Plasticity of maritime pine (Pinus pinaster) wood-forming tissues during a growing season.

Science.gov (United States)

Paiva, J A P; Garnier-Géré, P H; Rodrigues, J C; Alves, A; Santos, S; Graça, J; Le Provost, G; Chaumeil, G; Da Silva-Perez, D; Bosc, A; Fevereiro, P; Plomion, C

2008-01-01

The seasonal effect is the most significant external source of variation affecting vascular cambial activity and the development of newly divided cells, and hence wood properties. Here, the effect of edapho-climatic conditions on the phenotypic and molecular plasticity of differentiating secondary xylem during a growing season was investigated. Wood-forming tissues of maritime pine (Pinus pinaster) were collected from the beginning to the end of the growing season in 2003. Data from examination of fibre morphology, Fourier-transform infrared spectroscopy (FTIR), analytical pyrolysis, and gas chromatography/mass spectrometry (GC/MS) were combined to characterize the samples. Strong variation was observed in response to changes in edapho-climatic conditions. A genomic approach was used to identify genes differentially expressed during this growing season. Out of 3512 studied genes, 19% showed a significant seasonal effect. These genes were clustered into five distinct groups, the largest two representing genes over-expressed in the early- or late-wood-forming tissues, respectively. The other three clusters were characterized by responses to specific edapho-climatic conditions. This work provides new insights into the plasticity of the molecular machinery involved in wood formation, and reveals candidate genes potentially responsible for the phenotypic differences found between early- and late-wood.

[Rapidly-growing nodular pseudoangiomatous stromal hyperplasia of the breast: case report].

Science.gov (United States)

Elıyatkin, Nuket; Karasu, Başak; Selek, Elif; Keçecı, Yavuz; Postaci, Hakan

2011-01-01

Pseudoangiomatous stromal hyperplasia is a benign proliferative lesion of the mammary stroma that rarely presents as a localized mass. Pseudoangiomatous stromal hyperplasia is characterized by a dense, collagenous proliferation of the mammary stroma, associated with capillary-like spaces. Pseudoangiomatous stromal hyperplasia can be mistaken with fibroadenoma on radiological examination or with low-grade angiosarcoma on histological examination. Its main importance is its distinction from angiosarcoma. The presented case was a 40-year-old woman who was admitted with a rapidly growing breast tumor. Physical examination revealed an elastic-firm, well-defined, mobile and painless mass in her right breast. Mammograms revealed a 6.7 x 3.7 cm, lobulated, well-circumscribed mass in her right breast but no calcification. Sonographic examination showed a well-defined and homogenous mass, not including any cyst. Based on these findings, a provisional diagnosis of fibroadenoma was made. Considering the rapid growth history of the mass, tumor excision was performed. The excised tumor was well demarcated and had a smooth external surface. Histological examination revealed the tumor to be composed of markedly increased fibrous stroma and scattered epithelial components (cystic dilatation of the ducts, blunt duct adenosis). The fibrous stroma contained numerous anastomosing slit-like spaces. Isolated spindle cells appeared intermittently at the margins of the spaces resembled endothelial cells. Immunohistochemical staining showed that the spindle cells were positive for CD34 and negative for Factor VIII-related antigen. The lesion was diagnosed as nodular pseudoangiomatous stromal hyperplasia.

Rapid urbanization and the growing threat of violence and conflict: a 21st century crisis.

Science.gov (United States)

Patel, Ronak B; Burkle, Frederick M

2012-04-01

As the global population is concentrated into complex environments, rapid urbanization increases the threat of conflict and insecurity. Many fast-growing cities create conditions of significant disparities in standards of living, which set up a natural environment for conflict over resources. As urban slums become a haven for criminal elements, youth gangs, and the arms trade, they also create insecurity for much of the population. Specific populations, such as women, migrants, and refugees, bear the brunt of this lack of security, with significant impacts on their livelihoods, health, and access to basic services. This lack of security and violence also has great costs to the general population, both economic and social. Cities have increasingly become the battlefield of recent conflicts as they serve as the seats of power and gateways to resources. International agencies, non-governmental organizations, and policy-makers must act to stem this tide of growing urban insecurity. Protecting urban populations and preventing future conflict will require better urban planning, investment in livelihood programs for youth, cooperation with local communities, enhanced policing, and strengthening the capacity of judicial systems.

Semi-solid dosage form of clonazepam for rapid oral mucosal absorption.

Science.gov (United States)

Sakata, Osamu; Machida, Yoshiharu; Onishi, Hiraku

2011-07-01

In order to obtain an alternative to the intravenous (i.v.) dosage form of clonazepam (CZ), an oral droplet formulation of CZ was developed previously; however, the droplet was physically unstable. Therefore, in the present study, it was attempted to develop an easily-handled dosage form, which was more physically stable and allowed rapid drug absorption from oral mucosa. A semi-solid dosage form, composed of polyethylene glycol 1500 (PEG), CZ, and oleic acid (OA) at 37/1/2 (w/w) and named PEG/CZ/OA, and a semi-solid dosage form containing PEG and CZ at 39/1 (w/w), called PEG/CZ, were prepared. Their physical stability in air at room temperature and oral mucosal absorption in rats were investigated. The semi-solid dosage forms were much more stable physically than the droplet, that is, no recrystallization of CZ was observed for at least 8 days. The effective concentration for humans and rats (20 ng/mL or more) was achieved within 30 min after buccal administration for both PEG/CZ/OA and PEG/CZ. The plasma concentration increased gradually and less varied at each time point for PEG/CZ/OA. PEG/CZ/OA was found to show more rapid and higher absorption of CZ in buccal administration than in sublingual administration. Buccal administration with the semi-solid dosage PEG/CZ with or without OA was suggested to be a possibly useful novel dosage form as an alternative to i.v. injection.

Two novel species of rapidly growing mycobacteria: Mycobacterium lehmannii sp. nov. and Mycobacterium neumannii sp. nov.

Science.gov (United States)

Nouioui, Imen; Sangal, Vartul; Carro, Lorena; Teramoto, Kanae; Jando, Marlen; Montero-Calasanz, Maria Del Carmen; Igual, José Mariano; Sutcliffe, Iain; Goodfellow, Michael; Klenk, Hans-Peter

2017-12-01

Two rapidly growing mycobacteria with identical 16S rRNA gene sequences were the subject of a polyphasic taxonomic study. The strains formed a well-supported subclade in the mycobacterial 16S rRNA gene tree and were most closely associated with the type strain of Mycobacterium novocastrense. Single and multilocus sequence analyses based on hsp65, rpoB and 16S rRNA gene sequences showed that strains SN 1900 T and SN 1904 T are phylogenetically distinct but share several chemotaxonomic and phenotypic features that are are consistent with their classification in the genus Mycobacterium. The two strains were distinguished by their different fatty acid and mycolic acid profiles, and by a combination of phenotypic features. The digital DNA-DNA hybridization (dDDH) and average nucleotide identity (ANI) values for strains SN 1900 T and SN 1904 T were 61.0 % and 94.7 %, respectively; in turn, the corresponding dDDH and ANI values with M. novocastrense DSM 44203 T were 41.4 % and 42.8 % and 89.3 % and 89.5 %, respectively. These results show that strains SN1900 T and SN 1904 T form new centres of taxonomic variation within the genus Mycobacterium. Consequently, strains SN 1900 T (40 T =CECT 8763 T =DSM 43219 T ) and SN 1904 T (2409 T =CECT 8766 T =DSM 43532 T ) are considered to represent novel species, for which the names Mycobacteriumlehmannii sp. nov. and Mycobacteriumneumannii sp. nov. are proposed. A strain designated as 'Mycobacteriumacapulsensis' was shown to be a bona fide member of the putative novel species, M. lehmannii.

Rapidly Growing Esophageal Carcinosarcoma Reduced by Neoadjuvant Radiotherapy Alone

Directory of Open Access Journals (Sweden)

Naotaka Ogasawara

2014-06-01

Full Text Available Esophageal carcinosarcoma is a rare malignant neoplasm consisting of both carcinomatous and sarcomatous components. It is generally treated by surgery, radiotherapy and chemotherapy according to the protocols used for other esophageal cancers. However, the treatment of esophageal carcinosarcoma by radiotherapy alone before surgery has not been previously described. We report a patient with a rapidly growing esophageal carcinosarcoma that was efficiently reduced by neoadjuvant radiotherapy alone. A previously healthy 69-year-old man was admitted with dysphagia. Initial esophagogastroduodenoscopy (EGD revealed a small nodular polypoid lesion of about 10 mm in the middle esophagus. A second EGD 1 month later showed that the tumor had expanded into a huge mass. A biopsy specimen revealed that the tumor comprised squamous cell carcinoma with spindle cell components, and the tumor was diagnosed as carcinosarcoma which was diagnosed as stage I (T1bN0M0. Due to renal dysfunction, the patient was treated with neoadjuvant radiotherapy (40 Gy without chemotherapy. A third EGD 1 month later revealed remarkable tumor reduction. He then underwent total esophagectomy with regional lymph node dissection (pStage 0, pT1aN0M0. After surgical operation, the patient was followed up without adjuvant therapy. Whole body computed tomography revealed lung metastasis 14 months after surgery, and the patient died 2 months later. The neoadjuvant radiotherapy for esophageal carcinosarcoma was considered to have contributed to the subsequent surgery and his prolonged survival time. Thus, radiotherapy alone might be a suitable neoadjuvant therapy for esophageal carcinosarcomas.

ISOLATION AND ANTIBIOTIC SUSCEPTIBILITY TESTING OF RAPIDLY-GROWING MYCOBACTERIA FROM GRASSLAND SOILS

Directory of Open Access Journals (Sweden)

Martina Kyselková

2013-08-01

Full Text Available Rapidly growing mycobacteria (RGM are common soil saprophytes, but certain strains cause infections in human and animals. The infections due to RGM have been increasing in past decades and are often difficult to treat. The susceptibility to antibiotics is regularly evaluated in clinical isolates of RGM, but the data on soil RGM are missing. The objectives of this study was to isolate RGM from four grassland soils with different impact of manuring, and assess their resistance to antibiotics and the ability to grow at 37°C and 42°C. Since isolation of RGM from soil is a challenge, a conventional decontamination method (NaOH/malachite green/cycloheximide and a recent method based on olive oil/SDS demulsification were compared. The olive oil/SDS method was less efficient, mainly because of the emulsion instability and plate overgrowing with other bacteria. Altogether, 44 isolates were obtained and 23 representatives of different RGM genotypes were screened. The number of isolates per soil decreased with increasing soil pH, consistently with previous findings that mycobacteria were more abundant in low pH soils. Most of the isolates belonged to the Mycobacterium fortuitum group. The majority of isolates was resistant to 2-4 antibiotics. Multiresistant strains occurred also in a control soil that has a long history without the exposure to antibiotic-containing manure. Seven isolates grew at 37°C, including the species M. septicum and M. fortuitum known for infections in humans. This study shows that multiresistant RGM close to known human pathogens occur in grassland soils regardless the soil history of manuring.

Nosocomial rapidly growing mycobacterial infections following laparoscopic surgery: CT imaging findings

Energy Technology Data Exchange (ETDEWEB)

Volpato, Richard [Cassiano Antonio de Moraes University Hospital, Department of Diagnostic Radiology, Vitoria, ES (Brazil); Campi de Castro, Claudio [University of Sao Paulo Medical School, Department of Radiology, Cerqueira Cesar, Sao Paulo (Brazil); Hadad, David Jamil [Cassiano Antonio de Moraes University Hospital, Nucleo de Doencas Infecciosas, Department of Internal Medicine, Vitoria, ES (Brazil); Silva Souza Ribeiro, Flavya da [Laboratorio de Patologia PAT, Department of Diagnostic Radiology, Unit 1473, Vitoria, ES (Brazil); Filho, Ezequiel Leal [UNIMED Diagnostico, Department of Diagnostic Radiology, Unit 1473, Vitoria, ES (Brazil); Marcal, Leonardo P. [The University of Texas M D Anderson Cancer Center, Department of Diagnostic Radiology, Unit 1473, Houston, TX (United States)

2015-09-15

To identify the distribution and frequency of computed tomography (CT) findings in patients with nosocomial rapidly growing mycobacterial (RGM) infection after laparoscopic surgery. A descriptive retrospective study in patients with RGM infection after laparoscopic surgery who underwent CT imaging prior to initiation of therapy. The images were analyzed by two radiologists in consensus, who evaluated the skin/subcutaneous tissues, the abdominal wall, and intraperitoneal region separately. The patterns of involvement were tabulated as: densification, collections, nodules (≥1.0 cm), small nodules (<1.0 cm), pseudocavitated nodules, and small pseudocavitated nodules. Twenty-six patients met the established criteria. The subcutaneous findings were: densification (88.5 %), small nodules (61.5 %), small pseudocavitated nodules (23.1 %), nodules (38.5 %), pseudocavitated nodules (15.4 %), and collections (26.9 %). The findings in the abdominal wall were: densification (61.5 %), pseudocavitated nodules (3.8 %), and collections (15.4 %). The intraperitoneal findings were: densification (46.1 %), small nodules (42.3 %), nodules (15.4 %), and collections (11.5 %). Subcutaneous CT findings in descending order of frequency were: densification, small nodules, nodules, small pseudocavitated nodules, pseudocavitated nodules, and collections. The musculo-fascial plane CT findings were: densification, collections, and pseudocavitated nodules. The intraperitoneal CT findings were: densification, small nodules, nodules, and collections. (orig.)

Nosocomial rapidly growing mycobacterial infections following laparoscopic surgery: CT imaging findings

International Nuclear Information System (INIS)

Volpato, Richard; Campi de Castro, Claudio; Hadad, David Jamil; Silva Souza Ribeiro, Flavya da; Filho, Ezequiel Leal; Marcal, Leonardo P.

2015-01-01

To identify the distribution and frequency of computed tomography (CT) findings in patients with nosocomial rapidly growing mycobacterial (RGM) infection after laparoscopic surgery. A descriptive retrospective study in patients with RGM infection after laparoscopic surgery who underwent CT imaging prior to initiation of therapy. The images were analyzed by two radiologists in consensus, who evaluated the skin/subcutaneous tissues, the abdominal wall, and intraperitoneal region separately. The patterns of involvement were tabulated as: densification, collections, nodules (≥1.0 cm), small nodules (<1.0 cm), pseudocavitated nodules, and small pseudocavitated nodules. Twenty-six patients met the established criteria. The subcutaneous findings were: densification (88.5 %), small nodules (61.5 %), small pseudocavitated nodules (23.1 %), nodules (38.5 %), pseudocavitated nodules (15.4 %), and collections (26.9 %). The findings in the abdominal wall were: densification (61.5 %), pseudocavitated nodules (3.8 %), and collections (15.4 %). The intraperitoneal findings were: densification (46.1 %), small nodules (42.3 %), nodules (15.4 %), and collections (11.5 %). Subcutaneous CT findings in descending order of frequency were: densification, small nodules, nodules, small pseudocavitated nodules, pseudocavitated nodules, and collections. The musculo-fascial plane CT findings were: densification, collections, and pseudocavitated nodules. The intraperitoneal CT findings were: densification, small nodules, nodules, and collections. (orig.)

The spatial biology of transcription and translation in rapidly growing Escherichia coli

Directory of Open Access Journals (Sweden)

Somenath eBakshi

2015-07-01

Full Text Available Single-molecule fluorescence provides high resolution spatial distributions of ribosomes and RNA polymerase (RNAP in live, rapidly growing E. coli. Ribosomes are more strongly segregated from the nucleoids (chromosomal DNA than previous widefield fluorescence studies suggested. While most transcription may be co-translational, the evidence indicates that most translation occurs on free mRNA copies that have diffused from the nucleoids to a ribosome-rich region. Analysis of time-resolved images of the nucleoid spatial distribution after treatment with the transcription-halting drug rifampicin and the translation-halting drug chloramphenicol shows that both drugs cause nucleoid contraction on the 0-3 min timescale. This is consistent with the transertion hypothesis. We suggest that the longer-term (20-30 min nucleoid expansion after Rif treatment arises from conversion of 70S-polysomes to 30S and 50S subunits, which readily penetrate the nucleoids. Monte Carlo simulations of a polymer bead model built to mimic the chromosomal DNA and ribosomes (either 70S-polysomes or 30S and 50S subunits explain spatial segregation or mixing of ribosomes and nucleoids in terms of excluded volume and entropic effects alone. A comprehensive model of the transcription-translation-transertion system incorporates this new information about the spatial organization of the E. coli cytoplasm. We propose that transertion, which radially expands the nucleoids, is essential for recycling of 30S and 50S subunits from ribosome-rich regions back into the nucleoids. There they initiate co-transcriptional translation, which is an important mechanism for maintaining RNAP forward progress and protecting the nascent mRNA chain. Segregation of 70S-polysomes from the nucleoid may facilitate rapid growth by shortening the search time for ribosomes to find free mRNA concentrated outside the nucleoid and the search time for RNAP concentrated within the nucleoid to find transcription

Rapid reconnection of flux lines

International Nuclear Information System (INIS)

Samain, A.

1982-01-01

The rapid reconnection of flux lines in an incompressible fluid through a singular layer of the current density is discussed. It is shown that the liberated magnetic energy must partially appear in the form of plasma kinetic energy. A laminar structure of the flow is possible, but Alfven velocity must be achieved in eddies of growing size at the ends of the layer. The gross structure of the flow and the magnetic configuration may be obtained from variational principles. (author)

RAPID FREEFORM SHEET METAL FORMING: TECHNOLOGY DEVELOPMENT AND SYSTEM VERIFICATION

Energy Technology Data Exchange (ETDEWEB)

Kiridena, Vijitha [Ford Scientific Research Lab., Dearborn, MI (United States); Verma, Ravi [Boeing Research and Technology (BR& T), Seattle, WA (United States); Gutowski, Timothy [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Roth, John [Pennsylvania State Univ., University Park, PA (United States)

2018-03-31

The objective of this project is to develop a transformational RApid Freeform sheet metal Forming Technology (RAFFT) in an industrial environment, which has the potential to increase manufacturing energy efficiency up to ten times, at a fraction of the cost of conventional technologies. The RAFFT technology is a flexible and energy-efficient process that eliminates the need for having geometry-specific forming dies. The innovation lies in the idea of using the energy resource at the local deformation area which provides greater formability, process control, and process flexibility relative to traditional methods. Double-Sided Incremental Forming (DSIF), the core technology in RAFFT, is a new concept for sheet metal forming. A blank sheet is clamped around its periphery and gradually deformed into a complex 3D freeform part by two strategically aligned stylus-type tools that follow a pre-described toolpath. The two tools, one on each side of the blank, can form a part with sharp features for both concave and convex shapes. Since deformation happens locally, the forming force at any instant is significantly decreased when compared to traditional methods. The key advantages of DSIF are its high process flexibility, high energy-efficiency, low capital investment, and the elimination of the need for massive amounts of die casting and machining. Additionally, the enhanced formability and process flexibility of DSIF can open up design spaces and result in greater weight savings.

Microbial transmutation of 137Cs and LENR in growing biological systems

International Nuclear Information System (INIS)

Vysotskii, V.I.; Kornilova, A.A.

2015-01-01

This article presents the results of long-term investigations of stable and radioactive isotopes transmutation in growing microbiological cultures. It is shown that transmutation during growth of microbiological associations is 20 times more effective than the same process in the form of 'clean' microbiological culture. In this work, the process of controlled decontamination of highly active reactor isotopes (reactor waste) through the process of growing microbiological associations has been studied. The most rapidly increasing decay rate of 137 Cs isotope, which occurred with the 'effective' half life τ* ≈ 310 days (involving an increase in rate and decrease in half life by a factor of 35) was observed in the presence of Ca salt in closed flask with active water containing 137 Cs solution and optimal microbiological association. (author)

Mycobacterium grossiae sp. nov., a rapidly growing, scotochromogenic species isolated from human clinical respiratory and blood culture specimens.

Science.gov (United States)

Paniz-Mondolfi, Alberto Enrique; Greninger, Alexander L; Ladutko, Lynn; Brown-Elliott, Barbara A; Vasireddy, Ravikiran; Jakubiec, Wesley; Vasireddy, Sruthi; Wallace, Richard J; Simmon, Keith E; Dunn, Bruce E; Jackoway, Gary; Vora, Surabhi B; Quinn, Kevin K; Qin, Xuan; Campbell, Sheldon

2017-11-01

A previously undescribed, rapidly growing, scotochromogenic species of the genus Mycobacterium (represented by strains PB739 T and GK) was isolated from two clinical sources - the sputum of a 76-year-old patient with severe chronic obstructive pulmonary disease, history of tuberculosis exposure and Mycobacterium avium complex isolated years prior; and the blood of a 15-year-old male with B-cell acute lymphoblastic leukaemia status post bone marrow transplant. The isolates grew as dark orange colonies at 25-37 °C after 5 days, sharing features in common with other closely related species. Analysis of the complete 16S rRNA gene sequence (1492 bp) of strain PB739 T demonstrated that the isolate shared 98.8 % relatedness with Mycobacterium wolinskyi. Partial 429 bp hsp65 and 744 bp rpoB region V sequence analyses revealed that the sequences of the novel isolate shared 94.8 and 92.1 % similarity with those of Mycobacterium neoaurum and Mycobacterium aurum, respectively. Biochemical profiling, antimicrobial susceptibility testing, HPLC/gas-liquid chromatography analyses and multilocus sequence typing support the taxonomic status of these isolates (PB739 T and GK) as representatives of a novel species. Both isolates were susceptible to the Clinical and Laboratory Standards Institute recommended antimicrobials for susceptibility testing of rapidly growing mycobacteria including amikacin, ciprofloxacin, moxifloxacin, doxycycline/minocycline, imipenem, linezolid, clarithromycin and trimethropin/sulfamethoxazole. Both isolates PB739 T and GK showed intermediate susceptibility to cefoxitin. We propose the name Mycobacterium grossiae sp. nov. for this novel species and have deposited the type strain in the DSMZ and CIP culture collections. The type strain is PB739 T (=DSM 104744 T =CIP 111318 T ).

A new form of rapid binocular plasticity in adult with amblyopia.

Science.gov (United States)

Zhou, Jiawei; Thompson, Benjamin; Hess, Robert F

2013-01-01

Amblyopia is a neurological disorder of binocular vision affecting up to 3% of the population resulting from a disrupted period of early visual development. Recently, it has been shown that vision can be partially restored by intensive monocular or dichoptic training (4-6 weeks). This can occur even in adults owing to a residual degree of brain plasticity initiated by repetitive and successive sensory stimulation. Here we show that the binocular imbalance that characterizes amblyopia can be reduced by occluding the amblyopic eye with a translucent patch for as little as 2.5 hours, suggesting a degree of rapid binocular plasticity in adults resulting from a lack of sensory stimulation. The integrated binocular benefit is larger in our amblyopic group than in our normal control group. We propose that this rapid improvement in function, as a result of reduced sensory stimulation, represents a new form of plasticity operating at a binocular site.

Mycobacterium oryzae sp. nov., a scotochromogenic, rapidly growing species is able to infect human macrophage cell line.

Science.gov (United States)

Ramaprasad, E V V; Rizvi, A; Banerjee, S; Sasikala, Ch; Ramana, Ch V

2016-11-01

Gram-stain-positive, acid-fast-positive, rapidly growing, rod-shaped bacteria (designated as strains JC290T, JC430 and JC431) were isolated from paddy cultivated soils on the Western Ghats of India. Phylogenetic analysis placed the three strains among the rapidly growing mycobacteria, being most closely related to Mycobacterium tokaiense 47503T (98.8 % 16S rRNA gene sequence similarity), Mycobacterium murale MA112/96T (98.8 %) and a few other Mycobacterium species. The level of DNA-DNA reassociation of the three strains with M. tokaiense DSM 44635T was 23.4±4 % (26.1±3 %, reciprocal analysis) and 21.4±2 % (22.1±4 %, reciprocal analysis). The three novel strains shared >99.9 % 16S rRNA gene sequence similarity and DNA-DNA reassociation values >85 %. Furthermore, phylogenetic analysis based on concatenated sequences (3071 bp) of four housekeeping genes (16S rRNA, hsp65, rpoB and sodA) revealed that strain JC290T is clearly distinct from all other Mycobacteriumspecies. The three strains had diphosphatidylglycerol, phosphatidylethanolamine, phosphatidylinositol, phosphatidylinositolmannosides, unidentified phospholipids, unidentified glycolipids and an unidentified lipid as polar lipids. The predominant isoprenoid quinone for all three strains was MK-9(H2). Fatty acids were C17 : 1ω7c, C16 : 0, C18 : 1ω9c, C16 : 1ω7c/C16 : 1ω6c and C19 : 1ω7c/C19 : 1ω6c for all the three strains. On the basis of phenotypic, chemotaxonomic and phylogenetic data, it was concluded that strains JC290T, JC430 and JC431 are members of a novel species within the genus Mycobacterium and for which the name Mycobacterium oryzae sp. nov. is proposed. The type strain is JC290T (=KCTC 39560T=LMG 28809T).

Chimeric antigen receptor T cells form nonclassical and potent immune synapses driving rapid cytotoxicity.

Science.gov (United States)

Davenport, A J; Cross, R S; Watson, K A; Liao, Y; Shi, W; Prince, H M; Beavis, P A; Trapani, J A; Kershaw, M H; Ritchie, D S; Darcy, P K; Neeson, P J; Jenkins, M R

2018-02-27

Chimeric antigen receptor T (CAR-T) cells are effective serial killers with a faster off-rate from dying tumor cells than CAR-T cells binding target cells through their T cell receptor (TCR). Here we explored the functional consequences of CAR-mediated signaling using a dual-specific CAR-T cell, where the same cell was triggered via TCR (tcrCTL) or CAR (carCTL). The carCTL immune synapse lacked distinct LFA-1 adhesion rings and was less reliant on LFA to form stable conjugates with target cells. carCTL receptors associated with the synapse were found to be disrupted and formed a convoluted multifocal pattern of Lck microclusters. Both proximal and distal receptor signaling pathways were induced more rapidly and subsequently decreased more rapidly in carCTL than in tcrCTL. The functional consequence of this rapid signaling in carCTL cells included faster lytic granule recruitment to the immune synapse, correlating with faster detachment of the CTL from the target cell. This study provides a mechanism for how CAR-T cells can debulk large tumor burden quickly and may contribute to further refinement of CAR design for enhancing the quality of signaling and programming of the T cell. Copyright © 2018 the Author(s). Published by PNAS.

Diversity, Community Composition, and Dynamics of Nonpigmented and Late-Pigmenting Rapidly Growing Mycobacteria in an Urban Tap Water Production and Distribution System

OpenAIRE

Dubrou, S.; Konjek, J.; Macheras, E.; Welté, B.; Guidicelli, L.; Chignon, E.; Joyeux, M.; Gaillard, J. L.; Heym, B.; Tully, T.; Sapriel, G.

2013-01-01

Nonpigmented and late-pigmenting rapidly growing mycobacteria (RGM) have been reported to commonly colonize water production and distribution systems. However, there is little information about the nature and distribution of RGM species within the different parts of such complex networks or about their clustering into specific RGM species communities. We conducted a large-scale survey between 2007 and 2009 in the Parisian urban tap water production and distribution system. We analyzed 1,418 w...

Rapid changes in gene expression direct rapid shifts in intestinal form and function in the Burmese python after feeding

OpenAIRE

Andrew, Audra L.; Card, Daren C.; Ruggiero, Robert P.; Schield, Drew R.; Adams, Richard H.; Pollock, David D.; Secor, Stephen M.; Castoe, Todd A.

2015-01-01

Snakes provide a unique and valuable model system for studying the extremes of physiological remodeling because of the ability of some species to rapidly upregulate organ form and function upon feeding. The predominant model species used to study such extreme responses has been the Burmese python because of the extreme nature of postfeeding response in this species. We analyzed the Burmese python intestine across a time series, before, during, and after feeding to understand the patterns and ...

Clinical and taxonomic status of pathogenic nonpigmented or late-pigmenting rapidly growing mycobacteria.

Science.gov (United States)

Brown-Elliott, Barbara A; Wallace, Richard J

2002-10-01

The history, taxonomy, geographic distribution, clinical disease, and therapy of the pathogenic nonpigmented or late-pigmenting rapidly growing mycobacteria (RGM) are reviewed. Community-acquired disease and health care-associated disease are highlighted for each species. The latter grouping includes health care-associated outbreaks and pseudo-outbreaks as well as sporadic disease cases. Treatment recommendations for each species and type of disease are also described. Special emphasis is on the Mycobacterium fortuitum group, including M. fortuitum, M. peregrinum, and the unnamed third biovariant complex with its recent taxonomic changes and newly recognized species (including M. septicum, M. mageritense, and proposed species M. houstonense and M. bonickei). The clinical and taxonomic status of M. chelonae, M. abscessus, and M. mucogenicum is also detailed, along with that of the closely related new species, M. immunogenum. Additionally, newly recognized species, M. wolinskyi and M. goodii, as well as M. smegmatis sensu stricto, are included in a discussion of the M. smegmatis group. Laboratory diagnosis of RGM using phenotypic methods such as biochemical testing and high-performance liquid chromatography and molecular methods of diagnosis are also discussed. The latter includes PCR-restriction fragment length polymorphism analysis, hybridization, ribotyping, and sequence analysis. Susceptibility testing and antibiotic susceptibility patterns of the RGM are also annotated, along with the current recommendations from the National Committee for Clinical Laboratory Standards (NCCLS) for mycobacterial susceptibility testing.

Rapidly-growing mycobacterial infection: a recognized cause of early-onset prosthetic joint infection.

Science.gov (United States)

Jitmuang, Anupop; Yuenyongviwat, Varah; Charoencholvanich, Keerati; Chayakulkeeree, Methee

2017-12-28

Prosthetic joint infection (PJI) is a major complication of total hip and total knee arthroplasty (THA, TKA). Although mycobacteria are rarely the causative pathogens, it is important to recognize and treat them differently from non-mycobacterial infections. This study aimed to compare the clinical characteristics, associated factors and long-term outcomes of mycobacterial and non-mycobacterial PJI. We conducted a retrospective case-control study of patients aged ≥18 years who were diagnosed with PJI of the hip or knee at Siriraj Hospital from January 2000 to December 2012. Patient characteristics, clinical data, treatments and outcomes were evaluated. A total of 178 patients were included, among whom 162 had non-mycobacterial PJI and 16 had mycobacterial PJI. Rapidly growing mycobacteria (RGM) (11) and M. tuberculosis (MTB) (5) were the causative pathogens of mycobacterial PJI. PJI duration and time until onset were significantly different between mycobacterial and non-mycobacterial PJI. Infection within 90 days of arthroplasty was significantly associated with RGM infection (OR 21.86; 95% CI 4.25-112.30; p infection. RGM were the major pathogens of early onset PJI after THA and TKA. Both a high clinical index of suspicion and mycobacterial cultures are recommended when medically managing PJI with negative cultures or non-response to antibiotics. Removal of infected implants was associated with favorable outcomes.

E-cigarettes: a rapidly growing Internet phenomenon.

Science.gov (United States)

Yamin, Cyrus K; Bitton, Asaf; Bates, David W

2010-11-02

Electronic cigarettes (e-cigarettes) aerosolize nicotine and produce a vapor that emulates that of cigarettes but purportedly has fewer traditional toxins than secondhand smoke. Although e-cigarettes are widely sold online and by retailers, new research suggests that they may contain unexpected toxins and may provide unreliable nicotine delivery. Many countries have already banned or strictly regulated e-cigarettes. Currently in the United States, e-cigarettes are exempt from regulation as drug-delivery devices. Meanwhile, the presence of e-cigarettes on the Internet, including in Web searches, virtual user communities, and online stores where people sell e-cigarettes on commission, is increasing rapidly. Physicians should be aware of the popularity, questionable efficacy claims, and safety concerns of e-cigarettes so that they may counsel patients against use and advocate for research to inform an evidence-based regulatory approach.

Embedding the Form Generator in a Content Management System

Science.gov (United States)

Delgado, A.; Wicenec, A.; Delmotte, N.; Tejero, A.

2008-08-01

Given the tremendous amount of data generated by ESO's telescopes and the rapid evolution of the World Wide Web, the ESO archive web interface needs to offer more flexible services and advanced functionalities to a growing community of users all over the world. To achieve this endeavour, a query form generator is being developed inside a Content Management System. We present here a progress report.

Tetracycline resistance and presence of tetracycline resistance determinants .i.tet./i.(V) and .i.tap./i. in rapidly growing mycobacteria from agricultural soils and clinical isolates

Czech Academy of Sciences Publication Activity Database

Kyselková, Martina; Chroňáková, Alica; Volná, Lucie; Němec, Jan; Ulmann, V.; Scharfen, J.; Elhottová, Dana

2012-01-01

Roč. 27, č. 4 (2012), s. 413-422 ISSN 1342-6311 R&D Projects: GA ČR GAP504/10/2077; GA MŠk LC06066 Institutional support: RVO:60077344 Keywords : efflux pump * rapidly growing Mycobacterium * tetracycline resistance * tap * tet (V) Subject RIV: EH - Ecology, Behaviour Impact factor: 2.444, year: 2012

EU-approved rapid tests for bovine spongiform encephalopathy detect atypical forms: a study for their sensitivities.

Directory of Open Access Journals (Sweden)

Daniela Meloni

Full Text Available Since 2004 it become clear that atypical bovine spongiform encephalopthies (BSEs exist in cattle. Whenever their detection has relied on active surveillance plans implemented in Europe since 2001 by rapid tests, the overall and inter-laboratory performance of these diagnostic systems in the detection of the atypical strains has not been studied thoroughly to date. To fill this gap, the present study reports on the analytical sensitivity of the EU-approved rapid tests for atypical L- and H-type and classical BSE in parallel. Each test was challenged with two dilution series, one created from a positive pool of the three BSE forms according to the EURL standard method of homogenate preparation (50% w/v and the other as per the test kit manufacturer's instructions. Multilevel logistic models and simple logistic models with the rapid test as the only covariate were fitted for each BSE form analyzed as directed by the test manufacturer's dilution protocol. The same schemes, but excluding the BSE type, were then applied to compare test performance under the manufacturer's versus the water protocol. The IDEXX HerdChek ® BSE-scrapie short protocol test showed the highest sensitivity for all BSE forms. The IDEXX® HerdChek BSE-scrapie ultra short protocol, the Prionics®--Check WESTERN and the AJ Roboscreen® BetaPrion tests showed similar sensitivities, followed by the Roche® PrionScreen, the Bio-Rad® TeSeE™ SAP and the Prionics®--Check PrioSTRIP in descending order of analytical sensitivity. Despite these differences, the limit of detection of all seven rapid tests against the different classes of material set within a 2 log(10 range of the best-performing test, thus meeting the European Food Safety Authority requirement for BSE surveillance purposes. These findings indicate that not many atypical cases would have been missed surveillance since 2001 which is important for further epidemiological interpretations of the sporadic character of

Drug Susceptibility Testing of 31 Antimicrobial Agents on Rapidly Growing Mycobacteria Isolates from China.

Science.gov (United States)

Pang, Hui; Li, Guilian; Zhao, Xiuqin; Liu, Haican; Wan, Kanglin; Yu, Ping

2015-01-01

Several species of rapidly growing mycobacteria (RGM) are now recognized as human pathogens. However, limited data on effective drug treatments against these organisms exists. Here, we describe the species distribution and drug susceptibility profiles of RGM clinical isolates collected from four southern Chinese provinces from January 2005 to December 2012. Clinical isolates (73) were subjected to in vitro testing with 31 antimicrobial agents using the cation-adjusted Mueller-Hinton broth microdilution method. The isolates included 55 M. abscessus, 11 M. fortuitum, 3 M. chelonae, 2 M. neoaurum, and 2 M. septicum isolates. M. abscessus (75.34%) and M. fortuitum (15.07%), the most common species, exhibited greater antibiotic resistance than the other three species. The isolates had low resistance to amikacin, linezolid, and tigecycline, and high resistance to first-line antituberculous agents, amoxicillin-clavulanic acid, rifapentine, dapsone, thioacetazone, and pasiniazid. M. abscessus and M. fortuitum were highly resistant to ofloxacin and rifabutin, respectively. The isolates showed moderate resistance to the other antimicrobial agents. Our results suggest that tigecycline, linezolid, clofazimine, and cefmetazole are appropriate choices for M. abscessus infections. Capreomycin, sulfamethoxazole, tigecycline, clofazimine, and cefmetazole are potentially good choices for M. fortuitum infections. Our drug susceptibility data should be useful to clinicians.

Drug Susceptibility Testing of 31 Antimicrobial Agents on Rapidly Growing Mycobacteria Isolates from China

Directory of Open Access Journals (Sweden)

Hui Pang

2015-01-01

Full Text Available Objectives. Several species of rapidly growing mycobacteria (RGM are now recognized as human pathogens. However, limited data on effective drug treatments against these organisms exists. Here, we describe the species distribution and drug susceptibility profiles of RGM clinical isolates collected from four southern Chinese provinces from January 2005 to December 2012. Methods. Clinical isolates (73 were subjected to in vitro testing with 31 antimicrobial agents using the cation-adjusted Mueller-Hinton broth microdilution method. The isolates included 55 M. abscessus, 11 M. fortuitum, 3 M. chelonae, 2 M. neoaurum, and 2 M. septicum isolates. Results. M. abscessus (75.34% and M. fortuitum (15.07%, the most common species, exhibited greater antibiotic resistance than the other three species. The isolates had low resistance to amikacin, linezolid, and tigecycline, and high resistance to first-line antituberculous agents, amoxicillin-clavulanic acid, rifapentine, dapsone, thioacetazone, and pasiniazid. M. abscessus and M. fortuitum were highly resistant to ofloxacin and rifabutin, respectively. The isolates showed moderate resistance to the other antimicrobial agents. Conclusions. Our results suggest that tigecycline, linezolid, clofazimine, and cefmetazole are appropriate choices for M. abscessus infections. Capreomycin, sulfamethoxazole, tigecycline, clofazimine, and cefmetazole are potentially good choices for M. fortuitum infections. Our drug susceptibility data should be useful to clinicians.

[The social marketing models and policy advices for HIV rapid testing initiated by non-govermental organization].

Science.gov (United States)

Liu, H; Cai, L P; Xue, H; Zhao, Y; Wu, D; Zhang, D P; Yin, W Y; Sun, J P

2016-10-06

Currently, a growing number of community-based organizations are providing rapid HIV testing service in various forms, some people with specific needs also purchase HIV rapid test papers through online sales channels, those imply that the demand of HIV self-test is in increasing year by year.In this paper, aims to understand the current situation of HIV rapid test led by CBOs and the approach, strategies and results of social marketing by means of expert interviews and site visits. Hope to illustrate the current situation, and make recommendations for future work.

Rapid-Growing Mycobacteria Infections in Medical Tourists: Our Experience and Literature Review.

Science.gov (United States)

Singh, Mansher; Dugdale, Caitlin M; Solomon, Isaac H; Huang, Anne; Montgomery, Mary W; Pomahac, Bohdan; Yawetz, Sigal; Maguire, James H; Talbot, Simon G

2016-09-01

"Medical tourism" has gained popularity over the past few decades. This is particularly common with patients seeking elective cosmetic surgery in the developing world. However, the risk of severe and unusual infectious complications appears to be higher than for patients undergoing similar procedures in the United States. The authors describe their experience with atypical mycobacterial infections in cosmetic surgical patients returning to the United States postoperatively. A review of patient medical records presenting with infectious complications after cosmetic surgery between January 2010 and July 2015 was performed. Patients presenting with mycobacterial infections following cosmetic surgery were reviewed in detail. An extensive literature review was performed for rapid-growing mycobacteria (RGM) related to cosmetic procedures. Between January 2010 and July 2015, three patients presented to our institution with culture-proven Mycobacterium abscessus at the sites of recent cosmetic surgery. All had surgery performed in the developing world. The mean age of these patients was 36 years (range, 29-44 years). There was a delay of up to 16 weeks between the initial presentation and correct diagnosis. All patients were treated with surgical drainage and combination antibiotics with complete resolution. We present series of patients with mycobacterial infections after cosmetic surgery in the developing world. This may be related to the endemic nature of these bacteria and/or inadequate sterilization or sterile technique. Due to low domestic incidence of these infections, diagnosis may be difficult and/or delayed. Consulting physicians should have a low threshold to consider atypical etiologies in such scenarios. 5 Therapeutic. © 2016 The American Society for Aesthetic Plastic Surgery, Inc. Reprints and permission: journals.permissions@oup.com.

Urban cyclist exposure to fine particle pollution in a rapidly growing city

Science.gov (United States)

Luce, B. W.; Barrett, T. E.; Ponette-González, A.

2017-12-01

Urban cyclists are exposed to elevated atmospheric concentrations of fine particulate matter (particles vehicle exhaust, which is emitted directly into cyclists' "breathing zone." In cities, human exposure to PM2.5 is a concern because its small size allows it to be inhaled deeper into the lungs than most particles. The aim of this research is to determine "hotspots" (locations with high PM2.5 concentrations) within the Dallas-Fort Worth Metroplex, Texas, where urban cyclists are most exposed to fine particle pollution. Recent research indicates that common exposure hotspots include traffic signals, junctions, bus stations, parking lots, and inclined streets. To identify these and other hotspots, a bicycle equipped with a low-cost, portable, battery-powered particle counter (Dylos 1700) coupled with a Trimble Geo 5T handheld Global Positioning System (GPS; ≤1 m ± resolution) will be used to map and measure particle mass concentrations along predetermined routes. Measurements will be conducted during a consecutive four-month period (Sep-Dec) during morning and evening rush hours when PM2.5 levels are generally highest, as well as during non-rush hour times to determine background concentrations. PM2.5 concentrations will be calculated from particle counts using an equation developed by Steinle et al. (2015). In addition, traffic counts will be conducted along the routes coinciding with the mobile monitoring times. We will present results on identified "hotspots" of high fine particle concentrations and PM2.5 exposure in the City of Denton, where particle pollution puts urban commuters most at risk, as well as average traffic counts from monitoring times. These data can be used to determine pollution mitigation strategies in rapidly growing urban areas.

Rapidly growing non-tuberculous mycobacteria infection of prosthetic knee joints: A report of two cases.

Science.gov (United States)

Kim, Manyoung; Ha, Chul-Won; Jang, Jae Won; Park, Yong-Beom

2017-08-01

Non-tuberculous mycobacteria (NTM) cause prosthetic knee joint infections in rare cases. Infections with rapidly growing non-tuberculous mycobacteria (RGNTM) are difficult to treat due to their aggressive clinical behavior and resistance to antibiotics. Infections of a prosthetic knee joint by RGNTM have rarely been reported. A standard of treatment has not yet been established because of the rarity of the condition. In previous reports, diagnoses of RGNTM infections in prosthetic knee joints took a long time to reach because the condition was not suspected, due to its rarity. In addition, it is difficult to identify RGNTM in the lab because special identification tests are needed. In previous reports, after treatment for RGNTM prosthetic infections, knee prostheses could not be re-implanted in all cases but one, resulting in arthrodesis or resection arthroplasty; this was most likely due to the aggressiveness of these organisms. In the present report, two cases of prosthetic knee joint infection caused by RGNTM (Mycobacterium abscessus) are described that were successfully treated, and in which prosthetic joints were finally reimplanted in two-stage revision surgery. Copyright © 2017 Elsevier B.V. All rights reserved.

Rapid growth of single-layer graphene on the insulating substrates by thermal CVD

Energy Technology Data Exchange (ETDEWEB)

Chen, C.Y. [Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093 (China); Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Dai, D.; Chen, G.X.; Yu, J.H. [Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Nishimura, K. [Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Advanced Nano-processing Engineering Lab, Mechanical Systems Engineering, Kogakuin University (Japan); Lin, C.-T. [Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Jiang, N., E-mail: jiangnan@nimte.ac.cn [Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Zhan, Z.L., E-mail: zl_zhan@sohu.com [Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093 (China)

2015-08-15

Highlights: • A rapid thermal CVD process has been developed to directly grow graphene on the insulating substrates. • The treating time consumed is ≈25% compared to conventional CVD procedure. • Single-layer and few-layer graphene can be formed on quartz and SiO{sub 2}/Si substrates, respectively. • The formation of thinner graphene at the interface is due to the fast precipitation rate of carbon atoms during cooling. - Abstract: The advance of CVD technique to directly grow graphene on the insulating substrates is particularly significant for further device fabrication. As graphene is catalytically grown on metal foils, the degradation of the sample properties is unavoidable during transfer of graphene on the dielectric layer. Moreover, shortening the treatment time as possible, while achieving single-layer growth of graphene, is worthy to be investigated for promoting the efficiency of mass production. Here we performed a rapid heating/cooling process to grow graphene films directly on the insulating substrates by thermal CVD. The treating time consumed is ≈25% compared to conventional CVD procedure. In addition, we found that high-quality, single-layer graphene can be formed on quartz, but on SiO{sub 2}/Si substrate only few-layer graphene can be obtained. The pronounced substrate effect is attributed to the different dewetting behavior of Ni films on the both substrates at 950 °C.

Rapid changes in gene expression direct rapid shifts in intestinal form and function in the Burmese python after feeding.

Science.gov (United States)

Andrew, Audra L; Card, Daren C; Ruggiero, Robert P; Schield, Drew R; Adams, Richard H; Pollock, David D; Secor, Stephen M; Castoe, Todd A

2015-05-01

Snakes provide a unique and valuable model system for studying the extremes of physiological remodeling because of the ability of some species to rapidly upregulate organ form and function upon feeding. The predominant model species used to study such extreme responses has been the Burmese python because of the extreme nature of postfeeding response in this species. We analyzed the Burmese python intestine across a time series, before, during, and after feeding to understand the patterns and timing of changes in gene expression and their relationship to changes in intestinal form and function upon feeding. Our results indicate that >2,000 genes show significant changes in expression in the small intestine following feeding, including genes involved in intestinal morphology and function (e.g., hydrolases, microvillus proteins, trafficking and transport proteins), as well as genes involved in cell division and apoptosis. Extensive changes in gene expression occur surprisingly rapidly, within the first 6 h of feeding, coincide with changes in intestinal morphology, and effectively return to prefeeding levels within 10 days. Collectively, our results provide an unprecedented portrait of parallel changes in gene expression and intestinal morphology and physiology on a scale that is extreme both in the magnitude of changes, as well as in the incredibly short time frame of these changes, with up- and downregulation of expression and function occurring in the span of 10 days. Our results also identify conserved vertebrate signaling pathways that modulate these responses, which may suggest pathways for therapeutic modulation of intestinal function in humans. Copyright © 2015 the American Physiological Society.

Superplastic forming of rapid solidification processed Al-4Li-0.2Zr

International Nuclear Information System (INIS)

Meschter, P.J.; Lederich, R.J.; Sastry, S.M.L.

1987-01-01

Aluminum-4 wt pct lithium alloys are attractive as structural materials because they are 13 to 14 pct less dense and have 25 pct larger elastic moduli than high-strength 2XXX-and 7XXX-series aluminum alloys. These low-density alloys can be produced only by rapid solidification processing (RSP). Successful RSP of Al-4Li-0.2Zr, Al-4Li-1Mg-0.2Zr, and Al-4Li-1Cu-0.2Zr alloys with strengths similar to that of 7075-T76 has recently been demonstrated. Net-shaped processing techniques such as superplastic forming are capable of producing complex structural elements while minimizing usage of expensive material; thus, these techniques are particularly applicable to Al-Li alloys. The purpose of this study was to determine the conditions of strain rate and temperature under which RSP Al-4Li alloys could be superplastically formed

Isotopic tracer studies to evaluate relative efficiency of different forms of P for growing rice on different soil types

Energy Technology Data Exchange (ETDEWEB)

Dash, R N; Mohanty, S K; Patnaik, S [Central Rice Research Inst., Cuttack (India)

1977-12-01

The relative efficiency of different forms of P in relation to their time of application for growing rice on different soil types has been studied by using /sup 32/P tagged mono-, di-, and tri-calcium phosphate, ammonium nitrate phosphate containing all the P in the citrate-soluble form and potassium meta-phosphate. P-deficient acid laterite soil from Burdwan, red loam soil from Peramanpur and calcareous black soil from Hyderabad were used in the study. The different P forms were found to be compatible in the acid, red and laterite soils when the phosphorus forms were primed to moist acid soils 2 weeks prior to flooding. On application at flooding, fertilizers containing citrate-soluble phosphate were found to be less effective as compared to those containing water-soluble phosphate. In the calcareous black soil, however, the fertilizers, containing insoluble or citrate-soluble phosphates were not as efficient as the water-soluble forms, possibly because of lack of dissolution process. Potassium meta-phosphate was found to be effective in all the soil types whether applied at flooding or primed to the moist soil.

Fostering and sustaining innovation in a Fast Growing Agile Company

OpenAIRE

Moe, NilsBrede; Barney, Sebastian; Aurum, Aybüe; Khurum, Mahvish; Wohlin, Claes; Barney, Hamish; Gorschek, Tony; Winata, Martha

2012-01-01

Sustaining innovation in a fast growing software development company is difficult. As organisations grow, peoples' focus often changes from the big picture of the product being developed to the specific role they fill. This paper presents two complementary approaches that were successfully used to support continued developer-driven innovation in a rapidly growing Australian agile software development company. The method "FedEx TM Day" gives developers one day to showcase a proof of concept th...

Safety dose of three commercially used growth promoters: nuricell- aqua, hepaprotect-aqua and rapid-grow on growth and survival of Thai pangas (Pangasianodon hypophthalmus

Directory of Open Access Journals (Sweden)

Md. Ariful Islam

2014-02-01

Full Text Available Objective: To optimize the dose of 3 commonly used growth promoters, viz., Nuricell-Aqua (composition: glucomannan complex and mannose polymer, Hepaprotect-Aqua (composition: β-glucan, mannose polymer and essential oil and Rapid-Grow (composition: organic acid and their salt, β-glucan, mannose oligosaccharide and essential oil, using Thai pangas (Pangasiandon hypophthalmus as cultured species. Methods: Thai pangas fingerlings with an average length and weight of 11 cm and 10 g were reared under laboratory condition and growth promoters were fed after incorporating them with a test diet at a ratio of 10% of their body weight for a period of 28 d. Estimation of data on growth such as weight gain (g, specific growth rate, survivability (% test in each aquarium were conducted and data were analyzed using statistical software. Results: After 28 d of feeding with Nutricell-Aqua, 10 mg/(20 g feed·day, which was the dose recommended by the manufacturer, was found better. When Hepaprotect-Aqua and Rapid-Grow were employed, performance was found to be better with the dose of 60 mg/(20 g feed·day which was 1.5 times higher than the dose recommended by the corresponding manufacturer. Conclusions: These results suggest that chemicals and feed additives marketed in Bangladesh Fish Feed Market need further testing under Bangladesh climatic condition before being marketed.

Isotopic tracer studies to evaluate relative efficiency of different forms of P for growing rice on different soil types

International Nuclear Information System (INIS)

Dash, R.N.; Mohanty, S.K.; Patnaik, S.

1977-01-01

The relative efficiency of different forms of P in relation to their time of application for growing rice on different soil types has been studied by using 32 P tagged mono-, di-, and tri-calcium phosphate, ammonium nitrate phosphate containing all the P in the citrate-soluble form and potassium meta-phosphate. P-deficient acid laterite soil from Burdwan, red loam soil from Peramanpur and calcareous black soil from Hyderabad were used in the study. The different P forms were found to be compatible in the acid, red and laterite soils when the phosphorus forms were primed to moist acid soils 2 weeks prior to flooding. On application at flooding, fertilizers containing citrate-soluble phosphate were found to be less effective as compared to those containing water-soluble phosphate. In the calcareous black soil, however, the fertilizers, containing insoluble or citrate-soluble phosphates were not as efficient as the water-soluble forms, possibly because of lack of dissolution process. Potassium meta-phosphate was found to be effective in all the soil types whether applied at flooding or primed to the moist soil. (M.G.B.)

Rare Rapidly Growing Thumb Lesion in a 12-Year-Old Male

Directory of Open Access Journals (Sweden)

Alana J Arnold, MD, MBA

2018-04-01

��t amenable to surgery.4 Surgery is the mainstay of care. The first medical treatment, denosumab, was approved by the FDA for use in adults and skeletally mature adolescents with surgically unresectable lesions.5 It is critical to obtain definitive imaging and biopsy of any rapidly growing lesions in patients presenting with masses and no history of trauma or constitutional symptoms. The best imaging study is MRI, to assess for bony and tissue involvement and surgical approach. Computed tomography may be used; however, it doesn’t delineate the soft tissue and bony connections as well. Standard oncology labs should be drawn as well, including: CBC with differential, LDH, uric acid, CMP, ESR. The growth of the tumor is insidious and therefore imaging should be done based on clinical concern. In the ED setting, if close follow up can be ensured, imaging can be done as an out-patient. Annual surveillance is recommended for at least 5 years in most patients, even after total resection, according to some studies.3 Our patient underwent GCTB resection with plastics surgery of the distal phalanx of thumb. He was seen in follow-up in the oncology clinic. Pathology of the tumor had negative margins, and he was told to follow-up in six months with plastics. Per hematology, no further follow-up was needed. Topics: Pediatrics, giant cell tumor, thumb lesion

Rapid interactions between lexical semantic and word form analysis during word recognition in context: evidence from ERPs.

Science.gov (United States)

Kim, Albert; Lai, Vicky

2012-05-01

We used ERPs to investigate the time course of interactions between lexical semantic and sublexical visual word form processing during word recognition. Participants read sentence-embedded pseudowords that orthographically resembled a contextually supported real word (e.g., "She measured the flour so she could bake a ceke…") or did not (e.g., "She measured the flour so she could bake a tont…") along with nonword consonant strings (e.g., "She measured the flour so she could bake a srdt…"). Pseudowords that resembled a contextually supported real word ("ceke") elicited an enhanced positivity at 130 msec (P130), relative to real words (e.g., "She measured the flour so she could bake a cake…"). Pseudowords that did not resemble a plausible real word ("tont") enhanced the N170 component, as did nonword consonant strings ("srdt"). The effect pattern shows that the visual word recognition system is, perhaps, counterintuitively, more rapidly sensitive to minor than to flagrant deviations from contextually predicted inputs. The findings are consistent with rapid interactions between lexical and sublexical representations during word recognition, in which rapid lexical access of a contextually supported word (CAKE) provides top-down excitation of form features ("cake"), highlighting the anomaly of an unexpected word "ceke."

Urban expansion and transportation : the impact of urban form on commuting patterns on the city fringe of Beijing

NARCIS (Netherlands)

Zhao, Pengjun; Lue, Bin; de Roo, Gert

2010-01-01

A key issue in the development of China's growing megacities in the transport-related environmental costs due to rapid urban expansion. In light of this issue, the authors examine the impact of urban form on commuting patterns on the city fringe of Beijing. Based on household-survey data, the

How do normal faults grow?

OpenAIRE

Blækkan, Ingvild; Bell, Rebecca; Rotevatn, Atle; Jackson, Christopher; Tvedt, Anette

2018-01-01

Faults grow via a sympathetic increase in their displacement and length (isolated fault model), or by rapid length establishment and subsequent displacement accrual (constant-length fault model). To test the significance and applicability of these two models, we use time-series displacement (D) and length (L) data extracted for faults from nature and experiments. We document a range of fault behaviours, from sympathetic D-L fault growth (isolated growth) to sub-vertical D-L growth trajectorie...

Alterations of Liver Histomorphology in Relation to Copper Supplementation in Inorganic and Organic Form in Growing Rats

Directory of Open Access Journals (Sweden)

Tomaszewska Ewa

2014-10-01

Full Text Available The aim of this study was to define the effects of diet containing the same mineral content of mineral salt or amino acid chelate, and diet containing various levels of Cu amino acid chelate on liver histomorphometry in growing rats. Male Wistar rats were used in the 12th week experiment. The control group (n = 12 was fed standard diet, which provided Cu in an inorganic form at the level required for rats. The experimental animals were divided into four groups (each n = 12 depending on different levels (100%, 75%, 50%, 25% covered daily demand of Cu supplementation in chelated form. Cu content was determined in the liver tissue and blood plasma. Immunohistochemical staining with caspase-3 antibody was performed. Microscopic assessment of the liver structure indicated that Cu supplementation did not change the liver architecture. However, histomorphometric analysis revealed a significant increase in the number of nuclei, total cell number, and multinucleated hepatocytes in rats supplemented with the organic form of Cu at the level of 25% compared with the control group. There was a considerable increase in the number of apoptotic cells and ballooning degeneration of hepatocytes, especially in groups supplemented with organic form of Cu covering the daily demand in 100% and 75%, in comparison to control group. Moreover, there was no Cu deposition in the liver and changes in Cu content in blood. Cu provided in the diet in organic form covering an amount of its minimum daily demand in 25% appears to be the least harmful with regard to the liver. It indicates that there is a need to establish the level of diet supplementation with Cu amino acid chelates.

Dusty Cloud Acceleration by Radiation Pressure in Rapidly Star-forming Galaxies

Science.gov (United States)

Zhang, Dong; Davis, Shane W.; Jiang, Yan-Fei; Stone, James M.

2018-02-01

We perform two-dimensional and three-dimensional radiation hydrodynamic simulations to study cold clouds accelerated by radiation pressure on dust in the environment of rapidly star-forming galaxies dominated by infrared flux. We utilize the reduced speed of light approximation to solve the frequency-averaged, time-dependent radiative transfer equation. We find that radiation pressure is capable of accelerating the clouds to hundreds of kilometers per second while remaining dense and cold, consistent with observations. We compare these results to simulations where acceleration is provided by entrainment in a hot wind, where the momentum injection of the hot flow is comparable to the momentum in the radiation field. We find that the survival time of the cloud accelerated by the radiation field is significantly longer than that of a cloud entrained in a hot outflow. We show that the dynamics of the irradiated cloud depends on the initial optical depth, temperature of the cloud, and intensity of the flux. Additionally, gas pressure from the background may limit cloud acceleration if the density ratio between the cloud and background is ≲ {10}2. In general, a 10 pc-scale optically thin cloud forms a pancake structure elongated perpendicular to the direction of motion, while optically thick clouds form a filamentary structure elongated parallel to the direction of motion. The details of accelerated cloud morphology and geometry can also be affected by other factors, such as the cloud lengthscale, reduced speed of light approximation, spatial resolution, initial cloud structure, and dimensionality of the run, but these have relatively little affect on the cloud velocity or survival time.

Amorphous salts formed from rapid dehydration of multicomponent chloride and ferric sulfate brines: Implications for Mars

Science.gov (United States)

Sklute, Elizabeth C.; Rogers, A. Deanne; Gregerson, Jason C.; Jensen, Heidi B.; Reeder, Richard J.; Dyar, M. Darby

2018-03-01

Salts with high hydration states have the potential to maintain high levels of relative humidity (RH) in the near subsurface of Mars, even at moderate temperatures. These conditions could promote deliquescence of lower hydrates of ferric sulfate, chlorides, and other salts. Previous work on deliquesced ferric sulfates has shown that when these materials undergo rapid dehydration, such as that which would occur upon exposure to present day Martian surface conditions, an amorphous phase forms. However, the fate of deliquesced halides or mixed ferric sulfate-bearing brines are presently unknown. Here we present results of rapid dehydration experiments on Ca-, Na-, Mg- and Fe-chloride brines and multicomponent (Fe2(SO4)3 ± Ca, Na, Mg, Fe, Cl, HCO3) brines at ∼21 °C, and characterize the dehydration products using visible/near-infrared (VNIR) reflectance spectroscopy, mid-infrared attenuated total reflectance spectroscopy, and X-ray diffraction (XRD) analysis. We find that rapid dehydration of many multicomponent brines can form amorphous solids or solids with an amorphous component, and that the presence of other elements affects the persistence of the amorphous phase under RH fluctuations. Of the pure chloride brines, only Fe-chloride formed an amorphous solid. XRD patterns of the multicomponent amorphous salts show changes in position, shape, and magnitude of the characteristic diffuse scattering observed in all amorphous materials that could be used to help constrain the composition of the amorphous salt. Amorphous salts deliquesce at lower RH values compared to their crystalline counterparts, opening up the possibility of their role in potential deliquescence-related geologic phenomena such as recurring slope lineae (RSLs) or soil induration. This work suggests that a wide range of aqueous mixed salt solutions can lead to the formation of amorphous salts and are possible for Mars; detailed studies of the formation mechanisms, stability and transformation

Amorphous salts formed from rapid dehydration of multicomponent chloride and ferric sulfate brines: Implications for Mars

Science.gov (United States)

Sklute, Elizabeth C.; Rogers, A. Deanne; Gregerson, Jason C.; Jensen, Heidi B.; Reeder, Richard J.; Dyar, M. Darby

2018-01-01

Salts with high hydration states have the potential to maintain high levels of relative humidity (RH) in the near subsurface of Mars, even at moderate temperatures. These conditions could promote deliquescence of lower hydrates of ferric sulfate, chlorides, and other salts. Previous work on deliquesced ferric sulfates has shown that when these materials undergo rapid dehydration, such as that which would occur upon exposure to present day Martian surface conditions, an amorphous phase forms. However, the fate of deliquesced halides or mixed ferric sulfate-bearing brines are presently unknown. Here we present results of rapid dehydration experiments on Ca–, Na–, Mg– and Fe–chloride brines and multi-component (Fe2 (SO4)3 ± Ca, Na, Mg, Fe, Cl, HCO3) brines at ∼21°C, and characterize the dehydration products using visible/near-infrared (VNIR) reflectance spectroscopy, mid-infrared attenuated total reflectance spectroscopy, and X-ray diffraction (XRD) analysis. We find that rapid dehydration of many multicomponent brines can form amorphous solids or solids with an amorphous component, and that the presence of other elements affects the persistence of the amorphous phase under RH fluctuations. Of the pure chloride brines, only Fe–chloride formed an amorphous solid. XRD patterns of the multicomponent amorphous salts show changes in position, shape, and magnitude of the characteristic diffuse scattering observed in all amorphous materials that could be used to help constrain the composition of the amorphous salt. Amorphous salts deliquesce at lower RH values compared to their crystalline counterparts, opening up the possibility of their role in potential deliquescence-related geologic phenomena such as recurring slope lineae (RSLs) or soil induration. This work suggests that a wide range of aqueous mixed salt solutions can lead to the formation of amorphous salts and are possible for Mars; detailed studies of the formation mechanisms, stability and

Amorphous salts formed from rapid dehydration of multicomponent chloride and ferric sulfate brines: Implications for Mars.

Science.gov (United States)

Sklute, Elizabeth C; Rogers, A Deanne; Gregerson, Jason C; Jensen, Heidi B; Reeder, Richard J; Dyar, M Darby

2018-03-01

Salts with high hydration states have the potential to maintain high levels of relative humidity (RH) in the near subsurface of Mars, even at moderate temperatures. These conditions could promote deliquescence of lower hydrates of ferric sulfate, chlorides, and other salts. Previous work on deliquesced ferric sulfates has shown that when these materials undergo rapid dehydration, such as that which would occur upon exposure to present day Martian surface conditions, an amorphous phase forms. However, the fate of deliquesced halides or mixed ferric sulfate-bearing brines are presently unknown. Here we present results of rapid dehydration experiments on Ca-, Na-, Mg- and Fe-chloride brines and multi-component (Fe 2 (SO 4 ) 3 ± Ca, Na, Mg, Fe, Cl, HCO 3 ) brines at ∼21°C, and characterize the dehydration products using visible/near-infrared (VNIR) reflectance spectroscopy, mid-infrared attenuated total reflectance spectroscopy, and X-ray diffraction (XRD) analysis. We find that rapid dehydration of many multicomponent brines can form amorphous solids or solids with an amorphous component, and that the presence of other elements affects the persistence of the amorphous phase under RH fluctuations. Of the pure chloride brines, only Fe-chloride formed an amorphous solid. XRD patterns of the multicomponent amorphous salts show changes in position, shape, and magnitude of the characteristic diffuse scattering observed in all amorphous materials that could be used to help constrain the composition of the amorphous salt. Amorphous salts deliquesce at lower RH values compared to their crystalline counterparts, opening up the possibility of their role in potential deliquescence-related geologic phenomena such as recurring slope lineae (RSLs) or soil induration. This work suggests that a wide range of aqueous mixed salt solutions can lead to the formation of amorphous salts and are possible for Mars; detailed studies of the formation mechanisms, stability and transformation

Growing skull hemangioma: first and unique description in a patient with Klippel-Trénaunay-Weber syndrome.

Science.gov (United States)

van der Loo, Lars E; Beckervordersandforth, Jan; Colon, Albert J; Schijns, Olaf E M G

2017-02-01

We present the first and unique case of a rapid-growing skull hemangioma in a patient with Klippel-Trénaunay-Weber syndrome. This case report provides evidence that not all rapid-growing, osteolytic skull lesions need to have a malignant character but certainly need a histopathological verification. This material offers insight into the list of rare pathological diagnoses in an infrequent syndrome.

Hydrothermal vents in Lake Tanganyika harbor spore-forming thermophiles with extremely rapid growth

DEFF Research Database (Denmark)

Elsgaard, Lars; Prieur, Daniel

2010-01-01

A thermophilic anaerobic bacterium was isolated from a sublacustrine hydrothermal vent site in Lake Tanganyika (East Africa) with recorded fluid temperatures of 66–103 °C and pH values of 7.7–8.9. The bacterium (strain TR10) was rod-shaped, about 1 by 5 μm in size, and readily formed distal...... and peptone. The optimum temperature for growth was 60 °C, while minimum and maximum temperatures were 40 and 75 °C. The pH response was alkalitolerant with optimum pH at 7.4 and 8.5 depending on the growth medium. The distinct feature of rapid proliferation and endospore formation may allow the novel...

Growing electronic documents created by researchers

Directory of Open Access Journals (Sweden)

Monika Weiss

2017-05-01

Full Text Available In the contemporary world technology is an indispensable element, both in personal and professional sphere. Despite the fact, that we do not attach significance to it in our everyday lives, the technological development engulfed us and still reminds us about that. In the face of dynamically growing digitization there occurred a new form of document – an electronic document. The study concerns the growing electronic documentation among researchers working at the Nicolaus Copernicus University in Toruń. The analysis of surveys and interviews resulted in thesis, that researchers use e-document more frequently than analog documentation. Flexibility and accessibility of this type of documents become a problem in personal papers which will be archived in the future – maybe in most part in the form of electronic documentation.

Compartmental analysis of roots in intact rapidly-growing Spergularia marina and Lactuca sativa: partial characterization of the symplasms functional in the radial transport of Na+ and K+

International Nuclear Information System (INIS)

Lazof, D.B.

1987-01-01

Techniques of compartmental analysis were adapted to the study of intact roots of rapidly-growing Spergularia marine and Lactuca sativa. Using large numbers of plants short time-courses of uptake and chase, 42 K + and 22 Na + transport could be resolved, even during a chase following a brief 10 minute labeling period. The use of intact plant systems allowed distinction of that portion of the isotope flux into the root, associated with the ion-conducting symplasms. A small compartment, which rapidly (t/sub .5/ + , accounting for the observed obtention of linear translocation rates within minutes of transferring to labeled solution. The ion contents of this compartment varied in proportion to the external ion concentration. When K + was at a high external concentration, labeled K + exchanged into this same symplasm, but chasing a short pulse indicated that K + transport to the xylem was not through a rapidly-exchanging compartment. At physiological concentrations of K + the evidence indicated that transport of K + across the root proceeded through a compartment which was not exchanging rapidly with the external medium. The rise to a linear rate of isotope translocation was gradual and translocation during a chase, following a brief pulse,was prolonged, indicating that this compartment retained its specific activity for a considerable period

The rapid formation of a large rotating disk galaxy three billion years after the Big Bang.

Science.gov (United States)

Genzel, R; Tacconi, L J; Eisenhauer, F; Schreiber, N M Förster; Cimatti, A; Daddi, E; Bouché, N; Davies, R; Lehnert, M D; Lutz, D; Nesvadba, N; Verma, A; Abuter, R; Shapiro, K; Sternberg, A; Renzini, A; Kong, X; Arimoto, N; Mignoli, M

2006-08-17

Observations and theoretical simulations have established a framework for galaxy formation and evolution in the young Universe. Galaxies formed as baryonic gas cooled at the centres of collapsing dark-matter haloes; mergers of haloes and galaxies then led to the hierarchical build-up of galaxy mass. It remains unclear, however, over what timescales galaxies were assembled and when and how bulges and disks--the primary components of present-day galaxies--were formed. It is also puzzling that the most massive galaxies were more abundant and were forming stars more rapidly at early epochs than expected from models. Here we report high-angular-resolution observations of a representative luminous star-forming galaxy when the Universe was only 20% of its current age. A large and massive rotating protodisk is channelling gas towards a growing central stellar bulge hosting an accreting massive black hole. The high surface densities of gas, the high rate of star formation and the moderately young stellar ages suggest rapid assembly, fragmentation and conversion to stars of an initially very gas-rich protodisk, with no obvious evidence for a major merger.

Impact of growing income inequality on sustainable development in China: a provincial-level analysis

NARCIS (Netherlands)

Heerink, N.B.M.; Ma, J.

2006-01-01

A growing body of literature has documented the rapidly increasing income disparities that accompanied China's economic growth in the 1980s and 1990s, and the driving factors behind this. Growing income inequality in its turn may have important implications for the accumulation of physical capital,

The Troy Microneedle: A Rapidly Separating, Dissolving Microneedle Formed by Cyclic Contact and Drying on the Pillar (CCDP).

Science.gov (United States)

Kim, Miroo; Yang, Huisuk; Kim, Suyong; Lee, Chisong; Jung, Hyungil

2015-01-01

In dissolving microneedle (DMN)-mediated therapy, complete and rapid delivery of DMNs is critical for the desired efficacy. Traditional patch-based DMN delivery, however, may fail due to incomplete delivery from insufficient skin insertion or rapid separation of microneedles due to their strong bond to the backing film. Here, we introduce the Troy microneedle, which was created by cyclic contact and drying on the pillar (CCDP), and which enabled simultaneous complete and rapid delivery of DMN. This CCDP process could be flexibly repeated to achieve a specific desired drug dose in a DMN. We evaluated DMN separation using agarose gel, and the Troy microneedle achieved more complete and rapid separation than other, more deeply dipped DMN, primarily because of the Troy's minimal junction between the DMN and pillar. When Troy microneedles were applied to pig cadaver skin, it took only 15 s for over 90% of encapsulated rhodamine B to be delivered, compared to 2 h with application of a traditional DMN patch. In vivo skin penetration studies demonstrated rapid DMN-separation of Troy microneedles still in solid form before dissolution. The Troy microneedle overcomes critical issues associated with the low penetration efficiency of flat patch-based DMN and provides an innovative route for DMN-mediated therapy, combining patient convenience with the desire drug efficacy.

Temperature fields in a growing solar silicon crystal

Directory of Open Access Journals (Sweden)

Kondrik A. I.

2012-06-01

Full Text Available The optimal thermal terms for growing by Czochralski method Si single-crystals, suitable for making photoelectric energy converters, has been defined by the computer simulation method. Dependences of temperature fields character and crystallization front form on the diameter of the crystal, stage and speed of growing, and also on correlation between diameter and height of the crystal has been studied.

A Rapid Determination of Cinnarizine in Bulk and Pharmaceutical Dosage Form by LC

Directory of Open Access Journals (Sweden)

A. A. Heda

2010-01-01

Full Text Available A simple, selective, rapid and precise reverse phase high pressure liquid chromatographic method has been developed for the estimation of cinnarizine from pharmaceutical formulation. The method was developed using MICRA-NPS C18 (length×OD×ID =33×8.0×6.0 mm, 1.5 μm column with a mobile phase consisting of acetonitrile, triethylamine buffer (adjusted to pH 4.5 with 10% w/v potassium hydroxide and tetrahydrofuran in the ratio 30:66:4 respectively, at a flow rate of 0.5 mL/min. Wavelength was fixed at 253 nm. The developed method was validated for linearity, accuracy, precision, limit of detection and limit of quantitation. The proposed method can be used for the routine estimation of cinnarizine in pharmaceutical dosage form.

The Troy Microneedle: A Rapidly Separating, Dissolving Microneedle Formed by Cyclic Contact and Drying on the Pillar (CCDP.

Directory of Open Access Journals (Sweden)

Miroo Kim

Full Text Available In dissolving microneedle (DMN-mediated therapy, complete and rapid delivery of DMNs is critical for the desired efficacy. Traditional patch-based DMN delivery, however, may fail due to incomplete delivery from insufficient skin insertion or rapid separation of microneedles due to their strong bond to the backing film. Here, we introduce the Troy microneedle, which was created by cyclic contact and drying on the pillar (CCDP, and which enabled simultaneous complete and rapid delivery of DMN. This CCDP process could be flexibly repeated to achieve a specific desired drug dose in a DMN. We evaluated DMN separation using agarose gel, and the Troy microneedle achieved more complete and rapid separation than other, more deeply dipped DMN, primarily because of the Troy's minimal junction between the DMN and pillar. When Troy microneedles were applied to pig cadaver skin, it took only 15 s for over 90% of encapsulated rhodamine B to be delivered, compared to 2 h with application of a traditional DMN patch. In vivo skin penetration studies demonstrated rapid DMN-separation of Troy microneedles still in solid form before dissolution. The Troy microneedle overcomes critical issues associated with the low penetration efficiency of flat patch-based DMN and provides an innovative route for DMN-mediated therapy, combining patient convenience with the desire drug efficacy.

Modeling of Filament Deposition Rapid Prototyping Process with a Closed form Solution

Science.gov (United States)

Devlin, Steven Leon

Fused Deposition Modeling (FDM(TM)) or fused filament fabrication (FFF) systems are extrusion-based technologies used to produce functional or near functional parts from a wide variety of plastic materials. First patented by S. Scott Crump and commercialized by Stratasys, Ltd in the early 1990s, this technology, like many additive manufacturing systems, offers significant opportunities for the design and production of complex part structures that are difficult if not impossible to produce using traditional manufacturing methods. Standing on the shoulders of a twenty-five year old invention, a rapidly growing open-source development community has exponentially driven interest in FFF technology. However, part quality often limits use in final product commercial markets. Development of accurate and repeatable methods for determining material strength in FFF produced parts is essential for wide adoption into mainstream manufacturing. This study builds on the empirical, squeeze flow and intermolecular diffusion model research conducted by David Grewell and Avraham Benatar, applying a combined model to predict auto adhesion or healing to FFF part samples. In this research, an experimental study and numerical modeling were performed in order to drive and validate a closed form heat transfer solution for extrusion processes to develop temperature field models. An extrusion-based 3D printing system, with the capacity to vary deposition speeds and temperatures, was used to fabricate the samples. Standardized specimens of Polylactic Acid (PLA) and Acrylonitrile Butadiene Styrene (ABS) filament were used to fabricate the samples with different speeds and temperatures. Micro-scanning of cut and lapped specimens, using an optical microscope, was performed to find the effect of the speed and the temperature on the geometry of the cross-sections. It was found that by increasing the speed of the extrusion printing, the area of the cross-section and the maximum thickness decrease

Carcass traits and meat quality of different slow growing and fast growing broiler chickens

Directory of Open Access Journals (Sweden)

M. Oblakova

2017-12-01

Full Text Available Abstract. The experiment was conducted in the breeder farm of department Population genetics, reproduction and technologies of poultry and rabbits at the Agriculture Institute of Stara Zagora. Five lines from the National Gene Pool of Bulgaria: line Ss (Sussex, line E (Barred Plymouth Rock, line NG (New Hampshire, line F (NG x Red Rhode Island, line L (White Plymouth Rock were used as maternal forms in the crossing schedule and line M (Cornish as a paternal form for production of slow-growing broilers. The birds were grown to 84 days. Feeding was done with compound feeds according to the age: starter (1/14 days of age, grower (14/28 days of age, finisher (28/84 days of age. By the end of the experiment, slaughter analysis was performed with 3 female and 3 male broiler chickens per group with live weight corresponding to the average of each genotype. The live weight was determined, as well as the grill weight, the weights of cuts (breast, thighs, wings, edible offal (heart, liver, gizzard and abdominal fat. On the basis of these data, the slaughter yield and body parts ratios were calculated. The data for the live body weights of birds at slaughtering indicated the highest values for group V – 4040g, followed by groups ІV and ІІ – 3271.67g and 3186.67g, respectively (p<0.05. There was a statistically significant difference between the sexes with superiority of male birds (p<0.001. In the other 3 groups, breast meat percentage ranged from 19.48 to 19.84%. The share of thighs from the grill was the greatest in slow-growing chickens from group II – 33.01%, followed by group І – 32.35%, group IV – 32.18%, and the lowest- in groups ІІІ and V (31.91% and 31.18%, respectively. The analysis of data exhibited a significant effect of the genotype on water content of breast meat (resp. Dry matter, with lower values in slow-growing birds from group III – 73.19% (p<0.05, whereas in the other groups it ranged between 73.44 and 73.62%. The

[Organization of mitochondria in the growing hyphae of Neurospora crassa].

Science.gov (United States)

Potapova, T V; Boĭtsova, L Iu; Golyshev, S A; Popinako, A V

2013-01-01

In vivo fluorescent labeling of mitochondria in Neurospora crassa showed the concentration of filamentous mitochondria within 30 μm of apex in growing hyphae. These mitochondrial assemblies propagated forward with the elongation of hyphae, split and segregated as the growing tip bifurcated and formed de novo when new branches formed farther away from the apex. The efficiency of the mitochondria concentration in the apical 30 μm zone is related to the growth rate and identical in hyphae cultivated in glucose- and sorbitol-containing media. The obtained data are discussed in connection with the behavior of microtubules in growing hyphae as well as with the electric heterogeneity of N. crassa hyphal apex described previously.

VISION AND STRATEGIC THINKING IN THE ROMANIAN FAST GROWING FIRMS MANAGEMENT

Directory of Open Access Journals (Sweden)

Nicolae BIBU

2016-07-01

Full Text Available The purpose of this paper is to present preliminary specific issues concerning the vision and the strategic thinking of the managers of Romanian fast growing firms in the years of rapid growth. This paper clarifies two research questions. (1 The first research question is what is the message of the manager's vision of the Romanian fast growing firms? Therefore, we must first verify if the managers of the Romanian fast growing firms have a concrete vision about the business they run and if so, what is the vision of the managers about the companies that they lead? (2 The second research question is what findings can be drawn about the role of strategic thinking of the managers in the management of the Romanian fast growing firms? The research that we have conducted is a qualitative research. The research method that we used is the interview. The interview is specific to qualitative research. Regarding the method of analysis that we used it is the content analysis. The research was conducted on a total of 17 Romanian fast growing firms that are located in Timiș County. The firms were identified based on a specific selection criteria set after a thorough review of the literature in the field. The 17 companies that we have analysed represent the foundation of 17 in-depth case studies, which we believe helped us to better understand what it means in the Romanian context to grow fast, through the entrepreneurs managers vision and strategic thinking. The results presented in this paper come to strengthen the results reached by other researchers in this field. The results present an image of the current Romanian context – about the role of strategic thinking of the entrepreneur manager in the management of Romanian fast growing firms. The paper presents a detailed analysis of managers' vision of the Romanian fast growing firms. The paper also presents findings about the role of strategic thinking in helping managers achieve rapid growth in the

Vasculatures in Tumors Growing From Preirradiated Tissues: Formed by Vasculogenesis and Resistant to Radiation and Antiangiogenic Therapy

International Nuclear Information System (INIS)

Chen, Fang-Hsin; Chiang, Chi-Shiun; Wang, Chun-Chieh; Fu, Sheng-Yung; Tsai, Chien-Sheng; Jung, Shih-Ming; Wen, Chih-Jen; Lee, Chung-Chi; Hong, Ji-Hong

2011-01-01

Purpose: To investigate vasculatures and microenvironment in tumors growing from preirradiated tissues (pre-IR tumors) and study the vascular responses of pre-IR tumors to radiation and antiangiogenic therapy. Methods and Materials: Transgenic adenocarcinoma of the mouse prostate C1 tumors were implanted into unirradiated or preirradiated tissues and examined for vascularity, hypoxia, and tumor-associated macrophage (TAM) infiltrates by immunohistochemistry. The origin of tumor endothelial cells was studied by green fluorescent protein-tagged bone marrow (GFP-BM) transplantation. The response of tumor endothelial cells to radiation and antiangiogenic agent was evaluated by apoptotic assay. Results: The pre-IR tumors had obvious tumor bed effects (TBE), with slower growth rate, lower microvascular density (MVD), and more necrotic and hypoxic fraction compared with control tumors. The vessels were dilated, tightly adhered with pericytes, and incorporated with transplanted GFP-BM cells. In addition, hypoxic regions became aggregated with TAM. As pre-IR tumors developed, the TBE was overcome at the tumor edge where the MVD increased, TAM did not aggregate, and the GFP-BM cells did not incorporate into the vessels. The vessels at tumor edge were more sensitive to the following ionizing radiation and antiangiogenic agent than those in the central low MVD regions. Conclusions: This study demonstrates that vasculatures in regions with TBE are mainly formed by vasculogenesis and resistant to radiation and antiangiogenic therapy. Tumor bed effects could be overcome at the edge of larger tumors, but where vasculatures are formed by angiogenesis and sensitive to both treatments. Vasculatures formed by vasculogenesis should be the crucial target for the treatment of recurrent tumors after radiotherapy.

Cultural systems for growing potatoes in space

Science.gov (United States)

Tibbitts, T.; Bula, R.; Corey, R.; Morrow, R.

1988-01-01

Higher plants are being evaluated for life support to provide needed food, oxygen and water as well as removal of carbon dioxide from the atmosphere. The successful utilization of plants in space will require the development of not only highly productive growing systems but also highly efficient bioregenerative systems. It will be necessary to recycle all inedible plant parts and all human wastes so that the entire complement of elemental compounds can be reused. Potatoes have been proposed as one of the desirable crops because they are 1) extremely productive, yielding more than 100 metric tons per hectare from field plantings, 2) the edible tubers are high in digestible starch (70%) and protein (10%) on a dry weight basis, 3) up to 80% of the total plant production is in tubers and thus edible, 4) the plants are easily propagated either from tubers or from tissue culture plantlets, 5) the tubers can be utilized with a minimum of processing, and 6) potatoes can be prepared in a variety of different forms for the human diet (Tibbitts et al., 1982). However potatoes have a growth pattern that complicates the development of growing the plants in controlled systems. Tubers are borne on underground stems that are botanically termed 'rhizomes', but in common usage termed 'stolons'. The stolons must be maintained in a dark, moist area with sufficient provision for enlargement of tubers. Stems rapidly terminate in flowers forcing extensive branching and spreading of plants so that individual plants will cover 0.2 m2 or more area. Thus the growing system must be developed to provide an area that is darkened for tuber and root growth and of sufficient size for plant spread. A system developed for growing potatoes, or any plants, in space will have certain requirements that must be met to make them a useful part of a life support system. The system must 1) be constructed of materials, and involve media, that can be reused for many successive cycles of plant growth, 2

The FIR-Radio Correlation in Rapidly Star-Forming Galaxies: The Spectral Index Problem and Proton Calorimetry

Science.gov (United States)

Thompson, Todd A.; Lacki, Brian C.

We review the physics of the FIR-radio correlation (FRC) of star-forming galaxies, focusing on "electron calorimetry" as an explanation. We emphasize the importance of the "spectral index problem"—that galaxies have flatter GHz synchrotron spectra than predicted in the strong-cooling calorimeter limit. We argue that these shallow spectra require significant bremsstrahlung and/or ionization losses for the primary and secondary CR electron/positron populations. This then implies that CR protons suffer strong pionic losses before escape in dense starburst galaxies ("proton calorimetry"), and that these systems should be gamma-ray bright, forming a FIR-gamma-ray correlation. Implications for the diffuse non-thermal cosmic gamma-ray and neutrino backgrounds are mentioned. Caveats and uncertainties, as well as other solutions to the "spectral index problem" such as rapid advection of CRs in starburst superwinds, are highlighted.

Transport mechanisms in low-resistance ohmic contacts to p-InP formed by rapid thermal annealing

DEFF Research Database (Denmark)

Clausen, Thomas; Leistiko, Otto

1993-01-01

process is related to interdiffusion and compound formation between the metal elements and the InP. The onset of low specific contact resistance is characterized by a change in the dominant transport mechanism; from predominantly a combination of thermionic emission and field emission to purely thermionic......Thermionic emission across a very small effective Schottky barrier (0-0.2 eV) are reported as being the dominant transport process mechanism in very low-resistance ohmic contacts for conventional AuZn(Ni) metallization systems top-InP formed by rapid thermal annealing. The barrier modulation...

FAST-GROWING COMPANIES FROM TIMIS COUNTRY: DOES THE AGE MATTER?

Directory of Open Access Journals (Sweden)

ALB MARIA

2015-03-01

Full Text Available This paper examines the relation between the company’s age and its growth and analyses the influence of age on growth by studying a specific group of companies, namely fast-growing companies from the Timis County, Romania. We have studied the performance of the fast-growing companies in the period of 2010-2013 using the STATA IC 12 software application. A linear regression analysis model with two variables was used. The dependent variable used was the rapid growth of the company, measured by the growth rate of the turnover and the independent variable used was the age of the company, measured by the number of years. The model was tested using the number of employees as a control variable. This paper’s conclusion is in agreement with many other findings from the literature in this subject. The presented results show that the turnover growth rates in the Romanian fast-growing companies tend to drop from one year to another, as the companies grow older.

A method of LED free-form tilted lens rapid modeling based on scheme language

Science.gov (United States)

Dai, Yidan

2017-10-01

According to nonimaging optical principle and traditional LED free-form surface lens, a new kind of LED free-form tilted lens was designed. And a method of rapid modeling based on Scheme language was proposed. The mesh division method was applied to obtain the corresponding surface configuration according to the character of the light source and the desired energy distribution on the illumination plane. Then 3D modeling software and the Scheme language programming are used to generate lens model respectively. With the help of optical simulation software, a light source with the size of 1mm*1mm*1mm in volume is used in experiment, and the lateral migration distance of illumination area is 0.5m, in which total one million rays are computed. We could acquire the simulated results of both models. The simulated output result shows that the Scheme language can prevent the model deformation problems caused by the process of the model transfer, and the degree of illumination uniformity is reached to 82%, and the offset angle is 26°. Also, the efficiency of modeling process is greatly increased by using Scheme language.

Food (In)Security in Rapidly Urbanising, Low-Income Contexts

OpenAIRE

Cecilia Tacoli

2017-01-01

Urbanisation in low and middle-income nations presents both opportunities and immense challenges. As urban centres grow rapidly, inadequate housing and the lack of basic infrastructure and services affect a large and growing proportion of their population. There is also a growing body of evidence on urban poverty and its links with environmental hazards. There is, however, limited knowledge of how these challenges affect the ways in which poor urban residents gain access to food and secure he...

Growing families in a shrinking world: legal and ethical challenges in cross-border surrogacy.

Science.gov (United States)

Crockin, Susan L

2013-12-01

Crossing national borders to have children is a rapidly growing phenomenon, fuelled by restrictions on access and technologies in some countries and for some patients, by high costs in others, and all generating a burgeoning multibillion dollar international industry. Cross-border gestational surrogacy is one form of family building that challenges legal, policy and ethical norms between countries and puts both intended parents and gestational surrogates at risk, and can leave the offspring of these arrangements vulnerable in a variety of ways, including parent-child, immigration and citizenship status. The widely varying political, religious and legal views amongst countries make line drawing and rule making challenging. This article reviews recent court decisions about and explores the legal dimensions of cross-border surrogacy. Copyright © 2013 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

Organisational Factors of Rapid Growth of Slovenian Dynamic Enterprises

Directory of Open Access Journals (Sweden)

Pšeničny Viljem

2013-01-01

Full Text Available The authors provide key findings on the internal and external environmental factors of growth that affect the rapid growth of dynamic enterprises in relation to individual key organisational factors or functions. The key organisational relationships in a growing enterprise are upgraded with previous research findings and identified key factors of rapid growth through qualitative and quantitative analysis based on the analysis of 4,511 dynamic Slovenian enterprises exhibiting growth potential. More than 250 descriptive attributes of a sample of firms from 2011 were also used for further qualitative analysis and verification of key growth factors. On the basis of the sample (the study was conducted with 131 Slovenian dynamic enterprises, the authors verify whether these factors are the same as the factors that were studied in previous researches. They also provide empirical findings on rapid growth factors in relation to individual organisational functions: administration - management - implementation (entrepreneur - manager - employees. Through factor analysis they look for the correlation strength between individual variables (attributes that best describe each factor of rapid growth and that relate to the aforementioned organisational functions in dynamic enterprises. The research findings on rapid growth factors offer companies the opportunity to consider these factors during the planning and implementation phases of their business, to choose appropriate instruments for the transition from a small fast growing firm to a professionally managed growing company, to stimulate growth and to choose an appropriate growth strategy and organisational factors in order to remain, or become, dynamic enterprises that can further contribute to the preservation, growth and development of the Slovenian economy

Rapid prototyping framework for robot-assisted training of autistic children

NARCIS (Netherlands)

Kim, Mingyu; Barakova, E.I.; Lourens, T.

2014-01-01

Research in uptake and actual use of robots in socially assistive tasks is rapidly growing. However, practical applications lack behind due to the enormous effort to create meaningful behaviours. This paper describes a rapid prototyping framework for robot-assisted training of children with Autism

Formation of primordial supermassive stars by rapid mass accretion

Energy Technology Data Exchange (ETDEWEB)

Hosokawa, Takashi; Yoshida, Naoki [Department of Physics and Research Center for the Early Universe, The University of Tokyo, Tokyo 113-0033 (Japan); Yorke, Harold W. [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States); Inayoshi, Kohei; Omukai, Kazuyuki, E-mail: takashi.hosokawa@phys.s.u-tokyo.ac.jp, E-mail: hosokwtk@gmail.com [Department of Physics, Kyoto University, Kyoto 606-8502 (Japan)

2013-12-01

Supermassive stars (SMSs) forming via very rapid mass accretion ( M-dot {sub ∗}≳0.1 M{sub ⊙} yr{sup −1}) could be precursors of supermassive black holes observed beyond a redshift of about six. Extending our previous work, here we study the evolution of primordial stars growing under such rapid mass accretion until the stellar mass reaches 10{sup 4–5} M {sub ☉}. Our stellar evolution calculations show that a star becomes supermassive while passing through the 'supergiant protostar' stage, whereby the star has a very bloated envelope and a contracting inner core. The stellar radius increases monotonically with the stellar mass until ≅ 100 AU for M {sub *} ≳ 10{sup 4} M {sub ☉}, after which the star begins to slowly contract. Because of the large radius, the effective temperature is always less than 10{sup 4} K during rapid accretion. The accreting material is thus almost completely transparent to the stellar radiation. Only for M {sub *} ≳ 10{sup 5} M {sub ☉} can stellar UV feedback operate and disturb the mass accretion flow. We also examine the pulsation stability of accreting SMSs, showing that the pulsation-driven mass loss does not prevent stellar mass growth. Observational signatures of bloated SMSs should be detectable with future observational facilities such as the James Webb Space Telescope. Our results predict that an inner core of the accreting SMS should suffer from the general relativistic instability soon after the stellar mass exceeds 10{sup 5} M {sub ☉}. An extremely massive black hole should form after the collapse of the inner core.

Transmutation of stable isotopes and deactivation of radioactive waste in growing biological systems

International Nuclear Information System (INIS)

Vysotskii, Vladimir I.; Kornilova, Alla A.

2013-01-01

Highlights: ► The phenomena of isotope transmutation in growing microbiological cultures were investigated. ► Transmutation in microbiological associations is 20 times more effective than in pure cultures. ► Transmutation of radioactive nuclei to stable isotopes in such associations was investigated. ► The most accelerated rate of Cs 137 to stable Ba 138 isotope transmutation was 310 days. ► “Microbiological deactivation” may be used for deactivation of Chernobyl and Fukushima areas. - Abstract: The report presents the results of qualifying examinations of stable and radioactive isotopes transmutation processes in growing microbiological cultures. It is shown that transmutation of stable isotopes during the process of growth of microbiological cultures, at optimal conditions in microbiological associations, is 20 times more effective than the same transmutation process in the form of “one-line” (pure) microbiological cultures. In the work, the process of direct, controlled decontamination of highly active intermediate lifetime and long-lived reactor isotopes (reactor waste) through the process of growing microbiological associations has been studied. In the control experiment (flask with active water but without microbiological associations), the “usual” law of nuclear decay applies, and the life-time of Cs 137 isotope was about 30 years. The most rapidly increasing decay rate, which occurred with a lifetime τ * ≈ 310 days (involving an increase in rate, and decrease in lifetime by a factor of 35 times) was observed in the presence of Ca salt in closed flask with active water contained Cs 137 solution and optimal microbiological association

But How Do You Grow Plants Without Dirt?

Science.gov (United States)

Howells, Ronald F.

1978-01-01

Describes a class project on hydroponic farming (growing plants in water and in organic nutrients rather than dirt). Students formed a corporation to raise necessary funds and paid dividends from the proceeds earned selling the crop. (JMB)

Mycobacterium lutetiense sp. nov., Mycobacterium montmartrense sp. nov. and Mycobacterium arcueilense sp. nov., members of a novel group of non-pigmented rapidly growing mycobacteria recovered from a water distribution system.

Science.gov (United States)

Konjek, Julie; Souded, Sabiha; Guerardel, Yann; Trivelli, Xavier; Bernut, Audrey; Kremer, Laurent; Welte, Benedicte; Joyeux, Michel; Dubrou, Sylvie; Euzeby, Jean-Paul; Gaillard, Jean-Louis; Sapriel, Guillaume; Heym, Beate

2016-09-01

From our recent survey of non-pigmented rapidly growing mycobacteria in the Parisian water system, three groups of isolates (taxons 1-3) corresponding to possible novel species were selected for taxonomic study. The three taxa each formed creamy white, rough colonies, had an optimal growth temperature of 30 °C, hydrolyzed Tween 80, were catalase-positive at 22 °C and expressed arylsulfatase activity. All three were susceptible to amikacin, ciprofloxacin and tigecycline. The three taxa produced specific sets of mycolic acids, including one family that has never previously been described, as determined by thin layer chromatography and nuclear magnetic resonance. The partial rpoB sequences (723 bp) showed 4-6 % divergence from each other and more than 5 % differences from the most similar species. Partial 16S rRNA gene sequences showed 99 % identity within each species. The most similar sequences for 16S rRNA genes (98-99 % identity over 1444-1461 bp) were found in the Mycobacterium fortuitum group, Mycobacterium septicum and Mycobacterium farcinogenes. The three taxa formed a new clade (bootstrap value, 99 %) on trees reconstructed from concatenated partial 16S rRNA, hsp65 and rpoB sequences. The above results led us to propose three novel species for the three groups of isolates, namely Mycobacterium lutetiense sp. nov. [type strain 071T=ParisRGMnew_1T (CIP 110656T=DSM 46713T)], Mycobacterium montmartrense sp. nov. [type strain 196T=ParisRGMnew_2T (CIP 110655T=DSM 46714T)] and Mycobacteriu marcueilense sp. nov. [type strain of 269T=ParisRGMnew_3T (CIP 110654T=DSM 46715T)].

Endocide-Induced Abnormal Growth Forms of Invasive Giant Salvinia (Salvinia molesta).

Science.gov (United States)

Li, Shiyou; Wang, Ping; Su, Zushang; Lozano, Emily; LaMaster, Olivia; Grogan, Jason B; Weng, Yuhui; Decker, Thomas; Findeisen, John; McGarrity, Monica

2018-05-22

Giant salvinia (Salvinia molesta) is one of the most noxious invasive species in the world. The fern is known to have primary, secondary, and tertiary growth forms, which are also commonly hypothesized as growth stages. The identification of these forms is primarily based on the size and folding status of the floating leaves. However, we identified 12 forms in the greenhouse and the field. Our experiments showed that the folding of floating leaves is a reversible trait dependent on water access. The floating leaves quickly fold in response to water shortage, reducing water loss and needs, decreasing growth, and avoiding trichome damage. The leaves re-open to allow trichomes repel water and enhance growth when having adequate water supply. Larger secondary or tertiary forms do not produce small-leaf primary forms without high intensity stress. These results do not support the hypothesis that three growth forms represent sequential growth stages. The abnormal small-leaf forms are the result of endocide-induced autotoxicity and some of them never grow into other forms. The development of abnormal forms and reversible leaf folding strategy in response to high stress along with rapid asexual reproduction are major adaptive traits contributing to the invasiveness of S. molesta.

Do teachers and students get the Ed-Tech products they need: The challenges of Ed-Tech procurement in a rapidly growing market

Directory of Open Access Journals (Sweden)

Jennifer Morrison

2015-03-01

Full Text Available Ed-tech courseware products to support teaching and learning are being developed and made available for acquisition by school districts at a rapid rate. In this growing market, developers and providers face challenges with making their products visible to customers, while school district stakeholders must grapple with “discovering” which products of the many available best address their instructional needs. The present study presents the experiences with and perceptions about the procurement process from 47 superintendents representing diverse school districts in the U. S. Results indicate that, while improvements are desired in many aspects of the procurement process, the superintendents, overall, believe that, once desired products are identified, they are generally able to acquire them. Difficulties lie in tighter budgets, discovering products that are potentially the best choices, and evaluating the effectiveness of the products selected as options. These findings are presented and interpreted in relation to five major “Action Points” in the procurement process, and also with regard to implications for evaluating how educational technology impacts K-12 instruction.

Rapid, dynamic segregation of core forming melts: Results from in-situ High Pressure- High Temperature X-ray Tomography

Science.gov (United States)

Watson, H. C.; Yu, T.; Wang, Y.

2011-12-01

The timing and mechanisms of core formation in the Earth, as well as in Earth-forming planetesimals is a problem of significant importance in our understanding of the early evolution of terrestrial planets . W-Hf isotopic signatures in meteorites indicate that core formation in small pre-differentiated planetesimals was relatively rapid, and occurred over the span of a few million years. This time scale is difficult to achieve by percolative flow of the metallic phase through a silicate matrix in textural equilibrium. It has been suggested that during this active time in the early solar system, dynamic processes such as impacts may have caused significant deformation in the differentiating planetesimals, which could lead to much higher permeability of the core forming melts. Here, we have measured the change in permeability of core forming melts in a silicate matrix due to deformation. Mixtures of San Carlos olivine and FeS close to the equilibrium percolation threshold (~5 vol%FeS) were pre-synthesized to achieve an equilibrium microstructure, and then loaded into the rotational Drickamer apparatus at GSE-CARS, sector 13-BMD, at the Advanced Photon Source (Argonne National Laboratory). The samples were subsequently pressed to ~2GPa, and heated to 1100°C. Alternating cycles of rotation to collect X-ray tomography images, and twisting to deform the sample were conducted until the sample had been twisted by 1080°. Qualitative and quantitative analyses were performed on the resulting 3-dimensional x-ray tomographic images to evaluate the effect of shear deformation on permeability and migration velocity. Lattice-Boltzmann simulations were conducted, and show a marked increase in the permeability with increasing deformation, which would allow for much more rapid core formation in planetesimals.

Myofibroblastoma: An Unusual Rapidly Growing Benign Tumour in a Male Breast

International Nuclear Information System (INIS)

Rafique, A.; Arshad, A.

2013-01-01

Myofibroblastoma is an unusual benign tumour of the breast predominantly seen in men in their sixth to seventh decade. The gross appearance is that of a well circumscribed nodule, characteristically small, seldom exceeding 3 cm. We present a case of an unusually large myofibroblastoma, which mimicked a malignant breast tumour. A 40 years old male, known case of tetralogy of Fallot, was operated in infancy in abroad, presented with a rapid enlargement of right breast over 5 - 6 weeks. Examination revealed a firm 10 cm hemispherical lump occupying the whole of the right breast with normal overlying skin. Since core biopsy was inconclusive, a subcutaneous mastectomy was performed to remove the tumour, which weighed 500 gms. Histopathology and immunocytochemistry revealed a mixed classical and collagenised type of myofibroblastoma. The patient is well with no evidence of recurrence. (author)

Czochralski method of growing single crystals. State-of-art

International Nuclear Information System (INIS)

Bukowski, A.; Zabierowski, P.

1999-01-01

Modern Czochralski method of single crystal growing has been described. The example of Czochralski process is given. The advantages that caused the rapid progress of the method have been presented. The method limitations that motivated the further research and new solutions are also presented. As the example two different ways of the technique development has been described: silicon single crystals growth in the magnetic field; continuous liquid feed of silicon crystals growth. (author)

The Slow-Growing Orange, A Demographer’s Look at Future Los Angeles,

Science.gov (United States)

1984-04-01

and even some downtown Los Angeles neighborhoods, through " gentrification "--will grow rapidly at the expense of others. A second dramatic aspect of...shores. Modern developments in commuaications and transportation, which have enabled us to expand trade with Asia and Latin America, have also

Setting Mechanical Properties of High Strength Steels for Rapid Hot Forming Processes

Science.gov (United States)

Löbbe, Christian; Hering, Oliver; Hiegemann, Lars; Tekkaya, A. Erman

2016-01-01

Hot stamping of sheet metal is an established method for the manufacturing of light weight products with tailored properties. However, the generally-applied continuous roller furnace manifests two crucial disadvantages: the overall process time is long and a local setting of mechanical properties is only feasible through special cooling techniques. Hot forming with rapid heating directly before shaping is a new approach, which not only reduces the thermal intervention in the zones of critical formability and requested properties, but also allows the processing of an advantageous microstructure characterized by less grain growth, additional fractions (e.g., retained austenite), and undissolved carbides. Since the austenitization and homogenization process is strongly dependent on the microstructure constitution, the general applicability for the process relevant parameters is unknown. Thus, different austenitization parameters are analyzed for the conventional high strength steels 22MnB5, Docol 1400M, and DP1000 in respect of the mechanical properties. In order to characterize the resulting microstructure, the light optical and scanning electron microscopy, micro and macro hardness measurements, and the X-ray diffraction are conducted subsequent to tensile tests. The investigation proves not only the feasibility to adjust the strength and ductility flexibly, unique microstructures are also observed and the governing mechanisms are clarified. PMID:28773354

Effects of landscape change on fish assemblage structure in a rapidly growing metropolitan area in North Carolina, USA

Science.gov (United States)

Kennen, J.G.; Chang, M.; Tracy, B.H.

2005-01-01

We evaluated a comprehensive set of natural and land-use attributes that represent the major facets of urban development at fish monitoring sites in the rapidly growing Raleigh-Durham, North Carolina metropolitan area. We used principal component and correlation analysis to obtain a nonredundant subset of variables that extracted most variation in the complete set. With this subset of variables, we assessed the effect of urban growth on fish assemblage structure. We evaluated variation in fish assemblage structure with nonmetric multidimensional scaling (NMDS). We used correlation analysis to identify the most important environmental and landscape variables associated with significant NMDS axes. The second NMDS axis is related to many indices of land-use/land-cover change and habitat. Significant correlations with proportion of largest forest patch to total patch size (r = -0.460, P < 0.01), diversity of patch types (r = 0.554, P < 0.001), and population density (r = 0.385, P < 0.05) helped identify NMDS axis 2 as a disturbance gradient. Positive and negative correlations between the abundance of redbreast sunfish Lepomis auritus and bluehead chub Nocomis leptocephalus, respectively, and NMDS axis 2 also were evident. The North Carolina index of biotic integrity and many of its component metrics were highly correlated with urbanization. These results indicate that aquatic ecosystem integrity would be optimized by a comprehensive integrated management strategy that includes the preservation of landscape function by maximizing the conservation of contiguous tracts of forested lands and vegetative cover in watersheds. ?? 2005 by the American Fisheries Society.

THE IMPORTANCE OF LEGAL ORGANISATION OF RAPIDLY GROWING COMPANIES FOR INTERNATIONAL BUSINESS COMPETITIVENESS

Directory of Open Access Journals (Sweden)

Riko Novak

2014-09-01

Full Text Available This article discusses the importance of a company’s legal form for the process of internationalisation using a sample of 1577 Slovenian companies. We refer to previous studies and on the basis of additional statistical data evaluate whether the choice of corporate legal structure influences a company’s ability to compete internationally. In the domestic market, most companies operate as limited liability companies; this is also the most frequent legal form in which companies enter foreign markets. We conclude that the form by itself does not influence the decision to go international.

EVIDENCE FOR THREE ACCRETING BLACK HOLES IN A GALAXY AT z ∼ 1.35: A SNAPSHOT OF RECENTLY FORMED BLACK HOLE SEEDS?

International Nuclear Information System (INIS)

Schawinski, Kevin; Urry, Meg; Treister, Ezequiel; Simmons, Brooke; Natarajan, Priyamvada; Glikman, Eilat

2011-01-01

One of the key open questions in cosmology today pertains to understanding when, where, and how supermassive black holes form. While it is clear that mergers likely play a significant role in the growth cycles of black holes, the issue of how supermassive black holes form, and how galaxies grow around them, still needs to be addressed. Here, we present Hubble Space Telescope Wide Field Camera 3/IR grism observations of a clumpy galaxy at z = 1.35, with evidence for 10 6 -10 7 M ☉ rapidly growing black holes in separate sub-components of the host galaxy. These black holes could have been brought into close proximity as a consequence of a rare multiple galaxy merger or they could have formed in situ. Such holes would eventually merge into a central black hole as the stellar clumps/components presumably coalesce to form a galaxy bulge. If we are witnessing the in situ formation of multiple black holes, their properties can inform seed formation models and raise the possibility that massive black holes can continue to emerge in star-forming galaxies as late as z = 1.35 (4.8 Gyr after the big bang).

Growing networks with mixed attachment mechanisms

International Nuclear Information System (INIS)

Shao Zhigang; Zou Xianwu; Tan Zhijie; Jin Zhunzhi

2006-01-01

Networks grow and evolve when new nodes and links are added in. There are two methods to add the links: uniform attachment and preferential attachment. We take account of the addition of links with mixed attachment between uniform attachment and preferential attachment in proportion. By using numerical simulations and analysis based on a continuum theory, we obtain that the degree distribution P(k) has an extended power-law form P(k) ∼ (k + k 0 ) -γ . When the number of edges k of a node is much larger than a certain value k 0 , the degree distribution reduces to the power-law form P(k) ∼ k -γ ; and when k is much smaller than k 0 , the degree distribution degenerates into the exponential form P(k)∼exp(-yk/k 0 ). It has been found that degree distribution possesses this extended power-law form for many real networks, such as the movie actor network, the citation network of scientific papers and diverse protein interaction networks

Grow, Baby, Grow

Science.gov (United States)

Maybe you quit smoking during your pregnancy. Or maybe you struggled and weren’t able to stay quit. Now that your baby is here, trying to stay away from smoking is still important. That’s because the chemicals in smoke can make it harder for your baby to grow like he or she should.

Formation of the distributed NiSiGe nanocrystals nonvolatile memory formed by rapidly annealing in N2 and O2 ambient

International Nuclear Information System (INIS)

Hu, Chih-Wei; Chang, Ting-Chang; Tu, Chun-Hao; Chiang, Cheng-Neng; Lin, Chao-Cheng; Chen, Min-Chen; Chang, Chun-Yen; Sze, Simon M.; Tseng, Tseung-Yuen

2010-01-01

In this work, electrical characteristics of the Ge-incorporated Nickel silicide (NiSiGe) nanocrystals memory device formed by the rapidly thermal annealing in N 2 and O 2 ambient have been studied. The trapping layer was deposited by co-sputtering the NiSi 2 and Ge, simultaneously. Transmission electron microscope results indicate that the NiSiGe nanocrystals were formed obviously in both the samples. The memory devices show obvious charge-storage ability under capacitance-voltage measurement. However, it is found that the NiSiGe nanocrystals device formed by annealing in N 2 ambient has smaller memory window and better retention characteristics than in O 2 ambient. Then, related material analyses were used to confirm that the oxidized Ge elements affect the charge-storage sites and the electrical performance of the NCs memory.

In Vitro Comparison of Ertapenem, Meropenem, and Imipenem against Isolates of Rapidly Growing Mycobacteria and Nocardia by Use of Broth Microdilution and Etest.

Science.gov (United States)

Brown-Elliott, Barbara A; Killingley, Jessica; Vasireddy, Sruthi; Bridge, Linda; Wallace, Richard J

2016-06-01

We compared the activities of the carbapenems ertapenem, meropenem, and imipenem against 180 isolates of rapidly growing mycobacteria (RGM) and 170 isolates of Nocardia using the Clinical and Laboratory Standards Institute (CLSI) guidelines. A subset of isolates was tested using the Etest. The rate of susceptibility to ertapenem and meropenem was limited and less than that to imipenem for the RGM. Analysis of major and minor discrepancies revealed that >90% of the isolates of Nocardia had higher MICs by the broth microdilution method than by Etest, in contrast to the lower broth microdilution MICs seen for >80% of the RGM. Imipenem remains the most active carbapenem against RGM, including Mycobacterium abscessus subsp. abscessus For Nocardia, imipenem was significantly more active only against Nocardia farcinica Although there may be utility in testing the activities of the newer carbapenems against Nocardia, their activities against the RGM should not be routinely tested. Testing by Etest is not recommended by the CLSI. Copyright © 2016, American Society for Microbiology. All Rights Reserved.

How Cloud Computing can help SMEs to grow faster?

OpenAIRE

Hasan, Ahmed Anwar

2010-01-01

In recent years, Cloud computing has successfully created hype and lots of people think that cloud computing might be the next big thing. The cloud platform is growing rapidly and lots of cloud service provider companies are coming up with huge number of innovative ideas where they are addressing specific needs of different organisations. The cloud computing is based on a service model architecture which is highly customisable and can fit into a specific or unique business process. Cloud comp...

Metabolomic response of Calotropis procera growing in the desert to changes in water availability.

Science.gov (United States)

Ramadan, Ahmed; Sabir, Jamal S M; Alakilli, Saleha Y M; Shokry, Ahmed M; Gadalla, Nour O; Edris, Sherif; Al-Kordy, Magdy A; Al-Zahrani, Hassan S; El-Domyati, Fotouh M; Bahieldin, Ahmed; Baker, Neil R; Willmitzer, Lothar; Irgang, Susann

2014-01-01

Water availability is a major limitation for agricultural productivity. Plants growing in severe arid climates such as deserts provide tools for studying plant growth and performance under extreme drought conditions. The perennial species Calotropis procera used in this study is a shrub growing in many arid areas which has an exceptional ability to adapt and be productive in severe arid conditions. We describe the results of studying the metabolomic response of wild C procera plants growing in the desert to a one time water supply. Leaves of C. procera plants were taken at three time points before and 1 hour, 6 hours and 12 hours after watering and subjected to a metabolomics and lipidomics analysis. Analysis of the data reveals that within one hour after watering C. procera has already responded on the metabolic level to the sudden water availability as evidenced by major changes such as increased levels of most amino acids, a decrease in sucrose, raffinose and maltitol, a decrease in storage lipids (triacylglycerols) and an increase in membrane lipids including photosynthetic membranes. These changes still prevail at the 6 hour time point after watering however 12 hours after watering the metabolomics data are essentially indistinguishable from the prewatering state thus demonstrating not only a rapid response to water availability but also a rapid response to loss of water. Taken together these data suggest that the ability of C. procera to survive under the very harsh drought conditions prevailing in the desert might be associated with its rapid adjustments to water availability and losses.

Torsion of a growing shaft

Directory of Open Access Journals (Sweden)

Alexander V. Manzhirov

2017-12-01

Full Text Available The torsion of a shaft by rigid disks is considered. The shaft has the form of circular cylinder. Two rigid disks are attached to its end faces. The process of continuous growth of such shaft under the influence of twisting torques applied to the disks is studied. Dual series equations which reflect the mathematical content of the problem at the different stages of the growing process are derived and solved. Results of the numerical analysis and singularities of the qualitative mechanical behaviour of the fundamental characteristics are discussed.

Effect of anti-sclerostin therapy and osteogenesis imperfecta on tissue-level properties in growing and adult mice while controlling for tissue age.

Science.gov (United States)

Sinder, Benjamin P; Lloyd, William R; Salemi, Joseph D; Marini, Joan C; Caird, Michelle S; Morris, Michael D; Kozloff, Kenneth M

2016-03-01

Bone composition and biomechanics at the tissue-level are important contributors to whole bone strength. Sclerostin antibody (Scl-Ab) is a candidate anabolic therapy for the treatment of osteoporosis that increases bone formation, bone mass, and bone strength in animal studies, but its effect on bone quality at the tissue-level has received little attention. Pre-clinical studies of Scl-Ab have recently expanded to include diseases with altered collagen and material properties such as osteogenesis imperfecta (OI). The purpose of this study was to investigate the role of Scl-Ab on bone quality by determining bone material composition and tissue-level mechanical properties in normal wild type (WT) tissue, as well as mice with a typical OI Gly➔Cys mutation (Brtl/+) in type I collagen. Rapidly growing (3-week-old) and adult (6-month-old) WT and Brtl/+ mice were treated for 5weeks with Scl-Ab. Fluorescent guided tissue-level bone composition analysis (Raman spectroscopy) and biomechanical testing (nanoindentation) were performed at multiple tissue ages. Scl-Ab increased mineral to matrix in adult WT and Brtl/+ at tissue ages of 2-4wks. However, no treatment related changes were observed in mineral to matrix levels at mid-cortex, and elastic modulus was not altered by Scl-Ab at any tissue age. Increased mineral-to-matrix was phenotypically observed in adult Brtl/+ OI mice (at tissue ages>3wks) and rapidly growing Brtl/+ (at tissue ages>4wks) mice compared to WT. At identical tissue ages defined by fluorescent labels, adult mice had generally lower mineral to matrix ratios and a greater elastic modulus than rapidly growing mice, demonstrating that bone matrix quality can be influenced by animal age and tissue age alike. In summary, these data suggest that Scl-Ab alters the matrix chemistry of newly formed bone while not affecting the elastic modulus, induces similar changes between Brtl/+ and WT mice, and provides new insight into the interaction between tissue age and

A closed form solution for vulnerable options with Heston’s stochastic volatility

International Nuclear Information System (INIS)

Lee, Min-Ku; Yang, Sung-Jin; Kim, Jeong-Hoon

2016-01-01

Over-the-counter stock markets in the world have been growing rapidly and vulnerability to default risks of option holders traded in the over-the-counter markets became an important issue, in particular, since the global finance crisis and Eurozone crisis. This paper studies the pricing of European-type vulnerable options when the underlying asset follows the Heston dynamics. In this paper, we obtain a closed form analytic formula of the option price as a stochastic volatility extension of the classical Heston formula and find how the stochastic volatility effect on the Black–Scholes price as well as on the decreasing speed of the option price with credit risk depends on moneyness.

Effect of Rapid Maxillary Expansion on Glenoid Fossa and Condyle-Fossa Relationship in Growing Patients (MEGP): Study Protocol for a Controlled Clinical Trial

Science.gov (United States)

Ghoussoub, Mona Sayegh; Rifai, Khaldoun; Garcia, Robert; Sleilaty, Ghassan

2018-01-01

Aims and Objectives: Rapid maxillary expansion (RME) is an orthodontic nonsurgical procedure aiming at increasing the width of the maxilla by opening mainly the intermaxillary suture in patients presenting a transverse maxillary skeletal deficiency. The objectives of the current prospective controlled clinical and radiographic study are to evaluate the hypothesis that RME in growing patients will result in radiographic changes at the level of interglenoid fossa distance, condyle-fossa relationship, and nasal cavity widths compared to the group who received no treatment initially and served as untreated control. Materials and Methods: In this prospective controlled clinical and radiographic study, forty healthy growing patients selected from a school-based population following a large screening campaign, ranging in age between 8 and 13 years, presenting a maxillary constriction with bilateral crossbite, and candidates for RME are being recruited. The first group will include participants willing to undergo treatment (n = 25) and the other group will include those inclined to postpone (n = 15). Results: The primary outcome is to compare radiologically the interglenoid fossa distance and the condyle-fossa relationship; nasal cavity width will be a secondary outcome. A multivariable analysis of Covariance model will be used, with the assessment of the time by group interaction, using age as covariate. The project protocol was reviewed and approved by the Ethics Committee of the Lebanese University, National Institute in Lebanon (CUEMB process number 31/04/2015). The study is funded by the Lebanese University and Centre National de Recherche Scientifique, Lebanon (Number: 652 on 14/04/2016). Conclusion: This prospective controlled clinical trial will give information about the effect of RME on the glenoid fossa and condyle-fossa relationship and its impact on the nasal cavity width. Trial Registration: Retrospectively registered in BioMed Central (DOI10.1186/ISRCTN

Rapid Prototyping by Single Point Incremental Forming of Sheet Metal

DEFF Research Database (Denmark)

Skjødt, Martin

2008-01-01

. The process is incremental forming since plastic deformation takes place in a small local zone underneath the forming tool, i.e. the sheet is formed as a summation of the movement of the local plastic zone. The process is slow and therefore only suited for prototypes or small batch production. On the other...... in the plastic zone. Using these it is demonstrated that the growth rate of accumulated damage in SPIF is small compared to conventional sheet forming processes. This combined with an explanation why necking is suppressed is a new theory stating that SPIF is limited by fracture and not necking. The theory...... SPIF. A multi stage strategy is presented which allows forming of a cup with vertical sides in about half of the depth. It is demonstrated that this results in strain paths which are far from straight, but strains are still limited by a straight fracture line in the principal strain space. The multi...

Martian outflow channels: How did their source aquifers form, and why did they drain so rapidly?

Science.gov (United States)

Rodriguez, J Alexis P; Kargel, Jeffrey S; Baker, Victor R; Gulick, Virginia C; Berman, Daniel C; Fairén, Alberto G; Linares, Rogelio; Zarroca, Mario; Yan, Jianguo; Miyamoto, Hideaki; Glines, Natalie

2015-09-08

Catastrophic floods generated ~3.2 Ga by rapid groundwater evacuation scoured the Solar System's most voluminous channels, the southern circum-Chryse outflow channels. Based on Viking Orbiter data analysis, it was hypothesized that these outflows emanated from a global Hesperian cryosphere-confined aquifer that was infused by south polar meltwater infiltration into the planet's upper crust. In this model, the outflow channels formed along zones of superlithostatic pressure generated by pronounced elevation differences around the Highland-Lowland Dichotomy Boundary. However, the restricted geographic location of the channels indicates that these conditions were not uniform. Furthermore, some outflow channel sources are too high to have been fed by south polar basal melting. Using more recent mission data, we argue that during the Late Noachian fluvial and glacial sediments were deposited into a clastic wedge within a paleo-basin located in the southern circum-Chryse region, which at the time was completely submerged under a primordial northern plains ocean [corrected]. Subsequent Late Hesperian outflow channels were sourced from within these geologic materials and formed by gigantic groundwater outbursts driven by an elevated hydraulic head from the Valles Marineris region. Thus, our findings link the formation of the southern circum-Chryse outflow channels to ancient marine, glacial, and fluvial erosion and sedimentation.

Seeking sunlight: rapid phototactic motility of filamentous mat-forming cyanobacteria optimize photosynthesis and enhance carbon burial in Lake Huron's submerged sinkholes.

Science.gov (United States)

Biddanda, Bopaiah A; McMillan, Adam C; Long, Stephen A; Snider, Michael J; Weinke, Anthony D

2015-01-01

We studied the motility of filamentous mat-forming cyanobacteria consisting primarily of Oscillatoria-like cells growing under low-light, low-oxygen, and high-sulfur conditions in Lake Huron's submerged sinkholes using in situ observations, in vitro measurements and time-lapse microscopy. Gliding movement of the cyanobacterial trichomes (100-10,000 μm long filaments, composed of cells ∼10 μm wide and ∼3 μm tall) revealed individual as well as group-coordinated motility. When placed in a petri dish and dispersed in ground water from the sinkhole, filaments re-aggregated into defined colonies within minutes, then dispersed again. Speed of individual filaments increased with temperature from ∼50 μm min(-1) or ∼15 body lengths min(-1) at 10°C to ∼215 μm min(-1) or ∼70 body lengths min(-1) at 35°C - rates that are rapid relative to non-flagellated/ciliated microbes. Filaments exhibited precise and coordinated positive phototaxis toward pinpoints of light and congregated under the light of foil cutouts. Such light-responsive clusters showed an increase in photosynthetic yield - suggesting phototactic motility aids in light acquisition as well as photosynthesis. Once light source was removed, filaments slowly spread out evenly and re-aggregated, demonstrating coordinated movement through inter-filament communication regardless of light. Pebbles and pieces of broken shells placed upon intact mat were quickly covered by vertically motile filaments within hours and became fully buried in the anoxic sediments over 3-4 diurnal cycles - likely facilitating the preservation of falling debris. Coordinated horizontal and vertical filament motility optimize mat cohesion and dynamics, photosynthetic efficiency and sedimentary carbon burial in modern-day sinkhole habitats that resemble the shallow seas in Earth's early history. Analogous cyanobacterial motility may have played a key role in the oxygenation of the planet by optimizing photosynthesis while favoring

Growing Right Onto Wellness (GROW): a family-centered, community-based obesity prevention randomized controlled trial for preschool child-parent pairs.

Science.gov (United States)

Po'e, Eli K; Heerman, William J; Mistry, Rishi S; Barkin, Shari L

2013-11-01

Growing Right Onto Wellness (GROW) is a randomized controlled trial that tests the efficacy of a family-centered, community-based, behavioral intervention to prevent childhood obesity among preschool-aged children. Focusing on parent-child pairs, GROW utilizes a multi-level framework, which accounts for macro (i.e., built-environment) and micro (i.e., genetics) level systems that contribute to the childhood obesity epidemic. Six hundred parent-child pairs will be randomized to a 3-year healthy lifestyle intervention or a 3-year school readiness program. Eligible children are enrolled between ages 3 and 5, are from minority communities, and are not obese. The principal site for the GROW intervention is local community recreation centers and libraries. The primary outcome is childhood body mass index (BMI) trajectory at the end of the three-year study period. In addition to other anthropometric measurements, mediators and moderators of growth are considered, including genetics, accelerometry, and diet recall. GROW is a staged intensity intervention, consisting of intensive, maintenance, and sustainability phases. Throughout the study, parents build skills in nutrition, physical activity, and parenting, concurrently forming new social networks. Participants are taught goal-setting, self-monitoring, and problem solving techniques to facilitate sustainable behavior change. The GROW curriculum uses low health literacy communication and social media to communicate key health messages. The control arm is administered to both control and intervention participants. By conducting this trial in public community centers, and by implementing a family-centered approach to sustainable healthy childhood growth, we aim to develop an exportable community-based intervention to address the expanding public health crisis of pediatric obesity. © 2013.

Proceedings of the Canadian Institute's 4. annual oil sands supply and infrastructure conference : maximizing opportunity and mitigating risks in a rapidly growing market

International Nuclear Information System (INIS)

2006-01-01

This conference addressed the challenges facing oil sands development, with particular reference to supply and infrastructure issues. Updates on oil sands markets and opportunities were presented along with strategies for mitigating risks in a rapidly growing market. The best practices for supplying a demanding market through supply shortages and high prices were identified along with policies that should be implemented to help overcome labour shortages. Some presentations expressed how commodities pricing and trends can impact business. Others showed how markets in China and the United States are prepared for oilsands products. The views of other international companies on oil sands was also discussed along with proposed plans to eliminate the infrastructure congestion and risks caused by expanding oil sands development. The challenges and benefits of investing in Alberta's oil sands were reviewed along with strategies to enhance upgrading and refining capacity in the province. Economic drivers and the creation of new markets were examined, and various export opportunities were reviewed along with industry management challenges concerning human resources, labour supply, training and education. The conference featured 10 presentations, of which 3 have been catalogued separately for inclusion in this database. refs., tabs., figs

Spatially Resolved Hα Maps and Sizes of 57 Strongly Star-forming Galaxies at z ~ 1 from 3D-HST: Evidence for Rapid Inside-out Assembly of Disk Galaxies

Science.gov (United States)

Nelson, Erica June; van Dokkum, Pieter G.; Brammer, Gabriel; Förster Schreiber, Natascha; Franx, Marijn; Fumagalli, Mattia; Patel, Shannon; Rix, Hans-Walter; Skelton, Rosalind E.; Bezanson, Rachel; Da Cunha, Elisabete; Kriek, Mariska; Labbe, Ivo; Lundgren, Britt; Quadri, Ryan; Schmidt, Kasper B.

2012-03-01

We investigate the buildup of galaxies at z ~ 1 using maps of Hα and stellar continuum emission for a sample of 57 galaxies with rest-frame Hα equivalent widths >100 Å in the 3D-HST grism survey. We find that the Hα emission broadly follows the rest-frame R-band light but that it is typically somewhat more extended and clumpy. We quantify the spatial distribution with the half-light radius. The median Hα effective radius re (Hα) is 4.2 ± 0.1 kpc but the sizes span a large range, from compact objects with re (Hα) ~ 1.0 kpc to extended disks with re (Hα) ~ 15 kpc. Comparing Hα sizes to continuum sizes, we find =1.3 ± 0.1 for the full sample. That is, star formation, as traced by Hα, typically occurs out to larger radii than the rest-frame R-band stellar continuum; galaxies are growing their radii and building up from the inside out. This effect appears to be somewhat more pronounced for the largest galaxies. Using the measured Hα sizes, we derive star formation rate surface densities, ΣSFR. We find that ΣSFR ranges from ~0.05 M ⊙ yr-1 kpc-2 for the largest galaxies to ~5 M ⊙ yr-1 kpc-2 for the smallest galaxies, implying a large range in physical conditions in rapidly star-forming z ~ 1 galaxies. Finally, we infer that all galaxies in the sample have very high gas mass fractions and stellar mass doubling times <500 Myr. Although other explanations are also possible, a straightforward interpretation is that we are simultaneously witnessing the rapid formation of compact bulges and large disks at z ~ 1.

Mycobacterium stephanolepidis sp. nov., a rapidly growing species related to Mycobacterium chelonae, isolated from marine teleost fish, Stephanolepis cirrhifer.

Science.gov (United States)

Fukano, Hanako; Wada, Shinpei; Kurata, Osamu; Katayama, Kinya; Fujiwara, Nagatoshi; Hoshino, Yoshihiko

2017-08-01

A previously undescribed rapidly growing, non-pigmented mycobacterium was identified based on biochemical and nucleic acid analyses, as well as growth characteristics. Seven isolates were cultured from samples collected from five thread-sail filefish (Stephanolepis cirrhifer) and two farmed black scraper (Thamnaconus modestus). Bacterial growth occurred at 15-35 °C on Middlebrook 7H11 agar. The bacteria were positive for catalase activity at 68 °C and urease activity, intermediate for iron uptake, and negative for Tween 80 hydrolysis, nitrate reduction, semi-quantitative catalase activity and arylsulfatase activity at day 3. No growth was observed on Middlebrook 7H11 agar supplemented with picric acid, and very little growth was observed in the presence of 5 % NaCl. α- and α'-mycolates were identified in the cell walls, and a unique profile of the fatty acid methyl esters and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) profiles of the protein and cell-wall lipids were acquired. Sequence analysis revealed that the seven isolates shared identical sequences for the 16S rRNA, rpoB, hsp65, recA and sodA genes. Phylogenetic analysis of the five gene sequences confirmed that the isolates were unique, but closely related to Mycobacterium chelonae. Antibiotic susceptibility testing revealed the minimum inhibitory concentration (MIC) of clarithromycin against this novel species was Mycobacterium salmoniphilum. The hsp65 PCR restriction enzyme analysis pattern differed from those of M. chelonae and M. salmoniphilum. Based on these findings, the name Mycobacterium stephanolepidis sp. nov. is proposed for this novel species, with the type strain being NJB0901 T (=JCM 31611 T =KCTC 39843 T ).

The economic case for low-carbon development in rapidly growing developing world cities: A case study of Palembang, Indonesia

International Nuclear Information System (INIS)

Colenbrander, Sarah; Gouldson, Andy; Sudmant, Andrew Heshedahl; Papargyropoulou, Effie

2015-01-01

Where costs or risks are higher, evidence is lacking or supporting institutions are less developed, policymakers can struggle to make the case for low-carbon investment. This is especially the case in developing world cities where decision-makers struggle to keep up with the pace and scale of change. Focusing on Palembang in Indonesia, this paper considers the economic case for proactive investment in low-carbon development. We find that a rapidly growing industrial city in a developing country can reduce emissions by 24.1% in 2025, relative to business as usual levels, with investments of USD405.6 million that would reduce energy expenditure in the city by USD436.8 million. Emissions from the regional grid could be reduced by 12.2% in 2025, relative to business as usual trends, with investments of USD2.9 billion that would generate annual savings of USD175 million. These estimates understate the savings from reduced expenditure on energy subsidies and energy infrastructure. The compelling economic case for mainstreaming climate mitigation in this developing country city suggests that the constraints on climate action can be political and institutional rather than economic. There is therefore a need for more effective energy governance to drive the transition to a low-carbon economy. - Highlights: • We evaluate the economic case for low carbon investment in a developing world city. • Cost-effective measures could reduce emissions by 24.1% relative to BAU levels. • These pay for themselves in <1 year and generate savings throughout their lifetime. • Further savings come from reduced expenditure on energy infrastructure, subsidies. • Limitations on climate action seem to be political/institutional – not economic

In vivo neuronal synthesis and axonal transport of Kunitz protease inhibitor (KPI)-containing forms of the amyloid precursor protein.

Science.gov (United States)

Moya, K L; Confaloni, A M; Allinquant, B

1994-11-01

We have shown previously that the amyloid precursor protein (APP) is synthesized in retinal ganglion cells and is rapidly transported down the axons, and that different molecular weight forms of the precursor have different developmental time courses. Some APP isoforms contain a Kunitz protease inhibitor (KPI) domain, and APP that lacks the KPI domain is considered the predominant isoform in neurons. We now show that, among the various rapidly transported APPs, a 140-kDa isoform contains the KPI domain. This APP isoform is highly expressed in rapidly growing retinal axons, and it is also prominent in adult axon endings. This 140-kDa KPI-containing APP is highly sulfated compared with other axonally transported isoforms. These results show that APP with the KPI domain is a prominent isoform synthesized in neurons in vivo, and they suggest that the regulation of protease activity may be an important factor during the establishment of neuronal connections.

Regional Advection Perturbations in an Irrigated Desert (RAPID) Experiment

NARCIS (Netherlands)

Debruin, H.A.R.; Hartogensis, O.K.; Allen, R.G.; Kramer, J.W.J.L.

2005-01-01

The RAPID field experiment took place in August - September 1999 at a site 25km south of Twin Falls, Idaho, USA. The experiment concerned micrometeorological observations over extensive, well-irrigated fields covered with the fast-growing crop alfalfa. During daytime, on a number of days the

A big data management platform for rapidly changing environments

NARCIS (Netherlands)

Zahedi, P.

2014-01-01

Big data is now a reality. Storing, managing, and analyzing very large amount of data is a common challenge in the world of technology where digital content is rapidly growing. In recent years, FEI advanced electron microscopes, with their unsurpassed magnification and resolving power brought an

Nanomaterial-enabled Rapid Detection of Water Contaminants.

Science.gov (United States)

Mao, Shun; Chang, Jingbo; Zhou, Guihua; Chen, Junhong

2015-10-28

Water contaminants, e.g., inorganic chemicals and microorganisms, are critical metrics for water quality monitoring and have significant impacts on human health and plants/organisms living in water. The scope and focus of this review is nanomaterial-based optical, electronic, and electrochemical sensors for rapid detection of water contaminants, e.g., heavy metals, anions, and bacteria. These contaminants are commonly found in different water systems. The importance of water quality monitoring and control demands significant advancement in the detection of contaminants in water because current sensing technologies for water contaminants have limitations. The advantages of nanomaterial-based sensing technologies are highlighted and recent progress on nanomaterial-based sensors for rapid water contaminant detection is discussed. An outlook for future research into this rapidly growing field is also provided. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

New organizational forms, controls, and institutions

NARCIS (Netherlands)

Annosi, Maria Carmela; Brunetta, Federica

2017-01-01

This book highlights the growing number of 'post-bureaucratic' firms that are abandoning hierarchical organizational forms in favor of self-managing teams. Addressing the need to outperform, these new organization types foresee the benefits of an organic structure with new and more indirect forms of

Growing Economic Inequality and Its (Partially Political Roots

Directory of Open Access Journals (Sweden)

Kay Lehman Schlozman

2017-05-01

Full Text Available Growing economic inequality fosters inequality in the political processes of American democracy. Since the 1970’s inequalities in earnings and wealth have increased dramatically in the United States creating a higher level of inequality in disposable income than in other developed democracies. The United States also lags behind other rich nations in the way it provides for those at the bottom of the income distribution, and there is no evidence that the opportunities for success promised by the American Dream compensate for inequality in America. Technological and economic developments are significant causes of this growing economic inequality. The role of politics is more controversial, but government policy influences the distribution of income and education by the way it determines government benefits, taxes and the way markets function. For a number of reasons—including, most importantly, the relationship between education and income and the ability of the affluent to make large campaign donations—those who are economically well-off speak more loudly in politics. They are more likely to engage in most forms of individual political participation—not only ones that involve using cash but also ones that cost nothing except time. Moreover, when it comes to political voice through organizations, a professionalized domain dominated by hired experts in which the volume of political voice can be altered to reflect available economic resources, affluent interests are more likely to be organized and active. This essay considers the growing economic inequalities that form an important part of the backdrop for unequal political voice.

Growing media [Chapter 5

Science.gov (United States)

Douglass F. Jacobs; Thomas D. Landis; Tara Luna

2009-01-01

Selecting the proper growing medium is one of the most important considerations in nursery plant production. A growing medium can be defined as a substance through which roots grow and extract water and nutrients. In native plant nurseries, a growing medium can consist of native soil but is more commonly an "artificial soil" composed of materials such as peat...

Nucleoli from growing oocytes support the development of enucleolated full-grown oocytes in the pig.

Science.gov (United States)

Kyogoku, Hirohisa; Ogushi, Sugako; Miyano, Takashi

2010-02-01

Recent research has shown that the maternal nucleolus is essential for embryonic development. The morphology of the nucleolus in growing oocytes differs from that in full-grown oocytes. We determined the ability of nucleoli from growing oocytes to substitute for nucleoli of full-grown oocytes in terms of supporting embryonic development in this study. Growing (around 100 microm in diameter) and full-grown porcine oocytes (120 microm) were collected from small (0.6-1.0 mm) and large antral follicles (4-5 mm), respectively. The nucleolus was aspirated from full-grown oocytes by micromanipulation, and the resulting enucleolated oocytes were matured to metaphase II; the nucleoli originating from full-grown and growing oocytes were then injected into the oocytes. The Chromatin of growing oocytes was aspirated with the nucleolus during the enucleolation process. Growing oocytes were thus treated with actinomycin D to release the chromatin from their nucleoli, and the nucleoli were collected and transferred to the enucleolated and matured full-grown oocytes. After activation by electro-stimulation, nucleoli were formed in pronuclei of sham-operated oocytes. Enucleolated oocytes that had been injected with nucleoli from either full-grown or growing, however, did not form any nucleoli in the pronuclei. No enucleolated oocytes developed to blastocysts, whereas enucleolated oocytes injected with nucleoli from full-grown oocytes (15%) or growing oocytes (18%) developed to blastocysts. These results indicate that the nucleoli from growing oocytes can substitute for nucleoli from full-grown oocytes during early embryonic development. (c) 2009 Wiley-Liss, Inc.

Seeking sunlight: rapid phototactic motility of filamentous mat-forming cyanobacteria optimize photosynthesis and enhance carbon burial in Lake Huron’s submerged sinkholes

Directory of Open Access Journals (Sweden)

Bopaiah A Biddanda

2015-09-01

Full Text Available We studied the motility of filamentous mat-forming cyanobacteria consisting primarily of Oscillatoria-like cells growing under low-light, low-oxygen and high-sulfur conditions in Lake Huron’s submerged sinkholes using in situ observations, in vitro measurements and time-lapse microscopy. Gliding movement of the cyanobacterial trichomes (100-10,000 µm long filaments, composed of cells ~10 µm wide and ~3 µm tall revealed individual as well as group-coordinated motility. When placed in a petri dish and dispersed in ground water from the sinkhole, filaments re-aggregated into defined colonies within minutes, then dispersed again. Speed of individual filaments increased with temperature from ~50 µm minute-1 or ~15 body lengths minute-1 at 10°C to ~215 µm minute-1 or ~70 body lengths minute-1 at 35°C – rates that are rapid relative to non-flagellated/ciliated microbes. Filaments exhibited precise and coordinated positive phototaxis towards pinpoints of light and congregated under the light of foil cutouts. Such light-responsive clusters showed an increase in photosynthetic yield – suggesting phototactic motility aids in light acquisition as well as photosynthesis. Once light source was removed, filaments slowly spread out evenly and re-aggregated, demonstrating coordinated movement through inter-filament communication regardless of light. Pebbles and pieces of broken shells placed upon intact mat were quickly covered by vertically motile filaments within hours and became fully buried in the anoxic sediments over 3-4 diurnal cycles – likely facilitating the preservation of falling debris. Coordinated horizontal and vertical filament motility optimize mat cohesion and dynamics, photosynthetic efficiency and sedimentary carbon burial in modern-day sinkhole habitats that resemble the shallow seas in Earth’s early history. Analogous cyanobacterial motility may have played a key role in the oxygenation of the planet by optimizing

SPATIALLY RESOLVED Hα MAPS AND SIZES OF 57 STRONGLY STAR-FORMING GALAXIES AT z ∼ 1 FROM 3D-HST: EVIDENCE FOR RAPID INSIDE-OUT ASSEMBLY OF DISK GALAXIES

International Nuclear Information System (INIS)

Nelson, Erica June; Van Dokkum, Pieter G.; Skelton, Rosalind E.; Bezanson, Rachel; Lundgren, Britt; Brammer, Gabriel; Förster Schreiber, Natascha; Franx, Marijn; Fumagalli, Mattia; Patel, Shannon; Labbe, Ivo; Rix, Hans-Walter; Da Cunha, Elisabete; Schmidt, Kasper B.; Kriek, Mariska; Quadri, Ryan

2012-01-01

We investigate the buildup of galaxies at z ∼ 1 using maps of Hα and stellar continuum emission for a sample of 57 galaxies with rest-frame Hα equivalent widths >100 Å in the 3D-HST grism survey. We find that the Hα emission broadly follows the rest-frame R-band light but that it is typically somewhat more extended and clumpy. We quantify the spatial distribution with the half-light radius. The median Hα effective radius r e (Hα) is 4.2 ± 0.1 kpc but the sizes span a large range, from compact objects with r e (Hα) ∼ 1.0 kpc to extended disks with r e (Hα) ∼ 15 kpc. Comparing Hα sizes to continuum sizes, we find e (Hα)/r e (R) > =1.3 ± 0.1 for the full sample. That is, star formation, as traced by Hα, typically occurs out to larger radii than the rest-frame R-band stellar continuum; galaxies are growing their radii and building up from the inside out. This effect appears to be somewhat more pronounced for the largest galaxies. Using the measured Hα sizes, we derive star formation rate surface densities, Σ SFR . We find that Σ SFR ranges from ∼0.05 M ☉ yr –1 kpc –2 for the largest galaxies to ∼5 M ☉ yr –1 kpc –2 for the smallest galaxies, implying a large range in physical conditions in rapidly star-forming z ∼ 1 galaxies. Finally, we infer that all galaxies in the sample have very high gas mass fractions and stellar mass doubling times <500 Myr. Although other explanations are also possible, a straightforward interpretation is that we are simultaneously witnessing the rapid formation of compact bulges and large disks at z ∼ 1.

Problems of growing forests in estrangement and population relocation areas

International Nuclear Information System (INIS)

Khudolij, V.N.; Podkur, P.N.; Davydov, N.N.; Mikhalkov, V.I.

1992-01-01

It has been concluded that the process of growth and normal development of single-stratum pine tress at the age from 20 to 40 depends on their density. Under conditions of thick forest interspecific competition and fight for space sharpen. Within the estrangement area unfavorable trends in growth and evolution have been disclosed at the age above 30. Growing of pines without care results in suppression of growth; some morphological changes in the trunk form have been observed. Such an uncontrolled mode of growing can lead to physiological weakening of the tress. 8 refs.; 4 tabs

Rapid prototyping of an adaptive light-source for mobile manipulators with EasyKit and EasyLab

Science.gov (United States)

Wojtczyk, Martin; Barner, Simon; Geisinger, Michael; Knoll, Alois

2008-08-01

While still not common in day-to-day business, mobile robot platforms form a growing market in robotics. Mobile platforms equipped with a manipulator for increased flexibility have been used successfully in biotech laboratories for sample management as shown on the well-known ESACT meetings. Navigation and object recognition is carried out by the utilization of a mounted machine vision camera. To cope with the different illumination conditions in a large laboratory, development of an adaptive light source was indispensable. We present our approach of rapid developing a computer controlled, adaptive LED light within one single business day, by utilizing the hardware toolbox EasyKit and our appropriate software counterpart EasyLab.

Development and Validation of a Stability-Indicating RP-HPLC Method for Rapid Determination of Doxycycline in Pharmaceutical Bulk and Dosage Forms

OpenAIRE

Shabnam Pourmoslemi, Soroush Mirfakhraee, Saeid Yaripour, Ali Mohammadi

2016-01-01

Background: A rapid stability-indicating RP-HPLC method for analysis of doxycycline in the presence of its degradation products was developed and validated. Methods: Forced degradation studies were carried out on bulk samples and capsule dosage forms of doxycycline using acid, base, H2O2, heat, and UV light as described by ICH for stress conditions to demonstrate the stability-indicating power of the method. Separations were performed on a Perfectsil® Target ODS column (3-5µm, 125 mm×4 mm), u...

The end of surplus and a growing role in world markets

International Nuclear Information System (INIS)

Eklof, W.D.

1991-01-01

Rapid economic growth in Asia in recent years has rekindled the region's appetite for energy. This surge in energy consumption since the oil price collapse in 1986 has brought into sharp focus critical challenges facing Asian governments and commercial organizations in the 1990's--challenges that must be met if the economic success of recent years is to continue. Yet supplying energy to fuel economic growth will be more difficult than in the past. Oil reserves in the region are inadequate to support the anticipated growth in demands, and new discoveries may be modest. Gas reserves are plentiful, but not well located to meet the energy needs of major markets. Added to difficulties associated with these resource-based limitations new challenges are emerging: growing consumer demands for transportation fuels and electricity, a growing concern for the environmental impact of energy production and consumption, and the need to rethink long-standing energy policies that were based on expectations of very high future oil prices. These new factors will complicate policy decisions and place new constraints on available energy options. This paper addresses the future development of Asian oil and gas markets in light of these challenges, and provides an assessment of the potential growth of gas markets, the need for growing oil imports into the region, and the need for new refining capacity to meet the growing demand for transportation fuels

Mycobacterium saopaulense sp. nov., a rapidly growing mycobacterium closely related to members of the Mycobacterium chelonae--Mycobacterium abscessus group.

Science.gov (United States)

Nogueira, Christiane Lourenço; Whipps, Christopher M; Matsumoto, Cristianne Kayoko; Chimara, Erica; Droz, Sara; Tortoli, Enrico; de Freitas, Denise; Cnockaert, Margo; Palomino, Juan Carlos; Martin, Anandi; Vandamme, Peter; Leão, Sylvia Cardoso

2015-12-01

Five isolates of non-pigmented, rapidly growing mycobacteria were isolated from three patients and,in an earlier study, from zebrafish. Phenotypic and molecular tests confirmed that these isolates belong to the Mycobacterium chelonae-Mycobacterium abscessus group, but they could not be confidently assigned to any known species of this group. Phenotypic analysis and biochemical tests were not helpful for distinguishing these isolates from other members of the M. chelonae–M.abscessus group. The isolates presented higher drug resistance in comparison with other members of the group, showing susceptibility only to clarithromycin. The five isolates showed a unique PCR restriction analysis pattern of the hsp65 gene, 100 % similarity in 16S rRNA gene and hsp65 sequences and 1-2 nt differences in rpoB and internal transcribed spacer (ITS) sequences.Phylogenetic analysis of a concatenated dataset including 16S rRNA gene, hsp65, and rpoB sequences from type strains of more closely related species placed the five isolates together, as a distinct lineage from previously described species, suggesting a sister relationship to a group consisting of M. chelonae, Mycobacterium salmoniphilum, Mycobacterium franklinii and Mycobacterium immunogenum. DNA–DNA hybridization values .70 % confirmed that the five isolates belong to the same species, while values ,70 % between one of the isolates and the type strains of M. chelonae and M. abscessus confirmed that the isolates belong to a distinct species. The polyphasic characterization of these isolates, supported by DNA–DNA hybridization results,demonstrated that they share characteristics with M. chelonae–M. abscessus members, butconstitute a different species, for which the name Mycobacterium saopaulense sp. nov. is proposed. The type strain is EPM10906T (5CCUG 66554T5LMG 28586T5INCQS 0733T).

The changing form of Antarctic biodiversity

OpenAIRE

Chown, Steven L.; Clarke, Andrew; Fraser, Ceridwen I.; Cary, S. Craig; Moon, Katherine L.; McGeoch, Melodie A.

2015-01-01

Antarctic biodiversity is much more extensive, ecologically diverse and biogeographically structured than previously thought. Understanding of how this diversity is distributed in marine and terrestrial systems, the mechanisms underlying its spatial variation, and the significance of the microbiota is growing rapidly. Broadly recognizable drivers of diversity variation include energy availability and historical refugia. The impacts of local human activities and global environmental change non...

A travel clinic in your office: grow your practice and protect international travelers.

Science.gov (United States)

Kirsch, Michael

2009-01-01

Medical practices today face economic challenges from declining reimbursements and rising overhead costs. Physicians need to develop new income sources to invigorate their practices and remain viable. Travel medicine-advising and immunizing international travelers-is a rapidly growing specialty in the United States that generates substantial cash reimbursements and professional satisfaction. Travel Clinics of America, a physician-operated company, specializes in helping physicians to incorporate travel medicine into their existing practices.

Fruit-Growing in Latvia – Industry and Science

Directory of Open Access Journals (Sweden)

Kaufmane Edīte

2017-06-01

Full Text Available In all times, fruit trees for family use have been grown at Latvian farms. Yet these fruits obtained market value only after the land ownership reform in 19th century. This facilitated rapid area increase of different fruit crops, allowing supply with fruits not only the local market, but also for export to the largest cities of Russia. Especially fast development of fruit-growing was observed during the first independent republic (1919–1940. The demand for planting material increased, and plants were imported from Western Europe. Choice of unsuitable cultivars and rootstocks was the main reason of the massive orchard area loss during the following severe winters. After the Second World War, the Soviet powers supported only the establishment of large orchards for processing needs, 200-300 ha, which were unsuitable for the Latvian climate and terrain. At the same time, numbers of allotment gardens rapidly increased and part of their produce was sold also on the market. After regaining of independence and private property, interest in fresh fruit and berry production for market, as well as processing, renewed. It was hindered by lack of continuity in experience and knowledge. Diversity of terrain, soils and climate all demand considerate choice of suitable orchard location and cultivars. Direct use of foreign experience often led to failure. At present, development of the fruit industry is most of all hindered by lack of qualified specialists of different levels, which does not allow to establish an appropriate consulting system. Cooperation of growers for easier marketing also is developing too slowly. Insufficient economic and market research does not allow to balance the demand with increase of plantation area, especially for large-scale processing and export, so strategic guidance of the fruit industry is not possible. Development of fruit-growing is hindered also by a lack of continuous long-term support to horticultural science. As a

Three-Dimensional Evaluation of the Upper Airway Morphological Changes in Growing Patients with Skeletal Class III Malocclusion Treated by Protraction Headgear and Rapid Palatal Expansion: A Comparative Research.

Directory of Open Access Journals (Sweden)

Xueling Chen

Full Text Available The aim of this study was to evaluate the morphological changes of upper airway after protraction headgear and rapid maxillary expansion (PE treatment in growing patients with Class III malocclusion and maxillary skeletal deficiency compared with untreated Class III patients by cone-beam computed tomography (CBCT.Thirty growing patients who have completed PE therapy were included in PE group. The control group (n = 30 was selected from the growing untreated patients with the same diagnosis. The CBCT scans of the pre-treatment (T1 and post-treatment (T2 of PE group and the control group were collected. Reconstruction and registration of the 3D models of T1 and T2 were completed. By comparing the data obtained from T1, T2 and control group, the morphological changes of the upper airway during the PE treatment were evaluated.Comparing with the data from T1 group, the subspinale (A of maxilla and the upper incisor (UI of the T2 group were moved in the anterior direction. The gnathion (Gn of mandible was moved in the posterior-inferior direction. The displacement of the hyoid bone as well as the length and width of dental arch showed significant difference. The volume and mean cross-sectional area of nasopharynx, velopharynx and glossopharynx region showed significant difference. The largest anteroposterior/the largest lateral (AP/LR ratios of the velopharynx and glossopharynx were increased, but the AP/LR ratio of the hypopharynx was decreased. In addition, the length and width of the maxillary dental arch, the displacement of the hyoid bone, the volume of nasopharynx and velopharynx, and the AP/LR ratio of the hypopharynx and velopharynx showed significant difference between the data from control and T2 group.The PE treatment of Class III malocclusion with maxillary skeletal hypoplasia leads to a significant increase in the volume of nasopharynx and velopharynx.

Reduced trace element concentrations in fast-growing juvenile Atlantic salmon in natural streams.

Science.gov (United States)

Ward, Darren M; Nislow, Keith H; Chen, Celia Y; Folt, Carol L

2010-05-01

To assess the effect of rapid individual growth on trace element concentrations in fish, we measured concentrations of seven trace elements (As, Cd, Cs, Hg, Pb, Se, Zn) in stream-dwelling Atlantic salmon (Salmo salar) from 15 sites encompassing a 10-fold range in salmon growth. All salmon were hatched under uniform conditions, released into streams, and sampled approximately 120 days later for trace element analysis. For most elements, element concentrations in salmon tracked those in their prey. Fast-growing salmon had lower concentrations of all elements than slow growers, after accounting for prey concentrations. This pattern held for essential and nonessential elements, as well as elements that accumulate from food and those that can accumulate from water. At the sites with the fastest salmon growth, trace element concentrations in salmon were 37% (Cs) to 86% (Pb) lower than at sites where growth was suppressed. Given that concentrations were generally below levels harmful to salmon and that the pattern was consistent across all elements, we suggest that dilution of elements in larger biomass led to lower concentrations in fast-growing fish. Streams that foster rapid, efficient fish growth may produce fish with lower concentrations of elements potentially toxic for human and wildlife consumers.

Growing the Blockchain information infrastructure

DEFF Research Database (Denmark)

Jabbar, Karim; Bjørn, Pernille

2017-01-01

In this paper, we present ethnographic data that unpacks the everyday work of some of the many infrastructuring agents who contribute to creating, sustaining and growing the Blockchain information infrastructure. We argue that this infrastructuring work takes the form of entrepreneurial actions......, which are self-initiated and primarily directed at sustaining or increasing the initiator’s stake in the emerging information infrastructure. These entrepreneurial actions wrestle against the affordances of the installed base of the Blockchain infrastructure, and take the shape of engaging...... or circumventing activities. These activities purposefully aim at either influencing or working around the enablers and constraints afforded by the Blockchain information infrastructure, as its installed base is gaining inertia. This study contributes to our understanding of the purpose of infrastructuring, seen...

XF-70 and XF-73, novel antibacterial agents active against slow-growing and non-dividing cultures of Staphylococcus aureus including biofilms.

Science.gov (United States)

Ooi, Nicola; Miller, Keith; Randall, Christopher; Rhys-Williams, William; Love, William; Chopra, Ian

2010-01-01

Slow-growing and non-dividing bacteria exhibit tolerance to many antibiotics. However, membrane-active agents may act against bacteria in all growth phases. We sought to examine whether the novel porphyrin antibacterial agents XF-70 and XF-73, which have rapid membrane-perturbing activity against Staphylococcus aureus, retained antistaphylococcal activity against growth-attenuated cells. The killing kinetics of XF-70, XF-73 and various comparator agents against exponential phase cultures of S. aureus SH1000 were compared with effects on cells held at 4 degrees C, non-growing cultures expressing the stringent response induced by mupirocin and bacteria in the stationary phase. Biofilms of S. aureus SH1000 were generated with the Calgary device to examine the activities of XF-70 and XF-73 under a further system exhibiting diminished bacterial growth. Cold culture, stringent response and stationary phase cultures remained susceptible to XF-70 and XF-73, which caused > or =5 log reductions in viability over 2 h. During this period the most active comparator agents (chlorhexidine and cetyltrimethylammonium bromide) only promoted a 3 log drop in viability. XF-70 and XF-73 were also highly active against biofilms, with both agents exhibiting low biofilm MICs (1 mg/L) and minimum biofilm eradication concentrations (2 mg/L). XF-70 and XF-73 remained highly active against various forms of slow-growing or non-dividing S. aureus. The results support the hypothesis that membrane-active agents may be particularly effective in eradicating slow- or non-growing bacteria and suggest that XF-70 and XF-73 could be utilized to treat staphylococcal infections where the organisms are only dividing slowly, such as biofilm-associated infections of prosthetic devices.

Reverse engineering--rapid prototyping of the skull in forensic trauma analysis.

Science.gov (United States)

Kettner, Mattias; Schmidt, Peter; Potente, Stefan; Ramsthaler, Frank; Schrodt, Michael

2011-07-01

Rapid prototyping (RP) comprises a variety of automated manufacturing techniques such as selective laser sintering (SLS), stereolithography, and three-dimensional printing (3DP), which use virtual 3D data sets to fabricate solid forms in a layer-by-layer technique. Despite a growing demand for (virtual) reconstruction models in daily forensic casework, maceration of the skull is frequently assigned to ensure haptic evidence presentation in the courtroom. Owing to the progress in the field of forensic radiology, 3D data sets of relevant cases are usually available to the forensic expert. Here, we present a first application of RP in forensic medicine using computed tomography scans for the fabrication of an SLS skull model in a case of fatal hammer impacts to the head. The report is intended to show that this method fully respects the dignity of the deceased and is consistent with medical ethics but nevertheless provides an excellent 3D impression of anatomical structures and injuries. © 2011 American Academy of Forensic Sciences.

Rapid shear alignment of sub-10 nm cylinder-forming block copolymer films based on thermal expansion mismatch

Science.gov (United States)

Nicaise, Samuel M.; Gadelrab, Karim R.; G, Amir Tavakkoli K.; Ross, Caroline A.; Alexander-Katz, Alfredo; Berggren, Karl K.

2018-01-01

Directed self-assembly of block copolymers (BCPs) provided by shear-stress can produce aligned sub-10 nm structures over large areas for applications in integrated circuits, next-generation data storage, and plasmonic structures. In this work, we present a fast, versatile BCP shear-alignment process based on coefficient of thermal expansion mismatch of the BCP film, a rigid top coat and a substrate. Monolayer and bilayer cylindrical microdomains of poly(styrene-b-dimethylsiloxane) aligned preferentially in-plane and orthogonal to naturally-forming or engineered cracks in the top coat film, allowing for orientation control over 1 cm2 substrates. Annealing temperatures, up to 275 °C, provided low-defect alignment up to 2 mm away from cracks for rapid (<1 min) annealing times. Finite-element simulations of the stress as a function of annealing time, annealing temperature, and distance from cracks showed that shear stress during the cooling phase of the thermal annealing was critical for the observed microdomain alignment.

Clinical utility of RapidArc™ radiotherapy technology

International Nuclear Information System (INIS)

Infusino, Erminia

2015-01-01

RapidArc™ is a radiation technique that delivers highly conformal dose distributions through the complete rotation (360°) and speed variation of the linear accelerator gantry. This technique, called volumetric modulated arc therapy (VMAT), compared with conventional radiotherapy techniques, can achieve high-target volume coverage and sparing damage to normal tissues. RapidArc delivers precise dose distribution and conformity similar to or greater than intensity-modulated radiation therapy in a short time, generally a few minutes, to which image-guided radiation therapy is added. RapidArc has become a currently used technology in many centers, which use RapidArc technology to treat a large number of patients. Large and small hospitals use it to treat the most challenging cases, but more and more frequently for the most common cancers. The clinical use of RapidArc and VMAT technology is constantly growing. At present, a limited number of clinical data are published, mostly concerning planning and feasibility studies. Clinical outcome data are increasing for a few tumor sites, even if only a little. The purpose of this work is to discuss the current status of VMAT techniques in clinical use through a review of the published data of planning systems and clinical outcomes in several tumor sites. The study consisted of a systematic review based on analysis of manuscripts retrieved from the PubMed, BioMed Central, and Scopus databases by searching for the keywords “RapidArc”, “Volumetric modulated arc radiotherapy”, and “Intensity-modulated radiotherapy”

Spray-formed tooling

Science.gov (United States)

McHugh, K. M.; Key, J. F.

The United States Council for Automotive Research (USCAR) has formed a partnership with the Idaho National Engineering Laboratory (INEL) to develop a process for the rapid production of low-cost tooling based on spray forming technology developed at the INEL. Phase 1 of the program will involve bench-scale system development, materials characterization, and process optimization. In Phase 2, prototype systems will be designed, constructed, evaluated, and optimized. Process control and other issues that influence commercialization will be addressed during this phase of the project. Technology transfer to USCAR, or a tooling vendor selected by USCAR, will be accomplished during Phase 3. The approach INEL is using to produce tooling, such as plastic injection molds and stamping dies, combines rapid solidification processing and net-shape materials processing into a single step. A bulk liquid metal is pressure-fed into a de Laval spray nozzle transporting a high velocity, high temperature inert gas. The gas jet disintegrates the metal into fine droplets and deposits them onto a tool pattern made from materials such as plastic, wax, clay, ceramics, and metals. The approach is compatible with solid freeform fabrication techniques such as stereolithography, selective laser sintering, and laminated object manufacturing. Heat is extracted rapidly, in-flight, by convection as the spray jet entrains cool inert gas to produce undercooled and semi-solid droplets. At the pattern, the droplets weld together while replicating the shape and surface features of the pattern. Tool formation is rapid; deposition rates in excess of 1 ton/h have been demonstrated for bench-scale nozzles.

Advances in developing rapid, reliable and portable detection systems for alcohol.

Science.gov (United States)

Thungon, Phurpa Dema; Kakoti, Ankana; Ngashangva, Lightson; Goswami, Pranab

2017-11-15

Development of portable, reliable, sensitive, simple, and inexpensive detection system for alcohol has been an instinctive demand not only in traditional brewing, pharmaceutical, food and clinical industries but also in rapidly growing alcohol based fuel industries. Highly sensitive, selective, and reliable alcohol detections are currently amenable typically through the sophisticated instrument based analyses confined mostly to the state-of-art analytical laboratory facilities. With the growing demand of rapid and reliable alcohol detection systems, an all-round attempt has been made over the past decade encompassing various disciplines from basic and engineering sciences. Of late, the research for developing small-scale portable alcohol detection system has been accelerated with the advent of emerging miniaturization techniques, advanced materials and sensing platforms such as lab-on-chip, lab-on-CD, lab-on-paper etc. With these new inter-disciplinary approaches along with the support from the parallel knowledge growth on rapid detection systems being pursued for various targets, the progress on translating the proof-of-concepts to commercially viable and environment friendly portable alcohol detection systems is gaining pace. Here, we summarize the progress made over the years on the alcohol detection systems, with a focus on recent advancement towards developing portable, simple and efficient alcohol sensors. Copyright © 2017 Elsevier B.V. All rights reserved.

Rapid Prototyping: Technologies, Materials and Advances

Directory of Open Access Journals (Sweden)

Dudek P.

2016-06-01

Full Text Available In the context of product development, the term rapid prototyping (RP is widely used to describe technologies which create physical prototypes directly from digital data. Recently, this technology has become one of the fastest-growing methods of manufacturing parts. The paper provides brief notes on the creation of composites using RP methods, such as stereolithography, selective laser sintering or melting, laminated object modelling, fused deposition modelling or three-dimensional printing. The emphasis of this work is on the methodology of composite fabrication and the variety of materials used in these technologies.

The Bright Lights Grow Fainter - livelihoods, migration and a small town in Zimbabwe

OpenAIRE

Andersson, Agnes

2002-01-01

The Aids pandemic and structural adjustment policies (SAP) have had effects on lower income households in Zimbabwe which have been devastating and people have been required to adapt their livelihood strategies. Small towns meahnwhile are growing rapidly in Zimbabwe and mobility towards these towns may be connected with the changes being forged by SAP on the economic landscape. This study seeks to establish how the individual migrant uses mobility tot negotiate this landscape. This involves mo...

Seeking sunlight: rapid phototactic motility of filamentous mat-forming cyanobacteria optimize photosynthesis and enhance carbon burial in Lake Huron’s submerged sinkholes

Science.gov (United States)

Biddanda, Bopaiah A.; McMillan, Adam C.; Long, Stephen A.; Snider, Michael J.; Weinke, Anthony D.

2015-01-01

We studied the motility of filamentous mat-forming cyanobacteria consisting primarily of Oscillatoria-like cells growing under low-light, low-oxygen, and high-sulfur conditions in Lake Huron’s submerged sinkholes using in situ observations, in vitro measurements and time-lapse microscopy. Gliding movement of the cyanobacterial trichomes (100–10,000 μm long filaments, composed of cells ∼10 μm wide and ∼3 μm tall) revealed individual as well as group-coordinated motility. When placed in a petri dish and dispersed in ground water from the sinkhole, filaments re-aggregated into defined colonies within minutes, then dispersed again. Speed of individual filaments increased with temperature from ∼50 μm min-1 or ∼15 body lengths min-1 at 10°C to ∼215 μm min-1 or ∼70 body lengths min-1 at 35°C – rates that are rapid relative to non-flagellated/ciliated microbes. Filaments exhibited precise and coordinated positive phototaxis toward pinpoints of light and congregated under the light of foil cutouts. Such light-responsive clusters showed an increase in photosynthetic yield – suggesting phototactic motility aids in light acquisition as well as photosynthesis. Once light source was removed, filaments slowly spread out evenly and re-aggregated, demonstrating coordinated movement through inter-filament communication regardless of light. Pebbles and pieces of broken shells placed upon intact mat were quickly covered by vertically motile filaments within hours and became fully buried in the anoxic sediments over 3–4 diurnal cycles – likely facilitating the preservation of falling debris. Coordinated horizontal and vertical filament motility optimize mat cohesion and dynamics, photosynthetic efficiency and sedimentary carbon burial in modern-day sinkhole habitats that resemble the shallow seas in Earth’s early history. Analogous cyanobacterial motility may have played a key role in the oxygenation of the planet by optimizing photosynthesis while

Proliferative activity of endotheliocytes of growing capillaries of the rabbit cornea

International Nuclear Information System (INIS)

Gurina, O.Yu.; Mamontov, S.G.; Banin, V.V.

1987-01-01

The authors studied the intensity of DNA synthesis by cells of newly formed capillaries, growing in the rabbit cornea, after infliction of a silver nitrate burn and local application of colchicine. The intensity of capillary growth was investigated during stimulation and a combination of the burn with colchicine. Changes in activity of DNA synthesis by the endotheliocytes of newly formed capillaries during exposure throughout growth were also investigated. The intensity of cell proliferation was studied by measuring the incorporation of tritium-labelled thymidine into the endotheoiocyte nuclei

Elliptically fibered Calabi–Yau manifolds and the ring of Jacobi forms

Directory of Open Access Journals (Sweden)

Min-xin Huang

2015-09-01

Full Text Available We give evidence that the all genus amplitudes of topological string theory on compact elliptically fibered Calabi–Yau manifolds can be written in terms of meromorphic Jacobi forms whose weight grows linearly and whose index grows quadratically with the base degree. The denominators of these forms have a simple universal form with the property that the poles of the meromorphic form lie only at torsion points. The modular parameter corresponds to the fibre class while the role of the string coupling is played by the elliptic parameter. This leads to very strong all genus results on these geometries, which are checked against results from curve counting.

Cellobiose fermenting yeast produces varied forms of native ß-glucosidase

Science.gov (United States)

The rapid growing yeast strain NRRL Y-50464 is robust to environmental stress and resistant to 2-furaldehyde (furfural) and 5-[hydroxymethyl]-2-furaldehyde (HMF). It is able to utilize cellobiose as its sole source of carbon and produces ethanol from lignocellulosic biomass by simultaneous saccharif...

PRODUCTIVITY OF GROWING PONDS WHEN APPLYING THE BACTERIAL FERTILIZER «PHOSPHOBAKTERIN»

Directory of Open Access Journals (Sweden)

Т. Hryhorenko

2017-09-01

Full Text Available Purpose. To investigate the effect of the bacterial fertilizer "Phosphobacterin" on the formation of the hydrochemical regime, development of the natural food supply and fish productivity in the growing ponds. Methodology. The work was conducted according to generally accepted hydrochemical,, microbiological, hydrobiological and fish farming methods. Findings The article presents the results of a study of the productivity of growing ponds with different methods of the application of the bacterial fertilizer "Phosphobacterin". It was found that the hydrochemical regime of the experimental ponds was formed under the effect of the source of water supply and measures aimed at intensifying the development of the natural food supply and was favorable for the development of feed organisms and the cultivation of fish seeds. Application of the bacterial fertilizer at the beginning of the growing season along the water pond surface proved to be little effective for increasing the productivity of the pond ecosystem as a whole. A more effective method of increasing biological productivity, including fish productivity of growing ponds, was the application of "Phosphobacterin" during the growing season both on the bed and on the water surface in combination with the organic fertilizer - cattle humus. In the experimental pond under complex fertilization, the average phytoplankton biomass during the growing season was 1.5 times, bacterioplankton 1.1 times, zoobenthos 2.6 times higher, and the obtained total fish productivity was 1.2 times higher than in the control pond (when applying only cattle humus. Originality. The peculiarities of formation of hydrochemical and hydrobiological (phyto-, bacterio-, zooplankton, zoobenthos regimes of growing ponds and the fishery indices are studied, both for bacterial fertilizer "Phosphobacterin" independently and together with the traditional organic fertilizer - cattle humus. Practical value. Based on the obtained results

Food (In)Security in Rapidly Urbanising, Low-Income Contexts.

Science.gov (United States)

Tacoli, Cecilia

2017-12-11

Urbanisation in low and middle-income nations presents both opportunities and immense challenges. As urban centres grow rapidly, inadequate housing and the lack of basic infrastructure and services affect a large and growing proportion of their population. There is also a growing body of evidence on urban poverty and its links with environmental hazards. There is, however, limited knowledge of how these challenges affect the ways in which poor urban residents gain access to food and secure healthy and nutritious diets. With some important exceptions, current discussions on food security continue to focus on production, with limited attention to consumption. Moreover, urban consumers are typically treated as a homogenous group and access to food markets is assumed to be sufficient. This paper describes how, for the urban poor in low and middle-income countries, food affordability and utilisation are shaped by the income and non-income dimensions of poverty that include the urban space.

Food (InSecurity in Rapidly Urbanising, Low-Income Contexts

Directory of Open Access Journals (Sweden)

Cecilia Tacoli

2017-12-01

Full Text Available Urbanisation in low and middle-income nations presents both opportunities and immense challenges. As urban centres grow rapidly, inadequate housing and the lack of basic infrastructure and services affect a large and growing proportion of their population. There is also a growing body of evidence on urban poverty and its links with environmental hazards. There is, however, limited knowledge of how these challenges affect the ways in which poor urban residents gain access to food and secure healthy and nutritious diets. With some important exceptions, current discussions on food security continue to focus on production, with limited attention to consumption. Moreover, urban consumers are typically treated as a homogenous group and access to food markets is assumed to be sufficient. This paper describes how, for the urban poor in low and middle-income countries, food affordability and utilisation are shaped by the income and non-income dimensions of poverty that include the urban space.

Diversity, community composition, and dynamics of nonpigmented and late-pigmenting rapidly growing mycobacteria in an urban tap water production and distribution system.

Science.gov (United States)

Dubrou, S; Konjek, J; Macheras, E; Welté, B; Guidicelli, L; Chignon, E; Joyeux, M; Gaillard, J L; Heym, B; Tully, T; Sapriel, G

2013-09-01

Nonpigmented and late-pigmenting rapidly growing mycobacteria (RGM) have been reported to commonly colonize water production and distribution systems. However, there is little information about the nature and distribution of RGM species within the different parts of such complex networks or about their clustering into specific RGM species communities. We conducted a large-scale survey between 2007 and 2009 in the Parisian urban tap water production and distribution system. We analyzed 1,418 water samples from 36 sites, covering all production units, water storage tanks, and distribution units; RGM isolates were identified by using rpoB gene sequencing. We detected 18 RGM species and putative new species, with most isolates being Mycobacterium chelonae and Mycobacterium llatzerense. Using hierarchical clustering and principal-component analysis, we found that RGM were organized into various communities correlating with water origin (groundwater or surface water) and location within the distribution network. Water treatment plants were more specifically associated with species of the Mycobacterium septicum group. On average, M. chelonae dominated network sites fed by surface water, and M. llatzerense dominated those fed by groundwater. Overall, the M. chelonae prevalence index increased along the distribution network and was associated with a correlative decrease in the prevalence index of M. llatzerense, suggesting competitive or niche exclusion between these two dominant species. Our data describe the great diversity and complexity of RGM species living in the interconnected environments that constitute the water production and distribution system of a large city and highlight the prevalence index of the potentially pathogenic species M. chelonae in the distribution network.

Impacts of bus rapid transit (BRT) on surrounding residential property values : final report.

Science.gov (United States)

2017-07-01

As bus rapid transit (BRT) grows in popularity in the United States, a better understanding of the modes impacts on land uses and property values is needed. Economic theory suggests, and literature has shown, that people are willing to pay higher ...

Heating- and growing-degree days at Chalk River Nuclear Laboratories, 1976-1980

International Nuclear Information System (INIS)

Jay, P.C.; Wildsmith, D.P.

1981-05-01

An update of the report, Heating- and Growing-Degree-Days at Chalk River Nuclear Laboratories (AECL-5547) is presented along with various other meteorological variables which were not included in the previous publication. Also included, and shown in graph form, are the monthly degree-day frequencies. (author)

Lead deposit on vegetation growing along highways traveled by automobiles. Milk cow feeding experiments with hay contaminated with lead

Energy Technology Data Exchange (ETDEWEB)

Bovay, E

1971-03-01

Measurements conducted in Switzerland from 1967 through 1970 revealed that vegetation growing along highways contained lead in concentrations in excess of 100 ppm. Although the amounts of lead in vegetation rapidly decrease with distance from the highway, lead can be detected up to a distance of about 100 M. The rate and extent of dispersion of lead particles depended on seasonal orographic and/or meteorological conditions. Lead retention by different plant organs is governed by their nature and composition. Plants with large hairy leaves or leaves with a rough surface accumulate much more lead than plants with smooth leaves. From 35-65% of the plant tissue lead content can be removed by thorough washing, an indication that the contamination consists for the most part in a surface deposit. But plant roots growing in lead-contaminated soil absorb the element, even if present in a relatively insoluble form. In spite of these observations, no symptoms of plant disease or a decrease in crop yield has been noted. High tightly growing hedges of perennials (pine or fir) markedly reduce the dispersion of exhaust gases. Feeding trials with mild cows involving hay harvested along highways demonstrated that a high percentage of the lead ingested with the fodder was eliminated. Some organs like bones, kidneys, and the liver accumulated large quantities of lead (up to 21-fold quantities). After four weeks on the contaminated hay, the lead content in milk quadrupled. The cows ingested 1300 mg lead daily with contaminated fodder containing 99 ppm Pb. Toxic symptoms in cattle and horses do not appear until an ingestion level of about 2200 mg Pb/day is reached. 36 references.

Effects of floor cooling during high ambient temperatures on the lying behavior and productivity of growing finishing pigs

NARCIS (Netherlands)

Huynh Thi Thanh Thuy,; Aarnink, A.J.A.; Spoolder, H.A.M.; Verstegen, M.W.A.; Kemp, B.

2004-01-01

Given that exposing rapidly growing pigs to high ambient temperatures can induce heat stress, which reduces their welfare and production, this study looked at the influence of floor cooling on pigs¿ behavior and performance. Pens in room 1 had a solid floor (60%) and a metal slatted floor (40%). The

Tobacco-control policies in tobacco-growing states: where tobacco was king.

Science.gov (United States)

Fallin, Amanda; Glantz, Stanton A

2015-06-01

POLICY POINTS: The tobacco companies prioritized blocking tobacco-control policies in tobacco-growing states and partnered with tobacco farmers to oppose tobacco-control policies. The 1998 Master Settlement Agreement, which settled state litigation against the cigarette companies, the 2004 tobacco-quota buyout, and the companies' increasing use of foreign tobacco led to a rift between the companies and tobacco farmers. In 2003, the first comprehensive smoke-free local law was passed in a major tobacco-growing state, and there has been steady progress in the region since then. Health advocates should educate the public and policymakers on the changing reality in tobacco-growing states, notably the major reduction in the volume of tobacco produced. The 5 major tobacco-growing states (Kentucky, North Carolina, South Carolina, Tennessee, and Virginia) are disproportionately affected by the tobacco epidemic, with higher rates of smoking and smoking-induced disease. These states also have fewer smoke-free laws and lower tobacco taxes, 2 evidence-based policies that reduce tobacco use. Historically, the tobacco farmers and hospitality associations allied with the tobacco companies to oppose these policies. This research is based on 5 detailed case studies of these states, which included key informant interviews, previously secret tobacco industry documents (available at http://legacy.library.ucsf.edu), and media articles. This was supplemented with additional tobacco document and media searches specifically for this article. The tobacco companies were particularly concerned about blocking tobacco-control policies in the tobacco-growing states by promoting a pro-tobacco culture, beginning in the late 1960s. Nevertheless, since 2003, there has been rapid progress in the tobacco-growing states' passage of smoke-free laws. This progress came after the alliance between the tobacco companies and the tobacco farmers fractured and hospitality organizations stopped opposing smoke

Unusual fast-growing ovarian cystic teratoma during pregnancy presenting with intracystic fat "floating balls" appearance.

Science.gov (United States)

Donnadieu, Anne Claire; Deffieux, Xavier; Le Ray, Camille; Mordefroid, Marie; Frydman, René; Fernandez, Hervé

2006-12-01

A large ovarian cyst was diagnosed at 22 weeks' of gestation in a 32-year-old woman. The ultrasonographic appearance of the ovarian cyst was unusual with multiple mobile, spherical echogenic structures floating in the cystic mass, called intracystic "fat balls." Right adnexectomy was performed by laparotomy at 28 weeks' of gestation, because of rapid growth and overall size exceeding 20 cm. Pathological examination confirmed ovarian cystic teratoma. Usually, dermoid cysts are slow-growing, even in premenopausal women. The exact mechanism related to the fast growth during pregnancy is unknown. It could be related to an unusual pattern of estrogen (E)/P receptors expression in the cystic teratoma. This case shows that a fast-growing, mature ovarian cystic teratoma may occur during pregnancy.

Challenges of the growing African cement market – environmental issues, regulative framework, and quality infrastructure requirements

Directory of Open Access Journals (Sweden)

Schmidt Wolfram

2018-01-01

Full Text Available The African cement, concrete and construction business is growing at rapid pace. The cement sales are expected to grow rapidly until 2050. The number of newly built cement plants increases dramatically and in addition more cements are being imported from outside the continent, e.g. from Turkey, Pakistan, Indonesia, and China, driven by overcapacities in the countries of origin. This causes a high number of potentials and challenges at the same time. Newly built cement plants can operate directly at best technological state of the art and thus incorporate more sustainable technologies as well as produce new and more sustainable products such as cements blended with sustainable supplementary cementitious materials such as calcined clays, and industrial or agricultural by products. At the same time the new variety of binding agent as well as the international imports, which are driven by price considerations, make the cement market prone to quality scatter. This puts pressure on the quality control regulations and institutions to ensure safety of construction, healthy application, and environmental safety for the population. The paper presents possible solutions to build up the rapidly increasing African cement production more sustainably than in the rest of the world as well as the related challenges and obstacles that need to be overcome. Based on experiences with a series of pan-African cement testing laboratory proficiency schemes conclusions are made on technical, regulative and political level.

Crack Tip Parameters for Growing Cracks in Linear Viscoelastic Materials

DEFF Research Database (Denmark)

Brincker, Rune

In this paper the problem of describing the asymptotic fields around a slowly growing crack in a linearly viscoelastic material is considered. It is shown that for plane mixed mode problems the asymptotic fields must be described by 6 parameters: 2 stress intensity factors and 4 deformation...... intensity factors. In the special case of a constant Poisson ratio only 2 deformation intensity factors are needed. Closed form solutions are given both for a slowly growing crack and for a crack that is suddenly arrested at a point at the crack extension path. Two examples are studied; a stress boundary...... value problem, and a displacement boundary value problem. The results show that the stress intensity factors and the displacement intensity factors do not depend explicitly upon the velocity of the crack tip....

Temperature Sensitivity of Soil Respiration to Nitrogen Fertilization: Varying Effects between Growing and Non-Growing Seasons

Science.gov (United States)

Liu, Qingfang; Wang, Rui; Li, Rujian; Hu, Yaxian; Guo, Shengli

2016-01-01

Nitrogen (N) fertilization has a considerable effect on food production and carbon cycling in agro-ecosystems. However, the impacts of N fertilization rates on the temperature sensitivity of soil respiration (Q10) were controversial. Five N rates (N0, N45, N90, N135, and N180) were applied to a continuous winter wheat (Triticum aestivum L.) crop on the semi-arid Loess Plateau, and the in situ soil respiration was monitored during five consecutive years from 2008 to 2013. During the growing season, the mean soil respiration rates increased with increasing N fertilization rates, peaking at 1.53 μmol m−2s−1 in the N135 treatment. A similar dynamic pattern was observed during the non-growing season, yet on average with 7.3% greater soil respiration rates than the growing season. In general for all the N fertilization treatments, the mean Q10 value during the non-growing season was significantly greater than that during the growing season. As N fertilization rates increased, the Q10 values did not change significantly in the growing season but significantly decreased in the non-growing season. Overall, N fertilization markedly influenced soil respirations and Q10 values, in particular posing distinct effects on the Q10 values between the growing and non-growing seasons. PMID:27992576

Levels of specificity of Xylaria species associated with fungus-growing termites: a phylogenetic approach

DEFF Research Database (Denmark)

Visser, Andre; Ros, V I D; De Beer, Z. W.

2009-01-01

of the ascomycete genus Xylaria appear and rapidly cover the fungus garden. This raises the question whether certain Xylaria species are specialised in occupying termite nests or whether they are just occasional visitors. We tested Xylaria specificity at four levels: (1) fungus-growing termites, (2) termite genera...... of the ITS region revealed 16 operational taxonomic units of Xylaria, indicating high levels of Xylaria species richness. Not much of this variation was explained by termite genus, species, or colony; thus, at level 2-4 the specificity is low. Analysis of the large subunit rDNA region, showed that all...... termite-associated Xylaria belong to a single clade, together with only three of the 26 non-termite-associated strains. Termite-associated Xylaria thus show specificity for fungus-growing termites (level 1). We did not find evidence for geographic or temporal structuring in these Xylaria phylogenies...

EMERGING TRENDS IN TOURISM: NEED FOR ALTERNATIVE FORMS IN MACEDONIAN TOURISM

Directory of Open Access Journals (Sweden)

Nikola Cuculeski

2015-11-01

Full Text Available The purpose of this paper is to research the development of tourism, taking into consideration the growing competition and new consumer intentions. The aim of this research is to analyze the alternative forms of tourism as a crucial factor for long term sustainability. As a basic research method used is an interview with tourist providers in Macedonia (travel agencies – DMC companies and tourist guides, regarding their experience for alternative tourism forms. Results are showing growing trend of alternative forms of tourism considering different tourist nationalities. These results are valuable for further scientific research in consumer analyzes, and presents an input for the national tourism in this region.

From Kennedy, to Beyond: Growing Plants in Space

Science.gov (United States)

Flemming, Cedric, II; Seck, Sokhana A.; Massa, Gioia D.; Hummerick, Mary E.; Wheeler, Raymond

2012-01-01

Astronauts cannot have their cake and eat it too, but what about growing a salad and eating it? As NASA continues to push the envelope on Space exploration and inhabitance the need for a fresh food source becomes more vital. The Life Support team at NASA is using a system developed by ORBITEC the VEGGIE, in which astronauts aboard the ISS, and potentially the Moon and Mars, will be capable of growing food. The introduction of plants not only gives astronauts a means of independently supplying food, but also recreation, oxygen replenishment and psychological benefits. The plants were grown in "pillows", the system used for growing plants within the VEGGIE. This test included 4 types of media mixtures that are composed of a clay based media called Arcilite and Fafard #2, which is a peat moss-based media ( <1 mm Arcilite, 1-2 mm of Arcilite, 1:1 <1 mm & 1-2 mm mixture and 1:1 Arcilite & Fafard mixture). Currently, 3 lettuce cultivars are being grown in 4 mixtures of media. Tests were being conducted to see which form of media has the ratio of best growth and least amount of microbes that are harmful. That is essential because a person's body becomes more susceptible to illness when they leave Earth. As a result, test must be conducted on the "pillow" system to assess the levels of microbial activity. The cultivars were tested at different stages during their growing process for microbes. Datum show that the mix of Fafard and Arcilite had the best growth, but also the most microbes. This was due to the fact that Fafard is an organic substance so it contains material necessary for microbes to live. Data suggest that the <1 mm Arcilite has an acceptable amount of growth and a lower level of microbes, because it is non-organic.

Growing media constituents determine the microbial nitrogen conversions in organic growing media for horticulture.

Science.gov (United States)

Grunert, Oliver; Reheul, Dirk; Van Labeke, Marie-Christine; Perneel, Maaike; Hernandez-Sanabria, Emma; Vlaeminck, Siegfried E; Boon, Nico

2016-05-01

Vegetables and fruits are an important part of a healthy food diet, however, the eco-sustainability of the production of these can still be significantly improved. European farmers and consumers spend an estimated €15.5 billion per year on inorganic fertilizers and the production of N-fertilizers results in a high carbon footprint. We investigated if fertilizer type and medium constituents determine microbial nitrogen conversions in organic growing media and can be used as a next step towards a more sustainable horticulture. We demonstrated that growing media constituents showed differences in urea hydrolysis, ammonia and nitrite oxidation and in carbon dioxide respiration rate. Interestingly, mixing of the growing media constituents resulted in a stimulation of the function of the microorganisms. The use of organic fertilizer resulted in an increase in amoA gene copy number by factor 100 compared to inorganic fertilizers. Our results support our hypothesis that the activity of the functional microbial community with respect to nitrogen turnover in an organic growing medium can be improved by selecting and mixing the appropriate growing media components with each other. These findings contribute to the understanding of the functional microbial community in growing media and its potential role towards a more responsible horticulture. © 2016 The Authors. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

Biorock Electric Reefs Grow Back Severely Eroded Beaches in Months

Directory of Open Access Journals (Sweden)

Thomas J. F. Goreau

2017-10-01

Full Text Available Severely eroded beaches on low lying islands in Indonesia were grown back in a few months—believed to be a record—using an innovative method of shore protection, Biorock electric reef technology. Biorock shore protection reefs are growing limestone structures that get stronger with age and repair themselves, are cheaper than concrete or rock sea walls and breakwaters, and are much more effective at shore protection and beach growth. Biorock reefs are permeable, porous, growing, self-repairing structures of any size or shape, which dissipate wave energy by internal refraction, diffraction, and frictional dissipation. They do not cause reflection of waves like hard sea walls and breakwaters, which erodes the sand in front of, and then underneath, such structures, until they collapse. Biorock reefs stimulate settlement, growth, survival, and resistance to the environmental stress of all forms of marine life, restoring coral reefs, sea grasses, biological sand production, and fisheries habitat. Biorock reefs can grow back eroded beaches and islands faster than the rate of sea level rise, and are the most cost-effective method of shore protection and adaptation to global sea level rise for low lying islands and coasts.

Length scales in glass-forming liquids and related systems: a review

International Nuclear Information System (INIS)

Karmakar, Smarajit; Dasgupta, Chandan; Sastry, Srikanth

2016-01-01

The central problem in the study of glass-forming liquids and other glassy systems is the understanding of the complex structural relaxation and rapid growth of relaxation times seen on approaching the glass transition. A central conceptual question is whether one can identify one or more growing length scale(s) associated with this behavior. Given the diversity of molecular glass-formers and a vast body of experimental, computational and theoretical work addressing glassy behavior, a number of ideas and observations pertaining to growing length scales have been presented over the past few decades, but there is as yet no consensus view on this question. In this review, we will summarize the salient results and the state of our understanding of length scales associated with dynamical slow down. After a review of slow dynamics and the glass transition, pertinent theories of the glass transition will be summarized and a survey of ideas relating to length scales in glassy systems will be presented. A number of studies have focused on the emergence of preferred packing arrangements and discussed their role in glassy dynamics. More recently, a central object of attention has been the study of spatially correlated, heterogeneous dynamics and the associated length scale, studied in computer simulations and theoretical analysis such as inhomogeneous mode coupling theory. A number of static length scales have been proposed and studied recently, such as the mosaic length scale discussed in the random first-order transition theory and the related point-to-set correlation length. We will discuss these, elaborating on key results, along with a critical appraisal of the state of the art. Finally we will discuss length scales in driven soft matter, granular fluids and amorphous solids, and give a brief description of length scales in aging systems. Possible relations of these length scales with those in glass-forming liquids will be discussed. (review article)

Evolution in an Afternoon: Rapid Natural Selection and Adaptation of Bacterial Populations

Science.gov (United States)

Delpech, Roger

2009-01-01

This paper describes a simple, rapid and low-cost technique for growing bacteria (or other microbes) in an environmental gradient, in order to determine the tolerance of the microbial population to varying concentrations of sodium chloride ions, and suggests how the evolutionary response of a microbial population to the selection pressure of the…

Hyperspectral image analysis for rapid and accurate discrimination of bacterial infections: A benchmark study.

Science.gov (United States)

Arrigoni, Simone; Turra, Giovanni; Signoroni, Alberto

2017-09-01

With the rapid diffusion of Full Laboratory Automation systems, Clinical Microbiology is currently experiencing a new digital revolution. The ability to capture and process large amounts of visual data from microbiological specimen processing enables the definition of completely new objectives. These include the direct identification of pathogens growing on culturing plates, with expected improvements in rapid definition of the right treatment for patients affected by bacterial infections. In this framework, the synergies between light spectroscopy and image analysis, offered by hyperspectral imaging, are of prominent interest. This leads us to assess the feasibility of a reliable and rapid discrimination of pathogens through the classification of their spectral signatures extracted from hyperspectral image acquisitions of bacteria colonies growing on blood agar plates. We designed and implemented the whole data acquisition and processing pipeline and performed a comprehensive comparison among 40 combinations of different data preprocessing and classification techniques. High discrimination performance has been achieved also thanks to improved colony segmentation and spectral signature extraction. Experimental results reveal the high accuracy and suitability of the proposed approach, driving the selection of most suitable and scalable classification pipelines and stimulating clinical validations. Copyright © 2017 Elsevier Ltd. All rights reserved.

A growing danger: the risks posed by marihuana grow-ops

Energy Technology Data Exchange (ETDEWEB)

Bradley, F. [Canadian Electricity Association (Canada)

2005-02-01

The proliferation of sophisticated illegal indoor multi-plant marihuana cultivation operations is discussed, focusing primarily on public health and safety issues. Public health issues arise from the high level of molds and pollens caused by high humidity, which can cause asthma, respiratory conditions and allergies, particularly among children, and the likelihood of deadly levels of carbon monoxide build-up resulting from faulty rerouting of the residence's ventilation system. Safety issues discussed are: fires and electrocutions associated with the use of electrical diversions or bipasses to circumvent utility meters, the chemical and electrical hazards involved in investigating and dismantling growing operations, the significant dangers to utility crews who must repair illegal electrical bypasses, injuries by the booby-traps planted to protect the operation from other criminals or law enforcement agents, and the physical danger from the violence, including homicide and assaults, carried out by operators to exert control over production and distribution. Although in general, there is a relaxed attitude towards marihuana use in Canada. there is growing evidence of increasing public concern over large-scale growing operations. Nevertheless, to date operators of grow-ops have been dealt with lightly by the justice system. For example, in British Columbia 11,733 cases have come to the attention of police during the 1997 to 2000 period. Of these about half were dealt with informally (i.e. 'no case' seizures) and 2,255 cases led to at least one offender being convicted. The majority of convictions did not result in custodial dispositions. Only 18 per cent of the cases resulted in prison sentences, the average term being only 4.5 months.

New techniques for growing anaerobic bacteria: experiments with Clostridium butyricum and Clostridium acetobutylicum

International Nuclear Information System (INIS)

Adler, H.I.; Crow, W.D.; Hadden, C.T.; Hall, J.; Machanoff, R.

1983-01-01

Stable membrane fragments derived from Escherichia coli produce and maintain strict anaerobic conditions when added to liquid or solid bacteriological media. Techniques for growing Clostridium butyricum and Clostridium acetobutylicum in membrane-containing media are described. Liquid cultures initiated by very small inocula can be grown in direct contact with air. In solid media, colonies develop rapidly from individual cells even without incubation in anaerobic jars or similar devices. Observations on growth rates, spontaneous mutations, radiation, and oxygen sensitivity of anaerobic bacteria have been made using these new techniques

Rapid compression induced solidification of two amorphous phases of poly(ethylene terephthalate)

Energy Technology Data Exchange (ETDEWEB)

Hong, S M [Laboratory of High Pressure Physics, Southwest Jiaotong University, Chengdu, 610031 (China); Liu, X R [Laboratory of High Pressure Physics, Southwest Jiaotong University, Chengdu, 610031 (China); Su, L [Laboratory of High Pressure Physics, Southwest Jiaotong University, Chengdu, 610031 (China); Huang, D H [Laboratory of High Pressure Physics, Southwest Jiaotong University, Chengdu, 610031 (China); Li, L B [Foods Research Centre Unilever R and D, Vlaardingen Olivier van Noortlaan, 120, 3133 AT Vlaardingen (Netherlands)

2006-08-21

Melts of poly(ethylene terephthalate) were solidified by rapid compression to 2 GPa within 20 ms and by a series of comparative processes including natural cooling, slow compressing and rapid cooling, respectively. By combining XRD and differential scanning calorimetry data of the recovered samples, it is made clear that rapid compression induces two kinds of amorphous phases. One is relatively stable and can also be formed in the slow compression and the cooling processes. Another is metastable and transforms to crystalline phase at 371 K. This metastable amorphous phase cannot be obtained by slow compression or natural cooling, and its crystallization temperature is remarkably different from that of the metastable amorphous phase formed in the rapid cooling sample.

Water hammer caused by rapid gas production in a severe accident in a light water reactor

International Nuclear Information System (INIS)

Inasaka, Fujio; Adachi, Masaki; Aya, Izuo; Nariai, Hideki; Shiozaki, Kohki

2005-01-01

We investigated the water hammer caused by striking of water mass pushed up by a rapidly growing bubble and its scale effects using two cylindrical model containment vessels of 1.0 and 0.428 m diameters. We also closely observed the movement of water mass and the growing bubble in the vessels. In these experiments, rapid bubble growth was simulated by injecting high-pressure air into a water pool. It was clarified that the water mass was pushed up without any air penetration until the water level reached a certain elevation. On the basis of all data, experimental correlations for estimating the height and striking velocity of the water mass with coherency were proposed, and the water hammer pressure for exerting large forces on the structures was quantitatively evaluated. (author)

Consumer cooperatives as a new governance form : the case of the cooperatives in the broadband industry

NARCIS (Netherlands)

Sadowski, B.M.

2014-01-01

Since Williamson’s semi-final paper (1975) on governance forms in a market economy, a growing number of studies have focused on new forms of governance, but research seems to have neglected consumer cooperatives despite their growing importance in some sectors of the economy. With an increasing

Obesity reduces bone density through activation of PPAR gamma and suppression of Wnt/Beta-Catenin in rapidly growing male rats

Science.gov (United States)

The relationship between obesity and skeletal development remains largely ambiguous. In this report, total enteral nutrition (TEN) was used to feed growing male rats intragastrically, with a high 45% fat diet (HFD) to induce obesity. We found that fat mass was increased (P<0.05) compared to rats fed...

The rapid growth of OPEC′s domestic oil consumption

International Nuclear Information System (INIS)

Gately, Dermot; Al-Yousef, Nourah; Al-Sheikh, Hamad M.H.

2013-01-01

OPEC′s domestic oil consumption has increased seven-fold in 40 years, to 8.5 million barrels per day (mbd). They consume almost as much oil as China. This constitutes one-fourth of their production. Such rapid growth in consumption (5.1% annually, faster than their income growth of 3.1%) will challenge OPEC′s ability to increase their oil exports, which are relied upon in long-term world oil projections by the International Energy Agency (IEA), US Department of Energy (DOE/EIA) and British Petroleum (BP). However, these institutions assume unprecedented slowdowns in OPEC oil consumption – to less than 2% in the future – allowing them to project increases in OPEC oil exports with only modest increases in production. We analyze 1971–2010 data econometrically, with panel co-integration methods. We estimate that the income elasticity of consumption is about 1 for energy and oil. This means that OPEC′s energy and oil consumption will grow as rapidly as their income. Hence, continued high growth rates for domestic oil consumption are more likely than the unprecedented slowdowns projected by IEA, DOE/EIA and BP – adding an extra 6 mbd of OPEC consumption in 2030. This will have major implications for OPEC production and export levels, and for world oil prices. -- Highlights: •We analyze rapid growth of OPEC oil consumption (sevenfold since 1971: 5.1% annually). •Panel co-integration econometric estimate of income elasticity about 1.0. •Consensus projections (IEA, DOE/EIA) have consistently under projected OPEC consumption. •Future oil market implications if OPEC consumption grows as fast as income (as in past)

New Visions on Form and Growth

International Nuclear Information System (INIS)

Howard, M

2005-01-01

It is now nearly 90 years since the publication of D'Arcy Thompson's book On Growth and Form, a classic work that attempted a unification of pattern-forming phenomena in systems ranging from inanimate to living matter. Thompson's book came early in the development of mathematical techniques in biology. His work has had enormous influence in succeeding decades and has helped inspire the rapid growth in the application of theoretical techniques to biological phenomena. Pelce's book New Visions on Form and Growth takes its inspiration and title directly from D'Arcy Thompson. Furthermore, Pelce attempts what could not be achieved in D'Arcy Thompson's time, namely the presentation of a quantitative analysis of pattern forming phenomena. However, it should be emphasised that the vast majority of this book is concerned with inanimate matter, with rather little discussion of biology. The book begins with a presentation of the basic physics, including surface tension, first-order phase transition kinetics and a brief outline of chemical kinetics. With the essential physics established, Pelce then investigates simple growth forms, before showing how these regular geometries are destabilized into more complex forms by instabilities. The problem of velocity selection of growing patterns is then extensively discussed, before the question of (secondary) instabilities of the more complex growth forms is analysed. A chapter on stochastic patterns is also included. For the most part, the book concentrates on a few intensively studied pattern forming systems in physics, particularly viscous fingering in Hele-Shaw cells, the growth of dendrites, electrodeposition, flames, and, in the chapter on stochastic patterns, diffusion-limited aggregation. Only in a rather brief final chapter is a more speculative link made with biological pattern formation and morphogenesis. In general, I found the book to be a useful reference work on the theory of pattern forming systems. However, the

Amorphous Alloy: Promising Precursor to Form Nanoflowerpot

Directory of Open Access Journals (Sweden)

Guo Lan

2014-01-01

Full Text Available Nanoporous copper is fabricated by dealloying the amorphous Ti2Cu alloy in 0.03 M HF electrolyte. The pore and ligament sizes of the nanoporous copper can be readily tailored by controlling the dealloying time. The as-prepared nanoporous copper provides fine and uniform nanoflowerpots to grow highly dispersed Au nanoflowers. The blooming Au nanoflowers in the nanoporous copper flowerpots exhibit both high catalytic activity and stability towards the oxidation of glucose, indicating that the amorphous alloys are ideal precursors to form nanoflowerpot which can grow functional nanoflowers.

Rapid adaptation to oil exposure in the cosmopolitan copepod Acartia tonsa

DEFF Research Database (Denmark)

Krause, K. E.; Dinh, Khuong Van; Nielsen, Torkel Gissel

Oil spills are potential environmental hazards to marine ecosystems worldwide. Oil spills may persist in seawater longer than one generation of many zooplankton species. However, whether populations of short-lived and fast growing marine organisms adapt to oil exposure through natural selection...... in size at maturity of females was less pronounced in the second generation. Strikingly, both survival, egg production and hatching success were recovered in the second generation, indicating a rapid selection towards individuals with adaptations to deal with pyrene exposure. Our results show...... that populations of short-lived and fast-growing copepods have the potential of showing surprisingly strong resilience to the type of oil contamination they might face in their natural coastal habitats...

Environmentally Benign Tribo-systems for Metal Forming

DEFF Research Database (Denmark)

Bay, Niels; Azushima, A.; Groche, P.

2010-01-01

The growing awareness of environmental issues and the requirements to establish solutions diminishing the impact on working environment as well as external environment has initiated ever increasing efforts to develop new, environmentally benign tribological systems for metal forming. The present ...

Relatively Inexpensive Rapid Prototyping of Small Parts

Science.gov (United States)

Swan, Scott A.

2003-01-01

Parts with complex three-dimensional shapes and with dimensions up to 8 by 8 by 10 in. (20.3 by 20.3 by 25.4 cm) can be made as unitary pieces of a room-temperature-curing polymer, with relatively little investment in time and money, by a process now in use at Johnson Space Center. The process is one of a growing number of processes and techniques that are known collectively as the art of rapid prototyping. The main advantages of this process over other rapid-prototyping processes are greater speed and lower cost: There is no need to make paper drawings and take them to a shop for fabrication, and thus no need for the attendant paperwork and organizational delays. Instead, molds for desired parts are made automatically on a machine that is guided by data from a computer-aided design (CAD) system and can reside in an engineering office.

A Practical Approach to Rapid Prototyping of SCA Waveforms

OpenAIRE

DePriest, Jacob Andrew

2006-01-01

With the growing interest in software defined radios (SDRs), cognitive radios, the Joint Tactical Radio System (JTRS), and the Software Communication Architecture (SCA) comes the need for a rapid prototyping approach to radio design. In the past, radios have traditionally been designed to have a static implementation with the express goal of implementing a specific type of communication, such as 802.11b, CDMA voice communication, or just a simple FM tuner. However, when designing an ...

Rapidity resummation for B-meson wave functions

Directory of Open Access Journals (Sweden)

Shen Yue-Long

2014-01-01

Full Text Available Transverse-momentum dependent (TMD hadronic wave functions develop light-cone divergences under QCD corrections, which are commonly regularized by the rapidity ζ of gauge vector defining the non-light-like Wilson lines. The yielding rapidity logarithms from infrared enhancement need to be resummed for both hadronic wave functions and short-distance functions, to achieve scheme-independent calculations of physical quantities. We briefly review the recent progress on the rapidity resummation for B-meson wave functions which are the key ingredients of TMD factorization formulae for radiative-leptonic, semi-leptonic and non-leptonic B-meson decays. The crucial observation is that rapidity resummation induces a strong suppression of B-meson wave functions at small light-quark momentum, strengthening the applicability of TMD factorization in exclusive B-meson decays. The phenomenological consequence of rapidity-resummation improved B-meson wave functions is further discussed in the context of B → π transition form factors at large hadronic recoil.

Rapidly-administered short forms of the Wechsler Adult Intelligence Scale-3rd edition.

Science.gov (United States)

Donnell, Alison J; Pliskin, Neil; Holdnack, James; Axelrod, Bradley; Randolph, Christopher

2007-11-01

Although the Wechsler Full Scale IQ (FSIQ) is a common component of most neuropsychological evaluations, there are many clinical situations where the complete administration of this battery is precluded by various constraints, including limitations of time and patient compliance. These constraints are particularly true for dementia evaluations involving elderly patients. The present study reports data on two short forms particularly suited to dementia evaluations, each requiring less than 20min of administration time. One of the short forms was previously validated in dementia for the WAIS-R [Randolph, C., Mohr, E., & Chase, T. N. (1993). Assessment of intellectual function in dementing disorders: Validity of WAIS-R short forms for patients with Alzheimer's, Huntington's, and Parkinson's disease. Journal of Clinical and Experimental Neuropsychology, 15, 743-753]; the second was developed specifically for patients with motor disabilities. These short forms were validated using the WAIS-III normative standardization sample (N=2450), neurologic sample (N=63), and matched controls (N=49), and a separate mixed clinical sample (N=70). The results suggest that each short form provides an accurate and reliable estimate of WAIS-III FSIQ, validating their use in appropriate clinical contexts. The present data support the use of these short forms for dementia evaluations, and suggests that they may be applicable for the evaluation of other neurological and neuropsychiatric disorders that involve acquired neurocognitive impairment.

Optimum Combining for Rapidly Fading Channels in Ad Hoc Networks

Directory of Open Access Journals (Sweden)

Sonia Furman

2003-10-01

Full Text Available Research and technology in wireless communication systems such as radar and cellular networks have successfully implemented alternative design approaches that utilize antenna array techniques such as optimum combining, to mitigate the degradation effects of multipath in rapid fading channels. In ad hoc networks, these methods have not yet been exploited primarily due to the complexity inherent in the network's architecture. With the high demand for improved signal link quality, devices configured with omnidirectional antennas can no longer meet the growing need for link quality and spectrum efficiency. This study takes an empirical approach to determine an optimum combining antenna array based on 3 variants of interelement spacing. For rapid fading channels, the simulation results show that the performance in the network of devices retrofitted with our antenna arrays consistently exceeded those with an omnidirectional antenna. Further, with the optimum combiner, the performance increased by over 60% compared to that of an omnidirectional antenna in a rapid fading channel.

Formation of bands of ultrafine beryllium particles during rapid solidification of Al-Be alloys: Modeling and direct observations

International Nuclear Information System (INIS)

Elmer, J.W.; Tanner, L.E.; Smith, P.M.; Wall, M.A.; Aziz, M.J.

1994-01-01

Rapid solidification of dilute hyper-eutectic and monotectic alloys sometimes produces a dispersion of ultrafine randomly-oriented particles that lie in arrays parallel to the advancing solidification front. The authors characterize this effect in Al-Be where Be-rich particles with diameters on the order of 10 nm form in arrays spaced approximately 25 nm apart, and they present a model of macroscopically steady state but microscopically oscillatory motion of the solidification front to explain this unusual microstructure. The proposed mechanism involves; (i) the build-up of rejected solute in a diffusional boundary layer which slows down the growing crystal matrix, (2) the boundary layer composition entering a metastable liquid miscibility gap, (3) homogeneous nucleation of solute rich liquid droplets in the boundary layer, and crystallization of these droplets, and (4) growth of the matrix past the droplets and its reformation into a planar interface. The size of the Be-rich particles is limited by the beryllium supersaturation in the diffusional boundary layer. A numerical model was developed to investigate this solidification mechanism, and the results of the model are in good agreement with experimental observations of rapidly solidified Al-5 at.% Be

Organization of growing random networks

International Nuclear Information System (INIS)

Krapivsky, P. L.; Redner, S.

2001-01-01

The organizational development of growing random networks is investigated. These growing networks are built by adding nodes successively, and linking each to an earlier node of degree k with an attachment probability A k . When A k grows more slowly than linearly with k, the number of nodes with k links, N k (t), decays faster than a power law in k, while for A k growing faster than linearly in k, a single node emerges which connects to nearly all other nodes. When A k is asymptotically linear, N k (t)∼tk -ν , with ν dependent on details of the attachment probability, but in the range 2 -2 power-law tail, where s is the component size. The out component has a typical size of order lnt, and it provides basic insights into the genealogy of the network

Homogeneous (Cu, Ni)6Sn5 intermetallic compound joints rapidly formed in asymmetrical Ni/Sn/Cu system using ultrasound-induced transient liquid phase soldering process.

Science.gov (United States)

Li, Z L; Dong, H J; Song, X G; Zhao, H Y; Tian, H; Liu, J H; Feng, J C; Yan, J C

2018-04-01

Homogeneous (Cu, Ni) 6 Sn 5 intermetallic compound (IMC) joints were rapidly formed in asymmetrical Ni/Sn/Cu system by an ultrasound-induced transient liquid phase (TLP) soldering process. In the traditional TLP soldering process, the intermetallic joints formed in Ni/Sn/Cu system consisted of major (Cu, Ni) 6 Sn 5 and minor Cu 3 Sn IMCs, and the grain morphology of (Cu, Ni) 6 Sn 5 IMCs subsequently exhibited fine rounded, needlelike and coarse rounded shapes from the Ni side to the Cu side, which was highly in accordance with the Ni concentration gradient across the joints. However, in the ultrasound-induced TLP soldering process, the intermetallic joints formed in Ni/Sn/Cu system only consisted of the (Cu, Ni) 6 Sn 5 IMCs which exhibited an uniform grain morphology of rounded shape with a remarkably narrowed Ni concentration gradient. The ultrasound-induced homogeneous intermetallic joints exhibited higher shear strength (61.6 MPa) than the traditional heterogeneous intermetallic joints (49.8 MPa). Copyright © 2017 Elsevier B.V. All rights reserved.

Chemical leaching of rapidly solidified Al-Si binary alloys

International Nuclear Information System (INIS)

Yamauchi, I.; Takahara, K.; Tanaka, T.; Matsubara, K.

2005-01-01

Various particulate precursors of Al 100-x Si x (x = 5-12) alloys were prepared by a rapid solidification process. The rapidly solidified structures of the precursors were examined by XRD, DSC and SEM. Most of Si atoms were dissolved into the α-Al(fcc) phase by rapid solidification though the solubility of Si in the α-Al phase is negligibly small in conventional solidification. In the case of 5 at.% Si alloy, a single α-Al phase was only formed. The amount of the primary Si phase increased with increase of Si content for the alloys beyond 8 at.% Si. Rapid solidification was effective to form super-saturated α-Al precursors. These precursors were chemically leached by using a basic solution (NaOH) or a hydrochloric acid (HCl) solution. All Al atoms were removed by a HCl solution as well as a NaOH solution. Granules of the Si phase were newly formed during leaching. The specific surface area was about 50-70 m 2 /g independent of Si content. The leaching behavior in both solutions was slightly different. In the case of a NaOH solution, the shape of the precursor often degenerated after leaching. On the other hand, it was retained after leaching by a HCl solution. Fine Si particles precipitated in the α-Al phase by annealing of as-rapidly solidified precursors at 773 K for 7.2 x 10 3 s. In this case, it was difficult to obtain any products by NaOH leaching, but a few of Si particles were obtained by HCl leaching. Precipitated Si particles were dissolved by the NaOH solution. The X-ray diffraction patterns of leached specimens showed broad lines of the Si phase and its lattice constant was slightly larger than that of the pure Si phase. The microstructures of the leached specimens were examined by transmission electron microscopy. It showed that the leached specimens had a skeletal structure composed of slightly elongated particles of the Si phase and quite fine pores. The particle size was about 30-50 nm. It was of comparable order with that evaluated by Scherer

Rapid eye movement sleep behavior disorder

DEFF Research Database (Denmark)

Zoetmulder, Marielle; Jennum, Poul

2009-01-01

Rapid eye movement (REM) sleep behaviour disorder (RBD) is characterized by loss of REM sleep and related electromyographic atonia with marked muscular activity and dream enactment behaviour. RBD is seen in 0.5% of the population. It occurs in an idiopathic form and secondarily to medical...

P14.05 How far can they grow... - Two clinical examples

Science.gov (United States)

Espírito Santo, V.; Mendes, M.; Almendra, R.; Veiga, A.; Velon, A.; Guimarães, P.

2017-01-01

Abstract Introduction: Cerebral metastases are the most common form of central nervous system (CNS) tumours in adults. However, malignant neoplasm may also involve structures external to the brain, such as tissue surrounding the base of the skull, and then metastasize to the brain either by direct invasion or by spreading by the cranial nerves. CASE1: A 74 year-old man, with a past history of chronic kidney disease due to renal artery thrombosis and hypertension, was admitted in the emergency room (ER) complaining of persisting pain in the superior half of the right hemiface and frontal region, refractory to analgesia, with 2 months of evolution. He also referred diplopia in the right eye, homolateral hearing loss and asthenia. Neurological examination revealed psychomotor retardation, right VI cranial nerve paralysis, right sensorineural hypoacusis and dysphagia. Brain and neck MRI showed a lesion in right nasopharynx that invaded the bony structures of the base of the skull, in particular the petrous apex, clivus and great sphenoid wing. It also had an endocranial soft tissue component that occupied the cistern of Gasser’s ganglion. He was diagnosed with a nasopharynx malignant neoplasm. His clinical status deteriorated rapidly and he died 1 month later. CASE2: A 68 year-old woman, with a past history of left great sphenoid wing meningioma that was removed 2 years ago, was admitted in the ER complaining of tinnitus and hearing loss in the left ear and dizziness. Neurological examination revealed peripheral left facial paralysis, which the patient claims to have arisen shortly after the previous surgery and left conductive hypoacusis. Brain MRI showed a lesion in the left parotid gland that invaded the petrous bone, infiltrating the jugular foramen and carotid canal, causing deformation of these vascular structures. She was diagnosed with a parotid gland malignant neoplasm that slowly grow in the last 2 years. By this moment, she is still waiting for a

Characterization of tungsten silicides formed by rapid thermal annealing

International Nuclear Information System (INIS)

Siegal, M.; Santiago, J.J.; VanDerSpiegel, J.

1986-01-01

Tungsten silicide samples were formed by sputter depositing 80 nm W metal onto (100) oriented, 5 ohm-cm Si wafers. After deposition, the samples were fast radiatively processed in an RTA system using quartz-halogen tungsten lamps as radiation sources for time intervals ranging from 20 to 60s under high vacuum. Films processed at 22-25 W/cm 2 radiation with the film side of the samples oriented away from the lamps result in films which are metallic or cloudy in color, and have mixed composition as evidenced by x-ray diffraction (W, W 5 Si 3 and WSi 2 ). Films processed with the film side oriented toward the lamps show the occurrence of a phase transformation clearly nucleated at the film edge

Food Security Hotspots in India under Changing Climate and Growing Populatio

Science.gov (United States)

Singh, N.; Cherkauer, K. A.; Ashfaq, M.; Rastogi, D.

2015-12-01

Global climate change, unprecedented population growth, and rapid urbanization have elevated the possibility of food and water shortages in many regions across the world. The likelihood of such shortages in the future is further exacerbated by the fact that increased greenhouse forcing and rapid growth in human population will continue for at least the next several decades. These socio-environmental changes will likely put some regions under enormous economic and environmental stress by forcing them to adapt to new conditions. India with its rapidly growing population and high rates of urbanization and industrialization is one such region whose agricultural resources will be particularly vulnerable to the impact of these changes. This study collectively reviews and analyses the possible impacts of climate change, population growth and resulting land use change on the availability of food and water in the coming decades for India. By analyzing and fusing a wide variety of existing data and research on the impact of land use change, population, and climate change, on water and food resources this study develops an understanding of the broader implications of each of the changes on food security in the region. In addition, the study focuses on the need to assess and quantify the combination of such impacts at a regional level and identify food security hotspots spatially across India that will help to narrow down regions in the country which will be severely affected and need priority adaptation and mitigation measures.

High precision, rapid laser hole drilling

Science.gov (United States)

Chang, Jim J.; Friedman, Herbert W.; Comaskey, Brian J.

2013-04-02

A laser system produces a first laser beam for rapidly removing the bulk of material in an area to form a ragged hole. The laser system produces a second laser beam for accurately cleaning up the ragged hole so that the final hole has dimensions of high precision.

Protein synthesis in the growing rat lung

International Nuclear Information System (INIS)

Kelley, J.; Chrin, L.

1986-01-01

Developmental control of protein synthesis in the postnatal growth of the lung has not been systematically studied. In male Fischer 344 rats, lung growth continues linearly as a function of body weight (from 75 to 450 g body weight). To study total protein synthesis in lungs of growing rats, we used the technique of constant intravenous infusion of tritiated leucine, an essential amino acid. Lungs of sacrificed animals were used to determine the leucine incorporation rate into newly synthesized protein. The specific radioactivity of the leucine associated with tRNA extracted from the same lungs served as an absolute index of the precursor leucine pool used for lung protein synthesis. On the basis of these measurements, we were able to calculate the fractional synthesis rate (the proportion of total protein destroyed and replaced each day) of pulmonary proteins for each rat. Under the conditions of isotope infusion, leucyl-tRNA very rapidly equilibrates with free leucine of the plasma and of the extracellular space of the lung. Infusions lasting 30 minutes or less yielded linear rates of protein synthesis without evidence of contamination of lung proteins by newly labeled intravascular albumin. The fractional synthesis rate is considerably higher in juvenile animals (55% per day) than in adult rats (20% per day). After approximately 12 weeks of age, the fractional synthesis rate remains extremely constant in spite of continued slow growth of the lung. It is apparent from these data that in both young and adult rats the bulk of total protein synthesis is devoted to rapidly turning over proteins and that less than 4 percent of newly made protein is committed to tissue growth

The changing form of Antarctic biodiversity.

Science.gov (United States)

Chown, Steven L; Clarke, Andrew; Fraser, Ceridwen I; Cary, S Craig; Moon, Katherine L; McGeoch, Melodie A

2015-06-25

Antarctic biodiversity is much more extensive, ecologically diverse and biogeographically structured than previously thought. Understanding of how this diversity is distributed in marine and terrestrial systems, the mechanisms underlying its spatial variation, and the significance of the microbiota is growing rapidly. Broadly recognizable drivers of diversity variation include energy availability and historical refugia. The impacts of local human activities and global environmental change nonetheless pose challenges to the current and future understanding of Antarctic biodiversity. Life in the Antarctic and the Southern Ocean is surprisingly rich, and as much at risk from environmental change as it is elsewhere.

Variation in Orthologous Shell-Forming Proteins Contribute to Molluscan Shell Diversity.

Science.gov (United States)

Jackson, Daniel J; Reim, Laurin; Randow, Clemens; Cerveau, Nicolas; Degnan, Bernard M; Fleck, Claudia

2017-11-01

Despite the evolutionary success and ancient heritage of the molluscan shell, little is known about the molecular details of its formation, evolutionary origins, or the interactions between the material properties of the shell and its organic constituents. In contrast to this dearth of information, a growing collection of molluscan shell-forming proteomes and transcriptomes suggest they are comprised of both deeply conserved, and lineage specific elements. Analyses of these sequence data sets have suggested that mechanisms such as exon shuffling, gene co-option, and gene family expansion facilitated the rapid evolution of shell-forming proteomes and supported the diversification of this phylum specific structure. In order to further investigate and test these ideas we have examined the molecular features and spatial expression patterns of two shell-forming genes (Lustrin and ML1A2) and coupled these observations with materials properties measurements of shells from a group of closely related gastropods (abalone). We find that the prominent "GS" domain of Lustrin, a domain believed to confer elastomeric properties to the shell, varies significantly in length between the species we investigated. Furthermore, the spatial expression patterns of Lustrin and ML1A2 also vary significantly between species, suggesting that both protein architecture, and the regulation of spatial gene expression patterns, are important drivers of molluscan shell evolution. Variation in these molecular features might relate to certain materials properties of the shells of these species. These insights reveal an important and underappreciated source of variation within shell-forming proteomes that must contribute to the diversity of molluscan shell phenotypes. © The Author 2017. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution.

A University-Industry Collaborative Response to the Growing Global Demand for Student Talent: Using Interpretive Phenomenology to Discover Life-World Knowledge

Science.gov (United States)

Vauterin, Johanna Julia; Linnanen, Lassi; Michelsen, Karl-Erik

2013-01-01

The supply of student talent is now taking on an increasingly global dimension and this has extended the breadth of university-industry interaction. Set in the context of a rapidly growing international student market, knowledge transfer between academia and business through global student talent supply is an emerging practice. This paper…

Rapid prototyping using robot welding : process description

OpenAIRE

Ribeiro, António Fernando; Norrish, John

1997-01-01

Rapid Prototyping is a relatively recent technique to produce component prototypes for industry in a much shorter period of time, since the time to market a product is essential to its success. A new Rapid Prototyping process which uses metal as the raw material had been under development at Cranfield University in the last few years. The process uses a Gas Metal Arc fusion welding robot which deposits successive layers of metal in such way that it forms a 3D solid component. Firstly, a CAD s...

Fluffy dust forms icy planetesimals by static compression

Science.gov (United States)

Kataoka, Akimasa; Tanaka, Hidekazu; Okuzumi, Satoshi; Wada, Koji

2013-09-01

Context. Several barriers have been proposed in planetesimal formation theory: bouncing, fragmentation, and radial drift problems. Understanding the structure evolution of dust aggregates is a key in planetesimal formation. Dust grains become fluffy by coagulation in protoplanetary disks. However, once they are fluffy, they are not sufficiently compressed by collisional compression to form compact planetesimals. Aims: We aim to reveal the pathway of dust structure evolution from dust grains to compact planetesimals. Methods: Using the compressive strength formula, we analytically investigate how fluffy dust aggregates are compressed by static compression due to ram pressure of the disk gas and self-gravity of the aggregates in protoplanetary disks. Results: We reveal the pathway of the porosity evolution from dust grains via fluffy aggregates to form planetesimals, circumventing the barriers in planetesimal formation. The aggregates are compressed by the disk gas to a density of 10-3 g/cm3 in coagulation, which is more compact than is the case with collisional compression. Then, they are compressed more by self-gravity to 10-1 g/cm3 when the radius is 10 km. Although the gas compression decelerates the growth, the aggregates grow rapidly enough to avoid the radial drift barrier when the orbital radius is ≲6 AU in a typical disk. Conclusions: We propose a fluffy dust growth scenario from grains to planetesimals. It enables icy planetesimal formation in a wide range beyond the snowline in protoplanetary disks. This result proposes a concrete initial condition of planetesimals for the later stages of the planet formation.

Cochrane Rapid Reviews Methods Group to play a leading role in guiding the production of informed high-quality, timely research evidence syntheses.

Science.gov (United States)

Garritty, Chantelle; Stevens, Adrienne; Gartlehner, Gerald; King, Valerie; Kamel, Chris

2016-10-28

Policymakers and healthcare stakeholders are increasingly seeking evidence to inform the policymaking process, and often use existing or commissioned systematic reviews to inform decisions. However, the methodologies that make systematic reviews authoritative take time, typically 1 to 2 years to complete. Outside the traditional SR timeline, "rapid reviews" have emerged as an efficient tool to get evidence to decision-makers more quickly. However, the use of rapid reviews does present challenges. To date, there has been limited published empirical information about this approach to compiling evidence. Thus, it remains a poorly understood and ill-defined set of diverse methodologies with various labels. In recent years, the need to further explore rapid review methods, characteristics, and their use has been recognized by a growing network of healthcare researchers, policymakers, and organizations, several with ties to Cochrane, which is recognized as representing an international gold standard for high-quality, systematic reviews. In this commentary, we introduce the newly established Cochrane Rapid Reviews Methods Group developed to play a leading role in guiding the production of rapid reviews given they are increasingly employed as a research synthesis tool to support timely evidence-informed decision-making. We discuss how the group was formed and outline the group's structure and remit. We also discuss the need to establish a more robust evidence base for rapid reviews in the published literature, and the importance of promoting registration of rapid review protocols in an effort to promote efficiency and transparency in research. As with standard systematic reviews, the core principles of evidence-based synthesis should apply to rapid reviews in order to minimize bias to the extent possible. The Cochrane Rapid Reviews Methods Group will serve to establish a network of rapid review stakeholders and provide a forum for discussion and training. By facilitating

Do farmers rapidly adapt to past growing conditions by sowing different proportions of early and late maturing cereals and cultivars?

Directory of Open Access Journals (Sweden)

Pirjo Peltonen-Sainio

2013-10-01

Full Text Available In the short growing season of the northernmost European growing conditions, farmers are increasingly interested in expanding cultivation of later maturing crops at the expense of early maturing ones with lower yields. In this study we aimed to assess how the switching between spring cereals that differ in earliness was associated with different external factors. This was tested using unique datasets for regional cropping areas and cultivar use for the last 15 years. Early maturing barley was favored at the expense of later maturing wheat when a high number of days to crop maturity was required in the preceding year. In contrast, farmers reduced the barley area when a high number of cumulated degree days was required for a crop to mature in the previous year. A shift was recorded from early to late maturing cultivars. This study indicated that despite limited opportunities for farmers to alter land use, they readily responded to past conditions and used the knowledge gained for decision-making to reduce risk. This is a valuable operative model for studying adaptation to opportunities and constraints induced by climate change.

Monitoring Annual Urban Changes in a Rapidly Growing Portion of Northwest Arkansas with a 20-Year Landsat Record

Directory of Open Access Journals (Sweden)

Ryan Reynolds

2017-01-01

Full Text Available Northwest Arkansas has undergone a significant urban transformation in the past several decades and is considered to be one of the fastest growing regions in the United States. The urban area expansion and the associated demographic increases bring unprecedented pressure to the environment and natural resources. To better understand the consequences of urbanization, accurate and long-term depiction on urban dynamics is critical. Although urban mapping activities using remote sensing have been widely conducted, long-term urban growth mapping at an annual pace is rare and the low accuracy of change detection remains a challenge. In this study, a time series Landsat stack covering the period from 1995 to 2015 was employed to detect the urban dynamics in Northwest Arkansas via a two-stage classification approach. A set of spectral indices that have been proven to be useful in urban area extraction together with the original Landsat spectral bands were used in the maximum likelihood classifier and random forest classifier to distinguish urban from non-urban pixels for each year. A temporal trajectory polishing method, involving temporal filtering and heuristic reasoning, was then applied to the sequence of classified urban maps for further improvement. Based on a set of validation samples selected for five distinct years, the average overall accuracy of the final polished maps was 91%, which improved the preliminary classifications by over 10%. Moreover, results from this study also indicated that the temporal trajectory polishing method was most effective with initial low accuracy classifications. The resulting urban dynamic map is expected to provide unprecedented details about the area, spatial configuration, and growing trends of urban land-cover in Northwest Arkansas.

Growing Pebbles and Conceptual Prisms - Understanding the Source of Student Misconceptions about Rock Formation.

Science.gov (United States)

Kusnick, Judi

2002-01-01

Analyzes narrative essays--stories of rock formation--written by pre-service elementary school teachers. Reports startling misconceptions among preservice teachers on pebbles that grow, human involvement in rock formation, and sedimentary rocks forming as puddles as dry up, even though these students had completed a college level course on Earth…

Rapidly enlarging neck mass in a neonate causing airway compromise

OpenAIRE

Schmidt, Kyra; Leal, Andres; McGill, Thomas; Jacob, Roy

2016-01-01

Up to 20% of all congenital pediatric head and neck masses are branchial cleft cysts. Second branchial cleft cysts account for 95% of branchial anomalies, and fourth branchial cleft cysts are the rarest type. Their typical presentations include non–life-threatening symptoms, such as drainage, skin irritations, minor swelling, and tenderness. We describe a 5-week-old neonate with increasing stridor secondary to a rapidly growing neck mass. Imaging and surgical excision confirmed the mass to be...

Lost mold-rapid infiltration forming: Strength control in mesoscale 3Y-TZP ceramics

Science.gov (United States)

Antolino, Nicholas E.

The strength of nanoparticulate enabled microdevices and components is directly related to the interfacial control between particles and the flaws introduced as these particles come together to form the device or component. One new application for micro-scale or meso-scale (10's microm to 100's microm) devices is surgical instruments designed to enter the body, perform a host of surgeries within the body cavity, and be extracted with no external incisions to the patient. This new concept in surgery, called natural orifice transluminal endoscopic surgery (NOTES), requires smaller and more functional surgical tools. Conventional processing routes do not exist for making these instruments with the desired size, topology, precision, and strength. A process, called lost mold-rapid infiltration forming (LM-RIF), was developed to satisfy this need. A tetragonally stabilized zirconia polycrystalline material (3Y-TZP) is a candidate material for this process and application because of its high strength, chemical stability, high elastic modulus, and reasonably high toughness for a ceramic. Modern technical ceramics, like Y-TZP, are predicated on dense, fine grained microstructures and functional mesoscale devices must also adhere to this standard. Colloid and interfacial chemistry was used to disperse and concentrate the Y-TZP nanoparticles through a very steep, yet localized, potential energy barrier against the van der Waals attractive force. The interparticle interaction energies were modeled and compared to rheological data on the suspension. At high concentrations, the suspension was pseudoplastic, which is evidence that a structure was formed within the suspension that could be disrupted by a shearing force. The LM-RIF process exploits this rheological behavior to fill mold cavities created by photolithography. The premise of the LM-RIF process is to process the particulate material into a dense ceramic body while the unsintered mesoscale parts are supported en masse

Growing Galaxies Gently

Science.gov (United States)

2010-10-01

New observations from ESO's Very Large Telescope have, for the first time, provided direct evidence that young galaxies can grow by sucking in the cool gas around them and using it as fuel for the formation of many new stars. In the first few billion years after the Big Bang the mass of a typical galaxy increased dramatically and understanding why this happened is one of the hottest problems in modern astrophysics. The results appear in the 14 October issue of the journal Nature. The first galaxies formed well before the Universe was one billion years old and were much smaller than the giant systems - including the Milky Way - that we see today. So somehow the average galaxy size has increased as the Universe has evolved. Galaxies often collide and then merge to form larger systems and this process is certainly an important growth mechanism. However, an additional, gentler way has been proposed. A European team of astronomers has used ESO's Very Large Telescope to test this very different idea - that young galaxies can also grow by sucking in cool streams of the hydrogen and helium gas that filled the early Universe and forming new stars from this primitive material. Just as a commercial company can expand either by merging with other companies, or by hiring more staff, young galaxies could perhaps also grow in two different ways - by merging with other galaxies or by accreting material. The team leader, Giovanni Cresci (Osservatorio Astrofisico di Arcetri) says: "The new results from the VLT are the first direct evidence that the accretion of pristine gas really happened and was enough to fuel vigorous star formation and the growth of massive galaxies in the young Universe." The discovery will have a major impact on our understanding of the evolution of the Universe from the Big Bang to the present day. Theories of galaxy formation and evolution may have to be re-written. The group began by selecting three very distant galaxies to see if they could find evidence

Africa: rapid population increase retards development.

Science.gov (United States)

1993-10-01

The Organization of African Unity (OAU), the African Development Bank (ADB) and the UN Economic Commission for Africa (ECA) have criticized African governments for not taking the problem of unchecked population growth seriously enough. "Until recently most African governments did not view rapid population growth as a matter for concern," said the OAU assistant secretary-general for political affairs, Machivenyika Mapuranga, at a seminar on 'population and development'. The OAU estimates that an annual average population increase of 3.1% far outstrips Africa's economic growth, which in 1992 was less than 1%. Mapuranga acknowledged that cutting the population increase is an uphill struggle, especially among rural communities. African agriculture is largely labor intensive, sustained by smallholders, which encourages farmers to have more children. Like other wage earners, African farmers look to support from their family when they grow old and, for that reason, the number of children also counts. But with agricultural production growing at an average annual rate of 2.5%, self-sufficiency in food remains an elusive goal. Cities in sub-Saharan Africa are growing much faster than the overall rate of population increase of 3.1% per year. Between 1980 and 1988 the region's urban population increased at the rate of 6.9% a year. Urban areas now account for nearly 30% of the sub-Saharan Africa population, currently put at 680 million. By 2025, approximately 700 million people are expected to live in urban areas. Despite migration to towns, the rural population is expected to rise more than 68%, reaching over 590 million. full text

Cheap heat grows in fields

International Nuclear Information System (INIS)

Haluza, I.

2006-01-01

Slovak farmers resemble the peasants from the film T he Magnificent Seven . They keep complaining about their fate but consider any innovation as an interference. And that is why they still have not started growing fast-growing wood although the number of heating plants processing bio-mass from forests and fields is growing. Natural gas is expensive and coal creates pollution. Energy from biomass is becoming a good business and also creates new business opportunities - growing the raw material it needs. Such heating plants usually use waste from wood processing companies and Slovak Forests (Lesy SR) has also started deliveries of chip wood from old forests. There are plantations of fast growing wood suitable for heat production of over 500-thousand hectares throughout the EU. This is about 10% of Slovakian's area where the first plantations are also already being set up. The first promising plantation project was launched this spring. And this is not a project launched and backed by a big company but a starting up businessman, Miroslav Forgac from Kosice. He founded his company, Forgim, last winter. Without big money involved and thank to a new business idea he managed to persuade farmers to set up the first plantations. He supplied the seedlings and the business has started with 75 ha of plantations around Trnava, Sala, Komarno, Lucenec, Poprad and Kosice. He is gradually signing contracts with other landowners and next year the area of plantations is set to grow by 1500 ha. Plantations of fast growing trees such as willow, poplar and acacia regenerate by new trees growing out of the roots of the old and from cut trees so from one seedling and one investment there can be several harvests. Swedish willows from Forgim regenerate 20 to 25 years after the first planting. And only then new seedlings have to be purchased. Using special machines that even cut the wood to wood chips the plantations can be 'harvested' every three years. Unlike crops, the fields do not

A Latent Class Approach to Examining Forms of Peer Victimization

Science.gov (United States)

Bradshaw, Catherine P.; Waasdorp, Tracy E.; O'Brennan, Lindsey M.

2013-01-01

There is growing interest in gender differences in the experience of various forms of peer victimization; however, much of the work to date has used traditional variable-centered approaches by focusing on scales or individual forms of victimization in isolation. The current study explored whether there were discrete groups of adolescents who…

Prevention and Care Programs Addressing the Growing Prevalence of Diabetes in China.

Science.gov (United States)

Yin, Junmei; Kong, Alice P S; Chan, Juliana C N

2016-12-01

According to a 2010 national survey, 11 % of adults in China have diabetes, affecting 109.6 million individuals. The high prevalence of diabetes has been attributed to the aging of the population, the rapid adoption of energy-dense foods, and a reduction in physical activity. Collectively, these secular changes have created an obesogenic environment that can unmask diabetes in subjects with a genetic predisposition. The growing prevalence of maternal obesity, gestational diabetes, childhood obesity, and early-onset disease can lead to premature morbidity and mortality. Rising to meet these public health challenges, researchers in China have conducted randomized studies to demonstrate the benefits of lifestyle modification in preventing diabetes (the Da Qing Study), as well as that of team-based integrated care, using multiple strategies including peer support and information technology, in order to reduce hospitalizations, cardiovascular-renal complications, and premature deaths. With growing evidence supporting the benefits of these diabetes prevention and management programs, the next challenge is to use policies and systems to scale up the implementation of these programs through raising awareness, building capacity, and providing resources to reduce the human and socioeconomic burden of diabetes.

Utilizing Rapid Prototyping for Architectural Modeling

Science.gov (United States)

Kirton, E. F.; Lavoie, S. D.

2006-01-01

This paper will discuss our approach to, success with and future direction in rapid prototyping for architectural modeling. The premise that this emerging technology has broad and exciting applications in the building design and construction industry will be supported by visual and physical evidence. This evidence will be presented in the form of…

Growing container seedlings: Three considerations

Science.gov (United States)

Kas Dumroese; Thomas D. Landis

2015-01-01

The science of growing reforestation and conservation plants in containers has continually evolved, and three simple observations may greatly improve seedling quality. First, retaining stock in its original container for more than one growing season should be avoided. Second, strongly taprooted species now being grown as bareroot stock may be good candidates...

Rapid, all dry microfabrication of three-dimensional Co3O4/Pt nanonetworks for high-performance microsupercapacitors.

Science.gov (United States)

Ma, Xinyu; Feng, Shuxuan; He, Liang; Yan, Mengyu; Tian, Xiaocong; Li, Yanxi; Tang, Chunjuan; Hong, Xufeng; Mai, Liqiang

2017-08-17

On-chip electrochemical energy storage devices have attracted growing attention due to the decreasing size of electronic devices. Various approaches have been applied for constructing the microsupercapacitors. However, the microfabrication of high-performance microsupercapacitors by conventional and fully compatible semiconductor microfabrication technologies is still a critical challenge. Herein, unique three-dimensional (3D) Co 3 O 4 nanonetwork microelectrodes formed by the interconnection of Co 3 O 4 nanosheets are constructed by controllable physical vapor deposition combined with rapid thermal annealing. This construction process is an all dry and rapid (≤5 minutes) procedure. Afterward, by sputtering highly electrically conductive Pt nanoparticles on the microelectrodes, the 3D Co 3 O 4 /Pt nanonetworks based microsupercapacitor is fabricated, showing a high volume capacitance (35.7 F cm -3 ) at a scan rate of 20 mV s -1 due to the unique interconnected structures, high electrical conductivity and high surface area of the microelectrodes. This microfabrication process is also used to construct high-performance flexible microsupercapacitors, and it can be applied in the construction of wearable devices. The proposed strategy is completely compatible with the current semiconductor microfabrication and shows great potential in the applications of the large-scale integration of micro/nano and wearable devices.

Gas industry construction expenditures to grow rapidly

International Nuclear Information System (INIS)

Quarles, W.R.

1991-01-01

Between 1991 and 1993, the natural gas industry will invest $28.297 billion to install additional facilities for natural gas production and storage, transmission, underground storage, gas distribution and for other general expenditures, estimates the American Gas Association as shown in the 1990 Gas Facts. This is a 38% investment increase from the forecasts in the 1989 Gas Facts. This issue forecasts investments of $13.303 billion for 1991 and $18.396 billion for 1992. This issue does not include investments for 1993. In 1989, (the last figures released) the gas industry invested $7,341 billion for new transmission lines, distribution mains, underground storage, production and storage and general facilities. Included in the 1989 expenditures are: $3.980 billion in distribution facilities; $2.081 billion in gas transmission systems and $159 million in underground storage facilities. Investment in new distribution facilities in 1991 and $4.550 billion in 1993. This is a steady increase for these three years. Investments in natural gas transmission facilities show a steady increase also. In 1991, pipe line operating companies will invest $9.391 billion for new facilities, $9.005 in 1992 and $9.901 billion in 1993

Thin film growing by the laser ablation technique: possibilities for growing of dosimetric materials

International Nuclear Information System (INIS)

Rojas R, E.M.; Melo M, M.; Enriquez Z, E.; Fernandez G, M.; Haro P, E.; Hernandez P, J.L.

2005-01-01

In this talk we will present the basics about the laser ablation technique and how it is used for thin film growing, either as a single film or a stack of thin films, as well as some methods to characterize in real time the film thickness. Finally, we will discuss the possibilities of using laser ablation for growing thin films with applications to dosimetry. (Author)

Phenolic carbonyls undergo rapid aqueous photodegradation to form low-volatility, light-absorbing products

Science.gov (United States)

Smith, Jeremy D.; Kinney, Haley; Anastasio, Cort

2016-02-01

We investigated the aqueous photochemistry of six phenolic carbonyls - vanillin, acetovanillone, guaiacyl acetone, syringaldehyde, acetosyringone, and coniferyl aldehyde - that are emitted from wood combustion. The phenolic carbonyls absorb significant amounts of solar radiation and decay rapidly via direct photodegradation, with lifetimes (τ) of 13-140 min under Davis, CA winter solstice sunlight at midday (solar zenith angle = 62°). The one exception is guaiacyl acetone, where the carbonyl group is not directly connected to the aromatic ring: This species absorbs very little sunlight and undergoes direct photodegradation very slowly (τ > 103 min). We also found that the triplet excited states (3C*) of the phenolic carbonyls rapidly oxidize syringol (a methoxyphenol without a carbonyl group), on timescales of 1-5 h for solutions containing 5 μM phenolic carbonyl. The direct photodegradation of the phenolic carbonyls, and the oxidation of syringol by 3C*, both efficiently produce low volatility products, with SOA mass yields ranging from 80 to 140%. Contrary to most aliphatic carbonyls, under typical fog conditions we find that the primary sink for the aromatic phenolic carbonyls is direct photodegradation in the aqueous phase. In areas of significant wood combustion, phenolic carbonyls appear to be small but significant sources of aqueous SOA: over the course of a few hours, nearly all of the phenolic carbonyls will be converted to SOA via direct photodegradation, enhancing the POA mass from wood combustion by approximately 3-5%.

Structure of rapidity divergences in multi-parton scattering soft factors

Science.gov (United States)

Vladimirov, Alexey

2018-04-01

We discuss the structure of rapidity divergences that are presented in the soft factors of transverse momentum dependent (TMD) factorization theorems. To provide the discussion on the most general level we consider soft factors for multi-parton scattering. We show that the rapidity divergences are result of the gluon exchanges with the distant transverse plane, and are structurally equivalent to the ultraviolet divergences. It allows to formulate and to prove the renormalization theorem for rapidity divergences. The proof is made with the help the conformal transformation which maps rapidity divergences to ultraviolet divergences. The theorem is the systematic form of the factorization of rapidity divergences, which is required for the definition of TMD parton distributions. In particular, the definition of multi parton distributions is presented. The equivalence of ultraviolet and rapidity divergences leads to the exact relation between soft and rapidity anomalous dimensions. Using this relation we derive the rapidity anomalous dimension at the three-loop order.

Rhizobia symbiosis of seven leguminous species growing along Xindian riverbank of Northern Taiwan

Directory of Open Access Journals (Sweden)

Cheng-Tai Huang

2018-01-01

Full Text Available Legume-rhizobia symbioses of seven leguminous species growing along Xindian riverbank of Northern Taiwan were investigated in this study. These legumes form either determinate or indeterminate types of root nodules. The determinate nodules of Alysicarpus vaginalis, Desmodium. triflorum, D. heterophyllum, Sesbania cannabina and the indeterminate nodules of Mimosa pudica harbored bacteroids of morphological uniformity (length of 1-3 μm, while the indeterminate nodules of Crotalaria zanzibarica and Trifolium repens contained bacteroids of highly pleomorphism (size varying from 1 to 5 μm. The enclosed bacteria were isolated from respective nodules, and twenty slow-growing and nine fast-growing rhizobial isolates were recovered. The slow-growing isolates were classified to the genus Bradyrhizobium based on the 16S rRNA sequences, whereas the fast-growing rhizobia comprise four genera, Neorhizobium, Rhizobium, Cupriavidus and Paraburkholderia. Results of stable isotope analyses revealed that the seven leguminous species had similar and consistently negative δ15N values in leaves (mean of -1.2 ‰, whereas the values were positive (varying from 3.7 to 7.3 ‰ in the nodules. These values were significantly higher in the indeterminate nodules than those in the determinate ones. In addition, variations in the values of leaf δ13C (varying from -29 to -34‰ among the seven legumes were measured, indicating their photosynthetic water use efficiencies were different. This is the first field survey to report the rhizobial diversity and the nutrient relationships of sympatric legume in Taiwan.

The formation and growing properties of poly(ethylene terephthalate) fiber growing media after thermo-oxidative treatment

International Nuclear Information System (INIS)

Chang, C.P.; Lin, S.M.

2007-01-01

This research uses three kinds of recycled synthetic fibers that all possess excellent thermal plasticity property as raw material to develop a new firm cultivation media: polyethylene terephthalate, polyamide and polypropylene. One can not only freely control plants cultivation growing condition by changing bulk density of the media, but also solve disposal problem after usage by applying thermal oxidative treatment during manufacturing processes. The water content, air permeability and formation conditions of these fiber growing media that are required in plants growing habitat were discussed, and compared the fallout with rockwool (RW) growing media that is commonly used at present days. The results indicated that the polyethylene terephthalate fiber media could attain best formation characteristics among these fibers at the same bulk density range. Furthermore, the fiber media that were thermo-oxidative treated at 240-260 deg. C could obtained above 90% total porosity, 23-49% air capacity and 48-68% water availability, water contents raised from 1735-1094 to 2145-1156% under bulk densities of 0.03-0.09 g/cm 3 , which conforms to the common plant growing habitat conditions. Its performance well surpasses the rockwool growing media. We also discovered that the thermo-oxidative treated polyethylene terephthalate (PET) fiber media could be easily broken down and become powdery by exerting pressure, thus greatly reduce its volume and effectively improve disposal processes that are difficult presently for the huge refuse create by rockwool

High Symbiont Relatedness Stabilizes Mutualistic Cooperation in Fungus-Growing Termites

DEFF Research Database (Denmark)

Aanen, Duur K; de Fine Licht, Henrik H; Debets, Alfons J M

2009-01-01

It is unclear how mutualistic relationships can be stable when partners disperse freely and have the possibility of forming associations with many alternative genotypes. Theory predicts that high symbiont relatedness should resolve this problem, but the mechanisms to enforce this have rarely been...... of spore production in proportion to strain frequency. This positive reinforcement results in an exclusive lifetime association of each host colony with a single fungal symbiont and hinders the evolution of cheating. Our findings explain why vertical symbiont transmission in fungus-growing termites is rare...

Physico-Chemical-Managed Killing of Penicillin-Resistant Static and Growing Gram-Positive and Gram-Negative Vegetative Bacteria

Science.gov (United States)

Richmond, Robert Chaffee (Inventor); Schramm, Jr., Harry F. (Inventor); Defalco, Francis G. (Inventor); Farris, III, Alex F. (Inventor)

2012-01-01

Systems and methods for the use of compounds from the Hofmeister series coupled with specific pH and temperature to provide rapid physico-chemical-managed killing of penicillin-resistant static and growing Gram-positive and Gram-negative vegetative bacteria. The systems and methods represent the more general physico-chemical enhancement of susceptibility for a wide range of pathological macromolecular targets to clinical management by establishing the reactivity of those targets to topically applied drugs or anti-toxins.

On being a scientist in a rapidly changing world.

Science.gov (United States)

Mandel, I D

1996-02-01

The practice of biological science has changed dramatically since mid-century, reshaped not only by a rapid series of landmark discoveries, but also by governmental directives, institutional policies, and public attitudes. Until 1964, the major influences were the mentor, who provided direction and indoctrination into the culture of science, and in dentistry, the newly established NIDR, which fueled the research engine with an expanding research and training program. The 1965-74 period witnessed the advent of the Institutional Review Board, an increased social involvement of biological scientists, and a recognition of the need for biological and physical safeguards in the conduct of research. The most turbulent years were 1975-89, when there was a confluence of animal rights activism and regulation, growing concerns with scientific fraud and publication malpractice, and the stresses and strains (and opportunities) resulting from the rapid expansion of the academic-industrial complex. The current period is characterized by rapid pace, high volume, and an increased depth and breadth of knowledge-a major change in scale in the conduct of science. It is an exciting time but one in which ethical issues are multiplying. Attention must be paid.

Brain Matters: Practicing Religion, Forming the Faithful

Science.gov (United States)

Hogue, David A.

2012-01-01

Religious practices have long drawn on the social sciences to broaden our understanding of how human beings develop, learn, relate, and are formed. While the religion and science conversations have not always been friendly, a growing number of theologians and scientists are engaged in promising dialogues where the interests of both parties…

Growing Oppression, Growing Resistance : LGBT Activism and Europeanisation in Macedonia

NARCIS (Netherlands)

Miškovska Kajevska, A.; Bilić, B.

2016-01-01

This chapter provides one of the first socio-historical overviews of the LGBT groups in Macedonia and argues that an important impetus for the proliferation of LGBT activities has been the growing state-endorsed homophobia starting from 2008. The homophobic rhetoric of the ruling parties was clearly

How Your Fetus Grows During Pregnancy

Science.gov (United States)

... Patients About ACOG How Your Fetus Grows During Pregnancy Home For Patients Search FAQs How Your Fetus ... 2018 PDF Format How Your Fetus Grows During Pregnancy Pregnancy How does pregnancy begin? What is the ...

The precipitation, growth and stability of mercury sulfide nanoparticles formed in the presence of marine dissolved organic matter.

Science.gov (United States)

Mazrui, Nashaat M; Seelen, Emily; King'ondu, Cecil K; Thota, Sravan; Awino, Joseph; Rouge, Jessica; Zhao, Jing; Mason, Robert P

2018-04-25

The methylation of mercury is known to depend on the chemical forms of mercury (Hg) present in the environment and the methylating bacterial activity. In sulfidic sediments, under conditions of supersaturation with respect to metacinnabar, recent research has shown that mercury precipitates as β-HgS(s) nanoparticles (β-HgS(s)nano). Few studies have examined the precipitation of β-HgS(s)nano in the presence of marine dissolved organic matter (DOM). In this work, we used dynamic light scattering (DLS) coupled with UV-Vis spectroscopy and transmission electron microscopy (TEM) to investigate the formation and fate of β-HgS(s)nano formed in association with marine DOM extracted from the east and west of Long Island Sound, and at the shelf break of the North Atlantic Ocean, as well as with low molecular weight thiols. We found that while the β-HgS(s)nano formed in the presence of oceanic DOM doubled in size after 5 weeks, those forming in solutions with coastal DOM did not grow over time. In addition, when the HgII : DOM ratio was varied, β-HgS(s)nano only rapidly aggregated at high ratios (>41 μmol HgII per mg C) where the concentration of thiol groups was determined to be substantially low relative to HgII. This suggests that functional groups other than thiols could be involved in the stabilization of β-HgS(s)nano. Furthermore, we showed that β-HgS(s)nano forming under anoxic conditions remained stable and could therefore persist in the environment sufficiently to impact the methylation potential. Exposure of β-HgS(s)nano to sunlit and oxic environments, however, caused rapid aggregation and sedimentation of the nanoparticles, suggesting that photo-induced changes or oxidation of organic matter adsorbed on the surface of β-HgS(s)nano affected their stability in surface waters.

Microsatellite primers for fungus-growing ants

DEFF Research Database (Denmark)

Villesen, Palle; Gertsch, P J; Boomsma, JJ

2002-01-01

We isolated five polymorphic microsatellite loci from a library of two thousand recombinant clones of two fungus-growing ant species, Cyphomyrmex longiscapus and Trachymyrmex cf. zeteki. Amplification and heterozygosity were tested in five species of higher attine ants using both the newly...... developed primers and earlier published primers that were developed for fungus-growing ants. A total of 20 variable microsatellite loci, developed for six different species of fungus-growing ants, are now available for studying the population genetics and colony kin-structure of these ants....

Microsatellite Primers for Fungus-Growing Ants

DEFF Research Database (Denmark)

Villesen Fredsted, Palle; Gertsch, Pia J.; Boomsma, Jacobus Jan (Koos)

2002-01-01

We isolated five polymorphic microsatellite loci from a library of two thousand recombinant clones of two fungus-growing ant species, Cyphomyrmex longiscapus and Trachymyrmex cf. zeteki. Amplification and heterozygosity were tested in five species of higher attine ants using both the newly...... developed primers and earlier published primers that were developed for fungus-growing ants. A total of 20 variable microsatellite loci, developed for six different species of fungus-growing ants, are now available for studying the population genetics and colony kin-structure of these ants....

Growth form and seasonal variation in leaf gas exchange of Colophospermum mopane savanna trees in northwest Botswana.

Science.gov (United States)

Veenendaal, Elmar M; Mantlana, Khanyisa B; Pammenter, Norman W; Weber, Piet; Huntsman-Mapila, Phillipa; Lloyd, Jon

2008-03-01

We investigated differences in physiological and morphological traits between the tall and short forms of mopane (Colophospermum mopane (Kirk ex Benth.) Kirk ex J. Léonard) trees growing near Maun, Botswana on a Kalahari sandveld overlying an impermeable calcrete duricrust. We sought to determine if differences between the two physiognomic types are attributable to the way they exploit available soil water. The tall form, which was located on deeper soil than the short form (5.5 versus 1.6 m), had a lower leaf:fine root biomass ratio (1:20 versus 1:6), but a similar leaf area index (0.9-1.0). Leaf nitrogen concentrations varied between 18 and 27 mg g(-1) and were about 20% higher in the tall form than in the short form. Maximum net assimilation rates (A sat) occurred during the rainy seasons (March-April 2000 and January-February 2001) and were similar in the tall and short forms (15-22 micromol m(-2) s(-1)) before declining to less than 10 micromol m(-2) s(-1) at the end of the rainy season in late April. As the dry season progressed, A sat, soil water content, predawn leaf water potential (Psi pd) and leaf nitrogen concentration declined rapidly. Before leaf abscission, Psi pd was more negative in the short form (-3.4 MPa) than in the tall form (-2.7 MPa) despite the greater availability of soil water beneath the short form trees. This difference appeared attributable to differences in root depth and density between the physiognomic types. Stomatal regulation of water use and carbon assimilation differed between years, with the tall form having a consistently more conservative water-use strategy as the dry season progressed than the short form.

The Mechanism Forming the Cell Surface of Tip-Growing Rooting Cells Is Conserved among Land Plants.

Science.gov (United States)

Honkanen, Suvi; Jones, Victor A S; Morieri, Giulia; Champion, Clement; Hetherington, Alexander J; Kelly, Steve; Proust, Hélène; Saint-Marcoux, Denis; Prescott, Helen; Dolan, Liam

2016-12-05

To discover mechanisms that controlled the growth of the rooting system in the earliest land plants, we identified genes that control the development of rhizoids in the liverwort Marchantia polymorpha. 336,000 T-DNA transformed lines were screened for mutants with defects in rhizoid growth, and a de novo genome assembly was generated to identify the mutant genes. We report the identification of 33 genes required for rhizoid growth, of which 6 had not previously been functionally characterized in green plants. We demonstrate that members of the same orthogroup are active in cell wall synthesis, cell wall integrity sensing, and vesicle trafficking during M. polymorpha rhizoid and Arabidopsis thaliana root hair growth. This indicates that the mechanism for constructing the cell surface of tip-growing rooting cells is conserved among land plants and was active in the earliest land plants that existed sometime more than 470 million years ago [1, 2]. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Rapid formation of large dust grains in the luminous supernova 2010jl.

Science.gov (United States)

Gall, Christa; Hjorth, Jens; Watson, Darach; Dwek, Eli; Maund, Justyn R; Fox, Ori; Leloudas, Giorgos; Malesani, Daniele; Day-Jones, Avril C

2014-07-17

The origin of dust in galaxies is still a mystery. The majority of the refractory elements are produced in supernova explosions, but it is unclear how and where dust grains condense and grow, and how they avoid destruction in the harsh environments of star-forming galaxies. The recent detection of 0.1 to 0.5 solar masses of dust in nearby supernova remnants suggests in situ dust formation, while other observations reveal very little dust in supernovae in the first few years after explosion. Observations of the spectral evolution of the bright SN 2010jl have been interpreted as pre-existing dust, dust formation or no dust at all. Here we report the rapid (40 to 240 days) formation of dust in its dense circumstellar medium. The wavelength-dependent extinction of this dust reveals the presence of very large (exceeding one micrometre) grains, which resist destruction. At later times (500 to 900 days), the near-infrared thermal emission shows an accelerated growth in dust mass, marking the transition of the dust source from the circumstellar medium to the ejecta. This provides the link between the early and late dust mass evolution in supernovae with dense circumstellar media.

Comparison of hydrogen-production capability of four different Enterobacteriaceae strains under growing and non-growing conditions

Energy Technology Data Exchange (ETDEWEB)

Seol, Eunhee; Kim, Seohyoung; Raj, S. Mohan; Park, Sunghoon [Department of Chemical and Biochemical Engineering, Pusan National University, Busan 609-735 (Korea)

2008-10-15

Non-growing cells can function as whole-cell biocatalysts for hydrogen (H{sub 2}) production, a process that has recently drawn much attention. In order to evaluate their potential as whole-cell biocatalysts, we compared the H{sub 2}-production capability of four Enterobacteriaceae strains (Citrobacter amalonaticus Y19, Escherichia coli K-12 MG1655, Escherichia coli DJT135, and Enterobacter aerogenes) under growing and non-growing conditions. We evaluated their H{sub 2}-production activity at varying temperatures (25-45 C) and pH conditions (6.0-8.0) using glucose or formate as the carbon source. Under growing conditions with 10 mM glucose as a substrate, E. aerogenes exhibited the highest H{sub 2}-production activity (17.0 {+-} 0.2 {mu}mol H{sub 2} mg cell{sup -1} h{sup -1}) among the four strains, but the final H{sub 2} yield was similar (1.7-1.8 mol H{sub 2} mol{sup -1} glucose) in all four strains. H{sub 2} production in the four strains proceeded through a formate-dependent pathway that involved the formate hydrogen lyase (FHL) complex. Under non-growing conditions with 20 mM formate as a substrate, we obtained high H{sub 2}-production activities, in the range of 95.5-195.2 {mu}mol H{sub 2} mg cell{sup -1} h{sup -1}, with E. coli DJT135 exhibiting the highest activity (195.2 {mu}mol H{sub 2} mg{sup -1} h{sup -1}) at pH 6.0 and 45 C. In contrast, using glucose as the carbon substrate in non-growing cell experiments greatly reduced the H{sub 2}-production activity to 6.1-7.7 {mu}mol H{sub 2} mg cell{sup -1} h{sup -1}. This study indicated that formate is a better substrate than glucose for H{sub 2} production by non-growing cells, and that the H{sub 2}-production performance among the strains did not vary significantly, with the exception of E. coli K-12 MG1655. (author)

L'authentification rapide des poulets de chair sous label: distinction entre poulets issus de souches à croissance lente ou rapide par la spectrometrie dans le proche infrarouge. Analytical methods for the authentification of agro-food products. Gembloux (Belgium. 20 Oct 1999

Directory of Open Access Journals (Sweden)

Fumiere O.

2000-01-01

Full Text Available Rapid authentification of certified chicken meat: distinguishing slow and fast growing chicken strains using near infrared reflectance spectroscopy. Chicken meat market is characterized by numerous quality marks in Belgium and in Europe: ""Label de Qualite Wallon"" in Belgium, ""Label Rouge"" in France, Labels for geographical origin, organic agriculture, ... The authors have already tested, Near Infrared Reflectance Spectroscopy (NIRS to authenticate slow growing chicken meats. Their study was extended on a larger set and takes account of special labelling according to European regulation 91/1538/CEE. Our results show that the technique could be integrated in an analytical system of surveillance of slow-growing chicken meat products with quality mark.

A metastable Mg11Sm phase obtained by rapid solidification

International Nuclear Information System (INIS)

Budurov, S.

1993-01-01

Molten Mg-Sm alloys with a Sm concentration of 4.93, 6.86, and 8.35 at.% were rapidly soldified with the aid of a shock wave gun device. Investigations of the obtained splats were performed with the aid of DSC, X-ray analysis, and metallography. Rapid soldification of the eutectic MgSm 8.35 alloy forms a new Im3m-type phase. (orig.)

AN ANALYSIS OF THE RAPID GROWTH FACTORS PRESENTED IN THE LITERATURE OF THE FIELD

Directory of Open Access Journals (Sweden)

ALB MARIA

2015-03-01

Full Text Available This paper presents the main rapid growth factors, as encountered in literature and discusses the importance and contribution of these factors in achieving the rapid growth, respectively if this growth phenomenon may be achieved in the absence of the aforesaid factors. The paper examines the factors and subfactors considered or found by scholars to have an effect on or be in connection with the rapid growth. A comparative analysis was performed on several studies concerning the rapid growth companies. Among the main factors influencing the rapid growth are those related to the human resources management, the entrepreneur characteritics and the characteristics of the business. The paper also discusses several issues related to the will of the manager or the entrepreneur, repectively the need to understand the role of the factors that intervene when the growth is not wanted and still obtained or when the growth is targeted but not achieved. The conclusion is in agreement with other scholars’ findings reported in the literature. Certain factors correlated with the appropriate actions may lead to the rapid growth. The paper represents a starting point for the study of those management related aspects enabling companies to grow rapidly in the Romanian business environment.

Resummation improved rapidity spectrum for gluon fusion Higgs production

International Nuclear Information System (INIS)

Ebert, Markus A.; Tackmann, Frank J.; Michel, Johannes K.L.; Muenster Univ.

2017-02-01

Gluon-induced processes such as Higgs production typically exhibit large perturbative corrections. These partially arise from large virtual corrections to the gluon form factor, which at timelike momentum transfer contains Sudakov logarithms evaluated at negative arguments ln 2 (-1)=-π 2 . It has been observed that resumming these terms in the timelike form factor leads to a much improved perturbative convergence for the total cross section. We discuss how to consistently incorporate the resummed form factor into the perturbative predictions for generic cross sections differential in the Born kinematics, including in particular the Higgs rapidity spectrum. We verify that this indeed improves the perturbative convergence, leading to smaller and more reliable perturbative uncertainties, and that this is not affected by cancellations between resummed and unresummed contributions. Combining both fixed-order and resummation uncertainties, the perturbative uncertainty for the total cross section at N 3 LO+N 3 LL φ ' is about a factor of two smaller than at N 3 LO. The perturbative uncertainty of the rapidity spectrum at NNLO+NNLL φ ' is similarly reduced compared to NNLO. We also study the analogous resummation for quark-induced processes, namely Higgs production through bottom quark annihilation and the Drell-Yan rapidity spectrum. For the former the resummation leads to a small improvement, while for the latter it confirms the already small uncertainties of the fixed-order predictions.

Will the NP workforce grow in the future? New forecasts and implications for healthcare delivery.

Science.gov (United States)

Auerbach, David I

2012-07-01

The nurse practitioner (NP) workforce has been a focus of considerable policy interest recently, particularly as the Patient Protection and Affordable Care Act may place additional demands on the healthcare professional workforce. The NP workforce has been growing rapidly in recent years, but fluctuation in enrollments in the past decades has resulted in a wide range of forecasts. To forecast the future NP workforce using a novel method that has been applied to the registered nurse and physician workforces and is robust to fluctuating enrollment trends. An age-cohort regression-based model was applied to the current and historical workforce, which was then forecasted to future years assuming stable age effects and a continuation of recent cohort trends. A total of 6798 NPs who were identified as having completed NP training in the National Sample Survey of Registered Nurses between 1992 and 2008. The future workforce is projected to grow to 244,000 in 2025, an increase of 94% from 128,000 in 2008. If NPs are defined more restrictively as those who self-identify their position title as "NP," supply is projected to grow from 86,000 to 198,000 (130%) over this period. The large projected increase in NP supply is higher and more grounded than other forecasts and has several implications: NPs will likely fulfill a substantial amount of future demand for care. Furthermore, as the ratio of NPs to Nurse Practitioners to physicians will surely grow, there could be implications for quality of care and for the configuration of future care delivery systems.

Experimental research and numerical optimisation of multi-point sheet metal forming implementation using a solid elastic cushion system

Science.gov (United States)

Tolipov, A. A.; Elghawail, A.; Shushing, S.; Pham, D.; Essa, K.

2017-09-01

There is a growing demand for flexible manufacturing techniques that meet the rapid changes in customer needs. A finite element analysis numerical optimisation technique was used to optimise the multi-point sheet forming process. Multi-point forming (MPF) is a flexible sheet metal forming technique where the same tool can be readily changed to produce different parts. The process suffers from some geometrical defects such as wrinkling and dimpling, which have been found to be the cause of the major surface quality problems. This study investigated the influence of parameters such as the elastic cushion hardness, blank holder force, coefficient of friction, cushion thickness and radius of curvature, on the quality of parts formed in a flexible multi-point stamping die. For those reasons, in this investigation, a multipoint forming stamping process using a blank holder was carried out in order to study the effects of the wrinkling, dimpling, thickness variation and forming force. The aim was to determine the optimum values of these parameters. Finite element modelling (FEM) was employed to simulate the multi-point forming of hemispherical shapes. Using the response surface method, the effects of process parameters on wrinkling, maximum deviation from the target shape and thickness variation were investigated. The results show that elastic cushion with proper thickness and polyurethane with the hardness of Shore A90. It has also been found that the application of lubrication cans improve the shape accuracy of the formed workpiece. These final results were compared with the numerical simulation results of the multi-point forming for hemispherical shapes using a blank-holder and it was found that using cushion hardness realistic to reduce wrinkling and maximum deviation.

WSGB: A Web Service-Based Growing Book

Science.gov (United States)

Dow, C. R.; Huang, L. H.; Chen, K. H.; Chiu, J. C.; Lin, C. M.

2006-01-01

Growing Book refers to an electronic textbook that is co-developed, and has the ability to be constantly maintained, by groups of independent authors, thus creating a rich and ever-growing learning environment that can be conveniently accessible from anywhere. This work designs and implements a Web Service-based Growing Book that has the merits of…

A scoping review of rapid review methods.

Science.gov (United States)

Tricco, Andrea C; Antony, Jesmin; Zarin, Wasifa; Strifler, Lisa; Ghassemi, Marco; Ivory, John; Perrier, Laure; Hutton, Brian; Moher, David; Straus, Sharon E

2015-09-16

Rapid reviews are a form of knowledge synthesis in which components of the systematic review process are simplified or omitted to produce information in a timely manner. Although numerous centers are conducting rapid reviews internationally, few studies have examined the methodological characteristics of rapid reviews. We aimed to examine articles, books, and reports that evaluated, compared, used or described rapid reviews or methods through a scoping review. MEDLINE, EMBASE, the Cochrane Library, internet websites of rapid review producers, and reference lists were searched to identify articles for inclusion. Two reviewers independently screened literature search results and abstracted data from included studies. Descriptive analysis was conducted. We included 100 articles plus one companion report that were published between 1997 and 2013. The studies were categorized as 84 application papers, seven development papers, six impact papers, and four comparison papers (one was included in two categories). The rapid reviews were conducted between 1 and 12 months, predominantly in Europe (58 %) and North America (20 %). The included studies failed to report 6 % to 73 % of the specific systematic review steps examined. Fifty unique rapid review methods were identified; 16 methods occurred more than once. Streamlined methods that were used in the 82 rapid reviews included limiting the literature search to published literature (24 %) or one database (2 %), limiting inclusion criteria by date (68 %) or language (49 %), having one person screen and another verify or screen excluded studies (6 %), having one person abstract data and another verify (23 %), not conducting risk of bias/quality appraisal (7 %) or having only one reviewer conduct the quality appraisal (7 %), and presenting results as a narrative summary (78 %). Four case studies were identified that compared the results of rapid reviews to systematic reviews. Three studies found that the conclusions between

Visualization of airflow growing soap bubbles

Science.gov (United States)

Al Rahbi, Hamood; Bock, Matthew; Ryu, Sangjin

2016-11-01

Visualizing airflow inside growing soap bubbles can answer questions regarding the fluid dynamics of soap bubble blowing, which is a model system for flows with a gas-liquid-gas interface. Also, understanding the soap bubble blowing process is practical because it can contribute to controlling industrial processes similar to soap bubble blowing. In this study, we visualized airflow which grows soap bubbles using the smoke wire technique to understand how airflow blows soap bubbles. The soap bubble blower setup was built to mimic the human blowing process of soap bubbles, which consists of a blower, a nozzle and a bubble ring. The smoke wire was placed between the nozzle and the bubble ring, and smoke-visualized airflow was captured using a high speed camera. Our visualization shows how air jet flows into the growing soap bubble on the ring and how the airflow interacts with the soap film of growing bubble.

Rapid tranquilization: An audit of Irish mental health nursing practice.

Science.gov (United States)

Nash, Michael; McDonagh, Caitriona; Culhane, Aisling; Noone, Imelda; Higgins, Agnes

2018-02-12

Rapid tranquillization is a pharmacological intervention sometimes employed in mental health care for the management of acute behavioural disturbance. It is a form of restrictive practice, which, along with seclusion and restraint, is a conventional and controversial intervention in the therapeutic management of risk in mental health settings. This study surveyed mental health nurses practice in rapid tranquillization. A self-report questionnaire was utilized which addressed aspects such as definitions of rapid tranquillization, presence of rapid tranquillization policy, types of incidents where it is used and postintervention monitoring. The results demonstrate that rapid tranquillization is an intervention used in the management of acute behavioural disturbance in various mental health settings in Ireland. Respondents showed a basic understanding of rapid tranquillization as an intervention; however, some areas reported not having a specific rapid tranquillization policy. There was some evidence of a variation in postrapid tranquillization monitoring of psychiatric/mental health and physical health. Service user debriefing following rapid tranquillization was reported to be common; however, the content of this was not elaborated on. In the light of variations in practice, specific training and the development of rapid tranquillization policies are recommended. © 2018 Australian College of Mental Health Nurses Inc.

Local Dynamics of a Laser with Rapidly Oscillating Parameters

Directory of Open Access Journals (Sweden)

E. V. Grigorieva

2013-01-01

Full Text Available The dynamics of class B lasers with the incoherent optical feedback formed by quickly vibrating external mirrors is viewed. The problem of the stability of equilibrium in a model system with rapidly oscillating coefficients is studied. The averaged system with the distributed delay is received. It is determined that in the presence of fast delay oscillation the limit of instability of a balance state moves towards significantly greater values of the feedback coefficient. The dependence of the shift with increasing the amplitude modulation has a band structure, so the rapid oscillations of delay can stabilize or destabilize the equilibrium. Normal forms which show changes of the sign of Lyapunov quantityalong border are constructed. They describe characteristics of periodic and quasiperiodic modes close to the balance state.

Fabrication of compact and stable perovskite films with optimized precursor composition in the fast-growing procedure

Energy Technology Data Exchange (ETDEWEB)

Liu, Tanghao; Zhou, Yuanyuan; Hu, Qin; Chen, Ke; Zhang, Yifei; Yang, Wenqiang; Wu, Jiang; Ye, Fengjun; Luo, Deying; Zhu, Kai; Padture, Nitin P.; Liu, Feng; Russell, Thomas; Zhu, Rui; Gong, Qihuang

2017-06-02

The fast-growing procedure (FGP) provides a simple, high-yield and lead (Pb)-release free method to prepare perovskite films. In the FGP, the ultra-dilute perovskite precursor solution is drop-cast onto a hot (~240 degrees C) substrate, where a perovskite film grows immediately accompanied by the rapid evaporation of the host solvent. In this process, all the raw materials in the precursor solution are deposited into the final perovskite film. The potential pollution caused by Pb can be significantly reduced. Properties of the FGP-processed perovskite films can be modulated by the precursor composition. While CH3NH3Cl (MACl) affects the crystallization process and leads to full surface coverage, CH(NH2)2I (FAI) enhances the thermal stability of the film. Based on the optimized precursor composition of PbI2(1-x)FAI xMACl, x=0.75, FGP-processed planar heterojunction perovskite solar cells exhibit power conversion efficiencies (PCEs) exceeding 15% with suppressed hysteresis and excellent reproducibility.

Plant/life form considerations in the rangeland hydrology and erosion model (RHEM)

Science.gov (United States)

Resilience of rangeland to erosion has largely been attributed to adequate plant cover; however, plant life/growth form, and individual species presence can have a dramatic effect on hydrologic and erosion dynamics on rangelands. Plant life/growth form refers to genetic tendency of a plant to grow i...

Rapid Onset Acute Epiglottitis Leading to Negative Pressure Pulmonary Edema

OpenAIRE

V Saraswat; P V Madhu; Suresh S Kumar

2007-01-01

Pulmonary edema is a potentially life-threatening complication of acute airway obstruction. It develops rapidly, without warning, in young healthy individuals. Two forms of post-obstructive pulmonary edema (POPE) (also known as negative pressure pulmonary edema, NPPE) have been identified. POPE I follows sudden, severe upper airway obstruction. POPE II occurs following surgical relief of chronic upper airway obstruction. Treatment for both is supportive. Full and rapid recovery can be expecte...

Closed-form expressions for flip angle variation that maximize total signal in T1-weighted rapid gradient echo MRI.

Science.gov (United States)

Drobnitzky, Matthias; Klose, Uwe

2017-03-01

Magnetization-prepared rapid gradient-echo (MPRAGE) sequences are commonly employed for T1-weighted structural brain imaging. Following a contrast preparation radiofrequency (RF) pulse, the data acquisition proceeds under nonequilibrium conditions of the relaxing longitudinal magnetization. Variation of the flip angle can be used to maximize total available signal. Simulated annealing or greedy algorithms have so far been published to numerically solve this problem, with signal-to-noise ratios optimized for clinical imaging scenarios by adhering to a predefined shape of the signal evolution. We propose an unconstrained optimization of the MPRAGE experiment that employs techniques from resource allocation theory. A new dynamic programming solution is introduced that yields closed-form expressions for optimal flip angle variation. Flip angle series are proposed that maximize total transverse magnetization (Mxy) for a range of physiologic T1 values. A 3D MPRAGE sequence is modified to allow for a controlled variation of the excitation angle. Experiments employing a T1 contrast phantom are performed at 3T. 1D acquisitions without phase encoding permit measurement of the temporal development of Mxy. Image mean signal and standard deviation for reference flip angle trains are compared in 2D measurements. Signal profiles at sharp phantom edges are acquired to access image blurring related to nonuniform Mxy development. A novel closed-form expression for flip angle variation is found that constitutes the optimal policy to reach maximum total signal. It numerically equals previously published results of other authors when evaluated under their simplifying assumptions. Longitudinal magnetization (Mz) is exhaustively used without causing abrupt changes in the measured MR signal, which is a prerequisite for artifact free images. Phantom experiments at 3T verify the expected benefit for total accumulated k-space signal when compared with published flip angle series. Describing

Development and Validation of a Stability-Indicating RP-HPLC Method for Rapid Determination of Doxycycline in Pharmaceutical Bulk and Dosage Forms

Directory of Open Access Journals (Sweden)

Shabnam Pourmoslemi, Soroush Mirfakhraee, Saeid Yaripour, Ali Mohammadi

2016-06-01

Full Text Available Background: A rapid stability-indicating RP-HPLC method for analysis of doxycycline in the presence of its degradation products was developed and validated. Methods: Forced degradation studies were carried out on bulk samples and capsule dosage forms of doxycycline using acid, base, H2O2, heat, and UV light as described by ICH for stress conditions to demonstrate the stability-indicating power of the method. Separations were performed on a Perfectsil® Target ODS column (3-5µm, 125 mm×4 mm, using a mobile phase consisting of methanol-50 mM ammonium acetate buffer (containing 0.1% v/v trifluoroacetic acid and 0.1% v/v triethylamine, pH 2.5 (50:50 v/v at room temperature. The flow rate was 0.8 mL/min. Results: The method linearity was investigated in the range of 25–500 µg/mL (r > 0.9999. The LOD and LOQ were 5 and 25 µg/mL, respectively. The method selectivity was evaluated by peak purity test using a diode array detector. There was no interference among detection of doxycycline and its stressed degradation products. Total peak purity numbers were in the range of 0.94-0.99, indicating the homogeneity of DOX peaks. Conclusion: These data show the stability-indicating nature of the method for quality control of doxycycline in bulk samples and capsule dosage forms.

Exploiting the capabilities of the Sentinel-2 multi spectral instrument for predicting growing stock volume in forest ecosystems

Science.gov (United States)

Mura, Matteo; Bottalico, Francesca; Giannetti, Francesca; Bertani, Remo; Giannini, Raffaello; Mancini, Marco; Orlandini, Simone; Travaglini, Davide; Chirici, Gherardo

2018-04-01

The spatial prediction of growing stock volume is one of the most frequent application of remote sensing for supporting the sustainable management of forest ecosystems. For such a purpose data from active or passive sensors are used as predictor variables in combination with measures taken in the field in sampling plots. The Sentinel-2 (S2) satellites are equipped with a Multi Spectral Instrument (MSI) capable of acquiring 13 bands in the visible and infrared domains with a spatial resolution varying between 10 and 60 m. The present study aimed at evaluating the performance of the S2-MSI imagery for estimating the growing stock volume of forest ecosystems. To do so we used 240 plots measured in two study areas in Italy. The imputation was carried out with eight k-Nearest Neighbours (k-NN) methods available in the open source YaImpute R package. In order to evaluate the S2-MSI performance we repeated the experimental protocol also with two other sets of images acquired by two well-known satellites equipped with multi spectral instruments: Landsat 8 OLI and RapidEye scanner. We found that S2 worked better than Landsat in 37.5% of the cases and in 62.5% of the cases better than RapidEye. In one study area the best performance was obtained with Landsat OLI (RMSD = 6.84%) and in the other with S2 (RMSD = 22.94%), both with the k-NN system based on a distance matrix calculated with the Random Forest algorithm. The results confirmed that S2 images are suitable for predicting growing stock volume obtaining good performances (average RMSD for both the test areas of less than 19%).

Resonant Drag Instabilities in protoplanetary disks: the streaming instability and new, faster-growing instabilities

Science.gov (United States)

Squire, Jonathan; Hopkins, Philip F.

2018-04-01

We identify and study a number of new, rapidly growing instabilities of dust grains in protoplanetary disks, which may be important for planetesimal formation. The study is based on the recognition that dust-gas mixtures are generically unstable to a Resonant Drag Instability (RDI), whenever the gas, absent dust, supports undamped linear modes. We show that the "streaming instability" is an RDI associated with epicyclic oscillations; this provides simple interpretations for its mechanisms and accurate analytic expressions for its growth rates and fastest-growing wavelengths. We extend this analysis to more general dust streaming motions and other waves, including buoyancy and magnetohydrodynamic oscillations, finding various new instabilities. Most importantly, we identify the disk "settling instability," which occurs as dust settles vertically into the midplane of a rotating disk. For small grains, this instability grows many orders of magnitude faster than the standard streaming instability, with a growth rate that is independent of grain size. Growth timescales for realistic dust-to-gas ratios are comparable to the disk orbital period, and the characteristic wavelengths are more than an order of magnitude larger than the streaming instability (allowing the instability to concentrate larger masses). This suggests that in the process of settling, dust will band into rings then filaments or clumps, potentially seeding dust traps, high-metallicity regions that in turn seed the streaming instability, or even overdensities that coagulate or directly collapse to planetesimals.

NASA MSFC Electrostatic Levitator (ESL) Rapid Quench System

Science.gov (United States)

SanSoucie, Michael P.; Craven, Paul D.

2014-01-01

Electrostatic levitation, a form of containerless processing, is an important tool in materials research. Levitated specimens are free from contact with a container; therefore, heterogeneous nucleation on container walls is not possible. This allows studies of deeply undercooled melts. Furthermore, studies of high-temperature, highly reactive materials are also possible. Studies of the solidification and crystallization of undercooled melts is vital to the understanding of microstructure development, particularly the formation of alloys with unique properties by rapid solidification. The NASA Marshall Space Flight Center (MSFC) Electrostatic Levitator (ESL) lab has recently been upgraded to allow for rapid quenching of levitated materials. The ESL Rapid Quench System uses a small crucible-like vessel that can be partially filled with a low melting point material, such as a Gallium alloy, as a quench medium. An undercooled sample can be dropped into the vessel to rapidly quench the sample. A carousel with nine vessels sits below the bottom electrode assembly. This system allows up to nine rapid quenches before having to break vacuum and remove the vessels. This new Rapid Quench System will allow materials science studies of undercooled materials and new materials development. In this presentation, the system is described and initial results are presented.

Rapid and accurate evaluation of the quality of commercial organic fertilizers using near infrared spectroscopy.

Directory of Open Access Journals (Sweden)

Chang Wang

Full Text Available The composting industry has been growing rapidly in China because of a boom in the animal industry. Therefore, a rapid and accurate assessment of the quality of commercial organic fertilizers is of the utmost importance. In this study, a novel technique that combines near infrared (NIR spectroscopy with partial least squares (PLS analysis is developed for rapidly and accurately assessing commercial organic fertilizers quality. A total of 104 commercial organic fertilizers were collected from full-scale compost factories in Jiangsu Province, east China. In general, the NIR-PLS technique showed accurate predictions of the total organic matter, water soluble organic nitrogen, pH, and germination index; less accurate results of the moisture, total nitrogen, and electrical conductivity; and the least accurate results for water soluble organic carbon. Our results suggested the combined NIR-PLS technique could be applied as a valuable tool to rapidly and accurately assess the quality of commercial organic fertilizers.

Rapid and accurate evaluation of the quality of commercial organic fertilizers using near infrared spectroscopy.

Science.gov (United States)

Wang, Chang; Huang, Chichao; Qian, Jian; Xiao, Jian; Li, Huan; Wen, Yongli; He, Xinhua; Ran, Wei; Shen, Qirong; Yu, Guanghui

2014-01-01

The composting industry has been growing rapidly in China because of a boom in the animal industry. Therefore, a rapid and accurate assessment of the quality of commercial organic fertilizers is of the utmost importance. In this study, a novel technique that combines near infrared (NIR) spectroscopy with partial least squares (PLS) analysis is developed for rapidly and accurately assessing commercial organic fertilizers quality. A total of 104 commercial organic fertilizers were collected from full-scale compost factories in Jiangsu Province, east China. In general, the NIR-PLS technique showed accurate predictions of the total organic matter, water soluble organic nitrogen, pH, and germination index; less accurate results of the moisture, total nitrogen, and electrical conductivity; and the least accurate results for water soluble organic carbon. Our results suggested the combined NIR-PLS technique could be applied as a valuable tool to rapidly and accurately assess the quality of commercial organic fertilizers.

Adsorption mechanisms of the nonequilibrium incorporation of admixtures in a growing crystal

Science.gov (United States)

Franke, V. D.; Punin, Yu. O.; Smetannikova, O. G.; Kenunen, D. S.

2007-12-01

The nonequilibrium partition of components between a crystal and solution is mainly controlled by impurity adsorption on the surface of the growing crystal. The specificity of adsorption on the faces of various simple forms leads to the sectorial zoning of crystals. This effect was studied experimentally for several crystallizing systems with different impurities, including isomorphous, 2d-isomorphous, and nonisomorphous, readily adsorbed impurities. In all systems, the sectorial selectivity of impurity incorporation into host crystals has been detected with partition coefficients many times higher than in the case of equilibrium partition. Specific capture of impurities by certain faces is accompanied by inhibition of their growth and modification of habit. The decrease in nonequilibrium partition coefficients with degree of oversaturation provides entrapment of impurities in the growing crystals. Thereby, the adsorption mechanism works in much the same mode for impurities of quite different nature. The behavior of partition coefficient differs drastically from impurity capturing by diffusion mechanism.

Must Star-forming Galaxies Rapidly Get Denser before They Quench?

Science.gov (United States)

Abramson, L. E.; Morishita, T.

2018-05-01

Using the deepest data yet obtained, we find no evidence preferring compaction-triggered quenching—where rapid increases in galaxy density truncate star formation—over a null hypothesis in which galaxies age at constant surface density ({{{Σ }}}e\\equiv {M}* /2π {r}e2). Results from two fully empirical analyses and one quenching-free model calculation support this claim at all z ≤ 3: (1) qualitatively, galaxies’ mean U–V colors at 6.5 ≲ {log}{{{Σ }}}e/{\\text{}}{M}ȯ {kpc}}-2≲ 10 have reddened at rates/times correlated with {{{Σ }}}e, implying that there is no density threshold at which galaxies turn red but that {{{Σ }}}e sets the pace of maturation; (2) quantitatively, the abundance of {log}{M}* /{\\text{}}{M}ȯ ≥slant 9.4 red galaxies never exceeds that of the total population a quenching time earlier at any {{{Σ }}}e, implying that galaxies need not transit from low to high densities before quenching; (3) applying d{log}{r}e/{dt}=1/2 d{log}{M}* /{dt} to a suite of lognormal star formation histories reproduces the evolution of the size–mass relation at {log}{M}* /{\\text{}}{M}ȯ ≥slant 10. All results are consistent with evolutionary rates being set ab initio by global densities, with denser objects evolving faster than less-dense ones toward a terminal quiescence induced by gas depletion or other ∼Hubble-timescale phenomena. Unless stellar ages demand otherwise, observed {{{Σ }}}e thresholds need not bear any physical relation to quenching beyond this intrinsic density–formation epoch correlation, adding to Lilly & Carollo’s arguments to that effect.

Growing Backyard Textiles

Science.gov (United States)

Nelson, Eleanor Hall

1975-01-01

For those involved in creative work with textiles, the degree of control possible in texture, finish, and color of fiber by growing and processing one's own (perhaps with students' help) can make the experience rewarding. The author describes the processes for flax and nettles and gives tips on necessary equipment. (Author/AJ)

An analysis of social consequences of rapid fertility decline in China.

Science.gov (United States)

Liu, Z; Liu, L

1988-12-01

Rapid fertility decline in China has brought about 2 direct effects: 1) the natural increase of the population has slowed down, and 2) the age structure has changed from the young to the adult type. These 2 effects have caused a series of economic and social consequences. Rapid fertility decline increases the gross national product per capita and accelerates the improvement of people's lives. Rapid fertility decline slows population growth and speeds up the accumulation of capital and the development of the economy. Since 1981, accumulation growth has exceeded consumption growth. Fertility decline alleviates the enrollment pressure on primary and secondary schools, raises the efficiency of education funds, and promotes the popularization of education. The family planning program strengthens the maternal and child health care and the medical care systems. As the result of economic development, the people's nutritional levels are improving. The physical quality of teenagers has improved steadily. The change in the age structure will alleviate the tension of rapid population growth and benefit population control in the next century. Fertility decline forces the traditional attitude toward childbearing from "more children, more happiness" to improved quality of children. The rapid fertility decline has caused a great deal of concern both inside and outside China about the aging of the population. The labor force, however, will continue to grow for the next 60 years. At present, China's population problems are still those of population growth.

Growing Safflower in Utah

OpenAIRE

Pace, M. G.; Israelsen, C. E.; Creech, E.; Allen, N.

2015-01-01

This fact sheet provides information on growing safflower in Utah. It has become popular on dryland farms in rotation with winter wheat. Safflower seed provides three products, oil, meal, and birdseed.

Menopausal women's positive experience of growing older

DEFF Research Database (Denmark)

Hvas, Lotte

2006-01-01

This paper aims to describe menopausal women's positive experience of growing older and becoming middle-aged.......This paper aims to describe menopausal women's positive experience of growing older and becoming middle-aged....

JINR rapid communications

International Nuclear Information System (INIS)

1999-01-01

The present collection of rapid communications from JINR, DUBNA, contains eight separate records on symmetry in modern physics (dedicated to the 100th anniversary of the birth of academician V.A.Fock), the double φ-meson production investigation on the Serpukhov accelerator, two-leptonic η-meson decays and SUSY without R parity, charge form factors and alpha-cluster internal structure of 12 C, increasing of muon-track reconstruction efficiency in ME1/1 Dubna prototype for the CMS/LHC, study of photon-structure function F 2 γ in the reaction e + e - → e + e - + hadrons at LEP2, jets reconstruction possibility in pAu and AuAu interactions at STAR RHIC and high-vacuum nondispersable gas absorber

JINR rapid communications

International Nuclear Information System (INIS)

1997-01-01

The present collection of rapid communications from JINR, Dubna, contains nine separate reports on effects arising from charged particles overcoming of the light velocity barrier, deformable templates for circle recognition, scintillation detectors for precise time measurements, atomic form factors and incoherent scattering functions of atoms and ions with the number of electrons N ≤ 10, experimental set-up ANOMALON for measurement of relativistic nuclear fragmentation cross sections, superconducting dipole magnet for ALICE dimuon arm spectrometer, analysis of transverse mass dependence of Bose-Einstein correlation radii using the DELPHI data, low-energy theorem in softly broken supersymmetry and study of the characteristics of particles in reactions π - , p, d, He, C + C with the total disintegration on carbon nucleus

Organization of growing random networks

Energy Technology Data Exchange (ETDEWEB)

Krapivsky, P. L.; Redner, S.

2001-06-01

The organizational development of growing random networks is investigated. These growing networks are built by adding nodes successively, and linking each to an earlier node of degree k with an attachment probability A{sub k}. When A{sub k} grows more slowly than linearly with k, the number of nodes with k links, N{sub k}(t), decays faster than a power law in k, while for A{sub k} growing faster than linearly in k, a single node emerges which connects to nearly all other nodes. When A{sub k} is asymptotically linear, N{sub k}(t){similar_to}tk{sup {minus}{nu}}, with {nu} dependent on details of the attachment probability, but in the range 2{lt}{nu}{lt}{infinity}. The combined age and degree distribution of nodes shows that old nodes typically have a large degree. There is also a significant correlation in the degrees of neighboring nodes, so that nodes of similar degree are more likely to be connected. The size distributions of the in and out components of the network with respect to a given node{emdash}namely, its {open_quotes}descendants{close_quotes} and {open_quotes}ancestors{close_quotes}{emdash}are also determined. The in component exhibits a robust s{sup {minus}2} power-law tail, where s is the component size. The out component has a typical size of order lnt, and it provides basic insights into the genealogy of the network.

Exact solutions of linear reaction-diffusion processes on a uniformly growing domain: criteria for successful colonization.

Directory of Open Access Journals (Sweden)

Matthew J Simpson

Full Text Available Many processes during embryonic development involve transport and reaction of molecules, or transport and proliferation of cells, within growing tissues. Mathematical models of such processes usually take the form of a reaction-diffusion partial differential equation (PDE on a growing domain. Previous analyses of such models have mainly involved solving the PDEs numerically. Here, we present a framework for calculating the exact solution of a linear reaction-diffusion PDE on a growing domain. We derive an exact solution for a general class of one-dimensional linear reaction-diffusion process on 0growing domain. Comparing our exact solutions with numerical approximations confirms the veracity of the method. Furthermore, our examples illustrate a delicate interplay between: (i the rate at which the domain elongates, (ii the diffusivity associated with the spreading density profile, (iii the reaction rate, and (iv the initial condition. Altering the balance between these four features leads to different outcomes in terms of whether an initial profile, located near x = 0, eventually overcomes the domain growth and colonizes the entire length of the domain by reaching the boundary where x = L(t.

[Effect of sandblasting particle sizes on bonding strength between porcelain and titanium fabricated by rapid laser forming].

Science.gov (United States)

Zhang, Li-jun; Wang, Zhong-yi; Gao, Bo; Gao, Yang; Zhang, Chun-bao

2009-11-01

To evaluate the effect of sandblasting particle sizes of Al2O3 on the bonding strength between porcelain and titanium fabricated by laser rapid forming (LRF). The thermal expansion coefficient, roughness (Ra), contact angle, surface morphology of titanium surface and the bonding strength between titanium and porcelain were evaluated after the titanium surface being sandblasted using different sizes of Al2O3 (50 microm, 120 microm, 250 microm) at a pressure of 0.5 MPa. The cast titanium specimens were used as control, and were sandblasted with 50 microm Al2O3 at the same pressure. The thermal expansion coefficient of cast titanium [(9.84 +/- 0.42) x 10(-6)/ degrees C] and LRF Ti [(9.79 +/- 0.31) x 10(-6)/ degrees C) matched that of Noritake Ti-22 dentin porcelain [(8.93 +/- 0.36) x 10(-6)/ degrees C). When larger size of Al2O3 was used, the value of Ra and contact angle increased as well. There was no significant difference in bonding strength between the LRF Ti-50 microm [(25.91 +/- 1.02) MPa] and cast titanium [(26.42 +/- 1.65) MPa]. Significantly lower bonding strength was found in LRF Ti-120 microm [(21.86 +/- 1.64) MPa] and LRF Ti-250 microm [(19.96 +/- 1.03) MPa]. The bond strength between LRF Ti and Noritake Ti-22 dentin porcelain was above the lower limit value in the ISO 9693 (25 MPa) after using 50 microm Al2O3 sandblasting in 0.5MPa air pressure.

The Quest for Gender-Sensitive and Inclusive Transport Policies in Growing Asian Cities

Directory of Open Access Journals (Sweden)

Marie Thynell

2016-06-01

Full Text Available In cities all over the world, growing numbers of women are working or studying further away from home than ever before. This article presents policies by the World Bank and recommendations by the United Nations to improve conditions for women’s mobility in cities. Although these stress different factors affecting women’s experiences of traffic and transport, they all agree about the importance of enabling women’s mobility. However, gender-sensitive policies have been largely unsuccessful. This article presents examples of conditions for women in New Delhi and other rapidly growing Asian cities that illustrate how gender norms operate. This study uses the perspectives of development research and gender studies to examine economic and political initiatives and the way women act and interact with transport in local contexts. It facilitates critical reflection upon existing transport policies and suggests ‘how’ women’s needs may be effectively addressed. More in-depth knowledge about women’s needs and the problems they face when travelling will be useful for designing of policies that address more than simply the harassments of women. More inclusive urban access would enhance conditions for women and enable them to make choices according to their needs. In this way, social science and policy will cross-pollinate one another.

Response of growing bones to irradiation

International Nuclear Information System (INIS)

Gonzalez Gonzalez, D.

1980-01-01

This thesis describes the effects of ionizing radiations on growing bones. The epiphyseal disc of growing mouse tibia was selected as a model for the experiments. An attempt has been made to obtain clinical data from irradiated bones during the childhood and to quantitate this information. Within the range of possibilities correlations have been established between the experimental and clinical data. (Auth.)

The importance of angiography in cases of growing and displacing processes in the adrenal glands

International Nuclear Information System (INIS)

Hauer, E.

1981-01-01

The objective of this investigation was to compare the distribution of the individual diagnoses concerning 45 patients angiographed with the diagnosis ''suspected growing and displacing process in the adrenal gland'' to the literature. The investigation also covered the question of whether the angiographic vessel patterns permitted to draw conclusions concerning the type of growing and displacing process. This group of 45 patients had been selected out of a collective of 101 patients who had been examined and whose angiographic diagnosis had been manifested either by an operation or by a resection. Finally, the most favourable diagnostic procedure in the various forms of tumours of the adrenal gland was discussed. The position of angiography in relation to sonography, scintiscanning, and computerized tomography was clarified. (orig./MG) [de

Management of temporo-mandibular joint ankylosis in growing children.

Science.gov (United States)

Shashikiran, N D; Reddy, S V V; Patil, R; Yavagal, C

2005-03-01

Although temporo-mandibular joint (TMJ) ankylosis is one of the most common pathologies afflicting the facial skeleton, it is also the most overlooked and under-managed problem in children. The TMJ forms the very cornerstone of cranio-facial integrity and hence its ankylosis in growing children adversely affects the growth and development of the jaws and occlusion. Impairment of speech, difficulty in mastication, poor oral hygiene, rampant caries and acute compromise of the airway pose a severe psychologic burden on the tender minds of children. The aim of this article is to present an overview of efficient management strategies, based on a case report, so as to increase its awareness among all dental surgeons involved in the treatment of children.

Management of temporo-mandibular joint ankylosis in growing children

Directory of Open Access Journals (Sweden)

Shashikiran N

2005-03-01

Full Text Available Although temporo-mandibular joint (TMJ ankylosis is one of the most common pathologies afflicting the facial skeleton, it is also the most overlooked and under-managed problem in children. The TMJ forms the very cornerstone of cranio-facial integrity and hence its ankylosis in growing children adversely affects the growth and development of the jaws and occlusion. Impairment of speech, difficulty in mastication, poor oral hygiene, rampant caries and acute compromise of the airway pose a severe psychologic burden on the tender minds of children. The aim of this article is to present an overview of efficient management strategies, based on a case report, so as to increase its awareness among all dental surgeons involved in the treatment of children.

Metaphyseal pattern: Uniqueness of this structure in growing bones originating from cartilaginous anlage

International Nuclear Information System (INIS)

Balmain, N.; Moscofian, A.; Cuisinier-Gleizes, P.

1983-01-01

Microradiographic examination of metaphyses in long and short tubular growing bones allowed detection of a repetitive, clearly defined pattern of three adjacent zones; the latter are successively formed by the mineralization of cartilaginous longitudinal intercolumnar septa and by the subsequent apposition of other mineralized tissues concurrently with resorption. Consequently, each zone of the metaphysis includes mineralized tissues of various compositions and ages, identifiable by their different mineralization densities. Microradiography of pieces of the growing skeleton in several animal species shows that the same organization is not only present in long and short tubular bones but also in many other such as the pelvis and scapula, cuboid bones like the calcaneum and talus, and cartilaginous bones at the base of the skull. This suggests that there is no difference between the osteogenesis pattern of these bones and tubular ones. The problem of identifying the factors generating such metaphyseal organization is raised. (orig.)

PROCESS FOR THE PRODUCTION OF AN ACTIVATED FORM OF UO$sub 2$

Science.gov (United States)

Polissar, M.J.

1957-09-24

A process for producing a highly active form of UO/sub 2/ characterized both by rapid oxidation in air and by rapid chlorination with CCl/sub 4/ vapor at an elevated temperature is reported. In accordance with the process, commercial UO/sub 2/, is subjected to a series of oxidation-reduction operations to produce a form of UC/sub 2/ of enhanced reactivity. By treatimg commercial UO/sub 2/ at a temperature between 335 and 485 deg C with methane, then briefly with an oxygen containing gas and followimg this by a second treatment with a methane containing gas, the original relatively stable charge of UO/sub 2/ will be transformed into an active form of UO/sub 2/.

Capital income taxation in a growing open economy

DEFF Research Database (Denmark)

Nielsen, Søren Bo; Sørensen, Peter Birch

1991-01-01

The paper studies the dynamic macroeconomic effects of various forms of capital income taxation in a model of a small open economy with perfect mobility of financial capital and intertemporal optimization on the part of households and firms. One of the noteworthy results is that the introduction...... of a (low) corporate income tax will not affect consumption in the long run, but will simply lead to a replacement of shares by foreign financial assets in household portfolios. It is also found that an anticipated investment tax credit can have and that an anticipated dividend tax will have contractionary...... effects on investment before they are introduced. Moreover, it is shown that while an unanticipated dividend tax is neutral with respect to investment, it will have real effects on consumption and net foreign assets in a growing economy...

Relative measurement of the fluxes of thermal, resonant and rapid neutrons in reactor G1; Mesures relatives des flux thermique, resonnant et rapide dans le reacteur G1

Energy Technology Data Exchange (ETDEWEB)

Carle, R; Mazancourt, T de [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1957-07-01

We sought to determine the behavior of the thermal, resonant and rapid neutron fluxes in the multiplier-reflector transition region, in the two principal directions of the system. We have also measured the variation of these different fluxes in the body of the multiplier medium in a canal filled with graphite and in an empty canal. The results are given in the form of curves representing: - the variation of the ratio of the thermal flux to the rapid flux in axial and radial transitions - the behavior of the thermal and resonant fluxes and the variation of their ratio in the same regions. (author) [French] Nous avons cherche a determiner le comportement des differents flux, thermique, resonnant et rapide a la transition milieu multiplicateur-reflecteur dans les deux directions principales du reseau. Nous avons egalement mesure la variation de ces differents flux au sein du milieu multiplicateur dans un canal rempli de graphite et dans un canal vide. Les resultats sont donnes sous forme de courbe representant: - La variation du rapport du flux thermique au flux rapide aux transitions axiale et radiale - L'allure des flux thermique et resonnant et la variation de leur rapport dans les memes regions. (auteur)

[Oral films as perspective dosage form].

Science.gov (United States)

Walicová, Veronika; Gajdziok, Jan

Oral films, namely buccal mucoadhesive films and orodispersible films represent innovative formulations for administration of a wide range of drugs. Oral films show many advantageous properties and are intended for systemic drug delivery or for local treatment of the oral mucosa. In both cases, the film represents a thin layer, which could be intended to adhere to the oral mucosa by means of mucoadhesion; or to rapid dissolution and subsequent swallowing without the need of liquid intake, in the case of orodispersible films. Main constitutive excipients are film-forming polymers, which must in the case of mucoadhesive forms remain on the mucosa within the required time interval. Oral films are currently available on the pharmaceutical market and could compete with conventional oral dosage forms in the future. oral cavity oral films buccal mucoadhesive films orodispersible films film-forming polymers.

Rapidity distributions in unequal nuclei collision at high energies and hydrodynamic model

International Nuclear Information System (INIS)

Zhuang Pengfei; Wang Zhengqing; Liu Liansou

1986-01-01

The mechanism of high-energy A'-A collisions (A>A', A'sup(1/3)>>1) and the space-time evolution of the fluid formed in the collision are analysed. The corresponding 1+1 dimensional hydrodynamic equations are set up. The average rapidity distributions are estimated and compared with cosmic ray data. The origin of the unsymmetry of rapidity distributions is explained. (orig.)

Rapidity distributions in unequal nuclei collision at high energies and hydrodynamical model

International Nuclear Information System (INIS)

Zhuang Pengfei; Wang Zhengqing

1987-01-01

The mechanism of high-energy A'-A collision (A > A', A' 1/3 >> 1) and the space-time evolution of the fluid formed in the collision are analysed. The corresponding 1 + 1 dimensional hydrodynamical equations are established. The average rapidity distributions are estimated and compared with some cosmic ray events. The origin of the nonsymmetry of rapidity distribution is explained

32P tracer studies on the efficiency of ammonium nitrate phosphates and polyphosphates for growing rice on different soil types

International Nuclear Information System (INIS)

Sadanandan, A.K.; Mohanty, S.K.; Patnaik, S.; Mistry, K.B.

1980-01-01

A pot experiment was conducted with 32 P tagged phosphates to evaluate the efficiency of ammonium nitrate phosphate containing 30, 50 and 70 percent of P in the water soluble form, tri- and tetra-ammonium pyrophosphate, as compared with mono-ammonium ortho-phosphate (MAP) for growing rice on red, laterite and black soils, with regard to recovery of applied P in soil, dry matter production and utilization of applied P by crop at flowering and grain and straw yield at harvest. Ammonium nitrate phosphates containing 50 percent or more of P in the water soluble form could be used for growing rice on all soil types. The pyrophosphates were as efficient as MAP on soils having pH 6.2 and above but less efficient in soils of lower pH. (author)

The Literature Review of a New Form of Competitiveness Called City Competitiveness

Directory of Open Access Journals (Sweden)

Osman EROĞLU

2014-06-01

Full Text Available With globalization, the rapid development of information technologies and the rapid changes in the economic structure, the country’s borders at a time increasingly depreciate and the importance of city competitiveness reveals. Although it is an ongoing debate around the world whether cities compete with each other, city competitiveness is a new form of competitiveness. Cities compete with each other to increase their competitiveness. City competitiveness is defined as having better values compared to other cities. In this study, a new form of competitiveness called city competitiveness is examined.

GDP-tubulin incorporation into growing microtubules modulates polymer stability.

Science.gov (United States)

Valiron, Odile; Arnal, Isabelle; Caudron, Nicolas; Job, Didier

2010-06-04

Microtubule growth proceeds through the endwise addition of nucleotide-bound tubulin dimers. The microtubule wall is composed of GDP-tubulin subunits, which are thought to come exclusively from the incorporation of GTP-tubulin complexes at microtubule ends followed by GTP hydrolysis within the polymer. The possibility of a direct GDP-tubulin incorporation into growing polymers is regarded as hardly compatible with recent structural data. Here, we have examined GTP-tubulin and GDP-tubulin incorporation into polymerizing microtubules using a minimal assembly system comprised of nucleotide-bound tubulin dimers, in the absence of free nucleotide. We find that GDP-tubulin complexes can efficiently co-polymerize with GTP-tubulin complexes during microtubule assembly. GDP-tubulin incorporation into microtubules occurs with similar efficiency during bulk microtubule assembly as during microtubule growth from seeds or centrosomes. Microtubules formed from GTP-tubulin/GDP-tubulin mixtures display altered microtubule dynamics, in particular a decreased shrinkage rate, apparently due to intrinsic modifications of the polymer disassembly properties. Thus, although microtubules polymerized from GTP-tubulin/GDP-tubulin mixtures or from homogeneous GTP-tubulin solutions are both composed of GDP-tubulin subunits, they have different dynamic properties, and this may reveal a novel form of microtubule "structural plasticity."

The struggle for energy. How the growing need for oil and gas will cause a world crisis

International Nuclear Information System (INIS)

Op het Veld, R.

2008-07-01

Due to the rapid and continued economic growth of China and India, energy demand is increasing rapidly. At the same time, the Western world is facing decreasing oil and gas reserves. As a result, it becomes increasingly dependent on the Middle East and countries such as Russia and Venezuela. Shell and ExxonMobil, who were once dominant oil giants, are losing territory to state energy companies such as Saudi Aramco and Gazprom. The author analyses all these developments, also based on a series of interviews with various experts from trade and industry and the government in the Netherlands and abroad. The author states that the only solution for the energy issue and the climate issue is the development of alternative energy sources. However, for the present this will not suffice to meet growing demand. The battle for energy ultimately paints a picture that is not rosy, involving a crisis and an increasing international rat race for energy. [mk] [nl

HST/WFC3 CONFIRMATION OF THE INSIDE-OUT GROWTH OF MASSIVE GALAXIES AT 0 < z < 2 AND IDENTIFICATION OF THEIR STAR-FORMING PROGENITORS AT z ∼ 3

International Nuclear Information System (INIS)

Patel, Shannon G.; Franx, Marijn; Muzzin, Adam; Van Dokkum, Pieter G.; Quadri, Ryan F.; Williams, Rik J.; Marchesini, Danilo; Holden, Bradford P.; Stefanon, Mauro

2013-01-01

We study the structural evolution of massive galaxies by linking progenitors and descendants at a constant cumulative number density of n c = 1.4 × 10 –4 Mpc –3 to z ∼ 3. Structural parameters were measured by fitting Sérsic profiles to high-resolution CANDELS HST WFC3 J 125 and H 160 imaging in the UKIDSS-UDS at 1 814 imaging in COSMOS at 0.25 c , galaxies grow in stellar mass by a factor of ∼3 from z ∼ 3 to z ∼ 0. The size evolution is complex: galaxies appear roughly constant in size from z ∼ 3 to z ∼ 2 and then grow rapidly to lower redshifts. The evolution in the surface mass density profiles indicates that most of the mass at r e ∝M 2.0 , consistent with scenarios that find dissipationless minor mergers to be a key driver of size evolution. The progenitors at z ∼ 3 were likely star-forming disks with r e ∼ 2 kpc, based on their low Sérsic index of n ∼ 1, low median axis ratio of b/a ∼ 0.52, and typical location in the star-forming region of the U – V versus V – J diagram. By z ∼ 1.5, many of these star-forming disks disappeared, giving rise to compact quiescent galaxies. Toward lower redshifts, these galaxies continued to assemble mass at larger radii and became the local ellipticals that dominate the high-mass end of the mass function at the present epoch.

Partial rip scenario - a cosmology with a growing cosmological term

International Nuclear Information System (INIS)

Stefancic, H.

2004-01-01

A cosmology with the growing cosmological term is considered. If there is no exchange of energy between vacuum and matter components, the requirement of general covariance implies the time dependence of the gravitational constant G. Irrespectively of the exact functional form of the cosmological term growth, the universe ends in a de Sitter regime with a constant asymptotic Λ, but vanishing G. Although there is no divergence of the scale factor in finite time, such as in the 'Big Rip' scenario, gravitationally bound systems eventually become unbound. In the case of systems bound by non-gravitational forces, there is no unbounding effect, as the asymptotic Λ is insufficiently large to disturb these systems

Rapid intranasal delivery of chloramphenicol acetyltransferase in the active form to different brain regions as a model for enzyme therapy in the CNS.

Science.gov (United States)

Appu, Abhilash P; Arun, Peethambaran; Krishnan, Jishnu K S; Moffett, John R; Namboodiri, Aryan M A

2016-02-01

The blood brain barrier (BBB) is critical for maintaining central nervous system (CNS) homeostasis by restricting entry of potentially toxic substances. However, the BBB is a major obstacle in the treatment of neurotoxicity and neurological disorders due to the restrictive nature of the barrier to many medications. Intranasal delivery of active enzymes to the brain has therapeutic potential for the treatment of numerous CNS enzyme deficiency disorders and CNS toxicity caused by chemical threat agents. The aim of this work is to provide a sensitive model system for analyzing the rapid delivery of active enzymes into various regions of the brain with therapeutic bioavailability. We tested intranasal delivery of chloramphenicol acetyltransferase (CAT), a relatively large (75kD) enzyme, in its active form into different regions of the brain. CAT was delivered intranasally to anaesthetized rats and enzyme activity was measured in different regions using a highly specific High Performance Thin Layer Chromatography (HP-TLC)-radiometry coupled assay. Active enzyme reached all examined areas of the brain within 15min (the earliest time point tested). In addition, the yield of enzyme activity in the brain was almost doubled in the brains of rats pre-treated with matrix metalloproteinase-9 (MMP-9). Intranasal administration of active enzymes in conjunction with MMP-9 to the CNS is both rapid and effective. The present results suggest that intranasal enzyme therapy is a promising method for counteracting CNS chemical threat poisoning, as well as for treating CNS enzyme deficiency disorders. Published by Elsevier B.V.

Rapid bacterial antibiotic susceptibility test based on simple surface-enhanced Raman spectroscopic biomarkers

Science.gov (United States)

Liu, Chia-Ying; Han, Yin-Yi; Shih, Po-Han; Lian, Wei-Nan; Wang, Huai-Hsien; Lin, Chi-Hung; Hsueh, Po-Ren; Wang, Juen-Kai; Wang, Yuh-Lin

2016-03-01

Rapid bacterial antibiotic susceptibility test (AST) and minimum inhibitory concentration (MIC) measurement are important to help reduce the widespread misuse of antibiotics and alleviate the growing drug-resistance problem. We discovered that, when a susceptible strain of Staphylococcus aureus or Escherichia coli is exposed to an antibiotic, the intensity of specific biomarkers in its surface-enhanced Raman scattering (SERS) spectra drops evidently in two hours. The discovery has been exploited for rapid AST and MIC determination of methicillin-susceptible S. aureus and wild-type E. coli as well as clinical isolates. The results obtained by this SERS-AST method were consistent with that by the standard incubation-based method, indicating its high potential to supplement or replace existing time-consuming methods and help mitigate the challenge of drug resistance in clinical microbiology.

Rapid flow cytometry analysis of antimicrobial properties of nettle powder and cranberry powder

Science.gov (United States)

Hattuniemi, Maarit; Korhonen, Johanna; Jaakkola, Mari; Räty, Jarkko; Virtanen, Vesa

2010-11-01

Both nettle (Urtica dioica) and cranberry (Vaccinium oxycoccus) are widely known to have good influence on health. The aim of this study was to investigate antimicrobial properties of nettle powder and cranberry powder against Escherichia coli (E. coli) and monitor the growth of the bacteria by a rapid flow cytometry (FCM) method. For FCM measurements samples were stained with fluorescent dyes. The inhibitory effects of plant material on growth of E. coli were estimated by comparing the results of control sample (E. coli) to E. coli samples with plant material. FCM offers both a brilliant tool to investigate the kinetics of the growth of bacterium, since subsamples can be taken from the same liquid medium during the growing period and with fluorescent dyes a rapid method to investigate viability of the bacterium.

Spectrophotometric Determination of Cilostazol in Tablet Dosage Form

African Journals Online (AJOL)

Purpose: To develop simple, rapid and selective spectrophotometric methods for the determination of cilostazol in tablet dosage form. Methods: Cilostazol was dissolved in 50 % methanol and its absorbance was scanned by ultraviolet (UV) spectrophotometry. Both linear regression equation and standard absorptivity were ...

qRT-PCR quantification of the biological control agent Trichoderma harzianum in peat and compost-based growing media.

Science.gov (United States)

Beaulieu, Robert; López-Mondéjar, Rubén; Tittarelli, Fabio; Ros, Margarita; Pascual, José Antonio

2011-02-01

To ensure proper use of Trichoderma harzianum in agriculture, accurate data must be obtained in population monitoring. The effectiveness of qRT-PCR to quantify T. harzianum in different growing media was compared to the commonly used techniques of colony counting and qPCR. Results showed that plate counting and qPCR offered similar T. harzianum quantification patterns of an initial rapid increase in fungal population that decreased over time. However, data from qRT-PCR showed a population curve of active T. harzianum with a delayed onset of initial growth which then increased throughout the experiment. Results demonstrated that T. harzianum can successfully grow in these media and that qRT-PCR can offer a more distinct representation of active T. harzianum populations. Additionally, compost amended with T. harzianum exhibited a lower Fusarium oxysporum infection rate (67%) and lower percentage of fresh weight loss (11%) in comparison to amended peat (90% infection rate, 23% fresh weight loss). Copyright © 2010 Elsevier Ltd. All rights reserved.

Effects of different feed form (dry and wet) supplemented with ...

African Journals Online (AJOL)

This study was conducted to evaluate the effect of different forms of feed presentation (dry and wet) supplemented with Probiotics containing Lactobacillus acidophilus on blood characteristics, microbial load and respiratory rate of growing pigs. Twenty-four crossbreed (Large white x Landrace) pigs with an initial body ...

Rapid identification of sequences for orphan enzymes to power accurate protein annotation.

Directory of Open Access Journals (Sweden)

Kevin R Ramkissoon

Full Text Available The power of genome sequencing depends on the ability to understand what those genes and their proteins products actually do. The automated methods used to assign functions to putative proteins in newly sequenced organisms are limited by the size of our library of proteins with both known function and sequence. Unfortunately this library grows slowly, lagging well behind the rapid increase in novel protein sequences produced by modern genome sequencing methods. One potential source for rapidly expanding this functional library is the "back catalog" of enzymology--"orphan enzymes," those enzymes that have been characterized and yet lack any associated sequence. There are hundreds of orphan enzymes in the Enzyme Commission (EC database alone. In this study, we demonstrate how this orphan enzyme "back catalog" is a fertile source for rapidly advancing the state of protein annotation. Starting from three orphan enzyme samples, we applied mass-spectrometry based analysis and computational methods (including sequence similarity networks, sequence and structural alignments, and operon context analysis to rapidly identify the specific sequence for each orphan while avoiding the most time- and labor-intensive aspects of typical sequence identifications. We then used these three new sequences to more accurately predict the catalytic function of 385 previously uncharacterized or misannotated proteins. We expect that this kind of rapid sequence identification could be efficiently applied on a larger scale to make enzymology's "back catalog" another powerful tool to drive accurate genome annotation.

Rapid Identification of Sequences for Orphan Enzymes to Power Accurate Protein Annotation

Science.gov (United States)

Ojha, Sunil; Watson, Douglas S.; Bomar, Martha G.; Galande, Amit K.; Shearer, Alexander G.

2013-01-01

The power of genome sequencing depends on the ability to understand what those genes and their proteins products actually do. The automated methods used to assign functions to putative proteins in newly sequenced organisms are limited by the size of our library of proteins with both known function and sequence. Unfortunately this library grows slowly, lagging well behind the rapid increase in novel protein sequences produced by modern genome sequencing methods. One potential source for rapidly expanding this functional library is the “back catalog” of enzymology – “orphan enzymes,” those enzymes that have been characterized and yet lack any associated sequence. There are hundreds of orphan enzymes in the Enzyme Commission (EC) database alone. In this study, we demonstrate how this orphan enzyme “back catalog” is a fertile source for rapidly advancing the state of protein annotation. Starting from three orphan enzyme samples, we applied mass-spectrometry based analysis and computational methods (including sequence similarity networks, sequence and structural alignments, and operon context analysis) to rapidly identify the specific sequence for each orphan while avoiding the most time- and labor-intensive aspects of typical sequence identifications. We then used these three new sequences to more accurately predict the catalytic function of 385 previously uncharacterized or misannotated proteins. We expect that this kind of rapid sequence identification could be efficiently applied on a larger scale to make enzymology’s “back catalog” another powerful tool to drive accurate genome annotation. PMID:24386392

Growing correlation length on cooling below the onset of caging in a simulated glass-forming liquid

DEFF Research Database (Denmark)

Lačević, N.; Starr, F. W.; Schrøder, Thomas

2002-01-01

We present a calculation of a fourth-order, time-dependent density correlation function that measures higher-order spatiotemporal correlations of the density of a liquid. From molecular dynamics simulations of a glass-forming Lennard-Jones liquid, we find that the characteristic length scale...... of the dynamics of the liquid in the alpha-relaxation regime....

Stream Clustering of Growing Objects

Science.gov (United States)

Siddiqui, Zaigham Faraz; Spiliopoulou, Myra

We study incremental clustering of objects that grow and accumulate over time. The objects come from a multi-table stream e.g. streams of Customer and Transaction. As the Transactions stream accumulates, the Customers’ profiles grow. First, we use an incremental propositionalisation to convert the multi-table stream into a single-table stream upon which we apply clustering. For this purpose, we develop an online version of K-Means algorithm that can handle these swelling objects and any new objects that arrive. The algorithm also monitors the quality of the model and performs re-clustering when it deteriorates. We evaluate our method on the PKDD Challenge 1999 dataset.

Resources for startup and growing businesses in the science and engineering sectors

Science.gov (United States)

Sabol, Joseph

2013-03-01

The American Chemical Society provides resources for members involved in forming startup and growing small businesses in the chemical and related sectors. In particular, the ACS Division of Small Chemical Businesses SCHB provides member benefits, informative programming at national and regional meetings, and networking opportunities for entrepreneurs. SCHB member benefits include listing in a directory of members' products and services, discounted expo booth rental at ACS national meetings, sponsorship to attend ACS leadership development courses, volunteer opportunities to shape and direct SCHB's operations, multiple social networking platforms, and professional networking opportunities with like-minded and similarly situated small business principals. SCHB's mission is ``To aid in the formation, development and growth of small chemical businesses.'' SCHB collaborates with other units in ACS, including local sections, the Chemical Entrepreneurship Council, the Division of Business Development & Management, Entrepreneurial Initiative, and Career Services. SCHB helps chemists gain skills to translate research into commercially successful products; build strong, growing companies that create jobs; and collaborate with professionals outside the chemical community. American Chemical Society, Division of Small Chemical Businesses

/sup 32/P tracer studies on the efficiency of ammonium nitrate phosphates and polyphosphates for growing rice on different soil types

Energy Technology Data Exchange (ETDEWEB)

Sadanandan, A K; Mohanty, S K; Patnaik, S [Central Rice Research Inst., Cuttack (India); Mistry, K B [Bhabha Atomic Research Centre, Bombay (India). Biology and Agriculture Div.

1980-12-01

A pot experiment was conducted with /sup 32/P tagged phosphates to evaluate the efficiency of ammonium nitrate phosphate containing 30, 50 and 70 percent of P in the water soluble form, tri- and tetra-ammonium pyrophosphate, as compared with mono-ammonium ortho-phosphate (MAP) for growing rice on red, laterite and black soils, with regard to recovery of applied P in soil, dry matter production and utilization of applied P by crop at flowering and grain and straw yield at harvest. Ammonium nitrate phosphates containing 50 percent or more of P in the water soluble form could be used for growing rice on all soil types. The pyrophosphates were as efficient as MAP on soils having pH 6.2 and above but less efficient in soils of lower pH.

Relative measurement of the fluxes of thermal, resonant and rapid neutrons in reactor G1; Mesures relatives des flux thermique, resonnant et rapide dans le reacteur G1

Energy Technology Data Exchange (ETDEWEB)

Carle, R.; Mazancourt, T. de [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1957-07-01

We sought to determine the behavior of the thermal, resonant and rapid neutron fluxes in the multiplier-reflector transition region, in the two principal directions of the system. We have also measured the variation of these different fluxes in the body of the multiplier medium in a canal filled with graphite and in an empty canal. The results are given in the form of curves representing: - the variation of the ratio of the thermal flux to the rapid flux in axial and radial transitions - the behavior of the thermal and resonant fluxes and the variation of their ratio in the same regions. (author) [French] Nous avons cherche a determiner le comportement des differents flux, thermique, resonnant et rapide a la transition milieu multiplicateur-reflecteur dans les deux directions principales du reseau. Nous avons egalement mesure la variation de ces differents flux au sein du milieu multiplicateur dans un canal rempli de graphite et dans un canal vide. Les resultats sont donnes sous forme de courbe representant: - La variation du rapport du flux thermique au flux rapide aux transitions axiale et radiale - L'allure des flux thermique et resonnant et la variation de leur rapport dans les memes regions. (auteur)

Rapid detox: understanding new treatment approaches for the addicted patient.

Science.gov (United States)

McCabe, S

2000-01-01

Despite substantive advances in understanding of genetic and biochemical basis of substance abuse and addiction in the last decade, little information has been translated into alternative treatment models for the addicted patient. Rapid detox, an alternative form of detox treatment, is gaining in both acceptance and popularity. To increase readers' understanding of the neurobiology of addiction and the mode of action of new detox approaches for patients addicted to opiate drugs. A review of the current literature pertaining to rapid detox. Rapid detox is a viable alternative for selected patients attempting to detox from opiate agents of abuse. Increasing knowledge of new treatment approaches allows nurses working to assist addicted patients in planning and receiving treatment based on new awareness of the neurobiology of addiction.

Long-term follow-up of large maxillary advancements with distraction osteogenesis in growing and non-growing cleft lip and palate patients.

Science.gov (United States)

Meazzini, Maria Costanza; Basile, Valentina; Mazzoleni, Fabio; Bozzetti, Alberto; Brusati, Roberto

2015-01-01

Maxillary distraction osteogenesis (DO) in cleft lip and palate patients has been described by several authors, but most studies have a relatively short follow-up and do not clearly separate growing patients from non-growing patients. The records of 22 consecutive patients affected by cleft lip and palate, who underwent Le Fort I osteotomy and maxillary distraction with a rigid external distractor (RED), were reviewed. The sample was subdivided into a growing and a non-growing group. All patients had pre-DO cephalometric records, immediately post DO, 12 months post DO and long-term records with a long-term follow-up of >5 years (range 5-13 years). As a control sample for the growing group, cleft children with a negative overjet not subjected to distraction or any protraction treatment during growth were followed up until the completion of growth. The average maxillary advancement in the growing group was 22.2 ± 5.5 mm (range: 15-32 mm); in the non-growing group, it was 17.7 ± 6.6 mm (range: 6-25 mm). Excellent post-surgical stability was recorded in the adult sample. On the other hand, growing children had an average 16% relapse in the first year post DO and an additional 26% relapse in the long-term follow-up. This study seems to point out that early Le Fort I DO allows for the correction of very severe deformities. It is followed by a relatively high amount of true skeletal relapse in children with cleft lip and palate. Prognosis should be discussed in depth with the family and true aesthetic and psychological needs assessed. Copyright © 2014 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Terrestrial aftermath of the Moon-forming impact.

Science.gov (United States)

Sleep, Norman H; Zahnle, Kevin J; Lupu, Roxana E

2014-09-13

Much of the Earth's mantle was melted in the Moon-forming impact. Gases that were not partially soluble in the melt, such as water and CO2, formed a thick, deep atmosphere surrounding the post-impact Earth. This atmosphere was opaque to thermal radiation, allowing heat to escape to space only at the runaway greenhouse threshold of approximately 100 W m(-2). The duration of this runaway greenhouse stage was limited to approximately 10 Myr by the internal energy and tidal heating, ending with a partially crystalline uppermost mantle and a solid deep mantle. At this point, the crust was able to cool efficiently and solidified at the surface. After the condensation of the water ocean, approximately 100 bar of CO2 remained in the atmosphere, creating a solar-heated greenhouse, while the surface cooled to approximately 500 K. Almost all this CO2 had to be sequestered by subduction into the mantle by 3.8 Ga, when the geological record indicates the presence of life and hence a habitable environment. The deep CO2 sequestration into the mantle could be explained by a rapid subduction of the old oceanic crust, such that the top of the crust would remain cold and retain its CO2. Kinematically, these episodes would be required to have both fast subduction (and hence seafloor spreading) and old crust. Hadean oceanic crust that formed from hot mantle would have been thicker than modern crust, and therefore only old crust underlain by cool mantle lithosphere could subduct. Once subduction started, the basaltic crust would turn into dense eclogite, increasing the rate of subduction. The rapid subduction would stop when the young partially frozen crust from the rapidly spreading ridge entered the subduction zone. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

Research on waterhammer caused by a rapid gas production in the severe accident of a light water reactor

International Nuclear Information System (INIS)

Inasaka, Fujio; Adachi, Masaki; Shiozaki, Kohki; Aya, Izuo; Nariai, Hideki

2004-01-01

In the severe accident of an LWR (Light Water Reactor), it is supposed that a large quantity of gas is generated in a water pool of the containment vessel due to a water-metal reaction or a steam explosion. A rapid bubble growth, if the water mass is pushed up having a coherency in time and direction in its movement, would give a severe waterhammer to the structure. In this study, we conducted experiments using two cylindrical model containment vessels with 1.0 and 0.428 m diameters, and investigated the behavior of water mass pushed up by a growing bubble and the scale effect of this phenomenon. In addition, we also closely observed the heavier of a growing bubble. In these experiments, a rapid bubble growth was simulated by injecting high-pressure air into a water pool. It was observed that the water mass was pushed up without an air penetration until the water level reached a certain elevation. On the basis of all data, experimental correlations which gave a rise distance or velocity of the water mass with coherency were proposed and the waterhammer pressure which affected the structure was quantitatively evaluated. The applicability of the existing two-phase flow numerical analysis code, RELAP5-3D to the waterhammer phenomenon caused by a rapid gas production was also verified. (author)

Chemical composition of metapleural gland secretions of fungus-growing and non-fungus-growing ants.

Science.gov (United States)

Vieira, Alexsandro S; Morgan, E David; Drijfhout, Falko P; Camargo-Mathias, Maria I

2012-10-01

The metapleural gland is exclusive to ants, and unusual among exocrine glands in having no mechanism for closure and retention of secretion. As yet, no clear conclusion has been reached as to the function of metapleural gland secretion. Metapleural gland secretions were investigated for fungus-growing ants representing the derived attines Trachymyrmex fuscus, Atta laevigata, and Acromyrmex coronatus, the basal attines Apterostigma pilosum and Mycetarotes parallelus, and non-fungus-growing ants of the tribes Ectatommini (Ectatomma brunneum) and Myrmicini (Pogonomyrmex naegeli). Our results showed that the secretions of leaf-cutting ants (A. laevigata and A. coronatus) and the derived attine, T. fuscus, contain a greater variety and larger quantities of volatile compounds than those of myrmicine and ectatommine ants. The most abundant compounds found in the metapleural glands of A. laevigata and A. coronatus were hydroxyacids, and phenylacetic acid (only in A. laevigata). Indole was present in all groups examined, while skatole was found in large quantities only in attines. Ketones and aldehydes are present in the secretion of some attines. Esters are present in the metapleural gland secretion of all species examined, although mainly in A. laevigata, A. coronatus, and T. fuscus. Compared with basal attines and non-fungus-growing ants, the metapleural glands of leaf-cutting ants produce more acidic compounds that may have an antibiotic or antifungal function.

Exact solutions of linear reaction-diffusion processes on a uniformly growing domain: criteria for successful colonization.

Science.gov (United States)

Simpson, Matthew J

2015-01-01

Many processes during embryonic development involve transport and reaction of molecules, or transport and proliferation of cells, within growing tissues. Mathematical models of such processes usually take the form of a reaction-diffusion partial differential equation (PDE) on a growing domain. Previous analyses of such models have mainly involved solving the PDEs numerically. Here, we present a framework for calculating the exact solution of a linear reaction-diffusion PDE on a growing domain. We derive an exact solution for a general class of one-dimensional linear reaction-diffusion process on 0exact solutions with numerical approximations confirms the veracity of the method. Furthermore, our examples illustrate a delicate interplay between: (i) the rate at which the domain elongates, (ii) the diffusivity associated with the spreading density profile, (iii) the reaction rate, and (iv) the initial condition. Altering the balance between these four features leads to different outcomes in terms of whether an initial profile, located near x = 0, eventually overcomes the domain growth and colonizes the entire length of the domain by reaching the boundary where x = L(t).

SUSTAINABLE TOURISM AND ITS FORMS - A THEORETICAL APPROACH

Directory of Open Access Journals (Sweden)

Bac Dorin

2013-07-01

Full Text Available From the second half of the twentieth century, the importance of the tourism industry to the world economy continued to grow, reaching today impressive figures: receipts of almost $ 1,000 billion and direct employment for over 70 million people (WTTC 2012, without taking into account the multiplier effect (according to the same statistics of WTTC, if considering the multiplier effect, the values are: $ 5,990 billion in tourism receipts, and 253.5 million jobs. We can say that tourism: has a higher capacity to generate and distribute incomes compared to other sectors; has a high multiplier effect; determines a high level of consumption of varied products and services. In this context, voices began to emerge, which presented the problems and challenges generated by the tourism activity. Many regions are facing real problems generated by tourism entrepreneurs and tourists who visit the community. Therefore, at the end of the last century, there were authors who sought to define a new form of tourism, which eliminated the negative impacts and increased the positive ones. As a generic term they used alternative tourism, but because of the ambiguity of the term, they tried to find a more precise term, which would define the concept easier. Thus emerged: ecotourism, rural tourism, Pro Poor Tourism etc.. All these forms have been introduced under the umbrella concept of sustainable tourism. In the present paper we will take a theoretical approach, in order to present some forms of sustainable tourism. During our research we covered the ideas and concepts promoted by several authors and academics but also some international organizations with focus on tourism. We considered these forms of tourism, as they respect all the rules of sustainable tourism and some of them have great potential to grow in both developed and emerging countries. The forms of sustainable tourism we identified are: ecotourism, pro-poor tourism, volunteer tourism and slow tourism. In

The Growing Demand for Hospice and Palliative Medicine Physicians: Will the Supply Keep Up?

Science.gov (United States)

Lupu, Dale; Quigley, Leo; Mehfoud, Nicholas; Salsberg, Edward S

2018-04-01

The need for hospice and palliative care is growing rapidly as the population increases and ages and as both hospice and palliative care become more accepted. Hospice and palliative medicine (HPM) is a relatively new physician specialty, currently training 325 new fellows annually. Given the time needed to increase the supply of specialty-trained physicians, it is important to assess future needs to guide planning for future training capacity. We modeled the need for and supply of specialist HPM physicians through the year 2040 to determine whether training capacity should continue growing. To create a benchmark for need, we used a population-based approach to look at the current geographic distribution of the HPM physician supply. To model future supply, we calculated the annual change in current supply by adding newly trained physicians and subtracting physicians leaving the labor force. The current U.S. supply of HPM specialists is 13.35 per 100,000 adults 65 and older. This ratio varies greatly across the country. Using alternate assumptions for future supply and demand, we project that need in 2040 will range from 10,640 to almost 24,000 HPM specialist physicians. Supply will range from 8100 to 19,000. Current training capacity is insufficient to keep up with population growth and demand for services. HPM fellowships would need to grow from the current 325 graduates annually to between 500 and 600 per year by 2030 to assure sufficient physician workforce for hospice and palliative care services given current service provision patterns. Copyright © 2018 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

Growing America's Energy Future

Energy Technology Data Exchange (ETDEWEB)

None

2016-06-01

The emerging U.S. bioenergy industry provides a secure and growing supply of transportation fuels, biopower, and bioproducts produced from a range of abundant, renewable biomass resources. Bioenergy can help ensure a secure, sustainable, and economically sound future by reducing U.S. dependence on foreign oil, developing domestic clean energy sources, and generating domestic green jobs. Bioenergy can also help address growing concerns about climate change by reducing greenhouse gas emissions to create a healthier environment for current and future generations.

[Development of computer aided forming techniques in manufacturing scaffolds for bone tissue engineering].

Science.gov (United States)

Wei, Xuelei; Dong, Fuhui

2011-12-01

To review recent advance in the research and application of computer aided forming techniques for constructing bone tissue engineering scaffolds. The literature concerning computer aided forming techniques for constructing bone tissue engineering scaffolds in recent years was reviewed extensively and summarized. Several studies over last decade have focused on computer aided forming techniques for bone scaffold construction using various scaffold materials, which is based on computer aided design (CAD) and bone scaffold rapid prototyping (RP). CAD include medical CAD, STL, and reverse design. Reverse design can fully simulate normal bone tissue and could be very useful for the CAD. RP techniques include fused deposition modeling, three dimensional printing, selected laser sintering, three dimensional bioplotting, and low-temperature deposition manufacturing. These techniques provide a new way to construct bone tissue engineering scaffolds with complex internal structures. With rapid development of molding and forming techniques, computer aided forming techniques are expected to provide ideal bone tissue engineering scaffolds.

Diffusion from cylindrical waste forms

International Nuclear Information System (INIS)

Thomas, G.F.

1985-05-01

The diffusion of a single component material from a finite cylindrical waste form, initially containing a uniform concentration of the material, is investigated. Under the condition that the cylinder is maintained in a well-stirred bath, expressions for the fractional inventory leached and the leach rate are derived with allowance for the possible permanent immobilization of the diffusant through its decay to a stable product and/or its irreversible reaction with the waste form matrix. The usefulness of the reported results in nuclear waste disposal applications is emphasized. The results reported herein are related to those previously derived at Oak Ridge National Laboratory by Bell and Nestor. A numerical scheme involving the partial decoupling of nested infinite summations and the use of rapidly converging rational approximants is recommended for the efficient implementation of the expressions derived to obtain reliable estimates of the bulk diffusion constant and the rate constant describing the diffusant-waste form interaction from laboratory data

Development Strategy for the Export- Oriented Horticulture in Ethiopia

NARCIS (Netherlands)

Joosten, F.J.

2007-01-01

The export-oriented horticulture sector in Ethiopia has been growing rapidly and forms an important element in the country’s efforts to expand and diversify the economy, raise export earnings and create employment. This rapid growth is remarkable particularly when placed in a historic context.

Ultrastructural differences between wall apices of growing and non-growing hyphae of Schizophyllum commune

International Nuclear Information System (INIS)

Vermeulen, C.A.; Wessels, J.G.H.

1984-01-01

Newly synthesized chitin at the hyphal apex of Schizophyllum commune was shown to be highly susceptible to chitinase degradiation and solubilization by dilute mineral acid. With time this chitin became gradually more resistant to these treatments. With a combination of the shadow-cast technique and electron microscopic autoradiography it could be shown that this process occurred as the newly synthesized chitin moved into subapical parts of growing hyphae but also in non-growing apices which had ceased growth after incorporation of the N-acetyl[6- 3 H]glucosamine. These results are in agreement with a model which explains apical morphogenesis by assuming that the newly synthesized wall material at the apex is plastic due to the presence of individual polymer chains but becomes rigidified because of subsequent physical and chemical changes involving these polymers. (Author)

THE DEVELOPMENT OF NEW ORGANIZATION FORMS OF WHOLESALE TRADE ENTERPRISES IN RUSSIA

Directory of Open Access Journals (Sweden)

Andrey N. Vashchekin

2015-01-01

Full Text Available The new conditions of wholesale business in Russia, formed by the economicreforms, led the formation and development of qualitatively different tradingactivity forms, new organization types,which involves reconsideration of traditional wholesale enterprises modelingconcepts. In the near future market willbe dominated with wholesale and retail associations. Competing with each other, they will gradually grow by the additionof small commercial enterprises. Thereis also the emergence of not previouslyencountered universal dual-use forms of trade organization resulting from thepenetration of network technologies in management.

The growing human footprint on coastal and open-ocean biogeochemistry.

Science.gov (United States)

Doney, Scott C

2010-06-18

Climate change, rising atmospheric carbon dioxide, excess nutrient inputs, and pollution in its many forms are fundamentally altering the chemistry of the ocean, often on a global scale and, in some cases, at rates greatly exceeding those in the historical and recent geological record. Major observed trends include a shift in the acid-base chemistry of seawater, reduced subsurface oxygen both in near-shore coastal water and in the open ocean, rising coastal nitrogen levels, and widespread increase in mercury and persistent organic pollutants. Most of these perturbations, tied either directly or indirectly to human fossil fuel combustion, fertilizer use, and industrial activity, are projected to grow in coming decades, resulting in increasing negative impacts on ocean biota and marine resources.

Breeding value of the second generation of soybean populations for «growing season» trait

Directory of Open Access Journals (Sweden)

О. З. Щербина

2016-02-01

Full Text Available Purpose. Studying the inheritance of such trait of soybean (Glucine max (L. Merrill as growing season length in F2 and assessing hybrid combinations to identify more quick-ripening phenotypes as compared to parents. Methods. Laboratory test, mathematico-statistical evaluation. Results. In most crossbreeding combinations, when parents differed by growing season length, late ripeness was dominated in F2, in one combination – early ripeness, in two combinations, when parents scarcely differed by growing season length, complementary effect was observed for this index. It was found that ‘Anzhelika’/‘Mageva’ combination generated the highest number of more quick-ripening forms than any of the parents (13.1%, a smaller number was identified in ‘Legenda’/‘Vizhion’ (6.4% and ‘Anzhelika’/‘Gentleman’ (4.0%, and barely noticeable number was observed in ‘Legenda’/‘Yelena’ combination (1.3%. Conclusions. In the following crossbreeding combinations as ‘Legenda’/‘Vizhion’, Legenda’/‘Korado’, ‘Legenda’/‘Ustia’, ‘Legenda’/‘Yelena’, ‘Yug-30’/‘Gentleman’, ‘No. 894’/‘Vizhion’, ‘Anzhelika’/‘Annushka’, ‘No. 894’/‘Annushka’, ‘Legenda’/‘Annushka’, ‘No. 441’/‘Gentleman’, ‘No. 441’/‘Vizhion’, ‘No. 441’/‘Annushka’, ‘Anzheli­ka’/‘Gentleman’ and ‘Anzhelika’/‘Prypiat’ when parents considerably and insignificantly differ by growing season length, late ripeness was dominated in F2. ‘Ustia’/‘Vizhion’ and ‘Yug-30’/‘ Vizhion’ crossbreeding combinations in which parents hardly differ by growing season, complementary effect was observed in F2 for this index.

Performance of machinery in potato production in one growing season

Directory of Open Access Journals (Sweden)

Kun Zhou

2015-12-01

Full Text Available Statistics on the machinery performance are essential for farm managers to make better decisions. In this paper, the performance of all machineries in five sequential operations, namely bed forming, stone separation, planting, spraying and harvesting in the potato production system, were investigated during one growing season. In order to analyse and decompose the recorded GPS data into various time and distance elements for estimation of the machinery performance, an automatic GPS analysis tool was developed. The field efficiency and field capacity were estimated for each operation. Specifically, the measured average field efficiency was 71.3% for bed forming, 68.5% for stone separation, 40.3% for planting, 69.7% for spraying, and 67.4% for harvesting. The measured average field capacities were 1.46 ha/h, 0.53 ha/h, 0.47 ha/h, 10.21 ha/h, 0.51 ha/h, for the bed forming, stone separation, planting, spraying, and harvesting operations, respectively. These results deviate from the corresponding estimations calculated based on norm data from the American Society of Agricultural and Biological Engineers (ASABE. The deviations indicate that norms provided by ASABE cannot be used directly for the prediction of performance of the machinery used in this work. Moreover, the measured data of bed forming and stone separation could be used as supplementary data for the ASABE which does not provide performance norms for these two operations. The gained results can help farm managers to make better management and operational decisions that result in potential improvement in productivity and profitability as well as in potential environmental benefits.

Performance of machinery in potato production in one growing season

Energy Technology Data Exchange (ETDEWEB)

Zhou, K.; Jensen, A.L.; Bochtis, D.D.; Sørensen, C.G.

2015-07-01

Statistics on the machinery performance are essential for farm managers to make better decisions. In this paper, the performance of all machineries in five sequential operations, namely bed forming, stone separation, planting, spraying and harvesting in the potato production system, were investigated during one growing season. In order to analyse and decompose the recorded GPS data into various time and distance elements for estimation of the machinery performance, an automatic GPS analysis tool was developed. The field efficiency and field capacity were estimated for each operation. Specifically, the measured average field efficiency was 71.3% for bed forming, 68.5% for stone separation, 40.3% for planting, 69.7% for spraying, and 67.4% for harvesting. The measured average field capacities were 1.46 ha/h, 0.53 ha/h, 0.47 ha/h, 10.21 ha/h, 0.51 ha/h, for the bed forming, stone separation, planting, spraying, and harvesting operations, respectively. These results deviate from the corresponding estimations calculated based on norm data from the American Society of Agricultural and Biological Engineers (ASABE). The deviations indicate that norms provided by ASABE cannot be used directly for the prediction of performance of the machinery used in this work. Moreover, the measured data of bed forming and stone separation could be used as supplementary data for the ASABE which does not provide performance norms for these two operations. The gained results can help farm managers to make better management and operational decisions that result in potential improvement in productivity and profitability as well as in potential environmental benefits. (Author)

Facing Two Rapidly Spreading Internet Worms

CERN Multimedia

IT Department

2009-01-01

The Internet is currently facing a growing number of computer infections due to two rapidly spreading worms. The "Conficker" and "Downadup" worms have infected an estimated 1.1 million PCs in a 24-hour period, bringing the total number of infected computers to 3.5 million [1]. Via a single USB stick, these worms were also responsible for the infection of about 40 laptops at the last EGEE conference in Istanbul. In order to reduce the impact of these worms on CERN Windows computers, the Computer Security Team has suggested several preventive measures described here. Disabling the Windows AutoRun and AutoPlay Features The Computer Security Team and the IT/IS group have decided to disable the "AutoRun" and "AutoPlay" functionality on all centrally-managed Windows computers at CERN. When inserting CDs, DVDs or USB sticks into a PC, "AutoRun" and "AutoPlay" are responsible for automatically playing music or films stored on these media, or ...

Aspects of the ecology of mat-forming lichens

Directory of Open Access Journals (Sweden)

P. D. Crittenden

2000-03-01

Full Text Available Lichen species in the genera Cladonia (subgenus Cladina, Cetraria, Stereocaulon and Alectoria are important vegetation components on well-drained terrain and on elevated micro-sites in peatlands in boreal-Arctic regions. These lichens often form closed mats, the component thalli in which grow vertically upwards at the apices and die off in the older basal regions; they are therefore only loosely attached to the underlying soil. This growth habit is relatively unusual in lichens being found in <0.5% of known species. It might facilitate internal nutrienr recycling and higher growth rates and, together with the production of allelochemicals, it might underlie the considerable ecological success of mat-forming lichens; experiments to critically assess the importance of these processes are required. Mat-forming lichens can constitute in excess of 60% of the winter food intake of caribou and reindeer. Accordingly there is a pressing need for data on lichen growth rates, measured as mass increment, in order to help determine the carrying capacity of winter ranges for rhese herbivores and to better predict recovery rates following grazing. Trampling during the snow-free season fragments lichen thalli; mat-forming lichens regenerate very successfully from thallus fragments provided trampling does nor re-occur. Frequent recurrence of trampling creates disturbed habitats from which lichens will rapidly become eliminated consistent with J.P. Grime's CSR strategy theory. Such damage to lichen ground cover has occurred where reindeer or caribou are unable to migrate away from their winter range such as on small islands or where political boundaries have been fenced; it can also occur on summer range that contains a significant lichen component and on winter range where numbers of migrarory animals become excessive. Species of Stereocaulon, and other genera that contain cyanobacteria (most notably Peltigera and Nephroma, are among the principal agents of

Optimally growing boundary layer disturbances in a convergent nozzle preceded by a circular pipe

Science.gov (United States)

Uzun, Ali; Davis, Timothy B.; Alvi, Farrukh S.; Hussaini, M. Yousuff

2017-06-01

We report the findings from a theoretical analysis of optimally growing disturbances in an initially turbulent boundary layer. The motivation behind this study originates from the desire to generate organized structures in an initially turbulent boundary layer via excitation by disturbances that are tailored to be preferentially amplified. Such optimally growing disturbances are of interest for implementation in an active flow control strategy that is investigated for effective jet noise control. Details of the optimal perturbation theory implemented in this study are discussed. The relevant stability equations are derived using both the standard decomposition and the triple decomposition. The chosen test case geometry contains a convergent nozzle, which generates a Mach 0.9 round jet, preceded by a circular pipe. Optimally growing disturbances are introduced at various stations within the circular pipe section to facilitate disturbance energy amplification upstream of the favorable pressure gradient zone within the convergent nozzle, which has a stabilizing effect on disturbance growth. Effects of temporal frequency, disturbance input and output plane locations as well as separation distance between output and input planes are investigated. The results indicate that optimally growing disturbances appear in the form of longitudinal counter-rotating vortex pairs, whose size can be on the order of several times the input plane mean boundary layer thickness. The azimuthal wavenumber, which represents the number of counter-rotating vortex pairs, is found to generally decrease with increasing separation distance. Compared to the standard decomposition, the triple decomposition analysis generally predicts relatively lower azimuthal wavenumbers and significantly reduced energy amplification ratios for the optimal disturbances.

Dynamical analysis of Schrodinger operators with growing sparse potentials

CERN Document Server

Tcheremchantsev, S

2003-01-01

We consider Scr\\"odinger operators in l^2(Z^+) with potentials of the form V(n)=S(n)+Q(n). Here S is a sparse potential: S(n)=n^{1-\\eta \\over 2 \\eta}, 0<\\eta <1, for n=L_N and S(n)=0 else, where L_N is a very fast growing sequence. The real function Q(n) is compactly supported. We give a rather complete description of the (time-averaged) dynamics exp(-itH) \\psi for different initial states \\psi. In particular, for some \\psi we calculate explicitely the "intermittency function" \\beta_\\psi^- (p) which turns out to be nonconstant. As a particular corollary of obtained results, we show that the spectral measure restricted to (-2,2) has exact Hausdorff dimension \\eta for all boundary conditions, improving the result of Jitomirskaya and Last.

Stabilities of nuclear waste forms and their geochemical interactions in repositories

International Nuclear Information System (INIS)

White, W.B.

1980-01-01

The stabilities of high-level nuclear waste forms in a repository environment are briefly discussed. The advantages and disadvantages of such waste forms as borosilicate glass, supercalcine ceramics, and synthetic minerals are presented in context with the different rock types which have been proposed as possible host rocks for repositories. It is concluded that the growing geochemical evidence favors the use of a silicate rock repository because of the effectiveness of aluminosilicate rocks as chemical barriers for most radionuclides

Mycobacterium eburneum sp. nov., a non-chromogenic, fast-growing strain isolated from sputum.

Science.gov (United States)

Nouioui, Imen; Carro, Lorena; Teramoto, Kanae; Igual, José M; Jando, Marlen; Del Carmen Montero-Calasanz, Maria; Sutcliffe, Iain; Sangal, Vartul; Goodfellow, Michael; Klenk, Hans-Peter

2017-09-01

A polyphasic study was undertaken to establish the taxonomic position of a non-chromogenic, rapidly growing Mycobacterium strain that had been isolated from sputum. The strain, CECT 8775T, has chemotaxonomic and cultural properties consistent with its classification in the genus Mycobacterium and was distinguished from the type strains of closely related mycobacterial species, notably from Mycobacterium paraense DSM 46749T, its nearest phylogenetic neighbour, based on 16S rRNA, hsp65 and rpoB gene sequence data. These organisms were also distinguished by a broad range of chemotaxonomic and phenotypic features and by a digital DNA-DNA relatedness value of 22.8 %. Consequently, the strain is considered to represent a novel species of Mycobacterium for which the name Mycobacterium eburneum sp. nov is proposed; the type strain is X82T (CECT 8775T=DSM 44358T).

IntelliGrow 2.0

DEFF Research Database (Denmark)

Markvart, Jakob; Aaslyng, Jesper Peter Mazanti; Kalita, Sebastian

2008-01-01

the system in full scale in five Danish commercial nurseries. The four steps to reach the goal are: 1) development of a demonstrator giving the grower advice on optimal climate control based on the IntelliGrow concept 2) testing the demonstrator at research facilities followed by tests at growers 3...

Influence of growing measures on weed interference and water status in maize

Directory of Open Access Journals (Sweden)

Simić Milena

2017-01-01

Full Text Available Growing modern hybrids in narrow plant spacing together with nitrogen and herbicide application gives an advantage to maize crops over weeds. The aim of the present investigation was to evaluate the effect of nitrogen form, maize row spacing and herbicide treatment on weed and maize biomass and water usage, as well as maize yield. The investigation was conducted at the Maize Research Institute Zemun Polje, Belgrade during 2014-2016. A field experiment was set up as a split-split-plot block design with four replications. The maize hybrid ZP388 was planted, and a standard and a slow-release form of urea were applied. For each N source, maize was grown at two row spacings: narrow of 50 cm, and standard of 70 cm, while weed control treatments included: C - without herbicide application, T - application of a pre-emergence mix of herbicides. Sowing was done in the second decade of April, 2014, 2015 and 2016. Six weeks after herbicide application, the fresh biomass of weeds uprooted from 1 m2 and aboveground biomass of ten crop plants per plot were measured together with dry matter after drying in a laboratory oven. Water content (% in weed and maize plants was calculated as a relation between fresh and dry biomass. Maize yield was measured at the end of each growing season and calculated with 14% of moisture. All data were processed by ANOVA. The fresh and dry biomass of weeds were significantly (P>0.05 higher in untreated control than in the treated variant, while differences in water content were not significant between the two treatments. Row spacing and urea form did not cause significant differences in weed parameters. Related to this, maize fresh and dry biomass, as well as water content, were higher in herbicide-treated variants than in control but differences were insignificant. Maize biomass was somewhat higher in 50 cm rows and after application of the slow-release urea fertilizer. Yield was higher from 70 cm rows and after application of

Laser-assisted micro sheet forming

Science.gov (United States)

Holtkamp, Jens; Gillner, Arnold

2008-01-01

The fast growing market for micro technical products requires parts with increasing complexity. While sheet metal forming enables low cost mass production with short cycle times, it is limited by the maximum degree of deformation and the quality of the cut edge. The technology of warm forming partially eliminates these deficiencies. This operation takes place at elevated temperatures before structural transformation is initiated. It combines characteristic advantages of traditional cold and hot forming processes. Lasers as heat sources provide a high, selective and controllable energy input. The general difficulty of a uniform temperature distribution during the heating process can be reached by using an Axicon which generates an annulus on the sheet metal surface. The temperature of the workpiece, measured by a pyrometer, is tuned by a PI-Controller. A tool incorporating a multistage operation die is used for the manufacturing of up to three parts at the same time. The tool is integrated into a hydraulical press. A gearwheel made of the magnesium alloy AZ31 is chosen as metal demonstrator. The quality of these punched parts could be significantly improved at elevated temperatures

Growth performance, haematology and cost benefit of growing ...

African Journals Online (AJOL)

Growing rabbits on 24-h feed access time (control) recorded a higher (p0.05) across the feed access time and restriction duration. White blood cell was higher in growing rabbits on 2-h feed access ...

CO2 Laser-Based Rapid Prototyping of Micropumps

Directory of Open Access Journals (Sweden)

Zachary Strike

2018-05-01

Full Text Available The fabrication of microdevices for fluidic control often requires the use of flexible diaphragms in a way that requires cleanroom equipment and compromises performance. We use a CO 2 laser to perform the standard ablative techniques of cutting and engraving materials, but we also apply a method that we call laser placement. This allows us to fabricate precisely-positioned and precisely-sized, isolated diaphragms. This in turn enables the rapid prototyping of integrated multilayer microfluidic devices to form complex structures without the need for manual positioning or cleanroom equipment. The fabrication process is also remarkably rapid and capable of being scaled to manufacturing levels of production. We explore the use of these devices to construct a compact system of peristaltic pumps that can form water in oil droplets without the use of the non-pulsatile pumping systems typically required. Many devices can be fabricated at a time on a sheet by sheet basis with a fabrication process that, to our knowledge, is the fastest reported to date for devices of this type (requiring only 3 h. Moreover, this system is unusually compact and self-contained.

Effect of different N fertilizer forms on antioxidant capacity and grain yield of rice growing under Cd stress

International Nuclear Information System (INIS)

Jalloh, Mohamed Alpha; Chen Jinghong; Zhen Fanrong; Zhang Guoping

2009-01-01

Cadmium contamination in soil has become a serious issue in sustainable agriculture production and food safety. A pot experiment was conducted to study the influence of four N fertilizer forms on grain yield, Cd concentration in plant tissues and oxidative stress under two Cd levels (0 and 100 mg Cd kg -1 soil). The results showed that both N form and Cd stress affected grain yield, with urea-N and NH 4 + -N treatments having significantly higher grain yields, and Cd addition reducing yield. NO 3 - -N and NH 4 + -N treated plants had the highest and lowest Cd concentration in plant tissues, respectively. Urea-N and NH 4 + -N treatments had significantly higher N accumulation in plant tissues than other two N treatments. Cd addition caused a significant increase in leaf superoxide dismutase (SOD) and peroxidase (POD) activities for all N treatments, except for NO 3 - -N treatment, with urea-N and NH 4 + -N treated plants having more increase than organic-N treated ones. The results indicated that growth inhibition, yield reduction and Cd uptake of rice plants in response to Cd addition varied with the N fertilizer form

Effect of different N fertilizer forms on antioxidant capacity and grain yield of rice growing under Cd stress.

Science.gov (United States)

Jalloh, Mohamed Alpha; Chen, Jinghong; Zhen, Fanrong; Zhang, Guoping

2009-03-15

Cadmium contamination in soil has become a serious issue in sustainable agriculture production and food safety. A pot experiment was conducted to study the influence of four N fertilizer forms on grain yield, Cd concentration in plant tissues and oxidative stress under two Cd levels (0 and 100 mg Cd kg(-1)soil). The results showed that both N form and Cd stress affected grain yield, with urea-N and NH(4)(+)-N treatments having significantly higher grain yields, and Cd addition reducing yield. NO(3)(-)-N and NH(4)(+)-N treated plants had the highest and lowest Cd concentration in plant tissues, respectively. Urea-N and NH(4)(+)-N treatments had significantly higher N accumulation in plant tissues than other two N treatments. Cd addition caused a significant increase in leaf superoxide dismutase (SOD) and peroxidase (POD) activities for all N treatments, except for NO(3)(-)-N treatment, with urea-N and NH(4)(+)-N treated plants having more increase than organic-N treated ones. The results indicated that growth inhibition, yield reduction and Cd uptake of rice plants in response to Cd addition varied with the N fertilizer form.

Rapid urbanisation and slum upgrading : what can land surveyors do?

NARCIS (Netherlands)

van der Molen, P.

2015-01-01

This paper aims at understanding the domain of rapid urbanisation and slum upgrading. Therefore it collects facts in order to clarify the status quo. The paper highlights relevant aspects, such as development of new forms of spatial planning, modern slum upgrading methods, provision of security to

Rapid thermal transient in a reactor coolant channel

International Nuclear Information System (INIS)

Cherubini, A.

1986-01-01

This report deals with the problem of one-dimensional thermo-fluid-dynamics in a reactor coolant channel, with the aim of determining the evolution in time of the coolant (H*L2O), in one-and/or two-phase regimes, subjected to a great and rapid increase in heat flux (accident conditions). To this aim, the following are set out: a) the physical model used; b) the equations inherent in the above model; c) the numerical methods employed to solve them by means of a computer programme called CABO (CAnale BOllente). Next a typical problem of rapid thermal transient resolved by CABO is reported. The results obtained, expressed in form of graphs, are fully discussed. Finally comments on possible developments of CABO follow

ACHIEVEMENTS AND PERSPECTIVES ON STONE FRUIT GROWING ON SANDY SOILS

Directory of Open Access Journals (Sweden)

Anica Durău

2012-01-01

Full Text Available Climatic conditions in the sandy soils of southern Oltenia encourage cultivation of tree species in terms of applying specific technologies. Possibility of poor sandy soils fertile capitalization, earliness in 7- 10 days of fruit ripening , high yields and quality are the main factors supporting the development of fruit growing in the sandy soils of southern Oltenia. The main objectives of the research were to CCDCPN Dăbuleni. Establish and improve stone fruit species assortment, adapted to the stress of the sandy soils, establishment and evaluation of the influence of stress on trees and their influence on the size and quality of production, development of technological links (planting distances, forms management, fertilization, getting high and consistent annual production of high quality, containing low as pesticide residues, to establish a integrated health control program of the trees with emphasis on biotechnical. Research has shown good stone species behavior, and their recommended proportion is 75% of all fruit trees (peach 36%, 14% apricot, plum15%, sweet and sour cherry fruit growing 10% of the total area. Results on peach varieties revealed: ’Redhaven’, ’Suncrest’, ’Loring’ with yields ranging from (24.8 t / ha to 29.0 t/ha with maturation period from July to August, and varieties ’NJ 244’, ’Fayette’, ’Flacara’ with productions ranging from (19.7 t / ha to 23.0 t/ha with maturation period from August to September. The sweet cherry varieties ’Van’, ’Rainier’, ’Stella’, with yields ranging from 17. 2 to 24.4 t / ha. In the range studied sour cherry were found ’Oblacinska’ varieties of 11.0 t / ha, ’Cernokaia’ with 10.5 t / ha, ’Schatten Morelle’ with 9.1 t / ha. Optimum planting density and shape of the peach crown found that the highest yields of fruit are produced in the form of vertical cordon crown, with values ranging from 15.9 t / ha at a distance of 2 m, 10.3 t / ha at a distance

Assessment of drought during corn growing season in Northeast China

Science.gov (United States)

Zhang, Qi; Hu, Zhenghua

2018-04-01

Northeast China has experienced extensive climate change during the past decades. Corn is the primary production crop in China and is sensitive to meteorological disasters, especially drought. Drought has thus greatly endangered crop production and the country's food security. The majority of previous studies has not highlighted farming adaptation activities undertaken within the changed climate, which should not be neglected. In this study, we assessed drought hazard in the corn vegetation growing period, the reproductive growing period, and the whole growing period based on data for yearly corn phenology, daily precipitation, and temperature gathered at 26 agro-meteorological stations across Northeast China from 1981 to 2009. The M-K trend test was used to detect trends in sowing date and drought. The standardized precipitation evapotranspiration index (SPEI) was used to describe drought. Drought frequency and intensity were used to assess the drought hazard in the region. We found that the sowing date was delayed in the southern part of the study area, coupled with a trend towards a shorter and more humid vegetation growing period. In the northern part of the study area, an earlier sowing date increased the length of the vegetation growing period and the reproductive growing period, while drying trends occurred within the two corn growing periods. We assessed the drought hazard during each growing period: the reproductive growing period faced a more severe drought hazard and was also the period where corn was most sensitive to water stress. Drought hazard during the total growing period was closely related to corn yield.

Searching for New Forms of Legitimacy Through Corporate Responsibility Rhetoric

DEFF Research Database (Denmark)

Castello, Itziar; Lozano, Josep

2011-01-01

This article looks into the process of searching for new forms of legitimacy among firms through corporate discourse. Through the analysis of annual sustainability reports, we have determined the existence of three types of rhetoric: (1) strategic (embedded in the scientific-economic paradigm); (2...... of the firm analyzed in this article. We claim that dialectic rhetoric seems to signal a new understanding of the firm’s role in society and a search for moral legitimation. However, this new form of rhetoric is still fairly uncommon although its use is growing. Combining theory and business examples...

Asymmetric core collapse of rapidly rotating massive star

Science.gov (United States)

Gilkis, Avishai

2018-02-01

Non-axisymmetric features are found in the core collapse of a rapidly rotating massive star, which might have important implications for magnetic field amplification and production of a bipolar outflow that can explode the star, as well as for r-process nucleosynthesis and natal kicks. The collapse of an evolved rapidly rotating MZAMS = 54 M⊙ star is followed in three-dimensional hydrodynamic simulations using the FLASH code with neutrino leakage. A rotating proto-neutron star (PNS) forms with a non-zero linear velocity. This can contribute to the natal kick of the remnant compact object. The PNS is surrounded by a turbulent medium, where high shearing is likely to amplify magnetic fields, which in turn can drive a bipolar outflow. Neutron-rich material in the PNS vicinity might induce strong r-process nucleosynthesis. The rapidly rotating PNS possesses a rotational energy of E_rot ≳ 10^{52} erg. Magnetar formation proceeding in a similar fashion will be able to deposit a portion of this energy later on in the supernova ejecta through a spin-down mechanism. These processes can be important for rare supernovae generated by rapidly rotating progenitors, even though a complete explosion is not simulated in the present study.

GrOW briefs: From research to policy | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

2017-10-17

Oct 17, 2017 ... ​For access to more GrOW findings and literature, visit the GrOW Research Series. Learn more about the GrOW program. What we do · Funding · Resources · About IDRC. Knowledge. Innovation. Solutions. Careers · Contact Us · Site map. Sign up now for IDRC news and views sent directly to your inbox ...

Rapid detection of Ganoderma-infected oil palms by microwave ergosterol extraction with HPLC and TLC.

Science.gov (United States)

Muniroh, M S; Sariah, M; Zainal Abidin, M A; Lima, N; Paterson, R R M

2014-05-01

Detection of basal stem rot (BSR) by Ganoderma of oil palms was based on foliar symptoms and production of basidiomata. Enzyme-Linked Immunosorbent Assays-Polyclonal Antibody (ELISA-PAB) and PCR have been proposed as early detection methods for the disease. These techniques are complex, time consuming and have accuracy limitations. An ergosterol method was developed which correlated well with the degree of infection in oil palms, including samples growing in plantations. However, the method was capable of being optimised. This current study was designed to develop a simpler, more rapid and efficient ergosterol method with utility in the field that involved the use of microwave extraction. The optimised procedure involved extracting a small amount of Ganoderma, or Ganoderma-infected oil palm suspended in low volumes of solvent followed by irradiation in a conventional microwave oven at 70°C and medium high power for 30s, resulting in simultaneous extraction and saponification. Ergosterol was detected by thin layer chromatography (TLC) and quantified using high performance liquid chromatography with diode array detection. The TLC method was novel and provided a simple, inexpensive method with utility in the field. The new method was particularly effective at extracting high yields of ergosterol from infected oil palm and enables rapid analysis of field samples on site, allowing infected oil palms to be treated or culled very rapidly. Some limitations of the method are discussed herein. The procedures lend themselves to controlling the disease more effectively and allowing more effective use of land currently employed to grow oil palms, thereby reducing pressure to develop new plantations. Copyright © 2014 Elsevier B.V. All rights reserved.

Comparative Plasma Exposure of Albendazole after Administration of Rapidly Disintegrating Tablets in Dogs

Directory of Open Access Journals (Sweden)

Silvina G. Castro

2013-01-01

Full Text Available The main objectives of this study were (a to evaluate the in vitro performance of the rapid disintegration tablets as a way to improve the solid dispersions and (b to study the in vivo pharmacokinetics of the albendazole modified formulation in dogs. Rapid disintegration of tablets seems to be a key factor for efficiency of solid dispersions with regard to improvement of the albendazole bioavailability. The in vivo assays performed on dogs showed a marked increase in drug plasma exposure when albendazole was given in solid dispersions incorporated into rapid disintegration tablets compared with conventional solid dosage form.

Genetics of monegenic forms of diabetes mellitus

Directory of Open Access Journals (Sweden)

Tamara Leonidovna Kuraeva

2011-03-01

Full Text Available It is universally recognized that autoimmune type 1 diabetes mellitus (DM is not the only form of this disease in children. Increasingly more children and adolescents present with DM2, MODY, and rarer syndromal forms of DM. The actual prevalence of DM other than DM1 in children and adolescents is unknown but may be estimated at 10%. Despite rare occurrence of genetic syndromes, they collectively account for almost 5% of DM cases among children. The rapid upgrowth of molecular biology opens up a wide range of possibilities for designating various symptom complexes as nosologically selfconsistent forms. New genetic syndromes associated with DM are annually described. It is important both to adequately identify and treat manifestations and complications of these syndromes in children and to provide relevant medico-genetic counseling and recommendations to the parents. Key words: non-immune diabetes mellitus, MODY, Wolfram syndrome, neonatal, syndromal forms

Bone cell kinetics in the metaphysis of the growing long bone of the rat

International Nuclear Information System (INIS)

Kimmel, D.B.; Jee, W.S.

1976-01-01

The growing long bone metaphysis of rats was studied in a cell kinetic and morphometric analysis using tritiated thymidine as a tracer of cells. The results showed striking differences in the distribution and movements of osteoprogenitor and osteoblasts as compared to the osteoclasts. The results also showed a deficiency in cell production in the proliferating bone cells in the metaphysis. A new model of bone cell origin, proliferation, and movements in the metaphysis is proposed; osteoblasts and osteoprogenitor cells, the bone surface cells endemic to the metaphysis, are a continuum in adding bone forming cells and forming new bone on the calcified cartilage cores of the metaphysis. The osteoclasts, on the other hand, arise from mononuclear blood cells brought to the metaphysis through metaphyseal blood vessel spaces near the growth cartilage-metaphyseal junction

Incorporating Edge Information into Best Merge Region-Growing Segmentation

Science.gov (United States)

Tilton, James C.; Pasolli, Edoardo

2014-01-01

We have previously developed a best merge region-growing approach that integrates nonadjacent region object aggregation with the neighboring region merge process usually employed in region growing segmentation approaches. This approach has been named HSeg, because it provides a hierarchical set of image segmentation results. Up to this point, HSeg considered only global region feature information in the region growing decision process. We present here three new versions of HSeg that include local edge information into the region growing decision process at different levels of rigor. We then compare the effectiveness and processing times of these new versions HSeg with each other and with the original version of HSeg.

Growing Plants and Minds

Science.gov (United States)

Presser, Ashley Lewis; Kamdar, Danae; Vidiksis, Regan; Goldstein, Marion; Dominguez, Ximena; Orr, Jillian

2017-01-01

Many preschool classrooms explore plant growth. However, because many plants take a long time to grow, it is often hard to facilitate engagement in some practices (i.e., since change is typically not observable from one day to another, children often forget their prior predictions or cannot recall what plants looked like days or weeks earlier).…

Biowaiver monograph for immediate-release solid oral dosage forms: fluconazole.

Science.gov (United States)

Charoo, Naseem; Cristofoletti, Rodrigo; Graham, Alexandra; Lartey, Paul; Abrahamsson, Bertil; Groot, D W; Kopp, Sabine; Langguth, Peter; Polli, James; Shah, Vinod P; Dressman, Jennifer

2014-12-01

Literature data pertaining to the decision to allow a waiver of in vivo bioequivalence (BE) testing requirements for the approval of immediate release (IR) solid oral dosage forms containing fluconazole as the only active pharmaceutical ingredient (API) are reviewed. The decision is based on solubility, dissolution, permeability, therapeutic index, pharmacokinetic parameters, pharmacodynamic properties, and other relevant data. BE/bioavailability (BA) problems and drug-excipients interaction data were also reviewed and taken into consideration. According to the biopharmaceutics classification system (BCS), fluconazole in polymorphic forms II and III is a BCS class I drug and has a wide therapeutic index. BE of test formulations from many different manufacturers containing different excipients confirmed that the risk of bioinequivalence because of formulation and manufacturing factors is low. It was inferred that risk can be further reduced if in vitro studies are performed according to biowaiver guidelines. Thus, it is concluded that a biowaiver can be recommended for fluconazole IR dosage forms if (a) fluconazole is present as polymorphic form II or III or any other form/mixture showing high solubility, (b) the selection of excipients be limited to those found in IR drug products approved in International Conference on Harmonisation (ICH) countries for the same dosage form and used in their usual amounts, and (c) both the test and comparator dosage form are very rapidly dissolving, or, rapidly dissolving throughout the shelf life with similar dissolution profiles at pH 1.2, 4.5, and 6.8. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Rapid hydrolysis of celluloses in homogeneous solution

Energy Technology Data Exchange (ETDEWEB)

Garves, K

1979-01-01

Dissolution of cellulose (I), cotton, and cotton linters in a mixture of Ac0H, Ac/sub 2/O, H/sub 2/SO/sub 4/, and DMF at 120 to 160 degrees resulted in rapid and complete hydrolysis of I with decomposition of the cellulose acetatesulfate formed by gradual addition of aqueous acid. Highly crystalline I is quickly decomposed to glucose with minimum byproduct formation. Carbohydrate products containing sugar units other than glucose are hydrolyzed with destruction of monosaccharides.

Use of rapid prototyping in prosthetic auricular restoration.

Science.gov (United States)

Turgut, Gursel; Sacak, Bulent; Kiran, Kazim; Bas, Lutfu

2009-03-01

Reconstructing auricular defects is a challenging task for facial reconstructive surgeons. Although autologous reconstruction is the first choice for reconstruction, there may be circumstances of inconvenience such as previously attempted surgery, radiotherapy, systemic conditions, or patient's wish. Auricular restorations with facial prosthesis have produced promising results, but there are still problems to be tackled for improved results. Rapid prototyping in the production of an auricular prosthesis uses the mirror image of contralateral ear and produces excellent forms, eliminating the subjective perception of the prosthodontist. Rapid prototyping also lowers the production costs by reducing the need for several sessions in the process of producing the prostheses. Between 2004 and 2007, 10 patients applied to our department with the absence of an ear on a single side. All patients were male, with an average age of 23.1 years. The etiology for the loss of the ear was mostly tumors, followed by congenital deformities and trauma, respectively. In this study, we present our application of rapid prototyping technique and report our case series of 10 patients, two of which are presented in detail.

Effect of different N fertilizer forms on antioxidant capacity and grain yield of rice growing under Cd stress

Energy Technology Data Exchange (ETDEWEB)

Jalloh, Mohamed Alpha; Chen Jinghong; Zhen Fanrong [Department of Agronomy, Huajiachi Campus, Zhejiang University, Hangzhou 310029 (China); Zhang Guoping [Department of Agronomy, Huajiachi Campus, Zhejiang University, Hangzhou 310029 (China)], E-mail: zhanggp@zju.edu.cn

2009-03-15

Cadmium contamination in soil has become a serious issue in sustainable agriculture production and food safety. A pot experiment was conducted to study the influence of four N fertilizer forms on grain yield, Cd concentration in plant tissues and oxidative stress under two Cd levels (0 and 100 mg Cd kg{sup -1} soil). The results showed that both N form and Cd stress affected grain yield, with urea-N and NH{sub 4}{sup +}-N treatments having significantly higher grain yields, and Cd addition reducing yield. NO{sub 3}{sup -}-N and NH{sub 4}{sup +}-N treated plants had the highest and lowest Cd concentration in plant tissues, respectively. Urea-N and NH{sub 4}{sup +}-N treatments had significantly higher N accumulation in plant tissues than other two N treatments. Cd addition caused a significant increase in leaf superoxide dismutase (SOD) and peroxidase (POD) activities for all N treatments, except for NO{sub 3}{sup -}-N treatment, with urea-N and NH{sub 4}{sup +}-N treated plants having more increase than organic-N treated ones. The results indicated that growth inhibition, yield reduction and Cd uptake of rice plants in response to Cd addition varied with the N fertilizer form.

Food-Growing, Air- And Water-Cleaning Module

Science.gov (United States)

Sauer, R. L.; Scheld, H. W.; Mafnuson, J. W.

1988-01-01

Apparatus produces fresh vegetables and removes pollutants from air. Hydroponic apparatus performs dual function of growing fresh vegetables and purifying air and water. Leafy vegetables rooted in granular growth medium grow in light of fluorescent lamps. Air flowing over leaves supplies carbon dioxide and receives fresh oxygen from them. Adaptable to production of food and cleaning of air and water in closed environments as in underwater research stations and submarines.

Patient specific ankle-foot orthoses using rapid prototyping.

Science.gov (United States)

Mavroidis, Constantinos; Ranky, Richard G; Sivak, Mark L; Patritti, Benjamin L; DiPisa, Joseph; Caddle, Alyssa; Gilhooly, Kara; Govoni, Lauren; Sivak, Seth; Lancia, Michael; Drillio, Robert; Bonato, Paolo

2011-01-12

Prefabricated orthotic devices are currently designed to fit a range of patients and therefore they do not provide individualized comfort and function. Custom-fit orthoses are superior to prefabricated orthotic devices from both of the above-mentioned standpoints. However, creating a custom-fit orthosis is a laborious and time-intensive manual process performed by skilled orthotists. Besides, adjustments made to both prefabricated and custom-fit orthoses are carried out in a qualitative manner. So both comfort and function can potentially suffer considerably. A computerized technique for fabricating patient-specific orthotic devices has the potential to provide excellent comfort and allow for changes in the standard design to meet the specific needs of each patient. In this paper, 3D laser scanning is combined with rapid prototyping to create patient-specific orthoses. A novel process was engineered to utilize patient-specific surface data of the patient anatomy as a digital input, manipulate the surface data to an optimal form using Computer Aided Design (CAD) software, and then download the digital output from the CAD software to a rapid prototyping machine for fabrication. Two AFOs were rapidly prototyped to demonstrate the proposed process. Gait analysis data of a subject wearing the AFOs indicated that the rapid prototyped AFOs performed comparably to the prefabricated polypropylene design. The rapidly prototyped orthoses fabricated in this study provided good fit of the subject's anatomy compared to a prefabricated AFO while delivering comparable function (i.e. mechanical effect on the biomechanics of gait). The rapid fabrication capability is of interest because it has potential for decreasing fabrication time and cost especially when a replacement of the orthosis is required.

Water hammer caused by rapid steam production in a severe accident in a light water reactor

International Nuclear Information System (INIS)

Inasaka, Fujio; Adachi, Masaki; Murata, Hiroyuki; Aya, Izuo

2007-01-01

We conducted the experimental studies on the water hammer caused by striking of a water mass pushed up by a rapidly growing steam bubble, using a cylindrical model containment vessel of 0.4286 m in diameter. In the experiments, a rapid gas growth was simulated by injecting high-pressure steam into a water pool. It was clarified that coherency of the water mass movement and its water hammer caused by the condensable gas production considerably decreased in comparison with the case of the non-condensable gas production because the rising velocity of the water mass was suppressed due to the steam bubble condensation. On the basis of the data, experimental correlations for estimating the water hammer on the structures in the containment vessel were proposed. (author)

Are foot posture and functional health different in children with growing pains?

Science.gov (United States)

Evans, Angela Margaret; Scutter, Sheila Doreen

2007-12-01

The aim of the present paper was to investigate and compare findings of foot posture and functional health between groups of children aged 4-6 years with and without leg pain (described as "growing pains"). The null hypothesis: that there is no difference in measures of either foot posture or functional health between groups of children with and without leg pain. A stratified random sample of children was obtained. The children were identified with and without leg pain using a validated questionnaire for parents. The examiner was blind to the children's pain status. The schools and child care centers were from each geographical quadrant of metropolitan Adelaide and a northern rural region of South Australia. One hundred and eighty children (94 boys, 86 girls) entered and completed the study. Children whose parents returned a completed questionnaire and consent form were entered into the study. All participants were assessed by the one examiner. The foot posture measures used were those found to be most reliable in previous studies and for which the intra-rater reliability of the examiner was ascertained. Initial analysis of foot posture measures between the leg pain and no leg pains groups indicated a statistically significant result for the measure of navicular height, but only on the left side (P = 0.033). Logistic regression modeling showed that navicular height (left foot only) was positively yet weakly related to growing pains (odds ratio, 1.072; 95% confidence interval: 0.991-1.160) and the effect was not significant (P = 0.08). Measures of functional health returned many statistically significant yet weakly correlated relationships. The null hypothesis of the present study was supported in terms of clinical significance. While the foot posture measure of navicular height on the left foot was statistically significant it was not predictive for growing pains nor clinically significant as a measure between groups. The present study does not support the

Carbon nanotubes growing on rapid thermal annealed Ni and their application to a triode-type field emission device

International Nuclear Information System (INIS)

Uh, Hyung Soo; Park, Sang Sik

2006-01-01

In this paper, we demonstrate a new triode-type field emitter arrays using carbon nanotubes (CNTs) as an electron emitter source. In the proposed structure, the gate electrode is located underneath the cathode electrode and the extractor electrode is surrounded by CNT emitters. CNTs were selectively grown on the patterned Ni catalyst layer by using plasma-enhanced chemical vapor deposition (PECVD). Vertically aligned CNTs were grown with gas mixture of acetylene and ammonia under external DC bias. Compared with a conventional under-gate structure, the proposed structure reduced the turn-on voltage by about 30%. In addition, with a view to controlling the density of CNTs, Ni catalyst thickness was varied and rapid thermal annealing (RTA) treatment was optionally adopted before CNT growth. With controlled Ni thickness and RTA condition, field emission efficiency was greatly improved by reducing the density of CNTs, which is due to the reduction of the electric field screening effect caused by dense CNTs

Generalized antifungal activity and 454-screening of Pseudonocardia and Amycolatopsis bacteria in nests of fungus-growing ants

OpenAIRE

Sen, Ruchira; Ishak, Heather D.; Estrada, Dora; Dowd, Scot E.; Hong, Eunki; Mueller, Ulrich G.

2009-01-01

In many host-microbe mutualisms, hosts use beneficial metabolites supplied by microbial symbionts. Fungus-growing (attine) ants are thought to form such a mutualism with Pseudonocardia bacteria to derive antibiotics that specifically suppress the coevolving pathogen Escovopsis, which infects the ants' fungal gardens and reduces growth. Here we test 4 key assumptions of this Pseudonocardia-Escovopsis coevolution model. Culture-dependent and culture-independent (tag-encoded 454-pyrosequencing) ...

Geothermal Grows Up

Science.gov (United States)

Johnson, William C.; Kraemer, Steven; Ormond, Paul

2011-01-01

Self-declared energy and carbon reduction goals on the part of progressive colleges and universities have driven ground source geothermal space heating and cooling systems into rapid evolution, as part of long-term climate action planning efforts. The period of single-building or single-well solutions is quickly being eclipsed by highly engineered…

The heart tube forms and elongates through dynamic cell rearrangement coordinated with foregut extension.

Science.gov (United States)

Kidokoro, Hinako; Yonei-Tamura, Sayuri; Tamura, Koji; Schoenwolf, Gary C; Saijoh, Yukio

2018-03-29

In the initiation of cardiogenesis, the heart primordia transform from bilateral flat sheets of mesoderm into an elongated midline tube. Here, we discover that this rapid architectural change is driven by actomyosin-based oriented cell rearrangement and resulting dynamic tissue reshaping (convergent extension, CE). By labeling clusters of cells spanning the entire heart primordia, we show that the heart primordia converge toward the midline to form a narrow tube, while extending perpendicularly to rapidly lengthen it. Our data for the first time visualize the process of early heart tube formation from both the medial (second) and lateral (first) heart fields, revealing that both fields form the early heart tube by essentially the same mechanism. Additionally, the adjacent endoderm coordinately forms the foregut through previously unrecognized movements that parallel those of the heart mesoderm and elongates by CE. In conclusion, our data illustrate how initially two-dimensional flat primordia rapidly change their shapes and construct the three-dimensional morphology of emerging organs in coordination with neighboring morphogenesis. © 2018. Published by The Company of Biologists Ltd.

Characteristics of temporal modulation in nonlinear propagation of broad-band lasers stacked by chirped pulses

International Nuclear Information System (INIS)

Wang Youwen; Chen Liezun; Zhang Lifu; Deng Jianqin; Zhang Jin; Wen Shuangchun; Fu Xiquan; Fan Dianyuan

2010-01-01

Characteristics of the temporal modulation riding on broad-band lasers stacked by chirped pulses are numerically investigated in nonlinear propagation. For the case of normal dispersion, the temporal modulations induced by interference among pulses and added artificially to simulate the noise weaken gradually with the increase of the propagation distance. For the case of anomalous dispersion, the temporal modulations induced by interference among pulses grow slowly at first, and start to grow rapidly after a long propagation distance; in contrast, the temporal modulations added artificially grow rapidly from the begin, indicating that the temporal peak of damage risk to the optics can be formed easily. (authors)

Growing axons analysis by using Granulometric Size Distribution

International Nuclear Information System (INIS)

Gonzalez, Mariela A; Ballarin, Virginia L; Rapacioli, Melina; CelIn, A R; Sanchez, V; Flores, V

2011-01-01

Neurite growth (neuritogenesis) in vitro is a common methodology in the field of developmental neurobiology. Morphological analyses of growing neurites are usually difficult because their thinness and low contrast usually prevent to observe clearly their shape, number, length and spatial orientation. This paper presents the use of the granulometric size distribution in order to automatically obtain information about the shape, size and spatial orientation of growing axons in tissue cultures. The results here presented show that the granulometric size distribution results in a very useful morphological tool since it allows the automatic detection of growing axons and the precise characterization of a relevant parameter indicative of the axonal growth spatial orientation such as the quantification of the angle of deviation of the growing direction. The developed algorithms automatically quantify this orientation by facilitating the analysis of these images, which is important given the large number of images that need to be processed for this type of study.

Rapid shallow breathing

Science.gov (United States)

Tachypnea; Breathing - rapid and shallow; Fast shallow breathing; Respiratory rate - rapid and shallow ... Shallow, rapid breathing has many possible medical causes, including: Asthma Blood clot in an artery in the ...

Influence of quench rates on the properties of rapidly solidified ...

Indian Academy of Sciences (India)

Unknown

Abstract. FeNbCuSiB based materials were produced in the form of ribbons by rapid solidification techniques. The crystallization, magnetic, mechanical and corrosion behaviour were studied for the prepared materials as a function of quenching rate from liquid to the solid state. Higher quench rates produced a more ...

The effect of lumbosacral manipulation on growing pains

Directory of Open Access Journals (Sweden)

Dawid de Beer

2015-10-01

Objective: The aim of this study was to determine whether lumbosacral manipulations have an effect on growing pain symptoms. Methods: Thirty participants with growing pains between the ages of 4 and 12 years were recruited. The participants were placed into two groups of 15 participants each. Group 1 received lumbosacral manipulations to restricted joints as determined by motion palpation, while Group 2 never received any professional intervention. Often parent(s/guardian(s of children who suffer from growing pains will rub the child's legs and offer verbal reassurance in an attempt to console their children. Parent(s/guardian(s of both groups were encouraged to continue to do this throughout the duration of the trial. Instructions were given to the parents so that the same rubbing technique and rubbing cream (aqueous cream were used. Subjective changes were tracked using a pain diary that the parent(s/guardian(s were asked to complete, a six-week post-study follow-up question regarding children's growing pains and the Oucher self-report pain scale. Objective measures consisted of pressure algometer readings of the tibialis anterior muscle belly. Results: The statistical data was analysed using the Friedman test, Manne—Whitney test and the Wilcoxon Signed-Rank test. The results demonstrated that both groups responded favourably to their specific treatment over time. However, the group that received lumbosacral manipulations proved to show a quicker response to treatment; and the post study follow-up of this same group showed markedly more positive feedback than the group that did not receive the treatment. These results highlighted the positive effects of chiropractic manipulation on growing pain symptoms. Conclusion: The results from this study, specifically the feedback from parent(s/guardians(s and the pain diaries, indicated that spinal manipulation is beneficial in the treatment of growing pains. The results also showed that other methods of treating growing

A retrospective approach to assess human health risks associated with growing air pollution in urbanized area of Thar Desert, western Rajasthan, India.

Science.gov (United States)

Rumana, Harcharan Singh; Sharma, Ramesh Chandra; Beniwal, Vikas; Sharma, Anil Kumar

2014-01-09

: Air pollution has been a matter of great concern globally because of the associated health risks to individuals. The situation is getting worse in developing countries with more urbanization, industrialization and more importantly the rapidly growing population posing a threat to human life in the form of pulmonary, cardiovascular, carcinogenic or asthmatic diseases by accumulating toxic pollutants, harmful gases, metals, hydrocarbons etc. The present study was undertaken to assess the magnitude of ambient air pollutants and their human health risks like respiratory ailments, infectious diseases, cardiovascular diseases and cancer using a Retrospective Approach of Bart Ostra. The parameters PM2.5, PM10, NOx, SO2, NH3 and O3 were monitored at all selected study sites monitored through a high volume sampler (APM 451 Envirotech, Envirotech Instruments Pvt. Ltd., New Delhi, India). Retrospective Approach was used for assessment of risk factors and disease burden of respiratory and cardiopulmonary health problems. Environmental burden of disease showed that the problem of health related to air pollution is a main concern particularly in the growing cities of India. High to critical level of air pollution including PM10, PM2.5, NOx, SO2, NH3 and O3 was observed in all seasons at traffic intersections and commercial sites. The respiratory infections (25% incidence in population exposed to indoor smoke problems) and a prevalence of asthma/COPD (4.4%) in households exposed to high vehicular pollution along with signs of coronary artery/heart disease and/or hypertension and cancers (37.9-52.2%), were reported requiring preventive measures. The study reflects a great concern for the mankind with the need of having streamline ways to limit air pollution and emphasize upon efficiently determining the risk of illness upon exposure to air pollution.

Implementation of a Multichannel Serial Data Streaming Algorithm using the Xilinx Serial RapidIO Solution

Science.gov (United States)

Doxley, Charles A.

2016-01-01

In the current world of applications that use reconfigurable technology implemented on field programmable gate arrays (FPGAs), there is a need for flexible architectures that can grow as the systems evolve. A project has limited resources and a fixed set of requirements that development efforts are tasked to meet. Designers must develop robust solutions that practically meet the current customer demands and also have the ability to grow for future performance. This paper describes the development of a high speed serial data streaming algorithm that allows for transmission of multiple data channels over a single serial link. The technique has the ability to change to meet new applications developed for future design considerations. This approach uses the Xilinx Serial RapidIO LOGICORE Solution to implement a flexible infrastructure to meet the current project requirements with the ability to adapt future system designs.

Growing Brazilian demand to spur gas network in South America

International Nuclear Information System (INIS)

Deffarges, E.H.; Maurer, L.I.A.

1993-01-01

A recent combination in South America of economic and geopolitical factors is prompting development of a new integrated gas-pipeline network in the continent's Southern Cone. The crucial factors include privatization, regional integration, economic growth, and environmental concerns. The area, Latin America's largest regional entity, includes Brazil (population 150 million and a 1990 GNP of about $375 billion, 9th largest in the world), Argentina (population 32 million and the third largest Latin American economy after Brazil and Mexico), Bolivia, Chile, Paraguay, and Uruguay. Argentina, Brazil, Paraguay, and Uruguay are members of the MercoSur economic bloc whose objective is to develop free trade in the region. There are very few integrated pipeline networks in the world. Besides the giant North American system, with hundreds of producers and pipelines, there is only one other large integrated network. It connects continental European countries to their outside suppliers such as Norway, the C.I.S., and Algeria. The emergence of a new pipeline system is therefore important for the natural-gas industry worldwide and even more so if it occurs in a region now growing rapidly after a decade of economic difficulties

Growing Mouse Oocytes Transiently Activate Folate Transport via Folate Receptors As They Approach Full Size1

OpenAIRE

Meredith, Megan; MacNeil, Allison H.; Trasler, Jacquetta M.; Baltz, Jay M.

2016-01-01

The folate cycle is central to cellular one-carbon metabolism, where folates are carriers of one-carbon units that are critical for synthesis of purines, thymidylate, and S-adenosylmethionine, the universal methyl donor that forms the cellular methyl pool. Although folates are well-known to be important for early embryo and fetal development, their role in oogenesis has not been clearly established. Here, folate transport proteins were detected in developing neonatal ovaries and growing oocyt...

Rapid prototyping: An innovative technique in dentistry

Directory of Open Access Journals (Sweden)

Shakeba Quadri

2017-01-01

Full Text Available Emergence of advanced digital technology has opened up new perspectives for design and production in the field of dentistry. Rapid prototyping (RP is a technique to quickly and automatically construct a three-dimensional (3D model of a part or product using 3D printers or stereolithography machines. RP has various dental applications, such as fabrication of implant surgical guides, zirconia prosthesis and molds for metal castings, maxillofacial prosthesis and frameworks for fixed and removable partial dentures, wax patterns for the dental prosthesis and complete denture. Rapid prototyping presents fascinating opportunities, but the process is difficult as it demands a high level of artistic skill, which means that the dental technicians should be able to work with the models obtained after impression to form a mirror image and achieve good esthetics. This review aims to focus on various RP methods and its application in dentistry.

Exposure to vibrations in wine growing

Directory of Open Access Journals (Sweden)

Domenico Pessina

2013-09-01

Full Text Available Apart the winter period, the activity in specialized agricultural cultivations (i.e. wine- and fruit-growing is distributed for a long period of the year. Some tasks, such as pesticide distribution, are repeated several times during the growing season. On the other hand, mechanization is one of the pillars on which is based the modern agriculture management. As a consequence, in wine growing the tractor driver has to be considered a worker potentially subjected to high level of vibrations, due to the poor machinery conditions often encountered, and sometimes to the rough soil surface of the vineyard combined with the high travelling speed adopted in carrying out many operations. About vibrations, the Italian Decree 81/08 basically refers to the European Directive 2002/44/CE, that provides some very strict limits of exposure, both for whole body and hand-arm districts. In Oltrepo pavese, a large hilly area located the south part of the Pavia province (Lombardy - Italy wine growing is the main agricultural activity; for this reason, a detailed survey on the vibration levels recorded at the tractor driver’s seat was carried out, in order to ascertain the real risk to which the operators are exposed. The activity in wine growing has been classified into 6 groups of similar tasks, as follows: 1. canopy management: pruning, trimming, binding, stripping, etc.; 2. soil management: harrowing, hoeing, subsoiling etc.; 3. inter-row management: chopping of pruning , pinching, grass mowing, etc.; 4. crop protection: pesticides and fungicides distribution, sulfidation, foliar fertilization, etc.; 5. grape harvesting: manual or mechanical; 6. transport: from the vineyard to the cellar. For each group of tasks, the vibration levels on 3 the traditional axes (x, y and z were recorded, and then an exposure time was calculated for each of them, in order to ascertain the risk level in comparison to what provided by the dedicated standard. Finally, a detailed

Rapid improvement teams.

Science.gov (United States)

Alemi, F; Moore, S; Headrick, L; Neuhauser, D; Hekelman, F; Kizys, N

1998-03-01

Suggestions, most of which are supported by empirical studies, are provided on how total quality management (TQM) teams can be used to bring about faster organizationwide improvements. Ideas are offered on how to identify the right problem, have rapid meetings, plan rapidly, collect data rapidly, and make rapid whole-system changes. Suggestions for identifying the right problem include (1) postpone benchmarking when problems are obvious, (2) define the problem in terms of customer experience so as not to blame employees nor embed a solution in the problem statement, (3) communicate with the rest of the organization from the start, (4) state the problem from different perspectives, and (5) break large problems into smaller units. Suggestions for having rapid meetings include (1) choose a nonparticipating facilitator to expedite meetings, (2) meet with each team member before the team meeting, (3) postpone evaluation of ideas, and (4) rethink conclusions of a meeting before acting on them. Suggestions for rapid planning include reducing time spent on flowcharting by focusing on the future, not the present. Suggestions for rapid data collection include (1) sample patients for surveys, (2) rely on numerical estimates by process owners, and (3) plan for rapid data collection. Suggestions for rapid organizationwide implementation include (1) change membership on cross-functional teams, (2) get outside perspectives, (3) use unfolding storyboards, and (4) go beyond self-interest to motivate lasting change in the organization. Additional empirical investigations of time saved as a consequence of the strategies provided are needed. If organizations solve their problems rapidly, fewer unresolved problems may remain.

A rapid and continuous system for immobilization of nuclear material waste by vitrification

International Nuclear Information System (INIS)

Shareef, M.U.; Hussain, S.H.; Tufail, M.; Rashid, F.

2009-01-01

The nuclear technology has prime importance and backbone for rapid development of medical sciences, industries and in power generation as an alternate source of energy. Despite all these facts there is a major problem which is always associated with nuclear technology, that is, the generation of undesirable radioactive wastes. The radioactive wastes are quite problematic and need major attention for its treatment, conditioning and properly disposal to keep the environmental activities and human ecosystem healthy and safe. There are different large scale methods and processes to treat and dispose off the radioactive wastes. These processes are evaluated and designed by the various world competent and pronounced scientists in the light of rules and safety limits set by IAEA and other regulatory authorities to protect the environment and eventually protect our ecosystem. The research and development work on radioactive waste has been proceeding for the last fifty years but still it is a core issue and a big challenge for the nuclear scientists and radiation workers. In this study a rapid and continuous system for immobilization of nuclear waste into glass matrix by vitrification has been designed. In general treatment methods, Borosilicate glass is preferred because it is efficient, cost effective and rapid to that of other radioactive waste form. In this process the simulated waste is mixed with glass forming material and process for melting to form a glassy substrate in continuous manner. The waste is being converted into vitreous form and encapsulate into a glass matrix. (author)

The effect of lumbosacral manipulation on growing pains

Directory of Open Access Journals (Sweden)

Dawid de Beer

2015-06-01

Conclusion: The results from this study, specifically the feedback from parent(s/guardians(s and the pain diaries, indicated that spinal manipulation is beneficial in the treatment of growing pains. The results also showed that other methods of treating growing pains, such as simple leg rubs, may also bring relief.

A rapid and convergent synthesis of the integrastatin core

KAUST Repository

Tadross, Pamela M.; Bugga, Pradeep; Stoltz, Brian M.

2011-01-01

The tetracyclic core of the integrastatin natural products has been prepared in a convergent and rapid manner. Our strategy relies upon a palladium(ii)-catalyzed oxidative cyclization to form the central [3.3.1]-dioxabicycle of the natural product core. Overall, the core has been completed in only 4 linear steps from known compounds. © 2011 The Royal Society of Chemistry.

A Pilot Stability Study of Dehydroepiandrosterone Rapid-dissolving Tablets Prepared by Extemporaneous Compounding.

Science.gov (United States)

Rush, Steven D; Vernak, Charlene; Zhao, Fang

2017-01-01

Dehydroepiandrosterone supplementation is used to treat a variety of conditions. Rapid-dissolving tablets are a relatively novel choice for compounded dehydroepiandrosterone dosage forms. While rapid-dissolving tablets offer ease of administration, there are uncertainties about the physical and chemical stability of the drug and dosage form during preparation and over long-term storage. This study was designed to evaluate the stability of dehydroepiandrosterone rapid-dissolving tablets just after preparation and over six months of storage. The Professional Compounding Centers of America rapid-dissolving tablet mold and base formula were used to prepare 10-mg strength dehydroepiandrosterone rapid-dissolving tablets. The formulation was heated at 100°C to 110°C for 30 minutes, released from the mold, and cooled at room temperature for 30 minutes. The resulting rapid-dissolving tablets were individually packaged in amber blister packs and stored in a stability chamber maintained at 25°C and 60% relative humidity. The stability samples were pulled at pre-determined time points for evaluation, which included visual inspection, tablet weight check, United States Pharmacopeia disintegration test, and stability-indicating high-performance liquid chromatography. The freshly prepared dehydroepiandrosterone rapiddissolving tablets exhibited satisfactory chemical and physical stability. Time 0 samples disintegrated within 40 seconds in water kept at 37°C. The high-performance liquid chromatographic results confirmed that the initial potency was 101.9% of label claim and that there was no chemical degradation from the heating procedure. Over six months of storage, there were no significant changes in visual appearance, physical integrity, or disintegration time for any of the stability samples. The high-performance liquid chromatographic results also indicated that dehydroepiandrosterone rapid-dissolving tablets retained >95% label claim with no detectable degradation

Buccal Dosage Forms: General Considerations for Pediatric Patients.

Science.gov (United States)

Montero-Padilla, Soledad; Velaga, Sitaram; Morales, Javier O

2017-02-01

The development of an appropriate dosage form for pediatric patients needs to take into account several aspects, since adult drug biodistribution differs from that of pediatrics. In recent years, buccal administration has become an attractive route, having different dosage forms under development including tablets, lozenges, films, and solutions among others. Furthermore, the buccal epithelium can allow quick access to systemic circulation, which could be used for a rapid onset of action. For pediatric patients, dosage forms to be placed in the oral cavity have higher requirements for palatability to increase acceptance and therapy compliance. Therefore, an understanding of the excipients required and their functions and properties needs to be particularly addressed. This review is focused on the differences and requirements relevant to buccal administration for pediatric patients (compared to adults) and how novel dosage forms can be less invasive and more acceptable alternatives.

Modeling of welded bead profile for rapid prototyping by robotic MAG welding

Institute of Scientific and Technical Information of China (English)

CAO Yong; ZHU Sheng; WANG Tao; WANG Wanglong

2009-01-01

As a deposition technology, robotic metal active gas(MAG) welding has shown new promise for rapid prototyping (RP) of metallic parts. During the process of metal forming using robotic MAG welding, sectional profile of single-pass welded bead is critical to formed accuracy and quality of metal pans. In this paper, the experiments of single-pass welded bead for rapid prototyping using robotic MAG welding were carried out. The effect of some edge detectors on the cross-sectional edge of welded bead was discussed and curve fitting was applied using leat square fitting. Consequently, the mathematical model of welded bead profile was developed. The experimental results show that good shape could be obtained under suitable welding parameters. Canny operawr is suitable to edge detection of welded bead profile, and the mathematical model of welded bead profile developed is approximately parabola.

The Rotary Zone Thermal Cycler: A Low-Power System Enabling Automated Rapid PCR

Science.gov (United States)

Bartsch, Michael S.; Renzi, Ronald F.; Van de Vreugde, James L.; Kim, Hanyoup; Knight, Daniel L.; Sinha, Anupama; Branda, Steven S.; Patel, Kamlesh D.

2015-01-01

Advances in molecular biology, microfluidics, and laboratory automation continue to expand the accessibility and applicability of these methods beyond the confines of conventional, centralized laboratory facilities and into point of use roles in clinical, military, forensic, and field-deployed applications. As a result, there is a growing need to adapt the unit operations of molecular biology (e.g., aliquoting, centrifuging, mixing, and thermal cycling) to compact, portable, low-power, and automation-ready formats. Here we present one such adaptation, the rotary zone thermal cycler (RZTC), a novel wheel-based device capable of cycling up to four different fixed-temperature blocks into contact with a stationary 4-microliter capillary-bound sample to realize 1-3 second transitions with steady state heater power of less than 10 W. We demonstrate the utility of the RZTC for DNA amplification as part of a highly integrated rotary zone PCR (rzPCR) system that uses low-volume valves and syringe-based fluid handling to automate sample loading and unloading, thermal cycling, and between-run cleaning functionalities in a compact, modular form factor. In addition to characterizing the performance of the RZTC and the efficacy of different online cleaning protocols, we present preliminary results for rapid single-plex PCR, multiplex short tandem repeat (STR) amplification, and second strand cDNA synthesis. PMID:25826708

The rotary zone thermal cycler: a low-power system enabling automated rapid PCR.

Directory of Open Access Journals (Sweden)

Michael S Bartsch

Full Text Available Advances in molecular biology, microfluidics, and laboratory automation continue to expand the accessibility and applicability of these methods beyond the confines of conventional, centralized laboratory facilities and into point of use roles in clinical, military, forensic, and field-deployed applications. As a result, there is a growing need to adapt the unit operations of molecular biology (e.g., aliquoting, centrifuging, mixing, and thermal cycling to compact, portable, low-power, and automation-ready formats. Here we present one such adaptation, the rotary zone thermal cycler (RZTC, a novel wheel-based device capable of cycling up to four different fixed-temperature blocks into contact with a stationary 4-microliter capillary-bound sample to realize 1-3 second transitions with steady state heater power of less than 10 W. We demonstrate the utility of the RZTC for DNA amplification as part of a highly integrated rotary zone PCR (rzPCR system that uses low-volume valves and syringe-based fluid handling to automate sample loading and unloading, thermal cycling, and between-run cleaning functionalities in a compact, modular form factor. In addition to characterizing the performance of the RZTC and the efficacy of different online cleaning protocols, we present preliminary results for rapid single-plex PCR, multiplex short tandem repeat (STR amplification, and second strand cDNA synthesis.

Importance of growth characteristics for yield of barley in different growing systems: will growth characteristics describe yield diffently in different growing systems?

DEFF Research Database (Denmark)

Kristensen, Kristian; Ericson, Lars

2008-01-01

The interest in organic grown cereals has increased the need for variety tests under organic growing systems and/or the knowledge on whether growth characteristics describe yield differently under conventional and organic conditions. This paper is a contribution to that question by examining...... the relationships between some important growth characteristics in barley trials in both systems in Northern Sweden and in Denmark. Mixed model analyses were used for regressions of growth characteristics (or transformations of those) on yield (and log-transformed yield), allowing the slope to depend on the growing...... system. The analyses showed that diseases seemed to have a less negative effect on yield in the organic growing system than in the conventional growing system if pesticides were not applied. For other characteristics the effect depended on the country. This was the case for grain characteristics where...

Marijuana growing operations in British Columbia revisited, 1997-2003

Energy Technology Data Exchange (ETDEWEB)

Plecas, D.; Malm, A.; Kinney, B. [University College of the Fraser Valley, Abbotsford, BC (Canada). Dept. of Criminology and Criminal Justice]|[University College of the Fraser Valley, Abbotsford, BC (Canada). International Centre for Urban Research Studies

2005-03-01

The results of a comprehensive study of marihuana cultivation in British Columbia were presented. This report describes the incidents of marihuana grow operations coming to the attention of the police; the characteristics of marihuana growing operations; the suspects involved; the actions taken by the police and courts; and penalty. The study confirms that these operations which are dispersed throughout the province are increasing in both size and sophistication. The average number of kilograms of harvested marihuana seized per grow operation tripled from 1997 to 2003. In addition, the number of high intensity lights seized per operation also grew, leading to an associated increase in the average amount of electricity theft per operation. About 1 in 5 grow operations involved hydro theft. The average cost associated with hydro theft per operation was about $2,880 in 1997 and $3,740 in 2003. In 2003, it is estimated that growers stole more than $3,200,000 from BC Hydro. In addition to electricity by-passes, 15 per cent of indoor grow operations contained hazards such as weapons, explosives, and other drugs. 25 tabs., 34 figs.

Patient specific ankle-foot orthoses using rapid prototyping

Directory of Open Access Journals (Sweden)

Sivak Seth

2011-01-01

Full Text Available Abstract Background Prefabricated orthotic devices are currently designed to fit a range of patients and therefore they do not provide individualized comfort and function. Custom-fit orthoses are superior to prefabricated orthotic devices from both of the above-mentioned standpoints. However, creating a custom-fit orthosis is a laborious and time-intensive manual process performed by skilled orthotists. Besides, adjustments made to both prefabricated and custom-fit orthoses are carried out in a qualitative manner. So both comfort and function can potentially suffer considerably. A computerized technique for fabricating patient-specific orthotic devices has the potential to provide excellent comfort and allow for changes in the standard design to meet the specific needs of each patient. Methods In this paper, 3D laser scanning is combined with rapid prototyping to create patient-specific orthoses. A novel process was engineered to utilize patient-specific surface data of the patient anatomy as a digital input, manipulate the surface data to an optimal form using Computer Aided Design (CAD software, and then download the digital output from the CAD software to a rapid prototyping machine for fabrication. Results Two AFOs were rapidly prototyped to demonstrate the proposed process. Gait analysis data of a subject wearing the AFOs indicated that the rapid prototyped AFOs performed comparably to the prefabricated polypropylene design. Conclusions The rapidly prototyped orthoses fabricated in this study provided good fit of the subject's anatomy compared to a prefabricated AFO while delivering comparable function (i.e. mechanical effect on the biomechanics of gait. The rapid fabrication capability is of interest because it has potential for decreasing fabrication time and cost especially when a replacement of the orthosis is required.

Rapid eye movement sleep behavior disorder--diagnostik, årsager og behandling

DEFF Research Database (Denmark)

Zoetmulder, Marielle; Jennum, Poul Jørgen

2009-01-01

Rapid eye movement (REM) sleep behaviour disorder (RBD) is characterized by loss of REM sleep and related electromyographic atonia with marked muscular activity and dream enactment behaviour. RBD is seen in 0.5% of the population. It occurs in an idiopathic form and secondarily to medical...

eRME - Rapid Maxillary Expansion in the economic way

Directory of Open Access Journals (Sweden)

Sonali Mahadevia

2011-01-01

Full Text Available Aim and Objectives: Rapid Maxillary Expansion constitutes a routine clinical procedure in orthodontics, involving separation of mid-palatine suture which is usually done with help of the Hyrax screw. However, because of its high cost, the use has been limited, especially in institutions. So, the purpose of this study was to construct an economical device which can expand the maxillary arch in growing patients. Materials and Methods: Six patients having constricted maxilla and posterior skeletal crossbite were randomly selected from the Department of Orthodontics. A unique, easy and simple alternative device for expanding the maxillary arch called economic Rapid Maxillary Expander (eRME has been fabricated at about one-tenth the cost of the conventional Hyrax. Pre- and post-treatment effects were statistically tested by using paired t-test at 0.05 level of significance. Results and Conclusion: The study results showed an average expansion in canine, premolar and molar regions of 4.4 mm, 6.8 mm and 9.4 mm, respectively, having significant difference pre-and post-treatment. Thus, it shows that maxillary expansion is efficiently possible with the application of this newly constructed device named eRME. This appliance also acts as a fixed retainer to avoid relapse, hence negating the need for a separate retainer.

Analysis of multidrug resistant group B streptococci with reduced penicillin susceptibility forming small, less hemolytic colonies.

Directory of Open Access Journals (Sweden)

Hirotsugu Banno

Full Text Available Group B streptococci (GBS; Streptococcus agalactiae are the leading cause of neonatal invasive diseases and are also important pathogens for elderly adults. Until now, nearly all GBS with reduced penicillin susceptibility (PRGBS have shown β-hemolytic activity and grow on sheep blood agar. However, we have previously reported three PRGBS clinical isolates harboring a CylK deletion that form small less hemolytic colonies. In this study, we examined the causes of small, less hemolytic colony formation in these clinical isolates. Isogenic strains were sequenced to identify the mutation related to a small colony size. We identified a 276_277insG nucleic acid insertion in the thiamin pyrophosphokinase (tpk gene, resulting in premature termination at amino acid 103 in TPK, as a candidate mutation responsible for small colony formation. The recombinant strain Δtpk, which harbored the 276_277insG insertion in the tpk gene, showed small colony formation. The recombinant strain ΔcylK, which harbored the G379T substitution in cylK, showed a reduction in hemolytic activity. The phenotypes of both recombinant strains were complemented by the expression of intact TPK or CylK, respectively. Moreover, the use of Rapid ID 32 API and VITEK MS to identify strains as GBS was evaluated clinical isolates and recombinant strains. VITEK MS, but not Rapid ID 32 API, was able to accurately identify the strains as GBS. In conclusion, we determined that mutations in tpk and cylK caused small colonies and reduced hemolytic activity, respectively, and characterized the clinical isolates in detail.

Hard magnetic properties of rapidly annealed NdFeB thin films on Nb and V buffer layers

International Nuclear Information System (INIS)

Jiang, H.; Evans, J.; O'Shea, M.J.; Du Jianhua

2001-01-01

NdFeB thin films of the form A (20 nm)/NdFeB(d nm)/A(20 nm), where d ranges from 54 to 540 nm and the buffer layer A is Nb or V were prepared on a Si(1 0 0) substrate by magnetron sputtering. The hard Nd 2 Fe 14 B phase is formed by a 30 s rapid anneal or a 20 min anneal. Average crystallite size ranged from 20 to 35 nm with the rapidly annealed samples having the smaller crystallite size. These samples also exhibited a larger coercivity and energy product than those treated by a 20 min vacuum anneal. A maximum coercivity of 26.3 kOe at room temperature was obtained for a Nb/NdFeB (180 nm)/Nb film after a rapid anneal at 725 deg. C. Initial magnetization curves indicate magnetization rotation rather than nucleation of reverse domains is important in the magnetization process. A Brown's equation analysis of the coercivity as a function of temperature allowed us to compare the rapidly annealed and 20 min annealed samples. This analysis suggests that rapid annealing gives higher quality crystalline grains than the 20 min annealed sample leading to the observed large coercivity in the rapidly annealed samples

The performance studies of DKDP crystals grown by a rapid horizontal growth method

Science.gov (United States)

Xie, Xiaoyi; Qi, Hongji; Wang, Bin; Wang, Hu; Chen, Duanyang; Shao, Jianda

2018-04-01

A deuterated potassium dihydrogen phosphate (DKDP) crystal with about 70% deuterium level was grown by a rapid horizontal growth method with independent design equipment, which includes a continuous filtration system. The cooling program during crystal growth was designed according to a self-developed software to catch the size of growing crystal in real time. The crystal structure, optical performance and laser induced damage threshold (LIDT) of this DKDP crystal were investigated in this paper. The deuterium concentration of the crystal was confirmed by the neutron diffraction technique, which was effective and available in determining a complete range of deuteration level. The dielectric property was measured to evaluate the perfection of the lattice. The transmittance and LIDT were carried out further to evaluate the optical and functional properties of this DKDP crystal grown in the rapid horizontal growth technique. All of the detailed characterization for DKDP figured out that the 70% deuterated KDP crystal grown in this way had relatively good qualities.

The growing fibroadenoma

International Nuclear Information System (INIS)

Sanders, Linda M; Sara, Rana

2015-01-01

Fibroadenomas (FAs) are the most common tumors of the breast clinically and pathologically in adolescent and young women but may be discovered at any age. With increasing use of core biopsy rather than excision for diagnosis, it is now commonplace to follow these lesions with imaging. To assess the incidence of epithelial abnormalities (atypia, in situ or invasive, ductal or lobular malignancies) in FAs diagnosed by core biopsy and to re-evaluate the management paradigm for any growing FA. A retrospective review of the senior author’s pathology results over 19 years identified 2062 nodular FAs (biopsied by ultrasound or stereotactic guidance). Eighty-three core biopsied FAs were identified which subsequently enlarged. Twelve of 2062 of core biopsied nodules demonstrated atypia, in situ, or invasive malignancy (ductal or lobular) within or adjacent to the FA (0.58%). Eighty-three FAs enlarged and underwent either surgical excision (n = 65), repeat core biopsy (n = 9), or imaging follow-up (n = 9). The incidence of atypia, in situ or invasive malignancy was 0/83 (0%). Two enlarging FAs were subsequently surgically diagnosed as benign phyllodes tumors (PT). Malignancy in or adjacent to a core biopsied FA is rare. The risk of cancer in a growing FA is even rarer; none were present in our series. FAs with abnormal epithelial abnormalities require excision. Otherwise, FAs without epithelial abnormality diagnosed by core biopsy need no specific follow-up considering the negligible incidence of conversion to malignancy. The breast interventionalist must know how to manage discordant pathology results

Determination of the mechanical properties of solid and cellular polymeric dosage forms by diametral compression.

Science.gov (United States)

Blaesi, Aron H; Saka, Nannaji

2016-07-25

At present, the immediate-release solid dosage forms, such as the oral tablets and capsules, are granular solids. They release drug rapidly and have adequate mechanical properties, but their manufacture is fraught with difficulties inherent in processing particulate matter. Such difficulties, however, could be overcome by liquid-based processing. Therefore, we have recently introduced polymeric cellular (i.e., highly porous) dosage forms prepared from a melt process. Experiments have shown that upon immersion in a dissolution medium, the cellular dosage forms with polyethylene glycol (PEG) as excipient and with predominantly open-cell topology disintegrate by exfoliation, thus enabling rapid drug release. If the volume fraction of voids of the open-cell structures is too large, however, their mechanical strength is adversely affected. At present, the common method for determining the tensile strength of brittle, solid dosage forms (such as select granular forms) is the diametral compression test. In this study, the theory of diametral compression is first refined to demonstrate that the relevant mechanical properties of ductile and cellular solids (i.e., the elastic modulus and the yield strength) can also be extracted from this test. Diametral compression experiments are then conducted on PEG-based solid and cellular dosage forms. It is found that the elastic modulus and yield strength of the open-cell structures are about an order of magnitude smaller than those of the non-porous solids, but still are substantially greater than the stiffness and strength requirements for handling the dosage forms manually. This work thus demonstrates that melt-processed polymeric cellular dosage forms that release drug rapidly can be designed and manufactured to have adequate mechanical properties. Copyright © 2016. Published by Elsevier B.V.

COMPLEX GAS KINEMATICS IN COMPACT, RAPIDLY ASSEMBLING STAR-FORMING GALAXIES

Energy Technology Data Exchange (ETDEWEB)

Amorin, R.; Vilchez, J. M.; Perez-Montero, E. [Instituto de Astrofisica de Andalucia-CSIC, Glorieta de la Astronomia S/N, E-18008 Granada (Spain); Haegele, G. F.; Firpo, V. [Facultad de Ciencias Astronomicas y Geofisicas, Universidad de la Plata, Paseo del Bosque S/N, 1900 La Plata (Argentina); Papaderos, P., E-mail: amorin@iaa.es [Centro de Astrofisica and Faculdade de Ciencias, Universidade do Porto, Rua das Estrelas, 4150-762 Porto (Portugal)

2012-08-01

Deep, high-resolution spectroscopic observations have been obtained for six compact, strongly star-forming galaxies at redshift z {approx} 0.1-0.3, most of them also known as green peas. Remarkably, these galaxies show complex emission-line profiles in the spectral region including H{alpha}, [N II] {lambda}{lambda}6548, 6584, and [S II] {lambda}{lambda}6717, 6731, consisting of the superposition of different kinematical components on a spatial extent of few kiloparsecs: a very broad line emission underlying more than one narrower component. For at least two of the observed galaxies some of these multiple components are resolved spatially in their two-dimensional spectra, whereas for another one a faint detached H{alpha} blob lacking stellar continuum is detected at the same recessional velocity {approx}7 kpc away from the galaxy. The individual narrower H{alpha} components show high intrinsic velocity dispersion ({sigma} {approx} 30-80 km s{sup -1}), suggesting together with unsharped masking Hubble Space Telescope images that star formation proceeds in an ensemble of several compact and turbulent clumps, with relative velocities of up to {approx}500 km s{sup -1}. The broad underlying H{alpha} components indicate in all cases large expansion velocities (full width zero intensity {>=}1000 km s{sup -1}) and very high luminosities (up to {approx}10{sup 42} erg s{sup -1}), probably showing the imprint of energetic outflows from supernovae. These intriguing results underline the importance of green peas for studying the assembly of low-mass galaxies near and far.

ON EFFECTIVENESS OF NEW FORM OF FUSAFUNGINE

Directory of Open Access Journals (Sweden)

G.L. Balyasinskaya

2010-01-01

Full Text Available Author discusses advantages of topical antibacterial treatment of inflammatory diseases of upper airways. Advantages of new form of Bioparox (fusafungine are rapid effect from the 1st day of treatment, optimized dosing regimen, additional children’s attachment for nose and increased adherence to therapy. Key words: sinusitis, acute respiratory infections, pharyngitis, treatment, fusafungine.(Voprosy sovremennoi pediatrii — Current Pediatrics. 2010;9(5:107-110

How cores grow by pebble accretion. I. Direct core growth

Science.gov (United States)

Brouwers, M. G.; Vazan, A.; Ormel, C. W.

2018-03-01

Context. Planet formation by pebble accretion is an alternative to planetesimal-driven core accretion. In this scenario, planets grow by the accretion of cm- to m-sized pebbles instead of km-sized planetesimals. One of the main differences with planetesimal-driven core accretion is the increased thermal ablation experienced by pebbles. This can provide early enrichment to the planet's envelope, which influences its subsequent evolution and changes the process of core growth. Aims: We aim to predict core masses and envelope compositions of planets that form by pebble accretion and compare mass deposition of pebbles to planetesimals. Specifically, we calculate the core mass where pebbles completely evaporate and are absorbed before reaching the core, which signifies the end of direct core growth. Methods: We model the early growth of a protoplanet by calculating the structure of its envelope, taking into account the fate of impacting pebbles or planetesimals. The region where high-Z material can exist in vapor form is determined by the temperature-dependent vapor pressure. We include enrichment effects by locally modifying the mean molecular weight of the envelope. Results: In the pebble case, three phases of core growth can be identified. In the first phase (Mcore mixes outwards, slowing core growth. In the third phase (Mcore > 0.5M⊕), the high-Z inner region expands outwards, absorbing an increasing fraction of the ablated material as vapor. Rainout ends before the core mass reaches 0.6 M⊕, terminating direct core growth. In the case of icy H2O pebbles, this happens before 0.1 M⊕. Conclusions: Our results indicate that pebble accretion can directly form rocky cores up to only 0.6 M⊕, and is unable to form similarly sized icy cores. Subsequent core growth can proceed indirectly when the planet cools, provided it is able to retain its high-Z material.

The microdose rapid 14C urea breath test compares well with the original rapid 14 breath test

International Nuclear Information System (INIS)

Bellon, M.S.; Bartholomeusz, F.D.L.; Chatterton, B.E.

2000-01-01

Full text: The 14 C urea breath test (CUBT) is a sensitive test used in the detection of H. pylori infection. The rapid 14 CUBT using 185 KBq of 14 C urea showed a sensitivity of 100% when tested in 36 patients. The aim of this study was to compare the results of the 14 CUBT performed following the ingestion of 37KBq microdose 14 C urea capsule (Bicapsule, Trimed) with the earlier method which uses 185 KBq 14 C urea. 19 patients (nine female age 21-52 yrs) were studied. All subjects first underwent a 14 CUBT with the microdose capsule and a single 15 minute post ingestion sample. An hour later the test was repeated but with a dose of 185 KBq 14 C urea in liquid form. A normal result was taken as 2 = 0.92). This is shown above. The Rapid 14 CUBT performed following the microdose capsule whilst reducing patient radiation exposure is an accurate test for the detection of H. pylori. Copyright (2000) The Australian and New Zealand Society of Nuclear Medicine Inc

Method of cutting steeply falling coal beds. [Bacteria, which only grow on methane, are injected into the coal bed and form low viscosity polysaccharides: as a result the coal collapses into the haulage gallery and is hauled away

Energy Technology Data Exchange (ETDEWEB)

Gretsinger, B Ye; Chernyshenko, D V; Levin, A D; Malashenko, Yu R; Shinkovskiy, V A; Shurova, Z P; Volkov, V I

1982-01-01

The purpose of the invention is to reduce outlays for collapse and output of coal by creating artificial cavities of sliding along the coal bed in the surrounding rocks. This goal is achieved because in the well drilled in the bed for the entire height of the level, a suspension of cells of methane-oxidizing microorganisms is injected. The methane-oxidizing microorganisms used are, for example, the thermophilic culture Methylococcus thermophilus of strains ShP which grow at 45-65/sup 0/ C, or the mesophilic culture Methanomonas rubna of strains 15 Sh growing at 20-37/sup 0/ C. As a result of the vital activity of these cultures, polysaccharides are formed with viscosity of 5-7 and 3-4 St respectively. The mine pressure disrupts the blocks between the wells, and the outline section of the steeply dropping coal bed, being destroyed, slides on the products of vital activity of the microorganisms to the haulage gallery. Then the coal drops on cross cuts to the field gallery through which it is transported. Studies established that the only coal substrate which is suitable for growth of these microorganism cultures is methane. The synthesis of one g of absolutely dry substance of these microorganism requires 1.78 g of methane and 4.7 g of oxygen. The cultures are resistant to hydrostatic pressure from 20 to 150 atm and short-term pressure of gradient drops which occur during injection of the cellular suspension into the coal bed. They are filtered through the coal with preservation of the oxidizing and reproductive properties and are cultivated on the methane contained in the bed and form considerable number of exopolysaccarides. The polysaccarides weaken the bond between the bed and the surrounding rocks and serve as a unique lubricant promoting the sliding towards the haulage gallery of the coal blocks destroyed by mine pressure.

Administration of Caffeine in Alternate Forms

OpenAIRE

Wickham, Kate A.; Spriet, Lawrence L.

2018-01-01

There has been recent interest in the ergogenic effects of caffeine delivered in low doses (~ 200 mg or ~ 3 mg/kg body mass) and administered in forms other than capsules, coffee and sports drinks, including chewing gum, bars, gels, mouth rinses, energy drinks and aerosols. Caffeinated chewing gum is absorbed quicker through the buccal mucosa compared with capsule delivery and absorption in the gut, although total caffeine absorption over time is not different. Rapid absorption may be importa...

Rapid eye movement sleep behavior disorder--diagnostik, årsager og behandling

DEFF Research Database (Denmark)

Zoetmulder, Marielle; Jennum, Poul Jørgen

2009-01-01

Rapid eye movement (REM) sleep behaviour disorder (RBD) is characterized by loss of REM sleep and related electromyographic atonia with marked muscular activity and dream enactment behaviour. RBD is seen in 0.5% of the population. It occurs in an idiopathic form and secondarily to medical and neu...

Lighting during grow-out and Salmonella in broiler flocks

Directory of Open Access Journals (Sweden)

Bailey Richard H

2010-06-01

Full Text Available Abstract Background Lighting is used during conventional broiler grow-out to modify bird behaviour to reach the goals of production and improve bird welfare. The protocols for lighting intensity vary. In a field study, we evaluated if the lighting practices impact the burden of Salmonella in broiler flocks. Methods Conventional grow-out flocks reared in the states of Alabama, Mississippi and Texas, USA in 2003 to 2006 were sampled 1 week before harvest (n = 58 and upon arrival for processing (n = 56 by collecting feathered carcass rinsate, crop and one cecum from each of 30 birds, and during processing by collecting rinsate of 30 carcasses at pre-chilling (n = 56 and post-chilling points (n = 54. Litter samples and drag swabs of litter were collected from the grow-out houses after bird harvest (n = 56. Lighting practices for these flocks were obtained with a questionnaire completed by the growers. Associations between the lighting practices and the burden of Salmonella in the flocks were tested while accounting for variation between the grow-out farms, their production complexes and companies. Results Longer relative duration of reduced lights during the grow-out period was associated with reduced detection of Salmonella on the exterior of birds 1 week before harvest and on the broiler carcasses at the post-chilling point of processing. In addition, starting reduced lights for ≥18 hours per day later in the grow-out period was associated with decreased detection of Salmonella on the exterior of broilers arriving for processing and in the post-harvest drag swabs of litter from the grow-out house. Conclusions The results of this field study show that lighting practices implemented during broiler rearing can impact the burden of Salmonella in the flock. The underlying mechanisms are likely to be interactive.

Rapid coagulation of polystyrene latex in a stopped-flow spectrophotometer

NARCIS (Netherlands)

Lichtenbelt, J.W.Th.; Pathmamanoharan, C.; Wiersema, P.H.

1974-01-01

With a stopped-flow method the rapid coagulation by electrolyte of several polystyrene latices is measured. By extrapolating back to zero time the initial process of two single particles forming a doublet is observed. We find an average rate constant ifk11 = 6.0 × 10−12 p−1 cm3 sec su−1 at 20°C,

Morphoelastic rods. Part I: A single growing elastic rod

KAUST Repository

Moulton, D.E.

2013-02-01

A theory for the dynamics and statics of growing elastic rods is presented. First, a single growing rod is considered and the formalism of three-dimensional multiplicative decomposition of morphoelasticity is used to describe the bulk growth of Kirchhoff elastic rods. Possible constitutive laws for growth are discussed and analysed. Second, a rod constrained or glued to a rigid substrate is considered, with the mismatch between the attachment site and the growing rod inducing stress. This stress can eventually lead to instability, bifurcation, and buckling. © 2012 Elsevier Ltd. All rights reserved.

Growing older in the context of needing geriatric assessment

DEFF Research Database (Denmark)

Esbensen, Bente Appel; Hvitved, Ida; Andersen, Hanne Elkjær

2016-01-01

significant and (v) considerations about the end of life as a component of growing older. The essence was defined as: illness essential for the experience of growing older and pointed to the experience of growing older that highlighted that experiencing illnesses and limitations served as reminders...... methodology. RESULTS: The results led to an overall essence and five themes. The five themes were identified: (i) considerations to avoid weakness, (ii) compensation for the inability to perform certain activities, (iii) aides - a symbol of freedom or limitation, (iv) lifestyle considered being particularly...

Morphoelastic rods. Part I: A single growing elastic rod

KAUST Repository

Moulton, D.E.; Lessinnes, T.; Goriely, A.

2013-01-01

A theory for the dynamics and statics of growing elastic rods is presented. First, a single growing rod is considered and the formalism of three-dimensional multiplicative decomposition of morphoelasticity is used to describe the bulk growth of Kirchhoff elastic rods. Possible constitutive laws for growth are discussed and analysed. Second, a rod constrained or glued to a rigid substrate is considered, with the mismatch between the attachment site and the growing rod inducing stress. This stress can eventually lead to instability, bifurcation, and buckling. © 2012 Elsevier Ltd. All rights reserved.

The method of rapid design of the folding bridge based on floating supports

OpenAIRE

Jan Marszałek; Mieczysław Piechota

2016-01-01

The article includes a methodology for the rapid design of the folding bridge based on floating supports. This methodology includes an analysis of the possibilities of using blocks from the park pontoon PP-64 as a support for the floating folding DMS-65 bridge, built as a tem-porary crossing for civilian application. The analysis was carried out for the bridge loaded with a moving vehicle. The results of this analysis have been developed in the form of nomograms that enable rapid development ...

Rapid formation and flexible expression of memories of subliminal word pairs.

Science.gov (United States)

Reber, Thomas P; Henke, Katharina

2011-01-01

Our daily experiences are incidentally and rapidly encoded as episodic memories. Episodic memories consist of numerous associations (e.g., who gave what to whom where and when) that can be expressed flexibly in new situations. Key features of episodic memory are speed of encoding, its associative nature, and its representational flexibility. Another defining feature of human episodic memory has been consciousness of encoding/retrieval. Here, we show that humans can rapidly form associations between subliminal words and minutes later retrieve these associations even if retrieval words were conceptually related to, but different from encoding words. Because encoding words were presented subliminally, associative encoding, and retrieval were unconscious. Unconscious association formation and retrieval were dependent on a preceding understanding of task principles. We conclude that key computations underlying episodic memory - rapid encoding and flexible expression of associations - can operate outside consciousness.

Obesity and cardiovascular disease in developing countries: a growing problem and an economic threat.

Science.gov (United States)

Raymond, Susan U; Leeder, Stephen; Greenberg, Henry M

2006-03-01

This review examines the rise of risk factors for cardiovascular disease, especially obesity, in developing countries and the implications for both health and economics. In the majority of developing countries fertility and infant and child mortality have fallen markedly, and life expectancies have increased. Rapid urbanization, falling food prices, and globalization of economies have contributed to an increase in risk factors for chronic disease. Recent work indicates that the prevalence of these risk factors, including obesity, is rising faster than the historical experience of the West. The transition is affecting women in particular, and increases in risk factors are more marked among lower incomes in growing economies than among the wealthy. Rather than the stereotypical problem of the rich, chronic disease is now a problem for the poor. Significant research in this area of global health has only been undertaken in the last decade. Additional field research is needed in every dimension of the transition, both to document the problem itself and to determine its economic and societal impact and cost effective responses. Two critical factors are virtually absent from existing work and should be emphasized. First, the impact of rising risk factors for, and mortality from, cardiovascular disease in the work force may imply a growing threat to continued economic progress. Second, because risk factor reduction requires society-wide strategies, broad public-private coalitions will be needed to mobilize sectors beyond healthcare.

Growing Crystals on the Ceiling.

Science.gov (United States)

Christman, Robert A.

1980-01-01

Described is a method of studying growing crystals in a classroom utilizing a carrousel projector standing vertically. A saturated salt solution is placed on a slide on the lens of the projector and the heat from the projector causes the water to evaporate and salt to crystalize. (Author/DS)

Exploring Classroom Hydroponics. Growing Ideas.

Science.gov (United States)

National Gardening Association, Burlington, VT.

Growing Ideas, the National Gardening Association's series for elementary, middle, and junior high school educators, helps teachers engage students in using plants and gardens as contexts for developing a deeper, richer understanding of the world around them. This volume's focus is on hydroponics. It presents basic hydroponics information along…

COFFEE GROWING AREAS OF ETHIOPIA"

African Journals Online (AJOL)

accelerated economic growth, part of which is hoped to be achieved via increased ... at the Fifth International Conference on the Ethiopian Economy held at the United ... Samuel and Ludi: Agricultural commercialisation in coffee growing areas. ... Ethiopia produces and exports one of the best fighland coffees in the world.

Agglomerative clustering of growing squares

NARCIS (Netherlands)

Castermans, Thom; Speckmann, Bettina; Staals, Frank; Verbeek, Kevin; Bender, M.A.; Farach-Colton, M.; Mosteiro, M.A.

2018-01-01

We study an agglomerative clustering problem motivated by interactive glyphs in geo-visualization. Consider a set of disjoint square glyphs on an interactive map. When the user zooms out, the glyphs grow in size relative to the map, possibly with different speeds. When two glyphs intersect, we wish

Two-dimensional time-resolved x-ray diffraction study of dual phase rapid solidification in steels

Science.gov (United States)

Yonemura, Mitsuharu; Osuki, Takahiro; Terasaki, Hidenori; Komizo, Yuichi; Sato, Masugu; Toyokawa, Hidenori; Nozaki, Akiko

2010-01-01

The high intensity heat source used for fusion welding creates steep thermal gradients of 100 °C/s from 1800 °C. Further, the influence of preferred orientation is important for the observation of a directional solidification that follows the dendrite growth along the ⟨100⟩ direction toward the moving heat source. In the present study, we observed the rapid solidification of weld metal at a time resolution of 0.01-0.1 s by a two-dimensional time-resolved x-ray diffraction (2DTRXRD) system for real welding. The diffraction rings were dynamically observed by 2DTRXRD with synchrotron energy of 18 keV while the arc passes over the irradiation area of the x-rays. The arc power output was 10 V-150 A, and the scan speed of the arc was 1.0 mm/s. The temperature rise in instruments was suppressed by a water-cooled copper plate under the specimen. Further, the temperature distribution of the weld metal was measured by a thermocouple and correlated with the diffraction patterns. Consequently, solidification and solid phase transformation of low carbon steels and stainless steels were observed during rapid cooling by 2DTRXRD. In the low carbon steel, the microstructure is formed in a two step process, (i) formation of crystallites and (ii) increase of crystallinity. In stainless steel, the irregular interface layer of δ/γ in the quenched metal after solidification is expected to show the easy movement of dendrites at a lower temperature. In carbide precipitation stainless steel, it is easy for NbC to grow on δ phase with a little undercooling. Further, a mistlike pattern, which differs from the halo pattern, in the fusion zone gave some indication of the possibilities to observe the nucleation and the early solidification by 2DTRXRD.

Effects of growing location on the production of main active components and antioxidant activity of Dasiphora fruticosa (L.) Rydb. by chemometric methods.

Science.gov (United States)

Liu, Wei; Wang, Dongmei; Hou, Xiaogai; Yang, Yueqin; Xue, Xian; Jia, Qishi; Zhang, Lixia; Zhao, Wei; Yin, Dongxue

2018-05-17

Traditional Chinese medicine (TCM) plays a very important role in the health system of China. The content and activity of active component are main indexes that evaluate the quality of TCM, however they may vary with environmental factors in their growing locations. In this study, effects of environmental factors on the contents of active components and antioxidant activity of Dasiphora fruticosa from the five main production areas of China were investigated. The contents of tannin, total flavonoid and rutin were determined and varied within the range of 7.65-10.69%, 2.30-5.39% and 0.18-0.81%, respectively. Antioxidant activity was determined by DPPH assay, with the DPPH IC 50 values ranged from 8.791 to 32.534μg mL -1 . In order to further explore the cause of these significant geographical variations, the chemometric methods including correlation analysis, principal component analysis, gray correlation analysis, and path analysis were conducted. The results showed environmental factors had significant effect on the active component contents and antioxidant activity. Rapidly available phosphorus (RAP) and rapidly available nitrogen (RAN) were common dominant factors, and a significant positive correlation was observed between RAP and active components and antioxidant activity (Pcomponents and strong antioxidant activity, Bange in Tibet and Geermu in Qinghai Province was selected as a favorable growing location, respectively. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Urban form and fitness: Towards a space-morphological approach to general urban resilience

OpenAIRE

Forgaci, C.; Van Timmeren, A.

2014-01-01

Assessment is one of the greatest challenges of urban resilience research. The difficulty of this task arises from the increasing complexity of urban environments and from the unpredictability of external changes, two trends that have raised environmental awareness and, consequently, led to a growing debate on the relationship between city and nature. We join this debate by looking at urban resilience through the lens of urban form. We refer to urban form as a product of the continuous tensio...

Expectation of rapid prototyping; Rapiddo/puroto taipingu gijutsu no tenbo

Energy Technology Data Exchange (ETDEWEB)

Kishinami, T. [Hokkaido Univ., Sapporo (Japan). Faculty of Engineering

1997-04-05

Prototyping can be defined as the physical and imaginable product model formation process used for verification of production guideline of functional component. Rapid prototyping means the combination of technology forming directly the physical model from CAD data. It is a summarization of technology composed of design assistant technology, model production technology, and integration technology. In 1980`s, 3D System Corp. proposed the stereo lithography. Since then its research and development were promptly carried out as for the technology of rapid formation o physical model. Resultantly, it became possible to fabricate the model designed by the three dimensional CAD within a day using a rapid prototyping system. This can be roughly divided into the following three: (1) stereo lithography, (2) method of melting and hardening by laser irradiation of the powder plastic and wax, (3) 3D-printing method consisting of selectively coating of ceramic powder with binder. 4 refs., 3 figs.

Rapid Onset Acute Epiglottitis Leading to Negative Pressure Pulmonary Edema

Directory of Open Access Journals (Sweden)

V Saraswat

2007-01-01

Full Text Available Pulmonary edema is a potentially life-threatening complication of acute airway obstruction. It develops rapidly, without warning, in young healthy individuals. Two forms of post-obstructive pulmonary edema (POPE (also known as negative pressure pulmonary edema, NPPE have been identified. POPE I follows sudden, severe upper airway obstruction. POPE II occurs following surgical relief of chronic upper airway obstruction. Treatment for both is supportive. Full and rapid recovery can be expected with appropriate management. A case report of a middle aged man with acute onset epiglottitis who developed negative pressure pulmonary edema after intubation is presented. The report includes a brief discussion on etiology, clinical features and management dilemma of acute upper airway obstruction.

Growing ‘Smart’? Urbanization Processes in the Pune Urban Agglomeration

Directory of Open Access Journals (Sweden)

Carsten Butsch

2017-12-01

Full Text Available The Indian city of Pune witnessed rapid growth and deep transformation processes in the last three decades. This paper assesses past developments and recent structures and processes against the concept of urban sustainability. Following an overview of the historical development, the dimensions of sustainability are discussed separately, based on empirical findings. Urban growth puts enormous pressure on Pune’s land and water resources, changing the ecology of the area. The increasing water demand of Pune’s growing population competes with growing energy and water demands. An assessment of future climate change impacts indicates that the storage capacity of the reservoirs is more frequently not met during the rainy season. In addition, extreme dry years can aggravate the effects of land use change on water resources in the future. The city’s growth and especially the large in-migration has also changed Pune’s social fabric significantly. Wealth is distributed unevenly in the city and social disparities can be observed along two fault lines, namely along classes and caste groups. The population development and the increasing socioeconomic polarization are linked to the economic development of the city. Pune’s formal economy has a robust base. However, as in many cities of the Global South, the informal economy is the most relevant source of income for large parts of the population. Pune’s development is challenged by informality, poor infrastructure and inadequate planning and governance. Recently new approaches towards urban renewal and smart city development were launched. These new approaches aim at overcoming blockades in the traditional planning. A special challenge for urban planning is the transformation of urban fringe areas of the city, as this process is currently taking place in an unsustainable manner. The paper concludes that urban development has to become holistic, integrative and participative and should abandon the

Growing Up of Autonomous Agents: an Emergent Phenomenon

Science.gov (United States)

Morgavi, Giovanna; Marconi, Lucia

2008-10-01

A fundamental research challenge is the design of robust artifacts that are capable of operating under changing environments and noisy input, and yet exhibit the desired behavior and response time. These systems should be able to adapt and learn how to react to unforeseen scenarios as well as to display properties comparable to biological entities. The turn to nature has brought us many unforeseen great concepts. Biological systems are able to handle many of these challenges with an elegance and efficiency still far beyond current human artifacts. A living artifact grows up when its capabilities, abilities/knowledge, shift to a further level of complexity, i.e. the complexity rank of its internal capabilities performs a step forward. In the attempt to define an architecture for autonomous growing up agents [1]. We conducted an experiment on the abstraction process in children as natural parts of a cognitive system. We found that linguistic growing up involve a number of different trial processes. We identified a fixed number of distinct paths that were crossed by children. Once a given interpretation paths was discovered useless, they tried to follow another path, until the new meaning was emerging. This study generates suggestion about the evolutionary conditions conducive to the emergence of growing up in robots and provides guidelines for designing artificial evolutionary systems displaying spontaneous adaptation abilities. The importance of multi-sensor perception, motivation and emotional drives are underlined and, above all, the growing up insights shows similarities to emergent self-organized behaviors.

Genetics of monegenic forms of diabetes mellitus

Directory of Open Access Journals (Sweden)

Tamara Leonidovna Kuraeva

2011-03-01

Full Text Available It is universally recognized that autoimmune type 1 diabetes mellitus (DM is not the only form of this disease in children. Increasingly more children andadolescents present with DM2, MODY, and rarer syndromal forms of DM. The actual prevalence of DM other than DM1 in children and adolescentsis unknown but may be estimated at 10%. Despite rare occurrence of genetic syndromes, they collectively account for almost 5% of DM cases amongchildren. The rapid upgrowth of molecular biology opens up a wide range of possibilities for designating various symptom complexes as nosologically selfconsistentforms. New genetic syndromes associated with DM are annually described. It is important both to adequately identify and treat manifestationsand complications of these syndromes in children and to provide relevant medico-genetic counseling and recommendations to the parents.Key words: non-immune diabetes mellitus, MODY, Wolfram syndrome, neonatal, syndromal forms

A slow-releasing form of prostacyclin agonist (ONO1301SR) enhances endogenous secretion of multiple cardiotherapeutic cytokines and improves cardiac function in a rapid-pacing-induced model of canine heart failure.

Science.gov (United States)

Shirasaka, Tomonori; Miyagawa, Shigeru; Fukushima, Satsuki; Saito, Atsuhiro; Shiozaki, Motoko; Kawaguchi, Naomasa; Matsuura, Nariaki; Nakatani, Satoshi; Sakai, Yoshiki; Daimon, Takashi; Okita, Yutaka; Sawa, Yoshiki

2013-08-01

Cardiac functional deterioration in dilated cardiomyopathy (DCM) is known to be reversed by intramyocardial up-regulation of multiple cardioprotective factors, whereas a prostacyclin analog, ONO1301, has been shown to paracrinally activate interstitial cells to release a variety of protective factors. We here hypothesized that intramyocardial delivery of a slow-releasing form of ONO1301 (ONO1301SR) might activate regional myocardium to up-regulate cardiotherapeutic factors, leading to regional and global functional recovery in DCM. ONO1301 elevated messenger RNA and protein level of hepatocyte growth factor, vascular endothelial growth factor, and stromal-derived factor-1 of normal human dermal fibroblasts in a dose-dependent manner in vitro. Intramyocardial delivery of ONO1301SR, which is ONO1301 mixed with polylactic and glycolic acid polymer (PLGA), but not that of PLGA only, yielded significant global functional recovery in a canine rapid pacing-induced DCM model, assessed by echocardiography and cardiac catheterization (n = 5 each). Importantly, speckle-tracking echocardiography unveiled significant regional functional recovery in the ONO1301-delivered territory, consistent to significantly increased vascular density, reduced interstitial collagen accumulation, attenuated myocyte hypertrophy, and reversed mitochondrial structure in the corresponding area. Intramyocardial delivery of ONO1301SR, which is a PLGA-coated slow-releasing form of ONO1301, up-regulated multiple cardiotherapeutic factors in the injected territory, leading to region-specific reverse left ventricular remodeling and consequently a global functional recovery in a rapid-pacing-induced canine DCM model, warranting a further preclinical study to optimize this novel drug-delivery system to treat DCM. Copyright © 2013 The American Association for Thoracic Surgery. Published by Mosby, Inc. All rights reserved.

The transformation of the journalistic field : discursive strategies and journalistic forms

NARCIS (Netherlands)

Broersma, Marcel

2010-01-01

The transformation of the journalistic field: discursive strategies and journalistic forms Journalism is transforming rapidly in the 21st century. This article argues that two complementary approaches offer Journalism Studies productive perspectives to study this process of change. Bourdieu's field

Substrates and irrigation levels for growing desert rose in pots

Directory of Open Access Journals (Sweden)

Ronan Carlos Colombo

Full Text Available ABSTRACT In the past decades, desert rose has become a very popular ornamental plant, especially among collectors, due to its exotic and sculptural forms. However, it has been grown on a commercial scale only recently, and little is known about how to best manage it as a container-grown plant, or even which potting medium (substrate to recommend. Therefore, the aim of this study was to investigate the interactions between potting media and irrigation levels for growing desert rose as a potted ornamental plant. The experiment was conducted in a greenhouse using a 6 x 2 factorial arrangement with six replications, six potting media and two irrigation levels. The mixes were characterized by measuring their physical properties, specifically the density and water retention capacity (WRC, as well as chemical properties, such as the pH and electrical conductivity (EC. After 210 days, plant growth and plant water consumption were evaluated and measured. A lower dry density for the vermiculite mixes was observed in comparison to that for the sand mixes. However, WRC ranged from 428 to 528 mL L-1 among the mixes, values considered close to ideal. In general, plant growth exhibited higher increases in mixes consisting of coconut fiber + sand or vermiculite, regardless of the irrigation level. Mixes of vermiculite + coconut fiber and sand + coconut fiber can be used to grow desert rose in pots, as long as irrigation is used to maintain the moisture content of the potting medium (mix between 60-70% and 80-90% of the WRC.

Energy Optimized Envelope for Cold Climate Indoor Agricultural Growing Center

Directory of Open Access Journals (Sweden)

Caroline Hachem-Vermette

2017-07-01

Full Text Available This paper presents a study of the development of building envelope design for improved energy performance of a controlled indoor agricultural growing center in a cold climate zone (Canada, 54° N. A parametric study is applied to analyze the effects of envelope parameters on the building energy loads for heating, cooling and lighting, required for maintaining growing requirement as obtained in the literature. A base case building of rectangular layout, incorporating conventionally applied insulation and glazing components, is initially analyzed, employing the EnergyPlus simulation program. Insulation and glazing parameters are then modified to minimize energy loads under assumed minimal lighting requirement. This enhanced design forms a base case for analyzing effects of additional design parameters—solar radiation control, air infiltration rate, sky-lighting and the addition of phase change materials—to obtain an enhanced design that minimizes energy loads. A second stage of the investigation applies a high lighting level to the enhanced design and modifies the design parameters to improve performance. A final part of the study is an investigation of the mechanical systems and renewable energy generation. Through the enhancement of building envelope components and day-lighting design, combined heating and cooling load of the low level lighting configuration is reduced by 65% and lighting load by 10%, relative to the base case design. Employing building integrated PV (BIPV system, this optimized model can achieve energy positive status. Solid Oxide Fuel Cells (SOFC, are discussed, as potential means to offset increased energy consumption associated with the high-level lighting model.

Nucleon Electromagnetic Form Factors

Energy Technology Data Exchange (ETDEWEB)

Marc Vanderhaeghen; Charles Perdrisat; Vina Punjabi

2007-10-01

There has been much activity in the measurement of the elastic electromagnetic proton and neutron form factors in the last decade, and the quality of the data has greatly improved by performing double polarization experiments, in comparison with previous unpolarized data. Here we review the experimental data base in view of the new results for the proton, and neutron, obtained at JLab, MAMI, and MIT-Bates. The rapid evolution of phenomenological models triggered by these high-precision experiments will be discussed, including the recent progress in the determination of the valence quark generalized parton distributions of the nucleon, as well as the steady rate of improvements made in the lattice QCD calculations.

Rapid response teams: qualitative analysis of their effectiveness.

Science.gov (United States)

Leach, Linda Searle; Mayo, Ann M

2013-05-01

Multidisciplinary rapid response teams focus on patients' emergent needs and manage critical situations to prevent avoidable deaths. Although research has focused primarily on outcomes, studies of the actual team effectiveness within the teams from multiple perspectives have been limited. To describe effectiveness of rapid response teams in a large teaching hospital in California that had been using such teams for 5 years. The grounded-theory method was used to discover if substantive theory might emerge from interview and/or observational data. Purposeful sampling was used to conduct in-person semistructured interviews with 17 key informants. Convenience sampling was used for the 9 observed events that involved a rapid response team. Analysis involved use of a concept or indicator model to generate empirical results from the data. Data were coded, compared, and contrasted, and, when appropriate, relationships between concepts were formed. Results Dimensions of effective team performance included the concepts of organizational culture, team structure, expertise, communication, and teamwork. Professionals involved reported that rapid response teams functioned well in managing patients at risk or in crisis; however, unique challenges were identified. Teams were loosely coupled because of the inconsistency of team members from day to day. Team members had little opportunity to develop relationships or team skills. The need for team training may be greater than that among teams that work together regularly under less time pressure to perform. Communication between team members and managing a crisis were critical aspects of an effective response team.

On growth and form of irregular coiled-shell of a terrestrial snail: Plectostoma concinnum (Fulton, 1901) (Mollusca: Caenogastropoda: Diplommatinidae).

Science.gov (United States)

Liew, Thor-Seng; Kok, Annebelle C M; Schilthuizen, Menno; Urdy, Severine

2014-01-01

The molluscan shell can be viewed as a petrified representation of the organism's ontogeny and thus can be used as a record of changes in form during growth. However, little empirical data is available on the actual growth and form of shells, as these are hard to quantify and examine simultaneously. To address these issues, we studied the growth and form of a land snail that has an irregularly coiled and heavily ornamented shell-Plectostoma concinnum. The growth data were collected in a natural growth experiment and the actual form changes of the aperture during shell ontogeny were quantified. We used an ontogeny axis that allows data of growth and form to be analysed simultaneously. Then, we examined the association between the growth and the form during three different whorl growing phases, namely, the regular coiled spire phase, the transitional constriction phase, and the distortedly-coiled tuba phase. In addition, we also explored the association between growth rate and the switching between whorl growing mode and rib growing mode. As a result, we show how the changes in the aperture ontogeny profiles in terms of aperture shape, size and growth trajectory, and the changes in growth rates, are associated with the different shell forms at different parts of the shell ontogeny. These associations suggest plausible constraints that underlie the three different shell ontogeny phases and the two different growth modes. We found that the mechanism behind the irregularly coiled-shell is the rotational changes of the animal's body and mantle edge with respect to the previously secreted shell. Overall, we propose that future study should focus on the role of the mantle and the columellar muscular system in the determination of shell form.

On growth and form of irregular coiled-shell of a terrestrial snail: Plectostoma concinnum (Fulton, 1901 (Mollusca: Caenogastropoda: Diplommatinidae

Directory of Open Access Journals (Sweden)

Thor-Seng Liew

2014-05-01

Full Text Available The molluscan shell can be viewed as a petrified representation of the organism’s ontogeny and thus can be used as a record of changes in form during growth. However, little empirical data is available on the actual growth and form of shells, as these are hard to quantify and examine simultaneously. To address these issues, we studied the growth and form of a land snail that has an irregularly coiled and heavily ornamented shell–Plectostoma concinnum. The growth data were collected in a natural growth experiment and the actual form changes of the aperture during shell ontogeny were quantified. We used an ontogeny axis that allows data of growth and form to be analysed simultaneously. Then, we examined the association between the growth and the form during three different whorl growing phases, namely, the regular coiled spire phase, the transitional constriction phase, and the distortedly-coiled tuba phase. In addition, we also explored the association between growth rate and the switching between whorl growing mode and rib growing mode. As a result, we show how the changes in the aperture ontogeny profiles in terms of aperture shape, size and growth trajectory, and the changes in growth rates, are associated with the different shell forms at different parts of the shell ontogeny. These associations suggest plausible constraints that underlie the three different shell ontogeny phases and the two different growth modes. We found that the mechanism behind the irregularly coiled-shell is the rotational changes of the animal’s body and mantle edge with respect to the previously secreted shell. Overall, we propose that future study should focus on the role of the mantle and the columellar muscular system in the determination of shell form.

Rapid Evaporation of microbubbles

Science.gov (United States)

Gautam, Jitendra; Esmaeeli, Asghar

2008-11-01

When a liquid is heated to a temperature far above its boiling point, it evaporates abruptly. Boiling of liquid at high temperatures can be explosive and destructive, and poses a potential hazard for a host of industrial processes. Explosive boiling may occur if a cold and volatile liquid is brought into contact with a hot and non-volatile liquid, or if a liquid is superheated or depressurized rapidly. Such possibilities are realized, for example, in the depressurization of low boiling point liquefied natural gas (LNG) in the pipelines or storage tanks as a result of a leak. While boiling of highly heated liquids can be destructive at macroscale, the (nearly) instantaneous pace of the process and the release of large amount of kinetic energy make the phenomena extremely attractive at microscale where it is possible to utilize the released energy to derive micromechanical systems. For instance, there is currently a growing interest in micro-explosion of liquid for generation of micro bubbles for actuation purposes. The aim of the current study is to gain a fundamental understanding of the subject using direct numerical simulations. In particular, we seek to investigate the boundary between stable and unstable nucleus growth in terms of the degree of liquid superheat and to compare the dynamics of unstable and stable growth.

Additive manufacturing technologies 3D printing, rapid prototyping, and direct digital manufacturing

CERN Document Server

Gibson, Ian; Stucker, Brent

2015-01-01

This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given,  beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered  

Biological aspects and candidate biomarkers for rapid-cycling in bipolar disorder: A systematic review.

Science.gov (United States)

Buoli, Massimiliano; Serati, Marta; Altamura, A Carlo

2017-12-01

Rapid-cycling bipolar disorder represents a frequent severe subtype of illness which has been associated with poor response to pharmacological treatment. Aim of the present article is to provide an updated review of biological markers associated with rapid-cycling bipolar disorder. A research in the main database sources has been conducted to identify relevant papers about the topic. Rapid-cycling bipolar disorder patients seem to have a more frequent family history for bipolar spectrum disorders (d range: 0.44-0.74) as well as an increased susceptibility to DNA damage or mRNA hypo-transcription (d range: 0.78-1.67) than non rapid-cycling ones. A susceptibility to hypothyroidism, which is exacerbated by treatment with lithium, is possible in rapid-cycling bipolar disorder, but further studies are needed to draw definitive conclusions. Rapid-cycling bipolar patients might have more insuline resistance as well as more severe brain changes in frontal areas (d range: 0.82-0.94) than non rapid-cycling ones. Many questions are still open about this topic. The first is whether the rapid-cycling is inheritable or is more generally the manifestation of a severe form of bipolar disorder. The second is whether some endocrine dysfunctions (diabetes and hypothyroidism) predispose to rapid-cycling or rapid-cycling is the consequence of drug treatment or medical comorbidities (e.g. obesity). Copyright © 2017 Elsevier B.V. All rights reserved.

Growing an Emerging Research University

Science.gov (United States)

Birx, Donald L.; Anderson-Fletcher, Elizabeth; Whitney, Elizabeth

2013-01-01

The emerging research college or university is one of the most formidable resources a region has to reinvent and grow its economy. This paper is the first of two that outlines a process of building research universities that enhance regional technology development and facilitate flexible networks of collaboration and resource sharing. Although the…

Rapid mental computation system as a tool for algorithmic thinking of elementary school students development

OpenAIRE

Ziatdinov, Rushan; Musa, Sajid

2013-01-01

In this paper, we describe the possibilities of using a rapid mental computation system in elementary education. The system consists of a number of readily memorized operations that allow one to perform arithmetic computations very quickly. These operations are actually simple algorithms which can develop or improve the algorithmic thinking of pupils. Using a rapid mental computation system allows forming the basis for the study of computer science in secondary school.

How to Grow Old

Institute of Scientific and Technical Information of China (English)

Bertrand Russell

2008-01-01

<正>1. In spite of the title, this article will really be on how not to grow old, which, at my time of life, is a much more important subject. My first advice would be to choose your ancestors carefully. Although both my parents died young, I have done well in this respect as regards my other ancestors. My maternal grandfather, it is true, was cut off in the flower of his youth at the age of sixty-seven,

Rapid Development, Build-Out Ratio and Subsequent Neighborhood Turnover

Directory of Open Access Journals (Sweden)

George O. Rogers

2018-04-01

Full Text Available Neighborhood development is primarily comprised of structural elements that include design elements, nearby amenities and ecological attributes. This paper assumes that the process of development itself also influences the character of the neighborhood—specifically, that the rate of development and build-out ratio influences neighborhood turnover. While the structural components clearly set a framework for development, the process of development expresses the character of the neighborhood in subtle messages conveyed through the market. Neighborhoods in the rapidly growing university town of College Station, Texas are analyzed in terms of neighborhood design, nearby amenities and landscape ecology components. Residential property records are used to characterize each neighborhood in terms of the rate of development and current build-out ratio. The multivariate analysis indicates that the development rate increases subsequent neighborhood turnover rates while the build-out ratio decreases it.

Three-Fingered RAVERs: Rapid Accumulation of Variations in Exposed Residues of Snake Venom Toxins

Science.gov (United States)

Sunagar, Kartik; Jackson, Timothy N. W.; Undheim, Eivind A. B.; Ali, Syed. A.; Antunes, Agostinho; Fry, Bryan G.

2013-01-01

Three-finger toxins (3FTx) represent one of the most abundantly secreted and potently toxic components of colubrid (Colubridae), elapid (Elapidae) and psammophid (Psammophiinae subfamily of the Lamprophidae) snake venom arsenal. Despite their conserved structural similarity, they perform a diversity of biological functions. Although they are theorised to undergo adaptive evolution, the underlying diversification mechanisms remain elusive. Here, we report the molecular evolution of different 3FTx functional forms and show that positively selected point mutations have driven the rapid evolution and diversification of 3FTx. These diversification events not only correlate with the evolution of advanced venom delivery systems (VDS) in Caenophidia, but in particular the explosive diversification of the clade subsequent to the evolution of a high pressure, hollow-fanged VDS in elapids, highlighting the significant role of these toxins in the evolution of advanced snakes. We show that Type I, II and III α-neurotoxins have evolved with extreme rapidity under the influence of positive selection. We also show that novel Oxyuranus/Pseudonaja Type II forms lacking the apotypic loop-2 stabilising cysteine doublet characteristic of Type II forms are not phylogenetically basal in relation to other Type IIs as previously thought, but are the result of secondary loss of these apotypic cysteines on at least three separate occasions. Not all 3FTxs have evolved rapidly: κ-neurotoxins, which form non-covalently associated heterodimers, have experienced a relatively weaker influence of diversifying selection; while cytotoxic 3FTx, with their functional sites, dispersed over 40% of the molecular surface, have been extremely constrained by negative selection. We show that the a previous theory of 3FTx molecular evolution (termed ASSET) is evolutionarily implausible and cannot account for the considerable variation observed in very short segments of 3FTx. Instead, we propose a theory of

Blueprint and Approach to Grow Revenue in Small Technology Companies

Directory of Open Access Journals (Sweden)

Tony Bailetti

2010-05-01

Full Text Available This article examines a new approach to grow the revenue of small technology companies and technology startups. We name this new approach the business ecosystem approach. The article is organized into five sections. The first section provides a blueprint to grow revenue and an inventory of growth formulas that top management teams of small technology companies and founders of startups find useful. The second section briefly defines business ecosystems, keystones and platforms. The third section describes the business ecosystem approach to grow the revenue of small technology companies and technology startups. It compares the traditional and business ecosystem approaches to growing revenue; identifies when the business ecosystem approach works better than the traditional approach; explains what small companies and startups need to do to grow revenue using the business ecosystem approach; and describes the benefits and risks of implementing the business ecosystem approach. The fourth section compares three approaches to growing revenue and highlights the differences between i business ecosystems and development communities and ii the business ecosystem approach and outsourcing. The fifth section identifies the key decisions a small technology company or technology startup needs to make to become the keystone that anchors a business ecosystem.

CRY2 is associated with rapid cycling in bipolar disorder patients.

Directory of Open Access Journals (Sweden)

Louise K Sjöholm

2010-09-01

Full Text Available Bipolar disorder patients often display abnormalities in circadian rhythm, and they are sensitive to irregular diurnal rhythms. CRY2 participates in the core clock that generates circadian rhythms. CRY2 mRNA expression in blood mononuclear cells was recently shown to display a marked diurnal variation and to respond to total sleep deprivation in healthy human volunteers. It was also shown that bipolar patients in a depressive state had lower CRY2 mRNA levels, nonresponsive to total sleep deprivation, compared to healthy controls, and that CRY2 gene variation was associated with winter depression in both Swedish and Finnish cohorts.Four CRY2 SNPs spanning from intron 2 to downstream 3'UTR were analyzed for association to bipolar disorder type 1 (n = 497, bipolar disorder type 2 (n = 60 and bipolar disorder with the feature rapid cycling (n = 155 versus blood donors (n = 1044 in Sweden. Also, the rapid cycling cases were compared with bipolar disorder cases without rapid cycling (n = 422. The haplotype GGAC was underrepresented among rapid cycling cases versus controls and versus bipolar disorder cases without rapid cycling (OR = 0.7, P = 0.006-0.02, whereas overrepresentation among rapid cycling cases was seen for AAAC (OR = 1.3-1.4, P = 0.03-0.04 and AGGA (OR = 1.5, P = 0.05. The risk and protective CRY2 haplotypes and their effect sizes were similar to those recently suggested to be associated with winter depression in Swedes.We propose that the circadian gene CRY2 is associated with rapid cycling in bipolar disorder. This is the first time a clock gene is implicated in rapid cycling, and one of few findings showing a molecular discrimination between rapid cycling and other forms of bipolar disorder.

Kinetics, Stability, and Thermal Contact Resistance of Nickel–Ca3Co4O9 Interfaces Formed by Spark Plasma Sintering

DEFF Research Database (Denmark)

Holgate, Tim; Wu, NingYu; Søndergaard, M.

2013-01-01

3Co4O9) have been formed directly by spark plasma sintering (SPS). An intermediate NiO phase is formed during the SPS processes, which grows during post-heating with Co entering from the cobaltate side to form a graded Ni1xCoxO interfacial layer. The electrical and thermal transport across...

Breaking the wave. The contested legitimation of an alien organizational form

NARCIS (Netherlands)

Delmestri, G.; Wezel, F.C.

2011-01-01

Organizational forms imbued with values of modernity – that is, rationality, efficiency and equity – diffuse rapidly around the world. Nonetheless, when sustained by beliefs, norms and regulations contrasting with those prevalent in the receiving country, their adoption may be delayed, and

Cyber-physical attacks a growing invisible threat

CERN Document Server

Loukas, George

2015-01-01

Cyber-Physical Attacks: A Growing Invisible Threat presents the growing list of harmful uses of computers and their ability to disable cameras, turn off a building's lights, make a car veer off the road,  or a drone land in enemy hands. In essence, it details the ways cyber-physical attacks are replacing physical attacks in crime, warfare, and terrorism. The book explores how attacks using computers affect the physical world in ways that were previously only possible through physical means. Perpetrators can now cause damage without the same risk, and without the political, social, or moral

Mapping growing stock volume and forest live biomass: a case study of the Polissya region of Ukraine

Science.gov (United States)

Bilous, Andrii; Myroniuk, Viktor; Holiaka, Dmytrii; Bilous, Svitlana; See, Linda; Schepaschenko, Dmitry

2017-10-01

Forest inventory and biomass mapping are important tasks that require inputs from multiple data sources. In this paper we implement two methods for the Ukrainian region of Polissya: random forest (RF) for tree species prediction and k-nearest neighbors (k-NN) for growing stock volume and biomass mapping. We examined the suitability of the five-band RapidEye satellite image to predict the distribution of six tree species. The accuracy of RF is quite high: ~99% for forest/non-forest mask and 89% for tree species prediction. Our results demonstrate that inclusion of elevation as a predictor variable in the RF model improved the performance of tree species classification. We evaluated different distance metrics for the k-NN method, including Euclidean or Mahalanobis distance, most similar neighbor (MSN), gradient nearest neighbor, and independent component analysis. The MSN with the four nearest neighbors (k = 4) is the most precise (according to the root-mean-square deviation) for predicting forest attributes across the study area. The k-NN method allowed us to estimate growing stock volume with an accuracy of 3 m3 ha-1 and for live biomass of about 2 t ha-1 over the study area.

Development of Somatic Embryo Maturation and Growing Techniques of Norway Spruce Emblings towards Large-Scale Field Testing

Directory of Open Access Journals (Sweden)

Mikko Tikkinen

2018-06-01

Full Text Available The possibility to utilize non-additive genetic gain in planting stock has increased the interest towards vegetative propagation. In Finland, the increased planting of Norway spruce combined with fluctuant seed yields has resulted in shortages of improved regeneration material. Somatic embryogenesis is an attractive method to rapidly facilitate breeding results, not in the least, because juvenile propagation material can be cryostored for decades. Further development of technology for the somatic embryogenesis of Norway spruce is essential, as the high cost of somatic embryo plants (emblings limits deployment. We examined the effects of maturation media varying in abscisic acid (20, 30 or 60 µM and polyethylene glycol 4000 (PEG concentrations, as well as the effect of cryopreservation cycles on embryo production, and the effects of two growing techniques on embling survival and growth. Embryo production and nursery performance of 712 genotypes from 12 full-sib families were evaluated. Most embryos per gram of fresh embryogenic mass (296 ± 31 were obtained by using 30 µM abscisic acid without PEG in the maturation media. Transplanting the emblings into nursery after one-week in vitro germination resulted in 77% survival and the tallest emblings after the first growing season. Genotypes with good production properties were found in all families.

Both dietary supplementation with monosodium L-glutamate and fat modify circulating and tissue amino acid pools in growing pigs, but with little interactive effect.

Directory of Open Access Journals (Sweden)

Zemeng Feng

Full Text Available The Chinese population has undergone rapid transition to a high-fat diet. Furthermore, monosodium L-glutamate (MSG is widely used as a daily food additive in China. Little information is available on the effects of oral MSG and dietary fat supplementation on the amino acid balance in tissues. The present study aimed to determine the effects of both dietary fat and MSG on amino acid metabolism in growing pigs, and to assess any possible interactions between these two nutrients.Four iso-nitrogenous and iso-caloric diets (basal diet, high fat diet, basal diet with 3% MSG and high fat diet with 3% MSG were provided to growing pigs. The dietary supplementation with fat and MSG used alone and in combination were found to modify circulating and tissue amino acid pools in growing pigs. Both dietary fat and MSG modified the expression of gene related to amino acid transport in jejunum.Both dietary fat and MSG clearly influenced amino acid content in tissues but in different ways. Both dietary fat and MSG enhance the absorption of amino acids in jejunum. However, there was little interaction between the effects of dietary fat and MSG.

Formation of two-way shape memory effect in rapid-quenched TiNiCu alloys

International Nuclear Information System (INIS)

Shelyakov, A.V.; Bykovsky, Yu.A.; Matveeva, N.M.; Kovneristy, Yu.K.

1995-01-01

Recently we have developed a number of devices for an optical radiation control based on the shape memory effect. A blind of rapid-quenched TiNiCu alloy having a two-way shape memory in bending was used as a basic element. So far as the rapid quenched alloy used is amorphous in initial state, it needs thermal annealing to form shape memory. This paper describes procedure of thermo-mechanical treatment, that allows to form desired two-way shape memory immediately during thermal annealing of amorphous alloy without training. It was shown that degree of two-way shape recovery depends critically on initial strain, temperature and duration of the annealing. It was experimentally determined optimum parameters of thermo-mechanical treatment to achieve maximum two-way shape memory. (orig.)

Dissociation and Re-Aggregation of Multicell-Ensheathed Fragments Responsible for Rapid Production of Massive Clumps of Leptothrix Sheaths

Science.gov (United States)

Kunoh, Tatsuki; Nagaoka, Noriyuki; McFarlane, Ian R.; Tamura, Katsunori; El-Naggar, Mohamed Y.; Kunoh, Hitoshi; Takada, Jun

2016-01-01

Species of the Fe/Mn-oxidizing bacteria Leptothrix produce tremendous amounts of microtubular, Fe/Mn-encrusted sheaths within a few days in outwells of groundwater that can rapidly clog water systems. To understand this mode of rapid sheath production and define the timescales involved, behaviors of sheath-forming Leptothrix sp. strain OUMS1 were examined using time-lapse video at the initial stage of sheath formation. OUMS1 formed clumps of tangled sheaths. Electron microscopy confirmed the presence of a thin layer of bacterial exopolymer fibrils around catenulate cells (corresponding to the immature sheath). In time-lapse videos, numerous sheath filaments that extended from the periphery of sheath clumps repeatedly fragmented at the apex of the same fragment, the fragments then aggregated and again elongated, eventually forming a large sheath clump comprising tangled sheaths within two days. In this study, we found that fast microscopic fragmentation, dissociation, re-aggregation and re-elongation events are the basis of the rapid, massive production of Leptothrix sheaths typically observed at macroscopic scales. PMID:27490579

Growing Youth Growing Food: How Vegetable Gardening Influences Young People's Food Consciousness and Eating Habits

Science.gov (United States)

Libman, Kimberly

2007-01-01

Much attention is currently being paid to rising rates of obesity, especially among youth. In this context, garden-based education can have a role in improving public health. A qualitative study conducted at the Brooklyn Botanic Garden (BBG) Children's Garden provides supporting evidence for the claim that growing vegetables can improve the…

Preparation of silicon carbide nanowires via a rapid heating process

International Nuclear Information System (INIS)

Li Xintong; Chen Xiaohong; Song Huaihe

2011-01-01

Silicon carbide (SiC) nanowires were fabricated in a large quantity by a rapid heating carbothermal reduction of a novel resorcinol-formaldehyde (RF)/SiO 2 hybrid aerogel in this study. SiC nanowires were grown at 1500 deg. C for 2 h in an argon atmosphere without any catalyst via vapor-solid (V-S) process. The β-SiC nanowires were characterized by field-emission scanning electron microscope (FE-SEM), X-ray diffraction (XRD), transmission electron microscope (TEM), high-resolution transmission electron microscope (HRTEM) equipped with energy dispersive X-ray (EDX) facility, Fourier transformed infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). The analysis results show that the aspect ratio of the SiC nanowires via the rapid heating process is much larger than that of the sample produced via gradual heating process. The SiC nanowires are single crystalline β-SiC phase with diameters of about 20-80 nm and lengths of about several tens of micrometers, growing along the [1 1 1] direction with a fringe spacing of 0.25 nm. The role of the interpenetrating network of RF/SiO 2 hybrid aerogel in the carbothermal reduction was discussed and the possible growth mechanism of the nanowires is analyzed.

Rapid decay of tree-community composition in Amazonian forest fragments

Science.gov (United States)

Laurance, William F.; Nascimento, Henrique E. M.; Laurance, Susan G.; Andrade, Ana; Ribeiro, José E. L. S.; Giraldo, Juan Pablo; Lovejoy, Thomas E.; Condit, Richard; Chave, Jerome; Harms, Kyle E.; D'Angelo, Sammya

2006-01-01

Forest fragmentation is considered a greater threat to vertebrates than to tree communities because individual trees are typically long-lived and require only small areas for survival. Here we show that forest fragmentation provokes surprisingly rapid and profound alterations in Amazonian tree-community composition. Results were derived from a 22-year study of exceptionally diverse tree communities in 40 1-ha plots in fragmented and intact forests, which were sampled repeatedly before and after fragment isolation. Within these plots, trajectories of change in abundance were assessed for 267 genera and 1,162 tree species. Abrupt shifts in floristic composition were driven by sharply accelerated tree mortality and recruitment within ≈100 m of fragment margins, causing rapid species turnover and population declines or local extinctions of many large-seeded, slow-growing, and old-growth taxa; a striking increase in a smaller set of disturbance-adapted and abiotically dispersed species; and significant shifts in tree size distributions. Even among old-growth trees, species composition in fragments is being restructured substantially, with subcanopy species that rely on animal seed-dispersers and have obligate outbreeding being the most strongly disadvantaged. These diverse changes in tree communities are likely to have wide-ranging impacts on forest architecture, canopy-gap dynamics, plant–animal interactions, and forest carbon storage. PMID:17148598

ProteoWizard: open source software for rapid proteomics tools development.

Science.gov (United States)

Kessner, Darren; Chambers, Matt; Burke, Robert; Agus, David; Mallick, Parag

2008-11-01

The ProteoWizard software project provides a modular and extensible set of open-source, cross-platform tools and libraries. The tools perform proteomics data analyses; the libraries enable rapid tool creation by providing a robust, pluggable development framework that simplifies and unifies data file access, and performs standard proteomics and LCMS dataset computations. The library contains readers and writers of the mzML data format, which has been written using modern C++ techniques and design principles and supports a variety of platforms with native compilers. The software has been specifically released under the Apache v2 license to ensure it can be used in both academic and commercial projects. In addition to the library, we also introduce a rapidly growing set of companion tools whose implementation helps to illustrate the simplicity of developing applications on top of the ProteoWizard library. Cross-platform software that compiles using native compilers (i.e. GCC on Linux, MSVC on Windows and XCode on OSX) is available for download free of charge, at http://proteowizard.sourceforge.net. This website also provides code examples, and documentation. It is our hope the ProteoWizard project will become a standard platform for proteomics development; consequently, code use, contribution and further development are strongly encouraged.

A rapid qualitative assay for detection of Clostridium perfringens in canned food products.

Science.gov (United States)

Dave, Gayatri Ashwinkumar

2017-01-01

Clostridium perfringens (MTCC 1349) is a Gram-positive, anaerobic, endospore forming, and rod-shaped bacterium. This bacterium produces a variety of toxins under strict anaerobic environment. C. perfringens can grow at temperatures ranging between 20°C and 50°C. It is the major causetive agent for gas gangrene, cellulitis, septicemia, necrotic enteritis and food poisoning, which are common toxin induced conditions noted in human and animals. C. perfringens can produce produce four major types of toxins that are used for the classification of strains, classified under type A-E. Across the globe many countries, including the United States, are affected by C. perfringens food poisonings where it is ranked as one of the most common causes of food borne infections. To date, no direct one step assay for the detection of C. perfringens has been developed and only few methods are known for accurate detection of C. perfringens. Long detection and incubation time is the major consideration of these reporter assays. The prensent study proposes a rapid and reliable colorimetric assay for the detection of C. perfringens. In principale, this assay detects the para nitrophenyl (yellow colour end product) liberated due to the hydrolysis of paranitrophenyl phosphetidyl choline (PNPC) through phospholipase C (lecithinase). Constitutive secretion of phospholipase C is a charactristic feature of C. perfringens. This assay detects the presence of the extracellular lecithinse through the PNPC impragnated impregnated probe. The probe is impregnated with peranitrophenyl phosphotidyl choline ester, which is colourless substrate used by lecithinase. The designed assay is specific towards PNPC and detectes very small quantites of lecithinase under conditions used. The reaction is substrate specific, no cross reaction was observed upon incubation with other substrates. In addition, this assay gave negative results with other clostridium strains, no cross reactions were observed with other

Growing Pains

CERN Multimedia

Katarina Anthony

2013-01-01

Heat expands and cold contracts: it’s a simple thermodynamic rule. But when temperatures swing from 300 K to near-absolute zero, this rule can mean a contraction of more than 80 metres across the LHC’s 27-km-long cryogenic system. Keeping this growth in check are compensators (a.k.a. bellows), which shrink and stretch in response to thermodynamic changes. Leak tests and X-rays now underway in the tunnel have revealed that these “joints” might be suffering from growing pains…   This 25-μm weld crack is thought to be the cause of the helium leaks. Prior to the LS1 warm-up, CERN’s cryogenic experts knew of two points in the machine’s cryogenic distribution system that were leaking helium. Fortunately, these leaks were sufficiently small, confined to known sub-sectors of the cryogenic line and – with help from the vacuum team (TE-VSC) – could easily be compensated for. But as the machine warmed up f...

Cooking Banana Consumption Patterns in the Plantain-growing Area of Southeastern Nigeria

Directory of Open Access Journals (Sweden)

Tshiunza, M.

2001-01-01

Full Text Available Cooking bananas (Musa spp., ABB genome were intro-duced into Southeastern Nigeria by the International Institute of Tropical Agriculture (IITA in the mid-1980s as an interim measure to reduce the incidence of black sigatoka disease (caused by the fungus Mycosphaerel-la fijiensis Morelet on plantain. However, the people of this region were not familiar with their utilisation methods. To address this lack of the knowledge and thereby sustain cooking banana cultivation, IITA, in collaboration with the Shell Petroleum Development Company (SPDC and the Nigeria Agip OU Company (NAOC commenced a training campaign on cooking banana processing methods. This study examined the patterns of utilisation of cooking bananas ten years after the training took place and compared them with plantain. About 95 % of the households interviewed are consuming cooking banana, indicating a broad acceptance of the crop in the region. Overall, two ripening stages termed green and ripe are the most popular ripening stages for the consumption of both plantain and cooking banana, followed by partially ripe maturity stage. The most common forms of consumption for green plantain are, in decreasing order of importance, pottage, boiled, roasted, and fried. Green cooking banana is also mostly eaten in pottage and boiled forms, and less frequently in fried and pounded forms. Ripe plantain is mostly eaten in fried and pottage forms, while ripe cooking banana is mostly eaten in fried and raw forms. Partially ripe plantain is mostly eaten in pottage, fried, boiled, and roasted forms, while partially ripe cooking banana is eaten in fried, pottage and boiled forms. These results indicate that the consumption patterns of plantain and cooking banana are very similar. This similarity has greatly contributed to the rapid integration of cooking banana within the existing plantain consumption and cropping systems.

Rapid response systems.

Science.gov (United States)

Lyons, Patrick G; Edelson, Dana P; Churpek, Matthew M

2018-07-01

Rapid response systems are commonly employed by hospitals to identify and respond to deteriorating patients outside of the intensive care unit. Controversy exists about the benefits of rapid response systems. We aimed to review the current state of the rapid response literature, including evolving aspects of afferent (risk detection) and efferent (intervention) arms, outcome measurement, process improvement, and implementation. Articles written in English and published in PubMed. Rapid response systems are heterogeneous, with important differences among afferent and efferent arms. Clinically meaningful outcomes may include unexpected mortality, in-hospital cardiac arrest, length of stay, cost, and processes of care at end of life. Both positive and negative interventional studies have been published, although the two largest randomized trials involving rapid response systems - the Medical Early Response and Intervention Trial (MERIT) and the Effect of a Pediatric Early Warning System on All-Cause Mortality in Hospitalized Pediatric Patients (EPOCH) trial - did not find a mortality benefit with these systems, albeit with important limitations. Advances in monitoring technologies, risk assessment strategies, and behavioral ergonomics may offer opportunities for improvement. Rapid responses may improve some meaningful outcomes, although these findings remain controversial. These systems may also improve care for patients at the end of life. Rapid response systems are expected to continue evolving with novel developments in monitoring technologies, risk prediction informatics, and work in human factors. Copyright © 2018 Elsevier B.V. All rights reserved.

The philanthropy scale: a sociological perspective in measuring new forms of pro social behaviour

NARCIS (Netherlands)

Schuyt, T.N.M.; Bekkers, R.H.F.P.; Smit, J.H.

2010-01-01

In wealthy countries, philanthropy is conspicuous back on stage. It appears in new forms, worldwide. As a result, scholarly attention for philanthropy is growing. Philanthropic goals refer to persons, groups and communities who, in most cases, are not personally known to the giver. In research,

Inferences from growing trees backwards

Science.gov (United States)

David W. Green; Kent A. McDonald

1997-01-01

The objective of this paper is to illustrate how longitudinal stress wave techniques can be useful in tracking the future quality of a growing tree. Monitoring the quality of selected trees in a plantation forest could provide early input to decisions on the effectiveness of management practices, or future utilization options, for trees in a plantation. There will...

Rapid extraction and assay of uranium from environmental surface samples

Energy Technology Data Exchange (ETDEWEB)

Barrett, Christopher A.; Chouyyok, Wilaiwan; Speakman, Robert J.; Olsen, Khris B.; Addleman, Raymond Shane

2017-10-01

Extraction methods enabling faster removal and concentration of uranium compounds for improved trace and low-level assay are demonstrated for standard surface sampling material in support of nuclear safeguards efforts, health monitoring, and other nuclear analysis applications. A key problem with the existing surface sampling swipes is the requirement for complete digestion of sample and sampling matrix. This is a time-consuming and labour-intensive process that limits laboratory throughput, elevates costs, and increases background levels. Various extraction methods are explored for their potential to quickly and efficiently remove different chemical forms of uranium from standard surface sampling material. A combination of carbonate and peroxide solutions is shown to give the most rapid and complete form of uranyl compound extraction and dissolution. This rapid extraction process is demonstrated to be compatible with standard inductive coupled plasma mass spectrometry methods for uranium isotopic assay as well as screening techniques such as x-ray fluorescence. The general approach described has application beyond uranium to other analytes of nuclear forensic interest (e.g., rare earth elements and plutonium) as well as heavy metals for environmental and industrial hygiene monitoring.

Rapid Ordering in "Wet Brush" Block Copolymer/Homopolymer Ternary Blends.

Science.gov (United States)

Doerk, Gregory S; Yager, Kevin G

2017-12-26

The ubiquitous presence of thermodynamically unfavored but kinetically trapped topological defects in nanopatterns formed via self-assembly of block copolymer thin films may prevent their use for many envisioned applications. Here, we demonstrate that lamellae patterns formed by symmetric polystyrene-block-poly(methyl methacrylate) diblock copolymers self-assemble and order extremely rapidly when the diblock copolymers are blended with low molecular weight homopolymers of the constituent blocks. Being in the "wet brush" regime, the homopolymers uniformly distribute within their respective self-assembled microdomains, preventing increases in domain widths. An order-of-magnitude increase in topological grain size in blends over the neat (unblended) diblock copolymer is achieved within minutes of thermal annealing as a result of the significantly higher power law exponent for ordering kinetics in the blends. Moreover, the blends are demonstrated to be capable of rapid and robust domain alignment within micrometer-scale trenches, in contrast to the corresponding neat diblock copolymer. These results can be attributed to the lowering of energy barriers associated with domain boundaries by bringing the system closer to an order-disorder transition through low molecular weight homopolymer blending.

Degeneration of rapid eye movement sleep circuitry underlies rapid eye movement sleep behavior disorder.

Science.gov (United States)

McKenna, Dillon; Peever, John

2017-05-01

During healthy rapid eye movement sleep, skeletal muscles are actively forced into a state of motor paralysis. However, in rapid eye movement sleep behavior disorder-a relatively common neurological disorder-this natural process is lost. A lack of motor paralysis (atonia) in rapid eye movement sleep behavior disorder allows individuals to actively move, which at times can be excessive and violent. At first glance this may sound harmless, but it is not because rapid eye movement sleep behavior disorder patients frequently injure themselves or the person they sleep with. It is hypothesized that the degeneration or dysfunction of the brain stem circuits that control rapid eye movement sleep paralysis is an underlying cause of rapid eye movement sleep behavior disorder. The link between brain stem degeneration and rapid eye movement sleep behavior disorder stems from the fact that rapid eye movement sleep behavior disorder precedes, in the majority (∼80%) of cases, the development of synucleinopathies such as Parkinson's disease, dementia with Lewy bodies, and multiple system atrophy, which are known to initially cause degeneration in the caudal brain stem structures where rapid eye movement sleep circuits are located. Furthermore, basic science and clinical evidence demonstrate that lesions within the rapid eye movement sleep circuits can induce rapid eye movement sleep-specific motor deficits that are virtually identical to those observed in rapid eye movement sleep behavior disorder. This review examines the evidence that rapid eye movement sleep behavior disorder is caused by synucleinopathic neurodegeneration of the core brain stem circuits that control healthy rapid eye movement sleep and concludes that rapid eye movement sleep behavior disorder is not a separate clinical entity from synucleinopathies but, rather, it is the earliest symptom of these disorders. © 2017 International Parkinson and Movement Disorder Society. © 2017 International Parkinson and

Atomistic simulation of rapid compression of fractured silicon carbide

International Nuclear Information System (INIS)

Romano, A.; Li, J.; Yip, S.

2006-01-01

Deformation mechanisms of a crack in silicon carbide under high-rate compression are investigated by molecular dynamics simulation. The penny-shaped crack is in tension throughout the simulation while a variable compression is applied in an in-plane direction. Two different mechanisms of crack-tip response are observed: (1) At low tension, a disordered band forms from the crack surface in the direction orthogonal to the compression, which grows as the compressional force is increased in a manner suggesting a stress-induced transition from an ordered to a disordered phase. Moreover the crack is observed to close. (2) At a tension sufficient to allow the crack to remain open, the compressional stress induces formation of disordered regions along the boundaries of the opened crack, which grow and merge into a band as the compression proceeds. This process is driven by bending of the initial crack, which transforms into a curved slit. This mechanism induces incorporation of fragments of perfect crystal into the disordered band. Similar mechanisms have been experimentally observed to occur in porous SiC under high-strain rate compression

'Skills for growing up': supporting autonomy in young people with kidney disease.

Science.gov (United States)

Sattoe, Jane N T; Hilberink, Sander R; Peeters, Mariëlle A C; van Staa, AnneLoes

2014-06-01

End-stage kidney disease (ESKD) may interfere with children's developmental task of acquiring autonomy and participation. The Skills for Growing Up tool encourages normal development towards independence and autonomy during paediatric rehabilitation. This study aimed to adapt this self-management tool for use in paediatric nephrology, and to test whether its use is feasible in daily practice. A Delphi study was conducted among patients, their parents, professionals and experts to adjust the tool for use in nephrology. Feasibility was studied through individual and group interviews with professionals in all Dutch paediatric nephrology centres. Agreement was reached on the areas of social participation and medical management of ESKD. Compared with the original, the new instrument holds considerable more attention for autonomy in the renal healthcare area; for example, dealing with medication and transplantation. Professionals used and appreciated the tool, but the paper form was seen to limit feasibility. Making the tool available online is important. The challenge for professionals is to move beyond the focus on medical management and to consider developmental tasks when coaching their patients into adulthood. The Skills for Growing Up-Nephrology (SGU-N) tool is a promising instrument for use by professionals in paediatric nephrology. Its use can help young people achieving autonomy and may contribute to their successful transition to adulthood and adult care. © 2013 European Dialysis and Transplant Nurses Association/European Renal Care Association.

Skin bleaching: A neglected form of injury and threat to global skin ...

African Journals Online (AJOL)

Skin bleaching: A neglected form of injury and threat to global skin. JC Street, K Gaska, KM Lewis, ML Wilson. Abstract. Skin bleaching is the use of creams, gels, or soaps to lighten the skin and is known to cause a number of injuries, many of which are potentially life-threatening. Despite the growing body of research ...

Trapping Dust to Form Planets

Science.gov (United States)

Kohler, Susanna

2017-10-01

Growing a planet from a dust grain is hard work! A new study explores how vortices in protoplanetary disks can assist this process.When Dust Growth FailsTop: ALMA image of the protoplanetary disk of V1247 Orionis, with different emission components labeled. Bottom: Synthetic image constructed from the best-fit model. [Kraus et al. 2017]Gradual accretion onto a seed particle seems like a reasonable way to grow a planet from a grain of dust; after all, planetary embryos orbit within dusty protoplanetary disks, which provides them with plenty of fuel to accrete so they can grow. Theres a challenge to this picture, though: the radial drift problem.The radial drift problem acknowledges that, as growing dust grains orbit within the disk, the drag force on them continues to grow as well. For large enough dust grains perhaps around 1 millimeter the drag force will cause the grains orbits to decay, and the particles drift into the star before they are able to grow into planetesimals and planets.A Close-Up Look with ALMASo how do we overcome the radial drift problem in order to form planets? A commonly proposed mechanism is dust trapping, in which long-lived vortices in the disk trap the dust particles, preventing them from falling inwards. This allows the particles to persist for millions of years long enough to grow beyond the radial drift barrier.Observationally, these dust-trapping vortices should have signatures: we would expect to see, at millimeter wavelengths, specific bright, asymmetric structures where the trapping occurs in protoplanetary disks. Such disk structures have been difficult to spot with past instrumentation, but the Atacama Large Millimeter/submillimeter Array (ALMA) has made some new observations of the disk V1247 Orionis that might be just what were looking for.Schematic of the authors model for the disk of V1247 Orionis. [Kraus et al. 2017]Trapped in a Vortex?ALMAs observations of V1247 Orionis are reported by a team of scientists led by Stefan

Performance Of Growing Pigs And Finisher Broilers Housed Together

African Journals Online (AJOL)

Growth performance and cost of feeding young growing pigs and finisher broilers under integrated broiler/pig production system were investigated. Four young growing pigs (the control) were housed in pen A and fed 4% of their body weight as commercial growers feed. Another 4 were housed in pen B with broilers in ...

Growth and Economic Opportunities for Women (GrOW) Frequently ...

International Development Research Centre (IDRC) Digital Library (Canada)

Alejandra

GrOW will take a broad perspective on the types of questions and evidence on ... question; (2) set the outcome in the broader context of the underlying programme theory, ... Communications from the GrOW team with applicants during the ... There are specific criteria and application processes for this call that should be.

Comparison of four methods for rapid identification of Staphylococcus aureus directly from BACTEC 9240 blood culture system.

Science.gov (United States)

Ozen, N S; Ogunc, D; Mutlu, D; Ongut, G; Baysan, B O; Gunseren, F

2011-01-01

Differentiation of Staphylococcus aureus (S. aureus) from coagulase-negative staphylococci is very important in blood stream infections. Identification of S. aureus and coagulase-negative staphylococci (CoNS) from blood cultures takes generally 18-24 h after positive signaling on continuously monitored automated blood culture system. In this study, we evaluated the performance of tube coagulase test (TCT), slide agglutination test (Dry Spot Staphytect Plus), conventional polymerase chain reaction (PCR) and LightCycler Staphylococcus MGrade kit directly from blood culture bottles to achieve rapid identification of S. aureus by using the BACTEC 9240 blood culture system. A total of 129 BACTEC 9240 bottles growing gram-positive cocci suggesting Staphylococci were tested directly from blood culture broths (BCBs) with TCT, Dry Spot Staphytect Plus, conventional PCR and LightCycler Staphylococcus MGrade kit for rapid identification of S. aureus. The sensitivities of the tests were 99, 68, 99 and 100%, respectively. Our results suggested that 2 h TCT was found to be simple and inexpensive method for the rapid identification of S. aureus directly from positive blood cultures.

Material forming apparatus using a directed droplet stream

Science.gov (United States)

Holcomb, David E.; Viswanathan, Srinath; Blue, Craig A.; Wilgen, John B.

2000-01-01

Systems and methods are described for rapidly forming precision metallic and intermetallic alloy net shape parts directly from liquid metal droplets. A directed droplet deposition apparatus includes a crucible with an orifice for producing a jet of material, a jet destabilizer, a charging structure, a deflector system, and an impact zone. The systems and methods provide advantages in that fully dense, microstructurally controlled parts can be fabricated at moderate cost.

Rapid growth and childhood obesity are strongly associated with lysoPC(14:0).

Science.gov (United States)

Rzehak, Peter; Hellmuth, Christian; Uhl, Olaf; Kirchberg, Franca F; Peissner, Wolfgang; Harder, Ulrike; Grote, Veit; Weber, Martina; Xhonneux, Annick; Langhendries, Jean-Paul; Ferre, Natalia; Closa-Monasterolo, Ricardo; Verduci, Elvira; Riva, Enrica; Socha, Piotr; Gruszfeld, Dariusz; Koletzko, Berthold

2014-01-01

Despite the growing interest in the early-origins-of-later-disease hypothesis, little is known about the metabolic underpinnings linking infant weight gain and childhood obesity. To discover biomarkers reflective of weight change in the first 6 months and overweight/obesity at age 6 years via a targeted metabolomics approach. This analysis comprised 726 infants from a European multicenter randomized trial (Childhood Obesity Programme, CHOP) for whom plasma blood samples at age 6 months and anthropometric data up to the age of 6 years were available. 'Rapid growth' was defined as a positive difference in weight within the first 6 months of life standardized to WHO growth standards. Weight change was regressed on each of 168 metabolites (acylcarnitines, lysophosphatidylcholines, sphingomyelins, and amino acids). Metabolites significant after Bonferroni's correction were tested as predictors of later overweight/obesity. Among the overall 19 significant metabolites, 4 were associated with rapid growth and 15 were associated with a less-than-ideal weight change. After adjusting for feeding group, only the lysophosphatidylcholine LPCaC14:0 remained significantly associated with rapid weight gain (β = 0.18). Only LPCaC14:0 at age 6 months was predictive of overweight/obesity at age 6 years (OR 1.33; 95% CI 1.04-1.69). LPCa14:0 is strongly related to rapid growth in infancy and childhood overweight/obesity. This suggests that LPCaC14:0 levels may represent a metabolically programmed effect of infant weight gain on the later obesity risk. However, these results require confirmation by independent cohorts. © 2014 S. Karger AG, Basel.

Spectrophotometric Study of Ternary Complex Forming Systems of Some Lanthanide Metal Ions with Eriochrome Cyanine R in Presence of Cetylpyridinium Bromide for Microdetermination

Directory of Open Access Journals (Sweden)

A. S. Dhepe

2011-01-01

Full Text Available Study of coordination compounds of lanthanide elements has received a great attention due to growing applications in science and technology. Number of chromogenic reagents form water soluble colored complexes with lanthanides. Eriochrome cyanine R (ECR a member of triphenylmethane type of dye has been reported to form green colored complexes with lanthanides and has been used for microdetermination of these metal ions. Addition of cationic surfactant, Cetylpyridinium bromide (CPB, a cationic surfactant sensitizes the color reactions of Gd(III, Tb(III, Dy(III, Ho(III and Lu(III with ECR. Formation of water soluble, highly colored ternary complexes with a considerable bathochromic shift of about 50 nm in presence of surfactant has been observed. Optimum reaction conditions and other analytical parameters were also evaluated. Stoichiometric ratio 1:3:3 of Ln: ECR: CPB are responsible for the observed rise in molar absorptivity and sensitivity. Beer’s law was obeyed between 0.50 to 13.00 ppm. Effective photometric range and molar absorptivity of these ternary complexes have been calculated. Effect of some common interfering ions on determination of these lanthanide metal ions was studied. A simple, rapid and highly sensitive spectrophotometeric method has been proposed for the determination of metal ions understudy.

Rapidity distributions of hadrons in the HydHSD hybrid model

Energy Technology Data Exchange (ETDEWEB)

Khvorostukhin, A. S., E-mail: hvorost@theor.jinr.ru; Toneev, V. D. [Joint Institute for Nuclear Research (Russian Federation)

2017-03-15

A multistage hybrid model intended for describing heavy-ion interactions in the energy region of the NICA collider under construction in Dubna is proposed. The model combines the initial, fast, interaction stage described by the model of hadron string dynamics (HSD) and the subsequent evolution that the expanding system formed at the first stage experiences at the second stage and which one treats on the basis of ideal hydrodynamics; after the completion of the second stage, the particles involved may still undergo rescattering (third interaction stage). The model admits three freeze-out scenarios: isochronous, isothermal, and isoenergetic. Generally, the HydHSD hybrid model developed in the present study provides fairly good agreement with available experimental data on proton rapidity spectra. It is shown that, within this hybrid model, the two-humped structure of proton rapidity distributions can be obtained either by increasing the freeze-out temperature and energy density or by more lately going over to the hydrodynamic stage. Although the proposed hybrid model reproduces rapidity spectra of protons, it is unable to describe rapidity distributions of pions, systematically underestimating their yield. It is necessary to refine the model by including viscosity effects at the hydrodynamic stage of evolution of the system and by considering in more detail the third interaction stage.

Rapid lard identification with portable electronic nose

Science.gov (United States)

Latief, Marsad; Khorsidtalab, Aida; Saputra, Irwan; Akmeliawati, Rini; Nurashikin, Anis; Jaswir, Irwandi; Witjaksono, Gunawan

2017-11-01

Human sensory systems are limited in many different regards, yet they are great sources of inspiration for development of technologies that help humans to overcome their restraints. This paper signifies the capability of our developed electronic nose in rapid lard identification. The developed device, known as E-Nose, mimics human’s olfactory system’s technique to identify a particular substance. Lard is a common pig derivative which is often used as a food additive, emulsion or shortening. It’s also commonly used as an adulterant or as an alternative for cooking oils, margarine and butter. This substance is prohibited to be consumed by Muslims and Orthodox Jews for religious reasons. A portable reliable device with an ability to identify lard rapidly can be convenient to users concerned about lard adulteration. The prototype was examined using K-Nearest Neighbors algorithm (KNN), Support Vector Machine (SVM), Bagged Trees and Simple Tree, and can identify lard with the highest accuracy of 95.6% among three types of fat (lard, chicken and beef) in liquid form over a certain range of temperature using KNN.

Adults' memories of growing up in the Atomic Age

International Nuclear Information System (INIS)

Brody, P.J.

1987-01-01

This dissertation was an empirical, qualitative, cross-age study of sixteen adults who grew up during the formative years of the Atomic Ages. The research objectives were to (1) examine the childhood determinants of adult thinking about nuclear weapons and (2) understand media's role in molding perceptions of the nuclear threat. Participants' childhood recollections of world news events were elicited through in-depth interviews. These data were analyzed in light of prior research comparing the childhood feelings and experiences of eight subjects, born 1935-1945, to those of eight subjects, born 1945-1955. The study demonstrated that participants nuclear anxiety differed between the two ages groups due to experiences growing up during the years of World War II versus the Cold War years. All participants had learned about atomic weapons at an early age form the media, which continued to be their primary educator regarding the nuclear facts of life. Few subjects, as children, ever discussed concerns about nuclear weapons with their parents. Few subjects, as parents, discussed concerns about nuclear weapons with their children

JASAL Forum 2011: Growing Trends in Self-Access Learning

Directory of Open Access Journals (Sweden)

Azusa Kodate

2012-03-01

Full Text Available The annual JASAL forum was held in Tokyo in 2011 in keeping with the theme of the JALT 2011 conference, ‘Teaching, Learning, and Growing’.Drawing on the theme of this year’s JASAL forum, ‘Growing Trends in Self-Access Learning’, several different trends emerged from the two paper and five poster presentations that illustrate the ongoing growth of the field. Contents of the presentations varied widely from an administrative operation of a self-access centre (hereafter SAC to research findings about SAC users. Having approximately 45 people including presenters at the forum, active discussions in which they shared ideas and professional practices were generated. One of the common points which emerged in the forum was that the form of learning that SACs provide is becoming more accepted and valued by educational institutions, and this has led to an increase in the number of SACs nationwide in Japan. Against this background, three themes were evident in the presentations given at this year’s forum: focusing on the physical learning environment, providing easier access to learners, and supporting learning processes.

The virtual mass of a growing and collapsing bubble

International Nuclear Information System (INIS)

Abdullah Abbas Kendoush

2005-01-01

Full text of publication follows: The acceleration of bubbles are encountered in flash evaporation, that results form the hypothetical sudden depressurization of the primary cooling circuit of light water nuclear reactors. Bubble growth during flash evaporation is a transient phenomenon, leads to a virtual mass force that should be introduced into the equation of motion. The importance of the virtual mass concept was appreciated by many investigators. They demonstrated that the inclusion of the virtual mass effect into the numerical solution of the transient two-phase flow appears to improve numerical stability and efficiency, and to achieve accurate results in many cases of practical concern. Analytical solutions were obtained for the virtual mass coefficient of a growing and collapsing bubble at high and low Jakob numbers. The method of solution was similar to that used previously by the author [Physics of Fluids 15(2782- 2785)2003]. The present solution is valid by its asymptotic approach to the limit of the virtual mass coefficient of the constant volume bubble. (author)

Petroleum demand continues to grow but slowly

International Nuclear Information System (INIS)

Anon.

1998-01-01

While it is always entertaining and intellectually stimulating to look at all the marvelous technological alternatives just around the corner for transport, the transport task in Australia continues to grow and so does petroleum consumption. Australia presently consumes more than 750,000 barrels per day of petroleum products. Latest figures are given for petroleum consumption up to the end of August 1998. They indicate that total demand for petrol has continued to grow, but very slowly. Growth in 1997-1998 compared with 1996-1997 was only 0.3%. This trend for very low growth has been continued into July and August, perhaps indicative of a slow down in the economy

Faculty experiences with rapid integration of male nursing students within a patriarchal societal context.

Science.gov (United States)

Kulakac, Ozen; Arslan, Ilkay; Sucu Dag, Gülten; O'Lynn, Chad

2015-11-01

In 2007, reforms by the Turkish government forced a rapid integration of male nursing students into previously all-female schools. The minimal amount of time for faculty preparation, little guidance from nursing leaders and the extant literature, and a societal context of patriarchy created unique challenges for faculty. The purpose of this qualitative study was to explore and interpret the experiences of nursing faculty as they adapted to the sudden inclusion of men in schools of nursing. A qualitative descriptive study Nine schools from six regions across Turkey 99 nursing faculty who were 22 to 55years of age, primarily female (97.8%), married (65.6%). Focus groups were used to collect data. Data were analyzed using constant comparison and tripartite discussion. Analysis yielded three categories, seven themes, and seven subthemes describing variable experiences, perceptions, and adaptive strategies. The findings presented contradictions characterized by both optimism and concern following the rapid infusion of men into schools of nursing. Concerns primarily centered on the state of gender relations in a larger patriarchal society. The findings foster reflection and discourse as societies characterized by relatively rigid and traditional gender roles confront rapid cultural change and growing calls for diversity within nursing. Copyright © 2015 Elsevier Ltd. All rights reserved.

Biowaiver monograph for immediate-release solid oral dosage forms: bisoprolol fumarate.

Science.gov (United States)

Charoo, Naseem A; Shamsher, Areeg A A; Lian, Lai Y; Abrahamsson, Bertil; Cristofoletti, Rodrigo; Groot, D W; Kopp, Sabine; Langguth, Peter; Polli, James; Shah, Vinod P; Dressman, Jennifer

2014-02-01

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate-release (IR) solid oral dosage forms containing bisoprolol as the sole active pharmaceutical ingredient (API) are reviewed. Bisoprolol is classified as a Class I API according to the current Biopharmaceutics Classification System (BCS). In addition to the BCS class, its therapeutic index, pharmacokinetic properties, data related to the possibility of excipient interactions, and reported BE/bioavailability problems are taken into consideration. Qualitative compositions of IR tablet dosage forms of bisoprolol with a marketing authorization (MA) in ICH (International Conference on Harmonisation) countries are tabulated. It was inferred that these tablets had been demonstrated to be bioequivalent to the innovator product. No reports of failure to meet BE standards have been made in the open literature. On the basis of all these pieces of evidence, a biowaiver can currently be recommended for bisoprolol fumarate IR dosage forms if (1) the test product contains only excipients that are well known, and used in normal amounts, for example, those tabulated for products with MA in ICH countries and (2) both the test and comparator dosage form are very rapidly dissolving, or, rapidly dissolving with similarity of the dissolution profiles demonstrated at pH 1.2, 4.5, and 6.8. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

On the mechanics of thin films and growing surfaces

KAUST Repository

Holland, M. A.

2013-05-24

Many living structures are coated by thin films, which have distinct mechanical properties from the bulk. In particular, these thin layers may grow faster or slower than the inner core. Differential growth creates a balanced interplay between tension and compression and plays a critical role in enhancing structural rigidity. Typical examples with a compressive outer surface and a tensile inner core are the petioles of celery, caladium, or rhubarb. While plant physiologists have studied the impact of tissue tension on plant rigidity for more than a century, the fundamental theory of growing surfaces remains poorly understood. Here, we establish a theoretical and computational framework for continua with growing surfaces and demonstrate its application to classical phenomena in plant growth. To allow the surface to grow independently of the bulk, we equip it with its own potential energy and its own surface stress. We derive the governing equations for growing surfaces of zero thickness and obtain their spatial discretization using the finite-element method. To illustrate the features of our new surface growth model we simulate the effects of growth-induced longitudinal tissue tension in a stalk of rhubarb. Our results demonstrate that different growth rates create a mechanical environment of axial tissue tension and residual stress, which can be released by peeling off the outer layer. Our novel framework for continua with growing surfaces has immediate biomedical applications beyond these classical model problems in botany: it can be easily extended to model and predict surface growth in asthma, gastritis, obstructive sleep apnoea, brain development, and tumor invasion. Beyond biology and medicine, surface growth models are valuable tools for material scientists when designing functionalized surfaces with distinct user-defined properties. © The Author(s) 2013.

Rapidly reconfigurable all-optical universal logic gate

Science.gov (United States)

Goddard, Lynford L.; Bond, Tiziana C.; Kallman, Jeffrey S.

2010-09-07

A new reconfigurable cascadable all-optical on-chip device is presented. The gate operates by combining the Vernier effect with a novel effect, the gain-index lever, to help shift the dominant lasing mode from a mode where the laser light is output at one facet to a mode where it is output at the other facet. Since the laser remains above threshold, the speed of the gate for logic operations as well as for reprogramming the function of the gate is primarily limited to the small signal optical modulation speed of the laser, which can be on the order of up to about tens of GHz. The gate can be rapidly and repeatedly reprogrammed to perform any of the basic digital logic operations by using an appropriate analog optical or electrical signal at the gate selection port. Other all-optical functionality includes wavelength conversion, signal duplication, threshold switching, analog to digital conversion, digital to analog conversion, signal routing, and environment sensing. Since each gate can perform different operations, the functionality of such a cascaded circuit grows exponentially.

Cell dualism: presence of cells with alternative membrane potentials in growing populations of bacteria and yeasts.

Science.gov (United States)

Ivanov, Volodymyr; Rezaeinejad, Saeid; Chu, Jian

2013-10-01

It is considered that all growing cells, for exception of acidophilic bacteria, have negatively charged inside cytoplasmic membrane (Δψ⁻-cells). Here we show that growing populations of microbial cells contain a small portion of cells with positively charged inside cytoplasmic membrane (Δψ⁺-cells). These cells were detected after simultaneous application of the fluorescent probes for positive membrane potential (anionic dye DIBAC⁻) and membrane integrity (propidium iodide, PI). We found in exponentially growing cell populations of Escherichia coli and Saccharomyces cerevisiae that the content of live Δψ⁻-cells was 93.6 ± 1.8 % for bacteria and 90.4 ± 4.0 % for yeasts and the content of live Δψ⁺-cells was 0.9 ± 0.3 % for bacteria and 2.4 ± 0.7 % for yeasts. Hypothetically, existence of Δψ⁺-cells could be due to short-term, about 1 min for bacteria and 5 min for yeasts, change of membrane potential from negative to positive value during the cell cycle. This change has been shown by the reversions of K⁺, Na⁺, and Ca²⁺ ions fluxes across the cell membrane during synchronous yeast culture. The transformation of Δψ(⁻-cells to Δψ⁺-cells can be explained by slow influx of K⁺ ions into Δψ⁻-cell to the trigger level of K⁺ concentration ("compression of potassium spring"), which is forming "alternative" Δψ⁺-cell for a short period, following with fast efflux of K⁺ ions out of Δψ⁺-cell ("release of potassium spring") returning cell to normal Δψ⁻ state. We anticipate our results to be a starting point to reveal the biological role of cell dualism in form of Δψ⁻- and Δψ⁺- cells.

A Multi-Level Approach to Modeling Rapidly Growing Mega-Regions as a Coupled Human-Natural System

Science.gov (United States)

Koch, J. A.; Tang, W.; Meentemeyer, R. K.

2013-12-01

concept of our modeling approach and describe its strengths and weaknesses. We furthermore use empirical data for the states of North and South Carolina to demonstrate how the modeling framework can be applied to a large, heterogeneous study system with diverse decision-making agents. Grimm et al. (2005) Pattern-Oriented Modeling of Agent-Based Complex Systems: Lessons from Ecology. Science 310, 987-991. Liu et al. (2013) Framing Sustainability in a Telecoupled World. Ecology and Society 18(2), 26. Meentemeyer et al. (2013) FUTURES: Multilevel Simulations of Merging Urban-Rural Landscape Structure Using a Stochastic Patch-Growing Algorithm. Annals of the Association of American Geographers 103(4), 785-807.

Growing Up in Poverty, Growing Old in Infirmity: The Long Arm of Childhood Conditions in Great Britain.

Directory of Open Access Journals (Sweden)

Gindo Tampubolon

Full Text Available The ageing population poses a tremendous challenge in understanding the sources of inequalities in health. Though they appear to be far removed, childhood conditions are known to be inextricably linked with adult health, and in turn on health in later life. The long arm of childhood conditions hypothesis is often tested using recollection of childhood circumstances, but such subjective recall can yield potentially inaccurate or possibly biased inferences. We tested the long arm hypothesis on three outcomes in later life, arrayed from objective to subjective health, namely: gait speed, episodic memory and mental health.We used the English Longitudinal Study of Ageing 2006 enriched with retrospective life history (N = 5,913. To deal with recall problems two solutions, covariate measurement and endogenous treatment models, were applied. Retrospective childhood material lack includes growing up without running hot or cold water, fixed bath, indoor lavatory and central heating. Adjustment is made for an extensive set of confounders including sex, age, adult health, wealth, education, occupation, social support, social connections, chronic conditions, smoking, drinking, and physical exercise. It is found that material poverty when growing up shows no association with health when growing old, assuming accurate recall. Once recall problems are controlled, we found that childhood material poverty changes inversely with later life health.A poorer childhood goes with slower gait, poorer memory and more depression in later life. This result provides a further impetus to eliminate child poverty.

Bulletin of Materials Science | News

Indian Academy of Sciences (India)

Struvite or magnesium ammonium phosphate hexahydrate (MAP) is one of the components of urinary stone. Struvite stones are commonly found in women. It forms in human beings as a result of urinary tract infection with urea splitting organisms. These stones can grow rapidly forming “staghorn-calculi”, which is a painful ...

Rapid development in vitro and in vivo of resistance to ceftazidime in biofilm-growing Pseudomonas aeruginosa due to chromosomal beta-lactamase

DEFF Research Database (Denmark)

Bagge, N; Ciofu, O; Skovgaard, L T

2000-01-01

The aim of this study was to examine the development of resistance of biofilm-growing P. aeruginosa during treatment with ceftazidime. Biofilms were established in vitro using a modified Robbins device (MRD) and in vivo in the rat model of chronic lung infection. Three P. aeruginosa strains...... of ceftazidime to biofilms established in MDR, a statistically significant development of resistance to ceftazidime in PAO 579 or 19676A bacterial populations occurred. When ceftazidime was administered 4 h/day (200 mg/l) for 2 weeks, the frequency of resistant 19676A having MIC>25 mg/l was 4.4 10(-1) compared...... to 6.0-10(-5) in the control biofilm. The same trend was observed after continuous administration of ceftazidime. MICceftazidime of the more resistant variants was increased 500-fold for PAO 579 and 8-fold for 19676A, and the specific basal beta-lactamase activities from 19 to 1,400 units for PAO 579...

Glass Forming Ability in Systems with Competing Orderings

Science.gov (United States)

Russo, John; Romano, Flavio; Tanaka, Hajime

2018-04-01

Some liquids, if cooled rapidly enough to avoid crystallization, can be frozen into a nonergodic glassy state. The tendency for a material to form a glass when quenched is called "glass-forming ability," and it is of key significance both fundamentally and for materials science applications. Here, we consider liquids with competing orderings, where an increase in the glass-forming ability is signaled by a depression of the melting temperature towards its minimum at triple or eutectic points. With simulations of two model systems where glass-forming ability can be tuned by an external parameter, we are able to interpolate between crystal-forming and glass-forming behavior. We find that the enhancement of the glass-forming ability is caused by an increase in the structural difference between liquid and crystal: stronger competition in orderings towards the melting point minimum makes a liquid structure more disordered (more complex). This increase in the liquid-crystal structure difference can be described by a single adimensional parameter, i.e., the interface energy cost scaled by the thermal energy, which we call the "thermodynamic interface penalty." Our finding may provide a general physical principle for not only controlling the glass-forming ability but also the emergence of glassy behavior of various systems with competing orderings, including orderings of structural, magnetic, electronic, charge, and dipolar origin.

On the exfoliating polymeric cellular dosage forms for immediate drug release.

Science.gov (United States)

Blaesi, Aron H; Saka, Nannaji

2016-06-01

The most prevalent pharmaceutical dosage forms at present-the oral immediate-release tablets and capsules-are granular solids. Though effective in releasing drug rapidly, development and manufacture of such dosage forms are fraught with difficulties inherent to particulate processing. Predictable dosage form manufacture could be achieved by liquid-based processing, but cast solid dosage forms are not suitable for immediate drug release due to their resistance to fluid percolation. To overcome this limitation, we have recently introduced cellular dosage forms that can be readily prepared from polymeric melts. It has been shown that open-cell structures comprising polyethylene glycol 8000 (PEG 8k) excipient and a drug exfoliate upon immersion in a dissolution medium. The drug is then released rapidly due to the large specific surface area of the exfoliations. In this work, we vary the molecular weight of the PEG excipient and investigate its effect on the drug release kinetics of structures with predominantly open-cell topology. We demonstrate that the exfoliation rate decreases substantially if the excipient molecular weight is increased from 12 to 100kg/mol, which causes the drug dissolution time to increase by more than a factor of ten. A model is then developed to elucidate the exfoliation behavior of cellular structures. Diverse transport processes are considered: percolation due to capillarity, diffusion of dissolution medium through the cell walls, and viscous flow of the saturated excipient. It is found that the lower exfoliation rate and the longer dissolution time of the dosage forms with higher excipient molecular weight are primarily due to the greater viscosity of the cell walls after fluid penetration. Copyright © 2016 Elsevier B.V. All rights reserved.

Use of rapid-scan EPR to improve detection sensitivity for spin-trapped radicals.

Science.gov (United States)

Mitchell, Deborah G; Rosen, Gerald M; Tseitlin, Mark; Symmes, Breanna; Eaton, Sandra S; Eaton, Gareth R

2013-07-16

The short lifetime of superoxide and the low rates of formation expected in vivo make detection by standard continuous wave (CW) electron paramagnetic resonance (EPR) challenging. The new rapid-scan EPR method offers improved sensitivity for these types of samples. In rapid-scan EPR, the magnetic field is scanned through resonance in a time that is short relative to electron spin relaxation times, and data are processed to obtain the absorption spectrum. To validate the application of rapid-scan EPR to spin trapping, superoxide was generated by the reaction of xanthine oxidase and hypoxanthine with rates of 0.1-6.0 μM/min and trapped with 5-tert-butoxycarbonyl-5-methyl-1-pyrroline-N-oxide (BMPO). Spin trapping with BMPO to form the BMPO-OOH adduct converts the very short-lived superoxide radical into a more stable spin adduct. There is good agreement between the hyperfine splitting parameters obtained for BMPO-OOH by CW and rapid-scan EPR. For the same signal acquisition time, the signal/noise ratio is >40 times higher for rapid-scan than for CW EPR. Rapid-scan EPR can detect superoxide produced by Enterococcus faecalis at rates that are too low for detection by CW EPR. Copyright © 2013 Biophysical Society. Published by Elsevier Inc. All rights reserved.

Crystal habit, characterization and pharmacological activity of various crystal forms of arteether

Directory of Open Access Journals (Sweden)

Renu Chadha

2011-08-01

Full Text Available The aim of this study was to investigate and characterize different crystal forms of arteether, a rapidly acting, highly potent antimalarial drug for the treatment of acute Plasmodium falciparum malaria. Six different crystal forms were prepared utilizing various polar and non-polar solvents. Scanning electron microscopy (SEM revealed differences in the surface characteristics of the six forms from those of a commercial sample. Differential scanning calorimetry (DSC revealed the absence of a desolvation endotherm indicating that the forms were neither hydrates nor solvates. Powder X-ray diffraction (PXRD patterns of the forms showed much weaker major peaks than in the commercial sample indicating them to be less crystalline. Solubility and dissolution studies showed that the most amorphous form was the most soluble and possessed the highest antimalarial activity.

Experimental visualization of rapid maneuvering fish

Science.gov (United States)

Daigh, S.; Techet, A. H.

2003-11-01

A freshwater tropical fish, Danio aequippinatus, is studied undergoing rapid turning and fast starting maneuvers. This agile species of fish is ideal for this study as it is capable of quick turning and darting motions up to 5g's. The fgish studied are 4-5 cm in length. The speed and kinematics of the maneuvering is determined by video analysis. Planar and stereo Particle Image Velocimetry (PIV) is used to map the vortical patterns in the wake of the maneuvering fish. PIV visualizations reveal that during C-shaped maneuvers a ring shaped jet vortex is formed. Fast starting behavior is also presented. PIV data is used to approixmate the thrust vectoring force produced during each maneuver.

TUTORIAL: Focused-ion-beam-based rapid prototyping of nanoscale magnetic devices

Science.gov (United States)

Khizroev, S.; Litvinov, D.

2004-03-01

In this tutorial, focused-ion-beam (FIB)-based fabrication is considered from a very unconventional angle. FIB is considered not as a fabrication tool that can be used for mass production of electronic devices, similar to optical and E-beam—based lithography, but rather as a powerful tool to rapidly fabricate individual nanoscale magnetic devices for prototyping future electronic applications. Among the effects of FIB-based fabrication of magnetic devices, the influence of Ga+-ion implantation on magnetic properties is presented. With help of magnetic force microscopy (MFM), it is shown that there is a critical doze of ions that a magnetic material can be exposed to without experiencing a change in the magnetic properties. Exploiting FIB from such an unconventional perspective is especially favourable today when the future of so many novel technologies depends on the ability to rapidly fabricate prototype nanoscale magnetic devices. As one of the most illustrative examples, the multi-billion-dollar data storage industry is analysed as the technology field that strongly benefited from implementing FIB in the above-described role. The essential role of FIB in the most recent trend of the industry towards perpendicular magnetic recording is presented. Moreover, other emerging and fast-growing technologies are considered as examples of nanoscale technologies whose future could strongly depend on the implementation of FIB in the role of a nanoscale fabrication tool for rapid prototyping. Among the other described technologies are 'ballistic' magnetoresistance, patterned magnetic media, magnetoresistive RAM (MRAM), and magnetic force microscopy.

Rapid enumeration of low numbers of moulds in tea based drinks using an automated system.

Science.gov (United States)

Tanaka, Kouichi; Yamaguchi, Nobuyasu; Baba, Takashi; Amano, Norihide; Nasu, Masao

2011-01-31

Aseptically prepared cold drinks based on tea have become popular worldwide. Contamination of these drinks with harmful microbes is a potential health problem because such drinks are kept free from preservatives to maximize aroma and flavour. Heat-tolerant conidia and ascospores of fungi can survive pasteurization, and need to be detected as quickly as possible. We were able to rapidly and accurately detect low numbers of conidia and ascospores in tea-based drinks using fluorescent staining followed by an automated counting system. Conidia or ascospores were inoculated into green tea and oolong tea, and samples were immediately filtered through nitrocellulose membranes (pore size: 0.8 μm) to concentrate fungal propagules. These were transferred onto potato dextrose agar and incubated for 23 h at 28 °C. Fungi germinating on the membranes were fluorescently stained for 30 min. The stained mycelia were counted selectively within 90s using an automated counting system (MGS-10LD; Chuo Electric Works, Osaka, Japan). Very low numbers (1 CFU/100ml) of conidia or ascospores could be rapidly counted, in contrast to traditional labour intensive techniques. All tested mould strains were detected within 24h while conventional plate counting required 72 h for colony enumeration. Counts of slow-growing fungi (Cladosporium cladosporioides) obtained by automated counting and by conventional plate counting were close (r(2) = 0.986). Our combination of methods enables counting of both fast- and slow-growing fungi, and should be useful for microbiological quality control of tea-based and also other drinks. Copyright © 2011 Elsevier B.V. All rights reserved.

Growing media alternatives for forest and native plant nurseries

Science.gov (United States)

Thomas D. Landis; Nancy Morgan

2009-01-01

The choice of growing medium, along with container type, is one of the critical decisions that must be made when starting a nursery. The first growing medium was called "compost" and was developed in the 1930s at the John Innes Horticultural Institute in Great Britain. It consisted of a loam soil that was amended with peat moss, sand, and fertilizers (Bunt...

Hp Ge: Purification, crystal growth, and annealing properties

International Nuclear Information System (INIS)

Hall, R.N.

1984-01-01

The prospects for growing HP Ge crystals of increased size and purity are examined. One interesting approach is to grow dislocation-free crystals, which must then be annealed to reduce the concentration of V 2 H traps. The phenomena which occur during annealing are discussed and compared with experiment. Hydrogen, present in atomic form at the growth temperature, forms H 2 molecules during cooling, causing the effective diffusion coefficient to decrease rapidly. Models representing the reactions between H and the V 2 H, A(H, Si), and D(H,O) complexes are presented and analyzed

Influence of growing conditions on heavy metals content in cultivated mushrooms

International Nuclear Information System (INIS)

Kmitene, L.

1997-01-01

The aim of the research was to investigate the influence of growing terms, microclimate conditions and growing medium on the mushroom harvest and quality. Champignons were grown according to the Polish technology. Pleurotus ostreatus was grown in perforate sacks using chopped wheat straw. Mycelium was sowed in different terms. It was established that the harvest of mushrooms, especially their quality, depends not only on growing conditions, but also on the kind of mushrooms, composte quality, mushroom size (diameter of cap), picking of mushrooms, storage time and other conditions. The technology of mushroom growing will be developed after studying all the factors determining the content of heavy metals and radiation in mushrooms

GRoW Buffalo Final Report

Energy Technology Data Exchange (ETDEWEB)

Bohm, Martha [Univ. at Buffalo, NY (United States)

2016-04-17

This document provides final reporting on the GRoW Home, University at Buffalo's entry to the 2015 Solar Decathlon competition in Irvine, CA. The report summarizes fundraising efforts, documents media outreach, lists online presence, analyzes the organizer's communication, describes post-competition life of the house and future employment plans for student team members. Last, it suggests improvements for future decathlons.

Effect of dietary iron loading on recognition memory in growing rats.

Directory of Open Access Journals (Sweden)

Murui Han

Full Text Available While nutritional and neurobehavioral problems are associated with both iron deficiency during growth and overload in the elderly, the effect of iron loading in growing ages on neurobehavioral performance has not been fully explored. To characterize the role of dietary iron loading in memory function in the young, weanling rats were fed iron-loading diet (10,000 mg iron/kg diet or iron-adequate control diet (50 mg/kg for one month, during which a battery of behavioral tests were conducted. Iron-loaded rats displayed elevated non-heme iron levels in serum and liver, indicating a condition of systemic iron overload. In the brain, non-heme iron was elevated in the prefrontal cortex of iron-loaded rats compared with controls, whereas there was no difference in iron content in other brain regions between the two diet groups. While iron loading did not alter motor coordination or anxiety-like behavior, iron-loaded rats exhibited a better recognition memory, as represented by an increased novel object recognition index (22% increase from the reference value than control rats (12% increase; P=0.047. Western blot analysis showed an up-regulation of dopamine receptor 1 in the prefrontal cortex from iron-loaded rats (142% increase; P=0.002. Furthermore, levels of glutamate receptors (both NMDA and AMPA and nicotinic acetylcholine receptor (nAChR were significantly elevated in the prefrontal cortex of iron-loaded rats (62% increase in NR1; 70% increase in Glu1A; 115% increase in nAChR. Dietary iron loading also increased the expression of NMDA receptors and nAChR in the hippocampus. These results support the idea that iron is essential for learning and memory and further reveal that iron supplementation during developmental and rapidly growing periods of life improves memory performance. Our investigation also demonstrates that both cholinergic and glutamatergic neurotransmission pathways are regulated by dietary iron and provides a molecular basis for the

Rapid Synthesis and Formation Mechanism of Core-Shell-Structured La-Doped SrTiO3 with a Nb-Doped Shell

Directory of Open Access Journals (Sweden)

Nam-Hee Park

2015-07-01

Full Text Available To provide a convenient and practical synthesis process for metal ion doping on the surface of nanoparticles in an assembled nanostructure, core-shell-structured La-doped SrTiO3 nanocubes with a Nb-doped surface layer were synthesized via a rapid synthesis combining a rapid sol-precipitation and hydrothermal process. The La-doped SrTiO3 nanocubes were formed at room temperature by a rapid dissolution of NaOH pellets during the rapid sol-precipitation process, and the Nb-doped surface (shell along with Nb-rich edges formed on the core nanocubes via the hydrothermal process. The formation mechanism of the core-shell-structured nanocubes and their shape evolution as a function of the Nb doping level were investigated. The synthesized core-shell-structured nanocubes could be arranged face-to-face on a SiO2/Si substrate by a slow evaporation process, and this nanostructured 10 μm thick thin film showed a smooth surface.

Low cost technology for the rapid and safe in-house (hospital-based) preparation of dual - radiotherapeutic (Rx) and radiodiagnostic (Dx) - dosage forms of high specific activity 131I-mIBG for clinical application

International Nuclear Information System (INIS)

Noronha, O.P.D.; Sonawane, G.A.; Samuel, A.M.

1998-01-01

Radioiodinated mIBG is finding increasing utility in nuclear medicine. However, its widespread use in developing countries is precluded by logistic constraints owing to the relative instability of the labelled molecule with respect to time and temp., and high costs. This prompted us to develop a low cost in-house batch process technology that could be used for the small-scale preparation of 131 I-mIBG even in a less equipped hospital-based radiopharmacy. The production of large amounts of 131 I-mIBG for clinical use requires sophisticated infrastructure (a scarce resource) to contain / safeguard against internal and external radiation exposures. We have indigenously designed a semi-automated, self-shielded, remote-controlled and safe microplant + process assemblies using easily accessible and cheap inputs, and developed the complete technology for the rapid and safe production of dual dosage forms of 131 I-mIBG, a radiotherapeutic (R x ) single dosage form of high activity along with 1-3 low activity radiodiagnostics (D x ) as multidosage forms. The radioiodide exchange reaction was effected in the solid / melt phase at 190 deg. C in 1.0 h. The radiolabelling yield was ∼80.0-86.0%, and the radiochemical purity > 99.5% and specific activity of R x /D x =900-1300/60-800 MBq ( x dosage forms at 3 weeks. The dosage forms (especially R x ) were only made against firm patient appointment(s). Thus far we have prepared 14 R x (49.0 GBq) and 70 + 14 batches (43.43 GBq) of (∼150 nos.) D x forms, and used them in 14 and > 1100 patients respectively. (author)

How Rapid is Rapid Prototyping? Analysis of ESPADON Programme Results

Directory of Open Access Journals (Sweden)

Ian D. Alston

2003-05-01

Full Text Available New methodologies, engineering processes, and support environments are beginning to emerge for embedded signal processing systems. The main objectives are to enable defence industry to field state-of-the-art products in less time and with lower costs, including retrofits and upgrades, based predominately on commercial off the shelf (COTS components and the model-year concept. One of the cornerstones of the new methodologies is the concept of rapid prototyping. This is the ability to rapidly and seamlessly move from functional design to the architectural design to the implementation, through automatic code generation tools, onto real-time COTS test beds. In this paper, we try to quantify the term “rapid” and provide results, the metrics, from two independent benchmarks, a radar and sonar beamforming application subset. The metrics show that the rapid prototyping process may be sixteen times faster than a conventional process.

Temperature and humidity control in growing of greenhouse muskmelon

Energy Technology Data Exchange (ETDEWEB)

Suzuki, Tetsuji; Nakamura, shin' ichi; Toda, Mikihiko; Ozawa, Akihito

1986-12-25

At the Shizuoka Agricultural Experiment Station, a control test of muskmelon was carried out wherein the controlled night temperature was automatically lowered by 2 or 4 /sup 0/C from the present temperature when the sunlight level was below the standard, and the humidity was controlled either individually or in combination with the temperature. Concerning the influence of temperature, no bad effect was observed in the constant early half of midnight temperature (18 /sup 0/C) section which was tested from the viewpoint of energy saving. For the test range of 22 - 18 /sup 0/C (winter growing) and 24 - 18 /sup 0/C (autumn growing), there was no significant difference on the fruit weight and shape;but the content of suger was found better in the complex modified temperature section of 22 - 18 /sup 0/C (winter growing) and 24 - 22 /sup 0/C (autumn growing). As for the humidity-added section, the fruit grew bigger, but the sugar content was significantly reduced. Optimal target value of control was estimated at 80 +-5 % daytime and 90 % night-time. (2 figs, 11 tabs, 10 refs

Rapid changes in water hardness and alkalinity: Calcite formation is lethal to Daphnia magna.

Science.gov (United States)

Bogart, Sarah J; Woodman, Samuel; Steinkey, Dylan; Meays, Cindy; Pyle, Greg G

2016-07-15

There is growing concern that freshwater ecosystems may be negatively affected by ever-increasing anthropogenic inputs of extremely hard, highly alkaline effluent containing large quantities of Ca(2+), Mg(2+), CO3(2-), and HCO3(-) ions. In this study, the toxicity of rapid and extreme shifts in water hardness (38-600mg/L as CaCO3) and alkalinity (30-420mg/L as CaCO3) to Daphnia magna was tested, both independently and in combination. Within these ranges, where no precipitation event occurred, shifts in water hardness and/or alkalinity were not toxic to D. magna. In contrast, 98-100% of D. magna died within 96h after exposure to 600mg/L as CaCO3 water hardness and 420mg/L as CaCO3 alkalinity (LT50 of 60h with a 95% CI of 54.2-66.0h). In this treatment, a CaCO3 (calcite) precipitate formed in the water column which was ingested by and thoroughly coated the D. magna. Calcite collected from a mining impacted stream contained embedded organisms, suggesting field streams may also experience similar conditions and possibly increased mortality as observed in the lab tests. Although further investigation is required to determine the exact fate of aquatic organisms exposed to rapid calcite precipitation in the field, we caution that negative effects may occur more quickly or at lower concentrations of water hardness and alkalinity in which we observed effects in D. magna, because some species, such as aquatic insects, are more sensitive than cladocerans to changes in ionic strength. Our results provide evidence that both calcite precipitation and the major ion balance of waters should be managed in industrially affected ecosystems and we support the development of a hardness+alkalinity guideline for the protection of aquatic life. Crown Copyright © 2016. Published by Elsevier B.V. All rights reserved.