4th June: AIS and NICE/MAIL unique authentication

CERN Multimedia

The AIS and NICE teams

2007-01-01

Over the past few years, the IT department has been in the process of streamlining CERN users' access to all central computing services. The long term goal is to converge on a unique computer account, which will increase computer security and simplify account maintenance. The next step of this process will occur on the 4th June 2007, as of when authenticating on the AIS applications (EDH, HRT, CET, APT, ERT, CRA, Foundation, ...) and on NICE (Windows) and MAIL will be done using the same username and password. As a reminder, this account can also be used on EDMS, INDICO, CDS and SIMBA. Thus starting on the 4th June 2007, authentication on the AIS applications must be done using your AIS username and your MAIL/NICE password. Thanks for your understanding, The AIS and NICE teams

EPAC in Nice

Energy Technology Data Exchange (ETDEWEB)

Anon.

1990-09-15

The signpost to the accelerator future points in several directions, and the second European Particle Accelerator Conference (EPAC), held in Nice from 12-16 June provided a good opportunity to survey the terrain ahead. Building on the experience of the first EPAC, held in Rome in 1988, the organizers planned for a large meeting and were rewarded with 800 participants. In parallel, the involvement of industry, with a comprehensive 44-strong exhibition, prompted many speakers to refer to the symbiosis of accelerators and industry.

EPAC in Nice

International Nuclear Information System (INIS)

Anon.

1990-01-01

The signpost to the accelerator future points in several directions, and the second European Particle Accelerator Conference (EPAC), held in Nice from 12-16 June provided a good opportunity to survey the terrain ahead. Building on the experience of the first EPAC, held in Rome in 1988, the organizers planned for a large meeting and were rewarded with 800 participants. In parallel, the involvement of industry, with a comprehensive 44-strong exhibition, prompted many speakers to refer to the symbiosis of accelerators and industry

DECISION-COMPONENTS OF NICE'S TECHNOLOGY APPRAISALS ASSESSMENT FRAMEWORK.

Science.gov (United States)

de Folter, Joost; Trusheim, Mark; Jonsson, Pall; Garner, Sarah

2018-01-01

Value assessment frameworks have gained prominence recently in the context of U.S. healthcare. Such frameworks set out a series of factors that are considered in funding decisions. The UK's National Institute of Health and Care Excellence (NICE) is an established health technology assessment (HTA) agency. We present a novel application of text analysis that characterizes NICE's Technology Appraisals in the context of the newer assessment frameworks and present the results in a visual way. A total of 243 documents of NICE's medicines guidance from 2007 to 2016 were analyzed. Text analysis was used to identify a hierarchical set of decision factors considered in the assessments. The frequency of decision factors stated in the documents was determined and their association with terms related to uncertainty. The results were incorporated into visual representations of hierarchical factors. We identified 125 decision factors, and hierarchically grouped these into eight domains: Clinical Effectiveness, Cost Effectiveness, Condition, Current Practice, Clinical Need, New Treatment, Studies, and Other Factors. Textual analysis showed all domains appeared consistently in the guidance documents. Many factors were commonly associated with terms relating to uncertainty. A series of visual representations was created. This study reveals the complexity and consistency of NICE's decision-making processes and demonstrates that cost effectiveness is not the only decision-criteria. The study highlights the importance of processes and methodology that can take both quantitative and qualitative information into account. Visualizations can help effectively communicate this complex information during the decision-making process and subsequently to stakeholders.

Tropospheric characteristics over sea ice during N-ICE2015

Science.gov (United States)

Kayser, Markus; Maturilli, Marion; Graham, Robert; Hudson, Stephen; Cohen, Lana; Rinke, Annette; Kim, Joo-Hong; Park, Sang-Jong; Moon, Woosok; Granskog, Mats

2017-04-01

Over recent years, the Arctic Ocean region has shifted towards a younger and thinner sea-ice regime. The Norwegian young sea ICE (N-ICE2015) expedition was designed to investigate the atmosphere-snow-ice-ocean interactions in this new ice regime north of Svalbard. Here we analyze upper-air measurements made by radiosondes launched twice daily together with surface meteorology observations during N-ICE2015 from January to June 2015. We study the multiple cyclonic events observed during N-ICE2015 with respect to changes in the vertical thermodynamic structure, sudden increases in moisture content and temperature, temperature inversions and boundary layer dynamics. The influence of synoptic cyclones is strongest under polar night conditions, when radiative cooling is most effective and the moisture content is low. We find that transitions between the radiatively clear and opaque state are the largest drivers of changes to temperature inversion and stability characteristics in the boundary layer during winter. In spring radiative fluxes warm the surface leading to lifted temperature inversions and a statically unstable boundary layer. The unique N-ICE2015 dataset is used for case studies investigating changes in the vertical structure of the atmosphere under varying synoptic conditions. The goal is to deepen our understanding of synoptic interactions within the Arctic climate system, to improve model performance, as well as to identify gaps in instrumentation, which precludes further investigations.

The NICE ADHD health technology assessment: A review and critique

Directory of Open Access Journals (Sweden)

Schlander Michael

2008-01-01

Full Text Available Abstract Background Health technology assessments (HTAs by the National Institute for Health and Clinical Excellence (NICE enjoy high levels of international attention. The present analysis addresses NICE's appraisal of methylphenidate, atomoxetine and dexamphetamine for attention-deficit/hyperactivity disorder (ADHD in children and adolescents, published in March 2006. Methods A qualitative study of NICE Technology Appraisal No. 98 was done focusing on the >600-page technology assessment report, which aimed at evaluating ADHD treatment strategies by a clinical effectiveness review and an economic analysis using meta-analytical techniques and a cost-effectiveness model. Results The technology assessment was unable to differentiate between the various drugs in terms of efficacy, and its economic model was ultimately driven by cost differences. While the assessment concluded that the economic model "clearly identified an optimal treatment strategy" with first-line dexamphetamine, the NICE appraisal committee subsequently found it impossible to distinguish between the different strategies on grounds of cost-effectiveness. Analyzing the assessment reveals gaps and inconsistencies concerning data selection (ultimately relying on a small number of short-term studies only, data synthesis (pooling of heterogeneous study designs and clinical endpoints, and economic model structure (identifying double-counting of nonresponders as a likely source of bias, alongside further methodological anomalies. Conclusion Many conclusions of the NICE technology assessment rest on shaky grounds. There remains a need for a new, state-of-the-art systematic review of ADHD treatment strategies including economic evaluation, which ideally should address outcomes beyond children's health-related quality of life, such as long-term sequelae of the disorder and caregiver burden.

Can the NICE "end-of-life premium" be given a coherent ethical justification?

Science.gov (United States)

Cookson, Richard

2013-12-01

In 2009 the UK National Institute for Health and Clinical Excellence (NICE) announced that its health technology appraisal committees would henceforth give special additional weight to health gains from life-extending end-of-life treatments. This was a response to mounting concern from NICE's stakeholders that effective new drugs for end-stage cancer often fail NICE's standard test of cost effectiveness. This change of policy may be justifiable on procedural grounds as the result of a democratic political process responding to stakeholder concerns. However, according to the "accountability for reasonableness" framework proposed by the philosopher Norman Daniels and endorsed by NICE, there also needs to be transparency about the substantive ethical grounds for public health care resource allocation decisions. In that spirit, I analyze eleven potentially relevant justifications for the NICE "end-of-life premium," drawn from the economics and philosophy literature: (1) rule of rescue, (2) fair chances, (3) ex post willingness to pay, (4) caring externality, (5) financial protection, (6) symbolic value, (7) diminishing marginal value of future life years, (8) concentration of benefits, (9) dread, (10) time to set your affairs in order, and (11) severity of illness. I conclude that none of them yields a coherent ethical justification for the NICE end-of-life premium.

They're NICE and Neat, but Are They Useful? A Grounded Theory of Clinical Psychologists' Beliefs About and Use of NICE Guidelines.

Science.gov (United States)

Court, Alex John; Cooke, Anne; Scrivener, Amanda

2017-07-01

Guidelines are ubiquitous but inconsistently used in UK mental health services. Clinical psychologists are often influential in guideline development and implementation, but opinion within the profession is divided. This study utilized grounded theory methodology to examine clinical psychologists' beliefs about and use of NICE guidelines. Eleven clinical psychologists working in the NHS were interviewed. The overall emerging theme was; NICE guidelines are considered to have benefits but to be fraught with dangers. Participants were concerned that guidelines can create an unhelpful illusion of neatness. They managed the tension between the helpful and unhelpful aspects of guidelines by relating to them in a flexible manner. The participants reported drawing on specialist skills such as idiosyncratic formulation and integration. However, due to the pressures and dominant discourses within services they tended to practice in ways that prevent these skills from being recognized. This led to fears that their professional identity was threatened, which impacted upon perceptions of the guidelines. To our knowledge, the theoretical framework presented in this paper is the first that attempts to explain why NICE guidelines are not consistently utilized in UK mental health services. The current need for services to demonstrate 'NICE compliance' may be leading to a perverse incentive for clinical psychologists in particular to do one thing but say another and for specialist skills to be obscured. If borne out by future studies, this represents a threat to continued quality improvement and also to the profession. Copyright © 2016 John Wiley & Sons, Ltd. Guidelines have many benefits, but the current pressure for services to be 'NICE compliant' may be having unintended negative as well as positive effects. Lack of implementation may be partly the result of active choice by clinicians concerned to use the full range of professional skills and to offer flexibility and choice to

CERN Technology on Display in Nice

CERN Multimedia

2000-01-01

Bob Dobinson (center) and Brian Martin (right) presenting technology transfer from CERN to indus exhibition in Nice. Nice in November was the scene of the EU sponsored Information Science Technologies, IST2000 exhibition, where CERN was invited to present a stand focussing on the benefits to small companies and start-ups from association with CERN and the IST program. Companies from France, Israel and the UK were featured. Network technology standards that CERN has helped to develop have been adopted by the European Space Agency for use in future space vehicles, and these too were on show. The challenges of data acquisition and data handling for the LHC are not insurmountable, but need to be approached with a combination of advanced technology and close industrial collaboration. One important aspect is that of high speed networking, an important component in both on-line and off-line computing (GRIDs). Real time data acquisition systems for the LHC require networks with high throughput, low latency, high rel...

Development of a robust and compact kerosene–diesel reaction mechanism for diesel engines

International Nuclear Information System (INIS)

Tay, Kun Lin; Yang, Wenming; Mohan, Balaji; An, Hui; Zhou, Dezhi; Yu, Wenbin

2016-01-01

Highlights: • An approach is used to develop a robust kerosene–diesel reaction mechanism. • Ignition delay of the kerosene sub-mechanism is well validated with experiments. • The kerosene sub-mechanism reproduces the flame lift-off lengths of Jet-A reasonably well. • The kerosene sub-mechanism performs reasonably well under engine conditions. - Abstract: The use of kerosene fuels in internal combustion engines is getting more widespread. The North Atlantic Treaty Organization military is pushing for the use of a single fuel on the battlefield in order to reduce logistical issues. Moreover, in some countries, fuel adulteration is a serious matter where kerosene is blended with diesel and used in diesel engines. So far, most investigations done regarding the use of kerosene fuels in diesel engines are experimental and there is negligible simulation work done in this area possibly because of the lack of a robust and compact kerosene reaction mechanism. This work focuses on the development of a small but reliable kerosene–diesel reaction mechanism, suitable to be used for diesel engine simulations. The new kerosene–diesel reaction mechanism consists only of 48 species and 152 reactions. Furthermore, the kerosene sub-mechanism in this new mechanism is well validated for its ignition delay times and has proven to replicate kerosene combustion well in a constant volume combustion chamber and an optical engine. Overall, this new kerosene–diesel reaction mechanism is proven to be robust and practical for diesel engine simulations.

Method of operating a thermal engine powered by a chemical reaction

Science.gov (United States)

Ross, J.; Escher, C.

1988-06-07

The invention involves a novel method of increasing the efficiency of a thermal engine. Heat is generated by a non-linear chemical reaction of reactants, said heat being transferred to a thermal engine such as Rankine cycle power plant. The novel method includes externally perturbing one or more of the thermodynamic variables of said non-linear chemical reaction. 7 figs.

Expanding P450 catalytic reaction space through evolution and engineering

Science.gov (United States)

McIntosh, John A.; Farwell, Christopher C.; Arnold, Frances H.

2014-01-01

Advances in protein and metabolic engineering have led to wider use of enzymes to synthesize important molecules. However, many desirable transformations are not catalyzed by any known enzyme, driving interest in understanding how new enzymes can be created. The cytochrome P450 enzyme family, whose members participate in xenobiotic metabolism and natural products biosynthesis, catalyzes an impressive range of difficult chemical reactions that continues to grow as new enzymes are characterized. Recent work has revealed that P450-derived enzymes can also catalyze useful reactions previously accessible only to synthetic chemistry. The evolution and engineering of these enzymes provides an excellent case study for how to genetically encode new chemistry and expand biology’s reaction space. PMID:24658056

Not a NICE CT protocol for the acutely head injured child

International Nuclear Information System (INIS)

Willis, A.P.; Latif, S.A.A.; Chandratre, S.; Stanhope, B.; Johnson, K.

2008-01-01

Aim: To assess the impact of the introduction of the Birmingham Children's Hospital (BCH) head injury computed tomography (CT) guidelines, when compared with the National Institute of Health and Clinical Excellence (NICE) guidelines, on the number of children with head injuries referred from the Emergency Department (ED) undergoing a CT examination of the head. Material and methods: All children attending BCH ED over a 6-month period with any severity of head injury were included in the study. ED case notes were reviewed and data were collected on a specifically designed proforma. Indications for a CT examination according to both NICE and BCH head injury guidelines and whether or not CT examinations were performed were recorded. Results: A total of 1428 children attended the BCH ED following a head injury in the 6-month period. The median age was 4 years (range 6 days to 15 years) and 65% were boys. Four percent of children were referred for a CT using BCH guidelines and were appropriately examined. If the NICE guidelines had been strictly adhered to a further 8% of children would have undergone a CT examination of the head. All of these children were discharged without complication. The remaining 88% had no indication for CT examination by either BCH or NICE and appropriately did not undergo CT. Conclusions: Adherence to the NICE head injury guidelines would have resulted in a three-fold increase in the total number of CT examinations of the head. The BCH head injury guidelines are both safe and appropriate in the setting of a large children's hospital experienced in the management of children with head injuries

RWE NUKEM's 'Living' Nuclear Compendium eNICE. An internet-based, multifunctional nuclear information platform

International Nuclear Information System (INIS)

Kwasny, R.; Max, A.

2002-01-01

Information has become a commodity particularly important to industry, science, and politics. Information becomes critical because of its rapid change. The basis and the catalyst of this change in information are the information technologies now available, and the Internet with its varied contents. This makes the Internet a new market place which, although it is open, can quickly turn into an information maze because of its sheer volume. Also the nuclear industry must find its way through this maze. eNICE was created in order to build a bridge between the flood of information in the Internet and the information really needed in a specific case. eNICE (e stands for electronic, and NICE stands for Nuclear Information Compendium Europe), a living Internet-based nuclear compendium in the English language, is a unique combination of a broad spectrum of information and data about the use of nuclear power in Europe. The information and data contained in eNICE are interconnected with the World Wide Web in such a way that structured searching for nuclear information is possible quickly and efficiently. This avoids the difficulties sometimes encountered in searches in the Internet as a consequence of the unstructured volume of information. A monthly update of eNICE ensures that the data available are up to date and reliable. eNICE also offers direct access to the library used by RWE NUKEM for internal purposes. (orig.) [de

NICE recommendations for psychotherapy in depression: Of limited clinical utility.

Science.gov (United States)

McQueen, D; Smith, P St John

2015-01-01

In 2009/10 NICE partially updated its guidelines on the treatment and management of depression in adults. Due to methodological shortcomings the recommendations for psychotherapy must be treated with caution. Despite recognising the heterogeneous and comorbid nature of depression, and the limitations of depression as a unitary diagnostic category, NICE treats depression as if it were a unitary entity differentiated only by severity. The guidance ignores important aetiological factors such as trauma, loss and maltreatment, personality and interpersonal difficulties. It excludes the largest naturalistic studies on clinical populations treated in the National Health Service on the grounds that they are observational studies conducted in heterogeneous groups with mixed neurotic disorders. It unquestioningly accepts that the "brand" of psychotherapy has construct validity, and ignores psychotherapy process research indicating significant commonalities, and overlap, between treatment modalities and evidence that individual practitioner effects are larger than the differences between treatment modalities. It fails to consider patient differences and preferences, which are known to influence uptake, completion and response. It takes an exclusively short-term perspective on a chronic relapsing disorder. It does not consider the evidence for longer-term treatments. It is of special concern that NICE misrepresents the findings of its own systematic review by implying that CBT and IPT are superior treatments. NICE's systematic review actually found no evidence of superiority between CBT, IPT, psychodynamic psychotherapy, or counselling. Based on the exclusion of much clinically relevant research demonstrating the effectiveness of psychodynamic psychotherapy and counselling many commentators have alleged a bias towards CBT in the guidance. With regard to service delivery NICE proposes the replacement of psychiatric assessment and individualised treatment plans, with an unproven

NICE guidelines, clinical practice and antisocial personality disorder: the ethical implications of ontological uncertainty.

Science.gov (United States)

Pickersgill, M D

2009-11-01

The British National Institute for Health and Clinical Excellence (NICE) has recently (28 January 2009) released new guidelines for the diagnosis, treatment and prevention of the psychiatric category antisocial personality disorder (ASPD). Evident in these recommendations is a broader ambiguity regarding the ontology of ASPD. Although, perhaps, a mundane feature of much of medicine, in this case, ontological uncertainty has significant ethical implications as a product of the profound consequences for an individual categorised with this disorder. This paper argues that in refraining from emphasising uncertainty, NICE risks reifying a controversial category. This is particularly problematical given that the guidelines recommend the identification of individuals "at risk" of raising antisocial children. Although this paper does not argue that NICE is "wrong" in any of its recommendations, more emphasis should have been placed on discussions of the ethical implications of diagnosis and treatment, especially given the multiple uncertainties associated with ASPD. It is proposed that these important issues be examined in more detail in revisions of existing NICE recommendations, and be included in upcoming guidance. This paper thus raises key questions regarding the place and role of ethics within the current and future remit of NICE.

Rapid sampling of BTEX in air by SPME in the city of Nice and at the Nice-Cote d'Azur airport

International Nuclear Information System (INIS)

Tumbiolo, S.; Gal, J.F.; Maria, P.Ch.; Laborde, P.; Teton, S.

2006-01-01

This article presents the results of a tentative application of Solid Phase Micro Extraction (SPME) to the analysis of BTEX (benzene, toluene, ethyl-benzene and xylenes) at the μg/m 3 level in indoor and outdoor air. The salient features of the method validation are reported. Sampling by QUALITAIR using Radiello passive samplers, was carried out from 2001 to 2004 in the city of Nice and its airport. Urban traffic impact was proved, but a link between BTX concentrations and the variations of airport activities was not clearly established. During the same period, several samplings were performed using SPME. Taking into account the short (30 minutes) sampling time, rapid changes of BTEX concentrations were evidenced, as for example the start of airplane engines. As field studies have shown, SPME technique appears as a method of choice for fast qualitative analysis and quantitative determination of Volatile Organic Compounds (VOC). The small dimensions of the SPME sampling system and the short sampling time let envisage its utilisation for the rapid diagnostic and the monitoring of indoor air quality. (author)

An Update on Improvements to NiCE Support for PROTEUS

Energy Technology Data Exchange (ETDEWEB)

Bennett, Andrew [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); McCaskey, Alexander J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Billings, Jay Jay [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2015-09-01

The Department of Energy Office of Nuclear Energy's Nuclear Energy Advanced Modeling and Simulation (NEAMS) program has supported the development of the NEAMS Integrated Computational Environment (NiCE), a modeling and simulation workflow environment that provides services and plugins to facilitate tasks such as code execution, model input construction, visualization, and data analysis. This report details the development of workflows for the reactor core neutronics application, PROTEUS. This advanced neutronics application (primarily developed at Argonne National Laboratory) aims to improve nuclear reactor design and analysis by providing an extensible and massively parallel, finite-element solver for current and advanced reactor fuel neutronics modeling. The integration of PROTEUS-specific tools into NiCE is intended to make the advanced capabilities that PROTEUS provides more accessible to the nuclear energy research and development community. This report will detail the work done to improve existing PROTEUS workflow support in NiCE. We will demonstrate and discuss these improvements, including the development of flexible IO services, an improved interface for input generation, and the addition of advanced Fortran development tools natively in the platform.

Results of the 2010 Survey on Teaching Chemical Reaction Engineering

Science.gov (United States)

Silverstein, David L.; Vigeant, Margot A. S.

2012-01-01

A survey of faculty teaching the chemical reaction engineering course or sequence during the 2009-2010 academic year at chemical engineering programs in the United States and Canada reveals change in terms of content, timing, and approaches to teaching. The report consists of two parts: first, a statistical and demographic characterization of the…

Chemical Reaction Engineering: Current Status and Future Directions.

Science.gov (United States)

Dudukovic, M. P.

1987-01-01

Describes Chemical Reaction Engineering (CRE) as the discipline that quantifies the interplay of transport phenomena and kinetics in relating reactor performance to operating conditions and input variables. Addresses the current status of CRE in both academic and industrial settings and outlines future trends. (TW)

Review of the role of NICE in promoting the adoption of innovative cardiac technologies.

Science.gov (United States)

Groves, Peter H; Pomfrett, Chris; Marlow, Mirella

2018-05-17

The National Institute for Health and Care Excellence (NICE) Medical Technologies Evaluation Programme (MTEP) promotes the adoption of innovative diagnostic and therapeutic technologies into National Health Service (NHS) clinical practice through the publication of guidance and briefing documents. Since the inception of the programme in 2009, there have been 7 medical technologiesguidance, 3 diagnostics guidance and 23 medtechinnovation briefing documents published that are relevant to the heart and circulation. Medical technologies guidance is published by NICE for selected single technologies if they offer plausible additional benefits to patients and the healthcare system. Diagnostic guidance is published for diagnostic technologies if they have the potential to improve health outcomes, but if their introduction may be associated with an increase in overall cost to the NHS. Medtechinnovation briefings provide evidence-based advice to those considering the implementation of new medical devices or diagnostic technologies. This review provides reference to all of the guidance and briefing medical technology documents that NICE has published that are relevant to the heart and circulation and reflect on their diverse recommendations. The interaction of MTEP with other NICE programmes is integral to its effectiveness and the means by which consistency is ensured across the different NICE programmes is described. The importance of the input of clinical experts from the cardiovascular professional community and the engagement by NICE with cardiovascular professional societies is highlighted as being fundamental to ensuring the quality of guidance outputs as well as to promoting their implementation and adoption. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Caveat emptor NICE

DEFF Research Database (Denmark)

Dowie, Jack; Kaltoft, Mette Kjer; Nielsen, Jesper Bo

2015-01-01

Concern with the threshold applied in cost-effectiveness analyses by bodies such as NICE distracts attention from their biased use of the principle. The bias results from the prior requirement that an intervention be effective (usually 'clinically effective') before its cost-effectiveness...... is considered. The underlying justification for the use of cost-effectiveness as a criterion, whatever the threshold adopted, is that decisions in a resource-constrained system have opportunity costs. Their existence rules out any restriction to those interventions that are 'incrementally cost-effective......' at a chosen threshold and requires acceptance of those that are 'decrementally cost-effective' at the same threshold. Interventions that fall under the linear ICER line in the South-West quadrant of the cost-effectiveness plane are cost-effective because they create net health benefits, as do those...

Chemical Reaction Engineering Applications in Non-traditional Technologies. A Textbook Supplement.

Science.gov (United States)

Savage, Phillip E.; Blaine, Steven

1991-01-01

A set of educational materials that have been developed which deal with chemical engineering applications in emerging technologies is described. The organization and the content of the supplemental textbook materials and how they can be integrated into an undergraduate reaction engineering course are discussed. (KR)

Does Methodological Guidance Produce Consistency? A Review of Methodological Consistency in Breast Cancer Utility Value Measurement in NICE Single Technology Appraisals.

Science.gov (United States)

Rose, Micah; Rice, Stephen; Craig, Dawn

2017-07-05

Since 2004, National Institute for Health and Care Excellence (NICE) methodological guidance for technology appraisals has emphasised a strong preference for using the validated EuroQol 5-Dimensions (EQ-5D) quality-of-life instrument, measuring patient health status from patients or carers, and using the general public's preference-based valuation of different health states when assessing health benefits in economic evaluations. The aim of this study was to review all NICE single technology appraisals (STAs) for breast cancer treatments to explore consistency in the use of utility scores in light of NICE methodological guidance. A review of all published breast cancer STAs was undertaken using all publicly available STA documents for each included assessment. Utility scores were assessed for consistency with NICE-preferred methods and original data sources. Furthermore, academic assessment group work undertaken during the STA process was examined to evaluate the emphasis of NICE-preferred quality-of-life measurement methods. Twelve breast cancer STAs were identified, and many STAs used evidence that did not follow NICE's preferred utility score measurement methods. Recent STA submissions show companies using EQ-5D and mapping. Academic assessment groups rarely emphasized NICE-preferred methods, and queries about preferred methods were rare. While there appears to be a trend in recent STA submissions towards following NICE methodological guidance, historically STA guidance in breast cancer has generally not used NICE's preferred methods. Future STAs in breast cancer and reviews of older guidance should ensure that utility measurement methods are consistent with the NICE reference case to help produce consistent, equitable decision making.

Progress in biocatalysis with immobilized viable whole cells: systems development, reaction engineering and applications

Czech Academy of Sciences Publication Activity Database

Polakovič, M.; Švitel, J.; Bučko, M.; Filip, J.; Neděla, Vilém; Ansorge-Schumacher, M.B.; Gemeiner, P.

2017-01-01

Roč. 39, č. 5 (2017), s. 667-683 ISSN 0141-5492 Institutional support: RVO:68081731 Keywords : biocatalysis * immobilization methods * immobilized whole-cell biocatalyst * multienzyme cascade reactions * process economics * reaction engineering Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering OBOR OECD: Bioprocessing technologies (industrial processes relying on biological agents to drive the process) biocatalysis, fermentation Impact factor: 1.730, year: 2016

Achieving high-quality care: a view from NICE.

Science.gov (United States)

Leng, Gillian; Partridge, Gemma

2018-01-01

The National Institute for Health and Care Excellence (NICE) was established in 1999 to provide evidence-based guidance. The task of producing guidance by reviewing primary research data and using an advisory committee to develop evidence-based recommendations, is not straightforward. Guidance production is, however, less challenging than the task of putting evidence-based recommendations into practice.NICE is very sensitive to this challenge as, since 1999, over 1500 pieces of NICE guidance have been published. A number of pieces of guidance relate to heart disease, including pharmaceutical agents, new medical technologies and clinical guidelines. Examples include guidelines on acute heart failure and atrial fibrillation, and advice on technologies including edoxaban and implantable cardioverter defibrillators.The research evidence is clear that a change in practice rarely comes about as a result of simply disseminating guidance on best practice. Simple dissemination is particularly ineffective if the guidance has not been produced by a well-respected, credible organisation. It is also clear from the literature that implementation is more successful when more than one approach is taken, and when there is alignment between efforts at organisational, local and national levels.At an organisational level, there should be support from the Board for quality improvement, with ongoing measurement of progress. Resources should be provided for targeted change programmes, particularly where new guidance suggests improvements are required. A systematic process for putting change in place should include identifying barriers to change, agreeing interventions to overcome the barriers and drive forward improvement and planning for implementation and evaluation. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Nice Teams Finish Last The Secret to Unleashing Your Team's Maximum Potential

CERN Document Server

Miller, Brian Cole

2010-01-01

Don't rock the boat. Don't make waves. Don't offend anyone. There's a palpable feeling that clouds many team meetings and keeps them from being productive: over-politeness. And while the conflict that naturally exists in most organizations hasn't gone away, it manifests itself in passive-aggression, mediocrity, and a molasses-like inability to get anything done. Nice Teams Finish Last provides the antidote to this all-too-common tendency, giving managers, team leaders and members, and facilitators the practical support they need to battle "the nice trap" and start getting results! The book hel

Generating Nice Linear Systems for Matrix Gaussian Elimination

Science.gov (United States)

Homewood, L. James

2004-01-01

In this article an augmented matrix that represents a system of linear equations is called nice if a sequence of elementary row operations that reduces the matrix to row-echelon form, through matrix Gaussian elimination, does so by restricting all entries to integers in every step. Many instructors wish to use the example of matrix Gaussian…

Researches on Preliminary Chemical Reactions in Spark-Ignition Engines

Science.gov (United States)

1943-06-01

compression type, without ignition, the resulting preliminary reactions being detectable and meas- urable thermometrically . Contents I. Influence of Preliminary...thoroughly insulated be- tween the carburettor and the engine, by aluminium foil and asbestos. -I -I " I" I ’I il i~ " !, I I 1𔃻I I’ ) To enable the

Demonstration of a Non-Toxic Reaction Control Engine

Science.gov (United States)

Robinson, Philip J.; Turpin, Alicia A.; Veith, Eric M.

2007-01-01

T:hree non-toxic demonstration reaction control engines (RCE) were successfully tested at the Aerojet Sacramento facility under a technology contract sponsored by the National Aeronautics and Space Administration's (NASA) Marshall Space Flight Center (MSFC). The goals of the NASA MSFC contract (NAS8-01109) were to develop and expand the technical maturity of a non-toxic, on-orbit auxiliary propulsion system (APS) thruster under the auspices of the Exploration Systems Mission Directorate. The demonstration engine utilized Liquid Oxygen (LOX) and Ethanol as propellants to produce 870 lbf thrust. The Aerojet RCE's were successfully acceptance tested over a broad range of operating conditions. Steady state tests evaluated engine response to varying chamber pressures and mixture ratios. In addition to the steady state tests, a variety of pulsing tests were conducted over a wide range of electrical pulse widths (EPW). Each EPW condition was also tested over a range of percent duty cycles (DC), and bit impulse and pulsing specific impulse were determined for each of these conditions. Subsequent to acceptance testing at Aerojet, these three engines were delivered to the NASA White Sands Test Facility (WSTF) in April 2005 for incorporation into a cryogenic Auxiliary Propulsion System Test Bed (APSTB). The APSTB is a test article that will be utilized in an altitude test cell to simulate anticipated mission applications. The objectives of this APSTB testing included evaluation of engine performance over an extended duty cycle map of propellant pressure and temperature, as well as engine and system performance at typical mission duty cycles over extended periods of time. This paper provides acceptance test results and a status of the engine performance as part of the system level testing.

Learning the Fundamentals of Kinetics and Reaction Engineering with the Catalytic Oxidation of Methane

Science.gov (United States)

Cybulskis, Viktor J.; Smeltz, Andrew D.; Zvinevich, Yury; Gounder, Rajamani; Delgass, W. Nicholas; Ribeiro, Fabio H.

2016-01-01

Understanding catalytic chemistry, collecting and interpreting kinetic data, and operating chemical reactors are critical skills for chemical engineers. This laboratory experiment provides students with a hands-on supplement to a course in chemical kinetics and reaction engineering. The oxidation of methane with a palladium catalyst supported on…

Adverse Reactions Associated With Cannabis Consumption as Evident From Search Engine Queries.

Science.gov (United States)

Yom-Tov, Elad; Lev-Ran, Shaul

2017-10-26

Cannabis is one of the most widely used psychoactive substances worldwide, but adverse drug reactions (ADRs) associated with its use are difficult to study because of its prohibited status in many countries. Internet search engine queries have been used to investigate ADRs in pharmaceutical drugs. In this proof-of-concept study, we tested whether these queries can be used to detect the adverse reactions of cannabis use. We analyzed anonymized queries from US-based users of Bing, a widely used search engine, made over a period of 6 months and compared the results with the prevalence of cannabis use as reported in the US National Survey on Drug Use in the Household (NSDUH) and with ADRs reported in the Food and Drug Administration's Adverse Drug Reporting System. Predicted prevalence of cannabis use was estimated from the fraction of people making queries about cannabis, marijuana, and 121 additional synonyms. Predicted ADRs were estimated from queries containing layperson descriptions to 195 ICD-10 symptoms list. Our results indicated that the predicted prevalence of cannabis use at the US census regional level reaches an R 2 of .71 NSDUH data. Queries for ADRs made by people who also searched for cannabis reveal many of the known adverse effects of cannabis (eg, cough and psychotic symptoms), as well as plausible unknown reactions (eg, pyrexia). These results indicate that search engine queries can serve as an important tool for the study of adverse reactions of illicit drugs, which are difficult to study in other settings. ©Elad Yom-Tov, Shaul Lev-Ran. Originally published in JMIR Public Health and Surveillance (http://publichealth.jmir.org), 26.10.2017.

Iceless Icy Moons: Is the Nice Model In Trouble?

Science.gov (United States)

Dones, Henry C. Luke; Levison, H. F.

2012-05-01

Nimmo and Korycansky (2012; henceforth NK12) stated that if the outer Solar System underwent a Late Heavy Bombardment (LHB) in the Nice model, the mass striking the icy satellites at speeds up to tens of km/s would have vaporized so much ice that moons such as Mimas, Enceladus, and Miranda would have been devolatilized. NK12's possible explanations of this apparent discrepancy with observations include (1) the mass influx was a factor of 10 less than that in the Nice model; (2) the mass distribution of the impactors was top-heavy, so that luck might have saved some of the moons from suffering large, vapor-removing impacts; or (3) the inner moons formed after the LHB. NK12 calculated the mass influx onto the satellites from the lunar impact rate estimated by Gomes et al. (2005) and scaling factors calculated by Zahnle et al. (1998, 2003; also see Barr and Canup 2010). Production of vapor in hypervelocity impacts is calculated from Kraus et al. (2011). Our preliminary results show that there is about an order-of-magnitude uncertainty in the mass striking the satellites during the LHB, with NK12's estimate at the upper end of the range. We will discuss how the mass influx depends on the velocity and mass distributions of the impactors. The Nice model lives. We thank the NASA Lunar Science Institute (http://lunarscience.nasa.gov/) for support. Barr, A.C., Canup, R.M., Nature Geoscience 3, 164-167 (2010). Gomes, R., Levison, H.F., Tsiganis, K., Morbidelli, A., Nature 435, 466-469 (2005). Kraus, R.G., Senft, L.E., Stewart, S.T., Icarus 214, 724-738 (2011). Nimmo, F., Korycansky, D.G., Icarus, in press, http://www.sciencedirect.com/science/article/pii/S0019103512000310 (2012). Zahnle, K., Dones, L., Levison, H.F., Icarus 136, 202-222 (1998). Zahnle, K., Schenk, P., Levison, H.F., Dones, L., Icarus 163, 263-289 (2003).

A Randomized Controlled Trial Comparing the Low FODMAP Diet vs. Modified NICE Guidelines in US Adults with IBS-D.

Science.gov (United States)

Eswaran, Shanti L; Chey, William D; Han-Markey, Theresa; Ball, Sarah; Jackson, Kenya

2016-12-01

There has been an increasing interest in the role of fermentable oligo-, di-, and monosaccharides and polyols (FODMAPs) in irritable bowel syndrome (IBS). We report results from the first randomized controlled trial of the low FODMAP diet in US adults with IBS and diarrhea (IBS-D). The objectives were to compare the efficacy of the low FODMAP diet vs. a diet based upon modified National Institute for Health and Care Excellence guidelines (mNICE) on overall and individual symptoms in IBS-D patients. This was a single-center, randomized-controlled trial of adult patients with IBS-D (Rome III) which compared 2 diet interventions. After a 2-week screening period, eligible patients were randomized to a low FODMAP or mNICE diet for 4 weeks. The primary end point was the proportion of patients reporting adequate relief of IBS-D symptoms ≥50% of intervention weeks 3-4. Secondary outcomes included a composite end point which required response in both abdominal pain (≥30% reduction in mean daily pain score compared with baseline) and stool consistency (decrease in mean daily Bristol Stool Form of ≥1 compared with baseline), abdominal pain and stool consistency responders, and other key individual IBS symptoms assessed using daily questionnaires. After screening, 92 subjects (65 women, median age 42.6 years) were randomized. Eighty-four patients completed the study (45 low FODMAP, 39 mNICE). Baseline demographics, symptom severity, and nutrient intake were similar between groups. Fifty-two percent of the low FODMAP vs. 41% of the mNICE group reported adequate relief of their IBS-D symptoms (P=0.31). Though there was no significant difference in the proportion of composite end point responders (P=0.13), the low FODMAP diet resulted in a higher proportion of abdominal pain responders compared with the mNICE group (51% vs. 23%, P=0.008). Compared with baseline scores, the low FODMAP diet led to greater reductions in average daily scores of abdominal pain, bloating

Nice Work de David Lodge : Un « Condition of England novel » des années 1980 ? Nice Work: A « Condition of England novel » of the 1980s?

Directory of Open Access Journals (Sweden)

Armelle Parey

2009-11-01

Full Text Available In Nice Work, David Lodge appropriates the model of the « condition-of-England novel » which he transposes into the 1980s. More than a mere transposition, Nice Work turns out to be an open rewriting of the Victorian novels quoted in epigraphs since the text, with its comical aspect and its auto-reflexive dimension, distances itself from realism. Far from being innocent, this rewriting considers critically the Thatcher era as well as contemporary literary theory and gives a discerning homage to Victorian novels.

Solvent engineering and other reaction design methods for favouring enzyme-catalysed synthesis

DEFF Research Database (Denmark)

Zeuner, Birgitte

. However, both FAEs catalysed the feruloylation and/or sinapoylation of solvent cation C2OHMIm+, thus underlining the broad acceptor specificity of FAEs and their potential for future solvent reactions. An engineered sialidase from Trypanosoma rangeli, Tr6, catalyses trans-sialylation but the yield......This thesis investigates different methods for improving reaction yields of enzyme-catalysed synthesis reactions. These methods include the use of non-conventional media such as ionic liquids (ILs) and organic solvents as main solvents or as co-solvents as well as the use of more classical reaction...... design methods, i.e. enzyme immobilization and the use of an enzymatic membrane reactor. Two different enzyme classes, namely feruloyl esterases (FAEs) and sialidases are employed. Using sinapoylation of glycerol as a model reaction it was shown that both the IL anion nature and the FAE structure were...

Prehrana in telesna aktivnost nosečnice

OpenAIRE

Ciglar, Ksenija

2012-01-01

V diplomskem delu smo predstavili nosečnost kot stanje fizioloških in psiholoških sprememb ter prehrano in telesno aktivnost nosečnice. Zdrava in uravnotežena prehrana je pomembna v vseh življenjskih obdobjih ženske, še posebej pa pred nosečnostjo, v nosečnosti in v času laktacije. Telesna ali športna dejavnost pa vpliva pozitivno na nosečničino zdravje in dobro počutje. Diplomsko delo je sestavljeno iz dveh delov. V prvem (teoretičnem) delu je predstavljena fiziologija nosečnosti, prehrana ...

Ruxolitinib for the treatment of myelofibrosis: a NICE single technology appraisal.

Science.gov (United States)

Wade, Ros; Rose, Micah; Neilson, Aileen Rae; Stirk, Lisa; Rodriguez-Lopez, Rocio; Bowen, David; Craig, Dawn; Woolacott, Nerys

2013-10-01

The National Institute for Health and Care Excellence (NICE) invited the manufacturer of ruxolitinib (Novartis) to submit clinical and cost-effectiveness evidence for ruxolitinib within its licensed indication (the treatment of disease-related splenomegaly or symptoms in adult patients with myelofibrosis), according to the Institute's Single Technology Appraisal process. The Centre for Reviews and Dissemination and Centre for Health Economics at the University of York were commissioned to act as the independent Evidence Review Group (ERG). This article provides a description of the company submission, the ERG review and the resulting NICE guidance TA289 issued in June 2013. The ERG critically reviewed the evidence presented in the manufacturer's submission and identified areas requiring clarification, for which the manufacturer provided additional evidence. The main clinical effectiveness data were derived from two phase III, multicentre, randomised controlled trials (RCTs): Controlled myelofibrosis study with oral JAK inhibitor treatment (COMFORT)-II compared ruxolitinib with best available therapy (BAT), and COMFORT-I compared ruxolitinib with placebo. These RCTs demonstrated that ruxolitinib confers significant benefits in terms of spleen size reduction and improvement in symptom burden. In the COMFORT-II trial, a reduction in spleen volume of ≥35 % was achieved in 28 % of ruxolitinib-treated patients compared with 0 % of patients in the BAT group (p Service (NHS) resources for treating disease-related splenomegaly or symptoms in adults with myelofibrosis. Ruxolitinib is not recommended for the treatment of disease-related splenomegaly or symptoms in adult patients with primary myelofibrosis (also known as chronic idiopathic myelofibrosis), post-polycythaemia vera myelofibrosis and post-essential thrombocythaemia myelofibrosis in NICE TA289.

Sunlit Uplands: The Genius of the NICE Reference Case

Directory of Open Access Journals (Sweden)

Paul C Langley

2016-07-01

Full Text Available The NICE reference case has received widespread acceptance in health technology assessment. The lifetime cost-per-QALY model and constructed claims for product impact have been widely emulated in country-specific guidelines for formulary submission as well as in publications in the leading health technology journals. Unfortunately, from the perspective of the standards of normal science, adherence to the reference case standard means that the claims made are typically non-evaluable. They have to be taken at face value. They may suggest potential evaluable hypotheses for clinical and cost-effectiveness claims, but there is no requirement in the reference case for claims to be put in an evaluable form and for manufacturers to suggest possible protocols for product impact assessment. This is not an acceptable situation. Absent the standards for falsification and replication, which are at the core of the scientific method, we have no idea whether the claims accepted by NICE are right or even if they are wrong. If we accept the reference case paradigm should we conclude that the sunlit uplands of formulary decisions based on non-evaluable simulated claims for cost-effectiveness has been reached? Have we rejected natural selection in favor of intelligent design? Conflict of Interest None Type: Commentary

NICE recommendations for the assessment of stable chest pain: assessing the early economic and service impact in the rapid-access chest pain service.

Science.gov (United States)

Ashrafi, Reza; Raga, Santosh; Abdool, Ali; Disney, Andrew; Wong, Peter; Davis, Gershan K

2013-05-01

In 2010, guidelines published by the National Institute for Clinical Excellence (NICE) suggested a change in the way patients with stable chest pain of suspected cardiac origin were investigated. These guidelines removed exercise treadmill testing from routine use and introduced cardiac CT to regular use. To investigate whether these guidelines had improved our service provision by reducing the number of further investigations required to make a diagnosis, and to see if our costs had increased now that the less expensive exercise treadmill tests were not recommended. Clinic letters were used to assess patients pretest likelihood of coronary artery disease for two six-month cohorts of consecutive patients seen in the rapid access chest pain clinic (January-June 2010 and July-December 2011) using NICE published methodology, and to ascertain which investigations patients had. Using NICE modelled costs, we generated comparative hypothetical costs for each cohort and an average cost per patient. In the January-June 2010 cohort, 435 patients with chest pain were seen, and in July-December 2011, 334 patients were seen. In the pre-NICE guidelines cohort, 23% of patients required two investigations as compared with 11.4% in the post-NICE guidelines cohort, with no patient requiring three investigations as compared with 3% in the original cohort. There was no significant increase in costs per patient in the post-NICE guidance group. Implementing NICE guidance reduced the number of investigations needed per patient, and did not prove more expensive for our department in the short term.

Tuberculin skin testing: Spectrum of adverse reactions.

Science.gov (United States)

Praveen, Ramar; Bahuguna, Amit; Dhadwal, Bhumesh Singh

2015-01-01

Tuberculin skin testing (TST) is one of the primary diagnostic modalities recommended by the World Health Organization (WHO) and the National Institute for Health and Care Excellence (NICE) study conducted in the United Kingdom (UK) for diagnosing tuberculosis (TB). Even after acceptance as a diagnostic modality and stern standardization, TST has its own flaws that include a spectrum of adverse reactions. We report a series of cases with a spectrum of adverse reactions occurring with a higher frequency than present in the available evidence. The study has some demerits such as being a retrospective one with interobserver variation and lack of histopathological confirmation. The observation is presented to accentuate the fact that adverse reactions are not a rarity and that further studies are required to establish the cause and exact incidence of the same.

Golimumab for the treatment of ankylosing spondylitis : a NICE single technology appraisal

NARCIS (Netherlands)

Armstrong, Nigel; Joore, Manuela; van Asselt, Thea; Misso, Kate; Manning, Nathan; Tomini, Florian; Kleijnen, Jos; Riemsma, Rob

As part of the National Institute for Health and Clinical Excellence (NICE) single technology appraisal (STA) process, the Evidence Review Group (ERG) produced a report to comment on the clinical and cost effectiveness of golimumab (Simponi(®), Merck Sharp & Dohme) for the treatment of ankylosing

NICE guidelines for imaging studies in children with UTI adequate only in boys under the age of 6 months.

Science.gov (United States)

Ristola, Marko Tapani; Hurme, Timo

2013-03-01

The purpose of this study was to evaluate the applicability of the National Institute for Health and Clinical Excellence (NICE) guidelines for imaging studies in children under the age of three with first urinary tract infection (UTI). In our cohort of 112 patients, we gathered data regarding the occurrence of indications for ultrasonography (US) and voiding cystourethrography (VCUG) according to the NICE guidelines, dimercaptosuccinic acid (DMSA) scintigraphy examinations, UTI recurrence, antimicrobial prophylaxis (AMP), anti-reflux procedures, and other urological procedures. If the NICE guidelines had been applied, 13 of the 25 patients (52 %) with vesicoureteral reflux (VUR), including 6 of the 12 patients (50 %) with dilating VUR and 3 of the 4 patients who underwent endoscopic anti-reflux treatment, would have been missed, and a negative VCUG would have been avoided in 25 of the 42 patients (60 %) with no VUR. None of the missed diagnoses occurred in the younger boys' group. Based on these preliminary analyses, we feel that the NICE guidelines for imaging studies in children under 3 years old with UTI may be applicable to clinical use only in boys under 6 months of age. For other patients the guidelines were unsuccessful.

A Performance Evaluation for IT/IS Implementation in Organisation: Preliminary New IT/IS Capability Evaluation (NICE Model

Directory of Open Access Journals (Sweden)

Hafez Salleh

2011-12-01

Full Text Available Most of the traditional IT/IS performance measures are based on productivity and process, which mainly focus on method of investment appraisal. There is a need to produce alternative holistic measurement models that enable soft and hard issues to be measured qualitatively. A New IT/IS Capability Evaluation (NICE framework has been designed to measure the capability of organisations to'successfully implement IT systems' and it is applicable across industries.The idea is to provide managers with measurement tools to enable them to identify where improvements are required within their organisations and to indicate their readiness prior to IT investment. The NICE framework investigates four organisational key elements: IT, Environment, Process and People, and is composed of six progressive stages of maturity that a company can achieve its IT/IS capabilities. For each maturity stage, the NICE framework describes a set of critical success factors that must be in place for the company to achieve each stage.

Near wall combustion modeling in spark ignition engines. Part B: Post-flame reactions

International Nuclear Information System (INIS)

Demesoukas, Sokratis; Caillol, Christian; Higelin, Pascal; Boiarciuc, Andrei; Floch, Alain

2015-01-01

Highlights: • Models for the post flame reactions (CO and hydrocarbons) and heat release rate are proposed. • ‘Freezing’ effect of CO kinetics is captured but equilibrium CO concentrations are low. • Reactive–diffusive processes are modeled for hydrocarbons and the last stage of combustion is captured. - Abstract: Reduced fuel consumption, low pollutant emissions and adequate output performance are key features in the contemporary design of spark ignition engines. Zero-dimensional numerical simulation is an attractive alternative to engine experiments for the evaluation of various engine configurations. Both flame front reaction and post-flame processes contribute to the heat release rate. The contribution of this work is to highlight and model the role of post-flame reactions (CO and hydrocarbons) in the heat release rate. The modeling approach to CO kinetics used two reactions considered to be dominant and thus more suitable for the description of CO chemical mechanism. Equilibrium concentrations of all the species involved were calculated by a two-zone thermodynamic model. The computed characteristic time of CO kinetics was found to be of a similar order to the results of complex chemistry simulations. The proposed model captured the ‘freezing’ effect (reaction rate is almost zero) for temperatures lower than 1800 K and followed the trends of the measured values at exhaust. However, a consistent underestimation of CO levels at the exhaust was observed. The impact of the remaining CO on the combustion efficiency is considerable especially for rich mixtures. For a remaining 0.4% CO mass fraction, the impact on combustion inefficiency is 0.1%. Unburnt hydrocarbon, which have not reacted within the flame front before quenching, diffuse in the burnt gas and react. In this work, a global reaction rate models the kinetic behavior of hydrocarbon. The diffusion process was modeled by a relaxation equation applied on the calculated kinetic concentration

Radiological assessment of paediatric cervical spine injury in blunt trauma: the potential impact of new NICE guidelines on the use of CT

International Nuclear Information System (INIS)

Davies, J.; Cross, S.; Evanson, J.

2016-01-01

Aim: To determine the potential effect of changes to the National Institute for Health and Care Excellence (NICE) guidelines to the use of computed tomography (CT) in the assessment of suspected paediatric cervical spine (c-spine) injury. Material and methods: A 5 year retrospective study was conducted of c-spine imaging in paediatric (<10 years) patients presenting following blunt trauma at a Level 1 trauma centre in London. All patients under the age of 10 years who underwent any imaging of the c-spine following blunt trauma were included. Clinical data relating to the presenting signs and symptoms were obtained from the retrospective review of electronic records and paper notes. This was then applied to the previous NICE guideline (CG56) and to the new NICE guideline (CG176). Patients with incomplete data were excluded. Results: Two hundred and seventy-eight patients <10 years underwent imaging of the c-spine following blunt trauma. Two hundred and seventy (97.12%) examinations had complete data and were included in further analysis. One hundred and forty-nine (55.19%) met the criteria for a CT of the c-spine under NICE CG56, whereas 252 (93.33%) met the updated NICE CG176 criteria for c-spine CT. Five (1.85%) patients had a c-spine injury and met the criteria under both CG56 and CG176 NICE guidelines. Conclusion: Recent changes to NICE Head Injury Guidelines relating to radiological assessment of paediatric c-spine following blunt trauma are likely to result in an increased usage of CT as the initial radiological investigation over plain radiographs, without an apparent increase in specificity in the present series. - Highlights: • Paediatric CSI is a rare but serious consequence of blunt trauma. • New NICE 176 criteria broadened the criteria for c-spine CT following trauma. • 69% more patients may be eligible for assessment with CT under new guidelines. • 5 cases of CSI occurred in this series of 278 paediatric trauma cases. • All 5 cases met CG176

Noise-immune cavity-enhanced analytical atomic spectrometry - NICE-AAS - A technique for detection of elements down to zeptogram amounts

Science.gov (United States)

Axner, Ove; Ehlers, Patrick; Hausmaninger, Thomas; Silander, Isak; Ma, Weiguang

2014-10-01

Noise-immune cavity-enhanced optical heterodyne molecular spectroscopy (NICE-OHMS) is a powerful technique for detection of molecular compounds in gas phase that is based on a combination of two important concepts: frequency modulation spectroscopy (FMS) for reduction of noise, and cavity enhancement, for prolongation of the interaction length between the light and the sample. Due to its unique properties, it has demonstrated unparalleled detection sensitivity when it comes to detection of molecular constituents in the gas phase. However, despite these, it has so far not been used for detection of atoms, i.e. for elemental analysis. The present work presents an assessment of the expected performance of Doppler-broadened (Db) NICE-OHMS for analytical atomic spectrometry, then referred to as noise-immune cavity-enhanced analytical atomic spectrometry (NICE-AAS). After a description of the basic principles of Db-NICE-OHMS, the modulation and detection conditions for optimum performance are identified. Based on a previous demonstrated detection sensitivity of Db-NICE-OHMS of 5 × 10- 12 cm- 1 Hz- 1/2 (corresponding to a single-pass absorbance of 7 × 10- 11 over 10 s), the expected limits of detection (LODs) of Hg and Na by NICE-AAS are estimated. Hg is assumed to be detected in gas phase directly while Na is considered to be atomized in a graphite furnace (GF) prior to detection. It is shown that in the absence of spectral interferences, contaminated sample compartments, and optical saturation, it should be feasible to detect Hg down to 10 zg/cm3 (10 fg/m3 or 10- 5 ng/m3), which corresponds to 25 atoms/cm3, and Na down to 0.5 zg (zg = zeptogram = 10- 21 g), representing 50 zg/mL (parts-per-sextillion, pps, 1:1021) in liquid solution (assuming a sample of 10 μL) or solely 15 atoms injected into the GF, respectively. These LODs are several orders of magnitude lower (better) than any previous laser-based absorption technique previously demonstrated under atmospheric

Energy efficiency as an example of cross-discipline collaboration in chemical engineering

DEFF Research Database (Denmark)

de Hemptinne, J.-C; Ferrasse, J.-H.; Górak, A.

2017-01-01

This paper summarizes the round-table discussion that was held during the European Congress of Chemical Engineering (ECCE) in Nice, France, in October 2015 on this topic. The panellists come from different fields of chemical engineering and have thus brought in different perspectives. The objective...... (industrials, mostly market-driven, or academic), or in terms of discipline. The role of professional societies as the European Federation for Chemical Engineers (EFCE) is stressed as a promotor of collaboration between disciplines.Finally, once willingness for collaboration is identified, the final question...

New recommendations for management of eating disorders (anorexia nervosa, bulimia nervosa from NICE

Directory of Open Access Journals (Sweden)

Vitaliy Bezsheiko

2017-08-01

Full Text Available The UK's National Institute for Health and Care Excellence (NICE, one of the most authoritative institutions in the field of evidence-based medicine, has issued standards for management of patients with anorexia and bulimia nervosa.

2nd International Conference on Mechatronics and Robotics Engineering

CERN Document Server

Wei, Bin

2017-01-01

Featuring selected contributions from the 2nd International Conference on Mechatronics and Robotics Engineering, held in Nice, France, February 18–19, 2016, this book introduces recent advances and state-of-the-art technologies in the field of advanced intelligent manufacturing. This systematic and carefully detailed collection provides a valuable reference source for mechanical engineering researchers who want to learn about the latest developments in advanced manufacturing and automation, readers from industry seeking potential solutions for their own applications, and those involved in the robotics and mechatronics industry.

Association between NICE guidance on biologic therapies with rates of hip and knee replacement among rheumatoid arthritis patients in England and Wales

DEFF Research Database (Denmark)

Hawley, Samuel; Cordtz, René; Dreyer, Lene

2018-01-01

OBJECTIVE: To estimate the impact of NICE approval of tumor necrosis factor inhibitor (TNFi) therapies on the incidence of total hip replacement (THR) and total knee replacement (TKR) among rheumatoid arthritis (RA) patients in England and Wales. METHODS: Primary care data [Clinical Practice.......92 PYs, respectively. NICE guidance was associated with a significant average decrease in TKR incidence of -4.41/1000 PYs (95% C.I. -6.88 to -1.94), equating to a relative 34% reduction. Overall, no effect was seen on THR rates. CONCLUSIONS: Among incident RA patients in England and Wales, NICE guidance...

Noise-immune cavity-enhanced analytical atomic spectrometry — NICE-AAS — A technique for detection of elements down to zeptogram amounts

International Nuclear Information System (INIS)

Axner, Ove; Ehlers, Patrick; Hausmaninger, Thomas; Silander, Isak; Ma, Weiguang

2014-01-01

Noise-immune cavity-enhanced optical heterodyne molecular spectroscopy (NICE-OHMS) is a powerful technique for detection of molecular compounds in gas phase that is based on a combination of two important concepts: frequency modulation spectroscopy (FMS) for reduction of noise, and cavity enhancement, for prolongation of the interaction length between the light and the sample. Due to its unique properties, it has demonstrated unparalleled detection sensitivity when it comes to detection of molecular constituents in the gas phase. However, despite these, it has so far not been used for detection of atoms, i.e. for elemental analysis. The present work presents an assessment of the expected performance of Doppler-broadened (Db) NICE-OHMS for analytical atomic spectrometry, then referred to as noise-immune cavity-enhanced analytical atomic spectrometry (NICE-AAS). After a description of the basic principles of Db-NICE-OHMS, the modulation and detection conditions for optimum performance are identified. Based on a previous demonstrated detection sensitivity of Db-NICE-OHMS of 5 × 10 −12 cm −1 Hz −1∕2 (corresponding to a single-pass absorbance of 7 × 10 −11 over 10 s), the expected limits of detection (LODs) of Hg and Na by NICE-AAS are estimated. Hg is assumed to be detected in gas phase directly while Na is considered to be atomized in a graphite furnace (GF) prior to detection. It is shown that in the absence of spectral interferences, contaminated sample compartments, and optical saturation, it should be feasible to detect Hg down to 10 zg/cm 3 (10 fg/m 3 or 10 −5 ng/m 3 ), which corresponds to 25 atoms/cm 3 , and Na down to 0.5 zg (zg = zeptogram = 10 −21 g), representing 50 zg/mL (parts-per-sextillion, pps, 1:10 21 ) in liquid solution (assuming a sample of 10 μL) or solely 15 atoms injected into the GF, respectively. These LODs are several orders of magnitude lower (better) than any previous laser-based absorption technique previously demonstrated

Peer teaching and information retrieval: the role of the NICE Evidence search student champion scheme in enhancing students' confidence.

Science.gov (United States)

Sbaffi, Laura; Hallsworth, Elaine; Weist, Anne

2018-03-01

This research reports on the NICE Evidence search (ES) student champion scheme (SCS) first five years of activity (2011-2016) in terms of its impact on health care undergraduate students' information search skills and search confidence. A review of students' evaluation of the scheme was carried out to chart the changes in attitude towards NICE Evidence search as an online health care information source and to monitor students' approach to information seeking. This study is based on the results of questionnaires distributed to students before and after attending a training session on NICE Evidence search delivered by their own peers. The exercise was implemented in health related universities in England over a period of five consecutive academic years. (i) Students' search confidence improved considerably after the training; (ii) ES was perceived as being an increasingly useful resource of evidence based information for their studies; (iii) the training helped students develop discerning search skills and use evidence based information sources more consistently and critically. The NICE SCS improves confidence in approaching information tasks amongst health care undergraduate students. Future developments could involve offering the training at the onset of a course of study and adopting online delivery formats to expand its geographical reach. © 2018 Health Libraries Group.

A Review of NICE Methods and Processes Across Health Technology Assessment Programmes: Why the Differences and What is the Impact?

Science.gov (United States)

Cowles, Emma; Marsden, Grace; Cole, Amanda; Devlin, Nancy

2017-08-01

Decisions made by the National Institute for Health and Care Excellence (NICE) exert an influence on the allocation of resources within 'fixed' National Health Service budgets. Yet guidance for different types of health interventions is handled via different 'programmes' within NICE, which follow different methods and processes. The objective of this research was to identify differences in the processes and methods of NICE health technology assessment programmes and to explore how these could impact on allocative efficiency within the National Health Service. Data were extracted from the NICE technology appraisal programme, medical technologies guidance, diagnostic assessment programme, highly specialised technologies programme, and clinical guidelines process and methods manuals to undertake a systematic comparison. Five qualitative interviews were carried out with NICE members of staff and committee members to explore the reasons for the differences found. The main differences identified were in the required evidence review period, or lack thereof, mandatory funding status, the provision of a reference case for economic evaluation, the requirement for and the type of economic analysis undertaken, and the decision making criteria used for appraisal. Many of the differences found can be justified on grounds of practicality and relevance to the health technologies under assessment. Nevertheless, from a strict utilitarian view, there are several potential areas of inefficiency that could lead to the misallocation of resources within the National Health Service, although some of these might be eliminated or reduced if an egalitarian view is taken. The challenge is determining where society is willing to trade health gains between different people.

Pemberian paket gizi masyarakat proyek NICE berpengaruh terhadap kinerja posyandu, tetapi tidak meningkatkan status gizi balita di Provinsi NTB

Directory of Open Access Journals (Sweden)

Solikin Solikin

2016-08-01

Full Text Available ABSTRACTBackground: The province of NTB had the prevalence of underweight 30.5% in 2010 for children under five, this figure is above the national prevalence. A nutrition improvement through community empowerment (NICE has been developed aimed to supporting community nutrition service to overcome nutrition and health problem independently. One of the programs is CNP (community nutrition package which got the highest fund allocation compared to other NICE program.Objectives: To evaluate the effect of CNP supplementation in NTB Province to the increase of nutritional status of children under five through index of weight by age and performance of posyandu.Methods: The study was evaluative with quantitative and qualitative method and one group pre and post test design, from January to April 2012 at 4 districts/ municipalities area of NICE Project, comprising 72 villages/cities that received CNP in 533 posyandu with 7,975 of children under fives. Posyandu’s performance was measured by baseline data collection for NICE project questionairre, weight measured by scale, and indepth interview was made to individuals administering CNP before and after receiving the package. Samples were randomly selected. Data analysis used paired t-test.Results: There was significant difference in performance of posyandu (p< 0.001, 95% CI: 9.88-11.05 and nutritional status of children under five based on index of weight/age (p<0.001, 95% CI: -1.23 to -1.32 before and after CNP supplementation. CNP supplementation increased performance of posyandu, but did not increase the nutritional status of children under five (index of weight/age. There were supporting factors of community nutrition supplementation such as human resources, participation across sectors, villages and community/religious leaders and integration with other programs (PNPM-Mandiri, GSC, local budget.Conclusions: CNP supplementation affected performance of posyandu but did not increase nutritional status

The Type and Impact of Evidence Review Group Exploratory Analyses in the NICE Single Technology Appraisal Process.

Science.gov (United States)

Carroll, Christopher; Kaltenthaler, Eva; Hill-McManus, Daniel; Scope, Alison; Holmes, Michael; Rice, Stephen; Rose, Micah; Tappenden, Paul; Woolacott, Nerys

2017-06-01

As part of the UK National Institute for Health and Care Excellence (NICE) single technology appraisal process, independent evidence review groups (ERGs) critically appraise a company's submission relating to a specific technology and indication. To explore the type of additional exploratory analyses conducted by ERGs and their impact on the recommendations made by NICE. The 100 most recently completed single technology appraisals with published guidance were selected for inclusion. A content analysis of relevant documents was undertaken to identify and extract relevant data, and narrative synthesis was used to rationalize and present these data. The types of exploratory analysis conducted in relation to companies' models were fixing errors, addressing violations, addressing matters of judgment, and the provision of a new, ERG-preferred base case. Ninety-three of the 100 ERG reports contained at least one of these analyses. The most frequently reported type of analysis in these 93 ERG reports related to the category "Matters of judgment," which was reported in 83 reports (89%). At least one of the exploratory analyses conducted and reported by an ERG is mentioned in 97% of NICE appraisal consultation documents and 94% of NICE final appraisal determinations, and had a clear influence on recommendations in 72% of appraisal consultation documents and 47% of final appraisal determinations. These results suggest that the additional analyses undertaken by ERGs in the appraisal of company submissions are highly influential in the policy-making and decision-making process. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Existence of solutions to differential inclusions with primal lower nice functions

Directory of Open Access Journals (Sweden)

Nora Fetouci

2016-02-01

Full Text Available We prove the existence of absolutely continuous solutions to the differential inclusion $$ \\dot{x}(t\\in F(x(t+h(t,x(t, $$ where F is an upper semi-continuous set-valued function with compact values such that $F(x(t\\subset \\partial f(x(t$ on [0,T], where f is a primal lower nice function, and h a single valued Caratheodory perturbation.

Experience with the NICE Guidelines for Imaging Studies in Children with First Pyelonephritis

DEFF Research Database (Denmark)

Lytzen, R; Thorup, Jørgen Mogens; Cortes, D

2011-01-01

PURPOSE: This retrospective study evaluates the applicability of a selective approach for imaging in children aged 0-15 years with a first episode of pyelonephritis, based on the UTI guidelines of the National Institute for Health and Clinical Excellence (NICE). MATERIAL AND METHODS: A total of 96...

Failure is an option: Reactions to failure in elementary engineering design projects

Science.gov (United States)

Johnson, Matthew M.

Recent reform documents in science education have called for teachers to use epistemic practices of science and engineering researchers to teach disciplinary content (NRC, 2007; NRC, 2012; NGSS Lead States, 2013). Although this creates challenges for classroom teachers unfamiliar with engineering, it has created a need for high quality research about how students and teachers engage in engineering activities to improve curriculum development and teaching pedagogy. While framers of the Next Generation Science Standards (NRC, 2012; NGSS Lead States 2013) focused on the similarities of the practices of science researchers and engineering designers, some have proposed that engineering has a unique set of epistemic practices, including improving from failure (Cunningham & Carlsen, 2014; Cunningham & Kelly, in review). While no one will deny failures occur in science, failure in engineering is thought of in fundamentally different ways. In the study presented here, video data from eight classes of elementary students engaged in one of two civil engineering units were analyzed using methods borrowed from psychology, anthropology, and sociolinguistics to investigate: 1) the nature of failure in elementary engineering design; 2) the ways in which teachers react to failure; and 3) how the collective actions of students and teachers support or constrain improvement in engineering design. I propose new ways of considering the types and causes of failure, and note three teacher reactions to failure: the manager, the cheerleader, and the strategic partner. Because the goal of iteration in engineering is improvement, I also studied improvement. Students only systematically improve when they have the opportunity, productive strategies, and fair comparisons between prototypes. I then investigate the use of student engineering journals to assess learning from the process of improvement after failure. After discussion, I consider implications from this work as well as future research

Oxidative coupling of methane. Still a challenge for catalyst development and reaction engineering

Energy Technology Data Exchange (ETDEWEB)

Schomaecker, R.; Arnd, S.; Beck, B. [Technical Univ. of Berlin (Germany). Dept. of Chemistry] [and others

2013-11-01

The oxidative coupling of methane to ethylene offers great industrial potential, because it would broaden the feedstock basis for chemical industry. Because methane is the most stable hydrocarbon, its activation requires high temperatures and it is a great scientific challenge to overcome the apparent yield limit of about 25%. This barrier has never been exceeded since the beginning of OCM research more than 20 years ago. Results and Discussion: This challenge is one of the key projects of the Cluster of Excellence UNICAT and requires joined efforts and contributions from many disciplines, because this reaction shows a combined surface/gas phase reaction mechanism which results in very unusual and complex dependencies on the reaction conditions. Although dozens of materials are known to catalyze the reaction, the selection of a catalyst suitable for an industrial process is difficult, due to severe stability problems of many materials. Li/MgO was chosen by the UNICAT-team as model catalyst, because of the extended literature about it. But it shows uncontrollable deactivation, no matter what precursor and method were used for its preparation. Nevertheless, it is a suitable catalyst for fundamental studies, due to its formal chemical simplicity. A key result of the joined research activities was the disproval of the Lunsford mechanism and the elucidation of the real function of lithium as a surface modifier creating a rough and defect-rich surface. For the development of an OCM process another catalyst, Na{sub 2}WO{sub 4}/Mn/SiO{sub 2}, was chosen from the rich literature on OCM. Although less is known about its structure and the reaction mechanism at this catalyst, its stability was the most important reason to select it for further engineering studies. Kinetic isotope measurements and studies in a TAP reactor demonstrate the similarity of the reaction mechanisms at both catalysts, despite the completely different materials. The selectivity is largely controlled by

The NHS: assessing new technologies, NICE and value for money.

Science.gov (United States)

Stevens, A; Chalkidou, K; Littlejohns, P

2011-06-01

The healthcare system in the UK, essentially the NHS, is an open economic system subject to the same pressures as any other economic system. The pressures concern limited resources coupled with powerful drivers for increasing spending: invention, demography and inflation. There have only ever been three types of economic system: steady state (everything, as in a feudal system, stays as it was the year before), market capitalism (supply and demand are allowed to find their own equilibrium) and some version of central planning. In healthcare, most advanced countries favour the last of the three. This is for three reasons: distribution (not only are the poor less able to pay for sickness, but sickness exacerbates poverty), information (markets operate poorly when providers can easily outsmart customers) and externalities (it is in the interest of everyone that infectious diseases and the other knock-on consequences of ill health are ameliorated). So in the UK, the state, with a good deal of cross-party consensus, directs most of health service supply. This system has become more complex over the decades since the formation of the NHS in 1948. A notable element of the complexity is the regulation of the introduction of new technologies. A key element of the regulatory system has been the National Institute for Health and Clinical Excellence (NICE), and a key aspect of NICE's decisions has been not just value, but also value for money. This has not been without controversy.

Impact of the QOF and the NICE guideline in the diagnosis and management of depression: a qualitative study.

Science.gov (United States)

Mitchell, Caroline; Dwyer, Rachel; Hagan, Teresa; Mathers, Nigel

2011-05-01

The National Institute for Health and clinical Excellence (NICE) depression guideline (2004) and the updated Quality and Outcomes Framework (QOF) (2006) in general practice have introduced the concepts of screening severity assessment, for example using the Patient Health Questionnaire 9 (PHQ-9), and 'stepped care' for depression. To explore primary care practitioner perspectives on the clinical utility of the NICE guideline and the impact of the QOF on diagnosis and management of depression in routine practice. Qualitative study using focus groups from four multidisciplinary practice teams with diverse populations in south Yorkshire. Four focus groups were conducted, using a topic guide and audiotaping. There were 38 participants: GPs, nurses, doctors in training, mental health workers, and a manager. Data analysis was iterative and thematic. The NICE guideline, with its embedded principles of holism and evidence-based practice, was viewed positively but its impact was compromised by resource and practitioner barriers to implementation. The perceived imposition of the screening questions and severity assessments (PHQ-9) with no responsive training had required practitioners to work hard to minimise negative impacts on their work, for example: constantly adapting consultations to tick boxes; avoiding triggering open displays of distress without the time to offer appropriate care; positively managing how their patients were labelled. Further confusion was experienced around the evolving content of psychological interventions for depression. Organisational barriers to the implementation of the NICE guideline and the limited scope of the QOF highlight the need for policy makers to work more effectively with the complex realities of general practice in order to systematically improve the quality and delivery of 'managed' care for depression.

SN2 fluorination reactions in ionic liquids: a mechanistic study towards solvent engineering.

Science.gov (United States)

Oh, Young-Ho; Jang, Hyeong Bin; Im, Suk; Song, Myoung Jong; Kim, So-Yeon; Park, Sung-Woo; Chi, Dae Yoon; Song, Choong Eui; Lee, Sungyul

2011-01-21

In the catalysis of S(N)2 fluorination reactions, the ionic liquid anion plays a key role as a Lewis base by binding to the counterion Cs(+) and thereby reducing the retarding Coulombic influence of Cs(+) on the nucleophile F(-). The reaction rates also depend critically on the structures of ionic liquid cation, for example, n-butyl imidazolium gives no S(N)2 products, whereas n-butylmethyl imidazolium works well. The origin of the observed phenomenal synergetic effects by the ionic liquid [mim-(t)OH][OMs], in which t-butanol is bonded covalently to the cation [mim], is that the t-butanol moiety binds to the leaving group of the substrate, moderating the retarding interactions between the acidic hydrogen and F(-). This work is a significant step toward designing and engineering solvents for promoting specific chemical reactions.

A Simple Experiment for Teaching Process Intensification by Static Mixing in Chemical Reaction Engineering

Science.gov (United States)

Baz-Rodríguez, Sergio; Herrera-Soberanis, Natali; Rodríguez-Novelo, Miguel; Guillén-Francisc, Juana; Rocha-Uribe, José

2016-01-01

An experiment for teaching mixing intensification in reaction engineering is described. For this, a simple tubular reactor was constructed; helical static mixer elements were fabricated from stainless steel strips and inserted into the reactor. With and without the internals, the equipment operates as a static mixer reactor or a laminar flow…

Secondary prevention for patients following a myocardial infarction: summary of NICE guidance

OpenAIRE

Skinner, J S; Cooper, A; Feder, G S

2007-01-01

Mortality from coronary heart disease has been falling in the UK since the 1970s, but remains higher than in most other Western countries. Most patients receive some treatment for secondary prevention after myocardial infarction, but not all patients are offered the most effective secondary prevention package. The recently published NICE guideline for secondary prevention in patients after myocardial infarction, summarised in this article, makes clear recommendations for management of patient...

Molecular Modeling as a Self-Taught Component of a Conventional Undergraduate Chemical Reaction Engineering Course

Science.gov (United States)

Rothe, Erhard W.; Zygmunt, William E.

2016-01-01

We inserted a self-taught molecular modeling project into an otherwise conventional undergraduate chemical-reaction-engineering course. Our objectives were that students should (a) learn with minimal instructor intervention, (b) gain an appreciation for the relationship between molecular structure and, first, macroscopic state functions in…

NASA Nice Climate Change Education

Science.gov (United States)

Frink, K.; Crocker, S.; Jones, W., III; Marshall, S. S.; Anuradha, D.; Stewart-Gurley, K.; Howard, E. M.; Hill, E.; Merriweather, E.

2013-12-01

Authors: 1 Kaiem Frink, 4 Sherry Crocker, 5 Willie Jones, III, 7 Sophia S.L. Marshall, 6 Anuadha Dujari 3 Ervin Howard 1 Kalota Stewart-Gurley 8 Edwinta Merriweathe Affiliation: 1. Mathematics & Computer Science, Virginia Union University, Richmond, VA, United States. 2. Mathematics & Computer Science, Elizabeth City State Univ, Elizabeth City, NC, United States. 3. Education, Elizabeth City State University, Elizabeth City, NC, United States. 4. College of Education, Fort Valley State University , Fort Valley, GA, United States. 5. Education, Tougaloo College, Jackson, MS, United States. 6. Mathematics, Delaware State University, Dover, DE, United States. 7. Education, Jackson State University, Jackson, MS, United States. 8. Education, Alabama Agricultural and Mechanical University, Huntsville, AL, United States. ABSTRACT: In this research initiative, the 2013-2014 NASA NICE workshop participants will present best educational practices for incorporating climate change pedagogy. The presentation will identify strategies to enhance instruction of pre-service teachers to aligned with K-12 Science, Technology, Engineering and Mathematics (STEM) standards. The presentation of best practices should serve as a direct indicator to address pedagogical needs to include climate education within a K-12 curriculum Some of the strategies will include inquiry, direct instructions, and cooperative learning . At this particular workshop, we have learned about global climate change in regards to how this is going to impact our life. Participants have been charged to increase the scientific understanding of pre-service teachers education programs nationally to incorporate climate education lessons. These recommended practices will provide feasible instructional strategies that can be easily implemented and used to clarify possible misconceptions and ambiguities in scientific knowledge. Additionally, the presentation will promote an awareness to the many facets in which climate

Sensitivity analysis in economic evaluation: an audit of NICE current practice and a review of its use and value in decision-making.

Science.gov (United States)

Andronis, L; Barton, P; Bryan, S

2009-06-01

To determine how we define good practice in sensitivity analysis in general and probabilistic sensitivity analysis (PSA) in particular, and to what extent it has been adhered to in the independent economic evaluations undertaken for the National Institute for Health and Clinical Excellence (NICE) over recent years; to establish what policy impact sensitivity analysis has in the context of NICE, and policy-makers' views on sensitivity analysis and uncertainty, and what use is made of sensitivity analysis in policy decision-making. Three major electronic databases, MEDLINE, EMBASE and the NHS Economic Evaluation Database, were searched from inception to February 2008. The meaning of 'good practice' in the broad area of sensitivity analysis was explored through a review of the literature. An audit was undertaken of the 15 most recent NICE multiple technology appraisal judgements and their related reports to assess how sensitivity analysis has been undertaken by independent academic teams for NICE. A review of the policy and guidance documents issued by NICE aimed to assess the policy impact of the sensitivity analysis and the PSA in particular. Qualitative interview data from NICE Technology Appraisal Committee members, collected as part of an earlier study, were also analysed to assess the value attached to the sensitivity analysis components of the economic analyses conducted for NICE. All forms of sensitivity analysis, notably both deterministic and probabilistic approaches, have their supporters and their detractors. Practice in relation to univariate sensitivity analysis is highly variable, with considerable lack of clarity in relation to the methods used and the basis of the ranges employed. In relation to PSA, there is a high level of variability in the form of distribution used for similar parameters, and the justification for such choices is rarely given. Virtually all analyses failed to consider correlations within the PSA, and this is an area of concern

Finanční analýza sportovního střediska Loděnice Trója UK FTVS

OpenAIRE

Ocman, Josef

2010-01-01

Title: The financial analysis of sport centre Loděnice Troja FTVS UK Annotation: The main goal of the project is to detect prosperity and utilization of sport centre Loděnice Troja FTVS UK on base of evaluation of economy of the departments and his subdepartments. The goal is achived by an analyse of accouting data and with help of metod of financial analysis. . The project was firmed up on base of order of management FTVS UK. Keywords: Financial analysis, municipal firm, ratio, calculation 3

STRUCTURE, FUNCTIONING AND PROBLEMS OF NICE NATIONAL SPORT MUSEUM OF FRANCE

OpenAIRE

Neslihan Arikan; Özbay Güven

2017-01-01

Sport is an expression tool of the culture. Historical memory of sport, with its scientific and artistic side, serves as a bridge for societies to reach large masses. In this respect, cultural and sportive movements have led to the establishment of sports museums around the world. Sports museums are a form of expression and a story of a nation. They are the most meaningful bridges between past and future generations. With these aspects, the Nice National Sports Museum of France is one of the ...

Managing conflicts of interest in the UK National Institute for Health and Care Excellence (NICE) clinical guidelines programme: qualitative study.

Science.gov (United States)

Graham, Tanya; Alderson, Phil; Stokes, Tim

2015-01-01

There is international concern that conflicts of interest (COI) may bias clinical guideline development and render it untrustworthy. Guideline COI policies exist with the aim of reducing this bias but it is not known how such policies are interpreted and used by guideline producing organisations. This study sought to determine how conflicts of interest (COIs) are disclosed and managed by a national clinical guideline developer (NICE: the UK National Institute for Health and Care Excellence). Qualitative study using semi-structured telephone interviews with 14 key informants: 8 senior staff of NICE's guideline development centres and 6 chairs of guideline development groups (GDGs). We conducted a thematic analysis. Participants regard the NICE COI policy as comprehensive leading to transparent and independent guidance. The application of the NICE COI policy is, however, not straightforward and clarity could be improved. Disclosure of COI relies on self reporting and guideline developers have to take "on trust" the information they receive, certain types of COI (non-financial) are difficult to categorise and manage and disclosed COI can impact on the ability to recruit clinical experts to GDGs. Participants considered it both disruptive and stressful to exclude members from GDG meetings when required by the COI policy. Nonetheless the impact of this disruption can be minimised with good group chairing skills. We consider that the successful implementation of a COI policy in clinical guideline development requires clear policies and procedures, appropriate training of GDG chairs and an evaluation of how the policy is used in practice.

Managing conflicts of interest in the UK National Institute for Health and Care Excellence (NICE clinical guidelines programme: qualitative study.

Directory of Open Access Journals (Sweden)

Tanya Graham

Full Text Available There is international concern that conflicts of interest (COI may bias clinical guideline development and render it untrustworthy. Guideline COI policies exist with the aim of reducing this bias but it is not known how such policies are interpreted and used by guideline producing organisations. This study sought to determine how conflicts of interest (COIs are disclosed and managed by a national clinical guideline developer (NICE: the UK National Institute for Health and Care Excellence.Qualitative study using semi-structured telephone interviews with 14 key informants: 8 senior staff of NICE's guideline development centres and 6 chairs of guideline development groups (GDGs. We conducted a thematic analysis.Participants regard the NICE COI policy as comprehensive leading to transparent and independent guidance. The application of the NICE COI policy is, however, not straightforward and clarity could be improved. Disclosure of COI relies on self reporting and guideline developers have to take "on trust" the information they receive, certain types of COI (non-financial are difficult to categorise and manage and disclosed COI can impact on the ability to recruit clinical experts to GDGs. Participants considered it both disruptive and stressful to exclude members from GDG meetings when required by the COI policy. Nonetheless the impact of this disruption can be minimised with good group chairing skills.We consider that the successful implementation of a COI policy in clinical guideline development requires clear policies and procedures, appropriate training of GDG chairs and an evaluation of how the policy is used in practice.

What and How Are We Evaluating? Meta-Evaluation Study of the NASA Innovations in Climate Education (NICE) Portfolio

Science.gov (United States)

Martin, A. M.; Barnes, M. H.; Chambers, L. H.; Pippin, M. R.

2013-12-01

As part of NASA's Minority University Research and Education Program (MUREP), the NASA Innovations in Climate Education (NICE) project at Langley Research Center has funded 71 climate education initiatives since 2008. The funded initiatives span across the nation and contribute to the development of a climate-literate public and the preparation of a climate-related STEM workforce through research experiences, professional development opportunities, development of data access and modeling tools, and educational opportunities in both K-12 and higher education. Each of the funded projects proposes and carries out its own evaluation plan, in collaboration with external or internal evaluation experts. Using this portfolio as an exemplar case, NICE has undertaken a systematic meta-evaluation of these plans, focused primarily on evaluation questions, approaches, and methods. This meta-evaluation study seeks to understand the range of evaluations represented in the NICE portfolio, including descriptive information (what evaluations, questions, designs, approaches, and methods are applied?) and questions of value (do these evaluations meet the needs of projects and their staff, and of NASA/NICE?). In the current climate, as federal funders of climate change and STEM education projects seek to better understand and incorporate evaluation into their decisions, evaluators and project leaders are also seeking to build robust understanding of program effectiveness. Meta-evaluations like this provide some baseline understanding of the current status quo and the kinds of evaluations carried out within such funding portfolios. These explorations are needed to understand the common ground between evaluative best practices, limited resources, and agencies' desires, capacity, and requirements. When NASA asks for evaluation of funded projects, what happens? Which questions are asked and answered, using which tools? To what extent do the evaluations meet the needs of projects and

The Phase Behavior Effect on the Reaction Engineering of Transesterification Reactions and Reactor Design for Continuous Biodiesel Production

Science.gov (United States)

Csernica, Stephen N.

The demand for renewable forms of energy has increased tremendously over the past two decades. Of all the different forms of renewable energy, biodiesel, a liquid fuel, has emerged as one of the more viable possibilities. This is in large part due to the fact that biodiesel can readily be used in modern day diesel engines with nearly no engine modifications. It is commonly blended with conventional petroleum-derived diesel but it can also be used neat. As a result of the continued growth of the industry, there has been a correspondingly large increase in the scientific and technical research conducted on the subject. Much of the research has been conducted on the feasibility of using different types of feedstocks, which generally vary with respect to geographic locale, as well as different types of catalysts. Much of the work of the present study was involved with the investigation of the binary liquid-liquid nature of the system and its effects on the reaction kinetics. Initially, the development of an analytical method for the analysis of the compounds present in transesterification reaction mixtures using high performance liquid chromatography (HPLC) was developed. The use of UV(205 nm) as well as refractive index detection (RID) were shown capable to detect the various different types of components associated with transesterification reactions. Reversed-phase chromatography with isocratic elution was primarily used. Using a unique experimental apparatus enabling the simultaneous analysis of both liquid phases throughout the reaction, an experimental method was developed for measuring the reaction rate under both mass transfer control and reaction control. The transesterification reaction rate under each controlling mechanism was subsequently evaluated and compared. It was determined that the reaction rate is directly proportional to the concentration of triglycerides in the methanol phase. Furthermore, the reaction rate accelerates rapidly as the system

Thermodynamic Vent System for an On-Orbit Cryogenic Reaction Control Engine

Science.gov (United States)

Hurlbert, Eric A.; Romig, Kris A.; Jimenez, Rafael; Flores, Sam

2012-01-01

A report discusses a cryogenic reaction control system (RCS) that integrates a Joule-Thompson (JT) device (expansion valve) and thermodynamic vent system (TVS) with a cryogenic distribution system to allow fine control of the propellant quality (subcooled liquid) during operation of the device. It enables zero-venting when coupled with an RCS engine. The proper attachment locations and sizing of the orifice are required with the propellant distribution line to facilitate line conditioning. During operations, system instrumentation was strategically installed along the distribution/TVS line assembly, and temperature control bands were identified. A sub-scale run tank, full-scale distribution line, open-loop TVS, and a combination of procured and custom-fabricated cryogenic components were used in the cryogenic RCS build-up. Simulated on-orbit activation and thruster firing profiles were performed to quantify system heat gain and evaluate the TVS s capability to maintain the required propellant conditions at the inlet to the engine valves. Test data determined that a small control valve, such as a piezoelectric, is optimal to provide continuously the required thermal control. The data obtained from testing has also assisted with the development of fluid and thermal models of an RCS to refine integrated cryogenic propulsion system designs. This system allows a liquid oxygenbased main propulsion and reaction control system for a spacecraft, which improves performance, safety, and cost over conventional hypergolic systems due to higher performance, use of nontoxic propellants, potential for integration with life support and power subsystems, and compatibility with in-situ produced propellants.

Hot-Fire Testing of 100 LB(sub F) LOX/LCH4 Reaction Control Engine at Altitude Conditions

Science.gov (United States)

Marshall, William M.; Kleinhenz, Julie E.

2010-01-01

Liquid oxygen/liquid methane (LO2/LCH4 ) has recently been viewed as a potential green propulsion system for both the Altair ascent main engine (AME) and reaction control system (RCS). The Propulsion and Cryogenic Advanced Development Project (PCAD) has been tasked by NASA to develop these green propellant systems to enable safe and cost effective exploration missions. However, experience with LO2/LCH4 as a propellant combination is limited, so testing of these systems is critical to demonstrating reliable ignition and performance. A test program of a 100 lb f reaction control engine (RCE) is underway at the Altitude Combustion Stand (ACS) of the NASA Glenn Research Center, with a focus on conducting tests at altitude conditions. These tests include a unique propellant conditioning feed system (PCFS) which allows for the inlet conditions of the propellant to be varied to test warm to subcooled liquid propellant temperatures. Engine performance, including thrust, c* and vacuum specific impulse (I(sub sp,vac)) will be presented as a function of propellant temperature conditions. In general, the engine performed as expected, with higher performance at warmer propellant temperatures but better efficiency at lower propellant temperatures. Mixture ratio effects were inconclusive within the uncertainty bands of data, but qualitatively showed higher performance at lower ratios.

Implementing core NICE guidelines for osteoarthritis in primary care with a model consultation (MOSAICS): a cluster randomised controlled trial.

Science.gov (United States)

Dziedzic, K S; Healey, E L; Porcheret, M; Afolabi, E K; Lewis, M; Morden, A; Jinks, C; McHugh, G A; Ryan, S; Finney, A; Main, C; Edwards, J J; Paskins, Z; Pushpa-Rajah, A; Hay, E M

2018-01-01

To determine the effectiveness of a model osteoarthritis consultation, compared with usual care, on physical function and uptake of National Institute for Health and Care Excellence (NICE) osteoarthritis recommendations, in adults ≥45 years consulting with peripheral joint pain in UK general practice. Two-arm cluster-randomised controlled trial with baseline health survey. Eight general practices in England. 525 adults ≥45 years consulting for peripheral joint pain, amongst 28,443 population survey recipients. Four intervention practices delivered the model osteoarthritis consultation to patients consulting with peripheral joint pain; four control practices continued usual care. The primary clinical outcome of the trial was the SF-12 physical component score (PCS) at 6 months; the main secondary outcome was uptake of NICE core recommendations by 6 months, measured by osteoarthritis quality indicators. A Linear Mixed Model was used to analyse clinical outcome data (SF-12 PCS). Differences in quality indicator outcomes were assessed using logistic regression. 525 eligible participants were enrolled (mean age 67.3 years, SD 10.5; 59.6% female): 288 from intervention and 237 from control practices. There were no statistically significant differences in SF-12 PCS: mean difference at the 6-month primary endpoint was -0.37 (95% CI -2.32, 1.57). Uptake of core NICE recommendations by 6 months was statistically significantly higher in the intervention arm compared with control: e.g., increased written exercise information, 20.5% (7.9, 28.3). Whilst uptake of core NICE recommendations was increased, there was no evidence of benefit of this intervention, as delivered in this pragmatic randomised trial, on the primary outcome of physical functioning at 6 months. ISRCTN06984617. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Non-Toxic Dual Thrust Reaction Control Engine Development for On-Orbit APS Applications

Science.gov (United States)

Robinson, Philip J.; Veith, Eric M.

2003-01-01

A non-toxic dual thrust proof-of-concept demonstration engine was successfully tested at the Aerojet Sacramento facility under a technology contract sponsored by the National Aeronautics and Space Administration's (NASA) Marshall Space Flight Center (MSFC). The goals of the NASA MSFC contract (NAS8-01109) were to develop and expand the technical maturity of a non-toxic, on-orbit auxiliary propulsion system (APS) thruster under the Next Generation Launch Technology (NGLT) program. The demonstration engine utilized the existing Kistler K-1 870 lbf LOX/Ethanol orbital maneuvering engine ( O m ) coupled with some special test equipment (STE) that enabled engine operation at 870 lbf in the primary mode and 25 lbf in the vernier mode. Ambient testing in primary mode varied mixture ratio (MR) from 1.28 to 1.71 and chamber pressure (P(c) from 110 to 181 psia, and evaluated electrical pulse widths (EPW) of 0.080, 0.100 and 0.250 seconds. Altitude testing in vernier mode explored igniter and thruster pulsing characteristics, long duration steady state operation (greater than 420 sec) and the impact of varying the percent fuel film cooling on vernier performance and chamber thermal response at low PC (4 psia). Data produced from the testing provided calibration of the performance and thermal models used in the design of the next version of the dual thrust Reaction Control Engine (RCE).

Combustion engineering

CERN Document Server

Ragland, Kenneth W

2011-01-01

Introduction to Combustion Engineering The Nature of Combustion Combustion Emissions Global Climate Change Sustainability World Energy Production Structure of the Book   Section I: Basic Concepts Fuels Gaseous Fuels Liquid Fuels Solid Fuels Problems Thermodynamics of Combustion Review of First Law Concepts Properties of Mixtures Combustion StoichiometryChemical EnergyChemical EquilibriumAdiabatic Flame TemperatureChemical Kinetics of CombustionElementary ReactionsChain ReactionsGlobal ReactionsNitric Oxide KineticsReactions at a Solid SurfaceProblemsReferences  Section II: Combustion of Gaseous and Vaporized FuelsFlamesLaminar Premixed FlamesLaminar Flame TheoryTurbulent Premixed FlamesExplosion LimitsDiffusion FlamesGas-Fired Furnaces and BoilersEnergy Balance and EfficiencyFuel SubstitutionResidential Gas BurnersIndustrial Gas BurnersUtility Gas BurnersLow Swirl Gas BurnersPremixed-Charge Engine CombustionIntroduction to the Spark Ignition EngineEngine EfficiencyOne-Zone Model of Combustion in a Piston-...

The U.K. NICE 2014 Guidelines for Osteoarthritis of the Knee: Lessons Learned in a Narrative Review Addressing Inadvertent Limitations and Bias.

Science.gov (United States)

Birch, Stephen; Lee, Myeong Soo; Robinson, Nicola; Alraek, Terje

2017-04-01

Several systematic reviews suggest that acupuncture is effective for knee osteoarthritis (OA), and furthermore a safe and cost-effective treatment for this condition. A recent clinical practice guideline (CPG) from the National Institute for Health and Care Excellence (NICE), in the United Kingdom, recommended against the use of acupuncture on the grounds that the effect size (ES) in comparison with sham acupuncture is too small. Safety data were not considered in the review, in addition the levels of evidence for acupuncture against other recommended therapies were not compared. Consequently, it is argued that this NICE guideline has limitations that lead to several potential biases in its evaluation of acupuncture, which were not addressed correctly: (1) NICE's prior scoping process limited its review. (2) NICE introduced the method of developing recommendations based on the consideration of which interventions make "minimal important differences" of an ES of 0.5 or greater, rather than the statistical significance of the effect of an intervention when compared with an appropriate comparison. (3) Evidence that sham acupuncture is not physiologically inert and has some level of beneficial effect, hence artificially reducing the magnitude of the ES in comparison with sham. (4) The low adverse effects profile of acupuncture. (5) Evidence from trials comparing acupuncture with usual or standard care was not considered, nor was cost-effectiveness data. (6) Lack of the usual CPG "head-to-head" comparisons between interventions. If the same criteria and methods that have been applied to acupuncture were applied to other NICE-recommended therapies for knee OA, including patient centeredness, patient education, self-management and weight loss, nonsteroidal anti-inflammatory drug (NSAIDs), and cyclooxygenase-2 inhibitor (COX-2 inhibitors), these too would no longer be recommended and opiates would become the first line of drug prescription. Given the problems with sham

Analysis of kinetic reaction mechanisms

CERN Document Server

Turányi, Tamás

2014-01-01

Chemical processes in many fields of science and technology, including combustion, atmospheric chemistry, environmental modelling, process engineering, and systems biology, can be described by detailed reaction mechanisms consisting of numerous reaction steps. This book describes methods for the analysis of reaction mechanisms that are applicable in all these fields. Topics addressed include: how sensitivity and uncertainty analyses allow the calculation of the overall uncertainty of simulation results and the identification of the most important input parameters, the ways in which mechanisms can be reduced without losing important kinetic and dynamic detail, and the application of reduced models for more accurate engineering optimizations. This monograph is invaluable for researchers and engineers dealing with detailed reaction mechanisms, but is also useful for graduate students of related courses in chemistry, mechanical engineering, energy and environmental science and biology.

IZBOLJŠANJE MANAGEMENTSKEGA VODENJA V JAVNEM ZAVODU SPLOŠNE BOLNIŠNICE MURSKA SOBOTA

OpenAIRE

Maček, Ines

2015-01-01

Za magistrsko nalogo z naslovom Izboljšanje managementskega vodenja v javnem zavodu Splošne bolnišnice Murska Sobota smo se odločili, ker menimo, da uspešnost javnega zavoda ni odvisna samo od spretnega vodstva, ampak predvsem od dobrega sodelovanja in komuniciranja na različnih organizacijskih ravneh javnega zavoda. Zaposleni v javnem zavodu morajo nenehno sodelovati in komunicirati med seboj in tudi s svojimi nadrejenimi, le-ti pa morajo tesno sodelovati z vodstvom. Javni zavod brez komu...

Finding of no significant impact for the joint DOE/EPA program on national industrial competitiveness through energy efficiency and economics (NICE{sup 3})

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The Department of Energy (DOE) has prepared a Programmatic Environmental Assessment (PEA), to assess the environment impacts associated with a joint DOE/EPA cost-sharing grant program named National Industrial Competitiveness through Energy Efficiency, Environment and Economics (NICE{sup 3}). The purpose of the NICE{sup 3} Program is to encourage waste minimization technology in industry by funding projects that develop activities and process improvements to conserve energy and reduce pollution. The proposed action would provide Federal financial assistance in the form of grants to industry in order to promote pollution prevention, energy efficiency, and cost competitiveness. Based on the analysis presented in the PEA, DOE has determined that the proposed action (providing NICE{sup 3} grants for projects which are consistent with the goals of the PPA and EPACT) does not constitute a major Federal action significantly affecting the quality of the human environment within the meaning of NEPA. Therefore, the preparation of an Environmental Impact Statement is not needed and the Department is issuing this Finding of No Significant Impact.

Do children go for the nice guys? The influence of speaker benevolence and certainty on selective word learning.

Science.gov (United States)

Bergstra, Myrthe; DE Mulder, Hannah N M; Coopmans, Peter

2018-04-06

This study investigated how speaker certainty (a rational cue) and speaker benevolence (an emotional cue) influence children's willingness to learn words in a selective learning paradigm. In two experiments four- to six-year-olds learnt novel labels from two speakers and, after a week, their memory for these labels was reassessed. Results demonstrated that children retained the label-object pairings for at least a week. Furthermore, children preferred to learn from certain over uncertain speakers, but they had no significant preference for nice over nasty speakers. When the cues were combined, children followed certain speakers, even if they were nasty. However, children did prefer to learn from nice and certain speakers over nasty and certain speakers. These results suggest that rational cues regarding a speaker's linguistic competence trump emotional cues regarding a speaker's affective status in word learning. However, emotional cues were found to have a subtle influence on this process.

NICE guideline on antibiotic prophylaxis against infective endocarditis: attitudes to the guideline and implications for dental practice in Ireland.

LENUS (Irish Health Repository)

2009-03-28

To investigate attitudes of Irish dental practitioners, cardiologists and patients with cardiac lesions to the new NICE guideline for antibiotic prophylaxis against infective endocarditis and to determine the implications of this guideline for dental practice in Ireland.

Nice Guys Finish Last: Are People with Higher Tax Morale Taxed more Heavily?

OpenAIRE

Philipp Doerrenberg; Denvil Duncan; Clemens Fuest; Andreas Peichl

2012-01-01

This paper is the first to provide evidence of efficient taxation of groups with heterogeneous levels of 'tax morale'. We set up an optimal income tax model where high tax morale implies a high subjective cost of evading taxes. The model predicts that 'nice guys finish last': groups with higher tax morale will be taxed more heavily, simply because taxing them is less costly. Based on unique cross-country micro data and an IV approach to rule out reverse causality, we find empirical support fo...

NICeSim: an open-source simulator based on machine learning techniques to support medical research on prenatal and perinatal care decision making.

Science.gov (United States)

Cerqueira, Fabio Ribeiro; Ferreira, Tiago Geraldo; de Paiva Oliveira, Alcione; Augusto, Douglas Adriano; Krempser, Eduardo; Corrêa Barbosa, Helio José; do Carmo Castro Franceschini, Sylvia; de Freitas, Brunnella Alcantara Chagas; Gomes, Andreia Patricia; Siqueira-Batista, Rodrigo

2014-11-01

This paper describes NICeSim, an open-source simulator that uses machine learning (ML) techniques to aid health professionals to better understand the treatment and prognosis of premature newborns. The application was developed and tested using data collected in a Brazilian hospital. The available data were used to feed an ML pipeline that was designed to create a simulator capable of predicting the outcome (death probability) for newborns admitted to neonatal intensive care units. However, unlike previous scoring systems, our computational tool is not intended to be used at the patients bedside, although it is possible. Our primary goal is to deliver a computational system to aid medical research in understanding the correlation of key variables with the studied outcome so that new standards can be established for future clinical decisions. In the implemented simulation environment, the values of key attributes can be changed using a user-friendly interface, where the impact of each change on the outcome is immediately reported, allowing a quantitative analysis, in addition to a qualitative investigation, and delivering a totally interactive computational tool that facilitates hypothesis construction and testing. Our statistical experiments showed that the resulting model for death prediction could achieve an accuracy of 86.7% and an area under the receiver operating characteristic curve of 0.84 for the positive class. Using this model, three physicians and a neonatal nutritionist performed simulations with key variables correlated with chance of death. The results indicated important tendencies for the effect of each variable and the combination of variables on prognosis. We could also observe values of gestational age and birth weight for which a low Apgar score and the occurrence of respiratory distress syndrome (RDS) could be less or more severe. For instance, we have noticed that for a newborn with 2000 g or more the occurrence of RDS is far less problematic

Study of reaction between water and exhaust gases from diesel engines used in underground mining

Energy Technology Data Exchange (ETDEWEB)

Mazukhina, S.I.; Kalabin, G.V.; Romanov, V.S.

1988-05-01

A method of mathematical simulation, based on the principle of local equilibrium of the kinetic components, was proposed for formulating and solving problems related to the combustion of fuel and the treatment of exhaust gases from a diesel engine in underground workings. Results of a study of the effects of exhaust gas quantity and composition on the reaction between the gases and water are presented. It is shown that the kinetic model correlates well with the equilibrium model, adequately describes the process, and gives a reliable picture of the changes over a period of time. The proposed method can be used to study the gas emission with different fuel mixtures and liquid neutralizing agents with a view to reducing the toxicity of diesel-engine exhaust gases.

A Multifactorial Intervention Based on the NICE-Adjusted Guideline in the Prevention of Delirium in Patients Hospitalized for Cardiac Surgery

Directory of Open Access Journals (Sweden)

Mohammad Ali Cheraghi

2017-05-01

Full Text Available Delirium is the most common problem in patients in intensive care units. Prevention of delirium is more important than treatment. The aim of this study is to determine the effect of the NICE-adjusted multifactorial intervention to prevent delirium in open heart surgery patients. Methods: This study is a quasi-experimental study on 88 patients (In each group, 44 patients undergoing open heart surgery in the intensive care unit of Imam Khomeini Hospital, Tehran. Subjects received usual care group, only the incidence of delirium were studied. So that patients in the two groups of second to fifth postoperative day, twice a day by the researcher, and CAM-ICU questionnaire were followed. After completion of the sampling in this group, in the intervention group also examined incidence of delirium was conducted in the same manner except that multifactorial interventions based on the intervention of NICE modified by the researcher on the second day to fifth implementation and intervention on each turn, their implementation was followed. As well as to check the quality of sleep and pain in the intervention group of CPOT and Pittsburgh Sleep assessment tools were used. Data analysis was done using the SPSS software, version 16. A T-test, a chi-square test, and a Fisher’s exact test were also carried out. Results: The incidence of delirium in the control group was 42.5%; and in the intervention group, it was 22.5%. The result showed the incidence of delirium in open heart surgery hospitalized patients after multifactorial intervention based on adjusted NICE guidelines has been significantly reduced. Conclusion: The NICE-adjusted multifactorial intervention guidelines for the prevention of delirium in cardiac surgery patients significantly reduced the incidence of delirium in these patients. So, using this method as an alternative comprehensive and reliable in preventing delirium in hospitalized patients in the ward heart surgery is recommended.

No Ifs, No Butts: Compliance with Smoking Cessation in Secondary Care Guidance (NICE PH48 by Providers of Cancer Therapies (Radiotherapy and Chemotherapy in the UK

Directory of Open Access Journals (Sweden)

Daniel Hutton

2016-12-01

Full Text Available Background: Legislation preventing smoking in public places was introduced in England in July 2007. Since then, smoke-free policies have been extended to the majority of hospitals including those providing cancer therapies. Whilst studies have been conducted on the impact and effectiveness of hospital smoke-free policy in the UK and other countries, there have not been any studies with a focus on cancer care providers. Cancer patients are a priority group for smoking cessation and support and this study aimed to examine implementation of the National Institute Clinical Excellence (NICE guidance (PH48 in acute cancer care trusts in the UK. Methods: Participants were recruited from UK radiotherapy and chemotherapy departments (total 80 sites, 65 organisations and asked to complete a 15 min online questionnaire exploring the implementation of NICE guidance at their hospital site. Results: Considerable variability in implementation of the NICE guidance was observed. A total of 79.1% trusts were smoke-free in theory; however, only 18.6% were described as smoke-free in practice. Areas of improvement were identified in information and support for patients and staff including in Nicotine Replacement Therapy (NRT provision, staff training and clarity on e-cigarette policies. Conclusions: While some trusts have effective smoke-free policies and provide valuable cessation support services for patients, improvements are required to ensure that all sites fully adopt the NICE guidance.

The international emergency management and engineering conference 1995: Proceedings. Globalization of emergency management and engineering: National and international issues concerning research and applications

Energy Technology Data Exchange (ETDEWEB)

Sullivan, J.D. [ed.] [Optimal Systems, Inc., Dallas, TX (United States); Wybo, J.L. [ed.] [Ecole des Mines de Paris (France); Buisson, L. [ed.] [CEMAGREF, Saint-Martin d`Heres (France). Div. Nivologie

1995-12-31

This conference was held May 9--12, 1995 in Nice, France. The purpose of this conference was to provide a forum for exchange of state-of-the-art information to cope more effectively with emergencies. Attention is focused on advance technology from both a managerial and a scientific viewpoint. Interests include computers and communication systems as well as the social science and management aspects involved in emergency management and engineering. The major sections are: Management and Social Sciences; Training; Natural Disasters; Nuclear Hazards; Chemical Hazards; Research; and Applications. Individual papers have been processed separately for inclusion in the appropriate data bases.

2-Diazo-1-phenyl-2-((trifluoromethyl)sulfonyl)ethan-1-one: Another Utility for Electrophilic Trifluoromethylthiolation Reactions.

Science.gov (United States)

Huang, Zhongyan; Okuyama, Kenta; Wang, Chen; Tokunaga, Etsuko; Li, Xiaorui; Shibata, Norio

2016-06-01

2-Diazo-1-phenyl-2-((trifluoromethyl)sulfonyl)ethan-1-one (diazo-triflone) ( 2 ) is not only a building block but also a reagent. In this study, diazo-triflone, which was originally used for the synthesis of β-lactam triflones as a trifluoromethanesulfonyl (SO 2 CF 3 ) building block under catalyst-free thermal conditions, is redisclosed as an effective electrophilic trifluoromethylthiolation reagent under copper catalysis. A broad set of enamines, indoles, β-keto esters, pyrroles, and anilines were nicely transformed into corresponding trifluoromethylthio (SCF 3 ) compounds in good to high yields by diazo-triflone under copper catalysis via an electrophilic-type reaction. A coupling-type trifluoromethylthiolation reaction of aryl iodides was also realized by diazo-triflone in acceptable yields.

Expanding the scope of cyclopropene reporters for the detection of metabolically engineered glycoproteins by Diels–Alder reactions

Directory of Open Access Journals (Sweden)

Anne-Katrin Späte

2014-09-01

Full Text Available Monitoring glycoconjugates has been tremendously facilitated by the development of metabolic oligosaccharide engineering. Recently, the inverse-electron-demand Diels–Alder reaction between methylcyclopropene tags and tetrazines has become a popular ligation reaction due to the small size and high reactivity of cyclopropene tags. Attaching the cyclopropene tag to mannosamine via a carbamate linkage has made the reaction even more efficient. Here, we expand the application of cyclopropene tags to N-acylgalactosamine and N-acylglucosamine derivatives enabling the visualization of mucin-type O-glycoproteins and O-GlcNAcylated proteins through Diels–Alder chemistry. Whereas the previously reported cyclopropene-labeled N-acylmannosamine derivative leads to significantly higher fluorescence staining of cell-surface glycoconjugates, the glucosamine derivative gave higher labeling efficiency with protein preparations containing also intracellular proteins.

EARLY DYNAMICAL EVOLUTION OF THE SOLAR SYSTEM: PINNING DOWN THE INITIAL CONDITIONS OF THE NICE MODEL

International Nuclear Information System (INIS)

Batygin, Konstantin; Brown, Michael E.

2010-01-01

In the recent years, the 'Nice' model of solar system formation has attained an unprecedented level of success in reproducing much of the observed orbital architecture of the solar system by evolving the planets to their current locations from a more compact configuration. Within the context of this model, the formation of the classical Kuiper Belt requires a phase during which the ice giants have a high eccentricity. An outstanding question of this model is the initial configuration from which the solar system started out. Recent work has shown that multi-resonant initial conditions can serve as good candidates, as they naturally prevent vigorous type-II migration. In this paper, we use analytical arguments, as well as self-consistent numerical N-body simulations to identify fully resonant initial conditions, whose dynamical evolution is characterized by an eccentric phase of the ice giants, as well as planetary scattering. We find a total of eight such initial conditions. Four of these primordial states are compatible with the canonical 'Nice' model, while the others imply slightly different evolutions. The results presented here should prove useful in further development of a comprehensive model for solar system formation.

Programming chemical kinetics: engineering dynamic reaction networks with DNA strand displacement

Science.gov (United States)

Srinivas, Niranjan

Over the last century, the silicon revolution has enabled us to build faster, smaller and more sophisticated computers. Today, these computers control phones, cars, satellites, assembly lines, and other electromechanical devices. Just as electrical wiring controls electromechanical devices, living organisms employ "chemical wiring" to make decisions about their environment and control physical processes. Currently, the big difference between these two substrates is that while we have the abstractions, design principles, verification and fabrication techniques in place for programming with silicon, we have no comparable understanding or expertise for programming chemistry. In this thesis we take a small step towards the goal of learning how to systematically engineer prescribed non-equilibrium dynamical behaviors in chemical systems. We use the formalism of chemical reaction networks (CRNs), combined with mass-action kinetics, as our programming language for specifying dynamical behaviors. Leveraging the tools of nucleic acid nanotechnology (introduced in Chapter 1), we employ synthetic DNA molecules as our molecular architecture and toehold-mediated DNA strand displacement as our reaction primitive. Abstraction, modular design and systematic fabrication can work only with well-understood and quantitatively characterized tools. Therefore, we embark on a detailed study of the "device physics" of DNA strand displacement (Chapter 2). We present a unified view of strand displacement biophysics and kinetics by studying the process at multiple levels of detail, using an intuitive model of a random walk on a 1-dimensional energy landscape, a secondary structure kinetics model with single base-pair steps, and a coarse-grained molecular model that incorporates three-dimensional geometric and steric effects. Further, we experimentally investigate the thermodynamics of three-way branch migration. Our findings are consistent with previously measured or inferred rates for

Bivalirudin for the treatment of ST-segment elevation myocardial infarction: a NICE single technology appraisal.

Science.gov (United States)

Simpson, E L; Fitzgerald, P; Evans, P; Tappenden, P; Kalita, N; Reckless, J P D; Bakhai, A

2013-04-01

The National Institute for Health and Clinical Excellence (NICE) invited the manufacturer (The Medicines Company) of bivalirudin to submit evidence for its clinical and cost effectiveness within its licensed indication for the treatment of adults with ST-segment elevation myocardial infarction (STEMI) intended for primary percutaneous coronary intervention (PPCI), as part of NICE's single technology appraisal (STA) process. The School of Health and Related Research (ScHARR) at the University of Sheffield was commissioned to act as the Evidence Review Group (ERG), which produced a review of the evidence within the manufacturer's submission to NICE. This article describes the manufacturer's submission, the ERG review and NICE's subsequent decisions. The main evidence was derived from one randomized controlled trial (RCT) of STEMI patients intended for PPCI, comparing bivalirudin with unfractionated heparin plus glycoprotein IIb/IIIa inhibitors (GPIs). Bivalirudin was associated with a significant reduction in cardiac mortality at 30 days (p = 0.03) and at 1-year follow-up (p = 0.005), and a significant reduction in major bleeding at 30 days (p plus GPI. Stent thrombosis up to 24 hours following PPCI was significantly (p target vessel for ischaemia (p = 0.18 and p = 0.12, respectively). There were two decision-analytic models: the base-case scenario used 1-year follow-up data from the RCT; and a sensitivity analysis used 3-year follow-up data. Resource use was primarily drawn from this RCT. Health-related quality-of-life (HR-QOL) estimates were drawn from a UK cohort study. Both models evaluated the incremental costs and outcomes of bivalirudin compared with heparin plus GPI for patients with STEMI intended for PPCI. The analysis adopted a UK NHS perspective over a lifetime horizon. Unit costs were based on year 2009-2010 prices. The model adopted a decision-tree structure to reflect initial events for the initial period (stroke, repeat MI, minor

RxnFinder: biochemical reaction search engines using molecular structures, molecular fragments and reaction similarity.

Science.gov (United States)

Hu, Qian-Nan; Deng, Zhe; Hu, Huanan; Cao, Dong-Sheng; Liang, Yi-Zeng

2011-09-01

Biochemical reactions play a key role to help sustain life and allow cells to grow. RxnFinder was developed to search biochemical reactions from KEGG reaction database using three search criteria: molecular structures, molecular fragments and reaction similarity. RxnFinder is helpful to get reference reactions for biosynthesis and xenobiotics metabolism. RxnFinder is freely available via: http://sdd.whu.edu.cn/rxnfinder. qnhu@whu.edu.cn.

Maillard Reaction: review

Directory of Open Access Journals (Sweden)

Júlia d'Almeida Francisquini

2017-11-01

Full Text Available Maillard reaction is an important subject of study in food science and technology and different areas of knowledge are involved such as chemistry, food engineering, nutrition and food technology. The objective of this paper is to present the basic concepts of the Maillard reaction, such as the reaction stages, the main compounds producced and some technological consequences for dairy products.

Profession. Gas triumph celebrated in Nice. Globalization at all levels; Profession. Le triomphe du gaz celebre a Nice. Globalisation a tous les etages

Energy Technology Data Exchange (ETDEWEB)

Robert, J.

2000-08-01

These columns comprise two articles. The first article presents a status of the conclusions of the 21. world gas congress held in Nice (France) in June 6-9, 2000. Natural gas has been promoted 'energy of the 21. century' and presented as a vector of economic development and environment protection. The deregulation of markets, the new forms of competition and partnership and the new technologies were in the center of debates and presentations. The second article concerns the 16. world oil congress, held in Calgary (Canada) in June 2000. Durable economic development, environment and Internet were the three main topics of the congress. In front of the globalization of economies and the development of Internet, oil companies need to change their working procedures which will lead to the acceptance of the durable development concept. The objective is to take into consideration the environment and the social dimension in any new project. (J.S.)

Discovery of gigantic molecular nanostructures using a flow reaction array as a search engine.

Science.gov (United States)

Zang, Hong-Ying; de la Oliva, Andreu Ruiz; Miras, Haralampos N; Long, De-Liang; McBurney, Roy T; Cronin, Leroy

2014-04-28

The discovery of gigantic molecular nanostructures like coordination and polyoxometalate clusters is extremely time-consuming since a vast combinatorial space needs to be searched, and even a systematic and exhaustive exploration of the available synthetic parameters relies on a great deal of serendipity. Here we present a synthetic methodology that combines a flow reaction array and algorithmic control to give a chemical 'real-space' search engine leading to the discovery and isolation of a range of new molecular nanoclusters based on [Mo(2)O(2)S(2)](2+)-based building blocks with either fourfold (C4) or fivefold (C5) symmetry templates and linkers. This engine leads us to isolate six new nanoscale cluster compounds: 1, {Mo(10)(C5)}; 2, {Mo(14)(C4)4(C5)2}; 3, {Mo(60)(C4)10}; 4, {Mo(48)(C4)6}; 5, {Mo(34)(C4)4}; 6, {Mo(18)(C4)9}; in only 200 automated experiments from a parameter space spanning ~5 million possible combinations.

The international symposium on 'chemical engineering of gas-liquid-solid catalyst reactions'

Energy Technology Data Exchange (ETDEWEB)

Hammer, H

1978-06-01

A report on the International Symposium on ''Chemical Engineering of Gas-Liquid-Solid Catalyst Reactions'', sponsored by the University of Liege (3/2-3/78), covers papers on the hydrodynamics, modeling and simulation, operating behavior, and chemical kinetics of trickle-bed reactors; scale-up of a trickle-bed reactor for hydrotreating Kuwait vacuum distillate; experimental results obtained in trickle-bed reactors for hydroprocessing atmospheric residua, hydrogenation of methylstyrene, hydrogenation of butanone, and hydrodemetallization of petroleum residua; advantages and disadvantages of various three-phase reactor types (e.g., for the liquid-phase hydrogenation of carbon monoxide to benzene, SNG, or methanol) and hydrodynamics, mass and heat transfer, and modeling of bubble columns with suspended catalysts (slurry reactors), and their applications (e.g., in SNG and fermentation processes).

Atomic reactor thermal engineering

International Nuclear Information System (INIS)

Kim, Gwang Ryong

1983-02-01

This book starts the introduction of atomic reactor thermal engineering including atomic reaction, chemical reaction, nuclear reaction neutron energy and soon. It explains heat transfer, heat production in the atomic reactor, heat transfer of fuel element in atomic reactor, heat transfer and flow of cooler, thermal design of atomic reactor, design of thermodynamics of atomic reactor and various. This deals with the basic knowledge of thermal engineering for atomic reactor.

Host-Guest Engineering of Layered Double Hydroxides towards Efficient Oxygen Evolution Reaction: Recent Advances and Perspectives

Directory of Open Access Journals (Sweden)

Jianming Li

2018-05-01

Full Text Available Electrochemical water splitting has great potential in the storage of intermittent energy from the sun, wind, or other renewable sources for sustainable clean energy applications. However, the anodic oxygen evolution reaction (OER usually determines the efficiency of practical water electrolysis due to its sluggish four-electron process. Layered double hydroxides (LDHs have attracted increasing attention as one of the ideal and promising electrocatalysts for water oxidation due to their excellent activity, high stability in basic conditions, as well as their earth-abundant compositions. In this review, we discuss the recent progress on LDH-based OER electrocatalysts in terms of active sites, host-guest engineering, and catalytic performances. Moreover, further developments and challenges in developing promising electrocatalysts based on LDHs are discussed from the viewpoint of molecular design and engineering.

Global Controllability of Chemical Reactions

OpenAIRE

Drexler, Dániel András; Tóth, János

2015-01-01

Controllability of chemical reactions is an important problem in chemical engineering science. In control theory, analysis of the controllability of linear systems is well-founded, however the dynamics of chemical reactions is usually nonlinear. Global controllability properties of chemical reactions are analyzed here based on the Lie-algebra of the vector fields associated to elementary reactions. A chemical reaction is controllable almost everywhere if all the reaction rate coefficients can...

Test Results for a Non-toxic, Dual Thrust Reaction Control Engine

Science.gov (United States)

Robinson, Philip J.; Veith, Eric M.; Turpin, Alicia A.

2005-01-01

A non-toxic, dual thrust reaction control engine (RCE) was successfully tested over a broad range of operating conditions at the Aerojet Sacramento facility. The RCE utilized LOX/Ethanol propellants; and was tested in steady state and pulsing modes at 25-lbf thrust (vernier) and at 870-lbf thrust (primary). Steady state vernier tests vaned chamber pressure (Pc) from 0.78 to 5.96 psia, and mixture ratio (MR) from 0.73 to 1.82, while primary steady state tests vaned Pc from 103 to 179 psia and MR from 1.33 to 1.76. Pulsing tests explored EPW from 0.080 to 10 seconds and DC from 5 to 50 percent at both thrust levels. Vernier testing accumulated a total of 6,670 seconds of firing time, and 7,215 pulses, and primary testing accumulated a total of 2,060 seconds of firing time and 3,646 pulses.

Audit of Helicobacter pylori Testing in Microbiology Laboratories in England: To Inform Compliance with NICE Guidance and the Feasibility of Routine Antimicrobial Resistance Surveillance

Directory of Open Access Journals (Sweden)

Rosalie Allison

2016-01-01

Full Text Available Introduction. The National Institute for Health and Clinical Excellence (NICE guidance recommends that dyspeptic patients are tested for Helicobacter pylori using a urea breath test, stool antigen test, or serology. Antibiotic resistance in H. pylori is globally increasing, but treatment in England is rarely guided by susceptibility testing or surveillance. Aims. To determine compliance of microbiology laboratories in England with NICE guidance and whether laboratories perform culture and antibiotic susceptibility testing (AST. Methods. In 2015, 170 accredited English microbiology laboratories were surveyed, by email. Results. 121/170 (71% laboratories responded; 96% provided H. pylori testing (78% on site. 94% provided H. pylori diagnosis using stool antigen; only four provided serology as their noninvasive test; 3/4 of these encouraged urea breath tests in their acute trusts. Only 22/94 (23% of the laboratories performed H. pylori cultures from gastric biopsies on site; 9/22 performed AST, but the vast majority processed less than one specimen/week. Conclusions. Only five laboratories in England do not comply with NICE guidance; these will need the guidance reinforced. National surveillance needs to be implemented; culture-based AST would need to be centralised. Moving forward, detection of resistance in H. pylori from stool specimens using molecular methods (PCR needs to be explored.

The National Institute for Health and Clinical Excellence (NICE) guidelines for early detection of ovarian cancer: the pivotal role of the clinical laboratory.

Science.gov (United States)

Sturgeon, Catharine M; Duffy, Michael J; Walker, Graeme

2011-07-01

The National Institute for Health and Clinical Excellence (NICE) has recently reviewed optimal means of early recognition and initial management of ovarian cancer, the leading cause of gynaecological death in the UK. The NICE guidelines state that general practitioners should measure serum CA125 in women presenting with persistent and continuous symptoms suggestive of ovarian cancer (e.g. abdominal distension, early satiety and loss of appetite or pelvic pain). If CA125 is ≥35 kU/L, the general practitioner should arrange an ultrasound scan of the abdomen and pelvis to enable calculation of the risk of malignancy score (RMI). Women with an RMI score of ≥250 should then be referred to a specialist multidisciplinary team. Successful implementation of these guidelines requires close liaison between primary care and laboratory medicine to ensure that CA125 is requested as a diagnostic aid only for women meeting the criteria stated in the guidelines. Preanalytical criteria must also be met and it is essential that both requestors and patients be aware of other possible causes of increases in CA125, as well as the fact that it is not raised in all patients with ovarian cancer. Guidance is being prepared to enable appropriate interpretation and implementation of the NICE guidelines. Continuous audit of the outcomes will also be essential to determine the effectiveness of this approach to early detection of ovarian cancer.

Application of Enzyme Coupling Reactions to Shift Thermodynamically Limited Biocatalytic Reactions

DEFF Research Database (Denmark)

Abu, Rohana; Woodley, John M.

2015-01-01

, it can be challenging to combine several engineered enzymes in vitro for the conversion of non-natural substrates. In this mini-review we focus on enzyme coupling reactions as a tool to alleviate thermodynamic constraints in synthetically useful biocatalytic reactions. The implications of thermodynamic...... shift the equilibrium of otherwise thermodynamically unfavourable reactions to give a higher conversion of the target product. By coupling an energetically unfavourable reaction with a more favourable one, the multi-enzyme cascade mimics the approach taken in nature in metabolic pathways. Nevertheless...

How did the ball of rock we live on get so nice?

Science.gov (United States)

Armstrong, K.

2017-12-01

We want to understand how the big ball of rock, water, and air we live on got to be as nice as it is. Some of the things that made our world so nice are what it's made of, and what happened to those things after they were all put together. When our home ball of rock was little, it got bigger by grabbing some of the other stuff that was close by in space. So our world is made of all that space stuff, which was rocks, and that stuff that turns red if you let it get wet. Most of that red stuff is deep down in the middle of the world, covered up by a lot of rocks. But there is a lot of it inside the rocks, too. That red stuff does a lot of cool stuff when it touches other things, especially the kind of air we like to breathe- that is what makes it turn red. Just one very tiny piece of the red stuff can join up with the breathing air in different ways: it can team up with none at all, or a little bit, or a lot, or even more. If we look at how much of the breathing air is teamed up with the red stuff inside the rocks, we can learn about how the rocks got there and what happened to them a long time ago. In the rocks that we can look at, there is more of the breathing air teamed up with the red stuff than we might have thought. We think that maybe that is because when more and more stuff tries to fit in the same small space, and gets pressed down, like it does deep down in our world, it can change in ways we do not expect. When our world was almost as big as it is now, it probably grabbed some space stuff that was almost as big as it was. The space stuff would have run into our world really hard, and that would have made everything really hot, hot enough to make all the rocks in the world move like water. We have an idea that maybe, when all the rocks on the world were really hot and moved around like water, deep down the red stuff and the breathing air might have got all pressed together very hard, so that more of the breathing air would team up with the red stuff than it

Summary of Altitude Pulse Testing of a 100-lbf L02/LCH4 Reaction Control Engine

Science.gov (United States)

Marshall, William M.; Kleinhenz, Julie E.

2011-01-01

Recently, liquid oxygen-liquid methane (LO2/LCH4) has been considered as a potential "green" propellant alternative for future exploration missions. The Propulsion and Cryogenic Advanced Development (PCAD) project has been tasked by NASA to develop this propulsion combination to enable safe and cost effective exploration missions. To date, limited experience with such combinations exist, and as a result a comprehensive test program is critical to demonstrating the viability of implementing such a system. The NASA Glenn Research Center has conducted a test program of a 100-lbf (445-N) reaction control engine (RCE) at the center s Altitude Combustion Stand (ACS), focusing on altitude testing over a wide variety of operational conditions. The ACS facility includes a unique propellant conditioning feed system (PCFS) which allows precise control of propellant inlet conditions to the engine. Engine performance as a result of these inlet conditions was examined extensively during the test program. This paper is a companion to the previous specific impulse testing paper, and discusses the pulsed mode operation portion of testing, with a focus on minimum impulse bit (I-bit) and repeatable pulse performance. The engine successfully demonstrated target minimum impulse bit performance at all conditions, as well as successful demonstration of repeatable pulse widths. Some anomalous conditions experienced during testing are also discussed, including a double pulse phenomenon which was not noted in previous test programs for this engine.

Twin defects engineered Pd cocatalyst on C3N4 nanosheets for enhanced photocatalytic performance in CO2 reduction reaction

Science.gov (United States)

Lang, Qingqing; Hu, Wenli; Zhou, Penghui; Huang, Tianlong; Zhong, Shuxian; Yang, Lining; Chen, Jianrong; Bai, Song

2017-12-01

Photocatalytic conversion of CO2 to value-added chemicals, a potential route to addressing the depletion of fossil fuels and anthropogenic climate change, is greatly limited by the low-efficient semiconductor photocatalyst. The integration of cocatalyst with light-harvesting semiconductor is a promising approach to enhancing the photocatalytic performance in CO2 reduction reaction. The enhancement is greatly determined by the catalytic active sites on the surface of cocatalyst. Herein, we demonstrate that the photocatalytic performance in the CO2 reduction reaction is greatly promoted by twin defects engineered Pd cocatalyst. In this work, Pd nanoicosahedrons with twin defects were in situ grown on C3N4 nanosheets, which effectively improve the photocatalytic performance in reduction of CO2 to CO and CH4 in comparison with Pd nanotetrahedrons without twin defects. It is proposed that the twin boundary (TB) terminations on the surface of Pd cocatalysts are highly catalytic active sites for CO2 reduction reaction. Based on the proposed mechanism, the photocatalytic activity and selectivity in CO2 reduction were further advanced through reducing the size of Pd icosahedral cocatalyst resulted from the increased surface density of TB terminations. The defect engineering on the surface of cocatalyst represents a novel route in realizing high-performance photocatalytic applications.

The Role of Nice and Nasty Theory of Mind in Teacher-Selected Peer Models for Adolescents with Autism Spectrum Disorders

Science.gov (United States)

Laghi, Fiorenzo; Lonigro, Antonia; Levanto, Simona; Ferraro, Maurizio; Baumgartner, Emma; Baiocco, Roberto

2016-01-01

The study aimed at verifying if nice and nasty theory of mind behaviors, in association with teachers' peer buddy nomination, could be used to correctly select peer models for adolescents with autism spectrum disorder. Mentalizing abilities and emotional and behavioral characteristics of 601 adolescents were assessed. Results suggest that teachers…

External cavity diode laser-based detection of trace gases with NICE-OHMS using current modulation.

Science.gov (United States)

Centeno, R; Mandon, J; Cristescu, S M; Axner, O; Harren, F J M

2015-03-09

We combine an external cavity diode laser with noise-immune cavity-enhanced optical heterodyne molecular spectroscopy (NICE-OHMS) using current modulation. With a finesse of 1600, we demonstrate noise equivalent absorption sensitivities of 4.1 x 10(-10) cm(-1) Hz(-1/2), resulting in sub-ppbv detection limits for Doppler-broadened transitions of CH(4) at 6132.3 cm(-1), C(2)H(2) at 6578.5 cm(-1) and HCN at 6541.7 cm(-1). The system is used for hydrogen cyanide detection from sweet almonds.

The Maritime Reaction Squadron

African Journals Online (AJOL)

a_mang

More recently, new marines were established in the form of the MRS, which signify ...... information is released to the media. Very limited .... As reported by The New York Times, statistics released by the ..... Squadron's nice new kit”. Navy News ...

An evaluation of the effect that the implementation of the NICE rules may have on a diagnostic imaging department for the early management of head injuries

International Nuclear Information System (INIS)

Hickman, C.; Harvey, J.

2007-01-01

Introduction: Guidelines by the National Institute of Clinical Excellence (NICE) for the early management of minor head injuries initiate the use of computed tomography (CT) for patients who may be at risk of developing intracranial haematoma. This retrospective study was designed to evaluate the effect the implementation of the NICE guidelines would have on the diagnostic imaging department of a local district general hospital. The main objective was to establish if there would be an increase in the number of CT head referrals for patients with minor head injuries. Secondly to assess how the implementation of these guidelines would affect the workload to the diagnostic imaging department in terms of cost and time, and to discuss the issue of radiation dose to patients. Method: A sample of 100 patients who were referred from the Accident and Emergency department (A and E) for plain skull radiographs, over a 4-month period were selected. The clinical information on each of these patients' was then extracted and a data collection sheet was to assess each patient according to the NICE criteria. Results and conclusion: The study found an 18% (n = 100) increase in the referral rate for CT heads for patients presenting with minor head injuries. It was also found that the use of these guidelines would mean a decrease in cost to the diagnostic imaging department of Pounds 324. Furthermore a saving of 10 h of radiographers' time was established, although the effective radiation dose to patients would be increased by 29 mSv. The NICE guidelines have proved efficient in identifying patients with intracranial damage although this coincides with an 18% (n = 100) increase in referral rates for CT and increased radiation dose to patients. However, the use of these guidelines would reduce workload to the diagnostic imaging department in terms of cost and time

A survey of the management of urinary tract infection in children in primary care and comparison with the NICE guidelines.

LENUS (Irish Health Repository)

Kennedy, Kieran M

2010-01-01

BACKGROUND: The aim of this study was to establish current practices amongst general practitioners in the West of Ireland with regard to the investigation, diagnosis and management of urinary tract infection (UTI) in children and to evaluate these practices against recently published guidelines from the National Institute for Health and Clinical Excellence (NICE). METHODS: A postal survey was performed using a questionnaire that included short clinical scenarios. All general practices in a single health region were sent a questionnaire, cover letter and SAE. Systematic postal and telephone contact was made with non-responders. The data was analysed using SPSS version 15. RESULTS: Sixty-nine general practitioners were included in the study and 50 (72%) responded to the questionnaire. All respondents agreed that it is important to consider diagnosis of UTI in all children with unexplained fever. Doctors accurately identified relevant risk factors for UTI in the majority (87%) of cases. In collecting urine samples from a one year old child, 80% of respondents recommended the use of a urine collection bag and the remaining 20% recommended collection of a clean catch sample. Respondents differed greatly in their practice with regard to detailed investigation and specialist referral after a first episode of UTI. Co-amoxiclav was the most frequently used antibiotic for the treatment of cystitis, with most doctors prescribing a five day course. CONCLUSIONS: In general, this study reveals a high level of clinical knowledge amongst doctors treating children with UTI in primary care in the catchment area of County Mayo. However, it also demonstrates wide variation in practice with regard to detailed investigation and specialist referral. The common practice of prescribing long courses of antibiotics when treating lower urinary tract infection is at variance with NICE\\'s recommendation of a three day course of antibiotics for cystitis in children over three months of age when

Comparative yield of positive brain Computed Tomography after implementing the NICE or SIGN head injury guidelines in two equivalent urban populations

Energy Technology Data Exchange (ETDEWEB)

Summerfield, R., E-mail: ruth.summerfield@uhns.nhs.u [Medical Imaging, University Hospital of North Staffordshire, City General Hospital, Stoke-on-Trent, Staffordshire ST4 6QG (United Kingdom); Macduff, R. [Glasgow Royal Infirmary, 84 Castle Street, Glasgow G4 0SF (United Kingdom); Davis, R. [Medical Imaging, University Hospital of North Staffordshire, City General Hospital, Stoke-on-Trent, Staffordshire ST4 6QG (United Kingdom); Sambrook, M. [Glasgow Royal Infirmary, 84 Castle Street, Glasgow G4 0SF (United Kingdom); Britton, I. [Medical Imaging, University Hospital of North Staffordshire, City General Hospital, Stoke-on-Trent, Staffordshire ST4 6QG (United Kingdom)

2011-04-15

Aims: To compare the yield of positive computed tomography (CT) brain examinations after the implementation of the National Institute for Clinical Excellence (NICE) or the Scottish Intercollegiate Guidance Network (SIGN) guidelines, in comparable urban populations in two teaching hospitals in England and Scotland. Materials and methods: Four hundred consecutive patients presenting at each location following a head injury who underwent a CT examination of the head according to the locally implemented guidelines were compared. Similar matched populations were compared for indication and yield. Yield was measured according to (1) positive CT findings of the sequelae of trauma and (2) intervention required with anaesthetic or intensive care unit (ICU) support, or neurosurgery. Results: The mean ages of patients at the English and Scottish centres were 49.9 and 49.2 years, respectively. Sex distribution was 64.1% male and 66.4% male respectively. Comparative yield was 23.8 and 26.5% for positive brain scans, 3 and 2.75% for anaesthetic support, and 3.75 and 2.5% for neurosurgical intervention. Glasgow Coma Score (GCS) <13 (NICE) and GCS {<=}12 and radiological or clinical evidence of skull fracture (SIGN) demonstrated the greatest statistical association with a positive CT examination. Conclusion: In a teaching hospital setting, there is no significant difference in the yield between the NICE and SIGN guidelines. Both meet the SIGN standard of >10% yield of positive scans. The choice of guideline to follow should be at the discretion of the local institution. The indications GCS <13 and clinical or radiological evidence of a skull fracture are highly predictive of intracranial pathology, and their presence should be an absolute indicator for fast-tracking the management of the patient.

Utah obstetricians' opinions of planned home birth and conflicting NICE/ACOG guidelines: A qualitative study.

Science.gov (United States)

Rainey, Emily; Simonsen, Sara; Stanford, Joseph; Shoaf, Kimberley; Baayd, Jami

2017-06-01

The United Kingdom's National Institute for Health and Care Excellence (NICE) recently published recommendations that support planned home birth for low-risk women. The American College of Obstetricians and Gynecologists (ACOG) remains wary of planned home birth, asserting that hospitals and birthing centers are the safest birth settings. Our objective was to examine opinions of obstetricians in Salt Lake City, Utah about home birth in the context of rising home birth rates and conflicting guidelines. Participants were recruited through online searches of Salt Lake City obstetricians and through snowball sampling. We conducted individual interviews exploring experiences with and attitudes toward planned home birth and the ACOG/NICE guidelines. Fifteen obstetricians who varied according to years of experience, location of medical training, sex, and subspecialty (resident, OB/GYN, maternal-fetal medicine specialist) were interviewed. Participants did not recommend home birth but supported a woman's right to choose her birth setting. Obstetrician opinions about planned home birth were shaped by misconceptions of home birth benefits, confusion surrounding the scope of care at home and among home birth providers, and negative transfer experiences. Participants were unfamiliar with the literature on planned home birth and/or viewed the evidence as unreliable. Support for ACOG guidelines was high, particularly in the context of the United States health care setting. Physician objectivity may be limited by biases against home birth, which stem from limited familiarity with published evidence, negative experiences with home-to-hospital transfers, and distrust of home birth providers in a health care system not designed to support home birth. © 2017 Wiley Periodicals, Inc.

Have a Nice Conflict How to Find Success and Satisfaction in the Most Unlikely Places

CERN Document Server

Scudder, Tim; Mitchell, Kent

2011-01-01

How to successfully navigate and prevent conflict From the publishers of the popular Strength Deployment Inventory, Have a Nice Conflict follows one man's fight to rescue his sinking career. Sales manager John Doyle would consider his career a success-he's his company's top revenue driver, and his take-charge attitude gets the job done. However, when he is passed over for promotion-again-after losing two direct reports, who cite his abrasive style as their reason for leaving, John is forced to reassess how he approaches his relationships. With the help of Mac, an expert in the art of Relations

Analysis of 100-lb(sub f) (445-N) LO2-LCH4 Reaction Control Engine Impulse Bit Performance

Science.gov (United States)

Marshall, William M.; Klenhenz, Julie E.

2012-01-01

Recently, liquid oxygen-liquid methane (LO2-LCH4) has been considered as a potential green propellant alternative for future exploration missions. The Propulsion and Cryogenic Advanced Development (PCAD) project was tasked by NASA to develop this propulsion combination to enable safe and cost-effective exploration missions. To date, limited experience with such combinations exist, and as a result a comprehensive test program is critical to demonstrating with the viability of implementing such a system. The NASA Glenn Research Center conducted a test program of a 100-lbf (445-N) reaction control engine (RCE) at the Center s Altitude Combustion Stand (ACS), focusing on altitude testing over a wide variety of operational conditions. The ACS facility includes unique propellant conditioning feed systems (PCFS), which allow precise control of propellant inlet conditions to the engine. Engine performance as a result of these inlet conditions was examined extensively during the test program. This paper is a companion to the previous specific impulse testing paper, and discusses the pulsed-mode operation portion of testing, with a focus on minimum impulse bit (MIB) and repeatable pulse performance. The engine successfully demonstrated target MIB performance at all conditions, as well as successful demonstration of repeatable pulse widths. Some anomalous conditions experienced during testing are also discussed, including a double pulse phenomenon, which was not noted in previous test programs for this engine.

Simulation of biodiesel combustion in a light-duty diesel engine using integrated compact biodiesel–diesel reaction mechanism

DEFF Research Database (Denmark)

Ng, Hoon Kiat; Gan, Suyin; Ng, Jo-Han

2013-01-01

This computational fluid dynamics (CFD) study is performed to investigate the combustion characteristics and emissions formation processes of biodiesel fuels in a light-duty diesel engine. A compact reaction mechanism with 80 species and 303 reactions is used to account for the effects of chemical...... kinetics. Here, the mechanism is capable of emulating biodiesel–diesel mixture of different blending levels and biodiesel produced from different feedstock. The integrated CFD-kinetic model was validated against a test matrix which covers the entire saturated–unsaturated methyl ester range typical...... of biodiesel fuels, as well as the biodiesel–diesel blending levels. The simulated cases were then validated for in-cylinder pressure profiles and peak pressure values/timings. Errors in the peak pressure values did not exceed 1%, while the variations in peak pressure timings were kept within 1.5 crank angle...

Numerical Analysis of the Interaction between Thermo-Fluid Dynamics and Auto-Ignition Reaction in Spark Ignition Engines

Science.gov (United States)

Saijyo, Katsuya; Nishiwaki, Kazuie; Yoshihara, Yoshinobu

The CFD simulations were performed integrating the low-temperature oxidation reaction. Analyses were made with respect to the first auto-ignition location in the case of a premixed-charge compression auto-ignition in a laminar flow field and in the case of the auto-ignition in an end gas during an S. I. Engine combustion process. In the latter simulation, the spatially-filtered transport equations were solved to express fluctuating temperatures in a turbulent flow in consideration of strong non-linearity to temperature in the reaction equations. It is suggested that the first auto-ignition location does not always occur at higher-temperature locations and that the difference in the locations of the first auto-ignition depends on the time period during which the local end gas temperature passes through the region of shorter ignition delay, including the NTC region.

Mass transfer with chemical reaction in multiphase systems

International Nuclear Information System (INIS)

Alper, E.

1983-01-01

These volumes deal with the phenomenon of 'mass transfer with chemical reaction' which is of industrial, biological and physiological importance. In process engineering, it is encountered both in separation processes and in reaction engineering and both aspects are covered here in four sections: introduction; gas-liquid system; liquid-liquid system; and gas-liquid-solid system

Deliberating Tarceva: A case study of how British NHS managers decide whether to purchase a high-cost drug in the shadow of NICE guidance.

Science.gov (United States)

Hughes, David; Doheny, Shane

2011-11-01

This paper examines audio-recorded data from meetings in which NHS managers decide whether to fund high-cost drugs for individual patients. It investigates the work of a Welsh individual patient commissioning (IPC) panel responsible for sanctioning the purchase of 'un-commissioned' treatments for exceptional cases. The case study presented highlights the changing rationales used for approving or denying a cancer drug, Tarceva, during a period when NICE first suggested it was not cost effective, but then changed its position in a final technology appraisal recommending use when the cost did not exceed that of an alternative product. Our data show how decisions taken in the shadow of NICE guidance remain complex and subject to local discretion. Guidance that takes time to prepare, is released in stages, and relates to particular disease stages, must be interpreted in the context of particular cases. The case-based IPC panel discourse stands in tension with the standardised population-based recommendations in guidance. Panel members, who based their decisions on the central notions of 'efficacy' and 'exceptionality', often struggled to apply NICE information on cost-effectiveness to their deliberations on efficacy (clinical effectiveness). The case study suggests that the complex nature of decision making makes standardization of outcomes very difficult to achieve, so that local professional judgement is likely to remain central to health care rationing at this level. Copyright © 2011 Elsevier Ltd. All rights reserved.

Preliminary delineation of natural geochemical reactions, Snake River Plain aquifer system, Idaho National Engineering Laboratory and vicinity, Idaho

International Nuclear Information System (INIS)

Knobel, L.L.; Bartholomay, R.C.; Orr, B.R.

1997-05-01

The U.S. Geological Survey, in cooperation with the U.S. Department of Energy, is conducting a study to determine the natural geochemistry of the Snake River Plain aquifer system at the Idaho National Engineering Laboratory (INEL), Idaho. As part of this study, a group of geochemical reactions that partially control the natural chemistry of ground water at the INEL were identified. Mineralogy of the aquifer matrix was determined using X-ray diffraction and thin-section analysis and theoretical stabilities of the minerals were used to identify potential solid-phase reactants and products of the reactions. The reactants and products that have an important contribution to the natural geochemistry include labradorite, olivine, pyroxene, smectite, calcite, ferric oxyhydroxide, and several silica phases. To further identify the reactions, analyses of 22 representative water samples from sites tapping the Snake River Plain aquifer system were used to determine the thermodynamic condition of the ground water relative to the minerals in the framework of the aquifer system. Principal reactions modifying the natural geochemical system include congruent dissolution of olivine, diopside, amorphous silica, and anhydrite; incongruent dissolution of labradorite with calcium montmorillonite as a residual product; precipitation of calcite and ferric oxyhydroxide; and oxidation of ferrous iron to ferric iron. Cation exchange reactions retard the downward movement of heavy, multivalent waste constituents where infiltration ponds are used for waste disposal

A Series of Seminars about NICE Environment during May / June 2004

CERN Multimedia

2004-01-01

Recently deployed at CERN, Windows XP and Office 2003 offer new functionalities. IT/IS Group has prepared a series of seminars to both introduce the CERN NICE environment to beginners and also to show how to benefit from the advanced features offered by the new versions of Windows and Office. Particular attention will be paid to Collaborative Tasks, like reviewing a document, planning a meeting and to Mobile Computing like working offline, remotely accessing CERN resources, etc.. Seminar planned for this week is: Make Office documents with Windows Word 2003 and Excel 2003 (EN), Thursday 17 June, 14:00 (special time). The seminars will take place in the IT Auditorium (bldg. 31, 3-005) and last for about one hour plus questions. No registration is necessary. More information is available at http://cern.ch/Win/Seminars/Tutorials. Interested users can also have a look to courses offered by CERN Technical Training, at http://cern.ch/humanresources/external/training/tech/office/te_office.asp.

Reaction π-p → eta'n in the 15-40 GeV/c momentum range

International Nuclear Information System (INIS)

Apel, W.D.; Augenstein, K.H.; Krueger, M.; Mueller, H.; Schinzel, D.; Schneider, H.; Sigurdsson, G.; Bertolucci, E.; Mannelli, I.; Pierazzini, G.M.; Quaglia, M.; Scribano, A.; Sergiampietri, F.; Vincelli, M.L.; Donskov, S.V.; Inyakin, A.V.; Johnson, R.; Kachanov, V.A.; Krasnokutsky, R.N.; Lednev, A.A.; Mikhailov, Yu.V.; Prokoshkin, Yu.D.; Shuvalov, R.S.; Kittenberger, V.; Leder, G.; Steuer, M.

1979-01-01

Measurements were made of the cross section of the reactions π - p → eta'(958)n, eta' → 2γ at momenta of 15, 20, 25, 30, and 40 GeV/c. The experiment was carried out on the IHEP 70 GeV accelerator using the 648 channel hodoscope spectrometer NICE for γ-ray detection. A total of 6000 eta' mesons were recorded. A sharp drop is seen in the differential cross section for t → 0. The dependences of the differential cross sections π - p → eta'n and π-p → etan on t are identical. On the basis of the ratio of the cross sections for these reactions at t = 0, i.e. R(eta'/n)sub(t=0) = 0.55 +- 0.06, the singlet-octet mixing angle for pseudoscalar mesons was determined to be β = -(18.2 +- 1.4) 0 . (Auth.)

A cost effectiveness study establishing the impact and accuracy of implementing the NICE guidelines lowering plasma NTproBNP threshold in patients with clinically suspected heart failure at our institution.

Science.gov (United States)

Webb, Jessica; Draper, Jane; Rua, Tiago; Yiu, Yee; Piper, Susan; Teall, Thomas; Fovargue, Lauren; Bolca, Elena; Jackson, Tom; Claridge, Simon; Sieniewicz, Ben; Porter, Bradley; McDiarmid, Adam; Rajani, Ronak; Kapetanakis, Stamatis; Rinaldi, Christopher A; Razavi, Reza; McDonagh, Theresa A; Carr-White, Gerald

2018-04-15

The 2014 National Institute of Clinical Excellence (NICE) guidelines on the management of acute heart failure recommended using a plasma NT-proBNP threshold of 300pg/ml to assist in ruling out the diagnosis of heart failure (HF), updating previous guidelines recommending using a threshold of 400pg/ml. NICE based their recommendations on 6 studies performed in other countries. This study sought to determine the diagnostic and economic implications of using these thresholds in a large unselected UK population. Patient and clinical demographics were recorded for all consecutive suspected HF patients over 12months, as well as clinical outcomes including time to HF hospitalisation and time to death (follow up 15.8months). Of 1995 unselected patients admitted with clinically suspected HF, 1683 (84%) had a NTproBNP over the current NICE recommended threshold, of which 35% received a final diagnosis of HF. Lowering the threshold from 400 to 300pg/ml would have involved screening an additional 61 patients and only would have identified one new patient with HF (sensitivity 0.985, NPV 0.976, area under the curve (AUC) at 300pg/ml 0.67; sensitivity 0.983, NPV 0.977, AUC 0.65 at 400pg/ml). The economic implications of lowering the threshold would have involved additional costs of £42,842.04 (£702.33 per patient screened, or £ 42,824.04 per new HF patient). Applying the recent updated NICE guidelines to an unselected real world population increases the AUC but would have a significant economic impact and only identified one new patient with heart failure. Copyright © 2017 Elsevier B.V. All rights reserved.

π-p→ωn reaction at momenta from 15 to 40 GeV/c

International Nuclear Information System (INIS)

Apel, W.D.; Augenstein, K.H.; Bertolucci, E.; Vincelli, M.L.; Donskov, S.V.; Inyakin, A.; Kachanov, V.A.; Quaglia, M.; Krasnokutsky, R.N.; Krueger, M.; Leder, G.; Lednev, A.A.; Mannelli, I.; Mikhailov, Y.V.; Mueller, H.; Prokoshkin, Y.D.; Pierazzini, G.M.; Sergiampietri, F.; Sigurdsson, G.; Scribano, A.; Schneider, H.; Shuvalov, R.S.

1980-01-01

Cross sections for the reaction π - p→ωn, ω→π 0 γ have been measured with good statistics at incident-pion momenta of 15, 20, 25, 30, and 40 GeV/c. The experiments were performed at the 70-GeV IHEP accelerator, using the NICE 648-channel hodoscopic spectrometer. The density matrix elements and the differential and integrated cross sections for the reaction have been determined. The unnatural-parity exchange contribution to the production of ω mesons in the state with helicity 1 is already insignificant at 15 GeV/c. With increasing Vertical BartVertical Bar the differential cross sections pass through a maximum at Vertical BartVertical Barapprox. =0.12 (GeV/c) 2 and then fall exponentially until Vertical BartVertical Barapprox. =0.7 (GeV/c) 2 ; at that point the curve bends sharply, the cross section falling off much less rapidly for larger values of Vertical BartVertical Bar

Reaction π-p→etan in the 15 to 40 GeV/c momentum range

International Nuclear Information System (INIS)

Apel, W.D.; Augenstein, K.H.; Krueger, M.; Mueller, H.; Schinzel, D.; Schneider, H.; Sigurdsson, G.; Staudenmaier, H.M.; Thys, A.; Bertolucci, E.; Franceschini, R.; Givoletti, M.; Mannelli, I.; Pierazzini, G.M.; Quaglia, M.; Scribano, A.; Sergiampietri, F.; Vincelli, M.L.; Bushnin, Yu.B.; Donskov, S.V.; Grachev, M.I.; Inyakin, A.V.; Johnson, R.; Kachanov, V.A.; Krasnokutsky, R.N.; Lednev, A.A.; Mikhailov, Yu.V.; Prokoshkin, Yu.D.; Shuvalov, R.S.; Toropin, A.N.; Kittenberger, W.; Leder, G.; Oberparleiter, R.; Pernicka, M.; Steuer, M.

1979-01-01

A high statistics measurement of the reaction π - p → etan; eta → 2γ has been performed at the 70 GeV Serpukhov accelerator for 15,20,25,30 and 40 GeV/c incident pion momentum using the NICE set-up with its associated 648-channel hodoscope spectrometer for γ-ray detection. It is found that the spin-flip and non-spin-flip amplitudes can be parametrized, for small mod(t), as exponentials with the same slopes to within a few percent. For mod(t) > approximately 1 (GeV/c) 2 there is a break in the differential cross sections. In addition, the A 2 effective trajectory deviates markedly for smaller mod(t). (Auth.)

Abiraterone Acetate for the Treatment of Chemotherapy-Naive Metastatic Castration-Resistant Prostate Cancer : An Evidence Review Group Perspective of an NICE Single Technology Appraisal

NARCIS (Netherlands)

Ramaekers, Bram L. T.; Riemsma, Rob; Tomini, Florian; van Asselt, Thea; Deshpande, Sohan; Duffy, Steven; Armstrong, Nigel; Severens, Johan L.; Kleijnen, Jos; Joore, Manuela A.

The National Institute for Health and Care Excellence (NICE) invited Janssen, the company manufacturing abiraterone acetate (AA; tradename Zytiga(A (R))), to submit evidence for the clinical and cost effectiveness of AA in combination with prednisone/prednisolone (AAP) compared with watchful waiting

Crizotinib for Untreated Anaplastic Lymphoma Kinase-Positive Non-Small-Cell Lung Cancer: An Evidence Review Group Perspective of a NICE Single Technology Appraisal.

Science.gov (United States)

Morgan, Philip; Woolacott, Nerys; Biswas, Mousumi; Mebrahtu, Teumzghi; Harden, Melissa; Hodgson, Robert

2017-09-01

As part of the National Institute for Health and Care Excellence (NICE) single technology appraisal process, the manufacturer of crizotinib submitted evidence on the clinical and cost effectiveness of crizotinib in untreated anaplastic lymphoma kinase-positive (ALK-positive) non-small-cell lung cancer (NSCLC). Crizotinib has previously been assessed by NICE for patients with previously treated ALK-positive NSCLC (TA 296). It was not approved in this previous appraisal, but had been made available through the cancer drugs fund. As part of this new appraisal, the company included a price discount patient access scheme (PAS). The Centre for Reviews and Dissemination and Centre for Health Economics Technology Appraisal Group at the University of York was commissioned to act as the independent Evidence Review Group (ERG). This article provides a description of the company's submission and the ERG's review and summarises the resulting NICE guidance issued in August 2016. The main clinical-effectiveness data were derived from a multicentre randomised controlled trial-PROFILE 1014-that compared crizotinib with pemetrexed chemotherapy in combination with carboplatin or cisplatin in patients with untreated non-squamous ALK-positive NSCLC. In the trial, crizotinib demonstrated improvements in progression-free survival (PFS) and overall survival (OS). The company's economic model was a three-state 'area under the curve' Markov model. The base-case incremental cost-effectiveness ratio (ICER) was estimated to be greater than £50,000 per quality-adjusted life-year (QALY) gained (excluding the PAS discount). The ERG assessment of the evidence submitted by the company raised a number of concerns. In terms of the clinical evidence, the OS benefit was highly uncertain due to the cross-over permitted in the trial and the immaturity of the data; only 26% of events had occurred by the data cut-off point. In the economic modelling, the most significant concerns related to the analysis

State of Arctic Sea Ice North of Svalbard during N-ICE2015

Science.gov (United States)

Rösel, Anja; King, Jennifer; Gerland, Sebastian

2016-04-01

The N-ICE2015 cruise, led by the Norwegian Polar Institute, was a drift experiment with the research vessel R/V Lance from January to June 2015, where the ship started the drift North of Svalbard at 83°14.45' N, 21°31.41' E. The drift was repeated as soon as the vessel drifted free. Altogether, 4 ice stations where installed and the complex ocean-sea ice-atmosphere system was studied with an interdisciplinary Approach. During the N-ICE2015 cruise, extensive ice thickness and snow depth measurements were performed during both, winter and summer conditions. Total ice and snow thickness was measured with ground-based and airborne electromagnetic instruments; snow depth was measured with a GPS snow depth probe. Additionally, ice mass balance and snow buoys were deployed. Snow and ice thickness measurements were performed on repeated transects to quantify the ice growth or loss as well as the snow accumulation and melt rate. Additionally, we collected independent values on surveys to determine the general ice thickness distribution. Average snow depths of 32 cm on first year ice, and 52 cm on multi-year ice were measured in January, the mean snow depth on all ice types even increased until end of March to 49 cm. The average total ice and snow thickness in winter conditions was 1.92 m. During winter we found a small growth rate on multi-year ice of about 15 cm in 2 months, due to above-average snow depths and some extraordinary storm events that came along with mild temperatures. In contrast thereto, we also were able to study new ice formation and thin ice on newly formed leads. In summer conditions an enormous melt rate, mainly driven by a warm Atlantic water inflow in the marginal ice zone, was observed during two ice stations with melt rates of up to 20 cm per 24 hours. To reinforce the local measurements around the ship and to confirm their significance on a larger scale, we compare them to airborne thickness measurements and classified SAR-satellite scenes. The

High catalytic activity and stability of Ni/CexZr1-xO2/MSU-H for CH4/CO2 reforming reaction

Science.gov (United States)

Chang, Xiaoqian; Liu, Bingsi; Xia, Hong; Amin, Roohul

2018-06-01

How to reduce emission of CO2 as greenhouse gases, which resulted in global warming, is of very important significance. A series of Ni/CexZr1-xO2/MSU-H catalysts was prepared by means of hexagonally ordered mesoporous MSU-H with thermal and hydrothermal stabilities, which is cheap and can be synthesized in the large scale. The 10%Ni/Ce0.75Zr0.25O2/MSU-H catalyst presents high catalytic activity, stability and the ability of coke-resistance for CH4/CO2 reforming reaction due to high SBET (428 m2/g) and smaller Nio nanoparticle size (3.14 nm). The high dispersed Nio nanoparticles over MSU-H promoted the decomposition of CH4 and the carbon species accumulated on active Nio sites reacting with crystal lattice oxygen in Ce0.75Zr0.25O2 to form CO molecules. In the meantime, the remained oxygen vacancies on the interface between Nio and Ce0.75Zr0.25O2 could be supplemented via CO2. HRTEM images and XRD results of Ni/Ce0.75Zr0.25O2/MSU-H verified that high dispersion of Ni nanoparticles over Ni/Ce0.75Zr0.25O2/MSU-H correlated closely with the synergistic action between Ce0.75Zr0.25O2 and MSU-H as well as hexagonally ordered structure of MSU-H, which can provide effectively the oxygen storage capacity and inhibit the formation of coke.

Are current UK National Institute for Health and Clinical Excellence (NICE) obesity risk guidelines useful? Cross-sectional associations with cardiovascular disease risk factors in a large, representative English population.

Science.gov (United States)

Tabassum, Faiza; Batty, G David

2013-01-01

The National Institute for Health and Clinical Excellence (NICE) has recently released obesity guidelines for health risk. For the first time in the UK, we estimate the utility of these guidelines by relating them to the established cardiovascular disease (CVD) risk factors. Health Survey for England (HSE) 2006, a population-based cross-sectional study in England was used with a sample size of 7225 men and women aged ≥35 years (age range: 35-97 years). The following CVD risk factor outcomes were used: hypertension, diabetes, total and high density lipoprotein cholesterol, glycated haemoglobin, fibrinogen, C-reactive protein and Framingham risk score. Four NICE categories of obesity were created based on body mass index (BMI) and waist circumference (WC): no risk (up to normal BMI and low/high WC); increased risk (normal BMI & very high WC, or obese & low WC); high risk (overweight & very high WC, or obese & high WC); and very high risk (obese I & very high WC or obese II/III with any levels of WC. Men and women in the very high risk category had the highest odds ratios (OR) of having unfavourable CVD risk factors compared to those in the no risk category. For example, the OR of having hypertension for those in the very high risk category of the NICE obesity groupings was 2.57 (95% confidence interval 2.06 to 3.21) in men, and 2.15 (1.75 to 2.64) in women. Moreover, a dose-response association between the adiposity groups and most of the CVD risk factors was observed except total cholesterol in men and low HDL in women. Similar results were apparent when the Framingham risk score was the outcome of interest. In conclusion, the current NICE definitions of obesity show utility for a range of CVD risk factors and CVD risk in both men and women.

Financial aspects of arthroplasty options for intra-capsular neck of femur fractures: a cost analysis study to review the financial impacts of implementing NICE guidelines in the NHS organisations.

Science.gov (United States)

Horriat, S; Hamilton, P D; Sott, A H

2015-02-01

To review the financial aspects of implementing the latest NICE guideline for neck of femur fracture (CG124), which recommends offering Total Hip Replacement (THR) as an alternative to hemiarthroplasty (HA) for patients, who are independently mobile before injury, not cognitively impaired and well enough to tolerate the operation. Between April 2011 and April 2013 data collected from our Hip Fracture database (NHFD) showed that by following the latest NICE guideline (CG124), out of 840 patients, 176 patients (21%) should be considered for THR rather than HA. Individual procedure costs were calculated by considering cost of implants and consumables (extracted from providers' published catalogues) added to the cost of running operating theatre for each operation. We then used the national tariff for each procedure using relevant HRG codes to calculate the total cost and the income to the Trust. Our data indicated that by implementing the latest NICE guideline (CG124), 37.1% of patients with intra-capsular fracture neck of femur (IC-NOF fracture) would be eligible for THR rather than HA. Although performing cemented THR was the more expensive procedure, our calculation shows that despite increased cost of performing the operation, Trusts can increase their net income by £300-600 (depending on their market force factor) per patient using correct HRG coding and National Tariff. Utilising 2012-13 National Tariff, performing a cemented THR instead of a HA for patients with IC-NOF fracture, as recommended by the latest NICE guideline (CG124) can increase the Trust's revenue per patient in a predictable way. This practice not only results in potentially better patient outcomes but also can increase financial reward and potential for reinvestment in all hip fracture units in the UK. Copyright © 2014 Elsevier Ltd. All rights reserved.

Atrial fibrillation in a primary care population: how close to NICE guidelines are we?

LENUS (Irish Health Repository)

Loo, Bryan

2009-06-01

The National Institute for Health and Clinical Excellence (NICE) guidelines for the management of atrial fibrillation were published in June 2006. It was anticipated that they would potentially lead to increased demand for echocardiography (ECHO), increased access to secondary care services (for example for cardioversion), and require additional resources for monitoring anticoagulation. A primary care survey was therefore initiated in South Devon, in advance of publication of the guidelines as a snapshot of existing practice, to determine any additional resources and education required to meet the new standards. The main aim was to determine what proportion of patients were managed exclusively in primary care, how frequently patients were investigated by ECHO and whether anticoagulation was being appropriately targeted at patients at high risk of thromboembolic events.

Dabigatran for the prevention of stroke and systemic embolism in atrial fibrillation: A NICE single technology appraisal.

Science.gov (United States)

Faria, Rita; Spackman, Eldon; Burch, Jane; Corbacho, Belen; Todd, Derick; Pepper, Chris; Woolacott, Nerys; Palmer, Stephen

2013-07-01

The National Institute for Health and Clinical Excellence (NICE) invited the manufacturer of dabigatran etexilate (Boehringer Ingelheim Ltd, UK) to submit evidence for the clinical and cost-effectiveness of this drug for the prevention of stroke and systemic embolism in patients with non-valvular atrial fibrillation (AF) as part of the NICE single technology appraisal process. The Centre for Reviews and Dissemination and the Centre for Health Economics at the University of York were commissioned to act as the evidence review group (ERG). This article presents a summary of the manufacturer's submission, the ERG report and the subsequent development of NICE guidance for the use of dabigatran within the UK National Health Service. Dabigatran was granted marketing authorisation by the European Medicines Agency for a sequential dosing regimen (DBG sequential), in which patients under 80 years are treated with dabigatran 150 mg twice daily (DBG150) and patients 80 years and over are given dabigatran 110 mg twice daily (DBG110). NICE decisions are bound by the marketing authorisation; therefore, the decision problem faced by the committee was whether the DBG sequential regimen was effective and cost-effective compared with warfarin or aspirin for patients with non-valvular AF and one or more risk factors. The RE-LY trial, a large multi-centre non-inferiority randomised clinical trial, was the primary source of clinical evidence. DBG150 was shown to be non-inferior, and subsequently superior to warfarin, for the primary outcome of all stroke/systemic embolism. DBG110 was found to be non-inferior to warfarin. Results were presented for a post hoc subgroup analysis for patients under and over 80 years of age, where DBG110 showed a statistically significant reduction of haemorrhagic stroke and intracranial haemorrhage in comparison to warfarin in patients over 80 years of age. This post hoc subgroup analysis by age was the basis for the licensed DBG sequential regimen

Heterogeneous reactions of dioctahedral smectites in illite-smectite and kaolinite-smectite mixed-layers: applications to clay materials for engineered barriers

International Nuclear Information System (INIS)

Meunier, A.; Proust, D.; Beaufort, D.; Lajudie, A.; Petit, J.-C.

1992-01-01

The clay materials selected for use in the engineered barriers of the French nuclear waste isolation programme are mainly composed of dioctahedral smectite, either bentonite of Wyoming type or kaolinite-smectites most often consist of randomly stacked layers with low and high charges. In the case of the Wyoming-type bentonite, these two differently charged layers do not react in the same way when subjected to hydrothermal alteration. Overall, the low-charge smectite layers react to form high-charge smectite layers + quartz + kaolinite. Then, fixing K ions, the high-charge smectite layers are transformed into illite-smectite mixed-layers (I/S) when the temperature conditions increase. A symmetrical process is observed in natural or experimental hydrothermal conditions when the high-charge smectite layers of I/S minerals react with quartz and/or kaolinite to produce low-charge smectite layers. The chemical properties of the bentonite-engineered barriers clearly depend on the low charge/high charge smectite layer proportion, which is in turn controlled by the temperature-dependent reactions in the vicinity of the waste disposal. Although there are fewer published data on the kaolinite-smectite mixed-layered minerals (K/S), a similar low charge-high charge reaction appears to affect their smectite component. The experimental alteration of K/S leads to the formation of a low-charge beidellite with an increase in the cation-exchange capacity and in the expandability of the clay material. Thus, the properties of the engineered barrier seems to be improved after hydrothermal alteration. (Author)

Engineered Photosystem II reaction centers optimize photochemistry versus photoprotection at different solar intensities.

Science.gov (United States)

Vinyard, David J; Gimpel, Javier; Ananyev, Gennady M; Mayfield, Stephen P; Dismukes, G Charles

2014-03-12

The D1 protein of Photosystem II (PSII) provides most of the ligating amino acid residues for the Mn4CaO5 water-oxidizing complex (WOC) and half of the reaction center cofactors, and it is present as two isoforms in the cyanobacterium Synechococcus elongatus PCC 7942. These isoforms, D1:1 and D1:2, confer functional advantages for photosynthetic growth at low and high light intensities, respectively. D1:1, D1:2, and seven point mutations in the D1:2 background that are native to D1:1 were expressed in the green alga Chlamydomonas reinhardtii. We used these nine strains to show that those strains that confer a higher yield of PSII charge separation under light-limiting conditions (where charge recombination is significant) have less efficient photochemical turnover, measured in terms of both a lower WOC turnover probability and a longer WOC cycle period. Conversely, these same strains under light saturation (where charge recombination does not compete) confer a correspondingly faster O2 evolution rate and greater protection against photoinhibition. Taken together, the data clearly establish that PSII primary charge separation is a trade-off between photochemical productivity (water oxidation and plastoquinone reduction) and charge recombination (photoprotection). These trade-offs add up to a significant growth advantage for the two natural isoforms. These insights provide fundamental design principles for engineering of PSII reaction centers with optimal photochemical efficiencies for growth at low versus high light intensities.

Impact of NICE guidance on rates of haemorrhage after tonsillectomy: an evaluation of guidance issued during an ongoing national tonsillectomy audit.

Science.gov (United States)

Audit, National Prospective Tonsillectomy

2008-08-01

The National Institute for Health and Clinical Excellence (NICE) issued guidance on surgical techniques for tonsillectomy during a national audit of surgical practice and postoperative complications. To assess the impact of the guidance on tonsillectomy practice and outcomes. An interrupted time-series analysis of routinely collected Hospital Episodes Statistics data, and an analysis of longitudinal trends in surgical technique using data from the National Prospective Tonsillectomy Audit. Patients undergoing tonsillectomy in English NHS hospitals between January 2002 and December 2004. Postoperative haemorrhage within 28 days. The rate of haemorrhage increased by 0.5% per year from 2002, reaching 6.4% when the guidance was published. After publication, the rate of haemorrhage fell immediately to 5.7% (difference 0.7%: 95% CI -1.3% to 0.0%) and the rate of increase appeared to have stopped. Data from the National Prospective Tonsillectomy Audit showed that the fall coincided with a shift in surgical techniques, which was consistent with the guidance. NICE guidance influenced surgical tonsillectomy technique and in turn produced an immediate fall in postoperative haemorrhage. The ongoing national audit and strong support from the surgical specialist association may have aided its implementation.

An autonomous organic reaction search engine for chemical reactivity

Science.gov (United States)

Dragone, Vincenza; Sans, Victor; Henson, Alon B.; Granda, Jaroslaw M.; Cronin, Leroy

2017-06-01

The exploration of chemical space for new reactivity, reactions and molecules is limited by the need for separate work-up-separation steps searching for molecules rather than reactivity. Herein we present a system that can autonomously evaluate chemical reactivity within a network of 64 possible reaction combinations and aims for new reactivity, rather than a predefined set of targets. The robotic system combines chemical handling, in-line spectroscopy and real-time feedback and analysis with an algorithm that is able to distinguish and select the most reactive pathways, generating a reaction selection index (RSI) without need for separate work-up or purification steps. This allows the automatic navigation of a chemical network, leading to previously unreported molecules while needing only to do a fraction of the total possible reactions without any prior knowledge of the chemistry. We show the RSI correlates with reactivity and is able to search chemical space using the most reactive pathways.

Reaction π-p → π0n in the 15-40 GeV/c momentum range

International Nuclear Information System (INIS)

Apel, W.D.; Augenstein, K.H.; Krueger, M.; Mueller, H.; Schinzel, D.; Schneider, H.; Sigurdsson, G.; Bertolucci, E.; Mannelli, I.; Pierazzini, G.M.; Quaglia, M.; Scribano, A.; Sergiampietri, F.; Vincelli, M.L.; Donskov, S.V.; Inyakin, A.V.; Johnson, R.; Kachanov, V.A.; Krasnokutsky, R.N.; Lednev, A.A.; Mikhailov, Yu.V.; Prokoshkin, Yu. D.; Shuvalov, R.S.; Toropin, A.N.; Leder, G.; Steuer, M.

1979-01-01

A high statistics measurement of the reaction π - p → π 0 n has been performed at the Serpukhov accelerator for 15, 20, 25, 30 and 40 GeV/c incident pion momentum using the NICE set-up with its associated 648-channel hodoscope spectrometer for γ-ray detection. More than 3 million charge-exchange events have been recorded in total. It is found that the spin-flip and non-spin-flip amplitudes can be parametrized, for small mod(t) as exponentials with the same slopes to within a few per cent. Also the behaviour of the differential cross section for small and medium mod(t) agrees with the prediction of a geometrical s-channel model which describes binary reactions in terms of a complex pole b 0 (s). The imaginary part of this universal pole, Im b 0 (s), has been determined and found to be growing logarithmically with s. (Auth.)

International co-operation and the future of nuclear power. European Nuclear Congress '98, Nice, 26 October 1998

International Nuclear Information System (INIS)

ElBaradei, M.

1998-01-01

The document reproduces the text of the conference given by the Director General of the IAEA at the joint Opening Session of the European Nuclear Congress'98 (ENC) and RECOD in Nice, France, on 26 october 1998. The conference emphasized the importance of strengthened international co-operation in all areas relevant to the safe and peaceful use of nuclear energy, especially for power generation. As the only intergovernmental global organization dedicated to nuclear science and technology, the role of the IAEA is to serve as the international focal point for standard setting, independent analysis, technology transfer and oversight and verification

Ramucirumab for Treating Advanced Gastric Cancer or Gastro-Oesophageal Junction Adenocarcinoma Previously Treated with Chemotherapy : An Evidence Review Group Perspective of a NICE Single Technology Appraisal

NARCIS (Netherlands)

Büyükkaramikli, N.; H.M. Blommestein (Hedwig); R. Riemsma (Rob); N. Armstrong (Nigel); F.J. Clay (Fiona); J. Ross (Janine); G. Worthy (Gill); J.L. Severens (Hans); J. Kleijnen (Jos); M.J. Al (Maiwenn)

2017-01-01

textabstractThe National Institute for Health and Care Excellence (NICE) invited the company that manufactures ramucirumab (Cyramza®, Eli Lilly and Company) to submit evidence of the clinical and cost effectiveness of the drug administered alone (monotherapy) or with paclitaxel (combination therapy)

Metabolite damage and repair in metabolic engineering design.

Science.gov (United States)

Sun, Jiayi; Jeffryes, James G; Henry, Christopher S; Bruner, Steven D; Hanson, Andrew D

2017-11-01

The necessarily sharp focus of metabolic engineering and metabolic synthetic biology on pathways and their fluxes has tended to divert attention from the damaging enzymatic and chemical side-reactions that pathway metabolites can undergo. Although historically overlooked and underappreciated, such metabolite damage reactions are now known to occur throughout metabolism and to generate (formerly enigmatic) peaks detected in metabolomics datasets. It is also now known that metabolite damage is often countered by dedicated repair enzymes that undo or prevent it. Metabolite damage and repair are highly relevant to engineered pathway design: metabolite damage reactions can reduce flux rates and product yields, and repair enzymes can provide robust, host-independent solutions. Herein, after introducing the core principles of metabolite damage and repair, we use case histories to document how damage and repair processes affect efficient operation of engineered pathways - particularly those that are heterologous, non-natural, or cell-free. We then review how metabolite damage reactions can be predicted, how repair reactions can be prospected, and how metabolite damage and repair can be built into genome-scale metabolic models. Lastly, we propose a versatile 'plug and play' set of well-characterized metabolite repair enzymes to solve metabolite damage problems known or likely to occur in metabolic engineering and synthetic biology projects. Copyright © 2017 International Metabolic Engineering Society. All rights reserved.

Teaching Reaction Engineering Using the Attainable Region

Science.gov (United States)

Metzger, Matthew J.; Glasser, Benjamin J.; Glasser, David; Hausberger, Brendon; Hildebrandt, Diane

2007-01-01

Ask a graduating chemical engineering student the following question: What makes one reactor different from the next? The answers received will often be unsatisfactory and will vary widely in scope. Some may cite the difference between the basic design equations, others may point out a PFR is "longer," and still others may state that it…

Thermodynamics in finite time: A chemically driven engine

International Nuclear Information System (INIS)

Ondrechen, M.J.; Berry, R.S.; Andresen, B.

1980-01-01

The methods of finite time thermodynamics are applied to processes whose relaxation parameters are chemical rate coefficients within the working fluid. The direct optimization formalism used previously for heat engines with friction and finite heat transfer rates: termed the tricycle method: is extended to heat engines driven by exothermic reactions. The model is a flow reactor coupled by a heat exchanger to an engine. Conditions are established for the achievement of maximum power from such a system. Emphasis is on how the chemical kinetics control the finite-time thermodynamic extrema; first order, first order reversible, and second order reaction kinetics are analyzed. For the types of reactions considered here, there is always a finite positive flow rate in the reactor that yields maximum engine power. Maximum fuel efficiency is always attained in these systems at the uninteresting limit of zero flow rate

Winter snow conditions on Arctic sea ice north of Svalbard during the Norwegian young sea ICE (N-ICE2015) expedition

Science.gov (United States)

Merkouriadi, Ioanna; Gallet, Jean-Charles; Graham, Robert M.; Liston, Glen E.; Polashenski, Chris; Rösel, Anja; Gerland, Sebastian

2017-10-01

Snow is a crucial component of the Arctic sea ice system. Its thickness and thermal properties control heat conduction and radiative fluxes across the ocean, ice, and atmosphere interfaces. Hence, observations of the evolution of snow depth, density, thermal conductivity, and stratigraphy are crucial for the development of detailed snow numerical models predicting energy transfer through the snow pack. Snow depth is also a major uncertainty in predicting ice thickness using remote sensing algorithms. Here we examine the winter spatial and temporal evolution of snow physical properties on first-year (FYI) and second-year ice (SYI) in the Atlantic sector of the Arctic Ocean, during the Norwegian young sea ICE (N-ICE2015) expedition (January to March 2015). During N-ICE2015, the snow pack consisted of faceted grains (47%), depth hoar (28%), and wind slab (13%), indicating very different snow stratigraphy compared to what was observed in the Pacific sector of the Arctic Ocean during the SHEBA campaign (1997-1998). Average snow bulk density was 345 kg m-3 and it varied with ice type. Snow depth was 41 ± 19 cm in January and 56 ± 17 cm in February, which is significantly greater than earlier suggestions for this region. The snow water equivalent was 14.5 ± 5.3 cm over first-year ice and 19 ± 5.4 cm over second-year ice.

EFFECT OF RHODIUM INFILTRATION ON THE MICROSTRUCTURE AND PERFORMANCE OF Ni/Ce0.8Gd0.2O2-δ CERMET ANODE FOR LOW TEMPERATURE SOLID OXIDE FUEL CELL

Directory of Open Access Journals (Sweden)

F. Torknik

2016-03-01

Full Text Available In order to further enhance the Ni/Ce 0.8Gd0.2O2-δ (Ni/GDC20 cermet anodic performance for low temperature solid oxide fuel cell (LT-SOFC, a study was conducted on the nanostructuring of NiO/GDC composite by only once wet-infiltration of rhodium chloride precursor. By using electrochemical impedance spectroscopy (EIS analysis, the effect of only one drop of Rh-infiltrating solution on the anodic polarization resistance was examined using symmetric Ni–GDC20|GDC20|Pt electrolyte-supported cell at 400-600 °C. Nanostructural evolution before and after H 2 reduction at 600 °C and also after anodic performance test was investigated by atomic force microscopy (AFM, field emission scanning electron microscopy (FE-SEM, and transmission electron microscopy (TEM techniques in comparison to the anode itself. Despite the fine distribution of Rh-infiltrated nanoparticles having average particle size of 11.7 nm, the results showed ineffectiveness and inability of the Rh nanoparticles to succeed in decreasing of anodic polarization resistance for H 2 oxidation reaction in LT-SOFC.

Curing behavior and reaction kinetics of binder resins for 3D-printing investigated by dielectric analysis (DEA)

Science.gov (United States)

Möginger, B.; Kehret, L.; Hausnerova, B.; Steinhaus, J.

2016-05-01

3D-Printing is an efficient method in the field of additive manufacturing. In order to optimize the properties of manufactured parts it is essential to adapt the curing behavior of the resin systems with respect to the requirements. Thus, effects of resin composition, e.g. due to different additives such as thickener and curing agents, on the curing behavior have to be known. As the resin transfers from a liquid to a solid glass the time dependent ion viscosity was measured using DEA with flat IDEX sensors. This allows for a sensitive measurement of resin changes as the ion viscosity changes two to four decades. The investigated resin systems are based on the monomers styrene and HEMA. To account for the effects of copolymerization in the calculation of the reaction kinetics it was assumed that the reaction can be considered as a homo-polymerization having a reaction order n≠1. Then the measured ion viscosity curves are fitted with the solution of the reactions kinetics - the time dependent degree of conversion (DC-function) - for times exceeding the initiation phase representing the primary curing. The measured ion viscosity curves can nicely be fitted with the DC-function and the determined fit parameters distinguish distinctly between the investigated resin compositions.

The Structure of the Distant Kuiper Belt in a Nice Model Scenario

Energy Technology Data Exchange (ETDEWEB)

Pike, R. E.; Shankman, C. J.; Kavelaars, J. J. [Department of Physics and Astronomy, University of Victoria, Victoria, BC (Canada); Lawler, S. [National Research Council of Canada, Victoria, BC (Canada); Brasser, R. [Earth Life Science Institute, Tokyo Institute of Technology, Meguro, Tokyo 152-8550 (Japan); Alexandersen, M. [Institute of Astronomy and Astrophysics, Academia Sinica, Taipei 10617, Taiwan (China)

2017-03-01

This work explores the orbital distribution of minor bodies in the outer Solar System emplaced as a result of a Nice model migration from the simulations of Brasser and Morbidelli. This planetary migration scatters a planetesimal disk from between 29 and 34 au and emplaces a population of objects into the Kuiper Belt region. From the 2:1 Neptune resonance and outward, the test particles analyzed populate the outer resonances with orbital distributions consistent with trans-Neptunian object (TNO) detections in semimajor axis, inclination, and eccentricity, while capture into the closest resonances is too efficient. The relative populations of the simulated scattering objects and resonant objects in the 3:1 and 4:1 resonances are also consistent with observed populations based on debiased TNO surveys, but the 5:1 resonance is severely underpopulated compared to population estimates from survey results. Scattering emplacement results in the expected orbital distribution for the majority of the TNO populations; however, the origin of the large observed population in the 5:1 resonance remains unexplained.

For information: A Series of Seminars about NICE Environment during May / June 2004

CERN Multimedia

2004-01-01

Recently deployed at CERN, Windows XP and Office 2003 offer new functionalities. IT/IS Group has prepared a series of seminars to both introduce the CERN NICE environment to beginners and also to show how to benefit from the advanced features offered by the new versions of Windows and Office. Particular attention will be paid to Collaborative Tasks, like reviewing a document, planning a meeting and to Mobile Computing like working offline, remotely accessing CERN resources, etc.. The last seminar will be about: Making presentations with Powerpoint 2003 (FR), Tuesday 22nd of June, 14:30. The seminars will take place in the IT Auditorium (bldg. 31, 3-005) and last for about one hour plus questions. No registration is necessary. More information is available at http://cern.ch/Win/Seminars/Tutorials. Interested users can also have a look to courses offered by CERN Technical Training, at http://cern.ch/humanresources/external/training/tech/office/te_office.asp.

Reaction π-p→ωn in the (15/40) GeV/c momentum range

International Nuclear Information System (INIS)

Apel, W.D.; Augenstein, K.H.; Krueger, M.; Mueller, H.; Schneider, H.; Sigurdsson, G.; Donskov, S.V.; Inyakin, A.V.; Kachanov, V.A.; Krasnokutsky, R.N.; Lednev, A.A.; Mikhailov, Yu.V.; Prokoshkin, Yu.D.; Shuvalov, R.S.; Leder, G.

1979-01-01

A high statistics measurement of the reaction π - p→ωn with ω→π 0 γ has been performed at the 70 GeV Serpukhov accelerator for 15, 20.2, 25, 30 and 40 GeV/c incident pion momentum, using the NICE set-up with its associated 648-channel γ-ray spectrometer. Values of the density matrix elements, differential and integral cross sections are reported. Already at 15 GeV/c, the unnatural parity exchange contribution to ω production in helicity 1 state is negligible. After a maximum around /t/ approximately equal to 0.12 (GeV/c) 2 , the differential cross section decreases exponentially up to /t/ approximately equal to 0.7 (GeV/c) 2 , where a break is seen in its slope. (author)

Metabolite damage and repair in metabolic engineering design

Energy Technology Data Exchange (ETDEWEB)

Sun, Jiayi; Jeffryes, James G.; Henry, Christopher S.; Bruner, Steven D.; Hanson, Andrew D.

2017-11-01

The necessarily sharp focus of metabolic engineering and metabolic synthetic biology on pathways and their fluxes has tended to divert attention from the damaging enzymatic and chemical side-reactions that pathway metabolites can undergo. Although historically overlooked and underappreciated, such metabolite damage reactions are now known to occur throughout metabolism and to generate (formerly enigmatic) peaks detected in metabolomics datasets. It is also now known that metabolite damage is often countered by dedicated repair enzymes that undo or prevent it. Metabolite damage and repair are highly relevant to engineered pathway design: metabolite damage reactions can reduce flux rates and product yields, and repair enzymes can provide robust, host-independent solutions. Herein, after introducing the core principles of metabolite damage and repair, we use case histories to document how damage and repair processes affect efficient operation of engineered pathways - particularly those that are heterologous, non-natural, or cell-free. We then review how metabolite damage reactions can be predicted, how repair reactions can be prospected, and how metabolite damage and repair can be built into genome-scale metabolic models. Lastly, we propose a versatile 'plug and play' set of well-characterized metabolite repair enzymes to solve metabolite damage problems known or likely to occur in metabolic engineering and synthetic biology projects.

Lenalidomide for the Treatment of Low- or Intermediate-1-Risk Myelodysplastic Syndromes Associated with Deletion 5q Cytogenetic Abnormality: An Evidence Review of the NICE Submission from Celgene

NARCIS (Netherlands)

H.M. Blommestein (Hedwig); N. Armstrong (Nigel); S. Ryder; S. Deshpande (Sohan); G. Worthy (Gill); C. Noake; R. Riemsma (Rob); J. Kleijnen (Jos); J.L. Severens (Hans); M.J. Al (Maiwenn)

2016-01-01

textabstractThe National Institute for Health and Care Excellence (NICE) invited the manufacturer of lenalidomide (Celgene) to submit evidence of the clinical and cost effectiveness of the drug for treating adults with myelodysplastic syndromes (MDS) associated with deletion 5q cytogenetic

embracing the future of engineering education in nigeria

African Journals Online (AJOL)

HOD

Nigerian engineering teaching style and outputs, some of the challenges being faced by engineering education in. Nigeria .... feelings and reactions of the students in this situation ...... new century," Chemical Engineering Education, vol. 34, pp ...

Process gas generator feeding internal combustion piston engines

Energy Technology Data Exchange (ETDEWEB)

Iwantscheff, G; Kostka, H; Henkel, H J

1978-10-26

The invention relates to a process gas generator feeding gaseous fuel to internal combustion piston engines. The cylinder linings of the internal combustion engine are enclosed by the catalytic reaction chamber of the process gas generator which contains perforated sintered nozzle bricks as carriers of the catalysts needed for the conversion. The reaction chamber is surrounded by the exhaust gas chamber around which a tube coil is ound which feeds the fuel charge to the reaction chamber after evaporation and mixing with exhaust gas and air. The fuel which may be used for this purpose, e.g., is low-octane gasoline or diesel fuel. In the reaction chamber the fuel is catalytically converted at temperatures above 200/sup 0/C, e.g., into low-molecular paraffins, carbon monoxide and hydrogen. Operation of the internal combustion engine with a process gas generator greatly reduces the pollutant content of the exhaust gases.

Advancing intercultural competency: Canadian engineering employers' experiences with immigrant engineers

Science.gov (United States)

Friesen, Marcia; Ingram, Sandra

2013-05-01

This paper explores Canadian engineering employers' perceptions of and experiences with internationally educated engineers (recent immigrants to Canada) employed in their organisations for varying lengths of time. Qualitative data were collected from employers using focus group methodology. Findings reflected employers' observations of culturally different behaviours and characteristics in their internationally educated employees, employers' reactions to cultural differences ranging from negative attributions to tolerance, and the implementation of largely ad hoc intra-organisational strategies for managing cultural differences in employer-employee relationships. Findings exposed the lack of corporate intercultural competency in the Canadian engineering profession. Equity and gatekeeping implications are discussed.

Efficiency of Energy Transduction in a Molecular Chemical Engine

OpenAIRE

Sasaki, Kazuo; Kanada, Ryo; Amari, Satoshi

2006-01-01

A simple model of the two-state ratchet type is proposed for molecular chemical engines that convert chemical free energy into mechanical work and vice versa. The engine works by catalyzing a chemical reaction and turning a rotor. Analytical expressions are obtained for the dependences of rotation and reaction rates on the concentrations of reactant and product molecules, from which the performance of the engine is analyzed. In particular, the efficiency of energy transduction is discussed in...

The Impact of Cloud Properties on Young Sea Ice during Three Winter Storms at N-ICE2015

Science.gov (United States)

Murphy, S. Y.; Walden, V. P.; Cohen, L.; Hudson, S. R.

2017-12-01

The impact of clouds on sea ice varies significantly as cloud properties change. Instruments deployed during the Norwegian Young Sea Ice field campaign (N-ICE2015) are used to study how differing cloud properties influence the cloud radiative forcing at the sea ice surface. N-ICE2015 was the first campaign in the Arctic winter since SHEBA (1997/1998) to study the surface energy budget of sea ice and the associated effects of cloud properties. Cloud characteristics, surface radiative and turbulent fluxes, and meteorological properties were measured throughout the field campaign. Here we explore how cloud macrophysical and microphysical properties affect young, thin sea ice during three winter storms from 31 January to 15 February 2015. This time period is of interest due to the varying surface and atmospheric conditions, which showcase the variety of conditions the newly-formed sea ice can experience during the winter. This period was characterized by large variations in the ice surface and near-surface air temperatures, with highs near 0°C when warm, moist air was advected into the area and lows reaching -40°C during clear, calm periods between storms. The advection of warm, moist air into the area influenced the cloud properties and enhanced the downwelling longwave flux. For most of the period, downwelling longwave flux correlates closely with the air temperature. However, at the end of the first storm, a drop in downwelling longwave flux of about 50 Wm-2 was observed, independent of any change in surface or air temperature or cloud fraction, indicating a change in cloud properties. Lidar data show an increase in cloud height during this period and a potential shift in cloud phase from ice to mixed-phase. This study will describe the cloud properties during the three winter storms and discuss their impacts on surface energy budget.

Three-Dimensional Numerical Analysis of LOX/Kerosene Engine Exhaust Plume Flow Field Characteristics

Directory of Open Access Journals (Sweden)

Hong-hua Cai

2017-01-01

Full Text Available Aiming at calculating and studying the flow field characteristics of engine exhaust plume and comparative analyzing the effects of different chemical reaction mechanisms on the engine exhaust plume flow field characteristics, a method considering fully the combustion state influence is put forward, which is applied to exhaust plume flow field calculation of multinozzle engine. On this basis, a three-dimensional numerical analysis of the effects of different chemical reaction mechanisms on LOX/kerosene engine exhaust plume flow field characteristics was carried out. It is found that multistep chemical reaction can accurately describe the combustion process in the LOX/kerosene engine, the average chamber pressure from the calculation is 4.63% greater than that of the test, and the average chamber temperature from the calculation is 3.34% greater than that from the thermodynamic calculation. The exhaust plumes of single nozzle and double nozzle calculated using the global chemical reaction are longer than those using the multistep chemical reaction; the highest temperature and the highest velocity on the plume axis calculated using the former are greater than that using the latter. The important influence of chemical reaction mechanism must be considered in the study of the fixing structure of double nozzle engine on the rocket body.

Reaction and catalyst engineering to exploit kinetically controlled whole-cell multistep biocatalysis for terminal FAME oxyfunctionalization.

Science.gov (United States)

Schrewe, Manfred; Julsing, Mattijs K; Lange, Kerstin; Czarnotta, Eik; Schmid, Andreas; Bühler, Bruno

2014-09-01

The oxyfunctionalization of unactivated C−H bonds can selectively and efficiently be catalyzed by oxygenase-containing whole-cell biocatalysts. Recombinant Escherichia coli W3110 containing the alkane monooxygenase AlkBGT and the outer membrane protein AlkL from Pseudomonas putida GPo1 have been shown to efficiently catalyze the terminal oxyfunctionalization of renewable fatty acid methyl esters yielding bifunctional products of interest for polymer synthesis. In this study, AlkBGTL-containing E. coli W3110 is shown to catalyze the multistep conversion of dodecanoic acid methyl ester (DAME) via terminal alcohol and aldehyde to the acid, exhibiting Michaelis-Menten-type kinetics for each reaction step. In two-liquid phase biotransformations, the product formation pattern was found to be controlled by DAME availability. Supplying DAME as bulk organic phase led to accumulation of the terminal alcohol as the predominant product. Limiting DAME availability via application of bis(2-ethylhexyl)phthalate (BEHP) as organic carrier solvent enabled almost exclusive acid accumulation. Furthermore, utilization of BEHP enhanced catalyst stability by reducing toxic effects of substrate and products. A further shift towards the overoxidized products was achieved by co-expression of the gene encoding the alcohol dehydrogenase AlkJ, which was shown to catalyze efficient and irreversible alcohol to aldehyde oxidation in vivo. With DAME as organic phase, the aldehyde accumulated as main product using resting cells containing AlkBGT, AlkL, as well as AlkJ. This study highlights the versatility of whole-cell biocatalysis for synthesis of industrially relevant bifunctional building blocks and demonstrates how integrated reaction and catalyst engineering can be implemented to control product formation patterns in biocatalytic multistep reactions. © 2014 Wiley Periodicals, Inc.

Engineering of Biocatalysts and Biocatalytic Processes

DEFF Research Database (Denmark)

Lima Ramos, Joana; Lima Afonso Neto, Watson; Woodley, John

2014-01-01

Discovering and developing new biocatalytic reactions and biocatalysts has been the major focus of the activities in the EC FP7 BIOTRAINS network. However, industrial implementation of these new reactions requires engineering of both the biocatalysts and the associated processes, to achieve...... the necessary targets for economic and sustainable feasibility of full-scale processes. The possible engineering solutions can most rapidly be identified using a series of tools and in this article we will describe some of these as well as giving a perspective on the future of this important element of process...

Model photo reaction centers via genetic engineering

Energy Technology Data Exchange (ETDEWEB)

Zhiyu Wang; DiMagno, T.J.; Popov, M.; Norris, J.R. [Argonne National Lab., IL (United States)]|[Chicago Univ., IL (United States). Dept. of Chemistry; Chikin Chan; Fleming, G. [Chicago Univ., IL (United States). Dept. of Chemistry; Jau Tang; Hanson, D.; Schiffer, M. [Argonne National Lab., IL (United States)

1992-12-31

A series of reaction centers of Rhodococcus capsulatus isolated from a set of mutated organisms modified by site-directed mutagenesis at residues M208 and L181 are described. Changes in the amino acid at these sites affect both the energetics of the systems as well as the chemical kinetics for the initial ET event. Two empirical relations among the different mutants for the reduction potential and the ET rate are presented.

Model photo reaction centers via genetic engineering

Energy Technology Data Exchange (ETDEWEB)

Zhiyu Wang; DiMagno, T.J.; Popov, M.; Norris, J.R. (Argonne National Lab., IL (United States) Chicago Univ., IL (United States). Dept. of Chemistry); Chikin Chan; Fleming, G. (Chicago Univ., IL (United States). Dept. of Chemistry); Jau Tang; Hanson, D.; Schiffer, M. (Argonne National Lab., IL (United States))

1992-01-01

A series of reaction centers of Rhodococcus capsulatus isolated from a set of mutated organisms modified by site-directed mutagenesis at residues M208 and L181 are described. Changes in the amino acid at these sites affect both the energetics of the systems as well as the chemical kinetics for the initial ET event. Two empirical relations among the different mutants for the reduction potential and the ET rate are presented.

Current UK dental sedation practice and the 'National Institute for Health and Care Excellence' (NICE) guideline 112: sedation in children and young people.

Science.gov (United States)

Coulthard, P; Craig, D; Holden, C; Robb, N D; Sury, M; Chopra, S; Holroyd, I

2015-04-24

Describe current dental sedation practice for under 19-year-olds in the UK and compare it with the recommendations of NICE guidance 112. Members of the Society for the Advancement of Anaesthesia in Dentistry and members of the Dental Sedation Teachers Group were invited to participate in an online survey. Two hundred and sixty-six dentists and doctors completed the survey. Eighty-two percent were operator and sedationist (operator-sedationist). Ninety-five percent provided written information and 94% obtained written consent. Eighty-four percent kept a written or electronic sedation record. Eighty-six percent complied with life support training expectations. Eighty-six percent had immediate access to resuscitation equipment. Sixty-seven percent of sedationists reported that treatment could not be completed under sedation for sedation was unsuccessful, 61% said they would schedule general anaesthesia and 54.5% would schedule advanced sedation care. Forty-nine percent believed that a dentist was an appropriate person to provide advanced sedation for 12-18 years. Only 24% thought a dentist should provide advanced sedation for childrensedation was thought to be primary care by 33% and secondary care by 68%. We found good agreement between the current practice of sedation and the recommendations of the NICE guidance 112.

Atoms diffusion-induced phase engineering of platinum-gold alloy nanocrystals with high electrocatalytic performance for the formic acid oxidation reaction.

Science.gov (United States)

Li, Fu-Min; Kang, Yong-Qiang; Liu, Hui-Min; Zhai, Ya-Nan; Hu, Man-Cheng; Chen, Yu

2018-03-15

Bimetallic noble metal nanocrystals have been widely applied in many fields, which generally are synthesized by the wet-chemistry reduction method. This work presents a purposely designed atoms diffusion induced phase engineering of PtAu alloy nanocrystals on platy Au substrate (PtAu-on-Au nanostructures) through simple hydrothermal treatment. Benefitting from the synergistic effects of component and structure, PtAu-on-Au nanostructures remarkably enhance the dehydrogenation pathway of the formic acid oxidation reaction (FAOR), and thus exhibit much higher FAOR activity and durability compared with Pt nanocrystals on platy Au substrate (Pt-on-Au nanostructures) and commercial Pd black due to an excellent stability of platy Au substrate and a high oxidation resistance of PtAu alloy nanocrystals. The atoms diffusion-induced phase engineering demonstrated in this work builds a bridge between the traditional metallurgy and modern nanotechnologies, which also provides some useful insights in developing noble metals based alloyed nanostructures for the energy and environmental applications. Copyright © 2017 Elsevier Inc. All rights reserved.

Dynamics of the Ross-Stirling engine

Energy Technology Data Exchange (ETDEWEB)

Doige, A G; Walker, G

1986-01-01

A computer model has been developed for the simulation of the dynamic loading in a Stirling engine having a Ross linkage as the drive mechanism. The model is based on a complete theoretical formulation of the dynamics of the system. The masses and moments of inertia of all moving components have been included in the model. The computer program can be used for determining the effect of changes in many design parameters on the geometry, velocities, accelerations, dynamic loading and reactions at all pin connections and engine-mount locations. In this paper, emphasis is given to assessing the general characteristics of the reaction forces at the pin connections and to the reduction of overall engine shaking forces by simple balancing methods. The most heavily loaded element in the engine is the pin connecting the crank and the yoke. The force at that location is a combination of a static load produced by gas pressure in the cylinders and a combined inertia load for the whole engine which increases with the square of the rotational speed. 6 refs., 12 figs., 2 tabs.

For information: A Series of Seminars about NICE Environment during May / June 2004

CERN Multimedia

2004-01-01

Recently deployed at CERN, Windows XP and Office 2003 offer new functionalities. IT/IS Group has prepared a series of seminars to both introduce the CERN NICE environment to beginners and also to show how to benefit from the advanced features offered by the new versions of Windows and Office. Particular attention will be paid to Collaborative Tasks, like reviewing a document, planning a meeting and to Mobile Computing like working offline, remotely accessing CERN resources, etc.. Seminars planned this week are: Editer des sites Web avec Frontpage 2003 (FR), Tuesday 1st of June, 14:30. Créer des documents bureautiques avec Windows Word 2003 et Excel 2003 (FR), Thursday 3rd of June, 14:30. The seminars will take place in the IT Auditorium (bldg. 31, 3-005) and last for about one hour plus questions. No registration is necessary. More information is available at http://cern.ch/Win/Seminars/Tutorials. Interested users can also have a look to courses offered by CERN Technical Training, at http://cern.ch/humanr...

FOR INFORMATION - A Series of Seminars about NICE Environment during May / June 2004

CERN Multimedia

IT Department

2004-01-01

Recently deployed at CERN, Windows XP and Office 2003 offer new functionalities. IT/IS Group has prepared a series of seminars to both introduce the CERN NICE environment to beginners and also to show how to benefit from the advanced features offered by the new versions of Windows and Office. Particular attention will be paid to Collaborative Tasks, like reviewing a document, planning a meeting and to Mobile Computing like working offline, remotely accessing CERN resources, etc.. The topics and the dates are as follows: - Windows XP, une nouvelle experience (FR), Tuesday, 11th May 2004, 14.30 hrs. - Windows XP: a new experience (EN), Tuesday 8th of June, 14:30. - Lire votre email et plus avec Outlook 2003 (FR), Thursday 27th of May, 14:30. - Read your mail and more with Outlook 2003 (EN), Thursday 10th of June, 14:30. - Creer des documents Office avec Windows Word 2003 et Excel 2003 (FR), Thursday 3rd of June, 14:30. - Make Office documents with Windows Word 2003 and Excel 2003 (EN), Thursday 17th of June, 1...

For information: A Series of Seminars about NICE Environment during May / June 2004

CERN Multimedia

2004-01-01

Recently deployed at CERN, Windows XP and Office 2003 offer new functionalities. IT/IS Group has prepared a series of seminars to both introduce the CERN NICE environment to beginners and also to show how to benefit from the advanced features offered by the new versions of Windows and Office. Particular attention will be paid to Collaborative Tasks, like reviewing a document, planning a meeting and to Mobile Computing like working offline, remotely accessing CERN resources, etc.. Seminars planned for these weeks are : Windows XP: a new experience (EN), Tuesday 8th of June, 14:30. Read your mail and more with Outlook 2003 (EN), Thursday 10th of June, 14:30. The seminars will take place in the IT Amphitheatre (bldg. 31, 3-005) and last for about one hour plus questions. No registration is necessary. More information is available at http://cern.ch/Win/Seminars/Tutorials. Interested users can also have a look to courses offered by CERN Technical Training, at http://cern.ch/humanresources/external/training/tec...

For Information: A Series of Seminars about NICE Environment during May / June 2004

CERN Multimedia

IT Department

2004-01-01

Recently deployed at CERN, Windows XP and Office 2003 offer new functionalities. IT/IS Group has prepared a series of seminars to both introduce the CERN NICE environment to beginners and also to show how to benefit from the advanced features offered by the new versions of Windows and Office. Particular attention will be paid to Collaborative Tasks, like reviewing a document, planning a meeting and to Mobile Computing like working offline, remotely accessing CERN resources, etc.. Seminars for planned these week are : Editing Web Sites with Frontpage 2003 (EN), Tuesday 25th of May, 14:30. Lire votre email et plus avec Outlook 2003 (FR), Thursday 27th of May, 14:30. The seminars will take place in the IT Amphitheatre (bldg. 31, 3-005) and last for about one hour plus questions. No registration is necessary. More information is available at http://cern.ch/Win/Seminars/Tutorials Interested users can also have a look to courses offered by CERN Technical Training, at http://cern.ch/humanresources/external/train...

Contributions from the Department of Wind Energy and Atmospheric Physics to EWEC `99 in Nice, France

Energy Technology Data Exchange (ETDEWEB)

Larsen, Gunner C; Westermann, Kirsten; Noergaard, Per [eds.

1999-03-01

The first conference following the merger of the series of European Union Wind Energy Conference and the European Wind Energy Conferences - EWEC`99 - was held in Nice, France during the period 1-5 March 1999. About 600 delegates, mainly from Europe but also from other parts of the world, attended the conference. The conference contributions included 96 oral presentations and 305 posters. The Department of Wind Energy and Atmospheric Physics contributed with 29 oral presentations and 36 posters with members of the department as authors or co-authors. The present report contains the set of these papers available at the deadline 19 March 1999. The contributions cover a wide spectrum of subjects including wind resources, aerodynamics, reliability and load assessment, grid connection, measurement methods, innovative wind turbines and market aspects. (au)

Incipient Soot Formation in Rich Partially Premixed Flames under High Pressure Conditions of Relevance to Compression-Ignition Engines

Science.gov (United States)

2017-09-09

a Laminar Premixed Flame, Aerosol Reaction Engineering , Center for Aerosol science and Engineering (CASE) Workshop 2016, Saint Louis, Missouri, May...Publication Type: Conference Paper or Presentation Conference Name: Aerosol Reaction Engineering , Center for Aerosol science and Engineering (CASE...measurements of critical soot precursors up to 3-ring aromatics is available online to modelers to improve the chemical reaction mechanism [24]. To give a

Issues Related to the Frequency of Exploratory Analyses by Evidence Review Groups in the NICE Single Technology Appraisal Process.

Science.gov (United States)

Kaltenthaler, Eva; Carroll, Christopher; Hill-McManus, Daniel; Scope, Alison; Holmes, Michael; Rice, Stephen; Rose, Micah; Tappenden, Paul; Woolacott, Nerys

2017-06-01

Evidence Review Groups (ERGs) critically appraise company submissions as part of the National Institute for Health and Care Excellence (NICE) Single Technology Appraisal (STA) process. As part of their critique of the evidence submitted by companies, the ERGs undertake exploratory analyses to explore uncertainties in the company's model. The aim of this study was to explore pre-defined factors that might influence or predict the extent of ERG exploratory analyses. The aim of this study was to explore predefined factors that might influence or predict the extent of ERG exploratory analyses. We undertook content analysis of over 400 documents, including ERG reports and related documentation for the 100 most recent STAs (2009-2014) for which guidance has been published. Relevant data were extracted from the documents and narrative synthesis was used to summarise the extracted data. All data were extracted and checked by two researchers. Forty different companies submitted documents as part of the NICE STA process. The most common disease area covered by the STAs was cancer (44%), and most ERG reports (n = 93) contained at least one exploratory analysis. The incidence and frequency of ERG exploratory analyses does not appear to be related to any developments in the appraisal process, the disease area covered by the STA, or the company's base-case incremental cost-effectiveness ratio (ICER). However, there does appear to be a pattern in the mean number of analyses conducted by particular ERGs, but the reasons for this are unclear and potentially complex. No clear patterns were identified regarding the presence or frequency of exploratory analyses, apart from the mean number conducted by individual ERGs. More research is needed to understand this relationship.

Quick Reaction Evaluation of Materials and Processes. Delivery Order 0011: Engineering Properties, Fatigue, and Crack Growth Data on SCS-6/Ti-6Al-4V Titanium Matrix Composite (16 Ply) Panels

Science.gov (United States)

2009-05-01

tabs were bonded to the specimen using a TIG welding process to ensure adhesion of the tabs throughout the experiment. The shear specimens and the...AFRL-RX-WP-TR-2010-4175 QUICK REACTION EVALUATION OF MATERIALS AND PROCESSES Delivery Order 0011: Engineering Properties, Fatigue, and Crack...From - To) May 2009 Final 03 April 2006 – 29 May 2009 4. TITLE AND SUBTITLE QUICK REACTION EVALUATION OF MATERIALS AND PROCESSES Delivery Order

Asian collaboration on nuclear reaction data compilation

International Nuclear Information System (INIS)

Aikawa, Masayuki; Furutachi, Naoya; Kato, Kiyoshi; Makinaga, Ayano; Devi, Vidya; Ichinkhorloo, Dagvadorj; Odsuren, Myagmarjav; Tsubakihara, Kohsuke; Katayama, Toshiyuki; Otuka, Naohiko

2013-01-01

Nuclear reaction data are essential for research and development in nuclear engineering, radiation therapy, nuclear physics and astrophysics. Experimental data must be compiled in a database and be accessible to nuclear data users. One of the nuclear reaction databases is the EXFOR database maintained by the International Network of Nuclear Reaction Data Centres (NRDC) under the auspices of the International Atomic Energy Agency. Recently, collaboration among the Asian NRDC members is being further developed under the support of the Asia-Africa Science Platform Program of the Japan Society for the Promotion of Science. We report the activity for three years to develop the Asian collaboration on nuclear reaction data compilation. (author)

Implementing the NICE osteoarthritis guidelines: a mixed methods study and cluster randomised trial of a model osteoarthritis consultation in primary care--the Management of OsteoArthritis In Consultations (MOSAICS) study protocol.

Science.gov (United States)

Dziedzic, Krysia S; Healey, Emma L; Porcheret, Mark; Ong, Bie Nio; Main, Chris J; Jordan, Kelvin P; Lewis, Martyn; Edwards, John J; Jinks, Clare; Morden, Andrew; McHugh, Gretl A; Ryan, Sarah; Finney, Andrew; Jowett, Sue; Oppong, Raymond; Afolabi, Ebenezer; Pushpa-Rajah, Angela; Handy, June; Clarkson, Kris; Mason, Elizabeth; Whitehurst, Tracy; Hughes, Rhian W; Croft, Peter R; Hay, Elaine M

2014-08-27

There is as yet no evidence on the feasibility of implementing recommendations from the National Institute of Health and Care Excellence (NICE) osteoarthritis (OA) guidelines in primary care, or of the effect these recommendations have on the condition. The primary aim of this study is to determine the clinical and cost effectiveness of a model OA consultation (MOAC), implementing the core recommendations from the NICE OA guidelines in primary care. Secondary aims are to investigate the impact, feasibility and acceptability of the MOAC intervention; to develop and evaluate a training package for management of OA by general practitioners (GPs) and practice nurses; test the feasibility of deriving 'quality markers' of OA management using a new consultation template and medical record review; and describe the uptake of core NICE OA recommendations in participants aged 45 years and over with joint pain. A mixed methods study with a nested cluster randomised controlled trial. This study was developed according to a defined theoretical framework (the Whole System Informing Self-management Engagement). An overarching model (the Normalisation Process Theory) will be employed to undertake a comprehensive 'whole-system' evaluation of the processes and outcomes of implementing the MOAC intervention. The primary outcome is general physical health (Short Form-12 Physical component score [PCS]) (Ware 1996). The impact, acceptability and feasibility of the MOAC intervention at practice level will be assessed by comparing intervention and control practices using a Quality Indicators template and medical record review. Impact and acceptability of the intervention for patients will be assessed via self-completed outcome measures and semi-structured interviews. The impact, acceptability and feasibility of the MOAC intervention and training for GPs and practice nurses will be evaluated using a variety of methods including questionnaires, semi-structured interviews, and observations

Interaction of measles virus vectors with Auger electron emitting radioisotopes

International Nuclear Information System (INIS)

Dingli, David; Peng, K.-W.; Harvey, Mary E.; Vongpunsawad, Sompong; Bergert, Elizabeth R.; Kyle, Robert A.; Cattaneo, Roberto; Morris, John C.; Russell, Stephen J.

2005-01-01

A recombinant measles virus (MV) expressing the sodium iodide symporter (NIS) is being considered for therapy of advanced multiple myeloma. Auger electrons selectively damage cells in which the isotope decays. We hypothesized that the Auger electron emitting isotope 125 I can be used to control viral proliferation. MV was engineered to express both carcinoembryonic antigen and NIS (MV-NICE). Cells were infected with MV-NICE and exposed to 125 I with appropriate controls. MV-NICE replication in vitro is inhibited by the selective uptake of 125 I by cells expressing NIS. Auger electron damage is partly mediated by free radicals and abrogated by glutathione. In myeloma xenografts, control of MV-NICE with 125 I was not possible under the conditions of the experiment. MV-NICE does not replicate faster in the presence of radiation. Auger electron emitting isotopes effectively stop propagation of MV vectors expressing NIS in vitro. Additional work is necessary to translate these observations in vivo

The future of nuclear engineering

International Nuclear Information System (INIS)

Beeden, Jeffrey

2003-01-01

Today, nuclear power refers to the splitting of large uranium atoms into smaller atoms with a net release of energy. Tomorrow, nuclear power will refer to the combining of hydrogen into larger atoms with a net release of energy. Nuclear power's future is fusion. The Mechanical Engineers of tomorrow will need to be familiar with the process of creating and harnessing the energy from a fusion reaction. During the oil shortage in the 1970's, America scrambled to initiate alternative methods of producing power. Nuclear fusion was one of them. As time passes, the solution to the world's energy crisis presses the countries of the world to find alternative forms of energy; nuclear fusion may contain the answer. In the near future, the field of fusion will open up and a new wave of engineers will flood into this field. Mechanical engineers will lead the way with advances in materials, computational fluid dynamics, finite element analysis for thermal and structural systems, and heat transfer designs to optimize nuclear fusion reactors and power plants. All this effort is in anticipation of creating a sustained fusion reaction that can generate enough heat to transfer to steam in order to generate electric power to sustain the fusion reaction and introduce power to the grid. (author)

Factors controlling the redox potential of ZnCe6 in an engineered bacterioferritin photochemical 'reaction centre'.

Science.gov (United States)

Mahboob, Abdullah; Vassiliev, Serguei; Poddutoori, Prashanth K; van der Est, Art; Bruce, Doug

2013-01-01

Photosystem II (PSII) of photosynthesis has the unique ability to photochemically oxidize water. Recently an engineered bacterioferritin photochemical 'reaction centre' (BFR-RC) using a zinc chlorin pigment (ZnCe6) in place of its native heme has been shown to photo-oxidize bound manganese ions through a tyrosine residue, thus mimicking two of the key reactions on the electron donor side of PSII. To understand the mechanism of tyrosine oxidation in BFR-RCs, and explore the possibility of water oxidation in such a system we have built an atomic-level model of the BFR-RC using ONIOM methodology. We studied the influence of axial ligands and carboxyl groups on the oxidation potential of ZnCe6 using DFT theory, and finally calculated the shift of the redox potential of ZnCe6 in the BFR-RC protein using the multi-conformational molecular mechanics-Poisson-Boltzmann approach. According to our calculations, the redox potential for the first oxidation of ZnCe6 in the BRF-RC protein is only 0.57 V, too low to oxidize tyrosine. We suggest that the observed tyrosine oxidation in BRF-RC could be driven by the ZnCe6 di-cation. In order to increase the efficiency of tyrosine oxidation, and ultimately oxidize water, the first potential of ZnCe6 would have to attain a value in excess of 0.8 V. We discuss the possibilities for modifying the BFR-RC to achieve this goal.

QRTEngine: An easy solution for running online reaction time experiments using Qualtrics.

Science.gov (United States)

Barnhoorn, Jonathan S; Haasnoot, Erwin; Bocanegra, Bruno R; van Steenbergen, Henk

2015-12-01

Performing online behavioral research is gaining increased popularity among researchers in psychological and cognitive science. However, the currently available methods for conducting online reaction time experiments are often complicated and typically require advanced technical skills. In this article, we introduce the Qualtrics Reaction Time Engine (QRTEngine), an open-source JavaScript engine that can be embedded in the online survey development environment Qualtrics. The QRTEngine can be used to easily develop browser-based online reaction time experiments with accurate timing within current browser capabilities, and it requires only minimal programming skills. After introducing the QRTEngine, we briefly discuss how to create and distribute a Stroop task. Next, we describe a study in which we investigated the timing accuracy of the engine under different processor loads using external chronometry. Finally, we show that the QRTEngine can be used to reproduce classic behavioral effects in three reaction time paradigms: a Stroop task, an attentional blink task, and a masked-priming task. These findings demonstrate that QRTEngine can be used as a tool for conducting online behavioral research even when this requires accurate stimulus presentation times.

Ponatinib for Treating Chronic Myeloid Leukaemia: An Evidence Review Group Perspective of a NICE Single Technology Appraisal.

Science.gov (United States)

Pandor, Abdullah; Stevenson, Matt; Stevens, John; James, Marrissa Martyn-St; Hamilton, Jean; Byrne, Jenny; Rudin, Claudius; Rawdin, Andrew; Wong, Ruth

2018-02-26

As part of its single technology appraisal process, the National Institute for Health and Care Excellence (NICE) invited the company that manufactures ponatinib (Inclusig ® ; Incyte Corporation) to submit evidence for the clinical and cost effectiveness for previously treated chronic myeloid leukaemia (CML) and Philadelphia-chromosome-positive acute lymphoblastic leukaemia (Ph+ ALL). This paper focusses on the three phases of CML: the chronic phase (CP), the accelerated phase (AP) and the blast crisis phase (BP). The School of Health and Related Research Technology Appraisal Group at the University of Sheffield was commissioned to act as the independent Evidence Review Group (ERG). This article presents the critical review of the company's submission by the ERG and the outcome of the NICE guidance. Clinical evidence for ponatinib was derived from a phase II, industry-sponsored, single-arm, open-label, multicentre, non-comparative study. Despite the limited evidence and potential for biases, this study demonstrated that ponatinib was likely to be an effective treatment (in terms of major cytogenetic response and major haematological response) with an acceptable safety profile for patients with CML. Given the absence of any head-to-head studies comparing ponatinib with other relevant comparators, the company undertook a matching-adjusted indirect comparison (MAIC) of ponatinib with bosutinib. The approach was only used for patients with CP-CML because comprehensive data were not available for the AP- or BP-CML groups to allow the matching technique to be used. Despite the uncertainty about the MAIC approach, ponatinib was considered likely to offer advantages over bosutinib in the third-line setting, particularly for complete cytogenetic response. The company developed two health economic models to assess the cost effectiveness of ponatinib for the treatment of patients in CP-CML or in advanced CML (AP- or BP-CML, which were modelled separately). The company did

HAS Should Not Be NICE: Rejecting Imaginary Worlds in the French Technology Assessment Guidelines

Directory of Open Access Journals (Sweden)

Paul C Langley

2017-01-01

Full Text Available Pricing decisions and access to pharmaceuticals should be evidence based. Unfortunately, the French guidelines for technology assessment, in their adoption of the National Institute for Health and Clinical Excellence (NICE reference case modeling standard ensure that this is not the case. Rather than requiring the submission of claims that are credible, evaluable and replicable, the Haute Autorité de Sante (HAS mandates the creation of imaginary worlds to support comparative effectiveness and cost-outcome claims. The purpose of this commentary is to make the case that HAS should reconsider this commitment to standards for health technology assessment that are more appropriately seen as pseudoscience. The recommendation is that HAS should put to one side mandating lifetime cost-per-quality adjusted life year (QALY or life years saved claims in favor of short-term claims that can be evaluated and reported to health system decision makers as part of a provisional assessment of new products as well as supporting ongoing disease area and therapeutic class reviews.   Type: Commentary

Pulsed fission/fusion hybrid engines

International Nuclear Information System (INIS)

Hudson, G.C.

1979-01-01

Research into high-thrust, high-specific impulse rocket engines using energy from nuclear reactions which has been conducted at this organization will be discussed. The engines are all conceptual in nature, yet are within the realization of conventional or near-term technology. The engine concepts under study at Foundation, Inc. are designed to obviate or minimize these negative effects of the ORION scheme. By using non-chemical triggers to initiate a non-breakeven fusion reaction at the core of a target composed of both fission and fusion fuel, it should be possible to employ the fusion neutrons thus produced to begin a fission reaction in U-235 or Pu-239. Since the density of the target can be increased by as much as a factor of 250 through compression of the pellet, the amount of fission material necessary to produce a critical mass can be greatly reduced. (This also means that the amount of fission products produced for a giventhrust level is also reduced from the ORION levels.) Coupling this eeffect to the large number of 14 MeV fusion neutrons produced early in the compression process and subsequently to the heating of some additional fusion fuel surrounding the critical mass leads to the very efficient burnup of the target. This insures both high yield from the target as well as low cost per MJ energy released. Finally, the use of such small pellets allows the scale of the energy released to be tailored to a level usable in rocket engines of a few tens of tons thrust level. (orig.) [de

Societal views on NICE, cancer drugs fund and value-based pricing criteria for prioritising medicines: a cross-sectional survey of 4118 adults in Great Britain.

Science.gov (United States)

Linley, Warren G; Hughes, Dyfrig A

2013-08-01

The criteria used by the National Institute for Health and Clinical Excellence (NICE) for accepting higher incremental cost-effectiveness ratios for some medicines over others, and the recent introduction of the Cancer Drugs Fund (CDF) in England, are assumed to reflect societal preferences for National Health Service resource allocation. Robust empirical evidence to this effect is lacking. To explore societal preferences for these and other criteria, including those proposed for rewarding new medicines under the future value-based pricing (VBP) system, we conducted a choice-based experiment in 4118 UK adults via web-based surveys. Preferences were determined by asking respondents to allocate fixed funds between different patient and disease types reflecting nine specific prioritisation criteria. Respondents supported the criteria proposed under the VBP system (for severe diseases, address unmet needs, are innovative--provided they offered substantial health benefits, and have wider societal benefits) but did not support the end-of-life premium or the prioritisation of children or disadvantaged populations as specified by NICE, nor the special funding status for treatments of rare diseases, nor the CDF. Policies introduced on the basis of perceived--and not actual--societal values may lead to inappropriate resource allocation decisions with the potential for significant population health and economic consequences. Copyright © 2012 John Wiley & Sons, Ltd.

A Reaction Database for Small Molecule Pharmaceutical Processes Integrated with Process Information

DEFF Research Database (Denmark)

Papadakis, Emmanouil; Anantpinijwatna, Amata; Woodley, John

2017-01-01

This article describes the development of a reaction database with the objective to collect data for multiphase reactions involved in small molecule pharmaceutical processes with a search engine to retrieve necessary data in investigations of reaction-separation schemes, such as the role of organic......; compounds participating in the reaction; use of organic solvents and their function; information for single step and multistep reactions; target products; reaction conditions and reaction data. Information for reactor scale-up together with information for the separation and other relevant information...

Quantum Chemical Approach to Estimating the Thermodynamics of Metabolic Reactions

OpenAIRE

Adrian Jinich; Dmitrij Rappoport; Ian Dunn; Benjamin Sanchez-Lengeling; Roberto Olivares-Amaya; Elad Noor; Arren Bar Even; Alán Aspuru-Guzik

2014-01-01

Thermodynamics plays an increasingly important role in modeling and engineering metabolism. We present the first nonempirical computational method for estimating standard Gibbs reaction energies of metabolic reactions based on quantum chemistry, which can help fill in the gaps in the existing thermodynamic data. When applied to a test set of reactions from core metabolism, the quantum chemical approach is comparable in accuracy to group contribution methods for isomerization and group transfe...

Dynamics of {sup 58}Ni + {sup 54}Fe → {sup 112}Xe* reaction across the Coulomb barrier

Energy Technology Data Exchange (ETDEWEB)

Kaur, Manpreet; Sharma, Manoj K. [Thapar University, School of Physics and Materials Science, Patiala (India)

2014-03-15

The dynamical cluster-decay model (DCM) has been applied to study the decay of the {sup 112}Xe* compound nucleus formed in the massive heavy-ion reaction {sup 58}Ni + {sup 54}Fe at energies across the Coulomb barrier with E{sub c.m.} ∼ 85-110 MeV. The calculations are done for spherical fragmentation as well as by including deformation and orientation degrees of freedom of the decaying fragments. DCM-based cross sections give a nice description of the experimental fusion excitation function σ{sub ER}, within one parameter fitting, the neck length parameter (ΔR), whose value remains within the range of nuclear proximity interaction. The barrier height corresponding to the neck length parameter brings into the picture the barrier modification which enables us to address the data particularly at below barrier energies. The role of excitation energy (or temperature), deformations, orientations, angular momentum and diffuseness parameter is investigated to understand the dynamics of the {sup 58}Ni + {sup 54}Fe reaction. Finally the N/Z dependence of the fragmentation structure of different compound systems formed via {sup 58}Ni beam (projectile) is explored. (orig.)

Role of rotational energy component in the dynamics of 16O+198Pt reaction

Directory of Open Access Journals (Sweden)

Sharma Manoj K.

2017-01-01

Full Text Available The role of rotational energy is investigated in reference to the dynamics of 16O+198Pt →214Rn∗ reaction using the sticking (IS and the non-sticking (INS limits of moment of inertia within the framework of dynamical cluster decay model. The decay barrier height and barrier position get significantly modified for the use of sticking or non-sticking choice, which in turn reproduce the evaporation residue and the fusion-fission cross-sections nicely by the IS approach, while the INS approach provides feasible addressal of data only for evaporation residue channel. Moreover, the fragmentation path of decaying fragments of 214Rn∗ compound nucleus gets influenced for different choices of moment of inertia. Beside this, the role of nuclear deformations i.e. static, dynamic quadurpole (β2 and higher order static deformation up to β4 are duly investigated for both choices of the moment of inertia.

Strategies for innovation in multicomponent reaction design.

Science.gov (United States)

Ganem, Bruce

2009-03-17

By generating structural complexity in a single step from three or more reactants, multicomponent reactions (MCRs) make it possible to synthesize target compounds with greater efficiency and atom economy. The history of such reactions can be traced to the mid-19th century when Strecker first produced alpha-aminonitriles from the condensation of aldehydes with ammonia and hydrogen cyanide. Recently, academic chemists have renewed their interest in MCRs. In part, the pharmaceutical industry has fueled this resurgence because of the growing need to assemble libraries of structurally complex substances for evaluation as lead compounds in drug discovery and development programs. The application of MCRs to that increasingly important objective remains limited by the relatively small number of such reactions that can be broadly applied to prepare biologically relevant or natural-product-like molecular frameworks. We were interested in applying logic-based approaches, such as our single reactant replacement (SRR) approach, as a way both to improve known MCRs and to design new multiple-component routes to bioactive structures. This Account provides several examples that illustrate the use of SRR with known MCRs as starting points for synthetic innovation in this area. As part of our working hypothesis, we initially explored strategies for engineering improvements into known MCRs, either by increasing the dimensionality--that is, changing an n-component to an (n + 1)-component reaction--or broadening the scope of useful input structures, or both. By exhaustively applying retrosynthetic analysis to the cognate MCR to identify and exploit alternative entry points into the overall reaction manifold, we have devised several such re-engineered MCRs. Serendipitous findings have also augmented the yield of useful developments from our logic-inspired approach. In some cases, we have identified surprising links between different compound families that provide useful new entry points

Mepolizumab for Treating Severe Eosinophilic Asthma: An Evidence Review Group Perspective of a NICE Single Technology Appraisal.

Science.gov (United States)

Bermejo, Iñigo; Stevenson, Matt; Cooper, Katy; Harnan, Sue; Hamilton, Jean; Clowes, Mark; Carroll, Christopher; Harrison, Tim; Saha, Shironjit

2018-02-01

As part of its single technology appraisal (STA) process, the National Institute for Health and Care Excellence (NICE) invited the company (GlaxoSmithKline) that manufactures mepolizumab (Nucala ® ) to submit evidence on the clinical and cost effectiveness of mepolizumab for the treatment of severe eosinophilic asthma. The School of Health and Related Research Technology Appraisal Group (ScHARR-TAG) at the University of Sheffield was commissioned to act as the independent evidence review group (ERG). The ERG produced a review of the evidence for the clinical and cost effectiveness of mepolizumab as add-on to standard of care (SoC) compared with SoC and omalizumab, based upon the company's submission to NICE. The clinical-effectiveness evidence in the company's submission was based predominantly on three randomised controlled trials (DREAM, MENSA and SIRIUS) comparing add-on mepolizumab with placebo plus SoC. The relevant population was defined in terms of degree of asthma severity (four or more exacerbations in the previous year and/or dependency on maintenance oral corticosteroids [mOCS]) and degree of eosinophilia (a blood eosinophil count of ≥ 300 cells/µl in the previous year) based on post hoc subgroup analyses of the pivotal trials. Other subpopulations were considered throughout the appraisal, defined by different eosinophil measurements, number of exacerbations and dependency (or lack thereof) on mOCS. Statistically significant reductions in clinically significant exacerbations were observed in patients receiving mepolizumab compared with SoC meta-analysed across MENSA and DREAM in the modified intention-to-treat (ITT) population (rate ratio [RR] 0.51; 95% confidence interval [CI] 0.42-0.62) as well as in the relevant population (RR 0.47; 95% CI 0.36-0.62). In terms of quality of life, differences on the St. George's Respiratory Questionnaire in MENSA for add-on subcutaneous mepolizumab 100 mg vs. placebo were 7 and 7.5 units in the modified ITT and

Engineered Alloy Structures by Friction Stir Reaction Processing, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — This SBIR Phase I effort examines the feasibility of an innovative surface modification technology incorporating friction stir reaction processing for producing...

Power and Torque Characteristics of Diesel Engine Fuelled by Palm-Kernel Oil Biodiesel

Directory of Open Access Journals (Sweden)

Oguntola J. ALAMU

2009-07-01

Full Text Available Short-term engine performance tests were carried out on test diesel engine fuelled with Palm kernel oil (PKO biodiesel. The biodiesel fuel was produced through transesterification process using 100g PKO, 20.0% ethanol (wt%, 1.0% potassium hydroxide catalyst at 60°C reaction temperature and 90min. reaction time. The diesel engine was attached to a general electric dynamometer. Torque and power delivered by the engine were monitored throughout the 24-hour test duration at 1300, 1500, 1700, 2000, 2250 and 2500rpm. At all engine speeds tested, results showed that torque and power outputs for PKO biodiesel were generally lower than those for petroleum diesel. Also, Peak torque for PKO biodiesel occurred at a lower engine speed compared to diesel.

A Mw 6.3 earthquake scenario in the city of Nice (southeast France): ground motion simulations

Science.gov (United States)

Salichon, Jérome; Kohrs-Sansorny, Carine; Bertrand, Etienne; Courboulex, Françoise

2010-07-01

The southern Alps-Ligurian basin junction is one of the most seismically active zone of the western Europe. A constant microseismicity and moderate size events (3.5 case of an offshore Mw 6.3 earthquake located at the place where two moderate size events (Mw 4.5) occurred recently and where a morphotectonic feature has been detected by a bathymetric survey. We used a stochastic empirical Green’s functions (EGFs) summation method to produce a population of realistic accelerograms on rock and soil sites in the city of Nice. The ground motion simulations are calibrated on a rock site with a set of ground motion prediction equations (GMPEs) in order to estimate a reasonable stress-drop ratio between the February 25th, 2001, Mw 4.5, event taken as an EGF and the target earthquake. Our results show that the combination of the GMPEs and EGF techniques is an interesting tool for site-specific strong ground motion estimation.

Notion Of Artificial Labs Slow Global Warming And Advancing Engine Studies Perspectives On A Computational Experiment On Dual-Fuel Compression-Ignition Engine Research

Directory of Open Access Journals (Sweden)

Tonye K. Jack

2017-06-01

Full Text Available To appreciate clean energy applications of the dual-fuel internal combustion engine D-FICE with pilot Diesel fuel to aid public policy formulation in terms of present and future benefits to the modern transportation stationary power and promotion of oil and gas green- drilling the brief to an engine research team was to investigate the feasible advantages of dual-fuel compression-ignition engines guided by the following concerns i Sustainable fuel and engine power delivery ii The requirements for fuel flexibility iii Low exhausts emissions and environmental pollution iv Achieving low specific fuel consumption and economy for maximum power v The comparative advantages over the conventional Diesel engines vi Thermo-economic modeling and analysis for the optimal blend as basis for a benefitcost evaluation Planned in two stages for reduced cost and fast turnaround of results - initial preliminary stage with basic simple models and advanced stage with more detailed complex modeling. The paper describes a simplified MATLAB based computational experiment predictive model for the thermodynamic combustion and engine performance analysis of dual-fuel compression-ignition engine studies operating on the theoretical limited-pressure cycle with several alternative fuel-blends. Environmental implications for extreme temperature moderation are considered by finite-time thermodynamic modeling for maximum power with predictions for pollutants formation and control by reaction rates kinetics analysis of systematic reduced plausible coupled chemistry models through the NCN reaction pathway for the gas-phase reactions classes of interest. Controllable variables for engine-out pollutants emissions reduction and in particular NOx elimination are identified. Verifications and Validations VampV through Performance Comparisons were made using a clinical approach in selection of StrokeBore ratios greater-than and equal-to one amp88051 low-to-high engine speeds and medium

The hard start phenomena in hypergolic engines. Volume 4: The chemistry of hydrazine fuels and nitrogen tetroxide propellant systems

Science.gov (United States)

Miron, Y.; Perlee, H. E.

1974-01-01

The various chemical reactions that occur and that could possibly occur in the RCS engines utilizing hydrazine-type fuel/nitrogen tetroxide propellant systems, prior to ignition (preignition), during combustion, and after combustion (postcombustion), and endeavors to relate the hard-start phenomenon to some of these reactions are discussed. The discussion is based on studies utilizing a variety of experimental techniques and apparatus as well as current theories of chemical reactions and reaction kinetics. The chemical reactions were studied in low pressure gas flow reactors, low temperature homogeneous- and heterogeneous-phase reactors, simulated two-dimensional (2-D) engines, and scaled and full size engines.

Self-assembled monolayer exchange reactions as a tool for channel interface engineering in low-voltage organic thin-film transistors.

Science.gov (United States)

Lenz, Thomas; Schmaltz, Thomas; Novak, Michael; Halik, Marcus

2012-10-02

In this work, we compared the kinetics of monolayer self-assembly long-chained carboxylic acids and phosphonic acids on thin aluminum oxide surfaces and investigated their dielectric properties in capacitors and low-voltage organic thin-film transistors. Phosphonic acid anchor groups tend to substitute carboxylic acid molecules on aluminum oxide surfaces and thus allow the formation of mixed or fully exchanged monolayers. With different alkyl chain substituents (n-alkyl or fluorinated alkyl chains), the exchange reaction can be monitored as a function of time by static contact angle measurements. The threshold voltage in α,α'-dihexyl-sexithiophene thin-film transistors composed of such mixed layer dielectrics correlates with the exchange progress and can be tuned from negative to positive values or vice versa depending on the dipole moment of the alkyl chain substituents. The change in the dipole moment with increasing exchange time also shifts the capacitance of these devices. The rate constants for exchange reactions determined by the time-dependent shift of static contact angle, threshold voltage, and capacitance exhibit virtually the same value thus proving the exchange kinetics to be highly controllable. In general, the exchange approach is a powerful tool in interface engineering, displaying a great potential for tailoring of device characteristics.

Study of In-Cylinder Reactions of High Power-Density Direct Injection Diesel Engines

National Research Council Canada - National Science Library

Jansons, M

2004-01-01

Direct-injection (DI) Diesel or compression-ignition (CI) engine combustion process is investigated when new design and operational strategies are employed in order to achieve a high power-density (HPD) engine...

Ramucirumab for Treating Advanced Gastric Cancer or Gastro-Oesophageal Junction Adenocarcinoma Previously Treated with Chemotherapy: An Evidence Review Group Perspective of a NICE Single Technology Appraisal.

Science.gov (United States)

Büyükkaramikli, Nasuh C; Blommestein, Hedwig M; Riemsma, Rob; Armstrong, Nigel; Clay, Fiona J; Ross, Janine; Worthy, Gill; Severens, Johan; Kleijnen, Jos; Al, Maiwenn J

2017-12-01

The National Institute for Health and Care Excellence (NICE) invited the company that manufactures ramucirumab (Cyramza ® , Eli Lilly and Company) to submit evidence of the clinical and cost effectiveness of the drug administered alone (monotherapy) or with paclitaxel (combination therapy) for treating adults with advanced gastric cancer or gastro-oesophageal junction (GC/GOJ) adenocarcinoma that were previously treated with chemotherapy, as part of the Institute's single technology appraisal (STA) process. Kleijnen Systematic Reviews Ltd (KSR), in collaboration with Erasmus University Rotterdam, was commissioned to act as the Evidence Review Group (ERG). This paper describes the company's submission, the ERG review, and NICE's subsequent decisions. Clinical effectiveness evidence for ramucirumab monotherapy (RAM), compared with best supportive care (BSC), was based on data from the REGARD trial. Clinical effectiveness evidence for ramucirumab combination therapy (RAM + PAC), compared with paclitaxel monotherapy (PAC), was based on data from the RAINBOW trial. In addition, the company undertook a network meta-analysis (NMA) to compare RAM + PAC with BSC and docetaxel. Cost-effectiveness evidence of monotherapy and combination therapy relied on partitioned survival, cost-utility models. The base-case incremental cost-effectiveness ratio (ICER) of the company was £188,640 (vs BSC) per quality-adjusted life-year (QALY) gained for monotherapy and £118,209 (vs BSC) per QALY gained for combination therapy. The ERG assessment indicated that the modelling structure represented the course of the disease; however, a few errors were identified and some of the input parameters were challenged. The ERG provided a new base case, with ICERs (vs BSC) of £188,100 (monotherapy) per QALY gained and £129,400 (combination therapy) per QALY gained and conducted additional exploratory analyses. The NICE Appraisal Committee (AC), considered the company's decision problem was in

Temporal changes of radioactive contamination of Ploučnice river Inundation area, Czech Republic

International Nuclear Information System (INIS)

Neznal, M.; Gnojek, I.; Thinová, L.; Neubauer, L.

2010-01-01

The inundation area of Ploučnice river has been contaminated by natural radionuclides during the early mining of the uranium ore deposit in the region of Stráž pod Ralskem, Northern Bohemia, i.e. in the seventies and in the eighties of the last century. The evaluation of the level of contamination has faced many problems. During several floods that occurred after the primary contamination, the contaminants were spread to a relatively large territory, but the level of contamination became fairly variable. Large regions have not been affected at all, and measured values of gamma dose rate are comparable with the values of natural background. On the other hand, a higher contamination can be found at small areas, often situated far from the river - for example in catchwater drains. Moreover, many contaminated areas are located in places that are difficult to reach. The topographical orientation is also intricate in such places. A study of temporal changes of contamination was based on a comparison of data obtained using two different methods: airborne gamma-ray spectrometry and detailed ground gamma dose rate and in situ gamma spectrometry measurements

Pore surface engineering in covalent organic frameworks.

Science.gov (United States)

Nagai, Atsushi; Guo, Zhaoqi; Feng, Xiao; Jin, Shangbin; Chen, Xiong; Ding, Xuesong; Jiang, Donglin

2011-11-15

Covalent organic frameworks (COFs) are a class of important porous materials that allow atomically precise integration of building blocks to achieve pre-designable pore size and geometry; however, pore surface engineering in COFs remains challenging. Here we introduce pore surface engineering to COF chemistry, which allows the controlled functionalization of COF pore walls with organic groups. This functionalization is made possible by the use of azide-appended building blocks for the synthesis of COFs with walls to which a designable content of azide units is anchored. The azide units can then undergo a quantitative click reaction with alkynes to produce pore surfaces with desired groups and preferred densities. The diversity of click reactions performed shows that the protocol is compatible with the development of various specific surfaces in COFs. Therefore, this methodology constitutes a step in the pore surface engineering of COFs to realize pre-designed compositions, components and functions.

Effect of Ca, Ce or K oxide addition on the activity of Ni/SiO{sub 2} catalysts for the methane decomposition reaction

Energy Technology Data Exchange (ETDEWEB)

Zapata, Beatriz; Torres-Garcia, Enelio [Instituto Mexicano del Petroleo, Programa de Procesos y Reactores, Eje C. 152, Mexico, D.F., C.P. 07730 (Mexico); Valenzuela, Miguel A.; Palacios, Jorge [Instituto Politecnico Nacional-ESIQIE, Lab. Catalisis y Materiales, Zacatenco, Mexico, D.F., C.P. 07738 (Mexico)

2010-11-15

To increase the activity and stability of Ni/SiO{sub 2} catalysts, a series of Ni-Ca, Ni-K and Ni-Ce promoted catalysts were prepared by successive impregnations. The textural properties, reducibility and catalytic performance in the methane decomposition reaction were investigated. The catalyst containing 30 wt.% Ni and 30 wt.% cerium oxide greatly increased the conversion of methane (90% of equilibrium value) and improved the stability, whereas the Ni-K and Ni-Ca were less active and stable than the Ni/SiO{sub 2} catalyst. The results suggest that Ce addition prevents the sintering of nickel particles during reduction process maintaining a random distribution between the silica and cerium oxide improving the distribution and migration of deposited carbon. (author)

Synergistic Interlayer and Defect Engineering in VS2 Nanosheets toward Efficient Electrocatalytic Hydrogen Evolution Reaction

KAUST Repository

Zhang, Junjun

2017-12-27

A simple one-pot solvothermal method is reported to synthesize VS2 nanosheets featuring rich defects and an expanded (001) interlayer spacing as large as 1.00 nm, which is a ≈74% expansion as relative to that (0.575 nm) of the pristine counterpart. The interlayer-expanded VS2 nanosheets show extraordinary kinetic metrics for electrocatalytic hydrogen evolution reaction (HER), exhibiting a low overpotential of 43 mV at a geometric current density of 10 mA cm-2 , a small Tafel slope of 36 mV dec-1 , and long-term stability of 60 h without any current fading. The performance is much better than that of the pristine VS2 with a normal interlayer spacing, and even comparable to that of the commercial Pt/C electrocatalyst. The outstanding electrocatalytic activity is attributed to the expanded interlayer distance and the generated rich defects. Increased numbers of exposed active sites and modified electronic structures are achieved, resulting in an optimal free energy of hydrogen adsorption (∆GH ) from density functional theory calculations. This work opens up a new door for developing transition-metal dichalcogenide nanosheets as high active HER electrocatalysts by interlayer and defect engineering.

Synergistic Interlayer and Defect Engineering in VS2 Nanosheets toward Efficient Electrocatalytic Hydrogen Evolution Reaction

KAUST Repository

Zhang, Junjun; Zhang, Chenhui; Wang, Zhenyu; Zhu, Jian; Wen, Zhiwei; Zhao, Xingzhong; Zhang, Xixiang; Xu, Jun; Lu, Zhouguang

2017-01-01

A simple one-pot solvothermal method is reported to synthesize VS2 nanosheets featuring rich defects and an expanded (001) interlayer spacing as large as 1.00 nm, which is a ≈74% expansion as relative to that (0.575 nm) of the pristine counterpart. The interlayer-expanded VS2 nanosheets show extraordinary kinetic metrics for electrocatalytic hydrogen evolution reaction (HER), exhibiting a low overpotential of 43 mV at a geometric current density of 10 mA cm-2 , a small Tafel slope of 36 mV dec-1 , and long-term stability of 60 h without any current fading. The performance is much better than that of the pristine VS2 with a normal interlayer spacing, and even comparable to that of the commercial Pt/C electrocatalyst. The outstanding electrocatalytic activity is attributed to the expanded interlayer distance and the generated rich defects. Increased numbers of exposed active sites and modified electronic structures are achieved, resulting in an optimal free energy of hydrogen adsorption (∆GH ) from density functional theory calculations. This work opens up a new door for developing transition-metal dichalcogenide nanosheets as high active HER electrocatalysts by interlayer and defect engineering.

Quantum chemical approach to estimating the thermodynamics of metabolic reactions.

Science.gov (United States)

Jinich, Adrian; Rappoport, Dmitrij; Dunn, Ian; Sanchez-Lengeling, Benjamin; Olivares-Amaya, Roberto; Noor, Elad; Even, Arren Bar; Aspuru-Guzik, Alán

2014-11-12

Thermodynamics plays an increasingly important role in modeling and engineering metabolism. We present the first nonempirical computational method for estimating standard Gibbs reaction energies of metabolic reactions based on quantum chemistry, which can help fill in the gaps in the existing thermodynamic data. When applied to a test set of reactions from core metabolism, the quantum chemical approach is comparable in accuracy to group contribution methods for isomerization and group transfer reactions and for reactions not including multiply charged anions. The errors in standard Gibbs reaction energy estimates are correlated with the charges of the participating molecules. The quantum chemical approach is amenable to systematic improvements and holds potential for providing thermodynamic data for all of metabolism.

Flows and chemical reactions in homogeneous mixtures

CERN Document Server

Prud'homme, Roger

2013-01-01

Flows with chemical reactions can occur in various fields such as combustion, process engineering, aeronautics, the atmospheric environment and aquatics. The examples of application chosen in this book mainly concern homogeneous reactive mixtures that can occur in propellers within the fields of process engineering and combustion: - propagation of sound and monodimensional flows in nozzles, which may include disequilibria of the internal modes of the energy of molecules; - ideal chemical reactors, stabilization of their steady operation points in the homogeneous case of a perfect mixture and c

Micro-/nano-engineered cellular responses for soft tissue engineering and biomedical applications.

Science.gov (United States)

Tay, Chor Yong; Irvine, Scott Alexander; Boey, Freddy Y C; Tan, Lay Poh; Venkatraman, Subbu

2011-05-23

The development of biomedical devices and reconstruction of functional ex vivo tissues often requires the need to fabricate biomimetic surfaces with features of sub-micrometer precision. This can be achieved with the advancements in micro-/nano-engineering techniques, allowing researchers to manipulate a plethora of cellular behaviors at the cell-biomaterial interface. Systematic studies conducted on these 2D engineered surfaces have unraveled numerous novel findings that can potentially be integrated as part of the design consideration for future 2D and 3D biomaterials and will no doubt greatly benefit tissue engineering. In this review, recent developments detailing the use of micro-/nano-engineering techniques to direct cellular orientation and function pertinent to soft tissue engineering will be highlighted. Particularly, this article aims to provide valuable insights into distinctive cell interactions and reactions to controlled surfaces, which can be exploited to understand the mechanisms of cell growth on micro-/nano-engineered interfaces, and to harness this knowledge to optimize the performance of 3D artificial soft tissue grafts and biomedical applications. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Integrating chemical engineering fundamentals in the capstone process design project

DEFF Research Database (Denmark)

von Solms, Nicolas; Woodley, John; Johnsson, Jan Erik

2010-01-01

Reaction Engineering. In order to incorporate reactor design into process design in a meaningful way, the teachers of the respective courses need to collaborate (Standard 9 – Enhancement of Faculty CDIO skills). The students also see that different components of the chemical engineering curriculum relate......All B.Eng. courses offered at the Technical University of Denmark (DTU) must now follow CDIO standards. The final “capstone” course in the B.Eng. education is Process Design, which for many years has been typical of chemical engineering curricula worldwide. The course at DTU typically has about 30...... of the CDIO standards – especially standard 3 – Integrated Curriculum - means that the course projects must draw on competences provided in other subjects which the students are taking in parallel with Process Design – specifically Process Control and Reaction Engineering. In each semester of the B...

Highly Stable and Active Catalyst for Sabatier Reactions

Science.gov (United States)

Hu, Jianli; Brooks, Kriston P.

2012-01-01

Highly active Ru/TiO2 catalysts for Sabatier reaction have been developed. The catalysts have shown to be stable under repeated shutting down/startup conditions. When the Ru/TiO2 catalyst is coated on the engineered substrate Fe-CrAlY felt, activity enhancement is more than doubled when compared with an identically prepared engineered catalyst made from commercial Degussa catalyst. Also, bimetallic Ru-Rh/TiO2 catalysts show high activity at high throughput.

Consideration on nuclear fusion in plasma by the magnetic confinement as a heat engine

International Nuclear Information System (INIS)

Tsuji, Yoshio

1990-01-01

In comparing nuclear fusion in plasma by the magnetic confinement with nuclear fission and chemical reactions, the power density and the function of a heat engine are discussed using a new parameter G introduced as an eigenvalue of a reaction and the value of q introduced to estimate the thermal efficiency of a heat engine. It is shown that the fusion reactor by the magnetic confinement is very difficult to be a modern heat engine because of the lack of some indispensable functions as a modern heat engine. The value of G and q have the important role in the consideration. (author)

Heterogeneously Catalysed Chemical Reactions in Carbon Dioxide Medium

DEFF Research Database (Denmark)

Musko, Nikolai E.

In this PhD-study the different areas of chemical engineering, heterogeneous catalysis, supercritical fluids, and phase equilibrium thermodynamics have been brought together for selected reactions. To exploit the beneficial properties of supercritical fluids in heterogeneous catalysis, experimental...... studies of catalytic chemical reactions in dense and supercritical carbon dioxide have been complemented by the theoretical calculations of phase equilibria using advanced thermodynamic models. In the recent years, the use of compressed carbon dioxide as innovative, non-toxic and non-flammable, cheap......, and widely available reaction medium for many practical and industrial applications has drastically increased. Particularly attractive are heterogeneously catalysed chemical reactions. The beneficial use of CO2 is attributed to its unique properties at dense and supercritical states (at temperatures...

Novel reaction engineering concepts for catalyst immobilisation in hydroformylation

Energy Technology Data Exchange (ETDEWEB)

Cole-Hamilton, D.J.; Desset, S.L.; Muldoon, M.J. [St. Andrews Univ. (United Kingdom). EaStChem, School of Chemistry; Hintermair, U. [St. Andrews Univ. (United Kingdom). EaStChem, School of Chemistry]|[CNRS, Lyon (France). Laboratoire de Chimie Organometallique de Surface; Santini, C.C. [CNRS, Lyon (France). Laboratoire de Chimie Organometallique de Surface

2006-07-01

Various methods for the separation of the aldehyde products from the catalyst and any solvent during or after hydroformylation reactions of long chain alkenes are reviewed. The catalyst can be immobilized on a soluble or insoluble support or in a phase that does not mix with the product phase under the separation conditions. Aqueous, fluorous, and ionic liquid biphasic systems as well as systems involving scCO{sub 2} sometimes in conjunction with one or other of the types of solvents listed above. Hybrid systems in which a liquid phase containing the catalyst is supported on a microporous solid support are also discussed. The advantages and disadvantages of the various systems are considered and new results concerning the addition of [1-octyl-3-methylimidazolium]Br to aqueous biphasic systems and the use of supercritical fluids to transport substrates over supported ionic liquid phases are presented. Both of these new approaches give high reaction rates, which for the supported ionic liquid phase catalysts can be maintained for at least 40 h of continuous flow operation. For the aqueous biphasic systems, leaching is low and phase separation is fast. (orig.)

Autonomous Vehicles: Disengagements, Accidents and Reaction Times.

Directory of Open Access Journals (Sweden)

Vinayak V Dixit

Full Text Available Autonomous vehicles are being viewed with scepticism in their ability to improve safety and the driving experience. A critical issue with automated driving at this stage of its development is that it is not yet reliable and safe. When automated driving fails, or is limited, the autonomous mode disengages and the drivers are expected to resume manual driving. For this transition to occur safely, it is imperative that drivers react in an appropriate and timely manner. Recent data released from the California trials provide compelling insights into the current factors influencing disengagements of autonomous mode. Here we show that the number of accidents observed has a significantly high correlation with the autonomous miles travelled. The reaction times to take control of the vehicle in the event of a disengagement was found to have a stable distribution across different companies at 0.83 seconds on average. However, there were differences observed in reaction times based on the type of disengagements, type of roadway and autonomous miles travelled. Lack of trust caused by the exposure to automated disengagements was found to increase the likelihood to take control of the vehicle manually. Further, with increased vehicle miles travelled the reaction times were found to increase, which suggests an increased level of trust with more vehicle miles travelled. We believe that this research would provide insurers, planners, traffic management officials and engineers fundamental insights into trust and reaction times that would help them design and engineer their systems.

Autonomous Vehicles: Disengagements, Accidents and Reaction Times.

Science.gov (United States)

Dixit, Vinayak V; Chand, Sai; Nair, Divya J

2016-01-01

Autonomous vehicles are being viewed with scepticism in their ability to improve safety and the driving experience. A critical issue with automated driving at this stage of its development is that it is not yet reliable and safe. When automated driving fails, or is limited, the autonomous mode disengages and the drivers are expected to resume manual driving. For this transition to occur safely, it is imperative that drivers react in an appropriate and timely manner. Recent data released from the California trials provide compelling insights into the current factors influencing disengagements of autonomous mode. Here we show that the number of accidents observed has a significantly high correlation with the autonomous miles travelled. The reaction times to take control of the vehicle in the event of a disengagement was found to have a stable distribution across different companies at 0.83 seconds on average. However, there were differences observed in reaction times based on the type of disengagements, type of roadway and autonomous miles travelled. Lack of trust caused by the exposure to automated disengagements was found to increase the likelihood to take control of the vehicle manually. Further, with increased vehicle miles travelled the reaction times were found to increase, which suggests an increased level of trust with more vehicle miles travelled. We believe that this research would provide insurers, planners, traffic management officials and engineers fundamental insights into trust and reaction times that would help them design and engineer their systems.

Autonomous Vehicles: Disengagements, Accidents and Reaction Times

Science.gov (United States)

Dixit, Vinayak V.; Chand, Sai; Nair, Divya J.

2016-01-01

Autonomous vehicles are being viewed with scepticism in their ability to improve safety and the driving experience. A critical issue with automated driving at this stage of its development is that it is not yet reliable and safe. When automated driving fails, or is limited, the autonomous mode disengages and the drivers are expected to resume manual driving. For this transition to occur safely, it is imperative that drivers react in an appropriate and timely manner. Recent data released from the California trials provide compelling insights into the current factors influencing disengagements of autonomous mode. Here we show that the number of accidents observed has a significantly high correlation with the autonomous miles travelled. The reaction times to take control of the vehicle in the event of a disengagement was found to have a stable distribution across different companies at 0.83 seconds on average. However, there were differences observed in reaction times based on the type of disengagements, type of roadway and autonomous miles travelled. Lack of trust caused by the exposure to automated disengagements was found to increase the likelihood to take control of the vehicle manually. Further, with increased vehicle miles travelled the reaction times were found to increase, which suggests an increased level of trust with more vehicle miles travelled. We believe that this research would provide insurers, planners, traffic management officials and engineers fundamental insights into trust and reaction times that would help them design and engineer their systems. PMID:27997566

Venetoclax for Treating Chronic Lymphocytic Leukaemia: An Evidence Review Group Perspective of a NICE Single Technology Appraisal.

Science.gov (United States)

Mistry, Hema; Nduka, Chidozie; Connock, Martin; Colquitt, Jill; Mantopoulos, Theodoros; Loveman, Emma; Walewska, Renata; Mason, James

2018-04-01

Venetoclax is licensed to treat relapsed or refractory (R/R) chronic lymphocytic leukaemia (CLL). As part of the Single Technology Appraisal (STA) ID944, the National Institute for Health and Care Excellence (NICE) invited AbbVie, the manufacturer, to submit evidence on the use of venetoclax, within its licensed indication. The Evidence Review Group (ERG), Warwick Evidence, was asked to provide an independent and critical review of the submitted evidence. Evidence came from three single-arm trials in CLL patients with or without 17p deletion [del(17p])/TP53 chromosomal abnormalities. The anticipated licensed indication specified that venetoclax-eligible del(17p)/TP53 patients should have not responded to, or be deemed unsuitable for, B-cell receptor inhibitor (BCRi) therapy, and that non-del(17p)/TP53 patients should have not responded to both chemoimmunotherapy and BCRi therapy. The three trials were heterogeneous in terms of both del(17p)/TP53 status and previous exposure to BCRi therapy. The M13-982 study investigated 158 R/R CLL patients with the 17p deletion, but only a small number had received previous BCRi therapy; the M12-175 study investigated 67 patients with CLL or small lymphocytic lymphoma, some with the 17p deletion, but very few previously treated with BCRi therapy; and the M14-032 study included 105 patients previously treated with BCRi therapy (either idelalisib or ibrutinib), some of whom had unknown mutation status. The ERG concluded that the study populations did not directly conform to those specified in the licensed indication or in the NICE scope. Outcomes reported included overall response rate (ORR), duration of response, progression-free survival (PFS) and overall survival (OS); adverse events were reported for the pooled population of all three studies, as well as separately for each study. The median PFS was 41.4 and 27.2 months among patients in the M12-175 and M13-982 trials, respectively, whereas the median PFS was not reached in

Will the implementation of the 2007 National Institute for Health and Clinical Excellence (NICE) guidelines on childhood urinary tract infection (UTI) in the UK miss significant urinary tract pathology?

Science.gov (United States)

Deader, Rafia; Tiboni, Sonia G; Malone, Padraig S J; Fairhurst, Joanna

2012-08-01

• To investigate whether the implementation of the August 2007 National Institute for Health and Clinical Excellence (NICE) guidelines would miss significant urinary tract pathology in children with urinary tract infection (UTI). • All ultrasound (US) performed in children aged >6 months, during the year 1 August 2006 to 31 July 2007 for UTI, were retrospectively studied. • Each US scan in the study population of 346 was categorised dependent on whether it was appropriate or inappropriate to have been performed under the new guidelines and whether the US scan was normal or abnormal. • The records of each patient with an inappropriate abnormal US scan were re-analysed to see if patient management was affected by the US scan. • In 2011 patients with an original inappropriate abnormal US scan were re-evaluated to identify if any had presented with further urinary pathology. • In accordance with the NICE guidelines patients were divided by age. • Children aged 0.5-3 years: 78/95 (82%) US scans were inappropriate of which 12 (15%) were abnormal and four of these had a further documented UTI. After careful assessment of the US abnormalities it was judged that only one would have benefited from the initial US scan. • Children aged >3 years: 146/251 (58%) US scans were inappropriate of which 21(14%) were abnormal and six of these (29%) had a further documented UTI. After careful assessment of the US abnormalities it was judged that only three of 21 (14%) would have benefited from the initial US scan. • The vast majority of anomalies detected on the inappropriate US scans were of little clinical significance. • It is difficult to identify any patient who would have been truly disadvantaged if the US scan had not been performed after the initial UTI. • The NICE guidelines are safe to follow. © 2011 THE AUTHORS. BJU INTERNATIONAL © 2011 BJU INTERNATIONAL.

The Diels-Alder reaction: A powerful tool for the design of drug delivery systems and biomaterials.

Science.gov (United States)

Gregoritza, Manuel; Brandl, Ferdinand P

2015-11-01

Click reactions have the potential to greatly facilitate the development of drug delivery systems and biomaterials. These reactions proceed under mild conditions, give high yields, and form only inoffensive by-products. The Diels-Alder cycloaddition is one of the click reactions that do not require any metal catalyst; it is one of the most useful reactions in synthetic organic chemistry and material design. Herein, we highlight possible applications of the Diels-Alder reaction in pharmaceutics and biomedical engineering. Particular focus is placed on the synthesis of polymers and dendrimers for drug delivery, the preparation of functionalized surfaces, bioconjugation techniques, and applications of the Diels-Alder reaction in nanotechnology. Moreover, applications of the reaction for the preparation of hydrogels for drug delivery and tissue engineering are reviewed. A general introduction to the Diels-Alder reaction is presented, along with a discussion of potential pitfalls and challenges. At the end of the article, we provide a set of tools that may facilitate the application of the Diels-Alder reaction to solve important pharmaceutical or biomedical problems. Copyright © 2015 Elsevier B.V. All rights reserved.

A multi-pathway model for photosynthetic reaction center

International Nuclear Information System (INIS)

Qin, M.; Shen, H. Z.; Yi, X. X.

2016-01-01

Charge separation occurs in a pair of tightly coupled chlorophylls at the heart of photosynthetic reaction centers of both plants and bacteria. Recently it has been shown that quantum coherence can, in principle, enhance the efficiency of a solar cell, working like a quantum heat engine. Here, we propose a biological quantum heat engine (BQHE) motivated by Photosystem II reaction center (PSII RC) to describe the charge separation. Our model mainly considers two charge-separation pathways which is more than that typically considered in the published literature. We explore how these cross-couplings increase the current and power of the charge separation and discuss the effects of multiple pathways in terms of current and power. The robustness of the BQHE against the charge recombination in natural PSII RC and dephasing induced by environments is also explored, and extension from two pathways to multiple pathways is made. These results suggest that noise-induced quantum coherence helps to suppress the influence of acceptor-to-donor charge recombination, and besides, nature-mimicking architectures with engineered multiple pathways for charge separations might be better for artificial solar energy devices considering the influence of environments.

Chemical Engineering Education - Current and Future Trends

DEFF Research Database (Denmark)

Gani, Rafiqul

topics (transport phenomena, separations, reaction engineering, etc.) must remain strong, should the applications that currently emphasize commodity chemicals also include new topics such as sustainability, and product design? In Europe, the European Federation of Chemical Engineering (EFCE) has taken...... has a product focus. With this shift of the chemical industry, what should be the curriculum of the chemical engineering degrees at the BSc- and MSc-levels, and, are the skill set of chemical engineers appropriate for this altered chemical industry? While the basic skill set, defined by the core...... a leading role to define the chemical engineering curriculum. The result has been a set of recommendations for the first (BSc), second (MSc) and third (PhD) cycle chemical engineering education aligned to the Bologna Process. They recommend that students studying towards bachelor and masters qualifications...

A comprehensive model to determine the effects of temperature and species fluctuations on reaction rates in turbulent reaction flows

Science.gov (United States)

Magnotti, F.; Diskin, G.; Matulaitis, J.; Chinitz, W.

1984-01-01

The use of silane (SiH4) as an effective ignitor and flame stabilizing pilot fuel is well documented. A reliable chemical kinetic mechanism for prediction of its behavior at the conditions encountered in the combustor of a SCRAMJET engine was calculated. The effects of hydrogen addition on hydrocarbon ignition and flame stabilization as a means for reduction of lengthy ignition delays and reaction times were studied. The ranges of applicability of chemical kinetic models of hydrogen-air combustors were also investigated. The CHARNAL computer code was applied to the turbulent reaction rate modeling.

20 Engineering Technologies Which Changed The World

International Nuclear Information System (INIS)

Lee, In Sik; Shin, Dong Won; Mun, Jung Yang and others

2004-07-01

This book deals with 20 engineering technologies which changed the world, these are about a, compass, papermaking, a lens, gunpowder, machine watch, printing technique, vaccine, a suspension bridge, a railroad, a loom, photograph, petroleum, automobile, electricity, wireless communications, synthetic medicine, a jet engine and a rocket, nuclear bombs, ENIAC, and polymerase chain reaction method. Each skill is introduced with history and the detailed reports by other persons.

Engineering E. coli for triglyceride accumulation through native and heterologous metabolic reactions.

Science.gov (United States)

Rucker, Joanna; Paul, Julie; Pfeifer, Blaine A; Lee, Kyongbum

2013-03-01

Triglycerides, traditionally sourced from plant oils, are heavily used in both industrial and healthcare applications. Commercially significant products produced from triglycerides include biodiesel, lubricants, moisturizers, and oils for cooking and dietary supplements. The need to rely upon plant-based production, however, raises concerns of increasing demand and sustainability. The reliance on crop yields and a strong demand for triglycerides provides motivation to engineer production from a robust microbial platform. In this study, Escherichia coli was engineered to synthesize and accumulate triglycerides. Triglycerides were produced from cell wall phospholipid precursors through engineered expression of two enzymes, phosphatidic acid phosphatase (PAP) and diacylglycerol acyltransferase (DGAT). A liquid chromatography-mass spectrometry (LC-MS) method was developed to analyze the production of triglycerides by the engineered E. coli strains. This proof-of-concept study demonstrated a yield of 1.1 mg/L triglycerides (2 g/L dry cell weight) in lysogeny broth medium containing 5 g/L glucose at 8 h following induction of PAP and DGAT expression. LC-MS results also demonstrated that the intracellular triglyceride composition of E. coli was highly conserved. Triglycerides containing the fatty acid distributions 16:0/16:0/16:1, 16:0/16:0/18:1, and 18:1/16:0/16:1 were found in highest concentrations and represent ∼70 % of triglycerides observed.

Proceedings of 20. Symposium of Malaysian Chemical Engineers (SOMChE 2006)

International Nuclear Information System (INIS)

2006-12-01

The objective of the symposium is to provide a platform for participants and relevant chemical engineering community to meet and encourage expertise and knowledge sharing and to allow recent chemical engineering research and innovation works to be properly documented, displayed and made known to interested parties. The subjects discussed are advanced material modeling and simulation bioprocess, catalysis, chemical engineering education (outcome-based education), computational fluid dynamics, drying technology, energy, environment, fine chemicals, food engineering, oil and gas, oleochemical, particle technology, petrochemical, pharmaceutical engineering, polymer technology, process control, process system, engineering, reaction engineering, renewable energy, separation

Fuel Cell Car Design Project for Freshman Engineering Courses

Science.gov (United States)

Duke, Steve R.; Davis, Virginia A.

2014-01-01

In the Samuel Ginn College of Engineering at Auburn University, we have integrated a semester long design project based on a toy fuel cell car into our freshman "Introduction to Chemical Engineering Class." The project provides the students a basic foundation in chemical reactions, energy, and dimensional analysis that facilitates…

Accident Locations, MDTA Accidents, Accidents on MDTA locations, Accidents on I 95, US 50, I 695, Accident on John F Kennedy Highway, Nice Bridge, Bay Bridge locations, Published in 2011, 1:1200 (1in=100ft) scale, Maryland Transportation Authority.

Data.gov (United States)

NSGIC State | GIS Inventory — Accident Locations dataset current as of 2011. MDTA Accidents, Accidents on MDTA locations, Accidents on I 95, US 50, I 695, Accident on John F Kennedy Highway, Nice...

Meteorological conditions in a thinner Arctic sea ice regime from winter to summer during the Norwegian Young Sea Ice expedition (N-ICE2015)

Science.gov (United States)

Cohen, Lana; Hudson, Stephen R.; Walden, Von P.; Graham, Robert M.; Granskog, Mats A.

2017-07-01

Atmospheric measurements were made over Arctic sea ice north of Svalbard from winter to early summer (January-June) 2015 during the Norwegian Young Sea Ice (N-ICE2015) expedition. These measurements, which are available publicly, represent a comprehensive meteorological data set covering the seasonal transition in the Arctic Basin over the new, thinner sea ice regime. Winter was characterized by a succession of storms that produced short-lived (less than 48 h) temperature increases of 20 to 30 K at the surface. These storms were driven by the hemispheric scale circulation pattern with a large meridional component of the polar jet stream steering North Atlantic storms into the high Arctic. Nonstorm periods during winter were characterized by strong surface temperature inversions due to strong radiative cooling ("radiatively clear state"). The strength and depth of these inversions were similar to those during the Surface Heat Budget of the Arctic Ocean (SHEBA) campaign. In contrast, atmospheric profiles during the "opaquely cloudy state" were different to those from SHEBA due to differences in the synoptic conditions and location within the ice pack. Storm events observed during spring/summer were the result of synoptic systems located in the Barents Sea and the Arctic Basin rather than passing directly over N-ICE2015. These synoptic systems were driven by a large-scale circulation pattern typical of recent years, with an Arctic Dipole pattern developing during June. Surface temperatures became near-constant 0°C on 1 June marking the beginning of summer. Atmospheric profiles during the spring and early summer show persistent lifted temperature and moisture inversions that are indicative of clouds and cloud processes.

In situ Fourier transform infrared spectroscopy and on-line differential electrochemical mass spectrometry study of the NH3BH3 oxidation reaction on gold electrodes

International Nuclear Information System (INIS)

Belén Molina Concha, M.; Chatenet, Marian; Lima, Fabio H.B.; Ticianelli, Edson A.

2013-01-01

The ammonia borane (NH 3 BH 3 ) oxidation reaction (ABOR) was studied on gold electrodes using the rotating disk electrode (RDE) setup and coupled physical techniques: on-line differential electrochemical mass spectrometry (DEMS) and in situ Fourier transform infrared spectroscopy (FTIR). Non-negligible heterogeneous hydrolysis in the low-potential region was asserted via molecular H 2 detection. As a consequence, the number of electron exchanged per BH 3 OH − species is ca. 3 at low potential, and only reaches ca. 6 above 0.6 V vs. RHE. These figures were confirmed by Levich and Koutecki–Levich calculations using the RDE experiments data. The nature of the ABOR intermediates and products was determined using in situ FTIR. While BH 2 species were detected during the ABOR, it seems that its adsorption onto the Au electrode proceeds via the O atom, in opposition to what happens during the borohydride oxidation reaction (BOR). Therefore, it is likely that the mechanism of the ABOR differs from that of the BOR. From the whole set of data (RDE, DEMS, FTIR), a relevant reaction pathway was proposed, including competition between the BH 3 OH − heterogeneous hydrolysis and oxidation at low potential, and preponderant oxidation at higher potential. Finally, a simplified kinetic modeling accounting with this reaction pathway was proposed, which nicely fits the stationary (i vs. E) ABOR plot

A new model to predict diffusive self-heating during composting incorporating the reaction engineering approach (REA) framework.

Science.gov (United States)

Putranto, Aditya; Chen, Xiao Dong

2017-05-01

During composting, self-heating may occur due to the exothermicities of the chemical and biological reactions. An accurate model for predicting maximum temperature is useful in predicting whether the phenomena would occur and to what extent it would have undergone. Elevated temperatures would lead to undesirable situations such as the release of large amount of toxic gases or sometimes would even lead to spontaneous combustion. In this paper, we report a new model for predicting the profiles of temperature, concentration of oxygen, moisture content and concentration of water vapor during composting. The model, which consists of a set of equations of conservation of heat and mass transfer as well as biological heating term, employs the reaction engineering approach (REA) framework to describe the local evaporation/condensation rate quantitatively. A good agreement between the predicted and experimental data of temperature during composting of sewage sludge is observed. The modeling indicates that the maximum temperature is achieved after some 46weeks of composting. Following this period, the temperature decreases in line with a significant decrease in moisture content and a tremendous increase in concentration of water vapor, indicating the massive cooling effect due to water evaporation. The spatial profiles indicate that the maximum temperature is approximately located at the middle-bottom of the compost piles. Towards the upper surface of the piles, the moisture content and concentration of water vapor decreases due to the moisture transfer to the surrounding. The newly proposed model can be used as reliable simulation tool to explore several geometry configurations and operating conditions for avoiding elevated temperature build-up and self-heating during industrial composting. Copyright © 2017 Elsevier Ltd. All rights reserved.

Parafricta Bootees and Undergarments to Reduce Skin Breakdown in People with or at Risk of Pressure Ulcers: A NICE Medical Technologies Guidance.

Science.gov (United States)

Meads, Catherine; Glover, Matthew; Dimmock, Paul; Pokhrel, Subhash

2016-12-01

As part of the development of the National Institute for Health and Care Excellence (NICE) Medical Technologies Guidance on Parafricta Bootees and Undergarments to reduce skin breakdown in people with, or at risk of, pressure ulcers, the manufacturer (APA Parafricta Ltd) submitted clinical and economic evidence, which was critically appraised by an External Assessment Centre (EAC) and subsequently used by the Medical Technologies Advisory Committee (MTAC) to develop recommendations for further research. The University of Birmingham and Brunel University, acting as a consortium, were commissioned to act as the EAC, independently appraising the submission. This article is an overview of the original evidence submitted, the EAC's findings and the final NICE guidance. Very little comparative evidence was submitted to demonstrate the effectiveness of Parafricta Bootees or Undergarments. The sponsor submitted a simple cost analysis to estimate the costs of using Parafricta in addition to current practice-in comparison with current practice alone-in hospital and community settings separately. The analysis took a National Health Service (NHS) perspective. The basis of the analysis was a previously published comparative study, which showed no statistical difference in average lengths of stay between patients who wore Parafricta Undergarments and Bootees, and those who did not. The economic model incorporated the costs of Parafricta but assumed shorter lengths of stay with Parafricta. The sponsor concluded that Parafricta was cost saving relative to the comparators. The EAC made amendments to the sponsor's analysis to correct for errors and to reflect alternative assumptions. Parafricta remained cost saving in most analyses, and the savings per prevalent case ranged from £757 in the hospital model to £3455 in the community model. All analyses were severely limited by the available data on effectiveness-in particular, a lack of good-quality comparative studies.

Design of an embedded inverse-feedforward biomolecular tracking controller for enzymatic reaction processes.

Science.gov (United States)

Foo, Mathias; Kim, Jongrae; Sawlekar, Rucha; Bates, Declan G

2017-04-06

Feedback control is widely used in chemical engineering to improve the performance and robustness of chemical processes. Feedback controllers require a 'subtractor' that is able to compute the error between the process output and the reference signal. In the case of embedded biomolecular control circuits, subtractors designed using standard chemical reaction network theory can only realise one-sided subtraction, rendering standard controller design approaches inadequate. Here, we show how a biomolecular controller that allows tracking of required changes in the outputs of enzymatic reaction processes can be designed and implemented within the framework of chemical reaction network theory. The controller architecture employs an inversion-based feedforward controller that compensates for the limitations of the one-sided subtractor that generates the error signals for a feedback controller. The proposed approach requires significantly fewer chemical reactions to implement than alternative designs, and should have wide applicability throughout the fields of synthetic biology and biological engineering.

Evaluation of the NICE mini-GRACE risk scores for acute myocardial infarction using the Myocardial Ischaemia National Audit Project (MINAP) 2003-2009: National Institute for Cardiovascular Outcomes Research (NICOR).

Science.gov (United States)

Simms, Alexander D; Reynolds, Stephanie; Pieper, Karen; Baxter, Paul D; Cattle, Brian A; Batin, Phillip D; Wilson, John I; Deanfield, John E; West, Robert M; Fox, Keith A A; Hall, Alistair S; Gale, Christopher P

2013-01-01

To evaluate the performance of the National Institute for Health and Clinical Excellence (NICE) mini-Global Registry of Acute Coronary Events (GRACE) (MG) and adjusted mini-GRACE (AMG) risk scores. Retrospective observational study. 215 acute hospitals in England and Wales. 137 084 patients discharged from hospital with a diagnosis of acute myocardial infarction (AMI) between 2003 and 2009, as recorded in the Myocardial Ischaemia National Audit Project (MINAP). Model performance indices of calibration accuracy, discriminative and explanatory performance, including net reclassification index (NRI) and integrated discrimination improvement. Of 495 263 index patients hospitalised with AMI, there were 53 196 ST elevation myocardial infarction and 83 888 non-ST elevation myocardial infarction (NSTEMI) (27.7%) cases with complete data for all AMG variables. For AMI, AMG calibration was better than MG calibration (Hosmer-Lemeshow goodness of fit test: p=0.33 vs pModel performance was reduced in patients with NSTEMI, chronic heart failure, chronic renal failure and in patients aged ≥85 years. The AMG and MG risk scores, utilised by NICE, demonstrated good performance across a range of indices using MINAP data, but performed less well in higher risk subgroups. Although indices were better for AMG, its application may be constrained by missing predictors.

State of the art and prospective of lipase-catalyzed transesterification reaction for biodiesel production

International Nuclear Information System (INIS)

Amini, Zeynab; Ilham, Zul; Ong, Hwai Chyuan; Mazaheri, Hoora; Chen, Wei-Hsin

2017-01-01

Highlights: • Enzymatic transesterification process is less energy intensive and robust. • Nano-materials are promising immobilization supports for lipase. • Packed-bed reactors are appropriate for scale-up use. • Potential recombinant, whole cell and recombinant whole cell lipases were enlisted. • Genetic engineering is a promising prospect in biodiesel area. - Abstract: The world demand for fuel as energy sources have arisen the need for generating alternatives such as biofuel. Biodiesel is a renewable fuel used particularly in diesel engines. Currently, biodiesel is mainly produced through transesterification reactions catalyzed by chemical catalysts, which produces higher fatty acid alkyl esters in shorter reaction time. Although extensive investigations on enzymatic transesterification by downstream processing were carried out, enzymatic transesterification has yet to be used in scale-up since commercial lipases are chiefly limited to the cost as well as long reaction time. While numerous lipases were studied and proven to have the high catalytic capacity, still enzymatic reaction requires more investigation. To fill this gap, finding optimal conditions for the reaction such as alcohol and oil choice, water content, reaction time and temperature through proper reaction modelling and simulations as well as the appropriate design and use of reactors for large scale production are crucial issues that need to be accurately addressed. Furthermore, lipase concentration, alternative lipase resources through whole cell technology and genetic engineering, recent immobilizing materials including nanoparticles, and the capacity of enzyme to be reused are important criteria to be neatly investigated. The present work reviews the current biodiesel feedstock, catalysis, general and novel immobilizing materials, bioreactors for enzymatic transesterification, potential lipase resources, intensification technics, and process modelling for enzymatic

Genetic Optimization Algorithm for Metabolic Engineering Revisited

Directory of Open Access Journals (Sweden)

Tobias B. Alter

2018-05-01

Full Text Available To date, several independent methods and algorithms exist for exploiting constraint-based stoichiometric models to find metabolic engineering strategies that optimize microbial production performance. Optimization procedures based on metaheuristics facilitate a straightforward adaption and expansion of engineering objectives, as well as fitness functions, while being particularly suited for solving problems of high complexity. With the increasing interest in multi-scale models and a need for solving advanced engineering problems, we strive to advance genetic algorithms, which stand out due to their intuitive optimization principles and the proven usefulness in this field of research. A drawback of genetic algorithms is that premature convergence to sub-optimal solutions easily occurs if the optimization parameters are not adapted to the specific problem. Here, we conducted comprehensive parameter sensitivity analyses to study their impact on finding optimal strain designs. We further demonstrate the capability of genetic algorithms to simultaneously handle (i multiple, non-linear engineering objectives; (ii the identification of gene target-sets according to logical gene-protein-reaction associations; (iii minimization of the number of network perturbations; and (iv the insertion of non-native reactions, while employing genome-scale metabolic models. This framework adds a level of sophistication in terms of strain design robustness, which is exemplarily tested on succinate overproduction in Escherichia coli.

Numerical analysis of knock during HCCI in a high compression ratio methanol engine based on LES with detailed chemical kinetics

International Nuclear Information System (INIS)

Zhen, Xudong; Wang, Yang

2015-01-01

Highlights: • Knock during HCCI in a high compression ratio methanol engine was modeled. • A detailed methanol mechanism was used to simulate the knocking combustion. • Compared with the SI engines, the HCCI knocking combustion burnt faster. • The reaction rate of HCO had two obvious peaks, one was positive, and another was negative. • Compared with the SI engines, the values of the reaction rates of CH 2 O, H 2 O 2 , and HO 2 were higher, and it had negative peaks. - Abstract: In this study, knock during HCCI (homogeneous charge compression ignition) was studied based on LES (large eddy simulation) with methanol chemical kinetics (84-reaction, 21-species) in a high compression ratio methanol engine. The non-knocking and knocking combustion of SI (spark ignition) and HCCI engines were compared. The results showed that the auto-ignition spots were initially occurred near the combustion chamber wall. The knocking combustion burnt faster during HCCI than SI methanol engine. The HCO reaction rate was different from SI engine, it had two obvious peaks, one was positive peak, and another was negative peak. Compared with the SI methanol engine, in addition to the concentration of HCO, the concentrations of the other intermediate products and species such as CO, OH, CH 2 O, H 2 O 2 , HO 2 were increased significantly; the reaction rates of CH 2 O, H 2 O 2 , and HO 2 had negative peaks, and whose values were several times higher than SI methanol engine

Engineering of RuMb: Toward a Green Catalyst for Carbene Insertion Reactions.

Science.gov (United States)

Wolf, Matthew W; Vargas, David A; Lehnert, Nicolai

2017-05-15

The small, stable heme protein myoglobin (Mb) was modified through cofactor substitution and mutagenesis to develop a new catalyst for carbene transfer reactions. The native heme was removed from wild-type Mb and several Mb His64 mutants (H64D, H64A, H64V), and the resulting apoproteins were reconstituted with ruthenium mesoporphyrin IX (RuMpIX). The reconstituted proteins (RuMb) were characterized by UV-vis and circular dichroism spectroscopy and were used as catalysts for the N-H insertion of aniline derivatives and the cyclopropanation of styrene derivatives. The best catalysts for each reaction were able to achieve turnover numbers (TON) up to 520 for the N-H insertion of aniline, and 350 TON for the cyclopropanation of vinyl anisole. Our results show that RuMb is an effective catalyst for N-H insertion, with the potential to further increase the activity and stereoselectivity of the catalyst in future studies. Compared to native Mb ("FeMb"), RuMb is a more active catalyst for carbene transfer reactions, which leads to both heme and protein modification and degradation and, hence, to an overall much-reduced lifetime of the catalyst. This leads to lower TONs for RuMb compared to the iron-containing analogues. Strategies to overcome this limitation are discussed. Finally, comparison is also made to FeH64DMb and FeH64AMb, which have not been previously investigated for carbene transfer reactions.

Engineering analysis of the two-stage trifluoride precipitation process

International Nuclear Information System (INIS)

Luerkens, D.w.W.

1984-06-01

An engineering analysis of two-stage trifluoride precipitation processes is developed. Precipitation kinetics are modeled using consecutive reactions to represent fluoride complexation. Material balances across the precipitators are used to model the time dependent concentration profiles of the main chemical species. The results of the engineering analysis are correlated with previous experimental work on plutonium trifluoride and cerium trifluoride

Nice Guys and Gals Finish Last? Not in Early Adolescence When Empathic, Accepted, and Popular Peers are Desirable.

Science.gov (United States)

Bower, Andrew R; Nishina, Adrienne; Witkow, Melissa R; Bellmore, Amy

2015-12-01

Little is known about attributes that elicit romantic desirability in early adolescence. The current study, with a sample of 531 sixth-grade students (45% boys) attending ethnically diverse middle schools, used a resource control framework to explore which self-reported behaviors (e.g., empathy and aggression) and peer-reported status (e.g., acceptance and perceived popularity) predict the likelihood of being considered romantically desirable (i.e., receiving at least one "crush" nomination from an opposite sex grademate). Self-reported empathy was positively associated with students' romantic desirability (primarily for those with high peer acceptance), whereas self-reported aggression on its own did not. Both peer-acceptance and popularity also were positively associated with students' romantic desirability, and aggressive behavior reduced popularity's effect. Although aggression may be integral for obtaining high peer status across cultures, prosocial behaviors were romantically valued. Our findings suggest that peer-vetted social status elicits romantic interest and during early adolescence, nice guys and gals really do not finish last.

Materials from Mussel-Inspired Chemistry for Cell and Tissue Engineering Applications.

Science.gov (United States)

Madhurakkat Perikamana, Sajeesh Kumar; Lee, Jinkyu; Lee, Yu Bin; Shin, Young Min; Lee, Esther J; Mikos, Antonios G; Shin, Heungsoo

2015-09-14

Current advances in biomaterial fabrication techniques have broadened their application in different realms of biomedical engineering, spanning from drug delivery to tissue engineering. The success of biomaterials depends highly on the ability to modulate cell and tissue responses, including cell adhesion, as well as induction of repair and immune processes. Thus, most recent approaches in the field have concentrated on functionalizing biomaterials with different biomolecules intended to evoke cell- and tissue-specific reactions. Marine mussels produce mussel adhesive proteins (MAPs), which help them strongly attach to different surfaces, even under wet conditions in the ocean. Inspired by mussel adhesiveness, scientists discovered that dopamine undergoes self-polymerization at alkaline conditions. This reaction provides a universal coating for metals, polymers, and ceramics, regardless of their chemical and physical properties. Furthermore, this polymerized layer is enriched with catechol groups that enable immobilization of primary amine or thiol-based biomolecules via a simple dipping process. Herein, this review explores the versatile surface modification techniques that have recently been exploited in tissue engineering and summarizes polydopamine polymerization mechanisms, coating process parameters, and effects on substrate properties. A brief discussion of polydopamine-based reactions in the context of engineering various tissue types, including bone, blood vessels, cartilage, nerves, and muscle, is also provided.

Probing the role of Skyrme interactions on the fission dynamics of the {sup 6}Li + {sup 238}U reaction

Energy Technology Data Exchange (ETDEWEB)

Sharma, Ishita; Kumar, Raj; Sharma, Manoj K. [Thapar University, School of Physics and Materials Science, Patiala (India)

2017-06-15

The performance of selected five Skyrme forces (out of a set of 240), tested by Dutra et al., is analyzed in view of fusion-fission dynamics. These forces are assumed to perform better for neutron-rich systems, so the choice of the reaction is accordingly made by opting for a neutron-rich target in {sup 6}Li + {sup 238}U reaction. This reaction is diagnosed further in reference to fusion hindrance within the dynamical approach of the cluster-decay model (DCM). In order to reduce the computational time, three Skyrme forces are figured out with the criteria that these forces cover the barrier characteristics of the remaining two forces as well. The fission cross-sections are successfully addressed at low energies for the {sup 6}Li + {sup 238}U reaction. However, at relatively higher energies, the excitation functions show theoretical suppression with respect to experimental data, which may be associated with the possible existence of incomplete fusion (ICF). For ICF, we have considered that the {sup 6}Li broke into {sup 4}He + {sup 2}H, as mentioned in the experimental work. The calculations of ICF are carried out for the {sup 4}He + {sup 238}U reaction with the selected Skyrme forces at E{sub c.m.} = 26.20 and 27.51 MeV. These forces address the data nicely for the compound nucleus (CN) as well as ICF processes. Here, the NRAPR force seems to require lesser barrier modification as compared to the other forces, therefore it can be used as an alternate choice for calculating the interaction potential. Additionally, the prediction of cross-sections at lower energies has been done with DCM using the NRAPR force. The l-dependent % barrier modification of the Skyrme forces undertaken is also worked out in reference to fusion hindrance at below barrier energies. (orig.)

A quantitative evaluation of the public response to climate engineering

Science.gov (United States)

Wright, Malcolm J.; Teagle, Damon A. H.; Feetham, Pamela M.

2014-02-01

Atmospheric greenhouse gas concentrations continue to increase, with CO2 passing 400 parts per million in May 2013. To avoid severe climate change and the attendant economic and social dislocation, existing energy efficiency and emissions control initiatives may need support from some form of climate engineering. As climate engineering will be controversial, there is a pressing need to inform the public and understand their concerns before policy decisions are taken. So far, engagement has been exploratory, small-scale or technique-specific. We depart from past research to draw on the associative methods used by corporations to evaluate brands. A systematic, quantitative and comparative approach for evaluating public reaction to climate engineering is developed. Its application reveals that the overall public evaluation of climate engineering is negative. Where there are positive associations they favour carbon dioxide removal (CDR) over solar radiation management (SRM) techniques. Therefore, as SRM techniques become more widely known they are more likely to elicit negative reactions. Two climate engineering techniques, enhanced weathering and cloud brightening, have indistinct concept images and so are less likely to draw public attention than other CDR or SRM techniques.

Metabolic engineering of free-energy (ATP) conserving reactions in Saccharomyces cerevisiae

NARCIS (Netherlands)

De Kok, S.

2012-01-01

Metabolic engineering – the improvement of cellular activities by manipulation of enzymatic, transport and regulatory functions of the cell – has enabled the industrial production of a wide variety of biological molecules from renewable resources. Microbial production of fuels and chemicals thereby

Statics formulas and problems : engineering mechanics 1

CERN Document Server

Gross, Dietmar; Wriggers, Peter; Schröder, Jörg; Müller, Ralf

2017-01-01

This book contains the most important formulas and more than 160 completely solved problems from Statics. It provides engineering students material to improve their skills and helps to gain experience in solving engineering problems. Particular emphasis is placed on finding the solution path and formulating the basic equations. Topics include: - Equilibrium - Center of Gravity, Center of Mass, Centroids - Support Reactions - Trusses - Beams, Frames, Arches - Cables - Work and Potential Energy - Static and Kinetic Friction - Moments of Inertia.

Chemical engineering and thermodynamics using Mat lab

International Nuclear Information System (INIS)

Kim Heon; Kim, Moon Gap; Lee, Hak Yeong; Yeo, Yeong Gu; Ham, Seong Won

2002-02-01

This book consists of twelve chapters and four appendixes about chemical engineering and thermodynamics using Mat lab, which deals with introduction, energy budget, entropy, thermodynamics process, generalization on any fluid, engineering equation of state for PVT properties, deviation of the function, phase equilibrium of pure fluid, basic of multicomponent, phase equilibrium of compound by state equation, activity model and reaction system. The appendixes is about summary of computer program, related mathematical formula and material property of pure component.

Genetic testing for BRCA1: effects of a randomised study of knowledge provision on interest in testing and long term test uptake; implications for the NICE guidelines.

Science.gov (United States)

Hall, Julia; Gray, Susan; A'Hern, Roger; Shanley, Susan; Watson, Maggie; Kash, Kathryn; Croyle, Robert; Eeles, Rosalind

2009-01-01

Interest in searching for mutations in BRCA1 and BRCA2 is high. Knowledge regarding these genes and the advantages and limitations of genetic testing is limited. It is unknown whether increasing knowledge about breast cancer genetic testing alters interest in testing. Three hundred and seventy nine women (260 with a family history of breast cancer; 119 with breast cancer) from The Royal Marsden NHS Foundation Trust were randomised to receive or not receive written educational information on cancer genetics. A questionnaire was completed assessing interest in BRCA1 testing and knowledge on breast cancer genetics and screening. Actual uptake of BRCA1 testing is reported with a six year follow-up. Eighty nine percent of women at risk of breast cancer and 76% of women with breast cancer were interested in BRCA1 testing (P testing, the families of 66% of the at risk group and 13% of the women with breast cancer would be eligible for testing (probability of BRCA1 mutation >or=20%). Within six years of randomisation, genetic testing was actually undertaken on 12 women, only 10 of whom would now be eligible, on the NICE guidelines. There is strong interest in BRCA1 testing. Despite considerable ignorance of factors affecting the inheritance of breast cancer, education neither reduced nor increased interest to undergo testing. The NICE guidelines successfully triage those with a high breast cancer risk to be managed in cancer genetics clinics.

Direct synthesis of bimetallic PtCo mesoporous nanospheres as efficient bifunctional electrocatalysts for both oxygen reduction reaction and methanol oxidation reaction

Science.gov (United States)

Wang, Hongjing; Yu, Hongjie; Li, Yinghao; Yin, Shuli; Xue, Hairong; Li, Xiaonian; Xu, You; Wang, Liang

2018-04-01

The engineering of electrocatalysts with high performance for cathodic and/or anodic catalytic reactions is of great urgency for the development of direct methanol fuel cells. Pt-based bimetallic alloys have recently received considerable attention in the field of fuel cells because of their superior catalytic performance towards both fuel molecule electro-oxidation and oxygen reduction. In this work, bimetallic PtCo mesoporous nanospheres (PtCo MNs) with uniform size and morphology have been prepared by a one-step method with a high yield. The as-made PtCo MNs show superior catalytic activities for both oxygen reduction reaction and methanol oxidation reaction relative to Pt MNs and commercial Pt/C catalyst, attributed to their mesoporous structure and bimetallic composition.

Wave Packet Based Statistical Approach to Complex-Forming Reactions

Energy Technology Data Exchange (ETDEWEB)

Guo, Hua [Univ. of New Mexico, Albuquerque, NM (United States). Dept. of Chemistry and Chemical Biology

2017-12-06

Combustion represents a key chemical process in energy consumption in modern societies and a clear and comprehensive understanding of the elemental reactions in combustion is of great importance to a number of challenging areas such as engine efficiency and environmental protection. In this award, we proposed to develop new theoretical tools to understand elemental chemical processes in combustion environments. With the support of this DOE grant, we have made significant advances in developing new and more efficient and accurate algorithms to characterize reaction dynamics.

Optimization of a Chemical Reaction Train

Directory of Open Access Journals (Sweden)

Bahar Sansar

2010-01-01

Full Text Available This project consists of the optimization of a chemical reactor train. The reactor considered here is the continuous stirred tank reactor (CSTR, one of the reactor models used in engineering. Given the design equation for the CSTR and the cost function for a reactor, the following values are determined; the optimum number of reactors in the reaction train, the volume of each reactor and the total cost.

Who Would Have Thought? The Story of a Food Engineer.

Science.gov (United States)

Lund, Daryl B

2017-02-28

Food engineering is a hybrid of food science and an engineering science, like chemical engineering in my particular case, resulting in the application of chemical engineering principles to food systems and their constituents. With the complexity of food and food processing, one generally narrows his or her interests, and my primary interests were in the kinetics of reactions important in foods, thermal processing, deposition of unwanted materials from food onto heated surfaces (fouling), and microwave heat transfer in baking. This review describes how I developed an interest in these topics and the contributions I have hopefully made to understanding food and to the application of engineering.

Characterizing multistationarity regimes in biochemical reaction networks.

Directory of Open Access Journals (Sweden)

Irene Otero-Muras

Full Text Available Switch like responses appear as common strategies in the regulation of cellular systems. Here we present a method to characterize bistable regimes in biochemical reaction networks that can be of use to both direct and reverse engineering of biological switches. In the design of a synthetic biological switch, it is important to study the capability for bistability of the underlying biochemical network structure. Chemical Reaction Network Theory (CRNT may help at this level to decide whether a given network has the capacity for multiple positive equilibria, based on their structural properties. However, in order to build a working switch, we also need to ensure that the bistability property is robust, by studying the conditions leading to the existence of two different steady states. In the reverse engineering of biological switches, knowledge collected about the bistable regimes of the underlying potential model structures can contribute at the model identification stage to a drastic reduction of the feasible region in the parameter space of search. In this work, we make use and extend previous results of the CRNT, aiming not only to discriminate whether a biochemical reaction network can exhibit multiple steady states, but also to determine the regions within the whole space of parameters capable of producing multistationarity. To that purpose we present and justify a condition on the parameters of biochemical networks for the appearance of multistationarity, and propose an efficient and reliable computational method to check its satisfaction through the parameter space.

Complement activation cascade triggered by PEG-PL engineered nanomedicines and carbon nanotubes: The challenges ahead

DEFF Research Database (Denmark)

Moghimi, S.M.; Andersen, Alina Joukainen; Hashemi, S.H.

2010-01-01

reactions to certain PEG-PL engineered nanomedicines in both experimental animals and man. These reactions are classified as pseudoallergy and may be associated with cardiopulmonary disturbance and other related symptoms of anaphylaxis. Recent studies suggest that complement activation may be a contributing......, but not a rate limiting factor, in eliciting hypersensitivity reactions to such nanomedicines in sensitive individuals. This is rather surprising since PEGylated structures are generally assumed to suppress protein adsorption and blood opsonization events including complement. Here, we examine the molecular...... basis of complement activation by PEG-PL engineered nanomedicines and carbon nanotubes and discuss the challenges ahead....

Non-Toxic Orbital Maneuvering System Engine Development

Science.gov (United States)

Green, Christopher; Claflin, Scott; Maeding, Chris; Butas, John

1999-01-01

Recent results using the Aestus engine operated with LOx/ethanol propellant are presented. An experimental program at Rocketdyne Propulsion and Power is underway to adapt this engine for the Boeing Reusable Space Systems Division non-toxic Orbital Maneuvering System/Reaction control System (OMS/RCS) system. Daimler-Chrysler Aerospace designed the Aestus as an nitrogen tetroxide/monomethyl hydrazine (NTO/MMH) upper-stage engine for the Ariane 5. The non-toxic OMS/RCS system's preliminary design requires a LOx/ethanol (O2/C2H5OH) engine that operates with a mixture ratio of 1.8, a specific impulse of 323 seconds, and fits within the original OMS design envelope. This paper describes current efforts to meet these requirements including, investigating engine performance using LOx/ethanol, developing the en-ine system sizing package, and meeting the vehicle operation parameters. Data from hot-fire testing are also presented and discussed.

Use of a GDMS for high-energy reaction data

International Nuclear Information System (INIS)

Moorhead, W.G.

1978-01-01

At CERN, data on high-energy reactions is being compiled using a Generalized Data Management System. The GDMS is a stand-alone system designed for administrative and engineering applications. The Data Base at present contains about 20,000 cross-section values, each linked to a description of the corresponding reaction, and the publication from which the value was derived. The immediate objective is to produce the widely circulated Compilation Reports, and the standard Report Generator of the GDMS is being used for this. Direct retrieval is also possible

Vicher: A Virtual Reality Based Educational Module for Chemical Reaction Engineering.

Science.gov (United States)

Bell, John T.; Fogler, H. Scott

1996-01-01

A virtual reality application for undergraduate chemical kinetics and reactor design education, Vicher (Virtual Chemical Reaction Model) was originally designed to simulate a portion of a modern chemical plant. Vicher now consists of two programs: Vicher I that models catalyst deactivation and Vicher II that models nonisothermal effects in…

A Study on Catalysis and Electrolyte Engineering for H2/O2 Electrochemical Reactions

KAUST Repository

Shinagawa, Tatsuya

2016-09-27

Water electrolysis conjugated with renewable energy sources potentially realizes a sustainable society. Although the current electrolyzers operate at extreme pH to maximize the electrolysis efficiency, near-neutral pH conditions may optimize the overall system operation when conjugated with renewable energy sources. In this context, a study on the electrolysis in the mild conditions is essential. The dissertation investigates the water electrolysis in various conditions, with a particular focus placed on milder conditions, to rationalize and improve its performance. Microkinetic analysis was performed for the cathodic half-reaction in conjugation with mass transport evaluation using various electrode materials. The analysis revealed a significant universal influence of electrolyte properties on the reaction performances at near-neutral pH. Investigation of the associated electrolyte properties (ion size, viscosity and activity/fugacity) rationally optimized the reaction conditions. Together with the separately performed studies on the anodic half-reaction and system configurations, the finding was successfully transferred to electrocatalytic and solar-driven water splitting systems. The presented herein is a fundamental yet crucial aspect of water electrolysis, which can advance the water electrolysis for the future.

Stable and efficient nitrogen-containing-carbon based electrocatalysts for reactions in energy conversion systems.

Science.gov (United States)

Wang, Sicong; Teng, Zhenyuan; Wang, Chengyin; Wang, Guoxiu

2018-05-17

High activity and stability are crucial for practical electrocatalysts used for reactions in fuel cells, metal-air batteries and water electrolysis including ORR, HER, OER and oxidation reactions of formic acid and alcohols. N-C based electrocatalysts have shown promising prospects for catalyzing these reactions, however, there is no systematic review for strategies toward engineering active and stable N-C based electrocatalysts reported by far. Herein, a comprehensive comparison of recently reported N-C based electrocatalysts regarding both electrocatalytic activity and long-term stability is presented. In the first part of this review, relationships between electrocatalytic reactions and element selections for modifying N-C based materials are discussed. Afterwards, synthesis methods for N-C based electrocatalysts are summarized, and synthetic strategies for highly stable N-C based electrocatalysts are presented. Multiple tables containing data on crucial parameters for both electrocatalytic activity and stability are displayed in this review. Finally, constructing M-Nx moieties is proposed as the most promising engineering strategy for stable N-C based electrocatalysts. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Engineering microbial electrocatalysis for chemical and fuel production.

Science.gov (United States)

Rosenbaum, Miriam A; Henrich, Alexander W

2014-10-01

In many biotechnological areas, metabolic engineering and synthetic biology have become core technologies for biocatalyst development. Microbial electrocatalysis for biochemical and fuel production is still in its infancy and reactions rates and the product spectrum are currently very low. Therefore, molecular engineering strategies will be crucial for the advancement and realization of many new bioproduction routes using electroactive microorganisms. The complex and unresolved biochemistry and physiology of extracellular electron transfer and the lack of molecular tools for these new non-model hosts for genetic engineering constitute the major challenges for this effort. This review is providing an insight into the current status, challenges and promising approaches of pathway engineering for microbial electrocatalysis. Copyright © 2014 Elsevier Ltd. All rights reserved.

Optical Excitation of Carbon Nanotubes Drives Localized Diazonium Reactions

Science.gov (United States)

2016-01-01

Covalent chemistries have been widely used to modify carbon nanomaterials; however, they typically lack the precision and efficiency required to directly engineer their optical and electronic properties. Here, we show, for the first time, that visible light which is tuned into resonance with carbon nanotubes can be used to drive their functionalization by aryldiazonium salts. The optical excitation accelerates the reaction rate 154-fold (±13) and makes it possible to significantly improve the efficiency of covalent bonding to the sp2 carbon lattice. Control experiments suggest that the reaction is dominated by a localized photothermal effect. This light-driven reaction paves the way for precise nanochemistry that can directly tailor carbon nanomaterials at the optical and electronic levels. PMID:27588432

Biocatalysts: application and engineering for industrial purposes.

Science.gov (United States)

Jemli, Sonia; Ayadi-Zouari, Dorra; Hlima, Hajer Ben; Bejar, Samir

2016-01-01

Enzymes are widely applied in various industrial applications and processes, including the food and beverage, animal feed, textile, detergent and medical industries. Enzymes screened from natural origins are often engineered before entering the market place because their native forms do not meet the requirements for industrial application. Protein engineering is concerned with the design and construction of novel enzymes with tailored functional properties, including stability, catalytic activity, reaction product inhibition and substrate specificity. Two broad approaches have been used for enzyme engineering, namely, rational design and directed evolution. The powerful and revolutionary techniques so far developed for protein engineering provide excellent opportunities for the design of industrial enzymes with specific properties and production of high-value products at lower production costs. The present review seeks to highlight the major fields of enzyme application and to provide an updated overview on previous protein engineering studies wherein natural enzymes were modified to meet the operational conditions required for industrial application.

Fission dynamics of 240Cf* formed in 34,36S induced reactions

Directory of Open Access Journals (Sweden)

Jain Deepika

2015-01-01

Full Text Available We have studied the entrance channel effects in the decay of Compound nucleus 240Cf* formed in 34S+206Pb and 36S+204Pb reactions by using energy density dependent nuclear proximity potential in the framework of dynamical cluster-decay model (DCM. At different excitation energies, the fragmentation potential and preformation probability of decaying fragments are almost identical for both the entrance channels, which seem to suggest that decay is independent of its formation and entrance channel excitation energy. It is also observed that, with inclusion of deformation effects upto quadrupole within the optimum orientation approach, the fragmentation path governing potential energy surfaces gets modified significantly. Beside this, the fission mass distribution of Cf* isotopes is also investigated. The calculated fission cross-sections using SIII force for both the channels find nice agreement with the available experimental data for deformed choice of fragments, except at higher energies. In addition to this, the comparative analysis with Blocki based nuclear attraction is also worked out. It is observed that Blocki proximity potential accounts well for the CN decay at all energies whereas the use of EDF based nuclear potential suggests the presence of some non-compound nucleus process (such as quasi-fission (qf at higher energies.

In Situ Generation of Pd-Pt Core-Shell Nanoparticles on Reduced Graphene Oxide (Pd@Pt/rGO) Using Microwaves: Applications in Dehalogenation Reactions and Reduction of Olefins.

Science.gov (United States)

Goswami, Anandarup; Rathi, Anuj K; Aparicio, Claudia; Tomanec, Ondrej; Petr, Martin; Pocklanova, Radka; Gawande, Manoj B; Varma, Rajender S; Zboril, Radek

2017-01-25

Core-shell nanocatalysts are a distinctive class of nanomaterials with varied potential applications in view of their unique structure, composition-dependent physicochemical properties, and promising synergism among the individual components. A one-pot microwave (MW)-assisted approach is described to prepare the reduced graphene oxide (rGO)-supported Pd-Pt core-shell nanoparticles, (Pd@Pt/rGO); spherical core-shell nanomaterials (∼95 nm) with Pd core (∼80 nm) and 15 nm Pt shell were nicely distributed on the rGO matrix in view of the choice of reductant and reaction conditions. The well-characterized composite nanomaterials, endowed with synergism among its components and rGO support, served as catalysts in aromatic dehalogenation reactions and for the reduction of olefins with high yield (>98%), excellent selectivity (>98%) and recyclability (up to 5 times); both Pt/rGO and Pd/rGO and even their physical mixtures showed considerably lower conversions (20 and 57%) in dehalogenation of 3-bromoaniline. Similarly, in the reduction of styrene to ethylbenzene, Pd@Pt core-shell nanoparticles (without rGO support) possess considerably lower conversion (60%) compared to Pd@Pt/rGO. The mechanism of dehalogenation reactions with Pd@Pt/rGO catalyst is discussed with the explicit premise that rGO matrix facilitates the adsorption of the reducing agent, thus enhancing its local concentration and expediting the hydrazine decomposition rate. The versatility of the catalyst has been validated via diverse substrate scope for both reduction and dehalogenation reactions.

Tuning the two-dimensional electron liquid at oxide interfaces by buffer-layer-engineered redox reactions

DEFF Research Database (Denmark)

Chen, Yunzhong; Green, Robert J.; Sutarto, Ronny

2017-01-01

Polar discontinuities and redox reactions provide alternative paths to create two-dimensional electron liquids (2DELs) at oxide interfaces. Herein, we report high mobility 2DELs at interfaces involving SrTiO3 (STO) achieved using polar La7/8Sr1/8MnO3 (LSMO) buffer layers to manipulate both...... polarities and redox reactions from disordered overlayers grown at room temperature. Using resonant x-ray reflectometry experiments, we quantify redox reactions from oxide overlayers on STO as well as polarity induced electronic reconstruction at epitaxial LSMO/STO interfaces. The analysis reveals how...... these effects can be combined in a STO/LSMO/disordered film trilayer system to yield high mobility modulation doped 2DELs, where the buffer layer undergoes a partial transformation from perovskite to brownmillerite structure. This uncovered interplay between polar discontinuities and redox reactions via buffer...

Markovian dynamics on complex reaction networks

Energy Technology Data Exchange (ETDEWEB)

Goutsias, J., E-mail: goutsias@jhu.edu; Jenkinson, G., E-mail: jenkinson@jhu.edu

2013-08-10

Complex networks, comprised of individual elements that interact with each other through reaction channels, are ubiquitous across many scientific and engineering disciplines. Examples include biochemical, pharmacokinetic, epidemiological, ecological, social, neural, and multi-agent networks. A common approach to modeling such networks is by a master equation that governs the dynamic evolution of the joint probability mass function of the underlying population process and naturally leads to Markovian dynamics for such process. Due however to the nonlinear nature of most reactions and the large size of the underlying state-spaces, computation and analysis of the resulting stochastic population dynamics is a difficult task. This review article provides a coherent and comprehensive coverage of recently developed approaches and methods to tackle this problem. After reviewing a general framework for modeling Markovian reaction networks and giving specific examples, the authors present numerical and computational techniques capable of evaluating or approximating the solution of the master equation, discuss a recently developed approach for studying the stationary behavior of Markovian reaction networks using a potential energy landscape perspective, and provide an introduction to the emerging theory of thermodynamic analysis of such networks. Three representative problems of opinion formation, transcription regulation, and neural network dynamics are used as illustrative examples.

Markovian dynamics on complex reaction networks

International Nuclear Information System (INIS)

Goutsias, J.; Jenkinson, G.

2013-01-01

Complex networks, comprised of individual elements that interact with each other through reaction channels, are ubiquitous across many scientific and engineering disciplines. Examples include biochemical, pharmacokinetic, epidemiological, ecological, social, neural, and multi-agent networks. A common approach to modeling such networks is by a master equation that governs the dynamic evolution of the joint probability mass function of the underlying population process and naturally leads to Markovian dynamics for such process. Due however to the nonlinear nature of most reactions and the large size of the underlying state-spaces, computation and analysis of the resulting stochastic population dynamics is a difficult task. This review article provides a coherent and comprehensive coverage of recently developed approaches and methods to tackle this problem. After reviewing a general framework for modeling Markovian reaction networks and giving specific examples, the authors present numerical and computational techniques capable of evaluating or approximating the solution of the master equation, discuss a recently developed approach for studying the stationary behavior of Markovian reaction networks using a potential energy landscape perspective, and provide an introduction to the emerging theory of thermodynamic analysis of such networks. Three representative problems of opinion formation, transcription regulation, and neural network dynamics are used as illustrative examples

Evaluation of Biodiesel Production, Engine Performance, and Emissions

Science.gov (United States)

Gürü, Metin; Keskïn, Ali

2016-08-01

Nowadays, to decrease environmental pollution and dependence on fossil-based fuels, research on alternative renewable energy sources has been increasing. One such renewable energy source is biodiesel, which is used as an alternative fuel for diesel engines. Biodiesel is renewable, nontoxic, biodegradable, and environmentally friendly. Biodiesel is domestically produced from vegetable oil (edible or nonedible), animal fat, and used cooking oils. In the biodiesel production process, oil or fat undergoes transesterification reaction through use of simple alcohols such as methanol, ethanol, propanol, butanol, etc. Use of methanol is most feasible because of its low cost, and physical and chemical advantages. Acid catalysis, alkali catalysis, and enzyme catalysis are usually used to improve the reaction rate and yield. Glycerol is a byproduct of the reaction and can be used as an industrial raw material. In this study, biodiesel production methods (direct use, pyrolysis, microemulsion, transesterification, supercritical processes, ultrasound- assisted, and microwave-assisted) and types of catalyst (homogeneous, heterogeneous, and enzyme) have been evaluated and compared. In addition, the effects of biodiesel and its blends on diesel engine performance and exhaust emissions are described and reviewed.

Evaluation of immunocompatibility of tissue-engineered periosteum

Energy Technology Data Exchange (ETDEWEB)

Zhao Lin; Wang Shuanke; Xia Yayi; Liu Jia; He Jing; Wang Xin [Orthopaedic Institute of the 2nd Hospital of Lanzhou University, 80 CuiYingMen, ChengGuan District, Lanzhou City, 730030 (China); Zhao Junli, E-mail: bonezl@qq.com [Department of Nephrology, the 2nd Hospital of Lanzhou University, 80 CuiYingMen, ChengGuan District, Lanzhou City, 730030 (China)

2011-02-15

Tissue-engineered periosteum (TEP) and 'intramembranous ossification' may be an alternative approach to bone tissue engineering. In the previous study we attained successful bone defect reparation with homemade TEP in an allogenic rabbit model. But its allogenic immunocompatibility remained unknown. In this study TEP was constructed by seeding osteogenically induced mesenchymal stem cells of rabbit onto porcine small intestinal submucosa (SIS). A mixed lymphocyte reaction (MLR) was applied to evaluate the in vitro immunogenicity. The ratio of CD4{sup +}/CD8{sup +} T-lymphocytes was tested kinetically to evaluate the systematic reaction of the TEP allograft, and a histological examination was performed to investigate local inflammation and ectopic osteogenesis. MLR indicated that TEP had a higher in vitro immunostimulation than SIS (p < 0.05). The ratios of CD4{sup +}/CD8{sup +} lymphocytes increased in both TEP and SIS implanted groups in 2 weeks, followed by a decrease to a normal level from 2 to 4 weeks. Histological examination revealed modest lymphocyte infiltration for no more than 2 weeks. Moreover, subcutaneous ectopic ossification was observed in TEP allograft animals (8/12). Our findings imply that TEP has a certain immune reaction for the allograft, but it is not severe enough to impact osteogenesis in the allogenic rabbit model.

Carbon-13 Labeling Used to Probe Cure and Degradation Reactions of High- Temperature Polymers

Science.gov (United States)

Meador, Mary Ann B.; Johnston, J. Christopher

1998-01-01

High-temperature, crosslinked polyimides are typically insoluble, intractible materials. Consequently, in these systems it has been difficult to follow high-temperature curing or long-term degradation reactions on a molecular level. Selective labeling of the polymers with carbon-13, coupled with solid nuclear magnetic resonance spectrometry (NMR), enables these reactions to be followed. We successfully employed this technique to provide insight into both curing and degradation reactions of PMR-15, a polymer matrix resin used extensively in aircraft engine applications.

Effects of the starch indicator on the buoyantly unstable iodate-arsenous acid reaction front

Czech Academy of Sciences Publication Activity Database

Šebestíková, Lenka; Šimčík, Miroslav; Růžička, Marek

2017-01-01

Roč. 2, č. 24 (2017), s. 7141-7149 ISSN 2365-6549 R&D Projects: GA ČR GAP105/10/0919 Institutional support: RVO:67985874 ; RVO:67985858 Keywords : autocatalysis * exchange interaction * iodine * liquids * reaction mechanism Subject RIV: BK - Fluid Dynamics; CI - Industrial Chemistry, Chemical Engineering (UCHP-M) OBOR OECD: Fluids and plasma physics (including surface physics); Chemical process engineering (UCHP-M)

TRITON: graphic software for rational engineering of enzymes.

Science.gov (United States)

Damboský, J; Prokop, M; Koca, J

2001-01-01

Engineering of the catalytic properties of enzymes requires knowledge about amino acid residues interacting with the transition state of the substrate. TRITON is a graphic software package for modelling enzymatic reactions for the analysis of essential interactions between the enzyme and its substrate and for in silico construction of protein mutants. The reactions are modelled using semi-empirical quantum-mechanic methods and the protein mutants are constructed by homology modelling. The users are guided through the calculation and data analysis by wizards.

NICE-Accredited Commissioning Guidance for Weight Assessment and Management Clinics: a Model for a Specialist Multidisciplinary Team Approach for People with Severe Obesity.

Science.gov (United States)

Welbourn, Richard; Dixon, John; Barth, Julian H; Finer, Nicholas; Hughes, Carly A; le Roux, Carel W; Wass, John

2016-03-01

Despite increasing prevalence of obesity, no country has successfully implemented comprehensive pathways to provide advice to all the severely obese patients that seek treatment. We aimed to formulate pathways for referral into and out of weight assessment and management clinics (WAMCs) that include internal medicine/primary care physicians as part of a multidisciplinary team that could provide specialist advice and interventions, including referral for bariatric surgery. Using a National Institute of Health and Care Excellence (NICE)-accredited process, a Guidance Development Group conducted a literature search identifying existing WAMCs. As very few examples of effective structures and clinical pathways existed, the current evidence base for optimal assessment and management of bariatric surgery patients was used to reach a consensus. The model we describe could be adopted internationally by health services to manage severely obese patients.

Numerical investigation of ethanol fuelled HCCI engine using stochastic reactor model. Part 1: Development of a new reduced ethanol oxidation mechanism

International Nuclear Information System (INIS)

Maurya, Rakesh Kumar; Akhil, Nekkanti

2016-01-01

Highlights: • Stochastic reactor model used for numerical study of HCCI engine. • New reduced oxidation mechanism with NOx developed (47 species and 272 reactions). • Mechanism predicts cylinder pressure and heat release with sufficient accuracy. • Mechanism was able to capture the trend in NO x emission with sufficient accuracy. - Abstract: Ethanol is considered a potential biofuel for internal combustion engines. In this study, homogeneous charge compression ignition (HCCI) simulations of ethanol engine experiments were performed using stochastic reactor model (SRM). Detailed ethanol oxidation mechanism is developed by including NO x reaction in existing detailed oxidation mechanism with 57 species and 383 reactions. Detailed ethanol mechanism with NO x used in this study contains 76 species and 495 reactions. This mechanism was reduced by direct relation graph (DRG) method, which was validated with the experimental results. Existing Lu’s 40-species skeletal mechanism with NO formation were also compared with detailed and reduced mechanisms for predicting maximum cylinder pressure, maximum heat release rate and crank angle position of maximum cylinder pressure in HCCI engine. Reduced mechanism developed in this study exhibited the best resemblance with the experimental data. This reduced mechanism was also validated by measured engine cylinder pressure curves and measured ignition delays in constant volume reactors. The results showed that reduced mechanism is capable of predicting HCCI engine performance parameters with sufficient accuracy. Sensitivity analysis was conducted to determine the influential reactions in ethanol oxidation. Results also show that detailed and reduced mechanism was able to predict NO x emission in good agreement with the corresponding experimental data.

Microwave Discharge Ion Engines onboard Hayabusa Asteroid Explorer

International Nuclear Information System (INIS)

Kuninaka, Hitoshi

2008-01-01

The Hayabusa spacecraft rendezvoused with the asteroid Itokawa in 2005 after the powered flight in the deep space by the μl0 cathode-less electron cyclotron resonance ion engines. Though the spacecraft was seriously damaged after the successful soft-landing and lift-off, the xenon cold gas jets from the ion engines rescued it. New attitude stabilization method using a single reaction wheel, the ion beam jets, and the photon pressure was established and enabled the homeward journey from April 2007 aiming the Earth return on 2010. The total accumulated operational time of the ion engines reaches 31,400 hours at the end of 2007. One of four thrusters achieved 13,400-hour space operation

Production of proton-rich nuclei around Z = 84-90 in fusion-evaporation reactions

Energy Technology Data Exchange (ETDEWEB)

Chen, Peng-Hui [Chinese Academy of Sciences, Institute of Modern Physics, Lanzhou (China); Lanzhou University, School of Nuclear Science and Technology, Lanzhou (China); University of Chinese Academy of Sciences, Beijing (China); Feng, Zhao-Qing; Li, Jun-Qing; Jin, Gen-Ming [Chinese Academy of Sciences, Institute of Modern Physics, Lanzhou (China); Niu, Fei [Chinese Academy of Sciences, Institute of Modern Physics, Lanzhou (China); Henan Normal University, Institute of Particle and Nuclear Physics, Xinxiang (China); Guo, Ya-Fei [Chinese Academy of Sciences, Institute of Modern Physics, Lanzhou (China); Lanzhou University, School of Nuclear Science and Technology, Lanzhou (China); Zhang, Hong-Fei [Lanzhou University, School of Nuclear Science and Technology, Lanzhou (China)

2017-05-15

Within the framework of the dinuclear system model, production cross sections of proton-rich nuclei with charged numbers of Z = 84-90 are investigated systematically. Possible combinations with the {sup 28}Si, {sup 32}S, {sup 40}Ar bombarding the target nuclides {sup 165}Ho, {sup 169}Tm, {sup 170-174}Yb, {sup 175,176}Lu, {sup 174,} {sup 176-180}Hf and {sup 181}Ta are analyzed thoroughly. The optimal excitation energies and evaporation channels are proposed to produce the proton-rich nuclei. The systems are feasible to be constructed in experiments. It is found that the neutron shell closure of N = 126 is of importance during the evaporation of neutrons. The experimental excitation functions in the {sup 40}Ar induced reactions can be nicely reproduced. The charged particle evaporation is comparable with neutrons in cooling the excited proton-rich nuclei, in particular for the channels with α and proton evaporation. The production cross section increases with the mass asymmetry of colliding systems because of the decrease of the inner fusion barrier. The channels with pure neutron evaporation depend on the isotopic targets. But it is different for the channels with charged particles and more sensitive to the odd-even effect. (orig.)

A Reaction Database for Small Molecule Pharmaceutical Processes Integrated with Process Information

Directory of Open Access Journals (Sweden)

Emmanouil Papadakis

2017-10-01

Full Text Available This article describes the development of a reaction database with the objective to collect data for multiphase reactions involved in small molecule pharmaceutical processes with a search engine to retrieve necessary data in investigations of reaction-separation schemes, such as the role of organic solvents in reaction performance improvement. The focus of this reaction database is to provide a data rich environment with process information available to assist during the early stage synthesis of pharmaceutical products. The database is structured in terms of reaction classification of reaction types; compounds participating in the reaction; use of organic solvents and their function; information for single step and multistep reactions; target products; reaction conditions and reaction data. Information for reactor scale-up together with information for the separation and other relevant information for each reaction and reference are also available in the database. Additionally, the retrieved information obtained from the database can be evaluated in terms of sustainability using well-known “green” metrics published in the scientific literature. The application of the database is illustrated through the synthesis of ibuprofen, for which data on different reaction pathways have been retrieved from the database and compared using “green” chemistry metrics.

Reaction of Sulfuric Acid in Lube Oil: Implications for Large Two-Stroke Diesel Engines

DEFF Research Database (Denmark)

Lejre, Kasper Hartvig; Kiil, Søren; Glarborg, Peter

2017-01-01

Slow-steaming operation and an increased pressure in the combustion chamber have contributed to increased sulfuric acid (H2SO4) condensation on the cylinder liners in large two-stroke marine diesel engines, thus causing increased corrosion wear. To cope with this, lube oils are formulated...... of CaCO3 compared to the condensed H2SO4. The observed corrosion wear in large two-stroke marine diesel engines could consequently be attributed to local molar excess of H2SO4 compared to CaCO3 reverse micelles on the cylinder liners....

Metabolic engineering: the ultimate paradigm for continuous pharmaceutical manufacturing.

Science.gov (United States)

Yadav, Vikramaditya G; Stephanopoulos, Gregory

2014-07-01

Research and development (R&D) expenditures by pharmaceutical companies doubled over the past decade, yet candidate attrition rates and development times rose markedly during this period. Understandably, companies have begun downsizing their pipelines and diverting investments away from R&D in favor of manufacturing. It is estimated that transitioning to continuous manufacturing could enable companies to compete for a share in emerging markets. Accordingly, the model for continuous manufacturing that has emerged commences with the conversion of late-stage intermediates into the active pharmaceutical ingredient (API) in a series of continuous flow reactors, followed by continuous solid processing to form finished tablets. The use of flow reactions for API synthesis will certainly generate purer products at higher yields in shorter times compared to equivalent batch reactions. However, transitioning from batch to flow configuration simply alleviates transport limitations within the reaction milieu. As the catalogue of reactions used in flow syntheses is a subset of batch-based chemistries, molecules such as natural products will continue to evade drug prospectors. Also, it is uncertain whether flow synthesis can deliver improvements in the atom and energy economies of API production at the scales that would achieve the levels of revenue growth targeted by companies. Instead, it is argued that implementing metabolic engineering for the production of oxidized scaffolds as gateway molecules for flow-based addition of electrophiles is a more effective and scalable strategy for accessing natural product chemical space. This new paradigm for manufacturing, with metabolic engineering as its engine, would also permit rapid optimization of production variables and allow facile scale-up from gram to ton scale to meet material requirements for clinical trials, thus recasting manufacturing as a tool for discovery. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A reduced mechanism for predicting the ignition timing of a fuel blend of natural-gas and n-heptane in HCCI engine

International Nuclear Information System (INIS)

Bahlouli, Keyvan; Atikol, Ugur; Khoshbakhti Saray, R.; Mohammadi, Vahid

2014-01-01

Highlights: • A two-stage reduction process is used to produce two reduced mechanisms. • The mechanisms are combined to develop a reaction mechanism for a fuel blend. • The genetic algorithm is used for optimization of reaction constants. • The developed reduced mechanism can be used to predict the ignition timing in HCCI engine for a fuel blend. - Abstract: One of the main challenges associated with homogeneous charge compression ignition (HCCI) combustion engine application is the lack of direct control on ignition timing. One of the solutions to this problem is mixing two fuels with various properties at a variety of ratios on a cycle-by-cycle basis. In the current study, a reduced mechanism for a fuel blend of natural-gas and n-heptane is proposed. The approach is validated for the prediction of ignition timing in the HCCI combustion engine. A single-zone combustion model is used to simulate the HCCI engine. A two-stage reduction process is used to produce two reduced mechanisms of existing semi-detailed GRI-Mech. 3.0 mechanism that contains 53 species and 325 reactions and Golovichev’s mechanism consisting of 57 species and 290 reactions for natural gas and n-heptane fuels, respectively. Firstly, the unimportant species and related reactions are identified by employing the directed relation graph with error propagation (DRGEP) reduction method and then, to extend reduction, the principal component analysis (PCA) method is utilized. To evaluate the validity of the reduced mechanism, representative engine combustion parameters such as peak pressure, maximum heat release, and CA50 are used. The reduced mechanism of GRI-Mech. 3.0 mechanism, containing 19 species and 39 reactions, and the reduced mechanism of Golovichev’s mechanism, consisting of 40 species and 95 reactions, provide good prediction for the mentioned parameters in comparison with those of detailed mechanisms. The combination of the generated reduced mechanisms is used to develop a

SOCON: a computer model for analyzing the behavior of sodium-concrete reactions

International Nuclear Information System (INIS)

Nguyen, D.G.; Muhlestein, L.D.

1985-03-01

Guided by experimental evidence available to date, ranging from basic laboratory studies to large scale tests, a mechanistic computer model (the SOCON model) has been developed to analyze the behavior of SOdium-CONcrete reactions. The model accounts for the thermal, chemical and mechanical phenomena which interact to determine the consequences of the reactions. Reaction limiting mechanisms could be any process which reduces water release and sodium transport to fresh concrete; the buildup of the inert reaction product layer would increase the resistance to sodium transport; water dry-out would decrease the bubble agitation transport mechanism. However, stress-induced failure of concrete, such as spalling, crushing and cracking, and a massive release of gaseous products (hydrogen, water vapor and CO 2 ) would increase the transport of sodium to the reaction zone. The results of SOCON calculations are in excellent agreement with measurements obtained from large-scale sodium-limestone concrete reaction tests of duration up to 100 hours conducted at the Hanford Engineering Development Laboratory. 8 refs., 7 figs

Performance enhancement of a spark ignition engine fed by different fuel types

International Nuclear Information System (INIS)

Hedfi, Hachem; Jbara, Abdessalem; Jedli, Hedi; Slimi, Khalifa; Stoppato, Anna

2016-01-01

Highlights: • Biogas mixed with hydrogen is checked for a spark ignition engine. • An engine fed by biogas, hydrogen, natural gas or liquid petroleum gas is studied. • Efficiency is optimized with respect to consumption and exhaust gas recirculation. • Combustion reaction progress is characterized in real time. - Abstract: A numerical model based on thermodynamic and kinetic analyses has been established in order to evaluate biogas, hydrogen, natural gas or liquid petroleum gas as fuels in a spark ignition engine. For each fuel type, consumption as well as efficiency have been compared to gasoline in order to generate the same engine work (in the range of 0.28–0.43 W h/cycle). It was found that the spark ignition engine can be fed by an equimolar mixture of biogas and hydrogen. Moreover, thermal efficiency has been enhanced with respect to fuel consumption and exhaust gas recirculation (EGR). It was shown that an equimolar mixture between biogas and hydrogen increases the ITE by around 2.2% and decreases the mass consumption by less than 0.01 g/cycle. In addition, the combustion reaction progresses as well as CO and CO_2 emissions have been characterized in real time.

Insights into the mechanisms on chemical reactions: reaction paths for chemical reactions

International Nuclear Information System (INIS)

Dunning, T.H. Jr.; Rosen, E.; Eades, R.A.

1987-01-01

We report reaction paths for two prototypical chemical reactions: Li + HF, an electron transfer reaction, and OH + H 2 , an abstraction reaction. In the first reaction we consider the connection between the energetic terms in the reaction path Hamiltonian and the electronic changes which occur upon reaction. In the second reaction we consider the treatment of vibrational effects in chemical reactions in the reaction path formalism. 30 refs., 9 figs

Automatic analysis and reduction of reaction mechanisms for complex fuel combustion

Energy Technology Data Exchange (ETDEWEB)

Nilsson, Daniel

2001-05-01

This work concentrates on automatic procedures for simplifying chemical models for realistic fuels using skeletal mechanism construction and Quasi Steady-State Approximation (QSSA) applied to detailed reaction mechanisms. To automate the selection of species for removal or approximation, different indices for species ranking have thus been proposed. Reaction flow rates are combined with sensitivity information for targeting a certain quantity, and used to determine a level of redundancy for automatic skeletal mechanism construction by exclusion of redundant species. For QSSA reduction, a measure of species lifetime can be used for species ranking as-is, weighted by concentrations or molecular transport timescales, and/or combined with species sensitivity. Maximum values of the indices are accumulated over ranges of parameters, (e.g. fuel-air ratio and octane number), and species with low accumulated index values are selected for removal or steady-state approximation. In the case of QSSA, a model with a certain degree of reduction is automatically implemented as FORTRAN code by setting a certain index limit. The code calculates source terms of explicitly handled species from reaction rates and the steady-state concentrations by internal iteration. Homogeneous-reactor and one-dimensional laminar-flame models were used as test cases. A staged combustor fuelled by ethylene with monomethylamine addition is modelled by two homogeneous reactors in sequence, i.e. a PSR (Perfectly Stirred Reactor) followed by a PFR (Plug Flow Reactor). A modified PFR model was applied for simulation of a Homogeneous Charge Compression Ignition (HCCI) engine fuelled with four-component natural gas, whereas a two-zone model was required for a knocking Spark Ignition (SI) engine powered by Primary Reference Fuel (PRF). Finally, a laminar one-dimensional model was used to simulate premixed flames burning methane and an aeroturbine kerosene surrogate consisting of n-decane and toluene. In

Proton Beam Radiotherapy for Uveal Melanomas at Nice Teaching Hospital: 16 Years' Experience

International Nuclear Information System (INIS)

Caujolle, Jean-Pierre; Mammar, Hamid; Chamorey, Emmanuel Phar; Pinon, Fabien; Herault, Joel; Gastaud, Pierre

2010-01-01

Purpose: To present the results of uveal melanomas treated at Nice Teaching Hospital. Methods and Materials: This retrospective study included 886 consecutive patients referred to our clinic for the treatment of uveal melanomas by proton beam radiotherapy from June 1991 to December 2007. Survival rates were determined by using Kaplan-Meier estimates, and prognostic factors were evaluated using the log-rank test or Cox model. Results: The number (percent total) of subjects staged according to the TNM classification system (6th edition) of malignant tumors included 39 stage T1 (4.4%), 420 stage T2 (47.40%), 409 stage T3 (46.16%), and 18 stage T4 (2.03%) patients. The median follow-up was 63.7 months. The Kaplan-Meier overall survival rate at 5 years according to the sixth edition TNM classification was 92% for T1, 89% for T2, 67% for T3, and 62% for T4; and at 10 years, 86% for T1, 78% for T2, 43% for T3, and 41% for T4. Five factors were found to be associated with an increased death rate: advanced age, tumor thickness, largest tumor basal diameter, tumor volume, and tumor volume-to-eyeball volume ratio. The metastasis-free survival rates were 88.3 % at 5 years and 76.4 % at 10 years. The local control rates were 93.9% at 5 years and 92.1% at 10 years. The ocular conservation rates were 91.1% at 5 years and 87.3% at 10 years. Conclusions: We report the results of a large series of patients treated for uveal melanomas with a very long follow-up. Despite the large tumor volume treated, our results were similar to previously published findings relating to proton beam therapy.

Accurate atom-mapping computation for biochemical reactions.

Science.gov (United States)

Latendresse, Mario; Malerich, Jeremiah P; Travers, Mike; Karp, Peter D

2012-11-26

The complete atom mapping of a chemical reaction is a bijection of the reactant atoms to the product atoms that specifies the terminus of each reactant atom. Atom mapping of biochemical reactions is useful for many applications of systems biology, in particular for metabolic engineering where synthesizing new biochemical pathways has to take into account for the number of carbon atoms from a source compound that are conserved in the synthesis of a target compound. Rapid, accurate computation of the atom mapping(s) of a biochemical reaction remains elusive despite significant work on this topic. In particular, past researchers did not validate the accuracy of mapping algorithms. We introduce a new method for computing atom mappings called the minimum weighted edit-distance (MWED) metric. The metric is based on bond propensity to react and computes biochemically valid atom mappings for a large percentage of biochemical reactions. MWED models can be formulated efficiently as Mixed-Integer Linear Programs (MILPs). We have demonstrated this approach on 7501 reactions of the MetaCyc database for which 87% of the models could be solved in less than 10 s. For 2.1% of the reactions, we found multiple optimal atom mappings. We show that the error rate is 0.9% (22 reactions) by comparing these atom mappings to 2446 atom mappings of the manually curated Kyoto Encyclopedia of Genes and Genomes (KEGG) RPAIR database. To our knowledge, our computational atom-mapping approach is the most accurate and among the fastest published to date. The atom-mapping data will be available in the MetaCyc database later in 2012; the atom-mapping software will be available within the Pathway Tools software later in 2012.

The impact of an educational intervention, the New GP Contract and NICE guidelines on anti-epilepsy therapeutic drug monitoring.

Science.gov (United States)

Minshall, I; Berry, D; Smith, D

2011-03-01

Since the early 1970s therapeutic drug monitoring (TDM) of anti-epilepsy drug (AED) levels has been available to assist in the review process of patients with epilepsy. Routine blood levels were not part of the Quality and Outcomes Framework in the New GP Contract, neither have they been generally recommended in National Guidelines (NICE and SIGN) for the management of patients with epilepsy. To assess the impact of an educational intervention, the New GP Contract and NICE guidelines on the number of requests for TDM. Retrospective study. 39 general practices serving Chester (13), the Rural area surrounding Chester (13) and Ellesmere Port (13). An educational intervention took place in the individual Chester practices between December 2001 and March 2003. For the Rural and Ellesmere Port practices there was one combined event in March 2004 and in March 2007, respectively. Practices were encouraged, not to routinely request TDM, except in certain circumstances. The number of TDM requests for Chester, Rural and Ellesmere Port were obtained from the local laboratory in Chester, plus other nearby hospitals, to provide control groups. The number of TDM requests from primary care for Chester, Rural, Ellesmere Port, Wirral, Crewe, Warrington and Wrexham, April to April, 2002 through to 2008, where available. There has been a fall in the number requests in all districts. The most significant falls were in Chester (47%), Rural (34%) and Ellesmere Port (47%), and corresponded to the time of their educational intervention. The fall has been less marked in Wirral (25%), Crewe (27%), Wrexham (10%) and Warrington (9%). In 2004, the first year after the introduction of the New GP Contract, TDM in Chester and the Rural fell significantly, while those in Ellesmere Port, Wirral, Crewe and Wrexham increased. TDM dropped significantly in Ellesmere Port in the year after their educational intervention. Despite the valproate assay being clinically unhelpful there were still 611 requests

Implanting a Discipline: The Academic Trajectory of Nuclear Engineering in the USA and UK

Science.gov (United States)

Johnston, Sean F.

2009-01-01

The nuclear engineer emerged as a new form of recognised technical professional between 1940 and the early 1960s as nuclear fission, the chain reaction and their applications were explored. The institutionalization of nuclear engineering--channelled into new national laboratories and corporate design offices during the decade after the war, and…

Engineering Metallic Nanoparticles for Enhancing and Probing Catalytic Reactions.

Science.gov (United States)

Collins, Gillian; Holmes, Justin D

2016-07-01

Recent developments in tailoring the structural and chemical properties of colloidal metal nanoparticles (NPs) have led to significant enhancements in catalyst performance. Controllable colloidal synthesis has also allowed tailor-made NPs to serve as mechanistic probes for catalytic processes. The innovative use of colloidal NPs to gain fundamental insights into catalytic function will be highlighted across a variety of catalytic and electrocatalytic applications. The engineering of future heterogenous catalysts is also moving beyond size, shape and composition considerations. Advancements in understanding structure-property relationships have enabled incorporation of complex features such as tuning surface strain to influence the behavior of catalytic NPs. Exploiting plasmonic properties and altering colloidal surface chemistry through functionalization are also emerging as important areas for rational design of catalytic NPs. This news article will highlight the key developments and challenges to the future design of catalytic NPs. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A Short Course in Problems in Applied Science and Engineering.

Science.gov (United States)

Nicholson, H. W.

1987-01-01

Provides a description of a concentrated four-week term course that provided students with opportunities of association with applied science and engineering professionals. Reviews the program's organizational structure, project requirements, and summarizes students reactions to the course. (ML)

Premixed Turbulent Combustion in High Reynolds Number Regimes of Thickened Flamelets and Distributed Reactions

Science.gov (United States)

2016-03-24

multiple Damkohler or Karlovitz numbers to account for auto - ignition and other types of chemistry, (d)… For example, residence time is important since...First, the rapid compression of reactants within a shock tube or an HCCI engine is known to rapidly elevate the temperature of the reactants above...the ignition temperature, causing reactions to become distributed in space [4]. Alden et al. reported broad CH zones within an HCCI engine experiment

Reactions between Ti3Al-Nb and mixed second phases

International Nuclear Information System (INIS)

Bowden, D.M.; Sastry, S.M.L.; Smith, P.R.

1989-01-01

In engineered multiphase materials, the interfacial characteristics that develop between individual phases during high-temperature exposure can play a significant role in determining mechanical behavior. In titanium alloys containing silicon carbide and boron fibers, rule-of-mixtures strength values are not realized, primarily because of the chemical reactions that occur between the matrix alloys and these phases. Previous investigations of the reaction between titanium alloys and boron have shown that a uniform reaction layer of the phase TiB 2 is formed, followed by growth of TiB needles. The primary mechanism of this reaction was observed to be the one-way diffusion of boron into titanium. The use of a B 4 C coating on the boron (B 4 C/B) as a diffusion barrier was found to significantly slow the reaction between the titanium and boron. Certain alloy additions to titanium, such as aluminum, vanadium, and molybdenum, can increase the chemical compatibility of these two phases. For the case of SiC, the reaction zone is formed by the interdiffusion of silicon and carbon atoms with titanium. X-ray diffraction studies have shown the reaction components to include TiC, Ti 5 Si 3 , and TiSi 2 . In the present study, the reactions between a Ti 3 Al alloy and both B 4 C/B and SiC have been examined. Reaction models are proposed to describe the development of the chemical interaction zone formed between these phases

Development of a skeletal multi-component fuel reaction mechanism based on decoupling methodology

International Nuclear Information System (INIS)

Mohan, Balaji; Tay, Kun Lin; Yang, Wenming; Chua, Kian Jon

2015-01-01

Highlights: • A compact multi-component skeletal reaction mechanism was developed. • Combined bio-diesel and PRF mechanism was proposed. • The mechanism consists of 68 species and 183 reactions. • Well validated against ignition delay times, flame speed and engine results. - Abstract: A new coupled bio-diesel surrogate and primary reference fuel (PRF) oxidation skeletal mechanism has been developed. The bio-diesel surrogate sub-mechanism consists of oxidation sub-mechanisms of Methyl decanoate (MD), Methyl 9-decenoate (MD9D) and n-Heptane fuel components. The MD and MD9D are chosen to represent the saturated and unsaturated methyl esters respectively in bio-diesel fuels. Then, a reduced iso-Octane oxidation sub-mechanism is added to the bio-diesel surrogate sub-mechanism. Then, all the sub-mechanisms are integrated to a reduced C_2–C_3 mechanism, detailed H_2/CO/C_1 mechanism and reduced NO_x mechanism based on decoupling methodology. The final mechanism consisted of 68 species and 183 reactions. The mechanism was well validated with shock-tube ignition delay times, laminar flame speed and 3D engine simulations.

Combat Engineers of World War II: Lessons on training and Mobilization

Science.gov (United States)

2014-06-13

reaction to World War I, antiwar sentiment, and the Great Depression led to a large decline in the United States military.1 This decline was experienced...posts. 30Ibid., 68. 311st Engineer Amphibian Brigade to the Commanding General, Allied Forces, 30 December 1942, Lessons from Operation Torch...hostilities in Europe and Japan (celebrated as Victory in Japan Day, 2 September 1945) brought about a rapid declination of trainees within the engineer

Study of a new mechanism of reaction between heavy ions: the quasi-fission

International Nuclear Information System (INIS)

Ngo, Christian.

1975-01-01

A new type of deep inelastic reaction between two heavy ions (quasi-fission) has been discovered and studied when the product Z 1 Z 2 between the two ion atomic numbers is greater than or approximately equal to 1500. This mechanism is mainly binary, the total kinetic energy of the products is the one expected for a binary fission giving the same products, most of the products have masses very close to the initial masses, the angular distribution of the light products is peaked slightly forwards the projectile grazing angle (when the bombarding energy is not too much above the interaction barrier), at last, the total cross section for this process is a large part of the total reaction cross section. These results have been interpreted on the one hand using a static model and on the other hand using a dynamic model. An interaction potential between the two heavy ions has been derived using the energy density formalism within the framework of the sudden approximation. It has been shown that the nuclear part satisfies a scaling law which allows to factorize it in one term which depends on the two ion masses and another term which is independent of the system (universal function). Using the critical distance notion, the static calculations reproduce the quasi-fission cross sections. With regards to the dynamical calculations, the previously described potential has been introduced within the framework of Deubler and Dietrich's model. It is a classical dynamical calculation including dissipative terms. The vibration degrees of freedom of each ion have been explicitely taken into account. This calculation nicely reproduces both the energy loss in the relative motion, the focusing effect of the angular distribution, and the quasi-fission cross sections [fr

Establishment of Combustion Model for Isooctane HCCI Marine Diesel Engine and Research on the Combustion Characteristic

Directory of Open Access Journals (Sweden)

Li Biao

2016-01-01

Full Text Available The homogeneous charge compression ignition (HCCI combustion mode applied in marine diesel engine is expected to be one of alternative technologies to decrease nitrogen oxide (NOX emission and improve energy utilization rate. Applying the chemical-looping combustion (CLC mechanism inside the cylinder, a numerical study on the HCCI combustion process is performed taking a marine diesel engine as application object. The characteristic feature of combustion process is displayed. On this basis, the formation and emission of NOX are analyzed and discussed. The results indicate that the HCCI combustion mode always exhibit two combustion releasing heats: low-temperature reaction and high-temperature reaction. The combustion phase is divided into low-temperature reaction zone, high-temperature reaction zone and negative temperature coefficient (NTC zone. The operating conditions of the high compression ratio, high intake air temperature, low inlet pressure and small excess air coefficient would cause the high in-cylinder pressure which often leads engine detonation. The low compression ratio, low intake air temperature and big excess air coefficient would cause the low combustor temperature which is conducive to reduce NOX emissions. These technological means and operating conditions are expected to meet the NOX emissions limits in MARPOL73/78 Convention-Annex VI Amendment.

Investigation of Evaluation method of chemical runaway reaction

International Nuclear Information System (INIS)

Sato, Yoshihiko; Sasaya, Shinji; Kurakata, Koichiro; Nojiri, Ichiro

2002-02-01

Safety study 'Study of evaluation of abnormal occurrence for chemical substances in the nuclear fuel facilities' will be carried out from 2001 to 2005. In this study, the prediction of thermal hazards of chemical substances will be investigated and prepared. The hazard prediction method of chemical substances will be constructed from these results. Therefore, the hazard prediction methods applied in the chemical engineering in which the chemical substances with the hazard of fire and explosion were often treated were investigated. CHETAH (The ASTM Computer Program for Chemical Thermodynamic and Energy Release Evaluation) developed by ASTM (American Society for Testing and Materials) and TSS (Thermal Safety Software) developed by CISP (ChemInform St. Petersburg) were introduced and the fire and explosion hazards of chemical substances and reactions in the reprocessing process were evaluated. From these evaluated results, CHETAH could almost estimate the heat of reaction at 10% accuracy. It was supposed that CHETAH was useful as a screening for the hazards of fire and explosion of the new chemical substances and so on. TSS could calculate the reaction rate and the reaction behavior from the data measured by the various calorimeters rapidly. It was supposed that TSS was useful as an evaluation method for the hazards of fire and explosion of the new chemical reactions and so on. (author)

A Chemical Engineering Perspective on the Origins of Life

Directory of Open Access Journals (Sweden)

Martha A. Grover

2015-05-01

Full Text Available Atoms and molecules assemble into materials, with the material structure determining the properties and ultimate function. Human-made materials and systems have achieved great complexity, such as the integrated circuit and the modern airplane. However, they still do not rival the adaptivity and robustness of biological systems. Understanding the reaction and assembly of molecules on the early Earth is a scientific grand challenge, and also can elucidate the design principles underlying biological materials and systems. This research requires understanding of chemical reactions, thermodynamics, fluid mechanics, heat and mass transfer, optimization, and control. Thus, the discipline of chemical engineering can play a central role in advancing the field. In this paper, an overview of research in the origins field is given, with particular emphasis on the origin of biopolymers and the role of chemical engineering phenomena. A case study is presented to highlight the importance of the environment and its coupling to the chemistry.

Certolizumab Pegol for Treating Rheumatoid Arthritis Following Inadequate Response to a TNF-α Inhibitor: An Evidence Review Group Perspective of a NICE Single Technology Appraisal.

Science.gov (United States)

Bermejo, Iñigo; Stevenson, Matt; Archer, Rachel; Stevens, John W; Goka, Edward; Clowes, Mark; Scott, David L; Young, Adam

2017-11-01

As part of its single technology appraisal (STA) process, the National Institute for Health and Care Excellence (NICE) invited the manufacturer (UCB Pharma) of certolizumab pegol (CZP; Cimzia ® ) to submit evidence of its clinical and cost effectiveness for the treatment of rheumatoid arthritis (RA) following inadequate response to a tumour necrosis factor-α inhibitor (TNFi). The School of Health and Related Research Technology Appraisal Group at the University of Sheffield was commissioned to act as the independent Evidence Review Group (ERG). The ERG produced a detailed review of the evidence for the clinical and cost effectiveness of the technology, based upon the company's submission to NICE. The clinical effectiveness evidence in the company's submission for CZP was based predominantly on six randomised controlled trials (RCTs) comparing the efficacy of CZP against placebo. The clinical effectiveness review identified no head-to-head evidence on the efficacy of CZP against the comparators within the scope; therefore, the company performed a network meta-analysis (NMA). The company's NMA concluded that CZP had a similar efficacy to that of its comparators. The company submitted a Markov model that assessed the incremental cost effectiveness of CZP versus comparator biologic disease-modifying antirheumatic drugs (bDMARDs) for the treatment of RA from the perspective of the National Health Service for three decision problems, each of which followed an inadequate response to a TNFi. These were (1) a comparison against rituximab (RTX) in combination with methotrexate (MTX); (2) a comparison against bDMARDs when RTX was contraindicated or withdrawn due to an adverse event; and (3) a comparison against bDMARDs when MTX was contraindicated or withdrawn due to an adverse event. Results from the company's economic evaluation showed that CZP resulted in a similar number of quality-adjusted life years (QALYs) produced at similar or lower costs compared with comparator b

Studying Chemical Reactions, One Bond at a Time, with Single Molecule AFM Techniques

Science.gov (United States)

Fernandez, Julio M.

2008-03-01

The mechanisms by which mechanical forces regulate the kinetics of a chemical reaction are unknown. In my lecture I will demonstrate how we use single molecule force-clamp spectroscopy and protein engineering to study the effect of force on the kinetics of thiol/disulfide exchange. Reduction of disulfide bond via the thiol/disulfide exchange chemical reaction is crucial in regulating protein function and is of common occurrence in mechanically stressed proteins. While reduction is thought to proceed through a substitution nucleophilic bimolecular (SN2) reaction, the role of a mechanical force in modulating this chemical reaction is unknown. We apply a constant stretching force to single engineered disulfide bonds and measure their rate of reduction by dithiothreitol (DTT). We find that while the reduction rate is linearly dependent on the concentration of DTT, it is exponentially dependent on the applied force, increasing 10-fold over a 300 pN range. This result predicts that the disulfide bond lengthens by 0.34 å at the transition state of the thiol/disulfide exchange reaction. In addition to DTT, we also study the reduction of the engineered disulfide bond by the E. coli enzyme thioredoxin (Trx). Thioredoxins are enzymes that catalyze disulfide bond reduction in all organisms. As before, we apply a mechanical force in the range of 25-450 pN to the engineered disulfide bond substrate and monitor the reduction of these bonds by individual enzymes. In sharp contrast with the data obtained with DTT, we now observe two alternative forms of the catalytic reaction, the first requiring a reorientation of the substrate disulfide bond, causing a shortening of the substrate polypeptide by 0.76±0.07 å, and the second elongating the substrate disulfide bond by 0.21±0.01 å. These results support the view that the Trx active site regulates the geometry of the participating sulfur atoms, with sub-ångström precision, in order to achieve efficient catalysis. Single molecule

Reaction Control System Thruster Cracking Consultation: NASA Engineering and Safety Center (NESC) Materials Super Problem Resolution Team (SPRT) Findings

Science.gov (United States)

MacKay, Rebecca A.; Smith, Stephen W.; Shah, Sandeep R.; Piascik, Robert S.

2005-01-01

The shuttle orbiter s reaction control system (RCS) primary thruster serial number 120 was found to contain cracks in the counter bores and relief radius after a chamber repair and rejuvenation was performed in April 2004. Relief radius cracking had been observed in the 1970s and 1980s in seven thrusters prior to flight; however, counter bore cracking had never been seen previously in RCS thrusters. Members of the Materials Super Problem Resolution Team (SPRT) of the NASA Engineering and Safety Center (NESC) conducted a detailed review of the relevant literature and of the documentation from the previous RCS thruster failure analyses. It was concluded that the previous failure analyses lacked sufficient documentation to support the conclusions that stress corrosion cracking or hot-salt cracking was the root cause of the thruster cracking and lacked reliable inspection controls to prevent cracked thrusters from entering the fleet. The NESC team identified and performed new materials characterization and mechanical tests. It was determined that the thruster intergranular cracking was due to hydrogen embrittlement and that the cracking was produced during manufacturing as a result of processing the thrusters with fluoride-containing acids. Testing and characterization demonstrated that appreciable environmental crack propagation does not occur after manufacturing.

Study of austempering reaction in austempered ductile iron

International Nuclear Information System (INIS)

Ja'far Farhan Al-Sharab; Sharma, D.G.R.; Samsul Bahar Sadli

1996-01-01

Austempered Ductile Iron (ADI) is an important engineering material which is gaining popularity. The conventional belief that austempered ductile iron, when heat treated satisfactorily, contains bainite, is now disproved by recent experiments. Our present work on the study of the reaction products of heat treated ADI by x-ray diffraction confirms the recent view. The results of x-ray diffraction studies on the structural constituents od ADI for various durations of austempering are presented and discussed

Reaction-diffusion controlled growth of complex structures

Science.gov (United States)

Noorduin, Willem; Mahadevan, L.; Aizenberg, Joanna

2013-03-01

Understanding how the emergence of complex forms and shapes in biominerals came about is both of fundamental and practical interest. Although biomineralization processes and organization strategies to give higher order architectures have been studied extensively, synthetic approaches to mimic these self-assembled structures are highly complex and have been difficult to emulate, let alone replicate. The emergence of solution patterns has been found in reaction-diffusion systems such as Turing patterns and the BZ reaction. Intrigued by this spontaneous formation of complexity we explored if similar processes can lead to patterns in the solid state. We here identify a reaction-diffusion system in which the shape of the solidified products is a direct readout of the environmental conditions. Based on insights in the underlying mechanism, we developed a toolbox of engineering strategies to deterministically sculpt patterns and shapes, and combine different morphologies to create a landscape of hierarchical multi scale-complex tectonic architectures with unprecedented levels of complexity. These findings may hold profound implications for understanding, mimicking and ultimately expanding upon nature's morphogenesis strategies, allowing the synthesis of advanced highly complex microscale materials and devices. WLN acknowledges the Netherlands Organization for Scientific Research for financial support

Nuclear engineering in the linelight

International Nuclear Information System (INIS)

Blumentritt, G.; Schwaar, L.

1979-01-01

An insight is given into the state of art of nuclear engineering considering only essential problems. The subject is covered under the following headings: (1) the way to nuclear fission, (2) detectors for nuclear radiation, (3) measuring systems for nuclear radiation, (4) radioisotopes in industry, (5) aids in medicine, (6) radiation absorption and its utilization, (7) use of radioisotopes in research, (8) the chain reaction in a nuclear reactor, (9) power from nuclear power plants, (10) pressurized water reactors (PWR), (11) high-temperature reactors (HTGR), (12) fast breeder reactors (FBR), (13) nuclear energetics - a new branch of industry, (14) nuclear explosions, (15) nuclear research at Rossendorf, and (16) the energy of the future. An appendix includes definitions of terms used in nuclear engineering. The book is written for a wide circle of readers who are interested in the peaceful uses of nuclear energy

Bypassing adverse injection reactions to nanoparticles through shape modification and attachment to erythrocytes

DEFF Research Database (Denmark)

Wibroe, Peter Popp; Anselmo, Aaron C; Nilsson, Per H

2017-01-01

Intravenously injected nanopharmaceuticals, including PEGylated nanoparticles, induce adverse cardiopulmonary reactions in sensitive human subjects, and these reactions are highly reproducible in pigs. Although the underlying mechanisms are poorly understood, roles for both the complement system...... by macrophages within the first few minutes of injection overcomes adverse reactions in pigs using two independent approaches. First, we changed the particle geometry from a spherical shape (which triggers cardiopulmonary distress) to either rod- or disk-shape morphology. Second, we physically adhered spheres...... to the surface of erythrocytes. These strategies, which are distinct from commonly leveraged stealth engineering approaches such as nanoparticle surface functionalization with poly(ethylene glycol) and/or immunological modulators, prevent robust macrophage recognition, resulting in the reduction or mitigation...

Third O2 addition reactions promote the low-temperature auto-ignition of n-alkanes

KAUST Repository

Wang, Zhandong

2016-01-20

Comprehensive low-temperature oxidation mechanisms are needed to accurately predict fuel auto-ignition properties. This paper studies the effects of a previously unconsidered third O2 addition reaction scheme on the simulated auto-ignition of n-alkanes. We demonstrate that this extended low-temperature oxidation scheme has a minor effect on the simulation of n-pentane ignition; however, its addition significantly improves the prediction of n-hexane auto-ignition under low-temperature rapid compression machine conditions. Additional simulations of n-hexane in a homogeneous charge compression ignition engine show that engine-operating parameters (e.g., intake temperature and combustion phasing) are significantly altered when the third O2 addition kinetic mechanism is considered. The advanced combustion phasing is initiated by the formation and destruction of additional radical chain-branching intermediates produced in the third O2 addition process, e.g. keto-dihydroperoxides and/or keto-hydroperoxy cyclic ethers. Our results indicate that third O2 addition reactions accelerate low-temperature radical chain branching at conditions of relevance to advance engine technologies, and therefore these chemical pathways should also be considered for n-alkanes with 6 or more carbon atoms. © 2015 The Combustion Institute.

Software packages for food engineering needs

OpenAIRE

Abakarov, Alik

2011-01-01

The graphic user interface (GUI) software packages “ANNEKs” and “OPT-PROx” are developed to meet food engineering needs. “OPT-RROx” (OPTimal PROfile) is software developed to carry out thermal food processing optimization based on the variable retort temperature processing and global optimization technique. “ANNEKs” (Artificial Neural Network Enzyme Kinetics) is software designed for determining the kinetics of enzyme hydrolysis of protein at different initial reaction parameters based on the...

Urea-SCR Temperature Investigation for NOx Control of Diesel Engine

Directory of Open Access Journals (Sweden)

Asif Muhammad

2015-01-01

Full Text Available SCR (selective catalytic reduction system is continuously being analyzed by many researchers worldwide on various concerns due to the stringent nitrogen oxides (NOx emissions legislation for heavy-duty diesel engines. Urea-SCR includes AdBlue as urea source, which subsequently decomposes to NH3 (ammonia being the reducing agent. Reaction temperature is a key factor for the performance of urea-SCR system, as urea decomposition rate is sensitive to a specific temperature range. This particular study was directed to investigate the temperature of the SCR system in diesel engine with the objective to confirm that whether the appropriate temperature is attained for occurrence of urea based catalytic reduction or otherwise and how the system performs on the prescribed temperature range. Diesel engine fitted with urea-SCR exhaust system has been operated on European standard cycle for emission testing to monitor the temperature and corresponding nitrogen oxides (NOx values on specified points. Moreover, mathematical expressions for approximation of reaction temperature are also proposed which are derived by applying energy conservation principal and gas laws. Results of the investigation have shown that during the whole testing cycle system temperature has remained in the range where urea-SCR can take place with best optimum rate and the system performance on account of NOx reduction was exemplary as excellent NOx conversion rate is achieved. It has also been confirmed that selective catalytic reduction (SCR is the best suitable technology for automotive engine-out NOx control.

COMBUSTION STAGE NUMERICAL ANALYSIS OF A MARINE ENGINE

Directory of Open Access Journals (Sweden)

DOREL DUMITRU VELCEA

2016-06-01

Full Text Available The primary goal of engine design is to maximize each efficiency factor, in order to extract the most power from the least amount of fuel. In terms of fluid dynamics, the volumetric and combustion efficiency are dependent on the fluid dynamics in the engine manifolds and cylinders. Cold flow analysis involves modeling the airflow in the transient engine cycle without reactions. The goal is to capture the mixture formation process by accurately accounting for the interaction of moving geometry with the fluid dynamics of the induction process. The changing characteristics of the air flow jet that tumbles into the cylinder with swirl via intake valves and the exhaust jet through the exhaust valves as they open and close can be determined, along with the turbulence production from swirl and tumble due to compression and squish. The target of this paper was to show how, by using the reverse engineering techniques, one may replicate and simulate the functioning conditions and parameters of an existing marine engine. The departing information were rather scarce in terms of real processes taking place in the combustion stage, but at the end we managed to have a full picture of the main parameters evolution during the combustion phase inside this existing marine engine

Pegylated Liposomal Irinotecan Hydrochloride Trihydrate for Treating Pancreatic Cancer After Gemcitabine: An Evidence Review Group Perspective of a NICE Single Technology Appraisal.

Science.gov (United States)

Fleeman, Nigel; Abdulla, Ahmed; Bagust, Adrian; Beale, Sophie; Richardson, Marty; Stainthorpe, Angela; Boland, Angela; Kotas, Eleanor; McEntee, Joanne; Palmer, Daniel

2018-03-01

The National Institute for Health and Care Excellence (NICE) invited the manufacturer (Shire Pharmaceuticals) of pegylated liposomal irinotecan hydrochloride trihydrate (liposomal irinotecan) to submit clinical and cost-effectiveness evidence for its use in combination with 5-fluorouracil (5-FU) and folic acid/leucovorin (LV) for treating patients with pancreatic cancer following prior treatment with gemcitabine as part of the institute's Single Technology Appraisal process. The Liverpool Reviews and Implementation Group at the University of Liverpool was commissioned to act as the Evidence Review Group (ERG). This article presents a summary of the company's evidence, the ERG review and the resulting NICE guidance (TA440), issued on 26 April 2017. Clinical evidence for liposomal irinotecan + 5-FU/LV versus 5-FU/LV was derived from 236 patients with metastatic pancreatic cancer in the multinational, open-label, randomised controlled NAPOLI-1 trial. Results from analyses of progression-free survival and overall survival showed statistically significant improvements for patients treated with liposomal irinotecan + 5-FU/LV compared with those treated with 5-FU/LV. However, 5-FU/LV alone is rarely used in National Health Service clinical practice for patients with metastatic pancreatic cancer previously treated with gemcitabine. The company, ERG and Appraisal Committee (AC) all agreed that oxaliplatin + 5-FU/LV is the most commonly used treatment. Oxaliplatin + 5-FU/LV was compared with 5-FU/LV in two trials identified by the company. However, the company and the ERG both considered attempts to compare the efficacy of liposomal irinotecan + 5-FU/LV with oxaliplatin + 5-FU/LV to be methodologically flawed; not only was there heterogeneity between trials and their populations but also the proportional hazards assumption required to conduct a robust indirect treatment comparison (ITC) was violated. Nonetheless, data derived from an ITC were used to inform the

Halogenase engineering and its utility in medicinal chemistry.

Science.gov (United States)

Fraley, Amy E; Sherman, David H

2018-06-15

Halogenation is commonly used in medicinal chemistry to improve the potency of pharmaceutical leads. While synthetic methods for halogenation present selectivity and reactivity challenges, halogenases have evolved over time to perform selective reactions under benign conditions. The optimization of halogenation biocatalysts has utilized enzyme evolution and structure-based engineering alongside biotransformation in a variety of systems to generate stable site-selective variants. The recent improvements in halogenase-catalyzed reactions has demonstrated the utility of these biocatalysts for industrial purposes, and their ability to achieve a broad substrate scope implies a synthetic tractability with increasing relevance in medicinal chemistry. Copyright © 2018 Elsevier Ltd. All rights reserved.

Promoting peace in engineering education: modifying the ABET criteria.

Science.gov (United States)

Catalano, George D

2006-04-01

Modifications to the ABET Criterion 3 are suggested in support of the effort to promote the pursuit of peace in engineering education. The proposed modifications are the result of integrating the United Nations' sponsored "Integral Model of Education for Peace, Democracy and Sustainable Development" into the modern engineering curriculum. The key elements of the model are being at peace with oneself, being at peace with others, and being at peace with the planet. In addition to proposing modifications, specific classroom activities are described and implemented, and students' reactions and the effectiveness of the various exercises are discussed.

Rivaroxaban for Preventing Atherothrombotic Events in People with Acute Coronary Syndrome and Elevated Cardiac Biomarkers: An Evidence Review Group Perspective of a NICE Single Technology Appraisal.

Science.gov (United States)

Pandor, Abdullah; Pollard, Daniel; Chico, Tim; Henderson, Robert; Stevenson, Matt

2016-05-01

As part of its Single Technology Appraisal process, the National Institute for Health and Care Excellence (NICE) invited the company that manufactures rivaroxaban (Xarelto, Bayer) to submit evidence of the clinical and cost effectiveness of rivaroxaban for the prevention of adverse outcomes in patients after the acute management of acute coronary syndrome (ACS). The School of Health and Related Research Technology Appraisal Group at the University of Sheffield was commissioned to act as the independent Evidence Review Group (ERG). The ERG produced a critical review of the evidence for the clinical and cost effectiveness of the technology, based upon the company's submission to NICE. The evidence was derived mainly from a randomised, double-blind, phase III, placebo-controlled trial of rivaroxaban (either 2.5 or 5 mg twice daily) in patients with recent ACS [unstable angina, non-ST segment elevation myocardial infarction (NSTEMI) or ST segment elevation myocardial infarction (STEMI)]. In addition, all patients received antiplatelet therapy [aspirin alone or aspirin and a thienopyridine either as clopidogrel (approximately 99 %) or ticlopidine (approximately 1 %) according to national or local guidelines]. The higher dose of rivaroxaban (5 mg twice daily) did not form part of the marketing authorisation. A post hoc subgroup analysis of the licensed patients who had ACS with elevated cardiac biomarkers (that is, patients with STEMI and NSTEMI) without prior stroke or transient ischaemic stroke showed that compared with standard care, the addition of rivaroxaban (2.5 mg twice daily) to existing antiplatelet therapy reduced the composite endpoint of cardiovascular mortality, myocardial infarction or stroke, but increased the risk of major bleeding and intracranial haemorrhage. However, there were a number of limitations in the evidence base that warrant caution in its interpretation. In particular, the evidence may be confounded because of the post hoc subgroup

A Study on Catalysis and Electrolyte Engineering for H2/O2 Electrochemical Reactions

KAUST Repository

Shinagawa, Tatsuya

2016-01-01

placed on milder conditions, to rationalize and improve its performance. Microkinetic analysis was performed for the cathodic half-reaction in conjugation with mass transport evaluation using various electrode materials. The analysis revealed a

Cartoons, movies

DEFF Research Database (Denmark)

Sheikh, Mona Kanwal; Gad, Ulrik Pram

Dutch MP Geert Wilders has declared that he will soon release a 15 minutes movie called "Fitna" to make his criticism of the Quran more trenchant. "Fitna" is likely to meet harsh reactions. Both because the modus operandi of Wilders falls nicely into what have become a specific genre of political...

Nanomaterials for Engineering Stem Cell Responses.

Science.gov (United States)

Kerativitayanan, Punyavee; Carrow, James K; Gaharwar, Akhilesh K

2015-08-05

Recent progress in nanotechnology has stimulated the development of multifunctional biomaterials for tissue engineering applications. Synergistic interactions between nanomaterials and stem cell engineering offer numerous possibilities to address some of the daunting challenges in regenerative medicine, such as controlling trigger differentiation, immune reactions, limited supply of stem cells, and engineering complex tissue structures. Specifically, the interactions between stem cells and their microenvironment play key roles in controlling stem cell fate, which underlines therapeutic success. However, the interactions between nanomaterials and stem cells are not well understood, and the effects of the nanomaterials shape, surface morphology, and chemical functionality on cellular processes need critical evaluation. In this Review, focus is put on recent development in nanomaterial-stem cell interactions, with specific emphasis on their application in regenerative medicine. Further, the emerging technologies based on nanomaterials developed over the past decade for stem cell engineering are reviewed, as well as the potential applications of these nanomaterials in tissue regeneration, stem cell isolation, and drug/gene delivery. It is anticipated that the enhanced understanding of nanomaterial-stem cell interactions will facilitate improved biomaterial design for a range of biomedical and biotechnological applications. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Cabazitaxel for Hormone-Relapsed Metastatic Prostate Cancer Previously Treated With a Docetaxel-Containing Regimen: An Evidence Review Group Perspective of a NICE Single Technology Appraisal.

Science.gov (United States)

Kearns, Benjamin; Pandor, Abdullah; Stevenson, Matt; Hamilton, Jean; Chambers, Duncan; Clowes, Mark; Graham, John; Kumar, M Satish

2017-04-01

As part of its single technology appraisal (STA) process, the National Institute for Health and Care Excellence (NICE) invited the company that manufactures cabazitaxel (Jevtana ® , Sanofi, UK) to submit evidence for the clinical and cost effectiveness of cabazitaxel for treatment of patients with metastatic hormone-relapsed prostate cancer (mHRPC) previously treated with a docetaxel-containing regimen. The School of Health and Related Research Technology Appraisal Group at the University of Sheffield was commissioned to act as the independent Evidence Review Group (ERG). The ERG produced a critical review of the evidence for the clinical and cost effectiveness of the technology based upon the company's submission to NICE. Clinical evidence for cabazitaxel was derived from a multinational randomised open-label phase III trial (TROPIC) of cabazitaxel plus prednisone or prednisolone compared with mitoxantrone plus prednisone or prednisolone, which was assumed to represent best supportive care. The NICE final scope identified a further three comparators: abiraterone in combination with prednisone or prednisolone; enzalutamide; and radium-223 dichloride for the subgroup of people with bone metastasis only (no visceral metastasis). The company did not consider radium-223 dichloride to be a relevant comparator. Neither abiraterone nor enzalutamide has been directly compared in a trial with cabazitaxel. Instead, clinical evidence was synthesised within a network meta-analysis (NMA). Results from TROPIC showed that cabazitaxel was associated with a statistically significant improvement in both overall survival and progression-free survival compared with mitoxantrone. Results from a random-effects NMA, as conducted by the company and updated by the ERG, indicated that there was no statistically significant difference between the three active treatments for both overall survival and progression-free survival. Utility data were not collected as part of the TROPIC trial, and

Development of the Automatic Modeling System for Reaction Mechanisms Using REX+JGG

Science.gov (United States)

Takahashi, Takahiro; Kawai, Kohei; Nakai, Hiroyuki; Ema, Yoshinori

The identification of appropriate reaction models is very helpful for developing chemical vapor deposition (CVD) processes. In this study, we developed an automatic modeling system that analyzes experimental data on the cross- sectional shapes of films deposited on substrates with nanometer- or micrometer-sized trenches. The system then identifies a suitable reaction model to describe the film deposition. The inference engine used by the system to model the reaction mechanism was designed using real-coded genetic algorithms (RCGAs): a generation alternation model named "just generation gap" (JGG) and a real-coded crossover named "real-coded ensemble crossover" (REX). We studied the effect of REX+JGG on the system's performance, and found that the system with REX+JGG was the most accurate and reliable at model identification among the algorithms that we studied.

Mobile APP for Motivation to Learning: An Engineering Case

Science.gov (United States)

Jou, Min; Lin, Yen-Ting; Tsai, Hsieh-Chih

2016-01-01

Synthesis of Materials is regarded as an important core subject in engineering education. However, many concepts and knowledge in the material synthesis can be rather abstract and difficult to understand by the student learners. Experiments are limited in scope due to lack of equipment, control of toxic materials, and risks of chemical reactions,…

A thematic analysis of the strengths and weaknesses of manufacturers' submissions to the NICE Single Technology Assessment (STA) process.

Science.gov (United States)

Carroll, Christopher; Kaltenthaler, Eva; FitzGerald, Patrick; Boland, Angela; Dickson, Rumona

2011-10-01

The NICE Single Technology Appraisal (STA) process in the UK has been underway for five years. Evidence Review Groups (ERGs) critically appraise submissions from manufacturers on the clinical and cost effectiveness of new technologies. This study analysed the ERGs' assessment of the strengths and weaknesses of 30 manufacturers' submissions to the STA process. Thematic analysis was performed on the textual descriptions of the strengths and weakness of manufacturer submissions, as outlined by the ERGs in their reports. Various themes emerged from the data. These themes related to the processes applied in the submissions; the content of the submission (e.g. the amount and quality of evidence); the reporting of the submissions' review and analysis processes; the reliability and validity of the submissions' findings; and how far the submission had satisfied the STA process objectives. STA submissions could be improved if attention were paid to transparency in the reporting, conduct and justification of review and modelling processes and analyses, as well as greater robustness in the choice of data and closer adherence to the scope or decision problem. Where this adherence is not possible, more detailed justification of the choice of evidence or data is required. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Sodium-water reaction test facility (SWAT-3)

International Nuclear Information System (INIS)

Shimazu, Hisashi; Ukechi, Kazutoshi; Sasakura, Kazutake; Kusunoki, Junichi

1976-01-01

In the development of the liquid metal cooled fast breeder reactor (LMFBR), the steam generator (SG) is considered one of the most important components. The Power Reactor and Nuclear Fuel Development Corporation (PNC) is now promoting the research and development of the SG system used with the prototype fast breeder reactor ''Monju''. In this research, the phenomena of the sodium-water reaction in the SG are the key which must be investigated for the solution of problems. The test facility (SWAT-3) simulating Monju's SG on the scale of 1/2.5 was designed, fabricated and installed by IHI at Oarai Engineering Center of PNC, its pre-operation being accomplished in February 1975. The purpose of SWAT-3 is summarized as follows: (1) To perform an overall test on the safety of Monju's SG and intermediate heat transport system under the design condition against sodium-water reaction accidents. (2) To investigate the damage of the SG structure caused by the sodium-water reaction, and the possibility of repair and recovery operations. The first test was accomplished successfully on June 9, 1975. As a result of the test, the fundamental function of this test facility was proven to be satisfactory as expected. (auth.)

Basic reactions of osteoblasts on structured material surfaces

Directory of Open Access Journals (Sweden)

U. Meyer

2005-04-01

Full Text Available In order to assess how bone substitute materials determine bone formation in vivo it is useful to understand the mechanisms of the material surface/tissue interaction on a cellular level. Artificial materials are used in two applications, as biomaterials alone or as a scaffold for osteoblasts in a tissue engineering approach. Recently, many efforts have been undertaken to improve bone regeneration by the use of structured material surfaces. In vitro studies of bone cell responses to artificial materials are the basic tool to determine these interactions. Surface properties of materials surfaces as well as biophysical constraints at the biomaterial surface are of major importance since these features will direct the cell responses. Studies on osteoblast-like cell reactivity towards materials will have to focus on the different steps of protein and cell reactions towards defined surface properties. The introduction of new techniques allows nowadays the fabrication of materials with ordered surface structures. This paper gives a review of present knowledge on the various stages of osteoblast reactions on material surfaces, focused on basic cell events under in vitro conditions. Special emphasis is given to cellular reactions towards ordered nano-sized topographies.

Density functional studies of functionalized graphitic materials with late transition metals for oxygen reduction reactions

DEFF Research Database (Denmark)

Vallejo, Federico Calle; Martinez, Jose Ignacio; Rossmeisl, Jan

2011-01-01

Low-temperature fuel cells are appealing alternatives to the conventional internal combustion engines for transportation applications. However, in order for them to be commercially viable, effective, stable and low-cost electrocatalysts are needed for the Oxygen Reduction Reaction (ORR) at the ca...

A cost-effectiveness analysis of celecoxib compared with diclofenac in the treatment of pain in osteoarthritis (OA) within the Swedish health system using an adaptation of the NICE OA model.

Science.gov (United States)

Brereton, Nicholas; Pennington, Becky; Ekelund, Mats; Akehurst, Ronald

2014-09-01

Celecoxib for the treatment of pain resulting from osteoarthritis (OA) was reviewed by the Tandvårds- och läkemedelsförmånsverket-Dental and Pharmaceutical Benefits Board (TLV) in Sweden in late 2010. This study aimed to evaluate the incremental cost-effectiveness ratio (ICER) of celecoxib plus a proton pump inhibitor (PPI) compared to diclofenac plus a PPI in a Swedish setting. The National Institute for Health and Care Excellence (NICE) in the UK developed a health economic model as part of their 2008 assessment of treatments for OA. In this analysis, the model was reconstructed and adapted to a Swedish perspective. Drug costs were updated using the TLV database. Adverse event costs were calculated using the regional price list of Southern Sweden and the standard treatment guidelines from the county council of Stockholm. Costs for treating cardiovascular (CV) events were taken from the Swedish DRG codes and the literature. Over a patient's lifetime treatment with celecoxib plus a PPI was associated with a quality-adjusted life year (QALY) gain of 0.006 per patient when compared to diclofenac plus a PPI. There was an increase in discounted costs of 529 kr per patient, which resulted in an incremental cost-effectiveness ratio (ICER) of 82,313 kr ($12,141). Sensitivity analysis showed that treatment was more cost effective in patients with an increased risk of bleeding or gastrointestinal (GI) complications. The results suggest that celecoxib plus a PPI is a cost effective treatment for OA when compared to diclofenac plus a PPI. Treatment is shown to be more cost effective in Sweden for patients with a high risk of bleeding or GI complications. It was in this population that the TLV gave a positive recommendation. There are known limitations on efficacy in the original NICE model.

Implementation of a new data acquisition and exclusive measurement of the reaction vector pp → ppπ+π- at the time of flight spectrometer COSY-TOF

International Nuclear Information System (INIS)

Erhardt, Arthur

2009-01-01

The two-pion production pp ppπ + π - was measured exclusively at T p =793 MeV using the short version of the COSY-TOF spectrometer. In this measurement both the new EMS-based data acquisition system and a delayed pulse technique have been used, which, in addition to particle identification, energy, time of flight, and angle determination provides pi+ identification for pions in the theta lab range from 2 to 28 degrees. The measured total cross section for this reaction is σ=4.1(4) μb at T p =793 MeV. Due to an improved efficiency correction, the earlier measured total cross section has been corrected to σ=1.6 μb at T p =747 MeV. This value agrees nicely with the results from WASA/PROMICE. The data are compared to previous data and theoretical models which have been developed to understand the results from WASA/PROMICE measurements. The measurements have been carried out with transversally polarized proton beam which made it possible to determine analyzing powers for different subsystems of the two pion production reaction. In contrast to predictions we find significant analyzing power values up to A y =0.3. The data in the range of Roper excitation confirm that the dominating π π decay channel is N * →Nσ. (orig.)

Reconstitution of Low Bandwidth Reaction History

International Nuclear Information System (INIS)

May, M.; Clancy, T.; Fittinghoff, D.; Gennaro, P.; Hagans, K.; Halvorson, G.; Lowry, M.; Perry, T.; Roberson, P.; Smith, D.; Teruya, A.; Blair, J.; Davis, B.; Hunt, E.; Emkeit, B.; Galbraith, J.; Kelly, B.; Montoya, R.; Nickel, G.; Ogle, J.; Wilson, K.; Wood, M.

2004-01-01

-bandwidth reaction history. The first step in the reconstitution of reaction history was thus naturally the reconstitution of the loW--bandwidth capability in FY04. This will be followed in FY06 by the reconstitution of the high bandwidth capability. The reconstitution of the loW--bandwidth reaction history measurement was done in several phases. First the status of legacy equipment has been ascertained. Existing detectors, cables, and recording systems have been inventoried, characterized and, for the most part, satisfied the specifications of the test program and are still useable. The ability to obtain replacement equipment is now available. Modern loW--bandwidth fiber optic recording equipment which was similar to systems used on the old tests, has been evaluated. The ability to characterize and calibrate detectors and other components has been reestablished. New scientists and engineers have been working with designated mentors. These mentors participated on numerous shots during the old test program. Finally as a proof test, two hypothetical test scenarios were proposed: one each from LLNL and LANL. The LANL event was called ALPHA and the LLNL event was called POPOUT. The reaction history diagnostics for these two hypothetical underground tests were completely laid out and analyzed to make sure that the diagnostic could be successfully fielded within a 24 month time frame. In addition as part of a training exercise a reaction history trailer was reconstituted. This system was configured using a combination of new and experienced technical personnel and data analysts in collaboration with LLNL and LANL event physicists

A framework to measure the availability of engineered nanoparticles in soils

NARCIS (Netherlands)

Rodrigues, S.M.; Trindade, T.; Duarte, A.C.; Pereira, E.; Koopmans, G.F.; Römkens, P.F.A.M.

2016-01-01

In this study, the reactions of engineered nanoparticles (ENPs) in soils, with respect to their nanospecific properties, and observed effects of key soil properties (e.g. pH, ionic strength and natural colloids) on their stability in pore water are discussed. Key processes include aggregation and

Engineering to Control Noise, Loading, and Optimal Operating Points

International Nuclear Information System (INIS)

Mitchell R. Swartz

2000-01-01

Successful engineering of low-energy nuclear systems requires control of noise, loading, and optimum operating point (OOP) manifolds. The latter result from the biphasic system response of low-energy nuclear reaction (LENR)/cold fusion systems, and their ash production rate, to input electrical power. Knowledge of the optimal operating point manifold can improve the reproducibility and efficacy of these systems in several ways. Improved control of noise, loading, and peak production rates is available through the study, and use, of OOP manifolds. Engineering of systems toward the OOP-manifold drive-point peak may, with inclusion of geometric factors, permit more accurate uniform determinations of the calibrated activity of these materials/systems

Thermal and Mechanical Design Aspects of the LIFE Engine

Energy Technology Data Exchange (ETDEWEB)

Abbott, R P; Gerhard, M A; Latkowski, J F; Kramer, K J; Morris, K R; Peterson, P F; Seifried, J E

2008-10-25

The Laser Inertial confinement fusion - Fission Energy (LIFE) engine encompasses the components of a LIFE power plant responsible for converting the thermal energy of fusion and fission reactions into electricity. The design and integration of these components must satisfy a challenging set of requirements driven by nuclear, thermal, geometric, structural, and materials considerations. This paper details a self-consistent configuration for the LIFE engine along with the methods and technologies selected to meet these stringent requirements. Included is discussion of plant layout, coolant flow dynamics, fuel temperatures, expected structural stresses, power cycle efficiencies, and first wall survival threats. Further research and to understand and resolve outstanding issues is also outlined.

Engineering redox homeostasis to develop efficient alcohol-producing microbial cell factories.

Science.gov (United States)

Zhao, Chunhua; Zhao, Qiuwei; Li, Yin; Zhang, Yanping

2017-06-24

The biosynthetic pathways of most alcohols are linked to intracellular redox homeostasis, which is crucial for life. This crucial balance is primarily controlled by the generation of reducing equivalents, as well as the (reduction)-oxidation metabolic cycle and the thiol redox homeostasis system. As a main oxidation pathway of reducing equivalents, the biosynthesis of most alcohols includes redox reactions, which are dependent on cofactors such as NADH or NADPH. Thus, when engineering alcohol-producing strains, the availability of cofactors and redox homeostasis must be considered. In this review, recent advances on the engineering of cellular redox homeostasis systems to accelerate alcohol biosynthesis are summarized. Recent approaches include improving cofactor availability, manipulating the affinity of redox enzymes to specific cofactors, as well as globally controlling redox reactions, indicating the power of these approaches, and opening a path towards improving the production of a number of different industrially-relevant alcohols in the near future.

Global reaction mechanism for the auto-ignition of full boiling range gasoline and kerosene fuels

Science.gov (United States)

Vandersickel, A.; Wright, Y. M.; Boulouchos, K.

2013-12-01

Compact reaction schemes capable of predicting auto-ignition are a prerequisite for the development of strategies to control and optimise homogeneous charge compression ignition (HCCI) engines. In particular for full boiling range fuels exhibiting two stage ignition a tremendous demand exists in the engine development community. The present paper therefore meticulously assesses a previous 7-step reaction scheme developed to predict auto-ignition for four hydrocarbon blends and proposes an important extension of the model constant optimisation procedure, allowing for the model to capture not only ignition delays, but also the evolutions of representative intermediates and heat release rates for a variety of full boiling range fuels. Additionally, an extensive validation of the later evolutions by means of various detailed n-heptane reaction mechanisms from literature has been presented; both for perfectly homogeneous, as well as non-premixed/stratified HCCI conditions. Finally, the models potential to simulate the auto-ignition of various full boiling range fuels is demonstrated by means of experimental shock tube data for six strongly differing fuels, containing e.g. up to 46.7% cyclo-alkanes, 20% napthalenes or complex branched aromatics such as methyl- or ethyl-napthalene. The good predictive capability observed for each of the validation cases as well as the successful parameterisation for each of the six fuels, indicate that the model could, in principle, be applied to any hydrocarbon fuel, providing suitable adjustments to the model parameters are carried out. Combined with the optimisation strategy presented, the model therefore constitutes a major step towards the inclusion of real fuel kinetics into full scale HCCI engine simulations.

Results and code prediction comparisons of lithium-air reaction and aerosol behavior tests

International Nuclear Information System (INIS)

Jeppson, D.W.

1986-03-01

The Hanford Engineering Development Laboratory (HEDL) Fusion Safety Support Studies include evaluation of potential safety and environmental concerns associated with the use of liquid lithium as a breeder and coolant for fusion reactors. Potential mechanisms for volatilization and transport of radioactive metallic species associated with breeder materials are of particular interest. Liquid lithium pool-air reaction and aerosol behavior tests were conducted with lithium masses up to 100 kg within the 850-m 3 containment vessel in the Containment Systems Test Facility. Lithium-air reaction rates, aerosol generation rates, aerosol behavior and characterization, as well as containment atmosphere temperature and pressure responses were determined. Pool-air reaction and aerosol behavior test results were compared with computer code calculations for reaction rates, containment atmosphere response, and aerosol behavior. The volatility of potentially radioactive metallic species from a lithium pool-air reaction was measured. The response of various aerosol detectors to the aerosol generated was determined. Liquid lithium spray tests in air and in nitrogen atmospheres were conducted with lithium temperatures of about 427 0 and 650 0 C. Lithium reaction rates, containment atmosphere response, and aerosol generation and characterization were determined for these spray tests

NASA Innovations in Climate Education Connects Audiences Coast-to-Coast for Climate Literacy via the NASA Digital Learning Network

Science.gov (United States)

Murray, B.; Barnes, M. H.; Chambers, L. H.; Pippin, M. R.; Martin, A. M.; Geyer, A. J.; Leber, M.; Joyner, E.; Small, C.; Dublin, D.

2013-12-01

The Minority University Research and Education Program (MUREP) NASA Innovations in Climate Education (NICE) project advances NASA's Office of Education's strategic initiative to improve the quality of the nation's Science, Technology, Engineering and Mathematics (STEM) education and enhance literacy about climate and other Earth systems environmental changes. NICE also strategically supports the United States' progressive initiative to enhance the science and technology enterprise for successful competition in the 21st century global community. To extend to wider networks in 2013, MUREP NICE partnered with the NASA Digital Learning Network (DLNTM) in a unique, non-traditional collaborative model to significantly increase the impact and connection with formal and informal educators, curriculum developers, science education specialists, and researchers regarding climate literacy. DLN offers an expansive distance learning capability that bridges presenters with education audiences for interactive, web-based, synchronous and asynchronous Educator Professional Development (EPD). DLN services over 10,000 educators each year. In 3rd quarter FY13 alone DLN totaled 3,361 connections with educators. The DLN allows for cost effective (no travel) engagement of multiple geographically dispersed audiences with presenters from remote locations. This facilitates interactive communication among participants through distance education, allowing them to share local experiences with one another. A comprehensive four-part EPD workshop, featuring several NICE Principal Investigators (PI) and NASA subject matter experts was developed for NICE in April 2013. Topics covered in the workshop progressed from a simple introduction of Earth's energy budget, through explanation of temperature data collection and evidence of temperature rise, impacts on phenology, and finally consequences for bugs and birds. This event was an innovative hybrid workshop, connecting onsite teachers interactively

Experimental Evaluation of Acoustic Engine Liner Models Developed with COMSOL Multiphysics

Science.gov (United States)

Schiller, Noah H.; Jones, Michael G.; Bertolucci, Brandon

2017-01-01

Accurate modeling tools are needed to design new engine liners capable of reducing aircraft noise. The purpose of this study is to determine if a commercially-available finite element package, COMSOL Multiphysics, can be used to accurately model a range of different acoustic engine liner designs, and in the process, collect and document a benchmark dataset that can be used in both current and future code evaluation activities. To achieve these goals, a variety of liner samples, ranging from conventional perforate-over-honeycomb to extended-reaction designs, were installed in one wall of the grazing flow impedance tube at the NASA Langley Research Center. The liners were exposed to high sound pressure levels and grazing flow, and the effect of the liner on the sound field in the flow duct was measured. These measurements were then compared with predictions. While this report only includes comparisons for a subset of the configurations, the full database of all measurements and predictions is available in electronic format upon request. The results demonstrate that both conventional perforate-over-honeycomb and extended-reaction liners can be accurately modeled using COMSOL. Therefore, this modeling tool can be used with confidence to supplement the current suite of acoustic propagation codes, and ultimately develop new acoustic engine liners designed to reduce aircraft noise.

Effects of MicroCAD on Learning Fundamental Engineering Graphical Concepts: A Qualitative Study.

Science.gov (United States)

Leach, James A.; Gull, Randall L.

1990-01-01

Students' reactions and performances were examined when taught engineering geometry concepts using a standard microcomputer-aided drafting software package. Two sample groups were compared based on their computer experience. Included are the methodology, data analysis, and conclusions. (KR)

Advanced Precursor Reaction Processing for Cu(InGa)(SeS)2 Solar Cells

Energy Technology Data Exchange (ETDEWEB)

Shafarman, William N. [Univ. of Delaware, Newark, DE (United States)

2015-10-12

This project “Advanced Precursor Reaction Processing for Cu(InGa)(SeS)2 Solar Cells”, completed by the Institute of Energy Conversion (IEC) at the University of Delaware in collaboration with the Department of Chemical Engineering at the University of Florida, developed the fundamental understanding and technology to increase module efficiency and improve the manufacturability of Cu(InGa)(SeS)2 films using the precursor reaction approach currently being developed by a number of companies. Key results included: (1) development of a three-step H2Se/Ar/H2S reaction process to control Ga distribution through the film and minimizes back contact MoSe2 formation; (2) Ag-alloying to improve precursor homogeneity by avoiding In phase agglomeration, faster reaction and improved adhesion to allow wider reaction process window; (3) addition of Sb, Bi, and Te interlayers at the Mo/precursor junction to produce more uniform precursor morphology and improve adhesion with reduced void formation in reacted films; (4) a precursor structure containing Se and a reaction process to reduce processing time to 5 minutes and eliminate H2Se usage, thereby increasing throughput and reducing costs. All these results were supported by detailed characterization of the film growth, reaction pathways, thermodynamic assessment and device behavior.

Coupled modelling (transport-reaction) of the fluid-clay interactions and their feed back on the physical properties of the bentonite engineered clay barrier system

International Nuclear Information System (INIS)

Marty, N.

2006-11-01

The originality of this work is to process feed back effects of mineralogical and chemical modifications of clays, in storage conditions, on their physical properties and therefore on their transport characteristics (porosity, molecular diffusion, permeability). These feed back effects are modelled using the KIRMAT code (Kinetic of Reaction and MAss Transfer) developed from the kinetic code KINDIS by adding the effect of water renewal in the mineral-solution reactive cells. KIRMAT resolves mass balance equations associated with mass transport together with the geochemical reactions in a 1D approach. After 100 000 years of simulated interaction at 100 C, with the fluid of the Callovo-Oxfordian geological level (COX) and with iron provided by the steel overpack corrosion, the montmorillonite of the clay barrier is only partially transformed (into illite, chlorite, saponite...). Only outer parts of the modelled profile seem to be significantly affected by smectite dissolution processes, mainly at the interface with the geological environment. The modifications of physical properties show a closure of the porosity at the boundaries of the barrier, by creating a decrease of mass transport by molecular diffusion, essentially at the interface with the iron. Permeability laws applied to this system show a decrease of the hydraulic conductivity correlated with the porosity evolution. Near the COX, the swelling pressure of the clays from the barrier decreases. In the major part of the modelled profile, the engineered clay barrier system seems to keep its initial physical properties (porosity, molecular diffusion, permeability, swelling pressure) and functionalities. (author)

Expanding the enzyme universe: accessing non-natural reactions by mechanism-guided directed evolution.

Science.gov (United States)

Renata, Hans; Wang, Z Jane; Arnold, Frances H

2015-03-09

High selectivity and exquisite control over the outcome of reactions entice chemists to use biocatalysts in organic synthesis. However, many useful reactions are not accessible because they are not in nature's known repertoire. In this Review, we outline an evolutionary approach to engineering enzymes to catalyze reactions not found in nature. We begin with examples of how nature has discovered new catalytic functions and how such evolutionary progression has been recapitulated in the laboratory starting from extant enzymes. We then examine non-native enzyme activities that have been exploited for chemical synthesis, with an emphasis on reactions that do not have natural counterparts. Non-natural activities can be improved by directed evolution, thus mimicking the process used by nature to create new catalysts. Finally, we describe the discovery of non-native catalytic functions that may provide future opportunities for the expansion of the enzyme universe. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Engineering the spatial organization of metabolic pathways

DEFF Research Database (Denmark)

Albertsen, Line; Maury, Jerome; Bach, Lars Stougaard

One of the goals of metabolic engineering is to optimize the production of valuable metabolites in cell factories. In this context, modulating the gene expression and activity of enzymes are tools that have been extensively used. Another approach that is gaining interest is the engineering...... of the spatial organization of biosynthetic pathways. Several natural systems for ensuring optimal spatial arrangement of biosynthetic enzymes exist. Sequentially acting enzymes can for example be positioned in close proximity by attachment to cellular structures, up-concentration in membrane enclosed organelles...... or assembly into large complexes. The vision is that by positioning sequentially acting enzymes in close proximity, the cell can accelerate reaction rates and thereby prevent loss of intermediates through diffusion, degradation or competing pathways. The production of valuable metabolites in cell factories...

Vodní malakofauna dolního toku Lužnice se zaměřením na stav populace velevruba tupého (Unio crassus Aquatic molluscan fauna of the lower part of the Lužnice River (South Bohemia, Czech Republic with focus on the population of Unio crassus

Directory of Open Access Journals (Sweden)

Luboš Beran

2012-02-01

Full Text Available This paper presents results of a malacological survey of the Lužnice River in ca 70 km long stretch between the inflow of its main tributary the Nežárka River in Veselí nad Lužnicí and its confluence with the Vltava River in Southern Bohemia (Czech Republic. Thirty-one species of aquatic molluscs (19 gastropods, 12 bivalves representing 40% of freshwater molluscan fauna of the Czech Republic were found at 15 sites. Differences of molluscan assemblages upstream and downstream of Tábor town were probably caused by different characters of the watercourse. The occurrence of rare bivalve Pseudanodonta complanata was confirmed. On the other hand, two non-native species Physella acuta and Sinanodonta woodiana were recorded. The research was preferentially focused on the population of the endangered bivalve Unio crassus. Its occurrence was confirmed at 8 from 15 sites under study but altogether only 31 individuals were found. Less than four specimens were found at particular sites but one.

Renal tract abnormalities missed in a historical cohort of young children with UTI if the NICE and AAP imaging guidelines were applied.

Science.gov (United States)

Narchi, Hassib; Marah, Muhaned; Khan, Asad Aziz; Al-Amri, Abdulla; Al-Shibli, Amar

2015-10-01

In a historical cohort of children with a urinary tract infection (UTI) who had already undergone all the imaging procedures, the aim was to determine renal tract abnormalities which would have been missed had we implemented the new guidelines from the National Institute for Health and Care Excellence in the United Kingdom (NICE) or the American Academy of Pediatrics (AAP). After a UTI episode, forty-three children (28 females, 65%) aged between 2 months and 2 years presenting at two general hospitals with a febrile UTI before 2008 underwent all the recommended imaging studies predating the new guidelines. Hydronephrosis was defined and graded according to the Society for Fetal Urology (SFU) classification. Hydronephrosis grade II (mild pelvicalyceal dilatation), grade III (moderate dilatation), and grade IV (gross dilatation with thinning of the renal cortex), duplication, vesicoureteral reflux (VUR) grade II and above, renal scarring and reduced renal uptake (<45%) on technetium-99m-labeled dimercaptosuccinic acid (DMSA) scintigraphy were considered significant abnormalities. We calculated the proportion of abnormalities which would have been missed had the new guidelines been used instead. The median of age was 7.6 months (mean 8.7, range 2-24 months), with the majority (n = 37, 86%) being under 1 year of age. Ultrasound (US) showed hydronephrosis in 14 (32%), all grade II. A voiding cystourethrogram (VCUG) was performed in all and showed VUR ≥ grade II in 16 (37%), including eight children (19%) where it was bilateral. DMSA scan showed scarring in 25 children (58%) of whom 11 (26%) had bilateral scars. Reduced differential renal uptake was present in 10 children (23%). Of the 29 children with normal US, 18 (62%) had renal scarring and nine (31%) had VUR ≥ grade II. The NICE guidelines would have missed 63% of the children with VUR ≥ grade II, including a high proportion of grades IV and V VUR, 44% of the children with renal scarring, and 20% of the

Engineering genetic circuit interactions within and between synthetic minimal cells

Science.gov (United States)

Adamala, Katarzyna P.; Martin-Alarcon, Daniel A.; Guthrie-Honea, Katriona R.; Boyden, Edward S.

2017-05-01

Genetic circuits and reaction cascades are of great importance for synthetic biology, biochemistry and bioengineering. An open question is how to maximize the modularity of their design to enable the integration of different reaction networks and to optimize their scalability and flexibility. One option is encapsulation within liposomes, which enables chemical reactions to proceed in well-isolated environments. Here we adapt liposome encapsulation to enable the modular, controlled compartmentalization of genetic circuits and cascades. We demonstrate that it is possible to engineer genetic circuit-containing synthetic minimal cells (synells) to contain multiple-part genetic cascades, and that these cascades can be controlled by external signals as well as inter-liposomal communication without crosstalk. We also show that liposomes that contain different cascades can be fused in a controlled way so that the products of incompatible reactions can be brought together. Synells thus enable a more modular creation of synthetic biology cascades, an essential step towards their ultimate programmability.

The pick-up mechanism in composite particle emission processes

International Nuclear Information System (INIS)

Zhang Jingshang; Yan Shiwei; Wang Cuilan

1992-01-01

The pick-up mechanism has been included in the exciton model for the light composite particle emissions. Based on the cluster phase space integration method the formation probabilities of α,d,t, 3 He are obtained. The calculation results of (n,t) cross sections indicate that this theoretical method can reproduce the experimental data nicely. For triton emissions in pre-equilibrium reaction processes, the semi-direct reactions are the dominant terms which are just omitted in the previous model calculation

Development of Implantable Medical Devices: From an Engineering Perspective

Directory of Open Access Journals (Sweden)

Yeun-Ho Joung

2013-09-01

Full Text Available From the first pacemaker implant in 1958, numerous engineering and medical activities for implantable medical device development have faced challenges in materials, battery power, functionality, electrical power consumption, size shrinkage, system delivery, and wireless communication. With explosive advances in scientific and engineering technology, many implantable medical devices such as the pacemaker, cochlear implant, and real-time blood pressure sensors have been developed and improved. This trend of progress in medical devices will continue because of the coming super-aged society, which will result in more consumers for the devices. The inner body is a special space filled with electrical, chemical, mechanical, and marine-salted reactions. Therefore, electrical connectivity and communication, corrosion, robustness, and hermeticity are key factors to be considered during the development stage. The main participants in the development stage are the user, the medical staff, and the engineer or technician. Thus, there are three different viewpoints in the development of implantable devices. In this review paper, considerations in the development of implantable medical devices will be presented from the viewpoint of an engineering mind.

Energy Considerations for Plasma-Assisted N-Fixation Reactions

Directory of Open Access Journals (Sweden)

Aikaterini Anastasopoulou

2014-09-01

Full Text Available In a time of increasing concerns about the immense energy consumption and poor environmental performance of contemporary processes in the chemical industry, there is great need to develop novel sustainable technologies that enhance energy efficiency. There is abundant chemical literature on process innovations (laboratory-scale around the plasma reactor itself, which, naturally, is the essential part to be intensified to achieve a satisfactory process. In essence, a plasma process needs attention beyond reaction engineering towards the process integration side and also with strong electrical engineering focus. In this mini-review, we have detailed our future focus on the process and energy intensification of plasma-based N-fixation. Three focal points are mainly stressed throughout the review: (I the integration of renewable energy; (II the power supply system of plasma reactors and (III process design of industrial plasma-assisted nitrogen fixation. These different enabling strategies will be set in a holistic and synergetic picture so as to improve process performance.

Roles of plasma neutron source reactor in development of fusion reactor engineering: Comparison with fission reactor engineering

International Nuclear Information System (INIS)

Hirayama, Shoichi; Kawabe, Takaya

1995-01-01

The history of development of fusion power reactor has come to a turning point, where the main research target is now shifting from the plasma heating and confinement physics toward the burning plasma physics and reactor engineering. Although the development of fusion reactor system is the first time for human beings, engineers have experience of development of fission power reactor. The common feature between them is that both are plants used for the generation of nuclear reactions for the production of energy, nucleon, and radiation on an industrial scale. By studying the history of the development of the fission reactor, one can find the existence of experimental neutron reactors including irradiation facilities for fission reactor materials. These research neutron reactors played very important roles in the development of fission power reactors. When one considers the strategy of development of fusion power reactors from the points of fusion reactor engineering, one finds that the fusion neutron source corresponds to the neutron reactor in fission reactor development. In this paper, the authors discuss the roles of the plasma-based neutron source reactors in the development of fusion reactor engineering, by comparing it with the neutron reactors in the history of fission power development, and make proposals for the strategy of the fusion reactor development. 21 refs., 6 figs

MANAGING CONFLICT IN ENGINEERING PROJECTS: NEW ZEALAND EXPERIENCES

Directory of Open Access Journals (Sweden)

Nicola Naismith

2016-07-01

Full Text Available There is a wealth of knowledge concerning conflict management and its resolution in the workplace, however there is a dearth of information relating to conflict management and its resolution in engineering project management. This paper set out to examine the reality of conflict management in engineering project management in New Zealand. This was achieved through a review of credible literature sources and the completion of a pilot study to gain subject matter expert perspectives. The research suggests that conflicts can be destructive, resulting in anxiety and strong emotional responses leading to reflexive reactions including avoidance, aggression, fight, hostility and a breakdown in communications and relationships. Findings indicate that managing a project structure is synonymous with handling conflict and these disagreements can be detrimental to the success of a project. The initial results suggest that a number of factors act as drivers of conflict in engineering projects in New Zealand. These drivers are: power, personality, group dynamics and organisation culture. The conflict resolution tools cited as being widely used for engineering projects are collaboration and negotiation. The paper also offers recommendations for future research.

A proposed community reaction-wall facility at the JRC Ispra

Energy Technology Data Exchange (ETDEWEB)

Jones, P M; Donea, J [Commission of the European Communities, Joint Research Centre - Ispra Establishment Applied Mechanics Division, Ispra (Italy)

1988-07-01

The paper describes a large-size structural laboratory based on a reaction-wall facility proposed for the JRC Ispra establishment. It is foreseen that this will be used for large and full-scale testing of a wide variety of structures and components in the fields of civil/structural, mechanical, and geotechnical engineering. After briefly reviewing the background market research done to establish the needs for a large central facility in the Community, the main advantages and limitations of reaction-wall testing in comparison with other experimental techniques are summarized. The main characteristics of the proposed facility are then given followed by the identified fields of research in which significant tests can be performed. Finally, the proposed method of implementing an integral programme of work within the European Community member states is presented. (author)

A proposed community reaction-wall facility at the JRC Ispra

International Nuclear Information System (INIS)

Jones, P.M.; Donea, J.

1988-01-01

The paper describes a large-size structural laboratory based on a reaction-wall facility proposed for the JRC Ispra establishment. It is foreseen that this will be used for large and full-scale testing of a wide variety of structures and components in the fields of civil/structural, mechanical, and geotechnical engineering. After briefly reviewing the background market research done to establish the needs for a large central facility in the Community, the main advantages and limitations of reaction-wall testing in comparison with other experimental techniques are summarized. The main characteristics of the proposed facility are then given followed by the identified fields of research in which significant tests can be performed. Finally, the proposed method of implementing an integral programme of work within the European Community member states is presented. (author)

Dynamic characterization of partially saturated engineered porous media and gas diffusion layers using hydraulic admittance

Science.gov (United States)

Cheung, Perry; Fairweather, Joseph D.; Schwartz, Daniel T.

2012-09-01

Simple laboratory methods for determining liquid water distribution in polymer electrolyte membrane fuel cell gas diffusion layers (GDLs) are needed to engineer better GDL materials. Capillary pressure vs. liquid saturation measurements are attractive, but lack the ability to probe the hydraulic interconnectivity and distribution within the pore structure. Hydraulic admittance measurements of simple capillary bundles have recently been shown to nicely measure characteristics of the free-interfaces and hydraulic path. Here we examine the use of hydraulic admittance with a succession of increasingly complex porous media, starting with a laser-drilled sample with 154 asymmetric pores and progress to the behavior of Toray TGP-H090 carbon papers. The asymmetric laser-drilled sample clearly shows hydraulic admittance measurements are sensitive to sample orientation, especially when examined as a function of saturation state. Finite element modeling of the hydraulic admittance is consistent with experimental measurements. The hydraulic admittance spectra from GDL samples are complex, so we examine trends in the spectra as a function of wet proofing (0% and 40% Teflon loadings) as well as saturation state of the GDL. The presence of clear peaks in the admittance spectra for both GDL samples suggests a few pore types are largely responsible for transporting liquid water.

Obtaining isochrones from pollution signals in a fluvial sediment record: A case study in a uranium-polluted floodplain of the Ploučnice River, Czech Republic

International Nuclear Information System (INIS)

Matys Grygar, T.; Elznicová, J.; Bábek, O.; Hošek, M.; Engel, Z.; Kiss, T.

2014-01-01

Highlights: • Integrated approach to assess pollutant distribution in floodplain. • Natural background concentration is a function and not a value. • Concept of local enrichment factors based on local background functions. • Secondary pollution from transient fluvial deposits. - Abstract: Uranium mining and processing in the watershed of the Ploučnice River in the Czech Republic during a well-defined time interval (1969–1989) allowed for a study of pollutant fates in sediments of a meandering river that is otherwise in a nearly natural state. A considerable part of the primary pollution is present in hotspots in the floodplain 10–15 km downstream from the mining district. One of the hotspots was characterised using geoinformatic, geophysical and geochemical means. The floodplain geomorphology and architecture and river channel dynamics were studied to develop an understanding of the formation of the hotspot and evaluate further movement of pollutants in the river system. Local background functions (with Rb or Ti as a predictor) and local enrichment factors (LEFs) were obtained for Ba, Ni, Pb, U and Zn concentrations in unpolluted sediments from the deeper strata of the active floodplain, an abandoned floodplain and an ancient terrace. The most recent (2013) overbank fines in the study area are still considerably enriched in Ni, U and Zn (LEF 3, 6 and 8, respectively), and thus pollution by heavy metals several km downstream of the hotspots continuously increases even though the primary source of pollution was terminated more than 20 years ago. The onset of the primary pollution (the base of the polluted strata) is hence clearly identified in the distal floodplain sediments as persistent and a potentially isochronous pollution signal in the fluvial record, whereas a secondary pollution signal overwrites the expected “primary pollution climax” and “pollution improvement” signals. That inertia of the fluvial system can also be expected in other

Thin Sea Ice, Thick Snow, and Widespread Negative Freeboard Observed During N-ICE2015 North of Svalbard

Science.gov (United States)

Rösel, Anja; Itkin, Polona; King, Jennifer; Divine, Dmitry; Wang, Caixin; Granskog, Mats A.; Krumpen, Thomas; Gerland, Sebastian

2018-02-01

In recent years, sea-ice conditions in the Arctic Ocean changed substantially toward a younger and thinner sea-ice cover. To capture the scope of these changes and identify the differences between individual regions, in situ observations from expeditions are a valuable data source. We present a continuous time series of in situ measurements from the N-ICE2015 expedition from January to June 2015 in the Arctic Basin north of Svalbard, comprising snow buoy and ice mass balance buoy data and local and regional data gained from electromagnetic induction (EM) surveys and snow probe measurements from four distinct drifts. The observed mean snow depth of 0.53 m for April to early June is 73% above the average value of 0.30 m from historical and recent observations in this region, covering the years 1955-2017. The modal total ice and snow thicknesses, of 1.6 and 1.7 m measured with ground-based EM and airborne EM measurements in April, May, and June 2015, respectively, lie below the values ranging from 1.8 to 2.7 m, reported in historical observations from the same region and time of year. The thick snow cover slows thermodynamic growth of the underlying sea ice. In combination with a thin sea-ice cover this leads to an imbalance between snow and ice thickness, which causes widespread negative freeboard with subsequent flooding and a potential for snow-ice formation. With certainty, 29% of randomly located drill holes on level ice had negative freeboard.

Experimental study of DI diesel engine performance using biodiesel blends with kerosene

Energy Technology Data Exchange (ETDEWEB)

Azad, A.K.; Ameer Uddin, S.M.; Alam, M.M. [Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka-1000 (Bangladesh)

2013-07-01

The experimental investigation offers a comprehensive study of DI diesel engine performance using bio-diesel from mustard oil blends with kerosene. The vegetable oil without trans-esterification reaction have been blended with kerosene oil by volume in some percentage like 20%, 30%, 40% and 50% which have been named as M20 (20% mustard, 80% kerosene), M30 (30% mustard, 70% kerosene), M40 (40% mustard, 60% kerosene) and M50 (50% mustard, 50% kerosene). The properties of the bio-fuel blended with kerosene have been tested in the laboratories with maintaining different ASTM standards. Then a four stroke, single cylinder, direct injection diesel engine has been mounted on the dynamometer bed for testing the performance of the engine using the bio-diesel blends. Several engine parameters like bsfc, bhp, break mean effective pressure, exhaust gas temperature, lube oil temperature, sound level etc. have been determined. A comparison has been made for engine performance of different bio-diesel blends with kerosene with the engine performance of diesel fuel.

Influence of granitic aggregates from Northeast Brazil on the alkali-aggregate reaction

Energy Technology Data Exchange (ETDEWEB)

Gomes Neto, David de Paiva; Santana, Rodrigo Soares de; Barreto, Ledjane Silva, E-mail: pvgomes@uol.com.br [Universidade Federal de Sergipe (UFS), Sao Cristovao, SE (Brazil). Dept. de Ciencias dos Materiais e Engenharia; Conceicao, Herbert; Lisboa, Vinicios Anselmo Carvalho [Universidade Federal de Sergipe (UFS), Sao Cristovao, SE (Brazil). Dept. de Geologia

2014-08-15

The alkali-aggregate reaction (AAR) in concrete structures is a problem that has concerned engineers and researchers for decades. This reaction occurs when silicates in the aggregates react with the alkalis, forming an expanded gel that can cause cracks in the concrete and reduce its lifespan. The aim of this study was to characterize three coarse granitic aggregates employed in concrete production in northeastern Brazil, correlating petrographic analysis with the kinetics of silica dissolution and the evolution of expansions in mortar bars, assisted by SEM/EDS, XRD, and EDX. The presence of grains showing recrystallization into individual microcrystalline quartz subgrains was associated with faster dissolution of silica and greater expansion in mortar bars. Aggregates showing substantial deformation, such as stretched grains of quartz with strong undulatory extinction, experienced slower dissolution, with reaction and expansion occurring over longer periods that could not be detected using accelerated tests with mortar bars. (author)

COEL: A Cloud-based Reaction Network Simulator

Directory of Open Access Journals (Sweden)

Peter eBanda

2016-04-01

Full Text Available Chemical Reaction Networks (CRNs are a formalism to describe the macroscopic behavior of chemical systems. We introduce COEL, a web- and cloud-based CRN simulation framework that does not require a local installation, runs simulations on a large computational grid, provides reliable database storage, and offers a visually pleasing and intuitive user interface. We present an overview of the underlying software, the technologies, and the main architectural approaches employed. Some of COEL's key features include ODE-based simulations of CRNs and multicompartment reaction networks with rich interaction options, a built-in plotting engine, automatic DNA-strand displacement transformation and visualization, SBML/Octave/Matlab export, and a built-in genetic-algorithm-based optimization toolbox for rate constants.COEL is an open-source project hosted on GitHub (http://dx.doi.org/10.5281/zenodo.46544, which allows interested research groups to deploy it on their own sever. Regular users can simply use the web instance at no cost at http://coel-sim.org. The framework is ideally suited for a collaborative use in both research and education.

Thermodynamics for Chemists, Physicists and Engineers

CERN Document Server

Hołyst, Robert

2012-01-01

Thermodynamics is an essential part of chemical physics and is of fundamental importance in physics, chemistry and engineering courses. This textbook takes an interdisciplinary approach to the subject and is therefore suitable for undergraduates in all those courses. The book is an introduction to phenomenological thermodynamics and its applications to phase transitions and chemical reactions, with some references to statistical mechanics. It strikes the balance between the rigorousness of the Callen text and phenomenological approach of the Atkins text. The book is divided in three parts. The first introduces the postulates and laws of thermodynamics and complements these initial explanations with practical examples. The second part is devoted to applications of thermodynamics to phase transitions in pure substances and mixtures. The third part covers thermodynamic systems in which chemical reactions take place. There are some sections on more advanced topics such as thermodynamic potentials, natural variabl...

An improved stochastic algorithm for temperature-dependent homogeneous gas phase reactions

CERN Document Server

Kraft, M

2003-01-01

We propose an improved stochastic algorithm for temperature-dependent homogeneous gas phase reactions. By combining forward and reverse reaction rates, a significant gain in computational efficiency is achieved. Two modifications of modelling the temperature dependence (with and without conservation of enthalpy) are introduced and studied quantitatively. The algorithm is tested for the combustion of n-heptane, which is a reference fuel component for internal combustion engines. The convergence of the algorithm is studied by a series of numerical experiments and the computational cost of the stochastic algorithm is compared with the DAE code DASSL. If less accuracy is needed the stochastic algorithm is faster on short simulation time intervals. The new stochastic algorithm is significantly faster than the original direct simulation algorithm in all cases considered.

Trans-methylation reactions in plants: focus on the activated methyl cycle.

Science.gov (United States)

Rahikainen, Moona; Alegre, Sara; Trotta, Andrea; Pascual, Jesús; Kangasjärvi, Saijaliisa

2018-02-01

Trans-methylation reactions are vital in basic metabolism, epigenetic regulation, RNA metabolism, and posttranslational control of protein function and therefore fundamental in determining the physiological processes in all living organisms. The plant kingdom is additionally characterized by the production of secondary metabolites that undergo specific hydroxylation, oxidation and methylation reactions to obtain a wide array of different chemical structures. Increasing research efforts have started to reveal the enzymatic pathways underlying the biosynthesis of complex metabolites in plants. Further engineering of these enzymatic machineries offers significant possibilities in the development of bio-based technologies, but necessitates deep understanding of their potential metabolic and regulatory interactions. Trans-methylation reactions are tightly coupled with the so-called activated methyl cycle (AMC), an essential metabolic circuit that maintains the trans-methylation capacity in all living cells. Tight regulation of the AMC is crucial in ensuring accurate trans-methylation reactions in different subcellular compartments, cell types, developmental stages and environmental conditions. This review addresses the organization and posttranslational regulation of the AMC and elaborates its critical role in determining metabolic regulation through modulation of methyl utilization in stress-exposed plants. © 2017 Scandinavian Plant Physiology Society.

Individual reactions to stress predict performance during a critical aviation incident.

Science.gov (United States)

Vine, Samuel J; Uiga, Liis; Lavric, Aureliu; Moore, Lee J; Tsaneva-Atanasova, Krasimira; Wilson, Mark R

2015-01-01

Understanding the influence of stress on human performance is of theoretical and practical importance. An individual's reaction to stress predicts their subsequent performance; with a "challenge" response to stress leading to better performance than a "threat" response. However, this contention has not been tested in truly stressful environments with highly skilled individuals. Furthermore, the effect of challenge and threat responses on attentional control during visuomotor tasks is poorly understood. Thus, this study aimed to examine individual reactions to stress and their influence on attentional control, among a cohort of commercial pilots performing a stressful flight assessment. Sixteen pilots performed an "engine failure on take-off" scenario, in a high-fidelity flight simulator. Reactions to stress were indexed via self-report; performance was assessed subjectively (flight instructor assessment) and objectively (simulator metrics); gaze behavior data were captured using a mobile eye tracker, and measures of attentional control were subsequently calculated (search rate, stimulus driven attention, and entropy). Hierarchical regression analyses revealed that a threat response was associated with poorer performance and disrupted attentional control. The findings add to previous research showing that individual reactions to stress influence performance and shed light on the processes through which stress influences performance.

Numerical Simulation of PAHs Formation and Effect of Operating Conditions in DI-Diesel Engines Based on a Comprehensive Chemical Mechanism

Directory of Open Access Journals (Sweden)

Bei-Jing Zhong

2013-01-01

Full Text Available Three-dimensional numerical simulations of polycyclic aromatic hydrocarbon (PAH formation in a Chaochai 6102bzl direct injection diesel engine are performed. n-Heptane is chosen as the fuel. A detailed mechanism, which includes 108 species and 572 elementary reactions that describe n-heptane oxidation and PAH formation, is proposed. A reduced kinetic mechanism, with only 86 reactions and 57 species, is developed and incorporated into computational fluid dynamics (CFD software for the numerical simulations. Results show that PAHs, which were mostly deposited at the bottom of the diesel combustion chamber wall, first increased and then decreased with the increase in diesel crank angle. Furthermore, the diesel engine operating conditions (intake vortex intensity, intake air pressure, fuel injection advance angle, diesel load, and engine speed had a significant effect on PAH formation.

Construction of combustion models for rapeseed methyl ester bio-diesel fuel for internal combustion engine applications.

Science.gov (United States)

Golovitchev, Valeri I; Yang, Junfeng

2009-01-01

Bio-diesel fuels are non-petroleum-based diesel fuels consisting of long chain alkyl esters produced by the transesterification of vegetable oils, that are intended for use (neat or blended with conventional fuels) in unmodified diesel engines. There have been few reports of studies proposing theoretical models for bio-diesel combustion simulations. In this study, we developed combustion models based on ones developed previously. We compiled the liquid fuel properties, and the existing detailed mechanism of methyl butanoate ester (MB, C(5)H(10)O(2)) oxidation was supplemented by sub-mechanisms for two proposed fuel constituent components, C(7)H(16) and C(7)H(8)O (and then, by mp2d, C(4)H(6)O(2) and propyne, C(3)H(4)) to represent the combustion model for rapeseed methyl ester described by the chemical formula, C(19)H(34)O(2) (or C(19)H(36)O(2)). The main fuel vapor thermal properties were taken as those of methyl palmitate C(19)H(36)O(2) in the NASA polynomial form of the Burcat database. The special global reaction was introduced to "crack" the main fuel into its constituent components. This general reaction included 309 species and 1472 reactions, including soot and NO(x) formation processes. The detailed combustion mechanism was validated using shock-tube ignition-delay data under diesel engine conditions. For constant volume and diesel engine (Volvo D12C) combustion modeling, this mechanism could be reduced to 88 species participating in 363 reactions.

Multifunctional Hydrogel with Good Structure Integrity, Self-Healing, and Tissue-Adhesive Property Formed by Combining Diels-Alder Click Reaction and Acylhydrazone Bond.

Science.gov (United States)

Yu, Feng; Cao, Xiaodong; Du, Jie; Wang, Gang; Chen, Xiaofeng

2015-11-04

Hydrogel, as a good cartilage tissue-engineered scaffold, not only has to possess robust mechanical property but also has to have an intrinsic self-healing property to integrate itself or the surrounding host cartilage. In this work a double cross-linked network (DN) was designed and prepared by combining Diels-Alder click reaction and acylhydrazone bond. The DA reaction maintained the hydrogel's structural integrity and mechanical strength in physiological environment, while the dynamic covalent acylhydrazone bond resulted in hydrogel's self-healing property and controlled the on-off switch of network cross-link density. At the same time, the aldehyde groups contained in hydrogel further promote good integration of the hydrogel to surrounding tissue based on aldehyde-amine Schiff-base reaction. This kind of hydrogel has good structural integrity, autonomous self-healing, and tissue-adhesive property and simultaneously will have a good application in tissue engineering and tissue repair field.

Expanding the Enzyme Universe: Accessing Non-Natural Reactions by Mechanism-Guided Directed Evolution

Science.gov (United States)

Renata, Hans; Wang, Z. Jane

2015-01-01

High selectivities and exquisite control over reaction outcomes entice chemists to use biocatalysts in organic synthesis. However, many useful reactions are not accessible because they are not in nature’s known repertoire. We will use this review to outline an evolutionary approach to engineering enzymes to catalyze reactions not found in nature. We begin with examples of how nature has discovered new catalytic functions and how such evolutionary progressions have been recapitulated in the laboratory starting from extant enzymes. We then examine non-native enzyme activities that have been discovered and exploited for chemical synthesis, emphasizing reactions that do not have natural counterparts. The new functions have mechanistic parallels to the native reaction mechanisms that often manifest as catalytic promiscuity and the ability to convert from one function to the other with minimal mutation. We present examples of how non-natural activities have been improved by directed evolution, mimicking the process used by nature to create new catalysts. Examples of new enzyme functions include epoxide opening reactions with non-natural nucleophiles catalyzed by a laboratory-evolved halohydrin dehalogenase, cyclopropanation and other carbene transfer reactions catalyzed by cytochrome P450 variants, and non-natural modes of cyclization by a modified terpene synthase. Lastly, we describe discoveries of non-native catalytic functions that may provide future opportunities for expanding the enzyme universe. PMID:25649694

Comparing Two Definitions of Work for a Biological Quantum Heat Engine

International Nuclear Information System (INIS)

Xu You-Yang; Zhao Shun-Cai; Liu Juan

2015-01-01

Systems of photosynthetic reaction centres have been modelled as heat engines, while it has also been reported that the efficiency and power of such heat engines can be enhanced by quantum interference — a trait that has attracted much interest. We compare two definitions of the work of such a photosynthetic heat engine, i.e. definition A used by Weimer et al. and B by Dorfman et al. We also introduce a coherent interaction between donor and acceptor (CIDA) to demonstrate a reversible energy transport. We show that these two definitions of work can impart contradictory results, that is, CIDA enhances the power and efficiency of the photosynthetic heat engine with definition B but not with A. Additionally, we find that both reversible and irreversible excitation-energy transport can be described with definition A, but definition B can only model irreversible transport. As a result, we conclude that definition A is more suitable for photosynthetic systems than definition B. (paper)

Reaction progress pathways for glass and spent fuel under unsaturated conditions

International Nuclear Information System (INIS)

Bates, J.; Finn, P.; Bourcier, W.; Stout, R.

1994-10-01

The source term for the release of radionuclides from a nuclear waste repository is the waste form. In order to assess the performance of the repository and the engineered barrier system (EBS) compared to regulations established by the Nuclear Regulatory Commission and the Environmental Protection Agency it is necessary (1) to use available data to place bounding limits on release rates from the EBS, and (2) to develop a mechanistic predictive model of the radionuclide release and validate the model against tests done under a variety of different potential reaction conditions. The problem with (1) is that there is little experience to use when evaluating waste form reaction under unsaturated conditions such that errors in applying expert judgment to the problem may be significant. The second approach, to test and model the waste form reaction, is a more defensible means of providing input to the prediction of radionuclide release. In this approach, information related to the source term has a technical basis and provides a starting point to make reasonable assumptions for long-term behavior. Key aspects of this approach are an understanding of the reaction progress mechanism and the ability to model the tests using a geochemical code such as EQ3/6. Current knowledge of glass, UO 2 , and spent fuel reactions under different conditions are described below

Nonmonotonic Temperature Dependence of the Pressure-Dependent Reaction Rate Constant and Kinetic Isotope Effect of Hydrogen Radical Reaction with Benzene Calculated by Variational Transition-State Theory.

Science.gov (United States)

Zhang, Hui; Zhang, Xin; Truhlar, Donald G; Xu, Xuefei

2017-11-30

The reaction between H and benzene is a prototype for reactions of radicals with aromatic hydrocarbons. Here we report calculations of the reaction rate constants and the branching ratios of the two channels of the reaction (H addition and H abstraction) over a wide temperature and pressure range. Our calculations, obtained with an accurate potential energy surface, are based on variational transition-state theory for the high-pressure limit of the addition reaction and for the abstraction reaction and on system-specific quantum Rice-Ramsperger-Kassel theory calibrated by variational transition-state theory for pressure effects on the addition reaction. The latter is a very convenient way to include variational effects, corner-cutting tunneling, and anharmonicity in falloff calculations. Our results are in very good agreement with the limited experimental data and show the importance of including pressure effects in the temperature interval where the mechanism changes from addition to abstraction. We found a negative temperature effect of the total reaction rate constants at 1 atm pressure in the temperature region where experimental data are missing and accurate theoretical data were previously missing as well. We also calculated the H + C 6 H 6 /C 6 D 6 and D + C 6 H 6 /C 6 D 6 kinetic isotope effects, and we compared our H + C 6 H 6 results to previous theoretical data for H + toluene. We report a very novel nonmonotonic dependence of the kinetic isotope effect on temperature. A particularly striking effect is the prediction of a negative temperature dependence of the total rate constant over 300-500 K wide temperature ranges, depending on the pressure but generally in the range from 600 to 1700 K, which includes the temperature range of ignition in gasoline engines, which is important because aromatics are important components of common fuels.

Redox cofactor engineering in industrial microorganisms: strategies, recent applications and future directions.

Science.gov (United States)

Liu, Jiaheng; Li, Huiling; Zhao, Guangrong; Caiyin, Qinggele; Qiao, Jianjun

2018-05-01

NAD and NADP, a pivotal class of cofactors, which function as essential electron donors or acceptors in all biological organisms, drive considerable catabolic and anabolic reactions. Furthermore, they play critical roles in maintaining intracellular redox homeostasis. However, many metabolic engineering efforts in industrial microorganisms towards modification or introduction of metabolic pathways, especially those involving consumption, generation or transformation of NAD/NADP, often induce fluctuations in redox state, which dramatically impede cellular metabolism, resulting in decreased growth performance and biosynthetic capacity. Here, we comprehensively review the cofactor engineering strategies for solving the problematic redox imbalance in metabolism modification, as well as their features, suitabilities and recent applications. Some representative examples of in vitro biocatalysis are also described. In addition, we briefly discuss how tools and methods from the field of synthetic biology can be applied for cofactor engineering. Finally, future directions and challenges for development of cofactor redox engineering are presented.

Reaction time for trimolecular reactions in compartment-based reaction-diffusion models

Science.gov (United States)

Li, Fei; Chen, Minghan; Erban, Radek; Cao, Yang

2018-05-01

Trimolecular reaction models are investigated in the compartment-based (lattice-based) framework for stochastic reaction-diffusion modeling. The formulae for the first collision time and the mean reaction time are derived for the case where three molecules are present in the solution under periodic boundary conditions. For the case of reflecting boundary conditions, similar formulae are obtained using a computer-assisted approach. The accuracy of these formulae is further verified through comparison with numerical results. The presented derivation is based on the first passage time analysis of Montroll [J. Math. Phys. 10, 753 (1969)]. Montroll's results for two-dimensional lattice-based random walks are adapted and applied to compartment-based models of trimolecular reactions, which are studied in one-dimensional or pseudo one-dimensional domains.

Numerical Study of the Performance and Emission of a Diesel-Syngas Dual Fuel Engine

Directory of Open Access Journals (Sweden)

Shiquan Feng

2017-01-01

Full Text Available Based on the theory of direct relation graph (DRG and the sensitivity analysis, a reduced mechanism for the diesel-syngas dual fuel was constructed. Three small thresholds were applied in the process of the detailed mechanism simplification by DRG, and a skeletal mechanism with 185 elements and the 832 elementary reactions was obtained. According to the framework of the skeletal mechanism, the time-consuming approach of sensitivity analysis was employed for further simplification, and the skeletal mechanism was further reduced to the size of 158 elements and 705 reactions. The Chemkin software with the detailed mechanism was utilized to calculate the effect of syngas addition on the combustion characteristics of diesel combustion. The findings showed that the addition of syngas could reduce the ignition delay time and increase the laminar flame speed. Based on the reduced mechanism and engine parameters, a 3D model of the engine was constructed with the Forte code. The 3D model was adopted to study the effect of syngas addition on the performance and exhaust emissions of the engine and the relevant data of the experiment was used in the calibration of the 3D model.

Reaction Mechanisms and HCCI Combustion Processes of Mixtures of n-Heptane and the Butanols

Directory of Open Access Journals (Sweden)

Hu eWang

2015-03-01

Full Text Available A reduced primary reference fuel (PRF-Alcohol-Di-tert-butyl Peroxide (DTBP mechanism with 108 species and 435 reactions, including sub-mechanisms of PRF, methanol, ethanol, DTBP and the four butanol isomers, is proposed for homogeneous charge compression ignition (HCCI engine combustion simulations of butanol isomers/n-heptane mixtures. HCCI experiments fuelled with butanol isomer/n-heptane mixtures on two different engines are conducted for the validation of proposed mechanism. The mechanism has been validated against shock tube ignition delays, laminar flame speeds, species profiles in premixed flames and engine HCCI combustion data, and good agreements with experimental results are demonstrated under various validation conditions. It is found that although the reactivity of neat tert-butanol is the lowest, mixtures of tert-butanol/n-heptane exhibit the highest reactivity among the butanol isomer/n-heptane mixtures if the n-heptane blending ratio exceeds 20% (mole. Kinetic analysis shows that the highest C-H bond energy in the tert-butanol molecule is partially responsible for this phenomenon. It is also found that the reaction tC4H9OH+CH3O2 =tC4H9O+CH3O2H plays important role and eventually produces the OH radical to promote the ignition and combustion. The proposed mechanism is able to capture HCCI combustion processes of the butanol/n-heptane mixtures under different operating conditions. In addition, the trend that tert-butanol /n-heptane has the highest reactivity is also captured in HCCI combustion simulations. The results indicate that the current mechanism can be used for HCCI engine predictions of PRF and alcohol fuels.

A numerical study on RCCI engine fueled by biodiesel/methanol

International Nuclear Information System (INIS)

Zhou, D.Z.; Yang, W.M.; An, H.; Li, J.; Shu, C.

2015-01-01

Highlights: • Numerical study is done to investigate RCCI engine fueled by biodiesel/methanol. • A new biodiesel/methanol dual-fuel chemical reaction mechanism is developed. • Engine performance is improved with fuel reactivity stratification formed. • Soot and NO x significant reduce with methanol induction and fuel reactivity stratification. - Abstract: A 3-D numerical simulation platform based on the KIVA4-CHEMKIN code was constructed by incorporating a newly developed skeletal chemical kinetics mechanism to study the reactivity controlled compression ignition (RCCI) engine performance, combustion and emission characteristics. In the present study, methanol is assumed to be induced into the engine through the intake port, while biodiesel is directly injected into the engine by the end of the compression stroke. The skeletal biodiesel and methanol dual fuel chemical reaction mechanism coupled with CO, NO x and soot formation mechanisms was developed and validated by comparing the ignition delay predicted by the developed mechanism with that of the detailed biodiesel and methanol mechanisms, and also by comparing the simulation results of KIVA-CHEMKIN with the experimental results under different engine operating conditions. A good agreement has been achieved in terms of ignition delay, in-cylinder pressure and heat release rate (HRR). The methanol mass fraction was varied from 0% to 80% at an interval of 20% to form different reactivity stratification. Simulation results revealed that under 10% load conditions, the increasing methanol reduced the peak pressure and heat release rate, whereas under 50% and 100% loads, the peak pressure both appeared at 60% methanol induction. Also, the reactivity distribution and ringing intensity were discussed, aiming at investigating the fuel gradient effects and knocking level, respectively. For the emissions, a general decreasing trend on CO emission was observed at both 50% and 100% loads while at 10% load, a slight

Terminal alkenes as versatile chemical reporter groups for metabolic oligosaccharide engineering.

Science.gov (United States)

Späte, Anne-Katrin; Schart, Verena F; Schöllkopf, Sophie; Niederwieser, Andrea; Wittmann, Valentin

2014-12-08

The Diels-Alder reaction with inverse electron demand (DAinv reaction) of 1,2,4,5-tetrazines with electron rich or strained alkenes was proven to be a bioorthogonal ligation reaction that proceeds fast and with high yields. An important application of the DAinv reaction is metabolic oligosaccharide engineering (MOE) which allows the visualization of glycoconjugates in living cells. In this approach, a sugar derivative bearing a chemical reporter group is metabolically incorporated into cellular glycoconjugates and subsequently derivatized with a probe by means of a bioorthogonal ligation reaction. Here, we investigated a series of new mannosamine and glucosamine derivatives with carbamate-linked side chains of varying length terminated by alkene groups and their suitability for labeling cell-surface glycans. Kinetic investigations showed that the reactivity of the alkenes in DAinv reactions increases with growing chain length. When applied to MOE, one of the compounds, peracetylated N-butenyloxycarbonylmannosamine, was especially well suited for labeling cell-surface glycans. Obviously, the length of its side chain represents the optimal balance between incorporation efficiency and speed of the labeling reaction. Sialidase treatment of the cells before the bioorthogonal labeling reaction showed that this sugar derivative is attached to the glycans in form of the corresponding sialic acid derivative and not epimerized to another hexosamine derivative to a considerable extent. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Thin liquid films with time-dependent chemical reactions sheared by an ambient gas flow

Science.gov (United States)

Bender, Achim; Stephan, Peter; Gambaryan-Roisman, Tatiana

2017-08-01

Chemical reactions in thin liquid films are found in many industrial applications, e.g., in combustion chambers of internal combustion engines where a fuel film can develop on pistons or cylinder walls. The reactions within the film and the turbulent outer gas flow influence film stability and lead to film breakup, which in turn can lead to deposit formation. In this work we examine the evolution and stability of a thin liquid film in the presence of a first-order chemical reaction and under the influence of a turbulent gas flow. Long-wave theory with a double perturbation analysis is used to reduce the complexity of the problem and obtain an evolution equation for the film thickness. The chemical reaction is assumed to be slow compared to film evolution and the amount of reactant in the film is limited, which means that the reaction rate decreases with time as the reactant is consumed. A linear stability analysis is performed to identify the influence of reaction parameters, material properties, and environmental conditions on the film stability limits. Results indicate that exothermic reactions have a stabilizing effect whereas endothermic reactions destabilize the film and can lead to rupture. It is shown that an initially unstable film can become stable with time as the reaction rate decreases. The shearing of the film by the external gas flow leads to the appearance of traveling waves. The shear stress magnitude has a nonmonotonic influence on film stability.

A Unique Civil Engineering Capstone Design Course

Directory of Open Access Journals (Sweden)

G Padmanabhan

2018-02-01

Full Text Available The North Dakota State University, USA, capstone course was developed as a unique model in response to the effort of the Accreditation Board of Engineering and Technology, USA, to streamline and improve design instruction in the curriculum and has steadily evolved to keep pace with the ever-changing technology and the expectations of the profession and the society we serve. A capstone design course by definition should be a design experience for students in the final year before graduation integrating all major design concepts they have learned up until then in the program. Carefully chosen real world projects with design content in all sub-disciplines of civil engineering are assigned in this team-taught course. Faculty and practicing professionals make presentations on design process; project management; leadership in an engineering environment; and public policy; global perspectives in engineering; and professional career and licensure. Practicing professionals also critique the final student presentations. Students work in teams with number of faculty serving as technical consultants, and a faculty mentor for each team to provide non-technical guidance and direction. The course requires students to demonstrate mastery of the curriculum and to work with others in a team environment. Course assessment includes evaluation of the final design, presentations, written technical reports, project design schedule, a project design journal, and reaction papers.

Significant Improvement of Catalytic Efficiencies in Ionic Liquids

International Nuclear Information System (INIS)

Song, Choong Eui; Yoon, Mi Young; Choi, Doo Seong

2005-01-01

The use of ionic liquids as reaction media can confer many advantages upon catalytic reactions over reactions in organic solvents. In ionic liquids, catalysts having polar or ionic character can easily be immobilized without additional structural modification and thus the ionic solutions containing the catalyst can easily be separated from the reagents and reaction products, and then, be reused. More interestingly, switching from an organic solvent to an ionic liquid often results in a significant improvement in catalytic performance (e.g., rate acceleration, (enantio)selectivity improvement and an increase in catalyst stability). In this review, some recent interesting results which can nicely demonstrate these positive 'ionic liquid effect' on catalysis are discussed

Investigation of Spark Ignition and Autoignition in Methane and Air Using Computational Fluid Dynamics and Chemical Reaction Kinetics. A numerical Study of Ignition Processes in Internal Combustion Engines

Energy Technology Data Exchange (ETDEWEB)

Nordrik, R.

1993-12-01

The processes in the combustion chamber of internal combustion engines have received increased attention in recent years because their efficiencies are important both economically and environmentally. This doctoral thesis studies the ignition phenomena by means of numerical simulation methods. The fundamental physical relations include flow field conservation equations, thermodynamics, chemical reaction kinetics, transport properties and spark modelling. Special attention is given to the inclusion of chemical kinetics in the flow field equations. Using his No Transport of Radicals Concept method, the author reduces the computational efforts by neglecting the transport of selected intermediate species. The method is validated by comparison with flame propagation data. A computational method is described and used to simulate spark ignition in laminar premixed methane-air mixtures and the autoignition process of a methane bubble surrounded by hot air. The spark ignition simulation agrees well with experimental results from the literature. The autoignition simulation identifies the importance of diffusive and chemical processes acting together. The ignition delay times exceed the experimental values found in the literature for premixed ignition delay, presumably because of the mixing process and lack of information on low temperature reactions in the skeletal kinetic mechanism. Transient turbulent methane jet autoignition is simulated by means of the KIVA-II code. Turbulent combustion is modelled by the Eddy Dissipation Concept. 90 refs., 81 figs., 3 tabs.

Cobalt-Embedded Nitrogen-Rich Carbon Nanotubes Efficiently Catalyze Hydrogen Evolution Reaction at All pH Values

Czech Academy of Sciences Publication Activity Database

Zou, X.; Huang, X.; Goswami, A.; Silva, R.; Sathe, B. R.; Mikmeková, Eliška; Asefa, T.

2014-01-01

Roč. 53, č. 17 (2014), s. 4372-4376 ISSN 1433-7851 R&D Projects: GA MŠk(CZ) LO1212 Institutional support: RVO:68081731 Keywords : carbon nanotubes * cobalt nanoparticles * electrocatalysis * hydrogen evolution reaction * water splitting Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 11.261, year: 2014

Future engineers: the intrinsic technology motivation of secondary school pupils

Science.gov (United States)

Jones, Lewis C. R.; McDermott, Hilary J.; Tyrer, John R.; Zanker, Nigel P.

2018-07-01

The supply of students motivated to study engineering in higher education is critical to the sector. Results are presented from the 'Mindsets STEM Enhancement Project'. Fifty-seven new resources packs, designed to improve STEM education in Design and Technology, were given to schools across London. A modified Intrinsic Motivation Inventory questionnaire measured pupils' (n = 458) motivation towards technology. The results show that although pupils have positive reactions to the technology content within Design and Technology lessons, the type of STEM resources and lessons created through the project had made no significant difference on pupils' interest/enjoyment towards technology. This suggests stand-alone resources do not improve pupil motivation. The impact of this work to engineering higher education is that the existing levels and the inability to improve pupil motivation in technology at school could be a factor affecting the pursuit of a technology or engineering related education or career.

International Conference on Software Engineering, Knowledge Engineering and Information Engineering (SEKEIE 2012)

CERN Document Server

Software Engineering and Knowledge Engineering: Theory and Practice

2012-01-01

2012 International Conference on Software Engineering, Knowledge Engineering and Information Engineering (SEKEIE 2012) will be held in Macau, April 1-2, 2012 . This conference will bring researchers and experts from the three areas of Software Engineering, Knowledge Engineering and Information Engineering together to share their latest research results and ideas.   This volume book covered significant recent developments in the Software Engineering, Knowledge Engineering and Information Engineering field, both theoretical and applied. We are glad this conference attracts your attentions, and thank your support to our conference. We will absorb remarkable suggestion, and make our conference more successful and perfect.

A cascade reaction network mimicking the basic functional steps of acquired immune response

Science.gov (United States)

Han, Da; Wu, Cuichen; You, Mingxu; Zhang, Tao; Wan, Shuo; Chen, Tao; Qiu, Liping; Zheng, Zheng; Liang, Hao; Tan, Weihong

2015-01-01

Biological systems use complex ‘information processing cores’ composed of molecular networks to coordinate their external environment and internal states. An example of this is the acquired, or adaptive, immune system (AIS), which is composed of both humoral and cell-mediated components. Here we report the step-by-step construction of a prototype mimic of the AIS which we call Adaptive Immune Response Simulator (AIRS). DNA and enzymes are used as simple artificial analogues of the components of the AIS to create a system which responds to specific molecular stimuli in vitro. We show that this network of reactions can function in a manner which is superficially similar to the most basic responses of the vertebrate acquired immune system, including reaction sequences that mimic both humoral and cellular responses. As such, AIRS provides guidelines for the design and engineering of artificial reaction networks and molecular devices. PMID:26391084

A cascade reaction network mimicking the basic functional steps of adaptive immune response.

Science.gov (United States)

Han, Da; Wu, Cuichen; You, Mingxu; Zhang, Tao; Wan, Shuo; Chen, Tao; Qiu, Liping; Zheng, Zheng; Liang, Hao; Tan, Weihong

2015-10-01

Biological systems use complex 'information-processing cores' composed of molecular networks to coordinate their external environment and internal states. An example of this is the acquired, or adaptive, immune system (AIS), which is composed of both humoral and cell-mediated components. Here we report the step-by-step construction of a prototype mimic of the AIS that we call an adaptive immune response simulator (AIRS). DNA and enzymes are used as simple artificial analogues of the components of the AIS to create a system that responds to specific molecular stimuli in vitro. We show that this network of reactions can function in a manner that is superficially similar to the most basic responses of the vertebrate AIS, including reaction sequences that mimic both humoral and cellular responses. As such, AIRS provides guidelines for the design and engineering of artificial reaction networks and molecular devices.

In Situ Environmental TEM in Imaging Gas and Liquid Phase Chemical Reactions for Materials Research.

Science.gov (United States)

Wu, Jianbo; Shan, Hao; Chen, Wenlong; Gu, Xin; Tao, Peng; Song, Chengyi; Shang, Wen; Deng, Tao

2016-11-01

Gas and liquid phase chemical reactions cover a broad range of research areas in materials science and engineering, including the synthesis of nanomaterials and application of nanomaterials, for example, in the areas of sensing, energy storage and conversion, catalysis, and bio-related applications. Environmental transmission electron microscopy (ETEM) provides a unique opportunity for monitoring gas and liquid phase reactions because it enables the observation of those reactions at the ultra-high spatial resolution, which is not achievable through other techniques. Here, the fundamental science and technology developments of gas and liquid phase TEM that facilitate the mechanistic study of the gas and liquid phase chemical reactions are discussed. Combined with other characterization tools integrated in TEM, unprecedented material behaviors and reaction mechanisms are observed through the use of the in situ gas and liquid phase TEM. These observations and also the recent applications in this emerging area are described. The current challenges in the imaging process are also discussed, including the imaging speed, imaging resolution, and data management. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Continuous-flow processes for the catalytic partial hydrogenation reaction of alkynes

Directory of Open Access Journals (Sweden)

Carmen Moreno-Marrodan

2017-04-01

Full Text Available The catalytic partial hydrogenation of substituted alkynes to alkenes is a process of high importance in the manufacture of several market chemicals. The present paper shortly reviews the heterogeneous catalytic systems engineered for this reaction under continuous flow and in the liquid phase. The main contributions appeared in the literature from 1997 up to August 2016 are discussed in terms of reactor design. A comparison with batch and industrial processes is provided whenever possible.

Perspectives in metabolic engineering: understanding cellular regulation towards the control of metabolic routes.

Science.gov (United States)

Zadran, Sohila; Levine, Raphael D

2013-01-01

Metabolic engineering seeks to redirect metabolic pathways through the modification of specific biochemical reactions or the introduction of new ones with the use of recombinant technology. Many of the chemicals synthesized via introduction of product-specific enzymes or the reconstruction of entire metabolic pathways into engineered hosts that can sustain production and can synthesize high yields of the desired product as yields of natural product-derived compounds are frequently low, and chemical processes can be both energy and material expensive; current endeavors have focused on using biologically derived processes as alternatives to chemical synthesis. Such economically favorable manufacturing processes pursue goals related to sustainable development and "green chemistry". Metabolic engineering is a multidisciplinary approach, involving chemical engineering, molecular biology, biochemistry, and analytical chemistry. Recent advances in molecular biology, genome-scale models, theoretical understanding, and kinetic modeling has increased interest in using metabolic engineering to redirect metabolic fluxes for industrial and therapeutic purposes. The use of metabolic engineering has increased the productivity of industrially pertinent small molecules, alcohol-based biofuels, and biodiesel. Here, we highlight developments in the practical and theoretical strategies and technologies available for the metabolic engineering of simple systems and address current limitations.

Atomic nuclei and nuclear reactions. Theory and application

International Nuclear Information System (INIS)

Sitenko, A.G.; Tartakovsky, V.K.; Kenjebaev, K.K.; Shunkeyev, K.Sh.; Ismatov, E.I.; Mukhammedov, S.; Comsan, M.N.H.; Djuraev, Sh.Kh.

2004-01-01

Full text: The short description of the book preparation by the collective authors from Ukraine, Kazakhstan, Uzbekistan and Egypt is given. The present book is the expanded course of lectures on the theory of nuclei, nuclear reactions and their applications delivered by the authors for a number of years in the Ukrainian National University, Aktubinsk State University of the Kazakhstan Republic, Tashkent National University, Samarkand and Termez State Universities of Uzbekistan Republic, Egyptian National Universities (Al-Az'har, Menoufeya, Suez-Canal and Tanta) and the Institute of Nuclear Physics of the Academy of Sciences of the Republic of Uzbekistan. The lectures present foundations of the modern concepts of the structure of nuclei, on the nature of nuclear processes and nuclear transformations. Main attention in the book was paid to the presentation of the basics and some modern achievements in the field of the theory of nuclei and nuclear reactions. A number of problems was investigated in original works and were not presented in the physics textbooks. The book presents the non-relativistic theory of nuclear reactions, questions of relativistic nuclear physics were not considered here. Non-relativistic theory of nuclear reactions is based on the notions of collision matrix or S-matrix. In absence of consequent microscopic theory, the scattering matrix can be found phenomenological based on definite assumptions on the character of nuclear interactions. Modern applications of nuclear reactions for the development of nuclear methods of analysis are presented. The delayed and nuclear techniques with nuclear reactor, accelerators and radioisotopic sources are considered. The book is designed as a textbook for bachelor and postgraduate students of physical faculties of universities and engineering-physical institutions, lecturers and researchers, working in the field of nuclear physics. The book gives an up-to-date list of references on nuclear reaction theory and

Rational design of competitive electrocatalysts for the oxygen reduction reaction in hydrogen fuel cells

Science.gov (United States)

Stolbov, Sergey; Alcántara Ortigoza, Marisol

2012-02-01

The large-scale application of one of the most promising clean and renewable sources of energy, hydrogen fuel cells, still awaits efficient and cost-effective electrocatalysts for the oxygen reduction reaction (ORR) occurring on the cathode. We demonstrate that truly rational design renders electrocatalysts possessing both qualities. By unifying the knowledge on surface morphology, composition, electronic structure and reactivity, we solve that sandwich-like structures are an excellent choice for optimization. Their constituting species couple synergistically yielding reaction-environment stability, cost-effectiveness and tunable reactivity. This cooperative-action concept enabled us to predict two advantageous ORR electrocatalysts. Density functional theory calculations of the reaction free-energy diagrams confirm that these materials are more active toward ORR than the so far best Pt-based catalysts. Our designing concept advances also a general approach for engineering materials in heterogeneous catalysis.

From Protein Engineering to Immobilization: Promising Strategies for the Upgrade of Industrial Enzymes

Science.gov (United States)

Singh, Raushan Kumar; Tiwari, Manish Kumar; Singh, Ranjitha; Lee, Jung-Kul

2013-01-01

Enzymes found in nature have been exploited in industry due to their inherent catalytic properties in complex chemical processes under mild experimental and environmental conditions. The desired industrial goal is often difficult to achieve using the native form of the enzyme. Recent developments in protein engineering have revolutionized the development of commercially available enzymes into better industrial catalysts. Protein engineering aims at modifying the sequence of a protein, and hence its structure, to create enzymes with improved functional properties such as stability, specific activity, inhibition by reaction products, and selectivity towards non-natural substrates. Soluble enzymes are often immobilized onto solid insoluble supports to be reused in continuous processes and to facilitate the economical recovery of the enzyme after the reaction without any significant loss to its biochemical properties. Immobilization confers considerable stability towards temperature variations and organic solvents. Multipoint and multisubunit covalent attachments of enzymes on appropriately functionalized supports via linkers provide rigidity to the immobilized enzyme structure, ultimately resulting in improved enzyme stability. Protein engineering and immobilization techniques are sequential and compatible approaches for the improvement of enzyme properties. The present review highlights and summarizes various studies that have aimed to improve the biochemical properties of industrially significant enzymes. PMID:23306150

From protein engineering to immobilization: promising strategies for the upgrade of industrial enzymes.

Science.gov (United States)

Singh, Raushan Kumar; Tiwari, Manish Kumar; Singh, Ranjitha; Lee, Jung-Kul

2013-01-10

Enzymes found in nature have been exploited in industry due to their inherent catalytic properties in complex chemical processes under mild experimental and environmental conditions. The desired industrial goal is often difficult to achieve using the native form of the enzyme. Recent developments in protein engineering have revolutionized the development of commercially available enzymes into better industrial catalysts. Protein engineering aims at modifying the sequence of a protein, and hence its structure, to create enzymes with improved functional properties such as stability, specific activity, inhibition by reaction products, and selectivity towards non-natural substrates. Soluble enzymes are often immobilized onto solid insoluble supports to be reused in continuous processes and to facilitate the economical recovery of the enzyme after the reaction without any significant loss to its biochemical properties. Immobilization confers considerable stability towards temperature variations and organic solvents. Multipoint and multisubunit covalent attachments of enzymes on appropriately functionalized supports via linkers provide rigidity to the immobilized enzyme structure, ultimately resulting in improved enzyme stability. Protein engineering and immobilization techniques are sequential and compatible approaches for the improvement of enzyme properties. The present review highlights and summarizes various studies that have aimed to improve the biochemical properties of industrially significant enzymes.

Dual-Fuel Combustion for Future Clean and Efficient Compression Ignition Engines

Directory of Open Access Journals (Sweden)

Jesús Benajes

2016-12-01

Full Text Available Stringent emissions limits introduced for internal combustion engines impose a major challenge for the research community. The technological solution adopted by the manufactures of diesel engines to meet the NOx and particle matter values imposed in the EURO VI regulation relies on using selective catalytic reduction and particulate filter systems, which increases the complexity and cost of the engine. Alternatively, several new combustion modes aimed at avoiding the formation of these two pollutants by promoting low temperature combustion reactions, are the focus of study nowadays. Among these new concepts, the dual-fuel combustion mode known as reactivity controlled compression ignition (RCCI seems more promising because it allows better control of the combustion process by means of modulating the fuel reactivity depending on the engine operating conditions. The present experimental work explores the potential of different strategies for reducing the energy losses with RCCI in a single-cylinder research engine, with the final goal of providing the guidelines to define an efficient dual-fuel combustion system. The results demonstrate that the engine settings combination, piston geometry modification, and fuel properties variation are good methods to increase the RCCI efficiency while maintaining ultra-low NOx and soot emissions for a wide range of operating conditions.

A Gradient Taguchi Method for Engineering Optimization

Science.gov (United States)

Hwang, Shun-Fa; Wu, Jen-Chih; He, Rong-Song

2017-10-01

To balance the robustness and the convergence speed of optimization, a novel hybrid algorithm consisting of Taguchi method and the steepest descent method is proposed in this work. Taguchi method using orthogonal arrays could quickly find the optimum combination of the levels of various factors, even when the number of level and/or factor is quite large. This algorithm is applied to the inverse determination of elastic constants of three composite plates by combining numerical method and vibration testing. For these problems, the proposed algorithm could find better elastic constants in less computation cost. Therefore, the proposed algorithm has nice robustness and fast convergence speed as compared to some hybrid genetic algorithms.

The Influence of Fuel Sulfur on the Operation of Large Two-Stroke Marine Diesel Engines

DEFF Research Database (Denmark)

Cordtz, Rasmus Faurskov

The present work focusses on SO3/H2SO4 formation and sulfuric acid (H2SO4) condensation in a large low speed 2-stroke marine diesel engine. SO3 formation is treated theoretically from a formulated multizone engine model described in this work that includes a detailed and validated sulfur reaction...... mechanism. Model results show that for a large marine engine generally about 3 % - 6 % of the fuel sulfur converts to SO3 while the remainder leaves the engine as SO2 from which the SO3 is formed during the expansion stroke. SO3 formation scales with the cylinder pressure and inversely with the engine speed...... as also demonstrated by a number of SO3 experiments described in this work. The experiments are carried out with a heavy duty medium speed 4 stroke diesel engine operating on heavy fuel oil including ≈ 2 wt. % sulfur. SO3 was measured successfully in the exhaust gas with the PENTOL SO3 analyzer...

Effect of Chemical Reactions on the Hydrologic Properties of Fractured and Rubbelized Glass Media

International Nuclear Information System (INIS)

Saripalli, Prasad; Meyer, P D.; Parker, Kent E.; Lindberg, Michael J.

2005-01-01

Understanding the effect of chemical reactions on the hydrologic properties of geological media, such as porosity, permeability and dispersivity, is critical to many natural and engineered sub-surface systems. Influence of glass corrosion (precipitation and dissolution) reactions on fractured and rubbelized (crushed) forms HAN28 and LAWBP1, two candidate waste glass forms for a proposed immobilized low-activity waste (ILAW) disposal facility at the Hanford, WA site, was investigated. Flow and tracer transport experiments were conducted using fractured and rubbelized forms, before and after subjecting them to corrosion using Vapor Hydration Testing (VHT) at 200 C temperature and 200 psig pressure, causing the precipitation of alteration products. Data were analyzed using analytical expressions and CXTFIT, a transport parameter optimization code, for the estimation of the hydrologic characteristics before and after VHT. It was found that glass reactions significantly influence the hydrologic properties of ILAW glass media. Hydrologic properties of rubbelized glass decreased due to precipitation reactions, whereas those of fractured glass media increased due to reaction which led to unconfined expansion of fracture aperture. The results are unique and useful to better understand the effect of chemical reactions on the hydrologic properties of fractured and rubbelized stony media in general and glass media in particular

In situ synchrotron powder diffraction study of the setting reaction kinetics of magnesium-potassium phosphate cements

Czech Academy of Sciences Publication Activity Database

Viani, Alberto; Pérez-Estébanez, Marta; Pollastri, S.; Gualtieri, A. F.

2016-01-01

Roč. 79, January (2016), s. 344-352 ISSN 0008-8846 R&D Projects: GA MŠk(CZ) LO1219 Keywords : kinetics * reaction * X-ray diffraction * MgO * chemically bonded ceramics Subject RIV: JN - Civil Engineering Impact factor: 4.762, year: 2016 http://www.sciencedirect.com/science/article/pii/S0008884615002690

Engineering Encounters: Engineering Adaptations

Science.gov (United States)

Gatling, Anne; Vaughn, Meredith Houle

2015-01-01

Engineering is not a subject that has historically been taught in elementary schools, but with the emphasis on engineering in the "Next Generation Science Standards," curricula are being developed to explicitly teach engineering content and design. However, many of the scientific investigations already conducted with students have…

Microphysics in the Gamma-Ray Burst Central Engine

Energy Technology Data Exchange (ETDEWEB)

Janiuk, Agnieszka, E-mail: agnes@cft.edu.pl [Center for Theoretical Physics, Polish Academy of Sciences, Al. Lotnikow 32/46, 02-668 Warsaw (Poland)

2017-03-01

We calculate the structure and evolution of a gamma-ray burst central engine where an accreting torus has formed around the newly born black hole. We study the general relativistic, MHD models and we self-consistently incorporate the nuclear equation of state. The latter accounts for the degeneracy of relativistic electrons, protons, and neutrons, and is used in the dynamical simulation, instead of a standard polytropic γ -law. The EOS provides the conditions for the nuclear pressure in the function of density and temperature, which evolve with time according to the conservative MHD scheme. We analyze the structure of the torus and outflowing winds, and compute the neutrino flux emitted through the nuclear reaction balance in the dense and hot matter. We also estimate the rate of transfer of the black-hole rotational energy to the bipolar jets. Finally, we elaborate on the nucleosynthesis of heavy elements in the accretion flow and the wind, through computations of the thermonuclear reaction network. We discuss the possible signatures of the radioactive element decay in the accretion flow. We suggest that further detailed modeling of the accretion flow in the GRB engine, together with its microphysics, may be a valuable tool to constrain the black-hole mass and spin. It can be complementary to the gravitational wave analysis if the waves are detected with an electromagnetic counterpart.

Numerical investigations of hybrid rocket engines

Science.gov (United States)

Betelin, V. B.; Kushnirenko, A. G.; Smirnov, N. N.; Nikitin, V. F.; Tyurenkova, V. V.; Stamov, L. I.

2018-03-01

Paper presents the results of numerical studies of hybrid rocket engines operating cycle including unsteady-state transition stage. A mathematical model is developed accounting for the peculiarities of diffusion combustion of fuel in the flow of oxidant, which is composed of oxygen-nitrogen mixture. Three dimensional unsteady-state simulations of chemically reacting gas mixture above thermochemically destructing surface are performed. The results show that the diffusion combustion brings to strongly non-uniform fuel mass regression rate in the flow direction. Diffusive deceleration of chemical reaction brings to the decrease of fuel regression rate in the longitudinal direction.

Enabling tools for high-throughput detection of metabolites: Metabolic engineering and directed evolution applications.

Science.gov (United States)

Lin, Jyun-Liang; Wagner, James M; Alper, Hal S

2017-12-01

Within the Design-Build-Test Cycle for strain engineering, rapid product detection and selection strategies remain challenging and limit overall throughput. Here we summarize a wide variety of modalities that transduce chemical concentrations into easily measured absorbance, luminescence, and fluorescence signals. Specifically, we cover protein-based biosensors (including transcription factors), nucleic acid-based biosensors, coupled enzyme reactions, bioorthogonal chemistry, and fluorescent and chromogenic dyes and substrates as modalities for detection. We focus on the use of these methods for strain engineering and enzyme discovery and conclude with remarks on the current and future state of biosensor development for application in the metabolic engineering field. Copyright © 2017 Elsevier Inc. All rights reserved.

40 CFR 90.116 - Certification procedure-determining engine displacement, engine class, and engine families.

Science.gov (United States)

2010-07-01

... engine displacement, engine class, and engine families. 90.116 Section 90.116 Protection of Environment...-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Emission Standards and Certification Provisions § 90.116 Certification procedure—determining engine displacement, engine class, and engine families. (a) Engine...

Reaction Decoder Tool (RDT): extracting features from chemical reactions.

Science.gov (United States)

Rahman, Syed Asad; Torrance, Gilliean; Baldacci, Lorenzo; Martínez Cuesta, Sergio; Fenninger, Franz; Gopal, Nimish; Choudhary, Saket; May, John W; Holliday, Gemma L; Steinbeck, Christoph; Thornton, Janet M

2016-07-01

Extracting chemical features like Atom-Atom Mapping (AAM), Bond Changes (BCs) and Reaction Centres from biochemical reactions helps us understand the chemical composition of enzymatic reactions. Reaction Decoder is a robust command line tool, which performs this task with high accuracy. It supports standard chemical input/output exchange formats i.e. RXN/SMILES, computes AAM, highlights BCs and creates images of the mapped reaction. This aids in the analysis of metabolic pathways and the ability to perform comparative studies of chemical reactions based on these features. This software is implemented in Java, supported on Windows, Linux and Mac OSX, and freely available at https://github.com/asad/ReactionDecoder : asad@ebi.ac.uk or s9asad@gmail.com. © The Author 2016. Published by Oxford University Press.

In silico strain optimization by adding reactions to metabolic models.

Science.gov (United States)

Correia, Sara; Rocha, Miguel

2012-07-24

Nowadays, the concerns about the environment and the needs to increase the productivity at low costs, demand for the search of new ways to produce compounds with industrial interest. Based on the increasing knowledge of biological processes, through genome sequencing projects, and high-throughput experimental techniques as well as the available computational tools, the use of microorganisms has been considered as an approach to produce desirable compounds. However, this usually requires to manipulate these organisms by genetic engineering and/ or changing the enviromental conditions to make the production of these compounds possible. In many cases, it is necessary to enrich the genetic material of those microbes with hereologous pathways from other species and consequently adding the potential to produce novel compounds. This paper introduces a new plug-in for the OptFlux Metabolic Engineering platform, aimed at finding suitable sets of reactions to add to the genomes of selected microbes (wild type strain), as well as finding complementary sets of deletions, so that the mutant becomes able to overproduce compounds with industrial interest, while preserving their viability. The necessity of adding reactions to the metabolic model arises from existing gaps in the original model or motivated by the productions of new compounds by the organism. The optimization methods used are metaheuristics such as Evolutionary Algorithms and Simulated Annealing. The usefulness of this plug-in is demonstrated by a case study, regarding the production of vanillin by the bacterium E. coli.

Introduction to nuclear engineering

International Nuclear Information System (INIS)

Gylys, J.

1997-01-01

The textbook, which is the first book in Lithuanian on this subject generalises information on key aspects of nuclear engineering. Specialists in nuclear power for Ignalina NPP and for the infrastructure of nuclear energy sector of Lithuania are prepared at Kaunas University of Technology. The textbooks the students and lecturers have been using to-date were mostly in other languages than Lithuanian and they have not been adapted for teaching in Lithuania's higher educational establishments. This textbook is useful also to anyone who is interested in the issues and future prospects of nuclear power. It contains the chapters on nuclear reactions, theory of nuclear reactors, nuclear reactors kinetics, neutronic analysis, thermalhydraulic calculations of nuclear reactors operation and description of the construction of Ignalina NPP. (author)

Critical Imperative for the Reform of British Interpretation of Fetal Heart Rate Decelerations: Analysis of FIGO and NICE Guidelines, Post-Truth Foundations, Cognitive Fallacies, Myths and Occam's Razor.

Science.gov (United States)

Sholapurkar, Shashikant L

2017-04-01

Cardiotocography (CTG) has disappointingly failed to show good predictability for fetal acidemia or neonatal outcomes in several large studies. A complete rethink of CTG interpretation will not be out of place. Fetal heart rate (FHR) decelerations are the most common deviations, benign as well as manifestation of impending fetal hypoxemia/acidemia, much more commonly than FHR baseline or variability. Their specific nomenclature is important (center-stage) because it provides the basic concepts and framework on which the complex "pattern recognition" of CTG interpretation by clinicians depends. Unfortunately, the discrimination of FHR decelerations seems to be muddled since the British obstetrics adopted the concept of vast majority of FHR decelerations being "variable" (cord-compression). With proliferation of confusing waveform criteria, "atypical variables" became the commonest cause of suspicious/pathological CTG. However, National Institute for Health and Care Excellence (NICE) (2014) had to disband the "typical" and "atypical" terminology because of flawed classifying criteria. This analytical review makes a strong case that there are major and fundamental framing and confirmation fallacies (not just biases) in interpretation of FHR decelerations by NICE (2014) and International Federation of Gynecology and Obstetrics (FIGO) (2015), probably the biggest in modern medicine. This "post-truth" approach is incompatible with scientific practice. Moreover, it amounts to setting oneself for failure. The inertia to change could be best described as "backfire effect". There is abundant evidence that head-compression (and other non-hypoxic mediators) causes rapid rather than shallow/gradual decelerations. Currently, the vast majority of decelerations are attributed to unproven cord compression underpinned by flawed disproven pathophysiological hypotheses. Their further discrimination based on abstract, random, trial and error criteria remains unresolved suggesting a

Nuclear reactor safety: physics and engineering aspects

International Nuclear Information System (INIS)

Kinchin, G.H.

1982-01-01

In order to carry out the sort of probabilistic analysis referred to by Farmer (Contemp. Phys.; 22:349(1981)), it is necessary to have a good understanding of the processes involved in both normal and accident conditions in a nuclear reactor. Some of these processes, for a variety of different reactor systems, are considered in sections dealing with the neutron chain reaction, the removal of heat from the reactor, material problems, reliability of protective systems and a number of specific topics of particular interest from the point of view of physics or engineering. (author)

Kinetic modelling of hydro-treatment reactions by study of different chemical groups; Modelisation cinetique des reactions d`hydrotraitement par regroupement en familles chimiques

Energy Technology Data Exchange (ETDEWEB)

Bonnardot, J

1998-11-19

Hydro-treatment of petroleum shortcuts permits elimination of unwanted components in order to increase combustion in engine and to decrease atmospheric pollution. Hydro-desulfurization (HDS), Hydro-denitrogenation (HDN) and Hydrogenation of aromatics (HDA) of a LCO (Light Cycle Oil)-Type gas oil have been studied using a new pilot at a fixed temperature with a NiMo/Al{sub 2}O{sub 3} catalyst. A hydrodynamic study showed that reactions occurring in the up-flow fixed bed reactor that has been used during the experiments, were governed exclusively by chemical reaction rates and not by diffusion. Through detailed chemical analysis, height chemical groups have been considered: three aromatics groups, one sulfided group, one nitrogenized and NH{sub 3}, H{sub 2}S, H{sub 2}. Two Langmuir-Hinshelwood-type kinetic models with either one or two types of sites have been established. The model with two types of site - one site of hydrogenation and one site of hydrogenolysis - showed a better fit in the modeling of the experimental results. This model enables to forecast the influence of partial pressure of H{sub 2}S and partial pressure of H{sub 2} on hydro-treatment reactions of a LCO-type gas oil. (author) 119 refs.

Sound engineering for diesel engines; Sound Engineering an Dieselmotoren

Energy Technology Data Exchange (ETDEWEB)

Enderich, A.; Fischer, R. [MAHLE Filtersysteme GmbH, Stuttgart (Germany)

2006-07-01

The strong acceptance for vehicles powered by turbo-charged diesel engines encourages several manufacturers to think about sportive diesel concepts. The approach of suppressing unpleasant noise by the application of distinctive insulation steps is not adequate to satisfy sportive needs. The acoustics cannot follow the engine's performance. This report documents, that it is possible to give diesel-powered vehicles a sportive sound characteristic by using an advanced MAHLE motor-sound-system with a pressure-resistant membrane and an integrated load controlled flap. With this the specific acoustic disadvantages of the diesel engine, like the ''diesel knock'' or a rough engine running can be masked. However, by the application of a motor-sound-system you must not negate the original character of the diesel engine concept, but accentuate its strong torque characteristic in the middle engine speed range. (orig.)

Engineering justice transforming engineering education and practice

CERN Document Server

Leydens, Jon A

2018-01-01

Using social justice as a catalyst for curricular transformation, Engineering Justice presents an examination of how politics, culture, and other social issues are inherent in the practice of engineering. It aims to align engineering curricula with socially just outcomes, increase enrollment among underrepresented groups, and lessen lingering gender, class, and ethnicity gaps by showing how the power of engineering knowledge can be explicitly harnessed to serve the underserved and address social inequalities. This book is meant to transform the way educators think about engineering curricula through creating or transforming existing courses to attract, retain, and motivate engineering students to become professionals who enact engineering for social justice. Engineering Justice offers thought-provoking chapters on: why social justice is inherent yet often invisible in engineering education and practice; engineering design for social justice; social justice in the engineering sciences; social justice in human...

ADVERSE REACTIONS TO VACCINES AND WAYS OF ITS PREVENTION

Directory of Open Access Journals (Sweden)

Yelyseyeva I. V

2011-04-01

Full Text Available The overview concerns allergic reaction on vaccines and possible ways of increasing safety of immunization on basis of use of local specific immunotherapies (SIT experience, particularly the sublingual route. The use of chemically altered allergens, allergoids; alternative routes of administration, particularly the sublingual route; use of novel adjuvants, such as CpG oligonucleotides and mycobacterial vaccines; other approaches, such as allergenic peptides, relevant T-cell epitope peptide immunotherapy; DNA vaccination, recombinant and engineered allergens, chimeric molecules and combined therapy are all approaches that have yielded positive results to increase safety of SIT and improve its efficacy.

Engineering Bacteria to Catabolize the Carbonaceous Component of Sarin: Teaching E. coli to Eat Isopropanol

DEFF Research Database (Denmark)

Brown, Margaret E.; Mukhopadhyay, Aindrila; Keasling, Jay D.

2016-01-01

conversion with a key reaction performed by the acetone carboxylase complex (ACX). We engineered the heterologous expression of the ACX complex from Xanthobacter autotrophicus PY2 to match the naturally occurring subunit stoichiometry and purified the recombinant complex from E. coli for biochemical analysis....... Incorporating this ACX complex and enzymes from diverse organisms, we introduced an isopropanol degradation pathway in E. coli, optimized induction conditions, and decoupled enzyme expression to probe pathway bottlenecks. Our engineered E. coli consumed 65% of isopropanol compared to no-cell controls......We report an engineered strain of Escherichia coli that catabolizes the carbonaceous component of the extremely toxic chemical warfare agent sarin. Enzymatic decomposition of sarin generates isopropanol waste that, with this engineered strain, is then transformed into acetyl-CoA by enzymatic...

Production of carbon nanotubes using mechanical milling in the presence of an exothermic reaction

International Nuclear Information System (INIS)

Karimi, E.Z.; Zebarjad, S.M.; Khaki, J. Vahdati; Izadi, H.

2010-01-01

Carbon nanotubes (CNTs) have shown promising potential for many applications in field of engineering due to their unusual significant properties. A major challenge for the industrial applications of CNTs is the large-quantity production. In this field, one new method for CNT production is annealing the ball milled graphite powder. The annealing process should be done in high temperature (1200-1400 o C) and needs time more than 6 h. The novel process introduced in this paper is elimination the annealing stage thorough a thermite reaction. The necessity heat for the conversion of milling products to CNTs was generated in the milling chamber by an exothermic reaction. In addition, the reaction products acted as catalysts to the CNT formation process. The adiabatic temperatures of 1809, 2000 and 2325 K were selected according to balancing graphite and thermite mixture (Aluminum + Iron oxide powders) for exothermic reaction. The results of thermo gravimetric analysis (TGA) test proved that CNT formation strongly depends on adiabatic temperature. The results of microscopic evaluation done by transition electron microscope (TEM) showed that at higher adiabatic temperature CNTs could be produced.

Coil-On-Plug Ignition for LOX/Methane Liquid Rocket Engines in Thermal Vacuum Environments

Science.gov (United States)

Melcher, John C.; Atwell, Matthew J.; Morehead, Robert L.; Hurlbert, Eric A.; Bugarin, Luz; Chaidez, Mariana

2017-01-01

A coil-on-plug ignition system has been developed and tested for Liquid Oxygen (LOX) / liquid methane rocket engines operating in thermal vacuum conditions. The igniters were developed and tested as part of the Integrated Cryogenic Propulsion Test Article (ICPTA), previously tested as part of the Project Morpheus test vehicle. The ICPTA uses an integrated, pressure-fed, cryogenic LOX/methane propulsion system including a reaction control system (RCS) and a main engine. The ICPTA was tested at NASA Glenn Research Center's Plum Brook Station in the Spacecraft Propulsion Research Facility (B-2) under vacuum and thermal vacuum conditions. In order to successfully demonstrate ignition reliability in the vacuum conditions and eliminate corona discharge issues, a coil-on-plug ignition system has been developed. The ICPTA uses spark-plug ignition for both the main engine igniter and the RCS. The coil-on-plug configuration eliminates the conventional high-voltage spark plug cable by combining the coil and the spark-plug into a single component. Prior to ICPTA testing at Plum Brook, component-level reaction control engine (RCE) and main engine igniter testing was conducted at NASA Johnson Space Center (JSC), which demonstrated successful hot-fire ignition using the coil-on-plug from sea-level ambient conditions down to 10(exp.-2) torr. Integrated vehicle hot-fire testing at JSC demonstrated electrical and command/data system performance. Lastly, Plum Brook testing demonstrated successful ignitions at simulated altitude conditions at 30 torr and cold thermal-vacuum conditions at 6 torr. The test campaign successfully proved that coil-on-plug technology will enable integrated LOX/methane propulsion systems in future spacecraft.

Coil-On-Plug Ignition for Oxygen/Methane Liquid Rocket Engines in Thermal-Vacuum Environments

Science.gov (United States)

Melcher, John C.; Atwell, Matthew J.; Morehead, Robert L.; Hurlbert, Eric A.; Bugarin, Luz; Chaidez, Mariana

2017-01-01

A coil-on-plug ignition system has been developed and tested for Liquid Oxygen (LOX)/liquid methane (LCH4) rocket engines operating in thermal vacuum conditions. The igniters were developed and tested as part of the Integrated Cryogenic Propulsion Test Article (ICPTA), previously tested as part of the Project Morpheus test vehicle. The ICPTA uses an integrated, pressure-fed, cryogenic LOX/LCH4 propulsion system including a reaction control system (RCS) and a main engine. The ICPTA was tested at NASA Glenn Research Center's Plum Brook Station in the Spacecraft Propulsion Research Facility (B-2) under vacuum and thermal vacuum conditions. A coil-on-plug ignition system has been developed to successfully demonstrate ignition reliability at these conditions while preventing corona discharge issues. The ICPTA uses spark plug ignition for both the main engine igniter and the RCS. The coil-on-plug configuration eliminates the conventional high-voltage spark plug cable by combining the coil and the spark plug into a single component. Prior to ICPTA testing at Plum Brook, component-level reaction control engine (RCE) and main engine igniter testing was conducted at NASA Johnson Space Center (JSC), which demonstrated successful hot-fire ignition using the coil-on-plug from sea-level ambient conditions down to 10(exp -2) torr. Integrated vehicle hot-fire testing at JSC demonstrated electrical and command/data system performance. Lastly, hot-fire testing at Plum Brook demonstrated successful ignitions at simulated altitude conditions at 30 torr and cold thermal-vacuum conditions at 6 torr. The test campaign successfully proved that coil-on-plug technology will enable integrated LOX/LCH4 propulsion systems in future spacecraft.

The effect of reformer gas mixture on the performance and emissions of an HSDI diesel engine

OpenAIRE

Christodoulou, Fanos; Megaritis, Athanasios

2014-01-01

This article has been made available through the Brunel Open Access Publishing Fund. Exhaust gas assisted fuel reforming is an attractive on-board hydrogen production method, which can open new frontiers in diesel engines. Apart from hydrogen, and depending on the reactions promoted, the reformate typically contains a significant amount of carbon monoxide, which is produced as a by-product. Moreover, admission of reformed gas into the engine, through the inlet pipe, leads to an increase of...

Mechanical Engineering | Classification | College of Engineering & Applied

Science.gov (United States)

Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on Energy Doctoral Programs in Engineering Non-Degree Candidate Departments Biomedical Engineering Biomedical Engineering Industry Advisory Council Civil & Environmental Engineering Civil &

Biomedical Engineering | Classification | College of Engineering & Applied

Science.gov (United States)

Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on Energy Doctoral Programs in Engineering Non-Degree Candidate Departments Biomedical Engineering Biomedical Engineering Industry Advisory Council Civil & Environmental Engineering Civil &

Electrical Engineering | Classification | College of Engineering & Applied

Science.gov (United States)

Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on Energy Doctoral Programs in Engineering Non-Degree Candidate Departments Biomedical Engineering Biomedical Engineering Industry Advisory Council Civil & Environmental Engineering Civil &

Production of biodiesel by enzymatic transesterification of waste sardine oil and evaluation of its engine performance.

Science.gov (United States)

Arumugam, A; Ponnusami, V

2017-12-01

Waste sardine oil, a byproduct of fish industry, was employed as a low cost feedstock for biodiesel production. It has relatively high free fatty acid (FFA) content (32 mg KOH/g of oil). Lipase enzyme immobilized on activated carbon was used as the catalyst for the transesterification reaction. Process variables viz. reaction temperature, water content and oil to methanol molar ratio were optimized. Optimum methanol to oil molar ratio, water content and temperature were found to be 9:1, 10 v/v% and 30 °C respectively. Reusability of immobilized lipase was studied and it was found after 5 cycles of reuse there was about 13% drop in FAME yield. Engine performance of the produced biodiesel was studied in a Variable Compression Engine and the results confirm that waste sardine oil is a potential alternate and low-cost feedstock for biodiesel production.

Materials Science & Engineering | Classification | College of Engineering &

Science.gov (United States)

Biomedical Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on Energy Doctoral Programs in Engineering Non-Degree Candidate Departments Biomedical Engineering Biomedical Engineering Industry Advisory Council Civil & Environmental Engineering Civil &

A compact skeletal mechanism for n -dodecane with optimized semi-global low-temperature chemistry for diesel engine simulations

Energy Technology Data Exchange (ETDEWEB)

Yao, Tong; Pei, Yuanjiang; Zhong, Bei-Jing; Som, Sibendu; Lu, Tianfeng; Luo, Kai Hong

2017-03-01

A skeletal mechanism with 54 species and 269 reactions was developed to predict pyrolysis and oxidation of n-dodecane as a diesel fuel surrogate involving both high-temperature (high-T) and low-temperature (low-T) conditions. The skeletal mechanism was developed from a semi-detailed mechanism developed at the University of Southern California (USC). Species and reactions for high-T pyrolysis and oxidation of C5-C12 were reduced by using reaction flow analysis (RFA), isomer lumping, and then merged into a skeletal C0-C4 core to form a high-T sub-mechanism. Species and lumped semi-global reactions for low-T chemistry were then added to the high-T sub-mechanism and a 54-species skeletal mechanism is obtained. The rate parameters of the low-T reactions were tuned against a detailed mechanism by the Lawrence Livermore National Laboratory (LLNL), as well as the Spray A flame experimental data, to improve the prediction of ignition delay at low-T conditions, while the high-T chemistry remained unchanged. The skeletal mechanism was validated for auto-ignition, perfectly stirred reactors (PSR), flow reactors and laminar premixed flames over a wide range of flame conditions. The skeletal mechanism was then employed to simulate three-dimensional turbulent spray flames at compression ignition engine conditions and validated against experimental data from the Engine Combustion Network (ECN).

Engineering Encounters: Teaching Educators about Engineering

Science.gov (United States)

Tank, Kristina M.; Raman, D. Raj; Lamm, Monica H.; Sundararajan, Sriram; Estapa, Anne

2017-01-01

This column presents ideas and techniques to enhance science teaching. This month's issue describes preservice elementary teachers learning engineering principles from engineers. Few elementary teachers have experience with implementing engineering into the classroom. While engineering professional development opportunities for inservice teachers…

Development and Implementation of a Transport Method for the Transport and Reaction Simulation Engine (TaRSE) based on the Godunov-Mixed Finite Element Method

Science.gov (United States)

James, Andrew I.; Jawitz, James W.; Munoz-Carpena, Rafael

2009-01-01

A model to simulate transport of materials in surface water and ground water has been developed to numerically approximate solutions to the advection-dispersion equation. This model, known as the Transport and Reaction Simulation Engine (TaRSE), uses an algorithm that incorporates a time-splitting technique where the advective part of the equation is solved separately from the dispersive part. An explicit finite-volume Godunov method is used to approximate the advective part, while a mixed-finite element technique is used to approximate the dispersive part. The dispersive part uses an implicit discretization, which allows it to run stably with a larger time step than the explicit advective step. The potential exists to develop algorithms that run several advective steps, and then one dispersive step that encompasses the time interval of the advective steps. Because the dispersive step is computationally most expensive, schemes can be implemented that are more computationally efficient than non-time-split algorithms. This technique enables scientists to solve problems with high grid Peclet numbers, such as transport problems with sharp solute fronts, without spurious oscillations in the numerical approximation to the solution and with virtually no artificial diffusion.

Novel blood protein based scaffolds for cardiovascular tissue engineering

Directory of Open Access Journals (Sweden)

Kuhn Antonia I.

2016-09-01

Full Text Available A major challenge in cardiovascular tissue engineering is the fabrication of scaffolds, which provide appropriate morphological and mechanical properties while avoiding undesirable immune reactions. In this study electrospinning was used to fabricate scaffolds out of blood proteins for cardiovascular tissue engineering. Lyophilised porcine plasma was dissolved in deionised water at a final concentration of 7.5% m/v and blended with 3.7% m/v PEO. Electrospinning resulted in homogeneous fibre morphologies with a mean fibre diameter of 151 nm, which could be adapted to create macroscopic shapes (mats, tubes. Cross-linking with glutaraldehyde vapour improved the long-term stability of protein based scaffolds in comparison to untreated scaffolds, resulting in a mass loss of 41% and 96% after 28 days of incubation in aqueous solution, respectively.

Nuclear reactions

International Nuclear Information System (INIS)

Lane, A.M.

1980-01-01

In reviewing work at Harwell over the past 25 years on nuclear reactions it is stated that a balance has to be struck in both experiment and theory between work on cross-sections of direct practical relevance to reactors and on those relevant to an overall understanding of reaction processes. The compound nucleus and direct process reactions are described. Having listed the contributions from AERE, Harwell to developments in nuclear reaction research in the period, work on the optical model, neutron capture theory, reactions at doorway states with fine structure, and sum-rules for spectroscopic factors are considered in more detail. (UK)

Extent of reaction in open systems with multiple heterogeneous reactions

Science.gov (United States)

Friedly, John C.

1991-01-01

The familiar batch concept of extent of reaction is reexamined for systems of reactions occurring in open systems. Because species concentrations change as a result of transport processes as well as reactions in open systems, the extent of reaction has been less useful in practice in these applications. It is shown that by defining the extent of the equivalent batch reaction and a second contribution to the extent of reaction due to the transport processes, it is possible to treat the description of the dynamics of flow through porous media accompanied by many chemical reactions in a uniform, concise manner. This approach tends to isolate the reaction terms among themselves and away from the model partial differential equations, thereby enabling treatment of large problems involving both equilibrium and kinetically controlled reactions. Implications on the number of coupled partial differential equations necessary to be solved and on numerical algorithms for solving such problems are discussed. Examples provided illustrate the theory applied to solute transport in groundwater flow.

ReactionMap: an efficient atom-mapping algorithm for chemical reactions.

Science.gov (United States)

Fooshee, David; Andronico, Alessio; Baldi, Pierre

2013-11-25

Large databases of chemical reactions provide new data-mining opportunities and challenges. Key challenges result from the imperfect quality of the data and the fact that many of these reactions are not properly balanced or atom-mapped. Here, we describe ReactionMap, an efficient atom-mapping algorithm. Our approach uses a combination of maximum common chemical subgraph search and minimization of an assignment cost function derived empirically from training data. We use a set of over 259,000 balanced atom-mapped reactions from the SPRESI commercial database to train the system, and we validate it on random sets of 1000 and 17,996 reactions sampled from this pool. These large test sets represent a broad range of chemical reaction types, and ReactionMap correctly maps about 99% of the atoms and about 96% of the reactions, with a mean time per mapping of 2 s. Most correctly mapped reactions are mapped with high confidence. Mapping accuracy compares favorably with ChemAxon's AutoMapper, versions 5 and 6.1, and the DREAM Web tool. These approaches correctly map 60.7%, 86.5%, and 90.3% of the reactions, respectively, on the same data set. A ReactionMap server is available on the ChemDB Web portal at http://cdb.ics.uci.edu .

The Future of Metabolic Engineering and Synthetic Biology: Towards a Systematic Practice

Science.gov (United States)

Yadav, Vikramaditya G.; De Mey, Marjan; Lim, Chin Giaw; Ajikumar, Parayil Kumaran; Stephanopoulos, Gregory

2012-01-01

Industrial biotechnology promises to revolutionize conventional chemical manufacturing in the years ahead, largely owing to the excellent progress in our ability to re-engineer cellular metabolism. However, most successes of metabolic engineering have been confined to over-producing natively synthesized metabolites in E. coli and S. cerevisiae. A major reason for this development has been the descent of metabolic engineering, particularly secondary metabolic engineering, to a collection of demonstrations rather than a systematic practice with generalizable tools. Synthetic biology, a more recent development, faces similar criticisms. Herein, we attempt to lay down a framework around which bioreaction engineering can systematize itself just like chemical reaction engineering. Central to this undertaking is a new approach to engineering secondary metabolism known as ‘multivariate modular metabolic engineering’ (MMME), whose novelty lies in its assessment and elimination of regulatory and pathway bottlenecks by re-defining the metabolic network as a collection of distinct modules. After introducing the core principles of MMME, we shall then present a number of recent developments in secondary metabolic engineering that could potentially serve as its facilitators. It is hoped that the ever-declining costs of de novo gene synthesis; the improved use of bioinformatic tools to mine, sort and analyze biological data; and the increasing sensitivity and sophistication of investigational tools will make the maturation of microbial metabolic engineering an autocatalytic process. Encouraged by these advances, research groups across the world would take up the challenge of secondary metabolite production in simple hosts with renewed vigor, thereby adding to the range of products synthesized using metabolic engineering. PMID:22629571

Spot the difference: engineered and natural nanoparticles in the environment--release, behavior, and fate.

Science.gov (United States)

Wagner, Stephan; Gondikas, Andreas; Neubauer, Elisabeth; Hofmann, Thilo; von der Kammer, Frank

2014-11-10

The production and use of nanoparticles leads to the emission of manufactured or engineered nanoparticles into the environment. Those particles undergo many possible reactions and interactions in the environment they are exposed to. These reactions and the resulting behavior and fate of nanoparticles in the environment have been studied for decades through naturally occurring nanoparticulate (1-100 nm) and colloidal (1-1000 nm) substances. The knowledge gained from these investigations is nowhere near sufficiently complete to create a detailed model of the behavior and fate of engineered nanoparticles in the environment, but is a valuable starting point for the risk assessment of these novel materials. It is the aim of this Review to critically compare naturally observed processes with those found for engineered systems to identify the "nanospecific" properties of manufactured particles and describe critical knowledge gaps relevant for the risk assessment of manufactured nanomaterials in the environment. © 2014 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA. This is an open access article under the terms of the Creative Commons Attribution Non-Commercial NoDerivs License, which permits use and distribution in any medium, provided the original work is properly cited, the use is non-commercial and no modifications or adaptations are made.

Effect of Drying Conditions on the Catalytic Performance, Structure, and Reaction Rates over the Fe-Co-Mn/MgO Catalyst for Production of Light Olefins

Directory of Open Access Journals (Sweden)

Majid Abdouss

2018-01-01

How to Cite: Abdouss, M., Arsalanfar, M., Mirzaei, N., Zamani, Y. (2018. Effect of Drying Conditions on the Catalytic Performance, Structure, and Reaction Rates over the Fe-Co-Mn/MgO Catalyst for Production of Light Olefins. Bulletin of Chemical Reaction Engineering & Catalysis, 13 (1: 97-112 (doi:10.9767/bcrec.13.1.1222.97-112

Harnessing magnetic-mechano actuation in regenerative medicine and tissue engineering.

Science.gov (United States)

Santos, Lívia J; Reis, Rui L; Gomes, Manuela E

2015-08-01

Mechanical stimulus is of upmost importance in tissues developmental and regeneration processes as well as in maintaining body homeostasis. Classical physiological reactions encompass an increase of blood vessel diameter upon exposure to high blood pressure, or the expansion of cortical bone after continuous high-impact exercise. At a cellular level, it is well established that extracellular stiffness, topography, and remote magnetic actuation are instructive mechanical signals for stem cell differentiation. Based on this, biomaterials and their properties can be designed to act as true stem cell regulators, eventually leading to important advances in conventional tissue engineering techniques. This review identifies the latest advances and tremendous potential of magnetic actuation within the scope of regenerative medicine and tissue engineering. Copyright © 2015 Elsevier Ltd. All rights reserved.

Integration of an ion engine on the Communications Technology Satellite.

Science.gov (United States)

Payne, W. F.; Finke, R. C.

1972-01-01

An ion engine subsystem intended for satellite stationkeeping tasks is described. Ion thrusters are chosen to perform the task because the specific impulse is at least an order of magnitude higher than the commonly used reaction control jets. The higher the value of specific impulse, the greater the total impulse that can be attained for a given weight of propellant, hence cost benefits result. The integration, subsystem testing, and the operating plans for the ion engine experiment to be flown in 1975 on the Canadian Communications Technology Satellite (CTS) are described. The subsystem is designed to demonstrate north-south stationkeeping, attitude control by means of thrust vectoring, long-term space storage and restart capability, and compatibility with a high powered communications transponder.

Quick Reaction Report on the Audit of the Army Contract with the University of Texas at Austin Institute for Advanced Technology

Science.gov (United States)

1992-10-27

Oct 27, 1992 Title: Audit Report Office Of The Inspector General: Quick Reaction Report On The Audit Of The Army Contract With The University Of Texas...ENGINEERING "INSPECTOR GENERAL, DEPARTMENT OF THE ARMY SUBJECT: Quick-Reaction Report on the Audit of the Army Contract with the University of Texas...additional comments on Recommendation 3. by November 27, 1992. The courtesies extended to the audit staff are appreciated. If you have any questions on

Reversible S-nitrosylation in an engineered azurin

Energy Technology Data Exchange (ETDEWEB)

Tian, Shiliang; Liu, Jing; Cowley, Ryan E.; Hosseinzadeh, Parisa; Marshall, Nicholas M.; Yu, Yang; Robinson, Howard; Nilges, Mark J.; Blackburn, Ninian J.; Solomon, Edward I.; Lu, Yi

2016-04-25

S-Nitrosothiols are known as reagents for NO storage and transportation and as regulators in many physiological processes. Although the S-nitrosylation catalysed by haem proteins is well known, no direct evidence of S-nitrosylation in copper proteins has been reported. Here, we report reversible insertion of NO into a copper–thiolate bond in an engineered copper centre in Pseudomonas aeruginosa azurin by rational design of the primary coordination sphere and tuning its reduction potential by deleting a hydrogen bond in the secondary coordination sphere. The results not only provide the first direct evidence of S-nitrosylation of Cu(II)-bound cysteine in metalloproteins, but also shed light on the reaction mechanism and structural features responsible for stabilizing the elusive Cu(I)–S(Cys)NO species. The fast, efficient and reversible S-nitrosylation reaction is used to demonstrate its ability to prevent NO inhibition of cytochrome bo3 oxidase activity by competing for NO binding with the native enzyme under physiologically relevant conditions.

An engineering context for software engineering

OpenAIRE

Riehle, Richard D.

2008-01-01

New engineering disciplines are emerging in the late Twentieth and early Twenty-first Century. One such emerging discipline is software engineering. The engineering community at large has long harbored a sense of skepticism about the validity of the term software engineering. During most of the fifty-plus years of software practice, that skepticism was probably justified. Professional education of software developers often fell short of the standard expected for conventional engineers; so...

Activation cross section and isomeric cross section ratios for the (n ,2 n ) reaction on 153Eu

Science.gov (United States)

Luo, Junhua; Jiang, Li; Li, Suyuan

2017-10-01

The 153Eu(n ,2 n ) m1,m2,g152Eu cross section was measured by means of the activation technique at three neutron energies in the range 13-15 MeV. The quasimonoenergetic neutron beam was formed via the 3H(d ,n ) 4He reaction, in the Pd-300 Neutron Generator at the Chinese Academy of Engineering Physics (CAEP). The activities induced in the reaction products were measured using high-resolution γ-ray spectroscopy. The cross section of the population of the second high-spin (8-) isomeric state was measured along with the reaction cross section populating both the ground (3-) and the first isomeric state (0-). Cross sections were also evaluated theoretically using the numerical code TALYS-1.8, with different level density options at neutron energies varying from the reaction threshold to 20 MeV. Results are discussed and compared with the corresponding literature.

Engineering opportunities in nuclear engineering

International Nuclear Information System (INIS)

Walton, D.G.

1980-01-01

The pattern of education and training of Nuclear Engineers in the UK is outlined under the headings; degree courses for professional engineers, postgraduate courses, education of technician engineers. Universities which offer specific courses are stated and useful addresses listed. (UK)

PhreeqcRM: A reaction module for transport simulators based on the geochemical model PHREEQC

Science.gov (United States)

Parkhurst, David L.; Wissmeier, Laurin

2015-01-01

PhreeqcRM is a geochemical reaction module designed specifically to perform equilibrium and kinetic reaction calculations for reactive transport simulators that use an operator-splitting approach. The basic function of the reaction module is to take component concentrations from the model cells of the transport simulator, run geochemical reactions, and return updated component concentrations to the transport simulator. If multicomponent diffusion is modeled (e.g., Nernst–Planck equation), then aqueous species concentrations can be used instead of component concentrations. The reaction capabilities are a complete implementation of the reaction capabilities of PHREEQC. In each cell, the reaction module maintains the composition of all of the reactants, which may include minerals, exchangers, surface complexers, gas phases, solid solutions, and user-defined kinetic reactants.PhreeqcRM assigns initial and boundary conditions for model cells based on standard PHREEQC input definitions (files or strings) of chemical compositions of solutions and reactants. Additional PhreeqcRM capabilities include methods to eliminate reaction calculations for inactive parts of a model domain, transfer concentrations and other model properties, and retrieve selected results. The module demonstrates good scalability for parallel processing by using multiprocessing with MPI (message passing interface) on distributed memory systems, and limited scalability using multithreading with OpenMP on shared memory systems. PhreeqcRM is written in C++, but interfaces allow methods to be called from C or Fortran. By using the PhreeqcRM reaction module, an existing multicomponent transport simulator can be extended to simulate a wide range of geochemical reactions. Results of the implementation of PhreeqcRM as the reaction engine for transport simulators PHAST and FEFLOW are shown by using an analytical solution and the reactive transport benchmark of MoMaS.

ENGINEERED BARRIER SYSTEM: PHYSICAL AND CHEMICAL ENVIRONMENT

International Nuclear Information System (INIS)

R. Jarek

2005-01-01

The purpose of this model report is to describe the evolution of the physical and chemical environmental conditions within the waste emplacement drifts of the repository, including the drip shield and waste package surfaces. The resulting seepage evaporation and gas abstraction models are used in the total system performance assessment for the license application (TSPA-LA) to assess the performance of the engineered barrier system and the waste form. This report develops and documents a set of abstraction-level models that describe the engineered barrier system physical and chemical environment. Where possible, these models use information directly from other reports as input, which promotes integration among process models used for TSPA-LA. Specific tasks and activities of modeling the physical and chemical environment are included in ''Technical Work Plan for: Near-Field Environment and Transport In-Drift Geochemistry Model Report Integration'' (BSC 2005 [DIRS 173782], Section 1.2.2). As described in the technical work plan, the development of this report is coordinated with the development of other engineered barrier system reports. To be consistent with other project documents that address features, events, and processes (FEPs), Table 6.14.1 of the current report includes updates to FEP numbers and FEP subjects for two FEPs identified in the technical work plan (TWP) governing this report (BSC 2005 [DIRS 173782]). FEP 2.1.09.06.0A (Reduction-oxidation potential in EBS), as listed in Table 2 of the TWP (BSC 2005 [DIRS 173782]), has been updated in the current report to FEP 2.1.09.06.0B (Reduction-oxidation potential in Drifts; see Table 6.14-1). FEP 2.1.09.07.0A (Reaction kinetics in EBS), as listed in Table 2 of the TWP (BSC 2005 [DIRS 173782]), has been updated in the current report to FEP 2.1.09.07.0B (Reaction kinetics in Drifts; see Table 6.14-1). These deviations from the TWP are justified because they improve integration with FEPs documents. The updates

Humanitarian engineering in the engineering curriculum

Science.gov (United States)

Vandersteen, Jonathan Daniel James

There are many opportunities to use engineering skills to improve the conditions for marginalized communities, but our current engineering education praxis does not instruct on how engineering can be a force for human development. In a time of great inequality and exploitation, the desire to work with the impoverished is prevalent, and it has been proposed to adjust the engineering curriculum to include a larger focus on human needs. This proposed curriculum philosophy is called humanitarian engineering. Professional engineers have played an important role in the modern history of power, wealth, economic development, war, and industrialization; they have also contributed to infrastructure, sanitation, and energy sources necessary to meet human need. Engineers are currently at an important point in time when they must look back on their history in order to be more clear about how to move forward. The changing role of the engineer in history puts into context the call for a more balanced, community-centred engineering curriculum. Qualitative, phenomenographic research was conducted in order to understand the need, opportunity, benefits, and limitations of a proposed humanitarian engineering curriculum. The potential role of the engineer in marginalized communities and details regarding what a humanitarian engineering program could look like were also investigated. Thirty-two semi-structured research interviews were conducted in Canada and Ghana in order to collect a pool of understanding before a phenomenographic analysis resulted in five distinct outcome spaces. The data suggests that an effective curriculum design will include teaching technical skills in conjunction with instructing about issues of social justice, social location, cultural awareness, root causes of marginalization, a broader understanding of technology, and unlearning many elements about the role of the engineer and the dominant economic/political ideology. Cross-cultural engineering development

Comparative yield of positive brain Computed Tomography after implementing the NICE or SIGN head injury guidelines in two equivalent urban populations

International Nuclear Information System (INIS)

Summerfield, R.; Macduff, R.; Davis, R.; Sambrook, M.; Britton, I.

2011-01-01

Aims: To compare the yield of positive computed tomography (CT) brain examinations after the implementation of the National Institute for Clinical Excellence (NICE) or the Scottish Intercollegiate Guidance Network (SIGN) guidelines, in comparable urban populations in two teaching hospitals in England and Scotland. Materials and methods: Four hundred consecutive patients presenting at each location following a head injury who underwent a CT examination of the head according to the locally implemented guidelines were compared. Similar matched populations were compared for indication and yield. Yield was measured according to (1) positive CT findings of the sequelae of trauma and (2) intervention required with anaesthetic or intensive care unit (ICU) support, or neurosurgery. Results: The mean ages of patients at the English and Scottish centres were 49.9 and 49.2 years, respectively. Sex distribution was 64.1% male and 66.4% male respectively. Comparative yield was 23.8 and 26.5% for positive brain scans, 3 and 2.75% for anaesthetic support, and 3.75 and 2.5% for neurosurgical intervention. Glasgow Coma Score (GCS) 10% yield of positive scans. The choice of guideline to follow should be at the discretion of the local institution. The indications GCS <13 and clinical or radiological evidence of a skull fracture are highly predictive of intracranial pathology, and their presence should be an absolute indicator for fast-tracking the management of the patient.

Engineered Trehalose Permeable to Mammalian Cells.

Directory of Open Access Journals (Sweden)

Alireza Abazari

Full Text Available Trehalose is a naturally occurring disaccharide which is associated with extraordinary stress-tolerance capacity in certain species of unicellular and multicellular organisms. In mammalian cells, presence of intra- and extracellular trehalose has been shown to confer improved tolerance against freezing and desiccation. Since mammalian cells do not synthesize nor import trehalose, the development of novel methods for efficient intracellular delivery of trehalose has been an ongoing investigation. Herein, we studied the membrane permeability of engineered lipophilic derivatives of trehalose. Trehalose conjugated with 6 acetyl groups (trehalose hexaacetate or 6-O-Ac-Tre demonstrated superior permeability in rat hepatocytes compared with regular trehalose, trehalose diacetate (2-O-Ac-Tre and trehalose tetraacetate (4-O-Ac-Tre. Once in the cell, intracellular esterases hydrolyzed the 6-O-Ac-Tre molecules, releasing free trehalose into the cytoplasm. The total concentration of intracellular trehalose (plus acetylated variants reached as high as 10 fold the extracellular concentration of 6-O-Ac-Tre, attaining concentrations suitable for applications in biopreservation. To describe this accumulation phenomenon, a diffusion-reaction model was proposed and the permeability and reaction kinetics of 6-O-Ac-Tre were determined by fitting to experimental data. Further studies suggested that the impact of the loading and the presence of intracellular trehalose on cellular viability and function were negligible. Engineering of trehalose chemical structure rather than manipulating the cell, is an innocuous, cell-friendly method for trehalose delivery, with demonstrated potential for trehalose loading in different types of cells and cell lines, and can facilitate the wide-spread application of trehalose as an intracellular protective agent in biopreservation studies.

The future of metabolic engineering and synthetic biology: towards a systematic practice.

Science.gov (United States)

Yadav, Vikramaditya G; De Mey, Marjan; Lim, Chin Giaw; Ajikumar, Parayil Kumaran; Stephanopoulos, Gregory

2012-05-01

Industrial biotechnology promises to revolutionize conventional chemical manufacturing in the years ahead, largely owing to the excellent progress in our ability to re-engineer cellular metabolism. However, most successes of metabolic engineering have been confined to over-producing natively synthesized metabolites in E. coli and S. cerevisiae. A major reason for this development has been the descent of metabolic engineering, particularly secondary metabolic engineering, to a collection of demonstrations rather than a systematic practice with generalizable tools. Synthetic biology, a more recent development, faces similar criticisms. Herein, we attempt to lay down a framework around which bioreaction engineering can systematize itself just like chemical reaction engineering. Central to this undertaking is a new approach to engineering secondary metabolism known as 'multivariate modular metabolic engineering' (MMME), whose novelty lies in its assessment and elimination of regulatory and pathway bottlenecks by re-defining the metabolic network as a collection of distinct modules. After introducing the core principles of MMME, we shall then present a number of recent developments in secondary metabolic engineering that could potentially serve as its facilitators. It is hoped that the ever-declining costs of de novo gene synthesis; the improved use of bioinformatic tools to mine, sort and analyze biological data; and the increasing sensitivity and sophistication of investigational tools will make the maturation of microbial metabolic engineering an autocatalytic process. Encouraged by these advances, research groups across the world would take up the challenge of secondary metabolite production in simple hosts with renewed vigor, thereby adding to the range of products synthesized using metabolic engineering. Copyright © 2011 Elsevier Inc. All rights reserved.

Physics of antimatter-matter reactions for interstellar propulsion

International Nuclear Information System (INIS)

Morgan, D.L. Jr.

1986-01-01

At the stage of the antiproton-nucleon annihilation chain of events relevant to propulsion the annihilation produces energetic charged pions and gamma rays. If annihilation occurs in a complex nucleus, protons, neutrons, and other nuclear fragments are also produced. The charge, number, and energy of the annihilation products are such that annihilation rocket engine concepts involving relatively low specific impulse (I/sub sp/ ≅ 1000 to 2000 s) and very high I/sub sp/ (3 x 10 7 s) appear feasible and have efficiencies on the order of 50% for annihilation energy to propulsion energy conversion. At I/sub sp/'s of around 15,000 s, however, it may be that only the kinetic energy of the charged nuclear fragments can be utilized for propulsion in engines of ordinary size. An estimate of this kinetic energy was made from known pieces of experimental and theoretical information. Its value is about 10% of the annihilation energy. Control over the mean penetration depth of protons into matter prior to annihilation is necessary so that annihilation occurs in the proper region within the engine. Control is possible by varying the antiproton kinetic energy to obtain a suitable annihilation cross section. The annihilation cross section at low energies is on the order of or larger than atomic areas due to a rearrangement reaction, but it is very low at high energy where its value is closer to nuclear areas

Final Report for NFE-07-00912: Development of Model Fuels Experimental Engine Data Base & Kinetic Modeling Parameter Sets

Energy Technology Data Exchange (ETDEWEB)

Bunting, Bruce G [ORNL

2012-10-01

The automotive and engine industries are in a period of very rapid change being driven by new emission standards, new types of after treatment, new combustion strategies, the introduction of new fuels, and drive for increased fuel economy and efficiency. The rapid pace of these changes has put more pressure on the need for modeling of engine combustion and performance, in order to shorten product design and introduction cycles. New combustion strategies include homogeneous charge compression ignition (HCCI), partial-premixed combustion compression ignition (PCCI), and dilute low temperature combustion which are being developed for lower emissions and improved fuel economy. New fuels include bio-fuels such as ethanol or bio-diesel, drop-in bio-derived fuels and those derived from new crude oil sources such as gas-to-liquids, coal-to-liquids, oil sands, oil shale, and wet natural gas. Kinetic modeling of the combustion process for these new combustion regimes and fuels is necessary in order to allow modeling and performance assessment for engine design purposes. In this research covered by this CRADA, ORNL developed and supplied experimental data related to engine performance with new fuels and new combustion strategies along with interpretation and analysis of such data and consulting to Reaction Design, Inc. (RD). RD performed additional analysis of this data in order to extract important parameters and to confirm engine and kinetic models. The data generated was generally published to make it available to the engine and automotive design communities and also to the Reaction Design Model Fuels Consortium (MFC).

Rules for biocatalyst and reaction engineering to implement effective, NAD(P)H-dependent, whole cell bioreductions

DEFF Research Database (Denmark)

Kratzer, Regina; Woodley, John; Nidetzky, Bernd

2015-01-01

recycling mode and reaction conditions represent design options that strongly affect bioreduction efficiency. In this paper, each option was critically scrutinized and decision rules formulated based on well-described literature examples. The development chain was visualized as a decision-tree that can...

[Advances in metabolic engineering for the microbial production of naturally occurring terpenes-limonene and bisabolene: a mini review].

Science.gov (United States)

Pang, Yaru; Hu, Zhihui; Xiao, Dongguang; Yu, Aiqun

2018-01-25

Limonene (C₁₀H₁₆) and bisabolene (C₁₅H₂₄) are both naturally occurring terpenes in plants. Depending on the number of C₅ units, limonene and bisabolene are recognized as representative monoterpenes and sesquiterpenes, respectively. Limonene and bisabolene are important pharmaceutical and nutraceutical products used in the prevention and treatment of cancer and many other diseases. In addition, they can be used as starting materials to produce a range of commercially valuable products, such as pharmaceuticals, nutraceuticals, cosmetics, and biofuels. The low abundance or yield of limonene and bisabolene in plants renders their isolation from plant sources non-economically viable. Isolation of limonene and bisabolene from plants also suffers from low efficiency and often requires harsh reaction conditions, prolonged reaction times, and expensive equipment cost. Recently, the rapid developments in metabolic engineering of microbes provide a promising alternative route for producing these plant natural products. Therefore, producing limonene and bisabolene by engineering microbial cells into microbial factories is becoming an attractive alternative approach that can overcome the bottlenecks, making it more sustainable, environmentally friendly and economically competitive. Here, we reviewed the status of metabolic engineering of microbes that produce limonene and bisabolene including microbial hosts, key enzymes, metabolic pathways and engineering of limonene/bisabolene biosynthesis. Furthermore, key challenges and future perspectives were discussed.

Generating an Engineered Adipose Tissue Flap Using an External Suspension Device.

Science.gov (United States)

Wan, Jinlin; Dong, Ziqing; Lei, Chen; Lu, Feng

2016-07-01

The tissue-engineering chamber technique can generate large volumes of adipose tissue, which provides a potential solution for the complex reconstruction of large soft-tissue defects. However, major drawbacks of this technique are the foreign-body reaction and the volume limitation imposed by the chamber. In this study, the authors developed a novel tissue-engineering method using a specially designed external suspension device that generates an optimized volume of adipose flap and avoids the implantation of foreign material. The rabbits were processed using two different tissue-engineering methods, the external suspension device technique and the traditional tissue-engineering chamber technique. The adipose flaps generated by the external suspension device had a normal adipose tissue structure that was as good as that generated by the traditional tissue-engineering chamber, but the flap volume was much larger. The final volume of the engineered adipose flap grew between weeks 0 and 36 from 5.1 ml to 30.7 ml in the traditional tissue-engineering chamber group and to 80.5 ml in the external suspension device group. During the generation process, there were no marked differences between the two methods in terms of structural and cellular changes of the flap, except that the flaps in the traditional tissue-engineering chamber group had a thicker capsule at the early stage. In addition, the enlarged flaps generated by the external suspension device could be reshaped into specific shapes by the implant chamber. This minimally invasive external suspension device technique can generate large-volume adipose flaps. Combined with a reshaping method, this technique should facilitate clinical application of adipose tissue engineering.

Click hydrogels, microgels and nanogels: emerging platforms for drug delivery and tissue engineering.

Science.gov (United States)

Jiang, Yanjiao; Chen, Jing; Deng, Chao; Suuronen, Erik J; Zhong, Zhiyuan

2014-06-01

Hydrogels, microgels and nanogels have emerged as versatile and viable platforms for sustained protein release, targeted drug delivery, and tissue engineering due to excellent biocompatibility, a microporous structure with tunable porosity and pore size, and dimensions spanning from human organs, cells to viruses. In the past decade, remarkable advances in hydrogels, microgels and nanogels have been achieved with click chemistry. It is a most promising strategy to prepare gels with varying dimensions owing to its high reactivity, superb selectivity, and mild reaction conditions. In particular, the recent development of copper-free click chemistry such as strain-promoted azide-alkyne cycloaddition, radical mediated thiol-ene chemistry, Diels-Alder reaction, tetrazole-alkene photo-click chemistry, and oxime reaction renders it possible to form hydrogels, microgels and nanogels without the use of potentially toxic catalysts or immunogenic enzymes that are commonly required. Notably, unlike other chemical approaches, click chemistry owing to its unique bioorthogonal feature does not interfere with encapsulated bioactives such as living cells, proteins and drugs and furthermore allows versatile preparation of micropatterned biomimetic hydrogels, functional microgels and nanogels. In this review, recent exciting developments in click hydrogels, microgels and nanogels, as well as their biomedical applications such as controlled protein and drug release, tissue engineering, and regenerative medicine are presented and discussed. Copyright © 2014 Elsevier Ltd. All rights reserved.

Large-scale networks in engineering and life sciences

CERN Document Server

Findeisen, Rolf; Flockerzi, Dietrich; Reichl, Udo; Sundmacher, Kai

2014-01-01

This edited volume provides insights into and tools for the modeling, analysis, optimization, and control of large-scale networks in the life sciences and in engineering. Large-scale systems are often the result of networked interactions between a large number of subsystems, and their analysis and control are becoming increasingly important. The chapters of this book present the basic concepts and theoretical foundations of network theory and discuss its applications in different scientific areas such as biochemical reactions, chemical production processes, systems biology, electrical circuits, and mobile agents. The aim is to identify common concepts, to understand the underlying mathematical ideas, and to inspire discussions across the borders of the various disciplines.  The book originates from the interdisciplinary summer school “Large Scale Networks in Engineering and Life Sciences” hosted by the International Max Planck Research School Magdeburg, September 26-30, 2011, and will therefore be of int...

Design of an embedded inverse-feedforward biomolecular tracking controller for enzymatic reaction processes

OpenAIRE

Foo, Mathias; Kim, Jongrae; Sawlekar, Rucha; Bates, Declan G.

2017-01-01

Feedback control is widely used in chemical engineering to improve the performance and robustness of chemical processes. Feedback controllers require a ‘subtractor’ that is able to compute the error between the process output and the reference signal. In the case of embedded biomolecular control circuits, subtractors designed using standard chemical reaction network theory can only realise one-sided subtraction, rendering standard controller design approaches inadequate. Here, we show how a b...

I.C. Engine emission reduction by copper oxide catalytic converter

Science.gov (United States)

Venkatesan, S. P.; Shubham Uday, Desai; Karan Hemant, Borana; Rajarshi Kushwanth Goud, Kagita; Lakshmana Kumar, G.; Pavan Kumar, K.

2017-05-01

The toxic gases emitted from diesel engines are more than petrol engines. Predicting the use of diesel engines, even more in future, this system is developed and can be used to minimize the harmful gases. Toxic gases include NOX, CO, HC and Smoke which are harmful to the atmosphere as well as to the human beings. The main aim of this work is to fabricate system, where the level of intensity of toxic gases is controlled through chemical reaction to more agreeable level. This system acts itself as an exhaust system; hence there is no needs to fit separate the silencer. The whole assembly is fitted in the exhaust pipe from engine. In this work, catalytic converter with copper oxide as a catalyst, by replacing noble catalysts such as platinum, palladium and rhodium is fabricated and fitted in the engine exhaust. With and without catalytic converter, the experimentations are carried out at different loads such as 0%, 25%, 50%, 75%, and 100% of maximum rated load. From the experimental results it is found that the maximum reduction is 32%, 61% and 21% for HC, NOx and CO respectively at 100% of maximum rated load when compared to that of without catalytic converter. This catalytic converter system is cash effective and more economical than the existing catalytic converter.

Reaction path analysis of sodium-water reaction phenomena in support of chemical reaction model development

International Nuclear Information System (INIS)

Kikuchi, Shin; Ohshima, Hiroyuki; Hashimoto, Kenro

2011-01-01

Computational study of the sodium-water reaction at the gas (water) - liquid (sodium) interface has been carried out using ab initio (first-principle) method. A possible reaction channel has been identified for the stepwise OH bond dissociations of a single water molecule. The energetics including the binding energy of a water molecule to the sodium surface, the activation energies of the bond cleavages, and the reaction energies, have been evaluated, and the rate constants of the first and second OH bond-breakings have been compared. The results are used as the basis for constructing the chemical reaction model used in a multi-dimensional sodium-water reaction code, SERAPHIM, being developed by JAEA toward the safety assessment of the steam generator (SG) in a sodium-cooled fast reactor (SFR). (author)

Development and validation of a reduced combined biodiesel–diesel reaction mechanism

DEFF Research Database (Denmark)

Ng, Hoon Kiat; Gan, Suyin; Ng, Jo-Han

2013-01-01

In this study, a compact combined biodiesel–diesel (CBD) reaction mechanism for diesel engine simulations is proposed through the combination of three component mechanisms using a chemical class-based approach. The proposed mechanism comprises the reaction mechanisms of methyl crotonate (MC...... to characterise the combustion of fossil diesel. Here, the MC and MB mechanisms are reduced before integrating with a compact n-heptane mechanism. CHEMKIN-PRO is used as the solver for the zero-dimensional, closed homogenous reactor with a constant volume in this study. In the first phase, the mechanisms of MC...... ranging from initial temperatures of 750–1350 K, pressures of 40–60 bar and equivalence ratios of 0.4–1.5. The mechanism is generally found to accurately predict the timing and duration of ID for the combustion of each surrogate fuel. This model is also shown to be feasible for use with multidimensional...

Quiet engine program flight engine design study

Science.gov (United States)

Klapproth, J. F.; Neitzel, R. E.; Seeley, C. T.

1974-01-01

The results are presented of a preliminary flight engine design study based on the Quiet Engine Program high-bypass, low-noise turbofan engines. Engine configurations, weight, noise characteristics, and performance over a range of flight conditions typical of a subsonic transport aircraft were considered. High and low tip speed engines in various acoustically treated nacelle configurations were included.

Production of biodiesel by enzymatic transesterification of waste sardine oil and evaluation of its engine performance

Directory of Open Access Journals (Sweden)

A. Arumugam

2017-12-01

Full Text Available Waste sardine oil, a byproduct of fish industry, was employed as a low cost feedstock for biodiesel production. It has relatively high free fatty acid (FFA content (32 mg KOH/g of oil. Lipase enzyme immobilized on activated carbon was used as the catalyst for the transesterification reaction. Process variables viz. reaction temperature, water content and oil to methanol molar ratio were optimized. Optimum methanol to oil molar ratio, water content and temperature were found to be 9:1, 10 v/v% and 30 °C respectively. Reusability of immobilized lipase was studied and it was found after 5 cycles of reuse there was about 13% drop in FAME yield. Engine performance of the produced biodiesel was studied in a Variable Compression Engine and the results confirm that waste sardine oil is a potential alternate and low-cost feedstock for biodiesel production.

Metabolic engineering of Saccharomyces cerevisiae for production of germacrene A, a precursor of beta-elemene

DEFF Research Database (Denmark)

Hu, Yating; Zhou, Yongjin J.; Bao, Jichen

2017-01-01

inefficient and suffers from limited natural resources. Here, we engineered a yeast cell factory for the sustainable production of germacrene A, which can be transformed to beta-elemene by a one-step chemical reaction in vitro. Two heterologous germacrene A synthases (GASs) converting farnesyl pyrophosphate...... (FPP) to germacrene A were evaluated in yeast for their ability to produce germacrene A. Thereafter, several metabolic engineering strategies were used to improve the production level. Overexpression of truncated 3-hydroxyl-3-methylglutaryl-CoA reductase and fusion of FPP synthase with GAS, led...

Metabolic Engineering for Substrate Co-utilization

Science.gov (United States)

Gawand, Pratish

Production of biofuels and bio-based chemicals is being increasingly pursued by chemical industry to reduce its dependence on petroleum. Lignocellulosic biomass (LCB) is an abundant source of sugars that can be used for producing biofuels and bio-based chemicals using fermentation. Hydrolysis of LCB results in a mixture of sugars mainly composed of glucose and xylose. Fermentation of such a sugar mixture presents multiple technical challenges at industrial scale. Most industrial microorganisms utilize sugars in a sequential manner due to the regulatory phenomenon of carbon catabolite repression (CCR). Due to sequential utilization of sugars, the LCB-based fermentation processes suffer low productivities and complicated operation. Performance of fermentation processes can be improved by metabolic engineering of microorganisms to obtain superior characteristics such as high product yield. With increased computational power and availability of complete genomes of microorganisms, use of model-based metabolic engineering is now a common practice. The problem of sequential sugar utilization, however, is a regulatory problem, and metabolic models have never been used to solve such regulatory problems. The focus of this thesis is to use model-guided metabolic engineering to construct industrial strains capable of co-utilizing sugars. First, we develop a novel bilevel optimization algorithm SimUp, that uses metabolic models to identify reaction deletion strategies to force co-utilization of two sugars. We then use SimUp to identify reaction deletion strategies to force glucose-xylose co-utilization in Escherichia coli. To validate SimUp predictions, we construct three mutants with multiple gene knockouts and test them for glucose-xylose utilization characteristics. Two mutants, designated as LMSE2 and LMSE5, are shown to co-utilize glucose and xylose in agreement with SimUp predictions. To understand the molecular mechanism involved in glucose-xylose co-utilization of the

Organic Reactions in Aqueous Media (by Chao-Jun Li and Tak-Hang Chan)

Science.gov (United States)

Rosan, Reviewed Alan M.

2000-06-01

This concise book joins the series of Wiley Interscience special topic publications. In seven chapters it selectively reviews the burgeoning literature on organic reactions conducted in water or in aqueous media as a reaction cosolvent, nicely complementing another recent book on the subject by Grieco. Following a short introduction there are six chapters that vary in length from 10 to 50 pages; they cover pericyclic reactions, nucleophilic additions and substitutions, metal-mediated reactions, transition metal-catalyzed reactions, oxidation and reduction reactions, and industrial applications. These chapters, each of which is prefaced with a short provocative quotation, also vary in depth, containing from 11 to more than 180 references. The literature is complete through 1996 and commendably includes citations of original papers by Barbier, Faraday, Frankland, Grignard, Kolbe, Lapworth, and Reformatsky as well as references to selected U.S. and foreign patents and the Russian literature. There is a subject index but no author index. This book is timely and effective. From the title, one might expect a broad discussion of the unique properties of water and water-soluble components (salts, surfactants, etc.) that would be thought to bear on organic reactivity. The first chapter opens by noting that water is the most abundant volatile material in comets and briefly describes those properties that suggest its utility as a solvent or cosolvent, summarizing the potential technical, economic, and environmental advantages. Also described are the remarkable changes in density, conductance, heat capacity, dielectric constant, and ionization constant that accompany the transition to the critical point, but the emphasis here is on the effect of water under non-critical conditions. Discussion of the structure of liquid water and the role of hydrogen bonding in mediating molecular recognition events is abbreviated. In fact, the term "hydrogen bond" is surprisingly absent from

Impact of UK NICE clinical guidelines 168 on referrals to a specialist academic leg ulcer service.

Science.gov (United States)

Davies, Huw Ob; Popplewell, Matthew; Bate, Gareth; Kelly, Lisa; Darvall, Katy; Bradbury, Andrew W

2018-03-01

Background Leg ulcers are a common cause of morbidity and disability and result in significant health and social care expenditure. The UK National Institute for Health and Care Excellence (NICE) Clinical Guideline (CG)168, published in July 2013, sought to improve care of patients with leg ulcers, recommending that patients with a break in the skin below the knee that had not healed within two weeks be referred to a specialist vascular service for diagnosis and management. Aim Determine the impact of CG168 on referrals to a leg ulcer service. Methods Patients referred with leg ulceration during an 18-month period prior to CG168 (January 2012-June 2013) and an 18-month period commencing six months after (January 2014-June 2015) publication of CG168 were compared. Results There was a two-fold increase in referrals (181 patients, 220 legs vs. 385 patients, 453 legs) but no change in mean age, gender or median-duration of ulcer at referral (16.6 vs. 16.2 weeks). Mean-time from referral to specialist appointment increased (4.8 vs. 6 weeks, p = 0.0001), as did legs with superficial venous insufficiency (SVI) (36% vs. 44%, p = 0.05). There was a trend towards more SVI endovenous interventions (32% vs. 39%, p = 0.271) with an increase in endothermal (2 vs. 32 legs, p = 0.001) but no change in sclerotherapy (24 vs. 51 legs) treatments. In both groups, 62% legs had compression. There was a reduction in legs treated conservatively with simple dressings (26% vs. 15%, p = 0.0006). Conclusions Since CG168, there has been a considerable increase in leg ulcer referrals. However, patients are still not referred until ulceration has been present for many months. Although many ulcers are multi-factorial and the mainstay of treatment remains compression, there has been an increase in SVI endovenous intervention. Further efforts are required to persuade community practitioners to refer patients earlier, to educate patients and encourage further investment in

NASA Ares I Launch Vehicle Roll and Reaction Control Systems Design Status

Science.gov (United States)

Butt, Adam; Popp, Chris G.; Pitts, Hank M.; Sharp, David J.

2009-01-01

This paper provides an update of design status following the preliminary design review of NASA s Ares I first stage roll and upper stage reaction control systems. The Ares I launch vehicle has been chosen to return humans to the moon, mars, and beyond. It consists of a first stage five segment solid rocket booster and an upper stage liquid bi-propellant J-2X engine. Similar to many launch vehicles, the Ares I has reaction control systems used to provide the vehicle with three degrees of freedom stabilization during the mission. During launch, the first stage roll control system will provide the Ares I with the ability to counteract induced roll torque. After first stage booster separation, the upper stage reaction control system will provide the upper stage element with three degrees of freedom control as needed. Trade studies and design assessments conducted on the roll and reaction control systems include: propellant selection, thruster arrangement, pressurization system configuration, and system component trades. Since successful completion of the preliminary design review, work has progressed towards the critical design review with accomplishments made in the following areas: pressurant / propellant tank, thruster assembly, and other component configurations, as well as thruster module design, and waterhammer mitigation approach. Also, results from early development testing are discussed along with plans for upcoming system testing. This paper concludes by summarizing the process of down selecting to the current baseline configuration for the Ares I roll and reaction control systems.

Cyanide bioremediation: the potential of engineered nitrilases.

Science.gov (United States)

Park, Jason M; Trevor Sewell, B; Benedik, Michael J

2017-04-01

The cyanide-degrading nitrilases are of notable interest for their potential to remediate cyanide contaminated waste streams, especially as generated in the gold mining, pharmaceutical, and electroplating industries. This review provides a brief overview of cyanide remediation in general but with a particular focus on the cyanide-degrading nitrilases. These are of special interest as the hydrolysis reaction does not require secondary substrates or cofactors, making these enzymes particularly good candidates for industrial remediation processes. The genetic approaches that have been used to date for engineering improved enzymes are described; however, recent structural insights provide a promising new approach.

Modeling study on the effect of piston bowl geometries in a gasoline/biodiesel fueled RCCI engine at high speed

International Nuclear Information System (INIS)

Li, J.; Yang, W.M.; Zhou, D.Z.

2016-01-01

Highlights: • The RCCI engine fueled with gasoline and biodiesel is simulated. • The effect of piston bowl geometry is investigated. • The throat diameter of a piston can affect combustion process. • SCC shows superiority among three investigated geometries for RCCI combustion. - Abstract: This paper reports the numerical investigation on the effects of three bowl geometries on a gasoline/biodiesel fueled RCCI engine operated at high engine speed. The three bowl geometries are HCC (Hemispherical Combustion Chamber), SCC (Shallow depth Combustion Chamber) and OCC (Omega Combustion Chamber). To simulate the combustion in an RCCI engine, coupled KIVA4–CHEMKIN code was used. One recently developed reaction mechanism, which contains 107 species and 425 reactions, was adopted in this study to mimic the combustion of gasoline and biodiesel. During the simulation, the engine speed was fixed at 3600 rpm. The low reactivity fuel gasoline was premixed with air with energy percentages of 20% and 40%; accordingly, to maintain the same energy input, the percentages of biodiesel were 80% and 60% (B80 and B60). In addition, the SOI timing was varied at three levels: −11, −35 and −60 deg ATDC for B80 and B60, respectively. With SOI timing of −11 deg ATDC, the combustion is mixing-controlled; in contrast, advancing SOI timing to −60 deg ATDC, the combustion turns into the reactivity-controlled. Comparing the results on combustion characteristics, engine performance and emissions among different bowl geometries, it is concluded that the original OCC design for Toyota diesel engine is better for mixing-controlled combustion; whereas, SCC is the most suitable piston design for RCCI combustion among the three selected geometries under the investigated operating conditions of the engine. With SCC, better combustion and performance can be achieved while maintaining relatively lower CO, NO and soot emissions.

Studies in the reaction dynamics of beam-gas chemiluminescent reactions

International Nuclear Information System (INIS)

Prisant, M.G.

1984-01-01

This thesis develops techniques for the analysis and interpretation of data obtained from beam-gas chemiluminescence experiments. These techniques are applied to experimental studies of atom transfer reactions of the type A + BC → AB + C. A procedure is developed for determining the product rotational alignment in the center-of-mass frame from polarization measurements of chemiluminescent atom-diatom exchange reactions under beam-gas conditions. Knowledge of a vector property of a reaction, such as product alignment, provides information on the disposition of angular momentum by a chemical reaction. Fluorescence polarization and hence product alignment are measured for two prototype reactions. The reaction of metastable calcium atoms with hydrogen-chloride gas yields highly aligned calcium-chloride product which exhibits little variation of alignment with vibrational state. The reaction of ground-state calcium with fluorine gas yields moderately aligned product which shows strong variation of alignment with vibration. A multi-surface direct-interaction model is developed to interpret product alignment and population data. The predictions of this model for the reaction of calcium with fluorine show reasonable agreement with experiment

MIT Laboratory for Computer Science Progress Report No. 23, July 1985-June 1986

Science.gov (United States)

1986-06-01

34An Expert System for Diagnosing Gait in Cerebral Palsy Patients," S.M. thesis, MIT Department of Electrical Engineering and Computer Science, Cambridge...barriers to program interoperability. Within our community, we perceive serious problems in building on the work of others, because the different...unmatched tokens. Of course, the name of the game is representation and access to the various data structures, and this has worked out very nicely. GITA

In vitro precultivation alleviates post-implantation inflammation and enhances development of tissue-engineered tubular cartilage

Energy Technology Data Exchange (ETDEWEB)

Luo Xusong; Zhou Guangdong; Liu Wei; Zhang Wenjie; Cui Lei; Cao Yilin [Department of Plastic and Reconstructive Surgery, Shanghai Key Laboratory of Tissue Engineering, Shanghai 9th People' s Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai 200011 (China); Cen Lian, E-mail: guangdongzhou@126.co, E-mail: yilincao@yahoo.co [National Tissue Engineering Center of China, Shanghai 200011 (China)

2009-04-15

Tissue-engineered tubular cartilage is a promising graft for tracheal reconstruction. But polylactic acid/polyglycolic acid (PLA/PGA) fibers, the frequently used scaffolds for cartilage engineering, often elicit an obvious inflammation response following implantation into immunocompetent animals. We propose that the inflammation could be alleviated by in vitro precultivation. In this study, after in vitro culture for either 2 days (direct implantation group (DI)) or for 2 weeks (precultivation implantation group (PI)), autologous tubular chondrocyte-PLA/PGA constructs were subcutaneously implanted into rabbits. In the PI group, after 2 weeks of precultivation, most of the fibers were found to be completely embedded in an extracellular matrix (ECM) produced by the chondrocytes. Importantly, no obvious inflammatory reaction was observed after in vivo implantation and homogeneous cartilage-like tissue was formed with biomechanical properties close to native tracheal cartilage at 4 weeks post-implantation. In the DI group, however, an obvious inflammatory reaction was observed within and around the cell-scaffold constructs at 1 week implantation and only sporadic cartilage islands separated by fibrous tissue were observed at 4 weeks. These results demonstrated that the post-implantation inflammatory reaction could be alleviated by in vitro precultivation, which contributes to the formation of satisfactory tubular cartilage for tracheal reconstruction.

Kinetics of contrail particles formation and heterogeneous reactions on such particles

Energy Technology Data Exchange (ETDEWEB)

Kogan, M.N.; Butkovsky, A.V.; Erofeev, A.I.; Freedlender, O.G.; Makashev, N.K. [Central Aerohydrodynamic Inst., Zhukovsky (Russian Federation)

1997-12-31

The research of impact of aircraft emissions upon the atmosphere is very complex and difficult problem. More than two decades of intensive investigations of the problem of ozone decay do not permit to make definite conclusions. Many important problems still remain unsolved in the aircraft/atmosphere interaction: engine, nozzle, jet, jet/vortex system interaction, vortex breakdown, contrail formation, meso-scale and global processes, their effects on climate. The particles formation and heterogeneous reactions play an important role in some of these processes. These problems are discussed. (author) 11 refs.

Kinetics of contrail particles formation and heterogeneous reactions on such particles

Energy Technology Data Exchange (ETDEWEB)

Kogan, M N; Butkovsky, A V; Erofeev, A I; Freedlender, O G; Makashev, N K [Central Aerohydrodynamic Inst., Zhukovsky (Russian Federation)

1998-12-31

The research of impact of aircraft emissions upon the atmosphere is very complex and difficult problem. More than two decades of intensive investigations of the problem of ozone decay do not permit to make definite conclusions. Many important problems still remain unsolved in the aircraft/atmosphere interaction: engine, nozzle, jet, jet/vortex system interaction, vortex breakdown, contrail formation, meso-scale and global processes, their effects on climate. The particles formation and heterogeneous reactions play an important role in some of these processes. These problems are discussed. (author) 11 refs.

2016 Milwaukee Engineering Research Conference | College of Engineering &

Science.gov (United States)