A new Java Thread model for concurrent programming of real-time systems

NARCIS (Netherlands)

Hilderink, G.H.; Broenink, Johannes F.; Bakkers, André

1998-01-01

The Java ™ Virtual Machine (JVM) provides a high degree of platform independence, but being an interpreter, Java has a poor system performance. New compiler techniques and Java processors will gradually improve the performance of Java, but despite these developments, Java is still far from

Hardware Support for Embedded Java

DEFF Research Database (Denmark)

Schoeberl, Martin

2012-01-01

The general Java runtime environment is resource hungry and unfriendly for real-time systems. To reduce the resource consumption of Java in embedded systems, direct hardware support of the language is a valuable option. Furthermore, an implementation of the Java virtual machine in hardware enables...... worst-case execution time analysis of Java programs. This chapter gives an overview of current approaches to hardware support for embedded and real-time Java....

A real-time Java tool chain for resource constrained platforms

DEFF Research Database (Denmark)

Korsholm, Stephan Erbs; Søndergaard, Hans; Ravn, Anders P.

2013-01-01

The Java programming language was originally developed for embedded systems, but the resource requirements of previous and current Java implementations - especially memory consumption - tend to exclude them from being used on a significant class of resource constrained embedded platforms. The con......The Java programming language was originally developed for embedded systems, but the resource requirements of previous and current Java implementations - especially memory consumption - tend to exclude them from being used on a significant class of resource constrained embedded platforms...... by integrating: (1) a lean virtual machine (HVM) without any external dependencies on POSIX-like libraries or other OS functionalities, (2) a hardware abstraction layer, implemented almost entirely in Java through the use of hardware objects, first level interrupt handlers, and native variables, and (3....... An evaluation of the presented solution shows that the miniCDj benchmark gets reduced to a size where it can run on resource constrained platforms....

A real-time Java tool chain for resource constrained platforms

DEFF Research Database (Denmark)

Korsholm, Stephan E.; Søndergaard, Hans; Ravn, Anders Peter

2014-01-01

The Java programming language was originally developed for embedded systems, but the resource requirements of previous and current Java implementations – especially memory consumption – tend to exclude them from being used on a significant class of resource constrained embedded platforms. The con......The Java programming language was originally developed for embedded systems, but the resource requirements of previous and current Java implementations – especially memory consumption – tend to exclude them from being used on a significant class of resource constrained embedded platforms...... by integrating the following: (1) a lean virtual machine without any external dependencies on POSIX-like libraries or other OS functionalities; (2) a hardware abstraction layer, implemented almost entirely in Java through the use of hardware objects, first level interrupt handlers, and native variables; and (3....... An evaluation of the presented solution shows that the miniCDj benchmark gets reduced to a size where it can run on resource constrained platforms....

Java Processor Optimized for RTSJ

Directory of Open Access Journals (Sweden)

Tu Shiliang

2007-01-01

Full Text Available Due to the preeminent work of the real-time specification for Java (RTSJ, Java is increasingly expected to become the leading programming language in real-time systems. To provide a Java platform suitable for real-time applications, a Java processor which can execute Java bytecode is directly proposed in this paper. It provides efficient support in hardware for some mechanisms specified in the RTSJ and offers a simpler programming model through ameliorating the scoped memory of the RTSJ. The worst case execution time (WCET of the bytecodes implemented in this processor is predictable by employing the optimization method proposed in our previous work, in which all the processing interfering predictability is handled before bytecode execution. Further advantage of this method is to make the implementation of the processor simpler and suited to a low-cost FPGA chip.

Java for Cost Effective Embedded Real-Time Software

DEFF Research Database (Denmark)

Korsholm, Stephan Erbs

2012-01-01

This thesis presents the analysis, design and implementation of the Hardware near Virtual Machine (HVM) - a Java virtual machine for embedded devices. The HVM supports the execution of Java programs on low-end embedded hard- ware environments with as little as a few kB of RAM and 32 kB of ROM....... The HVM is based on a Java-to-C translation mechanism and it produces selfcontained, strict ANSI-C code that has been specially crafted to allow it to be embedded into existing C based build and execution environments; environ- ments which may be based on non standard C compilers and libraries. The HVM...... does not require a POSIX-like OS, nor does it require a C runtime library to be present for the target. The main distinguishing feature of the HVM is to support the stepwise addition of Java into an existing C based build and execution environment for low-end embedded systems. This will allow...

Java for Cost Effective Embedded Real-Time Software

DEFF Research Database (Denmark)

Korsholm, Stephan

This thesis presents the analysis, design and implementation of the Hardware near Virtual Machine (HVM) - a Java virtual machine for embedded devices. The HVM supports the execution of Java programs on low-end embedded hard- ware environments with as little as a few kB of RAM and 32 kB of ROM....... The HVM is based on a Java-to-C translation mechanism and it produces self- contained, strict ANSI-C code that has been specially crafted to allow it to be embedded into existing C based build and execution environments; environ- ments which may be based on non standard C compilers and libraries. The HVM...... does not require a POSIX-like OS, nor does it require a C runtime library to be present for the target. The main distinguishing feature of the HVM is to support the stepwise addition of Java into an existing C based build and execution environment for low-end embedded systems. This will allow...

Measuring the Effects of Virtual Pair Programming in an Introductory Programming Java Course

Science.gov (United States)

Zacharis, N. Z.

2011-01-01

This study investigated the effectiveness of virtual pair programming (VPP) on student performance and satisfaction in an introductory Java course. Students used online tools that integrated desktop sharing and real-time communication, and the metrics examined showed that VPP is an acceptable alternative to individual programming experience.…

Beginning Programming with Java For Dummies

CERN Document Server

Burd, Barry

2012-01-01

One of the most popular beginning programming books, now fully updated Java is a popular language for beginning programmers, and earlier editions of this fun and friendly guide have helped thousands get started. Now fully revised to cover recent updates for Java 7.0, Beginning Programming with Java For Dummies, 3rd Edition is certain to put more first-time programmers and Java beginners on the road to Java mastery.Explores what goes into creating a program, putting the pieces together, dealing with standard programming challenges, debugging, and making the program work Offers new options for

A Ravenscar-Java profile implementation

DEFF Research Database (Denmark)

Thomsen, Bent; Ravn, Anders Peter; Søndergaard, Hans

2006-01-01

This paper presents an implementation of the Ravenscar-Java profile. While most implementations of the profile are reference-implementations showing that it is possible to implement the profile, our implementation is aimed at industrial applications. It uses a dedicated real-time Java processor......, since we want to investigate if the Ravenscar-Java profile, implemented on a Java processor, is efficient for real applications. During the implementation some ambiguities and weaknesses of the profile were uncovered. However, test examples indicate that the profile is suitable for development...... of realistic real-time programs....

Checking Java Programs

CERN Document Server

Darwin, Ian

2007-01-01

This Short Cut tells you about tools that will improve the quality of your Java code, using checking above and beyond what the standard tools do, including: Using javac options, JUnit and assertions Making your IDE work harder Checking your source code with PMD Checking your compiled code (.class files) with FindBugs Checking your program's run-time behavior with Java PathFinder

Java programming fundamentals problem solving through object oriented analysis and design

CERN Document Server

Nair, Premchand S

2008-01-01

While Java texts are plentiful, it's difficult to find one that takes a real-world approach, and encourages novice programmers to build on their Java skills through practical exercise. Written by an expert with 19 experience teaching computer programming, Java Programming Fundamentals presents object-oriented programming by employing examples taken from everyday life. Provides a foundation in object-oriented design principles and UML notation Describes common pitfalls and good programming practicesFurnishes supplemental links, documents, and programs on its companion website, www.premnair.netU

Schedulability Analysis for Java Finalizers

DEFF Research Database (Denmark)

Bøgholm, Thomas; Hansen, Rene Rydhof; Søndergaard, Hans

2010-01-01

Java finalizers perform clean-up and finalisation of objects at garbage collection time. In real-time Java profiles the use of finalizers is either discouraged (RTSJ, Ravenscar Java) or even disallowed (JSR-302), mainly because of the unpredictability of finalizers and in particular their impact...... on the schedulability analysis. In this paper we show that a controlled scoped memory model results in a structured and predictable execution of finalizers, more reminiscent of C++ destructors than Java finalizers. Furthermore, we incorporate finalizers into a (conservative) schedulability analysis for Predictable Java...... programs. Finally, we extend the SARTS tool for automated schedulability analysis of Java bytecode programs to handle finalizers in a fully automated way....

Java servlet programming

CERN Document Server

Hunter, Jason

2001-01-01

Servlets are an exciting and important technology that ties Java to the Web, allowing programmers to write Java programs that create dynamic web content. Java Servlet Programming covers everything Java developers need to know to write effective servlets. It explains the servlet lifecycle, showing how to use servlets to maintain state information effortlessly. It also describes how to serve dynamic web content, including both HTML pages and multimedia data, and explores more advanced topics like integrated session tracking, efficient database connectivity using JDBC, applet-servlet communicat

Memory Management for Safety-Critical Java

DEFF Research Database (Denmark)

Schoeberl, Martin

2011-01-01

Safety-Critical Java (SCJ) is based on the Real-Time Specification for Java. To simplify the certification of Java programs, SCJ supports only a restricted scoped memory model. Individual threads share only immortal memory and the newly introduced mission memory. All other scoped memories...... implementation is evaluated on an embedded Java processor....

A Profile for Safety Critical Java

DEFF Research Database (Denmark)

Schoeberl, Martin; Søndergaard, Hans; Thomsen, Bent

2007-01-01

We propose a new, minimal specification for real-time Java for safety critical applications. The intention is to provide a profile that supports programming of applications that can be validated against safety critical standards such as DO-178B [15]. The proposed profile is in line with the Java...... specification request JSR-302: Safety Critical Java Technology, which is still under discussion. In contrast to the current direction of the expert group for the JSR-302 we do not subset the rather complex Real-Time Specification for Java (RTSJ). Nevertheless, our profile can be implemented on top of an RTSJ...

Java Programming Language

Science.gov (United States)

Shaykhian, Gholam Ali

2007-01-01

The Java seminar covers the fundamentals of Java programming language. No prior programming experience is required for participation in the seminar. The first part of the seminar covers introductory concepts in Java programming including data types (integer, character, ..), operators, functions and constants, casts, input, output, control flow, scope, conditional statements, and arrays. Furthermore, introduction to Object-Oriented programming in Java, relationships between classes, using packages, constructors, private data and methods, final instance fields, static fields and methods, and overloading are explained. The second part of the seminar covers extending classes, inheritance hierarchies, polymorphism, dynamic binding, abstract classes, protected access. The seminar conclude by introducing interfaces, properties of interfaces, interfaces and abstract classes, interfaces and cailbacks, basics of event handling, user interface components with swing, applet basics, converting applications to applets, the applet HTML tags and attributes, exceptions and debugging.

Java simulations of embedded control systems.

Science.gov (United States)

Farias, Gonzalo; Cervin, Anton; Arzén, Karl-Erik; Dormido, Sebastián; Esquembre, Francisco

2010-01-01

This paper introduces a new Open Source Java library suited for the simulation of embedded control systems. The library is based on the ideas and architecture of TrueTime, a toolbox of Matlab devoted to this topic, and allows Java programmers to simulate the performance of control processes which run in a real time environment. Such simulations can improve considerably the learning and design of multitasking real-time systems. The choice of Java increases considerably the usability of our library, because many educators program already in this language. But also because the library can be easily used by Easy Java Simulations (EJS), a popular modeling and authoring tool that is increasingly used in the field of Control Education. EJS allows instructors, students, and researchers with less programming capabilities to create advanced interactive simulations in Java. The paper describes the ideas, implementation, and sample use of the new library both for pure Java programmers and for EJS users. The JTT library and some examples are online available on http://lab.dia.uned.es/jtt.

Java programming 24-hour trainer

CERN Document Server

Fain, Yakov

2015-01-01

Quick and painless Java programming with expert multimedia instruction Java Programming 24-Hour Trainer, 2nd Edition is your complete beginner's guide to the Java programming language, with easy-to-follow lessons and supplemental exercises that help you get up and running quickly. Step-by-step instruction walks you through the basics of object-oriented programming, syntax, interfaces, and more, before building upon your skills to develop games, web apps, networks, and automations. This second edition has been updated to align with Java SE 8 and Java EE 7, and includes new information on GUI b

Scala for Real-Time Systems?

DEFF Research Database (Denmark)

Schoeberl, Martin

2015-01-01

Java served well as a general-purpose language. However, during its two decades of constant change it has gotten some weight and legacy in the language syntax and the libraries. Furthermore, Java's success for real-time systems is mediocre. Scala is a modern object-oriented and functional language...... with interesting new features. Although a new language, it executes on a Java virtual machine, reusing that technology. This paper explores Scala as language for future real-time systems....

Reusable Client-Side JavaScript Modules for Immersive Web-Based Real-Time Collaborative Neuroimage Visualization.

Science.gov (United States)

Bernal-Rusiel, Jorge L; Rannou, Nicolas; Gollub, Randy L; Pieper, Steve; Murphy, Shawn; Robertson, Richard; Grant, Patricia E; Pienaar, Rudolph

2017-01-01

In this paper we present a web-based software solution to the problem of implementing real-time collaborative neuroimage visualization. In both clinical and research settings, simple and powerful access to imaging technologies across multiple devices is becoming increasingly useful. Prior technical solutions have used a server-side rendering and push-to-client model wherein only the server has the full image dataset. We propose a rich client solution in which each client has all the data and uses the Google Drive Realtime API for state synchronization. We have developed a small set of reusable client-side object-oriented JavaScript modules that make use of the XTK toolkit, a popular open-source JavaScript library also developed by our team, for the in-browser rendering and visualization of brain image volumes. Efficient realtime communication among the remote instances is achieved by using just a small JSON object, comprising a representation of the XTK image renderers' state, as the Google Drive Realtime collaborative data model. The developed open-source JavaScript modules have already been instantiated in a web-app called MedView , a distributed collaborative neuroimage visualization application that is delivered to the users over the web without requiring the installation of any extra software or browser plugin. This responsive application allows multiple physically distant physicians or researchers to cooperate in real time to reach a diagnosis or scientific conclusion. It also serves as a proof of concept for the capabilities of the presented technological solution.

Remodularizing Java programs for comprehension of features

DEFF Research Database (Denmark)

Olszak, Andrzej; Jørgensen, Bo Nørregaard

2009-01-01

. In absence of these mechanisms, feature implementations tend to be scattered and tangled in terms of object-oriented abstractions, making the code implementing features difficult to locate and comprehend. In this paper we present a semi-automatic method for feature-oriented remodularization of Java programs....... Our method uses execution traces to locate implementations of features, and Java packages to establish explicit feature modules. To evaluate usefulness of the approach, we present a case study where we apply our method to two real-world software systems. The obtained results indicate a significant...

Módulo Distribuido de Subasta Java sobre CORBA de Tiempo Real

Directory of Open Access Journals (Sweden)

P. Basanta-Val

2012-10-01

Full Text Available Resumen: El uso de infraestructuras middleware que permitan intercomunicar diferentes nodos de un sistema puede aliviar aspectos importantes relacionados con el coste de desarrollo y mantenimiento de dichos sistemas en entornos flexibles. En este contexto el artículo presenta una arquitectura desarrollada dentro del contexto de los sistemas de subasta distribuidos que tienen ciertos requisitos de tiempo real que han de ser satisfechos. Dicha arquitectura implementa un sistema de puja doble (CDA para un sistema de tiempo real industriales. El artículo presenta tanto la arquitectura del sistema con sus diferentes actores así como una evaluación en una plataforma real utilizando middleware de tiempo real ya existente. Abstract: Using middleware infrastructures that enable communication among different nodes in a system may alleviate aspects related to management and development cost in flexible environments. In that context the article presents an auction architecture with certain real-time requirements that have to be satisfied. The architecture implements a continuous double action (CDA algorithm for a real-time middleware. The article describes the architecture (actors and goals and the results obtained by using common-off-the-shelf real-time middleware. Palabras clave: Sistema de Subasta, Informática Industrial, Middleware, Tiempo Real, RT-CORBA, Real-time Java, Keywords: Action Systems, Real-time, Middleware, Industrial informatics, RT-CORBA, Real-time Java

Reusable Client-Side JavaScript Modules for Immersive Web-Based Real-Time Collaborative Neuroimage Visualization

Directory of Open Access Journals (Sweden)

Jorge L. Bernal-Rusiel

2017-05-01

Full Text Available In this paper we present a web-based software solution to the problem of implementing real-time collaborative neuroimage visualization. In both clinical and research settings, simple and powerful access to imaging technologies across multiple devices is becoming increasingly useful. Prior technical solutions have used a server-side rendering and push-to-client model wherein only the server has the full image dataset. We propose a rich client solution in which each client has all the data and uses the Google Drive Realtime API for state synchronization. We have developed a small set of reusable client-side object-oriented JavaScript modules that make use of the XTK toolkit, a popular open-source JavaScript library also developed by our team, for the in-browser rendering and visualization of brain image volumes. Efficient realtime communication among the remote instances is achieved by using just a small JSON object, comprising a representation of the XTK image renderers' state, as the Google Drive Realtime collaborative data model. The developed open-source JavaScript modules have already been instantiated in a web-app called MedView, a distributed collaborative neuroimage visualization application that is delivered to the users over the web without requiring the installation of any extra software or browser plugin. This responsive application allows multiple physically distant physicians or researchers to cooperate in real time to reach a diagnosis or scientific conclusion. It also serves as a proof of concept for the capabilities of the presented technological solution.

Monitoring Java Programs with Java PathExplorer

Science.gov (United States)

Havelund, Klaus; Rosu, Grigore; Clancy, Daniel (Technical Monitor)

2001-01-01

We present recent work on the development Java PathExplorer (JPAX), a tool for monitoring the execution of Java programs. JPAX can be used during program testing to gain increased information about program executions, and can potentially furthermore be applied during operation to survey safety critical systems. The tool facilitates automated instrumentation of a program's late code which will then omit events to an observer during its execution. The observer checks the events against user provided high level requirement specifications, for example temporal logic formulae, and against lower level error detection procedures, for example concurrency related such as deadlock and data race algorithms. High level requirement specifications together with their underlying logics are defined in the Maude rewriting logic, and then can either be directly checked using the Maude rewriting engine, or be first translated to efficient data structures and then checked in Java.

Beginning programming with Java for dummies

CERN Document Server

Burd, Barry

2014-01-01

A practical introduction to programming with Java Beginning Programming with Java For Dummies, 4th Edition is a comprehensive guide to learning one of the most popular programming languages worldwide. This book covers basic development concepts and techniques through a Java lens. You'll learn what goes into a program, how to put the pieces together, how to deal with challenges, and how to make it work. The new Fourth Edition has been updated to align with Java 8, and includes new options for the latest tools and techniques. Java is the predominant language used to program Android and cloud app

Study on Java Programming Education

OpenAIRE

太田, 信宏

2009-01-01

The purpose of this study is to consider the content and key points for inclusion in a Java programming course for beginners. The Java programming language has a variety of functions and has the largest application field of all such languages, containing many themes that are appropriate for any such programming course. The multifunctional and wide-ranging functions of Java, however, may actually act as a barrier to study for beginners. The core content of a programming class for beginners sho...

A distributed real-time Java system based on CSP

NARCIS (Netherlands)

Bakkers, André; Hilderink, G.H.; Broenink, Johannes F.

1999-01-01

Real-time embedded systems in general require a reliability that is orders of magnitude higher than what is presently obtainable with state of the art C programs. The reason for the poor reliability of present day software is the unavailability of a formalism to design sequential C programs. The use

Visualization program development using Java

International Nuclear Information System (INIS)

Sasaki, Akira; Suto, Keiko

2002-03-01

Method of visualization programs using Java for the PC with the graphical user interface (GUI) is discussed, and applied to the visualization and analysis of 1D and 2D data from experiments and numerical simulations. Based on an investigation of programming techniques such as drawing graphics and event driven program, example codes are provided in which GUI is implemented using the Abstract Window Toolkit (AWT). The marked advantage of Java comes from the inclusion of library routines for graphics and networking as its language specification, which enables ordinary scientific programmers to make interactive visualization a part of their simulation codes. Moreover, the Java programs are machine independent at the source level. Object oriented programming (OOP) methods used in Java programming will be useful for developing large scientific codes which includes number of modules with better maintenance ability. (author)

Model Checker for Java Programs

Science.gov (United States)

Visser, Willem

2007-01-01

Java Pathfinder (JPF) is a verification and testing environment for Java that integrates model checking, program analysis, and testing. JPF consists of a custom-made Java Virtual Machine (JVM) that interprets bytecode, combined with a search interface to allow the complete behavior of a Java program to be analyzed, including interleavings of concurrent programs. JPF is implemented in Java, and its architecture is highly modular to support rapid prototyping of new features. JPF is an explicit-state model checker, because it enumerates all visited states and, therefore, suffers from the state-explosion problem inherent in analyzing large programs. It is suited to analyzing programs less than 10kLOC, but has been successfully applied to finding errors in concurrent programs up to 100kLOC. When an error is found, a trace from the initial state to the error is produced to guide the debugging. JPF works at the bytecode level, meaning that all of Java can be model-checked. By default, the software checks for all runtime errors (uncaught exceptions), assertions violations (supports Java s assert), and deadlocks. JPF uses garbage collection and symmetry reductions of the heap during model checking to reduce state-explosion, as well as dynamic partial order reductions to lower the number of interleavings analyzed. JPF is capable of symbolic execution of Java programs, including symbolic execution of complex data such as linked lists and trees. JPF is extensible as it allows for the creation of listeners that can subscribe to events during searches. The creation of dedicated code to be executed in place of regular classes is supported and allows users to easily handle native calls and to improve the efficiency of the analysis.

Real-Time MENTAT programming language and architecture

Science.gov (United States)

Grimshaw, Andrew S.; Silberman, Ami; Liu, Jane W. S.

1989-01-01

Real-time MENTAT, a programming environment designed to simplify the task of programming real-time applications in distributed and parallel environments, is described. It is based on the same data-driven computation model and object-oriented programming paradigm as MENTAT. It provides an easy-to-use mechanism to exploit parallelism, language constructs for the expression and enforcement of timing constraints, and run-time support for scheduling and exciting real-time programs. The real-time MENTAT programming language is an extended C++. The extensions are added to facilitate automatic detection of data flow and generation of data flow graphs, to express the timing constraints of individual granules of computation, and to provide scheduling directives for the runtime system. A high-level view of the real-time MENTAT system architecture and programming language constructs is provided.

A Java program for LRE-based real-time qPCR that enables large-scale absolute quantification.

Science.gov (United States)

Rutledge, Robert G

2011-03-02

Linear regression of efficiency (LRE) introduced a new paradigm for real-time qPCR that enables large-scale absolute quantification by eliminating the need for standard curves. Developed through the application of sigmoidal mathematics to SYBR Green I-based assays, target quantity is derived directly from fluorescence readings within the central region of an amplification profile. However, a major challenge of implementing LRE quantification is the labor intensive nature of the analysis. Utilizing the extensive resources that are available for developing Java-based software, the LRE Analyzer was written using the NetBeans IDE, and is built on top of the modular architecture and windowing system provided by the NetBeans Platform. This fully featured desktop application determines the number of target molecules within a sample with little or no intervention by the user, in addition to providing extensive database capabilities. MS Excel is used to import data, allowing LRE quantification to be conducted with any real-time PCR instrument that provides access to the raw fluorescence readings. An extensive help set also provides an in-depth introduction to LRE, in addition to guidelines on how to implement LRE quantification. The LRE Analyzer provides the automated analysis and data storage capabilities required by large-scale qPCR projects wanting to exploit the many advantages of absolute quantification. Foremost is the universal perspective afforded by absolute quantification, which among other attributes, provides the ability to directly compare quantitative data produced by different assays and/or instruments. Furthermore, absolute quantification has important implications for gene expression profiling in that it provides the foundation for comparing transcript quantities produced by any gene with any other gene, within and between samples.

JavaScript programming pushing the limits

CERN Document Server

Raasch, Jon

2013-01-01

Take your JavaScript knowledge as far as it can go JavaScript has grown up, and it's a hot topic. Newer and faster JavaScript VMs and frameworks built upon them have increased the popularity of JavaScript for server-side web applications, and rich JS applications are being developed for mobile devices. This book delivers a compelling tutorial, showing you how to build a real-world app from the ground up. Experienced developers who want to master the latest techniques and redefine their skills will find this deep dive into JavaScript's hidden functionalities gives them the tools to

Parallel programming with Easy Java Simulations

Science.gov (United States)

Esquembre, F.; Christian, W.; Belloni, M.

2018-01-01

Nearly all of today's processors are multicore, and ideally programming and algorithm development utilizing the entire processor should be introduced early in the computational physics curriculum. Parallel programming is often not introduced because it requires a new programming environment and uses constructs that are unfamiliar to many teachers. We describe how we decrease the barrier to parallel programming by using a java-based programming environment to treat problems in the usual undergraduate curriculum. We use the easy java simulations programming and authoring tool to create the program's graphical user interface together with objects based on those developed by Kaminsky [Building Parallel Programs (Course Technology, Boston, 2010)] to handle common parallel programming tasks. Shared-memory parallel implementations of physics problems, such as time evolution of the Schrödinger equation, are available as source code and as ready-to-run programs from the AAPT-ComPADRE digital library.

Designing Abstractions for JavaScript Program Analysis

DEFF Research Database (Denmark)

Andreasen, Esben Sparre

JavaScript is a widely used dynamic programming language. What started out as a client-side scripting language for browsers, is now used for large applications in many different settings. As for other dynamic languages, JavaScript makes it easy to write programs quickly without being constrained...... by the language, and programmers exploit that power to write highly dynamic programs. Automated tools for helping programmers and optimizing programs are used successfully for many programming languages. Unfortunately, the automated tools for JavaScript are not as good as for other programming languages....... The program analyses, that the automated tools are built upon, are poorly suited to deal with the highly dynamic nature of JavaScript programs. The lack of language restrictions on the programmer are detrimental to the quality of program analyses for JavaScript. The aim of this dissertation is to address...

Scala for Java developers

CERN Document Server

Alexandre, Thomas

2014-01-01

This step-by-step guide is full of easy-to-follow code taken from real-world examples explaining the migration and integration of Scala in a Java project. If you are a Java developer or a Java architect, working in Java EE-based solutions and want to start using Scala in your daily programming, this book is ideal for you. This book will get you up and running quickly by adopting a pragmatic approach with real-world code samples. No prior knowledge of Scala is required.

Real time programming environment for Windows

Energy Technology Data Exchange (ETDEWEB)

LaBelle, D.R. [LaBelle (Dennis R.), Clifton Park, NY (United States)

1998-04-01

This document provides a description of the Real Time Programming Environment (RTProE). RTProE tools allow a programmer to create soft real time projects under general, multi-purpose operating systems. The basic features necessary for real time applications are provided by RTProE, leaving the programmer free to concentrate efforts on his specific project. The current version supports Microsoft Windows{trademark} 95 and NT. The tasks of real time synchronization and communication with other programs are handled by RTProE. RTProE includes a generic method for connecting a graphical user interface (GUI) to allow real time control and interaction with the programmer`s product. Topics covered in this paper include real time performance issues, portability, details of shared memory management, code scheduling, application control, Operating System specific concerns and the use of Computer Aided Software Engineering (CASE) tools. The development of RTProE is an important step in the expansion of the real time programming community. The financial costs associated with using the system are minimal. All source code for RTProE has been made publicly available. Any person with access to a personal computer, Windows 95 or NT, and C or FORTRAN compilers can quickly enter the world of real time modeling and simulation.

Declarative Programming in Java

Directory of Open Access Journals (Sweden)

Razvan DINA

2014-03-01

Full Text Available Despite the code is rarely self-explanatory, the imperative programming languages are the most commonly used in our days by the programmers all over the world and Java is definitely the lead language in popularity. This paper tries to conclude if there are any chances to use the most popular programming language of the moment in a declarative manner, even if Java itself is an intrinsic imperative language.

A Java program for LRE-based real-time qPCR that enables large-scale absolute quantification.

Directory of Open Access Journals (Sweden)

Robert G Rutledge

Full Text Available BACKGROUND: Linear regression of efficiency (LRE introduced a new paradigm for real-time qPCR that enables large-scale absolute quantification by eliminating the need for standard curves. Developed through the application of sigmoidal mathematics to SYBR Green I-based assays, target quantity is derived directly from fluorescence readings within the central region of an amplification profile. However, a major challenge of implementing LRE quantification is the labor intensive nature of the analysis. FINDINGS: Utilizing the extensive resources that are available for developing Java-based software, the LRE Analyzer was written using the NetBeans IDE, and is built on top of the modular architecture and windowing system provided by the NetBeans Platform. This fully featured desktop application determines the number of target molecules within a sample with little or no intervention by the user, in addition to providing extensive database capabilities. MS Excel is used to import data, allowing LRE quantification to be conducted with any real-time PCR instrument that provides access to the raw fluorescence readings. An extensive help set also provides an in-depth introduction to LRE, in addition to guidelines on how to implement LRE quantification. CONCLUSIONS: The LRE Analyzer provides the automated analysis and data storage capabilities required by large-scale qPCR projects wanting to exploit the many advantages of absolute quantification. Foremost is the universal perspective afforded by absolute quantification, which among other attributes, provides the ability to directly compare quantitative data produced by different assays and/or instruments. Furthermore, absolute quantification has important implications for gene expression profiling in that it provides the foundation for comparing transcript quantities produced by any gene with any other gene, within and between samples.

A Simple Application Program Interface for Saving Java Program Data on a Wiki

OpenAIRE

Yamanoue, Takashi; Oda, Kentaro; Shimozono, Koichi

2012-01-01

A simple application program interface (API) for Java programs running on a wiki is implemented experimentally. A Java program with the API can be running on a wiki, and the Java program can save its data on the wiki. The Java program consists of PukiWiki, which is a popular wiki in Japan, and a plug-in, which starts up Java programs and classes of Java. A Java applet with default access privilege cannot save its data at a local host. We have constructed an API of applets for easy and unified...

Infrastructure for Rapid Development of Java GUI Programs

Science.gov (United States)

Jones, Jeremy; Hostetter, Carl F.; Wheeler, Philip

2006-01-01

The Java Application Shell (JAS) is a software framework that accelerates the development of Java graphical-user-interface (GUI) application programs by enabling the reuse of common, proven GUI elements, as distinguished from writing custom code for GUI elements. JAS is a software infrastructure upon which Java interactive application programs and graphical user interfaces (GUIs) for those programs can be built as sets of plug-ins. JAS provides an application- programming interface that is extensible by application-specific plugins that describe and encapsulate both specifications of a GUI and application-specific functionality tied to the specified GUI elements. The desired GUI elements are specified in Extensible Markup Language (XML) descriptions instead of in compiled code. JAS reads and interprets these descriptions, then creates and configures a corresponding GUI from a standard set of generic, reusable GUI elements. These elements are then attached (again, according to the XML descriptions) to application-specific compiled code and scripts. An application program constructed by use of JAS as its core can be extended by writing new plug-ins and replacing existing plug-ins. Thus, JAS solves many problems that Java programmers generally solve anew for each project, thereby reducing development and testing time.

A Type Graph Model for Java Programs

NARCIS (Netherlands)

Rensink, Arend; Zambon, Eduardo

2009-01-01

In this report we present a type graph that models all executable constructs of the Java programming language. Such a model is useful for any graph-based technique that relies on a representation of Java programs as graphs. The model can be regarded as a common representation to which all Java

Writing Kurdish Alphabetics in Java Programming Language

OpenAIRE

Rebwar Mala Nabi; Sardasht M-Raouf Mahmood; Mohammed Qadir Kheder; Shadman Mahmood

2016-01-01

Nowadays, Kurdish programmers usually suffer when they need to write Kurdish letter while they program in java. More to say, all the versions of Java Development Kits have not supported Kurdish letters. Therefore, the aim of this study is to develop Java Kurdish Language Package (JKLP) for solving writing Kurdish alphabetic in Java programming language. So that Kurdish programmer and/or students they can converts the English-alphabetic to Kurdish-alphabetic. Furthermore, adding Kurdish langua...

Storm real-time processing cookbook

CERN Document Server

Anderson, Quinton

2013-01-01

A Cookbook with plenty of practical recipes for different uses of Storm.If you are a Java developer with basic knowledge of real-time processing and would like to learn Storm to process unbounded streams of data in real time, then this book is for you.

A Type Graph Model for Java Programs

NARCIS (Netherlands)

Rensink, Arend; Zambon, Eduardo; Lee, D.; Lopes, A.; Poetzsch-Heffter, A.

2009-01-01

In this work we present a type graph that models all executable constructs of the Java programming language. Such a model is useful for any graph-based technique that relies on a representation of Java programs as graphs. The model can be regarded as a common representation to which all Java syntax

Criticality: static profiling for real-time programs

DEFF Research Database (Denmark)

Brandner, Florian; Hepp, Stefan; Jordan, Alexander

2014-01-01

With the increasing performance demand in real-time systems it becomes more and more important to provide feedback to programmers and software development tools on the performance-relevant code parts of a real-time program. So far, this information was limited to an estimation of the worst....... Experiments using well-established real-time benchmark programs show an interesting distribution of the criticality values, revealing considerable amounts of highly critical as well as uncritical code. The metric thus provides ideal information to programmers and software development tools to optimize...... view covering the entire code base, tools in the spirit of program profiling are required. This work proposes an efficient approach to compute worst-case timing information for all code parts of a program using a complementary metric, called criticality. Every statement of a program is assigned...

Automatic Construction of Java Programs from Functional Program Specifications

OpenAIRE

Md. Humayun Kabir

2015-01-01

This paper presents a novel approach to construct Java programs automatically from the input functional program specifications on natural numbers from the constructive proofs of the input specifications using an inductive theorem prover called Poiti'n. The construction of a Java program from the input functional program specification involves two phases. The theorem prover is used to construct a higher order functional (HOF) program from the input specification expressed as an existential the...

Pointer Analysis for JavaScript Programming Tools

DEFF Research Database (Denmark)

Feldthaus, Asger

Tools that can assist the programmer with tasks, such as, refactoring or code navigation, have proven popular for Java, C#, and other programming languages. JavaScript is a widely used programming language, and its users could likewise benefit from such tools, but the dynamic nature of the language...... is an obstacle for the development of these. Because of this, tools for JavaScript have long remained ineffective compared to those for many other programming languages. Static pointer analysis can provide a foundation for more powerful tools, although the design of this analysis is itself a complicated endeavor....... In this work, we explore techniques for performing pointer analysis of JavaScript programs, and we find novel applications of these techniques. In particular, we demonstrate how these can be used for code navigation, automatic refactoring, semi-automatic refactoring of incomplete programs, and checking of type...

Monitoring and Acquisition Real-time System (MARS)

Science.gov (United States)

Holland, Corbin

2013-01-01

MARS is a graphical user interface (GUI) written in MATLAB and Java, allowing the user to configure and control the Scalable Parallel Architecture for Real-Time Acquisition and Analysis (SPARTAA) data acquisition system. SPARTAA not only acquires data, but also allows for complex algorithms to be applied to the acquired data in real time. The MARS client allows the user to set up and configure all settings regarding the data channels attached to the system, as well as have complete control over starting and stopping data acquisition. It provides a unique "Test" programming environment, allowing the user to create tests consisting of a series of alarms, each of which contains any number of data channels. Each alarm is configured with a particular algorithm, determining the type of processing that will be applied on each data channel and tested against a defined threshold. Tests can be uploaded to SPARTAA, thereby teaching it how to process the data. The uniqueness of MARS is in its capability to be adaptable easily to many test configurations. MARS sends and receives protocols via TCP/IP, which allows for quick integration into almost any test environment. The use of MATLAB and Java as the programming languages allows for developers to integrate the software across multiple operating platforms.

Building Real-Time Collaborative Applications with a Federated Architecture

Directory of Open Access Journals (Sweden)

Pablo Ojanguren-Menendez

2015-12-01

Full Text Available Real-time collaboration is being offered by multiple libraries and APIs (Google Drive Real-time API, Microsoft Real-Time Communications API, TogetherJS, ShareJS, rapidly becoming a mainstream option for webservices developers. However, they are offered as centralised services running in a single server, regardless if they are free/open source or proprietary software. After re-engineering Apache Wave (former Google Wave, we can now provide the first decentralised and federated free/open source alternative. The new API allows to develop new real-time collaborative web applications in both JavaScript and Java environments.

HTML5 programming with JavaScript for dummies

CERN Document Server

Mueller, John Paul

2013-01-01

Web designers and programmers, add JavaScript to your HTML5 development toolkit without fear Modern websites are complex, and some of the most exciting features - things like geolocation, canvas, portability to mobile and more - require JavaScript to leverage what HTML5 can create. Don't know JavaScript? That's where HTML5 Programming with JavaScript For Dummies comes in. Rather than walking you through JavaScript as a programming language, it approaches JavaScript as a tool to help you enhance web pages. Helps web designers and programmers tap the full power of HT

Ivor Horton's Beginning Java

CERN Document Server

Horton, Ivor

2011-01-01

Find out why thousands have turned to Ivor Horton for learning Java Ivor Horton's approach is teaching Java is so effective and popular that he is one of the leading authors of introductory programming tutorials, with over 160,000 copies of his Java books sold. In this latest edition, whether you're a beginner or an experienced programmer switching to Java, you'll learn how to build real-world Java applications using Java SE 7. The author thoroughly covers the basics as well as new features such as extensions and classes; extended coverage of the Swing Application Framework; and he does it all

Real-time object-oriented programming: studies and proposals

International Nuclear Information System (INIS)

Fouquier, Gilles

1996-01-01

This thesis contributes to the introduction of real-time features in object-oriented programming. Object-oriented programming favours modularity and reusability. Therefore, its application to real-time introduces many theoretical and conceptual problems. To deal with these problems, a new real-time object-oriented programming model is presented. This model is based on the active object model which allows concurrence and maintains the encapsulation property. The real-time aspect is treated by replacing the concept of task by the concept of method processing and by associating a real-time constraint to each message (priority or deadline). The set of all the running methods is scheduled. This model, called ATOME, contains several sub-models to deal with the usual concurrence control integrating their priority and deadline processing. The classical HPF and EDF scheduling avoid priority or deadline inversion. This model and its variants are new proposals to program real-time applications in the object-oriented way, therefore easing reusability and code writing. The feasibility of this approach is demonstrated by extending and existing active object-based language to real-time, in using the rules defined in the ATOME model. (author) [fr

Practical database programming with Java

CERN Document Server

Bai, Ying

2011-01-01

"This important resource offers a detailed description about the practical considerations and applications in database programming using Java NetBeans 6.8 with authentic examples and detailed explanations. This book provides readers with a clear picture as to how to handle the database programming issues in the Java NetBeans environment. The book is ideal for classroom and professional training material. It includes a wealth of supplemental material that is available for download including Powerpoint slides, solution manuals, and sample databases"--

JAVA CONCURENT PROGRAM FOR THE SMARANDACHE FUNCTION

OpenAIRE

Power, David; Tabirca, S.; Tabirca, T.

2004-01-01

The aim of this article is to propose a Java concurrent program for the Smarandache fimction based on an equation. Some results concerning the theoretical complexity of this program are proposed. Finally, the experimental results of the sequential and Java programs are given in order to demonstrate the efficiency of the conament implementation.

Java 7 A Beginner's Tutorial

CERN Document Server

Kurniawan, Budi

2011-01-01

A Books24x7's TOP 10 title for 4 consecutive years! Java is an easy language to learn. However, you need to master more than the language syntax to be a professional Java programmer. For one, object-oriented programming (OOP) skill is key to developing robust and effective Java applications. In addition, knowing how to use the vast collection of libraries makes development more rapid. This book introduces you to important programming concepts and teaches how to use the Java core libraries. It is a guide to building real-world applications, both desktop and Web-based. The coverage is the

3D real-time monitoring system for LHD plasma heating experiment

International Nuclear Information System (INIS)

Emoto, M.; Narlo, J.; Kaneko, O.; Komori, A.; Iima, M.; Yamaguchi, S.; Sudo, S.

2001-01-01

The JAVA-based real-time monitoring system has been in use at the National Institute for Fusion Science, Japan, since the end of March 1988 to maintain stable operations. This system utilizes JAVA technology to realize its platform-independent nature. The main programs are written as JAVA applets and provide human-friendly interfaces. In order to enhance the system's easy-recognition nature, a 3D feature is added. Since most of the system is written mainly in JAVA language, we adopted JAVA3D technology, which was easy to incorporate into the current running systems. With this 3D feature, the operator can more easily find the malfunctioning parts of complex instruments, such as LHD vacuum vessels. This feature is also helpful for recognizing physical phenomena. In this paper, we present an example in which the temperature increases of a vacuum vessel after NBI are visualized

Model-Checking Real-Time Control Programs

DEFF Research Database (Denmark)

Iversen, T. K.; Kristoffersen, K. J.; Larsen, Kim Guldstrand

2000-01-01

In this paper, we present a method for automatic verification of real-time control programs running on LEGO(R) RCX(TM) bricks using the verification tool UPPALL. The control programs, consisting of a number of tasks running concurrently, are automatically translated into the mixed automata model...... of UPPAAL. The fixed scheduling algorithm used by the LEGO(R) RCX(TM) processor is modeled in UPPALL, and supply of similar (sufficient) timed automata models for the environment allows analysis of the overall real-time system using the tools of UPPALL. To illustrate our technique for sorting LEGO(R) bricks...

Efficient Incremental Checkpointing of Java Programs

DEFF Research Database (Denmark)

Lawall, Julia Laetitia; Muller, Gilles

2000-01-01

This paper investigates the optimization of language-level checkpointing of Java programs. First, we describe how to systematically associate incremental checkpoints with Java classes. While being safe, the genericness of this solution induces substantial execution overhead. Second, to solve...

76 FR 42536 - Real-Time System Management Information Program

Science.gov (United States)

2011-07-19

...-Time System Management Information Program AGENCY: Federal Highway Administration (FHWA), DOT. ACTION... Real-Time System Management Information Program and general information about current and planned... establishing requirements for the Real-Time System Management Information Program on November 8, 2010, at 75 FR...

75 FR 68418 - Real-Time System Management Information Program

Science.gov (United States)

2010-11-08

...-Time System Management Information Program AGENCY: Federal Highway Administration (FHWA), DOT. ACTION...) to establish a Real-Time System Management Information Program that provides, in all States, the... traveler information. The purposes of the Real-Time System Management Information Program are to: (1...

Molecule-oriented programming in Java

NARCIS (Netherlands)

Bergstra, J.A.

2002-01-01

Molecule-oriented programming is introduced as a programming style carrying some perspective for Java. A sequence of examples is provided. Supporting the development of the molecule-oriented programming style several matters are introduced and developed: profile classes allowing the representation

JavaScript programmer's reference

CERN Document Server

Valentine, Thomas

2013-01-01

JavaScript Programmer's Reference is an invaluable resource that won't stray far from your desktop (or your tablet!). It contains detailed information on every JavaScript object and command, and combines that reference with practical examples showcasing how you can use those commands in the real world. Whether you're just checking the syntax of a method or you're starting out on the road to JavaScript mastery, the JavaScript Programmer's Reference will be an essential aid.  With a detailed and informative tutorial section giving you the ins and outs of programming with JavaScript and the DOM f

Functional programming in JavaScript

CERN Document Server

Mantyla, Dan

2015-01-01

If you are a JavaScript developer interested in learning functional programming, looking for the quantum leap towards mastering the JavaScript language, or just want to become a better programmer in general, then this book is ideal for you. It is aimed at programmers involved in developing reactive frontend apps, server-side apps that wrangle with reliability and concurrency, and everything in between.

Object-oriented Programming Laws for Annotated Java Programs

Directory of Open Access Journals (Sweden)

Gabriel Falconieri Freitas

2010-03-01

Full Text Available Object-oriented programming laws have been proposed in the context of languages that are not combined with a behavioral interface specification language (BISL. The strong dependence between source-code and interface specifications may cause a number of difficulties when transforming programs. In this paper we introduce a set of programming laws for object-oriented languages like Java combined with the Java Modeling Language (JML. The set of laws deals with object-oriented features taking into account their specifications. Some laws deal only with features of the specification language. These laws constitute a set of small transformations for the development of more elaborate ones like refactorings.

Hardware locks for a real-time Java chip multiprocessor

DEFF Research Database (Denmark)

Strøm, Torur Biskopstø; Puffitsch, Wolfgang; Schoeberl, Martin

2016-01-01

A software locking mechanism commonly protects shared resources for multithreaded applications. This mechanism can, especially in chip-multiprocessor systems, result in a large synchronization overhead. For real-time systems in particular, this overhead increases the worst-case execution time....... This improvement can allow a larger number of real-time tasks to be reliably scheduled on a multiprocessor real-time platform....

Professional Java EE design patterns

CERN Document Server

Yener, Murat

2014-01-01

Master Java EE design pattern implementation to improve your design skills and your application's architecture Professional Java EE Design Patterns is the perfect companion for anyone who wants to work more effectively with Java EE, and the only resource that covers both the theory and application of design patterns in solving real-world problems. The authors guide readers through both the fundamental and advanced features of Java EE 7, presenting patterns throughout, and demonstrating how they are used in day-to-day problem solving. As the most popular programming language in community-dri

Professional XMPP Programming with JavaScript and jQuery

CERN Document Server

Moffitt, Jack

2010-01-01

Create real-time, highly interactive apps quickly with the powerful XMPP protocol. XMPP is a robust protocol used for a wide range of applications, including instant messaging, multi-user chat, voice and video conferencing, collaborative spaces, real-time gaming, data synchronization, and search. This book teaches you how to harness the power of XMPP in your own apps and presents you with all the tools you need to build the next generation of apps using XMPP or add new features to your current apps. Featuring the JavaScript language throughout and making use of the jQuery library, the book con

Real-time web application development with Vert.x 2.0

CERN Document Server

Parviainen, Tero

2013-01-01

A quick, clear, and concise tutorial-guide-based approach that helps you to develop a web application based on Vert.x.Real-time Web Application Development with Vert.x is written for web developers who want to take the next step and dive into real-time web application development.This book uses JavaScript (and some Java) to introduce the Vert.x platform, so basic JavaScript knowledge is expected. If you're planning to write your applications using some of the other Vert.x languages, all the techniques and concepts will translate to them directly. All you need to do is refer to the Vert.x API r

An evaluation of safety-critical Java on a Java processor

OpenAIRE

Rios Rivas, Juan Ricardo; Schoeberl, Martin

2014-01-01

The safety-critical Java (SCJ) specification provides a restricted set of the Java language intended for applications that require certification. In order to test the specification, implementations are emerging and the need to evaluate those implementations in a systematic way is becoming important. In this paper we evaluate our SCJ implementation which is based on the Java Optimized Processor JOP and we measure different performance and timeliness criteria relevant to hard real-time systems....

Supporting Multiprocessors in the Icecap Safety-Critical Java Run-Time Environment

DEFF Research Database (Denmark)

Zhao, Shuai; Wellings, Andy; Korsholm, Stephan Erbs

The current version of the Safety Critical Java (SCJ) specification defines three compliance levels. Level 0 targets single processor programs while Level 1 and 2 can support multiprocessor platforms. Level 1 programs must be fully partitioned but Level 2 programs can also be more globally...... scheduled. As of yet, there is no official Reference Implementation for SCJ. However, the icecap project has produced a Safety-Critical Java Run-time Environment based on the Hardware-near Virtual Machine (HVM). This supports SCJ at all compliance levels and provides an implementation of the safety......-critical Java (javax.safetycritical) package. This is still work-in-progress and lacks certain key features. Among these is the ability to support multiprocessor platforms. In this paper, we explore two possible options to adding multiprocessor support to this environment: the “green thread” and the “native...

Diseño de un Software de Intermediación de Comunicación para Sistemas Distribuidos de Tiempo Real Críticos en Java

Directory of Open Access Journals (Sweden)

Daniel Tejera

2013-04-01

Full Text Available Resumen: Las facilidades e independencia de plataforma de Java han generado un gran interés en la comunidad de tiempo real. Dicho interés se ha reflejado en la especificación RTSJ (Real-Time Specification for Java, que extiende y adapta el lenguaje Java para permitir el desarrollo de sistemas de tiempo real. Adicionalmente, se han desarrollado perfiles de RTSJ para garantizar la predecibilidad en sistemas de tiempo real críticos. Sin embargo, RTSJ y sus perfiles no proporcionan facilidades para sistemas distribuidos. El objetivo de este trabajo es afrontar dicha limitación definiendo un nuevo modelo de RMI (Remote Method Invocation basado en los principales perfiles de RTSJ para sistemas de tiempo real crítico. Este trabajo presenta el diseño y la implementación de RMI-HRT (RMI-Hard Real-Time que está enfocado a sistemas de tiempo real crítico con requisitos de alta integridad. Abstract: Distributed real-time embedded systems are becoming increasingly important to society. More demands will be made on them and greater reliance will be placed on the delivery of their services. A relevant subset of them is high-integrity or hard real-time systems, where failure can cause loss of life, environmental harm, or significant financial loss.Additionally, the evolution of communication networks and paradigms as well as the necessity of demanding processing power and fault tolerance, motivated the interconnection between electronic devices; many of the communications have the possibility of transferring data at a high speed. The concept of distributed systems emerged as systems where different parts are executed on several nodes that interact with each other via a communication network.Java's popularity, facilities and platform independence have made it an interesting language for the real-time and embedded community. This was the motivation for the development of RTSJ (Real-Time Specification for Java, which is a language extension intended to

Real-Time Multiprocessor Programming Language (RTMPL) user's manual

Science.gov (United States)

Arpasi, D. J.

1985-01-01

A real-time multiprocessor programming language (RTMPL) has been developed to provide for high-order programming of real-time simulations on systems of distributed computers. RTMPL is a structured, engineering-oriented language. The RTMPL utility supports a variety of multiprocessor configurations and types by generating assembly language programs according to user-specified targeting information. Many programming functions are assumed by the utility (e.g., data transfer and scaling) to reduce the programming chore. This manual describes RTMPL from a user's viewpoint. Source generation, applications, utility operation, and utility output are detailed. An example simulation is generated to illustrate many RTMPL features.

Patterns for Safety-Critical Java Memory Usage

DEFF Research Database (Denmark)

Rios Rivas, Juan Ricardo; Nilsen, Kelvin; Schoeberl, Martin

2012-01-01

Scoped memories are introduced in real-time Java profiles in order to make object allocation and deallocation time and space predictable. However, explicit scoping requires care from programmers when dealing with temporary objects, passing scope-allocated objects as arguments to methods, and retu......Scoped memories are introduced in real-time Java profiles in order to make object allocation and deallocation time and space predictable. However, explicit scoping requires care from programmers when dealing with temporary objects, passing scope-allocated objects as arguments to methods...... are illustrated by implementations in the safety-critical Java profile....

A Test Suite for Safety-Critical Java using JML

DEFF Research Database (Denmark)

Ravn, Anders Peter; Søndergaard, Hans

2013-01-01

Development techniques are presented for a test suite for the draft specification of the Java profile for Safety-Critical Systems. Distinguishing features are: specification of conformance constraints in the Java Modeling Language, encoding of infrastructure concepts without implementation bias......, and corresponding specifications of implicitly stated behavioral and real-time properties. The test programs are auto-generated from the specification, while concrete values for test parameters are selected manually. The suite is open source and publicly accessible....

Type Analysis for JavaScript

DEFF Research Database (Denmark)

Jensen, Simon Holm; Møller, Anders; Thiemann, Peter

2009-01-01

common programming errors – or rather, prove their absence, and for producing type information for program comprehension. Preliminary experiments conducted on real-life JavaScript code indicate that the approach is promising regarding analysis precision on small and medium size programs, which constitute...

Real-Time Engagement Area Development Program (READ-Pro)

National Research Council Canada - National Science Library

Burger, Joseph

2002-01-01

The Real Time Engagement Area Development Program (READ-Pro) is a PC-based prototype system which provides company-level commanders with real-time operational analysis tools to develop ENGAGEMENT AREAS(EA) for direct fire (DF) systems...

Dynamic Learning Objects to Teach Java Programming Language

Science.gov (United States)

Narasimhamurthy, Uma; Al Shawkani, Khuloud

2010-01-01

This article describes a model for teaching Java Programming Language through Dynamic Learning Objects. The design of the learning objects was based on effective learning design principles to help students learn the complex topic of Java Programming. Visualization was also used to facilitate the learning of the concepts. (Contains 1 figure and 2…

The Java Legacy Interface

DEFF Research Database (Denmark)

Korsholm, Stephan

2007-01-01

The Java Legacy Interface is designed to use Java for encapsulating native legacy code on small embedded platforms. We discuss why existing technologies for encapsulating legacy code (JNI) is not sufficient for an important range of small embedded platforms, and we show how the Java Legacy...... Interface offers this previously missing functionality. We describe an implementation of the Java Legacy Interface for a particular virtual machine, and how we have used this virtual machine to integrate Java with an existing, commercial, soft real-time, C/C++ legacy platform....

Real-Time Payload Control and Monitoring on the World Wide Web

Science.gov (United States)

Sun, Charles; Windrem, May; Givens, John J. (Technical Monitor)

1998-01-01

World Wide Web (W3) technologies such as the Hypertext Transfer Protocol (HTTP) and the Java object-oriented programming environment offer a powerful, yet relatively inexpensive, framework for distributed application software development. This paper describes the design of a real-time payload control and monitoring system that was developed with W3 technologies at NASA Ames Research Center. Based on Java Development Toolkit (JDK) 1.1, the system uses an event-driven "publish and subscribe" approach to inter-process communication and graphical user-interface construction. A C Language Integrated Production System (CLIPS) compatible inference engine provides the back-end intelligent data processing capability, while Oracle Relational Database Management System (RDBMS) provides the data management function. Preliminary evaluation shows acceptable performance for some classes of payloads, with Java's portability and multimedia support identified as the most significant benefit.

Beginning Java programming the object-oriented approach

CERN Document Server

Baesens, Bart; vanden Broucke, Seppe

2015-01-01

A comprehensive Java guide, with samples, exercises, case studies, and step-by-step instruction Beginning Java Programming: The Object Oriented Approach is a straightforward resource for getting started with one of the world's most enduringly popular programming languages. Based on classes taught by the authors, the book starts with the basics and gradually builds into more advanced concepts. The approach utilizes an integrated development environment that allows readers to immediately apply what they learn, and includes step-by-step instruction with plenty of sample programs. Each chapter c

Static Profiling of the Worst-Case in Real-Time Programs

DEFF Research Database (Denmark)

Brandner, Florian; Hepp, Stefan; Jordan, Alexander

2012-01-01

With the increasing performance demand in real-time systems it becomes more and more relevant to provide feedback to engineers and programmers, but also software development tools, on the performance-relevant code parts of a real-time program. So far, the information provided to programmers through...... other code parts. To give an accurate view covering the entire code base, tools in the spirit of standard program profiling tools are required. This work proposes an efficient approach to compute worst-case timing information for all code parts of a program using a complementary metric, called...... criticality. Every statement of a real-time program is assigned a criticality value, expressing how critical the respective code is with respect to the global WCET. This gives an accurate view to programmers how close the worst execution path passing through a specific part of a real-time program...

Java 8 recipes

CERN Document Server

Dea, Carl; Guime, Freddy; OConner, John; Juneau, Josh

2014-01-01

Java 8 Recipes offers solutions to common programming problems encountered while developing Java-based applications. Fully updated with the newest features and techniques available, Java 8 Recipes provides code examples involving Lambdas, embedded scripting with Nashorn, the new date-time API, stream support, functional interfaces, and much more. Especial emphasis is given to features such as lambdas that are newly introduced in Java 8. Content is presented in the popular problem-solution format: Look up the programming problem that you want to solve. Read the solution. Apply the solution dir

Humanoid Robotics: Real-Time Object Oriented Programming

Science.gov (United States)

Newton, Jason E.

2005-01-01

Programming of robots in today's world is often done in a procedural oriented fashion, where object oriented programming is not incorporated. In order to keep a robust architecture allowing for easy expansion of capabilities and a truly modular design, object oriented programming is required. However, concepts in object oriented programming are not typically applied to a real time environment. The Fujitsu HOAP-2 is the test bed for the development of a humanoid robot framework abstracting control of the robot into simple logical commands in a real time robotic system while allowing full access to all sensory data. In addition to interfacing between the motor and sensory systems, this paper discusses the software which operates multiple independently developed control systems simultaneously and the safety measures which keep the humanoid from damaging itself and its environment while running these systems. The use of this software decreases development time and costs and allows changes to be made while keeping results safe and predictable.

JavaD: Bringing Ownership Domains to Mainstream Java

National Research Council Canada - National Science Library

Abi-Antoun, Marwan; Aldrich, Jonathan

2006-01-01

.... As a result, none of the tool support for Java programs is available for AliasJava programs, making it harder to justify the case that Java programs are easier to evolve with Alias-Java annotations than without...

Software engineering aspects of real-time programming concepts

Science.gov (United States)

Schoitsch, Erwin

1986-08-01

Real-time programming is a discipline of great importance not only in process control, but also in fields like communication, office automation, interactive databases, interactive graphics and operating systems development. General concepts of concurrent programming and constructs for process-synchronization are discussed in detail. Tasking and synchronization concepts, methods of process communication, interrupt and timeout handling in systems based on semaphores, signals, conditional critical regions or on real-time languages like Concurrent PASCAL, MODULA, CHILL and ADA are explained and compared with each other. The second part deals with structuring and modularization of technical processes to build reliable and maintainable real time systems. Software-quality and software engineering aspects are considered throughout the paper.

Real-time systems

OpenAIRE

Badr, Salah M.; Bruztman, Donald P.; Nelson, Michael L.; Byrnes, Ronald Benton

1992-01-01

This paper presents an introduction to the basic issues involved in real-time systems. Both real-time operating sys and real-time programming languages are explored. Concurrent programming and process synchronization and communication are also discussed. The real-time requirements of the Naval Postgraduate School Autonomous Under Vehicle (AUV) are then examined. Autonomous underwater vehicle (AUV), hard real-time system, real-time operating system, real-time programming language, real-time sy...

An investigation of factors related to self-efficacy for Java programming among computer science education students

Directory of Open Access Journals (Sweden)

Desmond Wesley Govender

2015-11-01

Full Text Available Students usually perceived computer programming courses as one of the most difficult courses since learning to program is perceived as a difficult task. Quite often students’ negative perceptions on computer programming results in poor results and high drop-out rates. The purpose of this study is to examine the impact of factors that affect computer science education students’ Java programming self-efficacy and the relationship between Java programming self-efficacy and students’ age and gender. A questionnaire was used to gather data. A scale with thirty-two items assessing Java programming self-efficacy was adapted from Askar and Davenport’s (2009 computer programming self-efficacy scale. A total of twenty students from a Computer Science Education Discipline participated in this study. Collected data were analysed using SPSS version 22.0. Descriptive statistics, reliability test, mean, standard deviation, and rotated component matrix were utilized to analyze the resulting data. Results indicated that there is not much difference between males (45% and females (55% Java programming self-efficacy. Furthermore, the results also indicated that programming skills and Java constructs have higher influence on the self-efficacy for Java programming among computer science education students followed by non-complexity, time consciousness, ability to recode for better understanding and self-motivation.

An evaluation of safety-critical Java on a Java processor

DEFF Research Database (Denmark)

Rios Rivas, Juan Ricardo; Schoeberl, Martin

2014-01-01

The safety-critical Java (SCJ) specification provides a restricted set of the Java language intended for applications that require certification. In order to test the specification, implementations are emerging and the need to evaluate those implementations in a systematic way is becoming important....... In this paper we evaluate our SCJ implementation which is based on the Java Optimized Processor JOP and we measure different performance and timeliness criteria relevant to hard real-time systems. Our implementation targets Level 0 and Level1 of the specification and to test it we use a series of micro...

Real-Time Engagement Area Development Program (Read-Pro)

National Research Council Canada - National Science Library

Burger, Joseph

2002-01-01

The Real-Tine Engagement Area Development Program (READ-Pro) is a PC-based prototype system which provides company-level commanders with real-time operational analysis tools to develop engagement areas (RA) for direct fire (DR) systems...

Visualization of object-oriented (Java) programs

NARCIS (Netherlands)

Huizing, C.; Kuiper, R.; Luijten, C.A.A.M.; Vandalon, V.; Helfert, M.; Martins, M.J.; Cordeiro, J.

2012-01-01

We provide an explicit, consistent, execution model for OO programs, specifically Java, together with a tool that visualizes the model This equips the student with a model to think and communicate about OO programs. Especially for an e-learning situation this is significant. Firstly, such a model

A predictable Java profile

DEFF Research Database (Denmark)

Bøgholm, Thomas; Hansen, Rene Rydhof; Ravn, Anders Peter

2009-01-01

A Java profile suitable for development of high integrity embedded systems is presented. It is based on event handlers which are grouped in missions and equipped with respectively private handler memory and shared mission memory. This is a result of our previous work on developing a Java profile......, and is directly inspired by interactions with the Open Group on their on-going work on a safety critical Java profile (JSR-302). The main contribution is an arrangement of the class hierarchy such that the proposal is a generalization of Real-Time Specification for Java (RTSJ). A further contribution...

Scientific Programming Using Java: A Remote Sensing Example

Science.gov (United States)

Prados, Don; Mohamed, Mohamed A.; Johnson, Michael; Cao, Changyong; Gasser, Jerry

1999-01-01

This paper presents results of a project to port remote sensing code from the C programming language to Java. The advantages and disadvantages of using Java versus C as a scientific programming language in remote sensing applications are discussed. Remote sensing applications deal with voluminous data that require effective memory management, such as buffering operations, when processed. Some of these applications also implement complex computational algorithms, such as Fast Fourier Transformation analysis, that are very performance intensive. Factors considered include performance, precision, complexity, rapidity of development, ease of code reuse, ease of maintenance, memory management, and platform independence. Performance of radiometric calibration code written in Java for the graphical user interface and of using C for the domain model are also presented.

Functional Programming for Java Developers Tools for Better Concurrency, Abstraction, and Agility

CERN Document Server

Wampler, Dean

2011-01-01

Software development today is embracing functional programming (FP), whether it's for writing concurrent programs or for managing Big Data. Where does that leave Java developers? This concise book offers a pragmatic, approachable introduction to FP for Java developers or anyone who uses an object-oriented language. Dean Wampler, Java expert and author of Programming Scala (O'Reilly), shows you how to apply FP principles such as immutability, avoidance of side-effects, and higher-order functions to your Java code. Each chapter provides exercises to help you practice what you've learned. Once

The CERN PS/SL Controls Java Application Programming Interface

International Nuclear Information System (INIS)

I. Deloose; J. Cuperus; P. Charrue; F. DiMaio; K. Kostro; M. Vanden Eynden; W. Watson

1999-01-01

The PS/SL Convergence Project was launched in March 1998. Its objective is to deliver a common control as infrastructure for the CERN accelerators by year 2001. In the framework of this convergence activity, a project was launched to develop a Java Application Programming Interface (API) between programs written in the Java language and the PS and SL accelerator equipment. This Java API was specified and developed in collaboration with TJNAF. It is based on the Java CDEV [1] package that has been extended in order to end up with a CERN/TJNAF common product. It implements a detailed model composed of devices organized in named classes that provide a property-based interface. It supports data subscription and introspection facilities. The device model is presented and the capabilities of the API are described with syntax examples. The software architecture is also described

Real-Time Wait-Free Queues using Micro-Transactions

OpenAIRE

Meawad, Fadi; Iyer, Karthik; Schoeberl, Martin; Vitek, Jan

2011-01-01

This paper evaluates the applicability of transactional mem- ory to the implementation of dierent non-blocking data structures in the context of the Real-time Specication for Java. In particular, we argue that hardware support for micro-transaction allows us to implement eciently data structures that are often dicult to realize with the atomic operations provided by stock hardware. Our main imple- mentation platform is the Java Optimized Processor sys- tem. We report on the performance of dat...

SCJ-Circus: a refinement-oriented formal notation for Safety-Critical Java

Directory of Open Access Journals (Sweden)

Alvaro Miyazawa

2016-06-01

Full Text Available Safety-Critical Java (SCJ is a version of Java whose goal is to support the development of real-time, embedded, safety-critical software. In particular, SCJ supports certification of such software by introducing abstractions that enforce a simpler architecture, and simpler concurrency and memory models. In this paper, we present SCJ-Circus, a refinement-oriented formal notation that supports the specification and verification of low-level programming models that include the new abstractions introduced by SCJ. SCJ-Circus is part of the family of state-rich process algebra Circus, as such, SCJ-Circus includes the Circus constructs for modelling sequential and concurrent behaviour, real-time and object orientation. We present here the syntax and semantics of SCJ-Circus, which is defined by mapping SCJ-Circus constructs to those of standard Circus. This is based on an existing approach for modelling SCJ programs. We also extend an existing Circus-based refinement strategy that targets SCJ programs to account for the generation of SCJ-Circus models close to implementations in SCJ.

A programming and a modelling perspective on the evaluation of Java Card implementations

OpenAIRE

Hartel, Pieter H.; de Jong, E.; de Jong, Eduard; Attali, Isabelle; Jensen, Thomas

2000-01-01

Java Card Technology has provided a huge step forward in programming smart cards: from assembler to using a high level Object Oriented language. However, the authors have found some differences between the current Java Card version (2.1) and main stream Java that may restrict the benefits of using Java achievable in smartcard programming. In particular, efforts towards evaluating Java Card implementations at a high level of assurance may be hampered by the presence of these differences as wel...

Real-time analytics with Storm and Cassandra

CERN Document Server

Saxena, Shilpi

2015-01-01

If you want to efficiently use Storm and Cassandra together and excel at developing production-grade, distributed real-time applications, then this book is for you. No prior knowledge of using Storm and Cassandra together is necessary. However, a background in Java is expected.

Java 3D Interactive Visualization for Astrophysics

Science.gov (United States)

Chae, K.; Edirisinghe, D.; Lingerfelt, E. J.; Guidry, M. W.

2003-05-01

We are developing a series of interactive 3D visualization tools that employ the Java 3D API. We have applied this approach initially to a simple 3-dimensional galaxy collision model (restricted 3-body approximation), with quite satisfactory results. Running either as an applet under Web browser control, or as a Java standalone application, this program permits real-time zooming, panning, and 3-dimensional rotation of the galaxy collision simulation under user mouse and keyboard control. We shall also discuss applications of this technology to 3-dimensional visualization for other problems of astrophysical interest such as neutron star mergers and the time evolution of element/energy production networks in X-ray bursts. *Managed by UT-Battelle, LLC, for the U.S. Department of Energy under contract DE-AC05-00OR22725.

Development of in-plant real-time materials control: the DYMAC program

International Nuclear Information System (INIS)

Augustson, R.H.

1976-01-01

LASL is in the process of developing a dynamic materials control program, called DYMAC, to provide the technology for stringent real-time nuclear materials control. The DYMAC program combines hardware and software into four component subsystems: nondestructive assay (NDA), instrumentation, data acquisition, data base management, and real-time accountability. To demonstrate the feasibility of DYMAC, a working real-time materials control system will be installed at the new plutonium facility presently under construction at LASL. Program emphasis is on developing practical solutions to generic problems and communicating those solutions to other installations for use throughout the nuclear fuel cycle

Explicit Precedence Constraints in Safety-Critical Java

DEFF Research Database (Denmark)

Puffitsch, Wolfgang; Noulard, Eric; Pagetti, Claire

2013-01-01

Safety-critical Java (SCJ) aims at making the amenities of Java available for the development of safety-critical applications. The multi-rate synchronous language Prelude facilitates the specification of the communication and timing requirements of complex real-time systems. This paper combines...... to provide explicit support for precedence constraints. We present the considerations behind the design of this extension and discuss our experiences with a first prototype implementation based on the SCJ implementation of the Java Optimized Processor....

Study of Real-Time Programming for Simulation of Nuclear Reactor Dynamics

International Nuclear Information System (INIS)

Aliq; Widi Setiawan; Hendro Tjahjono

2003-01-01

Many aspects of real-time system are reviewed including the method, programming techniques, and its possibility to be applied in research reactor. The main point of real-time system is that it must designed to have a characteristics not only fast response but the most important is on-time response. In order to cover this requirements, real-time system need also a simple operating system consist of a kernel and application software. At the level of programming, real-time system require a modular approach, hard and soft time division and interprocess communications. The implementation can include some real-time (RT) operation system such as: RT-Linux, RT-OS9 and RT-Mat lab. Because of fast and on-time response requirements, if this system is going to be applied to research reactor, the transfer function model maybe more appropriate model compared to point kinetics model for the reason of computation time. (author)

The state of the Java universe

CERN Multimedia

CERN. Geneva

2007-01-01

Speaker Bio: James Gosling received a B.Sc. in computer science from the University of Calgary, Canada in 1977. He received a Ph.D. in computer science from Carnegie-Mellon University in 1983. The title of his thesis was The Algebraic Manipulation of Constraints. He has built satellite data acquisition systems, a multiprocessor version of UNIX®, several compilers, mail systems, and window managers. He has also built a WYSIWYG text editor, a constraint-based drawing editor, and a text editor called Emacs, for UNIX systems. At Sun his early activity was as lead engineer of the NeWS window system. He did the original design of the Java programming language and implemented its original compiler and virtual machine. He has recently been a contributor to the Real-Time Specification for Java.

A Java Bytecode Metamodel for Composable Program Analyses

NARCIS (Netherlands)

Yildiz, Bugra Mehmet; Bockisch, Christoph; Rensink, Arend; Aksit, Mehmet; Seidl, Martina; Zschaler, Steffen

Program analyses are an important tool to check if a system fulfills its specification. A typical implementation strategy for program analyses is to use an imperative, general-purpose language like Java; and access the program to be analyzed through libraries for manipulating intermediate code, such

Real-time C++ efficient object-oriented and template microcontroller programming

CERN Document Server

Kormanyos, Christopher

2013-01-01

This is a highly practical guide to programming real-time embedded microcontroller systems in C++. Its many examples are backed by real-time performance measurements and size analyses that quantify the true cost of the code to the last byte and microsecond.

Multi-Language Programming Environments for High Performance Java Computing

Directory of Open Access Journals (Sweden)

Vladimir Getov

1999-01-01

Full Text Available Recent developments in processor capabilities, software tools, programming languages and programming paradigms have brought about new approaches to high performance computing. A steadfast component of this dynamic evolution has been the scientific community’s reliance on established scientific packages. As a consequence, programmers of high‐performance applications are reluctant to embrace evolving languages such as Java. This paper describes the Java‐to‐C Interface (JCI tool which provides application programmers wishing to use Java with immediate accessibility to existing scientific packages. The JCI tool also facilitates rapid development and reuse of existing code. These benefits are provided at minimal cost to the programmer. While beneficial to the programmer, the additional advantages of mixed‐language programming in terms of application performance and portability are addressed in detail within the context of this paper. In addition, we discuss how the JCI tool is complementing other ongoing projects such as IBM’s High‐Performance Compiler for Java (HPCJ and IceT’s metacomputing environment.

Programming spiders, bots, and aggregators in Java

CERN Document Server

Heaton, Jeff

2006-01-01

The content and services available on the web continue to be accessed mostly through direct human control. But this is changing. Increasingly, users rely on automated agents that save them time and effort by programmatically retrieving content, performing complex interactions, and aggregating data from diverse sources. Programming Spiders, Bots, and Aggregators in Java teaches you how to build and deploy a wide variety of these agents-from single-purpose bots to exploratory spiders to aggregators that present a unified view of information from multiple user accounts. You will quickly build on

Study on Design and Implementation of JAVA Programming Procedural Assessment Standard

Science.gov (United States)

Tingting, Xu; Hua, Ma; Xiujuan, Wang; Jing, Wang

2015-01-01

The traditional JAVA course examination is just a list of questions from which we cannot know students' skills of programming. According to the eight abilities in curriculum objectives, we designed an assessment standard of JAVA programming course that is based on employment orientation and apply it to practical teaching to check the teaching…

Real-Time Wait-Free Queues using Micro-Transactions

DEFF Research Database (Denmark)

Meawad, Fadi; Iyer, Karthik; Schoeberl, Martin

2011-01-01

This paper evaluates the applicability of transactional mem- ory to the implementation of dierent non-blocking data structures in the context of the Real-time Specication for Java. In particular, we argue that hardware support for micro-transaction allows us to implement eciently data structures...... that are often dicult to realize with the atomic operations provided by stock hardware. Our main imple- mentation platform is the Java Optimized Processor sys- tem. We report on the performance of data structures imple- mented with locks, compare and swap and micro-transactions. Our results conrm...

Real Time Text Analysis

Science.gov (United States)

Senthilkumar, K.; Ruchika Mehra Vijayan, E.

2017-11-01

This paper aims to illustrate real time analysis of large scale data. For practical implementation we are performing sentiment analysis on live Twitter feeds for each individual tweet. To analyze sentiments we will train our data model on sentiWordNet, a polarity assigned wordNet sample by Princeton University. Our main objective will be to efficiency analyze large scale data on the fly using distributed computation. Apache Spark and Apache Hadoop eco system is used as distributed computation platform with Java as development language

Safety Critical Java for Robotics Programming

DEFF Research Database (Denmark)

Thomsen, Bent; Luckow, Kasper Søe; Bøgholm, Thomas

2015-01-01

This paper introduces Safety Critical Java (SCJ) and argues its readiness for robotics programming. We give an overview of the work done at Aalborg University and elsewhere on SCJl, some of its implementations in the form of the JOP, FijiVM and HVM and some of the tools, especially WCA, Teta...

Adding Wildcards to the Java Programming Language

DEFF Research Database (Denmark)

Torgersen, Mads; Hansen, Christian Plesner; Ernst, Erik

2004-01-01

, by using ‘?’ to denote unspecified type arguments. Thus they essentially unify the distinct families of classes that parametric polymorphism introduces. Wildcards are implemented as part of the addition of generics to the JavaTM programming language, and is thus deployed world-wide as part...... of the reference implementation of the Java compiler javac available from Sun Microsystems, Inc. By providing a richer type system, wildcards allow for an improved type inference scheme for polymorphic method calls. Moreover, by means of a novel notion of wildcard capture, polymorphic methods can be used to give...... symbolic names to unspecified types, in a manner similar to the “open� construct known from existential types. Wildcards show up in numerous places in the Java Platform APIs of the newest release, and some of the examples in this paper are taken from these APIs....

Permission-Based Separation Logic for Multithreaded Java Programs

NARCIS (Netherlands)

Haack, Christian; Huisman, Marieke; Hurlin, C.

2011-01-01

This paper motivates and presents a program logic for reasoning about multithreaded Java-like programs with concurrency primitives such as dynamic thread creation, thread joining and reentrant object monitors. The logic is based on concurrent separation logic. It is the first detailed adaptation of

Safety-Critical Java for Embedded Systems

DEFF Research Database (Denmark)

Rios Rivas, Juan Ricardo

for Java aims at providing a reduced set of the Java programming language that can be used for systems that need to be certified at the highest levels of criticality. Safety-critical Java (SCJ) restricts how a developer can structure an application by providing a specific programming model...... and by restricting the set of methods and libraries that can be used. Furthermore, its memory model do not use a garbage-collected heap but scoped memories. In this thesis we examine the use of the SCJ specification through an implementation in a time-predictable, FPGA-based Java processor. The specification is now...

Reasoning about Java programs in higher order logic using PVS and Isabelle

NARCIS (Netherlands)

Huisman, Marieke

2001-01-01

This thesis describes the first steps of a project aimed at formal verification of Java programs. The work presented here is part of a larger project called LOOP, for Logic of Object Oriented Programming. A semantics for Java is described in type theory and it is shown how this semantics forms the

JavaScript and jQuery for data analysis and visualization

CERN Document Server

Raasch, Jon; Ogievetsky, Vadim; Lowery, Joseph

2014-01-01

Go beyond design concepts-build dynamic data visualizations using JavaScript JavaScript and jQuery for Data Analysis and Visualization goes beyond design concepts to show readers how to build dynamic, best-of-breed visualizations using JavaScript-the most popular language for web programming. The authors show data analysts, developers, and web designers how they can put the power and flexibility of modern JavaScript libraries to work to analyze data and then present it using best-of-breed visualizations. They also demonstrate the use of each technique with real-world use cases, showing how to

Programming real-time executives in higher order language

Science.gov (United States)

Foudriat, E. C.

1982-01-01

Methods by which real-time executive programs can be implemented in a higher order language are discussed, using HAL/S and Path Pascal languages as program examples. Techniques are presented by which noncyclic tasks can readily be incorporated into the executive system. Situations are shown where the executive system can fail to meet its task scheduling and yet be able to recover either by rephasing the clock or stacking the information for later processing. The concept of deadline processing is shown to enable more effective mixing of time and information synchronized systems.

Some measurements of Java-to-bytecode compiler performance in the Java Virtual Machine

OpenAIRE

Daly, Charles; Horgan, Jane; Power, James; Waldron, John

2001-01-01

In this paper we present a platform independent analysis of the dynamic profiles of Java programs when executing on the Java Virtual Machine. The Java programs selected are taken from the Java Grande Forum benchmark suite, and five different Java-to-bytecode compilers are analysed. The results presented describe the dynamic instruction usage frequencies.

A predictable Java profile - rationale and implementations

DEFF Research Database (Denmark)

Søndergaard, Hans; Bøgholm, Thomas; Hansen, Rene Rydhof

A Java profile suitable for development of high integrity embedded systems is presented. It is based on event handlers which are grouped in missions and equipped with respectively private handler memory and shared mission memory. This is a result of our previous work on developing a Java profile......, and is directly inspired by interactions with the Open Group on their on-going work on a safety critical Java profile (JSR-302). The main contribution is an arrangement of the class hierarchy such that the proposal is a generalization of Real-Time Specification for Java (RTSJ). A further contribution...

nodeGame: Real-time, synchronous, online experiments in the browser.

Science.gov (United States)

Balietti, Stefano

2017-10-01

nodeGame is a free, open-source JavaScript/ HTML5 framework for conducting synchronous experiments online and in the lab directly in the browser window. It is specifically designed to support behavioral research along three dimensions: (i) larger group sizes, (ii) real-time (but also discrete time) experiments, and (iii) batches of simultaneous experiments. nodeGame has a modular source code, and defines an API (application programming interface) through which experimenters can create new strategic environments and configure the platform. With zero-install, nodeGame can run on a great variety of devices, from desktop computers to laptops, smartphones, and tablets. The current version of the software is 3.0, and extensive documentation is available on the wiki pages at http://nodegame.org .

Real Time Systems

DEFF Research Database (Denmark)

Christensen, Knud Smed

2000-01-01

Describes fundamentals of parallel programming and a kernel for that. Describes methods for modelling and checking parallel problems. Real time problems.......Describes fundamentals of parallel programming and a kernel for that. Describes methods for modelling and checking parallel problems. Real time problems....

A programming and a modelling perspective on the evaluation of Java Card implementations

NARCIS (Netherlands)

Hartel, Pieter H.; de Jong, E.; de Jong, Eduard; Attali, Isabelle; Jensen, Thomas

Java Card Technology has provided a huge step forward in programming smart cards: from assembler to using a high level Object Oriented language. However, the authors have found some differences between the current Java Card version (2.1) and main stream Java that may restrict the benefits of using

Java for dummies

CERN Document Server

Burd

2014-01-01

The top-selling beginning Java book is now fully updated! As an unstoppably platform-independent, object-oriented programming language, Java is used for developing web and mobile applications. In this up-to-date bestselling book, veteran author Barry Burd shows you how to create basic Java objects and clearly explains when you should simply reuse existing code. Explores how the new version of Java offers more robust functionality and new features such as closures to keep Java competitive with more syntax-friendly languages like Python and Ruby Covers object-oriented programming basics with Ja

Learning Java

CERN Document Server

Niemeyer, Patrick

2005-01-01

Version 5.0 of the Java 2 Standard Edition SDK is the most important upgrade since Java first appeared a decade ago. With Java 5.0, you'll not only find substantial changes in the platform, but to the language itself-something that developers of Java took five years to complete. The main goal of Java 5.0 is to make it easier for you to develop safe, powerful code, but none of these improvements makes Java any easier to learn, even if you've programmed with Java for years. And that means our bestselling hands-on tutorial takes on even greater significance. Learning Java is the most widely sou

JavaScript & jQuery The Missing Manual

CERN Document Server

McFarland, David

2011-01-01

JavaScript lets you supercharge your HTML with animation, interactivity, and visual effects-but many web designers find the language hard to learn. This jargon-free guide covers JavaScript basics and shows you how to save time and effort with the jQuery library of prewritten JavaScript code. You'll soon be building web pages that feel and act like desktop programs, without having to do much programming. The important stuff you need to know: Make your pages interactive. Create JavaScript events that react to visitor actions.Use animations and effects. Build drop-down navigation menus, pop-ups

Permission-based separation logic for multi-threaded Java programs

NARCIS (Netherlands)

Amighi, A.; Haack, Christian; Huisman, Marieke; Hurlin, C.

This paper presents a program logic for reasoning about multithreaded Java-like programs with concurrency primitives such as dynamic thread creation, thread joining and reentrant object monitors. The logic is based on concurrent separation logic. It is the first detailed adaptation of concurrent

An Investigation of Factors Related to Self-Efficacy for Java Programming among Engineering Students

Science.gov (United States)

Askar, Petek; Davenport, David

2009-01-01

The purpose of this study was to examine the factors related to self-efficacy for Java programming among first year engineering students. An instrument assessing Java programming self-efficacy was developed from the computer programming self-efficacy scale of Ramalingam & Wiedenbeck. The instrument was administered at the beginning of the…

After an Earthquake: Accessing Near Real-Time Data in the Classroom

Science.gov (United States)

Bravo, T. K.; Coleman, B.; Hubenthal, M.; Owens, T. J.; Taber, J.; Welti, R.; Weertman, B. R.

2010-12-01

One of the best ways to engage students in scientific content is to give them opportunities to work with real scientific instruments and data and enable them to experience the discovery of scientific information. In addition, newsworthy earthquakes can capture the attention and imagination of students. IRIS and collaborating partners provide a range of options to leverage that attention through access to near-real-time earthquake location and waveform data stored in the IRIS Data Management System and elsewhere via a number of web-based tools and a new Java-based application. The broadest audience is reached by the Seismic Monitor, a simple Web-based tool for observing near-real-time seismicity. The IRIS Earthquake Browser (IEB) allows users to explore recent and cataloged earthquakes and aftershock patterns online with more flexibility, and K-12 classroom activities for understanding plate tectonics and estimating seismic hazards have been designed around its use. Waveforms are easily viewed and explored on the web using the Rapid Earthquake Viewer (REV), developed by the University of South Carolina in collaboration with IRIS E&O. Data from recent well-known earthquakes available via REV are used in exercises to determine Earth’s internal structure and to locate earthquakes. Three component data is presented to the students, allowing a much more realistic analysis of the data than is presented in most textbooks. The Seismographs in Schools program uses real-time data in the classroom to interest and engage students about recent earthquakes. Through the IRIS website, schools can share event data and 24-hr images. Additionally, data is available in real-time via the API. This API allows anyone to extract data, re-purpose it, and display it however they need to, as is being done by the British Geological Survey Seismographs in Schools program. Over 350 schools throughout the US and internationally are currently registered with the IRIS Seismographs in Schools

Synthèse de gestionnaires mémoire pour applications Java temps-réel embarquées

OpenAIRE

Salagnac , Guillaume

2008-01-01

In this thesis, we address the problem of dynamic memory management in real-time embedded Java systems. When programming in C or C++, all memory management is done explicitly by the programmer, inducing numerous execution faults because of hazardous use of memory operations. This greatly increases software development costs, because such errors are very hard to debug. The Java language tackles this problem by offering automatic memory management, thanks to the use of a garbage collector. Howe...

RAY TRACING IMPLEMENTATION IN JAVA PROGRAMMING LANGUAGE

OpenAIRE

Aybars UĞUR; Mustafa TÜRKSEVER

2002-01-01

In this paper realism in computer graphics and components providing realism are discussed at first. It is mentioned about illumination models, surface rendering methods and light sources for this aim. After that, ray tracing which is a technique for creating two dimensional image of a three-dimensional virtual environment is explained briefly. A simple ray tracing algorithm was given. "SahneIzle" which is a ray tracing program implemented in Java programming language which ...

Functional-light JavaScript balanced, pragmatic FP in JavaScript

CERN Document Server

Simpson, Kyle

2017-01-01

Functional-Light JavaScript is a balanced, pragmatic exploration of Functional Programming in JavaScript. Functional Programming (FP) is an incredibly powerful paradigm for structuring code that yields more robust, verifiable, and readable programs. If you've ever tried to learn FP but struggled with terms like "monad", mathematical concepts like category theory, or symbols like (lambda), you're not alone. Functional-Light programming distills the most vital aspects of FP—function purity, value immutability, composition, and more!—down to approachable JavaScript patterns. Rather than the all-or-nothing dogmatism often encountered in FP, this book teaches you how to improve your programs line by line.

The Delft-Java Engine

NARCIS (Netherlands)

Glossner III, C.J.

2001-01-01

In this dissertation, we describe the DELFT-JAVA engine - a 32-bit RISC-based architecture that provides high performance JAVA program execution. More specifically we describe a microarchitecture that accelerates JAVA execution and provide details of the DELFT-JAVA architecture for executing JAVA

Java Series: Java Essentials I. what is Java. Basic Language Constructs

CERN Multimedia

CERN. Geneva

2000-01-01

The tutorial will firstly give a very first general introduction of what is the JAVA programming language and an overview of what the Java Development environment consists of. It will briefly explain its relation to the Internet, Web browsers and Operating Systems and show how to access Java at CERN. Then, the tutorial will be centred on explaining the basic language constructs to create classes, instances, and implement inheritance, destroy objects, etc. It will show the usage of interfaces. The tutorial is open to everyone. Attendants are required to have a basic intuition on what Object Orientation is, or to have followed the previous tutorial on the Java Serires. Organiser(s): M.Marquina and R.Ramos /IT-User Support

Numeric computation and statistical data analysis on the Java platform

CERN Document Server

Chekanov, Sergei V

2016-01-01

Numerical computation, knowledge discovery and statistical data analysis integrated with powerful 2D and 3D graphics for visualization are the key topics of this book. The Python code examples powered by the Java platform can easily be transformed to other programming languages, such as Java, Groovy, Ruby and BeanShell. This book equips the reader with a computational platform which, unlike other statistical programs, is not limited by a single programming language. The author focuses on practical programming aspects and covers a broad range of topics, from basic introduction to the Python language on the Java platform (Jython), to descriptive statistics, symbolic calculations, neural networks, non-linear regression analysis and many other data-mining topics. He discusses how to find regularities in real-world data, how to classify data, and how to process data for knowledge discoveries. The code snippets are so short that they easily fit into single pages. Numeric Computation and Statistical Data Analysis ...

Improving the interactivity and functionality of Web-based radiology teaching files with the Java programming language.

Science.gov (United States)

Eng, J

1997-01-01

Java is a programming language that runs on a "virtual machine" built into World Wide Web (WWW)-browsing programs on multiple hardware platforms. Web pages were developed with Java to enable Web-browsing programs to overlay transparent graphics and text on displayed images so that the user could control the display of labels and annotations on the images, a key feature not available with standard Web pages. This feature was extended to include the presentation of normal radiologic anatomy. Java programming was also used to make Web browsers compatible with the Digital Imaging and Communications in Medicine (DICOM) file format. By enhancing the functionality of Web pages, Java technology should provide greater incentive for using a Web-based approach in the development of radiology teaching material.

WCET Analysis of Java Bytecode Featuring Common Execution Environments

DEFF Research Database (Denmark)

Luckow, Kasper Søe; Thomsen, Bent; Frost, Christian

2011-01-01

We present a novel tool for statically determining the Worst Case Execution Time (WCET) of Java Bytecode-based programs called Tool for Execution Time Analysis of Java bytecode (TetaJ). This tool differentiates itself from existing tools by separating the individual constituents of the execution...... environment into independent components. The prime benefit is that it can be used for execution environments featuring common embedded processors and software implementations of the JVM. TetaJ employs a model checking approach for statically determining WCET where the Java program, the JVM, and the hardware...

Teaching Introductory Programming to IS Students: Java Problems and Pitfalls

Science.gov (United States)

Pendergast, Mark O.

2006-01-01

This paper examines the impact the use of the Java programming language has had on the way our students learn to program and the success they achieve. The importance of a properly constructed first course in programming cannot be overstated. A course well experienced will leave students with good programming habits, the ability to learn on their…

Java for dummies

CERN Document Server

Burd, Barry

2011-01-01

The top-selling beginning Java book is now fully updated for Java 7! Java is the platform-independent, object-oriented programming language used for developing web and mobile applications. The revised version offers new functionality and features that have programmers excited, and this popular guide covers them all. This book helps programmers create basic Java objects and learn when they can reuse existing code. It's just what inexperienced Java developers need to get going quickly with Java 2 Standard Edition 7.0 (J2SE 7.0) and Java Development Kit 7.0 (JDK 7). Explores how the new version o

Real-world Bluetooth MANET Java Middleware

DEFF Research Database (Denmark)

Glenstrup, Arne John; Nielsen, Michael; Skytte, Frederik

We present BEDnet, a Java based middleware for creating and maintaining a Bluetooth based mobile ad-hoc network (MANET). MANETs are key to nomadic computing: Mobile units can set up spontaneous local networks when needed, removing the need for fixed network infrastructure, either as wireless access....... Based on the Java JSR-82 specification, BEDnet is portable to a wide selection of mobile phones, and is publicly available as open source software. Experiments show that e.g. media streaming over Bluetooth is feasible, and that BEDnet is able to set up a scatternet within a couple of minutes...

Real-Time Reactive Power Distribution in Microgrids by Dynamic Programing

DEFF Research Database (Denmark)

Levron, Yoash; Beck, Yuval; Katzir, Liran

2017-01-01

In this paper a new real-time optimization method for reactive power distribution in microgrids is proposed. The method enables location of a globally optimal distribution of reactive power under normal operating conditions. The method exploits the typical compact structure of microgrids to obtain...... combination of reactive powers, by means of dynamic programming. Since every single step involves a one-dimensional problem, the complexity of the solution is only linear with the number of clusters, and as a result, a globally optimal solution may be obtained in real time. The paper includes the results...

Adding Wildcards to the Java Programming Language

DEFF Research Database (Denmark)

Torgersen, Mads; Hansen, Christian Plesner; Ernst, Erik

2004-01-01

, by using '?' to denote unspecified type arguments. Thus they essentially unify the distinct families of classes often introduced by parametric polymorphism. Wildcards are implemented as part of the upcoming addition of generics to the Java™ programming language, and will thus be deployed world-wide as part...... of the reference implementation of the Java compiler javac available from Sun Microsystems, Inc. By providing a richer type system, wildcards allow for an improved type inference scheme for polymorphic method calls. Moreover, by means of a novel notion of wildcard capture, polymorphic methods can be used to give...... symbolic names to unspecified types, in a manner similar to the "open" construct known from existential types. Wildcards show up in numerous places in the Java Platform APIs of the upcoming release, and some of the examples in this paper are taken from these APIs....

Communicating Java Threads

NARCIS (Netherlands)

Hilderink, G.H.; Broenink, Johannes F.; Vervoort, Wiek; Bakkers, André; Bakkers, A.

The incorporation of multithreading in Java may be considered a significant part of the Java language, because it provides udimentary facilities for concurrent programming. However, we belief that the use of channels is a fundamental concept for concurrent programming. The channel approach as

Hierarchical programming language for modal multi-rate real-time stream processing applications

NARCIS (Netherlands)

Geuns, S.J.; Hausmans, J.P.H.M.; Bekooij, Marco Jan Gerrit

2014-01-01

Modal multi-rate stream processing applications with real-time constraints which are executed on multi-core embedded systems often cannot be conveniently specified using current programming languages. An important issue is that sequential programming languages do not allow for convenient programming

BPEL and Java cookbook

CERN Document Server

Laznik, Jurij

2013-01-01

The book is written in a Cookbook format with practical recipes aimed at helping you extend BPEL capabilities with Java.This book is aimed at Java developers who use BPEL programming to develop web services in SOA development. It is assumed that the readers are experienced with Java programming and SOA, but knowledge of BPEL is not necessarily required.

Semi-Automatic Rename Refactoring for JavaScript

DEFF Research Database (Denmark)

Feldthaus, Asger; Møller, Anders

2013-01-01

and interaction with the programmer. With this pragmatic approach, we can provide scalable and effective refactoring support for real-world code, including libraries and incomplete applications. Through a series of experiments that estimate how much manual effort our technique demands from the programmer, we show......Modern IDEs support automated refactoring for many programming languages, but support for JavaScript is still primitive. To perform renaming, which is one of the fundamental refactorings, there is often no practical alternative to simple syntactic search-and-replace. Although more sophisticated...... alternatives have been developed, they are limited by whole-program assumptions and poor scalability. We propose a technique for semi-automatic refactoring for JavaScript, with a focus on renaming. Unlike traditional refactoring algorithms, semi-automatic refactoring works by a combination of static analysis...

A Directory Service for the CERN PS/SL Java Programming Interface

International Nuclear Information System (INIS)

Cuperus, J.; Charrue, P.; DiMaio, F.; Kostro, K.; Watson, W.

1999-01-01

The CERN PS and SL accelerator control groups developed a common application programming interface (API) in Java [1]. Part of this API is a directory service that provide information about the underlying hardware and software. With this information, it is possible to write generic programs that do general actions on lists of devices without hard coding of device names. And, starting from a device name, full details about related devices, the device itself and its class and properties, can be obtained, including the meaning of bits and bit-patterns in status words. The interface definition is independent of any implementation but a reference implementation is provided using Java Database Connectivity (JDBC) against a set of tables in a relational database. Data from very different systems can be brought together and presented in a uniform way to the user. The full potential of the directory service is reached when it is used in software components (Java Beans)

Big Java late objects

CERN Document Server

Horstmann, Cay S

2012-01-01

Big Java: Late Objects is a comprehensive introduction to Java and computer programming, which focuses on the principles of programming, software engineering, and effective learning. It is designed for a two-semester first course in programming for computer science students.

Sawja: Static Analysis Workshop for Java

Science.gov (United States)

Hubert, Laurent; Barré, Nicolas; Besson, Frédéric; Demange, Delphine; Jensen, Thomas; Monfort, Vincent; Pichardie, David; Turpin, Tiphaine

Static analysis is a powerful technique for automatic verification of programs but raises major engineering challenges when developing a full-fledged analyzer for a realistic language such as Java. Efficiency and precision of such a tool rely partly on low level components which only depend on the syntactic structure of the language and therefore should not be redesigned for each implementation of a new static analysis. This paper describes the Sawja library: a static analysis workshop fully compliant with Java 6 which provides OCaml modules for efficiently manipulating Java bytecode programs. We present the main features of the library, including i) efficient functional data-structures for representing a program with implicit sharing and lazy parsing, ii) an intermediate stack-less representation, and iii) fast computation and manipulation of complete programs. We provide experimental evaluations of the different features with respect to time, memory and precision.

Modern multithreading implementing, testing, and debugging multithreaded Java and C++/Pthreads/Win32 programs

CERN Document Server

Carver, Richard H

2005-01-01

Master the essentials of concurrent programming,including testing and debuggingThis textbook examines languages and libraries for multithreaded programming. Readers learn how to create threads in Java and C++, and develop essential concurrent programming and problem-solving skills. Moreover, the textbook sets itself apart from other comparable works by helping readers to become proficient in key testing and debugging techniques. Among the topics covered, readers are introduced to the relevant aspects of Java, the POSIX Pthreads library, and the Windows Win32 Applications Programming Interface.

Real-time numerical simulation of the Carnot cycle

International Nuclear Information System (INIS)

Hurkala, J; Gall, M; Kutner, R; Maciejczyk, M

2005-01-01

We developed a highly interactive, multi-windows Java applet which made it possible to simulate and visualize within any platform and internet the Carnot cycle (or engine) in a real-time computer experiment. We extended our previous model and algorithm (Galant et al 2003 Heat Transfer, Newton's Law of Cooling and the Law of Entropy Increase Simulated by the Real-Time Computer Experiments in Java (Lecture Notes in Computer Science vol 2657) pp 45-53, Gall and Kutner 2005 Molecular mechanisms of heat transfer: Debye relaxation versus power-law Physica A 352 347-78) to simulate not only the heat flow but also the macroscopic movement of the piston. Since in reality it is impossible to construct a reversible Carnot engine, the question arises whether it is possible to simulate it at least in a numerical experiment? The positive answer to this question which we found is related to our model and algorithm which make it possible to omit the many-body problem arising when many gas particles simultaneously interact with the mobile piston. As usual, the considerations of phenomenological thermodynamics began with a study of the basic properties of heat engines, hence our approach, besides intrinsic physical significance, is also important from the educational, technological and even environmental points of view

Real-time software for the COMPASS tokamak plasma control

International Nuclear Information System (INIS)

Valcarcel, D.F.; Duarte, A.S.; Neto, A.; Carvalho, I.S.; Carvalho, B.B.; Fernandes, H.; Sousa, J.; Sartori, F.; Janky, F.; Cahyna, P.; Hron, M.; Panek, R.

2010-01-01

The COMPASS tokamak has started its operation recently in Prague and to meet the necessary operation parameters its real-time system, for data processing and control, must be designed for both flexibility and performance, allowing the easy integration of code from several developers and to guarantee the desired time cycle. For this purpose an Advanced Telecommunications Computing Architecture based real-time system has been deployed with a solution built on a multi-core x86 processor. It makes use of two software components: the BaseLib2 and the MARTe (Multithreaded Application Real-Time executor) real-time frameworks. The BaseLib2 framework is a generic real-time library with optimized objects for the implementation of real-time algorithms. This allowed to build a library of modules that process the acquired data and execute control algorithms. MARTe executes these modules in kernel space Real-Time Application Interface allowing to attain the required cycle time and a jitter of less than 1.5 μs. MARTe configuration and data storage are accomplished through a Java hardware client that connects to the FireSignal control and data acquisition software. This article details the implementation of the real-time system for the COMPASS tokamak, in particular the organization of the control code, the design and implementation of the communications with the actuators and how MARTe integrates with the FireSignal software.

Real-time software for the COMPASS tokamak plasma control

Energy Technology Data Exchange (ETDEWEB)

Valcarcel, D.F., E-mail: danielv@ipfn.ist.utl.p [Associacao EURATOM/IST, Instituto de Plasmas e Fusao Nuclear - Laboratorio Associado, Instituto Superior Tecnico, P-1049-001 Lisboa (Portugal); Duarte, A.S.; Neto, A.; Carvalho, I.S.; Carvalho, B.B.; Fernandes, H.; Sousa, J. [Associacao EURATOM/IST, Instituto de Plasmas e Fusao Nuclear - Laboratorio Associado, Instituto Superior Tecnico, P-1049-001 Lisboa (Portugal); Sartori, F. [Euratom-UKAEA, Culham Science Centre, Abingdon, OX14 3DB Oxon (United Kingdom); Janky, F.; Cahyna, P.; Hron, M.; Panek, R. [Institute of Plasma Physics AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Prague (Czech Republic)

2010-07-15

The COMPASS tokamak has started its operation recently in Prague and to meet the necessary operation parameters its real-time system, for data processing and control, must be designed for both flexibility and performance, allowing the easy integration of code from several developers and to guarantee the desired time cycle. For this purpose an Advanced Telecommunications Computing Architecture based real-time system has been deployed with a solution built on a multi-core x86 processor. It makes use of two software components: the BaseLib2 and the MARTe (Multithreaded Application Real-Time executor) real-time frameworks. The BaseLib2 framework is a generic real-time library with optimized objects for the implementation of real-time algorithms. This allowed to build a library of modules that process the acquired data and execute control algorithms. MARTe executes these modules in kernel space Real-Time Application Interface allowing to attain the required cycle time and a jitter of less than 1.5 {mu}s. MARTe configuration and data storage are accomplished through a Java hardware client that connects to the FireSignal control and data acquisition software. This article details the implementation of the real-time system for the COMPASS tokamak, in particular the organization of the control code, the design and implementation of the communications with the actuators and how MARTe integrates with the FireSignal software.

Remodularizing Java Programs for Improved Locality of Feature Implementations in Source Code

DEFF Research Database (Denmark)

Olszak, Andrzej; Jørgensen, Bo Nørregaard

2011-01-01

Explicit traceability between features and source code is known to help programmers to understand and modify programs during maintenance tasks. However, the complex relations between features and their implementations are not evident from the source code of object-oriented Java programs....... Consequently, the implementations of individual features are difficult to locate, comprehend, and modify in isolation. In this paper, we present a novel remodularization approach that improves the representation of features in the source code of Java programs. Both forward- and reverse restructurings...... are supported through on-demand bidirectional restructuring between feature-oriented and object-oriented decompositions. The approach includes a feature location phase based of tracing program execution, a feature representation phase that reallocates classes into a new package structure based on single...

FlashLight: A Dynamic Detector of Shared State, Race Conditions, and Locking Models in Concurrent Java Programs

National Research Council Canada - National Science Library

Hale, Scott C

2006-01-01

.... Many factors contribute to concurrency faults in Java code; for example, programmers may not understand Java language semantics or, when using a Java library or framework, may not understand that their resulting program is concurrent...

RAY TRACING IMPLEMENTATION IN JAVA PROGRAMMING LANGUAGE

Directory of Open Access Journals (Sweden)

Aybars UĞUR

2002-01-01

Full Text Available In this paper realism in computer graphics and components providing realism are discussed at first. It is mentioned about illumination models, surface rendering methods and light sources for this aim. After that, ray tracing which is a technique for creating two dimensional image of a three-dimensional virtual environment is explained briefly. A simple ray tracing algorithm was given. "SahneIzle" which is a ray tracing program implemented in Java programming language which can be used on the internet is introduced. As a result, importance of network-centric ray tracing software is discussed.

Real Time Revisited

Science.gov (United States)

Allen, Phillip G.

1985-12-01

The call for abolishing photo reconnaissance in favor of real time is once more being heard. Ten years ago the same cries were being heard with the introduction of the Charge Coupled Device (CCD). The real time system problems that existed then and stopped real time proliferation have not been solved. The lack of an organized program by either DoD or industry has hampered any efforts to solve the problems, and as such, very little has happened in real time in the last ten years. Real time is not a replacement for photo, just as photo is not a replacement for infra-red or radar. Operational real time sensors can be designed only after their role has been defined and improvements made to the weak links in the system. Plodding ahead on a real time reconnaissance suite without benefit of evaluation of utility will allow this same paper to be used ten years from now.

Safety-critical Java with cyclic executives on chip-multiprocessors

DEFF Research Database (Denmark)

Ravn, Anders P.; Schoeberl, Martin

2012-01-01

Chip-multiprocessors offer increased processing power at a low cost. However, in order to use them for real-time systems, tasks have to be scheduled efficiently and predictably. It is well known that finding optimal schedules is a computationally hard problem. In this paper we present a solution ...... for multiprocessors, we have implemented it in the context of safety-critical Java on a Java processor....

Effects of a Case-Based Reasoning System on Student Performance in a Java Programming Course

Science.gov (United States)

Schmidt, Cecil

2007-01-01

The purpose of this study was to determine if a case-based reasoning tool would improve a student's understanding of the complex concepts in a Java programming course. Subjects for the study were randomly assigned from two sections of an introductory Java programming course. Posttests were used to measure the effects of the case-based reasoning…

Using Runtime Analysis to Guide Model Checking of Java Programs

Science.gov (United States)

Havelund, Klaus; Norvig, Peter (Technical Monitor)

2001-01-01

This paper describes how two runtime analysis algorithms, an existing data race detection algorithm and a new deadlock detection algorithm, have been implemented to analyze Java programs. Runtime analysis is based on the idea of executing the program once. and observing the generated run to extract various kinds of information. This information can then be used to predict whether other different runs may violate some properties of interest, in addition of course to demonstrate whether the generated run itself violates such properties. These runtime analyses can be performed stand-alone to generate a set of warnings. It is furthermore demonstrated how these warnings can be used to guide a model checker, thereby reducing the search space. The described techniques have been implemented in the b e grown Java model checker called PathFinder.

Java performance tuning

CERN Document Server

Shirazi, Jack

2003-01-01

Performance has been an important issue for Java developers ever since the first version hit the streets. Over the years, Java performance has improved dramatically, but tuning is essential to get the best results, especially for J2EE applications. You can never have code that runs too fast. Java Peformance Tuning, 2nd edition provides a comprehensive and indispensable guide to eliminating all types of performance problems. Using many real-life examples to work through the tuning process in detail, JPT shows how tricks such as minimizing object creation and replacing strings with arrays can

Dynamic Frames Based Verification Method for Concurrent Java Programs

NARCIS (Netherlands)

Mostowski, Wojciech

2016-01-01

In this paper we discuss a verification method for concurrent Java programs based on the concept of dynamic frames. We build on our earlier work that proposes a new, symbolic permission system for concurrent reasoning and we provide the following new contributions. First, we describe our approach

Making real-time reactive systems reliable

Science.gov (United States)

Marzullo, Keith; Wood, Mark

1990-01-01

A reactive system is characterized by a control program that interacts with an environment (or controlled program). The control program monitors the environment and reacts to significant events by sending commands to the environment. This structure is quite general. Not only are most embedded real time systems reactive systems, but so are monitoring and debugging systems and distributed application management systems. Since reactive systems are usually long running and may control physical equipment, fault tolerance is vital. The research tries to understand the principal issues of fault tolerance in real time reactive systems and to build tools that allow a programmer to design reliable, real time reactive systems. In order to make real time reactive systems reliable, several issues must be addressed: (1) How can a control program be built to tolerate failures of sensors and actuators. To achieve this, a methodology was developed for transforming a control program that references physical value into one that tolerates sensors that can fail and can return inaccurate values; (2) How can the real time reactive system be built to tolerate failures of the control program. Towards this goal, whether the techniques presented can be extended to real time reactive systems is investigated; and (3) How can the environment be specified in a way that is useful for writing a control program. Towards this goal, whether a system with real time constraints can be expressed as an equivalent system without such constraints is also investigated.

Multi-Language Programming Environments for High Performance Java Computing

OpenAIRE

Vladimir Getov; Paul Gray; Sava Mintchev; Vaidy Sunderam

1999-01-01

Recent developments in processor capabilities, software tools, programming languages and programming paradigms have brought about new approaches to high performance computing. A steadfast component of this dynamic evolution has been the scientific community’s reliance on established scientific packages. As a consequence, programmers of high‐performance applications are reluctant to embrace evolving languages such as Java. This paper describes the Java‐to‐C Interface (JCI) tool which provides ...

Interrupt Handlers in Java

DEFF Research Database (Denmark)

Korsholm, Stephan; Schoeberl, Martin; Ravn, Anders Peter

2008-01-01

An important part of implementing device drivers is to control the interrupt facilities of the hardware platform and to program interrupt handlers. Current methods for handling interrupts in Java use a server thread waiting for the VM to signal an interrupt occurrence. It means that the interrupt...... is handled at a later time, which has some disadvantages. We present constructs that allow interrupts to be handled directly and not at a later point decided by a scheduler. A desirable feature of our approach is that we do not require a native middleware layer but can handle interrupts entirely with Java...... code. We have implemented our approach using an interpreter and a Java processor, and give an example demonstrating its use....

Java vs. Python Coverage of Introductory Programming Concepts: A Textbook Analysis

Science.gov (United States)

McMaster, Kirby; Sambasivam, Samuel; Rague, Brian; Wolthuis, Stuart

2017-01-01

In this research, we compare two languages, Java and Python, by performing a content analysis of words in textbooks that describe important programming concepts. Our goal is to determine which language has better textbook support for teaching introductory programming courses. We used the TextSTAT program to count how often our list of concept…

Programming a real-time operating system for satellite control applications Satellite Control Applications

International Nuclear Information System (INIS)

Omer, M.; Anjum, O.; Suddle, M.R.

2004-01-01

With the realization of ideas like formation flights and multi-body space vehicles the demands on an attitude control system have become increasingly complex. Even in its most simplified form, the control system for a typical geostationary satellite has to run various supervisory functions along with determination and control algorithms side by side. Within each algorithm it has to employ multiple actuation and sensing mechanisms and service real time interrupts, for example, in the case of actuator saturation and sensor data fusion. This entails the idea of thread scheduling and program synchronization, tasks specifically meant for a real time OS. This paper explores the embedding of attitude determination and control loop within the framework of a real time operating system provided for TI's DSP C6xxx series. The paper details out the much functionality provided within the scaleable real time kernel and the analysis and configuration tools available, It goes on to describe a layered implementation stack associated with a typical control for Geo Stationary satellites. An application for control is then presented in which state of the art analysis tools are employed to view program threads, synchronization semaphores, hardware interrupts and data exchange pipes operating in real time. (author)

IDA and the Technical Cooperation Program Real-Time Systems and Ada Workshop, 21-23 June 1988

Science.gov (United States)

1988-06-01

IDA Memorandum Report M-540, IDA and the Technical Cooperation Program Real - Time Systems and Ada Workshop, 21-23 June 1988, documents the results of... time systems , (2) identify and clarify known Ada real-time issues, (3) identify near-term and long-term solutions, and (4) provide assessment and...Technology (ODUSD R&AT). Funding was provided by the STARS Joint Program Office. The objectives were to (1) define requirements for using Ada in real

jFuzz: A Concolic Whitebox Fuzzer for Java

Science.gov (United States)

Jayaraman, Karthick; Harvison, David; Ganesh, Vijay; Kiezun, Adam

2009-01-01

We present jFuzz, a automatic testing tool for Java programs. jFuzz is a concolic whitebox fuzzer, built on the NASA Java PathFinder, an explicit-state Java model checker, and a framework for developing reliability and analysis tools for Java. Starting from a seed input, jFuzz automatically and systematically generates inputs that exercise new program paths. jFuzz uses a combination of concrete and symbolic execution, and constraint solving. Time spent on solving constraints can be significant. We implemented several well-known optimizations and name-independent caching, which aggressively normalizes the constraints to reduce the number of calls to the constraint solver. We present preliminary results due to the optimizations, and demonstrate the effectiveness of jFuzz in creating good test inputs. The source code of jFuzz is available as part of the NASA Java PathFinder. jFuzz is intended to be a research testbed for investigating new testing and analysis techniques based on concrete and symbolic execution. The source code of jFuzz is available as part of the NASA Java PathFinder.

Java and Mac OS X

CERN Document Server

Davis, T Gene

2010-01-01

Learn the guidelines of integrating Java with native Mac OS X applications with this Devloper Reference book. Java is used to create nearly every type of application that exists and is one of the most required skills of employers seeking computer programmers. Java code and its libraries can be integrated with Mac OS X features, and this book shows you how to do just that. You'll learn to write Java programs on OS X and you'll even discover how to integrate them with the Cocoa APIs.: Shows how Java programs can be integrated with any Mac OS X feature, such as NSView widgets or screen savers; Re

JavaScript Cookbook

CERN Document Server

Powers, Shelley

2010-01-01

Why reinvent the wheel every time you run into a problem with JavaScript? This cookbook is chock-full of code recipes that address common programming tasks, as well as techniques for building web apps that work in any browser. Just copy and paste the code samples into your project -- you'll get the job done faster and learn more about JavaScript in the process. You'll also learn how to take advantage of the latest features in ECMAScript 5 and HTML5, including the new cross-domain widget communication technique, HTML5's video and audio elements, and the drawing canvas. You'll find recipes for

Efficient implementation of real-time programs under the VAX/VMS operating system

Science.gov (United States)

Johnson, S. C.

1985-01-01

Techniques for writing efficient real-time programs under the VAX/VMS oprating system are presented. Basic operations are presented for executing at real-time priority and for avoiding needlless processing delays. A highly efficient technique for accessing physical devices by mapping to the input/output space and accessing the device registrs directly is described. To illustrate the application of the technique, examples are included of different uses of the technique on three devices in the Langley Avionics Integration Research Lab (AIRLAB): the KW11-K dual programmable real-time clock, the Parallel Communications Link (PCL11-B) communication system, and the Datacom Synchronization Network. Timing data are included to demonstrate the performance improvements realized with these applications of the technique.

Progress in using real-time GPS for seismic monitoring of the Cascadia megathrust

Science.gov (United States)

Szeliga, W. M.; Melbourne, T. I.; Santillan, V. M.; Scrivner, C.; Webb, F.

2014-12-01

We report on progress in our development of a comprehensive real-time GPS-based seismic monitoring system for the Cascadia subduction zone. This system is based on 1 Hz point position estimates computed in the ITRF08 reference frame. Convergence from phase and range observables to point position estimates is accelerated using a Kalman filter based, on-line stream editor. Positions are estimated using a short-arc approach and algorithms from JPL's GIPSY-OASIS software with satellite clock and orbit products from the International GNSS Service (IGS). The resulting positions show typical RMS scatter of 2.5 cm in the horizontal and 5 cm in the vertical with latencies below 2 seconds. To facilitate the use of these point position streams for applications such as seismic monitoring, we broadcast real-time positions and covariances using custom-built streaming software. This software is capable of buffering 24-hour streams for hundreds of stations and providing them through a REST-ful web interface. To demonstrate the power of this approach, we have developed a Java-based front-end that provides a real-time visual display of time-series, vector displacement, and contoured peak ground displacement. We have also implemented continuous estimation of finite fault slip along the Cascadia megathrust using an NIF approach. The resulting continuous slip distributions are combined with pre-computed tsunami Green's functions to generate real-time tsunami run-up estimates for the entire Cascadia coastal margin. This Java-based front-end is available for download through the PANGA website. We currently analyze 80 PBO and PANGA stations along the Cascadia margin and are gearing up to process all 400+ real-time stations operating in the Pacific Northwest, many of which are currently telemetered in real-time to CWU. These will serve as milestones towards our over-arching goal of extending our processing to include all of the available real-time streams from the Pacific rim. In addition

Hardware Support for Safety-critical Java Scope Checks

DEFF Research Database (Denmark)

Rios Rivas, Juan Ricardo; Schoeberl, Martin

2012-01-01

Memory management in Safety-Critical Java (SCJ) is based on time bounded, non garbage collected scoped memory regions used to store temporary objects. Scoped memory regions may have different life times during the execution of a program and hence, to avoid leaving dangling pointers, it is necessary...... in terms of execution time for applications where cross-scope references are frequent. Our proposal was implemented and tested on the Java Optimized Processor (JOP)....

JavaScript Web Applications

CERN Document Server

MacCaw, Alex

2011-01-01

Building rich JavaScript applications that bring a desktop experience to the Web requires moving state from the server to the client side-not a simple task. This hands-on book takes proficient JavaScript developers through all the steps necessary to create state-of-the-art applications, including structure, templating, frameworks, communicating with the server, and many other issues. Throughout the book, you'll work with real-world example applications to help you grasp the concepts involved. Learn how to create JavaScript applications that offer a more responsive and improved experience. U

Essential Java for Scientists and Engineers

CERN Document Server

Hahn, Brian D; Malan, Katherine M

2003-01-01

Essential Java serves as an introduction to the programming language, Java, for scientists and engineers, and can also be used by experienced programmers wishing to learn Java as an additional language. The book focuses on how Java, and object-oriented programming, can be used to solve science and engineering problems. Many examples are included from a number of different scientific and engineering areas, as well as from business and everyday life. Pre-written packages of code are provided to help in such areas as input/output, matrix manipulation and scientific graphing. Java source code and

Verification of Java Programs using Symbolic Execution and Invariant Generation

Science.gov (United States)

Pasareanu, Corina; Visser, Willem

2004-01-01

Software verification is recognized as an important and difficult problem. We present a norel framework, based on symbolic execution, for the automated verification of software. The framework uses annotations in the form of method specifications an3 loop invariants. We present a novel iterative technique that uses invariant strengthening and approximation for discovering these loop invariants automatically. The technique handles different types of data (e.g. boolean and numeric constraints, dynamically allocated structures and arrays) and it allows for checking universally quantified formulas. Our framework is built on top of the Java PathFinder model checking toolset and it was used for the verification of several non-trivial Java programs.

Benchmarking JavaScript Frameworks

OpenAIRE

Mariano, Carl Lawrence

2017-01-01

JavaScript programming language has been in existence for many years already and is one of the most widely known, if not, the most used front-end programming language in web development. However, JavaScript is still evolving and with the emergence of JavaScript Frameworks (JSF), there has been a major change in how developers develop software nowadays. Developers these days often use more than one framework in order to fulfil their job which has given rise to the problem for developers when i...

A pedagogic JavaScript program for point location strategies

KAUST Repository

de Castro, Pedro; Devillers, Olivier

2011-01-01

Point location in triangulations is a classical problem in computational geometry. And walking in a triangulation is often used as the starting point for several nice point location strategies. We present a pedagogic JavaScript program demonstrating some of these strategies, which is available at: www-sop.inria.fr/geometrica/demo/point location strategies/.

Estimating radiological consequences using the Java programming language

International Nuclear Information System (INIS)

Crawford, J.; Hayward, M.; Harris, F.; Domel, R.

1998-01-01

At the Australian Nuclear Science and Technology Organisation (ANSTO) a model is being developed to determine critical parameters affecting radioactive doses to humans following a release of radionuclides into the atmosphere. Java programming language was chosen because of the Graphical User Interface (GUI) capabilities and its portability across computer platforms, which were a requirement for the application, called RadCon. The mathematical models are applied over the 2D region, performing time varying calculations of dose to humans for each grid point, according to user selected options. The information combined includes: two dimensional time varying air and ground concentrations, transfer factors from soil to plant, plant to animal, plant to humans, plant interception factors to determine amount of radionuclide on plant surfaces, dosimetric data, such as dose conversion factors and user defined parameters, e.g. soil types, lifestyle, diet of animals and humans. Details of the software requirements, pathway parameters and implementation of RadCon are given

Estimating radiological consequences using the Java programming language

Energy Technology Data Exchange (ETDEWEB)

Crawford, J.; Hayward, M. [Australian Nuclear Science and Technology Organisation (ANSTO), Lucas Heights, NSW (Australia). Information Management Div; Harris, F.; Domel, R. [Australian Nuclear Science and Technology Organisation (ANSTO), Lucas Heights, NSW (Australia). Safety Div.

1998-12-31

At the Australian Nuclear Science and Technology Organisation (ANSTO) a model is being developed to determine critical parameters affecting radioactive doses to humans following a release of radionuclides into the atmosphere. Java programming language was chosen because of the Graphical User Interface (GUI) capabilities and its portability across computer platforms, which were a requirement for the application, called RadCon. The mathematical models are applied over the 2D region, performing time varying calculations of dose to humans for each grid point, according to user selected options. The information combined includes: two dimensional time varying air and ground concentrations, transfer factors from soil to plant, plant to animal, plant to humans, plant interception factors to determine amount of radionuclide on plant surfaces, dosimetric data, such as dose conversion factors and user defined parameters, e.g. soil types, lifestyle, diet of animals and humans. Details of the software requirements, pathway parameters and implementation of RadCon are given 10 refs., 2 tabs., 4 figs.

Java RMI

CERN Document Server

Grosso, William

2002-01-01

Java RMI contains a wealth of experience in designing and implementing Java's Remote Method Invocation. If you're a novice reader, you will quickly be brought up to speed on why RMI is such a powerful yet easy to use tool for distributed programming, while experts can gain valuable experience for constructing their own enterprise and distributed systems. With Java RMI, you'll learn tips and tricks for making your RMI code excel. The book also provides strategies for working with serialization, threading, the RMI registry, sockets and socket factories, activation, dynamic class downloading,

Introduction to Graphics Programming in Java

DEFF Research Database (Denmark)

Rosendahl, Mads

Writing graphics applications in Java using Swing can be quite a daunting experience which requires understanding of some large libraries, and fairly advanced aspects of Java. In these notes we will show that by using a small subset of the Swing package we can write a write range of graphics...

Assessing Students' Structured Programming Skills with Java: The "Blue, Berry, and Blueberry" Assignment

Science.gov (United States)

Zhang, Xihui

2010-01-01

Java is an object-oriented programming language. From a software engineering perspective, object-oriented design and programming is used at the architectural design, and structured design and programming is used at the detailed design within methods. As such, structured programming skills are fundamental to more advanced object-oriented…

AVal: an Extensible Attribute-Oriented Programming Validator for Java

OpenAIRE

Noguera , Carlos; Pawlak , Renaud

2007-01-01

International audience; Attribute Oriented Programming (@OP ) permits programmers to extend the semantics of a base program by annotating it with attributes that are related to a set of concerns. Examples of this are applications that rely on XDoclet (such as Hibernate) or, with the release of Java5's annotations, EJB3. The set of attributes that implements a concern defines a Domain Specific Language, and as such, imposes syntactic and semantic rules on the way that attributes are included i...

Sound Control-Flow Graph Extraction for Java Programs with Exceptions

NARCIS (Netherlands)

Amighi, A.; de Carvalho Gomes, Pedro; Gurov, Dilian; Huisman, Marieke; Eleftherakis, George; Hinchey, Mike; Holcombe, Mike

2012-01-01

We present an algorithm to extract control-flow graphs from Java bytecode, considering exceptional flows. We then establish its correctness: the behavior of the extracted graphs is shown to be a sound over-approximation of the behavior of the original programs. Thus, any temporal safety property

Provably Correct Control-Flow Graphs from Java Programs with Exceptions

NARCIS (Netherlands)

Amighi, A.; de Carvalho Gomes, Pedro; Huisman, Marieke

2011-01-01

We present an algorithm to extract flow graphs from Java bytecode, focusing on exceptional control flows. We prove its correctness, meaning that the behaviour of the extracted control-flow graph is an over-approximation of the behaviour of the original program. Thus any safety property that holds

Java The Good Parts

CERN Document Server

Waldo, Jim

2010-01-01

What if you could condense Java down to its very best features and build better applications with that simpler version? In this book, veteran Sun Labs engineer Jim Waldo reveals which parts of Java are most useful, and why those features make Java among the best programming languages available. Every language eventually builds up crud, Java included. The core language has become increasingly large and complex, and the libraries associated with it have grown even more. Learn how to take advantage of Java's best features by working with an example application throughout the book. You may not l

LabVIEW Real-Time

CERN Multimedia

CERN. Geneva; Flockhart, Ronald Bruce; Seppey, P

2003-01-01

With LabVIEW Real-Time, you can choose from a variety of RT Series hardware. Add a real-time data acquisition component into a larger measurement and automation system or create a single stand-alone real-time solution with data acquisition, signal conditioning, motion control, RS-232, GPIB instrumentation, and Ethernet connectivity. With the various hardware options, you can create a system to meet your precise needs today, while the modularity of the system means you can add to the solution as your system requirements grow. If you are interested in Reliable and Deterministic systems for Measurement and Automation, you will profit from this seminar. Agenda: Real-Time Overview LabVIEW RT Hardware Platforms - Linux on PXI Programming with LabVIEW RT Real-Time Operating Systems concepts Timing Applications Data Transfer

Real Time Updating Genetic Network Programming for Adapting to the Change of Stock Prices

Science.gov (United States)

Chen, Yan; Mabu, Shingo; Shimada, Kaoru; Hirasawa, Kotaro

The key in stock trading model is to take the right actions for trading at the right time, primarily based on the accurate forecast of future stock trends. Since an effective trading with given information of stock prices needs an intelligent strategy for the decision making, we applied Genetic Network Programming (GNP) to creating a stock trading model. In this paper, we propose a new method called Real Time Updating Genetic Network Programming (RTU-GNP) for adapting to the change of stock prices. There are three important points in this paper: First, the RTU-GNP method makes a stock trading decision considering both the recommendable information of technical indices and the candlestick charts according to the real time stock prices. Second, we combine RTU-GNP with a Sarsa learning algorithm to create the programs efficiently. Also, sub-nodes are introduced in each judgment and processing node to determine appropriate actions (buying/selling) and to select appropriate stock price information depending on the situation. Third, a Real Time Updating system has been firstly introduced in our paper considering the change of the trend of stock prices. The experimental results on the Japanese stock market show that the trading model with the proposed RTU-GNP method outperforms other models without real time updating. We also compared the experimental results using the proposed method with Buy&Hold method to confirm its effectiveness, and it is clarified that the proposed trading model can obtain much higher profits than Buy&Hold method.

JavaScript for Absolute Beginners

CERN Document Server

McNavage, T

2010-01-01

If you are new to both JavaScript and programming, this hands-on book is for you. Rather than staring blankly at gobbledygook, you'll explore JavaScript by entering and running hundreds of code samples in Firebug, a free JavaScript debugger. Then in the last two chapters, you'll leave the safety of Firebug and hand-code an uber cool JavaScript application in your preferred text editor. Written in a friendly, engaging narrative style, this innovative JavaScript tutorial covers the following essentials: * Core JavaScript syntax, such as value types, operators, expressions, and statements provide

Tool-supported Refactoring for JavaScript

DEFF Research Database (Denmark)

Feldthaus, Asger; Millstein, Todd; Møller, Anders

2011-01-01

Script because of its dynamic nature. We propose a framework for specifying and implementing JavaScript refactorings based on pointer analysis. We describe novel refactorings motivated by best practice recommendations for JavaScript programming, and demonstrate how they can be described concisely in terms...... of queries provided by our framework. Experiments performed with a prototype implementation on a suite of existing applications show that our approach is well-suited for developing practical refactoring tools for JavaScript.......Refactoring is a popular technique for improving the structure of existing programs while maintaining their behavior. For statically typed programming languages such as Java, a wide variety of refactorings have been described, and tool support for performing refactorings and ensuring...

Bringing Interactivity to the Web: The JAVA Solution.

Science.gov (United States)

Knee, Richard H.; Cafolla, Ralph

Java is an object-oriented programming language of the Internet. It's popularity lies in its ability to create interactive Web sites across platforms. The most common Java programs are applications and applets, which adhere to a set of conventions that lets them run within a Java-compatible browser. Java is becoming an essential subject matter and…

Reusable libraries for safety-critical Java

DEFF Research Database (Denmark)

Rios Rivas, Juan Ricardo; Schoeberl, Martin

2014-01-01

The large collection of Java class libraries is a main factor of the success of Java. However, these libraries assume that a garbage-collected heap is used. Safety-critical Java uses scope-based memory areas instead of a garbage-collected heap. Therefore, the Java class libraries are problematic...... to use in safety-critical Java. We have identified common programming patterns in the Java class libraries that make them unsuitable for safety-critical Java. We propose ways to improve the libraries to avoid the impact of the identified problematic patterns. We illustrate these changes by implementing...

ISTTOK real-time architecture

Energy Technology Data Exchange (ETDEWEB)

Carvalho, Ivo S., E-mail: ivoc@ipfn.ist.utl.pt; Duarte, Paulo; Fernandes, Horácio; Valcárcel, Daniel F.; Carvalho, Pedro J.; Silva, Carlos; Duarte, André S.; Neto, André; Sousa, Jorge; Batista, António J.N.; Hekkert, Tiago; Carvalho, Bernardo B.

2014-03-15

Highlights: • All real-time diagnostics and actuators were integrated in the same control platform. • A 100 μs control cycle was achieved under the MARTe framework. • Time-windows based control with several event-driven control strategies implemented. • AC discharges with exception handling on iron core flux saturation. • An HTML discharge configuration was developed for configuring the MARTe system. - Abstract: The ISTTOK tokamak was upgraded with a plasma control system based on the Advanced Telecommunications Computing Architecture (ATCA) standard. This control system was designed to improve the discharge stability and to extend the operational space to the alternate plasma current (AC) discharges as part of the ISTTOK scientific program. In order to accomplish these objectives all ISTTOK diagnostics and actuators relevant for real-time operation were integrated in the control system. The control system was programmed in C++ over the Multi-threaded Application Real-Time executor (MARTe) which provides, among other features, a real-time scheduler, an interrupt handler, an intercommunications interface between code blocks and a clearly bounded interface with the external devices. As a complement to the MARTe framework, the BaseLib2 library provides the foundations for the data, code introspection and also a Hypertext Transfer Protocol (HTTP) server service. Taking advantage of the modular nature of MARTe, the algorithms of each diagnostic data processing, discharge timing, context switch, control and actuators output reference generation, run on well-defined blocks of code named Generic Application Module (GAM). This approach allows reusability of the code, simplified simulation, replacement or editing without changing the remaining GAMs. The ISTTOK control system GAMs run sequentially each 100 μs cycle on an Intel{sup ®} Q8200 4-core processor running at 2.33 GHz located in the ATCA crate. Two boards (inside the ATCA crate) with 32 analog

ISTTOK real-time architecture

International Nuclear Information System (INIS)

Carvalho, Ivo S.; Duarte, Paulo; Fernandes, Horácio; Valcárcel, Daniel F.; Carvalho, Pedro J.; Silva, Carlos; Duarte, André S.; Neto, André; Sousa, Jorge; Batista, António J.N.; Hekkert, Tiago; Carvalho, Bernardo B.

2014-01-01

Highlights: • All real-time diagnostics and actuators were integrated in the same control platform. • A 100 μs control cycle was achieved under the MARTe framework. • Time-windows based control with several event-driven control strategies implemented. • AC discharges with exception handling on iron core flux saturation. • An HTML discharge configuration was developed for configuring the MARTe system. - Abstract: The ISTTOK tokamak was upgraded with a plasma control system based on the Advanced Telecommunications Computing Architecture (ATCA) standard. This control system was designed to improve the discharge stability and to extend the operational space to the alternate plasma current (AC) discharges as part of the ISTTOK scientific program. In order to accomplish these objectives all ISTTOK diagnostics and actuators relevant for real-time operation were integrated in the control system. The control system was programmed in C++ over the Multi-threaded Application Real-Time executor (MARTe) which provides, among other features, a real-time scheduler, an interrupt handler, an intercommunications interface between code blocks and a clearly bounded interface with the external devices. As a complement to the MARTe framework, the BaseLib2 library provides the foundations for the data, code introspection and also a Hypertext Transfer Protocol (HTTP) server service. Taking advantage of the modular nature of MARTe, the algorithms of each diagnostic data processing, discharge timing, context switch, control and actuators output reference generation, run on well-defined blocks of code named Generic Application Module (GAM). This approach allows reusability of the code, simplified simulation, replacement or editing without changing the remaining GAMs. The ISTTOK control system GAMs run sequentially each 100 μs cycle on an Intel ® Q8200 4-core processor running at 2.33 GHz located in the ATCA crate. Two boards (inside the ATCA crate) with 32 analog

Transforming process models : executable rewrite rules versus a formalized Java program

NARCIS (Netherlands)

Van Gorp, P.M.E.; Eshuis, H.; Petriu, D.C.; Rouquette, N.

2010-01-01

In the business process management community, transformations for process models are usually programmed using imperative languages (such as Java). The underlying mapping rules tend to be documented using informal visual rules whereas they tend to be formalized using mathematical set constructs. In

Static Analysis for JavaScript

DEFF Research Database (Denmark)

Jensen, Simon Holm

. This dissertation describes the design and implementation of a static analysis for JavaScript that can assist programmers in finding bugs in code during development. We describe the design of a static analysis tool for JavaScript, built using the monotone framework. This analysis infers detailed type information......Web applications present unique challenges to designers of static analysis tools. One of these challenges is the language JavaScript used for client side scripting in the browser. JavaScript is a complex language with many pitfalls and poor tool support compared to other languages...... about programs. This information can be used to detect bugs such as null pointer dereferences and unintended type coercions. The analysis is sound, enabling it to prove the absence of certain program errors. JavaScript is usually run within the context of the browser and the DOM API. The major...

THE NATURE, THE BEAUTY AND THE DIFFICULTY IN JAVA PROGRAMMING

Directory of Open Access Journals (Sweden)

Dror BENAMI

2016-12-01

Full Text Available JAVA language in recent years is widely used for the reason that integrates multiple information technologies. JAVA benefits are not fully exploited. The article discusses some aspects of the design of Data Mining algorithms in Java.JAVA: NATURA, FRUMUSEŢEA ŞI DIFICULTĂTILE PROGRAMĂRIILimbajul JAVA în ultimii ani se utilizează pe scară largă dat fiind că integrează mai multe tehnologii informaţionale. Avantajele JAVA nu sunt pe deplin exploatate. În articol sunt discutate unele aspecte de proiectare a algoritmilor de Data Mining în limbajul JAVA.

Multi-Layer Real-Time Support for JVM-based Smart Phone Systems

Directory of Open Access Journals (Sweden)

SEO, E.

2013-08-01

Full Text Available Employing the Java virtual machine (JVM architecture provides smart phone systems stability and security by sandboxing third-party applications and controlling their behavior. However, the JVM layer hinders applications from notifying the operating system scheduler about their timeliness requirements; therefore, applications sometimes fail to respond on time. In order to improve the responsiveness of smart phone applications, this paper proposes two schemes. First, for existing applications that cannot be rebuilt, we modify the kernel scheduler to value task priorities over fairness. Second, we propose cross-layer real-time support APIs to deliver applications' priorities to the kernel scheduler, which will help developers to add real-time scheduling support to their applications. Our prototype demonstrates that the suggested schemes dramatically improve response times and throughputs of prioritized applications.

Object oriented JavaScript

CERN Document Server

Stefanov, Stoyan

2013-01-01

You will first be introduced to object-oriented programming, then to the basics of objects in JavaScript. This book takes a do-it-yourself approach when it comes to writing code, because the best way to really learn a programming language is by writing code. You are encouraged to type code into Firebug's console, see how it works and then tweak it and play around with it. There are practice questions at the end of each chapter to help you review what you have learned.For new to intermediate JavaScript developer who wants to prepare themselves for web development problems solved by smart JavaSc

Towards provably correct code generation for a hard real-time programming language

DEFF Research Database (Denmark)

Fränzle, Martin; Müller-Olm, Markus

1994-01-01

This paper sketches a hard real-time programming language featuring operators for expressing timeliness requirements in an abstract, implementation-independent way and presents parts of the design and verification of a provably correct code generator for that language. The notion of implementation...

Development of Remote Inspection Systems with the Java Applet

International Nuclear Information System (INIS)

Choi, Yoo Rark; Lee, Jae Cheol; Kim, Jae Hee

2005-01-01

The world wide web and java are powerful networking technologies on the internet. An applet is a program written in the java programming language that can be included in an HTML page, much in the same way as an image is included. When we use a Java technology-enabled browser to view a page that contains an applet, the applet code is transferred to a client's system and executed by the browser's Java Virtual Machine (JVM). We have developed two remote inspection systems for a reactor wall inspection and guide tube spilt pin inspection based on the java and traditional programming language. The java is used on a GUI(graphic user interface) and the traditional visual C++ programming language is used to control the inspection equipments

Representational State Transfer a its support in programming language Java

OpenAIRE

Tran, Dac Ngoc Lam

2010-01-01

This bachelor thesis focuses on explaining the term Representational State Transfer (REST) and its usage in the programming language Java. The first chapter introduces readers with the theoretical basis of REST, its presence in HTTP protocol and its pros and cons in general. The second chapter is dedicated to the application of principles mentioned in the first chapter. On two different programs, a client and a server, I go through the analysis and programming the REST layer. After this chapt...

Test of user- and system programs coded in real time languages - requirements on program language and testing tool

International Nuclear Information System (INIS)

Hertlin, J.; Mackert, M.

1979-01-01

In the present paper the functions are presented, which should be part of a test system for user programs in a higher treat time programming language, taking into account time sequences and competitive processes. As can be shown by the problem of testing, use of higher level real time programming languages renders the task of program development essentially easier, however performance of test procedures without appropriate test systems is very difficult. After the presentation of notions and methods for the testing of programs, general requirements on testing tools are described and the test system functions for a program test, beeing uncritical with respect to time, are placed together. Thereby, for every individual function, the interface between the test system, the program under test, and the residual program-generation system (compiler, binder, operating system, delay-time system, and loader) is given too. For the time-critical test, a series of desirable functions are described, which can be implemented with acceptable expense. (orig.) [de

JavaScript The Definitive Guide

CERN Document Server

Flanagan, David

2011-01-01

Since 1996, JavaScript: The Definitive Guide has been the bible for JavaScript programmers-a programmer's guide and comprehensive reference to the core language and to the client-side JavaScript APIs defined by web browsers. The 6th edition covers HTML5 and ECMAScript 5. Many chapters have been completely rewritten to bring them in line with today's best web development practices. New chapters in this edition document jQuery and server side JavaScript. It's recommended for experienced programmers who want to learn the programming language of the Web, and for current JavaScript programmers wh

Development of Remote Inspection Systems with the Java Applet

Energy Technology Data Exchange (ETDEWEB)

Choi, Yoo Rark; Lee, Jae Cheol; Kim, Jae Hee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2005-07-01

The world wide web and java are powerful networking technologies on the internet. An applet is a program written in the java programming language that can be included in an HTML page, much in the same way as an image is included. When we use a Java technology-enabled browser to view a page that contains an applet, the applet code is transferred to a client's system and executed by the browser's Java Virtual Machine (JVM). We have developed two remote inspection systems for a reactor wall inspection and guide tube spilt pin inspection based on the java and traditional programming language. The java is used on a GUI(graphic user interface) and the traditional visual C++ programming language is used to control the inspection equipments.

CLEAN RIVER PROGRAM AT KALIGARANG CENTRAL JAVA PROVINCE

Directory of Open Access Journals (Sweden)

Harihanto Harihanto

2006-11-01

Full Text Available Kaligarang River that located n Central Java Province represents one of the rivers in Indonesia which water quality was proved very bad. Since 1989 Clean River Program has been executed in this river. Nevertheless, untul 1998 there have not yet independent evaluation towards this program. To Know wether of this program successful a survey has been conducted from November 1998 to November 1999. The success of this program investigated by: (1 reducing of pollutant loads, (2 target of pollution loads that reached, and (3 improving of river water quality. It was foujd that this program has been successfully reducing pollutant loads of waste of all factories as target froups. Nevertheless, the quality of water of Kaligarang River was still relatively bad. This condition porbably was cause by domestic waste partivularly from hospital, hotel, restaurant dan small factories that was not included as tartet group in this program. Thus it was conclude at the implementation of the Clean River Program in Kaligarang has not been succesful to im[rove water quality of this river.

Spying on real-time computers to improve performance

International Nuclear Information System (INIS)

Taff, L.M.

1975-01-01

The sampled program-counter histogram, an established technique for shortening the execution times of programs, is described for a real-time computer. The use of a real-time clock allows particularly easy implementation. (Auth.)

Real-time flood monitoring and warning system

Directory of Open Access Journals (Sweden)

Jirapon Sunkpho

2011-04-01

Full Text Available Flooding is one of the major disasters occurring in various parts of the world. The system for real-time monitoring ofwater conditions: water level; flow; and precipitation level, was developed to be employed in monitoring flood in Nakhon SiThammarat, a southern province in Thailand. The two main objectives of the developed system is to serve 1 as informationchannel for flooding between the involved authorities and experts to enhance their responsibilities and collaboration and2 as a web based information source for the public, responding to their need for information on water condition and flooding.The developed system is composed of three major components: sensor network, processing/transmission unit, and database/application server. These real-time data of water condition can be monitored remotely by utilizing wireless sensors networkthat utilizes the mobile General Packet Radio Service (GPRS communication in order to transmit measured data to theapplication server. We implemented a so-called VirtualCOM, a middleware that enables application server to communicatewith the remote sensors connected to a GPRS data unit (GDU. With VirtualCOM, a GDU behaves as if it is a cable directlyconnected the remote sensors to the application server. The application server is a web-based system implemented usingPHP and JAVA as the web application and MySQL as its relational database. Users can view real-time water conditionas well as the forecasting of the water condition directly from the web via web browser or via WAP. The developed systemhas demonstrated the applicability of today’s sensors in wirelessly monitor real-time water conditions.

Getting started with HTML5 WebSocket programming

CERN Document Server

Pterneas, Vangos

2013-01-01

Getting Started with HTML5 Websocket Programming takes a tutorial-based approach.This book is for anyone who wants to build high-performance, true, real-time web applications. Being familiar with frontend web development (HTML / XHTML, JavaScript) would be ideal.

Graph Transforming Java Data

NARCIS (Netherlands)

de Mol, M.J.; Rensink, Arend; Hunt, James J.

This paper introduces an approach for adding graph transformation-based functionality to existing JAVA programs. The approach relies on a set of annotations to identify the intended graph structure, as well as on user methods to manipulate that structure, within the user’s own JAVA class

Java Decaffeinated: experiences building a programming language from components

OpenAIRE

Farragher, Linda; Dobson, Simon

2000-01-01

non-peer-reviewed Most modern programming languages are complex and feature rich. Whilst this is (sometimes) an advantage for industrial-strength applications, it complicates both language teaching and language research. We describe our experiences in the design of a reduced sub-set of the Java language and its implementation using the Vanilla language development framework. We argue that Vanilla???s component-based approach allows the language???s feature set to be varied quickly and simp...

Java for dummies quick reference

CERN Document Server

Lowe, Doug

2012-01-01

A reference that answers your questions as you move through your coding The demand for Android programming and web apps continues to grow at an unprecedented pace and Java is the preferred language for both. Java For Dummies Quick Reference keeps you moving through your coding while you solve a problem, look up a command or syntax, or search for a programming tip. Whether you're a Java newbie or a seasoned user, this fast reference offers you quick access to solutions without requiring that you wade through pages of tutorial material. Leverages the true reference format that is organized with

RxJava essentials

CERN Document Server

Morgillo, Ivan

2015-01-01

If you are an experienced Java developer, reactive programming will give you a new way to approach scalability and concurrency in your backend systems, without forcing you to switch programming languages.

Tatool: a Java-based open-source programming framework for psychological studies.

Science.gov (United States)

von Bastian, Claudia C; Locher, André; Ruflin, Michael

2013-03-01

Tatool (Training and Testing Tool) was developed to assist researchers with programming training software, experiments, and questionnaires. Tatool is Java-based, and thus is a platform-independent and object-oriented framework. The architecture was designed to meet the requirements of experimental designs and provides a large number of predefined functions that are useful in psychological studies. Tatool comprises features crucial for training studies (e.g., configurable training schedules, adaptive training algorithms, and individual training statistics) and allows for running studies online via Java Web Start. The accompanying "Tatool Online" platform provides the possibility to manage studies and participants' data easily with a Web-based interface. Tatool is published open source under the GNU Lesser General Public License, and is available at www.tatool.ch.

Scientific Programming Using Java and C: A Remote Sensing Example

Science.gov (United States)

Prados, Donald; Johnson, Michael; Mohamed, Mohamed A.; Cao, Chang-Yong; Gasser, Jerry; Powell, Don; McGregor, Lloyd

1999-01-01

This paper presents results of a project to port code for processing remotely sensed data from the UNIX environment to Windows. Factors considered during this process include time schedule, cost, resource availability, reuse of existing code, rapid interface development, ease of integration, and platform independence. The approach selected for this project used both Java and C. By using Java for the graphical user interface and C for the domain model, the strengths of both languages were utilized and the resulting code can easily be ported to other platforms. The advantages of this approach are discussed in this paper.

Isolating and Restricting Client-Side JavaScript:Isoleren en beperken van JavaScript aan de cliëntzijde

OpenAIRE

Van Acker, Steven

2015-01-01

In today’s web applications, no one disputes the important role of JavaScript asa client-side programming language. JavaScript can turn the Web into a lively,dynamic and interactive end-user experience. Unfortunately, JavaScript canalso be used to steal sensitive information and abuse powerful functionality. Sloppy input validation can make a web application vulnerable, allowingmalicious JavaScript code to leak into a web application’s JavaScript executionenvironment, where it leads to un...

Programmed Instruction for Teaching Java: Consideration of Learn Unit Frequency and Rule-Test Performance

Science.gov (United States)

Emurian, Henry H.

2007-01-01

At the beginning of a Java computer programming course, nine students in an undergraduate class and nine students in a graduate class completed a web-based programmed instruction tutoring system that taught a simple computer program. All students exited the tutor with an identical level of skill, at least as determined by the tutor's required…

Enhancements and Evolution of the Real Time Mission Monitor

Science.gov (United States)

Goodman, M.; Blakeslee, R.; Hardin, D.; Hall, J.; He, Y.; Regner, K.

2008-12-01

The Real Time Mission Monitor (RTMM) is a visualization and information system that fuses multiple Earth science data sources, to enable real time decision-making for airborne and ground validation experiments. Developed at the National Aeronautics and Space Administration (NASA) Marshall Space Flight Center, RTMM is a situational awareness, decision-support system that integrates satellite imagery, radar, surface and airborne instrument data sets, model output parameters, lightning location observations, aircraft navigation data, soundings, and other applicable Earth science data sets. The integration and delivery of this information is made possible using data acquisition systems, network communication links, network server resources, and visualizations through the Google Earth virtual earth application. RTMM has proven extremely valuable for optimizing individual Earth science airborne field experiments. Flight planners, mission scientists, instrument scientists and program managers alike appreciate the contributions that RTMM makes to their flight projects. RTMM has received numerous plaudits from a wide variety of scientists who used RTMM during recent field campaigns including the 2006 NASA African Monsoon Multidisciplinary Analyses (NAMMA), 2007 Tropical Composition, Cloud, and Climate Coupling (TC4), 2008 Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS) missions, the 2007-2008 NOAA-NASA Aerosonde Hurricane flights and the 2008 Soil Moisture Active-Passive Validation Experiment (SMAP-VEX). Improving and evolving RTMM is a continuous process. RTMM recently integrated the Waypoint Planning Tool, a Java-based application that enables aircraft mission scientists to easily develop a pre-mission flight plan through an interactive point-and-click interface. Individual flight legs are automatically calculated for altitude, latitude, longitude, flight leg distance, cumulative distance, flight leg time, cumulative time, and

Interactive Web Services with Java

DEFF Research Database (Denmark)

Møller, Anders; Schwartzbach, Michael Ignatieff

This slide collection about Java Web service programming, JSP, Servlets and JWIG is created by: Anders Møller and Michael I. Schwartzbach at the BRICS research center at University of Aarhus, Denmark.......This slide collection about Java Web service programming, JSP, Servlets and JWIG is created by: Anders Møller and Michael I. Schwartzbach at the BRICS research center at University of Aarhus, Denmark....

Java Card for PayTv Application

OpenAIRE

Dutta, Pallab

2013-01-01

Smart cards are widely used along with PayTV receivers to store secret user keys and to perform security functions to prevent any unauthorized viewing of PayTV channels. Java Card technology enables programs written in the Java programming language to run on smart cards. Smart cards represent one of the smallest computing platforms in use today. The memory configuration of a smart card are of the order of 4K of RAM, 72K of EEPROM, and 24K of ROM. Using Java card provides advantages to the ind...

Runtime Support for Type-Safe Dynamic Java Classes

National Research Council Canada - National Science Library

Malabarba, Scott; Pandey, Raju; Gragg, Jeff; Barr, Earl; Barnes, J. F

2000-01-01

.... In this paper we present an approach for supporting dynamic evolution of Java programs. In this approach, Java programs can evolve by changing their components, namely classes, during their execution...

Building flexible real-time systems using the Flex language

Science.gov (United States)

Kenny, Kevin B.; Lin, Kwei-Jay

1991-01-01

The design and implementation of a real-time programming language called Flex, which is a derivative of C++, are presented. It is shown how different types of timing requirements might be expressed and enforced in Flex, how they might be fulfilled in a flexible way using different program models, and how the programming environment can help in making binding and scheduling decisions. The timing constraint primitives in Flex are easy to use yet powerful enough to define both independent and relative timing constraints. Program models like imprecise computation and performance polymorphism can carry out flexible real-time programs. In addition, programmers can use a performance measurement tool that produces statistically correct timing models to predict the expected execution time of a program and to help make binding decisions. A real-time programming environment is also presented.

Some researches on converting a C++ software to java

International Nuclear Information System (INIS)

Ding Yuzheng; Wang Taijie; Dai Guiliang

1997-01-01

Because of Java's flexibility, portability, and relative simplicity, Java programming language has sparked considerable interest among software developers. The author presents the experience on converting a C++ off-line software prototype to Java. Some benefits of Java while converting the C++ prototype to Java and also some limitations of Java are described. Some of these limitations arise from the differences between Java and C++, Others are due to weakness of Java itself. The article also introduces some methods to work around Java's limitations

Multimedia consultation session recording and playback using Java-based browser in global PACS

Science.gov (United States)

Martinez, Ralph; Shah, Pinkesh J.; Yu, Yuan-Pin

1998-07-01

The current version of the Global PACS software system uses a Java-based implementation of the Remote Consultation and Diagnosis (RCD) system. The Java RCD includes a multimedia consultation session between physicians that includes text, static image, image annotation, and audio data. The JAVA RCD allows 2-4 physicians to collaborate on a patient case. It allows physicians to join the session via WWW Java-enabled browsers or stand alone RCD application. The RCD system includes a distributed database archive system for archiving and retrieving patient and session data. The RCD system can be used for store and forward scenarios, case reviews, and interactive RCD multimedia sessions. The RCD system operates over the Internet, telephone lines, or in a private Intranet. A multimedia consultation session can be recorded, and then played back at a later time for review, comments, and education. A session can be played back using Java-enabled WWW browsers on any operating system platform. The JAVA RCD system shows that a case diagnosis can be captured digitally and played back with the original real-time temporal relationships between data streams. In this paper, we describe design and implementation of the RCD session playback.

Real-time vision systems

Energy Technology Data Exchange (ETDEWEB)

Johnson, R.; Hernandez, J.E.; Lu, Shin-yee [Lawrence Livermore National Lab., CA (United States)

1994-11-15

Many industrial and defence applications require an ability to make instantaneous decisions based on sensor input of a time varying process. Such systems are referred to as `real-time systems` because they process and act on data as it occurs in time. When a vision sensor is used in a real-time system, the processing demands can be quite substantial, with typical data rates of 10-20 million samples per second. A real-time Machine Vision Laboratory (MVL) was established in FY94 to extend our years of experience in developing computer vision algorithms to include the development and implementation of real-time vision systems. The laboratory is equipped with a variety of hardware components, including Datacube image acquisition and processing boards, a Sun workstation, and several different types of CCD cameras, including monochrome and color area cameras and analog and digital line-scan cameras. The equipment is reconfigurable for prototyping different applications. This facility has been used to support several programs at LLNL, including O Division`s Peacemaker and Deadeye Projects as well as the CRADA with the U.S. Textile Industry, CAFE (Computer Aided Fabric Inspection). To date, we have successfully demonstrated several real-time applications: bullet tracking, stereo tracking and ranging, and web inspection. This work has been documented in the ongoing development of a real-time software library.

Java problem-based learning

Directory of Open Access Journals (Sweden)

Goran P, Šimić

2012-01-01

Full Text Available The paper describes the self-directed problem-based learning system (PBL named Java PBL. The expert module is the kernel of Java PBL. It involves a specific domain model, a problem generator and a solution generator. The overall system architecture is represented in the paper. Java PBL can act as the stand-alone system, but it is also designed to provide support to learning management systems (LMSs. This is provided by a modular design of the system. An LMS can offer the declarative knowledge only. Java PBL offers the procedural knowledge and the progress of the learner programming skills. The free navigation, unlimited numbers of problems and recommendations represent the main pedagogical strategies and tactics implemented into the system.

Practical Analysis of the Dynamic Characteristics of JavaScript

OpenAIRE

Wei, Shiyi

2015-01-01

JavaScript is a dynamic object-oriented programming language, which is designed with flexible programming mechanisms. JavaScript is widely used in developing sophisticated software systems, especially web applications. Despite of its popularity, there is a lack of software tools that support JavaScript for software engineering clients. Dataflow analysis approximates software behavior by analyzing the program code; it is the foundation for many software tools. However, several unique features...

Java development in MDSplus

International Nuclear Information System (INIS)

Barana, O.; Luchetta, A.; Manduchi, G.; Taliercio, C.

2002-01-01

This paper describes the new Java components of MDSplus. These tools represent the evolution of some MDSplus components (MDSplus Current Developments and Future Directions, this conference) previously written in C, taking advantage from the multiplatform interoperability provided by the Java framework. The use of Java in the development of these tools provided an impressive reduction in the coding and test time. This is mainly due to the large set of ready-to-use components of the Java framework, and to the effective code re-use which can be achieved in the organization of Java applications

Java to C: A Primer

DEFF Research Database (Denmark)

McDowell, Charlie; Villadsen, Jørgen

This book is designed to be used as a quick introduction to C for programmers already familiar with Java. It is not a replacement for a reference book on C but is instead a supplement. For the programmer already familiar with Java, the typical book on C requires the reader to wade through many...... details of already-familiar material. In this book, we quickly present the main concepts needed to begin writing serious programs in C, highlighting the differences between C and Java....

Towards an Existential Types Model for Java with Wildcards

DEFF Research Database (Denmark)

Cameron, Nicholas; Drossopoulou, Sophia; Ernst, Erik

2007-01-01

Wildcards extend Java generics by softening the mismatch between subtype and parametric polymorphism. Although they are a key part of the Java 5.0 programming language, a type system including wildcards has never been proven type sound. Wildcards have previously been formalised as existential types....... In this paper we extend FGJ, a featherweight formalisation of Java with generics, with existential types. We prove that this calculus, ExistsJ, is type sound, and illustrate how it models wildcards in the Java Programming Language. ExistsJ is not a full model for Java wildcards, because it does not support...... lower bounds for wildcards. We discuss why ExistsJ can not be easily extended with lower bounds, and how full Java wildcards could be modelled in a type sound way....

Hierarchical time series bottom-up approach for forecast the export value in Central Java

Science.gov (United States)

Mahkya, D. A.; Ulama, B. S.; Suhartono

2017-10-01

The purpose of this study is Getting the best modeling and predicting the export value of Central Java using a Hierarchical Time Series. The export value is one variable injection in the economy of a country, meaning that if the export value of the country increases, the country’s economy will increase even more. Therefore, it is necessary appropriate modeling to predict the export value especially in Central Java. Export Value in Central Java are grouped into 21 commodities with each commodity has a different pattern. One approach that can be used time series is a hierarchical approach. Hierarchical Time Series is used Buttom-up. To Forecast the individual series at all levels using Autoregressive Integrated Moving Average (ARIMA), Radial Basis Function Neural Network (RBFNN), and Hybrid ARIMA-RBFNN. For the selection of the best models used Symmetric Mean Absolute Percentage Error (sMAPE). Results of the analysis showed that for the Export Value of Central Java, Bottom-up approach with Hybrid ARIMA-RBFNN modeling can be used for long-term predictions. As for the short and medium-term predictions, it can be used a bottom-up approach RBFNN modeling. Overall bottom-up approach with RBFNN modeling give the best result.

A Hardware Abstraction Layer in Java

DEFF Research Database (Denmark)

Schoeberl, Martin; Korsholm, Stephan; Kalibera, Tomas

2011-01-01

Embedded systems use specialized hardware devices to interact with their environment, and since they have to be dependable, it is attractive to use a modern, type-safe programming language like Java to develop programs for them. Standard Java, as a platform-independent language, delegates access...... to devices, direct memory access, and interrupt handling to some underlying operating system or kernel, but in the embedded systems domain resources are scarce and a Java Virtual Machine (JVM) without an underlying middleware is an attractive architecture. The contribution of this article is a proposal...... for Java packages with hardware objects and interrupt handlers that interface to such a JVM. We provide implementations of the proposal directly in hardware, as extensions of standard interpreters, and finally with an operating system middleware. The latter solution is mainly seen as a migration path...

A home monitoring program including real-time wireless home spirometry in idiopathic pulmonary fibrosis: a pilot study on experiences and barriers.

Science.gov (United States)

Moor, C C; Wapenaar, M; Miedema, J R; Geelhoed, J J M; Chandoesing, P P; Wijsenbeek, M S

2018-05-29

In idiopathic pulmonary fibrosis (IPF), home monitoring experiences are limited, not yet real-time available nor implemented in daily care. We evaluated feasibility and potential barriers of a new home monitoring program with real-time wireless home spirometry in IPF. Ten patients with IPF were asked to test this home monitoring program, including daily home spirometry, for four weeks. Measurements of home and hospital spirometry showed good agreement. All patients considered real-time wireless spirometry useful and highly feasible. Both patients and researchers suggested relatively easy solutions for the identified potential barriers regarding real-time home monitoring in IPF.

Smart-Grid Backbone Network Real-Time Delay Reduction via Integer Programming.

Science.gov (United States)

Pagadrai, Sasikanth; Yilmaz, Muhittin; Valluri, Pratyush

2016-08-01

This research investigates an optimal delay-based virtual topology design using integer linear programming (ILP), which is applied to the current backbone networks such as smart-grid real-time communication systems. A network traffic matrix is applied and the corresponding virtual topology problem is solved using the ILP formulations that include a network delay-dependent objective function and lightpath routing, wavelength assignment, wavelength continuity, flow routing, and traffic loss constraints. The proposed optimization approach provides an efficient deterministic integration of intelligent sensing and decision making, and network learning features for superior smart grid operations by adaptively responding the time-varying network traffic data as well as operational constraints to maintain optimal virtual topologies. A representative optical backbone network has been utilized to demonstrate the proposed optimization framework whose simulation results indicate that superior smart-grid network performance can be achieved using commercial networks and integer programming.

Static Schedulers for Embedded Real-Time Systems

Science.gov (United States)

1989-12-01

Because of the need for having efficient scheduling algorithms in large scale real time systems , software engineers put a lot of effort on developing...provide static schedulers for he Embedded Real Time Systems with single processor using Ada programming language. The independent nonpreemptable...support the Computer Aided Rapid Prototyping for Embedded Real Time Systems so that we determine whether the system, as designed, meets the required

JPP: A Java Pre-Processor

OpenAIRE

Kiniry, Joseph R.; Cheong, Elaine

1998-01-01

The Java Pre-Processor, or JPP for short, is a parsing pre-processor for the Java programming language. Unlike its namesake (the C/C++ Pre-Processor, cpp), JPP provides functionality above and beyond simple textual substitution. JPP's capabilities include code beautification, code standard conformance checking, class and interface specification and testing, and documentation generation.

Model checking a cache coherence protocol for a Java DSM implementation

NARCIS (Netherlands)

J. Pang; W.J. Fokkink (Wan); R. Hofman (Rutger); R. Veldema

2007-01-01

textabstractJackal is a fine-grained distributed shared memory implementation of the Java programming language. It aims to implement Java's memory model and allows multithreaded Java programs to run unmodified on a distributed memory system. It employs a multiple-writer cache coherence

Certifiable Java for Embedded Systems

DEFF Research Database (Denmark)

Schoeberl, Martin; Dalsgaard, Andreas Engelbredt; Hansen, Rene Rydhof

2014-01-01

The Certifiable Java for Embedded Systems (CJ4ES) project aimed to develop a prototype development environment and platform for safety-critical software for embedded applications. There are three core constituents: A profile of the Java programming language that is tailored for safety......-critical applications, a predictable Java processor built with FPGA technology, and an Eclipse based application development environment that binds the profile and the platform together and provides analyses that help to provide evidence that can be used as part of a safety case. This paper summarizes key contributions...

Professional BlazeDS Creating Rich Internet Applications with Flex and Java

CERN Document Server

Tiwari, Shashank

2009-01-01

A hands-on guide to creating Rich Internet Applications (RIA) using BlazeDS. BlazeDS enables you to easily connect to back-end distributed data and push data in real time to Adobe Flex and Adobe AIR applications in order to garner more responsive Rich Internet Application (RIA) experiences. It is a scalable option for Flex and Java integration and allows you to create excellent RIAs with both Flex and Java. This informative resource provides you with detailed examples and walkthroughs that explain the best practices for creating RIAs using BlazeDS. You'll begin with the essentials of BlazeDS a

Model checking a cache coherence protocol of a Java DSM implementation

NARCIS (Netherlands)

Pang, J.; Fokkink, W.J.; Hofman, R.; Veldema, R.S.

2007-01-01

Jackal is a fine-grained distributed shared memory implementation of the Java programming language. It aims to implement Java's memory model and allows multithreaded Java programs to run unmodified on a distributed memory system. It employs a multiple-writer cache coherence protocol. In this paper,

Python for teaching introductory programming: A quantitative evaluation

OpenAIRE

Jayal, A; Lauria, S; Tucker, A; Swift, S

2011-01-01

This paper compares two different approaches of teaching introductory programming by quantitatively analysing the student assessments in a real classroom. The first approach is to emphasise the principles of object-oriented programming and design using Java from the very beginning. The second approach is to first teach the basic programming concepts (loops, branch, and use of libraries) using Python and then move on to oriented programming using Java. Each approach was adopted for one academi...

A Real-Time Java Virtual Machine for Avionics (Preprint)

National Research Council Canada - National Science Library

Armbruster, Austin; Pla, Edward; Baker, Jason; Cunei, Antonio; Flack, Chapman; Pizlo, Filip; Vitek, Jan; Proch zka, Marek; Holmes, David

2006-01-01

...) in the DARPA Program Composition for Embedded System (PCES) program. Within the scope of PCES, Purdue University and the Boeing Company collaborated on the development of Ovm, an open source implementation of the RTSJ virtual machine...

Just-in-Time Compilation-Inspired Methodology for Parallelization of Compute Intensive Java Code

Directory of Open Access Journals (Sweden)

GHULAM MUSTAFA

2017-01-01

Full Text Available Compute intensive programs generally consume significant fraction of execution time in a small amount of repetitive code. Such repetitive code is commonly known as hotspot code. We observed that compute intensive hotspots often possess exploitable loop level parallelism. A JIT (Just-in-Time compiler profiles a running program to identify its hotspots. Hotspots are then translated into native code, for efficient execution. Using similar approach, we propose a methodology to identify hotspots and exploit their parallelization potential on multicore systems. Proposed methodology selects and parallelizes each DOALL loop that is either contained in a hotspot method or calls a hotspot method. The methodology could be integrated in front-end of a JIT compiler to parallelize sequential code, just before native translation. However, compilation to native code is out of scope of this work. As a case study, we analyze eighteen JGF (Java Grande Forum benchmarks to determine parallelization potential of hotspots. Eight benchmarks demonstrate a speedup of up to 7.6x on an 8-core system

Just-in-time compilation-inspired methodology for parallelization of compute intensive java code

International Nuclear Information System (INIS)

Mustafa, G.; Ghani, M.U.

2017-01-01

Compute intensive programs generally consume significant fraction of execution time in a small amount of repetitive code. Such repetitive code is commonly known as hotspot code. We observed that compute intensive hotspots often possess exploitable loop level parallelism. A JIT (Just-in-Time) compiler profiles a running program to identify its hotspots. Hotspots are then translated into native code, for efficient execution. Using similar approach, we propose a methodology to identify hotspots and exploit their parallelization potential on multicore systems. Proposed methodology selects and parallelizes each DOALL loop that is either contained in a hotspot method or calls a hotspot method. The methodology could be integrated in front-end of a JIT compiler to parallelize sequential code, just before native translation. However, compilation to native code is out of scope of this work. As a case study, we analyze eighteen JGF (Java Grande Forum) benchmarks to determine parallelization potential of hotspots. Eight benchmarks demonstrate a speedup of up to 7.6x on an 8-core system. (author)

Evaluation of the 1996 predictions of the run-timing of wild migrant spring/summer yearling chinook in the Snake River Basin using Program RealTime

International Nuclear Information System (INIS)

Townsend, R.L.; Yasuda, D.; Skalski, J.R.

1997-03-01

This report is a post-season analysis of the accuracy of the 1996 predictions from the program RealTime. Observed 1996 migration data collected at Lower Granite Dam were compared to the predictions made by RealTime for the spring outmigration of wild spring/summer chinook. Appendix A displays the graphical reports of the RealTime program that were interactively accessible via the World Wide Web during the 1996 migration season. Final reports are available at address http://www.cqs.washington.edu/crisprt/. The CRISP model incorporated the predictions of the run status to move the timing forecasts further down the Snake River to Little Goose, Lower Monumental and McNary Dams. An analysis of the dams below Lower Granite Dam is available separately

Route around real time

International Nuclear Information System (INIS)

Terrier, Francois

1996-01-01

The greater and greater autonomy and complexity asked to the control and command systems lead to work on introducing techniques such as Artificial Intelligence or concurrent object programming in industrial applications. However, while the critical feature of these systems impose to control the dynamics of the proposed solutions, their complexity often imposes a high adaptability to a partially modelled environment. The studies presented start from low level control and command systems to more complex applications at higher levels, such as 'supervision systems'. Techniques such as temporal reasoning and uncertainty management are proposed for the first studies, while the second are tackled with programming techniques based on the real time object paradigm. The outcomes of this itinerary crystallize on the ACCORD project which targets to manage - on the whole life cycle of a real time application - these two problematics, sometimes antagonistic: control of the dynamics and adaptivity. (author) [fr

Embedding Java Types in CPN Tools

DEFF Research Database (Denmark)

Lassen, Kristian Bisgaard; Westergaard, Michael

the modeller to call methods on Java ob jects. This paper is about how the stub code is generated, i.e., representing Java classes to Standard ML to be able to call Java code in the CPN models, and how the BRITNeY Suite framework handles the invocations of the stub code. The contribution of this paper is give......CPN Tools is a well known editor for Colored Petri nets (CPNs) that is capable of doing state space and performance analysis. The BRITNeY Suite has added yet another feature to CPN Tools for integrating CPN models with Java programs, by providing stubs accessible from the models, to allow...

Learning Java by building Android games

CERN Document Server

Horton, John

2015-01-01

If you are completely new to either Java, Android, or game programming and are aiming to publish Android games, then this book is for you. This book also acts as a refresher for those who already have experience in Java on another platforms or other object-oriented languages.

Psychophysics in a Web browser? Comparing response times collected with JavaScript and Psychophysics Toolbox in a visual search task.

Science.gov (United States)

de Leeuw, Joshua R; Motz, Benjamin A

2016-03-01

Behavioral researchers are increasingly using Web-based software such as JavaScript to conduct response time experiments. Although there has been some research on the accuracy and reliability of response time measurements collected using JavaScript, it remains unclear how well this method performs relative to standard laboratory software in psychologically relevant experimental manipulations. Here we present results from a visual search experiment in which we measured response time distributions with both Psychophysics Toolbox (PTB) and JavaScript. We developed a methodology that allowed us to simultaneously run the visual search experiment with both systems, interleaving trials between two independent computers, thus minimizing the effects of factors other than the experimental software. The response times measured by JavaScript were approximately 25 ms longer than those measured by PTB. However, we found no reliable difference in the variability of the distributions related to the software, and both software packages were equally sensitive to changes in the response times as a result of the experimental manipulations. We concluded that JavaScript is a suitable tool for measuring response times in behavioral research.

A Programmable Microkernel for Real-Time Systems

Science.gov (United States)

2003-06-01

A Programmable Microkernel for Real - Time Systems Christoph M. Kirsch Thomas A. Henzinger Marco A.A. Sanvido Report No. UCB/CSD-3-1250 June 2003...TITLE AND SUBTITLE A Programmable Microkernel for Real - Time Systems 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S...THIS PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 A Programmable Microkernel for Real - Time Systems ∗ Christoph M

A modification of Java virtual machine for counting bytecode commands

OpenAIRE

Nikolaj, Janko

2014-01-01

The objective of the thesis was to implement or modify an existing Java virtual machine (JVM) in a way that it will allow insight into statistics of the executed Java instructions of an executed user program. The functionality will allow analysis of the algorithms in Java environment. After studying the theory of Java and Java virtual machine, we decided to modify an existing Java virtual machine. We chose JamVM which is a lightweight, open-source Java virtual machine under GNU license. The i...

Real-time data access layer for MDSplus

International Nuclear Information System (INIS)

Manduchi, G.; Luchetta, A.; Taliercio, C.; Fredian, T.; Stillerman, J.

2008-01-01

Recent extensions to MDSplus allow data handling in long discharges and provide a real-time data access and communication layer. The real-time data access layer is an additional component of MDSplus: it is possible to use the traditional MDSplus API during normal operation, and to select a subset of data items to be used in real time. Real-time notification is provided by a communication layer using a publish-subscribe pattern. The notification covers processes sharing the same data items even running on different machines, thus allowing the implementation of distributed control systems. The real-time data access layer has been developed for Windows, Linux, and VxWorks; it is currently being ported to Linux RTAI. In order to quantify the fingerprint of the presented system, the performance of the real-time access layer approach is compared with that of an ad hoc, manually optimized program in a sample real-time application

Development of a Java Package for Matrix Programming

OpenAIRE

Lim, Ngee-Peng; Ling, Maurice HT; Lim, Shawn YC; Choi, Ji-Hee; Teo, Henry BK

2003-01-01

We had assembled a Java package, known as MatrixPak, of four classes for the purpose of numerical matrix computation. The classes are matrix, matrix_operations, StrToMatrix, and MatrixToStr; all of which are inherited from java.lang.Object class. Class matrix defines a matrix as a two-dimensional array of float types, and contains the following mathematical methods: transpose, adjoint, determinant, inverse, minor and cofactor. Class matrix_operations contains the following mathematical method...

Java Programs for Using Newmark's Method and Simplified Decoupled Analysis to Model Slope Performance During Earthquakes

Science.gov (United States)

Jibson, Randall W.; Jibson, Matthew W.

2003-01-01

Landslides typically cause a large proportion of earthquake damage, and the ability to predict slope performance during earthquakes is important for many types of seismic-hazard analysis and for the design of engineered slopes. Newmark's method for modeling a landslide as a rigid-plastic block sliding on an inclined plane provides a useful method for predicting approximate landslide displacements. Newmark's method estimates the displacement of a potential landslide block as it is subjected to earthquake shaking from a specific strong-motion record (earthquake acceleration-time history). A modification of Newmark's method, decoupled analysis, allows modeling landslides that are not assumed to be rigid blocks. This open-file report is available on CD-ROM and contains Java programs intended to facilitate performing both rigorous and simplified Newmark sliding-block analysis and a simplified model of decoupled analysis. For rigorous analysis, 2160 strong-motion records from 29 earthquakes are included along with a search interface for selecting records based on a wide variety of record properties. Utilities are available that allow users to add their own records to the program and use them for conducting Newmark analyses. Also included is a document containing detailed information about how to use Newmark's method to model dynamic slope performance. This program will run on any platform that supports the Java Runtime Environment (JRE) version 1.3, including Windows, Mac OSX, Linux, Solaris, etc. A minimum of 64 MB of available RAM is needed, and the fully installed program requires 400 MB of disk space.

Java Test Driver Generation from Object-Oriented Interaction Traces

NARCIS (Netherlands)

M.M. Bonsangue (Marcello); F.S. de Boer (Frank); A. Gruener; M. Steffen

2009-01-01

htmlabstractIn the context of test-driven development for object-oriented programs, mock objects are increasingly used for unit testing. Several Java mock object frameworks exist, which all have in common that mock objects, realizing the test environment, are directly specied at the Java program

Novel Advancements in Internet-Based Real Time Data Technologies

Science.gov (United States)

Myers, Gerry; Welch, Clara L. (Technical Monitor)

2002-01-01

AZ Technology has been working with MSFC Ground Systems Department to find ways to make it easier for remote experimenters (RPI's) to monitor their International Space Station (ISS) payloads in real-time from anywhere using standard/familiar devices. AZ Technology was awarded an SBIR Phase I grant to research the technologies behind and advancements of distributing live ISS data across the Internet. That research resulted in a product called "EZStream" which is in use on several ISS-related projects. Although the initial implementation is geared toward ISS, the architecture and lessons learned are applicable to other space-related programs. This paper presents the high-level architecture and components that make up EZStream. A combination of commercial-off-the-shelf (COTS) and custom components were used and their interaction will be discussed. The server is powered by Apache's Jakarta-Tomcat web server/servlet engine. User accounts are maintained in a My SQL database. Both Tomcat and MySQL are Open Source products. When used for ISS, EZStream pulls the live data directly from NASA's Telescience Resource Kit (TReK) API. TReK parses the ISS data stream into individual measurement parameters and performs on-the- fly engineering unit conversion and range checking before passing the data to EZStream for distribution. TReK is provided by NASA at no charge to ISS experimenters. By using a combination of well established Open Source, NASA-supplied. and AZ Technology-developed components, operations using EZStream are robust and economical. Security over the Internet is a major concern on most space programs. This paper describes how EZStream provides for secure connection to and transmission of space- related data over the public Internet. Display pages that show sensitive data can be placed under access control by EZStream. Users are required to login before being allowed to pull up those web pages. To enhance security, the EZStream client/server data transmissions can

Mixed - mode Operating System for Real - time Performance

Directory of Open Access Journals (Sweden)

Hasan M. M.

2017-11-01

Full Text Available The purpose of the mixed-mode system research is to handle devices with the accuracy of real-time systems and at the same time, having all the benefits and facilities of a matured Graphic User Interface(GUIoperating system which is typicallynon-real-time. This mixed-mode operating system comprising of a real-time portion and a non-real-time portion was studied and implemented to identify the feasibilities and performances in practical applications (in the context of scheduled the real-time events. In this research an i8751 microcontroller-based hardware was used to measure the performance of the system in real-time-only as well as non-real-time-only configurations. The real-time portion is an 486DX-40 IBM PC system running under DOS-based real-time kernel and the non-real-time portion is a Pentium IIIbased system running under Windows NT. It was found that mixed-mode systems performed as good as a typical real-time system and in fact, gave many additional benefits such as simplified/modular programming and load tolerance.

High-Performance Java Codes for Computational Fluid Dynamics

Science.gov (United States)

Riley, Christopher; Chatterjee, Siddhartha; Biswas, Rupak; Biegel, Bryan (Technical Monitor)

2001-01-01

The computational science community is reluctant to write large-scale computationally -intensive applications in Java due to concerns over Java's poor performance, despite the claimed software engineering advantages of its object-oriented features. Naive Java implementations of numerical algorithms can perform poorly compared to corresponding Fortran or C implementations. To achieve high performance, Java applications must be designed with good performance as a primary goal. This paper presents the object-oriented design and implementation of two real-world applications from the field of Computational Fluid Dynamics (CFD): a finite-volume fluid flow solver (LAURA, from NASA Langley Research Center), and an unstructured mesh adaptation algorithm (2D_TAG, from NASA Ames Research Center). This work builds on our previous experience with the design of high-performance numerical libraries in Java. We examine the performance of the applications using the currently available Java infrastructure and show that the Java version of the flow solver LAURA performs almost within a factor of 2 of the original procedural version. Our Java version of the mesh adaptation algorithm 2D_TAG performs within a factor of 1.5 of its original procedural version on certain platforms. Our results demonstrate that object-oriented software design principles are not necessarily inimical to high performance.

Design of real-time operating system software

International Nuclear Information System (INIS)

Stafford, D.L.; Hulbert, A.J.

1976-01-01

Design of real-time data collection and control systems is complicated by problems not found in common sequential programming projects. Timing and synchronization are critical; data collection equipment is often completely foreign to mainframe programming facilities; operating system response to real-time events may be far too slow or too cumbersome. The philosophy at the Inhalation Toxicology Research Institute (ITRI) is to allow the investigators to do as much of their own programming as possible. Inasmuch as programming is not their primary responsibility or area of training, it is unreasonable to assume that they are familiar with the subtleties involved. The problem, therefore, has been to develop a system whereby investigators are able, with minimal consultation, to write, modify and otherwise maintain their own data collection and control programs and to do so with a minimum of destructive interaction with other data collection and control tasks

Java EE 7 recipes a problem-solution approach

CERN Document Server

Juneau, Josh

2013-01-01

Java EE 7 Recipes takes an example-based approach in showing how to program Enterprise Java applications in many different scenarios. Be it a small-business web application, or an enterprise database application, Java EE 7 Recipes provides effective and proven solutions to accomplish just about any task that you may encounter. You can feel confident using the reliable solutions that are demonstrated in this book in your personal or corporate environment. The solutions in Java EE 7 Recipes are built using the most current Java Enterprise specifications, including EJB 3.2, JSF 2.2, Expression La

APINetworks Java. A Java approach to the efficient treatment of large-scale complex networks

Science.gov (United States)

Muñoz-Caro, Camelia; Niño, Alfonso; Reyes, Sebastián; Castillo, Miriam

2016-10-01

We present a new version of the core structural package of our Application Programming Interface, APINetworks, for the treatment of complex networks in arbitrary computational environments. The new version is written in Java and presents several advantages over the previous C++ version: the portability of the Java code, the easiness of object-oriented design implementations, and the simplicity of memory management. In addition, some additional data structures are introduced for storing the sets of nodes and edges. Also, by resorting to the different garbage collectors currently available in the JVM the Java version is much more efficient than the C++ one with respect to memory management. In particular, the G1 collector is the most efficient one because of the parallel execution of G1 and the Java application. Using G1, APINetworks Java outperforms the C++ version and the well-known NetworkX and JGraphT packages in the building and BFS traversal of linear and complete networks. The better memory management of the present version allows for the modeling of much larger networks.

Interprocess Communication with Java in a Microsoft Windows Environment

Directory of Open Access Journals (Sweden)

Dylan Gregory Smith

2017-12-01

Full Text Available The Java programming language provides a comprehensive set of multithreading programming techniques but currently lacks interprocess communication (IPC facilities, other than slow socket-based communication mechanisms (which are intended primarily for distributed systems, not interprocess communication on a multicore or multiprocessor system. This is problematic due to the ubiquity of modern multicore processors, and the widespread use of Java as a programming language throughout the software development industry. This work aimed to address this problem by utilising Microsoft Windows’ native IPC mechanisms through a framework known as the Java Native Interface. This enabled the use of native C code that invoked the IPC mechanisms provided by Windows, which allowed successful synchronous communication between separate Java processes. The results obtained illustrate the performance dichotomy between socket-based communication and native IPC facilities, with Windows’ facilities providing significantly faster communication. Ultimately, these results show that there are far more effective communication structures available. In addition, this work presents generic considerations that may aid in the eventual design of a generic, platform-independent IPC system for the Java programming language. The fundamental considerations include shared memory with semaphore synchronisation, named pipes and a socket communication model.

Vernier Caliper and Micrometer Computer Models Using Easy Java Simulation and Its Pedagogical Design Features--Ideas for Augmenting Learning with Real Instruments

Science.gov (United States)

Wee, Loo Kang; Ning, Hwee Tiang

2014-01-01

This paper presents the customization of Easy Java Simulation models, used with actual laboratory instruments, to create active experiential learning for measurements. The laboratory instruments are the vernier caliper and the micrometer. Three computer model design ideas that complement real equipment are discussed. These ideas involve (1) a…

Development of real-time visualization system for Computational Fluid Dynamics on parallel computers

International Nuclear Information System (INIS)

Muramatsu, Kazuhiro; Otani, Takayuki; Matsumoto, Hideki; Takei, Toshifumi; Doi, Shun

1998-03-01

A real-time visualization system for computational fluid dynamics in a network connecting between a parallel computing server and the client terminal was developed. Using the system, a user can visualize the results of a CFD (Computational Fluid Dynamics) simulation on the parallel computer as a client terminal during the actual computation on a server. Using GUI (Graphical User Interface) on the client terminal, to user is also able to change parameters of the analysis and visualization during the real-time of the calculation. The system carries out both of CFD simulation and generation of a pixel image data on the parallel computer, and compresses the data. Therefore, the amount of data from the parallel computer to the client is so small in comparison with no compression that the user can enjoy the swift image appearance comfortably. Parallelization of image data generation is based on Owner Computation Rule. GUI on the client is built on Java applet. A real-time visualization is thus possible on the client PC only if Web browser is implemented on it. (author)

Bringing Magnetic Field Data in Real-Time for Researchers on Mobile Devices

Science.gov (United States)

Wolf, V. G.; Hampton, D. L.

2013-12-01

Magnetometer data from eight remote stations across Alaska have been collected continuously since the early 1980's by the Geophysical Institute Magnetometer Array (GIMA). These three-axis fluxgate magnetometers, with mobile devices. The incoming data stream from each station is recorded in a database and used to populate the real time graphical display. Improvements in data management increased the sampling rate from 5 seconds to 1 second for the display. The displays are highly configurable to allow researchers the flexibility to interpret the magnetic signature they need to make a successful launch decision. The use of Django and Java script technology enabled the system to be structured for rapid expansion when new stations come online and input streams are improved. Data are also available for download within 24 hours of collection. The existence of real-time data has been and will continue to be critical for successful rocket launches.

JAVA PathFinder

Science.gov (United States)

Mehhtz, Peter

2005-01-01

JPF is an explicit state software model checker for Java bytecode. Today, JPF is a swiss army knife for all sort of runtime based verification purposes. This basically means JPF is a Java virtual machine that executes your program not just once (like a normal VM), but theoretically in all possible ways, checking for property violations like deadlocks or unhandled exceptions along all potential execution paths. If it finds an error, JPF reports the whole execution that leads to it. Unlike a normal debugger, JPF keeps track of every step how it got to the defect.

Fixing the Sorting Algorithm for Android, Java and Python

NARCIS (Netherlands)

C.P.T. de Gouw (Stijn); F.S. de Boer (Frank)

2015-01-01

htmlabstractTim Peters developed the Timsort hybrid sorting algorithm in 2002. TimSort was first developed for Python, a popular programming language, but later ported to Java (where it appears as java.util.Collections.sort and java.util.Arrays.sort). TimSort is today used as the default sorting

Safety-critical Java for embedded systems

DEFF Research Database (Denmark)

Schoeberl, Martin; Dalsgaard, Andreas Engelbredt; Hansen, René Rydhof

2016-01-01

This paper presents the motivation for and outcomes of an engineering research project on certifiable Javafor embedded systems. The project supports the upcoming standard for safety-critical Java, which defines asubset of Java and libraries aiming for development of high criticality systems....... The outcome of this projectinclude prototype safety-critical Java implementations, a time-predictable Java processor, analysis tools formemory safety, and example applications to explore the usability of safety-critical Java for this applicationarea. The text summarizes developments and key contributions...

Flash memory in embedded Java programs

DEFF Research Database (Denmark)

Korsholm, Stephan Erbs

This paper introduces a Java execution environment with the capability for storing constant heap data in Flash, thus saving valuable RAM. The extension is motivated by the structure of three industrial applications which demonstrate the need for storing constant data in Flash on small embedded...

Development of Geometrical Quality Control Real-time Analysis Program using an Electronic Portal Imaging

International Nuclear Information System (INIS)

Lee, Sang Rok; Jung, Kyung Yong; Jang, Min Sun; Lee, Byung Gu; Kwon, Young Ho

2012-01-01

To develop a geometrical quality control real-time analysis program using an electronic portal imaging to replace film evaluation method. A geometrical quality control item was established with the Eclipse treatment planning system (Version 8.1, Varian, USA) after the Electronic Portal Imaging Device (EPID) took care of the problems occurring from the fixed substructure of the linear accelerator (CL-iX, Varian, USA). Electronic portal image (single exposure before plan) was created at the treatment room's 4DTC (Version 10.2, Varian, USA) and a beam was irradiated in accordance with each item. The gaining the entire electronic portal imaging at the Off-line review and was evaluated by a self-developed geometrical quality control real-time analysis program. As for evaluation methods, the intra-fraction error was analyzed by executing 5 times in a row under identical conditions and procedures on the same day, and in order to confirm the infer-fraction error, it was executed for 10 days under identical conditions of all procedures and was compared with the film evaluation method using an Iso-align quality control device. Measurement and analysis time was measured by sorting the time into from the device setup to data achievement and the time amount after the time until the completion of analysis and the convenience of the users and execution processes were compared. The intra-fraction error values for each average 0.1, 0.2, 0.3, 0.2 mm at light-radiation field coincidence, collimator rotation axis, couch rotation axis and gantry rotation axis. By checking the infer-fraction error through 10 days of continuous quality control, the error values obtained were average 1.7, 1.4, 0.7, 1.1 mm for each item. Also, the measurement times were average 36 minutes, 15 minutes for the film evaluation method and electronic portal imaging system, and the analysis times were average 30 minutes, 22 minutes. When conducting a geometrical quality control using an electronic portal imaging

Monitoring the UPS and Downs of Sumatra and Java with D-Insar Time-Series

Science.gov (United States)

Chaussard, E.; Amelung, F.

2010-12-01

We performed, for the first time, a global D-InSAR survey of the Indonesian islands of Sumatra and Java to define locations where deformation is occurring. The goals of this study are 1) to create an inventory of actively deforming volcanic centers and 2) monitor all types of ground motion. This work provides ground deformation data for previously unmonitored areas and can assist the Indonesian authorities to improve hazards assessment. The D-InSAR survey covers an area of about 500 000 km2 and 3000 km long on the islands of Sumatra, Java and Bali. We used ALOS data from 45 tracks and more than 1500 granules obtained from the Alaska Satellite Facility (ASF) through the US Government Research Consortium (USGRC). We completed more than 1000 interferograms spanning a period from the end of 2006 to the beginning of 2009. L-band SAR images enable deformation mapping at global scales even in highly vegetated areas where C-band signal experiences loss of coherence. To identify locations where ground deformations are occurring, we used multiple SAR acquisitions of the same area and performed time series analysis using the Small BAseline Subset (SBAS) method. Interferograms with a maximum spatial baseline of 3000 m were phase-unwrapped and subsequently inverted for the phase with respect to the first acquisition. Temporal coherence of each pixel is computed on the set of interferograms in order to select only pixels with high temporal coherence. The compiled InSAR velocity map reveals the background level of activity of the 84 volcanic centers constituting the Sumatra, Java and Bali volcanic arcs. We identified possible uplift at 6 volcanic centers: Agung (Bali), Lamongan (Java), Lawu (Java), Slamet (Java), Kerinci (Sumatra) and Sinabung (Sumatra). Moreover, we identified subsidence in 5 major cities and 1 coastal area. Subsidence rates range from 6 cm/yr in Medan, the largest city of Sumatra, to more than 15 cm/yr in Jakarta. These major subsidence areas are probably due

A heterogeneous hierarchical architecture for real-time computing

Energy Technology Data Exchange (ETDEWEB)

Skroch, D.A.; Fornaro, R.J.

1988-12-01

The need for high-speed data acquisition and control algorithms has prompted continued research in the area of multiprocessor systems and related programming techniques. The result presented here is a unique hardware and software architecture for high-speed real-time computer systems. The implementation of a prototype of this architecture has required the integration of architecture, operating systems and programming languages into a cohesive unit. This report describes a Heterogeneous Hierarchial Architecture for Real-Time (H{sup 2} ART) and system software for program loading and interprocessor communication.

Analysis of time series for postal shipments in Regional VII East Java Indonesia

Science.gov (United States)

Kusrini, DE; Ulama, B. S. S.; Aridinanti, L.

2018-03-01

The change of number delivery goods through PT. Pos Regional VII East Java Indonesia indicates that the trend of increasing and decreasing the delivery of documents and non-documents in PT. Pos Regional VII East Java Indonesia is strongly influenced by conditions outside of PT. Pos Regional VII East Java Indonesia so that the prediction the number of document and non-documents requires a model that can accommodate it. Based on the time series plot monthly data fluctuations occur from 2013-2016 then the model is done using ARIMA or seasonal ARIMA and selected the best model based on the smallest AIC value. The results of data analysis about the number of shipments on each product sent through the Sub-Regional Postal Office VII East Java indicates that there are 5 post offices of 26 post offices entering the territory. The largest number of shipments is available on the PPB (Paket Pos Biasa is regular package shipment/non-document ) and SKH (Surat Kilat Khusus is Special Express Mail/document) products. The time series model generated is largely a Random walk model meaning that the number of shipment in the future is influenced by random effects that are difficult to predict. Some are AR and MA models, except for Express shipment products with Malang post office destination which has seasonal ARIMA model on lag 6 and 12. This means that the number of items in the following month is affected by the number of items in the previous 6 months.

Learning JavaScript data structures and algorithms

CERN Document Server

Groner, Loiane

2014-01-01

If you are a JavaScript developer or someone who has basic knowledge of JavaScript, and want to explore its optimum ability, this fast-paced book is definitely for you. Programming logic is the only thing you need to know to start having fun with algorithms.

Real-time statistical quality control and ARM

International Nuclear Information System (INIS)

Blough, D.K.

1992-05-01

An important component of the Atmospheric Radiation Measurement (ARM) Program is real-time quality control of data obtained from meteorological instruments. It is the goal of the ARM program to enhance the predictive capabilities of global circulation models by incorporating in them more detailed information on the radiative characteristics of the earth's atmosphere. To this end, a number of Cloud and Radiation Testbeds (CART's) will be built at various locations worldwide. Each CART will consist of an array of instruments designed to collect radiative data. The large amount of data obtained from these instruments necessitates real-time processing in order to flag outliers and possible instrument malfunction. The Bayesian dynamic linear model (DLM) proves to be an effective way of monitoring the time series data which each instrument generates. It provides a flexible yet powerful approach to detecting in real-time sudden shifts in a non-stationary multivariate time series. An application of these techniques to data arising from a remote sensing instrument to be used in the CART is provided. Using real data from a wind profiler, the ability of the DLM to detect outliers is studied. 5 refs

Real Time Wave Forecasting Using Wind Time History and Genetic Programming

Directory of Open Access Journals (Sweden)

A.R. Kambekar

2014-12-01

Full Text Available The significant wave height and average wave period form an essential input for operational activities in ocean and coastal areas. Such information is important in issuing appropriate warnings to people planning any construction or instillation works in the oceanic environment. Many countries over the world routinely collect wave and wind data through a network of wave rider buoys. The data collecting agencies transmit the resulting information online to their registered users through an internet or a web-based system. Operational wave forecasts in addition to the measured data are also made and supplied online to the users. This paper discusses operational wave forecasting in real time mode at locations where wind rather than wave data are continuously recorded. It is based on the time series modeling and incorporates an artificial intelligence technique of genetic programming. The significant wave height and average wave period values are forecasted over a period of 96 hr in future from the observations of wind speed and directions extending to a similar time scale in the past. Wind measurements made by floating buoys at eight different locations around India over a period varying from 1.5 yr to 9.0 yr were considered. The platform of Matlab and C++ was used to develop a graphical user interface that will extend an internet based user-friendly access of the forecasts to any registered user of the data dissemination authority.

JavaFX' Special Effects Taking Java RIA to the Extreme with Animation, Multimedia, and Game Elements

CERN Document Server

Jordon, L

2009-01-01

Enough about learning the fundamentals of the intriguing JavaFX platform; it's now time to start implementing visually stunning and dynamic Java-based rich Internet applications (RIAs) for your desktop or mobile front end. This book will show you what the JavaFX platform can really do for Java desktop and mobile front ends. It presents a number of excellent visual effects and techniques that will make any JavaFX application stand out-whether it's animation, multimedia, or a game. The techniques shown in this book are invaluable for competing in today's market, and they'll help set your RIAs ap

Real-time data collection in Linux: a case study.

Science.gov (United States)

Finney, S A

2001-05-01

Multiuser UNIX-like operating systems such as Linux are often considered unsuitable for real-time data collection because of the potential for indeterminate timing latencies resulting from preemptive scheduling. In this paper, Linux is shown to be fully adequate for precisely controlled programming with millisecond resolution or better. The Linux system calls that subserve such timing control are described and tested and then utilized in a MIDI-based program for tapping and music performance experiments. The timing of this program, including data input and output, is shown to be accurate at the millisecond level. This demonstrates that Linux, with proper programming, is suitable for real-time experiment software. In addition, the detailed description and test of both the operating system facilities and the application program itself may serve as a model for publicly documenting programming methods and software performance on other operating systems.

Tactical Web Services: Using XML and Java Web Services to Conduct Real-Time Net-Centric Sonar Visualization

Science.gov (United States)

2004-09-01

Rosetti USN U.S. Navy Chesterton, IN 6. Erik Chaum NUWC Newport, RI 7. David Bellino NPRI Newport, RI 8. Dick Nadolink NUWC Newport, RI...found at (http://www.parallelgraphics.com/products/cortona). G. JFREECHART JFreeChart is an open source Java API created by David Gilbert and...www.xj3d.org/. Accessed 3 September 2004. Hunter, David , Kurt Cagle, and Chris Dix, eds. Beginning XML, Second Edition. Indianapolis, IN

Analysis of Nuclear Option in Planning on Java Bali Integrated Electricity System By Using Message Program

International Nuclear Information System (INIS)

Masdin; Sudi-Ariyanto; Nuryanti

2004-01-01

The growth of national energy demand in the future still become a great challenge for energy supply sector in Indonesia. The current energy supply strategy focuses the development and diversification of all energy options including fossil fuel, renewable energy and nuclear energy. Based on the Comprehensive Assessment Of Different Energy Source For Electricity Demand Study (CADES), final energy demand will grow from 4,065 PJ in 2000 to about 8,200 PJ in 2025. In this paper, the analysis of national energy system network will be divided into 2 regions, namely Java Bali region and Outside Java Bali region. Period of time horizon chosen in this study is 25 years (2000 to 2025). Simulation of network system configuration based on minimum objective function criteria was done by using MESSAGE (Model for Energy Supply Strategy Alternatives and their General Environmental Impacts) computer program. The focus of the analysis in this paper is simulation of electricity planning sector for Java Bali region. The result of simulation shows that for scenarios with no limitation on all fuel for power plant, scenario where fuel oil as constant supply for power plant and also configuration with limitation on gas supply, Nuclear Power Plant (NPP) does not appear during the study period using cost parameter set in this study. If there are limitations on gas supply and constrains of emissions (SO 2 and CO 2 ) due to coal combustion, NPP would become competitive and appear at about year 2015. (author)

Competitive On-Line Scheduling for Overloaded Real-Time Systems

Science.gov (United States)

1993-09-01

Real - Time Systems by Gilad Koren a dissertation submitted in partial fulfillment of the requirements...Overloaded Real - Time Systems 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK...1.1 Introduction : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 2 1.1.1 Real - Time Systems : : : : : : : : : : : : : : : : : : : : : : : : : : : :

MARTe: A Multiplatform Real-Time Framework

Science.gov (United States)

Neto, André C.; Sartori, Filippo; Piccolo, Fabio; Vitelli, Riccardo; De Tommasi, Gianmaria; Zabeo, Luca; Barbalace, Antonio; Fernandes, Horacio; Valcarcel, Daniel F.; Batista, Antonio J. N.

2010-04-01

Development of real-time applications is usually associated with nonportable code targeted at specific real-time operating systems. The boundary between hardware drivers, system services, and user code is commonly not well defined, making the development in the target host significantly difficult. The Multithreaded Application Real-Time executor (MARTe) is a framework built over a multiplatform library that allows the execution of the same code in different operating systems. The framework provides the high-level interfaces with hardware, external configuration programs, and user interfaces, assuring at the same time hard real-time performances. End-users of the framework are required to define and implement algorithms inside a well-defined block of software, named Generic Application Module (GAM), that is executed by the real-time scheduler. Each GAM is reconfigurable with a set of predefined configuration meta-parameters and interchanges information using a set of data pipes that are provided as inputs and required as output. Using these connections, different GAMs can be chained either in series or parallel. GAMs can be developed and debugged in a non-real-time system and, only once the robustness of the code and correctness of the algorithm are verified, deployed to the real-time system. The software also supplies a large set of utilities that greatly ease the interaction and debugging of a running system. Among the most useful are a highly efficient real-time logger, HTTP introspection of real-time objects, and HTTP remote configuration. MARTe is currently being used to successfully drive the plasma vertical stabilization controller on the largest magnetic confinement fusion device in the world, with a control loop cycle of 50 ?s and a jitter under 1 ?s. In this particular project, MARTe is used with the Real-Time Application Interface (RTAI)/Linux operating system exploiting the new ?86 multicore processors technology.

Real-Time Multi-Directional Equipment Site

Data.gov (United States)

Federal Laboratory Consortium — As part of the George E. Brown, Jr. Network for Earthquake Engineering Simulation (NEES) Program, Lehigh University has established the Real-Time Multi-Directional...

Java Dust: How Small Can Embedded Java Be?

DEFF Research Database (Denmark)

Caska, James; Schoeberl, Martin

2011-01-01

Java is slowly being accepted as a language and platform for embedded devices. However, the memory requirements of the Java library and runtime are still troublesome. A Java system is considered small when it requires less than 1 MB, and within the embedded domain small microcontollers with a few...... KB on-chip Flash memory and even less on-chip RAM are very common. For such small devices Java is a clearly challenging. In this paper we present the combination of the Java compiler Muvium for microcontrollers with the tiny soft-core Leros for an FPGA. To the best of our knowledge, the presented...... embedded Java system is the smallest Java system available. The Leros processor consumes less than 5% of the logic cells of the smallest FPGA from Altera and the Muvium compiler produces a JVM, including the Java application, that can execute in a few KB ROM and less than 1 KB RAM. The Leros processor...

Geomagnetic Observatory Data for Real-Time Applications

Science.gov (United States)

Love, J. J.; Finn, C. A.; Rigler, E. J.; Kelbert, A.; Bedrosian, P.

2015-12-01

The global network of magnetic observatories represents a unique collective asset for the scientific community. Historically, magnetic observatories have supported global magnetic-field mapping projects and fundamental research of the Earth's interior and surrounding space environment. More recently, real-time data streams from magnetic observatories have become an important contributor to multi-sensor, operational monitoring of evolving space weather conditions, especially during magnetic storms. In this context, the U.S. Geological Survey (1) provides real-time observatory data to allied space weather monitoring projects, including those of NOAA, the U.S. Air Force, NASA, several international agencies, and private industry, (2) collaborates with Schlumberger to provide real-time geomagnetic data needed for directional drilling for oil and gas in Alaska, (3) develops products for real-time evaluation of hazards for the electric-power grid industry that are associated with the storm-time induction of geoelectric fields in the Earth's conducting lithosphere. In order to implement strategic priorities established by the USGS Natural Hazards Mission Area and the National Science and Technology Council, and with a focus on developing new real-time products, the USGS is (1) leveraging data management protocols already developed by the USGS Earthquake Program, (2) developing algorithms for mapping geomagnetic activity, a collaboration with NASA and NOAA, (3) supporting magnetotelluric surveys and developing Earth conductivity models, a collaboration with Oregon State University and the NSF's EarthScope Program, (4) studying the use of geomagnetic activity maps and Earth conductivity models for real-time estimation of geoelectric fields, (5) initiating geoelectric monitoring at several observatories, (6) validating real-time estimation algorithms against historical geomagnetic and geoelectric data. The success of these long-term projects is subject to funding constraints

Formal semantic specifications as implementation blueprints for real-time programming languages

Science.gov (United States)

Feyock, S.

1981-01-01

Formal definitions of language and system semantics provide highly desirable checks on the correctness of implementations of programming languages and their runtime support systems. If these definitions can give concrete guidance to the implementor, major increases in implementation accuracy and decreases in implementation effort can be achieved. It is shown that of the wide variety of available methods the Hgraph (hypergraph) definitional technique (Pratt, 1975), is best suited to serve as such an implementation blueprint. A discussion and example of the Hgraph technique is presented, as well as an overview of the growing body of implementation experience of real-time languages based on Hgraph semantic definitions.

Mixed-mode Operating System for Real-time Performance

Directory of Open Access Journals (Sweden)

M.M. Hasan

2017-11-01

Full Text Available The purpose of the mixed-mode system research is to handle devices with the accuracy of real-time systems and at the same time, having all the benefits and facilities of a matured Graphic User Interface (GUI operating system which is typically nonreal-time. This mixed-mode operating system comprising of a real-time portion and a non-real-time portion was studied and implemented to identify the feasibilities and performances in practical applications (in the context of scheduled the real-time events. In this research an i8751 microcontroller-based hardware was used to measure the performance of the system in real-time-only as well as non-real-time-only configurations. The real-time portion is an 486DX-40 IBM PC system running under DOS-based realtime kernel and the non-real-time portion is a Pentium III based system running under Windows NT. It was found that mixed-mode systems performed as good as a typical realtime system and in fact, gave many additional benefits such as simplified/modular programming and load tolerance.

Design and develop a video conferencing framework for real-time telemedicine applications using secure group-based communication architecture.

Science.gov (United States)

Mat Kiah, M L; Al-Bakri, S H; Zaidan, A A; Zaidan, B B; Hussain, Muzammil

2014-10-01

One of the applications of modern technology in telemedicine is video conferencing. An alternative to traveling to attend a conference or meeting, video conferencing is becoming increasingly popular among hospitals. By using this technology, doctors can help patients who are unable to physically visit hospitals. Video conferencing particularly benefits patients from rural areas, where good doctors are not always available. Telemedicine has proven to be a blessing to patients who have no access to the best treatment. A telemedicine system consists of customized hardware and software at two locations, namely, at the patient's and the doctor's end. In such cases, the video streams of the conferencing parties may contain highly sensitive information. Thus, real-time data security is one of the most important requirements when designing video conferencing systems. This study proposes a secure framework for video conferencing systems and a complete management solution for secure video conferencing groups. Java Media Framework Application Programming Interface classes are used to design and test the proposed secure framework. Real-time Transport Protocol over User Datagram Protocol is used to transmit the encrypted audio and video streams, and RSA and AES algorithms are used to provide the required security services. Results show that the encryption algorithm insignificantly increases the video conferencing computation time.

Recaf: Java dialects as libraries

NARCIS (Netherlands)

Biboudis, A. (Aggelos); P.A. Inostroza Valdera (Pablo); T. van der Storm (Tijs)

2016-01-01

textabstractMainstream programming languages like Java have limited support for language extensibility. Without mechanisms for syntactic abstraction, new programming styles can only be embedded in the form of libraries, limiting expressiveness. In this paper, we present Recaf, a lightweight tool for

Java application for the superposition T-matrix code to study the optical properties of cosmic dust aggregates

Science.gov (United States)

Halder, P.; Chakraborty, A.; Deb Roy, P.; Das, H. S.

2014-09-01

In this paper, we report the development of a java application for the Superposition T-matrix code, JaSTA (Java Superposition T-matrix App), to study the light scattering properties of aggregate structures. It has been developed using Netbeans 7.1.2, which is a java integrated development environment (IDE). The JaSTA uses double precession superposition codes for multi-sphere clusters in random orientation developed by Mackowski and Mischenko (1996). It consists of a graphical user interface (GUI) in the front hand and a database of related data in the back hand. Both the interactive GUI and database package directly enable a user to model by self-monitoring respective input parameters (namely, wavelength, complex refractive indices, grain size, etc.) to study the related optical properties of cosmic dust (namely, extinction, polarization, etc.) instantly, i.e., with zero computational time. This increases the efficiency of the user. The database of JaSTA is now created for a few sets of input parameters with a plan to create a large database in future. This application also has an option where users can compile and run the scattering code directly for aggregates in GUI environment. The JaSTA aims to provide convenient and quicker data analysis of the optical properties which can be used in different fields like planetary science, atmospheric science, nano science, etc. The current version of this software is developed for the Linux and Windows platform to study the light scattering properties of small aggregates which will be extended for larger aggregates using parallel codes in future. Catalogue identifier: AETB_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AETB_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 571570 No. of bytes in distributed program

Java programming and Internet technologies for undergraduate education

Science.gov (United States)

Christian, Wolfgang

2000-05-01

Although it is somewhat of a cliché that computers are revolutionizing education, it is still not common to find computer-based interactive curricular material. Internet technologies are likely to change this situation by providing standards based on virtual machines and meta-languages. Adopting these technologies may improve the teaching of the underlying physics. This paper describes a set of Java applets, known as Physlets, that make use of these technologies. Physlets are designed to communicate with browsers by employing a scripting language such as JavaScript, thereby allowing one applet to be used in many different contexts.

Real Time Linux - The RTOS for Astronomy?

Science.gov (United States)

Daly, P. N.

The BoF was attended by about 30 participants and a free CD of real time Linux-based upon RedHat 5.2-was available. There was a detailed presentation on the nature of real time Linux and the variants for hard real time: New Mexico Tech's RTL and DIAPM's RTAI. Comparison tables between standard Linux and real time Linux responses to time interval generation and interrupt response latency were presented (see elsewhere in these proceedings). The present recommendations are to use RTL for UP machines running the 2.0.x kernels and RTAI for SMP machines running the 2.2.x kernel. Support, both academically and commercially, is available. Some known limitations were presented and the solutions reported e.g., debugging and hardware support. The features of RTAI (scheduler, fifos, shared memory, semaphores, message queues and RPCs) were described. Typical performance statistics were presented: Pentium-based oneshot tasks running > 30kHz, 486-based oneshot tasks running at ~ 10 kHz, periodic timer tasks running in excess of 90 kHz with average zero jitter peaking to ~ 13 mus (UP) and ~ 30 mus (SMP). Some detail on kernel module programming, including coding examples, were presented showing a typical data acquisition system generating simulated (random) data writing to a shared memory buffer and a fifo buffer to communicate between real time Linux and user space. All coding examples were complete and tested under RTAI v0.6 and the 2.2.12 kernel. Finally, arguments were raised in support of real time Linux: it's open source, free under GPL, enables rapid prototyping, has good support and the ability to have a fully functioning workstation capable of co-existing hard real time performance. The counter weight-the negatives-of lack of platforms (x86 and PowerPC only at present), lack of board support, promiscuous root access and the danger of ignorance of real time programming issues were also discussed. See ftp://orion.tuc.noao.edu/pub/pnd/rtlbof.tgz for the StarOffice overheads

High Performance JavaScript

CERN Document Server

Zakas, Nicholas

2010-01-01

If you're like most developers, you rely heavily on JavaScript to build interactive and quick-responding web applications. The problem is that all of those lines of JavaScript code can slow down your apps. This book reveals techniques and strategies to help you eliminate performance bottlenecks during development. You'll learn how to improve execution time, downloading, interaction with the DOM, page life cycle, and more. Yahoo! frontend engineer Nicholas C. Zakas and five other JavaScript experts -- Ross Harmes, Julien Lecomte, Steven Levithan, Stoyan Stefanov, and Matt Sweeney -- demonstra

Formalising the Safety of Java, the Java Virtual Machine and Java Card

OpenAIRE

Hartel, Pieter H.; Moreau, Luc

2001-01-01

We review the existing literature on Java safety, emphasizing formal approaches, and the impact of Java safety on small footprint devices such as smart cards. The conclusion is that while a lot of good work has been done, a more concerted effort is needed to build a coherent set of machine readable formal models of the whole of Java and its implementation. This is a formidable task but we believe it is essential to building trust in Java safety, and thence to achieve ITSEC level 6 or Common C...

ELIST8: simulating military deployments in Java

International Nuclear Information System (INIS)

Van Groningen, C. N.; Blachowicz, D.; Braun, M. D.; Simunich, K. L.; Widing, M. A.

2002-01-01

Planning for the transportation of large amounts of equipment, troops, and supplies presents a complex problem. Many options, including modes of transportation, vehicles, facilities, routes, and timing, must be considered. The amount of data involved in generating and analyzing a course of action (e.g., detailed information about military units, logistical infrastructures, and vehicles) is enormous. Software tools are critical in defining and analyzing these plans. Argonne National Laboratory has developed ELIST (Enhanced Logistics Intra-theater Support Tool), a simulation-based decision support system, to assist military planners in determining the logistical feasibility of an intra-theater course of action. The current version of ELIST (v.8) contains a discrete event simulation developed using the Java programming language. Argonne selected Java because of its object-oriented framework, which has greatly facilitated entity and process development within the simulation, and because it fulfills a primary requirement for multi-platform execution. This paper describes the model, including setup and analysis, a high-level architectural design, and an evaluation of Java

Issues Involved in Developing Ada Real-Time Systems

Science.gov (United States)

1989-02-15

expensive modifications to the compiler or Ada runtime system to fit a particular application. Whether we can solve the problems of programming real - time systems in...lock in solutions to problems that are not yet well understood in standards as rigorous as the Ada language. Moreover, real - time systems typically have

Beginning JavaFX

CERN Document Server

Mohan, Praveen

2010-01-01

The open source JavaFX platform offers a Java-based approach to rich Internet application (RIA) development - an alternative to Adobe Flash/Flex and Microsoft Silverlight. At over 100 million downloads, the new JavaFX is poised to be a significant player now. Written by a JavaFX engineer and developer, this book is one of the first on the new JavaFX platform to give you the following: * The fundamentals of JavaFX scripting on desktop and mobile platforms * Examples of RIAs using JavaFX Graphics * Media and animation using JavaFX See how JavaFX gives you dynamic Java effects in your RIA applica

JAVA CLASSES FOR NONPROCEDURAL VARIOGRAM MONITORING

Science.gov (United States)

A set of Java classes was written for variogram modeling to support research for US EPA's Regional Vulnerability Assessment Program (ReVA). The modeling objectives of this research program are to use conceptual programming tools for numerical analysis for regional risk assessm...

Real Time Monitor of Grid job executions

International Nuclear Information System (INIS)

Colling, D J; Martyniak, J; McGough, A S; Krenek, A; Sitera, J; Mulac, M; Dvorak, F

2010-01-01

In this paper we describe the architecture and operation of the Real Time Monitor (RTM), developed by the Grid team in the HEP group at Imperial College London. This is arguably the most popular dissemination tool within the EGEE [1] Grid. Having been used, on many occasions including GridFest and LHC inauguration events held at CERN in October 2008. The RTM gathers information from EGEE sites hosting Logging and Bookkeeping (LB) services. Information is cached locally at a dedicated server at Imperial College London and made available for clients to use in near real time. The system consists of three main components: the RTM server, enquirer and an apache Web Server which is queried by clients. The RTM server queries the LB servers at fixed time intervals, collecting job related information and storing this in a local database. Job related data includes not only job state (i.e. Scheduled, Waiting, Running or Done) along with timing information but also other attributes such as Virtual Organization and Computing Element (CE) queue - if known. The job data stored in the RTM database is read by the enquirer every minute and converted to an XML format which is stored on a Web Server. This decouples the RTM server database from the client removing the bottleneck problem caused by many clients simultaneously accessing the database. This information can be visualized through either a 2D or 3D Java based client with live job data either being overlaid on to a 2 dimensional map of the world or rendered in 3 dimensions over a globe map using OpenGL.

The Operational Semantics of a Java Secure Processor

NARCIS (Netherlands)

Hartel, Pieter H.; Butler, M.J.; Levy, M.; Alves-Foss, J.

1999-01-01

A formal specification of a Java Secure Processor is presented, which is mechanically checked for type consistency, well formedness and operational conservativity. The specification is executable and it is used to animate and study the behaviour of sample Java programs. The purpose of the semantics

Specifying and verifying requirements of real-time systems

DEFF Research Database (Denmark)

Ravn, Anders P.; Rischel, Hans; Hansen, Kirsten Mark

1993-01-01

, a real-time interval logic, where predicates define durations of states. Requirements define safety and functionality constraints on the system or a component. A top-level design is given by a control law: a predicate that defines an automation controlling the transition between phases of operation. Each......An approach to specification of requirements and verification of design for real-time systems is presented. A system is defined by a conventional mathematical model for a dynamic system where application specific states denote functions of real time. Specifications are formulas in duration calculus...... phase maintains certain relations among the system states; this is analogous to the control functions known from conventional control theory. The top-level design is decomposed into an architecture for a distributed system with specifications for sensor, actuator, and program components. Programs...

Socioeconomic and familial characteristics influence caretakers' adherence to the periodic vitamin A capsule supplementation program in Central Java, Indonesia.

Science.gov (United States)

Pangaribuan, Rosnani; Scherbaum, Veronika; Erhardt, Jürgen G; Sastroamidjojo, Soemilah; Biesalski, Hans K

2004-06-01

The adherence of program participants to periodic vitamin A capsule (VAC) supplementation among children aged 1-5 years (n = 677) in Central Java, Indonesia was assessed. Fourteen villages from five sub-districts and one ward from one sub-district in Central Java were included in the study to represent rural and suburban areas. All questions about demographic factors, socioeconomic conditions, current dietary practice and healthcare-seeking attitudes for common childhood illnesses, previous breastfeeding experience, their knowledge about vitamin A and adherence to the VAC program after capsule distribution (two periods in 2000) were asked. Caretakers with limited knowledge about the health benefits of vitamin A, households with more than one preschool child, and households with older children (> 36 months) were associated with a decreased likelihood of regular participation in the program with odds ratios of 0.38, 0.55, and 0.26, respectively (p program regularly with an odds ratio of 2.02 (p program.

Database Access through Java Technologies

Directory of Open Access Journals (Sweden)

Nicolae MERCIOIU

2010-09-01

Full Text Available As a high level development environment, the Java technologies offer support to the development of distributed applications, independent of the platform, providing a robust set of methods to access the databases, used to create software components on the server side, as well as on the client side. Analyzing the evolution of Java tools to access data, we notice that these tools evolved from simple methods that permitted the queries, the insertion, the update and the deletion of the data to advanced implementations such as distributed transactions, cursors and batch files. The client-server architectures allows through JDBC (the Java Database Connectivity the execution of SQL (Structured Query Language instructions and the manipulation of the results in an independent and consistent manner. The JDBC API (Application Programming Interface creates the level of abstractization needed to allow the call of SQL queries to any DBMS (Database Management System. In JDBC the native driver and the ODBC (Open Database Connectivity-JDBC bridge and the classes and interfaces of the JDBC API will be described. The four steps needed to build a JDBC driven application are presented briefly, emphasizing on the way each step has to be accomplished and the expected results. In each step there are evaluations on the characteristics of the database systems and the way the JDBC programming interface adapts to each one. The data types provided by SQL2 and SQL3 standards are analyzed by comparison with the Java data types, emphasizing on the discrepancies between those and the SQL types, but also the methods that allow the conversion between different types of data through the methods of the ResultSet object. Next, starting from the metadata role and studying the Java programming interfaces that allow the query of result sets, we will describe the advanced features of the data mining with JDBC. As alternative to result sets, the Rowsets add new functionalities that

Real Time Processing

CERN Multimedia

CERN. Geneva; ANDERSON, Dustin James; DOGLIONI, Caterina

2015-01-01

The LHC provides experiments with an unprecedented amount of data. Experimental collaborations need to meet storage and computing requirements for the analysis of this data: this is often a limiting factor in the physics program that would be achievable if the whole dataset could be analysed. In this talk, I will describe the strategies adopted by the LHCb, CMS and ATLAS collaborations to overcome these limitations and make the most of LHC data: data parking, data scouting, and real-time analysis.

Integrating R and Java for Enhancing Interactivity of Algorithmic Data Analysis Software Solutions

Directory of Open Access Journals (Sweden)

Titus Felix FURTUNĂ

2016-06-01

Full Text Available Conceiving software solutions for statistical processing and algorithmic data analysis involves handling diverse data, fetched from various sources and in different formats, and presenting the results in a suggestive, tailorable manner. Our ongoing research aims to design programming technics for integrating R developing environment with Java programming language for interoperability at a source code level. The goal is to combine the intensive data processing capabilities of R programing language, along with the multitude of statistical function libraries, with the flexibility offered by Java programming language and platform, in terms of graphical user interface and mathematical function libraries. Both developing environments are multiplatform oriented, and can complement each other through interoperability. R is a comprehensive and concise programming language, benefiting from a continuously expanding and evolving set of packages for statistical analysis, developed by the open source community. While is a very efficient environment for statistical data processing, R platform lacks support for developing user friendly, interactive, graphical user interfaces (GUIs. Java on the other hand, is a high level object oriented programming language, which supports designing and developing performant and interactive frameworks for general purpose software solutions, through Java Foundation Classes, JavaFX and various graphical libraries. In this paper we treat both aspects of integration and interoperability that refer to integrating Java code into R applications, and bringing R processing sequences into Java driven software solutions. Our research has been conducted focusing on case studies concerning pattern recognition and cluster analysis.

Index summation in real time statistical field theory

International Nuclear Information System (INIS)

Carrington, M.E.; Fugleberg, T.; Irvine, D.S.; Pickering, D.

2007-01-01

We have written a Mathematica program that calculates the integrand corresponding to any amplitude in the closed-time-path formulation of real time statistical field theory. The program is designed so that it can be used by someone with no previous experience with Mathematica. It performs the contractions over the tensor indices that appear in real time statistical field theory and gives the result in the 1-2, Keldysh or RA basis. The program treats all fields as scalars, but the result can be applied to theories with dirac and lorentz structure by making simple adjustments. As an example, we have used the program to calculate the ward identity for the QED 3-point function, the QED 4-point function for two photons and two fermions, and the QED 5-point function for three photons and two fermions. In real time statistical field theory, there are seven 3-point functions, 15 4-point functions and 31 5-point functions. We produce a table that gives the results for all of these functions. In addition, we give a simple general expression for the KMS conditions between n-point green functions and vertex functions, in both the Keldysh and RA bases. (orig.)

Distributed management system of a scanning robot programmed real time in APL language

International Nuclear Information System (INIS)

Liabot, M.-J.

1980-08-01

The aim of this work is to propose an original solution in order to implement the control operating system of a robot designed to travel between the main tank and the safety tank of the SUPERPHENIX reactor for scanning up the welding by ultrasound measurements. The system consists of: - a MITRA mini-computer programmed in APL, that manages the driving unit and defines the scanning strategy (visual unit, cheking board...). - a microprocessor that realizes the connection between the MITRA and the robot on wich the motor commands and the safety fonctions are placed. Such a solution allows to limit input output volume in the MITRA and gives the possibility to program the system in real time in APL language [fr

Beginning HTML, XHTML, CSS, and JavaScript

CERN Document Server

Duckett, Jon

2010-01-01

An indispensable introductory guide to creating web pages using the most up-to-date standards. This beginner guide shows you how to use XHTML, CSS, and JavaScript to create compelling Web sites. While learning these technologies, you will discover coding practices such as writing code that works on multiple browsers including mobile devices, how to use AJAX frameworks to add interactivity to your pages, and how to ensure your pages meet accessible requirements. Packed with real-world examples, the book not only teaches you how to write Web sites using XHTML, CSS and JavaScript, but it also tea

Real-Time PCR for Universal Phytoplasma Detection and Quantification

DEFF Research Database (Denmark)

Christensen, Nynne Meyn; Nyskjold, Henriette; Nicolaisen, Mogens

2013-01-01

Currently, the most efficient detection and precise quantification of phytoplasmas is by real-time PCR. Compared to nested PCR, this method is less sensitive to contamination and is less work intensive. Therefore, a universal real-time PCR method will be valuable in screening programs and in other...

Learning PHP, MySQL, and JavaScript

CERN Document Server

Nixon, Robin

2009-01-01

If you know HTML, this guide will have you building interactive websites quickly. You'll learn how to create responsive, data-driven websites with PHP, MySQL, and JavaScript, regardless of whether you already know how to program. Discover how the powerful combination of PHP and MySQL provides an easy way to build modern websites complete with dynamic data and user interaction. You'll also learn how to add JavaScript to create rich Internet applications and websites. Learning PHP, MySQL, and JavaScript explains each technology separately, shows you how to combine them, and introduces valuable

Functional Reactive Programming on the Web - A Practical Evaluation

OpenAIRE

Young, Christian Strand

2015-01-01

The web as an application platform is rising rapidly. With more complex solutions written in JavaScript that run client-side, as well as server-side, challenges related to JavaScript's asynchronous nature arise. This thesis explores and applies the Functional Reactive Programming paradigm (FRP) on the web as an alternative to traditional imperative programming. The potential of FRP in a context of the web is shown through case implementations of general practical real world problems that web ...

Real-time video compressing under DSP/BIOS

Science.gov (United States)

Chen, Qiu-ping; Li, Gui-ju

2009-10-01

This paper presents real-time MPEG-4 Simple Profile video compressing based on the DSP processor. The programming framework of video compressing is constructed using TMS320C6416 Microprocessor, TDS510 simulator and PC. It uses embedded real-time operating system DSP/BIOS and the API functions to build periodic function, tasks and interruptions etcs. Realize real-time video compressing. To the questions of data transferring among the system. Based on the architecture of the C64x DSP, utilized double buffer switched and EDMA data transfer controller to transit data from external memory to internal, and realize data transition and processing at the same time; the architecture level optimizations are used to improve software pipeline. The system used DSP/BIOS to realize multi-thread scheduling. The whole system realizes high speed transition of a great deal of data. Experimental results show the encoder can realize real-time encoding of 768*576, 25 frame/s video images.

Storm blueprints patterns for distributed real-time computation

CERN Document Server

Goetz, P Taylor

2014-01-01

A blueprints book with 10 different projects built in 10 different chapters which demonstrate the various use cases of storm for both beginner and intermediate users, grounded in real-world example applications.Although the book focuses primarily on Java development with Storm, the patterns are more broadly applicable and the tips, techniques, and approaches described in the book apply to architects, developers, and operations.Additionally, the book should provoke and inspire applications of distributed computing to other industries and domains. Hadoop enthusiasts will also find this book a go

A reliable information management for real-time systems

International Nuclear Information System (INIS)

Nishihara, Takuo; Tomita, Seiji

1995-01-01

In this paper, we propose a system configuration suitable for the hard realtime systems in which integrity and durability of information are important. On most hard real-time systems, where response time constraints are critical, the data which program access are volatile, and may be lost in case the systems are down. But for some real-time systems, the value-added intelligent network (IN) systems, e.g., integrity and durability of the stored data are very important. We propose a distributed system configuration for such hard real-time systems, comprised of service control modules and data management modules. The service control modules process transactions and responses based on deadline control, and the data management modules deal the stored data based on information recovery schemes well-restablished in fault real-time systems. (author)

Implementation of Private Cloud Computing Using Integration of JavaScript and Python

Directory of Open Access Journals (Sweden)

2010-09-01

Full Text Available

Times New Roman" size="3">This paper deals with the design and deployment of a novel library class in Python, enabling the use of JavaScript functionalities in Application Programming and the leveraging of this Library into development for third generation technologies such as Private Cloud Computing. The integration of these two prevalent languages provides us with a new level of compliance which helps in developing an understanding between Web Programming and Application Programming. An inter-browser functionality wrapping, which would enable users to have a JavaScript experience in Python interfaces directly, without having to depend on external programs, has been developed. The functionality of this concept is prevalent in the fact that Applications written in JavaScript and accessed on the browser now have the capability of interacting with each other on a common platform with the help of a Python wrapper. The idea is demonstrated by the integrating with the now ubiquitous Cloud Computing concept. With the help of examples, we have showcased the same and explained how the Library XOCOM can be a stepping stone to flexible cloud computing environment.

An approach to a real-time distribution system

Science.gov (United States)

Kittle, Frank P., Jr.; Paddock, Eddie J.; Pocklington, Tony; Wang, Lui

1990-01-01

The requirements of a real-time data distribution system are to provide fast, reliable delivery of data from source to destination with little or no impact to the data source. In this particular case, the data sources are inside an operational environment, the Mission Control Center (MCC), and any workstation receiving data directly from the operational computer must conform to the software standards of the MCC. In order to supply data to development workstations outside of the MCC, it is necessary to use gateway computers that prevent unauthorized data transfer back to the operational computers. Many software programs produced on the development workstations are targeted for real-time operation. Therefore, these programs must migrate from the development workstation to the operational workstation. It is yet another requirement for the Data Distribution System to ensure smooth transition of the data interfaces for the application developers. A standard data interface model has already been set up for the operational environment, so the interface between the distribution system and the application software was developed to match that model as closely as possible. The system as a whole therefore allows the rapid development of real-time applications without impacting the data sources. In summary, this approach to a real-time data distribution system provides development users outside of the MCC with an interface to MCC real-time data sources. In addition, the data interface was developed with a flexible and portable software design. This design allows for the smooth transition of new real-time applications to the MCC operational environment.

Real-time remote diagnostic monitoring test-bed in JET

International Nuclear Information System (INIS)

Castro, R.; Kneupner, K.; Vega, J.; De Arcas, G.; Lopez, J.M.; Purahoo, K.; Murari, A.; Fonseca, A.; Pereira, A.; Portas, A.

2010-01-01

Based on the remote experimentation concept oriented to long pulse shots, a test-bed system has been implemented in JET. Its main functionality is the real-time monitoring, on remote, of a reflectometer diagnostic, to visualize different data outputs and status information. The architecture of the system is formed by: the data generator components, the data distribution system, an access control service, and the client applications. In the test-bed there is one data generator, which is the acquisition equipment associated with the reflectometer diagnostic that generates data and status information. The data distribution system has been implemented using a publishing-subscribing technology that receives data from data generators and redistributes them to client applications. And finally, for monitoring, a client application based on JAVA Web Start technology has been used. There are three interesting results from this project. The first one is the analysis of different aspects (data formats, data frame rate, data resolution, etc) related with remote real-time diagnostic monitoring oriented to long pulse experiments. The second one is the definition and implementation of an architecture, flexible enough to be applied to different types of data generated from other diagnostics, and that fits with remote access requirements. Finally, the third result is a secure system, taking into account internal networks and firewalls aspects of JET, and securing the access from remote users. For this last issue, PAPI technology has been used, enabling access control based on user attributes, enabling mobile users to monitor diagnostics in real-time, and enabling the integration of this service into the EFDA Federation (Castro et al., 2008 ).

Real-time remote diagnostic monitoring test-bed in JET

Energy Technology Data Exchange (ETDEWEB)

Castro, R., E-mail: rodrigo.castro@ciemat.e [Asociacion EURATOM/CIEMAT para Fusion, Madrid (Spain); Kneupner, K. [EURATOM/UKAEA Fusion Association, Culham Science Centre, Abingdon, OX14 3DB (United Kingdom); Vega, J. [Asociacion EURATOM/CIEMAT para Fusion, Madrid (Spain); De Arcas, G.; Lopez, J.M. [Universidad Politecnica de Madrid, Grupo I2A2, Madrid (Spain); Purahoo, K. [EURATOM/UKAEA Fusion Association, Culham Science Centre, Abingdon, OX14 3DB (United Kingdom); Murari, A. [Associazione EURATOM-ENEA per la Fusione, Consorzio RFX, 4-35127 Padova (Italy); Fonseca, A. [Associacao EURATOM/IST, Lisbon (Portugal); Pereira, A.; Portas, A. [Asociacion EURATOM/CIEMAT para Fusion, Madrid (Spain)

2010-07-15

Based on the remote experimentation concept oriented to long pulse shots, a test-bed system has been implemented in JET. Its main functionality is the real-time monitoring, on remote, of a reflectometer diagnostic, to visualize different data outputs and status information. The architecture of the system is formed by: the data generator components, the data distribution system, an access control service, and the client applications. In the test-bed there is one data generator, which is the acquisition equipment associated with the reflectometer diagnostic that generates data and status information. The data distribution system has been implemented using a publishing-subscribing technology that receives data from data generators and redistributes them to client applications. And finally, for monitoring, a client application based on JAVA Web Start technology has been used. There are three interesting results from this project. The first one is the analysis of different aspects (data formats, data frame rate, data resolution, etc) related with remote real-time diagnostic monitoring oriented to long pulse experiments. The second one is the definition and implementation of an architecture, flexible enough to be applied to different types of data generated from other diagnostics, and that fits with remote access requirements. Finally, the third result is a secure system, taking into account internal networks and firewalls aspects of JET, and securing the access from remote users. For this last issue, PAPI technology has been used, enabling access control based on user attributes, enabling mobile users to monitor diagnostics in real-time, and enabling the integration of this service into the EFDA Federation (Castro et al., 2008 ).

Automated Source Code Analysis to Identify and Remove Software Security Vulnerabilities: Case Studies on Java Programs

OpenAIRE

Natarajan Meghanathan

2013-01-01

The high-level contribution of this paper is to illustrate the development of generic solution strategies to remove software security vulnerabilities that could be identified using automated tools for source code analysis on software programs (developed in Java). We use the Source Code Analyzer and Audit Workbench automated tools, developed by HP Fortify Inc., for our testing purposes. We present case studies involving a file writer program embedded with features for password validation, and ...

JSME: a free molecule editor in JavaScript.

Science.gov (United States)

Bienfait, Bruno; Ertl, Peter

2013-01-01

A molecule editor, i.e. a program facilitating graphical input and interactive editing of molecules, is an indispensable part of every cheminformatics or molecular processing system. Today, when a web browser has become the universal scientific user interface, a tool to edit molecules directly within the web browser is essential. One of the most popular tools for molecular structure input on the web is the JME applet. Since its release nearly 15 years ago, however the web environment has changed and Java applets are facing increasing implementation hurdles due to their maintenance and support requirements, as well as security issues. This prompted us to update the JME editor and port it to a modern Internet programming language - JavaScript. The actual molecule editing Java code of the JME editor was translated into JavaScript with help of the Google Web Toolkit compiler and a custom library that emulates a subset of the GUI features of the Java runtime environment. In this process, the editor was enhanced by additional functionalities including a substituent menu, copy/paste, drag and drop and undo/redo capabilities and an integrated help. In addition to desktop computers, the editor supports molecule editing on touch devices, including iPhone, iPad and Android phones and tablets. In analogy to JME the new editor is named JSME. This new molecule editor is compact, easy to use and easy to incorporate into web pages. A free molecule editor written in JavaScript was developed and is released under the terms of permissive BSD license. The editor is compatible with JME, has practically the same user interface as well as the web application programming interface. The JSME editor is available for download from the project web page http://peter-ertl.com/jsme/

Distributed computing for real-time petroleum reservoir monitoring

Energy Technology Data Exchange (ETDEWEB)

Ayodele, O. R. [University of Alberta, Edmonton, AB (Canada)

2004-05-01

Computer software architecture is presented to illustrate how the concept of distributed computing can be applied to real-time reservoir monitoring processes, permitting the continuous monitoring of the dynamic behaviour of petroleum reservoirs at much shorter intervals. The paper describes the fundamental technologies driving distributed computing, namely Java 2 Platform Enterprise edition (J2EE) by Sun Microsystems, and the Microsoft Dot-Net (Microsoft.Net) initiative, and explains the challenges involved in distributed computing. These are: (1) availability of permanently placed downhole equipment to acquire and transmit seismic data; (2) availability of high bandwidth to transmit the data; (3) security considerations; (4) adaptation of existing legacy codes to run on networks as downloads on demand; and (5) credibility issues concerning data security over the Internet. Other applications of distributed computing in the petroleum industry are also considered, specifically MWD, LWD and SWD (measurement-while-drilling, logging-while-drilling, and simulation-while-drilling), and drill-string vibration monitoring. 23 refs., 1 fig.

Real-Time Numerical Simulation of the Carnot Cycle

International Nuclear Information System (INIS)

Hurkala, J.; Gall, M.; Kutner, R.; Maciejczyk, M.

2005-01-01

We developed a highly interactive, multi-windows Java applet which made it possible to simulate and visualize within any platform and internet the Carnot cycle (or engine) in a real-time computer experiment. We extended our previous model and algorithm to simulate not only the heat flow but also the macroscopic movement of the piston. since in reality it is impossible to construct a reversible Carnot engine, the question arises whether it is possible to simulate it at least in a numerical experiment? The positive answer to this question which we found is related to our model and algorithm which make it possible to omit the many-body problem arising when many gas particles simultaneously interact with the mobile piston. As usually the considerations of phenomenomenological thermodynamics began with a study of the basic properties of heat engines hence our approach, beside intrinsic physical significance, is also important from the educational, technological and even environmental points of view. (author)

Real-time earthquake data feasible

Science.gov (United States)

Bush, Susan

Scientists agree that early warning devices and monitoring of both Hurricane Hugo and the Mt. Pinatubo volcanic eruption saved thousands of lives. What would it take to develop this sort of early warning and monitoring system for earthquake activity?Not all that much, claims a panel assigned to study the feasibility, costs, and technology needed to establish a real-time earthquake monitoring (RTEM) system. The panel, drafted by the National Academy of Science's Committee on Seismology, has presented its findings in Real-Time Earthquake Monitoring. The recently released report states that “present technology is entirely capable of recording and processing data so as to provide real-time information, enabling people to mitigate somewhat the earthquake disaster.” RTEM systems would consist of two parts—an early warning system that would give a few seconds warning before severe shaking, and immediate postquake information within minutes of the quake that would give actual measurements of the magnitude. At this time, however, this type of warning system has not been addressed at the national level for the United States and is not included in the National Earthquake Hazard Reduction Program, according to the report.

Integrated Java Bytecode Verification

DEFF Research Database (Denmark)

Gal, Andreas; Probst, Christian; Franz, Michael

2005-01-01

Existing Java verifiers perform an iterative data-flow analysis to discover the unambiguous type of values stored on the stack or in registers. Our novel verification algorithm uses abstract interpretation to obtain definition/use information for each register and stack location in the program...

Symbolic PathFinder: Symbolic Execution of Java Bytecode

Science.gov (United States)

Pasareanu, Corina S.; Rungta, Neha

2010-01-01

Symbolic Pathfinder (SPF) combines symbolic execution with model checking and constraint solving for automated test case generation and error detection in Java programs with unspecified inputs. In this tool, programs are executed on symbolic inputs representing multiple concrete inputs. Values of variables are represented as constraints generated from the analysis of Java bytecode. The constraints are solved using off-the shelf solvers to generate test inputs guaranteed to achieve complex coverage criteria. SPF has been used successfully at NASA, in academia, and in industry.

Advanced Hard Real-Time Operating System, the Maruti Project. Part 2.

Science.gov (United States)

1997-01-01

Real - Time Operating System , The Maruti Project DASG-60-92-C-0055 5b. Program Element # 62301E 6. Author(s...The maruti hard real - time " operating system . A CM SIGOPS, Operating Systems Review. 23:90-106, July 1989. 254 !1 110) C. L. Liu and J. Layland...February 14, 1995 Abstract The Maruti Real - Time Operating System was developed for applications that must meet hard real-time constraints. In order

Java facilities in processing XML files - JAXB and generating PDF reports

Directory of Open Access Journals (Sweden)

Danut-Octavian SIMION

2008-01-01

Full Text Available The paper presents the Java programming language facilities in working with XML files using JAXB (The Java Architecture for XML Binding technology and generating PDF reports from XML files using Java objects. The XML file can be an existing one and could contain the data about an entity (Clients for example or it might be the result of a SELECT-SQL statement. JAXB generates JAVA classes through xs rules and a Marshalling, Unmarshalling compiler. The PDF file is build from a XML file and uses XSL-FO formatting file and a Java ResultSet object.

NOAA’s Physical Oceanographic Real-Time Systems (PORTS(Registered))

Science.gov (United States)

2010-06-01

1 NOAA’s Physical Oceanographic Real - Time Systems (PORTS®) Darren Wright and Robert Bassett National Oceanic and Atmospheric Administration...operation of several Physical Oceanographic Real - Time Systems (PORTS®). 0-933957-38-1 ©2009 MTS Report Documentation Page Form ApprovedOMB No. 0704-0188...TITLE AND SUBTITLE NOAAs Physical Oceanographic Real - Time Systems (PORTS®) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6

Presentation and response timing accuracy in Adobe Flash and HTML5/JavaScript Web experiments.

Science.gov (United States)

Reimers, Stian; Stewart, Neil

2015-06-01

Web-based research is becoming ubiquitous in the behavioral sciences, facilitated by convenient, readily available participant pools and relatively straightforward ways of running experiments: most recently, through the development of the HTML5 standard. Although in most studies participants give untimed responses, there is a growing interest in being able to record response times online. Existing data on the accuracy and cross-machine variability of online timing measures are limited, and generally they have compared behavioral data gathered on the Web with similar data gathered in the lab. For this article, we took a more direct approach, examining two ways of running experiments online-Adobe Flash and HTML5 with CSS3 and JavaScript-across 19 different computer systems. We used specialist hardware to measure stimulus display durations and to generate precise response times to visual stimuli in order to assess measurement accuracy, examining effects of duration, browser, and system-to-system variability (such as across different Windows versions), as well as effects of processing power and graphics capability. We found that (a) Flash and JavaScript's presentation and response time measurement accuracy are similar; (b) within-system variability is generally small, even in low-powered machines under high load; (c) the variability of measured response times across systems is somewhat larger; and (d) browser type and system hardware appear to have relatively small effects on measured response times. Modeling of the effects of this technical variability suggests that for most within- and between-subjects experiments, Flash and JavaScript can both be used to accurately detect differences in response times across conditions. Concerns are, however, noted about using some correlational or longitudinal designs online.

Activity, exposure rate and spectrum prediction with Java programming

International Nuclear Information System (INIS)

Sahin, D.; Uenlue, K.

2009-01-01

In order to envision the radiation exposure during Neutron Activation Analysis (NAA) experiments, a software called Activity Predictor is developed using Java TM programming language. The Activity Predictor calculates activities, exposure rates and gamma spectra of activated samples for NAA experiments performed at Radiation Science and Engineering Center (RSEC), Penn State Breazeale Reactor (PSBR). The calculation procedure for predictions involves both analytical and Monte Carlo methods. The Activity Predictor software is validated with a series of activation experiments. It has been found that Activity Predictor software calculates the activities and exposure rates precisely. The software also predicts gamma spectrum for each measurement. The predicted spectra agreed partially with measured spectra. The error in net photo peak areas varied from 4.8 to 51.29%, which is considered to be due to simplistic modeling, statistical fluctuations and unknown contaminants in the samples. (author)

Real-time observation of coadsorption layers on Ru(001) using a temperature-programmed ESDIAD/TOF system

Science.gov (United States)

Sasaki, T.; Itai, Y.; Iwasawa, Y.

1997-11-01

For the purpose of utilizing ESDIAD as a real-time probe for surface processes, we have developed an instrument which can measure ESDIAD images and time of flight (TOF) spectra of desorbing ions in temperature-programmed surface processes. TOF measurements are carried out to identify the mass and to determine the kinetic energy distribution of the desorbed ions. This temperature-programmed (TP-) ESDIAD/TOF system was used to observe coadsorption layers of methylamine and CO on Ru(001) which have been previously studied by our group using LEED, TPD and HREELS, also drawing upon a comparison of findings with the coadsorption system of CO and ammonia. ESDIAD images acquired for temperature-programmed surface processes in real time were found to provide new insight into the dynamic behaviour of the coadsorption layers. As to the pure adsorption of ammonia and methylamine, the second and the first (chemisorbed) layers can be easily discriminated in their different ESD detection efficiency due to the difference in neutralization rate. The intensity change of H + ions with temperature shows the process of the decomposition of methylamine to be dependent on CO coverage. The intensity of O + originating from CO changes due to the change of CO adsorption site in the reaction process. The angular distribution of H + ions which correspond to CH2NH…Ru species appears at 250-300 K in the presence of high CO pre-coverage.

JavaScript bible

CERN Document Server

Goodman, Danny; Novitski, Paul; Rayl, Tia Gustaffl

2009-01-01

The bestselling JavaScript reference, now updated to reflect changes in technology and best practices. As the most comprehensive book on the market, the JavaScript Bible is a classic bestseller that keeps you up to date on the latest changes in JavaScript, the leading technology for incorporating interactivity into Web pages. Part tutorial, part reference, this book serves as both a learning tool for building new JavaScript skills as well as a detailed reference for the more experienced JavaScript user. You'll get up-to-date coverage on the latest JavaScript practices that have been implemente

Begining Java EE 7

CERN Document Server

Gonclaves, Antonio

2013-01-01

Java Enterprise Edition (Java EE) continues to be one of the leading Java technologies and platforms. Beginning Java EE 7 is the first tutorial book on Java EE 7. Step by step and easy to follow, this book describes many of the Java EE 7 specifications and reference implementations, and shows them in action using practical examples. This definitive book also uses the newest version of GlassFish to deploy and administer the code examples. Written by an expert member of the Java EE specification request and review board in the Java Community Process (JCP), this book contains the best information possible, from an expert’s perspective on enterprise Java technologies.

Ocean Wireless Networking and Real Time Data Management

Science.gov (United States)

Berger, J.; Orcutt, J. A.; Vernon, F. L.; Braun, H. W.; Rajasekar, A.

2001-12-01

Recent advances in technology have enabled the exploitation of satellite communications for high-speed (> 64 kbps) duplex communications with oceanographic ships at sea. Furthermore, decreasing costs for high-speed communications have made possible continuous connectivity to the global Internet for delivery of data ashore and communications with scientists and engineers on the ship. Through support from the Office of Naval Research, we have planned a series of tests using the R/V Revelle for real time data delivery of large quantities of underway data (e.g. continuous multibeam profiling) to shore for quality control, archiving, and real-time data availability. The Cecil H. and Ida M. Green Institute of Geophysics and Planetary Physics (IGPP) and the San Diego Supercomputer Center (SDSC) were funded by the NSF Information Technology Research (ITR) Program, the California Institute for Telecommunications and Information Technology [Cal-(IT)2] and the Scripps Institution of Oceanography for research entitled: "Exploring the Environment in Time: Wireless Networks & Real-Time Management." We will describe the technology to be used for the real-time seagoing experiment and the planned expansion of the project through support from the ITR grant. The short-term goal is to exercise the communications system aboard ship in various weather conditions and sea states while testing and developing the real-time data quality control and archiving methodology. The long-term goal is to enable continuous observations in the ocean, specifically supporting the goals of the DEOS (Dynamics of Earth and Ocean Systems) observatory program supported through a NSF Major Research Equipment (MRE) program - a permanent presence in the oceans. The impact on scientific work aboard ships, however, is likely to be fundamental. It will be possible to go to sea in the future with limited engineering capability for scientific operations by allowing shore-based quality control of data collected and

Real time falling leaves

OpenAIRE

Vázquez Alcocer, Pere Pau; Balsa, Marcos

2007-01-01

There is a growing interest in simulating natural phenomena in computer graphics applications. Animating natural scenes in real time is one of the most challenging problems due to the inherent complexity of their structure, formed by millions of geometric entities, and the interactions that happen within. An example of natural scenario that is needed for games or simulation programs are forests. Forests are difficult to render because the huge amount of geometric entities and the large amount...

JavaScript Pocket Reference

CERN Document Server

Flanagan, David

1998-01-01

JavaScript is a powerful, object-based scripting language that can be embedded directly in HTML pages. It allows you to create dynamic, interactive Web-based applications that run completely within a Web browser -- JavaScript is the language of choice for developing Dynamic HTML (DHTML) content. JavaScript can be integrated effectively with CGI and Java to produce sophisticated Web applications, although, in many cases, JavaScript eliminates the need for complex CGI scripts and Java applets altogether. The JavaScript Pocket Reference is a companion volume to JavaScript: The Definitive Guide

GyroBoy – a self-balancing robot programmed in JAVA with leJOS EV3

DEFF Research Database (Denmark)

Christensen, Bjørn Klint

GyroBoy is a self-balancing robot created by LEGO as a demonstration of what you can build with the EV3 LEGO Mindstorms education kit. The kit includes building instructions as well as a control program for GyroBoy developed in LEGO´s so called block-programming language. In this article I will p...... will present a similar control program developed in Java using the leJOS EV3 class library.......GyroBoy is a self-balancing robot created by LEGO as a demonstration of what you can build with the EV3 LEGO Mindstorms education kit. The kit includes building instructions as well as a control program for GyroBoy developed in LEGO´s so called block-programming language. In this article I...

VEST: An Aspect-Based Composition Tool for Real-Time Systems

Science.gov (United States)

2003-01-01

VEST: An Aspect-Based Composition Tool for Real - Time Systems * John A. Stankovic Ruiqing Zhu Ram Poornalingam Chenyang Lu Zhendong Yu Marty Humphrey...Composition Tool for Real - Time Systems 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK...it is obvious that designers of embedded real - time systems face many difficult problems. By working through various product scenarios with avionics

Safety-critical Java for low-end embedded platforms

DEFF Research Database (Denmark)

Søndergaard, Hans; Korsholm, Stephan E.; Ravn, Anders Peter

2012-01-01

We present an implementation of the Safety-Critical Java profile (SCJ), targeted for low-end embedded platforms with as little as 16 kB RAM and 256 kB flash. The distinctive features of the implementation are a combination of a lean Java virtual machine (HVM), with a bare metal kernel implementing...... hardware objects, first level interrupt handlers, and native variables, and an infrastructure written in Java which is minimized through program specialization. The HVM allows the implementation to be easily ported to embedded platforms which have a C compiler as part of the development environment...

Secure Refactoring with Java Information Flow

DEFF Research Database (Denmark)

Helke, Steffen; Kammüunietd kller, Florian; Probst, Christian W.

2016-01-01

Refactoring means that a program is changed without changing its behaviour from an observer's point of view. Does the change of behaviour also imply that the security of the program is not affected by the changes? Using Myers and Liskov's distributed information flow control model DLM and its Java...

Main real time software for high-energy physics experiments

International Nuclear Information System (INIS)

Tikhonov, A.N.

1985-01-01

The general problems of organization of software complexes, as well as development of typical algorithms and packages of applied programs for real time systems used in experiments with charged particle accelerators are discussed. It is noted that numerous qualitatively different real time tasks are solved by parallel programming of the processes of data acquisition, equipment control, data exchange with remote terminals, data express processing and accumulation, operator's instruction interpretation, generation and buffering of resulting files for data output and information processing which is realized on the basis of multicomputer system utilization. Further development of software for experiments is associated with improving the algorithms for automatic recognition and analysis of events with complex topology and standardization of applied program packages

Hard real-time multibody simulations using ARM-based embedded systems

Energy Technology Data Exchange (ETDEWEB)

Pastorino, Roland, E-mail: roland.pastorino@kuleuven.be, E-mail: rpastorino@udc.es; Cosco, Francesco, E-mail: francesco.cosco@kuleuven.be; Naets, Frank, E-mail: frank.naets@kuleuven.be; Desmet, Wim, E-mail: wim.desmet@kuleuven.be [KU Leuven, PMA division, Department of Mechanical Engineering (Belgium); Cuadrado, Javier, E-mail: javicuad@cdf.udc.es [Universidad de La Coruña, Laboratorio de Ingeniería Mecánica (Spain)

2016-05-15

The real-time simulation of multibody models on embedded systems is of particular interest for controllers and observers such as model predictive controllers and state observers, which rely on a dynamic model of the process and are customarily executed in electronic control units. This work first identifies the software techniques and tools required to easily write efficient code for multibody models to be simulated on ARM-based embedded systems. Automatic Programming and Source Code Translation are the two techniques that were chosen to generate source code for multibody models in different programming languages. Automatic Programming is used to generate procedural code in an intermediate representation from an object-oriented library and Source Code Translation is used to translate the intermediate representation automatically to an interpreted language or to a compiled language for efficiency purposes. An implementation of these techniques is proposed. It is based on a Python template engine and AST tree walkers for Source Code Generation and on a model-driven translator for the Source Code Translation. The code is translated from a metalanguage to any of the following four programming languages: Python-Numpy, Matlab, C++-Armadillo, C++-Eigen. Two examples of multibody models were simulated: a four-bar linkage with multiple loops and a 3D vehicle steering system. The code for these examples has been generated and executed on two ARM-based single-board computers. Using compiled languages, both models could be simulated faster than real-time despite the low resources and performance of these embedded systems. Finally, the real-time performance of both models was evaluated when executed in hard real-time on Xenomai for both embedded systems. This work shows through measurements that Automatic Programming and Source Code Translation are valuable techniques to develop real-time multibody models to be used in embedded observers and controllers.

Hard real-time multibody simulations using ARM-based embedded systems

International Nuclear Information System (INIS)

Pastorino, Roland; Cosco, Francesco; Naets, Frank; Desmet, Wim; Cuadrado, Javier

2016-01-01

The real-time simulation of multibody models on embedded systems is of particular interest for controllers and observers such as model predictive controllers and state observers, which rely on a dynamic model of the process and are customarily executed in electronic control units. This work first identifies the software techniques and tools required to easily write efficient code for multibody models to be simulated on ARM-based embedded systems. Automatic Programming and Source Code Translation are the two techniques that were chosen to generate source code for multibody models in different programming languages. Automatic Programming is used to generate procedural code in an intermediate representation from an object-oriented library and Source Code Translation is used to translate the intermediate representation automatically to an interpreted language or to a compiled language for efficiency purposes. An implementation of these techniques is proposed. It is based on a Python template engine and AST tree walkers for Source Code Generation and on a model-driven translator for the Source Code Translation. The code is translated from a metalanguage to any of the following four programming languages: Python-Numpy, Matlab, C++-Armadillo, C++-Eigen. Two examples of multibody models were simulated: a four-bar linkage with multiple loops and a 3D vehicle steering system. The code for these examples has been generated and executed on two ARM-based single-board computers. Using compiled languages, both models could be simulated faster than real-time despite the low resources and performance of these embedded systems. Finally, the real-time performance of both models was evaluated when executed in hard real-time on Xenomai for both embedded systems. This work shows through measurements that Automatic Programming and Source Code Translation are valuable techniques to develop real-time multibody models to be used in embedded observers and controllers.

Language Based Security for Java and JML

NARCIS (Netherlands)

Warnier, M.E.

2006-01-01

Programs contain bugs. Finding program bugs is important, especially in situations where safety and security of a program is required. This thesis proposes a number of analysis methods for enforcing the absence of such bugs. In the first part of the thesis the Java Modeling Language (JML) is the

Real-Time Hand-Held Magnetometer Array

Science.gov (United States)

2016-04-01

measurements, we swung a target, pendulum-style, from the ceiling above the array. We could easily observe that the height of the target was varying... crystal oscillator clock signal. The Microblaze processor boots up with the program already present in its RAM at startup. MR-2104 Real-Time

Implementing real-time robotic systems using CHIMERA II

Science.gov (United States)

Stewart, David B.; Schmitz, Donald E.; Khosla, Pradeep K.

1990-01-01

A description is given of the CHIMERA II programming environment and operating system, which was developed for implementing real-time robotic systems. Sensor-based robotic systems contain both general- and special-purpose hardware, and thus the development of applications tends to be a time-consuming task. The CHIMERA II environment is designed to reduce the development time by providing a convenient software interface between the hardware and the user. CHIMERA II supports flexible hardware configurations which are based on one or more VME-backplanes. All communication across multiple processors is transparent to the user through an extensive set of interprocessor communication primitives. CHIMERA II also provides a high-performance real-time kernel which supports both deadline and highest-priority-first scheduling. The flexibility of CHIMERA II allows hierarchical models for robot control, such as NASREM, to be implemented with minimal programming time and effort.

Real time analysis under EDS

International Nuclear Information System (INIS)

Schneberk, D.

1985-07-01

This paper describes the analysis component of the Enrichment Diagnostic System (EDS) developed for the Atomic Vapor Laser Isotope Separation Program (AVLIS) at Lawrence Livermore National Laboratory (LLNL). Four different types of analysis are performed on data acquired through EDS: (1) absorption spectroscopy on laser-generated spectral lines, (2) mass spectrometer analysis, (3) general purpose waveform analysis, and (4) separation performance calculations. The information produced from this data includes: measures of particle density and velocity, partial pressures of residual gases, and overall measures of isotope enrichment. The analysis component supports a variety of real-time modeling tasks, a means for broadcasting data to other nodes, and a great degree of flexibility for tailoring computations to the exact needs of the process. A particular data base structure and program flow is common to all types of analysis. Key elements of the analysis component are: (1) a fast access data base which can configure all types of analysis, (2) a selected set of analysis routines, (3) a general purpose data manipulation and graphics package for the results of real time analysis. Each of these components are described with an emphasis upon how each contributes to overall system capability. 3 figs

FERN - a Java framework for stochastic simulation and evaluation of reaction networks.

Science.gov (United States)

Erhard, Florian; Friedel, Caroline C; Zimmer, Ralf

2008-08-29

Stochastic simulation can be used to illustrate the development of biological systems over time and the stochastic nature of these processes. Currently available programs for stochastic simulation, however, are limited in that they either a) do not provide the most efficient simulation algorithms and are difficult to extend, b) cannot be easily integrated into other applications or c) do not allow to monitor and intervene during the simulation process in an easy and intuitive way. Thus, in order to use stochastic simulation in innovative high-level modeling and analysis approaches more flexible tools are necessary. In this article, we present FERN (Framework for Evaluation of Reaction Networks), a Java framework for the efficient simulation of chemical reaction networks. FERN is subdivided into three layers for network representation, simulation and visualization of the simulation results each of which can be easily extended. It provides efficient and accurate state-of-the-art stochastic simulation algorithms for well-mixed chemical systems and a powerful observer system, which makes it possible to track and control the simulation progress on every level. To illustrate how FERN can be easily integrated into other systems biology applications, plugins to Cytoscape and CellDesigner are included. These plugins make it possible to run simulations and to observe the simulation progress in a reaction network in real-time from within the Cytoscape or CellDesigner environment. FERN addresses shortcomings of currently available stochastic simulation programs in several ways. First, it provides a broad range of efficient and accurate algorithms both for exact and approximate stochastic simulation and a simple interface for extending to new algorithms. FERN's implementations are considerably faster than the C implementations of gillespie2 or the Java implementations of ISBJava. Second, it can be used in a straightforward way both as a stand-alone program and within new

Coordinated scheduling for dynamic real-time systems

Science.gov (United States)

Natarajan, Swaminathan; Zhao, Wei

1994-01-01

In this project, we addressed issues in coordinated scheduling for dynamic real-time systems. In particular, we concentrated on design and implementation of a new distributed real-time system called R-Shell. The design objective of R-Shell is to provide computing support for space programs that have large, complex, fault-tolerant distributed real-time applications. In R-shell, the approach is based on the concept of scheduling agents, which reside in the application run-time environment, and are customized to provide just those resource management functions which are needed by the specific application. With this approach, we avoid the need for a sophisticated OS which provides a variety of generalized functionality, while still not burdening application programmers with heavy responsibility for resource management. In this report, we discuss the R-Shell approach, summarize the achievement of the project, and describe a preliminary prototype of R-Shell system.

Java Series: Java Essentials II Advanced Language Constructs

CERN Multimedia

CERN. Geneva

2000-01-01

This tutorial will show how Java uses important language constructs, and the set of classes typically used in common tasks. It will briefly show conditional and loops structures and then will introduce the most significative classes included in the java.util package, such as vectors, collections, enumeration, etc. It will finally explain the usage and handling of exceptions in Java.Organiser(s): M.Marquina and R.Ramos /IT-User Support

Early experience in centralized real time energy market

International Nuclear Information System (INIS)

Alaywan, Z.; Hernandez, L.; Martin, M.

2005-01-01

The current structure of the California Independent System Operator (ISO) was described. The study provided an outline of California's transition from a decentralized pool operation to a forward bilateral market through the implementation of a centralized real time market. Details of the institutional, economic and technological history of the power system were provided. Although the California real time market was implemented in order to simplify the power system, a number of operational challenges were observed. Discontinuities in the energy curve resulted in the implementation of a target price process, which aimed to resolve the overlap in energy bids. The design of the ISO's real time market did not provide a mechanism for bidders to execute real time energy trades. Regulation bidders also internalized energy in their regulation capacity bids. The real time market application (RTMA) provided the ISO with a substantial computer program to determine and account for nearly all aspects of generation unit scheduling and physical characteristics with a multiple ramp rate. The program combined optimal power flow (OPF) logic for energy flows in addition to mixed-integer nonlinear optimization of trading schedules, and system and security constraints. The RTMA used a multi-period security constrained economic dispatch (SCED) function to optimize energy dispatch schedules. Other features of the RTMA included security constrained unit commitment, security constrained economic dispatch, and dispatch schedule post processes. It was concluded that implementation of the RTMA has increased the efficiency of the ISO. A case study of the RTMA during an outage in November 2004 was provided. 5 refs., 1 tab., 2 figs

Real-time Kernel Implementation Practice Program for Embedded Software Engineers' Education and its Evaluation

Science.gov (United States)

Yoshida, Toshio; Matsumoto, Masahide; Seo, Katsuhiko; Chino, Shinichiro; Sugino, Eiji; Sawamoto, Jun; Koizumi, Hisao

A real-time kernel (henceforth RTK) is in the center place of embedded software technology, and the understanding of RTK is indispensable for the embedded system design. To implement RTK, it is necessary to understand languages that describe RTK software program code, system programming manners, software development tools, CPU on that RTK runs and the interface between software and hardware, etc. in addition to understanding of RTK itself. This means RTK implementation process largely covers embedded software implementation process. Therefore, it is thought that RTK implementation practice program is very effective as a means of the acquisition of common embedded software skill in addition to deeper acquisition of RTK itself. In this paper, we propose to apply RTK implementing practice program to embedded software engineers educational program. We newly developed very small and step-up type RTK named μK for educational use, and held a seminar that used μK as a teaching material for the students of information science and engineers of the software house. As a result, we confirmed that RTK implementation practice program is very effective for the acquisition of embedded software common skill.

Java EE 7 handbook

CERN Document Server

Pilgrim, Peter A

2013-01-01

Java EE 7 Handbook is an example based tutorial with descriptions and explanations.""Java EE 7 Handbook"" is for the developer, designer, and architect aiming to get acquainted with the Java EE platform in its newest edition. This guide will enhance your knowledge about the Java EE 7 platform. Whether you are a long-term Java EE (J2EE) developer or an intermediate level engineer on the JVM with just Java SE behind you, this handbook is for you, the new contemporary Java EE 7 developer!

Supercharged JavaScript Graphics with HTML5 canvas, jQuery, and More

CERN Document Server

Cecco, Raffaele

2011-01-01

With HTML5 and improved web browser support, JavaScript has become the tool of choice for creating high-performance web graphics. This faced-paced book shows you how to use JavaScript, jQuery, DHTML, and HTML5's Canvas element to create rich web applications for computers and mobile devices. By following real-world examples, experienced web developers learn fun and useful approaches to arcade games, DHTML effects, business dashboards, and other applications. This book serves complex subjects in easily digestible pieces, and each topic acts as a foundation for the next. Tackle JavaScript opti

Influence of season, harvest time and drying on Java citronella (Cymbopogon winterianus Jowitt volatile oil

Directory of Open Access Journals (Sweden)

Arie F. Blank

Full Text Available Java citronella (Cymbopogon winterianus Jowitt is member of the Poaceae family. Java citronella volatile oil has been reported to be among the volatile oils, showing repellent, antimycotic, and acaricide activities. It has been known that agronomical factors have a great effect on both the quality and quantity of essential metabolites. For this reason, it is necessary to determine optimum levels of agronomical factors affecting plant growth and production. Harvest time and drying are very important agronomical factors. This study has been conducted in the Research farm of the " Universidade Federal de Sergipe" , Agronomical Engineering Department along 2002-2003 on the base of factorial experiment in randomized complete block design with three replications. Java citronella was cultivated in a 60 x 60 cm space. Early, midday, and late harvest at 9:00 h, 12:00 h, and 15:00 h were conducted on four different seasons. Fresh and dried leaves were used on the experiments. In order to study the effects of harvest time and drying, yields of dry and fresh herbage (kg/ha, moisture content (%, volatile oil content (% and yield (L/ha, and chemical composition of the volatile oil were measured. Seasonal changes had significant effect on yield of fresh herbage, yield and volatile oil content. Maximum volatile oil yields were observed at 9:00 during summer, winter, and spring. Volatile oil content was influenced by season and drying, but not influenced by harvest time.

Safety-critical Java on a Java processor

DEFF Research Database (Denmark)

Schoeberl, Martin; Rios Rivas, Juan Ricardo

2012-01-01

The safety-critical Java (SCJ) specification is developed within the Java Community Process under specification request number JSR 302. The specification is available as public draft, but details are still discussed by the expert group. In this stage of the specification we need prototype...... implementations of SCJ and first test applications that are written with SCJ, even when the specification is not finalized. The feedback from those prototype implementations is needed for final decisions. To help the SCJ expert group, a prototype implementation of SCJ on top of the Java optimized processor...

Remote Laboratory Java Server Based on JACOB Project

Directory of Open Access Journals (Sweden)

Pavol Bisták

2011-02-01

Full Text Available Remote laboratories play an important role in the educational process of engineers. This paper deals with the structure of remote laboratories. The principle of the proposed remote laboratory structure is based on the Java server application that communicates with Matlab through the COM technology for the data exchange under the Windows operating system. Java does not support COM directly so the results of the JACOB project are used and modified to cope with this problem. In laboratories for control engineering education a control algorithm usually runs on a PC with Matlab that really controls the real plant. This is the server side described in the paper in details. To demonstrate the possibilities of a remote control a Java client server application is also introduced. It covers communication and offers a user friendly interface for the control of a remote plant and visualization of measured data.

CAL3JHH: a Java program to calculate the vicinal coupling constants (3J H,H) of organic molecules.

Science.gov (United States)

Aguirre-Valderrama, Alonso; Dobado, José A

2008-12-01

Here, we present a free web-accessible application, developed in the JAVA programming language for the calculation of vicinal coupling constant (3J(H,H)) of organic molecules with the H-Csp3-Csp3-H fragment. This JAVA applet is oriented to assist chemists in structural and conformational analyses, allowing the user to calculate the averaged 3J(H,H) values among conformers, according to its Boltzmann populations. Thus, the CAL3JHH program uses the Haasnoot-Leeuw-Altona equation, and, by reading the molecule geometry from a protein data bank (PDB) file format or from multiple pdb files, automatically detects all the coupled hydrogens, evaluating the data needed for this equation. Moreover, a "Graphical viewer" menu allows the display of the results on the 3D molecule structure, as well as the plotting of the Newman projection for the couplings.

Embedded and real-time operating systems

CERN Document Server

Wang, K C

2017-01-01

This book covers the basic concepts and principles of operating systems, showing how to apply them to the design and implementation of complete operating systems for embedded and real-time systems. It includes all the foundational and background information on ARM architecture, ARM instructions and programming, toolchain for developing programs, virtual machines for software implementation and testing, program execution image, function call conventions, run-time stack usage and link C programs with assembly code. It describes the design and implementation of a complete OS for embedded systems in incremental steps, explaining the design principles and implementation techniques. For Symmetric Multiprocessing (SMP) embedded systems, the author examines the ARM MPcore processors, which include the SCU and GIC for interrupts routing and interprocessor communication and synchronization by Software Generated Interrupts (SGIs). Throughout the book, complete working sample systems demonstrate the design principles and...

Building interactive virtual environments for simulated training in medicine using VRML and Java/JavaScript.

Science.gov (United States)

Korocsec, D; Holobar, A; Divjak, M; Zazula, D

2005-12-01

Medicine is a difficult thing to learn. Experimenting with real patients should not be the only option; simulation deserves a special attention here. Virtual Reality Modelling Language (VRML) as a tool for building virtual objects and scenes has a good record of educational applications in medicine, especially for static and animated visualisations of body parts and organs. However, to create computer simulations resembling situations in real environments the required level of interactivity and dynamics is difficult to achieve. In the present paper we describe some approaches and techniques which we used to push the limits of the current VRML technology further toward dynamic 3D representation of virtual environments (VEs). Our demonstration is based on the implementation of a virtual baby model, whose vital signs can be controlled from an external Java application. The main contributions of this work are: (a) outline and evaluation of the three-level VRML/Java implementation of the dynamic virtual environment, (b) proposal for a modified VRML Timesensor node, which greatly improves the overall control of system performance, and (c) architecture of the prototype distributed virtual environment for training in neonatal resuscitation comprising the interactive virtual newborn, active bedside monitor for vital signs and full 3D representation of the surgery room.

Protected Objects in Java

DEFF Research Database (Denmark)

Løvengreen, Hans Henrik; Schwarzer, Jens Christian

1998-01-01

We present an implementation of Ada 95's notion of protected objects in Java. The implementation comprises a class library supporting entry queues and a (pre-) compiler translating slightly decorated Java classes to pure Java classes utilizing the library.......We present an implementation of Ada 95's notion of protected objects in Java. The implementation comprises a class library supporting entry queues and a (pre-) compiler translating slightly decorated Java classes to pure Java classes utilizing the library....

Java SOA Cookbook

CERN Document Server

Hewitt, Eben

2009-01-01

Java SOA Cookbook offers practical solutions and advice to programmers charged with implementing a service-oriented architecture (SOA) in their organization. Instead of providing another conceptual, high-level view of SOA, this cookbook shows you how to make SOA work. It's full of Java and XML code you can insert directly into your applications and recipes you can apply right away. The book focuses primarily on the use of free and open source Java Web Services technologies -- including Java SE 6 and Java EE 5 tools -- but you'll find tips for using commercially available tools as well. Jav

A curriculum for real-time computer and control systems engineering

Science.gov (United States)

Halang, Wolfgang A.

1990-01-01

An outline of a syllabus for the education of real-time-systems engineers is given. This comprises the treatment of basic concepts, real-time software engineering, and programming in high-level real-time languages, real-time operating systems with special emphasis on such topics as task scheduling, hardware architectures, and especially distributed automation structures, process interfacing, system reliability and fault-tolerance, and integrated project development support systems. Accompanying course material and laboratory work are outlined, and suggestions for establishing a laboratory with advanced, but low-cost, hardware and software are provided. How the curriculum can be extended into a second semester is discussed, and areas for possible graduate research are listed. The suitable selection of a high-level real-time language and supporting operating system for teaching purposes is considered.

Formalizing the Safety of Java, the Java Virtual Machine and Java Card

NARCIS (Netherlands)

Hartel, Pieter H.; Moreau, Luc

2001-01-01

We review the existing literature on Java safety, emphasizing formal approaches, and the impact of Java safety on small footprint devices such as smart cards. The conclusion is that while a lot of good work has been done, a more concerted effort is needed to build a coherent set of machine readable

A development methodology for a remote inspection system with JAVA and socket

International Nuclear Information System (INIS)

Choi, Yoo Rark; Lee, Jae Cheol; Kim, Jae Hee

2004-01-01

We have developed RISYS (Reactor Inspection System) which inspects reactor vessel welds by an underwater mobile robot. The system consists of a main control computer and an inspection robot which is controlled by the main control computer. Since the environments of the inspection tasks in a nuclear plant, like in other industrial fields, is very poor, serious accidents often happen. Therefore the necessity for remote inspection and control system has increased more and more. We have carried out the research for a remote inspection model for RISYS, and have adopted the world wide web, java, and socket technologies for it. Client interface to access the main control computer that controls the inspection equipment is essential for the development of a remote inspection system. It has been developed with a traditional programming language, for example, Visual C++, Visual Basic and X-Window. However, it is too expensive to vend and maintain the version of a interface program because of the different computer O/S. Nevertheless web and java technologies come to the fore to solve the problems but the java interpreting typed language could incur a performance problem in operating the remote inspection system. We suggest a methodology for developing a remote inspection system with java, a traditional programming language, and a socket programming that solves the java performance problem in this paper

Real time animation of space plasma phenomena

International Nuclear Information System (INIS)

Jordan, K.F.; Greenstadt, E.W.

1987-01-01

In pursuit of real time animation of computer simulated space plasma phenomena, the code was rewritten for the Massively Parallel Processor (MPP). The program creates a dynamic representation of the global bowshock which is based on actual spacecraft data and designed for three dimensional graphic output. This output consists of time slice sequences which make up the frames of the animation. With the MPP, 16384, 512 or 4 frames can be calculated simultaneously depending upon which characteristic is being computed. The run time was greatly reduced which promotes the rapid sequence of images and makes real time animation a foreseeable goal. The addition of more complex phenomenology in the constructed computer images is now possible and work proceeds to generate these images

Pro Java ME Apps

CERN Document Server

Iliescu, Ovidiu

2011-01-01

Pro Java ME Apps gives you, the developer, the know-how required for writing sophisticated Java ME applications and for taking advantage of this huge potential market. Java ME is the largest mobile software platform in the world, supported by over 80% of all phones. You'll cover what Java ME is and how it compares to other mobile software platforms, how to properly design and structure Java ME applications, how to think like an experienced Java ME developer, what common problems and pitfalls you may run into, how to optimize your code, and many other key topics. Unlike other Java ME books out

Real-Time Monitoring and Evaluation of a Visual-Based Cervical Cancer Screening Program Using a Decision Support Job Aid

Directory of Open Access Journals (Sweden)

Curtis W. Peterson

2016-05-01

Full Text Available In many developing nations, cervical cancer screening is done by visual inspection with acetic acid (VIA. Monitoring and evaluation (M&E of such screening programs is challenging. An enhanced visual assessment (EVA system was developed to augment VIA procedures in low-resource settings. The EVA System consists of a mobile colposcope built around a smartphone, and an online image portal for storing and annotating images. A smartphone app is used to control the mobile colposcope, and upload pictures to the image portal. In this paper, a new app feature that documents clinical decisions using an integrated job aid was deployed in a cervical cancer screening camp in Kenya. Six organizations conducting VIA used the EVA System to screen 824 patients over the course of a week, and providers recorded their diagnoses and treatments in the application. Real-time aggregated statistics were broadcast on a public website. Screening organizations were able to assess the number of patients screened, alongside treatment rates, and the patients who tested positive and required treatment in real time, which allowed them to make adjustments as needed. The real-time M&E enabled by “smart” diagnostic medical devices holds promise for broader use in screening programs in low-resource settings.

Real-Time Monitoring and Evaluation of a Visual-Based Cervical Cancer Screening Program Using a Decision Support Job Aid.

Science.gov (United States)

Peterson, Curtis W; Rose, Donny; Mink, Jonah; Levitz, David

2016-05-16

In many developing nations, cervical cancer screening is done by visual inspection with acetic acid (VIA). Monitoring and evaluation (M&E) of such screening programs is challenging. An enhanced visual assessment (EVA) system was developed to augment VIA procedures in low-resource settings. The EVA System consists of a mobile colposcope built around a smartphone, and an online image portal for storing and annotating images. A smartphone app is used to control the mobile colposcope, and upload pictures to the image portal. In this paper, a new app feature that documents clinical decisions using an integrated job aid was deployed in a cervical cancer screening camp in Kenya. Six organizations conducting VIA used the EVA System to screen 824 patients over the course of a week, and providers recorded their diagnoses and treatments in the application. Real-time aggregated statistics were broadcast on a public website. Screening organizations were able to assess the number of patients screened, alongside treatment rates, and the patients who tested positive and required treatment in real time, which allowed them to make adjustments as needed. The real-time M&E enabled by "smart" diagnostic medical devices holds promise for broader use in screening programs in low-resource settings.

Research and application of embedded real-time operating system

Science.gov (United States)

Zhang, Bo

2013-03-01

In this paper, based on the analysis of existing embedded real-time operating system, the architecture of an operating system is designed and implemented. The experimental results show that the design fully complies with the requirements of embedded real-time operating system, can achieve the purposes of reducing the complexity of embedded software design and improving the maintainability, reliability, flexibility. Therefore, this design program has high practical value.

A numerical library in Java for scientists and engineers

CERN Document Server

Lau, Hang T

2003-01-01

At last researchers have an inexpensive library of Java-based numeric procedures for use in scientific computation. The first and only book of its kind, A Numeric Library in Java for Scientists and Engineers is a translation into Java of the library NUMAL (NUMerical procedures in ALgol 60). This groundbreaking text presents procedural descriptions for linear algebra, ordinary and partial differential equations, optimization, parameter estimation, mathematical physics, and other tools that are indispensable to any dynamic research group. The book offers test programs that allow researchers to execute the examples provided; users are free to construct their own tests and apply the numeric procedures to them in order to observe a successful computation or simulate failure. The entry for each procedure is logically presented, with name, usage parameters, and Java code included. This handbook serves as a powerful research tool, enabling the performance of critical computations in Java. It stands as a cost-effi...

JVM: Java Visual Mapping tool for next generation sequencing read.

Science.gov (United States)

Yang, Ye; Liu, Juan

2015-01-01

We developed a program JVM (Java Visual Mapping) for mapping next generation sequencing read to reference sequence. The program is implemented in Java and is designed to deal with millions of short read generated by sequence alignment using the Illumina sequencing technology. It employs seed index strategy and octal encoding operations for sequence alignments. JVM is useful for DNA-Seq, RNA-Seq when dealing with single-end resequencing. JVM is a desktop application, which supports reads capacity from 1 MB to 10 GB.

REAL-TIME CONTROL OF COMBINED SEWER NETWORKS

Science.gov (United States)

Real-time control (RTC) is a custom-designed management program for a specific urban sewerage system during a wet-weather event. The function of RTC is to assure efficient operation of the sewerage system and maximum utilization of existing storage capacity, either to fully conta...

Present and future aspects of PROSA - A computer program for near real time accountancy

International Nuclear Information System (INIS)

Beedgen, R.

1987-01-01

The methods of near real time accountancy (NRTA) for safeguarding nuclear material received a lot of attention in the last years. They developed PROSA 1.0 as a computer program to evaluate a sequence of material balance data based on three statistical tests for a selected false alarm probability. A new NRTA test procedure will be included and an option for the calculation of detection probabilities of hypothetical loss patterns will be made available in future releases of PROSA. Under a non-loss assumption, PROSA may also be used for the analysis of facility measurement models

JPLEX: Java Simplex Implementation with Branch-and-Bound Search for Automated Test Assembly

Science.gov (United States)

Park, Ryoungsun; Kim, Jiseon; Dodd, Barbara G.; Chung, Hyewon

2011-01-01

JPLEX, short for Java simPLEX, is an automated test assembly (ATA) program. It is a mixed integer linear programming (MILP) solver written in Java. It reads in a configuration file, solves the minimization problem, and produces an output file for postprocessing. It implements the simplex algorithm to create a fully relaxed solution and…

Real-time shadows

CERN Document Server

Eisemann, Elmar; Assarsson, Ulf; Wimmer, Michael

2011-01-01

Important elements of games, movies, and other computer-generated content, shadows are crucial for enhancing realism and providing important visual cues. In recent years, there have been notable improvements in visual quality and speed, making high-quality realistic real-time shadows a reachable goal. Real-Time Shadows is a comprehensive guide to the theory and practice of real-time shadow techniques. It covers a large variety of different effects, including hard, soft, volumetric, and semi-transparent shadows.The book explains the basics as well as many advanced aspects related to the domain

Advanced Hard Real-Time Operating System, The Maruti Project. Part 1.

Science.gov (United States)

1997-01-01

REAL - TIME OPERATING SYSTEM , THE MARUTI PROJECT Part 1 of 2 Ashok K. Agrawala Satish K. Tripathi Department of Computer Science University of Maryland...Hard Real - Time Operating System , The Maruti Project DASG-60-92-C-0055 5b. Program Element # 62301E 6. Author(s) 5c. Project # DRPB Ashok K. Agrawala...SdSA94), a real - time operating system developed at the I3nversity of Maryland, and conducted extensive experiments under various task

Dependable Real-Time Systems

Science.gov (United States)

1991-09-30

0196 or 413 545-0720 PI E-mail Address: krithi@nirvan.cs.umass.edu, stankovic(ocs.umass.edu Grant or Contract Title: Dependable Real - Time Systems Grant...Dependable Real - Time Systems " Grant or Contract Number: N00014-85-k-0398 L " Reporting Period: 1 Oct 87 - 30 Sep 91 , 2. Summary of Accomplishments ’ 2.1 Our...in developing a sound approach to scheduling tasks in complex real - time systems , (2) developed a real-time operating system kernel, a preliminary

The Strategy of KPID West Java in Socializing Media Literacy

Directory of Open Access Journals (Sweden)

Lucy Pujasari Supratman

2017-07-01

Full Text Available The socialization strategy of media literacy which has done by KPID West Java (Regional-Indonesia Broadcasting Commission aims to strengthen national integration, national identity, and educate the nation. This study focused on the strategies of KPID West Java as an independent institution of the state in disseminating a variety of media literacy programs that have been run by the West Java KPID period 2015-2018 to promote media literacy. The author used a descriptive case study method. In this study, a case to be analyzed is in how KPID West Java disseminated the media literacy. The essence of media literacy conducted by KPID West Java is to grow the wise society in gratification media and to encourage the broadcaster’s institution to produce quality broadcasting content. KPID West Java as a representative of the public continues to call for media literacy socialization which is harder to be censored if there is no public participation in reporting a content violation. This form of socialization by using new media approach encourage KPID West Java Period 2015-2018 to develop steps of innovative media literacy along with the technology development.

FPGA Implementation of Real-Time Ethernet for Motion Control

Directory of Open Access Journals (Sweden)

Chen Youdong

2013-01-01

Full Text Available This paper provides an applicable implementation of real-time Ethernet named CASNET, which modifies the Ethernet medium access control (MAC to achieve the real-time requirement for motion control. CASNET is the communication protocol used for motion control system. Verilog hardware description language (VHDL has been used in the MAC logic design. The designed MAC serves as one of the intellectual properties (IPs and is applicable to various industrial controllers. The interface of the physical layer is RJ45. The other layers have been implemented by using C programs. The real-time Ethernet has been implemented by using field programmable gate array (FPGA technology and the proposed solution has been tested through the cycle time, synchronization accuracy, and Wireshark testing.

Concepts of real time and semi-real time material control

International Nuclear Information System (INIS)

Lovett, J.E.

1975-01-01

After a brief consideration of the traditional material balance accounting on an MBA basis, this paper explores the basic concepts of real time and semi-real time material control, together with some of the major problems to be solved. Three types of short-term material control are discussed: storage, batch processing, and continuous processing. (DLC)

Real time expert systems

International Nuclear Information System (INIS)

Asami, Tohru; Hashimoto, Kazuo; Yamamoto, Seiichi

1992-01-01

Recently, aiming at the application to the plant control for nuclear reactors and traffic and communication control, the research and the practical use of the expert system suitable to real time processing have become conspicuous. In this report, the condition for the required function to control the object that dynamically changes within a limited time is presented, and the technical difference between the real time expert system developed so as to satisfy it and the expert system of conventional type is explained with the actual examples and from theoretical aspect. The expert system of conventional type has the technical base in the problem-solving equipment originating in STRIPS. The real time expert system is applied to the fields accompanied by surveillance and control, to which conventional expert system is hard to be applied. The requirement for the real time expert system, the example of the real time expert system, and as the techniques of realizing real time processing, the realization of interruption processing, dispersion processing, and the mechanism of maintaining the consistency of knowledge are explained. (K.I.)

Towards high performance processing in modern Java-based control systems

International Nuclear Information System (INIS)

Misiowiec, M.; Buczak, W.; Buttner, M.

2012-01-01

CERN controls software is often developed on Java foundation. Some systems carry out a combination of data, network and processor intensive tasks within strict time limits. Hence, there is a demand for high performing, quasi real time solutions. The system must handle dozens of thousands of data samples every second, along its three tiers, applying complex computations throughout. To accomplish the goal, a deep understanding of multi-threading, memory management and inter process communication was required. There are unexpected traps hidden behind an excessive use of 64 bit memory or severe impact on the processing flow of modern garbage collectors. Tuning JVM configuration significantly affects the execution of the code. Even more important is the amount of threads and the data structures used between them. Accurately dividing work into independent tasks might boost system performance. Thorough profiling with dedicated tools helped understand the bottlenecks and choose algorithmically optimal solutions. Different virtual machines were tested, in a variety of setups and garbage collection options. The overall work provided for discovering actual hard limits of the whole setup. We present this process of designing a challenging system in view of the characteristics and limitations of the contemporary Java run-time environment. (authors)

A class of kernel based real-time elastography algorithms.

Science.gov (United States)

Kibria, Md Golam; Hasan, Md Kamrul

2015-08-01

In this paper, a novel real-time kernel-based and gradient-based Phase Root Seeking (PRS) algorithm for ultrasound elastography is proposed. The signal-to-noise ratio of the strain image resulting from this method is improved by minimizing the cross-correlation discrepancy between the pre- and post-compression radio frequency signals with an adaptive temporal stretching method and employing built-in smoothing through an exponentially weighted neighborhood kernel in the displacement calculation. Unlike conventional PRS algorithms, displacement due to tissue compression is estimated from the root of the weighted average of the zero-lag cross-correlation phases of the pair of corresponding analytic pre- and post-compression windows in the neighborhood kernel. In addition to the proposed one, the other time- and frequency-domain elastography algorithms (Ara et al., 2013; Hussain et al., 2012; Hasan et al., 2012) proposed by our group are also implemented in real-time using Java where the computations are serially executed or parallely executed in multiple processors with efficient memory management. Simulation results using finite element modeling simulation phantom show that the proposed method significantly improves the strain image quality in terms of elastographic signal-to-noise ratio (SNRe), elastographic contrast-to-noise ratio (CNRe) and mean structural similarity (MSSIM) for strains as high as 4% as compared to other reported techniques in the literature. Strain images obtained for the experimental phantom as well as in vivo breast data of malignant or benign masses also show the efficacy of our proposed method over the other reported techniques in the literature. Copyright © 2015 Elsevier B.V. All rights reserved.

Spike-train acquisition, analysis and real-time experimental control using a graphical programming language (LabView).

Science.gov (United States)

Nordstrom, M A; Mapletoft, E A; Miles, T S

1995-11-01

A solution is described for the acquisition on a personal computer of standard pulses derived from neuronal discharge, measurement of neuronal discharge times, real-time control of stimulus delivery based on specified inter-pulse interval conditions in the neuronal spike train, and on-line display and analysis of the experimental data. The hardware consisted of an Apple Macintosh IIci computer and a plug-in card (National Instruments NB-MIO16) that supports A/D, D/A, digital I/O and timer functions. The software was written in the object-oriented graphical programming language LabView. Essential elements of the source code of the LabView program are presented and explained. The use of the system is demonstrated in an experiment in which the reflex responses to muscle stretch are assessed for a single motor unit in the human masseter muscle.

Design a Fault Tolerance for Real Time Distributed System

OpenAIRE

Ban M. Khammas

2012-01-01

This paper designed a fault tolerance for soft real time distributed system (FTRTDS). This system is designed to be independently on specific mechanisms and facilities of the underlying real time distributed system. It is designed to be distributed on all the computers in the distributed system and controlled by a central unit.Besides gathering information about a target program spontaneously, it provides information about the target operating system and the target hardware in order to diagno...

JavaScript Patterns

CERN Document Server

Stefanov, Stoyan

2010-01-01

What's the best approach for developing an application with JavaScript? This book helps you answer that question with numerous JavaScript coding patterns and best practices. If you're an experienced developer looking to solve problems related to objects, functions, inheritance, and other language-specific categories, the abstractions and code templates in this guide are ideal -- whether you're writing a client-side, server-side, or desktop application with JavaScript. Written by JavaScript expert Stoyan Stefanov -- Senior Yahoo! Technical and architect of YSlow 2.0, the web page performance

JavaScript Access to DICOM Network and Objects in Web Browser.

Science.gov (United States)

Drnasin, Ivan; Grgić, Mislav; Gogić, Goran

2017-10-01

Digital imaging and communications in medicine (DICOM) 3.0 standard provides the baseline for the picture archiving and communication systems (PACS). The development of Internet and various communication media initiated demand for non-DICOM access to PACS systems. Ever-increasing utilization of the web browsers, laptops and handheld devices, as opposed to desktop applications and static organizational computers, lead to development of different web technologies. The DICOM standard officials accepted those subsequently as tools of alternative access. This paper provides an overview of the current state of development of the web access technology to the DICOM repositories. It presents a different approach of using HTML5 features of the web browsers through the JavaScript language and the WebSocket protocol by enabling real-time communication with DICOM repositories. JavaScript DICOM network library, DICOM to WebSocket proxy and a proof-of-concept web application that qualifies as a DICOM 3.0 device were developed.

The Java EE architect's handbook how to be a successful application architect for Java EE applications

CERN Document Server

Ashmore, Derek C.

2014-01-01

This handbook is a concise guide to assuming the role of application architect for Java EE applications. This handbook will guide the application architect through the entire Java EE project including identifying business requirements, performing use-case analysis, object and data modeling, and guiding a development team during construction. This handbook will provide tips and techniques for communicating with project managers and management. This handbook will provide strategies for making your application easier and less costly to support. Whether you are about to architect your first Java EE application or are looking for ways to keep your projects on-time and on-budget, you will refer to this handbook again and again.

Java across Different Curricula, Courses and Countries Using a Common Pool of Teaching Material

Science.gov (United States)

Ivanovic, Mirjana; Budimac, Zoran; Mishev, Anastas; Bothe, Klaus; Jurca, Ioan

2013-01-01

Under the auspices of a DAAD funded educational project, a subproject devoted to different aspects of teaching the Java programming language started several years ago. The initial intention of the subproject was to attract members of the subproject to prepare some teaching materials for teaching essentials of the Java programming language. During…

A Standalone Vision Impairments Simulator for Java Swing Applications

Science.gov (United States)

Oikonomou, Theofanis; Votis, Konstantinos; Korn, Peter; Tzovaras, Dimitrios; Likothanasis, Spriridon

A lot of work has been done lately in an attempt to assess accessibility. For the case of web rich-client applications several tools exist that simulate how a vision impaired or colour-blind person would perceive this content. In this work we propose a simulation tool for non-web JavaTM Swing applications. Developers and designers face a real challenge when creating software that has to cope with a lot of interaction situations, as well as specific directives for ensuring an accessible interaction. The proposed standalone tool will assist them to explore user-centered design and important accessibility issues for their JavaTM Swing implementations.

Java Application Shell: A Framework for Piecing Together Java Applications

Science.gov (United States)

Miller, Philip; Powers, Edward I. (Technical Monitor)

2001-01-01

This session describes the architecture of Java Application Shell (JAS), a Swing-based framework for developing interactive Java applications. Java Application Shell is being developed by Commerce One, Inc. for NASA Goddard Space Flight Center Code 588. The purpose of JAS is to provide a framework for the development of Java applications, providing features that enable the development process to be more efficient, consistent and flexible. Fundamentally, JAS is based upon an architecture where an application is considered a collection of 'plugins'. In turn, a plug-in is a collection of Swing actions defined using XML and packaged in a jar file. Plug-ins may be local to the host platform or remotely-accessible through HTTP. Local and remote plugins are automatically discovered by JAS upon application startup; plugins may also be loaded dynamically without having to re-start the application. Using Extensible Markup Language (XML) to define actions, as opposed to hardcoding them in application logic, allows easier customization of application-specific operations by separating application logic from presentation. Through XML, a developer defines an action that may appear on any number of menus, toolbars, and buttons. Actions maintain and propagate enable/disable states and specify icons, tool-tips, titles, etc. Furthermore, JAS allows actions to be implemented using various scripting languages through the use of IBM's Bean Scripting Framework. Scripted action implementation is seamless to the end-user. In addition to action implementation, scripts may be used for application and unit-level testing. In the case of application-level testing, JAS has hooks to assist a script in simulating end-user input. JAS also provides property and user preference management, JavaHelp, Undo/Redo, Multi-Document Interface, Single-Document Interface, printing, and logging. Finally, Jini technology has also been included into the framework by means of a Jini services browser and the

Extending Java for High-Level Web Service Construction

DEFF Research Database (Denmark)

Christensen, Aske Simon; Møller, Anders; Schwartzbach, Michael Ignatieff

2003-01-01

We incorporate innovations from the project into the Java language to provide high-level features for Web service programming. The resulting language, JWIG, contains an advanced session model and a flexible mechanism for dynamic construction of XML documents, in particular XHTML. To support program...

Real-Time Remote Diagnostic Monitoring Test-bed in JET

Energy Technology Data Exchange (ETDEWEB)

Castro, R. [Asociation Euratom/CIEMAT para Fusion, Madrid (Spain); Kneupner, K.; Purahoo, K. [EURATOM/UKAEA Fusion Association, Abingdon (United Kingdom); Vega, J.; Pereira, A.; Portas, A. [Association EuratomCIEMAT para Fusion, Madrid (Spain); De Arcas, G.; Lopez, J.M. [Universidad Politecnica de Madrid (Spain); Murari, A. [Consorzio RFX, Padova (Italy); Fonseca, A. [Associacao URATOM/IST, Lisboa (Portugal); Contributors, J.E. [JET-EFDA, Abingdon (United Kingdom)

2009-07-01

Based on the remote experimentation concept oriented to long pulse shots, a test-bed system has been implemented in JET. It integrates 2 functionalities. The first one is the real-time monitoring, on remote, of a reflectometer diagnostic, to visualize different data outputs and status information. The second one is the integration of dotJET (Diagnostic Overview Tool for JET), which internally provides at JET an overview about the current diagnostic systems state, in order to monitor, on remote, JET diagnostics status. The architecture of the system is formed by: the data generator components, the data distribution system, an access control service, and the client applications. In the test-bed there are two data generators: the acquisition equipment associated with the reflectometer diagnostic that generates data and status information, and dotJET server that centralize the access to the status information of JET diagnostics. The data distribution system has been implemented using a publishing-subscribing technology that receives data from data generators and redistributes them to client applications. And finally, for monitoring, a client application based on Java Web Start technology, and a dotJET client application have been used. There are 3 interesting results from this project. The first one is the analysis of different aspects (data formats, data frame rate, data resolution, etc) related with remote real-time diagnostic monitoring oriented to long pulse experiments. The second one is the definition and implementation of a flexible enough architecture, to be applied to different types of data generated from other diagnostics, and that fits with remote access requirements; and the third one is to have achieved a secure system, taking into account internal networks and firewalls aspects in JET, and securing the access from remote users. For this last issue, PAPI technology has been used, enabling access control based on user attributes, enabling mobile users to

A distributed real-time operating system

International Nuclear Information System (INIS)

Tuynman, F.; Hertzberger, L.O.

1984-07-01

A distributed real-time operating system, Fados, has been developed for an embedded multi-processor system. The operating system is based on a host target approach and provides for communication between arbitrary processes on host and target machine. The facilities offered are, apart from process communication, access to the file system on the host by programs on the target machine and monitoring and debugging of programs on the target machine from the host. The process communication has been designed in such a way that the possibilities are the same as those offered by the Ada programming language. The operating system is implemented on a MC 68000 based multiprocessor system in combination with a Unix host. (orig.)

Real-time objects development: Study and proposal for a parallel scheduling architecture

International Nuclear Information System (INIS)

Rioux, Laurent

1997-01-01

This thesis contributes to the programming and the execution control of real-time object oriented applications. Using real-time objects is very interesting for programming real- time applications, because this model can introduce the concurrence with the encapsulation properties, with modularity and reusability by taking into account the real-time constraints of the application. One essential quality of this approach is that it can directly specify the parallelism and the real-time constraints at the model level of the application. An annotation system of C++ has been defined to describe the real-time specifications in the model (or in the source code) of the application. It will supply to the execution support the different information it needs for the control. In this approach of multitasking, the control is distributed and encapsulated inside each real time object. Three complementary levels of control have been defined: the state level (defining the capability of an object to treat an operation), the concurrence level (assuring the coherence between the object attributes) and a scheduling control (allocating the processors resources to the object by taking real-time constraints into account). The proposed control architecture, named OROS, manages the attribute access of each object in an individual way, then it can parallel treatments which do not access at the same data. This architecture makes a dynamic control of an application that can take benefit from the parallelism of the new machines both for the execution parallelism and the control itself. This architecture uses only the simplest primitives of the industrial real-time operating systems which ensures its feasibility and portability. (author) [fr

Development and demonstration of near-real-time accounting systems for reprocessing plants

International Nuclear Information System (INIS)

Cobb, D.D.; Hakkila, E.A.; Dayem, H.A.; Shipley, J.P.; Baker, A.L.

1981-01-01

A program to develop and demonstrate near-real-time accounting systems for reprocessing plants has been active at Los Alamos since 1976. The technology has been developed through modeling and simulation of process operation and measurement systems and evaluation of these data using decision analysis techniques. Aspects of near-real-time systems have been demonstrated successfully at the AGNS reprocessng plant as part of a joint study of near-real-time accounting

A Java Program for the Viewing of Ambient Data

International Nuclear Information System (INIS)

Fisher, A.

2004-01-01

The BaBar detector system has a large number of sensors and data feeds, called ambient feeds. These feeds are vital to the operation and monitoring of the Pep rings and the BaBar system. In order to more easily monitor these systems a simple web interface to display graphical representations of the data is needed. Towards this end it was decided that using a Java Web Servlet (Sun Microsystems) would be an effective and simple way to achieve this effect. By combining Web Servlets with the Corba Technology (OMG) this provides a way for many people to access data from anywhere in the world. Using this type of program in conjunction with the HEP AIDA systems for graphing makes a powerful tool for the monitoring of the BaBar system. An overview of the BaBar system, and how the Ambient data is given. The uses and limitations of this method for viewing the data as well as examples of other ways to access the data and potential other uses for the servlet are also discussed

Creation and clinical application of real-time dose monitor using dose area product meter

International Nuclear Information System (INIS)

Matsubara, Kosuke; Uoyama, Yoshinori; Iida, Hiroji; Mizushima, Takashi

2004-01-01

The management of patient dose has become more of an issue in recent years. Dose can be determined non-invasively and in real time through the use of a dose area product meter, but it is the area dose value that is obtained. Therefore, we created a program that estimates entrance skin dose (ESD) in real time from area dose values obtained during procedures. We used Microsoft Visual C++ 6.0 (Standard Edition) for the programming language and C language for the programming environment. The value was a maximum 285.4 mGy at ileus tube insertion when measuring ESD for radiography of the digestive organ and non-vascular type interventional radiology (IVR) using the created program and seeking the average according to the procedures. The program that we created can be considered valid for monitoring ESD correctly and in real time. (author)

J Is for JavaScript: A Direct-Style Correspondence between Algol-Like Languages and JavaScript Using First-Class Continuations

DEFF Research Database (Denmark)

Danvy, Olivier; Shan, Chung-chieh; Zerny, Ian Steven

2009-01-01

. This tension arises especially when the domain calls for complex control structures. We illustrate this tension by revisiting Landin’s original correspondence between Algol and Church’s lambda-notation. We translate domain-specific programs with lexically scoped jumps to JavaScript. Our translation produces...... us to conclude that translations should preserve not just the data structures and the block structure of a source program, but also its control structure. We thus identify a new class of use cases for control structures in JavaScript, namely the idiomatic translation of control structures from DSLs....... the same block structure and binding structure as in the source program, à la Abdali. The target code uses a control operator in direct style, à la Landin. In fact, the control operator used is almost Landin’s J—hence our title. Our translation thus complements a continuation-passing translation à la...

Process algebra with timing : real time and discrete time

NARCIS (Netherlands)

Baeten, J.C.M.; Middelburg, C.A.; Bergstra, J.A.; Ponse, A.J.; Smolka, S.A.

2001-01-01

We present real time and discrete time versions of ACP with absolute timing and relative timing. The starting-point is a new real time version with absolute timing, called ACPsat, featuring urgent actions and a delay operator. The discrete time versions are conservative extensions of the discrete

Process algebra with timing: Real time and discrete time

NARCIS (Netherlands)

Baeten, J.C.M.; Middelburg, C.A.

1999-01-01

We present real time and discrete time versions of ACP with absolute timing and relative timing. The startingpoint is a new real time version with absolute timing, called ACPsat , featuring urgent actions and a delay operator. The discrete time versions are conservative extensions of the discrete

Efficient construction of approximate call graphs for JavaScript IDE services

DEFF Research Database (Denmark)

Feldthaus, Asger; Schäfer, Max; Sridharan, Manu

2013-01-01

The rapid rise of JavaScript as one of the most popular programming languages of the present day has led to a demand for sophisticated IDE support similar to what is available for Java or C#. However, advanced tooling is hampered by the dynamic nature of the language, which makes any form of stat...

Java EE 7 first look

CERN Document Server

Fabrice, Armel

2013-01-01

An easy-to-follow guide to reveal the new features of Java EE 7 and how to efficiently utilize them.Given the main objectives pursued, this book targets three groups of people with a knowledge of the Java language. They are:Beginners in the Java EE platform who would like to have an idea about the main specifications of Java EE 7.Developers who have experimented with previous versions of Java EE and who would like to explore the new features of Java EE 7.Building architects who want to learn how to put together the various Java EE 7 specifications for building robust and secure enterprise appl

Real-time radiography

International Nuclear Information System (INIS)

Bossi, R.H.; Oien, C.T.

1981-01-01

Real-time radiography is used for imaging both dynamic events and static objects. Fluorescent screens play an important role in converting radiation to light, which is then observed directly or intensified and detected. The radiographic parameters for real-time radiography are similar to conventional film radiography with special emphasis on statistics and magnification. Direct-viewing fluoroscopy uses the human eye as a detector of fluorescent screen light or the light from an intensifier. Remote-viewing systems replace the human observer with a television camera. The remote-viewing systems have many advantages over the direct-viewing conditions such as safety, image enhancement, and the capability to produce permanent records. This report reviews real-time imaging system parameters and components

Java Swing

CERN Document Server

Loy, Marc; Eckstein, Robert; Elliott, James; Wood, Dave

2003-01-01

Swing is a fully-featured user interface development kit for Java applications. Building on the foundations of the Abstract Window Toolkit (AWT), Swing enables cross-platform applications to use any of several pluggable look-and-feels. Swing developers can take advantage of its rich, flexible features and modular components, building elegant user interfaces with very little code. This second edition of Java Swing thoroughly covers all the features available in Java 2 SDK 1.3 and 1.4. More than simply a reference, this new edition takes a practical approach. It is a book by developers for

Real-time Executive for a basic principle simulator