WorldWideScience

Sample records for raw tall oil

  1. Upgrading of raw tall oil soap into fuel oils and lubricants; Raakasuovan jalostus poltto- ja voiteluoeljyksi

    Energy Technology Data Exchange (ETDEWEB)

    Oasmaa, A; Arpiainen, V; McKeough, P; Tapola, E; Haekkinen, R; Kuoppala, E; Koskela, K [VTT Energy, Jyvaeskylae (Finland). Energy Production Technologies

    1997-12-01

    Thermochemical processing of tall oil soap originating from various mixtures of birch and pine has been experimentally investigated. The organic matter of tall oil soap, which is a by- product of Kraft pulping, originates mainly from wood extractives. Conventional processing of tall oil soap involves acidulation with sulphuric acid to yield crude tall oil and subsequent distillation of the oil at centralised refineries. Because tall oil originating from birch wood is far less valuable than that from pine, there is an economic incentive in the Nordic countries to develop alternative conversion processes for the tall oil soap produced at pulp mills where birch is widely used as feedstock. Furthermore, thermochemical processing of tall oil soap does not introduce sulphur into the chemical recovery cycle. This would be a significant advantage in future mills employing closure of water circuits and/or sulphur-free pulping. In small-scale experiments tall oil soaps from wood mixtures with high birch content have been processed using both liquid-phase thermal treatment and pyrolysis. The liquid-phase thermal treatment at 450 deg C under a nitrogen atmosphere yielded a good-quality oil product at high yield (about 50 % of the energy content of the tall oil soap). In the atmospheric pyrolysis of birch tall oil soap a separation of inorganic and organic constituents was obtained. The energy value of the product gases was high. Both processes are promising, but the pyrolysis alternative has the greater economic potential, providing that the promising preliminary experimental results have given a true picture of the performance of the full-scale pyrolysis process. (orig.)

  2. Uppgrading of raw tall oil soap into fuel oils and lubricants; Raakasuovan jalostus poltto- ja voiteluoeljyksi

    Energy Technology Data Exchange (ETDEWEB)

    Oasmaa, A.; Arpiainen, V.; McKeough, P.; Tapola, E. [VTT Energy, Espoo (Finland)

    1998-12-31

    Thermochemical processing of tall oil soap originating from various mixtures of birch and pine has been experimentally investigated. The organic matter of tall oil soap, which is a by-product of kraft pulping, originates mainly from wood extractives. Conventional processing of tall oil soap involves acidulation with sulphuric acid to yield crude tall oil and subsequent distillation of the oil at centralised refineries. Because tall oil originating from birch wood is far less valuable than that from pine, there is an economic incentive in the Nordic countries to develop alternative conversion processes for the tall oil soap produced at pulp mills where birch is widely used as feedstock. Furthermore, thermochemical processing of tall oil soap does not introduce sulphur into the chemical recovery cycle. This would be a significant advantage in future mills employing closure of water circuits and/or sulphur-free pulping. In small-scale experiments tall oil soaps from wood mixtures with high birch content have been processed using both liquid-phase thermal treatment and pyrolysis. The liquid-phase thermal treatment at 450 deg C under a nitrogen atmosphere yielded a good-quality oil product at high yield (about 50% of the energy content of the tall oil soap). In the atmospheric pyrolysis of birch tall oil soap a separation of inorganic and organic constituents was obtained. The energy value of the product gases was high. Both processes are promising, but the pyrolysis alternative has the greater economic potential, providing that the promising preliminary experimental results have given a true picture of the performance of the full-scale pyrolysis process. (orig.)

  3. Upgrading of raw tall oil soap into fuel oils and lubricants. Final report; Raakasuovan jalostus poltto- ja voiteluoeljyksi. Loppuraportti

    Energy Technology Data Exchange (ETDEWEB)

    Oasmaa, A.; Arpiainen, V.; McKeough, P.

    1997-12-31

    Thermochemical processing of tall oil soap originating from various mixtures of birch and pine has been experimentally investigated. The organic matter of tall oil soap, which is a by- product of Kraft pulping, originated mainly from wood extractives. Conventional processing of tall oil soap involves acidification with sulfuric acid to yield crude tall oil and subsequent distillation of the oil at centralized refineries. Because tall oil originating from birch wood is far less valuable than that from pine, there is an economic incentive in the Nordic Countries to develop alternative conversion processes for the tall oil soap produced at pulp mills where birch is widely used as feedstock. Furthermore, thermochemical processing of tall oil soap does not introduce sulfur into the chemical recovery cycle. This would be a significant advantage in future mills employing closure of water circuits and/or sulfur-free pulping. In small-scale experiments tall oil soaps from wood mixtures with high birch content have been processed using both liquid-phase thermal treatment and pyrolysis. The liquid-phase thermal treatment at 450 deg C under a nitrogen atmosphere yielded a good-quality oil product at high yield (about 50 % of the energy content of the tall oil soap). Also in the atmospheric pyrolysis of birch tall oil soap a separation of inorganic and organic constituents was obtained. The energy value of the product gases was high. Both processes are promising, but the pyrolysis alternative has the greater economic potential, providing that the promising preliminary experimental results have given a true picture of the performance of the full-scale pyrolysis process Bioenergy Research Programme; 3 refs., 3 figs.

  4. 21 CFR 186.1557 - Tall oil.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Tall oil. 186.1557 Section 186.1557 Food and Drugs... Substances Affirmed as GRAS § 186.1557 Tall oil. (a) Tall oil (CAS Reg. No. 8002-26-4) is essentially the sap... consists mainly of tall oil resin acids and tall oil fatty acids. (b) In accordance with § 186.1(b)(1), the...

  5. Wood-derived olefins by steam cracking of hydrodeoxygenated tall oils.

    Science.gov (United States)

    Pyl, Steven P; Dijkmans, Thomas; Antonykutty, Jinto M; Reyniers, Marie-Françoise; Harlin, Ali; Van Geem, Kevin M; Marin, Guy B

    2012-12-01

    Tall oil fractions obtained from Norwegian spruce pulping were hydrodeoxygenated (HDO) at pilot scale using a commercial NiMo hydrotreating catalyst. Comprehensive two dimensional gas chromatography (GC×GC) showed that HDO of both tall oil fatty acids (TOFA) and distilled tall oil (DTO) produced highly paraffinic hydrocarbon liquids. The hydrotreated fractions also contained fatty acid methyl esters and norabietane and norabietatriene isomers. Steam cracking of HDO-TOFA in a pilot plant revealed that high light olefin yields can be obtained, with 35.4 wt.% of ethene and 18.2 wt.% of propene at a coil outlet pressure (COP) of 1.7 bara, a dilution of 0.45 kg(steam)/kg(HDO-TOFA) and a coil outlet temperature (COT) of 820 °C. A pilot plant coking experiment indicated that cracking of HDO-TOFA at a COT of 850 °C results in limited fouling in the reactor. Co-cracking of HDO tall oil fractions with a typical fossil-based naphtha showed improved selectivity to desired light olefins, further demonstrating the potential of large scale olefin production from hydrotreated tall oil fractions in conventional crackers. Copyright © 2012 Elsevier Ltd. All rights reserved.

  6. 21 CFR 172.862 - Oleic acid derived from tall oil fatty acids.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Oleic acid derived from tall oil fatty acids. 172... FOOD FOR HUMAN CONSUMPTION Multipurpose Additives § 172.862 Oleic acid derived from tall oil fatty acids. The food additive oleic acid derived from tall oil fatty acids may be safely used in food and as...

  7. Alternative fuel properties of tall oil fatty acid methyl ester-diesel fuel blends

    Energy Technology Data Exchange (ETDEWEB)

    Altiparmak, D.; Keskin, A.; Koca, A. [Gazi University, Ankara (Turkey). Technical Education Faculty; Guru, M. [Gazi University, Ankara (Turkey). Engineering and Architectural Faculty

    2007-01-15

    In this experimental work, tall oil methyl ester-diesel fuel blends as alternative fuels for diesel engines were studied. Tall oil methyl ester was produced by reacting tall oil fatty acids with methyl alcohol under optimum conditions. The blends of tall oil methyl ester-diesel fuel were tested in a direct injection diesel engine at full load conditions. The effects of the new fuel blends on the engine performance and exhaust emission were tested. It was observed that the engine torque and power output with tall oil methyl ester-diesel fuel blends increased up to 6.1% and 5.9%, respectively. It was also seen that CO emissions decreased to 38.9% and NO{sub x} emissions increased up to 30% with the new fuel blends. The smoke capacity did not vary significantly. (author)

  8. Alternative fuel properties of tall oil fatty acid methyl ester-diesel fuel blends.

    Science.gov (United States)

    Altiparmak, Duran; Keskin, Ali; Koca, Atilla; Gürü, Metin

    2007-01-01

    In this experimental work, tall oil methyl ester-diesel fuel blends as alternative fuels for diesel engines were studied. Tall oil methyl ester was produced by reacting tall oil fatty acids with methyl alcohol under optimum conditions. The blends of tall oil methyl ester-diesel fuel were tested in a direct injection diesel engine at full load condition. The effects of the new fuel blends on the engine performance and exhaust emission were tested. It was observed that the engine torque and power output with tall oil methyl ester-diesel fuel blends increased up to 6.1% and 5.9%, respectively. It was also seen that CO emissions decreased to 38.9% and NO(x) emissions increased up to 30% with the new fuel blends. The smoke opacity did not vary significantly.

  9. Hydrogen solubility measurements of analyzed tall oil fractions and a solubility model

    International Nuclear Information System (INIS)

    Uusi-Kyyny, Petri; Pakkanen, Minna; Linnekoski, Juha; Alopaeus, Ville

    2017-01-01

    Highlights: • Hydrogen solubility was measured in four tall oil fractions between 373 and 597 K. • Continuous flow synthetic isothermal and isobaric method was used. • A Henry’s law model was developed for the distilled tall oil fractions. • The complex composition of the samples was analyzed and is presented. - Abstract: Knowledge of hydrogen solubility in tall oil fractions is important for designing hydrotreatment processes of these complex nonedible biobased materials. Unfortunately measurements of hydrogen solubility into these fractions are missing in the literature. This work reports hydrogen solubility measured in four tall oil fractions between 373 and 597 K and at pressures from 5 to 10 MPa. Three of the fractions were distilled tall oil fractions their resin acids contents are respectively 2, 20 and 23 in mass-%. Additionally one fraction was a crude tall oil (CTO) sample containing sterols as the main neutral fraction. Measurements were performed using a continuous flow synthetic isothermal and isobaric method based on the visual observation of the bubble point. Composition of the flow was changed step-wise for the bubble point composition determination. We assume that the tall oil fractions did not react during measurements, based on the composition analysis performed before and after the measurements. Additionally the densities of the fractions were measured at atmospheric pressure from 293.15 to 323.15 K. A Henry’s law model was developed for the distilled tall oil fractions describing the solubility with an absolute average deviation of 2.1%. Inputs of the solubility model are temperature, total pressure and the density of the oil at 323.15 K. The solubility of hydrogen in the CTO sample can be described with the developed model with an absolute average deviation of 3.4%. The solubility of hydrogen increases both with increasing pressure and/or increasing temperature. The more dense fractions of the tall oil exhibit lower hydrogen

  10. Conversion of tall oil soap and lignin into liquid fuels; Suovan ja ligniinin jalostaminen polttonesteiksi

    Energy Technology Data Exchange (ETDEWEB)

    Oasmaa, A.; McKeough, P. [VTT Energy, Espoo (Finland)

    1998-12-31

    The objective of the project was to evaluate the following upgrading processes for producing bio-oils for energy production: catalytic upgrading of kraft black liquor, thermal treatment of tall oil soap, and catalytic hydrotreatment of Milox-lignin. The best-quality product from black liquor was obtained by treating black liquor (20% moisture) at 420 deg C with an ammoniumheptamolybdate (AHM) catalyst under hydrogen for 60 minutes. The product was washed with water (product:water = 1:2) in order to remove the inorganics. The oil product contained 74% of the energy content of the black liquor organics. Regeneration of the AHM catalyst appears technically feasible. Raw tall oil soap cracks at 450 deg C under nitrogen into straight-chain hydrocarbons and naphthalene and phenanthrene derivatives. The best-quality oil product was obtained at a residence time of 60 - 120 minutes. This product contained no fatty acids as impurities. The process concept consists of two steps: heat treatment at 450 deg C and product separation. The energy yield of the hydrocarbon oil product is about 50%. The residue slurry (estimated energy content 20%) and gases (energy content 25%) are led to the recovery boiler. Milox lignin can be hydrotreated at 420 deg C (60 minutes) with a mixture (1:1) of sulphided NiMo- and Cr{sub 2}O{sub 3}-catalysts to a high-quality oil product (42 wt% yield of hexane solubles). The activity of catalysts decreased in order: sulphided NiMo/Al{sub 2}O{sub 3}:Cr{sub 2}O{sub 3} (1:1), sulphided NiMo/zeolite, NiMo/Al{sub 2}O{sub 3}, ATTM (no activity). A decrease in hydrogen partial pressure yielded a lower quality product. (orig.)

  11. 40 CFR 721.9672 - Amides, tall-oil fatty, N-[2-[2-hydroxyethyl)amino]ethyl], reaction products with sulfur dioxide...

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Amides, tall-oil fatty, N-[2-[2... Significant New Uses for Specific Chemical Substances § 721.9672 Amides, tall-oil fatty, N-[2-[2-hydroxyethyl... identified as amides, tall-oil fatty, N-[2-[2-hydroxyethyl)amino]ethyl], reaction products with sulfur...

  12. Gasification of tall oil soap for lime kiln fuel. Suovan kaasutus meesauunin polttoaineeksi

    Energy Technology Data Exchange (ETDEWEB)

    Saviharju, K.; McKeough, P.; Pyykkoenen, M.; Oasmaa, A. (Technical Research Centre of Finland, Espoo (Finland). Lab. of Fuel and Process Technology)

    1993-01-01

    The energy delivered to a modern pulp mill in the form of material unsuitable for fibre production exceeds the energy demand of the mill by about 30 %. Purchased lime kiln fuel further increases the surplus by 5-10 %. On the other hand, acidulation of tall oil soap adds about 1-3 kg SO[sub 2] for t of pulp onto the difficult-to-manage sulphur balance of the mill. Pyrolysis or gasification of tall oil soap could alleviate both these problems. In this study, gasification of tall oil soap was investigated in laboratory experiments as well as on a 200 kW test gasifier. In the laboratory experiments tall oil soap was pyrolyzed both on a heated-grid unit and on a thermobalance at heating rates of 600 K/s and 10 K/min, respectively. The maximum temperature was 675 deg C. The amount of volatiles formed was high, about 77 %, the amount of coke and inorganic salts being 7 % and 16 %, respectively. In the 200 kW gasifier, tests were carried out with mixed soap (pine and birch) such that the gas outlet temperature was 680-690 deg C. Because of the low gasification temperature complete gasification of the char was not achieved. The heat content of the product gas, including the sensible heat, was about 5.8 MJ/m[sup 3]n, which was estimated to be sufficient for lime calcination. Typical of the product gas were high tar content (20 g/m[sup 3]n), high acetylene content, and the absence of hydrogen sulphide. Overall, the results of this study indicated that the most significant subjects for future research are the atomization properties of tall oil soap, the effects of different amounts of input sodium on the operability of the lime kiln, and the economics of the proposed gasification process

  13. Conversion of tall oil soap and lignin into liquid fuels II; Suovan ja ligniinin jalostaminen polttonesteiksi II

    Energy Technology Data Exchange (ETDEWEB)

    Oasmaa, A.; McKeough, P. [VTT Energy, Espoo (Finland)

    1995-11-01

    The objective of the project was to evaluate the following upgrading processes for producing bio-oils for energy production: catalytic upgrading of kraft black liquor, thermal treatment of tall oil soap, and catalytic hydrotreatment of Milox-lignin. The best-quality product from black liquor was obtained by treating black liquor (20 % moisture) at 420 deg C with an ammoniumheptamolybdate (AHM) catalyst under hydrogen for 60 minutes.The product was washed with water (product:water = 1:2) in order to remove the inorganics. The oil product contained 74 % of the energy content of the black liquor organics. Regeneration of the AHM catalyst appears technically feasible. Raw tall oil soap cracks at 450 degr. C under nitrogen into straight-chain hydrocarbons and naphthalene and phenanthrene derivatives. The best-quality oil product was obtained at a residence time of 60 - 120 minutes. This product contained no fatty acids as impurities. The process concept consists of two steps: heat treatment at 450 degr. C and product separation. The energy yield of the hydrocarbon oil product is about 50 %. The residue slurry (estimated energy content 20 %) and gases (energy content 25 %) are led to the recovery boiler. Milox lignin can be hydrotreated at 420 deg C (60 minutes) with a mixture (1:1) of sulphided NiMo- and Cr{sub 2}O{sub 3}-catalysts to a high-quality oil product (42 wt% yield of hexane solubles). The activity of catalysts decreased in order: sulphided NiMo/Al{sub 2}O{sub 3}:Cr{sub 2}O{sub 3} (1:1), sulphided NiMo/zeolite, NiMo/Al{sub 2}O{sub 3}, ATTM (no activity). A decrease in hydrogen partial pressure yielded a lower quality product. (author)

  14. Usage of methyl ester of tall oil fatty acids and resinic acids as alternative diesel fuel

    International Nuclear Information System (INIS)

    Keskin, Ali; Yasar, Abdulkadir; Guerue, Metin; Altiparmak, Duran

    2010-01-01

    In the experimental study, tall oil fatty and resinic acids were investigated as alternative diesel fuels. The fatty acids, obtained by distilling the crude tall oil, were esterified with methanol in order to obtain tall oil methyl ester (biodiesel). Blends of the methyl ester, resinic acids and diesel fuel were prepared for test fuels. Performance and emission tests of the test fuels were carried out in an unmodified direct injection diesel engine on full load conditions. The results showed that the specific fuel consumption (SFC) with the blend fuels did not show a significant change. CO emission and smoke level decreased up to 23.91% and 19.40%, respectively. In general, NO x emissions showed on trend of increasing with the blend fuels (up to 25.42%). CO 2 emissions did not vary with the blend fuels significantly.

  15. Usage of methyl ester of tall oil fatty acids and resinic acids as alternative diesel fuel

    Energy Technology Data Exchange (ETDEWEB)

    Keskin, Ali; Yasar, Abdulkadir [Tarsus Technical Education Faculty, Mersin University, 33500 Mersin (Turkey); Guerue, Metin [Engineering and Architectural Faculty, Gazi University, 06570 Maltepe, Ankara (Turkey); Altiparmak, Duran [Technical Education Faculty, Gazi University, 06500 Ankara (Turkey)

    2010-12-15

    In the experimental study, tall oil fatty and resinic acids were investigated as alternative diesel fuels. The fatty acids, obtained by distilling the crude tall oil, were esterified with methanol in order to obtain tall oil methyl ester (biodiesel). Blends of the methyl ester, resinic acids and diesel fuel were prepared for test fuels. Performance and emission tests of the test fuels were carried out in an unmodified direct injection diesel engine on full load conditions. The results showed that the specific fuel consumption (SFC) with the blend fuels did not show a significant change. CO emission and smoke level decreased up to 23.91% and 19.40%, respectively. In general, NO{sub x} emissions showed on trend of increasing with the blend fuels (up to 25.42%). CO{sub 2} emissions did not vary with the blend fuels significantly. (author)

  16. Waste fatty acid addition to black liquor to decrease tall oil soap solubility and increase skimming efficiency in kraft mills pulping mountain pine beetle-infested wood

    Energy Technology Data Exchange (ETDEWEB)

    Uloth, V.; Guy, E. [FPInnovations, Prince George, BC (Canada). PAPRICAN Div.; Shewchuk, D. [Cariboo Pulp and Paper, Quesnel, BC (Canada); Van Heek, R. [Aker Kvaerner, Vancouver, BC (Canada)

    2009-07-01

    This paper presented the results of tests conducted to determine if the addition of waste fatty acids from vegetable oil processing might decrease tall oil soap solubility in pine-beetle impacted wood from British Columbia (BC). The soap recovery and tall oil production at BC mills has fallen by 30 to 40 percent in recent years due to the pulping of high proportions of grey-stage beetle-impacted wood. Full-scale mill tests were conducted over a 4-day period. The study showed that the addition of tall oil fatty acids or waste fatty acids from vegetable oil processing could decrease tall oil soap solubility and increase the soup skimming efficiency in mills pulping a large percentage of grey stage beetle-infested wood. The addition of fatty acids increased tall oil soap skimming efficiency from 50.2 percent in the baseline tests to 71.8 percent based on the total soap available, and from 76.7 percent in the baseline tests to 87.5 percent based on insoluble soap only. The economic analyses indicated that waste fatty acid addition could be economical when natural gas and oil prices are high. 4 tabs., 9 figs.

  17. Extraction of Phytosterols from Tall Oil Soap Using Selected Organic Solvents

    Czech Academy of Sciences Publication Activity Database

    Rousková, Milena; Heyberger, Aleš; Tříska, Jan; Krtička, M.

    2011-01-01

    Roč. 65, č. 6 (2011), s. 805-812 ISSN 0366-6352 R&D Projects: GA AV ČR 1QS400720504; GA MŠk(CZ) ED1.1.00/02.0073 Institutional research plan: CEZ:AV0Z40720504; CEZ:AV0Z60870520 Keywords : liquid - liquid extraction * tall oil soap * phytosterols Subject RIV: CI - Industrial Chemistry, Chemical Engineering Impact factor: 1.096, year: 2011

  18. 78 FR 76567 - Tall Oil, Polymer With Polyethylene Glycol and Succinic Anhydride Monopolyisobutylene Derivs...

    Science.gov (United States)

    2013-12-18

    ..., Polymer With Polyethylene Glycol and Succinic Anhydride Monopolyisobutylene Derivs.; Tolerance Exemption... an exemption from the requirement of a tolerance for residues of tall oil, polymer with polyethylene..., polymer with polyethylene glycol and succinic anhydride monopolyisobutylene derivs. on food or feed...

  19. Biodiesel production from tall oil with synthesized Mn and Ni based additives: effects of the additives on fuel consumption and emissions

    Energy Technology Data Exchange (ETDEWEB)

    Ali Keskin; Metin Guru; Duran Altiparmak [Mersin University, Mersin (Turkey). Technical Education Faculty

    2007-05-15

    In this study, biodiesel fuel and fuel additives were produced from crude tall oil that is a by-product in the pulp manufacturing by craft or sulphate pulping process. Fatty acids and resinic acids were obtained from crude tall oil by distillation method. Tall oil methyl ester (biodiesel) was produced from fatty acids. Resinic acids were reacted with NiO and MnO{sub 2} stoichiometrically for production of metallic fuel additives. Each metallic fuel additive was added at the rate of 8 {mu}mol/l and 12 {mu}mol/l to make mixtures of 60% tall oil methyl ester/40% diesel fuel (TE60) for preparing test fuels. Metallic fuel additives improved properties of biodiesel fuels, such as pour point and viscosity values. Biodiesel fuels were tested in an unmodified direct injection diesel engine at full load condition. Specific fuel consumption of biodiesel fuels increased by 6.00%, however, in comparison with TE60, it showed trend of decreasing with adding of additives. Exhaust emission profile of biodiesel fuels improved. CO emissions and smoke opacity decreased up to 64.28% and 30.91% respectively. Low NOx emission was also observed in general for the biodiesel fuels. 28 refs., 4 figs., 3 tabs.

  20. Gaschromatographic and mass spectroscopic investigations of tall oil rosin acids and diterpenioc compounds and modified diterpene acids

    International Nuclear Information System (INIS)

    Mayr, M.

    1984-12-01

    Diterpene resin acids are important constituents of the coniferous wood. The composition of these nonvolatile extractives have been studied by a number of investigations; both naturally occurring resins (oleoresin) and distillation products of the alkaline sulfate pulping process (tall oil) were analyzed. These mixtures find important uses in chemical intermediates, paper sizes, ester gums, coatings and numerous other applications. Owing to the more ameliorate physical properties a major part of tall oil resin acids is chemically modified and is used in intermediate chemicals. Such modifications are the disproportionation in the presence of certain catalysts and the formation of Diels-Alder adducts. The present study was undertaken to obtain detailed information of the overall composition of diterpenoid compounds and to achieve a separation of the complex natural and tall oil mixtures using high resolution glass capillary columns. Furthermore, one objective was to characterize the identified diterpene compounds and Diels-Alder adducts by relative retention values. Additionally the presence of some major adduct components in the modified samples was checked by comparison with pure specimens, independently synthesized or purified by crystallization and the mechanism of the Diels-Alder reaction was investigated. A compilation of the mass spectra of the substances detected in the different samples closes this work. (Author)

  1. Oil Extraction from “Morelos Rice” Bran: Kinetics and Raw Oil Stability

    Directory of Open Access Journals (Sweden)

    J. Zúñiga-Diaz

    2017-01-01

    Full Text Available “Morelos rice” is a variety of rice with certificate of denomination of origin. It is a large grain of opaque appearance and extra large size that is grown exclusively in Morelos state (Mexico. Thus, the quality and characteristics of its rice bran may affect the kinetic of the extraction process of its oil as well as its stability. Therefore, this work is oriented to determine the extraction kinetics of its oil and its oxidative stability. The latter one is obtained through the proposal of a method based on open-circuit potential measurements. The results showed that the rice bran has 21.44% of raw oil, with a chemical composition (based on fatty acids of 48.48% oleic acid, 35.26% linoleic acid, and 14.54% palmitic acid, as well as a free fatty acid content of 8.15%. A high percentage of its oil content can be recovered in a short time at room temperature, and its extraction kinetics is a function of both the washing and the diffusion of its oil. Under storage conditions the raw oil has a high stability, at least 8 months, and its oxidative stability was of 24, 9, and 7 hours at 50°C, 80°C, and 110°C, respectively.

  2. A burner for the combustion of spent tall oil soap

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, P.M.; Wong, J.K.; Moffatt, B.; Belanger, G. [Natural Resources Canada, Ottawa, ON (Canada). CANMET Energy Technology Centre; Soriano, D. [Brais Malouin and Associates, Montreal, PQ (Canada)

    2003-07-01

    Efficiency in industrial processes applies both to the form of energy involved and the many by-products resulting from the process. Tall oil soap (TOS) is a white frothy substance created during the pulping process. It contains chemicals that can be extracted for use in other industries. The processing of TOS results in a product called spent TOS. This study examined the incineration process to derive process heat from the calorific value in spent TOS. Brais Malouin and Associates (BMA) proposed that an atomizing nozzle should be used for use with this liquid in an incinerating burner. The efficiency of atomization of spent TOS with the BMA nozzle was determined by the Canada Centre for Mineral and Energy Technology (CANMET), which also characterized the combustion in a simulated boiler situation. The combustion tests were performed in the Pilot-Scale Research Boiler at the CANMET Energy Technology Centre (CETC). Pre-heating was done with a number 2 oil flame. Flame stability was determined by observing the flame through sight ports and by measuring the gas in the furnace. The experiments showed that spent TOS could successfully burn with a number 2 oil, in a proportion of 81 spent TOS to 19 oil mass ratio. As the amount of spent TOS was increased, the amount of sulphur dioxide, nitrogen oxide (NOx) and carbon monoxide decreased. The number 2 fuel oil was responsible for the sulphur dioxide in the exhaust. It is believed that the reduction in the carbon monoxide in the exhaust is attributable to the water-gas shift reaction. As the proportion of spent TOS increased, it was shown that the amount of NOx in the exhaust decreased rapidly. A bluish-green molten deposit formed in the furnace near the burner came from copper and manganese found in the ash of the spent TOS. 7 refs., 7 tabs., 16 figs.

  3. Identification of predominant aroma components of raw, dry roasted and oil roasted almonds.

    Science.gov (United States)

    Erten, Edibe S; Cadwallader, Keith R

    2017-02-15

    Volatile components of raw, dry roasted and oil roasted almonds were isolated by solvent extraction/solvent-assisted flavor evaporation and predominant aroma compounds identified by gas chromatography-olfactometry (GCO) and aroma extract dilutions analysis (AEDA). Selected odorants were quantitated by GC-mass spectrometry and odor-activity values (OAVs) determined. Results of AEDA indicated that 1-octen-3-one and acetic acid were important aroma compounds in raw almonds. Those predominant in dry roasted almonds were methional, 2- and 3-methylbutanal, 2-acetyl-1-pyrroline and 2,3-pentanedione; whereas, in oil roasted almonds 4-hydroxy-2,5-dimethyl-3(2H)-furanone, 2,3-pentanedione, methional and 2-acetyl-1-pyrroline were the predominant aroma compounds. Overall, oil roasted almonds contained a greater number and higher abundance of aroma compounds than either raw or dry roasted almonds. The results of this study demonstrate the importance of lipid-derived volatile compounds in raw almond aroma. Meanwhile, in dry and oil roasted almonds, the predominant aroma compounds were derived via the Maillard reaction, lipid degradation/oxidation and sugar degradation. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. Utilization of Liquid Smoke from Oil Palm Empty Fruit Bunches on Raw Rubber Processing

    Directory of Open Access Journals (Sweden)

    Hidayati Hidayati

    2011-06-01

    Full Text Available Research utilization of liquid smoke from oil palm empty fruit bunches of raw rubber has been made to utilize solid waste from industrial processing of oil palm empty fruit bunches of oil palm so that it becomes economically valuable products. This research has been done by pyrolysis of oil palm empty fruit bunches at a temperature of 400oC for 5, 6, 7 and 8 hours. The results show that the pyrolysis liquid smoke oil palm empty fruit bunches for 8 hours give a high concentration of phenol and acetic acid, respectively 5% and 0.454%. Liquid smoke that has been obtained is used as a coagulant in raw rubber plantation crops of the people residing in the village of Ambawang, Kubu Raya District, West Kalimantan. Results of treatment of liquid smoke on raw rubber  show that the rubber products that have been frozen and dried are superior in terms of color, smell and drying time compared with the treatment of formic acid and water battery which has been added so far on raw rubber by the local rubber farmers.

  5. Chromatography Analysis of Jatropha Curcas L Oil Raw and Refined

    International Nuclear Information System (INIS)

    Chitue de Assuncao Nascimento, Juliano; Lafargue Perez, Francisco; Diaz Velazquez, Manuel

    2013-01-01

    The chromatography of gases is one of the most versatile methods utilized in the chemical laboratory, which permits the determinations of the percentages and types of fatty acids present in vegetable oils. The objective of this work was to carry out a comparative study of the composition of the fatty acids, of the mechanically extracted oil from the seed of the Jatropha curcas L plant in the raw and refined state, using the data obtained by gas chromatography. The fatty acids of the oil were determined as methylic esteres. The analyst was carried out in a gas chromatographer, with a detector of ionization by way of flame (FID), Agilent 7890A (Agilent, USA) coupled to HP Pentium 4 computer, with a data processing program. The temperatures of the injector and of the detector were 250 °C and 260 °C respectively. The data obtained chromatographically of the oil of Jatropha curcas L, raw and refined indicates that the refinery process did not vary the composition of the fatty acid, because there are no significant differences between them. Also, the results obtained by other investigators, showed that the predominant fatty acids obtained from the oil of the Jatropha curcas L were palmitic and stearic in the saturated fatty acids, and oleic and linoleic in the unsaturated fatty acids

  6. Chromatography analysis of Jatropha Curcas L oil raw and refined

    International Nuclear Information System (INIS)

    Chitue de Assuncao Nascimento, Juliano; Lafargue Perez, Francisco; Diaz Velazquez, Manuel

    2013-01-01

    The chromatography of gases is one of the most versatile methods utilized in the chemical laboratory, which permits the determinations of the percentages and types of fatty acids present in vegetable oils. The objective of this work was to carry out a comparative study of the composition of the fatty acids, of the mechanically extracted oil from the seed of the Jatropha curcas L plant in the raw and refined state, using the data obtained by gas chromatography. The fatty acids of the oil were determined as methylic esteres. The analyst was carried out in a gas chromatographer, with a detector of ionization by way of flame (FID), Agilent 7890A (Agilent, USA) coupled to HP Pentium 4 computer, with a data processing program. The temperatures of the injector and of the detector were 250℃ and 260℃ respectively. The data obtained chromatographically of the oil of Jatropha curcas L, raw and refined indicates that the refinery process did not vary the composition of the fatty acid, because there are no significant differences between them. Also, the results obtained by other investigators, showed that the predominant fatty acids obtained from the oil of the Jatropha curcas L were palmitic and stearic in the saturated fatty acids, and oleic and linoleic in the unsaturated fatty acids

  7. A Numerical Comparison of Spray Combustion between Raw and Water-in-Oil Emulsified Fuel

    Directory of Open Access Journals (Sweden)

    D. Tarlet

    2010-03-01

    Full Text Available Heavy fuel-oils, used engine oils and animal fat can be used as dense, viscous combustibles within industrial boilers. Burning these combustibles in the form of an emulsion with water enables to decrease the flame length and the formation of carbonaceous residue, in comparison with raw combustibles. These effects are due to the secondary atomization among the spray, which is a consequence of the micro-explosion phenomenon. This phenomenon acts in a single emulsion droplet by the fast (< 0.1 ms vaporization of the inside water droplets, leading to complete disintegration of the whole emulsion droplet. First, the present work demonstrates a model of spray combustion of raw fuel. Secondly, the spray combustion of water-in-oil emulsified fuel is exposed to the same burning conditions, taking into account the micro-explosion phenomenon. Finally, the comparison between the results with and without second atomization shows some similar qualitative tendencies with experimental measurements from the literature.

  8. Characterization of raw materials and manufactured binderless particleboard from oil palm biomass

    International Nuclear Information System (INIS)

    Hashim, Rokiah; Nadhari, Wan Noor Aidawati Wan; Sulaiman, Othman; Kawamura, Fumio; Hiziroglu, Salim; Sato, Masatoshi; Sugimoto, Tomoko; Seng, Tay Guan; Tanaka, Ryohei

    2011-01-01

    The objective of this study was to examine the extractive, holocellulose, alpha cellulose, lignin, starch, and sugar contents of oil palm biomass and to evaluate its suitability in binderless particleboard production. In this study, bark, leaves, fronds, mid-parts and core-parts of the trunks were used to produce experimental binderless particleboard panels. Binderless particleboard panels were made with a target density of 0.80 g/cm 3 at a temperature of 180 o C and a pressure of 12 MPa in a computer controlled hot press. The modulus of rupture, the internal bond strength, the thickness swelling and the water absorption of the panels were evaluated. Fourier transform infrared spectroscopy and field emission scanning electron microscopy were used to characterize the properties of the raw materials and the manufactured panels. The chemical composition of the oil palm biomass consisted of high holocellulose, lignin, starch and sugar contents that have been found to aid in the production of binderless particleboard. The core-part of the trunk contained the highest amount of starch and total sugar. Samples made from the core-parts and fronds had sufficient modulus of rupture and internal bond strength to meet the Japanese Industrial Standard. The internal bond strength of the mid-part panels also met the standard. However, binderless board prepared from bark and leaves showed poor modulus of rupture and internal bond strength. Samples from the core-parts had the lowest thickness swell and water absorption but did not meet the above standard. The Fourier transform infrared spectroscopy spectra did not show any substantial difference between the raw materials and the manufactured panels. Field emission scanning electron microscopy indicated that the compressed cells varied between raw material types and showed the presence of compressed cells with some starch granules that facilitated adhesion. Based on the findings of this study, oil palm has the potential to be used to

  9. Raw Materials Market of China

    Directory of Open Access Journals (Sweden)

    Dmitry Alexandrovich Izotov

    2013-12-01

    Full Text Available Deficit of raw materials is becoming an important concern for the Chinese economy as it continues to grow. This deficit is amended with imports, which – in their own turn – are limited by the high level of global prices. The build-up issue of raw materials imports is going to solve by the measures of monetary policy (RMB’s revaluation against the USD. Analysis of China’s market of raw materials reveals that the largest increase in the physical volume of imports is concentrated in crude oil, LNG, iron ore and coal. As for Russia, its supplies and share in total Chinese imports of raw materials tend to increase. Author employs regression equations based on international statistics data to show that RMB’s revaluation, ceteris paribus, increases physical volumes of raw materials imports. However, the main factor of coal and LNG imports growth is energy consumption by Chinese heavy industry; imports of oil products – producers’ prices; meanwhile imports of steel products tend to decrease with the growth of steel exports. RMB’s revaluation increases physical volumes of imports of low value added raw materials from Russia (coal, crude oil, iron ore

  10. Effect of heat-treatment with raw cotton seed oil on decay resistance and dimensional stability of Beech (Fagus orientalis

    Directory of Open Access Journals (Sweden)

    مریم قربانی

    2015-05-01

    Full Text Available This research was conducted to determine the effect of heat-treatment with raw cotton seed oil on decay resistance and dimensional stability of beech according to EN113 and ASTM-D1037 standards respectively. The heat treatment with raw cotton seed oil was carried out in the cylinder at the temperatures of 130 and 170oC for 30 and 60 minutes. Oil uptake, density, volumetric swelling, water absorption and weight loss exposed to decay were measured. Oil uptake at 30 and 60 min were determined 10.5 and 13.3 Kg/cm3 respectively. Oil-heat treated samples at 30min and 130°C indicated the maximum density with 87.7% increase. According to results, oil-heat treatment improved water repellency and dimensional stability. Water absorption in 130°C and 60 minutes decreased 76% in comparison with control. Decay resistance of oil soaked samples for 60minutes was 80.2% more than control samples. Oil-heat treatment compared with oil treatment improved decay resistance, this effect was significant at 30 min. The temperature rise of oil–heat treatment at 30 minutes improved decay resistance, but the improvement under same level of temperature with increase time was not significant.

  11. Assessment of raw luffa as a natural hollow oleophilic fibrous sorbent for oil spill cleanup

    Directory of Open Access Journals (Sweden)

    Ola Abdelwahab

    2014-03-01

    Full Text Available Oil spills have a global concern due to its environmental and economical impact. Various commercial systems have been developed to control these spills, including the use of fibers as sorbents. However, plant biomass is renewable resource that can be converted into useful materials and energy. Luffa, an agricultural waste, was used as a sorbent material. The present study examines the adsorption capacity of raw luffa fibers for different types of oil and water pickup. The investigation revealed that the efficiency of fibers to remove crude oil from sea water was related to the surface properties of the fibers, concentration of the oil, amount of the fibers, as well as the temperature of the crude oil. The results show high sorption efficiency of luffa fibers for different kinds of oil. This sorbent also exhibited a good reusability since the decrease in sorption efficiency did not exceed 50% of the initial value after three sorption cycles.

  12. Emu Oil Reduces LPS-Induced Production of Nitric Oxide and TNF-α but not Phagocytosis in RAW 264 Macrophages.

    Science.gov (United States)

    Miyashita, Tadayoshi; Minami, Kazuhiro; Ito, Minoru; Koizumi, Ryosuke; Sagane, Yoshimasa; Watanabe, Toshihiro; Niwa, Koichi

    2018-04-01

    Emu is the second-largest extant bird native to Australia. Emu oil, obtained from the emu's fat deposits, is used as an ingredient in cosmetic skincare products. Emu oil has been reported to improve several inflammatory symptoms; however, the mechanisms of these anti-inflammatory effects are largely unknown. This study investigated the effects of emu oil on the inflammatory macrophage response in vitro. A murine macrophage cell line, RAW 264, was incubated in culture media supplemented with or without emu oil and stimulated with lipopolysaccharide (LPS). We determined phagocytic activity by measuring the number of fluorescent microspheres taken up by the cells. The phagocytic activity of RAW 264 cells in the presence of LPS was unaffected by emu oil. We also determined production of nitric oxide (NO) and tumor necrosis factor (TNF)-α in the culture medium using the Griess reaction and an enzyme-linked immunosorbent assay, respectively, and the protein expression of inducible NO synthase (iNOS) using western blotting. The results indicated that emu oil reduced the LPS-induced production of NO, TNF-α, and iNOS expression in a dose-dependent manner. The results suggested that emu oil does not reduce the phagocytic clearance rate of inflammatory matter; however, it does reduce the production of NO and TNF-α in macrophages. These latter products enhance the inflammatory response and emu oil thereby demonstrated anti-inflammatory properties.

  13. American Hyperbole: The Tall Tale.

    Science.gov (United States)

    Pavonetti, Linda M.; Combs, Christine M.

    1999-01-01

    Discusses the historic derivation and the format and characteristics of traditional tall tales, and modern adaptations of these stories. Describes a selection of tall tales for modern young adult readers; notes titles and authors of original tall tales and those with female heroes. Discusses the enduring appeal of traditional and modern tall…

  14. Modular-block complex on preparation and processing of oil slurry, spilled and raw petroleum

    International Nuclear Information System (INIS)

    Pak, V.V.

    1999-01-01

    The use of non-serial small petroleum equipment for development of remote and low output petroleum deposit, collection and processing of spilled petroleum is urgent issue. Joint-stock company Montazhengineering developed and mastered production of small modular-block complexes for preparation and processing of petroleum. The complex can include the following modules: preparation of raw petroleum for getting commodity petroleum; petroleum processing installation for getting gas, diesel fuel and black oil; installation for refining of nafta; installation for cleaning petroleum products from mercaptans; installation for getting basic oil; installation for getting bitumen and mastic; installation for processing of spilled petroleum and oil slurry. Each of modules can work separately and in various combinations depending on input and necessary assortment of commodity petroleum. One of urgent ecological problem in Kazakhstan petroleum-processing regions is large number barns with spilled petroleum and oil slurry. Their processing will allow to solve the ecological and economical problems. Processing of spilled petroleum and oil slurry in developed installations it's possible to get commodity petroleum and petroleum products

  15. Lipid oxidation and volatile production in irradiated raw pork batters prepared with commercial soybean oil containing vitamin E

    Energy Technology Data Exchange (ETDEWEB)

    Jo, Cheorun; Ahn, D.U.; Byun, M.W. E-mail: mwbyun@kaeri.re.kr

    2001-04-01

    An emulsion-type raw pork batter was prepared using 10% (meat weight) of backfat or commercial soybean oil enriched with vitamin E to determine the effect of irradiation on lipid oxidation and volatile production during storage. Batters (approximately 100 g) were vacuum- or aerobically packaged and irradiated at 0, 2.5 or 4.5 kGy. Irradiation increased lipid oxidation of aerobically packaged raw pork batters prepared with both backfat and soybean oil. Lipid oxidation of vacuum-packaged pork batters was not influenced by irradiation except for the batter prepared with backfat at day 0. Aerobically packaged batters prepared with soybean oil had lower (P<0.05) TBARS than that with backfat, but vacuum-packaged ones were not different. The sum of volatile compounds with short retention time (<1.80) increased by irradiation, and with storage time except for aerobic packaging at day 7. The amount of total volatile compounds had an increasing trend until day 3, but not at day 7. Irradiation increased the production of total volatile compounds in the batters prepared with soybean oil and vacuum packaged, but irradiation effect on volatile production was not consistent with other treatments.

  16. Lipid oxidation and volatile production in irradiated raw pork batters prepared with commercial soybean oil containing vitamin E

    International Nuclear Information System (INIS)

    Jo, Cheorun; Ahn, D.U.; Byun, M.W.

    2001-01-01

    An emulsion-type raw pork batter was prepared using 10% (meat weight) of backfat or commercial soybean oil enriched with vitamin E to determine the effect of irradiation on lipid oxidation and volatile production during storage. Batters (approximately 100 g) were vacuum- or aerobically packaged and irradiated at 0, 2.5 or 4.5 kGy. Irradiation increased lipid oxidation of aerobically packaged raw pork batters prepared with both backfat and soybean oil. Lipid oxidation of vacuum-packaged pork batters was not influenced by irradiation except for the batter prepared with backfat at day 0. Aerobically packaged batters prepared with soybean oil had lower (P<0.05) TBARS than that with backfat, but vacuum-packaged ones were not different. The sum of volatile compounds with short retention time (<1.80) increased by irradiation, and with storage time except for aerobic packaging at day 7. The amount of total volatile compounds had an increasing trend until day 3, but not at day 7. Irradiation increased the production of total volatile compounds in the batters prepared with soybean oil and vacuum packaged, but irradiation effect on volatile production was not consistent with other treatments

  17. Improvement of the quality of wood derived biofuel-oils; Puuperaeisten biopolttooeljyjen laadun parantaminen. Raakasuovan terminen nestefaasikaesittely hiilivety-polttoaineiksi

    Energy Technology Data Exchange (ETDEWEB)

    Oasmaa, A.; McKeough, P.; Kuoppala, E.; Kylloenen, H.; Levander, J.; Tapola, E.; Haekkinen, R.

    1995-12-31

    Liquid-phase thermochemical processing of tall oil soap has been experimentally investigated. The organic matter of tall oil soap, which is a by-product of kraft pulping, originates mainly from wood extractives. Conventional processing of tall oil soap involves acidulation to yield crude tall oil and subsequent distillation of the oil at centralized refineries. Because tall oil originating from birch wood is far less valuable than that from pine, there is an economic incentive in the Nordic countries to develop alternative conversion processes for the tall oil soap produced at pulp mills where birch is widely used as feedstock. Both catalytic hydrotreatment and liquid-phase thermal treatment of a mixed pine/birch soap have been investigated in the laboratory. Liquid and gaseous hydrocarbons were the principal products formed in both types of treatment. Although the liquid product formed under hydrotreatment conditions contained a higher proportion of aliphatic compounds, it was clear that the thermal treatment process would be, economically, the more favorable option. In the thermal process, a predominantly hydrocarbon oil product was obtained at 450 deg C using a residence time of at least 60 min. About 50 % of the energy content of the tall oil soap was recovered as oil product, about 30 % as gases, and about 20 % as organic material contained in an aqueous slurry phase. When the oil product was carefully separated from the aqueous slurry phase, only trace amounts of impurities, such as water, sodium and organic acid salts were present in the product. A techno-economic evaluation of the process concept has been performed. The economics of the thermal treatment process appear to be favorable in comparison with those of the conventional acidulation process

  18. Improvement of the quality of wood derived biofuel-oils; Puuperaeisten biopolttooeljyjen laadun parantaminen. Raakasuovan terminen nestefaasikaesittely hiilivety-polttoaineiksi

    Energy Technology Data Exchange (ETDEWEB)

    Oasmaa, A; McKeough, P; Kuoppala, E; Kylloenen, H; Levander, J; Tapola, E; Haekkinen, R

    1996-12-31

    Liquid-phase thermochemical processing of tall oil soap has been experimentally investigated. The organic matter of tall oil soap, which is a by-product of kraft pulping, originates mainly from wood extractives. Conventional processing of tall oil soap involves acidulation to yield crude tall oil and subsequent distillation of the oil at centralized refineries. Because tall oil originating from birch wood is far less valuable than that from pine, there is an economic incentive in the Nordic countries to develop alternative conversion processes for the tall oil soap produced at pulp mills where birch is widely used as feedstock. Both catalytic hydrotreatment and liquid-phase thermal treatment of a mixed pine/birch soap have been investigated in the laboratory. Liquid and gaseous hydrocarbons were the principal products formed in both types of treatment. Although the liquid product formed under hydrotreatment conditions contained a higher proportion of aliphatic compounds, it was clear that the thermal treatment process would be, economically, the more favorable option. In the thermal process, a predominantly hydrocarbon oil product was obtained at 450 deg C using a residence time of at least 60 min. About 50 % of the energy content of the tall oil soap was recovered as oil product, about 30 % as gases, and about 20 % as organic material contained in an aqueous slurry phase. When the oil product was carefully separated from the aqueous slurry phase, only trace amounts of impurities, such as water, sodium and organic acid salts were present in the product. A techno-economic evaluation of the process concept has been performed. The economics of the thermal treatment process appear to be favorable in comparison with those of the conventional acidulation process

  19. Tall oil fatty acid inclusion in the diet improves performance and increases ileal density of lactobacilli in broiler chickens.

    Science.gov (United States)

    Vienola, K; Jurgens, G; Vuorenmaa, J; Apajalahti, J

    2018-04-20

    1. Studies were conducted with tall oil fatty acids (TOFA) to determine their effect on broiler chicken performance and ileal microbiota. TOFA, a product originating from coniferous trees and recovered by fractional distillation of side-streams from pulp production, mainly comprises free long-chain fatty acids (~90%) and resin acids (~8%). Conjugated linolenic acids and pinolenic acid are characteristic fatty acid components of TOFA. 2. TOFA products at 750 mg/kg feed were tested in two 35-day broiler chicken trials, each using a wheat soya-based diet and with 12 replicate pens per treatment. In both trials, TOFA improved body weight gain at all time points (P TOFA formulations (silica carrier and palm oil coating) were tested and showed performance effects similar to liquid TOFA. 3. Ileal digesta of the broiler chickens was analysed for total eubacteria, Lactobacillus spp., Enterococcus spp., Escherichia coli and Clostridium perfringens on days 14 and 35. TOFA significantly increased total eubacteria and lactobacilli density on day 14 (P TOFA (P 250 mg/l. The in vitro results were thus in line with in vivo observations. 5. The mechanisms behind the bacterial shifts and their role in performance improvement are unknown. Further purification of TOFA components is needed to identify the effective agents.

  20. Raw material uranium

    International Nuclear Information System (INIS)

    Arnold, O.

    1975-01-01

    In this paper some aspects are being considered, in as far as they can contribute to a better understanding of uranium as a raw material and an energy carrier, and as they can indicate the possible ways and means open to the German Federal Republic for securing this highly desirable raw material, without becoming even more dependent on the economic and political views of the producing countries, than it is the case in respect of oil. (orig.) [de

  1. Tall-Building Projects Sustainability Indicator (TPSI: A New Design and Environmental Assessment Tool for Tall Buildings

    Directory of Open Access Journals (Sweden)

    Hasim Altan

    2012-04-01

    Full Text Available The paper presents the features of Tall-building Projects Sustainability Indicator (TPSI—a “Sustainability Rating System” that specializes in tall-building projects. The system comprises two components; the “Technical Manual” in the form of a booklet and the “Calculator” in the form of an Excel tool. It can be used as a “design tool” and/or as a “checklist” to compare and to improve the sustainable performance of tall-building design schemes. At the same time, the system can be used to evaluate the sustainability of existing tall-building projects. The first version of the TPSI rating system (TPSI 2012 Version was released as an online tool (GreenLight and thoroughly examined and validated by multiple parties.

  2. Simultaneous treatment of raw palm oil mill effluent and biodegradation of palm fiber in a high-rate CSTR.

    Science.gov (United States)

    Khemkhao, Maneerat; Techkarnjanaruk, Somkiet; Phalakornkule, Chantaraporn

    2015-02-01

    A high-rate continuous stirred tank reactor (CSTR) was used to produce biogas from raw palm oil mill effluent (POME) at 55°C at a highest organic loading rate (OLR) of 19 g COD/ld. Physical and chemical pretreatments were not performed on the raw POME. In order to promote retention of suspended solids, the CSTR was installed with a deflector at its upper section. The average methane yield was 0.27 l/g COD, and the biogas production rate per reactor volume was 6.23 l/l d, and the tCOD removal efficiency was 82%. The hydrolysis rate of cellulose, hemicelluloses and lignin was 6.7, 3.0 and 1.9 g/d, respectively. The results of denaturing gradient gel electrophoresis (DGGE) suggested that the dominant hydrolytic bacteria responsible for the biodegradation of the palm fiber and residual oil were Clostridium sp., while the dominant methanogens were Methanothermobacter sp. Copyright © 2014 Elsevier Ltd. All rights reserved.

  3. Impact of tall buildings in environmental pollution

    Directory of Open Access Journals (Sweden)

    H. Hayati

    2012-03-01

    Full Text Available Today, tall building is a phenomenon that the world particularly large cities are facing. The tall buildings in order to exploit the land with having the negative affects in the environment create new problems including increasing congestion population, environmental pollution, reduce citizen access to fresh air and sunlight. However, regarding to population increasing and land shortage, tall buildings could not be avoided. This paper investigates the relationship of tall buildings with urban air pollution as well as the possible reducing of negative affects of tall building on environmental pollution with respect to geographical position, technicalrules, immunization, green space, direct of wind, appropriate distance to other buildings, design in terms of visibility and landscape and urban appearance were reviewed. The study showed that the tall buildings cause increasing the air pollution in large urban area due to changing in wind and its direction and also congestion of tall buildings as a pollution sources. Therefore some techniques to design the tall building must be considered to reduce the negative affects of the tall buildings on environmental pollution. Unfortunately the lack of the construction roles in term of environmental protection and also control of the rules in construction process causing the environmental pollution particularly air pollution. It is suggested that the re-evaluate of the rules with restricted control can improve the air quality in the large cities and also utilization of green spaces in floors and roofs of buildings as environmentally friendly buildings which are attempt to reduce environmental problems.

  4. TALL-FORB COMMUNITIES OF THE NORTH ALTAI

    Directory of Open Access Journals (Sweden)

    N. ERMAKOV

    2003-06-01

    Full Text Available Classification of tall-forb vegetation of the Altai using the Braun-Blanquet approach was carried out on the basis of a wide ranging set o[ data from different altitudinal belts. Three main phytosociological types of the tall-forb communities were distinguished within the class MulgedioAconitetea, order Tmllio - Crepidetalia due to performed syntaxonomic analysis. The thermophilous tall-forb communities occurring in the subnemoral belt at altitudes of 259-700 m were included in the alliance Cacalio hastatae - Aconition septentrionalis all. nova. The montain tall-forb meadows of the dark-coniferous taiga belt (altitudes of 800-1700 m were included in the alliance Triseto sibiricae-Aconirlon septentrionalis all. prov. The moderately cryophilous subalpine tall-forb communities widespread at the upper boundary of the forest belt at altitudes of 1000-1900 m were included in the alliance Rhaponticion carthamoidis. Altaian tall-forb vegetation shows a distinct phytosociological and plant geographical unity with European subalpine communities but the closeness of the floristic relations varies in certain altitudinal groups. Most thermophilous tall-forb Siberian meadows of the alliance Cacalio-Aconition which occur at lower altitudes demonstrate strong plant geographical relations with North and Central European meadows of the Adenostyletalia. Gradual decrease of the European floristic relations in the Altaian tall-forb meadows at higher altitudes is shown.

  5. Use of weathered diesel oil as a low-cost raw material for biosurfactant production

    Directory of Open Access Journals (Sweden)

    A. P. Mariano

    2008-06-01

    Full Text Available This work aimed to investigate the capability of biosurfactant production by Staphylococcus hominis, Kocuria palustris and Pseudomonas aeruginosa LBI, using weathered diesel oil from a long-standing spillage as raw material. The effect of the culture media (Robert or Bushnell-Haas and of the carbon source (spilled diesel oil or commercial diesel oil on biosurfactant production was evaluated. Erlenmeyer flasks (250 mL containing the cell broth were agitated (240 rpm for 144 h at 27±2ºC. Biosurfactant production was monitored according to the De Nöuy ring method using a Krüss K6 tensiometer. Considering the possibility of intracellular storage of biosurfactant in the cell wall of the cultures S. hominis and K. palustris, experiments were also done applying ultrasound as a way to rupture the cells. For the conditions studied, the cultures did not indicate production of biosurfactants. Results obtained with a hydrocarbon biodegradability test based on the redox indicator 2,6-dichlorophenol indophenol showed that only the commercial diesel was biodegraded by the cultures.

  6. Microbial production of raw starch digesting enzymes | Sun | African ...

    African Journals Online (AJOL)

    Raw starch digesting enzymes refer to enzymes that can act directly on raw starch granules below the gelatinization temperature of starch. With the view of energy-saving, a worldwide interest has been focused on raw starch digesting enzymes in recent years, especially since the oil crisis of 1973. Raw starch digesting ...

  7. Genotypic evaluation of tall fescue dihaploids by capillary electrophoresis

    Science.gov (United States)

    Recent innovations in tall fescue breeding and selection allow for the generation of dihaploid tall fescue lines. During the dihaploid generation process, two possible products can be generated. These being tall fescue hybrids generated from outcrossing and homozygous dihaploid tall fescue lines. As...

  8. Significance of Cooking Oil to Bioaccessibility of Dichlorodiphenyltrichloroethanes (DDTs) and Polybrominated Diphenyl Ethers (PBDEs) in Raw and Cooked Fish: Implications for Human Health Risk.

    Science.gov (United States)

    Mi, Xiu-Bo; Su, Yang; Bao, Lian-Jun; Tao, Shu; Zeng, Eddy Y

    2017-04-26

    The present study examined the bioacessibility of DDTs and PBDEs in cooked fish (yellow grouper; Epinephelus awoara) with and without heating using the colon extended physiologically based extraction test. The bioaccessibility of DDTs and PBDEs increased from 60 and 26% in raw fish to 83 and 63%, respectively, after the addition of oil to raw fish. However, they decreased from 83 to 66% and from 63 to 40%, respectively, when oil-added fish were cooked. Human health risk assessment based on bioaccessible concentrations of DDTs and PBDEs in fish showed that the maximum allowable daily fish consumption rates decreased from 25, 59, and 86 g day -1 to 22, 53, and 77 g day -1 for children, youths, and adults, respectively, after fish were cooked with oil. These findings indicated that the significance of cooking oil to the bioaccessibility of DDTs and PBDEs in food should be considered in assessments of human health risk.

  9. Air Permitting Implications of a Biorefinery Producing Raw Bio-Oil in Comparison with Producing Gasoline and Diesel Blendstocks

    Energy Technology Data Exchange (ETDEWEB)

    Bhatt, Arpit H [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Yi Min [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-02-01

    A biorefinery, considered a chemical process plant under the Clean Air Act permitting program, could be classified as a major or minor source based on the size of the facility and magnitude of regulated pollutants emitted. Our previous analysis indicates that a biorefinery using fast pyrolysis conversion process to produce finished gasoline and diesel blendstocks with a capacity of processing 2,000 dry metric tons of biomass per day would likely be classified as a major source because several regulated pollutants (such as particulate matter, sulfur dioxide, nitrogen oxide) are estimated to exceed the 100 tons per year (tpy) major source threshold, applicable to chemical process plants. Being subject to a major source classification could pose additional challenges associated with obtaining an air permit in a timely manner before the biorefinery can start its construction. Recent developments propose an alternative approach to utilize bio-oil produced via the fast pyrolysis conversion process by shipping it to an existing petroleum refinery, where the raw bio-oil can be blended with petroleum-based feedstocks (e.g., vacuum gas oil) to produce gasoline and diesel blendstocks with renewable content. Without having to hydro-treat raw bio-oil, a biorefinery is likely to reduce its potential-to-emit to below the 100 tpy major source threshold, and therefore expedite its permitting process. We compare the PTE estimates for the two biorefinery designs with and without hydrotreating of bio-oils and examine the air permitting implications on potential air permit classification and discuss the best available control technology requirements for the major source biorefinery utilizing hydrotreating operation. Our analysis is expected to provide useful information to new biofuel project developers to identify opportunities to overcome challenges associated with air permitting.

  10. To be or not to be "TALL"?

    Science.gov (United States)

    Laron, Zvi

    2012-08-01

    Constitutional tall stature can be anticipated from neonatal length (1) and measurement at age 4 and 8 years (2). Mainly of genetic origin (3) it has been shown that tall children and parents have high normal or higher than normal serum hGH and/or IGF-I levels. (4-6). Also in a healthy adult population a significant (pgigantism" due to excessive GHR-H or hGH secretion (8, 9) and other pathological conditions leading to tall stature (3).

  11. Raw material supply: challenge and chance for economy and state

    Energy Technology Data Exchange (ETDEWEB)

    Casper, W

    1976-01-01

    The imprint left by the 1973 oil embargo makes all nations aware of their dependence upon this and other raw materials. The author says the brunt of the embargo has dealt a heavier blow than has been realized on industrial nations and developing countries alike. The drastic decline of raw material prices has had threatening consequences for a number of raw-material-producing developing countries, making some nations unite for the purpose of market regulation. The cartel-like union of copper-producing countries is cited; producers of bauxite, iron ore, and tungsten have united; and some producers of tin have united. So far, the attempt to apply the oil strategy to other raw materials has not achieved the desired results; however, raw materials are no longer just a phase of the industrial process but have become a political matter of prime importance. (MCW)

  12. Trends, Opportunities, and Challenges for Tall Wind Turbine and Tower Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Lantz, Eric; Roberts, Owen; Dykes, Katherine

    2017-06-28

    This presentation summarizes recent analysis focused on characterizing the opportunity for Tall Wind technologies generally and for tall tower technologies specifically. It seeks to illuminate and explain the concept of Tall Wind, its impact on the wind industry to date, and the potential value of Tall Wind in the future. It also explores the conditions and locations under which the impacts of Tall Wind offer the most significant potential to increase wind technology performance. In addition, it seeks to examine the status of tall tower technology as a key sub-component of Tall Wind, focusing on the potential for continued innovation in tubular steel wind turbine towers and the status and potential for a select set of alternative tall tower technologies.

  13. Application of biotechnology in genetics and breeding of tall fescue

    International Nuclear Information System (INIS)

    Huang Xin; Ye Hongxia; Shu Xiaoli; Wu Dianxing

    2008-01-01

    Tall fescue (Festuca arundinacea Schred.) is an important lawn and pasture grass in agriculture, animal husbandy and lawn industry. The historical and present situations of tall fescue breeding were briefly introduced, and advances in the researches of molecular biology and germplasm enhancement by biotechnology in tall fescue were reviewed in the paper, which would provide the references for tall fescue breeding by biotechnology. (authors)

  14. Safe and Sustainable Tall Buildings - State of the Art

    Directory of Open Access Journals (Sweden)

    Mendis P.

    2012-01-01

    Full Text Available Tall buildings are becoming very popular around the world. Asia will have most of the tall buildings in this century. Both safety and sustainability aspects are important in planning and designing these buildings. The design and construction of tall buildings present many challenges for the design team, from engineers, architect through to the builder. Although structural systems could be developed and construction solutions could be found to design and construct very tall buildings in excess of 1 km (even 1 mile, other aspects such as fire and egress, long-term movements, environmental wind and perception of motion (including damping for dynamic effects, transportation (lifts issues, sustainability, durability and maintenance will govern and may even restrict the heights. Current practices and important issues related to design of safe and sustainable design of tall buildings are discussed in this paper.

  15. Mineral raw materials for power production in legislation of the Republic of Croatia

    International Nuclear Information System (INIS)

    Matisa, Z.

    1999-01-01

    According to the Constitution of the Republic of Croatia, mineral wealth is a public good of legal interest to the Republic of Croatia and enjoys its special protection. The Mining Law establishes that mineral wealth (including mineral resources that are used for power production) is the property of the Republic of Croatia. Among other mineral raw materials, this refers to mineral raw materials that are used for power production: coal, oil, natural gas, radioactive mineral raw materials and geothermal waters. These mineral resources are as almost all other mineral raw materials with the exception of geothermal waters, an unrecoverable natural resource. The right to use that natural resource may be granted only by a concession. The mining legislation provides for exploration and exploitation of mineral raw materials. Exploration of oil and gas is considered to comprise operations and testing with the aim to establish the existence, position and form of oil and natural gas deposits, their quality and quantity, as well as exploitation conditions. Exploitation of oil and natural gas is considered to comprise extraction from deposits, refining and transport, as well as disposal in geological structures. Mineral raw materials used in power production amount to 63% of national total primary energy production, and they cover 33% of total power consumption in the country. Legislation in the Republic of Croatia, which refers to exploration and exploitation of oil and natural gas, allows economic utilization of that unrecoverable natural wealth to run smoothly and in compliance with practices in our European environment. (author)

  16. Effect of fruit set on fructification of coconut tall ecotypes for ...

    African Journals Online (AJOL)

    To assess the effect of coconut fruit set on the variation expression of the number of nuts yielded at the end of the fructification, a modelling approach was used. Four female parents namely Kar Kar Tall (KKT), Kappadam Tall (KPD), Sri Lanka Tall (SLT) and Vanuatu Tall (VTT) as well as four male parents known as Panama ...

  17. Analysis of the possibility for obtaining oil from the spend coffee grounds as potential raw material for biodiesel production

    Directory of Open Access Journals (Sweden)

    Iličković Zoran

    2012-01-01

    Full Text Available The aim of this paper was to investigate the possibility of obtaining oil from spent coffee grounds, which are left behind after the coffee is prepared, as the potential feedstock for biodiesel production. The effect of process parameters, such as are the type of solvent, the ratio of spent coffee grounds/solvent and the extraction time on oil yielded from coffee grounds was examined. The oil was obtained by maceration and extraction in the Soxhlet apparatus. The obtain results show that the spent coffee grounds could be used as an alternative raw material for biodiesel production, because it contains a significant amount of oil that can be extracted. The oil yield depends on the extraction (maceration process parameters. The maximum oil yield obtained by the Soxhlet extraction with the n-hexane for the period of 5 h was 11.85% (the weight percentage of oil on dry mater, whereas with petroleum ether the oil yield was slightly lower and amounted to 10.44%. The yield of the oil extracted by maceration increases with the decrease of spent coffee grounds/solvent ratio from 1/3 to 1/7 g/cm3, and other parameters being constant. The oil yield increases with the duration of the maceration. Greater oil yield, ranging from 3 to 8.5%, can be obtained with n-hexane compared to the extraction with petroleum ether. Furthermore, n-hexane is less volatile and flammable, compared to petroleum ether, so it is more convenient to use.

  18. Conversion characteristics of 10 selected oil shales

    Energy Technology Data Exchange (ETDEWEB)

    Miknis, F.P.

    1989-08-01

    The conversion behavior of 10 oil shale from seven foreign and three domestic deposits has been studied by combining solid- and liquid-state nuclear magnetic resonance (NMR) measurements with material balance Fischer assay conversion data. The extent of aromatization of aliphatic carbons was determined. Between zero and 42% of the raw shale aliphatic carbon formed aromatic carbon during Fischer assay. For three of the shales, there was more aromatic carbon in the residue after Fisher assay than in the raw shale. Between 10 and 20% of the raw shale aliphatic carbons ended up as aliphatic carbons on the spent shale. Good correlations were found between the raw shale aliphatic carbon and carbon in the oil and between the raw shale aromatic carbon and aromatic carbon on the spent shale. Simulated distillations and molecular weight determinations were performed on the shale oils. Greater than 50% of the oil consisted of the atmospheric and vacuum gas oil boiling fractions. 14 refs., 15 figs., 1 tab.

  19. TALL-HERB BOREAL FORESTS ON NORTH URAL

    Directory of Open Access Journals (Sweden)

    A. A. Aleinikov

    2016-09-01

    Full Text Available Background. One of the pressing aims of today’s natural resource management is its re-orientation to preserving and restoring ecological functions of ecosystems, among which the function of biodiversity maintenance plays an indicator role. The majority of today’s forests have not retained their natural appearance as the result of long-standing human impact. In this connection, refugia studies are becoming particularly interesting, as they give us an insight into the natural appearance of forests. Materials and methods. Studies were performed in dark conifer forests of the Pechora–Ilych reserve, in the lower reaches of the Bol’shaya Porozhnyaya River in 2013 yr. Vegetation data sampling was done at 50 temporary square plots of a fixed size (100 m2 randomly placed within a forest type. A list of plant species with species abundance was made for each forest layer. The overstorey (or tree canopy layer was denoted by the Latin letter A. The understorey layer (indicated by the letter B included tree undergrowth and tall shrubs. Ground vegetation was subdivided into the layers C and D. Layer C (field layer comprised the herbaceous species (herbs, grasses, sedges and dwarf shrubs together with low shrubs, tree and shrub seedlings. The height of the field layer was defined by the maximal height of the herbaceous species, ferns, and dwarf shrubs; the height varied from several cm to more than 200 cm in the ‘tall-herb’ forest types. Layer D (bottom layer included cryptogamic species (bryophytes and lichens. Species abundance in the each layer was usually assessed using the Braun-Blanquet cover scale (Braun-Blanquet 1928. The nomenclature used follows Cherepanov’s (1995 for vascular plants, and Ignatov & Afonina’s (1992. Results. The present article contains descriptions of unique tall-herb boreal forests of European Russia preserved in certain refugia which did not experience prolonged anthropogenic impact or any other catastrophes

  20. Tall Buildings Initiative

    Science.gov (United States)

    Initiative 2017 TBI Guidelines Version 2.03 Now Available Screen Shot 2017-10-10 at 3.05.10 PM PEER has just initiative to develop design criteria that will ensure safe and usable tall buildings following future earthquakes. Download the primary product of this initiative: Guidelines for Performance-Based Seismic Design

  1. Essential oils of thyme and Rosemary in the control of Listeria monocytogenes in raw beef

    Directory of Open Access Journals (Sweden)

    Maíra Maciel Mattos de Oliveira

    2013-12-01

    Full Text Available This study was developed in order to evaluate two alternatives for the control of Listeria monocytogenes in raw bovine meat pieces, both based on the use of Thymus vulgaris and Rosmarinus officinalis essential oils (EOs. The antilisterial activity of different concentrations of the EOs was tested in vitro using agar dilution and disk volatilization techniques. In addition, L. monocytogenes was inoculated in meat pieces, which were submerged in edible gelatin coatings containing 2% (v/v EOs or submitted to the vapor of EOs (0.74 μL.cm-3. L. monocytogenes was quantified after one, 48 and 96 hours of storage (7 °C. In the in vitro tests, the EO of T. vulgaris presented higher activity. The two options used (edible gelatin coating and vapor activity, in spite of exercising effects with differentiated behaviors, presented antibacterial activity against L. monocytogenes inoculated in raw bovine meat (p < 0.05. Greatest antibacterial activity were obtained in the experiment that used edible coatings containing EOs, at 48 hours of storage reductions in bacterial counts between 1.09 and 1.25 Log CFU.g-1 were obtained. In the vapor effect experiment, the EO of T. vulgaris caused the highest reduction in the population of bacteria inoculated in raw bovine meat (p < 0.05, 0.40 Log CFU.g-1 at 96 hours of storage. This study supplied important information regarding new and promising natural alternatives, based on the concept of active packaging, for the control of L. monocytogenes in the meat industry.

  2. Tall Fescue Alkaloids Bind Serotonin Receptors in Cattle

    Science.gov (United States)

    The serotonin (5HT) receptor 5HT2A is involved in the tall fescue alkaloid-induced vascular contraction in the bovine periphery. This was determined by evaluating the contractile responses of lateral saphenous veins biopsied from cattle grazing different tall fescue/endophyte combinations. The contr...

  3. Seedling Performance Associated with Live or Herbicide Treated Tall Fescue

    Directory of Open Access Journals (Sweden)

    Jonathan J. Halvorson

    2015-01-01

    Full Text Available Tall fescue is an important forage grass which can host systemic fungal endophytes. The association of host grass and endophyte is known to influence herbivore behavior and host plant competition for resources. Establishing legumes into existing tall fescue sods is a desirable means to acquire nitrogen and enhance the nutritive value of forage for livestock production. Competition from existing tall fescue typically must be controlled to ensure interseeding success. We used a soil-on-agar method to determine if soil from intact, living (L, or an herbicide killed (K tall fescue sward influenced germination and seedling growth of three cultivars of tall fescue (E+, MaxQ, and E− or legumes (alfalfa, red clover, and white clover. After 30 days, seedlings were larger and present in greater numbers when grown in L soil rather than K soil. Root growth of legumes (especially white clover and tall fescue (especially MaxQ were not as vigorous in K soil as L soil. While shoot biomass was similar for all cultivars of tall fescue in L soil, MaxQ produced less herbage when grown in K soil. Our data suggest establishing legumes or fescue cultivars may not be improved by first killing the existing fescue sod and seedling performance can exhibit significant interseasonal variation, related only to soil conditions.

  4. Coconut genome size determined by flow cytometry: Tall versus Dwarf types.

    Science.gov (United States)

    Freitas Neto, M; Pereira, T N S; Geronimo, I G C; Azevedo, A O N; Ramos, S R R; Pereira, M G

    2016-02-11

    Coconuts (Cocos nucifera L.) are tropical palm trees that are classified into Tall and Dwarf types based on height, and both types are diploid (2n = 2x = 32 chromosomes). The reproduction mode is autogamous for Dwarf types and allogamous for Tall types. One hypothesis for the origin of the Dwarf coconut suggests that it is a Tall variant that resulted from either mutation or inbreeding, and differences in genome size between the two types would support this hypothesis. In this study, we estimated the genome sizes of 14 coconut accessions (eight Tall and six Dwarf types) using flow cytometry. Nuclei were extracted from leaf discs and stained with propidium iodide, and Pisum sativum (2C = 9.07 pg DNA) was used as an internal standard. Histograms with good resolution and low coefficients of variation (2.5 to 3.2%) were obtained. The 2C DNA content ranged from 5.72 to 5.48 pg for Tall accessions and from 5.58 to 5.52 pg for Dwarf accessions. The mean genome sizes for Tall and Dwarf specimens were 5.59 and 5.55 pg, respectively. Among all accessions, Rennel Island Tall had the highest mean DNA content (5.72 pg), whereas West African Tall had the lowest (5.48 pg). The mean coconut genome size (2C = 5.57 pg, corresponding to 2723.73 Mbp/haploid set) was classified as small. Only small differences in genome size existed among the coconut accessions, suggesting that the Dwarf type did not evolve from the Tall type.

  5. Heat Release Rate of an Open Kitchen Fire of Small Residential Units in Tall Buildings

    OpenAIRE

    Chow, W.K.

    2014-01-01

    Many small units of area less than 30 m2 in residential buildings over 200 m tall are equipped with open kitchens in Asia, including Hong Kong. Fire safety provisions of these kitchens are determined by performance-based design (PBD). In most PBD projects, only the spread of smoke from the kitchen on fire to the outside was commonly studied. However, a fire load survey in Hong Kong indicated large quantities of combustibles are stored in residential units. Cooking oil was found to be ignited ...

  6. Analysis of quality of the biogasoils of palm oil and castor oil

    International Nuclear Information System (INIS)

    Benjumea, Pedro Nel; Agudelo, Jhon Ramiro; Benavides, Alirio Yovany

    2004-01-01

    Biodiesel is a fuel made from raw materials of renewable origin such as vegetable oils. The objective of this work is to make a quality analysis of two types of biodiesel made from raw materials available in Colombia such as palm oil and castor oil. Biodiesel from palm oil complies with the majority of technical requirements specified by ASTM standards D-975 y D-6751. A high cloud point is the main drawback of this kind of biodiesel. This is a consequence of its highly saturated chemical nature. On the other hand, biodiesel from castor oil presents more difficulties in order to be used in diesel engines because of having a low cetane index and a high viscosity

  7. Typological diversity of tall buildings and complexes in relation to their functional structure

    Science.gov (United States)

    Generalov, Viktor P.; Generalova, Elena M.; Kalinkina, Nadezhda A.; Zhdanova, Irina V.

    2018-03-01

    The paper focuses on peculiarities of tall buildings and complexes, their typology and its formation in relation to their functional structure. The research is based on the analysis of tall buildings and complexes and identifies the following main functional elements of their formation: residential, administrative (office), hotel elements. The paper also considers the following services as «disseminated» in the space-planning structure: shops, medicine, entertainment, kids and sports facilities, etc., their location in the structure of the total bulk of the building and their impact on typological diversity. Research results include suggestions to add such concepts as «single-function tall buildings» and «mixed-use tall buildings and complexes» into the classification of tall buildings. In addition, if a single-function building or complex performs serving functions, it is proposed to add such concepts as «a residential tall building (complex) with provision of services», «an administrative (public) tall building (complex) with provision of services» into the classification of tall buildings. For mixed-use buildings and complexes the following terms are suggested: «a mixed-use tall building with provision of services», «a mixed-use tall complex with provision of services».

  8. Deer Bone Oil Extract Suppresses Lipopolysaccharide-Induced Inflammatory Responses in RAW264.7 Cells.

    Science.gov (United States)

    Choi, Hyeon-Son; Im, Suji; Park, Yooheon; Hong, Ki-Bae; Suh, Hyung Joo

    2016-01-01

    The aim of this study was to investigate the effect of deer bone oil extract (DBOE) on lipopolysaccharide (LPS)-induced inflammatory responses in RAW264.7 cells. DBOE was fractionated by liquid-liquid extraction to obtain two fractions: methanol fraction (DBO-M) and hexane fraction (DBO-H). TLC showed that DBO-M had relatively more hydrophilic lipid complexes, including unsaturated fatty acids, than DBOE and DBO-H. The relative compositions of tetradecenoyl carnitine, α-linoleic acid, and palmitoleic acid increased in the DBO-M fraction by 61, 38, and 32%, respectively, compared with DBOE. The concentration of sugar moieties was 3-fold higher in the DBO-M fraction than DBOE and DBO-H. DBO-M significantly decreased LPS-induced nitric oxide (NO) production in RAW264.7 cells in a dose-dependent manner. This DBO-M-mediated decrease in NO production was due to downregulation of mRNA and protein levels of inducible nitric oxide synthase (iNOS). In addition, mRNA expression of pro-inflammatory mediators, such as cyclooxygenase (COX-2), interleukin (IL)-1β, and IL-12β, was suppressed by DBO-M. Our data showed that DBO-M, which has relatively higher sugar content than DBOE and DBO-H, could play an important role in suppressing inflammatory responses by controlling pro-inflammatory cytokines and mediators.

  9. Tall Buildings and Urban Habitat of the 21st Century: A Global Perspective

    Directory of Open Access Journals (Sweden)

    Mir M. Ali

    2012-09-01

    Full Text Available The tall building is the most dominating symbol of the cities and a human-made marvel that defies gravity by reaching to the clouds. It embodies unrelenting human aspirations to build even higher. It conjures a number of valid questions in our minds. The foremost and fundamental question that is often asked: Why tall buildings? This review paper seeks to answer the question by laying out arguments against and for tall buildings. Then, it provides a brief account of the historic and recent developments of tall buildings including their status during the current economic recession. The paper argues that as cities continue to expand horizontally, to safeguard against their reaching an eventual breaking point, the tall building as a building type is a possible solution by way of conquering vertical space through agglomeration and densification. Case studies of some recently built tall buildings are discussed to illustrate the nature of tall building development in their respective cities. The paper attempts to dispel any discernment about tall buildings as mere pieces of art and architecture by emphasizing their truly speculative, technological, sustainable, and evolving nature. It concludes by projecting a vision of tall buildings and their integration into the cities of the 21st century.

  10. Detection of the presence of used frying oil as raw material in biodiesel production

    Directory of Open Access Journals (Sweden)

    Dobarganes, M. C.

    2008-12-01

    Full Text Available The detection of compounds giving information on the use of used frying oils as raw material in the production of biodiesel is of interest to guarantee the quality of the product. In this study, the most characteristic groups of compounds formed after used frying oil transesterification were analyzed by means of the standard technique using gas chromatography at a high temperature (EN 14105. Dimeric fatty acid methyl esters (dimeric FAME is the most important group to be considered as they are present in significant amounts after used frying oil transesterification. On the other hand, they are absent in the bleached oils used for biodiesel production. The concentration of the dimeric FAME in the polar fraction of biodiesel, easily obtained by adsorption chromatography, allowed detection of this group of compounds even in very low concentrations.La detección de compuestos característicos de los aceites de fritura usados como materia prima de bajo coste en la obtención de biodiesel, es de interés para garantizar su calidad. En este estudio, se analizan los grupos de compuestos más característicos obtenidos tras la transesterificación de los aceites de fritura mediante la técnica estándar que utiliza cromatografía de gases a temperatura elevada (European Standard EN 14105. Los dímeros de ésteres metílicos son los compuestos más importantes para detectar el aceite de fritura como materia prima, debido a su presencia en cantidades significativas después de la transesterificación de los aceites de fritura y a su ausencia en los aceites decolorados que se utilizan en la obtención de biodiesel. La concentración de los dímeros en la fracción polar del biodiesel, fácilmente obtenida mediante cromatografía de adsorción, permite detectar los citados compuestos incluso a concentraciones muy bajas.

  11. Comparison of Dynamic Characteristics of Two Instrumented Tall Buildings

    DEFF Research Database (Denmark)

    Ventura, C.; Laverick, B.; Brincker, Rune

    2003-01-01

    attention to the three-dimensional nonlinear dynamic behaviour of tall buildings, so there is a need for these types of studies. The purpose of this paper is to study the dynamic properties of two well-instrumented tall steel frame buildings in Los Angeles, California. These building are within a few blocks...

  12. Recovery of the secondary raw materials, recycling

    International Nuclear Information System (INIS)

    Chmielewska, E.

    2010-01-01

    In this chapter the recovery and recycling of secondary raw materials is explained. This chapter consists of the following parts: Paper and tetrapaks; Car wrecks; Scrap metal; Plastics; Used tires; Electrical and electronic equipment; Glass; Accumulators and batteries; Spent oil; Low-and non-waste technology.

  13. 1996 Progress report on energies and raw materials; 1996 rapport d`activite energies et matieres premieres

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The 1996 annual progress report, from the French Department of Energy, reviews the key points of the French policy for energy and raw materials: competitiveness, environmental protection, long term supply safety, and public service. 1996 was marked by positive results for the French energy industry, difficulties for the oil refining industry, and a new impetus for renewable energies. Five surveys are presented: nuclear safety in Eastern Europe, the european directive on electric power domestic market, evolution of the oil market, conditions of refining in France, and restructuring of the Mine bureau (BRGM). 40 prominent facts are briefly reviewed, concerning sustainable energy development, nuclear energy, electric power and gas, coal, oil products, raw materials. Diagrams on energy and raw materials are also included

  14. 1996 Progress report on energies and raw materials; 1996 rapport d`activite energies et matieres premieres

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The 1996 annual progress report, from the French Department of Energy, reviews the key points of the French policy for energy and raw materials: competitiveness, environmental protection, long term supply safety, and public service. 1996 was marked by positive results for the French energy industry, difficulties for the oil refining industry, and a new impetus for renewable energies. Five surveys are presented: nuclear safety in Eastern Europe, the european directive on electric power domestic market, evolution of the oil market, conditions of refining in France, and restructuring of the Mine bureau (BRGM). 40 prominent facts are briefly reviewed, concerning sustainable energy development, nuclear energy, electric power and gas, coal, oil products, raw materials. Diagrams on energy and raw materials are also included

  15. Lifting Wing in Constructing Tall Buildings —Aerodynamic Testing

    Directory of Open Access Journals (Sweden)

    Ian Skelton

    2014-05-01

    Full Text Available This paper builds on previous research by the authors which determined the global state-of-the-art of constructing tall buildings by surveying the most active specialist tall building professionals around the globe. That research identified the effect of wind on tower cranes as a highly ranked, common critical issue in tall building construction. The research reported here presents a design for a “Lifting Wing,” a uniquely designed shroud which potentially allows the lifting of building materials by a tower crane in higher and more unstable wind conditions, thereby reducing delay on the programmed critical path of a tall building. Wind tunnel tests were undertaken to compare the aerodynamic performance of a scale model of a typical “brick-shaped” construction load (replicating a load profile most commonly lifted via a tower crane against the aerodynamic performance of the scale model of the Lifting Wing in a range of wind conditions. The data indicate that the Lifting Wing improves the aerodynamic performance by a factor of up to 50%.

  16. Trace Metal Levels in Raw and Heat Processed Nigerian Staple ...

    African Journals Online (AJOL)

    The levels of some trace metals (Fe, Zn, Cu, Ni, Cd) were quantitatively determined in raw and heat processed staple food cultivars (yam, cassava, cocoyam and maize) from oil producing areas of part of the Niger Delta and compared with a non-oil producing area of Ebonyi State as control. The survey was conducted to ...

  17. Nonlinear behaviors of FRP-wrapped tall trees subjected to high wind loads

    Science.gov (United States)

    Kang, J.; Yi, Z. Z.; Choi, S. G.

    2017-12-01

    This study investigated the mechanical stability of historical tall trees wrapped with fiber-reinforced polymer (FRP) laminates using finite element (FE) analysis. High wind loads are considered as external loading conditions as they are one of the major threats on the structural stability of tall old trees. There have been several traditional practices to enhance the stability of tall trees exposed to high windstorms such as tree supporters and anchorages. They, however, have been sometimes causing negative effects with their misuses as the application guidelines for those methods were not adequately studied or documented. Furthermore, the oldest known trees in the country should be protected from the damage of external surface as well as ruin of the landscape. The objective of this study was to evaluate the structural effects of FRP wraps applied to tall trees subjected to high wind loads. The anisotropic material properties of wood and FRP laminates were considered in the analysis in addition to geometrically nonlinear behaviors. This study revealed that FRP wrapping for tall trees could effectively reduce the deflections and maximum stresses of trees, which results in the enhanced stability of tall trees. The optimum geometry and thicknesses of FRP wraps proposed in this study would provide fundemental guidelines for designing and constructing the application of innovative FRP wraps on tall trees, which are structurally unstable or should be preserved nationally and historically.

  18. Environmental Impacts and Costs of Hydrotreated Vegetable Oils, Transesterified Lipids and Woody BTL—A Review

    Directory of Open Access Journals (Sweden)

    Andreas Brekke

    2011-05-01

    Full Text Available This article reviews and compares assessments of three biodiesel fuels: (1 transesterified lipids, (2 hydrotreated vegetable oils (HVO, and (3 woody biomass-to-liquid (BTL Fischer-Tropsch diesel and selected feedstock options. The article attempts to rank the environmental performance and costs of fuel and feedstock combinations. Due to inter-study differences in goal and study assumptions, the ranking was mostly qualitative and intra-study results are emphasized. Results indicate that HVO made from wastes or by-products such as tall oil, tallow or used cooking oil outperform transesterified lipids and BTL from woody material, both with respect to environmental life cycle impacts and costs. These feedstock options are, however, of limited availability, and to produce larger volumes of biofuels other raw materials must also be used. BTL from woody biomass seems promising with good environmental performance and the ability not to compete with food production. Production of biofuels from agricultural feedstock sources requires much energy and leads to considerable emissions due to agrochemical inputs. Thus, such biodiesel fuels are ranked lowest in this comparison. Production of feedstock is the most important life cycle stage. Avoiding detrimental land use changes and maintaining good agricultural or forestry management practices are the main challenges to ensure that biofuels can be a sustainable option for the future transport sector.

  19. Evaluation of mineral oil saturated hydrocarbons (MOSH and mineral oil aromatic hydrocarbons (MOAH in pure mineral hydrocarbon-based cosmetics and cosmetic raw materials using 1H NMR spectroscopy [version 2; referees: 3 approved

    Directory of Open Access Journals (Sweden)

    Dirk W. Lachenmeier

    2017-08-01

    Full Text Available Mineral hydrocarbons consist of two fractions, mineral oil saturated hydrocarbons (MOSH and mineral oil aromatic hydrocarbons (MOAH. MOAH is a potential public health hazard because it may include carcinogenic polycyclic compounds. In the present study, 400 MHz nuclear magnetic resonance (NMR spectroscopy was introduced, in the context of official controls, to measure MOSH and MOAH in raw materials or pure mineral hydrocarbon final products (cosmetics and medicinal products. Quantitative determination (qNMR has been established using the ERETIC methodology (electronic reference to access in vivo concentrations based on the PULCON principle (pulse length based concentration determination. Various mineral hydrocarbons (e.g., white oils, paraffins or petroleum jelly were dissolved in deuterated chloroform. The ERETIC factor was established using a quantification reference sample containing ethylbenzene and tetrachloronitrobenzene. The following spectral regions were integrated: MOSH δ 3.0 – 0.2 ppm and MOAH δ 9.2 - 6.5, excluding solvent signals. Validation showed a sufficient precision of the method with a coefficient of variation <6% and a limit of detection <0.1 g/100 g. The applicability of the method was proven by analysing 27 authentic samples with MOSH and MOAH contents in the range of 90-109 g/100 g and 0.02-1.10 g/100 g, respectively. It is important to distinguish this new NMR-approach from the hyphenated liquid chromatography-gas chromatography methodology previously used to characterize MOSH/MOAH amounts in cosmetic products. For mineral hydrocarbon raw materials or pure mineral hydrocarbon-based cosmetic products, NMR delivers higher specificity without any sample preparation besides dilution. Our sample survey shows that previous methods may have overestimated the MOAH amount in mineral oil products and opens new paths to characterize this fraction. Therefore, the developed method can be applied for routine monitoring of consumer

  20. The potential of using vegetable oil fuels as fuel for diesel engines

    International Nuclear Information System (INIS)

    Altin, Recep; Cetinkaya, Selim; Yucesu, Huseyin Serdar

    2001-01-01

    Vegetable oils are produced from numerous oil seed crops. While all vegetable oils have high energy content, most require some processing to assure safe use in internal combustion engines. Some of these oils already have been evaluated as substitutes for diesel fuels. The effects of vegetable oil fuels and their methyl esters (raw sunflower oil, raw cottonseed oil, raw soybean oil and their methyl esters, refined corn oil, distilled opium poppy oil and refined rapeseed oil) on a direct injected, four stroke, single cylinder diesel engine performance and exhaust emissions was investigated in this paper. The results show that from the performance viewpoint, both vegetable oils and their esters are promising alternatives as fuel for diesel engines. Because of their high viscosity, drying with time and thickening in cold conditions, vegetable oil fuels still have problems, such as flow, atomisation and heavy particulate emissions. (Author)

  1. The potential of using vegetable oil fuels as fuel for diesel engines

    Energy Technology Data Exchange (ETDEWEB)

    Altin, Recep [Ministry of Education, Projects Coordination Unit, Ankara (Turkey); Cetinkaya, Selim [Gazi Univ., Technical Education Faculty, Ankara (Turkey); Yucesu, Huseyin Serdar [Karaelmas Univ., Technical Education Faculty, Karabuk (Turkey)

    2001-03-01

    Vegetable oils are produced from numerous oil seed crops. While all vegetable oils have high energy content, most require some processing to assure safe use in internal combustion engines. Some of these oils already have been evaluated as substitutes for diesel fuels. The effects of vegetable oil fuels and their methyl esters (raw sunflower oil, raw cottonseed oil, raw soybean oil and their methyl esters, refined corn oil, distilled opium poppy oil and refined rapeseed oil) on a direct injected, four stroke, single cylinder diesel engine performance and exhaust emissions was investigated in this paper. The results show that from the performance viewpoint, both vegetable oils and their esters are promising alternatives as fuel for diesel engines. Because of their high viscosity, drying with time and thickening in cold conditions, vegetable oil fuels still have problems, such as flow, atomisation and heavy particulate emissions. (Author)

  2. Urban Rights-of-Way as Reservoirs for Tall-Grass Prairie Plants and Butterflies

    Science.gov (United States)

    Leston, Lionel; Koper, Nicola

    2016-03-01

    Urban rights-of-way may be potential reservoirs of tall-grass prairie plants and butterflies. To determine if this is true, in 2007-2008, we conducted vegetation surveys of species richness and cover, and butterfly surveys of species richness and abundance, along 52 transmission lines and four remnant prairies in Winnipeg, Manitoba. We detected many prairie plants and butterflies within transmission lines. Some unmowed and infrequently managed transmission lines had native plant species richness and total percent cover of native plants comparable to that of similar-sized remnant tall-grass prairies in the region. Although we did not find significant differences in overall native butterfly numbers or species richness between rights-of-way and remnant prairies, we found lower numbers of some prairie butterflies along frequently mowed rights-of-way than within remnant tall-grass prairies. We also observed higher butterfly species richness along sites with more native plant species. By reducing mowing and spraying and reintroducing tall-grass prairie plants, urban rights-of-way could serve as extensive reservoirs for tall-grass prairie plants and butterflies in urban landscapes. Eventually, managing urban rights-of-way as reservoirs for tall-grass prairie plants and animals could contribute to the restoration of tall-grass prairie in the North American Midwest.

  3. Urban Rights-of-Way as Reservoirs for Tall-Grass Prairie Plants and Butterflies.

    Science.gov (United States)

    Leston, Lionel; Koper, Nicola

    2016-03-01

    Urban rights-of-way may be potential reservoirs of tall-grass prairie plants and butterflies. To determine if this is true, in 2007-2008, we conducted vegetation surveys of species richness and cover, and butterfly surveys of species richness and abundance, along 52 transmission lines and four remnant prairies in Winnipeg, Manitoba. We detected many prairie plants and butterflies within transmission lines. Some unmowed and infrequently managed transmission lines had native plant species richness and total percent cover of native plants comparable to that of similar-sized remnant tall-grass prairies in the region. Although we did not find significant differences in overall native butterfly numbers or species richness between rights-of-way and remnant prairies, we found lower numbers of some prairie butterflies along frequently mowed rights-of-way than within remnant tall-grass prairies. We also observed higher butterfly species richness along sites with more native plant species. By reducing mowing and spraying and reintroducing tall-grass prairie plants, urban rights-of-way could serve as extensive reservoirs for tall-grass prairie plants and butterflies in urban landscapes. Eventually, managing urban rights-of-way as reservoirs for tall-grass prairie plants and animals could contribute to the restoration of tall-grass prairie in the North American Midwest.

  4. The characteristics of palm oil plantation solid biomass wastes as raw material for bio oil

    Science.gov (United States)

    Yanti, RN; Hambali, E.; Pari, G.; Suryani, A.

    2018-03-01

    Indonesia is the largest palm oil plantations estate in the world. It reached 11,30 million hectares in 2015 and increased up to 11,67 million hectares in 2016. The advancement of technology recent, the solid waste of palm oil plantation can be re-produced become bio oil through pyrolysis hydrothermal process and utilized for biofuel. The purpose of this research was to analyze the characteristics of feedstock of bio oil of solid waste of palm oil plantations estate. The feedstock used was derived from solid waste of palm oil plantations in Riau Province. Characteristic analysis of waste oil included chemical compound content (cellulose, hemicellulose, lignin), ultimate analysis (C, H, N, O, S) to know height heating value (HHV). The result of analysis of chemical content showed that solid waste of palm cellulose 31,33 – 66,36 %, hemicellulose 7,54 – 17,94 %, lignin 21,43 - 43,1. The HHV of hydrothermal pyrolysis feedstock was 15,18 kJ/gram - 19,57 kJ/gram. Generally, the solid waste of palm oil plantations estate containing lignocellulose can be utilized as bio oil through hydrothermal pyrolysis. The CG-MS analysis of bio oil indicated hydrocarbon contents such as pentadecane, octadecane, hexadecane and benzene.

  5. Seedling Establishment of Tall Fescue Exposed to Long-Term Starvation Stress

    Czech Academy of Sciences Publication Activity Database

    Pompeiano, Antonio; Damiani, C. R.; Stefanini, S.; Vernieri, S.; Reyes, T. H.; Volterrani, M.; Guglielminetti, L.

    2016-01-01

    Roč. 11, č. 11 (2016), č. článku e0166131. E-ISSN 1932-6203 Institutional support: RVO:67179843 Keywords : seedling * Tall fescue * Tall fescue exposed * starvation Subject RIV: EH - Ecology, Behaviour Impact factor: 2.806, year: 2016

  6. Modeling Manpower and Equipment Productivity in Tall Building Construction Projects

    Science.gov (United States)

    Mudumbai Krishnaswamy, Parthasarathy; Rajiah, Murugasan; Vasan, Ramya

    2017-12-01

    Tall building construction projects involve two critical resources of manpower and equipment. Their usage, however, widely varies due to several factors affecting their productivity. Currently, no systematic study for estimating and increasing their productivity is available. What is prevalent is the use of empirical data, experience of similar projects and assumptions. As tall building projects are here to stay and increase, to meet the emerging demands in ever shrinking urban spaces, it is imperative to explore ways and means of scientific productivity models for basic construction activities: concrete, reinforcement, formwork, block work and plastering for the input of specific resources in a mixed environment of manpower and equipment usage. Data pertaining to 72 tall building projects in India were collected and analyzed. Then, suitable productivity estimation models were developed using multiple linear regression analysis and validated using independent field data. It is hoped that the models developed in the study will be useful for quantity surveyors, cost engineers and project managers to estimate productivity of resources in tall building projects.

  7. Evaluation of tall rice mutant

    International Nuclear Information System (INIS)

    Hakim, L.; Azam, M.A.; Miah, A.J.; Mansur, M.A.; Akanda, H.R.

    1989-01-01

    One tall mutant (Mut NS1) of rice variety Nizersail was put to multilocation on-farm trial. It showed improvement over the parent in respect of by earlier maturity and higher grain yield at all locations and thus it appears as an improved mutant of Nizersail. (author). 6 refs

  8. Soil Organic Carbon Fractions Differ in Two Contrasting Tall Fescue Systems

    Science.gov (United States)

    The value of tall fescue (Festuca arundinacea Schreb.) for C sequestration in addition to forage production and soil conservation is of current interest. However, studies relating to the impacts of endophyte infected (E+) and endophyte free (E-) tall fescue on soil organic matter fractions are few....

  9. Bio-Oil Analysis Laboratory Procedures | Bioenergy | NREL

    Science.gov (United States)

    Bio-Oil Analysis Laboratory Procedures Bio-Oil Analysis Laboratory Procedures NREL develops laboratory analytical procedures (LAPs) for the analysis of raw and upgraded pyrolysis bio-oils. These standard procedures have been validated and allow for reliable bio-oil analysis. Procedures Determination

  10. Does Size Matter? Short and Tall Officers Policing the Streets

    Directory of Open Access Journals (Sweden)

    Pål Lagestad

    2013-04-01

    Full Text Available The importance of physical characteristics is rarely addressed in the literature on professional competence and authority. In police work it is almost taken for granted that height is advantageous in police work, despite a lack of research on the topic. This study examines how height may affect police inter-actions with the public and how short and tall men and women experience the importance of their height in patrol work. Results show that being tall was perceived as beneficial in patrol work. Furthermore, the authority of short police officers is challenged more often by the public, and short female police may have a particular focus on verbal communication. Tallness will probably be perceived as beneficial in fields in which physical conflicts arises.

  11. Investigation on pyrolysis of some organic raw materials

    Directory of Open Access Journals (Sweden)

    Purevsuren B

    2017-02-01

    Full Text Available We have been working on pyrolysis of some organic raw materials including different rank coals, oil shale, wood waste, animal bone, cedar shell, polypropylene waste, milk casein and characterization of obtained hard residue, tar and pyrolytic water and gas after pyrolysis. The technical characteristics of these organic raw materials have been determined and the thermal stability characteristics such as thermal stability indices (T5% and T25% determined by using thermogravimetric analysis. The pyrolysis experiments were performed at different heating temperatures and the yields of hard residue, tar, pyrolysis water and gaseous products were determined and discussed. The main technical characteristics of hard residue of organic raw materials after pyrolysis have been determined and the adsorption ability of pyrolysis hard residue and its activated carbon of organic raw materials also determined. The pyrolysis tars of organic raw materials were distilled in air condition and determined the yields of obtained light, middle and heavy fractions and bitumen like residue with different boiling temperature. This is the first time to investigate the curing ability of pyrolysis tars of organic raw materials for epoxy resin and the results of these experiments showed that only tar of milk casein has the highest (95.0%, tar of animal bone has certain (18.70% and tars of all other organic raw materials have no curing ability for epoxy resin.

  12. Pedestrian wind environment around tall buildings

    NARCIS (Netherlands)

    Stathopoulos, T.; Blocken, B.; Tamura, Yukio; Yoshie, Ryuichiro

    2016-01-01

    Pedestrian-level wind conditions around tall buildings are described by examining the aerodynamics of the urban environment and the various wind comfort criteria established in the wind engineering field. Experimental and, possibly, computational assessment of pedestrian-level wind conditions in the

  13. Degummed crude canola oil, sire breed and gender effects on intramuscular long-chain omega-3 fatty acid properties of raw and cooked lamb meat.

    Science.gov (United States)

    Flakemore, Aaron Ross; Malau-Aduli, Bunmi Sherifat; Nichols, Peter David; Malau-Aduli, Aduli Enoch Othniel

    2017-01-01

    Omega-3 long-chain (≥C 20 ) polyunsaturated fatty acids (ω3 LC-PUFA) confer important attributes to health-conscious meat consumers due to the significant role they play in brain development, prevention of coronary heart disease, obesity and hypertension. In this study, the ω3 LC-PUFA content of raw and cooked Longissimus thoracis et lumborum (LTL) muscle from genetically divergent Australian prime lambs supplemented with dietary degummed crude canola oil (DCCO) was evaluated. Samples of LTL muscle were sourced from 24 first cross ewe and wether lambs sired by Dorset, White Suffolk and Merino rams joined to Merino dams that were assigned to supplemental regimes of degummed crude canola oil (DCCO): a control diet at 0 mL/kg DM of DCCO (DCCOC); 25 mL/kg DM of DCCO (DCCOM) and 50 mL/kg DCCO (DCCOH). Lambs were individually housed and offered 1 kg/day/head for 42 days before being slaughtered. Samples for cooked analysis were prepared to a core temperature of 70 °C using conductive dry-heat. Within raw meats: DCCOH supplemented lambs had significantly ( P  culinary preparation method can be used as effective management tools to deliver nutritionally improved ω3 LC-PUFA lamb to meat consumers.

  14. The identification of specific cDNA clones from tall and dwarf rice plants

    International Nuclear Information System (INIS)

    Youssefian, S.; Kamada, I.; Sano, H.

    1990-01-01

    Full text: The use of dwarfing genes in rice breeding has proceeded for several years without a clear understanding of the genetic, hormonal and physiological mechanisms involved. This issue was addressed by focussing on the isolation of specific clones from tall- and dwarf-derived cDNA libraries. The materials used include near-isogenic lines of the tall rice cultivar 'Shiokari', differing at the DGWG or 'Tanginbozu' dwarfing gene loci. Also used were tall and dwarf 'Ginbozu' rice, the latter having been induced by treatment with 5-azacytidine, a potent demethylating agent. Subtractive and differential hybridisation have, to date, identified several candidate tall- and dwarf-specific clones. Their further characterisation is currently underway. (author)

  15. Managing the tall fescue-fungal endophyte symbiosis for optimum forage-animal production

    Science.gov (United States)

    Alkaloids produced by the fungal endophyte (Neotyphodium coenophialum) that infects tall fescue [Lolium arundinaceum (Schreb.) Darbysh.] are a paradox to cattle production. While certain alkaloids impart tall fescue with tolerances to environmental stresses, such as moisture, heat, and herbivory, e...

  16. 77 FR 39395 - Special Local Regulations; Ocean State Tall Ships Festival 2012, Narragansett Bay, RI

    Science.gov (United States)

    2012-07-03

    ...-AA08 Special Local Regulations; Ocean State Tall Ships Festival 2012, Narragansett Bay, RI AGENCY... Tall Ships Festival 2012. DATES: This rule is effective from July 6, 2012 until July 10, 2012... ``Special Local Regulations: Ocean State Tall Ships Festival 2012, Narragansett Bay, RI'' in the Federal...

  17. The technological raw material heating furnaces operation efficiency improving issue

    Science.gov (United States)

    Paramonov, A. M.

    2017-08-01

    The issue of fuel oil applying efficiency improving in the technological raw material heating furnaces by means of its combustion intensification is considered in the paper. The technical and economic optimization problem of the fuel oil heating before combustion is solved. The fuel oil heating optimal temperature defining method and algorithm analytically considering the correlation of thermal, operating parameters and discounted costs for the heating furnace were developed. The obtained optimization functionality provides the heating furnace appropriate thermal indices achievement at minimum discounted costs. The carried out research results prove the expediency of the proposed solutions using.

  18. 77 FR 16974 - Special Local Regulations; Ocean State Tall Ships Festival 2012, Narragansett Bay, RI

    Science.gov (United States)

    2012-03-23

    ...-AA08 Special Local Regulations; Ocean State Tall Ships Festival 2012, Narragansett Bay, RI AGENCY... Island, for the Ocean State Tall Ships Festival 2012. This action is necessary to provide for the safety..., during the Ocean State Tall Ships Festival on July 6-9, 2012. These temporary special local regulations...

  19. Tomato Sauce Enriched with Olive Oil Exerts Greater Effects on Cardiovascular Disease Risk Factors than Raw Tomato and Tomato Sauce: A Randomized Trial

    Directory of Open Access Journals (Sweden)

    Palmira Valderas-Martinez

    2016-03-01

    Full Text Available Epidemiological studies have observed a negative association between tomato intake and the incidence of cardiovascular disease. As tomato sauces are usually cooked with the addition of oil, some studies have pointed out that both processes may increase the bioavailability of the bioactive compounds. However, the effect of consumption of raw tomatoes and tomato sauces on inflammation biomarkers and adhesion molecules related to atherosclerosis remains unknown. The aim of this study was to test the postprandial effects of a single dose of raw tomatoes (RT, tomato sauce (TS and tomato sauce with refined olive oil (TSOO on cardiovascular disease risk factors. We performed an open, prospective, randomized, cross-over, controlled feeding trial in 40 healthy subjects who randomly received: 7.0 g of RT/kg of body weight (BW, 3.5 g of TS/kg BW, 3.5 g of TSOO/Kg BW and 0.25 g of sugar solved in water/kg BW on a single occasion on four different days. Biochemical parameters and cellular and circulating inflammatory biomarkers were assessed at baseline and 6 h after each intervention. The results indicate that, compared to control intervention, a single tomato intake in any form decreased plasma total cholesterol, triglycerides and several cellular and plasma inflammatory biomarkers, and increased plasma high density lipoproteins (HDL cholesterol and interleukine (IL 10 concentrations. However, the changes of plasma IL-6 and vascular cell adhesion molecule-1 (VCAM-1, and lymphocyte function-associated antigen-1 (LFA-1 from T-lymphocytes and CD36 from monocytes were significantly greater after TSOO than after RT and TS interventions. We concluded that tomato intake has beneficial effects on cardiovascular risk factors, especially cooked and enriched with oil.

  20. Cotton for removal of aquatic oil spills

    International Nuclear Information System (INIS)

    Parker, H.W.; Fedler, C.B.; Heintz, C.E.; Nash, P.T.; Carr, D.L.; Lu, M.

    1992-01-01

    Raw cotton has considerable potential for selective removal of spilled oil and oil products from surface waters, since the natural waxes on the raw cotton make it preferentially oil wet. This potential was recognized in the early seventies at Texas Tech University. More recently other research workers have considered cotton as an adsorbent for spilled oil. The adsorbent market is now dominated by synthetic materials, such as air-blown polypropylene fiber, inorganic clays, and recycled paper and paper products. This paper further examines the potential of cotton in relation to these other adsorbents. Emphasis is placed on the potential for complete biodegradation of oil-soaked cotton adsorbents as a means avoiding the expense for incineration and/or the long-term environmental risk associated with placing the used adsorbents in landfills

  1. Renewable resources in the chemical industry--breaking away from oil?

    Science.gov (United States)

    Nordhoff, Stefan; Höcker, Hans; Gebhardt, Henrike

    2007-12-01

    Rising prices for fossil-based raw materials suggest that sooner or later renewable raw materials will, in principle, become economically viable. This paper examines this widespread paradigm. Price linkages like those seen for decades particularly in connection with petrochemical raw materials are now increasingly affecting renewable raw materials. The main driving force is the competing utilisation as an energy source because both fossil-based and renewable raw materials are used primarily for heat, electrical power and mobility. As a result, prices are determined by energy utilisation. Simple observations show how prices for renewable carbon sources are becoming linked to the crude oil price. Whether the application calls for sugar, starch, virgin oils or lignocellulose, the price for the raw material rises with the oil price. Consequently, expectations regarding price trends for fossil-based energy sources can also be utilised for the valuation of alternative processes. However, this seriously calls into question the assumption that a rising crude oil price will favour the economic viability of alternative products and processes based on renewable raw materials. Conversely, it follows that these products and processes must demonstrate economic viability today. Especially in connection with new approaches in white biotechnology, it is evident that, under realistic assumptions, particularly in terms of achievable yields and the optimisation potential of the underlying processes, the route to utilisation is economically viable. This makes the paradigm mentioned at the outset at least very questionable.

  2. Rapamycin sensitizes T-ALL cells to dexamethasone-induced apoptosis

    Directory of Open Access Journals (Sweden)

    Mu Dezhi

    2010-11-01

    Full Text Available Abstract Background Glucocorticoid (GC resistance is frequently seen in acute lymphoblastic leukemia of T-cell lineage (T-ALL. In this study we investigate the potential and mechanism of using rapamycin to restore the sensitivity of GC-resistant T-ALL cells to dexamethasone (Dex treatment. Methods Cell proliferation was detected by 3-(4,5-dimethylthiazol-2-yl- 2,5-diphenyltetrazolium bromide (MTT assay. Fluorescence-activated cell sorting (FACS analysis was used to analyze apoptosis and cell cycles. Western blot analysis was performed to test the expression of the downstream effector proteins of mammalian target of rapamycin (mTOR, the cell cycle regulatory proteins, and apoptosis associated proteins. Results 10 nM rapamycin markedly increased GC sensitivity in GC-resistant T-ALL cells and this effect was mediated, at least in part, by inhibition of mTOR signaling pathway. Cell cycle arrest was associated with modulation of G1-S phase regulators. Both rapamycin and Dex can induce up-regulation of cyclin-dependent kinase (CDK inhibitors of p21 and p27 and co-treatment of rapamycin with Dex resulted in a synergistic induction of their expressions. Rapamycin did not obviously affect the expression of cyclin A, whereas Dex induced cyclin A expression. Rapamycin prevented Dex-induced expression of cyclin A. Rapamycin had a stronger inhibition of cyclin D1 expression than Dex. Rapamycin enhanced GC-induced apoptosis and this was not achieved by modulation of glucocorticoid receptor (GR expression, but synergistically up-regulation of pro-apoptotic proteins like caspase-3, Bax, and Bim, and down-regulation of anti-apoptotic protein of Mcl-1. Conclusion Our data suggests that rapamycin can effectively reverse GC resistance in T-ALL and this effect is achieved by inducing cell cycles arrested at G0/G1 phase and activating the intrinsic apoptotic program. Therefore, combination of mTOR inhibitor rapamycin with GC containing protocol might be an attracting

  3. Hydroprocesssing of light gas oil - rape oil mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Walendziewski, Jerzy; Stolarski, Marek; Luzny, Rafal; Klimek, Bartlomiej [Faculty of Chemistry, Wroclaw University of Technology, ul. Gdanska 7/9, 50-310 Wroclaw (Poland)

    2009-05-15

    Two series of experiments of hydroprocessing of light gas oil - rape oil mixtures were carried out. The reactor feed was composed of raw material: first series - 10 wt.% rape oil and 90 wt.% of diesel oil; second series - 20 wt.% rape oil and 80 wt.% of diesel oil. Hydroprocessing of both mixtures was performed with the same parameter sets, temperature (320, 350 and 380 C), hydrogen pressure 3 and 5 MPa, LHSV = 2 h{sup -} {sup 1} and hydrogen feed ratio of 500 Nm{sup 3}/m{sup 3}. It was stated that within limited range it is possible to control vegetable oil hydrogenolysis in the presence of light gas oil fraction (diesel oil boiling range) through the proper selection of the process parameters. Hydrogenolysis of ester bonds and hydrogenation of olefinic bonds in vegetable oils are the main reactions in the process. Basic physicochemical properties of the obtained hydroprocessed products are presented. (author)

  4. Method for manufacturing raw mass for gas concrete

    Energy Technology Data Exchange (ETDEWEB)

    Hellestam, C J.S.

    1949-06-30

    A method is described for processing a raw mass of oil shale and limestone directly useable for the production of gas concrete, characterized in that the processing is divided into three partial processes, of which the first comprises a pyrolysis with extraction of oil, shale gas, hydrogen sulfide and shale coke; the second, burning of the shale coke while preventing the fusing temperature from being exceeded; and the third partial process is a continued burning at higher temperature in the range of 1100/sup 0/C after the addition of limestone and, if required, extra fuel.

  5. Tall Poppies: Bullying Behaviors Faced by Australian High-Performance School-Age Athletes

    Science.gov (United States)

    O'Neill, Maureen; Calder, Angela; Allen, Bill

    2014-01-01

    Little is known about Australian high-performance school-age athletes' experiences as victims of the tall poppy syndrome. Tall poppies are successful individuals bullied by those who are less successful in order to "normalize them." Nineteen current or previous national or international high-performance school-age athletes were…

  6. Metacarpal index in Marfan's syndrome and in constitutional tall stature.

    OpenAIRE

    Nelle, M; Tröger, J; Rupprath, G; Bettendorf, M

    1994-01-01

    The metacarpal index (MCI) in 54 children with constitutional tall stature was mean (SD) 8.65 (0.8) and in 55 with Marfan's syndrome 9.15 (0.9). Indices in both groups showed arachnodactyly and differed from those found in normal individuals (< 7.9). Because the MCI is a poor discriminator patients with tall stature or clinical signs of arachnodactyly should be examined for additional signs of Marfan's syndrome or other hereditary disorders of connective tissue.

  7. Collapse of tall granular columns in fluid

    Science.gov (United States)

    Kumar, Krishna; Soga, Kenichi; Delenne, Jean-Yves

    2017-06-01

    Avalanches, landslides, and debris flows are geophysical hazards, which involve rapid mass movement of granular solids, water, and air as a multi-phase system. In order to describe the mechanism of immersed granular flows, it is important to consider both the dynamics of the solid phase and the role of the ambient fluid. In the present study, the collapse of a granular column in fluid is studied using 2D LBM - DEM. The flow kinematics are compared with the dry and buoyant granular collapse to understand the influence of hydrodynamic forces and lubrication on the run-out. In the case of tall columns, the amount of material destabilised above the failure plane is larger than that of short columns. Therefore, the surface area of the mobilised mass that interacts with the surrounding fluid in tall columns is significantly higher than the short columns. This increase in the area of soil - fluid interaction results in an increase in the formation of turbulent vortices thereby altering the deposit morphology. It is observed that the vortices result in the formation of heaps that significantly affects the distribution of mass in the flow. In order to understand the behaviour of tall columns, the run-out behaviour of a dense granular column with an initial aspect ratio of 6 is studied. The collapse behaviour is analysed for different slope angles: 0°, 2.5°, 5° and 7.5°.

  8. Biosolubilization of raw and gamma irradiated lignite by trichoderma asperellum

    International Nuclear Information System (INIS)

    Sugoro, I.; Astuti, D.I.; Aditiawati, P.; Sasongko, D.

    2012-01-01

    Biosolubilization is a promising technology for converting solid coal to liquid oil by addition of microorganism. Aim of this research is to compare between gamma irradiated lignite (10 kGy) with raw lignite in biosolubilization by selected fungi Trichoderma asperellum. Treatments were A (MSS + gamma irradiated lignite 5% + T. asperellum) and B (MSS + raw lignite 5% + T. asperellum) with sub-merged culture. There were two parameters observed i.e. biosolubilization product based on absorbance value at λ 250nm and λ 450nm and metal analysis by neutron activation analysis (NAA). The highest biosolubilization will be analyzed by FTIR and GCMS. The results showed that biosolubilization of raw lignite (B) was higher than sterilized lignite (A) based on absorbance value at λ 250nm and λ 450nm . The metal of lignite was decreased after incubation. FTIR analysis showed that both of treatment had similar spectra on biosolubilization products. GCMS analysis showed that both of treatment had different number of hydrocarbon, i.e. C 6 - C 35 (A) and C 10 - C 35 (B) and dominated by aromatic acids, aliphatic and phenylethers. Both of treatment product had the potency as oil substituted but its recommended to deoxygenate for higher quality. (author)

  9. Energies and raw materials. The energy situation

    International Nuclear Information System (INIS)

    1997-09-01

    Statistics are given on the energy and raw materials (coal, oil, etc.) production and consumption levels in France in September 1997: primary energy total consumption has increased (mobile year) of 1.1%, at the same rate since 3 years. Interior demand has varied depending on the energy: strong decrease for coal (- 5.9%), slight increase for petroleum products (+ 0.8%), strong increase for gas (+ 3.2%) and moderate increase for electricity (+ 1.7%). An increase in the dollar exchange rate and a high level of oil and gas imports have induced a record energy cost level with + 30% on one year, reaching 89.2 billions Francs, to be compared to 68.5 in September 1996

  10. Past, Present, and Future Production of Bio-oil

    Energy Technology Data Exchange (ETDEWEB)

    Steele, Philip; Yu, Fei; Gajjela, Sanjeev

    2009-04-01

    Bio-oil is a liquid product produced by fast pyrol-ysis of biomass. The fast pyrolysis is performed by heating the biomass rapidly (2 sec) at temperatures ranging from 350 to 650 oC. The vapors produced by this rapid heating are then condensed to produce a dark brown water-based emulsion composed of frag-ments of the original hemicellulose, cellulose and lignin molecules contained in the biomass. Yields range from 60 to 75% based on the feedstock type and the pyrolysis reactor employed. The bio-oil pro-duced by this process has a number of negative prop-erties that are produced mainly by the high oxygen content (40 to 50%) contributed by that contained in water (25 to 30% of total mass) and oxygenated compounds. Each bio-oil contains hundreds of chemi-cal compounds. The chemical composition of bio-oil renders it a very recalcitrant chemical compound. To date, the difficulties in utilizing bio-oil have limited its commercial development to the production of liq-uid smoke as food flavoring. Practitioners have at-tempted to utilize raw bio-oil as a fuel; they have also applied many techniques to upgrade bio-oil to a fuel. Attempts to utilize raw bio-oil as a combustion engine fuel have resulted in engine or turbine dam-age; however, Stirling engines have been shown to successfully combust raw bio-oil without damage. Utilization of raw bio-oil as a boiler fuel has met with more success and an ASTM standard has recently been released describing bio-oil characteristics in relation to assigned fuel grades. However, commercialization has been slow to follow and no reports of distribution of these bio-oil boiler fuels have been reported. Co-feeding raw bio-oil with coal has been successfully performed but no current power generation facilities are following this practice. Upgrading of bio-oils to hydrocarbons via hydroprocessing is being performed by several organizations. Currently, limited catalyst life is the obstacle to commercialization of this tech-nology. Researchers

  11. Process for desulfurizing shale oil, etc

    Energy Technology Data Exchange (ETDEWEB)

    Escherich, F

    1922-12-17

    A process is described for the desulfurizing of shale oil or tar, with recovery of valuable oils and hydrocarbons, characterized in that the raw material is heated in an autoclave to a pressure of 100 atmospheres or more.

  12. 21 CFR 178.3870 - Rosins and rosin derivatives.

    Science.gov (United States)

    2010-04-01

    ... color grade of K or paler. (ii) Wood rosin, refined to color grade of K or paler. (iii) Tall oil rosin, refined to color grade of K or paler. (iv) Dark tall oil rosin, a fraction resulting from the refining of tall oil rosin produced by multicolumnar distillation of crude tall oil to effect removal of fatty...

  13. Acute Toxicity of Castor Oil Bean Extract and Tolerance Level of ...

    African Journals Online (AJOL)

    The experiment was carried out to determine the acute toxicity of raw castor oil bean (Ricinus communis) extract and the tolerance level of raw castor oil bean by broilers. The seeds were ground, defatted with petroleum ether and the residue was subjected to extraction with phosphate-buffered saline. The extract volume ...

  14. The deep processing of oil residues conjunction with shales

    Directory of Open Access Journals (Sweden)

    Anatoly Maloletnev

    2012-12-01

    Full Text Available The results of studies on the development of a new process of thermal cracking of tar oil as a slurry with crushed oil shale to obtain components of motor fuels. The results suggest doubtless advantages of the process before the industrial of thermo cracking, since the single-stage processing of raw materials in relatively in the mild conditions (5 MPa, 425ºC, volumetric feed rate 1.0 h-1 is achieved deep destruction of tar oil (the yield petrol fraction with a bp amounts to up to 180ºC - ~12 mass % of middle distillates with a bp 180-360ºC – 43-44 mass %, of raw material for catalytic cracking of a bp 360-520ºC – ~15-16%, based on the initial tar oil. Formed like coke products and raw materials contained in V and Ni is postponed on the mineral part of slate and removed from the reaction zone with the liquid products of the process.

  15. Recent progress of seismic research on tall buildings in China Mainland

    Science.gov (United States)

    Lu, Xilin; Jiang, Huanjun

    2014-08-01

    As a result of rapid economic growth and urbanization in the past two decades, many tall buildings have been constructed in China Mainland, offering researchers and practitioners an excellent opportunity for research and practice in the field of structural engineering. This paper reviews progress by researchers throughout China Mainland on the seismic research of tall buildings, focusing on three major topics that impact the seismic performance of tall buildings. These are: (1) new types of steel-concrete composite structural members such as steel-concrete composite shear walls and columns, (2) earthquake resilient shear wall structures such as shear walls with replaceable structural components, self-centering shear walls and rocking walls, and (3) performance-based seismic design, including seismic performance index, performance level and design method. The paper concludes by presenting future research needs and directions in this field.

  16. Plastiliinipoisi pilgu läbi / Pärtel Tall

    Index Scriptorium Estoniae

    Tall, Pärtel

    2007-01-01

    Kunstnike rühmituse "Avangard" püsiinstallatsiooni ettevalmistamisest ja avamisest Tallinnas Kultuurikatlas. Tallinna Pedagoogikaülikooli kunstiõpetajana lõpetanud Pärtel Tall nukufilmide "Kõrbeorel" ja "Porgand" valmimisest, osalemisest performance'ides

  17. Fish oil extracted from fish-fillet by-products is weakly linked to the extraction temperatures but strongly linked to the omega-3 content of the raw material

    DEFF Research Database (Denmark)

    Honold, Philipp; Nouard, Marie-Louise; Jacobsen, Charlotte

    2016-01-01

    Rainbow trout (Oncorhynchus mykiss) is the mainspecies produced in Danish fresh water farming. Therefore, a large amount of fileting by-products like heads, bones, and tails (HBT) and intestines are available and can be used to produce high quality fish oil. The main aim in this study was to inve......Rainbow trout (Oncorhynchus mykiss) is the mainspecies produced in Danish fresh water farming. Therefore, a large amount of fileting by-products like heads, bones, and tails (HBT) and intestines are available and can be used to produce high quality fish oil. The main aim in this study...... products, % free fatty acids as well as content of omega-3 PUFA. Furthermore, an experiment was carried out to elucidate the effect of extraction temperature on oil produced from raw materials with a different content of omega-3 fatty acids. For this purpose filleting by-products from conventional (low...

  18. Systematic derivation of an Australian standard for Tall Man lettering to distinguish similar drug names.

    Science.gov (United States)

    Emmerton, Lynne; Rizk, Mariam F S; Bedford, Graham; Lalor, Daniel

    2015-02-01

    Confusion between similar drug names can cause harmful medication errors. Similar drug names can be visually differentiated using a typographical technique known as Tall Man lettering. While international conventions exist to derive Tall Man representation for drug names, there has been no national standard developed in Australia. This paper describes the derivation of a risk-based, standardized approach for use of Tall Man lettering in Australia, and known as National Tall Man Lettering. A three-stage approach was applied. An Australian list of similar drug names was systematically compiled from the literature and clinical error reports. Secondly, drug name pairs were prioritized using a risk matrix based on the likelihood of name confusion (a four-component score) vs. consensus ratings of the potential severity of the confusion by 31 expert reviewers. The mid-type Tall Man convention was then applied to derive the typography for the highest priority drug pair names. Of 250 pairs of confusable Australian drug names, comprising 341 discrete names, 35 pairs were identified by the matrix as an 'extreme' risk if confused. The mid-type Tall Man convention was successfully applied to the majority of the prioritized drugs; some adaption of the convention was required. This systematic process for identification of confusable drug names and associated risk, followed by application of a convention for Tall Man lettering, has produced a standard now endorsed for use in clinical settings in Australia. Periodic updating is recommended to accommodate new drug names and error reports. © 2014 John Wiley & Sons, Ltd.

  19. Energies and raw materials. The energy situation

    International Nuclear Information System (INIS)

    1997-11-01

    Statistics are given on the energy and raw materials (coal, oil, etc.) production and consumption levels in France in November 1997: primary energy total consumption has increased (mobile year) of 0.6%, at a slightly inferior rate than the rate since 3 years. Interior demand has varied depending on the energy: strong decrease for coal (- 9.3%), slight increase for petroleum products (+ 1.2%), markedly slowing down increase for gas (+ 1.4%) and moderate increase for electricity (+ 1.3%). An increase in the dollar exchange rate and a high level of oil and gas imports have induced a maintained high energy cost level with + 14% on one year, reaching 86.8 billions Francs, to be compared to 76.1 in November 1996

  20. The Making of a Liquid Soap Process From Used Wasted Cooking Oil and Coconut Oil Mixture

    OpenAIRE

    S.T., M.T., Zulkarnain

    2011-01-01

    This Moment, used frying oil has not been used well and only used discarded as household waste or industrial. Therefore, to use of used frying oil as raw material a liquid soap will provide added value for used frying oil. The main purpose of this research is to cultivative used frying oil become a liquid soap way saponification with potassium hidroxide . This research do with variation feed ratio that is used frying oil and coconut oil (0:1; 0,5:1; 1:1; 1,5:1; and 2:1) and time of saponifica...

  1. 1996 Activities report on energies and raw materials

    International Nuclear Information System (INIS)

    1996-01-01

    The 1996 activity survey of the French General Directory for Energy and Raw Materials, which main objectives are to preserve the competitiveness of French economy, enhance environmental protection, secure the long term supply safety and maintain the public service basis for energy supply, is presented. The main themes of the survey are: the nuclear safety in Eastern Europe, the electric power inland market, the evolution of the oil market in 1996, the situation of refining in France, restructuring the BRGM (Mining and Geological Research Bureau), followed by brief facts concerning the sustainable energy development, nuclear energy, electric power, electricity and gas common issues, gas, coal, petroleum products, raw materials and underground materials. A series of global diagrams concludes the survey

  2. Analysis of Ideal Towers for Tall Wind Applications

    Energy Technology Data Exchange (ETDEWEB)

    Dykes, Katherine L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Damiani, Rick R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Roberts, Joseph O [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Lantz, Eric J [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-01-12

    Innovation in wind turbine tower design is of significant interest for future development of wind power plants. First, wind turbine towers account for a large portion of overall capital expenditures for wind power projects. Second, for low wind-resource regions of the world, the use of low-cost tall-tower technology has the potential to open new markets for development. This study investigates the relative potential of various tower configurations in terms of mass and cost. For different market applications and hub heights, idealized tall towers are designed and compared. The results show that innovation in wind turbine controls makes reaching higher hub heights with current technology economically viable. At the same time, new technologies hold promise for reducing tower costs as these technologies mature and hub heights reach twice the current average.

  3. Raman detection of extra virgin olive oil adulterated with cheaper oils

    Science.gov (United States)

    Farley, Carlton; Kassu, Aschalew; Mills, Jonathan; Kenney, Brianna; Ruffin, Paul; Sharma, Anup

    2016-09-01

    Pure extra virgin olive oil (EVOO) is mixed with cheaper edible oils and samples are kept inside clear glass containers, while a 785nm Raman system is used to take measurements as Raman probe is placed against glass container. Several types of oils at various concentrations of adulteration are used. Ratios of peak intensities are used to analyze raw data, which allows for quick, easy, and accurate analysis. While conventional Raman measurements of EVOO may take as long as 2 minutes, all measurements reported here are for integration times of 15s. It is found that adulteration of EVOO with cheaper oils is detectable at concentrations as low as 5% for all oils used in this study.

  4. Coated kapok fiber for removal of spilled oil

    International Nuclear Information System (INIS)

    Wang, Jintao; Zheng, Yian; Wang, Aiqin

    2013-01-01

    Highlights: ► A low-cost and biodegradable oil absorbent based on kapok fiber was prepared. ► The polymer-coated kapok fiber showed higher oil sorption capacity. ► Coated kapok fiber can be reused and the absorbed oil can be easily recovered. ► Adsorption of oil is spontaneous and exothermic physisorption and chemisorption. -- Abstract: Based on raw kapok fiber, two kinds of oil absorbers with high sorption capacity were prepared by a facile solution–immersion process. The coated polymer with low surface energy and rough fiber surface play important role in the retention of oil. The as-prepared fiber can quickly absorb gasoline, diesel, soybean oil, and paraffin oil up to above 74.5%, 66.8%, 64.4% and 47.8% of oil sorption capacity of raw fiber, respectively. The absorbed oils can be easily recovered by a simple vacuum filtration and the recovered coated-fiber still can be used for several cycles without obvious loss in oil sorption capacity. The thermodynamic study indicates that the adsorption process is spontaneous and exothermic, with complex physisorption and chemisorption. The results suggest that the coated fiber can be used as a low-cost alternative for the removal of oil spilled on water surface

  5. Characterization of Epichloë coenophiala within the U.S.: are all tall fescue endophytes created equal?

    Science.gov (United States)

    Young, Carolyn; Charlton, Nikki; Takach, Johanna; Swoboda, Ginger; Trammell, Michael; Huhman, David; Hopkins, Andrew

    2014-11-01

    Tall fescue (Lolium arundinaceum) is a valuable and broadly adapted forage grass that occupies approximately 14 million hectares across the United States. A native to Europe, tall fescue was likely introduced into the U.S. around the late 1800’s. Much of the success of tall fescue can be attributed to Epichloë coenophiala (formerly Neotyphodium coenophialum) a seed borne symbiont that aids in host persistence. Epichloë species are capable of producing a range of alkaloids (ergot alkaloids, indole-diterpenes, lolines and peramine) that provide protection to the plant host from herbivory. Unfortunately, most tall fescue within the U.S., commonly referred to as KY31, harbors the endophyte E. coenophiala that causes toxicity to grazing livestock due to the production of ergot alkaloids. Molecular analyses of tall fescue endophytes have identified four independent associations, representing tall fescue with E. coenophiala, Epichloë sp. FaTG-2, Epichloë sp. FaTG-3 or Epichloë sp. FaTG-4. Each of these Epichloë species can be further distinguished based on genetic variation that equates to differences in the alkaloid gene loci. Tall fescue samples were evaluated using markers to SSR and alkaloid biosynthesis genes to determine endophyte strain variation present within continental U.S. Samples represented seed and tillers from the Suiter farm (Menifee County, KY), which is considered the originating site of KY31, as well as plant samples collected from 14 states, breeder’s seed and plant introduction lines (National Plant Germplasm System, NPGS). This study revealed two prominent E. coenophiala genotypes based on presence of alkaloid biosynthesis genes and SSR markers and provides insight into endophyte variation within continental U.S. across historical and current tall fescue samples.

  6. Thermogravimetric investigation on the degradation properties and combustion performance of bio-oils.

    Science.gov (United States)

    Ren, Xueyong; Meng, Jiajia; Moore, Andrew M; Chang, Jianmin; Gou, Jinsheng; Park, Sunkyu

    2014-01-01

    The degradation properties and combustion performance of raw bio-oil, aged bio-oil, and bio-oil from torrefied wood were investigated through thermogravimetric analysis. A three-stage process was observed for the degradation of bio-oils, including devolatilization of the aqueous fraction and light compounds, transition of the heavy faction to solid, and combustion of carbonaceous residues. Pyrolysis kinetics parameters were calculated via the reaction order model and 3D-diffusion model, and combustion indexes were used to qualitatively evaluate the thermal profiles of tested bio-oils for comparison with commercial oils such as fuel oils. It was found that aged bio-oil was more thermally instable and produced more combustion-detrimental carbonaceous solid. Raw bio-oil and bio-oil from torrefied wood had comparable combustion performance to fuel oils. It was considered that bio-oil has a potential to be mixed with or totally replace the fuel oils in boilers. Copyright © 2013 Elsevier Ltd. All rights reserved.

  7. Volatile Constituents of Valeriana hardwickii Wall. Root Oil from Arunachal Pradesh, Eastern Himalaya

    Directory of Open Access Journals (Sweden)

    Jayashankar Das

    2011-01-01

    Full Text Available The composition of the essential oil extracted from Valeriana hardwickii Wall. roots growing wild in Talle Valley of Arunachal Pradesh, Eastern Himalaya was analyzed by capillary GC and GC/MS. Thirty-one compounds representing 89.6% of the total oil were identified. The oil was found to be rich in sesquiterpenes from which oxygenated sesquiterpenes (25.7%. Methyl linoleate (21.1% and Valeracetate (11.6% were the major constituents present in the oil. Whereas, Bornyl acetate (11.2% and α-Terpinyl acetate (4.7% were the only oxygenated monoterpenes identified in the investigated sample. Essential oil and its constituents of V. hardwickii may be used as the substitute of highly traded Indian Valerian (V. jatamansi and European V. officinalis.

  8. 75 FR 18451 - Safety and Security Zones; Tall Ships Challenge 2010, Great Lakes; Cleveland, OH; Bay City, MI...

    Science.gov (United States)

    2010-04-12

    ...-AA87 Safety and Security Zones; Tall Ships Challenge 2010, Great Lakes; Cleveland, OH; Bay City, MI.... SUMMARY: The Coast Guard proposes to establish temporary safety and security zones around each Tall Ship visiting the Great Lakes during the Tall Ships Challenge 2010 race series. These safety and security zones...

  9. Refining mineral oils

    Energy Technology Data Exchange (ETDEWEB)

    1946-07-05

    A process is described refining raw oils such as mineral oils, shale oils, tar, their fractions and derivatives, by extraction with a selected solvent or a mixture of solvents containing water, forming a solvent more favorable for the hydrocarbons poor in hydrogen than for hydrocarbons rich in hydrogen, this process is characterized by the addition of an aiding solvent for the water which can be mixed or dissolved in the water and the solvent or in the dissolving mixture and increasing in this way the solubility of the water in the solvent or the dissolving mixture.

  10. Reverse engineering of TLX oncogenic transcriptional networks identifies RUNX1 as tumor suppressor in T-ALL.

    Science.gov (United States)

    Della Gatta, Giusy; Palomero, Teresa; Perez-Garcia, Arianne; Ambesi-Impiombato, Alberto; Bansal, Mukesh; Carpenter, Zachary W; De Keersmaecker, Kim; Sole, Xavier; Xu, Luyao; Paietta, Elisabeth; Racevskis, Janis; Wiernik, Peter H; Rowe, Jacob M; Meijerink, Jules P; Califano, Andrea; Ferrando, Adolfo A

    2012-02-26

    The TLX1 and TLX3 transcription factor oncogenes have a key role in the pathogenesis of T cell acute lymphoblastic leukemia (T-ALL). Here we used reverse engineering of global transcriptional networks to decipher the oncogenic regulatory circuit controlled by TLX1 and TLX3. This systems biology analysis defined T cell leukemia homeobox 1 (TLX1) and TLX3 as master regulators of an oncogenic transcriptional circuit governing T-ALL. Notably, a network structure analysis of this hierarchical network identified RUNX1 as a key mediator of the T-ALL induced by TLX1 and TLX3 and predicted a tumor-suppressor role for RUNX1 in T cell transformation. Consistent with these results, we identified recurrent somatic loss-of-function mutations in RUNX1 in human T-ALL. Overall, these results place TLX1 and TLX3 at the top of an oncogenic transcriptional network controlling leukemia development, show the power of network analyses to identify key elements in the regulatory circuits governing human cancer and identify RUNX1 as a tumor-suppressor gene in T-ALL.

  11. Globalisation Reflected onto Architecture: Tall Buildings of Ankara-Turkey

    Science.gov (United States)

    Tanju Gültekin, Ahmet

    2017-10-01

    Policy switching, radical socioeconomic changes, integration and globalisation were started in 1980s. New urban space developments have been accelerated in 1990s and provided urban space identity policies in 2000s. Luxurious shopping malls, hotels, and ultra-posh residences within the city and gated communities on city peripheries have been formed. Thus, the urban geography, urban silhouette and urban identity are being converted through tall buildings that signify the created prestige, status, and power in competition with the global capital. By the globalisation foresight the cities which have gotten ahead of the nation-state was seen. The buildings that converted into a symbolic (iconic) global product leads to an advantage in the race for attracting global investments and tourism, on behalf of the cities/urban districts. This process, which was initiated haphazardly in Turkey in the 1980s, has been on-going throughout the 1990s and especially in 2000s by means of the re-structuring of the government on a neo-liberal basis. The process is concurrently observable through the tall buildings and/or building blocks which match with urban regeneration projects, urban zoning plan revisions and fragmented zoning plans. In this study, the new global world order is evaluated by their status and architectural properties of selected tall and iconic/ultra-modern buildings in Ankara.

  12. Ajaloomuuseumi hoovil laguneb kaitsealune tall / Juhan Mellik

    Index Scriptorium Estoniae

    Mellik, Juhan

    2010-01-01

    Ajaloomuuseumile kuuluv 19. sajandist pärit Maarjamäe suvemõisa tall on hävimisohus, sest hoone katusetalad on mädanenud. Laguneb ka Maarjamäe lossikompleksi juurde viiv trepistik. Tallinna kultuuriväärtuste ameti muinsuskaitse osakonna juhataja Boris Duboviku ja peaspetsialist Oliver Orro ning kultuuriministeeriumi riigivarabüroo juhataja Andres Nõlve arvamus

  13. Notice of release of Syn1 Tall Fescue

    Science.gov (United States)

    The Agricultural Research Service, U.S. Department of Agriculture announces the release of Syn1 tall fescue [Festuca arundinacea (syn., Lolium arundinaceum Darbyshire; Schedonorus phoenix (Scop.) Holub)] (PI xxxx, PI xxxx) germplasm developed by Dr. Bryan K. Kindiger at the USDA-ARS Grazinglands Res...

  14. Relative effectiveness of sewage sludge as a nitrogen fertilizer for tall fescue

    Energy Technology Data Exchange (ETDEWEB)

    Kiemnec, G.L.; Jackson, T.L.; Hemphill, D.D. Jr.; Volk, V.V.

    Sewage sludge application rates on grasses are mainly determined by N availability and concentration of toxic metals in sludge. The exact availability of N in sludge is difficult to predict. A 3-yr study was conducted to determine which sludge rates would give yields of tall fescue (Festuca arundinacea Shreb. Alta) comparable to yields obtained from inorganic N application. Sludge and NH/sub 4/NO/sub 3/ were surface applied at annual rates of 0, 110, 220, 440, and 880 (sludge only) kg N/ha. Dry matter yield of tall fescue from sludge-treated soils was 36, 56, and 50% of that on NH/sub 4/NO/sub 3/-treated soils for 1976, 1977, and 1978, respectively. Sludge was 27, 41, and 44% as effective as NH/sub 4/NO/sub 3/ as a source of available N in 1976, 1977, and 1978, respectively. Ammonium-N in the sewage sludge apparently provided most of the available N for fescue growth. Concentrations of Zn, Cd, and Cu were higher and Mn lower in tall fescue grown on sludge-treated soil with NH/sub 4/NO/sub 3/ and usually increased toward the end of the growing season. However, plant concentrations of these heavy metals never reached toxic levels at any time. Sewage sludge was an effective and safe nutrient source for tall fescue.

  15. Analysis of Ideal Towers for Tall Wind Applications: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Dykes, Katherine L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Damiani, Rick R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Roberts, Joseph O [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Lantz, Eric J [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-02-27

    Innovation in wind turbine tower design is of significant interest for future development of wind power plants. First, wind turbine towers account for a large portion of overall capital expenditures for wind power projects. Second, for low wind-resource regions of the world, the use of low-cost tall-tower technology has the potential to open new markets for development. This study investigates the relative potential of various tower configurations in terms of mass and cost. For different market applications and hub heights, idealized tall towers are designed and compared. The results show that innovation in wind turbine controls makes reaching higher hub heights with current technology economically viable. At the same time, new technologies hold promise for reducing tower costs as these technologies mature and hub heights reach twice the current average.

  16. [Efficiency evaluation of capsaicinoids to discriminate bio-waste oils from edible vegetable oils].

    Science.gov (United States)

    Mao, Lisha; Liu, Honghe; Kang, Li; Jiang, Jie; Liao, Shicheng; Liu, Guihua; Deng, Pingjian

    2014-07-01

    To evaluate the efficiency of capsaicinoids to discriminate bio-waste oil from edible vegetable oil. 14 raw vegetable oils, 24 fried waste oils, 34 kitchen-waste oils, 32 edible non-peanut vegetable oil, 32 edible peanuts oil, 16 edible oil add flavorand and 11 refined bio-waste oils were prepared and examined for capsaicinoids including capsaicin, dihydrocapsaicin and nonylic acid vanillylamide. The detection results of the above samples were statistically tested based on sample category to assessment identify the effectiveness of the bio-waste oils with capsaicinoids. As a indicator, capsaincin was possessed of high detection sensitivity and has the highest efficiency to discern kitchen-waste oils and refined bio-waste oils samples from edible non-peanut vegetable oil correctly. The accuracy rate of identification were 100% and 90.1% respectively. There is the background in peanut oil. CONCLUSION Capsaicin added in cooking process can be retained in the refining process and hardly be removed in the refining process. In the case of fully eliminating the background interference, capsaicinoids can effectively identify bio-waste oils and edible vegetable oil in combination.

  17. Design automation of load-bearing arched structures of roofs of tall buildings

    Science.gov (United States)

    Kulikov, Vladimir

    2018-03-01

    The article considers aspects of the possible use of arched roofs in the construction of skyscrapers. Tall buildings experience large load from various environmental factors. Skyscrapers are subject to various and complex types of deformation of its structural elements. The paper discusses issues related to the aerodynamics of various structural elements of tall buildings. The technique of solving systems of equations state method of Simpson. The article describes the optimization of geometric parameters of bearing elements of the arched roofs of skyscrapers.

  18. Transcriptional activation of prostate specific homeobox gene NKX3-1 in subsets of T-cell lymphoblastic leukemia (T-ALL.

    Directory of Open Access Journals (Sweden)

    Stefan Nagel

    Full Text Available Homeobox genes encode transcription factors impacting key developmental processes including embryogenesis, organogenesis, and cell differentiation. Reflecting their tight transcriptional control, homeobox genes are often embedded in large non-coding, cis-regulatory regions, containing tissue specific elements. In T-cell acute lymphoblastic leukemia (T-ALL homeobox genes are frequently deregulated by chromosomal aberrations, notably translocations adding T-cell specific activatory elements. NKX3-1 is a prostate specific homeobox gene activated in T-ALL patients expressing oncogenic TAL1 or displaying immature T-cell characteristics. After investigating regulation of NKX3-1 in primary cells and cell lines, we report its ectopic expression in T-ALL cells independent of chromosomal rearrangements. Using siRNAs and expression profiling, we exploited NKX3-1 positive T-ALL cell lines as tools to investigate aberrant activatory mechanisms. Our data confirmed NKX3-1 activation by TAL1/GATA3/LMO and identified LYL1 as an alternative activator in immature T-ALL cells devoid of GATA3. Moreover, we showed that NKX3-1 is directly activated by early T-cell homeodomain factor MSX2. These activators were regulated by MLL and/or by IL7-, BMP4- and IGF2-signalling. Finally, we demonstrated homeobox gene SIX6 as a direct leukemic target of NKX3-1 in T-ALL. In conclusion, we identified three major mechanisms of NKX3-1 regulation in T-ALL cell lines which are represented by activators TAL1, LYL1 and MSX2, corresponding to particular T-ALL subtypes described in patients. These results may contribute to the understanding of leukemic transcriptional networks underlying disturbed T-cell differentiation in T-ALL.

  19. Earthquake disaster simulation of civil infrastructures from tall buildings to urban areas

    CERN Document Server

    Lu, Xinzheng

    2017-01-01

    Based on more than 12 years of systematic investigation on earthquake disaster simulation of civil infrastructures, this book covers the major research outcomes including a number of novel computational models, high performance computing methods and realistic visualization techniques for tall buildings and urban areas, with particular emphasize on collapse prevention and mitigation in extreme earthquakes, earthquake loss evaluation and seismic resilience. Typical engineering applications to several tallest buildings in the world (e.g., the 632 m tall Shanghai Tower and the 528 m tall Z15 Tower) and selected large cities in China (the Beijing Central Business District, Xi'an City, Taiyuan City and Tangshan City) are also introduced to demonstrate the advantages of the proposed computational models and techniques. The high-fidelity computational model developed in this book has proven to be the only feasible option to date for earthquake-induced collapse simulation of supertall buildings that are higher than 50...

  20. Tall fescue ergot alkaloids are vasoactive in equine vasculature

    Science.gov (United States)

    Mares grazing endophyte-infected (Epichloë coenophiala) tall fescue (Lolium arundinaceum) typically exhibit reproductive dysfunction rather than problems associated with peripheral vasoconstriction as a primary sign of the fescue toxicosis syndrome. Research using Doppler ultrasonography demonstrate...

  1. Evaluation of the biodiesel production using three sources of raw material and ethanol

    Energy Technology Data Exchange (ETDEWEB)

    Radecki, Angela Patricia; Fracaro, Cristiane; Gnoatto, Estor; Kavanagh, Edward; Anami, Marcelo Hidemassa; Fischborn, Marcos; Lobo, Viviane da Silva [Universidade Tecnologica Federal do Parana (UTFPR), Medianeira, PR (Brazil)], E-mail: mhanami@utfpr.edu.br; Zara, Ricardo Fiori [Prati Donaduzzi e Cia. Ltda., Toledo, PR (Brazil)

    2008-07-01

    The conversion of different oils in ethyl ester (biodiesel) through the transesterification with anhydrous ethanol, together with its quality and its consumption in mixture with diesel of petroleum in different ratios, they were evaluated using a stationary diesel engine connected to an electric energy generator. The raw materials used in this transformation were oil of refined soybean, oil of refined sunflower and animal fat (swine). In the transesterification reaction it was used an alkaline catalyst (sodium hydroxide), because of its proven effectiveness and the high speed facing other catalyst, beyond being less corrosive and demands less molar' reasons between the alcohol and the vegetal oil. The tests in stationary diesel engine were carried through the dilutions of 0%, 5%, 10%, 15% and 20% of biodiesel produced in mixture with diesel of petroleum. The results showed that the yield of biodiesel gotten by different sources is satisfactory. It was also observed that the basic catalysis is adjusted to the production of biodiesel from raw materials with low acidity. The tests in diesel engine appeared to be sufficiently satisfactory once it was not observed any alteration in the functioning of the engine. The consumption was also not modified by the studied dilutions, demonstrating that the biodiesel can be added to the pure diesel reducing the use of the fuel derived from petroleum. (author)

  2. THE IMPACT OF OIL POLLUTION OF THE MARINE ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Jelena Markovic

    2014-10-01

    Full Text Available Water is a unique component of nature, without which one can not imagine the origin and existence of life, while the well, which can be disposed of and that can be cashed. Oil and its derivatives are often pollute the waters of the sea and the ocean, directly in the exploitation and transport, and indirectly, processing and use. Oil is the energy on a large number of technological processes, as well as the raw material base of the organic chemical industry, and in addition large quantities of petroleum products consumed as fuel for motor vehicles. This wide and varied use of oil makes an important raw material and potential water pollutants seas and oceans.

  3. Inhibition of IGF1-R overcomes IGFBP7-induced chemotherapy resistance in T-ALL

    International Nuclear Information System (INIS)

    Bartram, Isabelle; Erben, Ulrike; Ortiz-Tanchez, Jutta; Blunert, Katja; Schlee, Cornelia; Neumann, Martin; Heesch, Sandra; Baldus, Claudia D.

    2015-01-01

    T-cell acute lymphoblastic leukemia (T-ALL) is a genetically heterogeneous disease with the need for treatment optimization. Previously, high expression of Insulin-like growth factor binding protein 7 (IGFBP7), a member of the IGF system, was identified as negative prognostic factor in adult T-ALL patients. Since aberrant IGFBP7 expression was observed in a variety of neoplasia and was relevant for prognosis in T-ALL, we investigated the functional role of IGFBP7 in Jurkat and Molt-4 cells as in vitro models for T-ALL. Jurkat and Molt-4 cells were stably transfected with an IGFBP7 over-expression vector or the empty vector as control. Proliferation of the cells was assessed by WST-1 assays and cell cycle status was measured by flow-cytometry after BrDU/7-AAD staining. The effect of IGFBP7 over-expression on sensitivity to cytostatic drugs was determined in AnnexinV/7-AAD assays. IGF1-R protein expression was measured by Western Blot and flow-cytometric analysis. IGF1-R associated gene expression profiles were generated from microarray gene expression data of 86 T-ALL patients from the Microarrays Innovations in Leukemia (MILE) multicenter study. IGFBP7-transfected Jurkat cells proliferated less, leading to a longer survival in a nutrient–limited environment. Both IGFBP7-transfected Jurkat and Molt-4 cells showed an arrest in the G0/G1 cell cycle phase. Furthermore, Jurkat IGFBP7-transfected cells were resistant to vincristine and asparaginase treatment. Surface expression and whole protein measurement of IGF1-R protein expression showed a reduced abundance of the receptor after IGFBP7 transfection in Jurkat cells. Interestingly, combination of the IGF1-R inhibitor NPV-AEW541 restored sensitivity to vincristine in IGFBP7-transfected cells. Additionally, IGF1-R associated GEP revealed an up-regulation of important drivers of T-ALL pathogenesis and regulators of chemo-resistance and apoptosis such as NOTCH1, BCL-2, PRKCI, and TP53. This study revealed a

  4. THE WORLD OIL MARKET – STATISTICAL ANALYSIS

    Directory of Open Access Journals (Sweden)

    Alexandru AnaMaria

    2009-05-01

    Full Text Available For some countries the oil is the main source of income, while for others it represents the main raw material for energetic needs. Thus, the oil price has major influence on their economies and it is important for them that it stabilizes at a level profit

  5. Mackerel (Scomber Scrombrus Oil Extraction and Evaluation as Raw Materials for Industrial Utilization

    Directory of Open Access Journals (Sweden)

    A. A. BAWA

    2006-01-01

    Full Text Available The extraction, evaluation and refining of fish oil from mackerel (scomber scrombrus has been conducted in this work. The total percentage oil yield using solvent extraction and total moisture content was 28.24% and 56.50 %respectively, which were found to increase linearly with time. The analytical properties of the crude and the refined oil were evaluated. It was observed that the crude oil consist from: acid value 2.5 mg/KOH, peroxide value 2.19 mEq/kg, saponification value 201.6 mgKOH/g, iodine value 108.09 I2/100g, specific gravity 0.911, refractive index 1.485 and reddish brown colour. The refined oil was also evaluated as follows: acid value 2.27 mg/KOH, peroxide 1.00 meq/kg, saponification value 147.84 mgKOH/g, iodine value 106.93 I2 /100g and golden brown colour. These values fall within the acceptable standard values. The refining of the oil brought about a notable improvement in the analytical properties of the oil. Thus, leads to a high quality fish oil in terms of the taste, colour, odours, shelf life and market value. Based on the improved characteristics of the oil, it could be suitable for applications in pharmaceutical and food industries.

  6. Fungicidal values of bio-oils and their lignin-rich fractions obtained from wood/bark fast pyrolysis.

    Science.gov (United States)

    Mohan, Dinesh; Shi, Jenny; Nicholas, Darrel D; Pittman, Charles U; Steele, Philip H; Cooper, Jerome E

    2008-03-01

    Pine wood, pine bark, oak wood and oak bark were pyrolyzed in an auger reactor. A total of 16 bio-oils or pyrolytic oils were generated at different temperatures and residence times. Two additional pine bio-oils were produced at the National Renewable Energy Laboratory in a fluidized-bed reactor at different temperatures. All these bio-oils were fractionated to obtain lignin-rich fractions which consist mainly of phenols and neutrals. The pyrolytic lignin-rich fractions were obtained by liquid-liquid extraction. Whole bio-oils and their lignin-rich fractions were studied as potential environmentally benign wood preservatives to replace metal-based CCA and copper systems that have raised environmental concerns. Each bio-oil and several lignin-rich fractions were tested for antifungal properties. Soil block tests were conducted using one brown-rot fungus (Gloeophyllum trabeum) and one white-rot fungus (Trametes versicolor). The lignin-rich fractions showed greater fungal inhibition than whole bio-oils for a impregnation solution 10% concentration level. Water repellence tests were also performed to study wood wafer swelling behavior before and after bio-oil and lignin-rich fraction treatments. In this case, bio-oil fractions did not exhibit higher water repellency than whole bio-oils. Comparison of raw bio-oils in soil block tests, with unleached wafers, at 10% and 25% bio-oil impregnation solution concentration levels showed excellent wood preservation properties at the 25% level. The good performance of raw bio-oils at higher loading levels suggests that fractionation to generate lignin-rich fractions is unnecessary. At this more effective 25% loading level in general, the raw bio-oils performed similarly. Prevention of leaching is critically important for both raw bio-oils and their fractions to provide decay resistance. Initial tests of a polymerization chemical to prevent leaching showed some success.

  7. LQG Control of Along-Wind Response of a Tall Building with an ATMD

    Directory of Open Access Journals (Sweden)

    Ki-Pyo You

    2014-01-01

    Full Text Available Modern tall buildings use lighter construction materials that have high strength and less stiffness and are more flexible. Although this results in the improvement of structural safety, excessive wind-induced excitations could lead to occupant discomfort. The optimal control law of a linear quadratic Gaussian (LQG controller with an active tuned mass damper (ATMD is used for reducing the along-wind response of a tall building. ATMD consists of a second mass with optimum parameters for tuning frequency and damping ratio of the tuned mass damper (TMD, under the stationary random load, was used. A fluctuating along-wind load, acting on a tall building, was treated as a stationary Gaussian white noise and was simulated numerically, in the time domain, using the along-wind load spectra proposed by G. Solari in 1993. Using this simulated wind load, it was possible to calculate the along-wind responses of a tall building (with and without the ATMD, using an LQG controller. Comparing the RMS (root mean square response revealed that the numerically simulated along-wind responses, without ATMD, are a good approximation to the closed form response, and that the reduced responses with ATMD and LQG controller were estimated by varying the values of control design parameters.

  8. Pengaruh proses oil terhadap tegangan putus dan perpanjangan putus karet untuk komponen pompa air tangan

    Directory of Open Access Journals (Sweden)

    Siti Rochani

    1996-12-01

    Full Text Available The objective of this research is to know influence of process oil to the physical properties tensile strength and elongation at break of rubber compound for hand water pump. Vulcanized rubber makes from Rubber Smoke Sheet (RSS and Styrene Butadiene Rubber (SBR 1502 as raw material. Ingredient which added to raw material were Paraffin Wax, Strearic Acid, ZnO, CaCO3, Carbon Black, Process Oil, CBS, TMT, AOSP and Sulphur. Raw material rubber and ingredient were compounded in a two roll mill and formed to slab by hydraulic press at temperature 1500C and pressure 150 kg/cm2. It should be carry out by varying process oil 3 – 9 part by weight raw material. The compound was tested tensile strength and elongation at break. The result of this research indicated that process oil (X1 and tensile strength (Y1 have regression equation as Y1 = 235,697 – 8,33 X (correlation coeffisien = 0,72 while process oil and elongation at break has regression equation as Y2 = 251,64 + 12,75 X (correlation coeffisien = 0,97.

  9. Chemical composition and nutritive value of irrigated tall fescue ...

    African Journals Online (AJOL)

    in ruminant feeds may be in the form of simple organic compounds or inorganic compounds .... Other researchers (Blaser et al., 1969) have found that cows grazing tall fescue without ... Official methods of analysis (13th edn.). Association of.

  10. Trials with TALL-1O4 Cells for Treatment of Metastatic Breast Cancer

    Science.gov (United States)

    1999-10-01

    Cesano, A.*, Jeglum, K. A., and Santoli, D. Adjuvant treatment of canine osteosarcoma with the human cytotoxic T cell line TALL-104. Clin. Cancer... canine malignant histiocytosis with the human MHC non-restricted cytotoxic T cell line TALL-104. Clin. Cancer Res., 3: 1789-1797, 1997. 14. Visonneau, S...Visonneau, S., Cesano, A., Jeglum, K. A., and Santoli, D. Adoptive therapy of canine metastatic mammary carcinoma with the human MHC non-restricted

  11. Determination of ultraviolet filter activity on coconut oil cosmetic cream

    Science.gov (United States)

    Widiyati, Eni

    2017-08-01

    A research on determination of ultraviolet (UV) filter activity of cosmetic cream with coconut oil as raw material has been done. The cream was made by mixing the oil phase (coconut oil, stearic acid, lanolin and cetyl alcohol) at 70°C and the water phase (glycerin, aquadest and triethanolamine) at 70°C, while stirring until reached a temperature of 35°C. It was made also a cream with inorganic sunscreen TiO2 and organic sunscreen benzophenone-3 as a comparison. To study the UV filter activity, each cream was determined the UV absorption using UV spectrophotometer. The results show that cosmetic cream with coconut oil as raw material absorbs UV rays in the region of UV-C, whereas the cream with TiO2 absorbs the UV rays from UV-C to UV-A and cream with benzophenone-3 absorbs the UV rays from UV-B to UV-A region. This means that, the cosmetic cream with coconut oil as raw material has an activity as UV-C filter. If this cream is expected to have an activity as a sunscreen, it must be added an inorganic or organic sunscreen or a mixture of both as an active materials.

  12. Irradiation as an alternative environmentally friendly method for microbiological decontamination of herbal raw material

    International Nuclear Information System (INIS)

    Dragusin, M.; Rotaru, R.

    2000-01-01

    Microbiological contamination of herbal raw materials is a serious problem in the production of therapeutical preparations. A good quality of the product, according to the pharmaceutical requirements may be achieved by applying suitable methods of decontamination. The decontamination treatments should be fast and effective against all microorganisms. It should ensure the decontamination of both packaging and the microorganisms present and must not reduce the sensory and technological qualities of the commodities. Decontamination of herbal raw materials by irradiation is a method by choice. It is because chemical methods are recognized recently as not safe to the consumer. Irradiation, in turn, is technically feasible, very effective and friendly enough to environment process. Under the prevailing production and handling conditions, most herbs contain a large number of microorganisms what is a serious problem in the production of therapeutical preparations. For several years the most widely used methods for decontamination of herbs was fumigation with ethylene oxide or methyl bromide. Both methods today banned in most countries. Irradiation is an alternative and safe method for effective reducing the microbial contamination of herbal raw materials. The following raw materials have been examined: Folium Cynara, Folium Plantago, Flos Chamomillae, Semen Sylibum Marianum and Folium Farfara. The content of biologically active compounds before and after irradiation of the raw materials did not change in a significant degree after irradiation. The dose of radiation for herbals raw materials was 10 kGy. There are two groups of raw materials: - The raw materials designed for preparing granulates, tablets, dragees, capsules, aqueous extracts, infusions, macerations and preparations for external use; - The raw materials assigned for preparing alcoholic preparations, isolated compounds, oil preparations and essential oils. The medical herbs and herbal raw materials before their

  13. Partially acetylated sugarcane bagasse for wicking oil from contaminated wetlands

    Energy Technology Data Exchange (ETDEWEB)

    Chung, S. [Samsung Engineering Co. Ltd., R and D Center, Suwon, Gyeonggi (Korea, Republic of); Suidan, M.T. [University of Cincinnati, School of Energy, Environmental, Biological and Medical Engineering, Cincinnati, OH (United States); Venosa, A.D. [NRMRL, U.S. EPA, Cincinnati, OH (United States)

    2011-12-15

    Sugarcane bagasse was partially acetylated to enhance its oil-wicking ability in saturated environments while holding moisture for hydrocarbon biodegradation. The water sorption capacity of raw bagasse was reduced fourfold after treatment, which indicated considerably increased hydrophobicity but not a limited capability to hold moisture for hydrocarbon biodegradation. Characterization results by Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and surface area analyzer suggested that treated bagasse exhibited enhanced hydrophobicity and surface area. Oil wicking test results indicate that treated bagasse is more effective in wicking oil from highly saturated environments than raw bagasse and suggest that application of this material in remediation of oil spills in highly saturated wetlands is promising. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  14. Glances on the year 1998. Energies and raw materials

    International Nuclear Information System (INIS)

    1999-01-01

    This report summarizes 14 key-topics of the year 1998 in relation with the French energy and economic policy: the new start-up of energy mastery; the nuclear industry between passion and reason; the labour inspection in nuclear power plants; the law project for the modernizing and development of the electric power public utility; the main gas transportation systems; the future of Gardanne's mining basin; the raw materials in the upheaval; the French refining activity after the Auto-Oil directive; the oil company fusions; the priorities in petroleum technology research; the policy of automotive fuels distribution; the energy in regions; the mining activity in New Caledonia; the end of the BRGM-Normandy partnership. A calendar of remarkable facts is given at the end. (J.S.)

  15. Prospects for the exploitation of Jordan oil shale

    International Nuclear Information System (INIS)

    Jaber, J.O; Probert, S.D.; Badr, O.

    1997-01-01

    Oil shale is the major indigenous fossil-fuel in Jordan: its predicted reserves, of about 5·10 1 0 tonnes, should be sufficient to satisfy Jordan's energy requirements for several centuries. Jordanian oil shale has, on an average, a gross calorific value of between 5 and 7 MJ/kg, an oil yield of ∼ 10 %, and a sulfur content of approximately 3 % by weight of the raw shale (i.e. 7 to 9 % of the organic matter content). Using the oil shale as the input fuel, a multipurpose production process (i.e. retorting, electricity generation, thermal water-desalination, chemicals production as well as mineral extraction) could achieve high utilisation-factors of both its chemical and energy potentials. In the long-term, oil shale is the only indigenous energy resource that could reduce Jordan's dependence on imported crude oil and hence ease the pressure on the national economy. The conversion of oil shale into a liquid or gaseous fuel and raw materials will be of decisive importance in attempts to secure the future of energy supplies. So national efforts devoted to the exploration for, and harnessing more economically, this energy resource, while limiting the associated adverse environmental impacts, should be accelerated. (author)

  16. Influence of the processed sunflower oil on the cement properties

    Science.gov (United States)

    Fleysher, A. U.; Tokarchuk, V. V.; Sviderskiy, V. A.

    2015-01-01

    Used oils (vegetable oil, animal oil, engine oil, etc.), which are essentially industrial wastes, have found application as secondary raw materials in some braches of industry. In particular, the only well-known and commonly-used way of utilizing wastes of vegetable oils is to apply them as raw materials in the production of biodiesel. The goal of the present study is to develop a conceptually new way of vegetable oil wastes utilization in the building industry. The test admixture D-148 was obtained from the processing of wastes of sunflower oil and it mainly consists of fatty acid diethanolamide. The test admixture was added to the cement system for the purpose of studying its influence on water demand, flowability, setting times, compressive strength and moisture adsorption. The test admixture D-148 at the optimal content 0. 2 weight % causes 10% decrease in water demand, 1.7 time increase in flowability (namely spread diameter), 23% increase in grade strength and 34% decrease in moisture adsorption. The results of the present investigation make it possible to consider the final product of the waste sunflower oil processing as multifunctional plasticizing-waterproofing admixture.

  17. Modification of the process for separating and recovering oil from oil-sands, etc

    Energy Technology Data Exchange (ETDEWEB)

    Preller, H

    1922-08-30

    A method of carrying out the process according to Patent 400,122 especially for washing oil or bitumen-bearing mineral materials contaminated with more or less clay, marl, and so forth is characterized in that the oil-bearing raw material is first washed in an opposing stream of warm water for separating the larger part of the oil and settling the larger part of the rock. At the same time the fine clay suspended during the washing operation to a large extent and the remaining rock particles, which are unbound from the oil, by means of a regulatable water stream for further washing are carried into a receptacle of greater cross section, where by the very slow rise of the liquid the finer oil particles find an opportunity to ascend.

  18. Reflections on prospective raw materials and materials with regard to the Czech Republic

    International Nuclear Information System (INIS)

    Schejbal, C.; Palas, M.

    1997-01-01

    Reflections on prospective mineral raw materials and materials must rest upon the expected demographic evolution, the evaluation of economic development and the development of manufacturing technologies and materials corresponding to them, trends in the consumption of mineral raw materials and possibilities of securing them. The evaluation of the given factors under conditions of the Czech Republic shows that one of the decisive prerequisites to transforming the Czech economy is to assure the fuel and energy security of the state. In addition to emphasis put on traditional and newly developed technologies of utilization of domestic resources of coal and the development of nuclear power, a diversification of supplies of oil and gas is necessary. Moreover, it is necessary to ensure domestic resources of raw materials to some prospective material areas, or to provide these raw materials by means of imports and/or entrepreneurial activity abroad. As far as raw materials for building and industrial rocks are concerned, it is necessary to support the exploitation and home utilization through laws and suitable economic tools at respecting environmental limitations. With non-traditional prospective raw materials, it will be desirable to promote exploration and mining especially in those cases when a precondition exists for the securing of sufficient reserves or when reserves are already known

  19. Effect of Oregano Essential Oil (Origanum vulgare subsp. hirtum) on the Storage Stability and Quality Parameters of Ground Chicken Breast Meat

    Science.gov (United States)

    Al-Hijazeen, Marwan; Lee, Eun Joo; Mendonca, Aubrey; Ahn, Dong Uk

    2016-01-01

    A study was conducted to investigate the effect of oregano essential oil on the oxidative stability and color of raw and cooked chicken breast meats. Five treatments, including (1) control (none added); (2) 100 ppm oregano essential oil; (3) 300 ppm oregano essential oil; (4) 400 ppm oregano essential oil; and (5) 5 ppm butylated hydroxyanisole (BHA), were prepared with ground boneless, skinless chicken breast meat and used for both raw and cooked meat studies. For raw meat study, samples were individually packaged in oxygen-permeable bags and stored in a cold room (4 °C) for 7 days. For cooked meat study, the raw meat samples were vacuum-packaged in oxygen-impermeable vacuum bags and then cooked in-bag to an internal temperature of 75 °C. After cooling to room temperature, the cooked meats were repackaged in new oxygen-permeable bags and then stored at 4 °C for 7 days. Both raw and cooked meats were analyzed for lipid and protein oxidation, volatiles, and color at 0, 3, and 7 days of storage. Oregano essential oil significantly reduced (p oil at 400 ppm showed the strongest effect for all these parameters. Hexanal was the major aldehyde, which was decreased significantly (p oil treatment, in cooked meat. Overall, oregano essential oil at 100–400 ppm levels could be a good preservative that can replace the synthetic antioxidant in chicken meat. PMID:27338486

  20. Effect of Oregano Essential Oil (Origanum vulgare subsp. hirtum) on the Storage Stability and Quality Parameters of Ground Chicken Breast Meat.

    Science.gov (United States)

    Al-Hijazeen, Marwan; Lee, Eun Joo; Mendonca, Aubrey; Ahn, Dong Uk

    2016-06-07

    A study was conducted to investigate the effect of oregano essential oil on the oxidative stability and color of raw and cooked chicken breast meats. Five treatments, including (1) control (none added); (2) 100 ppm oregano essential oil; (3) 300 ppm oregano essential oil; (4) 400 ppm oregano essential oil; and (5) 5 ppm butylated hydroxyanisole (BHA), were prepared with ground boneless, skinless chicken breast meat and used for both raw and cooked meat studies. For raw meat study, samples were individually packaged in oxygen-permeable bags and stored in a cold room (4 °C) for 7 days. For cooked meat study, the raw meat samples were vacuum-packaged in oxygen-impermeable vacuum bags and then cooked in-bag to an internal temperature of 75 °C. After cooling to room temperature, the cooked meats were repackaged in new oxygen-permeable bags and then stored at 4 °C for 7 days. Both raw and cooked meats were analyzed for lipid and protein oxidation, volatiles, and color at 0, 3, and 7 days of storage. Oregano essential oil significantly reduced (p oil at 400 ppm showed the strongest effect for all these parameters. Hexanal was the major aldehyde, which was decreased significantly (p oil treatment, in cooked meat. Overall, oregano essential oil at 100-400 ppm levels could be a good preservative that can replace the synthetic antioxidant in chicken meat.

  1. Somaclonal variation associated with oil palm (Elaeis guineensis ...

    African Journals Online (AJOL)

    aghomotsegin

    2014-02-26

    Feb 26, 2014 ... Malaysia and Indonesia together accounting for around. 83% of world palm oil production in 2001 (Wahid et al.,. 2004). The oil palm is an important economic crop, producing food and raw materials for the food, confectionary, cosmetics and ... inherently very slow, and high heterogeneity is still observed ...

  2. Megacities and tall buildings: symbiosis

    Science.gov (United States)

    Safarik, Daniel; Ursini, Shawn; Wood, Antony

    2018-03-01

    Anyone concerned with the development of human civilization in the 21st Century will likely have heard the term «megacity». It is - as it should be - increasingly prevalent in both mainstream and academic discussions of the great trends of our time: urbanization, rising technological and physical connectivity, increasingly polarized extremes of wealth and poverty, environmental degradation, and climate change. It is a subject as large and far-reaching as its name implies. This paper sets the scene on how megacities and the built environment are growing together, and examines the implications for those who plan, design, develop and operate tall buildings and urban infrastructure.

  3. A Biomimetic Structural Form: Developing a Paradigm to Attain Vital Sustainability in Tall Architecture

    OpenAIRE

    Osama Al-Sehail

    2017-01-01

    This paper argues for sustainability as a necessity in the evolution of tall architecture. It provides a different mode for dealing with sustainability in tall architecture, taking into consideration the speciality of its typology. To this end, the article develops a Biomimetic Structural Form as a paradigm to attain Vital Sustainability. A Biomimetic Structural Form, which is derived from the amalgamation of biomimicry as an approach for sustainability defining nature as source of knowledge ...

  4. Potential Development Essential Oil Production of Central Java, Indonesia

    Science.gov (United States)

    Alighiri, D.; Eden, W. T.; Supardi, K. I.; Masturi; Purwinarko, A.

    2017-04-01

    Indonesia is the source of raw essential oil in the world. Essential oils are used in various types of industries such as food and beverage, flavour, fragrance, perfumery, pharmaceuticals, and cosmetics. However, the development of Indonesian essential oil industry has not been encouraging for the production of essential oils, further it is unable to meet global demand. Besides that, the quality of volatile oil resulted cannot meet the international market standards. Based on the facts, the potential of Indonesian essential oils needs to be developed to provide added value, through increased production, improved quality and product diversification. One part of Indonesia having abundant of raw essential oil source is Central Java. Central Java has the quite large potential production of essential oils. Some essential oils produced from refining industry owned by the government, private and community sectors include cananga oils (Boyolali district), clove oils (Semarang district), patchouli oils (Brebes district, Pemalang district, and Klaten district). The main problem in the development of plants industries that producing essential oil in Central Java is low crops production, farming properties, quality of essential oils are diverse, providing poor-quality products and volatile oil price fluctuations. Marketing constraints of Central Java essential oils are quite complex supply chain. In general, marketing constraints of essential oils due to three factors, namely the low quality due to type of essential oil business that generally shaped small businesses with different capital and technology, domestic marketing is still a buyer-market (price determined by the buyer) because of weak bargaining position processors businessman, and prices fluctuate (domestic and foreign) due to uncontrolled domestic production and inter-country competition among manufacturers.

  5. Sustainable design in the contemporary architecture of tall buildings

    Directory of Open Access Journals (Sweden)

    Gil-Mastalerczyk Joanna

    2016-01-01

    Full Text Available The tall buildings in Singapore - one of the main financial centers of the world - reflect the metropolitan character of the city. These buildings emphasize the importance of the center in the urban landscape. They determine and create a new landscape of the city. Objects, mainly about the function of commercial and prestigious, distinguished by the natural environment-friendly image. Through financial expenditures, they excel in the implementation of innovative solutions in the field ecology. The applied design, facade systems and functional systems are subject to the use of renewable energy sources. Promoting the idea the development of the city “inside”. Ecological aspect is the durability of the structure. Modern tall buildings have completely changed the image of the spatial part of the city-state of Singapore and contributed to enhance the individual character and highlight the specifics of the layout and position of the center (combining functions of business, commercial, recreational and residential.

  6. 77 FR 47624 - Tall Bear Group, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes Request...

    Science.gov (United States)

    2012-08-09

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER12-2374-000] Tall Bear Group, LLC; Supplemental Notice That Initial Market- Based Rate Filing Includes Request for Blanket Section 204 Authorization This is a supplemental notice in the above-referenced proceeding, of Tall Bear...

  7. Hydrodeoxygenation of oxidized distilled bio-oil for the production of gasoline fuel type

    International Nuclear Information System (INIS)

    Luo, Yan; Guda, Vamshi Krishna; Hassan, El Barbary; Steele, Philip H.; Mitchell, Brian; Yu, Fei

    2016-01-01

    Highlights: • Oxidation had more influence on the yield of total hydrocarbons than distillation. • The highest total hydrocarbon yield was obtained from oxidized distilled bio-oil. • The 2nd-stage hydrocarbons were in the range of gasoline fuel boiling points. • The main products for upgrading of oxidized bio-oil were aliphatic hydrocarbons. • The main products for upgrading of non-oxidized bio-oil were aromatic hydrocarbons. - Abstract: Distilled and oxidized distilled bio-oils were subjected to 1st-stage mild hydrodeoxygenation and 2nd-stage full hydrodeoxygenation using nickel/silica–alumina catalyst as a means to enhance hydrocarbon yield. Raw bio-oil was treated for hydrodeoxygenation as a control to which to compare study treatments. Following two-stage hydrodeoxygenation, four types of hydrocarbons were mainly comprised of gasoline and had water contents, oxygen contents and total acid numbers of nearly zero and higher heating values of 44–45 MJ/kg. Total hydrocarbon yields for raw bio-oil, oxidized raw bio-oil, distilled bio-oil and oxidized distilled bio-oil were 11.6, 16.2, 12.9 and 20.5 wt.%, respectively. The results indicated that oxidation had the most influence on increasing the yield of gasoline fuel type followed by distillation. Gas chromatography/mass spectrometry characterization showed that 66.0–76.6% of aliphatic hydrocarbons and 19.5–31.6% of aromatic hydrocarbons were the main products for oxidized bio-oils while 35.5–38.7% of aliphatic hydrocarbons and 58.2–63.1% of aromatic hydrocarbons were the main products for non-oxidized bio-oils. Both aliphatic and aromatic hydrocarbons are important components for liquid transportation fuels and chemical products.

  8. Economic Analysis of USN-Based Data Acquisition Systems in Tall Building Construction

    Directory of Open Access Journals (Sweden)

    Hyunsu Lim

    2017-08-01

    Full Text Available The successful construction of tall buildings requires effective construction management based on various quantitative data. The recent development of ubiquitous sensor networks (USNs enables massive amounts of data to be collected in real-time. However, the application of USN-based data acquisition systems to repetitive tasks on typical floors of tall buildings can be inefficient, because this may involve the repetitive reinstallation of sensors and the repositioning of data loggers and routers to enable continuous data transfer. To minimize this cumbersome work, a modified data acquisition method using reusable sensor nodes and mobile devices can be a useful solution. This study analyzes the economic aspects of the USN-based systems for concrete temperature monitoring by using the activity-based costing technique. The case study shows that the modified system can reduce the process cost by about 19%. It can also reduce the resource input time of management by about 55%, freeing up time for other management activities. Moreover, the cost benefits should scale up as projects increasingly require more measurement and monitoring. This study should facilitate the application of USN-based information management systems, particularly for tall building construction.

  9. Aberrant activity of NKL homeobox gene NKX3-2 in a T-ALL subset

    Science.gov (United States)

    Meyer, Corinna; Kaufmann, Maren; Zaborski, Margarete; MacLeod, Roderick A. F.; Drexler, Hans G.

    2018-01-01

    T-cell acute lymphoblastic leukemia (T-ALL) is a hematopoietic malignancy originating from T-cell progenitors in which differentiation is blocked at early stages. Physiological expression of specific NKL homeobox genes obeys a hematopoietic NKL-code implicated in the process of lymphopoiesis while in differentiated T-cells these genes are silenced. We propose that this developmental expression pattern underlies the observation that NKL homeobox genes are the most ubiquitous group of transcription factors deregulated in T-ALL, including TLX1, TLX3, NKX2-5 and NKX3-1. Here, we describe a novel member of the NKL homeobox gene subclass, NKX3-2 (BAPX1), which is aberrantly activated in 18% of pediatric T-ALL patients analyzed while being normally expressed in developing spleen. Identification of NKX3-2 expression in T-ALL cell line CCRF-CEM qualified these cells to model its deregulation and function in a leukemic context. Genomic and chromosomal analyses demonstrated normal configuration of the NKX3-2 locus at chromosome 4p15, thus excluding cytogenetic dysregulation. Comparative expression profiling analysis of NKX3-2 patient data revealed deregulated activity of BMP- and MAPK-signalling. These candidate pathways were experimentally confirmed to mediate aberrant NKX3-2 expression. We also show that homeobox gene SIX6, plus MIR17HG and GATA3 are downstream targets of NKX3-2 and plausibly contribute to the pathogenesis of this malignancy by suppressing T-cell differentiation. Finally, NKL homeobox gene NKX2-5 was activated by NKX3-2 in CCRF-CEM and by FOXG1 in PEER, representing mutually inhibitory activators of this translocated oncogene. Together, our findings reveal a novel oncogenic NKL homeobox gene subclass member which is aberrantly expressed in a large subset of T-ALL patients and participates in a deregulated gene network likely to arise in developing spleen. PMID:29746601

  10. Oil sands supply outlook

    International Nuclear Information System (INIS)

    Dunbar, R.

    2004-01-01

    In March 2004, The Canadian Energy Research Institute released a report on the expected future supply from Alberta's oil sands. The report indicates that the future for the already well-established oil sands industry is promising, particularly given the outlook for oil prices. The challenges facing the industry include higher industry supply costs and the need for innovative commercial and technological solutions to address the risks of irregularities and changes in crude oil prices. In 2003, the industry produced 874 thousand barrels per day of synthetic crude oil and unprocessed crude bitumen. This represents 35 per cent of Canada's total oil production. Current production capacity has increased to 1.0 million barrels per day (mbpd) due to new projects. This number may increase to 3.5 mbpd by 2017. Some new projects may be deferred due to the higher raw bitumen and synthetic crude oil supply costs. This presentation provided supply costs for a range of oil sands recovery technologies and production projections under various business scenarios. tabs., figs

  11. Remediation of PAH-contaminated soil by the combination of tall fescue, arbuscular mycorrhizal fungus and epigeic earthworms.

    Science.gov (United States)

    Lu, Yan-Fei; Lu, Mang

    2015-03-21

    A 120-day experiment was performed to investigate the effect of a multi-component bioremediation system consisting of tall fescue (Festuca arundinacea), arbuscular mycorrhizal fungus (AMF) (Glomus caledoniun L.), and epigeic earthworms (Eisenia foetida) for cleaning up polycyclic aromatic hydrocarbons (PAHs)-contaminated soil. Inoculation with AMF and/or earthworms increased plant yield and PAH accumulation in plants. However, PAH uptake by tall fescue accounted for a negligible portion of soil PAH removal. Mycorrhizal tall fescue significantly enhanced PAH dissipation, PAH degrader density and polyphenol oxidase activity in soil. The highest PAH dissipation (93.4%) was observed in the combination treatment: i.e., AMF+earthworms+tall fescue, in which the soil PAH concentration decreased from an initial value of 620 to 41 mg kg(-1) in 120 days. This concentration is below the threshold level required for Chinese soil PAH quality (45 mg kg(-1) dry weight) for residential use. Copyright © 2014 Elsevier B.V. All rights reserved.

  12. Comparison of different extraction methods and HPLC quantification of prenylated and unprenylated phenylpropanoids in raw Italian propolis.

    Science.gov (United States)

    Taddeo, Vito Alessandro; Epifano, Francesco; Fiorito, Serena; Genovese, Salvatore

    2016-09-10

    In this paper the presence of selected prenylated and unprenylated phenylpropanoids, namely ferulic acid 1, boropinic acid 2, 4'-geranyloxyferulic acid 3, umbelliferone 4, 7-isopentenyloxycoumarin 5, and auraptene 6, have been determined in Italian raw propolis after having been extracted with different methodologies. An aqueous solution of β-cyclodextrin was the best extraction method for ferulic acid 1, treatment with indifferently EtOH or aqueous β-cyclodextrin were the most effective one for umbelliferone 4, boropinic acid 2 gave the best yields either with H2O/β-cyclodextrin or olive oil treatment or in biphasic systems, maceration with biphasic mixtures of aqueous β-cyclodextrin and olive oil was seen to be the most effective procedure for 7-isopentenyloxycoumarin 5, the only method providing significant quantities of 4'-geranyloxyferulic acid 3 was the maceration of raw propolis with olive oil, and finally auraptene 4 was best extracted with absolute EtOH. "Classic" maceration in general performed better than ultrasound-assisted one. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. Chemical composition and nutritive value of irrigated tall fescue ...

    African Journals Online (AJOL)

    Chemical composition and nutritive value of irrigated tall fescue pasture for dairy cows. TJ Dugmore, KP Walsh, Sally J. Morning, CI MacDonald. Abstract. No Abstract. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · AJOL African Journals Online. HOW TO ...

  14. Computer Programme for the Dynamic Analysis of Tall Regular ...

    African Journals Online (AJOL)

    The traditional method of dynamic analysis of tall rigid frames assumes the shear frame model. Models that allow joint rotations with/without the inclusion of the column axial loads give improved results but pose much more computational difficulty. In this work a computer program Natfrequency that determines the dynamic ...

  15. Pengaruh Konsentrasi Minyak Kelapa Murni (Virgin Coconut Oil) dan Minyak Jarak (Castor Oil) terhadap Sifat Fisikokimia dan Organoleptik Sabun Mandi Cair

    OpenAIRE

    Asri Widyasanti; Shayana Junita; Sarifah Nurjanah

    2017-01-01

    VCO contains of lauric acid that perform to smooth and to moisturize the skin. Castor oil has ricinoleic acid that serves to protect the skin. Therefore, both of the oil are suitable to be the raw material for liquid soap making. This study aimed were to produce a liquid soap, to determine the exact concentration of VCO and castor oil for liquid soap and to find out the effect of VCO and Castor Oil concentrations to the characteristics of liquid soap. The method used was laboratory experiment...

  16. Plant oil renewable resources as green alternatives in polymer science

    NARCIS (Netherlands)

    Meier, M.A.R.; Metzger, J.O.; Schubert, U.S.

    2007-01-01

    The utilization of plant oil renewable resources as raw materials for monomers and polymers is discussed and reviewed. In an age of increasing oil prices, global warming and other environmental problems (e.g. waste) the change from fossil feedstock to renewable resources can considerably contribute

  17. Palm oil based polyols for acrylated polyurethane production

    International Nuclear Information System (INIS)

    Rida Tajau; Mohd Hilmi Mahmood; Mek Zah Salleh; Khairul Zaman Mohd Dahlan; Rosley Che Ismail

    2006-01-01

    Palm oil becomes important renewable resources for the production of polyols for the polyurethane manufacturing industry. The main raw materials used for the production of acrylated polyurethane are polyols, isocyanates and hydroxyl terminated acrylate compounds. In these studies, polyurethane based natural polymer (palm oil), i.e., POBUA (Palm Oil Based Urethane Acrylate) were prepared from three different types of palm oil based polyols i.e., epoxidised palm oil (EPOP), palm oil oleic acid and refined, bleached and deodorized (RBD) palm olein based polyols. The performances of these three acrylated polyurethanes when used for coatings and adhesives were determined and compared with each other. (Author)

  18. Effects of pan frying with different oils on some of the chemical ...

    African Journals Online (AJOL)

    The changes in chemical composition, cholesterol and fatty acids have been determined in raw and fried rainbow trout. Olive oil, sunflower oil, corn oil, margarine and butter were used in the frying process. Moisture content was decreased and protein, fat, ash and cholesterol contents were increased after frying. Differences ...

  19. Biodiesel production from acid oils and ethanol using a solid basic resin as catalyst

    International Nuclear Information System (INIS)

    Marchetti, J.M.; Errazu, A.F.

    2010-01-01

    In the search of an alternative fuel to substitute diesel fuel, biodiesel appears as one of the most promising sources of energy for diesel engines because of its environmental advantages and also due to the evolution of the petroleum market. Refined oil is the conventional raw material for the production of this biofuel; however, its major disadvantage is the high cost of its production. Therefore, frying oils, waste oils, crude oils and/or acid oils are being tested as alternative raw materials; nevertheless, there will be some problems if a homogeneous basic catalyst (NaOH) is employed due to the high amount of free fatty acid present in the raw oil. In this work, the transesterification reaction of acid oil using solid resin, Dowex monosphere 550 A, was studied as an alternative process. Ethanol was employed to have a natural and sustainable final product. The reaction temperature's effects, the initial amount of free fatty acid, the molar ratio of alcohol/oil and the type of catalyst (homogeneous or heterogeneous) over the main reaction are analyzed and their effects compared. The results obtained show that the solid resin is an alternative catalyst to be used to produce fatty acid ethyl esters (FAEEs) by a transesterification reaction with a final conversion over 90%. On the other hand, the time required to achieve this conversion is bigger than the one required using conventional technology which employs a homogeneous basic catalyst. This reaction time needs to be optimized. (author)

  20. Microalgae as a raw material for biofuels production.

    Science.gov (United States)

    Gouveia, Luisa; Oliveira, Ana Cristina

    2009-02-01

    Biofuels demand is unquestionable in order to reduce gaseous emissions (fossil CO(2), nitrogen and sulfur oxides) and their purported greenhouse, climatic changes and global warming effects, to face the frequent oil supply crises, as a way to help non-fossil fuel producer countries to reduce energy dependence, contributing to security of supply, promoting environmental sustainability and meeting the EU target of at least of 10% biofuels in the transport sector by 2020. Biodiesel is usually produced from oleaginous crops, such as rapeseed, soybean, sunflower and palm. However, the use of microalgae can be a suitable alternative feedstock for next generation biofuels because certain species contain high amounts of oil, which could be extracted, processed and refined into transportation fuels, using currently available technology; they have fast growth rate, permit the use of non-arable land and non-potable water, use far less water and do not displace food crops cultures; their production is not seasonal and they can be harvested daily. The screening of microalgae (Chlorella vulgaris, Spirulina maxima, Nannochloropsis sp., Neochloris oleabundans, Scenedesmus obliquus and Dunaliella tertiolecta) was done in order to choose the best one(s), in terms of quantity and quality as oil source for biofuel production. Neochloris oleabundans (fresh water microalga) and Nannochloropsis sp. (marine microalga) proved to be suitable as raw materials for biofuel production, due to their high oil content (29.0 and 28.7%, respectively). Both microalgae, when grown under nitrogen shortage, show a great increase (approximately 50%) in oil quantity. If the purpose is to produce biodiesel only from one species, Scenedesmus obliquus presents the most adequate fatty acid profile, namely in terms of linolenic and other polyunsaturated fatty acids. However, the microalgae Neochloris oleabundans, Nannochloropsis sp. and Dunaliella tertiolecta can also be used if associated with other

  1. Thermal and oxidative stability of the Ocimum basilicum L. essential oil/β-cyclodextrin supramolecular system

    Directory of Open Access Journals (Sweden)

    Daniel I. Hădărugă

    2014-11-01

    Full Text Available Ocimum basilicum L. essential oil and its β-cyclodextrin (β-CD complex have been investigated with respect to their stability against the degradative action of air/oxygen and temperature. This supramolecular system was obtained by a crystallization method in order to achieve the equilibrium of complexed–uncomplexed volatile compounds in an ethanol/water solution at 50 °C. Both the raw essential oil and its β-CD complex have been subjected to thermal and oxidative degradation conditions in order to evaluate the protective capacity of β-CD. The relative concentration of the O. basilicum L. essential oil compounds, as determined by GC–MS, varies accordingly with their sensitivity to the thermal and/or oxidative degradation conditions imposed. Furthermore, the relative concentration of the volatile O. basilicum L. compounds found in the β-CD complex is quite different in comparison with the raw material. An increase of the relative concentration of linalool oxide from 0.3% to 1.1%, in addition to many sesquiterpene oxides, has been observed. β-CD complexation of the O. basilicum essential oil modifies the relative concentration of the encapsulated volatile compounds. Thus, linalool was better encapsulated in β-CD, while methylchavicol (estragole was encapsulated in β-CD at a concentration close to that of the raw essential oil. Higher relative concentrations from the degradation of the oxygenated compounds such as linalool oxide and aromadendren oxide were determined in the raw O. basilicum L. essential oil in comparison with the corresponding β-CD complex. For the first time, the protective capability of natural β-CD for labile basil essential oil compounds has been demonstrated.

  2. Thermal and oxidative stability of the Ocimum basilicum L. essential oil/β-cyclodextrin supramolecular system.

    Science.gov (United States)

    Hădărugă, Daniel I; Hădărugă, Nicoleta G; Costescu, Corina I; David, Ioan; Gruia, Alexandra T

    2014-01-01

    Ocimum basilicum L. essential oil and its β-cyclodextrin (β-CD) complex have been investigated with respect to their stability against the degradative action of air/oxygen and temperature. This supramolecular system was obtained by a crystallization method in order to achieve the equilibrium of complexed-uncomplexed volatile compounds in an ethanol/water solution at 50 °C. Both the raw essential oil and its β-CD complex have been subjected to thermal and oxidative degradation conditions in order to evaluate the protective capacity of β-CD. The relative concentration of the O. basilicum L. essential oil compounds, as determined by GC-MS, varies accordingly with their sensitivity to the thermal and/or oxidative degradation conditions imposed. Furthermore, the relative concentration of the volatile O. basilicum L. compounds found in the β-CD complex is quite different in comparison with the raw material. An increase of the relative concentration of linalool oxide from 0.3% to 1.1%, in addition to many sesquiterpene oxides, has been observed. β-CD complexation of the O. basilicum essential oil modifies the relative concentration of the encapsulated volatile compounds. Thus, linalool was better encapsulated in β-CD, while methylchavicol (estragole) was encapsulated in β-CD at a concentration close to that of the raw essential oil. Higher relative concentrations from the degradation of the oxygenated compounds such as linalool oxide and aromadendren oxide were determined in the raw O. basilicum L. essential oil in comparison with the corresponding β-CD complex. For the first time, the protective capability of natural β-CD for labile basil essential oil compounds has been demonstrated.

  3. Fatherhood in tall men treated with high-dose sex steroids during adolescence.

    Science.gov (United States)

    Hendriks, A E J; Boellaard, W P A; van Casteren, N J; Romijn, J C; de Jong, F H; Boot, A M; Drop, S L S

    2010-12-01

    Sex steroid treatment to reduce final height of tall boys has been available since the 1950s. In women, it has been shown to interfere with fertility. In men, no such data are available. We therefore evaluated fertility and gonadal function in tall men who did or did not receive high-dose androgen treatment in adolescence. We conducted a retrospective cohort study of 116 tall men, of whom 60 had been treated. Reproductive and gonadal function was assessed by standardized interview, semen analysis, endocrine parameters, ultrasound imaging, and fatherhood. Mean age at treatment commencement was 14.2 yr, and mean follow-up was 21.2 yr. Sixty-six men (36 treated and 30 untreated) had attempted to achieve fatherhood. The probability of conceiving their first pregnancy within 1 yr was similar in treated and untreated men (26 vs. 24; Breslow P=0.8). Eleven treated and 13 untreated men presented with a left-sided varicocele (P=0.5). Testicular volume, sperm quality, and serum LH, FSH, and inhibin B levels were comparable between treated and untreated men. However, treated men had significantly reduced serum T levels, adjusted for known confounders [mean (sd) 13.3 (1.8) vs. 15.2 (1.9) nmol/liter; P=0.005). In addition, testicular volume and serum inhibin B and FSH levels in treated men were significantly correlated with age at treatment commencement. At a mean follow-up of 21 yr after high-dose androgen treatment, we conclude that fatherhood and semen quality in tall treated men are not affected. Serum testosterone levels, however, are reduced in androgen-treated men. Future research is required to determine whether declining testosterone levels may become clinically relevant for these men as they age.

  4. Photoshop CS3 RAW Transforming your RAW data into works of art

    CERN Document Server

    Aaland, Mikkel

    2008-01-01

    Because RAW files remain virtually untouched by in-camera processing, working with them has given digital photographers greater flexibility and control during the editing process -- for those who are familiar enough with the format. Camera RAW, the plug in for Adobe Photoshop CS3, has emerged as one of the best and most familiar tools for editing RAW images, and the best way to master this workflow is with Photoshop CS3 RAW. Award-winning author Mikkel Aaland explores the entire RAW process, from the practical reasons to shoot RAW, to managing the images with the new features of Bridge 2.0 n

  5. Differential effects of citric acid on cadmium uptake and accumulation between tall fescue and Kentucky bluegrass.

    Science.gov (United States)

    Wang, ShuTing; Dong, Qin; Wang, ZhaoLong

    2017-11-01

    Organic acids play an important role in cadmium availability, uptake, translocation, and detoxification. A sand culture experiment was designed to investigate the effects of citric acid on Cd uptake, translocation, and accumulation in tall fescue and Kentucky bluegrass. The results showed that two grass species presented different Cd chemical forms, organic acid components and amount in roots. The dormant Cd accumulated in roots of tall fescue was the pectate- and protein- integrated form, which contributed by 84.85%. However, in Kentucky bluegrass, the pectate- and protein- integrated Cd was only contributed by 35.78%, and the higher proportion of Cd form was the water soluble Cd-organic acid complexes. In tall fescue, citric acid dramatically enhanced 2.8 fold of Cd uptake, 3 fold of root Cd accumulation, and 2.3 fold of shoot Cd accumulation. In Kentucky bluegrass, citric acid promoted Cd accumulation in roots, but significantly decreased Cd accumulation in shoots. These results suggested that the enhancements of citric acid on Cd uptake, translocation, and accumulation in tall fescue was associated with its promotion of organic acids and the water soluble Cd-organic acid complexes in roots. Copyright © 2017 Elsevier Inc. All rights reserved.

  6. Degummed crude canola oil, sire breed and gender effects on intramuscular long-chain omega-3 fatty acid properties of raw and cooked lamb meat

    Directory of Open Access Journals (Sweden)

    Aaron Ross Flakemore

    2017-08-01

    Full Text Available Abstract Background Omega-3 long-chain (≥C20 polyunsaturated fatty acids (ω3 LC-PUFA confer important attributes to health-conscious meat consumers due to the significant role they play in brain development, prevention of coronary heart disease, obesity and hypertension. In this study, the ω3 LC-PUFA content of raw and cooked Longissimus thoracis et lumborum (LTL muscle from genetically divergent Australian prime lambs supplemented with dietary degummed crude canola oil (DCCO was evaluated. Methods Samples of LTL muscle were sourced from 24 first cross ewe and wether lambs sired by Dorset, White Suffolk and Merino rams joined to Merino dams that were assigned to supplemental regimes of degummed crude canola oil (DCCO: a control diet at 0 mL/kg DM of DCCO (DCCOC; 25 mL/kg DM of DCCO (DCCOM and 50 mL/kg DCCO (DCCOH. Lambs were individually housed and offered 1 kg/day/head for 42 days before being slaughtered. Samples for cooked analysis were prepared to a core temperature of 70 °C using conductive dry-heat. Results Within raw meats: DCCOH supplemented lambs had significantly (P < 0.05 higher concentrations of eicosapentaenoic (EPA, 20:5ω3 and EPA + docosahexaenoic (DHA, 22:6ω3 acids than those supplemented with DCCOM or DCCOC; Dorset sired lambs contained significantly (P < 0.05 more EPA and EPA + DHA than other sire breeds; diet and sire breed interactions were significant (P < 0.05 in affecting EPA and EPA + DHA concentrations. In cooked meat, ω3 LC-PUFA concentrations in DCCOM (32 mg/100 g, DCCOH (38 mg/100 g, Dorset (36 mg/100 g, White Suffolk (32 mg/100 g, ewes (32 mg/100 g and wethers (33 mg/100 g, all exceeded the minimum content of 30 mg/100 g of edible cooked portion of EPA + DHA for Australian defined ‘source’ level ω3 LC-PUFA classification. Conclusion These results present that combinations of dietary degummed crude canola oil, sheep genetics and culinary preparation method can be used as

  7. ISMRM Raw data format: A proposed standard for MRI raw datasets

    DEFF Research Database (Denmark)

    Inati, Souheil; Naegle, Joseph; R. Zwart, Nicholas

    2016-01-01

    programming languages (C++, MATLAB, Python). Results Images were obtained by reconstructing the raw data from all vendors. The source code, raw data, and images comprising this work are shared online, serving as an example of an image reconstruction project following a paradigm of reproducible research......Purpose This work proposes the ISMRM Raw Data format as a common MR raw data format, which promotes algorithm and data sharing. Methods A file format consisting of a flexible header and tagged frames of k-space data was designed. Application Programming Interfaces were implemented in C/C++, MATLAB......, and Python. Converters for Bruker, General Electric, Philips, and Siemens proprietary file formats were implemented in C++. Raw data were collected using magnetic resonance imaging scanners from four vendors, converted to ISMRM Raw Data format, and reconstructed using software implemented in three...

  8. The complete raw workflow guide how to get the most from your raw images in Adobe Camera Raw, Lightroom, Photoshop, and Elements

    CERN Document Server

    Andrews, Philip

    2007-01-01

    One of the most important technologies a photographer can master is shooting and working with raw images. However, figuring out the best way to work with raw files can be confusing and overwhelming. What's the advantage to working in raw? How do you manage, organize, and store raw files? What's the best way to process your files to meet your photographic needs? How do Photoshop, Lightroom and Adobe Camera Raw work together? Is it possible to keep your photos in the raw format and still enhance them extensively? Philip Andrews answers these questions and more in his all-new essential raw workfl

  9. Evolutionary history of tall fescue morphotypes inferred from molecular phylogenetics of the Lolium-Festuca species complex

    Directory of Open Access Journals (Sweden)

    Stewart Alan V

    2010-10-01

    Full Text Available Abstract Background The agriculturally important pasture grass tall fescue (Festuca arundinacea Schreb. syn. Lolium arundinaceum (Schreb. Darbysh. is an outbreeding allohexaploid, that may be more accurately described as a species complex consisting of three major (Continental, Mediterranean and rhizomatous morphotypes. Observation of hybrid infertility in some crossing combinations between morphotypes suggests the possibility of independent origins from different diploid progenitors. This study aims to clarify the evolutionary relationships between each tall fescue morphotype through phylogenetic analysis using two low-copy nuclear genes (encoding plastid acetyl-CoA carboxylase [Acc1] and centroradialis [CEN], the nuclear ribosomal DNA internal transcribed spacer (rDNA ITS and the chloroplast DNA (cpDNA genome-located matK gene. Other taxa within the closely related Lolium-Festuca species complex were also included in the study, to increase understanding of evolutionary processes in a taxonomic group characterised by multiple inter-specific hybridisation events. Results Putative homoeologous sequences from both nuclear genes were obtained from each polyploid species and compared to counterparts from 15 diploid taxa. Phylogenetic reconstruction confirmed F. pratensis and F. arundinacea var. glaucescens as probable progenitors to Continental tall fescue, and these species are also likely to be ancestral to the rhizomatous morphotype. However, these two morphotypes are sufficiently distinct to be located in separate clades based on the ITS-derived data set. All four of the generated data sets suggest independent evolution of the Mediterranean and Continental morphotypes, with minimal affinity between cognate sequence haplotypes. No obvious candidate progenitor species for Mediterranean tall fescues were identified, and only two putative sub-genome-specific haplotypes were identified for this morphotype. Conclusions This study describes the first

  10. Wind Shear Characteristics at Central Plains Tall Towers (presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Schwartz, M.; Elliott, D.

    2006-06-05

    The objectives of this report are: (1) Analyze wind shear characteristics at tall tower sites for diverse areas in the central plains (Texas to North Dakota)--Turbines hub heights are now 70-100 m above ground and Wind measurements at 70-100+ m have been rare. (2) Present conclusions about wind shear characteristics for prime wind energy development regions.

  11. Alterations in serotonin receptor-induced contractility of bovine lateral saphenous vein in cattle grazing endophyte-infected tall fescue

    Science.gov (United States)

    As part of a large 2-year study documenting the physiologic impact of grazing endophyte-infected tall fescue on growing cattle, 2 experiments were conducted to characterize and evaluate the effects of grazing 2 levels of toxic endophyte-infected tall fescue pastures on vascular contractility and ser...

  12. Raw materials for the energy supply of the future. Geology, markets, environmental influences

    International Nuclear Information System (INIS)

    Hagelueken, Christian; Thauer, Rudolf K.; Buchholz, Peter; Gutzmer, Jens; Littke, Ralf; Angerer, Gerhard; Wellmer, Friedrich-Wilhelm

    2015-01-01

    More and more metals are needed to expand modern energy technologies, but we can not completely dispense with fossil raw materials and biomass in the near future either. Are the incidence of the conversion of energy sources sufficient? The analysis of the academy project ''Energy Systems of the Future'' (ESYS) comes to the conclusion that geologically enough raw materials are available. The challenge, however, is to make the supply safe, affordable and environmentally and socially compatible. The analysis explains the mechanisms of action on the global commodity markets and identifies supply risks. These include, for example, sudden demand on the international markets as well as the unequal distribution of the world's raw material reserves. This is followed by the analysis approaches, in order to recognize warning signals for potential raw material bottlenecks in time, to develop evasive strategies and to secure the raw material supply for the energy turnarounds. For example, the expansion of recycling can help to reduce the dependence on metal imports. In mining, on the other hand, innovative technologies have to be developed in order to improve the exploration and utilization of the deposits. By establishing binding environmental and social standards, the extraction of raw materials could also become more sustainable. The analysis also highlights the importance of bioenergy and fossil raw materials, such as oil and natural gas, for energy generation. The authors describe the advantages and disadvantages of these energy carriers and the measures that can be used to reduce environmental pollution such as greenhouse gas emissions. [de

  13. Research of losses of oil oil and mineral oil at transportation and storage

    International Nuclear Information System (INIS)

    Akzhigitov, A.S.

    2005-01-01

    Full text : All way of hydrocarbonic raw material from a mouth of oil wells up to the consumer is accompanied by losses which occur as a result of evaporation, outflow and change of quality. Therefore preservation of quantity and quality of oil and mineral oil during transportation and storages is the major not only economic, but also an ecological problem. The facilitated fractional structure, the big maintenance concern to prominent features of the majority oil from underground salts adjournment Prycaspi in them of the easy hydrocarbons, the raised gas factor in conditions of deposits and presence in structure of gases, except for hydrocarbons and sour a component, - hydrogen sulphide, carbonic gas, etc. The superficial tests stabilized on phase structure oil depending on conditions of preparation for external transport and the subsequent processing can contain this or that quantity of residual hydrogen sulphide, easy hydrocarbons and the lowest sulfhydrates. For change of temperature and external pressure, during transportation and storage the part of easy hydrocarbons and not hydrocarbonic connections (sulfur organic) can be allocated from oil in a gaseous phase and in case of hit in an atmosphere sharply worsens ecology. In the Western Kazakhstan during the years period the temperature of air sometimes reaches up to 40-45 degrees. As is known, at such temperature there is a strengthened warming up of the open surface of oil tanks, that finally leads to increase evaporation easy oil and oil hydrocarbons. With this purpose experiences by quantitative definition evaporation lungs oil and petromixes of the Western Kazakhstan were spent. As a result of the lead works it is found out, that the size of losses at the given fixed temperature depends on evaporation by nature, fractional and hydrocarbonic structures of oil

  14. Combustion properties, water absorption and grindability of raw/torrefied biomass pellets and Silantek coal

    Science.gov (United States)

    Matali, Sharmeela; Rahman, Norazah Abdul; Idris, Siti Shawaliah; Yaacob, Nurhafizah

    2017-12-01

    Torrefaction, also known as mild pyrolysis, is proven to convert raw biomass into a value-added energy commodity particularly for application in combustion and co-firing systems with improved storage and handling properties. This paper aims to compare the characteristics of Malaysian bituminous coal i.e. Silantek coal with raw and torrefied biomass pellet originated from oil palm frond and fast growing tree species, Leucaena Leucocephala. Biomass samples were initially torrefied at 300 °C for 60 minutes. Resulting torrefied biomass pellets were analysed using a number of standard fuel characterisation analyses i.e. elemental analysis, proximate analysis and calorific content (high heating values) experiments. Investigations on combustion characteristics via dynamic thermogravimetric analysis (TGA), grindability and moisture uptake tests were also performed on the torrefied biomass pellets. Better quality bio-chars were produced as compared to its raw forms and with optimal process conditions, torrefaction may potentially produces a solid fuel with combustion reactivity and porosity equivalent to raw biomass while having compatible energy density and grindability to coal.

  15. The Effects of Agricultural Raw Product Exports on Environment Quality

    Directory of Open Access Journals (Sweden)

    hosein mohammadi

    2016-10-01

    Classification of goods in the first group of agricultural raw materials ere used. We consider some of the goods are raw agricultural sector as a percentage of GDP and sectors including oil and minerals were removed from it. Therefore, this variable includes food and live animals, beverages and tobacco, crude materials, excluding fuel and other edible animal fats and vegetable oils. The data has been obtained from the global dataset of FAO. Variables such as Animal fats and vegetable oils and the per capita income squared has been omitted because of co linearity. Instrumental variables such as agricultural land (% of land area and agricultural machinery is taken from WDI. These variables include per capita emissions of agricultural methane, per capita emissions of agricultural nitrous oxide gas, and biological oxygen demand (BOD per capita. Methane (CH4 is a greenhouse gas that contributes to global warming and ozone pollution. More than fifty percent of the methane gas is due to agricultural activities. Results and Discussion: The results of the instrumental variable method show that the export of agricultural products in developing countries will increase the emissions of nitrous oxide and methane gas and reduces water pollution. The coefficients of the variables considered positive for developed countries, but only the coefficient of nitrogen oxide emissions is significant. To investigate which of raw agricultural products, subtypes play a greater role in environmental pollution, we have re-estimated equation with place components of agricultural raw products, beverages and tobacco, crude materials excluding fuels and other edible fats and vegetable and animal oils. The results for the three pollutants reported in the table. This result indicates that only the export of drinking and tobacco increased environmental pollution by increasing methane in developing countries. So, none of the variables have significant impact on water pollution. The logarithm of the per capita

  16. National reports on raw materials economy. Vol. 6

    International Nuclear Information System (INIS)

    Haude, H.; Weber, R.

    1975-06-01

    A review is given of the ore deposits, mine production, and use of mineral resources in Argentina (oil, gas, asphalt, oil shale, coal, uranium, thorium, iron, manganese, chrome, tungsten, vanadium, copper, lead, zinc, tin, antimony, gold, silver, aluminium, beryllium, boron, sulfur, and fluorite). Argentina is dependent on imports of nearly all mineral resources. Only exports of zinc, tungsten, fluorite, and borate have been possible and the only other significant production has been of energy resources, iron, manganese, and lead. The extreme concentration of population in the east, the great distances to the Andes in the west, and the as yet inadequate transport network with the west has limited the mining activity up to the present. As part of industrial development, the government has made great efforts to increase the supply of raw materials through intensive prospecting and use of Argentina's own natural resources. Newly discovered ore deposits confirm that extensive parts of the country are prospective for mineral resources. (orig.) [de

  17. Fertilization of Southern Tall Grassveld of Natal: effects on botanical ...

    African Journals Online (AJOL)

    The long-term effects of nitrogen, phosphate and lime on change in botanical composition and utilisation under grazing of Southern Tall Grassveld of Natal are presented. Nitrogen, phosphate, lime and type of nitrogen affected botanical composition significantly. Generally, fertilisation had the same effect on species ...

  18. Oxidative stability of biodiesel blends derived from waste frying oils

    Directory of Open Access Journals (Sweden)

    Michael Feroldi

    2017-07-01

    Full Text Available The high cost of biodiesel production is mainly linked to the price of raw material.This factor has favored the use of alternative fats and oils such as those used in frying. Since biodiesel can be obtained from several vegetable and animal raw materials, the physicochemical characteristics of the fuel may vary considerably. One of these characteristics is the fatty acid composition. It directly affects the oxidative stability of biodiesel, which can be impaired when the fuel undergoes exposure to sunlight, metals, oxygen and high temperatures. In order to improve the oxidative stability of biodiesels produced from waste frying oil some studies involving blends of different raw materials have been carried out. In this sense, this work aimed to assess the characteristics resulting from the blending of soybean waste frying oil with other waste biodiesels in what concerns to oxidation. The blends of fatty materials were obtained by means of a 2² factorial design. The induction periods of biodiesel blends were enough to meet the ASTM D6751 standard. Swine fat was responsible for the increase in the induction period values.

  19. Tall Buildings and Elevators: A Review of Recent Technological Advances

    Directory of Open Access Journals (Sweden)

    Kheir Al-Kodmany

    2015-09-01

    Full Text Available Efficient vertical mobility is a critical component of tall building development and construction. This paper investigates recent advances in elevator technology and examines their impact on tall building development. It maps out, organizes, and collates complex and scattered information on multiple aspects of elevator design, and presents them in an accessible and non-technical discourse. Importantly, the paper contextualizes recent technological innovations by examining their implementations in recent major projects including One World Trade Center in New York; Shanghai Tower in Shanghai; Burj Khalifa in Dubai; Kingdom Tower in Jeddah, Saudi Arabia; and the green retrofit project of the Empire State Building in New York. Further, the paper discusses future vertical transportation models including a vertical subway concept, a space lift, and electromagnetic levitation technology. As these new technological advancements in elevator design empower architects to create new forms and shapes of large-scale, mixed-use developments, this paper concludes by highlighting the need for interdisciplinary research in incorporating elevators in skyscrapers.

  20. Wind profile modelling using WAsP and "tall" wind measurements

    DEFF Research Database (Denmark)

    Floors, Rogier Ralph; Kelly, Mark C.; Troen, Ib

    2015-01-01

    extrapolations (the wind profile) this is done using the Weibull distribution and the geostrophic drag law. Wind lidar measurements obtained during the ’Tall wind’ campaign at three different sites are used to evaluate the assumptions and equations that are used in the WAsP vertical extrapolation strategy...

  1. A Simple Tall Fescue Seed Extraction and Partial Purification of Ergovaline

    Science.gov (United States)

    There are several substances present in the tall fescue/endophyte association (Lolium arundinaceum /Neotyphodium coenophialum) that have biological activity. These include the pyrrolizidine and ergot alkaloids plus peramine. Of these compounds only the ergot alkaloids have significant mammalian to...

  2. Influence of 7,8-methylenedioxylycoctonine-type alkaloids on the toxic effects associated with ingestion of tall larkspur (Delphinium spp) in cattle.

    Science.gov (United States)

    Welch, Kevin D; Green, Benedict T; Gardner, Dale R; Cook, Daniel; Pfister, James A; Stegelmeier, Bryan L; Panter, Kip E; Davis, T Zane

    2010-04-01

    To determine the contribution of 7,8-methylenedioxylycoctonine (MDL)-type alkaloids to the toxic effects of tall larkspur (Delphinium spp) consumption in cattle. Sixteen 2-year-old Angus steers. Plant material from 3 populations of tall larkspur that contained different concentration ratios of MDL-type-to-N-(methylsuccinimido) anthranoyllycoctonine (MSAL)-type alkaloids was collected, dried, and finely ground. For each plant population, a dose of ground plant material that would elicit similar clinical signs of toxicosis in cattle after oral administration was determined on the basis of the plants' MSAL-type alkaloid concentration. Cattle were treated via oral gavage with single doses of ground plant material from each of the 3 populations of tall larkspur; each animal underwent 1 to 3 single-dose treatments (> or = 21-day interval between treatments). Heart rate was recorded immediately before (baseline) and 24 hours after each larkspur treatment. Tall larkspur populations with a lower MDL-type-to-MSAL-type alkaloid concentration ratio required a greater amount of MSAL-type alkaloids to cause the expected clinical signs of toxicosis (including increased heart rate) in cattle. Results indicated that the typically less toxic MDL-type alkaloids contributed in a significant manner to the toxic effects of tall larkspur in steers. Consequently, both the concentration of MSAL-type alkaloids and the total concentration of MSAL- and MDL-type alkaloids should be determined when assessing the relative toxicity of tall larkspur populations. These results provide valuable information to determine the risk of toxicosis in cattle grazing on tall larkspur-infested rangelands.

  3. The seasonal growth patterns of a Tall Grassveld sward | NFG ...

    African Journals Online (AJOL)

    The growth patterns of a Tall Grassveld sward measured with an inclined point and by clipping and weighing were determined by moisture conditions except in winter when temperature was limiting. The inclined point as a method of determining yield which might replace clipping and weighing, holds promise but is unlikely ...

  4. Dynamics of tall buildings under stochastic wind load: Applicability of Eurocode EN 1991-1-4 procedures 1 and 2

    NARCIS (Netherlands)

    Steenbergen, R.D.J.M.; Vrouwenvelder, A.C.W.M.; Geurts, C.P.W.

    2009-01-01

    The new generation of tall buildings is higher and more slender than the buildings built before. Additionally, increased use is made of high-strength materials which have a higher strength yet the same stiffness properties as conventional materials. Both aspects increase the sensitivity of tall

  5. Dynamics of tall buildings under stochastic wind load: applicability of Eurocode EN 1991-1-4 procedures 1 and 2

    NARCIS (Netherlands)

    Steenbergen, R.D.J.M.; Vrouwenvelder, A.C.W.M.; Geurts, C.P.W.; Borri, C.

    2009-01-01

    The new generation of tall buildings is higher and more slender than the buildings built before. Additionally, increased use is made of high-strength materials which have a higher strength yet the same stiffness properties as conventional materials. Both aspects increase the sensitivity of tall

  6. Hydrodeoxygenation of prairie cordgrass bio-oil over Ni based activated carbon synergistic catalysts combined with different metals.

    Science.gov (United States)

    Cheng, Shouyun; Wei, Lin; Zhao, Xianhui; Kadis, Ethan; Cao, Yuhe; Julson, James; Gu, Zhengrong

    2016-06-25

    Bio-oil can be upgraded through hydrodeoxygenation (HDO). Low-cost and effective catalysts are crucial for the HDO process. In this study, four inexpensive combinations of Ni based activated carbon synergistic catalysts including Ni/AC, Ni-Fe/AC, Ni-Mo/AC and Ni-Cu/AC were evaluated for HDO of prairie cordgrass (PCG) bio-oil. The tests were carried out in the autoclave under mild operating conditions with 500psig of H2 pressure and 350°C temperature. The catalysts were characterized by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) and transmission electron microscope (TEM). The results show that all synergistic catalysts had significant improvements on the physicochemical properties (water content, pH, oxygen content, higher heating value and chemical compositions) of the upgraded PCG bio-oil. The higher heating value of the upgraded bio-oil (ranging from 29.65MJ/kg to 31.61MJ/kg) improved significantly in comparison with the raw bio-oil (11.33MJ/kg), while the oxygen content reduced to only 21.70-25.88% from 68.81% of the raw bio-oil. Compared to raw bio-oil (8.78% hydrocarbons and no alkyl-phenols), the Ni/AC catalysts produced the highest content of gasoline range hydrocarbons (C6-C12) at 32.63% in the upgraded bio-oil, while Ni-Mo/AC generated the upgraded bio-oil with the highest content of gasoline blending alkyl-phenols at 38.41%. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. Characteristics and composition of Jatropha gossypiifoliaand Jatropha curcas L. oils and application for biodiesel production

    Energy Technology Data Exchange (ETDEWEB)

    de Oliveira, Jefferson S.; Leite, Polyanna M.; de Souza, Lincoln B.; Mello, Vinicius M.; Rubim, Joel C.; Suarez, Paulo A.Z. [Laboratorio de Materiais e Combustiveis, Instituto de Quimica, Universidade de Brasilia, C.P. 4478, 70919-970 Brasilia, DF (Brazil); Silva, Eid C.; Meneghetti, Simoni M.P. [Instituto de Quimica e Biotecnologia, Universidade Federal de Alagoas, Av. Lourival de Melo Mota, s/n, Cidade Universitaria, 57072-970 Maceio-AL (Brazil)

    2009-03-15

    In this work two genus of the Jatropha family: the Jatropha gossypiifolia (JG) and Jatropha curcas L. (JC) were studied in order to delimitate their potential as raw material for biodiesel production. The oil content in wild seeds and some physical-chemical properties of the oils and the biodiesel obtained from them were evaluated. The studied physical-chemical properties of the JC and JG biodiesel are in acceptable range for use as biodiesel in diesel engines, showing a promising economic exploitation of these raw materials in semi-arid regions. However, further agronomic studies are needed in order to improve the seed production and the crude oil properties. (author)

  8. Radiation doses and hazards from processing of crude oil at the Tema oil refinery in Ghana

    International Nuclear Information System (INIS)

    Darko, E. O.; Kpeglo, D. O.; Akaho, E. H. K.; Schandorf, C.; Adu, P. A. S.; Faanu, A.; Abankwah, E.; Lawluvi, H.; Awudu, A. R.

    2012-01-01

    Processing of crude oil has been carried out in Ghana for more than four decades without measures to assess the hazards associated with the naturally occurring radionuclides in the raw and processed materials. This study investigates the exposure of the public to 226 Ra, 232 Th and 40 K in crude oil, petroleum products and wastes at the Tema oil refinery in Ghana using gamma-ray spectrometry. The study shows higher activity concentrations of the natural radionuclides in the wastes than the crude oil and the products with estimated hazard indices less than unity. The values obtained in the study are within recommended limits for public exposure indicating that radiation exposure from processing of the crude oil at the refinery does not pose any significant radiological hazard but may require monitoring to establish long-term effect on both public and workers. (authors)

  9. Radiation doses and hazards from processing of crude oil at the Tema oil refinery in Ghana.

    Science.gov (United States)

    Darko, E O; Kpeglo, D O; Akaho, E H K; Schandorf, C; Adu, P A S; Faanu, A; Abankwah, E; Lawluvi, H; Awudu, A R

    2012-02-01

    Processing of crude oil has been carried out in Ghana for more than four decades without measures to assess the hazards associated with the naturally occurring radionuclides in the raw and processed materials. This study investigates the exposure of the public to (226)Ra, (232)Th and (40)K in crude oil, petroleum products and wastes at the Tema oil refinery in Ghana using gamma-ray spectrometry. The study shows higher activity concentrations of the natural radionuclides in the wastes than the crude oil and the products with estimated hazard indices less than unity. The values obtained in the study are within recommended limits for public exposure indicating that radiation exposure from processing of the crude oil at the refinery does not pose any significant radiological hazard but may require monitoring to establish long-term effect on both public and workers.

  10. Oil type and cross-linking influence growth of Aureobasidium melanogenum on vegetable oils as a single carbon source.

    Science.gov (United States)

    Peeters, Loes H M; Huinink, Hendrik P; Voogt, Benjamin; Adan, Olaf C G

    2018-03-12

    Aureobasidium melanogenum is the main fungus found in a spontaneously formed biofilm on a oil-treated wood. This dark colored biofilm functions as a protective coating. To better understand biofilm formation, in this study A. melanogenum was cultured on olive oil and raw linseed oil. Metabolic activity and oil conversion were measured. The results show that A. melanogenum is able to grow on linseed oil and olive oil as a single carbon source. The fungus produces the enzyme lipase to convert the oil into fatty acids and glycerol. Metabolic activity and oil conversion were equal on linseed oil and olive oil. The fungus was not able to grow on severe cross-linked linseed oil, meaning that the degree of cross-linking of the oil is important for growth of A. melanogenum. Dark coloring of the colony was seen on linseed oil, which might be a stress response on the presence of autoxidation products in linseed oil. The colony on olive oil showed delayed melanin production indicating an inhibitory effect of olive oil on melanin production. © 2018 The Authors. MicrobiologyOpen published by John Wiley & Sons Ltd.

  11. Genotype x environment interactions in Angus, Brahman, and reciprocal cross cows and their calves grazing common bermudagrass and endophyte-infected tall fescue pastures.

    Science.gov (United States)

    Brown, M A; Brown, A H; Jackson, W G; Miesner, J R

    1997-04-01

    Reproductive and preweaning data on 233 Angus (A), Brahman (B), and reciprocal-cross cows (AB, BA) and 455 two- and three-breed cross calves managed on common bermudagrass or endophyte-infected tall fescue were used to evaluate the interaction of forage type with individual and maternal heterosis and maternal and grandmaternal breed effects. Cows were born from 1988 to 1991 and calves from 15 Polled Hereford sires were born from 1991 to 1994. Heterosis for calving rate was similar and important on both forages (P < .01), but maternal effects were small on each forage. Maternal heterosis for birth weight differed between common bermudagrass and tall fescue (P < .10) and grandmaternal effects were evident on bermudagrass (P < .05) but not tall fescue. Forage effects were generally substantial for 205-d weight, weaning hip height, and weaning weight:height ratio (P < .01), and maternal heterosis for these traits was larger on tall fescue than on common bermudagrass (P < .01). Grandmaternal effects were in favor of Angus for 205-d weight, hip height, and weight:height ratio on common bermudagrass (P < .05) but not on tall fescue. Heterosis for 205-d weight per cow exposed was substantial on both forages (P < .01) and was numerically larger on tall fescue than on bermudagrass, but maternal effects were not significant. These results suggest more advantage for Brahman-cross cows over purebreds on endophyte-infected tall fescue than a similar comparison on common bermudagrass. They also suggest an advantage for Angus in grandmaternal effects on bermudagrass but not tall fescue.

  12. Synthesis of novel plant oil derivatives: Furan and Diels-Alder reaction products

    Science.gov (United States)

    Plant oils are useful sustainable raw materials for the development of new chemical products. In this work epoxidized soybean oil was treated with different acids, and variable amounts of furan structures were produced from the epoxidized linoleate moiety. From process studies, the highest yields of...

  13. Overview of Raw Materials for Oil Field Chemicals and Challenges ...

    African Journals Online (AJOL)

    The local content contribution to the oil industry is however presently not up to five percent. The concept of the local content development is not about awarding of contracts to Nigerians with foreign counterparts, but developing and expanding the industry for the benefit of the majority. Comparative study of the local materials ...

  14. Properties of Residue from Olive Oil Extraction as a Raw Material for Sustainable Construction Materials. Part I: Physical Properties

    Directory of Open Access Journals (Sweden)

    Almudena Díaz-García

    2017-01-01

    Full Text Available Action on climate, the environment, and the efficient use of raw materials and resources are important challenges facing our society. Against this backdrop, the construction industry must adapt to new trends and environmentally sustainable construction systems, thus requiring lines of research aimed at keeping energy consumption in new buildings as low as possible. One of the main goals of this research is to efficiently contribute to reducing the amount of residue from olive oil extraction using a two-phase method. This can be achieved by producing alternative structural materials to be used in the construction industry by means of a circular economy. The technical feasibility of adding said residue to ceramic paste was proven by analyzing the changes produced in the physical properties of the paste, which were then compared to the properties of the reference materials manufactured with clay without residue. Results obtained show that the heating value of wet pomace can contribute to the thermal needs of the sintering process, contributing 30% of energy in pieces containing 3% of said material. Likewise, adding larger amounts of wet pomace to the clay body causes a significant decrease in bulk density values.

  15. Properties of Residue from Olive Oil Extraction as a Raw Material for Sustainable Construction Materials. Part I: Physical Properties.

    Science.gov (United States)

    Díaz-García, Almudena; Martínez-García, Carmen; Cotes-Palomino, Teresa

    2017-01-25

    Action on climate, the environment, and the efficient use of raw materials and resources are important challenges facing our society. Against this backdrop, the construction industry must adapt to new trends and environmentally sustainable construction systems, thus requiring lines of research aimed at keeping energy consumption in new buildings as low as possible. One of the main goals of this research is to efficiently contribute to reducing the amount of residue from olive oil extraction using a two-phase method. This can be achieved by producing alternative structural materials to be used in the construction industry by means of a circular economy. The technical feasibility of adding said residue to ceramic paste was proven by analyzing the changes produced in the physical properties of the paste, which were then compared to the properties of the reference materials manufactured with clay without residue. Results obtained show that the heating value of wet pomace can contribute to the thermal needs of the sintering process, contributing 30% of energy in pieces containing 3% of said material. Likewise, adding larger amounts of wet pomace to the clay body causes a significant decrease in bulk density values.

  16. [Reflection on developing bio-energy industry of large oil company].

    Science.gov (United States)

    Sun, Haiyang; Su, Haijia; Tan, Tianwei; Liu, Shumin; Wang, Hui

    2013-03-01

    China's energy supply becomes more serious nowadays and the development of bio-energy becomes a major trend. Large oil companies have superb technology, rich experience and outstanding talent, as well as better sales channels for energy products, which can make full use of their own advantages to achieve the efficient complementary of exist energy and bio-energy. Therefore, large oil companies have the advantages of developing bio-energy. Bio-energy development in China is in the initial stage. There exist some problems such as available land, raw material supply, conversion technologies and policy guarantee, which restrict bio-energy from industrialized development. According to the above key issues, this article proposes suggestions and methods, such as planting energy plant in the marginal barren land to guarantee the supply of bio-energy raw materials, cultivation of professional personnel, building market for bio-energy counting on large oil companies' rich experience and market resources about oil industry, etc, aimed to speed up the industrialized process of bio-energy development in China.

  17. Association Analysis of Simple Sequence Repeat (SSR Markers with Agronomic Traits in Tall Fescue (Festuca arundinacea Schreb..

    Directory of Open Access Journals (Sweden)

    Yanhong Lou

    Full Text Available Tall fescue is widely used in temperate regions throughout the world as a dominant forage grass as well as a turfgrass, in pastoral and turf industry. However, the utilization of tall fescue was limited because of its leaf roughness, poor regeneration ability and poor stress resistance. New cultivars were desirable in modern pastoral industries exceed the potential of existing cultivars. Therefore, well understanding the agronomic traits and describing germplasms would help to overcome these constraints, and morphological evaluation of tall fescue germplasm is the key component in selecting rational parents for hybridization breeding. However, describing the morphological traits of tall fescue germplasm is costly and time-consuming. Fortunately, biotechnology approaches can supplement conventional breeding efforts for tall fescue improvement. Association mapping, as a powerful approach to identify association between agronomic traits and molecular markers has been widely used for enhancing the utilization, conservation and management of the tall fescue germplasms. Therefore, in the present research, 115 tall fescue accessions from different origins (25 accessions are cultivars; 31 accessions from America; 32 accessions from European; 7 accessions from Africa; 20 accessions from Asia, were evaluated for agronomic traits and genetic diversity with 90 simple sequence repeat (SSR markers. The panel displayed significant variation in spike count per plant (SCP and spike weight (SW. However, BCS performed the lowest CV among all the observed agronomic traits. Three subpopulations were identified within the collections but no obvious relative kinship (K was found. The GLM model was used to describe the association between SSR and agronomic traits. Fifty-one SSR markers associated with agronomic traits were observed. Twelve single-associated markers were associated with PH; six single-associated markers were associated with BCS; eight single

  18. The use of plasticizing additives based on recycled raw materials in the petrochemical rubber mixtures

    Directory of Open Access Journals (Sweden)

    Z. S. Shashok

    2016-01-01

    Full Text Available At present, the development of alternative products for elastomers based on recycling petrochemical raw materials is a new trend of the rubber industry progress. Petrochemical raw materials include spent lubricants and motor oils are among such recycling products. In this context, the influence of the products of recycling waste engine oil (DVCH and RA in comparison with industrial oil (I-20 on the technological properties of filled elastomeric compositions was investigated. The elastomeric compositions were based on poly isoprene and divinyl rubbers. The plasticizing components were manufactured by IOOO “DVCH-Menedzhment”. They are mixture of hydro-carbons, C16–C20 and differ from each other in the content of linear and branched paraffin. Plastic-elastic properties of rubber compounds on the shear disk viscometer MV2000 in accordance with GOST 10722–76 was carried out. Kinetics of vulcanization on the rheometer ODR2000 according to GOST 12535–84 was defined. It is shown that the introduction of RA test plasticizing component provides a significant effect on Mooney viscosity, as compared to elastomeric compositions containing a plasticizer and I-20 and plasticizing additive DVCH. It revealed that the administration of all components in the studied plasticizing elastomer compositions based on a combination poly isoprene and divinyl rubbers has no significant effect on the rate of relaxation of stress of rubber compounds. It is found that elastomeric compositions containing as additives investigated processing waste oil products (DVCH and RA are characterized by a slightly smaller value of time to reach an optimal degree of vulcanization.

  19. Long-term measurements (2010–2014 of carbonaceous aerosol and carbon monoxide at the Zotino Tall Tower Observatory (ZOTTO in central Siberia

    Directory of Open Access Journals (Sweden)

    E. F. Mikhailov

    2017-12-01

    Full Text Available We present long-term (5-year measurements of particulate matter with an upper diameter limit of ∼ 10 µm (PM10, elemental carbon (EC, organic carbon (OC, and water-soluble organic carbon (WSOC in aerosol filter samples collected at the Zotino Tall Tower Observatory in the middle-taiga subzone (Siberia. The data are complemented with carbon monoxide (CO measurements. Air mass back trajectory analysis and satellite image analysis were used to characterise potential source regions and the transport pathway of haze plumes. Polluted and background periods were selected using a non-parametric statistical approach and analysed separately. In addition, near-pristine air masses were selected based on their EC concentrations being below the detection limit of our thermal–optical instrument. Over the entire sampling campaign, 75 and 48 % of air masses in winter and in summer, respectively, and 42 % in spring and fall are classified as polluted. The observed background concentrations of CO and EC showed a sine-like behaviour with a period of 365 ± 4 days, mostly due to different degrees of dilution and the removal of polluted air masses arriving at the Zotino Tall Tower Observatory (ZOTTO from remote sources. Our analysis of the near-pristine conditions shows that the longest periods with clean air masses were observed in summer, with a frequency of 17 %, while in wintertime only 1 % can be classified as a clean. Against a background of low concentrations of CO, EC, and OC in the near-pristine summertime, it was possible to identify pollution plumes that most likely came from crude-oil production sites located in the oil-rich regions of Western Siberia. Overall, our analysis indicates that most of the time the Siberian region is impacted by atmospheric pollution arising from biomass burning and anthropogenic emissions. A relatively clean atmosphere can be observed mainly in summer, when polluted species are removed by precipitation and

  20. Parsing and Quantification of Raw Orbitrap Mass Spectrometer Data Using RawQuant.

    Science.gov (United States)

    Kovalchik, Kevin A; Moggridge, Sophie; Chen, David D Y; Morin, Gregg B; Hughes, Christopher S

    2018-06-01

    Effective analysis of protein samples by mass spectrometry (MS) requires careful selection and optimization of a range of experimental parameters. As the output from the primary detection device, the "raw" MS data file can be used to gauge the success of a given sample analysis. However, the closed-source nature of the standard raw MS file can complicate effective parsing of the data contained within. To ease and increase the range of analyses possible, the RawQuant tool was developed to enable parsing of raw MS files derived from Thermo Orbitrap instruments to yield meta and scan data in an openly readable text format. RawQuant can be commanded to export user-friendly files containing MS 1 , MS 2 , and MS 3 metadata as well as matrices of quantification values based on isobaric tagging approaches. In this study, the utility of RawQuant is demonstrated in several scenarios: (1) reanalysis of shotgun proteomics data for the identification of the human proteome, (2) reanalysis of experiments utilizing isobaric tagging for whole-proteome quantification, and (3) analysis of a novel bacterial proteome and synthetic peptide mixture for assessing quantification accuracy when using isobaric tags. Together, these analyses successfully demonstrate RawQuant for the efficient parsing and quantification of data from raw Thermo Orbitrap MS files acquired in a range of common proteomics experiments. In addition, the individual analyses using RawQuant highlights parametric considerations in the different experimental sets and suggests targetable areas to improve depth of coverage in identification-focused studies and quantification accuracy when using isobaric tags.

  1. Subsidy modes, waste cooking oil and biofuel: Policy effectiveness and sustainable supply chains in China

    International Nuclear Information System (INIS)

    Zhang, Huiming; Li, Lianshui; Zhou, Peng; Hou, Jianmin; Qiu, Yueming

    2014-01-01

    Many countries are concerned with the waste-to-energy for economic development and societal welfare. This paper constructs a dynamic game model that, for the first time compares the incentive effects of four common subsidy modes on waste cooking oil supply for biofuel refining and sales of waste cooking oil refined products. The model considers the impact of preferential tax treatment, a raw material subsidy, a sales subsidy and an investment subsidy on the profits of biofuel enterprises and waste cooking oil recyclers. Results indicate that common approaches adopted in developed economies such as raw material price subsidies and finished products sales subsidies increase the profits of both biofuel enterprises and recyclers. On the contrary, investment subsidies, which are relatively common in some regions of China, increase the profits of recyclers, while reducing revenues achieved by biofuel enterprises. To promote the supply chain, policy should give priority to raw material price subsidies and finished products sales subsidies, and for investment subsidies, however, the government should be cautious

  2. Characterization of oil shale, isolated kerogen, and post-pyrolysis residues using advanced 13 solid-state nuclear magnetic resonance spectroscopy

    Science.gov (United States)

    Cao, Xiaoyan; Birdwell, Justin E.; Chappell, Mark A.; Li, Yuan; Pignatello, Joseph J.; Mao, Jingdong

    2013-01-01

    Characterization of oil shale kerogen and organic residues remaining in postpyrolysis spent shale is critical to the understanding of the oil generation process and approaches to dealing with issues related to spent shale. The chemical structure of organic matter in raw oil shale and spent shale samples was examined in this study using advanced solid-state 13C nuclear magnetic resonance (NMR) spectroscopy. Oil shale was collected from Mahogany zone outcrops in the Piceance Basin. Five samples were analyzed: (1) raw oil shale, (2) isolated kerogen, (3) oil shale extracted with chloroform, (4) oil shale retorted in an open system at 500°C to mimic surface retorting, and (5) oil shale retorted in a closed system at 360°C to simulate in-situ retorting. The NMR methods applied included quantitative direct polarization with magic-angle spinning at 13 kHz, cross polarization with total sideband suppression, dipolar dephasing, CHn selection, 13C chemical shift anisotropy filtering, and 1H-13C long-range recoupled dipolar dephasing. The NMR results showed that, relative to the raw oil shale, (1) bitumen extraction and kerogen isolation by demineralization removed some oxygen-containing and alkyl moieties; (2) unpyrolyzed samples had low aromatic condensation; (3) oil shale pyrolysis removed aliphatic moieties, leaving behind residues enriched in aromatic carbon; and (4) oil shale retorted in an open system at 500°C contained larger aromatic clusters and more protonated aromatic moieties than oil shale retorted in a closed system at 360°C, which contained more total aromatic carbon with a wide range of cluster sizes.

  3. Strategies for displacing oil

    Science.gov (United States)

    Rao, Vikram; Gupta, Raghubir

    2015-03-01

    Oil currently holds a monopoly on transportation fuels. Until recently biofuels were seen as the means to break this stranglehold. They will still have a part to play, but the lead role has been handed to natural gas, almost solely due to the increased availability of shale gas. The spread between oil and gas prices, unprecedented in its scale and duration, will cause a secular shift away from oil as a raw material. In the transport fuel sector, natural gas will gain traction first in the displacement of diesel fuel. Substantial innovation is occurring in the methods of producing liquid fuel from shale gas at the well site, in particular in the development of small scale distributed processes. In some cases, the financing of such small-scale plants may require new business models.

  4. Genome-wide SNP identification in multiple morphotypes of allohexaploid tall fescue (Festuca arundinacea Schreb

    Directory of Open Access Journals (Sweden)

    Hand Melanie L

    2012-06-01

    Full Text Available Abstract Background Single nucleotide polymorphisms (SNPs provide essential tools for the advancement of research in plant genomics, and the development of SNP resources for many species has been accelerated by the capabilities of second-generation sequencing technologies. The current study aimed to develop and use a novel bioinformatic pipeline to generate a comprehensive collection of SNP markers within the agriculturally important pasture grass tall fescue; an outbreeding allopolyploid species displaying three distinct morphotypes: Continental, Mediterranean and rhizomatous. Results A bioinformatic pipeline was developed that successfully identified SNPs within genotypes from distinct tall fescue morphotypes, following the sequencing of 414 polymerase chain reaction (PCR – generated amplicons using 454 GS FLX technology. Equivalent amplicon sets were derived from representative genotypes of each morphotype, including six Continental, five Mediterranean and one rhizomatous. A total of 8,584 and 2,292 SNPs were identified with high confidence within the Continental and Mediterranean morphotypes respectively. The success of the bioinformatic approach was demonstrated through validation (at a rate of 70% of a subset of 141 SNPs using both SNaPshot™ and GoldenGate™ assay chemistries. Furthermore, the quantitative genotyping capability of the GoldenGate™ assay revealed that approximately 30% of the putative SNPs were accessible to co-dominant scoring, despite the hexaploid genome structure. The sub-genome-specific origin of each SNP validated from Continental tall fescue was predicted using a phylogenetic approach based on comparison with orthologous sequences from predicted progenitor species. Conclusions Using the appropriate bioinformatic approach, amplicon resequencing based on 454 GS FLX technology is an effective method for the identification of polymorphic SNPs within the genomes of Continental and Mediterranean tall fescue. The

  5. Performance, forage utilization, and ergovaline consumption by beef cows grazing endophyte fungus-infected tall fescue, endophyte fungus-free tall fescue, or orchardgrass pastures.

    Science.gov (United States)

    Peters, C W; Grigsby, K N; Aldrich, C G; Paterson, J A; Lipsey, R J; Kerley, M S; Garner, G B

    1992-05-01

    Two 120-d trials (May to September, 1988 and 1989) determined the effects of grazing tall fescue (two varieties) or orchardgrass on forage intake and performance by beef cows. Each summer, 48 cow-calf pairs grazed endophyte-infected Kentucky-31 tall fescue (KY-31), endophyte-free Mozark tall fescue (MOZARK), or Hallmark orchardgrass (OG) pastures (16 pairs/treatment). Forage OM intakes and digestibilities were determined during June and August each year. Cow and calf BW and milk production were determined every 28 d. During June of both years, OM intakes did not differ (P greater than .10) among treatments. During August of 1988, intakes were 18% lower (P less than .05) by KY-31 cows (1.6% of BW) than by MOZARK or OG cows (average 1.95% of BW); however, no differences (P greater than .10) were measured in August of 1989. Estimates of ergovaline consumption during June from KY-31 were between 4.2 (1988) and 6.0 mg/d (1989), whereas August estimates were between 1.1 (1988) and 2.8 mg/d (1989). Ergovaline in MOZARK estrusa was below detection limits, except in August of 1989. Cows that grazed KY-31 lost three times (P less than .01) more BW than cows that grazed MOZARK or OG (42 vs 9 and 13 kg, respectively). Milk production by KY-31 cows was 25% lower (P less than .01) than that by cows that grazed MOZARK or OG (6.0 vs average of 8.0 kg/d). Similarly, slower (P less than .01) calf gains were noted for KY-31 than for MOZARK or OG (.72 vs .89 and .88 kg/d, respectively). Cows grazing KY-31 experienced accelerated BW loss and reduced milk production and weaned lighter calves than did cows grazing MOZARK or OG. Decreased performance was not explained by consistently reduced forage intakes; hence, altered nutrient utilization was suspected.

  6. Molecular characterisation and interpretation of genetic diversity within globally distributed germplasm collections of tall fescue (Festuca arundinacea Schreb.) and meadow fescue (F. pratensis Huds.).

    Science.gov (United States)

    Hand, Melanie L; Cogan, Noel O I; Forster, John W

    2012-04-01

    Allohexaploid tall fescue (Festuca arundinacea Schreb. syn. Lolium arundinaceum [Schreb.] Darbysh.) is an agriculturally important grass cultivated for pasture and turf world-wide. Genetic improvement of tall fescue could benefit from the use of non-domesticated germplasm to diversify breeding populations through the incorporation of novel and superior allele content. However, such potential germplasm must first be characterised, as three major morphotypes (Continental, Mediterranean and rhizomatous) with varying degrees of hybrid interfertility are commonly described within this species. As hexaploid tall fescue is also a member of a polyploid species complex that contains tetraploid, octoploid and decaploid taxa, it is also possible that germplasm collections may have inadvertently sampled some of these sub-species. In this study, 1,040 accessions from the publicly available United States Department of Agriculture tall fescue and meadow fescue germplasm collections were investigated. Sequence of the chloroplast genome-located matK gene and the nuclear ribosomal DNA internal transcribed spacer (rDNA ITS) permitted attribution of accessions to the three previously known morphotypes and also revealed the presence of tall fescue sub-species of varying ploidy levels, as well as other closely related species. The majority of accessions were, however, identified as Continental hexaploid tall fescue. Analysis using 34 simple sequence repeat markers was able to further investigate the level of genetic diversity within each hexaploid tall fescue morphotype group. At least two genetically distinct sub-groups of Continental hexaploid tall fescue were identified which are probably associated with palaeogeographic range expansion of this morphotype. This work has comprehensively characterised a large and complex germplasm collection and has identified genetically diverse accessions which may potentially contribute valuable alleles at agronomic loci for tall fescue cultivar

  7. Raw material boom in an industrial country. Rohstoffboom in einem Industrieland

    Energy Technology Data Exchange (ETDEWEB)

    Enders, K S

    1984-01-01

    First of all, a theoretical investigation is carried out to discover under which conditions a raw material boom displaces traditional sectors of industry, and which groups win and lose in the process. Subsequently, the peculiarities of the adaption process induced by the boom are analysed. Particular attention is paid to the possibility of transition (short-term) unemployment (Dutch disease). In conclusion, Norway's experiences in the oil and gas boom in the North Sea ar described and then compared with theoretical statements.

  8. Energies and raw materials. The energy situation; Energies et matieres premieres. Conjoncture energetique

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-01

    Statistics are given on the energy and raw materials (coal, oil, etc.) production and consumption levels in France in October 1997: primary energy total consumption has increased (mobile year) of 0.8%, at the same rate since 3 years. Interior demand has varied depending on the energy: strong decrease for coal (- 8.1%), slight increase for petroleum products (+ 1.3%), slowing down increase for gas (+ 2.1%) and moderate increase for electricity (+ 1.4%). An increase in the dollar exchange rate and a high level of oil and gas imports have induced a high energy cost level with + 22% on one year, reaching 87.8 billions Francs, to be compared to 72.0 in October 1996

  9. Energies and raw materials. The energy situation; Energies et matieres premieres. Conjoncture energetique

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    Statistics are given on the energy and raw materials (coal, oil, etc.) production and consumption levels in France in September 1997: primary energy total consumption has increased (mobile year) of 1.1%, at the same rate since 3 years. Interior demand has varied depending on the energy: strong decrease for coal (- 5.9%), slight increase for petroleum products (+ 0.8%), strong increase for gas (+ 3.2%) and moderate increase for electricity (+ 1.7%). An increase in the dollar exchange rate and a high level of oil and gas imports have induced a record energy cost level with + 30% on one year, reaching 89.2 billions Francs, to be compared to 68.5 in September 1996

  10. Oil? Finally, a product like the others

    International Nuclear Information System (INIS)

    Moreau Defarges, Philippe

    2006-01-01

    As oil is generally considered as a vital element for production and consumption system, without which the one who hasn't any could not live, the author examines whether oil is actually an exceptional raw product which would escape from market rules according to which everything depends on the market and work is the only source of value and power. In order to do so, he discusses whether the present oil price increase is a good or a bad news, whether this increase confirms that oil is finally a product like the others, whether it has been and is a reason for war, and whether oil will remain (if it has ever been) a major geopolitical issue or, in other words, a determining factor of alliances and antagonism

  11. Strategic raw materials. Risk management

    International Nuclear Information System (INIS)

    Bertau, Martin; Matschullat, Joerg; Kausch, Peter

    2014-01-01

    This volume is divided into four chapters: (1) Raw material management, (2) Primary raw materials, (3) Secondary raw materials and recycling, (4). Processing and products. The topics for the chapter ''Raw material management'' are: Substitution of raw materials - framework conditions and implementation; Thales: Strategic raw materials; Time for cooperation between the EU and China in raw materials policy; Availability of elements for the semiconductor industry; Market price risks of raw material-intensive companies - identification and management. The topics on the second item ''Primary raw materials'' are: The supply of economic-critical raw materials - A search and analysis for causes; Lithium extraction from primary raw materials - state and perspectives; The global market of rare earths - A balancing act; Rare earth deposits in Namibia; New technologies in exploration and discovery - Focus on activities in Europe. The third chapter, ''Secondary Raw Materials and Recycling'', covered the topics: Technology metals - Systemic Requirements along the recycling chain; Integrated re-use of high-tech and greentech wastes; From the sewage sludge ash to the phosphorus fertilizer RecoPhos P38 in the stress field of waste, fertilizer and soil protection. In chapter 4. ''Processing and products'' are the topics: Treatment and processing of rare earth metals; Processing of mineral resources - opportunities and challenges; Consequences of modern germanium chemistry; Strategic resources - Risk management. A review and outlook with a pinch of fantasy.. [de

  12. Responses of a tall building in Los Angeles, California as inferred from local and distant earthquakes

    Science.gov (United States)

    Çelebi, Mehmet; Hasan Ulusoy,; Nori Nakata,

    2016-01-01

    Increasing inventory of tall buildings in the United States and elsewhere may be subjected to motions generated by near and far seismic sources that cause long-period effects. Multiple sets of records that exhibited such effects were retrieved from tall buildings in Tokyo and Osaka ~ 350 km and 770 km from the epicenter of the 2011 Tohoku earthquake. In California, very few tall buildings have been instrumented. An instrumented 52-story building in downtown Los Angeles recorded seven local and distant earthquakes. Spectral and system identification methods exhibit significant low frequencies of interest (~0.17 Hz, 0.56 Hz and 1.05 Hz). These frequencies compare well with those computed by transfer functions; however, small variations are observed between the significant low frequencies for each of the seven earthquakes. The torsional and translational frequencies are very close and are coupled. Beating effect is observed in at least two of the seven earthquake data.

  13. Food Safety and Raw Milk

    Science.gov (United States)

    ... and Food Safety Food Safety Modernization Act Raw Milk Recommend on Facebook Tweet Share Compartir RAW MILK ... Decide? Questions & Answers Outbreak Studies Resources & Publications Raw Milk Infographic [PDF – 1 page] More Resources 5 Raw ...

  14. Characterization of raw and burnt oil shale from Dotternhausen: Petrographical and mineralogical evolution with temperature

    International Nuclear Information System (INIS)

    Thiéry, Vincent; Bourdot, Alexandra; Bulteel, David

    2015-01-01

    The Toarcian Posidonia shale from Dotternhausen, Germany, is quarried and burnt in a fluidized bed reactor to produce electricity. The combustion residue, namely burnt oil shale (BOS), is used in the adjacent cement work as an additive in blended cements. The starting material is a typical laminated oil shale with an organic matter content ranging from 6 to 18%. Mineral matter consists principally of quartz, feldspar, pyrite and clays. After calcination in the range, the resulting product, burnt oil shale, keeps the macroscopic layered texture however with different mineralogy (anhydrite, lime, iron oxides) and the formation of an amorphous phase. This one, studied under STEM, reveals a typical texture of incipient partial melting due to a long retention time (ca. 30 min) and quenching. An in-situ high temperature X-ray diffraction (HTXRD) allowed studying precisely the mineralogical changes associated with the temperature increase. - Highlights: • We present oil shale/burnt oil shale characterization. • The Posidonia Shale is burnt in a fluidized bed. • Mineralogical evolution with temperature is complex. • The burnt oil shale is used in composite cements

  15. Shale Oil Value Enhancement Research

    Energy Technology Data Exchange (ETDEWEB)

    James W. Bunger

    2006-11-30

    Raw kerogen oil is rich in heteroatom-containing compounds. Heteroatoms, N, S & O, are undesirable as components of a refinery feedstock, but are the basis for product value in agrochemicals, pharmaceuticals, surfactants, solvents, polymers, and a host of industrial materials. An economically viable, technologically feasible process scheme was developed in this research that promises to enhance the economics of oil shale development, both in the US and elsewhere in the world, in particular Estonia. Products will compete in existing markets for products now manufactured by costly synthesis routes. A premium petroleum refinery feedstock is also produced. The technology is now ready for pilot plant engineering studies and is likely to play an important role in developing a US oil shale industry.

  16. Building Integrated Active Flow Control: Improving the Aerodynamic Performance of Tall Buildings Using Fluid-Based Aerodynamic Modification

    Science.gov (United States)

    Menicovich, David

    By 2050 an estimated 9 billion people will inhabit planet earth and almost all the growth in the next 40 years will be in urban areas putting tremendous pressure on creating sustainable cities. The rapid increase in population, rise in land value and decrease in plot sizes in cities around the world positions tall or more importantly slender buildings as the best suited building typology to address the increasingly critical demand for space in this pressing urbanization trend. However, the majority of new tall building urban developments have not followed principles of environmental and/or sustainable design and incentives to innovate, both technological and economic, are urgently required. The biggest climatic challenge to the design, construction and performance of tall buildings is wind sensitivity. This challenge is further emphasized seeing two market driven trends: on one hand as urban population grows, land value rises while plot sizes decrease; on the other, more cost effective modular construction techniques are introducing much lighter tall building structures. The combination of the two suggests a potential increase in the slenderness ratio of tall buildings (typically less than 6:1 but stretching to 20:1 in the near future) where not-so-tall but much lighter buildings will be the bulk of new construction in densely populated cities, providing affordable housing in the face of fast urbanization but also introducing wind sensitivity which was previously the problem of a very limited number of super tall buildings to a much larger number of buildings and communities. The proposed research aims to investigate a novel approach to the interaction between tall buildings and their environment. Through this approach the research proposes a new relationship between buildings and the flows around, through and inside them, where buildings could adapt to better control and manage the air flow around them, and consequently produce significant opportunities to reduce

  17. Tomatoes in oil recovery. [Plant waste additives improve yield

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The waste from processing tomato, squash and pepper stalks found unexpected use in recovery of oil. Even a negligible amount thereof in an aqueous solution pumped into an oil-bearing formation turned out to be sufficient to increase the yield. Substances of plant origin, which improve dramatically the oil-flushing properties of water, not only increase the recovery of oil, but reduce the volume of fluid to be pumped into the stratum. The staff of the Institute of Deep Oil and Gas Deposits of the Azerbaijan Academy of Sciences, who proved the technological and economical advantages of using the waste from plant processing, transmitted their findings to the oil workers of Baku. The scientists have concluded that there is a good raw material base in this republic for utilizing this method on oil-bearing formations.

  18. Experiments on natural circulation of lead-bismuth in the TALL test facility

    International Nuclear Information System (INIS)

    Ma, W.M.; Karbojian, A.; Sehgal, B.R.

    2005-01-01

    Full text of publication follows: Lead-bismuth eutectic (LBE) is a potential candidate coolant for next generation liquid metal reactors due to its favorable properties such as being chemical inert and low melting point, in comparison with sodium and lead considered as coolants in FBRs. Having a high atomic number of LBE allows it be well suited as a spallation target for accelerator-driven systems (ADS) which have been proposed for the transmutation of nuclear waste. Due to its strong buoyancy, the LBE-cooled system should also have significant natural circulation, which is desirable for so-called Generation IV nuclear reactors, which like to employ passive safety and reliability. But so far, very little experimental data have been published on the natural circulation thermal-hydraulics of LBE-cooled systems. Motivated by the increasing interest in LBE-cooled fast reactors and ADS, a test facility called Thermal-hydraulic ADS Lead-bismuth Loop (TALL) was designed and constructed at KTH to investigate the thermalhydraulic characteristics of liquid LBE. The facility consists of a primary loop (LBE loop) and a secondary loop (oil loop). The LBE loop consists of sump tank, core tank, expansion tank, heat exchanger, EM pump, EM flowmeter, electric heaters and instrumentation. The heating of LBE in the core tank and its cooling in the heat exchanger allows natural convection flows as should occur in the prototypic vessel. Recently, our experimental study on natural circulation was performed on the TALL test facility. This paper will present the experimental results and analysis. The facility is of 6.8 m height which is comparable to the full height of the LBE heat exchange circuit in the ANSALDO ADS reactor vessel design, and has been scaled for prototypic (power/volume) ratio to represent the main components. Their LBE volume, flow velocity and heating rates correspond to one tube of the heat exchanger design chosen. During the experiments, the main adjustable

  19. The Necessity of a Graded Tariff System between Crude Oil and Oil Products

    Energy Technology Data Exchange (ETDEWEB)

    Kang, B.R. [SK Corporation, Seoul (Korea)

    2002-06-01

    Even though the graded tariff system between crude oil and oil products has been continuously insisted by oil refining companies since the export and import liberalization of 1997, and its necessity has been admitted by the government, press, and academia, the expanded implementation of the graded tariff system has not been yet realized. Some people says that the graded tariff system between crude oil and oil products is a kind of desperate plans, which oil refining companies suggests to stop the importing companies' rapid growth, so it will eventually restrict the competition of the domestic oil market due to the withering of importing companies. However, the graded tariff system between crude oil and oil products should have been enforced in 1997 as a complementary measure of the import liberalization like other industries or the advanced countries' cases. It is the basic tariff principle that the low tariff is levied on raw materials and the high tariff on final products in order to protect domestic industry. The remaining things are just to form the sympathy and to agree socially for the reorganization of tariff structure in the reasonable way. It is not desirable to make a fool mistake such as a proverb; t is too late to shut the stable door after the horse has bolted. owing to the unreasonable tariff system.

  20. Chemical composition and anti-inflammatory effects of essential oil from Farfugium japonicum flower.

    Science.gov (United States)

    Kim, Ji-Young; Oh, Tae-Heon; Kim, Byeong Jin; Kim, Sang-Suk; Lee, Nam Ho; Hyun, Chang-Gu

    2008-01-01

    In this study, the chemical composition and anti-inflammatory activities of hydrodistilled essential oil from Farfugium japonicum were investigated for the first time. The chemical constituents of the essential oil were further analyzed by GC-MS and included 1-undecene (22.43%), 1-nonene (19.83%), beta-caryophyllene (12.26%), alpha-copaene (3.70%), gamma-curcumene (2.86%), germacrene D (2.69%), and 1-decene (2.08%). The effects of the essential oil on nitric oxide (NO) and prostaglandin E2 (PGE(2)) production in lipopolysaccharide (LPS)-activated RAW 264.7 macrophages were also examined. The results indicate that the F. japonicum essential oil is an effective inhibitor of LPS-induced NO and PGE(2) production in RAW 264.7 cells. These inhibitory effects of the F. japonicum essential oil were accompanied by dose-dependent decreases in the iNOS and COX-2 mRNA expression. In order to determine whether F. japonicum essential oil can safely be applied to human skin, the cytotoxic effects of F. japonicum essential oil were determined by colorimetric MTT assays in human dermal fibroblast and keratinocyte HaCaT cells. F. japonicum essential oil exhibited low cytotoxicity at 100 mug/mL. Based on these results, we suggest that F. japonicum essential oil may be considered a potential anti-inflammatory candidate for topical application.

  1. Continuous thermal degradation of pyrolytic oil in a bench scale CSTR reaction system

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kyong Hwan; Nam, Ki Yun [Climate Change Technology Research Division, Korea Institute of Energy Research, 102 Gajeong-ro, Yuseong-gu, Daejeon 305-343 (Korea)

    2010-05-15

    Continuous thermal degradation of two pyrolytic oils with low (LPO) and high boiling point distribution (HPO) was conducted in a constant stirrer tank reactor (CSTR) with bench scale. Raw pyrolytic oil as a reactant was obtained from the commercial rotary kiln pyrolysis plant for municipal plastic waste. The degradation experiment was conducted by temperature programming with 10 C/min of heating rate up to 450 C and then maintained with long lapse time at 450 C. Liquid product was sampled at initial reaction time with different degradation temperatures up to 450 C and then constant interval lapse time at 450 C. The product characteristics over two pyrolytic oils were compared by using a continuous reaction system. As a reactant, heavy pyrolytic oil (HPO) showed higher boiling point distribution than that of diesel and also light pyrolytic oil (LPO) was mainly consisting of a mixture of gasoline and kerosene range components. In the continuous reaction, LPO showed higher yield of liquid product and lower residue than those of HPO. The characteristics of liquid products were influenced by the type of raw pyrolytic oil. Also, the result obtained under degradation temperature programming was described. (author)

  2. Antimicrobial properties of clove essential oil on raw hamburger during storage in freezer

    Directory of Open Access Journals (Sweden)

    S.E Hoseini

    2015-05-01

    Full Text Available Providing safe foods resistant to pathogens as well as replacing chemical preservatives with natural compounds including essential oils has attracted great attention in current studies. The purpose of this study was to investigate the antimicrobial properties of clove’s essential oil on hamburger. For this reason, clove essential oil was extracted by Clevenger apparatus method. Minimum Inhibitory Concentration (MIC of Staphylococcus aureus, Escherichia coli, Candida albicans and Aspergillus niger was measured. The antimicrobial effect of the essence in the concentrations of 0.0015%, 0.01%, 0.1% and 0.15% was examined on hamburger. The samples were examined at 0, 7, 30, 60 and 90 days of cold storage. Sensory characteristics of the samples were assessed through Hedonic method. MICs resulted from the test for S. aureus, E. coli, C. albicans and A. niger were 0.1%, 0.065%, 0.03% and 0.01% (V/V, respectively. The results of microbial examinations indicated that with the increasing of the concentration of clove oil essence and also with the progression of storage time, the microbial load was gradually decreased. According to the sensory assays conducted by the consumers, low concentrations of 0.0015% and maximum of 0.01% were found desirable.

  3. Nano-catalysts for upgrading bio-oil: Catalytic decarboxylation and hydrodeoxygenation

    Science.gov (United States)

    Uemura, Yoshimitsu; Tran, Nga T. T.; Naqvi, Salman Raza; Nishiyama, Norikazu

    2017-09-01

    Bio-oil is a mixture of oxygenated chemicals produced by fast pyrolysis of lignocellulose, and has attracted much attention recently because the raw material is renewable. Primarily, bio-oil can be used as a replacement of heavy oil. But it is not highly recommended due to bio-oil's inferior properties: high acidity and short shelf life. Upgrading of bio-oil is therefore one of the important technologies nowadays, and is categorized into the two: (A) decrarboxylation/decarbonylation by solid acid catalysts and (B) hydrodeoxygenation (HDO) by metallic catalysts. In our research group, decarboxylation of bio-oil by zeolites and HDO of guaiacol (a model compound of bio-oil) have been investigated. In this paper, recent developments of these upgrading reactions in our research group will be introduced.

  4. Overexpression AtNHX1 confers salt-tolerance of transgenic tall ...

    African Journals Online (AJOL)

    Saline soil is a serious problem worldwide, and it is necessary to improve the salt tolerance of plants so as to avoid the progressive deterioration of saline soil. Here we report that over-expression of AtNHX1 improves salt tolerance in transgenic tall fescue. The AtNHX1 gene driven with CaMV35S promoter was constructed ...

  5. Effect of management factors on tiller dynamics in tall fescue: tiller ...

    African Journals Online (AJOL)

    The effect of plant density (row spacing/seeding rate), nitrogen (N) fertilization, cultivar choice and close-down date on tiller initiation in tall fescue (Festuca arundinacea Schreb.), managed for seed production, was examined over two years. In the first season, tiller studies were conducted on eight individual plants in each ...

  6. Comparison of the production of solvent based on fossil and renewable raw material with regard to their VOC-emissions

    International Nuclear Information System (INIS)

    Moederl, U.

    1993-10-01

    There are three principle ways for the treatment of phytogenic raw materials: biotechnological processes, pyrolysis and gasification, and the utilisation of phytogenic oils and resins. Because of the last possibility the evaporation times of these compounds were modelled to be able to classify these emissions either natural or not. A rough estimation shows that α-Pinen as the main component of Austrian turpentine oil evaporates within one month - which is much faster than the minimum time for rot. The consequence is that the use of these solvents does not effect the total VOC-emissions because they may be considered as delayed biogenic emissions at different locations. The comparison of the biotechnological processes is done for the following solvents which are also most important basic chemicals for other organic technologies: methanol, ethanol, and methane. The emissions of the production of acetone and butanol can only be estimated in comparison to ethanol. The least amount of VOC-emissions for the production of ethanol is released by using sugar-beet as raw material. The emissions are only insignificantly higher by starting from crude-oil and setting the balance boundaries to Austria. Using wheat is worse and calculating all emissions of the crude-oil processes - including the emissions abroad - is worst. There is no significant difference between conventional and organic farming. (Suda)

  7. Oil analysis in machine diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Vaehaeoja, P.

    2006-07-01

    spilled into the soil during use and in accident situations, and they can migrate to groundwater layers. Biodegradation of oils can remove them from the soil or water completely or at least diminish the amount of harmful substances. An automatic, respirometric BOD OxiTop method was used to evaluate the biodegradability of various oils in water and soil media. The biodegradation of certain bio and mineral hydraulic oils was evaluated in groundwater, where bio oils usually biodegraded more effectively than mineral oils. The use of oils in machines weakened especially the biodegradability of bio oils. Biodegradability of bio oils was also studied in standard conditions of OECD 301 F and bio oils usually biodegraded moderately good in these conditions. The biodegradation of forestry chain oils and wood preservative oils was evaluated in forest soils. Linseed oil biodegraded moderately, but certain experimental wood preservatives biodegraded more effectively. Widely used creosote oil biodegraded in a lesser degree. Rapeseed oil-based chain oils biodegraded more effectively than corresponding tall oil. (orig.)

  8. Prevalence of Arcobacter spp. in raw milk and retail raw meats in northern Ireland

    DEFF Research Database (Denmark)

    Scullion, R.; Harrington, C.S.; Madden, R.H.

    2006-01-01

    A 1-year study was undertaken to determine the prevalence of Arcobacter spp. in raw milk and retail raw meats on sale in Northern Ireland. Retail raw poultry samples (n = 94), pork samples (n = 101), and beef samples (n = 108) were obtained from supermarkets in Northern Ireland, and raw milk samp...... from raw milk samples. Arcobacter cryaerophilus was detected less frequently, and Arcobacter skirrowii was detected only as a cocontaminant. To our knowledge, this is the first report of Arcobacter spp. prevalence in a diverse range of products of animal origin in Northern Ireland....

  9. An experiment of used palm oil refinery using the value engineering method

    Science.gov (United States)

    Sumiati; Waluyo, M.

    2018-01-01

    Palm Oil is one of prime materials which very necessary for Indonesia. In the development of palm oil industry the constraint which faced is raw material availability and the economic crisis that attack Indonesia which cause increasing of cost industry so that the salaes price become very expensive . With using alternative raw material namely used palm oil them be made palm oil design to solve this problems. In the designing which comply the consideration of good pal oil planning aspect be use value engineer study. While the criteria parameter of hygienic palm oil which obtained from the questioner area free fatty acid, water content, Iodine number, peroxide number, odor, taste and the color. The research which use value engineer study is throught any phase that is information phase, analyzes phase, creative phase, development phase and presentation phase. This research began with doing the identification of palm oil demand, continued by methodology development in order to measure oil design. By using creative process could be obtained flow rate position, the amount of adsorbent and the best settling time for palm oil alternative that is in the flow rate 70 ml/sec, 4% of adsorbent and the 70 minute for the settling time with free fatty acid value: 0.299. While the best palm oil alternative are palm oil with free fatty acid value = 0.299, water content = 0.31, Iodine number = 40.08, Peroxide number = 3.72, odor and taste = Normal, the color = Normal. The Evalution which done by value engineer study generate the value from alternative palm oil is 1.330 and market palm oil 1.392. Thus, can be conclude thet the value engineer study can be good implemented in the alternative palm oil planning so that alternative palm oil can be produced largely because they have better value that market palm oil and appropriate for little industries.

  10. Determination of the physical characteristics of vegetable oils

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Danielle Oliveira de; Andrade, Ednilton Tavares de; Pereira, Roberto Guimaraes [Universidade Federal Fluminense (TER/UFF), Niteroi, RJ (Brazil). Dept. de Engenharia Agricola e do Meio Ambiente; Tulcan, Oscar Edwin Piamba [Universidade Nacional da Colombia (UNAL), Bogota (Colombia). Fac de Ingenieria

    2008-07-01

    The objective of this work was the characterization of vegetable oils of canola, sunflower, corn and soybean through corrosion, kinematic viscosity, density, cloud point and flow point tests. Vegetable oils are used as raw material for preparation of biofuels or as fuel diesel additive or substitute. The vegetable oils tested showed a low level of corrosion, kinematic viscosities are measured in the range of 31 to 36 mm{sup 2}.s{sup -1}, density was tested at 15 and 20 deg C and showed results varying in the third decimal order. For the oils tested, the cloud point is around 0 deg C and the flow point around -17 deg C. (author)

  11. Highly efficient procedure for the transesterification of vegetable oil

    Energy Technology Data Exchange (ETDEWEB)

    Liang, Xuezheng; Gao, Shan; He, Mingyuan [Shanghai Key Laboratory of Green Chemistry and Chemical Process, Department of Chemistry, East China Normal University, Shanghai 200062 (China); Yang, Jianguo [Shanghai Key Laboratory of Green Chemistry and Chemical Process, Department of Chemistry, East China Normal University, Shanghai 200062 (China); Energy Institute, Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA 16802 (United States)

    2009-10-15

    The highly efficient procedure has been developed for the synthesis of biodiesel from vegetable oil and methanol. The KF/MgO has been selected as the most efficient catalyst for the reactions with the yield of 99.3%. Operational simplicity, without need of the purification of raw vegetable oil, low cost of the catalyst used, high activities, no saponification and reusability are the key features of this methodology. (author)

  12. Studies on the utilization of PETROSIX process pyrolysed oil shale for pozzolans production

    Energy Technology Data Exchange (ETDEWEB)

    Fonseca, M C; Souza Santos, P de; Schmal, M

    1984-08-01

    It was studied the possibility of utilization the PETROSIX Process pyrolised oil-shale as a raw material in the production of cementing materials emphasizing its use as pozzolan. Analysis of X-ray diffraction and spectrophotometry were used to determine the pozzolanic characteristics of the pyrolysed oil-shale. (Author).

  13. Cyclone oil shale retorting concept. [Use it all retorting process

    Energy Technology Data Exchange (ETDEWEB)

    Harak, A.E.; Little, W.E.; Faulders, C.R.

    1984-04-01

    A new concept for above-ground retorting of oil shale was disclosed by A.E. Harak in US Patent No. 4,340,463, dated July 20, 1982, and assigned to the US Department of Energy. This patent titled System for Utilizing Oil Shale Fines, describes a process wherein oil shale fines of one-half inch diameter and less are pyrolyzed in an entrained-flow reactor using hot gas from a cyclone combustor. Spent shale and supplemental fuel are burned at slagging conditions in this combustor. Because of fines utilization, the designation Use It All Retorting Process (UIARP) has been adopted. A preliminary process engineering design of the UIARP, analytical tests on six samples of raw oil shale, and a preliminary technical and economic evaluation of the process were performed. The results of these investigations are summarized in this report. The patent description is included. It was concluded that such changes as deleting air preheating in the slag quench and replacing the condenser with a quench-oil scrubber are recognized as being essential. The addition of an entrained flow raw shale preheater ahead of the cyclone retort is probably required, but final acceptance is felt to be contingent on some verification that adequate reaction time cannot be obtained with only the cyclone, or possibly some other twin-cyclone configuration. Sufficient raw shale preheating could probably be done more simply in another manner, perhaps in a screw conveyor shale transporting system. Results of the technical and economic evaluations of Jacobs Engineering indicate that further investigation of the UIARP is definitely worthwhile. The projected capital and operating costs are competitive with costs of other processes as long as electric power generation and sales are part of the processing facility.

  14. Jatropha Oil Derived Sophorolipids: Production and Characterization as Laundry Detergent Additive

    OpenAIRE

    Joshi-Navare, Kasturi; Khanvilkar, Poonam; Prabhune, Asmita

    2013-01-01

    Sophorolipids (SLs) are glycolipidic biosurfactants suitable for various biological and physicochemical applications. The nonedible Jatropha oil has been checked as the alternative raw material for SL synthesis using C. bombicola (ATCC22214). This is useful towards lowering the SL production cost. Through optimization of fermentation parameters and use of resting cell method, the yield 15.25 g/L could be achieved for Jatropha oil derived SL (SLJO) with 1% v/v oil feeding. The synthesized SL d...

  15. Colombian fusel oil

    Directory of Open Access Journals (Sweden)

    Natalia Montoya

    2016-05-01

    Full Text Available By-products valorization in bio-fuels industry is an important issue for making the global process more efficient, more profitable and closer to the concept of biorefinery. Fusel oil is a by-product of bioethanol production that can be considered as an inexpensive and renewable raw material for manufacturing value-added products. In this work, results in terms of composition and physicochemical properties of six samples of fusel oil from industrial alcohol facilities are presented. Composition of the main components was established by gas chromatography. Complementary techniques, such as headspace solid-phase microextraction and gas chromatography–mass spectrometry (GC-MS, were used for detection of minor components. Fifty-five compounds were identified. Physicochemical properties such as density, acid value, moisture content and true boiling point curves were determined. Results are useful in the conceptual design of separation strategies for recovering higher alcohols, as well as to consider new options of valorization alternatives for fusel oil.

  16. Energies and raw materials. The energy situation; Energies et matieres premieres. Conjoncture energetique

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    Statistics are given on the energy and raw materials (coal, oil, etc.) production and consumption levels in France in November 1997: primary energy total consumption has increased (mobile year) of 0.6%, at a slightly inferior rate than the rate since 3 years. Interior demand has varied depending on the energy: strong decrease for coal (- 9.3%), slight increase for petroleum products (+ 1.2%), markedly slowing down increase for gas (+ 1.4%) and moderate increase for electricity (+ 1.3%). An increase in the dollar exchange rate and a high level of oil and gas imports have induced a maintained high energy cost level with + 14% on one year, reaching 86.8 billions Francs, to be compared to 76.1 in November 1996

  17. Effects of gamma irradiation on raw materials and perfumes

    International Nuclear Information System (INIS)

    Guillot, M.; Pelpel, A.

    1983-01-01

    In order to enlight the strange problem of apparent perfume stability observed in manufactured talc powders sterilized by gamma rays, investigations were made on samples of odorant substances (raw materials, essential oils, or elaborated mixtures). As a rule, no immediate adulteration of olfactive caracteristics resulted at once from gamma irradiation. In several cases, a stabilizing effect appeared immediately and remained effective after long storage in various conditions (of temperature, or light, or oxygen exposure). This unexpected effect seems to be in accordance with previous experiments on gamma or electron irradiations of mixtures of organic molecules, reported in litterature: a mutual inhibition was observed to take place [fr

  18. Mäetaguse mõisa tall-tõllakuuri ümberehitamine hotelliks / Ermo Reiska

    Index Scriptorium Estoniae

    Reiska, Ermo

    2006-01-01

    Muinsuskaitse eritingimused: A. Pantelejev. Projekt: AS Restor. Ehitaja: OÜ Vet Ehitus Grupp. Muinsuskaitseline järelevalve: OÜ Zoroaster, Aivo Raud. Tall-tõllakuuri ümberehitamisel hotelliks "Meintack" säilitati hoone ajaloolistes gabariitides, restaureeriti fassaadid, taastati endine kelpkatus ning ühendati juurdeehituse abil endise veskihoonega

  19. Genetic Relationships among Tall Coconut Palm (Cocos nucifera L. Accessions of the International Coconut Genebank for Latin America and the Caribbean (ICG-LAC, Evaluated Using Microsatellite Markers (SSRs.

    Directory of Open Access Journals (Sweden)

    Carina Mendes Loiola

    Full Text Available The diversity and genetic relationships among two accessions of tall coconut palms collected in Brazil and seven accessions introduced from different geographic regions of the world were analyzed using 25 microsatellite primers, 19 of which were polymorphic and detected between 4 and 10 alleles per locus, with an average of 6.57. The observed and expected heterozygosity ranged from 0.25 and 0.40 in the Rennell Islands Tall (RIT accession to 0.54 and 0.62 in the Polynesian Tall (PYT accession. The analysis of genetic structure resulted in the formation of five distinct groups. The first group was formed by the accessions Brazilian Tall-Praia do Forte (BRTPF, Brazilian Tall-Merepe (BRTMe and West African Tall (WAT; the second group consisted of Malaysian Tall (MLT; the third group of RIT; the fourth group of Vanuatu Tall (VTT; and the fifth group of Rotuman Tall (RTMT, Tonga Tall (TONT and PYT. The dendrogram based on the nearest-neighbor method detected the formation of two main groups and five subgroups, indicating that the genetic relationships of the accessions are based on their geographic regions of origin. The analyses revealed genetic relationships between the accessions collected in Brazil and the accession from Africa, and among palms from South East Asia and the South Pacific, confirming the common origin of these accessions. The information obtained in this study can guide decisions on germplasm conservation activities and the efficient selection of genetically divergent parents for use in coconut breeding programs in Brazil, which are attempting to select for disease resistance, mainly to lethal yellowing, among other characteristics.

  20. Genetic Relationships among Tall Coconut Palm (Cocos nucifera L.) Accessions of the International Coconut Genebank for Latin America and the Caribbean (ICG-LAC), Evaluated Using Microsatellite Markers (SSRs).

    Science.gov (United States)

    Loiola, Carina Mendes; Azevedo, Alinne Oliveira Nunes; Diniz, Leandro E C; Aragão, Wilson Menezes; Azevedo, Carlos Diego de O; Santos, Pedro Henrique A D; Ramos, Helaine Christine C; Pereira, Messias Gonzaga; Ramos, Semíramis R Ramalho

    2016-01-01

    The diversity and genetic relationships among two accessions of tall coconut palms collected in Brazil and seven accessions introduced from different geographic regions of the world were analyzed using 25 microsatellite primers, 19 of which were polymorphic and detected between 4 and 10 alleles per locus, with an average of 6.57. The observed and expected heterozygosity ranged from 0.25 and 0.40 in the Rennell Islands Tall (RIT) accession to 0.54 and 0.62 in the Polynesian Tall (PYT) accession. The analysis of genetic structure resulted in the formation of five distinct groups. The first group was formed by the accessions Brazilian Tall-Praia do Forte (BRTPF), Brazilian Tall-Merepe (BRTMe) and West African Tall (WAT); the second group consisted of Malaysian Tall (MLT); the third group of RIT; the fourth group of Vanuatu Tall (VTT); and the fifth group of Rotuman Tall (RTMT), Tonga Tall (TONT) and PYT. The dendrogram based on the nearest-neighbor method detected the formation of two main groups and five subgroups, indicating that the genetic relationships of the accessions are based on their geographic regions of origin. The analyses revealed genetic relationships between the accessions collected in Brazil and the accession from Africa, and among palms from South East Asia and the South Pacific, confirming the common origin of these accessions. The information obtained in this study can guide decisions on germplasm conservation activities and the efficient selection of genetically divergent parents for use in coconut breeding programs in Brazil, which are attempting to select for disease resistance, mainly to lethal yellowing, among other characteristics.

  1. Raw material versus processing

    International Nuclear Information System (INIS)

    Berg, E.A.T.

    1989-01-01

    Some brazilian aspects related with the obtainment of raw materials for advanced ceramic products are described. The necessity of import raw materials by the advanced ceramic industries is mentioned, generating dangerous depedence for the country. The brazilian mineral reserves for using in raw materials of advanced ceramic are also cited. (C.G.C.) [pt

  2. Inward Processing Regime Promotion System in Vegetable Oil Industry: A Case Study of Turkey

    Directory of Open Access Journals (Sweden)

    Sinan Duru

    2017-04-01

    Full Text Available This study was conducted to determine applicability of the Inward Processing Regime (IPR in enterprises which are vegetable oil producers and exporters. The data was obtained from 26 vegetable oil producer and exporter enterprises by using survey method. Frequency tables, indices, and percentage calculating were used to analyse Data. Also, SWOT analysis was used to determine the strengths, weaknesses, opportunities and threats in the sector, and relationship among some variables were examined with correlation coefficient. According to research findings, 25 of the enterprises (96% utilised the IPR. Since the enterprises started to use that system; availability of cheap raw material, rate of capacity utilisation, market share, and export value all have increased. In addition, raw material was found as an important expense item, and the most important problems were qualified as raw material inadequacy and high input prices.

  3. Skipjack tuna (Katsuwonus pelamis) eyeball oil exerts an anti-inflammatory effect by inhibiting NF-κB and MAPK activation in LPS-induced RAW 264.7 cells and croton oil-treated mice.

    Science.gov (United States)

    Jeong, Da-Hyun; Kim, Koth-Bong-Woo-Ri; Kim, Min-Ji; Kang, Bo-Kyeong; Ahn, Dong-Hyun

    2016-11-01

    The effect of tuna eyeball oil (TEO) on lipopolysaccharide (LPS)-induced inflammation in macrophage cells was investigated. TEO had no cytotoxicity in cell viability as compared to the control in LPS induced RAW 264.7 cells. TEO reduced the levels of NO and pro-inflammatory cytokines by up to 50% in a dose-dependent manner. The expression of NF-κB and MAPKs as well as iNOS and COX-2 proteins was reduced by TEO, which suggests that its anti-inflammatory activity is related to the suppression of the NF-κB and MAPK signaling pathways. The rate of formation of ear edema was reduced compared to that in the control at the highest dose tested. In an acute toxicity test, no mice were killed by TEO doses of up to 5000mg/kg body weight during the two week observation period. These results suggested that TEO may have a significant effect on inflammatory factors and be a potential anti-inflammatory therapeutic. Copyright © 2016 Elsevier B.V. All rights reserved.

  4. Oil and development

    Energy Technology Data Exchange (ETDEWEB)

    Ellis, F

    1974-10-01

    The shift in world income due to the increase in oil prices has resulted in a world economy that has been thrown off balance. Nine papers are presented that explore the background and the main implications of this ''watershed'' in international relations, particularly the extent to which it will affect the development prospects of poor countries and the climate of trade between poor and rich nations in the next few years. Two papers, ''Diary of Events in the Oil Market 1971--1974'' and ''Statistical Background,'' provide information on the financial changes implied by the price increase; some of the figures should be treated as preliminary estimates only. ''Large International Firms in the Oil Industry'' examines the part played by the major oil companies in developments in the oil market leading up to the events of 1973. Two papers, ''Can OPEC Maintain Current Prices'' and ''OPEC As a Model for Other Mineral Exporters,'' present optimistic conclusions, from the viewpoint of developing countries, on their future capability for controlling their own destinies in trade. ''A Note on Some Issues Raised for Science and Technology Policy by the Increase in Oil Prices'' looks at options open to producers and consumers of raw materials. ''Assessing the Economic Impact on Developing Countries and Some Policy Suggestions,'' ''A Note on the Implications of the Oil Price Increases for British Aid Policy,'' and ''Confrontation Versus Co-operation'' are three papers concerned with difficulties of developing countries and particularly India, Bangladesh, and Sri Lanka. (MCW)

  5. 33 CFR 165.T09-0073 - Safety and Security Zones; Tall Ships Challenge 2010; Great Lakes; Cleveland, OH; Bay City, MI...

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety and Security Zones; Tall... GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY REGULATED NAVIGATION AREAS... Guard District § 165.T09-0073 Safety and Security Zones; Tall Ships Challenge 2010; Great Lakes...

  6. Effects of source and level of dietary energy supplementation on in vitro digestibility and methane production from tall fescue-based diets

    Science.gov (United States)

    There is a lack of information about the effect of different sources, levels, and the mixtures of energy supplements commonly fed to cattle grazing tall fescue. Therefore, the objective of this study was to evaluate different common energy sources for beef cattle grazing tall fescue using an in vitr...

  7. Columbia University: Direct Reversal of Glucocorticoid Resistance by AKT inhibition in Acute Lymphoblastic Leukemia (T-ALL) | Office of Cancer Genomics

    Science.gov (United States)

    The goal of this project is to identify key druggable regulators of glucocorticoid resistance in T-ALL. To this end, a reverse-engineered T-ALL context-specific regulatory interaction network was created from a phenotypically diverse T-ALL gene expression dataset, and then this network was interrogated using master regulator analysis to find drivers of glucocorticoid resistance.

  8. Investigation of activated Al-pillared clay efficiency in vegetable oil purification

    Directory of Open Access Journals (Sweden)

    Lomić Gizela A.

    2004-01-01

    Full Text Available This paper represents a contribution to the applicability of natural clays and their derivates as adsorbents in the process of purification of vegetable oil. Investigation of textural properties of raw and purified clay samples reveals that during acid activation and Al-pillaring, BET and micropore surface area increases significantly. However, bleaching capacity of clay and its derivates is not determined by using sample surface area, but rather sample total pore volume. Surface area, especially micropore surface area contributes to removal of smaller molecules. This was confirmed by successful elimination of moisture and volatile materials by samples with an appropriate micropore structure. Used samples of clay and its derivates do not significantly influence acid and peroxide values of raw sunflower oil during its treatment.

  9. Effects of Tall Fescue Forage Mass on Steer Ingestive Behavior and Performance

    Science.gov (United States)

    Tall fescue [Lolium arundinaceum (Schreb.) Darbysh] is a well adapted perennial pasture species utilized across the north-south transition zone of the United States and in similar environments worldwide. This 3-yr trial evaluated the influence of three forage masses (FM) on steer and pasture respons...

  10. Mississippi mud pie: cleaning up a large land-based oil spill

    Energy Technology Data Exchange (ETDEWEB)

    Vitello, C.

    2001-07-01

    Clean-up of one of the largest land-based oil spills in the history of the United States near Collins, Mississippi, which occurred in December 1999, is described. The oil spill resulted from a corroded pipeline and had been leaking for several days before it was noticed. By the time the first responders arrived the oil had travelled more than five kilometres to the Leaf River, and 24 kilometers downstream. Oil Gator, a patented material that accelerates the biodegradation of hydrocarbons, was used to remediate most of the soil onsite. The product is of low toxicity; it is not harmful to humans, animals or plant life, nor is it WHMIS or OSHA regulated. It was applied with a Samsung Track hoe with a Rhom rake attachment, a mini bobcat hoe and rototillers. The absorbent was effective and very little vegetation had to be removed except for certain trees that were soaked to the root. The cleanup effort cost about $17 million, used 30 truckloads of sorbent product, ten truckloads less than was initially estimated. After some 18 months the Collins site is now covered by two-foot tall grass. Regular third party monitoring is continuing. photos.

  11. Mississippi mud pie: cleaning up a large land-based oil spill

    International Nuclear Information System (INIS)

    Vitello, C.

    2001-01-01

    Clean-up of one of the largest land-based oil spills in the history of the United States near Collins, Mississippi, which occurred in December 1999, is described. The oil spill resulted from a corroded pipeline and had been leaking for several days before it was noticed. By the time the first responders arrived the oil had travelled more than five kilometres to the Leaf River, and 24 kilometers downstream. Oil Gator, a patented material that accelerates the biodegradation of hydrocarbons, was used to remediate most of the soil onsite. The product is of low toxicity; it is not harmful to humans, animals or plant life, nor is it WHMIS or OSHA regulated. It was applied with a Samsung Track hoe with a Rhom rake attachment, a mini bobcat hoe and rototillers. The absorbent was effective and very little vegetation had to be removed except for certain trees that were soaked to the root. The cleanup effort cost about $17 million, used 30 truckloads of sorbent product, ten truckloads less than was initially estimated. After some 18 months the Collins site is now covered by two-foot tall grass. Regular third party monitoring is continuing. photos

  12. Acceptance and storage of fresh cheese made with essential oils

    Directory of Open Access Journals (Sweden)

    Joelmir Grassi Presente

    2017-08-01

    Full Text Available The aim of this work was to evaluate the acceptance and conservation of Minas fresh cheese with essential oils added of oregano and ginger in its formulation. The quality of the milk used as raw material was evaluated for pH, acidity, alizarol, total solids, density, and total microbial load. The cheeses produced were characterized as pH, acidity, moisture, lipids, proteins and ashes. The cheeses were also evaluated by sensorial affective tests using hedonic and attitude scales, in order to determine the acceptance and purchase intention by judges. The count of total aerobic mesophilic microorganisms was used to estimate the shelf-life of cheeses. The milk used as raw material is presented within the quality standards required by legislation. The cheeses made with essential oils showed pH and acidity around 6.9 and 0.87%, respectively, 57.6% moisture, 31.3% lipids, 11.4% protein and 0.9% ash. The cheese added essential oil of oregano and the control cheese were those given by the judges the best values for acceptance (7.5 and 7.6, respectively and purchase intention (4.2 and 4.4 respectively. Regarding the estimated shelf-life, the cheeses added essential oil of oregano and ginger had lower overall microbial load values compared to the control (no oil and mixed (two oils addition, presented counts values with up 106 UFC/g only from the 28th day of storage.

  13. Agronomic Evaluation and Genetic Variation of Tunisian Tall Fescue (Festuca arundinacea Schreb.

    Directory of Open Access Journals (Sweden)

    N. Chtourou-Ghorbel

    2011-01-01

    Full Text Available Nine important agronomic traits were used to assess the genetic diversity of Tunisian tall fescue and to investigate the extent of genotype X environment (GE interaction and its implications for breeding programs. These traits were studied for three consecutive years in thirty-five spontaneous populations and three cultivars. Panicle size contributed to seeds production, while the plant height at harvest and dry matter yield were selected for forage performance. Analysis of variance demonstrated that population attitude depended on the year and environmental conditions. Principal component analysis revealed significant similarities among some spontaneous populations and cultivars. The relationship between environmental conditions and agronomic traits revealed the influence of altitude, soil texture and minimum temperature on forage production, seed yield, and the architecture of plants, respectively. In addition, the local adapted ecotypes originating from Bizerte, Sidi Nsir, and Rass Rajel attained greater agronomic potentialities than control cultivars and were of considerable economic interest for the improvement of Tunisian tall fescue.

  14. Consumer perception of eatable oils quality in SR

    Directory of Open Access Journals (Sweden)

    Ľudmila Nagyová

    2010-01-01

    Full Text Available The aim of the paper is to highlight the perception of the quality of edible oils and preferences of the Slovak consumers for the oil purchase as well as the factors that can affect the purchase of oil, respectively the consumer decision-making. In order to obtain primary data was used the method of questionnaire investigation. In the questionnaire research there were 664 respondents from all over Slovakia involved. The results of marketing research showed the different approaches to assessing the quality by Slovak consumers. Nearly 54% of respondents connect the food quality with health certificate, high-quality ingredients and freshness. Brand quality SK is known by 58% of respondents. The raw material from which is oil produced, oil clarity, thermal stability and color are features that respondents prefer when purchasing the edible oils. To know the content of essential fatty acids was interesting only for 7.44% of the respondents. Slovak consumers prefer sunflower, olive and rapeseed oil.

  15. Some problems of oil shale retorting in Estonia

    International Nuclear Information System (INIS)

    Oepik, I.

    1994-01-01

    Oil shale in Estonia will be competitive in the long term as a primary resource for power generating. The price of energy of Estonian oil shale is at present approximately 4 times lower than of coal. The price of electricity is anticipated to grow up to EEK 1.0/kWh in year 2020. The electricity price EEK 0.2/kWh at present in Estonia does not include capital costs needed for refurbishing of Estonian oil-shale-consuming power stations between the years 2000-2010. While all the prices and calculations of the enterprise are presented with no inflation adjustment, the other operation costs of oil shale retorting are anticipated for the prognosed period to remain at the present level: power consumption kWh 280/t crude oils and other operation costs (excluding labour, raw material and power consumption) EEK 100/t of oil

  16. Decision Support Model for Selection Technologies in Processing of Palm Oil Industrial Liquid Waste

    Science.gov (United States)

    Ishak, Aulia; Ali, Amir Yazid bin

    2017-12-01

    The palm oil industry continues to grow from year to year. Processing of the palm oil industry into crude palm oil (CPO) and palm kernel oil (PKO). The ratio of the amount of oil produced by both products is 30% of the raw material. This means that 70% is palm oil waste. The amount of palm oil waste will increase in line with the development of the palm oil industry. The amount of waste generated by the palm oil industry if it is not handled properly and effectively will contribute significantly to environmental damage. Industrial activities ranging from raw materials to produce products will disrupt the lives of people around the factory. There are many alternative technologies available to process other industries, but problems that often occur are difficult to implement the most appropriate technology. The purpose of this research is to develop a database of waste processing technology, looking for qualitative and quantitative criteria to select technology and develop Decision Support System (DSS) that can help make decisions. The method used to achieve the objective of this research is to develop a questionnaire to identify waste processing technology and develop the questionnaire to find appropriate database technology. Methods of data analysis performed on the system by using Analytic Hierarchy Process (AHP) and to build the model by using the MySQL Software that can be used as a tool in the evaluation and selection of palm oil mill processing technology.

  17. Equipment for RAW handling, packaging, transport and storage from ZTS VVU KOSICE a.s

    International Nuclear Information System (INIS)

    Vargovcik, L.

    2004-01-01

    Since 1988, the company ZTS VVU KOSICE has devoted a great part of its activities to the development of equipment for RAW handling, packaging, transport and storage, mainly for application in the decommissioning of NPP A1 at Jaslovske Bohunice in Slovakia. This is a HWGCR NPP shut down following a breakdown in 1977. This incident was caused by disruption of the technological channel serving as a barrier between heavy water moderator and fuel assembly. Damage of this barrier enabled heavy water leakage into the primary circuit with partial fuel elements cladding damage and subsequent additional contamination of the primary circuit. During two consecutive years after the incident main effort was focused on activities related to personnel and environment protection, moderator draining, reactor defuelling, dry cleaning of the primary circuit, repair and maintenance of equipment. The next step was the preparation of the concept of NPP A-1 introduction into dry safe state. The order of importance of RAW liquidation was as follows: 1. Spent fuel - spent fuel assemblies from NPP A-1 were, after short cooling, stored temporarily in storage pipe containers filled at the beginning of NPP operation with ''chrompik'' (an aqueous solution of K 2 Cr 2 O 7 with concentration of 3-5%), later with ''dowtherm'' (mixture of bi-phenyl oxide and bi-phenyl). The containers were placed in a storage pond filled with water. 2. Liquid RAW - combustible (dowtherm, oils) and non-combustible (chrompik, Demi water, decontaminating solutions, sludge, sorbents, etc.) 3. Solid RAW - metallic and non-metallic For this purpose, it was necessary to build RAW processing lines, intermediate storage facilities and systems for manipulation and transport of RAW

  18. The T-ALL related gene BCL11B regulates the initial stages of human T-cell differentiation.

    Science.gov (United States)

    Ha, V L; Luong, A; Li, F; Casero, D; Malvar, J; Kim, Y M; Bhatia, R; Crooks, G M; Parekh, C

    2017-11-01

    The initial stages of T-cell differentiation are characterized by a progressive commitment to the T-cell lineage, a process that involves the loss of alternative (myelo-erythroid, NK, B) lineage potentials. Aberrant differentiation during these stages can result in T-cell acute lymphoblastic leukemia (T-ALL). However, the mechanisms regulating the initial stages of human T-cell differentiation are obscure. Through loss of function studies, we showed BCL11B, a transcription factor recurrently mutated T-ALL, is essential for T-lineage commitment, particularly the repression of NK and myeloid potentials, and the induction of T-lineage genes, during the initial stages of human T-cell differentiation. In gain of function studies, BCL11B inhibited growth of and induced a T-lineage transcriptional program in T-ALL cells. We found previously unknown differentiation stage-specific DNA binding of BCL11B at multiple T-lineage genes; target genes showed BCL11B-dependent expression, suggesting a transcriptional activator role for BCL11B at these genes. Transcriptional analyses revealed differences in the regulatory actions of BCL11B between human and murine thymopoiesis. Our studies show BCL11B is a key regulator of the initial stages of human T-cell differentiation and delineate the BCL11B transcriptional program, enabling the dissection of the underpinnings of normal T-cell differentiation and providing a resource for understanding dysregulations in T-ALL.

  19. Antioxidant Effect of Extracts from the Coffee Residue in Raw and Cooked Meat

    Directory of Open Access Journals (Sweden)

    Ji-Hee Kim

    2016-07-01

    Full Text Available The residue of ground coffee obtained after the brewing process (spent coffee still contains various functional components with high antioxidant capacity and health benefits, but no attempts have been made to use it as a resource to produce value-added food ingredients. This study evaluates the antioxidant activity of ethanol or hot water extracts from the residues of coffee after brewing. An extraction experiment was carried out using the conventional solid–liquid methods, including ethanol and water as the extraction media at different temperatures and liquid/solid ratios. The antioxidant activity of extracts was tested for total phenolic compound (TPC, 2,2-diphenyl-1-picrylhydrazyl (DPPH, and 2-thiobarbituric acid reactive substances (TBARS using oil emulsion and raw/cooked meat systems. The DPPH radical scavenging activity of the ethanol extracts with heating (HEE and without heating (CEE were higher than that of the hot water extracts (WE. The highest DPPH value of HEE and CEE at 1000 ppm was 91.22% and 90.21%, respectively. In oil emulsion and raw/cooked systems, both the water and ethanol extracts had similar antioxidant effects to the positive control (BHA, but HEE and CEE extracts showed stronger antioxidant activities than WE extract. These results indicated that the ethanol extracts of coffee residue have a strong antioxidant activity and have the potential to be used as a natural antioxidant in meat.

  20. Sosiaalisen median merkitys mikroyrityksille - Case: TallFits Oy

    OpenAIRE

    Nousiainen, Ari; Koskivuori, Timo

    2011-01-01

    Tämän opinnäytetyön aiheena on sosiaalinen media mikroyritysten näkökulmasta. Työssä käsi-tellään sosiaalista mediaa ja markkinoinnissa tapahtunutta muutosta sekä niitä toimintatapoja, joita interaktiivinen mediaympäristö yrityksille ja sen asiakkaille tarjoaa. Työn tavoitteena on tuottaa tietoa sosiaalisen median hyödyistä ja haasteista mikroyrityksille ja lisätä koh-deyrityksemme TallFits Oy:n myyntiä ja löydettävyyttä. Tavoitteiden saavuttamiseksi opinnäytetyömme tarkoituksena oli tehd...

  1. The Alleviation of Heat Damage to Photosystem II and Enzymatic Antioxidants by Exogenous Spermidine in Tall Fescue.

    Science.gov (United States)

    Zhang, Liang; Hu, Tao; Amombo, Erick; Wang, Guangyang; Xie, Yan; Fu, Jinmin

    2017-01-01

    Tall fescue ( Festuca arundinacea Schreb) is a typical cool-season grass that is widely used in turf and pasture. However, high temperature as an abiotic stress seriously affects its utilization. The objective of this study was to explore the effect of spermidine (Spd) on heat stress response of tall fescue. The samples were exposed to 22°C (normal condition) or 44°C (heat stress) for 4 h. The results showed that exogenous Spd partially improved the quality of tall fescue leaves under normal temperature conditions. Nevertheless, after heat stress treatment, exogenous Spd significantly decreased the electrolyte leakage of tall fescue leaves. Spd also profoundly reduced the H 2 O 2 and O 2 ⋅- content and increased antioxidant enzymes activities. In addition, PAs can also regulate antioxidant enzymes activities including SOD, POD, and APX which could help to scavenge ROS. Moreover, application of Spd could also remarkably increase the chlorophyll content and had a positive effect on the chlorophyll α fluorescence transients under high temperature. The Spd reagent enhanced the performance of photosystem II (PSII) as observed by the JIP-test. Under heat stress, the Spd profoundly improved the partial potentials at the steps of energy bifurcations (PI ABS and PI total ) and the quantum yields and efficiencies (φP 0 , δR 0 , φR 0 , and γRC). Exogenous Spd could also reduce the specific energy fluxes per Q A - reducing PSII reaction center (RC) (TP 0 /RC and ET 0 /RC). Additionally, exogenous Spd improved the expression level of psbA and psbB , which encoded the proteins of PSII core reaction center complex. We infer that PAs can stabilize the structure of nucleic acids and protect RNA from the degradation of ribonuclease. In brief, our study indicates that exogenous Spd enhances the heat tolerance of tall fescue by maintaining cell membrane stability, increasing antioxidant enzymes activities, improving PSII, and relevant gene expression.

  2. The Alleviation of Heat Damage to Photosystem II and Enzymatic Antioxidants by Exogenous Spermidine in Tall Fescue

    Directory of Open Access Journals (Sweden)

    Liang Zhang

    2017-10-01

    Full Text Available Tall fescue (Festuca arundinacea Schreb is a typical cool-season grass that is widely used in turf and pasture. However, high temperature as an abiotic stress seriously affects its utilization. The objective of this study was to explore the effect of spermidine (Spd on heat stress response of tall fescue. The samples were exposed to 22°C (normal condition or 44°C (heat stress for 4 h. The results showed that exogenous Spd partially improved the quality of tall fescue leaves under normal temperature conditions. Nevertheless, after heat stress treatment, exogenous Spd significantly decreased the electrolyte leakage of tall fescue leaves. Spd also profoundly reduced the H2O2 and O2⋅- content and increased antioxidant enzymes activities. In addition, PAs can also regulate antioxidant enzymes activities including SOD, POD, and APX which could help to scavenge ROS. Moreover, application of Spd could also remarkably increase the chlorophyll content and had a positive effect on the chlorophyll α fluorescence transients under high temperature. The Spd reagent enhanced the performance of photosystem II (PSII as observed by the JIP-test. Under heat stress, the Spd profoundly improved the partial potentials at the steps of energy bifurcations (PIABS and PItotal and the quantum yields and efficiencies (φP0, δR0, φR0, and γRC. Exogenous Spd could also reduce the specific energy fluxes per QA- reducing PSII reaction center (RC (TP0/RC and ET0/RC. Additionally, exogenous Spd improved the expression level of psbA and psbB, which encoded the proteins of PSII core reaction center complex. We infer that PAs can stabilize the structure of nucleic acids and protect RNA from the degradation of ribonuclease. In brief, our study indicates that exogenous Spd enhances the heat tolerance of tall fescue by maintaining cell membrane stability, increasing antioxidant enzymes activities, improving PSII, and relevant gene expression.

  3. Biodiesel production from corn oil by transesterification process

    International Nuclear Information System (INIS)

    Khan, N.A.; Dessouky, H.

    2009-01-01

    There is much political demand and economic pressure to convert agricultural surpluses into material, such as motor fuel, in which the world is deficient. Transport industry is primary consumer of crude oil. Due to scarcity of known petroleum reserves, the possible alternative fuel for use in present engine technology is biofuels. Europe, USA and Brazil are successfully using biofuels. Biofuels causes less environmental pollution as compared to normal petro fuels. As a fuel, ethanol (gasohol) is used in internal combustion engine while methyester (Biodiesel) is used in diesel engines with same or better performance as compared to petro fuels. Corn is very valuable crop with numerous industrial applications, and is used in more than 300 modern industries, including the manufacture of textiles, paper, adhesives, insecticides, paints, soaps, explosives and many more. Presently the biggest source of ethanol production is from corn (produced by USA). Edible oil can also be extracted from corn which is normally used for cooking and it can be used for biodiesel production. Many countries are experimenting on fats and oil to get feasible data for production of biodiesel. Presently USA prefer to use soybean oil as raw material for commercial production of biodiesel while in Europe rapeseed oil is preferred, so therefore, it depends upon the availability of raw material in particular area and may change from location to location. In Pakistan we started with corn oil to produce biodiesel by transesterification method. In present study different design parameters such as effect of temperature, catalyst concentration, molar ratio, and Stirrer speed were founded for better conversion of neat and used corn oil into biodiesel. The optimum parameters proposed for neat corn oil are 0.5% of catalyst based on weight of corn oil, temperature between 50 deg. C to 60 deg. C, reaction time 15 minutes, molar ratio of 6:1 and speed of stirrer 155 rpm. In case of used corn oil high catalyst

  4. Impact of a Large San Andreas Fault Earthquake on Tall Buildings in Southern California

    Science.gov (United States)

    Krishnan, S.; Ji, C.; Komatitsch, D.; Tromp, J.

    2004-12-01

    In 1857, an earthquake of magnitude 7.9 occurred on the San Andreas fault, starting at Parkfield and rupturing in a southeasterly direction for more than 300~km. Such a unilateral rupture produces significant directivity toward the San Fernando and Los Angeles basins. The strong shaking in the basins due to this earthquake would have had a significant long-period content (2--8~s). If such motions were to happen today, they could have a serious impact on tall buildings in Southern California. In order to study the effects of large San Andreas fault earthquakes on tall buildings in Southern California, we use the finite source of the magnitude 7.9 2001 Denali fault earthquake in Alaska and map it onto the San Andreas fault with the rupture originating at Parkfield and proceeding southward over a distance of 290~km. Using the SPECFEM3D spectral element seismic wave propagation code, we simulate a Denali-like earthquake on the San Andreas fault and compute ground motions at sites located on a grid with a 2.5--5.0~km spacing in the greater Southern California region. We subsequently analyze 3D structural models of an existing tall steel building designed in 1984 as well as one designed according to the current building code (Uniform Building Code, 1997) subjected to the computed ground motion. We use a sophisticated nonlinear building analysis program, FRAME3D, that has the ability to simulate damage in buildings due to three-component ground motion. We summarize the performance of these structural models on contour maps of carefully selected structural performance indices. This study could benefit the city in laying out emergency response strategies in the event of an earthquake on the San Andreas fault, in undertaking appropriate retrofit measures for tall buildings, and in formulating zoning regulations for new construction. In addition, the study would provide risk data associated with existing and new construction to insurance companies, real estate developers, and

  5. Modelling of seed yield and its components in tall fescue (Festuca ...

    African Journals Online (AJOL)

    AJL

    2011-10-03

    Oct 3, 2011 ... number spikelet -1 (Y4), seed weight (Y5), and the seed yield (Z) of tall fescue were determined in field experiments from 2003 to .... the time of fertilisation (X1), the quantity of irrigation (X2), the amount of N applied (X3), the ...... certain agronomical traits in soybean [Glycine max (L.) Merr.]. Afr. J. Biotechnol.

  6. QUALITY MANAGEMENT OF FOOD SYSTEMS WITH THE PREDICTED BIOPOTENTIAL ON THE BASIS OF PRODUCTS OF PROCESSING OF DOMESTIC LOW-OLIVE RAW MATERIALS

    Directory of Open Access Journals (Sweden)

    T. V. Alekseeva

    2015-01-01

    Full Text Available Summary. This receiving the vegetable complex food system (VCFS on the basis of the cake of germs of wheat (CGW is presented. The review of composition of vegetable oils from low-olive raw materials is given, prospects of its application for creation of food systems of the balanced structure on PNZС are analyzed. It is established that the ratio of -6 и -3 of fatty acids in oil of germs of wheat doesn't correspond to recommendations of scientific research institute of food of the Russian Academy of Medical Science. For the purpose of establishment of necessary balance of -6 и -3 in food system, the blend with oils of an amaranth and pumpkin is carried out. The review of composition of vegetable oils from low-olive raw materials is given. The optimum ratio the entered oil of an amaranth and pumpkin according to recommendations of scientific research institute of food of the Russian Academy of Medical Science, by means of the developed software products written on in the Python 2.6 language and in the imperative, structured, object-oriented programming language – Delphi 7.0 is picked up. On the basis of the obtained data, the mass fraction of the components entering a compounding of vegetable food system is defined. The technological process of production of a product including the following stages is described: reception and preparation of raw materials and materials, dispensing and mixing of components, crushing and packing. Physical and chemical indicators of the received product, a chemical composition of RKPS and an organoleptic assessment of an innovative product are given. Calculation of satisfaction of daily need of an organism for feedstuffs and energy of vegetable food system is made. The composition of protein of an innovative product is analyzed: the amino-acid structure of food system, biological value, and also following indicators is counted: utility coefficient, coefficient of comparable redundancy, coefficient of

  7. PENINGKATAN KUALITAS DAN PROSES PEMBUATAN BIODIESEL DARI BLENDING MINYAK KELAPA SAWIT (PALM OIL DAN MINYAK KELAPA (COCONUT OIL DAN BANTUAN GELOMBANG ULTRASONIK

    Directory of Open Access Journals (Sweden)

    Hantoro Satriadi

    2015-01-01

    Full Text Available Keterbatasan solar sebagai sumber energi bahan bakunya tidak dapat diperbaharui menuntut adanya bahan baku alternatif yang dapat diperbaharui dan ramah lingkungan untuk pembuatan biodiesel. Reaksi utama produksi biodiesel adalah esterifikasi dan transestirifikasi yang berlangsung lambat dan membutuhkan banyak katalis dan alkohol. Reaksi yang terjadi belum sempurna dan belum memenuhi standar SNI dan ASTM. Untuk memperbaiki mutu biodiesel serta menghasilkan yield maksimal, maka dilakukan blending bahan baku antara minyak kelapa sawit dan minyak kelapa dan dengan bantuan gelombang ultrasonic. Penelitian ini bertujuan untuk mempelajari pengaruh variabel perbandingan volume minyak kelapa sawit dan minyak kelapa, perbandingan volume methanolminyak, dan persentase berat katalis terhadap minyak terhadap hasil atau yield biodiesel. Alat utama yang digunakan adalah reaktor yang dilengkapi pembangkit gelombang ultrasonic dengan temperature 60 oC, tekanan 1 atm, volume 3 liter, dan frekuensi 28 kHz. Variabel proses pada penelitian ini adalah perbandingan volume minyak sawit dan kelapa 2:1, 3:1, dan 4:1, pebandingan volume metanol-minyak 0,2:1, 0,25:1, dan 0,3:1, dan persentase berat katalis KOH terhadap minyak 0,3%, 0,5%, dan 0,7%. Hasil penelitian didapat konversi tertinggi dicapai pada variabel perbandingan volume minyak sawit dan kelapa 3:1, perbandingan volume metanol/minyak 0,25:1, dan persentase berat katalis terhadap minyak dengan yield 97,26%.[A Improvement of Quality and Process for Biodiesel Production from Palm Oil and Coconut Oil Blends with Ultrasound Assisted] Limitations of solar energy as a source of raw material cannot be renewed demands for alternative raw materials that are renewable and environmentally friendly for the manufacture of biodiesel. The main production of biodiesel reaction is esterification and transestirifikasi which runs slow and requires a lot of alcohol and a catalyst. Reactions that happen yet perfect, and has not met

  8. Physicochemical characterisation and radical-scavenging activity of Cucurbitaceae seed oils.

    Science.gov (United States)

    Jorge, Neuza; da Silva, Ana Carolina; Malacrida, Cassia Roberta

    2015-01-01

    Oils extracted from Cucurbitaceae seeds were characterised for their fatty acid and tocopherol compositions. In addition, some physicochemical characteristics, total phenolic contents and the radical-scavenging activities were determined. Oil content amounted to 23.9% and 27.1% in melon and watermelon seeds, respectively. Physicochemical characteristics were similar to those of other edible oils and the oils showed significant antioxidant activities. Fatty acid composition showed total unsaturated fatty acid content of 85.2-83.5%, with linoleic acid being the dominant fatty acid (62.4-72.5%), followed by oleic acid (10.8-22.7%) and palmitic acid (9.2-9.8%). The oils, especially watermelon seed oil, showed high total tocopherol and phenolic contents. The γ-tocopherol was the predominant tocopherol in both oils representing 90.9 and 95.6% of the total tocopherols in melon and watermelon seed oils, respectively. The potential utilisation of melon and watermelon seed oils as a raw material for food, chemical and pharmaceutical industries appears to be favourable.

  9. Nutritional value of raw soybeans, extruded soybeans, roasted soybeans and tallow as fat sources in early lactating dairy cows.

    Science.gov (United States)

    Amanlou, H; Maheri-Sis, N; Bassiri, S; Mirza-Aghazadeh, A; Salamatdust, R; Moosavi, A; Karimi, V

    2012-01-01

    Thirty multiparous Holstein cows (29.8 ± 4.01days in milk; 671.6 ± 31.47 kg of body weight) were used in a completely randomized design to compare nutritional value of four fat sources including tallow, raw soybeans, extruded soybeans and roasted soybeans for 8 weeks. Experimental diets were a control containing 27.4 % alfalfa silage, 22.5% corn silage, and 50.1% concentrate, and four diets with either tallow, raw soybean, extruded soybean, or roasted soybean added to provide 1.93% supplemental fat. Dry matter and NEL intakes were similar among treatments, while cows fed fat diets had significantly (Pfat. Supplemental fat, whether tallow or full fat soybeans increased milk production (1.89-2.45 kg/d; PMilk fat yield and percentage of cows fed fat-supplemented diets were significantly (Pfat-supplemented diets, roasted soybean caused highest milk fat yield and extruded soybean caused lowest milk fat yield. There was no significant effect of supplemental fat on the milk protein and lactose content and yield. Feed efficiency of fat-supplemented diets was significantly (Pfat sources on production response of cows, fat originating from heat-treated soybean help to minimize imported RUP (rumen undegradable protein) sources level as fish meal in comparison with tallow and raw soybean oil. In the Current study, there was no statistical significance among nutritional values of oil from extruded soybeans and roasted soybeans.

  10. The dual specificity PI3K/mTOR inhibitor PKI-587 displays efficacy against T-cell acute lymphoblastic leukemia (T-ALL).

    Science.gov (United States)

    Gazi, Mohiuddin; Moharram, Sausan A; Marhäll, Alissa; Kazi, Julhash U

    2017-04-28

    Although significant improvements have been made in the treatment of acute lymphoblastic leukemia (ALL), there is a substantial subset of high-risk T-cell ALL (T-ALL) patients with relatively poor prognosis. Like in other leukemia types, alterations of the PI3K/mTOR pathway are predominant in ALL which is also responsible for treatment failure and relapse. In this study, we show that relapsed T-ALL patients display an enrichment of the PI3K/mTOR pathway. Using a panel of inhibitors targeting multiple components of the PI3K/mTOR pathway, we observed that the dual-specific PI3K/mTOR inhibitor PKI-587 was the most selective inhibitor for T-ALL cells dependent on the PI3K/mTOR pathway. Furthermore, we observed that PKI-587 blocked proliferation and colony formation of T-ALL cell lines. Additionally, PKI-587 selectively abrogated PI3K/mTOR signaling without affecting MAPK signaling both in in vitro and in vivo. Inhibition of the PI3K/mTOR pathway using PKI-587 delayed tumor progression, reduced tumor load and enhanced the survival rate in immune-deficient mouse xenograft models without inducing weight loss in the inhibitor treated mice. This preclinical study shows beneficial effects of PKI-587 on T-ALL that warrants further investigation in the clinical setting. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Synergistic Cytotoxic Effect of L-Asparaginase Combined with Decitabine as a Demethylating Agent in Pediatric T-ALL, with Specific Epigenetic Signature

    Directory of Open Access Journals (Sweden)

    Salvatore Serravalle

    2016-01-01

    Full Text Available T-Acute Lymphoblastic Leukemia (T-ALL remains a subgroup of pediatric ALL, with a lower response to standard chemotherapy. Some recent studies established the fundamental role of epigenetic aberrations such as DNA hypermethylation, to influence patients’ outcome and response to chemotherapy. Moreover, L-asparaginase is an important chemotherapeutic agent for treatment of ALL and resistance to this drug has been linked to ASNS expression, which can be silenced through methylation. Therefore, we tested whether the sensitivity of T-ALL cell lines towards L-asparaginase is correlated to the epigenetic status of ASNS gene and whether the sensitivity can be modified by concurrent demethylating treatment. Hence we treated different T-ALL cell lines with L-asparaginase and correlated different responses to the treatment with ASNS expression. Then we demonstrated that the ASNS expression was dependent on the methylation status of the promoter. Finally we showed that, despite the demethylating effect on the ASNS gene expression, the combined treatment with the demethylating agent Decitabine could synergistically improve the L-asparaginase sensitivity in those T-ALL cell lines characterized by hypermethylation of the ASNS gene. In conclusion, this preclinical study identified an unexpected synergistic activity of L-asparaginase and Decitabine in the subgroup of T-ALL with low ASNS expression due to hypermethylation of the ASNS promoter, while it did not restore sensitivity in the resistant cell lines characterized by higher ASNS expression.

  12. Inhibitory Effects of Several Essential Oils towards Salmonella typhimurium, Salmonella paratyphi A and Salmonella paratyphi B

    Directory of Open Access Journals (Sweden)

    S.F. Mazhar

    2014-09-01

    Full Text Available Plant essential oils are natural products extracted from plants and because of their antimicrobial properties can be used as natural additives in foods. They are also useful for decontamination of food-borne pathogens and can be a safe additive in foods. The antimicrobial activities of essential oils belonging to Saturiea hortensis, Thymus vulgaris, Mentha polegium, Cuminum cyminum, Lavandula officinalis and Mentha viridis L. (spearmint were investigated at different concentrations (0.1, 0.3, 0.5, 1, 2, 5 and 10%v/v against Salmonella typhimurium, Salmonella paratyphi A and Salmonella paratyphi B by using the agar well diffusion method. Essential oils showed inhibitory effect on Salmonella spp. in the agar well diffusion assay. In addition, the capability of essential oils for decontamination of minced row beef, ground beef, minced raw chicken and minced raw fish inoculated with Salmonella spp. at 0.1 and 0.5%v/v were assessed. Reduction of the Salmonella spp. population was observed following the inoculation of the cultures with 0.1 and 0.5%v/v essential oils.

  13. Plan and justification for a Proof-of-Concept oil shale facility

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-01

    The technology being evaluated is the Modified In-Situ (MIS) retorting process for raw shale oil production, combined with a Circulating Fluidized Bed Combustor (CFBC), for the recovery of energy from the mined shale. (VC)

  14. TALL HERB SPRUCE FORESTS AS CLIMAX COMMUNITIES ON LOWLAND SWAMPS OF BRYANSK POLESIE

    Directory of Open Access Journals (Sweden)

    O. I. Evstigneev

    2017-09-01

    Full Text Available Nettle grey alder forests are a dominant forest type on lowland swamps in the Bryansk Polesie. They are formed as a result of repeated cuttings in the place of tall herb spruce forests. Tall herb spruce forests are very rare communities in the vegetation cover in this area due to clear cutting, melioration and peat extraction. An assessment of the succession status of tall herb spruce forests and nettle grey alder forests was carried out in this paper. The criteria of climax state and succession state of communities, developed for Eastern European forests, were used. These criteria are based on the degree of intensity of the following signs in the community: 1 the completeness of species composition of tree synusia; 2 the ontogenetic structure of tree species cenopopulation; 3 the gap-mosaic stand structure; 4 the diversity of microsites in soil cover; 5 the completeness of species composition and ecological-coenotic diversity of vascular species. We showed that tall herb spruce forest, as opposed to black alder forest, is close to communities of the climax type. This is evidenced by the following features of cenosis: firstly, all tree species in the area that covers the Bryansk Polesie and that are able to grow on lowland swamps are represented in the spruce forest (Alnus glutinosa, Betula pubescens, Fraxinus excelsior, Padus avium, Picea abies, Salix pentandra, Sorbus aucuparia, Ulmus glabra. Secondly, a steady turnover of generations is carried out in the cenopopulations of main edificators (Picea abies and Alnus glutinosa. This is evidenced by the complete and left-sided structure of their ontogenetic spectrum. Thirdly, a system of asynchronously developing gaps (parcels, which are formed on the site of old tree falls, is formed in the community. This ensures the continuous renewal of spruce and alder populations and creates conditions for the regeneration of other tree species. Fourthly, the structure of biogenic microsites has been formed

  15. Impact of residual glycerides on viscosity of biodiesel (waste and rapeseed oil blends)

    OpenAIRE

    Z. Jurac; L. Pomenić

    2013-01-01

    Purpose: Biodiesel, mixture of fatty acid methyl esters is a biodegradable alternative fuel that is obtained from renewable sources as a vegetable oils or animal fats. Use of waste cooking oils reduce the cost of raw materials for biodiesel production and also reduces the environment pollution. Moreover, pure edible vegetable oils for biodiesel production have an ethical significance because food is used to produce fuel. The aim of this work is a presentation of effects that r...

  16. Fuel vegetable oils under some economic considerations; Oleos vegetais combustiveis sob algumas consideracoes economicas

    Energy Technology Data Exchange (ETDEWEB)

    Mourad, Anna Lucia [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica. Dept. de Energia]|[Instituto de Tecnologia de Alimentos (ITAL), Campinas, SP (Brazil)). Centro de Tecnologia de Embalagem]. E-mail: anna@ital.sp.gov.br

    2006-07-01

    The introduction of bio diesel in the Brazilian energy matrix has been mainly motivated by the governmental actions, which foresees social and economical development to the country in a program that allows the use of different oil seed crops as raw materials for bio fuel production. Cost estimates considering the average price received by the farmer and the oil content of each vegetable shows that the minimum cost of bio fuel was about 1.1(castor bean); 1.8(peanut); 2.0(soy beans); 3.3(corn) higher than the average cost of fossil diesel from 1975 to 2004. Among the evaluated raw materials, only the palm oil had inferior cost compared to the petroleum diesel (0.6%). The oleaginous plants that have a higher oil content and smaller agricultural production cost to produce bio fuels are economically most feasible and they should be prioritized in the Government Program so that it may become economically sustainable along the years, as well as generate adequate profit to the farmers of each culture. (author)

  17. Evaluating the effect of temperature on biodiesel production from castor oil

    Directory of Open Access Journals (Sweden)

    Carlos Alberto Guerrero Fajardo

    2010-05-01

    Full Text Available Problems arising between biofuels and food as raw materials have led to investigating the use of inedible raw materials for their production. This work was aimed at studying the effect of temperature on converting castor oil in biodiesel production. Oil transesterification with methanol was carried out using an alkaline catalyst (0.5% NaOH - water solution for 1 hour using a 6:1 alcohol/oil molar ratio, at atmospheric pressure and taking temperature as a free variable. The temperature was evaluated at 68°F, 86°F, 104°F and 122ºF. The reaction products were analyzed by gas chromatography (CG-FID for quantifying the fatty acid methyl esters (FAME present. The results showed different dispersion depending on temperature, finding that 122°F resulted in less dispersion than the others. CG-FID analysis showed that most FAME content was reached at 122ºF, such temperature giving the highest ricinoleic acid conversion rate. Gas chromatography also revealed that reaction time was adequate, in process conditions, for obtaining ricinoleic acid-based 94.26% con- version.

  18. Health monitoring system for a tall building with Fiber Bragg grating sensors

    Science.gov (United States)

    Li, D. S.; Li, H. N.; Ren, L.; Guo, D. S.; Song, G. B.

    2009-03-01

    Fiber Bragg grating (FBG) sensors demonstrate great potentials for structural health monitoring of civil structures to ensure their structural integrity, durability and reliability. The advantages of applying fiber optic sensors to a tall building include their immunity of electromagnetic interference and multiplexing ability to transfer optical signals over a long distance. In the work, FBG sensors, including strain and temperature sensors, are applied to the construction monitoring of an 18-floor tall building starting from its construction date. The main purposes of the project are: 1) monitoring the temperature evolution history within the concrete during the pouring process; 2) measuring the variations of the main column strains on the underground floor while upper 18 floors were subsequently added on; and 3) monitoring the relative displacements between two foundation blocks. The FBG sensors have been installed and interrogated continuously for more than five months. Monitoring results of temperature and strains during the period are presented in the paper. Furthermore, the lag behavior between the concrete temperature and its surrounding air temperature is investigated.

  19. Fuel properties of biodiesel from vegetable oils and oil mixtures. Influence of methyl esters distribution

    International Nuclear Information System (INIS)

    Martínez, G.; Sánchez, N.; Encinar, J.M.; González, J.F.

    2014-01-01

    In this work, the quality of biodiesel produced by basic transesterification from several vegetable oils (soybean, rapeseed, sunflower, high oleic sunflower, Cynara Cardunculus L., Brassica Carinata and Jatropha Curca) cultivated in Extremadura has been studied in detail. The influence of raw material composition on properties such as density, viscosity, cetane number, higher heating value, iodine and saponification values and cold filter plugging point has been verified. Other biodiesel properties such as acid value, water content and flash and combustion points were more dependent on characteristics of production process. Biodiesel produced by rapeseed, sunflower and high oleic sunflower oils transesterification have been biofuels with better properties according to Norm EN 14214. Finally, it has been tested that it is possible to use oils mixtures in biodiesel production in order to improve the biodiesel quality. In addition, with the same process conditions and knowing properties of biodiesel from pure oils; for biodiesel from oils mixtures, its methyl esters content, and therefore properties dependent this content can be predicted from a simple mathematical equation proposed in this work. - Highlights: • Biodiesel quality produced by basic transesterification from vegetable oils. • We examine influences of methyl esters distribution on biodiesel properties. • Biofuels from soybean, sunflower and rapeseed oils were with better properties. • Oils mixtures improve biodiesel quality to fulfill Norm EN 14214. • An equation to predict properties of biodiesel from oil mixtures is proposed

  20. Performance of a diesel engine operating on raw coal-diesel fuel and solvent refined coal-diesel fuel slurries. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Marshall, H.P.

    1980-03-01

    Performance tests using an 11 kW single cylinder diesel engine were made to determine the effects of three different micronized coal-fuel oil slurries being considered as alternative fuels. Slurries containing 20, 32, and 40%-wt micronized raw coal in No. 2 fuel oil were used. Results are presented indicating the changes in the concentrations of SO/sub X/ and NO/sub X/ in the exhaust, exhaust opacity, power and efficiency, and in wear rates relative to operation on fuel oil No. 2. The engine was operated for 10 h at full load and 1400 rpm on al fuels except the 40%-wt slurry. This test was discontinued because of extremely poor performance.

  1. Fertility of Tall Girls Treated with High-Dose Estrogen, a Dose-Response Relationship

    NARCIS (Netherlands)

    Hendriks, A. E. J.; Drop, S. L. S.; Laven, J. S. E.; Boot, A. M.

    Context: High-dose estrogen treatment to reduce final height of tall girls increases their risk for infertility in later life. Objective: The aim was to study the effect of estrogen dose on fertility outcome of these women. Design/Setting: We conducted a retrospective cohort study of university

  2. Beneficiation-hydroretort processing of US oil shales: Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    None

    1989-01-01

    This report has been divided into three volumes. Volume I describes the MRI beneficiation work. In addition, Volume I presents the results of joint beneficiation-hydroretorting studies and provides an economic analysis of the combined beneficiation-hydroretorting approach for processing Eastern oil shales. Volume II presents detailed results of hydroretorting tests made by HYCRUDE/IGT on raw and beneficiated oil shales prepared by MRI. Volume III comprises detailed engineering design drawings and supporting data developed by the Roberts and Schaefer Company, Engineers and Contractors, Salt Lake City, Utah, in support of the capital and operating costs for a conceptual beneficiation plant processing an Alabama oil shale.

  3. Tall Tales: The Simpsons deconstructing the american myth

    Directory of Open Access Journals (Sweden)

    Hanna Betina Götz

    2014-07-01

    Full Text Available This article aims to analyze the episode Tall Tales from the series The Simpsons that revisits legends of the American folklore. The TV series pays homage to both the time of the pioneers in their travels to the Far West in the nineteenth century, as well as to one of the most iconic and folk characters of the American culture from that period: the Hobo was a beggar, a figure of the American folklore during the Great Depression. It is also interesting to focus on the American imaginary in order to understand how the authors of The Simpsons perform these recreations in contemporary times

  4. Effect of temperature on energy potential of pyrolysis products from oil palm shells

    Directory of Open Access Journals (Sweden)

    Lina María Romero Millán

    2016-06-01

    Full Text Available Context: Taking into account that near 220 000 tons of oil palm shells are produced every year in Colombia, as a waste of the Elaeis Guineensis palm oil transformation process, the aim of this work is to determine the energy potential of oil palm shells, when transformed through slow pyrolysis process. Methods: Using a fixed bed lab scale reactor, different oil palm shells pyrolysis tests were performed between 300°C and 500°C. The effect of the temperature in the process product yield and in the energy content of produced solids and gases were analyzed. Results: With a maximum mass yield of 50%, the char is considered the main product of oil palm shells pyrolysis, containing up to 73% of the raw biomass energy. The heating value of char raised with the temperature, from 29,6 MJ/kg at 300°C to 31,34 MJ/kg at 500°C. Moreover, the gas produced in the established temperature range had up to 13% of the energy content of the raw biomass, with a heating value near 12,5 MJ/m3. Conclusions: According to the results, slow pyrolysis can be considered an interesting process for the valorization of residual biomass as oil palm shells, through the production of solids and gases that can be used as fuels, or as precursor of other value-added products.

  5. Alkaloids May Not be Responsible for Endophyte Associated Reductions in Tall Fescue Decomposition Rates

    Science.gov (United States)

    1. Fungal endophyte - grass symbioses can have dramatic ecological effects, altering individual plant physiology, plant and animal community structure and function, and ecosystem processes such as litter decomposition and nutrient cycling. 2. Within the tall fescue (Schedonorus arundinaceus) - funga...

  6. Coretta Scott King Award Winner Javaka Steptoe Stands Tall "In Daddy's Arms."

    Science.gov (United States)

    Peck, Jackie; Hendershot, Judy

    1999-01-01

    Offers an interview with artist and author Javaka Steptoe, winner of the Coretta Scott King award for his book "In Daddy's Arms I Am Tall: African Americans Celebrating Fathers." Discusses his background in the arts, the variety of media he uses, how he begins thinking about his illustrations, his work with children's art, and aspects of his work.…

  7. Mapping of quantitative trait loci for oil content in cottonseed kernel

    Indian Academy of Sciences (India)

    (next to fiber) which serves as raw material for oil extraction or animal feed production ... systems that control the performance of these traits could facilitate the application of this information for cottonseed improvement that will help ensure ...

  8. Improved forage digestibility of tall fescue (Festuca arundinacea) by transgenic down-regulation of cinnamyl alcohol dehydrogenase.

    Science.gov (United States)

    Chen, Lei; Auh, Chung-Kyoon; Dowling, Paul; Bell, Jeremey; Chen, Fang; Hopkins, Andrew; Dixon, Richard A; Wang, Zeng-Yu

    2003-11-01

    Lignification of cell walls during plant development has been identified as the major factor limiting forage digestibility and concomitantly animal productivity. cDNA sequences encoding a key lignin biosynthetic enzyme, cinnamyl alcohol dehydrogenase (CAD), were cloned from the widely grown monocotyledonous forage species tall fescue (Festuca arundinacea Schreb.). Recombinant tall fescue CAD expressed in E. coli exhibited the highest V(max)/K(m) values when coniferaldehyde and sinapaldehyde were used as substrates. Transgenic tall fescue plants carrying either sense or antisense CAD gene constructs were obtained by microprojectile bombardment of single genotype-derived embryogenic suspension cells. Severely reduced levels of mRNA transcripts and significantly reduced CAD enzymatic activities were found in two transgenic plants carrying sense and antisense CAD transgenes, respectively. These CAD down-regulated transgenic lines had significantly decreased lignin content and altered ratios of syringyl (S) to guaiacyl (G), G to p-hydroxyphenyl (H) and S to H units. No significant changes in cellulose, hemicellulose, neutral sugar composition, p-coumaric acid and ferulic acid levels were observed in the transgenic plants. Increases of in vitro dry matter digestibility of 7.2-9.5% were achieved in the CAD down-regulated lines, thus providing a novel germplasm to be used for the development of grass cultivars with improved forage quality.

  9. Potential production of palm oil-based foaming agent as fire extinguisher of peatlands in Indonesia: Literature review

    Science.gov (United States)

    Subekti, P.; Hambali, E.; Suryani, A.; Suryadarma, P.

    2017-05-01

    This study aims to analyze the potential aplication of of palm oil-based foaming agent as peat fires fighter in Indonesia. From literature review, it has been known that the foaming agent able to form foam to extinguish fire, wrap and refrigerate the burning peat. It is necessary to develop the production and application of foaming agent in Indonesia because peat fires occur almost every year that caused smoke haze. Potential raw material for the production of environmental friendly foaming agent as foam extinguishing for peat fires in Indonesia aong other is palm oil due to abundant availability, sustainable, and foam product easily degraded in the environment of the burnt areas. Production of foaming agent as fire-fighting in Indonesia is one alternative to reduce the time to control the fire and smog disaster impact. Application of palm oil as a raw material for fire-fighting is contribute to increase the value added and the development of palm oil downstream industry.

  10. Temporal patterns of foliar ozone symptoms on tall milkweed (Asclepias exaltata L.) in Great Smoky Mountains National Park

    International Nuclear Information System (INIS)

    Chappelka, A.H.; Somers, G.L.; Renfro, J.R.

    2007-01-01

    Incidence and severity of ozone-induced foliar symptoms on tall milkweed (Asclepias exaltata L.) along selected trails in Great Smoky Mountains National Park (GRSM) were determined by two surveys/season conducted from 1992 through 1996. Overall incidence was 73%, and was 84%, 44%, 90%, 58%, and 82% for 1992-1996, respectively for the same clusters. Average incidence was 61% and 84% for the 1st and 2nd surveys, respectively. Seasonal comparisons showed two distinct injury groupings regarding incidence and severity of injury: 1992, 1994 and 1996 (high injury); 1993 and 1995 (low injury). No discernible patterns were observed between symptomatic and asymptomatic plants regarding height, herbivory or flowering. Regression analyses indicated no differentiation in foliar symptoms regarding topographic position, aspect, slope or elevation over the 5-year study period. Our findings indicate other micro-site or genetic factors may control ozone sensitivity of tall milkweed in GRSM. - Ground-level ozone has the potential to cause deleterious effects to tall milkweed growing in Great Smoky Mountains National Park

  11. Temporal patterns of foliar ozone symptoms on tall milkweed (Asclepias exaltata L.) in Great Smoky Mountains National Park

    Energy Technology Data Exchange (ETDEWEB)

    Chappelka, A.H. [School of Forestry and Wildlife Sciences, Auburn University, Auburn, AL 36849 (United States)], E-mail: chappah@auburn.edu; Somers, G.L. [School of Forestry and Wildlife Sciences, Auburn University, Auburn, AL 36849 (United States); Renfro, J.R. [USDI National Park Service, Resource Management and Science Division, Great Smoky Mountains National Park, Gatlinburg, TN 37738 (United States)

    2007-10-15

    Incidence and severity of ozone-induced foliar symptoms on tall milkweed (Asclepias exaltata L.) along selected trails in Great Smoky Mountains National Park (GRSM) were determined by two surveys/season conducted from 1992 through 1996. Overall incidence was 73%, and was 84%, 44%, 90%, 58%, and 82% for 1992-1996, respectively for the same clusters. Average incidence was 61% and 84% for the 1st and 2nd surveys, respectively. Seasonal comparisons showed two distinct injury groupings regarding incidence and severity of injury: 1992, 1994 and 1996 (high injury); 1993 and 1995 (low injury). No discernible patterns were observed between symptomatic and asymptomatic plants regarding height, herbivory or flowering. Regression analyses indicated no differentiation in foliar symptoms regarding topographic position, aspect, slope or elevation over the 5-year study period. Our findings indicate other micro-site or genetic factors may control ozone sensitivity of tall milkweed in GRSM. - Ground-level ozone has the potential to cause deleterious effects to tall milkweed growing in Great Smoky Mountains National Park.

  12. 103 Oil Politics and Niger Delta Ethnic Nationalism Film Genre in ...

    African Journals Online (AJOL)

    USER

    2017-12-30

    Dec 30, 2017 ... And all these have been used as raw materials for film production by Nigeria's .... manifold, and the state oil company Escravos-Lagos gas pipeline in. Chanom ...... film industry: A study of selected emergent genres. Ph.D.

  13. Laser-induced breakdown spectroscopy used to detect endophyte-mediated accumulation of metals by tall fescue

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Madhavi Z.; Stewart, Arthur J.; Gwinn, Kimberley D.; Waller, John C.

    2010-05-01

    Laser-induced breakdown spectroscopy (LIBS) was used to determine the impact of endophyte (Neotyphodium sp.) infection on elemental composition of tall fescue (Festuca arundinacea). Leaf material from endophyte-infected (E+) and endophyte-free (E-) tall fescue populations in established plots was examined. Leaf-tissue digestates were also tested for metals, by inductively coupled plasma (ICP) mass spectrometry (MS). Seven of eleven metals (Ca, Mg, Fe, Mn, Cu, Ni, and Zn) were measured by both techniques at concentrations great enough for a reliable comparison. Mg, Zn, and Cd, a toxic metal that can be present in forage, were readily detected by LIBS, even though Cd concentrations in the plants were below levels typically achieved using ICP MS detection. Implications of these results for research on forage analysis and phytoremediation are discussed.

  14. Herbivory and competition slow down invasion of a tall grass along a productivity gradient

    NARCIS (Netherlands)

    Kuijper, DPJ; Nijhoff, DJ; Bakker, JP

    2004-01-01

    Competition models including competition for light predict that small plant species preferred by herbivores will be outshaded by taller unpreferred plant species with increasing productivity. When the tall plant species is little grazed by the herbivores, it can easily invade and dominate short

  15. Biodiesel production methods of rubber seed oil: a review

    Science.gov (United States)

    Ulfah, M.; Mulyazmi; Burmawi; Praputri, E.; Sundari, E.; Firdaus

    2018-03-01

    The utilization of rubber seed as raw material of biodiesel production is seen highly potential in Indonesia. The availability of rubber seeds in Indonesia is estimated about 5 million tons per annum, which can yield rubber seed oil about 2 million tons per year. Due to the demand of edible oils as a food source is tremendous and the edible oil feedstock costs are far expensive to be used as fuel, production of biodiesel from non-edible oils such as rubber seed is an effective way to overcome all the associated problems with edible oils. Various methods for producing biodiesel from rubber seed oil have been reported. This paper introduces an optimum condition of biodiesel production methods from rubber seed oil. This article was written to be a reference in the selection of methods and the further development of biodiesel production from rubber seed oil. Biodiesel production methods for rubber seed oils has been developed by means of homogeneous catalysts, heterogeneous catalysts, supercritical method, ultrasound, in-situ and enzymatic processes. Production of biodiesel from rubber seed oil using clinker loaded sodium methoxide as catalyst is very interesting to be studied and developed further.

  16. Biodiesel. A revision of the obtaining process by means of the transesterification of vegetables oils

    International Nuclear Information System (INIS)

    Benjumea, Pedro Nel; Agudelo, Jhon Ramiro; Zapata, Paula A; Mendoza, Raul

    2003-01-01

    Biodiesel is a fuel made from raw materials of renewable origin such as vegetable oils and animal fats. It can be used as an alternative fuel to diesels for use in diesel engines. biodiesel is produced by transesterification of large branched triglycerides into smaller, straight chain molecules of alkyl esters, using a low molecular weight alcohol and an adequate catalyst. The objective of this work is to make an overview about production technology of biodiesel. Research work has been focused in the following variables that affect yield and purity of alkyl esters: type of raw material, type and quantity of catalyst, type of alcohol, molar ratio of alcohol to vegetable oil and reaction temperature

  17. Hijacking T cell differentiation: new insights in TLX function in T-ALL.

    Science.gov (United States)

    King, Bryan; Ntziachristos, Panagiotis; Aifantis, Iannis

    2012-04-17

    TLX1 and TLX3 are two closely-related homeobox transcriptional repressors frequently misexpressed and translocated in T cell acute lymphoblastic leukemia (T-ALL). In this issue of Cancer Cell, Dadi et al. provide new insights into how these factors are recruited by ETS-1 to the TCRα enhancer and actively repress differentiation. Copyright © 2012 Elsevier Inc. All rights reserved.

  18. Oil goldenberry (Physalis peruviana L.).

    Science.gov (United States)

    Ramadan, Mohamed F; Mörsel, Jörg-T

    2003-02-12

    Whole berries, seeds, and pulp/peel of goldenberry (Physalis peruviana L.) were compared in terms of fatty acids, lipid classes, triacylglyerols, phytosterols, fat-soluble vitamins, and beta-carotene. The total lipid contents in the whole berries, seeds, and seedless parts were 2.0, 1.8, and 0.2% (on a fresh weight basis), respectively. Linoleic acid was the dominating fatty acid followed by oleic acid as the second major fatty acid. Palmitic and stearic acids were the major saturates. In pulp/peel oil, the fatty acid profile was characterized by higher amounts of saturates, monoenes, and trienes than in whole berry and seed oils. Neutral lipids comprised >95% of total lipids in whole berry oil and seed oil, while neutral lipids separated in lower level in pulp/peel oil. Triacylglycerols were the predominant neutral lipid subclass and constituted ca. 81.6, 86.6, and 65.1% of total neutral lipids in whole berry, seed, and pulp/peel oils, respectively. Nine triacylglycerol molecular species were detected, wherein three species, C54:3, C52:2, and C54:6, were presented to the extent of approximately 91% or above. The highest level of phytosterols was estimated in pulp/peel oil that contained the highest level of unsaponifiables. In both whole berry and seed oils, campesterol and beta-sitosterol were the sterol markers, whereas Delta5-avenasterol and campesterol were the main 4-desmethylsterols in pulp/peel oil. The tocopherols level was much higher in pulp/peel oil than in whole berry and seed oils. beta- and gamma-tocopherols were the major components in whole berry and seed oils, whereas gamma- and alpha-tocopherols were the main constituents in pulp/peel oil. beta-Carotene and vitamin K(1) were also measured in markedly high levels in pulp/peel oil followed by whole berry oil and seed oil, respectively. Information provided by the present work is of importance for further chemical investigation of goldenberry oil and industrial utilization of the berries as a raw

  19. Synergistic Effect of the Lactoperoxidase System and Cinnamon Essential Oil on Total Flora and Salmonella Growth Inhibition in Raw Milk

    Directory of Open Access Journals (Sweden)

    Chiraz Abbes

    2018-01-01

    Full Text Available Despite its antibacterial and antipathogenic effects, the heat treatment of milk induces undesirable changes that can be noted in the overall properties of ultrahigh temperature (UHT milk, such as changes in nutritional and organoleptic properties. Our goal is to find new nonthermal antibacterial technologies for the preservation of raw milk (RM. This study investigates the possible synergistic effect of using a combination of the lactoperoxidase system (LS and 3 μg mL−1 of cinnamon essential oil (cinnamon EO to inactivate the total flora of milk and Salmonella Hadar (S. Hadar. The LS was activated with 30 mg L−1 sodium percarbonate and 14 mg L−1 of sodium thiocyanate. Using this approach, we obtained a synergistic effect with a complete inhibition of the activity of the total flora of the milk and S. Hadar after 12 hours at 25°C. In addition, the attainment of synergy was defined when the inhibitory effect of the two compounds together was greater than the effect observed by each compound added alone. Moreover, the monitoring of the synergistic effect at 4°C for 5 days showed complete inhibition of total flora for 3 days and for S. Hadar it was up to 5 days. To summarize, the current study clearly identified a new inhibitory combination that may be used in food-based applications.

  20. Cardiotoxic Effects of Raw Opium.

    Science.gov (United States)

    Garg, Piyush; Hitawala, Asif Ali; Agarwal, Manoj

    2018-01-01

    While opioid drug toxicity and side effects of long-term opioid use during medical care are well studied, there is little information regarding effects of ingestion of raw opium. Characterization of the effects to a particular alkaloid is difficult since raw opium contains a number of alkaloids. Here, we present a case of poisoning due to ingestion of raw opium leading to severe myocardial suppression.

  1. Cardiotoxic Effects of Raw Opium

    OpenAIRE

    Garg, Piyush; Hitawala, Asif Ali; Agarwal, Manoj

    2018-01-01

    While opioid drug toxicity and side effects of long-term opioid use during medical care are well studied, there is little information regarding effects of ingestion of raw opium. Characterization of the effects to a particular alkaloid is difficult since raw opium contains a number of alkaloids. Here, we present a case of poisoning due to ingestion of raw opium leading to severe myocardial suppression.

  2. EFFECT OF NON-TRADITIONAL VEGETABLE RAW MATERIALS ON THE PROPERTIES AND BIOTECHNOLOGICAL STRUCTURE PASTRY

    Directory of Open Access Journals (Sweden)

    Y. P. Kolomnikova

    2015-01-01

    Full Text Available Summary. An important task is the use of catering in the preparation of food products of new types of raw materials, which can solve the problem of nutrition. One way to improve the quality and range of flour culinary products is the use of technology in their enriching additives plant. Among them are a subgroup of additives derived from cereals, pulses, oilseeds, vegetables, fruit and other plant materials. As a result of researches the technology buns bakery products with the addition of oil and meal of wheat germ, pumpkin seed oil cake. Wheat germ oil cake is a source of complete protein and biologically active substances, is rich in essential amino acids, unsaturated ω-3, ω-6 fatty acids, vitamin E, D, B1, B2, B6, PP, pantothenic and folic acid, carotenoids. The composition of pumpkin seed oil cake include essential oils, phytosterols, resinous substances, organic acids, vitamins C and B, carotenoids, carbohydrate melen. In the composition of wheat germ oil contains: all essential, not synthesized by the human amino acid (tryptophan, methionine, leucine, valine, isoleucine, polyunsaturated fatty acids (ω-3, ω-6 and ω-9 acid, a large amount of vitamins, micro - and macronutrients. In the development of the experimental basis for the formulation chosen butter bakery products, in which part of the wheat flour (20 % was replaced by wheat germ oil cake (10 % and pumpkin seed oil cake (10 %. Margarine in the classical formulation was replaced by wheat germ oil, sugar - on natural honey. Insertion additives significantly improve the properties of biotech pastry. The proposed method of production of buns bakery products can reduce the duration of the production process, to intensify the process of gas formation in the test to increase gas-retaining capacity and lift test.

  3. Natural convection and wall radiation in tall cavities

    Energy Technology Data Exchange (ETDEWEB)

    Balaji, C [Regional Engineering College, Tiruchirapalli (India). Dept. of Mechanical Engineering; Venkateshan, S P [Indian Inst. of Tech., Madras (India). Dept. of Mechanical Engineering

    1996-12-01

    The problem of combined natural convection and wall radiation in tall cavities has been taken up for a detailed numerical investigation. The governing equations for fluid flow have been solved by a finite volume method and the radiation has been treated by the radiosity-irradiation method. The analysis has been specifically made for the case where the emissivity of the hot left wall is different from that of the cold right wall. For this case it was found that decoupling radiation from free convection can lead to considerable error. Correlations have been suggested for predicting both the convective as well as the radiative heat transfer rates across the cavity. (author). 7 refs., 3 figs., 3 tabs.

  4. Natural convection and wall radiation in tall cavities

    International Nuclear Information System (INIS)

    Balaji, C.; Venkateshan, S.P.

    1996-01-01

    The problem of combined natural convection and wall radiation in tall cavities has been taken up for a detailed numerical investigation. The governing equations for fluid flow have been solved by a finite volume method and the radiation has been treated by the radiosity-irradiation method. The analysis has been specifically made for the case where the emissivity of the hot left wall is different from that of the cold right wall. For this case it was found that decoupling radiation from free convection can lead to considerable error. Correlations have been suggested for predicting both the convective as well as the radiative heat transfer rates across the cavity. (author). 7 refs., 3 figs., 3 tabs

  5. The watering of tall trees--embolization and recovery.

    Science.gov (United States)

    Gouin, Henri

    2015-03-21

    We can propound a thermo-mechanical understanding of the ascent of sap to the top of tall trees thanks to a comparison between experiments associated with the cohesion-tension theory and the disjoining pressure concept for liquid thin-films. When a segment of xylem is tight-filled with crude sap, the liquid pressure can be negative although the pressure in embolized vessels remains positive. Examples are given that illustrate how embolized vessels can be refilled and why the ascent of sap is possible even in the tallest trees avoiding the problem due to cavitation. However, the maximum height of trees is limited by the stability domain of liquid thin-films. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Phenolation of vegetable oils

    Directory of Open Access Journals (Sweden)

    ZORAN S. PETROVIĆ

    2011-04-01

    Full Text Available Novel bio-based compounds containing phenols suitable for the syn­thesis of polyurethanes were prepared. The direct alkylation of phenols with different vegetable oils in the presence of superacids (HBF4, triflic acid as ca­talysts was studied. The reaction kinetics was followed by monitoring the de­crease of the double bond content (iodine value with time. In order to under­stand the mechanism of the reaction, phenol was alkylated with model com­pounds. The model compounds containing one internal double bond were 9-oc­tadecene and methyl oleate and those with three double bonds were triolein and high oleic safflower oil (82 % oleic acid. It was shown that the best structures for phenol alkylation are fatty acids with only one double bond (oleic acid. Fatty acids with two double bonds (linoleic acid and three double bonds (lino­lenic acid lead to polymerized oils by a Diels–Alder reaction, and to a lesser extent to phenol alkylated products. The reaction product of direct alkylation of phenol with vegetable oils is a complex mixture of phenol alkylated with poly­merized oil (30–60 %, phenyl esters formed by transesterification of phenol with triglyceride ester bonds (<10 % and unreacted oil (30 %. The phenolated vegetable oils are new aromatic–aliphatic bio-based raw materials suitable for the preparation of polyols (by propoxylation, ethoxylation, Mannich reactions for the preparation of polyurethanes, as intermediates for phenolic resins or as bio-based antioxidants.

  7. The Effect of pH on Liquid-Liquid Extraction Efficiency of Phytosterols from Tall Soap

    Czech Academy of Sciences Publication Activity Database

    Rousková, Milena; Heyberger, Aleš; Čárský, M.; Tříska, Jan; Krtička, M.

    2011-01-01

    Roč. 16, č. 1 (2011), s. 17-29 ISSN 1026-9185 Institutional research plan: CEZ:AV0Z40720504; CEZ:AV0Z60870520 Keywords : tall soap * phytosterols * sterols Subject RIV: CI - Industrial Chemistry, Chemical Engineering

  8. Determining the thermal and physicals properties of oil processing products

    Directory of Open Access Journals (Sweden)

    Viktoria I. Kryvda

    2015-03-01

    Full Text Available In the last decades both technological process’ improvement and primary energy resources saving are the main tasks of oil refineries. Using various oil products does impose an accurate knowledge of their properties. The dispersion analysis applied makes possible to construct a model simulating the primary oil refining products’ and raw materials’ thermal physical properties. As a result of data approximation there were obtained polynomials with coefficients differing from attributable to the studied oil products fractions. The research represents graphic dependences of thermal physical properties on temperature values for diesel oil fraction. The linear character of density and calorific capacity dependencies from temperature is represented with a proportional error in calculations. The relative minimum error is below 2% that confirms the implemented calculations’ adequacy. The resulting model can be used in calculations for further technological process improvements.

  9. Recovery of light oil from organic materials

    Energy Technology Data Exchange (ETDEWEB)

    Schultz, E; Schultz, E L

    1927-10-04

    To recover a high percentage of light oil from organic materials, such as crude oil, shale, and the like, the raw material, as crude oil, is vaporized in a still. The vapors are passed into a converter constructed of zinc, nickel, and lead, or sherardized steel, and contain lime and zinc chloride or zinc oxide and are agitated by paddles. The gases react under pressure which is maintained therein and gradually increased, as the temperatures in the still and converter are both gradually increased, so that after the gases have been condensed an odorless high grade light oil is produced. A pressure of from 2 to 10 lb per square inch is maintained in the converter by means of an expansion valve of the needle type, which is located in the vapor outlet pipe between the converter and the condenser. In a modified form of apparatus, a dephlegmator is located between the converter and the condenser.

  10. Oil spill response in the marine environment

    International Nuclear Information System (INIS)

    Doerffer, J.W.

    1992-01-01

    The rapid economic development of many countries since World War II has caused a considerable increase in marine transportation of raw materials, especially of crude oils and in offshore activities. However, a significant amount of oil comes into the sea from operational discharges of ships (ballast and bilge water) as well as from incidents such as collisions, groundings and contacts, and offshore exploration and exploitation of oil and gas. These incidents have been the pivotal points in the approach of maritime nations to the protection of the marine environment through international legislation and implementation of rigorous requirements concerning the construction and exploitation of ships and offshore platforms, limiting the possibility and extent of oil spills. A new danger for marine environments has ensued recently though the increasing maritime transport of chemicals. The aim of this book is to introduce these problems, and reflect the level and trends of development in this field. (Author)

  11. Glances on the year 1998. Energies and raw materials; Regards sur 1998. Energies et matieres premieres

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    This report summarizes 14 key-topics of the year 1998 in relation with the French energy and economic policy: the new start-up of energy mastery; the nuclear industry between passion and reason; the labour inspection in nuclear power plants; the law project for the modernizing and development of the electric power public utility; the main gas transportation systems; the future of Gardanne`s mining basin; the raw materials in the upheaval; the French refining activity after the Auto-Oil directive; the oil company fusions; the priorities in petroleum technology research; the policy of automotive fuels distribution; the energy in regions; the mining activity in New Caledonia; the end of the BRGM-Normandy partnership. A calendar of remarkable facts is given at the end. (J.S.)

  12. Nutrition and In Vitro Digestibility of Tall Fescue for White-Tailed Deer, May Through November

    Science.gov (United States)

    G.E. Probasco; A.J. Bjugstad

    1978-01-01

    Describes a study of the nutritive quality and digestibility of ferilized and unfertilized tall fescue in spring, summer, and fall. The grass may be most valuable as food in early spring and late fall, and on unfertilized sites.

  13. Sphingosine-1-Phosphate Induces Dose-Dependent Chemotaxis or Fugetaxis of T-ALL Blasts through S1P1 Activation

    Science.gov (United States)

    Messias, Carolina V.; Santana-Van-Vliet, Eliane; Lemos, Julia P.; Moreira, Otacilio C.; Cotta-de-Almeida, Vinicius; Savino, Wilson; Mendes-da-Cruz, Daniella Arêas

    2016-01-01

    Sphingosine-1-phosphate (S1P) is a bioactive sphingolipid involved in several physiological processes including cell migration and differentiation. S1P signaling is mediated through five G protein-coupled receptors (S1P1-S1P5). S1P1 is crucial to the exit of T-lymphocytes from the thymus and peripheral lymphoid organs through a gradient of S1P. We have previously observed that T-ALL and T-LBL blasts express S1P1. Herein we analyzed the role of S1P receptors in the migratory pattern of human T-cell neoplastic blasts. S1P-triggered cell migration was directly related to S1P1 expression. T-ALL blasts expressing low levels of S1P1 mRNA (HPB-ALL) did not migrate toward S1P, whereas those expressing higher levels of S1P1 (MOLT-4, JURKAT and CEM) did migrate. The S1P ligand induced T-ALL cells chemotaxis in concentrations up to 500 nM and induced fugetaxis in higher concentrations (1000–10000 nM) through interactions with S1P1. When S1P1 was specifically blocked by the W146 compound, S1P-induced migration at lower concentrations was reduced, whereas higher concentrations induced cell migration. Furthermore, we observed that S1P/S1P1 interactions induced ERK and AKT phosphorylation, and modulation of Rac1 activity. Responding T-ALL blasts also expressed S1P3 mRNA but blockage of this receptor did not modify migratory responses. Our results indicate that S1P is involved in the migration of T-ALL/LBL blasts, which is dependent on S1P1 expression. Moreover, S1P concentrations in the given microenvironment might induce dose-dependent chemotaxis or fugetaxis of T-ALL blasts. PMID:26824863

  14. Sphingosine-1-Phosphate Induces Dose-Dependent Chemotaxis or Fugetaxis of T-ALL Blasts through S1P1 Activation.

    Directory of Open Access Journals (Sweden)

    Carolina V Messias

    Full Text Available Sphingosine-1-phosphate (S1P is a bioactive sphingolipid involved in several physiological processes including cell migration and differentiation. S1P signaling is mediated through five G protein-coupled receptors (S1P1-S1P5. S1P1 is crucial to the exit of T-lymphocytes from the thymus and peripheral lymphoid organs through a gradient of S1P. We have previously observed that T-ALL and T-LBL blasts express S1P1. Herein we analyzed the role of S1P receptors in the migratory pattern of human T-cell neoplastic blasts. S1P-triggered cell migration was directly related to S1P1 expression. T-ALL blasts expressing low levels of S1P1 mRNA (HPB-ALL did not migrate toward S1P, whereas those expressing higher levels of S1P1 (MOLT-4, JURKAT and CEM did migrate. The S1P ligand induced T-ALL cells chemotaxis in concentrations up to 500 nM and induced fugetaxis in higher concentrations (1000-10000 nM through interactions with S1P1. When S1P1 was specifically blocked by the W146 compound, S1P-induced migration at lower concentrations was reduced, whereas higher concentrations induced cell migration. Furthermore, we observed that S1P/S1P1 interactions induced ERK and AKT phosphorylation, and modulation of Rac1 activity. Responding T-ALL blasts also expressed S1P3 mRNA but blockage of this receptor did not modify migratory responses. Our results indicate that S1P is involved in the migration of T-ALL/LBL blasts, which is dependent on S1P1 expression. Moreover, S1P concentrations in the given microenvironment might induce dose-dependent chemotaxis or fugetaxis of T-ALL blasts.

  15. Some basic properties of environmentally adapted oils

    Energy Technology Data Exchange (ETDEWEB)

    Hoeglund, E. [Div. of Machine Elements, Luleaa University of Technology (Sweden)

    1998-11-01

    Environmental concern has led to a development of lubricants that are less harmful to the environmental than traditional mineral based oils. Biodegradability and non-toxicity are desired properties together with a competitive price and if possible they should also be derived from renewable raw materials. In order to have a major breakthrough for the new, environmentally adapted lubricating oils they must perform well in mechanical and hydraulic systems. They must reduce wear, increase efficiency and reduce maintenance costs equally well, or preferably better than mineral based oils. This paper presents primary results from an investigation where four environmentally adapted oils (rape seed, pine tree, diester and TMP-ester) are compared to a conventional naphthenic mineral oil. Viscosity and viscosity-pressure coefficients, limiting shear stress, friction properties and film forming ability have been evaluated under elastohydrodynamic conditions. It was found that the mineral oil had the highest values of pressure-viscosity coefficient, limiting shear stress and coefficient of friction. Rape seed oil had the second highest pressure-viscosity coefficient but the lowest limiting shear stress and coefficient of friction. Pine tree oil, diester and TMP-ester formed an intermediate group with rather similar results. The Hamrock-Dowson equation for central film thickness was found to overestimate film thickness by about 10-20 per cent with the least discrepancy for the mineral oil. (orig.) 8 refs.

  16. Effect of grazing seedhead-suppressed tall fescue pasture on the vasoactivity of serotonin receptors

    Science.gov (United States)

    Previous research has demonstrated that exposure to ergot alkaloids reduces vasoactivity of serotonin (5HT) receptors. Chemical suppression of tall fescue seedhead production is a tool to reduce the level of exposure to ergot alkaloids by a grazing animal. Therefore, the objective was to evaluate co...

  17. Plan and justification for a Proof-of-Concept oil shale facility. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-01

    The technology being evaluated is the Modified In-Situ (MIS) retorting process for raw shale oil production, combined with a Circulating Fluidized Bed Combustor (CFBC), for the recovery of energy from the mined shale. (VC)

  18. Characterization of industrial wastes as raw materials for Emulsified Modified Bitumen (EMB) formulation

    Science.gov (United States)

    Najib Razali, Mohd; Isa, Syarifah Nur Ezatie Mohd; Salehan, Noor Adilah Md; Musa, Musfafikri; Aziz, Mohd Aizudin Abd; Nour, Abdurahman Hamid; Yunus, Rosli Mohd

    2018-04-01

    This study was conducted to characterize industrial wastes for formulation of emulsified modified bitumen (EMB) in relation to their physical characteristic and elemental composition. This analysis will give information either raw materials from industrial wastes can be used for EMB formulation. Bitumen is produced from crude oil that is extracted from the ground which categorizes the crude oil as one of the non-renewable form of product. A vast environmental problem issues arises in Malaysia cause by the excessive manufacturing activity that lead to a miss-management of industrial waste has leads to the used of industrial waste in the EMB formulation. Industrial waste such as polystyrene, polyethylene and used automotive oil can be used as alternative to formulate bitumen. Then a suitable emulsifier needs to be added to produce the final product which is EMB. The emulsifier will yield a charge depends on its properties to bind the oily bitumen with water. Physical characteristic studies were performed by thermogravimetric Analysis (TGA), differential scanning calorimetry (DSC), flash point test, density rest and moisture content test. Fourier Transform Infrared Spectroscopy (FTIR) analysis was measured to determine the material’s molecular composition and structure.

  19. Evaluation of modal pushover-based scaling of one component of ground motion: Tall buildings

    Science.gov (United States)

    Kalkan, Erol; Chopra, Anil K.

    2012-01-01

    Nonlinear response history analysis (RHA) is now increasingly used for performance-based seismic design of tall buildings. Required for nonlinear RHAs is a set of ground motions selected and scaled appropriately so that analysis results would be accurate (unbiased) and efficient (having relatively small dispersion). This paper evaluates accuracy and efficiency of recently developed modal pushover–based scaling (MPS) method to scale ground motions for tall buildings. The procedure presented explicitly considers structural strength and is based on the standard intensity measure (IM) of spectral acceleration in a form convenient for evaluating existing structures or proposed designs for new structures. Based on results presented for two actual buildings (19 and 52 stories, respectively), it is demonstrated that the MPS procedure provided a highly accurate estimate of the engineering demand parameters (EDPs), accompanied by significantly reduced record-to-record variability of the responses. In addition, the MPS procedure is shown to be superior to the scaling procedure specified in the ASCE/SEI 7-05 document.

  20. Photosynthate partitioning in basal zones of tall fescue leaf blades

    International Nuclear Information System (INIS)

    Allard, G.; Nelson, C.J.

    1991-01-01

    Elongating grass leaves have successive zones of cell division, cell elongation, and cell maturation in the basal portion of the blade and are a strong sink for photosynthate. Our objective was to determine dry matter (DM) deposition and partitioning in basal zones of elongating tall fescue (Festuca arundinacea Schreb.) leaf blades. Vegetative tall fescue plants were grown in continuous light (350 micromoles per square meter per second photosynthetic photon flux density) to obtain a constant spatial distribution of elongation growth with time. Content and net deposition rates of water-soluble carbohydrates (WSC) and DM along elongating leaf blades were determined. These data were compared with accumulation of 14 C in the basal zones following leaf-labeling with 14 CO 2 . Net deposition of DM was highest in the active cell elongation zone, due mainly to deposition of WSC. The maturation zone, just distal to the elongation zone, accounted for 22% of total net deposition of DM in elongating leaves. However, the spatial profile of 14 C accumulation suggested that the elongation zone and the maturation zone were sinks of equal strength. WSC-free DM accounted for 55% of the total net DM deposition in elongating leaf blades, but only 10% of incoming 14 C-photosynthate accumulated in the water-insoluble fraction (WIF ∼ WSC-free DM) after 2 hours. In the maturation zone, more WSC was used for synthesis of WSC-free DM than was imported as recent photosynthate

  1. Enhancing Nutraceutical Bioavailability from Raw and Cooked Vegetables Using Excipient Emulsions: Influence of Lipid Type on Carotenoid Bioaccessibility from Carrots.

    Science.gov (United States)

    Zhang, Ruojie; Zhang, Zipei; Zou, Liqiang; Xiao, Hang; Zhang, Guodong; Decker, Eric Andrew; McClements, David Julian

    2015-12-09

    The influence of the nature of the lipid phase in excipient emulsions on the bioaccessibility and transformation of carotenoid from carrots was investigated using a gastrointestinal tract (GIT) model. Excipient emulsions were fabricated using whey protein as an emulsifier and medium-chain triglycerides (MCT), fish oil, or corn oil as the oil phase. Changes in particle size, charge, and microstructure were measured as the carrot-emulsion mixtures were passed through simulated mouth, stomach, and small intestine regions. Carotenoid bioaccessibility depended on the type of lipids used to form the excipient emulsions (corn oil > fish oil ≫ MCT), which was attributed to differences in the solubilization capacity of mixed micelles formed from different lipid digestion products. The transformation of carotenoids was greater for fish oil and corn oil than for MCT, which may have been due to greater oxidation or isomerization. The bioaccessibility of the carotenoids was higher from boiled than raw carrots, which was attributed to greater disruption of the plant tissue facilitating carotenoid release. In conclusion, excipient emulsions are highly effective at increasing carotenoid bioaccessibility from carrots, but lipid type must be optimized to ensure high efficacy.

  2. The Synthesis of Biodiesel from Used Temple Oil

    Science.gov (United States)

    Saddu, Sharanabasappa; Kivade, S. B.; Ramana, P.

    2018-05-01

    Safe and sustainable resources of energy is required for the financial and industrial growth. A new approach in investigating, growth, production and the economy is necessary, for the future reorganization of a sustainable natural raw material. In India, because of many mythological and religious beliefs thousands of devotees pour oil in lamps in various temples and also over the idols in Hanuman and Shani temples. This poured oil cannot be utilized and was ultimately wasted. One of tender advertisements by department of Muzarai of Karnataka Government, the used oil potential at shree Renuka yallamma temple Soundatti, Belagavi district is 18,900 kg for the year 2016-2017. This is only one temple oil potential; the number of Hindu temples in India is a Puzzle. This used temple oil was used as alternative feedstock, to decrease the cost of bio fuel. Using ASTM standard methods, the properties of used temple oil biodiesel were analyzed. From the tests it is clear that the, properties of used temple oil biodiesel are similar to diesel fuel. The obtained yield of biodiesel was 94.51%. This study identified that the price of the feedstock was one of the most significant factors.

  3. An alkali catalyzed trans-esterification of rice bran, cottonseed and waste cooking oil

    Directory of Open Access Journals (Sweden)

    Akhtar Faheem H.

    2014-01-01

    Full Text Available In this research work, biodiesel production by trans-esterification of three raw materials including virgin and used edible oil and non edible oil has been presented. A two step method following acidic and alkali catalyst was used for non edible oil due to the unsuitability of using the straight alkaline-catalyzed trans-esterification of high FFA present in rice bran oil. The acid value after processing for rice bran, cottonseed and waste cooking oil was found to be 0.95, 0.12 and 0.87 respectively. The influence of three variables on percentage yield i.e., methanol to oil molar ratio, reaction temperature and reaction time were studied at this stage. Cottonseed oil, waste cooking oil and rice bran oil showed a maximum yield of 91.7%, 84.1% and 87.1% under optimum conditions. Fuel properties of the three biodiesel satisfied standard biodiesel fuel results.

  4. Biodiesel Production from Acidified Oils via Supercritical Methanol

    Directory of Open Access Journals (Sweden)

    Jianxin Li

    2011-12-01

    Full Text Available In biodiesel production, the vegetable oil used as raw material for transesterification should be free of water and free fatty acids (FFAs, which may consume catalyst and reduce catalyst efficiency. In this work biodiesel was prepared from acidified oils (AO through a supercritical methanol route, in which the esterification of FFAs and transesterification of glyceride with methanol occurred simultaneously. The effects of the mass ratio of methanol to AO, the operation temperature as well as the water content on the FFAs conversion and glycerol yield were investigated. The results indicated that the FFAs conversion for esterification under the condition of 1:1 methanol/oil ratio, 310 °C and 15 min reaction time reached 98.7%, and the glycerol yield for transesterification under 0.25:1 methanol/oil ratio, 290 °C and 20 min reaction time reached 63.5% respectively.

  5. Linkage Maps of a Mediterranean × Continental Tall Fescue Population and their Comparative Analysis with Other Poaceae Species

    Directory of Open Access Journals (Sweden)

    Ryan Dierking

    2015-03-01

    Full Text Available Temperate grasses belonging to the complex are important throughout the world in pasture and grassland agriculture. Tall fescue ( Schreb. is the predominant species in the United States, covering approximately 15 million ha. Tall fescue has distinctive morphotypes, two of which are Continental (summer active and Mediterranean (summer semidormant. This is the first report of a linkage map created for Mediterranean tall fescue, while updating the Continental map with additional simple sequence repeat and sequence-tagged site markers. Additionally, this is the first time that diversity arrays technology (DArT markers were used in the construction of a tall fescue map. The male parent (Continental, R43-64, map consisted of 594 markers arranged in 22 linkage groups (LGs and covered a total of 1577 cM. The female parent (Mediterranean, 103-2, map was shorter (1258 cM and consisted of only 208 markers arranged in 29 LGs. Marker densities for R43-64 and 103-2 were 2.65 and 6.08 cM per marker, respectively. When compared with the other Poaceae species, meadow fescue ( Huds., annual ryegrass ( Lam., perennial ryegrass ( L., (L. Beauv., and barley ( L., a total of 171 and 98 orthologous or homologous sequences, identified by DArT analysis, were identified in R43-64 and 103-2, respectively. By using genomic in situ hybridization, we aimed to identify potential progenitors of both morphotypes. However, no clear conclusion on genomic constitution was reached. These maps will aid in the search for quantitative trait loci of various traits as well as help define and distinguish genetic differences between the two morphotypes.

  6. Climate change and Epichloë coenophiala association modify belowground fungal symbioses of tall fescue host

    Science.gov (United States)

    Human alteration of symbiont genetics among aboveground endophytic Epichloë coenophiala strains within tall fescue (Schedonorus arundinaceus) has led to widespread deployment of novel grass-endophyte combinations, yet little is known about their ecological consequences. In this study, clone pairs (e...

  7. Preliminary studies on allelopatic effect of some woody plants on seed germination of rye-grass and tall fescue.

    Science.gov (United States)

    Arouiee, H; Nazdar, T; Mousavi, A

    2010-11-01

    In order to investigation of allelopathic effects of some ornamental trees on seed germination of rye-grass (Lolium prenne) and tall fescue (Festuca arundinaceae), this experiment was conducted in a randomized complete block design with 3 replicates at the laboratory of Horticultural Sciences Department of Ferdowsi University of Mashhad, during 2008. In this research, we studied the effect of aqueous and hydro-alcoholic extracts of Afghanistan pine (Pinus eldarica), arizona cypress (Cupressus arizonica), black locust (Robinia psedue acacia) and box elder (Acer negundo) leaves that prepared in 1:5 ratio on seed germination percent and rate for two grasses. The results showed that all extracts decreased statistically seed germination in compared to control treatment. The highest germination percentage and germination rate of tested grass detected in control treatment. Hydro-alcoholic extracts of all woody plants (15, 30%) were completely inhibited seed germination of rye-grass and tall fescue. Also aqueous extract of arizona cypress was completely inhibited seed germination of tall fescue and had more inhibitory activity than other aqueous extracts on rye-grass. Between aqueous extracts, the highest and lowest seed germination of rye-grass was found in Afghanistan pine and arizona cypress, respectively.

  8. Tall-building development process in downtown Maringá-PR, Brazil

    Directory of Open Access Journals (Sweden)

    José Roberto Machado

    2012-02-01

    Full Text Available This work describes the urbanization process taking place in the city of Maringá, in the context of the tallbuilding development at its main economic axis, the city center. This research aims to conduct an in-depth analysis of the role played by the housing industry in the development of tall buildings at downtown Maringá, the origin of the capital associated to such process, and the rationale for building them in Zone 1 (downtown. This is also analyzed considering local environmental information and infrastructural considerations involved in this process.

  9. Develop a New Lesquerella fendleri Crop for Castor Oil Production

    Science.gov (United States)

    Seed oil of Lesquerella fendleri contains a valuable hydroxy fatty acid (HFA), lesquerolic acid (20:1OH). The conventional source of HFA is ricinoleic acid (18:1OH) from castor seeds. Ricinoleic acid and its derivatives are used as raw materials for numerous industrial products, such as lubricants, ...

  10. Annual report 2001. General direction of energy and raw materials

    International Nuclear Information System (INIS)

    2001-01-01

    This report summarizes the 2001 activity of the French general direction of energy and raw materials (DGEMP) of the ministry of finances and industry: 1 - security of energy supplies: a recurrent problem; 2001, a transition year for nuclear energy worldwide; petroleum refining in font of the 2005 dead-line; the OPEC and the upset of the oil market; the pluri-annual planning of power production investments; renewable energies: a reconfirmed priority; 2 - the opening of markets: the opening of French electricity and gas markets; the international development of Electricite de France (EdF) and of Gaz de France (GdF); electricity and gas industries: first branch agreements; 3 - the present-day topics: 2001, the year of objective contracts; AREVA, the future to be prepared; the new IRSN; the agreements on climate and the energy policy; the mastery of domestic energy consumptions; the safety of hydroelectric dams; Technip-Coflexip: the birth of a para-petroleum industry giant; the cleansing of the mining activity in French Guyana; the future of workmen of Lorraine basin coal mines; 4 - 2001 at a glance: highlights; main legislative and regulatory texts; 5 - DGEMP: November 2001 reorganization and new organization chart; energy and raw materials publications; www.industrie.gouv.fr/energie. (J.S.)

  11. The Anglo-Iranian oil dispute

    International Nuclear Information System (INIS)

    Ferrier, R.W.

    1988-01-01

    This paper traces the history of the Anglo-Iranian oil dispute. It is short-sighted to consider the Anglo-Iranian oil dispute just as a contest between Musaddiq and the AIOC: it is of wider and greater significance. The dispute illustrates a transitional phase in the difficult process of the adjustment of relations between industrialized and less developed societies for the exploitation of raw materials. Oil was already becoming a political and economic factor at the end of the Qajar period and became important during the reign of Riza Shah with his emphasis on a national program of modernization. After more attention had been focused on it during the second world war it was inevitable that it would increase in influence. The issues of the oil dispute referred back to the concessional controversies of the late nineteenth century in tobacco, mining, communications, utilities, banking even gambling, with their political and social implications; and they referred forward to the issues of the sovereignty of national resources, the transfer of technology and economic growth in relation to the standard of living. These are aspects of the North-South debate, which have yet to be satisfactorily resolved

  12. Mixed Integer Linear Programming model for Crude Palm Oil Supply Chain Planning

    Science.gov (United States)

    Sembiring, Pasukat; Mawengkang, Herman; Sadyadharma, Hendaru; Bu'ulolo, F.; Fajriana

    2018-01-01

    The production process of crude palm oil (CPO) can be defined as the milling process of raw materials, called fresh fruit bunch (FFB) into end products palm oil. The process usually through a series of steps producing and consuming intermediate products. The CPO milling industry considered in this paper does not have oil palm plantation, therefore the FFB are supplied by several public oil palm plantations. Due to the limited availability of FFB, then it is necessary to choose from which plantations would be appropriate. This paper proposes a mixed integer linear programming model the supply chain integrated problem, which include waste processing. The mathematical programming model is solved using neighborhood search approach.

  13. Effects of processing techniques on oxidative stability of Prunus pedunculatus seed oil

    Directory of Open Access Journals (Sweden)

    J. Yan

    2017-09-01

    Full Text Available This paper investigated the effects of Prunus pedunculatus (P. pedunculatus seed pre-treatment, including microwaving (M, roasting (R, steaming (S and roasting plus steaming (RS on crude oil quality in terms of yield, color change, fatty acid composition, and oxidative stability. The results showed an increase in monounsaturated fatty acid content and oxidative stability of the oils obtained from different processing treatments compared to the oil obtained from raw seeds (RW without processing. The oils, obtained from pretreated seeds, had higher conjugated diene (CD and 2-thiobarbituric acid (2-TBA values, compared to that obtained from RW when stored in a Schaal oven at 65 °C for 168 h. However, polyphenol and tocopherol contents decreased in all oil samples, processed or unprocessed. The effect of pre-treating the seeds was more prominent in the oil sample obtained through the RS technique, and showed higher oxidative stability than the other processed oils and the oil from RW.

  14. Economic and technical considerations on the use of vegetable oils as fuel substitute for diesel oil; Consideracoes economicas e tecnicas sobre o uso de oleos vegetais combustiveis como substituto de oleo diesel

    Energy Technology Data Exchange (ETDEWEB)

    Mourad, Anna Lucia [Universidade Estadual de Campinas (DE/FEM/UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica. Dept. de Energia], Email: anna@ital.sp.gov.br

    2006-07-01

    The introduction of bio diesel in the Brazilian energy matrix has been mainly motivated by the governmental actions, which foresees social and economical development to the country in a program that allows the use of different oil seed crops as raw materials for biofuels production. Cost estimates considering the average price received by the farmer and the oil content of each vegetable shows that the minimum cost of bio fuel was about 1,1(castor bean); 1,8(peanut); 2,0(soy beans); 3,3(corn) higher than the average cost of fossil diesel from 1975 to 2004. Among the evaluated raw materials, only the palm oil had inferior cost compared to the petroleum diesel (0.6%). The oleaginous plants that have a higher oil content and smaller agricultural production cost to produce bio fuels are economically most feasible and they should be prioritized in the government program so that it may become economically sustainable along the years, as well as generate adequate profit to the farmers of each culture. The feasibility of National Program for Biofuels Use and Production and both economical and environmental aspects should also consider the destination of the main by-products of the biofuel productive chain such as the left over cakes after extraction of the oil and glycerine produced during the transesterification process. (author)

  15. Variability in coconut (Cocos nucifera L.) germplasm and hybrids for fatty acid profile of oil.

    Science.gov (United States)

    Kumar, S Naresh

    2011-12-28

    Coconut oil, the main product of coconut fruit, is the richest source of glycerol and lauric acid and hence is called lauric oil. This paper reports the fatty acid profile of oil from 60 Talls, 14 Dwarfs, and 34 hybrids. These include collections from 13 countries covering a large coconut-growing area of the world, apart from the indigenous ones. Capillary gas chromatography analysis of oil indicated a wider variation for the fatty acid profile than earlier reported. Apart from this, for the first time other fatty acids such as behenic and lignoceric acids were detected. Oil from cultivars and hybrids of coconut has significantly differed, particularly for commercially important fatty acids such as lauric acid and unsaturated fatty acids. However, coconut oil seems to have a conserved fatty acid profile, mainly because of low unsaturated fatty acids, indicating the possibility of grouping cultivars on the basis of their fatty acid profiles. The cluster analysis based on fatty acid profile indicated grouping together of geographically and typically closely related cultivars. Cultivars with high concentrations of specific fatty acids can be of potential use for industrial exploitation, whereas those with high concentrations of short- and medium-chain fatty acids and unsaturated fatty acids are more suitable for human consumption. Cultivars and hybrids with high and low values for each of the fatty acids are also identified.

  16. Challenges of managing disease in tall orchard trees – pecan scab, a case study

    Science.gov (United States)

    Managing disease in tall orchard trees presents unique issues not found in relatively shorter horticultural and agronomic crops, simply due to height. Pecan scab (caused by Fusicladium effusum [G. Winter] Seyran et al.) is used as an example of a major disease of one of the tallest orchard crops in ...

  17. Synthesis and application of polyaminoamide as new paraffin inhibitor from vegetable oil

    OpenAIRE

    Chen, Gang; Tang, Ying; Zhang, Jie

    2011-01-01

    Abstract In this work, a series of novel paraffin inhibitor, polyaminoamide (PAA), was designed and prepared by aminolysis and poly-condensation using soybean oil and canola oil as the raw material. The property of the PAAs as paraffin inhibitor was investigated, the results show several PAA samples are potent in paraffin inhibition, and PPC-2 is the most effective one. Besides, the paraffin crystal morphology analysis was carried out to provide the mechanism of paraffin inhibition.

  18. Influence of radiation on tar fraction of the bituminous oil

    International Nuclear Information System (INIS)

    Mustafayev, I.I.; Guliyeva, N.G.; Ibadov, N.E.; Melikova, S.Z.

    2014-01-01

    Full text : The chromato-masspectrometric and IR-spectrometric copic studies of bituminous oil samples irradiated in air and in vacuum are conducted. In the IR spectra of the gamma-irradiated samples, the optical density of some groups has been determined. It can be assumed that as a result of irradiation of the samples both in air and in vacuum, occurs a decrease of optical density both in aliphatic groups and the double bonds. The 27 individual components of initial and irradiated bituminous oil samples identified by mass-spectrometry. The high radiation stability of bituminous oils allows the use of it as a raw material for water proofing material, applied in terms of radiation influence

  19. Raw data

    DEFF Research Database (Denmark)

    Walford, Antonia

    2017-01-01

    . Although science and technology studies (STS) makes a strong case for associating relationality with certainty, the article argues that a particular form of data, ‘raw data’, complicates this association. It further argues that scientific data is not simply composed out of relations, but is a relation......This article takes scientific ‘raw data’ as its ethnographic object in order to investigate the co-implication of nature and culture in scientific knowledge practices. The article traces out some of the activities that are involved in producing numerical climate data from the Brazilian Amazon...... itself. The article ends with a brief reflection on the possible repercussions of shifting from thinking of science as producing multiple natures and cultures to thinking of it as producing the potential for relations....

  20. Proceedings of 1.International scientific and technological conference 'Modern problems of geophysics, geology, development, processing and use of Kazakhstan hydrocarbon raw materials'. v. 1-2

    International Nuclear Information System (INIS)

    2000-01-01

    Proceedings of reports presented on 1.International scientific and technological conference 'Modern problems of geophysics, geology, development, processing and use of Kazakhstan hydrocarbon raw materials', devoted to the 20th anniversary of the Atyrau Institute of Oil and Gas (Atyrau, 2000, 18-19 December) are published in 2 volumes. The problems and new methods for prediction of oil and gas as well as different resources in both the coastal lands and the shelf of the Caspian Sea are considered. Scientific problems of drilling and repair of oil and gas wells are highlighted. Results of fundamental and applied studies on problems of oil and oil products processing, its transportation through pipelines with taking into account rheological and physico-chemical properties of oils mining on western fields of the Republic are cited. The points of ecological safety guarantee, reliability of mechanisms and machines operation and others problems are widely discussed

  1. Vasoconstriction in horses caused by endophyte-infected tall fescue seed is detected with Doppler ultrasonography

    Science.gov (United States)

    The hypotheses that endophyte (Neotyphodium coenophialum)-infected tall fescue (TF) seed causes vasoconstriction in horses in vivo and that ground seed would cause more pronounced vasoconstriction than whole seed were tested. Ten horses each received 1 of 3 treatments: endophyte-free ground (E–G; n ...

  2. Transfer of thallium from rape seed to rape oil is negligible and oil is fit for human consumption.

    Science.gov (United States)

    Loula, Martin; Kaňa, Antonín; Vosmanská, Magda; Koplík, Richard; Mestek, Oto

    2016-01-01

    Rape and other Brassicaceae family plants can accumulate appreciable amounts of thallium from the soil. Because some species of this family are common crops utilised as food for direct consumption or raw materials for food production, thallium can enter the food chain. A useful method for thallium determination is inductively coupled plasma mass spectrometry. The limit of detection (0.2 pg ml(-1) Tl or 0.02 ng g(-1) Tl, taking in the account dilution during sample decomposition) found in the current study was very low, and the method can be used for ultra-trace analysis. Possible transfer of thallium from rape seed to the rape oil was investigated in two ways. The balance of thallium in rape seed meal (content 140-200 ng g(-1) Tl) and defatted rape seed meal indicated that thallium did not pass into the oil (p thallium in six kinds of edible rape seed oil and three kinds of margarines showed that the amount of thallium in rape seed oil is negligible.

  3. UV curable palm oil based ink

    International Nuclear Information System (INIS)

    Mek Zah Salleh; Mohd Hilmi Mahmood; Khairul Zaman Mohd Dahlan; Rosley Che Ismail

    2002-01-01

    UV curable inks are useful for their instant drying, energy saving and high productivity properties. The basic materials for formulating UV curable inks consist of prepolymer, monomers, photoinitiators, pigments and other additives. The percentage composition and ingredients depend very much on the types of inks to be produced. Palm oil is one of the main raw materials available in the country. Hence, the diversification of palm oil derivatives into new products has been given priority. The current focus of the present work is to evaluate the use of palm oil urethane acrylate (POBUA) as a prepolymer in the UV ink system. A study was conducted on the use of POBUA with other materials in ink formulation. These include the types and concentration of photoinitiators, monomers and commercial urethane acrylates. The evaluation of the ink properties such as curing, adhesion, color density have been carried out. It was found that POBUA could be introduced in the UV ink system. (Author)

  4. UV curable palm oil based inks

    International Nuclear Information System (INIS)

    Mek Zah Salleh; Hilmi Mahmood

    2002-01-01

    UV curable inks are useful for their instant drying, energy saving and high productivity properties. The basic materials for formulating UV curable inks consist of prepolymer, monomers, photoinitiators, pigments and other additives. The percentage composition and ingredients depend very much on the types of inks to be produced. Palm oil is one of the main raw materials available in the country. Hence, the diversification of palm oil derivatives into new products has been given priority. The current focus of the present work is to evaluate the use of palm oil based urethane acrylate (POBUA) as a prepolymer in the UV inks system. A study was conducted on the use of POBUA with other materials in ink formulation. These include the types and concentration of photoinitiators, monomers and commercial urethane acrylates. The evaluation of the ink properties such as curing, adhesion, color density have been carried out. It was found that POBUA could be introduced in the UV ink system. (Author)

  5. The Effect Of Additional Detergent In Crude Palm Oil In The Process Of Separation Stearin

    Science.gov (United States)

    Rezekyah Hasibuan, Vina; aini, Nur; Febriyanti; Ayubi Pane, Salahudin Al

    2018-03-01

    This study aims to find out how much stearin is formed from the addition of detergent and to understand the process of separation of crude olein with crude stearin from raw material of crude palm oil (CPO). Using a detergent fractionation system, detergent fractionation is a continuous crystallization of oil with controlled cooling and the separation of fractions by weight or centrifuge after supplementing surfactant.

  6. Alterations in serotonin receptor-induced contractility of bovine lateral saphenous vein in cattle grazing endophyte-infected tall fescue.

    Science.gov (United States)

    Klotz, J L; Brown, K R; Xue, Y; Matthews, J C; Boling, J A; Burris, W R; Bush, L P; Strickland, J R

    2012-02-01

    As part of a 2-yr study documenting the physiologic impact of grazing endophyte-infected tall fescue on growing cattle, 2 experiments were conducted to characterize and evaluate effects of grazing 2 levels of toxic endophyte-infected tall fescue pastures on vascular contractility and serotonin receptors. Experiment 1 examined vasoconstrictive activities of 5-hydroxytryptamine (5HT), α-methylserotonin (ME5HT; a 5HT(2) receptor agonist), d-lysergic acid (LSA), and ergovaline (ERV) on lateral saphenous veins collected from steers immediately removed from a high-endophyte-infected tall fescue pasture (HE) or a low-endophyte-infected mixed-grass (LE) pasture. Using the same pastures, Exp. 2 evaluated effects of grazing 2 levels of toxic endophyte-infected tall fescue on vasoconstrictive activities of (±)-1-(2,5-dimethoxy-4-iodophenyl)-2-aminopropane hydrochloride (DOI), BW 723C86 (BW7), CGS-12066A (CGS), and 5-carboxamidotryptamine hemiethanolate maleate (5CT), agonists for 5HT(2A),( 2B), 5HT(1B), and 5HT(7) receptors, respectively. One-half of the steers in Exp. 2 were slaughtered immediately after removal from pasture, and the other one-half were fed finishing diets for >91 d before slaughter. For Exp. 1, maximal contractile intensities were greater (P 91 d. Experiment 1 demonstrated that grazing of HE pastures for 89 to 105 d induces functional alterations in blood vessels, as evidenced by reduced contractile capacity and altered serotonergic receptor activity. Experiment 2 demonstrated that grazing HE pastures alters vascular responses, which may be mediated through altered serotonin receptor activities, and these alterations may be ameliorated by the removal of ergot alkaloid exposure as demonstrated by the absence of differences in finished steers.

  7. Mitigating the negative impacts of tall wind turbines on bats: Vertical activity profiles and relationships to wind speed.

    Science.gov (United States)

    Wellig, Sascha D; Nusslé, Sébastien; Miltner, Daniela; Kohle, Oliver; Glaizot, Olivier; Braunisch, Veronika; Obrist, Martin K; Arlettaz, Raphaël

    2018-01-01

    Wind turbines represent a source of hazard for bats, especially through collision with rotor blades. With increasing technical development, tall turbines (rotor-swept zone 50-150 m above ground level) are becoming widespread, yet we lack quantitative information about species active at these heights, which impedes proposing targeted mitigation recommendations for bat-friendly turbine operation. We investigated vertical activity profiles of a bat assemblage, and their relationships to wind speed, within a major valley of the European Alps where tall wind turbines are being deployed. To monitor bat activity we installed automatic recorders at sequentially increasing heights from ground level up to 65 m, with the goal to determine species-specific vertical activity profiles and to link them to wind speed. Bat call sequences were analysed with an automatic algorithm, paying particular attention to mouse-eared bats (Myotis myotis and Myotis blythii) and the European free-tailed bat (Tadarida teniotis), three locally rare species. The most often recorded bats were the Common pipistrelle (Pipistrellus pipistrellus) and Savi's pipistrelle (Hypsugo savii). Mouse-eared bats were rarely recorded, and mostly just above ground, appearing out of risk of collision. T. teniotis had a more evenly distributed vertical activity profile, often being active at rotor level, but its activity at that height ceased above 5 ms-1 wind speed. Overall bat activity in the rotor-swept zone declined with increasing wind speed, dropping below 5% above 5.4 ms-1. Collision risk could be drastically reduced if nocturnal operation of tall wind turbines would be restricted to wind speeds above 5 ms-1. Such measure should be implemented year-round because T. teniotis remains active in winter. This operational restriction is likely to cause only small energy production losses at these tall wind turbines, although further analyses are needed to assess these losses precisely.

  8. Population structures of Brazilian tall coconut (Cocos nucifera L.) by microsatellite markers

    Science.gov (United States)

    2010-01-01

    Coconut palms of the Tall group were introduced to Brazil from the Cape Verde Islands in 1553. The present study sought to evaluate the genetic diversity among and within Brazilian Tall coconut populations. Samples were collected of 195 trees from 10 populations. Genetic diversity was accessed by investigating 13 simple sequence repeats (SSR) loci. This provided a total of 68 alleles, ranging from 2 to 13 alleles per locus, with an average of 5.23. The mean values of gene diversity (He ) and observed heterozygosity (Ho ) were 0.459 and 0.443, respectively. The genetic differentiation among populations was estimated at θ^P=0.1600and the estimated apparent outcrossing rate was ta = 0.92. Estimates of genetic distances between the populations varied from 0.034 to 0.390. Genetic distance and the corresponding clustering analysis indicate the formation of two groups. The first consists of the Baía Formosa, Georgino Avelino, and São José do Mipibu populations and the second consists of the Japoatã, Pacatuba, and Praia do Forte populations. The correlation matrix between genetic and geographic distances was positive and significant at a 1% probability. Taken together, our results suggest a spatial structuring of the genetic variability among the populations. Geographically closer populations exhibited greater similarities. PMID:21637579

  9. Development and material properties of new hybrid plywood from oil palm biomass

    International Nuclear Information System (INIS)

    Abdul Khalil, H.P.S.; Nurul Fazita, M.R.; Bhat, A.H.; Jawaid, M.; Nik Fuad, N.A.

    2010-01-01

    Shortage of wood as a raw material has forced wood-based industries to find alternative local raw materials. Currently, oil palm biomass is undergoing research and development (R and D) and appears to be the most viable alternative. This work examines the conversion of oil palm trunk (OPT) and oil palm empty fruit bunches (OPEFB) into new plywood and analyses its properties. We prepared five-ply veneer hybrid plywood (alternating layers of oil palm trunk veneer and empty fruit bunch mat) with different spread levels (300 g/m 2 and 500 g/m 2 ) of resins (phenol formaldehyde and urea formaldehyde). We then studied the mechanical and physical properties of the plywood. The results show that hybridisation of EFB with OPT improves some properties of plywood, such as bending strength, screw withdrawal and shear strength. The thermal properties of the plywood panels were studied by thermogravimetric analysis (TGA). The panels glued with phenol formaldehyde with a spread level of 500 g/m 2 showed better thermal stability than the other panels. Scanning electron microscope (SEM) was used to study the fibre matrix bonding and surface morphology of the plywood at different glue spread levels of the resins. The fibre-matrix bonding showed good improvement for the hybrid panel glued with 500 g/m 2 phenol formaldehyde.

  10. Method for selecting raw materials to preparing ceramic masses: application to raw material for red ceramic

    International Nuclear Information System (INIS)

    Moreno, Maria Margarita Torres; Rocha, Rogers Raphael da; Zanard, Antenor

    2012-01-01

    We studied the raw materials used in a factory building blocks, located in Cesario Lange city (SP). It extracts raw materials from various sources in the region to make the dough. The mixtures were prepared from dry milled powders based on data related to the plasticity of the raw materials. It was obtained with the apparatus Vicat-cone in order to obtain similar levels of water absorption of the samples burned at 900 deg C for all compositions. To quantify the proportion of each clay was used the Lever Rule. In this firing temperature, where sintering is mainly by diffusion from a solid state, different compositions of the same set of four raw materials resulted in similar values. (author)

  11. Source Signature of Volatile Organic Compounds (VOCs) associated with oil and natural gas operations in Utah and Colorado

    Science.gov (United States)

    Gilman, J.; Lerner, B. M.; Warneke, C.; Holloway, J. S.; Peischl, J.; Ryerson, T. B.; Young, C. J.; Edwards, P.; Brown, S. S.; Wolfe, D. E.; Williams, E. J.; De Gouw, J. A.

    2012-12-01

    The U.S. Energy Information Administration has reported a sharp increase in domestic oil and natural gas production from "unconventional" reserves (e.g., shale and tight sands) between 2005 and 2012. The recent growth in drilling and fossil fuel production has led to environmental concerns regarding local air quality. Severe wintertime ozone events (greater than 100 ppb ozone) have been observed in Utah's Uintah Basin and Wyoming's Upper Green River Basin, both of which contain large natural gas fields. Raw natural gas is a mixture of approximately 60-95 mole percent methane while the remaining fraction is composed of volatile organic compounds (VOCs) and other non-hydrocarbon gases. We measured an extensive set of VOCs and other trace gases near two highly active areas of oil and natural gas production in Utah's Uintah Basin and Colorado's Denver-Julesburg Basin in order to characterize primary emissions of VOCs associated with these industrial operations and identify the key VOCs that are precursors for potential ozone formation. UBWOS (Uintah Basin Winter Ozone Study) was conducted in Uintah County located in northeastern Utah in January-February 2012. Two Colorado studies were conducted at NOAA's Boulder Atmospheric Observatory in Weld County in northeastern Colorado in February-March 2011 and July-August 2012 as part of the NACHTT (Nitrogen, Aerosol Composition, and Halogens on a Tall Tower) and SONNE (Summer Ozone Near Natural gas Emissions) field experiments, respectively. The C2-C6 hydrocarbons were greatly enhanced for all of these studies. For example, the average propane mixing ratio observed during the Utah study was 58 ppb (median = 35 ppb, minimum = 0.8, maximum = 520 ppb propane) compared to urban averages which range between 0.3 and 6.0 ppb propane. We compare the ambient air composition from these studies to urban measurements in order to show that the VOC source signature from oil and natural gas operations is distinct and can be clearly

  12. Catalyst systems in the production of biodiesel from residual oil; Sistemas cataliticos na producao de biodiesel por meio de oleo residual

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Carlos Alexandre de [Universidade Federal de Itajuba (UNIFEI), MG (Brazil)

    2006-07-01

    The vegetable oils and fat animals appear like an alternative for substitution the diesel oil in ignition engines for compression. Submitting the oil on transesterification reaction, we obtain a fuel with same characteristics as diesel, called biodiesel. Generally, 85 per cent of biodiesel cost is from the oil production. Through transesterification vegetable oil can be transformed in a mixture of esters of fatty acids. The residual oil from frying has been used as a possibility of raw materials of biodiesel, due to its easy acquisition and the viability of not being discarded as waste. (author)

  13. Constraints on Nitrous Oxide emissions within the US Corn Belt using tall tower observations and an Eulerian Modeling Approach

    Science.gov (United States)

    Chen, Z.; Griffis, T. J.; Lee, X.; Fu, C.; Dlugokencky, E. J.; Andrews, A. E.

    2017-12-01

    Mitigation of nitrous oxide (N2O) emissions requires a sound understanding of N2O production processes and a robust estimate of N2O budgets. It is critical to understand how emissions vary spatially and temporally, and how they are likely to change given future climate and land management decisions. To address these challenges we have coupled two models including WRF-Chem version 3.8.1 and CLM-GBC-CROP version 4.5 to simulate retrospective and future N2O emissions for the US Corn Belt. Using 7 years (2010-2016) of N2O mixing ratio data from 6 tall tower sites within the US Midwest, we ran the coupled model at a spatial resolution of 0.125o× 0.125o and tested and optimized the simulation of N2O emissions at hourly, seasonal, and inter-annual timescales. Our preliminary results indicate:1) The simulated tall tower mixing ratios for 6 tall towers were all significantly higher than the observations in the growing seasons, indicating a high bias of N2O emissions when using the default N2O production mechanisms in CLM. 2) Following the optimization of N2O production in CLM, the simulated tall tower mixing ratios were strongly correlated with the KCMP and WBI towers, and had moderate correlation with the BAO tower. Overall, the absolute biases in mixing ratios were relatively small. Our next step is to examine 7 years of simulations to assess the spatiotemporal variations of direct and indirect emissions within the US Corn Belt to help identify potential N2O hotspots and hot moments.

  14. Bio-Detergent oil derivative used frying

    Directory of Open Access Journals (Sweden)

    Alfonso Jesús Torres Ortega

    2011-04-01

    Full Text Available Currently, the global trend towards sustainable development for environmental friendly products such as biosurfactants shows an excellent performance. Anionic surface active agents can be produced from renewable natural raw materials such as vegetable oils mainly derived from palm oil. Methyl ester sulfonate is an active component of highly biodegradable detergents, one advantage compared with detergents derived from petrochemicals which generate a high pollutant load. This paper proposes the study of sulfonation with sulfur trioxide of esters derived from waste cooking oil which main component is palm oil. The falling film reactor allows determining the conditions of the process at pilot scale. The experimentation allowed an enhancement of empirical equations in the equipment implemented for this purpose and to determine some physicochemical properties. The comparison obtained for this same process with petrochemicals compounds indicates that the model could be applied to any film sulfonation but adjusting the parameters and specific conditions, such as the physicochemical properties of the compounds used, since the sulfonation process described in this work is one of the more complicated cases. The technological development presented here seeks to contribute with the industrial needs to promote green chemical industry for the production of biosurfactant from waste frying oil.

  15. Yellow passion fruit seed oil (Passiflora edulis f. flavicarpa: physical and chemical characteristics

    Directory of Open Access Journals (Sweden)

    Cassia Roberta Malacrida

    2012-02-01

    Full Text Available The aim of this study was to determine the chemical composition -physico-chemical properties, fatty acid and tocopherol compositions and total phenolic compounds -and evaluate the radical-scavenging activity of crude oil extracted from passion fruit (Passiflora edulis f. flavicarpa seeds, aiming to use the agro-industrial by-products. The oil seed extraction was performed by Soxhlet method and the oil yield from the seeds was 30.39%. The oil showed high levels of unsaturated fatty acids (87.59%, including mainly linoleic (73.14% and oleic (13.83% acids, tocopherol (499.30 mg/kg and phenolic compounds (1,314.13 mg GAE/kg. The physico-chemical characteristics were similar to those of other edible oils and the oil showed significant antioxidant activity. Therefore, the potential utilization of the passion fruit seed oil as a raw material for food, chemical and pharmaceutical industries could be favorable.

  16. Biodiesel production using calcium manganese oxide as catalyst and different raw materials

    International Nuclear Information System (INIS)

    Dias, Joana Maia; Conceição Machado Alvim-Ferraz, Maria; Fonseca Almeida, Manuel; Méndez Díaz, José Diego; Sánchez Polo, Manuel; Rivera Utrilla, José

    2013-01-01

    Highlights: ► Biodiesel production using a calcium manganese oxide catalyst was studied. ► The active specie was Ca 0.9 Mn 0.1 O and its deactivation occurred by hydration. ► The studied catalyst presented lower activation temperature than CaO. ► Biodiesel production and quality using different raw materials is reported. ► Compared to the conventional process, biodiesel water content improved. - Abstract: The use of heterogeneous catalysts for biodiesel production aims to simplify the production process as well as to reduce purification costs and related environmental impacts. Calcium manganese oxide was recently identified by the authors as an interesting heterogeneous catalyst for biodiesel production from animal fat; however, the difference between this and other catalysts, the catalyst activation/deactivation mechanisms, its behaviour in the synthesis using different raw materials as well as the impacts of its use on product quality remained unclear. Therefore, the present work: (i) compared biodiesel production using calcium manganese oxide and other catalysts (CaO and NaOH); (ii) studied the reasons leading to activation/deactivation of the heterogeneous catalyst; (iii) analysed biodiesel heterogeneous synthesis using calcium manganese oxide and different raw materials (lard, waste frying oil and a mixture); and (iv) evaluated raw material and catalyst impact on the product quality. Considering the use of different catalysts, the results showed that, after 8 h of reaction, product purity was similar using the different catalysts, being 92.5 wt.% using both NaOH and calcium manganese oxide and 93.8 wt.% using CaO. The active species of the heterogeneous catalysts were CaO, in the case of calcinated calcium carbonate, and Ca 0.9 Mn 0.1 O, in the case of calcinated calcium manganese oxide. Because the deactivating species were different for both catalysts, the calcium manganese oxide required lower activation temperature, which should be an advantage

  17. Spectrophotometric method for quantitative measuring essential oil in aromatic water and distillate with rose smell

    International Nuclear Information System (INIS)

    Semenova, E; Moiseeva, I; Presnyakova, V; Goncharov, D; Goncharov, M; Presnyakova, E; Presnyakov, S; Kolesnikova, S

    2017-01-01

    In this connection, we improved the express methods of determining the mixture of volatile aromatic substances by the spectrophotometry of aromatic water and steam distillate of essential oil raw materials (traditional or biotechnological with rose smell). Direct spectrophotometry of distillation water is impossible because it is a colloid of liquid oil and law is not observed. Therefore, it is necessary to dissolve 1 ml of distillate in ethanol in the ratio 1:4, in this case we take real solution with no lipophilic fall-out on the walls of cuvette, also the light absorption law is observed. There are stable maximums in spectrums of studied oils. Optical density of these maximums is a result of summary absorption of terpenoid components (aromatic and monoterpene alcohols, its ethers). Optical density of tested and standard solutions is measured in appropriate wavelengths. Spectrophotometric method of determination of essential oil quantity in aromatic water with rose smell differs with high sensitivity (10 -5 -10 -6 gmol/l) and allows to determine oil concentration from 0,900 to 0,008 mg with an error less than 1%. At that, 1 ml is enough for analysis. It’s expedient to apply this method while operating with small quantity of water distillate in biochemical and biotechnological researches and also as express control for extraction and hydrodistillation of essential oil raw material (rose petals and flowers from different origin, eremothecium cultural liquid etc.). (paper)

  18. Bulls grazing Kentucky 31 tall fescue exhibit impaired growth, semen quality, and decreased semen freezing potential

    Science.gov (United States)

    Serum prolactin (PRL) and testosterone concentrations, body weight, body composition, semen quality, and semen freezing potential for bulls grazing the toxic tall fescue (Lolium arundinaceum [Schreb.] Darbysh. ¼ Schedonorous arundinaceum [Schreb.] Dumort.) cultivar Kentucky 31 (E+) compared with a n...

  19. Continuous transesterification of biodiesel in a helicoidal reactor using recycled oil

    International Nuclear Information System (INIS)

    Avellaneda, Fredy; Salvado, Joan

    2011-01-01

    The main problem with biodiesel is the high cost of oils made from oleaginous crops. For this reason, various raw materials have been analysed with a view to reducing production costs and obtaining a product that can compete with the price of petrodiesel. Recycled oil is one of the most promising alternatives in the production of biodiesel because not only is the cheapest raw material but it also avoids the expense of treating the oil as a residue. Another way to reduce costs is to make the process more economical. Conventional technology uses sodium hydroxide as the basic catalyst and large-scale batch reactors, whose mechanical agitation requires high energy consumption due to residence times of at least 60 min and temperatures of 60 C. In this paper we use a recycled pretreated oil to compare conventional transesterification with continuous transesterification in a tubular reactor. In this reactor the reactants (oil, methanol and sodium hydroxide) flow through a helicoidal tube submerged in a heating bath at 60 C. The reactor has five outlets distributed non-uniformly to enable samples to be taken at different reaction times. This is to reduce the reaction time and avoid the need for mechanical agitation. With the aim of improving the quality of the biodiesel obtained, we varied the helicoidal system by incorporating a static micromixer and supplying energy in the form of ultrasound from the heating bath. This reactor produced biodiesel and glycerine at compositions roughly equal to those obtained in the batch process (89% FAME content at 75 min) but did so continuously (2.5 mL/min) and just 13 min after the reactants were integrated in a single line using a T device. Both the oil and the biodiesel were characterized and analysed in accordance with European standard UNE EN14214 for biodiesel. (author)

  20. Lipase-catalyzed biodiesel production from waste activated bleaching earth as raw material in a pilot plant.

    Science.gov (United States)

    Park, Enoch Y; Sato, Masayasu; Kojima, Seiji

    2008-05-01

    The production of fatty acid methyl esters (FAMEs) from waste activated bleaching earth (ABE) discarded by the crude oil refining industry using lipase from Candida cylindracea was investigated in a 50-L pilot plant. Diesel oil or kerosene was used as an organic solvent for the transesterification of triglycerides embedded in the waste ABE. When 1% (w/w) lipase was added to waste ABE, the FAME content reached 97% (w/w) after reaction for 12 h at 25 degrees C with an agitation rate of 30 rpm. The FAME production rate was strongly dependent upon the amount of enzyme added. Mixtures of FAME and diesel oil at ratios of 45:55 (BDF-45) and 35:65 (BDF-35) were assessed and compared with the European specifications for biodiesel as automotive diesel fuel, as defined by pr EN 14214. The biodiesel quality of BDF-45 met the EN 14214 standard. BDF-45 was used as generator fuel, and the exhaust emissions were compared with those of diesel oil. The CO and SO2 contents were reduced, but nitrogen oxide emission increased by 10%. This is the first report of a pilot plant study of lipase-catalyzed FAME production using waste ABE as a raw material. This result demonstrates a promising reutilization method for the production of FAME from industrial waste resources containing vegetable oils for use as a biodiesel fuel.

  1. CO2 Capture by Cement Raw Meal

    DEFF Research Database (Denmark)

    Pathi, Sharat Kumar; Lin, Weigang; Illerup, Jytte Boll

    2013-01-01

    The cement industry is one of the major sources of CO2 emissions and is likely to contribute to further increases in the near future. The carbonate looping process has the potential to capture CO2 emissions from the cement industry, in which raw meal for cement production could be used...... as the sorbent. Cyclic experiments were carried out in a TGA apparatus using industrial cement raw meal and synthetic raw meal as sorbents, with limestone as the reference. The results show that the CO2 capture capacities of the cement raw meal and the synthetic raw meal are comparable to those of pure limestone...... that raw meal could be used as a sorbent for the easy integration of the carbonate looping process into the cement pyro process for reducing CO2 emissions from the cement production process....

  2. The Physiological, Morphological and Bio-Chemical Comparison of the Current Grass Shiraz City’s Green Space withTall Fescue (Festuca arundinacea Schreb

    Directory of Open Access Journals (Sweden)

    M. Zadehbagheri

    2016-02-01

    Full Text Available One of the main problems of Shiraz city’s green space is the change of color and visual quality of turf during cold months. Therefore, we aimed to evaluate tall fescue in order to find if it is suitable for replacement. This experiment was in the form of complete random blocks and it was done during two consecutive years. Each treatment had 4 repetitions. Data were analyzed using SPSS software, version 16.0, and the means were compared using t or LSD tests at a significance level of 5%. The results showed that tall fescue was superior to normal sport grass in cold months with respect to its chlorophyll, catalase, protein, prolin, and soluble sugar content, as well as its visual quality and root depth. Prolin fluctuations in tall fescue were very high which showed that these types of grass can increase the plant’s prolin content under stress. Therefore, there is a fivefold increase in the prolin content of the grass in cold months (cold tension compared to the beginning of spring (best condition for growth. However, this change does not exist in sport grass. Based on the obtained results we can conclude that tall fescue can resist environmental tension, especially coldness, using different mechanisms, and is a good substitute for normal sport grass.

  3. Looking back in time: conducting a cohort study of the long-term effects of treatment of adolescent tall girls with synthetic hormones

    Directory of Open Access Journals (Sweden)

    Bruinsma Fiona J

    2011-11-01

    Full Text Available Abstract Objective Public health research is an endeavour that often involves multiple relationships, far-reaching collaborations, divergent expectations and various outcomes. Using the Tall Girls Study as a case study, this paper will present and discuss a number of methodological, ethical and legal challenges that have implications for other public health research. Approach The Tall Girls Study was the first study to examine the long-term health and psychosocial effects of oestrogen treatment for tall stature. Results In undertaking this study the research team overcame many hurdles: in maintaining collaboration with treating clinicians and with the women they had treated as girls - groups with opposing points of view and different expectations; using private practice medical records to trace women who had been patients up to forty years earlier; and exploring potential legal issues arising from the collection of data related to treatment. Conclusion While faced with complex challenges, the Tall Girls Study demonstrated that forward planning, ongoing dialogue between all stakeholders, transparency of processes, and the strict adherence to group-developed protocols were keys to maintaining rigour while undertaking pragmatic research. Implications Public health research often occurs within political and social contexts that need to be considered in the planning and conduct of studies. The quality and acceptability of research findings is enhanced when stakeholders are engaged in all aspects of the research process.

  4. Exogenous Calcium Enhances the Photosystem II Photochemistry Response in Salt Stressed Tall Fescue.

    Science.gov (United States)

    Wang, Guangyang; Bi, Aoyue; Amombo, Erick; Li, Huiying; Zhang, Liang; Cheng, Cheng; Hu, Tao; Fu, Jinmin

    2017-01-01

    Calcium enhances turfgrass response to salt stress. However, little is known about PSII photochemical changes when exogenous calcium was applied in salinity-stressed turfgrass. Here, we probe into the rearrangements of PSII electron transport and endogenous ion accumulation in tall fescue ( Festuca arundinacea Schreber) treated with exogenous calcium under salt stress. Three-month-old seedlings of genotype "TF133" were subjected to the control (CK), salinity (S), salinity + calcium nitrate (SC), and salinity + ethylene glycol tetraacetic acid (SE). Calcium nitrate and ethylene glycol tetraacetic acid was used as exogenous calcium donor and calcium chelating agent respectively. At the end of a 5-day duration treatment, samples in SC regime had better photochemistry performance on several parameters than salinity only. Such as the Area (equal to the plastoquinone pool size), N (number of [Formula: see text] redox turnovers until F m is reached), ψE 0 , or δRo (Efficiencdy/probability with which a PSII trapped electron is transferred from Q A to Q B or PSI acceptors), ABS/RC (Absorbed photon flux per RC). All the above suggested that calcium enhanced the electron transfer of PSII (especially beyond [Formula: see text]) and prevented reaction centers from inactivation in salt-stressed tall fescue. Furthermore, both grass shoot and root tissues generally accumulated more C, N, Ca 2+ , and K + in the SC regime than S regime. Interrelated analysis indicated that ψE 0 , δRo, ABS/RC, C, and N content in shoots was highly correlated to each other and significantly positively related to Ca 2+ and K + content in roots. Besides, high salt increased ATP6E and CAMK2 transcription level in shoot at 1 and 5 day, respectively while exogenous calcium relieved it. In root, CAMK2 level was reduced by Salinity at 5 day and exogenous calcium recovered it. These observations involved in electron transport capacity and ion accumulation assist in understanding better the protective role

  5. Exogenous Calcium Enhances the Photosystem II Photochemistry Response in Salt Stressed Tall Fescue

    Directory of Open Access Journals (Sweden)

    Guangyang Wang

    2017-11-01

    Full Text Available Calcium enhances turfgrass response to salt stress. However, little is known about PSII photochemical changes when exogenous calcium was applied in salinity-stressed turfgrass. Here, we probe into the rearrangements of PSII electron transport and endogenous ion accumulation in tall fescue (Festuca arundinacea Schreber treated with exogenous calcium under salt stress. Three-month-old seedlings of genotype “TF133” were subjected to the control (CK, salinity (S, salinity + calcium nitrate (SC, and salinity + ethylene glycol tetraacetic acid (SE. Calcium nitrate and ethylene glycol tetraacetic acid was used as exogenous calcium donor and calcium chelating agent respectively. At the end of a 5-day duration treatment, samples in SC regime had better photochemistry performance on several parameters than salinity only. Such as the Area (equal to the plastoquinone pool size, N (number of QA- redox turnovers until Fm is reached, ψE0, or δRo (Efficiencdy/probability with which a PSII trapped electron is transferred from QA to QB or PSI acceptors, ABS/RC (Absorbed photon flux per RC. All the above suggested that calcium enhanced the electron transfer of PSII (especially beyond QA- and prevented reaction centers from inactivation in salt-stressed tall fescue. Furthermore, both grass shoot and root tissues generally accumulated more C, N, Ca2+, and K+ in the SC regime than S regime. Interrelated analysis indicated that ψE0, δRo, ABS/RC, C, and N content in shoots was highly correlated to each other and significantly positively related to Ca2+ and K+ content in roots. Besides, high salt increased ATP6E and CAMK2 transcription level in shoot at 1 and 5 day, respectively while exogenous calcium relieved it. In root, CAMK2 level was reduced by Salinity at 5 day and exogenous calcium recovered it. These observations involved in electron transport capacity and ion accumulation assist in understanding better the protective role of exogenous calcium in tall

  6. SENSITIVITY OF MOLDS ISOLATED FROM WAREHOUSES OF FOOD PRODUCTION FACILITY ON SELECTED ESSENTIAL OILS

    Directory of Open Access Journals (Sweden)

    Łukasz Kręcidło

    2015-07-01

    Full Text Available Storage of raw materials is one of steps in food production chain. The aim of this study was to estimate the influence of selected essential oils on the growth of four fungal strains: Trichoderma viride, Rhizomucor miehei, Penicillium chrysogenum, Penicillium janthinellum. Strains were isolated from warehouses of the food production facility. Selected essential oils: thyme oil, rosewood oil and rosemary oil were used to assess antifungal activity. Chemical composition of essential oils was determined by Gas Chromatography-Mass Spectroscopy (GC-MS. Antifungal activity of essential oils was estimated in relative to peracetic acid (PAA and sterile water with Tween 80 (0,5%. The influence of essential oils on fungal growth was carried by medium poisoning method. Increment of fungal mycelium was measured every day by 10 days. The thyme essential oils totally inhibited fungal growth in the lowest concentration of 1 mm3·cm-3. The most resistant strain was Penicillium janthinellum.

  7. Water management challenges and perspective for surface oil sands operations in North Eastern Alberta

    International Nuclear Information System (INIS)

    MacKinnon, M.

    2009-01-01

    Oil sands waters has many sources, such as raw water inputs (import water and hydrologic waters); oil sands ore water such as formation water; and oil sands process-affected water (OSPW) such as produced water and released water from tailings. This presentation demonstrated the importance of water to oil sands operations and indicated how oil sands processing affects water quality. Water imports to meet oil sands needs is a topic of particular interest. Other topics that were presented included water properties changing during oil sands operations; tailings management and the effects on water quality; oil sands tailings and water management and the impact on water quality of the region; how oil sands processing affected water quality; and current tailings approach and proposed new tailings methods and the effects on water composition. Post extraction changes in OSPW and the potential impacts of engineered tailings were also discussed. It was concluded that water treatment options must meet water management objectives. figs.

  8. Progress on the development of seismic resilient Tall CLT Buildings in the Pacific Northwest

    Science.gov (United States)

    Shiling Pei; Jeffrey Berman; Daniel Dolan; John van de Lindt; James Ricles; Richard Sause; Hans-Erik Blomgren; Marjan Popovski; Douglas Rammer

    2014-01-01

    As urban densification occurs in U.S. regions of high seismicity, there is a natural demand for seismically resilient tall buildings that are reliable, economically viable, and can be rapidly constructed. In urban regions on the west coast of the U.S., specifically the Pacific Northwest, there is significant interest in utilizing CLT in 8-20 story residential and...

  9. The ultrasound-assisted aqueous extraction of rice bran oil.

    Science.gov (United States)

    Khoei, Maryam; Chekin, Fereshteh

    2016-03-01

    In this work, aqueous extraction of rice bran oil was done without and with ultrasound pretreatment. Key factors controlling the extraction and optimal operating conditions were identified. The highest extraction efficiency was found at pH=12, temperature of 45°C, agitation speed of 800rpm and agitation time of 15min, ultrasound treatment time of 70min and ultrasound treatment temperature of 25°C. Moreover, extraction yields were compared to ultrasound-assisted aqueous extraction and Soxhlet extraction. The results showed that the yield of rice bran oil at ultrasound-assisted aqueous extraction was close to the yield of oil extracted by hexane Soxhlet extraction. This result implied that the yield of rice bran oil was significantly influenced by ultrasound. With regard to quality, the oil extracted by ultrasound-assisted aqueous process had a lower content of free fatty acid and lower color imparting components than the hexane-extracted oil. Also, effect of parboiling of paddy on hexane and ultrasound-assisted aqueous extraction was studied. Both extraction methods gives higher percentage of oil from par boiled rice bran compared with raw rice bran. This may be due to the fact that parboiling releases the oil. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. A prototype statistical approach of oil pollution in the Mediterranean Sea

    International Nuclear Information System (INIS)

    Ventikos, N.P.; Psaraftis, H.N.

    1998-01-01

    In this paper, we present a detailed statistical survey of oil pollution in the greater area of the Mediterranean Sea (with a preference in the Greek Seas: eg. the Aegean Sea or the Ioanian Sea and the respective Greek fleet). The Mediterranean Sea exhibits a noticeable increase of oil pollution within the last 15 years as documented by data that is presented within this work. A new electronic data base tool with a multitude of operational capabilities that utilizes data from the REMPEC Organization in raw format is introduced. We further present a statistical analysis of the data which differentiates each incident according to the volume of spilled oil and we conclude with some interesting results and comments. (author)

  11. The Dilemma of the Oil Market in the Current Geopolitical Context

    Directory of Open Access Journals (Sweden)

    Cristina Teodora Balaceanu

    2017-06-01

    Full Text Available In an increasingly globalized world, where the effects of technology have an overwhelming impact on people's lives, meaning an increase in appetite for consumption of luxury goods, of lifestyle, it seems that conventional resources are becoming fewer and their use in industrial processes lead to environmental harm, at least from pollution. Essentially, oil prices influence governments, companies, and markets of raw materials markets of finite economic goods, markets of conventional and unconventional energy and an assumed oil crisis would lead to stronger inflections on the market, with repercussions on the overall level of prices, the oil price being generally regarded as decisive for the other prices in the economy.

  12. Study of the influences of the zeolites physical and chemical characteristics in the soya oil cracking; Estudo das influencias das caracteristicas fisico-quimicas de zeolitas no craqueamento do oleo de soja

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Frances Regiane dos

    1995-10-01

    Vegetable oils have been studied as raw materials to yield fuel hydrocarbons. The catalytic and thermal transformations of these oils have been presented as being able to generate hydrocarbons from which diesel oil and vegetable gasoline may be obtained. (author)

  13. Quantitative analysis of the 26 allergens for cosmetic labeling in fragrance raw materials and perfume oils.

    Science.gov (United States)

    Leijs, Hans; Broekhans, Joost; van Pelt, Leon; Mussinan, Cynthia

    2005-07-13

    The adoption of the 7th amendment of the European Cosmetic Directive 76/768/EEC requires any cosmetic product containing any of 26 raw materials identified by the Scientific Committee on Cosmetic Products and Non-Food Products intended for Consumers as likely to cause a contact allergy when present above certain trigger levels to be declared on the package label. Of these 26, 24 are volatile and can be analyzed by GC. This paper describes a method for the quantitative analysis of these volatile raw materials in perfume ingredients as well as complex perfume compositions. The method uses sequential dual-column GC-MS analysis. The full-scan data acquired minimize the false-positive and false-negative identifications that can be observed with alternate methods based on data acquired in the SIM mode. For each sample, allergen levels are determined on both columns sequentially, leading to two numerical results for each allergen. Quantification limits for each allergen in a perfume mixture based on the analysis of a standard are 0.999) and stable for multiple days. Studies on perfumes spiked with multiple allergens at 30, 50, and 70 mg/kg show recoveries close to nominal values.

  14. Synthesis of polyhydroxyalkanoate from palm oil and some new applications.

    Science.gov (United States)

    Sudesh, Kumar; Bhubalan, Kesaven; Chuah, Jo-Ann; Kek, Yik-Kang; Kamilah, Hanisah; Sridewi, Nanthini; Lee, Yan-Fen

    2011-03-01

    Polyhydroxyalkanoate (PHA) is a potential substitute for some petrochemical-based plastics. This biodegradable plastic is derived from microbial fermentation using various carbon substrates. Since carbon source has been identified as one of the major cost-absorbing factors in PHA production, cheap and renewable substrates are currently being investigated as substitutes for existing sugar-based feedstock. Plant oils have been found to result in high-yield PHA production. Malaysia, being the world's second largest producer of palm oil, is able to ensure continuous supply of palm oil products for sustainable PHA production. The biosynthesis and characterization of various types of PHA using palm oil products have been described in detail in this review. Besides, by-products and waste stream from palm oil industry have also demonstrated promising results as carbon sources for PHA biosynthesis. Some new applications in cosmetic and wastewater treatment show the diversity of PHA usage. With proper management practices and efficient milling processes, it may be possible to supply enough palm oil-based raw materials for human consumption and other biotechnological applications such as production of PHA in a sustainable manner.

  15. Food safety hazards associated with consumption of raw milk.

    Science.gov (United States)

    Oliver, Stephen P; Boor, Kathryn J; Murphy, Steven C; Murinda, Shelton E

    2009-09-01

    An increasing number of people are consuming raw unpasteurized milk. Enhanced nutritional qualities, taste, and health benefits have all been advocated as reasons for increased interest in raw milk consumption. However, science-based data to substantiate these claims are limited. People continue to consume raw milk even though numerous epidemiological studies have shown clearly that raw milk can be contaminated by a variety of pathogens, some of which are associated with human illness and disease. Several documented milkborne disease outbreaks occurred from 2000-2008 and were traced back to consumption of raw unpasteurized milk. Numerous people were found to have infections, some were hospitalized, and a few died. In the majority of these outbreaks, the organism associated with the milkborne outbreak was isolated from the implicated product(s) or from subsequent products made at the suspected dairy or source. In contrast, fewer milkborne disease outbreaks were associated with consumption of pasteurized milk during this same time period. Twenty nine states allow the sale of raw milk by some means. Direct purchase, cow-share or leasing programs, and the sale of raw milk as pet food have been used as means for consumers to obtain raw milk. Where raw milk is offered for sale, strategies to reduce risks associated with raw milk and products made from raw milk are needed. Developing uniform regulations including microbial standards for raw milk to be sold for human consumption, labeling of raw milk, improving sanitation during milking, and enhancing and targeting educational efforts are potential approaches to this issue. Development of pre- and postharvest control measures to effectively reduce contamination is critical to the control of pathogens in raw milk. One sure way to prevent raw milk-associated foodborne illness is for consumers to refrain from drinking raw milk and from consuming dairy products manufactured using raw milk.

  16. Effects of fish oil replacement and re-feeding on the bioaccumulation of organochlorine compounds in gilthead sea bream (Sparus aurata L.) of market size.

    Science.gov (United States)

    Nácher-Mestre, Jaime; Serrano, Roque; Benedito-Palos, Laura; Navarro, Juan C; López, Francisco J; Pérez-Sánchez, Jaume

    2009-08-01

    Organochlorine pesticide residues and polychlorinated biphenyls were determined in raw materials, fish feeds and fillets from fish exposed through the productive cycle (14 months) to experimental diets with different percentages of fish oil replacement with vegetable oils. Detectable amounts of organochlorine compounds were found in raw materials derived from fish sources with none being detected in vegetable ingredients. Fish feeds presented trace concentrations of contaminants at the ng/g level, which varied according to the contribution of the different resources used in their manufacture. Contaminants did not accumulate during the first 11 months of exposure, and low concentrations of organochlorine compounds were found both at the start and at the end of this feeding period. Fillets from fish fed the fish oil diet presented the highest concentrations of organochlorine compounds, with these decreasing in proportion to fish oil replacement. Three months of fish oil re-feeding during the finishing phase only produced significant bioaccumulation over the course of the first month. By optimizing fish meal and fish oil replacement with vegetable oils alternative feeds can contribute to significantly reduce the risk of organochlorine uptake by consumers.

  17. Phenols and the antioxidant capacity of Mediterranean vegetables prepared with extra virgin olive oil using different domestic cooking techniques.

    Science.gov (United States)

    Ramírez-Anaya, Jessica Del Pilar; Samaniego-Sánchez, Cristina; Castañeda-Saucedo, Ma Claudia; Villalón-Mir, Marina; de la Serrana, Herminia López-García

    2015-12-01

    Potato, tomato, eggplant and pumpkin were deep fried, sautéed and boiled in Mediterranean extra virgin olive oil (EVOO), water, and a water/oil mixture (W/O). We determined the contents of fat, moisture, total phenols (TPC) and eighteen phenolic compounds, as well as antioxidant capacity in the raw vegetables and compared these with contents measured after cooking. Deep frying and sautéing led to increased fat contents and TPC, whereas both types of boiling (in water and W/O) reduced the same. The presence of EVOO in cooking increased the phenolics identified in the raw foods as oleuropein, pinoresinol, hydroxytyrosol and tyrosol, and the contents of vegetable phenolics such as chlorogenic acid and rutin. All the cooking methods conserved or increased the antioxidant capacity measured by DPPH, FRAP and ABTS. Multivariate analyses showed that each cooked vegetable developed specific phenolic and antioxidant activity profiles resulting from the characteristics of the raw vegetables and the cooking techniques. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Macauba: a promising tropical palm for the production of vegetable oil

    Directory of Open Access Journals (Sweden)

    Colombo Carlos Augusto

    2018-01-01

    Full Text Available The growing global demand for vegetable oils for food and for replacing fossil fuels leads to increased oilseeds production. Almost 122 of the current 187 million tons of vegetable oils produced in the world correspond to palm and soybean oils. The oil palm is cultivated in the tropical zone, in areas formerly occupied by forests, and soybean oil is a by-product of protein meal production. The diversification of raw materials for the vegetable oil market is thus strategic for both food and non-food sectors. Sources for vegetable oil should be economically competitive and provide sustainability indexes higher than that provided by oil palm and soybean. In this context, we describe the potential of Acrocomia aculeata, popularly known as macauba. Macauba is an American palm from the tropical zones which presents oil productivity and quality similar to that of the oil palm. It grows spontaneously in a wide range of environments and it is not very water demanding. Macauba palm has a high potential for oil production and for diversification of co-products with some potential of value aggregation. Such a perennial and sustainable species will probably fulfill the requirements to become an important new commercial oilseed crop.

  19. Selection and evaluation of technologies for oil rim preparation of Zapolyarnoye oilfield

    Science.gov (United States)

    Vazhenina, L. V.

    2017-10-01

    The article deals with various technologies for the oil rims preparation of Zapolyarnoye oil and gas condensate field. The following circuits were considered for the selection of the technology of preparation of extracted fluid: low-temperature separation (STC); low-temperature condensation (LTC); a low-temperature rectification (NTR); low-temperature absorption (LTA); membrane technology (Mt). Diagrams of these processes were collected and tested in the system HYSYS process simulation. Efficiency analysis of hydrocarbon raw materials preparation on the basis of functions, selection of components and narrow fractions.

  20. Hydrogenation of rapeseed oil for production of liquid bio-chemicals

    International Nuclear Information System (INIS)

    Pinto, F.; Martins, S.; Gonçalves, M.; Costa, P.; Gulyurtlu, I.; Alves, A.; Mendes, B.

    2013-01-01

    Highlights: ► Production of renewable liquid hydrocarbons through rapeseed oil hydrogenation. ► Hydrogenation at lower temperature and lower hydrogen pressures. ► Test of a catalyst commonly employed in petrochemical industry. ► Improve of hydrogenation process viability by decreasing operational costs. ► Analysis of hydrogenated product applications as bio-chemicals. -- Abstract: The main objective of rapeseed oil hydrogenation tests was the production of liquid bio-chemicals to be used as renewable raw material for the production of several chemicals and in chemical synthesis to substitute petroleum derived stuff. As, hydrogenation of vegetable oils is already applied for the production of biofuels, the work done focused in producing aromatic compounds, due to their economic value. The effect of experimental conditions on rapeseed oil hydrogenation was studied, namely, reaction temperature and time with the aim of selecting the most favourable conditions to convert rapeseed oil into liquid valuable bio-chemicals. Rapeseed oil was hydrogenated at a hydrogen initial pressure of 1.10 MPa. Reaction temperature varied in the range from 200 °C to 400 °C, while reaction times between 6 and 180 min were tested. The performance of a commercial cobalt and molybdenum catalyst was also studied. The highest hydrocarbons yields were obtained at the highest temperature and reaction times tested. At a temperature of 400 °C and at the reaction time of 120 min hydrocarbons yield was about 92% in catalyst presence, while in the absence of the catalyst this value decreased to 85%. Hydrocarbons yield was even higher when the reaction time of 180 min was used in the presence of catalyst, as the yield of 97% was observed. At these conditions hydrocarbons formed had a high content of aromatic compounds, around 50%. For this reason, the viscosity values of hydrogenated oils were lower than that established by EN590, which together with hydrogenated liquids composition

  1. Biodiesel Production from Rubber Seed Oil via Esterification Process

    Directory of Open Access Journals (Sweden)

    W Widayat

    2012-07-01

    Full Text Available One promise source of alternative energy is biodiesel from rubber seed oil, because the raw materials available in plentiful quantities and can be renewed. In addition, the rubber seed is still lack of utilization, and Indonesia is one of the largest rubbers producing country in the world. The objective of this research is to studied on biodiesel production by esterification process. Parameters used in this study are the ratio of catalyst and temperature and its influence on the characteristics of the resulting biodiesel product. Characterization of rubber seed include acid content number analysis, saponification numbers, density, viscosity, iodine number, type of free fatty acids and triglyceride oils. The results of analysis showed that rubber seed oil content obtained is 50.5%. The results of the GCMS analysis showed that a free fatty acid level in rubber seed is very high. Conversion into bio-diesel oil is obtained by at most 59.91% and lowest 48.24%.

  2. An ESR study of the spectra of paint pigments in 'drying' linseed oil

    International Nuclear Information System (INIS)

    Slogett, R.; Troup, G.; Hutton, D.

    1999-01-01

    Full text: Since previous ESR work on the identification of RAW paint pigments, mainly mineral, looked promising, we decided to examine the spectra when the pigments were applied, in oil, to a non-reactive, microwave transparent polymer. The polymer used shows no significant ESR signals in the range 2000-4000 gauss at ∼9.1 GHz and room temperature. The oil used is Winsor and Newton Drying Linseed Oil, and contains 'manganese driers'. The spectrum of the pure liquid oil is shown, as well as that of the dried oil on the substrate. Many of the pigment spectra shown are so strong that not a trace of the oil Mn(2+) can be seen at the pigment concentrations used. The effect of the linseed oil on modern synthetic indigo, an organic pigment still available made from plants, is also shown. ESR still looks to be a useful supplementary technique for paint pigment identification

  3. Study for the degumming pretreatment of rubber seed oil

    Science.gov (United States)

    Li, X. Y.; Chen, Y. B.; Zhang, X.; Souliyathai, D.; Yang, S. P.; Wang, Q.

    2017-11-01

    With the rapid development of the aviation industry, appearing of the aviation carbon tax and the increasingly serious environmental problems have forced the world to research the development of renewable bio-aviation fuel. Renewable biological aviation fuel contains phosphorus that could reduce the synthesis of noble metal catalysts such as Pd, Pt activity. In order to get low content of phosphorus in degummed oil of non-edible vegetable oil, in this paper, with rubber seed oil as raw material, making the experiment of single factor at the influence of temperature, stirring speed, adding amount of monoethanolamine (MEA) and water amount. The experimental results show that the added amount of MEA is 2.5% in the weight of oil, and temperature is 60°C, while the amount of added water is 2% in the weight of oil, reaction time is 40 min, and stirring speed is 200 r/min. Under these conditions, the phosphorus content of rubber seed oil can be reduced to below 3 mg/kg, degumming rate is 91.37%, and the degumming effects are obvious, which also provides some foundation for follow-up studies.

  4. Baseline report - tall upland shrubland at the Rocky Flats Environmental Technology Site

    International Nuclear Information System (INIS)

    1997-03-01

    Rocky Flats Environmental Technology Site (Site) is located on the Colorado Piedmont east of the Front Range between Boulder and Golden. At an elevation of approximately 6,000 feet, the Site contains a unique ecotonal mixture of mountain and prairie plant species, resulting from the topography and close proximity to the mountain front. The Buffer Zone surrounding the Industrial Area is one of the largest remaining undeveloped areas of its kind along the Colorado Piedmont. A number of plant communities at the Site have been identified as increasingly rare and unique by Site ecologists and the Colorado Natural Heritage Program (CNHP). These include the xeric tallgrass prairie, tall upland shrubland, wetlands, and Great Plains riparian woodland communities. Many of these communities support populations of increasingly rare animals as well, including the Preble's meadow jumping mouse, grasshopper sparrow, loggerhead shrike, Merriam's shrew, black crowned night heron, and Hops blue and Argos skipper butterflies. One of the more interesting and important plant communities at the Site is the tall upland shrubland community. It has been generally overlooked by previous Site ecological studies, probably due to its relatively small size; only 34 acres total. Although mentioned in a plant community ordination study conducted by Clark et al. and also in the Site baseline ecological study, few data were available on this plant community before the present study

  5. Baseline report - tall upland shrubland at the Rocky Flats Environmental Technology Site

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Rocky Flats Environmental Technology Site (Site) is located on the Colorado Piedmont east of the Front Range between Boulder and Golden. At an elevation of approximately 6,000 feet, the Site contains a unique ecotonal mixture of mountain and prairie plant species, resulting from the topography and close proximity to the mountain front. The Buffer Zone surrounding the Industrial Area is one of the largest remaining undeveloped areas of its kind along the Colorado Piedmont. A number of plant communities at the Site have been identified as increasingly rare and unique by Site ecologists and the Colorado Natural Heritage Program (CNHP). These include the xeric tallgrass prairie, tall upland shrubland, wetlands, and Great Plains riparian woodland communities. Many of these communities support populations of increasingly rare animals as well, including the Preble`s meadow jumping mouse, grasshopper sparrow, loggerhead shrike, Merriam`s shrew, black crowned night heron, and Hops blue and Argos skipper butterflies. One of the more interesting and important plant communities at the Site is the tall upland shrubland community. It has been generally overlooked by previous Site ecological studies, probably due to its relatively small size; only 34 acres total. Although mentioned in a plant community ordination study conducted by Clark et al. and also in the Site baseline ecological study, few data were available on this plant community before the present study.

  6. Aspects of investment protection in the case of raw material projects; Aspekte des Investitionsschutzes bei Rohstoffprojekten

    Energy Technology Data Exchange (ETDEWEB)

    Wolkewitz, Mathias [Wintershall Holding GmbH, Kassel (Germany). Bereich Recht, Steuern und Versicherungen; TU Clausthal (Germany). Inst. fuer Energierecht

    2011-04-15

    Addressing the question of investment protection currently is of particular importance under the tree aspects: (a) Due to the financial crisis and economic crisis, foreign investment in the years 2008 and 2009 have been drastically reduced; (b) There is a growing critique at the system of international investment protection; (c) For the first time, the Articles 206 and 207 of the Treaty of Lisbon of the European Union show a competence for foreign direct investment. These three aspects seem partly contradictory, but have a considerable changing potential in the area of investment protection. The author of the contribution under consideration describes the tools of investment protection as those are used for raw material projects. Subsequently the author picks out investment protection agreements and deals with some aspects that are important for practical applications in business companies. Raw material projects are projects for the exploration and production of oil and gas in foreign states.

  7. Transcriptome datasets of oil palm pathogen Ganoderma boninense

    Directory of Open Access Journals (Sweden)

    Irene Liza Isaac

    2018-04-01

    Full Text Available Ganoderma boninense is known to be the causal agent for basal stem rot (BSR affecting the oil palm industry worldwide thus cumulating to high economic losses every year. Several reports have shown that a compatible monokaryon pair needs to mate; producing dikaryotic mycelia to initiate the infection towards the oil palm. However, the molecular events occurs during mating process are not well understood. We performed transcriptome sequencing using Illumina RNA-seq technology and de novo assembly of the transcripts from monokaryon, mating junction and dikaryon mycelia of G. boninense. Raw reads from these three libraries were deposited in the NCBI database with accession number SRR1745787, SRR1745773 and SRR1745777, respectively.

  8. Impact of Diets Containing Plant Raw Materials as Fish Meal and Fish Oil Replacement on Rainbow Trout (Oncorhynchus mykiss, Gilthead Sea Bream (Sparus aurata, and Common Carp (Cyprinus carpio Freshness

    Directory of Open Access Journals (Sweden)

    Grigorakis Kriton

    2018-01-01

    Full Text Available The present study aimed to evaluate whether the total or high substitution of fish meal (FM and fish oil (FO by sustainable plant raw materials (plant meal and oils in long-term feeding for rainbow trout, gilthead sea bream, and common carp can result in spoilage alterations during ice storage. These three species were fed throughout their whole rearing cycle with plant-based diets and compared to counterparts that received FM/FO-based diets or commercial-like diets. Sensory QIM schemes adopted for these species and ATP breakdown products (K-value and components were used to evaluate the freshness. Sensory acceptability of 14, 15, and 12 days was found for rainbow trout, gilthead sea bream, and common carp, respectively. This corresponded to K-values of approximately 80%, 35%, and 65% for rainbow trout, gilthead sea bream, and common carp, respectively. No major effect of dietary history on postmortem shelf life was shown for gilthead sea bream and common carp; neither sensory-perceived nor chemical freshness showed diet-related differences. Rainbow trout fed with the plant-based diet exhibited slightly worse sensory freshness than fish fed with FM/FO-based diets, at the end of shelf life. These findings imply that FM and FO can be successfully substituted without major impacts on shelf life of fish.

  9. Pengaruh Konsentrasi Minyak Kelapa Murni (Virgin Coconut Oil dan Minyak Jarak (Castor Oil terhadap Sifat Fisikokimia dan Organoleptik Sabun Mandi Cair

    Directory of Open Access Journals (Sweden)

    Asri Widyasanti

    2017-04-01

    Full Text Available VCO contains of lauric acid that perform to smooth and to moisturize the skin. Castor oil has ricinoleic acid that serves to protect the skin. Therefore, both of the oil are suitable to be the raw material for liquid soap making. This study aimed were to produce a liquid soap, to determine the exact concentration of VCO and castor oil for liquid soap and to find out the effect of VCO and Castor Oil concentrations to the characteristics of liquid soap. The method used was laboratory experimental method with descriptive analysis. The treatments in this study were A =concentrations of VCO 100 %, B = concentrations of VCO 80 % and castor oil 20 %, C = concentrations of VCO 50 % and castor oil 50 %, D = concentrations of VCO 20 % and castor oil 80 %, and E = concentrations of castor oil 100 %,  from 200 gram soap base. The parameter observed for liquid soap included chemical properties, physical properties of soap, and organoleptic test. The result shows that all treatments complies the requirement SNI 06-4085-1996. The formula of liquid soap with treatment B was revealed as the best product with 0.01 % of total alkali content, pH value of 9.16 , specific gravity 1.06, and total plate count 5colonies/g. This technology process of natural liquid soap production with the VCO and castor oil could be develop and apply in industrial scale.

  10. Essentials of water systems design in the oil, gas, and chemical processing industries

    CERN Document Server

    Bahadori, Alireza; Boyd, Bill

    2013-01-01

    Essentials of Water Systems Design in the Oil, Gas and Chemical Processing Industries provides valuable insight for decision makers by outlining key technical considerations and requirements of four critical systems in industrial processing plants—water treatment systems, raw water and plant water systems, cooling water distribution and return systems, and fire water distribution and storage facilities. The authors identify the key technical issues and minimum requirements related to the process design and selection of various water supply systems used in the oil, gas, and chemical processing industries. This book is an ideal, multidisciplinary work for mechanical engineers, environmental scientists, and oil and gas process engineers.

  11. Control Analysis Of Tobacco Raw Material Supplies Using Eoq Method Economic Order Quantity To Reach Efficiency Total Costs Of Raw Material In Pr. Sukun

    Directory of Open Access Journals (Sweden)

    Wiwik Sudarwati

    2017-07-01

    Full Text Available The raw material inventory control system determines and guarantees the availability of raw material stock in the right quantity quality and timing. The problem in this research is the procurement of raw materials of tobacco. PR. Sukun still often experiences the excess. This is related to the frequency of raw material purchases and the quantity of raw material purchases which can lead to waste of working capital embedded in raw material inventory raw material ordering costs and raw material storage costs. The purpose of this research is to know how to make an efficiency level in procurement of raw material inventory between EOQ method compared with policy of PR. Sukun. The type of research used is analytic descriptive type. Data analysis begins by analyzing raw material quantity comparison total raw material inventory cost and raw material cost between PR Sukun policy with EOQ method. Based on the results of research known that by using EOQ method can be much more efficient compared to policy of PR. Sukun. The quantity and frequency of purchasing raw materials is less but still take into account the safety stock and reorder point so the production process is not disturbed. In addition the cost of purchasing ordering costs and raw materials storage costs less so as to create efficiencies on the cost of raw materials inventory. PR. Sukun in the procurement of raw material inventory should use EOQ method to be more efficient and take into account the safety stock and reorder point to avoid the inventory excess of raw materials.

  12. Chitosan-edible oil based materials as upgraded adsorbents for textile dyes.

    Science.gov (United States)

    Dos Santos, Clayane Carvalho; Mouta, Rodolpho; Junior, Manoel Carvalho Castro; Santana, Sirlane Aparecida Abreu; Silva, Hildo Antonio Dos Santos; Bezerra, Cícero Wellington Brito

    2018-01-15

    Biopolymer chitosan is a low cost, abundant, environmentally friendly, very selective and efficient anionic dyes adsorbent, being a promising material for large-scale removal of dyes from wastewater. However, raw chitosan (CS) is an ineffective cationic dyes adsorbent and its performance is pH sensitive, thus, CS modifications that address these issues need to be developed. Here, we report the preparation and characterization of two new CS modifications using edible oils (soybean oil or babassu oil), and their adsorption performance for two dyes, one anionic (remazol red, RR) and one cationic (methylene blue, MB). Both modifications extended the pH range of RR adsorption. The babassu oil modification increased adsorption capacity of the cationic dye MB, whereas the soybean oil modification increased that of RR. Such improvements demonstrate the potential of these two new CS modifications as adsorbent candidates for controlling dyes pollution in effluents. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Bio-Oil Deployment in the Home Heating Market

    Energy Technology Data Exchange (ETDEWEB)

    Butcher, T. A. [Brookhaven National Lab. (BNL), Upton, NY (United States); Trojanowski, R. [Brookhaven National Lab. (BNL), Upton, NY (United States); Mante, O. [Brookhaven National Lab. (BNL), Upton, NY (United States); Wei, G. [Brookhaven National Lab. (BNL), Upton, NY (United States); Celebi, Y. [Brookhaven National Lab. (BNL), Upton, NY (United States); Huber, J. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2016-07-01

    Distillate fuel oil is used in many stationary heating applications, predominantly in the Northeastern part of the United States. Total estimated non-transportation distillate use in 2014 was estimated to be 10.9 billion gallons. This study has focused on potentially displacing part of this petroleum use with biofuel derived from woody biomass. The fuel production route considered is pyrolysis which creates a liquid fuel high in oxygen, organic acids, and water. While this fuel can be used in stationary applications without significant further processing, to do so would require significant upgrades in current heating equipment. Alternatively this raw pyrolysis oil can be upgraded through catalytic hydrogenation to produce a bio-oil with near-negligible oxygen, water, and acidity. The focus of this work has been exploration of such upgraded fuels. The quality of upgraded fuels is affected by process conditions and there is a cost /quality tradeoff.

  14. Production, properties and utilisation of pyrolysis oil

    Energy Technology Data Exchange (ETDEWEB)

    Sipilae, K; Oasmaa, A; Arpiainen, V; Solantausta, Y; Leppaemaeki, E; Kuoppala, E; Levander, J; Kleemola, J; Saarimaeki, P [VTT Energy, Jyvaeskylae (Finland). Energy Production Technologies

    1997-12-01

    In this project VTT Energy co-ordinates the EU JOULE Project `Biofuel oil for power plants and boilers` supporting the development projects of Finnish enterprises, and participates in the Pyrolysis Project of IEA Bioenergy Agreement. Presently two pyrolysis devices with capacities of 150 g/h and 1 kg/h are used for the project. Hot gas filtering tests by using one ceramic candle equipment have been carried out with the 1 kg/h device for pyrolysis oil. The solids and alkali contents of the product oil were reduced clearly. Suitable conditions are being defined for continuous hot gas filtering. A PDU device of 20 kg/h is being commissioned. The main aim of the chemical characterisation of pyrolysis oil was to develop as simple a method as possible for differentiating pyrolysis oils and for finding correlations between the characteristics and behaviour of pyrolysis oils. Pyrolysis oils produced from various raw materials (hardwood, pine, straw) were analysed and compared with each other. VTT Energy participates in the pyrolysis network (EU/PYNE) of EU, the aim of which is to collect and disseminate research results of pyrolysis studies, i.e., through a journal with a wide circulation. VTT also participates in the pyrolysis activity of IEA (PYRA), the other partners being Great Britain, EU, Canada and the United States. I.e., quality criteria and improvement, occupational safety and pyrolysis kinetics are discussed in IEA/PYRA

  15. Greenhouse gas measurements from a UK network of tall towers: technical description and first results

    Science.gov (United States)

    Stanley, Kieran M.; Grant, Aoife; O'Doherty, Simon; Young, Dickon; Manning, Alistair J.; Stavert, Ann R.; Spain, T. Gerard; Salameh, Peter K.; Harth, Christina M.; Simmonds, Peter G.; Sturges, William T.; Oram, David E.; Derwent, Richard G.

    2018-03-01

    A network of three tall tower measurement stations was set up in 2012 across the United Kingdom to expand measurements made at the long-term background northern hemispheric site, Mace Head, Ireland. Reliable and precise in situ greenhouse gas (GHG) analysis systems were developed and deployed at three sites in the UK with automated instrumentation measuring a suite of GHGs. The UK Deriving Emissions linked to Climate Change (UK DECC) network uses tall (165-230 m) open-lattice telecommunications towers, which provide a convenient platform for boundary layer trace gas sampling. In this paper we describe the automated measurement system and first results from the UK DECC network for CO2, CH4, N2O, SF6, CO and H2. CO2 and CH4 are measured at all of the UK DECC sites by cavity ring-down spectroscopy (CRDS) with multiple inlet heights at two of the three tall tower sites to assess for boundary layer stratification. The short-term precisions (1σ on 1 min means) of CRDS measurements at background mole fractions for January 2012 to September 2015 is sampling temperatures. Automated alerts are generated and emailed to site operators when instrumental parameters are not within defined set ranges. Automated instrument shutdowns occur for critical errors such as carrier gas flow rate deviations. Results from the network give good spatial and temporal coverage of atmospheric mixing ratios within the UK since early 2012. Results also show that all measured GHGs are increasing in mole fraction over the selected reporting period and, except for SF6, exhibit a seasonal trend. CO2 and CH4 also show strong diurnal cycles, with night-time maxima and daytime minima in mole fractions.

  16. SAR Raw Data Generation for Complex Airport Scenes

    Directory of Open Access Journals (Sweden)

    Jia Li

    2014-10-01

    Full Text Available The method of generating the SAR raw data of complex airport scenes is studied in this paper. A formulation of the SAR raw signal model of airport scenes is given. Via generating the echoes from the background, aircrafts and buildings, respectively, the SAR raw data of the unified SAR imaging geometry is obtained from their vector additions. The multipath scattering and the shadowing between the background and different ground covers of standing airplanes and buildings are analyzed. Based on the scattering characteristics, coupling scattering models and SAR raw data models of different targets are given, respectively. A procedure is given to generate the SAR raw data of airport scenes. The SAR images from the simulated raw data demonstrate the validity of the proposed method.

  17. Petrochema looks for oil

    International Nuclear Information System (INIS)

    Beer, G.

    2006-01-01

    Petrochema Dubova has announced mass redundancies. The company managers, however, keep stressing that this does not mean the end of this Central Slovak refinery. Company management is searching intensely for low-sulphur oil that would help to bring back life to their fractionating column and start up production of light fuels and oils. The company has not used its equipment to produce products directly from oil for over two years. It used to specialise in the sale of oil products it purchased from other producers. About three months ago, the ownership of Petrochema changed once again. Petroinvest Bratislava became the new 100-percent owner of the company. It invested 35 mil. Sk (945-thousand EUR) in Petrochema's registered capital. The new owner has relations with people who used to cooperate with the Slovak investment group, Istrokapital. They bought Petrochema from the Czech company, Annectis. The new owners are talking about restructuring. 'We have not entered into any agreements on the purchase of oil as we did not know what the technical condition of the refinery was. Currently, we are looking for oil that meets the technological parameters of the technology used at Dubova,' said a member of the supervisory board of Petrochema, Miroslav Remeta. It is quite difficult to purchase oil for the company as the technology used for processing dates back to the first half of the last century. It requires low-sulphur oil with minimum paraffin content. In the past, the most suitable raw material used to come from Nafta Gbely. Later, the company started cooperation with Kazakhstan. 'We have to find a long-term partner to make the operation of the fractionating column profitable,' said M. Remeta. The company can process about 12-thousand tons a month. That is about 12 trainloads. In order to launch production it needs to have enough supply to cover for unreliable deliveries from unpredictable countries. 'Funds for the purchase of the oil are available from private sources

  18. Optimization of the recycle used oil and its fuel quality characterization

    Directory of Open Access Journals (Sweden)

    Eyitayo A. AFOLABI

    2016-06-01

    Full Text Available The optimization of recycling of used engine oil with clay sample has been studied using Response Surface Methodology. Acid concentration, activation temperature and time were the independent variables considered in optimizing the recycling of used oil and six responses evaluated. The surface characterization of the clay samples was performed using the Fourier Transform Infrared (FTIR spectra and Brunauer Emmett Teller (BET analyses. The relationship between independent variables and response was described by a second order polynomial equation. Statistical testing of the model was performed with F-test to obtain the correlation between the experimental data and predicted results for all responses. The adequacy of the model equations were evaluated by the Adjusted and Predicted R2 coefficients observed to be close to each other for all the six responses. Data obtained from recycling used oil using clay sample showed the optimum condition as; activation temperature of 106.80oC, acid concentration of 3M and activation time of 180 minutes. A yield of 66.28% was obtained at optimum condition and characterized fuel qualities found close to fresh oil used as standard in this work. The surface area and adsorption capacity of raw clay and activated clay samples was observed to have increase from 19.8m2/g to 437.83m2/g and 1.41 mg/g to 8.64 mg/g respectively. This difference adequately described the improvement of the adsorption phenomena of the activated clay over raw clay samples.

  19. O óleo de abacate (Persea americana Mill como matéria-prima para a indústria alimentícia The avocado oil (Persea americana Mill as a raw material for the food industry

    Directory of Open Access Journals (Sweden)

    Jocelem Mastrodi Salgado

    2008-12-01

    excellent raw material for the food industry. Besides, the fatty acid composition and the sterols presents in the avocado oil are similar to the olive oil. Thus, the avocado oil can substitute the soybean oil, or it can be mixed with the olive oil offering the Brazilian consumers a product of high quality and low cost.

  20. Expansion of deciduous tall shrubs but not evergreen dwarf shrubs inhibited by reindeer in Scandes mountain range.

    Science.gov (United States)

    Vowles, Tage; Gunnarsson, Bengt; Molau, Ulf; Hickler, Thomas; Klemedtsson, Leif; Björk, Robert G

    2017-11-01

    One of the most palpable effects of warming in Arctic ecosystems is shrub expansion above the tree line. However, previous studies have found that reindeer can influence plant community responses to warming and inhibit shrubification of the tundra.We revisited grazed (ambient) and ungrazed study plots (exclosures), at the southern as well as the northern limits of the Swedish alpine region, to study long-term grazing effects and vegetation changes in response to increasing temperatures between 1995 and 2011, in two vegetation types (shrub heath and mountain birch forest).In the field layer at the shrub heath sites, evergreen dwarf shrubs had increased in cover from 26% to 49% but were unaffected by grazing. Deciduous dwarf and tall shrubs also showed significant, though smaller, increases over time. At the birch forest sites, the increase was similar for evergreen dwarf shrubs (20-48%) but deciduous tall shrubs did not show the same consistent increase over time as in the shrub heath.The cover and height of the shrub layer were significantly greater in exclosures at the shrub heath sites, but no significant treatment effects were found on species richness or diversity.July soil temperatures and growing season thawing degree days (TDD) were higher in exclosures at all but one site, and there was a significant negative correlation between mean shrub layer height and soil TDD at the shrub heath sites. Synthesis . This study shows that shrub expansion is occurring rapidly in the Scandes mountain range, both above and below the tree line. Tall, deciduous shrubs had benefitted significantly from grazing exclosure, both in terms of cover and height, which in turn lowered summer soil temperatures. However, the overriding vegetation shift across our sites was the striking increase in evergreen dwarf shrubs, which were not influenced by grazing. As the effects of an increase in evergreen dwarf shrubs and more recalcitrant plant litter may to some degree counteract some of

  1. In vitro antimicrobial effect of Satureja wiedemanniana against Bacillus species isolated from raw meat samples.

    Science.gov (United States)

    Yucel, Nihal; Aslim, Belma; Ozdoğan, Hakan

    2009-08-01

    In this study a total of 30 raw meat samples obtained from Ankara, Turkey were screened for the presence of Bacillus species. Among the meat samples analyzed, the predominant species isolated was Bacillus circulans; other Bacillus species were identified as Bacillus firmus, Bacillus lentus, Bacillus megaterium, Bacillus licheniformis, Bacillus mycoides, Bacillus sphaericus, and Bacillus cereus. Minced meat samples were more contaminated with Bacillus species than sliced beef sample. From these samples, 242 Bacillus species isolates were obtained, which were investigated for proteolytic and lipolytic activity, associated with meat spoilage. Interestingly, some Bacillus strains produced the highest values of proteolytic/lipolytic activities. Nineteen Bacillus strains were selected among the 242 isolates according to their proteolytic/lipolytic activity with a clear zone diameter of > or =6 mm. The essential oil of Satureja wiedemanniana (Lalem) Velen was also tested against these 19 Bacillus species that had proteolytic and lipolytic activity. The essential oil yield obtained from the aerial parts of the plant was 0.35% (vol/wt). The inhibition zones of the essential oil obtained against all the Bacillus species were in the range of 5.0-12.0 mm. The oil showed high antimicrobial activities against B. licheniformis M 6(26), M 11(16), and M 12(1) strains. B. licheniformis 12(1) showed high lipolytic activity (18.0 mm). Also, B. licheniformis M 6(26) and M 11(16) showed high proteolytic activity (16.0 and 14.0 mm). These results may suggest that an essential oil of S. wiedemanniana can be used as a natural preservative in meat against spoilage bacteria.

  2. Lead Accumulation by Tall Fescue (Festuca arundinacea Schreb. Grown on a Lead-Contaminated Soil

    Directory of Open Access Journals (Sweden)

    D. Gilliard

    2005-08-01

    Full Text Available Phytoextraction is gaining acceptance as a cost-effective and environmentally friendly phytoremediation strategy for reducing toxic metal levels from contaminated soils. Cognizant of the potential of this phytoremediation technique as an alternative to expensive engineering-based remediation technologies, experiments were conducted to evaluate the suitability of some plants as phytoextraction species. From one of our preliminary studies, we found that tall fescue (Festuca arundinacea Schreb. cv. Spirit can tolerate and accumulate significant amounts of lead (Pb in its shoots when grown in Pb-amended sand. To further evaluate the suitability of tall fescue as one of the potential crop rotation species for phytoextraction, a study was conducted to determine whether the addition of ethylenediaminetetraacetic acid (EDTA alone or in combination with acetic acid can further enhance the shoot uptake of Pb. Seeds were planted in 3.8 L plastic pots containing top soil, peat, and sand (4:2:1, v:v:v spiked with various levels (0,1000, 2000 mg Pb/kg dry soil of lead. At six weeks after planting, aqueous solutions (0, 5 mmol/kg dry soil of EDTA and acetic acid (5 mmol/kg dry soil were applied to the root zone, and all plants were harvested a week later. Results revealed that tall fescue was relatively tolerant to moderate levels of Pb as shown by non-significant differences in root and shoot biomass among treatments. An exception to this trend however, was the slight reduction in root and shoot biomass of plants exposed to the highest Pb level in combination with the two chelates. Root Pb concentration increased with increasing level of soil-applied Pb. Further increases in root Pb concentrations were attributed to chelate amendments. Translocation index, which is a measure of the partitioning of the metal to the shoots, was significantly enhanced with chelate addition especially when both EDTA and acetic acid were used. Chelate-induced increases in

  3. Raw materials policy: implications for Germany

    Energy Technology Data Exchange (ETDEWEB)

    Gaertner, E

    1978-04-01

    The contribution characterizes the situation of the national mining industry in 1977, deals with international raw materials policies within the framework of the North-South dialogue and with the policies of the western industrial countries, points out the dangers of worldwide state-controlled raw materials policies and calls for a) the political risk of enterprise cooperation with developing countries to be covered and b) double taxation to be avoided. Finally, the problems of securing the Federal Republic of Germany's raw materials supplies on a long-term basis are portrayed.

  4. Preparation of furfural from local waste agricultural products and its use to refine lube oils

    Energy Technology Data Exchange (ETDEWEB)

    Marei, A.

    1971-01-01

    This article discusses the evaluation of some United Arab Republic waste agricultural products as raw materials for the production of furfural. Batch scale preparations from corn cobs and bagasse were carried out and the furfural produced was used to extract aromatics from two waxy oil distillates. The effect of variations in extraction temperature, solvent, and addition of water to the solvent was studied. High grade lube oils were obtained by this technique. Data and tables are provided.

  5. Are tall trees more sensitive to prolonged drought in tropical per-humid forests?

    Science.gov (United States)

    Schuldt, Bernhard; Horna, Viviana; Leuschner, Christoph

    2010-05-01

    Seasonality of water flux was investigated for common tree species of a Central Sulawesi pre-montane perhumid forest located in the Lore Lindu National Park. Trees were exposed to reduced soil water levels under a rainfall exclusion experiment (Sulawesi Throughfall Displacement Experiment, STD), to simulate drought effects and to monitor species-specific short-term responses to extended water stress. Several climate scenarios predict more frequent occurrence of ENSO droughts with increasing severity induced by global warming. Detailed assessments of the ecological consequences of droughts in perhumid forests are scarce and knowledge whether and how these ecosystems are adapted to severe droughts is limited. Key research questions were: (1) how do tall rainforest trees cope with long pathways under low evaporative demand, (2) how sensitive are trees from tropical perhumid forests and how do they acclimate to drought-stress and 3) does wood density determine the drought sensitivity of perhumid forest trees? From June 2007 until October 2009 we monitored 95 trees from 8 common tree species. Half of them were located under the STD Experiment and the other half in control areas. We used the constant heated method to continuously monitor stem xylem flux density and conduct parallel measurements of xylem anatomy and hydraulic conductivity in twigs, stems and roots. After almost 22 months of experimental drought only 25% of xylem flux density reduction was observed in the experimental trees. But the reaction to water stress was species-specific and in some species xylem flux went down to 50 % compared to the individuals located at the control plots. Wood density did not correlate with any hydraulic measurement, but anatomy and hydraulic architecture observations showed a positive correlation between xylem conductivity and vessel size with tree height. These results reveal a well adapted hydraulic system of tall canopy trees allowing for highly efficient water flow under

  6. Quality and Sensorial Characteristics of Raw-Vegan Bars

    Directory of Open Access Journals (Sweden)

    Liana Claudia Salanţă

    2015-11-01

    Full Text Available Increased consumer interest in healthier food products is driven by a variety of factors including growing awareness of the link between diet and health, the desire to age ‘gracefully’ by maintaining good health, greater convenience in meeting nutritional needs and preventing chronic diseases. In raw food diet, food is consumed predominantly or exclusively as uncooked and unprocessed raw food; the main components of the diet are fruits, nuts, seeds, and sprouted grains and beans. The aim of this study was to obtain two raw-vegan bars using dry raw materials and to establish the physicochemical and sensory characteristics of the products. Raw-vegan bars were formulated using fruits and seeds (cranberries, figs, raisins, raspberries, cashew, chia seeds, etc. and binding agents (honey. Raw-vegan bars stands out among fast foods due to their balanced nutritional content and convenience.  

  7. Study of wind-induced vibrations in tall buildings with tuned mass dampers taking into account vortices effects

    Science.gov (United States)

    Momtaz, Ali Ajilian; Abdollahian, Mohamadreza Akhavan; Farshidianfar, Anooshiravan

    2017-12-01

    In recent years, construction of tall buildings has been of great interest. Use of lightweight materials in such structures reduces stiffness and damping, making the building more influenced by wind loads. Moreover, tall buildings of more than 30 to 40 stories, depending on the geographical location, the wind effects are more influential than earthquakes. In addition, the complexity of the effects of wind flow on the structure due to the interaction of the fluid flow and solid body results in serious damages to the structure by eliminating them. Considering the importance of the issue, the present study investigates the phenomenon of wind-induced vibration on high-rise buildings, taking into account the effects of vortices created by the fluid flow and the control of this phenomenon. To this end, the governing equations of the structure, the fluid flow and the tuned mass damper (TMD) are first introduced, and their coefficient values are extracted according to the characteristics of ACT skyscraper in Japan. Then, these three coupled equations are solved using a program coded in MATLAB. After validation of the results, the effects of wind loads are analyzed and considered with regard to the effects of vortices and the use of TMD, and are compared with the results of the state where no vortices are considered. Generally, the results of this study point out the significance of vibrations caused by vortices in construction of engineering structures as well as the appropriate performance of a TMD in reducing oscillations in tall buildings.

  8. Exogenous Application of Citric Acid Ameliorates the Adverse Effect of Heat Stress in Tall Fescue (Lolium arundinaceum)

    Science.gov (United States)

    Hu, Longxing; Zhang, Zhifei; Xiang, Zuoxiang; Yang, Zhijian

    2016-01-01

    Citric acid may be involved in plant response to high temperature. The objective of this study was to investigate whether exogenous citric acid could improve heat tolerance in a cool-season turfgrass species, tall fescue (Lolium arundinaceum), and to determine the physiological mechanisms of citric acid effects on heat stress tolerance. The grasses were subjected to four citric acid levels (0, 0.2, 2, and 20 mM) and two temperature levels (25/20 and 35/30 ± 0.5°C, day/night) treatments in growth chambers. Heat stress increased an electrolyte leakage (EL) and malonaldehyde (MDA) content, while reduced plant growth, chlorophyll (Chl) content, photochemical efficiency (Fv/Fm), root activity and antioxidant enzyme activities (superoxide dismutase, SOD; catalase, CAT; peroxidase, POD). External citric acid alleviated the detrimental effects of heat stress on tall fescue, which was evidenced by decreased EL and MDA content, and improved plant growth under stress conditions. Additionally, the reduction in Chl content, Fv/Fm, SOD, POD, CAT and root activity were ameliorated in citric acid treated plants under heat stressed conditions. High temperature induced the expression of heat shock protein (HSP) genes, which exhibited greater expression levels after citric acid treatment under heat stress. These results suggest that exogenous citric acid application may alleviate growth and physiological damage caused by high temperature. In addition, the exogenously applied citric acid might be responsible for maintaining membrane stability, root activity, and activation of antioxidant response and HSP genes which could contribute to the protective roles of citric acid in tall fescue responses to heat stress. PMID:26925085

  9. Exogenous Application of Citric Acid Ameliorates the Adverse Effect of Heat Stress in Tall Fescue (Lolium arundinaceum).

    Science.gov (United States)

    Hu, Longxing; Zhang, Zhifei; Xiang, Zuoxiang; Yang, Zhijian

    2016-01-01

    Citric acid may be involved in plant response to high temperature. The objective of this study was to investigate whether exogenous citric acid could improve heat tolerance in a cool-season turfgrass species, tall fescue (Lolium arundinaceum), and to determine the physiological mechanisms of citric acid effects on heat stress tolerance. The grasses were subjected to four citric acid levels (0, 0.2, 2, and 20 mM) and two temperature levels (25/20 and 35/30 ± 0.5°C, day/night) treatments in growth chambers. Heat stress increased an electrolyte leakage (EL) and malonaldehyde (MDA) content, while reduced plant growth, chlorophyll (Chl) content, photochemical efficiency (Fv/Fm), root activity and antioxidant enzyme activities (superoxide dismutase, SOD; catalase, CAT; peroxidase, POD). External citric acid alleviated the detrimental effects of heat stress on tall fescue, which was evidenced by decreased EL and MDA content, and improved plant growth under stress conditions. Additionally, the reduction in Chl content, Fv/Fm, SOD, POD, CAT and root activity were ameliorated in citric acid treated plants under heat stressed conditions. High temperature induced the expression of heat shock protein (HSP) genes, which exhibited greater expression levels after citric acid treatment under heat stress. These results suggest that exogenous citric acid application may alleviate growth and physiological damage caused by high temperature. In addition, the exogenously applied citric acid might be responsible for maintaining membrane stability, root activity, and activation of antioxidant response and HSP genes which could contribute to the protective roles of citric acid in tall fescue responses to heat stress.

  10. Exogenous Application of Citric Acid Ameliorates the Adverse Effect of Heat Stress in Tall Fescue (Festuca arundinacea

    Directory of Open Access Journals (Sweden)

    Longxing eHu

    2016-02-01

    Full Text Available Citric acid may be involved in plant response to high temperature. The objective of this study was to investigate whether exogenous citric acid could improve heat tolerance in a cool‐season turfgrass species, tall fescue (Lolium arundinaceum, and to determine the physiological mechanisms of citric acid effects on heat stress tolerance. The grasses were subjected to four citric acid levels (0, 0.2, 2 and 20 mM and two temperature levels (25/20 and 35/30 ± 0.5 ̊C, day/night treatments in growth chambers. Heat stress increased an electrolyte leakage (EL and malonaldehyde (MDA content, while reduced plant growth, chlorophyll (Chl content, photochemical efficiency (Fv/Fm, root activity and antioxidant enzyme activities (superoxide dismutase, SOD; catalase, CAT; peroxidase, POD. External citric acid alleviated the detrimental effects of heat stress on tall fescue, which was evidenced by decreased EL and MDA content, and improved plant growth under stress conditions. Additionally, the reduction in Chl content, Fv/Fm, SOD, POD, CAT and root activity were ameliorated in citric acid treated plants under heat stressed conditions. High temperature induced the expression of heat shock protein (HSP genes, which exhibited greater expression levels after citric acid treatment under heat stress. These results suggest that exogenous citric acid application may alleviate growth and physiological damage caused by high temperature. In addition, the exogenously applied citric acid might be responsible for maintaining membrane stability, root activity, and activation of antioxidant response and HSP genes which could contribute to the protective roles of citric acid in tall fescue responses to heat stress.

  11. Isolation of Burkholderia cepacia JB12 from lead- and cadmium-contaminated soil and its potential in promoting phytoremediation with tall fescue and red clover.

    Science.gov (United States)

    Jin, Zhong Min; Sha, Wei; Zhang, Yan Fu; Zhao, Jing; Ji, Hongyang

    2013-07-01

    Phytoremediation combined with suitable microorganisms and biodegradable chelating agents can be a means of reclaiming lands contaminated by toxic heavy metals. We investigated the ability of a lead- and cadmium-resistant bacterial strain (JB12) and the biodegradable chelator ethylenediamine-N,N'-disuccinic acid (EDDS) to improve absorption of these metals from soil by tall fescue and red clover. Strain JB12 was isolated from contaminated soil samples, analysed for lead and cadmium resistance, and identified as Burkholderia cepacia. Tall fescue and red clover were grown in pots to which we added JB12, (S,S)-EDDS, combined JB12 and EDDS, or water only. Compared with untreated plants, the biomass of plants treated with JB12 was significantly increased. Concentrations of lead and cadmium in JB12-treated plants increased significantly, with few exceptions. Plants treated with EDDS responded variably, but in those treated with combined EDDS and JB12, heavy metal concentrations increased significantly in tall fescue and in the aboveground parts of red clover. We conclude that JB12 is resistant to lead and cadmium. Its application to the soil improved the net uptake of these heavy metals by experimental plants. The potential for viable phytoremediation of lead- and cadmium-polluted soils with tall fescue and red clover combined with JB12 was further enhanced by the addition of EDDS.

  12. The hidden carbon liability of Indonesian palm oil

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-05-15

    This report highlights the urgent need for global palm oil consumers and investors to support Unilever's call for an immediate moratorium on deforestation and peatland clearance in Indonesia. This report focuses on Unilever, which shares major institutional investors with other leading corporations including Nestle, Procter and Gamble and Kraft. Not only do these corporations share investors, they also share growing carbon liability within their raw material supply chains through the expansion in the palm oil sector in Indonesia. Unilever has recognised the global problems associated with palm oil expansion and the need for drastic reform to this sector. Unilever has taken a bold move in calling for an immediate moratorium on deforestation and peatland clearance. While Unilever's position is strengthened by its status as the largest palm oil consumer in the world, this report shows how, unless companies like Nestle, Procter and Gamble and Kraft support its call for a halt to deforestation, the palm oil industry will continue to present a massive carbon liability over the coming years. This report uses Unilever's palm oil supply chains as a case study to help quantify the carbon liability and collateral risks associated with the Indonesian palm oil sector. It shows how, by buying palm oil from suppliers who account for more than one-third of Indonesia's palm oil production, Unilever and its competitors are increasing their potential carbon liability and thus leaving investors exposed to potentially significant levels of hidden risk, compromising long-term financial and brand stability.

  13. Nutritional value of raw soybeans, extruded soybeans, roasted soybeans and tallow as fat sources in early lactating dairy cows

    Directory of Open Access Journals (Sweden)

    A. Moosavi

    2012-09-01

    Full Text Available Thirty multiparous Holstein cows (29.8 ± 4.01days in milk; 671.6 ± 31.47 kg of body weight were used in a completely randomized design to compare nutritional value of four fat sources including tallow, raw soybeans, extruded soybeans and roasted soybeans for 8 weeks. Experimental diets were a control containing 27.4 % alfalfa silage, 22.5% corn silage, and 50.1% concentrate, and four diets with either tallow, raw soybean, extruded soybean, or roasted soybean added to provide 1.93% supplemental fat. Dry matter and NEL intakes were similar among treatments, while cows fed fat diets had significantly (P<0.05 high NEL intakes when compared to control with no fat. Supplemental fat, whether tallow or full fat soybeans increased milk production (1.89-2.45 kg/d; P<0.01 and FCM production (1.05-2.79; P<0.01. Milk fat yield and percentage of cows fed fat-supplemented diets were significantly (P<0.01 and P<0.05 respectively higher than control. Between fat-supplemented diets, roasted soybean caused highest milk fat yield and extruded soybean caused lowest milk fat yield. There was no significant effect of supplemental fat on the milk protein and lactose content and yield. Feed efficiency of fat-supplemented diets was significantly (P<0.01 higher than control. Body weight, body weight change and BCS (body condition score of cows, as well as energy balance and energy efficiency were similar between treatments. In conclusion, while there was no significant effect of fat sources on production response of cows, fat originating from heat-treated soybean help to minimize imported RUP (rumen undegradable protein sources level as fish meal in comparison with tallow and raw soybean oil. In the Current study, there was no statistical significance among nutritional values of oil from extruded soybeans and roasted soybeans.

  14. Prospects of using the new technologies in oil and gas industry of Kazakhstan

    International Nuclear Information System (INIS)

    Nadirov, N.K.

    1999-01-01

    The Republic of Kazakstan is one of the great petroleum producers in the world. Present day, according to the supply of hydrocarbon raw the country takes 13-Th place in the world, but some facts say that Kazakhstan will takes 6-7 places in near future. In 1999 Kazakhstan will broadly celebrated the 100 jubilee of its petroleum and gas industries. A century ago in April the first key well no. 7 gave a gusher in Karachungul deposit, Zhyloi region, in Aturau, at the depth of 40 meters with daily debit of 20-25 tonnes. The key well belongs to the Petersburg businessman's company, to A.Grum-Grzhimailo, Leman and Deppelmayer. The industrial petroleum extraction began in 1911. In 1998 26.5 million tonnes of raw have been produced. It is expected that that petroleum extraction volume will tripled at the account of Pricaspian oil field. A large portion of petroleum is exported. The output of all 3 refinery plants in Kazakhstan (Atyrau, Pavlodar and Shymkent) does not exceed 18 million tonnes of petroleum per year. There is a problem regarding the increase of oil refining depth, raising the produced products quality and their assortment expansion. No plant produces lubricating oils. The new technologies and much investments are required to solve these problems. (author)

  15. Survey of ABC transporter and metallothionein genes expressions in tall fescue inoculated with Funneliformis intraradices under Nickel toxicity

    Directory of Open Access Journals (Sweden)

    Massomeh Rafiei-Demneh

    2016-09-01

    Full Text Available In plants, there are complex network of transport, chelation, and sequestration processes that functions in maintaining concentrations of essential metal ions in different cellular compartments, thus minimizing the damage caused by entry of non-essential metal ions into the cytosol. In the presence of toxic ones, arbuscular mycorrhizal (AM fungi are able to alleviate metal toxicity in the plant. In this study the effect of an arbuscular mycorrhizal fungi Funneliformis intraradices on growth, Nickel tolerance, and ABC transporter and metallothionein expression in leaves and roots of tall fescue (Festuca arundinacea plants cultivated in Ni polluted soil were evaluated. The fungi infected (M+ and uninfected (M- fescue plants were cultivated in soil under different Ni concentrations (0, 30, 90 and 180 ppm for 3 months. Results demonstrated the positive effect of fungi colonization on the increase in growth and reduction in Ni uptake (90 and 180 ppm and Ni translocation from roots to shoot of tall fescue under Ni stress. The results also demonstrated that the level of ABC transporterand metallothionein transcripts accumulation in roots was considerably higher for both M- and M+ plants compared to the control. Also, M+ plants showed less ABC and MET expression compared to the M- plants. These results demonstrated the importance of mycorrhizal colonization of F. intraradices in reduction of Ni transport from root to shoot of tall fescue which alleviates Ni-induced stress.

  16. Physical Basis for Creating Energy and Resource-Saving Rheo-Technology in Oil Production

    Directory of Open Access Journals (Sweden)

    Emin A. Panakhov

    2009-10-01

    Full Text Available In a previous paper we presented the results of our investigations on the application of externally imposed temperature fields for the improvement of the non-Newtonian properties of raw oil in the well and also on the possible use of electric and magnetic fields in the water flooding process of the oil layer. In this article, some additional results are presented with regards to the application of external pressure fields to the same purpose, with the goal of increasing the well output and improve the efficiency of gaslift wells and oil pipelines. The possibility of regulating the gas-liquid system saturation pressure is discussed as well, to expand the opportunity of varying the well operating regime.

  17. Extruded linseed and linseed oil as alternative to soybean meal and soybean oil in diets for fattening lambs

    Directory of Open Access Journals (Sweden)

    Anna Caputi Jambrenghi

    2010-01-01

    Full Text Available The study evaluated the effects of replacing soybean meal and soybean oil respectively with extruded linseed and linseed oil on the productive performances and meat quality traits in lambs slaughtered at 90 days. Lambs weaned at 40 days were divided into 3 groups (N.=10 fed ad libitum for 6 weeks as follows: C (control, commercial feed containing soybean meal and soybean oil; LO (feed containing linseed oil instead of soybean oil; EL (feed containing extruded linseed. Meat quality traits were evaluated on the Longissimus lumborum (Ll and Semimembranosus (Sm muscles. The lambs’ growth performances and the slaughtering and sectioning data did not differ between groups. The redness of meat was significantly higher (P<0.05 for the LO and EL groups compared to the control for both the muscles tested. Ll meat samples of the EL group showed a greater cooking loss compared to LO (P<0.01 and to the control (P<0.05. The amount of linoleic acid in raw Ll meat samples was significantly (P<0.01 lower in both LO and EL groups with respect to control. The concentration of α-linolenic acid was significantly (P<0.01 higher in the EL group and this positively affected the total content of ω3 as well as the ω6/ω3 ratio.

  18. Survey to determine why people drink raw milk.

    Science.gov (United States)

    Mullin, Gerard E; Belkoff, Stephen M

    2014-11-01

    Fragility fractures associated with osteoporosis extract a large financial and personal toll on society. Pharmaceutical or dietary calcium intake is needed to increase bone mineral density to prevent fragility fractures. Although dairy products are a good source of calcium, patients who are unable to digest lactose tend to avoid them and are put at a greater risk for fracture than the general population. Anecdotal reports suggest that lactose maldigesters, when consuming raw milk, have a dramatic reduction in symptoms relative to pasteurized milk. The mechanism of the reported reduction in symptoms, if true, is unknown. The purpose of the current study was to survey raw milk drinkers to ascertain their health-related motivations for consuming raw milk, especially as they relate to lactose maldigestion. An online survey regarding raw milk was completed by 153 of 1527 members of a raw milk-buying community. The primary reason the respondents cited for drinking raw milk was that they believed it was more healthful; 30% reported some gastrointestinal discomfort when drinking pasteurized milk, yet almost all (99%) reported consuming raw milk without discomfort. Despite the reports of gastrointestinal discomfort, only 5% of respondents had been diagnosed as lactose intolerant by a medical professional, and only 1% had been diagnosed as lactose intolerant via the gold-standard hydrogen breath test. The primary motivation for drinking raw milk is its perceived health value, not its digestibility. Although raw milk appears to be more easily digested than pasteurized milk in our survey sample, the mechanism of digestibility remains unknown.

  19. Creating a simplified model of oil refining and solution of the model using a linear programming method. Part 1, Model presentation

    Energy Technology Data Exchange (ETDEWEB)

    Duric, M; Novakovic, M; Stojkanovic, L

    1983-01-01

    Based on a detailed analysis of technological limitations in oil refining at an oil refinery (NPZ) in the separation of petroleum products, specifications with regard to quality and market limitations, a general model is created of oil refining. The number of actual variables is reduced to a minimum, while the number of linear limitations is adapted to the selected technology and raw material quality. The nonlinearity of certain characteristics is overcome using the so called movement factor.

  20. Processing biofuels from farm raw materials - A systems study; Pelletering och brikettering av jordbruksraavaror - En systemstudie

    Energy Technology Data Exchange (ETDEWEB)

    Nilsson, Daniel; Bernesson, Sven

    2008-03-15

    Use of processed biofuels (pellets, briquettes) has greatly increased in Sweden in recent decades, mainly to replace fossil fuels in large boilers, e.g. in coal powder boilers. More recently, the demand from private households and residential heating systems has also increased, mainly due to conversion from fossil heating oil. This increased interest in pellets and briquettes for heating is beginning to cause a shortage of the traditional raw materials, sawdust and wood shavings, and therefore attention is turning to using a variety of agricultural products as raw material. Such raw materials include cultivated energy crops and wastes and by-products from agriculture. This study describes the typical systems currently used for production of pellets and briquettes and investigates the possibility of using energy crops (Salix, reed canary-grass and hemp) and various wastes and by-products from processing of farm products (straw, cereal screenings, rape-seed meal and distiller's waste) as raw materials. Previous experiences of pelletizing and briquetting of these raw materials are reviewed in order to comprehensively identify possible combustion problems that may occur. On the basis of the results obtained, scenarios for possible production systems in a five-year perspective are presented and the costs and energy demands for these systems calculated. These future scenarios include large scale plants and micro-scale plants, as well as static and mobile equipment. The five main conclusions from the study are: - The farm raw materials of greatest interest for large-scale production are pelleted Salix and reed canary-grass. They have competitive prices and acceptable fuel properties and could be mixed with sawdust in existing large-scale pelletizing factories in Sweden. - Straw has low production costs but can cause serious ash-related problems. Hemp has too high production costs to be of commercial interest, while distiller's waste and rape-seed meal currently

  1. Catalytic gasification of oil-shales

    Energy Technology Data Exchange (ETDEWEB)

    Lapidus, A.; Avakyan, T. [I.M. Gubkin Russian State Univ. of Oil and Gas, Moscow (Russian Federation); Strizhakova, Yu. [Samara State Univ. (Russian Federation)

    2012-07-01

    Nowadays, the problem of complex usage of solid fossil fuels as raw materials for obtaining of motor fuels and chemical products is becoming increasingly important. A one of possible solutions of the problem is their gasification with further processing of gaseous and liquid products. In this work we have investigated the process of thermal and catalytic gasification of Baltic and Kashpir oil-shales. We have shown that, as compared with non-catalytic process, using of nickel catalyst in the reaction increases the yield of gas, as well as hydrogen content in it, and decreases the amount of liquid products. (orig.)

  2. Tallness is associated with risk of testicular cancer: evidence for the nutrition hypothesis.

    Science.gov (United States)

    Dieckmann, K-P; Hartmann, J T; Classen, J; Lüdde, R; Diederichs, M; Pichlmeier, U

    2008-11-04

    The pathogenesis of testicular germ cell tumours (GCTs) is potentially influenced by high-energy nutrition during infancy. As adult height is a proxy for childhood nutrition, we investigated the role of nutrition in GCT pathogenesis by comparing stature of patients with healthy men. In a matched case-control study, 6415 patients with GCT were compared with healthy army conscripts (1:6 matching modus) with regard to height (cm) and body mass index (BMI; kg/m(2)). Statistical analysis involved tabulation of descriptive height measures and BMI. Conditional logistic regression models were used to quantify the association of GCT with height, with odds ratios (OR) adjusted for BMI. The literature was searched for studies on stature in GCT patients. Body size is significantly associated with risk of GCT, very tall men (>195 cm) having a GCT risk of OR=3.35 (95% confidence intervals (CI): 2.88-3.90; adjusted). Short stature is protective (OR=0.798; 95% CI: 0.68-0.93). Both histologic subgroups are associated with tallness. Of 16 previous reports, 7 were confirmative, 5 had null and 4 equivocal results. The association of stature with GCT risk accords with the nutrition hypothesis of GCT. This study expands the current view of GCT tumorigenesis by suggesting that high-calorie intake in childhood promotes GCT precursors originating in utero.

  3. Para rubber seed oil: new promising unconventional oil for cosmetics.

    Science.gov (United States)

    Lourith, Nattaya; Kanlayavattanakul, Mayuree; Sucontphunt, Apirada; Ondee, Thunnicha

    2014-01-01

    Para rubber seed was macerated in petroleum ether and n-hexane, individually, for 30 min. The extraction was additionally performed by reflux and soxhlet for 6 h with the same solvent and proportion. Soxhlet extraction by petroleum ether afforded the greatest extractive yield (22.90 ± 0.92%). Although antioxidant activity by means of 1, 1-diphenyl-2-picrylhydrazyl (DPPH) assay was insignificantly differed in soxhleted (8.90 ± 1.15%) and refluxed (9.02 ± 0.71%) by n-hexane, soxhlet extraction by n-hexane was significantly (p < 0.05) potent scavenged 2,2'-azino-bis(3-ethylbenzothaiazoline)-6-sulfonic acid) or ABTS radical with trolox equivalent antioxidant capacity (TEAC) of 66.54 ± 6.88 mg/100 g oil. This extract was non cytotoxic towards normal human fibroblast cells. In addition, oleic acid and palmitic acid were determined at a greater content than in the seed of para rubber cultivated in Malaysia, although linoleic and stearic acid contents were not differed. This bright yellow extract was further evaluated on other physicochemical characters. The determined specific gravity, refractive index, iodine value, peroxide value and saponification value were in the range of commercialized vegetable oils used as cosmetic raw material. Therefore, Para rubber seed oil is highlighted as the promising ecological ingredient appraisal for cosmetics. Transforming of the seed that is by-product of the important industrial crop of Thailand into cosmetics is encouraged accordingly.

  4. Learning from Failure: China’s Overseas Oil Investments

    Directory of Open Access Journals (Sweden)

    Susana Moreira

    2013-01-01

    Full Text Available Thirsty for oil and other raw materials needed to fuel its breakneck development, China is funnelling money and manpower into an expanding number of countries in order to secure access to natural resources. This effort has successfully increased Chinese oil assets overseas but it has also exposed Beijing and Chinese national oil companies (NOCs to significant risks. The present paper focuses on one type of risk – political risk – and how it has affected China’s global quest for oil since 1993. It starts with a brief overview of political risk. It then looks at political risk management as applied to the oil industry in general. The paper continues with a discussion of the political risk management of Chinese national oil companies over time. This includes a concise exam-ination of several instances in which the interests of Chinese NOCs have been undermined due to political risk and the shortcomings in the approaches of Chinese NOCs to political risk. Recent developments suggest that Chinese NOCs are learning from these mistakes and adjusting their strategies accordingly. Although progress toward these readjust-ments has been made, China’s own socio-political context is still hampering the ability of Chinese NOCs to deal with on-the-ground realities that are clearly much more unstable than China’s own.

  5. Natural gas as raw material for clean fuels and chemicals in the next decades

    International Nuclear Information System (INIS)

    Colitti, M.

    1998-01-01

    Modern industry originates in a change of feedstock, the result of a never-ending quest for a better, cheaper raw material. In the origin, there was coal, a source of both energy and industrial feedstock, the so-called synthesis gas. Then, coal was replaced by liquid hydrocarbons, coming from a refinery or from wells of crude oil and gas. The passage from solid to liquids was part and parcel of a structural change which has produced an extraordinary acceleration of economic growth. We might hope that the same will happen when natural gas will comes in to displace the liquids. New feedstocks do not come in without a fight. It is not only a matter of price, but also of technology, and of the natural tendency of industries to protect their own investments in plants which are all of a sudden made to look old. Rather than repeat for the 'nth' time the list of technologies which can turn natural gas into a basic feedstock for oil and petrochemical industries, the author discusses how will companies decide upon this matter

  6. Raw and renewable polymers

    CSIR Research Space (South Africa)

    Joseph, S

    2010-01-01

    Full Text Available in the permeability of the membrane and HO H3C H3C H2C H2C HO OH NH NH OH O OC C n O O O O Fig. 4 Structure of Chitin Raw and Renewable Polymers promoting internal osmotic imbalances. This results in leaching of electrolytes and proteins. 2... is often lost. In most cases this denaturation is not reversible. R-CH-COOH NH2 w Amino acid H2N COOHR a Amino acid Fig. 5 Structure of amino acid Raw and Renewable Polymers The solubilities of proteins vary considerably based on compositions...

  7. Jojoba oil: A state of the art review and future prospects

    International Nuclear Information System (INIS)

    Sánchez, Marcos; Avhad, Mangesh R.; Marchetti, Jorge M.; Martínez, Mercedes; Aracil, José

    2016-01-01

    Highlights: • Jojoba oil is a unique oil formed by long esters instead of triglycerides. • Jojoba cake is gaining interest because of the extraction of valuable chemicals. • Jojoba oil heterogeneous-catalyzed methanolysis makes the process more profitable. - Abstract: Jojoba oil, which is derived from the extraction of Jojoba seed, has a peculiar molecular structure in comparison with the rest of conventional oils. Jojoba oil is formed by long monounsaturated esters whereas the rest of the oils are usually composed by triglycerides. This unconventional structure confers to Jojoba oil unique properties and characteristics that are very valuable for fine chemical industry and for the production of pharmaceuticals. In addition, Jojoba oil can be an excellent source of fatty acid alkyl esters or biodiesel after the transesterification process and the purification steps. This review presents general information about the production of Jojoba oil and its derivatives, its composition, oil extraction process and the applications of this oil when it is used directly or after chemical transformation as well as the possible purposes of Jojoba meal after extraction. In addition, this paper contemplates the advantages and disadvantages of the use of homogeneous and heterogeneous catalysts for the Jojoba oil transesterification as well as different methods to obtain long monounsaturated alcohols, which have pharmaceutical applications, after being separated from biodiesel. The properties of the products derived from the transesterification of Jojoba oil are broadly discussed. Moreover, this review suggests future research opportunities such as a possible biorefinery using Jojoba oil as main raw material, supercritical methods and simultaneous extraction/reaction process which are fully discussed.

  8. Study on geochemical occurrences of REE in Wangqing oil shale

    Energy Technology Data Exchange (ETDEWEB)

    Bai, Jing-ru; Wang, Qing; Liu, Tong; Wei, Yan-zhen; Bai, Zhang [Northeast Dianli Univ., Jilin (China). Engineering Research Centre

    2013-07-01

    Sequential chemical extraction experiment (SCEE) and Float- sink experiment (FSE) have been employed on oil shale research from Wangqing, Jilin province China, in order to determine the binding forms of rare earth elements (REE) in oil shale. The REE contents were determined by the inductively coupled plasma-mass spectrometry (ICP-MS). Wangqing oil shale was screened into specific gravity density level: <1.5g/cm{sup 3}, 1.5-1.6g/cm{sup 3}, 1.6-2.0g/cm{sup 3}, 2.0-2.4g/cm{sup 3}, >2.4g/cm{sup 3}. The mode of occurrences of rare earth elements in Wangqing oil shale was studied by six-step SCEE. FSE results show that REEs in Wangqing oil shale exist mainly in inorganic minerals and more in excluded mineral, while SCEE results show that REEs of Wangqing oil shale is primarily occurred in minerals, including carbonate, Fe-Mn oxide, sulfide, and Si-minerals. FSE and SCEE results fully illustrate excluded mineral is mainly mode of occurrence of REEs in Wangqing oil shale, whereas inorganic minerals and organic matter is not that. The REE distribution pattern curves of FSE density and SCEE fraction products are similar with that of raw oil shale. The REE in different densities products has a close connection with terrigenous clastic rock, and the supply of terrestrial material is stable.

  9. Identification of molecular performance from oil palm clones based on SSR markers

    Science.gov (United States)

    Putri, Lollie Agustina P.; Basyuni, M.; Bayu, Eva S.; Arvita, D.; Arifiyanto, D.; Syahputra, I.

    2018-03-01

    In Indonesia, the oil palms are an important economic crop, producing food and raw materials for the food, confectionary, cosmetics and oleo-chemical industrial demands of oil palm products. Clonal oil palm offers the potential for greater productivity because it is possible to establish uniform tree stands comprising identical copies (clones) of a limited number of highly productive oil palms. Unfortunately, tissue culture sometimes accentuates the expression of detects in oil palm, particularly when embryogenesis is induced in particullar callus for prolonged periods. This research is conducted by taking individual tree sample of clone germplasm two years old. The purpose of this research is to molecular performance analysis of some oil palm clones based on SSR markers. A total of 30 trees oil palm clones were used for analysis. In this experiment, the DNA profile diversity was assessed using five loci of oil palm’s specific SSR markers. The results of the experiment indicated out of 3 SSR markers (FR-0779, FR-3663 and FR-0782) showed monomorphic of PCR product and 2 SSR markers (FR-0783 and FR- 3745) showed polymorphic of PCR product. There are 10 total number of PCR product. These preliminary results demonstrated SSR marker can be used to evaluate genetic relatedness among trees of oil palm clones.

  10. Sustainable Palm Oil Production For Bioenergy Supply Chain

    OpenAIRE

    Ng, Wai Kiat

    2009-01-01

    A bioenergy supply chain is formed by many parts which from the raw material, biomass feedstock until the distribution and utilisation. The upstream activity is always managed in a sustainable way in order to be capable enough to support the downstream activity. In this dissertation, the sustainable production of palm oil is focused and researched through problem identification and solving by using the operation management perspective and practices. At first, the global biomass industry is st...

  11. Intake of minerals, trace elements and vitamins in bone and raw food rations in adult dogs.

    Science.gov (United States)

    Dillitzer, Natalie; Becker, Nicola; Kienzle, Ellen

    2011-10-01

    The aim of the present study was to evaluate the vitamin and mineral content of bone and raw food rations fed to adult dogs in Germany. Pet owners completed a standardised feeding questionnaire. The composition of 95 rations was calculated from mean data for foodstuffs using nutrition balancing software. Typical ration ingredients were meats, fish, offal, dairy products, eggs, oil, nuts, cod liver oil and natural and commercial supplements. The supply of nutrients was compared with the recommended allowance (RA). Of the rations that were used, 10 % supplied vitamin D was below RA. About half of the rations supplied less iodine than the minimum requirement. Many of the rations had low Zn and Cu supply, and 25 % of the rations supplied only 70 % of RA for vitamin A or less. A total of 60 % of the rations had one or more of the above-mentioned imbalance. The remaining 40 % of rations either had minor problems like Ca excess from bones or they were balanced.

  12. Quality quantification model of basic raw materials

    Directory of Open Access Journals (Sweden)

    Š. Vilamová

    2016-07-01

    Full Text Available Basic raw materials belong to the key input sources in the production of pig iron. The properties of basic raw materials can be evaluated using a variety of criteria. The essential ones include the physical and chemical properties. Current competitive pressures, however, force the producers of iron more and more often to include cost and logistic criteria into the decision-making process. In this area, however, they are facing a problem of how to convert a variety of vastly different parameters into one evaluation indicator in order to compare the available raw materials. This article deals with the analysis of a model created to evaluate the basic raw materials, which was designed as part of the research.

  13. Ecological assessment of oil-gas producing area in Kazakhstan zone of Caspian sea and using the bioremediation technology for cleaning of high level oil polluted sites

    International Nuclear Information System (INIS)

    Bigaliev, A.A.; Ishanova, N.E.; Bijazheva, S.M.; Novikova, A.; Bigaliev, A.B.

    2008-01-01

    A significant part of mineral raw material resources of Kazakhstan placed in the depth of the Caspian region, where more than 90% extracting of oil and natural gas, 100% balance store rare ground, 3.2% uranium, ore 0.3%, 90.5% sawn store concentrated. Last years, it takes intensive works by extraction of carbon raw materials in Kazakhstan sector of the Caspian sea. It brought to exceeding of coastal pollution at the North and middle the Caspian coastal pollution with oil products in average till 0.282 mg/l. Maximum meaning oil product pollution reaches 0.56 mg/l (which means exceeding of limited concentration on 11 times). How much money need to cover cost of remediation in real sites? Develop of assessment and monitoring procedures based on fate mechanisms for most of representative hydrocarbons in polluted soils. Step 1 - Collection of heavily polluted portions of soils, separation of hydrocarbons by cost efficient mechanical procedures and send HC rich material (HC>95%) to prepare of alternative fuel. Return of low HC content sand to project area (HC<5.0%). Step 2 - Development of low cost bioremediation procedures in areas transformed to moderately polluted site (HC<5% after removing of heavily polluted portions) with uniform HC content. We are needed to develop of coast efficiency approach for cleaning of high level oily polluted sites around urban areas in Kazakhstan new methodology to estimate polluted area and recover of pollution history, low cost bioremediation

  14. Data extraction from proteomics raw data

    DEFF Research Database (Denmark)

    Mancuso, Francesco; Bunkenborg, Jakob; Wierer, Michael

    2012-01-01

    In shot-gun proteomics raw tandem MS data are processed with extraction tools to produce condensed peak lists that can be uploaded to database search engines. Many extraction tools are available but to our knowledge, a systematic comparison of such tools has not yet been carried out. Using raw data...

  15. Natural Zeolite Sample and Investigation Its Use in Oil Bleaching Sector

    Science.gov (United States)

    Bilgin, Oyku

    2017-12-01

    In the sector of oil bleaching, the stored raw oil is subjected to physical and chemical methods such as degumming, neutralization, bleaching, deodorization and winterization. In the process of oil bleaching, the selection of correct bleaching earth in accordance with oil characteristics matters so much. Bleaching earth is an inorganic product used in removing impurities being available within the structures of vegetable, animal oil (sunflower, soya, corn, palm, tallow, rapeseed, fish oils…etc.) and fatty acids, mineral oils (glycerine, paraffin, mineral motor oils. etc.) with the adsorption process. The factors such as low cost of oil bleaching earth, low ratio of oil retaining, high bleaching capacity in spite of using them in small amounts, filter’s delayed blocking by the earth and non-increase of the free acidity of the oil should be taken into consideration. Bleaching earths are processed with some acids in order to widen their surface areas. During this process, a certain amount of acid is left within oil bleaching earths even if it is very little. These acids also increase oil’s acidity by oxidizing oil in the course of bleaching process. In this study, zeolite sample taken from Manisa -Demirci region was used. Following the processes of crushing and sieving, zeolite sample was subjected to chemical analyses according to their grain thickness, microscopic examination, the analyses of XRD and cation exchange capacity and their ore characteristics were determined. Afterwards, it was searched whether zeolite sample has oil bleaching ability or not or whether it can be used as oil bleaching earth or not.

  16. Factors affecting adherence to a raw vegan diet

    OpenAIRE

    Link, Lilli B.; Jacobson, Judith S.

    2007-01-01

    The purpose of this study was to evaluate adherence and identify predictors of adherence to a raw vegan diet (i.e., uncooked plant foods) following a stay at a raw vegan institute. In this cohort study of guests at a raw vegan institute, subjects completed written questionnaires upon arrival and 12 weeks later. Of 107 eligible guests, 84 participated. Mean age was 54 years, 23 were male, and 73 white. Fifty-one completed the 12-week follow-up. Eight (16%) reported their diet to be ≥80% raw ve...

  17. Improving the raw management in Ukraine

    Energy Technology Data Exchange (ETDEWEB)

    Jung, H.G.; Koever, M. [NUKEM Technologies GmbH, Alzenau (Germany)

    2013-07-01

    In Ukraine 13 VVER-1000 and 2 VVER-440 reactor units generate about 50 % of the country's energy production. By contrast, when looking at the large volume of radioactive waste of all categories, which is produced by these nuclear power plants (NPP), the radioactive waste (RAW) management - onsite of NPP, towards interim storage as well as towards final disposal - is still not adequately developed. Currently all operational waste of Ukrainian NPP is incompletely treated/conditioned and stored onsite, though insufficient storage capacity is available at the NPP. As no effective Ukraine-wide strategy is yet established to manage RAW beyond NPP a serious situation could arise, which even leads to constrained temporary shut-down of reactor units, threatening the energy supply of whole the country. In addition large quantities of RAW, partly badly sorted, derive from decommissioning of the shut-down Chernobyl NPP. Also other sources of RAW contribute to the whole volume, which has to be managed in Ukraine, as research reactors, reprocessing of spent nuclear fuel and other nuclear facilities and applications. Nevertheless, operational and shut-down NPP in Ukraine are by far the largest producers. To support Ukraine in managing their radioactive waste NUKEM Technologies GmbH was appointed to provide technical support for the improvement of the current situation in cooperation with responsible Ukrainian experts towards a targeted, comprehensive and effective RAW management. (orig.)

  18. Temporal patterns of foliar ozone symptoms on tall milkweed (Asclepias exaltata L.) in Great Smoky Mountains National Park.

    Science.gov (United States)

    Chappelka, A H; Somers, G L; Renfro, J R

    2007-10-01

    Incidence and severity of ozone-induced foliar symptoms on tall milkweed (Asclepias exaltata L.) along selected trails in Great Smoky Mountains National Park (GRSM) were determined by two surveys/season conducted from 1992 through 1996. Overall incidence was 73%, and was 84%, 44%, 90%, 58%, and 82% for 1992-1996, respectively for the same clusters. Average incidence was 61% and 84% for the 1st and 2nd surveys, respectively. Seasonal comparisons showed two distinct injury groupings regarding incidence and severity of injury: 1992, 1994 and 1996 (high injury); 1993 and 1995 (low injury). No discernible patterns were observed between symptomatic and asymptomatic plants regarding height, herbivory or flowering. Regression analyses indicated no differentiation in foliar symptoms regarding topographic position, aspect, slope or elevation over the 5-year study period. Our findings indicate other micro-site or genetic factors may control ozone sensitivity of tall milkweed in GRSM.

  19. Factors affecting the yield of bio-oil from the pyrolysis of coconut shell.

    Science.gov (United States)

    Gao, Yun; Yang, Yi; Qin, Zhanbin; Sun, Yi

    2016-01-01

    Coconut is a high-quality agricultural product of the Asia-Pacific region. In this paper, coconut shell which mainly composed of cellulose, hemicellulose, lignin was used as a raw material for coconut shell oil from coconut shell pyrolysis. The influence of the pyrolysis temperature, heating rate and particle size on coconut oil yield was investigated, and the effect of heating rate on coconut oil components was discussed. Experimental results show that the maximum oil yield of 75.74 wt% (including water) were obtained under the conditions that the final pyrolysis temperature 575 °C, heating rate 20 °C/min, coconut shell diameter about 5 mm. Thermal gravimetric analysis was used and it can be seen that coconut shell pyrolysis process can be divided into three stages: water loss, pyrolysis and pyrocondensation. The main components of coconut-shell oil are water (about 50 wt%), aromatic, phenolic, acid, ketone and ether containing compounds.

  20. Tocoferois e tocotrienois em óleos vegetais e ovos Tocopherols and tocotrienols in vegetable oils and eggs

    Directory of Open Access Journals (Sweden)

    Michele Guinaz

    2009-01-01

    Full Text Available The distribution and content of vitamin E isomers was investigated in vegetable oils and raw and cooked egg yolk in commercial restaurants. The analysis of the eight vitamin E isomers was carried out by High Performance Liquid Chromatography (HPLC with fluorescence detection. The tocopherol and tocotrienol composition of foods varied considerably. Tocopherols were detected in greater quantity and frequency. The α-tocopherol predominated in egg yolks and olive oil while γ-tocopherol was found in high quantities in soybean and canola oils. Cooking did not cause major losses for most of the vitamin E isomers in egg yolks.

  1. Environmental data from laboratory- and bench-scale Pressurized Fluidized-Bed Hydroretorting of Eastern oil shale

    Energy Technology Data Exchange (ETDEWEB)

    Mensinger, M.C.; Rue, D.M.; Roberts, M.J.

    1991-01-01

    As part of a 3-year program to develop the Pressurized Fluidized-Bed Hydroretorting (PFH) Process for Eastern oil shales, IGT conducted tests in laboratory-scale batch and continuous units as well as a 45-kg/h bench-scale unit to generate a data base for 6 Eastern shales. Data were collected during PFH processing of raw Alabama and Indiana shales and a beneficiated Indiana shale for environmental mitigation analyses. The data generated include trace element analyses of the raw feeds and spent shales, product oils, and sour waters. The sulfur compounds present in the product gas and trace components in the sour water were also determined. In addition, the leaching characteristics of the feed and residue solids were determined. The data obtained were used to evaluate the environmental impact of a shale processing plant based on the PFH process. This paper presents the environmental data obtained from bench-scale tests conducted during the program.

  2. Environmental data from laboratory- and bench-scale Pressurized Fluidized-Bed Hydroretorting of Eastern oil shale

    Energy Technology Data Exchange (ETDEWEB)

    Mensinger, M.C.; Rue, D.M.; Roberts, M.J.

    1991-12-31

    As part of a 3-year program to develop the Pressurized Fluidized-Bed Hydroretorting (PFH) Process for Eastern oil shales, IGT conducted tests in laboratory-scale batch and continuous units as well as a 45-kg/h bench-scale unit to generate a data base for 6 Eastern shales. Data were collected during PFH processing of raw Alabama and Indiana shales and a beneficiated Indiana shale for environmental mitigation analyses. The data generated include trace element analyses of the raw feeds and spent shales, product oils, and sour waters. The sulfur compounds present in the product gas and trace components in the sour water were also determined. In addition, the leaching characteristics of the feed and residue solids were determined. The data obtained were used to evaluate the environmental impact of a shale processing plant based on the PFH process. This paper presents the environmental data obtained from bench-scale tests conducted during the program.

  3. The effect of nitrogen addition on biomass production and competition in three expansive tall grasses

    Czech Academy of Sciences Publication Activity Database

    Holub, Petr; Tůma, I.; Fiala, Karel

    2012-01-01

    Roč. 170, NOV 2012 (2012), s. 211-216 ISSN 0269-7491 R&D Projects: GA ČR(CZ) GA526/06/0556; GA MZe QJ1220007; GA MŠk(CZ) ED1.1.00/02.0073 Institutional support: RVO:67985939 ; RVO:67179843 Keywords : aboveground biomass * aggressivity * crowding coefficient * Nitrogen * tall grasses Subject RIV: EH - Ecology, Behaviour; EF - Botanics (BU-J) Impact factor: 3.730, year: 2012

  4. Production of raw cassava starch-degrading enzyme by Penicillium and its use in conversion of raw cassava flour to ethanol.

    Science.gov (United States)

    Lin, Hai-Juan; Xian, Liang; Zhang, Qiu-Jiang; Luo, Xue-Mei; Xu, Qiang-Sheng; Yang, Qi; Duan, Cheng-Jie; Liu, Jun-Liang; Tang, Ji-Liang; Feng, Jia-Xun

    2011-06-01

    A newly isolated strain Penicillium sp. GXU20 produced a raw starch-degrading enzyme which showed optimum activity towards raw cassava starch at pH 4.5 and 50 °C. Maximum raw cassava starch-degrading enzyme (RCSDE) activity of 20 U/ml was achieved when GXU20 was cultivated under optimized conditions using wheat bran (3.0% w/v) and soybean meal (2.5% w/v) as carbon and nitrogen sources at pH 5.0 and 28 °C. This represented about a sixfold increment as compared with the activity obtained under basal conditions. Starch hydrolysis degree of 95% of raw cassava flour (150 g/l) was achieved after 72 h of digestion by crude RCSDE (30 U/g flour). Ethanol yield reached 53.3 g/l with fermentation efficiency of 92% after 48 h of simultaneous saccharification and fermentation of raw cassava flour at 150 g/l using the RCSDE (30 U/g flour), carried out at pH 4.0 and 40 °C. This strain and its RCSDE have potential applications in processing of raw cassava starch to ethanol.

  5. Pumpkin (Cucurbita pepo L.) seed oil as an alternative feedstock for the production of biodiesel in Greece

    Energy Technology Data Exchange (ETDEWEB)

    Schinas, P.; Karavalakis, G.; Davaris, C.; Anastopoulos, G.; Karonis, D.; Zannikos, F.; Stournas, S.; Lois, E. [Laboratory of Fuels and Lubricants Technology, School of Chemical Engineering, National Technical University of Athens, 9 Iroon Polytechniou Street, Zografou Campus, 157 80 Athens (Greece)

    2009-01-15

    In recent years, the acceptance of fatty acid methyl esters (biodiesel) as a substitute to petroleum diesel has rapidly grown in Greece. The raw materials for biodiesel production in this country mainly include traditional seed oils (cotton seed oil, sunflower oil, soybean oil and rapeseed oil) and used frying oils. In the search for new low-cost alternative feedstocks for biodiesel production, this study emphasizes the evaluation of pumpkin seed oil. The experimental results showed that the oil content of pumpkin seeds was remarkably high (45%). The fatty acid profile of the oil showed that is composed primarily of linoleic, oleic, palmitic and stearic acids. The oil was chemically converted via an alkaline transesterification reaction with methanol to methyl esters, with a yield nearly 97.5 wt%. All of the measured properties of the produced biodiesel met the current quality requirements according to EN 14214. Although this study showed that pumpkin oil could be a promising feedstock for biodiesel production within the EU, it is rather difficult for this production to be achieved on a large scale. (author)

  6. Concepts on the contribution of chemistry to a sustainable development. Renewable raw materials

    International Nuclear Information System (INIS)

    Metzger, J.O.; Eissen, M.

    2004-01-01

    The principles of the Rio Conference (1992) and Agenda 21 address the pressing problems of today and also aim at preparing the world for the challenges of this century. The conservation and management of resources for development are the main foci of interest, to which chemistry will have to make a considerable contribution. Since base chemicals are produced in large quantities and important product lines are synthesized from them, their resource-saving production is especially important for a sustainable development. New processes based on renewable feedstocks are significant here. Most products that are obtained from renewable raw materials may, at present, not be able to compete with the products of the petrochemical industry, but this will change as oil becomes scarcer and oil prices rise. The design of chemical products should make sustainable processing and recycling possible, and should prevent their bioaccumulation. Methods and criteria to assess their contribution to a sustainable development are necessary. The time necessary to introduce the new more sustainable processes and products has to be diminished by linking their development with operational innovation management and with efficient environmental-political control procedures. (authors)

  7. Shale oil specialty markets: Screening survey for United States applications

    Energy Technology Data Exchange (ETDEWEB)

    1987-12-01

    EG and G requested J. E. Sinor Consultants Inc. to carry out an initial screening study on the possibilities for producing specialty chemicals from oil shale. Raw shale oil is not an acceptable feedstock to refineries and there are not enough user of heavy fuel oil in the western oil shale region to provide a dependable market. The only alternatives are to hydrotreat the oil, or else ship it long distances to a larger market area. Either of these alternatives results in a cost penalty of several dollars per barrel. Instead of attempting to enter the large-volume petroleum products market, it was hypothesized that a small shale oil facility might be able to produce specialty chemicals with a high enough average value to absorb the high costs of shipping small quantities to distant markets and still provide a higher netback to the plant site than sales to the conventional petroleum products market. This approach, rather than attempting to refine shale oil or to modify its characteristics to satisfy the specifications for petroleum feedstocks or products, focuses instead on those particular characteristics which distinguish shale oil from petroleum, and attempts to identify applications which would justify a premium value for those distinctive characteristics. Because byproducts or specialty chemicals production has been a prominent feature of oil shale industries which have flourished for periods of time in various countries, a brief review of those industries provides a starting point for this study. 9 figs., 32 tabs.

  8. Large for Gestational Age Newborns from Mothers Without Diabetes Mellitus Tend to Become Tall and Lean Toddlers.

    Science.gov (United States)

    de Zegher, Francis; Pérez-Cruz, Miriam; Sebastiani, Giorgia; Díaz, Marta; López-Bermejo, Abel; Ibáñez, Lourdes

    2016-11-01

    A longitudinal study with dual x-ray absorptiometry disclosed that infants born large for gestational age from mothers without diabetes mellitus and without excessive gestational weight gain tend to be long with increased adipose tissue as newborns and tall and lean as toddlers. Copyright © 2016 Elsevier Inc. All rights reserved.

  9. Glucose from a cellulose-containing raw material

    Energy Technology Data Exchange (ETDEWEB)

    Feniksova, R V

    1977-01-01

    Glucose was produced by mixing the raw material with an enzyme and water, enzymic hydrolysis of raw material, and separation of the hydrolyzate. To increase the yield of glucose, the hydrolysis took place in 2 stages: at the 1st stage, the hydrolysis was continued until the mixture of glucose and oligosaccharides was obtained under the influence of an active enzyme (1 to 20 units/g of cellulose present in the raw material); at the 2nd stage, cellulase immobilized on an insoluble carrier (by covalent bonds) was used for the hydrolysis of oligosaccharides. The hydromodulus of the suspension of cellulose-containing raw material was maintained 5 to 30. A carrier nonhydrolyzable by cellulase, for instance a homogenious macroporous Aerosil gel, a porous glass, or porous ceramics, was used.

  10. Authentication and Quantitation of Fraud in Extra Virgin Olive Oils Based on HPLC-UV Fingerprinting and Multivariate Calibration

    Science.gov (United States)

    Carranco, Núria; Farrés-Cebrián, Mireia; Saurina, Javier

    2018-01-01

    High performance liquid chromatography method with ultra-violet detection (HPLC-UV) fingerprinting was applied for the analysis and characterization of olive oils, and was performed using a Zorbax Eclipse XDB-C8 reversed-phase column under gradient elution, employing 0.1% formic acid aqueous solution and methanol as mobile phase. More than 130 edible oils, including monovarietal extra-virgin olive oils (EVOOs) and other vegetable oils, were analyzed. Principal component analysis results showed a noticeable discrimination between olive oils and other vegetable oils using raw HPLC-UV chromatographic profiles as data descriptors. However, selected HPLC-UV chromatographic time-window segments were necessary to achieve discrimination among monovarietal EVOOs. Partial least square (PLS) regression was employed to tackle olive oil authentication of Arbequina EVOO adulterated with Picual EVOO, a refined olive oil, and sunflower oil. Highly satisfactory results were obtained after PLS analysis, with overall errors in the quantitation of adulteration in the Arbequina EVOO (minimum 2.5% adulterant) below 2.9%. PMID:29561820

  11. The height leadership advantage in men and women: Testing evolutionary psychology predictions about the perceptions of tall leaders

    NARCIS (Netherlands)

    Blaker, N. M; Rompa, I.; Dessing, I. H.; Vriend, A. F.; Herschberg, C.; van Vugt, M.

    2013-01-01

    Research suggests that tall individuals have an advantage over short individuals in terms of status, prestige, and leadership, though it is not clear why. Applying an evolutionary psychology perspective, we predicted that taller individuals are seen as more leader-like because they are perceived as

  12. The pass through of oil prices into euro area consumer liquid fuel prices in an environment of high and volatile oil prices

    Energy Technology Data Exchange (ETDEWEB)

    Meyler, Aidan [European Central Bank, Frankfurt am Main (Germany)

    2009-11-15

    Crude and refined oil prices have been relatively high and volatile on a sustained basis since 1999. This paper considers the pass through of oil prices into consumer liquid (i.e. petrol, diesel and heating) fuel prices in such an environment. The pass through of oil prices into consumer liquid fuel prices has already been addressed extensively in the literature. Nonetheless much of this literature has either focused on the United States or on a time period when oil prices were relatively stable, or has used monthly data. The main contribution of this paper is a comprehensive combination of many features that have been considered before but rarely jointly. These features include: (1) the analysis of the euro area as an aggregate and a large number of countries (the initial 12 member states); (2) the consideration of different time periods; (3) the modelling of the data in raw levels rather than in log levels. This turns out to have important implications for our findings; (4) the use of high frequency (weekly) data, which, as results will suggest, are the lowest frequency one should consider; (5) the investigation of the different stages of the production chain from crude oil prices to retail distribution - refining costs and margins, distribution and retailing costs and margins; (6) the examination of prices including and excluding taxes - excise and value-added; (7) the modelling of prices for three fuel types - passenger car petrol and diesel separately and home heating fuel oil; (8) lastly we also address the issue of possible asymmetries, allowing for the pass through to vary according to (a) whether price are increasing or decreasing and (b) whether price levels are above or below their equilibrium level. The main findings are as follows: First, as distribution and retailing costs and margins have been broadly stable on average, the modelling of the relationship between consumer prices excluding taxes and upstream prices in raw levels rather than in

  13. The pass through of oil prices into euro area consumer liquid fuel prices in an environment of high and volatile oil prices

    International Nuclear Information System (INIS)

    Meyler, Aidan

    2009-01-01

    Crude and refined oil prices have been relatively high and volatile on a sustained basis since 1999. This paper considers the pass through of oil prices into consumer liquid (i.e. petrol, diesel and heating) fuel prices in such an environment. The pass through of oil prices into consumer liquid fuel prices has already been addressed extensively in the literature. Nonetheless much of this literature has either focused on the United States or on a time period when oil prices were relatively stable, or has used monthly data. The main contribution of this paper is a comprehensive combination of many features that have been considered before but rarely jointly. These features include: (1) the analysis of the euro area as an aggregate and a large number of countries (the initial 12 member states); (2) the consideration of different time periods; (3) the modelling of the data in raw levels rather than in log levels. This turns out to have important implications for our findings; (4) the use of high frequency (weekly) data, which, as results will suggest, are the lowest frequency one should consider; (5) the investigation of the different stages of the production chain from crude oil prices to retail distribution - refining costs and margins, distribution and retailing costs and margins; (6) the examination of prices including and excluding taxes - excise and value-added; (7) the modelling of prices for three fuel types - passenger car petrol and diesel separately and home heating fuel oil; (8) lastly we also address the issue of possible asymmetries, allowing for the pass through to vary according to (a) whether price are increasing or decreasing and (b) whether price levels are above or below their equilibrium level. The main findings are as follows: First, as distribution and retailing costs and margins have been broadly stable on average, the modelling of the relationship between consumer prices excluding taxes and upstream prices in raw levels rather than in

  14. Biological and physiological changes in raw and radiation-processed legumes

    International Nuclear Information System (INIS)

    El Wakeil, F.A.; Sharabash, M.T.M.; Farag, M. Diaa El-Din H.; Mahrous, S.R.

    1994-01-01

    Body weight of rats fed on raw kidney beans, soybeans, broad beans, chick peas and lupines suffered from poor growth due to some antinutritional factors. When the studied legumes were exposed to 10 kGy, the rats gained more weight than those kept on raw legumes. When extracts of raw legumes were intraperitoneally injected, the LD 50 were found to be 125, 300 and 1800 mg/kg, for raw kidney beans, raw soybeans, and raw broad beans respectively. However, injecting extracts of raw chick peas and raw lupines did not kill the rats even at higher concentration levels of 3000 mg/kg. Similar results were obtained with irradiated chick peas and lupines (10 kGy). Meanwhile, after irradiation treatment of kidney beans, soybeans and broad beans, the LD 50 were found to be 250, 400 and 2000 mg/kg for the above pulses respectively. Both raw and irradiated kidney beans and raw soybeans were most active in stimulating pancreas and liver growth and reducing spleen weight. Irradiated soybeans showed a moderate but significant increase in liver weight only. However, rats fed on both raw and irradiated broad beans, chick peas and lupines in their diets did not suffer any pancreatic and liver hypertrophy or spleen atrophy. The haematological parameters investigated showed that there was no significant differences between rat groups fed on either raw or irradiated legumes. It could be concluded that irradiation offers a good treatment for legumes as it has a beneficial effect to correct the poor growth for rats fed on raw beans during experimental period without any deleterious physiological effects. (author)

  15. Determination of the uranium concentration in samples of raw, retorted and spent shale from Irati, Parana-Brazil, by the fission track registration technique

    International Nuclear Information System (INIS)

    Cabral, R.G.

    1981-02-01

    The feasibility of the determination of uranium in oil shale, by the fission track registration technique is studied. The wet and dry methods were employed, using a Bayer policarbonate, Makrofol KG, as detector. It was created a new variant of the dry method. The fission track registration technique was used in samples of raw, retorted and spent shale from Irati, Parana in Brazil, 16 μg U/g, 20 μg U/g and 20μg U/g were found, respectively, with a total error ranging from 19% to 20%. Some experimental results were included for illustration and comparison. The feasibility of the determination of uranium in oil shale from Irati was verified. (Author) [pt

  16. [Main Components of Xinjiang Lavender Essential Oil Determined by Partial Least Squares and Near Infrared Spectroscopy].

    Science.gov (United States)

    Liao, Xiang; Wang, Qing; Fu, Ji-hong; Tang, Jun

    2015-09-01

    This work was undertaken to establish a quantitative analysis model which can rapid determinate the content of linalool, linalyl acetate of Xinjiang lavender essential oil. Totally 165 lavender essential oil samples were measured by using near infrared absorption spectrum (NIR), after analyzing the near infrared spectral absorption peaks of all samples, lavender essential oil have abundant chemical information and the interference of random noise may be relatively low on the spectral intervals of 7100~4500 cm(-1). Thus, the PLS models was constructed by using this interval for further analysis. 8 abnormal samples were eliminated. Through the clustering method, 157 lavender essential oil samples were divided into 105 calibration set samples and 52 validation set samples. Gas chromatography mass spectrometry (GC-MS) was used as a tool to determine the content of linalool and linalyl acetate in lavender essential oil. Then the matrix was established with the GC-MS raw data of two compounds in combination with the original NIR data. In order to optimize the model, different pretreatment methods were used to preprocess the raw NIR spectral to contrast the spectral filtering effect, after analysizing the quantitative model results of linalool and linalyl acetate, the root mean square error prediction (RMSEP) of orthogonal signal transformation (OSC) was 0.226, 0.558, spectrally, it was the optimum pretreatment method. In addition, forward interval partial least squares (FiPLS) method was used to exclude the wavelength points which has nothing to do with determination composition or present nonlinear correlation, finally 8 spectral intervals totally 160 wavelength points were obtained as the dataset. Combining the data sets which have optimized by OSC-FiPLS with partial least squares (PLS) to establish a rapid quantitative analysis model for determining the content of linalool and linalyl acetate in Xinjiang lavender essential oil, numbers of hidden variables of two

  17. Strategic raw materials. Risk management; Strategische Rohstoffe. Risikovorsorge

    Energy Technology Data Exchange (ETDEWEB)

    Bertau, Martin [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Technische Chemie; Gutzmer, Jens [Helmholtz-Institut fuer Ressourcentechnologie Freiberg (Germany); Matschullat, Joerg (ed.) [Technische Univ. Bergakademie Freiberg (Germany). Interdisziplinaeres Oekologisches Zentrum (IOeZ); Kausch, Peter

    2014-07-01

    This volume is divided into four chapters: (1) Raw material management, (2) Primary raw materials, (3) Secondary raw materials and recycling, (4). Processing and products. The topics for the chapter ''Raw material management'' are: Substitution of raw materials - framework conditions and implementation; Thales: Strategic raw materials; Time for cooperation between the EU and China in raw materials policy; Availability of elements for the semiconductor industry; Market price risks of raw material-intensive companies - identification and management. The topics on the second item ''Primary raw materials'' are: The supply of economic-critical raw materials - A search and analysis for causes; Lithium extraction from primary raw materials - state and perspectives; The global market of rare earths - A balancing act; Rare earth deposits in Namibia; New technologies in exploration and discovery - Focus on activities in Europe. The third chapter, ''Secondary Raw Materials and Recycling'', covered the topics: Technology metals - Systemic Requirements along the recycling chain; Integrated re-use of high-tech and greentech wastes; From the sewage sludge ash to the phosphorus fertilizer RecoPhos P38 in the stress field of waste, fertilizer and soil protection. In chapter 4. ''Processing and products'' are the topics: Treatment and processing of rare earth metals; Processing of mineral resources - opportunities and challenges; Consequences of modern germanium chemistry; Strategic resources - Risk management. A review and outlook with a pinch of fantasy.. [German] Dieser Band gliedert sich in vier Kapitel: (1) Rohstoffwirtschaft, (2) Primaere Rohstoffe, (3) Sekundaere Rohstoffe und Recycling,(4). Verarbeitung und Produkte. Die Themen zum Kapitel ''Rohstoffwirtschaft'' sind: Substitution von Rohstoffen - Rahmenbedingungen und Umsetzung; Thales: Strategische Rohstoffe; Zeit fuer

  18. Approaches of Russian oil companies to optimal capital structure

    Science.gov (United States)

    Ishuk, T.; Ulyanova, O.; Savchitz, V.

    2015-11-01

    Oil companies play a vital role in Russian economy. Demand for hydrocarbon products will be increasing for the nearest decades simultaneously with the population growth and social needs. Change of raw-material orientation of Russian economy and the transition to the innovative way of the development do not exclude the development of oil industry in future. Moreover, society believes that this sector must bring the Russian economy on to the road of innovative development due to neo-industrialization. To achieve this, the government power as well as capital management of companies are required. To make their optimal capital structure, it is necessary to minimize the capital cost, decrease definite risks under existing limits, and maximize profitability. The capital structure analysis of Russian and foreign oil companies shows different approaches, reasons, as well as conditions and, consequently, equity capital and debt capital relationship and their cost, which demands the effective capital management strategy.

  19. Maintenance of carbohydrate transport in tall trees

    DEFF Research Database (Denmark)

    Savage, Jessica A.; Beecher, Sierra D.; Clerx, Laura

    2017-01-01

    Trees present a critical challenge to long-distance transport because as a tree grows in height and the transport pathway increases in length, the hydraulic resistance of the vascular tissue should increase. This has led many to question whether trees can rely on a passive transport mechanism to ...... that reduce transport resistance. As a result, the key to the long-standing mystery of how trees maintain phloem transport as they increase in size lies in the structure of the phloem and its ability to change hydraulic properties with plant height.......Trees present a critical challenge to long-distance transport because as a tree grows in height and the transport pathway increases in length, the hydraulic resistance of the vascular tissue should increase. This has led many to question whether trees can rely on a passive transport mechanism...... in the leaves of a tall tree in situ. Across nine deciduous species, we find that hydraulic resistance in the phloem scales inversely with plant height because of a shift in sieve element structure along the length of individual trees. This scaling relationship seems robust across multiple species despite large...

  20. Treatment and conditioning of solid and liquid raw

    International Nuclear Information System (INIS)

    Jakubec, R.

    2015-01-01

    Jadrova a vyradovacia spolocnost, a.s. (JAVYS) implements activities within the processes of treatment and conditioning of radioactive waste (RAW) at two nuclear facilities, one of them located in Bohunice - Technologies for treatment and conditioning of RAW. This nuclear facility includes: Bohunice RAW treatment centre, bituminization lines, waste water purification station and technologies for sorting, fragmentation and decontamination of metallic RAW. The Bohunice RAW treatment centre (BRTC) in Bohunice processes and conditions liquid and solid radioactive waste produced during the A1 NPP and V1 NPP decommissioning, waste from the operation of V2 NPP in Bohunice as well as from the operation of NPP EMO 1,2 in Mochovce. The BRTC includes the following technological facilities: sorting, high-pressure compaction, incineration, concentration and cementation. Treatment of radioactive wastes in the BRTC is described. (authors)

  1. Mineralogy and rheology of raw and activated Turonian to Coniacian clays from Benue Trough, northeastern Nigeria

    Directory of Open Access Journals (Sweden)

    A.S. Arabi

    2018-03-01

    Full Text Available Since the discovery of oil and gas in Oloibiri, an onshore oilfield located in Oloibiri in Ogbia Local Government Area of Bayelsa State, Nigeria on Sunday 15th January 1956 by Shell Darcy, hundreds of oil wells have been drilled and not a single of these oil wells was drilled without the use of bentonite. This work is aimed at evaluating the rheological properties of raw and beneficiated Nigerian clays to ascertain their worth for use as drilling mud in oil and gas well drilling. This will save foreign earnings used in the importation of bentonite by the oil and gas development companies, create employment opportunity and open a new frontier for solid mineral development. Five clay samples from Pindiga Formation in Benue Trough, northeastern Nigeria were collected and subjected to elemental, rheological and other physical properties tests and analysis, while another portion of same samples were beneficiated using sodium carbonate, gum Arabic and poly-anionic cellulose for rheological enhancement then subjected to same cycle of tests and analysis above. Results obtained indicates that wet beneficiation as adopted in this study has proved to be more effective in Ca and Na ionic exchange. The rheological and other physical properties of the clays attained the standard that is required for use in oil and gas well drilling after addition of 12% sodium carbonate and 1.5 g poly-anionic cellulose. It was also discovered that when the formulation was allow to age (stay for 24 h, it attained optimum rheological requirement with 12% sodium carbonate and just 0.8 g poly-anionic cellulose. The clays studies do not require addition of weighing additive such as barite because of their high iron content which made their density attain the require standard even without additives. Keywords: Bentonitic clay, Beneficiation, Nigeria, Pindiga, Rheology, Mineralogy

  2. Castor oil biodiesel: an economic evaluation; Biodiesel de mamona: uma avaliacao economica

    Energy Technology Data Exchange (ETDEWEB)

    Pires, Monica de Moura; Alves, Jaenes Miranda; Almeida Neto, Jose Adolfo de; Almeida, Cezar Menezes; Sousa, Geovania Silva de; Cruz, Rosenira Serpa da; Monteiro, Renata; Lopes, Beatriz Sampaio; Robra, Sabine [Universidade Estadual de Santa Cruz, Ilheus, BA (Brazil). Grupo Bioenergia e Meio Ambiente]. E-mails: mpires@uesc.br; jaenes@uesc.br; jalmeida@uesc.br; roserpa@uesc.br

    2004-07-01

    The production cost of castor oil biodiesel by methyl way and its economic viability, using as reference the production cost data of castor oil and the implantation of the pilot plant at UESC - state university of Santa Cruz, Bahia State, Brazil was determined. From this information, it was seen that the estimated price of castor oil biodiesel is close to the diesel price in the Itabuna market, Bahia state, Brazil. The indicators show economic viability of the mini-power plant installation. Such information are preliminary estimative for the market and can be modified as function of changes in the main factors used to have the production costs, as well as the sectorial policies that drives the activity as much in levels of raw material production as in biodiesel.

  3. OZONE ABSORPTION IN RAW WATERS

    Directory of Open Access Journals (Sweden)

    LJILJANA TAKIĆ

    2008-03-01

    Full Text Available The ozone absorption in raw water entering the main ozonization step at the Belgrade drinking water supply plant was investigated in a continuous stirred tank reactor (CSTR. A slow chemical reaction rate of dissolved ozone and pollutants present in raw water have been experimentally determined. The modified Hatta number was defined and calculated as a criterion which determines whether and to which extent the reactions of ozone and pollutants influence the rate of the pure physical ozone absorption.

  4. Cress oil modulates radiation-induced hormonal, histological, genetic disorders and sperm head abnormalities in albino rat

    International Nuclear Information System (INIS)

    Said, U.Z.; Azab, KH.SH.; Soliman, S.M.

    2005-01-01

    Watercress (Nasturtium officinale) is an aquatic perennial herb of mustard family. The plant is rich in glucosinolates, specially gluconasturtin, which can be hydrolyzed to 2- phenylethyl isothiocyanate (PEITC) and known to activate detoxification enzymes. Cress oil (0.1 ml/kg/day) was given to rats, receiving a standard diet, by gavage for 2 weeks before whole body gamma irradiation at 7 Gy (single dose) and treatment was continued one week after irradiation. The results obtained showed that cress oil treatment significantly diminished the radiation-induced alterations in levels of testosterone, luteinizing hormone (LH), follicle stimulating hormone (FSH) and prolactin in serum and also blunted the increased levels of thiobarbituric acid reactive substances (TBARS) in serum and testes. Histopathological examination of testicular tissue showed that radiation exposure leads to atrophic testis with marked loss of germ cells, remaining tall pink Sertoli cells, peri tubular fibrosis and interstitial fibrosis. Cress oil treatments ameliorated the intensity of these changes where signs of partial recovery were observed in the histological configuration of leydig cells, seminiferous tubules, spermatocytes and in the structure of interstitial cells. Moreover, administration of cress oil significantly reduced the score of sperm head abnormalities and chromosomal aberration frequencies. It could be concluded that watercress may have a bio protective effect on radiation-induced oxidative stress where phytochemicals present in watercress could protect against hormone-dependent disease

  5. A Simple Refining Technique of Coconut Oil for Small Holder Industries

    Directory of Open Access Journals (Sweden)

    Sugeng Triyono

    2009-04-01

    Full Text Available A simple refining equipment and process for small holder industries of edible coconut oil has beeninvestigated. The equipment consisted of 20-L filtering and NaOH neutralization bottles. Filtration wasintended to remove impurities such as gums and pigment, while neutralization was to remove free fattyacids (FFA and other non-fat materials. In the experiment, the crude coconut oil was found to have impurityof 0.16%, FFA of 8.02%, saponification number of 270, and water content of 0.33%. The results showed thateither granular activated carbon (GAC or zeolite filtration can be chosen individually to remove physicalimpurity. The GAC or zeolite-filtered coconut oil contained impurity less than the SNI standard of 0.05%.In term of FFA; however, the NaOH neutralized coconut oil did not meet the SNI standard of 0.3%. AfterNaOH neutralization, the GAC filtered oil contained 1.20% FFA; while the zeolite filtered oil contained1.32%. These FFA contents were definitely higher than the SNI standard, but could satisfy APCC standardfor grade IV coconut oil which is 5%. The refined coconut oils could also satisfy the SNI standard ofsaponification number which is 196 – 206 at minimum. In term of water content, either the filtered or theneutralized oil could also satisfy the SNI standard of 0.3%. In short, the proposed technique could helpfarmers refine their raw coconut oil, and hopefully improve its marketability.

  6. Benefits of balancing method for component RAW importance measure

    International Nuclear Information System (INIS)

    Kim, Kil Yoo; Yang, Joon Eon

    2005-01-01

    In the Risk Informed Regulation and Applications (RIR and A), the determination of risk significant Structure, System and Components (SSCs) plays an important role, and importance measures such as Fussell-Vesely (FV) and RAW (Risk Achievement Worth) are widely used in the determination of risk significant SSCs. For example, in the Maintenance Rule, Graded Quality Assurance(GQA) and Option 2, FV and RAW are used in the categorization of SSCs. Especially, in the GQA and Option 2, the number of SSCs to be categorized is too many to handle, so the FVs and RAWs of the components are practically derived in a convenient way with those of the basic events which have already been acquired as PSA (Probabilistic Safety Assessment) results instead of by reevaluating the fault tree/event tree of the PSA model. That is, the group FVs and RAWs for the components are derived from the FVs and RAWs of the basic events which consist of the group. Here, the basic events include random failure, Common Cause Failure (CCF), test and maintenance, etc. which make the system unavailable. A method called 'Balancing Method' which can practically and correctly derive the component RAW with the basic event FVs and RAWs even if CCFs exists as basic events was introduced in Ref.. However, 'Balancing Method' has other advantage, i.e., it can also fairly correctly derive component RAW using fault tree without using basic events FVs and RAWs

  7. Process simulation and economic analysis of biodiesel production from waste cooking oil with membrane bioreactor

    Science.gov (United States)

    Abdurakhman, Yuanita Budiman; Putra, Zulfan Adi; Bilad, Muhammad Roil

    2017-10-01

    Pollution and shortage of clean energy supply are among major problems that are caused by rapid population growth. Due to this growth, waste cooking oil is one of the pollution sources. On the other hand, biodiesel appears to be one of the most promising and feasible energy sources as it emits less toxic pollutants and greenhouse gases than petroleum diesel. Thus, biodiesel production using waste cooking oil offers a two-in-one solution to cater pollution and energy issues. However, the conventional biodiesel production process using homogeneous base catalyst and stirred tank reactor is unable to produce high purity of biodiesel from waste cooking oil. It is due its sensitivity to free fatty acid (FFA) content in waste cooking oil and purification difficulties. Therefore, biodiesel production using heterogeneous acid catalyst in membrane reactor is suggested. The product of this process is fatty acid methyl esters (FAME) or biodiesel with glycerol as by-product. This project is aimed to study techno-economic feasibility of biodiesel production from waste cooking oil via heterogeneous acid catalyst in membrane reactor. Aspen HYSYS is used to accomplish this aim. Several cases, such as considering different residence times and the production of pharmaceutical (USP) grade glycerol, are evaluated and compared. Economic potential of these cases is calculated by considering capital expenditure, utilities cost, product and by-product sales, as well as raw material costs. Waste cooking oil, inorganic pressure-driven membrane and WAl is used as raw material, type of membrane and heterogeneous acid catalyst respectively. Based on literature data, FAME yield formulation is developed and used in the reactor simulation. Simulation results shows that economic potential increases by 30% if pharmaceutical (USP) grade glycerol is produced regardless the residence time of the reactor. In addition, there is no significant effect of residence time on the economic potential.

  8. Oil and gas business in changing times

    Directory of Open Access Journals (Sweden)

    Brasoveanu Sergiu

    2017-07-01

    Full Text Available The top 5 oil majors (British Petroleum, ExxonMobil, Total, Chevron and Royal Dutch Shell are analyzed in terms of investments, earnings and financial & operational performance along the entire business value chain, for a period of 5 years. One of the key objectives is to understand how the Upstream and Downstream segments may play different roles in the definition of a winning corporate strategy, considering how they may reveal very different strengths and weaknesses during crude oil price crises. When the crude oil price goes down, the upstream sector is running big cost cutting measures, in order to reduce expenditures and keep acceptable gross margins per barrel of oil equivalent. On the other hand, the downstream segment receives cheaper raw material without a significant decrease in the final price of the oil products. Thus, how can oil companies leverage this flexibility in order to pass successfully through periods of crude oil price slides, and even take advantage of those? The paper aims to analyze the correlation between oil price and oil volume produced on one hand, and investments and earnings, split by business segments, on the other hand. The variation of investment and earnings is hence compared to crude oil price fluctuations for a clearer picture of the business profitability per segment during the peak and bottom periods of the oil market. Upstream and Downstream segments are also benchmarked against each other to understand the role that each of them is playing in the industry. The results are expected to provide some trend lines to understand how much the cost cutting measures are impacting the overall business, as well as to appreciate whether the reduction in the oil production, which in theory should be followed by a rise in prices, is indeed in the best interest of the oil majors. Going further into analysis, the paper is trying to define an optimum production interval, that will maximize profits along the entire value

  9. Hurricane Andrew causes major oil spill at Florida Power ampersand Light Company's Turkey Point Power Plant, Homestead, Florida

    International Nuclear Information System (INIS)

    Jones, M.A.; Butts, R.L.; Lindsay, J.R.; McCully, B.S.; Pickering, T.H.

    1993-01-01

    On August 24, 1992, Hurricane Andrew slammed into South Florida with wind gusts in excess of 160 mph. At 4:00 a.m. that day, the eye of this category four storm passed over Florida Power ampersand Light Company's Turkey Point power plant, south of Miami. Although the plant's two nuclear units escaped any significant damage, the storm caused extensive destruction to buildings and transmission facilities, and damaged two 400 foot tall emission stacks associated with the site's two fossil fuel generating units. In addition, a 90,000 to 110,000 gallon spill of No. 6 fuel oil resulted when a piece of wind-blown debris punctured the steel of the unit One 12,000 barrel fuel oil metering tank approximately 30 feet up from the tank bottom. Despite the presence of a secondary containment structure around the tank, the intense wind blew oil throughout the plant site. The damage to the metering tank apparently occurred during the first half hour of the hurricane. As the tank's oil level fell due to the puncture, transfer pumps from the bulk oil storage tanks received a low level alarm which automatically began transferring oil to the damaged metering tank. To prevent the further discharge of oil, plant personnel entered the power block and secured the pumps during the passage of the hurricane eye. Immediately following the storm, facility personnel deployed booms across the barge canal and the Units 1 and 2 intake canal to contain the oil which had entered the water. The response strategy and implementation is described in detail. The remediation costs were approximately $14/gallon spilled, including 54,000 gallons recovered for electricity generation

  10. Central European projects could alter oil movement patterns

    International Nuclear Information System (INIS)

    Deffarges, E.H.; Howard, D.J.; Treat, J.E.

    1991-01-01

    This paper reports that several oil transportation projects are set to transform the flows of oil in Central Europe, with potentially important implications for crude oil and product prices in the region. These projects are spurred by the desires of the newly opened economies of Central Europe to diversify their sources of oil supplies away from the U.S.S.R. and by expectations of economic growth in this region. Today, Central European countries (Poland, Czechoslovakia, Hungary, Yugoslavia, Romania, and Bulgaria) rely heavily on Soviet crude supplies. Of the 1.7 million b/d of crude oil consumed by these six countries, about 55% is imported from the U.S.S.R. This is down significantly from the more than 75% import dependence in the mid-1980s. This dependency on U.S.S.R. crude - for countries that either have a history of indigenous production (Romania) or access to Middle East or North African supplies (Yugoslavia) - testifies to more than 40 years of centrally planned economics in which Moscow provided the energy and raw materials and Central European countries delivered finished goods. Since the end of World War II, the pipeline flow of crude oil and products from Western to Central Europe has been almost nonexistent. In fact, the Western European crude and product pipeline network itself is a rather poorly integrated system, with only limited interconnections between northern and southern networks and no real competition across the major flow routes

  11. SCOR based key success factors in cooking oil supply chain buyers perspective in Padang City

    Science.gov (United States)

    Zahara, Fatimah; Hadiguna, Rika Ampuh

    2017-11-01

    Supply chain of cooking oil is a network of companies from palm oil as raw material to retailers which work to create the value and deliver products into the end consumers. This paper is aimed to study key success factors based on consumer's perspective as the last stage in the supply chain. Consumers who are examined in this study are restaurants management or owners. Restaurant is the biggest consumption of cooking oil. The factors is studied based on Supply Chain Operation Reference (SCOR) version 10.0. Factors used are formulated based on the third-level metrics of SCOR Model. Factors are analyzed using factors analysis. This study found factors which become key success factors in managing supply chain of cooking oil encompass reliability, responsiveness and agility. Key success factors can be applied by governments as policy making and cooking oil companies as formulation of the distribution strategies.

  12. Evaluation of ozone injury on foliage of black cherry (Prunus serotina) and tall milkweed (Asclepias exaltata) in Great Smoky Mountains National Park.

    Science.gov (United States)

    Chappelka, A; Renfro, J; Somers, G; Nash, B

    1997-01-01

    The incidence and severity of visible foliar ozone injury on black cherry (Prunus serotina) seedlings and saplings and tall milkweed (Asclepias exaltata) plants in Great Smoky Mountains National Park (GRSM) were determined by surveys along selected trails conducted during late summer 1992. The incidence (% injured plants) of ozone injury on black cherry was 47% and the percent injured leaves/injured plant and average leaf area injured were 43 and 6%, respectively. Maximum severity (avg. leaf area of the most severely injured leaf) was 12%. Black cherry seedlings and saplings exhibiting ozone injury were taller than non-injured plants. When insect feeding was present, it occurred 96% of the time on plants with ozone injury. Significantly more injury (p=0.007) on black cherry (% injured leaves/injured black cherry) occurred in the NW section of GRSM compared with the other Park sections. Regression analyses showed no relationships in ozone injury with respect to aspect, slope or elevation. Tall milkweed was evaluated twice during August for ozone injury. The incidence (% injured plants) of ozone injury was 74 and 79% for the first and second survey, respectively. The percentage of injured leaves per plant from the first to second survey was 63 to 79%, respectively. Tall milkweeds showing ozone injury were taller than the non-injured plants. The percentage of insect-damaged plants was 50% among plants without ozone injury and 60% among ozone-injured plants. Non-injured tall milkweed had fewer flowers and/or pods than the injured plants. Mean leaf area injured increased over time, and mean maximum leaf area injured increased from 8 to 11% during the same period. Regression analyses showed no differences in ozone injury regarding aspect, slope or elevation. Our findings indicate that ozone injury is widespread throughout the Park on sensitive vegetation.

  13. Overturning to the oil sector

    International Nuclear Information System (INIS)

    Valenzuela, Luis Carlos

    1999-01-01

    In only 11 months, the Mines and Energy Sector, especially with concerning to oil politics and to Ecopetrol it has given a total overturn, not only new economic conditions settled down to attract investment in the sector, the politics advanced in the activation of the environmental licenses and the consultations with the community. As for Ecopetrol bottom changes were made that guarantee their passive of pensions, disabling this way a fiscal bomb and the countable system was changed that will make that Ecopetrol counts the raw as a capitalization on the part of the Colombians guaranteeing an appropriate return to the petroleum that is given in administration

  14. Ethanol is a strategic raw material

    Directory of Open Access Journals (Sweden)

    Baras Josip K.

    2002-01-01

    Full Text Available The first part of this review article considers general data about ethanol as an industrial product, its qualities and uses. It is emphasized that, if produced from biomass as a renewable raw material, its perspectives as a chemical raw material and energent are brilliant. Starchy grains, such as corn, must be used as the main raw materials for ethanol production. The production of bioethanol by the enzyme-catalyzed conversion of starch followed by (yeast fermentation, distillation is the process of choice. If used as a motor fuel, anhydrous ethanol can be directly blended with gasoline or converted into an oxygenator such as ETBE. Finally, bioethanol production in Yugoslavia and the possibilities for its further development are discussed.

  15. Optimized production of biodiesel from waste cooking oil by lipase immobilized on magnetic nanoparticles.

    Science.gov (United States)

    Yu, Chi-Yang; Huang, Liang-Yu; Kuan, I-Ching; Lee, Shiow-Ling

    2013-12-11

    Biodiesel, a non-toxic and biodegradable fuel, has recently become a major source of renewable alternative fuels. Utilization of lipase as a biocatalyst to produce biodiesel has advantages over common alkaline catalysts such as mild reaction conditions, easy product separation, and use of waste cooking oil as raw material. In this study, Pseudomonas cepacia lipase immobilized onto magnetic nanoparticles (MNP) was used for biodiesel production from waste cooking oil. The optimal dosage of lipase-bound MNP was 40% (w/w of oil) and there was little difference between stepwise addition of methanol at 12 h- and 24 h-intervals. Reaction temperature, substrate molar ratio (methanol/oil), and water content (w/w of oil) were optimized using response surface methodology (RSM). The optimal reaction conditions were 44.2 °C, substrate molar ratio of 5.2, and water content of 12.5%. The predicted and experimental molar conversions of fatty acid methyl esters (FAME) were 80% and 79%, respectively.

  16. Alternative castor oil-based polyurethane adhesive used in the production of plywood

    Directory of Open Access Journals (Sweden)

    Fabricio Moura Dias

    2004-09-01

    Full Text Available Plywood is normally produced with urea-formaldehyde and/or phenol-formaldehyde adhesives. However, the former is considerably toxic and environmentally damaging, while the latter is expensive, thus motivating the search for alternative raw materials in plywood production. The castor oil-based polyurethane adhesive developed at the São Carlos Institute of Chemistry, University of São Paulo, is an environmentally friendly vegetal oil-based polymer that is harmless to humans. The wood species Eucalyptus grandis offers favorable properties for plywood the manufacture. The study reported on here involved the use of castor oil-based polyurethane adhesive to produce plywood with Eucalyptus grandis layers. The plywood's performance was evaluated based on the results of physical and mechanical tests recommended by the Brazilian code, ABNT. Tests results showed higher values than those reported in the literature and recommended by the ABNT, indicating that the castor oil-based polyurethane adhesive is a promising glue for the manufacture of plywood.

  17. Degradation of hydrocarbons in crude oil by the ascomycete Pseudallescheria boydii (Microascaceae)

    International Nuclear Information System (INIS)

    April, T. M.; Abbott, S. P.; Foght, J. M.; Currah, R. S.

    1998-01-01

    Four strains of Pseudallescheria boydii were isolated from oil-soaked soils in British Columbia and Alberta and compared with strains from cattle dung and raw sewage. Variations in morphology, colony appearance, colony diameter and temperature tolerance were found among the strains. Three of the strains isolated from oil-contaminated soils and the strain from sewage were tested for their ability to utilize hydrocarbons as the sole carbon source. Gas chromatographic analysis of the residual oil revealed that the strains isolated from the oil-contaminated soil degraded the linear aliphatics. The strain derived from sewage utilized volatile n-alkenes (ethane, propane, butane) but did not utilize the liquid saturate compounds. Since certain strains of Pseudallescheria boydii are known to be pathogenic, cautious handling of these fungi was recommended. However, under properly controlled conditions, selected non-pathogenic strains of the fungi may be used as an integral and effective part of intrinsic bioremediation processes. 39 refs., 3 tabs., 7 figs

  18. Use of Near-Infrared Spectroscopy and Chemometrics for the Nondestructive Identification of Concealed Damage in Raw Almonds (Prunus dulcis).

    Science.gov (United States)

    Rogel-Castillo, Cristian; Boulton, Roger; Opastpongkarn, Arunwong; Huang, Guangwei; Mitchell, Alyson E

    2016-07-27

    Concealed damage (CD) is defined as a brown discoloration of the kernel interior (nutmeat) that appears only after moderate to high heat treatment (e.g., blanching, drying, roasting, etc.). Raw almonds with CD have no visible defects before heat treatment. Currently, there are no screening methods available for detecting CD in raw almonds. Herein, the feasibility of using near-infrared (NIR) spectroscopy between 1125 and 2153 nm for the detection of CD in almonds is demonstrated. Almond kernels with CD have less NIR absorbance in the region related with oil, protein, and carbohydrates. With the use of partial least squares discriminant analysis (PLS-DA) and selection of specific wavelengths, three classification models were developed. The calibration models have false-positive and false-negative error rates ranging between 12.4 and 16.1% and between 10.6 and 17.2%, respectively. The percent error rates ranged between 8.2 and 9.2%. Second-derivative preprocessing of the selected wavelength resulted in the most robust predictive model.

  19. VERAM - Vision and Roadmap for European Raw Materials

    Science.gov (United States)

    Baumgarten, Wibke; Vashev, Boris

    2017-04-01

    The overall objective of VERAM project is to produce a Vision and Roadmap for European Raw Materials in 2050 based on raw materials research and innovation (R&I) coordination. Two leading European Technology Platforms (ETPs): ETP SMR (Sustainable Minerals Resources) and FTP (Forest Technology Platform) are joining forces to develop a common vison and roadmap with the support of ECTP (European Construction Technology Platform), represented by UNIVPM, SusChem (ETP for Sustainable Chemistry), represented by Cefic, EuMaT (Advanced Materials ETP), represented by VITO, ERAMIN 2, represented by Research Centre JUELICH and WoodWisdom Network Plus represented by the Agency for Renewable Resources (FNR). This partnership provides VERAM with expertise from downstream applications and additional knowledge on non-biotic and biotic raw materials. The project encourages capacity building as well as transfer of knowledge. It expects to provide an innovation reference point for the European Institute of Innovation & Technology (EIT) Raw Materials (formerly the KIC Raw MatTERS), to coordinate the network involved in the European Innovation Partnership (EIP) on Raw Materials Commitments and relevant proposals funded under Horizon 2020. It provides a platform for identifying gaps and complementarities and enables their bridging. VERAM will be able to advise the European Commission and Member States on future research needs and policies to stimulate innovation and assist in overcoming fragmentation in the implementing the EIP Raw Materials Strategic Implementation Plan. VERAM looks for mutually beneficial information exchange, encourages cross-fertilization between actions undertaken by different raw material industries, and expects to accelerate exploitation of breakthrough innovations. One of the main outcomes of the project is the presentation of a common long term 2050 Vision and Roadmap for relevant raw materials including metals, industrial minerals and aggregates and wood. The

  20. Future strategies for oil shale development as a new indigenous energy resource in Jordan

    International Nuclear Information System (INIS)

    Jaber, J.O.; Tarawneh, T.

    2011-01-01

    Indigenous oil shale deposits could satisfy Jordan's demand for liquid and gaseous fuels as well as electricity for many centuries. Markets also exist for raw and retorted oil shale, spent shale, and for sulfur recovered during the upgrading and refining of crude shale oil. Although the potential benefits of oil shale development are substantial, complex and expensive facilities would be required, and these have serious economic, environmental, and social implications for the Kingdom and its people. In January 2006, the United States Trade and Development Agency (USTDA) awarded a grant to the Jordanian Ministry of Planning and International Cooperation to support the analysis of current oil shale processing technologies and the application of international expertise to the development of a oil shale industry in Jordan. The goal of the technical assistance project was to help the Government of Jordan (GoJ) establish short and long-term strategies for oil shale development and to facilitate the commercial production of shale oil in the country. This paper discusses the results of the project. The Kingdom's current energy situation and its previous work on oil shale are summarized, and the incentives and restraints on oil shale commercialization are described. Impediments to development are identified, and possible governmental responses are assessed. (author)