and in increased quantity has fulfilled growing demands for many applications. The write-up provides an overview of the reactor covering its design; layout, safety features, utilization and operating experience along with description of some of the specific experimental facilities.

Peculiar Designing Features of Control Electromagnet Clutch Drives

Directory of Open Access Journals (Sweden)

Yu. M. Zakharik

2005-01-01

Full Text Available The paper considers fundamentals of control electromagnet clutch drives. Mathematics dependence of electromagnet armature position is proposed and condition of stable drive operation is determined. Recommendations for selection of drive element characteristics are given in the paper.

N-screen aware multicriteria hybrid recommender system using weight based subspace clustering.

Science.gov (United States)

Ullah, Farman; Sarwar, Ghulam; Lee, Sungchang

2014-01-01

This paper presents a recommender system for N-screen services in which users have multiple devices with different capabilities. In N-screen services, a user can use various devices in different locations and time and can change a device while the service is running. N-screen aware recommendation seeks to improve the user experience with recommended content by considering the user N-screen device attributes such as screen resolution, media codec, remaining battery time, and access network and the user temporal usage pattern information that are not considered in existing recommender systems. For N-screen aware recommendation support, this work introduces a user device profile collaboration agent, manager, and N-screen control server to acquire and manage the user N-screen devices profile. Furthermore, a multicriteria hybrid framework is suggested that incorporates the N-screen devices information with user preferences and demographics. In addition, we propose an individual feature and subspace weight based clustering (IFSWC) to assign different weights to each subspace and each feature within a subspace in the hybrid framework. The proposed system improves the accuracy, precision, scalability, sparsity, and cold start issues. The simulation results demonstrate the effectiveness and prove the aforementioned statements.

Clinical practice recommendations for depression.

Science.gov (United States)

Malhi, G S; Adams, D; Porter, R; Wignall, A; Lampe, L; O'Connor, N; Paton, M; Newton, L A; Walter, G; Taylor, A; Berk, M; Mulder, R T

2009-01-01

To provide clinically relevant evidence-based recommendations for the management of depression in adults that are informative, easy to assimilate and facilitate clinical decision making. A comprehensive literature review of over 500 articles was undertaken using electronic database search engines (e.g. MEDLINE, PsychINFO and Cochrane reviews). In addition articles, book chapters and other literature known to the authors were reviewed. The findings were then formulated into a set of recommendations that were developed by a multidisciplinary team of clinicians who routinely deal with mood disorders. The recommendations then underwent consultative review by a broader advisory panel that included experts in the field, clinical staff and patient representatives. The clinical practice recommendations for depression (Depression CPR) summarize evidence-based treatments and provide a synopsis of recommendations relating to each phase of the illness. They are designed for clinical use and have therefore been presented succinctly in an innovative and engaging manner that is clear and informative. These up-to-date recommendations provide an evidence-based framework that incorporates clinical wisdom and consideration of individual factors in the management of depression. Further, the novel style and practical approach should promote uptake and implementation.

Requirements for Semantic Educational Recommender Systems in Formal E-Learning Scenarios

Directory of Open Access Journals (Sweden)

Jesus G. Boticario

2011-07-01

Full Text Available This paper analyzes how recommender systems can be applied to current e-learning systems to guide learners in personalized inclusive e-learning scenarios. Recommendations can be used to overcome current limitations of learning management systems in providing personalization and accessibility features. Recommenders can take advantage of standards-based solutions to provide inclusive support. To this end we have identified the need for developing semantic educational recommender systems, which are able to extend existing learning management systems with adaptive navigation support. In this paper we present three requirements to be considered in developing these semantic educational recommender systems, which are in line with the service-oriented approach of the third generation of learning management systems, namely: (i a recommendation model; (ii an open standards-based service-oriented architecture; and (iii a usable and accessible graphical user interface to deliver the recommendations.

SOME FEATURES OF THE DESIGN AND CONSTRUCTION OF UNDERGROUND PUBLIC AND SHOPPING CENTRE WITH PARKING IN MINSK

Directory of Open Access Journals (Sweden)

V. H. Pastushkov

2010-03-01

Full Text Available In the article some features of designing and construction, experimental-and-theoretical researches of structures of the multifunctional underground complex (public shopping center with parking on theIndependencesq. in Minsk are considered.

Design of Ontology-Based Sharing Mechanism for Web Services Recommendation Learning Environment

Science.gov (United States)

Chen, Hong-Ren

The number of digital learning websites is growing as a result of advances in computer technology and new techniques in web page creation. These sites contain a wide variety of information but may be a source of confusion to learners who fail to find the information they are seeking. This has led to the concept of recommendation services to help learners acquire information and learning resources that suit their requirements. Learning content like this cannot be reused by other digital learning websites. A successful recommendation service that satisfies a certain learner must cooperate with many other digital learning objects so that it can achieve the required relevance. The study proposes using the theory of knowledge construction in ontology to make the sharing and reuse of digital learning resources possible. The learning recommendation system is accompanied by the recommendation of appropriate teaching materials to help learners enhance their learning abilities. A variety of diverse learning components scattered across the Internet can be organized through an ontological process so that learners can use information by storing, sharing, and reusing it.

Green Infrastructure Design Based on Spatial Conservation Prioritization and Modeling of Biodiversity Features and Ecosystem Services.

Science.gov (United States)

Snäll, Tord; Lehtomäki, Joona; Arponen, Anni; Elith, Jane; Moilanen, Atte

2016-02-01

There is high-level political support for the use of green infrastructure (GI) across Europe, to maintain viable populations and to provide ecosystem services (ES). Even though GI is inherently a spatial concept, the modern tools for spatial planning have not been recognized, such as in the recent European Environment Agency (EEA) report. We outline a toolbox of methods useful for GI design that explicitly accounts for biodiversity and ES. Data on species occurrence, habitats, and environmental variables are increasingly available via open-access internet platforms. Such data can be synthesized by statistical species distribution modeling, producing maps of biodiversity features. These, together with maps of ES, can form the basis for GI design. We argue that spatial conservation prioritization (SCP) methods are effective tools for GI design, as the overall SCP goal is cost-effective allocation of conservation efforts. Corridors are currently promoted by the EEA as the means for implementing GI design, but they typically target the needs of only a subset of the regional species pool. SCP methods would help to ensure that GI provides a balanced solution for the requirements of many biodiversity features (e.g., species, habitat types) and ES simultaneously in a cost-effective manner. Such tools are necessary to make GI into an operational concept for combating biodiversity loss and promoting ES.

DEVELOPMENT OF EDUCATION AND INFORMATION PORTAL OF PHYSICS ACADEMIC COURSE: WEB DESIGN FEATURES

Directory of Open Access Journals (Sweden)

Іryna A. Slipukhina

2018-04-01

Full Text Available The purpose of this article is to present the main components and features of designing an educational and informational portal for students. Selection of personal trajectory is realized through the use of personal account, which includes electronic laboratory reports, information materials on studying progress, means of communication with a teacher, etc. The created portal allows the administrator to easily monitor and check laboratory reports, keep an e-journal with grades. To develop the website design, functional modules and components, the Adobe Photoshop ™ environment was used, as well as the HTML and CSS layout of the web portal. The modern Bootstrap technology was applied to adapt the web page interface. The didactic opportunities of using this portal as a part of personalization process in teaching physics were considered.

Design of free patterns of nanocrystals with ad hoc features via templated dewetting

Energy Technology Data Exchange (ETDEWEB)

Aouassa, M.; Berbezier, I.; Favre, L.; Ronda, A. [IM2NP, CNRS, AMU, Marseille (France); Bollani, M.; Sordan, R. [LNES, Como (Italy); Delobbe, A.; Sudraud, P. [Orsay Physics, Fuveau (France)

2012-07-02

Design of monodisperse ultra-small nanocrystals (NCs) into large scale patterns with ad hoc features is demonstrated. The process makes use of solid state dewetting of a thin film templated through alloy liquid metal ion source focused ion beam (LMIS-FIB) nanopatterning. The solid state dewetting initiated at the edges of the patterns controllably creates the ordering of NCs with ad hoc placement and periodicity. The NC size is tuned by varying the nominal thickness of the film while their position results from the association of film retraction from the edges of the lay out and Rayleigh-like instability. The use of ultra-high resolution LMIS-FIB enables to produce monocrystalline NCs with size, periodicity, and placement tunable as well. It provides routes for the free design of nanostructures for generic applications in nanoelectronics.

On Deep Learning for Trust-Aware Recommendations in Social Networks.

Science.gov (United States)

Deng, Shuiguang; Huang, Longtao; Xu, Guandong; Wu, Xindong; Wu, Zhaohui

2017-05-01

With the emergence of online social networks, the social network-based recommendation approach is popularly used. The major benefit of this approach is the ability of dealing with the problems with cold-start users. In addition to social networks, user trust information also plays an important role to obtain reliable recommendations. Although matrix factorization (MF) becomes dominant in recommender systems, the recommendation largely relies on the initialization of the user and item latent feature vectors. Aiming at addressing these challenges, we develop a novel trust-based approach for recommendation in social networks. In particular, we attempt to leverage deep learning to determinate the initialization in MF for trust-aware social recommendations and to differentiate the community effect in user's trusted friendships. A two-phase recommendation process is proposed to utilize deep learning in initialization and to synthesize the users' interests and their trusted friends' interests together with the impact of community effect for recommendations. We perform extensive experiments on real-world social network data to demonstrate the accuracy and effectiveness of our proposed approach in comparison with other state-of-the-art methods.

Designing algorithm visualization on mobile platform: The proposed guidelines

Science.gov (United States)

Supli, A. A.; Shiratuddin, N.

2017-09-01

This paper entails an ongoing study about the design guidelines of algorithm visualization (AV) on mobile platform, helping students learning data structures and algorithm (DSA) subject effectively. Our previous review indicated that design guidelines of AV on mobile platform are still few. Mostly, previous guidelines of AV are developed for AV on desktop and website platform. In fact, mobile learning has been proved to enhance engagement in learning circumstances, and thus effect student's performance. In addition, the researchers highly recommend including UI design and Interactivity in designing effective AV system. However, the discussions of these two aspects in previous AV design guidelines are not comprehensive. The UI design in this paper describes the arrangement of AV features in mobile environment, whereas interactivity is about the active learning strategy features based on learning experiences (how to engage learners). Thus, this study main objective is to propose design guidelines of AV on mobile platform (AVOMP) that entails comprehensively UI design and interactivity aspects. These guidelines are developed through content analysis and comparative analysis from various related studies. These guidelines are useful for AV designers to help them constructing AVOMP for various topics on DSA.

Application and interview features used to assess applicant qualifications for residency training.

Science.gov (United States)

Butts, Allison R; Smith, Kelly M

2015-02-01

To determine what factors residency program directors (RPDs) consider and what methods they use to assess applicants. Respondents ranked the importance of 27 applicant features within domains: academics/credentials, application features/program fit, involvement, professional experience, research/ teaching experience, and postgraduate year 1 (PGY-1) residency experience. Rank was assigned in an ordinal fashion (1 = most important feature). The domains were characterized by their importance (mean % ± SD) in selecting candidates for interviews. Participants characterized their screening process according to 8 application and 6 interview features and the corresponding applicant dimensions evaluated. RPDs rated the importance of 14 methods applicants used to communicate with the program and 3 methods by which references were obtained. A Likert scale was used for rating (4 = crucial features). The approaches the program used to evaluate 12 application features or interpersonal interactions were reported. The most important application domain was application features/program fit (26.28 ± 19.11). The highest ranked application feature was program fit (2.04 ± 1.17). The applicant's cover letter, recommendation letters, curriculum vitae, and interview meal were commonly used to assess communication and interpersonal skills, knowledge base, and experience. The most important communication venue was the on-site interview (3.95 ± 0.23). Recommendations solicited by RPDs (3.42 ± 0.69) were most important. Programs formally evaluated the interview (89%) and recommendation letters (84%). Understanding the importance that RPDs place on application and interview features, as well as the process used to assess communication skills and interpersonal interactions, should allow residency candidates to become more competitive residency prospects.

Uncovering the information core in recommender systems

Science.gov (United States)

Zeng, Wei; Zeng, An; Liu, Hao; Shang, Ming-Sheng; Zhou, Tao

2014-08-01

With the rapid growth of the Internet and overwhelming amount of information that people are confronted with, recommender systems have been developed to effectively support users' decision-making process in online systems. So far, much attention has been paid to designing new recommendation algorithms and improving existent ones. However, few works considered the different contributions from different users to the performance of a recommender system. Such studies can help us improve the recommendation efficiency by excluding irrelevant users. In this paper, we argue that in each online system there exists a group of core users who carry most of the information for recommendation. With them, the recommender systems can already generate satisfactory recommendation. Our core user extraction method enables the recommender systems to achieve 90% of the accuracy of the top-L recommendation by taking only 20% of the users into account. A detailed investigation reveals that these core users are not necessarily the large-degree users. Moreover, they tend to select high quality objects and their selections are well diversified.

Design and construction features of steam generators at a nuclear power station

International Nuclear Information System (INIS)

Chakrabarti, A.K.; Gupta, K.N.; Bapat, C.N.; Sharma, V.K.

1996-01-01

The Indian nuclear power programme is based on Pressurised Heavy Water Reactors (PHWRs) using natural uranium as fuel and heavy water as reactor coolant as well as moderator. The nuclear heat is generated in the fuel located in the pressure tubes. Pressurised heavy water in the primary heat transport (PHT) system is circulated through the tubes which picks up the heat from the fuel and transfers it to ordinary water in steam generators (SGs) to produce steam. The steam is used for providing power to the turbine. The steam generator is a critical equipment in the nuclear steam supply system (NSSS) of a nuclear reactor. SG tube surface area constitute about 80% of total primary circuit surface area. A typical value in a 220 MWe reactor is 9000 m 2 which can release considerable amount of corrosion products unless very low corrosion rates are achieved by proper design, material selection and water chemistry control. Design and construction features of SGs are given. 1 tab

A recommender system for team formation in MANET

Directory of Open Access Journals (Sweden)

Waleed M. Al-Adrousy

2015-04-01

Full Text Available Mobile social networking is a new trend for social networking that enables users with similar interests to connect together through mobile devices. Therefore, it possesses the same features of a social network with added support to the features of a Mobile Ad-hoc Network (MANET in terms of limited computing power, limited coverage, and intermittent connectivity. One of the most important features in social networks is Team Formation. Team Formation aims to assemble a set of users with a set of skills required for a certain task. The team formation is a special type of recommendation which is important to enable cooperative work among users. Team formation is challenging since users’ interaction time is limited in MANET. The main objective of this paper is to introduce a peer-to-peer team formation technique based on zone routing protocol (ZRP. A comparison was made with Flooding and Adaptive Location Aided Mobile Ad Hoc Network Routing (ALARM techniques. The suggested technique achieves fast successful recommendations within the limited mobile resources and reduces exchanged messages. The suggested technique has fast response time, small required buffering and low power consumption. The testing results show better performance of the suggested technique compared to flooding and ALARM technique.

Algorithms for Academic Search and Recommendation Systems

DEFF Research Database (Denmark)

Amolochitis, Emmanouil

2014-01-01

are part of a developed Movie Recommendation system, the first such system to be commercially deployed in Greece by a major Triple Play services provider. In the third part of the work we present the design of a quantitative association rule mining algorithm. The introduced mining algorithm processes......In this work we present novel algorithms for academic search, recommendation and association rules mining. In the first part of the work we introduce a novel hierarchical heuristic scheme for re-ranking academic publications. The scheme is based on the hierarchical combination of a custom...... implementation of the term frequency heuristic, a time-depreciated citation score and a graph-theoretic computed score that relates the paper’s index terms with each other. On the second part we describe the design of hybrid recommender ensemble (user, item and content based). The newly introduced algorithms...

Human resource recommendation algorithm based on ensemble learning and Spark

Science.gov (United States)

Cong, Zihan; Zhang, Xingming; Wang, Haoxiang; Xu, Hongjie

2017-08-01

Aiming at the problem of “information overload” in the human resources industry, this paper proposes a human resource recommendation algorithm based on Ensemble Learning. The algorithm considers the characteristics and behaviours of both job seeker and job features in the real business circumstance. Firstly, the algorithm uses two ensemble learning methods-Bagging and Boosting. The outputs from both learning methods are then merged to form user interest model. Based on user interest model, job recommendation can be extracted for users. The algorithm is implemented as a parallelized recommendation system on Spark. A set of experiments have been done and analysed. The proposed algorithm achieves significant improvement in accuracy, recall rate and coverage, compared with recommendation algorithms such as UserCF and ItemCF.

A Novel Recommendation System to Match College Events and Groups to Students

Science.gov (United States)

Qazanfari, K.; Youssef, A.; Keane, K.; Nelson, J.

2017-10-01

With the recent increase in data online, discovering meaningful opportunities can be time-consuming and complicated for many individuals. To overcome this data overload challenge, we present a novel text-content-based recommender system as a valuable tool to predict user interests. To that end, we develop a specific procedure to create user models and item feature-vectors, where items are described in free text. The user model is generated by soliciting from a user a few keywords and expanding those keywords into a list of weighted near-synonyms. The item feature-vectors are generated from the textual descriptions of the items, using modified tf-idf values of the users’ keywords and their near-synonyms. Once the users are modeled and the items are abstracted into feature vectors, the system returns the maximum-similarity items as recommendations to that user. Our experimental evaluation shows that our method of creating the user models and item feature-vectors resulted in higher precision and accuracy in comparison to well-known feature-vector-generating methods like Glove and Word2Vec. It also shows that stemming and the use of a modified version of tf-idf increase the accuracy and precision by 2% and 3%, respectively, compared to non-stemming and the standard tf-idf definition. Moreover, the evaluation results show that updating the user model from usage histories improves the precision and accuracy of the system. This recommender system has been developed as part of the Agnes application, which runs on iOS and Android platforms and is accessible through the Agnes website.

E-book recommender system design and implementation based on data mining

Science.gov (United States)

Wang, Zongjiang

2011-12-01

In the knowledge explosion, rapid development of information age, how quickly the user or users interested in useful information for feedback to the user problem to be solved in this article. This paper based on data mining, association rules to the model and classification model a combination of electronic books on the recommendation of the user's neighboring users interested in e-books to target users. Introduced the e-book recommendation and the key technologies, system implementation algorithms, and implementation process, was proved through experiments that this system can help users quickly find the required e-books.

Recommended Format for the Periodic Table of the Elements.

Science.gov (United States)

Loening, K. L.

1984-01-01

Presents a new, recommended format for the periodic table which does not use the letters A and B to designate subgroups of elements. Also describes events leading to the adoption of this recommendation. (JM)

[The morphological features of skin wounds inflicted by joinery hand saws designed for different types of sawing].

Science.gov (United States)

Sarkisian, B A; Azarov, P A

2014-01-01

The objective of the present work was to study the morphological features of skin wounds inflicted by joinery hand saws designed for longitudinal, transverse, and mixed sawing. A total of 60 injuries to the thigh skin inflicted by the recurring and reciprocating saw movements were simulated. The hand saws had 5 mm high "sharp" and "blunt"-tipped teeth. The analysis of the morphological features of the wounds revealed differences in their length and depth, shape of edge cuts and defects, and the relief of the walls depending on the sawtooth sharpness and the mode of sawing. It is concluded that morphological features of the wounds may be used to determine the type of the saw, the sharpness of its teeth, the direction and frequency of its movements.

Mental health consumer parents' recommendations for designing psychoeducation interventions for their minor children.

Science.gov (United States)

Riebschleger, Joanne; Onaga, Esther; Tableman, Betty; Bybee, Deborah

2014-09-01

This research explores consumer parents' recommendations for developing psychoeducation programs for their minor children. Data were drawn from a purposive sample of 3 focus groups of parent consumers of a community mental health agency. The research question was: "What do consumer parents recommend for developing psychoeducation programs for their minor children?" Parents recommended content foci of mental illness, recovery, heritability, stigma, and coping. The next step is youth psychoeducation intervention development and evaluation. Parents, youth, and professionals should be included in the program planning. (PsycINFO Database Record (c) 2014 APA, all rights reserved).

Design evaluation of the 20-cm (8-inch) secondary burner system

International Nuclear Information System (INIS)

Rode, J.S.

1977-08-01

This report describes an evaluation of the design of the existing 20-cm (8-inch) engineering-scale secondary burner system in the HTGR reprocessing cold pilot plant at General Atomic Co. The purpose of this evaluation is to assess the suitability of the existing design as a prototype of the HTGR Recycle Demonstration Facility (HRDF) secondary burner system and to recommend alternatives where the existing design is thought to be unsuitable as a prototype. This evaluation has led to recommendations for the parallel development of two integrated design concepts for a prototype secondary burner system. One concept utilizes the existing burner heating and cooling subsystems in order to minimize development risk, but simplifies a number of other features associated with remote maintenance and burner operation. The other concept, which offers maximum cost reduction, utilizes internal gas cooling of the burner, retains the existing heating subsystem for design compatibility, but requires considerable development to reduce the risk to acceptable limits. These concepts, as well as other design alternatives, are described and evaluated

Accessing microfluidics through feature-based design software for 3D printing

Science.gov (United States)

Shankles, Peter G.; Millet, Larry J.; Aufrecht, Jayde A.

2018-01-01

Additive manufacturing has been a cornerstone of the product development pipeline for decades, playing an essential role in the creation of both functional and cosmetic prototypes. In recent years, the prospects for distributed and open source manufacturing have grown tremendously. This growth has been enabled by an expanding library of printable materials, low-cost printers, and communities dedicated to platform development. The microfluidics community has embraced this opportunity to integrate 3D printing into the suite of manufacturing strategies used to create novel fluidic architectures. The rapid turnaround time and low cost to implement these strategies in the lab makes 3D printing an attractive alternative to conventional micro- and nanofabrication techniques. In this work, the production of multiple microfluidic architectures using a hybrid 3D printing-soft lithography approach is demonstrated and shown to enable rapid device fabrication with channel dimensions that take advantage of laminar flow characteristics. The fabrication process outlined here is underpinned by the implementation of custom design software with an integrated slicer program that replaces less intuitive computer aided design and slicer software tools. Devices are designed in the program by assembling parameterized microfluidic building blocks. The fabrication process and flow control within 3D printed devices were demonstrated with a gradient generator and two droplet generator designs. Precise control over the printing process allowed 3D microfluidics to be printed in a single step by extruding bridge structures to ‘jump-over’ channels in the same plane. This strategy was shown to integrate with conventional nanofabrication strategies to simplify the operation of a platform that incorporates both nanoscale features and 3D printed microfluidics. PMID:29596418

Accessing microfluidics through feature-based design software for 3D printing.

Science.gov (United States)

Shankles, Peter G; Millet, Larry J; Aufrecht, Jayde A; Retterer, Scott T

2018-01-01

Additive manufacturing has been a cornerstone of the product development pipeline for decades, playing an essential role in the creation of both functional and cosmetic prototypes. In recent years, the prospects for distributed and open source manufacturing have grown tremendously. This growth has been enabled by an expanding library of printable materials, low-cost printers, and communities dedicated to platform development. The microfluidics community has embraced this opportunity to integrate 3D printing into the suite of manufacturing strategies used to create novel fluidic architectures. The rapid turnaround time and low cost to implement these strategies in the lab makes 3D printing an attractive alternative to conventional micro- and nanofabrication techniques. In this work, the production of multiple microfluidic architectures using a hybrid 3D printing-soft lithography approach is demonstrated and shown to enable rapid device fabrication with channel dimensions that take advantage of laminar flow characteristics. The fabrication process outlined here is underpinned by the implementation of custom design software with an integrated slicer program that replaces less intuitive computer aided design and slicer software tools. Devices are designed in the program by assembling parameterized microfluidic building blocks. The fabrication process and flow control within 3D printed devices were demonstrated with a gradient generator and two droplet generator designs. Precise control over the printing process allowed 3D microfluidics to be printed in a single step by extruding bridge structures to 'jump-over' channels in the same plane. This strategy was shown to integrate with conventional nanofabrication strategies to simplify the operation of a platform that incorporates both nanoscale features and 3D printed microfluidics.

Exploring Socio-Technical Features of Green Interior Design of Residential Buildings: Indicators, Interdependence and Embeddedness

Directory of Open Access Journals (Sweden)

Yan Ning

2016-12-01

Full Text Available This research aims to develop indicators for assessing green interior design of new residential buildings in China, grounded in the socio-technical systems approach. The research was carried out through a critical literature review and two focus group studies. The results show that the boundaries of green interior design were identified with respect to three dimensions, namely performance, methodology and stakeholders. The socio-technical systems approach argues for the recognition of the interdependence between the systems elements and the feature of embeddedness. The interdependence of the systems elements exists within each of these three dimensions and across them. It is also found that the socio-technical systems of green interior design are embedded in the social, regulatory and geographic context. Taking interior design of residential buildings as the empirical setting, this study contributes to the literature of green building assessment by presenting a socio-technical systems approach.

Selecting Picture Books Featuring Characters with Autism Spectrum Disorder: Recommendations for Teachers

Science.gov (United States)

Gaffney, Meredith; Wilkins, Julia

2016-01-01

We read 48 children's books featuring characters with autism spectrum disorder (ASD) to determine which books would be appropriate for use during read-alouds in early childhood classrooms. We conducted a search on Amazon for children's books on ASD published after 2010 and identified 50 books that met the following criteria: (a) the book was a…

License Application Design Selection Report, REV 01. August 1999

International Nuclear Information System (INIS)

Hastings, C.R.

1999-01-01

In December 1998, the U.S. Department of Energy (DOE) published the ''Viability Assessment of a Repository at Yucca Mountain'' (DOE 1998b). The Viability Assessment described a preliminary design of a potential repository at Yucca Mountain, Nevada, for disposal of spent nuclear fuel and high-level radioactive waste, and assessed the probable behavior of that repository design in the Yucca Mountain geologic setting. The report concluded that 'Yucca Mountain remains a promising site for a geologic repository and that work should proceed to support a decision in 2001 on whether to recommend the site to the President for development as a repository'. It also concluded that 'uncertainties remain about key natural processes, the preliminary design, and how the site and design would interact'. Recognizing that the design that was evaluated will be refined before a license application could be submitted, the Viability Aassesment notes that 'DOE is evaluating several design options and alternatives that could reduce existing uncertainty and improve the performance of the repository system'. During the preparation of the Viability Assessment, DOE asked the contractor for the Civilian Radioactive Waste Management Program to study alternative design concepts for a potential geologic repository for high-level radioactive waste at Yucca Mountain. The License Application Design Selection (LADS) project was initiated to conduct that study. The goal of the project was to develop and evaluate a diverse range of conceptual repository designs that work well in concert with the Yucca Mountain site and to recommend an initial design concept for the possible Site Recommendation and License Apllication. This report presents the results of the LADS project. The design process consisted of two phases. In Phase I, a series of basic design concepts (design alternatives) and components (design features) were analyzed for their potential value as elements of a repository design. In Phase II

Modular Mobile Application Design

Directory of Open Access Journals (Sweden)

Jim Hahn

2012-10-01

Full Text Available This article describes the development of the Minrva library app for Android phones. The decisions to build a native application with Java and use a modular design are discussed. The application includes five modules: catalog search, in-building navigation, a barcode scanning feature, and up to date notifications of circulating technology availability. A sixth module, Amazon recommendations, that is not included in the version of the app that was released is also discussed. The article also reports on the findings of two rounds of usability testing and the plans for future development of the app.

Semantic content-based recommendations using semantic graphs.

Science.gov (United States)

Guo, Weisen; Kraines, Steven B

2010-01-01

Recommender systems (RSs) can be useful for suggesting items that might be of interest to specific users. Most existing content-based recommendation (CBR) systems are designed to recommend items based on text content, and the items in these systems are usually described with keywords. However, similarity evaluations based on keywords suffer from the ambiguity of natural languages. We present a semantic CBR method that uses Semantic Web technologies to recommend items that are more similar semantically with the items that the user prefers. We use semantic graphs to represent the items and we calculate the similarity scores for each pair of semantic graphs using an inverse graph frequency algorithm. The items having higher similarity scores to the items that are known to be preferred by the user are recommended.

Review of Japanese recommendations on design and construction of different classes of fiber reinforced concrete and application examples

DEFF Research Database (Denmark)

Uchida, Yuichi; Fischer, Gregor; Hishiki, Yoshihiro

2008-01-01

The development of concrete and cementitious composites with fiber reinforcement to improve the tensile load-deformation behavior has resulted in three distinct classes of materials. These include conventional Fiber Reinforced Concrete (FRC) with tension softening response, High Performance Fiber...... Reinforced Cement Composites (HPFRCC) with strain hardening and multiple cracking behavior, and Ultra High-strength Fiber Reinforced concrete (UFC) with increased tensile strength. The recommendations on the design, production, and application of these classes of fiber reinforced concrete have been...

SCW Pressure-Channel Nuclear Reactor Some Design Features

Science.gov (United States)

Pioro, Igor L.; Khan, Mosin; Hopps, Victory; Jacobs, Chris; Patkunam, Ruban; Gopaul, Sandeep; Bakan, Kurtulus

Concepts of nuclear reactors cooled with water at supercritical pressures were studied as early as the 1950s and 1960s in the USA and Russia. After a 30-year break, the idea of developing nuclear reactors cooled with SuperCritical Water (SCW) became attractive again as the ultimate development path for water cooling. The main objectives of using SCW in nuclear reactors are: 1) to increase the thermal efficiency of modern Nuclear Power Plants (NPPs) from 30-35% to about 45-48%, and 2) to decrease capital and operational costs and hence decrease electrical energy costs (˜1000 US/kW or even less). SCW NPPs will have much higher operating parameters compared to modern NPPs (pressure about 25 MPa and outlet temperature up to 625°C), and a simplified flow circuit, in which steam generators, steam dryers, steam separators, etc., can be eliminated. Also, higher SCW temperatures allow direct thermo-chemical production of hydrogen at low cost, due to increased reaction rates. Pressure-tube or pressure-channel SCW nuclear reactor concepts are being developed in Canada and Russia for some time. Some design features of the Canadian concept related to fuel channels are discussed in this paper. The main conclusion is that the development of SCW pressure-tube nuclear reactors is feasible and significant benefits can be expected over other thermal-energy systems.

A Study on Multiattribute Aggregation Approaches to Product Recommendation

Directory of Open Access Journals (Sweden)

Jing-Zhong Jin

2013-01-01

Full Text Available In today’s increasingly competitive market, consumers usually have to face a huge number of products with different designs but having the same use. Therefore, an important problem for manufacturers is to attract consumers by special designs of the products. This paper aims at the improvement of a consumer-oriented approach in recommending products, and proposing a recommendation system for Japanese traditional crafts based on target-oriented fuzzy method and ontological engineering. Specifically, a target-oriented fuzzy method is used for measuring the fitness of a selected attribute to a certain object. Two aggregation models for dealing with a multiattribute evaluation and ranking are introduced; four ranking methods are also examined for getting a recommendation list. To test the aggregation models and the ranking methods, a recommendation system was developed and a comparison test was conducted.

Task team approach to safeguards and security designs

International Nuclear Information System (INIS)

Zack, N.R.; Wilkey, D.D.

1991-01-01

In 1987, a U.S. department of Energy (DOE) supported task team was organized at the request of the DOE Idaho Field Office (DOE-ID) to provide support for safeguards and security (S and S) designs of the Special Isotope Separation (SIS) facility. Prior to deferral of the project, the SIS facility was to be constructed at the Idaho National Engineering Laboratory (INEL) to produce weapons grade plutonium from DOE owned fuel grade plutonium. The task team was assembled to provide the resources necessary to assure that S and S considerations were included as an integral part of the design of the facility, and that SIS designs would take advantage of available technology in the areas of physical security, measurements, accountability, and material and personnel tracking. The task team included personnel from DOE/Office of Safeguards and Security (DOE-OSS), DOE-ID, DOE contractors, and the national laboratories providing a wide range of expertise and experience. This paper reports that the team reviewed proposed designs and provided recommendations for safeguards and security features in each stage of the design process. The value of this approach to safeguards and security designs will be discussed with respect to benefits, lessons learned, and recommendations for future applications

Design data and safety features of commercial nuclear power plants including cumulative index for Volumes I--VI

International Nuclear Information System (INIS)

Heddleson, F.A.

1977-01-01

Design data, safety features, and site characteristics are summarized for 12 nuclear power units in 6 power stations in the United States. Six pages of data are presented for each station, consisting of thermal-hydraulic and nuclear factors, containment features, emergency-core-cooling systems, site features, circulating water system data, and miscellaneous factors. In addition, an aerial perspective is presented for each plant. This volume covers plants with docket numbers 50-553 through 50-569 (Phipps Bend, Black Fox, Yellow Creek, and NEP) and two earlier plants not previously reported--Hope Creek (50-354, 50-355) and WPPSS 1 and 4 (50-460, 50-513). Indexes for this volume and the five earlier volumes are presented in three forms--by docket number, by plant name, and by participating utility

Pill testing or drug checking in Australia: Acceptability of service design features.

Science.gov (United States)

Barratt, Monica J; Bruno, Raimondo; Ezard, Nadine; Ritter, Alison

2018-02-01

This study aimed to determine design features of a drug-checking service that would be feasible, attractive and likely to be used by Australian festival and nightlife attendees. Web survey of 851 Australians reporting use of psychostimulants and/or hallucinogens and attendance at licensed venues past midnight and/or festivals in the past year (70% male; median age 23 years). A drug-checking service located at festivals or clubs would be used by 94%; a fixed-site service external to such events by 85%. Most (80%) were willing to wait an hour for their result. Almost all (94%) would not use a service if there was a possibility of arrest, and a majority (64%) would not use a service that did not provide individual feedback of results. Drug-checking results were only slightly more attractive if they provided comprehensive quantitative results compared with qualitative results of key ingredients. Most (93%) were willing to pay up to $5, and 68% up to $10, per test. One-third (33%) reported willingness to donate a whole dose for testing: they were more likely to be male, younger, less experienced, use drugs more frequently and attend venues/festivals less frequently. In this sample, festival- or club-based drug-checking services with low wait times and low cost appear broadly attractive under conditions of legal amnesty and individualised feedback. Quantitative analysis of ecstasy pills requiring surrender of a whole pill may appeal to a minority in Australia where pills are more expensive than elsewhere. [Barratt MJ, Bruno R, Ezard N, Ritter A. Pill testing or drug checking in Australia: Acceptability of service design features. Drug Alcohol Rev 2017;00:000-000]. © 2017 Australasian Professional Society on Alcohol and other Drugs.

Promoting cold-start items in recommender systems.

Science.gov (United States)

Liu, Jin-Hu; Zhou, Tao; Zhang, Zi-Ke; Yang, Zimo; Liu, Chuang; Li, Wei-Min

2014-01-01

As one of the major challenges, cold-start problem plagues nearly all recommender systems. In particular, new items will be overlooked, impeding the development of new products online. Given limited resources, how to utilize the knowledge of recommender systems and design efficient marketing strategy for new items is extremely important. In this paper, we convert this ticklish issue into a clear mathematical problem based on a bipartite network representation. Under the most widely used algorithm in real e-commerce recommender systems, the so-called item-based collaborative filtering, we show that to simply push new items to active users is not a good strategy. Interestingly, experiments on real recommender systems indicate that to connect new items with some less active users will statistically yield better performance, namely, these new items will have more chance to appear in other users' recommendation lists. Further analysis suggests that the disassortative nature of recommender systems contributes to such observation. In a word, getting in-depth understanding on recommender systems could pave the way for the owners to popularize their cold-start products with low costs.

Promoting Cold-Start Items in Recommender Systems

Science.gov (United States)

Liu, Jin-Hu; Zhou, Tao; Zhang, Zi-Ke; Yang, Zimo; Liu, Chuang; Li, Wei-Min

2014-01-01

As one of the major challenges, cold-start problem plagues nearly all recommender systems. In particular, new items will be overlooked, impeding the development of new products online. Given limited resources, how to utilize the knowledge of recommender systems and design efficient marketing strategy for new items is extremely important. In this paper, we convert this ticklish issue into a clear mathematical problem based on a bipartite network representation. Under the most widely used algorithm in real e-commerce recommender systems, the so-called item-based collaborative filtering, we show that to simply push new items to active users is not a good strategy. Interestingly, experiments on real recommender systems indicate that to connect new items with some less active users will statistically yield better performance, namely, these new items will have more chance to appear in other users' recommendation lists. Further analysis suggests that the disassortative nature of recommender systems contributes to such observation. In a word, getting in-depth understanding on recommender systems could pave the way for the owners to popularize their cold-start products with low costs. PMID:25479013

Design evaluation of the 40-cm (16-inch) primary burner system

International Nuclear Information System (INIS)

Rode, J.S.

1977-06-01

An evaluation is given of the design of the existing 40-cm (16-in.) engineering-scale primary burner system in the HTGR reprocessing cold pilot plant at General Atomic Co. The purpose of this evaluation is to assess the suitability of the existing design as a prototype of the HTGR Recycle Demonstration Facility (HRDF) primary burner system and to recommend alternatives where the existing design is thought to be unsuitable as a prototype. This evaluation has led to recommendations for the parallel development of two integrated design concepts for a prototype primary burner system. One concept utilizes the existing burner heating and cooling sub-systems in order to minimize development risk, but simplifies a number of other features associated with remote maintenance and burner operation. The other concept, which offers maximum cost reduction, utilizes direct contact hot gas heating and internal gas cooling of the burner, but requires considerable development to reduce the risk to acceptable limits. These concepts, as well as other design alternatives, are described and evaluated

Perspectives of increasing energy efficiency on designing new and reconstruction of present city districts: World experiences and local recommendations

Directory of Open Access Journals (Sweden)

Pucar Mila

2006-01-01

Full Text Available With 20th century along came a significant increase of energy consumption and a serious ecological crisis caused by the extensive usage of fossil fuels (oil, coal. Because of that, many countries have declared regulations to lower the traditional energy consumption and to stimulate usage of renewable energy sources. This problem is particularly evident in residential buildings sector, because over 50% of the overall energy produced is slinked in this way. This paper gives methodological recommendations regarding the principles of energy efficient housing and general comfort improvement as well as evident advantages of passive solar panels compared to traditional energy sources (fossil fuels. These possibilities are considered in two different scenarios: reconstruction of already built city blocks, and energy efficient implementation in case of brand new structures. This paper considers two different case studies, one reconstructive - a city block in France, built in the mid 60’s and the other of energy efficient settlement in Greece "Solar Village", built in the 80’s, which was designed by bioclimatic principles from the very beginning. Energy efficient planning and design methodological recommendations based on these two examples are regarding the New Belgrade block 7/3, which has been built in the 50’s.

Clinical practice recommendations for bipolar disorder.

Science.gov (United States)

Malhi, G S; Adams, D; Lampe, L; Paton, M; O'Connor, N; Newton, L A; Walter, G; Taylor, A; Porter, R; Mulder, R T; Berk, M

2009-01-01

To provide clinically relevant evidence-based recommendations for the management of bipolar disorder in adults that are informative, easy to assimilate and facilitate clinical decision-making. A comprehensive literature review of over 500 articles was undertaken using electronic database search engines (e.g. MEDLINE, PsychINFO and Cochrane reviews). In addition articles, book chapters and other literature known to the authors were reviewed. The findings were then formulated into a set of recommendations that were developed by a multidisciplinary team of clinicians who routinely deal with mood disorders. These preliminary recommendations underwent extensive consultative review by a broader advisory panel that included experts in the field, clinical staff and patient representatives. The clinical practice recommendations for bipolar disorder (bipolar CPR) summarise evidence-based treatments and provide a synopsis of recommendations relating to each phase of the illness. They are designed for clinical use and have therefore been presented succinctly in an innovative and engaging manner that is clear and informative. These up-to-date recommendations provide an evidence-based framework that incorporates clinical wisdom and consideration of individual factors in the management of bipolar disorder. Further, the novel style and practical approach should promote their uptake and implementation.

TOURISM RECOMMENDATION SYSTEM: EMPIRICAL INVESTIGATION

Directory of Open Access Journals (Sweden)

Biljana PETREVSKA

2012-12-01

Full Text Available The paper makes an attempt to justify the necessity of implementing recommendation system which will assist tourists in identification of their ideal holiday. The proposed recommendation system based on collaborative filtering notes positive impulses in the case of Macedonia. A software module is developed being capable to generate a personalized list of favorable and tailor-made items. The research outcomes indicate that the designed national tourism web portal can provide satisfactory performance and may be of high importance to all key-tourism actors in the process of identifying measures necessary for creating competitive tourism product.

Learning to recommend helpful hotel reviews

OpenAIRE

O'Mahony, Michael P.; Smyth, Barry

2009-01-01

User-generated reviews are a common and valuable source of product information, yet little attention has been paid as to how best to present them to end-users. In this paper, we describe a classification-based recommender system that is designed to recommend the most helpful reviews for a given product. We present a large-scale evaluation of our approach using TripAdvisor hotel reviews, and we show that our approach is capable of suggesting superior reviews compared to a number of alternat...

An incentive-based architecture for social recommendations

KAUST Repository

Bhattacharjee, Rajat; Goel, Ashish; Kollias, Konstantinos

2009-01-01

We present an incentive-based architecture for providing recommendations in a social network. We maintain a distinct reputation system for each individual and we rely on users to identify appropriate correlations and rate the items using a system-provided recommendation language. The key idea is to design an incentive structure and a ranking system such that any inaccuracy in the recommendations implies the existence of a profitable arbitrage opportunity, hence making the system resistant to malicious spam and presentation bias. We also show that, under mild assumptions, our architecture provides users with incentive to minimize the Kullback-Leibler divergence between the ratings and the actual item qualities, quickly driving the system to an equilibrium state with accurate recommendations. Copyright 2009 ACM.

Integrated system of safety features for spent fuel interim storage

International Nuclear Information System (INIS)

Pantazi, Doina; Stanciu, Marcela; Mateescu, Silvia; Marin, Ion

1999-01-01

The design of the spent fuel interim storage facility (SFISF) must meet the applicable safety requirements in order to ensure radiological protection of the personnel, public and environment during all phases of the facility. To elaborate the safety documentation necessary for licensing, we were trying to chose the most appropriate approach related to safety features for SFISF, based on national and international regulations, standards and recommendations, as well as on the experience of other countries with similar facilities and finally, on our own experience in designing other nuclear objectives in Romania. The paper presents the issues that we consider important for the safety evaluation and are developed as a detailed diagram. The diagram contains in a logical succession the following issues: - fundamental principles of radioprotection; - fundamental safety principles of radioactive waste management; - safety objectives of SFISF; - safety criteria for SFISF; - safety requirements for SFISF; - siting criteria for SFISF; - siting requirements for SFISF. (authors)

Design of a Real-Time and Continua-Based Framework for Care Guideline Recommendations

Directory of Open Access Journals (Sweden)

Yu-Feng Lin

2014-04-01

Full Text Available Telehealth is an important issue in the medical and healthcare domains. Although a number of systems have been developed to meet the demands of emerging telehealth services, the following problems still remain to be addressed: (1 most systems do not monitor/predict the vital signs states so that they are able to send alarms to caregivers in real-time; (2 most systems do not focus on reducing the amount of work that caregivers need to do, and provide patients with remote care; and (3 most systems do not recommend guidelines for caregivers. This study thus proposes a framework for a real-time and Continua-based Care Guideline Recommendation System (Cagurs which utilizes mobile device platforms to provide caregivers of chronic patients with real-time care guideline recommendations, and that enables vital signs data to be transmitted between different devices automatically, using the Continua standard. Moreover, the proposed system adopts the episode mining approach to monitor/predict anomalous conditions of patients, and then offers related recommended care guidelines to caregivers so that they can offer preventive care in a timely manner.

Consensus of recommendations guiding comparative effectiveness research methods.

Science.gov (United States)

Morton, Jacob B; McConeghy, Robert; Heinrich, Kirstin; Gatto, Nicolle M; Caffrey, Aisling R

2016-12-01

Because of an increasing demand for quality comparative effectiveness research (CER), methods guidance documents have been published, such as those from the Agency for Healthcare Research and Quality (AHRQ) and the Patient-Centered Outcomes Research Institute (PCORI). Our objective was to identify CER methods guidance documents and compare them to produce a summary of important recommendations which could serve as a consensus of CER method recommendations. We conducted a systematic literature review to identify CER methods guidance documents published through 2014. Identified documents were analyzed for methods guidance recommendations. Individual recommendations were categorized to determine the degree of overlap. We identified nine methods guidance documents, which contained a total of 312 recommendations, 97% of which were present in two or more documents. All nine documents recommended transparency and adaptation for relevant stakeholders in the interpretation and dissemination of results. Other frequently shared CER methods recommendations included: study design and operational definitions should be developed a priori and allow for replication (n = 8 documents); focus on areas with gaps in current clinical knowledge that are relevant to decision-makers (n = 7); validity of measures, instruments, and data should be assessed and discussed (n = 7); outcomes, including benefits and harms, should be clinically meaningful, and objectively measured (n = 7). Assessment for and strategies to minimize bias (n = 6 documents), confounding (n = 6), and heterogeneity (n = 4) were also commonly shared recommendations between documents. We offer a field-consensus guide based on nine CER methods guidance documents that will aid researchers in designing CER studies and applying CER methods. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Key enabling design features of the ITER HNB Duct Liner

Energy Technology Data Exchange (ETDEWEB)

Chuilon, Ben, E-mail: ben.chuilon@ccfe.ac.uk; Mistry, Sanjay; Andrews, Rodney; Verhoeven, Roel; Xue, Yongkuan

2015-10-15

Highlights: • Key engineering design details of the ITER HND Duct Liner are presented. • A standardised CuCrZr water cooled panel that can be remotely handled is detailed. • Bolts are protected from beam power by means of a tungsten cap to radiate heat away. • Water connections placed coaxially are protected from beam power by a tungsten ring. • Explosion-bonded CuCrZr-316L panels result in a tenfold disruption torque reduction. - Abstract: The Duct Liner (DL) for the ITER Heating Neutral Beam (HNB) is a key component in the beam transport system. Duct Liners installed into equatorial ports 4 and 5 of the Vacuum Vessel (VV) will protect the port extension from power deposition due to re-ionisation and direct interception of the HNB. Furthermore, the DL contributes towards the shielding of the VV and superconducting coils from plasma photons and neutrons. The DL incorporates a 316L(N)-IG, deep-drilled and water cooled Neutron Shield (NS) whose internal walls are lined with actively cooled CuCrZr Duct Liner Modules (DLMs). These Remote Handling Class 2 and 3 panels provide protection from neutral beam power. This paper provides an overview of the preliminary design for the ITER HNB DL and focusses on critical features that ensure compatibility with: high heat flux requirements, remote maintenance procedures, and transient magnetic fields arising from major plasma disruptions. The power deposited on a single DLM can reach 300 kW with a peak power density of 2.4 MW/m{sup 2}. Feeding coolant to the DLMs is accomplished via welded connections to the internal coolant network of the NS. These are placed coaxially to allow for thermal expansion of the DLMs without the use of deformable connections. Critically, the remote maintenance of individual DLMs necessitates access to water connections and bolts from the beam facing surface, thus subjecting them to high heat flux loads. This design challenge will become more prevalent as fusion devices become more powerful

Recommended Practices for the Safe Design and Operation of Flywheels

Energy Technology Data Exchange (ETDEWEB)

Bender, Donald Arthur [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-12-01

Flywheel energy storage systems are in use globally in increasing numbers . No codes pertaining specifically to flywheel energy storage exist. A number of industrial incidents have occurred. This protocol recommends a technical basis for safe flywheel de sign and operation for consideration by flywheel developers, users of flywheel systems and standards setting organizations.

Bridging recommendation and adaptation: Generic Adaptation Framework - Twittomender compliance study

NARCIS (Netherlands)

Hannon, J.; Knutov, E.; De Bra, P.M.E.; Pechenizkiy, M.; McCarthy, K.; Smyth, B.; Pechenizkiy, M.; Knutov, E.; Yudelson, M.; Abel, F.; Houben, G.J.P.M.; Herder, E.

2012-01-01

In this paper we consider Recommender System (RS) modeling in terms of Adaptive Hypermedia Systems (AHS) and investigate AHS and RS functionality compliance in terms of common features, functionality, building blocks and composition of the system. We bring up complementary aspects of adaptation,

Noble metals-compatible melter features development Phase 1: Establishing functional and design criteria and design concepts

International Nuclear Information System (INIS)

Elmore, M.R.; Siemens, D.H.; Chapman, C.C.

1996-03-01

Premature failures have occurred in melters at Japan's Tokai Mockup Facility and at the Federal Republic of Germany (FRG) PAMELA plant during processing of feeds with high levels of noble metals. Melter failure was due to the accumulation of an electrically conductive, noble metals-containing precipitates in the glass, that then resulted in short circuiting of the electrodes. A comparison was made of the anticipated Hanford Waste Vitrification Plant (HWVP) feed with the feeds processed in the FRG and Japanese melters. The evaluation showed that comparable levels of noble metals and other potential precipitate-forming components (e.g. Cr/Fe/Ni-spinels) exist in the HWVP feed. As a result, the HWVP project made a decision to modify the present reference melter design to include features to prevent the precipitation and accumulation or otherwise accommodate precipitated phases on a routine basis without loss of production capacity

Design Lessons Drawn from the Decommissioning of Nuclear Facilities

International Nuclear Information System (INIS)

2011-05-01

This report provides an updated compilation incorporating the most recent lessons learned from decommissioning and remediation projects. It is intended as a 'road map' to those seeking to apply these lessons. The report presents the issues in a concise and systematic manner, along with practical, thought-provoking examples. The most important lessons learned in recent years are organized and examined to enable the intended audience to gauge the importance of this aspect of the planning for new nuclear facilities. These will be of special interest to those seeking to construct nuclear facilities for the first time. In Sections 1 and 2, the current situation in the field of decommissioning is reviewed and the relevance and importance of beneficial design features is introduced. A more detailed review of previous and current lessons learned from decommissioning is given in Section 3 where different aspects of the decommissioning process are analysed. From this analysis beneficial design features have been extracted and identified in Section 4 which includes two comprehensive tables where brief descriptions of the features are summarized and responsibilities are identified. Conclusions and key design features and key recommendations are given in Section 5. Two Annexes are included to provide lessons from past projects and past experience and to record notes and extracts taken from a comprehensive list of publications listed in the References on page 47.

Application of ICRP recommendations to radioactive waste isolation

International Nuclear Information System (INIS)

Beninson, D.; Lindell, B.

1984-01-01

Some radioactive waste categories require isolation from the biosphere for extended periods of time. Various mechanisms can be expected in the future leakage of radionuclides; some are the result of 'normal', expected processes, while others would be the result of random disruptive events. In the second case, the exposures can only be evaluated on a probabilistic basis. Nevertheless, the three basic principles for protection usually recommended by ICRP still apply: individual risk limitation, optimization of protection, and justification of practice. In the individual-related assessment, the requirement should be that the overall probability of death from exposure to waste products (considering both the probability of dose and the probability of death, given the dose) should not exceed the probability of death at the dose 'upper bound' that national authorities would designate for the practice. In the source-related assessment for optimization of protection, the detriment should be assessed over relevant time periods and be the basis for marginal cost-benefit analysis of the various potential improvements in the combined isolation provided by the engineering and geological features. (author)

Recommended radiological controls for tritium operations

International Nuclear Information System (INIS)

Mansfield, G.

1992-01-01

This informal report presents recommendations for an adequate radiological protection program for tritium operations. Topics include hazards analysis, facility design, personnel protection equipment, training, operational procedures, radiation monitoring, to include surface and airborne tritium contamination, and program management

Five features of value-based insurance design plans were associated with higher rates of medication adherence.

Science.gov (United States)

Choudhry, Niteesh K; Fischer, Michael A; Smith, Benjamin F; Brill, Gregory; Girdish, Charmaine; Matlin, Olga S; Brennan, Troyen A; Avorn, Jerry; Shrank, William H

2014-03-01

Value-based insurance design (VBID) plans selectively lower cost sharing to increase medication adherence. Existing plans have been structured in a variety of ways, and these variations could influence the effectiveness of VBID plans. We evaluated seventy-six plans introduced by a large pharmacy benefit manager during 2007-10. We found that after we adjusted for the other features and baseline trends, VBID plans that were more generous, targeted high-risk patients, offered wellness programs, did not offer disease management programs, and made the benefit available only for medication ordered by mail had a significantly greater impact on adherence than plans without these features. The effects were as large as 4-5 percentage points. These findings can provide guidance for the structure of future VBID plans.

What Is the Optimal Threshold at Which to Recommend Breast Biopsy?

OpenAIRE

Burnside, Elizabeth S.; Chhatwal, Jagpreet; Alagoz, Oguzhan

2012-01-01

Background A 2% threshold, traditionally used as a level above which breast biopsy recommended, has been generalized to all patients from several specific situations analyzed in the literature. We use a sequential decision analytic model considering clinical and mammography features to determine the optimal general threshold for image guided breast biopsy and the sensitivity of this threshold to variation of these features. Methodology/Principal Findings We built a decision analytical model c...

Toward the Target Model 2.0. Policy Recommendations for a Sustainable EU Power Market Design. Executive summary

International Nuclear Information System (INIS)

Roques, Fabien; Perekhodtsev, Dmitri; Verhaeghe, Charles

2015-06-01

One of the 10 key priorities of the new European Commission President Jean-Claude Juncker consists of 'reform(ing) and reorganis(ing) Europe's energy policy into a new European Energy Union'. The Energy Union work programme released on 25 February 2015 suggests that a new electricity market design is needed in order to tackle Europe's chosen policy objectives of de-carbonisation whilst maintaining security of supply. The current regulatory and market framework does not provide a sound basis for the investments needed to maintain security of supply and de-carbonise the power sector at an affordable cost. As policy priorities in favour of de-carbonisation and maintaining security of supply have taken centre stage on the policy agenda in the past decade, the design of liberalised electricity markets has failed to evolve and be reconciled with these new priorities. In addition, the issues of competitiveness and affordability of electricity in Europe remain central in the discussions about the market framework. The objective of this study is to assess the deficiencies and gaps in the current European Target Model and the wider regulatory framework for power generation and to propose a number of policy recommendations for improvement. Recognising the need for 'fresh thinking' on the issue, this study looks outside Europe to learn the lessons from experiences with a range of alternative market designs that exist around the globe. The study provides a comprehensive assessment of the issues with current European electricity markets. The study investigates the lessons from market reforms in North America and in Latin America in the past decade to identify 'out of the box' thinking to fill the gaps in the current European Target model. This report presents some of the research findings and concludes with a set of alternative potential directions for reform of European power markets models in the long term, as well as a number of

Training Research: Practical Recommendations for Maximum Impact

Science.gov (United States)

Beidas, Rinad S.; Koerner, Kelly; Weingardt, Kenneth R.; Kendall, Philip C.

2011-01-01

This review offers practical recommendations regarding research on training in evidence-based practices for mental health and substance abuse treatment. When designing training research, we recommend: (a) aligning with the larger dissemination and implementation literature to consider contextual variables and clearly defining terminology, (b) critically examining the implicit assumptions underlying the stage model of psychotherapy development, (c) incorporating research methods from other disciplines that embrace the principles of formative evaluation and iterative review, and (d) thinking about how technology can be used to take training to scale throughout all stages of a training research project. An example demonstrates the implementation of these recommendations. PMID:21380792

Housing Stakeholder Preferences for the "Soft" Features of Sustainable and Healthy Housing Design in the UK.

Science.gov (United States)

Prochorskaite, Agne; Couch, Chris; Malys, Naglis; Maliene, Vida

2016-01-07

It is widely recognised that the quantity and sustainability of new homes in the UK need to increase. However, it is important that sustainable housing is regarded holistically, and not merely in environmental terms, and incorporates elements that enhance the quality of life, health and well-being of its users. This paper focuses on the "soft" features of sustainable housing, that is, the non-technological components of sustainable housing and neighbourhood design that can impact occupants' health and well-being. Aims of the study are to ascertain the relative level of importance that key housing stakeholders attach to these features and to investigate whether the opinions of housing users and housing providers are aligned with regards to their importance. An online survey was carried out to gauge the level of importance that the key stakeholders, such as housing users, local authorities, housing associations, and developers (n = 235), attach to these features. Results revealed that while suitable indoor space was the feature regarded as most important by all stakeholders, there were also a number of disparities in opinion between housing users and housing providers (and among the different types of providers). This implies a scope for initiatives to achieve a better alignment between housing users and providers.

Recommendations on X80 steel for the design of hydrogen gas transmission pipelines

International Nuclear Information System (INIS)

Briottet, L.; Batisse, R.; De Dinechin, G.; Langlois, P.; Thiers, L.

2012-01-01

By limiting the pipes thickness necessary to sustain high pressure, high-strength steels could prove economically relevant for transmitting large gas quantities in pipelines on long distance. Up to now, the existing hydrogen pipelines have used lower-strength steels to avoid any hydrogen embrittlement. The CATHY-GDF project, funded by the French National Agency for Research, explored the ability of an industrial X80 grade for the transmission of pressurized hydrogen gas in large diameter pipelines. This project has developed experimental facilities to test the material under hydrogen gas pressure. Indeed, tensile, toughness, crack propagation and disc rupture tests have been performed. From these results, the effect of hydrogen pressure on the size of some critical defects has been analyzed allowing proposing some recommendations on the design of X80 pipe for hydrogen transport. Cost of Hydrogen transport could be several times higher than natural gas one for a given energy amount. Moreover, building hydrogen pipeline using high grade steels could induce a 10 to 40% cost benefit instead of using low grade steels, despite their lower hydrogen susceptibility. (authors)

Towards Small-Sized Long Tail Business with the Dual-Directed Recommendation System

Science.gov (United States)

Takahashi, Masakazu; Yamada, Takashi; Tsuda, Kazuhiko; Terano, Takao

This paper describes a novel architecture to promote retail businesses using information recommendation systems. The main features of the architecture are 1) Dual-directed Recommendation system, 2) Portal site for three kinds of users: Producers, Retailers, and Consumers, which are considered to be Prosumers, and 3) Agent-based implementation. We have developed a web-based system DAIKOC (Dynamic Advisor for Information and Knowledge Oriented Communities) with the above architecture. In this paper, we focus on the recommendation functions to extract the items that will achieve the large sales in the future from the ID (IDentification)-POS (Point-Of-Sales) data.

Improving Recommendations in Tag-based Systems with Spectral Clustering of Tag Neighbors

DEFF Research Database (Denmark)

Pan, Rong; Xu, Guandong; Dolog, Peter

2012-01-01

Tag as a useful metadata reflects the collaborative and conceptual features of documents in social collaborative annotation systems. In this paper, we propose a collaborative approach for expanding tag neighbors and investigate the spectral clustering algorithm to filter out noisy tag neighbors...... in order to get appropriate recommendation for users. The preliminary experiments have been conducted on MovieLens dataset to compare our proposed approach with the traditional collaborative filtering recommendation approach and naive tag neighbors expansion approach in terms of precision, and the result...... demonstrates that our approach could considerably improve the performance of recommendations....

Realizing drug repositioning by adapting a recommendation system to handle the process.

Science.gov (United States)

Ozsoy, Makbule Guclin; Özyer, Tansel; Polat, Faruk; Alhajj, Reda

2018-04-12

Drug repositioning is the process of identifying new targets for known drugs. It can be used to overcome problems associated with traditional drug discovery by adapting existing drugs to treat new discovered diseases. Thus, it may reduce associated risk, cost and time required to identify and verify new drugs. Nowadays, drug repositioning has received more attention from industry and academia. To tackle this problem, researchers have applied many different computational methods and have used various features of drugs and diseases. In this study, we contribute to the ongoing research efforts by combining multiple features, namely chemical structures, protein interactions and side-effects to predict new indications of target drugs. To achieve our target, we realize drug repositioning as a recommendation process and this leads to a new perspective in tackling the problem. The utilized recommendation method is based on Pareto dominance and collaborative filtering. It can also integrate multiple data-sources and multiple features. For the computation part, we applied several settings and we compared their performance. Evaluation results show that the proposed method can achieve more concentrated predictions with high precision, where nearly half of the predictions are true. Compared to other state of the art methods described in the literature, the proposed method is better at making right predictions by having higher precision. The reported results demonstrate the applicability and effectiveness of recommendation methods for drug repositioning.

Power/Energy Estimator for Designing WSN Nodes with Ambient Energy Harvesting Feature

Directory of Open Access Journals (Sweden)

Jutel Dominique

2011-01-01

Full Text Available Abstract Wireless Sensor Networks (WSNs consist of spatially distributed autonomous sensors to cooperatively monitor physical conditions. Thus, the node battery autonomy is critical. To outperform it, most WSNs rely on the harvesting capability. As nodes can recharge whenever energy is available, the problem is to determine at design time the node autonomy. For our project, we solve it by creating a power/energy estimator that simulates business scenarios to predict node autonomy; the estimation concerns both power and energy features. Based on node architecture configuration, its Dynamic Power Management (DPM policy, and environmental conditions, we present a simulator that helps identify power consumption hot spots and make critical choices during the system design. It also helps to scale the energy storage system as well as the energy harvesters correctly. The hardware part is modelled using the FLPA methodology to develop different node component models with a variable accuracy. For the logical part, we developped a specific DPM by integrating meteorology and weather forecast behaviours. The novelty comes from the ability to simulate the WSN harvesting capability and to estimate at runtime the remaining duration of each service.

May I Suggest? Comparing Three PLE Recommender Strategies

Directory of Open Access Journals (Sweden)

Felix Mödritscher

2011-11-01

Full Text Available Personal learning environment (PLE solutions aim at empowering learners to design (ICT and web-based environments for their learning activities, mashingup content and people and apps for different learning contexts. Widely used in other application areas, recommender systems can be very useful for supporting learners in their PLE-based activities, to help discover relevant content, peers sharing similar learning interests or experts on a specific topic. In this paper we examine the utilization of recommender technology for PLEs. However, being confronted by a variety of educational contexts we present three strategies for providing PLE recommendations to learners. Consequently, we compare these recommender strategies by discussing their strengths and weaknesses in general.

A Hybrid Recommender System Based on User-Recommender Interaction

OpenAIRE

Zhang, Heng-Ru; Min, Fan; He, Xu; Xu, Yuan-Yuan

2015-01-01

Recommender systems are used to make recommendations about products, information, or services for users. Most existing recommender systems implicitly assume one particular type of user behavior. However, they seldom consider user-recommender interactive scenarios in real-world environments. In this paper, we propose a hybrid recommender system based on user-recommender interaction and evaluate its performance with recall and diversity metrics. First, we define the user-recommender interaction...

The Identification, Implementation, and Evaluation of Critical User Interface Design Features of Computer-Assisted Instruction Programs in Mathematics for Students with Learning Disabilities

Science.gov (United States)

Seo, You-Jin; Woo, Honguk

2010-01-01

Critical user interface design features of computer-assisted instruction programs in mathematics for students with learning disabilities and corresponding implementation guidelines were identified in this study. Based on the identified features and guidelines, a multimedia computer-assisted instruction program, "Math Explorer", which delivers…

Universal Instructional Design Principles for Moodle

Directory of Open Access Journals (Sweden)

Tanya Elias

2010-05-01

Full Text Available The paper identifies a set of universal instructional design (UID principles appropriate to distance education (DE and tailored to the needs of instructional designers and instructors teaching online. These principles are then used to assess the accessibility level of a sample online course and the availability of options in its LMS platform (Moodle to increase course accessibility. Numerous accessibility-sensitive plug-in modules are found to be available to Moodle users, though relatively few features were included in the sample course analysed. This may be because they have not been made available to instructors at the institutional level. The paper offers a series of recommendations to improve the accessibility of online DE to learners with diverse abilities, disabilities, and needs.

Proposed draft standard ANS 11.18: recommendations to facilitate decontamination and decommissioning

International Nuclear Information System (INIS)

Jenkins, C.E.; LaGuardia, T.S.; Jones, J.W.

1981-01-01

The purpose of ANS Standard 11.18 is to recommend design guides to facilitate decontamination and eventual decommissioning of a remotely operated radioactive facility. This design guide contains generic recommendations to assist in the planning, selection and arrangement of equipment and materials, and the protection of surfaces to enhance system decontamination and disassembly

Customer satisfaction surveys: Methodological recommendations for financial service providers

Directory of Open Access Journals (Sweden)

Đorđić Marko

2010-01-01

Full Text Available This methodological article investigates practical challenges that emerge when conducting customer satisfaction surveys (CSS for financial service providers such as banks, insurance or leasing companies, and so forth. It displays methodological recommendations in reference with: (a survey design, (b sampling, (c survey method, (d questionnaire design, and (e data acquisition. Article provides appropriate explanations that usage of: two-stage survey design, SRS method, large samples, and rigorous fieldwork preparation can enhance the overall quality of CSS in financial services. Proposed methodological recommendations can primarily be applied to the primary quantitative marketing research in retail financial services. However, majority of them can be successfully applied when conducting primary quantitative marketing research in corporate financial services as well. .

Quality assurance in the procurement, design and manufacture of nuclear fuel assemblies

International Nuclear Information System (INIS)

1983-01-01

This Safety Guide provides requirements and recommendations for quality assurance programmes that are relevant for the unique features of the procurement, design, manufacture, inspection, testing, packaging, shipping, storage, and receiving inspection of fuel assemblies for nuclear power plants. The generic quality assurance requirements of the Code and related Safety Guides are referred to where applicable, and are duplicated in this document where increased emphasis is desirable

State-of-the-art of wind turbine design codes: main features overview for cost-effective generation

Energy Technology Data Exchange (ETDEWEB)

Molenaar, D-P.; Dijkstra, S. [Delft University of Technology (Netherlands). Mechanical Engineering Systems and Control Group

1999-07-01

For successful large-scale application of wind energy, the price of electricity generated by wind turbines should decrease. Model-based control can be important since it has the potential to reduce fatigue loads, while simultaneously maintaining a desired amount of energy production. The controller synthesis, however, requires a mathematical model describing the most important dynamics of the complete wind turbine. In the wind energy community there is a wide variety in codes used to model a wind turbine's dynamic behaviour or to carry out design calculations. In this paper, the main features of the state-of-the-art wind turbine design codes have been investigated in order to judge the appropriateness of using one of these for the modeling, identification and control of flexible, variable speed wind turbines. It can be concluded that, although the sophistication of the design codes has increased enormously over the last two decades, they are, in general, not suitable for the design, and easy implementation of optimal operating strategies.

Where to publish? Development of a recommender system for academic publishing

OpenAIRE

Gutknecht, Christian

2014-01-01

This thesis using the method of research design is about creating a journal recommendation system for authors. Existing systems like JANE or whichjournal.com offer recommendations based on similarities of the content. This study invests how more sophisticated factors like openness, price (subscription or article processing charge), speed of publication can be included in the ranking of a recommendation system. The recommendation should also consider the expectations from other stakeholders li...

Improved personalized recommendation based on a similarity network

Science.gov (United States)

Wang, Ximeng; Liu, Yun; Xiong, Fei

2016-08-01

A recommender system helps individual users find the preferred items rapidly and has attracted extensive attention in recent years. Many successful recommendation algorithms are designed on bipartite networks, such as network-based inference or heat conduction. However, most of these algorithms define the resource-allocation methods for an average allocation. That is not reasonable because average allocation cannot indicate the user choice preference and the influence between users which leads to a series of non-personalized recommendation results. We propose a personalized recommendation approach that combines the similarity function and bipartite network to generate a similarity network that improves the resource-allocation process. Our model introduces user influence into the recommender system and states that the user influence can make the resource-allocation process more reasonable. We use four different metrics to evaluate our algorithms for three benchmark data sets. Experimental results show that the improved recommendation on a similarity network can obtain better accuracy and diversity than some competing approaches.

EANM-EORTC general recommendations for sentinel node diagnostics in melanoma

DEFF Research Database (Denmark)

Chakera, Annette H; Hesse, Birger; Burak, Zeynep

2009-01-01

-draining sentinel lymph nodes. If specific recommendations given cannot be based on evidence from original, scientific studies, referral is given to "general consensus" and similar expressions. The recommendations are designed to assist in the practice of referral to, performance, interpretation and reporting...

Left ventricular assist device (lvad design features: literature review

Directory of Open Access Journals (Sweden)

Yu. V. Bogdanova

2014-01-01

long-term systems of artificial circulatory support is guided by German Heart Center in Berlin (DHZB [3].The well-known VAD commercial models were created by Berlin Heart (Germany, HeartWare Int. (USA, Thoratec (USA, Abiomed Inc. (USA etc.Works devoted to VAD systems can be classified in field of research, according to the above subsystems. Concerning the blood pump - a large number of works is devoted to the study of blood behavior in the pump chamber: to modeling questions [6-24], with an emphasis on red blood cells damage - hemolysis [10, 20, 23, 27-32]. Much less works are devoted to the research of rotor (impeller dynamics of the blood pump [33-36]. Application of magnetic bearings in VAD and magnetic levitation control tasks of are addressed in [33-39]. Biomedical part of design, associated with the selection and development of biocompatible materials is considered in [26, 32, 40-43]. Features of power supply systems and control of VAD mode work are given in works [26, 44-50].The integrated approach to VAD development with an emphasis on design phases is presented in the works [7, 51]. In [2] the problem of artificial heart creation in Russia on 2006 is clearly reflected. The most comprehensive systematic review of existing VAD systems with description of specifications is given in the work [54], as well as in [24, 26, 55-57]. Brief review of existing methodologies and approaches to the design of artificial heart (AH and circulatory support system (CSS are presented in the works [58, 59]. The problem of creation of mechatronic modules of AH and CSS systems is studied in [60, 61].With the purpose of further research in the development of VAD system, this work is the study of up to date problem state. The main part of the work consists of three sections. The first section is devoted to the study of blood pump. The second and the third sections are devoted to power supply system and control system respectively. Based on this analysis, the requirements to VAD

Digging deeper into platform game level design: session size and sequential features

DEFF Research Database (Denmark)

Shaker, Noor; Yannakakis, Georgios N.; Togelius, Julian

2012-01-01

A recent trend within computational intelligence and games research is to investigate how to affect video game players’ in-game experience by designing and/or modifying aspects of game content. Analysing the relationship between game content, player behaviour and self-reported affective states...... constitutes an important step towards understanding game experience and constructing effective game adaptation mechanisms. This papers reports on further refinement of a method to understand this relationship by analysing data collected from players, building models that predict player experience...... and analysing what features of game and player data predict player affect best. We analyse data from players playing 780 pairs of short game sessions of the platform game Super Mario Bros, investigate the impact of the session size and what part of the level that has the major affect on player experience...

License application design selection feature report: Additive and fillers design feature 19

International Nuclear Information System (INIS)

Massari, J.R.

1999-01-01

The estimated additional total system life-cycle cost for each of the filler options in 1999 dollars is as follows: $923.4 million for the iron oxide option, $42.4 million to $966.4 million (depending on the extent of surface facility involvement required) for the partial iron shot fill option, $1,012 million for the complete iron shot fill option, and $134.7 million for the integral filler option (Appendix A). All of the filler options evaluated showed improvements in some aspects of pre- and post-closure waste package and repository performance. However, all of the options, except for the integral filler option, negatively impacted other areas of performance, required modification to surface facility design and operations, and invoked additional uncertainty. The iron oxide filler option will require further testing to measure thermal conductivity to ensure that peak cladding temperatures will not exceed the 350 C limit. The complete iron shot fill option may require structural improvements to the waste package design (use of partial shot fill may eliminate this concern). Both the iron shot and iron oxide options will also require further testing to confirm that the conceptual loading strategy will efficiently load a waste package in a timely manner. In addition, both shot and oxide options will require further testing to develop models for their potential to provide resistance to water flow, and, in the case of iron shot, act as an oxygen getter. Finally, uncertainty also exists as to whether the iron shot option will damage the cladding if sufficient corrosion of the shot occurs. Based on the results presented in this evaluation, the integral filler option appears to be the simplest and most cost efficient method for achieving modest improvements in pre- and post-closure performance. Since unqualified inputs were used in the development of this evaluation, they should be considered TBV (to be verified). This document will not directly support any construction

PIPEX - A model of a design concept for reprocessing plants with improved containment and surveillance features

International Nuclear Information System (INIS)

1979-03-01

This paper explains that the PIPEX concept is essentially a reprocessing plant using the PUREX process but with in-built improved containment and surveillance features resulting in increased health protection and environmental safety as well as higher resistance to diversion of fissile material. The paper gives a general description of the design and operating philosophy of such a plant and goes on to examine the safeguards and safety principles and implications

Comparison of patellofemoral outcomes after TKA using two prostheses with different patellofemoral design features.

Science.gov (United States)

Bae, Dae Kyung; Baek, Jong Hun; Yoon, Kyung Tack; Son, Hyuck Sung; Song, Sang Jun

2017-12-01

The purpose of the present study was to compare the clinical and radiographic results after TKA using two prostheses with different sagittal patellofemoral design features, including outcomes related to compatibility of the patellofemoral joint. The clinical and radiographic results of 81 patients (100 knees) who underwent TKA using the specific prosthesis (group A) were compared with those in a control group who underwent TKA using the other prosthesis (group B). The presence of anterior knee joint pain, patellar crepitation, and patellar clunk syndrome was also checked. The function score and maximum flexion angle at the last follow-up were slightly better in group A than those in group B (92.0 ± 2.3 vs. 90.6 ± 4.2) (133.6° ± 8.4° vs. 129.6° ± 11.4°). Anterior knee pain was observed in 6 knees and patellar crepitation in four knees in group A. In group B, these symptoms were observed in 22 knees and 18 knees, respectively. There was no patellar clunk syndrome in either group. The alignment was corrected with satisfactory positioning of components. The patellar height remained unchanged after TKA in the two groups. The differences between preoperative and postoperative patellar tilt angle and patellar translation were small. When comparing the clinical and radiographic results after TKA using two prostheses with different sagittal patellofemoral design features, TKA using the specific prosthesis provided satisfactory results with less clinical symptoms related to the patellofemoral kinematics with TKA using the other prosthesis. III.

Design features and performance of the LAMPF high-intensity beam area

International Nuclear Information System (INIS)

Agnew, L.; Grisham, D.; Macek, R.J.; Sommer, W.F.; Werbeck, R.D.

1983-01-01

LAMPF is a multi-purpose high-intensity meson factory capable of producing a 1 mA beam of 800-MeV protons. The three target cells and the beam stop facilities in the high intensity area have many special design features that are required for operation in the presence of high heat loads and intense radiation fields where accessibility is extremely limited. Reliable targets, beam windows, beam stops, beam transport and diagnostic components, vacuum enclosures, and auxiliary systems have been developed. Sophisticated remote-handling systems are employed for maintenance. Complex protection systems have been developed to guard against damage caused by errant beam. Beam availability approaching 90% has been achieved at currents of 600 to 700 μA. A new facility for direct proton and neutron radiation effects studies will be installed in 1985. The new facility will provide an integrated spallation neutron flux of up to 5 x 10 17 m -2 s -1 and will anable proton irradiation studies in the primary beam

75 FR 33311 - Guidance for Industry on Bioequivalence Recommendations for Specific Products; Availability

Science.gov (United States)

2010-06-11

... available recommendations on how to design product-specific BE studies to support ANDAs. Under this process... thinking on a new process for making available to sponsors FDA guidance on how to design product-specific... ``Bioequivalence Recommendations for Specific Products.'' This guidance describes a new process for making...

Design and operating features of the high-level waste vitrification system for the West Valley demonstration project

International Nuclear Information System (INIS)

Siemens, D.H.; Beary, M.M.; Barnes, S.M.; Berger, D.N.; Brouns, R.A.; Chapman, C.C.; Jones, R.M.; Peters, R.D.; Peterson, M.E.

1986-03-01

A liquid-fed joule-heated ceramic melter system is the reference process for immobilization of the high-level liquid waste in the US and several foreign countries. This system has been under development for over ten years at Pacific Northwest Laboratory and other national laboratories operated for the US Department of Energy. Pacific Northwest Laboratory contributed to this research through its Nuclear Waste Treatment Program and used applicable data to design and test melters and related systems using remote handling of simulated radioactive wastes. This report describes the equipment designed in support of the high-level waste vitrification program at West Valley, New York. Pacific Northwest Laboratory worked closely with West Valley Nuclear Services Company to design a liquid-fed ceramic melter, a liquid waste preparation and feed tank and pump, an off-gas treatment scrubber, and an enclosed turntable for positioning the waste canisters. Details of these designs are presented including the rationale for the design features and the alternatives considered

Design and Realization of Music Retrieval System Based on Feature Content

Directory of Open Access Journals (Sweden)

Li Lei

2015-01-01

Full Text Available As computer technology develops rapidly, retrieval systems have also undergone great changes. People are no longer contented with singular retrieval means, but are trying many other ways to retrieve feature content. When it comes to music, however, the complexity of sound is still preventing its retrieval from moving further forward. To solve this problem, systematic analysis and study is carried out on music retrieval system based on feature content. A music retrieval system model based on feature content consisting of technical approaches for processing and retrieving of extraction symbols of music feature content is built and realized. An SML model is proposed and tested on two different types of song sets. The result shows good performance of the system. Besides, the shortfalls of the model are also noted and the future prospects of the music retrieval system based on feature content are outlined.

Areal thermal loading recommendations for nuclear waste repositories in salt

International Nuclear Information System (INIS)

Russell, J.E.

1979-06-01

This document gives a wider understanding of the history of the recommended thermal loadings in salt for both high-level waste (HLW) from fresh UO 2 -fueled, light-water reactors (LWR) with no recycle and spent unreprocessed fuel (SURF) from LWRs. Aspects of the current recommendations that need further study are identified. Finally, an interim set of design thermal-loading recommendations are given that have a common rationale of satisfying performance limits within our current state of knowledge. These recommendations are made on a generic rather than a site-specific basis. 11 figures, 5 tables

A combined Fisher and Laplacian score for feature selection in QSAR based drug design using compounds with known and unknown activities.

Science.gov (United States)

Valizade Hasanloei, Mohammad Amin; Sheikhpour, Razieh; Sarram, Mehdi Agha; Sheikhpour, Elnaz; Sharifi, Hamdollah

2018-02-01

Quantitative structure-activity relationship (QSAR) is an effective computational technique for drug design that relates the chemical structures of compounds to their biological activities. Feature selection is an important step in QSAR based drug design to select the most relevant descriptors. One of the most popular feature selection methods for classification problems is Fisher score which aim is to minimize the within-class distance and maximize the between-class distance. In this study, the properties of Fisher criterion were extended for QSAR models to define the new distance metrics based on the continuous activity values of compounds with known activities. Then, a semi-supervised feature selection method was proposed based on the combination of Fisher and Laplacian criteria which exploits both compounds with known and unknown activities to select the relevant descriptors. To demonstrate the efficiency of the proposed semi-supervised feature selection method in selecting the relevant descriptors, we applied the method and other feature selection methods on three QSAR data sets such as serine/threonine-protein kinase PLK3 inhibitors, ROCK inhibitors and phenol compounds. The results demonstrated that the QSAR models built on the selected descriptors by the proposed semi-supervised method have better performance than other models. This indicates the efficiency of the proposed method in selecting the relevant descriptors using the compounds with known and unknown activities. The results of this study showed that the compounds with known and unknown activities can be helpful to improve the performance of the combined Fisher and Laplacian based feature selection methods.

Automatic feature design for optical character recognition using an evolutionary search procedure.

Science.gov (United States)

Stentiford, F W

1985-03-01

An automatic evolutionary search is applied to the problem of feature extraction in an OCR application. A performance measure based on feature independence is used to generate features which do not appear to suffer from peaking effects [17]. Features are extracted from a training set of 30 600 machine printed 34 class alphanumeric characters derived from British mail. Classification results on the training set and a test set of 10 200 characters are reported for an increasing number of features. A 1.01 percent forced decision error rate is obtained on the test data using 316 features. The hardware implementation should be cheap and fast to operate. The performance compares favorably with current low cost OCR page readers.

The effectiveness of breakfast recommendations on weight loss

DEFF Research Database (Denmark)

Dhurandhar, Emily J; Dawson, John; Alcorn, Amy

2014-01-01

BACKGROUND: Breakfast is associated with lower body weight in observational studies. Public health authorities commonly recommend breakfast consumption to reduce obesity, but the effectiveness of adopting these recommendations for reducing body weight is unknown.OBJECTIVE: We tested the relative...... effectiveness of a recommendation to eat or skip breakfast on weight loss in adults trying to lose weight in a free-living setting. DESIGN: We conducted a multisite, 16-wk, 3-parallel-arm randomized controlled trial in otherwise healthy overweight and obese adults [body mass index (in kg/m(2)) between 25 and 40.......53 ± 1.16, -0.59 ± 1.06, and -0.71 ± 1.17 kg for the control, breakfast, and NB groups, respectively. Self-reported compliance with the recommendation was 93.6% for the breakfast group and 92.4% for the NB group.Conclusions: A recommendation to eat or skip breakfast for weight loss was effective...

WASTE PACKAGE TRANSPORTER DESIGN

International Nuclear Information System (INIS)

Weddle, D.C.; Novotny, R.; Cron, J.

1998-01-01

The purpose of this Design Analysis is to develop preliminary design of the waste package transporter used for waste package (WP) transport and related functions in the subsurface repository. This analysis refines the conceptual design that was started in Phase I of the Viability Assessment. This analysis supports the development of a reliable emplacement concept and a retrieval concept for license application design. The scope of this analysis includes the following activities: (1) Assess features of the transporter design and evaluate alternative design solutions for mechanical components. (2) Develop mechanical equipment details for the transporter. (3) Prepare a preliminary structural evaluation for the transporter. (4) Identify and recommend the equipment design for waste package transport and related functions. (5) Investigate transport equipment interface tolerances. This analysis supports the development of the waste package transporter for the transport, emplacement, and retrieval of packaged radioactive waste forms in the subsurface repository. Once the waste containers are closed and accepted, the packaged radioactive waste forms are termed waste packages (WP). This terminology was finalized as this analysis neared completion; therefore, the term disposal container is used in several references (i.e., the System Description Document (SDD)) (Ref. 5.6). In this analysis and the applicable reference documents, the term ''disposal container'' is synonymous with ''waste package''

Peer-Based Social Media Features in Behavior Change Interventions: Systematic Review

Science.gov (United States)

Weal, Mark; Morrison, Leanne; Yardley, Lucy

2018-01-01

Background Incorporating social media features into digital behavior change interventions (DBCIs) has the potential to contribute positively to their success. However, the lack of clear design principles to describe and guide the use of these features in behavioral interventions limits cross-study comparisons of their uses and effects. Objective The aim of this study was to provide a systematic review of DBCIs targeting modifiable behavioral risk factors that have included social media features as part of their intervention infrastructure. A taxonomy of social media features is presented to inform the development, description, and evaluation of behavioral interventions. Methods Search terms were used in 8 databases to identify DBCIs that incorporated social media features and targeted tobacco smoking, diet and nutrition, physical activities, or alcohol consumption. The screening and review process was performed by 2 independent researchers. Results A total of 5264 articles were screened, and 143 articles describing a total of 134 studies were retained for full review. The majority of studies (70%) reported positive outcomes, followed by 28% finding no effects with regard to their respective objectives and hypothesis, and 2% of the studies found that their interventions had negative outcomes. Few studies reported on the association between the inclusion of social media features and intervention effect. A taxonomy of social media features used in behavioral interventions has been presented with 36 social media features organized under 7 high-level categories. The taxonomy has been used to guide the analysis of this review. Conclusions Although social media features are commonly included in DBCIs, there is an acute lack of information with respect to their effect on outcomes and a lack of clear guidance to inform the selection process based on the features’ suitability for the different behaviors. The proposed taxonomy along with the set of recommendations included

77 FR 10535 - Final Guidances for Industry Describing Product-Specific Bioequivalence Recommendations...

Science.gov (United States)

2012-02-22

... recommendations provide product-specific guidance on the design of BE studies to support abbreviated new drug... the process that would be used to make product-specific BE recommendations available to the public on... ``Bioequivalence Recommendations for Specific Products,'' which explained the process that would be used to make...

Recommendations for providing protection during the transport of uranium hexafluoride

International Nuclear Information System (INIS)

1987-06-01

In July 1986 a group of consultants was convened by the IAEA to provide initial guidance on the transport of UF 6 and the regulations for it considering the hazards posed by this material. A Technical Committee meeting was held in November 1986 to finalize the development of the recommendations for providing protection during the transport of UF 6 . This report provides the recommendations resulting from the meetings of these experts. The IAEA recommends that national competent authorities and other relevant national regulatory and standards-related organizations, and appropriate international organizations seriously consider all of the information provided in this report especially the additional requirements set forth in Section III.3 concerning design, manufacturing and testing requirements, design approval requirements, requirements on loading for transport, and requirements for quality assurance and maintenance. This report also deals with United Nations' Recommendations of the Transport of Dangerous Goods, International Modal Regulatory Documents, ANSIN14.1-1982 and ISO/DIS/7195 Standards

Designing and Developing a Novel Hybrid Adaptive Learning Path Recommendation System (ALPRS) for Gamification Mathematics Geometry Course

Science.gov (United States)

Su, Chung-Ho

2017-01-01

Since recommendation systems possess the advantage of adaptive recommendation, they have gradually been applied to e-learning systems to recommend subsequent learning content for learners. However, problems exist in current learning recommender systems available to students in that they are often general learning content and unable to offer…

Recommendation 93-5 Implementation Plan

International Nuclear Information System (INIS)

1994-01-01

On July 19, 1993, the Defense Nuclear Facilities Safety Board (DNFSB) provided to the Secretary of Energy its Recommendation 93-5, which commented on the Hanford Tank Waste Characterization effort. Recommendation 93-5 highlighted the need to accelerate the characterization of the Hanford Site tank wastes to expedite the resolution of identified tank safety issues, and to provide timely design data in support of activities addressing the disposal of the tank wastes. The Department of Energy (DOE) and its prime contractor, Westinghouse Hanford Company (WHC), are in full agreement with the content of Recommendation 93-5 and have prepared this Implementation Plan to document those actions that have been or will be taken to meet Recommendation 93-5. The new Characterization Strategy embodied by this Plan acknowledges that waste distribution within a tank is the critical unknown with respect to successfully characterizing the tank for any Tank Waste Remediation Systems (TWRS) programmatic need. The new strategy has been incorporated into the following seven task: (1) strengthen technical management; (2) accelerate safety related characterization; (3) improve the quality and quantity of sampling (4) streamline tank access; (5) improve the quality and quantity of analyses; (6) improve data management; and (7) change control

The design of hot laboratories

International Nuclear Information System (INIS)

1976-01-01

The need for specialized laboratories to handle radioactive substances of high activity has increased greatly due to the expansion of the nuclear power industry and the widespread use of radioisotopes in scientific research and technology. Such laboratories, which are called hot laboratories, are specially designed and equipped to handle radioactive materials of high activity, including plutonium and transplutonium elements. The handling of plutonium and transplutonium elements presents special radiation-protection and safety problems because of their high specific activity and high radiotoxicity. Therefore, the planning, design, construction and operation of hot laboratories must meet the stringent safety, containment, ventilation, shielding, criticality control and fire-protection requirements. The IAEA has published two manuals in its Safety Series, one on the safety aspects of design and equipment of hot laboratories (SS No.30) and the other on the safe handling of plutonium (SS No.39). The purpose of the symposium in Otaniemi was to collect information on recent developments in the safety features of hot laboratories and to review the present state of knowledge. A number of new developments have taken place as the result of growing sophistication in the philosophy of radiation protection as given in the ICRP recommendations (Report No.22) and in the Agency's basic safety standards (No.9). The topics discussed were safety features of planning and design, air cleaning, transfer and transport systems, criticality control, fire protection, radiological protection, waste management, administrative arrangements and operating experience

Enhanced Access Design Alternative I Study

International Nuclear Information System (INIS)

Eble, G.B.

1999-01-01

The purpose of this document is to evaluate Enhanced Design Alternative (EDA) 1, the low temperature repository design concept (CRWMS M and O 1999a). This technical document will provide supporting information for Site Recommendation (SR) and License Application (LA). Preparation of this evaluation will be in accordance with the technical document preparation plan (TDPP), (CRWMS M and O 1999b). EDA 1, one of five EDAs, was evolved from evaluation of a series of design features and alternatives developed during the first phase of the License Application Design Selection (LADS) process. Low, medium, and high temperature concepts were developed from the design features and alternatives prepared during Phase 1 of the LADS effort (CRWMS M and O 1999a). EDA 1 will first be evaluated against a single Screening Criterion, outlined in CRWMS M and O 1999a, which addresses post-closure performance of the repository. The performance of the repository is defined quantitatively as the peak radiological dose rate to an average individual of a critical group at a distance of 20 km from the repository site within 10,000 years. To satisfy this criterion the peak dose rate must not exceed the anticipated regulatory level of 25 mrem/yr within 10,000 years. If the EDA meets the screening criterion, the EDA will be further evaluated against the LADS Phase 2 Evaluation Criteria contained in CRWMS M and O 1999a

A Knowledge Based Recommender System with Multigranular Linguistic Information

Directory of Open Access Journals (Sweden)

Luis Martinez

2008-08-01

Full Text Available Recommender systems are applications that have emerged in the e-commerce area in order to assist users in their searches in electronic shops. These shops usually offer a wide range of items that cover the necessities of a great variety of users. Nevertheless, searching in such a wide range of items could be a very difficult and time-consuming task. Recommender systems assist users to find out suitable items by means of recommendations based on information provided by different sources such as: other users, experts, item features, etc. Most of the recommender systems force users to provide their preferences or necessities using an unique numerical scale of information fixed in advance. In spite of this information is usually related to opinions, tastes and perceptions, therefore, it seems that is usually better expressed in a qualitative way, with linguistic terms, than in a quantitative way, with precise numbers. We propose a Knowledge Based Recommender System that uses the fuzzy linguistic approach to define a flexible framework to capture the uncertainty of the user's preferences. Thus, this framework will allow users to express their necessities in scales closer to their own knowledge, and different from the scale utilized to describe the items.

Designing a Web Spam Classifier Based on Feature Fusion in the Layered Multi-Population Genetic Programming Framework

Directory of Open Access Journals (Sweden)

Amir Hosein KEYHANIPOUR

2013-11-01

Full Text Available Nowadays, Web spam pages are a critical challenge for Web retrieval systems which have drastic influence on the performance of such systems. Although these systems try to combat the impact of spam pages on their final results list, spammers increasingly use more sophisticated techniques to increase the number of views for their intended pages in order to have more commercial success. This paper employs the recently proposed Layered Multi-population Genetic Programming model for Web spam detection task as well application of correlation coefficient analysis for feature space reduction. Based on our tentative results, the designed classifier, which is based on a combination of easy to compute features, has a very reasonable performance in comparison with similar methods.

Feature of extradosed PC bridge and its design; Daihenshin keburu PC kyo no tokucho to sono sekkei

Energy Technology Data Exchange (ETDEWEB)

Komiya, M. [Japan Bridge and Structure Institute Inc., Tokyo (Japan)

1997-03-31

A PC bridge with the eccentricity of the external cable increased by protruding the deviated member to the outside of the beam for more effective use of the external cable is called a `PC bridge with tendons of large eccentricity.` The extradosed bridge of main beam/cable joint type is a PC bridge with the external cable arranged via a tower-shaped eccentric member provided at the intermediate support, and resembles morphologically a cable stayed bridge having a very low tower. There are two types of extradosed bridges, i.e. a type with concrete coated external cable (cable stayed slab bridge) and the other with non-coated external cable (external cable stayed bridge). Features, structural planning and designing of the general external cable stayed bridge are shown. The features are the possession of intermediate characteristics of those of the PC beam bridge and the PC cable stayed bridge from the viewpoints of structural property, workability, economic efficiency, and scenic property. Outline of the plan, selection of structural data, design of the external cable, and structural characteristics in the ultimate state are discussed. 19 refs., 18 figs., 15 tabs.

Housing Stakeholder Preferences for the “Soft” Features of Sustainable and Healthy Housing Design in the UK

Science.gov (United States)

Prochorskaite, Agne; Couch, Chris; Malys, Naglis; Maliene, Vida

2016-01-01

It is widely recognised that the quantity and sustainability of new homes in the UK need to increase. However, it is important that sustainable housing is regarded holistically, and not merely in environmental terms, and incorporates elements that enhance the quality of life, health and well-being of its users. This paper focuses on the “soft” features of sustainable housing, that is, the non-technological components of sustainable housing and neighbourhood design that can impact occupants’ health and well-being. Aims of the study are to ascertain the relative level of importance that key housing stakeholders attach to these features and to investigate whether the opinions of housing users and housing providers are aligned with regards to their importance. An online survey was carried out to gauge the level of importance that the key stakeholders, such as housing users, local authorities, housing associations, and developers (n = 235), attach to these features. Results revealed that while suitable indoor space was the feature regarded as most important by all stakeholders, there were also a number of disparities in opinion between housing users and housing providers (and among the different types of providers). This implies a scope for initiatives to achieve a better alignment between housing users and providers. PMID:26751465

Mining the preferences of patients for ubiquitous clinic recommendation.

Science.gov (United States)

Chen, Tin-Chih Toly; Chiu, Min-Chi

2018-03-06

A challenge facing all ubiquitous clinic recommendation systems is that patients often have difficulty articulating their requirements. To overcome this problem, a ubiquitous clinic recommendation mechanism was designed in this study by mining the clinic preferences of patients. Their preferences were defined using the weights in the ubiquitous clinic recommendation mechanism. An integer nonlinear programming problem was solved to tune the values of the weights on a rolling basis. In addition, since it may take a long time to adjust the values of weights to their asymptotic values, the back propagation network (BPN)-response surface method (RSM) method is applied to estimate the asymptotic values of weights. The proposed methodology was tested in a regional study. Experimental results indicated that the ubiquitous clinic recommendation system outperformed several existing methods in improving the successful recommendation rate.

Enrichment of Multi-criteria Communities for Context-aware Recommendations

Directory of Open Access Journals (Sweden)

Thuy Ngoc Nguyen

2014-09-01

Full Text Available Recommender systems are designed to help users alleviate the information overload problem by offering personalized recommendations. Most systems apply collaborative filtering to predict individual preferences based on opinions of like-minded people through their ratings on items. Recently, context-aware recommender systems (CARSs are developed to offer users more suitable recommendations by exploiting additional context data such as time, location, etc. However, most CARSs use only ratings as a criterion for building communities, and ignore other available data allowing users to be grouped into communities. This paper presents a novel approach for exploiting multi-criteria communities to provide context-aware recommendations. The main idea of the proposed algorithm is that for a given context, the significance of multi-criteria communities could be different. So communities from the most suitable criteria followed by a learning phase are incorporated into the recommendation process.

Optimal design of a new 3D haptic gripper for telemanipulation, featuring magnetorheological fluid brakes

International Nuclear Information System (INIS)

Nguyen, Q H; Choi, S B; Lee, Y S; Han, M S

2013-01-01

In this research work, a new configuration of a 3D haptic gripper for telemanipulation is proposed and optimally designed. The proposed haptic gripper, featuring three magnetorheological fluid brakes (MRBs), reflects the rolling torque, the grasping force and the approach force from the slave manipulator to the master operator. After describing the operational principle of the haptic gripper, an optimal design of the MRBs for the gripper is performed. The purpose of the optimization problem is to find the most compact MRB that can provide a required braking torque/force to the master operator while the off-state torque/force is kept as small as possible. In the optimal design, different types of MRBs and different MR fluids (MRFs) are considered. In order to obtain the optimal solution of the MRBs, an optimization approach based on finite element analysis (FEA) integrated with an optimization tool is used. The optimal solutions of the MRBs are then obtained and the optimized MRBs for the haptic gripper are identified. In addition, discussions on the optimal solutions and performance of the optimized MRBs are given. (paper)

Developing longitudinal qualitative designs: lessons learned and recommendations for health services research.

Science.gov (United States)

Calman, Lynn; Brunton, Lisa; Molassiotis, Alex

2013-02-06

Longitudinal qualitative methods are becoming increasingly used in the health service research, but the method and challenges particular to health care settings are not well described in the literature.We reflect on the strategies used in a longitudinal qualitative study to explore the experience of symptoms in cancer patients and their carers, following participants from diagnosis for twelve months; we highlight ethical, practical, theoretical and methodological issues that need to be considered and addressed from the outset of a longitudinal qualitative study. Key considerations in undertaking longitudinal qualitative projects in health research, include the use of theory, utilizing multiple methods of analysis and giving consideration to the practical and ethical issues at an early stage. These can include issues of time and timing; data collection processes; changing the topic guide over time; recruitment considerations; retention of staff; issues around confidentiality; effects of project on staff and patients, and analyzing data within and across time. As longitudinal qualitative methods are becoming increasingly used in health services research, the methodological and practical challenges particular to health care settings need more robust approaches and conceptual improvement. We provide recommendations for the use of such designs. We have a particular focus on cancer patients, so this paper will have particular relevance for researchers interested in chronic and life limiting conditions.

Design features which mitigate severe accident challenges in the GE ABWR and SBWR

International Nuclear Information System (INIS)

Buchholz, Carol E.

2004-01-01

A reduction of the requirements for the emergency planning zone (EPZ) is a goal of advanced light water reactors. The technical basis for reducing the EPZ requirements is based on a very low frequency of a severe accident and high confidence that the offsite dose would be low even if a severe accident was to occur. Design features have been included in both the ABWR and SBWR to ensure that both of these goals are achieved. Probabilistic Risk Assessments (PRAs) have been performed for both plants. The PRAs indicate a core damage frequency on the order of IE-7 for both plants. The PRAs also show that the containments will not fail even if a severe accident should occur. The potential offsite is extremely low. (author)

International retrospective cohort study of neural tube defects in relation to folic acid recommendations : are the recommendations working?

NARCIS (Netherlands)

Botto, LD; Lisi, A; Robert-Gnansia, E; Erickson, JD; Vollset, SE; Mastroiacovo, P; Botting, B; Cocchi, G; de Vigan, C; de Walle, H; Feijoo, M; Irgens, LM; McDonnell, B; Merlob, P; Ritvanen, A; Scarano, G; Siffel, C; Metneki, J; Stoll, C; Smithells, R; Goujard, J

2005-01-01

Objective To evaluate the effectiveness of policies and recommendations on folic acid aimed at reducing the occurrence of neural tube defects. Design Retrospective cohort study of births monitored by birth defect registries. Setting 13 birth defects registries monitoring rates of neural tube defects

Innovative small and medium sized reactors: Design features, safety approaches and R and D trends. Final report of a technical meeting

International Nuclear Information System (INIS)

2005-05-01

In order to beat the economy of scale small and medium sized reactors (SMRs) have to incorporate specific design features that result into simplification of the overall plant design, modularization and mass production. Several approaches are being under development and consideration, including the increased use of passive features for reactivity control and reactor shut down, decay heat removal and core cooling, and reliance on the increased margin to fuel failure achieved through the use of advanced high-temperature fuel forms and structural materials. Some SMRs also offer the possibility of very long core lifetimes with burnable absorbers or high conversion ratio in the core. These reactors incorporate increased proliferation resistance and may offer a very attractive solution for the implementation of adequate safeguards in a scenario of global deployment of nuclear power. About 50 concepts and designs of the innovative SMRs are under development in more than 15 IAEA Member States representing both industrialized and developing countries. SMRs are under development for all principle reactor lines, i.e., water cooled, liquid metal cooled, gas cooled, and molten salt cooled reactors, as well as for some non-conventional combinations thereof. Upon a diversity of the conceptual and design approaches to SMRs, it may be useful to identify the so-called enabling technologies that are common to certain reactor types or lines. An enabling technology is the technology that needs to be developed and demonstrated to make a certain reactor concept viable. When a certain technology is common to several SMR concepts or designs, it could benefit from being developed on a common or shared basis. The identification of common enabling technologies could speed up the development and deployment of many SMRs by merging the efforts of their designers through an increased international cooperation. This publication has been prepared through the collaboration of all participants of this

Design basis and design features of WWER-440 model 213 nuclear power plants. Reference plant: Bohunice V2 (Slovakia)

International Nuclear Information System (INIS)

1994-05-01

The prime objective of the IAEA Technical Co-operation Project on Evaluation of Safety Aspects of WWER-440 model 213 NPPs is to co-ordinate and to integrate assistance to national organizations in studying selected aspects of safety for the same type of reactors. Consequently, the study integrated the results generated by national activities carried out in the Czech Republic, Hungary, Slovakia and Ukraine and co-ordinated through the IAEA. Valuable assistance in carrying out the tasks was also provided by Bulgaria and Poland. A set of publications is being prepared to present the results of the project. The publications are intended to facilitate the review and utilization of the results of the project. They are also providing assistance in further refinement and/or extension of plant specific safety evaluation of model 213 NPPs. This Technical Document addressing the design basis and safety related design features of WWER-440 model 213 plants is the first of the series to be published. It is hoped that this document will be useful to anyone working in the field of WWER safety, and in particular to experts planning, executing or reviewing studies related to the subject. Refs, 36 figs, tabs

Compliance with recommended care at trauma centers: association with patient outcomes.

Science.gov (United States)

Shafi, Shahid; Barnes, Sunni A; Rayan, Nadine; Kudyakov, Rustam; Foreman, Michael; Cryer, H Gil; Alam, Hasan B; Hoff, William; Holcomb, John

2014-08-01

State health departments and the American College of Surgeons focus on the availability of optimal resources to designate hospitals as trauma centers, with little emphasis on actual delivery of care. There is no systematic information on clinical practices at designated trauma centers. The objective of this study was to measure compliance with 22 commonly recommended clinical practices at trauma centers and its association with in-hospital mortality. This retrospective observational study was conducted at 5 Level I trauma centers across the country. Participants were adult patients with moderate to severe injuries (n = 3,867). The association between compliance with 22 commonly recommended clinical practices and in-hospital mortality was measured after adjusting for patient demographics and injuries and their severity. Compliance with individual clinical practices ranged from as low as 12% to as high as 94%. After adjusting for patient demographics and injury severity, each 10% increase in compliance with recommended care was associated with a 14% reduction in the risk of death. Patients who received all recommended care were 58% less likely to die (odds ratio = 0.42; 95% CI, 0.28-0.62) compared with those who did not. Compliance with commonly recommended clinical practices remains suboptimal at designated trauma centers. Improved adoption of these practices can reduce mortality. Copyright © 2014 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

Towards the automation of forensic facial individualisation: Comparing forensic to non forensic eyebrow features

NARCIS (Netherlands)

Zeinstra, Christopher Gerard; Veldhuis, Raymond N.J.; Spreeuwers, Lieuwe Jan

2014-01-01

The Facial Identification Scientific Working Group (FISWG) publishes recommendations regarding one-to-one facial comparisons. At this moment a draft version of a facial image comparison feature list for morphological analysis has been published. This feature list is based on casework experience by

Mining and representing recommendations in actively evolving recommender systems

DEFF Research Database (Denmark)

Assent, Ira

2010-01-01

Recommender systems provide an automatic means of filtering out interesting items, usually based on past similarity of user ratings. In previous work, we have suggested a model that allows users to actively build a recommender network. Users express trust, obtain transparency, and grow (anonymous......) recommender connections. In this work, we propose mining such active systems to generate easily understandable representations of the recommender network. Users may review these representations to provide active feedback. This approach further enhances the quality of recommendations, especially as topics...... of interest change over time. Most notably, it extends the amount of control users have over the model that the recommender network builds of their interests....

The Design Features of the Double-Banked AMBIDEXTER Utilizing DUPIC Fuel

Energy Technology Data Exchange (ETDEWEB)

Ham, Tae Kyu [KHNP Central Research Institute, Daejeon (Korea, Republic of); Lee, Young Joon; Hong, Sung Taek [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Seo, Myung Hwan [Korea Radioactive Waste Agency, Daejeon (Korea, Republic of); Kwon, Tae An [KHNP, Daejeon (Korea, Republic of); Oh, Se Kee [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

2016-10-15

Since the on-site spent fuel storage capabilities at reactors in Korea are expected to be saturated in a few years, the government has been pressed to find a solution for the spent nuclear fuel. So far one of workable means for reducing the load would be utilizing DUPIC fuel cycle technology. The technology was developed through Korea-Canada-U.S. collaboration to utilize the LWR spent fuel for the CANDU reactor. However, by various sociopolitical reasons, the DUPIC technology has not been yet commercialized. As the other alternatives to use the DUPIC technology, Gen-IV reactors would be pertinent. In the following session, the design features of a molten salt reactor system that can burn DUPIC fuel are explained. The followings are derived as conclusions after considering all the factors; The AMDEC, compared to ORIGEN2 simulations, can calculate the nuclides concentration changes within 1% deviation in various core zones and reactor system components by using different library sets which are weighted with each neutron spectrum; Fuel-flow effects coupled with nuclear reactions is well reflected in the AMDEC.

Fabrication of small mock-ups reflecting the design features of the ITER semi-prototype

International Nuclear Information System (INIS)

Jung, Yang-Il; Choi, Byoung-Kwon; Park, Jeong-Yong; Kim, Suk-Kwon; Lee, Dong Won; Kim, Byoung Yoon

2012-01-01

The ITER semi-prototype was designed to qualify the manufacturing technology for the ITER blanket first wall. However, its fabrication is expected to face great difficulty due to a design complexity. Even though joining technology for different materials such as beryllium, CuCrZr, and stainless steel (SS) was developed during the first stage of qualification, the joining is still a key issue for the fabrication of the semi-prototype. In this study, small mock-ups (SMU) were fabricated to realize and verify the manufacturing of the semi-prototype reflecting the described design features. The joining of multiple beryllium tiles on the angled CuCrZr surface was confirmed with SMU no. 1. Six beryllium tiles were joined using hot isostatic pressing (HIP), and slitting was then performed to form multiple tiles. In SMU no. 2, HIP was performed two times in order to facilitate the cooling channels at the CuCrZr/SS interface, and to join the beryllium tiles on CuCrZr/SS. The method used to form a pressure boundary for the complex cooling channels was also developed by fabricating the SMU no. 3. The SMUs confirmed the applicability of the HIP for the manufacturing of the semi-prototype.

A Probability-Based Hybrid User Model for Recommendation System

Directory of Open Access Journals (Sweden)

Jia Hao

2016-01-01

Full Text Available With the rapid development of information communication technology, the available information or knowledge is exponentially increased, and this causes the well-known information overload phenomenon. This problem is more serious in product design corporations because over half of the valuable design time is consumed in knowledge acquisition, which highly extends the design cycle and weakens the competitiveness. Therefore, the recommender systems become very important in the domain of product domain. This research presents a probability-based hybrid user model, which is a combination of collaborative filtering and content-based filtering. This hybrid model utilizes user ratings and item topics or classes, which are available in the domain of product design, to predict the knowledge requirement. The comprehensive analysis of the experimental results shows that the proposed method gains better performance in most of the parameter settings. This work contributes a probability-based method to the community for implement recommender system when only user ratings and item topics are available.

Design features impacting mobile phone upgrading frequency

NARCIS (Netherlands)

Saaksjarvi, M.C.; Hellen, K.; Tuunanen, T.

2014-01-01

This study examines the impact of design on customer upgrading frequency, and differentiates between functional and aesthetic aspects of design. For the empirical study, we conducted an intercept survey in Beijing and Shanghai with Chinese consumers (n=170) in a retail mall setting. The survey’s

Useful and usable alarm systems : recommended properties

International Nuclear Information System (INIS)

Veland, Oeystein; Kaarstad, Magnhild; Seim, Lars Aage; Foerdestroemmen, Nils T.

2001-01-01

This document describes the result of a study on alarm systems conducted by IFE in Halden. The study was initiated by the Norwegian Petroleum Directorate. The objective was to identify and formulate a set of important properties for useful and usable alarm systems. The study is mainly based on review of the latest international recognised guidelines and standards on alarm systems available at the time of writing, with focus on realistic solutions from research and best practice from different industries. In addition, IFE experiences gathered through specification and design of alarm systems and experimental activities in HAMMLAB and bilateral projects, have been utilized where relevant. The document presents a total of 43 recommendations divided into a number of general recommendations and more detailed recommendations on alarm generation, structuring, prioritisation, presentation and handling. (Author)

Recommendations for cask features for robotic handling from the Advanced Handling Technology Project

International Nuclear Information System (INIS)

Drotning, W.

1991-02-01

This report describes the current status and recent progress in the Advanced Handling Technology Project (AHTP) initiated to explore the use of advanced robotic systems and handling technologies to perform automated cask handling operations at radioactive waste handling facilities, and to provide guidance to cask designers on the impact of robotic handling on cask design. Current AHTP tasks have developed system mock-ups to investigate robotic manipulation of impact limiters and cask tiedowns. In addition, cask uprighting and transport, using computer control of a bridge crane and robot, were performed to demonstrate the high speed cask transport operation possible under computer control. All of the current AHTP tasks involving manipulation of impact limiters and tiedowns require robotic operations using a torque wrench. To perform these operations, a pneumatic torque wrench and control system were integrated into the tool suite and control architecture of the gantry robot. The use of captured fasteners is briefly discussed as an area where alternative cask design preferences have resulted from the influence of guidance for robotic handling vs traditional operations experience. Specific robotic handling experiences with these system mock-ups highlight a number of continually recurring design principles: (1) robotic handling feasibility is improved by mechanical designs which emphasize operation with limited dexterity in constrained workspaces; (2) clearances, tolerances, and chamfers must allow for operations under actual conditions with consideration for misalignment and imprecise fixturing; (3) successful robotic handling is enhanced by including design detail in representations for model-based control; (4) robotic handling and overall quality assurance are improved by designs which eliminate the use of loose, disassembled parts. 8 refs., 15 figs

EULAR evidence-based recommendations for the management of fibromyalgia syndrome

DEFF Research Database (Denmark)

Carville, S.F.; Arendt-Nielsen, S.; Bliddal, H.

2008-01-01

Objective: To develop evidence-based recommendations for the management of fibromyalgia syndrome. Methods: A multidisciplinary task force was formed representing 11 European countries. The design of the study, including search strategy, participants, interventions, outcome measures, data collection...... quality studies were used to base recommendations on. When there was insufficient evidence from the literature, a Delphi process was used to provide basis for recommendation. Results: 146 studies were eligible for the review. 39 pharmacological intervention studies and 59 non-pharmacological were included......-pharmacological''. In many studies sample size was small and the quality of the study was insufficient for strong recommendations to be made. Conclusions: Nine recommendations for the management of fibromyalgia syndrome were developed using a systematic review and expert consensus Udgivelsesdato: 2008/4...

Testing Map Features Designed to Convey the Uncertainty of Cancer Risk: Insights Gained From Assessing Judgments of Information Adequacy and Communication Goals.

Science.gov (United States)

Severtson, Dolores J

2015-02-01

Barriers to communicating the uncertainty of environmental health risks include preferences for certain information and low numeracy. Map features designed to communicate the magnitude and uncertainty of estimated cancer risk from air pollution were tested among 826 participants to assess how map features influenced judgments of adequacy and the intended communication goals. An uncertain versus certain visual feature was judged as less adequate but met both communication goals and addressed numeracy barriers. Expressing relative risk using words communicated uncertainty and addressed numeracy barriers but was judged as highly inadequate. Risk communication and visual cognition concepts were applied to explain findings.

Innovation in Deep Space Habitat Interior Design: Lessons Learned From Small Space Design in Terrestrial Architecture

Science.gov (United States)

Simon, Matthew A.; Toups, Larry

2014-01-01

Increased public awareness of carbon footprints, crowding in urban areas, and rising housing costs have spawned a 'small house movement' in the housing industry. Members of this movement desire small, yet highly functional residences which are both affordable and sensitive to consumer comfort standards. In order to create comfortable, minimum-volume interiors, recent advances have been made in furniture design and approaches to interior layout that improve both space utilization and encourage multi-functional design for small homes, apartments, naval, and recreational vehicles. Design efforts in this evolving niche of terrestrial architecture can provide useful insights leading to innovation and efficiency in the design of space habitats for future human space exploration missions. This paper highlights many of the cross-cutting architectural solutions used in small space design which are applicable to the spacecraft interior design problem. Specific solutions discussed include reconfigurable, multi-purpose spaces; collapsible or transformable furniture; multi-purpose accommodations; efficient, space saving appliances; stowable and mobile workstations; and the miniaturization of electronics and computing hardware. For each of these design features, descriptions of how they save interior volume or mitigate other small space issues such as confinement stress or crowding are discussed. Finally, recommendations are provided to provide guidance for future designs and identify potential collaborations with the small spaces design community.

Peer-Based Social Media Features in Behavior Change Interventions: Systematic Review.

Science.gov (United States)

Elaheebocus, Sheik Mohammad Roushdat Ally; Weal, Mark; Morrison, Leanne; Yardley, Lucy

2018-02-22

Incorporating social media features into digital behavior change interventions (DBCIs) has the potential to contribute positively to their success. However, the lack of clear design principles to describe and guide the use of these features in behavioral interventions limits cross-study comparisons of their uses and effects. The aim of this study was to provide a systematic review of DBCIs targeting modifiable behavioral risk factors that have included social media features as part of their intervention infrastructure. A taxonomy of social media features is presented to inform the development, description, and evaluation of behavioral interventions. Search terms were used in 8 databases to identify DBCIs that incorporated social media features and targeted tobacco smoking, diet and nutrition, physical activities, or alcohol consumption. The screening and review process was performed by 2 independent researchers. A total of 5264 articles were screened, and 143 articles describing a total of 134 studies were retained for full review. The majority of studies (70%) reported positive outcomes, followed by 28% finding no effects with regard to their respective objectives and hypothesis, and 2% of the studies found that their interventions had negative outcomes. Few studies reported on the association between the inclusion of social media features and intervention effect. A taxonomy of social media features used in behavioral interventions has been presented with 36 social media features organized under 7 high-level categories. The taxonomy has been used to guide the analysis of this review. Although social media features are commonly included in DBCIs, there is an acute lack of information with respect to their effect on outcomes and a lack of clear guidance to inform the selection process based on the features' suitability for the different behaviors. The proposed taxonomy along with the set of recommendations included in this review will support future research aimed

Features of the Manufacturing Vision Development Process

DEFF Research Database (Denmark)

Dukovska-Popovska, Iskra; Riis, Jens Ove; Boer, Harry

2005-01-01

of action research. The methodology recommends wide participation of people from different hierarchical and functional positions, who engage in a relatively short, playful and creative process and come up with a vision (concept) for the future manufacturing system in the company. Based on three case studies......This paper discusses the key features of the process of Manufacturing Vision Development, a process that enables companies to develop their future manufacturing concept. The basis for the process is a generic five-phase methodology (Riis and Johansen, 2003) developed as a result of ten years...... of companies going through the initial phases of the methodology, this research identified the key features of the Manufacturing Vision Development process. The paper elaborates the key features by defining them, discussing how and when they can appear, and how they influence the process....

Design and control of a hybrid mount featuring a magnetorheological fluid and a piezostack

International Nuclear Information System (INIS)

Han, Young-Min; Choi, Sang-Min; Choi, Seung-Bok; Lee, Ho-Guen

2011-01-01

In this study, a hybrid mount featuring a magnetorheological (MR) fluid and a piezostack is devised to reduce vibrations occuring in dynamic systems which are operated in a wide frequency range. An MR fluid is adopted to improve isolation performance at resonant low frequencies, whereas a piezostack actuator is adopted for performance improvement at non-resonant high frequencies. As a first step, a passive rubber part is manufactured and its dynamic characteristics are experimentally evaluated. By adopting the MR fluid and the piezostack, semi-active and active actuating mechanisms are devised and their mathematical models are derived. In particular, the magnetic circuit for MR operation is optimally designed via finite element analysis. After evaluating the dynamic characteristics of the manufactured MR device and inertial piezostack actuator, the proposed hybrid mount is then established by integrating them with the rubber part. Subsequently, a vibration control system is constructed using the proposed hybrid mount, and a sliding mode controller (SMC) is designed to attenuate the vibrations transmitted from the base excitation. Control performances of the proposed mount are experimentally evaluated in time and frequency domains

May I suggest? Three PLE recommender strategies in comparison

OpenAIRE

Mödritscher, Felix; Krumay, Barbara; El Helou, Sandy; Gillet, Denis; Nussbaumer, Alexander; Albert, Dietrich; Dahn, Ingo; Ullrich, Carsten

2011-01-01

Personal learning environment (PLE) solutions aim at empowering learners to design (ICT and web-based) environments for their activities in different learning contexts and even for transitions between these contexts. Hereby, recommender systems which are highly successful in other application areas comprise one relevant technology for supporting learners in PLE-based activities. In this paper we examine the utilization of recommender technology for PLEs. However, being confronted by a variety...

DeepSurv: personalized treatment recommender system using a Cox proportional hazards deep neural network.

Science.gov (United States)

Katzman, Jared L; Shaham, Uri; Cloninger, Alexander; Bates, Jonathan; Jiang, Tingting; Kluger, Yuval

2018-02-26

Medical practitioners use survival models to explore and understand the relationships between patients' covariates (e.g. clinical and genetic features) and the effectiveness of various treatment options. Standard survival models like the linear Cox proportional hazards model require extensive feature engineering or prior medical knowledge to model treatment interaction at an individual level. While nonlinear survival methods, such as neural networks and survival forests, can inherently model these high-level interaction terms, they have yet to be shown as effective treatment recommender systems. We introduce DeepSurv, a Cox proportional hazards deep neural network and state-of-the-art survival method for modeling interactions between a patient's covariates and treatment effectiveness in order to provide personalized treatment recommendations. We perform a number of experiments training DeepSurv on simulated and real survival data. We demonstrate that DeepSurv performs as well as or better than other state-of-the-art survival models and validate that DeepSurv successfully models increasingly complex relationships between a patient's covariates and their risk of failure. We then show how DeepSurv models the relationship between a patient's features and effectiveness of different treatment options to show how DeepSurv can be used to provide individual treatment recommendations. Finally, we train DeepSurv on real clinical studies to demonstrate how it's personalized treatment recommendations would increase the survival time of a set of patients. The predictive and modeling capabilities of DeepSurv will enable medical researchers to use deep neural networks as a tool in their exploration, understanding, and prediction of the effects of a patient's characteristics on their risk of failure.

Text feature extraction based on deep learning: a review.

Science.gov (United States)

Liang, Hong; Sun, Xiao; Sun, Yunlei; Gao, Yuan

2017-01-01

Selection of text feature item is a basic and important matter for text mining and information retrieval. Traditional methods of feature extraction require handcrafted features. To hand-design, an effective feature is a lengthy process, but aiming at new applications, deep learning enables to acquire new effective feature representation from training data. As a new feature extraction method, deep learning has made achievements in text mining. The major difference between deep learning and conventional methods is that deep learning automatically learns features from big data, instead of adopting handcrafted features, which mainly depends on priori knowledge of designers and is highly impossible to take the advantage of big data. Deep learning can automatically learn feature representation from big data, including millions of parameters. This thesis outlines the common methods used in text feature extraction first, and then expands frequently used deep learning methods in text feature extraction and its applications, and forecasts the application of deep learning in feature extraction.

WASTE PACKAGE TRANSPORTER DESIGN

Energy Technology Data Exchange (ETDEWEB)

D.C. Weddle; R. Novotny; J. Cron

1998-09-23

The purpose of this Design Analysis is to develop preliminary design of the waste package transporter used for waste package (WP) transport and related functions in the subsurface repository. This analysis refines the conceptual design that was started in Phase I of the Viability Assessment. This analysis supports the development of a reliable emplacement concept and a retrieval concept for license application design. The scope of this analysis includes the following activities: (1) Assess features of the transporter design and evaluate alternative design solutions for mechanical components. (2) Develop mechanical equipment details for the transporter. (3) Prepare a preliminary structural evaluation for the transporter. (4) Identify and recommend the equipment design for waste package transport and related functions. (5) Investigate transport equipment interface tolerances. This analysis supports the development of the waste package transporter for the transport, emplacement, and retrieval of packaged radioactive waste forms in the subsurface repository. Once the waste containers are closed and accepted, the packaged radioactive waste forms are termed waste packages (WP). This terminology was finalized as this analysis neared completion; therefore, the term disposal container is used in several references (i.e., the System Description Document (SDD)) (Ref. 5.6). In this analysis and the applicable reference documents, the term ''disposal container'' is synonymous with ''waste package''.

Italian Society for Rheumatology recommendations for the management of hand osteoarthritis

Directory of Open Access Journals (Sweden)

M. Manara

2013-10-01

Full Text Available Hand osteoarthritis (OA is a common and potentially disabling disease, with different features from hip and knee OA so that a specific therapeutic approach is required. Evidence based recommendations for the management of hand OA were developed by the European League Against Rheumatism (EULAR in 2006. The Italian Society for Rheumatology (SIR aimed to update, adapt to national contest and disseminate the EULAR recommendations for the management of hand OA. The multidisciplinary group of experts included specialists involved in the management of patients with hand OA. In order to maintain consistency with EULAR recommendations, a similar methodology was utilized by the Italian group. The original propositions were reformulated in terms of a search query and for every recommendation a systematic search was conducted updating EULAR recommendations’ review. The propositions were translated in Italian and reformulated basing on collected evidences and expert opinion. The strength of recommendation was measured for each proposition with the EULAR ordinal and visual analogue scales. The original 11 propositions of EULAR recommendations were translated and adapted to Italian context. Further evidences were collected about non-pharmacological therapies, local treatments, intra-articular injection with SYSADOA and corticosteroids, and surgery. The SIR has developed updated recommendations for the management of hand OA adapted to the Italian healthcare system. Their implementation in clinical practice is expected to improve the management of patients with hand OA.

Personalized recommendation based on preferential bidirectional mass diffusion

Science.gov (United States)

Chen, Guilin; Gao, Tianrun; Zhu, Xuzhen; Tian, Hui; Yang, Zhao

2017-03-01

Recommendation system provides a promising way to alleviate the dilemma of information overload. In physical dynamics, mass diffusion has been used to design effective recommendation algorithms on bipartite network. However, most of the previous studies focus overwhelmingly on unidirectional mass diffusion from collected objects to uncollected objects, while overlooking the opposite direction, leading to the risk of similarity estimation deviation and performance degradation. In addition, they are biased towards recommending popular objects which will not necessarily promote the accuracy but make the recommendation lack diversity and novelty that indeed contribute to the vitality of the system. To overcome the aforementioned disadvantages, we propose a preferential bidirectional mass diffusion (PBMD) algorithm by penalizing the weight of popular objects in bidirectional diffusion. Experiments are evaluated on three benchmark datasets (Movielens, Netflix and Amazon) by 10-fold cross validation, and results indicate that PBMD remarkably outperforms the mainstream methods in accuracy, diversity and novelty.

A Recommendation System to Facilitate Business Process Modeling.

Science.gov (United States)

Deng, Shuiguang; Wang, Dongjing; Li, Ying; Cao, Bin; Yin, Jianwei; Wu, Zhaohui; Zhou, Mengchu

2017-06-01

This paper presents a system that utilizes process recommendation technology to help design new business processes from scratch in an efficient and accurate way. The proposed system consists of two phases: 1) offline mining and 2) online recommendation. At the first phase, it mines relations among activity nodes from existing processes in repository, and then stores the extracted relations as patterns in a database. At the second phase, it compares the new process under construction with the premined patterns, and recommends proper activity nodes of the most matching patterns to help build a new process. Specifically, there are three different online recommendation strategies in this system. Experiments on both real and synthetic datasets are conducted to compare the proposed approaches with the other state-of-the-art ones, and the results show that the proposed approaches outperform them in terms of accuracy and efficiency.

Seismic design criteria for nuclear powerplants

International Nuclear Information System (INIS)

Jennings, P.C.; Guzman, R.A.

1975-01-01

There are three main aspects of the problem of selection of seismic design criteria for major projects such as nuclear power plants. These are the description of the appropriate level of shaking to be considered, usually given in the form of design spectra; the allowable response of the structure, usually specified in terms of allowable stresses and deflections; and the capability of the structure to dissipate energy, commonly given in the form of fractions of critical damping. In this presentation only the first of these features is examined, with particular application to nuclear power plants. Under these restrictions, the most important parts of the problem become the determination of the amplitude of the design spectra corresponding to the safe shutdown earthquake (SSE) and the question of whether the shape of the spectra recommended by Regulatory Guide 1.60 (U. S. Atomic Energy Commission, 1973) is appropriate for the particular application. In the course of working out the details of the approach, it was found useful to reexamine a number of concepts including the use of response spectra or peak values of ground motion parameters, the shape of the design spectra, problems in attenuation and scaling, and the use of motions on the ground surface or bedrock motions. There is nothing fundamentally new in the suggested approach, although some of the features may not have been applied to the problem of selecting design spectra for nuclear power plants in the way suggested. The approach is applied only to nuclear power plants but it is not limited to this application

Optical design considerations for laser fusion reactors

International Nuclear Information System (INIS)

Monsler, M.J.; Maniscalco, J.A.

1977-09-01

The plan for the development of commercial inertial confinement fusion (ICF) power plants is discussed, emphasizing the utilization of the unique features of laser fusion to arrive at conceptual designs for reactors and optical systems which minimize the need for advanced materials and techniques requiring expensive test facilities. A conceptual design for a liquid lithium fall reactor is described which successfully deals with the hostile x-ray and neutron environment and promises to last the 30 year plant lifetime. Schemes for protecting the final focusing optics are described which are both compatible with this reactor system and show promise of surviving a full year in order to minimize costly downtime. Damage mechanisms and protection techniques are discussed, and a recommendation is made for a high f-number metal mirror final focusing system

Extracorporeal treatment for thallium poisoning: recommendations from the EXTRIP Workgroup.

Science.gov (United States)

Ghannoum, Marc; Nolin, Thomas D; Goldfarb, David S; Roberts, Darren M; Mactier, Robert; Mowry, James B; Dargan, Paul I; Maclaren, Robert; Hoegberg, Lotte C; Laliberté, Martin; Calello, Diane; Kielstein, Jan T; Anseeuw, Kurt; Winchester, James F; Burdmann, Emmanuel A; Bunchman, Timothy E; Li, Yi; Juurlink, David N; Lavergne, Valery; Megarbane, Bruno; Gosselin, Sophie; Liu, Kathleen D; Hoffman, Robert S

2012-10-01

The EXtracorporeal TReatments In Poisoning (EXTRIP) workgroup was formed to provide recommendations on the use of extracorporeal treatment (ECTR) in poisoning. To test and validate its methods, the workgroup reviewed data for thallium (Tl). After an extensive search, the co-chairs reviewed the articles, extracted the data, summarized findings, and proposed structured voting statements following a predetermined format. A two-round modified Delphi method was chosen to reach a consensus on voting statements and RAND/UCLA Appropriateness Method to quantify disagreement. Blinded votes were compiled, returned, and discussed during a conference call. A second vote determined the final recommendations. Forty-five articles met inclusion criteria. Only case reports and case series were identified, yielding a very low quality of evidence for all recommendations. Data on 74 patients, including 11 who died, were abstracted. The workgroup concluded that Tl is slightly dialyzable and made the following recommendations: ECTR is recommended in severe Tl poisoning (1D). ECTR is indicated if Tl exposure is highly suspected on the basis of history or clinical features (2D) or if the serum Tl concentration is >1.0 mg/L (2D). ECTR should be initiated as soon as possible, ideally within 24-48 hours of Tl exposure (1D), and be continued until the serum Tl concentration is poisoning.

Collaborative Filtering Fusing Label Features Based on SDAE

DEFF Research Database (Denmark)

Huo, Huan; Liu, Xiufeng; Zheng, Deyuan

2017-01-01

problem, auxiliary information such as labels are utilized. Another approach of recommendation system is content-based model which can’t be directly integrated with CF-based model due to its inherent characteristics. Considering that deep learning algorithms are capable of extracting deep latent features......, this paper applies Stack Denoising Auto Encoder (SDAE) to content-based model and proposes LCF(Deep Learning for Collaborative Filtering) algorithm by combing CF-based model which fuses label features. Experiments on real-world data sets show that DLCF can largely overcome the sparsity problem...... and significantly improves the state of art approaches....

Impact of severe accidents on the European pressurized water reactor (ERP) design and layout

International Nuclear Information System (INIS)

Yvon, M.; Lohnert, G.; Lauret, P.; Bittermann, D.

1998-01-01

The purpose of this presentation is to describe the impact of severe accidents on the EPR design and layout. After a summary of the safety requirements specified in accordance with the recommendations expressed by the French and German safety authorities, the main EPR features corresponding to the prevention and the mitigation of severe accidents will be described. Considerations with regard to R and D and cost impacts are also provided